diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/README.md b/Rifles/AR-15_Treillage_Stock-Warfairy/README.md new file mode 100644 index 0000000..83ab449 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/README.md @@ -0,0 +1,44 @@ +# Treillage AR-15 Competition Stock + +#### Version +1.0 + +#### Author +Warfairy + +#### Description + +The Treillage AR-15 Competition Stock is meant to bring a low cost option to NRA High Power competition and 3-Gun for fully adjustable stocks. The milled ones I've seen go for 180 USD or more. What it does is give you a fully adjustable stock, including length of pull, camber, and cast. The clamp around the tube allows the user to move the stock arm 360 degrees around the buffer tube, the clamp around the stock arm allows the user to adjust the length of pull and angle of the rear plate, and finally, the rear plate is adjusted using a threaded rod to move the rear plate up and down in relation to the stock arm. You can now truly make your rifle fit your body with around 15 USD worth of materials. + +#### Required parts + +* 8x M3 16mm Socket Head Cap Screw (McMaster part number 95263A158) +* 8x Type 316 Stainless Steel Belleville Spring Lock Washer (McMaster part number 93237A102) +* 8x Zinc Yellow-Chromate Plated Steel Hex Nut (McMaster part number 92497A200) + +#### Printing + +All of the individual parts should be relatively easy prints. Ensure your support is on as there are overhangs on most of the parts. + +#### Assembly + +1. Place Rear_Adjust into slot of Arm. The threaded section should sit inside the channel of the Arm. + +2. Place Rear_Plate onto Arm assembly and thread Rear_Adjust into threaded tab of Rear_Plate, drawing it down until the top and bottom surfaces of Arm and Rear_Plate are approximately level. + +3. Place Base_2 onto the underside of your Carbine Buffer Tube, making sure that the peg rests in the rear most adjustment hole of the Buffer Tube Rail. Now Place Base_1 onto the top of the buffer tube such that the grooves in the Base align. + +4. Place Clamp_2 over the Base ring, ensuring smooth mating of the ridges with the grooves. Do the same with Clamp_1. Secure losely by placing nuts into appropriate slots in Clamp_1, and threading 16mm M3 screws and washers to clamp in place. + +5. Install Clamp_3 onto buffer tube assembly using same method as Clamp_1 and 2. Leave loose. Slide Arm Assembly into the clamp and lightly tighten Clamp assmebly onto the Arm. + +6. Adjust stock as desired. When optimum position is attained, tighten down all 8 M3 screws to lock in place. Rear_Plate may be adjusted using a coin or large screw driver. Installation is complete. + +#### Author's notes + +I really like this one, and I hope it works. All credit to duces of the #FOSSCAD channel on irc.oftc.net for the idea. If you have questions, concerns, gripes, complaints, or just want to talk to us, swing by www.fosscad.org/fc/chat + +As always, + +You are free men. Act like it. +-WarFairy diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.10.jpg b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.10.jpg new file mode 100644 index 0000000..59fbefe Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.10.jpg differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.11.jpg b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.11.jpg new file mode 100644 index 0000000..bcbbec3 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.11.jpg differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.8.jpg b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.8.jpg new file mode 100644 index 0000000..6aaf437 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.8.jpg differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.9.jpg b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.9.jpg new file mode 100644 index 0000000..a8abb97 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.9.jpg differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Arm.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Arm.SLDPRT new file mode 100644 index 0000000..ab81c92 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Arm.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_1.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_1.SLDPRT new file mode 100644 index 0000000..b8bd7b1 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_1.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_2.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_2.SLDPRT new file mode 100644 index 0000000..5a57631 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_2.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_1.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_1.SLDPRT new file mode 100644 index 0000000..a802275 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_1.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_2.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_2.SLDPRT new file mode 100644 index 0000000..a918ea0 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_2.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_3.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_3.SLDPRT new file mode 100644 index 0000000..7b6e4c2 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_3.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Adjust.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Adjust.SLDPRT new file mode 100644 index 0000000..acbcf92 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Adjust.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Plate.SLDPRT b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Plate.SLDPRT new file mode 100644 index 0000000..829ce67 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Plate.SLDPRT differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Arm.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Arm.step new file mode 100644 index 0000000..bbeea99 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Arm.step @@ -0,0 +1,3057 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Arm.step', + '2016-04-19T10:44:24', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = EDGE_LOOP ( 'NONE', ( #1284, #2076, #1525, #2168 ) ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #2263, #407, #639 ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 19.05000000000000100, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#4 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #905, .T. ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 8.052697117567953800, -25.38632191270632500, 15.30082764289217900 ) ) ; +#7 = PLANE ( 'NONE', #2089 ) ; +#8 = EDGE_LOOP ( 'NONE', ( #1414, #2662, #2103 ) ) ; +#9 = EDGE_CURVE ( 'NONE', #2236, #757, #2867, .T. ) ; +#10 = EDGE_CURVE ( 'NONE', #2778, #499, #1640, .T. ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #2492, .F. ) ; +#12 = ADVANCED_FACE ( 'NONE', ( #2273 ), #1584, .F. ) ; +#13 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#14 = AXIS2_PLACEMENT_3D ( 'NONE', #497, #2122, #736 ) ; +#15 = ORIENTED_EDGE ( 'NONE', *, *, #2171, .F. ) ; +#16 = FACE_OUTER_BOUND ( 'NONE', #2712, .T. ) ; +#17 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18 = DIRECTION ( 'NONE', ( 1.000000000000000000, 6.938893903907228400E-016, 0.0000000000000000000 ) ) ; +#19 = CIRCLE ( 'NONE', #638, 2.500000000000002200 ) ; +#20 = AXIS2_PLACEMENT_3D ( 'NONE', #485, #1180, #258 ) ; +#21 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ; +#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23 = CYLINDRICAL_SURFACE ( 'NONE', #2980, 2.500000000000000400 ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 9.977845322659399900, 48.68044691650690200, 17.47792825948262400 ) ) ; +#25 = CIRCLE ( 'NONE', #1100, 2.500000000000002200 ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( -7.817541634481457900, 50.79999999999999700, 14.99999999999999800 ) ) ; +#27 = EDGE_LOOP ( 'NONE', ( #2697, #1481, #2065, #1436, #2814, #2845 ) ) ; +#28 = EDGE_CURVE ( 'NONE', #1353, #1991, #2796, .T. ) ; +#29 = ADVANCED_FACE ( 'NONE', ( #422 ), #487, .F. ) ; +#30 = FACE_OUTER_BOUND ( 'NONE', #539, .T. ) ; +#31 = DIRECTION ( 'NONE', ( -0.4329004329004327900, 0.9014417425405915100, 6.255008612042414800E-016 ) ) ; +#32 = LINE ( 'NONE', #593, #1795 ) ; +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34 = AXIS2_PLACEMENT_3D ( 'NONE', #2485, #1788, #1339 ) ; +#35 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .T. ) ; +#36 = EDGE_LOOP ( 'NONE', ( #2893, #533, #565, #1258 ) ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 50.79999999999999700, -17.50000000000000400 ) ) ; +#38 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .F. ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531200, 6.082251082251080900, 34.89999999999995600 ) ) ; +#40 = ADVANCED_FACE ( 'NONE', ( #2190 ), #347, .T. ) ; +#41 = EDGE_LOOP ( 'NONE', ( #1682, #1205, #1839 ) ) ; +#42 = PLANE ( 'NONE', #567 ) ; +#43 = EDGE_LOOP ( 'NONE', ( #284, #1570, #1600 ) ) ; +#44 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ; +#45 = EDGE_CURVE ( 'NONE', #1991, #2127, #2734, .T. ) ; +#46 = EDGE_CURVE ( 'NONE', #2337, #1924, #963, .T. ) ; +#47 = FACE_OUTER_BOUND ( 'NONE', #1477, .T. ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 32.39999999999995600 ) ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ; +#50 = CIRCLE ( 'NONE', #1503, 2.500000000000002200 ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -47.20000000000003100, 9.999999999999994700 ) ) ; +#52 = FACE_OUTER_BOUND ( 'NONE', #36, .T. ) ; +#53 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54 = ADVANCED_FACE ( 'NONE', ( #1499 ), #274, .T. ) ; +#55 = SURFACE_STYLE_FILL_AREA ( #2232 ) ; +#56 = AXIS2_PLACEMENT_3D ( 'NONE', #2692, #611, #852 ) ; +#57 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.982541115402064100E-016 ) ) ; +#58 = LINE ( 'NONE', #1019, #1824 ) ; +#59 = VECTOR ( 'NONE', #2250, 1000.000000000000000 ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( -15.59948156386135300, 50.74558836369041600, 8.290602356070191800 ) ) ; +#61 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ; +#62 = CIRCLE ( 'NONE', #2097, 14.05000000000000600 ) ; +#63 = EDGE_CURVE ( 'NONE', #66, #696, #2655, .T. ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 149.9000000000000100 ) ) ; +#65 = EDGE_CURVE ( 'NONE', #2513, #2806, #2117, .T. ) ; +#66 = VERTEX_POINT ( 'NONE', #316 ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 48.29999999999999700, 17.50000000000000400 ) ) ; +#68 = AXIS2_PLACEMENT_3D ( 'NONE', #197, #1801, #423 ) ; +#69 = ADVANCED_FACE ( 'NONE', ( #814 ), #1463, .F. ) ; +#70 = ORIENTED_EDGE ( 'NONE', *, *, #2857, .T. ) ; +#71 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#72 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ; +#73 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2536, #2060, #235, #1832, #457, #2075, #691, #2309, #925, #2545, #1161, #2765, #1393, #6, #1617, #240 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005693863809462899900, 0.001138772761892580000, 0.001708159142838870000, 0.002277545523785160000, 0.003416318285677736900, 0.003985704666624029100, 0.004555091047570321600 ), + .UNSPECIFIED. ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 48.29999999999999700, 10.00000000000000500 ) ) ; +#75 = AXIS2_PLACEMENT_3D ( 'NONE', #633, #2702, #2487 ) ; +#76 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.156482317317871500E-016 ) ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #2531, .T. ) ; +#78 = VERTEX_POINT ( 'NONE', #1686 ) ; +#79 = DIRECTION ( 'NONE', ( -0.4329004329004325100, 0.9014417425405916200, 0.0000000000000000000 ) ) ; +#80 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 2.023844055306274700E-015, -25.39999999999999900, 17.49999999999999600 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( -10.72997610268160600, 15.74215971711084800, 20.76174131750420000 ) ) ; +#83 = ORIENTED_EDGE ( 'NONE', *, *, #2020, .F. ) ; +#84 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 34.89999999999995600 ) ) ; +#86 = ADVANCED_FACE ( 'NONE', ( #2587 ), #535, .T. ) ; +#87 = TOROIDAL_SURFACE ( 'NONE', #1445, 11.55000000000000200, 2.500000000000000000 ) ; +#88 = AXIS2_PLACEMENT_3D ( 'NONE', #628, #2255, #869 ) ; +#89 = FACE_OUTER_BOUND ( 'NONE', #396, .T. ) ; +#90 = VERTEX_POINT ( 'NONE', #1472 ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( -15.35430021065975700, 11.28616332741139400, 24.69207924142519400 ) ) ; +#92 = CIRCLE ( 'NONE', #2355, 2.500000000000000000 ) ; +#93 = CIRCLE ( 'NONE', #783, 7.500000000000000000 ) ; +#94 = EDGE_LOOP ( 'NONE', ( #1130, #2404, #574, #1767 ) ) ; +#95 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #360, .NOT_KNOWN. ) ; +#96 = LINE ( 'NONE', #2376, #641 ) ; +#97 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#98 = ADVANCED_FACE ( 'NONE', ( #740 ), #135, .F. ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 17.33227492390912900, 49.21735224922268500, 9.833757152386365200 ) ) ; +#100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -19.04989891402420800, -0.4875992130404374600, 24.83810693346002200 ) ) ; +#102 = EDGE_CURVE ( 'NONE', #1388, #2295, #1371, .T. ) ; +#103 = EDGE_CURVE ( 'NONE', #2473, #2324, #1966, .T. ) ; +#104 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .F. ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 2.500000000000000000, 152.4000000000000100 ) ) ; +#106 = EDGE_LOOP ( 'NONE', ( #1569, #2810, #2771 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -10.41165212634383300, 34.89999999999995600 ) ) ; +#108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#109 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .T. ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( -15.05773643994832300, -11.67858135279448300, 24.59843928715265400 ) ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .F. ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 2.500000000000000000, 34.89999999999995600 ) ) ; +#113 = AXIS2_PLACEMENT_3D ( 'NONE', #2791, #2108, #724 ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, -22.89999999999999900, -17.50000000000000400 ) ) ; +#115 = VERTEX_POINT ( 'NONE', #559 ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 50.79999999999999700, -17.49999999999999600 ) ) ; +#117 = VERTEX_POINT ( 'NONE', #1943 ) ; +#118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#119 = DIRECTION ( 'NONE', ( 3.829144158930879800E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#120 = VECTOR ( 'NONE', #1141, 1000.000000000000000 ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( -10.46403693321966700, -15.91910602665806000, 20.10793752027293000 ) ) ; +#122 = ORIENTED_EDGE ( 'NONE', *, *, #1048, .T. ) ; +#123 = EDGE_CURVE ( 'NONE', #1813, #504, #1883, .T. ) ; +#124 = EDGE_CURVE ( 'NONE', #2837, #710, #2054, .T. ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -47.20000000000003100, 17.49999999999999600 ) ) ; +#126 = LINE ( 'NONE', #51, #2518 ) ; +#127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( -16.88947346982401100, -24.54533984291375500, 9.411941210245069900 ) ) ; +#129 = AXIS2_PLACEMENT_3D ( 'NONE', #771, #1004, #2160 ) ; +#130 = CIRCLE ( 'NONE', #2911, 2.500000000000002200 ) ; +#131 = LINE ( 'NONE', #378, #896 ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 14.00811872035465600, -12.91229006413062000, 24.13995099748067500 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 2.499999999999999600, 34.89999999999995600 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000000, 34.89999999999995600 ) ) ; +#135 = CYLINDRICAL_SURFACE ( 'NONE', #1837, 2.500000000000000400 ) ; +#136 = LINE ( 'NONE', #2489, #59 ) ; +#137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#140 = FACE_OUTER_BOUND ( 'NONE', #1321, .T. ) ; +#141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, -22.89999999999999900, 17.50000000000000000 ) ) ; +#143 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .T. ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 18.44765712429654100, -4.777327280019670200, 24.94071612590795400 ) ) ; +#145 = VERTEX_POINT ( 'NONE', #114 ) ; +#146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#147 = AXIS2_PLACEMENT_3D ( 'NONE', #2057, #669, #1590 ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.000000000000000900, 34.89999999999995600 ) ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #1887, .F. ) ; +#150 = VERTEX_POINT ( 'NONE', #1720 ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -7.933790589234991600, -25.40000000000000200, 15.15002851521657900 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 17.50493054752211500, 7.531025651058361500, 25.00217639895232900 ) ) ; +#153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#154 = ORIENTED_EDGE ( 'NONE', *, *, #1248, .F. ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383500, 4.999999999999999100, 34.89999999999995600 ) ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #1763, .F. ) ; +#158 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#159 = AXIS2_PLACEMENT_3D ( 'NONE', #1124, #2728, #1356 ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #2444, .F. ) ; +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#163 = VECTOR ( 'NONE', #2045, 1000.000000000000000 ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 12.28879836402696800, 14.56114382308494400, 22.91062023879662800 ) ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -10.41165212634383300, 32.39999999999995600 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080900, 12.66525648269531800, 149.9000000000000100 ) ) ; +#167 = VECTOR ( 'NONE', #944, 1000.000000000000000 ) ; +#168 = EDGE_CURVE ( 'NONE', #1773, #1217, #58, .T. ) ; +#169 = EDGE_CURVE ( 'NONE', #199, #1174, #2543, .T. ) ; +#170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( 17.39391438536100400, -23.64434042829266500, 9.894540175320750900 ) ) ; +#172 = FACE_OUTER_BOUND ( 'NONE', #1007, .T. ) ; +#173 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#174 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #1641, #2110 ) ; +#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#176 = CIRCLE ( 'NONE', #2385, 2.500000000000000000 ) ; +#177 = ORIENTED_EDGE ( 'NONE', *, *, #275, .T. ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 16.21426840779441400, 17.49999999999999600 ) ) ; +#179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#180 = LINE ( 'NONE', #429, #1932 ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 48.29999999999999700, 17.49999999999999600 ) ) ; +#182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383300, 32.39999999999995600 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -5.000000000000000900, 32.39999999999995600 ) ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531100, -6.082251082251083600, 32.39999999999995600 ) ) ; +#186 = ORIENTED_EDGE ( 'NONE', *, *, #2042, .T. ) ; +#187 = EDGE_CURVE ( 'NONE', #267, #2251, #1297, .T. ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -8.673617379884035500E-016, 152.4000000000000100 ) ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .T. ) ; +#190 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #718, .T. ) ; +#192 = AXIS2_PLACEMENT_3D ( 'NONE', #1348, #2038, #1113 ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#194 = ORIENTED_EDGE ( 'NONE', *, *, #2219, .F. ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -4.336808689942017700E-016, 152.4000000000000100 ) ) ; +#196 = ORIENTED_EDGE ( 'NONE', *, *, #839, .T. ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 152.4000000000000100 ) ) ; +#198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#199 = VERTEX_POINT ( 'NONE', #2663 ) ; +#200 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, -0.0000000000000000000 ) ) ; +#201 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.156482317317871500E-016 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 8.050705648155748400, 50.80000000000001800, 15.30091669068903400 ) ) ; +#203 = VECTOR ( 'NONE', #201, 1000.000000000000000 ) ; +#204 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .T. ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#207 = TOROIDAL_SURFACE ( 'NONE', #729, 9.999999999999998200, 2.500000000000000000 ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -19.04999999999999700, 0.0000000000000000000 ) ) ; +#209 = ORIENTED_EDGE ( 'NONE', *, *, #2693, .F. ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -13.82579111660523100, 34.89999999999995600 ) ) ; +#211 = CIRCLE ( 'NONE', #526, 2.500000000000000400 ) ; +#212 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #2942 ) ; +#213 = EDGE_CURVE ( 'NONE', #2251, #1474, #594, .T. ) ; +#214 = EDGE_CURVE ( 'NONE', #2281, #431, #32, .T. ) ; +#215 = LINE ( 'NONE', #829, #1963 ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999999100, 149.9000000000000100 ) ) ; +#217 = VECTOR ( 'NONE', #1708, 1000.000000000000000 ) ; +#218 = CIRCLE ( 'NONE', #2299, 11.55000000000000200 ) ; +#219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#220 = VECTOR ( 'NONE', #595, 1000.000000000000000 ) ; +#221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #2650, .F. ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #2018, #636, #2261 ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .F. ) ; +#225 = DIRECTION ( 'NONE', ( -1.486905836551548300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #2633, .F. ) ; +#227 = EDGE_CURVE ( 'NONE', #2031, #336, #2441, .T. ) ; +#228 = EDGE_CURVE ( 'NONE', #2710, #477, #1186, .T. ) ; +#229 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .F. ) ; +#230 = ADVANCED_FACE ( 'NONE', ( #560 ), #1123, .F. ) ; +#231 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881000E-017, 0.0000000000000000000 ) ) ; +#232 = ORIENTED_EDGE ( 'NONE', *, *, #1048, .F. ) ; +#233 = AXIS2_PLACEMENT_3D ( 'NONE', #1120, #2726, #1352 ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #2948, .T. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 9.977845042407310000, -23.28044930966249700, 17.47792798127923700 ) ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ; +#237 = AXIS2_PLACEMENT_3D ( 'NONE', #655, #2276, #892 ) ; +#238 = FACE_OUTER_BOUND ( 'NONE', #441, .T. ) ; +#239 = LINE ( 'NONE', #2782, #167 ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 7.817541634481461400, -25.39999999999999900, 14.99999999999999600 ) ) ; +#241 = FACE_OUTER_BOUND ( 'NONE', #2528, .T. ) ; +#242 = ADVANCED_FACE ( 'NONE', ( #2957 ), #1714, .F. ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#244 = CIRCLE ( 'NONE', #2082, 2.500000000000000400 ) ; +#245 = AXIS2_PLACEMENT_3D ( 'NONE', #1787, #409, #2023 ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ; +#247 = VECTOR ( 'NONE', #2746, 1000.000000000000000 ) ; +#248 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#249 = CARTESIAN_POINT ( 'NONE', ( -8.050705648155139100, 50.80000000000000400, 15.30091669068949800 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#251 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .F. ) ; +#252 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #360 ) ) ; +#253 = ADVANCED_FACE ( 'NONE', ( #2340 ), #2000, .F. ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .F. ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 48.29999999999999700, 17.49999999999999600 ) ) ; +#256 = VERTEX_POINT ( 'NONE', #1766 ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( -8.988506966194030700, 50.37967146279927300, 16.42337344322062600 ) ) ; +#258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#259 = VERTEX_POINT ( 'NONE', #2472 ) ; +#260 = EDGE_CURVE ( 'NONE', #1386, #2314, #2409, .T. ) ; +#261 = EDGE_CURVE ( 'NONE', #1898, #827, #2275, .T. ) ; +#262 = ORIENTED_EDGE ( 'NONE', *, *, #2857, .F. ) ; +#263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 6.938893903907228400E-016, 0.0000000000000000000 ) ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383200, 152.4000000000000100 ) ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #1418, .F. ) ; +#266 = FACE_OUTER_BOUND ( 'NONE', #2463, .T. ) ; +#267 = VERTEX_POINT ( 'NONE', #2246 ) ; +#268 = ADVANCED_FACE ( 'NONE', ( #491, #2871 ), #1036, .T. ) ; +#269 = LINE ( 'NONE', #1638, #2647 ) ; +#270 = DIRECTION ( 'NONE', ( -1.486905836551548300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#271 = FACE_OUTER_BOUND ( 'NONE', #1907, .T. ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#273 = LINE ( 'NONE', #2208, #1496 ) ; +#274 = TOROIDAL_SURFACE ( 'NONE', #756, 5.000000000000000000, 2.500000000000000000 ) ; +#275 = EDGE_CURVE ( 'NONE', #2101, #1812, #427, .T. ) ; +#276 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#277 = EDGE_CURVE ( 'NONE', #2668, #654, #1646, .T. ) ; +#278 = CIRCLE ( 'NONE', #1662, 14.05000000000000600 ) ; +#279 = CIRCLE ( 'NONE', #1473, 2.500000000000002200 ) ; +#280 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#281 = AXIS2_PLACEMENT_3D ( 'NONE', #1467, #1692, #1231 ) ; +#282 = ADVANCED_FACE ( 'NONE', ( #2799 ), #967, .F. ) ; +#283 = EDGE_LOOP ( 'NONE', ( #104, #160, #2635, #224 ) ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #1313, .T. ) ; +#285 = AXIS2_PLACEMENT_3D ( 'NONE', #2610, #2373, #2831 ) ; +#286 = VERTEX_POINT ( 'NONE', #2722 ) ; +#287 = DIRECTION ( 'NONE', ( -1.982541115402064400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( -16.42337344322064400, 50.37967146279929400, 8.988506966194036000 ) ) ; +#289 = ORIENTED_EDGE ( 'NONE', *, *, #885, .F. ) ; +#290 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .T. ) ; +#291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #142, #2212, #2665, #369, #1981, #597, #2224, #836, #2452, #1067, #2675, #1309, #2906, #1529, #151, #1757 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005693863809462899900, 0.001138772761892580000, 0.001708159142838870200, 0.002277545523785160000, 0.003416318285677736900, 0.003985704666624028200, 0.004555091047570319000 ), + .UNSPECIFIED. ) ; +#292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#293 = ADVANCED_FACE ( 'NONE', ( #2738 ), #903, .F. ) ; +#294 = ORIENTED_EDGE ( 'NONE', *, *, #1611, .F. ) ; +#295 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #1139, #2144 ) ; +#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#297 = ORIENTED_EDGE ( 'NONE', *, *, #2079, .F. ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#300 = FACE_OUTER_BOUND ( 'NONE', #2066, .T. ) ; +#301 = TOROIDAL_SURFACE ( 'NONE', #1462, 5.000000000000000000, 2.500000000000000000 ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -8.673617379884035500E-016, 149.9000000000000100 ) ) ; +#303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#304 = CIRCLE ( 'NONE', #1131, 2.500000000000000400 ) ; +#305 = AXIS2_PLACEMENT_3D ( 'NONE', #2282, #898, #2514 ) ; +#306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#307 = ADVANCED_FACE ( 'NONE', ( #2121 ), #2036, .T. ) ; +#308 = CIRCLE ( 'NONE', #1616, 2.500000000000002200 ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -19.04999999999999700, -17.50000000000000400 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( -11.43983591665006800, 15.23569074353777200, 21.94228315458764200 ) ) ; +#311 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#312 = VECTOR ( 'NONE', #442, 1000.000000000000000 ) ; +#313 = EDGE_CURVE ( 'NONE', #976, #1565, #350, .T. ) ; +#314 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#315 = EDGE_CURVE ( 'NONE', #730, #2288, #1505, .T. ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -25.39999999999999900, -17.50000000000000400 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 2.500000000000000000, 149.9000000000000100 ) ) ; +#318 = AXIS2_PLACEMENT_3D ( 'NONE', #1884, #2131, #1659 ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #2421, .T. ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -29.05000000000000400, -2.836047814137364000E-021 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( -16.16483403001488700, 10.09143637022954100, 24.88441601490228200 ) ) ; +#323 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .T. ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -1.109585399036061300E-015, 149.9000000000000100 ) ) ; +#325 = ADVANCED_FACE ( 'NONE', ( #2058 ), #1127, .T. ) ; +#326 = AXIS2_PLACEMENT_3D ( 'NONE', #1513, #138, #1739 ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, 152.4010000000000100 ) ) ; +#328 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #735, .F. ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( 17.47792825948263500, 48.68044691650691600, 9.977845322659394600 ) ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( -18.95667824152045700, -1.945249664365894300, 24.85727792112186700 ) ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ; +#333 = EDGE_CURVE ( 'NONE', #847, #2513, #279, .T. ) ; +#334 = EDGE_LOOP ( 'NONE', ( #1573, #2749, #2093, #2828 ) ) ; +#335 = DIRECTION ( 'NONE', ( -0.4329004329004333400, -0.9014417425405911700, -0.0000000000000000000 ) ) ; +#336 = VERTEX_POINT ( 'NONE', #1797 ) ; +#337 = CIRCLE ( 'NONE', #2829, 16.55000000000000100 ) ; +#338 = AXIS2_PLACEMENT_3D ( 'NONE', #2507, #653, #891 ) ; +#339 = ORIENTED_EDGE ( 'NONE', *, *, #776, .T. ) ; +#340 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#341 = FACE_OUTER_BOUND ( 'NONE', #1299, .T. ) ; +#342 = ORIENTED_EDGE ( 'NONE', *, *, #2549, .F. ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, 48.29999999999999700, 17.50000000000000000 ) ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -14.15569477176369300, -12.75632844258082200, 24.22254055695532700 ) ) ; +#345 = VECTOR ( 'NONE', #1261, 1000.000000000000000 ) ; +#346 = FACE_OUTER_BOUND ( 'NONE', #1229, .T. ) ; +#347 = TOROIDAL_SURFACE ( 'NONE', #453, 5.000000000000000000, 2.500000000000000000 ) ; +#348 = CIRCLE ( 'NONE', #1211, 19.05000000000000100 ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 10.04796474348398000, -16.18496185904596600, 18.47450148117816600 ) ) ; +#350 = CIRCLE ( 'NONE', #537, 5.000000000000000000 ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( -10.24620306570663300, -16.06002810544424300, 19.42090066665321400 ) ) ; +#352 = EDGE_CURVE ( 'NONE', #2962, #1813, #1435, .T. ) ; +#353 = EDGE_CURVE ( 'NONE', #464, #117, #822, .T. ) ; +#354 = VERTEX_POINT ( 'NONE', #834 ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -16.42336188904445400, -24.97967966108459900, 8.988496734622156500 ) ) ; +#356 = VERTEX_POINT ( 'NONE', #2674 ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, 50.79999999999999700, 0.0000000000000000000 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 14.47174587657789500, -12.39053053643899600, 24.36355745318172300 ) ) ; +#359 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#360 = PRODUCT ( 'Trellais_Arm', 'Trellais_Arm', '', ( #705 ) ) ; +#361 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .F. ) ; +#362 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.469446951953614200E-016, 0.0000000000000000000 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 2.499999999999999600, 152.4000000000000100 ) ) ; +#364 = VERTEX_POINT ( 'NONE', #1066 ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#366 = AXIS2_PLACEMENT_3D ( 'NONE', #622, #2009, #866 ) ; +#367 = ORIENTED_EDGE ( 'NONE', *, *, #2079, .T. ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( -3.469446951953611400E-015, 50.79999999999999700, -17.49999999999999300 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( -9.894540175320752700, -23.64434042829267600, 17.39391438536100400 ) ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 18.75849603487694500, -3.354718140586363100, 24.89402956975626000 ) ) ; +#372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#373 = ORIENTED_EDGE ( 'NONE', *, *, #904, .F. ) ; +#374 = EDGE_CURVE ( 'NONE', #364, #1980, #2196, .T. ) ; +#375 = EDGE_CURVE ( 'NONE', #2473, #1831, #743, .T. ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -5.000000000000000900, 149.9000000000000100 ) ) ; +#377 = LINE ( 'NONE', #1122, #1998 ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.914572079465440500E-016, 32.39999999999995600 ) ) ; +#379 = DIRECTION ( 'NONE', ( -3.469446951953614200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#380 = AXIS2_PLACEMENT_3D ( 'NONE', #1567, #872, #1792 ) ; +#381 = FACE_OUTER_BOUND ( 'NONE', #2139, .T. ) ; +#382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.156482317317871500E-016 ) ) ; +#383 = LINE ( 'NONE', #1852, #1538 ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 16.66443168424962800, 9.281034358511064400, 24.96561028349918500 ) ) ; +#385 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#386 = LINE ( 'NONE', #2407, #2153 ) ; +#387 = AXIS2_PLACEMENT_3D ( 'NONE', #1564, #1115, #2724 ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, -23.09319927467733200, 10.00000000000000200 ) ) ; +#389 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#390 = ORIENTED_EDGE ( 'NONE', *, *, #2880, .F. ) ; +#391 = CIRCLE ( 'NONE', #650, 2.500000000000000000 ) ; +#392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( 11.43297160761127400, 15.24074098956045600, 21.93217775738814600 ) ) ; +#394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#396 = EDGE_LOOP ( 'NONE', ( #1087, #2986, #619, #38 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 17.18055791241520300, -24.13539832442686600, 9.686739816770565200 ) ) ; +#399 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #2698, #1099 ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#401 = ORIENTED_EDGE ( 'NONE', *, *, #1510, .T. ) ; +#402 = EDGE_LOOP ( 'NONE', ( #1183, #2974, #1162, #61 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -13.82579111660523100, -5.000000000000000000, 32.39999999999995600 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 149.9000000000000100 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 9.572860397327202600E-017, 34.89999999999995600 ) ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #1490, .F. ) ; +#407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #1742, .T. ) ; +#409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#410 = EDGE_LOOP ( 'NONE', ( #328, #2200, #1017, #2883 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 34.89999999999995600 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -5.000000000000000000, 34.89999999999995600 ) ) ; +#413 = VECTOR ( 'NONE', #867, 1000.000000000000000 ) ; +#414 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#415 = FACE_OUTER_BOUND ( 'NONE', #2609, .T. ) ; +#416 = EDGE_CURVE ( 'NONE', #2383, #2922, #1375, .T. ) ; +#417 = EDGE_CURVE ( 'NONE', #2031, #2021, #2529, .T. ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 34.89999999999995600 ) ) ; +#419 = LINE ( 'NONE', #1936, #2186 ) ; +#420 = AXIS2_PLACEMENT_3D ( 'NONE', #2879, #1281, #2194 ) ; +#421 = TOROIDAL_SURFACE ( 'NONE', #2955, 11.55000000000000200, 2.500000000000000000 ) ; +#422 = FACE_OUTER_BOUND ( 'NONE', #1417, .T. ) ; +#423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#424 = FACE_OUTER_BOUND ( 'NONE', #2594, .T. ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 4.999999999999999100, 32.39999999999995600 ) ) ; +#426 = AXIS2_PLACEMENT_3D ( 'NONE', #2128, #742, #2360 ) ; +#427 = CIRCLE ( 'NONE', #245, 2.500000000000000400 ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080900, 12.66525648269531800, 32.39999999999995600 ) ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499999999999999600, 32.39999999999995600 ) ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000002700, -10.41165212634383300, 34.89999999999995600 ) ) ; +#431 = VERTEX_POINT ( 'NONE', #1528 ) ; +#432 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#433 = EDGE_CURVE ( 'NONE', #1601, #464, #62, .T. ) ; +#434 = EDGE_CURVE ( 'NONE', #145, #199, #679, .T. ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .F. ) ; +#436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#438 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 8.290602356070202500, 50.74558836369040900, 15.59948156386134400 ) ) ; +#440 = AXIS2_PLACEMENT_3D ( 'NONE', #2865, #1485, #108 ) ; +#441 = EDGE_LOOP ( 'NONE', ( #77, #1937, #2611, #2099 ) ) ; +#442 = DIRECTION ( 'NONE', ( -1.486905836551548300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#443 = ORIENTED_EDGE ( 'NONE', *, *, #2595, .T. ) ; +#444 = AXIS2_PLACEMENT_3D ( 'NONE', #538, #2166, #782 ) ; +#445 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .F. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 34.89999999999995600 ) ) ; +#447 = EDGE_LOOP ( 'NONE', ( #361, #1718, #1661, #1687, #1800, #623 ) ) ; +#448 = LINE ( 'NONE', #425, #163 ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 34.89999999999995600 ) ) ; +#450 = ADVANCED_FACE ( 'NONE', ( #1827 ), #2987, .F. ) ; +#451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#452 = VECTOR ( 'NONE', #2053, 1000.000000000000000 ) ; +#453 = AXIS2_PLACEMENT_3D ( 'NONE', #2608, #1227, #2827 ) ; +#454 = LINE ( 'NONE', #2776, #2761 ) ; +#455 = DIRECTION ( 'NONE', ( -0.4329004329004330100, -0.9014417425405912800, 0.0000000000000000000 ) ) ; +#456 = FACE_OUTER_BOUND ( 'NONE', #2965, .T. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 9.833755150206350500, -23.81735762803154100, 17.33227288533856500 ) ) ; +#458 = ORIENTED_EDGE ( 'NONE', *, *, #820, .F. ) ; +#459 = CIRCLE ( 'NONE', #2721, 16.55000000000000100 ) ; +#460 = CARTESIAN_POINT ( 'NONE', ( 7.164502164502162700, 14.91886083904679500, 149.9000000000000100 ) ) ; +#461 = AXIS2_PLACEMENT_3D ( 'NONE', #418, #2503, #1582 ) ; +#462 = ADVANCED_FACE ( 'NONE', ( #140 ), #1889, .T. ) ; +#463 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#464 = VERTEX_POINT ( 'NONE', #1779 ) ; +#465 = VERTEX_POINT ( 'NONE', #870 ) ; +#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#467 = EDGE_CURVE ( 'NONE', #1361, #1900, #1218, .T. ) ; +#468 = EDGE_CURVE ( 'NONE', #906, #1050, #600, .T. ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #2192, .F. ) ; +#470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ; +#473 = AXIS2_PLACEMENT_3D ( 'NONE', #971, #1877, #276 ) ; +#474 = VERTEX_POINT ( 'NONE', #2711 ) ; +#475 = ADVANCED_FACE ( 'NONE', ( #2909 ), #1678, .T. ) ; +#476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#477 = VERTEX_POINT ( 'NONE', #2497 ) ; +#478 = AXIS2_PLACEMENT_3D ( 'NONE', #2112, #2207, #817 ) ; +#479 = LINE ( 'NONE', #612, #1103 ) ; +#480 = VECTOR ( 'NONE', #2264, 1000.000000000000000 ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( -9.411947494897789900, 49.94533198651208000, 16.88948023607982300 ) ) ; +#482 = VECTOR ( 'NONE', #1241, 1000.000000000000000 ) ; +#483 = EDGE_CURVE ( 'NONE', #90, #474, #2307, .T. ) ; +#484 = EDGE_CURVE ( 'NONE', #764, #1813, #1756, .T. ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#486 = CIRCLE ( 'NONE', #1700, 2.500000000000000000 ) ; +#487 = TOROIDAL_SURFACE ( 'NONE', #295, 11.55000000000000200, 2.500000000000000000 ) ; +#488 = ADVANCED_FACE ( 'NONE', ( #2369 ), #998, .F. ) ; +#489 = CIRCLE ( 'NONE', #440, 2.500000000000000400 ) ; +#490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#491 = FACE_OUTER_BOUND ( 'NONE', #2318, .T. ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .F. ) ; +#493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .T. ) ; +#495 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#496 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#498 = ADVANCED_FACE ( 'NONE', ( #2830 ), #2767, .T. ) ; +#499 = VERTEX_POINT ( 'NONE', #2731 ) ; +#500 = EDGE_CURVE ( 'NONE', #1595, #1358, #2241, .T. ) ; +#501 = EDGE_CURVE ( 'NONE', #2723, #2773, #459, .T. ) ; +#502 = ORIENTED_EDGE ( 'NONE', *, *, #2329, .T. ) ; +#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#504 = VERTEX_POINT ( 'NONE', #1587 ) ; +#505 = VERTEX_POINT ( 'NONE', #208 ) ; +#506 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #13, 'distance_accuracy_value', 'NONE'); +#507 = CYLINDRICAL_SURFACE ( 'NONE', #2289, 14.05000000000000600 ) ; +#508 = AXIS2_PLACEMENT_3D ( 'NONE', #2961, #1580, #198 ) ; +#509 = VECTOR ( 'NONE', #221, 1000.000000000000000 ) ; +#510 = ADVANCED_FACE ( 'NONE', ( #1615 ), #902, .T. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -16.88948023607982300, 49.94533198651208000, 9.411947494897791700 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -5.000000000000000900, 152.4000000000000100 ) ) ; +#513 = EDGE_CURVE ( 'NONE', #2744, #2723, #391, .T. ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -9.572860397327198900E-017, 32.39999999999995600 ) ) ; +#515 = EDGE_CURVE ( 'NONE', #1807, #981, #1545, .T. ) ; +#516 = LINE ( 'NONE', #770, #2695 ) ; +#517 = ORIENTED_EDGE ( 'NONE', *, *, #1313, .F. ) ; +#518 = VECTOR ( 'NONE', #631, 1000.000000000000000 ) ; +#519 = AXIS2_PLACEMENT_3D ( 'NONE', #1243, #2843, #1466 ) ; +#520 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.156482317317871500E-016 ) ) ; +#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #776, .F. ) ; +#523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#524 = ADVANCED_FACE ( 'NONE', ( #2157 ), #1378, .F. ) ; +#525 = ORIENTED_EDGE ( 'NONE', *, *, #1850, .T. ) ; +#526 = AXIS2_PLACEMENT_3D ( 'NONE', #2733, #1362, #2967 ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#528 = ORIENTED_EDGE ( 'NONE', *, *, #2399, .F. ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( 15.30091669073108600, 50.80000000000002600, 8.050705648101493100 ) ) ; +#530 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.156482317317871500E-016 ) ) ; +#531 = VERTEX_POINT ( 'NONE', #2067 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( -12.29113253801920700, 14.55917732507658400, 22.91286038244454600 ) ) ; +#533 = ORIENTED_EDGE ( 'NONE', *, *, #214, .F. ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531400, 6.082251082251080000, 34.89999999999995600 ) ) ; +#535 = PLANE ( 'NONE', #1537 ) ; +#536 = ORIENTED_EDGE ( 'NONE', *, *, #1716, .T. ) ; +#537 = AXIS2_PLACEMENT_3D ( 'NONE', #1359, #2964, #1585 ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 34.89999999999995600 ) ) ; +#539 = EDGE_LOOP ( 'NONE', ( #947, #2129, #1802, #2024 ) ) ; +#540 = ADVANCED_FACE ( 'NONE', ( #1465 ), #931, .F. ) ; +#541 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.552713678800500900E-015, 0.0000000000000000000 ) ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, -17.49999999999999600 ) ) ; +#543 = FACE_OUTER_BOUND ( 'NONE', #2147, .T. ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( -16.88823408840651300, 8.827402837097759300, 24.97804174596850000 ) ) ; +#545 = CIRCLE ( 'NONE', #1260, 2.500000000000002200 ) ; +#546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#548 = CIRCLE ( 'NONE', #444, 2.500000000000000000 ) ; +#549 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#550 = CIRCLE ( 'NONE', #2841, 2.500000000000000000 ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, 9.999999999999996400 ) ) ; +#552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( -18.68046166164635500, -3.856645627774324000, 24.90802454745167100 ) ) ; +#554 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .F. ) ; +#555 = CYLINDRICAL_SURFACE ( 'NONE', #129, 2.500000000000000400 ) ; +#556 = EDGE_CURVE ( 'NONE', #115, #2101, #2699, .T. ) ; +#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#558 = EDGE_CURVE ( 'NONE', #150, #2337, #73, .T. ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -2.500000000000000000, 149.9000000000000100 ) ) ; +#560 = FACE_OUTER_BOUND ( 'NONE', #2804, .T. ) ; +#561 = AXIS2_PLACEMENT_3D ( 'NONE', #1293, #1514, #139 ) ; +#562 = ORIENTED_EDGE ( 'NONE', *, *, #2443, .F. ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, -19.04999999999999700, -17.50000000000000400 ) ) ; +#564 = CARTESIAN_POINT ( 'NONE', ( -13.53225466511584300, -13.41005489924926800, 23.86730825479461500 ) ) ; +#565 = ORIENTED_EDGE ( 'NONE', *, *, #1373, .T. ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 2.499999999999999600, 34.89999999999995600 ) ) ; +#567 = AXIS2_PLACEMENT_3D ( 'NONE', #1196, #2120, #733 ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( -17.47792798127923300, -23.28044930966249400, 9.977845042407315300 ) ) ; +#569 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ; +#570 = ORIENTED_EDGE ( 'NONE', *, *, #2949, .F. ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 10.37487249669072800, -15.97842296350162500, 19.88845934739568500 ) ) ; +#572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( -10.09537445886375200, -16.15515212544351800, 18.71628488833230000 ) ) ; +#574 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ; +#575 = EDGE_CURVE ( 'NONE', #943, #2418, #2624, .T. ) ; +#576 = EDGE_CURVE ( 'NONE', #2156, #259, #2087, .T. ) ; +#577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#578 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .T. ) ; +#579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( -15.74006723365444300, -25.29267025258846500, 8.408091574663146200 ) ) ; +#581 = SHAPE_DEFINITION_REPRESENTATION ( #212, #2983 ) ; +#582 = AXIS2_PLACEMENT_3D ( 'NONE', #2202, #812, #2428 ) ; +#583 = VERTEX_POINT ( 'NONE', #2084 ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -25.39999999999999900, 0.0000000000000000000 ) ) ; +#585 = FACE_OUTER_BOUND ( 'NONE', #1817, .T. ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 15.06811981137609500, -11.66512987164431300, 24.60193819214064000 ) ) ; +#587 = DIRECTION ( 'NONE', ( -1.982541115402064400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#588 = LINE ( 'NONE', #210, #2898 ) ; +#589 = AXIS2_PLACEMENT_3D ( 'NONE', #2619, #768, #2840 ) ; +#590 = DIRECTION ( 'NONE', ( -0.9014417425405916200, 0.4329004329004325100, 0.0000000000000000000 ) ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 48.29999999999999700, -17.50000000000000400 ) ) ; +#592 = PLANE ( 'NONE', #889 ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -2.500000000000000400, 32.39999999999995600 ) ) ; +#594 = CIRCLE ( 'NONE', #1389, 2.500000000000002200 ) ; +#595 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.982541115402065100E-016 ) ) ; +#596 = CYLINDRICAL_SURFACE ( 'NONE', #380, 2.500000000000000400 ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( -9.686739816770566900, -24.13539832442687000, 17.18055791241519300 ) ) ; +#598 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .F. ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 19.05020093377896700, -0.9633020767344955300, 24.83804313882523500 ) ) ; +#600 = CIRCLE ( 'NONE', #2403, 2.500000000000000000 ) ; +#601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#602 = AXIS2_PLACEMENT_3D ( 'NONE', #779, #2391, #1009 ) ; +#603 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .T. ) ; +#604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#605 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26, #249, #1847, #1632, #257, #1857, #481, #2102, #714, #2336, #952, #2568, #1187, #2792 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.016266328225900700E-005, 0.001131872670829424700, 0.002273908004941112500, 0.002844925671996958400, 0.003415943339052805200, 0.003986961006108651600, 0.004557978673164498000 ), + .UNSPECIFIED. ) ; +#606 = ORIENTED_EDGE ( 'NONE', *, *, #1697, .T. ) ; +#607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 15.34906961321675200, 11.29334207597918600, 24.69056077369579700 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 48.29999999999999700, -17.50000000000000400 ) ) ; +#610 = ORIENTED_EDGE ( 'NONE', *, *, #65, .T. ) ; +#611 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, 152.4010000000000100 ) ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000400, 34.89999999999995600 ) ) ; +#615 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #1815, #437 ) ; +#616 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#617 = ORIENTED_EDGE ( 'NONE', *, *, #2563, .F. ) ; +#618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#619 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 10.73193893256848200, 15.74083889945785200, 20.76616088619260500 ) ) ; +#621 = PLANE ( 'NONE', #2754 ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -47.20000000000003100, 17.50000000000000400 ) ) ; +#623 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ; +#624 = EDGE_CURVE ( 'NONE', #2576, #364, #865, .T. ) ; +#625 = EDGE_CURVE ( 'NONE', #465, #2576, #2014, .T. ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 16.88947346982401500, -24.54533984291375500, 9.411941210245064600 ) ) ; +#627 = VECTOR ( 'NONE', #137, 1000.000000000000000 ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 34.89999999999995600 ) ) ; +#629 = AXIS2_PLACEMENT_3D ( 'NONE', #1207, #53, #2588 ) ; +#630 = CIRCLE ( 'NONE', #326, 14.05000000000000600 ) ; +#631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#632 = ORIENTED_EDGE ( 'NONE', *, *, #1138, .F. ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.914572079465441000E-016, 34.89999999999995600 ) ) ; +#634 = CIRCLE ( 'NONE', #2809, 2.500000000000000000 ) ; +#635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#637 = FACE_OUTER_BOUND ( 'NONE', #2378, .T. ) ; +#638 = AXIS2_PLACEMENT_3D ( 'NONE', #2216, #828, #2447 ) ; +#639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .F. ) ; +#641 = VECTOR ( 'NONE', #2833, 1000.000000000000000 ) ; +#642 = DIRECTION ( 'NONE', ( -0.4329004329004327900, 0.9014417425405915100, 0.0000000000000000000 ) ) ; +#643 = DIRECTION ( 'NONE', ( -6.938893903907222500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#644 = EDGE_CURVE ( 'NONE', #1809, #747, #605, .T. ) ; +#645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.982541115402064400E-016 ) ) ; +#646 = EDGE_CURVE ( 'NONE', #2281, #1595, #1402, .T. ) ; +#647 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ; +#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#649 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.156482317317871500E-016 ) ) ; +#650 = AXIS2_PLACEMENT_3D ( 'NONE', #911, #2527, #1144 ) ; +#651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#652 = ORIENTED_EDGE ( 'NONE', *, *, #1865, .T. ) ; +#653 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.156482317317871500E-016 ) ) ; +#654 = VERTEX_POINT ( 'NONE', #1169 ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 152.4000000000000100 ) ) ; +#656 = ORIENTED_EDGE ( 'NONE', *, *, #1451, .F. ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 50.79999999999999700, 14.99999999999999600 ) ) ; +#658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#659 = ORIENTED_EDGE ( 'NONE', *, *, #905, .F. ) ; +#660 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#661 = ORIENTED_EDGE ( 'NONE', *, *, #1696, .F. ) ; +#662 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, 9.999999999999996400 ) ) ; +#664 = CIRCLE ( 'NONE', #1240, 2.500000000000002200 ) ; +#665 = EDGE_LOOP ( 'NONE', ( #953, #977, #640, #1479, #2664, #2423, #1996, #4 ) ) ; +#666 = VECTOR ( 'NONE', #1082, 1000.000000000000000 ) ; +#667 = EDGE_CURVE ( 'NONE', #2236, #2922, #180, .T. ) ; +#668 = EDGE_CURVE ( 'NONE', #1601, #1388, #2561, .T. ) ; +#669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#670 = FACE_OUTER_BOUND ( 'NONE', #1221, .T. ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -29.05000000000000400, -7.434529182757741500E-016 ) ) ; +#672 = TOROIDAL_SURFACE ( 'NONE', #1957, 5.000000000000000000, 2.500000000000000000 ) ; +#673 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#674 = VECTOR ( 'NONE', #1270, 1000.000000000000000 ) ; +#675 = CIRCLE ( 'NONE', #68, 5.000000000000000000 ) ; +#676 = ORIENTED_EDGE ( 'NONE', *, *, #483, .F. ) ; +#677 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #874, #2491 ) ; +#678 = ADVANCED_FACE ( 'NONE', ( #1338 ), #1854, .T. ) ; +#679 = LINE ( 'NONE', #2003, #2450 ) ; +#680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#682 = ORIENTED_EDGE ( 'NONE', *, *, #2531, .F. ) ; +#683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#684 = EDGE_CURVE ( 'NONE', #505, #764, #2490, .T. ) ; +#685 = EDGE_CURVE ( 'NONE', #1812, #2259, #96, .T. ) ; +#686 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 1.914572079465441000E-016, -5.000000000000000900, 34.89999999999995600 ) ) ; +#688 = EDGE_LOOP ( 'NONE', ( #2291, #2839, #2368, #11 ) ) ; +#689 = AXIS2_PLACEMENT_3D ( 'NONE', #883, #1579, #2044 ) ; +#690 = ORIENTED_EDGE ( 'NONE', *, *, #2693, .T. ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 9.599526219158558900, -24.28259689384527700, 17.08942073814193600 ) ) ; +#692 = ADVANCED_FACE ( 'NONE', ( #30 ), #995, .F. ) ; +#693 = DIRECTION ( 'NONE', ( 0.4329004329004326700, 0.9014417425405914000, 0.0000000000000000000 ) ) ; +#694 = EDGE_LOOP ( 'NONE', ( #2468, #1862, #177 ) ) ; +#695 = AXIS2_PLACEMENT_3D ( 'NONE', #2530, #1145, #2748 ) ; +#696 = VERTEX_POINT ( 'NONE', #309 ) ; +#697 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #932 ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #1190, .F. ) ; +#699 = FACE_OUTER_BOUND ( 'NONE', #2211, .T. ) ; +#700 = CYLINDRICAL_SURFACE ( 'NONE', #20, 14.05000000000000600 ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 48.29999999999999700, -17.50000000000000700 ) ) ; +#702 = AXIS2_PLACEMENT_3D ( 'NONE', #877, #2943, #2496 ) ; +#703 = VECTOR ( 'NONE', #2146, 1000.000000000000000 ) ; +#704 = ADVANCED_FACE ( 'NONE', ( #711 ), #555, .F. ) ; +#705 = PRODUCT_CONTEXT ( 'NONE', #932, 'mechanical' ) ; +#706 = VERTEX_POINT ( 'NONE', #1244 ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 8.988506966194043100, 50.37967146279928700, 16.42337344322063300 ) ) ; +#708 = CIRCLE ( 'NONE', #14, 19.05000000000000100 ) ; +#709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#710 = VERTEX_POINT ( 'NONE', #2844 ) ; +#711 = FACE_OUTER_BOUND ( 'NONE', #2979, .T. ) ; +#712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#713 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .T. ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -9.686743449295420300, 49.53539151354558400, 17.18056168867306300 ) ) ; +#715 = ADVANCED_FACE ( 'NONE', ( #2405 ), #2338, .F. ) ; +#716 = ORIENTED_EDGE ( 'NONE', *, *, #1974, .T. ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, 16.21426840779441700, 17.49999999999999600 ) ) ; +#718 = EDGE_CURVE ( 'NONE', #1807, #1565, #1184, .T. ) ; +#719 = EDGE_CURVE ( 'NONE', #2673, #150, #1793, .T. ) ; +#720 = ORIENTED_EDGE ( 'NONE', *, *, #1314, .F. ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, 9.999999999999994700 ) ) ; +#722 = ORIENTED_EDGE ( 'NONE', *, *, #1598, .T. ) ; +#723 = STYLED_ITEM ( 'NONE', ( #2437 ), #1456 ) ; +#724 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#725 = EDGE_LOOP ( 'NONE', ( #659, #610, #960, #157 ) ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 4.999999999999999100, 32.39999999999995600 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -10.41165212634383300, 34.89999999999995600 ) ) ; +#728 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .F. ) ; +#729 = AXIS2_PLACEMENT_3D ( 'NONE', #2573, #969, #1434 ) ; +#730 = VERTEX_POINT ( 'NONE', #542 ) ; +#731 = ADVANCED_FACE ( 'NONE', ( #1710 ), #1259, .F. ) ; +#732 = VECTOR ( 'NONE', #1441, 1000.000000000000000 ) ; +#733 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#734 = FACE_OUTER_BOUND ( 'NONE', #694, .T. ) ; +#735 = EDGE_CURVE ( 'NONE', #464, #2710, #2868, .T. ) ; +#736 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#737 = EDGE_CURVE ( 'NONE', #2204, #1353, #489, .T. ) ; +#738 = COLOUR_RGB ( '',1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -29.05000000000000400, 2.478176394252581600E-016 ) ) ; +#740 = FACE_OUTER_BOUND ( 'NONE', #1853, .T. ) ; +#741 = VECTOR ( 'NONE', #1760, 1000.000000000000000 ) ; +#742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#743 = CIRCLE ( 'NONE', #1785, 2.500000000000002200 ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531400, 6.082251082251080900, 149.9000000000000100 ) ) ; +#745 = ADVANCED_FACE ( 'NONE', ( #2274 ), #2193, .T. ) ; +#746 = AXIS2_PLACEMENT_3D ( 'NONE', #2177, #790, #2406 ) ; +#747 = VERTEX_POINT ( 'NONE', #343 ) ; +#748 = DIRECTION ( 'NONE', ( 3.829144158930881000E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#749 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( -17.18056168867306600, 49.53539151354559100, 9.686743449295423900 ) ) ; +#751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#752 = EDGE_LOOP ( 'NONE', ( #1439, #2941, #367, #941 ) ) ; +#753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#755 = ORIENTED_EDGE ( 'NONE', *, *, #1910, .F. ) ; +#756 = AXIS2_PLACEMENT_3D ( 'NONE', #1000, #754, #1238 ) ; +#757 = VERTEX_POINT ( 'NONE', #2188 ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 10.41165212634383700, 152.4000000000000100 ) ) ; +#759 = ADVANCED_FACE ( 'NONE', ( #2797 ), #1939, .T. ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 32.39999999999995600 ) ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, -19.04999999999999700, 152.4010000000000100 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.41165212634383300, 149.9000000000000100 ) ) ; +#763 = EDGE_LOOP ( 'NONE', ( #2286, #2989, #1203, #1232 ) ) ; +#764 = VERTEX_POINT ( 'NONE', #563 ) ; +#765 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#766 = LINE ( 'NONE', #1279, #1328 ) ; +#767 = AXIS2_PLACEMENT_3D ( 'NONE', #446, #2064, #680 ) ; +#768 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#769 = CIRCLE ( 'NONE', #2390, 2.500000000000000000 ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 2.500000000000000000, 32.39999999999995600 ) ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( -1.914572079465441000E-016, -5.000000000000000900, 34.89999999999995600 ) ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( -13.22322966003173900, 13.71961609015025400, 23.67365472195888300 ) ) ; +#773 = FACE_OUTER_BOUND ( 'NONE', #2639, .T. ) ; +#774 = EDGE_CURVE ( 'NONE', #2012, #1896, #1642, .T. ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 34.89999999999995600 ) ) ; +#776 = EDGE_CURVE ( 'NONE', #364, #2314, #1586, .T. ) ; +#777 = ADVANCED_FACE ( 'NONE', ( #424 ), #1032, .T. ) ; +#778 = TOROIDAL_SURFACE ( 'NONE', #2700, 5.000000000000000000, 2.500000000000000000 ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 149.9000000000000100 ) ) ; +#780 = EDGE_LOOP ( 'NONE', ( #2811, #401, #2907 ) ) ; +#781 = VECTOR ( 'NONE', #299, 1000.000000000000000 ) ; +#782 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#783 = AXIS2_PLACEMENT_3D ( 'NONE', #2141, #753, #2370 ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 15.59948156386136200, 50.74558836369040200, 8.290602356070182900 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 34.89999999999995600 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( -17.88429168692788100, 6.632580148814794200, 24.99580709877464500 ) ) ; +#787 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .T. ) ; +#788 = AXIS2_PLACEMENT_3D ( 'NONE', #1524, #146, #1751 ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ; +#790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 34.89999999999995600 ) ) ; +#792 = EDGE_LOOP ( 'NONE', ( #254 ) ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( -18.02872121581262000, -6.172524238643751100, 24.98274800264730900 ) ) ; +#794 = EDGE_CURVE ( 'NONE', #2387, #286, #348, .T. ) ; +#795 = EDGE_CURVE ( 'NONE', #2922, #1388, #2735, .T. ) ; +#796 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -10.41165212634383200, 34.89999999999995600 ) ) ; +#798 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#799 = ORIENTED_EDGE ( 'NONE', *, *, #1742, .F. ) ; +#800 = AXIS2_PLACEMENT_3D ( 'NONE', #2977, #1594, #219 ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( -7.817541634481457900, 50.79999999999999700, 14.99999999999999800 ) ) ; +#802 = ORIENTED_EDGE ( 'NONE', *, *, #2344, .T. ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, -16.21426840779441700, 17.99211085293906000 ) ) ; +#804 = CIRCLE ( 'NONE', #615, 2.500000000000002200 ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -13.05877591752800600, -13.87139448939485000, 23.54684122470512300 ) ) ; +#806 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .F. ) ; +#807 = CIRCLE ( 'NONE', #426, 9.999999999999998200 ) ; +#808 = FACE_OUTER_BOUND ( 'NONE', #2027, .T. ) ; +#809 = DIRECTION ( 'NONE', ( -0.9014417425405914000, -0.4329004329004327300, 0.0000000000000000000 ) ) ; +#810 = VECTOR ( 'NONE', #2661, 1000.000000000000000 ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 10.94464625373622500, -15.59521838940312200, 21.17243864536944300 ) ) ; +#812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( -10.01223254151195600, -16.20674203626482800, 17.99257010816825500 ) ) ; +#814 = FACE_OUTER_BOUND ( 'NONE', #1160, .T. ) ; +#815 = VECTOR ( 'NONE', #587, 1000.000000000000000 ) ; +#816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#817 = DIRECTION ( 'NONE', ( 1.982541115402066300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#818 = EDGE_CURVE ( 'NONE', #2888, #1474, #2118, .T. ) ; +#819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#820 = EDGE_CURVE ( 'NONE', #2806, #90, #278, .T. ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( -15.30082764289218400, -25.38632191270632500, 8.052697117567959100 ) ) ; +#822 = LINE ( 'NONE', #2223, #1971 ) ; +#823 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#824 = ORIENTED_EDGE ( 'NONE', *, *, #2280, .T. ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 15.90219343582516700, -10.50010769190826900, 24.83328341088722300 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 5.000000000000000000, 34.89999999999995600 ) ) ; +#827 = VERTEX_POINT ( 'NONE', #133 ) ; +#828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( -9.572860397327198900E-017, 2.499999999999999600, 149.9000000000000100 ) ) ; +#830 = AXIS2_PLACEMENT_3D ( 'NONE', #2717, #2947, #190 ) ; +#831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#832 = EDGE_LOOP ( 'NONE', ( #2095, #311, #1591, #838 ) ) ; +#833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2682, #388, #1547, #171, #1775, #398, #2011, #626, #2254, #868, #2482, #1097, #2709, #1336, #2939, #1560 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005693863809462890100, 0.001138772761892578000, 0.001708159142838867100, 0.002277545523785156100, 0.003416318285677736900, 0.003985704666624030800, 0.004555091047570323400 ), + .UNSPECIFIED. ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 50.79999999999999700, 7.817541634481456100 ) ) ; +#835 = VERTEX_POINT ( 'NONE', #2439 ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( -9.411941210245062800, -24.54533984291376200, 16.88947346982401500 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 19.03130733040009300, 0.9741598970961699000, 24.84210785590959200 ) ) ; +#838 = ORIENTED_EDGE ( 'NONE', *, *, #576, .T. ) ; +#839 = EDGE_CURVE ( 'NONE', #2101, #2966, #1500, .T. ) ; +#840 = EDGE_CURVE ( 'NONE', #1312, #2214, #2055, .T. ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, -5.000000000000000900, 149.9000000000000100 ) ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( -14.91886083904678800, -7.164502164502167100, 149.9000000000000100 ) ) ; +#843 = EDGE_LOOP ( 'NONE', ( #1732, #1684, #598 ) ) ; +#844 = FILL_AREA_STYLE_COLOUR ( '', #738 ) ; +#845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#846 = AXIS2_PLACEMENT_3D ( 'NONE', #1916, #80, #1458 ) ; +#847 = VERTEX_POINT ( 'NONE', #1521 ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, -9.023654377385075000E-016, 149.9000000000000100 ) ) ; +#849 = CYLINDRICAL_SURFACE ( 'NONE', #830, 2.500000000000000400 ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 14.46171801534495100, 12.40900484138168900, 24.36449810196412700 ) ) ; +#851 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#852 = DIRECTION ( 'NONE', ( -3.829144158930881000E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#853 = FACE_OUTER_BOUND ( 'NONE', #2571, .T. ) ; +#854 = AXIS2_PLACEMENT_3D ( 'NONE', #2068, #683, #2303 ) ; +#855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#858 = TOROIDAL_SURFACE ( 'NONE', #1589, 5.000000000000000000, 2.500000000000000000 ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 32.39999999999995600 ) ) ; +#860 = CIRCLE ( 'NONE', #1768, 16.55000000000000100 ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976806700E-015, 48.29999999999999000, 14.99999999999999800 ) ) ; +#862 = ORIENTED_EDGE ( 'NONE', *, *, #818, .F. ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 10.38362989667161600, 15.97151871865360600, 19.88006426122625600 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 7.817541634481461400, 50.79999999999999700, 14.99999999999999600 ) ) ; +#865 = CIRCLE ( 'NONE', #1721, 2.500000000000000400 ) ; +#866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#867 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 16.42336188904445700, -24.97967966108459900, 8.988496734622149400 ) ) ; +#869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531800, 6.082251082251080900, 149.9000000000000100 ) ) ; +#871 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .F. ) ; +#872 = DIRECTION ( 'NONE', ( 1.982541115402064400E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#873 = ORIENTED_EDGE ( 'NONE', *, *, #2633, .T. ) ; +#874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#875 = ORIENTED_EDGE ( 'NONE', *, *, #2549, .T. ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.41165212634383300, 152.4000000000000100 ) ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 34.89999999999995600 ) ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #2800, .T. ) ; +#879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#880 = PLANE ( 'NONE', #387 ) ; +#881 = ORIENTED_EDGE ( 'NONE', *, *, #2191, .T. ) ; +#882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383300, -5.000000000000000900, 34.89999999999995600 ) ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .F. ) ; +#885 = EDGE_CURVE ( 'NONE', #2214, #2837, #1433, .T. ) ; +#886 = EDGE_CURVE ( 'NONE', #267, #336, #2589, .T. ) ; +#887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#888 = CIRCLE ( 'NONE', #159, 2.500000000000000000 ) ; +#889 = AXIS2_PLACEMENT_3D ( 'NONE', #365, #2891, #2218 ) ; +#890 = CIRCLE ( 'NONE', #2339, 5.000000000000000000 ) ; +#891 = DIRECTION ( 'NONE', ( 1.156482317317871000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#892 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#893 = CIRCLE ( 'NONE', #1216, 2.500000000000000000 ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383300, -5.000000000000002700, 34.89999999999995600 ) ) ; +#895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#896 = VECTOR ( 'NONE', #1752, 1000.000000000000000 ) ; +#897 = AXIS2_PLACEMENT_3D ( 'NONE', #512, #2138, #751 ) ; +#898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -5.000000000000000900, 149.9000000000000100 ) ) ; +#900 = VECTOR ( 'NONE', #76, 1000.000000000000000 ) ; +#901 = VECTOR ( 'NONE', #1288, 1000.000000000000000 ) ; +#902 = PLANE ( 'NONE', #800 ) ; +#903 = CYLINDRICAL_SURFACE ( 'NONE', #1011, 2.500000000000000400 ) ; +#904 = EDGE_CURVE ( 'NONE', #906, #2004, #218, .T. ) ; +#905 = EDGE_CURVE ( 'NONE', #2513, #1868, #2656, .T. ) ; +#906 = VERTEX_POINT ( 'NONE', #2227 ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, -17.50000000000000400 ) ) ; +#909 = AXIS2_PLACEMENT_3D ( 'NONE', #1264, #1256, #552 ) ; +#910 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( -7.164502164502168000, -14.91886083904679200, 149.9000000000000100 ) ) ; +#912 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .T. ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -10.41165212634383300, 149.9000000000000100 ) ) ; +#914 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #1711, #340 ) ; +#915 = EDGE_LOOP ( 'NONE', ( #2388, #1273, #1226, #1956, #232, #189 ) ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #2493, .T. ) ; +#917 = VERTEX_POINT ( 'NONE', #1544 ) ; +#918 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -2.500000000000000000, 32.39999999999995600 ) ) ; +#919 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#920 = VERTEX_POINT ( 'NONE', #864 ) ; +#921 = FACE_OUTER_BOUND ( 'NONE', #410, .T. ) ; +#922 = ADVANCED_FACE ( 'NONE', ( #1374 ), #621, .T. ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, 4.999999999999999100, 149.9000000000000100 ) ) ; +#924 = FACE_OUTER_BOUND ( 'NONE', #2803, .T. ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( 9.310616879071895700, -24.66292844031368100, 16.77970220944726500 ) ) ; +#926 = CIRCLE ( 'NONE', #1278, 2.500000000000002200 ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #1953, .F. ) ; +#928 = VECTOR ( 'NONE', #1946, 1000.000000000000000 ) ; +#929 = ORIENTED_EDGE ( 'NONE', *, *, #1660, .T. ) ; +#930 = AXIS2_PLACEMENT_3D ( 'NONE', #2534, #1148, #2753 ) ; +#931 = SPHERICAL_SURFACE ( 'NONE', #1425, 2.500000000000000000 ) ; +#932 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#933 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#934 = ADVANCED_FACE ( 'NONE', ( #2526 ), #1886, .T. ) ; +#935 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383500, 32.39999999999995600 ) ) ; +#936 = EDGE_CURVE ( 'NONE', #1239, #2418, #1967, .T. ) ; +#937 = EDGE_CURVE ( 'NONE', #66, #2457, #136, .T. ) ; +#938 = ORIENTED_EDGE ( 'NONE', *, *, #1450, .F. ) ; +#939 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#940 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #2322 ) ; +#941 = ORIENTED_EDGE ( 'NONE', *, *, #774, .T. ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( 9.411947494897795300, 49.94533198651209500, 16.88948023607982000 ) ) ; +#943 = VERTEX_POINT ( 'NONE', #188 ) ; +#944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#945 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .T. ) ; +#946 = AXIS2_PLACEMENT_3D ( 'NONE', #842, #2460, #1074 ) ; +#947 = ORIENTED_EDGE ( 'NONE', *, *, #2422, .T. ) ; +#948 = ADVANCED_FACE ( 'NONE', ( #2445 ), #596, .T. ) ; +#949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #1717, .F. ) ; +#951 = TOROIDAL_SURFACE ( 'NONE', #2540, 5.000000000000000000, 2.500000000000000000 ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -9.894541491494063500, 49.04433584794347900, 17.39391571716475900 ) ) ; +#953 = ORIENTED_EDGE ( 'NONE', *, *, #2899, .F. ) ; +#954 = EDGE_CURVE ( 'NONE', #90, #2778, #1825, .T. ) ; +#955 = EDGE_CURVE ( 'NONE', #2882, #2888, #675, .T. ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#957 = TOROIDAL_SURFACE ( 'NONE', #2502, 5.000000000000000000, 2.500000000000000000 ) ; +#958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#959 = TOROIDAL_SURFACE ( 'NONE', #1670, 9.999999999999998200, 2.500000000000000000 ) ; +#960 = ORIENTED_EDGE ( 'NONE', *, *, #2114, .F. ) ; +#961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#962 = LINE ( 'NONE', #566, #2115 ) ; +#963 = LINE ( 'NONE', #1911, #900 ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( -7.164502164502165400, 14.91886083904679200, 149.9000000000000100 ) ) ; +#965 = ADVANCED_FACE ( 'NONE', ( #1215 ), #2984, .F. ) ; +#966 = VECTOR ( 'NONE', #119, 1000.000000000000000 ) ; +#967 = SPHERICAL_SURFACE ( 'NONE', #702, 2.500000000000000000 ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -19.04999999999999700, -7.434529182757741500E-016 ) ) ; +#969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#970 = EDGE_LOOP ( 'NONE', ( #676, #1912, #720, #222 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, -2.407412430484044800E-032, 149.9000000000000100 ) ) ; +#972 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .F. ) ; +#973 = EDGE_CURVE ( 'NONE', #710, #1312, #1154, .T. ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #2631, .F. ) ; +#975 = ADVANCED_FACE ( 'NONE', ( #2364 ), #2905, .F. ) ; +#976 = VERTEX_POINT ( 'NONE', #1903 ) ; +#977 = ORIENTED_EDGE ( 'NONE', *, *, #1762, .F. ) ; +#978 = EDGE_LOOP ( 'NONE', ( #1191 ) ) ; +#979 = AXIS2_PLACEMENT_3D ( 'NONE', #1106, #2030, #1568 ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383200, 149.9000000000000100 ) ) ; +#981 = VERTEX_POINT ( 'NONE', #2149 ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( -17.39391571716474900, 49.04433584794347200, 9.894541491494063500 ) ) ; +#983 = DIRECTION ( 'NONE', ( -0.9014417425405911700, 0.4329004329004333400, 0.0000000000000000000 ) ) ; +#984 = LINE ( 'NONE', #405, #1530 ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 2.499999999999999600, 32.39999999999995600 ) ) ; +#986 = VECTOR ( 'NONE', #919, 1000.000000000000000 ) ; +#987 = EDGE_CURVE ( 'NONE', #757, #1905, #1750, .T. ) ; +#988 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#989 = EDGE_CURVE ( 'NONE', #256, #747, #1298, .T. ) ; +#990 = ADVANCED_FACE ( 'NONE', ( #456 ), #2237, .F. ) ; +#991 = CYLINDRICAL_SURFACE ( 'NONE', #2285, 7.500000000000000000 ) ; +#992 = AXIS2_PLACEMENT_3D ( 'NONE', #1447, #1440, #1674 ) ; +#993 = CIRCLE ( 'NONE', #1454, 2.500000000000002200 ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, 48.29999999999999000, 17.49999999999999600 ) ) ; +#995 = PLANE ( 'NONE', #2805 ) ; +#996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#997 = ORIENTED_EDGE ( 'NONE', *, *, #936, .T. ) ; +#998 = CYLINDRICAL_SURFACE ( 'NONE', #192, 2.500000000000000000 ) ; +#999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 149.9000000000000100 ) ) ; +#1001 = ADVANCED_FACE ( 'NONE', ( #1673 ), #1072, .T. ) ; +#1002 = ORIENTED_EDGE ( 'NONE', *, *, #1762, .T. ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 50.79999999999999700, 7.817541634481456100 ) ) ; +#1004 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881000E-017, 0.0000000000000000000 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( -14.00811872035465700, 12.91229006413063000, 24.13995099748068500 ) ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ; +#1007 = EDGE_LOOP ( 'NONE', ( #2133, #938, #2816, #1689 ) ) ; +#1008 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1010 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ; +#1011 = AXIS2_PLACEMENT_3D ( 'NONE', #2953, #1112, #1346 ) ; +#1012 = ORIENTED_EDGE ( 'NONE', *, *, #2422, .F. ) ; +#1013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( 16.42337344322063700, 50.37967146279928700, 8.988506966194027100 ) ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( -18.44765712429654100, 4.777327280019670200, 24.94071612590796100 ) ) ; +#1016 = ORIENTED_EDGE ( 'NONE', *, *, #2080, .F. ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ; +#1018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -2.500000000000000400, 152.4000000000000100 ) ) ; +#1020 = FACE_OUTER_BOUND ( 'NONE', #2041, .T. ) ; +#1021 = SPHERICAL_SURFACE ( 'NONE', #2184, 2.500000000000000000 ) ; +#1022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1023 = DIRECTION ( 'NONE', ( 0.4329004329004327900, -0.9014417425405915100, 0.0000000000000000000 ) ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( -17.50493054752211500, -7.531025651058373100, 25.00217639895233300 ) ) ; +#1025 = VECTOR ( 'NONE', #97, 1000.000000000000000 ) ; +#1026 = EDGE_CURVE ( 'NONE', #2127, #1896, #2826, .T. ) ; +#1027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.938893903907222500E-016, 1.000000000000000000 ) ) ; +#1028 = EDGE_CURVE ( 'NONE', #2613, #1353, #1612, .T. ) ; +#1029 = CIRCLE ( 'NONE', #1855, 2.500000000000002200 ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 50.79999999999999700, 10.00000000000000500 ) ) ; +#1031 = VECTOR ( 'NONE', #200, 1000.000000000000000 ) ; +#1032 = TOROIDAL_SURFACE ( 'NONE', #1377, 9.999999999999998200, 2.500000000000000000 ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, 17.49999999999999600 ) ) ; +#1034 = AXIS2_PLACEMENT_3D ( 'NONE', #1075, #2684, #1316 ) ; +#1035 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1036 = TOROIDAL_SURFACE ( 'NONE', #399, 16.55000000000000400, 2.500000000000000000 ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( -12.28879836402696000, -14.56114382308495800, 22.91062023879662500 ) ) ; +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ; +#1039 = AXIS2_PLACEMENT_3D ( 'NONE', #2605, #1224, #2823 ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -22.89999999999999900, 10.00000000000000500 ) ) ; +#1041 = ORIENTED_EDGE ( 'NONE', *, *, #2297, .F. ) ; +#1042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 11.71188773465426900, -15.02908078163909200, 22.28843546057311900 ) ) ; +#1044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, -16.21426840779441400, 17.49999999999999600 ) ) ; +#1047 = EDGE_CURVE ( 'NONE', #354, #1987, #1672, .T. ) ; +#1048 = EDGE_CURVE ( 'NONE', #2888, #1217, #993, .T. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 10.41165212634383300, 32.39999999999995600 ) ) ; +#1050 = VERTEX_POINT ( 'NONE', #2167 ) ; +#1051 = PLANE ( 'NONE', #561 ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, -25.39999999999999900, 7.817541634481465000 ) ) ; +#1053 = ORIENTED_EDGE ( 'NONE', *, *, #2510, .F. ) ; +#1054 = AXIS2_PLACEMENT_3D ( 'NONE', #1947, #2417, #1035 ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( -9.572860397327206300E-017, -2.500000000000000400, 149.9000000000000100 ) ) ; +#1056 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 16.65862348007410500, -9.253605296393519800, 24.95683267884353600 ) ) ; +#1058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1059 = ORIENTED_EDGE ( 'NONE', *, *, #2399, .T. ) ; +#1060 = AXIS2_PLACEMENT_3D ( 'NONE', #2646, #1274, #2872 ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251083600, -12.66525648269531100, 149.9000000000000100 ) ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499999999999999600, 149.9000000000000100 ) ) ; +#1063 = FACE_OUTER_BOUND ( 'NONE', #1167, .T. ) ; +#1064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1065 = LINE ( 'NONE', #1350, #452 ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 10.41165212634383700, 149.9000000000000100 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( -8.988496734622151200, -24.97967966108460300, 16.42336188904445700 ) ) ; +#1068 = CIRCLE ( 'NONE', #2425, 4.999999999999999100 ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 18.90100887455161400, 2.426330433337307900, 24.86836165582237600 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -5.000000000000000000, 34.89999999999995600 ) ) ; +#1071 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1072 = TOROIDAL_SURFACE ( 'NONE', #846, 5.000000000000000000, 2.500000000000000000 ) ; +#1073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1074 = DIRECTION ( 'NONE', ( -0.9014417425405912800, -0.4329004329004329500, 0.0000000000000000000 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -10.41165212634383200, 149.9000000000000100 ) ) ; +#1076 = ORIENTED_EDGE ( 'NONE', *, *, #2492, .T. ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383300, 34.89999999999995600 ) ) ; +#1078 = VECTOR ( 'NONE', #2956, 1000.000000000000000 ) ; +#1079 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -10.41165212634383300, 34.89999999999995600 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 13.68905825898311300, 13.25003628046918900, 23.96207824901978600 ) ) ; +#1082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1083 = EDGE_LOOP ( 'NONE', ( #2606, #2566, #2085, #881 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#1085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1086 = AXIS2_PLACEMENT_3D ( 'NONE', #1830, #455, #2072 ) ; +#1087 = ORIENTED_EDGE ( 'NONE', *, *, #2736, .T. ) ; +#1088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ; +#1090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 10.18849987700986900, 16.09658336160411500, 19.18813337315156500 ) ) ; +#1092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1093 = EDGE_LOOP ( 'NONE', ( #1412, #1542, #332, #1515 ) ) ; +#1094 = EDGE_CURVE ( 'NONE', #1841, #1900, #386, .T. ) ; +#1095 = EDGE_CURVE ( 'NONE', #2744, #1595, #2764, .T. ) ; +#1096 = PLANE ( 'NONE', #2685 ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 15.74006723365445000, -25.29267025258846500, 8.408091574663137300 ) ) ; +#1098 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .T. ) ; +#1099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1100 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #1909, #523 ) ; +#1101 = EDGE_LOOP ( 'NONE', ( #191, #2061, #884, #1518 ) ) ; +#1102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1103 = VECTOR ( 'NONE', #855, 1000.000000000000000 ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, -47.20000000000003100, -17.50000000000000400 ) ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( -14.91886083904679300, 7.164502164502164500, 149.9000000000000100 ) ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 1.914572079465440800E-016, 4.999999999999999100, 34.89999999999995600 ) ) ; +#1107 = VECTOR ( 'NONE', #1110, 1000.000000000000000 ) ; +#1108 = AXIS2_PLACEMENT_3D ( 'NONE', #2913, #1535, #156 ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 50.79999999999999700, -17.50000000000000400 ) ) ; +#1110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1111 = LINE ( 'NONE', #1926, #2268 ) ; +#1112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1114 = LINE ( 'NONE', #1921, #1639 ) ; +#1115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #2736, .F. ) ; +#1117 = EDGE_CURVE ( 'NONE', #1831, #2204, #516, .T. ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, -25.39999999999999900, 7.817541634481465000 ) ) ; +#1119 = EDGE_CURVE ( 'NONE', #583, #1944, #308, .T. ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -5.000000000000000900, 149.9000000000000100 ) ) ; +#1121 = VECTOR ( 'NONE', #2396, 1000.000000000000000 ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, -25.39999999999999900, 2.973811673103096200E-015 ) ) ; +#1123 = CYLINDRICAL_SURFACE ( 'NONE', #2617, 2.500000000000000400 ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 5.000000000000000000, 34.89999999999995600 ) ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 14.91886083904679000, -7.164502164502167100, 152.4000000000000100 ) ) ; +#1126 = AXIS2_PLACEMENT_3D ( 'NONE', #2316, #933, #2555 ) ; +#1127 = PLANE ( 'NONE', #1628 ) ; +#1128 = EDGE_LOOP ( 'NONE', ( #2925, #1993, #2210, #2915 ) ) ; +#1129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #1697, .F. ) ; +#1131 = AXIS2_PLACEMENT_3D ( 'NONE', #2341, #958, #2572 ) ; +#1132 = ORIENTED_EDGE ( 'NONE', *, *, #937, .F. ) ; +#1133 = EDGE_LOOP ( 'NONE', ( #2752, #2775, #2873 ) ) ; +#1134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -2.500000000000000000, 34.89999999999995600 ) ) ; +#1136 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .F. ) ; +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #624, .F. ) ; +#1138 = EDGE_CURVE ( 'NONE', #2387, #259, #2230, .T. ) ; +#1139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .F. ) ; +#1141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1142 = EDGE_LOOP ( 'NONE', ( #2539, #787, #2073 ) ) ; +#1143 = CIRCLE ( 'NONE', #2124, 2.500000000000002200 ) ; +#1144 = DIRECTION ( 'NONE', ( 0.4329004329004327900, 0.9014417425405915100, 0.0000000000000000000 ) ) ; +#1145 = DIRECTION ( 'NONE', ( -0.4329004329004327900, -0.9014417425405915100, -0.0000000000000000000 ) ) ; +#1146 = VECTOR ( 'NONE', #1129, 1000.000000000000000 ) ; +#1147 = AXIS2_PLACEMENT_3D ( 'NONE', #1975, #590, #2215 ) ; +#1148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1149 = VECTOR ( 'NONE', #520, 1000.000000000000000 ) ; +#1150 = ORIENTED_EDGE ( 'NONE', *, *, #2219, .T. ) ; +#1151 = ADVANCED_FACE ( 'NONE', ( #1461 ), #1540, .T. ) ; +#1152 = VECTOR ( 'NONE', #879, 1000.000000000000000 ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383200, 149.9000000000000100 ) ) ; +#1154 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2277, #2960, #60, #1665, #288, #1893, #511, #2136, #750, #2365, #982, #2602, #1222, #2822 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.016266328225548900E-005, 0.001131872670829467800, 0.002273908004941191000, 0.002844925671997050800, 0.003415943339052911500, 0.003986961006108771300, 0.004557978673164631500 ), + .UNSPECIFIED. ) ; +#1155 = EDGE_CURVE ( 'NONE', #2418, #2238, #860, .T. ) ; +#1156 = EDGE_CURVE ( 'NONE', #2012, #827, #244, .T. ) ; +#1157 = ORIENTED_EDGE ( 'NONE', *, *, #513, .F. ) ; +#1158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1159 = AXIS2_PLACEMENT_3D ( 'NONE', #760, #1230, #2832 ) ; +#1160 = EDGE_LOOP ( 'NONE', ( #2634, #1613, #408, #907, #2134, #873, #950, #2598, #2645, #1597 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 8.760605227908696300, -25.13390137926044300, 16.16188055304297700 ) ) ; +#1162 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .T. ) ; +#1163 = AXIS2_PLACEMENT_3D ( 'NONE', #460, #2077, #693 ) ; +#1164 = ORIENTED_EDGE ( 'NONE', *, *, #2493, .F. ) ; +#1165 = ADVANCED_FACE ( 'NONE', ( #2010 ), #1566, .F. ) ; +#1166 = FILL_AREA_STYLE ('',( #2552 ) ) ; +#1167 = EDGE_LOOP ( 'NONE', ( #945, #2742, #21, #1657 ) ) ; +#1168 = ORIENTED_EDGE ( 'NONE', *, *, #2899, .T. ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -5.000000000000000900, 34.89999999999995600 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080900, -12.66525648269531400, 32.39999999999995600 ) ) ; +#1171 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ; +#1172 = VECTOR ( 'NONE', #2206, 1000.000000000000000 ) ; +#1173 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #1561, #651 ) ; +#1174 = VERTEX_POINT ( 'NONE', #1118 ) ; +#1175 = LINE ( 'NONE', #2696, #1107 ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 9.686743449295420300, 49.53539151354558400, 17.18056168867306300 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#1178 = CIRCLE ( 'NONE', #746, 9.999999999999998200 ) ; +#1179 = ADVANCED_FACE ( 'NONE', ( #2083 ), #778, .T. ) ; +#1180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1181 = CYLINDRICAL_SURFACE ( 'NONE', #629, 2.499999999999998700 ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383700, 152.4000000000000100 ) ) ; +#1183 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .F. ) ; +#1184 = LINE ( 'NONE', #321, #2954 ) ; +#1185 = DIRECTION ( 'NONE', ( -0.4329004329004327900, 0.9014417425405915100, 6.255008612042414800E-016 ) ) ; +#1186 = CIRCLE ( 'NONE', #2155, 11.55000000000000200 ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, 48.49319804053907700, 17.49999999999999600 ) ) ; +#1188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1189 = EDGE_CURVE ( 'NONE', #1898, #1991, #2620, .T. ) ; +#1190 = EDGE_CURVE ( 'NONE', #117, #1386, #176, .T. ) ; +#1191 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .T. ) ; +#1192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1193 = ADVANCED_FACE ( 'NONE', ( #1927 ), #2486, .F. ) ; +#1194 = EDGE_LOOP ( 'NONE', ( #297, #1562, #972, #1140 ) ) ; +#1195 = AXIS2_PLACEMENT_3D ( 'NONE', #2671, #1305, #819 ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( -9.572860397327206300E-017, -2.500000000000000400, 32.39999999999995600 ) ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #737, .T. ) ; +#1198 = DIRECTION ( 'NONE', ( 0.4329004329004327900, -0.9014417425405915100, 0.0000000000000000000 ) ) ; +#1199 = EDGE_LOOP ( 'NONE', ( #2465, #1343, #1888, #1225 ) ) ; +#1200 = AXIS2_PLACEMENT_3D ( 'NONE', #762, #2377, #996 ) ; +#1201 = EDGE_LOOP ( 'NONE', ( #2292, #2315, #2412, #1242 ) ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( -14.91886083904679000, 7.164502164502161800, 152.4000000000000100 ) ) ; +#1203 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .T. ) ; +#1204 = CYLINDRICAL_SURFACE ( 'NONE', #1688, 2.500000000000000400 ) ; +#1205 = ORIENTED_EDGE ( 'NONE', *, *, #2443, .T. ) ; +#1206 = EDGE_CURVE ( 'NONE', #2429, #2429, #708, .T. ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -22.89999999999999900, 0.0000000000000000000 ) ) ; +#1208 = EDGE_CURVE ( 'NONE', #981, #531, #1399, .T. ) ; +#1209 = ADVANCED_FACE ( 'NONE', ( #1851 ), #2401, .T. ) ; +#1210 = CIRCLE ( 'NONE', #1366, 2.500000000000000000 ) ; +#1211 = AXIS2_PLACEMENT_3D ( 'NONE', #1736, #359, #1970 ) ; +#1212 = VECTOR ( 'NONE', #1102, 1000.000000000000000 ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, -47.20000000000003100, 17.50000000000000000 ) ) ; +#1214 = VECTOR ( 'NONE', #2643, 1000.000000000000000 ) ; +#1215 = FACE_OUTER_BOUND ( 'NONE', #843, .T. ) ; +#1216 = AXIS2_PLACEMENT_3D ( 'NONE', #2199, #809, #2424 ) ; +#1217 = VERTEX_POINT ( 'NONE', #2808 ) ; +#1218 = LINE ( 'NONE', #2257, #518 ) ; +#1219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1220 = ADVANCED_FACE ( 'NONE', ( #1789 ), #1181, .T. ) ; +#1221 = EDGE_LOOP ( 'NONE', ( #2766, #2488, #1488, #290, #1869, #1945, #2535, #1834 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 48.49319804053910600, 10.00000000000001100 ) ) ; +#1223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1225 = ORIENTED_EDGE ( 'NONE', *, *, #2243, .F. ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #2192, .T. ) ; +#1227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1228 = AXIS2_PLACEMENT_3D ( 'NONE', #2163, #1250, #2849 ) ; +#1229 = EDGE_LOOP ( 'NONE', ( #186, #1449, #329, #1511 ) ) ; +#1230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1232 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .F. ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( -10.04796474348397900, 16.18496185904596600, 18.47450148117817300 ) ) ; +#1234 = EDGE_LOOP ( 'NONE', ( #1764, #1876, #2542, #716 ) ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #1094, .F. ) ; +#1236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1237 = ADVANCED_FACE ( 'NONE', ( #637 ), #1334, .T. ) ; +#1238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1239 = VERTEX_POINT ( 'NONE', #744 ) ; +#1240 = AXIS2_PLACEMENT_3D ( 'NONE', #923, #2541, #1158 ) ; +#1241 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1242 = ORIENTED_EDGE ( 'NONE', *, *, #955, .F. ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 10.41165212634383700, 34.89999999999995600 ) ) ; +#1244 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, -25.39999999999999900, -17.50000000000000400 ) ) ; +#1245 = LINE ( 'NONE', #363, #627 ) ; +#1246 = CARTESIAN_POINT ( 'NONE', ( -14.47174587657789500, 12.39053053643899800, 24.36355745318173000 ) ) ; +#1247 = CIRCLE ( 'NONE', #788, 14.05000000000000600 ) ; +#1248 = EDGE_CURVE ( 'NONE', #2668, #1217, #550, .T. ) ; +#1249 = EDGE_CURVE ( 'NONE', #1987, #256, #93, .T. ) ; +#1250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1251 = LINE ( 'NONE', #758, #703 ) ; +#1252 = AXIS2_PLACEMENT_3D ( 'NONE', #514, #988, #2607 ) ; +#1253 = ADVANCED_FACE ( 'NONE', ( #2950 ), #2817, .T. ) ; +#1254 = VECTOR ( 'NONE', #2353, 1000.000000000000000 ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 16.88948023607983400, 49.94533198651209500, 9.411947494897791700 ) ) ; +#1256 = DIRECTION ( 'NONE', ( 3.829144158930879800E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( -18.75849603487694800, 3.354718140586362200, 24.89402956975627400 ) ) ; +#1258 = ORIENTED_EDGE ( 'NONE', *, *, #1974, .F. ) ; +#1259 = SPHERICAL_SURFACE ( 'NONE', #2975, 2.500000000000000000 ) ; +#1260 = AXIS2_PLACEMENT_3D ( 'NONE', #2245, #856, #2469 ) ; +#1261 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .F. ) ; +#1263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, 1.660626566349216200E-032, 149.9000000000000100 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( -16.66443168424961000, -9.281034358511083900, 24.96561028349918500 ) ) ; +#1266 = EDGE_CURVE ( 'NONE', #2778, #2473, #25, .T. ) ; +#1267 = EDGE_CURVE ( 'NONE', #1841, #504, #1706, .T. ) ; +#1268 = EDGE_LOOP ( 'NONE', ( #2253, #1719, #1171, #2420 ) ) ; +#1269 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1270 = DIRECTION ( 'NONE', ( 1.982541115402066300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1271 = VERTEX_POINT ( 'NONE', #1897 ) ; +#1272 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #1602, #225 ) ; +#1273 = ORIENTED_EDGE ( 'NONE', *, *, #2631, .T. ) ; +#1274 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -16.21426840779441400, 17.49999999999998900 ) ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( -11.43297160761126300, -15.24074098956046100, 21.93217775738814300 ) ) ; +#1277 = EDGE_LOOP ( 'NONE', ( #1164, #647, #698, #2570 ) ) ; +#1278 = AXIS2_PLACEMENT_3D ( 'NONE', #1870, #493, #2116 ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 10.41165212634383300, 32.39999999999995600 ) ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #987, .T. ) ; +#1281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( -17.33227288533856800, -23.81735762803154800, 9.833755150206354000 ) ) ; +#1283 = SURFACE_STYLE_FILL_AREA ( #1166 ) ; +#1284 = ORIENTED_EDGE ( 'NONE', *, *, #955, .T. ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 50.79999999999999700, 17.49999999999999600 ) ) ; +#1286 = CIRCLE ( 'NONE', #1200, 2.500000000000002200 ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( 12.60079221867528100, -14.29341469925312700, 23.19232292497575900 ) ) ; +#1288 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1289 = PLANE ( 'NONE', #1964 ) ; +#1290 = VECTOR ( 'NONE', #2016, 1000.000000000000000 ) ; +#1291 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1292 = CARTESIAN_POINT ( 'NONE', ( -14.91886083904679000, -7.164502164502167100, 152.4000000000000100 ) ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -47.20000000000003100, 17.49999999999999600 ) ) ; +#1294 = EDGE_CURVE ( 'NONE', #2031, #267, #2335, .T. ) ; +#1295 = FACE_OUTER_BOUND ( 'NONE', #1093, .T. ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -5.000000000000000900, 32.39999999999995600 ) ) ; +#1297 = LINE ( 'NONE', #1296, #1214 ) ; +#1298 = LINE ( 'NONE', #994, #1149 ) ; +#1299 = EDGE_LOOP ( 'NONE', ( #2198, #445, #469, #562 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( 17.52630694004406200, -7.527485033942801000, 25.01204176539553400 ) ) ; +#1301 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1302 = VECTOR ( 'NONE', #1992, 1000.000000000000000 ) ; +#1303 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#1304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1306 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ; +#1307 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #2459, #1073 ) ; +#1308 = ORIENTED_EDGE ( 'NONE', *, *, #2801, .F. ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( -8.408091574663137300, -25.29267025258846500, 15.74006723365445000 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 18.46236446965563300, 4.793013123927716300, 24.94366239214501100 ) ) ; +#1311 = DIRECTION ( 'NONE', ( 6.938893903907228400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1312 = VERTEX_POINT ( 'NONE', #74 ) ; +#1313 = EDGE_CURVE ( 'NONE', #835, #464, #486, .T. ) ; +#1314 = EDGE_CURVE ( 'NONE', #2021, #2778, #1114, .T. ) ; +#1315 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ; +#1316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1318 = ORIENTED_EDGE ( 'NONE', *, *, #558, .F. ) ; +#1319 = AXIS2_PLACEMENT_3D ( 'NONE', #320, #1928, #541 ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 13.82579111660523100, -2.500000000000000000, 34.89999999999995600 ) ) ; +#1321 = EDGE_LOOP ( 'NONE', ( #1401, #799, #1385, #2002 ) ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 13.21703213237555700, 13.72084364513278100, 23.65969185097493000 ) ) ; +#1323 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #936, .F. ) ; +#1325 = AXIS2_PLACEMENT_3D ( 'NONE', #2294, #451, #673 ) ; +#1326 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 4.999999999999999100, 152.4000000000000100 ) ) ; +#1328 = VECTOR ( 'NONE', #1962, 1000.000000000000000 ) ; +#1329 = CIRCLE ( 'NONE', #2848, 2.500000000000002200 ) ; +#1330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1331 = CYLINDRICAL_SURFACE ( 'NONE', #2056, 2.500000000000000400 ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 10.05994903815680200, 16.17716641581684200, 18.47720443563741100 ) ) ; +#1333 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1334 = TOROIDAL_SURFACE ( 'NONE', #318, 5.000000000000000000, 2.500000000000000000 ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 152.4000000000000100 ) ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( 15.30082764289218700, -25.38632191270632500, 8.052697117567953800 ) ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #2130, .T. ) ; +#1338 = FACE_OUTER_BOUND ( 'NONE', #915, .T. ) ; +#1339 = DIRECTION ( 'NONE', ( 3.829144158930879800E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1340 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531800, 6.082251082251080900, 32.39999999999995600 ) ) ; +#1341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1342 = DIRECTION ( 'NONE', ( 0.9014417425405915100, -0.4329004329004327900, 0.0000000000000000000 ) ) ; +#1343 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 149.9000000000000100 ) ) ; +#1345 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1346 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1347 = EDGE_LOOP ( 'NONE', ( #2783, #70, #204, #1656, #15, #2506, #1002, #1089 ) ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383200, 32.39999999999995600 ) ) ; +#1349 = EDGE_LOOP ( 'NONE', ( #262, #226, #1894, #370 ) ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -29.05000000000000400, 9.453492714272695900E-022 ) ) ; +#1351 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 149.9000000000000100 ) ) ; +#1352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1353 = VERTEX_POINT ( 'NONE', #534 ) ; +#1354 = EDGE_CURVE ( 'NONE', #2888, #2236, #1029, .T. ) ; +#1355 = EDGE_CURVE ( 'NONE', #1924, #1174, #2270, .T. ) ; +#1356 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.469446951953614200E-016, 0.0000000000000000000 ) ) ; +#1357 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1358 = VERTEX_POINT ( 'NONE', #1469 ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.04999999999999700, 0.0000000000000000000 ) ) ; +#1360 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #723 ) ) ; +#1361 = VERTEX_POINT ( 'NONE', #2172 ) ; +#1362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1363 = VECTOR ( 'NONE', #2290, 1000.000000000000000 ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ; +#1365 = CIRCLE ( 'NONE', #897, 5.000000000000000000 ) ; +#1366 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #1737, #362 ) ; +#1367 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1368 = FACE_OUTER_BOUND ( 'NONE', #2256, .T. ) ; +#1369 = FACE_OUTER_BOUND ( 'NONE', #763, .T. ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -47.20000000000003100, 17.49999999999999600 ) ) ; +#1371 = LINE ( 'NONE', #105, #217 ) ; +#1372 = EDGE_CURVE ( 'NONE', #2004, #474, #2863, .T. ) ; +#1373 = EDGE_CURVE ( 'NONE', #2281, #1358, #2794, .T. ) ; +#1374 = FACE_OUTER_BOUND ( 'NONE', #2936, .T. ) ; +#1375 = CIRCLE ( 'NONE', #1935, 2.500000000000002200 ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499999999999999600, 34.89999999999995600 ) ) ; +#1377 = AXIS2_PLACEMENT_3D ( 'NONE', #1724, #572, #1044 ) ; +#1378 = PLANE ( 'NONE', #1272 ) ; +#1379 = ORIENTED_EDGE ( 'NONE', *, *, #2878, .F. ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -25.39999999999999900, 7.817541634481456100 ) ) ; +#1381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1592, #202, #439, #2059, #707, #2323, #942, #2562, #1176, #2779, #1409, #24, #1629, #255 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.016266328225516500E-005, 0.001131872670829426900, 0.002273908004941113300, 0.002844925671996960100, 0.003415943339052807400, 0.003986961006108655100, 0.004557978673164502300 ), + .UNSPECIFIED. ) ; +#1382 = ORIENTED_EDGE ( 'NONE', *, *, #1190, .T. ) ; +#1383 = AXIS2_PLACEMENT_3D ( 'NONE', #1285, #2884, #1506 ) ; +#1384 = ADVANCED_FACE ( 'NONE', ( #1581 ), #2183, .T. ) ; +#1385 = ORIENTED_EDGE ( 'NONE', *, *, #2280, .F. ) ; +#1386 = VERTEX_POINT ( 'NONE', #2859 ) ; +#1387 = EDGE_LOOP ( 'NONE', ( #1507, #1150, #536, #2348 ) ) ; +#1388 = VERTEX_POINT ( 'NONE', #112 ) ; +#1389 = AXIS2_PLACEMENT_3D ( 'NONE', #2220, #831, #2449 ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #1117, .T. ) ; +#1392 = CIRCLE ( 'NONE', #1147, 2.500000000000000000 ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( 8.288886836155633400, -25.33284149808674400, 15.59462271190963800 ) ) ; +#1394 = ADVANCED_FACE ( 'NONE', ( #346 ), #421, .F. ) ; +#1395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1396 = FACE_OUTER_BOUND ( 'NONE', #1464, .T. ) ; +#1397 = VECTOR ( 'NONE', #270, 1000.000000000000000 ) ; +#1398 = SURFACE_STYLE_USAGE ( .BOTH. , #2770 ) ; +#1399 = LINE ( 'NONE', #1651, #1254 ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.49999999999999300 ) ) ; +#1401 = ORIENTED_EDGE ( 'NONE', *, *, #558, .T. ) ; +#1402 = CIRCLE ( 'NONE', #2048, 2.500000000000000000 ) ; +#1403 = DIRECTION ( 'NONE', ( -6.938893903907228400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1404 = EDGE_CURVE ( 'NONE', #835, #356, #962, .T. ) ; +#1405 = EDGE_CURVE ( 'NONE', #2324, #917, #2732, .T. ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#1407 = ADVANCED_FACE ( 'NONE', ( #2187 ), #2052, .F. ) ; +#1408 = AXIS2_PLACEMENT_3D ( 'NONE', #2380, #999, #2616 ) ; +#1409 = CARTESIAN_POINT ( 'NONE', ( 9.894541491494068800, 49.04433584794347200, 17.39391571716475200 ) ) ; +#1410 = ORIENTED_EDGE ( 'NONE', *, *, #737, .F. ) ; +#1411 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1412 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .T. ) ; +#1413 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -5.000000000000002700, 34.89999999999995600 ) ) ; +#1414 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ; +#1415 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1416 = ORIENTED_EDGE ( 'NONE', *, *, #1094, .T. ) ; +#1417 = EDGE_LOOP ( 'NONE', ( #2037, #2670, #1471, #373 ) ) ; +#1418 = EDGE_CURVE ( 'NONE', #2680, #2062, #273, .T. ) ; +#1419 = EDGE_CURVE ( 'NONE', #1271, #2668, #2652, .T. ) ; +#1420 = ADVANCED_FACE ( 'NONE', ( #2586 ), #1051, .F. ) ; +#1421 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1422 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .T. ) ; +#1423 = LINE ( 'NONE', #657, #203 ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251084500, -12.66525648269531200, 34.89999999999995600 ) ) ; +#1425 = AXIS2_PLACEMENT_3D ( 'NONE', #449, #681, #2301 ) ; +#1426 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ; +#1427 = FACE_OUTER_BOUND ( 'NONE', #1268, .T. ) ; +#1428 = CIRCLE ( 'NONE', #2143, 4.999999999999999100 ) ; +#1429 = AXIS2_PLACEMENT_3D ( 'NONE', #1880, #503, #2125 ) ; +#1430 = FACE_OUTER_BOUND ( 'NONE', #1621, .T. ) ; +#1431 = VECTOR ( 'NONE', #303, 1000.000000000000000 ) ; +#1432 = ADVANCED_FACE ( 'NONE', ( #1430 ), #592, .T. ) ; +#1433 = CIRCLE ( 'NONE', #1978, 2.499999999999998700 ) ; +#1434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1435 = LINE ( 'NONE', #368, #220 ) ; +#1436 = ORIENTED_EDGE ( 'NONE', *, *, #1419, .F. ) ; +#1437 = EDGE_CURVE ( 'NONE', #583, #1831, #215, .T. ) ; +#1438 = EDGE_LOOP ( 'NONE', ( #722, #1308, #1426, #2069 ) ) ; +#1439 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .T. ) ; +#1440 = DIRECTION ( 'NONE', ( -3.829144158930879800E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1441 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1442 = ORIENTED_EDGE ( 'NONE', *, *, #904, .T. ) ; +#1443 = ADVANCED_FACE ( 'NONE', ( #1369 ), #1882, .F. ) ; +#1444 = ORIENTED_EDGE ( 'NONE', *, *, #2694, .F. ) ; +#1445 = AXIS2_PLACEMENT_3D ( 'NONE', #2446, #2660, #1304 ) ; +#1446 = ORIENTED_EDGE ( 'NONE', *, *, #954, .F. ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.914572079465439800E-016, 34.89999999999995600 ) ) ; +#1448 = ORIENTED_EDGE ( 'NONE', *, *, #1405, .T. ) ; +#1449 = ORIENTED_EDGE ( 'NONE', *, *, #228, .F. ) ; +#1450 = EDGE_CURVE ( 'NONE', #336, #906, #131, .T. ) ; +#1451 = EDGE_CURVE ( 'NONE', #1271, #847, #2523, .T. ) ; +#1452 = CIRCLE ( 'NONE', #508, 2.500000000000002200 ) ; +#1453 = CARTESIAN_POINT ( 'NONE', ( 14.91886083904679500, 7.164502164502161800, 149.9000000000000100 ) ) ; +#1454 = AXIS2_PLACEMENT_3D ( 'NONE', #2637, #1263, #2864 ) ; +#1455 = TOROIDAL_SURFACE ( 'NONE', #2707, 11.55000000000000400, 2.500000000000000000 ) ; +#1456 = MANIFOLD_SOLID_BREP ( 'Fillet3', #2481 ) ; +#1457 = ADVANCED_FACE ( 'NONE', ( #1295 ), #672, .T. ) ; +#1458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( -10.37487249669072200, 15.97842296350162900, 19.88845934739568500 ) ) ; +#1460 = VECTOR ( 'NONE', #33, 1000.000000000000000 ) ; +#1461 = FACE_OUTER_BOUND ( 'NONE', #1277, .T. ) ; +#1462 = AXIS2_PLACEMENT_3D ( 'NONE', #1153, #1835, #2310 ) ; +#1463 = PLANE ( 'NONE', #1228 ) ; +#1464 = EDGE_LOOP ( 'NONE', ( #1038, #2262, #1729 ) ) ; +#1465 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ; +#1466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -6.938893903907222500E-016, -1.000000000000000000 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 32.39999999999995600 ) ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( -15.06811981137609500, 11.66512987164431300, 24.60193819214064300 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -10.41165212634383200, 34.89999999999995600 ) ) ; +#1470 = ADVANCED_FACE ( 'NONE', ( #2233 ), #991, .F. ) ; +#1471 = ORIENTED_EDGE ( 'NONE', *, *, #1372, .F. ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531100, -6.082251082251083600, 149.9000000000000100 ) ) ; +#1473 = AXIS2_PLACEMENT_3D ( 'NONE', #1517, #141, #1745 ) ; +#1474 = VERTEX_POINT ( 'NONE', #1548 ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( 17.18056168867307000, 49.53539151354559100, 9.686743449295416800 ) ) ; +#1477 = EDGE_LOOP ( 'NONE', ( #1840, #1864, #143, #2574 ) ) ; +#1478 = CARTESIAN_POINT ( 'NONE', ( -19.05020093377896400, 0.9633020767344854200, 24.83804313882523800 ) ) ; +#1479 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .F. ) ; +#1480 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 50.79999999999999700, -2.478176394252583700E-015 ) ) ; +#1481 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -2.500000000000000400, 34.89999999999995600 ) ) ; +#1483 = EDGE_LOOP ( 'NONE', ( #289, #2706, #1604, #2847 ) ) ; +#1484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1486 = CYLINDRICAL_SURFACE ( 'NONE', #2, 5.000000000000000000 ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( -15.34906961321674100, -11.29334207597919200, 24.69056077369579300 ) ) ; +#1488 = ORIENTED_EDGE ( 'NONE', *, *, #2900, .T. ) ; +#1489 = FACE_OUTER_BOUND ( 'NONE', #1663, .T. ) ; +#1490 = EDGE_CURVE ( 'NONE', #2962, #2288, #1608, .T. ) ; +#1491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1492 = EDGE_CURVE ( 'NONE', #2966, #2281, #2824, .T. ) ; +#1493 = VECTOR ( 'NONE', #1968, 1000.000000000000000 ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531200, -6.082251082251084500, 34.89999999999995600 ) ) ; +#1495 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #723 ), #1648 ) ; +#1496 = VECTOR ( 'NONE', #579, 1000.000000000000000 ) ; +#1497 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1498 = CARTESIAN_POINT ( 'NONE', ( -10.73193893256847500, -15.74083889945785600, 20.76616088619260800 ) ) ; +#1499 = FACE_OUTER_BOUND ( 'NONE', #1201, .T. ) ; +#1500 = CIRCLE ( 'NONE', #1823, 2.500000000000000000 ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -5.000000000000000900, 149.9000000000000100 ) ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#1503 = AXIS2_PLACEMENT_3D ( 'NONE', #826, #2440, #1058 ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( -17.08942073814193900, -24.28259689384528400, 9.599526219158564200 ) ) ; +#1505 = LINE ( 'NONE', #2730, #2658 ) ; +#1506 = DIRECTION ( 'NONE', ( 1.040834085586084500E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1507 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 13.53790042059384300, -13.41030392412015400, 23.87812695100987200 ) ) ; +#1509 = EDGE_CURVE ( 'NONE', #354, #2962, #454, .T. ) ; +#1510 = EDGE_CURVE ( 'NONE', #2383, #2710, #383, .T. ) ; +#1511 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( -7.164502164502166300, -14.91886083904678800, 152.4000000000000100 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#1514 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1515 = ORIENTED_EDGE ( 'NONE', *, *, #1865, .F. ) ; +#1516 = AXIS2_PLACEMENT_3D ( 'NONE', #2667, #1301, #2896 ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -10.41165212634383300, 149.9000000000000100 ) ) ; +#1518 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 32.39999999999995600 ) ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 18.31933985120620200, -5.247705647175822100, 24.95653292414751300 ) ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -10.41165212634383300, 152.4000000000000100 ) ) ; +#1522 = ORIENTED_EDGE ( 'NONE', *, *, #2080, .T. ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 34.89999999999995600 ) ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#1525 = ORIENTED_EDGE ( 'NONE', *, *, #2801, .T. ) ; +#1526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1527 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .F. ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000000, 32.39999999999995600 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( -8.052697117567955600, -25.38632191270633200, 15.30082764289218600 ) ) ; +#1530 = VECTOR ( 'NONE', #2935, 1000.000000000000000 ) ; +#1531 = DIRECTION ( 'NONE', ( -0.9014417425405915100, -0.4329004329004327900, 0.0000000000000000000 ) ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( 17.86634451014846900, 6.628172800641194400, 24.99322805813223900 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, 17.49999999999999600 ) ) ; +#1534 = CYLINDRICAL_SURFACE ( 'NONE', #1325, 14.05000000000000800 ) ; +#1535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1536 = SURFACE_STYLE_USAGE ( .BOTH. , #2914 ) ; +#1537 = AXIS2_PLACEMENT_3D ( 'NONE', #327, #1934, #547 ) ; +#1538 = VECTOR ( 'NONE', #2096, 1000.000000000000000 ) ; +#1539 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1540 = TOROIDAL_SURFACE ( 'NONE', #1914, 5.000000000000000000, 2.500000000000000000 ) ; +#1541 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1542 = ORIENTED_EDGE ( 'NONE', *, *, #65, .F. ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 12.59208733929281900, 14.30107305827485400, 23.18484246966968600 ) ) ; +#1544 = CARTESIAN_POINT ( 'NONE', ( 14.91886083904679300, 7.164502164502162700, 152.4000000000000100 ) ) ; +#1545 = LINE ( 'NONE', #2293, #312 ) ; +#1546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 17.47792798127924000, -23.28044930966249400, 9.977845042407310000 ) ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, -5.000000000000000900, 152.4000000000000100 ) ) ; +#1549 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2442 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #2763, #1838, #463 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1550 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 152.4000000000000100 ) ) ; +#1551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1552 = EDGE_LOOP ( 'NONE', ( #1016, #2807, #522, #1137 ) ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 5.000000000000000000, 32.39999999999995600 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 16.21426840779448100, 17.74617002144968600 ) ) ; +#1555 = ORIENTED_EDGE ( 'NONE', *, *, #1267, .T. ) ; +#1556 = EDGE_CURVE ( 'NONE', #2314, #2937, #1068, .T. ) ; +#1557 = EDGE_CURVE ( 'NONE', #2204, #1991, #2152, .T. ) ; +#1558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1559 = EDGE_LOOP ( 'NONE', ( #1758, #2976, #5, #1859 ) ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -25.39999999999999900, 7.817541634481456100 ) ) ; +#1561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1562 = ORIENTED_EDGE ( 'NONE', *, *, #2444, .T. ) ; +#1563 = AXIS2_PLACEMENT_3D ( 'NONE', #85, #1685, #314 ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, -17.50000000000000400 ) ) ; +#1565 = VERTEX_POINT ( 'NONE', #2331 ) ; +#1566 = PLANE ( 'NONE', #2553 ) ; +#1567 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 48.29999999999999700, -17.50000000000000400 ) ) ; +#1568 = DIRECTION ( 'NONE', ( 3.829144158930881000E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1569 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ; +#1570 = ORIENTED_EDGE ( 'NONE', *, *, #735, .T. ) ; +#1571 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1572 = FACE_OUTER_BOUND ( 'NONE', #1722, .T. ) ; +#1573 = ORIENTED_EDGE ( 'NONE', *, *, #1660, .F. ) ; +#1574 = VECTOR ( 'NONE', #2505, 1000.000000000000000 ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, -25.39999999999999900, -17.49999999999999600 ) ) ; +#1576 = CIRCLE ( 'NONE', #1060, 4.999999999999999100 ) ; +#1577 = EDGE_CURVE ( 'NONE', #115, #2259, #304, .T. ) ; +#1578 = EDGE_CURVE ( 'NONE', #2288, #1987, #2689, .T. ) ; +#1579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1581 = FACE_OUTER_BOUND ( 'NONE', #2351, .T. ) ; +#1582 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1583 = AXIS2_PLACEMENT_3D ( 'NONE', #1400, #17, #1622 ) ; +#1584 = CYLINDRICAL_SURFACE ( 'NONE', #147, 14.05000000000000600 ) ; +#1585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1586 = CIRCLE ( 'NONE', #582, 2.500000000000002200 ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 50.79999999999999700, 0.0000000000000000000 ) ) ; +#1588 = VECTOR ( 'NONE', #2484, 1000.000000000000000 ) ; +#1589 = AXIS2_PLACEMENT_3D ( 'NONE', #2795, #2105, #2349 ) ; +#1590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1591 = ORIENTED_EDGE ( 'NONE', *, *, #2297, .T. ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 7.817541634481461400, 50.79999999999999700, 14.99999999999999600 ) ) ; +#1593 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .F. ) ; +#1594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1595 = VERTEX_POINT ( 'NONE', #1424 ) ; +#1596 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -2.500000000000000400, 34.89999999999995600 ) ) ; +#1597 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ; +#1598 = EDGE_CURVE ( 'NONE', #499, #1944, #926, .T. ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 50.79999999999999700, -17.49999999999999600 ) ) ; +#1600 = ORIENTED_EDGE ( 'NONE', *, *, #2113, .F. ) ; +#1601 = VERTEX_POINT ( 'NONE', #39 ) ; +#1602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.486905836551548300E-016 ) ) ; +#1603 = ADVANCED_FACE ( 'NONE', ( #241 ), #858, .T. ) ; +#1604 = ORIENTED_EDGE ( 'NONE', *, *, #973, .F. ) ; +#1605 = VECTOR ( 'NONE', #395, 1000.000000000000000 ) ; +#1606 = AXIS2_PLACEMENT_3D ( 'NONE', #2924, #1546, #170 ) ; +#1607 = VECTOR ( 'NONE', #2978, 1000.000000000000000 ) ; +#1608 = CIRCLE ( 'NONE', #2119, 2.500000000000000400 ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 50.79999999999999700, 0.0000000000000000000 ) ) ; +#1610 = EDGE_CURVE ( 'NONE', #1565, #531, #2618, .T. ) ; +#1611 = EDGE_CURVE ( 'NONE', #730, #2680, #2006, .T. ) ; +#1612 = CIRCLE ( 'NONE', #1319, 14.05000000000000800 ) ; +#1613 = ORIENTED_EDGE ( 'NONE', *, *, #1418, .T. ) ; +#1614 = ADVANCED_FACE ( 'NONE', ( #2081 ), #1331, .F. ) ; +#1615 = FACE_OUTER_BOUND ( 'NONE', #1133, .T. ) ; +#1616 = AXIS2_PLACEMENT_3D ( 'NONE', #2874, #1497, #118 ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( 7.933790589236445500, -25.39999999999999900, 15.15002851521544600 ) ) ; +#1618 = EDGE_LOOP ( 'NONE', ( #234, #875, #2741 ) ) ; +#1619 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1620 = ORIENTED_EDGE ( 'NONE', *, *, #1716, .F. ) ; +#1621 = EDGE_LOOP ( 'NONE', ( #652, #2559, #1949 ) ) ; +#1622 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.821231995776175500E-016 ) ) ; +#1623 = ADVANCED_FACE ( 'NONE', ( #773 ), #2592, .F. ) ; +#1624 = PLANE ( 'NONE', #2558 ) ; +#1625 = ORIENTED_EDGE ( 'NONE', *, *, #1294, .T. ) ; +#1626 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .F. ) ; +#1627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1628 = AXIS2_PLACEMENT_3D ( 'NONE', #205, #2050, #660 ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000400, 48.49319804053909900, 17.49999999999999600 ) ) ; +#1630 = EDGE_LOOP ( 'NONE', ( #1076, #2850, #1045 ) ) ; +#1631 = LINE ( 'NONE', #2252, #413 ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( -8.760616917277534600, 50.53389405542253600, 16.16189411702417900 ) ) ; +#1633 = DIRECTION ( 'NONE', ( 0.9014417425405915100, 0.4329004329004327900, 0.0000000000000000000 ) ) ; +#1634 = FACE_OUTER_BOUND ( 'NONE', #1347, .T. ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383500, 5.000000000000000000, 34.89999999999995600 ) ) ; +#1636 = CIRCLE ( 'NONE', #914, 2.499999999999999600 ) ; +#1637 = ADVANCED_FACE ( 'NONE', ( #1925 ), #2483, .T. ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, 101.5999999999999900, 0.0000000000000000000 ) ) ; +#1639 = VECTOR ( 'NONE', #1236, 1000.000000000000000 ) ; +#1640 = LINE ( 'NONE', #2971, #1031 ) ; +#1641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1642 = LINE ( 'NONE', #1713, #966 ) ; +#1643 = PLANE ( 'NONE', #478 ) ; +#1644 = EDGE_CURVE ( 'NONE', #2744, #1271, #92, .T. ) ; +#1645 = EDGE_CURVE ( 'NONE', #747, #1312, #2556, .T. ) ; +#1646 = LINE ( 'NONE', #184, #1588 ) ; +#1647 = ORIENTED_EDGE ( 'NONE', *, *, #2510, .T. ) ; +#1648 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2756 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #158, #1765, #389 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1649 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 32.39999999999995600 ) ) ; +#1650 = EDGE_LOOP ( 'NONE', ( #871, #2755, #1012, #1053, #1041, #323 ) ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -29.05000000000000400, -17.50000000000000400 ) ) ; +#1652 = ADVANCED_FACE ( 'NONE', ( #172 ), #23, .F. ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #886, .T. ) ; +#1654 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383500, 4.999999999999998200, 34.89999999999995600 ) ) ; +#1656 = ORIENTED_EDGE ( 'NONE', *, *, #885, .T. ) ; +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #2800, .F. ) ; +#1658 = EDGE_CURVE ( 'NONE', #1896, #364, #1251, .T. ) ; +#1659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1660 = EDGE_CURVE ( 'NONE', #465, #917, #634, .T. ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #1598, .F. ) ; +#1662 = AXIS2_PLACEMENT_3D ( 'NONE', #1748, #372, #1983 ) ; +#1663 = EDGE_LOOP ( 'NONE', ( #682, #1874, #1315 ) ) ; +#1664 = ADVANCED_FACE ( 'NONE', ( #1848 ), #2945, .F. ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( -16.16189411702417900, 50.53389405542253600, 8.760616917277536300 ) ) ; +#1666 = LINE ( 'NONE', #2467, #666 ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, -9.023654377385075000E-016, 152.4000000000000100 ) ) ; +#1668 = CIRCLE ( 'NONE', #854, 12.50000000000000000 ) ; +#1669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1670 = AXIS2_PLACEMENT_3D ( 'NONE', #1033, #1042, #1733 ) ; +#1671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1672 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1003, #529, #784, #2395, #1014, #2628, #1255, #2853, #1476, #99, #1702, #330, #1938, #551 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.016266328225517900E-005, 0.001131872670829456300, 0.002273908004941172300, 0.002844925671997036900, 0.003415943339052901900, 0.003986961006108767800, 0.004557978673164632400 ), + .UNSPECIFIED. ) ; +#1673 = FACE_OUTER_BOUND ( 'NONE', #334, .T. ) ; +#1674 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881000E-017, 0.0000000000000000000 ) ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( -1.660626566349216500E-032, -4.336808689942017700E-016, 149.9000000000000100 ) ) ; +#1676 = DIRECTION ( 'NONE', ( -3.829144158930879800E-017, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1677 = ORIENTED_EDGE ( 'NONE', *, *, #2878, .T. ) ; +#1678 = CYLINDRICAL_SURFACE ( 'NONE', #34, 2.500000000000000000 ) ; +#1679 = ADVANCED_FACE ( 'NONE', ( #2398 ), #1786, .F. ) ; +#1680 = AXIS2_PLACEMENT_3D ( 'NONE', #2185, #798, #2413 ) ; +#1681 = DIRECTION ( 'NONE', ( -0.9014417425405915100, -0.4329004329004324500, 0.0000000000000000000 ) ) ; +#1682 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .T. ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( -10.94464625373622000, 15.59521838940312400, 21.17243864536945400 ) ) ; +#1684 = ORIENTED_EDGE ( 'NONE', *, *, #2650, .T. ) ; +#1685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1686 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, 0.0000000000000000000 ) ) ; +#1687 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ; +#1688 = AXIS2_PLACEMENT_3D ( 'NONE', #687, #231, #2308 ) ; +#1689 = ORIENTED_EDGE ( 'NONE', *, *, #2596, .F. ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -2.500000000000000400, 32.39999999999995600 ) ) ; +#1691 = ADVANCED_FACE ( 'NONE', ( #2332 ), #1913, .T. ) ; +#1692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( -15.90219343582516000, 10.50010769190826700, 24.83328341088721900 ) ) ; +#1694 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .F. ) ; +#1695 = ORIENTED_EDGE ( 'NONE', *, *, #1850, .F. ) ; +#1696 = EDGE_CURVE ( 'NONE', #2922, #356, #548, .T. ) ; +#1697 = EDGE_CURVE ( 'NONE', #499, #2031, #1704, .T. ) ; +#1698 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1699 = SPHERICAL_SURFACE ( 'NONE', #1899, 2.500000000000000000 ) ; +#1700 = AXIS2_PLACEMENT_3D ( 'NONE', #775, #2389, #1008 ) ; +#1701 = LINE ( 'NONE', #1327, #480 ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( 17.39391571716475900, 49.04433584794347900, 9.894541491494058100 ) ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( -19.03130733040009700, -0.9741598970961743400, 24.84210785590959200 ) ) ; +#1704 = LINE ( 'NONE', #1690, #482 ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383300, -5.000000000000000900, 34.89999999999995600 ) ) ; +#1706 = CIRCLE ( 'NONE', #1408, 12.50000000000000000 ) ; +#1707 = AXIS2_PLACEMENT_3D ( 'NONE', #2719, #2951, #1571 ) ; +#1708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1709 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .T. ) ; +#1710 = FACE_OUTER_BOUND ( 'NONE', #43, .T. ) ; +#1711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251083600, -12.66525648269531100, 32.39999999999995600 ) ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 13.82579111660523300, 34.89999999999995600 ) ) ; +#1714 = SPHERICAL_SURFACE ( 'NONE', #2312, 2.500000000000000000 ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( -14.46171801534493400, -12.40900484138170200, 24.36449810196412700 ) ) ; +#1716 = EDGE_CURVE ( 'NONE', #1239, #1601, #1111, .T. ) ; +#1717 = EDGE_CURVE ( 'NONE', #66, #706, #2861, .T. ) ; +#1718 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .T. ) ; +#1719 = ORIENTED_EDGE ( 'NONE', *, *, #1849, .T. ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -22.89999999999999900, 17.49999999999999600 ) ) ; +#1721 = AXIS2_PLACEMENT_3D ( 'NONE', #2092, #709, #2326 ) ; +#1722 = EDGE_LOOP ( 'NONE', ( #122, #154, #1941, #862 ) ) ; +#1723 = PLANE ( 'NONE', #1985 ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 48.29999999999999700, 17.50000000000000400 ) ) ; +#1725 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( -10.38362989667160500, -15.97151871865359900, 19.88006426122624100 ) ) ; +#1727 = AXIS2_PLACEMENT_3D ( 'NONE', #67, #1671, #296 ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, 17.49999999999999600 ) ) ; +#1729 = ORIENTED_EDGE ( 'NONE', *, *, #2835, .T. ) ; +#1730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( -16.77970220944725800, -24.66292844031368500, 9.310616879071897500 ) ) ; +#1732 = ORIENTED_EDGE ( 'NONE', *, *, #1372, .T. ) ; +#1733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1734 = ORIENTED_EDGE ( 'NONE', *, *, #2381, .F. ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( 14.16469092927481200, -12.74041626356048500, 24.21970664180272700 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.49999999999999300 ) ) ; +#1737 = DIRECTION ( 'NONE', ( 3.469446951953613700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1738 = ORIENTED_EDGE ( 'NONE', *, *, #576, .F. ) ; +#1739 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1740 = FACE_OUTER_BOUND ( 'NONE', #1387, .T. ) ; +#1741 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#1742 = EDGE_CURVE ( 'NONE', #2062, #2337, #1178, .T. ) ; +#1743 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1744 = LINE ( 'NONE', #1370, #509 ) ; +#1745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1746 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( 18.66734550437434200, -3.830028868865595900, 24.90942743840531600 ) ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 149.9000000000000100 ) ) ; +#1749 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1750 = LINE ( 'NONE', #298, #2304 ) ; +#1751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1752 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1753 = ORIENTED_EDGE ( 'NONE', *, *, #1953, .T. ) ; +#1754 = AXIS2_PLACEMENT_3D ( 'NONE', #1523, #1986, #2681 ) ; +#1755 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.469446951953613700E-016, -0.0000000000000000000 ) ) ; +#1756 = LINE ( 'NONE', #1575, #1152 ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( -7.817541634481457900, -25.39999999999999900, 15.00000000000000000 ) ) ; +#1758 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 17.30605432809586100, 7.977316536512523400, 25.00055084011790300 ) ) ; +#1760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1762 = EDGE_CURVE ( 'NONE', #1361, #696, #419, .T. ) ; +#1763 = EDGE_CURVE ( 'NONE', #1868, #1050, #1636, .T. ) ; +#1764 = ORIENTED_EDGE ( 'NONE', *, *, #2563, .T. ) ; +#1765 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1766 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 48.29999999999999700, 17.49999999999999600 ) ) ; +#1767 = ORIENTED_EDGE ( 'NONE', *, *, #1294, .F. ) ; +#1768 = AXIS2_PLACEMENT_3D ( 'NONE', #2714, #1341, #2946 ) ; +#1769 = ORIENTED_EDGE ( 'NONE', *, *, #2242, .F. ) ; +#1770 = DIRECTION ( 'NONE', ( -1.156482317317871700E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( 11.70970848820861800, 15.03077515597422200, 22.28580798483601900 ) ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#1773 = VERTEX_POINT ( 'NONE', #1482 ) ; +#1774 = AXIS2_PLACEMENT_3D ( 'NONE', #1609, #2758, #1395 ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 17.33227288533857900, -23.81735762803154800, 9.833755150206348700 ) ) ; +#1776 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ; +#1777 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976807100E-015, 0.0000000000000000000 ) ) ; +#1778 = ORIENTED_EDGE ( 'NONE', *, *, #2362, .F. ) ; +#1779 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251081800, 12.66525648269531200, 34.89999999999995600 ) ) ; +#1780 = CIRCLE ( 'NONE', #1307, 2.500000000000002200 ) ; +#1781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1782 = CIRCLE ( 'NONE', #1108, 5.000000000000000000 ) ; +#1783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 2.500000000000000000, 149.9000000000000100 ) ) ; +#1785 = AXIS2_PLACEMENT_3D ( 'NONE', #848, #2464, #1079 ) ; +#1786 = SPHERICAL_SURFACE ( 'NONE', #2659, 2.500000000000000000 ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -5.000000000000000000, 34.89999999999995600 ) ) ; +#1788 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930879800E-017, 0.0000000000000000000 ) ) ; +#1789 = FACE_OUTER_BOUND ( 'NONE', #2091, .T. ) ; +#1790 = EDGE_LOOP ( 'NONE', ( #2343, #1778, #656, #2374 ) ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 34.89999999999995600 ) ) ; +#1792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1793 = LINE ( 'NONE', #1929, #1121 ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080000, 12.66525648269531400, 34.89999999999995600 ) ) ; +#1795 = VECTOR ( 'NONE', #1743, 1000.000000000000000 ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -19.04999999999999700, 2.478176394252581600E-016 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.000000000000000900, 32.39999999999995600 ) ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 2.023844055306274700E-015, -25.39999999999999900, 17.49999999999999600 ) ) ; +#1799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1800 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .T. ) ; +#1801 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1802 = ORIENTED_EDGE ( 'NONE', *, *, #2020, .T. ) ; +#1803 = EDGE_CURVE ( 'NONE', #2295, #2236, #2793, .T. ) ; +#1804 = EDGE_CURVE ( 'NONE', #917, #2473, #1576, .T. ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 149.9000000000000100 ) ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -1.109585399036061300E-015, 152.4000000000000100 ) ) ; +#1807 = VERTEX_POINT ( 'NONE', #2415 ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 7.817541634481461400, -25.39999999999999900, 14.99999999999999600 ) ) ; +#1809 = VERTEX_POINT ( 'NONE', #801 ) ; +#1810 = AXIS2_PLACEMENT_3D ( 'NONE', #1406, #22, #1627 ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 4.999999999999999100, 149.9000000000000100 ) ) ; +#1812 = VERTEX_POINT ( 'NONE', #1494 ) ; +#1813 = VERTEX_POINT ( 'NONE', #116 ) ; +#1814 = AXIS2_PLACEMENT_3D ( 'NONE', #1533, #153, #1761 ) ; +#1815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, -17.50000000000000400 ) ) ; +#1817 = EDGE_LOOP ( 'NONE', ( #1836, #713, #1391, #878 ) ) ; +#1818 = VECTOR ( 'NONE', #1676, 1000.000000000000000 ) ; +#1819 = CYLINDRICAL_SURFACE ( 'NONE', #75, 2.500000000000000400 ) ; +#1820 = EDGE_CURVE ( 'NONE', #2773, #2806, #893, .T. ) ; +#1821 = EDGE_CURVE ( 'NONE', #920, #354, #2109, .T. ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -5.000000000000000000, 32.39999999999995600 ) ) ; +#1823 = AXIS2_PLACEMENT_3D ( 'NONE', #1070, #2678, #1311 ) ; +#1824 = VECTOR ( 'NONE', #1954, 1000.000000000000000 ) ; +#1825 = CIRCLE ( 'NONE', #233, 2.500000000000000400 ) ; +#1826 = ORIENTED_EDGE ( 'NONE', *, *, #644, .T. ) ; +#1827 = FACE_OUTER_BOUND ( 'NONE', #1194, .T. ) ; +#1828 = AXIS2_PLACEMENT_3D ( 'NONE', #2005, #618, #2248 ) ; +#1829 = ORIENTED_EDGE ( 'NONE', *, *, #2296, .F. ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 14.91886083904678800, -7.164502164502167100, 149.9000000000000100 ) ) ; +#1831 = VERTEX_POINT ( 'NONE', #317 ) ; +#1832 = CARTESIAN_POINT ( 'NONE', ( 9.894540175320754500, -23.64434042829266900, 17.39391438536099300 ) ) ; +#1833 = ADVANCED_FACE ( 'NONE', ( #2729 ), #959, .T. ) ; +#1834 = ORIENTED_EDGE ( 'NONE', *, *, #1490, .T. ) ; +#1835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1836 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .T. ) ; +#1837 = AXIS2_PLACEMENT_3D ( 'NONE', #2175, #2402, #1698 ) ; +#1838 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1839 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ; +#1840 = ORIENTED_EDGE ( 'NONE', *, *, #227, .T. ) ; +#1841 = VERTEX_POINT ( 'NONE', #357 ) ; +#1842 = VECTOR ( 'NONE', #1291, 1000.000000000000000 ) ; +#1843 = STYLED_ITEM ( 'NONE', ( #2221 ), #2983 ) ; +#1844 = ADVANCED_FACE ( 'NONE', ( #271 ), #1723, .T. ) ; +#1845 = LINE ( 'NONE', #614, #2328 ) ; +#1846 = ORIENTED_EDGE ( 'NONE', *, *, #795, .T. ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( -8.290602356070206000, 50.74558836369040900, 15.59948156386134600 ) ) ; +#1848 = FACE_OUTER_BOUND ( 'NONE', #2179, .T. ) ; +#1849 = EDGE_CURVE ( 'NONE', #1217, #115, #2049, .T. ) ; +#1850 = EDGE_CURVE ( 'NONE', #2673, #1924, #291, .T. ) ; +#1851 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 13.82579111660523100, 32.39999999999995600 ) ) ; +#1853 = EDGE_LOOP ( 'NONE', ( #1620, #1753, #1776, #569 ) ) ; +#1854 = CYLINDRICAL_SURFACE ( 'NONE', #2654, 2.500000000000000000 ) ; +#1855 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #1933, #546 ) ; +#1856 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( -9.310624109301235400, 50.06292039916419900, 16.77971008993672800 ) ) ; +#1858 = ADVANCED_FACE ( 'NONE', ( #808 ), #1961, .F. ) ; +#1859 = ORIENTED_EDGE ( 'NONE', *, *, #2596, .T. ) ; +#1860 = AXIS2_PLACEMENT_3D ( 'NONE', #2047, #658, #2283 ) ; +#1861 = DIRECTION ( 'NONE', ( 6.938893903907228400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1862 = ORIENTED_EDGE ( 'NONE', *, *, #839, .F. ) ; +#1863 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1864 = ORIENTED_EDGE ( 'NONE', *, *, #2750, .F. ) ; +#1865 = EDGE_CURVE ( 'NONE', #2773, #847, #1428, .T. ) ; +#1866 = EDGE_CURVE ( 'NONE', #1831, #465, #2582, .T. ) ; +#1867 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1868 = VERTEX_POINT ( 'NONE', #1080 ) ; +#1869 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .T. ) ; +#1870 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -4.336808689942017700E-016, 149.9000000000000100 ) ) ; +#1871 = AXIS2_PLACEMENT_3D ( 'NONE', #1177, #2781, #1411 ) ; +#1872 = ADVANCED_FACE ( 'NONE', ( #1368 ), #2521, .T. ) ; +#1873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1874 = ORIENTED_EDGE ( 'NONE', *, *, #2042, .F. ) ; +#1875 = CIRCLE ( 'NONE', #1086, 2.499999999999999100 ) ; +#1876 = ORIENTED_EDGE ( 'NONE', *, *, #1419, .T. ) ; +#1877 = DIRECTION ( 'NONE', ( -3.829144158930881000E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1878 = CIRCLE ( 'NONE', #1039, 2.500000000000000400 ) ; +#1879 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #2322, 'design' ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -22.89999999999999900, -17.50000000000000400 ) ) ; +#1881 = LINE ( 'NONE', #403, #1290 ) ; +#1882 = CYLINDRICAL_SURFACE ( 'NONE', #1195, 2.500000000000002200 ) ; +#1883 = LINE ( 'NONE', #1480, #674 ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -5.000000000000000900, 149.9000000000000100 ) ) ; +#1885 = ADVANCED_FACE ( 'NONE', ( #734 ), #2649, .F. ) ; +#1886 = TOROIDAL_SURFACE ( 'NONE', #2903, 5.000000000000000000, 2.500000000000000000 ) ; +#1887 = EDGE_CURVE ( 'NONE', #431, #2966, #1881, .T. ) ; +#1888 = ORIENTED_EDGE ( 'NONE', *, *, #718, .F. ) ; +#1889 = TOROIDAL_SURFACE ( 'NONE', #2266, 9.999999999999998200, 2.500000000000000000 ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.914572079465440500E-016, 34.89999999999995600 ) ) ; +#1891 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1906, #2151, #1233, #2834, #1459, #82, #1683, #310, #1919, #532, #2161, #772, #2386, #1005, #2622, #1246, #2846, #1468, #91, #1693, #322, #1930, #544, #2169, #786, #2397, #1015, #2629, #1257, #2856, #1478, #101, #1703, #331, #1940, #553, #2181, #793, #2410, #1024, #2638, #1265, #2866, #1487, #110, #1715, #344, #1948, #564, #2189, #805, #2419, #1037, #2648, #1276, #2875, #1498, #121, #1726, #351, #1960, #573, #2203, #813, #2430, #1046 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001454737090578917000, 0.002909474181157834000, 0.004364211271736751800, 0.005818948362315667900, 0.007273685452894584900, 0.008728422543473503600, 0.009455791088762960400, 0.01018315963405241700, 0.01163789672463132500, 0.01309263381521023000, 0.01454737090578913300, 0.01745684508694694800, 0.01891158217752586200, 0.02036631926810476800, 0.02327579344926258500, 0.02473053053984149500, 0.02618526763042040900, 0.02909474181157822500, 0.03054947890215713900, 0.03200421599273604900, 0.03491369017389386900, 0.03636842726447278600, 0.03782316435505169600, 0.03855053290034114700, 0.03927790144563059900, 0.04073263853620951600, 0.04218737562678842600, 0.04364211271736733600, 0.04436948126265679400, 0.04509684980794625300, 0.04582421835323571100, 0.04655158689852517000 ), + .UNSPECIFIED. ) ; +#1892 = ORIENTED_EDGE ( 'NONE', *, *, #2750, .T. ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( -16.77971008993672400, 50.06292039916419900, 9.310624109301239000 ) ) ; +#1894 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -25.39999999999999900, 9.453492714272695900E-022 ) ) ; +#1896 = VERTEX_POINT ( 'NONE', #2475 ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -10.41165212634383200, 149.9000000000000100 ) ) ; +#1898 = VERTEX_POINT ( 'NONE', #1553 ) ; +#1899 = AXIS2_PLACEMENT_3D ( 'NONE', #155, #601, #2231 ) ; +#1900 = VERTEX_POINT ( 'NONE', #2258 ) ; +#1901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1902 = ADVANCED_FACE ( 'NONE', ( #52 ), #1819, .F. ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -19.04999999999999700, 9.453492714272695900E-022 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 34.89999999999995600 ) ) ; +#1905 = VERTEX_POINT ( 'NONE', #2713 ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, 16.21426840779441700, 17.49999999999999600 ) ) ; +#1907 = EDGE_LOOP ( 'NONE', ( #35, #84, #1235, #2890 ) ) ; +#1908 = EDGE_CURVE ( 'NONE', #2004, #2021, #130, .T. ) ; +#1909 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1910 = EDGE_CURVE ( 'NONE', #1353, #465, #2435, .T. ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976806900E-015, -25.39999999999999900, 14.99999999999999800 ) ) ; +#1912 = ORIENTED_EDGE ( 'NONE', *, *, #954, .T. ) ; +#1913 = PLANE ( 'NONE', #589 ) ; +#1914 = AXIS2_PLACEMENT_3D ( 'NONE', #2416, #1781, #2017 ) ; +#1915 = ORIENTED_EDGE ( 'NONE', *, *, #1314, .T. ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 4.999999999999999100, 149.9000000000000100 ) ) ; +#1917 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1918 = LINE ( 'NONE', #125, #2551 ) ; +#1919 = CARTESIAN_POINT ( 'NONE', ( -11.71188773465426200, 15.02908078163909700, 22.28843546057312600 ) ) ; +#1920 = FACE_OUTER_BOUND ( 'NONE', #1128, .T. ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -2.500000000000000000, 32.39999999999995600 ) ) ; +#1922 = ADVANCED_FACE ( 'NONE', ( #670 ), #880, .T. ) ; +#1923 = AXIS2_PLACEMENT_3D ( 'NONE', #2774, #1403, #18 ) ; +#1924 = VERTEX_POINT ( 'NONE', #2958 ) ; +#1925 = FACE_OUTER_BOUND ( 'NONE', #1349, .T. ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531400, 6.082251082251080900, 32.39999999999995600 ) ) ; +#1927 = FACE_OUTER_BOUND ( 'NONE', #2123, .T. ) ; +#1928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1929 = CARTESIAN_POINT ( 'NONE', ( 2.023844055306274700E-015, -22.89999999999999900, 17.49999999999999600 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( -16.65862348007411200, 9.253605296393518000, 24.95683267884355400 ) ) ; +#1931 = EDGE_LOOP ( 'NONE', ( #2247, #2358, #617, #2414 ) ) ; +#1932 = VECTOR ( 'NONE', #1223, 1000.000000000000000 ) ; +#1933 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1935 = AXIS2_PLACEMENT_3D ( 'NONE', #2917, #1539, #161 ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, -17.50000000000000400 ) ) ; +#1937 = ORIENTED_EDGE ( 'NONE', *, *, #795, .F. ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000001100, 48.49319804053911300, 10.00000000000000200 ) ) ; +#1939 = PLANE ( 'NONE', #1054 ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( -18.90100887455161100, -2.426330433337313700, 24.86836165582238000 ) ) ; +#1941 = ORIENTED_EDGE ( 'NONE', *, *, #2751, .T. ) ; +#1942 = DIRECTION ( 'NONE', ( 0.9014417425405909500, -0.4329004329004335100, 0.0000000000000000000 ) ) ; +#1943 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251082700, 12.66525648269531400, 149.9000000000000100 ) ) ; +#1944 = VERTEX_POINT ( 'NONE', #195 ) ; +#1945 = ORIENTED_EDGE ( 'NONE', *, *, #484, .T. ) ; +#1946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -9.572860397327206300E-017, 32.39999999999995600 ) ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( -13.68905825898310300, -13.25003628046920000, 23.96207824901978300 ) ) ; +#1949 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ; +#1950 = ORIENTED_EDGE ( 'NONE', *, *, #1866, .T. ) ; +#1951 = EDGE_CURVE ( 'NONE', #1944, #2882, #2982, .T. ) ; +#1952 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1953 = EDGE_CURVE ( 'NONE', #1239, #2295, #211, .T. ) ; +#1954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1955 = LINE ( 'NONE', #908, #120 ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #1849, .F. ) ; +#1957 = AXIS2_PLACEMENT_3D ( 'NONE', #1989, #2461, #857 ) ; +#1958 = LINE ( 'NONE', #1213, #732 ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 10.23409302307226400, -16.06791603974122800, 19.42069737434324100 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( -10.18849987700986400, -16.09658336160411800, 19.18813337315155800 ) ) ; +#1961 = CYLINDRICAL_SURFACE ( 'NONE', #2305, 2.499999999999999600 ) ; +#1962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1963 = VECTOR ( 'NONE', #1741, 1000.000000000000000 ) ; +#1964 = AXIS2_PLACEMENT_3D ( 'NONE', #1972, #2669, #1303 ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( -16.16188055304297700, -25.13390137926044700, 8.760605227908698100 ) ) ; +#1966 = CIRCLE ( 'NONE', #1680, 5.000000000000000900 ) ; +#1967 = CIRCLE ( 'NONE', #2601, 2.500000000000000000 ) ; +#1968 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1969 = CARTESIAN_POINT ( 'NONE', ( 14.62283818975376400, -12.21189381993462000, 24.42801066337678900 ) ) ; +#1970 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.821231995776175500E-016 ) ) ; +#1971 = VECTOR ( 'NONE', #2451, 1000.000000000000000 ) ; +#1972 = CARTESIAN_POINT ( 'NONE', ( -9.572860397327198900E-017, 2.499999999999999600, 32.39999999999995600 ) ) ; +#1973 = EDGE_CURVE ( 'NONE', #504, #505, #2361, .T. ) ; +#1974 = EDGE_CURVE ( 'NONE', #654, #1358, #588, .T. ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383500, 34.89999999999995600 ) ) ; +#1976 = ORIENTED_EDGE ( 'NONE', *, *, #2421, .F. ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -5.000000000000000900, 32.39999999999995600 ) ) ; +#1978 = AXIS2_PLACEMENT_3D ( 'NONE', #609, #2240, #851 ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -9.572860397327198900E-017, 149.9000000000000100 ) ) ; +#1980 = VERTEX_POINT ( 'NONE', #1811 ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( -9.833755150206350500, -23.81735762803154400, 17.33227288533856800 ) ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( 18.97716052439858500, -1.923826292652708500, 24.85458625471769900 ) ) ; +#1983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1984 = EDGE_LOOP ( 'NONE', ( #319, #2222, #472, #494 ) ) ; +#1985 = AXIS2_PLACEMENT_3D ( 'NONE', #584, #823, #2436 ) ; +#1986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1987 = VERTEX_POINT ( 'NONE', #663 ) ; +#1988 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 149.9000000000000100 ) ) ; +#1990 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1991 = VERTEX_POINT ( 'NONE', #2287 ) ; +#1992 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1993 = ORIENTED_EDGE ( 'NONE', *, *, #1973, .F. ) ; +#1994 = CARTESIAN_POINT ( 'NONE', ( 16.17403740940010300, 10.11074017197296000, 24.90368059037735500 ) ) ; +#1995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#1996 = ORIENTED_EDGE ( 'NONE', *, *, #1610, .F. ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -2.500000000000000000, 149.9000000000000100 ) ) ; +#1998 = VECTOR ( 'NONE', #2501, 1000.000000000000000 ) ; +#1999 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #1755, #379 ) ; +#2000 = PLANE ( 'NONE', #2927 ) ; +#2001 = LINE ( 'NONE', #37, #2480 ) ; +#2002 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .F. ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, -22.89999999999999900, -17.50000000000000400 ) ) ; +#2004 = VERTEX_POINT ( 'NONE', #2039 ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 4.999999999999999100, 149.9000000000000100 ) ) ; +#2006 = CIRCLE ( 'NONE', #1429, 2.500000000000000400 ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( 10.94596599370078800, 15.59419296264027800, 21.17391772246067200 ) ) ; +#2008 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2010 = FACE_OUTER_BOUND ( 'NONE', #402, .T. ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 17.08942073814194600, -24.28259689384528400, 9.599526219158557100 ) ) ; +#2012 = VERTEX_POINT ( 'NONE', #2520 ) ; +#2013 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #1843 ) ) ; +#2014 = CIRCLE ( 'NONE', #1871, 14.05000000000000800 ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, 17.49999999999999600 ) ) ; +#2016 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2018 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 149.9000000000000100 ) ) ; +#2019 = EDGE_CURVE ( 'NONE', #2457, #976, #1065, .T. ) ; +#2020 = EDGE_CURVE ( 'NONE', #150, #2387, #1744, .T. ) ; +#2021 = VERTEX_POINT ( 'NONE', #1135 ) ; +#2022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2024 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#2025 = AXIS2_PLACEMENT_3D ( 'NONE', #2400, #1018, #2632 ) ; +#2026 = DIRECTION ( 'NONE', ( -0.9014417425405915100, -0.4329004329004327900, -3.127504306021207400E-016 ) ) ; +#2027 = EDGE_LOOP ( 'NONE', ( #2932, #1725, #1829, #661 ) ) ; +#2028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907222500E-016 ) ) ; +#2029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2030 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881000E-017, 0.0000000000000000000 ) ) ; +#2031 = VERTEX_POINT ( 'NONE', #1596 ) ; +#2032 = AXIS2_PLACEMENT_3D ( 'NONE', #1798, #1345, #649 ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#2034 = PLANE ( 'NONE', #2032 ) ; +#2035 = ORIENTED_EDGE ( 'NONE', *, *, #2381, .T. ) ; +#2036 = PLANE ( 'NONE', #1173 ) ; +#2037 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ; +#2038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383300, -5.000000000000000900, 32.39999999999995600 ) ) ; +#2040 = CIRCLE ( 'NONE', #767, 2.500000000000000000 ) ; +#2041 = EDGE_LOOP ( 'NONE', ( #1738, #1647, #1056, #2384 ) ) ; +#2042 = EDGE_CURVE ( 'NONE', #1601, #477, #2300, .T. ) ; +#2043 = EDGE_CURVE ( 'NONE', #2251, #2513, #2229, .T. ) ; +#2044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2045 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2046 = CIRCLE ( 'NONE', #2963, 14.05000000000000600 ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 10.41165212634383500, 34.89999999999995600 ) ) ; +#2048 = AXIS2_PLACEMENT_3D ( 'NONE', #2366, #983, #2603 ) ; +#2049 = LINE ( 'NONE', #1055, #1493 ) ; +#2050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2052 = CYLINDRICAL_SURFACE ( 'NONE', #420, 12.50000000000000000 ) ; +#2053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2054 = LINE ( 'NONE', #1030, #2525 ) ; +#2055 = LINE ( 'NONE', #2455, #815 ) ; +#2056 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #1192, #280 ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2058 = FACE_OUTER_BOUND ( 'NONE', #1, .T. ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( 8.760616917277532800, 50.53389405542252900, 16.16189411702417200 ) ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, -23.09319927467733200, 17.49999999999999600 ) ) ; +#2061 = ORIENTED_EDGE ( 'NONE', *, *, #1610, .T. ) ; +#2062 = VERTEX_POINT ( 'NONE', #1380 ) ; +#2063 = EDGE_CURVE ( 'NONE', #505, #78, #1668, .T. ) ; +#2064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2065 = ORIENTED_EDGE ( 'NONE', *, *, #2751, .F. ) ; +#2066 = EDGE_LOOP ( 'NONE', ( #406, #435, #1709, #1136 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -19.04999999999999700, -17.50000000000000400 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.04999999999999700, 0.0000000000000000000 ) ) ; +#2069 = ORIENTED_EDGE ( 'NONE', *, *, #2580, .F. ) ; +#2070 = ORIENTED_EDGE ( 'NONE', *, *, #2279, .F. ) ; +#2071 = ADVANCED_FACE ( 'NONE', ( #381 ), #1534, .F. ) ; +#2072 = DIRECTION ( 'NONE', ( 0.9014417425405912800, -0.4329004329004329500, 0.0000000000000000000 ) ) ; +#2073 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ; +#2074 = CYLINDRICAL_SURFACE ( 'NONE', #677, 2.500000000000000400 ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 9.686739816770565200, -24.13539832442685600, 17.18055791241518500 ) ) ; +#2076 = ORIENTED_EDGE ( 'NONE', *, *, #818, .T. ) ; +#2077 = DIRECTION ( 'NONE', ( 0.9014417425405915100, -0.4329004329004327900, 0.0000000000000000000 ) ) ; +#2078 = LINE ( 'NONE', #1170, #2615 ) ; +#2079 = EDGE_CURVE ( 'NONE', #1980, #2012, #2759, .T. ) ; +#2080 = EDGE_CURVE ( 'NONE', #2937, #2576, #2148, .T. ) ; +#2081 = FACE_OUTER_BOUND ( 'NONE', #94, .T. ) ; +#2082 = AXIS2_PLACEMENT_3D ( 'NONE', #1791, #414, #2029 ) ; +#2083 = FACE_OUTER_BOUND ( 'NONE', #283, .T. ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 2.499999999999999600, 149.9000000000000100 ) ) ; +#2085 = ORIENTED_EDGE ( 'NONE', *, *, #483, .T. ) ; +#2086 = ADVANCED_FACE ( 'NONE', ( #2821 ), #301, .T. ) ; +#2087 = CIRCLE ( 'NONE', #1583, 19.05000000000000100 ) ; +#2088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2089 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #466, #2088 ) ; +#2090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2091 = EDGE_LOOP ( 'NONE', ( #294, #2567, #824, #265 ) ) ; +#2092 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383700, 149.9000000000000100 ) ) ; +#2093 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ; +#2094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2095 = ORIENTED_EDGE ( 'NONE', *, *, #2694, .T. ) ; +#2096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2097 = AXIS2_PLACEMENT_3D ( 'NONE', #2474, #1088, #2701 ) ; +#2098 = ADVANCED_FACE ( 'NONE', ( #924 ), #2768, .T. ) ; +#2099 = ORIENTED_EDGE ( 'NONE', *, *, #2651, .F. ) ; +#2100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2101 = VERTEX_POINT ( 'NONE', #2547 ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( -9.599530718962485700, 49.68258964482796400, 17.08942546705801000 ) ) ; +#2103 = ORIENTED_EDGE ( 'NONE', *, *, #1763, .T. ) ; +#2104 = CIRCLE ( 'NONE', #305, 2.499999999999998700 ) ; +#2105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2106 = ORIENTED_EDGE ( 'NONE', *, *, #2835, .F. ) ; +#2107 = VECTOR ( 'NONE', #1856, 1000.000000000000000 ) ; +#2108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2109 = CIRCLE ( 'NONE', #1383, 9.999999999999998200 ) ; +#2110 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2111 = ADVANCED_FACE ( 'NONE', ( #853 ), #7, .T. ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -25.39999999999999900, -2.478176394252583700E-015 ) ) ; +#2113 = EDGE_CURVE ( 'NONE', #835, #2710, #2687, .T. ) ; +#2114 = EDGE_CURVE ( 'NONE', #1050, #2806, #2078, .T. ) ; +#2115 = VECTOR ( 'NONE', #1491, 1000.000000000000000 ) ; +#2116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2117 = CIRCLE ( 'NONE', #602, 2.500000000000000400 ) ; +#2118 = CIRCLE ( 'NONE', #1516, 5.000000000000000000 ) ; +#2119 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #2320, #939 ) ; +#2120 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2121 = FACE_OUTER_BOUND ( 'NONE', #41, .T. ) ; +#2122 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2123 = EDGE_LOOP ( 'NONE', ( #2532, #1950, #755, #1410 ) ) ; +#2124 = AXIS2_PLACEMENT_3D ( 'NONE', #2456, #1071, #2679 ) ; +#2125 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2126 = ADVANCED_FACE ( 'NONE', ( #1396 ), #1624, .T. ) ; +#2127 = VERTEX_POINT ( 'NONE', #935 ) ; +#2128 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 50.79999999999999700, 17.50000000000000400 ) ) ; +#2129 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ; +#2130 = EDGE_CURVE ( 'NONE', #2966, #1812, #769, .T. ) ; +#2131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2132 = EDGE_CURVE ( 'NONE', #199, #1312, #239, .T. ) ; +#2133 = ORIENTED_EDGE ( 'NONE', *, *, #2173, .T. ) ; +#2134 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .T. ) ; +#2135 = AXIS2_PLACEMENT_3D ( 'NONE', #2691, #1323, #2921 ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( -17.08942546705802100, 49.68258964482796400, 9.599530718962494500 ) ) ; +#2137 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.829144158930881000E-017, 0.0000000000000000000 ) ) ; +#2138 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2139 = EDGE_LOOP ( 'NONE', ( #2319, #496, #603, #2426 ) ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #1821, .F. ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, 17.49999999999999600 ) ) ; +#2142 = ADVANCED_FACE ( 'NONE', ( #2554 ), #700, .F. ) ; +#2143 = AXIS2_PLACEMENT_3D ( 'NONE', #2919, #1541, #162 ) ; +#2144 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2145 = CYLINDRICAL_SURFACE ( 'NONE', #366, 7.500000000000000000 ) ; +#2146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2147 = EDGE_LOOP ( 'NONE', ( #2165, #2306, #1694 ) ) ; +#2148 = CIRCLE ( 'NONE', #1163, 2.499999999999998700 ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -25.39999999999999900, -17.50000000000000400 ) ) ; +#2150 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 16.21426840779442500, 17.99211085293907400 ) ) ; +#2152 = CIRCLE ( 'NONE', #2584, 2.500000000000000000 ) ; +#2153 = VECTOR ( 'NONE', #1022, 1000.000000000000000 ) ; +#2154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2155 = AXIS2_PLACEMENT_3D ( 'NONE', #2235, #845, #2462 ) ; +#2156 = VERTEX_POINT ( 'NONE', #717 ) ; +#2157 = FACE_OUTER_BOUND ( 'NONE', #1101, .T. ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2159 = ADVANCED_FACE ( 'NONE', ( #89 ), #1455, .F. ) ; +#2160 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( -12.60079221867527500, 14.29341469925312300, 23.19232292497576300 ) ) ; +#2162 = ORIENTED_EDGE ( 'NONE', *, *, #2171, .T. ) ; +#2163 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, 0.0000000000000000000 ) ) ; +#2164 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #1843 ), #2321 ) ; +#2165 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ; +#2166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2167 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080900, -12.66525648269531200, 34.89999999999995600 ) ) ; +#2168 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .T. ) ; +#2169 = CARTESIAN_POINT ( 'NONE', ( -17.52630694004406600, 7.527485033942799200, 25.01204176539554100 ) ) ; +#2170 = ORIENTED_EDGE ( 'NONE', *, *, #2329, .F. ) ; +#2171 = EDGE_CURVE ( 'NONE', #1900, #2837, #2001, .T. ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -19.04999999999999700, -17.50000000000000400 ) ) ; +#2173 = EDGE_CURVE ( 'NONE', #1868, #906, #1329, .T. ) ; +#2174 = ADVANCED_FACE ( 'NONE', ( #1920 ), #1643, .T. ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 32.39999999999995600 ) ) ; +#2176 = ORIENTED_EDGE ( 'NONE', *, *, #2969, .T. ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -25.39999999999999900, 17.49999999999999600 ) ) ; +#2178 = AXIS2_PLACEMENT_3D ( 'NONE', #1705, #335, #1942 ) ; +#2179 = EDGE_LOOP ( 'NONE', ( #2604, #2627, #1527, #2170 ) ) ; +#2180 = CYLINDRICAL_SURFACE ( 'NONE', #2372, 19.05000000000000100 ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( -18.46236446965563600, -4.793013123927728700, 24.94366239214502600 ) ) ; +#2182 = LINE ( 'NONE', #1816, #2107 ) ; +#2183 = PLANE ( 'NONE', #2789 ) ; +#2184 = AXIS2_PLACEMENT_3D ( 'NONE', #2272, #887, #1357 ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -5.000000000000000900, 152.4000000000000100 ) ) ; +#2186 = VECTOR ( 'NONE', #549, 1000.000000000000000 ) ; +#2187 = FACE_OUTER_BOUND ( 'NONE', #2623, .T. ) ; +#2188 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 4.999999999999999100, 149.9000000000000100 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( -13.21703213237554500, -13.72084364513280400, 23.65969185097494100 ) ) ; +#2190 = FACE_OUTER_BOUND ( 'NONE', #1552, .T. ) ; +#2191 = EDGE_CURVE ( 'NONE', #474, #1050, #630, .T. ) ; +#2192 = EDGE_CURVE ( 'NONE', #943, #115, #19, .T. ) ; +#2193 = CYLINDRICAL_SURFACE ( 'NONE', #909, 2.500000000000000000 ) ; +#2194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -23.09319927467733200, 10.00000000000000900 ) ) ; +#2196 = LINE ( 'NONE', #1979, #2591 ) ; +#2197 = AXIS2_PLACEMENT_3D ( 'NONE', #1904, #521, #2150 ) ; +#2198 = ORIENTED_EDGE ( 'NONE', *, *, #2242, .T. ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( 7.164502164502161800, -14.91886083904679000, 149.9000000000000100 ) ) ; +#2200 = ORIENTED_EDGE ( 'NONE', *, *, #1248, .T. ) ; +#2201 = CARTESIAN_POINT ( 'NONE', ( 10.72997610268161100, -15.74215971711084400, 20.76174131750418900 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 10.41165212634383700, 149.9000000000000100 ) ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( -10.05994903815679500, -16.17716641581684900, 18.47720443563740700 ) ) ; +#2204 = VERTEX_POINT ( 'NONE', #2889 ) ; +#2205 = AXIS2_PLACEMENT_3D ( 'NONE', #739, #2581, #2812 ) ; +#2206 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, -0.0000000000000000000 ) ) ; +#2207 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.982541115402066300E-016 ) ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -25.39999999999999900, 0.0000000000000000000 ) ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( -15.59462271190963600, -25.33284149808674400, 8.288886836155636900 ) ) ; +#2210 = ORIENTED_EDGE ( 'NONE', *, *, #123, .F. ) ; +#2211 = EDGE_LOOP ( 'NONE', ( #1197, #1306, #728 ) ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -23.09319927467732500, 17.49999999999999600 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 15.35430021065975500, -11.28616332741139200, 24.69207924142518700 ) ) ; +#2214 = VERTEX_POINT ( 'NONE', #591 ) ; +#2215 = DIRECTION ( 'NONE', ( 0.4329004329004324500, 0.9014417425405915100, 0.0000000000000000000 ) ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -9.023654377385077000E-016, 149.9000000000000100 ) ) ; +#2217 = ORIENTED_EDGE ( 'NONE', *, *, #1450, .T. ) ; +#2218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2219 = EDGE_CURVE ( 'NONE', #117, #1239, #1247, .T. ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000000000900, 149.9000000000000100 ) ) ; +#2221 = PRESENTATION_STYLE_ASSIGNMENT (( #1398 ) ) ; +#2222 = ORIENTED_EDGE ( 'NONE', *, *, #2715, .T. ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( -6.082251082251082700, 12.66525648269531400, 32.39999999999995600 ) ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( -9.599526219158557100, -24.28259689384528400, 17.08942073814193900 ) ) ; +#2225 = CYLINDRICAL_SURFACE ( 'NONE', #56, 2.500000000000000400 ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 19.04989891402420800, 0.4875992130404268000, 24.83810693346001100 ) ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -10.41165212634383300, 32.39999999999995600 ) ) ; +#2228 = PLANE ( 'NONE', #2743 ) ; +#2229 = LINE ( 'NONE', #913, #1607 ) ; +#2230 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1275, #803, #349, #1959, #571, #2201, #811, #2427, #1043, #2657, #1287, #2885, #1508, #132, #1735, #358, #1969, #586, #2213, #825, #2438, #1057, #2666, #1300, #2895, #1520, #144, #1747, #371, #1982, #599, #2226, #837, #2454, #1069, #2677, #1310, #2908, #1532, #152, #1759, #384, #1994, #608, #2239, #850, #2466, #1081, #2690, #1322, #2920, #1543, #164, #1771, #393, #2007, #620, #2249, #863, #2477, #1091, #2703, #1332, #2933, #1554, #178 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.469446951953614200E-018, 0.001454737090578917800, 0.002909474181157832200, 0.004364211271736746600, 0.005818948362315661000, 0.007273685452894576200, 0.008728422543473489700, 0.009455791088762948200, 0.01018315963405240700, 0.01163789672463132200, 0.01309263381521023200, 0.01454737090578914000, 0.01745684508694694800, 0.01891158217752585800, 0.02036631926810476500, 0.02327579344926258100, 0.02473053053984149200, 0.02618526763042040200, 0.02909474181157821500, 0.03054947890215712500, 0.03200421599273603500, 0.03491369017389385500, 0.03636842726447275800, 0.03782316435505166100, 0.03855053290034112000, 0.03927790144563057800, 0.04073263853620948100, 0.04218737562678839800, 0.04364211271736730100, 0.04436948126265676000, 0.04509684980794620400, 0.04582421835323566300, 0.04655158689852510700 ), + .UNSPECIFIED. ) ; +#2231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2232 = FILL_AREA_STYLE ('',( #844 ) ) ; +#2233 = FACE_OUTER_BOUND ( 'NONE', #2918, .T. ) ; +#2234 = AXIS2_PLACEMENT_3D ( 'NONE', #1335, #2938, #1558 ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2236 = VERTEX_POINT ( 'NONE', #1062 ) ; +#2237 = CYLINDRICAL_SURFACE ( 'NONE', #1159, 2.500000000000000000 ) ; +#2238 = VERTEX_POINT ( 'NONE', #1292 ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( 15.05773643994833800, 11.67858135279447600, 24.59843928715265800 ) ) ; +#2240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2241 = CIRCLE ( 'NONE', #2860, 2.500000000000000000 ) ; +#2242 = EDGE_CURVE ( 'NONE', #2238, #2259, #2393, .T. ) ; +#2243 = EDGE_CURVE ( 'NONE', #2457, #1807, #1782, .T. ) ; +#2244 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2246 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -5.000000000000000900, 34.89999999999995600 ) ) ; +#2247 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .F. ) ; +#2248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( 10.46403693321967200, 15.91910602665805300, 20.10793752027292300 ) ) ; +#2250 = DIRECTION ( 'NONE', ( 4.956352788505162200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2251 = VERTEX_POINT ( 'NONE', #376 ) ; +#2252 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 2.499999999999999600, 34.89999999999995600 ) ) ; +#2253 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( 16.77970220944726500, -24.66292844031368500, 9.310616879071890400 ) ) ; +#2255 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2256 = EDGE_LOOP ( 'NONE', ( #1826, #2470, #2504, #1379 ) ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, -25.39999999999999900, -17.50000000000000400 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, 50.79999999999999700, -17.50000000000000400 ) ) ; +#2259 = VERTEX_POINT ( 'NONE', #2902 ) ; +#2260 = EDGE_CURVE ( 'NONE', #2383, #356, #545, .T. ) ; +#2261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2262 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -29.05000000000000400, 0.0000000000000000000 ) ) ; +#2264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2265 = FACE_OUTER_BOUND ( 'NONE', #2517, .T. ) ; +#2266 = AXIS2_PLACEMENT_3D ( 'NONE', #2015, #175, #1551 ) ; +#2267 = LINE ( 'NONE', #428, #1574 ) ; +#2268 = VECTOR ( 'NONE', #1013, 1000.000000000000000 ) ; +#2269 = DIRECTION ( 'NONE', ( -1.982541115402064400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2270 = CIRCLE ( 'NONE', #2025, 9.999999999999998200 ) ; +#2271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383500, 34.89999999999995600 ) ) ; +#2273 = FACE_OUTER_BOUND ( 'NONE', #1083, .T. ) ; +#2274 = FACE_OUTER_BOUND ( 'NONE', #2745, .T. ) ; +#2275 = CIRCLE ( 'NONE', #88, 2.500000000000002200 ) ; +#2276 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 50.79999999999999700, 7.817541634481465000 ) ) ; +#2278 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -25.39999999999999900, -17.50000000000000400 ) ) ; +#2279 = EDGE_CURVE ( 'NONE', #2101, #1773, #1845, .T. ) ; +#2280 = EDGE_CURVE ( 'NONE', #2356, #2062, #833, .T. ) ; +#2281 = VERTEX_POINT ( 'NONE', #183 ) ; +#2282 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, -22.89999999999999900, -17.50000000000000400 ) ) ; +#2283 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2284 = ORIENTED_EDGE ( 'NONE', *, *, #973, .T. ) ; +#2285 = AXIS2_PLACEMENT_3D ( 'NONE', #2471, #1085, #1526 ) ; +#2286 = ORIENTED_EDGE ( 'NONE', *, *, #2113, .T. ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383500, 5.000000000000000000, 32.39999999999995600 ) ) ; +#2288 = VERTEX_POINT ( 'NONE', #2926 ) ; +#2289 = AXIS2_PLACEMENT_3D ( 'NONE', #2897, #2367, #1749 ) ; +#2290 = DIRECTION ( 'NONE', ( 4.956352788505161500E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2291 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .T. ) ; +#2292 = ORIENTED_EDGE ( 'NONE', *, *, #2880, .T. ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.39999999999999900, -7.434529182757741500E-016 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2295 = VERTEX_POINT ( 'NONE', #1784 ) ; +#2296 = EDGE_CURVE ( 'NONE', #356, #757, #1701, .T. ) ; +#2297 = EDGE_CURVE ( 'NONE', #747, #2156, #1175, .T. ) ; +#2298 = FACE_OUTER_BOUND ( 'NONE', #1650, .T. ) ; +#2299 = AXIS2_PLACEMENT_3D ( 'NONE', #1772, #394, #2008 ) ; +#2300 = CIRCLE ( 'NONE', #695, 2.500000000000000000 ) ; +#2301 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2302 = ADVANCED_FACE ( 'NONE', ( #1634 ), #2495, .T. ) ; +#2303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2304 = VECTOR ( 'NONE', #2375, 1000.000000000000000 ) ; +#2305 = AXIS2_PLACEMENT_3D ( 'NONE', #1519, #607, #1746 ) ; +#2306 = ORIENTED_EDGE ( 'NONE', *, *, #1696, .T. ) ; +#2307 = LINE ( 'NONE', #185, #1078 ) ; +#2308 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 9.411941210245062800, -24.54533984291375900, 16.88947346982400400 ) ) ; +#2310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2311 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ; +#2312 = AXIS2_PLACEMENT_3D ( 'NONE', #1077, #1317, #604 ) ; +#2313 = ADVANCED_FACE ( 'NONE', ( #2858 ), #2034, .F. ) ; +#2314 = VERTEX_POINT ( 'NONE', #876 ) ; +#2315 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 152.4000000000000100 ) ) ; +#2317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2318 = EDGE_LOOP ( 'NONE', ( #789, #929, #2720, #912, #458, #1626, #438, #1157, #1734, #1769, #1262, #1324, #194, #1382, #2106, #1522 ) ) ; +#2319 = ORIENTED_EDGE ( 'NONE', *, *, #1910, .T. ) ; +#2320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2321 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #506 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #13, #1619, #248 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#2322 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 9.310624109301242500, 50.06292039916419900, 16.77971008993673200 ) ) ; +#2324 = VERTEX_POINT ( 'NONE', #1125 ) ; +#2325 = CIRCLE ( 'NONE', #1606, 14.05000000000000600 ) ; +#2326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2327 = ADVANCED_FACE ( 'NONE', ( #415 ), #1021, .F. ) ; +#2328 = VECTOR ( 'NONE', #1988, 1000.000000000000000 ) ; +#2329 = EDGE_CURVE ( 'NONE', #2613, #1896, #2944, .T. ) ; +#2330 = EDGE_CURVE ( 'NONE', #2576, #2613, #2267, .T. ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000002700, -19.04999999999999700, 0.0000000000000000000 ) ) ; +#2332 = FACE_OUTER_BOUND ( 'NONE', #1630, .T. ) ; +#2333 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #2411, #1027 ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, 9.999999999999996400 ) ) ; +#2335 = CIRCLE ( 'NONE', #1563, 2.500000000000000400 ) ; +#2336 = CARTESIAN_POINT ( 'NONE', ( -9.833757152386361600, 49.21735224922267800, 17.33227492390912200 ) ) ; +#2337 = VERTEX_POINT ( 'NONE', #1808 ) ; +#2338 = CYLINDRICAL_SURFACE ( 'NONE', #281, 2.500000000000000400 ) ; +#2339 = AXIS2_PLACEMENT_3D ( 'NONE', #264, #1863, #490 ) ; +#2340 = FACE_OUTER_BOUND ( 'NONE', #1559, .T. ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -5.000000000000000900, 149.9000000000000100 ) ) ; +#2342 = ADVANCED_FACE ( 'NONE', ( #341 ), #957, .T. ) ; +#2343 = ORIENTED_EDGE ( 'NONE', *, *, #513, .T. ) ; +#2344 = EDGE_CURVE ( 'NONE', #920, #256, #1381, .T. ) ; +#2345 = EDGE_CURVE ( 'NONE', #531, #764, #2182, .T. ) ; +#2346 = ORIENTED_EDGE ( 'NONE', *, *, #1973, .T. ) ; +#2347 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2348 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ; +#2349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2350 = AXIS2_PLACEMENT_3D ( 'NONE', #791, #2408, #1023 ) ; +#2351 = EDGE_LOOP ( 'NONE', ( #236, #2718, #910, #1846 ) ) ; +#2352 = ORIENTED_EDGE ( 'NONE', *, *, #644, .F. ) ; +#2353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2354 = ADVANCED_FACE ( 'NONE', ( #1489 ), #2790, .F. ) ; +#2355 = AXIS2_PLACEMENT_3D ( 'NONE', #980, #2600, #1219 ) ; +#2356 = VERTEX_POINT ( 'NONE', #2334 ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, -22.89999999999999900, 2.973811673103096200E-015 ) ) ; +#2358 = ORIENTED_EDGE ( 'NONE', *, *, #1644, .T. ) ; +#2359 = FACE_OUTER_BOUND ( 'NONE', #2676, .T. ) ; +#2360 = DIRECTION ( 'NONE', ( 1.040834085586084500E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2361 = LINE ( 'NONE', #2508, #1146 ) ; +#2362 = EDGE_CURVE ( 'NONE', #847, #2723, #890, .T. ) ; +#2363 = ADVANCED_FACE ( 'NONE', ( #2727 ), #2973, .T. ) ; +#2364 = FACE_OUTER_BOUND ( 'NONE', #688, .T. ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( -17.33227492390911800, 49.21735224922265700, 9.833757152386363400 ) ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -10.41165212634383300, 34.89999999999995600 ) ) ; +#2367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2368 = ORIENTED_EDGE ( 'NONE', *, *, #2836, .F. ) ; +#2369 = FACE_OUTER_BOUND ( 'NONE', #1931, .T. ) ; +#2370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2371 = ORIENTED_EDGE ( 'NONE', *, *, #1821, .T. ) ; +#2372 = AXIS2_PLACEMENT_3D ( 'NONE', #1084, #2244, #1326 ) ; +#2373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2374 = ORIENTED_EDGE ( 'NONE', *, *, #1644, .F. ) ; +#2375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2376 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531100, -6.082251082251083600, 32.39999999999995600 ) ) ; +#2377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2378 = EDGE_LOOP ( 'NONE', ( #111, #686, #806, #1446 ) ) ; +#2379 = EDGE_CURVE ( 'NONE', #78, #1841, #269, .T. ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 50.79999999999999700, 0.0000000000000000000 ) ) ; +#2381 = EDGE_CURVE ( 'NONE', #2259, #2744, #2046, .T. ) ; +#2382 = ADVANCED_FACE ( 'NONE', ( #1427 ), #42, .T. ) ; +#2383 = VERTEX_POINT ( 'NONE', #1649 ) ; +#2384 = ORIENTED_EDGE ( 'NONE', *, *, #1138, .T. ) ; +#2385 = AXIS2_PLACEMENT_3D ( 'NONE', #964, #2577, #1198 ) ; +#2386 = CARTESIAN_POINT ( 'NONE', ( -13.53790042059384800, 13.41030392412016600, 23.87812695100989700 ) ) ; +#2387 = VERTEX_POINT ( 'NONE', #2585 ) ; +#2388 = ORIENTED_EDGE ( 'NONE', *, *, #1803, .F. ) ; +#2389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2390 = AXIS2_PLACEMENT_3D ( 'NONE', #1413, #31, #1633 ) ; +#2391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2392 = LINE ( 'NONE', #2901, #1172 ) ; +#2393 = CIRCLE ( 'NONE', #946, 2.499999999999999100 ) ; +#2394 = ADVANCED_FACE ( 'NONE', ( #2578 ), #207, .T. ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 16.16189411702418600, 50.53389405542253600, 8.760616917277523900 ) ) ; +#2396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.156482317317871500E-016 ) ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( -18.31933985120619800, 5.247705647175822100, 24.95653292414752400 ) ) ; +#2398 = FACE_OUTER_BOUND ( 'NONE', #1142, .T. ) ; +#2399 = EDGE_CURVE ( 'NONE', #710, #1809, #807, .T. ) ; +#2400 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -25.39999999999999900, 17.50000000000000400 ) ) ; +#2401 = CYLINDRICAL_SURFACE ( 'NONE', #473, 2.500000000000000000 ) ; +#2402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2403 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #2026, #642 ) ; +#2404 = ORIENTED_EDGE ( 'NONE', *, *, #2580, .T. ) ; +#2405 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ; +#2406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2407 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, 50.79999999999999700, 0.0000000000000000000 ) ) ; +#2408 = DIRECTION ( 'NONE', ( -0.9014417425405915100, -0.4329004329004327900, 3.127504306021207400E-016 ) ) ; +#2409 = CIRCLE ( 'NONE', #2769, 5.000000000000000000 ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( -17.86634451014846500, -6.628172800641205100, 24.99322805813224900 ) ) ; +#2411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 6.938893903907222500E-016 ) ) ; +#2412 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .F. ) ; +#2413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2414 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.39999999999999900, -2.836047814137364000E-021 ) ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383300, 149.9000000000000100 ) ) ; +#2417 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2418 = VERTEX_POINT ( 'NONE', #1202 ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( -12.59208733929280700, -14.30107305827486800, 23.18484246966967900 ) ) ; +#2420 = ORIENTED_EDGE ( 'NONE', *, *, #2279, .T. ) ; +#2421 = EDGE_CURVE ( 'NONE', #1987, #2356, #126, .T. ) ; +#2422 = EDGE_CURVE ( 'NONE', #286, #2673, #1958, .T. ) ; +#2423 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .F. ) ; +#2424 = DIRECTION ( 'NONE', ( 0.4329004329004327900, -0.9014417425405915100, 0.0000000000000000000 ) ) ; +#2425 = AXIS2_PLACEMENT_3D ( 'NONE', #1182, #2787, #1415 ) ; +#2426 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .T. ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 11.43983591665007200, -15.23569074353777000, 21.94228315458762800 ) ) ; +#2428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2429 = VERTEX_POINT ( 'NONE', #3 ) ; +#2430 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000200, -16.21426840779448900, 17.74617002144970000 ) ) ; +#2431 = ORIENTED_EDGE ( 'NONE', *, *, #275, .F. ) ; +#2432 = LINE ( 'NONE', #985, #1818 ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -9.572860397327206300E-017, 149.9000000000000100 ) ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( -15.15002851521658100, -25.40000000000000200, 7.933790589234991600 ) ) ; +#2435 = LINE ( 'NONE', #1340, #1212 ) ; +#2436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2437 = PRESENTATION_STYLE_ASSIGNMENT (( #1536 ) ) ; +#2438 = CARTESIAN_POINT ( 'NONE', ( 16.16483403001488000, -10.09143637022954300, 24.88441601490228200 ) ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 10.41165212634383300, 34.89999999999995600 ) ) ; +#2440 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2441 = CIRCLE ( 'NONE', #1999, 2.500000000000000000 ) ; +#2442 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #2763, 'distance_accuracy_value', 'NONE'); +#2443 = EDGE_CURVE ( 'NONE', #2238, #943, #1365, .T. ) ; +#2444 = EDGE_CURVE ( 'NONE', #1980, #583, #1878, .T. ) ; +#2445 = FACE_OUTER_BOUND ( 'NONE', #1483, .T. ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#2447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2448 = EDGE_LOOP ( 'NONE', ( #802, #229, #251, #2140 ) ) ; +#2449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2450 = VECTOR ( 'NONE', #2688, 1000.000000000000000 ) ; +#2451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2452 = CARTESIAN_POINT ( 'NONE', ( -9.310616879071890400, -24.66292844031368100, 16.77970220944726500 ) ) ; +#2453 = ORIENTED_EDGE ( 'NONE', *, *, #2296, .T. ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 18.95667824152046100, 1.945249664365889400, 24.85727792112186000 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 48.29999999999999700, -17.50000000000000400 ) ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 34.89999999999995600 ) ) ; +#2457 = VERTEX_POINT ( 'NONE', #1895 ) ; +#2458 = AXIS2_PLACEMENT_3D ( 'NONE', #2931, #1090, #392 ) ; +#2459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2460 = DIRECTION ( 'NONE', ( -0.4329004329004330100, 0.9014417425405912800, 0.0000000000000000000 ) ) ; +#2461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2463 = EDGE_LOOP ( 'NONE', ( #1625, #1653, #2952 ) ) ; +#2464 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #2019, .T. ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 14.15569477176369700, 12.75632844258081600, 24.22254055695532000 ) ) ; +#2467 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -10.41165212634383200, 32.39999999999995600 ) ) ; +#2468 = ORIENTED_EDGE ( 'NONE', *, *, #2130, .F. ) ; +#2469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2470 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#2471 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -47.20000000000003100, 17.49999999999999600 ) ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 16.21426840779441400, 17.49999999999999600 ) ) ; +#2473 = VERTEX_POINT ( 'NONE', #1667 ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 10.41165212634383700, 34.89999999999995600 ) ) ; +#2476 = LINE ( 'NONE', #1728, #1842 ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 10.24620306570663800, 16.06002810544423200, 19.42090066665321000 ) ) ; +#2478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2479 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 149.9000000000000100 ) ) ; +#2480 = VECTOR ( 'NONE', #1421, 1000.000000000000000 ) ; +#2481 = CLOSED_SHELL ( 'NONE', ( #325, #2126, #307, #1432, #2802, #2313, #2302, #2788, #692, #1922, #1844, #2174, #69, #2098, #1407, #86, #2813, #1623, #524, #1420, #1165, #1470, #2583, #2546, #922, #1384, #2363, #2071, #2533, #1253, #1691, #253, #2560, #12, #2111, #2382, #759, #2142, #510, #230, #1885, #704, #2612, #488, #2747, #282, #242, #1902, #715, #540, #1652, #1614, #293, #29, #2842, #965, #2990, #1664, #2327, #2159, #1193, #450, #975, #2772, #1679, #2569, #98, #2354, #1394, #990, #1858, #2626, #731, #2762, #1443, #1179, #1001, #40, #1151, #745, #475, #1237, #268, #1603, #54, #934, #1457, #2342, #678, #1209, #2086, #2825, #1637, #2394, #498, #462, #1220, #948, #777, #1872, #1833, #2597 ) ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( 16.16188055304298400, -25.13390137926044700, 8.760605227908691000 ) ) ; +#2483 = CYLINDRICAL_SURFACE ( 'NONE', #2522, 2.500000000000000400 ) ; +#2484 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( 1.660626566349216200E-032, -4.336808689942017700E-016, 149.9000000000000100 ) ) ; +#2486 = CYLINDRICAL_SURFACE ( 'NONE', #174, 2.500000000000000400 ) ; +#2487 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2488 = ORIENTED_EDGE ( 'NONE', *, *, #1611, .T. ) ; +#2489 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -25.39999999999999900, 2.478176394252581600E-016 ) ) ; +#2490 = LINE ( 'NONE', #761, #781 ) ; +#2491 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2492 = EDGE_CURVE ( 'NONE', #2127, #1898, #2432, .T. ) ; +#2493 = EDGE_CURVE ( 'NONE', #2314, #1905, #1286, .T. ) ; +#2494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2495 = PLANE ( 'NONE', #1707 ) ; +#2496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 32.39999999999995600 ) ) ; +#2498 = ORIENTED_EDGE ( 'NONE', *, *, #123, .T. ) ; +#2499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2500 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ; +#2501 = DIRECTION ( 'NONE', ( -1.982541115402064400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2502 = AXIS2_PLACEMENT_3D ( 'NONE', #899, #2515, #1367 ) ; +#2503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2504 = ORIENTED_EDGE ( 'NONE', *, *, #2344, .F. ) ; +#2505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2506 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976806900E-015, -22.89999999999999900, 14.99999999999999800 ) ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 101.5999999999999900, 0.0000000000000000000 ) ) ; +#2509 = ORIENTED_EDGE ( 'NONE', *, *, #2785, .F. ) ; +#2510 = EDGE_CURVE ( 'NONE', #2156, #286, #1891, .T. ) ; +#2511 = EDGE_CURVE ( 'NONE', #654, #431, #1210, .T. ) ; +#2512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2513 = VERTEX_POINT ( 'NONE', #2887 ) ; +#2514 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2516 = CIRCLE ( 'NONE', #930, 7.500000000000000000 ) ; +#2517 = EDGE_LOOP ( 'NONE', ( #2537, #1475, #1448 ) ) ; +#2518 = VECTOR ( 'NONE', #2593, 1000.000000000000000 ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2521 = CYLINDRICAL_SURFACE ( 'NONE', #2760, 2.500000000000000400 ) ; +#2522 = AXIS2_PLACEMENT_3D ( 'NONE', #2357, #287, #57 ) ; +#2523 = CIRCLE ( 'NONE', #1034, 2.500000000000002200 ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 7.164502164502160000, 14.91886083904679000, 152.4000000000000100 ) ) ; +#2525 = VECTOR ( 'NONE', #2870, 1000.000000000000000 ) ; +#2526 = FACE_OUTER_BOUND ( 'NONE', #1438, .T. ) ; +#2527 = DIRECTION ( 'NONE', ( 0.9014417425405915100, -0.4329004329004327900, -2.473082623391930100E-017 ) ) ; +#2528 = EDGE_LOOP ( 'NONE', ( #997, #2780, #974, #927 ) ) ; +#2529 = LINE ( 'NONE', #1320, #1302 ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2531 = EDGE_CURVE ( 'NONE', #477, #1388, #50, .T. ) ; +#2532 = ORIENTED_EDGE ( 'NONE', *, *, #1117, .F. ) ; +#2533 = ADVANCED_FACE ( 'NONE', ( #585 ), #1289, .T. ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -22.89999999999999900, 17.50000000000000400 ) ) ; +#2535 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#2536 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -22.89999999999999900, 17.49999999999999600 ) ) ; +#2537 = ORIENTED_EDGE ( 'NONE', *, *, #1804, .T. ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 4.999999999999999100, 32.39999999999995600 ) ) ; +#2539 = ORIENTED_EDGE ( 'NONE', *, *, #2836, .T. ) ; +#2540 = AXIS2_PLACEMENT_3D ( 'NONE', #1344, #2494, #2022 ) ; +#2541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2542 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ; +#2543 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1040, #2195, #568, #2653, #1282, #2881, #1504, #128, #1731, #355, #1965, #580, #2209, #821, #2434, #1052 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005693863809462888000, 0.001138772761892577600, 0.001708159142838866500, 0.002277545523785155200, 0.003416318285677735600, 0.003985704666624029100, 0.004555091047570321600 ), + .UNSPECIFIED. ) ; +#2544 = ORIENTED_EDGE ( 'NONE', *, *, #2019, .F. ) ; +#2545 = CARTESIAN_POINT ( 'NONE', ( 8.988496734622156500, -24.97967966108459900, 16.42336188904445700 ) ) ; +#2546 = ADVANCED_FACE ( 'NONE', ( #1740 ), #507, .F. ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383200, -2.500000000000000000, 34.89999999999995600 ) ) ; +#2548 = ORIENTED_EDGE ( 'NONE', *, *, #1267, .F. ) ; +#2549 = EDGE_CURVE ( 'NONE', #1773, #431, #1143, .T. ) ; +#2550 = EDGE_CURVE ( 'NONE', #150, #2356, #2981, .T. ) ; +#2551 = VECTOR ( 'NONE', #816, 1000.000000000000000 ) ; +#2552 = FILL_AREA_STYLE_COLOUR ( '', #2815 ) ; +#2553 = AXIS2_PLACEMENT_3D ( 'NONE', #1104, #645, #2269 ) ; +#2554 = FACE_OUTER_BOUND ( 'NONE', #2798, .T. ) ; +#2555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 8.673617379884035500E-016, 0.0000000000000000000 ) ) ; +#2556 = CIRCLE ( 'NONE', #1727, 7.500000000000000000 ) ; +#2557 = VECTOR ( 'NONE', #882, 1000.000000000000000 ) ; +#2558 = AXIS2_PLACEMENT_3D ( 'NONE', #250, #476, #2094 ) ; +#2559 = ORIENTED_EDGE ( 'NONE', *, *, #2362, .T. ) ; +#2560 = ADVANCED_FACE ( 'NONE', ( #2359 ), #2228, .T. ) ; +#2561 = CIRCLE ( 'NONE', #2197, 2.500000000000000400 ) ; +#2562 = CARTESIAN_POINT ( 'NONE', ( 9.599530718962492800, 49.68258964482797100, 17.08942546705801000 ) ) ; +#2563 = EDGE_CURVE ( 'NONE', #1358, #1271, #1666, .T. ) ; +#2564 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .T. ) ; +#2565 = AXIS2_PLACEMENT_3D ( 'NONE', #859, #1330, #2930 ) ; +#2566 = ORIENTED_EDGE ( 'NONE', *, *, #820, .T. ) ; +#2567 = ORIENTED_EDGE ( 'NONE', *, *, #2715, .F. ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( -9.977845322659398200, 48.68044691650689500, 17.47792825948262800 ) ) ; +#2569 = ADVANCED_FACE ( 'NONE', ( #1063 ), #2225, .F. ) ; +#2570 = ORIENTED_EDGE ( 'NONE', *, *, #2595, .F. ) ; +#2571 = EDGE_LOOP ( 'NONE', ( #1442, #1892, #2217 ) ) ; +#2572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2573 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -22.89999999999999900, 17.50000000000000400 ) ) ; +#2574 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ; +#2575 = LINE ( 'NONE', #1796, #1363 ) ; +#2576 = VERTEX_POINT ( 'NONE', #166 ) ; +#2577 = DIRECTION ( 'NONE', ( -0.9014417425405915100, -0.4329004329004327900, 0.0000000000000000000 ) ) ; +#2578 = FACE_OUTER_BOUND ( 'NONE', #2640, .T. ) ; +#2579 = EDGE_CURVE ( 'NONE', #145, #2214, #2894, .T. ) ; +#2580 = EDGE_CURVE ( 'NONE', #499, #2251, #2818, .T. ) ; +#2581 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 4.956352788505162200E-017 ) ) ; +#2582 = CIRCLE ( 'NONE', #1828, 2.500000000000000400 ) ; +#2583 = ADVANCED_FACE ( 'NONE', ( #2298 ), #2145, .F. ) ; +#2584 = AXIS2_PLACEMENT_3D ( 'NONE', #1635, #263, #1861 ) ; +#2585 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -16.21426840779441400, 17.49999999999998900 ) ) ; +#2586 = FACE_OUTER_BOUND ( 'NONE', #1984, .T. ) ; +#2587 = FACE_OUTER_BOUND ( 'NONE', #665, .T. ) ; +#2588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2589 = CIRCLE ( 'NONE', #2135, 2.500000000000002200 ) ; +#2590 = AXIS2_PLACEMENT_3D ( 'NONE', #894, #2512, #1867 ) ; +#2591 = VECTOR ( 'NONE', #2904, 1000.000000000000000 ) ; +#2592 = PLANE ( 'NONE', #2205 ) ; +#2593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2594 = EDGE_LOOP ( 'NONE', ( #2284, #554, #2352, #528 ) ) ; +#2595 = EDGE_CURVE ( 'NONE', #1905, #117, #2757, .T. ) ; +#2596 = EDGE_CURVE ( 'NONE', #1868, #267, #984, .T. ) ; +#2597 = ADVANCED_FACE ( 'NONE', ( #300 ), #2074, .T. ) ; +#2598 = ORIENTED_EDGE ( 'NONE', *, *, #937, .T. ) ; +#2599 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .T. ) ; +#2600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2601 = AXIS2_PLACEMENT_3D ( 'NONE', #1105, #2716, #1342 ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( -17.47792825948262400, 48.68044691650691600, 9.977845322659401700 ) ) ; +#2603 = DIRECTION ( 'NONE', ( -0.4329004329004335100, -0.9014417425405909500, 0.0000000000000000000 ) ) ; +#2604 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .F. ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 4.999999999999999100, 149.9000000000000100 ) ) ; +#2606 = ORIENTED_EDGE ( 'NONE', *, *, #2114, .T. ) ; +#2607 = DIRECTION ( 'NONE', ( 3.829144158930879800E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383700, 149.9000000000000100 ) ) ; +#2609 = EDGE_LOOP ( 'NONE', ( #1593, #1116, #502 ) ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 10.41165212634383700, 32.39999999999995600 ) ) ; +#2611 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ; +#2612 = ADVANCED_FACE ( 'NONE', ( #921 ), #849, .F. ) ; +#2613 = VERTEX_POINT ( 'NONE', #1794 ) ; +#2614 = CYLINDRICAL_SURFACE ( 'NONE', #979, 2.500000000000000400 ) ; +#2615 = VECTOR ( 'NONE', #2317, 1000.000000000000000 ) ; +#2616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2617 = AXIS2_PLACEMENT_3D ( 'NONE', #1977, #1064, #1990 ) ; +#2618 = LINE ( 'NONE', #968, #1397 ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2620 = LINE ( 'NONE', #2959, #2557 ) ; +#2621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2622 = CARTESIAN_POINT ( 'NONE', ( -14.16469092927481900, 12.74041626356049400, 24.21970664180273800 ) ) ; +#2623 = EDGE_LOOP ( 'NONE', ( #1098, #2929, #1555, #2346 ) ) ; +#2624 = CIRCLE ( 'NONE', #1126, 5.000000000000000000 ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 9.572860397327202600E-017, 2.499999999999999600, 32.39999999999995600 ) ) ; +#2626 = ADVANCED_FACE ( 'NONE', ( #238 ), #2614, .F. ) ; +#2627 = ORIENTED_EDGE ( 'NONE', *, *, #624, .T. ) ; +#2628 = CARTESIAN_POINT ( 'NONE', ( 16.77971008993674600, 50.06292039916419200, 9.310624109301235400 ) ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( -18.66734550437434200, 3.830028868865596300, 24.90942743840532700 ) ) ; +#2630 = ORIENTED_EDGE ( 'NONE', *, *, #987, .F. ) ; +#2631 = EDGE_CURVE ( 'NONE', #2295, #943, #1452, .T. ) ; +#2632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2633 = EDGE_CURVE ( 'NONE', #1174, #706, #377, .T. ) ; +#2634 = ORIENTED_EDGE ( 'NONE', *, *, #2900, .F. ) ; +#2635 = ORIENTED_EDGE ( 'NONE', *, *, #2969, .F. ) ; +#2636 = AXIS2_PLACEMENT_3D ( 'NONE', #1502, #127, #1730 ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -2.422236610476577200E-016, 149.9000000000000100 ) ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( -17.30605432809585100, -7.977316536512535800, 25.00055084011790300 ) ) ; +#2639 = EDGE_LOOP ( 'NONE', ( #44, #1168, #2544, #1132 ) ) ; +#2640 = EDGE_LOOP ( 'NONE', ( #1010, #492, #1695, #570 ) ) ; +#2641 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2642 = AXIS2_PLACEMENT_3D ( 'NONE', #2739, #2100, #949 ) ; +#2643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2644 = SPHERICAL_SURFACE ( 'NONE', #461, 2.500000000000000000 ) ; +#2645 = ORIENTED_EDGE ( 'NONE', *, *, #2243, .T. ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 4.999999999999999100, 152.4000000000000100 ) ) ; +#2647 = VECTOR ( 'NONE', #961, 1000.000000000000000 ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( -11.70970848820860300, -15.03077515597423500, 22.28580798483602600 ) ) ; +#2649 = SPHERICAL_SURFACE ( 'NONE', #2458, 2.500000000000000000 ) ; +#2650 = EDGE_CURVE ( 'NONE', #474, #2021, #2683, .T. ) ; +#2651 = EDGE_CURVE ( 'NONE', #477, #2383, #448, .T. ) ; +#2652 = LINE ( 'NONE', #2433, #810 ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( -17.39391438536099300, -23.64434042829266500, 9.894540175320756200 ) ) ; +#2654 = AXIS2_PLACEMENT_3D ( 'NONE', #1675, #2137, #71 ) ; +#2655 = LINE ( 'NONE', #2838, #1431 ) ; +#2656 = LINE ( 'NONE', #165, #741 ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 12.29113253801920900, -14.55917732507657700, 22.91286038244453800 ) ) ; +#2658 = VECTOR ( 'NONE', #1799, 1000.000000000000000 ) ; +#2659 = AXIS2_PLACEMENT_3D ( 'NONE', #2158, #306, #1901 ) ; +#2660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2661 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2662 = ORIENTED_EDGE ( 'NONE', *, *, #2173, .F. ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -22.89999999999999900, 10.00000000000000500 ) ) ; +#2664 = ORIENTED_EDGE ( 'NONE', *, *, #684, .T. ) ; +#2665 = CARTESIAN_POINT ( 'NONE', ( -9.977845042407310000, -23.28044930966249700, 17.47792798127923700 ) ) ; +#2666 = CARTESIAN_POINT ( 'NONE', ( 16.88823408840651300, -8.827402837097762900, 24.97804174596848600 ) ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 152.4000000000000100 ) ) ; +#2668 = VERTEX_POINT ( 'NONE', #1501 ) ; +#2669 = DIRECTION ( 'NONE', ( -3.829144158930879800E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2670 = ORIENTED_EDGE ( 'NONE', *, *, #2191, .F. ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#2672 = AXIS2_PLACEMENT_3D ( 'NONE', #1805, #895, #436 ) ; +#2673 = VERTEX_POINT ( 'NONE', #2877 ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2675 = CARTESIAN_POINT ( 'NONE', ( -8.760605227908692800, -25.13390137926045000, 16.16188055304298000 ) ) ; +#2676 = EDGE_LOOP ( 'NONE', ( #1915, #796, #606, #1364 ) ) ; +#2677 = CARTESIAN_POINT ( 'NONE', ( 18.68046166164635500, 3.856645627774312400, 24.90802454745167100 ) ) ; +#2678 = DIRECTION ( 'NONE', ( -1.000000000000000000, 6.938893903907228400E-016, 0.0000000000000000000 ) ) ; +#2679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2680 = VERTEX_POINT ( 'NONE', #2278 ) ; +#2681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -22.89999999999999900, 9.999999999999996400 ) ) ; +#2683 = CIRCLE ( 'NONE', #2590, 2.500000000000000400 ) ; +#2684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2685 = AXIS2_PLACEMENT_3D ( 'NONE', #397, #182, #1783 ) ; +#2686 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2687 = CIRCLE ( 'NONE', #1923, 2.500000000000000000 ) ; +#2688 = DIRECTION ( 'NONE', ( 1.982541115402064400E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2689 = LINE ( 'NONE', #721, #1460 ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( 13.53225466511586300, 13.41005489924925300, 23.86730825479461900 ) ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -5.000000000000000900, 34.89999999999995600 ) ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( -1.914572079465439800E-016, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2693 = EDGE_CURVE ( 'NONE', #1905, #835, #766, .T. ) ; +#2694 = EDGE_CURVE ( 'NONE', #259, #256, #1918, .T. ) ; +#2695 = VECTOR ( 'NONE', #1484, 1000.000000000000000 ) ; +#2696 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999994700, -47.20000000000003100, 17.50000000000000000 ) ) ; +#2697 = ORIENTED_EDGE ( 'NONE', *, *, #2043, .F. ) ; +#2698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2699 = LINE ( 'NONE', #918, #247 ) ; +#2700 = AXIS2_PLACEMENT_3D ( 'NONE', #1351, #2499, #635 ) ; +#2701 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.776356839400250500E-015, 0.0000000000000000000 ) ) ; +#2702 = DIRECTION ( 'NONE', ( -3.829144158930881000E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( 10.09537445886375600, 16.15515212544350700, 18.71628488833229700 ) ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2705 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2706 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ; +#2707 = AXIS2_PLACEMENT_3D ( 'NONE', #956, #712, #1188 ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( 6.082251082251080900, -12.66525648269531400, 149.9000000000000100 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 15.59462271190964200, -25.33284149808674400, 8.288886836155628000 ) ) ; +#2710 = VERTEX_POINT ( 'NONE', #1049 ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 12.66525648269531200, -6.082251082251084500, 34.89999999999995600 ) ) ; +#2712 = EDGE_LOOP ( 'NONE', ( #1337, #2509, #72, #2928 ) ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 10.41165212634383300, 149.9000000000000100 ) ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 152.4000000000000100 ) ) ; +#2715 = EDGE_CURVE ( 'NONE', #2356, #730, #2476, .T. ) ; +#2716 = DIRECTION ( 'NONE', ( -0.4329004329004327900, -0.9014417425405915100, -2.473082623391930100E-017 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -5.000000000000000900, 32.39999999999995600 ) ) ; +#2718 = ORIENTED_EDGE ( 'NONE', *, *, #1803, .T. ) ; +#2719 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, -17.50000000000000400 ) ) ; +#2720 = ORIENTED_EDGE ( 'NONE', *, *, #1405, .F. ) ; +#2721 = AXIS2_PLACEMENT_3D ( 'NONE', #2519, #1134, #2740 ) ; +#2722 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, -16.21426840779441400, 17.49999999999999600 ) ) ; +#2723 = VERTEX_POINT ( 'NONE', #1512 ) ; +#2724 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2725 = FACE_OUTER_BOUND ( 'NONE', #1199, .T. ) ; +#2726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2727 = FACE_OUTER_BOUND ( 'NONE', #780, .T. ) ; +#2728 = DIRECTION ( 'NONE', ( -3.469446951953614700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2729 = FACE_OUTER_BOUND ( 'NONE', #2448, .T. ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -47.20000000000003100, -17.49999999999999600 ) ) ; +#2731 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -2.500000000000000400, 149.9000000000000100 ) ) ; +#2732 = CIRCLE ( 'NONE', #2636, 16.55000000000000100 ) ; +#2733 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 149.9000000000000100 ) ) ; +#2734 = CIRCLE ( 'NONE', #2819, 11.55000000000000400 ) ; +#2735 = LINE ( 'NONE', #2886, #901 ) ; +#2736 = EDGE_CURVE ( 'NONE', #2613, #2127, #1392, .T. ) ; +#2737 = EDGE_CURVE ( 'NONE', #827, #583, #1245, .T. ) ; +#2738 = FACE_OUTER_BOUND ( 'NONE', #970, .T. ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2740 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2741 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .F. ) ; +#2742 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .F. ) ; +#2743 = AXIS2_PLACEMENT_3D ( 'NONE', #2910, #385, #1995 ) ; +#2744 = VERTEX_POINT ( 'NONE', #1061 ) ; +#2745 = EDGE_LOOP ( 'NONE', ( #749, #339, #916, #2630, #390, #2176 ) ) ; +#2746 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2747 = ADVANCED_FACE ( 'NONE', ( #16 ), #87, .F. ) ; +#2748 = DIRECTION ( 'NONE', ( -0.9014417425405915100, 0.4329004329004327900, 0.0000000000000000000 ) ) ; +#2749 = ORIENTED_EDGE ( 'NONE', *, *, #1866, .F. ) ; +#2750 = EDGE_CURVE ( 'NONE', #2004, #336, #2392, .T. ) ; +#2751 = EDGE_CURVE ( 'NONE', #2668, #1474, #1780, .T. ) ; +#2752 = ORIENTED_EDGE ( 'NONE', *, *, #1492, .T. ) ; +#2753 = DIRECTION ( 'NONE', ( -9.251858538542971800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2754 = AXIS2_PLACEMENT_3D ( 'NONE', #2704, #1333, #2934 ) ; +#2755 = ORIENTED_EDGE ( 'NONE', *, *, #2949, .T. ) ; +#2756 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #158, 'distance_accuracy_value', 'NONE'); +#2757 = CIRCLE ( 'NONE', #223, 2.500000000000000000 ) ; +#2758 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2759 = LINE ( 'NONE', #2538, #986 ) ; +#2760 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #382, #1770 ) ; +#2761 = VECTOR ( 'NONE', #470, 1000.000000000000000 ) ; +#2762 = ADVANCED_FACE ( 'NONE', ( #543 ), #2940, .F. ) ; +#2763 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#2764 = LINE ( 'NONE', #1712, #928 ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 8.408091574663139100, -25.29267025258847200, 15.74006723365445000 ) ) ; +#2766 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ; +#2767 = CYLINDRICAL_SURFACE ( 'NONE', #338, 2.500000000000000400 ) ; +#2768 = PLANE ( 'NONE', #1774 ) ; +#2769 = AXIS2_PLACEMENT_3D ( 'NONE', #1550, #173, #1777 ) ; +#2770 = SURFACE_SIDE_STYLE ('',( #1283 ) ) ; +#2771 = ORIENTED_EDGE ( 'NONE', *, *, #1373, .F. ) ; +#2772 = ADVANCED_FACE ( 'NONE', ( #699 ), #1699, .F. ) ; +#2773 = VERTEX_POINT ( 'NONE', #2912 ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 10.41165212634383200, 34.89999999999995600 ) ) ; +#2775 = ORIENTED_EDGE ( 'NONE', *, *, #214, .T. ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 50.79999999999999700, -17.49999999999999600 ) ) ; +#2777 = AXIS2_PLACEMENT_3D ( 'NONE', #1390, #471, #2090 ) ; +#2778 = VERTEX_POINT ( 'NONE', #1997 ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 9.833757152386365200, 49.21735224922267800, 17.33227492390912500 ) ) ; +#2780 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ; +#2781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -47.20000000000003100, 10.00000000000000500 ) ) ; +#2783 = ORIENTED_EDGE ( 'NONE', *, *, #1717, .T. ) ; +#2784 = EDGE_CURVE ( 'NONE', #78, #1361, #479, .T. ) ; +#2785 = EDGE_CURVE ( 'NONE', #1595, #1812, #2325, .T. ) ; +#2786 = CIRCLE ( 'NONE', #2234, 4.999999999999999100 ) ; +#2787 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2788 = ADVANCED_FACE ( 'NONE', ( #2855, #1020 ), #2180, .T. ) ; +#2789 = AXIS2_PLACEMENT_3D ( 'NONE', #2625, #2641, #1269 ) ; +#2790 = SPHERICAL_SURFACE ( 'NONE', #2642, 2.500000000000000000 ) ; +#2791 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, 48.29999999999999700, 17.50000000000000000 ) ) ; +#2793 = LINE ( 'NONE', #2862, #345 ) ; +#2794 = CIRCLE ( 'NONE', #2333, 2.500000000000002200 ) ; +#2795 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, 4.999999999999999100, 149.9000000000000100 ) ) ; +#2796 = CIRCLE ( 'NONE', #2985, 2.500000000000000000 ) ; +#2797 = FACE_OUTER_BOUND ( 'NONE', #1234, .T. ) ; +#2798 = EDGE_LOOP ( 'NONE', ( #246, #2035, #2599, #2988 ) ) ; +#2799 = FACE_OUTER_BOUND ( 'NONE', #1618, .T. ) ; +#2800 = EDGE_CURVE ( 'NONE', #2204, #827, #1631, .T. ) ; +#2801 = EDGE_CURVE ( 'NONE', #1474, #1944, #2786, .T. ) ; +#2802 = ADVANCED_FACE ( 'NONE', ( #2265 ), #1096, .T. ) ; +#2803 = EDGE_LOOP ( 'NONE', ( #2371, #578, #613, #2498, #2548, #1416, #2162, #1654, #1059, #1677 ) ) ; +#2804 = EDGE_LOOP ( 'NONE', ( #2852, #2970, #2311, #2431 ) ) ; +#2805 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #1917, #530 ) ; +#2806 = VERTEX_POINT ( 'NONE', #2708 ) ; +#2807 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -2.500000000000000400, 149.9000000000000100 ) ) ; +#2809 = AXIS2_PLACEMENT_3D ( 'NONE', #1453, #79, #1681 ) ; +#2810 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ; +#2811 = ORIENTED_EDGE ( 'NONE', *, *, #2651, .T. ) ; +#2812 = DIRECTION ( 'NONE', ( 4.956352788505162200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2813 = ADVANCED_FACE ( 'NONE', ( #2725 ), #1486, .F. ) ; +#2814 = ORIENTED_EDGE ( 'NONE', *, *, #1451, .T. ) ; +#2815 = COLOUR_RGB ( '',1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#2816 = ORIENTED_EDGE ( 'NONE', *, *, #886, .F. ) ; +#2817 = PLANE ( 'NONE', #1252 ) ; +#2818 = CIRCLE ( 'NONE', #2892, 2.500000000000000400 ) ; +#2819 = AXIS2_PLACEMENT_3D ( 'NONE', #527, #2154, #765 ) ; +#2820 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.829144158930881700E-017, 0.0000000000000000000 ) ) ; +#2821 = FACE_OUTER_BOUND ( 'NONE', #1790, .T. ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 48.29999999999999700, 10.00000000000000500 ) ) ; +#2823 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2824 = CIRCLE ( 'NONE', #1810, 11.55000000000000200 ) ; +#2825 = ADVANCED_FACE ( 'NONE', ( #1572 ), #951, .T. ) ; +#2826 = CIRCLE ( 'NONE', #519, 2.500000000000002200 ) ; +#2827 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2828 = ORIENTED_EDGE ( 'NONE', *, *, #1804, .F. ) ; +#2829 = AXIS2_PLACEMENT_3D ( 'NONE', #2033, #648, #2271 ) ; +#2830 = FACE_OUTER_BOUND ( 'NONE', #2876, .T. ) ; +#2831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2832 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( -10.23409302307225800, 16.06791603974123100, 19.42069737434324500 ) ) ; +#2835 = EDGE_CURVE ( 'NONE', #2937, #1386, #337, .T. ) ; +#2836 = EDGE_CURVE ( 'NONE', #1898, #2012, #888, .T. ) ; +#2837 = VERTEX_POINT ( 'NONE', #1109 ) ; +#2838 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -29.05000000000000400, -17.50000000000000400 ) ) ; +#2839 = ORIENTED_EDGE ( 'NONE', *, *, #774, .F. ) ; +#2840 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2841 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #1669, #292 ) ; +#2842 = ADVANCED_FACE ( 'NONE', ( #266 ), #2644, .F. ) ; +#2843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -6.938893903907222500E-016 ) ) ; +#2844 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 50.79999999999999700, 7.817541634481465000 ) ) ; +#2845 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( -14.62283818975376400, 12.21189381993462300, 24.42801066337679200 ) ) ; +#2847 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ; +#2848 = AXIS2_PLACEMENT_3D ( 'NONE', #727, #2347, #577 ) ; +#2849 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2850 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .T. ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, -17.50000000000000400 ) ) ; +#2852 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ; +#2853 = CARTESIAN_POINT ( 'NONE', ( 17.08942546705802800, 49.68258964482797100, 9.599530718962489200 ) ) ; +#2854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2855 = FACE_OUTER_BOUND ( 'NONE', #978, .T. ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( -18.97716052439858100, 1.923826292652703900, 24.85458625471769900 ) ) ; +#2857 = EDGE_CURVE ( 'NONE', #706, #145, #2104, .T. ) ; +#2858 = FACE_OUTER_BOUND ( 'NONE', #832, .T. ) ; +#2859 = CARTESIAN_POINT ( 'NONE', ( -7.164502164502165400, 14.91886083904679000, 152.4000000000000100 ) ) ; +#2860 = AXIS2_PLACEMENT_3D ( 'NONE', #430, #2051, #662 ) ; +#2861 = LINE ( 'NONE', #2851, #1025 ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 9.572860397327202600E-017, 2.499999999999999600, 149.9000000000000100 ) ) ; +#2863 = CIRCLE ( 'NONE', #2178, 2.500000000000000000 ) ; +#2864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2865 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 5.000000000000000000, 34.89999999999995600 ) ) ; +#2866 = CARTESIAN_POINT ( 'NONE', ( -16.17403740940008900, -10.11074017197297100, 24.90368059037736300 ) ) ; +#2867 = CIRCLE ( 'NONE', #2672, 2.500000000000000000 ) ; +#2868 = CIRCLE ( 'NONE', #2350, 2.500000000000000000 ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#2870 = DIRECTION ( 'NONE', ( 1.982541115402064400E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2871 = FACE_OUTER_BOUND ( 'NONE', #792, .T. ) ; +#2872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2873 = ORIENTED_EDGE ( 'NONE', *, *, #1887, .T. ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -8.673617379884035500E-016, 149.9000000000000100 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( -10.94596599370078100, -15.59419296264028200, 21.17391772246067600 ) ) ; +#2876 = EDGE_LOOP ( 'NONE', ( #525, #49, #1318, #2500 ) ) ; +#2877 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999996400, -22.89999999999999900, 17.50000000000000000 ) ) ; +#2878 = EDGE_CURVE ( 'NONE', #1809, #920, #1423, .T. ) ; +#2879 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 101.5999999999999900, 0.0000000000000000000 ) ) ; +#2880 = EDGE_CURVE ( 'NONE', #2882, #757, #804, .T. ) ; +#2881 = CARTESIAN_POINT ( 'NONE', ( -17.18055791241518900, -24.13539832442686600, 9.686739816770572300 ) ) ; +#2882 = VERTEX_POINT ( 'NONE', #2972 ) ; +#2883 = ORIENTED_EDGE ( 'NONE', *, *, #2948, .F. ) ; +#2884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( 13.22322966003174300, -13.71961609015025400, 23.67365472195887600 ) ) ; +#2886 = CARTESIAN_POINT ( 'NONE', ( -13.82579111660523100, 2.500000000000000000, 34.89999999999995600 ) ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -10.41165212634383300, 149.9000000000000100 ) ) ; +#2888 = VERTEX_POINT ( 'NONE', #1806 ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383700, 2.500000000000000000, 34.89999999999995600 ) ) ; +#2890 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .F. ) ; +#2891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2892 = AXIS2_PLACEMENT_3D ( 'NONE', #2479, #1092, #2705 ) ; +#2893 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .T. ) ; +#2894 = LINE ( 'NONE', #2923, #1605 ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 17.88429168692787700, -6.632580148814793300, 24.99580709877462700 ) ) ; +#2896 = DIRECTION ( 'NONE', ( 1.000000000000000000, -8.673617379884035500E-016, 0.0000000000000000000 ) ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2898 = VECTOR ( 'NONE', #432, 1000.000000000000000 ) ; +#2899 = EDGE_CURVE ( 'NONE', #696, #976, #2575, .T. ) ; +#2900 = EDGE_CURVE ( 'NONE', #2680, #981, #1955, .T. ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -5.000000000000000900, 32.39999999999995600 ) ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( -12.66525648269531100, -6.082251082251083600, 149.9000000000000100 ) ) ; +#2903 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #179, #2478 ) ; +#2904 = DIRECTION ( 'NONE', ( -3.829144158930879800E-017, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2905 = CYLINDRICAL_SURFACE ( 'NONE', #992, 2.500000000000000400 ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( -8.288886836155633400, -25.33284149808674000, 15.59462271190964000 ) ) ; +#2907 = ORIENTED_EDGE ( 'NONE', *, *, #228, .T. ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 18.02872121581262400, 6.172524238643741300, 24.98274800264728800 ) ) ; +#2909 = FACE_OUTER_BOUND ( 'NONE', #447, .T. ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 9.572860397327206300E-017, -2.500000000000000400, 32.39999999999995600 ) ) ; +#2911 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #2028, #643 ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 7.164502164502161800, -14.91886083904679000, 152.4000000000000100 ) ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.39999999999999900, 0.0000000000000000000 ) ) ; +#2914 = SURFACE_SIDE_STYLE ('',( #55 ) ) ; +#2915 = ORIENTED_EDGE ( 'NONE', *, *, #484, .F. ) ; +#2916 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 9.572860397327202600E-017, 32.39999999999995600 ) ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 4.999999999999999100, 34.89999999999995600 ) ) ; +#2918 = EDGE_LOOP ( 'NONE', ( #83, #109, #1976, #1422, #1444, #632 ) ) ; +#2919 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -10.41165212634383300, 152.4000000000000100 ) ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( 13.05877591752802000, 13.87139448939484000, 23.54684122470512300 ) ) ; +#2921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2922 = VERTEX_POINT ( 'NONE', #1376 ) ; +#2923 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, -47.20000000000003100, -17.50000000000000400 ) ) ; +#2924 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.89999999999995600 ) ) ; +#2925 = ORIENTED_EDGE ( 'NONE', *, *, #684, .F. ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 48.29999999999999700, -17.49999999999999600 ) ) ; +#2927 = AXIS2_PLACEMENT_3D ( 'NONE', #2916, #2686, #616 ) ; +#2928 = ORIENTED_EDGE ( 'NONE', *, *, #1492, .F. ) ; +#2929 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .T. ) ; +#2930 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2931 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -5.000000000000000900, 34.89999999999995600 ) ) ; +#2932 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 10.01223254151195600, 16.20674203626482100, 17.99257010816825900 ) ) ; +#2934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2935 = DIRECTION ( 'NONE', ( -3.829144158930881700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2936 = EDGE_LOOP ( 'NONE', ( #2453, #1280, #690, #2564 ) ) ; +#2937 = VERTEX_POINT ( 'NONE', #2524 ) ; +#2938 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 15.15002851521662700, -25.40000000000000200, 7.933790589234931200 ) ) ; +#2940 = SPHERICAL_SURFACE ( 'NONE', #1754, 2.500000000000000000 ) ; +#2941 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ; +#2942 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #95, #1879 ) ; +#2943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2944 = CIRCLE ( 'NONE', #1860, 2.499999999999999600 ) ; +#2945 = CYLINDRICAL_SURFACE ( 'NONE', #285, 2.500000000000000400 ) ; +#2946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2948 = EDGE_CURVE ( 'NONE', #654, #1773, #2040, .T. ) ; +#2949 = EDGE_CURVE ( 'NONE', #199, #2673, #2516, .T. ) ; +#2950 = FACE_OUTER_BOUND ( 'NONE', #752, .T. ) ; +#2951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2952 = ORIENTED_EDGE ( 'NONE', *, *, #227, .F. ) ; +#2953 = CARTESIAN_POINT ( 'NONE', ( 10.41165212634383200, -5.000000000000000900, 32.39999999999995600 ) ) ; +#2954 = VECTOR ( 'NONE', #2621, 1000.000000000000000 ) ; +#2955 = AXIS2_PLACEMENT_3D ( 'NONE', #2869, #557, #1952 ) ; +#2956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2957 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ; +#2958 = CARTESIAN_POINT ( 'NONE', ( -7.817541634481457900, -25.39999999999999900, 15.00000000000000000 ) ) ; +#2959 = CARTESIAN_POINT ( 'NONE', ( 13.82579111660523300, 5.000000000000000000, 32.39999999999995600 ) ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( -15.30091669073113000, 50.79999999999999700, 8.050705648101425600 ) ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( -10.41165212634383300, -8.673617379884035500E-016, 149.9000000000000100 ) ) ; +#2962 = VERTEX_POINT ( 'NONE', #1599 ) ; +#2963 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #1873, #495 ) ; +#2964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2965 = EDGE_LOOP ( 'NONE', ( #209, #443, #1006, #517 ) ) ; +#2966 = VERTEX_POINT ( 'NONE', #1822 ) ; +#2967 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2968 = EDGE_CURVE ( 'NONE', #2324, #90, #1875, .T. ) ; +#2969 = EDGE_CURVE ( 'NONE', #2882, #1980, #664, .T. ) ; +#2970 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .T. ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( 9.572860397327206300E-017, -2.500000000000000400, 149.9000000000000100 ) ) ; +#2972 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999999100, 152.4000000000000100 ) ) ; +#2973 = PLANE ( 'NONE', #113 ) ; +#2974 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ; +#2975 = AXIS2_PLACEMENT_3D ( 'NONE', #785, #2854, #100 ) ; +#2976 = ORIENTED_EDGE ( 'NONE', *, *, #2043, .T. ) ; +#2977 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 32.39999999999995600 ) ) ; +#2978 = DIRECTION ( 'NONE', ( 3.829144158930881700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2979 = EDGE_LOOP ( 'NONE', ( #196, #149, #342, #2070 ) ) ; +#2980 = AXIS2_PLACEMENT_3D ( 'NONE', #1890, #748, #2820 ) ; +#2981 = CIRCLE ( 'NONE', #1814, 7.500000000000000000 ) ; +#2982 = CIRCLE ( 'NONE', #237, 4.999999999999999100 ) ; +#2983 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Arm', ( #1456, #2777 ), #1549 ) ; +#2984 = SPHERICAL_SURFACE ( 'NONE', #689, 2.500000000000000000 ) ; +#2985 = AXIS2_PLACEMENT_3D ( 'NONE', #1655, #1185, #1531 ) ; +#2986 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ; +#2987 = CYLINDRICAL_SURFACE ( 'NONE', #2565, 2.500000000000000000 ) ; +#2988 = ORIENTED_EDGE ( 'NONE', *, *, #2785, .T. ) ; +#2989 = ORIENTED_EDGE ( 'NONE', *, *, #1510, .F. ) ; +#2990 = ADVANCED_FACE ( 'NONE', ( #47 ), #1204, .F. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step new file mode 100644 index 0000000..92b5af4 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step @@ -0,0 +1,504 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Base_1.step', + '2016-04-19T10:44:26', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ; +#3 = STYLED_ITEM ( 'NONE', ( #381 ), #236 ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#6 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #14 ) ; +#8 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ; +#9 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ; +#10 = AXIS2_PLACEMENT_3D ( 'NONE', #220, #64, #298 ) ; +#11 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #473, #467 ) ; +#12 = ADVANCED_FACE ( 'NONE', ( #435 ), #230, .T. ) ; +#13 = EDGE_LOOP ( 'NONE', ( #472, #437, #88, #39 ) ) ; +#14 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#15 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #188, #1 ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#17 = ADVANCED_FACE ( 'NONE', ( #464 ), #285, .T. ) ; +#18 = PRODUCT_CONTEXT ( 'NONE', #59, 'mechanical' ) ; +#19 = PLANE ( 'NONE', #436 ) ; +#20 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ; +#22 = VERTEX_POINT ( 'NONE', #5 ) ; +#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#25 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#26 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #311, #124 ) ; +#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ; +#30 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #23, #20 ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#33 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ; +#34 = SURFACE_SIDE_STYLE ('',( #385 ) ) ; +#35 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #274, #468 ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#38 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #180, .T. ) ; +#40 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #237, #42 ) ; +#42 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ; +#44 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#45 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #480, #216 ) ; +#46 =( CONVERSION_BASED_UNIT ( 'INCH', #299 ) LENGTH_UNIT ( ) NAMED_UNIT ( #116 ) ); +#47 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #74, #62 ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #105, #77 ) ; +#49 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#50 = ADVANCED_FACE ( 'NONE', ( #457 ), #452, .T. ) ; +#51 = SURFACE_STYLE_USAGE ( .BOTH. , #53 ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ; +#53 = SURFACE_SIDE_STYLE ('',( #308 ) ) ; +#54 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #438, #192 ) ; +#55 = FILL_AREA_STYLE ('',( #86 ) ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #250, .T. ) ; +#57 = EDGE_LOOP ( 'NONE', ( #301, #270, #29, #466 ) ) ; +#58 = VERTEX_POINT ( 'NONE', #373 ) ; +#59 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#60 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #30, #300 ) ; +#61 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #59 ) ; +#62 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #14, 'design' ) ; +#63 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ; +#64 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#65 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #200 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #279, #98, #314 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#66 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#68 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#70 = EDGE_LOOP ( 'NONE', ( #485, #21, #78, #80, #302, #397, #79, #233, #432, #474, #2, #195 ) ) ; +#71 = PRODUCT ( 'Trellais_Base_1', 'Trellais_Base_1', '', ( #18 ) ) ; +#72 = AXIS2_PLACEMENT_3D ( 'NONE', #433, #161, #254 ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#74 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #71, .NOT_KNOWN. ) ; +#75 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ; +#76 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ; +#79 = ORIENTED_EDGE ( 'NONE', *, *, #234, .T. ) ; +#80 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ; +#81 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #126, #128 ) ; +#82 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #410, #396 ) ; +#83 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#84 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#85 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #280, #232 ) ; +#86 = FILL_AREA_STYLE_COLOUR ( '', #312 ) ; +#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#88 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#90 =( CONVERSION_BASED_UNIT ( 'INCH', #318 ) LENGTH_UNIT ( ) NAMED_UNIT ( #44 ) ); +#91 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#93 = EDGE_LOOP ( 'NONE', ( #137, #246, #240, #225 ) ) ; +#94 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #71 ) ) ; +#95 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#97 = EDGE_LOOP ( 'NONE', ( #430, #486, #455, #184, #295, #224, #114, #245, #149, #487, #9, #460 ) ) ; +#98 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#99 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #284, #40 ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#101 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #214, #218 ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ; +#104 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ; +#105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#106 = ADVANCED_FACE ( 'NONE', ( #459 ), #450, .T. ) ; +#107 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ; +#108 = ADVANCED_FACE ( 'NONE', ( #453 ), #227, .F. ) ; +#109 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#110 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #375, #440 ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#113 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #46, 'distance_accuracy_value', 'NONE'); +#114 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#116 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#117 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#119 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ; +#120 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ; +#121 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #244, #243 ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#123 = VERTEX_POINT ( 'NONE', #37 ) ; +#124 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#125 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #3 ) ) ; +#126 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#127 = EDGE_CURVE ( 'NONE', #348, #421, #454, .T. ) ; +#128 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#130 = EDGE_LOOP ( 'NONE', ( #104, #38, #119, #145 ) ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#134 = EDGE_CURVE ( 'NONE', #283, #58, #461, .T. ) ; +#135 = ORIENTED_EDGE ( 'NONE', *, *, #250, .F. ) ; +#136 = VERTEX_POINT ( 'NONE', #197 ) ; +#137 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ; +#138 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#139 = ADVANCED_FACE ( 'NONE', ( #444 ), #441, .T. ) ; +#140 = AXIS2_PLACEMENT_3D ( 'NONE', #293, #290, #305 ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#142 = PLANE ( 'NONE', #264 ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#144 = EDGE_CURVE ( 'NONE', #405, #123, #451, .T. ) ; +#145 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#148 = CLOSED_SHELL ( 'NONE', ( #108, #294, #139, #106, #173, #262, #207, #50, #456, #241, #337, #17, #169, #12 ) ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#153 = EDGE_CURVE ( 'NONE', #462, #276, #445, .T. ) ; +#154 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#155 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ; +#156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#158 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_1', ( #236, #31 ), #249 ) ; +#159 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ; +#160 = EDGE_CURVE ( 'NONE', #289, #265, #439, .T. ) ; +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#162 = AXIS2_PLACEMENT_3D ( 'NONE', #215, #212, #206 ) ; +#163 = VERTEX_POINT ( 'NONE', #129 ) ; +#164 = EDGE_CURVE ( 'NONE', #475, #22, #425, .T. ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#166 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#167 = VERTEX_POINT ( 'NONE', #287 ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#169 = ADVANCED_FACE ( 'NONE', ( #427 ), #257, .T. ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#171 = EDGE_CURVE ( 'NONE', #407, #193, #418, .T. ) ; +#172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#173 = ADVANCED_FACE ( 'NONE', ( #415 ), #380, .T. ) ; +#174 = EDGE_CURVE ( 'NONE', #475, #309, #414, .T. ) ; +#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#180 = EDGE_CURVE ( 'NONE', #123, #470, #416, .T. ) ; +#181 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#182 = EDGE_LOOP ( 'NONE', ( #63, #221, #75, #43 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#184 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ; +#185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#186 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #90, 'distance_accuracy_value', 'NONE'); +#187 = EDGE_CURVE ( 'NONE', #470, #475, #413, .T. ) ; +#188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ; +#190 = EDGE_CURVE ( 'NONE', #462, #421, #419, .T. ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#192 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#193 = VERTEX_POINT ( 'NONE', #89 ) ; +#194 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ; +#196 = EDGE_CURVE ( 'NONE', #265, #315, #401, .T. ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#198 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ; +#200 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #279, 'distance_accuracy_value', 'NONE'); +#201 = EDGE_CURVE ( 'NONE', #283, #470, #402, .T. ) ; +#202 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ; +#204 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #175, #172 ) ; +#205 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#206 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#207 = ADVANCED_FACE ( 'NONE', ( #399 ), #392, .T. ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#209 = EDGE_CURVE ( 'NONE', #315, #477, #393, .T. ) ; +#210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ; +#212 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#213 = EDGE_CURVE ( 'NONE', #289, #278, #404, .T. ) ; +#214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ; +#218 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#219 = EDGE_CURVE ( 'NONE', #22, #283, #395, .T. ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#223 = FILL_AREA_STYLE ('',( #423 ) ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ; +#225 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ; +#226 = EDGE_CURVE ( 'NONE', #462, #163, #394, .T. ) ; +#227 = PLANE ( 'NONE', #72 ) ; +#228 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#229 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #272, #205 ) ; +#230 = PLANE ( 'NONE', #110 ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#232 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #196, .F. ) ; +#234 = EDGE_CURVE ( 'NONE', #276, #315, #388, .T. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#236 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #148 ) ; +#237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#239 = EDGE_CURVE ( 'NONE', #58, #421, #372, .T. ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ; +#241 = ADVANCED_FACE ( 'NONE', ( #383 ), #19, .F. ) ; +#242 = EDGE_CURVE ( 'NONE', #278, #447, #365, .T. ) ; +#243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#245 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#248 = EDGE_CURVE ( 'NONE', #276, #348, #367, .T. ) ; +#249 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #186 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #90, #87, #84 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#250 = EDGE_CURVE ( 'NONE', #278, #136, #363, .T. ) ; +#251 = SURFACE_STYLE_USAGE ( .BOTH. , #34 ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #234, .F. ) ; +#253 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #3 ), #65 ) ; +#254 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#255 = EDGE_CURVE ( 'NONE', #477, #407, #366, .T. ) ; +#256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#257 = PLANE ( 'NONE', #48 ) ; +#258 = EDGE_LOOP ( 'NONE', ( #420, #316, #120, #336 ) ) ; +#259 = EDGE_LOOP ( 'NONE', ( #52, #135, #484, #465 ) ) ; +#260 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#261 = EDGE_CURVE ( 'NONE', #405, #167, #362, .T. ) ; +#262 = ADVANCED_FACE ( 'NONE', ( #361 ), #469, .F. ) ; +#263 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#264 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #118, #117 ) ; +#265 = VERTEX_POINT ( 'NONE', #478 ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#268 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #47 ) ; +#269 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#270 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ; +#271 = EDGE_CURVE ( 'NONE', #479, #136, #357, .T. ) ; +#272 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#276 = VERTEX_POINT ( 'NONE', #398 ) ; +#277 = EDGE_CURVE ( 'NONE', #136, #193, #354, .T. ) ; +#278 = VERTEX_POINT ( 'NONE', #358 ) ; +#279 =( CONVERSION_BASED_UNIT ( 'INCH', #377 ) LENGTH_UNIT ( ) NAMED_UNIT ( #202 ) ); +#280 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#281 = EDGE_LOOP ( 'NONE', ( #211, #286, #33, #199 ) ) ; +#282 = EDGE_CURVE ( 'NONE', #477, #348, #352, .T. ) ; +#283 = VERTEX_POINT ( 'NONE', #345 ) ; +#284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#285 = PLANE ( 'NONE', #99 ) ; +#286 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#288 = EDGE_CURVE ( 'NONE', #163, #58, #346, .T. ) ; +#289 = VERTEX_POINT ( 'NONE', #335 ) ; +#290 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#291 = EDGE_CURVE ( 'NONE', #405, #479, #342, .T. ) ; +#292 = SHAPE_DEFINITION_REPRESENTATION ( #268, #158 ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#294 = ADVANCED_FACE ( 'NONE', ( #343 ), #333, .F. ) ; +#295 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#296 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#298 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#299 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #49 ); +#300 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #209, .T. ) ; +#302 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #209, .F. ) ; +#304 = EDGE_CURVE ( 'NONE', #447, #167, #356, .T. ) ; +#305 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#306 = STYLED_ITEM ( 'NONE', ( #307 ), #158 ) ; +#307 = PRESENTATION_STYLE_ASSIGNMENT (( #51 ) ) ; +#308 = SURFACE_STYLE_FILL_AREA ( #55 ) ; +#309 = VERTEX_POINT ( 'NONE', #275 ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#312 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ; +#313 = EDGE_CURVE ( 'NONE', #479, #447, #330, .T. ) ; +#314 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#315 = VERTEX_POINT ( 'NONE', #267 ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#318 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #83 ); +#319 = EDGE_CURVE ( 'NONE', #265, #407, #331, .T. ) ; +#320 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#321 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ; +#322 = VECTOR ( 'NONE', #181, 39.37007874015748100 ) ; +#323 = CYLINDRICAL_SURFACE ( 'NONE', #229, 0.8000000000000000400 ) ; +#324 = LINE ( 'NONE', #177, #321 ) ; +#325 = EDGE_CURVE ( 'NONE', #289, #193, #339, .T. ) ; +#326 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ; +#327 = CIRCLE ( 'NONE', #204, 0.5875000000000001300 ) ; +#328 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#330 = CIRCLE ( 'NONE', #121, 0.8999999999999999100 ) ; +#331 = CIRCLE ( 'NONE', #101, 0.8000000000000000400 ) ; +#332 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #306 ) ) ; +#333 = CYLINDRICAL_SURFACE ( 'NONE', #140, 0.5875000000000001300 ) ; +#334 = LINE ( 'NONE', #152, #322 ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#336 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ; +#337 = ADVANCED_FACE ( 'NONE', ( #328 ), #323, .T. ) ; +#338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#339 = CIRCLE ( 'NONE', #162, 0.8000000000000000400 ) ; +#340 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#341 = VECTOR ( 'NONE', #296, 39.37007874015748100 ) ; +#342 = LINE ( 'NONE', #351, #341 ) ; +#343 = FACE_OUTER_BOUND ( 'NONE', #281, .T. ) ; +#344 = VECTOR ( 'NONE', #338, 39.37007874015748100 ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#346 = CIRCLE ( 'NONE', #60, 0.8000000000000000400 ) ; +#347 = VECTOR ( 'NONE', #340, 39.37007874015748100 ) ; +#348 = VERTEX_POINT ( 'NONE', #183 ) ; +#349 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ; +#350 = EDGE_CURVE ( 'NONE', #123, #309, #327, .T. ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#352 = LINE ( 'NONE', #403, #344 ) ; +#353 = VECTOR ( 'NONE', #391, 39.37007874015748100 ) ; +#354 = LINE ( 'NONE', #387, #347 ) ; +#355 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ; +#356 = LINE ( 'NONE', #273, #355 ) ; +#357 = LINE ( 'NONE', #408, #353 ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#359 = VECTOR ( 'NONE', #109, 39.37007874015748100 ) ; +#360 = EDGE_CURVE ( 'NONE', #163, #22, #334, .T. ) ; +#361 = FACE_OUTER_BOUND ( 'NONE', #476, .T. ) ; +#362 = CIRCLE ( 'NONE', #11, 0.5875000000000001300 ) ; +#363 = CIRCLE ( 'NONE', #481, 0.8999999999999999100 ) ; +#364 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#365 = LINE ( 'NONE', #231, #389 ) ; +#366 = LINE ( 'NONE', #132, #359 ) ; +#367 = CIRCLE ( 'NONE', #482, 0.8999999999999999100 ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#369 = VECTOR ( 'NONE', #426, 39.37007874015748100 ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#372 = LINE ( 'NONE', #368, #369 ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#374 = EDGE_CURVE ( 'NONE', #309, #167, #324, .T. ) ; +#375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#376 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #306 ), #411 ) ; +#377 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #67 ); +#378 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#379 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ; +#380 = PLANE ( 'NONE', #41 ) ; +#381 = PRESENTATION_STYLE_ASSIGNMENT (( #251 ) ) ; +#382 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ; +#383 = FACE_OUTER_BOUND ( 'NONE', #259, .T. ) ; +#384 = VECTOR ( 'NONE', #364, 39.37007874015748100 ) ; +#385 = SURFACE_STYLE_FILL_AREA ( #223 ) ; +#386 = VECTOR ( 'NONE', #66, 39.37007874015748100 ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#388 = LINE ( 'NONE', #222, #384 ) ; +#389 = VECTOR ( 'NONE', #166, 39.37007874015748100 ) ; +#390 = VECTOR ( 'NONE', #95, 39.37007874015748100 ) ; +#391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#392 = CYLINDRICAL_SURFACE ( 'NONE', #10, 0.8000000000000000400 ) ; +#393 = CIRCLE ( 'NONE', #15, 0.8999999999999999100 ) ; +#394 = LINE ( 'NONE', #32, #386 ) ; +#395 = CIRCLE ( 'NONE', #27, 0.8999999999999999100 ) ; +#396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#397 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#399 = FACE_OUTER_BOUND ( 'NONE', #258, .T. ) ; +#400 = VECTOR ( 'NONE', #185, 39.37007874015748100 ) ; +#401 = LINE ( 'NONE', #25, #400 ) ; +#402 = LINE ( 'NONE', #150, #406 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#404 = LINE ( 'NONE', #157, #390 ) ; +#405 = VERTEX_POINT ( 'NONE', #147 ) ; +#406 = VECTOR ( 'NONE', #417, 39.37007874015748100 ) ; +#407 = VERTEX_POINT ( 'NONE', #143 ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#409 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ; +#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#411 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #113 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #46, #24, #26 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#412 = VECTOR ( 'NONE', #198, 39.37007874015748100 ) ; +#413 = CIRCLE ( 'NONE', #45, 0.8999999999999999100 ) ; +#414 = LINE ( 'NONE', #16, #442 ) ; +#415 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ; +#416 = LINE ( 'NONE', #448, #412 ) ; +#417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#418 = LINE ( 'NONE', #133, #429 ) ; +#419 = CIRCLE ( 'NONE', #35, 0.8000000000000000400 ) ; +#420 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ; +#421 = VERTEX_POINT ( 'NONE', #151 ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#423 = FILL_AREA_STYLE_COLOUR ( '', #382 ) ; +#424 = VECTOR ( 'NONE', #260, 39.37007874015748100 ) ; +#425 = LINE ( 'NONE', #378, #424 ) ; +#426 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#427 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ; +#428 = VECTOR ( 'NONE', #76, 39.37007874015748100 ) ; +#429 = VECTOR ( 'NONE', #320, 39.37007874015748100 ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ; +#431 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ; +#432 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#434 = EDGE_LOOP ( 'NONE', ( #189, #379, #178, #370 ) ) ; +#435 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ; +#436 = AXIS2_PLACEMENT_3D ( 'NONE', #371, #210, #194 ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #174, .T. ) ; +#438 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#439 = LINE ( 'NONE', #36, #428 ) ; +#440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#441 = CYLINDRICAL_SURFACE ( 'NONE', #54, 0.8999999999999999100 ) ; +#442 = VECTOR ( 'NONE', #156, 39.37007874015748100 ) ; +#443 = VECTOR ( 'NONE', #131, 39.37007874015748100 ) ; +#444 = FACE_OUTER_BOUND ( 'NONE', #434, .T. ) ; +#445 = LINE ( 'NONE', #235, #431 ) ; +#446 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ; +#447 = VERTEX_POINT ( 'NONE', #170 ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#449 = VECTOR ( 'NONE', #256, 39.37007874015748100 ) ; +#450 = CYLINDRICAL_SURFACE ( 'NONE', #81, 0.8999999999999999100 ) ; +#451 = LINE ( 'NONE', #165, #443 ) ; +#452 = CYLINDRICAL_SURFACE ( 'NONE', #85, 0.8999999999999999100 ) ; +#453 = FACE_OUTER_BOUND ( 'NONE', #182, .T. ) ; +#454 = LINE ( 'NONE', #191, #446 ) ; +#455 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ; +#456 = ADVANCED_FACE ( 'NONE', ( #326 ), #142, .T. ) ; +#457 = FACE_OUTER_BOUND ( 'NONE', #471, .T. ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#459 = FACE_OUTER_BOUND ( 'NONE', #483, .T. ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #180, .F. ) ; +#461 = LINE ( 'NONE', #4, #449 ) ; +#462 = VERTEX_POINT ( 'NONE', #141 ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#464 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ; +#465 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ; +#466 = ORIENTED_EDGE ( 'NONE', *, *, #196, .T. ) ; +#467 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#468 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#469 = PLANE ( 'NONE', #82 ) ; +#470 = VERTEX_POINT ( 'NONE', #115 ) ; +#471 = EDGE_LOOP ( 'NONE', ( #107, #56, #409, #155 ) ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ; +#473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#474 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ; +#475 = VERTEX_POINT ( 'NONE', #111 ) ; +#476 = EDGE_LOOP ( 'NONE', ( #203, #68, #217, #159 ) ) ; +#477 = VERTEX_POINT ( 'NONE', #92 ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#479 = VERTEX_POINT ( 'NONE', #112 ) ; +#480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#481 = AXIS2_PLACEMENT_3D ( 'NONE', #238, #329, #138 ) ; +#482 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #28, #263 ) ; +#483 = EDGE_LOOP ( 'NONE', ( #252, #349, #8, #303 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ; +#485 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ; +#486 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ; +#487 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step new file mode 100644 index 0000000..24f3de7 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step @@ -0,0 +1,996 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Base_2.step', + '2016-04-19T10:44:27', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#2 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3 = EDGE_CURVE ( 'NONE', #611, #59, #673, .T. ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #716, #220 ) ; +#6 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #519 ) ; +#7 = ORIENTED_EDGE ( 'NONE', *, *, #728, .T. ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#9 = EDGE_CURVE ( 'NONE', #791, #21, #670, .T. ) ; +#10 = EDGE_CURVE ( 'NONE', #21, #779, #671, .T. ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#12 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#14 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#16 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ; +#19 = EDGE_CURVE ( 'NONE', #747, #830, #677, .T. ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ; +#21 = VERTEX_POINT ( 'NONE', #215 ) ; +#22 = EDGE_CURVE ( 'NONE', #208, #208, #661, .T. ) ; +#23 = EDGE_CURVE ( 'NONE', #937, #944, #659, .T. ) ; +#24 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#26 = EDGE_CURVE ( 'NONE', #347, #208, #667, .T. ) ; +#27 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29 = VERTEX_POINT ( 'NONE', #245 ) ; +#30 = EDGE_CURVE ( 'NONE', #756, #59, #654, .T. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( -0.08299456471625589500, 0.9043408528552404600, -1.361910545740200100 ) ) ; +#32 = ORIENTED_EDGE ( 'NONE', *, *, #775, .F. ) ; +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000006700, 0.8903699539794773800, -1.000000000000000200 ) ) ; +#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#36 = ADVANCED_FACE ( 'NONE', ( #653 ), #83, .F. ) ; +#37 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#38 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#40 = EDGE_CURVE ( 'NONE', #142, #706, #644, .T. ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#42 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43 = ADVANCED_FACE ( 'NONE', ( #650 ), #637, .T. ) ; +#44 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45 = EDGE_CURVE ( 'NONE', #208, #900, #639, .T. ) ; +#46 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ; +#50 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#54 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#55 = AXIS2_PLACEMENT_3D ( 'NONE', #824, #563, #181 ) ; +#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.8903699539794776000, -3.000000000000000400 ) ) ; +#59 = VERTEX_POINT ( 'NONE', #734 ) ; +#60 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61 = EDGE_CURVE ( 'NONE', #753, #96, #636, .T. ) ; +#62 = EDGE_CURVE ( 'NONE', #900, #851, #642, .T. ) ; +#63 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64 = EDGE_CURVE ( 'NONE', #874, #763, #628, .T. ) ; +#65 = AXIS2_PLACEMENT_3D ( 'NONE', #210, #104, #618 ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#67 = VERTEX_POINT ( 'NONE', #231 ) ; +#68 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#71 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #361, #291 ) ; +#73 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#75 = EDGE_CURVE ( 'NONE', #851, #142, #622, .T. ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ; +#78 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ; +#80 = EDGE_CURVE ( 'NONE', #829, #386, #623, .T. ) ; +#81 = EDGE_CURVE ( 'NONE', #347, #156, #615, .T. ) ; +#82 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ; +#83 = PLANE ( 'NONE', #551 ) ; +#84 = STYLED_ITEM ( 'NONE', ( #481 ), #476 ) ; +#85 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 0.08303899349228448200, 0.9043370025374136700, -1.361927527457784900 ) ) ; +#87 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( -0.1092859923199244000, 0.9009199821345862400, -1.380741065600105800 ) ) ; +#89 = EDGE_CURVE ( 'NONE', #67, #386, #625, .T. ) ; +#90 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#91 = PLANE ( 'NONE', #784 ) ; +#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ; +#95 = EDGE_CURVE ( 'NONE', #763, #944, #608, .T. ) ; +#96 = VERTEX_POINT ( 'NONE', #815 ) ; +#97 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#99 = ADVANCED_FACE ( 'NONE', ( #612 ), #591, .T. ) ; +#100 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #276 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #108, #621, #157 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#101 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( -1.690330946079762900E-015, 0.7373699539794775800, -1.497499999999998700 ) ) ; +#103 = ADVANCED_FACE ( 'NONE', ( #605 ), #589, .F. ) ; +#104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#105 = AXIS2_PLACEMENT_3D ( 'NONE', #599, #867, #533 ) ; +#106 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#108 =( CONVERSION_BASED_UNIT ( 'INCH', #298 ) LENGTH_UNIT ( ) NAMED_UNIT ( #51 ) ); +#109 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#110 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ; +#111 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#112 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#113 = EDGE_CURVE ( 'NONE', #660, #67, #590, .T. ) ; +#114 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #278, #894 ) ; +#115 = VERTEX_POINT ( 'NONE', #289 ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ; +#118 = EDGE_CURVE ( 'NONE', #386, #803, #601, .T. ) ; +#119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.8903699539794777100, -1.494531455293122400 ) ) ; +#125 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #559, #12 ) ; +#126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#127 = EDGE_CURVE ( 'NONE', #757, #195, #588, .T. ) ; +#128 = ORIENTED_EDGE ( 'NONE', *, *, #869, .F. ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ; +#130 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ; +#131 = EDGE_CURVE ( 'NONE', #803, #660, #604, .T. ) ; +#132 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #213, #349 ) ; +#133 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ; +#135 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #886, #810 ) ; +#136 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#137 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #528, 'distance_accuracy_value', 'NONE'); +#138 = CARTESIAN_POINT ( 'NONE', ( 0.05356634221386298600, 0.9070503678270005500, -1.348538400958563700 ) ) ; +#139 = EDGE_CURVE ( 'NONE', #691, #756, #583, .T. ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( -0.1314786984691889100, 0.8972860744427430000, -1.404408607860570000 ) ) ; +#141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#142 = VERTEX_POINT ( 'NONE', #715 ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#146 = ADVANCED_FACE ( 'NONE', ( #578 ), #627, .T. ) ; +#147 = EDGE_CURVE ( 'NONE', #706, #156, #577, .T. ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#149 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999900, 0.8356249999999995100, -3.000000000000000400 ) ) ; +#151 = ADVANCED_FACE ( 'NONE', ( #571 ), #568, .T. ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #947, .F. ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ; +#156 = VERTEX_POINT ( 'NONE', #4 ) ; +#157 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#158 = DIRECTION ( 'NONE', ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#160 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #84 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#162 = DIRECTION ( 'NONE', ( -1.370950816492604200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ; +#164 = ORIENTED_EDGE ( 'NONE', *, *, #728, .F. ) ; +#165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#166 = EDGE_CURVE ( 'NONE', #939, #829, #570, .T. ) ; +#167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#171 = EDGE_CURVE ( 'NONE', #29, #852, #581, .T. ) ; +#172 = STYLED_ITEM ( 'NONE', ( #280 ), #191 ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#174 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#175 = VERTEX_POINT ( 'NONE', #808 ) ; +#176 = PLANE ( 'NONE', #125 ) ; +#177 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #87, #202 ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#179 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 0.1644204344883926900, 0.8906171820826315200, -1.483753186687025900 ) ) ; +#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#184 = VERTEX_POINT ( 'NONE', #724 ) ; +#185 = SURFACE_STYLE_USAGE ( .BOTH. , #228 ) ; +#186 = EDGE_CURVE ( 'NONE', #142, #347, #562, .T. ) ; +#187 = AXIS2_PLACEMENT_3D ( 'NONE', #804, #634, #162 ) ; +#188 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #196, #190 ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ; +#190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#191 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_2', ( #476, #462 ), #100 ) ; +#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#193 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #84 ), #239 ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.02172755346967101100, 0.9086645110077499200, -1.341070851559779800 ) ) ; +#195 = VERTEX_POINT ( 'NONE', #696 ) ; +#196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#197 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#198 = CARTESIAN_POINT ( 'NONE', ( -0.1486664976559613200, 0.8939971990083345200, -1.431977152334762900 ) ) ; +#199 = EDGE_CURVE ( 'NONE', #175, #96, #564, .T. ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ; +#201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#202 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#203 = ADVANCED_FACE ( 'NONE', ( #565 ), #549, .T. ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#205 = EDGE_CURVE ( 'NONE', #791, #184, #550, .T. ) ; +#206 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #172 ) ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #760, .F. ) ; +#208 = VERTEX_POINT ( 'NONE', #424 ) ; +#209 = ADVANCED_FACE ( 'NONE', ( #555 ), #539, .T. ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ; +#213 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#214 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #222, #165 ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#216 = PLANE ( 'NONE', #928 ) ; +#217 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #272 ) ; +#218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ; +#222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#224 = EDGE_CURVE ( 'NONE', #952, #756, #545, .T. ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#226 = AXIS2_PLACEMENT_3D ( 'NONE', #635, #167, #726 ) ; +#227 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#228 = SURFACE_SIDE_STYLE ('',( #473 ) ) ; +#229 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#230 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #145, #141 ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#234 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 0.1569997460273125400, 0.8922583492056802600, -1.452031913512531700 ) ) ; +#238 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ; +#239 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #406 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #729, #387, #1 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#240 = EDGE_CURVE ( 'NONE', #29, #96, #548, .T. ) ; +#241 = EDGE_LOOP ( 'NONE', ( #683, #872, #882, #938 ) ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ; +#243 = ORIENTED_EDGE ( 'NONE', *, *, #484, .F. ) ; +#244 = EDGE_CURVE ( 'NONE', #29, #841, #579, .T. ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#246 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #172 ), #293 ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#248 = AXIS2_PLACEMENT_3D ( 'NONE', #452, #456, #717 ) ; +#249 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( -0.01068973362340016800, 0.9089055585831014000, -1.339990935699883800 ) ) ; +#252 = EDGE_CURVE ( 'NONE', #747, #936, #537, .T. ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( -0.1601231443816663600, 0.8915719896986321600, -1.462272985395308700 ) ) ; +#254 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #2, #897 ) ; +#255 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ; +#256 = ADVANCED_FACE ( 'NONE', ( #532, #529 ), #520, .T. ) ; +#257 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#260 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#261 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#262 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #98, #92 ) ; +#263 = ADVANCED_FACE ( 'NONE', ( #524 ), #664, .T. ) ; +#264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#265 = PLANE ( 'NONE', #65 ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#267 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#268 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #54 ); +#269 = DIRECTION ( 'NONE', ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#270 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.208330889770546000E-016, 0.0000000000000000000 ) ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ; +#272 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#274 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#276 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #108, 'distance_accuracy_value', 'NONE'); +#277 = AXIS2_PLACEMENT_3D ( 'NONE', #204, #783, #260 ) ; +#278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#280 = PRESENTATION_STYLE_ASSIGNMENT (( #451 ) ) ; +#281 = PLANE ( 'NONE', #254 ) ; +#282 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#284 = EDGE_CURVE ( 'NONE', #839, #175, #522, .T. ) ; +#285 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #274, 'design' ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#287 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ; +#288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ; +#290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#292 = EDGE_CURVE ( 'NONE', #573, #184, #521, .T. ) ; +#293 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #137 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #528, #111, #626 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#294 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#298 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #969 ); +#299 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ; +#300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#301 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #28, #27 ) ; +#302 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 0.1436005536913934900, 0.8950191934951699000, -1.422519181586778800 ) ) ; +#306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#307 = FILL_AREA_STYLE ('',( #469 ) ) ; +#308 = CYLINDRICAL_SURFACE ( 'NONE', #132, 0.5875000000000001300 ) ; +#309 = SHAPE_DEFINITION_REPRESENTATION ( #6, #191 ) ; +#310 = FACE_OUTER_BOUND ( 'NONE', #949, .T. ) ; +#311 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ; +#312 = EDGE_CURVE ( 'NONE', #747, #757, #518, .T. ) ; +#313 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #641, #170 ) ; +#314 = SURFACE_STYLE_FILL_AREA ( #357 ) ; +#315 = LINE ( 'NONE', #798, #321 ) ; +#316 = AXIS2_PLACEMENT_3D ( 'NONE', #41, #35, #33 ) ; +#317 = CIRCLE ( 'NONE', #845, 0.8999999999999999100 ) ; +#318 = FACE_OUTER_BOUND ( 'NONE', #680, .T. ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ; +#320 = VERTEX_POINT ( 'NONE', #525 ) ; +#321 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ; +#322 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#323 = VECTOR ( 'NONE', #44, 39.37007874015748100 ) ; +#324 = VECTOR ( 'NONE', #261, 39.37007874015748100 ) ; +#325 = LINE ( 'NONE', #511, #324 ) ; +#326 = LINE ( 'NONE', #873, #328 ) ; +#327 = AXIS2_PLACEMENT_3D ( 'NONE', #789, #264, #875 ) ; +#328 = VECTOR ( 'NONE', #343, 39.37007874015748100 ) ; +#329 = VECTOR ( 'NONE', #866, 39.37007874015748100 ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( -0.04294414358913817300, 0.9077458242970448700, -1.345301919354580100 ) ) ; +#331 = FACE_OUTER_BOUND ( 'NONE', #762, .T. ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007600, 0.8903699539794776000, -1.494531313619976700 ) ) ; +#334 = EDGE_CURVE ( 'NONE', #936, #863, #513, .T. ) ; +#335 = ADVANCED_FACE ( 'NONE', ( #514 ), #497, .F. ) ; +#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#337 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#338 = LINE ( 'NONE', #606, #329 ) ; +#339 = LINE ( 'NONE', #959, #323 ) ; +#340 = ADVANCED_FACE ( 'NONE', ( #503 ), #494, .F. ) ; +#341 = EDGE_CURVE ( 'NONE', #573, #691, #502, .T. ) ; +#342 = VECTOR ( 'NONE', #393, 39.37007874015748100 ) ; +#343 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#344 = LINE ( 'NONE', #746, #342 ) ; +#345 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#346 = LINE ( 'NONE', #34, #350 ) ; +#347 = VERTEX_POINT ( 'NONE', #917 ) ; +#348 = CIRCLE ( 'NONE', #431, 0.5875000000000001300 ) ; +#349 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#350 = VECTOR ( 'NONE', #598, 39.37007874015748100 ) ; +#351 = ADVANCED_FACE ( 'NONE', ( #499 ), #490, .F. ) ; +#352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ; +#354 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #364, #337 ) ; +#355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#356 = VECTOR ( 'NONE', #825, 39.37007874015748100 ) ; +#357 = FILL_AREA_STYLE ('',( #885 ) ) ; +#358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #561, #124, #180, #749, #237, #834, #305, #923, #400, #458, #495, #86, #592, #138, #686, #194, #773, #251, #860, #330, #945, #425, #31, #501, #88, #596, #140, #689, #198, #778, #253, #862, #333, #951 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008237336438414783900, 0.001647467287682956800, 0.002471200931524435100, 0.003294934575365913600, 0.004118668219207391600, 0.004942401863048870100, 0.005766135506890348600, 0.006589869150731827100, 0.007413602794573305600, 0.008237336438414783300, 0.009061070082256261800, 0.009884803726097740300, 0.01070853736993921900, 0.01153227101378069700, 0.01235600465762217600, 0.01317973830146365400 ), + .UNSPECIFIED. ) ; +#359 = VECTOR ( 'NONE', #297, 39.37007874015748100 ) ; +#360 = CYLINDRICAL_SURFACE ( 'NONE', #542, 0.8000000000000000400 ) ; +#361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#362 = LINE ( 'NONE', #378, #359 ) ; +#363 = LINE ( 'NONE', #233, #356 ) ; +#364 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#365 = FACE_OUTER_BOUND ( 'NONE', #766, .T. ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#367 = FACE_OUTER_BOUND ( 'NONE', #770, .T. ) ; +#368 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.8903699539794776000, -1.000000000000000200 ) ) ; +#370 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#371 = EDGE_CURVE ( 'NONE', #573, #952, #496, .T. ) ; +#372 = AXIS2_PLACEMENT_3D ( 'NONE', #735, #232, #821 ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000009500, 0.8903699539794776000, -3.000000000000000400 ) ) ; +#374 = VECTOR ( 'NONE', #909, 39.37007874015748100 ) ; +#375 = FACE_OUTER_BOUND ( 'NONE', #765, .T. ) ; +#376 = LINE ( 'NONE', #8, #374 ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#379 = VECTOR ( 'NONE', #290, 39.37007874015748100 ) ; +#380 = CIRCLE ( 'NONE', #313, 0.7482017767938234900 ) ; +#381 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #192, #90 ) ; +#382 = VECTOR ( 'NONE', #227, 39.37007874015748100 ) ; +#383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#385 = LINE ( 'NONE', #720, #382 ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( -0.3419776119402986300, 0.4777107523717784600, -3.000000000000000400 ) ) ; +#386 = VERTEX_POINT ( 'NONE', #474 ) ; +#387 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#388 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#389 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#392 = CIRCLE ( 'NONE', #372, 0.2500000000000001100 ) ; +#393 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#394 = LINE ( 'NONE', #229, #379 ) ; +#395 = CIRCLE ( 'NONE', #226, 0.2500000000000001100 ) ; +#396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#397 = FACE_OUTER_BOUND ( 'NONE', #777, .T. ) ; +#398 = LINE ( 'NONE', #366, #403 ) ; +#399 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 0.1246321506638823400, 0.8984903836471271900, -1.396079798429413300 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#402 = FACE_OUTER_BOUND ( 'NONE', #879, .T. ) ; +#403 = VECTOR ( 'NONE', #889, 39.37007874015748100 ) ; +#404 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#405 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ; +#406 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #729, 'distance_accuracy_value', 'NONE'); +#407 = EDGE_CURVE ( 'NONE', #852, #175, #491, .T. ) ; +#408 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ; +#409 = CIRCLE ( 'NONE', #5, 0.7482017767938234900 ) ; +#410 = VECTOR ( 'NONE', #158, 39.37007874015748100 ) ; +#411 = LINE ( 'NONE', #449, #410 ) ; +#412 = LINE ( 'NONE', #109, #418 ) ; +#413 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ; +#414 = EDGE_CURVE ( 'NONE', #691, #611, #489, .T. ) ; +#415 = CYLINDRICAL_SURFACE ( 'NONE', #861, 0.8000000000000000400 ) ; +#416 = CLOSED_SHELL ( 'NONE', ( #440, #955, #870, #256, #796, #876, #701, #785, #693, #263, #600, #516, #436, #705, #203, #103, #613, #151, #335, #43, #146, #340, #209, #510, #351, #99, #36, #960 ) ) ; +#417 = CIRCLE ( 'NONE', #755, 0.1574999999999998900 ) ; +#418 = VECTOR ( 'NONE', #712, 39.37007874015748100 ) ; +#419 = VECTOR ( 'NONE', #355, 39.37007874015748100 ) ; +#420 = FACE_OUTER_BOUND ( 'NONE', #854, .T. ) ; +#421 = VECTOR ( 'NONE', #617, 39.37007874015748100 ) ; +#422 = LINE ( 'NONE', #962, #421 ) ; +#423 = CIRCLE ( 'NONE', #633, 0.04687500000000001400 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( -2.421206997196959000E-014, 0.7373699539794775800, -1.339999999999999400 ) ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( -0.07335619563912319800, 0.9053669957282992600, -1.356747874808138700 ) ) ; +#426 = LINE ( 'NONE', #970, #419 ) ; +#427 = EDGE_CURVE ( 'NONE', #67, #939, #488, .T. ) ; +#428 = CYLINDRICAL_SURFACE ( 'NONE', #455, 0.8999999999999999100 ) ; +#429 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#430 = CIRCLE ( 'NONE', #687, 0.5875000000000001300 ) ; +#431 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #828, #303 ) ; +#432 = CIRCLE ( 'NONE', #327, 0.7482017767938234900 ) ; +#433 = CIRCLE ( 'NONE', #569, 0.2500000000000002200 ) ; +#434 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#435 = FACE_OUTER_BOUND ( 'NONE', #932, .T. ) ; +#436 = ADVANCED_FACE ( 'NONE', ( #482 ), #730, .T. ) ; +#437 = VECTOR ( 'NONE', #37, 39.37007874015748100 ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ; +#440 = ADVANCED_FACE ( 'NONE', ( #483 ), #176, .F. ) ; +#441 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#443 = FACE_OUTER_BOUND ( 'NONE', #774, .T. ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#445 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ; +#446 = LINE ( 'NONE', #655, #445 ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#448 = LINE ( 'NONE', #953, #437 ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ; +#450 = CIRCLE ( 'NONE', #277, 0.8000000000000000400 ) ; +#451 = SURFACE_STYLE_USAGE ( .BOTH. , #972 ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ; +#454 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#455 = AXIS2_PLACEMENT_3D ( 'NONE', #602, #429, #699 ) ; +#456 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999600, 0.6809919235938120000, -3.000000000000000400 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 0.1094200760253842400, 0.9008993506511299200, -1.380867739114418200 ) ) ; +#459 = EDGE_CURVE ( 'NONE', #839, #863, #480, .T. ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 0.3419776119402984600, 0.4777107523717784600, -3.000000000000000400 ) ) ; +#462 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #714, #218 ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#465 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #197 ); +#466 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ; +#469 = FILL_AREA_STYLE_COLOUR ( '', #486 ) ; +#470 = AXIS2_PLACEMENT_3D ( 'NONE', #468, #306, #126 ) ; +#471 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#473 = SURFACE_STYLE_FILL_AREA ( #307 ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#476 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #416 ) ; +#477 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#478 = EDGE_CURVE ( 'NONE', #927, #841, #446, .T. ) ; +#479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#480 = LINE ( 'NONE', #122, #493 ) ; +#481 = PRESENTATION_STYLE_ASSIGNMENT (( #185 ) ) ; +#482 = FACE_OUTER_BOUND ( 'NONE', #681, .T. ) ; +#483 = FACE_OUTER_BOUND ( 'NONE', #891, .T. ) ; +#484 = EDGE_CURVE ( 'NONE', #184, #779, #448, .T. ) ; +#485 = VECTOR ( 'NONE', #396, 39.37007874015748100 ) ; +#486 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#487 = AXIS2_PLACEMENT_3D ( 'NONE', #740, #651, #648 ) ; +#488 = LINE ( 'NONE', #925, #485 ) ; +#489 = CIRCLE ( 'NONE', #657, 0.04687499999999999300 ) ; +#490 = CYLINDRICAL_SURFACE ( 'NONE', #887, 0.7482017767938234900 ) ; +#491 = CIRCLE ( 'NONE', #711, 0.8000000000000000400 ) ; +#492 = VECTOR ( 'NONE', #133, 39.37007874015748100 ) ; +#493 = VECTOR ( 'NONE', #300, 39.37007874015748100 ) ; +#494 = CYLINDRICAL_SURFACE ( 'NONE', #831, 0.04687500000000001400 ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 0.1011131468003748600, 0.9020957037658874400, -1.374028859226739100 ) ) ; +#496 = LINE ( 'NONE', #743, #492 ) ; +#497 = CYLINDRICAL_SURFACE ( 'NONE', #768, 0.5875000000000001300 ) ; +#498 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #42, #512 ) ; +#499 = FACE_OUTER_BOUND ( 'NONE', #935, .T. ) ; +#500 = VECTOR ( 'NONE', #479, 39.37007874015748100 ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( -0.1008883795968710400, 0.9021252105212961300, -1.373865794683199400 ) ) ; +#502 = LINE ( 'NONE', #17, #500 ) ; +#503 = FACE_OUTER_BOUND ( 'NONE', #929, .T. ) ; +#504 = VECTOR ( 'NONE', #78, 39.37007874015748100 ) ; +#505 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ; +#507 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ; +#508 = EDGE_CURVE ( 'NONE', #822, #839, #450, .T. ) ; +#509 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ; +#510 = ADVANCED_FACE ( 'NONE', ( #435 ), #428, .T. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#512 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#513 = CIRCLE ( 'NONE', #585, 0.8999999999999999100 ) ; +#514 = FACE_OUTER_BOUND ( 'NONE', #832, .T. ) ; +#515 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#516 = ADVANCED_FACE ( 'NONE', ( #443 ), #958, .F. ) ; +#517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#518 = LINE ( 'NONE', #183, #504 ) ; +#519 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #582, #285 ) ; +#520 = CYLINDRICAL_SURFACE ( 'NONE', #470, 0.1574999999999998900 ) ; +#521 = CIRCLE ( 'NONE', #72, 0.2500000000000002200 ) ; +#522 = LINE ( 'NONE', #401, #538 ) ; +#523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#524 = FACE_OUTER_BOUND ( 'NONE', #843, .T. ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -1.690330946079762900E-015, 0.5453699539794775200, -1.654999999999998700 ) ) ; +#526 = AXIS2_PLACEMENT_3D ( 'NONE', #924, #566, #477 ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ; +#528 =( CONVERSION_BASED_UNIT ( 'INCH', #268 ) LENGTH_UNIT ( ) NAMED_UNIT ( #880 ) ); +#529 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ; +#530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#531 = VECTOR ( 'NONE', #666, 39.37007874015748100 ) ; +#532 = FACE_OUTER_BOUND ( 'NONE', #700, .T. ) ; +#533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#534 = EDGE_CURVE ( 'NONE', #611, #874, #432, .T. ) ; +#535 = VECTOR ( 'NONE', #60, 39.37007874015748100 ) ; +#536 = PLANE ( 'NONE', #187 ) ; +#537 = LINE ( 'NONE', #144, #531 ) ; +#538 = VECTOR ( 'NONE', #574, 39.37007874015748100 ) ; +#539 = CYLINDRICAL_SURFACE ( 'NONE', #354, 0.8999999999999999100 ) ; +#540 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ; +#541 = EDGE_CURVE ( 'NONE', #952, #779, #433, .T. ) ; +#542 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #544, #547 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#544 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#545 = LINE ( 'NONE', #159, #552 ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( -0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ; +#547 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#548 = CIRCLE ( 'NONE', #301, 0.8999999999999999100 ) ; +#549 = CYLINDRICAL_SURFACE ( 'NONE', #248, 0.8999999999999999100 ) ; +#550 = CIRCLE ( 'NONE', #214, 0.5875000000000001300 ) ; +#551 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #966, #619 ) ; +#552 = VECTOR ( 'NONE', #273, 39.37007874015748100 ) ; +#553 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#555 = FACE_OUTER_BOUND ( 'NONE', #918, .T. ) ; +#556 = VECTOR ( 'NONE', #895, 39.37007874015748100 ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ; +#562 = LINE ( 'NONE', #782, #556 ) ; +#563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#564 = LINE ( 'NONE', #607, #576 ) ; +#565 = FACE_OUTER_BOUND ( 'NONE', #807, .T. ) ; +#566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#567 = VECTOR ( 'NONE', #942, 39.37007874015748100 ) ; +#568 = CYLINDRICAL_SURFACE ( 'NONE', #177, 0.2500000000000000600 ) ; +#569 = AXIS2_PLACEMENT_3D ( 'NONE', #439, #47, #517 ) ; +#570 = CIRCLE ( 'NONE', #135, 0.8000000000000000400 ) ; +#571 = FACE_OUTER_BOUND ( 'NONE', #788, .T. ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ; +#573 = VERTEX_POINT ( 'NONE', #609 ) ; +#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#575 = EDGE_CURVE ( 'NONE', #863, #830, #422, .T. ) ; +#576 = VECTOR ( 'NONE', #454, 39.37007874015748100 ) ; +#577 = LINE ( 'NONE', #369, #587 ) ; +#578 = FACE_OUTER_BOUND ( 'NONE', #898, .T. ) ; +#579 = LINE ( 'NONE', #225, #535 ) ; +#580 = VECTOR ( 'NONE', #174, 39.37007874015748100 ) ; +#581 = LINE ( 'NONE', #279, #567 ) ; +#582 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #674, .NOT_KNOWN. ) ; +#583 = LINE ( 'NONE', #69, #580 ) ; +#584 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ; +#585 = AXIS2_PLACEMENT_3D ( 'NONE', #713, #48, #46 ) ; +#586 = VECTOR ( 'NONE', #169, 39.37007874015748100 ) ; +#587 = VECTOR ( 'NONE', #283, 39.37007874015748100 ) ; +#588 = CIRCLE ( 'NONE', #794, 0.8000000000000000400 ) ; +#589 = CYLINDRICAL_SURFACE ( 'NONE', #965, 0.04687499999999999300 ) ; +#590 = LINE ( 'NONE', #377, #594 ) ; +#591 = CYLINDRICAL_SURFACE ( 'NONE', #913, 0.1655000000000001700 ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 0.07346159783481195900, 0.9053553647116803200, -1.356806724310162900 ) ) ; +#593 = EDGE_CURVE ( 'NONE', #874, #937, #423, .T. ) ; +#594 = VECTOR ( 'NONE', #383, 39.37007874015748100 ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( -0.1246537087686272600, 0.8984875672001423300, -1.396094000529339900 ) ) ; +#597 = EDGE_CURVE ( 'NONE', #790, #848, #430, .T. ) ; +#598 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#600 = ADVANCED_FACE ( 'NONE', ( #420 ), #415, .T. ) ; +#601 = LINE ( 'NONE', #304, #586 ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#603 = AXIS2_PLACEMENT_3D ( 'NONE', #464, #554, #119 ) ; +#604 = CIRCLE ( 'NONE', #850, 0.8999999999999999100 ) ; +#605 = FACE_OUTER_BOUND ( 'NONE', #890, .T. ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#608 = CIRCLE ( 'NONE', #738, 0.04687500000000001400 ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#610 = VECTOR ( 'NONE', #14, 39.37007874015748100 ) ; +#611 = VERTEX_POINT ( 'NONE', #155 ) ; +#612 = FACE_OUTER_BOUND ( 'NONE', #884, .T. ) ; +#613 = ADVANCED_FACE ( 'NONE', ( #413 ), #216, .T. ) ; +#614 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ; +#615 = LINE ( 'NONE', #296, #610 ) ; +#616 = AXIS2_PLACEMENT_3D ( 'NONE', #745, #732, #663 ) ; +#617 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#620 = VECTOR ( 'NONE', #121, 39.37007874015748100 ) ; +#621 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#622 = LINE ( 'NONE', #558, #620 ) ; +#623 = LINE ( 'NONE', #178, #643 ) ; +#624 = VECTOR ( 'NONE', #302, 39.37007874015748100 ) ; +#625 = CIRCLE ( 'NONE', #487, 0.8999999999999999100 ) ; +#626 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#627 = PLANE ( 'NONE', #105 ) ; +#628 = LINE ( 'NONE', #235, #624 ) ; +#629 = PLANE ( 'NONE', #114 ) ; +#630 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ; +#631 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ; +#632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#633 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #877, #352 ) ; +#634 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.370950816492604200E-016 ) ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#636 = LINE ( 'NONE', #827, #630 ) ; +#637 = CYLINDRICAL_SURFACE ( 'NONE', #676, 0.2500000000000001100 ) ; +#638 = EDGE_CURVE ( 'NONE', #195, #830, #426, .T. ) ; +#639 = CIRCLE ( 'NONE', #616, 0.1655000000000001700 ) ; +#640 = CARTESIAN_POINT ( 'NONE', ( -5.463695987328526400E-016, 1.060741146872564000, -1.505499999999999600 ) ) ; +#641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#642 = LINE ( 'NONE', #543, #646 ) ; +#643 = VECTOR ( 'NONE', #294, 39.37007874015748100 ) ; +#644 = LINE ( 'NONE', #211, #658 ) ; +#645 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ; +#646 = VECTOR ( 'NONE', #833, 39.37007874015748100 ) ; +#647 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #674 ) ) ; +#648 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#650 = FACE_OUTER_BOUND ( 'NONE', #919, .T. ) ; +#651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#653 = FACE_OUTER_BOUND ( 'NONE', #954, .T. ) ; +#654 = CIRCLE ( 'NONE', #381, 0.04687499999999999300 ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#656 = VECTOR ( 'NONE', #136, 39.37007874015748100 ) ; +#657 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #812, #288 ) ; +#658 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ; +#659 = LINE ( 'NONE', #134, #656 ) ; +#660 = VERTEX_POINT ( 'NONE', #53 ) ; +#661 = CIRCLE ( 'NONE', #262, 0.1574999999999998900 ) ; +#662 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ; +#663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#664 = PLANE ( 'NONE', #526 ) ; +#665 = EDGE_CURVE ( 'NONE', #937, #739, #411, .T. ) ; +#666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#667 = CIRCLE ( 'NONE', #316, 0.1655000000000001700 ) ; +#668 = VECTOR ( 'NONE', #249, 39.37007874015748100 ) ; +#669 = EDGE_CURVE ( 'NONE', #757, #939, #412, .T. ) ; +#670 = LINE ( 'NONE', #247, #668 ) ; +#671 = CIRCLE ( 'NONE', #188, 0.5875000000000001300 ) ; +#672 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ; +#673 = LINE ( 'NONE', #319, #672 ) ; +#674 = PRODUCT ( 'Trellais_Base_2', 'Trellais_Base_2', '', ( #802 ) ) ; +#675 = ORIENTED_EDGE ( 'NONE', *, *, #760, .T. ) ; +#676 = AXIS2_PLACEMENT_3D ( 'NONE', #442, #106, #515 ) ; +#677 = CIRCLE ( 'NONE', #230, 0.8999999999999999100 ) ; +#678 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #780, .T. ) ; +#680 = EDGE_LOOP ( 'NONE', ( #776, #899, #792, #460, #849, #915, #97, #332, #744, #694, #540, #692 ) ) ; +#681 = EDGE_LOOP ( 'NONE', ( #242, #737, #721, #857 ) ) ; +#682 = EDGE_CURVE ( 'NONE', #320, #320, #417, .T. ) ; +#683 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ; +#684 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ; +#685 = EDGE_CURVE ( 'NONE', #751, #763, #409, .T. ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 0.04310274982936467700, 0.9077375800253002500, -1.345340128641096600 ) ) ; +#687 = AXIS2_PLACEMENT_3D ( 'NONE', #52, #523, #107 ) ; +#688 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -0.1434656637721816700, 0.8950454831143117600, -1.422291100029821300 ) ) ; +#690 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ; +#691 = VERTEX_POINT ( 'NONE', #527 ) ; +#692 = ORIENTED_EDGE ( 'NONE', *, *, #926, .F. ) ; +#693 = ADVANCED_FACE ( 'NONE', ( #408 ), #629, .F. ) ; +#694 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#697 = EDGE_CURVE ( 'NONE', #900, #115, #398, .T. ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ; +#699 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#700 = EDGE_LOOP ( 'NONE', ( #690 ) ) ; +#701 = ADVANCED_FACE ( 'NONE', ( #397 ), #536, .F. ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#703 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ; +#704 = ORIENTED_EDGE ( 'NONE', *, *, #869, .T. ) ; +#705 = ADVANCED_FACE ( 'NONE', ( #402 ), #281, .T. ) ; +#706 = VERTEX_POINT ( 'NONE', #58 ) ; +#707 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ; +#708 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ; +#709 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ; +#711 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #71, #120 ) ; +#712 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ; +#714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#717 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#718 = EDGE_CURVE ( 'NONE', #864, #739, #395, .T. ) ; +#719 = VERTEX_POINT ( 'NONE', #457 ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ; +#721 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ; +#722 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ; +#723 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ; +#725 = EDGE_LOOP ( 'NONE', ( #257 ) ) ; +#726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#727 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ; +#728 = EDGE_CURVE ( 'NONE', #864, #790, #385, .T. ) ; +#729 =( CONVERSION_BASED_UNIT ( 'INCH', #465 ) LENGTH_UNIT ( ) NAMED_UNIT ( #267 ) ); +#730 = PLANE ( 'NONE', #55 ) ; +#731 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ; +#732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( -0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ; +#736 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ; +#737 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ; +#738 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #475, #471 ) ; +#739 = VERTEX_POINT ( 'NONE', #370 ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#741 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ; +#742 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#744 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#747 = VERTEX_POINT ( 'NONE', #286 ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ; +#748 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 0.1601970945664288300, 0.8915557081971854400, -1.462559412450504400 ) ) ; +#750 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ; +#751 = VERTEX_POINT ( 'NONE', #373 ) ; +#752 = EDGE_CURVE ( 'NONE', #59, #706, #380, .T. ) ; +#753 = VERTEX_POINT ( 'NONE', #811 ) ; +#754 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ; +#755 = AXIS2_PLACEMENT_3D ( 'NONE', #453, #56, #530 ) ; +#756 = VERTEX_POINT ( 'NONE', #901 ) ; +#757 = VERTEX_POINT ( 'NONE', #733 ) ; +#758 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ; +#759 = ORIENTED_EDGE ( 'NONE', *, *, #244, .T. ) ; +#760 = EDGE_CURVE ( 'NONE', #851, #751, #394, .T. ) ; +#761 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ; +#762 = EDGE_LOOP ( 'NONE', ( #946 ) ) ; +#763 = VERTEX_POINT ( 'NONE', #816 ) ; +#764 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#765 = EDGE_LOOP ( 'NONE', ( #974, #723, #727, #678 ) ) ; +#766 = EDGE_LOOP ( 'NONE', ( #817, #914, #801, #805, #709, #353 ) ) ; +#767 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ; +#768 = AXIS2_PLACEMENT_3D ( 'NONE', #826, #234, #389 ) ; +#769 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ; +#770 = EDGE_LOOP ( 'NONE', ( #800, #797, #809, #844 ) ) ; +#771 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ; +#772 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 0.01096858461318989600, 0.9089015226106074200, -1.340009181759160600 ) ) ; +#774 = EDGE_LOOP ( 'NONE', ( #820, #835, #836, #722 ) ) ; +#775 = EDGE_CURVE ( 'NONE', #848, #927, #376, .T. ) ; +#776 = ORIENTED_EDGE ( 'NONE', *, *, #775, .T. ) ; +#777 = EDGE_LOOP ( 'NONE', ( #704, #207, #698, #771 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( -0.1569740449793527400, 0.8922638404417874100, -1.451960427187773100 ) ) ; +#779 = VERTEX_POINT ( 'NONE', #461 ) ; +#780 = EDGE_CURVE ( 'NONE', #790, #719, #392, .T. ) ; +#781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#784 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #201, #781 ) ; +#785 = ADVANCED_FACE ( 'NONE', ( #367 ), #360, .T. ) ; +#786 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#788 = EDGE_LOOP ( 'NONE', ( #679, #123, #847, #7 ) ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#790 = VERTEX_POINT ( 'NONE', #384 ) ; +#791 = VERTEX_POINT ( 'NONE', #11 ) ; +#792 = ORIENTED_EDGE ( 'NONE', *, *, #244, .F. ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.6809919235938120000, -3.000000000000000400 ) ) ; +#794 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #63, #16 ) ; +#795 = ORIENTED_EDGE ( 'NONE', *, *, #947, .T. ) ; +#796 = ADVANCED_FACE ( 'NONE', ( #365 ), #911, .T. ) ; +#797 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( -0.2374999999999998200, -5.244785863205042700E-017, -3.000000000000000400 ) ) ; +#799 = ORIENTED_EDGE ( 'NONE', *, *, #859, .T. ) ; +#800 = ORIENTED_EDGE ( 'NONE', *, *, #284, .F. ) ; +#801 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ; +#802 = PRODUCT_CONTEXT ( 'NONE', #272, 'mechanical' ) ; +#803 = VERTEX_POINT ( 'NONE', #649 ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#805 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ; +#806 = EDGE_CURVE ( 'NONE', #936, #822, #363, .T. ) ; +#807 = EDGE_LOOP ( 'NONE', ( #948, #943, #950, #964 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#809 = ORIENTED_EDGE ( 'NONE', *, *, #903, .F. ) ; +#810 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#813 = EDGE_CURVE ( 'NONE', #829, #195, #362, .T. ) ; +#814 = ORIENTED_EDGE ( 'NONE', *, *, #926, .T. ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( -0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ; +#817 = ORIENTED_EDGE ( 'NONE', *, *, #26, .T. ) ; +#818 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#819 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ; +#820 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ; +#821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#822 = VERTEX_POINT ( 'NONE', #70 ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#825 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#829 = VERTEX_POINT ( 'NONE', #467 ) ; +#830 = VERTEX_POINT ( 'NONE', #390 ) ; +#831 = AXIS2_PLACEMENT_3D ( 'NONE', #295, #748, #179 ) ; +#832 = EDGE_LOOP ( 'NONE', ( #32, #130, #164, #189 ) ) ; +#833 = DIRECTION ( 'NONE', ( -1.370950816492604000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 0.1486841504824485100, 0.8939936438474120900, -1.432010001220678700 ) ) ; +#835 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ; +#836 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ; +#837 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ; +#838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#839 = VERTEX_POINT ( 'NONE', #74 ) ; +#840 = EDGE_CURVE ( 'NONE', #864, #927, #348, .T. ) ; +#841 = VERTEX_POINT ( 'NONE', #13 ) ; +#842 = EDGE_CURVE ( 'NONE', #739, #719, #344, .T. ) ; +#843 = EDGE_LOOP ( 'NONE', ( #853, #855, #856, #764 ) ) ; +#844 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#845 = AXIS2_PLACEMENT_3D ( 'NONE', #963, #441, #50 ) ; +#846 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #718, .F. ) ; +#848 = VERTEX_POINT ( 'NONE', #652 ) ; +#849 = ORIENTED_EDGE ( 'NONE', *, *, #903, .T. ) ; +#850 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #973, #632 ) ; +#851 = VERTEX_POINT ( 'NONE', #920 ) ; +#852 = VERTEX_POINT ( 'NONE', #15 ) ; +#853 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#854 = EDGE_LOOP ( 'NONE', ( #767, #761, #741, #710 ) ) ; +#855 = ORIENTED_EDGE ( 'NONE', *, *, #240, .T. ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #199, .F. ) ; +#857 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ; +#858 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ; +#859 = EDGE_CURVE ( 'NONE', #156, #115, #358, .T. ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( -0.02169339886360440200, 0.9086646133200405600, -1.341070620153132200 ) ) ; +#861 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #149, #345 ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( -0.1643964897245952800, 0.8906226517141285800, -1.483550277347146300 ) ) ; +#863 = VERTEX_POINT ( 'NONE', #76 ) ; +#864 = VERTEX_POINT ( 'NONE', #472 ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#866 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#867 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ; +#869 = EDGE_CURVE ( 'NONE', #115, #751, #346, .T. ) ; +#870 = ADVANCED_FACE ( 'NONE', ( #331 ), #91, .T. ) ; +#871 = EDGE_LOOP ( 'NONE', ( #750, #20, #49, #68 ) ) ; +#872 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#874 = VERTEX_POINT ( 'NONE', #506 ) ; +#875 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#876 = ADVANCED_FACE ( 'NONE', ( #375 ), #957, .F. ) ; +#877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #484, .T. ) ; +#879 = EDGE_LOOP ( 'NONE', ( #823, #795, #933, #902, #941, #940, #868, #904, #819, #758, #129, #961 ) ) ; +#880 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ; +#881 = DIRECTION ( 'NONE', ( -2.208330889770546000E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#882 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#884 = EDGE_LOOP ( 'NONE', ( #799, #662, #754, #888, #772 ) ) ; +#885 = FILL_AREA_STYLE_COLOUR ( '', #282 ) ; +#886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#887 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #404, #466 ) ; +#888 = ORIENTED_EDGE ( 'NONE', *, *, #26, .F. ) ; +#889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#890 = EDGE_LOOP ( 'NONE', ( #968, #117, #85, #24 ) ) ; +#891 = EDGE_LOOP ( 'NONE', ( #865, #708, #786, #684, #921, #916, #910, #906, #922, #930, #110, #707 ) ) ; +#892 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #274 ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#894 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#896 = EDGE_CURVE ( 'NONE', #753, #791, #338, .T. ) ; +#897 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#898 = EDGE_LOOP ( 'NONE', ( #287, #299, #311, #368 ) ) ; +#899 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ; +#900 = VERTEX_POINT ( 'NONE', #695 ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 0.2374999999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ; +#902 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ; +#903 = EDGE_CURVE ( 'NONE', #852, #822, #325, .T. ) ; +#904 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ; +#905 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ; +#906 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #240, .F. ) ; +#908 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #434, #38 ) ; +#910 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ; +#909 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#911 = PLANE ( 'NONE', #603 ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ; +#913 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #73, #560 ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ; +#915 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ; +#918 = EDGE_LOOP ( 'NONE', ( #595, #858, #584, #572 ) ) ; +#919 = EDGE_LOOP ( 'NONE', ( #221, #243, #255, #271 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ; +#921 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ; +#922 = ORIENTED_EDGE ( 'NONE', *, *, #284, .T. ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 0.1315959633413563700, 0.8972652091767202600, -1.404557255450115800 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ; +#926 = EDGE_CURVE ( 'NONE', #848, #660, #326, .T. ) ; +#927 = VERTEX_POINT ( 'NONE', #787 ) ; +#928 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #270, #881 ) ; +#929 = EDGE_LOOP ( 'NONE', ( #388, #405, #631, #505 ) ) ; +#930 = ORIENTED_EDGE ( 'NONE', *, *, #199, .T. ) ; +#931 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ; +#932 = EDGE_LOOP ( 'NONE', ( #152, #82, #907, #759 ) ) ; +#933 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ; +#934 = EDGE_CURVE ( 'NONE', #803, #21, #339, .T. ) ; +#935 = EDGE_LOOP ( 'NONE', ( #971, #77, #905, #509, #731, #163, #614, #128 ) ) ; +#936 = VERTEX_POINT ( 'NONE', #438 ) ; +#937 = VERTEX_POINT ( 'NONE', #101 ) ; +#938 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ; +#939 = VERTEX_POINT ( 'NONE', #702 ) ; +#940 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ; +#941 = ORIENTED_EDGE ( 'NONE', *, *, #718, .T. ) ; +#942 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#943 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ; +#944 = VERTEX_POINT ( 'NONE', #150 ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( -0.05327696250579244000, 0.9070723181441187100, -1.348433480799067900 ) ) ; +#946 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ; +#947 = EDGE_CURVE ( 'NONE', #753, #841, #317, .T. ) ; +#948 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ; +#949 = EDGE_LOOP ( 'NONE', ( #818, #238, #878, #736 ) ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ; +#952 = VERTEX_POINT ( 'NONE', #793 ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ; +#954 = EDGE_LOOP ( 'NONE', ( #703, #94, #846, #837, #250, #883, #742, #645, #931, #675, #507, #967, #769, #688, #79, #814 ) ) ; +#955 = ADVANCED_FACE ( 'NONE', ( #318 ), #265, .F. ) ; +#956 = EDGE_CURVE ( 'NONE', #944, #719, #315, .T. ) ; +#957 = PLANE ( 'NONE', #908 ) ; +#958 = PLANE ( 'NONE', #498 ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ; +#960 = ADVANCED_FACE ( 'NONE', ( #310 ), #308, .F. ) ; +#961 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ; +#964 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ; +#965 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #399, #838 ) ; +#966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#967 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ; +#969 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) ); +#970 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #859, .F. ) ; +#972 = SURFACE_SIDE_STYLE ('',( #314 ) ) ; +#973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_1.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_1.step new file mode 100644 index 0000000..7ec3be0 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_1.step @@ -0,0 +1,2819 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Clamp_1.step', + '2016-04-19T10:44:29', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, -31.75000000000000700, 6.349999999999994300 ) ) ; +#2 = EDGE_LOOP ( 'NONE', ( #2255, #1034, #122, #968 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427368400, 25.39999999999999900, -25.39999999999999900 ) ) ; +#4 = EDGE_CURVE ( 'NONE', #347, #2160, #2446, .T. ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, 31.65399872081853900, -20.15000000000003100 ) ) ; +#6 = ORIENTED_EDGE ( 'NONE', *, *, #2220, .F. ) ; +#7 = FACE_OUTER_BOUND ( 'NONE', #495, .T. ) ; +#8 = ADVANCED_FACE ( 'NONE', ( #249, #1314 ), #1253, .F. ) ; +#9 = ORIENTED_EDGE ( 'NONE', *, *, #592, .T. ) ; +#10 = CYLINDRICAL_SURFACE ( 'NONE', #2662, 1.750000000000001100 ) ; +#11 = EDGE_LOOP ( 'NONE', ( #2200, #1734, #692, #254, #2028 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, -25.40000000000000600, 12.69999999999999900 ) ) ; +#13 = AXIS2_PLACEMENT_3D ( 'NONE', #1320, #246, #2391 ) ; +#14 = LINE ( 'NONE', #955, #1160 ) ; +#15 = ORIENTED_EDGE ( 'NONE', *, *, #2021, .T. ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.75000000000000700, 6.349999999999994300 ) ) ; +#17 = LINE ( 'NONE', #1639, #1101 ) ; +#18 = ORIENTED_EDGE ( 'NONE', *, *, #802, .F. ) ; +#19 = VERTEX_POINT ( 'NONE', #704 ) ; +#20 = VERTEX_POINT ( 'NONE', #478 ) ; +#21 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #2493 ), #160 ) ; +#22 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#23 = ADVANCED_FACE ( 'NONE', ( #1826, #2393, #179 ), #270, .F. ) ; +#24 = PLANE ( 'NONE', #1942 ) ; +#25 = EDGE_CURVE ( 'NONE', #311, #68, #2329, .T. ) ; +#26 = EDGE_CURVE ( 'NONE', #2305, #2092, #770, .T. ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #1812, #540, #2030 ) ; +#28 = DIRECTION ( 'NONE', ( -0.3659981507706706600, -0.7848855672213944600, 0.4999999999999994400 ) ) ; +#29 = EDGE_LOOP ( 'NONE', ( #1398 ) ) ; +#30 = ADVANCED_FACE ( 'NONE', ( #113, #1756 ), #1130, .F. ) ; +#31 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .F. ) ; +#32 = FACE_OUTER_BOUND ( 'NONE', #2206, .T. ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720608300, -21.67739658924496400, -14.54999999999998500 ) ) ; +#34 = VERTEX_POINT ( 'NONE', #442 ) ; +#35 = EDGE_CURVE ( 'NONE', #2486, #2486, #41, .T. ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( -34.55856746437218200, -18.38684072435551200, 4.650000000000001200 ) ) ; +#37 = LINE ( 'NONE', #1766, #2322 ) ; +#38 = LINE ( 'NONE', #2224, #2264 ) ; +#39 = EDGE_LOOP ( 'NONE', ( #457 ) ) ; +#40 = VECTOR ( 'NONE', #155, 1000.000000000000100 ) ; +#41 = CIRCLE ( 'NONE', #596, 1.750000000000002400 ) ; +#42 = VECTOR ( 'NONE', #1764, 1000.000000000000000 ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #189, .T. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, -3.002671082198546400E-015 ) ) ; +#45 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46 = VECTOR ( 'NONE', #754, 1000.000000000000100 ) ; +#47 = VECTOR ( 'NONE', #71, 1000.000000000000000 ) ; +#48 = ORIENTED_EDGE ( 'NONE', *, *, #1265, .F. ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( -41.19258710443459400, -21.90665156908910700, 1.411869291362268400 ) ) ; +#50 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .T. ) ; +#51 = ADVANCED_FACE ( 'NONE', ( #2268 ), #439, .T. ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( -10.33107732308851500, -24.72855494203896900, 2.649999999999999500 ) ) ; +#53 = VERTEX_POINT ( 'NONE', #210 ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166956900, -15.34999999999999800 ) ) ; +#55 = EDGE_CURVE ( 'NONE', #19, #1102, #1696, .T. ) ; +#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 9.725424424388032600E-015 ) ) ; +#57 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#58 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, 7.450000000000002000 ) ) ; +#59 = EDGE_CURVE ( 'NONE', #1157, #2372, #630, .T. ) ; +#60 = ADVANCED_FACE ( 'NONE', ( #2693 ), #1938, .T. ) ; +#61 = AXIS2_PLACEMENT_3D ( 'NONE', #2686, #1473, #1251 ) ; +#62 = DIRECTION ( 'NONE', ( -2.891671490101912600E-049, -6.201209522363663400E-049, -1.000000000000000000 ) ) ; +#63 = ORIENTED_EDGE ( 'NONE', *, *, #2409, .F. ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( -5.959332801240171800, -21.26882251811673900, -15.35000000000001900 ) ) ; +#65 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #1265, .T. ) ; +#68 = VERTEX_POINT ( 'NONE', #1513 ) ; +#69 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2463, #995, #1412, #129 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 3.315699287014422400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670601100, 0.9974755015670601100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#70 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, -20.74688556425414600, -3.002671082198546400E-015 ) ) ; +#71 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72 = LINE ( 'NONE', #2652, #2357 ) ; +#73 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .T. ) ; +#74 = DIRECTION ( 'NONE', ( 6.124977852475733400E-017, -8.366254228761938800E-033, -1.000000000000000000 ) ) ; +#75 = EDGE_CURVE ( 'NONE', #1637, #347, #1068, .T. ) ; +#76 = VECTOR ( 'NONE', #1644, 1000.000000000000000 ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -0.1499999999999834800 ) ) ; +#79 = CIRCLE ( 'NONE', #2332, 1.749999999999999100 ) ; +#80 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .T. ) ; +#81 = FACE_OUTER_BOUND ( 'NONE', #1930, .T. ) ; +#82 = EDGE_LOOP ( 'NONE', ( #1759, #718, #741, #2048 ) ) ; +#83 = AXIS2_PLACEMENT_3D ( 'NONE', #1846, #796, #2284 ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, 31.75000000000000700, -19.04999999999999700 ) ) ; +#85 = EDGE_LOOP ( 'NONE', ( #431, #2646, #2697, #678 ) ) ; +#86 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, 7.450000000000002000 ) ) ; +#88 = ORIENTED_EDGE ( 'NONE', *, *, #26, .F. ) ; +#89 = VERTEX_POINT ( 'NONE', #1322 ) ; +#90 = DIRECTION ( 'NONE', ( -4.535039887899871300E-015, 9.725424424388045300E-015, -1.000000000000000000 ) ) ; +#91 = DIRECTION ( 'NONE', ( 6.124977852475733400E-017, -8.366254228761938800E-033, -1.000000000000000000 ) ) ; +#92 = PLANE ( 'NONE', #872 ) ; +#93 = EDGE_CURVE ( 'NONE', #566, #1290, #2675, .T. ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831786700, -20.21227686376496600, 2.650000000000001200 ) ) ; +#95 = AXIS2_PLACEMENT_3D ( 'NONE', #711, #1111, #717 ) ; +#96 = PLANE ( 'NONE', #2632 ) ; +#97 = AXIS2_PLACEMENT_3D ( 'NONE', #984, #990, #2461 ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#99 = PLANE ( 'NONE', #1436 ) ; +#100 = ORIENTED_EDGE ( 'NONE', *, *, #1374, .F. ) ; +#101 = DIRECTION ( 'NONE', ( -0.4226182617407035500, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#102 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .F. ) ; +#103 = FACE_OUTER_BOUND ( 'NONE', #135, .T. ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -9.591495365042289800, -23.14251631472483700, -15.34999999999999800 ) ) ; +#105 = EDGE_LOOP ( 'NONE', ( #2654, #911, #2035, #2248, #1787, #1823 ) ) ; +#106 = PLANE ( 'NONE', #414 ) ; +#107 = CYLINDRICAL_SURFACE ( 'NONE', #13, 20.32000000000000000 ) ; +#108 = FACE_OUTER_BOUND ( 'NONE', #671, .T. ) ; +#109 = VERTEX_POINT ( 'NONE', #1237 ) ; +#110 = PLANE ( 'NONE', #904 ) ; +#111 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#112 = FACE_OUTER_BOUND ( 'NONE', #1210, .T. ) ; +#113 = FACE_OUTER_BOUND ( 'NONE', #650, .T. ) ; +#114 = CYLINDRICAL_SURFACE ( 'NONE', #2348, 6.350000000000001400 ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .T. ) ; +#116 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125782700E-017 ) ) ; +#117 = EDGE_CURVE ( 'NONE', #1336, #1597, #462, .T. ) ; +#118 = FACE_OUTER_BOUND ( 'NONE', #209, .T. ) ; +#119 = EDGE_LOOP ( 'NONE', ( #2273, #1156, #2095, #653 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, -31.75000000000000700, -19.04999999999999700 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166955800, 2.649999999999999500 ) ) ; +#122 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267416300, -26.31215327778011200, 2.649999999999999500 ) ) ; +#124 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548023000, 29.11974387893084400, -25.40000000000000200 ) ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, 1.516186576881335000, -4.767077332085781600E-016 ) ) ; +#127 = AXIS2_PLACEMENT_3D ( 'NONE', #2137, #1499, #207 ) ; +#128 = DIRECTION ( 'NONE', ( -0.4226182617407037700, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, 31.65399872081854600, 7.450000000000002000 ) ) ; +#130 = EDGE_CURVE ( 'NONE', #34, #2331, #490, .T. ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000400, -25.41000000000001100 ) ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #1809, .T. ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479774300, -22.73394224359666900, -20.14999999999999500 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( -9.591495365042289800, 23.14251631472483700, -15.34999999999999800 ) ) ; +#135 = EDGE_LOOP ( 'NONE', ( #1429, #1720, #2087, #1260, #493, #1137, #2258, #1161, #2317, #1561 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937033800, -21.67739658924489600, -0.1499999999999938900 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#138 = FACE_OUTER_BOUND ( 'NONE', #2453, .T. ) ; +#139 = ORIENTED_EDGE ( 'NONE', *, *, #941, .F. ) ; +#140 = FACE_OUTER_BOUND ( 'NONE', #218, .T. ) ; +#141 = ORIENTED_EDGE ( 'NONE', *, *, #2687, .F. ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720609000, 21.67739658924494600, 7.450000000000002000 ) ) ; +#143 = VECTOR ( 'NONE', #1078, 1000.000000000000000 ) ; +#144 = LINE ( 'NONE', #1408, #806 ) ; +#145 = VERTEX_POINT ( 'NONE', #1510 ) ; +#146 = DIRECTION ( 'NONE', ( -0.3659981507706630600, -0.7848855672213932400, 0.5000000000000065500 ) ) ; +#147 = LINE ( 'NONE', #1439, #1799 ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #681, .F. ) ; +#149 = EDGE_CURVE ( 'NONE', #2431, #2431, #2102, .T. ) ; +#150 = VECTOR ( 'NONE', #985, 1000.000000000000000 ) ; +#151 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .F. ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #1374, .T. ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, 12.69999999999999900 ) ) ; +#154 = VERTEX_POINT ( 'NONE', #2180 ) ; +#155 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#156 = AXIS2_PLACEMENT_3D ( 'NONE', #260, #2575, #1330 ) ; +#157 = PLANE ( 'NONE', #2458 ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, 31.65399872081854600, 7.450000000000002000 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( -41.19258710443459400, 21.90665156908910700, 1.411869291362268400 ) ) ; +#160 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #410 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #939, #2418, #1148 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, 31.75000000000000700, -14.55000000000010200 ) ) ; +#163 = EDGE_CURVE ( 'NONE', #639, #952, #1530, .T. ) ; +#164 = EDGE_CURVE ( 'NONE', #1729, #2473, #1578, .T. ) ; +#165 = DIRECTION ( 'NONE', ( 0.9063077870366511600, -0.4226182617406970500, 5.551115123125782700E-017 ) ) ; +#166 = EDGE_LOOP ( 'NONE', ( #1599 ) ) ; +#167 = DIRECTION ( 'NONE', ( -0.2113091308703485000, 0.4531538935183253000, 0.8660254037844387100 ) ) ; +#168 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #1372, #86 ) ; +#169 = DIRECTION ( 'NONE', ( 0.2113091308703513000, -0.4531538935183316900, 0.8660254037844347100 ) ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .F. ) ; +#171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#172 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037200, 8.326672684688674100E-017 ) ) ; +#173 = FACE_OUTER_BOUND ( 'NONE', #1490, .T. ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #2467, .T. ) ; +#175 = CYLINDRICAL_SURFACE ( 'NONE', #2371, 1.750000000000001100 ) ; +#176 = VECTOR ( 'NONE', #2018, 1000.000000000000100 ) ; +#177 = EDGE_LOOP ( 'NONE', ( #2125, #1090, #6, #2382, #1281, #257, #2367, #1621 ) ) ; +#178 = LINE ( 'NONE', #1208, #769 ) ; +#179 = FACE_BOUND ( 'NONE', #85, .T. ) ; +#180 = FACE_OUTER_BOUND ( 'NONE', #2562, .T. ) ; +#181 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#182 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548023000, 29.11974387893084400, 12.69999999999999600 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, -17.35000000000000100 ) ) ; +#185 = FACE_OUTER_BOUND ( 'NONE', #399, .T. ) ; +#186 = ORIENTED_EDGE ( 'NONE', *, *, #1232, .F. ) ; +#187 = EDGE_CURVE ( 'NONE', #2171, #239, #972, .T. ) ; +#188 = ORIENTED_EDGE ( 'NONE', *, *, #1738, .T. ) ; +#189 = EDGE_CURVE ( 'NONE', #1873, #1873, #1463, .T. ) ; +#190 = VERTEX_POINT ( 'NONE', #275 ) ; +#191 = VERTEX_POINT ( 'NONE', #142 ) ; +#192 = VERTEX_POINT ( 'NONE', #877 ) ; +#193 = DIRECTION ( 'NONE', ( -0.4226182617406971700, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#194 = AXIS2_PLACEMENT_3D ( 'NONE', #349, #1842, #574 ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166956900, -15.34999999999999800 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, 4.650000000000001200 ) ) ; +#197 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2491, #1023, #2085, #821 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.109078673754956900, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670601100, 0.9974755015670601100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#198 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937053400, -21.67739658924493500, -18.15000000000000600 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493036400, 31.75000000000000000, -129.5477436145402200 ) ) ; +#200 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688674100E-017 ) ) ; +#201 = EDGE_CURVE ( 'NONE', #1445, #848, #326, .T. ) ; +#202 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #2647, .T. ) ; +#204 = EDGE_CURVE ( 'NONE', #1255, #1872, #398, .T. ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #2378, .T. ) ; +#206 = ADVANCED_FACE ( 'NONE', ( #2506, #1962 ), #1318, .F. ) ; +#207 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#208 = FACE_OUTER_BOUND ( 'NONE', #559, .T. ) ; +#209 = EDGE_LOOP ( 'NONE', ( #685, #1417, #1726, #1046 ) ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, -21.67739658924492800, -20.14999999999999500 ) ) ; +#211 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #1689, #845 ) ; +#212 = LINE ( 'NONE', #962, #801 ) ; +#213 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#214 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .T. ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, -31.75000000000000700, -19.04999999999999700 ) ) ; +#216 = FACE_OUTER_BOUND ( 'NONE', #1747, .T. ) ; +#217 = FACE_OUTER_BOUND ( 'NONE', #973, .T. ) ; +#218 = EDGE_LOOP ( 'NONE', ( #350, #2000, #1919, #594, #856, #1504 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412100, -31.75000000000000000, 5.450000000000000200 ) ) ; +#220 = VECTOR ( 'NONE', #581, 1000.000000000000100 ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #846, .T. ) ; +#222 = FACE_OUTER_BOUND ( 'NONE', #177, .T. ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #2630, .F. ) ; +#224 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, 0.0000000000000000000 ) ) ; +#225 = VERTEX_POINT ( 'NONE', #2381 ) ; +#226 = EDGE_LOOP ( 'NONE', ( #2397 ) ) ; +#227 = ADVANCED_FACE ( 'NONE', ( #1902 ), #1989, .F. ) ; +#228 = DIRECTION ( 'NONE', ( 0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#229 = EDGE_CURVE ( 'NONE', #756, #1529, #774, .T. ) ; +#230 = AXIS2_PLACEMENT_3D ( 'NONE', #2113, #842, #2324 ) ; +#231 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720609000, 21.67739658924494600, 7.450000000000002000 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -6.465667256368640800, -22.35466026123216600, -13.27484830567190100 ) ) ; +#234 = ADVANCED_FACE ( 'NONE', ( #2449, #902, #185 ), #1547, .T. ) ; +#235 = ORIENTED_EDGE ( 'NONE', *, *, #306, .F. ) ; +#236 = EDGE_CURVE ( 'NONE', #2574, #1363, #1257, .T. ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#238 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#239 = VERTEX_POINT ( 'NONE', #891 ) ; +#240 = FACE_OUTER_BOUND ( 'NONE', #1277, .T. ) ; +#241 = AXIS2_PLACEMENT_3D ( 'NONE', #953, #1594, #522 ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #55, .T. ) ; +#243 = VECTOR ( 'NONE', #22, 1000.000000000000100 ) ; +#244 = FACE_OUTER_BOUND ( 'NONE', #280, .T. ) ; +#245 = ORIENTED_EDGE ( 'NONE', *, *, #818, .T. ) ; +#246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#247 = FACE_OUTER_BOUND ( 'NONE', #1316, .T. ) ; +#248 = ADVANCED_FACE ( 'NONE', ( #118 ), #1194, .F. ) ; +#249 = FACE_OUTER_BOUND ( 'NONE', #295, .T. ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( -3.533768920313650000, -27.89819190509425100, -15.34999999999999800 ) ) ; +#251 = VECTOR ( 'NONE', #1682, 1000.000000000000100 ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #2246, .T. ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -129.5477436145402200 ) ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .T. ) ; +#255 = VECTOR ( 'NONE', #1335, 1000.000000000000000 ) ; +#256 = EDGE_LOOP ( 'NONE', ( #1976 ) ) ; +#257 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, -31.65399872081854600, 7.450000000000002000 ) ) ; +#259 = EDGE_CURVE ( 'NONE', #327, #1800, #2333, .T. ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( -43.62164533473870200, -22.61302334176248900, -17.35000000000000100 ) ) ; +#262 = DIRECTION ( 'NONE', ( 0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#263 = EDGE_CURVE ( 'NONE', #1904, #2473, #1830, .T. ) ; +#264 = ADVANCED_FACE ( 'NONE', ( #1760 ), #2608, .T. ) ; +#265 = AXIS2_PLACEMENT_3D ( 'NONE', #1609, #2443, #2622 ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( -0.8475956420387212900, -10.30666680438349500, 5.599848305672035800 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674640500, -22.85997687295769200, -25.39999999999999900 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, 4.650000000000001200 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( -48.15318426992195100, 24.72611465046597000, -17.35000000000000100 ) ) ; +#270 = PLANE ( 'NONE', #446 ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #592, .F. ) ; +#272 = AXIS2_PLACEMENT_3D ( 'NONE', #2643, #1411, #128 ) ; +#273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.5372787775435218200, -0.8434047161365287900 ) ) ; +#274 = PLANE ( 'NONE', #285 ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479772200, 22.73394224359668700, 7.450000000000002000 ) ) ; +#276 = VERTEX_POINT ( 'NONE', #1328 ) ; +#277 = VECTOR ( 'NONE', #161, 1000.000000000000000 ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140391900, -0.4596409225296179700, -12.55000000000009800 ) ) ; +#279 = ADVANCED_FACE ( 'NONE', ( #636, #1704 ), #2201, .F. ) ; +#280 = EDGE_LOOP ( 'NONE', ( #929, #375, #2286, #1176 ) ) ; +#281 = EDGE_CURVE ( 'NONE', #327, #1255, #1136, .T. ) ; +#282 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #505 ) ; +#283 = FACE_BOUND ( 'NONE', #2023, .T. ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #236, .T. ) ; +#285 = AXIS2_PLACEMENT_3D ( 'NONE', #1773, #716, #2210 ) ; +#286 = CIRCLE ( 'NONE', #2413, 1.750000000000001100 ) ; +#287 = FACE_OUTER_BOUND ( 'NONE', #2417, .T. ) ; +#288 = ORIENTED_EDGE ( 'NONE', *, *, #2411, .F. ) ; +#289 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #372, #1650, #2292, #1020 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 2.967486020165160300, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670597700, 0.9974755015670597700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#290 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -25.39999999999999900 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.75000000000000700, -19.04999999999999700 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156324100, -20.74688556425400400, -14.54999999999996000 ) ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #2344, .F. ) ; +#294 = FACE_BOUND ( 'NONE', #833, .T. ) ; +#295 = EDGE_LOOP ( 'NONE', ( #1719 ) ) ; +#296 = DIRECTION ( 'NONE', ( 0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#297 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#298 = EDGE_LOOP ( 'NONE', ( #392, #2589, #1705, #640, #2337 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661911200, 31.75000000000000700, 1.850000000000002500 ) ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, -129.5477436145402200 ) ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .F. ) ; +#302 = FACE_OUTER_BOUND ( 'NONE', #870, .T. ) ; +#303 = ADVANCED_FACE ( 'NONE', ( #1636, #2698 ), #2135, .F. ) ; +#304 = DIRECTION ( 'NONE', ( 0.2113091308703492800, 0.4531538935183185800, -0.8660254037844420400 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, 20.21227686376499800, -17.34999999999997700 ) ) ; +#306 = EDGE_CURVE ( 'NONE', #1292, #1292, #2648, .T. ) ; +#307 = AXIS2_PLACEMENT_3D ( 'NONE', #910, #715, #683 ) ; +#308 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#309 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .T. ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479770800, -22.73394224359670400, -14.54999999999998500 ) ) ; +#311 = VERTEX_POINT ( 'NONE', #299 ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, -31.75000000000000000, 5.450000000000000200 ) ) ; +#313 = DIRECTION ( 'NONE', ( -2.031697869779130400E-017, 0.5372787775435288200, -0.8434047161365243500 ) ) ; +#314 = VECTOR ( 'NONE', #1044, 1000.000000000000100 ) ; +#315 = EDGE_LOOP ( 'NONE', ( #2134 ) ) ; +#316 = FACE_OUTER_BOUND ( 'NONE', #688, .T. ) ; +#317 = EDGE_CURVE ( 'NONE', #1014, #582, #496, .T. ) ; +#318 = LINE ( 'NONE', #266, #1387 ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #991, .T. ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( -43.45835657202621900, 22.96319722344084400, 1.411869291362268400 ) ) ; +#321 = VECTOR ( 'NONE', #1829, 1000.000000000000000 ) ; +#322 = EDGE_LOOP ( 'NONE', ( #1670, #1480, #463, #2668 ) ) ; +#323 = EDGE_LOOP ( 'NONE', ( #151, #459, #1424, #427 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -42.88206337669247900, 24.19906196907662700, 4.650000000000001200 ) ) ; +#325 = AXIS2_PLACEMENT_3D ( 'NONE', #2450, #1180, #2628 ) ; +#326 = LINE ( 'NONE', #292, #839 ) ; +#327 = VERTEX_POINT ( 'NONE', #219 ) ; +#328 = DIRECTION ( 'NONE', ( 6.124977852475733400E-017, -8.366254228761938800E-033, -1.000000000000000000 ) ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #2150, .F. ) ; +#330 = ORIENTED_EDGE ( 'NONE', *, *, #59, .F. ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720608300, 21.67739658924496400, -14.54999999999998500 ) ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #758, .F. ) ; +#333 = DIRECTION ( 'NONE', ( -0.4226182617407034900, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#334 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #360, #1848 ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( -42.89447850551818700, 18.25693368150960100, 0.9131307086377289400 ) ) ; +#336 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #297, 'design' ) ; +#337 = EDGE_CURVE ( 'NONE', #853, #1637, #2272, .T. ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#339 = EDGE_CURVE ( 'NONE', #1529, #2700, #1370, .T. ) ; +#340 = DIRECTION ( 'NONE', ( 0.3659981507706660500, -0.7848855672213995700, 0.4999999999999946200 ) ) ; +#341 = AXIS2_PLACEMENT_3D ( 'NONE', #2274, #1836, #1405 ) ; +#342 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, -17.35000000000000100 ) ) ; +#344 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, -0.0000000000000000000 ) ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #1211, .F. ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187573500, 26.31215327778010900, -17.35000000000000100 ) ) ; +#347 = VERTEX_POINT ( 'NONE', #1580 ) ; +#348 = VECTOR ( 'NONE', #588, 1000.000000000000100 ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 12.69999999999999900 ) ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ; +#351 = DIRECTION ( 'NONE', ( 0.3659981507706630600, -0.7848855672213932400, -0.5000000000000065500 ) ) ; +#352 = LINE ( 'NONE', #534, #1990 ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #337, .T. ) ; +#354 = EDGE_CURVE ( 'NONE', #2233, #992, #1566, .T. ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752413000, -31.75000000000000000, -129.5477436145402200 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732305000, -22.83001686389457800, -12.69999999999999900 ) ) ; +#357 = FACE_OUTER_BOUND ( 'NONE', #887, .T. ) ; +#358 = LINE ( 'NONE', #2605, #2528 ) ; +#359 = VERTEX_POINT ( 'NONE', #1998 ) ; +#360 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406983300, 0.0000000000000000000 ) ) ; +#361 = EDGE_CURVE ( 'NONE', #798, #276, #432, .T. ) ; +#362 = FACE_OUTER_BOUND ( 'NONE', #547, .T. ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #2055, .T. ) ; +#364 = VECTOR ( 'NONE', #1154, 1000.000000000000000 ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .T. ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( -40.61629390910085400, 23.14251631472488700, -17.35000000000000100 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( -6.465667256368640800, 22.35466026123216600, -13.27484830567190100 ) ) ; +#368 = DIRECTION ( 'NONE', ( -0.4226182617407034900, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#369 = EDGE_LOOP ( 'NONE', ( #2298 ) ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #2361, .T. ) ; +#371 = LINE ( 'NONE', #682, #875 ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, 31.65399872081853200, -20.15000000000003400 ) ) ; +#373 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, -20.74688556425414600, -3.002671082198546400E-015 ) ) ; +#375 = ORIENTED_EDGE ( 'NONE', *, *, #1508, .F. ) ; +#376 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037200, 8.326672684688674100E-017 ) ) ; +#377 = AXIS2_PLACEMENT_3D ( 'NONE', #409, #2690, #1476 ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831792100, -20.21227686376498100, -15.35000000000001900 ) ) ; +#379 = DIRECTION ( 'NONE', ( -0.3659981507706648300, -0.7848855672213969100, -0.4999999999999997800 ) ) ; +#380 = EDGE_CURVE ( 'NONE', #1691, #756, #1497, .T. ) ; +#381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#382 = AXIS2_PLACEMENT_3D ( 'NONE', #847, #2338, #1065 ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -25.39999999999999900 ) ) ; +#384 = DIRECTION ( 'NONE', ( 0.4226182617407037700, 0.9063077870366479400, -3.755786496842899800E-015 ) ) ; +#385 = ORIENTED_EDGE ( 'NONE', *, *, #1134, .T. ) ; +#386 = EDGE_LOOP ( 'NONE', ( #2103, #2119, #2130, #2153 ) ) ; +#387 = LINE ( 'NONE', #1236, #1587 ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ; +#389 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 5.551115123125782700E-017 ) ) ; +#390 = CIRCLE ( 'NONE', #1796, 20.32000000000000000 ) ; +#391 = LINE ( 'NONE', #2403, #1033 ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #1746, .T. ) ; +#393 = CYLINDRICAL_SURFACE ( 'NONE', #265, 1.750000000000001100 ) ; +#394 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .F. ) ; +#395 = EDGE_CURVE ( 'NONE', #1872, #840, #2001, .T. ) ; +#396 = LINE ( 'NONE', #2663, #899 ) ; +#397 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ; +#398 = LINE ( 'NONE', #2593, #1397 ) ; +#399 = EDGE_LOOP ( 'NONE', ( #1523, #1348, #1447, #835, #170, #2165, #415, #923, #2003, #906 ) ) ; +#400 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366510500, -1.341352320301034800E-016 ) ) ; +#401 = AXIS2_PLACEMENT_3D ( 'NONE', #748, #2231, #954 ) ; +#402 = VERTEX_POINT ( 'NONE', #1980 ) ; +#403 = EDGE_LOOP ( 'NONE', ( #782 ) ) ; +#404 = PLANE ( 'NONE', #1770 ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267418900, 26.31215327778011900, -15.34999999999999800 ) ) ; +#406 = PLANE ( 'NONE', #2462 ) ; +#407 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#408 = EDGE_CURVE ( 'NONE', #742, #742, #1428, .T. ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, -17.35000000000000100 ) ) ; +#410 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #939, 'distance_accuracy_value', 'NONE'); +#411 = EDGE_CURVE ( 'NONE', #1396, #2473, #2480, .T. ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, -12.69999999999999900 ) ) ; +#413 = VERTEX_POINT ( 'NONE', #2016 ) ; +#414 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #549, #2043 ) ; +#415 = ORIENTED_EDGE ( 'NONE', *, *, #916, .F. ) ; +#416 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#417 = PLANE ( 'NONE', #662 ) ; +#418 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#419 = FACE_OUTER_BOUND ( 'NONE', #1856, .T. ) ; +#420 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ; +#421 = VECTOR ( 'NONE', #518, 1000.000000000000000 ) ; +#422 = DIRECTION ( 'NONE', ( 0.2113091308703513000, 0.4531538935183316900, 0.8660254037844347100 ) ) ; +#423 = EDGE_LOOP ( 'NONE', ( #1116 ) ) ; +#424 = VECTOR ( 'NONE', #2117, 1000.000000000000000 ) ; +#426 = VECTOR ( 'NONE', #1168, 1000.000000000000100 ) ; +#425 = AXIS2_PLACEMENT_3D ( 'NONE', #1914, #1082, #2539 ) ; +#427 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ; +#428 = DIRECTION ( 'NONE', ( 0.3659981507706706600, -0.7848855672213944600, -0.4999999999999994400 ) ) ; +#429 = FACE_OUTER_BOUND ( 'NONE', #2008, .T. ) ; +#430 = ADVANCED_FACE ( 'NONE', ( #811 ), #523, .F. ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ; +#432 = LINE ( 'NONE', #2010, #2535 ) ; +#433 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ; +#434 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ; +#435 = EDGE_CURVE ( 'NONE', #154, #154, #935, .T. ) ; +#436 = EDGE_LOOP ( 'NONE', ( #2373, #2118, #1519, #2208 ) ) ; +#437 = VECTOR ( 'NONE', #228, 1000.000000000000000 ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( -45.21856676291189100, -13.27291032965379400, -4.088130708637633500 ) ) ; +#439 = PLANE ( 'NONE', #1030 ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393139766800, -0.4596409225297514700, -18.15000000000025800 ) ) ; +#441 = ADVANCED_FACE ( 'NONE', ( #222 ), #1810, .T. ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035900, 31.75000000000000000, -18.14999999999988500 ) ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, 5.450000000000000200 ) ) ; +#444 = EDGE_CURVE ( 'NONE', #68, #1667, #1865, .T. ) ; +#445 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125782700E-017 ) ) ; +#446 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #238, #66 ) ; +#447 = ORIENTED_EDGE ( 'NONE', *, *, #2216, .F. ) ; +#448 = ORIENTED_EDGE ( 'NONE', *, *, #520, .T. ) ; +#449 = AXIS2_PLACEMENT_3D ( 'NONE', #49, #712, #2203 ) ; +#450 = LINE ( 'NONE', #2670, #960 ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#452 = ADVANCED_FACE ( 'NONE', ( #1289 ), #1384, .T. ) ; +#453 = VERTEX_POINT ( 'NONE', #543 ) ; +#454 = DIRECTION ( 'NONE', ( -0.2113091308703516600, -0.4531538935183234100, -0.8660254037844389300 ) ) ; +#455 = LINE ( 'NONE', #2546, #892 ) ; +#456 = LINE ( 'NONE', #1708, #2091 ) ; +#457 = ORIENTED_EDGE ( 'NONE', *, *, #951, .T. ) ; +#458 = FACE_OUTER_BOUND ( 'NONE', #1778, .T. ) ; +#459 = ORIENTED_EDGE ( 'NONE', *, *, #1683, .F. ) ; +#460 = VECTOR ( 'NONE', #2077, 1000.000000000000100 ) ; +#461 = ORIENTED_EDGE ( 'NONE', *, *, #2543, .T. ) ; +#462 = LINE ( 'NONE', #1104, #2619 ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .F. ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000700, -19.04999999999999700 ) ) ; +#465 = VERTEX_POINT ( 'NONE', #52 ) ; +#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#467 = EDGE_CURVE ( 'NONE', #2374, #2374, #735, .T. ) ; +#468 = ADVANCED_FACE ( 'NONE', ( #1932, #1801 ), #670, .F. ) ; +#469 = AXIS2_PLACEMENT_3D ( 'NONE', #338, #1832, #552 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427469600, -25.39999999999999900, -25.39999999999999900 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( -17.12838572586336700, 21.55891797898370000, -15.34999999999999800 ) ) ; +#472 = AXIS2_PLACEMENT_3D ( 'NONE', #1862, #584, #2075 ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.74999999999999300, 6.718991938161258800 ) ) ; +#474 = EDGE_CURVE ( 'NONE', #1729, #1585, #2368, .T. ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .F. ) ; +#476 = ADVANCED_FACE ( 'NONE', ( #294, #1225 ), #96, .F. ) ; +#477 = EDGE_CURVE ( 'NONE', #1805, #1805, #1730, .T. ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( -17.12838572586336700, -21.55891797898370000, -15.34999999999999800 ) ) ; +#479 = VERTEX_POINT ( 'NONE', #1623 ) ; +#480 = LINE ( 'NONE', #367, #2122 ) ; +#481 = AXIS2_PLACEMENT_3D ( 'NONE', #366, #1850, #578 ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #1479, .F. ) ; +#483 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, -31.75000000000000700, -129.5477436145402200 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, -31.75000000000000700, -129.5477436145402200 ) ) ; +#486 = FACE_BOUND ( 'NONE', #2239, .T. ) ; +#487 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .F. ) ; +#488 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#489 = LINE ( 'NONE', #2316, #1558 ) ; +#490 = LINE ( 'NONE', #1435, #1042 ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( -34.55856746437218200, -18.38684072435551200, -17.35000000000000100 ) ) ; +#492 = VECTOR ( 'NONE', #2598, 1000.000000000000000 ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #1912, .T. ) ; +#494 = CIRCLE ( 'NONE', #325, 1.749999999999998400 ) ; +#495 = EDGE_LOOP ( 'NONE', ( #762, #728, #1242, #1570, #2336, #1588, #1804, #2054 ) ) ; +#496 = LINE ( 'NONE', #747, #1007 ) ; +#497 = VERTEX_POINT ( 'NONE', #120 ) ; +#498 = ADVANCED_FACE ( 'NONE', ( #599, #81 ), #1671, .F. ) ; +#499 = ORIENTED_EDGE ( 'NONE', *, *, #1702, .T. ) ; +#500 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #258, #1538, #473, #1971 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.109078673754956900, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670601100, 0.9974755015670601100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#501 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, -1.516186576881335000, 5.450000000000000200 ) ) ; +#502 = CIRCLE ( 'NONE', #515, 1.750000000000001100 ) ; +#503 = EDGE_CURVE ( 'NONE', #2233, #479, #2234, .T. ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 4.323695644845964300E-015, 31.65399872081854600, 7.450000000000002000 ) ) ; +#505 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#506 = EDGE_CURVE ( 'NONE', #1255, #539, #17, .T. ) ; +#507 = AXIS2_PLACEMENT_3D ( 'NONE', #2691, #1058, #2515 ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, -31.65399872081853200, -20.15000000000003400 ) ) ; +#509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#510 = ADVANCED_FACE ( 'NONE', ( #2673 ), #2059, .T. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831786700, 20.21227686376496600, 2.650000000000001200 ) ) ; +#512 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 5.450000000000009900 ) ) ; +#514 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .T. ) ; +#515 = AXIS2_PLACEMENT_3D ( 'NONE', #1724, #445, #1941 ) ; +#516 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#517 = ORIENTED_EDGE ( 'NONE', *, *, #1718, .F. ) ; +#518 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 4.535039887899775800E-015 ) ) ; +#519 = EDGE_LOOP ( 'NONE', ( #1074, #1071, #447, #1978 ) ) ; +#520 = EDGE_CURVE ( 'NONE', #1230, #1230, #2304, .T. ) ; +#521 = CYLINDRICAL_SURFACE ( 'NONE', #621, 6.350000000000001400 ) ; +#522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#523 = PLANE ( 'NONE', #1399 ) ; +#524 = VERTEX_POINT ( 'NONE', #133 ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166956900, -15.34999999999999800 ) ) ; +#526 = LINE ( 'NONE', #198, #2159 ) ; +#527 = ORIENTED_EDGE ( 'NONE', *, *, #2365, .F. ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( -6.407348466566466200, 16.31409125502447600, 10.09984830567204600 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831786700, 20.21227686376496600, 2.650000000000001200 ) ) ; +#530 = LINE ( 'NONE', #2609, #2163 ) ; +#531 = ORIENTED_EDGE ( 'NONE', *, *, #2600, .F. ) ; +#532 = VECTOR ( 'NONE', #1018, 1000.000000000000000 ) ; +#533 = ORIENTED_EDGE ( 'NONE', *, *, #1199, .F. ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, 12.69999999999999900 ) ) ; +#535 = CYLINDRICAL_SURFACE ( 'NONE', #1091, 6.350000000000001400 ) ; +#536 = EDGE_LOOP ( 'NONE', ( #660 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#538 = VERTEX_POINT ( 'NONE', #917 ) ; +#539 = VERTEX_POINT ( 'NONE', #1421 ) ; +#540 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125782700E-017 ) ) ; +#541 = EDGE_CURVE ( 'NONE', #721, #1667, #1163, .T. ) ; +#542 = AXIS2_PLACEMENT_3D ( 'NONE', #268, #2222, #2435 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, 21.67739658924489600, -12.55000000000001100 ) ) ; +#544 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#545 = AXIS2_PLACEMENT_3D ( 'NONE', #126, #788, #2279 ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, 20.74688556425414600, -3.002671082198546400E-015 ) ) ; +#547 = EDGE_LOOP ( 'NONE', ( #2455, #1985, #905, #1465 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, -1.516186576881335000, -4.767077332085781600E-016 ) ) ; +#549 = DIRECTION ( 'NONE', ( -0.3659981507706646700, -0.7848855672213963500, 0.5000000000000007800 ) ) ; +#550 = ORIENTED_EDGE ( 'NONE', *, *, #1477, .F. ) ; +#551 = EDGE_CURVE ( 'NONE', #2062, #1569, #2167, .T. ) ; +#552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#553 = FACE_OUTER_BOUND ( 'NONE', #979, .T. ) ; +#554 = VERTEX_POINT ( 'NONE', #1214 ) ; +#555 = DIRECTION ( 'NONE', ( 0.4226182617407037700, 0.9063077870366479400, -6.842277657836020900E-049 ) ) ; +#556 = PLANE ( 'NONE', #97 ) ; +#557 = LINE ( 'NONE', #504, #623 ) ; +#558 = EDGE_CURVE ( 'NONE', #1496, #734, #2096, .T. ) ; +#559 = EDGE_LOOP ( 'NONE', ( #319, #2479, #1659, #571 ) ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166955800, 2.649999999999999500 ) ) ; +#561 = VECTOR ( 'NONE', #2310, 1000.000000000000100 ) ; +#562 = VECTOR ( 'NONE', #2529, 1000.000000000000000 ) ; +#563 = VECTOR ( 'NONE', #1345, 1000.000000000000100 ) ; +#564 = ORIENTED_EDGE ( 'NONE', *, *, #2496, .T. ) ; +#565 = LINE ( 'NONE', #98, #1634 ) ; +#566 = VERTEX_POINT ( 'NONE', #1868 ) ; +#567 = VECTOR ( 'NONE', #1556, 1000.000000000000000 ) ; +#568 = EDGE_LOOP ( 'NONE', ( #1899, #829, #88, #2157, #1151, #31 ) ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345416300, 22.73394224359666200, 5.450000000000000200 ) ) ; +#570 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711644300, 31.75000000000000000, -19.04999999999999700 ) ) ; +#571 = ORIENTED_EDGE ( 'NONE', *, *, #2295, .F. ) ; +#572 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#573 = ORIENTED_EDGE ( 'NONE', *, *, #1675, .F. ) ; +#574 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( -41.19258710443459400, 21.90665156908910700, 1.411869291362268400 ) ) ; +#576 = EDGE_CURVE ( 'NONE', #639, #2481, #2616, .T. ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, 6.349999999999994300 ) ) ; +#578 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#579 = DIRECTION ( 'NONE', ( 0.2113091308703492800, -0.4531538935183185800, -0.8660254037844420400 ) ) ; +#580 = PLANE ( 'NONE', #1844 ) ; +#581 = DIRECTION ( 'NONE', ( 0.2113091308703486700, -0.4531538935183260200, 0.8660254037844382600 ) ) ; +#582 = VERTEX_POINT ( 'NONE', #1437 ) ; +#583 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2512, #2474, #617, #1256 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#585 = ORIENTED_EDGE ( 'NONE', *, *, #2323, .F. ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, -21.67739658924494300, 1.850000000000001000 ) ) ; +#587 = VERTEX_POINT ( 'NONE', #815 ) ; +#588 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674643400, 22.85997687295763100, -25.39999999999999900 ) ) ; +#590 = LINE ( 'NONE', #595, #1029 ) ; +#591 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .T. ) ; +#592 = EDGE_CURVE ( 'NONE', #1876, #1431, #2557, .T. ) ; +#593 = DIRECTION ( 'NONE', ( 0.4226182617407036000, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#594 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( -38.86849884704084700, 26.89067492094501700, -4.586869291362387600 ) ) ; +#596 = AXIS2_PLACEMENT_3D ( 'NONE', #2680, #2703, #2658 ) ; +#597 = CIRCLE ( 'NONE', #2570, 1.750000000000001100 ) ; +#598 = ORIENTED_EDGE ( 'NONE', *, *, #844, .T. ) ; +#599 = FACE_OUTER_BOUND ( 'NONE', #226, .T. ) ; +#600 = ORIENTED_EDGE ( 'NONE', *, *, #2055, .F. ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, -21.67739658924494300, 1.850000000000001000 ) ) ; +#602 = VERTEX_POINT ( 'NONE', #1022 ) ; +#603 = VERTEX_POINT ( 'NONE', #1757 ) ; +#604 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267418900, -26.31215327778011900, -15.34999999999999800 ) ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397158800, 19.69033990990234500, -20.14999999999998800 ) ) ; +#607 = AXIS2_PLACEMENT_3D ( 'NONE', #1967, #1351, #65 ) ; +#608 = DIRECTION ( 'NONE', ( -4.063395739558213900E-017, 0.5372787775435213800, -0.8434047161365291200 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -5.811605263460792000, 2.709996040525698600, -7.150615998128679300E-016 ) ) ; +#610 = EDGE_CURVE ( 'NONE', #1076, #34, #396, .T. ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720609000, -21.67739658924494600, 7.450000000000002000 ) ) ; +#612 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#613 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#614 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#615 = EDGE_LOOP ( 'NONE', ( #1191, #174, #2672, #1452 ) ) ; +#616 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .T. ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, 31.75000000000000700, 10.06974387893084400 ) ) ; +#618 = PLANE ( 'NONE', #2195 ) ; +#619 = VECTOR ( 'NONE', #2147, 1000.000000000000000 ) ; +#620 = ORIENTED_EDGE ( 'NONE', *, *, #2489, .F. ) ; +#621 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #2477, #2285 ) ; +#622 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#623 = VECTOR ( 'NONE', #1992, 1000.000000000000000 ) ; +#624 = VECTOR ( 'NONE', #2438, 1000.000000000000100 ) ; +#625 = EDGE_LOOP ( 'NONE', ( #499 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 10.06974387893084400 ) ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( -47.48433623050350900, -14.32945598400553600, -4.088130708637633500 ) ) ; +#628 = EDGE_CURVE ( 'NONE', #1585, #413, #1273, .T. ) ; +#629 = LINE ( 'NONE', #2086, #561 ) ; +#630 = LINE ( 'NONE', #2161, #562 ) ; +#631 = EDGE_CURVE ( 'NONE', #675, #675, #1598, .T. ) ; +#632 = LINE ( 'NONE', #1334, #2269 ) ; +#633 = VERTEX_POINT ( 'NONE', #1446 ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, -25.40000000000000600 ) ) ; +#635 = LINE ( 'NONE', #1172, #2695 ) ; +#636 = FACE_OUTER_BOUND ( 'NONE', #1849, .T. ) ; +#637 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .F. ) ; +#638 = AXIS2_PLACEMENT_3D ( 'NONE', #790, #1010, #2470 ) ; +#639 = VERTEX_POINT ( 'NONE', #601 ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #1134, .F. ) ; +#641 = DIRECTION ( 'NONE', ( 0.4226182617407026600, 0.9063077870366483800, 0.0000000000000000000 ) ) ; +#642 = ORIENTED_EDGE ( 'NONE', *, *, #2522, .T. ) ; +#643 = DIRECTION ( 'NONE', ( 2.891671490101912600E-049, -6.201209522363663400E-049, 1.000000000000000000 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( -41.13426831463247200, 27.94722057529676100, -4.586869291362387600 ) ) ; +#645 = ADVANCED_FACE ( 'NONE', ( #1959 ), #2099, .F. ) ; +#646 = PLANE ( 'NONE', #1939 ) ; +#647 = EDGE_CURVE ( 'NONE', #453, #1121, #1459, .T. ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 5.095300194039256200E-013, 31.75000000000000000, -18.14999999999994500 ) ) ; +#649 = EDGE_CURVE ( 'NONE', #734, #721, #2505, .T. ) ; +#650 = EDGE_LOOP ( 'NONE', ( #1593 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000000, 10.06974387893084000 ) ) ; +#652 = AXIS2_PLACEMENT_3D ( 'NONE', #1488, #200, #1711 ) ; +#653 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .F. ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, -31.75000000000000000, -12.54999999999996900 ) ) ; +#655 = ADVANCED_FACE ( 'NONE', ( #1393, #836 ), #404, .T. ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, 20.74688556425414600, 7.450000000000002000 ) ) ; +#657 = VECTOR ( 'NONE', #2145, 1000.000000000000000 ) ; +#658 = ORIENTED_EDGE ( 'NONE', *, *, #2244, .F. ) ; +#659 = FACE_BOUND ( 'NONE', #1717, .T. ) ; +#660 = ORIENTED_EDGE ( 'NONE', *, *, #2126, .T. ) ; +#661 = PRESENTATION_STYLE_ASSIGNMENT (( #2704 ) ) ; +#663 = FACE_OUTER_BOUND ( 'NONE', #1466, .T. ) ; +#662 = AXIS2_PLACEMENT_3D ( 'NONE', #1264, #643, #2127 ) ; +#664 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .T. ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397158800, -19.69033990990234500, -20.14999999999998800 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752413000, 31.75000000000000000, -129.5477436145402200 ) ) ; +#667 = LINE ( 'NONE', #513, #1223 ) ; +#668 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( -39.37596295652743800, 31.71791858412207400, -19.78658659696806400 ) ) ; +#670 = CYLINDRICAL_SURFACE ( 'NONE', #2514, 1.750000000000002200 ) ; +#671 = EDGE_LOOP ( 'NONE', ( #527, #2544, #1831, #779 ) ) ; +#672 = EDGE_CURVE ( 'NONE', #2456, #1445, #1898, .T. ) ; +#673 = VERTEX_POINT ( 'NONE', #838 ) ; +#674 = ADVANCED_FACE ( 'NONE', ( #771, #1827 ), #1471, .T. ) ; +#675 = VERTEX_POINT ( 'NONE', #2567 ) ; +#676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#677 = DIRECTION ( 'NONE', ( -0.4226182617407037700, -0.9063077870366479400, 1.073081856240829400E-014 ) ) ; +#678 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .T. ) ; +#679 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#680 = ADVANCED_FACE ( 'NONE', ( #180 ), #114, .T. ) ; +#681 = EDGE_CURVE ( 'NONE', #1514, #1876, #1254, .T. ) ; +#682 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156321300, -20.74688556425408600, -20.14999999999998800 ) ) ; +#683 = DIRECTION ( 'NONE', ( 0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#684 = AXIS2_PLACEMENT_3D ( 'NONE', #2009, #1355, #2015 ) ; +#685 = ORIENTED_EDGE ( 'NONE', *, *, #1838, .F. ) ; +#686 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .T. ) ; +#687 = VECTOR ( 'NONE', #2526, 1000.000000000000000 ) ; +#688 = EDGE_LOOP ( 'NONE', ( #139, #1552, #284, #705, #2047, #1861, #803, #1833 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -34.55856746437218200, 18.38684072435551200, -17.35000000000000100 ) ) ; +#690 = LINE ( 'NONE', #33, #2388 ) ; +#691 = LINE ( 'NONE', #739, #1248 ) ; +#692 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .T. ) ; +#693 = LINE ( 'NONE', #589, #1188 ) ; +#694 = ADVANCED_FACE ( 'NONE', ( #2330 ), #1122, .F. ) ; +#695 = VECTOR ( 'NONE', #1943, 1000.000000000000100 ) ; +#696 = VECTOR ( 'NONE', #1546, 1000.000000000000000 ) ; +#697 = ORIENTED_EDGE ( 'NONE', *, *, #1859, .T. ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #558, .F. ) ; +#699 = EDGE_CURVE ( 'NONE', #2355, #992, #1315, .T. ) ; +#700 = VECTOR ( 'NONE', #555, 1000.000000000000000 ) ; +#701 = EDGE_LOOP ( 'NONE', ( #2676 ) ) ; +#702 = ORIENTED_EDGE ( 'NONE', *, *, #1966, .T. ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( -10.33107732308852000, 24.72855494203897200, -15.34999999999999800 ) ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 0.0000000000000000000 ) ) ; +#705 = ORIENTED_EDGE ( 'NONE', *, *, #743, .F. ) ; +#706 = EDGE_CURVE ( 'NONE', #775, #1396, #1190, .T. ) ; +#707 = AXIS2_PLACEMENT_3D ( 'NONE', #778, #1192, #2634 ) ; +#708 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1688, #183, #626, #2116 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#709 = CARTESIAN_POINT ( 'NONE', ( -5.437453367024188500, 14.23414450188777100, -8.774848305672051700 ) ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, 20.21227686376500200, 4.650000000000001200 ) ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#712 = DIRECTION ( 'NONE', ( 0.3659981507706648300, -0.7848855672213969100, 0.4999999999999997800 ) ) ; +#713 = ADVANCED_FACE ( 'NONE', ( #1697 ), #2198, .T. ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -48.15318426992195100, -24.72611465046597000, -17.35000000000000100 ) ) ; +#715 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#716 = DIRECTION ( 'NONE', ( 1.587263960764953200E-015, -3.403898548535812800E-015, 1.000000000000000000 ) ) ; +#717 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#718 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ; +#719 = EDGE_CURVE ( 'NONE', #1358, #225, #632, .T. ) ; +#720 = SURFACE_SIDE_STYLE ('',( #2005 ) ) ; +#721 = VERTEX_POINT ( 'NONE', #710 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, 31.75000000000000700, -22.76974387893084600 ) ) ; +#723 = FACE_OUTER_BOUND ( 'NONE', #1732, .T. ) ; +#724 = ADVANCED_FACE ( 'NONE', ( #1758 ), #274, .F. ) ; +#725 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#727 = FACE_OUTER_BOUND ( 'NONE', #1062, .T. ) ; +#728 = ORIENTED_EDGE ( 'NONE', *, *, #2256, .T. ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, 1.516186576881335000, -4.767077332085781600E-016 ) ) ; +#730 = CYLINDRICAL_SURFACE ( 'NONE', #808, 1.749999999999997800 ) ; +#731 = LINE ( 'NONE', #1403, #1794 ) ; +#732 = EDGE_LOOP ( 'NONE', ( #898 ) ) ; +#733 = LINE ( 'NONE', #2079, #1286 ) ; +#734 = VERTEX_POINT ( 'NONE', #1145 ) ; +#735 = CIRCLE ( 'NONE', #1970, 1.749999999999998400 ) ; +#736 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .F. ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479770800, 22.73394224359670400, -14.54999999999998500 ) ) ; +#738 = EDGE_LOOP ( 'NONE', ( #1002 ) ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( -8.731436723960261000, -21.29811460688040700, -13.27484830567190100 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, -20.21227686376500200, 4.650000000000001200 ) ) ; +#741 = ORIENTED_EDGE ( 'NONE', *, *, #649, .F. ) ; +#742 = VERTEX_POINT ( 'NONE', #689 ) ; +#743 = EDGE_CURVE ( 'NONE', #479, #1363, #1132, .T. ) ; +#744 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125782700E-017 ) ) ; +#745 = ORIENTED_EDGE ( 'NONE', *, *, #1278, .T. ) ; +#746 = AXIS2_PLACEMENT_3D ( 'NONE', #1733, #1272, #2108 ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 2.827132481838947800E-015, -31.65399872081853200, -20.15000000000007700 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, -17.35000000000000100 ) ) ; +#749 = DIRECTION ( 'NONE', ( -0.4226182617407043300, -0.9063077870366477200, 0.0000000000000000000 ) ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #2583, #1338, #56 ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( -3.113365109630341600, 9.250121150031734600, 5.599848305672035800 ) ) ; +#752 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#753 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #893, #336 ) ; +#754 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366510500, 3.219245568722476800E-015 ) ) ; +#755 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#756 = VERTEX_POINT ( 'NONE', #2415 ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, 4.650000000000001200 ) ) ; +#758 = EDGE_CURVE ( 'NONE', #1006, #1014, #1085, .T. ) ; +#759 = ORIENTED_EDGE ( 'NONE', *, *, #1612, .F. ) ; +#760 = VECTOR ( 'NONE', #2121, 1000.000000000000000 ) ; +#761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 9.725424424388032600E-015 ) ) ; +#762 = ORIENTED_EDGE ( 'NONE', *, *, #1278, .F. ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 12.69999999999999900 ) ) ; +#764 = LINE ( 'NONE', #1535, #1891 ) ; +#765 = LINE ( 'NONE', #930, #1822 ) ; +#766 = ORIENTED_EDGE ( 'NONE', *, *, #1479, .T. ) ; +#767 = DIRECTION ( 'NONE', ( -0.4226182617407037700, 0.9063077870366479400, 1.073081856240829400E-014 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, -4.767077332085781600E-016 ) ) ; +#769 = VECTOR ( 'NONE', #1854, 1000.000000000000000 ) ; +#770 = LINE ( 'NONE', #58, #1189 ) ; +#771 = FACE_BOUND ( 'NONE', #732, .T. ) ; +#772 = ORIENTED_EDGE ( 'NONE', *, *, #914, .T. ) ; +#773 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#774 = LINE ( 'NONE', #1346, #255 ) ; +#775 = VERTEX_POINT ( 'NONE', #1988 ) ; +#776 = PRESENTATION_STYLE_ASSIGNMENT (( #2213 ) ) ; +#777 = AXIS2_PLACEMENT_3D ( 'NONE', #1662, #381, #1875 ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, -1.516186576881335000, -4.767077332085781600E-016 ) ) ; +#779 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .T. ) ; +#780 = EDGE_CURVE ( 'NONE', #1750, #798, #2196, .T. ) ; +#781 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, -4.535039887899872900E-015 ) ) ; +#782 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .T. ) ; +#783 = EDGE_CURVE ( 'NONE', #2700, #1791, #1632, .T. ) ; +#784 = PLANE ( 'NONE', #545 ) ; +#785 = AXIS2_PLACEMENT_3D ( 'NONE', #1679, #389, #1882 ) ; +#786 = DIRECTION ( 'NONE', ( -0.4226182617407035500, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#787 = DIRECTION ( 'NONE', ( -0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#788 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #2617, .T. ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( -5.811605263460792000, -2.709996040525698600, -7.150615998128679300E-016 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, -20.74688556425414600, 7.450000000000002000 ) ) ; +#792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#793 = EDGE_LOOP ( 'NONE', ( #895, #2278, #2227, #1069, #102 ) ) ; +#794 = EDGE_CURVE ( 'NONE', #2233, #1729, #2129, .T. ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, -17.35000000000000100 ) ) ; +#796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#797 = VECTOR ( 'NONE', #171, 1000.000000000000000 ) ; +#798 = VERTEX_POINT ( 'NONE', #305 ) ; +#799 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #570, #1628, #125, #2052 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#800 = CARTESIAN_POINT ( 'NONE', ( 1.900431106201196900E-013, 31.75000000000000000, -12.54999999999999200 ) ) ; +#801 = VECTOR ( 'NONE', #1611, 1000.000000000000000 ) ; +#802 = EDGE_CURVE ( 'NONE', #952, #1851, #1560, .T. ) ; +#803 = ORIENTED_EDGE ( 'NONE', *, *, #474, .T. ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, 1.850000000000000800 ) ) ; +#805 = FACE_OUTER_BOUND ( 'NONE', #2565, .T. ) ; +#806 = VECTOR ( 'NONE', #2637, 1000.000000000000100 ) ; +#807 = ORIENTED_EDGE ( 'NONE', *, *, #1096, .T. ) ; +#808 = AXIS2_PLACEMENT_3D ( 'NONE', #195, #416, #641 ) ; +#809 = VECTOR ( 'NONE', #2283, 1000.000000000000000 ) ; +#810 = EDGE_LOOP ( 'NONE', ( #1271, #252, #1224, #1604 ) ) ; +#811 = FACE_OUTER_BOUND ( 'NONE', #1997, .T. ) ; +#812 = EDGE_LOOP ( 'NONE', ( #1009 ) ) ; +#813 = EDGE_LOOP ( 'NONE', ( #1886, #823, #604, #2155 ) ) ; +#814 = SHAPE_DEFINITION_REPRESENTATION ( #1539, #2635 ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831792100, -20.21227686376498100, -15.35000000000001900 ) ) ; +#816 = DIRECTION ( 'NONE', ( 0.4226182617406970500, 0.9063077870366511600, -1.073081856240824500E-014 ) ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393139766800, -0.4596409225297514700, -18.15000000000025800 ) ) ; +#818 = EDGE_CURVE ( 'NONE', #1655, #1691, #2694, .T. ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, -21.67739658924492800, -20.14999999999999500 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711751800, -31.75000000000000000, 6.349999999999994300 ) ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, -31.75000000000000700, 6.349999999999994300 ) ) ; +#822 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #576, .F. ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, -29.11974387893085500, 12.69999999999999200 ) ) ; +#825 = DIRECTION ( 'NONE', ( -1.360511966369934800E-015, -2.917627327316413300E-015, -1.000000000000000000 ) ) ; +#826 = VERTEX_POINT ( 'NONE', #1373 ) ; +#827 = PLANE ( 'NONE', #2288 ) ; +#828 = FACE_BOUND ( 'NONE', #738, .T. ) ; +#829 = ORIENTED_EDGE ( 'NONE', *, *, #1060, .F. ) ; +#830 = EDGE_CURVE ( 'NONE', #1791, #2504, #358, .T. ) ; +#831 = LINE ( 'NONE', #232, #243 ) ; +#832 = CIRCLE ( 'NONE', #1520, 1.750000000000001100 ) ; +#833 = EDGE_LOOP ( 'NONE', ( #1956 ) ) ; +#834 = VECTOR ( 'NONE', #816, 1000.000000000000000 ) ; +#835 = ORIENTED_EDGE ( 'NONE', *, *, #2365, .T. ) ; +#836 = FACE_OUTER_BOUND ( 'NONE', #2466, .T. ) ; +#837 = ORIENTED_EDGE ( 'NONE', *, *, #2440, .T. ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937053400, -21.67739658924493500, -18.15000000000000600 ) ) ; +#839 = VECTOR ( 'NONE', #2573, 1000.000000000000000 ) ; +#840 = VERTEX_POINT ( 'NONE', #2019 ) ; +#841 = ORIENTED_EDGE ( 'NONE', *, *, #1809, .F. ) ; +#842 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125782700E-017 ) ) ; +#843 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#844 = EDGE_CURVE ( 'NONE', #191, #1889, #1493, .T. ) ; +#845 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#846 = EDGE_CURVE ( 'NONE', #1851, #2025, #928, .T. ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, 4.650000000000001200 ) ) ; +#848 = VERTEX_POINT ( 'NONE', #2439 ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, 21.67739658924492800, -20.14999999999999500 ) ) ; +#850 = ADVANCED_FACE ( 'NONE', ( #2476 ), #92, .F. ) ; +#851 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#852 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ; +#853 = VERTEX_POINT ( 'NONE', #529 ) ; +#854 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, -17.35000000000000100 ) ) ; +#855 = CIRCLE ( 'NONE', #1713, 1.750000000000001100 ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#857 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #1202, #1641 ) ; +#858 = VECTOR ( 'NONE', #308, 1000.000000000000000 ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -12.69999999999999900 ) ) ; +#860 = ORIENTED_EDGE ( 'NONE', *, *, #1765, .F. ) ; +#861 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#862 = VECTOR ( 'NONE', #1700, 1000.000000000000000 ) ; +#863 = EDGE_CURVE ( 'NONE', #1358, #826, #864, .T. ) ; +#864 = LINE ( 'NONE', #2031, #1996 ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ; +#866 = FACE_OUTER_BOUND ( 'NONE', #1246, .T. ) ; +#867 = ADVANCED_FACE ( 'NONE', ( #1925, #287 ), #975, .T. ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #2602, .F. ) ; +#869 = VECTOR ( 'NONE', #2603, 1000.000000000000000 ) ; +#870 = EDGE_LOOP ( 'NONE', ( #2360, #1258, #242, #80 ) ) ; +#871 = PLANE ( 'NONE', #425 ) ; +#872 = AXIS2_PLACEMENT_3D ( 'NONE', #751, #1606, #313 ) ; +#873 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .F. ) ; +#874 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#875 = VECTOR ( 'NONE', #1742, 1000.000000000000100 ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, -31.65399872081853900, -20.15000000000003100 ) ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( -5.959332801240171800, 21.26882251811673900, -15.35000000000001900 ) ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #2246, .F. ) ; +#879 = DIRECTION ( 'NONE', ( 6.124977852475756900E-017, -8.366254228761971700E-033, 1.000000000000000000 ) ) ; +#880 = ADVANCED_FACE ( 'NONE', ( #2423, #217 ), #99, .T. ) ; +#881 = EDGE_CURVE ( 'NONE', #1055, #602, #1860, .T. ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, 31.75000000000000700, -19.04999999999999700 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( -41.19258710443459400, -21.90665156908910700, 1.411869291362268400 ) ) ; +#884 = AXIS2_PLACEMENT_3D ( 'NONE', #1574, #296, #1786 ) ; +#885 = VERTEX_POINT ( 'NONE', #2254 ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -4.141578998974845900, -17.37063690937623800, 10.09984830567204600 ) ) ; +#887 = EDGE_LOOP ( 'NONE', ( #1813 ) ) ; +#888 = FACE_OUTER_BOUND ( 'NONE', #1723, .T. ) ; +#889 = ADVANCED_FACE ( 'NONE', ( #1284, #1352 ), #2040, .T. ) ; +#890 = ORIENTED_EDGE ( 'NONE', *, *, #1946, .F. ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345416300, -22.73394224359666200, -12.55000000000001100 ) ) ; +#892 = VECTOR ( 'NONE', #1094, 1000.000000000000100 ) ; +#894 = FACE_BOUND ( 'NONE', #256, .T. ) ; +#893 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #1771, .NOT_KNOWN. ) ; +#895 = ORIENTED_EDGE ( 'NONE', *, *, #1627, .T. ) ; +#896 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#897 = FACE_OUTER_BOUND ( 'NONE', #322, .T. ) ; +#898 = ORIENTED_EDGE ( 'NONE', *, *, #631, .T. ) ; +#899 = VECTOR ( 'NONE', #1665, 1000.000000000000000 ) ; +#900 = VERTEX_POINT ( 'NONE', #983 ) ; +#901 = EDGE_CURVE ( 'NONE', #1960, #2556, #731, .T. ) ; +#902 = FACE_BOUND ( 'NONE', #423, .T. ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ; +#904 = AXIS2_PLACEMENT_3D ( 'NONE', #2044, #987, #2459 ) ; +#905 = ORIENTED_EDGE ( 'NONE', *, *, #1017, .F. ) ; +#906 = ORIENTED_EDGE ( 'NONE', *, *, #2076, .F. ) ; +#907 = ADVANCED_FACE ( 'NONE', ( #1221 ), #2045, .F. ) ; +#908 = ORIENTED_EDGE ( 'NONE', *, *, #1209, .T. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( -10.33107732308852000, -24.72855494203897200, -15.34999999999999800 ) ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166955800, 2.649999999999999500 ) ) ; +#911 = ORIENTED_EDGE ( 'NONE', *, *, #1162, .F. ) ; +#912 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #2296, #1021 ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( -38.86849884704084700, -26.89067492094501700, -4.586869291362387600 ) ) ; +#914 = EDGE_CURVE ( 'NONE', #1514, #2456, #144, .T. ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035900, -31.75000000000000000, -18.14999999999988500 ) ) ; +#916 = EDGE_CURVE ( 'NONE', #1358, #1791, #799, .T. ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -48.15318426992195100, 24.72611465046597000, 4.650000000000001200 ) ) ; +#918 = ORIENTED_EDGE ( 'NONE', *, *, #1946, .T. ) ; +#919 = ADVANCED_FACE ( 'NONE', ( #2363, #1725 ), #10, .F. ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -6.407348466566466200, -16.31409125502447600, 10.09984830567204600 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -5.811605263460792000, 2.709996040525698600, -7.150615998128679300E-016 ) ) ; +#922 = EDGE_LOOP ( 'NONE', ( #766 ) ) ; +#923 = ORIENTED_EDGE ( 'NONE', *, *, #863, .T. ) ; +#924 = FILL_AREA_STYLE_COLOUR ( '', #1321 ) ; +#925 = LINE ( 'NONE', #2022, #858 ) ; +#926 = ORIENTED_EDGE ( 'NONE', *, *, #1063, .T. ) ; +#927 = LINE ( 'NONE', #627, #424 ) ; +#928 = LINE ( 'NONE', #959, #426 ) ; +#929 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .F. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 12.69999999999999900 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -25.39999999999999900 ) ) ; +#932 = FACE_OUTER_BOUND ( 'NONE', #436, .T. ) ; +#933 = ORIENTED_EDGE ( 'NONE', *, *, #2489, .T. ) ; +#934 = EDGE_CURVE ( 'NONE', #1055, #1102, #1155, .T. ) ; +#935 = CIRCLE ( 'NONE', #1245, 1.750000000000001100 ) ; +#936 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .F. ) ; +#937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -3.403898548535812800E-015 ) ) ; +#938 = ADVANCED_FACE ( 'NONE', ( #663 ), #2067, .F. ) ; +#939 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#940 = EDGE_LOOP ( 'NONE', ( #1025 ) ) ; +#941 = EDGE_CURVE ( 'NONE', #1494, #2390, #1666, .T. ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, 25.40000000000000600, -25.39999999999999900 ) ) ; +#943 = VECTOR ( 'NONE', #677, 1000.000000000000000 ) ; +#944 = STYLED_ITEM ( 'NONE', ( #661 ), #1776 ) ; +#945 = DIRECTION ( 'NONE', ( -0.3659981507706706000, -0.7848855672213941300, -0.4999999999999999400 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( -45.21856676291189100, 13.27291032965379400, -4.088130708637633500 ) ) ; +#947 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#948 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#949 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#950 = AXIS2_PLACEMENT_3D ( 'NONE', #2343, #1491, #851 ) ; +#951 = EDGE_CURVE ( 'NONE', #89, #89, #2229, .T. ) ; +#952 = VERTEX_POINT ( 'NONE', #1901 ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, -0.1499999999999938900 ) ) ; +#954 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, 1.516186576881335000, 5.450000000000000200 ) ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #2112, .T. ) ; +#957 = ORIENTED_EDGE ( 'NONE', *, *, #2522, .F. ) ; +#958 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( -45.16024797310982600, -19.31347933586134900, 0.9131307086377289400 ) ) ; +#960 = VECTOR ( 'NONE', #822, 1000.000000000000100 ) ; +#961 = EDGE_LOOP ( 'NONE', ( #2097 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752413000, -31.75000000000000000, -129.5477436145402200 ) ) ; +#963 = VECTOR ( 'NONE', #879, 1000.000000000000000 ) ; +#964 = VECTOR ( 'NONE', #422, 1000.000000000000000 ) ; +#965 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ; +#966 = DIRECTION ( 'NONE', ( 0.9063077870366511600, -0.4226182617406970500, 5.551115123125782700E-017 ) ) ; +#967 = VECTOR ( 'NONE', #981, 1000.000000000000000 ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #1627, .F. ) ; +#969 = VECTOR ( 'NONE', #1461, 1000.000000000000100 ) ; +#970 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 4.323695644845964300E-015, -31.65399872081854600, 7.450000000000002000 ) ) ; +#972 = LINE ( 'NONE', #1975, #2560 ) ; +#973 = EDGE_LOOP ( 'NONE', ( #1635, #1731, #686, #1640, #2020, #926 ) ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, 31.75000000000000700, 6.349999999999994300 ) ) ; +#975 = PLANE ( 'NONE', #1150 ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ; +#977 = VERTEX_POINT ( 'NONE', #491 ) ; +#978 = EDGE_CURVE ( 'NONE', #1363, #2217, #583, .T. ) ; +#979 = EDGE_LOOP ( 'NONE', ( #188 ) ) ; +#980 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#982 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, -31.65399872081854600, 7.450000000000002000 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( -3.113365109630341600, -9.250121150031734600, 5.599848305672035800 ) ) ; +#985 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#986 = EDGE_CURVE ( 'NONE', #2309, #2309, #1097, .T. ) ; +#987 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( -8.731436723960261000, 21.29811460688040700, -13.27484830567190100 ) ) ; +#989 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .F. ) ; +#990 = DIRECTION ( 'NONE', ( -0.3659981507706688300, -0.7848855672213905800, 0.5000000000000068800 ) ) ; +#991 = EDGE_CURVE ( 'NONE', #775, #2262, #1592, .T. ) ; +#992 = VERTEX_POINT ( 'NONE', #634 ) ; +#993 = VECTOR ( 'NONE', #2071, 1000.000000000000000 ) ; +#994 = ORIENTED_EDGE ( 'NONE', *, *, #914, .F. ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909000, 31.74999999999999300, 6.718991938161258800 ) ) ; +#996 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #342, #787 ) ; +#997 = VECTOR ( 'NONE', #74, 1000.000000000000000 ) ; +#998 = EDGE_LOOP ( 'NONE', ( #43 ) ) ; +#999 = DIRECTION ( 'NONE', ( 0.2113091308703517700, 0.4531538935183239100, -0.8660254037844386000 ) ) ; +#1000 = FACE_OUTER_BOUND ( 'NONE', #1138, .T. ) ; +#1001 = VECTOR ( 'NONE', #1798, 1000.000000000000000 ) ; +#1002 = ORIENTED_EDGE ( 'NONE', *, *, #2280, .T. ) ; +#1003 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1503, 'distance_accuracy_value', 'NONE'); +#1004 = PLANE ( 'NONE', #334 ) ; +#1005 = VECTOR ( 'NONE', #982, 1000.000000000000000 ) ; +#1006 = VERTEX_POINT ( 'NONE', #1481 ) ; +#1007 = VECTOR ( 'NONE', #1280, 1000.000000000000000 ) ; +#1008 = ORIENTED_EDGE ( 'NONE', *, *, #916, .T. ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #2126, .F. ) ; +#1010 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688672800E-017 ) ) ; +#1011 = AXIS2_PLACEMENT_3D ( 'NONE', #1012, #351, #2471 ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( -38.86849884704084700, -26.89067492094501700, -4.586869291362387600 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -12.69999999999999900 ) ) ; +#1014 = VERTEX_POINT ( 'NONE', #1907 ) ; +#1015 = LINE ( 'NONE', #233, #2069 ) ; +#1016 = PLANE ( 'NONE', #1615 ) ; +#1017 = EDGE_CURVE ( 'NONE', #673, #145, #526, .T. ) ; +#1018 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1019 = DIRECTION ( 'NONE', ( 0.4226182617406971100, 0.9063077870366510500, 0.0000000000000000000 ) ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.75000000000000700, -19.04999999999999700 ) ) ; +#1021 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732199900, 22.83001686389458500, -12.69999999999999900 ) ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( -39.37596295652743100, -31.71791858412206000, 7.086586596968045300 ) ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( -5.959332801240165600, -21.26882251811672500, 2.650000000000001200 ) ) ; +#1025 = ORIENTED_EDGE ( 'NONE', *, *, #2166, .T. ) ; +#1026 = EDGE_CURVE ( 'NONE', #192, #1528, #456, .T. ) ; +#1027 = DIRECTION ( 'NONE', ( -6.124977852475733400E-017, -8.366254228761938800E-033, 1.000000000000000000 ) ) ; +#1028 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#1029 = VECTOR ( 'NONE', #2080, 1000.000000000000000 ) ; +#1030 = AXIS2_PLACEMENT_3D ( 'NONE', #665, #2545, #2541 ) ; +#1031 = ORIENTED_EDGE ( 'NONE', *, *, #1768, .T. ) ; +#1032 = LINE ( 'NONE', #1086, #1591 ) ; +#1033 = VECTOR ( 'NONE', #1326, 1000.000000000000000 ) ; +#1034 = ORIENTED_EDGE ( 'NONE', *, *, #1517, .T. ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( -45.16024797310982600, 19.31347933586134900, 0.9131307086377289400 ) ) ; +#1036 = AXIS2_PLACEMENT_3D ( 'NONE', #278, #2212, #937 ) ; +#1037 = VECTOR ( 'NONE', #1171, 1000.000000000000000 ) ; +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ; +#1039 = VECTOR ( 'NONE', #2287, 1000.000000000000100 ) ; +#1040 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ; +#1041 = VECTOR ( 'NONE', #1716, 1000.000000000000000 ) ; +#1042 = VECTOR ( 'NONE', #1092, 1000.000000000000000 ) ; +#1043 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ; +#1044 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1045 = VERTEX_POINT ( 'NONE', #1332 ) ; +#1046 = ORIENTED_EDGE ( 'NONE', *, *, #2487, .F. ) ; +#1047 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #1771 ) ) ; +#1048 = EDGE_CURVE ( 'NONE', #276, #1427, #2612, .T. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( -41.13426831463247200, -27.94722057529676100, -4.586869291362387600 ) ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143154500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#1052 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037200, -8.326672684688672800E-017 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( -3.111866415957604600E-015, -31.75000000000000000, 1.849999999999990500 ) ) ; +#1054 = DIRECTION ( 'NONE', ( -0.2113091308703547400, 0.4531538935183300800, -0.8660254037844347100 ) ) ; +#1055 = VERTEX_POINT ( 'NONE', #2345 ) ; +#1056 = AXIS2_PLACEMENT_3D ( 'NONE', #1456, #165, #1681 ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #1211, .T. ) ; +#1058 = DIRECTION ( 'NONE', ( -0.3659981507706660500, -0.7848855672213995700, -0.4999999999999946200 ) ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, -25.40000000000000600, 12.69999999999999900 ) ) ; +#1060 = EDGE_CURVE ( 'NONE', #2092, #1937, #500, .T. ) ; +#1061 = LINE ( 'NONE', #1207, #1622 ) ; +#1062 = EDGE_LOOP ( 'NONE', ( #1687, #620, #50, #1933 ) ) ; +#1063 = EDGE_CURVE ( 'NONE', #2139, #1655, #391, .T. ) ; +#1064 = LINE ( 'NONE', #1775, #1124 ) ; +#1065 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1066 = VERTEX_POINT ( 'NONE', #1751 ) ; +#1067 = VECTOR ( 'NONE', #1680, 1000.000000000000100 ) ; +#1068 = LINE ( 'NONE', #2370, #2170 ) ; +#1069 = ORIENTED_EDGE ( 'NONE', *, *, #1913, .T. ) ; +#1070 = FACE_BOUND ( 'NONE', #1341, .T. ) ; +#1071 = ORIENTED_EDGE ( 'NONE', *, *, #1162, .T. ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427361300, 25.39999999999999900, 12.69999999999999900 ) ) ; +#1073 = VECTOR ( 'NONE', #2175, 1000.000000000000100 ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #503, .T. ) ; +#1075 = ORIENTED_EDGE ( 'NONE', *, *, #2467, .F. ) ; +#1076 = VERTEX_POINT ( 'NONE', #2132 ) ; +#1077 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1078 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1079 = ADVANCED_FACE ( 'NONE', ( #894, #2027 ), #2571, .T. ) ; +#1080 = EDGE_CURVE ( 'NONE', #2105, #1336, #2501, .T. ) ; +#1081 = EDGE_CURVE ( 'NONE', #2004, #145, #318, .T. ) ; +#1082 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#1083 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1084 = AXIS2_PLACEMENT_3D ( 'NONE', #2520, #428, #1917 ) ; +#1085 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #291, #1572, #1782, #508 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.1741066334246328100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670597700, 0.9974755015670597700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1086 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, -25.39999999999999900 ) ) ; +#1087 = EDGE_LOOP ( 'NONE', ( #1458, #1385, #385, #933 ) ) ; +#1088 = ORIENTED_EDGE ( 'NONE', *, *, #1931, .F. ) ; +#1089 = ADVANCED_FACE ( 'NONE', ( #1955 ), #1333, .F. ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #830, .T. ) ; +#1091 = AXIS2_PLACEMENT_3D ( 'NONE', #1712, #861, #202 ) ; +#1092 = DIRECTION ( 'NONE', ( 6.124977852475756900E-017, -8.366254228761971700E-033, 1.000000000000000000 ) ) ; +#1093 = CIRCLE ( 'NONE', #472, 19.04999999999999700 ) ; +#1094 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#1095 = VERTEX_POINT ( 'NONE', #1139 ) ; +#1096 = EDGE_CURVE ( 'NONE', #1737, #1737, #832, .T. ) ; +#1097 = CIRCLE ( 'NONE', #382, 1.750000000000001100 ) ; +#1098 = EDGE_LOOP ( 'NONE', ( #1249 ) ) ; +#1099 = VECTOR ( 'NONE', #91, 1000.000000000000000 ) ; +#1100 = ORIENTED_EDGE ( 'NONE', *, *, #863, .F. ) ; +#1101 = VECTOR ( 'NONE', #2640, 1000.000000000000000 ) ; +#1102 = VERTEX_POINT ( 'NONE', #1772 ) ; +#1103 = LINE ( 'NONE', #2350, #2674 ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937033800, -21.67739658924489600, -0.1499999999999938900 ) ) ; +#1105 = ORIENTED_EDGE ( 'NONE', *, *, #846, .F. ) ; +#1106 = EDGE_LOOP ( 'NONE', ( #1485, #475, #2569, #1762 ) ) ; +#1107 = ADVANCED_FACE ( 'NONE', ( #2445 ), #1987, .T. ) ; +#1108 = VERTEX_POINT ( 'NONE', #2189 ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, 25.40000000000000600, -25.39999999999999900 ) ) ; +#1110 = ORIENTED_EDGE ( 'NONE', *, *, #2323, .T. ) ; +#1111 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1112 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#1113 = EDGE_CURVE ( 'NONE', #2504, #1557, #2552, .T. ) ; +#1114 = PLANE ( 'NONE', #2238 ) ; +#1115 = ADVANCED_FACE ( 'NONE', ( #244 ), #2215, .T. ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #1702, .F. ) ; +#1117 = DIRECTION ( 'NONE', ( -0.4226182617407037700, -0.9063077870366479400, 1.073081856240829400E-014 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( -41.35587586714707700, 21.55647768741074800, -17.35000000000000100 ) ) ; +#1119 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .F. ) ; +#1120 = LINE ( 'NONE', #791, #1690 ) ; +#1121 = VERTEX_POINT ( 'NONE', #1364 ) ; +#1122 = PLANE ( 'NONE', #2469 ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#1124 = VECTOR ( 'NONE', #509, 1000.000000000000000 ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #2602, .T. ) ; +#1126 = EDGE_CURVE ( 'NONE', #2062, #1494, #765, .T. ) ; +#1127 = PLANE ( 'NONE', #156 ) ; +#1128 = LINE ( 'NONE', #1449, #1067 ) ; +#1129 = ADVANCED_FACE ( 'NONE', ( #1311, #2389 ), #1797, .F. ) ; +#1130 = CYLINDRICAL_SURFACE ( 'NONE', #746, 1.749999999999997800 ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( -48.15318426992195100, -24.72611465046597000, 4.650000000000001200 ) ) ; +#1132 = LINE ( 'NONE', #2592, #563 ) ; +#1133 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .T. ) ; +#1134 = EDGE_CURVE ( 'NONE', #2171, #587, #691, .T. ) ; +#1135 = VECTOR ( 'NONE', #2249, 1000.000000000000100 ) ; +#1136 = LINE ( 'NONE', #1579, #567 ) ; +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #1784, .T. ) ; +#1138 = EDGE_LOOP ( 'NONE', ( #873 ) ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752411900, 31.75000000000000000, 5.450000000000009900 ) ) ; +#1140 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037200, -8.326672684688672800E-017 ) ) ; +#1141 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1142 = PLANE ( 'NONE', #1036 ) ; +#1143 = ADVANCED_FACE ( 'NONE', ( #108 ), #1158, .F. ) ; +#1144 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125782700E-017 ) ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, 21.67739658924494300, 1.850000000000001000 ) ) ; +#1146 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688674100E-017 ) ) ; +#1147 = EDGE_CURVE ( 'NONE', #853, #1212, #1185, .T. ) ; +#1148 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #2361, .F. ) ; +#1150 = AXIS2_PLACEMENT_3D ( 'NONE', #2613, #1173, #2625 ) ; +#1151 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ; +#1152 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1153 = LINE ( 'NONE', #800, #1218 ) ; +#1154 = DIRECTION ( 'NONE', ( 6.124977852475733400E-017, -8.366254228761938800E-033, -1.000000000000000000 ) ) ; +#1155 = LINE ( 'NONE', #356, #76 ) ; +#1156 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .T. ) ; +#1157 = VERTEX_POINT ( 'NONE', #1586 ) ; +#1158 = PLANE ( 'NONE', #168 ) ; +#1159 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 4.535039887899775800E-015 ) ) ; +#1160 = VECTOR ( 'NONE', #1811, 1000.000000000000000 ) ; +#1161 = ORIENTED_EDGE ( 'NONE', *, *, #1349, .F. ) ; +#1162 = EDGE_CURVE ( 'NONE', #479, #109, #38, .T. ) ; +#1163 = LINE ( 'NONE', #1206, #1039 ) ; +#1164 = ORIENTED_EDGE ( 'NONE', *, *, #1048, .F. ) ; +#1165 = EDGE_LOOP ( 'NONE', ( #329 ) ) ; +#1166 = AXIS2_PLACEMENT_3D ( 'NONE', #605, #376, #231 ) ; +#1167 = VERTEX_POINT ( 'NONE', #261 ) ; +#1168 = DIRECTION ( 'NONE', ( 0.2113091308703486700, -0.4531538935183260200, 0.8660254037844382600 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397158800, 19.69033990990234500, -20.14999999999998800 ) ) ; +#1170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, 21.67739658924489600, -12.55000000000001100 ) ) ; +#1173 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#1174 = PLANE ( 'NONE', #2177 ) ; +#1175 = EDGE_CURVE ( 'NONE', #1597, #840, #1753, .T. ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #1683, .T. ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, -20.21227686376499800, -17.34999999999997700 ) ) ; +#1178 = AXIS2_PLACEMENT_3D ( 'NONE', #343, #2636, #124 ) ; +#1179 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ; +#1180 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 5.551115123125782700E-017 ) ) ; +#1181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1182 = FACE_OUTER_BOUND ( 'NONE', #2679, .T. ) ; +#1183 = PLANE ( 'NONE', #2559 ) ; +#1184 = FACE_OUTER_BOUND ( 'NONE', #813, .T. ) ; +#1185 = LINE ( 'NONE', #528, #176 ) ; +#1186 = EDGE_LOOP ( 'NONE', ( #1582 ) ) ; +#1187 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#1188 = VECTOR ( 'NONE', #1870, 1000.000000000000100 ) ; +#1189 = VECTOR ( 'NONE', #262, 1000.000000000000000 ) ; +#1190 = LINE ( 'NONE', #484, #42 ) ; +#1191 = ORIENTED_EDGE ( 'NONE', *, *, #1063, .F. ) ; +#1192 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#1193 = LINE ( 'NONE', #1378, #46 ) ; +#1194 = CYLINDRICAL_SURFACE ( 'NONE', #95, 20.32000000000000000 ) ; +#1195 = ORIENTED_EDGE ( 'NONE', *, *, #1841, .F. ) ; +#1196 = EDGE_CURVE ( 'NONE', #1167, #1167, #2325, .T. ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 6.349999999999994300 ) ) ; +#1198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.5372787775435159400, -0.8434047161365325600 ) ) ; +#1199 = EDGE_CURVE ( 'NONE', #1014, #53, #1193, .T. ) ; +#1200 = ORIENTED_EDGE ( 'NONE', *, *, #2496, .F. ) ; +#1201 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #215, #2534, #2149, #876 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.1741066334246328100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670597700, 0.9974755015670597700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1202 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711754500, -31.75000000000000000, -19.04999999999999700 ) ) ; +#1204 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479774300, 22.73394224359666900, -20.14999999999999500 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, 20.21227686376500200, 4.650000000000001200 ) ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 6.349999999999994300 ) ) ; +#1208 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 6.349999999999994300 ) ) ; +#1209 = EDGE_CURVE ( 'NONE', #1212, #347, #1701, .T. ) ; +#1210 = EDGE_LOOP ( 'NONE', ( #1565, #1075, #658, #976 ) ) ; +#1211 = EDGE_CURVE ( 'NONE', #453, #2372, #635, .T. ) ; +#1212 = VERTEX_POINT ( 'NONE', #2624 ) ; +#1213 = LINE ( 'NONE', #648, #657 ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -25.39999999999999900 ) ) ; +#1215 = ORIENTED_EDGE ( 'NONE', *, *, #1880, .T. ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479774300, -22.73394224359668300, 1.850000000000001000 ) ) ; +#1217 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #944 ) ) ; +#1218 = VECTOR ( 'NONE', #1646, 1000.000000000000000 ) ; +#1219 = EDGE_LOOP ( 'NONE', ( #2275, #1164, #141, #2615, #1420, #420 ) ) ; +#1220 = COLOUR_RGB ( '',1.000000000000000000, 0.5019607843137254800, 0.5019607843137254800 ) ; +#1221 = FACE_OUTER_BOUND ( 'NONE', #2428, .T. ) ; +#1222 = ORIENTED_EDGE ( 'NONE', *, *, #2378, .F. ) ; +#1223 = VECTOR ( 'NONE', #2432, 1000.000000000000000 ) ; +#1224 = ORIENTED_EDGE ( 'NONE', *, *, #2701, .F. ) ; +#1225 = FACE_OUTER_BOUND ( 'NONE', #793, .T. ) ; +#1226 = EDGE_LOOP ( 'NONE', ( #487 ) ) ; +#1227 = DIRECTION ( 'NONE', ( 0.4226182617406970500, -0.9063077870366511600, -1.073081856240824500E-014 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, -29.11974387893085500, -25.40000000000000200 ) ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #649, .T. ) ; +#1230 = VERTEX_POINT ( 'NONE', #1118 ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711644300, 31.75000000000000000, -19.04999999999999700 ) ) ; +#1232 = EDGE_CURVE ( 'NONE', #1655, #225, #565, .T. ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.75000000000000700, 6.349999999999994300 ) ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732198600, 22.83001686389458100, -12.69999999999999900 ) ) ; +#1235 = DIRECTION ( 'NONE', ( 0.2113091308703486700, 0.4531538935183260200, 0.8660254037844382600 ) ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, -20.74688556425414600, 1.850000000000000800 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999400, -25.40000000000000600 ) ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187573500, -26.31215327778010900, -17.35000000000000100 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, 31.75000000000000700, -14.55000000000009300 ) ) ; +#1240 = VERTEX_POINT ( 'NONE', #974 ) ; +#1241 = EDGE_CURVE ( 'NONE', #603, #603, #494, .T. ) ; +#1242 = ORIENTED_EDGE ( 'NONE', *, *, #1966, .F. ) ; +#1243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1244 = LINE ( 'NONE', #438, #619 ) ; +#1245 = AXIS2_PLACEMENT_3D ( 'NONE', #2247, #966, #2442 ) ; +#1246 = EDGE_LOOP ( 'NONE', ( #388 ) ) ; +#1247 = LINE ( 'NONE', #1540, #1752 ) ; +#1248 = VECTOR ( 'NONE', #304, 1000.000000000000100 ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #951, .F. ) ; +#1250 = PLANE ( 'NONE', #2540 ) ; +#1251 = DIRECTION ( 'NONE', ( -0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1252 = FACE_BOUND ( 'NONE', #2398, .T. ) ; +#1253 = CYLINDRICAL_SURFACE ( 'NONE', #307, 1.750000000000002200 ) ; +#1254 = LINE ( 'NONE', #913, #2396 ) ; +#1255 = VERTEX_POINT ( 'NONE', #312 ) ; +#1256 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, 31.75000000000000700, 6.349999999999994300 ) ) ; +#1257 = LINE ( 'NONE', #1123, #2399 ) ; +#1258 = ORIENTED_EDGE ( 'NONE', *, *, #1838, .T. ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#1260 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .F. ) ; +#1261 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .T. ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493036400, -31.75000000000000000, -129.5477436145402200 ) ) ; +#1263 = EDGE_CURVE ( 'NONE', #1777, #1557, #2199, .T. ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, 5.450000000000000200 ) ) ; +#1265 = EDGE_CURVE ( 'NONE', #1528, #359, #2645, .T. ) ; +#1266 = DIRECTION ( 'NONE', ( -0.2113091308703547400, 0.4531538935183300800, -0.8660254037844347100 ) ) ; +#1267 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #1648, #368 ) ; +#1268 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1269 = ADVANCED_FACE ( 'NONE', ( #1070, #2271, #1564 ), #110, .F. ) ; +#1270 = PLANE ( 'NONE', #127 ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #1199, .T. ) ; +#1272 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1273 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1877, #2490, #2082, #820 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1274 = EDGE_LOOP ( 'NONE', ( #957 ) ) ; +#1275 = SURFACE_SIDE_STYLE ('',( #1858 ) ) ; +#1276 = LINE ( 'NONE', #2523, #1342 ) ; +#1277 = EDGE_LOOP ( 'NONE', ( #1969 ) ) ; +#1278 = EDGE_CURVE ( 'NONE', #2651, #826, #2588, .T. ) ; +#1279 = CIRCLE ( 'NONE', #2029, 1.749999999999998400 ) ; +#1280 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, -0.0000000000000000000 ) ) ; +#1281 = ORIENTED_EDGE ( 'NONE', *, *, #2089, .T. ) ; +#1282 = AXIS2_PLACEMENT_3D ( 'NONE', #2451, #1181, #2629 ) ; +#1283 = CIRCLE ( 'NONE', #652, 1.750000000000002200 ) ; +#1284 = FACE_BOUND ( 'NONE', #29, .T. ) ; +#1285 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .T. ) ; +#1286 = VECTOR ( 'NONE', #593, 1000.000000000000000 ) ; +#1287 = ADVANCED_FACE ( 'NONE', ( #2064, #1495 ), #1999, .F. ) ; +#1288 = EDGE_LOOP ( 'NONE', ( #2412 ) ) ; +#1289 = FACE_OUTER_BOUND ( 'NONE', #1291, .T. ) ; +#1290 = VERTEX_POINT ( 'NONE', #569 ) ; +#1291 = EDGE_LOOP ( 'NONE', ( #2335, #2136, #1088, #9 ) ) ; +#1292 = VERTEX_POINT ( 'NONE', #1308 ) ; +#1293 = EDGE_LOOP ( 'NONE', ( #186, #245, #397, #433, #461, #514, #664, #697, #2237, #745, #1100, #668 ) ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, 21.67739658924489600, 5.450000000000000200 ) ) ; +#1295 = DIRECTION ( 'NONE', ( 0.4226182617407037700, -0.9063077870366479400, -6.842277657836020900E-049 ) ) ; +#1296 = EDGE_CURVE ( 'NONE', #1800, #1619, #2532, .T. ) ; +#1297 = AXIS2_PLACEMENT_3D ( 'NONE', #2498, #1927, #1890 ) ; +#1298 = ADVANCED_FACE ( 'NONE', ( #932 ), #2478, .F. ) ; +#1299 = AXIS2_PLACEMENT_3D ( 'NONE', #2014, #744, #2228 ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, -31.75000000000000700, -0.1499999999999938900 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( -47.48433623050350900, 14.32945598400553600, -4.088130708637633500 ) ) ; +#1302 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .T. ) ; +#1303 = EDGE_LOOP ( 'NONE', ( #1312, #309, #221, #1642, #564, #1377 ) ) ; +#1304 = LINE ( 'NONE', #199, #687 ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711754500, -31.75000000000000000, -19.04999999999999700 ) ) ; +#1306 = ADVANCED_FACE ( 'NONE', ( #429 ), #1357, .T. ) ; +#1307 = VERTEX_POINT ( 'NONE', #1845 ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( -3.533768920313648600, -27.89819190509424700, 2.649999999999999500 ) ) ; +#1309 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ; +#1310 = EDGE_CURVE ( 'NONE', #1410, #2556, #1929, .T. ) ; +#1311 = FACE_BOUND ( 'NONE', #1288, .T. ) ; +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #2295, .T. ) ; +#1313 = FACE_BOUND ( 'NONE', #1468, .T. ) ; +#1314 = FACE_OUTER_BOUND ( 'NONE', #536, .T. ) ; +#1315 = LINE ( 'NONE', #267, #696 ) ; +#1316 = EDGE_LOOP ( 'NONE', ( #288, #1864, #1633, #550 ) ) ; +#1317 = AXIS2_PLACEMENT_3D ( 'NONE', #2465, #2277, #1839 ) ; +#1318 = CYLINDRICAL_SURFACE ( 'NONE', #2172, 1.750000000000001100 ) ; +#1319 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .F. ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#1321 = COLOUR_RGB ( '',1.000000000000000000, 0.5019607843137254800, 0.5019607843137254800 ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( -8.065307855496897100, -25.78510059639072700, 2.649999999999999500 ) ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, 1.516186576881335000, -0.1499999999999938900 ) ) ; +#1324 = VERTEX_POINT ( 'NONE', #1203 ) ; +#1325 = ADVANCED_FACE ( 'NONE', ( #866 ), #1016, .T. ) ; +#1326 = DIRECTION ( 'NONE', ( 0.4226182617406970500, 0.9063077870366511600, -1.073081856240824500E-014 ) ) ; +#1327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( -44.24845647290295900, 21.26882251811673900, -17.34999999999997700 ) ) ; +#1329 = EDGE_CURVE ( 'NONE', #952, #2305, #2427, .T. ) ; +#1330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1331 = EDGE_CURVE ( 'NONE', #2339, #225, #289, .T. ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( -34.55856746437218200, 18.38684072435551200, 4.650000000000001200 ) ) ; +#1333 = PLANE ( 'NONE', #1678 ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000700, -19.04999999999999700 ) ) ; +#1335 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1336 = VERTEX_POINT ( 'NONE', #136 ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #59, .T. ) ; +#1338 = DIRECTION ( 'NONE', ( 4.535039887899777400E-015, 9.725424424388032600E-015, 1.000000000000000000 ) ) ; +#1339 = ADVANCED_FACE ( 'NONE', ( #1863 ), #1660, .F. ) ; +#1340 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1341 = EDGE_LOOP ( 'NONE', ( #1624, #1754, #1478, #1802 ) ) ; +#1342 = VECTOR ( 'NONE', #1268, 1000.000000000000000 ) ; +#1343 = ORIENTED_EDGE ( 'NONE', *, *, #628, .F. ) ; +#1344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1345 = DIRECTION ( 'NONE', ( 0.4226182617406971100, 0.9063077870366510500, 0.0000000000000000000 ) ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000700, -19.04999999999999700 ) ) ; +#1347 = FACE_OUTER_BOUND ( 'NONE', #1219, .T. ) ; +#1348 = ORIENTED_EDGE ( 'NONE', *, *, #551, .T. ) ; +#1349 = EDGE_CURVE ( 'NONE', #1055, #1777, #733, .T. ) ; +#1350 = FACE_OUTER_BOUND ( 'NONE', #403, .T. ) ; +#1351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1352 = FACE_OUTER_BOUND ( 'NONE', #298, .T. ) ; +#1353 = ORIENTED_EDGE ( 'NONE', *, *, #1147, .F. ) ; +#1354 = EDGE_CURVE ( 'NONE', #1006, #1431, #147, .T. ) ; +#1355 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#1357 = CYLINDRICAL_SURFACE ( 'NONE', #1470, 6.350000000000001400 ) ; +#1358 = VERTEX_POINT ( 'NONE', #1231 ) ; +#1359 = VECTOR ( 'NONE', #2436, 1000.000000000000000 ) ; +#1360 = EDGE_LOOP ( 'NONE', ( #1261, #2223, #1501, #100 ) ) ; +#1361 = ADVANCED_FACE ( 'NONE', ( #362 ), #157, .T. ) ; +#1362 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #944 ), #1511 ) ; +#1363 = VERTEX_POINT ( 'NONE', #2011 ) ; +#1364 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831792100, 20.21227686376498100, -15.35000000000001900 ) ) ; +#1365 = DIRECTION ( 'NONE', ( -0.2113091308703462800, -0.4531538935183206400, 0.8660254037844418200 ) ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( 5.377642775528102000E-014, 20.31999999999999700, -25.41000000000001100 ) ) ; +#1367 = ORIENTED_EDGE ( 'NONE', *, *, #2701, .T. ) ; +#1368 = FACE_OUTER_BOUND ( 'NONE', #323, .T. ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 0.0000000000000000000 ) ) ; +#1370 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #84, #722, #2214, #942 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1371 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, -31.75000000000000700, -129.5477436145402200 ) ) ; +#1372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 6.349999999999994300 ) ) ; +#1374 = EDGE_CURVE ( 'NONE', #1095, #1066, #667, .T. ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393139766800, 0.4596409225297514700, -18.15000000000025800 ) ) ; +#1376 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #1763, #483 ) ; +#1377 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397158800, -19.69033990990234500, -20.14999999999998800 ) ) ; +#1379 = EDGE_LOOP ( 'NONE', ( #2065 ) ) ; +#1380 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366510500, 3.219245568722476800E-015 ) ) ; +#1381 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .T. ) ; +#1382 = ORIENTED_EDGE ( 'NONE', *, *, #1536, .T. ) ; +#1383 = LINE ( 'NONE', #1694, #2444 ) ; +#1384 = PLANE ( 'NONE', #2115 ) ; +#1385 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ; +#1386 = VECTOR ( 'NONE', #2178, 1000.000000000000100 ) ; +#1387 = VECTOR ( 'NONE', #2579, 1000.000000000000000 ) ; +#1388 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .F. ) ; +#1389 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1390 = CIRCLE ( 'NONE', #1267, 1.749999999999998400 ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .F. ) ; +#1392 = EDGE_CURVE ( 'NONE', #1121, #192, #2366, .T. ) ; +#1393 = FACE_BOUND ( 'NONE', #812, .T. ) ; +#1394 = EDGE_LOOP ( 'NONE', ( #2303 ) ) ; +#1395 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125782700E-017 ) ) ; +#1396 = VERTEX_POINT ( 'NONE', #2604 ) ; +#1397 = VECTOR ( 'NONE', #2405, 1000.000000000000000 ) ; +#1398 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ; +#1399 = AXIS2_PLACEMENT_3D ( 'NONE', #1375, #90, #1595 ) ; +#1400 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, -21.67739658924489600, 5.450000000000000200 ) ) ; +#1402 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( 5.095300194039256200E-013, -31.75000000000000000, -18.14999999999994500 ) ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( -7.325725897450671400, -24.19906196907660200, -15.34999999999999800 ) ) ; +#1405 = DIRECTION ( 'NONE', ( -0.4226182617407026600, 0.9063077870366483800, 0.0000000000000000000 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140391900, -0.4596409225296179700, -12.55000000000009800 ) ) ; +#1407 = EDGE_CURVE ( 'NONE', #20, #20, #79, .T. ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, -20.21227686376499800, -17.34999999999997700 ) ) ; +#1409 = EDGE_CURVE ( 'NONE', #2262, #1937, #2302, .T. ) ; +#1410 = VERTEX_POINT ( 'NONE', #1806 ) ; +#1411 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688674100E-017 ) ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( -39.37596295652743100, 31.71791858412206000, 7.086586596968043500 ) ) ; +#1413 = AXIS2_PLACEMENT_3D ( 'NONE', #2644, #792, #2282 ) ; +#1414 = EDGE_LOOP ( 'NONE', ( #1983, #903, #2452, #2235 ) ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, -19.04999999999999700 ) ) ; +#1416 = LINE ( 'NONE', #2100, #797 ) ; +#1417 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .T. ) ; +#1418 = DIRECTION ( 'NONE', ( -0.2113091308703547400, -0.4531538935183300800, -0.8660254037844347100 ) ) ; +#1419 = CIRCLE ( 'NONE', #1602, 1.750000000000001100 ) ; +#1420 = ORIENTED_EDGE ( 'NONE', *, *, #2630, .T. ) ; +#1421 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, -21.67739658924489600, 5.450000000000000200 ) ) ; +#1422 = FACE_OUTER_BOUND ( 'NONE', #961, .T. ) ; +#1423 = VECTOR ( 'NONE', #2241, 1000.000000000000000 ) ; +#1424 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#1425 = CARTESIAN_POINT ( 'NONE', ( -38.86849884704084700, 26.89067492094501700, -4.586869291362387600 ) ) ; +#1426 = VECTOR ( 'NONE', #999, 1000.000000000000100 ) ; +#1427 = VERTEX_POINT ( 'NONE', #737 ) ; +#1428 = CIRCLE ( 'NONE', #401, 1.750000000000001100 ) ; +#1429 = ORIENTED_EDGE ( 'NONE', *, *, #2487, .T. ) ; +#1430 = DIRECTION ( 'NONE', ( -0.4226182617406971700, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1431 = VERTEX_POINT ( 'NONE', #2437 ) ; +#1432 = EDGE_CURVE ( 'NONE', #2651, #1496, #1669, .T. ) ; +#1433 = EDGE_LOOP ( 'NONE', ( #1031, #115, #394, #1388 ) ) ; +#1434 = VECTOR ( 'NONE', #1526, 1000.000000000000000 ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493036400, 31.75000000000000000, -129.5477436145402200 ) ) ; +#1436 = AXIS2_PLACEMENT_3D ( 'NONE', #1610, #755, #1817 ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, -31.65399872081853900, -20.15000000000003100 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000700, -19.04999999999999700 ) ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, -31.75000000000000700, -129.5477436145402200 ) ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937053400, 21.67739658924493500, -18.15000000000000600 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( -44.24845647290295900, 21.26882251811674300, 4.650000000000001200 ) ) ; +#1442 = EDGE_CURVE ( 'NONE', #1095, #1290, #14, .T. ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( -36.61751815912121100, 31.71791858412206000, 7.086586596968043500 ) ) ; +#1444 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #1146, #2599 ) ; +#1445 = VERTEX_POINT ( 'NONE', #310 ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, 31.75000000000000700, -0.1499999999999938900 ) ) ; +#1447 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .F. ) ; +#1448 = PLANE ( 'NONE', #1852 ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, 21.67739658924492800, -20.14999999999999500 ) ) ; +#1450 = AXIS2_PLACEMENT_3D ( 'NONE', #729, #2218, #948 ) ; +#1451 = LINE ( 'NONE', #1440, #314 ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #818, .F. ) ; +#1453 = FACE_OUTER_BOUND ( 'NONE', #2057, .T. ) ; +#1454 = VECTOR ( 'NONE', #2407, 1000.000000000000100 ) ; +#1455 = EDGE_LOOP ( 'NONE', ( #1698 ) ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( -40.61629390910085400, 23.14251631472488700, 4.650000000000001200 ) ) ; +#1457 = FACE_OUTER_BOUND ( 'NONE', #1963, .T. ) ; +#1458 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .F. ) ; +#1459 = LINE ( 'NONE', #2681, #969 ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ; +#1461 = DIRECTION ( 'NONE', ( 0.2113091308703492800, -0.4531538935183185800, -0.8660254037844420400 ) ) ; +#1462 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1463 = CIRCLE ( 'NONE', #1444, 1.749999999999999100 ) ; +#1464 = ORIENTED_EDGE ( 'NONE', *, *, #474, .F. ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #2661, .T. ) ; +#1466 = EDGE_LOOP ( 'NONE', ( #637, #908, #1949, #890 ) ) ; +#1467 = EDGE_CURVE ( 'NONE', #1410, #1816, #530, .T. ) ; +#1468 = EDGE_LOOP ( 'NONE', ( #2536 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752413000, 31.75000000000000000, -129.5477436145402200 ) ) ; +#1470 = AXIS2_PLACEMENT_3D ( 'NONE', #1415, #1643, #2649 ) ; +#1471 = PLANE ( 'NONE', #2058 ) ; +#1472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.215678053048507800E-016 ) ) ; +#1473 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1474 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, 0.0000000000000000000 ) ) ; +#1475 = AXIS2_PLACEMENT_3D ( 'NONE', #1049, #2507, #1243 ) ; +#1476 = DIRECTION ( 'NONE', ( -0.4226182617406971700, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1477 = EDGE_CURVE ( 'NONE', #900, #2092, #2671, .T. ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #2131, .T. ) ; +#1479 = EDGE_CURVE ( 'NONE', #2242, #2242, #597, .T. ) ; +#1480 = ORIENTED_EDGE ( 'NONE', *, *, #1880, .F. ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.75000000000000700, -19.04999999999999700 ) ) ; +#1482 = DIRECTION ( 'NONE', ( -0.4226182617406971700, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1483 = LINE ( 'NONE', #378, #348 ) ; +#1484 = AXIS2_PLACEMENT_3D ( 'NONE', #606, #825, #2314 ) ; +#1485 = ORIENTED_EDGE ( 'NONE', *, *, #395, .T. ) ; +#1486 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1305, #2561, #1744, #470 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1487 = VECTOR ( 'NONE', #2434, 1000.000000000000100 ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166955800, 2.649999999999999500 ) ) ; +#1489 = ADVANCED_FACE ( 'NONE', ( #458, #2614 ), #393, .F. ) ; +#1490 = EDGE_LOOP ( 'NONE', ( #956 ) ) ; +#1491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1492 = FACE_OUTER_BOUND ( 'NONE', #1414, .T. ) ; +#1493 = LINE ( 'NONE', #87, #1423 ) ; +#1494 = VERTEX_POINT ( 'NONE', #763 ) ; +#1495 = FACE_OUTER_BOUND ( 'NONE', #1455, .T. ) ; +#1496 = VERTEX_POINT ( 'NONE', #2253 ) ; +#1497 = LINE ( 'NONE', #1356, #364 ) ; +#1498 = EDGE_LOOP ( 'NONE', ( #235 ) ) ; +#1499 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407036000, 0.0000000000000000000 ) ) ; +#1500 = DIRECTION ( 'NONE', ( -0.2113091308703516600, 0.4531538935183234100, -0.8660254037844389300 ) ) ; +#1501 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .F. ) ; +#1502 = ORIENTED_EDGE ( 'NONE', *, *, #1738, .F. ) ; +#1503 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1504 = ORIENTED_EDGE ( 'NONE', *, *, #354, .T. ) ; +#1505 = LINE ( 'NONE', #1301, #1434 ) ; +#1506 = EDGE_CURVE ( 'NONE', #554, #1777, #2094, .T. ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140391900, 0.4596409225296179700, -12.55000000000009800 ) ) ; +#1508 = EDGE_CURVE ( 'NONE', #539, #1800, #2554, .T. ) ; +#1509 = ADVANCED_FACE ( 'NONE', ( #897 ), #106, .F. ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345433200, -22.73394224359669400, -18.15000000000000600 ) ) ; +#1511 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1003 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1503, #213, #1714 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1512 = DIRECTION ( 'NONE', ( 0.2113091308703486700, 0.4531538935183260200, 0.8660254037844382600 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479774300, 22.73394224359668300, 1.850000000000001000 ) ) ; +#1514 = VERTEX_POINT ( 'NONE', #1177 ) ; +#1515 = ADVANCED_FACE ( 'NONE', ( #2503, #1524 ), #2457, .F. ) ; +#1516 = ORIENTED_EDGE ( 'NONE', *, *, #672, .T. ) ; +#1517 = EDGE_CURVE ( 'NONE', #1816, #2171, #1596, .T. ) ; +#1518 = CIRCLE ( 'NONE', #1056, 1.750000000000001100 ) ; +#1519 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .F. ) ; +#1520 = AXIS2_PLACEMENT_3D ( 'NONE', #2414, #1144, #2591 ) ; +#1521 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1522 = LINE ( 'NONE', #1951, #1386 ) ; +#1523 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .F. ) ; +#1524 = FACE_OUTER_BOUND ( 'NONE', #11, .T. ) ; +#1525 = ORIENTED_EDGE ( 'NONE', *, *, #783, .F. ) ; +#1526 = DIRECTION ( 'NONE', ( -0.2113091308703462800, -0.4531538935183206400, 0.8660254037844418200 ) ) ; +#1527 = VECTOR ( 'NONE', #1656, 1000.000000000000100 ) ; +#1528 = VERTEX_POINT ( 'NONE', #1837 ) ; +#1529 = VERTEX_POINT ( 'NONE', #2050 ) ; +#1530 = LINE ( 'NONE', #883, #1603 ) ; +#1531 = ORIENTED_EDGE ( 'NONE', *, *, #2440, .F. ) ; +#1532 = ADVANCED_FACE ( 'NONE', ( #1957, #1457 ), #1896, .F. ) ; +#1533 = VERTEX_POINT ( 'NONE', #1769 ) ; +#1534 = ORIENTED_EDGE ( 'NONE', *, *, #2256, .F. ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905597000, -1.516186576881511000, -18.15000000000025800 ) ) ; +#1536 = EDGE_CURVE ( 'NONE', #1240, #885, #69, .T. ) ; +#1537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.5372787775435212700, -0.8434047161365291200 ) ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( -36.61751815912121100, -31.71791858412206000, 7.086586596968045300 ) ) ; +#1539 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #753 ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720609000, -21.67739658924494600, 7.450000000000002000 ) ) ; +#1541 = ADVANCED_FACE ( 'NONE', ( #247 ), #2063, .T. ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( -41.35587586714707700, -21.55647768741074800, 4.650000000000001200 ) ) ; +#1543 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#1544 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ; +#1545 = EDGE_LOOP ( 'NONE', ( #482 ) ) ; +#1546 = DIRECTION ( 'NONE', ( -0.4226182617406983300, 0.9063077870366504900, 0.0000000000000000000 ) ) ; +#1547 = PLANE ( 'NONE', #2553 ) ; +#1548 = ORIENTED_EDGE ( 'NONE', *, *, #610, .T. ) ; +#1549 = EDGE_CURVE ( 'NONE', #1677, #1677, #1390, .T. ) ; +#1550 = LINE ( 'NONE', #1657, #2638 ) ; +#1551 = PLANE ( 'NONE', #750 ) ; +#1552 = ORIENTED_EDGE ( 'NONE', *, *, #2076, .T. ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( -8.065307855496900700, -25.78510059639073400, -15.34999999999999800 ) ) ; +#1554 = LINE ( 'NONE', #2601, #421 ) ; +#1555 = EDGE_CURVE ( 'NONE', #413, #1937, #178, .T. ) ; +#1556 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 2.891671490101913400E-049 ) ) ; +#1557 = VERTEX_POINT ( 'NONE', #1013 ) ; +#1558 = VECTOR ( 'NONE', #2502, 1000.000000000000100 ) ; +#1559 = ADVANCED_FACE ( 'NONE', ( #1313, #1252, #2392 ), #580, .F. ) ; +#1560 = LINE ( 'NONE', #740, #2061 ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #55, .F. ) ; +#1562 = DIRECTION ( 'NONE', ( 0.3659981507706706000, -0.7848855672213941300, 0.4999999999999999400 ) ) ; +#1563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.215678053048507800E-016 ) ) ; +#1564 = FACE_BOUND ( 'NONE', #386, .T. ) ; +#1565 = ORIENTED_EDGE ( 'NONE', *, *, #1048, .T. ) ; +#1566 = LINE ( 'NONE', #300, #2590 ) ; +#1567 = EDGE_LOOP ( 'NONE', ( #2351 ) ) ; +#1568 = PLANE ( 'NONE', #1450 ) ; +#1569 = VERTEX_POINT ( 'NONE', #2660 ) ; +#1570 = ORIENTED_EDGE ( 'NONE', *, *, #1536, .F. ) ; +#1571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -6.201209522363663400E-049 ) ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.75000000000000700, -19.41899193816127300 ) ) ; +#1573 = DIRECTION ( 'NONE', ( 5.668799859874739000E-017, 1.215678053048507800E-016, -1.000000000000000000 ) ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187573500, -26.31215327778010900, 4.650000000000001200 ) ) ; +#1575 = ADVANCED_FACE ( 'NONE', ( #112 ), #2483, .F. ) ; +#1576 = EDGE_CURVE ( 'NONE', #1427, #1691, #2328, .T. ) ; +#1577 = PRODUCT_CONTEXT ( 'NONE', #505, 'mechanical' ) ; +#1578 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #12, #824, #651, #1 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1579 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, 5.450000000000009900 ) ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345413600, 22.73394224359666200, -0.1499999999999938900 ) ) ; +#1581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1582 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .F. ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 6.349999999999994300 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#1585 = VERTEX_POINT ( 'NONE', #2301 ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412100, 31.75000000000000000, -12.55000000000000600 ) ) ; +#1587 = VECTOR ( 'NONE', #400, 1000.000000000000100 ) ; +#1588 = ORIENTED_EDGE ( 'NONE', *, *, #978, .F. ) ; +#1589 = EDGE_CURVE ( 'NONE', #2700, #109, #693, .T. ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, 12.69999999999999900 ) ) ; +#1591 = VECTOR ( 'NONE', #2148, 1000.000000000000000 ) ; +#1592 = LINE ( 'NONE', #1053, #2669 ) ; +#1593 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .T. ) ; +#1594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1595 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 9.725424424388045300E-015 ) ) ; +#1596 = LINE ( 'NONE', #1406, #321 ) ; +#1597 = VERTEX_POINT ( 'NONE', #2492 ) ; +#1598 = CIRCLE ( 'NONE', #785, 1.750000000000002200 ) ; +#1599 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ; +#1600 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 1.587263960764953600E-015 ) ) ; +#1601 = LINE ( 'NONE', #1507, #1041 ) ; +#1602 = AXIS2_PLACEMENT_3D ( 'NONE', #757, #2251, #980 ) ; +#1603 = VECTOR ( 'NONE', #167, 1000.000000000000100 ) ; +#1604 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ; +#1605 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937033800, 21.67739658924489600, -0.1499999999999938900 ) ) ; +#1606 = DIRECTION ( 'NONE', ( 0.3659981507706688300, -0.7848855672213905800, -0.5000000000000068800 ) ) ; +#1607 = VERTEX_POINT ( 'NONE', #2576 ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397161600, -19.69033990990226400, -14.54999999999996000 ) ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, -17.35000000000000100 ) ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, -3.002671082198546400E-015 ) ) ; +#1611 = DIRECTION ( 'NONE', ( -6.124977852475756900E-017, -8.366254228761971700E-033, -1.000000000000000000 ) ) ; +#1612 = EDGE_CURVE ( 'NONE', #734, #68, #1825, .T. ) ; +#1613 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, -5.551115123125782700E-017 ) ) ; +#1614 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1615 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #2656, #1430 ) ; +#1616 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905597000, 1.516186576881511000, -18.15000000000025800 ) ) ; +#1618 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#1619 = VERTEX_POINT ( 'NONE', #1024 ) ; +#1620 = DIRECTION ( 'NONE', ( -0.4226182617407034900, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1621 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .F. ) ; +#1622 = VECTOR ( 'NONE', #1647, 1000.000000000000000 ) ; +#1623 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999400, 12.69999999999999900 ) ) ; +#1624 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ; +#1625 = LINE ( 'NONE', #2006, #997 ) ; +#1626 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .F. ) ; +#1627 = EDGE_CURVE ( 'NONE', #1410, #239, #1755, .T. ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, -22.76974387893084600 ) ) ; +#1629 = LINE ( 'NONE', #2101, #2641 ) ; +#1630 = VECTOR ( 'NONE', #1881, 1000.000000000000100 ) ; +#1631 = EDGE_CURVE ( 'NONE', #2262, #639, #629, .T. ) ; +#1632 = LINE ( 'NONE', #931, #492 ) ; +#1633 = ORIENTED_EDGE ( 'NONE', *, *, #26, .T. ) ; +#1634 = VECTOR ( 'NONE', #328, 1000.000000000000000 ) ; +#1635 = ORIENTED_EDGE ( 'NONE', *, *, #1232, .T. ) ; +#1636 = FACE_OUTER_BOUND ( 'NONE', #1165, .T. ) ; +#1637 = VERTEX_POINT ( 'NONE', #2494 ) ; +#1638 = EDGE_LOOP ( 'NONE', ( #1743 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, 5.450000000000000200 ) ) ; +#1640 = ORIENTED_EDGE ( 'NONE', *, *, #780, .T. ) ; +#1641 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1642 = ORIENTED_EDGE ( 'NONE', *, *, #2411, .T. ) ; +#1643 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1645 = ORIENTED_EDGE ( 'NONE', *, *, #2112, .F. ) ; +#1646 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 1.587263960764953600E-015 ) ) ; +#1647 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1648 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 5.551115123125782700E-017 ) ) ; +#1649 = EDGE_CURVE ( 'NONE', #1667, #190, #2267, .T. ) ; +#1650 = CARTESIAN_POINT ( 'NONE', ( -36.61751815912123200, 31.71791858412207400, -19.78658659696806400 ) ) ; +#1651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, 31.75000000000000700, 6.349999999999994300 ) ) ; +#1653 = EDGE_CURVE ( 'NONE', #1750, #2184, #1128, .T. ) ; +#1654 = EDGE_LOOP ( 'NONE', ( #517, #878, #1828, #772 ) ) ; +#1655 = VERTEX_POINT ( 'NONE', #162 ) ; +#1656 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366510500, -1.341352320301034800E-016 ) ) ; +#1657 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 12.69999999999999900 ) ) ; +#1658 = DIRECTION ( 'NONE', ( -2.031697869779098000E-017, -0.5372787775435272600, -0.8434047161365253500 ) ) ; +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #576, .T. ) ; +#1660 = PLANE ( 'NONE', #2183 ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .T. ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#1663 = FACE_BOUND ( 'NONE', #2706, .T. ) ; +#1664 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .F. ) ; +#1665 = DIRECTION ( 'NONE', ( -0.4226182617407037700, 0.9063077870366479400, 1.073081856240829400E-014 ) ) ; +#1666 = CIRCLE ( 'NONE', #2012, 20.32000000000000000 ) ; +#1667 = VERTEX_POINT ( 'NONE', #1441 ) ; +#1668 = DIRECTION ( 'NONE', ( 0.2113091308703517700, -0.4531538935183239100, -0.8660254037844386000 ) ) ; +#1669 = LINE ( 'NONE', #1584, #1099 ) ; +#1670 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .T. ) ; +#1671 = CYLINDRICAL_SURFACE ( 'NONE', #341, 1.749999999999997800 ) ; +#1672 = ORIENTED_EDGE ( 'NONE', *, *, #337, .F. ) ; +#1673 = DIRECTION ( 'NONE', ( 4.535039887899871300E-015, 9.725424424388045300E-015, 1.000000000000000000 ) ) ; +#1674 = ORIENTED_EDGE ( 'NONE', *, *, #1768, .F. ) ; +#1675 = EDGE_CURVE ( 'NONE', #1290, #1637, #1629, .T. ) ; +#1676 = EDGE_LOOP ( 'NONE', ( #1040, #865, #573, #2192, #841 ) ) ; +#1677 = VERTEX_POINT ( 'NONE', #703 ) ; +#1678 = AXIS2_PLACEMENT_3D ( 'NONE', #709, #1562, #273 ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( -9.591495365042282700, 23.14251631472483000, 2.649999999999999500 ) ) ; +#1680 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#1681 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1682 = DIRECTION ( 'NONE', ( -0.2113091308703485000, -0.4531538935183253000, 0.8660254037844387100 ) ) ; +#1683 = EDGE_CURVE ( 'NONE', #2105, #1619, #489, .T. ) ; +#1684 = DIRECTION ( 'NONE', ( 6.124977852475756900E-017, -8.366254228761971700E-033, 1.000000000000000000 ) ) ; +#1685 = ORIENTED_EDGE ( 'NONE', *, *, #1147, .T. ) ; +#1686 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#1687 = ORIENTED_EDGE ( 'NONE', *, *, #1081, .F. ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427361300, 25.39999999999999900, 12.69999999999999900 ) ) ; +#1689 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#1690 = VECTOR ( 'NONE', #2281, 1000.000000000000000 ) ; +#1691 = VERTEX_POINT ( 'NONE', #1239 ) ; +#1692 = FACE_OUTER_BOUND ( 'NONE', #615, .T. ) ; +#1693 = EDGE_LOOP ( 'NONE', ( #1381, #365, #363, #1685, #616 ) ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( -3.113365109630341600, 9.250121150031734600, 5.599848305672035800 ) ) ; +#1695 = VECTOR ( 'NONE', #384, 1000.000000000000000 ) ; +#1696 = LINE ( 'NONE', #224, #2194 ) ; +#1697 = FACE_OUTER_BOUND ( 'NONE', #315, .T. ) ; +#1698 = ORIENTED_EDGE ( 'NONE', *, *, #520, .F. ) ; +#1699 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #5, #669, #2154, #882 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 2.967486020165160700, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670597700, 0.9974755015670597700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1700 = DIRECTION ( 'NONE', ( -6.124977852475756900E-017, -8.366254228761971700E-033, -1.000000000000000000 ) ) ; +#1701 = LINE ( 'NONE', #1605, #1135 ) ; +#1702 = EDGE_CURVE ( 'NONE', #1108, #1108, #2692, .T. ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187573500, 26.31215327778010900, 4.650000000000001200 ) ) ; +#1704 = FACE_OUTER_BOUND ( 'NONE', #1903, .T. ) ; +#1705 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .F. ) ; +#1706 = EDGE_LOOP ( 'NONE', ( #1337, #345, #868, #1664 ) ) ; +#1707 = EDGE_CURVE ( 'NONE', #1307, #2184, #2584, .T. ) ; +#1708 = CARTESIAN_POINT ( 'NONE', ( -0.8475956420387212900, 10.30666680438349500, 5.599848305672035800 ) ) ; +#1709 = ADVANCED_FACE ( 'NONE', ( #1000 ), #2319, .T. ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427469600, -25.39999999999999900, -25.39999999999999900 ) ) ; +#1711 = DIRECTION ( 'NONE', ( -0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -19.04999999999999700 ) ) ; +#1713 = AXIS2_PLACEMENT_3D ( 'NONE', #1238, #2682, #1462 ) ; +#1714 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1715 = ADVANCED_FACE ( 'NONE', ( #2060, #357 ), #1993, .F. ) ; +#1716 = DIRECTION ( 'NONE', ( 0.4226182617407037700, -0.9063077870366479400, -3.755786496842899800E-015 ) ) ; +#1717 = EDGE_LOOP ( 'NONE', ( #2140 ) ) ; +#1718 = EDGE_CURVE ( 'NONE', #524, #2456, #927, .T. ) ; +#1719 = ORIENTED_EDGE ( 'NONE', *, *, #477, .T. ) ; +#1720 = ORIENTED_EDGE ( 'NONE', *, *, #2073, .T. ) ; +#1721 = FACE_BOUND ( 'NONE', #2033, .T. ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345416300, -22.73394224359666200, 5.450000000000000200 ) ) ; +#1723 = EDGE_LOOP ( 'NONE', ( #2488, #2334, #1229, #214, #598, #1534 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -42.88206337669247900, -24.19906196907662700, 4.650000000000001200 ) ) ; +#1725 = FACE_OUTER_BOUND ( 'NONE', #1274, .T. ) ; +#1726 = ORIENTED_EDGE ( 'NONE', *, *, #941, .T. ) ; +#1727 = VECTOR ( 'NONE', #2667, 1000.000000000000100 ) ; +#1728 = ADVANCED_FACE ( 'NONE', ( #1422, #2527 ), #1924, .F. ) ; +#1729 = VERTEX_POINT ( 'NONE', #1059 ) ; +#1730 = CIRCLE ( 'NONE', #2260, 1.750000000000002200 ) ; +#1731 = ORIENTED_EDGE ( 'NONE', *, *, #1331, .F. ) ; +#1732 = EDGE_LOOP ( 'NONE', ( #1674, #1936, #970, #1008, #1525, #1402, #1991, #223 ) ) ; +#1733 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166956900, -15.34999999999999800 ) ) ; +#1734 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .T. ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( -3.111866415957604600E-015, 31.75000000000000000, 1.849999999999990500 ) ) ; +#1736 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ; +#1737 = VERTEX_POINT ( 'NONE', #1542 ) ; +#1738 = EDGE_CURVE ( 'NONE', #538, #538, #286, .T. ) ; +#1739 = AXIS2_PLACEMENT_3D ( 'NONE', #2626, #1395, #101 ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, 31.65399872081854600, 7.450000000000002000 ) ) ; +#1741 = ADVANCED_FACE ( 'NONE', ( #1492 ), #2517, .F. ) ; +#1742 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366510500, 3.219245568722476800E-015 ) ) ; +#1743 = ORIENTED_EDGE ( 'NONE', *, *, #306, .T. ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548131400, -29.11974387893084400, -25.40000000000000200 ) ) ; +#1745 = CARTESIAN_POINT ( 'NONE', ( -8.065307855496897100, 25.78510059639072700, 2.649999999999999500 ) ) ; +#1746 = EDGE_CURVE ( 'NONE', #1816, #1960, #2475, .T. ) ; +#1747 = EDGE_LOOP ( 'NONE', ( #77, #1958, #1353, #353 ) ) ; +#1748 = FACE_BOUND ( 'NONE', #1926, .T. ) ; +#1749 = ADVANCED_FACE ( 'NONE', ( #1350, #805 ), #730, .F. ) ; +#1750 = VERTEX_POINT ( 'NONE', #849 ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, 31.75000000000000000, 5.450000000000000200 ) ) ; +#1752 = VECTOR ( 'NONE', #1972, 1000.000000000000100 ) ; +#1753 = LINE ( 'NONE', #2240, #624 ) ; +#1754 = ORIENTED_EDGE ( 'NONE', *, *, #281, .F. ) ; +#1755 = LINE ( 'NONE', #1879, #1695 ) ; +#1756 = FACE_OUTER_BOUND ( 'NONE', #625, .T. ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( -8.065307855496900700, 25.78510059639073400, -15.34999999999999800 ) ) ; +#1758 = FACE_OUTER_BOUND ( 'NONE', #1706, .T. ) ; +#1759 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ; +#1760 = FACE_OUTER_BOUND ( 'NONE', #1106, .T. ) ; +#1761 = EDGE_LOOP ( 'NONE', ( #1795, #759, #698, #2083 ) ) ; +#1762 = ORIENTED_EDGE ( 'NONE', *, *, #1841, .T. ) ; +#1763 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#1764 = DIRECTION ( 'NONE', ( -6.124977852475733400E-017, -8.366254228761938800E-033, 1.000000000000000000 ) ) ; +#1765 = EDGE_CURVE ( 'NONE', #2677, #2677, #1283, .T. ) ; +#1766 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -0.1499999999999834800 ) ) ; +#1767 = ADVANCED_FACE ( 'NONE', ( #216 ), #2342, .F. ) ; +#1768 = EDGE_CURVE ( 'NONE', #2339, #1307, #2362, .T. ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( -41.35587586714707700, 21.55647768741074800, 4.650000000000001200 ) ) ; +#1770 = AXIS2_PLACEMENT_3D ( 'NONE', #2499, #612, #2109 ) ; +#1771 = PRODUCT ( 'Trellais_Clamp_1', 'Trellais_Clamp_1', '', ( #1577 ) ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732305000, -22.83001686389457800, 0.0000000000000000000 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140391900, 0.4596409225296179700, -12.55000000000009800 ) ) ; +#1774 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, 1.850000000000000800 ) ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711752700, -31.75000000000000000, -129.5477436145402200 ) ) ; +#1776 = MANIFOLD_SOLID_BREP ( 'Mirror2', #2420 ) ; +#1777 = VERTEX_POINT ( 'NONE', #859 ) ; +#1778 = EDGE_LOOP ( 'NONE', ( #205 ) ) ; +#1779 = EDGE_LOOP ( 'NONE', ( #860 ) ) ; +#1780 = ADVANCED_FACE ( 'NONE', ( #2421, #1793 ), #646, .F. ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( -5.437453367024188500, -14.23414450188777100, -8.774848305672051700 ) ) ; +#1782 = CARTESIAN_POINT ( 'NONE', ( -36.61751815912123200, -31.71791858412207400, -19.78658659696806800 ) ) ; +#1783 = ORIENTED_EDGE ( 'NONE', *, *, #2647, .F. ) ; +#1784 = EDGE_CURVE ( 'NONE', #2376, #554, #1032, .T. ) ; +#1785 = FACE_OUTER_BOUND ( 'NONE', #1360, .T. ) ; +#1786 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1787 = ORIENTED_EDGE ( 'NONE', *, *, #2543, .F. ) ; +#1788 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #297 ) ; +#1789 = FACE_OUTER_BOUND ( 'NONE', #1676, .T. ) ; +#1790 = EDGE_CURVE ( 'NONE', #721, #191, #2158, .T. ) ; +#1791 = VERTEX_POINT ( 'NONE', #3 ) ; +#1792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 9.725424424388045300E-015 ) ) ; +#1793 = FACE_OUTER_BOUND ( 'NONE', #2036, .T. ) ; +#1794 = VECTOR ( 'NONE', #781, 1000.000000000000000 ) ; +#1795 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ; +#1796 = AXIS2_PLACEMENT_3D ( 'NONE', #451, #1944, #676 ) ; +#1797 = PLANE ( 'NONE', #2623 ) ; +#1798 = DIRECTION ( 'NONE', ( 0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#1799 = VECTOR ( 'NONE', #1027, 1000.000000000000000 ) ; +#1800 = VERTEX_POINT ( 'NONE', #1722 ) ; +#1801 = FACE_OUTER_BOUND ( 'NONE', #1498, .T. ) ; +#1802 = ORIENTED_EDGE ( 'NONE', *, *, #395, .F. ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( -43.56525992479772200, -22.73394224359668700, 7.450000000000002000 ) ) ; +#1804 = ORIENTED_EDGE ( 'NONE', *, *, #236, .F. ) ; +#1805 = VERTEX_POINT ( 'NONE', #2395 ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412300, -31.74999999999999300, -12.54999999999997400 ) ) ; +#1807 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1808 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1809 = EDGE_CURVE ( 'NONE', #2160, #1095, #2610, .T. ) ; +#1810 = PLANE ( 'NONE', #1824 ) ; +#1811 = DIRECTION ( 'NONE', ( 0.4226182617407037700, -0.9063077870366479400, -6.842277657836020900E-049 ) ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( -42.88206337669247900, -24.19906196907662700, -17.35000000000000100 ) ) ; +#1813 = ORIENTED_EDGE ( 'NONE', *, *, #2409, .T. ) ; +#1814 = DIRECTION ( 'NONE', ( -0.2113091308703485000, -0.4531538935183253000, 0.8660254037844387100 ) ) ; +#1815 = DIRECTION ( 'NONE', ( 0.9063077870366511600, -0.4226182617406970500, 5.551115123125782700E-017 ) ) ; +#1816 = VERTEX_POINT ( 'NONE', #654 ) ; +#1817 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1818 = FACE_BOUND ( 'NONE', #166, .T. ) ; +#1819 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .F. ) ; +#1820 = EDGE_CURVE ( 'NONE', #1066, #566, #2551, .T. ) ; +#1821 = FACE_OUTER_BOUND ( 'NONE', #119, .T. ) ; +#1822 = VECTOR ( 'NONE', #1581, 1000.000000000000000 ) ; +#1823 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ; +#1824 = AXIS2_PLACEMENT_3D ( 'NONE', #537, #1170, #2620 ) ; +#1825 = LINE ( 'NONE', #2665, #40 ) ; +#1826 = FACE_BOUND ( 'NONE', #2142, .T. ) ; +#1827 = FACE_OUTER_BOUND ( 'NONE', #1693, .T. ) ; +#1828 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .T. ) ; +#1829 = DIRECTION ( 'NONE', ( 0.4226182617407037700, 0.9063077870366479400, -3.755786496842899800E-015 ) ) ; +#1830 = LINE ( 'NONE', #485, #47 ) ; +#1831 = ORIENTED_EDGE ( 'NONE', *, *, #1349, .T. ) ; +#1832 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1833 = ORIENTED_EDGE ( 'NONE', *, *, #2073, .F. ) ; +#1834 = ORIENTED_EDGE ( 'NONE', *, *, #2525, .T. ) ; +#1835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.5372787775435150500, -0.8434047161365331200 ) ) ; +#1836 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345433200, 22.73394224359669400, -18.15000000000000600 ) ) ; +#1838 = EDGE_CURVE ( 'NONE', #2062, #19, #390, .T. ) ; +#1839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1840 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#1841 = EDGE_CURVE ( 'NONE', #1336, #1872, #455, .T. ) ; +#1842 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720608300, 21.67739658924496400, -14.54999999999998500 ) ) ; +#1844 = AXIS2_PLACEMENT_3D ( 'NONE', #2072, #2290, #1019 ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, 31.65399872081853900, -20.15000000000003100 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, -0.1499999999999938900 ) ) ; +#1847 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .T. ) ; +#1848 = DIRECTION ( 'NONE', ( 0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#1849 = EDGE_LOOP ( 'NONE', ( #1871 ) ) ; +#1850 = DIRECTION ( 'NONE', ( 0.9063077870366511600, -0.4226182617406970500, 5.551115123125782700E-017 ) ) ; +#1851 = VERTEX_POINT ( 'NONE', #2162 ) ; +#1852 = AXIS2_PLACEMENT_3D ( 'NONE', #1878, #1883, #608 ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000000, -22.76974387893084600 ) ) ; +#1854 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1855 = CIRCLE ( 'NONE', #2683, 1.750000000000001100 ) ; +#1856 = EDGE_LOOP ( 'NONE', ( #1105, #18, #2400, #1302 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( -42.89447850551818700, -18.25693368150960100, 0.9131307086377289400 ) ) ; +#1858 = SURFACE_STYLE_FILL_AREA ( #2531 ) ; +#1859 = EDGE_CURVE ( 'NONE', #311, #1496, #2500, .T. ) ; +#1860 = CIRCLE ( 'NONE', #1282, 22.85999999999999900 ) ; +#1861 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#1862 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -25.40000000000000600 ) ) ; +#1863 = FACE_OUTER_BOUND ( 'NONE', #82, .T. ) ; +#1864 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .F. ) ; +#1865 = LINE ( 'NONE', #320, #2429 ) ; +#1866 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .T. ) ; +#1867 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #111, #1618 ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, 21.67739658924489600, 5.450000000000000200 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1870 = DIRECTION ( 'NONE', ( -0.4226182617406971100, -0.9063077870366510500, 0.0000000000000000000 ) ) ; +#1871 = ORIENTED_EDGE ( 'NONE', *, *, #986, .T. ) ; +#1872 = VERTEX_POINT ( 'NONE', #1300 ) ; +#1873 = VERTEX_POINT ( 'NONE', #471 ) ; +#1874 = DIRECTION ( 'NONE', ( -2.031697869779107600E-017, 0.5372787775435203800, -0.8434047161365297900 ) ) ; +#1875 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1876 = VERTEX_POINT ( 'NONE', #2377 ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427476700, -25.39999999999999900, 12.69999999999999900 ) ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( -42.89447850551818700, -18.25693368150960100, 0.9131307086377289400 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905660100, -1.516186576881377400, -12.55000000000009800 ) ) ; +#1880 = EDGE_CURVE ( 'NONE', #191, #190, #831, .T. ) ; +#1881 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#1882 = DIRECTION ( 'NONE', ( -0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1883 = DIRECTION ( 'NONE', ( 0.3659981507706646700, -0.7848855672213963500, -0.5000000000000007800 ) ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156321300, 20.74688556425408600, -20.14999999999998800 ) ) ; +#1885 = ORIENTED_EDGE ( 'NONE', *, *, #1555, .T. ) ; +#1886 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .F. ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, 31.65399872081853200, -20.15000000000003400 ) ) ; +#1888 = FACE_BOUND ( 'NONE', #1638, .T. ) ; +#1889 = VERTEX_POINT ( 'NONE', #1740 ) ; +#1890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5372787775435159400, -0.8434047161365325600 ) ) ; +#1891 = VECTOR ( 'NONE', #1117, 1000.000000000000000 ) ; +#1892 = VECTOR ( 'NONE', #1344, 1000.000000000000000 ) ; +#1893 = EDGE_LOOP ( 'NONE', ( #2387 ) ) ; +#1894 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688672800E-017 ) ) ; +#1895 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037200, -8.326672684688674100E-017 ) ) ; +#1896 = CYLINDRICAL_SURFACE ( 'NONE', #996, 1.750000000000002200 ) ; +#1897 = VECTOR ( 'NONE', #1543, 1000.000000000000100 ) ; +#1898 = LINE ( 'NONE', #1050, #2447 ) ; +#1899 = ORIENTED_EDGE ( 'NONE', *, *, #1409, .T. ) ; +#1900 = EDGE_CURVE ( 'NONE', #2481, #1851, #1522, .T. ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, -20.21227686376500200, 4.650000000000001200 ) ) ; +#1902 = FACE_OUTER_BOUND ( 'NONE', #1761, .T. ) ; +#1903 = EDGE_LOOP ( 'NONE', ( #807 ) ) ; +#1904 = VERTEX_POINT ( 'NONE', #464 ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 6.349999999999994300 ) ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412100, -31.75000000000000000, -18.14999999999999900 ) ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, -31.65399872081853200, -20.15000000000003400 ) ) ; +#1908 = AXIS2_PLACEMENT_3D ( 'NONE', #2107, #843, #2327 ) ; +#1909 = ADVANCED_FACE ( 'NONE', ( #1453, #1309 ), #175, .F. ) ; +#1910 = DIRECTION ( 'NONE', ( 0.2113091308703517700, 0.4531538935183239100, -0.8660254037844386000 ) ) ; +#1911 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1912 = EDGE_CURVE ( 'NONE', #1324, #2376, #1486, .T. ) ; +#1913 = EDGE_CURVE ( 'NONE', #145, #2556, #764, .T. ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, -4.767077332085781600E-016 ) ) ; +#1915 = ORIENTED_EDGE ( 'NONE', *, *, #1409, .F. ) ; +#1916 = ORIENTED_EDGE ( 'NONE', *, *, #991, .F. ) ; +#1917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5372787775435212700, -0.8434047161365291200 ) ) ; +#1918 = FACE_OUTER_BOUND ( 'NONE', #998, .T. ) ; +#1919 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ; +#1920 = CIRCLE ( 'NONE', #1739, 1.750000000000002200 ) ; +#1921 = ADVANCED_FACE ( 'NONE', ( #1821 ), #107, .F. ) ; +#1922 = ORIENTED_EDGE ( 'NONE', *, *, #1765, .T. ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 12.69999999999999900 ) ) ; +#1924 = CYLINDRICAL_SURFACE ( 'NONE', #211, 1.750000000000001100 ) ; +#1925 = FACE_BOUND ( 'NONE', #1893, .T. ) ; +#1926 = EDGE_LOOP ( 'NONE', ( #591 ) ) ; +#1927 = DIRECTION ( 'NONE', ( -0.3659981507706719400, -0.7848855672213971300, -0.4999999999999941700 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, 20.74688556425414600, -3.002671082198546400E-015 ) ) ; +#1929 = LINE ( 'NONE', #355, #809 ) ; +#1930 = EDGE_LOOP ( 'NONE', ( #1319 ) ) ; +#1931 = EDGE_CURVE ( 'NONE', #1876, #1445, #690, .T. ) ; +#1932 = FACE_OUTER_BOUND ( 'NONE', #1098, .T. ) ; +#1933 = ORIENTED_EDGE ( 'NONE', *, *, #1017, .T. ) ; +#1934 = EDGE_LOOP ( 'NONE', ( #1922 ) ) ; +#1935 = EDGE_CURVE ( 'NONE', #2305, #2025, #1247, .T. ) ; +#1936 = ORIENTED_EDGE ( 'NONE', *, *, #1331, .T. ) ; +#1937 = VERTEX_POINT ( 'NONE', #2186 ) ; +#1938 = PLANE ( 'NONE', #1297 ) ; +#1939 = AXIS2_PLACEMENT_3D ( 'NONE', #1928, #874, #2358 ) ; +#1940 = ADVANCED_FACE ( 'NONE', ( #316 ), #1127, .T. ) ; +#1941 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1942 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #466, #1953 ) ; +#1943 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366510500, -1.341352320301034800E-016 ) ) ; +#1944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1945 = DIRECTION ( 'NONE', ( 0.2113091308703492800, 0.4531538935183185800, -0.8660254037844420400 ) ) ; +#1946 = EDGE_CURVE ( 'NONE', #633, #2160, #37, .T. ) ; +#1947 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ; +#1948 = ADVANCED_FACE ( 'NONE', ( #1184 ), #1979, .T. ) ; +#1949 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ; +#1950 = VECTOR ( 'NONE', #1684, 1000.000000000000000 ) ; +#1951 = CARTESIAN_POINT ( 'NONE', ( -43.45835657202621900, -22.96319722344084400, 1.411869291362268400 ) ) ; +#1952 = EDGE_LOOP ( 'NONE', ( #2533, #1672, #600, #1616 ) ) ; +#1953 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1954 = VECTOR ( 'NONE', #2549, 1000.000000000000000 ) ; +#1955 = FACE_OUTER_BOUND ( 'NONE', #1952, .T. ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #2150, .T. ) ; +#1957 = FACE_OUTER_BOUND ( 'NONE', #1779, .T. ) ; +#1958 = ORIENTED_EDGE ( 'NONE', *, *, #1209, .F. ) ; +#1959 = FACE_OUTER_BOUND ( 'NONE', #1433, .T. ) ; +#1960 = VERTEX_POINT ( 'NONE', #915 ) ; +#1961 = ORIENTED_EDGE ( 'NONE', *, *, #681, .T. ) ; +#1962 = FACE_OUTER_BOUND ( 'NONE', #1186, .T. ) ; +#1963 = EDGE_LOOP ( 'NONE', ( #1964 ) ) ; +#1964 = ORIENTED_EDGE ( 'NONE', *, *, #631, .F. ) ; +#1965 = ADVANCED_FACE ( 'NONE', ( #1692 ), #1551, .F. ) ; +#1966 = EDGE_CURVE ( 'NONE', #885, #1889, #557, .T. ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1968 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ; +#1969 = ORIENTED_EDGE ( 'NONE', *, *, #986, .F. ) ; +#1970 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #1613, #333 ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.75000000000000700, 6.349999999999994300 ) ) ; +#1972 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( -43.62164533473870200, 22.61302334176248900, 4.650000000000001200 ) ) ; +#1974 = ADVANCED_FACE ( 'NONE', ( #2263 ), #1142, .T. ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, -21.67739658924489600, -12.55000000000001100 ) ) ; +#1976 = ORIENTED_EDGE ( 'NONE', *, *, #1096, .F. ) ; +#1977 = EDGE_CURVE ( 'NONE', #2174, #2174, #2191, .T. ) ; +#1978 = ORIENTED_EDGE ( 'NONE', *, *, #354, .F. ) ; +#1979 = PLANE ( 'NONE', #449 ) ; +#1980 = CARTESIAN_POINT ( 'NONE', ( -3.533768920313648600, 27.89819190509424700, 2.649999999999999500 ) ) ; +#1981 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1233, #2308, #1443, #158 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 3.315699287014422400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9974755015670601100, 0.9974755015670601100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1982 = EDGE_CURVE ( 'NONE', #1324, #413, #1064, .T. ) ; +#1983 = ORIENTED_EDGE ( 'NONE', *, *, #2687, .T. ) ; +#1984 = LINE ( 'NONE', #1234, #277 ) ; +#1985 = ORIENTED_EDGE ( 'NONE', *, *, #1913, .F. ) ; +#1986 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #1895, #614 ) ; +#1987 = PLANE ( 'NONE', #2098 ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661911200, -31.75000000000000700, 1.850000000000002500 ) ) ; +#1989 = PLANE ( 'NONE', #2312 ) ; +#1990 = VECTOR ( 'NONE', #752, 1000.000000000000000 ) ; +#1991 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ; +#1992 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1993 = CYLINDRICAL_SURFACE ( 'NONE', #61, 1.750000000000002200 ) ; +#1994 = ADVANCED_FACE ( 'NONE', ( #486, #2689 ), #1568, .F. ) ; +#1995 = FILL_AREA_STYLE ('',( #924 ) ) ; +#1996 = VECTOR ( 'NONE', #2250, 1000.000000000000000 ) ; +#1997 = EDGE_LOOP ( 'NONE', ( #2182, #1110, #67, #1391 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412300, 31.75000000000000000, -18.14999999999989900 ) ) ; +#1999 = CYLINDRICAL_SURFACE ( 'NONE', #1178, 1.750000000000001100 ) ; +#2000 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .F. ) ; +#2001 = LINE ( 'NONE', #78, #869 ) ; +#2002 = ORIENTED_EDGE ( 'NONE', *, *, #2568, .T. ) ; +#2003 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .F. ) ; +#2004 = VERTEX_POINT ( 'NONE', #64 ) ; +#2005 = SURFACE_STYLE_FILL_AREA ( #1995 ) ; +#2006 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#2007 = EDGE_CURVE ( 'NONE', #1240, #311, #1625, .T. ) ; +#2008 = EDGE_LOOP ( 'NONE', ( #2188, #2221, #2230, #2270, #2294, #2318, #2352, #2364 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166956900, -15.34999999999999800 ) ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( -41.98268700531133400, 20.21227686376499800, -17.34999999999997700 ) ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#2012 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #1651, #373 ) ; +#2013 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2014 = CARTESIAN_POINT ( 'NONE', ( -40.61629390910085400, -23.14251631472488700, -17.35000000000000100 ) ) ; +#2015 = DIRECTION ( 'NONE', ( 0.4226182617407026600, 0.9063077870366483800, 0.0000000000000000000 ) ) ; +#2016 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711751800, -31.75000000000000000, 6.349999999999994300 ) ) ; +#2017 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037200, 8.326672684688674100E-017 ) ) ; +#2018 = DIRECTION ( 'NONE', ( -0.2113091308703516600, 0.4531538935183234100, -0.8660254037844389300 ) ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752411900, -31.75000000000000000, -0.1499999999999834800 ) ) ; +#2020 = ORIENTED_EDGE ( 'NONE', *, *, #2244, .T. ) ; +#2021 = EDGE_CURVE ( 'NONE', #1607, #1607, #2124, .T. ) ; +#2022 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#2023 = EDGE_LOOP ( 'NONE', ( #2106 ) ) ; +#2024 = LINE ( 'NONE', #1469, #1950 ) ; +#2025 = VERTEX_POINT ( 'NONE', #1803 ) ; +#2026 = VECTOR ( 'NONE', #1295, 1000.000000000000000 ) ; +#2027 = FACE_OUTER_BOUND ( 'NONE', #568, .T. ) ; +#2028 = ORIENTED_EDGE ( 'NONE', *, *, #2131, .F. ) ; +#2029 = AXIS2_PLACEMENT_3D ( 'NONE', #1404, #116, #1620 ) ; +#2030 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, -129.5477436145402200 ) ) ; +#2032 = VECTOR ( 'NONE', #1614, 1000.000000000000100 ) ; +#2033 = EDGE_LOOP ( 'NONE', ( #642 ) ) ; +#2034 = VECTOR ( 'NONE', #1227, 1000.000000000000000 ) ; +#2035 = ORIENTED_EDGE ( 'NONE', *, *, #743, .T. ) ; +#2036 = EDGE_LOOP ( 'NONE', ( #1382, #1783, #736, #434, #2066, #989 ) ) ; +#2037 = DIRECTION ( 'NONE', ( -4.535039887899777400E-015, 9.725424424388032600E-015, -1.000000000000000000 ) ) ; +#2038 = VERTEX_POINT ( 'NONE', #2205 ) ; +#2039 = ORIENTED_EDGE ( 'NONE', *, *, #2454, .T. ) ; +#2040 = PLANE ( 'NONE', #1867 ) ; +#2041 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#2042 = EDGE_CURVE ( 'NONE', #1431, #848, #1554, .T. ) ; +#2043 = DIRECTION ( 'NONE', ( -4.063395739558213900E-017, -0.5372787775435213800, -0.8434047161365291200 ) ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -129.5477436145402200 ) ) ; +#2045 = PLANE ( 'NONE', #2152 ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937037400, -21.67739658924489600, -12.55000000000001100 ) ) ; +#2047 = ORIENTED_EDGE ( 'NONE', *, *, #503, .F. ) ; +#2048 = ORIENTED_EDGE ( 'NONE', *, *, #1612, .T. ) ; +#2049 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037200, 8.326672684688674100E-017 ) ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, 31.75000000000000700, -19.04999999999999700 ) ) ; +#2051 = ORIENTED_EDGE ( 'NONE', *, *, #1508, .T. ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427368400, 25.39999999999999900, -25.39999999999999900 ) ) ; +#2053 = VECTOR ( 'NONE', #2659, 1000.000000000000100 ) ; +#2054 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .T. ) ; +#2055 = EDGE_CURVE ( 'NONE', #566, #853, #2582, .T. ) ; +#2056 = VECTOR ( 'NONE', #1808, 1000.000000000000000 ) ; +#2057 = EDGE_LOOP ( 'NONE', ( #1645 ) ) ; +#2058 = AXIS2_PLACEMENT_3D ( 'NONE', #2508, #182, #1686 ) ; +#2059 = PLANE ( 'NONE', #638 ) ; +#2060 = FACE_OUTER_BOUND ( 'NONE', #701, .T. ) ; +#2061 = VECTOR ( 'NONE', #2433, 1000.000000000000100 ) ; +#2062 = VERTEX_POINT ( 'NONE', #1369 ) ; +#2063 = PLANE ( 'NONE', #1413 ) ; +#2064 = FACE_OUTER_BOUND ( 'NONE', #1379, .T. ) ; +#2065 = ORIENTED_EDGE ( 'NONE', *, *, #408, .F. ) ; +#2066 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ; +#2067 = PLANE ( 'NONE', #83 ) ; +#2068 = EDGE_LOOP ( 'NONE', ( #48, #2402, #1531, #330, #293 ) ) ; +#2069 = VECTOR ( 'NONE', #1945, 1000.000000000000100 ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, 0.0000000000000000000 ) ) ; +#2071 = DIRECTION ( 'NONE', ( -6.124977852475733400E-017, -8.366254228761938800E-033, 1.000000000000000000 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999000, -25.41000000000001100 ) ) ; +#2073 = EDGE_CURVE ( 'NONE', #2390, #1585, #2639, .T. ) ; +#2074 = EDGE_LOOP ( 'NONE', ( #789, #1367, #2123, #1516, #2597, #2369 ) ) ; +#2075 = DIRECTION ( 'NONE', ( -1.000000000000000000, 8.881784197001254300E-016, 0.0000000000000000000 ) ) ; +#2076 = EDGE_CURVE ( 'NONE', #1494, #2574, #352, .T. ) ; +#2077 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#2078 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156324100, 20.74688556425400400, -14.54999999999996000 ) ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, -12.69999999999999900 ) ) ; +#2080 = DIRECTION ( 'NONE', ( 0.2113091308703513000, 0.4531538935183316900, 0.8660254037844347100 ) ) ; +#2081 = ORIENTED_EDGE ( 'NONE', *, *, #2042, .F. ) ; +#2082 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711753600, -31.75000000000000000, 10.06974387893084400 ) ) ; +#2083 = ORIENTED_EDGE ( 'NONE', *, *, #1859, .F. ) ; +#2084 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2190 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #2586, #1340, #57 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#2085 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909000, -31.74999999999999300, 6.718991938161258800 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, 1.850000000000000800 ) ) ; +#2087 = ORIENTED_EDGE ( 'NONE', *, *, #628, .T. ) ; +#2088 = VECTOR ( 'NONE', #1512, 1000.000000000000100 ) ; +#2089 = EDGE_CURVE ( 'NONE', #2376, #2355, #925, .T. ) ; +#2090 = EDGE_CURVE ( 'NONE', #2339, #1750, #2524, .T. ) ; +#2091 = VECTOR ( 'NONE', #1266, 1000.000000000000000 ) ; +#2092 = VERTEX_POINT ( 'NONE', #2243 ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, -31.75000000000000700, 1.850000000000002500 ) ) ; +#2094 = LINE ( 'NONE', #2448, #967 ) ; +#2095 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .F. ) ; +#2096 = LINE ( 'NONE', #804, #1527 ) ; +#2097 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ; +#2098 = AXIS2_PLACEMENT_3D ( 'NONE', #2209, #62, #1571 ) ; +#2099 = PLANE ( 'NONE', #1484 ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -19.04999999999999700 ) ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( -3.171683899432566500, 15.29069015623953100, -8.774848305672051700 ) ) ; +#2102 = CIRCLE ( 'NONE', #1166, 1.749999999999998700 ) ; +#2103 = ORIENTED_EDGE ( 'NONE', *, *, #1746, .F. ) ; +#2104 = VERTEX_POINT ( 'NONE', #269 ) ; +#2105 = VERTEX_POINT ( 'NONE', #94 ) ; +#2106 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ; +#2107 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, -3.002671082198546400E-015 ) ) ; +#2108 = DIRECTION ( 'NONE', ( -0.4226182617407026600, 0.9063077870366483800, 0.0000000000000000000 ) ) ; +#2109 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, 1.850000000000000800 ) ) ; +#2111 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366510500, 3.219245568722476800E-015 ) ) ; +#2112 = EDGE_CURVE ( 'NONE', #1045, #1045, #1419, .T. ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( -7.325725897450663400, -24.19906196907659200, 2.649999999999999500 ) ) ; +#2114 = PLANE ( 'NONE', #1908 ) ; +#2115 = AXIS2_PLACEMENT_3D ( 'NONE', #1608, #2037, #761 ) ; +#2116 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 6.349999999999994300 ) ) ; +#2117 = DIRECTION ( 'NONE', ( -0.2113091308703462800, 0.4531538935183206400, 0.8660254037844418200 ) ) ; +#2118 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .T. ) ; +#2119 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .F. ) ; +#2120 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#2121 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#2122 = VECTOR ( 'NONE', #579, 1000.000000000000100 ) ; +#2123 = ORIENTED_EDGE ( 'NONE', *, *, #1718, .T. ) ; +#2124 = CIRCLE ( 'NONE', #1299, 1.750000000000001100 ) ; +#2125 = ORIENTED_EDGE ( 'NONE', *, *, #783, .T. ) ; +#2126 = EDGE_CURVE ( 'NONE', #465, #465, #1920, .T. ) ; +#2127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -6.201209522363663400E-049 ) ) ; +#2128 = VECTOR ( 'NONE', #2111, 1000.000000000000100 ) ; +#2129 = LINE ( 'NONE', #2426, #1001 ) ; +#2130 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .T. ) ; +#2131 = EDGE_CURVE ( 'NONE', #327, #840, #212, .T. ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937053400, 21.67739658924493500, -18.15000000000000600 ) ) ; +#2133 = VECTOR ( 'NONE', #767, 1000.000000000000000 ) ; +#2134 = ORIENTED_EDGE ( 'NONE', *, *, #477, .F. ) ; +#2135 = CYLINDRICAL_SURFACE ( 'NONE', #684, 1.749999999999997800 ) ; +#2136 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( -5.724587470723463400E-014, -20.32000000000000400, -25.41000000000001100 ) ) ; +#2138 = AXIS2_PLACEMENT_3D ( 'NONE', #1425, #146, #1658 ) ; +#2139 = VERTEX_POINT ( 'NONE', #331 ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #35, .F. ) ; +#2141 = FILL_AREA_STYLE_COLOUR ( '', #1220 ) ; +#2142 = EDGE_LOOP ( 'NONE', ( #936, #918, #132, #152 ) ) ; +#2143 = ADVANCED_FACE ( 'NONE', ( #283, #1347 ), #1174, .F. ) ; +#2144 = LINE ( 'NONE', #440, #943 ) ; +#2145 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, -4.535039887899872900E-015 ) ) ; +#2146 = DIRECTION ( 'NONE', ( -0.4226182617407037700, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2147 = DIRECTION ( 'NONE', ( -0.2113091308703462800, 0.4531538935183206400, 0.8660254037844418200 ) ) ; +#2148 = DIRECTION ( 'NONE', ( 0.4226182617407036000, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( -39.37596295652743800, -31.71791858412207400, -19.78658659696806800 ) ) ; +#2150 = EDGE_CURVE ( 'NONE', #2621, #2621, #1279, .T. ) ; +#2151 = ADVANCED_FACE ( 'NONE', ( #2419 ), #1183, .T. ) ; +#2152 = AXIS2_PLACEMENT_3D ( 'NONE', #988, #2460, #1198 ) ; +#2153 = ORIENTED_EDGE ( 'NONE', *, *, #901, .F. ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, 31.75000000000000700, -19.41899193816127000 ) ) ; +#2155 = ORIENTED_EDGE ( 'NONE', *, *, #802, .T. ) ; +#2156 = CIRCLE ( 'NONE', #777, 20.32000000000000000 ) ; +#2157 = ORIENTED_EDGE ( 'NONE', *, *, #1329, .F. ) ; +#2158 = LINE ( 'NONE', #2542, #2088 ) ; +#2159 = VECTOR ( 'NONE', #2120, 1000.000000000000100 ) ; +#2160 = VERTEX_POINT ( 'NONE', #2631 ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905660100, 1.516186576881377400, -12.55000000000009800 ) ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( -44.24845647290295900, -21.26882251811674300, 4.650000000000001200 ) ) ; +#2163 = VECTOR ( 'NONE', #1600, 1000.000000000000000 ) ; +#2164 = ADVANCED_FACE ( 'NONE', ( #727 ), #556, .T. ) ; +#2165 = ORIENTED_EDGE ( 'NONE', *, *, #830, .F. ) ; +#2166 = EDGE_CURVE ( 'NONE', #2104, #2104, #1855, .T. ) ; +#2167 = LINE ( 'NONE', #2070, #532 ) ; +#2168 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ; +#2169 = LINE ( 'NONE', #656, #437 ) ; +#2170 = VECTOR ( 'NONE', #1500, 1000.000000000000100 ) ; +#2171 = VERTEX_POINT ( 'NONE', #2046 ) ; +#2172 = AXIS2_PLACEMENT_3D ( 'NONE', #2176, #2581, #2211 ) ; +#2173 = EDGE_LOOP ( 'NONE', ( #63 ) ) ; +#2174 = VERTEX_POINT ( 'NONE', #1131 ) ; +#2175 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, 4.650000000000001200 ) ) ; +#2177 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #2041, #773 ) ; +#2178 = DIRECTION ( 'NONE', ( -0.2113091308703485000, 0.4531538935183253000, 0.8660254037844387100 ) ) ; +#2179 = ADVANCED_FACE ( 'NONE', ( #659, #1789 ), #784, .F. ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( -43.62164533473870200, 22.61302334176248900, -17.35000000000000100 ) ) ; +#2181 = EDGE_CURVE ( 'NONE', #587, #673, #72, .T. ) ; +#2182 = ORIENTED_EDGE ( 'NONE', *, *, #610, .F. ) ; +#2183 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #379, #1874 ) ; +#2184 = VERTEX_POINT ( 'NONE', #1205 ) ; +#2185 = CYLINDRICAL_SURFACE ( 'NONE', #857, 1.750000000000001100 ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, -31.75000000000000700, 6.349999999999994300 ) ) ; +#2187 = ADVANCED_FACE ( 'NONE', ( #1721, #2297, #140 ), #1004, .T. ) ; +#2188 = ORIENTED_EDGE ( 'NONE', *, *, #2525, .F. ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( -3.533768920313650000, 27.89819190509425100, -15.34999999999999800 ) ) ; +#2190 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #2586, 'distance_accuracy_value', 'NONE'); +#2191 = CIRCLE ( 'NONE', #884, 1.750000000000001100 ) ; +#2192 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .F. ) ; +#2193 = VECTOR ( 'NONE', #1235, 1000.000000000000100 ) ; +#2194 = VECTOR ( 'NONE', #2313, 1000.000000000000000 ) ; +#2196 = LINE ( 'NONE', #946, #2642 ) ; +#2195 = AXIS2_PLACEMENT_3D ( 'NONE', #2513, #1474, #193 ) ; +#2197 = EDGE_LOOP ( 'NONE', ( #702, #2321, #1215, #203 ) ) ; +#2198 = PLANE ( 'NONE', #2702 ) ; +#2199 = CIRCLE ( 'NONE', #469, 20.32000000000000000 ) ; +#2200 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ; +#2201 = CYLINDRICAL_SURFACE ( 'NONE', #542, 1.750000000000001100 ) ; +#2202 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ; +#2203 = DIRECTION ( 'NONE', ( -2.031697869779107600E-017, -0.5372787775435203800, -0.8434047161365297900 ) ) ; +#2204 = EDGE_CURVE ( 'NONE', #1157, #2331, #1153, .T. ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( -43.62164533473870200, -22.61302334176248900, 4.650000000000001200 ) ) ; +#2206 = EDGE_LOOP ( 'NONE', ( #1544, #1125, #852, #370, #1548 ) ) ; +#2207 = ADVANCED_FACE ( 'NONE', ( #7 ), #521, .T. ) ; +#2208 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, 5.450000000000000200 ) ) ; +#2210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.403898548535812800E-015 ) ) ; +#2211 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2212 = DIRECTION ( 'NONE', ( -1.587263960764953200E-015, -3.403898548535812800E-015, -1.000000000000000000 ) ) ; +#2213 = SURFACE_STYLE_USAGE ( .BOTH. , #720 ) ; +#2214 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, 29.11974387893085500, -25.40000000000000200 ) ) ; +#2215 = PLANE ( 'NONE', #2380 ) ; +#2216 = EDGE_CURVE ( 'NONE', #992, #109, #1093, .T. ) ; +#2217 = VERTEX_POINT ( 'NONE', #1652 ) ; +#2218 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, -5.551115123125781500E-017 ) ) ; +#2219 = ADVANCED_FACE ( 'NONE', ( #1663, #2666 ), #2657, .F. ) ; +#2220 = EDGE_CURVE ( 'NONE', #554, #2504, #2156, .T. ) ; +#2221 = ORIENTED_EDGE ( 'NONE', *, *, #758, .T. ) ; +#2222 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, -0.0000000000000000000 ) ) ; +#2223 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999700, -129.5477436145402200 ) ) ; +#2225 = CARTESIAN_POINT ( 'NONE', ( 5.258561630003524300E-013, 31.75000000000000000, -14.55000000000027100 ) ) ; +#2226 = LINE ( 'NONE', #819, #2607 ) ; +#2227 = ORIENTED_EDGE ( 'NONE', *, *, #1081, .T. ) ; +#2228 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2229 = CIRCLE ( 'NONE', #230, 1.750000000000002400 ) ; +#2230 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ; +#2231 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2232 = VECTOR ( 'NONE', #2236, 1000.000000000000000 ) ; +#2233 = VERTEX_POINT ( 'NONE', #153 ) ; +#2234 = CIRCLE ( 'NONE', #194, 19.04999999999999700 ) ; +#2235 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .T. ) ; +#2236 = DIRECTION ( 'NONE', ( -6.124977852475733400E-017, -8.366254228761938800E-033, 1.000000000000000000 ) ) ; +#2237 = ORIENTED_EDGE ( 'NONE', *, *, #1432, .F. ) ; +#2238 = AXIS2_PLACEMENT_3D ( 'NONE', #2564, #28, #1537 ) ; +#2239 = EDGE_LOOP ( 'NONE', ( #1119 ) ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 3.251472606905680100, -1.516186576881335000, -0.1499999999999938900 ) ) ; +#2241 = DIRECTION ( 'NONE', ( 0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2242 = VERTEX_POINT ( 'NONE', #1973 ) ; +#2243 = CARTESIAN_POINT ( 'NONE', ( -36.64732448088788200, -31.65399872081854600, 7.450000000000002000 ) ) ; +#2244 = EDGE_CURVE ( 'NONE', #798, #2139, #590, .T. ) ; +#2245 = EDGE_LOOP ( 'NONE', ( #15 ) ) ; +#2246 = EDGE_CURVE ( 'NONE', #53, #524, #2226, .T. ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( -42.88206337669247900, 24.19906196907662700, -17.35000000000000100 ) ) ; +#2248 = ORIENTED_EDGE ( 'NONE', *, *, #978, .T. ) ; +#2249 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#2250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2251 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2252 = DIRECTION ( 'NONE', ( 0.4226182617407035500, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, 31.75000000000000700, 1.850000000000002500 ) ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, 31.65399872081854600, 7.450000000000002000 ) ) ; +#2255 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .T. ) ; +#2256 = EDGE_CURVE ( 'NONE', #2651, #1889, #1981, .T. ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( -45.21856676291189100, -13.27291032965379400, -4.088130708637633500 ) ) ; +#2258 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .T. ) ; +#2259 = CIRCLE ( 'NONE', #272, 1.750000000000002400 ) ; +#2260 = AXIS2_PLACEMENT_3D ( 'NONE', #560, #2049, #786 ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 12.69999999999999900 ) ) ; +#2262 = VERTEX_POINT ( 'NONE', #2093 ) ; +#2263 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ; +#2264 = VECTOR ( 'NONE', #958, 1000.000000000000000 ) ; +#2265 = EDGE_LOOP ( 'NONE', ( #1661, #585, #1149, #1133 ) ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( -3.171683899432566500, -15.29069015623953100, -8.774848305672051700 ) ) ; +#2267 = LINE ( 'NONE', #1035, #2193 ) ; +#2268 = FACE_OUTER_BOUND ( 'NONE', #810, .T. ) ; +#2269 = VECTOR ( 'NONE', #2408, 1000.000000000000000 ) ; +#2270 = ORIENTED_EDGE ( 'NONE', *, *, #2617, .F. ) ; +#2271 = FACE_OUTER_BOUND ( 'NONE', #2558, .T. ) ; +#2272 = LINE ( 'NONE', #511, #1073 ) ; +#2273 = ORIENTED_EDGE ( 'NONE', *, *, #2220, .T. ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166956900, -15.34999999999999800 ) ) ; +#2275 = ORIENTED_EDGE ( 'NONE', *, *, #1576, .F. ) ; +#2276 = EDGE_CURVE ( 'NONE', #1212, #633, #450, .T. ) ; +#2277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2278 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .T. ) ; +#2279 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2280 = EDGE_CURVE ( 'NONE', #1533, #1533, #1518, .T. ) ; +#2281 = DIRECTION ( 'NONE', ( 0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2282 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2283 = DIRECTION ( 'NONE', ( -6.124977852475756900E-017, -8.366254228761971700E-033, -1.000000000000000000 ) ) ; +#2284 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2285 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2286 = ORIENTED_EDGE ( 'NONE', *, *, #2600, .T. ) ; +#2287 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#2288 = AXIS2_PLACEMENT_3D ( 'NONE', #2315, #1894, #613 ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( -44.24845647290295900, -21.26882251811673900, -17.34999999999997700 ) ) ; +#2290 = DIRECTION ( 'NONE', ( 0.9063077870366510500, -0.4226182617406971100, 0.0000000000000000000 ) ) ; +#2291 = EDGE_LOOP ( 'NONE', ( #73 ) ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.75000000000000700, -19.41899193816127300 ) ) ; +#2293 = CYLINDRICAL_SURFACE ( 'NONE', #950, 19.04999999999999700 ) ; +#2294 = ORIENTED_EDGE ( 'NONE', *, *, #2568, .F. ) ; +#2295 = EDGE_CURVE ( 'NONE', #775, #2481, #387, .T. ) ; +#2296 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406970500, -5.551115123125781500E-017 ) ) ; +#2297 = FACE_BOUND ( 'NONE', #2291, .T. ) ; +#2298 = ORIENTED_EDGE ( 'NONE', *, *, #2280, .F. ) ; +#2299 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397161600, -19.69033990990226400, -14.54999999999996000 ) ) ; +#2300 = EDGE_LOOP ( 'NONE', ( #448 ) ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427476700, -25.39999999999999900, 12.69999999999999900 ) ) ; +#2302 = LINE ( 'NONE', #1371, #2232 ) ; +#2303 = ORIENTED_EDGE ( 'NONE', *, *, #2618, .F. ) ; +#2304 = CIRCLE ( 'NONE', #481, 1.750000000000001100 ) ; +#2305 = VERTEX_POINT ( 'NONE', #611 ) ; +#2306 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831792100, 20.21227686376498100, -15.35000000000001900 ) ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.74999999999999300, 6.718991938161258800 ) ) ; +#2309 = VERTEX_POINT ( 'NONE', #36 ) ; +#2310 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366510500, -1.341352320301034800E-016 ) ) ; +#2311 = EDGE_CURVE ( 'NONE', #1102, #1569, #2548, .T. ) ; +#2312 = AXIS2_PLACEMENT_3D ( 'NONE', #1774, #1573, #1563 ) ; +#2313 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#2314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.917627327316413300E-015 ) ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( -5.811605263460792000, -2.709996040525698600, -7.150615998128679300E-016 ) ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( -8.225102268831786700, -20.21227686376496600, 2.650000000000001200 ) ) ; +#2317 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ; +#2318 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .T. ) ; +#2319 = PLANE ( 'NONE', #2530 ) ; +#2320 = FACE_OUTER_BOUND ( 'NONE', #922, .T. ) ; +#2321 = ORIENTED_EDGE ( 'NONE', *, *, #844, .F. ) ; +#2322 = VECTOR ( 'NONE', #488, 1000.000000000000000 ) ; +#2323 = EDGE_CURVE ( 'NONE', #1076, #1528, #1451, .T. ) ; +#2324 = DIRECTION ( 'NONE', ( -0.4226182617407039900, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2325 = CIRCLE ( 'NONE', #27, 1.750000000000001100 ) ; +#2326 = ORIENTED_EDGE ( 'NONE', *, *, #1931, .T. ) ; +#2327 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2328 = LINE ( 'NONE', #2078, #834 ) ; +#2329 = LINE ( 'NONE', #2356, #695 ) ; +#2330 = FACE_OUTER_BOUND ( 'NONE', #2197, .T. ) ; +#2331 = VERTEX_POINT ( 'NONE', #2684 ) ; +#2332 = AXIS2_PLACEMENT_3D ( 'NONE', #525, #2017, #749 ) ; +#2333 = LINE ( 'NONE', #501, #700 ) ; +#2334 = ORIENTED_EDGE ( 'NONE', *, *, #558, .T. ) ; +#2335 = ORIENTED_EDGE ( 'NONE', *, *, #2042, .T. ) ; +#2336 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .F. ) ; +#2337 = ORIENTED_EDGE ( 'NONE', *, *, #1517, .F. ) ; +#2338 = DIRECTION ( 'NONE', ( 0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2339 = VERTEX_POINT ( 'NONE', #1887 ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, 4.650000000000001200 ) ) ; +#2341 = AXIS2_PLACEMENT_3D ( 'NONE', #854, #2347, #1077 ) ; +#2342 = PLANE ( 'NONE', #1084 ) ; +#2343 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#2344 = EDGE_CURVE ( 'NONE', #359, #1157, #2024, .T. ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732304100, -22.83001686389457800, -12.69999999999999900 ) ) ; +#2346 = ADVANCED_FACE ( 'NONE', ( #828, #888 ), #2114, .T. ) ; +#2347 = DIRECTION ( 'NONE', ( 0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2348 = AXIS2_PLACEMENT_3D ( 'NONE', #1905, #622, #407 ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( 2.827132481838947800E-015, 31.65399872081853200, -20.15000000000007700 ) ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( -5.437453367024188500, -14.23414450188777100, -8.774848305672051700 ) ) ; +#2351 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ; +#2352 = ORIENTED_EDGE ( 'NONE', *, *, #2089, .F. ) ; +#2353 = PLANE ( 'NONE', #1011 ) ; +#2354 = FACE_OUTER_BOUND ( 'NONE', #519, .T. ) ; +#2355 = VERTEX_POINT ( 'NONE', #1259 ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( -44.49183967156318400, 20.74688556425414600, 1.850000000000000800 ) ) ; +#2357 = VECTOR ( 'NONE', #1418, 1000.000000000000000 ) ; +#2358 = DIRECTION ( 'NONE', ( -0.4226182617406970500, -0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2359 = ADVANCED_FACE ( 'NONE', ( #240 ), #618, .T. ) ; +#2360 = ORIENTED_EDGE ( 'NONE', *, *, #551, .F. ) ; +#2361 = EDGE_CURVE ( 'NONE', #1121, #1076, #1383, .T. ) ; +#2362 = LINE ( 'NONE', #2349, #143 ) ; +#2363 = FACE_OUTER_BOUND ( 'NONE', #1226, .T. ) ; +#2364 = ORIENTED_EDGE ( 'NONE', *, *, #1912, .F. ) ; +#2365 = EDGE_CURVE ( 'NONE', #602, #1557, #2497, .T. ) ; +#2366 = LINE ( 'NONE', #2306, #1727 ) ; +#2367 = ORIENTED_EDGE ( 'NONE', *, *, #2216, .T. ) ; +#2368 = LINE ( 'NONE', #2261, #150 ) ; +#2369 = ORIENTED_EDGE ( 'NONE', *, *, #2454, .F. ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( -4.141578998974845900, 17.37063690937623800, 10.09984830567204600 ) ) ; +#2371 = AXIS2_PLACEMENT_3D ( 'NONE', #2383, #1112, #679 ) ; +#2372 = VERTEX_POINT ( 'NONE', #2519 ) ; +#2373 = ORIENTED_EDGE ( 'NONE', *, *, #881, .T. ) ; +#2374 = VERTEX_POINT ( 'NONE', #909 ) ; +#2375 = ADVANCED_FACE ( 'NONE', ( #173 ), #406, .T. ) ; +#2376 = VERTEX_POINT ( 'NONE', #1710 ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720608300, -21.67739658924496400, -14.54999999999998500 ) ) ; +#2378 = EDGE_CURVE ( 'NONE', #977, #977, #2386, .T. ) ; +#2379 = EDGE_CURVE ( 'NONE', #633, #1066, #1304, .T. ) ; +#2380 = AXIS2_PLACEMENT_3D ( 'NONE', #1781, #945, #2425 ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921289200, 31.75000000000000700, -19.04999999999999700 ) ) ; +#2382 = ORIENTED_EDGE ( 'NONE', *, *, #1784, .F. ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, 19.97287935166965100, 4.650000000000001200 ) ) ; +#2384 = ADVANCED_FACE ( 'NONE', ( #1888, #1818, #103 ), #1270, .F. ) ; +#2385 = ORIENTED_EDGE ( 'NONE', *, *, #1477, .T. ) ; +#2386 = CIRCLE ( 'NONE', #2341, 1.750000000000001100 ) ; +#2387 = ORIENTED_EDGE ( 'NONE', *, *, #2021, .F. ) ; +#2388 = VECTOR ( 'NONE', #896, 1000.000000000000100 ) ; +#2389 = FACE_OUTER_BOUND ( 'NONE', #1303, .T. ) ; +#2390 = VERTEX_POINT ( 'NONE', #1923 ) ; +#2391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2392 = FACE_OUTER_BOUND ( 'NONE', #105, .T. ) ; +#2393 = FACE_OUTER_BOUND ( 'NONE', #1293, .T. ) ; +#2394 = EDGE_CURVE ( 'NONE', #53, #1514, #1244, .T. ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( -17.12838572586336700, -21.55891797898369300, 2.649999999999999500 ) ) ; +#2396 = VECTOR ( 'NONE', #2404, 1000.000000000000000 ) ; +#2397 = ORIENTED_EDGE ( 'NONE', *, *, #189, .F. ) ; +#2398 = EDGE_LOOP ( 'NONE', ( #1502 ) ) ; +#2399 = VECTOR ( 'NONE', #1521, 1000.000000000000000 ) ; +#2400 = ORIENTED_EDGE ( 'NONE', *, *, #1329, .T. ) ; +#2401 = ADVANCED_FACE ( 'NONE', ( #1748, #32 ), #871, .T. ) ; +#2402 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .F. ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397161600, 19.69033990990226400, -14.54999999999996000 ) ) ; +#2404 = DIRECTION ( 'NONE', ( 0.2113091308703513000, -0.4531538935183316900, 0.8660254037844347100 ) ) ; +#2405 = DIRECTION ( 'NONE', ( -6.124977852475756900E-017, -8.366254228761971700E-033, -1.000000000000000000 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( -17.12838572586336700, 21.55891797898369300, 2.649999999999999500 ) ) ; +#2407 = DIRECTION ( 'NONE', ( -0.2113091308703516600, -0.4531538935183234100, -0.8660254037844389300 ) ) ; +#2408 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2409 = EDGE_CURVE ( 'NONE', #402, #402, #2259, .T. ) ; +#2410 = ADVANCED_FACE ( 'NONE', ( #2320, #553 ), #2185, .F. ) ; +#2411 = EDGE_CURVE ( 'NONE', #2025, #900, #1120, .T. ) ; +#2412 = ORIENTED_EDGE ( 'NONE', *, *, #2618, .T. ) ; +#2413 = AXIS2_PLACEMENT_3D ( 'NONE', #1703, #418, #1911 ) ; +#2414 = CARTESIAN_POINT ( 'NONE', ( -40.61629390910085400, -23.14251631472488700, 4.650000000000001200 ) ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, 31.75000000000000700, -19.04999999999999700 ) ) ; +#2416 = LINE ( 'NONE', #1051, #2468 ) ; +#2417 = EDGE_LOOP ( 'NONE', ( #1285, #271, #148, #1626, #533, #332 ) ) ; +#2418 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2419 = FACE_OUTER_BOUND ( 'NONE', #1654, .T. ) ; +#2420 = CLOSED_SHELL ( 'NONE', ( #1269, #1306, #680, #23, #2596, #2207, #1559, #2384, #2187, #234, #248, #1921, #2578, #1940, #441, #1143, #1298, #2696, #30, #1715, #2410, #1728, #303, #468, #206, #919, #227, #2346, #1780, #694, #1509, #1339, #2375, #1909, #1965, #880, #2143, #1575, #1741, #645, #1325, #1287, #938, #2566, #674, #2179, #1767, #1089, #510, #1532, #430, #724, #2401, #1994, #850, #907, #2537, #498, #2547, #1079, #1129, #1948, #2521, #1541, #2359, #279, #452, #867, #2219, #51, #2151, #2422, #2555, #1489, #264, #1107, #655, #1515, #1115, #2705, #713, #8, #1361, #1974, #889, #476, #60, #2164, #1709, #1749 ) ) ; +#2421 = FACE_BOUND ( 'NONE', #1545, .T. ) ; +#2422 = ADVANCED_FACE ( 'NONE', ( #1182 ), #2353, .T. ) ; +#2423 = FACE_BOUND ( 'NONE', #2300, .T. ) ; +#2424 = ORIENTED_EDGE ( 'NONE', *, *, #1060, .T. ) ; +#2425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5372787775435218200, -0.8434047161365287900 ) ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674640500, -22.85997687295769200, 12.69999999999999900 ) ) ; +#2427 = LINE ( 'NONE', #1857, #220 ) ; +#2428 = EDGE_LOOP ( 'NONE', ( #837, #301, #2168, #1057 ) ) ; +#2429 = VECTOR ( 'NONE', #1814, 1000.000000000000100 ) ; +#2430 = EDGE_CURVE ( 'NONE', #2217, #1240, #1061, .T. ) ; +#2431 = VERTEX_POINT ( 'NONE', #250 ) ; +#2432 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 2.891671490101913400E-049 ) ) ; +#2433 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#2434 = DIRECTION ( 'NONE', ( 0.2113091308703517700, -0.4531538935183239100, -0.8660254037844386000 ) ) ; +#2435 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2436 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( -36.60255834921288500, -31.75000000000000700, -14.55000000000010200 ) ) ; +#2438 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, -31.75000000000000700, -14.55000000000009300 ) ) ; +#2440 = EDGE_CURVE ( 'NONE', #2372, #192, #480, .T. ) ; +#2441 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #172, #2146 ) ; +#2442 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2443 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, -0.0000000000000000000 ) ) ; +#2444 = VECTOR ( 'NONE', #1054, 1000.000000000000000 ) ; +#2445 = FACE_OUTER_BOUND ( 'NONE', #2595, .T. ) ; +#2446 = LINE ( 'NONE', #1323, #1897 ) ; +#2447 = VECTOR ( 'NONE', #169, 1000.000000000000000 ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -25.39999999999999900 ) ) ; +#2449 = FACE_BOUND ( 'NONE', #2173, .T. ) ; +#2450 = CARTESIAN_POINT ( 'NONE', ( -7.325725897450671400, 24.19906196907660200, -15.34999999999999800 ) ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#2452 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ; +#2453 = EDGE_LOOP ( 'NONE', ( #1222 ) ) ; +#2454 = EDGE_CURVE ( 'NONE', #497, #848, #2688, .T. ) ; +#2455 = ORIENTED_EDGE ( 'NONE', *, *, #901, .T. ) ; +#2456 = VERTEX_POINT ( 'NONE', #2289 ) ; +#2457 = PLANE ( 'NONE', #707 ) ; +#2458 = AXIS2_PLACEMENT_3D ( 'NONE', #817, #1673, #1792 ) ; +#2459 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2460 = DIRECTION ( 'NONE', ( 0.3659981507706719400, -0.7848855672213971300, 0.4999999999999941700 ) ) ; +#2461 = DIRECTION ( 'NONE', ( -2.031697869779130400E-017, -0.5372787775435288200, -0.8434047161365243500 ) ) ; +#2462 = AXIS2_PLACEMENT_3D ( 'NONE', #2340, #2699, #1482 ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661909700, 31.75000000000000700, 6.349999999999994300 ) ) ; +#2464 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1438, #1853, #1228, #2664 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2465 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#2466 = EDGE_LOOP ( 'NONE', ( #2307, #1195, #181, #531, #1460 ) ) ; +#2467 = EDGE_CURVE ( 'NONE', #2139, #1427, #2577, .T. ) ; +#2468 = VECTOR ( 'NONE', #2509, 1000.000000000000000 ) ; +#2469 = AXIS2_PLACEMENT_3D ( 'NONE', #2572, #1327, #45 ) ; +#2470 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2471 = DIRECTION ( 'NONE', ( -2.031697869779098000E-017, 0.5372787775435272600, -0.8434047161365253500 ) ) ; +#2472 = VECTOR ( 'NONE', #1380, 1000.000000000000100 ) ; +#2473 = VERTEX_POINT ( 'NONE', #2482 ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, 29.11974387893085500, 12.69999999999999200 ) ) ; +#2475 = LINE ( 'NONE', #1262, #862 ) ; +#2476 = FACE_OUTER_BOUND ( 'NONE', #2265, .T. ) ; +#2477 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2478 = CYLINDRICAL_SURFACE ( 'NONE', #1317, 22.85999999999999900 ) ; +#2479 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .T. ) ; +#2480 = LINE ( 'NONE', #1583, #1359 ) ; +#2481 = VERTEX_POINT ( 'NONE', #1216 ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, -31.75000000000000700, 6.349999999999994300 ) ) ; +#2483 = PLANE ( 'NONE', #2138 ) ; +#2484 = ORIENTED_EDGE ( 'NONE', *, *, #1555, .F. ) ; +#2485 = ORIENTED_EDGE ( 'NONE', *, *, #672, .F. ) ; +#2486 = VERTEX_POINT ( 'NONE', #1745 ) ; +#2487 = EDGE_CURVE ( 'NONE', #19, #2390, #1550, .T. ) ; +#2488 = ORIENTED_EDGE ( 'NONE', *, *, #1432, .T. ) ; +#2489 = EDGE_CURVE ( 'NONE', #587, #2004, #1483, .T. ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548130500, -29.11974387893084400, 12.69999999999999200 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( -39.40576927829410200, -31.65399872081854600, 7.450000000000002000 ) ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345413600, -22.73394224359666200, -0.1499999999999938900 ) ) ; +#2493 = STYLED_ITEM ( 'NONE', ( #776 ), #2635 ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( -5.959332801240165600, 21.26882251811672500, 2.650000000000001200 ) ) ; +#2495 = EDGE_CURVE ( 'NONE', #1904, #2355, #2464, .T. ) ; +#2496 = EDGE_CURVE ( 'NONE', #900, #1396, #197, .T. ) ; +#2497 = LINE ( 'NONE', #412, #760 ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( -8.731436723960261000, -21.29811460688040700, -13.27484830567190100 ) ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, -4.767077332085781600E-016 ) ) ; +#2500 = LINE ( 'NONE', #1735, #1954 ) ; +#2501 = LINE ( 'NONE', #920, #1454 ) ; +#2502 = DIRECTION ( 'NONE', ( 0.9063077870366479400, -0.4226182617407036600, 0.0000000000000000000 ) ) ; +#2503 = FACE_BOUND ( 'NONE', #39, .T. ) ; +#2504 = VERTEX_POINT ( 'NONE', #383 ) ; +#2505 = LINE ( 'NONE', #159, #251 ) ; +#2506 = FACE_OUTER_BOUND ( 'NONE', #1394, .T. ) ; +#2507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, -4.767077332085781600E-016 ) ) ; +#2509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2510 = DIRECTION ( 'NONE', ( -0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2511 = EDGE_CURVE ( 'NONE', #602, #1569, #1984, .T. ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, 4.650000000000001200 ) ) ; +#2514 = AXIS2_PLACEMENT_3D ( 'NONE', #2627, #1400, #2252 ) ; +#2515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5372787775435150500, -0.8434047161365331200 ) ) ; +#2516 = PLANE ( 'NONE', #377 ) ; +#2517 = PLANE ( 'NONE', #507 ) ; +#2518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 5.668799859874737800E-017 ) ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( -6.642529349345416300, 22.73394224359666200, -12.55000000000001100 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( -6.407348466566466200, 16.31409125502447600, 10.09984830567204600 ) ) ; +#2521 = ADVANCED_FACE ( 'NONE', ( #419 ), #1448, .T. ) ; +#2522 = EDGE_CURVE ( 'NONE', #2563, #2563, #855, .T. ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -19.04999999999999700 ) ) ; +#2524 = LINE ( 'NONE', #1169, #2472 ) ; +#2525 = EDGE_CURVE ( 'NONE', #1006, #1324, #1416, .T. ) ; +#2526 = DIRECTION ( 'NONE', ( 6.124977852475756900E-017, -8.366254228761971700E-033, 1.000000000000000000 ) ) ; +#2527 = FACE_OUTER_BOUND ( 'NONE', #940, .T. ) ; +#2528 = VECTOR ( 'NONE', #1807, 1000.000000000000000 ) ; +#2529 = DIRECTION ( 'NONE', ( 0.4226182617407037700, -0.9063077870366479400, -3.755786496842899800E-015 ) ) ; +#2530 = AXIS2_PLACEMENT_3D ( 'NONE', #609, #1052, #2510 ) ; +#2531 = FILL_AREA_STYLE ('',( #2141 ) ) ; +#2532 = LINE ( 'NONE', #2266, #1426 ) ; +#2533 = ORIENTED_EDGE ( 'NONE', *, *, #1675, .T. ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, -31.75000000000000700, -19.41899193816127300 ) ) ; +#2535 = VECTOR ( 'NONE', #949, 1000.000000000000100 ) ; +#2536 = ORIENTED_EDGE ( 'NONE', *, *, #2166, .F. ) ; +#2537 = ADVANCED_FACE ( 'NONE', ( #1918 ), #827, .T. ) ; +#2538 = VECTOR ( 'NONE', #454, 1000.000000000000100 ) ; +#2539 = DIRECTION ( 'NONE', ( -0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2540 = AXIS2_PLACEMENT_3D ( 'NONE', #2110, #2685, #1472 ) ; +#2541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.917627327316413300E-015 ) ) ; +#2542 = CARTESIAN_POINT ( 'NONE', ( -42.89447850551818700, 18.25693368150960100, 0.9131307086377289400 ) ) ; +#2543 = EDGE_CURVE ( 'NONE', #1529, #2217, #2416, .T. ) ; +#2544 = ORIENTED_EDGE ( 'NONE', *, *, #881, .F. ) ; +#2545 = DIRECTION ( 'NONE', ( 1.360511966369934800E-015, -2.917627327316413300E-015, 1.000000000000000000 ) ) ; +#2546 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, -0.4596409225295753900, -0.1499999999999938900 ) ) ; +#2547 = ADVANCED_FACE ( 'NONE', ( #208 ), #1250, .T. ) ; +#2548 = CIRCLE ( 'NONE', #1475, 22.85999999999999900 ) ; +#2549 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 5.668799859874737800E-017 ) ) ; +#2550 = EDGE_CURVE ( 'NONE', #2574, #826, #708, .T. ) ; +#2551 = LINE ( 'NONE', #443, #2026 ) ; +#2552 = LINE ( 'NONE', #290, #1892 ) ; +#2553 = AXIS2_PLACEMENT_3D ( 'NONE', #1366, #1152, #1141 ) ; +#2554 = LINE ( 'NONE', #1401, #2032 ) ; +#2555 = ADVANCED_FACE ( 'NONE', ( #138 ), #2516, .T. ) ; +#2556 = VERTEX_POINT ( 'NONE', #1906 ) ; +#2557 = LINE ( 'NONE', #2299, #2034 ) ; +#2558 = EDGE_LOOP ( 'NONE', ( #1819, #1834, #1866, #1885, #1915, #1916, #1043, #1947, #1968, #2002, #2039, #2081 ) ) ; +#2559 = AXIS2_PLACEMENT_3D ( 'NONE', #2257, #340, #1835 ) ; +#2560 = VECTOR ( 'NONE', #947, 1000.000000000000100 ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711753600, -31.75000000000000000, -22.76974387893084600 ) ) ; +#2562 = EDGE_LOOP ( 'NONE', ( #2385, #2424, #2484, #1343, #1464, #1179, #1038, #1200 ) ) ; +#2563 = VERTEX_POINT ( 'NONE', #714 ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( -6.407348466566466200, -16.31409125502447600, 10.09984830567204600 ) ) ; +#2565 = EDGE_LOOP ( 'NONE', ( #2202 ) ) ; +#2566 = ADVANCED_FACE ( 'NONE', ( #1785 ), #417, .F. ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( -10.33107732308851500, 24.72855494203896900, 2.649999999999999500 ) ) ; +#2568 = EDGE_CURVE ( 'NONE', #1904, #497, #1276, .T. ) ; +#2569 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ; +#2570 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #1815, #544 ) ; +#2571 = PLANE ( 'NONE', #1376 ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, 19.69033990990240600, 7.450000000000002000 ) ) ; +#2573 = DIRECTION ( 'NONE', ( 0.4226182617406970500, -0.9063077870366511600, -1.073081856240824500E-014 ) ) ; +#2574 = VERTEX_POINT ( 'NONE', #1072 ) ; +#2575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( -41.35587586714707700, -21.55647768741074800, -17.35000000000000100 ) ) ; +#2577 = LINE ( 'NONE', #1843, #2053 ) ; +#2578 = ADVANCED_FACE ( 'NONE', ( #2354 ), #2293, .F. ) ; +#2579 = DIRECTION ( 'NONE', ( -0.2113091308703547400, -0.4531538935183300800, -0.8660254037844347100 ) ) ; +#2580 = DIRECTION ( 'NONE', ( -0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2581 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, -0.0000000000000000000 ) ) ; +#2582 = LINE ( 'NONE', #2606, #1487 ) ; +#2583 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397161600, 19.69033990990226400, -14.54999999999996000 ) ) ; +#2584 = LINE ( 'NONE', #1884, #2128 ) ; +#2585 = EDGE_CURVE ( 'NONE', #34, #359, #1213, .T. ) ; +#2586 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#2587 = VECTOR ( 'NONE', #1159, 1000.000000000000000 ) ; +#2588 = LINE ( 'NONE', #1197, #1005 ) ; +#2589 = ORIENTED_EDGE ( 'NONE', *, *, #2661, .F. ) ; +#2590 = VECTOR ( 'NONE', #512, 1000.000000000000000 ) ; +#2591 = DIRECTION ( 'NONE', ( -0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674643400, 22.85997687295763100, 12.69999999999999900 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493036400, -31.75000000000000000, -129.5477436145402200 ) ) ; +#2594 = LINE ( 'NONE', #886, #2538 ) ; +#2595 = EDGE_LOOP ( 'NONE', ( #725, #1736, #2051, #965 ) ) ; +#2596 = ADVANCED_FACE ( 'NONE', ( #723 ), #535, .T. ) ; +#2597 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ; +#2598 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2599 = DIRECTION ( 'NONE', ( -0.4226182617407043300, 0.9063077870366477200, 0.0000000000000000000 ) ) ; +#2600 = EDGE_CURVE ( 'NONE', #539, #2105, #1103, .T. ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 5.258561630003524300E-013, -31.75000000000000000, -14.55000000000027100 ) ) ; +#2602 = EDGE_CURVE ( 'NONE', #2331, #453, #1601, .T. ) ; +#2603 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, -31.75000000000000700, 6.349999999999994300 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, -25.39999999999999900 ) ) ; +#2606 = CARTESIAN_POINT ( 'NONE', ( -5.437453367024188500, 14.23414450188777100, -8.774848305672051700 ) ) ; +#2607 = VECTOR ( 'NONE', #1028, 1000.000000000000100 ) ; +#2608 = PLANE ( 'NONE', #241 ) ; +#2609 = CARTESIAN_POINT ( 'NONE', ( 1.900431106201196900E-013, -31.75000000000000000, -12.54999999999999200 ) ) ; +#2610 = LINE ( 'NONE', #666, #963 ) ; +#2612 = LINE ( 'NONE', #644, #964 ) ; +#2611 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #2493 ) ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, -3.002671082198546400E-015 ) ) ; +#2614 = FACE_OUTER_BOUND ( 'NONE', #2245, .T. ) ; +#2615 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .F. ) ; +#2616 = LINE ( 'NONE', #586, #460 ) ; +#2617 = EDGE_CURVE ( 'NONE', #497, #582, #1201, .T. ) ; +#2618 = EDGE_CURVE ( 'NONE', #2038, #2038, #502, .T. ) ; +#2619 = VECTOR ( 'NONE', #1083, 1000.000000000000100 ) ; +#2620 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2621 = VERTEX_POINT ( 'NONE', #1553 ) ; +#2622 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#2623 = AXIS2_PLACEMENT_3D ( 'NONE', #70, #516, #2013 ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( -8.908298816937033800, 21.67739658924489600, -0.1499999999999938900 ) ) ; +#2625 = DIRECTION ( 'NONE', ( -0.4226182617406970500, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#2626 = CARTESIAN_POINT ( 'NONE', ( -9.591495365042282700, -23.14251631472483000, 2.649999999999999500 ) ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, -19.97287935166955800, 2.649999999999999500 ) ) ; +#2628 = DIRECTION ( 'NONE', ( -0.4226182617407034900, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#2629 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2630 = EDGE_CURVE ( 'NONE', #1307, #756, #1699, .T. ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( -10.84678612752412400, 31.75000000000000700, -0.1499999999999938900 ) ) ; +#2632 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #1187, #2633 ) ; +#2633 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2634 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2635 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Clamp_1', ( #1776, #607 ), #2084 ) ; +#2636 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2637 = DIRECTION ( 'NONE', ( -0.9063077870366510500, -0.4226182617406970500, -0.0000000000000000000 ) ) ; +#2638 = VECTOR ( 'NONE', #1869, 1000.000000000000000 ) ; +#2639 = LINE ( 'NONE', #1590, #2056 ) ; +#2640 = DIRECTION ( 'NONE', ( 0.4226182617407037700, 0.9063077870366479400, -6.842277657836020900E-049 ) ) ; +#2641 = VECTOR ( 'NONE', #1668, 1000.000000000000100 ) ; +#2642 = VECTOR ( 'NONE', #1365, 1000.000000000000000 ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267416300, 26.31215327778011200, 2.649999999999999500 ) ) ; +#2644 = CARTESIAN_POINT ( 'NONE', ( -42.22607020397156000, -19.69033990990240600, 7.450000000000002000 ) ) ; +#2645 = LINE ( 'NONE', #1617, #2133 ) ; +#2646 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .T. ) ; +#2647 = EDGE_CURVE ( 'NONE', #190, #885, #2169, .T. ) ; +#2648 = CIRCLE ( 'NONE', #2441, 1.750000000000002400 ) ; +#2649 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2650 = CARTESIAN_POINT ( 'NONE', ( -33.81898550632596600, -19.97287935166965100, -17.35000000000000100 ) ) ; +#2651 = VERTEX_POINT ( 'NONE', #16 ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( -3.113365109630341600, -9.250121150031734600, 5.599848305672035800 ) ) ; +#2653 = EDGE_CURVE ( 'NONE', #239, #2004, #1015, .T. ) ; +#2654 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .T. ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( -39.36100314661910500, -31.75000000000000700, -129.5477436145402200 ) ) ; +#2656 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2657 = PLANE ( 'NONE', #912 ) ; +#2658 = DIRECTION ( 'NONE', ( -0.4226182617407039900, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#2659 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406970500, 0.0000000000000000000 ) ) ; +#2660 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732198600, 22.83001686389458500, 0.0000000000000000000 ) ) ; +#2661 = EDGE_CURVE ( 'NONE', #673, #1960, #2144, .T. ) ; +#2662 = AXIS2_PLACEMENT_3D ( 'NONE', #2650, #344, #1204 ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393139766800, 0.4596409225297514700, -18.15000000000025800 ) ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#2665 = CARTESIAN_POINT ( 'NONE', ( -41.29949045720610500, 21.67739658924494300, 1.850000000000001000 ) ) ; +#2666 = FACE_OUTER_BOUND ( 'NONE', #2074, .T. ) ; +#2667 = DIRECTION ( 'NONE', ( 0.9063077870366479400, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#2668 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ; +#2669 = VECTOR ( 'NONE', #2518, 1000.000000000000000 ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 0.9857031393140599500, 0.4596409225295753900, -0.1499999999999938900 ) ) ; +#2671 = LINE ( 'NONE', #971, #1037 ) ; +#2672 = ORIENTED_EDGE ( 'NONE', *, *, #1576, .T. ) ; +#2673 = FACE_OUTER_BOUND ( 'NONE', #1934, .T. ) ; +#2674 = VECTOR ( 'NONE', #1910, 1000.000000000000100 ) ; +#2675 = LINE ( 'NONE', #1294, #1630 ) ; +#2676 = ORIENTED_EDGE ( 'NONE', *, *, #35, .T. ) ; +#2677 = VERTEX_POINT ( 'NONE', #2406 ) ; +#2678 = EDGE_CURVE ( 'NONE', #1619, #1597, #2594, .T. ) ; +#2679 = EDGE_LOOP ( 'NONE', ( #2485, #994, #1961, #2326 ) ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( -7.325725897450663400, 24.19906196907659200, 2.649999999999999500 ) ) ; +#2681 = CARTESIAN_POINT ( 'NONE', ( -8.731436723960261000, 21.29811460688040700, -13.27484830567190100 ) ) ; +#2682 = DIRECTION ( 'NONE', ( 0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2683 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #1840, #572 ) ; +#2684 = CARTESIAN_POINT ( 'NONE', ( -13.60523092493035700, 31.75000000000000000, -12.54999999999996900 ) ) ; +#2685 = DIRECTION ( 'NONE', ( -5.668799859874739000E-017, 1.215678053048507800E-016, 1.000000000000000000 ) ) ; +#2686 = CARTESIAN_POINT ( 'NONE', ( -16.38880376781713700, 19.97287935166955800, 2.649999999999999500 ) ) ; +#2687 = EDGE_CURVE ( 'NONE', #2184, #276, #1505, .T. ) ; +#2688 = LINE ( 'NONE', #2655, #993 ) ; +#2689 = FACE_OUTER_BOUND ( 'NONE', #2068, .T. ) ; +#2690 = DIRECTION ( 'NONE', ( -0.9063077870366511600, -0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( -45.21856676291189100, 13.27291032965379400, -4.088130708637633500 ) ) ; +#2692 = CIRCLE ( 'NONE', #1986, 1.749999999999998700 ) ; +#2693 = FACE_OUTER_BOUND ( 'NONE', #1087, .T. ) ; +#2694 = LINE ( 'NONE', #2225, #2587 ) ; +#2695 = VECTOR ( 'NONE', #1389, 1000.000000000000100 ) ; +#2696 = ADVANCED_FACE ( 'NONE', ( #302 ), #24, .F. ) ; +#2697 = ORIENTED_EDGE ( 'NONE', *, *, #2344, .T. ) ; +#2698 = FACE_OUTER_BOUND ( 'NONE', #1567, .T. ) ; +#2699 = DIRECTION ( 'NONE', ( -0.9063077870366511600, 0.4226182617406971700, 0.0000000000000000000 ) ) ; +#2700 = VERTEX_POINT ( 'NONE', #1109 ) ; +#2701 = EDGE_CURVE ( 'NONE', #582, #524, #371, .T. ) ; +#2702 = AXIS2_PLACEMENT_3D ( 'NONE', #921, #1140, #2580 ) ; +#2703 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 5.551115123125782700E-017 ) ) ; +#2704 = SURFACE_STYLE_USAGE ( .BOTH. , #1275 ) ; +#2705 = ADVANCED_FACE ( 'NONE', ( #1368 ), #1114, .T. ) ; +#2706 = EDGE_LOOP ( 'NONE', ( #1847 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_2.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_2.step new file mode 100644 index 0000000..9f78872 --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_2.step @@ -0,0 +1,1213 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Clamp_2.step', + '2016-04-19T10:44:30', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 12.04692184158474600, 29.37575563024601900, -14.71107366335239200 ) ) ; +#2 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#3 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #179, #781 ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 8.675724398579086800, 30.54326845479797800, -11.94122942638240800 ) ) ; +#6 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407036000, 0.0000000000000000000 ) ) ; +#7 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 1.831972042590586800, 31.69825001869303100, -13.32927251831338100 ) ) ; +#9 = EDGE_CURVE ( 'NONE', #868, #1017, #847, .T. ) ; +#10 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 2.384498992531997300, 31.66149146496748700, 0.2890790384923570000 ) ) ; +#13 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#14 = EDGE_CURVE ( 'NONE', #904, #893, #833, .T. ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 8.992849320831537000, 30.45132694334336400, -0.6874793228431064200 ) ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267422500, 26.31215327778009800, -15.34999999999998500 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -25.39999999999999900 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 10.80042984328229300, -32.65142720389067700, 2.650000000000012300 ) ) ; +#19 = ORIENTED_EDGE ( 'NONE', *, *, #704, .F. ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 12.10294203056932900, 29.35271844384025600, 2.341844571676507100 ) ) ; +#21 = EDGE_CURVE ( 'NONE', #1009, #1021, #848, .T. ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 0.5830345411827776400, -31.74468224139581500, 3.284313810124854800 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( 10.37983070971812300, 30.00671072057225400, 5.431149910152111500 ) ) ; +#24 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25 = PLANE ( 'NONE', #313 ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 3.509887426912757100, 31.55682255268905900, 5.526439490854729200 ) ) ; +#27 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427476700, -25.39999999999999900, 12.69999999999999900 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 0.6514593209384965700, -31.74342114002746100, 3.429536208538165100 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #33, #1137, #830, .T. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 0.4592077062179238900, 31.74667902658606500, 2.801367077626550000 ) ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 12.69999999999999900 ) ) ; +#33 = VERTEX_POINT ( 'NONE', #211 ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 12.69999999999999900 ) ) ; +#35 = DIRECTION ( 'NONE', ( 1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#36 = EDGE_CURVE ( 'NONE', #326, #1059, #835, .T. ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 11.12483141320863700, -29.73827047090220400, -13.12330412618365300 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427469600, -25.39999999999999900, -25.39999999999999900 ) ) ; +#39 = AXIS2_PLACEMENT_3D ( 'NONE', #650, #544, #560 ) ; +#40 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#41 = ADVANCED_FACE ( 'NONE', ( #821, #827 ), #203, .F. ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -25.39999999999999900 ) ) ; +#43 = EDGE_CURVE ( 'NONE', #851, #583, #815, .T. ) ; +#44 = ADVANCED_FACE ( 'NONE', ( #820 ), #816, .T. ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#46 = EDGE_CURVE ( 'NONE', #932, #934, #809, .T. ) ; +#47 = DIRECTION ( 'NONE', ( 0.4226182617407036600, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711753600, -31.75000000000000000, 10.06974387893084400 ) ) ; +#49 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #747, #161, #995 ) ; +#51 = ADVANCED_FACE ( 'NONE', ( #802 ), #1075, .F. ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 0.9115127445768086400, -31.73708492743364900, -14.16982071568712300 ) ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 3.237646802095315700, -25.20785194250353500, -15.34999999999998500 ) ) ; +#54 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 1.215198764242208000, -31.72695373851045600, -16.86424725152998100 ) ) ; +#56 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#57 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58 = EDGE_CURVE ( 'NONE', #432, #868, #800, .T. ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 8.676924846984345400, -30.54292959139538500, -18.75853804904268800 ) ) ; +#60 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#61 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62 = EDGE_CURVE ( 'NONE', #941, #387, #814, .T. ) ; +#63 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ; +#65 = EDGE_LOOP ( 'NONE', ( #1078 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 7.775344845879404300, -30.78952425465929500, -0.9005776930427513700 ) ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#68 = EDGE_LOOP ( 'NONE', ( #205 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 0.4877383422404642000, 31.74628851188409600, -15.67916571617547600 ) ) ; +#70 = EDGE_CURVE ( 'NONE', #510, #1084, #803, .T. ) ; +#71 = EDGE_CURVE ( 'NONE', #901, #432, #798, .T. ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 5.025991336548663000, 31.35114881951468000, -18.67322389886153600 ) ) ; +#73 = AXIS2_PLACEMENT_3D ( 'NONE', #312, #309, #242 ) ; +#74 = ADVANCED_FACE ( 'NONE', ( #799, #791, #795, #793, #789 ), #774, .T. ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 11.34301892364250700, 29.65530902757296900, -17.35365642456555000 ) ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915817100, -28.42524458648363600, -15.34999999999998500 ) ) ; +#77 = DIRECTION ( 'NONE', ( 0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 10.38166418894057400, -30.00607763514942800, -0.1300897678821696100 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 11.90259586660416100, 29.43456905953593900, -14.25753000038670300 ) ) ; +#80 = EDGE_CURVE ( 'NONE', #33, #934, #867, .T. ) ; +#81 = EDGE_LOOP ( 'NONE', ( #216 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -129.5477436145402200 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 7.770699474533278900, 30.78602345392630800, -11.81821873520380700 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -5.724587470723463400E-014, -20.32000000000000400, -25.41000000000001100 ) ) ; +#85 = EDGE_CURVE ( 'NONE', #966, #868, #788, .T. ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 1.218533878776117100, 31.72682695116487000, -13.83251503512791400 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117394872500, 31.74666501544409100, 2.640693742246996000 ) ) ; +#88 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#89 = STYLED_ITEM ( 'NONE', ( #513 ), #1012 ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, 6.349999999999994300 ) ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 3.240515053037276200, 31.58552089137990000, -0.1200196410188723600 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915822400, 28.42524458648362200, -15.34999999999998500 ) ) ; +#93 = EDGE_LOOP ( 'NONE', ( #1015 ) ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, 0.0000000000000000000 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 9.854252902086074100, 30.18339277657299000, -0.3972137468498576100 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 0.8149384332303927200, -31.73964492980387000, 3.701237223281006900 ) ) ; +#97 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 12.11464643598193200, 29.34787628188820100, 2.820738063346324600 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 0.9115127445768181900, -31.73708492743365600, 3.830179284312923600 ) ) ; +#100 = EDGE_CURVE ( 'NONE', #869, #910, #784, .T. ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( 9.555401029611434900, 30.27952794863603700, 5.814845701673103700 ) ) ; +#102 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 1.120357174270445500, -31.73039890982655500, 4.069853404369083300 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 2.648208156011653300, 31.64066046562329900, 5.148716163029703800 ) ) ; +#105 = EDGE_CURVE ( 'NONE', #258, #1137, #786, .T. ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 7.162684163109553900, -30.93801932579327000, -0.9205576629744648400 ) ) ; +#107 = ORIENTED_EDGE ( 'NONE', *, *, #957, .F. ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -129.5477436145402200 ) ) ; +#109 = DIRECTION ( 'NONE', ( -0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#110 = EDGE_CURVE ( 'NONE', #469, #469, #773, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 10.39029207903771600, -30.00308473046267800, -12.57500993875207100 ) ) ; +#112 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#113 = ORIENTED_EDGE ( 'NONE', *, *, #14, .T. ) ; +#114 = EDGE_CURVE ( 'NONE', #33, #1027, #756, .T. ) ; +#115 = AXIS2_PLACEMENT_3D ( 'NONE', #269, #506, #61 ) ; +#116 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#117 = EDGE_CURVE ( 'NONE', #457, #457, #762, .T. ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, 12.69999999999999900 ) ) ; +#119 = EDGE_CURVE ( 'NONE', #451, #451, #749, .T. ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.349999999999999600 ) ) ; +#121 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #6, #2 ) ; +#122 = ADVANCED_FACE ( 'NONE', ( #769, #745 ), #229, .F. ) ; +#123 = DIRECTION ( 'NONE', ( 0.4226182617407034900, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 12.69999999999999900 ) ) ; +#125 = EDGE_LOOP ( 'NONE', ( #249 ) ) ; +#126 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 6.859617375172332400, -31.00172096008136400, -11.79902769917957200 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 11.70443673798759400, -29.51454464975315900, 1.138158031850826000 ) ) ; +#129 = DIRECTION ( 'NONE', ( 0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#130 = EDGE_CURVE ( 'NONE', #1027, #258, #750, .T. ) ; +#131 = ADVANCED_FACE ( 'NONE', ( #736 ), #732, .T. ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 0.6514593209384990100, -31.74342114002745400, -14.57046379146189000 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761001600, -29.34758967582916300, 2.647360026851643500 ) ) ; +#134 = ADVANCED_FACE ( 'NONE', ( #744, #731 ), #727, .F. ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 1.825962864958449200, -31.69860280804920200, -17.36666517079004300 ) ) ; +#136 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #208 ) ; +#137 = EDGE_CURVE ( 'NONE', #448, #448, #729, .T. ) ; +#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#139 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #89 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 9.560016013466951200, -30.27807058148517100, -18.51317194398970800 ) ) ; +#141 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#143 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#144 = AXIS2_PLACEMENT_3D ( 'NONE', #308, #300, #244 ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 0.6505865804469184200, 31.74343910451092700, -16.12786758034016200 ) ) ; +#146 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 5.941564424042795200, 31.19065603372887500, -18.82918174792094100 ) ) ; +#148 = EDGE_CURVE ( 'NONE', #446, #446, #725, .T. ) ; +#149 = PLANE ( 'NONE', #463 ) ; +#150 = ADVANCED_FACE ( 'NONE', ( #733, #722 ), #717, .F. ) ; +#151 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 11.70151677926810900, 29.51513435498385400, -16.84513381687507700 ) ) ; +#153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 11.69257407131952300, 29.51867988310788200, -13.83993794375514200 ) ) ; +#155 = DIRECTION ( 'NONE', ( 0.4226182617407036000, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#156 = AXIS2_PLACEMENT_3D ( 'NONE', #647, #163, #752 ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 6.844465011978449800, 31.00506931460411800, -11.79949825658845500 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 10.80042984328229700, 32.65142720389066300, -15.34999999999998500 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 0.8989030045215895500, 31.73744279467984700, -14.18591354579895000 ) ) ; +#160 = EDGE_CURVE ( 'NONE', #445, #445, #720, .T. ) ; +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -19.04999999999999700 ) ) ; +#163 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 4.125671188300180400, 31.48221754378958400, -0.4379889853638978000 ) ) ; +#165 = EDGE_CURVE ( 'NONE', #443, #443, #716, .T. ) ; +#166 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, -0.0000000000000000000 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 10.65473741270299300, 29.90990450437591600, 0.04238843525057792200 ) ) ; +#168 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #213, #310 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 1.232678197684753200, -31.72628212894838000, 4.181073731204503700 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 12.04692184158473400, 29.37575563024601900, 3.288926336647574300 ) ) ; +#171 = EDGE_CURVE ( 'NONE', #440, #440, #715, .T. ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 1.586982806760944200, -31.71119484708440000, 4.495768943320007000 ) ) ; +#173 = AXIS2_PLACEMENT_3D ( 'NONE', #730, #219, #838 ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 8.675724398579093900, 30.54326845479797100, 6.058770573617587200 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 1.831972042590587700, 31.69825001869303800, 4.670727481686634000 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 5.920921945032070300, -31.19948344996205900, -0.8417354401907216600 ) ) ; +#178 = EDGE_CURVE ( 'NONE', #934, #1059, #737, .T. ) ; +#179 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 0.0000000000000000000 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 5.309833927354988600, -31.30877159937477200, -0.7441290778922129400 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 12.11549054132076700, -29.34752781699757300, -15.19209524292361400 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 12.69999999999999900 ) ) ; +#184 = EDGE_CURVE ( 'NONE', #439, #439, #723, .T. ) ; +#185 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #89 ), #230 ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 9.568033731014466500, -30.27553755085226000, -12.18974295668327000 ) ) ; +#187 = PLANE ( 'NONE', #371 ) ; +#188 = AXIS2_PLACEMENT_3D ( 'NONE', #963, #663, #759 ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 1.848031147536295800, -31.69731839217867300, 4.681661413165940600 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915813800, -28.42524458648364300, 2.650000000000012300 ) ) ; +#192 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732305000, -22.83001686389457800, 0.0000000000000000000 ) ) ; +#194 = ADVANCED_FACE ( 'NONE', ( #753, #706, #709 ), #364, .T. ) ; +#195 = EDGE_CURVE ( 'NONE', #431, #431, #700, .T. ) ; +#196 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#197 = ADVANCED_FACE ( 'NONE', ( #705 ), #694, .F. ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 5.329293889122654400, -31.30549199476852400, -11.95218059745546100 ) ) ; +#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#200 = AXIS2_PLACEMENT_3D ( 'NONE', #724, #933, #348 ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 0.4875518653748700000, -31.74629227267290000, -15.02100983501347600 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761003500, -29.34758967582915500, -15.35263997314826900 ) ) ; +#203 = PLANE ( 'NONE', #794 ) ; +#204 = ADVANCED_FACE ( 'NONE', ( #696 ), #25, .T. ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #209, .T. ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 2.645089632831222600, -31.64094050945941200, -17.84723891565647900 ) ) ; +#207 = DIRECTION ( 'NONE', ( -0.4226182617407037700, -0.9063077870366478300, 0.0000000000000000000 ) ) ; +#208 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#209 = EDGE_CURVE ( 'NONE', #430, #430, #765, .T. ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 10.38166418894065000, -30.00607763514939600, -18.13008976788212900 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711754500, -31.75000000000000000, -19.04999999999999700 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267422500, -26.31215327778009800, -15.34999999999998500 ) ) ; +#213 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #589, .NOT_KNOWN. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #178, .T. ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 1.113467184785966300, 31.73134830715815400, -16.77501045343396800 ) ) ; +#216 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #775, .T. ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 7.179909573904427400, 30.93398594210628600, -18.92038589693007100 ) ) ; +#219 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 11.91055676282446800, 29.43134658357693200, -16.42287658881559800 ) ) ; +#221 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 11.33090044553328500, 29.65994809896293900, -13.33286802955603900 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915822400, -28.42524458648362900, 2.650000000000012300 ) ) ; +#224 = EDGE_CURVE ( 'NONE', #1059, #583, #699, .T. ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 5.313830729178016900, 31.30813249053451100, -11.95500522175624500 ) ) ; +#226 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 0.6422634119658402500, 31.74360553358814100, -14.58860508777539300 ) ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( 0.4877383422404246700, 31.74628851188409600, 2.320834283824559000 ) ) ; +#229 = PLANE ( 'NONE', #549 ) ; +#230 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #473 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #40, #588, #116 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 5.025991336548602600, 31.35114881951468700, -0.6732238988615305600 ) ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .T. ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 26.20766222290532000, -39.83593765348262400, -15.34999999999998500 ) ) ; +#235 = ORIENTED_EDGE ( 'NONE', *, *, #704, .T. ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 11.34301892364245700, 29.65530902757296200, 0.6463435754344244400 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 2.386135539064614200, -31.66135767093107500, 5.011738902479656600 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 11.90259586660415400, 29.43456905953593900, 3.742469999613253300 ) ) ; +#239 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 2.664458036868331300, -31.63929752874560800, 5.156869266220454900 ) ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 7.770699474533292200, 30.78602345392629400, 6.181781264796185800 ) ) ; +#242 = DIRECTION ( 'NONE', ( 0.4226182617407036600, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 1.218533878776111100, 31.72682695116486300, 4.167484964872107500 ) ) ; +#244 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( 0.6400011675530958800, -31.74365093621478500, 1.893086732817302900 ) ) ; +#247 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ; +#248 = AXIS2_PLACEMENT_3D ( 'NONE', #1102, #477, #35 ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, 12.69999999999999900 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 4.406266743683887400, -31.44423742489205200, -0.5201807492534732400 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 12.04936637774201800, -29.37475244302523000, -14.72166824916786300 ) ) ; +#253 = EDGE_CURVE ( 'NONE', #1116, #258, #702, .T. ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 8.688865180568193100, -30.53952932488403600, -11.94389831032807300 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427361300, 25.39999999999999900, 12.69999999999999900 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, 6.349999999999994300 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711752700, -31.75000000000000000, -129.5477436145402200 ) ) ; +#258 = VERTEX_POINT ( 'NONE', #1148 ) ; +#259 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #589 ) ) ; +#260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#261 = ADVANCED_FACE ( 'NONE', ( #695, #689, #687 ), #149, .F. ) ; +#262 = DIRECTION ( 'NONE', ( -0.9063077870366479400, -0.4226182617407037700, -0.0000000000000000000 ) ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #870, #660, #975 ) ; +#264 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #344, 'distance_accuracy_value', 'NONE'); +#265 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#266 = ADVANCED_FACE ( 'NONE', ( #690, #676 ), #1151, .F. ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -25.39999999999999900 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 3.519732692584727700, -31.55949810664976200, -12.45222708820037600 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#270 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ; +#271 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#272 = EDGE_CURVE ( 'NONE', #387, #583, #680, .T. ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 0.4589626304464417000, -31.74668257967042000, -15.49891986955537400 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117393369300, 31.74666501544398800, -15.35930625775305800 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 3.514429782635677000, -31.55630594801134900, -18.22812151806862200 ) ) ; +#276 = SURFACE_SIDE_STYLE ('',( #460 ) ) ; +#277 = EDGE_CURVE ( 'NONE', #1027, #932, #673, .T. ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000700, -19.04999999999999700 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 11.11828288544709400, -29.74071730234387400, -17.58279770053038100 ) ) ; +#280 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ; +#281 = DIRECTION ( 'NONE', ( 0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#282 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#283 = AXIS2_PLACEMENT_3D ( 'NONE', #16, #450, #306 ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 1.843936823309321600, 31.69756732342782300, -17.37896201174623600 ) ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( 12.06103975971404200, -29.37016242589982100, 2.014614172797959800 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 8.692317356623840800, 30.53855414584193200, -18.75542970756122700 ) ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 5.377642775528102000E-014, 20.31999999999999700, -25.41000000000001100 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 12.05109080388096700, 29.37404460191509900, -15.97069053572409200 ) ) ; +#289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -129.5477436145402200 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 10.63873623084172100, 29.91562174802028900, -12.73120030858909500 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#293 = AXIS2_PLACEMENT_3D ( 'NONE', #390, #1099, #474 ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( 4.105091933390546900, 31.48492622811616200, -12.26830620830119800 ) ) ; +#295 = DIRECTION ( 'NONE', ( -0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 3.519732692584761400, -31.55949810664979100, 5.547772911799647500 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 0.4833522933984776300, 31.74635370935032000, -15.04121803127889300 ) ) ; +#298 = EDGE_CURVE ( 'NONE', #904, #1116, #678, .T. ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 0.6505865804468694600, 31.74343910451093400, 1.872132419659861700 ) ) ; +#300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ; +#302 = ORIENTED_EDGE ( 'NONE', *, *, #324, .T. ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 26.20766222290532000, 39.83593765348262400, -15.34999999999998500 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 5.941564424042741000, 31.19065603372889900, -0.8291817479209451200 ) ) ; +#305 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ; +#306 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 11.70151677926806500, 29.51513435498386400, 1.154866183124888800 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#309 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#310 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #141, 'design' ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 11.69257407131953200, 29.51867988310787200, 4.160062056244826500 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915813800, -28.42524458648364300, 2.650000000000012300 ) ) ; +#313 = AXIS2_PLACEMENT_3D ( 'NONE', #568, #1096, #1092 ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( 6.844465011978458700, 31.00506931460412800, 6.200501743411538600 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 12.69999999999999900 ) ) ; +#316 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 4.121906577499312400, -31.48722103580314200, 5.750801591510707100 ) ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( 0.8989030045215772300, 31.73744279467985400, 3.814086454201072400 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 6.349999999999994300 ) ) ; +#320 = EDGE_CURVE ( 'NONE', #387, #1084, #669, .T. ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -19.04999999999999700 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 4.107311777513792200, -31.48462564084045200, -0.4323423603429509800 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 11.90674743281621400, -29.43288886053349900, -14.26770041265317200 ) ) ; +#324 = EDGE_CURVE ( 'NONE', #1021, #932, #670, .T. ) ; +#325 = PLANE ( 'NONE', #1065 ) ; +#326 = VERTEX_POINT ( 'NONE', #846 ) ; +#327 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #357 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1136, #501, #56 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#328 = CARTESIAN_POINT ( 'NONE', ( 7.785050011644998800, -30.78239178980619100, -11.81932948896722000 ) ) ; +#329 = DIRECTION ( 'NONE', ( 1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#330 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #88, #27 ) ; +#331 = ADVANCED_FACE ( 'NONE', ( #651 ), #435, .F. ) ; +#332 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Clamp_2', ( #1012, #115 ), #327 ) ; +#333 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ; +#334 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ; +#335 = ADVANCED_FACE ( 'NONE', ( #658 ), #640, .F. ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 2.386135539064585300, -31.66135767093106800, -12.98826109752037700 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 3.237646802095315700, 25.20785194250353500, -15.34999999999998500 ) ) ; +#338 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #231, #542 ) ; +#339 = ORIENTED_EDGE ( 'NONE', *, *, #742, .F. ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 0.5729486152923967100, -31.74486189646728800, -15.95911462920450100 ) ) ; +#341 = FILL_AREA_STYLE_COLOUR ( '', #408 ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 4.406266743683982400, -31.44423742489204400, -18.52018074925348800 ) ) ; +#343 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#344 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#345 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ; +#346 = EDGE_CURVE ( 'NONE', #1027, #904, #652, .T. ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( 11.70443673798764900, -29.51454464975313400, -16.86184196814909000 ) ) ; +#348 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 2.664858760312460700, 31.63928879694268700, -17.85718766418555200 ) ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761001800, -29.34758967582917000, 2.647360026851645700 ) ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ; +#352 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 9.573447994677863400, 30.27381285881855500, -18.50821140332331200 ) ) ; +#354 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 12.11598702784928800, 29.34732285689538100, -15.49685977008395300 ) ) ; +#356 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#357 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1136, 'distance_accuracy_value', 'NONE'); +#358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 9.840002897518486300, 30.18804261305031000, -12.29668533386037600 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915822400, -28.42524458648362200, -15.34999999999998500 ) ) ; +#361 = EDGE_CURVE ( 'NONE', #901, #1084, #648, .T. ) ; +#362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 3.218127938864548700, 31.58778329841339200, -12.58939011110547100 ) ) ; +#364 = PLANE ( 'NONE', #121 ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #890, .F. ) ; +#366 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( 5.329293889122703300, -31.30549199476852400, 6.047819402544545800 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117395215600, 31.74666501544408300, -15.35930625775303700 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 1.113467184785911400, 31.73134830715816800, 1.224989546566053200 ) ) ; +#370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#371 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #796, #260 ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 9.560016013466848200, -30.27807058148518100, -0.5131719439897366500 ) ) ; +#373 = DIRECTION ( 'NONE', ( -0.9063077870366479400, -0.4226182617407037700, -0.0000000000000000000 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 7.179909573904367900, 30.93398594210629000, -0.9203858969300873200 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 5.938096988076697600, -31.19608495055511500, 6.143503608863934300 ) ) ; +#376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#377 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #844, #818 ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 11.91055676282444700, 29.43134658357697800, 1.577123411184369500 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427469600, -25.39999999999999900, -25.39999999999999900 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 6.859617375172378600, -31.00172096008136400, 6.200972300820425600 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 11.33090044553329400, 29.65994809896293600, 4.667131970443930000 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 7.169929826637790900, -30.93145250818383100, 6.205428208749006900 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 5.313830729178028500, 31.30813249053455400, 6.044994778243760100 ) ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, -19.04999999999999700 ) ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 0.5729486152923400900, -31.74486189646728100, 2.040885370795547900 ) ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 7.785050011645043200, -30.78239178980617700, 6.180670511032775300 ) ) ; +#387 = VERTEX_POINT ( 'NONE', #537 ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 0.6422634119658196000, 31.74360553358814100, 3.411394912224637600 ) ) ; +#389 = EDGE_LOOP ( 'NONE', ( #942 ) ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 6.349999999999999600 ) ) ; +#391 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ; +#392 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #373, #859 ) ; +#393 = PLANE ( 'NONE', #200 ) ; +#394 = DIRECTION ( 'NONE', ( -0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 0.8009100866789902200, -31.73999872854084400, 1.619017806361998000 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 11.69838096882466200, -29.51637745357427200, -13.84965198086064600 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#398 = EDGE_CURVE ( 'NONE', #426, #426, #668, .T. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427368400, 25.39999999999999900, -25.39999999999999900 ) ) ; +#400 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ; +#401 = FILL_AREA_STYLE ('',( #1010 ) ) ; +#402 = ADVANCED_FACE ( 'NONE', ( #634 ), #679, .F. ) ; +#403 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1020, #908, #48, #602 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#404 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548023000, 29.11974387893084400, 12.69999999999999600 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 6.349999999999994300 ) ) ; +#406 = ADVANCED_FACE ( 'NONE', ( #635 ), #653, .T. ) ; +#407 = PRESENTATION_STYLE_ASSIGNMENT (( #925 ) ) ; +#408 = COLOUR_RGB ( '',0.9960784313725490300, 0.8705882352941176600, 0.7607843137254901600 ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 1.586982806760923100, -31.71119484708437900, -13.50423105668003000 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( -2.054605004221194500, 24.72611465046597700, 2.650000000000012300 ) ) ; +#411 = EDGE_CURVE ( 'NONE', #901, #966, #633, .T. ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 0.8009100866790478400, -31.73999872854085100, -16.38098219363805100 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 5.920921945032163500, -31.19948344996203500, -18.84173544019072500 ) ) ; +#414 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#415 = CARTESIAN_POINT ( 'NONE', ( 12.06103975971407400, -29.37016242589980700, -15.98538582720195400 ) ) ; +#416 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 3.534422674129817500, 31.55406535755827900, -18.23564292883458600 ) ) ; +#418 = VERTEX_POINT ( 'NONE', #921 ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 10.39374918792282000, 30.00189123341567300, -18.12299113418319500 ) ) ; +#420 = DIRECTION ( 'NONE', ( 0.4226182617407038800, -0.9063077870366478300, 0.0000000000000000000 ) ) ; +#421 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #801, #404, #1016, #405 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#422 = VERTEX_POINT ( 'NONE', #274 ) ; +#423 = VERTEX_POINT ( 'NONE', #811 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 9.841605257036453800, -30.18752146737487200, -0.4026417022695335000 ) ) ; +#425 = VERTEX_POINT ( 'NONE', #202 ) ; +#426 = VERTEX_POINT ( 'NONE', #712 ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 12.10068248561223900, 29.35365101801784200, -15.02212470943324300 ) ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 6.349999999999994300 ) ) ; +#429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131100E-016, 0.0000000000000000000 ) ) ; +#430 = VERTEX_POINT ( 'NONE', #133 ) ; +#431 = VERTEX_POINT ( 'NONE', #607 ) ; +#432 = VERTEX_POINT ( 'NONE', #476 ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 8.972016402014857000, 30.45748550538778700, -12.00722358747401200 ) ) ; +#434 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#435 = PLANE ( 'NONE', #878 ) ; +#436 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #166, #11 ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 2.369959339708414400, 31.66257204556408000, -12.99716344361777900 ) ) ; +#438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#439 = VERTEX_POINT ( 'NONE', #53 ) ; +#440 = VERTEX_POINT ( 'NONE', #497 ) ; +#441 = EDGE_CURVE ( 'NONE', #425, #425, #624, .T. ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 1.843936823309270100, 31.69756732342782300, 0.6210379882537788700 ) ) ; +#443 = VERTEX_POINT ( 'NONE', #1130 ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548131400, -29.11974387893084400, -25.40000000000000200 ) ) ; +#445 = VERTEX_POINT ( 'NONE', #410 ) ; +#446 = VERTEX_POINT ( 'NONE', #1024 ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 10.80042984328229300, 32.65142720389067700, 2.650000000000012300 ) ) ; +#448 = VERTEX_POINT ( 'NONE', #337 ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 8.692317356623785700, 30.53855414584195000, -0.7554297075612327300 ) ) ; +#450 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#451 = VERTEX_POINT ( 'NONE', #806 ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 8.976775898401232500, -30.45608245958473100, -0.6915867361936624000 ) ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( 8.088942714868338200, -30.70387980804900600, 6.151704393204640000 ) ) ; +#454 = DIRECTION ( 'NONE', ( -0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 12.05109080388093700, 29.37404460191510600, 2.029309464275871600 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 8.688865180568234000, -30.53952932488401500, 6.056101689671905300 ) ) ; +#457 = VERTEX_POINT ( 'NONE', #1125 ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 10.63873623084173500, 29.91562174802027100, 5.268799691410881000 ) ) ; +#459 = SHAPE_DEFINITION_REPRESENTATION ( #503, #332 ) ; +#460 = SURFACE_STYLE_FILL_AREA ( #819 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 8.984906353542177400, -30.45368452731085200, 5.989549245810175100 ) ) ; +#462 = CYLINDRICAL_SURFACE ( 'NONE', #691, 6.350000000000001400 ) ; +#463 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #940, #354 ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( 4.105091933390550500, 31.48492622811615500, 5.731693791698809500 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 11.85289532046170900, -29.45477878938014600, 1.412521135710162100 ) ) ; +#466 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 3.514429782635591700, -31.55630594801132800, -0.2281215180686057300 ) ) ; +#468 = CYLINDRICAL_SURFACE ( 'NONE', #616, 1.749999999999994400 ) ; +#469 = VERTEX_POINT ( 'NONE', #808 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 9.568033731014503800, -30.27553755085223500, 5.810257043316704000 ) ) ; +#471 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 0.4833522933984512000, 31.74635370935034100, 2.958781968721134500 ) ) ; +#473 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #40, 'distance_accuracy_value', 'NONE'); +#474 = DIRECTION ( 'NONE', ( 1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#475 = EDGE_CURVE ( 'NONE', #423, #423, #625, .T. ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, 0.0000000000000000000 ) ) ; +#477 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131100E-016, 0.0000000000000000000 ) ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 11.33851565305455700, -29.65703264838065000, -13.34135536854108600 ) ) ; +#479 = FACE_OUTER_BOUND ( 'NONE', #886, .T. ) ; +#480 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#481 = FACE_OUTER_BOUND ( 'NONE', #1119, .T. ) ; +#482 = FACE_OUTER_BOUND ( 'NONE', #1104, .T. ) ; +#483 = ORIENTED_EDGE ( 'NONE', *, *, #298, .F. ) ; +#484 = VECTOR ( 'NONE', #488, 1000.000000000000000 ) ; +#485 = SURFACE_STYLE_USAGE ( .BOTH. , #1113 ) ; +#486 = AXIS2_PLACEMENT_3D ( 'NONE', #951, #945, #924 ) ; +#487 = VECTOR ( 'NONE', #1117, 1000.000000000000000 ) ; +#488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#489 = LINE ( 'NONE', #1011, #484 ) ; +#490 = LINE ( 'NONE', #118, #487 ) ; +#491 = ADVANCED_FACE ( 'NONE', ( #638 ), #393, .T. ) ; +#492 = FACE_OUTER_BOUND ( 'NONE', #946, .T. ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267424200, 26.31215327778010500, 2.650000000000012300 ) ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711751800, -31.75000000000000000, 6.349999999999994300 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 1.120357174270431200, -31.73039890982656900, -13.93014659563096900 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 0.9977700148695930500, -30.01128321379775700, 2.650000000000012300 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, 12.69999999999999900 ) ) ; +#499 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #1077, #757 ) ; +#500 = CARTESIAN_POINT ( 'NONE', ( 1.103502790660048100, -31.73098752656059000, -16.75225508513715400 ) ) ; +#501 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#502 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#503 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #168 ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 7.775344845879507400, -30.78952425465927000, -18.90057769304275900 ) ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -129.5477436145402200 ) ) ; +#506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#507 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .T. ) ; +#508 = EDGE_CURVE ( 'NONE', #422, #422, #566, .T. ) ; +#509 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#510 = VERTEX_POINT ( 'NONE', #1040 ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761003200, -29.34758967582914800, -15.35263997314826800 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117395215600, 31.74666501544408300, -15.35930625775303700 ) ) ; +#513 = PRESENTATION_STYLE_ASSIGNMENT (( #485 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 4.424094690961311500, 31.44173193995246500, -18.52512291106802400 ) ) ; +#515 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #684, #895, #1004, #399 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#516 = CIRCLE ( 'NONE', #997, 6.350000000000001400 ) ; +#517 = SURFACE_STYLE_FILL_AREA ( #401 ) ; +#518 = CYLINDRICAL_SURFACE ( 'NONE', #922, 3.549999999999997200 ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 11.12745921843176500, 29.73727405356243400, -17.57403750360762700 ) ) ; +#520 = COLOUR_RGB ( '',0.9960784313725490300, 0.8705882352941176600, 0.7607843137254901600 ) ; +#521 = ORIENTED_EDGE ( 'NONE', *, *, #742, .T. ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ; +#523 = DIRECTION ( 'NONE', ( 0.4226182617407036000, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#524 = AXIS2_PLACEMENT_3D ( 'NONE', #1056, #429, #3 ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( 12.00648722460431000, 29.39234438777736400, -14.55562697805280700 ) ) ; +#526 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, -25.39999999999999900 ) ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732305000, -22.83001686389457800, -12.69999999999999900 ) ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( 8.075071655707375800, 30.70753424645404600, -11.84668638566808400 ) ) ; +#529 = EDGE_CURVE ( 'NONE', #418, #418, #620, .T. ) ; +#530 = FACE_OUTER_BOUND ( 'NONE', #1029, .T. ) ; +#531 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#532 = FACE_OUTER_BOUND ( 'NONE', #1051, .T. ) ; +#533 = CIRCLE ( 'NONE', #852, 25.39999999999999900 ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 9.851566914790604200, -30.18426563881319400, 5.698334544645890200 ) ) ; +#535 = CIRCLE ( 'NONE', #248, 6.350000000000001400 ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 1.571574496192437600, 31.71195589071203400, -13.51604406090286800 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732304100, -22.83001686389457800, -12.69999999999999900 ) ) ; +#538 = VECTOR ( 'NONE', #571, 1000.000000000000000 ) ; +#539 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ; +#540 = FACE_OUTER_BOUND ( 'NONE', #1033, .T. ) ; +#541 = LINE ( 'NONE', #994, #538 ) ; +#542 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 2.664858760312403900, 31.63928879694268700, 0.1428123358144610400 ) ) ; +#544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 9.573447994677813700, 30.27381285881857700, -0.5082114033233233700 ) ) ; +#546 = CYLINDRICAL_SURFACE ( 'NONE', #713, 6.350000000000001400 ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( 10.39029207903775500, -30.00308473046265300, 5.424990061247894100 ) ) ; +#548 = FACE_BOUND ( 'NONE', #65, .T. ) ; +#549 = AXIS2_PLACEMENT_3D ( 'NONE', #956, #637, #631 ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 12.11598702784926700, 29.34732285689538500, 2.503140229915999700 ) ) ; +#551 = CYLINDRICAL_SURFACE ( 'NONE', #644, 20.32000000000000000 ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711754500, -31.75000000000000000, -19.04999999999999700 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 3.219220683782265400, -31.58769117358796300, -0.1111560800836185900 ) ) ; +#554 = CIRCLE ( 'NONE', #293, 6.350000000000001400 ) ; +#555 = VECTOR ( 'NONE', #245, 1000.000000000000000 ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( 10.64915402328838000, -29.91190604359954700, 5.261606721795137000 ) ) ; +#557 = LINE ( 'NONE', #779, #555 ) ; +#558 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 9.840002897518493400, 30.18804261305030000, 5.703314666139605500 ) ) ; +#560 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#561 = VECTOR ( 'NONE', #772, 1000.000000000000000 ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 6.349999999999994300 ) ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 11.12483141320866200, -29.73827047090216900, 4.876695873816289300 ) ) ; +#564 = CARTESIAN_POINT ( 'NONE', ( 3.218127938864547000, 31.58778329841339200, 5.410609888894542000 ) ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711753600, -31.75000000000000000, -22.76974387893084600 ) ) ; +#566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #512, #618, #69, #623, #145, #726, #215, #829, #284, #937, #349, #1043, #417, #1147, #514, #72, #628, #147, #728, #218, #834, #286, #939, #353, #1049, #419, #1149, #519, #75, #630, #152, #734, #220, #840, #288, #944, #355, #1053, #427, #1, #525, #79, #636, #154, #738, #222, #843, #291, #950, #359, #1057, #433, #5, #528, #83, #641, #157, #740, #225, #850, #294, #955, #363, #1061, #437, #8, #536, #86, #645, #159, #746, #227, #857, #297, #960, #368 ), + .UNSPECIFIED., .T., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004812807532736512500, 0.0009625615065473024900, 0.001925123013094604500, 0.002887684519641906500, 0.003850246026189208700, 0.004812807532736510800, 0.005775369039283811300, 0.006737930545831111700, 0.007700492052378413000, 0.009625615065473014700, 0.01058817657202031600, 0.01155073807856761900, 0.01251329958511492200, 0.01347586109166222300, 0.01395714184493587900, 0.01443842259820953300, 0.01491970335148318900, 0.01540098410475684300, 0.01588226485803049700, 0.01636354561130415000, 0.01684482636457780900, 0.01732610711785146200, 0.01828866862439877300, 0.01925123013094608800, 0.02021379163749339700, 0.02117635314404071200, 0.02213891465058802400, 0.02310147615713533900, 0.02502659917022996200, 0.02598916067677727400, 0.02695172218332459200, 0.02791428368987190800, 0.02887684519641922300, 0.02935812594969287900, 0.02983940670296653100, 0.03032068745624019000, 0.03080196820951384300 ), + .UNSPECIFIED. ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 2.645089632831131100, -31.64094050945937700, 0.1527610843435561500 ) ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117394872500, 31.74666501544409100, 2.640693742246996000 ) ) ; +#570 = FACE_OUTER_BOUND ( 'NONE', #1115, .T. ) ; +#571 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#572 = VECTOR ( 'NONE', #661, 1000.000000000000000 ) ; +#573 = FACE_OUTER_BOUND ( 'NONE', #1091, .T. ) ; +#574 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #97, #454 ) ; +#575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#576 = CYLINDRICAL_SURFACE ( 'NONE', #574, 3.549999999999997200 ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 10.80042984328229700, -32.65142720389066300, -15.34999999999998500 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 2.365377599669054900, -31.66292073036938600, 0.2996459472979087200 ) ) ; +#579 = LINE ( 'NONE', #1088, #561 ) ; +#580 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 10.64915402328834500, -29.91190604359957900, -12.73839327820481600 ) ) ; +#582 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915817100, -28.42524458648363600, -15.34999999999998500 ) ) ; +#583 = VERTEX_POINT ( 'NONE', #1143 ) ; +#584 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #138, #146 ) ; +#585 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, 12.69999999999999900 ) ) ; +#586 = CYLINDRICAL_SURFACE ( 'NONE', #499, 1.750000000000002200 ) ; +#587 = LINE ( 'NONE', #1072, #572 ) ; +#588 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#589 = PRODUCT ( 'Trellais_Clamp_2', 'Trellais_Clamp_2', '', ( #614 ) ) ; +#590 = VECTOR ( 'NONE', #102, 1000.000000000000000 ) ; +#591 = FACE_OUTER_BOUND ( 'NONE', #1048, .T. ) ; +#592 = LINE ( 'NONE', #562, #590 ) ; +#593 = CYLINDRICAL_SURFACE ( 'NONE', #436, 3.550000000000001600 ) ; +#594 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ; +#595 = ADVANCED_FACE ( 'NONE', ( #642 ), #611, .T. ) ; +#596 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 6.349999999999994300 ) ) ; +#598 = AXIS2_PLACEMENT_3D ( 'NONE', #1050, #629, #77 ) ; +#599 = ADVANCED_FACE ( 'NONE', ( #619, #610 ), #605, .F. ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 7.169929826637742900, -30.93145250818383100, -11.79457179125098400 ) ) ; +#601 = VECTOR ( 'NONE', #376, 1000.000000000000000 ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711751800, -31.75000000000000000, 6.349999999999994300 ) ) ; +#603 = FACE_OUTER_BOUND ( 'NONE', #993, .T. ) ; +#604 = LINE ( 'NONE', #972, #601 ) ; +#605 = CYLINDRICAL_SURFACE ( 'NONE', #392, 1.750000000000002200 ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 0.8149384332303862800, -31.73964492980386300, -14.29876277671904800 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 3.237646802095312200, -25.20785194250354200, 2.650000000000012300 ) ) ; +#608 = FACE_OUTER_BOUND ( 'NONE', #999, .T. ) ; +#609 = EDGE_CURVE ( 'NONE', #432, #510, #622, .T. ) ; +#610 = FACE_OUTER_BOUND ( 'NONE', #1107, .T. ) ; +#611 = CYLINDRICAL_SURFACE ( 'NONE', #338, 6.350000000000001400 ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( 1.567328356806368700, -31.71216151684939200, -17.18063441882974000 ) ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 8.976775898401326600, -30.45608245958471400, -18.69158673619364200 ) ) ; +#614 = PRODUCT_CONTEXT ( 'NONE', #208, 'mechanical' ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 10.64303114812064200, -29.91408310409825300, 0.03426332013518942900 ) ) ; +#616 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #262, #123 ) ; +#617 = FACE_OUTER_BOUND ( 'NONE', #1064, .T. ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( 0.4611409172610886300, 31.74665100430210900, -15.51997959313258900 ) ) ; +#619 = FACE_OUTER_BOUND ( 'NONE', #1046, .T. ) ; +#620 = CIRCLE ( 'NONE', #156, 1.749999999999994900 ) ; +#621 = VECTOR ( 'NONE', #654, 1000.000000000000000 ) ; +#622 = LINE ( 'NONE', #94, #621 ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 0.5820217315976440300, 31.74469993044860800, -15.98149223968621500 ) ) ; +#624 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #683, #182, #785, #252, #891, #323, #998, #396, #1108, #478, #37, #581, #111, #686, #186, #790, #254, #894, #328, #600, #127, #708, #198, #807, #268, #916, #336, #1023, #409, #1129, #496, #52, #606, #132, #711, #201, #810, #273, #920, #340, #1025, #412, #1135, #500, #55, #612, #135, #714, #206, #817, #275, #923, #342, #1030, #413, #1139, #504, #59, #613, #140, #718, #210, #823, #279, #927, #347, #1037, #415, #1140, #511 ), + .UNSPECIFIED., .T., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004758279613680844300, 0.0009516559227361688700, 0.001427483884104253100, 0.001903311845472337700, 0.002854967768208508900, 0.003806623690944680200, 0.004758279613680851600, 0.005709935536417023000, 0.006661591459153194300, 0.007613247381889365700, 0.009516559227361710100, 0.01141987107283406000, 0.01237152699557023300, 0.01332318291830640300, 0.01379901087967448800, 0.01427483884104257200, 0.01475066680241065800, 0.01522649476377874200, 0.01570232272514682600, 0.01617815068651491000, 0.01665397864788299400, 0.01712980660925108100, 0.01808146253198724900, 0.01903311845472341700, 0.01998477437745958500, 0.02093643030019575300, 0.02283974214566809900, 0.02474305399114044200, 0.02569470991387661300, 0.02664636583661278400, 0.02759802175934895600, 0.02854967768208512700, 0.02950133360482130200, 0.03045298952755747000 ), + .UNSPECIFIED. ) ; +#625 = CIRCLE ( 'NONE', #1097, 1.750000000000006000 ) ; +#626 = AXIS2_PLACEMENT_3D ( 'NONE', #741, #739, #735 ) ; +#627 = VECTOR ( 'NONE', #575, 1000.000000000000000 ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 5.329470590665961200, 31.30105357400395900, -18.73416775160142900 ) ) ; +#629 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 11.61879209957258800, 29.54785784287334500, -16.97675673670890400 ) ) ; +#631 = DIRECTION ( 'NONE', ( 0.4226182617407037200, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, -12.69999999999999900 ) ) ; +#633 = LINE ( 'NONE', #34, #627 ) ; +#634 = FACE_OUTER_BOUND ( 'NONE', #1042, .T. ) ; +#635 = FACE_OUTER_BOUND ( 'NONE', #961, .T. ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 11.83943549642341800, 29.46008346187635500, -14.11461761489122700 ) ) ; +#637 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#638 = FACE_OUTER_BOUND ( 'NONE', #981, .T. ) ; +#639 = VECTOR ( 'NONE', #366, 1000.000000000000000 ) ; +#640 = CYLINDRICAL_SURFACE ( 'NONE', #1022, 22.85999999999999900 ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( 7.154394970276862300, 30.93505524544104900, -11.79450620935634200 ) ) ; +#642 = FACE_OUTER_BOUND ( 'NONE', #926, .T. ) ; +#643 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#644 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #984, #24 ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 1.106662307873041100, 31.73087771073228300, -13.94443350359653300 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 0.4611409172610505500, 31.74665100430211600, 2.480020406867440300 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( -2.794186962267424200, -26.31215327778010500, 2.650000000000012300 ) ) ; +#648 = LINE ( 'NONE', #958, #639 ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 3.534422674129760200, 31.55406535755830100, -0.2356429288345754900 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#651 = FACE_OUTER_BOUND ( 'NONE', #970, .T. ) ; +#652 = CIRCLE ( 'NONE', #947, 31.75000000000000000 ) ; +#653 = TOROIDAL_SURFACE ( 'NONE', #50, 25.39999999999999900, 6.349999999999999600 ) ; +#654 = DIRECTION ( 'NONE', ( -0.4226182617407036600, 0.9063077870366480500, 0.0000000000000000000 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 10.39374918792276500, 30.00189123341567700, -0.1229911341832172500 ) ) ; +#656 = VECTOR ( 'NONE', #153, 1000.000000000000000 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#658 = FACE_OUTER_BOUND ( 'NONE', #986, .T. ) ; +#659 = VECTOR ( 'NONE', #358, 1000.000000000000000 ) ; +#660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#661 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 12.10068248561222000, 29.35365101801784600, 2.977875290566724500 ) ) ; +#663 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 11.84410957537772200, -29.45820299407403900, 3.875408278829489000 ) ) ; +#665 = ADVANCED_FACE ( 'NONE', ( #603, #617 ), #593, .F. ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 8.972016402014869400, 30.45748550538777600, 5.992776412525971700 ) ) ; +#667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#668 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #87, #646, #228, #858, #299, #962, #369, #1070, #442, #12, #543, #91, #649, #164, #755, #232, #860, #304, #967, #374, #1074, #449, #15, #545, #95, #655, #167, #758, #236, #864, #307, #973, #378, #1079, #455, #20, #550, #98, #662, #170, #763, #238, #872, #311, #977, #381, #1085, #458, #23, #559, #101, #666, #174, #770, #241, #876, #314, #982, #383, #1093, #464, #26, #564, #104, #672, #176, #777, #243, #880, #318, #991, #388, #1098, #472, #31, #569 ), + .UNSPECIFIED., .T., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004812807532736567800, 0.0009625615065473135500, 0.001925123013094626700, 0.002887684519641939900, 0.003850246026189253300, 0.004812807532736566300, 0.005775369039283880700, 0.006737930545831193200, 0.007700492052378504900, 0.009625615065473132700, 0.01058817657202044600, 0.01155073807856775800, 0.01251329958511507000, 0.01347586109166238000, 0.01395714184493603900, 0.01443842259820969500, 0.01491970335148335200, 0.01540098410475700800, 0.01588226485803066700, 0.01636354561130432300, 0.01684482636457797900, 0.01732610711785163500, 0.01828866862439895000, 0.01925123013094626200, 0.02021379163749358100, 0.02117635314404089200, 0.02213891465058820400, 0.02310147615713551900, 0.02502659917023014300, 0.02598916067677745400, 0.02695172218332476600, 0.02791428368987208500, 0.02887684519641939600, 0.02935812594969305200, 0.02983940670296671100, 0.03032068745624036700, 0.03080196820951402000 ), + .UNSPECIFIED. ) ; +#669 = LINE ( 'NONE', #527, #656 ) ; +#670 = CIRCLE ( 'NONE', #671, 25.39999999999999900 ) ; +#671 = AXIS2_PLACEMENT_3D ( 'NONE', #953, #362, #1058 ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 2.369959339708425500, 31.66257204556407200, 5.002836556382238300 ) ) ; +#673 = CIRCLE ( 'NONE', #524, 6.350000000000001400 ) ; +#674 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( 0.4829179287894893000, -31.74635911747361000, 2.344100801763488600 ) ) ; +#676 = FACE_BOUND ( 'NONE', #1047, .T. ) ; +#677 = VECTOR ( 'NONE', #523, 1000.000000000000000 ) ; +#678 = LINE ( 'NONE', #290, #659 ) ; +#679 = PLANE ( 'NONE', #4 ) ; +#680 = LINE ( 'NONE', #632, #677 ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711644300, 31.75000000000000000, -19.04999999999999700 ) ) ; +#682 = EDGE_CURVE ( 'NONE', #941, #510, #604, .T. ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761003200, -29.34758967582914800, -15.35263997314826800 ) ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711644300, 31.75000000000000000, -19.04999999999999700 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 0.4589626304464010700, -31.74668257967043400, 2.501080130444682600 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 9.851566914790566900, -30.18426563881321600, -12.30166545535407800 ) ) ; +#687 = FACE_OUTER_BOUND ( 'NONE', #948, .T. ) ; +#688 = DIRECTION ( 'NONE', ( 0.4226182617407037200, 0.9063077870366479400, 0.0000000000000000000 ) ) ; +#689 = FACE_BOUND ( 'NONE', #898, .T. ) ; +#690 = FACE_OUTER_BOUND ( 'NONE', #1002, .T. ) ; +#691 = AXIS2_PLACEMENT_3D ( 'NONE', #911, #196, #265 ) ; +#692 = VECTOR ( 'NONE', #1083, 1000.000000000000000 ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -19.04999999999999700 ) ) ; +#694 = CYLINDRICAL_SURFACE ( 'NONE', #263, 20.32000000000000000 ) ; +#695 = FACE_BOUND ( 'NONE', #928, .T. ) ; +#696 = FACE_OUTER_BOUND ( 'NONE', #1060, .T. ) ; +#697 = AXIS2_PLACEMENT_3D ( 'NONE', #428, #343, #226 ) ; +#698 = ADVANCED_FACE ( 'NONE', ( #591, #608 ), #586, .F. ) ; +#699 = LINE ( 'NONE', #17, #692 ) ; +#700 = CIRCLE ( 'NONE', #73, 3.550000000000001600 ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 26.20766222290532000, 39.83593765348263100, 2.650000000000012300 ) ) ; +#702 = CIRCLE ( 'NONE', #173, 31.75000000000000000 ) ; +#703 = ADVANCED_FACE ( 'NONE', ( #596, #580 ), #576, .F. ) ; +#704 = EDGE_CURVE ( 'NONE', #896, #1116, #592, .T. ) ; +#705 = FACE_OUTER_BOUND ( 'NONE', #952, .T. ) ; +#706 = FACE_BOUND ( 'NONE', #943, .T. ) ; +#707 = VECTOR ( 'NONE', #155, 1000.000000000000000 ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 5.938096988076655000, -31.19608495055511500, -11.85649639113607500 ) ) ; +#709 = FACE_OUTER_BOUND ( 'NONE', #965, .T. ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( 0.5830345411827868600, -31.74468224139581500, -14.71568618987521200 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 0.4601743117393047900, 31.74666501544398800, 2.640693742246973400 ) ) ; +#713 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #466, #316 ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 2.365377599669142800, -31.66292073036940000, -17.70035405270212400 ) ) ; +#715 = CIRCLE ( 'NONE', #1045, 1.749999999999994900 ) ; +#716 = CIRCLE ( 'NONE', #831, 1.750000000000006200 ) ; +#717 = CYLINDRICAL_SURFACE ( 'NONE', #976, 1.749999999999994400 ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 9.841605257036542700, -30.18752146737484300, -18.40264170226950200 ) ) ; +#719 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #141 ) ; +#720 = CIRCLE ( 'NONE', #907, 1.749999999999994900 ) ; +#721 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #54, #57 ) ; +#722 = FACE_OUTER_BOUND ( 'NONE', #1028, .T. ) ; +#723 = CIRCLE ( 'NONE', #1121, 3.550000000000001600 ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#725 = CIRCLE ( 'NONE', #626, 3.550000000000001600 ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 0.8958816961219352400, 31.73777957432366000, -16.53619720747526900 ) ) ; +#727 = CYLINDRICAL_SURFACE ( 'NONE', #761, 3.550000000000001600 ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 6.251601224183867000, 31.13004985657348900, -18.86332922476517000 ) ) ; +#729 = CIRCLE ( 'NONE', #486, 3.550000000000001600 ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.349999999999999600 ) ) ; +#731 = FACE_OUTER_BOUND ( 'NONE', #1134, .T. ) ; +#732 = CYLINDRICAL_SURFACE ( 'NONE', #697, 6.350000000000001400 ) ; +#733 = FACE_OUTER_BOUND ( 'NONE', #1052, .T. ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 11.84718780885249200, 29.45696508383066000, -16.56886818785045500 ) ) ; +#735 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#736 = FACE_OUTER_BOUND ( 'NONE', #1034, .T. ) ; +#737 = LINE ( 'NONE', #526, #707 ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 11.60810739854112400, 29.55205871270012400, -13.70723337746345300 ) ) ; +#739 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 5.922983368040887000, 31.19895616901826700, -11.85842366450716200 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915813800, 28.42524458648364300, 2.650000000000012300 ) ) ; +#742 = EDGE_CURVE ( 'NONE', #941, #851, #587, .T. ) ; +#743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#744 = FACE_OUTER_BOUND ( 'NONE', #1133, .T. ) ; +#745 = FACE_BOUND ( 'NONE', #389, .T. ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( 0.8033993325315850200, 31.73993610697547400, -14.31542530379213000 ) ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.05000000000000100 ) ) ; +#748 = VECTOR ( 'NONE', #289, 1000.000000000000000 ) ; +#749 = CIRCLE ( 'NONE', #377, 1.749999999999994900 ) ; +#750 = LINE ( 'NONE', #505, #748 ) ; +#751 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#752 = DIRECTION ( 'NONE', ( 0.4226182617407038800, 0.9063077870366478300, 0.0000000000000000000 ) ) ; +#753 = FACE_BOUND ( 'NONE', #931, .T. ) ; +#754 = CLOSED_SHELL ( 'NONE', ( #74, #261, #194, #44, #595, #406, #1124, #331, #197, #491, #51, #335, #797, #204, #1014, #131, #804, #402, #599, #1118, #134, #122, #665, #266, #698, #150, #909, #936, #703, #41 ) ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 4.424094690961252000, 31.44173193995249000, -0.5251229110680282200 ) ) ; +#756 = LINE ( 'NONE', #162, #766 ) ; +#757 = DIRECTION ( 'NONE', ( -0.4226182617407035500, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 11.12745921843171500, 29.73727405356244800, 0.4259624963923380700 ) ) ; +#759 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( 11.90674743281622300, -29.43288886053348800, 3.732299587346756800 ) ) ; +#761 = AXIS2_PLACEMENT_3D ( 'NONE', #158, #1150, #1062 ) ; +#762 = CIRCLE ( 'NONE', #330, 1.750000000000006000 ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 12.00648722460429400, 29.39234438777734600, 3.444373021947149600 ) ) ; +#764 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #959, #1076, #875, #856, #768, #760, #664, #988, #980, #877, #563, #556, #547, #534, #470, #461, #456, #453, #386, #382, #380, #375, #367, #317, #296, #240, #237, #189, #172, #169, #103, #99, #96, #29, #22, #1095, #985, #685, #675, #385, #246, #395, #1103, #996, #883, #783, #780, #578, #567, #553, #467, #322, #251, #181, #177, #106, #66, #839, #452, #372, #424, #78, #615, #855, #1041, #128, #465, #285, #938, #350 ), + .UNSPECIFIED., .T., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004758279613680854100, 0.0009516559227361708200, 0.001427483884104256200, 0.001903311845472342500, 0.002854967768208517600, 0.003806623690944692800, 0.004758279613680868100, 0.005709935536417042000, 0.006661591459153217700, 0.007613247381889393400, 0.009516559227361743100, 0.01141987107283408900, 0.01237152699557026400, 0.01332318291830643500, 0.01379901087967452100, 0.01427483884104260700, 0.01475066680241069100, 0.01522649476377877800, 0.01570232272514686400, 0.01617815068651494800, 0.01665397864788303500, 0.01712980660925111900, 0.01808146253198729100, 0.01903311845472346500, 0.01998477437745963700, 0.02093643030019581200, 0.02283974214566815400, 0.02474305399114049700, 0.02569470991387666500, 0.02664636583661282900, 0.02759802175934899700, 0.02854967768208516900, 0.02950133360482133300, 0.03045298952755750100 ), + .UNSPECIFIED. ) ; +#766 = VECTOR ( 'NONE', #239, 1000.000000000000000 ) ; +#767 = VECTOR ( 'NONE', #13, 1000.000000000000000 ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 12.00958785360825100, -29.39107654870535700, 3.433608027898579000 ) ) ; +#769 = FACE_OUTER_BOUND ( 'NONE', #1152, .T. ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 8.075071655707384700, 30.70753424645404200, 6.153313614331908700 ) ) ; +#771 = VECTOR ( 'NONE', #370, 1000.000000000000000 ) ; +#772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#773 = CIRCLE ( 'NONE', #283, 1.750000000000006000 ) ; +#774 = CYLINDRICAL_SURFACE ( 'NONE', #188, 31.75000000000000000 ) ; +#775 = EDGE_CURVE ( 'NONE', #906, #1017, #579, .T. ) ; +#776 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 1.571574496192432100, 31.71195589071206600, 4.483955939097156400 ) ) ; +#778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -25.39999999999999900 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 1.825962864958368800, -31.69860280804920900, 0.6333348292099960600 ) ) ; +#781 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 6.349999999999994300 ) ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( 1.567328356806289700, -31.71216151684937800, 0.8193655811703050000 ) ) ; +#784 = LINE ( 'NONE', #315, #771 ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 12.10204842964557800, -29.35308731633847000, -15.03384010796688700 ) ) ; +#786 = LINE ( 'NONE', #319, #767 ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, -25.39999999999999900 ) ) ; +#788 = CIRCLE ( 'NONE', #144, 20.32000000000000000 ) ; +#789 = FACE_BOUND ( 'NONE', #881, .T. ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 8.984906353542136500, -30.45368452731086300, -12.01045075418980400 ) ) ; +#791 = FACE_BOUND ( 'NONE', #913, .T. ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427368400, 25.39999999999999900, -25.39999999999999900 ) ) ; +#793 = FACE_OUTER_BOUND ( 'NONE', #918, .T. ) ; +#794 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #143, #129 ) ; +#795 = FACE_BOUND ( 'NONE', #915, .T. ) ; +#796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#797 = ADVANCED_FACE ( 'NONE', ( #573 ), #551, .F. ) ; +#798 = CIRCLE ( 'NONE', #39, 20.32000000000000000 ) ; +#799 = FACE_BOUND ( 'NONE', #871, .T. ) ; +#800 = LINE ( 'NONE', #124, #812 ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427361300, 25.39999999999999900, 12.69999999999999900 ) ) ; +#802 = FACE_OUTER_BOUND ( 'NONE', #979, .T. ) ; +#803 = CIRCLE ( 'NONE', #1141, 22.85999999999999900 ) ; +#804 = ADVANCED_FACE ( 'NONE', ( #570 ), #546, .T. ) ; +#805 = VECTOR ( 'NONE', #1080, 1000.000000000000000 ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 2.476933930962052200, 26.83920595916949700, 2.650000000000012300 ) ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 4.121906577499272500, -31.48722103580314900, -12.24919840848930800 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( -2.054605004221188700, 24.72611465046595900, -15.34999999999998500 ) ) ; +#809 = LINE ( 'NONE', #1087, #805 ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 0.4614204169467367400, -31.74664695222663400, -15.17742784389943500 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( -2.054605004221188700, -24.72611465046595900, -15.34999999999998500 ) ) ; +#812 = VECTOR ( 'NONE', #978, 1000.000000000000000 ) ; +#813 = EDGE_CURVE ( 'NONE', #326, #851, #557, .T. ) ; +#814 = CIRCLE ( 'NONE', #1007, 22.85999999999999900 ) ; +#815 = CIRCLE ( 'NONE', #721, 20.32000000000000000 ) ; +#816 = TOROIDAL_SURFACE ( 'NONE', #929, 25.39999999999999900, 6.349999999999999600 ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 3.219220683782352500, -31.58769117358796300, -18.11115608008364600 ) ) ; +#818 = DIRECTION ( 'NONE', ( 0.4226182617407038800, -0.9063077870366478300, 0.0000000000000000000 ) ) ; +#819 = FILL_AREA_STYLE ('',( #341 ) ) ; +#820 = FACE_OUTER_BOUND ( 'NONE', #930, .T. ) ; +#821 = FACE_BOUND ( 'NONE', #81, .T. ) ; +#822 = ORIENTED_EDGE ( 'NONE', *, *, #100, .T. ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 10.64303114812073000, -29.91408310409823600, -17.96573667986476500 ) ) ; +#824 = DIRECTION ( 'NONE', ( -0.9063077870366479400, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#825 = DIRECTION ( 'NONE', ( 0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#826 = VECTOR ( 'NONE', #199, 1000.000000000000000 ) ; +#827 = FACE_OUTER_BOUND ( 'NONE', #125, .T. ) ; +#828 = VECTOR ( 'NONE', #271, 1000.000000000000000 ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 1.585373159474361000, 31.71127349235603500, -17.19451764646584000 ) ) ; +#830 = LINE ( 'NONE', #257, #826 ) ; +#831 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #356, #295 ) ; +#832 = VECTOR ( 'NONE', #282, 1000.000000000000000 ) ; +#833 = LINE ( 'NONE', #278, #832 ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 7.790407834157703000, 30.78572278126060300, -18.89952046096475900 ) ) ; +#835 = CIRCLE ( 'NONE', #584, 20.32000000000000000 ) ; +#836 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ; +#837 = ORIENTED_EDGE ( 'NONE', *, *, #1055, .T. ) ; +#838 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( 8.676924846984256600, -30.54292959139538200, -0.7585380490426936200 ) ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( 12.01243708490330200, 29.38991118401568100, -16.12358151681863900 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915822400, 28.42524458648362900, 2.650000000000012300 ) ) ; +#842 = EDGE_CURVE ( 'NONE', #258, #910, #554, .T. ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( 11.11642573325252700, 29.74142249585803600, -13.11531330909819100 ) ) ; +#844 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#845 = VECTOR ( 'NONE', #502, 1000.000000000000000 ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -25.39999999999999900 ) ) ; +#847 = LINE ( 'NONE', #498, #845 ) ; +#848 = LINE ( 'NONE', #267, #828 ) ; +#849 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 4.407303979297383400, 31.44410176646608000, -12.17950003426720300 ) ) ; +#851 = VERTEX_POINT ( 'NONE', #882 ) ; +#852 = AXIS2_PLACEMENT_3D ( 'NONE', #397, #1110, #480 ) ; +#853 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ; +#854 = ORIENTED_EDGE ( 'NONE', *, *, #320, .T. ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 11.11828288544701800, -29.74071730234391400, 0.4172022994695635000 ) ) ; +#856 = CARTESIAN_POINT ( 'NONE', ( 12.04936637774200900, -29.37475244302523000, 3.278331750832057500 ) ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 0.5750625846680771400, 31.74482487433864000, -14.73522577457549500 ) ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( 0.5820217315975987300, 31.74469993044862200, 2.018507760313812000 ) ) ; +#859 = DIRECTION ( 'NONE', ( 0.4226182617407035500, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( 5.329470590665905200, 31.30105357400397300, -0.7341677516014237800 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#862 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ; +#863 = ORIENTED_EDGE ( 'NONE', *, *, #209, .F. ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 11.61879209957255600, 29.54785784287336300, 1.023243263291054200 ) ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #346, .T. ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -12.69999999999999900 ) ) ; +#867 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #552, #565, #444, #379 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#868 = VERTEX_POINT ( 'NONE', #32 ) ; +#869 = VERTEX_POINT ( 'NONE', #28 ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#871 = EDGE_LOOP ( 'NONE', ( #879 ) ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 11.83943549642341800, 29.46008346187634400, 3.885382385108733700 ) ) ; +#873 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ; +#874 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 12.10204842964556500, -29.35308731633847000, 2.966159892033028500 ) ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( 7.154394970276874800, 30.93505524544104900, 6.205493790643655100 ) ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 11.33851565305459300, -29.65703264838065700, 4.658644631458860100 ) ) ; +#878 = AXIS2_PLACEMENT_3D ( 'NONE', #82, #7, #531 ) ; +#879 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( 1.106662307873032400, 31.73087771073229700, 4.055566496403492300 ) ) ; +#881 = EDGE_LOOP ( 'NONE', ( #863 ) ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-014, 20.32000000000000000, -12.69999999999999900 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 1.215198764242136700, -31.72695373851045600, 1.135752748470077800 ) ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #398, .T. ) ; +#885 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#886 = EDGE_LOOP ( 'NONE', ( #107, #126, #192, #151 ) ) ; +#887 = ORIENTED_EDGE ( 'NONE', *, *, #298, .T. ) ; +#888 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ; +#890 = EDGE_CURVE ( 'NONE', #1009, #326, #541, .T. ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( 12.00958785360824300, -29.39107654870536000, -14.56639197210134100 ) ) ; +#892 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ; +#893 = VERTEX_POINT ( 'NONE', #681 ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 8.088942714868297300, -30.70387980804903800, -11.84829560679535000 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, -22.76974387893084600 ) ) ; +#896 = VERTEX_POINT ( 'NONE', #782 ) ; +#897 = STYLED_ITEM ( 'NONE', ( #407 ), #332 ) ; +#898 = EDGE_LOOP ( 'NONE', ( #990 ) ) ; +#899 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ; +#900 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ; +#901 = VERTEX_POINT ( 'NONE', #180 ) ; +#902 = EDGE_CURVE ( 'NONE', #1021, #904, #535, .T. ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ; +#904 = VERTEX_POINT ( 'NONE', #321 ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -25.39999999999999900 ) ) ; +#906 = VERTEX_POINT ( 'NONE', #250 ) ; +#907 = AXIS2_PLACEMENT_3D ( 'NONE', #494, #434, #420 ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548130500, -29.11974387893084400, 12.69999999999999200 ) ) ; +#909 = ADVANCED_FACE ( 'NONE', ( #532, #540 ), #518, .F. ) ; +#910 = VERTEX_POINT ( 'NONE', #183 ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -19.04999999999999700 ) ) ; +#912 = EDGE_CURVE ( 'NONE', #910, #906, #533, .T. ) ; +#913 = EDGE_LOOP ( 'NONE', ( #884 ) ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ; +#915 = EDGE_LOOP ( 'NONE', ( #903 ) ) ; +#916 = CARTESIAN_POINT ( 'NONE', ( 2.664458036868299700, -31.63929752874560800, -12.84313073377957300 ) ) ; +#917 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ; +#918 = EDGE_LOOP ( 'NONE', ( #889, #865, #887, #1067 ) ) ; +#919 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 0.4829179287895360400, -31.74635911747361000, -15.65589919823656300 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -2.054605004221194500, -24.72611465046597700, 2.650000000000012300 ) ) ; +#922 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #394, #109 ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 4.107311777513885400, -31.48462564084043100, -18.43234236034297500 ) ) ; +#924 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#925 = SURFACE_STYLE_USAGE ( .BOTH. , #276 ) ; +#926 = EDGE_LOOP ( 'NONE', ( #1035, #1142, #67, #19 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 11.33315891553543500, -29.65909125767419100, -17.36490098441483500 ) ) ; +#928 = EDGE_LOOP ( 'NONE', ( #983 ) ) ; +#929 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #63, #49 ) ; +#930 = EDGE_LOOP ( 'NONE', ( #971, #949, #1144, #1112 ) ) ; +#931 = EDGE_LOOP ( 'NONE', ( #1146 ) ) ; +#932 = VERTEX_POINT ( 'NONE', #787 ) ; +#933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#934 = VERTEX_POINT ( 'NONE', #38 ) ; +#935 = ORIENTED_EDGE ( 'NONE', *, *, #137, .F. ) ; +#936 = ADVANCED_FACE ( 'NONE', ( #548, #530 ), #325, .F. ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( 2.384498992532048800, 31.66149146496746200, -17.71092096150765700 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 12.11504101018853800, -29.34771339349233800, 2.326270566402338000 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 8.992849320831590300, 30.45132694334334300, -18.68747932284308900 ) ) ; +#940 = DIRECTION ( 'NONE', ( 0.9063077870366480500, 0.4226182617407036600, 0.0000000000000000000 ) ) ; +#941 = VERTEX_POINT ( 'NONE', #1000 ) ; +#942 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ; +#943 = EDGE_LOOP ( 'NONE', ( #1145 ) ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 12.10294203056935400, 29.35271844384024200, -15.65815542832345400 ) ) ; +#945 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, 0.0000000000000000000 ) ) ; +#946 = EDGE_LOOP ( 'NONE', ( #874, #64, #280, #301 ) ) ; +#947 = AXIS2_PLACEMENT_3D ( 'NONE', #1063, #438, #10 ) ; +#948 = EDGE_LOOP ( 'NONE', ( #1114, #1127, #1105, #1132, #1131, #391, #400, #339, #1008, #1128 ) ) ; +#949 = ORIENTED_EDGE ( 'NONE', *, *, #912, .F. ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 10.37983070971811600, 30.00671072057226100, -12.56885008984786500 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915817100, 28.42524458648363600, -15.34999999999998500 ) ) ; +#952 = EDGE_LOOP ( 'NONE', ( #471, #345, #247, #333 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 3.509887426912752700, 31.55682255268905200, -12.47356050914528100 ) ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915817100, 28.42524458648363600, -15.34999999999998500 ) ) ; +#957 = EDGE_CURVE ( 'NONE', #893, #1009, #515, .T. ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088831700, -3.629277885584810500, 0.0000000000000000000 ) ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( 12.11534069761001800, -29.34758967582917000, 2.647360026851645700 ) ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 0.4592077062179544800, 31.74667902658606500, -15.19863292237348400 ) ) ; +#961 = EDGE_LOOP ( 'NONE', ( #1001, #1005, #1068, #1101 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 0.8958816961218810700, 31.73777957432366000, 1.463802792524751000 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#964 = ORIENTED_EDGE ( 'NONE', *, *, #148, .T. ) ; +#965 = EDGE_LOOP ( 'NONE', ( #1089, #1086, #1100, #1082, #1044, #1038, #1071, #1018, #1013, #987 ) ) ; +#966 = VERTEX_POINT ( 'NONE', #585 ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 6.251601224183810100, 31.13004985657350300, -0.8633292247651687100 ) ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #398, .F. ) ; +#969 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #897 ) ) ; +#970 = EDGE_LOOP ( 'NONE', ( #113, #233, #235, #483 ) ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732198600, 22.83001686389458100, -12.69999999999999900 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 11.84718780885245200, 29.45696508383068100, 1.431131812149511600 ) ) ; +#974 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#975 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#976 = AXIS2_PLACEMENT_3D ( 'NONE', #1031, #824, #1054 ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 11.60810739854112600, 29.55205871270012400, 4.292766622536513300 ) ) ; +#978 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#979 = EDGE_LOOP ( 'NONE', ( #352, #521, #522, #539 ) ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 11.61462613580042800, -29.54949602626078700, 4.283013444136973800 ) ) ; +#981 = EDGE_LOOP ( 'NONE', ( #365, #416, #302, #493, #214, #305 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 5.922983368040895000, 31.19895616901827400, 6.141576335492835900 ) ) ; +#983 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ; +#984 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 0.4614204169467097700, -31.74664695222664800, 2.822572156100628500 ) ) ; +#986 = EDGE_LOOP ( 'NONE', ( #558, #594, #854, #710 ) ) ; +#987 = ORIENTED_EDGE ( 'NONE', *, *, #1055, .F. ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( 11.69838096882468600, -29.51637745357426100, 4.150348019139289400 ) ) ; +#989 = EDGE_CURVE ( 'NONE', #1116, #906, #516, .T. ) ; +#990 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 0.8033993325315705900, 31.73993610697546000, 3.684574696207900700 ) ) ; +#992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#993 = EDGE_LOOP ( 'NONE', ( #964 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, -25.39999999999999900 ) ) ; +#995 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 1.103502790659975900, -31.73098752656061100, 1.247744914862885600 ) ) ; +#997 = AXIS2_PLACEMENT_3D ( 'NONE', #256, #899, #329 ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 11.84410957537770800, -29.45820299407405000, -14.12459172117043900 ) ) ; +#999 = EDGE_LOOP ( 'NONE', ( #1109 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732199900, 22.83001686389458500, -12.69999999999999900 ) ) ; +#1001 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#1002 = EDGE_LOOP ( 'NONE', ( #1019 ) ) ; +#1003 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -4.103387960548023000, 29.11974387893084400, -25.40000000000000200 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #346, .F. ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ; +#1007 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #778, #764 ) ; +#1008 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ; +#1009 = VERTEX_POINT ( 'NONE', #792 ) ; +#1010 = FILL_AREA_STYLE_COLOUR ( '', #520 ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, -129.5477436145402200 ) ) ; +#1012 = MANIFOLD_SOLID_BREP ( 'Mirror1', #754 ) ; +#1013 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .F. ) ; +#1014 = ADVANCED_FACE ( 'NONE', ( #492 ), #187, .F. ) ; +#1015 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( -5.329896532711646100, 31.75000000000000000, 10.06974387893084400 ) ) ; +#1017 = VERTEX_POINT ( 'NONE', #255 ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#1019 = ORIENTED_EDGE ( 'NONE', *, *, #148, .F. ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( -2.368842903427476700, -25.39999999999999900, 12.69999999999999900 ) ) ; +#1021 = VERTEX_POINT ( 'NONE', #905 ) ; +#1022 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #743, #643 ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 1.848031147536270700, -31.69731839217868700, -13.31833858683409800 ) ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 3.237646802095312200, 25.20785194250354200, 2.650000000000012300 ) ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( 0.6400011675531467300, -31.74365093621477000, -16.10691326718275800 ) ) ; +#1026 = EDGE_CURVE ( 'NONE', #893, #896, #489, .T. ) ; +#1027 = VERTEX_POINT ( 'NONE', #693 ) ; +#1028 = EDGE_LOOP ( 'NONE', ( #1120 ) ) ; +#1029 = EDGE_LOOP ( 'NONE', ( #1006 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 5.309833927355091600, -31.30877159937475800, -18.74412907789221800 ) ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 26.20766222290532000, -39.83593765348263100, 2.650000000000012300 ) ) ; +#1032 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1033 = EDGE_LOOP ( 'NONE', ( #1003 ) ) ; +#1034 = EDGE_LOOP ( 'NONE', ( #1094, #507, #334, #270 ) ) ; +#1035 = ORIENTED_EDGE ( 'NONE', *, *, #1106, .F. ) ; +#1036 = ORIENTED_EDGE ( 'NONE', *, *, #912, .T. ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( 11.85289532046175200, -29.45477878938011400, -16.58747886428977100 ) ) ; +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #178, .F. ) ; +#1039 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #897 ), #1111 ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( -1.170440085732198600, 22.83001686389458500, 0.0000000000000000000 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( 11.33315891553536400, -29.65909125767422000, 0.6350990155851026200 ) ) ; +#1042 = EDGE_LOOP ( 'NONE', ( #509, #849, #853, #862 ) ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 3.240515053037331200, 31.58552089137987200, -18.12001964101887500 ) ) ; +#1044 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ; +#1045 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #221, #207 ) ; +#1046 = EDGE_LOOP ( 'NONE', ( #873 ) ) ; +#1047 = EDGE_LOOP ( 'NONE', ( #1066 ) ) ; +#1048 = EDGE_LOOP ( 'NONE', ( #1081 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 9.854252902086122000, 30.18339277657295500, -18.39721374684984700 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 1.737351972915813800, 28.42524458648364300, 2.650000000000012300 ) ) ; +#1051 = EDGE_LOOP ( 'NONE', ( #1138 ) ) ; +#1052 = EDGE_LOOP ( 'NONE', ( #1123 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 12.11464643598195500, 29.34787628188820800, -15.17926193665362800 ) ) ; +#1054 = DIRECTION ( 'NONE', ( -0.4226182617407034900, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1055 = EDGE_CURVE ( 'NONE', #966, #869, #490, .T. ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, -19.04999999999999700 ) ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 9.555401029611427800, 30.27952794863604100, -12.18515429832688000 ) ) ; +#1058 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1059 = VERTEX_POINT ( 'NONE', #42 ) ; +#1060 = EDGE_LOOP ( 'NONE', ( #751, #954, #837, #822, #1036, #217 ) ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( 2.648208156011651500, 31.64066046562332700, -12.85128383697031000 ) ) ; +#1062 = DIRECTION ( 'NONE', ( 0.4226182617407036600, -0.9063077870366479400, 0.0000000000000000000 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.05000000000000100 ) ) ; +#1064 = EDGE_LOOP ( 'NONE', ( #968 ) ) ; +#1065 = AXIS2_PLACEMENT_3D ( 'NONE', #582, #112, #688 ) ; +#1066 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ; +#1067 = ORIENTED_EDGE ( 'NONE', *, *, #253, .T. ) ; +#1068 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ; +#1069 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 1.585373159474303900, 31.71127349235603500, 0.8054823535341773000 ) ) ; +#1071 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 7.783011542088920500, 3.629277885584853100, -12.69999999999999900 ) ) ; +#1073 = AXIS2_PLACEMENT_3D ( 'NONE', #866, #992, #974 ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 7.790407834157647000, 30.78572278126059900, -0.8995204609647605700 ) ) ; +#1075 = PLANE ( 'NONE', #1073 ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 12.11549054132075700, -29.34752781699759100, 2.807904757076299600 ) ) ; +#1077 = DIRECTION ( 'NONE', ( -0.9063077870366479400, 0.4226182617407037700, 0.0000000000000000000 ) ) ; +#1078 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( 12.01243708490327900, 29.38991118401569800, 1.876418483181318700 ) ) ; +#1080 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1081 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ; +#1083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1084 = VERTEX_POINT ( 'NONE', #193 ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 11.11642573325252800, 29.74142249585799600, 4.884686690901782300 ) ) ; +#1086 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ; +#1091 = EDGE_LOOP ( 'NONE', ( #888, #892, #776, #836 ) ) ; +#1092 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( 4.407303979297392300, 31.44410176646608000, 5.820499965732800300 ) ) ; +#1094 = ORIENTED_EDGE ( 'NONE', *, *, #100, .F. ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 0.4875518653748489600, -31.74629227267290000, 2.978990164986588900 ) ) ; +#1096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1097 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #825, #281 ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 0.5750625846680562600, 31.74482487433864000, 3.264774225424528400 ) ) ; +#1099 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1100 = ORIENTED_EDGE ( 'NONE', *, *, #320, .F. ) ; +#1101 = ORIENTED_EDGE ( 'NONE', *, *, #324, .F. ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -19.04999999999999700 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 0.8958769267903563500, -31.73752813865288000, 1.489802592976693800 ) ) ; +#1104 = EDGE_LOOP ( 'NONE', ( #900 ) ) ; +#1105 = ORIENTED_EDGE ( 'NONE', *, *, #1106, .T. ) ; +#1106 = EDGE_CURVE ( 'NONE', #1017, #896, #421, .T. ) ; +#1107 = EDGE_LOOP ( 'NONE', ( #885 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 11.61462613580040000, -29.54949602626079800, -13.71698655586296500 ) ) ; +#1109 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ; +#1110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1111 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #264 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #344, #1032, #414 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1112 = ORIENTED_EDGE ( 'NONE', *, *, #253, .F. ) ; +#1113 = SURFACE_SIDE_STYLE ('',( #517 ) ) ; +#1114 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ; +#1115 = EDGE_LOOP ( 'NONE', ( #1069, #351, #1090, #1122 ) ) ; +#1116 = VERTEX_POINT ( 'NONE', #597 ) ; +#1117 = DIRECTION ( 'NONE', ( -0.4226182617407036000, -0.9063077870366480500, 0.0000000000000000000 ) ) ; +#1118 = ADVANCED_FACE ( 'NONE', ( #482, #481 ), #468, .F. ) ; +#1119 = EDGE_LOOP ( 'NONE', ( #914 ) ) ; +#1120 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ; +#1121 = AXIS2_PLACEMENT_3D ( 'NONE', #76, #60, #47 ) ; +#1122 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ; +#1123 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#1124 = ADVANCED_FACE ( 'NONE', ( #479 ), #462, .T. ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 2.476933930962056200, 26.83920595916948000, -15.34999999999998500 ) ) ; +#1126 = EDGE_CURVE ( 'NONE', #869, #1137, #403, .T. ) ; +#1127 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#1128 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 1.232678197684737000, -31.72628212894836600, -13.81892626879553500 ) ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 0.9977700148695882700, -30.01128321379776100, -15.34999999999998500 ) ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #957, .T. ) ; +#1132 = ORIENTED_EDGE ( 'NONE', *, *, #1026, .F. ) ; +#1133 = EDGE_LOOP ( 'NONE', ( #917 ) ) ; +#1134 = EDGE_LOOP ( 'NONE', ( #919 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 0.8958769267904243000, -31.73752813865288000, -16.51019740702334800 ) ) ; +#1136 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1137 = VERTEX_POINT ( 'NONE', #495 ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 7.162684163109641800, -30.93801932579326000, -18.92055766297446000 ) ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 12.11504101018856300, -29.34771339349231000, -15.67372943359757500 ) ) ; +#1141 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #667, #674 ) ; +#1142 = ORIENTED_EDGE ( 'NONE', *, *, #775, .F. ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( -5.551115123125782700E-014, -20.32000000000000000, -12.69999999999999900 ) ) ; +#1144 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ; +#1145 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ; +#1146 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 4.125671188300240800, 31.48221754378957700, -18.43798898536390500 ) ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, 6.349999999999994300 ) ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 10.65473741270304900, 29.90990450437590900, -17.95761156474939600 ) ) ; +#1150 = DIRECTION ( 'NONE', ( -0.9063077870366480500, -0.4226182617407037700, -0.0000000000000000000 ) ) ; +#1151 = PLANE ( 'NONE', #598 ) ; +#1152 = EDGE_LOOP ( 'NONE', ( #935 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_3.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_3.step new file mode 100644 index 0000000..6de9efb --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_3.step @@ -0,0 +1,1305 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Clamp_3.step', + '2016-04-19T10:44:32', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -129.5477436145402200 ) ) ; +#2 = ADVANCED_FACE ( 'NONE', ( #838, #1108 ), #351, .F. ) ; +#3 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #183, #404 ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( -51.01956288958491800, -31.74959513100195700, 5.675449039395966900 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( -50.95531710975498600, 31.74978340451971400, -16.42825260475876400 ) ) ; +#6 = EDGE_CURVE ( 'NONE', #1072, #840, #834, .T. ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( -58.42920177356774800, 30.82170681265077100, -13.83917026220112400 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( -61.38414975900700900, 29.89920346910831100, -19.71655147031616200 ) ) ; +#9 = EDGE_CURVE ( 'NONE', #854, #1009, #837, .T. ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( -62.23570762911545300, 29.61913999858467200, -15.95122207385980500 ) ) ; +#11 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #637 ), #67 ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216542100, 29.69386953851229500, -19.04999999999980900 ) ) ; +#13 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ; +#14 = DIRECTION ( 'NONE', ( 0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#15 = EDGE_CURVE ( 'NONE', #496, #1171, #832, .T. ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( -59.24328315985185600, -30.39350614523565100, -20.65658531384197600 ) ) ; +#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #497, #480 ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( -52.44560281338212300, -31.68840681690127100, -19.62311580932302100 ) ) ; +#20 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#21 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#22 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1123, #31, #702, #195, #808, #265, #919, #345, #1020, #421, #1128, #512, #34, #605, #124, #706, #197, #812, #268, #921, #349, #1026, #426, #1129, #517, #36, #607, #127, #713, #199, #814, #271, #928, #352, #1032, #432, #1134, #520, #40, #611 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.0005197816573414591300, 0.001039563314682916500, 0.001559344972024379400, 0.002079126629365842600, 0.002598908286707305500, 0.003118689944048769300, 0.004158253258731698200, 0.004678034916073161100, 0.005197816573414625700, 0.006237379888097553300, 0.007276943202780480900, 0.008316506517463408500, 0.01039563314682926000, 0.01247475977619511200, 0.01351432309087803800, 0.01455388640556096400, 0.01559344972024388900, 0.01611323137758534400, 0.01663301303492680000 ), + .UNSPECIFIED. ) ; +#23 = FILL_AREA_STYLE ('',( #1115 ) ) ; +#24 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25 = EDGE_CURVE ( 'NONE', #1057, #1072, #836, .T. ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, 12.69999999999999900 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#28 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( -53.27921389591127600, -31.57208167949693200, 7.368683648488399700 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #854, #1056, #889, .T. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( -62.13931238188666100, 29.65626039870220200, 6.210536667339769500 ) ) ; +#32 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #1031, #280 ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( -60.14292787891156400, -30.19938477824297600, 7.691814801051519300 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( -62.38435634472433800, 29.56131896598747500, 3.558884731093658000 ) ) ; +#35 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #959, 'distance_accuracy_value', 'NONE'); +#36 = CARTESIAN_POINT ( 'NONE', ( -57.42726315677198600, 31.05821946835227000, 1.075038543207965000 ) ) ; +#37 = EDGE_CURVE ( 'NONE', #806, #259, #824, .T. ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( -53.71444247154829600, 31.50065935010680500, 7.559879976178824500 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, 31.75000000000000700, 10.06974387893084400 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( -50.86721797984216000, 31.74999999999999300, 3.877179742653767300 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( -60.57730685804358500, 30.10194129511615600, 7.513450805092857900 ) ) ; +#42 = EDGE_CURVE ( 'NONE', #379, #358, #786, .T. ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 4.040059887908535400 ) ) ; +#44 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #1169, #547 ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( -52.44560281338208800, 31.68840681690125600, -19.62311580932302100 ) ) ; +#46 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( -51.31953486837056000, 31.74610342019271800, 6.035385992609175100 ) ) ; +#48 = EDGE_CURVE ( 'NONE', #1021, #428, #820, .T. ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216530800, 29.69386953851234500, 6.349999999999992500 ) ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -129.5477436145402200 ) ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #103, #180 ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #864, .F. ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054230600, -31.73794059669042500, -19.04999999999999700 ) ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( -62.16084018260669800, -29.64826089447565800, 3.096356505089507700 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730587700, -31.75000000000000700, 4.855349149155075300 ) ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( -56.74127022976224300, -31.19655710517921300, 1.110866616096369200 ) ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, 25.40000000000000600, -25.39999999999999900 ) ) ; +#58 = EDGE_CURVE ( 'NONE', #840, #1154, #811, .T. ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( -51.27578029292149600, -31.74667818611120400, -16.01747748034416600 ) ) ; +#60 = PLANE ( 'NONE', #764 ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 4.040059887908753900 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( -59.41719453132790100, -30.56012233139373200, -14.00954823734070400 ) ) ; +#63 = EDGE_CURVE ( 'NONE', #461, #461, #809, .T. ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, 31.75000000000000700, -19.04999999999999700 ) ) ; +#65 = ORIENTED_EDGE ( 'NONE', *, *, #266, .F. ) ; +#66 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ; +#67 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #76 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #696, #189, #799 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#68 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, 31.75000000000000700, -19.04999999999999700 ) ) ; +#69 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( -46.67402035382949800, 27.89819190509426900, 4.650000000000002100 ) ) ; +#71 = ORIENTED_EDGE ( 'NONE', *, *, #1124, .T. ) ; +#72 = PRODUCT_CONTEXT ( 'NONE', #968, 'mechanical' ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( -62.44569183311502100, -29.53714474160069900, -16.41901334319790000 ) ) ; +#74 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75 = EDGE_CURVE ( 'NONE', #458, #458, #804, .T. ) ; +#76 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #696, 'distance_accuracy_value', 'NONE'); +#77 = EDGE_CURVE ( 'NONE', #418, #418, #794, .T. ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054227000, 31.73794059669041100, -19.04999999999999700 ) ) ; +#79 = ADVANCED_FACE ( 'NONE', ( #795 ), #788, .T. ) ; +#80 = AXIS2_PLACEMENT_3D ( 'NONE', #395, #335, #331 ) ; +#81 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#83 = ADVANCED_FACE ( 'NONE', ( #792 ), #405, .T. ) ; +#84 = VERTEX_POINT ( 'NONE', #984 ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216542100, 29.69386953851229500, -19.04999999999980900 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( -53.07302431247325100, 31.60352386286915300, -19.96729651621215100 ) ) ; +#87 = EDGE_CURVE ( 'NONE', #428, #939, #802, .T. ) ; +#88 = ORIENTED_EDGE ( 'NONE', *, *, #6, .F. ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( -51.49206023357673700, -31.74298419147975600, 6.199885827309726600 ) ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -25.39999999999999900 ) ) ; +#92 = EDGE_CURVE ( 'NONE', #423, #423, #791, .T. ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( -51.27578029292148900, 31.74667818611119000, -16.01747748034414800 ) ) ; +#94 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406984400, 5.551115123125782700E-017 ) ) ; +#95 = AXIS2_PLACEMENT_3D ( 'NONE', #756, #232, #858 ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( -59.41719453132776600, 30.56012233139375700, -14.00954823734067700 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705900600, -28.42524458648364300, 4.650000000000002100 ) ) ; +#98 = ORIENTED_EDGE ( 'NONE', *, *, #1124, .F. ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( -62.44569183311495000, 29.53714474160072400, -16.41901334319772600 ) ) ; +#100 = EDGE_CURVE ( 'NONE', #228, #443, #785, .T. ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187572100, 26.31215327778013000, 4.650000000000002100 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#103 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406983900, 5.551115123125782100E-017 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -79.13437485815850900, -41.10379243870458100, 4.650000000000001200 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -58.55298279648933100, -30.53831578015855200, -20.79286689900538900 ) ) ; +#107 = EDGE_CURVE ( 'NONE', #425, #425, #787, .T. ) ; +#108 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #166, #326 ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674640500, -22.85997687295769200, 12.69999999999999900 ) ) ; +#110 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #251, #680, #892, #324, #998, #401, #1102, #487, #16, #586, #106, #684, #182, #789, #253, #899, #328, #1002, #403, #1110, #494, #19, #588, #111 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.469446951953614200E-018, 0.0007169938431044163300, 0.001433987686208829200, 0.002867975372417643200, 0.003584969215522059800, 0.004301963058626475900, 0.005735950744835289900, 0.007169938431044103000, 0.008603926117252915300, 0.009320919960357314900, 0.01003791380346171500, 0.01147190148967052600 ), + .UNSPECIFIED. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054230600, -31.73794059669042500, -19.04999999999999700 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -24.75590763595949200, -15.74669673426268300, 4.650000000000000400 ) ) ; +#113 = EDGE_CURVE ( 'NONE', #440, #440, #776, .T. ) ; +#114 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #1050, .F. ) ; +#116 = SURFACE_STYLE_USAGE ( .BOTH. , #593 ) ; +#117 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #17, #24 ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 6.349999999999994300 ) ) ; +#119 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( -53.93686805702130700, -31.46161426604176400, 7.646139327556858800 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 5.259940112091703300 ) ) ; +#122 = EDGE_CURVE ( 'NONE', #870, #828, #686, .T. ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( -61.18843075711892300, -29.95044728588915100, 7.152672484870290500 ) ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( -61.95883121709770300, 29.72547445502558400, 2.814918313788739500 ) ) ; +#125 = VERTEX_POINT ( 'NONE', #1054 ) ; +#126 = EDGE_CURVE ( 'NONE', #439, #439, #775, .T. ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -55.40164474985740400, 31.42210579760489600, 1.305652865523420700 ) ) ; +#128 = AXIS2_PLACEMENT_3D ( 'NONE', #415, #1117, #506 ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( -54.60628812351071600, 31.33927874002708000, 7.874154034507406600 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( -50.89107182526768000, 31.74999999999998600, 5.480622021352077800 ) ) ; +#131 = EDGE_CURVE ( 'NONE', #509, #509, #774, .T. ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( -61.38122137732684500, 29.89999708958101000, 7.018762283833832600 ) ) ; +#133 = EDGE_CURVE ( 'NONE', #427, #427, #772, .T. ) ; +#134 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.730349362740526000E-014, 0.0000000000000000000 ) ) ; +#135 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #256, #252 ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( -62.13931238188666100, -29.65626039870219100, 6.210536667339762400 ) ) ; +#137 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #981, .F. ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054226300, 31.73794059669041100, 6.349999999999995200 ) ) ; +#140 = ORIENTED_EDGE ( 'NONE', *, *, #1166, .F. ) ; +#141 = PLANE ( 'NONE', #620 ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( -62.22697829175380200, -29.62251131918216300, 6.064392776069301000 ) ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 6.349999999999994300 ) ) ; +#144 = EDGE_CURVE ( 'NONE', #358, #428, #779, .T. ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( -50.86722149789583400, -31.75000000000001400, -16.57717121783508700 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( -61.61143118000582300, -29.85281673924610500, 2.451526685807075000 ) ) ; +#147 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730587000, -31.75000000000000700, 4.444650850844962700 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( -54.74082594174727500, -31.51127497092501900, 1.463264524804587500 ) ) ; +#150 = EDGE_CURVE ( 'NONE', #413, #413, #771, .T. ) ; +#151 = AXIS2_PLACEMENT_3D ( 'NONE', #361, #1044, #937 ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( -51.92507194752207800, -31.73140957424465500, -15.44578066120374700 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730587700, -31.75000000000000700, -17.14465085084495400 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, 29.11974387893085500, -25.40000000000000200 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( -60.36464847456598200, -30.27684479229939600, -14.32856936836558100 ) ) ; +#156 = EDGE_CURVE ( 'NONE', #936, #259, #763, .T. ) ; +#157 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #866, #390, #5, #569, #93, #666, #172, #773, #243, #880, #311, #982, #394, #1089, #474, #7, #574, #96, #668, #176, #778, #244, #881, #317, #988, #398, #1093, #478, #10, #576, #99, #675, #177, #782, #246, #886, #322, #996, #400, #1098, #485, #12 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.797157557069881000E-017, 0.0005182716356577273500, 0.001036543271315426700, 0.002073086542630840000, 0.003109629813946256400, 0.004146173085261673100, 0.006219259627892485000, 0.008292346170523297700, 0.009328889441838713100, 0.01036543271315412900, 0.01140197598446954800, 0.01192024762012725900, 0.01243851925578496800, 0.01295679089144267800, 0.01347506252710038900, 0.01399333416275809800, 0.01451160579841580900, 0.01502987743407352100, 0.01554814906973123200, 0.01606642070538893300, 0.01658469234104663700 ), + .UNSPECIFIED. ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( -53.44543607623847200, -25.20785194250351700, -17.35000000000000100 ) ) ; +#159 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #644 ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( -62.57182869419920500, -29.48706212888555100, -16.92516301478117300 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999700, -129.5477436145402200 ) ) ; +#162 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#163 = ADVANCED_FACE ( 'NONE', ( #807 ), #755, .T. ) ; +#164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#165 = ORIENTED_EDGE ( 'NONE', *, *, #916, .F. ) ; +#166 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #315, .NOT_KNOWN. ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, -19.04999999999999700 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( -53.28865388289672500, 31.57060362461225400, -20.07314853153580400 ) ) ; +#169 = ADVANCED_FACE ( 'NONE', ( #765 ), #141, .T. ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -16.74005988790875000 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000700, -19.04999999999999700 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( -51.92507194752207100, 31.73140957424464800, -15.44578066120375000 ) ) ; +#173 = EDGE_CURVE ( 'NONE', #1154, #500, #749, .T. ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216542100, 29.69386953851229500, -19.04999999999980900 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 12.69999999999999900 ) ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( -60.36464847456584000, 30.27684479229943900, -14.32856936836553000 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( -62.57182869419918300, 29.48706212888555800, -16.92516301478097800 ) ) ; +#178 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406971100, 0.0000000000000000000 ) ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -17.95994011209126000 ) ) ; +#180 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #560, #383, #4, #562, #90, #662 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 8.673617379884035500E-019, 0.0006999833402972146100, 0.001399966680594428400 ), + .UNSPECIFIED. ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( -57.39328063081369900, -30.77764324040069600, -20.90731918508771500 ) ) ; +#183 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#184 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #94, #20 ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, -31.75000000000000700, 6.349999999999994300 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187572100, 26.31215327778013000, -17.35000000000000100 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054228500, -31.73794059669042500, 6.349999999999994300 ) ) ; +#188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#189 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#190 = EDGE_CURVE ( 'NONE', #840, #358, #760, .T. ) ; +#191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#192 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674643400, 22.85997687295763100, 12.69999999999999900 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( -55.05967068518469900, -31.25031850156531700, 7.987381428482433600 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( -62.37738287257909800, 29.56405275933932900, 5.757701689658105700 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( -61.73727303107610000, -29.79802856631178200, 6.714971504744825700 ) ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -61.48780627250659600, 29.89736620018083700, 2.339199801785850400 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054226300, 31.73794059669041100, 6.349999999999995200 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( -53.76471558529151200, 31.61297164689563000, 1.795470393488327200 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( -55.75026734667638100, 31.11222060760132300, 8.105322673640019500 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, 31.75000000000000700, -22.76974387893084600 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -19.04999999999999700 ) ) ; +#204 = ORIENTED_EDGE ( 'NONE', *, *, #835, .T. ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( -61.90221523795605700, 29.74600826642441100, 6.543342384111562100 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -25.39999999999999900 ) ) ; +#207 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #315 ) ) ; +#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#209 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #555, #761, #235, #862 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.110514432314173100, 6.455856182045001100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9900862581299151300, 0.9900862581299151300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#210 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406983300, -5.551115123125782700E-017 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( -62.44054660075849500, -29.53917466561535600, 5.595697206715008100 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( -51.49260924918567600, -31.74296905536264600, -18.90033632854747500 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( -61.22638780860152300, -29.98953393920941200, 2.130213573561227300 ) ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -25.39999999999999900 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( -53.44158872955434700, -31.64148051630074600, 1.922866951181859200 ) ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 12.69999999999999900 ) ) ; +#218 = EDGE_CURVE ( 'NONE', #828, #500, #647, .T. ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( -52.81740738877273600, -31.68738483540788000, -14.91085574592376200 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( -53.72373336961248900, 31.49906047899525400, -20.26362959701247800 ) ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -129.5477436145402200 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( -79.13437485815850900, -41.10379243870458100, -17.35000000000000100 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( -61.08922287922366900, -30.03691912026170700, -14.73418333613398400 ) ) ; +#224 = AXIS2_PLACEMENT_3D ( 'NONE', #1015, #596, #119 ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( -51.20555928901278300, -30.01128321379778200, 4.650000000000002100 ) ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( -62.60291003826003500, -29.47463546811159000, -17.44188431128382900 ) ) ; +#228 = VERTEX_POINT ( 'NONE', #999 ) ; +#229 = ADVANCED_FACE ( 'NONE', ( #743, #747 ), #60, .F. ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#231 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ; +#232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#233 = AXIS2_PLACEMENT_3D ( 'NONE', #867, #863, #844 ) ; +#234 = ADVANCED_FACE ( 'NONE', ( #739 ), #727, .T. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730586300, 31.74999999999999300, -17.55534914915505200 ) ) ; +#236 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 5.259940112091703300 ) ) ; +#238 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#239 = EDGE_CURVE ( 'NONE', #1153, #1057, #591, .T. ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, -25.40000000000000600 ) ) ; +#241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#242 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( -52.81740738877270800, 31.68738483540788000, -14.91085574592377200 ) ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( -61.08922287922357000, 30.03691912026175400, -14.73418333613390800 ) ) ; +#245 = VERTEX_POINT ( 'NONE', #484 ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( -62.60291003826002100, 29.47463546811157900, -17.44188431128362300 ) ) ; +#247 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #208, #74 ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #770, .F. ) ; +#249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#250 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #367, #145, #1160, #539, #59, #635, #152, #740, #219, #843, #291, #952, #372, #1059, #450, #1163, #545, #62, #639, #155, #748, #223, #846, #295, #961, #375, #1063, #452, #1170, #548, #73, #646, #160, #753, #227, #851, #300, #965, #378, #1067, #456, #1177 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 9.813077866773594800E-018, 0.0005182716356577224800, 0.001036543271315435000, 0.002073086542630867800, 0.003109629813946300600, 0.004146173085261733000, 0.006219259627892579500, 0.008292346170523429500, 0.009328889441838864000, 0.01036543271315430200, 0.01140197598446973700, 0.01192024762012745800, 0.01243851925578517800, 0.01295679089144289800, 0.01347506252710061300, 0.01399333416275832700, 0.01451160579841604700, 0.01502987743407376700, 0.01554814906973148700, 0.01606642070538920300, 0.01658469234104691800 ), + .UNSPECIFIED. ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235600, -19.04999999999999700 ) ) ; +#252 = DIRECTION ( 'NONE', ( -0.4226182617406985500, 0.9063077870366502700, 0.0000000000000000000 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( -55.98392189561945300, -31.06548893794098400, -20.84508032005320600 ) ) ; +#254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#255 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#256 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406983900, -5.551115123125782700E-017 ) ) ; +#257 = PLANE ( 'NONE', #598 ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, 25.40000000000000600, -25.39999999999999900 ) ) ; +#259 = VERTEX_POINT ( 'NONE', #488 ) ; +#260 = AXIS2_PLACEMENT_3D ( 'NONE', #901, #332, #1007 ) ; +#261 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054228500, -31.73794059669042500, 6.349999999999994300 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000400, -25.41000000000001100 ) ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( -55.98222292283757200, -31.06535431335480300, 8.135922774189328500 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( -62.53654435302279100, 29.50116424380046700, 5.262113867882127300 ) ) ; +#266 = EDGE_CURVE ( 'NONE', #1154, #828, #737, .T. ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235200, 6.349999999999991700 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( -61.08790196861921400, 30.03737597502541600, 2.033252659427286600 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187570700, -26.31215327778012300, 4.650000000000002100 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, 31.75000000000000700, 6.349999999999994300 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( -52.81469432481262800, 31.68757306985049700, 2.212160145501524100 ) ) ; +#272 = ORIENTED_EDGE ( 'NONE', *, *, #1050, .T. ) ; +#273 = AXIS2_PLACEMENT_3D ( 'NONE', #356, #1035, #435 ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( -56.44968514579494500, 30.97045345691403600, 8.179964051772072900 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -53.55491754192967600, -24.97306818166120100, 3.002671082198547600E-015 ) ) ; +#276 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -129.5477436145402200 ) ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -19.04999999999999700 ) ) ; +#278 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #762, #657 ) ; +#279 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #532, #55, #148, #734 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.110514432314163400, 6.455856182044999300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9900862581299148000, 0.9900862581299148000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#280 = DIRECTION ( 'NONE', ( 0.4226182617406971100, 0.9063077870366510500, 0.0000000000000000000 ) ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#282 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( -62.56904337654879800, -29.48817464390931400, 5.092705003553592600 ) ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .F. ) ; +#285 = EDGE_CURVE ( 'NONE', #1153, #431, #738, .T. ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( -60.66261374836226800, -30.18080316317698200, 1.769905158299326400 ) ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( -54.60926692086815100, 31.33868261408161300, -20.57483293406301100 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( -52.50836656925125100, -31.70535843785589200, 2.374791279330544600 ) ) ; +#289 = EDGE_CURVE ( 'NONE', #1107, #1153, #729, .T. ) ; +#290 = AXIS2_PLACEMENT_3D ( 'NONE', #621, #830, #282 ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( -53.75953313019898200, -31.61343980626037000, -14.49748128384873700 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -16.74005988790875000 ) ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ; +#294 = PLANE ( 'NONE', #683 ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( -61.48777842725005600, -29.89737811425417700, -15.03914799059516800 ) ) ; +#296 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#297 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #348, #337 ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( -51.20555928901278300, 30.01128321379778200, -17.35000000000000100 ) ) ; +#299 = ADVANCED_FACE ( 'NONE', ( #726 ), #711, .T. ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( -62.53666895695298000, -29.50111372784381200, -17.96118407628361200 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.39999999999999100, -25.39999999999999900 ) ) ; +#302 = ADVANCED_FACE ( 'NONE', ( #723, #709 ), #705, .F. ) ; +#303 = DIRECTION ( 'NONE', ( 0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#304 = ADVANCED_FACE ( 'NONE', ( #712 ), #697, .F. ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -19.04999999999999700 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( -58.55298279648943800, 30.53831578015849900, -20.79286689900536800 ) ) ; +#307 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #698, #191 ) ; +#308 = SURFACE_STYLE_USAGE ( .BOTH. , #682 ) ; +#309 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406984400, -5.551115123125782700E-017 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, 6.349999999999994300 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( -53.75953313019893200, 31.61343980626037700, -14.49748128384875700 ) ) ; +#312 = EDGE_CURVE ( 'NONE', #1009, #259, #703, .T. ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705899100, -28.42524458648362900, 4.650000000000001200 ) ) ; +#314 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#315 = PRODUCT ( 'Trellais_Clamp_3', 'Trellais_Clamp_3', '', ( #72 ) ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #629, .T. ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( -61.48777842724992800, 29.89737811425422000, -15.03914799059506400 ) ) ; +#318 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( -61.73932200154892100, 29.79739610341736600, -19.41293147832696400 ) ) ; +#320 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #121, #817, #523, #43 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.110514432313947500, 6.455856182045100600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9900862581298964800, 0.9900862581298964800, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#321 = CARTESIAN_POINT ( 'NONE', ( -79.13437485815850900, 41.10379243870458100, -17.35000000000000100 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( -62.53666895695303700, 29.50111372784380100, -17.96118407628342300 ) ) ; +#323 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #915, #342 ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -61.38414975900684600, -29.89920346910836100, -19.71655147031629000 ) ) ; +#325 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#326 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #644, 'design' ) ; +#327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( -54.60926692086810200, -31.33868261408163400, -20.57483293406299300 ) ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#330 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #527, #470 ) ; +#331 = DIRECTION ( 'NONE', ( 1.000000000000000000, 8.881784197001252300E-016, 0.0000000000000000000 ) ) ; +#332 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -129.5477436145402200 ) ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -19.04999999999999700 ) ) ; +#335 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#336 = DIRECTION ( 'NONE', ( -0.4226182617406983300, 0.9063077870366504900, 0.0000000000000000000 ) ) ; +#337 = DIRECTION ( 'NONE', ( -0.4226182617406983300, 0.9063077870366504900, 0.0000000000000000000 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, 6.349999999999994300 ) ) ; +#339 = EDGE_CURVE ( 'NONE', #1171, #431, #552, .T. ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( -52.04879569969146000, -31.72763524134437300, 6.656721684963641500 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 6.349999999999994300 ) ) ; +#342 = DIRECTION ( 'NONE', ( 0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#343 = EDGE_CURVE ( 'NONE', #431, #125, #715, .T. ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -56.68596051205637600, -30.92225975342949300, 8.193380851080315000 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( -62.60256539681010000, 29.47477355100126000, 4.748551403171398500 ) ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #507, .T. ) ; +#347 = AXIS2_PLACEMENT_3D ( 'NONE', #942, #210, #528 ) ; +#348 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406983300, -5.551115123125782700E-017 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( -60.36356478727275700, 30.27716852836121200, 1.628206687462466300 ) ) ; +#350 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#351 = PLANE ( 'NONE', #297 ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( -51.92321886288288400, 31.73147726460144500, 2.747081839164720000 ) ) ; +#353 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #137, #134 ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( -57.39028525486474300, 30.77825872387945300, 8.207473966361314800 ) ) ; +#355 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, -19.04999999999999700 ) ) ; +#357 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53, #212, #365, #1048, #446, #1156 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.469446951953614200E-018, 0.0007022395587781172100, 0.001404479117556231000 ), + .UNSPECIFIED. ) ; +#358 = VERTEX_POINT ( 'NONE', #258 ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .T. ) ; +#360 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( -24.75590763595949200, 15.74669673426268300, 4.650000000000000400 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -19.04999999999999700 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( -62.60327297919389600, -29.47448951098220200, 4.571695168884789800 ) ) ; +#364 = AXIS2_PLACEMENT_3D ( 'NONE', #82, #397, #188 ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( -51.32280300930665400, -31.74605172502088700, -18.73875889090943800 ) ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( -59.74006670608316200, -30.46709557581644400, 1.397479472242046900 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -16.74005988790875000 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705900600, 28.42524458648364300, 4.650000000000002100 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( -51.64796316702315700, -31.73962682479965700, 2.953371230213340100 ) ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ; +#371 = EDGE_CURVE ( 'NONE', #1009, #496, #720, .T. ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( -55.40471898472608800, -31.42168096423962000, -14.00493823757080700 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, 31.75000000000000000, -129.5477436145402200 ) ) ; +#374 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#375 = CARTESIAN_POINT ( 'NONE', ( -61.84463914409727900, -29.76732549298189000, -15.39562576372851600 ) ) ; +#376 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #750 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #651, #162, #754 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#377 = CARTESIAN_POINT ( 'NONE', ( -51.20555928901278300, 30.01128321379778200, 4.650000000000002100 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( -62.37898530323626300, -29.56342688251705700, -18.45413010571536800 ) ) ; +#379 = VERTEX_POINT ( 'NONE', #68 ) ; +#380 = FILL_AREA_STYLE ('',( #1174 ) ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ; +#382 = ADVANCED_FACE ( 'NONE', ( #694 ), #679, .T. ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( -50.89107182526739600, -31.75000000000000700, 5.480622021351613200 ) ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( -55.06178002900907800, 31.24990466330249500, -20.68788705127457900 ) ) ; +#385 = AXIS2_PLACEMENT_3D ( 'NONE', #368, #309, #303 ) ; +#386 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #292, #153, #438, #953 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.110514432314174000, 6.455856182045000200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9900862581299152400, 0.9900862581299152400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#387 = ADVANCED_FACE ( 'NONE', ( #695, #678 ), #674, .F. ) ; +#388 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#389 = EDGE_CURVE ( 'NONE', #84, #1171, #691, .T. ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( -50.86722149789579800, 31.74999999999999300, -16.57717121783507600 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 25.39999999999999900, -19.04999999999999700 ) ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ; +#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( -55.40471898472600300, 31.42168096423961300, -14.00493823757081600 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 6.349999999999994300 ) ) ; +#396 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #1150, #731 ) ; +#397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( -61.84463914409715100, 29.76732549298192500, -15.39562576372838800 ) ) ; +#399 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406982800, 0.0000000000000000000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( -62.37898530323632000, 29.56342688251700700, -18.45413010571516900 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( -60.57986132256645100, -30.10133385977633900, -20.21213584889173000 ) ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153800, -31.75000000000000700, -129.5477436145402200 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -53.72373336961248900, -31.49906047899528300, -20.26362959701247800 ) ) ; +#404 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#405 = PLANE ( 'NONE', #1141 ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#407 = ORIENTED_EDGE ( 'NONE', *, *, #173, .F. ) ; +#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -31.75000000000000000, -19.04999999999999700 ) ) ; +#410 = VERTEX_POINT ( 'NONE', #455 ) ; +#411 = VERTEX_POINT ( 'NONE', #1064 ) ; +#412 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#413 = VERTEX_POINT ( 'NONE', #377 ) ; +#414 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -19.04999999999999700 ) ) ; +#416 = EDGE_LOOP ( 'NONE', ( #780 ) ) ; +#417 = AXIS2_PLACEMENT_3D ( 'NONE', #878, #636, #908 ) ; +#418 = VERTEX_POINT ( 'NONE', #158 ) ; +#419 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( -57.85625387826698300, -30.68265182470989300, 8.182861958120758700 ) ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( -62.57192478331943900, 29.48702378759573200, 4.225251844656654000 ) ) ; +#422 = EDGE_CURVE ( 'NONE', #496, #125, #688, .T. ) ; +#423 = VERTEX_POINT ( 'NONE', #957 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( -24.75590763595949200, 15.74669673426268300, -17.35000000000000100 ) ) ; +#425 = VERTEX_POINT ( 'NONE', #751 ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( -59.41410336200082300, 30.56099656594757600, 1.308774184696035000 ) ) ; +#427 = VERTEX_POINT ( 'NONE', #964 ) ; +#428 = VERTEX_POINT ( 'NONE', #492 ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( -52.44393399730235900, 31.68851797234172800, 6.921822753649925300 ) ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#431 = VERTEX_POINT ( 'NONE', #185 ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( -51.27922311436113700, 31.74662121130694100, 3.313918886200768000 ) ) ; +#433 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1146, #136, #142, #728, #211, #831, #283, #943, #363, #1047, #442, #1151, #529, #54, #627, #146, #732, #213, #833, #286, #948, #366, #1049, #447, #1157, #533, #56, #633, #149, #736, #216, #839, #288, #950, #369, #1055, #449, #1162, #541, #61 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.0005197816573414617300, 0.001039563314682922600, 0.001559344972024383600, 0.002079126629365844300, 0.002598908286707305500, 0.003118689944048765000, 0.004158253258731684300, 0.004678034916073150700, 0.005197816573414617900, 0.006237379888097568900, 0.007276943202780519900, 0.008316506517463472700, 0.01039563314682935200, 0.01247475977619523200, 0.01351432309087816400, 0.01455388640556109400, 0.01559344972024402600, 0.01611323137758548900, 0.01663301303492695600 ), + .UNSPECIFIED. ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( -58.78058895059032100, 30.49116764328146400, 8.063578432810389900 ) ) ; +#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( -47.41360231187570700, -26.31215327778012300, -17.35000000000000100 ) ) ; +#437 = DIRECTION ( 'NONE', ( -1.365923996832131600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730587700, -31.75000000000000700, -17.55534914915505600 ) ) ; +#439 = VERTEX_POINT ( 'NONE', #849 ) ; +#440 = VERTEX_POINT ( 'NONE', #225 ) ; +#441 = PLANE ( 'NONE', #347 ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( -62.54037397507023100, -29.49963814600083400, 4.055428113222431500 ) ) ; +#443 = VERTEX_POINT ( 'NONE', #49 ) ; +#444 = PRESENTATION_STYLE_ASSIGNMENT (( #308 ) ) ; +#445 = EDGE_CURVE ( 'NONE', #84, #939, #673, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( -50.89050961689432700, -31.75000000000000700, -18.17925969862655200 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( -58.75998466297744500, -30.73785828583797300, 1.180209703662116900 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( -59.24328315985197000, 30.39350614523560200, -20.65658531384193000 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( -51.16360013252482700, -31.74808756259111300, 3.442973667484817900 ) ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( -57.41846787594091900, -31.06022706231214800, -13.77471439855837900 ) ) ; +#451 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( -62.14737479215653300, -29.65317021463821600, -15.80236007591374800 ) ) ; +#453 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ; +#454 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( -46.67402035382948400, -27.89819190509426200, -17.35000000000000100 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( -62.13932310025712300, -29.65625634150067200, -18.91052162230421600 ) ) ; +#457 = ADVANCED_FACE ( 'NONE', ( #661 ), #658, .T. ) ; +#458 = VERTEX_POINT ( 'NONE', #70 ) ; +#459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#460 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #198, #710, #429, #1132, #519, #38, #609, #129, #716, #201, #815, #274, #931, #354, #1033, #434, #1137, #522, #41, #616, #132, #719, #205, #821 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 7.410741937918042400E-018, 0.001429893727743425000, 0.002144840591615124800, 0.002859787455486824800, 0.004289681183230229600, 0.005004628047101921000, 0.005719574910973613200, 0.007149468638716976800, 0.008579362366460339600, 0.01000925609420370100, 0.01072420295807538300, 0.01143914982194706300 ), + .UNSPECIFIED. ) ; +#461 = VERTEX_POINT ( 'NONE', #642 ) ; +#462 = CYLINDRICAL_SURFACE ( 'NONE', #613, 3.550000000000000300 ) ; +#463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#464 = ADVANCED_FACE ( 'NONE', ( #676, #656 ), #257, .F. ) ; +#465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#466 = DIRECTION ( 'NONE', ( -0.4226182617406971100, -0.9063077870366510500, 0.0000000000000000000 ) ) ; +#467 = SURFACE_STYLE_FILL_AREA ( #380 ) ; +#468 = FACE_OUTER_BOUND ( 'NONE', #1052, .T. ) ; +#469 = VERTEX_POINT ( 'NONE', #187 ) ; +#470 = DIRECTION ( 'NONE', ( -0.4226182617406985500, -0.9063077870366502700, 0.0000000000000000000 ) ) ; +#471 = DIRECTION ( 'NONE', ( -0.4226182617406969400, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#472 = VECTOR ( 'NONE', #935, 1000.000000000000100 ) ; +#473 = FACE_OUTER_BOUND ( 'NONE', #869, .T. ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( -57.41846787594080600, 31.06022706231215100, -13.77471439855838400 ) ) ; +#475 = EDGE_CURVE ( 'NONE', #125, #469, #670, .T. ) ; +#476 = LINE ( 'NONE', #193, #472 ) ; +#477 = FACE_OUTER_BOUND ( 'NONE', #970, .T. ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( -62.14737479215643400, 29.65317021463824400, -15.80236007591360300 ) ) ; +#479 = CIRCLE ( 'NONE', #273, 6.350000000000001400 ) ; +#480 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#481 = LINE ( 'NONE', #338, #510 ) ; +#482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#483 = DIRECTION ( 'NONE', ( 0.4226182617406969400, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054230600, -31.73794059669042500, -19.04999999999999700 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( -62.13932310025733600, 29.65625634150056600, -18.91052162230382900 ) ) ; +#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( -59.47304431693428500, -30.34461489062031300, -20.59770495332801200 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 6.349999999999994300 ) ) ; +#489 = FACE_OUTER_BOUND ( 'NONE', #926, .T. ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.39999999999999100, -19.04999999999999700 ) ) ; +#491 = FACE_BOUND ( 'NONE', #910, .T. ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999400, -25.40000000000000600 ) ) ; +#493 = FACE_BOUND ( 'NONE', #944, .T. ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( -53.07302431247327200, -31.60352386286916000, -19.96729651621215500 ) ) ; +#495 = FACE_OUTER_BOUND ( 'NONE', #894, .T. ) ; +#496 = VERTEX_POINT ( 'NONE', #26 ) ; +#497 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406984400, 5.551115123125782700E-017 ) ) ; +#498 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406983300, -5.551115123125782700E-017 ) ) ; +#499 = CIRCLE ( 'NONE', #128, 31.75000000000000000 ) ; +#500 = VERTEX_POINT ( 'NONE', #800 ) ; +#501 = TOROIDAL_SURFACE ( 'NONE', #224, 25.39999999999999900, 6.349999999999999600 ) ; +#502 = PLANE ( 'NONE', #323 ) ; +#503 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ; +#504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #262, #340, #1120, #508, #29, #600, #120, #700, #194, #805, #264, #918, #344, #1018, #420, #1127, #511, #33, #604, #123, #704, #196, #810, #267 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.001429893727743323900, 0.002144840591614994700, 0.002859787455486666100, 0.004289681183230031900, 0.005004628047101725800, 0.005719574910973418900, 0.007149468638716827700, 0.008579362366460233800, 0.01000925609420364600, 0.01072420295807535000, 0.01143914982194705500 ), + .UNSPECIFIED. ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674640500, -22.85997687295769200, -25.39999999999999900 ) ) ; +#506 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#507 = EDGE_CURVE ( 'NONE', #1057, #939, #654, .T. ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( -53.06661942115137300, -31.60444668652684900, 7.263968553914927500 ) ) ; +#509 = VERTEX_POINT ( 'NONE', #298 ) ; +#510 = VECTOR ( 'NONE', #419, 1000.000000000000000 ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -59.24077973538440000, -30.39494812977945400, 7.968820446989531600 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( -62.44681357581757200, 29.53670200529579000, 3.722274370346864800 ) ) ; +#513 = SHAPE_DEFINITION_REPRESENTATION ( #904, #991 ) ; +#514 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#515 = DIRECTION ( 'NONE', ( -0.9063077870366504900, 0.4226182617406983900, 5.551115123125782100E-017 ) ) ; +#516 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( -58.42928210273830600, 30.82165363782736700, 1.139294551226392600 ) ) ; +#518 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #825, #130, #525, #47, #619, #139 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.498855975253222400E-016, 0.0006999833402970428700, 0.001399966680593736000 ), + .UNSPECIFIED. ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( -53.27921389591126200, 31.57208167949691800, 7.368683648488404200 ) ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( -50.95606009196076500, 31.74978604945270200, 3.726725090135241600 ) ) ; +#521 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #327, #486 ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( -60.14292787891157800, 30.19938477824297300, 7.691814801051522800 ) ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730576400, 31.75000000000000700, 4.444650850844978700 ) ) ; +#524 = DIRECTION ( 'NONE', ( 0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -51.01956288958533000, 31.74959513100194300, 5.675449039396546000 ) ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ; +#527 = DIRECTION ( 'NONE', ( -0.9063077870366504900, 0.4226182617406983900, 5.551115123125782700E-017 ) ) ; +#528 = DIRECTION ( 'NONE', ( -0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( -62.38435634472433100, -29.56131896598747800, 3.558884731093628200 ) ) ; +#530 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, 29.11974387893085500, 12.69999999999999200 ) ) ; +#531 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #1113, #114 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( -50.80000000000000400, -31.75000000000000700, 5.259940112091291200 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( -57.42726315677190700, -31.05821946835230200, 1.075038543207966100 ) ) ; +#534 = COLOUR_RGB ( '',1.000000000000000000, 0.7529411764705882200, 0.7529411764705882200 ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#536 = FACE_OUTER_BOUND ( 'NONE', #941, .T. ) ; +#537 = FACE_OUTER_BOUND ( 'NONE', #1087, .T. ) ; +#538 = LINE ( 'NONE', #947, #594 ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( -51.15897327395624200, -31.74813392669062400, -16.14880116239522700 ) ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705899100, 28.42524458648362900, 4.650000000000001200 ) ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( -50.86721797984203900, -31.75000000000001400, 3.877179742654068400 ) ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ; +#543 = EDGE_CURVE ( 'NONE', #469, #228, #504, .T. ) ; +#544 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( -58.76357776277498600, -30.73692482530958600, -13.88075111180118200 ) ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( -62.38439478181904000, -29.56130343495247100, -16.25902415673862900 ) ) ; +#549 = COLOUR_RGB ( '',1.000000000000000000, 0.7529411764705882200, 0.7529411764705882200 ) ; +#550 = ADVANCED_FACE ( 'NONE', ( #655 ), #643, .T. ) ; +#551 = VECTOR ( 'NONE', #408, 1000.000000000000000 ) ; +#552 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #592, #798, #1114, #583 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#553 = VECTOR ( 'NONE', #254, 1000.000000000000000 ) ; +#554 = CYLINDRICAL_SURFACE ( 'NONE', #1130, 3.550000000000000300 ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999998300, 31.75000000000000000, -16.74005988790871400 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -53.94348844985398700, 31.46042980632913500, -20.34855914771192800 ) ) ; +#557 = SURFACE_STYLE_FILL_AREA ( #23 ) ; +#558 = ADVANCED_FACE ( 'NONE', ( #649, #641 ), #638, .F. ) ; +#559 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #236, #238 ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( -50.80000000000000400, -31.75000000000000700, 5.259940112091291200 ) ) ; +#561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( -51.31953486837032600, -31.74610342019273200, 6.035385992608922800 ) ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( -56.45695018187908700, 30.96908455481845800, -20.88901120932803900 ) ) ; +#564 = EDGE_CURVE ( 'NONE', #411, #411, #640, .T. ) ; +#565 = FACE_OUTER_BOUND ( 'NONE', #1119, .T. ) ; +#566 = CYLINDRICAL_SURFACE ( 'NONE', #1061, 3.550000000000000300 ) ; +#567 = LINE ( 'NONE', #1096, #553 ) ; +#568 = LINE ( 'NONE', #333, #551 ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( -51.15897327395622100, 31.74813392669061700, -16.14880116239519800 ) ) ; +#570 = PRESENTATION_STYLE_ASSIGNMENT (( #116 ) ) ; +#571 = VECTOR ( 'NONE', #872, 1000.000000000000000 ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #389, .F. ) ; +#573 = LINE ( 'NONE', #171, #571 ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( -58.76357776277486500, 30.73692482530961500, -13.88075111180116400 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705900600, -28.42524458648364300, -17.35000000000000100 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( -62.38439478181896900, 29.56130343495250300, -16.25902415673846900 ) ) ; +#577 = CYLINDRICAL_SURFACE ( 'NONE', #923, 6.350000000000001400 ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999400, 12.69999999999999900 ) ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#580 = FACE_OUTER_BOUND ( 'NONE', #1109, .T. ) ; +#581 = FACE_OUTER_BOUND ( 'NONE', #946, .T. ) ; +#582 = CARTESIAN_POINT ( 'NONE', ( -61.90152673646572600, 29.74626888340045000, -19.24430881174621500 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, -31.75000000000000700, 6.349999999999994300 ) ) ; +#584 = CYLINDRICAL_SURFACE ( 'NONE', #708, 31.75000000000000000 ) ; +#585 = CIRCLE ( 'NONE', #845, 31.75000000000000000 ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( -58.78364246170247000, -30.49027140462260700, -20.75402014566693900 ) ) ; +#587 = FACE_OUTER_BOUND ( 'NONE', #897, .T. ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( -52.04892261766631400, -31.72763174227207000, -19.35682582900588100 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000700, -19.04999999999999700 ) ) ; +#590 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#591 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #589, #681, #685, #579 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#592 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, -25.40000000000000600, 12.69999999999999900 ) ) ; +#593 = SURFACE_SIDE_STYLE ('',( #557 ) ) ; +#594 = VECTOR ( 'NONE', #632, 1000.000000000000000 ) ; +#595 = FACE_OUTER_BOUND ( 'NONE', #1017, .T. ) ; +#596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#597 = FACE_OUTER_BOUND ( 'NONE', #1040, .T. ) ; +#598 = AXIS2_PLACEMENT_3D ( 'NONE', #692, #498, #336 ) ; +#599 = CIRCLE ( 'NONE', #95, 19.04999999999999700 ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( -53.71444247154832400, -31.50065935010681900, 7.559879976178822700 ) ) ; +#601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#602 = TOROIDAL_SURFACE ( 'NONE', #396, 25.39999999999999900, 6.349999999999999600 ) ; +#603 = FACE_OUTER_BOUND ( 'NONE', #1138, .T. ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( -60.57730685804359900, -30.10194129511616300, 7.513450805092859700 ) ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( -62.16084018260668400, 29.64826089447563400, 3.096356505089538700 ) ) ; +#606 = EDGE_CURVE ( 'NONE', #806, #443, #460, .T. ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( -56.74127022976232100, 31.19655710517917100, 1.110866616096360100 ) ) ; +#608 = CYLINDRICAL_SURFACE ( 'NONE', #290, 1.750000000000001100 ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -53.93686805702126500, 31.46161426604175700, 7.646139327556859700 ) ) ; +#610 = FACE_BOUND ( 'NONE', #1043, .T. ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 4.040059887908535400 ) ) ; +#612 = VECTOR ( 'NONE', #1164, 1000.000000000000000 ) ; +#613 = AXIS2_PLACEMENT_3D ( 'NONE', #222, #746, #1144 ) ; +#614 = CYLINDRICAL_SURFACE ( 'NONE', #151, 1.750000000000001100 ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( -61.18843075711891500, 29.95044728588914400, 7.152672484870285200 ) ) ; +#617 = LINE ( 'NONE', #50, #624 ) ; +#618 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( -51.49206023357685100, 31.74298419147974200, 6.199885827309842100 ) ) ; +#620 = AXIS2_PLACEMENT_3D ( 'NONE', #215, #561, #81 ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( -24.75590763595949200, -15.74669673426268300, -17.35000000000000100 ) ) ; +#622 = FACE_OUTER_BOUND ( 'NONE', #1122, .T. ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( -50.80000000000000400, -31.75000000000000700, 5.259940112091291200 ) ) ; +#624 = VECTOR ( 'NONE', #742, 1000.000000000000000 ) ; +#625 = FACE_OUTER_BOUND ( 'NONE', #1081, .T. ) ; +#626 = FACE_BOUND ( 'NONE', #963, .T. ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( -61.95883121709771800, -29.72547445502560500, 2.814918313788709300 ) ) ; +#628 = FACE_OUTER_BOUND ( 'NONE', #1070, .T. ) ; +#629 = EDGE_CURVE ( 'NONE', #410, #410, #631, .T. ) ; +#630 = FACE_BOUND ( 'NONE', #992, .T. ) ; +#631 = CIRCLE ( 'NONE', #733, 1.750000000000001100 ) ; +#632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( -55.40164474985729700, -31.42210579760494600, 1.305652865523446900 ) ) ; +#634 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .F. ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( -51.64852017274288400, -31.73963270857132500, -15.65244692604040100 ) ) ; +#636 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406982800, 0.0000000000000000000 ) ) ; +#637 = STYLED_ITEM ( 'NONE', ( #570 ), #1034 ) ; +#638 = CYLINDRICAL_SURFACE ( 'NONE', #875, 1.750000000000001100 ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( -59.73785187001632100, -30.46776386557851200, -14.09669827581678400 ) ) ; +#640 = CIRCLE ( 'NONE', #665, 1.750000000000001100 ) ; +#641 = FACE_OUTER_BOUND ( 'NONE', #416, .T. ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( -46.67402035382949800, 27.89819190509426900, -17.35000000000000100 ) ) ; +#643 = CYLINDRICAL_SURFACE ( 'NONE', #803, 31.75000000000000000 ) ; +#644 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#645 = FACE_OUTER_BOUND ( 'NONE', #993, .T. ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( -62.53973139061143600, -29.49989431564874900, -16.75242030929934200 ) ) ; +#647 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #689, #714, #1111, #1103, #1097, #1010 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.469446951953613800E-018, 0.0007022395587780914100, 0.001404479117556179300 ), + .UNSPECIFIED. ) ; +#648 = ADVANCED_FACE ( 'NONE', ( #660 ), #1039, .F. ) ; +#649 = FACE_OUTER_BOUND ( 'NONE', #1133, .T. ) ; +#650 = VECTOR ( 'NONE', #912, 1000.000000000000000 ) ; +#651 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#652 = ADVANCED_FACE ( 'NONE', ( #630, #626, #645 ), #827, .T. ) ; +#653 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#654 = LINE ( 'NONE', #505, #650 ) ; +#655 = FACE_OUTER_BOUND ( 'NONE', #983, .T. ) ; +#656 = FACE_OUTER_BOUND ( 'NONE', #985, .T. ) ; +#657 = DIRECTION ( 'NONE', ( 0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#658 = CYLINDRICAL_SURFACE ( 'NONE', #531, 31.75000000000000000 ) ; +#659 = ADVANCED_FACE ( 'NONE', ( #628, #622 ), #614, .F. ) ; +#660 = FACE_OUTER_BOUND ( 'NONE', #922, .T. ) ; +#661 = FACE_OUTER_BOUND ( 'NONE', #914, .T. ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054228500, -31.73794059669042500, 6.349999999999994300 ) ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( -60.14697583417559200, 30.19847472468713400, -20.39016067940259800 ) ) ; +#664 = VECTOR ( 'NONE', #21, 1000.000000000000000 ) ; +#665 = AXIS2_PLACEMENT_3D ( 'NONE', #269, #925, #350 ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( -51.64852017274287000, 31.73963270857131000, -15.65244692604038700 ) ) ; +#667 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( -59.73785187001613700, 30.46776386557851500, -14.09669827581674000 ) ) ; +#669 = EDGE_CURVE ( 'NONE', #228, #887, #433, .T. ) ; +#670 = CIRCLE ( 'NONE', #307, 31.75000000000000000 ) ; +#671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#672 = LINE ( 'NONE', #221, #612 ) ; +#673 = LINE ( 'NONE', #793, #664 ) ; +#674 = CYLINDRICAL_SURFACE ( 'NONE', #417, 3.550000000000000300 ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( -62.53973139061140800, 29.49989431564876000, -16.75242030929914700 ) ) ; +#676 = FACE_BOUND ( 'NONE', #1004, .T. ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -25.40000000000000600 ) ) ; +#678 = FACE_OUTER_BOUND ( 'NONE', #1066, .T. ) ; +#679 = CYLINDRICAL_SURFACE ( 'NONE', #364, 31.75000000000000000 ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( -61.90152673646545600, -29.74626888340055300, -19.24430881174655600 ) ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000000, -22.76974387893084600 ) ) ; +#682 = SURFACE_SIDE_STYLE ('',( #467 ) ) ; +#683 = AXIS2_PLACEMENT_3D ( 'NONE', #373, #437, #1168 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -57.85885303242647400, -30.68211831592103100, -20.88269210027536000 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, -29.11974387893085500, -25.40000000000000200 ) ) ; +#686 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #174, #582, #319, #8, #735, #1080, #663, #873, #448, #1145, #306, #1074, #1161, #563, #741, #384, #287, #556, #220, #168, #86, #45, #1179, #1084 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.310766273514829500E-016, 0.0007169938431046453100, 0.001433987686209059700, 0.002867975372417886100, 0.003584969215522310900, 0.004301963058626734300, 0.005735950744835580400, 0.007169938431044426500, 0.008603926117253272700, 0.009320919960357703500, 0.01003791380346213400, 0.01147190148967101200 ), + .UNSPECIFIED. ) ; +#687 = DIRECTION ( 'NONE', ( 0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#688 = CIRCLE ( 'NONE', #260, 6.349999999999999600 ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054227000, 31.73794059669041100, -19.04999999999999700 ) ) ; +#690 = VECTOR ( 'NONE', #687, 1000.000000000000000 ) ; +#691 = LINE ( 'NONE', #109, #690 ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( -53.55491754192967600, -24.97306818166120100, 3.002671082198547600E-015 ) ) ; +#693 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#694 = FACE_OUTER_BOUND ( 'NONE', #1121, .T. ) ; +#695 = FACE_OUTER_BOUND ( 'NONE', #1090, .T. ) ; +#696 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#697 = CYLINDRICAL_SURFACE ( 'NONE', #117, 19.04999999999999700 ) ; +#698 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#699 = EDGE_CURVE ( 'NONE', #1107, #976, #617, .T. ) ; +#700 = CARTESIAN_POINT ( 'NONE', ( -54.60628812351073700, -31.33927874002710800, 7.874154034507403000 ) ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 25.40000000000000600, 6.349999999999999600 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( -62.22697829175378800, 29.62251131918215600, 6.064392776069305500 ) ) ; +#703 = CIRCLE ( 'NONE', #1116, 6.349999999999999600 ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( -61.38122137732686000, -29.89999708958101000, 7.018762283833832600 ) ) ; +#705 = CYLINDRICAL_SURFACE ( 'NONE', #51, 1.750000000000001100 ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -61.61143118000583000, 29.85281673924608000, 2.451526685807104800 ) ) ; +#707 = VECTOR ( 'NONE', #192, 1000.000000000000000 ) ; +#708 = AXIS2_PLACEMENT_3D ( 'NONE', #1073, #459, #164 ) ; +#709 = FACE_OUTER_BOUND ( 'NONE', #1053, .T. ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( -52.04879569969141800, 31.72763524134435900, 6.656721684963640600 ) ) ; +#711 = CYLINDRICAL_SURFACE ( 'NONE', #3, 6.350000000000001400 ) ; +#712 = FACE_OUTER_BOUND ( 'NONE', #954, .T. ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( -54.74082594174738900, 31.51127497092499000, 1.463264524804556800 ) ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -51.49260924918563400, 31.74296905536264600, -18.90033632854747100 ) ) ; +#715 = LINE ( 'NONE', #341, #707 ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( -55.05967068518469200, 31.25031850156531000, 7.987381428482435400 ) ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 4.040059887908535400 ) ) ; +#718 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #178, #14 ) ; +#719 = CARTESIAN_POINT ( 'NONE', ( -61.73727303107608600, 29.79802856631177100, 6.714971504744827500 ) ) ; +#720 = CIRCLE ( 'NONE', #1046, 25.39999999999999900 ) ; +#721 = VECTOR ( 'NONE', #255, 1000.000000000000000 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 19.04999999999999000, -25.41000000000001100 ) ) ; +#723 = FACE_OUTER_BOUND ( 'NONE', #987, .T. ) ; +#724 = EDGE_CURVE ( 'NONE', #876, #976, #386, .T. ) ; +#725 = VECTOR ( 'NONE', #393, 1000.000000000000000 ) ; +#726 = FACE_OUTER_BOUND ( 'NONE', #930, .T. ) ; +#727 = CYLINDRICAL_SURFACE ( 'NONE', #905, 6.350000000000001400 ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( -62.37738287257911200, -29.56405275933933700, 5.757701689658099500 ) ) ; +#729 = LINE ( 'NONE', #409, #721 ) ; +#730 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ; +#731 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( -61.48780627250658200, -29.89736620018086600, 2.339199801785821100 ) ) ; +#733 = AXIS2_PLACEMENT_3D ( 'NONE', #436, #1143, #524 ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 4.040059887908753900 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( -61.18932296733767400, 29.95021314258229600, -19.85204871162749600 ) ) ; +#736 = CARTESIAN_POINT ( 'NONE', ( -53.76471558529139100, -31.61297164689567300, 1.795470393488378200 ) ) ; +#737 = CIRCLE ( 'NONE', #829, 31.75000000000000000 ) ; +#738 = LINE ( 'NONE', #402, #725 ) ; +#739 = FACE_OUTER_BOUND ( 'NONE', #945, .T. ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( -52.50977622227519200, -31.70528040761203000, -15.07401727822996800 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( -55.98392189561951700, 31.06548893794095200, -20.84508032005321400 ) ) ; +#742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#743 = FACE_BOUND ( 'NONE', #1100, .T. ) ; +#744 = EDGE_CURVE ( 'NONE', #876, #887, #672, .T. ) ; +#745 = VECTOR ( 'NONE', #242, 1000.000000000000000 ) ; +#746 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406982800, 0.0000000000000000000 ) ) ; +#747 = FACE_OUTER_BOUND ( 'NONE', #1099, .T. ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( -60.66646704698413800, -30.17952615255433500, -14.47206829874426300 ) ) ; +#749 = LINE ( 'NONE', #1, #757 ) ; +#750 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #651, 'distance_accuracy_value', 'NONE'); +#751 = CARTESIAN_POINT ( 'NONE', ( -53.44543607623847200, -25.20785194250351700, 4.650000000000001200 ) ) ; +#752 = ADVANCED_FACE ( 'NONE', ( #537, #625 ), #608, .F. ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( -62.60311329094552200, -29.47455343918603900, -17.26896523098272600 ) ) ; +#754 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#755 = CYLINDRICAL_SURFACE ( 'NONE', #559, 6.350000000000001400 ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 12.69999999999999900 ) ) ; +#757 = VECTOR ( 'NONE', #994, 1000.000000000000000 ) ; +#758 = ADVANCED_FACE ( 'NONE', ( #610, #603 ), #441, .F. ) ; +#759 = VECTOR ( 'NONE', #241, 1000.000000000000000 ) ; +#760 = LINE ( 'NONE', #91, #745 ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730586300, 31.74999999999999300, -17.14465085084495000 ) ) ; +#762 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406984400, -5.551115123125782700E-017 ) ) ; +#763 = LINE ( 'NONE', #980, #759 ) ; +#764 = AXIS2_PLACEMENT_3D ( 'NONE', #1003, #903, #900 ) ; +#765 = FACE_OUTER_BOUND ( 'NONE', #874, .T. ) ; +#766 = ADVANCED_FACE ( 'NONE', ( #536 ), #602, .T. ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 4.040059887908753900 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705900600, 28.42524458648364300, -17.35000000000000100 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( -49.02337860674643400, 22.85997687295763100, -25.39999999999999900 ) ) ; +#770 = EDGE_CURVE ( 'NONE', #245, #976, #357, .T. ) ; +#771 = CIRCLE ( 'NONE', #385, 1.750000000000001100 ) ; +#772 = CIRCLE ( 'NONE', #330, 3.550000000000003400 ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( -52.50977622227517800, 31.70528040761203700, -15.07401727822997700 ) ) ; +#774 = CIRCLE ( 'NONE', #278, 1.750000000000001100 ) ; +#775 = CIRCLE ( 'NONE', #233, 3.550000000000003400 ) ; +#776 = CIRCLE ( 'NONE', #184, 1.750000000000001100 ) ; +#777 = ORIENTED_EDGE ( 'NONE', *, *, #507, .F. ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( -60.66646704698400300, 30.17952615255436300, -14.47206829874420100 ) ) ; +#779 = LINE ( 'NONE', #769, #781 ) ; +#780 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ; +#781 = VECTOR ( 'NONE', #466, 1000.000000000000100 ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -62.60311329094549400, 29.47455343918603900, -17.26896523098252300 ) ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999998300, 31.75000000000000000, -16.74005988790871400 ) ) ; +#784 = AXIS2_PLACEMENT_3D ( 'NONE', #101, #1091, #1106 ) ; +#785 = CIRCLE ( 'NONE', #80, 31.75000000000000000 ) ; +#786 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #64, #202, #154, #57 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#787 = CIRCLE ( 'NONE', #135, 3.550000000000003400 ) ; +#788 = CYLINDRICAL_SURFACE ( 'NONE', #1069, 31.75000000000000000 ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( -56.45695018187900200, -30.96908455481847300, -20.88901120932802500 ) ) ; +#790 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#791 = CIRCLE ( 'NONE', #18, 1.750000000000001100 ) ; +#792 = FACE_OUTER_BOUND ( 'NONE', #958, .T. ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, -129.5477436145402200 ) ) ; +#794 = CIRCLE ( 'NONE', #853, 3.550000000000003400 ) ; +#795 = FACE_OUTER_BOUND ( 'NONE', #929, .T. ) ; +#796 = EDGE_CURVE ( 'NONE', #971, #887, #279, .T. ) ; +#797 = ORIENTED_EDGE ( 'NONE', *, *, #6, .T. ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( -46.10440131359514700, -29.11974387893085500, 12.69999999999999200 ) ) ; +#799 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#800 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -17.95994011209128900 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, -25.39999999999999900 ) ) ; +#802 = CIRCLE ( 'NONE', #934, 19.04999999999999700 ) ; +#803 = AXIS2_PLACEMENT_3D ( 'NONE', #1016, #920, #412 ) ; +#804 = CIRCLE ( 'NONE', #784, 1.750000000000001100 ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -55.75026734667640900, -31.11222060760134800, 8.105322673640019500 ) ) ; +#806 = VERTEX_POINT ( 'NONE', #949 ) ; +#807 = FACE_OUTER_BOUND ( 'NONE', #960, .T. ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( -62.44054660075849500, 29.53917466561535600, 5.595697206715015200 ) ) ; +#809 = CIRCLE ( 'NONE', #718, 1.750000000000001100 ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( -61.90221523795602800, -29.74600826642441100, 6.543342384111556800 ) ) ; +#811 = CIRCLE ( 'NONE', #521, 6.350000000000001400 ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( -61.22638780860153700, 29.98953393920937700, 2.130213573561255300 ) ) ; +#813 = EDGE_CURVE ( 'NONE', #876, #940, #250, .T. ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( -53.44158872955443900, 31.64148051630071700, 1.922866951181801700 ) ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( -55.98222292283755100, 31.06535431335478800, 8.135922774189330300 ) ) ; +#816 = VECTOR ( 'NONE', #1006, 1000.000000000000000 ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( -50.63303190730581300, 31.75000000000000700, 4.855349149155469700 ) ) ; +#818 = VECTOR ( 'NONE', #296, 1000.000000000000000 ) ; +#819 = STYLED_ITEM ( 'NONE', ( #444 ), #991 ) ; +#820 = LINE ( 'NONE', #161, #816 ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216530800, 29.69386953851234500, 6.349999999999992500 ) ) ; +#822 = VECTOR ( 'NONE', #147, 1000.000000000000000 ) ; +#823 = EDGE_CURVE ( 'NONE', #1021, #84, #599, .T. ) ; +#824 = CIRCLE ( 'NONE', #353, 31.75000000000000000 ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, 5.259940112091703300 ) ) ; +#826 = VECTOR ( 'NONE', #355, 1000.000000000000000 ) ; +#827 = PLANE ( 'NONE', #32 ) ; +#828 = VERTEX_POINT ( 'NONE', #78 ) ; +#829 = AXIS2_PLACEMENT_3D ( 'NONE', #334, #329, #325 ) ; +#830 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406983900, 5.551115123125782100E-017 ) ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( -62.53654435302276200, -29.50116424380046700, 5.262113867882114900 ) ) ; +#832 = LINE ( 'NONE', #217, #822 ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( -61.08790196861920000, -30.03737597502545100, 2.033252659427253800 ) ) ; +#834 = CIRCLE ( 'NONE', #247, 25.39999999999999100 ) ; +#835 = EDGE_CURVE ( 'NONE', #971, #125, #538, .T. ) ; +#836 = LINE ( 'NONE', #535, #818 ) ; +#837 = LINE ( 'NONE', #230, #826 ) ; +#838 = FACE_BOUND ( 'NONE', #1024, .T. ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( -52.81469432481250700, -31.68757306985052600, 2.212160145501596900 ) ) ; +#840 = VERTEX_POINT ( 'NONE', #301 ) ; +#841 = ORIENTED_EDGE ( 'NONE', *, *, #1165, .T. ) ; +#842 = ORIENTED_EDGE ( 'NONE', *, *, #173, .T. ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -53.44115079051135100, -31.64150143057837300, -14.62312163951611900 ) ) ; +#844 = DIRECTION ( 'NONE', ( -0.4226182617406985500, -0.9063077870366502700, 0.0000000000000000000 ) ) ; +#845 = AXIS2_PLACEMENT_3D ( 'NONE', #305, #977, #388 ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( -61.22556241199193000, -29.98982284393051500, -14.82958337240836700 ) ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ; +#848 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -53.44543607623847200, 25.20785194250351700, -17.35000000000000100 ) ) ; +#850 = ORIENTED_EDGE ( 'NONE', *, *, #823, .F. ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( -62.56961945221449600, -29.48794464352129900, -17.78983495389576700 ) ) ; +#852 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ; +#853 = AXIS2_PLACEMENT_3D ( 'NONE', #1013, #1000, #997 ) ; +#854 = VERTEX_POINT ( 'NONE', #969 ) ; +#855 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #968 ) ; +#856 = ADVANCED_FACE ( 'NONE', ( #587 ), #584, .T. ) ; +#857 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ; +#858 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#859 = ORIENTED_EDGE ( 'NONE', *, *, #916, .T. ) ; +#860 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ; +#861 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -17.95994011209128900 ) ) ; +#863 = DIRECTION ( 'NONE', ( -0.9063077870366504900, 0.4226182617406983900, 5.551115123125782700E-017 ) ) ; +#864 = EDGE_CURVE ( 'NONE', #978, #500, #209, .T. ) ; +#865 = ADVANCED_FACE ( 'NONE', ( #581 ), #577, .T. ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999998300, 31.75000000000000000, -16.74005988790871400 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705899100, 28.42524458648362900, -17.35000000000000100 ) ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ; +#869 = EDGE_LOOP ( 'NONE', ( #1030, #861, #1112, #634, #933, #842, #52, #359 ) ) ; +#870 = VERTEX_POINT ( 'NONE', #85 ) ; +#871 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ; +#872 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( -59.47304431693442000, 30.34461489062027100, -20.59770495332797300 ) ) ; +#874 = EDGE_LOOP ( 'NONE', ( #526, #544, #877, #777, #860, #797 ) ) ; +#875 = AXIS2_PLACEMENT_3D ( 'NONE', #424, #515, #1023 ) ; +#876 = VERTEX_POINT ( 'NONE', #170 ) ; +#877 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( -79.13437485815850900, 41.10379243870458100, 4.650000000000001200 ) ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -25.39999999999999900, 6.349999999999994300 ) ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( -53.44115079051130100, 31.64150143057838000, -14.62312163951613000 ) ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( -61.22556241199180200, 29.98982284393056100, -14.82958337240827400 ) ) ; +#882 = EDGE_CURVE ( 'NONE', #870, #940, #585, .T. ) ; +#883 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #864, .T. ) ; +#885 = ORIENTED_EDGE ( 'NONE', *, *, #629, .F. ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -62.56961945221449600, 29.48794464352126400, -17.78983495389555000 ) ) ; +#887 = VERTEX_POINT ( 'NONE', #767 ) ; +#888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#889 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #281, #530, #39, #270 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#890 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ; +#891 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( -61.73932200154879300, -29.79739610341742300, -19.41293147832712100 ) ) ; +#893 = DIRECTION ( 'NONE', ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#894 = EDGE_LOOP ( 'NONE', ( #1135, #1139, #1148, #1149, #1155, #451, #453, #1158 ) ) ; +#895 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #819 ) ) ; +#896 = ORIENTED_EDGE ( 'NONE', *, *, #955, .F. ) ; +#897 = EDGE_LOOP ( 'NONE', ( #1029, #1058, #1019 ) ) ; +#898 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( -55.06178002900899300, -31.24990466330250900, -20.68788705127456100 ) ) ; +#900 = DIRECTION ( 'NONE', ( -0.4226182617406983300, -0.9063077870366504900, 0.0000000000000000000 ) ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -25.40000000000000600, 6.349999999999999600 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143153100, 31.75000000000000700, 6.349999999999994300 ) ) ; +#903 = DIRECTION ( 'NONE', ( 0.9063077870366504900, -0.4226182617406983300, -5.551115123125782700E-017 ) ) ; +#904 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #108 ) ; +#905 = AXIS2_PLACEMENT_3D ( 'NONE', #879, #790, #893 ) ; +#906 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ; +#908 = DIRECTION ( 'NONE', ( 0.4226182617406969400, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#909 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ; +#910 = EDGE_LOOP ( 'NONE', ( #318 ) ) ; +#911 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ; +#912 = DIRECTION ( 'NONE', ( -0.4226182617406983300, 0.9063077870366504900, 0.0000000000000000000 ) ) ; +#913 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ; +#914 = EDGE_LOOP ( 'NONE', ( #248, #272, #293 ) ) ; +#915 = DIRECTION ( 'NONE', ( -0.9063077870366504900, -0.4226182617406983300, 0.0000000000000000000 ) ) ; +#916 = EDGE_CURVE ( 'NONE', #971, #469, #181, .T. ) ; +#917 = ORIENTED_EDGE ( 'NONE', *, *, #744, .F. ) ; +#918 = CARTESIAN_POINT ( 'NONE', ( -56.44968514579494500, -30.97045345691404000, 8.179964051772072900 ) ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( -62.56904337654878400, 29.48817464390930400, 5.092705003553604100 ) ) ; +#920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -60.66261374836228300, 30.18080316317694300, 1.769905158299356100 ) ) ; +#922 = EDGE_LOOP ( 'NONE', ( #1078, #1176, #917, #995, #1038, #852, #847, #848 ) ) ; +#923 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #465, #653 ) ; +#924 = ORIENTED_EDGE ( 'NONE', *, *, #796, .F. ) ; +#925 = DIRECTION ( 'NONE', ( -0.9063077870366506000, -0.4226182617406983300, 0.0000000000000000000 ) ) ; +#926 = EDGE_LOOP ( 'NONE', ( #346, #360, #370, #381, #454, #503 ) ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( -52.50836656925137900, 31.70535843785587100, 2.374791279330458400 ) ) ; +#929 = EDGE_LOOP ( 'NONE', ( #165, #204, #226 ) ) ; +#930 = EDGE_LOOP ( 'NONE', ( #514, #314, #284, #214 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( -56.68596051205635400, 30.92225975342948600, 8.193380851080316800 ) ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ; +#933 = ORIENTED_EDGE ( 'NONE', *, *, #938, .T. ) ; +#934 = AXIS2_PLACEMENT_3D ( 'NONE', #677, #671, #590 ) ; +#935 = DIRECTION ( 'NONE', ( 0.4226182617406971100, 0.9063077870366510500, 0.0000000000000000000 ) ) ; +#936 = VERTEX_POINT ( 'NONE', #237 ) ; +#937 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#938 = EDGE_CURVE ( 'NONE', #379, #1154, #573, .T. ) ; +#939 = VERTEX_POINT ( 'NONE', #240 ) ; +#940 = VERTEX_POINT ( 'NONE', #979 ) ; +#941 = EDGE_LOOP ( 'NONE', ( #1180, #13, #65, #69, #88, #98, #115, #138 ) ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( -53.55491754192967600, 24.97306818166120100, 3.002671082198547600E-015 ) ) ; +#943 = CARTESIAN_POINT ( 'NONE', ( -62.60256539681008500, -29.47477355100126000, 4.748551403171382500 ) ) ; +#944 = EDGE_LOOP ( 'NONE', ( #316 ) ) ; +#945 = EDGE_LOOP ( 'NONE', ( #730, #898, #615, #542 ) ) ; +#946 = EDGE_LOOP ( 'NONE', ( #261, #231, #71, #66 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -129.5477436145402200 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( -60.36356478727272900, -30.27716852836124100, 1.628206687462441200 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054226300, 31.73794059669041100, 6.349999999999995200 ) ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( -51.92321886288277000, -31.73147726460146600, 2.747081839164824000 ) ) ; +#951 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -54.73062607156874300, -31.51247895067408300, -14.16624945260924800 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -17.95994011209126000 ) ) ; +#954 = EDGE_LOOP ( 'NONE', ( #1152, #1142, #1136, #1126 ) ) ; +#955 = EDGE_CURVE ( 'NONE', #978, #870, #157, .T. ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( -51.20555928901278300, -30.01128321379778200, -17.35000000000000100 ) ) ; +#958 = EDGE_LOOP ( 'NONE', ( #850, #841, #962, #956, #89, #572 ) ) ; +#959 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#960 = EDGE_LOOP ( 'NONE', ( #1028, #28, #516, #1175 ) ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( -61.61297204546991700, -29.85225881524447500, -15.15298455013758200 ) ) ; +#962 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#963 = EDGE_LOOP ( 'NONE', ( #1051 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( -53.44543607623847200, 25.20785194250351700, 4.650000000000001200 ) ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( -62.44168050716086800, -29.53872685742344100, -18.29224726119217300 ) ) ; +#966 = ADVANCED_FACE ( 'NONE', ( #597, #595 ), #566, .F. ) ; +#967 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #819 ), #1037 ) ; +#968 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576700, 25.40000000000000600, 12.69999999999999900 ) ) ; +#970 = EDGE_LOOP ( 'NONE', ( #1042, #1014, #1005, #1012 ) ) ; +#971 = VERTEX_POINT ( 'NONE', #623 ) ; +#972 = ADVANCED_FACE ( 'NONE', ( #580, #565 ), #554, .F. ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ; +#975 = ORIENTED_EDGE ( 'NONE', *, *, #126, .T. ) ; +#976 = VERTEX_POINT ( 'NONE', #179 ) ; +#977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#978 = VERTEX_POINT ( 'NONE', #783 ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235600, -19.04999999999999700 ) ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -129.5477436145402200 ) ) ; +#981 = EDGE_CURVE ( 'NONE', #940, #245, #110, .T. ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( -54.73062607156868600, 31.51247895067408300, -14.16624945260927300 ) ) ; +#983 = EDGE_LOOP ( 'NONE', ( #1159, #1173, #407 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -19.05000000000000800, 12.69999999999999900 ) ) ; +#985 = EDGE_LOOP ( 'NONE', ( #973 ) ) ; +#986 = ORIENTED_EDGE ( 'NONE', *, *, #1094, .F. ) ; +#987 = EDGE_LOOP ( 'NONE', ( #951 ) ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( -61.61297204546977500, 29.85225881524450700, -15.15298455013746600 ) ) ; +#989 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ; +#990 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #637 ) ) ; +#991 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Clamp_3', ( #1034, #44 ), #376 ) ; +#992 = EDGE_LOOP ( 'NONE', ( #1131 ) ) ; +#993 = EDGE_LOOP ( 'NONE', ( #1104, #1085, #1092, #430, #1077, #1036 ) ) ; +#994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#995 = ORIENTED_EDGE ( 'NONE', *, *, #724, .T. ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( -62.44168050716090300, 29.53872685742340900, -18.29224726119197400 ) ) ; +#997 = DIRECTION ( 'NONE', ( -0.4226182617406985500, 0.9063077870366502700, 0.0000000000000000000 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( -61.18932296733751700, -29.95021314258234900, -19.85204871162760300 ) ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235200, 6.349999999999991700 ) ) ; +#1000 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406983900, -5.551115123125782700E-017 ) ) ; +#1001 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( -53.94348844985399400, -31.46042980632916300, -20.34855914771191700 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( -53.55491754192967600, 24.97306818166120100, 3.002671082198547600E-015 ) ) ; +#1004 = EDGE_LOOP ( 'NONE', ( #1001 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #724, .F. ) ; +#1006 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1008 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ; +#1009 = VERTEX_POINT ( 'NONE', #102 ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, 31.75000000000000000, -17.95994011209128900 ) ) ; +#1011 = EDGE_CURVE ( 'NONE', #379, #1056, #567, .T. ) ; +#1012 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( -51.94514124705899100, -28.42524458648362900, -17.35000000000000100 ) ) ; +#1014 = ORIENTED_EDGE ( 'NONE', *, *, #770, .T. ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, 6.349999999999994300 ) ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#1017 = EDGE_LOOP ( 'NONE', ( #859, #868, #927, #924 ) ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( -57.39028525486474300, -30.77825872387945700, 8.207473966361314800 ) ) ; +#1019 = ORIENTED_EDGE ( 'NONE', *, *, #37, .T. ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( -62.60327297919388200, 29.47448951098219500, 4.571695168884810200 ) ) ; +#1021 = VERTEX_POINT ( 'NONE', #578 ) ; +#1022 = EDGE_LOOP ( 'NONE', ( #913 ) ) ; +#1023 = DIRECTION ( 'NONE', ( -0.4226182617406978900, -0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1024 = EDGE_LOOP ( 'NONE', ( #932 ) ) ; +#1025 = ORIENTED_EDGE ( 'NONE', *, *, #150, .T. ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( -59.74006670608321200, 30.46709557581641900, 1.397479472242066900 ) ) ; +#1027 = EDGE_CURVE ( 'NONE', #978, #1105, #568, .T. ) ; +#1028 = ORIENTED_EDGE ( 'NONE', *, *, #938, .F. ) ; +#1029 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ; +#1030 = ORIENTED_EDGE ( 'NONE', *, *, #1147, .F. ) ; +#1031 = DIRECTION ( 'NONE', ( 0.9063077870366510500, -0.4226182617406971100, 0.0000000000000000000 ) ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( -51.64796316702327100, 31.73962682479964000, 2.953371230213226900 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( -57.85625387826695500, 30.68265182470987500, 8.182861958120758700 ) ) ; +#1034 = MANIFOLD_SOLID_BREP ( 'Mirror1', #1118 ) ; +#1035 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1036 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ; +#1037 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #35 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #959, #374, #1062 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ; +#1039 = PLANE ( 'NONE', #1086 ) ; +#1040 = EDGE_LOOP ( 'NONE', ( #974 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( -47.83894637071576000, -25.40000000000000600, 12.69999999999999900 ) ) ; +#1042 = ORIENTED_EDGE ( 'NONE', *, *, #981, .T. ) ; +#1043 = EDGE_LOOP ( 'NONE', ( #1025 ) ) ; +#1044 = DIRECTION ( 'NONE', ( -0.9063077870366504900, 0.4226182617406983900, 5.551115123125782100E-017 ) ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #126, .F. ) ; +#1046 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #482, #463 ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( -62.57192478331946700, -29.48702378759574600, 4.225251844656627400 ) ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( -51.02200406076234900, -31.74958011236125800, -18.37891642743213800 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( -59.41410336200076600, -30.56099656594760100, 1.308774184696016600 ) ) ; +#1050 = EDGE_CURVE ( 'NONE', #245, #1107, #499, .T. ) ; +#1051 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ; +#1052 = EDGE_LOOP ( 'NONE', ( #989 ) ) ; +#1053 = EDGE_LOOP ( 'NONE', ( #907 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, 6.349999999999994300 ) ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( -51.27922311436104500, -31.74662121130696200, 3.313918886200910100 ) ) ; +#1056 = VERTEX_POINT ( 'NONE', #902 ) ; +#1057 = VERTEX_POINT ( 'NONE', #27 ) ; +#1058 = ORIENTED_EDGE ( 'NONE', *, *, #1166, .T. ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( -56.74664120730051300, -31.19555945801245000, -13.81035497004029900 ) ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #100, .T. ) ; +#1061 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #1083, #471 ) ; +#1062 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1063 = CARTESIAN_POINT ( 'NONE', ( -61.95194992300320500, -29.72721701348454800, -15.52503773693177400 ) ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( -46.67402035382948400, -27.89819190509426200, 4.650000000000002100 ) ) ; +#1065 = ADVANCED_FACE ( 'NONE', ( #495 ), #501, .T. ) ; +#1066 = EDGE_LOOP ( 'NONE', ( #1167, #986, #857, #140 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( -62.22743245764427700, -29.62233780639994400, -18.76376664399769100 ) ) ; +#1068 = ORIENTED_EDGE ( 'NONE', *, *, #150, .F. ) ; +#1069 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #249, #667 ) ; +#1070 = EDGE_LOOP ( 'NONE', ( #392 ) ) ; +#1071 = ORIENTED_EDGE ( 'NONE', *, *, #1094, .T. ) ; +#1072 = VERTEX_POINT ( 'NONE', #801 ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -6.221205739668553700E-015, -129.5477436145402200 ) ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( -57.85885303242656600, 30.68211831592098800, -20.88269210027534900 ) ) ; +#1075 = ADVANCED_FACE ( 'NONE', ( #493, #491, #489 ), #502, .F. ) ; +#1076 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .F. ) ; +#1077 = ORIENTED_EDGE ( 'NONE', *, *, #1165, .F. ) ; +#1078 = ORIENTED_EDGE ( 'NONE', *, *, #835, .F. ) ; +#1079 = EDGE_CURVE ( 'NONE', #259, #1056, #481, .T. ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( -60.57986132256662900, 30.10133385977629300, -20.21213584889164800 ) ) ; +#1081 = EDGE_LOOP ( 'NONE', ( #885 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #955, .T. ) ; +#1083 = DIRECTION ( 'NONE', ( 0.9063077870366504900, 0.4226182617406982800, 0.0000000000000000000 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( -51.67500096054227000, 31.73794059669041100, -19.04999999999999700 ) ) ; +#1085 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ; +#1086 = AXIS2_PLACEMENT_3D ( 'NONE', #276, #46, #618 ) ; +#1087 = EDGE_LOOP ( 'NONE', ( #906 ) ) ; +#1088 = ORIENTED_EDGE ( 'NONE', *, *, #882, .T. ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( -56.74664120730041400, 31.19555945801245800, -13.81035497004030600 ) ) ; +#1090 = EDGE_LOOP ( 'NONE', ( #890 ) ) ; +#1091 = DIRECTION ( 'NONE', ( -0.9063077870366510500, 0.4226182617406971100, 0.0000000000000000000 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .T. ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( -61.95194992300309900, 29.72721701348458400, -15.52503773693163700 ) ) ; +#1094 = EDGE_CURVE ( 'NONE', #443, #1105, #22, .T. ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.69999999999999900 ) ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143154500, 31.75000000000000700, -129.5477436145402200 ) ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( -50.89050961689429200, 31.74999999999999300, -18.17925969862655200 ) ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( -62.22743245764436200, 29.62233780639989400, -18.76376664399749200 ) ) ; +#1099 = EDGE_LOOP ( 'NONE', ( #975 ) ) ; +#1100 = EDGE_LOOP ( 'NONE', ( #1008 ) ) ; +#1101 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( -60.14697583417542100, -30.19847472468718100, -20.39016067940265500 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( -51.02200406076234200, 31.74958011236125100, -18.37891642743215600 ) ) ; +#1104 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ; +#1105 = VERTEX_POINT ( 'NONE', #717 ) ; +#1106 = DIRECTION ( 'NONE', ( 0.4226182617406978900, 0.9063077870366506000, 0.0000000000000000000 ) ) ; +#1107 = VERTEX_POINT ( 'NONE', #203 ) ; +#1108 = FACE_OUTER_BOUND ( 'NONE', #1022, .T. ) ; +#1109 = EDGE_LOOP ( 'NONE', ( #896, #884, #871, #909 ) ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( -53.28865388289673200, -31.57060362461225400, -20.07314853153579300 ) ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( -51.32280300930662500, 31.74605172502086600, -18.73875889090943800 ) ) ; +#1112 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .T. ) ; +#1113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000000, 10.06974387893084000 ) ) ; +#1115 = FILL_AREA_STYLE_COLOUR ( '', #549 ) ; +#1116 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #693, #601 ) ; +#1117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1118 = CLOSED_SHELL ( 'NONE', ( #856, #382, #1065, #550, #766, #79, #457, #1075, #169, #1178, #648, #83, #234, #299, #865, #163, #304, #652, #1172, #464, #966, #2, #302, #752, #972, #229, #387, #758, #659, #558 ) ) ; +#1119 = EDGE_LOOP ( 'NONE', ( #1045 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( -52.44393399730239500, -31.68851797234175600, 6.921822753649919900 ) ) ; +#1121 = EDGE_LOOP ( 'NONE', ( #1060, #1071, #1076, #1082, #1088, #1101, #1125, #414 ) ) ; +#1122 = EDGE_LOOP ( 'NONE', ( #1068 ) ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216530800, 29.69386953851234500, 6.349999999999992500 ) ) ; +#1124 = EDGE_CURVE ( 'NONE', #1107, #1072, #479, .T. ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #744, .T. ) ; +#1126 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( -58.78058895059038500, -30.49116764328148900, 8.063578432810393400 ) ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( -62.54037397507021700, 29.49963814600082300, 4.055428113222455400 ) ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( -58.75998466297749400, 30.73785828583793700, 1.180209703662129300 ) ) ; +#1130 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #399, #483 ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( -53.06661942115134400, 31.60444668652684200, 7.263968553914931000 ) ) ; +#1133 = EDGE_LOOP ( 'NONE', ( #911 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( -51.16360013252493400, 31.74808756259108500, 3.442973667484651400 ) ) ; +#1135 = ORIENTED_EDGE ( 'NONE', *, *, #37, .F. ) ; +#1136 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( -59.24077973538434300, 30.39494812977944300, 7.968820446989531600 ) ) ; +#1138 = EDGE_LOOP ( 'NONE', ( #891 ) ) ; +#1139 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( -44.87789274143152300, -31.75000000000000700, -19.04999999999999700 ) ) ; +#1141 = AXIS2_PLACEMENT_3D ( 'NONE', #1095, #888, #883 ) ; +#1142 = ORIENTED_EDGE ( 'NONE', *, *, #823, .T. ) ; +#1143 = DIRECTION ( 'NONE', ( -0.9063077870366506000, -0.4226182617406983300, 0.0000000000000000000 ) ) ; +#1144 = DIRECTION ( 'NONE', ( -0.4226182617406969400, 0.9063077870366511600, 0.0000000000000000000 ) ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( -58.78364246170258400, 30.49027140462256500, -20.75402014566690000 ) ) ; +#1146 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235200, 6.349999999999991700 ) ) ; +#1147 = EDGE_CURVE ( 'NONE', #936, #1105, #320, .T. ) ; +#1148 = ORIENTED_EDGE ( 'NONE', *, *, #100, .F. ) ; +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ; +#1150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( -62.44681357581760800, -29.53670200529580500, 3.722274370346839900 ) ) ; +#1152 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ; +#1153 = VERTEX_POINT ( 'NONE', #1140 ) ; +#1154 = VERTEX_POINT ( 'NONE', #277 ) ; +#1155 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( -50.79999999999999700, -31.75000000000000700, -17.95994011209126000 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( -58.42928210273824200, -30.82165363782739600, 1.139294551226382300 ) ) ; +#1158 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ; +#1159 = ORIENTED_EDGE ( 'NONE', *, *, #266, .T. ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( -50.95531710975500800, -31.74978340451972500, -16.42825260475878900 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( -57.39328063081379800, 30.77764324040066100, -20.90731918508771200 ) ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( -50.95606009196069400, -31.74978604945272300, 3.726725090135417900 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( -58.42920177356785400, -30.82170681265073500, -13.83917026220113700 ) ) ; +#1164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1165 = EDGE_CURVE ( 'NONE', #1021, #854, #476, .T. ) ; +#1166 = EDGE_CURVE ( 'NONE', #936, #806, #518, .T. ) ; +#1167 = ORIENTED_EDGE ( 'NONE', *, *, #1147, .T. ) ; +#1168 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.365923996832131600E-016, 0.0000000000000000000 ) ) ; +#1169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( -62.23570762911555200, -29.61913999858465000, -15.95122207385995400 ) ) ; +#1171 = VERTEX_POINT ( 'NONE', #1041 ) ; +#1172 = ADVANCED_FACE ( 'NONE', ( #477, #468 ), #462, .F. ) ; +#1173 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ; +#1174 = FILL_AREA_STYLE_COLOUR ( '', #534 ) ; +#1175 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #796, .T. ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( -62.03995604216532200, -29.69386953851235600, -19.04999999999999700 ) ) ; +#1178 = ADVANCED_FACE ( 'NONE', ( #473 ), #294, .F. ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -52.04892261766627800, 31.72763174227206300, -19.35682582900587400 ) ) ; +#1180 = ORIENTED_EDGE ( 'NONE', *, *, #882, .F. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Adjust.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Adjust.step new file mode 100644 index 0000000..d2c236d --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Adjust.step @@ -0,0 +1,4428 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Rear_Adjust.step', + '2016-04-19T10:44:34', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 11.56666666666666800 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 56.40000000000002000 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 25.39999999999999900 ) ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 19.06666666666666600 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 43.06666666666667700 ) ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 37.23333333333333400 ) ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 25.73333333333333400 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 57.56666666666666300 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 10.23333333333333800 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 54.23333333333336300 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 27.23333333333333400 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 54.56666666666666300 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 28.06666666666666600 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 13.73333333333332500 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 58.56666666666667000 ) ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 17.39999999999999500 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 21.23333333333333400 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 45.23333333333334100 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 39.39999999999999900 ) ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 27.89999999999999900 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 59.73333333333332700 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 12.40000000000000400 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 56.40000000000002000 ) ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 25.06666666666666600 ) ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 56.73333333333334100 ) ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 30.23333333333333400 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 15.90000000000000000 ) ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 60.73333333333333400 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 23.40000000000000200 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 47.39999999999999900 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 41.56666666666667000 ) ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 30.06666666666667000 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 61.89999999999999100 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 14.56666666666667000 ) ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 58.56666666666667700 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 22.89999999999999900 ) ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 58.89999999999999100 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 32.39999999999999900 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 18.06666666666666600 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 62.89999999999999900 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 25.56666666666667000 ) ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 49.56666666666667000 ) ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 43.73333333333334100 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 32.23333333333333400 ) ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 64.06666666666666300 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 16.73333333333334100 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 15.39999999999999300 ) ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 60.73333333333333400 ) ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 48.23333333333333400 ) ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 20.73333333333333100 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 70.23333333333334800 ) ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 34.56666666666666300 ) ) ; +#53 = AXIS2_PLACEMENT_3D ( 'NONE', #3263, #3587, #1587 ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 20.23333333333333100 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 65.06666666666666300 ) ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 27.73333333333333100 ) ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 51.73333333333332700 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 45.90000000000000600 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 34.39999999999999900 ) ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 66.23333333333333400 ) ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 18.90000000000001300 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 8.566666666666666400 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 62.90000000000002700 ) ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 50.39999999999999900 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 18.56666666666667000 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 68.06666666666666300 ) ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 24.89999999999999900 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 36.73333333333333400 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 27.39999999999998400 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 22.39999999999998800 ) ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 67.23333333333332000 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 29.89999999999999900 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 53.89999999999999900 ) ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 48.06666666666668400 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 36.56666666666666300 ) ) ; +#76 = VECTOR ( 'NONE', #2814, 1000.000000000000000 ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 68.40000000000000600 ) ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 21.06666666666666600 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 15.23333333333333400 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 65.06666666666669100 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 52.56666666666666300 ) ) ; +#82 = FACE_OUTER_BOUND ( 'NONE', #1553, .T. ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 16.39999999999999900 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 65.90000000000000600 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 27.06666666666666600 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 38.89999999999999900 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 34.06666666666666300 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 24.56666666666666600 ) ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 56.06666666666667700 ) ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 50.23333333333333400 ) ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 38.73333333333332700 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 70.56666666666666300 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 23.23333333333333800 ) ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 8.733333333333327200 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 67.23333333333334800 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 54.73333333333329900 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 14.23333333333333400 ) ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 63.73333333333333400 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 29.23333333333333400 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 41.06666666666667000 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 27.23333333333333400 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 26.73333333333333400 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 58.23333333333332700 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 52.39999999999999900 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 40.90000000000001300 ) ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 72.73333333333333400 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 25.40000000000000900 ) ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 63.73333333333332700 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 15.06666666666667000 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 56.89999999999999900 ) ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 69.23333333333333400 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 12.06666666666666300 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 61.56666666666667000 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 31.39999999999999900 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 43.23333333333333400 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 33.89999999999999900 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 70.73333333333337700 ) ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 28.89999999999999900 ) ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 60.40000000000002000 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 54.56666666666666300 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 43.06666666666667700 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 74.90000000000000600 ) ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 27.56666666666667000 ) ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 65.89999999999999100 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 59.06666666666663400 ) ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 71.40000000000000600 ) ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 9.900000000000000400 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 0.4657711980696812600, -9.079670807658082800, 6.400000000000012800 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 59.39999999999999100 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 33.56666666666666300 ) ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 45.39999999999996300 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 72.90000000000004800 ) ) ; +#133 = FACE_OUTER_BOUND ( 'NONE', #1710, .T. ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 31.06666666666665200 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 62.56666666666665600 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 56.73333333333333400 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 45.23333333333334100 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 77.06666666666667700 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 29.73333333333333400 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 68.06666666666667700 ) ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 61.23333333333333400 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 7.233333333333336100 ) ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 73.56666666666666300 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 57.23333333333332700 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 35.73333333333333400 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 75.06666666666670600 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 64.73333333333332000 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 58.90000000000001300 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 47.39999999999999900 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 79.23333333333333400 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 31.90000000000001300 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 70.23333333333332000 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 63.39999999999999900 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 9.400000000000002100 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 75.73333333333332000 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 55.06666666666666300 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 37.89999999999999100 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( -8.105186785677805300, -0.04564913830038807400, 75.89999999999993500 ) ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 66.90000000000000600 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 61.06666666666666300 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 49.56666666666666300 ) ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 34.06666666666668400 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 72.40000000000000600 ) ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 65.56666666666666300 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 11.56666666666666600 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 77.89999999999999100 ) ) ; +#168 = PLANE ( 'NONE', #656 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 60.06666666666667000 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 52.90000000000001300 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 40.06666666666667000 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( -8.135498625934920000, -3.501604764520564600, 75.90000000000000600 ) ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 69.06666666666667700 ) ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 51.73333333333332700 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 36.23333333333336300 ) ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 74.56666666666664900 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 67.73333333333334800 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 13.73333333333333800 ) ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 62.23333333333333400 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 39.40000000000000600 ) ) ; +#183 = ORIENTED_EDGE ( 'NONE', *, *, #1967, .T. ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 50.73333333333334800 ) ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 42.23333333333334100 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( -4.164379999313098300, -8.295814131867286900, 75.89999999999938000 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 71.23333333333333400 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 53.89999999999999900 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 38.40000000000002000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 76.73333333333333400 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 69.90000000000000600 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 15.90000000000000000 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 10.06666666666666600 ) ) ; +#194 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 64.39999999999997700 ) ) ; +#196 = AXIS2_PLACEMENT_3D ( 'NONE', #2925, #224, #3575 ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 48.56666666666666300 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 44.39999999999999900 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 2.435821532384946100, -9.146310151682113700, 75.90000000000006300 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 73.39999999999999100 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 33.23333333333333400 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 56.06666666666667700 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 40.56666666666667000 ) ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 6.733333333333334300 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 25.23333333333333400 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 72.06666666666669100 ) ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 18.06666666666666600 ) ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 12.23333333333333400 ) ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -6.000000000000000000 ) ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 66.56666666666666300 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 3.066873848891504800, -8.321311416964739700, 6.400000000000008300 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 46.39999999999999900 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 46.56666666666667000 ) ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 8.120526185991831600, -4.920450655874024200, 75.90000000000000600 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 75.56666666666667700 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 35.39999999999997000 ) ) ; +#217 = AXIS2_PLACEMENT_3D ( 'NONE', #238, #2606, #582 ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 58.23333333333332700 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 8.900000000000002100 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 25.06666666666667400 ) ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 74.23333333333333400 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 20.23333333333333800 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 14.40000000000000200 ) ) ; +#224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 68.73333333333333400 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 2.445640525723201000, -8.603010685104598200, 6.400000000000008300 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 44.23333333333333400 ) ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( 9.041585194877741900, 2.523055138155622300, 75.89999999999999100 ) ) ; +#229 = CIRCLE ( 'NONE', #1656, 1.499999999999999600 ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 8.566666666666666400 ) ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 37.56666666666666300 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 60.39999999999999900 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 11.06666666666666800 ) ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 41.56666666666667000 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 76.39999999999994900 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 22.39999999999999900 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 16.56666666666666600 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 70.90000000000000600 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 2.019594211355742800, -8.752735459922297100, 6.399999999999999500 ) ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 42.06666666666665600 ) ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 3.493686797347038000, 8.137783558387724300, 75.89999999999997700 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 10.73333333333333400 ) ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 39.73333333333332700 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 62.56666666666665600 ) ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 13.23333333333333300 ) ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 43.73333333333333400 ) ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 6.400000000000002100 ) ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 24.56666666666666600 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 18.73333333333333800 ) ) ; +#251 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 73.06666666666666300 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 41.56666666666668400 ) ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 39.90000000000000600 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( -3.971462203967552100E-013, 8.029158559418052100, 75.90000000000003400 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 12.90000000000000000 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 41.89999999999999100 ) ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 64.73333333333334800 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 15.39999999999999300 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 45.89999999999999900 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 24.89999999999999900 ) ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 8.566666666666666400 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 32.56666666666667000 ) ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 26.73333333333333100 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 20.90000000000000200 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306700, -2.000000000000000000, -6.000000000000000000 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 75.23333333333333400 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( -0.2159944341772402900, -9.140845756652577600, 6.400000000000013700 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 43.73333333333332700 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 37.73333333333333400 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 74.40000000000000600 ) ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 15.06666666666666600 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 44.06666666666667000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 66.90000000000000600 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 17.56666666666666600 ) ) ; +#276 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 75.40000000000000600 ) ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 48.06666666666664200 ) ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 10.73333333333333400 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 34.73333333333334800 ) ) ; +#280 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 28.90000000000000600 ) ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 23.06666666666666600 ) ) ; +#282 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#283 = AXIS2_PLACEMENT_3D ( 'NONE', #2251, #2594, #569 ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 77.39999999999993500 ) ) ; +#285 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 45.90000000000002000 ) ) ; +#287 = LINE ( 'NONE', #3439, #76 ) ; +#288 = FACE_BOUND ( 'NONE', #1980, .T. ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 35.56666666666666300 ) ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 72.23333333333333400 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 38.56666666666666300 ) ) ; +#292 = FACE_OUTER_BOUND ( 'NONE', #1549, .T. ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 48.73333333333333400 ) ) ; +#294 = ORIENTED_EDGE ( 'NONE', *, *, #2470, .F. ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 17.23333333333333400 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 46.23333333333333400 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 69.06666666666667700 ) ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 19.73333333333333800 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 77.56666666666664900 ) ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 50.23333333333334800 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 12.90000000000000000 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 36.90000000000000600 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 31.06666666666667400 ) ) ; +#304 = FILL_AREA_STYLE ('',( #2983 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 19.56666666666666600 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 79.56666666666667700 ) ) ; +#307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 48.06666666666667000 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 33.39999999999999900 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 50.89999999999999900 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 48.39999999999997000 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 71.23333333333333400 ) ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 21.89999999999999900 ) ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 79.73333333333337700 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 52.39999999999998400 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 15.06666666666666300 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 39.06666666666666300 ) ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 33.23333333333333400 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 21.73333333333333800 ) ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 53.56666666666667000 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( -8.029596713159469000, -1.993463454001026000E-013, 75.90000000000000600 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 50.23333333333335600 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 31.23333333333333100 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 50.56666666666666300 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 73.40000000000000600 ) ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 24.06666666666665200 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 9.733333333333325400 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 54.56666666666666300 ) ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 24.73333333333333100 ) ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 17.23333333333333400 ) ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 41.23333333333333400 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 35.39999999999999900 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 23.90000000000000200 ) ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 55.73333333333333400 ) ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 8.400000000000003900 ) ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 52.40000000000000600 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 29.06666666666665900 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 38.23333333333333400 ) ) ; +#339 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 52.73333333333332700 ) ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 26.23333333333333400 ) ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #2499, .T. ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 11.90000000000000000 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 56.73333333333334100 ) ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 24.56666666666666600 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 19.39999999999999900 ) ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 43.39999999999999900 ) ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 37.56666666666666300 ) ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #2554, .T. ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 26.06666666666667000 ) ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 57.89999999999999900 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 10.56666666666667000 ) ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 54.56666666666669100 ) ) ; +#353 = VERTEX_POINT ( 'NONE', #2332 ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 26.89999999999999900 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 54.90000000000000600 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 28.40000000000000200 ) ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 14.06666666666666800 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 58.89999999999999100 ) ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 24.39999999999998800 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 21.56666666666667400 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 45.56666666666666300 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 39.73333333333334800 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 28.23333333333333100 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 60.06666666666668400 ) ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 12.73333333333333600 ) ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 56.73333333333332000 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 24.73333333333333800 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 57.06666666666667000 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 30.56666666666667000 ) ) ; +#370 = AXIS2_PLACEMENT_3D ( 'NONE', #1561, #3897, #1905 ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 16.23333333333333400 ) ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 61.06666666666665600 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 23.73333333333334100 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 47.73333333333334100 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 41.89999999999999900 ) ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 30.40000000000000200 ) ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 62.23333333333333400 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 14.90000000000000400 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 14.90000000000000000 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 58.90000000000000600 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 22.56666666666666600 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 59.23333333333333400 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 32.73333333333332700 ) ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 18.40000000000000600 ) ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 63.23333333333333400 ) ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 25.90000000000000200 ) ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 49.90000000000000600 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 44.06666666666666300 ) ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 32.56666666666667000 ) ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 64.40000000000002000 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 17.06666666666667400 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 14.73333333333332700 ) ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 61.06666666666665600 ) ) ; +#394 = ORIENTED_EDGE ( 'NONE', *, *, #2573, .F. ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 48.56666666666667000 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 20.40000000000000200 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 69.90000000000000600 ) ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 34.89999999999999900 ) ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 20.56666666666666600 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 65.40000000000000600 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 28.06666666666666600 ) ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 52.06666666666668400 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 46.23333333333333400 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 34.73333333333335600 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 66.56666666666666300 ) ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 19.23333333333334500 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 14.56666666666666600 ) ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 63.23333333333336300 ) ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 50.73333333333334100 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 18.23333333333333400 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 67.73333333333332000 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 25.23333333333332700 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 37.06666666666667700 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 33.73333333333333400 ) ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 22.73333333333332000 ) ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 67.56666666666666300 ) ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 30.23333333333333400 ) ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 54.23333333333333400 ) ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 48.40000000000000600 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 36.90000000000000600 ) ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 68.73333333333332000 ) ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 21.40000000000000200 ) ) ; +#423 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 14.39999999999999900 ) ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 65.40000000000004800 ) ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 52.90000000000001300 ) ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 16.06666666666666300 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 65.56666666666666300 ) ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 27.40000000000000600 ) ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 39.23333333333333400 ) ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 27.06666666666667400 ) ) ; +#431 = AXIS2_PLACEMENT_3D ( 'NONE', #1532, #2222, #194 ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 24.89999999999999900 ) ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 56.40000000000000600 ) ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 50.56666666666667000 ) ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 39.06666666666666300 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 70.89999999999999100 ) ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 23.56666666666667700 ) ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 67.56666666666669100 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 55.06666666666664200 ) ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 13.90000000000000000 ) ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 63.39999999999999900 ) ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 29.56666666666666600 ) ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 41.39999999999997700 ) ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 33.56666666666667000 ) ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 27.06666666666667400 ) ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 58.56666666666667000 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 52.73333333333334100 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 41.23333333333333400 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 73.06666666666666300 ) ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 25.73333333333333800 ) ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 64.06666666666666300 ) ) ; +#452 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #2580, #553 ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 57.23333333333332700 ) ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 35.06666666666663400 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 69.56666666666666300 ) ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #2470, .T. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 11.73333333333333600 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 61.23333333333333400 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 31.73333333333333400 ) ) ; +#460 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 43.56666666666667000 ) ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 71.06666666666669100 ) ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 29.23333333333333400 ) ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 60.73333333333333400 ) ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 54.89999999999999900 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 43.39999999999999100 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 75.23333333333332000 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 27.90000000000000600 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 66.23333333333332000 ) ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 59.40000000000001300 ) ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 71.73333333333333400 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 9.566666666666668200 ) ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 59.06666666666665600 ) ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 33.89999999999999900 ) ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 45.73333333333330600 ) ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 73.23333333333339100 ) ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 62.89999999999999900 ) ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 57.06666666666667000 ) ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 45.56666666666667000 ) ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 77.39999999999999100 ) ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 30.06666666666667400 ) ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 68.40000000000000600 ) ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 61.56666666666666300 ) ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 7.566666666666668200 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 73.90000000000000600 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 56.89999999999999100 ) ) ; +#486 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 36.06666666666666300 ) ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 75.40000000000003400 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 65.06666666666666300 ) ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 59.23333333333333400 ) ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 47.73333333333334100 ) ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 79.56666666666667700 ) ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 32.23333333333334100 ) ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 70.56666666666666300 ) ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 63.73333333333333400 ) ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 9.733333333333336100 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 76.06666666666663400 ) ) ; +#497 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 54.73333333333331300 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 38.23333333333332700 ) ) ; +#500 = CARTESIAN_POINT ( 'NONE', ( -8.178881281158222500, -0.1360320807250348400, 75.89999999999945100 ) ) ; +#501 = VERTEX_POINT ( 'NONE', #2874 ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 67.23333333333332000 ) ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 61.39999999999999900 ) ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 49.90000000000000600 ) ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 34.40000000000001300 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 72.73333333333333400 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 65.90000000000000600 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 11.90000000000000200 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 78.23333333333333400 ) ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 60.40000000000000600 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 52.56666666666666300 ) ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 40.40000000000000600 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( -7.615294947745400800, -4.762976461557532700, 75.89999999999987800 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 26.89999999999999900 ) ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 69.40000000000000600 ) ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 52.06666666666668400 ) ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 36.56666666666669100 ) ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 74.89999999999999100 ) ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 68.06666666666666300 ) ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 14.06666666666666800 ) ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 8.233333333333334300 ) ) ; +#523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 62.56666666666666300 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -0.6685588351333019400, -9.144694885708327400, 6.400000000000004800 ) ) ; +#526 = AXIS2_PLACEMENT_3D ( 'NONE', #911, #2280, #251 ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 50.39999999999999900 ) ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 42.56666666666667000 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( -3.135750000410106900, -8.775947993347189800, 75.89999999999996300 ) ) ; +#530 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 71.56666666666664900 ) ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 31.39999999999999500 ) ) ; +#532 = AXIS2_PLACEMENT_3D ( 'NONE', #3527, #523, #2886 ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 54.23333333333333400 ) ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 38.73333333333334800 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 4.900000000000000400 ) ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 70.23333333333334800 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 16.23333333333333100 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 10.40000000000000400 ) ) ; +#539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#540 = AXIS2_PLACEMENT_3D ( 'NONE', #3867, #1876, #4222 ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 64.73333333333333400 ) ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 48.23333333333333400 ) ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 44.73333333333334100 ) ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 3.094468281391606000, -8.955405101545450100, 75.90000000000000600 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 73.73333333333333400 ) ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 33.56666666666667000 ) ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 56.40000000000002000 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 40.90000000000001300 ) ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 7.066666666666667300 ) ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 72.40000000000000600 ) ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 18.39999999999999900 ) ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 12.56666666666666800 ) ) ; +#553 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 66.90000000000000600 ) ) ; +#555 = ORIENTED_EDGE ( 'NONE', *, *, #2238, .T. ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 46.06666666666667000 ) ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 46.90000000000000600 ) ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 8.553058367185741400, -4.125141751092218800, 75.89999999999997700 ) ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 75.89999999999997700 ) ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 35.73333333333333400 ) ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 58.56666666666667000 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 9.233333333333332500 ) ) ; +#563 = ORIENTED_EDGE ( 'NONE', *, *, #2554, .F. ) ; +#564 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 39.73333333333332700 ) ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 24.23333333333333100 ) ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 74.56666666666666300 ) ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 20.56666666666667000 ) ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 14.73333333333333400 ) ) ; +#569 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#570 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 69.06666666666667700 ) ) ; +#571 = PLANE ( 'NONE', #1634 ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 43.89999999999999100 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 8.284042997415310700, 4.185379930762855400, 75.90000000000003400 ) ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 8.899999999999998600 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 37.90000000000000600 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 60.73333333333333400 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 11.39999999999999300 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 41.89999999999999100 ) ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 76.73333333333327700 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 22.73333333333333400 ) ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 16.89999999999999500 ) ) ; +#582 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 71.23333333333333400 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 5.656854249492443600, -5.656854249492441000, 6.400000000000001200 ) ) ; +#585 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 41.73333333333332700 ) ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 2.169251190438146200, 8.415390771219122700, 75.90000000000000600 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 11.06666666666666600 ) ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 40.06666666666667700 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 62.89999999999999900 ) ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 13.56666666666666800 ) ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 44.06666666666667000 ) ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 6.733333333333336100 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 24.90000000000000900 ) ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 19.06666666666667000 ) ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 73.40000000000000600 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( -1.570044867539450700, -9.083255811347546800, 6.400000000000005700 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 41.90000000000001300 ) ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 39.56666666666667700 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 13.23333333333333300 ) ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 42.23333333333334100 ) ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 65.06666666666666300 ) ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 15.73333333333333600 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 46.23333333333333400 ) ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 8.899999999999998600 ) ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 32.89999999999999900 ) ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 27.06666666666666600 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 21.23333333333333400 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306700, -2.000000000000000000, -6.000000000000000000 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 75.56666666666669100 ) ) ; +#610 = CARTESIAN_POINT ( 'NONE', ( 5.677548808404660400, -5.677548808404682600, 6.400000000000002100 ) ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 44.06666666666667000 ) ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 37.40000000000001300 ) ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 74.06666666666666300 ) ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 15.40000000000000000 ) ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 44.39999999999999900 ) ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 67.23333333333332000 ) ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 17.89999999999999900 ) ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 75.73333333333333400 ) ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 48.39999999999997000 ) ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 11.06666666666666600 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 35.06666666666666300 ) ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 29.23333333333333400 ) ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 23.40000000000000200 ) ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 77.73333333333327700 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( -5.375712440861732900, -7.677489309789523400, 6.399999999999999500 ) ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 46.23333333333334100 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 35.23333333333333400 ) ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 71.90000000000000600 ) ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 49.06666666666667000 ) ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 17.56666666666667000 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 46.56666666666667000 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 69.40000000000000600 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 20.06666666666666600 ) ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 77.89999999999999100 ) ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 50.56666666666666300 ) ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 13.23333333333333300 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 37.23333333333333400 ) ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 31.39999999999999900 ) ) ; +#640 = SURFACE_STYLE_USAGE ( .BOTH. , #2669 ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 19.90000000000000200 ) ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 79.90000000000000600 ) ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 5.689287086426494600, -5.705099266997436300, 6.399999999999999500 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 48.40000000000000600 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 33.06666666666667000 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 51.23333333333334100 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 48.73333333333330600 ) ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 71.56666666666664900 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 22.23333333333333400 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 52.73333333333332700 ) ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 15.40000000000000000 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 39.39999999999999900 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 33.56666666666666300 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 22.06666666666667400 ) ) ; +#656 = AXIS2_PLACEMENT_3D ( 'NONE', #3843, #3202, #1181 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 53.89999999999999900 ) ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 6.566666666666668200 ) ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 50.56666666666669100 ) ) ; +#660 = ORIENTED_EDGE ( 'NONE', *, *, #2092, .T. ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 30.90000000000000200 ) ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 50.89999999999999900 ) ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 73.73333333333333400 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 24.39999999999998800 ) ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 10.06666666666667200 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 54.90000000000000600 ) ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 24.06666666666665200 ) ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 17.56666666666667000 ) ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 41.56666666666667000 ) ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 35.73333333333333400 ) ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 24.23333333333333400 ) ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 56.06666666666667700 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 8.733333333333337800 ) ) ; +#674 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 52.73333333333334800 ) ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 28.73333333333333400 ) ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 53.06666666666666300 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 26.56666666666667000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 12.23333333333333400 ) ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 57.06666666666667000 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 17.06666666666667400 ) ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 19.73333333333333100 ) ) ; +#682 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 43.73333333333334100 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 37.89999999999999100 ) ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 26.39999999999999900 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 58.23333333333332700 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 10.90000000000000400 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 54.90000000000000600 ) ) ; +#688 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 26.56666666666666600 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 55.23333333333332700 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 28.73333333333333400 ) ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 14.39999999999999900 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 59.23333333333333400 ) ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 16.89999999999999900 ) ) ; +#694 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 21.89999999999999900 ) ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 45.90000000000000600 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 40.06666666666667000 ) ) ; +#697 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 28.56666666666667400 ) ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 60.39999999999999900 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 13.06666666666667200 ) ) ; +#700 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 57.06666666666664900 ) ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 24.39999999999999500 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 57.39999999999999100 ) ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 30.90000000000000200 ) ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 16.56666666666666600 ) ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 61.39999999999997000 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 24.06666666666667000 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 48.06666666666668400 ) ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 42.23333333333334100 ) ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 30.73333333333334500 ) ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 62.56666666666665600 ) ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 15.23333333333333800 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 14.23333333333333400 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 59.23333333333333400 ) ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 46.73333333333333400 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 22.23333333333333400 ) ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 59.56666666666667000 ) ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 33.06666666666667000 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 18.73333333333333400 ) ) ; +#719 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 63.56666666666666300 ) ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 26.23333333333333400 ) ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 50.23333333333333400 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 44.39999999999999900 ) ) ; +#723 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 32.89999999999999900 ) ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 64.73333333333334800 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 17.40000000000000600 ) ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 61.39999999999999100 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 48.89999999999999900 ) ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 20.06666666666666600 ) ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 69.56666666666666300 ) ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 35.23333333333333400 ) ) ; +#731 = AXIS2_PLACEMENT_3D ( 'NONE', #2208, #180, #2552 ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 20.90000000000000200 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 65.73333333333333400 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 28.39999999999999500 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 52.39999999999999900 ) ) ; +#736 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 46.56666666666667000 ) ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 35.06666666666666300 ) ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 66.90000000000000600 ) ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 19.56666666666666600 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 14.06666666666666800 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 63.56666666666669100 ) ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 51.06666666666666300 ) ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 17.89999999999999900 ) ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 67.40000000000000600 ) ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 25.56666666666667000 ) ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 37.40000000000001300 ) ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 33.39999999999999900 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 23.06666666666666600 ) ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 30.56666666666667400 ) ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 54.56666666666666300 ) ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 48.73333333333333400 ) ) ; +#752 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 37.23333333333333400 ) ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 69.06666666666667700 ) ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 21.73333333333333400 ) ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 8.233333333333334300 ) ) ; +#756 = AXIS2_PLACEMENT_3D ( 'NONE', #2528, #1169, #3516 ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 65.73333333333334800 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 53.23333333333333400 ) ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 15.73333333333333600 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 65.23333333333333400 ) ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 27.73333333333333100 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 39.56666666666667700 ) ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 33.23333333333333400 ) ) ; +#764 = ORIENTED_EDGE ( 'NONE', *, *, #1865, .F. ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 25.23333333333333400 ) ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 56.73333333333333400 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 50.89999999999999900 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 39.40000000000000600 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 71.23333333333333400 ) ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 23.90000000000001300 ) ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 62.23333333333333400 ) ) ; +#772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 67.90000000000003400 ) ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 55.39999999999997000 ) ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 13.56666666666666800 ) ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 63.06666666666666300 ) ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 29.89999999999999900 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 41.73333333333331300 ) ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 27.39999999999998400 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 58.90000000000001300 ) ) ; +#781 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 53.06666666666666300 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 41.56666666666667000 ) ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 73.40000000000000600 ) ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 26.06666666666667700 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 64.40000000000002000 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 13.90000000000000000 ) ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 57.56666666666667000 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 37.56666666666666300 ) ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 69.90000000000000600 ) ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 11.39999999999999700 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 60.90000000000000600 ) ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 32.06666666666667000 ) ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 43.89999999999999900 ) ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 71.40000000000003400 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 29.56666666666666600 ) ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 61.06666666666666300 ) ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 55.23333333333334800 ) ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 43.73333333333334100 ) ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 75.56666666666667700 ) ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 28.23333333333333800 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 66.56666666666666300 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 59.73333333333333400 ) ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 37.40000000000001300 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 5.733333333333335200 ) ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 72.06666666666669100 ) ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 9.233333333333334300 ) ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 58.73333333333332700 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 34.23333333333333400 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 46.06666666666667700 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 73.56666666666672000 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 63.23333333333334100 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 57.39999999999999900 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 45.89999999999999900 ) ) ; +#814 = ORIENTED_EDGE ( 'NONE', *, *, #1884, .F. ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 77.73333333333336300 ) ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 30.39999999999999900 ) ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 68.73333333333332000 ) ) ; +#818 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 61.89999999999999900 ) ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 7.900000000000000400 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 74.23333333333333400 ) ) ; +#821 = AXIS2_PLACEMENT_3D ( 'NONE', #510, #2872, #846 ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 56.56666666666667000 ) ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 36.39999999999999900 ) ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448896700, 8.000000000000053300, 75.73333333333337700 ) ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 65.40000000000000600 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 59.56666666666667700 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 48.06666666666666300 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 79.90000000000002000 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 32.56666666666669100 ) ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 70.89999999999999100 ) ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 64.06666666666666300 ) ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 10.06666666666666600 ) ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 76.39999999999994900 ) ) ; +#834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 54.39999999999999900 ) ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 38.56666666666665600 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( -8.276637265008078600, -0.3451757499898351300, 75.89999999999999100 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 67.56666666666666300 ) ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 61.73333333333334100 ) ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 50.23333333333333400 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 34.73333333333334100 ) ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 73.06666666666666300 ) ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 66.23333333333332000 ) ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 12.23333333333333400 ) ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 78.56666666666667700 ) ) ; +#846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 60.73333333333333400 ) ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 52.23333333333332700 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 40.73333333333334800 ) ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( -7.143239653217992000, -5.546332380903847600, 75.89999999999997700 ) ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 33.06666666666667000 ) ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 69.73333333333334800 ) ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 52.39999999999999900 ) ) ; +#854 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 36.90000000000002700 ) ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 75.23333333333332000 ) ) ; +#856 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 68.40000000000000600 ) ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 14.40000000000000200 ) ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 8.566666666666666400 ) ) ; +#859 = PLANE ( 'NONE', #431 ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 62.89999999999999900 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 5.699938409729908200, -5.761262861115602300, 6.400000000000000400 ) ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 50.06666666666666300 ) ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 42.90000000000000600 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( -2.489904946013291800, -9.006216133693369500, 75.90000000000004800 ) ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 71.90000000000000600 ) ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 31.73333333333333800 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 54.56666666666666300 ) ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 39.06666666666667000 ) ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 5.233333333333333400 ) ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #2182, .T. ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 70.56666666666666300 ) ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 16.56666666666666600 ) ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 10.73333333333333400 ) ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306700, 2.000000000000000000, -10.00000000000000000 ) ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 65.06666666666666300 ) ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( 5.699582468264702900, -5.790577140864961300, 6.400000000000334300 ) ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 47.89999999999999900 ) ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 45.06666666666667000 ) ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( 4.150371405518756200, -8.541110610220863800, 75.90000000000002000 ) ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 74.06666666666666300 ) ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 33.89999999999999900 ) ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 56.73333333333333400 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 7.399999999999995900 ) ) ; +#884 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 72.73333333333333400 ) ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 18.73333333333333800 ) ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 12.90000000000000000 ) ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 67.23333333333332000 ) ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 5.690347671727797000, -5.876566173105273600, 6.400000000000336100 ) ) ; +#889 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 45.73333333333332000 ) ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 9.039026780947963900, -2.857370094642861500, 75.89999999999997700 ) ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 76.23333333333333400 ) ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 36.06666666666666300 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 58.89999999999999100 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 9.566666666666668200 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 40.06666666666667700 ) ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 74.89999999999999100 ) ) ; +#897 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 20.90000000000000200 ) ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 15.06666666666666600 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 69.39999999999999100 ) ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 1.363797788195012300, -8.923762211491588700, 6.399999999999999500 ) ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 43.56666666666667000 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 7.533973964311219800, 5.313502034804020700, 75.90000000000002000 ) ) ; +#903 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 9.233333333333336100 ) ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 38.23333333333333400 ) ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 61.06666666666667700 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 11.73333333333333600 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 42.23333333333334100 ) ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 4.900000000000000400 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 23.06666666666667400 ) ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 17.23333333333333400 ) ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( 14.51032205009283900, -2.000000000000000000, -6.000000000000000000 ) ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 71.56666666666666300 ) ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 1.142390153921114100, -8.971777146561775500, 6.400000000002189700 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 41.39999999999999100 ) ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 1.018531120987054200, 8.415531700681485800, 75.90000000000000600 ) ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #1865, .T. ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 11.40000000000000000 ) ) ; +#918 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 40.40000000000000600 ) ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 63.23333333333334100 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 13.89999999999999900 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 44.39999999999999900 ) ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 23.90000000000000200 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 7.066666666666666400 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 25.23333333333332700 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 19.39999999999999900 ) ) ; +#926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 73.73333333333333400 ) ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( 5.673863174689448600, -5.932034393022962400, 6.400000000000122000 ) ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 42.23333333333334800 ) ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 39.23333333333332700 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 13.56666666666667000 ) ) ; +#932 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 42.56666666666667000 ) ) ; +#933 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 65.40000000000000600 ) ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 16.06666666666666300 ) ) ; +#935 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 46.56666666666667000 ) ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 23.73333333333333800 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 9.233333333333330700 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 33.23333333333333400 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 27.40000000000000600 ) ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 21.56666666666667000 ) ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306700, 2.000000000000000000, -6.000000000000000000 ) ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 75.89999999999999100 ) ) ; +#943 = CARTESIAN_POINT ( 'NONE', ( 0.6939215744168557600, -9.049704874516033100, 6.400000000002190600 ) ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 44.39999999999999900 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 37.06666666666667000 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 73.73333333333333400 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 47.23333333333333400 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 15.73333333333334300 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 44.73333333333332000 ) ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 67.56666666666666300 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 18.23333333333333400 ) ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 76.06666666666669100 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 48.73333333333330600 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 11.40000000000000000 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 35.39999999999999900 ) ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 29.56666666666666600 ) ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 23.73333333333334100 ) ) ; +#958 = AXIS2_PLACEMENT_3D ( 'NONE', #2860, #834, #3190 ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 78.06666666666667700 ) ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 46.56666666666667000 ) ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 34.89999999999999900 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 71.56666666666666300 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 49.39999999999999900 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 17.89999999999999900 ) ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 46.89999999999999900 ) ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 69.73333333333334800 ) ) ; +#967 = ORIENTED_EDGE ( 'NONE', *, *, #2266, .T. ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 20.40000000000000900 ) ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 78.23333333333333400 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 50.89999999999999900 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 13.56666666666667000 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 37.56666666666666300 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 31.73333333333333400 ) ) ; +#974 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#975 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 20.23333333333333800 ) ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #2637, .T. ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 5.614030790137404900, -6.093802848344230600, 6.400000000000120300 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 48.73333333333334100 ) ) ; +#979 = ORIENTED_EDGE ( 'NONE', *, *, #2406, .T. ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 32.73333333333333400 ) ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 51.56666666666666300 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 49.06666666666662000 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 71.90000000000000600 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 22.56666666666667000 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 8.233333333333334300 ) ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 53.06666666666666300 ) ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 15.73333333333334300 ) ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 39.73333333333334800 ) ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 33.89999999999999900 ) ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 22.39999999999999900 ) ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 54.23333333333333400 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 6.900000000000001200 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 50.90000000000002000 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 30.56666666666666600 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 51.23333333333334100 ) ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 74.06666666666666300 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 24.73333333333333100 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 10.39999999999999300 ) ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 55.23333333333332700 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 23.56666666666666600 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 17.89999999999999900 ) ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 41.89999999999999900 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 36.06666666666666300 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 24.56666666666666600 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 56.40000000000002000 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 9.066666666666670000 ) ) ; +#1007 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 53.06666666666667700 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 28.40000000000000200 ) ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 53.39999999999999900 ) ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 26.89999999999999900 ) ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 12.56666666666666600 ) ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 57.39999999999999100 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 23.40000000000000600 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 20.06666666666666300 ) ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 44.06666666666666300 ) ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 38.23333333333332700 ) ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 26.73333333333333100 ) ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 58.56666666666667000 ) ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 11.23333333333333800 ) ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 55.23333333333334100 ) ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 26.23333333333333400 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 55.56666666666667700 ) ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 29.06666666666665200 ) ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 14.73333333333332700 ) ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 59.56666666666667000 ) ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 23.23333333333333400 ) ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 22.23333333333333400 ) ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 46.23333333333333400 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 40.40000000000000600 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 28.90000000000000600 ) ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 60.73333333333333400 ) ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 13.40000000000000200 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 57.39999999999999900 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 24.06666666666665600 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 57.73333333333332000 ) ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 31.23333333333333400 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 32.89999999999999900 ) ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 16.89999999999999900 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 61.73333333333330600 ) ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 24.40000000000000200 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 48.40000000000000600 ) ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 42.56666666666667000 ) ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 31.06666666666667400 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 62.89999999999999900 ) ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 15.56666666666667000 ) ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -9.930707588193913200E-014, 75.89999999999999100 ) ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 59.56666666666667700 ) ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 47.06666666666667700 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 21.90000000000000200 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 33.39999999999999900 ) ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 19.06666666666665900 ) ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 63.89999999999999900 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 26.56666666666667000 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 50.56666666666667000 ) ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 44.73333333333334100 ) ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 33.23333333333333400 ) ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 65.06666666666666300 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 17.73333333333334100 ) ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 61.73333333333332000 ) ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 49.23333333333332700 ) ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 19.73333333333333100 ) ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 69.23333333333333400 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 35.56666666666666300 ) ) ; +#1064 = ORIENTED_EDGE ( 'NONE', *, *, #2656, .T. ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 21.23333333333333400 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 66.06666666666666300 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 28.73333333333333800 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 52.73333333333334100 ) ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 46.90000000000000600 ) ) ; +#1070 = ORIENTED_EDGE ( 'NONE', *, *, #1884, .T. ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 35.39999999999999900 ) ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 67.23333333333332000 ) ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 19.90000000000000200 ) ) ; +#1074 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #1490 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 13.73333333333332500 ) ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 63.90000000000002700 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 51.39999999999997700 ) ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 17.56666666666666600 ) ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 67.06666666666666300 ) ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 25.90000000000000200 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 37.73333333333333400 ) ) ; +#1082 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 26.73333333333333400 ) ) ; +#1083 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 23.40000000000000600 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 30.90000000000000900 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 54.89999999999999900 ) ) ; +#1086 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 49.06666666666667000 ) ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 37.56666666666666300 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 69.40000000000000600 ) ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 22.06666666666667700 ) ) ; +#1090 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 13.56666666666666800 ) ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 66.06666666666669100 ) ) ; +#1092 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 53.56666666666666300 ) ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 15.39999999999999700 ) ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 64.90000000000002000 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 28.06666666666666600 ) ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 39.89999999999999900 ) ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 26.56666666666666600 ) ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 25.56666666666666600 ) ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 57.06666666666667000 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 51.23333333333333400 ) ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 39.73333333333332700 ) ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 71.56666666666664900 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 24.23333333333334500 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 62.56666666666665600 ) ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 68.23333333333334800 ) ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 55.73333333333330600 ) ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 68.06666666666666300 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 13.23333333333333300 ) ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 62.73333333333333400 ) ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 30.23333333333333400 ) ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 42.06666666666664200 ) ) ; +#1112 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 32.73333333333333400 ) ) ; +#1113 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 69.56666666666672000 ) ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 27.73333333333331700 ) ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 59.23333333333333400 ) ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 53.40000000000000600 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 41.89999999999999100 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 73.73333333333333400 ) ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 26.40000000000000600 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 64.73333333333332000 ) ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 13.40000000000000000 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 57.89999999999999900 ) ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 37.23333333333333400 ) ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 70.23333333333334800 ) ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 11.06666666666666800 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 60.56666666666667000 ) ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 32.39999999999999900 ) ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 44.23333333333333400 ) ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 71.73333333333336300 ) ) ; +#1130 = EDGE_LOOP ( 'NONE', ( #348 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 29.89999999999999900 ) ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 61.39999999999999900 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 55.56666666666668400 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 44.06666666666667000 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 75.89999999999997700 ) ) ; +#1136 = EDGE_LOOP ( 'NONE', ( #764, #4003, #3847, #2930, #4115 ) ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 28.56666666666667000 ) ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 66.90000000000000600 ) ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 60.06666666666666300 ) ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 34.89999999999999900 ) ) ; +#1141 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 6.066666666666666400 ) ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 72.40000000000000600 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 8.900000000000002100 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 58.39999999999997700 ) ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 34.56666666666666300 ) ) ; +#1146 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 46.39999999999999900 ) ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 73.90000000000004800 ) ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 63.56666666666666300 ) ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 57.73333333333333400 ) ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 46.23333333333333400 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 78.06666666666669100 ) ) ; +#1152 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 30.73333333333332700 ) ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 69.06666666666667700 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 62.23333333333333400 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 8.233333333333334300 ) ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 74.56666666666666300 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 75.90000000000000600 ) ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 56.23333333333332700 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 36.73333333333333400 ) ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 65.73333333333333400 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 59.90000000000002000 ) ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 48.40000000000000600 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 5.066666666666667300 ) ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 32.90000000000001300 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 71.23333333333333400 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 64.39999999999997700 ) ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 10.40000000000000200 ) ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 76.73333333333327700 ) ) ; +#1169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 54.06666666666666300 ) ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 38.90000000000000600 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( -8.388900597146470500, -0.7917468024958586000, 75.90000000000003400 ) ) ; +#1173 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 67.90000000000000600 ) ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 62.06666666666668400 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 50.56666666666667000 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 35.06666666666667700 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 73.39999999999999100 ) ) ; +#1178 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 66.56666666666666300 ) ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 12.56666666666666800 ) ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 78.89999999999999100 ) ) ; +#1181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 61.06666666666665600 ) ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 5.559116980855411500, -6.195853673195469600, 6.399999999999999500 ) ) ; +#1184 = AXIS2_PLACEMENT_3D ( 'NONE', #3648, #3981, #1310 ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 51.89999999999999900 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 41.06666666666667000 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( -6.742225489603442600, -6.098843949730864200, 75.90000000000004800 ) ) ; +#1188 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .F. ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 70.06666666666669100 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 52.73333333333334100 ) ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 37.23333333333336300 ) ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 75.56666666666667700 ) ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 68.73333333333333400 ) ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 14.73333333333333400 ) ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 8.899999999999998600 ) ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 63.23333333333333400 ) ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 5.378898271827363700, -6.490180763140354100, 6.400000000000001200 ) ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 49.73333333333333400 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 43.23333333333333400 ) ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( -1.615173330995703300, -9.241877467968690100, 75.90000000000002000 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 72.23333333333332000 ) ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 32.06666666666667000 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 54.90000000000000600 ) ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 39.40000000000002000 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 5.566666666666667300 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 70.90000000000000600 ) ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 16.90000000000000200 ) ) ; +#1208 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 11.06666666666666600 ) ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 65.40000000000000600 ) ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( -2.912953353568990900, -8.814199146596186200, 6.400000000000001200 ) ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 47.56666666666667000 ) ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 45.39999999999999900 ) ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( 5.330992538070892000, -7.870960669297239100, 75.89999999999997700 ) ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 74.39999999999999100 ) ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 34.23333333333333400 ) ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 57.06666666666667000 ) ) ; +#1217 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 7.733333333333329000 ) ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 73.06666666666666300 ) ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 19.06666666666666600 ) ) ; +#1220 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 13.23333333333333300 ) ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 67.56666666666666300 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 5.235403609722420800, -6.671610544647102800, 6.400000000000005700 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 45.39999999999998400 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( 9.334327467236040100, -1.521619121058149800, 75.89999999999996300 ) ) ; +#1225 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 76.56666666666664900 ) ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 36.39999999999999900 ) ) ; +#1227 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 59.23333333333333400 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 9.900000000000000400 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 40.40000000000000600 ) ) ; +#1230 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 75.23333333333333400 ) ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 21.23333333333333400 ) ) ; +#1232 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 15.40000000000000000 ) ) ; +#1233 = EDGE_LOOP ( 'NONE', ( #2465, #183 ) ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 69.73333333333329200 ) ) ; +#1235 = CARTESIAN_POINT ( 'NONE', ( -3.346265111719239000, -8.678993479200753900, 6.400000000000000400 ) ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 43.23333333333333400 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 6.927093510551451900, 5.994740785046381000, 75.90000000000006300 ) ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 9.566666666666668200 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 38.56666666666666300 ) ) ; +#1240 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 61.39999999999999900 ) ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 12.06666666666665900 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 42.56666666666667000 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 5.233333333333333400 ) ) ; +#1244 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 23.40000000000000200 ) ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 17.56666666666667000 ) ) ; +#1246 = PLANE ( 'NONE', #53 ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 71.90000000000000600 ) ) ; +#1248 = CARTESIAN_POINT ( 'NONE', ( -4.185894291939331600, -8.345382996938182500, 6.399999999999999500 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 41.06666666666667700 ) ) ; +#1250 = CARTESIAN_POINT ( 'NONE', ( 0.4532832197298188900, 8.308578656517228800, 75.90000000000002000 ) ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 11.73333333333333400 ) ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 40.73333333333334100 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 63.56666666666666300 ) ) ; +#1254 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 14.23333333333333400 ) ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 44.73333333333332000 ) ) ; +#1256 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 23.06666666666666600 ) ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 7.400000000000002100 ) ) ; +#1258 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 31.39999999999999900 ) ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 25.56666666666667000 ) ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 19.73333333333333100 ) ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 5.656854249492443600, -5.656854249492441000, 6.400000000000001200 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 74.06666666666669100 ) ) ; +#1263 = AXIS2_PLACEMENT_3D ( 'NONE', #4281, #926, #3277 ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -2.018950253369120600, -9.017659276904806700, 6.400000000000001200 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 42.56666666666668400 ) ) ; +#1266 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 38.90000000000000600 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 75.56666666666669100 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 13.90000000000000000 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 42.89999999999999100 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 65.73333333333333400 ) ) ; +#1271 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 16.40000000000000200 ) ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 46.89999999999999900 ) ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 9.566666666666668200 ) ) ; +#1274 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 33.56666666666666300 ) ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 27.73333333333333100 ) ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 21.90000000000000200 ) ) ; +#1277 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 76.23333333333333400 ) ) ; +#1278 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 44.73333333333333400 ) ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 36.73333333333333400 ) ) ; +#1280 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 73.40000000000000600 ) ) ; +#1281 = ORIENTED_EDGE ( 'NONE', *, *, #2656, .F. ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 47.56666666666666300 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 16.06666666666667000 ) ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 45.06666666666664200 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 67.90000000000000600 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 18.56666666666666600 ) ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 76.39999999999999100 ) ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 49.06666666666662000 ) ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 11.73333333333333400 ) ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 35.73333333333333400 ) ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 29.89999999999999900 ) ) ; +#1292 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1293 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 78.39999999999999100 ) ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 4.927496127852887900, -7.013134871707422700, 6.400000000000003000 ) ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 46.90000000000002000 ) ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 34.56666666666666300 ) ) ; +#1297 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #1490 ), #1525 ) ; +#1298 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 49.73333333333333400 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 18.23333333333333100 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 47.23333333333333400 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 70.06666666666669100 ) ) ; +#1302 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 20.73333333333332400 ) ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 78.56666666666667700 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 51.23333333333334100 ) ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 13.90000000000000000 ) ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 37.89999999999999100 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 32.06666666666667000 ) ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 20.56666666666667000 ) ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 52.39999999999999900 ) ) ; +#1310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( -5.931967682470378200, -7.281791628515121900, 6.400000000000011000 ) ) ; +#1312 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 49.06666666666667000 ) ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 32.39999999999999900 ) ) ; +#1314 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 51.90000000000002000 ) ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 49.39999999999999900 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 72.23333333333332000 ) ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 22.89999999999999900 ) ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 8.566666666666666400 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 53.39999999999999900 ) ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 16.06666666666667000 ) ) ; +#1321 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 40.06666666666667000 ) ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 34.23333333333332700 ) ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 22.73333333333333400 ) ) ; +#1324 = AXIS2_PLACEMENT_3D ( 'NONE', #3504, #1494, #3831 ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 54.56666666666666300 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 7.233333333333334300 ) ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 51.23333333333336300 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 30.23333333333333400 ) ) ; +#1329 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 51.56666666666666300 ) ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 74.40000000000003400 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 25.06666666666667400 ) ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 10.73333333333333400 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 55.56666666666667700 ) ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 22.89999999999999900 ) ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 18.23333333333333100 ) ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 42.23333333333334100 ) ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 36.39999999999999900 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 24.89999999999999900 ) ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 56.73333333333333400 ) ) ; +#1340 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 9.400000000000005700 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 53.40000000000002700 ) ) ; +#1342 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .T. ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 28.06666666666666600 ) ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 53.73333333333334100 ) ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 27.23333333333333400 ) ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 12.90000000000000200 ) ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 57.73333333333332000 ) ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 22.73333333333332000 ) ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 20.40000000000000200 ) ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 44.39999999999999900 ) ) ; +#1351 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 38.56666666666665600 ) ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 27.06666666666666600 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 58.89999999999999100 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 11.56666666666666800 ) ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 55.56666666666668400 ) ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 25.89999999999999900 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 55.90000000000000600 ) ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 29.39999999999998400 ) ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 15.06666666666667000 ) ) ; +#1360 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 59.89999999999999100 ) ) ; +#1361 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 22.56666666666666600 ) ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 22.56666666666667000 ) ) ; +#1363 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 46.56666666666667000 ) ) ; +#1364 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 40.73333333333334800 ) ) ; +#1365 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 29.23333333333333400 ) ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 61.06666666666667700 ) ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 13.73333333333333600 ) ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 57.73333333333332700 ) ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 23.73333333333333100 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 58.06666666666663400 ) ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 31.56666666666666600 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 32.56666666666667000 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 17.23333333333333400 ) ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 62.06666666666662700 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 24.73333333333333400 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 48.73333333333333400 ) ) ; +#1377 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 42.90000000000000600 ) ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 31.39999999999999900 ) ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 63.23333333333334100 ) ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 15.90000000000000700 ) ) ; +#1381 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 13.23333333333333300 ) ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 59.90000000000001300 ) ) ; +#1383 = ORIENTED_EDGE ( 'NONE', *, *, #2349, .F. ) ; +#1384 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 47.39999999999999900 ) ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 21.56666666666666300 ) ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 71.06666666666663400 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 33.73333333333332700 ) ) ; +#1388 = VERTEX_POINT ( 'NONE', #2609 ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 19.39999999999998100 ) ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 64.23333333333333400 ) ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 26.90000000000000900 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 50.89999999999999900 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 45.06666666666667000 ) ) ; +#1394 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 33.56666666666666300 ) ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 65.40000000000000600 ) ) ; +#1396 = VERTEX_POINT ( 'NONE', #1878 ) ; +#1397 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 18.06666666666667700 ) ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 13.06666666666665900 ) ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 62.06666666666666300 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 49.56666666666667000 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 19.39999999999999900 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 68.90000000000000600 ) ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 24.06666666666667000 ) ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 35.89999999999999900 ) ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 21.56666666666666300 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 66.40000000000000600 ) ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 29.06666666666667400 ) ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 53.06666666666666300 ) ) ; +#1409 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 47.23333333333333400 ) ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 35.73333333333333400 ) ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 67.56666666666666300 ) ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 20.23333333333333100 ) ) ; +#1413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 64.23333333333334800 ) ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 51.73333333333329200 ) ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 17.23333333333333400 ) ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 66.73333333333333400 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 26.23333333333333400 ) ) ; +#1419 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 38.06666666666665600 ) ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 32.39999999999999900 ) ) ; +#1421 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 23.73333333333333800 ) ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 55.23333333333334800 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 49.39999999999999900 ) ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 37.89999999999999100 ) ) ; +#1425 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 69.73333333333334800 ) ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 22.39999999999999900 ) ) ; +#1427 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 12.90000000000000200 ) ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 66.40000000000004800 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 53.89999999999999900 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 15.06666666666667000 ) ) ; +#1431 = AXIS2_PLACEMENT_3D ( 'NONE', #3112, #1741, #3395 ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 64.56666666666666300 ) ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 28.39999999999999500 ) ) ; +#1434 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 40.23333333333333400 ) ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 32.23333333333333400 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 25.89999999999999900 ) ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 57.39999999999999900 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 51.56666666666666300 ) ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 40.06666666666667000 ) ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 71.90000000000000600 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 24.56666666666667700 ) ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 62.89999999999999900 ) ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 12.73333333333333400 ) ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 68.56666666666669100 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 56.06666666666666300 ) ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 68.40000000000000600 ) ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 12.90000000000000200 ) ) ; +#1448 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 62.39999999999999900 ) ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 30.56666666666666600 ) ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 42.39999999999999900 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 32.06666666666667000 ) ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 69.90000000000006300 ) ) ; +#1453 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 28.06666666666666600 ) ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 59.56666666666667700 ) ) ; +#1455 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 53.73333333333332000 ) ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 42.23333333333334100 ) ) ; +#1457 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 74.06666666666666300 ) ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 26.73333333333334100 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 65.06666666666666300 ) ) ; +#1460 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 12.56666666666666600 ) ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 58.23333333333334100 ) ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 70.56666666666666300 ) ) ; +#1463 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 10.73333333333333400 ) ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( 4.761508210357077600, -7.173214041467961300, 6.400000000000003900 ) ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 60.23333333333333400 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 32.73333333333333400 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 44.56666666666666300 ) ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 72.06666666666669100 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 30.23333333333333400 ) ) ; +#1470 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 61.73333333333334100 ) ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 55.90000000000001300 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 44.39999999999999900 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 76.23333333333333400 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 28.90000000000000600 ) ) ; +#1475 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 67.23333333333332000 ) ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 60.40000000000001300 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 37.06666666666667700 ) ) ; +#1478 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 6.400000000000002100 ) ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 72.73333333333333400 ) ) ; +#1480 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 8.566666666666666400 ) ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 58.06666666666665600 ) ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 34.89999999999999900 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 74.23333333333339100 ) ) ; +#1484 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 63.90000000000002000 ) ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 58.06666666666668400 ) ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 46.56666666666667000 ) ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 78.40000000000000600 ) ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 31.06666666666666600 ) ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 69.40000000000000600 ) ) ; +#1490 = STYLED_ITEM ( 'NONE', ( #3990 ), #4208 ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 62.56666666666666300 ) ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 8.566666666666666400 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 74.90000000000000600 ) ) ; +#1494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1495 = AXIS2_PLACEMENT_3D ( 'NONE', #1775, #1413, #772 ) ; +#1496 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 55.90000000000000600 ) ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 37.06666666666666300 ) ) ; +#1498 = EDGE_LOOP ( 'NONE', ( #2924, #4051, #2149, #3340, #3033 ) ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 66.06666666666666300 ) ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 60.23333333333334100 ) ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 48.73333333333333400 ) ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 5.400000000000000400 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 33.23333333333334100 ) ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 71.56666666666664900 ) ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 64.73333333333332000 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 10.73333333333333400 ) ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 77.06666666666662000 ) ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 4.416153572332974300, -7.471368182086984600, 6.400000000000005700 ) ) ; +#1509 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 53.73333333333332700 ) ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 39.23333333333334100 ) ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( -8.440078980339917400, -1.476460870212694200, 75.89999999999994900 ) ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 68.23333333333334800 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 50.89999999999999900 ) ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 35.40000000000001300 ) ) ; +#1515 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 73.73333333333333400 ) ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 66.90000000000000600 ) ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 12.90000000000000000 ) ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 79.23333333333333400 ) ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 61.39999999999997000 ) ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 4.235914728262741000, -7.610056274004389100, 6.399999999999999500 ) ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 51.56666666666666300 ) ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 41.40000000000000600 ) ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( -5.989689362991245300, -6.944643792568016700, 75.90000000000004800 ) ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 70.40000000000000600 ) ) ; +#1525 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2800 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #4311, #2312, #282 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1526 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 53.06666666666666300 ) ) ; +#1527 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 37.56666666666669100 ) ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 75.89999999999997700 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 69.06666666666667700 ) ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 15.06666666666666300 ) ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 9.233333333333336100 ) ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 63.56666666666666300 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 3.862952907926528600, -7.870280179875701200, 6.399999999999996800 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 49.39999999999999900 ) ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 43.56666666666667000 ) ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( -0.2671399803987738500, -9.415438707177191400, 75.89999999999989200 ) ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 72.56666666666666300 ) ) ; +#1539 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 32.39999999999999900 ) ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 55.23333333333332700 ) ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 39.73333333333335600 ) ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 5.900000000000000400 ) ) ; +#1543 = EDGE_LOOP ( 'NONE', ( #1070, #1188, #1281, #1383 ) ) ; +#1544 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 71.23333333333333400 ) ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 17.23333333333333400 ) ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 11.40000000000000000 ) ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 65.73333333333333400 ) ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( -6.788338947310115200, -6.544919228013970500, 6.400000000000070500 ) ) ; +#1549 = EDGE_LOOP ( 'NONE', ( #3689 ) ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 47.23333333333333400 ) ) ; +#1551 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 45.73333333333333400 ) ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 6.408363630558948600, -7.027610147555537700, 75.89999999999996300 ) ) ; +#1553 = EDGE_LOOP ( 'NONE', ( #3503, #2679, #2776 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 74.73333333333333400 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 34.56666666666666300 ) ) ; +#1556 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 57.39999999999998400 ) ) ; +#1557 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 8.066666666666666400 ) ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 73.39999999999999100 ) ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 19.39999999999999900 ) ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 13.56666666666667000 ) ) ; +#1561 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 67.90000000000000600 ) ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( -5.181894811452751000, -7.801163315287919200, 6.400000000000003900 ) ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 45.06666666666665600 ) ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 9.417708579255096500, -0.3954498624192228100, 75.90000000000002000 ) ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 76.89999999999999100 ) ) ; +#1567 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 36.73333333333333400 ) ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 59.56666666666667700 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 10.23333333333333400 ) ) ; +#1570 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 40.73333333333334100 ) ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 75.56666666666669100 ) ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 21.56666666666667400 ) ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 15.73333333333334300 ) ) ; +#1574 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 70.06666666666660600 ) ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( -7.685362628865875400, -5.513008372637696800, 6.400000000000017200 ) ) ; +#1577 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 42.89999999999999100 ) ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 6.431657887058933400, 6.465301575795918700, 75.90000000000003400 ) ) ; +#1579 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 9.900000000000000400 ) ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 38.90000000000000600 ) ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 61.73333333333334100 ) ) ; +#1582 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 12.40000000000000400 ) ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 42.89999999999999100 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 5.566666666666667300 ) ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 23.73333333333334100 ) ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 17.89999999999999900 ) ) ; +#1587 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 72.23333333333333400 ) ) ; +#1589 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 40.73333333333332700 ) ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 0.1851732875246577800, 8.204730025537218200, 75.90000000000002000 ) ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 12.06666666666666800 ) ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 41.06666666666667000 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 63.90000000000002000 ) ) ; +#1594 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 14.56666666666666800 ) ) ; +#1595 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 45.06666666666664200 ) ) ; +#1596 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 22.39999999999998800 ) ) ; +#1597 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 7.733333333333334300 ) ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 31.73333333333333400 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 25.90000000000000200 ) ) ; +#1600 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 20.06666666666666300 ) ) ; +#1601 = ORIENTED_EDGE ( 'NONE', *, *, #2573, .T. ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 74.40000000000003400 ) ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( -5.750440827015610900, -7.417948644491086300, 6.399999999999999500 ) ) ; +#1604 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 42.90000000000001300 ) ) ; +#1605 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 38.56666666666666300 ) ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 75.23333333333333400 ) ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 14.23333333333333400 ) ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 43.23333333333333400 ) ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 66.06666666666666300 ) ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 16.73333333333333800 ) ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 47.23333333333333400 ) ) ; +#1612 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 9.900000000000000400 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 33.89999999999999900 ) ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 28.06666666666666600 ) ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 22.23333333333333400 ) ) ; +#1616 = FILL_AREA_STYLE ('',( #2966 ) ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 76.56666666666667700 ) ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( -6.459430102429043300, -6.854591463426378300, 6.400000000000008300 ) ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 45.06666666666666300 ) ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 36.39999999999999900 ) ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 73.06666666666666300 ) ) ; +#1622 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 47.89999999999999900 ) ) ; +#1623 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 16.39999999999999500 ) ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 45.39999999999995600 ) ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 68.23333333333334800 ) ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 18.89999999999999900 ) ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 76.73333333333333400 ) ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 49.39999999999999900 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 12.06666666666666800 ) ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 36.06666666666666300 ) ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 30.23333333333333400 ) ) ; +#1632 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1633 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 18.73333333333333800 ) ) ; +#1634 = AXIS2_PLACEMENT_3D ( 'NONE', #2621, #307, #285 ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 78.73333333333333400 ) ) ; +#1636 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #3763 ) ; +#1637 = CARTESIAN_POINT ( 'NONE', ( -4.592318519870951300, -8.146760967675048100, 6.400000000000003900 ) ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 47.23333333333335600 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 34.23333333333333400 ) ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 50.06666666666667000 ) ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 18.56666666666667000 ) ) ; +#1642 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 47.56666666666667000 ) ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 70.40000000000000600 ) ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 21.06666666666665200 ) ) ; +#1645 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 78.90000000000002000 ) ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 51.56666666666666300 ) ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 14.23333333333333400 ) ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 38.23333333333332700 ) ) ; +#1649 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 32.39999999999999900 ) ) ; +#1650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 20.90000000000000200 ) ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 52.73333333333334100 ) ) ; +#1653 = CARTESIAN_POINT ( 'NONE', ( -7.400507596042335700, -5.875629732916315200, 6.400000000000070500 ) ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 49.40000000000000600 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 32.06666666666667000 ) ) ; +#1656 = AXIS2_PLACEMENT_3D ( 'NONE', #3097, #3068, #3144 ) ; +#1657 = EDGE_LOOP ( 'NONE', ( #555 ) ) ; +#1658 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 52.23333333333332700 ) ) ; +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .F. ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 49.73333333333334800 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 72.56666666666666300 ) ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 23.23333333333333400 ) ) ; +#1663 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 8.900000000000002100 ) ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 53.73333333333334100 ) ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 22.23333333333333400 ) ) ; +#1666 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 16.40000000000000200 ) ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 40.40000000000000600 ) ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 34.56666666666666300 ) ) ; +#1669 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 23.06666666666666600 ) ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 54.90000000000000600 ) ) ; +#1671 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 7.566666666666669100 ) ) ; +#1672 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 51.56666666666668400 ) ) ; +#1673 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 29.89999999999999900 ) ) ; +#1674 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 51.89999999999999900 ) ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 74.73333333333333400 ) ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 25.40000000000000200 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 11.06666666666666800 ) ) ; +#1678 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 55.90000000000000600 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 16.56666666666666600 ) ) ; +#1680 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 18.56666666666666300 ) ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 42.56666666666667000 ) ) ; +#1682 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 36.73333333333333400 ) ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 25.23333333333332700 ) ) ; +#1684 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 57.06666666666667000 ) ) ; +#1685 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 9.733333333333334300 ) ) ; +#1686 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 53.73333333333334800 ) ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 27.73333333333332400 ) ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 54.06666666666667700 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 27.56666666666666600 ) ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 13.23333333333333300 ) ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 58.06666666666663400 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 16.39999999999999900 ) ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 20.73333333333333800 ) ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 44.73333333333334100 ) ) ; +#1695 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 38.89999999999999100 ) ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 27.40000000000000600 ) ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 59.23333333333333400 ) ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 11.90000000000000600 ) ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 55.90000000000000600 ) ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 25.56666666666666600 ) ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 56.23333333333332700 ) ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 29.73333333333333400 ) ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 15.39999999999999300 ) ) ; +#1704 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 60.23333333333333400 ) ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 22.06666666666667000 ) ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 22.89999999999999900 ) ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 46.90000000000000600 ) ) ; +#1708 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 41.06666666666667000 ) ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 29.56666666666666600 ) ) ; +#1710 = EDGE_LOOP ( 'NONE', ( #4180 ) ) ; +#1711 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 61.39999999999999900 ) ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 14.06666666666667200 ) ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 58.06666666666666300 ) ) ; +#1714 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 23.40000000000000600 ) ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 58.39999999999996300 ) ) ; +#1716 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 31.89999999999999900 ) ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 31.89999999999999900 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 17.56666666666666600 ) ) ; +#1719 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 62.39999999999995600 ) ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 25.06666666666667000 ) ) ; +#1721 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 49.06666666666667000 ) ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 43.23333333333333400 ) ) ; +#1723 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 31.73333333333333400 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 63.56666666666666300 ) ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 16.23333333333333800 ) ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 12.40000000000000400 ) ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 60.23333333333334800 ) ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 47.73333333333333400 ) ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 21.23333333333333400 ) ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 38.06666666666665600 ) ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 70.73333333333330600 ) ) ; +#1732 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 34.06666666666668400 ) ) ; +#1733 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 19.73333333333333800 ) ) ; +#1734 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 64.56666666666666300 ) ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 27.23333333333333400 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 51.23333333333333400 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 45.39999999999999900 ) ) ; +#1738 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 33.89999999999999900 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 65.73333333333333400 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 18.40000000000000200 ) ) ; +#1741 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1742 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 62.39999999999999900 ) ) ; +#1743 = VERTEX_POINT ( 'NONE', #624 ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 49.89999999999999900 ) ) ; +#1745 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 19.06666666666666300 ) ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 68.56666666666666300 ) ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 24.40000000000000200 ) ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 36.23333333333333400 ) ) ; +#1749 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 26.06666666666665200 ) ) ; +#1750 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 21.90000000000000200 ) ) ; +#1751 = SURFACE_STYLE_FILL_AREA ( #1616 ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 66.73333333333336300 ) ) ; +#1753 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 29.40000000000000200 ) ) ; +#1754 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 53.40000000000000600 ) ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 47.56666666666666300 ) ) ; +#1756 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 36.06666666666666300 ) ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 67.90000000000000600 ) ) ; +#1758 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 20.56666666666667400 ) ) ; +#1759 = COLOUR_RGB ( '',0.7529411764705882200, 1.000000000000000000, 0.7529411764705882200 ) ; +#1760 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2665 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1292, #3630, #1632 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1761 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 8.066666666666668200 ) ) ; +#1762 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 64.56666666666669100 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 52.06666666666662700 ) ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 16.89999999999999900 ) ) ; +#1765 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 66.40000000000000600 ) ) ; +#1766 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 26.56666666666666600 ) ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 38.39999999999996300 ) ) ; +#1768 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 31.73333333333333800 ) ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 24.06666666666665200 ) ) ; +#1770 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 55.56666666666668400 ) ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 49.73333333333332700 ) ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 38.23333333333332700 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 70.06666666666669100 ) ) ; +#1774 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 22.73333333333333400 ) ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 66.73333333333334800 ) ) ; +#1777 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 54.23333333333333400 ) ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 14.73333333333333100 ) ) ; +#1779 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 64.23333333333333400 ) ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 28.73333333333333800 ) ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 40.56666666666667000 ) ) ; +#1782 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 31.56666666666666600 ) ) ; +#1783 = EDGE_CURVE ( 'NONE', #1969, #2927, #3869, .T. ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 26.23333333333333400 ) ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 57.73333333333333400 ) ) ; +#1786 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 51.90000000000002000 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 40.40000000000000600 ) ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 72.23333333333332000 ) ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 24.90000000000001300 ) ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 63.23333333333334100 ) ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 12.23333333333333400 ) ) ; +#1792 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 68.90000000000006300 ) ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 56.40000000000001300 ) ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 36.90000000000000600 ) ) ; +#1795 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 68.73333333333333400 ) ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 12.56666666666666600 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 62.06666666666664200 ) ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 30.90000000000000900 ) ) ; +#1799 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 42.73333333333332700 ) ) ; +#1800 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 31.39999999999999500 ) ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 70.23333333333339100 ) ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 28.40000000000000200 ) ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 59.90000000000002000 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 54.06666666666669100 ) ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 42.56666666666667000 ) ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 74.40000000000003400 ) ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 27.06666666666667400 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 65.40000000000000600 ) ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 58.56666666666667000 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 70.90000000000000600 ) ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 10.40000000000000000 ) ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 59.89999999999999100 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 33.06666666666667000 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 44.90000000000001300 ) ) ; +#1815 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 72.40000000000003400 ) ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 30.56666666666666600 ) ) ; +#1817 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 62.06666666666668400 ) ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 56.23333333333335600 ) ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 44.73333333333334100 ) ) ; +#1820 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 76.56666666666664900 ) ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 29.23333333333333800 ) ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 67.56666666666666300 ) ) ; +#1823 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 60.73333333333333400 ) ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 36.73333333333333400 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 6.733333333333336100 ) ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 73.06666666666666300 ) ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 8.233333333333334300 ) ) ; +#1828 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 57.73333333333332000 ) ) ; +#1829 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 35.23333333333332700 ) ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 74.56666666666672000 ) ) ; +#1831 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 64.23333333333332000 ) ) ; +#1832 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 58.40000000000000600 ) ) ; +#1833 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 46.90000000000000600 ) ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 78.73333333333333400 ) ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 31.39999999999999900 ) ) ; +#1836 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 69.73333333333334800 ) ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 62.89999999999999900 ) ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 8.899999999999998600 ) ) ; +#1839 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 75.23333333333333400 ) ) ; +#1840 = PRODUCT ( 'Trellais_Rear_Adjust', 'Trellais_Rear_Adjust', '', ( #3978 ) ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 55.56666666666667700 ) ) ; +#1842 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 37.40000000000002000 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 66.40000000000000600 ) ) ; +#1844 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 60.56666666666666300 ) ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 49.06666666666667000 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 33.56666666666668400 ) ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 71.90000000000000600 ) ) ; +#1848 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 65.06666666666666300 ) ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 11.06666666666666600 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 77.39999999999993500 ) ) ; +#1851 = ADVANCED_FACE ( 'NONE', ( #82, #288 ), #571, .F. ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 53.39999999999999900 ) ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 39.56666666666666300 ) ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( -8.405201815056123800, -2.160849814456647300, 75.90000000000000600 ) ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 68.56666666666664900 ) ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 51.23333333333334100 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 35.73333333333334800 ) ) ; +#1858 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 74.06666666666666300 ) ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 67.23333333333332000 ) ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 13.23333333333333300 ) ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 79.56666666666667700 ) ) ; +#1862 = PLANE ( 'NONE', #532 ) ; +#1863 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 61.73333333333330600 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( -8.705972877799803600, -3.752133570593775100, 6.400000000000006600 ) ) ; +#1865 = EDGE_CURVE ( 'NONE', #1969, #1396, #229, .T. ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 51.23333333333334100 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 41.73333333333334800 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( -5.293843357031366100, -7.537900185577898400, 75.90000000000000600 ) ) ; +#1869 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 70.73333333333333400 ) ) ; +#1870 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 53.40000000000000600 ) ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 37.90000000000004100 ) ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 76.23333333333333400 ) ) ; +#1873 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 69.39999999999999100 ) ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 15.40000000000000000 ) ) ; +#1875 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 9.566666666666668200 ) ) ; +#1876 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 63.89999999999999900 ) ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 49.06666666666664200 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 43.89999999999999100 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 1.099913811710167700, -9.385086027501330400, 75.90000000000000600 ) ) ; +#1882 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 72.89999999999997700 ) ) ; +#1883 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 32.73333333333333400 ) ) ; +#1884 = EDGE_CURVE ( 'NONE', #3081, #1388, #287, .T. ) ; +#1885 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 55.56666666666668400 ) ) ; +#1886 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 40.06666666666669100 ) ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 6.233333333333333400 ) ) ; +#1888 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 71.56666666666666300 ) ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 17.56666666666667000 ) ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 11.73333333333333400 ) ) ; +#1891 = ADVANCED_FACE ( 'NONE', ( #133, #292 ), #4331, .T. ) ; +#1892 = EDGE_CURVE ( 'NONE', #3081, #1388, #4335, .T. ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 66.06666666666666300 ) ) ; +#1894 = CARTESIAN_POINT ( 'NONE', ( -8.191456983842446200, -4.758682014052107300, 6.400000000000015500 ) ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 46.89999999999999900 ) ) ; +#1896 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 46.06666666666667700 ) ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( 7.341481215810544500, -6.044972608068935200, 75.90000000000000600 ) ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 75.06666666666666300 ) ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 34.89999999999999900 ) ) ; +#1900 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 57.73333333333333400 ) ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 8.400000000000003900 ) ) ; +#1902 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 73.73333333333333400 ) ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 19.73333333333333100 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 13.90000000000000000 ) ) ; +#1905 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 68.23333333333332000 ) ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( -8.414746604325031900, -4.365483671369994500, 6.400000000000007500 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 44.73333333333332000 ) ) ; +#1909 = CARTESIAN_POINT ( 'NONE', ( 9.405873240693145100, 0.2859414359121726900, 75.90000000000000600 ) ) ; +#1910 = ADVANCED_FACE ( 'NONE', ( #2018 ), #3734, .F. ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 8.066666666666668200 ) ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 37.06666666666667700 ) ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 59.90000000000001300 ) ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 10.56666666666666600 ) ) ; +#1915 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 41.06666666666667000 ) ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 75.89999999999999100 ) ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 21.89999999999999900 ) ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 16.06666666666667000 ) ) ; +#1919 = VERTEX_POINT ( 'NONE', #1046 ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 70.39999999999992000 ) ) ; +#1922 = CARTESIAN_POINT ( 'NONE', ( -8.795711522485387200, -3.543730038301577500, 6.400000000000003000 ) ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 42.56666666666667000 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( 5.540005626405632100, 7.158575610106686900, 75.89999999999997700 ) ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 10.23333333333333400 ) ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 39.23333333333332700 ) ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 62.06666666666666300 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 12.73333333333333400 ) ) ; +#1929 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 43.23333333333333400 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 5.900000000000002100 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 24.06666666666667000 ) ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 18.23333333333333100 ) ) ; +#1933 = ADVANCED_FACE ( 'NONE', ( #4366, #4328 ), #4271, .T. ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 72.56666666666666300 ) ) ; +#1935 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 41.06666666666667000 ) ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 40.40000000000000600 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 0.06600304805964417300, 8.124210173314660100, 75.90000000000080100 ) ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 12.40000000000000200 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 41.39999999999997700 ) ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 64.23333333333333400 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 14.90000000000000000 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 45.39999999999995600 ) ) ; +#1943 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 21.90000000000000200 ) ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 8.066666666666666400 ) ) ; +#1945 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 32.06666666666667000 ) ) ; +#1946 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 26.23333333333333400 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 20.40000000000000200 ) ) ; +#1948 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1949 = EDGE_CURVE ( 'NONE', #2927, #501, #3425, .T. ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 74.73333333333333400 ) ) ; +#1951 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 43.23333333333334800 ) ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 38.23333333333333400 ) ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 74.90000000000000600 ) ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 14.56666666666667200 ) ) ; +#1955 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 43.56666666666667000 ) ) ; +#1956 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 66.40000000000000600 ) ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 17.06666666666667400 ) ) ; +#1958 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 47.56666666666667000 ) ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 10.23333333333333400 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 34.23333333333332700 ) ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 28.39999999999999500 ) ) ; +#1962 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 22.56666666666666600 ) ) ; +#1963 = SURFACE_STYLE_USAGE ( .BOTH. , #3949 ) ; +#1964 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 76.89999999999999100 ) ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 45.39999999999999900 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 36.06666666666666300 ) ) ; +#1967 = EDGE_CURVE ( 'NONE', #1919, #501, #3114, .T. ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 72.73333333333333400 ) ) ; +#1969 = VERTEX_POINT ( 'NONE', #3834 ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 48.23333333333334100 ) ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 16.73333333333333800 ) ) ; +#1972 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 45.73333333333330600 ) ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 68.56666666666664900 ) ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 19.23333333333333400 ) ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 77.06666666666667700 ) ) ; +#1976 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 49.73333333333334800 ) ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 12.40000000000000200 ) ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 36.39999999999999900 ) ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 30.56666666666667400 ) ) ; +#1980 = EDGE_LOOP ( 'NONE', ( #3850 ) ) ; +#1981 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #2328 ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 19.06666666666667000 ) ) ; +#1983 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 79.06666666666664900 ) ) ; +#1984 = CARTESIAN_POINT ( 'NONE', ( -8.960221072663292900, -3.118857454646295000, 6.400000000000003900 ) ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 47.56666666666669100 ) ) ; +#1986 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 33.89999999999999900 ) ) ; +#1987 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 50.40000000000002000 ) ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 47.89999999999999900 ) ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 70.73333333333333400 ) ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 21.40000000000000200 ) ) ; +#1991 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 79.23333333333333400 ) ) ; +#1992 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 51.89999999999999900 ) ) ; +#1993 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 14.56666666666667200 ) ) ; +#1994 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 38.56666666666665600 ) ) ; +#1995 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 32.73333333333333400 ) ) ; +#1996 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 21.23333333333333400 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 53.06666666666666300 ) ) ; +#1999 = CARTESIAN_POINT ( 'NONE', ( 6.401593239925929000, -4.912115259058833900, 6.484777698343417100 ) ) ; +#2000 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 49.73333333333333400 ) ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 31.73333333333333400 ) ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 50.06666666666666300 ) ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 72.90000000000000600 ) ) ; +#2004 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 23.56666666666666600 ) ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 9.233333333333334300 ) ) ; +#2006 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 54.06666666666667700 ) ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 16.06666666666666300 ) ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 16.73333333333333800 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 40.73333333333334800 ) ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 34.89999999999999900 ) ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 23.40000000000000200 ) ) ; +#2012 = EDGE_CURVE ( 'NONE', #1919, #1396, #2978, .T. ) ; +#2013 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 55.23333333333332700 ) ) ; +#2014 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 7.900000000000003900 ) ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 51.90000000000002000 ) ) ; +#2016 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 29.56666666666666600 ) ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 37.90000000000000600 ) ) ; +#2018 = FACE_OUTER_BOUND ( 'NONE', #1136, .T. ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 52.23333333333332700 ) ) ; +#2020 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 75.06666666666666300 ) ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 25.73333333333332000 ) ) ; +#2022 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 11.39999999999999300 ) ) ; +#2023 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 56.23333333333332700 ) ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 21.73333333333333400 ) ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 18.89999999999999900 ) ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 42.90000000000000600 ) ) ; +#2027 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 37.06666666666666300 ) ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 25.56666666666667000 ) ) ; +#2029 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 57.39999999999998400 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 10.06666666666667400 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 54.06666666666667700 ) ) ; +#2032 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 27.39999999999999900 ) ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 54.39999999999999100 ) ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 27.90000000000000200 ) ) ; +#2035 = ORIENTED_EDGE ( 'NONE', *, *, #2637, .F. ) ; +#2036 = EDGE_CURVE ( 'NONE', #2927, #2562, #4313, .T. ) ; +#2037 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 13.56666666666666800 ) ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 58.39999999999996300 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 21.56666666666666300 ) ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 21.06666666666666600 ) ) ; +#2041 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 45.06666666666667000 ) ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 39.23333333333334100 ) ) ; +#2043 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 27.73333333333333100 ) ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 59.56666666666667700 ) ) ; +#2045 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 12.23333333333334000 ) ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 56.23333333333334100 ) ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 25.23333333333333400 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 56.56666666666667000 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 30.06666666666667400 ) ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 15.73333333333333600 ) ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 60.56666666666667000 ) ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 23.23333333333333800 ) ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 47.23333333333333400 ) ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 41.39999999999999900 ) ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 29.89999999999999900 ) ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 61.73333333333334100 ) ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 14.40000000000000000 ) ) ; +#2058 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 58.39999999999999100 ) ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 23.06666666666666600 ) ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 58.73333333333330600 ) ) ; +#2061 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 32.23333333333332700 ) ) ; +#2062 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 17.89999999999999900 ) ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 62.73333333333333400 ) ) ; +#2064 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 25.40000000000000900 ) ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 49.39999999999999900 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 43.56666666666667000 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 32.06666666666667000 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 63.90000000000002000 ) ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 16.56666666666667400 ) ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 60.56666666666667700 ) ) ; +#2071 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 48.06666666666664200 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 20.90000000000000200 ) ) ; +#2073 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 70.39999999999997700 ) ) ; +#2074 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 34.40000000000001300 ) ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 20.06666666666666600 ) ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 64.90000000000002000 ) ) ; +#2077 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 27.56666666666666600 ) ) ; +#2078 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 51.56666666666666300 ) ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 45.73333333333333400 ) ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 34.23333333333333400 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 66.06666666666666300 ) ) ; +#2082 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 18.73333333333334500 ) ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 12.06666666666665900 ) ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 62.73333333333333400 ) ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 50.23333333333334100 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 18.73333333333333400 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 37.73333333333333400 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 68.23333333333332000 ) ) ; +#2089 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 24.73333333333333400 ) ) ; +#2090 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 36.56666666666666300 ) ) ; +#2091 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 31.23333333333333100 ) ) ; +#2092 = EDGE_CURVE ( 'NONE', #1396, #2562, #4285, .T. ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 22.23333333333333400 ) ) ; +#2094 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 67.06666666666666300 ) ) ; +#2095 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 29.73333333333333800 ) ) ; +#2096 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 53.73333333333332000 ) ) ; +#2097 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 47.89999999999999900 ) ) ; +#2098 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 36.39999999999999900 ) ) ; +#2099 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 68.23333333333334800 ) ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 20.90000000000000900 ) ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 11.90000000000000000 ) ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 64.90000000000003400 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 52.39999999999998400 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 16.56666666666666600 ) ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 66.06666666666666300 ) ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 26.90000000000000900 ) ) ; +#2107 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 38.73333333333329900 ) ) ; +#2108 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 31.06666666666665200 ) ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 24.39999999999998800 ) ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 55.90000000000001300 ) ) ; +#2111 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 50.06666666666667000 ) ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 38.56666666666665600 ) ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 70.40000000000000600 ) ) ; +#2114 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 23.06666666666667400 ) ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 11.73333333333333600 ) ) ; +#2116 = EDGE_CURVE ( 'NONE', #501, #1919, #4266, .T. ) ; +#2117 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 67.06666666666669100 ) ) ; +#2118 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 54.56666666666666300 ) ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 14.39999999999999900 ) ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 63.89999999999999900 ) ) ; +#2121 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 29.06666666666667400 ) ) ; +#2122 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 40.89999999999999900 ) ) ; +#2123 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 30.56666666666666600 ) ) ; +#2124 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 26.56666666666666600 ) ) ; +#2125 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 58.06666666666668400 ) ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 52.23333333333334800 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 40.73333333333334800 ) ) ; +#2128 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 72.56666666666666300 ) ) ; +#2129 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 25.23333333333334500 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 63.56666666666666300 ) ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 11.56666666666666800 ) ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 69.23333333333337700 ) ) ; +#2133 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 56.73333333333334100 ) ) ; +#2134 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 36.56666666666666300 ) ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 69.06666666666667700 ) ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 12.23333333333333400 ) ) ; +#2137 = EDGE_LOOP ( 'NONE', ( #3497, #1342, #3694, #3633, #2729, #3135, #294, #341 ) ) ; +#2138 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 61.73333333333332000 ) ) ; +#2139 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 31.23333333333333100 ) ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 43.06666666666668400 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 30.40000000000000200 ) ) ; +#2142 = ORIENTED_EDGE ( 'NONE', *, *, #2499, .F. ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 70.56666666666672000 ) ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 28.73333333333333400 ) ) ; +#2145 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 60.23333333333334100 ) ) ; +#2146 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 54.40000000000000600 ) ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 42.90000000000000600 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 74.73333333333333400 ) ) ; +#2149 = ORIENTED_EDGE ( 'NONE', *, *, #2092, .F. ) ; +#2150 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 27.40000000000000600 ) ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 65.73333333333333400 ) ) ; +#2152 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 58.89999999999999900 ) ) ; +#2153 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 71.23333333333333400 ) ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 10.06666666666667000 ) ) ; +#2155 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 59.56666666666667000 ) ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 33.39999999999999900 ) ) ; +#2157 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 45.23333333333333400 ) ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 72.73333333333336300 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 30.90000000000000200 ) ) ; +#2160 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 62.40000000000000600 ) ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 56.56666666666667000 ) ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 45.06666666666667000 ) ) ; +#2163 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 76.89999999999999100 ) ) ; +#2164 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 29.56666666666666600 ) ) ; +#2165 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 67.90000000000000600 ) ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 61.06666666666665600 ) ) ; +#2167 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 7.066666666666666400 ) ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 73.40000000000000600 ) ) ; +#2169 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 57.39999999999999100 ) ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 35.56666666666665600 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 74.90000000000004800 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 64.56666666666666300 ) ) ; +#2174 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 58.73333333333333400 ) ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 47.23333333333333400 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 79.06666666666669100 ) ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 31.73333333333333400 ) ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 70.06666666666669100 ) ) ; +#2179 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 63.23333333333333400 ) ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 9.233333333333330700 ) ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 75.56666666666669100 ) ) ; +#2182 = EDGE_CURVE ( 'NONE', #2562, #1969, #4268, .T. ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 55.23333333333332700 ) ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 37.73333333333333400 ) ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( -8.057538417260410300, -0.01177669633889090800, 75.89999999999993500 ) ) ; +#2186 = ADVANCED_FACE ( 'NONE', ( #4218 ), #4209, .T. ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 66.73333333333333400 ) ) ; +#2188 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 60.89999999999999900 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 49.39999999999999900 ) ) ; +#2190 = EDGE_LOOP ( 'NONE', ( #563 ) ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 33.90000000000001300 ) ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 72.23333333333332000 ) ) ; +#2193 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 65.40000000000000600 ) ) ; +#2194 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 11.40000000000000000 ) ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 77.73333333333327700 ) ) ; +#2196 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 59.89999999999999100 ) ) ; +#2197 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 53.06666666666666300 ) ) ; +#2198 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 39.90000000000000600 ) ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( -8.259498014666609900, -3.057036608452647000, 75.90000000000003400 ) ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 68.89999999999999100 ) ) ; +#2201 = EDGE_CURVE ( 'NONE', #3884, #3884, #4213, .T. ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 51.56666666666666300 ) ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 36.06666666666667700 ) ) ; +#2204 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 74.39999999999999100 ) ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 67.56666666666666300 ) ) ; +#2206 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 13.56666666666667000 ) ) ; +#2207 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 79.90000000000000600 ) ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 62.06666666666662700 ) ) ; +#2210 = CARTESIAN_POINT ( 'NONE', ( -9.035186816921994400, -2.901596974540521200, 6.400000000000002100 ) ) ; +#2211 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 50.89999999999999900 ) ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 42.06666666666667000 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( -4.740169134097932600, -7.936017027555858600, 75.89999999999935200 ) ) ; +#2214 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 71.06666666666666300 ) ) ; +#2215 = STYLED_ITEM ( 'NONE', ( #3777 ), #2479 ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 53.73333333333332000 ) ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 38.23333333333335600 ) ) ; +#2218 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 76.56666666666664900 ) ) ; +#2219 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 69.73333333333329200 ) ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 15.73333333333334300 ) ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 9.900000000000000400 ) ) ; +#2222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 64.23333333333333400 ) ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 48.73333333333332000 ) ) ; +#2225 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 44.23333333333333400 ) ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 2.214843668855395600, -9.198557104698817700, 75.89999999999999100 ) ) ; +#2227 = ADVANCED_FACE ( 'NONE', ( #4255 ), #168, .F. ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 73.23333333333332000 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 33.06666666666667000 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 55.90000000000001300 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 40.40000000000002000 ) ) ; +#2232 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 6.566666666666666400 ) ) ; +#2233 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 71.90000000000000600 ) ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 17.89999999999999900 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 12.06666666666666800 ) ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 66.40000000000000600 ) ) ; +#2237 = CARTESIAN_POINT ( 'NONE', ( -9.500000000000005300, -0.9165449946758412700, 6.400000000000001200 ) ) ; +#2238 = EDGE_CURVE ( 'NONE', #1743, #1743, #4223, .T. ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 46.56666666666667000 ) ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 46.39999999999999100 ) ) ; +#2241 = CARTESIAN_POINT ( 'NONE', ( 7.877512099739028900, -5.305816378861735000, 75.89999999999999100 ) ) ; +#2242 = EDGE_LOOP ( 'NONE', ( #967, #976, #979, #1064 ) ) ; +#2243 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 75.39999999999999100 ) ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 35.23333333333333400 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 58.06666666666668400 ) ) ; +#2246 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 8.733333333333327200 ) ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 21.40000000000000200 ) ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 74.06666666666669100 ) ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 20.06666666666666300 ) ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 14.23333333333333400 ) ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#2252 = ADVANCED_FACE ( 'NONE', ( #4232 ), #1862, .F. ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 68.56666666666666300 ) ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( -9.500000000000001800, 0.0000000000000000000, 6.400000000000001200 ) ) ; +#2255 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 44.39999999999999100 ) ) ; +#2256 = CARTESIAN_POINT ( 'NONE', ( 9.270155935347439400, 1.649413012214131300, 75.90000000000000600 ) ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 8.400000000000003900 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 37.40000000000001300 ) ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 60.23333333333334100 ) ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 10.90000000000000000 ) ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 41.39999999999997700 ) ) ; +#2262 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 76.23333333333333400 ) ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 22.23333333333333400 ) ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 16.39999999999999500 ) ) ; +#2265 = PLANE ( 'NONE', #526 ) ; +#2266 = EDGE_CURVE ( 'NONE', #353, #3239, #4179, .T. ) ; +#2267 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 70.73333333333324900 ) ) ; +#2268 = CARTESIAN_POINT ( 'NONE', ( 3.670074322948066600, -7.991602198921957400, 6.400000000000200200 ) ) ; +#2269 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 42.23333333333334100 ) ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( 4.341218354504404100, 7.818779565322831400, 75.89999999999999100 ) ) ; +#2271 = ADVANCED_FACE ( 'NONE', ( #4203 ), #859, .T. ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 10.56666666666666600 ) ) ; +#2273 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 39.56666666666667700 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 62.40000000000000600 ) ) ; +#2275 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 13.06666666666665900 ) ) ; +#2276 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 43.56666666666667000 ) ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 6.233333333333336100 ) ) ; +#2278 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 24.40000000000000200 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 18.56666666666667000 ) ) ; +#2280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2281 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 72.90000000000000600 ) ) ; +#2282 = CARTESIAN_POINT ( 'NONE', ( 3.271943899730763900, -8.217246298539993900, 6.400000000000197500 ) ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 41.39999999999998400 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 40.06666666666667700 ) ) ; +#2285 = CARTESIAN_POINT ( 'NONE', ( 0.01151326903161655300, 8.056927854363882700, 75.90000000000007700 ) ) ; +#2286 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 12.73333333333334000 ) ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 41.73333333333331300 ) ) ; +#2288 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 64.56666666666666300 ) ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 15.23333333333333400 ) ) ; +#2290 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 45.73333333333330600 ) ) ; +#2291 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 21.23333333333333400 ) ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 8.400000000000003900 ) ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 32.39999999999999900 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 26.56666666666667000 ) ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 20.73333333333333800 ) ) ; +#2296 = EDGE_LOOP ( 'NONE', ( #660, #870, #916 ) ) ; +#2297 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2298 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 75.06666666666669100 ) ) ; +#2299 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 43.56666666666668400 ) ) ; +#2300 = EDGE_LOOP ( 'NONE', ( #1601, #1659, #2035, #2142 ) ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 37.90000000000000600 ) ) ; +#2302 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 74.56666666666666300 ) ) ; +#2303 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 14.89999999999999900 ) ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 43.89999999999999100 ) ) ; +#2305 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 66.73333333333333400 ) ) ; +#2306 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 17.39999999999999500 ) ) ; +#2307 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 47.89999999999999900 ) ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 10.56666666666666600 ) ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 34.56666666666666300 ) ) ; +#2310 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 28.73333333333333800 ) ) ; +#2311 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 22.89999999999999900 ) ) ; +#2312 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2313 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 77.23333333333333400 ) ) ; +#2314 = CARTESIAN_POINT ( 'NONE', ( -9.366646044007920200, -1.810948851792497900, 6.399999999999999500 ) ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 45.73333333333334100 ) ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 35.73333333333333400 ) ) ; +#2317 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 72.40000000000000600 ) ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 48.56666666666665600 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 17.06666666666667000 ) ) ; +#2320 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 46.06666666666668400 ) ) ; +#2321 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 68.89999999999999100 ) ) ; +#2322 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 19.56666666666666600 ) ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 77.39999999999999100 ) ) ; +#2324 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 50.06666666666666300 ) ) ; +#2325 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 12.73333333333333400 ) ) ; +#2326 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 36.73333333333333400 ) ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 30.90000000000000900 ) ) ; +#2328 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 19.39999999999999900 ) ) ; +#2330 = EDGE_CURVE ( 'NONE', #353, #1388, #4159, .T. ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 79.40000000000002000 ) ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306700, 2.000000000000000000, -6.000000000000000000 ) ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 47.90000000000002000 ) ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 33.56666666666667000 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 50.73333333333335600 ) ) ; +#2336 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 48.23333333333333400 ) ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 71.06666666666666300 ) ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 21.73333333333333400 ) ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 79.56666666666667700 ) ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 52.23333333333332700 ) ) ; +#2341 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #2998, 'distance_accuracy_value', 'NONE'); +#2342 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 14.89999999999999900 ) ) ; +#2343 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 38.89999999999999100 ) ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 33.06666666666667000 ) ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 21.56666666666667000 ) ) ; +#2346 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 53.40000000000000600 ) ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 50.06666666666667700 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 31.39999999999999900 ) ) ; +#2349 = EDGE_CURVE ( 'NONE', #3081, #3335, #4172, .T. ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 50.39999999999999900 ) ) ; +#2351 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 73.23333333333332000 ) ) ; +#2352 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 23.90000000000000200 ) ) ; +#2353 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 9.566666666666668200 ) ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 54.39999999999999100 ) ) ; +#2355 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 21.06666666666665200 ) ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 17.06666666666667000 ) ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 41.06666666666667000 ) ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 35.23333333333332700 ) ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 23.73333333333334100 ) ) ; +#2360 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 55.56666666666668400 ) ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 8.233333333333337800 ) ) ; +#2362 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 52.23333333333334800 ) ) ; +#2363 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 29.23333333333333400 ) ) ; +#2364 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 52.56666666666666300 ) ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 26.06666666666665200 ) ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 11.73333333333333600 ) ) ; +#2367 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 56.56666666666667000 ) ) ; +#2368 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 20.90000000000000200 ) ) ; +#2369 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 19.23333333333333400 ) ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 43.23333333333333400 ) ) ; +#2371 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 37.40000000000002000 ) ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 25.90000000000000200 ) ) ; +#2373 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 57.73333333333333400 ) ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 10.39999999999999900 ) ) ; +#2375 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 54.40000000000000600 ) ) ; +#2376 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 27.06666666666666600 ) ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 54.73333333333329900 ) ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 28.23333333333333400 ) ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 13.90000000000000000 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 58.73333333333330600 ) ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 20.73333333333332400 ) ) ; +#2382 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 21.40000000000000600 ) ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 45.39999999999999900 ) ) ; +#2384 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 39.56666666666666300 ) ) ; +#2385 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 28.06666666666666600 ) ) ; +#2386 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 59.90000000000001300 ) ) ; +#2387 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 12.56666666666667200 ) ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 56.56666666666667700 ) ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 24.89999999999999900 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 56.89999999999999100 ) ) ; +#2391 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 30.40000000000000200 ) ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 30.23333333333333400 ) ) ; +#2393 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 16.06666666666666300 ) ) ; +#2394 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 60.90000000000000600 ) ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 23.56666666666667400 ) ) ; +#2396 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 47.56666666666666300 ) ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 41.73333333333334800 ) ) ; +#2398 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 30.23333333333333400 ) ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 62.06666666666666300 ) ) ; +#2400 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 14.73333333333333300 ) ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 58.73333333333333400 ) ) ; +#2402 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 22.73333333333332700 ) ) ; +#2403 = VERTEX_POINT ( 'NONE', #2900 ) ; +#2404 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 59.06666666666664200 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 32.56666666666667000 ) ) ; +#2406 = EDGE_CURVE ( 'NONE', #3281, #3335, #4109, .T. ) ; +#2407 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 18.23333333333333400 ) ) ; +#2408 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 63.06666666666666300 ) ) ; +#2409 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 25.73333333333333400 ) ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 49.73333333333332700 ) ) ; +#2411 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 43.89999999999999900 ) ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 32.39999999999999900 ) ) ; +#2413 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 64.23333333333333400 ) ) ; +#2414 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 16.90000000000000900 ) ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 11.39999999999999300 ) ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 60.90000000000002700 ) ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 48.39999999999997000 ) ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 20.56666666666666600 ) ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 70.06666666666663400 ) ) ; +#2420 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 34.73333333333332000 ) ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 20.40000000000000900 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 65.23333333333333400 ) ) ; +#2423 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 27.89999999999999900 ) ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 51.90000000000002000 ) ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 46.06666666666666300 ) ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 34.56666666666666300 ) ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 66.40000000000000600 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 19.06666666666667400 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 8.400000000000003900 ) ) ; +#2430 = EDGE_CURVE ( 'NONE', #3281, #3074, #4114, .T. ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 63.06666666666666300 ) ) ; +#2432 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 50.56666666666667000 ) ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 18.39999999999999900 ) ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 67.90000000000000600 ) ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 25.06666666666667000 ) ) ; +#2436 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 36.90000000000000600 ) ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 30.90000000000000200 ) ) ; +#2438 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 22.56666666666666600 ) ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 67.40000000000000600 ) ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 30.06666666666667000 ) ) ; +#2441 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 54.06666666666669100 ) ) ; +#2442 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 48.23333333333334100 ) ) ; +#2443 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 36.73333333333333400 ) ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 68.56666666666664900 ) ) ; +#2445 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 21.23333333333334100 ) ) ; +#2446 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #2215 ) ) ; +#2447 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 11.23333333333333400 ) ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 65.23333333333334800 ) ) ; +#2449 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 52.73333333333333400 ) ) ; +#2450 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 36.39999999999999900 ) ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 16.23333333333333400 ) ) ; +#2452 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 65.73333333333333400 ) ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 27.23333333333333400 ) ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 39.06666666666666300 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 26.40000000000000600 ) ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 24.73333333333333100 ) ) ; +#2457 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 56.23333333333335600 ) ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 50.40000000000002000 ) ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 38.90000000000000600 ) ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 70.73333333333333400 ) ) ; +#2461 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 23.40000000000000900 ) ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 67.40000000000003400 ) ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 54.89999999999999900 ) ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 14.06666666666666800 ) ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #2116, .T. ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 63.56666666666666300 ) ) ; +#2467 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 29.40000000000000200 ) ) ; +#2468 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 41.23333333333333400 ) ) ; +#2469 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 30.73333333333331300 ) ) ; +#2470 = EDGE_CURVE ( 'NONE', #2403, #3074, #4166, .T. ) ; +#2471 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 26.89999999999999900 ) ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 58.40000000000000600 ) ) ; +#2473 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 52.56666666666666300 ) ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 41.06666666666667000 ) ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 72.90000000000000600 ) ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 25.56666666666667700 ) ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 63.90000000000002000 ) ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 11.06666666666666800 ) ) ; +#2479 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Rear_Adjust', ( #4208, #3544 ), #1760 ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 57.06666666666667000 ) ) ; +#2481 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 36.23333333333333400 ) ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 69.39999999999999100 ) ) ; +#2483 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 11.90000000000000000 ) ) ; +#2484 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 61.39999999999998400 ) ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 31.56666666666666300 ) ) ; +#2486 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 43.40000000000001300 ) ) ; +#2487 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 26.23333333333333400 ) ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 70.90000000000006300 ) ) ; +#2489 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 29.06666666666665200 ) ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 60.56666666666666300 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 54.73333333333334100 ) ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 43.23333333333333400 ) ) ; +#2493 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 75.06666666666666300 ) ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 27.73333333333334100 ) ) ; +#2495 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 66.06666666666666300 ) ) ; +#2496 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 59.23333333333333400 ) ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 71.56666666666666300 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 9.733333333333332500 ) ) ; +#2499 = EDGE_CURVE ( 'NONE', #2403, #3239, #4152, .T. ) ; +#2500 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 59.23333333333333400 ) ) ; +#2501 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 33.73333333333334800 ) ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 45.56666666666666300 ) ) ; +#2503 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 73.06666666666669100 ) ) ; +#2504 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 31.23333333333333100 ) ) ; +#2505 = ADVANCED_FACE ( 'NONE', ( #4054 ), #4252, .T. ) ; +#2506 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 62.73333333333334800 ) ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 56.89999999999999900 ) ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 45.39999999999999900 ) ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 77.23333333333333400 ) ) ; +#2510 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 29.90000000000000600 ) ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 68.23333333333334800 ) ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 61.39999999999997000 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 36.06666666666666300 ) ) ; +#2514 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 7.400000000000002100 ) ) ; +#2515 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 73.73333333333333400 ) ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 57.06666666666667000 ) ) ; +#2517 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 35.89999999999999900 ) ) ; +#2518 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 75.23333333333339100 ) ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 64.89999999999999100 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 59.06666666666667000 ) ) ; +#2521 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 47.56666666666666300 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 79.39999999999999100 ) ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 32.06666666666667700 ) ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 70.40000000000000600 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 63.56666666666666300 ) ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 9.566666666666668200 ) ) ; +#2527 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 75.89999999999999100 ) ) ; +#2528 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 75.90000000000000600 ) ) ; +#2529 = ADVANCED_FACE ( 'NONE', ( #4062, #4046 ), #3251, .F. ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 54.90000000000000600 ) ) ; +#2531 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 38.06666666666667700 ) ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( -8.125255185094170300, -0.06713883963836762800, 75.89999999999945100 ) ) ; +#2533 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 67.06666666666666300 ) ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 61.23333333333332700 ) ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 49.73333333333333400 ) ) ; +#2536 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 34.23333333333334100 ) ) ; +#2537 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 72.56666666666666300 ) ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 65.73333333333332000 ) ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 11.73333333333333400 ) ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 78.06666666666667700 ) ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 60.23333333333333400 ) ) ; +#2542 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 52.73333333333332700 ) ) ; +#2543 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 40.23333333333332700 ) ) ; +#2544 = CARTESIAN_POINT ( 'NONE', ( -7.813279925976175400, -4.353937212114874300, 75.90000000000000600 ) ) ; +#2545 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 69.23333333333332000 ) ) ; +#2546 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 51.90000000000002000 ) ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 36.40000000000001300 ) ) ; +#2548 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 74.73333333333333400 ) ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 67.90000000000000600 ) ) ; +#2550 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 13.90000000000000000 ) ) ; +#2551 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 8.066666666666668200 ) ) ; +#2552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 62.39999999999995600 ) ) ; +#2554 = EDGE_CURVE ( 'NONE', #3872, #3872, #4094, .T. ) ; +#2555 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 50.56666666666666300 ) ) ; +#2556 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 42.39999999999999900 ) ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( -3.763377418989552100, -8.505973966307596600, 75.90000000000002000 ) ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 71.40000000000000600 ) ) ; +#2559 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 54.06666666666669100 ) ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 38.56666666666668400 ) ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 76.89999999999999100 ) ) ; +#2562 = VERTEX_POINT ( 'NONE', #1920 ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 70.06666666666660600 ) ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 16.06666666666667000 ) ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 10.23333333333333400 ) ) ; +#2566 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306700, 2.000000000000000000, -10.00000000000000000 ) ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 64.56666666666666300 ) ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 48.39999999999998400 ) ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 44.56666666666667700 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( 2.875493731176085100, -9.024825833661708400, 75.90000000000004800 ) ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 73.56666666666666300 ) ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 33.39999999999999900 ) ) ; +#2573 = EDGE_CURVE ( 'NONE', #2403, #3074, #4043, .T. ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 56.23333333333334800 ) ) ; +#2575 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 40.73333333333333400 ) ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 6.900000000000000400 ) ) ; +#2577 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 72.23333333333333400 ) ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 18.23333333333333100 ) ) ; +#2579 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 12.40000000000000200 ) ) ; +#2580 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2581 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 66.73333333333336300 ) ) ; +#2582 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 46.23333333333333400 ) ) ; +#2583 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 46.73333333333334100 ) ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 8.234338629800182800, -4.724232694027136000, 75.89999999999997700 ) ) ; +#2585 = ADVANCED_FACE ( 'NONE', ( #4031 ), #1246, .T. ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 75.73333333333333400 ) ) ; +#2587 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 35.56666666666666300 ) ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 58.39999999999999900 ) ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 9.066666666666670000 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 39.56666666666667700 ) ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 74.40000000000002000 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 20.40000000000000200 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 14.56666666666667200 ) ) ; +#2594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 68.90000000000000600 ) ) ; +#2596 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 44.06666666666667000 ) ) ; +#2597 = CARTESIAN_POINT ( 'NONE', ( 8.496890238231284100, 3.781993655013805800, 75.89999999999996300 ) ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 8.733333333333334300 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 37.73333333333333400 ) ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 60.56666666666666300 ) ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 11.23333333333333400 ) ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 41.73333333333331300 ) ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 76.56666666666667700 ) ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 22.56666666666667000 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 16.73333333333333800 ) ) ; +#2606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2607 = ADVANCED_FACE ( 'NONE', ( #3999 ), #2265, .F. ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 71.06666666666662000 ) ) ; +#2609 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306500, 2.000000000000000000, -10.00000000000000000 ) ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 41.89999999999999100 ) ) ; +#2611 = CARTESIAN_POINT ( 'NONE', ( 3.059716427023880100, 8.258705263284849000, 75.89999999999999100 ) ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 10.90000000000000000 ) ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 39.90000000000000600 ) ) ; +#2614 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 62.73333333333334800 ) ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 13.39999999999999900 ) ) ; +#2616 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 43.89999999999999100 ) ) ; +#2617 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 6.566666666666666400 ) ) ; +#2618 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 24.73333333333333400 ) ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 18.89999999999999900 ) ) ; +#2620 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 73.23333333333333400 ) ) ; +#2621 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#2622 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 41.73333333333332700 ) ) ; +#2623 = EDGE_LOOP ( 'NONE', ( #394, #456 ) ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 39.73333333333332700 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( -9.783749972296455700E-014, 8.000000000000000000, 75.89999999999999100 ) ) ; +#2626 = ADVANCED_FACE ( 'NONE', ( #4034 ), #3921, .T. ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 13.06666666666666600 ) ) ; +#2628 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 42.06666666666664200 ) ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 64.89999999999999100 ) ) ; +#2630 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 15.56666666666666600 ) ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 46.06666666666668400 ) ) ; +#2632 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 8.733333333333334300 ) ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 32.73333333333333400 ) ) ; +#2634 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 26.90000000000000900 ) ) ; +#2635 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 21.06666666666666600 ) ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306700, 2.000000000000000000, -10.00000000000000000 ) ) ; +#2637 = EDGE_CURVE ( 'NONE', #3239, #3281, #3985, .T. ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 75.40000000000002000 ) ) ; +#2639 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 43.90000000000001300 ) ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 39.06666666666666300 ) ) ; +#2641 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 37.56666666666666300 ) ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 74.23333333333333400 ) ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 15.23333333333333600 ) ) ; +#2644 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 44.23333333333333400 ) ) ; +#2645 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 67.06666666666666300 ) ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 17.73333333333332000 ) ) ; +#2647 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 75.56666666666667700 ) ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 48.23333333333333400 ) ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 10.90000000000000000 ) ) ; +#2650 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 34.89999999999999900 ) ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 29.06666666666667400 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 23.23333333333333800 ) ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 77.56666666666667700 ) ) ; +#2654 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 46.06666666666665600 ) ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 35.39999999999998400 ) ) ; +#2656 = EDGE_CURVE ( 'NONE', #3335, #353, #4049, .T. ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 72.06666666666664900 ) ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 48.89999999999999900 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 17.40000000000000200 ) ) ; +#2660 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 46.39999999999999900 ) ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 69.23333333333332000 ) ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 19.90000000000000200 ) ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 77.73333333333336300 ) ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 50.39999999999999900 ) ) ; +#2665 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1292, 'distance_accuracy_value', 'NONE'); +#2666 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 13.06666666666666600 ) ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 37.06666666666666300 ) ) ; +#2668 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 31.23333333333333100 ) ) ; +#2669 = SURFACE_SIDE_STYLE ('',( #3893 ) ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 19.73333333333333100 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 79.73333333333336300 ) ) ; +#2672 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 48.23333333333335600 ) ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 33.23333333333333400 ) ) ; +#2674 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #2215 ), #2892 ) ; +#2675 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 51.06666666666666300 ) ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 48.56666666666666300 ) ) ; +#2677 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 71.40000000000000600 ) ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 22.06666666666667400 ) ) ; +#2679 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .F. ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 79.90000000000002000 ) ) ; +#2681 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 52.56666666666666300 ) ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 15.23333333333333600 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 39.23333333333334100 ) ) ; +#2684 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 33.39999999999999900 ) ) ; +#2685 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 21.90000000000000200 ) ) ; +#2686 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 53.73333333333332000 ) ) ; +#2687 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -9.930707588193913200E-014, 75.89999999999999100 ) ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 50.39999999999999900 ) ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 31.06666666666665900 ) ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 50.73333333333334800 ) ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 73.56666666666666300 ) ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 24.23333333333333400 ) ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 9.900000000000000400 ) ) ; +#2694 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 54.73333333333329900 ) ) ; +#2695 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 17.23333333333333400 ) ) ; +#2696 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 17.40000000000000200 ) ) ; +#2697 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 41.39999999999999900 ) ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 35.56666666666665600 ) ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 24.06666666666667000 ) ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 55.90000000000001300 ) ) ; +#2701 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 8.566666666666670000 ) ) ; +#2702 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 52.56666666666667700 ) ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 28.89999999999999900 ) ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 52.90000000000001300 ) ) ; +#2705 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 26.40000000000000600 ) ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 12.06666666666665900 ) ) ; +#2707 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 56.89999999999999100 ) ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 20.56666666666666600 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 19.56666666666666600 ) ) ; +#2710 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 43.56666666666667000 ) ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 37.73333333333333400 ) ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 26.23333333333333400 ) ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 58.06666666666668400 ) ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 10.73333333333333400 ) ) ; +#2715 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 54.73333333333333400 ) ) ; +#2716 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 26.73333333333333400 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 55.06666666666664200 ) ) ; +#2718 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 28.56666666666666600 ) ) ; +#2719 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 14.23333333333333400 ) ) ; +#2720 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 59.06666666666664200 ) ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 20.40000000000000900 ) ) ; +#2722 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 21.73333333333333800 ) ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 45.73333333333333400 ) ) ; +#2724 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 39.89999999999999900 ) ) ; +#2725 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 28.39999999999999500 ) ) ; +#2726 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 60.23333333333334100 ) ) ; +#2727 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 12.90000000000000700 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 56.90000000000000600 ) ) ; +#2729 = ORIENTED_EDGE ( 'NONE', *, *, #2406, .F. ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 24.56666666666666600 ) ) ; +#2731 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 57.23333333333332700 ) ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 30.73333333333331300 ) ) ; +#2733 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 16.39999999999999900 ) ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 61.23333333333333400 ) ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 23.90000000000000200 ) ) ; +#2736 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 47.89999999999999900 ) ) ; +#2737 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 42.06666666666667000 ) ) ; +#2738 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 30.56666666666666600 ) ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 62.40000000000000600 ) ) ; +#2740 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 15.06666666666666800 ) ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 10.90000000000000000 ) ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 59.06666666666665600 ) ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 22.39999999999999100 ) ) ; +#2744 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 59.39999999999999100 ) ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 32.89999999999999900 ) ) ; +#2746 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 18.56666666666667000 ) ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 63.39999999999999900 ) ) ; +#2748 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 26.06666666666667000 ) ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 50.06666666666667000 ) ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 44.23333333333333400 ) ) ; +#2751 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 32.73333333333333400 ) ) ; +#2752 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 64.56666666666666300 ) ) ; +#2753 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 17.23333333333335200 ) ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 10.73333333333333400 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 61.23333333333334800 ) ) ; +#2756 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 48.73333333333330600 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 20.23333333333333100 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 69.73333333333332000 ) ) ; +#2759 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 35.06666666666663400 ) ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 20.73333333333332400 ) ) ; +#2761 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 65.56666666666666300 ) ) ; +#2762 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 28.23333333333333100 ) ) ; +#2763 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 52.23333333333334800 ) ) ; +#2764 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 46.39999999999999100 ) ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 34.89999999999999900 ) ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 66.73333333333333400 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 19.40000000000001300 ) ) ; +#2768 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 10.56666666666666600 ) ) ; +#2769 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 63.39999999999999900 ) ) ; +#2770 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 50.89999999999999900 ) ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 18.06666666666666600 ) ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 67.56666666666666300 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 25.40000000000000200 ) ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 37.23333333333333400 ) ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 30.06666666666667000 ) ) ; +#2776 = ORIENTED_EDGE ( 'NONE', *, *, #2182, .F. ) ; +#2777 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 22.89999999999999900 ) ) ; +#2778 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 67.73333333333334800 ) ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 30.40000000000000200 ) ) ; +#2780 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 54.40000000000000600 ) ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 48.56666666666665600 ) ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 37.06666666666666300 ) ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 68.89999999999999100 ) ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 21.56666666666667400 ) ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 65.56666666666669100 ) ) ; +#2786 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 53.06666666666666300 ) ) ; +#2787 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 15.90000000000000000 ) ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 65.40000000000002000 ) ) ; +#2789 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 27.56666666666666600 ) ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 39.39999999999999900 ) ) ; +#2791 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 29.89999999999999900 ) ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 25.06666666666667400 ) ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 56.56666666666667000 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 50.73333333333333400 ) ) ; +#2795 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 39.23333333333334100 ) ) ; +#2796 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 71.06666666666666300 ) ) ; +#2797 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 23.73333333333333800 ) ) ; +#2798 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 67.73333333333334800 ) ) ; +#2800 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #4311, 'distance_accuracy_value', 'NONE'); +#2801 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 55.23333333333333400 ) ) ; +#2802 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 13.73333333333333300 ) ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 63.23333333333333400 ) ) ; +#2804 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 29.73333333333333800 ) ) ; +#2805 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 41.56666666666667000 ) ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 29.73333333333333400 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 27.23333333333333400 ) ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 58.73333333333333400 ) ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 52.90000000000000600 ) ) ; +#2810 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 41.40000000000000600 ) ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 73.23333333333332000 ) ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 25.90000000000000900 ) ) ; +#2813 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 64.23333333333332000 ) ) ; +#2814 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2815 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 57.39999999999999900 ) ) ; +#2816 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 35.89999999999999900 ) ) ; +#2817 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 69.73333333333329200 ) ) ; +#2818 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 11.56666666666666800 ) ) ; +#2819 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 61.06666666666665600 ) ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 31.89999999999999500 ) ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 43.73333333333333400 ) ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 71.23333333333340500 ) ) ; +#2823 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 29.39999999999998400 ) ) ; +#2824 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 60.89999999999999900 ) ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 55.06666666666667000 ) ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 43.56666666666667000 ) ) ; +#2827 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 75.40000000000000600 ) ) ; +#2828 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 28.06666666666667400 ) ) ; +#2829 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 66.40000000000000600 ) ) ; +#2830 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 59.56666666666666300 ) ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 5.566666666666667300 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 71.90000000000000600 ) ) ; +#2833 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 9.400000000000000400 ) ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 58.89999999999999100 ) ) ; +#2835 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 34.06666666666666300 ) ) ; +#2836 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 45.90000000000000600 ) ) ; +#2837 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 73.40000000000003400 ) ) ; +#2838 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 63.06666666666667700 ) ) ; +#2839 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 57.23333333333333400 ) ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 45.73333333333333400 ) ) ; +#2841 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 77.56666666666664900 ) ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 30.23333333333334100 ) ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 68.56666666666664900 ) ) ; +#2844 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 61.73333333333330600 ) ) ; +#2845 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 35.73333333333333400 ) ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 7.733333333333334300 ) ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 74.06666666666669100 ) ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 56.73333333333332700 ) ) ; +#2849 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 36.23333333333333400 ) ) ; +#2850 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 75.56666666666672000 ) ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 65.23333333333332000 ) ) ; +#2852 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 59.39999999999999900 ) ) ; +#2853 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 47.89999999999999900 ) ) ; +#2854 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 79.73333333333337700 ) ) ; +#2855 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 32.39999999999999100 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 70.73333333333333400 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 63.89999999999999900 ) ) ; +#2858 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 9.900000000000000400 ) ) ; +#2859 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 76.23333333333333400 ) ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 75.90000000000000600 ) ) ; +#2861 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 54.56666666666666300 ) ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 38.39999999999999900 ) ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( -8.206005274041890700, -0.1876537799175436400, 75.90000000000000600 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 67.39999999999999100 ) ) ; +#2865 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 61.56666666666666300 ) ) ; +#2866 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 50.06666666666667000 ) ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 34.56666666666669100 ) ) ; +#2868 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 72.89999999999997700 ) ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 66.06666666666666300 ) ) ; +#2870 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 12.06666666666666800 ) ) ; +#2871 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 78.39999999999999100 ) ) ; +#2872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 60.56666666666667000 ) ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( -9.783749972296455700E-014, 8.000000000000000000, 75.89999999999999100 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 52.39999999999999900 ) ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 40.56666666666667000 ) ) ; +#2877 = CARTESIAN_POINT ( 'NONE', ( -7.267979509239158800, -5.353155743779415100, 75.89999999999986400 ) ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 29.56666666666666600 ) ) ; +#2879 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 69.56666666666666300 ) ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 52.23333333333332700 ) ) ; +#2881 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 36.73333333333334800 ) ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 75.06666666666666300 ) ) ; +#2883 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 68.23333333333332000 ) ) ; +#2884 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 14.23333333333333400 ) ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 8.400000000000003900 ) ) ; +#2886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 62.73333333333333400 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 50.23333333333334800 ) ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 42.73333333333333400 ) ) ; +#2890 = CARTESIAN_POINT ( 'NONE', ( -2.921323758658402900, -8.858608934374670300, 75.90000000000004800 ) ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 71.73333333333333400 ) ) ; +#2892 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2341 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #2998, #974, #3322 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#2893 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 31.56666666666666600 ) ) ; +#2894 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 54.40000000000001300 ) ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 38.90000000000002000 ) ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 5.066666666666667300 ) ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 70.39999999999992000 ) ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 16.40000000000000200 ) ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 10.56666666666666600 ) ) ; +#2900 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306700, -2.000000000000000000, -10.00000000000000000 ) ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 64.90000000000002000 ) ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 48.06666666666664200 ) ) ; +#2903 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 44.90000000000000600 ) ) ; +#2904 = CARTESIAN_POINT ( 'NONE', ( 3.737171536457358600, -8.724994580702903200, 75.90000000000000600 ) ) ; +#2905 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 73.89999999999999100 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 33.73333333333333400 ) ) ; +#2907 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 56.56666666666667000 ) ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 7.233333333333333400 ) ) ; +#2909 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 72.56666666666666300 ) ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 18.56666666666666300 ) ) ; +#2911 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 12.73333333333334000 ) ) ; +#2912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 67.06666666666666300 ) ) ; +#2914 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 45.89999999999999900 ) ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 8.735362987112754500, -3.711884510045014600, 75.89999999999999100 ) ) ; +#2916 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 76.06666666666669100 ) ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 35.89999999999999900 ) ) ; +#2918 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 58.73333333333333400 ) ) ; +#2919 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 9.400000000000003900 ) ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 39.90000000000000600 ) ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 74.73333333333333400 ) ) ; +#2922 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 20.73333333333333800 ) ) ; +#2923 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 14.89999999999999900 ) ) ; +#2924 = ORIENTED_EDGE ( 'NONE', *, *, #1949, .F. ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 69.23333333333333400 ) ) ; +#2927 = VERTEX_POINT ( 'NONE', #1261 ) ; +#2928 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 43.73333333333333400 ) ) ; +#2929 = CARTESIAN_POINT ( 'NONE', ( 7.803208232335436800, 4.950428804666883800, 75.90000000000000600 ) ) ; +#2930 = ORIENTED_EDGE ( 'NONE', *, *, #1967, .F. ) ; +#2931 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 9.066666666666666400 ) ) ; +#2932 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 38.06666666666665600 ) ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 60.89999999999999900 ) ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 11.56666666666666600 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 42.06666666666664200 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 76.89999999999999100 ) ) ; +#2937 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 22.89999999999999900 ) ) ; +#2938 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 17.06666666666667000 ) ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 71.40000000000000600 ) ) ; +#2940 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 41.56666666666667000 ) ) ; +#2941 = CARTESIAN_POINT ( 'NONE', ( 1.708042611707546900, 8.452434986158872100, 75.90000000000003400 ) ) ; +#2942 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 11.23333333333333400 ) ) ; +#2943 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 40.23333333333332700 ) ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 63.06666666666667700 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 13.73333333333332500 ) ) ; +#2946 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 44.23333333333333400 ) ) ; +#2947 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 20.23333333333333100 ) ) ; +#2948 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 6.900000000000000400 ) ) ; +#2949 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 25.06666666666667000 ) ) ; +#2950 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 19.23333333333333100 ) ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( -17.86150478919523700, 2.000000000000000000, -6.000000000000000000 ) ) ; +#2952 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 73.56666666666666300 ) ) ; +#2953 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 42.06666666666667000 ) ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 39.40000000000000600 ) ) ; +#2955 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -9.930707588193913200E-014, 75.89999999999999100 ) ) ; +#2956 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 13.40000000000000200 ) ) ; +#2957 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 42.39999999999996300 ) ) ; +#2958 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 65.23333333333333400 ) ) ; +#2959 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 15.90000000000000000 ) ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 46.39999999999999900 ) ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 20.06666666666666600 ) ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 9.066666666666666400 ) ) ; +#2963 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 33.06666666666667000 ) ) ; +#2964 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 27.23333333333333400 ) ) ; +#2965 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 21.40000000000000600 ) ) ; +#2966 = FILL_AREA_STYLE_COLOUR ( '', #1759 ) ; +#2967 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 75.73333333333332000 ) ) ; +#2968 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 44.23333333333334800 ) ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 37.23333333333333400 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 73.90000000000000600 ) ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 47.06666666666665600 ) ) ; +#2972 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 15.56666666666666800 ) ) ; +#2973 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 44.56666666666667000 ) ) ; +#2974 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 67.39999999999999100 ) ) ; +#2975 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 18.06666666666666600 ) ) ; +#2976 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 75.89999999999997700 ) ) ; +#2977 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 48.56666666666666300 ) ) ; +#2978 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 2, ( #2955, #4187, #1267, #3605, #1606, #3939, #1953, #4301, #2302, #271, #2642, #613, #2970, #946, #3296, #1280, #3619, #1621, #3953, #1968, #4316, #2317, #290, #2657, #629, #2987, #962, #3311, #3399, #1386, #3723, #1731, #4066, #2073, #51, #2419, #397, #2758, #729, #3087, #1062, #3413, #1402, #3737, #1746, #4080, #2088, #66, #2434, #411, #2772, #744, #3101, #1079, #3428, #1417, #3753, #1765, #4098, #2105, #84, #2452, #427, #2788, #760, #3117, #1094, #3443, #1432, #3768, #1779, #4117, #2120, #98, #2466, #441, #2803, #776, #3132, #1109, #3458, #1448, #3787, #1797, #4134, #2138, #113, #2484, #458, #2819, #791, #3149, #1126, #3474, #1465, #3803, #1812, #4149, #2155, #129, #2500, #472, #2834, #807, #3165, #1144, #3489, #1481, #3819, #1828, #4169, #2170, #144, #2516, #485, #2848, #822, #3178, #1158, #3505, #1496, #3832, #1841, #4185, #2183, #157, #2530, #498, #2861, #835, #3191, #1170, #3517, #1509, #3844, #1852, #4196, #2197, #170, #2542, #512, #2875, #848, #3204, #1185, #3529, #1521, #3857, #1866, #4210, #2211, #184, #2555, #527, #2888, #862, #3216, #1198, #3540, #1535, #3870, #1879, #4226, #2224, #197, #2568, #542, #2902, #877, #3229, #1211, #3553, #1550, #3885, #1895, #4241, #2239, #212, #2582, #556, #2914, #889, #3241, #1223, #3565, #1564, #3899, #1908, #4254, #2255, #227, #2596, #572, #2928, #901, #3253, #1236, #3577, #1577, #3911, #1923, #4269, #2269, #241, #2610, #585, #2940, #914, #3265, #1249, #3589, #1589, #3923, #1936, #4284, #2284, #254, #2624, #598, #2954, #930, #3280, #1266, #3604, #1605, #3938, #1952, #4300, #2301, #270, #2641, #612, #2969, #945, #3295, #1279, #3618, #1620, #3952, #1966, #4315, #2316, #289, #2655, #628, #2986, #961, #3310, #1296, #3634, #1639, #3967, #1986, #4332, #2334, #309, #2673, #645, #3001, #980, #3325, #1313, #3650, #1655, #3983, #2001, #4349, #2348, #323, #2689, #661, #3015, #994, #3341, #1328, #3665, #1673, #4001, #2016, #4363, #2363, #337, #2703, #675, #3029, #1008, #3356, #1343, #3679, #1687, #4017, #2032, #11, #2376, #354, #2716, #688, #3044, #1021, #3369, #1356, #3693, #1700, #4030, #2047, #24, #2389, #367, #2730, #701, #3057, #1034, #3382, #1369, #3707, #1714, #4047, #2059, #36, #2402, #381, #2743, #715, #3071, #1049, #3398, #1385, #3722, #1729, #4065, #2072, #50, #2418, #396, #2757, #728, #3086, #1061, #3412, #1401, #3736, #1745, #4079, #2086, #65, #2433, #410, #2771, #743, #3100, #1078, #3427, #1416, #3752, #1764, #4096, #2104, #83, #2451, #426, #2787, #759, #3116, #1093, #3442, #1430, #3767, #1778, #4113, #2119, #97, #2464, #440, #2802, #775, #3131, #1108, #3457, #1447, #3786, #1796, #4133, #2136, #112, #2483, #457, #2818, #790, #3148, #1125, #3473, #1463, #3802, #1811, #4148, #2154, #127, #2498, #471, #2833, #806, #3164, #1143, #3488, #1480, #3818, #1827, #4167, #2169 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.05555555555555558000, 0.06018518518518523000, 0.06481481481481477000, 0.06944444444444442000, 0.07407407407407407000, 0.07870370370370372000, 0.08333333333333337000, 0.08796296296296291000, 0.09259259259259256000, 0.09722222222222221000, 0.1018518518518518600, 0.1064814814814815100, 0.1111111111111111600, 0.1157407407407407000, 0.1203703703703703500, 0.1250000000000000000, 0.1296296296296296500, 0.1342592592592593000, 0.1388888888888888400, 0.1435185185185184900, 0.1481481481481481400, 0.1527777777777777900, 0.1574074074074074400, 0.1620370370370370900, 0.1666666666666666300, 0.1712962962962962800, 0.1759259259259259300, 0.1805555555555555800, 0.1851851851851852300, 0.1898148148148147700, 0.1944444444444444200, 0.1990740740740740700, 0.2037037037037037200, 0.2083333333333333700, 0.2129629629629629100, 0.2175925925925925600, 0.2222222222222222100, 0.2268518518518518600, 0.2314814814814815100, 0.2361111111111111600, 0.2407407407407407000, 0.2453703703703703500, 0.2500000000000000000, 0.2546296296296296500, 0.2592592592592593000, 0.2638888888888888400, 0.2685185185185184900, 0.2731481481481481400, 0.2777777777777777900, 0.2824074074074074400, 0.2870370370370370900, 0.2916666666666666300, 0.2962962962962962800, 0.3009259259259259300, 0.3055555555555555800, 0.3101851851851852300, 0.3148148148148147700, 0.3194444444444444200, 0.3240740740740740700, 0.3287037037037037200, 0.3333333333333333700, 0.3379629629629629100, 0.3425925925925925600, 0.3472222222222222100, 0.3518518518518518600, 0.3564814814814815100, 0.3611111111111111600, 0.3657407407407407000, 0.3703703703703703500, 0.3750000000000000000, 0.3796296296296296500, 0.3842592592592593000, 0.3888888888888888400, 0.3935185185185184900, 0.3981481481481481400, 0.4027777777777777900, 0.4074074074074074400, 0.4120370370370370900, 0.4166666666666666900, 0.4212962962962962800, 0.4259259259259259300, 0.4305555555555555200, 0.4351851851851852300, 0.4398148148148147700, 0.4444444444444444200, 0.4490740740740740700, 0.4537037037037037200, 0.4583333333333333700, 0.4629629629629629100, 0.4675925925925925600, 0.4722222222222222100, 0.4768518518518518600, 0.4814814814814815100, 0.4861111111111111600, 0.4907407407407407000, 0.4953703703703703500, 0.5000000000000000000, 0.5046296296296296500, 0.5092592592592593000, 0.5138888888888888400, 0.5185185185185186000, 0.5231481481481481400, 0.5277777777777777900, 0.5324074074074074400, 0.5370370370370369800, 0.5416666666666667400, 0.5462962962962962800, 0.5509259259259259300, 0.5555555555555555800, 0.5601851851851851200, 0.5648148148148148800, 0.5694444444444444200, 0.5740740740740740700, 0.5787037037037037200, 0.5833333333333332600, 0.5879629629629630200, 0.5925925925925925600, 0.5972222222222222100, 0.6018518518518518600, 0.6064814814814814000, 0.6111111111111111600, 0.6157407407407407000, 0.6203703703703702400, 0.6250000000000000000, 0.6296296296296296500, 0.6342592592592593000, 0.6388888888888888400, 0.6435185185185186000, 0.6481481481481481400, 0.6527777777777777900, 0.6574074074074074400, 0.6620370370370369800, 0.6666666666666667400, 0.6712962962962962800, 0.6759259259259259300, 0.6805555555555555800, 0.6851851851851851200, 0.6898148148148148800, 0.6944444444444444200, 0.6990740740740740700, 0.7037037037037037200, 0.7083333333333332600, 0.7129629629629630200, 0.7175925925925925600, 0.7222222222222222100, 0.7268518518518519700, 0.7314814814814814000, 0.7361111111111111600, 0.7407407407407407000, 0.7453703703703703500, 0.7500000000000000000, 0.7546296296296296500, 0.7592592592592593000, 0.7638888888888888400, 0.7685185185185184900, 0.7731481481481481400, 0.7777777777777777900, 0.7824074074074074400, 0.7870370370370369800, 0.7916666666666666300, 0.7962962962962962800, 0.8009259259259259300, 0.8055555555555554700, 0.8101851851851851200, 0.8148148148148148800, 0.8194444444444444200, 0.8240740740740740700, 0.8287037037037037200, 0.8333333333333333700, 0.8379629629629630200, 0.8425925925925925600, 0.8472222222222222100, 0.8518518518518518600, 0.8564814814814815100, 0.8611111111111111600, 0.8657407407407407000, 0.8703703703703703500, 0.8750000000000000000, 0.8796296296296296500, 0.8842592592592591900, 0.8888888888888888400, 0.8935185185185184900, 0.8981481481481481400, 0.9027777777777777900, 0.9074074074074074400, 0.9120370370370369800, 0.9166666666666666300, 0.9212962962962962800, 0.9259259259259259300, 0.9305555555555555800, 0.9351851851851852300, 0.9398148148148147700, 0.9444444444444444200, 0.9490740740740740700, 0.9537037037037037200, 0.9583333333333333700, 0.9629629629629630200, 0.9675925925925925600, 0.9722222222222222100, 0.9768518518518518600, 0.9814814814814815100, 0.9861111111111111600, 0.9907407407407407000, 0.9953703703703703500, 1.000000000000000000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2979 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 11.23333333333333400 ) ) ; +#2980 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 35.23333333333332700 ) ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 29.40000000000000200 ) ) ; +#2982 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 23.56666666666667400 ) ) ; +#2983 = FILL_AREA_STYLE_COLOUR ( '', #3785 ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 77.89999999999999100 ) ) ; +#2985 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 46.40000000000000600 ) ) ; +#2986 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 35.06666666666664900 ) ) ; +#2987 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 71.73333333333333400 ) ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 49.23333333333334100 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 17.73333333333333400 ) ) ; +#2990 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 46.73333333333333400 ) ) ; +#2991 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 69.56666666666666300 ) ) ; +#2992 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 20.23333333333333100 ) ) ; +#2993 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 78.06666666666669100 ) ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 50.73333333333334800 ) ) ; +#2995 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 13.39999999999999900 ) ) ; +#2996 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 37.40000000000002000 ) ) ; +#2997 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 31.56666666666666300 ) ) ; +#2998 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#2999 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 20.06666666666666300 ) ) ; +#3000 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 48.56666666666669800 ) ) ; +#3001 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 32.89999999999999900 ) ) ; +#3002 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 51.40000000000001300 ) ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 48.89999999999999900 ) ) ; +#3004 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 71.73333333333333400 ) ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 22.39999999999998800 ) ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 8.066666666666668200 ) ) ; +#3007 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 52.90000000000001300 ) ) ; +#3008 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 15.56666666666666800 ) ) ; +#3009 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 39.56666666666666300 ) ) ; +#3010 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 33.73333333333334100 ) ) ; +#3011 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 22.23333333333333400 ) ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 54.06666666666669100 ) ) ; +#3013 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 6.733333333333336100 ) ) ; +#3014 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 50.73333333333335600 ) ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 30.73333333333332700 ) ) ; +#3016 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 51.06666666666666300 ) ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 73.89999999999999100 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 24.56666666666666600 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 10.23333333333333400 ) ) ; +#3020 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 55.06666666666664200 ) ) ; +#3021 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 19.90000000000000200 ) ) ; +#3022 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 17.73333333333333400 ) ) ; +#3023 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 41.73333333333334800 ) ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 35.89999999999999900 ) ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 24.40000000000000200 ) ) ; +#3026 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 56.23333333333334800 ) ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 8.900000000000009200 ) ) ; +#3028 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 52.90000000000002000 ) ) ; +#3029 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 28.56666666666666600 ) ) ; +#3030 = CLOSED_SHELL ( 'NONE', ( #2505, #1910, #2186, #2585, #1851, #1891, #1933, #2271, #2529, #2252, #2626, #2227, #2607 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 53.23333333333332700 ) ) ; +#3032 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 26.73333333333333400 ) ) ; +#3033 = ORIENTED_EDGE ( 'NONE', *, *, #2116, .F. ) ; +#3034 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 12.40000000000000400 ) ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 57.23333333333332700 ) ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 19.73333333333333800 ) ) ; +#3037 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 19.90000000000000200 ) ) ; +#3038 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 43.89999999999999900 ) ) ; +#3039 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 38.06666666666667700 ) ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 26.56666666666666600 ) ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 58.39999999999999900 ) ) ; +#3042 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 11.06666666666667000 ) ) ; +#3043 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 55.06666666666667700 ) ) ; +#3044 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 26.39999999999999900 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 55.39999999999997700 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 28.90000000000000200 ) ) ; +#3047 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 14.56666666666666600 ) ) ; +#3048 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 59.39999999999999100 ) ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 19.56666666666666600 ) ) ; +#3050 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 22.06666666666667400 ) ) ; +#3051 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 46.06666666666666300 ) ) ; +#3052 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 40.23333333333333400 ) ) ; +#3053 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 28.73333333333333800 ) ) ; +#3054 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 60.56666666666666300 ) ) ; +#3055 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 13.23333333333333600 ) ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 57.23333333333333400 ) ) ; +#3057 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 24.23333333333333100 ) ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 57.56666666666667000 ) ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 31.06666666666665200 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 16.73333333333334100 ) ) ; +#3061 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 61.56666666666667000 ) ) ; +#3062 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 24.23333333333333400 ) ) ; +#3063 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 48.23333333333334100 ) ) ; +#3064 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 42.39999999999999900 ) ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 30.90000000000000900 ) ) ; +#3066 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 62.73333333333334800 ) ) ; +#3067 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 15.39999999999999700 ) ) ; +#3068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 59.39999999999998400 ) ) ; +#3070 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 46.89999999999999900 ) ) ; +#3071 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 22.06666666666667000 ) ) ; +#3072 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 59.73333333333333400 ) ) ; +#3073 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 33.23333333333332700 ) ) ; +#3074 = VERTEX_POINT ( 'NONE', #4297 ) ; +#3075 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 18.89999999999999900 ) ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 63.73333333333333400 ) ) ; +#3077 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 26.39999999999999900 ) ) ; +#3078 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 50.40000000000002000 ) ) ; +#3079 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 44.56666666666666300 ) ) ; +#3080 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 33.06666666666667000 ) ) ; +#3081 = VERTEX_POINT ( 'NONE', #2636 ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 64.89999999999999100 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 17.56666666666668100 ) ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 61.56666666666667700 ) ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 49.06666666666662700 ) ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 19.90000000000000200 ) ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 69.39999999999999100 ) ) ; +#3088 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 35.39999999999997000 ) ) ; +#3089 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 21.06666666666665200 ) ) ; +#3090 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 65.90000000000000600 ) ) ; +#3091 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 28.56666666666667400 ) ) ; +#3092 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 52.56666666666666300 ) ) ; +#3093 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 46.73333333333334100 ) ) ; +#3094 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 35.23333333333332700 ) ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 67.06666666666666300 ) ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 19.73333333333334100 ) ) ; +#3097 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 6.400000000000001200 ) ) ; +#3098 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 63.73333333333333400 ) ) ; +#3099 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 51.23333333333333400 ) ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 17.73333333333332700 ) ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 67.23333333333332000 ) ) ; +#3102 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 25.73333333333333400 ) ) ; +#3103 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 37.56666666666666300 ) ) ; +#3104 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 25.89999999999999900 ) ) ; +#3105 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 23.23333333333333400 ) ) ; +#3106 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 30.73333333333334500 ) ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 54.73333333333334100 ) ) ; +#3108 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 48.89999999999999900 ) ) ; +#3109 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 37.40000000000002000 ) ) ; +#3110 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 69.23333333333332000 ) ) ; +#3111 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 21.90000000000000600 ) ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#3113 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 65.90000000000004800 ) ) ; +#3114 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2687, #321, #2185, #159, #2532, #500, #2863, #837, #3193, #1172, #3519, #1511, #3846, #1854, #4198, #2199, #172, #2544, #514, #2877, #850, #3206, #1187, #3531, #1523, #3859, #1868, #4212, #2213, #186, #2557, #529, #2890, #864, #3218, #1200, #3542, #1537, #3873, #1881, #4228, #2226, #199, #2570, #544, #2904, #879, #3231, #1213, #3555, #1552, #3887, #1897, #4243, #2241, #214, #2584, #558, #2915, #890, #3242, #1224, #3566, #1565, #3900, #1909, #4256, #2256, #228, #2597, #573, #2929, #902, #3254, #1237, #3578, #1578, #3912, #1924, #4270, #2270, #242, #2611, #586, #2941, #915, #3266, #1250, #3590, #1590, #3924, #1937, #4286, #2285, #255, #2625 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.764139836694302300E-017, 8.734415605257281000E-005, 0.0001746883121051279800, 0.0003493766242102382800, 0.0006987532484204568200, 0.001397506496840893700, 0.002096259745261331000, 0.002795012993681767000, 0.004192519490522639500, 0.005590025987363511500, 0.006288779235783949200, 0.006987532484204386900, 0.008385038981045259800, 0.009083792229465695000, 0.009782545477886130100, 0.01118005197472700000, 0.01187880522314743700, 0.01257755847156787400, 0.01397506496840874600, 0.01537257146524962000, 0.01677007796209049200, 0.01746883121051092900, 0.01816758445893136600, 0.01956509095577223600, 0.02096259745261311000, 0.02236010394945398000, 0.02375761044629485400, 0.02445636369471529100, 0.02515511694313572400, 0.02655262343997659800, 0.02795012993681747100, 0.02934763643365834200, 0.03004638968207877900, 0.03074514293049921500, 0.03354015592418096300, 0.03493766242102183700, 0.03633516891786271000, 0.03703392216628314400, 0.03773267541470358400, 0.03913018191154445800, 0.04052768840838532500, 0.04192519490522619900, 0.04332270140206707200, 0.04402145465048751300, 0.04437083127469772900, 0.04454551958680284100, 0.04463286374285539700, 0.04472020789890794600 ), + .UNSPECIFIED. ) ; +#3115 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 53.39999999999999900 ) ) ; +#3116 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 15.56666666666666600 ) ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 65.06666666666666300 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 27.89999999999999900 ) ) ; +#3119 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 39.73333333333333400 ) ) ; +#3120 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 29.39999999999998400 ) ) ; +#3121 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 25.39999999999999900 ) ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 56.89999999999999900 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 51.06666666666667700 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 39.56666666666666300 ) ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 71.40000000000000600 ) ) ; +#3126 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 24.06666666666666300 ) ) ; +#3127 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 62.40000000000000600 ) ) ; +#3128 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 68.06666666666669100 ) ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 55.56666666666667700 ) ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 67.90000000000000600 ) ) ; +#3131 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 13.40000000000000000 ) ) ; +#3132 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 62.89999999999999900 ) ) ; +#3133 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 30.06666666666667000 ) ) ; +#3134 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 41.89999999999999900 ) ) ; +#3135 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .T. ) ; +#3136 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 69.39999999999999100 ) ) ; +#3137 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 27.56666666666666600 ) ) ; +#3138 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 59.06666666666667000 ) ) ; +#3139 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 53.23333333333333400 ) ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 41.73333333333334800 ) ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 73.56666666666666300 ) ) ; +#3142 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 26.23333333333334100 ) ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 64.56666666666666300 ) ) ; +#3144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 57.73333333333332000 ) ) ; +#3146 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 35.56666666666666300 ) ) ; +#3147 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 70.06666666666660600 ) ) ; +#3148 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 11.23333333333333400 ) ) ; +#3149 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 60.73333333333333400 ) ) ; +#3150 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 32.23333333333333400 ) ) ; +#3151 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 44.06666666666666300 ) ) ; +#3152 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 71.56666666666672000 ) ) ; +#3153 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 29.73333333333333400 ) ) ; +#3154 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 61.23333333333332700 ) ) ; +#3155 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 55.40000000000000600 ) ) ; +#3156 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 43.89999999999999100 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 75.73333333333333400 ) ) ; +#3158 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 28.39999999999999900 ) ) ; +#3159 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 66.73333333333333400 ) ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 59.89999999999999900 ) ) ; +#3161 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 34.56666666666666300 ) ) ; +#3162 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 5.900000000000002100 ) ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 72.23333333333333400 ) ) ; +#3164 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 9.066666666666666400 ) ) ; +#3165 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 58.56666666666667000 ) ) ; +#3166 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 34.39999999999999900 ) ) ; +#3167 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 46.23333333333333400 ) ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 73.73333333333334800 ) ) ; +#3169 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 63.39999999999999100 ) ) ; +#3170 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 57.56666666666666300 ) ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 46.06666666666667700 ) ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 77.89999999999999100 ) ) ; +#3173 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 30.56666666666667700 ) ) ; +#3174 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 68.89999999999999100 ) ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 62.06666666666663400 ) ) ; +#3176 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 8.066666666666666400 ) ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 74.40000000000003400 ) ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 56.40000000000000600 ) ) ; +#3179 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 36.56666666666666300 ) ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( -9.783749972296455700E-014, 8.000000000000000000, 75.89999999999999100 ) ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 65.56666666666664900 ) ) ; +#3182 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 59.73333333333332700 ) ) ; +#3183 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 48.23333333333334100 ) ) ; +#3184 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 4.900000000000000400 ) ) ; +#3185 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 32.73333333333334100 ) ) ; +#3186 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 71.06666666666666300 ) ) ; +#3187 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 64.23333333333332000 ) ) ; +#3188 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 10.23333333333333400 ) ) ; +#3189 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 76.56666666666667700 ) ) ; +#3190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3191 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 54.23333333333332700 ) ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 38.73333333333332700 ) ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( -8.309634489876117400, -0.4570891915428542100, 75.90000000000003400 ) ) ; +#3194 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 67.73333333333334800 ) ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 61.89999999999999100 ) ) ; +#3196 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 50.40000000000002000 ) ) ; +#3197 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 34.90000000000002700 ) ) ; +#3198 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 73.23333333333332000 ) ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 66.40000000000000600 ) ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 12.40000000000000200 ) ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 78.73333333333333400 ) ) ; +#3202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 60.90000000000000600 ) ) ; +#3204 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 52.06666666666665600 ) ) ; +#3205 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 40.90000000000001300 ) ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( -6.880546123963958000, -5.918818618106013400, 75.89999999999999100 ) ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 69.90000000000000600 ) ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 52.56666666666666300 ) ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 37.06666666666668400 ) ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 75.39999999999999100 ) ) ; +#3211 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 68.56666666666666300 ) ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 14.56666666666667200 ) ) ; +#3213 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 8.733333333333334300 ) ) ; +#3214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 63.06666666666666300 ) ) ; +#3216 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 49.89999999999999900 ) ) ; +#3217 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 43.06666666666667700 ) ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( -2.272478973748460100, -9.071424908202720500, 75.90000000000000600 ) ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 72.06666666666666300 ) ) ; +#3220 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 31.89999999999999900 ) ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 54.73333333333332700 ) ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 39.23333333333333400 ) ) ; +#3223 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 5.400000000000000400 ) ) ; +#3224 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 70.73333333333324900 ) ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 16.73333333333333800 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 10.90000000000000000 ) ) ; +#3227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 65.23333333333333400 ) ) ; +#3229 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 47.73333333333333400 ) ) ; +#3230 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 45.23333333333334100 ) ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 4.946979838105515400, -8.114269254137763500, 75.90000000000002000 ) ) ; +#3232 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 74.23333333333333400 ) ) ; +#3233 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 34.06666666666666300 ) ) ; +#3234 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 56.89999999999999100 ) ) ; +#3235 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 7.566666666666667300 ) ) ; +#3236 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 72.89999999999999100 ) ) ; +#3237 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 18.89999999999999900 ) ) ; +#3238 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 13.06666666666666600 ) ) ; +#3239 = VERTEX_POINT ( 'NONE', #266 ) ; +#3240 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 67.40000000000000600 ) ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 45.56666666666667000 ) ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 9.160693858218483100, -2.412720102588541000, 75.89999999999997700 ) ) ; +#3243 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 76.39999999999999100 ) ) ; +#3244 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 36.23333333333333400 ) ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 59.06666666666667000 ) ) ; +#3246 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 9.733333333333325400 ) ) ; +#3247 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 40.23333333333332700 ) ) ; +#3248 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 75.06666666666669100 ) ) ; +#3249 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 21.06666666666666600 ) ) ; +#3250 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 15.23333333333333600 ) ) ; +#3251 = PLANE ( 'NONE', #196 ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 69.56666666666666300 ) ) ; +#3253 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 43.39999999999999100 ) ) ; +#3254 = CARTESIAN_POINT ( 'NONE', ( 7.085060053990920500, 5.827694985418470500, 75.90000000000000600 ) ) ; +#3255 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 9.400000000000002100 ) ) ; +#3256 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 38.39999999999996300 ) ) ; +#3257 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 61.23333333333332700 ) ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 11.90000000000000000 ) ) ; +#3259 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 42.39999999999996300 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 5.066666666666667300 ) ) ; +#3261 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 23.23333333333333800 ) ) ; +#3262 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 17.40000000000000200 ) ) ; +#3263 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 75.90000000000000600 ) ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 71.73333333333333400 ) ) ; +#3265 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 41.23333333333332700 ) ) ; +#3266 = CARTESIAN_POINT ( 'NONE', ( 0.7891830252670113400, 8.388595167423517300, 75.90000000000002000 ) ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 11.56666666666666800 ) ) ; +#3268 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 40.56666666666667000 ) ) ; +#3269 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 63.39999999999999100 ) ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 14.06666666666666800 ) ) ; +#3271 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 44.56666666666667000 ) ) ; +#3272 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 16.73333333333334100 ) ) ; +#3273 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 7.233333333333336100 ) ) ; +#3274 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 31.23333333333333100 ) ) ; +#3275 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 25.40000000000000900 ) ) ; +#3276 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 19.56666666666666600 ) ) ; +#3277 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 73.90000000000000600 ) ) ; +#3279 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 42.39999999999999900 ) ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 39.06666666666666300 ) ) ; +#3281 = VERTEX_POINT ( 'NONE', #608 ) ; +#3282 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 13.73333333333333800 ) ) ; +#3283 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 42.73333333333332700 ) ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 65.56666666666664900 ) ) ; +#3285 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 16.23333333333333100 ) ) ; +#3286 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 46.73333333333333400 ) ) ; +#3287 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 19.39999999999998100 ) ) ; +#3288 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 9.400000000000002100 ) ) ; +#3289 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 33.39999999999999900 ) ) ; +#3290 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 27.56666666666666600 ) ) ; +#3291 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 21.73333333333333800 ) ) ; +#3292 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3293 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 76.06666666666663400 ) ) ; +#3294 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 44.56666666666667700 ) ) ; +#3295 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 36.90000000000000600 ) ) ; +#3296 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 73.56666666666666300 ) ) ; +#3297 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 47.39999999999999900 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 15.90000000000000000 ) ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 44.90000000000000600 ) ) ; +#3300 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 67.73333333333334800 ) ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 18.40000000000000600 ) ) ; +#3302 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 76.23333333333333400 ) ) ; +#3303 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 48.89999999999999900 ) ) ; +#3304 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 11.56666666666666600 ) ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 35.56666666666665600 ) ) ; +#3306 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 29.73333333333333800 ) ) ; +#3307 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 23.90000000000000200 ) ) ; +#3308 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 78.23333333333333400 ) ) ; +#3309 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 46.73333333333334100 ) ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 34.73333333333333400 ) ) ; +#3311 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 71.40000000000000600 ) ) ; +#3312 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 49.56666666666666300 ) ) ; +#3313 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 18.06666666666666600 ) ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 47.06666666666667000 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 69.90000000000000600 ) ) ; +#3316 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 20.56666666666666600 ) ) ; +#3317 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 78.40000000000000600 ) ) ; +#3318 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 51.06666666666666300 ) ) ; +#3319 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 13.73333333333333800 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 37.73333333333333400 ) ) ; +#3321 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 31.89999999999999500 ) ) ; +#3322 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#3323 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 20.40000000000000200 ) ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 48.90000000000002000 ) ) ; +#3325 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 32.56666666666667000 ) ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 51.73333333333332700 ) ) ; +#3327 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 49.23333333333333400 ) ) ; +#3328 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 72.06666666666666300 ) ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 22.73333333333332000 ) ) ; +#3330 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 8.400000000000003900 ) ) ; +#3331 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 53.23333333333332700 ) ) ; +#3332 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 15.90000000000000000 ) ) ; +#3333 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 39.89999999999999900 ) ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 34.06666666666667000 ) ) ; +#3335 = VERTEX_POINT ( 'NONE', #941 ) ; +#3336 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 22.56666666666666600 ) ) ; +#3337 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 54.40000000000001300 ) ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 7.066666666666669100 ) ) ; +#3339 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 51.06666666666667700 ) ) ; +#3340 = ORIENTED_EDGE ( 'NONE', *, *, #2012, .F. ) ; +#3341 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 30.39999999999999900 ) ) ; +#3342 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 38.39999999999996300 ) ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 51.39999999999997700 ) ) ; +#3344 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 74.23333333333333400 ) ) ; +#3345 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 24.90000000000000200 ) ) ; +#3346 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 10.56666666666666600 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 55.39999999999997700 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 19.23333333333333100 ) ) ; +#3349 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 18.06666666666666600 ) ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 42.06666666666667000 ) ) ; +#3351 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 36.23333333333333400 ) ) ; +#3352 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 24.73333333333333400 ) ) ; +#3353 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 56.56666666666667000 ) ) ; +#3354 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 9.233333333333339600 ) ) ; +#3355 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 53.23333333333336300 ) ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 28.23333333333333400 ) ) ; +#3357 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 53.56666666666666300 ) ) ; +#3358 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 27.06666666666667400 ) ) ; +#3359 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 12.73333333333333400 ) ) ; +#3360 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 57.56666666666667000 ) ) ; +#3361 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 19.06666666666665900 ) ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 20.23333333333333800 ) ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 44.23333333333333400 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 38.39999999999999900 ) ) ; +#3365 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 26.90000000000000900 ) ) ; +#3366 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 58.73333333333333400 ) ) ; +#3367 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 11.40000000000000000 ) ) ; +#3368 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 55.40000000000001300 ) ) ; +#3369 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 26.06666666666666600 ) ) ; +#3370 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 55.73333333333329900 ) ) ; +#3371 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 29.23333333333333400 ) ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 14.90000000000000000 ) ) ; +#3373 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 59.73333333333333400 ) ) ; +#3374 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 18.89999999999999900 ) ) ; +#3375 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 22.39999999999999900 ) ) ; +#3376 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 46.39999999999999100 ) ) ; +#3377 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 40.56666666666667000 ) ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 29.06666666666667400 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 60.89999999999999900 ) ) ; +#3380 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 13.56666666666667500 ) ) ; +#3381 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 57.56666666666667700 ) ) ; +#3382 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 23.90000000000000200 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 57.89999999999999100 ) ) ; +#3384 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 39.23333333333332700 ) ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 31.39999999999999500 ) ) ; +#3386 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 29.23333333333333400 ) ) ; +#3387 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 17.06666666666667400 ) ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 61.89999999999999900 ) ) ; +#3389 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 24.56666666666666600 ) ) ; +#3390 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 48.56666666666665600 ) ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 42.73333333333333400 ) ) ; +#3392 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 31.23333333333333100 ) ) ; +#3393 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 63.06666666666667700 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 15.73333333333333600 ) ) ; +#3395 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3396 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 59.73333333333333400 ) ) ; +#3397 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 47.23333333333333400 ) ) ; +#3398 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 21.73333333333333400 ) ) ; +#3399 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 71.23333333333333400 ) ) ; +#3400 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 33.56666666666667000 ) ) ; +#3401 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 19.23333333333333100 ) ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 64.06666666666666300 ) ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 26.73333333333333100 ) ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 50.73333333333333400 ) ) ; +#3405 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 44.90000000000001300 ) ) ; +#3406 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 33.39999999999999900 ) ) ; +#3407 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 65.23333333333333400 ) ) ; +#3408 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 17.90000000000001300 ) ) ; +#3409 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 10.39999999999999300 ) ) ; +#3410 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 61.90000000000001300 ) ) ; +#3411 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 49.39999999999999900 ) ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 19.56666666666666600 ) ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 69.06666666666667700 ) ) ; +#3414 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 35.73333333333333400 ) ) ; +#3415 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 21.40000000000000200 ) ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 66.23333333333333400 ) ) ; +#3417 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 28.90000000000000600 ) ) ; +#3418 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 52.90000000000000600 ) ) ; +#3419 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 47.06666666666666300 ) ) ; +#3420 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 35.56666666666665600 ) ) ; +#3421 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 67.39999999999999100 ) ) ; +#3422 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 20.06666666666667700 ) ) ; +#3423 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 10.23333333333333400 ) ) ; +#3424 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 64.06666666666666300 ) ) ; +#3425 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 2, ( #4347, #1999, #658, #3013, #992, #3338, #1326, #3663, #1671, #3998, #2014, #4361, #2361, #335, #2701, #673, #3027, #1006, #3354, #1340, #3677, #1685, #4015, #2030, #9, #2374, #351, #2714, #686, #3042, #1019, #3367, #1354, #3691, #1698, #4028, #2045, #22, #2387, #365, #2727, #699, #3055, #1032, #3380, #1367, #3705, #1712, #4044, #2057, #34, #2400, #378, #2740, #711, #3067, #1045, #3394, #1380, #3718, #1725, #4060, #2069, #46, #2414, #391, #2753, #725, #3083, #1058, #3408, #1397, #3732, #1740, #4075, #2082, #61, #2428, #406, #2767, #739, #3096, #1073, #3422, #1412, #3748, #1758, #4092, #2100, #78, #2445, #422, #2784, #754, #3111, #1089, #3438, #1426, #3762, #1774, #4108, #2114, #93, #2461, #437, #2797, #770, #3126, #1103, #3452, #1441, #3778, #1789, #4127, #2129, #107, #2476, #450, #2812, #784, #3142, #1119, #3468, #1458, #3797, #1807, #4144, #2150, #123, #2494, #467, #2828, #800, #3158, #1137, #3483, #1474, #3812, #1821, #4160, #2164, #139, #2510, #480, #2842, #816, #3173, #1152, #3498, #1488, #3826, #1835, #4177, #2177, #151, #2523, #492, #2855, #829, #3185, #1164, #3511, #1503, #3838, #1846, #4191, #2191, #163, #2536, #505, #2867, #841, #3197, #1176, #3522, #1514, #3851, #1857, #4201, #2203, #175, #2547, #518, #2881, #854, #3209, #1191, #3534, #1527, #3862, #1871, #4216, #2217, #189, #2560, #534, #2895, #868, #3222, #1204, #3547, #1541, #3877, #1886, #4234, #2231, #203, #2575, #548, #1935, #4283, #2283, #253, #2622, #597, #2953, #929, #3279, #1265, #3603, #1604, #3937, #1951, #4299, #2299, #269, #2639, #611, #2968, #944, #3294, #1278, #3617, #1619, #3951, #1965, #4314, #2315, #286, #2654, #627, #2985, #960, #3309, #1295, #3632, #1638, #3966, #1985, #4330, #2333, #308, #2672, #644, #3000, #978, #3324, #1312, #3649, #1654, #3982, #2000, #4348, #2347, #322, #2688, #659, #3014, #993, #3339, #1327, #3664, #1672, #4000, #2015, #4362, #2362, #336, #2702, #674, #3028, #1007, #3355, #1341, #3678, #1686, #4016, #2031, #10, #2375, #352, #2715, #687, #3043, #1020, #3368, #1355, #3692, #1699, #4029, #2046, #23, #2388, #366, #2728, #700, #3056, #1033, #3381, #1368, #3706, #1713, #4045, #2058, #35, #2401, #380, #2742, #713, #3069, #1047, #3396, #1382, #3720, #1727, #4063, #2070, #48, #2416, #393, #2755, #726, #3084, #1059, #3410, #1399, #3733, #1742, #4077, #2084, #63, #2431, #408, #2769, #741, #3098, #1076, #3424, #1414, #3750, #1762, #4093, #2102, #80, #2448, #424, #2785, #757, #3113, #1091, #3440, #1428, #3765, #1776, #4111, #2117, #95, #2462, #438, #2799, #773, #3128, #1105, #3454, #1444, #3781, #1792, #4129, #2132, #3136, #1113, #3462, #1452, #3791, #1801, #4138, #2143, #117, #2488, #461, #2822, #794, #3152, #1129, #3477, #1468, #3806, #1815, #4153, #2158, #132, #2503, #475, #2837, #810, #3168, #1147, #3492, #1483, #3821, #1830, #4171, #2172, #146, #2518, #487, #2850, #824, #3180 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.02083333333333333900, 0.02314814814814814700, 0.02777777777777777600, 0.03240740740740740600, 0.03703703703703703500, 0.04166666666666667100, 0.04629629629629629400, 0.05092592592592593000, 0.05555555555555556600, 0.06018518518518518900, 0.06481481481481481100, 0.06944444444444444800, 0.07407407407407408400, 0.07870370370370372000, 0.08333333333333334300, 0.08796296296296297900, 0.09259259259259260100, 0.09722222222222223800, 0.1018518518518518600, 0.1064814814814815000, 0.1111111111111111200, 0.1157407407407407600, 0.1203703703703703800, 0.1250000000000000300, 0.1296296296296296500, 0.1342592592592593000, 0.1388888888888889200, 0.1435185185185185500, 0.1481481481481481700, 0.1527777777777778200, 0.1574074074074074400, 0.1620370370370370600, 0.1666666666666666900, 0.1712962962962963400, 0.1759259259259259600, 0.1805555555555555800, 0.1851851851851852000, 0.1898148148148148500, 0.1944444444444444800, 0.1990740740740741000, 0.2037037037037037200, 0.2083333333333333700, 0.2129629629629629900, 0.2175925925925926200, 0.2222222222222222400, 0.2268518518518519200, 0.2314814814814815400, 0.2361111111111111600, 0.2407407407407407800, 0.2453703703703704300, 0.2500000000000000600, 0.2546296296296297100, 0.2592592592592593000, 0.2638888888888889500, 0.2685185185185186000, 0.2731481481481482000, 0.2777777777777778500, 0.2824074074074074400, 0.2870370370370370900, 0.2916666666666667400, 0.2962962962962963400, 0.3009259259259259900, 0.3055555555555556400, 0.3101851851851852300, 0.3148148148148148800, 0.3194444444444444800, 0.3240740740740741300, 0.3287037037037037800, 0.3333333333333333700, 0.3379629629629630200, 0.3425925925925927300, 0.3472222222222223200, 0.3518518518518519700, 0.3564814814814815700, 0.3611111111111112200, 0.3657407407407408700, 0.3703703703703704600, 0.3750000000000001100, 0.3796296296296297600, 0.3842592592592593600, 0.3888888888888890100, 0.3935185185185186600, 0.3981481481481482500, 0.4027777777777779000, 0.4074074074074075000, 0.4120370370370371500, 0.4166666666666668000, 0.4212962962962963900, 0.4259259259259260400, 0.4305555555555556900, 0.4351851851851852900, 0.4398148148148149400, 0.4444444444444445300, 0.4490740740740741800, 0.4537037037037038300, 0.4583333333333334300, 0.4629629629629630800, 0.4675925925925927800, 0.4722222222222223200, 0.4768518518518520300, 0.4814814814814816200, 0.4861111111111111600, 0.4907407407407408700, 0.4953703703703704100, 0.5000000000000001100, 0.5046296296296298700, 0.5092592592592594100, 0.5138888888888890600, 0.5185185185185187100, 0.5231481481481482500, 0.5277777777777779000, 0.5324074074074075500, 0.5370370370370372000, 0.5416666666666667400, 0.5462962962962963900, 0.5509259259259260400, 0.5555555555555556900, 0.5601851851851853400, 0.5648148148148148800, 0.5694444444444445300, 0.5740740740740741800, 0.5787037037037038300, 0.5833333333333334800, 0.5879629629629630200, 0.5925925925925926700, 0.5972222222222224300, 0.6018518518518519700, 0.6064814814814817300, 0.6111111111111112700, 0.6157407407407409200, 0.6203703703703704600, 0.6250000000000002200, 0.6296296296296297600, 0.6342592592592595200, 0.6388888888888889500, 0.6435185185185187100, 0.6481481481481482500, 0.6527777777777780100, 0.6574074074074075500, 0.6620370370370373100, 0.6666666666666667400, 0.6712962962962965000, 0.6759259259259260400, 0.6805555555555558000, 0.6851851851851853400, 0.6898148148148149900, 0.6944444444444445300, 0.6990740740740744000, 0.7037037037037038300, 0.7083333333333334800, 0.7129629629629630200, 0.7175925925925928900, 0.7222222222222223200, 0.7268518518518519700, 0.7314814814814816200, 0.7361111111111113800, 0.7407407407407408100, 0.7453703703703705700, 0.7500000000000001100, 0.7546296296296298700, 0.7592592592592595200, 0.7638888888888890600, 0.7685185185185187100, 0.7731481481481483600, 0.7777777777777780100, 0.7824074074074075500, 0.7870370370370373100, 0.7916666666666668500, 0.7962962962962965000, 0.8009259259259260400, 0.8055555555555558000, 0.8101851851851853400, 0.8148148148148149900, 0.8194444444444445300, 0.8240740740740742900, 0.8287037037037038300, 0.8333333333333335900, 0.8379629629629630200, 0.8425925925925927800, 0.8472222222222223200, 0.8518518518518520800, 0.8564814814814816200, 0.8611111111111113800, 0.8657407407407408100, 0.8703703703703705700, 0.8750000000000001100, 0.8796296296296298700, 0.8842592592592594100, 0.8888888888888890600, 0.8935185185185186000, 0.8981481481481483600, 0.9027777777777779000, 0.9074074074074076600, 0.9120370370370372000, 0.9166666666666668500, 0.9212962962962963900, 0.9259259259259261500, 0.9305555555555558000, 0.9351851851851854500, 0.9398148148148149900, 0.9444444444444446400, 0.9490740740740742900, 0.9537037037037039400, 0.9583333333333335900, 0.9629629629629631300, 0.9675925925925927800, 0.9722222222222224300, 0.9768518518518520800, 0.9814814814814817300, 0.9861111111111113800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 0.9829629131445332100, 0.9829629131445332100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890656500, 1.000000000000000400 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3426 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 51.56666666666666300 ) ) ; +#3427 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 17.39999999999999500 ) ) ; +#3428 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 66.90000000000000600 ) ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 26.06666666666667000 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 37.90000000000000600 ) ) ; +#3431 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 29.06666666666665200 ) ) ; +#3432 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 23.56666666666666600 ) ) ; +#3433 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 31.06666666666667400 ) ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 55.06666666666667000 ) ) ; +#3435 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 49.23333333333332700 ) ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 37.73333333333333400 ) ) ; +#3437 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 69.56666666666666300 ) ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 22.23333333333334100 ) ) ; +#3439 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.000000000000000000, -10.00000000000000000 ) ) ; +#3440 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 66.23333333333334800 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 53.73333333333334800 ) ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 15.23333333333333400 ) ) ; +#3443 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 64.73333333333333400 ) ) ; +#3444 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 28.23333333333333100 ) ) ; +#3445 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 40.06666666666667700 ) ) ; +#3446 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 28.89999999999999900 ) ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 25.73333333333332000 ) ) ; +#3448 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 57.23333333333333400 ) ) ; +#3449 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 51.40000000000001300 ) ) ; +#3450 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 39.90000000000000600 ) ) ; +#3451 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 71.73333333333333400 ) ) ; +#3452 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 24.40000000000000600 ) ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 62.73333333333334800 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 68.40000000000003400 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 55.89999999999999900 ) ) ; +#3456 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 68.23333333333332000 ) ) ; +#3457 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 13.06666666666666500 ) ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 62.56666666666666300 ) ) ; +#3459 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 30.40000000000000200 ) ) ; +#3460 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 42.23333333333334100 ) ) ; +#3461 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 28.73333333333333400 ) ) ; +#3462 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 69.73333333333334800 ) ) ; +#3463 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 27.90000000000000200 ) ) ; +#3464 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 59.39999999999999900 ) ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 53.56666666666667000 ) ) ; +#3466 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 42.06666666666667000 ) ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 73.89999999999999100 ) ) ; +#3468 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 26.56666666666668800 ) ) ; +#3469 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 64.89999999999999100 ) ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 58.06666666666663400 ) ) ; +#3471 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 35.39999999999997000 ) ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 70.39999999999992000 ) ) ; +#3473 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 10.90000000000000000 ) ) ; +#3474 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 60.40000000000000600 ) ) ; +#3475 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 32.56666666666667000 ) ) ; +#3476 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 44.39999999999999900 ) ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 71.90000000000006300 ) ) ; +#3478 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 30.06666666666667000 ) ) ; +#3479 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 61.56666666666666300 ) ) ; +#3480 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 55.73333333333333400 ) ) ; +#3481 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 44.23333333333333400 ) ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 76.06666666666669100 ) ) ; +#3483 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 28.73333333333333800 ) ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 67.06666666666666300 ) ) ; +#3485 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 60.23333333333333400 ) ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 6.233333333333336100 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 72.56666666666666300 ) ) ; +#3488 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 8.733333333333330700 ) ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 58.23333333333334100 ) ) ; +#3490 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 34.73333333333335600 ) ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 46.56666666666666300 ) ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 74.06666666666670600 ) ) ; +#3493 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 63.73333333333332700 ) ) ; +#3494 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 57.89999999999999900 ) ) ; +#3495 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 46.39999999999999100 ) ) ; +#3496 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 78.23333333333333400 ) ) ; +#3497 = ORIENTED_EDGE ( 'NONE', *, *, #2266, .F. ) ; +#3498 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 30.90000000000000600 ) ) ; +#3499 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 69.23333333333332000 ) ) ; +#3500 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 62.39999999999995600 ) ) ; +#3501 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 8.400000000000003900 ) ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 74.73333333333333400 ) ) ; +#3503 = ORIENTED_EDGE ( 'NONE', *, *, #2036, .F. ) ; +#3504 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#3505 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 56.06666666666667700 ) ) ; +#3506 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 36.90000000000000600 ) ) ; +#3507 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 65.89999999999999100 ) ) ; +#3508 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 60.06666666666666300 ) ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 48.56666666666665600 ) ) ; +#3510 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 5.233333333333333400 ) ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 33.06666666666668400 ) ) ; +#3512 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 71.40000000000000600 ) ) ; +#3513 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 64.56666666666666300 ) ) ; +#3514 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 10.56666666666666600 ) ) ; +#3515 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 76.89999999999999100 ) ) ; +#3516 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 53.90000000000000600 ) ) ; +#3518 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 39.06666666666666300 ) ) ; +#3519 = CARTESIAN_POINT ( 'NONE', ( -8.415497683119742300, -1.018616747063514800, 75.89999999999997700 ) ) ; +#3520 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 68.06666666666667700 ) ) ; +#3521 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 50.73333333333335600 ) ) ; +#3522 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 35.23333333333337000 ) ) ; +#3523 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 73.56666666666666300 ) ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 66.73333333333334800 ) ) ; +#3525 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 12.73333333333333400 ) ) ; +#3526 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 79.06666666666664900 ) ) ; +#3527 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 4.900000000000000400 ) ) ; +#3528 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 61.23333333333333400 ) ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 51.73333333333332700 ) ) ; +#3530 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 41.23333333333333400 ) ) ; +#3531 = CARTESIAN_POINT ( 'NONE', ( -6.306909130470652200, -6.620772248048995200, 75.90000000000003400 ) ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 70.23333333333332000 ) ) ; +#3533 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 52.90000000000000600 ) ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 37.40000000000002700 ) ) ; +#3535 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 75.73333333333333400 ) ) ; +#3536 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 68.90000000000000600 ) ) ; +#3537 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 14.89999999999999900 ) ) ; +#3538 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 9.066666666666666400 ) ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 63.39999999999999900 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 49.56666666666666300 ) ) ; +#3541 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 43.39999999999999100 ) ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( -1.170293485641269000, -9.322085437449731100, 75.89999999999987800 ) ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 72.40000000000000600 ) ) ; +#3544 = AXIS2_PLACEMENT_3D ( 'NONE', #3292, #3645, #1650 ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 32.23333333333333400 ) ) ; +#3546 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 55.06666666666667000 ) ) ; +#3547 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 39.56666666666667700 ) ) ; +#3548 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 5.733333333333334300 ) ) ; +#3549 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 71.06666666666662000 ) ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 17.06666666666667000 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 11.23333333333333400 ) ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 65.56666666666666300 ) ) ; +#3553 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 47.39999999999999900 ) ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 45.56666666666667000 ) ) ; +#3555 = CARTESIAN_POINT ( 'NONE', ( 6.065689510373515800, -7.324610224603946000, 75.89999999999997700 ) ) ; +#3556 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 74.56666666666664900 ) ) ; +#3557 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 34.40000000000001300 ) ) ; +#3558 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 57.23333333333333400 ) ) ; +#3559 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 7.900000000000000400 ) ) ; +#3560 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 73.23333333333333400 ) ) ; +#3561 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 19.23333333333333400 ) ) ; +#3562 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 13.40000000000000200 ) ) ; +#3563 = CARTESIAN_POINT ( 'NONE', ( 12.33896267925306700, -2.000000000000000000, -10.00000000000000000 ) ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 67.73333333333334800 ) ) ; +#3565 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 45.23333333333333400 ) ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 9.387583575575101600, -1.072981993100961200, 75.90000000000002000 ) ) ; +#3567 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 76.73333333333333400 ) ) ; +#3568 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 36.56666666666666300 ) ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 59.39999999999999900 ) ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 10.06666666666667200 ) ) ; +#3571 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 40.56666666666667000 ) ) ; +#3572 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 75.40000000000002000 ) ) ; +#3573 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 21.40000000000000600 ) ) ; +#3574 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 15.56666666666666800 ) ) ; +#3575 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 69.90000000000000600 ) ) ; +#3577 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 43.06666666666667000 ) ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 6.600417234041619200, 6.313436355139693900, 75.90000000000003400 ) ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 9.733333333333336100 ) ) ; +#3580 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 38.73333333333329200 ) ) ; +#3581 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 61.56666666666667000 ) ) ; +#3582 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 12.23333333333333400 ) ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 42.73333333333332700 ) ) ; +#3584 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 5.400000000000000400 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 23.56666666666667400 ) ) ; +#3586 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 17.73333333333333400 ) ) ; +#3587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 72.06666666666669100 ) ) ; +#3589 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 40.90000000000000600 ) ) ; +#3590 = CARTESIAN_POINT ( 'NONE', ( 0.3422467308927137900, 8.275637974924052300, 75.90000000000002000 ) ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 11.90000000000000200 ) ) ; +#3592 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 40.90000000000000600 ) ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 63.73333333333332700 ) ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 14.39999999999999900 ) ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 44.90000000000000600 ) ) ; +#3596 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 16.23333333333333400 ) ) ; +#3597 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 7.566666666666668200 ) ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 31.56666666666666300 ) ) ; +#3599 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 25.73333333333333400 ) ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 19.90000000000000200 ) ) ; +#3601 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, 6.400000000000000400 ) ) ; +#3602 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 74.23333333333333400 ) ) ; +#3603 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 42.73333333333334100 ) ) ; +#3604 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 38.73333333333331300 ) ) ; +#3605 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 75.40000000000000600 ) ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 14.06666666666666800 ) ) ; +#3607 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 43.06666666666668400 ) ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 65.89999999999999100 ) ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 16.56666666666666600 ) ) ; +#3610 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 47.06666666666667000 ) ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 9.733333333333336100 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 33.73333333333334100 ) ) ; +#3613 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 27.89999999999999900 ) ) ; +#3614 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 22.06666666666667400 ) ) ; +#3615 = CARTESIAN_POINT ( 'NONE', ( -12.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3616 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 76.39999999999994900 ) ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, 0.0000000000000000000, 44.90000000000002000 ) ) ; +#3618 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 36.56666666666666300 ) ) ; +#3619 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 73.23333333333333400 ) ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 47.73333333333334100 ) ) ; +#3621 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 16.23333333333333400 ) ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 45.23333333333333400 ) ) ; +#3623 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 68.06666666666667700 ) ) ; +#3624 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 18.73333333333333400 ) ) ; +#3625 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 76.56666666666664900 ) ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 49.23333333333333400 ) ) ; +#3627 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 11.90000000000000200 ) ) ; +#3628 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 35.89999999999999900 ) ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 30.06666666666667000 ) ) ; +#3630 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#3631 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 78.56666666666667700 ) ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 47.06666666666667000 ) ) ; +#3633 = ORIENTED_EDGE ( 'NONE', *, *, #2349, .T. ) ; +#3634 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 34.39999999999999900 ) ) ; +#3635 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 49.90000000000000600 ) ) ; +#3636 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 18.39999999999999900 ) ) ; +#3637 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 47.39999999999999900 ) ) ; +#3638 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 70.23333333333332000 ) ) ; +#3639 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 20.90000000000000200 ) ) ; +#3640 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 78.73333333333333400 ) ) ; +#3641 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 51.39999999999997700 ) ) ; +#3642 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 14.06666666666666800 ) ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 38.06666666666667700 ) ) ; +#3644 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 32.23333333333332700 ) ) ; +#3645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 20.73333333333333800 ) ) ; +#3647 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 52.56666666666666300 ) ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#3649 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 49.23333333333334800 ) ) ; +#3650 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 32.23333333333333400 ) ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 52.06666666666668400 ) ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 49.56666666666666300 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 72.40000000000000600 ) ) ; +#3654 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 38.90000000000000600 ) ) ; +#3655 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 23.06666666666667000 ) ) ; +#3656 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 8.733333333333327200 ) ) ; +#3657 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 53.56666666666666300 ) ) ; +#3658 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 16.23333333333333100 ) ) ; +#3659 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 40.23333333333333400 ) ) ; +#3660 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 34.39999999999999900 ) ) ; +#3661 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 22.89999999999999900 ) ) ; +#3662 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 54.73333333333332700 ) ) ; +#3663 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 7.399999999999998600 ) ) ; +#3664 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 51.40000000000000600 ) ) ; +#3665 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 30.06666666666667000 ) ) ; +#3666 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 51.73333333333329900 ) ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 74.56666666666664900 ) ) ; +#3668 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 25.23333333333333400 ) ) ; +#3669 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 10.90000000000000000 ) ) ; +#3670 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 55.73333333333329900 ) ) ; +#3671 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 15.73333333333333600 ) ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 18.39999999999999900 ) ) ; +#3673 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 42.39999999999999900 ) ) ; +#3674 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 36.56666666666666300 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 25.06666666666667000 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 56.89999999999999100 ) ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 9.566666666666673500 ) ) ; +#3678 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 53.56666666666669100 ) ) ; +#3679 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 27.90000000000000200 ) ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 53.90000000000000600 ) ) ; +#3681 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 27.39999999999998400 ) ) ; +#3682 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 13.06666666666665900 ) ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 57.89999999999999100 ) ) ; +#3684 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 15.90000000000000000 ) ) ; +#3685 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 20.56666666666667000 ) ) ; +#3686 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 44.56666666666666300 ) ) ; +#3687 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 38.73333333333334100 ) ) ; +#3688 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 27.23333333333333400 ) ) ; +#3689 = ORIENTED_EDGE ( 'NONE', *, *, #2238, .F. ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 59.06666666666667000 ) ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 11.73333333333333600 ) ) ; +#3692 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 55.73333333333334800 ) ) ; +#3693 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 25.73333333333332700 ) ) ; +#3694 = ORIENTED_EDGE ( 'NONE', *, *, #1892, .F. ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 56.06666666666666300 ) ) ; +#3696 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 29.56666666666666600 ) ) ; +#3697 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 15.23333333333333400 ) ) ; +#3698 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 60.06666666666667000 ) ) ; +#3699 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 18.73333333333333400 ) ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 22.73333333333333400 ) ) ; +#3701 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 46.73333333333334100 ) ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 40.89999999999999900 ) ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 29.40000000000000200 ) ) ; +#3704 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 61.23333333333332700 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 13.90000000000000000 ) ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 57.90000000000000600 ) ) ; +#3707 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 23.56666666666666600 ) ) ; +#3708 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 58.23333333333334100 ) ) ; +#3709 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 31.73333333333333800 ) ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 25.73333333333332000 ) ) ; +#3711 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 17.39999999999999500 ) ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 62.23333333333333400 ) ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 24.90000000000000900 ) ) ; +#3714 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 48.89999999999999900 ) ) ; +#3715 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 43.06666666666667700 ) ) ; +#3716 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 31.56666666666666300 ) ) ; +#3717 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 63.39999999999999100 ) ) ; +#3718 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 16.06666666666666600 ) ) ; +#3719 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 10.06666666666667200 ) ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 60.06666666666666300 ) ) ; +#3721 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 47.56666666666667700 ) ) ; +#3722 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 21.40000000000000200 ) ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 70.90000000000000600 ) ) ; +#3724 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 33.89999999999999900 ) ) ; +#3725 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 19.56666666666666600 ) ) ; +#3726 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 64.39999999999997700 ) ) ; +#3727 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 27.06666666666666600 ) ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 51.06666666666667700 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 45.23333333333334100 ) ) ; +#3730 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 33.73333333333334800 ) ) ; +#3731 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 65.56666666666664900 ) ) ; +#3732 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 18.23333333333334800 ) ) ; +#3733 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 62.23333333333334800 ) ) ; +#3734 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2798, #1761, #755, #2429, #62, #94, #4110, #4076, #4061, #3799, #3780, #3764, #3749, #3719, #3423, #3409, #2768, #2754, #2741, #2478, #2447, #2415, #2131, #2115, #2101, #2083, #1791, #1726, #1460, #1443, #1427, #1398, #1381, #1121, #1090, #1075, #786, #740, #712, #423, #407, #392, #379, #109, #79, #47, #4009, #3671, #3684, #2007, #3596, #1692, #1679, #3272, #693, #680, #2695, #16, #4355, #4292, #4248, #4037, #4022, #3992, #3930, #3699, #3374, #3361, #3348, #3287, #3049, #3036, #3021, #2961, #2947, #2721, #2708, #2381, #2368, #2355, #2291, #2247, #2039, #2024, #1943, #1705, #1665, #1596, #1361, #1348, #1334, #1256, #1026, #1013, #1000, #936, #922, #667, #565, #359, #344, #329, #261, #220, #205, #3, #4137, #3710, #3104, #1749, #2487, #2455, #1097, #1082, #515, #430, #101, #69, #4120, #4101, #4083, #3790, #3771, #3756, #3740, #3461, #3446, #3431, #3386, #3120, #2878, #2806, #2791, #2775, #2392, #2141, #2123, #2469, #2437, #2108, #2091, #1800, #1782, #1768, #1717, #1451, #1435, #1420, #1372, #1112, #1037, #851, #763, #747, #444, #414, #116, #87, #4163, #3815, #3161, #3783, #1140, #454, #4131, #3471, #3146, #2845, #2816, #2513, #2481, #2450, #2134, #1824, #1794, #1477, #1123, #803, #788, #2087, #2017, #1730, #338, #3342, #291, #4275, #3654, #2640, #3384, #182, #2590, #564, #2920, #895, #3247, #1229, #3571, #1570, #3905, #1915, #4262, #2261, #234, #2602, #578, #2935, #907, #3259, #1242, #3583, #1583, #3917, #1929, #4277, #2276, #247, #2616, #591, #2946, #921, #3271, #1255, #3595, #1595, #3929, #1942, #4291, #2290, #260, #2631, #603, #2960, #935, #3286, #1272, #3610, #1611, #3944, #1958, #4306, #2307, #277, #2648, #619, #2977, #953, #3303, #1288, #3626, #1628, #3960, #1976, #4323, #2324, #300, #2664, #636, #2994, #970, #3318, #1304, #3641, #1646, #3973, #1992, #4340, #2340, #315, #2681, #651, #3007, #986, #3331, #1319, #3657, #1664, #3991, #2006, #4354, #2354, #328, #2694, #666, #3020, #999, #3347, #1333, #3670, #1678, #4008, #2023, #2, #2367, #343, #2707, #679, #3035, #1012, #3360, #1347, #3683, #1691, #4021, #2038, #15, #2380, #358, #2720, #692, #3048, #1025, #3373, #1360, #3698, #1704, #4036, #2051, #28, #2394, #372, #2734, #705, #3061, #1039, #3388, #1374, #3712, #1719, #4053, #2063, #40, #2408, #385, #2747, #719, #3076, #1052, #3402, #1390, #3726, #1734, #4069, #2076, #55, #2422, #400, #2761, #733, #3090, #1066, #3416, #1406, #3742, #1752, #4085, #2094, #71, #2439, #416, #2778, #3130, #1107, #3456, #1446, #3784, #1795, #4132, #2135, #111, #2482, #455, #2817, #789, #3147, #1124, #3472, #1462, #3801, #1810, #4147, #2153, #126, #2497, #470, #2832, #805, #3163, #1142, #3487, #1479, #3817, #1826, #4165, #2168, #143, #2515, #484, #2847, #820, #3177, #1156, #3502, #1493, #3830, #1839, #4183, #2181, #155, #2527, #496, #2859, #833, #3189, #1168, #3515, #1507, #3842, #1850, #4195, #2195, #167, #2540, #509, #2871, #845, #3201, #1180, #3526, #1518, #3855, #1861, #4206, #2207 ), + ( #179, #2551, #522, #2885, #858, #3213, #1195, #3538, #1531, #3866, #1875, #4221, #2221, #193, #2565, #538, #2899, #873, #3226, #1208, #3551, #1546, #3881, #1890, #4238, #2235, #208, #2579, #552, #2911, #886, #3238, #1220, #3562, #1560, #3896, #1904, #4251, #2250, #223, #2593, #568, #2923, #898, #3250, #1232, #3574, #1573, #3908, #1918, #4265, #2264, #237, #2605, #581, #2938, #910, #3262, #1245, #3586, #1586, #3920, #1932, #4280, #2279, #250, #2619, #594, #2950, #925, #3276, #1260, #3600, #1600, #3934, #1947, #4296, #2295, #265, #2635, #607, #2965, #940, #3291, #1276, #3614, #1615, #3948, #1962, #4310, #2311, #281, #2652, #623, #2982, #957, #3307, #1403, #3738, #1747, #4081, #2089, #67, #2435, #412, #2773, #745, #3102, #1080, #3429, #1418, #3754, #1766, #4099, #2106, #85, #2453, #428, #2789, #761, #3118, #1095, #3444, #1433, #3769, #1780, #4118, #2121, #99, #2467, #442, #2804, #777, #3133, #1110, #3459, #1449, #3788, #1798, #4135, #2139, #114, #2485, #459, #2820, #792, #3150, #1127, #3475, #1466, #3804, #1813, #4150, #2156, #130, #2501, #473, #2835, #808, #3166, #1145, #3490, #1482, #3820, #1829, #4170, #2171, #145, #2517, #486, #2849, #823, #3179, #1159, #3506, #1497, #3833, #1842, #4186, #2184, #158, #2531, #499, #2862, #836, #3192, #1171, #3518, #1510, #3845, #1853, #4197, #2198, #171, #2543, #513, #2876, #849, #3205, #1186, #3530, #1522, #3858, #1867, #4211, #2212, #185, #2556, #528, #2889, #863, #3217, #1199, #3541, #1536, #3871, #1880, #4227, #2225, #198, #2569, #543, #2903, #878, #3230, #1212, #3554, #1551, #3886, #1896, #4242, #2240, #213, #2583, #557, #2971, #947, #3297, #1282, #3620, #1622, #3954, #1970, #4317, #2318, #293, #2658, #630, #2988, #963, #3312, #1298, #3635, #1640, #3968, #1987, #4333, #2335, #310, #2675, #646, #3002, #981, #3326, #1314, #3651, #1658, #1309, #3647, #1652, #3980, #1998, #4346, #2346, #320, #2686, #657, #3012, #991, #3337, #1325, #3662, #1670, #3997, #2013, #4360, #2360, #334, #2700, #672, #3026, #1005, #3353, #1339, #3676, #1684, #4014, #2029, #8, #2373, #350, #2713, #685, #3041, #1018, #3366, #1353, #3690, #1697, #4027, #2044, #21, #2386, #364, #2726, #698, #3054, #1031, #3379, #1366, #3704, #1711, #4042, #2056, #33, #2399, #377, #2739, #710, #3066, #1044, #3393, #1379, #3717, #1724, #4059, #2068, #45, #2413, #390, #2752, #724, #3082, #1057, #3407, #1395, #3731, #1739, #4074, #2081, #60, #2427, #405, #2766, #738, #3095, #1072, #3421, #1411, #3747, #1757, #4091, #2099, #77, #2444, #421, #2783, #753, #3110, #1088, #3437, #1425, #3761, #1773, #4107, #2113, #92, #2460, #436, #2796, #769, #3125, #1102, #3451, #1440, #3776, #1788, #4125, #2128, #106, #2475, #449, #2811, #783, #3141, #1118, #3467, #1457, #3796, #1806, #4143, #2148, #122, #2493, #466, #2827, #799, #3157, #1135, #3482, #1473, #3811, #1820, #4158, #2163, #138, #2509, #479, #2841, #815, #3172, #1151, #3496, #1487, #3825, #1834, #4176, #2176, #150, #2522, #491, #2854, #828 ), + ( #3184, #1163, #3510, #1502, #2831, #804, #3162, #1141, #3486, #1478, #3816, #1825, #4164, #2167, #142, #2514, #483, #2846, #819, #3176, #1155, #3501, #1492, #3829, #1838, #4182, #2180, #154, #2526, #495, #2858, #832, #3188, #1167, #3514, #1506, #3841, #1849, #4194, #2194, #166, #2539, #508, #2870, #844, #3200, #1179, #3525, #1517, #3854, #1860, #4205, #2206, #178, #2550, #521, #2884, #857, #3212, #1194, #3537, #1530, #3865, #1874, #4220, #2220, #192, #2564, #537, #2898, #872, #3225, #1207, #3550, #1545, #3880, #1889, #4237, #2234, #207, #2578, #551, #2910, #885, #3237, #1219, #3561, #1559, #3895, #1903, #4250, #2249, #222, #2592, #567, #2922, #897, #3249, #1231, #3573, #1572, #3907, #1917, #4264, #2263, #236, #2604, #580, #2937, #909, #3261, #1244, #3585, #1585, #3919, #1931, #4279, #2278, #249, #2618, #593, #2949, #924, #3275, #1259, #3599, #1599, #3933, #1946, #4295, #2294, #264, #2634, #606, #2964, #939, #3290, #1275, #3613, #1614, #3947, #1961, #4309, #2310, #280, #2651, #622, #2981, #956, #3306, #1291, #3629, #1631, #3963, #1979, #4326, #2327, #303, #2668, #639, #2997, #973, #3321, #1307, #3644, #1649, #3976, #1995, #4343, #2344, #318, #2684, #654, #3010, #989, #3334, #1322, #3660, #1668, #3995, #2010, #4358, #2358, #332, #2698, #670, #3024, #1003, #3351, #1337, #3674, #1682, #4012, #2027, #6, #2371, #347, #2711, #683, #3039, #1016, #3364, #1351, #3687, #1695, #4025, #2042, #19, #2384, #362, #2724, #696, #3052, #1029, #3377, #1364, #3702, #1708, #4040, #2054, #31, #2397, #375, #2737, #708, #3064, #1042, #3391, #1377, #3715, #1722, #4057, #2066, #43, #2411, #388, #2750, #722, #3079, #1055, #3405, #1393, #3729, #1737, #4072, #2079, #58, #2425, #403, #2764, #736, #3093, #1069, #3419, #1409, #3745, #1755, #4088, #2097, #74, #2442, #419, #2781, #751, #3108, #1086, #3435, #1423, #3759, #1771, #4105, #2111, #90, #2458, #434, #2794, #767, #3123, #1100, #3449, #1438, #3774, #1786, #4123, #2126, #104, #2473, #447, #2809, #781, #3139, #1116, #3465, #1455, #3794, #1804, #4141, #2146, #120, #2491, #464, #2825, #797, #3155, #1133, #3480, #1471, #3809, #1818, #4156, #2161, #136, #2507, #477, #2839, #812, #3170, #1149, #3494, #1485, #3823, #1832, #4174, #2174, #148, #2520, #489, #2852, #826, #3182, #1161, #3508, #1500, #3836, #1844, #4189, #2188, #161, #2534, #503, #2865, #839, #3195, #1174, #771, #3127, #1104, #3453, #1442, #3779, #1790, #4128, #2130, #108, #2477, #451, #2813, #785, #3143, #1120, #3469, #1459, #3798, #1808, #4145, #2151, #124, #2495, #468, #2829, #801, #3159, #1138, #3484, #1475, #3813, #1822, #4161, #2165, #140, #2511, #481, #2843, #817, #3174, #1153, #3499, #1489, #3827, #1836, #4178, #2178, #152, #2524, #493, #2856, #830, #3186, #1165, #3512, #1504, #3839, #1847, #4192, #2192, #164, #2537, #506, #2868, #842, #3198, #1177, #3523, #1515, #3852, #1858, #4202, #2204, #176, #2548, #519, #2882, #855, #3210, #1192, #3535, #1528, #3863, #1872, #4217, #2218, #190, #2561 ), + ( #535, #2896, #869, #3223, #1205, #3548, #1542, #3878, #1887, #4235, #2232, #204, #2576, #549, #2908, #883, #3235, #1217, #3559, #1557, #3892, #1901, #4247, #2246, #219, #2589, #562, #2919, #894, #3246, #1228, #3570, #1569, #3904, #1914, #4261, #2260, #233, #2601, #577, #2934, #906, #3258, #1241, #3582, #1582, #3916, #1928, #4276, #2275, #246, #2615, #590, #2945, #920, #3270, #1254, #3594, #1594, #3928, #1941, #4290, #2289, #259, #2630, #602, #2959, #934, #3285, #1271, #3609, #1610, #3943, #1957, #4305, #2306, #275, #2646, #617, #2975, #951, #3301, #1286, #3624, #1626, #3958, #1974, #4321, #2322, #298, #2662, #634, #2992, #968, #3316, #1302, #3639, #1644, #3971, #1990, #4338, #2338, #313, #2678, #649, #3005, #984, #3329, #1317, #3655, #1662, #3988, #2004, #4352, #2352, #326, #2692, #664, #3018, #997, #3345, #1331, #3668, #1676, #4006, #2021, #4367, #2365, #340, #2705, #677, #3032, #1010, #3358, #1345, #3681, #1689, #4019, #2034, #13, #2378, #356, #2718, #690, #3046, #1023, #3371, #1358, #3696, #1702, #4033, #2049, #26, #2391, #369, #2732, #703, #3059, #1036, #3385, #1371, #3709, #1716, #4050, #2061, #38, #2405, #383, #2745, #717, #3073, #1050, #3400, #1387, #3724, #1732, #4067, #2074, #52, #2420, #398, #2759, #730, #3088, #1063, #3414, #1404, #3739, #1748, #4082, #2090, #68, #2436, #413, #2774, #746, #3103, #1081, #3430, #1419, #3755, #1767, #4100, #2107, #86, #2454, #429, #2790, #762, #3119, #1096, #3445, #1434, #3770, #1781, #4119, #2122, #100, #2468, #443, #2805, #778, #3134, #1111, #3460, #1450, #3789, #1799, #4136, #2140, #115, #2486, #460, #2821, #793, #3151, #1128, #3476, #1467, #3805, #1814, #4151, #2157, #131, #2502, #474, #2836, #809, #3167, #1146, #3491, #714, #3070, #1048, #3397, #1384, #3721, #1728, #4064, #2071, #49, #2417, #395, #2756, #727, #3085, #1060, #3411, #1400, #3735, #1744, #4078, #2085, #64, #2432, #409, #2770, #742, #3099, #1077, #3426, #1415, #3751, #1763, #4095, #2103, #81, #2449, #425, #2786, #758, #3115, #1092, #3441, #1429, #3766, #1777, #4112, #2118, #96, #2463, #439, #2801, #774, #3129, #1106, #3455, #1445, #3782, #1793, #4130, #2133, #110, #2480, #453, #2815, #787, #3145, #1122, #3470, #1461, #3800, #1809, #4146, #2152, #125, #2496, #469, #2830, #802, #3160, #1139, #3485, #1476, #3814, #1823, #4162, #2166, #141, #2512, #482, #2844, #818, #3175, #1154, #3500, #1491, #3828, #1837, #4181, #2179, #153, #2525, #494, #2857, #831, #3187, #1166, #3513, #1505, #3840, #1848, #4193, #2193, #165, #2538, #507, #2869, #843, #3199, #1178, #3524, #1516, #3853, #1859, #4204, #2205, #177, #2549, #520, #2883, #856, #3211, #1193, #3536, #1529, #3864, #1873, #4219, #2219, #191, #2563, #536, #2897, #871, #3224, #1206, #3549, #1544, #3879, #1888, #4236, #2233, #206, #2577, #550, #2909, #884, #3236, #1218, #3560, #1558, #3894, #1902, #4249, #2248, #221, #2591, #566, #2921, #896, #3248, #1230, #3572, #1571, #3906, #1916, #4263, #2262, #235, #2603, #579, #2936 ), + ( #908, #3260, #1243, #3584, #1584, #3918, #1930, #4278, #2277, #248, #2617, #592, #2948, #923, #3273, #1257, #3597, #1597, #3931, #1944, #4293, #2292, #262, #2632, #604, #2962, #937, #3288, #1273, #3611, #1612, #3945, #1959, #4307, #2308, #278, #2649, #620, #2979, #954, #3304, #1289, #3627, #1629, #3961, #1977, #4324, #2325, #301, #2666, #637, #2995, #971, #3319, #1305, #3642, #1647, #3974, #1993, #4341, #2342, #316, #2682, #652, #3008, #987, #3332, #1320, #3658, #1666, #3993, #2008, #4356, #2356, #330, #2696, #668, #3022, #1001, #3349, #1335, #3672, #1680, #4010, #2025, #4, #2369, #345, #2709, #681, #3037, #1014, #3362, #1349, #3685, #1693, #4023, #2040, #17, #2382, #360, #2722, #694, #3050, #1027, #3375, #1362, #3700, #1706, #4038, #2052, #29, #2395, #373, #2735, #706, #3062, #1040, #3389, #1375, #3713, #1720, #4055, #2064, #41, #2409, #386, #2748, #720, #3077, #1053, #3403, #1391, #3727, #1735, #4070, #2077, #56, #2423, #401, #2762, #734, #3091, #1067, #3417, #1407, #3743, #1753, #4086, #2095, #72, #2440, #417, #2779, #749, #3106, #1084, #3433, #3274, #1258, #3598, #1598, #3932, #1945, #4294, #2293, #263, #2633, #605, #2963, #938, #3289, #1274, #3612, #1613, #3946, #1960, #4308, #2309, #279, #2650, #621, #2980, #955, #3305, #1290, #3628, #1630, #3962, #1978, #4325, #2326, #302, #2667, #638, #2996, #972, #3320, #1306, #3643, #1648, #3975, #1994, #4342, #2343, #317, #2683, #653, #3009, #988, #3333, #1321, #3659, #1667, #3994, #2009, #4357, #2357, #331, #2697, #669, #3023, #1002, #3350, #1336, #3673, #1681, #4011, #2026, #5, #2370, #346, #2710, #682, #3038, #1015, #3363, #1350, #3686, #1694, #4024, #2041, #18, #2383, #361, #2723, #695, #3051, #1028, #3376, #1363, #3701, #1707, #4039, #2053, #30, #2396, #374, #2736, #707, #3063, #1041, #3390, #1376, #3714, #1721, #4056, #2065, #42, #2410, #387, #2749, #721, #3078, #1054, #3404, #1392, #3728, #1736, #4071, #2078, #57, #2424, #402, #2763, #735, #3092, #1068, #3418, #1408, #3744, #1754, #4087, #2096, #73, #2441, #418, #2780, #750, #3107, #1085, #3434, #1422, #3758, #1770, #4104, #2110, #89, #2457, #433, #2793, #766, #3122, #1099, #3448, #1437, #3773, #1785, #4122, #2125, #103, #2472, #446, #2808, #780, #3138, #1115, #3464, #1454, #3793, #1803, #4140, #2145, #119, #2490, #463, #2824, #796, #3154, #1132, #3479, #1470, #3808, #1817, #4155, #2160, #135, #2506, #476, #2838, #811, #3169, #1148, #3493, #1484, #3822, #1831, #4173, #2173, #147, #2519, #488, #2851, #825, #3181, #1160, #3507, #1499, #3835, #1843, #4188, #2187, #160, #2533, #502, #2864, #838, #3194, #1173, #3520, #1512, #3848, #1855, #4199, #2200, #173, #2545, #516, #2879, #852, #3207, #1189, #3532, #1524, #3860, #1869, #4214, #2214, #187, #2558, #530, #2891, #865, #3219, #1201, #3543, #1538, #3874, #1882, #4229, #2228, #200, #2571, #545, #2905, #880, #3232, #1214, #3556, #1554, #3889, #1898, #4244, #2243, #215, #2586, #559, #2916, #891, #3243, #1225, #3567, #1566 ), + ( #3901, #1911, #4257, #2257, #230, #2598, #574, #2931, #903, #3255, #1238, #3579, #1579, #3913, #1925, #4272, #2272, #243, #2612, #587, #2942, #917, #3267, #1251, #3591, #1591, #3925, #1938, #4287, #2286, #256, #2627, #599, #2956, #931, #3282, #1268, #3606, #1607, #3940, #1954, #4302, #2303, #272, #2643, #614, #2972, #948, #3298, #1283, #3621, #1623, #3955, #1971, #4318, #2319, #295, #2659, #631, #2989, #964, #3313, #1299, #3636, #1641, #1633, #3964, #1982, #4327, #2329, #305, #2670, #641, #2999, #975, #3323, #1308, #3646, #1651, #3979, #1997, #4345, #2345, #319, #2685, #655, #3011, #990, #3336, #1323, #3661, #1669, #3996, #2011, #4359, #2359, #333, #2699, #671, #3025, #1004, #3352, #1338, #3675, #1683, #4013, #2028, #7, #2372, #349, #2712, #684, #3040, #1017, #3365, #1352, #3688, #1696, #4026, #2043, #20, #2385, #363, #2725, #697, #3053, #1030, #3378, #1365, #3703, #1709, #4041, #2055, #32, #2398, #376, #2738, #709, #3065, #1043, #3392, #1378, #3716, #1723, #4058, #2067, #44, #2412, #389, #2751, #723, #3080, #1056, #3406, #1394, #3730, #1738, #4073, #2080, #59, #2426, #404, #2765, #737, #3094, #1071, #3420, #1410, #3746, #1756, #4090, #2098, #75, #2443, #420, #2782, #752, #3109, #1087, #3436, #1424, #3760, #1772, #4106, #2112, #91, #2459, #435, #2795, #768, #3124, #1101, #3450, #1439, #3775, #1787, #4124, #2127, #105, #2474, #448, #2810, #782, #3140, #1117, #3466, #1456, #3795, #1805, #4142, #2147, #121, #2492, #465, #2826, #798, #3156, #1134, #3481, #1472, #3810, #1819, #4157, #2162, #137, #2508, #478, #2840, #813, #3171, #1150, #3495, #1486, #3824, #1833, #4175, #2175, #149, #2521, #490, #2853, #827, #3183, #1162, #3509, #1501, #3837, #1845, #4190, #2189, #162, #2535, #504, #2866, #840, #3196, #1175, #3521, #1513, #3849, #1856, #4200, #2202, #174, #2546, #517, #2880, #853, #3208, #1190, #3533, #1526, #3861, #1870, #4215, #2216, #188, #2559, #533, #2894, #867, #3221, #1203, #3546, #1540, #3876, #1885, #4233, #2230, #202, #2574, #547, #2907, #882, #3234, #1216, #3558, #1556, #3891, #1900, #4246, #2245, #218, #2588, #561, #2918, #893, #3245, #1227, #3569, #1568, #3903, #1913, #4259, #2259, #232, #2600, #576, #2933, #905, #3257, #1240, #3581, #1581, #3915, #1927, #4274, #2274, #245, #2614, #589, #2944, #919, #3269, #1253, #3593, #1593, #3927, #1940, #4289, #2288, #258, #2629, #601, #2958, #933, #3284, #1270, #3608, #1609, #3942, #1956, #4304, #2305, #274, #2645, #616, #2974, #950, #3300, #1285, #3623, #1625, #3957, #1973, #4320, #2321, #297, #2661, #633, #2991, #966, #3315, #1301, #3638, #1643, #3970, #1989, #4336, #2337, #312, #2677, #648, #3004, #983, #3328, #1316, #3653, #1661, #3987, #2003, #4351, #2351, #325, #2691, #663, #3017, #996, #3344, #1330, #3667, #1675, #4005, #2020, #4365, #276, #2647, #618, #2976, #952, #3302, #1287, #3625, #1627, #3959, #1975, #4322, #2323, #299, #2663, #635, #2993, #969, #3317, #1303, #3640, #1645, #3972, #1991, #4339, #2339, #314, #2680 ), + ( #650, #3006, #985, #3330, #1318, #3656, #1663, #3989, #2005, #4353, #2353, #327, #2693, #665, #3019, #998, #3346, #1332, #3669, #1677, #4007, #2022, #1, #2366, #342, #2706, #678, #3034, #1011, #3359, #1346, #3682, #1690, #4020, #2037, #14, #2379, #357, #2719, #691, #3047, #1024, #3372, #1359, #3697, #1703, #4035, #2050, #27, #2393, #371, #2733, #704, #3060, #1038, #3387, #1373, #3711, #1718, #4052, #2062, #39, #2407, #384, #2746, #718, #3075, #1051, #3401, #1389, #3725, #1733, #4068, #2075, #54, #2421, #399, #2760, #732, #3089, #1065, #3415, #1405, #3741, #1750, #4084, #2093, #70, #2438, #415, #2777, #748, #3105, #1083, #3432, #1421, #3757, #1769, #4102, #2109, #88, #2456, #432, #2792, #765, #3121, #1098, #3447, #1436, #3772, #1784, #4121, #2124, #102, #2471, #445, #2807, #779, #3137, #1114, #3463, #1453, #3792, #1802, #4139, #2144, #118, #2489, #462, #2823, #795, #3153, #1131, #3478, #1469, #3807, #1816, #4154, #2159, #134, #2504, #531, #2893, #866, #3220, #1202, #3545, #1539, #3875, #1883, #4231, #2229, #201, #2572, #546, #2906, #881, #3233, #1215, #3557, #1555, #3890, #1899, #4245, #2244, #216, #2587, #560, #2917, #892, #3244, #1226, #3568, #1567, #3902, #1912, #4258, #2258, #231, #2599, #575, #2932, #904, #3256, #1239, #3580, #1580, #3914, #1926, #4273, #2273, #244, #2613, #588, #2943, #918, #3268, #1252, #3592, #1592, #3926, #1939, #4288, #2287, #257, #2628, #600, #2957, #932, #3283, #1269, #3607, #1608, #3941, #1955, #4303, #2304, #273, #2644, #615, #2973, #949, #3299, #1284, #3622, #1624, #3956, #1972, #4319, #2320, #296, #2660, #632, #2990, #965, #3314, #1300, #3637, #1642, #3969, #1988, #4334, #2336, #311, #2676, #647, #3003, #982, #3327, #1315, #3652, #1660, #3986, #2002, #4350, #2350, #324, #2690, #662, #3016, #995, #3343, #1329, #3666, #1674, #4004, #2019, #4364, #2364, #339, #2704, #676, #3031, #1009, #3357, #1344, #3680, #1688, #4018, #2033, #12, #2377, #355, #2717, #689, #3045, #1022, #3370, #1357, #3695, #1701, #4032, #2048, #25, #2390, #368, #2731, #702, #3058, #1035, #3383, #1370, #3708, #1715, #4048, #2060, #37, #2404, #382, #2744, #716, #3072, #2196, #169, #2541, #511, #2873, #847, #3203, #1182, #3528, #1519, #3856, #1863, #4207, #2209, #181, #2553, #524, #2887, #860, #3215, #1196, #3539, #1533, #3868, #1877, #4224, #2223, #195, #2567, #541, #2901, #875, #3228, #1209, #3552, #1547, #3883, #1893, #4239, #2236, #210, #2581, #554, #2913, #887, #3240, #1221, #3564, #1562, #3898, #1906, #4253, #2253, #225, #2595, #570, #2926, #899, #3252, #1234, #3576, #1575, #3910, #1921, #4267, #2267, #239, #2608, #583, #2939, #912, #3264, #1247, #3588, #1588, #3922, #1934, #4282, #2281, #252, #2620, #595, #2952, #927, #3278, #1262, #3602, #1602, #3936, #1950, #4298, #2298, #267, #2638, #609, #2967, #942, #3293, #1277, #3616, #1617, #3950, #1964, #4312, #2313, #284, #2653, #625, #2984, #959, #3308, #1293, #3631, #1635, #3965, #1983, #4329, #2331, #306, #2671, #642 ) ), + .UNSPECIFIED., .T., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 3, 4 ), + ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.0000000000000000000, 0.5000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.004629629629629629400, 0.009259259259259258700, 0.01388888888888888800, 0.01851851851851851700, 0.02314814814814814700, 0.02777777777777777600, 0.03240740740740740600, 0.03703703703703703500, 0.04166666666666666400, 0.04629629629629629400, 0.05092592592592592300, 0.05555555555555555200, 0.06018518518518518200, 0.06481481481481481100, 0.06944444444444444800, 0.07407407407407407000, 0.07870370370370370600, 0.08333333333333332900, 0.08796296296296296500, 0.09259259259259258700, 0.09722222222222222400, 0.1018518518518518500, 0.1064814814814814800, 0.1111111111111111000, 0.1157407407407407400, 0.1203703703703703600, 0.1250000000000000000, 0.1296296296296296200, 0.1342592592592592700, 0.1388888888888889000, 0.1435185185185185200, 0.1481481481481481400, 0.1527777777777777900, 0.1574074074074074100, 0.1620370370370370300, 0.1666666666666666600, 0.1712962962962963100, 0.1759259259259259300, 0.1805555555555555500, 0.1851851851851851700, 0.1898148148148148300, 0.1944444444444444500, 0.1990740740740740700, 0.2037037037037036900, 0.2083333333333333400, 0.2129629629629629700, 0.2175925925925925900, 0.2222222222222222100, 0.2268518518518518600, 0.2314814814814814800, 0.2361111111111111000, 0.2407407407407407300, 0.2453703703703703800, 0.2500000000000000000, 0.2546296296296296500, 0.2592592592592592400, 0.2638888888888889000, 0.2685185185185185500, 0.2731481481481481400, 0.2777777777777777900, 0.2824074074074073800, 0.2870370370370370300, 0.2916666666666666900, 0.2962962962962962800, 0.3009259259259259300, 0.3055555555555555800, 0.3101851851851851700, 0.3148148148148148300, 0.3194444444444444200, 0.3240740740740740700, 0.3287037037037037200, 0.3333333333333333100, 0.3379629629629629700, 0.3425925925925926200, 0.3472222222222222100, 0.3518518518518518600, 0.3564814814814814500, 0.3611111111111111000, 0.3657407407407407600, 0.3703703703703703500, 0.3750000000000000000, 0.3796296296296296500, 0.3842592592592592400, 0.3888888888888889000, 0.3935185185185185500, 0.3981481481481481400, 0.4027777777777777900, 0.4074074074074073800, 0.4120370370370370300, 0.4166666666666666900, 0.4212962962962962800, 0.4259259259259259300, 0.4305555555555555800, 0.4351851851851851700, 0.4398148148148148300, 0.4444444444444444200, 0.4490740740740740700, 0.4537037037037037200, 0.4583333333333333100, 0.4629629629629629700, 0.4675925925925926200, 0.4722222222222222100, 0.4768518518518518600, 0.4814814814814814500, 0.4861111111111111000, 0.4907407407407407600, 0.4953703703703703500, 0.5000000000000000000, 0.5046296296296296500, 0.5092592592592593000, 0.5138888888888888400, 0.5185185185185184900, 0.5231481481481481400, 0.5277777777777777900, 0.5324074074074074400, 0.5370370370370370900, 0.5416666666666666300, 0.5462962962962962800, 0.5509259259259259300, 0.5555555555555555800, 0.5601851851851852300, 0.5648148148148147700, 0.5694444444444444200, 0.5740740740740740700, 0.5787037037037037200, 0.5833333333333333700, 0.5879629629629629100, 0.5925925925925925600, 0.5972222222222222100, 0.6018518518518518600, 0.6064814814814815100, 0.6111111111111111600, 0.6157407407407407000, 0.6203703703703703500, 0.6250000000000000000, 0.6296296296296296500, 0.6342592592592593000, 0.6388888888888888400, 0.6435185185185184900, 0.6481481481481481400, 0.6527777777777777900, 0.6574074074074074400, 0.6620370370370370900, 0.6666666666666666300, 0.6712962962962962800, 0.6759259259259259300, 0.6805555555555555800, 0.6851851851851852300, 0.6898148148148147700, 0.6944444444444444200, 0.6990740740740740700, 0.7037037037037037200, 0.7083333333333333700, 0.7129629629629629100, 0.7175925925925925600, 0.7222222222222222100, 0.7268518518518518600, 0.7314814814814815100, 0.7361111111111111600, 0.7407407407407407000, 0.7453703703703703500, 0.7500000000000000000, 0.7546296296296296500, 0.7592592592592593000, 0.7638888888888888400, 0.7685185185185184900, 0.7731481481481481400, 0.7777777777777777900, 0.7824074074074074400, 0.7870370370370370900, 0.7916666666666666300, 0.7962962962962962800, 0.8009259259259259300, 0.8055555555555555800, 0.8101851851851852300, 0.8148148148148147700, 0.8194444444444444200, 0.8240740740740740700, 0.8287037037037037200, 0.8333333333333333700, 0.8379629629629629100, 0.8425925925925925600, 0.8472222222222222100, 0.8518518518518518600, 0.8564814814814815100, 0.8611111111111111600, 0.8657407407407407000, 0.8703703703703703500, 0.8750000000000000000, 0.8796296296296296500, 0.8842592592592593000, 0.8888888888888888400, 0.8935185185185184900, 0.8981481481481481400, 0.9027777777777777900, 0.9074074074074074400, 0.9120370370370370900, 0.9166666666666666300, 0.9212962962962962800, 0.9259259259259259300, 0.9305555555555555800, 0.9351851851851852300, 0.9398148148148147700, 0.9444444444444444200, 0.9490740740740740700, 0.9537037037037037200, 0.9583333333333333700, 0.9629629629629629100, 0.9675925925925925600, 0.9722222222222222100, 0.9768518518518518600, 0.9814814814814815100, 0.9861111111111111600, 0.9907407407407407000, 0.9953703703703703500, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3735 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 49.73333333333334100 ) ) ; +#3736 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 19.23333333333333100 ) ) ; +#3737 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 68.73333333333332000 ) ) ; +#3738 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 24.23333333333333400 ) ) ; +#3739 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 36.06666666666666300 ) ) ; +#3740 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 28.56666666666666600 ) ) ; +#3741 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 21.73333333333333400 ) ) ; +#3742 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 66.56666666666666300 ) ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 29.23333333333333400 ) ) ; +#3744 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 53.23333333333333400 ) ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 47.39999999999999900 ) ) ; +#3746 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 35.89999999999999900 ) ) ; +#3747 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 67.73333333333334800 ) ) ; +#3748 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 20.40000000000000200 ) ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 9.900000000000000400 ) ) ; +#3750 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 64.40000000000000600 ) ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 51.89999999999999900 ) ) ; +#3752 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 17.06666666666666600 ) ) ; +#3753 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 66.56666666666666300 ) ) ; +#3754 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 26.39999999999999900 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 38.23333333333333400 ) ) ; +#3756 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 28.40000000000000200 ) ) ; +#3757 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 23.90000000000000200 ) ) ; +#3758 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 55.40000000000000600 ) ) ; +#3759 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 49.56666666666667000 ) ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 38.06666666666667700 ) ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 69.90000000000000600 ) ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 22.56666666666667700 ) ) ; +#3763 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #3984, #4240 ) ; +#3764 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 9.733333333333325400 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 66.56666666666669100 ) ) ; +#3766 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 54.06666666666667700 ) ) ; +#3767 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 14.90000000000000000 ) ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 64.39999999999999100 ) ) ; +#3769 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 28.56666666666667400 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 40.40000000000000600 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 28.23333333333333400 ) ) ; +#3772 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 26.06666666666665200 ) ) ; +#3773 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 57.56666666666666300 ) ) ; +#3774 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 51.73333333333332700 ) ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 40.23333333333332700 ) ) ; +#3776 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 72.06666666666666300 ) ) ; +#3777 = PRESENTATION_STYLE_ASSIGNMENT (( #640 ) ) ; +#3778 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 24.73333333333334100 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 63.06666666666667700 ) ) ; +#3780 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 9.566666666666668200 ) ) ; +#3781 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 68.73333333333334800 ) ) ; +#3782 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 56.23333333333333400 ) ) ; +#3783 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 34.73333333333332000 ) ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 68.56666666666666300 ) ) ; +#3785 = COLOUR_RGB ( '',0.7529411764705882200, 1.000000000000000000, 0.7529411764705882200 ) ; +#3786 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 12.73333333333333300 ) ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 62.23333333333333400 ) ) ; +#3788 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 30.73333333333334500 ) ) ; +#3789 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 42.56666666666667000 ) ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 28.06666666666666600 ) ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 70.06666666666669100 ) ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 28.23333333333333400 ) ) ; +#3793 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 59.73333333333332700 ) ) ; +#3794 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 53.89999999999999900 ) ) ; +#3795 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 42.39999999999999900 ) ) ; +#3796 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 74.23333333333333400 ) ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 26.90000000000001300 ) ) ; +#3798 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 65.23333333333332000 ) ) ; +#3799 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 9.400000000000003900 ) ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 58.39999999999997000 ) ) ; +#3801 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 70.73333333333324900 ) ) ; +#3802 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 10.56666666666666600 ) ) ; +#3803 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 60.06666666666667000 ) ) ; +#3804 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 32.89999999999999900 ) ) ; +#3805 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 44.73333333333332000 ) ) ; +#3806 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 72.23333333333339100 ) ) ; +#3807 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 30.40000000000000200 ) ) ; +#3808 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 61.89999999999999100 ) ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 56.06666666666667700 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 44.56666666666667700 ) ) ; +#3811 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 76.39999999999999100 ) ) ; +#3812 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 29.06666666666666300 ) ) ; +#3813 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 67.39999999999999100 ) ) ; +#3814 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 60.56666666666666300 ) ) ; +#3815 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 34.40000000000001300 ) ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 6.566666666666666400 ) ) ; +#3817 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 72.90000000000000600 ) ) ; +#3818 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 8.400000000000000400 ) ) ; +#3819 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 57.89999999999999100 ) ) ; +#3820 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 35.06666666666666300 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 74.40000000000003400 ) ) ; +#3822 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 64.06666666666666300 ) ) ; +#3823 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 58.23333333333332700 ) ) ; +#3824 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 46.73333333333334100 ) ) ; +#3825 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 78.56666666666667700 ) ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 31.23333333333334100 ) ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 69.56666666666666300 ) ) ; +#3828 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 62.73333333333333400 ) ) ; +#3829 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 8.733333333333334300 ) ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 75.06666666666669100 ) ) ; +#3831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 55.73333333333331300 ) ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 37.23333333333333400 ) ) ; +#3834 = CARTESIAN_POINT ( 'NONE', ( -9.500000000000001800, 0.0000000000000000000, 6.400000000000001200 ) ) ; +#3835 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 66.23333333333332000 ) ) ; +#3836 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 60.40000000000002000 ) ) ; +#3837 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 48.89999999999999900 ) ) ; +#3838 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 33.40000000000001300 ) ) ; +#3839 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 71.73333333333333400 ) ) ; +#3840 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 64.90000000000002000 ) ) ; +#3841 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 10.90000000000000000 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 77.23333333333333400 ) ) ; +#3843 = CARTESIAN_POINT ( 'NONE', ( -17.86150478919523700, 2.000000000000000000, -6.000000000000000000 ) ) ; +#3844 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 53.56666666666666300 ) ) ; +#3845 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 39.40000000000000600 ) ) ; +#3846 = CARTESIAN_POINT ( 'NONE', ( -8.436666165668928100, -1.706719949910271400, 75.90000000000002000 ) ) ; +#3847 = ORIENTED_EDGE ( 'NONE', *, *, #1949, .T. ) ; +#3848 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 68.40000000000000600 ) ) ; +#3849 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 51.06666666666666300 ) ) ; +#3850 = ORIENTED_EDGE ( 'NONE', *, *, #2201, .T. ) ; +#3851 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 35.56666666666669100 ) ) ; +#3852 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 73.89999999999999100 ) ) ; +#3853 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 67.06666666666666300 ) ) ; +#3854 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 13.06666666666666600 ) ) ; +#3855 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 79.40000000000002000 ) ) ; +#3856 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 61.56666666666667000 ) ) ; +#3857 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 51.39999999999998400 ) ) ; +#3858 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 41.56666666666667000 ) ) ; +#3859 = CARTESIAN_POINT ( 'NONE', ( -5.473097992002241300, -7.394108633791046400, 75.90000000000000600 ) ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 70.56666666666666300 ) ) ; +#3861 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 53.23333333333332700 ) ) ; +#3862 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 37.73333333333335600 ) ) ; +#3863 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 76.06666666666669100 ) ) ; +#3864 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 69.23333333333333400 ) ) ; +#3865 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 15.23333333333333600 ) ) ; +#3866 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 9.400000000000002100 ) ) ; +#3867 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -6.000000000000000000 ) ) ; +#3868 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 63.73333333333333400 ) ) ; +#3869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2254, #2237, #2314, #2210, #1984, #1922, #1864, #1907, #1894, #1576, #1653, #1548, #1618, #1311, #1603, #626, #1563, #1637, #1248, #1235, #1210, #1264, #596, #525, #268, #128, #943, #913, #900, #240, #226, #211, #2282, #2268, #1534, #1520, #1508, #1464, #1294, #1222, #1197, #1183, #977, #928, #888, #876, #861, #643, #610, #584 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4.907711222342467000E-034, 0.002712501518386721500, 0.003390626897983401900, 0.004068752277580081400, 0.005425003036773441400, 0.006781253795966803000, 0.008137504555160162900, 0.008815629934756841500, 0.009493755314353520200, 0.01085000607354688100, 0.01220625683274024000, 0.01356250759193359700, 0.01491875835112695600, 0.01559688373072363700, 0.01627500911032031500, 0.01763125986951367300, 0.01830938524911035500, 0.01898751062870703300, 0.01966563600830371200, 0.02034376138790038700, 0.02102188676749706200, 0.02136094945729540000, 0.02153048080219456900, 0.02161524647464415200, 0.02170001214709373800 ), + .UNSPECIFIED. ) ; +#3870 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 49.23333333333333400 ) ) ; +#3871 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 43.73333333333334100 ) ) ; +#3872 = VERTEX_POINT ( 'NONE', #3615 ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( 0.1936696690684465700, -9.427909231882477300, 75.90000000000000600 ) ) ; +#3874 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 72.73333333333333400 ) ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 32.56666666666667000 ) ) ; +#3876 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 55.40000000000000600 ) ) ; +#3877 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 39.89999999999999900 ) ) ; +#3878 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 6.066666666666662000 ) ) ; +#3879 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 71.40000000000000600 ) ) ; +#3880 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 17.40000000000000200 ) ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 11.56666666666666800 ) ) ; +#3882 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306700, -2.000000000000000000, -10.00000000000000000 ) ) ; +#3883 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 65.90000000000000600 ) ) ; +#3884 = VERTEX_POINT ( 'NONE', #3601 ) ; +#3885 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 47.06666666666666300 ) ) ; +#3886 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 45.89999999999999900 ) ) ; +#3887 = CARTESIAN_POINT ( 'NONE', ( 7.046261327948499800, -6.387793120449066100, 75.89999999999997700 ) ) ; +#3888 = SHAPE_DEFINITION_REPRESENTATION ( #1636, #2479 ) ; +#3889 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 74.89999999999999100 ) ) ; +#3890 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 34.73333333333332000 ) ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 57.56666666666666300 ) ) ; +#3892 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 8.233333333333334300 ) ) ; +#3893 = SURFACE_STYLE_FILL_AREA ( #304 ) ; +#3894 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 73.56666666666666300 ) ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 19.56666666666666600 ) ) ; +#3896 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 13.73333333333333800 ) ) ; +#3897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3898 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 68.06666666666666300 ) ) ; +#3899 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 44.90000000000000600 ) ) ; +#3900 = CARTESIAN_POINT ( 'NONE', ( 9.419439647546019100, -0.1688414781640110700, 75.90000000000002000 ) ) ; +#3901 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 7.900000000000000400 ) ) ; +#3902 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 36.90000000000000600 ) ) ; +#3903 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 59.73333333333332700 ) ) ; +#3904 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 10.39999999999999100 ) ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 40.90000000000000600 ) ) ; +#3906 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 75.73333333333332000 ) ) ; +#3907 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 21.73333333333333800 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 15.90000000000000000 ) ) ; +#3909 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.000000000000000000, -10.00000000000000000 ) ) ; +#3910 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 70.23333333333334800 ) ) ; +#3911 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 42.73333333333334100 ) ) ; +#3912 = CARTESIAN_POINT ( 'NONE', ( 5.909390106561620100, 6.898827573641221500, 75.90000000000002000 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 10.06666666666666600 ) ) ; +#3914 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 39.06666666666666300 ) ) ; +#3915 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 61.89999999999999100 ) ) ; +#3916 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 12.56666666666666600 ) ) ; +#3917 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 43.06666666666668400 ) ) ; +#3918 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 5.733333333333335200 ) ) ; +#3919 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 23.90000000000000200 ) ) ; +#3920 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 18.06666666666666600 ) ) ; +#3921 = PLANE ( 'NONE', #1263 ) ; +#3922 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 72.40000000000000600 ) ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 40.56666666666667000 ) ) ; +#3924 = CARTESIAN_POINT ( 'NONE', ( 0.1338525553432886900, 8.177491315788421000, 75.90000000000077300 ) ) ; +#3925 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 12.23333333333333400 ) ) ; +#3926 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 41.23333333333332700 ) ) ; +#3927 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 64.06666666666666300 ) ) ; +#3928 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 14.73333333333332700 ) ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 45.23333333333333400 ) ) ; +#3930 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 18.56666666666667000 ) ) ; +#3931 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 7.900000000000000400 ) ) ; +#3932 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 31.89999999999999500 ) ) ; +#3933 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 26.06666666666667000 ) ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 20.23333333333333800 ) ) ; +#3935 = CARTESIAN_POINT ( 'NONE', ( 14.51032205009283900, -2.000000000000000000, -6.000000000000000000 ) ) ; +#3936 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 74.56666666666666300 ) ) ; +#3937 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, 2.143593539448978000, 43.06666666666667000 ) ) ; +#3938 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 38.39999999999999100 ) ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 75.06666666666669100 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 14.40000000000000200 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 43.40000000000000600 ) ) ; +#3942 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 66.23333333333333400 ) ) ; +#3943 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 16.90000000000000200 ) ) ; +#3944 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 47.39999999999999900 ) ) ; +#3945 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 10.06666666666666600 ) ) ; +#3946 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 34.06666666666667000 ) ) ; +#3947 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 28.23333333333333100 ) ) ; +#3948 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 22.39999999999999900 ) ) ; +#3949 = SURFACE_SIDE_STYLE ('',( #1751 ) ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 76.73333333333327700 ) ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 45.23333333333334100 ) ) ; +#3952 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 36.23333333333333400 ) ) ; +#3953 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 72.90000000000000600 ) ) ; +#3954 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 48.06666666666666300 ) ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 16.56666666666666600 ) ) ; +#3956 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 45.56666666666667000 ) ) ; +#3957 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 68.40000000000000600 ) ) ; +#3958 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 19.06666666666665900 ) ) ; +#3959 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 76.89999999999999100 ) ) ; +#3960 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 49.56666666666666300 ) ) ; +#3961 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 12.23333333333333400 ) ) ; +#3962 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 36.23333333333333400 ) ) ; +#3963 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 30.40000000000000200 ) ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 18.89999999999999900 ) ) ; +#3965 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 78.89999999999999100 ) ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 47.40000000000000600 ) ) ; +#3967 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 34.06666666666666300 ) ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 50.23333333333333400 ) ) ; +#3969 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 47.73333333333333400 ) ) ; +#3970 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 70.56666666666666300 ) ) ; +#3971 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 21.23333333333333400 ) ) ; +#3972 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 79.06666666666669100 ) ) ; +#3973 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 51.73333333333329900 ) ) ; +#3974 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 14.40000000000000200 ) ) ; +#3975 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 38.39999999999999900 ) ) ; +#3976 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 32.56666666666667000 ) ) ; +#3977 = VECTOR ( 'NONE', #2297, 1000.000000000000000 ) ; +#3978 = PRODUCT_CONTEXT ( 'NONE', #2328, 'mechanical' ) ; +#3979 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 21.06666666666666600 ) ) ; +#3980 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 52.90000000000000600 ) ) ; +#3981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3982 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 49.56666666666669100 ) ) ; +#3983 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 31.89999999999999900 ) ) ; +#3984 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #1840, .NOT_KNOWN. ) ; +#3985 = LINE ( 'NONE', #3935, #4097 ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 49.89999999999999900 ) ) ; +#3987 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 72.73333333333333400 ) ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 23.40000000000000600 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 9.066666666666670000 ) ) ; +#3990 = PRESENTATION_STYLE_ASSIGNMENT (( #1963 ) ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 53.90000000000000600 ) ) ; +#3992 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 18.40000000000000600 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 16.56666666666666600 ) ) ; +#3994 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 40.56666666666667000 ) ) ; +#3995 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 34.73333333333334800 ) ) ; +#3996 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 23.23333333333333800 ) ) ; +#3997 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 55.06666666666667000 ) ) ; +#3998 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 7.733333333333331600 ) ) ; +#3999 = FACE_OUTER_BOUND ( 'NONE', #2300, .T. ) ; +#4000 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 51.73333333333334100 ) ) ; +#4001 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 29.73333333333333400 ) ) ; +#4002 = VECTOR ( 'NONE', #1574, 1000.000000000000000 ) ; +#4003 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .T. ) ; +#4004 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 52.06666666666662700 ) ) ; +#4005 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 74.90000000000000600 ) ) ; +#4006 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 25.56666666666666600 ) ) ; +#4007 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 11.23333333333333400 ) ) ; +#4008 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 56.06666666666666300 ) ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 15.56666666666666600 ) ) ; +#4010 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 18.73333333333333800 ) ) ; +#4011 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 42.73333333333333400 ) ) ; +#4012 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 36.90000000000000600 ) ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 25.40000000000000200 ) ) ; +#4014 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 57.23333333333333400 ) ) ; +#4015 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 9.900000000000000400 ) ) ; +#4016 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 53.90000000000003400 ) ) ; +#4017 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 27.56666666666666600 ) ) ; +#4018 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 54.23333333333332700 ) ) ; +#4019 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 27.73333333333332000 ) ) ; +#4020 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 13.40000000000000000 ) ) ; +#4021 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 58.23333333333334100 ) ) ; +#4022 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 18.23333333333333400 ) ) ; +#4023 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 20.90000000000000200 ) ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 44.90000000000001300 ) ) ; +#4025 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 39.06666666666666300 ) ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 27.56666666666666600 ) ) ; +#4027 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 59.39999999999999900 ) ) ; +#4028 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 12.06666666666666500 ) ) ; +#4029 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 56.06666666666669100 ) ) ; +#4030 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 25.39999999999999900 ) ) ; +#4031 = FACE_OUTER_BOUND ( 'NONE', #1233, .T. ) ; +#4032 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 56.40000000000002000 ) ) ; +#4033 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 29.89999999999999900 ) ) ; +#4034 = FACE_OUTER_BOUND ( 'NONE', #2242, .T. ) ; +#4035 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 15.56666666666666600 ) ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 60.40000000000000600 ) ) ; +#4037 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 18.06666666666666600 ) ) ; +#4038 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 23.06666666666667400 ) ) ; +#4039 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 47.06666666666666300 ) ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 41.23333333333333400 ) ) ; +#4041 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 29.73333333333333800 ) ) ; +#4042 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 61.56666666666667000 ) ) ; +#4043 = LINE ( 'NONE', #3909, #4002 ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 14.23333333333333600 ) ) ; +#4045 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -6.928203230275513200, 58.23333333333334800 ) ) ; +#4046 = FACE_OUTER_BOUND ( 'NONE', #2190, .T. ) ; +#4047 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 23.23333333333333400 ) ) ; +#4048 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 58.56666666666667000 ) ) ; +#4049 = LINE ( 'NONE', #2951, #3977 ) ; +#4050 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 32.06666666666667000 ) ) ; +#4051 = ORIENTED_EDGE ( 'NONE', *, *, #2036, .T. ) ; +#4052 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 17.73333333333332000 ) ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 62.56666666666666300 ) ) ; +#4054 = FACE_OUTER_BOUND ( 'NONE', #4337, .T. ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 25.23333333333332700 ) ) ; +#4056 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 49.23333333333332700 ) ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 43.39999999999999900 ) ) ; +#4058 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 31.89999999999999500 ) ) ; +#4059 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 63.73333333333332700 ) ) ; +#4060 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 16.40000000000000900 ) ) ; +#4061 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 9.233333333333334300 ) ) ; +#4063 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, 5.856406460551022000, 60.40000000000000600 ) ) ; +#4062 = FACE_BOUND ( 'NONE', #1657, .T. ) ; +#4064 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 47.89999999999999900 ) ) ; +#4065 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448979300, -8.000000000000000000, 21.06666666666665900 ) ) ; +#4066 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 70.56666666666666300 ) ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 34.23333333333333400 ) ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 19.90000000000000200 ) ) ; +#4069 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 64.73333333333333400 ) ) ; +#4070 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 27.40000000000000600 ) ) ; +#4071 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 51.40000000000001300 ) ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 45.56666666666666300 ) ) ; +#4073 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000400, 2.947441116742345500, 34.06666666666666300 ) ) ; +#4074 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 65.89999999999999100 ) ) ; +#4075 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 18.56666666666668100 ) ) ; +#4076 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 9.066666666666670000 ) ) ; +#4077 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275511400, -4.000000000000004400, 62.56666666666668400 ) ) ; +#4078 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 50.06666666666667000 ) ) ; +#4079 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 18.89999999999999900 ) ) ; +#4080 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 68.40000000000000600 ) ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 24.56666666666666600 ) ) ; +#4082 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 36.39999999999999900 ) ) ; +#4083 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 27.90000000000000200 ) ) ; +#4084 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 22.06666666666667000 ) ) ; +#4085 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 66.90000000000000600 ) ) ; +#4086 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 29.56666666666666600 ) ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 53.56666666666667000 ) ) ; +#4088 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 47.73333333333334100 ) ) ; +#4089 = VECTOR ( 'NONE', #2912, 1000.000000000000000 ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 36.23333333333333400 ) ) ; +#4091 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 68.06666666666667700 ) ) ; +#4092 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 20.73333333333333100 ) ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, 2.143593539448989100, 64.73333333333332000 ) ) ; +#4094 = CIRCLE ( 'NONE', #217, 12.50000000000000000 ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 52.23333333333333400 ) ) ; +#4096 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999998200, 16.73333333333334100 ) ) ; +#4097 = VECTOR ( 'NONE', #1948, 1000.000000000000000 ) ; +#4098 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 66.23333333333333400 ) ) ; +#4099 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 26.73333333333333100 ) ) ; +#4100 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 38.56666666666666300 ) ) ; +#4101 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 27.73333333333331700 ) ) ; +#4102 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 24.23333333333333100 ) ) ; +#4103 = VECTOR ( 'NONE', #539, 1000.000000000000000 ) ; +#4104 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 55.73333333333333400 ) ) ; +#4105 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 49.90000000000000600 ) ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 38.39999999999999900 ) ) ; +#4107 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 70.23333333333332000 ) ) ; +#4108 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 22.90000000000000200 ) ) ; +#4109 = CIRCLE ( 'NONE', #452, 12.50000000000000000 ) ; +#4110 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 8.900000000000002100 ) ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000003600, -9.797174393178833500E-016, 66.90000000000003400 ) ) ; +#4112 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 54.39999999999999100 ) ) ; +#4113 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 14.56666666666666600 ) ) ; +#4114 = LINE ( 'NONE', #3882, #4103 ) ; +#4115 = ORIENTED_EDGE ( 'NONE', *, *, #2012, .T. ) ; +#4116 = VECTOR ( 'NONE', #3214, 1000.000000000000000 ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 64.06666666666666300 ) ) ; +#4118 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 28.90000000000000600 ) ) ; +#4119 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 40.73333333333334800 ) ) ; +#4120 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 27.56666666666666600 ) ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 26.40000000000000600 ) ) ; +#4122 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 57.89999999999999900 ) ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 52.06666666666668400 ) ) ; +#4124 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 40.56666666666667000 ) ) ; +#4125 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 72.40000000000000600 ) ) ; +#4126 = ORIENTED_EDGE ( 'NONE', *, *, #1892, .T. ) ; +#4127 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 25.06666666666666600 ) ) ; +#4128 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 63.39999999999999100 ) ) ; +#4129 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000003600, -2.143593539448982500, 69.06666666666666300 ) ) ; +#4130 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 56.56666666666667000 ) ) ; +#4131 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 35.23333333333333400 ) ) ; +#4132 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 68.90000000000000600 ) ) ; +#4133 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551020200, -5.856406460551019300, 12.40000000000000400 ) ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 61.89999999999999900 ) ) ; +#4135 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 31.06666666666667400 ) ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 42.89999999999999900 ) ) ; +#4137 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 25.56666666666666600 ) ) ; +#4138 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551020200, -5.856406460551021100, 70.40000000000003400 ) ) ; +#4139 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 28.56666666666666600 ) ) ; +#4140 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 60.06666666666666300 ) ) ; +#4141 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 54.23333333333333400 ) ) ; +#4142 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 42.73333333333333400 ) ) ; +#4143 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 74.56666666666664900 ) ) ; +#4144 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275514100, 3.999999999999999100, 27.23333333333334800 ) ) ; +#4145 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 65.56666666666664900 ) ) ; +#4146 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 58.73333333333330600 ) ) ; +#4147 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 71.06666666666662000 ) ) ; +#4148 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 10.23333333333333400 ) ) ; +#4149 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 59.73333333333333400 ) ) ; +#4150 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 33.23333333333333400 ) ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 45.06666666666663400 ) ) ; +#4152 = LINE ( 'NONE', #3563, #4089 ) ; +#4153 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275510500, 4.000000000000005300, 72.56666666666672000 ) ) ; +#4154 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 30.73333333333331300 ) ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 62.23333333333333400 ) ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 56.40000000000000600 ) ) ; +#4157 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 44.90000000000000600 ) ) ; +#4158 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 76.73333333333333400 ) ) ; +#4159 = LINE ( 'NONE', #874, #4168 ) ; +#4160 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551021100, -5.856406460551020200, 29.39999999999999500 ) ) ; +#4161 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 67.73333333333334800 ) ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 60.90000000000001300 ) ) ; +#4163 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 34.23333333333333400 ) ) ; +#4164 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 6.900000000000000400 ) ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 73.23333333333333400 ) ) ; +#4166 = CIRCLE ( 'NONE', #370, 12.50000000000000000 ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, -2.143593539448981600, 8.066666666666668200 ) ) ; +#4168 = VECTOR ( 'NONE', #3227, 1000.000000000000000 ) ; +#4169 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 57.56666666666667000 ) ) ; +#4170 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 35.39999999999999900 ) ) ; +#4171 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, -2.143593539448984700, 74.73333333333337700 ) ) ; +#4172 = LINE ( 'NONE', #2566, #4116 ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 64.40000000000002000 ) ) ; +#4174 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 58.56666666666667000 ) ) ; +#4175 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742344200, 11.00000000000000400, 47.06666666666665600 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 78.90000000000002000 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000005300, 6.928203230275510500, 31.56666666666668100 ) ) ; +#4178 = CARTESIAN_POINT ( 'NONE', ( -3.061616997868383600E-016, -5.000000000000000900, 69.90000000000000600 ) ) ; +#4179 = CIRCLE ( 'NONE', #540, 12.50000000000000000 ) ; +#4180 = ORIENTED_EDGE ( 'NONE', *, *, #2201, .F. ) ; +#4181 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 63.06666666666666300 ) ) ; +#4182 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 9.066666666666666400 ) ) ; +#4183 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 75.40000000000002000 ) ) ; +#4184 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#4185 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551021100, 55.39999999999999100 ) ) ; +#4186 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922192800, -2.500000000000002200, 37.56666666666666300 ) ) ; +#4187 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 2.143593539448988200, 75.73333333333332000 ) ) ; +#4188 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 66.56666666666666300 ) ) ; +#4189 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 60.73333333333333400 ) ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 49.23333333333334100 ) ) ; +#4191 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448984200, -8.000000000000001800, 33.73333333333334100 ) ) ; +#4192 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155611400, 5.000000000000000900, 72.06666666666666300 ) ) ; +#4193 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 65.23333333333332000 ) ) ; +#4194 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 11.23333333333333400 ) ) ; +#4195 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 77.56666666666667700 ) ) ; +#4196 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 53.23333333333332700 ) ) ; +#4197 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.339745962155617600, 39.73333333333332700 ) ) ; +#4198 = CARTESIAN_POINT ( 'NONE', ( -8.377069973133416200, -2.386106227358758800, 75.90000000000002000 ) ) ; +#4199 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 68.73333333333332000 ) ) ; +#4200 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 51.40000000000001300 ) ) ; +#4201 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824700E-015, 8.000000000000003600, 35.90000000000002700 ) ) ; +#4202 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 74.23333333333333400 ) ) ; +#4203 = FACE_OUTER_BOUND ( 'NONE', #2623, .T. ) ; +#4204 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 67.40000000000000600 ) ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 13.39999999999999900 ) ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 79.73333333333336300 ) ) ; +#4207 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 61.89999999999999900 ) ) ; +#4208 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude3', #3030 ) ; +#4209 = CYLINDRICAL_SURFACE ( 'NONE', #756, 8.000000000000000000 ) ; +#4210 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 8.000000000000000000, 51.06666666666665600 ) ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -6.123233995736767300E-016, 41.89999999999999100 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( -4.927745773206040300, -7.808541848661684900, 75.90000000000002000 ) ) ; +#4213 = CIRCLE ( 'NONE', #821, 5.000000000000000000 ) ; +#4214 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 70.89999999999999100 ) ) ; +#4215 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628823000, -5.500000000000003600, 53.56666666666667000 ) ) ; +#4216 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448981600, -8.000000000000003600, 38.06666666666667700 ) ) ; +#4217 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 76.39999999999999100 ) ) ; +#4218 = FACE_OUTER_BOUND ( 'NONE', #1498, .T. ) ; +#4219 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 69.56666666666666300 ) ) ; +#4220 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 15.56666666666666800 ) ) ; +#4221 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 9.733333333333336100 ) ) ; +#4222 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4223 = CIRCLE ( 'NONE', #731, 5.000000000000000000 ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 64.06666666666666300 ) ) ; +#4225 = VECTOR ( 'NONE', #497, 1000.000000000000000 ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 48.89999999999999900 ) ) ; +#4227 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, -1.339745962155613800, 44.06666666666667000 ) ) ; +#4228 = CARTESIAN_POINT ( 'NONE', ( 1.548557358075001400, -9.330352313575780000, 75.89999999999999100 ) ) ; +#4229 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 73.06666666666666300 ) ) ; +#4230 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #1840 ) ) ; +#4231 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 32.89999999999999900 ) ) ; +#4232 = FACE_OUTER_BOUND ( 'NONE', #2296, .T. ) ; +#4233 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999800, 2.947441116742359800, 55.73333333333333400 ) ) ; +#4234 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999995600, 6.928203230275515900, 40.23333333333333400 ) ) ; +#4235 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 6.399999999999997700 ) ) ; +#4236 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 71.73333333333333400 ) ) ; +#4237 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155614700, -5.000000000000000900, 17.73333333333333400 ) ) ; +#4238 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 11.90000000000000200 ) ) ; +#4239 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 66.23333333333333400 ) ) ; +#4240 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #1996, 'design' ) ; +#4241 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 46.73333333333333400 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.499999999999999100, 46.23333333333333400 ) ) ; +#4243 = CARTESIAN_POINT ( 'NONE', ( 7.747824483118764100, -5.495511467272739200, 75.90000000000000600 ) ) ; +#4244 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 75.23333333333332000 ) ) ; +#4245 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 35.06666666666663400 ) ) ; +#4246 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -1.347111479062088800E-015, 57.89999999999999900 ) ) ; +#4247 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 8.566666666666666400 ) ) ; +#4248 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 17.89999999999999900 ) ) ; +#4249 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 73.89999999999999100 ) ) ; +#4250 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605149900E-016, 5.000000000000000900, 19.90000000000000200 ) ) ; +#4251 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 14.06666666666666800 ) ) ; +#4252 = PLANE ( 'NONE', #283 ) ; +#4253 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 68.40000000000000600 ) ) ; +#4254 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 44.56666666666667000 ) ) ; +#4255 = FACE_OUTER_BOUND ( 'NONE', #1543, .T. ) ; +#4256 = CARTESIAN_POINT ( 'NONE', ( 9.390370797823937500, 0.5151124953631048800, 75.90000000000002000 ) ) ; +#4257 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628824800, -5.499999999999998200, 8.233333333333334300 ) ) ; +#4258 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 37.23333333333333400 ) ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000400, -2.947441116742350000, 60.06666666666668400 ) ) ; +#4260 = VECTOR ( 'NONE', #4184, 1000.000000000000000 ) ; +#4261 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 10.73333333333333400 ) ) ; +#4262 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -6.928203230275509700, 41.23333333333332700 ) ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 8.000000000000001800, 76.06666666666663400 ) ) ; +#4264 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155613100, -5.000000000000000900, 22.06666666666667400 ) ) ; +#4265 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922195400, -2.500000000000000000, 16.23333333333333400 ) ) ; +#4266 = CIRCLE ( 'NONE', #958, 8.000000000000000000 ) ; +#4267 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.928203230275507000, 70.56666666666666300 ) ) ; +#4268 = LINE ( 'NONE', #156, #4225 ) ; +#4269 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551013100, 42.39999999999997700 ) ) ; +#4270 = CARTESIAN_POINT ( 'NONE', ( 4.757625256754836900, 7.617877509575130500, 75.89999999999997700 ) ) ; +#4271 = CYLINDRICAL_SURFACE ( 'NONE', #1184, 12.50000000000000000 ) ; +#4272 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 8.052558883257646000, 10.40000000000000400 ) ) ; +#4273 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 39.40000000000000600 ) ) ; +#4274 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.499999999999995600, 62.23333333333333400 ) ) ; +#4275 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 38.73333333333329200 ) ) ; +#4276 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 12.90000000000000200 ) ) ; +#4277 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551016700, 5.856406460551019300, 43.40000000000000600 ) ) ; +#4278 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 6.066666666666666400 ) ) ; +#4279 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, 4.330127018922195400, 24.23333333333333400 ) ) ; +#4280 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844388200, 3.660254037844385500, 18.39999999999999900 ) ) ; +#4281 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -6.000000000000000000 ) ) ; +#4282 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448983300, -7.999999999999999100, 72.73333333333333400 ) ) ; +#4283 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275513200, -4.000000000000000900, 41.23333333333334800 ) ) ; +#4284 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 40.23333333333332700 ) ) ; +#4285 = LINE ( 'NONE', #1157, #4260 ) ; +#4286 = CARTESIAN_POINT ( 'NONE', ( 0.04479172220770885600, 8.104212746860794100, 75.90000000000003400 ) ) ; +#4287 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000900, -9.526279441628824800, 12.56666666666666800 ) ) ; +#4288 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 41.56666666666667000 ) ) ; +#4289 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257651300, -8.052558883257649600, 64.40000000000002000 ) ) ; +#4290 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000001800, 2.143593539448976700, 15.06666666666666800 ) ) ; +#4291 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 45.56666666666667000 ) ) ; +#4292 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999999100, -2.143593539448983800, 17.73333333333332000 ) ) ; +#4293 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 8.233333333333334300 ) ) ; +#4294 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 32.23333333333332700 ) ) ; +#4295 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844387700, -3.660254037844387700, 26.39999999999999900 ) ) ; +#4296 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -4.330127018922195400, 20.56666666666667000 ) ) ; +#4297 = CARTESIAN_POINT ( 'NONE', ( -12.33896267925306500, -2.000000000000000000, -10.00000000000000000 ) ) ; +#4298 = CARTESIAN_POINT ( 'NONE', ( 1.469576158976824100E-015, 8.000000000000000000, 74.90000000000000600 ) ) ; +#4299 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551022900, 5.856406460551014000, 43.39999999999999900 ) ) ; +#4300 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 2.143593539448977100, 38.06666666666665600 ) ) ; +#4301 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999998200, 74.73333333333333400 ) ) ; +#4302 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742358000, 10.99999999999999800, 14.73333333333333400 ) ) ; +#4303 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 43.73333333333333400 ) ) ; +#4304 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000006200, 9.526279441628823000, 66.56666666666666300 ) ) ; +#4305 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275509700, -3.999999999999999100, 17.23333333333333400 ) ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999999100, 2.143593539448988200, 47.73333333333333400 ) ) ; +#4307 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 10.40000000000000200 ) ) ; +#4308 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 34.39999999999999900 ) ) ; +#4309 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922192800, 2.500000000000002700, 28.56666666666667400 ) ) ; +#4310 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155617600, 5.000000000000000900, 22.73333333333333400 ) ) ; +#4311 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#4312 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448978500, -8.000000000000001800, 77.06666666666662000 ) ) ; +#4313 = CIRCLE ( 'NONE', #1324, 8.000000000000000000 ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000002700, -6.928203230275512300, 45.56666666666667000 ) ) ; +#4315 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000000000, 0.0000000000000000000, 35.89999999999999900 ) ) ; +#4316 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 72.56666666666666300 ) ) ; +#4317 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844387700, -3.660254037844387700, 48.40000000000000600 ) ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( -6.735557395310444000E-016, -11.00000000000000000, 16.89999999999999500 ) ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 45.89999999999999900 ) ) ; +#4320 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742351800, -10.99999999999999800, 68.73333333333332000 ) ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551021100, 5.856406460551011300, 19.39999999999998100 ) ) ; +#4322 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999997300, -9.526279441628824800, 77.23333333333333400 ) ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -9.797174393178825700E-016, 49.89999999999999900 ) ) ; +#4324 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 12.56666666666666800 ) ) ; +#4325 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 36.56666666666666300 ) ) ; +#4326 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -1.339745962155615400, 30.73333333333334500 ) ) ; +#4327 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 19.23333333333333100 ) ) ; +#4328 = FACE_OUTER_BOUND ( 'NONE', #1130, .T. ) ; +#4329 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999994200, 6.928203230275512300, 79.23333333333333400 ) ) ; +#4330 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448988700, 8.000000000000001800, 47.73333333333333400 ) ) ; +#4331 = CYLINDRICAL_SURFACE ( 'NONE', #1431, 5.000000000000000000 ) ; +#4332 = CARTESIAN_POINT ( 'NONE', ( 7.999999999999998200, -2.143593539448983800, 33.73333333333333400 ) ) ; +#4333 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 4.330127018922192800, 50.56666666666667000 ) ) ; +#4334 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 48.06666666666664200 ) ) ; +#4335 = CIRCLE ( 'NONE', #1495, 12.50000000000000000 ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 2.020667218593131900E-015, 11.00000000000000000, 70.89999999999999100 ) ) ; +#4337 = EDGE_LOOP ( 'NONE', ( #814, #4126 ) ) ; +#4338 = CARTESIAN_POINT ( 'NONE', ( -4.000000000000000900, -6.928203230275508800, 21.56666666666666600 ) ) ; +#4339 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 8.052558883257651300, 79.39999999999999100 ) ) ; +#4340 = CARTESIAN_POINT ( 'NONE', ( -8.000000000000001800, -2.143593539448981600, 52.06666666666662700 ) ) ; +#4341 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 14.73333333333333400 ) ) ; +#4342 = CARTESIAN_POINT ( 'NONE', ( 10.99999999999999800, -2.947441116742352700, 38.73333333333334100 ) ) ; +#4343 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 32.89999999999999900 ) ) ; +#4344 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #1996 ) ; +#4345 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257649600, -8.052558883257651300, 21.40000000000000600 ) ) ; +#4346 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999100, -4.330127018922195400, 53.23333333333332700 ) ) ; +#4347 = CARTESIAN_POINT ( 'NONE', ( 5.656854249492442800, -5.656854249492441000, 6.400000000000001200 ) ) ; +#4348 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589416800E-016, -8.000000000000003600, 49.90000000000002000 ) ) ; +#4349 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275507000, 4.000000000000003600, 31.56666666666666600 ) ) ; +#4350 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 50.23333333333334800 ) ) ; +#4351 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742348700, -11.00000000000000400, 73.06666666666666300 ) ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 7.999999999999999100, 23.73333333333334100 ) ) ; +#4353 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551017500, -5.856406460551018400, 9.400000000000003900 ) ) ; +#4354 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275510500, 3.999999999999997300, 54.23333333333332700 ) ) ; +#4355 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275507900, -4.000000000000002700, 17.56666666666666600 ) ) ; +#4356 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 16.90000000000000200 ) ) ; +#4357 = CARTESIAN_POINT ( 'NONE', ( -11.00000000000000000, 0.0000000000000000000, 40.89999999999999900 ) ) ; +#4358 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.339745962155611400, 35.06666666666666300 ) ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628823000, 5.500000000000006200, 23.56666666666667400 ) ) ; +#4360 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844386900, 3.660254037844387700, 55.40000000000000600 ) ) ; +#4361 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 8.066666666666666400 ) ) ; +#4362 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448977100, 8.000000000000003600, 52.06666666666667000 ) ) ; +#4363 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551019300, -5.856406460551020200, 29.39999999999999100 ) ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551018400, -5.856406460551017500, 52.39999999999998400 ) ) ; +#4365 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999992000, 9.526279441628830100, 75.23333333333332000 ) ) ; +#4366 = FACE_OUTER_BOUND ( 'NONE', #2137, .T. ) ; +#4367 = CARTESIAN_POINT ( 'NONE', ( -4.898587196589412800E-016, -8.000000000000000000, 25.89999999999999900 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Plate.step b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Plate.step new file mode 100644 index 0000000..0ca2ddb --- /dev/null +++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Plate.step @@ -0,0 +1,96338 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('Trellais_Rear_Plate.step', + '2016-04-19T10:44:38', + ( 'WarFairy' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2015', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = AXIS2_PLACEMENT_3D ( 'NONE', #36390, #67422, #30199 ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 10.01621739760580500, 7.259459441370619700, -28.33110170628422600 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725669300, 12.16464174796073500, -28.53896444442197500 ) ) ; +#4 = CONICAL_SURFACE ( 'NONE', #26976, 10.50000000000009600, 0.7853981633974500600 ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #53220, .F. ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 58.62623792124937700, -28.70555803802997700 ) ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 70.33333333333331400, -10.73183747965883100 ) ) ; +#8 = ORIENTED_EDGE ( 'NONE', *, *, #79347, .F. ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11 = VERTEX_POINT ( 'NONE', #33032 ) ; +#12 = AXIS2_PLACEMENT_3D ( 'NONE', #15143, #58648, #21419 ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( -3.031778038947715800, 60.28233213024646600, -28.25051428653851800 ) ) ; +#14 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16 = EDGE_CURVE ( 'NONE', #67291, #20757, #70968, .T. ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506485600, 18.08087956867532500, -28.30223257055578800 ) ) ; +#18 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10126, #66164, #47612, #10398 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104972956600, 0.0007670610367944979800 ), + .UNSPECIFIED. ) ; +#19 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21 = CONICAL_SURFACE ( 'NONE', #49988, 10.00000000000009200, 0.7853981633974447300 ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.15857157145700800, -28.20555803802994200 ) ) ; +#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #13097, .F. ) ; +#26 = ORIENTED_EDGE ( 'NONE', *, *, #33896, .T. ) ; +#27 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 81.25489551879202600, -28.37193179497697000 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660918100, 61.46283204837310200, -28.48697406221710100 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 10.52620220503754400, -28.70555803802992800 ) ) ; +#32 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34838, #41068, #16333, #59856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0002670038068533373200 ), + .UNSPECIFIED. ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 65.79999999999999700, -28.20555803802997700 ) ) ; +#36 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37 = CONICAL_SURFACE ( 'NONE', #76319, 10.00000000000009200, 0.7853981633974447300 ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 15.99167745881034000, 55.80000000000008200, -28.49360982173998400 ) ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #67988, .F. ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 55.80000000000001800, -28.70555803802997700 ) ) ; +#41 = ORIENTED_EDGE ( 'NONE', *, *, #78615, .F. ) ; +#42 = EDGE_CURVE ( 'NONE', #25284, #44986, #33579, .T. ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495125000, 10.40771342879313500, -28.53891855579973600 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45 = CONICAL_SURFACE ( 'NONE', #550, 10.50000000000009600, 0.7853981633974500600 ) ; +#47 = EDGE_CURVE ( 'NONE', #2762, #7679, #2914, .T. ) ; +#46 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10412, #22917, #47904, #10675 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721021198900E-007, 0.001076779618376925300 ), + .UNSPECIFIED. ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 77.70389005397395000, -28.37519436813182900 ) ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #44345, .F. ) ; +#51 = ORIENTED_EDGE ( 'NONE', *, *, #55698, .T. ) ; +#50 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #56407, .T. ) ; +#53 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #20415, .T. ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#56 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58 = EDGE_CURVE ( 'NONE', #14661, #67834, #62293, .T. ) ; +#59 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4567, #79111, #53797, #48052 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524735141700E-007, 0.0007303749718165316500 ), + .UNSPECIFIED. ) ; +#60 = EDGE_CURVE ( 'NONE', #77757, #18178, #67175, .T. ) ; +#62 = EDGE_LOOP ( 'NONE', ( #14054, #55446, #69964, #26386 ) ) ; +#61 = AXIS2_PLACEMENT_3D ( 'NONE', #63915, #39106, #1853 ) ; +#63 = CIRCLE ( 'NONE', #47342, 10.00000000000009400 ) ; +#64 = VERTEX_POINT ( 'NONE', #64607 ) ; +#65 = VERTEX_POINT ( 'NONE', #70559 ) ; +#66 = EDGE_CURVE ( 'NONE', #73286, #75742, #34070, .T. ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #32114, .F. ) ; +#68 = ADVANCED_FACE ( 'NONE', ( #17541 ), #8786, .T. ) ; +#69 = EDGE_LOOP ( 'NONE', ( #18027, #47270, #20077, #62579, #69659, #64571 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( -15.32687855104135500, 46.69460332487157900, -28.70130020486395100 ) ) ; +#71 = EDGE_LOOP ( 'NONE', ( #29184, #38768, #18871 ) ) ; +#72 = ADVANCED_FACE ( 'NONE', ( #19483 ), #79818, .F. ) ; +#73 = CONICAL_SURFACE ( 'NONE', #46686, 10.50000000000009600, 0.7853981633974500600 ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 39.00000000000000700, -1.205558038030005300 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856768900, 57.92318720225498700, -28.70555803803001300 ) ) ; +#76 = AXIS2_PLACEMENT_3D ( 'NONE', #23456, #66975, #29742 ) ; +#77 = EDGE_LOOP ( 'NONE', ( #49891, #74055, #70539, #58926, #65301 ) ) ; +#78 = EDGE_CURVE ( 'NONE', #18756, #43689, #39317, .T. ) ; +#79 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80 = EDGE_CURVE ( 'NONE', #36616, #55672, #15577, .T. ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#82 = EDGE_CURVE ( 'NONE', #29731, #27143, #53799, .T. ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 71.35277818615432500, -28.70555803802999500 ) ) ; +#84 = ADVANCED_FACE ( 'NONE', ( #65254 ), #30211, .T. ) ; +#85 = ORIENTED_EDGE ( 'NONE', *, *, #68721, .F. ) ; +#86 = AXIS2_PLACEMENT_3D ( 'NONE', #19009, #25304, #68798 ) ; +#87 = FACE_OUTER_BOUND ( 'NONE', #8774, .T. ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #6890, .F. ) ; +#88 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#91 = EDGE_CURVE ( 'NONE', #58539, #7519, #68264, .T. ) ; +#92 = AXIS2_PLACEMENT_3D ( 'NONE', #50087, #56369, #25116 ) ; +#93 = AXIS2_PLACEMENT_3D ( 'NONE', #55648, #68165, #30919 ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811585800, 18.20564881207722500, -28.41114655922353900 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#96 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19802, #57067, #32310, #75811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672981007500E-007, 0.0007670610367943059700 ), + .UNSPECIFIED. ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 10.33333333333335300, -6.705558038030005700 ) ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063249700, 28.50210619075100700, -28.25343951603328200 ) ) ; +#100 = PLANE ( 'NONE', #69552 ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #61826, .T. ) ; +#102 = ORIENTED_EDGE ( 'NONE', *, *, #66941, .T. ) ; +#103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528132700, 20.46868088498121800, -28.51286550264510200 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719558800, 63.65857157145693200, -28.37229765499328600 ) ) ; +#106 = VERTEX_POINT ( 'NONE', #9620 ) ; +#107 = AXIS2_PLACEMENT_3D ( 'NONE', #42483, #55003, #17768 ) ; +#108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#111 = FACE_OUTER_BOUND ( 'NONE', #6464, .T. ) ; +#112 = AXIS2_PLACEMENT_3D ( 'NONE', #78534, #41235, #3972 ) ; +#113 = ORIENTED_EDGE ( 'NONE', *, *, #48558, .T. ) ; +#114 = VERTEX_POINT ( 'NONE', #28163 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 44.83333333333333600, 3.794441961969996900 ) ) ; +#116 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223644200, 81.76592160028475600, -28.37510699173786900 ) ) ; +#119 = EDGE_CURVE ( 'NONE', #18855, #59578, #48637, .T. ) ; +#118 = EDGE_LOOP ( 'NONE', ( #8608, #49398, #7210 ) ) ; +#120 = CIRCLE ( 'NONE', #61001, 10.50000000000009600 ) ; +#121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#122 = VERTEX_POINT ( 'NONE', #15876 ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #4847, .T. ) ; +#124 = ORIENTED_EDGE ( 'NONE', *, *, #46043, .T. ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 85.79999999999998300, -28.70555803802997700 ) ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 3.552755559547342100, 91.89098624823341800, -28.70555803803001300 ) ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #36994, .T. ) ; +#128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.66749699759768400, -28.20555803802994200 ) ) ; +#130 = ORIENTED_EDGE ( 'NONE', *, *, #65548, .T. ) ; +#131 = ORIENTED_EDGE ( 'NONE', *, *, #36860, .T. ) ; +#133 = AXIS2_PLACEMENT_3D ( 'NONE', #9817, #53323, #16077 ) ; +#132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40784, #22048, #53303, #16051 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764793994307600E-007, 0.0009376791149930047700 ), + .UNSPECIFIED. ) ; +#134 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( -16.02235059838246700, 50.54999999999999700, -28.65316072681825300 ) ) ; +#136 = CIRCLE ( 'NONE', #52022, 10.50000000000009600 ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 43.65857157145691000, -28.20555803802997700 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609168300, 81.46283204837325800, -28.48697406221694800 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175100, 80.46048989987122000, -28.36889022317246800 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#142 = CONICAL_SURFACE ( 'NONE', #10339, 10.50000000000009400, 0.7853981633974500600 ) ; +#143 = AXIS2_PLACEMENT_3D ( 'NONE', #32804, #76323, #39038 ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #47118, .F. ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#146 = VERTEX_POINT ( 'NONE', #59403 ) ; +#147 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22402, #59674, #41155, #3881 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527016346500E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #2254, .T. ) ; +#150 = ORIENTED_EDGE ( 'NONE', *, *, #48227, .T. ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274714700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #36401, .T. ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252815100, 20.46868088498121800, -28.51286550264510200 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528154400, 9.968680884981225200, -28.51286550264508400 ) ) ; +#155 = CIRCLE ( 'NONE', #3937, 10.50000000000009600 ) ; +#156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965400, 20.44069092601378300, -28.35186440610856800 ) ) ; +#162 = ADVANCED_FACE ( 'NONE', ( #46683 ), #40896, .T. ) ; +#163 = EDGE_LOOP ( 'NONE', ( #4977, #46585, #48177 ) ) ; +#164 = EDGE_CURVE ( 'NONE', #66219, #9664, #50576, .T. ) ; +#165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#166 = CONICAL_SURFACE ( 'NONE', #37773, 10.00000000000009200, 0.7853981633974415100 ) ; +#167 = VERTEX_POINT ( 'NONE', #22409 ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 51.16666666666668600, -12.20555803803000000 ) ) ; +#169 = ORIENTED_EDGE ( 'NONE', *, *, #46557, .T. ) ; +#170 = EDGE_CURVE ( 'NONE', #62053, #31985, #1932, .T. ) ; +#171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#172 = ADVANCED_FACE ( 'NONE', ( #63290 ), #28266, .F. ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 16.33333333333334600, 3.124568980892187500 ) ) ; +#174 = EDGE_CURVE ( 'NONE', #9809, #74769, #59817, .T. ) ; +#175 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3063, #15336, #52843, #15607 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083035862000E-007, 0.0003101809493108535200 ), + .UNSPECIFIED. ) ; +#176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#178 = EDGE_CURVE ( 'NONE', #7266, #58909, #32212, .T. ) ; +#179 = EDGE_CURVE ( 'NONE', #71304, #78782, #24758, .T. ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 18.66666666666667100, -6.705558038030000400 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#182 = ORIENTED_EDGE ( 'NONE', *, *, #51344, .F. ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116069200, 18.20564881207736000, -28.41114655922334000 ) ) ; +#184 = ORIENTED_EDGE ( 'NONE', *, *, #30542, .T. ) ; +#185 = AXIS2_PLACEMENT_3D ( 'NONE', #47018, #9797, #53299 ) ; +#186 = EDGE_CURVE ( 'NONE', #74314, #57451, #34241, .T. ) ; +#187 = EDGE_CURVE ( 'NONE', #10656, #43614, #44706, .T. ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 20.67701665379220800, -28.20555803802994500 ) ) ; +#189 = EDGE_CURVE ( 'NONE', #22718, #3819, #3555, .T. ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 30.94069092601378700, -28.35186440610858600 ) ) ; +#191 = ADVANCED_FACE ( 'NONE', ( #32119 ), #79247, .T. ) ; +#192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45760, #52014, #14789, #58310 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003593416339759834700, 0.0005041857630963409800 ), + .UNSPECIFIED. ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650650200, 28.58087956867532900, -28.30223257055580500 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( -10.98574357684217500, 51.58004100757904100, -28.24987021275288500 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 41.46868088498121800, -28.51286550264512700 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#197 = FACE_OUTER_BOUND ( 'NONE', #72433, .T. ) ; +#198 = ORIENTED_EDGE ( 'NONE', *, *, #69110, .T. ) ; +#199 = CIRCLE ( 'NONE', #43572, 10.00000000000009200 ) ; +#200 = ORIENTED_EDGE ( 'NONE', *, *, #69034, .F. ) ; +#201 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #62619, #75122 ) ; +#202 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752689800, 82.08770193146232000, -28.47147304844861900 ) ) ; +#204 = FACE_OUTER_BOUND ( 'NONE', #62270, .T. ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #35033, .T. ) ; +#206 = VERTEX_POINT ( 'NONE', #72990 ) ; +#207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#208 = ORIENTED_EDGE ( 'NONE', *, *, #3264, .T. ) ; +#209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459551700, 62.51973550835661100, -28.70555803802997700 ) ) ; +#211 = AXIS2_PLACEMENT_3D ( 'NONE', #78019, #21996, #34522 ) ; +#212 = EDGE_LOOP ( 'NONE', ( #59081, #67135, #61980 ) ) ; +#213 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#214 = VERTEX_POINT ( 'NONE', #10979 ) ; +#215 = AXIS2_PLACEMENT_3D ( 'NONE', #5268, #48759, #11545 ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 9.487410011450775100, 70.12140959735965900, -28.55996453402253400 ) ) ; +#217 = AXIS2_PLACEMENT_3D ( 'NONE', #13239, #692, #25748 ) ; +#218 = CIRCLE ( 'NONE', #15009, 10.00000000000009200 ) ; +#219 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#221 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 76.76150692817330400, -28.68631150211663400 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 8.116254736416765400, 24.54999999999998600, -28.53994725305374700 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725300400, 24.23212903577620700, -28.37244029424743300 ) ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #26181, .F. ) ; +#224 = FACE_OUTER_BOUND ( 'NONE', #23311, .T. ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 22.16666666666667500, -3.349151577478988200 ) ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #28000, .F. ) ; +#227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#229 = EDGE_LOOP ( 'NONE', ( #40844, #27874, #9668, #66412 ) ) ; +#230 = EDGE_LOOP ( 'NONE', ( #11811, #60818, #37951 ) ) ; +#231 = ORIENTED_EDGE ( 'NONE', *, *, #54027, .T. ) ; +#232 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28180, #65445, #22159, #65690 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648281862618700E-007, 0.0004318378175225137900 ), + .UNSPECIFIED. ) ; +#233 = CONICAL_SURFACE ( 'NONE', #31972, 10.00000000000009600, 0.7853981633974482800 ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #32476, .T. ) ; +#235 = CIRCLE ( 'NONE', #68537, 10.50000000000009200 ) ; +#236 = AXIS2_PLACEMENT_3D ( 'NONE', #3777, #47279, #10054 ) ; +#237 = EDGE_CURVE ( 'NONE', #13616, #78759, #69875, .T. ) ; +#238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#240 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274715200, 24.54999999999997200, -28.20555803802994200 ) ) ; +#243 = FACE_OUTER_BOUND ( 'NONE', #42742, .T. ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #46476, .T. ) ; +#245 = EDGE_CURVE ( 'NONE', #7482, #36888, #55418, .T. ) ; +#246 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#247 = AXIS2_PLACEMENT_3D ( 'NONE', #33920, #77438, #40165 ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 61.68929190448861300, -28.20555803803030800 ) ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#250 = ADVANCED_FACE ( 'NONE', ( #61343 ), #42795, .T. ) ; +#251 = AXIS2_PLACEMENT_3D ( 'NONE', #70087, #63874, #45308 ) ; +#252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#253 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #68355, .F. ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#256 = ORIENTED_EDGE ( 'NONE', *, *, #24055, .F. ) ; +#257 = ADVANCED_FACE ( 'NONE', ( #75896 ), #9724, .F. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 65.83333333333332900, -6.205558038030004800 ) ) ; +#259 = AXIS2_PLACEMENT_3D ( 'NONE', #22812, #66331, #29116 ) ; +#260 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #40149, #58924, #34182 ), + ( #77689, #40427, #3145 ), + ( #46658, #9411, #52922 ), + ( #15683, #59193, #21942 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 7.600444286810883900, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9841454210460431900, 1.000000000000000000), + ( 1.000000000000000000, 0.9945865736236114700, 1.000000000000000000), + ( 1.000000000000000000, 1.000015496500359800, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 30.83333333333332900, -9.205558038030003900 ) ) ; +#263 = CIRCLE ( 'NONE', #44355, 10.50000000000022600 ) ; +#264 = ORIENTED_EDGE ( 'NONE', *, *, #54568, .F. ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 10.46446513619102300, 9.181517971446963200, -28.67456072961195100 ) ) ; +#266 = FACE_OUTER_BOUND ( 'NONE', #9172, .T. ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#269 = EDGE_CURVE ( 'NONE', #60011, #78538, #77857, .T. ) ; +#268 = ORIENTED_EDGE ( 'NONE', *, *, #55737, .F. ) ; +#270 = ADVANCED_FACE ( 'NONE', ( #963 ), #73521, .T. ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#272 = ADVANCED_FACE ( 'NONE', ( #13649 ), #24327, .T. ) ; +#273 = ORIENTED_EDGE ( 'NONE', *, *, #53097, .T. ) ; +#274 = FACE_OUTER_BOUND ( 'NONE', #58427, .T. ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 68.16666666666668600, 9.794441961969994300 ) ) ; +#276 = EDGE_LOOP ( 'NONE', ( #29857, #73937, #35671 ) ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #69314, .T. ) ; +#278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310462200, 39.10230989102910100, -28.61774594594333000 ) ) ; +#280 = VERTEX_POINT ( 'NONE', #80040 ) ; +#281 = CIRCLE ( 'NONE', #11336, 10.50000000000009800 ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.737967874686777500, -28.38801640354855500 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#284 = ADVANCED_FACE ( 'NONE', ( #40857 ), #72030, .T. ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 10.17701665379185300, -28.20555803802992800 ) ) ; +#286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#288 = ORIENTED_EDGE ( 'NONE', *, *, #74786, .T. ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#290 = EDGE_CURVE ( 'NONE', #38499, #11715, #7743, .T. ) ; +#291 = CIRCLE ( 'NONE', #23815, 10.00000000000009400 ) ; +#292 = EDGE_CURVE ( 'NONE', #11943, #43972, #40971, .T. ) ; +#293 = EDGE_LOOP ( 'NONE', ( #73202, #64625, #40756 ) ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( -3.031785615621594800, 71.31767869357334200, -28.25052235028431000 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701800, 23.61903418172678900, -28.69431509262337700 ) ) ; +#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#297 = ORIENTED_EDGE ( 'NONE', *, *, #36536, .F. ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #54269, .T. ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995707800, 13.11903418172686400, -28.69431509262337000 ) ) ; +#301 = VERTEX_POINT ( 'NONE', #80306 ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274715200, 24.54999999999997200, -28.20555803802994200 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#304 = CONICAL_SURFACE ( 'NONE', #27330, 10.00000000000009200, 0.7853981633974447300 ) ; +#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310703400, 70.10230989102889500, -28.61774594594300700 ) ) ; +#307 = AXIS2_PLACEMENT_3D ( 'NONE', #6303, #62347, #25075 ) ; +#308 = EDGE_CURVE ( 'NONE', #78459, #68070, #73974, .T. ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#310 = EDGE_CURVE ( 'NONE', #10560, #32213, #59363, .T. ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.36762008758047700, -28.26633708900884700 ) ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #25507, .T. ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.15857157145701000, -28.20555803802996700 ) ) ; +#315 = EDGE_CURVE ( 'NONE', #52657, #57615, #26532, .T. ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174770700, 61.43945992495534400, -28.34042301926882200 ) ) ; +#317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 86.13383585008107000, -28.37247596307125300 ) ) ; +#320 = EDGE_LOOP ( 'NONE', ( #46724, #27196, #71778, #35219, #60307, #14192 ) ) ; +#321 = FACE_OUTER_BOUND ( 'NONE', #45408, .T. ) ; +#322 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1747, #45246, #8004, #51501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401252100, 0.004682530427070979100 ), + .UNSPECIFIED. ) ; +#325 = AXIS2_PLACEMENT_3D ( 'NONE', #19707, #57493, #26253 ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 24.55000000000000100, -28.20555803802994200 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 55.79999999999999000, -28.20555803802997700 ) ) ; +#328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#330 = CIRCLE ( 'NONE', #76891, 10.00000000000009200 ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #77864, .F. ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 36.83333333333335000, 0.9380355014189731800 ) ) ; +#333 = AXIS2_PLACEMENT_3D ( 'NONE', #8448, #64537, #33495 ) ; +#334 = EDGE_CURVE ( 'NONE', #63100, #55345, #11696, .T. ) ; +#335 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .F. ) ; +#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 28.65930907398620100, -28.35186440610856500 ) ) ; +#338 = ORIENTED_EDGE ( 'NONE', *, *, #20938, .F. ) ; +#339 = ADVANCED_FACE ( 'NONE', ( #26301 ), #53508, .T. ) ; +#340 = FACE_OUTER_BOUND ( 'NONE', #293, .T. ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #43754, .F. ) ; +#342 = CIRCLE ( 'NONE', #79485, 9.500000000000097700 ) ; +#343 = ORIENTED_EDGE ( 'NONE', *, *, #61240, .F. ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528428000, 49.63131911501857700, -28.51286550264483200 ) ) ; +#345 = EDGE_CURVE ( 'NONE', #77015, #52802, #5824, .T. ) ; +#346 = FACE_OUTER_BOUND ( 'NONE', #67260, .T. ) ; +#347 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #71591, .NOT_KNOWN. ) ; +#348 = AXIS2_PLACEMENT_3D ( 'NONE', #44796, #7560, #51061 ) ; +#349 = ORIENTED_EDGE ( 'NONE', *, *, #31860, .F. ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #64423, .T. ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #23472, .T. ) ; +#352 = ADVANCED_FACE ( 'NONE', ( #22367 ), #3849, .T. ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109247000, 49.97143078992716200, -28.37063977681169600 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807183300, 84.80000000000002600, -28.70555803802997700 ) ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 8.166666666666680300, 1.741883078712356500 ) ) ; +#358 = CONICAL_SURFACE ( 'NONE', #60771, 10.50000000000009800, 0.7853981633974500600 ) ; +#359 = VERTEX_POINT ( 'NONE', #1066 ) ; +#360 = AXIS2_PLACEMENT_3D ( 'NONE', #32754, #38983, #70008 ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 59.97246552159072800, -28.38801640354892800 ) ) ; +#362 = CONICAL_SURFACE ( 'NONE', #71711, 10.00000000000009400, 0.7853981633974447300 ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #6967, .T. ) ; +#364 = ADVANCED_FACE ( 'NONE', ( #55445 ), #51510, .T. ) ; +#365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49079, #61915, #80658, #43374 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520680900, 0.004414519045340939800 ), + .UNSPECIFIED. ) ; +#366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#367 = ORIENTED_EDGE ( 'NONE', *, *, #65267, .F. ) ; +#368 = VERTEX_POINT ( 'NONE', #19857 ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#371 = PLANE ( 'NONE', #57783 ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #4239, .T. ) ; +#373 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41442, #47670, #22953, #66475 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487556039100, 0.001085359101287175800 ), + .UNSPECIFIED. ) ; +#374 = FACE_OUTER_BOUND ( 'NONE', #73157, .T. ) ; +#375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#376 = AXIS2_PLACEMENT_3D ( 'NONE', #58303, #45749, #70806 ) ; +#377 = ORIENTED_EDGE ( 'NONE', *, *, #3117, .F. ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#379 = ADVANCED_FACE ( 'NONE', ( #70038 ), #18469, .F. ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #14372, .F. ) ; +#380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71617, #34357, #9583, #53092 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736409166400E-007, 0.0009376786059872005800 ), + .UNSPECIFIED. ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #51507, .F. ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 53.42856308690586800, -28.36981695106783300 ) ) ; +#385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 42.66666666666667900, -5.535685056952199400 ) ) ; +#387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999990200, 53.99926474563203300, -28.70555803803001300 ) ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #6046, .T. ) ; +#390 = FACE_OUTER_BOUND ( 'NONE', #25390, .T. ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 11.23083069465684900, 70.65007990305395000, -28.43638873268742600 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985163900, 13.09761904761934700, -28.70555803802992800 ) ) ; +#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.60000000000000900, -18.70555803803001300 ) ) ; +#395 = ADVANCED_FACE ( 'NONE', ( #20423 ), #66169, .T. ) ; +#396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477733700, 51.21410430764721900, -28.27354076558355800 ) ) ; +#398 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36919, #43166, #74480, #37169 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438961565800E-007, 0.0007763347809200161000 ), + .UNSPECIFIED. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#400 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 81.43945992495501700, -28.34042301926918800 ) ) ; +#402 = FACE_OUTER_BOUND ( 'NONE', #31705, .T. ) ; +#403 = EDGE_CURVE ( 'NONE', #47370, #35911, #12065, .T. ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( -16.45968132316368900, 86.42850366851875800, -28.60315268788645300 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428100, 43.67681279774500800, -28.70555803802997700 ) ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #69312, .T. ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512255900, 71.99560977511676200, -28.70555803802997700 ) ) ; +#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#410 = EDGE_CURVE ( 'NONE', #58204, #46273, #78392, .T. ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#413 = EDGE_LOOP ( 'NONE', ( #8706, #23267, #11428 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 30.94069092601378300, -28.35186440610858600 ) ) ; +#414 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29977, #60956, #67207, #73461 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279243818224100E-007, 0.001119324643800052600 ), + .UNSPECIFIED. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#416 = EDGE_CURVE ( 'NONE', #71731, #56186, #63925, .T. ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #13898, .T. ) ; +#418 = AXIS2_PLACEMENT_3D ( 'NONE', #26968, #8422, #32923 ) ; +#419 = CONICAL_SURFACE ( 'NONE', #79965, 10.00000000000009400, 0.7853981633974447300 ) ; +#420 = ORIENTED_EDGE ( 'NONE', *, *, #46682, .T. ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 49.00000000000002100, 9.794441961969996100 ) ) ; +#422 = EDGE_LOOP ( 'NONE', ( #65884, #62284, #46782, #37988 ) ) ; +#423 = ORIENTED_EDGE ( 'NONE', *, *, #36472, .F. ) ; +#424 = CONICAL_SURFACE ( 'NONE', #8337, 10.50000000000009400, 0.7853981633974500600 ) ; +#425 = CONICAL_SURFACE ( 'NONE', #32497, 10.00000000000009200, 0.7853981633974447300 ) ; +#426 = VERTEX_POINT ( 'NONE', #76126 ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#428 = ORIENTED_EDGE ( 'NONE', *, *, #9196, .F. ) ; +#429 = ORIENTED_EDGE ( 'NONE', *, *, #25475, .F. ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 14.16666666666666600, -6.205558038030004800 ) ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#433 = EDGE_CURVE ( 'NONE', #31933, #29006, #1890, .T. ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655525700, 20.67701665379217200, -28.20555803802994500 ) ) ; +#435 = EDGE_CURVE ( 'NONE', #73931, #34228, #68097, .T. ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.60252595950258900, -28.26641963845861500 ) ) ; +#438 = FACE_OUTER_BOUND ( 'NONE', #47738, .T. ) ; +#437 = AXIS2_PLACEMENT_3D ( 'NONE', #1344, #32377, #38598 ) ; +#439 = ORIENTED_EDGE ( 'NONE', *, *, #17064, .T. ) ; +#440 = CONICAL_SURFACE ( 'NONE', #80524, 10.50000000000009600, 0.7853981633974500600 ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #4374, .T. ) ; +#442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 52.31032580521100100, -28.59353418718932400 ) ) ; +#444 = ORIENTED_EDGE ( 'NONE', *, *, #30958, .F. ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 16.50000000000000700, 6.847000845227641200 ) ) ; +#446 = ORIENTED_EDGE ( 'NONE', *, *, #64803, .F. ) ; +#447 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#448 = EDGE_LOOP ( 'NONE', ( #1150, #60254, #1193 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#450 = ORIENTED_EDGE ( 'NONE', *, *, #34658, .F. ) ; +#451 = EDGE_CURVE ( 'NONE', #8011, #9140, #36946, .T. ) ; +#452 = FACE_OUTER_BOUND ( 'NONE', #53118, .T. ) ; +#453 = AXIS2_PLACEMENT_3D ( 'NONE', #49166, #55699, #43186 ) ; +#454 = AXIS2_PLACEMENT_3D ( 'NONE', #16115, #59652, #22369 ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 3.757024425534573700, 80.16517473503392900, -28.29551658696708600 ) ) ; +#457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#459 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466626800, 40.76893971291461600, -28.57333386111660500 ) ) ; +#462 = VERTEX_POINT ( 'NONE', #63924 ) ; +#463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#464 = ORIENTED_EDGE ( 'NONE', *, *, #28257, .T. ) ; +#465 = ADVANCED_FACE ( 'NONE', ( #57405 ), #64232, .T. ) ; +#466 = CONICAL_SURFACE ( 'NONE', #73165, 10.50000000000009600, 0.7853981633974482800 ) ; +#467 = AXIS2_PLACEMENT_3D ( 'NONE', #50660, #38155, #7156 ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 20.46868088498122200, -28.51286550264510200 ) ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 54.37738371066727400, -28.70555803802997700 ) ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( -11.53374414036882600, 91.59999999999999400, -28.70555803802999500 ) ) ; +#472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#473 = ADVANCED_FACE ( 'NONE', ( #38870 ), #31128, .T. ) ; +#474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#475 = ADVANCED_FACE ( 'NONE', ( #80745 ), #51885, .T. ) ; +#476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999999999999996400, -28.70555803803001300 ) ) ; +#478 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53275, #41040, #47261, #10037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178127901200, 0.0006016798664344023400 ), + .UNSPECIFIED. ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285811200, 83.67681279774460300, -28.70555803803030800 ) ) ; +#480 = AXIS2_PLACEMENT_3D ( 'NONE', #78884, #41579, #4321 ) ; +#481 = PLANE ( 'NONE', #47660 ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 20.00000000000000400, -1.205558038030005300 ) ) ; +#483 = CIRCLE ( 'NONE', #16825, 10.50000000000003700 ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #67639, .T. ) ; +#485 = EDGE_LOOP ( 'NONE', ( #20147, #19036, #78107, #4413, #80082 ) ) ; +#486 = CIRCLE ( 'NONE', #62472, 9.500000000000101300 ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653734000, 81.39409401757595200, -28.39369363572389600 ) ) ; +#489 = AXIS2_PLACEMENT_3D ( 'NONE', #80303, #55538, #30814 ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 41.06914835874665900, -28.45573375118225800 ) ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462650700, 71.39409401757627900, -28.39369363572357900 ) ) ; +#493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24023, #61306, #30301, #73796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629357094682600E-007, 0.0007670609591624654500 ), + .UNSPECIFIED. ) ; +#494 = EDGE_LOOP ( 'NONE', ( #41054, #25129, #54238, #44290, #35160, #21683 ) ) ; +#495 = EDGE_CURVE ( 'NONE', #29231, #47683, #49552, .T. ) ; +#496 = VECTOR ( 'NONE', #63125, 1000.000000000000000 ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344057800, 17.92298334620733500, -28.20555803802993500 ) ) ; +#498 = FACE_OUTER_BOUND ( 'NONE', #67762, .T. ) ; +#499 = AXIS2_PLACEMENT_3D ( 'NONE', #16884, #35908, #23398 ) ; +#500 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .T. ) ; +#501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77848, #40570, #15834, #59355 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678003506200, 0.0007670610367939910100 ), + .UNSPECIFIED. ) ; +#503 = CIRCLE ( 'NONE', #33872, 10.00000000000009200 ) ; +#504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#505 = VERTEX_POINT ( 'NONE', #27198 ) ; +#506 = VERTEX_POINT ( 'NONE', #45626 ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#509 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19310, #56571, #62859, #25594 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.209464335180193500E-016, 0.002676326193402652500 ), + .UNSPECIFIED. ) ; +#510 = CIRCLE ( 'NONE', #9756, 10.00000000000009200 ) ; +#511 = CIRCLE ( 'NONE', #26811, 10.00000000000009400 ) ; +#512 = ORIENTED_EDGE ( 'NONE', *, *, #9343, .F. ) ; +#513 = EDGE_CURVE ( 'NONE', #48058, #45855, #49404, .T. ) ; +#514 = ORIENTED_EDGE ( 'NONE', *, *, #41774, .T. ) ; +#515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#516 = EDGE_LOOP ( 'NONE', ( #78632, #5264, #66039, #10849, #77265 ) ) ; +#517 = EDGE_CURVE ( 'NONE', #69853, #69272, #35005, .T. ) ; +#518 = ORIENTED_EDGE ( 'NONE', *, *, #5013, .F. ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 8.149568985909218800E-015, 23.13556610137279900, -28.54207364681940000 ) ) ; +#520 = VERTEX_POINT ( 'NONE', #2659 ) ; +#521 = FACE_OUTER_BOUND ( 'NONE', #59866, .T. ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 63.66666666666665700, 3.124568980892192800 ) ) ; +#523 = ORIENTED_EDGE ( 'NONE', *, *, #4255, .F. ) ; +#524 = ORIENTED_EDGE ( 'NONE', *, *, #40343, .F. ) ; +#525 = EDGE_CURVE ( 'NONE', #15551, #15453, #20533, .T. ) ; +#526 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 28.66666666666667900, 5.722645192245505700 ) ) ; +#527 = EDGE_CURVE ( 'NONE', #72453, #40818, #33051, .T. ) ; +#528 = ORIENTED_EDGE ( 'NONE', *, *, #1108, .F. ) ; +#529 = FACE_OUTER_BOUND ( 'NONE', #26027, .T. ) ; +#530 = AXIS2_PLACEMENT_3D ( 'NONE', #79817, #42527, #5280 ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819190700, 51.65075715145310700, -28.20555803802997700 ) ) ; +#532 = ORIENTED_EDGE ( 'NONE', *, *, #39857, .T. ) ; +#533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#535 = FACE_OUTER_BOUND ( 'NONE', #17509, .T. ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 66.00000000000000000, -12.20555803803000200 ) ) ; +#537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( -17.40887775794658100, 39.42043992774116400, -28.41154406527801900 ) ) ; +#539 = AXIS2_PLACEMENT_3D ( 'NONE', #50943, #63253, #19994 ) ; +#540 = EDGE_CURVE ( 'NONE', #26548, #57435, #35043, .T. ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#542 = EDGE_CURVE ( 'NONE', #38042, #70678, #16524, .T. ) ; +#543 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20856, #58105, #27116, #70603 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217708626563700E-007, 0.0008482615949371645300 ), + .UNSPECIFIED. ) ; +#544 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#545 = EDGE_CURVE ( 'NONE', #19495, #30160, #47617, .T. ) ; +#546 = ADVANCED_FACE ( 'NONE', ( #14563 ), #60326, .F. ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( -9.487278546916906300, 51.47860033657566000, -28.56001054660905300 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 33.87738371066727400, -28.70555803802996700 ) ) ; +#549 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#550 = AXIS2_PLACEMENT_3D ( 'NONE', #27603, #70819, #58582 ) ; +#551 = FACE_OUTER_BOUND ( 'NONE', #61229, .T. ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 30.93250300240228900, -28.20555803802996700 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812500, 79.60439022488336000, -28.70555803802997700 ) ) ; +#554 = FACE_OUTER_BOUND ( 'NONE', #7146, .T. ) ; +#555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428573000, 31.02858243452105200, -28.70555803802996700 ) ) ; +#558 = ORIENTED_EDGE ( 'NONE', *, *, #41031, .F. ) ; +#559 = EDGE_CURVE ( 'NONE', #30550, #17621, #76835, .T. ) ; +#561 = VERTEX_POINT ( 'NONE', #46178 ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432775300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#562 = ADVANCED_FACE ( 'NONE', ( #62261 ), #10667, .F. ) ; +#563 = FACE_OUTER_BOUND ( 'NONE', #16062, .T. ) ; +#564 = PLANE ( 'NONE', #43654 ) ; +#565 = AXIS2_PLACEMENT_3D ( 'NONE', #10831, #35591, #4569 ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939080900, 35.68533208989821000, -28.53910738522651900 ) ) ; +#567 = AXIS2_PLACEMENT_3D ( 'NONE', #24970, #43698, #37445 ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188354900, 20.39435118792235400, -28.41114655922298800 ) ) ; +#569 = ORIENTED_EDGE ( 'NONE', *, *, #66, .T. ) ; +#570 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000091500, 15.94142842854307000, -28.20555803802992800 ) ) ; +#574 = CONICAL_SURFACE ( 'NONE', #33808, 10.00000000000009600, 0.7853981633974482800 ) ; +#575 = CONICAL_SURFACE ( 'NONE', #39182, 10.50000000000009400, 0.7853981633974482800 ) ; +#576 = VERTEX_POINT ( 'NONE', #3472 ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999300, 41.35277818615431800, -28.70555803802999500 ) ) ; +#579 = FACE_OUTER_BOUND ( 'NONE', #31719, .T. ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 89.41684396980714700, -28.70555803802999500 ) ) ; +#581 = ORIENTED_EDGE ( 'NONE', *, *, #63409, .F. ) ; +#582 = ORIENTED_EDGE ( 'NONE', *, *, #41771, .T. ) ; +#583 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#585 = AXIS2_PLACEMENT_3D ( 'NONE', #21172, #64697, #27438 ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000010200, 9.418457393421036300, -28.68863412692833800 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034485600, 10.17701665379206900, -28.20555803803018300 ) ) ; +#588 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21187, #27452, #33673, #77195 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397475500, 0.001517194977238183500 ), + .UNSPECIFIED. ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894334500, 45.55000000000000400, -28.70555803802996700 ) ) ; +#590 = ADVANCED_FACE ( 'NONE', ( #29207 ), #78020, .T. ) ; +#591 = FACE_OUTER_BOUND ( 'NONE', #25054, .T. ) ; +#592 = FACE_OUTER_BOUND ( 'NONE', #63167, .T. ) ; +#593 = AXIS2_PLACEMENT_3D ( 'NONE', #39453, #2180, #45676 ) ; +#594 = ORIENTED_EDGE ( 'NONE', *, *, #44469, .T. ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #46785, .T. ) ; +#596 = ORIENTED_EDGE ( 'NONE', *, *, #65174, .T. ) ; +#597 = EDGE_LOOP ( 'NONE', ( #55883, #29670, #2043 ) ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906781500, 49.42963663972540900, -28.27338767626450900 ) ) ; +#599 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13058, #37762, #62827, #25570 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785963473700E-007, 0.0007677775503749615100 ), + .UNSPECIFIED. ) ; +#600 = ORIENTED_EDGE ( 'NONE', *, *, #34903, .T. ) ; +#601 = ORIENTED_EDGE ( 'NONE', *, *, #12468, .F. ) ; +#602 = FACE_OUTER_BOUND ( 'NONE', #72986, .T. ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 34.66666666666667100, -5.205558038030003100 ) ) ; +#604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#605 = FACE_OUTER_BOUND ( 'NONE', #25430, .T. ) ; +#606 = AXIS2_PLACEMENT_3D ( 'NONE', #19171, #62701, #25443 ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #44356, .T. ) ; +#608 = EDGE_LOOP ( 'NONE', ( #69364, #63261, #1674, #16622, #73355, #51626 ) ) ; +#609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#611 = ORIENTED_EDGE ( 'NONE', *, *, #76260, .T. ) ; +#612 = CIRCLE ( 'NONE', #1276, 9.500000000000099500 ) ; +#613 = AXIS2_PLACEMENT_3D ( 'NONE', #74345, #37037, #80574 ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( 11.11891772579868500, 71.10238820582941300, -28.32098513914505100 ) ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #8622, .T. ) ; +#616 = CONICAL_SURFACE ( 'NONE', #1639, 10.00000000000009600, 0.7853981633974482800 ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( 16.52200773130736200, 9.976935235925664000, -28.54785533207237000 ) ) ; +#618 = CIRCLE ( 'NONE', #74171, 10.00000000000009400 ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 9.769169305342940000, 70.94992009694559000, -28.43638873268714900 ) ) ; +#620 = ORIENTED_EDGE ( 'NONE', *, *, #6278, .F. ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263277600, 45.54999999999997600, -28.70555803802996700 ) ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.47246552159110400, -28.38801640354855500 ) ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180657900, 71.65075715145295000, -28.20555803803014100 ) ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 6.000000000000004400, -1.205558038030002800 ) ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823704200, 48.69543746431602900, -28.61277292027075300 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#627 = EDGE_CURVE ( 'NONE', #50530, #48264, #27226, .T. ) ; +#628 = FACE_OUTER_BOUND ( 'NONE', #23506, .T. ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #28587, .F. ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 10.77874659791492100, 39.16476742015635900, -28.30311934730016800 ) ) ; +#631 = EDGE_CURVE ( 'NONE', #13019, #69152, #6069, .T. ) ; +#632 = FACE_OUTER_BOUND ( 'NONE', #65593, .T. ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 17.11558853307916200, 5.768685241042615700, -27.76659306440414800 ) ) ; +#635 = EDGE_LOOP ( 'NONE', ( #19693, #50775, #12560, #50806 ) ) ; +#636 = ORIENTED_EDGE ( 'NONE', *, *, #62623, .T. ) ; +#637 = CONICAL_SURFACE ( 'NONE', #30103, 10.00000000000009400, 0.7853981633974447300 ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428587200, 61.52858243452104100, -28.70555803802997700 ) ) ; +#639 = EDGE_CURVE ( 'NONE', #55468, #49688, #72409, .T. ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #12254, .F. ) ; +#641 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64308, #26509, #76776, #39505 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446042058800E-007, 0.0002745498510224241000 ), + .UNSPECIFIED. ) ; +#642 = ADVANCED_FACE ( 'NONE', ( #45649 ), #25268, .T. ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#644 = EDGE_CURVE ( 'NONE', #66366, #59631, #57920, .T. ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999986200, 17.63176086632777000, -28.70555803803009500 ) ) ; +#646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#647 = FACE_OUTER_BOUND ( 'NONE', #44280, .T. ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#649 = CIRCLE ( 'NONE', #8907, 10.00000000000009400 ) ; +#650 = EDGE_CURVE ( 'NONE', #17159, #20378, #43434, .T. ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 40.50000000000000000, 2.454695999814385600 ) ) ; +#652 = ORIENTED_EDGE ( 'NONE', *, *, #11061, .T. ) ; +#653 = EDGE_CURVE ( 'NONE', #12646, #34422, #29050, .T. ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263277600, 45.54999999999997600, -28.70555803802996700 ) ) ; +#655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 19.80638811528232400, 101.2127762305644700, -21.51959371688808200 ) ) ; +#657 = ORIENTED_EDGE ( 'NONE', *, *, #7033, .T. ) ; +#658 = ADVANCED_FACE ( 'NONE', ( #43714 ), #4298, .T. ) ; +#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615369000, 80.79999999999998300, -28.55171188418376400 ) ) ; +#662 = AXIS2_PLACEMENT_3D ( 'NONE', #24633, #80660, #37116 ) ; +#663 = EDGE_CURVE ( 'NONE', #66852, #76876, #14544, .T. ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047600, 80.36203212531219700, -28.38801640354842300 ) ) ; +#665 = EDGE_CURVE ( 'NONE', #35712, #55080, #59, .T. ) ; +#666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#667 = EDGE_CURVE ( 'NONE', #67964, #66062, #78821, .T. ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372566100, 87.93535825203922200, -28.53896444442201000 ) ) ; +#669 = FACE_OUTER_BOUND ( 'NONE', #4657, .T. ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851508900, 34.09761904761905500, -28.70555803802995200 ) ) ; +#671 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#672 = ORIENTED_EDGE ( 'NONE', *, *, #74147, .T. ) ; +#673 = AXIS2_PLACEMENT_3D ( 'NONE', #8843, #52363, #15136 ) ; +#674 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#675 = ORIENTED_EDGE ( 'NONE', *, *, #54881, .T. ) ; +#676 = ADVANCED_FACE ( 'NONE', ( #41784 ), #39843, .T. ) ; +#677 = ADVANCED_FACE ( 'NONE', ( #58344 ), #6748, .T. ) ; +#678 = EDGE_LOOP ( 'NONE', ( #3488, #70466, #22738 ) ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #67631, .F. ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159371000, 40.40190441413938100, -28.70555803803001600 ) ) ; +#681 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66033, #59778, #41252, #3992 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866729266700E-007, 0.001076778502991507000 ), + .UNSPECIFIED. ) ; +#682 = EDGE_LOOP ( 'NONE', ( #73012, #44489, #42898 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 4.239894507327896600, 71.93585231025930700, -28.38420446581286800 ) ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 15.07025710783656100, 9.859485784326881900, -28.70457077705549100 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 29.84772751981643100, -28.70555803802999200 ) ) ; +#686 = FACE_OUTER_BOUND ( 'NONE', #71748, .T. ) ; +#687 = AXIS2_PLACEMENT_3D ( 'NONE', #62666, #31400, #12904 ) ; +#688 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#689 = AXIS2_PLACEMENT_3D ( 'NONE', #8345, #39652, #70653 ) ; +#690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#691 = VERTEX_POINT ( 'NONE', #54603 ) ; +#692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#694 = ADVANCED_FACE ( 'NONE', ( #8679 ), #54430, .F. ) ; +#695 = CONICAL_SURFACE ( 'NONE', #70033, 10.50000000000009600, 0.7853981633974482800 ) ; +#696 = EDGE_LOOP ( 'NONE', ( #12664, #60966, #32544, #80175 ) ) ; +#697 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 46.83333333333333600, -12.20555803803000600 ) ) ; +#698 = EDGE_LOOP ( 'NONE', ( #1039, #45214, #12198 ) ) ; +#699 = FACE_OUTER_BOUND ( 'NONE', #27428, .T. ) ; +#700 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28797, #66024, #78547, #41242 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001089487075302423000 ), + .UNSPECIFIED. ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#702 = FACE_OUTER_BOUND ( 'NONE', #46697, .T. ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 12.00000000000000900, 3.794441961969998300 ) ) ; +#704 = AXIS2_PLACEMENT_3D ( 'NONE', #57008, #19742, #63279 ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( -9.997971278275732800, 20.31091476818473400, -28.25432823872344900 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#707 = ORIENTED_EDGE ( 'NONE', *, *, #75959, .T. ) ; +#708 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386300, 49.66349705304866500, -28.30782889147481600 ) ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 17.24278203529421900, 50.38191708962403900, -28.45083459596128300 ) ) ; +#711 = CIRCLE ( 'NONE', #44763, 10.00000000000009400 ) ; +#712 = ORIENTED_EDGE ( 'NONE', *, *, #19552, .F. ) ; +#713 = EDGE_CURVE ( 'NONE', #39291, #39861, #56375, .T. ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 14.33333333333335300, -10.73183747965883100 ) ) ; +#715 = AXIS2_PLACEMENT_3D ( 'NONE', #30572, #55556, #36781 ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670953300, 17.44136558227940300, -28.48677465922829200 ) ) ; +#717 = EDGE_LOOP ( 'NONE', ( #55709, #59594, #16461, #25337 ) ) ; +#718 = FACE_OUTER_BOUND ( 'NONE', #66548, .T. ) ; +#719 = VERTEX_POINT ( 'NONE', #23615 ) ; +#720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#723 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48536, #5049, #17592, #61110 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259912483400E-007, 0.0004559721492004767500 ), + .UNSPECIFIED. ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389500, 28.66349705304866500, -28.30782889147480900 ) ) ; +#726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#727 = AXIS2_PLACEMENT_3D ( 'NONE', #50221, #37720, #56231 ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#729 = FACE_OUTER_BOUND ( 'NONE', #25719, .T. ) ; +#730 = ORIENTED_EDGE ( 'NONE', *, *, #34524, .T. ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 31.68315603019280500, -28.70555803802998800 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 18.01268492844088000, 39.30637265398669900, -28.24165217761326500 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972574300, 62.22511094383837400, -28.55192314908416800 ) ) ; +#736 = ORIENTED_EDGE ( 'NONE', *, *, #64222, .T. ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 20.44069092601377900, -28.35186440610857200 ) ) ; +#738 = AXIS2_PLACEMENT_3D ( 'NONE', #56948, #25958, #13452 ) ; +#739 = ADVANCED_FACE ( 'NONE', ( #12621 ), #4793, .F. ) ; +#740 = CONICAL_SURFACE ( 'NONE', #55110, 10.00000000000009400, 0.7853981633974447300 ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 51.43945992495533700, -28.34042301926881200 ) ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#743 = CONICAL_SURFACE ( 'NONE', #77199, 10.00000000000009200, 0.7853981633974447300 ) ; +#744 = ORIENTED_EDGE ( 'NONE', *, *, #59557, .F. ) ; +#745 = EDGE_LOOP ( 'NONE', ( #47176, #18816, #2182, #71536 ) ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985000, 81.25732391202392100, -28.20555803802997700 ) ) ; +#747 = EDGE_CURVE ( 'NONE', #15380, #79838, #21368, .T. ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 17.83333333333335000, 0.9380355014189731800 ) ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709898800, 28.56267502090533500, -28.41043597897453300 ) ) ; +#750 = ORIENTED_EDGE ( 'NONE', *, *, #4963, .F. ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#752 = ORIENTED_EDGE ( 'NONE', *, *, #30862, .T. ) ; +#753 = ORIENTED_EDGE ( 'NONE', *, *, #80224, .F. ) ; +#754 = ORIENTED_EDGE ( 'NONE', *, *, #36520, .F. ) ; +#755 = ADVANCED_FACE ( 'NONE', ( #72954 ), #69037, .T. ) ; +#757 = ORIENTED_EDGE ( 'NONE', *, *, #76076, .T. ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#758 = PLANE ( 'NONE', #64952 ) ; +#759 = ORIENTED_EDGE ( 'NONE', *, *, #29521, .T. ) ; +#760 = CONICAL_SURFACE ( 'NONE', #52714, 10.50000000000009600, 0.7853981633974500600 ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 89.97246552159114700, -28.38801640354856600 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#763 = EDGE_CURVE ( 'NONE', #70927, #67972, #66405, .T. ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 67.92318720225497900, -28.70555803802997700 ) ) ; +#766 = EDGE_CURVE ( 'NONE', #26549, #10779, #51886, .T. ) ; +#765 = ORIENTED_EDGE ( 'NONE', *, *, #56914, .F. ) ; +#767 = ADVANCED_FACE ( 'NONE', ( #74894 ), #2828, .F. ) ; +#768 = ORIENTED_EDGE ( 'NONE', *, *, #41278, .T. ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 47.10073525436786200, -28.70555803802996700 ) ) ; +#770 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1999, #1724, #51739, #14535 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.132509068885989200E-016, 0.001246264537621704500 ), + .UNSPECIFIED. ) ; +#771 = CIRCLE ( 'NONE', #68304, 10.50000000000009600 ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736723300, 24.54999999999999700, -28.70555803802994200 ) ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548966000, 30.94069092601377900, -28.35186440610858200 ) ) ; +#774 = AXIS2_PLACEMENT_3D ( 'NONE', #22454, #28759, #9941 ) ; +#775 = EDGE_CURVE ( 'NONE', #66196, #38457, #37436, .T. ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566557200, 45.55000000000000400, -28.70555803802996700 ) ) ; +#777 = EDGE_CURVE ( 'NONE', #77746, #40742, #19393, .T. ) ; +#778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#779 = EDGE_CURVE ( 'NONE', #34668, #59182, #23015, .T. ) ; +#780 = VERTEX_POINT ( 'NONE', #44223 ) ; +#781 = ADVANCED_FACE ( 'NONE', ( #67094 ), #70985, .T. ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 35.05000000000000400, -28.20555803802995200 ) ) ; +#783 = FACE_OUTER_BOUND ( 'NONE', #55567, .T. ) ; +#785 = ORIENTED_EDGE ( 'NONE', *, *, #8153, .F. ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#786 = ORIENTED_EDGE ( 'NONE', *, *, #47076, .F. ) ; +#787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#788 = ADVANCED_FACE ( 'NONE', ( #52457 ), #879, .F. ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 61.50000000000001400, -4.865812075874393000 ) ) ; +#790 = AXIS2_PLACEMENT_3D ( 'NONE', #58464, #39967, #70967 ) ; +#791 = AXIS2_PLACEMENT_3D ( 'NONE', #39672, #14930, #52155 ) ; +#792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 15.99167745881024200, 75.79999999999984100, -28.49360982174002300 ) ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 26.50000000000001400, -7.061964498581022400 ) ) ; +#795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150681700, 41.32033471810044700, -28.30868034705252600 ) ) ; +#797 = FACE_OUTER_BOUND ( 'NONE', #16637, .T. ) ; +#798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 63.83333333333332100, 9.794441961969999600 ) ) ; +#801 = ORIENTED_EDGE ( 'NONE', *, *, #78969, .T. ) ; +#802 = EDGE_LOOP ( 'NONE', ( #54872, #50522, #56346, #69146 ) ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 26.20389005397399300, -28.37519436813177300 ) ) ; +#804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#805 = AXIS2_PLACEMENT_3D ( 'NONE', #5784, #49258, #12048 ) ; +#806 = EDGE_CURVE ( 'NONE', #34788, #72537, #8524, .T. ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384630600, 70.79999999999998300, -28.55171188418376000 ) ) ; +#809 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30867, #12632, #31402, #74902 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061614900E-007, 0.001119323292485706200 ), + .UNSPECIFIED. ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801530200, 50.90033558196108000, -28.70555803802997700 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609168300, 81.46283204837325800, -28.48697406221694800 ) ) ; +#812 = CIRCLE ( 'NONE', #29089, 9.500000000000099500 ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#814 = CONICAL_SURFACE ( 'NONE', #73516, 10.50000000000009600, 0.7853981633974518300 ) ; +#815 = ORIENTED_EDGE ( 'NONE', *, *, #46996, .F. ) ; +#816 = VERTEX_POINT ( 'NONE', #32303 ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#818 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 51.08083798124329200, -28.45106778992438000 ) ) ; +#819 = ORIENTED_EDGE ( 'NONE', *, *, #27535, .F. ) ; +#821 = EDGE_CURVE ( 'NONE', #63087, #80344, #17455, .T. ) ; +#820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65433, #28172, #3360, #46862 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225946018500E-007, 0.001119324643800051300 ), + .UNSPECIFIED. ) ; +#822 = CONICAL_SURFACE ( 'NONE', #10590, 10.00000000000009400, 0.7853981633974447300 ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#824 = ORIENTED_EDGE ( 'NONE', *, *, #13938, .F. ) ; +#825 = EDGE_LOOP ( 'NONE', ( #24497, #78852, #63465, #6496, #34263, #76904 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567173200, 9.746602415621898900, -28.20555803802992800 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#828 = AXIS2_PLACEMENT_3D ( 'NONE', #2270, #45778, #8534 ) ; +#829 = ORIENTED_EDGE ( 'NONE', *, *, #30141, .F. ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 1.869858741100101300, 57.15000000000000600, 6.572849786732822600 ) ) ; +#831 = EDGE_LOOP ( 'NONE', ( #47267, #25604, #49187 ) ) ; +#832 = ORIENTED_EDGE ( 'NONE', *, *, #22665, .T. ) ; +#833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#834 = ORIENTED_EDGE ( 'NONE', *, *, #51259, .T. ) ; +#835 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70319, #51521, #76571, #39303 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635004868200E-007, 0.0008082706238602446400 ), + .UNSPECIFIED. ) ; +#836 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 51.43945992495533700, -28.34042301926881200 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#839 = ORIENTED_EDGE ( 'NONE', *, *, #25942, .F. ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753900, 19.89456479767169800, -28.70555803802994200 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74167, #30393, #80411, #43118 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527065388100E-007, 0.0007303749718167673600 ), + .UNSPECIFIED. ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( 11.51258998854883800, 90.12140959735987200, -28.55996453402223500 ) ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883555100, 9.894351187922357100, -28.41114655922298500 ) ) ; +#845 = FACE_OUTER_BOUND ( 'NONE', #19108, .T. ) ; +#846 = AXIS2_PLACEMENT_3D ( 'NONE', #65855, #28627, #72121 ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #38439, .F. ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 67.33333333333334300, -8.133761268305512700 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459577100, 59.08026449164340500, -28.70555803802997400 ) ) ; +#850 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#851 = EDGE_LOOP ( 'NONE', ( #70752, #32543, #68373 ) ) ; +#852 = VERTEX_POINT ( 'NONE', #75804 ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 57.92318720225498700, -28.70555803802997700 ) ) ; +#854 = CONICAL_SURFACE ( 'NONE', #31274, 10.00000000000009200, 0.7853981633974447300 ) ; +#855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#856 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 30.74660241562190100, -28.20555803802995200 ) ) ; +#857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#858 = AXIS2_PLACEMENT_3D ( 'NONE', #72342, #78598, #28852 ) ; +#859 = PLANE ( 'NONE', #45921 ) ; +#860 = ORIENTED_EDGE ( 'NONE', *, *, #627, .F. ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#862 = VERTEX_POINT ( 'NONE', #1269 ) ; +#863 = EDGE_CURVE ( 'NONE', #14113, #22567, #74879, .T. ) ; +#864 = CONICAL_SURFACE ( 'NONE', #37404, 10.00000000000009200, 0.7853981633974447300 ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #46358, .T. ) ; +#866 = ADVANCED_FACE ( 'NONE', ( #50494 ), #32048, .T. ) ; +#867 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #10567, .T. ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#870 = ADVANCED_FACE ( 'NONE', ( #33994 ), #79732, .T. ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 32.50000000000001400, 4.650848422521012700 ) ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459451400, 82.51973550835676000, -28.70555803803004500 ) ) ; +#873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38424, #32210, #69463, #1186 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574818573500E-007, 0.0004669842289003658200 ), + .UNSPECIFIED. ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630700, 28.42298334620784000, -28.20555803802994200 ) ) ; +#875 = ADVANCED_FACE ( 'NONE', ( #48552 ), #46596, .T. ) ; +#876 = EDGE_CURVE ( 'NONE', #51218, #13553, #60441, .T. ) ; +#877 = CONICAL_SURFACE ( 'NONE', #23347, 10.50000000000009200, 0.7853981633974482800 ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#879 = CONICAL_SURFACE ( 'NONE', #65083, 10.50000000000009600, 0.7853981633974518300 ) ; +#880 = EDGE_CURVE ( 'NONE', #77331, #65478, #63202, .T. ) ; +#881 = VERTEX_POINT ( 'NONE', #39058 ) ; +#882 = ORIENTED_EDGE ( 'NONE', *, *, #67980, .T. ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #39376, .T. ) ; +#884 = EDGE_CURVE ( 'NONE', #52990, #5954, #65164, .T. ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498185300, 59.99827085154640800, -28.24094723680244800 ) ) ; +#886 = PLANE ( 'NONE', #48454 ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471826900, 39.13131911501876200, -28.51286550264508800 ) ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 3.833333333333335300, -4.152999154772353500 ) ) ; +#889 = CONICAL_SURFACE ( 'NONE', #72769, 10.00000000000009200, 0.7853981633974447300 ) ; +#891 = VERTEX_POINT ( 'NONE', #51818 ) ; +#890 = EDGE_CURVE ( 'NONE', #56790, #29982, #45902, .T. ) ; +#892 = CIRCLE ( 'NONE', #69801, 10.00000000000009200 ) ; +#893 = VERTEX_POINT ( 'NONE', #14609 ) ; +#894 = AXIS2_PLACEMENT_3D ( 'NONE', #36849, #80399, #43110 ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195337900, 49.18365405593780100, -28.35038903107285400 ) ) ; +#896 = EDGE_LOOP ( 'NONE', ( #72935, #19909, #29013, #71583 ) ) ; +#897 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#898 = VERTEX_POINT ( 'NONE', #58117 ) ; +#899 = CIRCLE ( 'NONE', #22032, 10.50000000000009600 ) ; +#900 = ORIENTED_EDGE ( 'NONE', *, *, #66240, .F. ) ; +#901 = VERTEX_POINT ( 'NONE', #1796 ) ; +#902 = ORIENTED_EDGE ( 'NONE', *, *, #59724, .T. ) ; +#903 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086483900, 28.97187418724322300, -28.37194250757535500 ) ) ; +#904 = ORIENTED_EDGE ( 'NONE', *, *, #1638, .T. ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 18.58926735914020900, 2.821299597360241900, -25.66772372300866000 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456179600, 70.07527064970105400, -28.39317435246126600 ) ) ; +#907 = VERTEX_POINT ( 'NONE', #64412 ) ; +#908 = ORIENTED_EDGE ( 'NONE', *, *, #78203, .F. ) ; +#909 = AXIS2_PLACEMENT_3D ( 'NONE', #6228, #49700, #12496 ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 16.44668611327872700, 71.48387403443021500, -28.57421789838276600 ) ) ; +#911 = EDGE_CURVE ( 'NONE', #35825, #43447, #23304, .T. ) ; +#912 = EDGE_CURVE ( 'NONE', #39864, #73316, #15505, .T. ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999940000, 10.46823913367206800, -28.70555803802994200 ) ) ; +#915 = AXIS2_PLACEMENT_3D ( 'NONE', #15393, #58891, #21659 ) ; +#914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#916 = EDGE_LOOP ( 'NONE', ( #8370, #71008, #30445, #69499 ) ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345591500, 60.07527064970103200, -28.39317435246134400 ) ) ; +#918 = CONICAL_SURFACE ( 'NONE', #7800, 10.50000000000009900, 0.7853981633974518300 ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.43250300240229200, -28.20555803802997700 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 38.33333333333333600, -3.705558038030004400 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911110900, 70.40166528437727300, -28.28704243186591000 ) ) ; +#922 = ORIENTED_EDGE ( 'NONE', *, *, #30853, .T. ) ; +#923 = ORIENTED_EDGE ( 'NONE', *, *, #51491, .F. ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#925 = ORIENTED_EDGE ( 'NONE', *, *, #3635, .F. ) ; +#926 = EDGE_LOOP ( 'NONE', ( #48234, #67288, #36738, #22952 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813900, 69.60439022488338900, -28.70555803802997700 ) ) ; +#928 = FACE_OUTER_BOUND ( 'NONE', #60579, .T. ) ; +#929 = EDGE_CURVE ( 'NONE', #46657, #40791, #31497, .T. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 22.39521301170162100, 95.29760650585105000, -25.46093279988793900 ) ) ; +#931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#932 = AXIS2_PLACEMENT_3D ( 'NONE', #35473, #78994, #41686 ) ; +#933 = ORIENTED_EDGE ( 'NONE', *, *, #30707, .F. ) ; +#934 = AXIS2_PLACEMENT_3D ( 'NONE', #69550, #14079, #7788 ) ; +#935 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 17.41542217839996100, 61.18375493410853500, -28.40985430318292200 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#938 = EDGE_LOOP ( 'NONE', ( #29450, #4261, #77754, #32688 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 16.75662772119077500, 50.93285558381264600, -28.44931054370689000 ) ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#941 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32555, #38776, #76061, #45016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972906713379200E-007, 0.0005865296644891640200 ), + .UNSPECIFIED. ) ; +#942 = PLANE ( 'NONE', #16449 ) ; +#943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( -12.72730845928327200, 85.79999999999998300, -28.53979898350159800 ) ) ; +#946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#947 = CONICAL_SURFACE ( 'NONE', #37883, 10.00000000000009600, 0.7853981633974447300 ) ; +#948 = EDGE_LOOP ( 'NONE', ( #70050, #26467, #68793 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499807900, 81.76337688193842700, -28.37223523914914800 ) ) ; +#950 = EDGE_LOOP ( 'NONE', ( #55157, #38074, #49827 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( -15.85864231129046200, 45.54999999999999700, -28.50266868976637000 ) ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 72.31032580521099400, -28.59353418718932400 ) ) ; +#953 = EDGE_LOOP ( 'NONE', ( #53528, #13342, #33550, #4456 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540387000, 79.08026449164323400, -28.70555803803019400 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466641400, 9.268939712914631800, -28.57333386111658400 ) ) ; +#956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#957 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36037, #73312, #48502, #11296 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549582421179300E-007, 0.0002592578639937856300 ), + .UNSPECIFIED. ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 26.89962244433174000, -28.53664883431606500 ) ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534570300, 29.49920551340399300, -28.70555803802994200 ) ) ; +#960 = AXIS2_PLACEMENT_3D ( 'NONE', #7431, #50934, #13738 ) ; +#961 = CIRCLE ( 'NONE', #9763, 10.00000000000009200 ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 44.66666666666667100, 8.320721403598824400 ) ) ; +#963 = FACE_OUTER_BOUND ( 'NONE', #66360, .T. ) ; +#964 = ORIENTED_EDGE ( 'NONE', *, *, #18688, .F. ) ; +#965 = ADVANCED_FACE ( 'NONE', ( #30130 ), #77147, .T. ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 9.833333333333342800, -6.205558038030004800 ) ) ; +#967 = AXIS2_PLACEMENT_3D ( 'NONE', #40408, #3133, #46645 ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#969 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33678, #27454, #64724, #77200 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716404000, 0.004080294652942880300 ), + .UNSPECIFIED. ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 12.15857157145701000, -28.20555803802994200 ) ) ; +#971 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#972 = EDGE_CURVE ( 'NONE', #27304, #66453, #37869, .T. ) ; +#973 = FACE_OUTER_BOUND ( 'NONE', #44067, .T. ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #79320, .F. ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 57.94142842854297700, -28.20555803802997700 ) ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #80043, .F. ) ; +#977 = AXIS2_PLACEMENT_3D ( 'NONE', #40368, #3101, #46593 ) ; +#978 = FACE_OUTER_BOUND ( 'NONE', #55420, .T. ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571436800, 61.52858243452105600, -28.70555803802997700 ) ) ; +#980 = ORIENTED_EDGE ( 'NONE', *, *, #61205, .T. ) ; +#981 = ORIENTED_EDGE ( 'NONE', *, *, #63189, .T. ) ; +#982 = ORIENTED_EDGE ( 'NONE', *, *, #32346, .F. ) ; +#983 = ORIENTED_EDGE ( 'NONE', *, *, #2928, .T. ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007438000, 38.31967837323414000, -28.55467576046956800 ) ) ; +#985 = ORIENTED_EDGE ( 'NONE', *, *, #16660, .T. ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#987 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#989 = ADVANCED_FACE ( 'NONE', ( #35944 ), #75819, .T. ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 30.74660241562189700, -28.20555803802995200 ) ) ; +#991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#992 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#993 = CIRCLE ( 'NONE', #45796, 10.00000000000009200 ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 15.62948251660327000, 92.85896503443528600, -28.62599209267576600 ) ) ; +#996 = EDGE_CURVE ( 'NONE', #40818, #77757, #11614, .T. ) ; +#995 = ORIENTED_EDGE ( 'NONE', *, *, #60685, .F. ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#998 = VERTEX_POINT ( 'NONE', #58646 ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #43763, .F. ) ; +#1000 = EDGE_CURVE ( 'NONE', #45464, #70786, #77774, .T. ) ; +#1001 = VERTEX_POINT ( 'NONE', #52647 ) ; +#1002 = ORIENTED_EDGE ( 'NONE', *, *, #64597, .T. ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( -19.58452307240453300, 0.8309571326883410400, -22.74271722628038000 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#1005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#1007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1008 = CONICAL_SURFACE ( 'NONE', #74381, 10.50000000000009600, 0.7853981633974500600 ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 85.79999999999984100, -28.20555803803014400 ) ) ; +#1010 = ORIENTED_EDGE ( 'NONE', *, *, #33336, .F. ) ; +#1011 = EDGE_CURVE ( 'NONE', #36192, #63007, #17033, .T. ) ; +#1012 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33208, #76718, #51936, #14712 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471652208440900E-007, 0.0002673661813021980300 ), + .UNSPECIFIED. ) ; +#1013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1014 = EDGE_CURVE ( 'NONE', #58896, #76860, #28183, .T. ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492445000, 39.70543520232829600, -28.70555803802995200 ) ) ; +#1016 = AXIS2_PLACEMENT_3D ( 'NONE', #26182, #69663, #32414 ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 15.66666666666667700, -5.205558038030003100 ) ) ; +#1018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1019 = FACE_OUTER_BOUND ( 'NONE', #52252, .T. ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( -9.438065798940680700, 28.61613388835921900, -28.57723500840069500 ) ) ; +#1021 = EDGE_LOOP ( 'NONE', ( #67666, #8177, #17484 ) ) ; +#1022 = VERTEX_POINT ( 'NONE', #52917 ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 22.43454006867178700, -28.70555803802998100 ) ) ; +#1024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1025 = AXIS2_PLACEMENT_3D ( 'NONE', #4052, #72348, #72084 ) ; +#1026 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1027 = EDGE_CURVE ( 'NONE', #24594, #32707, #2527, .T. ) ; +#1028 = EDGE_CURVE ( 'NONE', #49483, #72721, #13572, .T. ) ; +#1029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1030 = EDGE_CURVE ( 'NONE', #61551, #52219, #44624, .T. ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#1032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1033 = AXIS2_PLACEMENT_3D ( 'NONE', #55541, #43022, #30558 ) ; +#1034 = ORIENTED_EDGE ( 'NONE', *, *, #79094, .F. ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#1036 = ORIENTED_EDGE ( 'NONE', *, *, #79033, .F. ) ; +#1037 = AXIS2_PLACEMENT_3D ( 'NONE', #20996, #64528, #27252 ) ; +#1038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1039 = ORIENTED_EDGE ( 'NONE', *, *, #53507, .T. ) ; +#1040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1041 = EDGE_CURVE ( 'NONE', #1835, #32629, #59278, .T. ) ; +#1042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1043 = AXIS2_PLACEMENT_3D ( 'NONE', #70773, #58263, #64558 ) ; +#1044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55632, #12140, #74425, #37126 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726977425200, 0.0008135742306951409000 ), + .UNSPECIFIED. ) ; +#1045 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( -4.512589988549025000, 60.12140959735999200, -28.55996453402213600 ) ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 40.90050506338823100, -28.70555803802997700 ) ) ; +#1048 = ADVANCED_FACE ( 'NONE', ( #42711 ), #24244, .F. ) ; +#1049 = CIRCLE ( 'NONE', #73729, 10.00000000000009200 ) ; +#1050 = ORIENTED_EDGE ( 'NONE', *, *, #59154, .T. ) ; +#1051 = ORIENTED_EDGE ( 'NONE', *, *, #66328, .F. ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( 5.148153789003719000, 65.79999999999968500, -28.37148172714601900 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 41.67701665379225100, -28.20555803802997400 ) ) ; +#1054 = VERTEX_POINT ( 'NONE', #72261 ) ; +#1055 = CYLINDRICAL_SURFACE ( 'NONE', #28746, 10.00000000000000000 ) ; +#1056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14658, #51874, #64463, #27185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807184900, 0.0005317208426584885200 ), + .UNSPECIFIED. ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #27611, .F. ) ; +#1058 = ORIENTED_EDGE ( 'NONE', *, *, #34480, .T. ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 16.62238670493033900, 9.241780528841202300, -28.57307362998727000 ) ) ; +#1060 = VERTEX_POINT ( 'NONE', #66001 ) ; +#1061 = ORIENTED_EDGE ( 'NONE', *, *, #8451, .F. ) ; +#1062 = ADVANCED_FACE ( 'NONE', ( #40775 ), #71946, .T. ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 59.33333333333334300, 1.294441961969997200 ) ) ; +#1064 = FACE_OUTER_BOUND ( 'NONE', #5540, .T. ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.94142842854297000, -28.20555803802997700 ) ) ; +#1067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 24.33333333333334600, 2.794441961969998300 ) ) ; +#1069 = AXIS2_PLACEMENT_3D ( 'NONE', #42009, #23535, #54537 ) ; +#1070 = ORIENTED_EDGE ( 'NONE', *, *, #18212, .T. ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 41.46868088498121800, -28.51286550264512700 ) ) ; +#1072 = CONICAL_SURFACE ( 'NONE', #25482, 10.50000000000009600, 0.7853981633974500600 ) ; +#1073 = ORIENTED_EDGE ( 'NONE', *, *, #54378, .F. ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #48513, .T. ) ; +#1075 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1076 = ORIENTED_EDGE ( 'NONE', *, *, #43992, .F. ) ; +#1077 = ADVANCED_FACE ( 'NONE', ( #57328 ), #38802, .F. ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 61.66666666666668600, -10.73183747965883100 ) ) ; +#1079 = EDGE_LOOP ( 'NONE', ( #24840, #6473, #32444 ) ) ; +#1080 = ORIENTED_EDGE ( 'NONE', *, *, #10563, .T. ) ; +#1081 = ORIENTED_EDGE ( 'NONE', *, *, #67202, .T. ) ; +#1082 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269639900, 71.58737389638857000, -28.29936525552443500 ) ) ; +#1083 = FACE_OUTER_BOUND ( 'NONE', #79479, .T. ) ; +#1084 = AXIS2_PLACEMENT_3D ( 'NONE', #45197, #63769, #76249 ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 101.5999999999999900, -18.70555803803001300 ) ) ; +#1086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1087 = ADVANCED_FACE ( 'NONE', ( #26218 ), #66275, .T. ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 90.16749699759768100, -28.20555803802997700 ) ) ; +#1089 = EDGE_CURVE ( 'NONE', #80592, #43819, #73902, .T. ) ; +#1090 = VERTEX_POINT ( 'NONE', #41490 ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540442000, 62.51973550835659700, -28.70555803802997700 ) ) ; +#1092 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1093 = AXIS2_PLACEMENT_3D ( 'NONE', #52394, #15166, #58677 ) ; +#1094 = CIRCLE ( 'NONE', #68068, 9.500000000000101300 ) ; +#1095 = ORIENTED_EDGE ( 'NONE', *, *, #28129, .T. ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484570300, 81.01872124563918500, -28.53757464917570300 ) ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943310400, 35.04999999999997600, -28.70555803802995200 ) ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450500, 76.12096679557673400, -28.36604143581858400 ) ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( -10.98575180313109600, 60.01994747561645500, -28.24986299608865900 ) ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( -4.186539978270701600, 6.877501000800540600, -28.20555803802993100 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 15.51770601915501400, 8.964587961689977300, -28.65180968932673600 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( 3.476547180778678700, 9.410658115921107100, -28.68817749111424900 ) ) ; +#1106 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55895, #6131, #74163, #18648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004737422600E-007, 0.0004089065559708726400 ), + .UNSPECIFIED. ) ; +#1107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1108 = EDGE_CURVE ( 'NONE', #67971, #30265, #68876, .T. ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 65.16666666666668600, 6.794441961969992500 ) ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100658200, 49.12363993080086300, -28.38670679782169200 ) ) ; +#1111 = EDGE_CURVE ( 'NONE', #5208, #11, #9642, .T. ) ; +#1112 = ORIENTED_EDGE ( 'NONE', *, *, #5181, .F. ) ; +#1113 = VERTEX_POINT ( 'NONE', #60289 ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1115 = ORIENTED_EDGE ( 'NONE', *, *, #24165, .T. ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#1119 = EDGE_CURVE ( 'NONE', #73055, #24293, #54411, .T. ) ; +#1120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1121 = EDGE_CURVE ( 'NONE', #47599, #73124, #39953, .T. ) ; +#1122 = CONICAL_SURFACE ( 'NONE', #7450, 10.50000000000009200, 0.7853981633974482800 ) ; +#1123 = ORIENTED_EDGE ( 'NONE', *, *, #58518, .F. ) ; +#1124 = AXIS2_PLACEMENT_3D ( 'NONE', #39875, #70878, #2589 ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #57622, .T. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#1127 = EDGE_CURVE ( 'NONE', #34123, #53544, #25511, .T. ) ; +#1128 = FACE_OUTER_BOUND ( 'NONE', #3516, .T. ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.73237991241951100, -28.26633708900882500 ) ) ; +#1130 = EDGE_LOOP ( 'NONE', ( #77858, #42732, #32209, #8522 ) ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #52985, .T. ) ; +#1132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1133 = ORIENTED_EDGE ( 'NONE', *, *, #18441, .T. ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 30.33333333333334300, -8.133761268305512700 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 61.08083798124328500, -28.45106778992438000 ) ) ; +#1136 = ORIENTED_EDGE ( 'NONE', *, *, #7189, .F. ) ; +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #4850, .F. ) ; +#1138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69178, #6898, #75445, #38149 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351752830100E-007, 0.0004318366892326915900 ), + .UNSPECIFIED. ) ; +#1139 = AXIS2_PLACEMENT_3D ( 'NONE', #42131, #4882, #48379 ) ; +#1140 = FACE_OUTER_BOUND ( 'NONE', #10049, .T. ) ; +#1141 = EDGE_CURVE ( 'NONE', #42164, #30989, #11043, .T. ) ; +#1142 = EDGE_CURVE ( 'NONE', #28145, #50356, #55364, .T. ) ; +#1143 = EDGE_CURVE ( 'NONE', #74884, #32323, #22291, .T. ) ; +#1144 = ADVANCED_FACE ( 'NONE', ( #7654 ), #3776, .T. ) ; +#1145 = VERTEX_POINT ( 'NONE', #30099 ) ; +#1146 = FACE_OUTER_BOUND ( 'NONE', #47317, .T. ) ; +#1147 = AXIS2_PLACEMENT_3D ( 'NONE', #44432, #7192, #50712 ) ; +#1148 = ORIENTED_EDGE ( 'NONE', *, *, #41190, .F. ) ; +#1149 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1150 = ORIENTED_EDGE ( 'NONE', *, *, #57125, .F. ) ; +#1151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17374, #11126, #48607, #11397 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866946693200E-007, 0.001076778502991269300 ), + .UNSPECIFIED. ) ; +#1152 = ORIENTED_EDGE ( 'NONE', *, *, #12341, .F. ) ; +#1153 = ORIENTED_EDGE ( 'NONE', *, *, #73842, .T. ) ; +#1154 = ORIENTED_EDGE ( 'NONE', *, *, #54277, .T. ) ; +#1155 = CIRCLE ( 'NONE', #7995, 9.500000000000099500 ) ; +#1156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1157 = ORIENTED_EDGE ( 'NONE', *, *, #2097, .T. ) ; +#1158 = CONICAL_SURFACE ( 'NONE', #79502, 10.50000000000009600, 0.7853981633974500600 ) ; +#1159 = ADVANCED_FACE ( 'NONE', ( #61263 ), #51428, .T. ) ; +#1160 = AXIS2_PLACEMENT_3D ( 'NONE', #72868, #41577, #54086 ) ; +#1161 = AXIS2_PLACEMENT_3D ( 'NONE', #11532, #55023, #17781 ) ; +#1162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.36203212531319200, -28.38801640354855800 ) ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 1.666666666666677200, 4.294441961969993400 ) ) ; +#1166 = ORIENTED_EDGE ( 'NONE', *, *, #62896, .F. ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1169 = LINE ( 'NONE', #33530, #78077 ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #43856, .F. ) ; +#1172 = ORIENTED_EDGE ( 'NONE', *, *, #22759, .T. ) ; +#1171 = ADVANCED_FACE ( 'NONE', ( #69952 ), #18394, .T. ) ; +#1173 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 19.63499901281402800, 0.7299369465955518600, -22.45679392773325500 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#1177 = AXIS2_PLACEMENT_3D ( 'NONE', #54677, #17430, #60952 ) ; +#1178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 30.57757630314203800, -28.53861367218592100 ) ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( -12.14815378900369700, 65.79999999999999700, -28.37148172714570600 ) ) ; +#1181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76621, #57868, #70642, #33382 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764792089620600E-007, 0.0009376791149928006200 ), + .UNSPECIFIED. ) ; +#1182 = ADVANCED_FACE ( 'NONE', ( #53424 ), #66092, .F. ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459546400, 59.08026449164335500, -28.70555803802997700 ) ) ; +#1184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1185 = AXIS2_PLACEMENT_3D ( 'NONE', #41482, #4218, #47712 ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 9.968680884981223400, -28.51286550264509100 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 51.43650294695131500, -28.30782889147482400 ) ) ; +#1188 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 36.16666666666669300, 0.1341879241256129200 ) ) ; +#1189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1191 = EDGE_CURVE ( 'NONE', #280, #77100, #1809, .T. ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 9.904737509656014200, 17.92298334620663500, -28.20555803803009800 ) ) ; +#1193 = ORIENTED_EDGE ( 'NONE', *, *, #36623, .T. ) ; +#1194 = AXIS2_PLACEMENT_3D ( 'NONE', #36721, #43242, #61778 ) ; +#1195 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1196 = ORIENTED_EDGE ( 'NONE', *, *, #30499, .F. ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 67.94142842854297700, -28.20555803802997700 ) ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 18.26408261090858800, 94.86408261091745000, -28.25702587135910400 ) ) ; +#1199 = ADVANCED_FACE ( 'NONE', ( #68026 ), #16444, .T. ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851406800, 25.50238095238082900, -28.70555803802994200 ) ) ; +#1201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972178200, 72.22511094383835900, -28.55192314908456900 ) ) ; +#1204 = EDGE_LOOP ( 'NONE', ( #8978, #4723, #14182, #18586 ) ) ; +#1205 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62776, #19227, #75264, #37979 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0009376786059871979800 ), + .UNSPECIFIED. ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 57.94142842854307000, -28.20555803802997700 ) ) ; +#1207 = CIRCLE ( 'NONE', #16302, 10.00000000000009200 ) ; +#1208 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658264100, 70.15151454780964000, -28.67627428870436600 ) ) ; +#1209 = ORIENTED_EDGE ( 'NONE', *, *, #5814, .F. ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189800, 41.86172549728279100, -28.47230003642276600 ) ) ; +#1212 = VECTOR ( 'NONE', #8152, 1000.000000000000000 ) ; +#1213 = AXIS2_PLACEMENT_3D ( 'NONE', #34648, #22399, #40889 ) ; +#1214 = VERTEX_POINT ( 'NONE', #61630 ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#1216 = EDGE_LOOP ( 'NONE', ( #68289, #63136, #51734 ) ) ; +#1217 = VECTOR ( 'NONE', #10628, 1000.000000000000000 ) ; +#1219 = ORIENTED_EDGE ( 'NONE', *, *, #29538, .T. ) ; +#1218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1220 = ORIENTED_EDGE ( 'NONE', *, *, #48696, .F. ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661481000, 41.60677350908857600, -28.30799595738883000 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003200, 81.43250300240195800, -28.20555803803030800 ) ) ; +#1223 = ORIENTED_EDGE ( 'NONE', *, *, #15319, .F. ) ; +#1224 = FACE_OUTER_BOUND ( 'NONE', #36903, .T. ) ; +#1225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #26143, .T. ) ; +#1227 = CIRCLE ( 'NONE', #47230, 9.500000000000099500 ) ; +#1228 = EDGE_CURVE ( 'NONE', #5932, #42271, #77358, .T. ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #40484, .T. ) ; +#1231 = EDGE_CURVE ( 'NONE', #22008, #2580, #62915, .T. ) ; +#1230 = ORIENTED_EDGE ( 'NONE', *, *, #63369, .F. ) ; +#1232 = EDGE_LOOP ( 'NONE', ( #42549, #39052, #64217, #65793 ) ) ; +#1233 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12797, #56272, #31558, #75067 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207982721300E-007, 0.0008724366121408896100 ), + .UNSPECIFIED. ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511882000, 89.60439022488299100, -28.70555803803030800 ) ) ; +#1235 = FACE_OUTER_BOUND ( 'NONE', #51180, .T. ) ; +#1236 = VERTEX_POINT ( 'NONE', #55599 ) ; +#1237 = CONICAL_SURFACE ( 'NONE', #54939, 10.00000000000009200, 0.7853981633974447300 ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 7.666666666666681200, 3.124568980892192800 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650651600, 10.01912043132466200, -28.30223257055578800 ) ) ; +#1240 = EDGE_CURVE ( 'NONE', #53679, #20495, #48396, .T. ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877859900, 30.52667319908792400, -28.37233769390154600 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328940900, 17.86201280598323000, -28.29447340919132300 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 10.18929190448943500, -28.20555803802994200 ) ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #63738, .F. ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046900, 70.36203212531218300, -28.38801640354843100 ) ) ; +#1246 = EDGE_CURVE ( 'NONE', #70161, #30160, #33969, .T. ) ; +#1247 = EDGE_CURVE ( 'NONE', #54383, #21089, #19515, .T. ) ; +#1248 = FACE_OUTER_BOUND ( 'NONE', #72203, .T. ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #68720, .T. ) ; +#1250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1251 = FACE_OUTER_BOUND ( 'NONE', #49098, .T. ) ; +#1252 = AXIS2_PLACEMENT_3D ( 'NONE', #70428, #14692, #2149 ) ; +#1253 = EDGE_CURVE ( 'NONE', #71952, #8719, #49479, .T. ) ; +#1254 = EDGE_CURVE ( 'NONE', #19809, #66170, #5034, .T. ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851401500, 36.00238095238081800, -28.70555803802995200 ) ) ; +#1256 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1257 = EDGE_CURVE ( 'NONE', #28278, #24516, #71373, .T. ) ; +#1258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#1262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1263 = AXIS2_PLACEMENT_3D ( 'NONE', #35243, #78753, #41463 ) ; +#1264 = ADVANCED_FACE ( 'NONE', ( #34955 ), #371, .T. ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( -18.29771517139400300, 3.403327190554037400, -26.24770761122442400 ) ) ; +#1266 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655605600, 38.92298334620759400, -28.20555803802996000 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146249800, 51.25732391202375700, -28.20555803803030800 ) ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #48166, .T. ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( -4.002028721724249400, 30.81091476818473800, -28.25432823872346000 ) ) ; +#1272 = ADVANCED_FACE ( 'NONE', ( #36859 ), #56402, .T. ) ; +#1273 = AXIS2_PLACEMENT_3D ( 'NONE', #68914, #31669, #75183 ) ; +#1274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1275 = AXIS2_PLACEMENT_3D ( 'NONE', #67734, #30495, #74010 ) ; +#1276 = AXIS2_PLACEMENT_3D ( 'NONE', #12337, #55816, #18581 ) ; +#1277 = VERTEX_POINT ( 'NONE', #12916 ) ; +#1278 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39947, #77210, #58712, #21476 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674237361284700E-007, 0.0007606607323828859200 ), + .UNSPECIFIED. ) ; +#1279 = ADVANCED_FACE ( 'NONE', ( #64155 ), #14481, .F. ) ; +#1280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 21.59027028261002800, -28.70555803802994500 ) ) ; +#1282 = FACE_OUTER_BOUND ( 'NONE', #36137, .T. ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #69287, .T. ) ; +#1284 = CONICAL_SURFACE ( 'NONE', #22172, 10.50000000000009600, 0.7853981633974500600 ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345380400, 90.27440177985820900, -28.29986836858013900 ) ) ; +#1286 = ORIENTED_EDGE ( 'NONE', *, *, #18320, .T. ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 13.50000000000000400, 4.650848422521012700 ) ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#1289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906698400, 61.67036336027379000, -28.27338767626476800 ) ) ; +#1291 = CIRCLE ( 'NONE', #17304, 9.500000000000101300 ) ; +#1292 = ORIENTED_EDGE ( 'NONE', *, *, #26297, .T. ) ; +#1293 = VERTEX_POINT ( 'NONE', #75186 ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609197000, 23.91466791010192600, -28.53910738522643300 ) ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#1296 = EDGE_LOOP ( 'NONE', ( #80325, #58596, #34567 ) ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074371400, 21.28032162676580100, -28.55467576046953900 ) ) ; +#1298 = EDGE_CURVE ( 'NONE', #6871, #31957, #80674, .T. ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063405500, 10.09789380924860500, -28.25343951603355900 ) ) ; +#1301 = CIRCLE ( 'NONE', #36782, 10.50000000000009200 ) ; +#1302 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#1303 = ORIENTED_EDGE ( 'NONE', *, *, #36914, .T. ) ; +#1304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 10.63950292779719600, 30.93250300240228900, -28.25438406275898700 ) ) ; +#1306 = CONICAL_SURFACE ( 'NONE', #22735, 10.00000000000009200, 0.7853981633974447300 ) ; +#1307 = ORIENTED_EDGE ( 'NONE', *, *, #23065, .T. ) ; +#1308 = EDGE_CURVE ( 'NONE', #72149, #65079, #56916, .T. ) ; +#1309 = ORIENTED_EDGE ( 'NONE', *, *, #8975, .F. ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079882700, 20.43383669612128300, -28.27375072930954400 ) ) ; +#1311 = AXIS2_PLACEMENT_3D ( 'NONE', #40070, #2794, #46292 ) ; +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #27151, .T. ) ; +#1313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1314 = ORIENTED_EDGE ( 'NONE', *, *, #29283, .T. ) ; +#1315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079883000, 30.93383669612129000, -28.27375072930955500 ) ) ; +#1317 = FACE_OUTER_BOUND ( 'NONE', #27901, .T. ) ; +#1318 = EDGE_LOOP ( 'NONE', ( #54386, #31585, #50536 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.66749699759768800, -28.20555803802996700 ) ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116566600, 28.70564881207769800, -28.41114655922287500 ) ) ; +#1321 = VERTEX_POINT ( 'NONE', #37898 ) ; +#1322 = AXIS2_PLACEMENT_3D ( 'NONE', #31948, #75459, #38163 ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999983700, 54.37738371066698300, -28.70555803803047500 ) ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #38764, .T. ) ; +#1325 = CONICAL_SURFACE ( 'NONE', #19533, 10.50000000000009600, 0.7853981633974500600 ) ; +#1327 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22095, #34334, #34612, #78106 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656155510300, 0.001302223101366067600 ), + .UNSPECIFIED. ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 57.16666666666667100, -2.545304000185620600 ) ) ; +#1329 = AXIS2_PLACEMENT_3D ( 'NONE', #59987, #35245, #16457 ) ; +#1330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 22.16666666666667500, -3.349151577478988200 ) ) ; +#1332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1334 = EDGE_CURVE ( 'NONE', #8615, #49034, #31042, .T. ) ; +#1335 = FACE_OUTER_BOUND ( 'NONE', #68042, .T. ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 59.50000000000002100, 6.847000845227646500 ) ) ; +#1337 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1339 = ORIENTED_EDGE ( 'NONE', *, *, #55952, .T. ) ; +#1340 = ORIENTED_EDGE ( 'NONE', *, *, #65762, .F. ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000700, 41.06914835874665900, -28.45573375118225800 ) ) ; +#1342 = ORIENTED_EDGE ( 'NONE', *, *, #55585, .T. ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655604300, 20.67701665379236100, -28.20555803802994500 ) ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#1346 = CIRCLE ( 'NONE', #60523, 9.500000000000095900 ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#1348 = ORIENTED_EDGE ( 'NONE', *, *, #31057, .F. ) ; +#1349 = CIRCLE ( 'NONE', #68520, 10.00000000000009200 ) ; +#1350 = EDGE_CURVE ( 'NONE', #4205, #7944, #5739, .T. ) ; +#1351 = ORIENTED_EDGE ( 'NONE', *, *, #71900, .F. ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049507100, 38.69228657120677200, -28.53891855579985300 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 3.073496928715956600, 51.37839075872579300, -28.29547734244346200 ) ) ; +#1355 = VERTEX_POINT ( 'NONE', #50658 ) ; +#1356 = CONICAL_SURFACE ( 'NONE', #48475, 10.50000000000009600, 0.7853981633974500600 ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730253500, 61.58737389638850600, -28.29936525552453500 ) ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099052600, 31.03732497909462000, -28.41043597897461800 ) ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911110500, 90.40166528437727300, -28.28704243186590300 ) ) ; +#1360 = ORIENTED_EDGE ( 'NONE', *, *, #53272, .T. ) ; +#1361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #42930, .T. ) ; +#1363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #20113, .F. ) ; +#1365 = ADVANCED_FACE ( 'NONE', ( #20343 ), #12542, .T. ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#1368 = AXIS2_PLACEMENT_3D ( 'NONE', #37189, #80732, #74495 ) ; +#1369 = EDGE_CURVE ( 'NONE', #54555, #5676, #29137, .T. ) ; +#1370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1371 = EDGE_CURVE ( 'NONE', #69715, #37428, #42418, .T. ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900903900, 20.53732497909458100, -28.41043597897466100 ) ) ; +#1373 = FACE_OUTER_BOUND ( 'NONE', #64404, .T. ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189000, 49.23827450271716800, -28.47230003642277300 ) ) ; +#1375 = EDGE_CURVE ( 'NONE', #76058, #65591, #78742, .T. ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 80.90050506338822300, -28.70555803802997700 ) ) ; +#1377 = ORIENTED_EDGE ( 'NONE', *, *, #55102, .F. ) ; +#1378 = AXIS2_PLACEMENT_3D ( 'NONE', #42462, #5227, #48707 ) ; +#1379 = LINE ( 'NONE', #69925, #65651 ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 63.00000000000000000, -9.205558038030005700 ) ) ; +#1381 = ORIENTED_EDGE ( 'NONE', *, *, #65010, .F. ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 9.746602415621900700, -28.20555803802992800 ) ) ; +#1383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1384 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25066, #294, #19063, #62596 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565732874229000E-007, 0.0002592140922082522800 ), + .UNSPECIFIED. ) ; +#1385 = ORIENTED_EDGE ( 'NONE', *, *, #46366, .F. ) ; +#1386 = ORIENTED_EDGE ( 'NONE', *, *, #8969, .F. ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465442200, 30.10079448659600100, -28.70555803802995200 ) ) ; +#1388 = ORIENTED_EDGE ( 'NONE', *, *, #61937, .F. ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 1.705837858217827500, 45.54999999999999700, -28.37136602294611300 ) ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #4479, .T. ) ; +#1392 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65778, #22242, #28550, #72035 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.498374721940738900E-018, 0.001246264537621180200 ), + .UNSPECIFIED. ) ; +#1393 = CIRCLE ( 'NONE', #16832, 9.500000000000095900 ) ; +#1394 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1395 = AXIS2_PLACEMENT_3D ( 'NONE', #1345, #44843, #7598 ) ; +#1396 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432775300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#1397 = AXIS2_PLACEMENT_3D ( 'NONE', #66224, #28997, #72479 ) ; +#1398 = ORIENTED_EDGE ( 'NONE', *, *, #11115, .T. ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( -16.68767301991453100, 84.52958894367176900, -28.56367862433818400 ) ) ; +#1401 = ADVANCED_FACE ( 'NONE', ( #45574 ), #27142, .T. ) ; +#1402 = EDGE_CURVE ( 'NONE', #3242, #61214, #28025, .T. ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #67790, .F. ) ; +#1403 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30457, #67699, #42925, #5668 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258881786700E-007, 0.0004559721492010318100 ), + .UNSPECIFIED. ) ; +#1405 = AXIS2_PLACEMENT_3D ( 'NONE', #54110, #29424, #66643 ) ; +#1406 = ORIENTED_EDGE ( 'NONE', *, *, #37092, .T. ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465416400, 39.99920551340398600, -28.70555803802995200 ) ) ; +#1408 = EDGE_LOOP ( 'NONE', ( #18852, #74234, #31229, #43911 ) ) ; +#1409 = ORIENTED_EDGE ( 'NONE', *, *, #26093, .T. ) ; +#1410 = FACE_OUTER_BOUND ( 'NONE', #33021, .T. ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1412 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1413 = EDGE_CURVE ( 'NONE', #74656, #43592, #43636, .T. ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 28.16666666666668600, 6.794441961969992500 ) ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540442900, 72.51973550835660400, -28.70555803802997700 ) ) ; +#1416 = AXIS2_PLACEMENT_3D ( 'NONE', #1570, #70103, #7819 ) ; +#1417 = AXIS2_PLACEMENT_3D ( 'NONE', #65421, #47121, #9887 ) ; +#1418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30272, #23734, #42722, #5488 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794021326400E-007, 0.0009376791149929541400 ), + .UNSPECIFIED. ) ; +#1419 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274328800, 61.29377171558717000, -28.24172590004390000 ) ) ; +#1420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1421 = CONICAL_SURFACE ( 'NONE', #62692, 10.50000000000009600, 0.7853981633974482800 ) ; +#1422 = AXIS2_PLACEMENT_3D ( 'NONE', #75231, #37944, #693 ) ; +#1423 = ORIENTED_EDGE ( 'NONE', *, *, #26633, .F. ) ; +#1424 = CIRCLE ( 'NONE', #71896, 9.500000000000099500 ) ; +#1425 = ORIENTED_EDGE ( 'NONE', *, *, #62037, .T. ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20564, #33333, #76843, #39581 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043633300, 0.007919184322923262000 ), + .UNSPECIFIED. ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, -0.4999999999999870700, -9.258116921287651700 ) ) ; +#1430 = CIRCLE ( 'NONE', #9367, 10.00000000000009600 ) ; +#1431 = AXIS2_PLACEMENT_3D ( 'NONE', #51347, #14147, #57643 ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1433 = FACE_OUTER_BOUND ( 'NONE', #3379, .T. ) ; +#1434 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281059100, 61.13768531620324600, -28.37082013777818500 ) ) ; +#1435 = ORIENTED_EDGE ( 'NONE', *, *, #17710, .F. ) ; +#1436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1437 = FACE_OUTER_BOUND ( 'NONE', #68267, .T. ) ; +#1438 = ORIENTED_EDGE ( 'NONE', *, *, #25946, .T. ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941500, 90.13716795162659400, -28.48697406221667800 ) ) ; +#1440 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1441 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1442 = EDGE_LOOP ( 'NONE', ( #72356, #17358, #69597, #600, #2854 ) ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 59.91070809551060700, -28.20555803802997700 ) ) ; +#1444 = AXIS2_PLACEMENT_3D ( 'NONE', #1353, #69632, #38604 ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180789400, 69.94924284854687400, -28.20555803802997700 ) ) ; +#1446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1447 = ADVANCED_FACE ( 'NONE', ( #62181 ), #44925, .T. ) ; +#1448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1450 = VECTOR ( 'NONE', #63740, 1000.000000000000000 ) ; +#1449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.66749699759768800, -28.20555803802996700 ) ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #50463, .T. ) ; +#1453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1455 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 34.00000000000001400, -1.205558038030002800 ) ) ; +#1454 = LINE ( 'NONE', #34418, #55012 ) ; +#1456 = ORIENTED_EDGE ( 'NONE', *, *, #35480, .F. ) ; +#1457 = CARTESIAN_POINT ( 'NONE', ( 13.10033444816021700, 60.79999999999999000, -28.20555803802990300 ) ) ; +#1458 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1459 = ORIENTED_EDGE ( 'NONE', *, *, #53320, .T. ) ; +#1460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1461 = ORIENTED_EDGE ( 'NONE', *, *, #54520, .T. ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730333000, 81.58737389638861300, -28.29936525552446000 ) ) ; +#1463 = ORIENTED_EDGE ( 'NONE', *, *, #71429, .F. ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 70.16054007504466500, -28.34042301926881500 ) ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 38.00972971738994500, -28.70555803802995600 ) ) ; +#1466 = ADVANCED_FACE ( 'NONE', ( #32970 ), #41699, .T. ) ; +#1467 = CIRCLE ( 'NONE', #73079, 10.00000000000009400 ) ; +#1468 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063254100, 49.50210619075100700, -28.25343951603330300 ) ) ; +#1471 = ORIENTED_EDGE ( 'NONE', *, *, #50790, .T. ) ; +#1470 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 26.42318720225498300, -28.70555803802994200 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.65857157145700300, -28.20555803802997700 ) ) ; +#1473 = EDGE_LOOP ( 'NONE', ( #2831, #61012, #18016, #70478 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 90.24722181384564100, -28.70555803802999500 ) ) ; +#1475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1476 = ORIENTED_EDGE ( 'NONE', *, *, #66316, .T. ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #80735, .F. ) ; +#1478 = FACE_OUTER_BOUND ( 'NONE', #32838, .T. ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#1480 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000074600, 82.97376207875024100, -28.70555803803030800 ) ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761900, 81.43945992495534400, -28.34042301926881500 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155100, 80.69966441803876500, -28.70555803803047500 ) ) ; +#1484 = VERTEX_POINT ( 'NONE', #76498 ) ; +#1485 = ADVANCED_FACE ( 'NONE', ( #58259 ), #8605, .F. ) ; +#1486 = FACE_OUTER_BOUND ( 'NONE', #59788, .T. ) ; +#1487 = EDGE_CURVE ( 'NONE', #68448, #7608, #25181, .T. ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 61.25732391202397800, -28.20555803802997700 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999706900, 83.65857157145697400, -28.20555803803030800 ) ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056691400, 14.04999999999997900, -28.70555803802992800 ) ) ; +#1493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1494 = EDGE_CURVE ( 'NONE', #42272, #41059, #10594, .T. ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1496 = ADVANCED_FACE ( 'NONE', ( #74818 ), #24336, .F. ) ; +#1497 = EDGE_CURVE ( 'NONE', #39968, #62856, #13541, .T. ) ; +#1498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52614, #27929, #46609, #9374 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099550121295900E-007, 0.0008759529789576720300 ), + .UNSPECIFIED. ) ; +#1499 = AXIS2_PLACEMENT_3D ( 'NONE', #73097, #79345, #29600 ) ; +#1500 = CIRCLE ( 'NONE', #11587, 10.00000000000009200 ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 28.47246552159108600, -28.38801640354855800 ) ) ; +#1502 = EDGE_LOOP ( 'NONE', ( #36605, #2873, #78180 ) ) ; +#1503 = EDGE_LOOP ( 'NONE', ( #19226, #40180, #40803, #22256 ) ) ; +#1504 = CIRCLE ( 'NONE', #78084, 10.00000000000009600 ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 5.499999999999999100, -4.865812075874393000 ) ) ; +#1506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21178, #58423, #39921, #2632 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721037315800E-007, 0.001076779618376950100 ), + .UNSPECIFIED. ) ; +#1508 = ORIENTED_EDGE ( 'NONE', *, *, #40798, .F. ) ; +#1507 = EDGE_CURVE ( 'NONE', #9518, #13621, #79847, .T. ) ; +#1509 = EDGE_CURVE ( 'NONE', #38210, #20694, #40872, .T. ) ; +#1510 = EDGE_CURVE ( 'NONE', #32780, #74052, #47539, .T. ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#1512 = AXIS2_PLACEMENT_3D ( 'NONE', #33086, #26596, #2052 ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#1514 = CONICAL_SURFACE ( 'NONE', #65640, 10.00000000000009200, 0.7853981633974447300 ) ; +#1515 = FACE_OUTER_BOUND ( 'NONE', #67681, .T. ) ; +#1516 = EDGE_LOOP ( 'NONE', ( #41039, #33523, #76090 ) ) ; +#1517 = AXIS2_PLACEMENT_3D ( 'NONE', #9986, #16255, #47210 ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298134700, 75.79999999999965600, -28.70555803803030800 ) ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 70.13716795162659400, -28.48697406221667400 ) ) ; +#1520 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7772, #63847, #1787, #45279 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674213989331700E-007, 0.0007606607323826907600 ), + .UNSPECIFIED. ) ; +#1521 = CIRCLE ( 'NONE', #66176, 10.50000000000009600 ) ; +#1522 = AXIS2_PLACEMENT_3D ( 'NONE', #18129, #61668, #24394 ) ; +#1523 = EDGE_LOOP ( 'NONE', ( #71020, #32726, #60428 ) ) ; +#1524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1525 = EDGE_CURVE ( 'NONE', #60130, #54740, #65419, .T. ) ; +#1526 = ORIENTED_EDGE ( 'NONE', *, *, #20941, .T. ) ; +#1527 = AXIS2_PLACEMENT_3D ( 'NONE', #54322, #17083, #60607 ) ; +#1528 = AXIS2_PLACEMENT_3D ( 'NONE', #75691, #25959, #1168 ) ; +#1529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 71.22294471194861400, -28.20555803803047800 ) ) ; +#1531 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3949, #41219, #78516, #47434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387715897600E-007, 0.0007987676590764687800 ), + .UNSPECIFIED. ) ; +#1532 = CONICAL_SURFACE ( 'NONE', #21209, 10.50000000000009600, 0.7853981633974500600 ) ; +#1533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1535 = CIRCLE ( 'NONE', #71602, 9.500000000000101300 ) ; +#1536 = VERTEX_POINT ( 'NONE', #65111 ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492446100, 38.57379779496243800, -28.70555803802996700 ) ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725273700, 35.36787096422371200, -28.37244029424741900 ) ) ; +#1539 = EDGE_LOOP ( 'NONE', ( #67729, #72538, #74617, #18428, #77491 ) ) ; +#1540 = VERTEX_POINT ( 'NONE', #58812 ) ; +#1541 = AXIS2_PLACEMENT_3D ( 'NONE', #31853, #50293, #25605 ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( -16.99921974380700000, 6.001561703099586300, -27.88338298322234400 ) ) ; +#1543 = VERTEX_POINT ( 'NONE', #27846 ) ; +#1544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1546 = CONICAL_SURFACE ( 'NONE', #53717, 10.00000000000009200, 0.7853981633974447300 ) ; +#1547 = CONICAL_SURFACE ( 'NONE', #39559, 10.50000000000009600, 0.7853981633974482800 ) ; +#1548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1549 = VERTEX_POINT ( 'NONE', #77052 ) ; +#1550 = ADVANCED_FACE ( 'NONE', ( #7756 ), #38894, .F. ) ; +#1551 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 65.79999999999982700, -28.20555803803014400 ) ) ; +#1552 = CIRCLE ( 'NONE', #45565, 10.00000000000009400 ) ; +#1553 = AXIS2_PLACEMENT_3D ( 'NONE', #69909, #76166, #26438 ) ; +#1554 = ORIENTED_EDGE ( 'NONE', *, *, #30257, .F. ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901187200, 18.06267502090520700, -28.41043597897433800 ) ) ; +#1556 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 11.33333333333334800, -8.133761268305512700 ) ) ; +#1557 = CARTESIAN_POINT ( 'NONE', ( 15.18312431344644300, 9.816875686553554900, -28.70406746705046100 ) ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703400, 35.98096581827316200, -28.69431509262337300 ) ) ; +#1559 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1560 = ORIENTED_EDGE ( 'NONE', *, *, #4271, .T. ) ; +#1561 = FACE_OUTER_BOUND ( 'NONE', #41712, .T. ) ; +#1562 = ADVANCED_FACE ( 'NONE', ( #72043 ), #5840, .T. ) ; +#1563 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1564 = ORIENTED_EDGE ( 'NONE', *, *, #63124, .F. ) ; +#1565 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25611, #547, #75359, #38073 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539962000, 0.0009765394310395504200 ), + .UNSPECIFIED. ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428564100, 60.07141756547892400, -28.70555803802997700 ) ) ; +#1567 = EDGE_CURVE ( 'NONE', #44346, #58094, #50880, .T. ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856433400, 29.55333467158440500, -28.65803483468292300 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#1570 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1571 = AXIS2_PLACEMENT_3D ( 'NONE', #49503, #12307, #55792 ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000060800, 19.90050506338819500, -28.70555803802995200 ) ) ; +#1573 = CYLINDRICAL_SURFACE ( 'NONE', #55286, 10.00000000000000000 ) ; +#1574 = ORIENTED_EDGE ( 'NONE', *, *, #68104, .T. ) ; +#1575 = ADVANCED_FACE ( 'NONE', ( #57425 ), #53521, .T. ) ; +#1576 = FACE_OUTER_BOUND ( 'NONE', #57983, .T. ) ; +#1577 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#1579 = ORIENTED_EDGE ( 'NONE', *, *, #11522, .F. ) ; +#1580 = VERTEX_POINT ( 'NONE', #53086 ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( -17.24374441227740100, 90.61266709210548200, -28.45058834003056300 ) ) ; +#1582 = CONICAL_SURFACE ( 'NONE', #61893, 10.50000000000009600, 0.7853981633974500600 ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#1585 = EDGE_LOOP ( 'NONE', ( #12075, #22624, #58444 ) ) ; +#1584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1586 = ADVANCED_FACE ( 'NONE', ( #60241 ), #20439, .T. ) ; +#1587 = CONICAL_SURFACE ( 'NONE', #57753, 10.00000000000009200, 0.7853981633974447300 ) ; +#1588 = FACE_OUTER_BOUND ( 'NONE', #48267, .T. ) ; +#1590 = EDGE_CURVE ( 'NONE', #4221, #79210, #36957, .T. ) ; +#1589 = ORIENTED_EDGE ( 'NONE', *, *, #57652, .F. ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530100, 45.23212903577625400, -28.37244029424743300 ) ) ; +#1592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1593 = EDGE_CURVE ( 'NONE', #46914, #5570, #72878, .T. ) ; +#1594 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #9098, .F. ) ; +#1596 = VERTEX_POINT ( 'NONE', #34626 ) ; +#1597 = ADVANCED_FACE ( 'NONE', ( #70049 ), #35057, .F. ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 55.00000000000000000, -1.205558038030002800 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473036700, 51.58737389638859800, -28.29936525552441000 ) ) ; +#1600 = EDGE_CURVE ( 'NONE', #47710, #56951, #36446, .T. ) ; +#1601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 20.00000000000000400, -1.205558038030005300 ) ) ; +#1603 = EDGE_CURVE ( 'NONE', #51524, #21026, #51525, .T. ) ; +#1604 = FACE_OUTER_BOUND ( 'NONE', #52888, .T. ) ; +#1605 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#1606 = ORIENTED_EDGE ( 'NONE', *, *, #32947, .T. ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120821700, 71.21901109451852100, -28.33427604305564900 ) ) ; +#1608 = EDGE_LOOP ( 'NONE', ( #66282, #11287, #7761, #64054 ) ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492350200, 53.03944396378860700, -28.70555803803001300 ) ) ; +#1610 = ORIENTED_EDGE ( 'NONE', *, *, #48056, .F. ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 57.33333333333335700, -6.705558038030005700 ) ) ; +#1612 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77962, #9689, #53192, #15947 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671289092000E-007, 0.0007670610367942025400 ), + .UNSPECIFIED. ) ; +#1613 = VERTEX_POINT ( 'NONE', #28678 ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484628100, 70.22161678501181800, -28.29547179040443800 ) ) ; +#1615 = CONICAL_SURFACE ( 'NONE', #20852, 10.00000000000009200, 0.7853981633974447300 ) ; +#1616 = ORIENTED_EDGE ( 'NONE', *, *, #17148, .T. ) ; +#1617 = AXIS2_PLACEMENT_3D ( 'NONE', #38611, #44851, #75901 ) ; +#1618 = ORIENTED_EDGE ( 'NONE', *, *, #9571, .F. ) ; +#1619 = EDGE_CURVE ( 'NONE', #37113, #32780, #22384, .T. ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725305700, 35.05000000000000400, -28.20555803802995200 ) ) ; +#1621 = EDGE_CURVE ( 'NONE', #9161, #43862, #76749, .T. ) ; +#1622 = EDGE_CURVE ( 'NONE', #56502, #16929, #21999, .T. ) ; +#1623 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830879900, 31.14954451135938000, -28.33400579219035400 ) ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007600, 83.42856308690545600, -28.36981695106822000 ) ) ; +#1625 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1626 = FACE_OUTER_BOUND ( 'NONE', #70851, .T. ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997800, 50.90050506338822300, -28.70555803802997700 ) ) ; +#1628 = AXIS2_PLACEMENT_3D ( 'NONE', #77562, #3829, #41098 ) ; +#1629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507525200, 39.70543520232828200, -28.70555803802995200 ) ) ; +#1631 = ORIENTED_EDGE ( 'NONE', *, *, #67504, .T. ) ; +#1632 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1633 = CIRCLE ( 'NONE', #58958, 10.50000000000009600 ) ; +#1634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 61.43945992495501000, -28.34042301926918800 ) ) ; +#1636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1637 = FACE_OUTER_BOUND ( 'NONE', #45438, .T. ) ; +#1638 = EDGE_CURVE ( 'NONE', #2651, #28981, #68111, .T. ) ; +#1639 = AXIS2_PLACEMENT_3D ( 'NONE', #40930, #28738, #72235 ) ; +#1640 = AXIS2_PLACEMENT_3D ( 'NONE', #41262, #4003, #47491 ) ; +#1641 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1642 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547400, 70.16054007504448000, -28.34042301926906000 ) ) ; +#1643 = VERTEX_POINT ( 'NONE', #2058 ) ; +#1644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57703, #14195, #70198, #32945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736094835600E-007, 0.0006649316450227372700 ), + .UNSPECIFIED. ) ; +#1645 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.62753447840929500, -28.38801640354893500 ) ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958900, 81.46283204837338600, -28.48697406221667400 ) ) ; +#1647 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 60.83333333333332900, 6.794441961969992500 ) ) ; +#1649 = CONICAL_SURFACE ( 'NONE', #39066, 10.00000000000009400, 0.7853981633974447300 ) ; +#1650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1651 = ORIENTED_EDGE ( 'NONE', *, *, #23147, .F. ) ; +#1652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #59986, .T. ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 16.19858693502893100, 94.72249899919880500, -28.20555803803014400 ) ) ; +#1655 = EDGE_LOOP ( 'NONE', ( #43961, #53027, #45942, #18683, #54375 ) ) ; +#1656 = CIRCLE ( 'NONE', #79051, 10.50000000000009600 ) ; +#1657 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1658 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#1659 = AXIS2_PLACEMENT_3D ( 'NONE', #52292, #71095, #33842 ) ; +#1660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701863500, 65.79999999999996900, -28.70555803802997700 ) ) ; +#1662 = EDGE_LOOP ( 'NONE', ( #32298, #68127, #66344, #62012 ) ) ; +#1663 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62251, #37447, #43701, #6467 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387406165700E-007, 0.0007987676590763779200 ), + .UNSPECIFIED. ) ; +#1664 = AXIS2_PLACEMENT_3D ( 'NONE', #7803, #51293, #14088 ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 69.77559325427188200, -28.45987523529578700 ) ) ; +#1666 = CONICAL_SURFACE ( 'NONE', #75049, 10.50000000000009600, 0.7853981633974500600 ) ; +#1667 = ORIENTED_EDGE ( 'NONE', *, *, #77874, .T. ) ; +#1668 = ADVANCED_FACE ( 'NONE', ( #55459 ), #16540, .T. ) ; +#1669 = EDGE_CURVE ( 'NONE', #10390, #27401, #7507, .T. ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#1671 = AXIS2_PLACEMENT_3D ( 'NONE', #3123, #3391, #9669 ) ; +#1672 = ADVANCED_FACE ( 'NONE', ( #18481 ), #64248, .T. ) ; +#1673 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 26.00000000000001400, -9.205558038030005700 ) ) ; +#1674 = ORIENTED_EDGE ( 'NONE', *, *, #45152, .F. ) ; +#1675 = AXIS2_PLACEMENT_3D ( 'NONE', #48445, #42190, #11230 ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492639300, 17.57379779496234900, -28.70555803802992800 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648800, 41.51912043132468700, -28.30223257055582000 ) ) ; +#1678 = ADVANCED_FACE ( 'NONE', ( #33062 ), #31141, .T. ) ; +#1679 = FACE_OUTER_BOUND ( 'NONE', #68089, .T. ) ; +#1680 = CONICAL_SURFACE ( 'NONE', #53242, 10.50000000000009200, 0.7853981633974482800 ) ; +#1681 = ORIENTED_EDGE ( 'NONE', *, *, #53716, .T. ) ; +#1682 = AXIS2_PLACEMENT_3D ( 'NONE', #23907, #67403, #30187 ) ; +#1683 = EDGE_LOOP ( 'NONE', ( #18303, #52956, #78975 ) ) ; +#1684 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922500300, 60.09037803491499100, -28.29483400905889200 ) ) ; +#1685 = ORIENTED_EDGE ( 'NONE', *, *, #59904, .T. ) ; +#1686 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38341, #38608, #1358, #44850 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572456305100E-007, 0.0004669842289003639300 ), + .UNSPECIFIED. ) ; +#1687 = ORIENTED_EDGE ( 'NONE', *, *, #26260, .T. ) ; +#1688 = ORIENTED_EDGE ( 'NONE', *, *, #17230, .T. ) ; +#1689 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1691 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, -2.666666666666660700, 8.320721403598817300 ) ) ; +#1693 = FACE_OUTER_BOUND ( 'NONE', #67101, .T. ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#1695 = EDGE_CURVE ( 'NONE', #63837, #72055, #73869, .T. ) ; +#1696 = ORIENTED_EDGE ( 'NONE', *, *, #27636, .T. ) ; +#1697 = ORIENTED_EDGE ( 'NONE', *, *, #46394, .F. ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655937800, 17.92298334620740300, -28.20555803802993500 ) ) ; +#1699 = EDGE_CURVE ( 'NONE', #891, #61248, #59402, .T. ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#1701 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 31.18929190448939400, -28.20555803802996700 ) ) ; +#1704 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 81.22294471194857100, -28.20555803803047800 ) ) ; +#1703 = CIRCLE ( 'NONE', #65250, 10.00000000000009200 ) ; +#1705 = EDGE_CURVE ( 'NONE', #69763, #719, #44876, .T. ) ; +#1706 = ORIENTED_EDGE ( 'NONE', *, *, #10268, .F. ) ; +#1707 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1708 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385308600, 17.99322649091134400, -28.30799595738867300 ) ) ; +#1709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274461300, 20.29377171558734400, -28.24172590004348700 ) ) ; +#1711 = EDGE_CURVE ( 'NONE', #54750, #42265, #30498, .T. ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 31.83333333333333600, -2.545304000185615800 ) ) ; +#1713 = EDGE_CURVE ( 'NONE', #27733, #52657, #66186, .T. ) ; +#1714 = CONICAL_SURFACE ( 'NONE', #56242, 10.50000000000009600, 0.7853981633974500600 ) ; +#1715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1716 = ORIENTED_EDGE ( 'NONE', *, *, #73700, .T. ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 10.75693756550914400, 61.43482212736761000, -28.29548618595849900 ) ) ; +#1718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1719 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 71.25732391202359400, -28.20555803803030800 ) ) ; +#1720 = EDGE_LOOP ( 'NONE', ( #73567, #3870, #78654, #63698, #58504 ) ) ; +#1721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1722 = ORIENTED_EDGE ( 'NONE', *, *, #64503, .T. ) ; +#1723 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899094900, 38.62363993080119700, -28.38670679782149600 ) ) ; +#1725 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1726 = CONICAL_SURFACE ( 'NONE', #62851, 10.00000000000009200, 0.7853981633974447300 ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541600700, 41.01125751638933500, -28.53740755999529500 ) ) ; +#1728 = AXIS2_PLACEMENT_3D ( 'NONE', #43539, #68319, #24815 ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100562300, 41.97636006919922400, -28.38670679782177300 ) ) ; +#1730 = EDGE_CURVE ( 'NONE', #28497, #48521, #47633, .T. ) ; +#1731 = EDGE_CURVE ( 'NONE', #74886, #55473, #16018, .T. ) ; +#1732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1733 = EDGE_CURVE ( 'NONE', #24258, #25195, #1909, .T. ) ; +#1734 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16067, #34847, #10083, #53592 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001707792749031534800 ), + .UNSPECIFIED. ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003200, 81.35277818615382700, -28.70555803803016200 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 33.15857157145691000, -28.20555803802996700 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#1738 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#1740 = AXIS2_PLACEMENT_3D ( 'NONE', #16161, #59687, #22415 ) ; +#1741 = CIRCLE ( 'NONE', #19769, 10.50000000000009600 ) ; +#1742 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658372900, 71.44848545218980000, -28.67627428870429500 ) ) ; +#1745 = EDGE_LOOP ( 'NONE', ( #1061, #54557, #73791 ) ) ; +#1746 = AXIS2_PLACEMENT_3D ( 'NONE', #19305, #62853, #25584 ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 90.36203212531317800, -28.38801640354855800 ) ) ; +#1748 = AXIS2_PLACEMENT_3D ( 'NONE', #46333, #52609, #2836 ) ; +#1749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1750 = AXIS2_PLACEMENT_3D ( 'NONE', #46155, #8895, #52412 ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195355300, 49.18365405593805700, -28.35038903107271200 ) ) ; +#1752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1753 = FACE_OUTER_BOUND ( 'NONE', #43912, .T. ) ; +#1754 = CONICAL_SURFACE ( 'NONE', #20377, 10.00000000000009200, 0.7853981633974447300 ) ; +#1755 = EDGE_LOOP ( 'NONE', ( #27581, #47813, #73828, #31362 ) ) ; +#1756 = ORIENTED_EDGE ( 'NONE', *, *, #71441, .T. ) ; +#1757 = EDGE_LOOP ( 'NONE', ( #53535, #79137, #51974 ) ) ; +#1758 = ORIENTED_EDGE ( 'NONE', *, *, #13845, .F. ) ; +#1759 = ORIENTED_EDGE ( 'NONE', *, *, #48916, .T. ) ; +#1760 = ORIENTED_EDGE ( 'NONE', *, *, #65313, .F. ) ; +#1761 = VERTEX_POINT ( 'NONE', #3675 ) ; +#1763 = ORIENTED_EDGE ( 'NONE', *, *, #36128, .T. ) ; +#1762 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488121600, 89.60439022488317600, -28.70555803803014400 ) ) ; +#1764 = ADVANCED_FACE ( 'NONE', ( #80763 ), #29225, .F. ) ; +#1765 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 3.333333333333343700, 1.294441961969997200 ) ) ; +#1766 = AXIS2_PLACEMENT_3D ( 'NONE', #37817, #555, #44051 ) ; +#1767 = ORIENTED_EDGE ( 'NONE', *, *, #14351, .F. ) ; +#1768 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#1770 = EDGE_LOOP ( 'NONE', ( #70477, #59489, #37735, #42947 ) ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#1772 = CIRCLE ( 'NONE', #16753, 10.50000000000009800 ) ; +#1773 = ORIENTED_EDGE ( 'NONE', *, *, #70340, .T. ) ; +#1774 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#1775 = EDGE_CURVE ( 'NONE', #31065, #77331, #1531, .T. ) ; +#1776 = ORIENTED_EDGE ( 'NONE', *, *, #36732, .F. ) ; +#1777 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73976, #5689, #49176, #11963 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073965018400, 0.0005839769583133804100 ), + .UNSPECIFIED. ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( -17.40875264640682100, 41.17947987789651200, -28.41157636893867900 ) ) ; +#1779 = CIRCLE ( 'NONE', #69850, 10.50000000000009600 ) ; +#1780 = VERTEX_POINT ( 'NONE', #16485 ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159369800, 19.40190441413935600, -28.70555803803001600 ) ) ; +#1783 = ORIENTED_EDGE ( 'NONE', *, *, #3890, .F. ) ; +#1782 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1784 = ADVANCED_FACE ( 'NONE', ( #78835 ), #72254, .T. ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507590000, 18.70543520232814000, -28.70555803803009500 ) ) ; +#1786 = CARTESIAN_POINT ( 'NONE', ( -4.214258556543914100, 90.07527064970089700, -28.39317435246118400 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( -1.851846210996839400, 75.79999999999984100, -28.37148172714633200 ) ) ; +#1788 = AXIS2_PLACEMENT_3D ( 'NONE', #26763, #70249, #32999 ) ; +#1789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1790 = CIRCLE ( 'NONE', #56728, 10.00000000000009400 ) ; +#1791 = ORIENTED_EDGE ( 'NONE', *, *, #45283, .F. ) ; +#1792 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000047100, 80.34510448120779800, -28.37193179497729600 ) ) ; +#1793 = VERTEX_POINT ( 'NONE', #60010 ) ; +#1794 = PLANE ( 'NONE', #2608 ) ; +#1795 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825473900, 80.16054007504465100, -28.34042301926890100 ) ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000400, 44.44999999999999600, -18.70555803802999200 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965628600, 17.92298334620783600, -28.20555803802992800 ) ) ; +#1798 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1799 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1800 = AXIS2_PLACEMENT_3D ( 'NONE', #37786, #6803, #49751 ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#1802 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1803 = EDGE_CURVE ( 'NONE', #72226, #5448, #62271, .T. ) ; +#1804 = CONICAL_SURFACE ( 'NONE', #63508, 10.00000000000009200, 0.7853981633974447300 ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 9.166666666666678500, 6.794441961969992500 ) ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328925900, 20.73798719401658600, -28.29447340919113800 ) ) ; +#1809 = CIRCLE ( 'NONE', #36916, 10.50000000000009800 ) ; +#1810 = EDGE_LOOP ( 'NONE', ( #43857, #7621, #17921, #41552, #21015, #9094, #40197, #65711 ) ) ; +#1811 = ORIENTED_EDGE ( 'NONE', *, *, #23665, .T. ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( -10.24297557446558000, 70.16517473503391500, -28.29551658696701500 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686890500, 90.01994747561568000, -28.24986299608891100 ) ) ; +#1815 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#1816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75585, #13867, #32613, #76118 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206657226600E-005, 0.001076779618376926900 ), + .UNSPECIFIED. ) ; +#1817 = CONICAL_SURFACE ( 'NONE', #36291, 10.50000000000009600, 0.7853981633974500600 ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533672300, 10.29130857014988900, -28.37223374938525600 ) ) ; +#1819 = ORIENTED_EDGE ( 'NONE', *, *, #35926, .T. ) ; +#1820 = FACE_OUTER_BOUND ( 'NONE', #68140, .T. ) ; +#1821 = VERTEX_POINT ( 'NONE', #35266 ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510927800, 28.97143078992715500, -28.37063977681166400 ) ) ; +#1824 = EDGE_CURVE ( 'NONE', #50428, #42850, #45672, .T. ) ; +#1823 = ORIENTED_EDGE ( 'NONE', *, *, #34992, .F. ) ; +#1825 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1826 = EDGE_CURVE ( 'NONE', #14507, #49213, #67867, .T. ) ; +#1827 = EDGE_LOOP ( 'NONE', ( #18135, #48806, #24315, #11312 ) ) ; +#1828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49986, #6509, #62549, #25295 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.382119777489788600E-016, 0.001179148174663845800 ), + .UNSPECIFIED. ) ; +#1829 = CIRCLE ( 'NONE', #63745, 10.00000000000009600 ) ; +#1830 = ORIENTED_EDGE ( 'NONE', *, *, #77290, .T. ) ; +#1831 = ORIENTED_EDGE ( 'NONE', *, *, #4739, .F. ) ; +#1832 = ORIENTED_EDGE ( 'NONE', *, *, #54582, .F. ) ; +#1833 = ORIENTED_EDGE ( 'NONE', *, *, #52583, .F. ) ; +#1834 = ORIENTED_EDGE ( 'NONE', *, *, #24147, .T. ) ; +#1835 = VERTEX_POINT ( 'NONE', #4491 ) ; +#1836 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2271, #45779, #52036, #14808 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025930300, 0.0006251342085520519900 ), + .UNSPECIFIED. ) ; +#1837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1839 = AXIS2_PLACEMENT_3D ( 'NONE', #59943, #22670, #66199 ) ; +#1840 = EDGE_LOOP ( 'NONE', ( #9649, #40720, #46480 ) ) ; +#1841 = EDGE_CURVE ( 'NONE', #29955, #59550, #53405, .T. ) ; +#1842 = EDGE_CURVE ( 'NONE', #57143, #23353, #38917, .T. ) ; +#1843 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1844 = EDGE_CURVE ( 'NONE', #43972, #58131, #24487, .T. ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#1846 = ADVANCED_FACE ( 'NONE', ( #3861 ), #17278, .T. ) ; +#1847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71567, #28081, #40542, #3268 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925583485600E-007, 0.0004431156063177199400 ), + .UNSPECIFIED. ) ; +#1848 = EDGE_CURVE ( 'NONE', #57450, #37598, #10026, .T. ) ; +#1849 = FACE_OUTER_BOUND ( 'NONE', #56618, .T. ) ; +#1850 = AXIS2_PLACEMENT_3D ( 'NONE', #14625, #58132, #20887 ) ; +#1851 = EDGE_LOOP ( 'NONE', ( #52053, #78438, #18966, #36663 ) ) ; +#1852 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ; +#1853 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1854 = ORIENTED_EDGE ( 'NONE', *, *, #16901, .T. ) ; +#1855 = ORIENTED_EDGE ( 'NONE', *, *, #57975, .F. ) ; +#1856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1857 = FACE_OUTER_BOUND ( 'NONE', #80076, .T. ) ; +#1858 = ADVANCED_FACE ( 'NONE', ( #14574 ), #10680, .T. ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 52.83333333333335000, 0.1341879241256075400 ) ) ; +#1860 = AXIS2_PLACEMENT_3D ( 'NONE', #10247, #53741, #16499 ) ; +#1861 = AXIS2_PLACEMENT_3D ( 'NONE', #2031, #57549, #14565 ) ; +#1862 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534584000, 39.99920551340398600, -28.70555803802995200 ) ) ; +#1863 = ORIENTED_EDGE ( 'NONE', *, *, #71308, .T. ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 89.97246552159114700, -28.38801640354856600 ) ) ; +#1865 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 17.83333333333335000, 0.9380355014189731800 ) ) ; +#1866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1867 = CYLINDRICAL_SURFACE ( 'NONE', #78074, 10.00000000000000000 ) ; +#1868 = EDGE_LOOP ( 'NONE', ( #65271, #45352, #16006, #39571 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1870 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 52.31032580521100100, -28.59353418718932400 ) ) ; +#1871 = ADVANCED_FACE ( 'NONE', ( #76849 ), #58359, .T. ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 55.16666666666667900, 1.741883078712356500 ) ) ; +#1873 = ORIENTED_EDGE ( 'NONE', *, *, #61014, .T. ) ; +#1874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1875 = VERTEX_POINT ( 'NONE', #30094 ) ; +#1876 = AXIS2_PLACEMENT_3D ( 'NONE', #42929, #5673, #49165 ) ; +#1877 = EDGE_CURVE ( 'NONE', #32629, #64739, #76325, .T. ) ; +#1878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79121, #72863, #29382, #41831 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735926810700E-007, 0.0009376786059871911500 ), + .UNSPECIFIED. ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274725800, 24.86787096422378300, -28.37244029424744000 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 2.997978530266233800, 39.28907435382948400, -28.25433648786265200 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#1882 = ADVANCED_FACE ( 'NONE', ( #60341 ), #25285, .T. ) ; +#1883 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686878300, 51.58005252438373100, -28.24986299608874100 ) ) ; +#1884 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1886 = CONICAL_SURFACE ( 'NONE', #68132, 10.50000000000009600, 0.7853981633974500600 ) ; +#1887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1888 = EDGE_CURVE ( 'NONE', #20123, #27266, #41799, .T. ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#1890 = CIRCLE ( 'NONE', #12411, 9.500000000000101300 ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( 11.42773891679212600, 8.799999999999503300, -28.63329695482264000 ) ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999999100, 67.22261628933270600, -28.70555803802997700 ) ) ; +#1893 = AXIS2_PLACEMENT_3D ( 'NONE', #23931, #67435, #30203 ) ; +#1894 = ORIENTED_EDGE ( 'NONE', *, *, #30166, .T. ) ; +#1895 = AXIS2_PLACEMENT_3D ( 'NONE', #79451, #17167, #35923 ) ; +#1896 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274336000, 57.93535825203924400, -28.53896444442201000 ) ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000074600, 63.20037755566797000, -28.53664883431634200 ) ) ; +#1899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1901 = ORIENTED_EDGE ( 'NONE', *, *, #37706, .F. ) ; +#1902 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034432500, 31.17701665379225800, -28.20555803802996000 ) ) ; +#1903 = PLANE ( 'NONE', #15266 ) ; +#1904 = CIRCLE ( 'NONE', #32597, 10.00000000000009600 ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567142500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#1906 = VERTEX_POINT ( 'NONE', #17823 ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047600, 80.36203212531219700, -28.38801640354842300 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823699600, 31.90456253568397200, -28.61277292027075700 ) ) ; +#1909 = CIRCLE ( 'NONE', #46299, 10.50000000000009800 ) ; +#1910 = AXIS2_PLACEMENT_3D ( 'NONE', #42039, #4779, #48280 ) ; +#1911 = ORIENTED_EDGE ( 'NONE', *, *, #23774, .T. ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 58.66666666666667100, -8.133761268305512700 ) ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880586900, 34.42896305882239700, -28.53160243214819000 ) ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 71.08083798124323500, -28.45106778992441600 ) ) ; +#1915 = EDGE_LOOP ( 'NONE', ( #32938, #35230, #10272 ) ) ; +#1916 = CIRCLE ( 'NONE', #76692, 10.50000000000009600 ) ; +#1917 = ORIENTED_EDGE ( 'NONE', *, *, #7934, .T. ) ; +#1918 = ORIENTED_EDGE ( 'NONE', *, *, #23533, .T. ) ; +#1920 = ORIENTED_EDGE ( 'NONE', *, *, #80022, .F. ) ; +#1919 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#1921 = ORIENTED_EDGE ( 'NONE', *, *, #76100, .T. ) ; +#1922 = EDGE_LOOP ( 'NONE', ( #32469, #52666, #64090 ) ) ; +#1923 = EDGE_LOOP ( 'NONE', ( #17398, #69124, #47381 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 22.43454006867178000, -28.70555803802998100 ) ) ; +#1926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1927 = AXIS2_PLACEMENT_3D ( 'NONE', #73882, #24102, #30370 ) ; +#1929 = EDGE_LOOP ( 'NONE', ( #59031, #61682, #62281, #60282 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466624000, 19.76893971291457000, -28.57333386111661300 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654360100, 70.07527064970095400, -28.39317435246139400 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 51.25732391202398500, -28.20555803802997700 ) ) ; +#1932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16153, #53407, #78449, #3891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736117344500E-007, 0.0006649316450229606200 ), + .UNSPECIFIED. ) ; +#1933 = EDGE_LOOP ( 'NONE', ( #297, #25183, #23172 ) ) ; +#1934 = FACE_OUTER_BOUND ( 'NONE', #32194, .T. ) ; +#1935 = EDGE_CURVE ( 'NONE', #7843, #67594, #61894, .T. ) ; +#1936 = ORIENTED_EDGE ( 'NONE', *, *, #25234, .F. ) ; +#1937 = ORIENTED_EDGE ( 'NONE', *, *, #43321, .F. ) ; +#1938 = ORIENTED_EDGE ( 'NONE', *, *, #55584, .T. ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#1940 = CONICAL_SURFACE ( 'NONE', #21242, 10.00000000000009400, 0.7853981633974447300 ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 23.83333333333333600, 6.794441961969992500 ) ) ; +#1942 = EDGE_LOOP ( 'NONE', ( #61127, #2359, #8923, #32156 ) ) ; +#1943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1945 = ORIENTED_EDGE ( 'NONE', *, *, #9484, .F. ) ; +#1946 = ADVANCED_FACE ( 'NONE', ( #43724 ), #56386, .F. ) ; +#1947 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26780, #64325, #33283, #76795 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882729132600E-007, 0.0004435496461723031200 ), + .UNSPECIFIED. ) ; +#1948 = EDGE_CURVE ( 'NONE', #69992, #18312, #72967, .T. ) ; +#1949 = CIRCLE ( 'NONE', #60342, 9.500000000000099500 ) ; +#1950 = VERTEX_POINT ( 'NONE', #74126 ) ; +#1951 = EDGE_CURVE ( 'NONE', #67043, #68238, #47382, .T. ) ; +#1952 = ORIENTED_EDGE ( 'NONE', *, *, #44095, .T. ) ; +#1953 = ADVANCED_FACE ( 'NONE', ( #8695 ), #6763, .T. ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274463800, 9.793771715587338300, -28.24172590004348000 ) ) ; +#1955 = EDGE_CURVE ( 'NONE', #58276, #16645, #23319, .T. ) ; +#1956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64999, #71776, #78010, #40740 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01103343117100363500, 0.01117762389919586600 ), + .UNSPECIFIED. ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#1958 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 67.33333333333334300, -8.133761268305512700 ) ) ; +#1959 = EDGE_CURVE ( 'NONE', #52334, #47046, #32949, .T. ) ; +#1960 = AXIS2_PLACEMENT_3D ( 'NONE', #5778, #49249, #12040 ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1962 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1963 = CIRCLE ( 'NONE', #75058, 10.00000000000009200 ) ; +#1964 = ADVANCED_FACE ( 'NONE', ( #39853 ), #37882, .T. ) ; +#1965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1966 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40076, #34108, #3076, #46572 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711325393300E-007, 0.0008482615949373497100 ), + .UNSPECIFIED. ) ; +#1967 = ORIENTED_EDGE ( 'NONE', *, *, #64582, .T. ) ; +#1968 = ORIENTED_EDGE ( 'NONE', *, *, #49357, .F. ) ; +#1969 = CARTESIAN_POINT ( 'NONE', ( -16.33099763933875800, 13.47317079140168300, -28.62115403300391800 ) ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#1971 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1972 = AXIS2_PLACEMENT_3D ( 'NONE', #24907, #55892, #68411 ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 40.34772751981643800, -28.70555803802999500 ) ) ; +#1974 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59017, #71266, #46465, #21771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.673614460242277400E-017, 0.001707792749031502500 ), + .UNSPECIFIED. ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 10.12596376456287200, 9.632690823624765000, -28.36487527072564800 ) ) ; +#1976 = EDGE_CURVE ( 'NONE', #20598, #23799, #18499, .T. ) ; +#1977 = EDGE_CURVE ( 'NONE', #35408, #74451, #4027, .T. ) ; +#1978 = ADVANCED_FACE ( 'NONE', ( #27243 ), #4805, .T. ) ; +#1979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1981 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1980 = AXIS2_PLACEMENT_3D ( 'NONE', #66708, #29487, #72962 ) ; +#1982 = CIRCLE ( 'NONE', #12250, 10.50000000000009600 ) ; +#1983 = ORIENTED_EDGE ( 'NONE', *, *, #18794, .T. ) ; +#1984 = CARTESIAN_POINT ( 'NONE', ( -19.97155789205645600, 0.05688421588670170000, -19.93543921666504200 ) ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218861100, 50.17436051799352700, -28.45080305021056300 ) ) ; +#1986 = ORIENTED_EDGE ( 'NONE', *, *, #14534, .T. ) ; +#1987 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 29.66666666666667100, 1.294441961969997200 ) ) ; +#1988 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1989 = CONICAL_SURFACE ( 'NONE', #64708, 10.00000000000009200, 0.7853981633974447300 ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725288800, 34.73212903577621100, -28.37244029424744300 ) ) ; +#1991 = EDGE_LOOP ( 'NONE', ( #36347, #41142, #22337 ) ) ; +#1992 = EDGE_LOOP ( 'NONE', ( #4116, #60875, #70308, #9937, #14500 ) ) ; +#1993 = EDGE_LOOP ( 'NONE', ( #12563, #62328, #43132, #64414 ) ) ; +#1994 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#1995 = ORIENTED_EDGE ( 'NONE', *, *, #66347, .F. ) ; +#1996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1998 = ORIENTED_EDGE ( 'NONE', *, *, #52550, .T. ) ; +#1997 = EDGE_CURVE ( 'NONE', #17997, #14948, #74909, .T. ) ; +#1999 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344080000, 38.92298334620767300, -28.20555803802995200 ) ) ; +#2000 = ADVANCED_FACE ( 'NONE', ( #21381 ), #35962, .F. ) ; +#2001 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2002 = AXIS2_PLACEMENT_3D ( 'NONE', #22051, #65585, #28345 ) ; +#2003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2004 = AXIS2_PLACEMENT_3D ( 'NONE', #25967, #44382, #38154 ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408275600, 49.88586625357844200, -28.27331438134756800 ) ) ; +#2006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265455200, 60.27440177985818100, -28.29986836858019200 ) ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( 9.233681164915744000, 94.21465145973552100, -28.37247945210592800 ) ) ; +#2009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( -3.427738916792670400, 8.799999999999828400, -28.63329695482268300 ) ) ; +#2011 = CONICAL_SURFACE ( 'NONE', #48899, 10.50000000000009400, 0.7853981633974500600 ) ; +#2012 = EDGE_LOOP ( 'NONE', ( #75600, #58304, #5456, #70472 ) ) ; +#2013 = ORIENTED_EDGE ( 'NONE', *, *, #9575, .F. ) ; +#2014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489073600, 41.12856921007284000, -28.37063977681168200 ) ) ; +#2016 = ORIENTED_EDGE ( 'NONE', *, *, #31080, .F. ) ; +#2017 = ORIENTED_EDGE ( 'NONE', *, *, #14315, .T. ) ; +#2018 = EDGE_LOOP ( 'NONE', ( #34894, #75071, #33372, #73801 ) ) ; +#2019 = ORIENTED_EDGE ( 'NONE', *, *, #972, .T. ) ; +#2020 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#2022 = FACE_OUTER_BOUND ( 'NONE', #64401, .T. ) ; +#2023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2025 = ORIENTED_EDGE ( 'NONE', *, *, #7385, .F. ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( -1.266348137463069200E-013, 83.65857157145696000, -28.20555803803014400 ) ) ; +#2027 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11039, #66790, #17282, #60821 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389841069200E-007, 0.0008082646680357285700 ), + .UNSPECIFIED. ) ; +#2028 = AXIS2_PLACEMENT_3D ( 'NONE', #56308, #19059, #62587 ) ; +#2029 = CONICAL_SURFACE ( 'NONE', #41481, 10.50000000000009600, 0.7853981633974500600 ) ; +#2030 = EDGE_LOOP ( 'NONE', ( #5851, #47944, #40910, #63276 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#2032 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 1.166666666666676300, -2.545304000185620600 ) ) ; +#2033 = AXIS2_PLACEMENT_3D ( 'NONE', #33029, #8245, #51747 ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473788300, 38.73827450271181800, -28.47230003642365000 ) ) ; +#2035 = EDGE_CURVE ( 'NONE', #52911, #15774, #70332, .T. ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#2037 = AXIS2_PLACEMENT_3D ( 'NONE', #46233, #8970, #52494 ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654376300, 71.52472935029865700, -28.39317435246151100 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.47246552159109000, -28.38801640354855500 ) ) ; +#2040 = ORIENTED_EDGE ( 'NONE', *, *, #3132, .T. ) ; +#2041 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ; +#2042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2043 = ORIENTED_EDGE ( 'NONE', *, *, #11052, .F. ) ; +#2044 = ADVANCED_FACE ( 'NONE', ( #49565 ), #2843, .F. ) ; +#2045 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1891, #39150, #14431, #57942 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002139977954366327700, 0.002490143138874768700 ), + .UNSPECIFIED. ) ; +#2046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 3.639502927797199300, 30.93250300240228900, -28.25438406275898700 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.49747404049694000, -28.26641963845899900 ) ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390318300, 90.13716795162640900, -28.48697406221641500 ) ) ; +#2052 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#2054 = CIRCLE ( 'NONE', #64340, 10.00000000000009400 ) ; +#2055 = ORIENTED_EDGE ( 'NONE', *, *, #23342, .F. ) ; +#2056 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ; +#2057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2058 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026328900, 45.54999999999999700, -28.70555803802996700 ) ) ; +#2059 = EDGE_CURVE ( 'NONE', #77643, #44986, #54446, .T. ) ; +#2060 = ADVANCED_FACE ( 'NONE', ( #12638 ), #34009, .T. ) ; +#2061 = ORIENTED_EDGE ( 'NONE', *, *, #71344, .T. ) ; +#2062 = CONICAL_SURFACE ( 'NONE', #44256, 10.00000000000009200, 0.7853981633974447300 ) ; +#2064 = EDGE_CURVE ( 'NONE', #57688, #26934, #50511, .T. ) ; +#2063 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17516, #61037, #67271, #30049 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634440577500E-007, 0.0008082706238601833900 ), + .UNSPECIFIED. ) ; +#2065 = ORIENTED_EDGE ( 'NONE', *, *, #12779, .F. ) ; +#2066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2067 = ORIENTED_EDGE ( 'NONE', *, *, #34154, .F. ) ; +#2068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 60.07141756547892400, -28.70555803802997700 ) ) ; +#2070 = ORIENTED_EDGE ( 'NONE', *, *, #68929, .F. ) ; +#2071 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 51.65075715145312800, -28.20555803802997700 ) ) ; +#2073 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#2074 = ADVANCED_FACE ( 'NONE', ( #69048 ), #65180, .T. ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 53.99926474563210400, -28.70555803803001600 ) ) ; +#2076 = CIRCLE ( 'NONE', #47863, 10.50000000000009600 ) ; +#2077 = EDGE_CURVE ( 'NONE', #79198, #45917, #892, .T. ) ; +#2078 = ADVANCED_FACE ( 'NONE', ( #52475 ), #48569, .T. ) ; +#2079 = EDGE_CURVE ( 'NONE', #14140, #38210, #55871, .T. ) ; +#2081 = ORIENTED_EDGE ( 'NONE', *, *, #29921, .F. ) ; +#2080 = AXIS2_PLACEMENT_3D ( 'NONE', #27377, #15111, #39858 ) ; +#2082 = LINE ( 'NONE', #62611, #79016 ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528177500, 49.63131911501876200, -28.51286550264510900 ) ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 7.000000000000006200, -9.205558038030005700 ) ) ; +#2085 = ORIENTED_EDGE ( 'NONE', *, *, #41776, .T. ) ; +#2086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269454300, 71.58737389638834300, -28.29936525552456000 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 15.04683942065166000, 9.906321158696682600, -28.70522894562343600 ) ) ; +#2089 = ORIENTED_EDGE ( 'NONE', *, *, #1141, .F. ) ; +#2090 = ORIENTED_EDGE ( 'NONE', *, *, #38867, .T. ) ; +#2091 = ORIENTED_EDGE ( 'NONE', *, *, #9100, .F. ) ; +#2092 = VERTEX_POINT ( 'NONE', #75966 ) ; +#2093 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2094 = FACE_OUTER_BOUND ( 'NONE', #57334, .T. ) ; +#2095 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747118300, 9.968680884981161200, -28.51286550264485000 ) ) ; +#2096 = AXIS2_PLACEMENT_3D ( 'NONE', #72801, #35557, #79068 ) ; +#2097 = EDGE_CURVE ( 'NONE', #16201, #45025, #41426, .T. ) ; +#2098 = EDGE_CURVE ( 'NONE', #12163, #12259, #26994, .T. ) ; +#2099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2100 = EDGE_CURVE ( 'NONE', #42984, #76219, #67108, .T. ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571433300, 28.57141756547892100, -28.70555803802994200 ) ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 37.62623792124938400, -28.70555803802995200 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#2104 = AXIS2_PLACEMENT_3D ( 'NONE', #18118, #61655, #24381 ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965575000, 41.67701665379186000, -28.20555803802996700 ) ) ; +#2106 = FACE_OUTER_BOUND ( 'NONE', #42799, .T. ) ; +#2107 = ORIENTED_EDGE ( 'NONE', *, *, #16275, .F. ) ; +#2108 = EDGE_LOOP ( 'NONE', ( #14726, #37250, #13475, #1456, #39897, #15530 ) ) ; +#2109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2110 = EDGE_CURVE ( 'NONE', #11747, #60512, #70999, .T. ) ; +#2111 = AXIS2_PLACEMENT_3D ( 'NONE', #20395, #39116, #32882 ) ; +#2112 = AXIS2_PLACEMENT_3D ( 'NONE', #41060, #47010, #10055 ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#2114 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 80.51916201875612000, -28.45106778992441600 ) ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 67.22261628933269200, -28.70555803802997700 ) ) ; +#2116 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54716, #54980, #24008, #67501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293631900, 0.0007746639185392647000 ), + .UNSPECIFIED. ) ; +#2117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2118 = ORIENTED_EDGE ( 'NONE', *, *, #20666, .F. ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#2120 = ORIENTED_EDGE ( 'NONE', *, *, #65983, .F. ) ; +#2121 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 50.66666666666667100, -3.705558038030004400 ) ) ; +#2122 = AXIS2_PLACEMENT_3D ( 'NONE', #24473, #67982, #30732 ) ; +#2123 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 51.46283204837339300, -28.48697406221667400 ) ) ; +#2124 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#2125 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865854200, 9.687272620894303200, -28.28853693900640200 ) ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 15.66666666666667700, -5.205558038030003100 ) ) ; +#2127 = FACE_OUTER_BOUND ( 'NONE', #47678, .T. ) ; +#2128 = AXIS2_PLACEMENT_3D ( 'NONE', #66436, #29210, #72694 ) ; +#2129 = ORIENTED_EDGE ( 'NONE', *, *, #58577, .T. ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 2.997971278275732800, 41.31091476818471600, -28.25432823872345300 ) ) ; +#2131 = FACE_OUTER_BOUND ( 'NONE', #12587, .T. ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819088100, 71.65075715145258100, -28.20555803803014100 ) ) ; +#2133 = EDGE_LOOP ( 'NONE', ( #43748, #41170, #4593 ) ) ; +#2134 = CIRCLE ( 'NONE', #53106, 9.500000000000101300 ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 53.00000000000000700, -1.205558038030002800 ) ) ; +#2136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2137 = VERTEX_POINT ( 'NONE', #14229 ) ; +#2138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63978, #7898, #7625, #26710 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213599292500E-007, 0.0008724366121414529600 ), + .UNSPECIFIED. ) ; +#2139 = ORIENTED_EDGE ( 'NONE', *, *, #11907, .T. ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #80624, .T. ) ; +#2141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2142 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2143 = VERTEX_POINT ( 'NONE', #26502 ) ; +#2145 = AXIS2_PLACEMENT_3D ( 'NONE', #60037, #53749, #29062 ) ; +#2144 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31034, #62043, #43500, #6260 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722070873900E-007, 0.0002592600401781018200 ), + .UNSPECIFIED. ) ; +#2146 = FACE_OUTER_BOUND ( 'NONE', #64125, .T. ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( -10.22125914545564400, 49.66476764525111800, -28.30311733712048600 ) ) ; +#2149 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.65857157145701000, -28.20555803802997700 ) ) ; +#2152 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#2153 = VERTEX_POINT ( 'NONE', #38949 ) ; +#2154 = EDGE_LOOP ( 'NONE', ( #26673, #3695, #79389 ) ) ; +#2155 = FACE_OUTER_BOUND ( 'NONE', #8924, .T. ) ; +#2156 = AXIS2_PLACEMENT_3D ( 'NONE', #39823, #77087, #27345 ) ; +#2157 = ORIENTED_EDGE ( 'NONE', *, *, #21642, .F. ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811160000, 77.05460903980838300, -28.69802137271993600 ) ) ; +#2159 = ORIENTED_EDGE ( 'NONE', *, *, #8279, .F. ) ; +#2160 = CARTESIAN_POINT ( 'NONE', ( -15.99167745881035100, 65.79999999999998300, -28.49360982173995500 ) ) ; +#2161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27235, #20705, #33468, #76985 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711422351500E-007, 0.0008482615949374400300 ), + .UNSPECIFIED. ) ; +#2162 = ORIENTED_EDGE ( 'NONE', *, *, #22948, .T. ) ; +#2163 = ORIENTED_EDGE ( 'NONE', *, *, #2064, .T. ) ; +#2164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2165 = FACE_OUTER_BOUND ( 'NONE', #69058, .T. ) ; +#2166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2167 = VERTEX_POINT ( 'NONE', #32989 ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224813700, 60.09037803491489200, -28.29483400905887400 ) ) ; +#2169 = ADVANCED_FACE ( 'NONE', ( #17471 ), #70243, .T. ) ; +#2170 = FACE_OUTER_BOUND ( 'NONE', #35442, .T. ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( -16.76918824634331500, 70.94994472024610800, -28.43636979168675100 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820119600, 70.08258585630862600, -28.27509349209150700 ) ) ; +#2173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2174 = ADVANCED_FACE ( 'NONE', ( #32060 ), #13588, .F. ) ; +#2175 = EDGE_LOOP ( 'NONE', ( #59567, #43588, #72763, #46253 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 57.94142842854304100, -28.20555803802997700 ) ) ; +#2177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2178 = EDGE_CURVE ( 'NONE', #44569, #56186, #30147, .T. ) ; +#2179 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 56.50000000000002800, 4.650848422521016300 ) ) ; +#2180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2181 = CONICAL_SURFACE ( 'NONE', #34117, 10.50000000000009600, 0.7853981633974500600 ) ; +#2182 = ORIENTED_EDGE ( 'NONE', *, *, #40463, .T. ) ; +#2183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2184 = PRESENTATION_STYLE_ASSIGNMENT (( #62514 ) ) ; +#2185 = EDGE_CURVE ( 'NONE', #57525, #52560, #19406, .T. ) ; +#2186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 89.91070809551072800, -28.20555803803030800 ) ) ; +#2188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#2190 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 19.89456479767167400, -28.70555803802994200 ) ) ; +#2191 = EDGE_CURVE ( 'NONE', #80592, #998, #12523, .T. ) ; +#2192 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2194 = ADVANCED_FACE ( 'NONE', ( #15522 ), #70784, .T. ) ; +#2193 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30008, #73490, #48697, #11490 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200795838800, 0.0008866563355341033100 ), + .UNSPECIFIED. ) ; +#2195 = EDGE_CURVE ( 'NONE', #60832, #76599, #63215, .T. ) ; +#2196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2197 = EDGE_CURVE ( 'NONE', #39898, #36371, #78858, .T. ) ; +#2198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2199 = ORIENTED_EDGE ( 'NONE', *, *, #48301, .F. ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846310500, 80.79999999999998300, -28.55171188418376400 ) ) ; +#2201 = VERTEX_POINT ( 'NONE', #2755 ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 21.66666666666667500, -8.133761268305512700 ) ) ; +#2203 = AXIS2_PLACEMENT_3D ( 'NONE', #22221, #65759, #28528 ) ; +#2204 = EDGE_CURVE ( 'NONE', #65256, #4551, #77793, .T. ) ; +#2205 = EDGE_CURVE ( 'NONE', #79198, #80789, #64395, .T. ) ; +#2206 = EDGE_CURVE ( 'NONE', #30178, #71408, #61279, .T. ) ; +#2207 = ORIENTED_EDGE ( 'NONE', *, *, #1494, .F. ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965677300, 17.92298334620755900, -28.20555803803042500 ) ) ; +#2209 = CIRCLE ( 'NONE', #15222, 9.500000000000101300 ) ; +#2210 = EDGE_LOOP ( 'NONE', ( #60057, #39349, #35897, #26493 ) ) ; +#2211 = CONICAL_SURFACE ( 'NONE', #74824, 10.50000000000009800, 0.7853981633974500600 ) ; +#2212 = ORIENTED_EDGE ( 'NONE', *, *, #17369, .F. ) ; +#2213 = AXIS2_PLACEMENT_3D ( 'NONE', #74748, #207, #31245 ) ; +#2214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2215 = ORIENTED_EDGE ( 'NONE', *, *, #30957, .F. ) ; +#2216 = CIRCLE ( 'NONE', #78323, 10.50000000000009600 ) ; +#2217 = ORIENTED_EDGE ( 'NONE', *, *, #18796, .F. ) ; +#2218 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#2219 = ORIENTED_EDGE ( 'NONE', *, *, #38752, .T. ) ; +#2220 = AXIS2_PLACEMENT_3D ( 'NONE', #16476, #53719, #29030 ) ; +#2221 = AXIS2_PLACEMENT_3D ( 'NONE', #74273, #36961, #80506 ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#2223 = CIRCLE ( 'NONE', #71244, 9.500000000000099500 ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 65.16666666666668600, 6.794441961969992500 ) ) ; +#2225 = ORIENTED_EDGE ( 'NONE', *, *, #75852, .F. ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2227 = CONICAL_SURFACE ( 'NONE', #67053, 10.00000000000009200, 0.7853981633974415100 ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( 6.984606392996569000E-015, 22.20037755566822600, -28.53664883431608600 ) ) ; +#2229 = EDGE_LOOP ( 'NONE', ( #18150, #6014, #6613, #52261 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484570300, 90.58127875436078100, -28.53757464917570300 ) ) ; +#2231 = ORIENTED_EDGE ( 'NONE', *, *, #22441, .T. ) ; +#2232 = ORIENTED_EDGE ( 'NONE', *, *, #69075, .F. ) ; +#2233 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60763, #60493, #54207, #67002 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.540979117872439000E-018, 0.002676326193402467800 ), + .UNSPECIFIED. ) ; +#2234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( -16.42208926844536500, 39.11339344823292000, -28.58282679407406900 ) ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#2237 = EDGE_LOOP ( 'NONE', ( #14301, #62139, #39278, #19268 ) ) ; +#2238 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2239 = FACE_OUTER_BOUND ( 'NONE', #37439, .T. ) ; +#2240 = AXIS2_PLACEMENT_3D ( 'NONE', #4796, #48297, #11082 ) ; +#2241 = CARTESIAN_POINT ( 'NONE', ( 10.36049707220281300, 41.43250300240230600, -28.25438406275900100 ) ) ; +#2243 = ORIENTED_EDGE ( 'NONE', *, *, #39021, .F. ) ; +#2242 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2244 = ADVANCED_FACE ( 'NONE', ( #46610 ), #42731, .T. ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 5.533180123657627900, 55.79999999999950000, -28.37307693585081100 ) ) ; +#2246 = ORIENTED_EDGE ( 'NONE', *, *, #26297, .F. ) ; +#2247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2248 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .F. ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( -23.18391959032359000, 5.908040204838291800, -24.48497144683614500 ) ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 10.18929190448943500, -28.20555803802994200 ) ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 27.50000000000000700, -4.865812075874393000 ) ) ; +#2252 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223652700, 81.76592160028390300, -28.37510699173804300 ) ) ; +#2253 = VERTEX_POINT ( 'NONE', #65387 ) ; +#2254 = EDGE_CURVE ( 'NONE', #69606, #19093, #75829, .T. ) ; +#2255 = CIRCLE ( 'NONE', #76344, 10.50000000000009600 ) ; +#2256 = AXIS2_PLACEMENT_3D ( 'NONE', #33856, #77371, #40095 ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528425300, 28.63131911501858100, -28.51286550264480400 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.68929190448939400, -28.20555803802997700 ) ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#2260 = ADVANCED_FACE ( 'NONE', ( #44635 ), #73916, .F. ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#2262 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( -4.512728101709797100, 81.47860083896996700, -28.56001287362840600 ) ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#2267 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492306000, 53.03944396378784600, -28.70555803803004500 ) ) ; +#2268 = AXIS2_PLACEMENT_3D ( 'NONE', #53575, #16323, #59848 ) ; +#2269 = FACE_OUTER_BOUND ( 'NONE', #58794, .T. ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 31.18929190448939400, -28.20555803802996700 ) ) ; +#2272 = ADVANCED_FACE ( 'NONE', ( #59298 ), #40789, .T. ) ; +#2273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 28.74722181384564800, -28.70555803802998100 ) ) ; +#2275 = ORIENTED_EDGE ( 'NONE', *, *, #35910, .F. ) ; +#2276 = CARTESIAN_POINT ( 'NONE', ( -3.530520547801695200, 91.59999999999999400, -28.70555803802999500 ) ) ; +#2277 = VERTEX_POINT ( 'NONE', #65629 ) ; +#2278 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2280 = ADVANCED_FACE ( 'NONE', ( #79752 ), #7669, .F. ) ; +#2279 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27914, #65156, #40367, #3100 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377689776298500E-007, 0.0007331055842533527900 ), + .UNSPECIFIED. ) ; +#2281 = CIRCLE ( 'NONE', #36533, 10.50000000000009600 ) ; +#2282 = ORIENTED_EDGE ( 'NONE', *, *, #67386, .T. ) ; +#2283 = FACE_OUTER_BOUND ( 'NONE', #34891, .T. ) ; +#2285 = EDGE_CURVE ( 'NONE', #7275, #63036, #24255, .T. ) ; +#2284 = EDGE_LOOP ( 'NONE', ( #2815, #38498, #7168, #36049 ) ) ; +#2286 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7758, #26584, #45268, #8032 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.619092186529966700E-016, 0.001179148174666943100 ), + .UNSPECIFIED. ) ; +#2287 = CONICAL_SURFACE ( 'NONE', #20410, 10.00000000000009600, 0.7853981633974447300 ) ; +#2288 = ORIENTED_EDGE ( 'NONE', *, *, #49487, .T. ) ; +#2289 = EDGE_LOOP ( 'NONE', ( #19576, #28174, #46228, #13516 ) ) ; +#2290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7362, #44592, #57168, #19914 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#2291 = VERTEX_POINT ( 'NONE', #53366 ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, -0.9999999999999833500, -1.205558038030002800 ) ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 49.74722181384564800, -28.70555803802999200 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999940000, 10.46823913367206800, -28.70555803802994200 ) ) ; +#2295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4257, #16781, #41777, #4530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674160448900E-007, 0.0007987728781051986900 ), + .UNSPECIFIED. ) ; +#2296 = VECTOR ( 'NONE', #71238, 1000.000000000000000 ) ; +#2297 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2298 = ORIENTED_EDGE ( 'NONE', *, *, #48290, .T. ) ; +#2299 = EDGE_CURVE ( 'NONE', #19770, #77798, #9656, .T. ) ; +#2300 = CONICAL_SURFACE ( 'NONE', #59174, 10.00000000000009400, 0.7853981633974447300 ) ; +#2301 = EDGE_CURVE ( 'NONE', #19508, #22368, #49858, .T. ) ; +#2302 = EDGE_LOOP ( 'NONE', ( #57252, #35604, #71410, #54795, #42336 ) ) ; +#2303 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2305 = VERTEX_POINT ( 'NONE', #3844 ) ; +#2306 = ORIENTED_EDGE ( 'NONE', *, *, #56647, .F. ) ; +#2307 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477648800, 70.38589569235173800, -28.27354076558380000 ) ) ; +#2308 = ORIENTED_EDGE ( 'NONE', *, *, #37758, .F. ) ; +#2309 = CONICAL_SURFACE ( 'NONE', #19443, 10.50000000000009600, 0.7853981633974518300 ) ; +#2310 = AXIS2_PLACEMENT_3D ( 'NONE', #25784, #988, #44474 ) ; +#2311 = EDGE_CURVE ( 'NONE', #67056, #21477, #11626, .T. ) ; +#2312 = EDGE_CURVE ( 'NONE', #39773, #38287, #71962, .T. ) ; +#2313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2314 = EDGE_CURVE ( 'NONE', #26685, #53312, #26230, .T. ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( 1.939071942967055100, 10.00000000000003700, -28.70555803802998100 ) ) ; +#2316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 42.50000000000002100, -9.258116921287651700 ) ) ; +#2320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2321 = ORIENTED_EDGE ( 'NONE', *, *, #7798, .F. ) ; +#2322 = AXIS2_PLACEMENT_3D ( 'NONE', #80580, #55808, #6059 ) ; +#2323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2324 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274565100, 14.36787096422366300, -28.37244029424749000 ) ) ; +#2325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2326 = VERTEX_POINT ( 'NONE', #28939 ) ; +#2327 = FACE_OUTER_BOUND ( 'NONE', #32347, .T. ) ; +#2328 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115500, 71.19833471562218100, -28.28704243186578200 ) ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( -11.62764753347696500, 94.50078697889557600, -28.27843125503092700 ) ) ; +#2330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44730, #38486, #984, #7500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.709724693207104400E-017, 0.001246264537621185400 ), + .UNSPECIFIED. ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086483200, 41.12812581275677800, -28.37194250757537300 ) ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034406200, 28.42298334620740300, -28.20555803802994500 ) ) ; +#2333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449975400, 89.83662311806180900, -28.37223523914888900 ) ) ; +#2335 = AXIS2_PLACEMENT_3D ( 'NONE', #799, #69100, #62863 ) ; +#2336 = AXIS2_PLACEMENT_3D ( 'NONE', #23871, #73634, #61141 ) ; +#2337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2338 = AXIS2_PLACEMENT_3D ( 'NONE', #73710, #36419, #79967 ) ; +#2339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40402, #65206, #28217, #71708 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885286500 ), + .UNSPECIFIED. ) ; +#2340 = ADVANCED_FACE ( 'NONE', ( #38818 ), #36876, .F. ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( 10.87131228498023600, 7.471333297324841600, -28.40074127503924500 ) ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#2343 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116467200, 49.70564881207762700, -28.41114655922300600 ) ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 4.833333333333352600, 6.794441961969992500 ) ) ; +#2346 = CIRCLE ( 'NONE', #21637, 10.00000000000009600 ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( -10.53518765398293600, 9.406791769321971600, -28.68794773163825000 ) ) ; +#2350 = EDGE_LOOP ( 'NONE', ( #58686, #68961, #17312, #70998 ) ) ; +#2351 = ADVANCED_FACE ( 'NONE', ( #55380 ), #3793, .F. ) ; +#2352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2353 = AXIS2_PLACEMENT_3D ( 'NONE', #21876, #46578, #34380 ) ; +#2354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2355 = EDGE_CURVE ( 'NONE', #36626, #25758, #35469, .T. ) ; +#2356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2357 = ORIENTED_EDGE ( 'NONE', *, *, #15227, .F. ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( -11.18653997827070200, 6.877501000800540600, -28.20555803802993100 ) ) ; +#2359 = ORIENTED_EDGE ( 'NONE', *, *, #80727, .F. ) ; +#2360 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( 16.45764012468446300, 86.42426956854235700, -28.60339038649748000 ) ) ; +#2362 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 73.89610994602601600, -28.37519436813181200 ) ) ; +#2363 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ; +#2364 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484955900, 59.28967419478918500, -28.59353418718928100 ) ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 16.99797127827574900, 20.31091476818473400, -28.25432823872344600 ) ) ; +#2366 = CONICAL_SURFACE ( 'NONE', #67450, 10.00000000000009200, 0.7853981633974447300 ) ; +#2367 = ORIENTED_EDGE ( 'NONE', *, *, #80004, .F. ) ; +#2368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2369 = ADVANCED_FACE ( 'NONE', ( #22307 ), #72691, .T. ) ; +#2370 = EDGE_CURVE ( 'NONE', #34228, #68448, #57341, .T. ) ; +#2371 = CIRCLE ( 'NONE', #37527, 10.50000000000009600 ) ; +#2372 = FACE_OUTER_BOUND ( 'NONE', #44908, .T. ) ; +#2373 = AXIS2_PLACEMENT_3D ( 'NONE', #28371, #71855, #34591 ) ; +#2375 = ORIENTED_EDGE ( 'NONE', *, *, #16127, .F. ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701865300, 75.79999999999998300, -28.70555803802997700 ) ) ; +#2376 = ORIENTED_EDGE ( 'NONE', *, *, #34631, .T. ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804074100, 26.44142842854297000, -28.37229765499279200 ) ) ; +#2378 = VERTEX_POINT ( 'NONE', #72951 ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 17.24306493325787000, 51.43482203710600200, -28.29548531139007000 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 77.94142842854304800, -28.20555803803030800 ) ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153423900, 60.80000000000002600, -28.55171188418382000 ) ) ; +#2382 = ADVANCED_FACE ( 'NONE', ( #5755 ), #18404, .F. ) ; +#2383 = CIRCLE ( 'NONE', #9634, 10.00000000000009200 ) ; +#2384 = EDGE_LOOP ( 'NONE', ( #64182, #79002, #35984, #4118 ) ) ; +#2385 = AXIS2_PLACEMENT_3D ( 'NONE', #289, #43787, #6557 ) ; +#2386 = CYLINDRICAL_SURFACE ( 'NONE', #16429, 10.00000000000000000 ) ; +#2387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2388 = VERTEX_POINT ( 'NONE', #60710 ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#2390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27968, #65235, #40436, #3157 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.146134352336429100E-017, 0.001492013864175071500 ), + .UNSPECIFIED. ) ; +#2391 = EDGE_LOOP ( 'NONE', ( #62735, #55426, #26936, #61370, #7844 ) ) ; +#2392 = EDGE_LOOP ( 'NONE', ( #61586, #68654, #63563, #17752 ) ) ; +#2393 = EDGE_LOOP ( 'NONE', ( #42553, #46953, #64179, #29101 ) ) ; +#2394 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 20.44069092601379400, -28.35186440610856100 ) ) ; +#2395 = EDGE_LOOP ( 'NONE', ( #59705, #127, #58394, #25150 ) ) ; +#2396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31117, #80596, #25110, #68633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560432900, 0.003631405919786738400 ), + .UNSPECIFIED. ) ; +#2397 = ADVANCED_FACE ( 'NONE', ( #1820 ), #66112, .F. ) ; +#2398 = CIRCLE ( 'NONE', #40761, 10.50000000000009800 ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 48.50000000000000000, 2.454695999814380200 ) ) ; +#2400 = ORIENTED_EDGE ( 'NONE', *, *, #14841, .F. ) ; +#2401 = AXIS2_PLACEMENT_3D ( 'NONE', #57391, #32636, #76142 ) ; +#2402 = ORIENTED_EDGE ( 'NONE', *, *, #24986, .T. ) ; +#2403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086483600, 9.628125812756774600, -28.37194250757535100 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 13.50000000000000400, 4.650848422521012700 ) ) ; +#2408 = ORIENTED_EDGE ( 'NONE', *, *, #43720, .F. ) ; +#2407 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22676, #28979, #4170, #47652 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978783407700, 0.0006311001363628507000 ), + .UNSPECIFIED. ) ; +#2409 = ORIENTED_EDGE ( 'NONE', *, *, #63471, .F. ) ; +#2410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2412 = EDGE_CURVE ( 'NONE', #561, #71478, #68041, .T. ) ; +#2413 = VERTEX_POINT ( 'NONE', #79477 ) ; +#2414 = ORIENTED_EDGE ( 'NONE', *, *, #17355, .T. ) ; +#2415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2416 = FACE_OUTER_BOUND ( 'NONE', #9832, .T. ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 50.83333333333335000, -4.152999154772353500 ) ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 37.62623792124938400, -28.70555803802995200 ) ) ; +#2419 = PLANE ( 'NONE', #35786 ) ; +#2420 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65547, #52984, #9760, #53264 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258794292500E-007, 0.0004559721492007902000 ), + .UNSPECIFIED. ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( 4.495380155487830900E-014, 63.42856308690588200, -28.36981695106784700 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#2423 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 35.04999999999999700, -28.20555803802995200 ) ) ; +#2424 = EDGE_CURVE ( 'NONE', #12367, #76954, #53436, .T. ) ; +#2425 = FACE_OUTER_BOUND ( 'NONE', #75293, .T. ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#2427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052158100, 81.31766786975353500, -28.25051428653848300 ) ) ; +#2429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868603500, 60.01994747561620600, -28.24986299608853800 ) ) ; +#2432 = ORIENTED_EDGE ( 'NONE', *, *, #79929, .T. ) ; +#2433 = CIRCLE ( 'NONE', #79172, 10.50000000000009900 ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( 15.46693852783924900, 75.79999999999982700, -28.37297418064025200 ) ) ; +#2435 = AXIS2_PLACEMENT_3D ( 'NONE', #7647, #13941, #44888 ) ; +#2436 = EDGE_CURVE ( 'NONE', #14568, #40802, #51438, .T. ) ; +#2437 = ORIENTED_EDGE ( 'NONE', *, *, #78491, .T. ) ; +#2438 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55196, #11711, #17953, #61493 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917649847500E-007, 0.0004089036991175620800 ), + .UNSPECIFIED. ) ; +#2439 = EDGE_CURVE ( 'NONE', #35283, #28268, #21004, .T. ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466676400, 38.80869142985028500, -28.37223374938522700 ) ) ; +#2441 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284944500, 9.820334718100493600, -28.30868034705250100 ) ) ; +#2442 = CONICAL_SURFACE ( 'NONE', #20829, 10.50000000000009900, 0.7853981633974518300 ) ; +#2443 = AXIS2_PLACEMENT_3D ( 'NONE', #79938, #19356, #21959 ) ; +#2444 = CONICAL_SURFACE ( 'NONE', #55394, 10.50000000000009400, 0.7853981633974500600 ) ; +#2445 = ORIENTED_EDGE ( 'NONE', *, *, #40116, .F. ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 54.33333333333334300, -5.205558038030008400 ) ) ; +#2447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#2449 = CIRCLE ( 'NONE', #8811, 10.00000000000009200 ) ; +#2450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2451 = ORIENTED_EDGE ( 'NONE', *, *, #4253, .T. ) ; +#2452 = ORIENTED_EDGE ( 'NONE', *, *, #70645, .F. ) ; +#2453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2454 = ADVANCED_FACE ( 'NONE', ( #49494 ), #64168, .F. ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( -5.187573541065947100, 44.56004727715419700, 5.036999288628599900 ) ) ; +#2456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2457 = AXIS2_PLACEMENT_3D ( 'NONE', #9527, #71560, #59314 ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 12.29416214178219300, 45.54999999999999700, -28.37136602294610200 ) ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#2460 = EDGE_CURVE ( 'NONE', #25931, #58643, #6518, .T. ) ; +#2461 = CONICAL_SURFACE ( 'NONE', #57174, 10.00000000000009400, 0.7853981633974447300 ) ; +#2462 = EDGE_CURVE ( 'NONE', #73569, #65079, #80688, .T. ) ; +#2464 = CONICAL_SURFACE ( 'NONE', #74244, 10.50000000000009900, 0.7853981633974518300 ) ; +#2463 = AXIS2_PLACEMENT_3D ( 'NONE', #18430, #12181, #30948 ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #40834, .F. ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#2467 = EDGE_LOOP ( 'NONE', ( #3729, #14021, #55288 ) ) ; +#2468 = ADVANCED_FACE ( 'NONE', ( #16458 ), #14494, .T. ) ; +#2469 = ORIENTED_EDGE ( 'NONE', *, *, #66241, .T. ) ; +#2470 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873280300, 79.89196326503821400, -28.29033182162383000 ) ) ; +#2471 = ORIENTED_EDGE ( 'NONE', *, *, #37560, .T. ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 57.92318720225497900, -28.70555803802997700 ) ) ; +#2474 = ADVANCED_FACE ( 'NONE', ( #20360 ), #62196, .T. ) ; +#2473 = ORIENTED_EDGE ( 'NONE', *, *, #55321, .T. ) ; +#2475 = EDGE_CURVE ( 'NONE', #59550, #4291, #78758, .T. ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 19.50000000000001800, 4.650848422521016300 ) ) ; +#2477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2478 = FACE_OUTER_BOUND ( 'NONE', #56877, .T. ) ; +#2479 = ORIENTED_EDGE ( 'NONE', *, *, #64458, .T. ) ; +#2480 = AXIS2_PLACEMENT_3D ( 'NONE', #46978, #53262, #16017 ) ; +#2481 = ADVANCED_FACE ( 'NONE', ( #31054 ), #49221, .T. ) ; +#2482 = FACE_OUTER_BOUND ( 'NONE', #49434, .T. ) ; +#2483 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543000, 39.99920551340398600, -28.70555803802995200 ) ) ; +#2484 = EDGE_LOOP ( 'NONE', ( #63403, #75400, #52540, #50512, #6911 ) ) ; +#2485 = CIRCLE ( 'NONE', #73631, 10.00000000000009200 ) ; +#2486 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#2487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416089500, 30.51125751638928200, -28.53740755999535500 ) ) ; +#2489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 63.00000000000000000, -9.205558038030005700 ) ) ; +#2491 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76132, #32631, #14143, #57639 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925639859800E-007, 0.0004431156063177162500 ), + .UNSPECIFIED. ) ; +#2492 = AXIS2_PLACEMENT_3D ( 'NONE', #3964, #72269, #28783 ) ; +#2493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2494 = CONICAL_SURFACE ( 'NONE', #78796, 10.50000000000009600, 0.7853981633974500600 ) ; +#2495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2496 = FACE_OUTER_BOUND ( 'NONE', #23038, .T. ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701863500, 55.79999999999999000, -28.70555803802997700 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844493900, 85.79999999999998300, -28.20555803802997700 ) ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653751600, 80.20590598242372900, -28.39369363572359700 ) ) ; +#2500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2501 = ORIENTED_EDGE ( 'NONE', *, *, #16775, .T. ) ; +#2502 = CIRCLE ( 'NONE', #21266, 7.500000000000000000 ) ; +#2503 = AXIS2_PLACEMENT_3D ( 'NONE', #75010, #37716, #463 ) ; +#2504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38006, #25539, #44229, #7010 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401244300, 0.004682530427071011200 ), + .UNSPECIFIED. ) ; +#2505 = VERTEX_POINT ( 'NONE', #18253 ) ; +#2506 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511904600, 61.99560977511664100, -28.70555803802997700 ) ) ; +#2508 = EDGE_CURVE ( 'NONE', #13624, #36098, #69963, .T. ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( -19.41230740457209700, 5.587692595428898700, -27.79708998677374200 ) ) ; +#2510 = CIRCLE ( 'NONE', #63015, 9.500000000000095900 ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 8.116254736416765400, 35.04999999999997600, -28.53994725305375700 ) ) ; +#2512 = FACE_OUTER_BOUND ( 'NONE', #34027, .T. ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 25.33333333333334300, 3.124568980892187500 ) ) ; +#2514 = ORIENTED_EDGE ( 'NONE', *, *, #72667, .F. ) ; +#2515 = CARTESIAN_POINT ( 'NONE', ( 6.761800547196140900, 67.94142842854259400, -28.37229765499296600 ) ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 51.68929190448859900, -28.20555803803030800 ) ) ; +#2517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13372, #56859, #63131, #25876 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634609941800, 0.0004765929656968108900 ), + .UNSPECIFIED. ) ; +#2518 = ORIENTED_EDGE ( 'NONE', *, *, #30529, .T. ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#2521 = VERTEX_POINT ( 'NONE', #6012 ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 90.34267608797551900, -28.20555803803014400 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026327500, 24.55000000000000100, -28.70555803802994200 ) ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252817900, 49.63131911501876200, -28.51286550264511300 ) ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492454500, 31.52620220503759500, -28.70555803802995200 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999999700, -28.20555803802997700 ) ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 28.65930907398620100, -28.35186440610856500 ) ) ; +#2527 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3140, #77960, #40676, #3412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169388431287200E-007, 0.0008082646680354840800 ), + .UNSPECIFIED. ) ; +#2528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2529 = CONICAL_SURFACE ( 'NONE', #49632, 10.50000000000009600, 0.7853981633974500600 ) ; +#2530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2531 = ORIENTED_EDGE ( 'NONE', *, *, #64694, .F. ) ; +#2532 = EDGE_CURVE ( 'NONE', #6729, #59285, #72854, .T. ) ; +#2533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828104900, 60.46231468379673400, -28.37082013777818500 ) ) ; +#2535 = ORIENTED_EDGE ( 'NONE', *, *, #31768, .F. ) ; +#2536 = ORIENTED_EDGE ( 'NONE', *, *, #71555, .F. ) ; +#2537 = EDGE_CURVE ( 'NONE', #78678, #72149, #58378, .T. ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922493200, 61.50962196508507400, -28.29483400905883500 ) ) ; +#2539 = VERTEX_POINT ( 'NONE', #56036 ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922525200, 61.50962196508452000, -28.29483400905927900 ) ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180800000, 51.65075715145310700, -28.20555803802997700 ) ) ; +#2542 = CIRCLE ( 'NONE', #76112, 10.00000000000009200 ) ; +#2543 = CIRCLE ( 'NONE', #70739, 10.00000000000009600 ) ; +#2544 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526946600, 80.01262610361142400, -28.29936525552474100 ) ) ; +#2545 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2546 = ORIENTED_EDGE ( 'NONE', *, *, #46830, .T. ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( 2.497924978448516200, 90.99854748491394200, -28.70555803802997700 ) ) ; +#2548 = EDGE_CURVE ( 'NONE', #49239, #77015, #43865, .T. ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 74.37738371066734500, -28.70555803803030800 ) ) ; +#2550 = EDGE_CURVE ( 'NONE', #14529, #11576, #45588, .T. ) ; +#2551 = EDGE_LOOP ( 'NONE', ( #5691, #63669, #40687 ) ) ; +#2552 = FACE_OUTER_BOUND ( 'NONE', #41585, .T. ) ; +#2553 = AXIS2_PLACEMENT_3D ( 'NONE', #28720, #9899, #78462 ) ; +#2554 = EDGE_LOOP ( 'NONE', ( #62130, #27030, #532, #73070 ) ) ; +#2555 = ORIENTED_EDGE ( 'NONE', *, *, #67606, .F. ) ; +#2556 = CIRCLE ( 'NONE', #78287, 9.500000000000097700 ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#2558 = CONICAL_SURFACE ( 'NONE', #32438, 10.50000000000009600, 0.7853981633974500600 ) ; +#2559 = ADVANCED_FACE ( 'NONE', ( #47556 ), #43652, .F. ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 69.00000000000000000, -1.205558038030005300 ) ) ; +#2561 = AXIS2_PLACEMENT_3D ( 'NONE', #50563, #75355, #25874 ) ; +#2562 = EDGE_CURVE ( 'NONE', #16363, #36682, #29501, .T. ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( 7.778407824762828300, 57.14999999999999900, -3.075416779130120100 ) ) ; +#2565 = VERTEX_POINT ( 'NONE', #13085 ) ; +#2564 = EDGE_CURVE ( 'NONE', #39832, #20363, #14996, .T. ) ; +#2566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53737, #10244, #66279, #29053 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007365383014251194700, 0.0008826254138086576400 ), + .UNSPECIFIED. ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670957900, 38.44136558227940300, -28.48677465922827100 ) ) ; +#2568 = EDGE_CURVE ( 'NONE', #51526, #40983, #509, .T. ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, 26.44142842854296700, -28.20555803802994200 ) ) ; +#2570 = ADVANCED_FACE ( 'NONE', ( #76760 ), #10608, .T. ) ; +#2571 = AXIS2_PLACEMENT_3D ( 'NONE', #64299, #27024, #70505 ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686885200, 51.58005252438365300, -28.24986299608879700 ) ) ; +#2573 = AXIS2_PLACEMENT_3D ( 'NONE', #34112, #77617, #40349 ) ; +#2574 = FACE_OUTER_BOUND ( 'NONE', #52090, .T. ) ; +#2575 = ORIENTED_EDGE ( 'NONE', *, *, #24391, .F. ) ; +#2576 = CIRCLE ( 'NONE', #54543, 9.500000000000099500 ) ; +#2577 = AXIS2_PLACEMENT_3D ( 'NONE', #18571, #62101, #24833 ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( -5.533180123657666100, 75.79999999999999700, -28.37307693585060900 ) ) ; +#2579 = EDGE_CURVE ( 'NONE', #23088, #65965, #66866, .T. ) ; +#2580 = VERTEX_POINT ( 'NONE', #19591 ) ; +#2581 = FACE_OUTER_BOUND ( 'NONE', #31769, .T. ) ; +#2582 = AXIS2_PLACEMENT_3D ( 'NONE', #42538, #67316, #55052 ) ; +#2583 = AXIS2_PLACEMENT_3D ( 'NONE', #267, #25042, #37519 ) ; +#2584 = ORIENTED_EDGE ( 'NONE', *, *, #60417, .T. ) ; +#2585 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 71.43945992495532900, -28.34042301926885800 ) ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#2587 = ADVANCED_FACE ( 'NONE', ( #34968 ), #58271, .T. ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100677300, 28.12363993080087000, -28.38670679782166300 ) ) ; +#2589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 17.03177803894799100, 80.28233213024610400, -28.25051428653880600 ) ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719594100, 22.65857157145701000, -28.37229765499279600 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 40.33333333333334300, 4.294441961970000500 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#2594 = FACE_OUTER_BOUND ( 'NONE', #43000, .T. ) ; +#2595 = CONICAL_SURFACE ( 'NONE', #27195, 10.00000000000009200, 0.7853981633974447300 ) ; +#2596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2597 = VERTEX_POINT ( 'NONE', #32100 ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914546900, 51.82440674572707500, -28.45987523529580100 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 73.67681279774498600, -28.70555803802997700 ) ) ; +#2600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610911600, 71.10236277681498500, -28.32100408376066600 ) ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339071400, 51.46283204837340700, -28.48697406221673100 ) ) ; +#2603 = ORIENTED_EDGE ( 'NONE', *, *, #73734, .F. ) ; +#2604 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18461, #55696, #61996, #24712 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795603300 ), + .UNSPECIFIED. ) ; +#2605 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2606 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#2607 = FACE_OUTER_BOUND ( 'NONE', #52486, .T. ) ; +#2608 = AXIS2_PLACEMENT_3D ( 'NONE', #20323, #51016, #8051 ) ; +#2609 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2610 = ORIENTED_EDGE ( 'NONE', *, *, #9226, .F. ) ; +#2611 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 2.666666666666678500, -8.133761268305512700 ) ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819633000, 51.65075715145291500, -28.20555803803005900 ) ) ; +#2613 = ORIENTED_EDGE ( 'NONE', *, *, #43435, .T. ) ; +#2614 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 74.83849307182684600, -28.68631150211663100 ) ) ; +#2615 = ORIENTED_EDGE ( 'NONE', *, *, #77337, .F. ) ; +#2616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #560, #25888, #44573, #7347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735383879600E-007, 0.0009376786059871786800 ), + .UNSPECIFIED. ) ; +#2617 = VERTEX_POINT ( 'NONE', #69347 ) ; +#2618 = PLANE ( 'NONE', #24521 ) ; +#2619 = CIRCLE ( 'NONE', #1527, 9.499999999999964500 ) ; +#2620 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 61.46283204837325800, -28.48697406221693400 ) ) ; +#2621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2622 = ORIENTED_EDGE ( 'NONE', *, *, #19274, .T. ) ; +#2623 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#2624 = ORIENTED_EDGE ( 'NONE', *, *, #72412, .F. ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( -10.55075677198179700, 8.958478180218987700, -28.65366437610099800 ) ) ; +#2626 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701300, 34.11903418172681800, -28.69431509262337700 ) ) ; +#2627 = EDGE_CURVE ( 'NONE', #5741, #3340, #74833, .T. ) ; +#2628 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2629 = CONICAL_SURFACE ( 'NONE', #57542, 10.50000000000009600, 0.7853981633974500600 ) ; +#2630 = ORIENTED_EDGE ( 'NONE', *, *, #39622, .T. ) ; +#2631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2632 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528700, 24.54999999999997600, -28.20555803802994200 ) ) ; +#2633 = AXIS2_PLACEMENT_3D ( 'NONE', #68788, #62543, #6499 ) ; +#2634 = ORIENTED_EDGE ( 'NONE', *, *, #40809, .T. ) ; +#2635 = ORIENTED_EDGE ( 'NONE', *, *, #58622, .F. ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, 16.29444196196998400 ) ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174770700, 61.43945992495534400, -28.34042301926882200 ) ) ; +#2638 = FACE_OUTER_BOUND ( 'NONE', #23590, .T. ) ; +#2639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#2641 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805684700, 22.91427200762528200, -28.67630847257078800 ) ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868443600, 50.01513784120219700, -28.32821106612157500 ) ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537095800, 60.20590598242368700, -28.39369363572351500 ) ) ; +#2644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2645 = ORIENTED_EDGE ( 'NONE', *, *, #72552, .F. ) ; +#2646 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37540, #12573, #25353, #68851 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397645700, 0.001517194977238252000 ), + .UNSPECIFIED. ) ; +#2647 = ADVANCED_FACE ( 'NONE', ( #32985 ), #8616, .T. ) ; +#2648 = EDGE_CURVE ( 'NONE', #78760, #27817, #25194, .T. ) ; +#2649 = FACE_OUTER_BOUND ( 'NONE', #69861, .T. ) ; +#2651 = VERTEX_POINT ( 'NONE', #75878 ) ; +#2650 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 39.07141756547892400, -28.70555803802995200 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985147800, 46.50238095238093200, -28.70555803802996700 ) ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 12.00000000000000900, 9.794441961969996100 ) ) ; +#2654 = EDGE_CURVE ( 'NONE', #32242, #49730, #52346, .T. ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 89.81066373133502600, -28.53923937255172300 ) ) ; +#2656 = ADVANCED_FACE ( 'NONE', ( #29153 ), #39768, .T. ) ; +#2657 = CONICAL_SURFACE ( 'NONE', #1329, 10.00000000000009400, 0.7853981633974447300 ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 46.33333333333334300, -5.535685056952199400 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 44.44999999999999600, -18.70555803803000600 ) ) ; +#2660 = EDGE_CURVE ( 'NONE', #16279, #24198, #56313, .T. ) ; +#2661 = ORIENTED_EDGE ( 'NONE', *, *, #8501, .T. ) ; +#2662 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66725, #4424, #35710, #79237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716331600, 0.004080294652941822100 ), + .UNSPECIFIED. ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 11.33333333333334800, -8.133761268305512700 ) ) ; +#2664 = EDGE_CURVE ( 'NONE', #69491, #66426, #37904, .T. ) ; +#2665 = AXIS2_PLACEMENT_3D ( 'NONE', #48040, #10818, #4555 ) ; +#2666 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#2667 = CONICAL_SURFACE ( 'NONE', #9868, 10.50000000000009600, 0.7853981633974518300 ) ; +#2668 = ORIENTED_EDGE ( 'NONE', *, *, #51242, .F. ) ; +#2669 = EDGE_CURVE ( 'NONE', #67144, #71770, #12557, .T. ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 48.66666666666667100, 4.294441961969993400 ) ) ; +#2672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#2674 = EDGE_LOOP ( 'NONE', ( #59392, #68426, #30248 ) ) ; +#2675 = AXIS2_PLACEMENT_3D ( 'NONE', #39734, #2456, #45968 ) ; +#2676 = EDGE_CURVE ( 'NONE', #37317, #27571, #23480, .T. ) ; +#2677 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#2678 = EDGE_CURVE ( 'NONE', #2291, #42103, #8971, .T. ) ; +#2679 = EDGE_CURVE ( 'NONE', #18103, #76937, #75326, .T. ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 89.41684396980714700, -28.70555803802999500 ) ) ; +#2681 = ADVANCED_FACE ( 'NONE', ( #27159 ), #54369, .T. ) ; +#2682 = CIRCLE ( 'NONE', #50902, 10.50000000000009600 ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#2684 = CIRCLE ( 'NONE', #8892, 9.500000000000097700 ) ; +#2685 = VERTEX_POINT ( 'NONE', #58179 ) ; +#2686 = ORIENTED_EDGE ( 'NONE', *, *, #51407, .F. ) ; +#2687 = AXIS2_PLACEMENT_3D ( 'NONE', #35048, #78570, #41261 ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873542000, 32.67955320215948200, -28.64059091698903400 ) ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#2690 = ORIENTED_EDGE ( 'NONE', *, *, #61824, .T. ) ; +#2691 = ORIENTED_EDGE ( 'NONE', *, *, #18191, .T. ) ; +#2692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868712200, 20.08486215880183300, -28.32821106611848100 ) ) ; +#2694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37853, #6588, #25388, #589 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728439023718900E-007, 0.0007763347809200334400 ), + .UNSPECIFIED. ) ; +#2695 = VERTEX_POINT ( 'NONE', #14677 ) ; +#2696 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#2697 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2698 = EDGE_CURVE ( 'NONE', #25269, #25990, #60252, .T. ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#2700 = AXIS2_PLACEMENT_3D ( 'NONE', #69624, #32375, #75889 ) ; +#2701 = AXIS2_PLACEMENT_3D ( 'NONE', #2545, #46062, #8802 ) ; +#2702 = VERTEX_POINT ( 'NONE', #64479 ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900974900, 28.56267502090536700, -28.41043597897459000 ) ) ; +#2704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2705 = CONICAL_SURFACE ( 'NONE', #40210, 10.00000000000009200, 0.7853981633974447300 ) ; +#2706 = EDGE_LOOP ( 'NONE', ( #62163, #33630, #66601 ) ) ; +#2707 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 52.16666666666666400, 0.9380355014189834000 ) ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 33.39610994602603700, -28.37519436813182200 ) ) ; +#2709 = ORIENTED_EDGE ( 'NONE', *, *, #9883, .F. ) ; +#2710 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865855600, 49.91272737910569600, -28.28853693900644500 ) ) ; +#2711 = FACE_OUTER_BOUND ( 'NONE', #76119, .T. ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328911400, 10.23798719401671600, -28.29447340919118000 ) ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( -4.283176507098970000, 18.06267502090533800, -28.41043597897452600 ) ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 44.83333333333333600, 6.794441961969994300 ) ) ; +#2715 = AXIS2_PLACEMENT_3D ( 'NONE', #50860, #69649, #32402 ) ; +#2716 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180789400, 69.94924284854687400, -28.20555803802997700 ) ) ; +#2718 = ORIENTED_EDGE ( 'NONE', *, *, #19654, .T. ) ; +#2719 = AXIS2_PLACEMENT_3D ( 'NONE', #69544, #32290, #75796 ) ; +#2720 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 46.83333333333334300, -9.205558038030003900 ) ) ; +#2722 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ; +#2723 = EDGE_LOOP ( 'NONE', ( #349, #5167, #28146, #46573 ) ) ; +#2724 = EDGE_CURVE ( 'NONE', #49034, #16470, #60887, .T. ) ; +#2725 = PLANE ( 'NONE', #70658 ) ; +#2726 = AXIS2_PLACEMENT_3D ( 'NONE', #46802, #9557, #53071 ) ; +#2727 = ORIENTED_EDGE ( 'NONE', *, *, #29970, .F. ) ; +#2728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2729 = ORIENTED_EDGE ( 'NONE', *, *, #60712, .T. ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 17.33333333333333900, -5.205558038030008400 ) ) ; +#2731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2732 = AXIS2_PLACEMENT_3D ( 'NONE', #17948, #55192, #73989 ) ; +#2733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1492, #38726, #14018, #57538 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940576976800 ), + .UNSPECIFIED. ) ; +#2736 = ADVANCED_FACE ( 'NONE', ( #23243 ), #4725, .F. ) ; +#2737 = AXIS2_PLACEMENT_3D ( 'NONE', #43106, #18378, #61911 ) ; +#2738 = FACE_OUTER_BOUND ( 'NONE', #77904, .T. ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 74.83849307182666200, -28.68631150211663400 ) ) ; +#2740 = VERTEX_POINT ( 'NONE', #70960 ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466623300, 39.83106028708541400, -28.57333386111662300 ) ) ; +#2742 = ORIENTED_EDGE ( 'NONE', *, *, #6051, .F. ) ; +#2743 = ADVANCED_FACE ( 'NONE', ( #41713 ), #52391, .F. ) ; +#2744 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#2745 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2746 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2748 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 60.83333333333332900, 6.794441961969992500 ) ) ; +#2749 = FACE_OUTER_BOUND ( 'NONE', #70137, .T. ) ; +#2750 = VERTEX_POINT ( 'NONE', #46184 ) ; +#2751 = CIRCLE ( 'NONE', #65199, 10.00000000000009400 ) ; +#2752 = ORIENTED_EDGE ( 'NONE', *, *, #54289, .F. ) ; +#2753 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#2754 = VERTEX_POINT ( 'NONE', #52435 ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473790800, 17.73827450271187100, -28.47230003642364700 ) ) ; +#2756 = EDGE_CURVE ( 'NONE', #72160, #23233, #46349, .T. ) ; +#2757 = ORIENTED_EDGE ( 'NONE', *, *, #61608, .T. ) ; +#2758 = ADVANCED_FACE ( 'NONE', ( #6682 ), #19327, .F. ) ; +#2759 = FACE_OUTER_BOUND ( 'NONE', #74764, .T. ) ; +#2760 = EDGE_CURVE ( 'NONE', #12775, #8494, #31942, .T. ) ; +#2761 = EDGE_LOOP ( 'NONE', ( #22549, #14553, #49194, #64181 ) ) ; +#2762 = VERTEX_POINT ( 'NONE', #58987 ) ; +#2763 = ORIENTED_EDGE ( 'NONE', *, *, #50322, .F. ) ; +#2764 = ORIENTED_EDGE ( 'NONE', *, *, #14571, .F. ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540387000, 79.08026449164323400, -28.70555803803019400 ) ) ; +#2766 = ORIENTED_EDGE ( 'NONE', *, *, #12215, .T. ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#2768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2769 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948474000, 71.01872124563880100, -28.53757464917604700 ) ) ; +#2770 = EDGE_LOOP ( 'NONE', ( #20867, #34571, #14717, #77413, #47123, #55564 ) ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2772 = EDGE_CURVE ( 'NONE', #79130, #19349, #17500, .T. ) ; +#2773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2774 = ADVANCED_FACE ( 'NONE', ( #68973 ), #67027, .F. ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#2776 = ORIENTED_EDGE ( 'NONE', *, *, #65848, .F. ) ; +#2777 = CARTESIAN_POINT ( 'NONE', ( -15.47391100912210700, 9.052177981755773900, -28.66053837059378400 ) ) ; +#2778 = CONICAL_SURFACE ( 'NONE', #15687, 10.00000000000009200, 0.7853981633974447300 ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116428100, 20.39435118792235700, -28.41114655922299500 ) ) ; +#2780 = EDGE_LOOP ( 'NONE', ( #51645, #39700, #45097 ) ) ; +#2781 = EDGE_CURVE ( 'NONE', #55345, #19608, #2751, .T. ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 23.16666666666667100, -6.205558038030004800 ) ) ; +#2784 = EDGE_CURVE ( 'NONE', #26859, #35911, #70916, .T. ) ; +#2783 = ORIENTED_EDGE ( 'NONE', *, *, #39646, .F. ) ; +#2785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2786 = ORIENTED_EDGE ( 'NONE', *, *, #18216, .F. ) ; +#2787 = ORIENTED_EDGE ( 'NONE', *, *, #15915, .F. ) ; +#2788 = EDGE_LOOP ( 'NONE', ( #57749, #74275, #77010 ) ) ; +#2789 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348802300, 81.99560977511636400, -28.70555803803030800 ) ) ; +#2790 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30051, #61041, #42501, #5256 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721076400, 0.0008252574424209408400 ), + .UNSPECIFIED. ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( 3.040273598549602800, 28.72437813624630100, -28.30310527599299100 ) ) ; +#2793 = CIRCLE ( 'NONE', #17206, 10.00000000000009400 ) ; +#2794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2795 = ADVANCED_FACE ( 'NONE', ( #37806 ), #814, .F. ) ; +#2796 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 37.62623792124939100, -28.70555803802995200 ) ) ; +#2797 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2798 = AXIS2_PLACEMENT_3D ( 'NONE', #18188, #30976, #61992 ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2800 = EDGE_CURVE ( 'NONE', #73953, #45946, #3001, .T. ) ; +#2801 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000091500, 15.94142842854307000, -28.20555803802992800 ) ) ; +#2802 = EDGE_CURVE ( 'NONE', #8272, #65128, #69330, .T. ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571479500, 81.52858243452089900, -28.70555803803014400 ) ) ; +#2804 = EDGE_CURVE ( 'NONE', #10459, #36931, #54867, .T. ) ; +#2805 = ORIENTED_EDGE ( 'NONE', *, *, #45178, .T. ) ; +#2806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#2808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019283600, 64.79999999999999700, -28.70555803802997700 ) ) ; +#2810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2811 = AXIS2_PLACEMENT_3D ( 'NONE', #68992, #44189, #50447 ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2814 = CONICAL_SURFACE ( 'NONE', #24931, 10.50000000000009600, 0.7853981633974518300 ) ; +#2815 = ORIENTED_EDGE ( 'NONE', *, *, #47120, .T. ) ; +#2816 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#2817 = ORIENTED_EDGE ( 'NONE', *, *, #11190, .T. ) ; +#2818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2819 = ORIENTED_EDGE ( 'NONE', *, *, #61691, .T. ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#2821 = AXIS2_PLACEMENT_3D ( 'NONE', #37154, #55926, #18687 ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 79.94924284854670300, -28.20555803803047800 ) ) ; +#2823 = AXIS2_PLACEMENT_3D ( 'NONE', #45714, #51958, #20476 ) ; +#2824 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#2825 = AXIS2_PLACEMENT_3D ( 'NONE', #78474, #3916, #34949 ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#2827 = CIRCLE ( 'NONE', #915, 10.00000000000009200 ) ; +#2828 = CONICAL_SURFACE ( 'NONE', #52515, 10.50000000000009600, 0.7853981633974500600 ) ; +#2829 = ORIENTED_EDGE ( 'NONE', *, *, #20687, .F. ) ; +#2830 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042513600, 21.59027028261000700, -28.70555803802998100 ) ) ; +#2831 = ORIENTED_EDGE ( 'NONE', *, *, #69389, .F. ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 66.83333333333334300, -3.349151577478984600 ) ) ; +#2833 = AXIS2_PLACEMENT_3D ( 'NONE', #12467, #43445, #18716 ) ; +#2834 = EDGE_LOOP ( 'NONE', ( #73659, #18879, #54706, #42714 ) ) ; +#2835 = EDGE_CURVE ( 'NONE', #70920, #21332, #40396, .T. ) ; +#2836 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2837 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 20.46868088498121800, -28.51286550264509900 ) ) ; +#2838 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274460600, 39.30622828441264000, -28.24172590004348700 ) ) ; +#2839 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74114, #43059, #43329, #6088 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978158900E-007, 0.001076778502991151400 ), + .UNSPECIFIED. ) ; +#2840 = CONICAL_SURFACE ( 'NONE', #47700, 10.00000000000009200, 0.7853981633974447300 ) ; +#2841 = ORIENTED_EDGE ( 'NONE', *, *, #66595, .F. ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217503000, 51.43945992495501000, -28.34042301926905700 ) ) ; +#2843 = CONICAL_SURFACE ( 'NONE', #48934, 10.50000000000009600, 0.7853981633974500600 ) ; +#2844 = ORIENTED_EDGE ( 'NONE', *, *, #6483, .T. ) ; +#2845 = EDGE_LOOP ( 'NONE', ( #6800, #51063, #28858 ) ) ; +#2846 = EDGE_LOOP ( 'NONE', ( #37807, #56471, #67866, #22641 ) ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2849 = EDGE_CURVE ( 'NONE', #31837, #3423, #25974, .T. ) ; +#2848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2796, #9044, #52572, #15343 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577297500 ), + .UNSPECIFIED. ) ; +#2850 = FACE_OUTER_BOUND ( 'NONE', #27109, .T. ) ; +#2851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2852 = VERTEX_POINT ( 'NONE', #8468 ) ; +#2853 = ORIENTED_EDGE ( 'NONE', *, *, #4375, .T. ) ; +#2854 = ORIENTED_EDGE ( 'NONE', *, *, #22614, .F. ) ; +#2855 = ORIENTED_EDGE ( 'NONE', *, *, #21671, .F. ) ; +#2856 = ORIENTED_EDGE ( 'NONE', *, *, #62588, .T. ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428597800, 31.02858243452103400, -28.70555803802996700 ) ) ; +#2858 = ORIENTED_EDGE ( 'NONE', *, *, #35255, .F. ) ; +#2859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11681, #30452, #80195, #42916 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001043664170964462300 ), + .UNSPECIFIED. ) ; +#2860 = ORIENTED_EDGE ( 'NONE', *, *, #77266, .F. ) ; +#2861 = ADVANCED_FACE ( 'NONE', ( #33931 ), #48482, .T. ) ; +#2862 = VERTEX_POINT ( 'NONE', #21028 ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849301500, 30.82033471810043300, -28.30868034705251200 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492471800, 31.52620220503759500, -28.70555803802995200 ) ) ; +#2865 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099407000, 49.56267502090563700, -28.41043597897501600 ) ) ; +#2866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 38.16666666666668600, -4.152999154772358800 ) ) ; +#2868 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11595, #17585, #24104, #67612 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647685246400E-007, 0.0007596411030280918400 ), + .UNSPECIFIED. ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 53.67681279774444600, -28.70555803803047500 ) ) ; +#2870 = FACE_OUTER_BOUND ( 'NONE', #53065, .T. ) ; +#2871 = AXIS2_PLACEMENT_3D ( 'NONE', #67070, #29851, #73329 ) ; +#2873 = ORIENTED_EDGE ( 'NONE', *, *, #20631, .T. ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708540700, 85.80000000000167400, -28.63843632546335300 ) ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#2875 = VERTEX_POINT ( 'NONE', #27296 ) ; +#2876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2877 = ORIENTED_EDGE ( 'NONE', *, *, #30631, .T. ) ; +#2878 = ADVANCED_FACE ( 'NONE', ( #21295 ), #15438, .T. ) ; +#2879 = EDGE_LOOP ( 'NONE', ( #372, #16892, #60647, #3547 ) ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( 11.23083069465658900, 60.65007990305428400, -28.43638873268717000 ) ) ; +#2881 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2882 = ADVANCED_FACE ( 'NONE', ( #50425 ), #63134, .T. ) ; +#2883 = CIRCLE ( 'NONE', #5619, 9.500000000000097700 ) ; +#2884 = ORIENTED_EDGE ( 'NONE', *, *, #32474, .F. ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543300, 29.49920551340399300, -28.70555803802994200 ) ) ; +#2886 = AXIS2_PLACEMENT_3D ( 'NONE', #44193, #6965, #50450 ) ; +#2887 = VERTEX_POINT ( 'NONE', #15018 ) ; +#2888 = ADVANCED_FACE ( 'NONE', ( #72893 ), #30070, .T. ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( -10.97684032349357300, 20.51912043132477600, -28.30223257055572700 ) ) ; +#2890 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507544600, 42.02620220503759200, -28.70555803802996700 ) ) ; +#2892 = EDGE_CURVE ( 'NONE', #35675, #67598, #46528, .T. ) ; +#2893 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 0.5000000000000015500, 4.650848422521016300 ) ) ; +#2894 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 96.59999999999999400, 16.29444196196998700 ) ) ; +#2895 = FACE_OUTER_BOUND ( 'NONE', #32575, .T. ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655605600, 38.92298334620759400, -28.20555803802996000 ) ) ; +#2897 = ORIENTED_EDGE ( 'NONE', *, *, #47693, .T. ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 72.31032580520964400, -28.59353418718925600 ) ) ; +#2899 = ORIENTED_EDGE ( 'NONE', *, *, #43107, .T. ) ; +#2900 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811644100, 30.89435118792235400, -28.41114655922301000 ) ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( -9.421266769480766400, 92.13234779781939200, -28.70555803803002000 ) ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783879500, 49.66749699759768100, -28.23966044827354300 ) ) ; +#2903 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70397, #14379, #57899, #33145 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408056855600, 0.0006251342085551395800 ), + .UNSPECIFIED. ) ; +#2904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#2907 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#2909 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#2910 = EDGE_CURVE ( 'NONE', #6811, #22200, #11515, .T. ) ; +#2911 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2913 = EDGE_CURVE ( 'NONE', #9809, #25647, #77812, .T. ) ; +#2912 = CONICAL_SURFACE ( 'NONE', #17755, 10.50000000000009400, 0.7853981633974500600 ) ; +#2914 = CIRCLE ( 'NONE', #36328, 10.00000000000009200 ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#2916 = ORIENTED_EDGE ( 'NONE', *, *, #2922, .F. ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567153600, 20.24660241562189400, -28.20555803802994200 ) ) ; +#2918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2919 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#2920 = AXIS2_PLACEMENT_3D ( 'NONE', #15514, #3240, #34281 ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( -16.62238785434585600, 9.241760825250356200, -28.57307344119341900 ) ) ; +#2922 = EDGE_CURVE ( 'NONE', #19932, #16674, #65096, .T. ) ; +#2923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2924 = EDGE_CURVE ( 'NONE', #13896, #56323, #63371, .T. ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489637100, 18.15930907398619700, -28.35186440610855000 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( -15.82622038785832100, 85.79999999999998300, -28.34928911331533300 ) ) ; +#2927 = CONICAL_SURFACE ( 'NONE', #35716, 10.00000000000009200, 0.7853981633974447300 ) ; +#2929 = ORIENTED_EDGE ( 'NONE', *, *, #64103, .T. ) ; +#2928 = EDGE_CURVE ( 'NONE', #59068, #21357, #48859, .T. ) ; +#2930 = ORIENTED_EDGE ( 'NONE', *, *, #2314, .T. ) ; +#2931 = AXIS2_PLACEMENT_3D ( 'NONE', #8768, #52276, #15054 ) ; +#2932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609161200, 90.13716795162640900, -28.48697406221693000 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 9.833333333333342800, -12.20555803803000600 ) ) ; +#2936 = ORIENTED_EDGE ( 'NONE', *, *, #29312, .T. ) ; +#2937 = CIRCLE ( 'NONE', #44845, 10.00000000000009200 ) ; +#2938 = ORIENTED_EDGE ( 'NONE', *, *, #52711, .F. ) ; +#2939 = ORIENTED_EDGE ( 'NONE', *, *, #56071, .T. ) ; +#2940 = VERTEX_POINT ( 'NONE', #3295 ) ; +#2941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2942 = VERTEX_POINT ( 'NONE', #46807 ) ; +#2944 = ORIENTED_EDGE ( 'NONE', *, *, #1713, .F. ) ; +#2943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2945 = ORIENTED_EDGE ( 'NONE', *, *, #8397, .T. ) ; +#2946 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 44.16666666666668600, 3.794441961969996900 ) ) ; +#2947 = AXIS2_PLACEMENT_3D ( 'NONE', #42183, #73236, #72966 ) ; +#2948 = AXIS2_PLACEMENT_3D ( 'NONE', #26292, #69767, #32510 ) ; +#2949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2950 = CARTESIAN_POINT ( 'NONE', ( 2.785741443455744800, 70.07527064970076900, -28.39317435246151100 ) ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 9.166666666666678500, 6.794441961969992500 ) ) ; +#2952 = ORIENTED_EDGE ( 'NONE', *, *, #19552, .T. ) ; +#2953 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027363500, 69.37488905616132200, -28.55192314908444100 ) ) ; +#2954 = CONICAL_SURFACE ( 'NONE', #12484, 10.50000000000009600, 0.7853981633974500600 ) ; +#2955 = ORIENTED_EDGE ( 'NONE', *, *, #10095, .T. ) ; +#2956 = ORIENTED_EDGE ( 'NONE', *, *, #75836, .F. ) ; +#2957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2958 = ORIENTED_EDGE ( 'NONE', *, *, #48747, .F. ) ; +#2959 = ORIENTED_EDGE ( 'NONE', *, *, #25277, .T. ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 46.50000000000001400, -9.258116921287651700 ) ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#2962 = ORIENTED_EDGE ( 'NONE', *, *, #48149, .T. ) ; +#2963 = ORIENTED_EDGE ( 'NONE', *, *, #4965, .T. ) ; +#2964 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 70.10230989102910800, -28.61774594594330900 ) ) ; +#2965 = CONICAL_SURFACE ( 'NONE', #61867, 10.50000000000009600, 0.7853981633974482800 ) ; +#2966 = AXIS2_PLACEMENT_3D ( 'NONE', #29967, #73450, #67192 ) ; +#2967 = ORIENTED_EDGE ( 'NONE', *, *, #78984, .T. ) ; +#2968 = EDGE_CURVE ( 'NONE', #29736, #60512, #34440, .T. ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541606700, 50.08874248361072300, -28.53740755999536600 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#2971 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2972 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75818, #32318, #44770, #7534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.184273249254457200E-005, 0.0007677744771234510300 ), + .UNSPECIFIED. ) ; +#2973 = FACE_OUTER_BOUND ( 'NONE', #65716, .T. ) ; +#2974 = ORIENTED_EDGE ( 'NONE', *, *, #42723, .F. ) ; +#2975 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#2976 = AXIS2_PLACEMENT_3D ( 'NONE', #10547, #41539, #16809 ) ; +#2977 = ORIENTED_EDGE ( 'NONE', *, *, #71860, .F. ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263282900, 14.05000000000000600, -28.70555803802992800 ) ) ; +#2979 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671730300, 69.66414768974043200, -28.38420446581293200 ) ) ; +#2980 = ADVANCED_FACE ( 'NONE', ( #17397 ), #44551, .T. ) ; +#2981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2983 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16864, #10338, #23129, #66633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001511925583809384900, 0.002290256320676466300 ), + .UNSPECIFIED. ) ; +#2984 = ADVANCED_FACE ( 'NONE', ( #31984 ), #11553, .T. ) ; +#2985 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#2986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2987 = AXIS2_PLACEMENT_3D ( 'NONE', #30263, #61528, #42709 ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.00000000000000700, -1.205558038030005300 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 4.999999999999997300, 0.0000000000000000000 ) ) ; +#2990 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2991 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57336, #44778, #38814, #1566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278948696100, 0.001517194977238245500 ), + .UNSPECIFIED. ) ; +#2992 = ORIENTED_EDGE ( 'NONE', *, *, #43541, .F. ) ; +#2993 = VERTEX_POINT ( 'NONE', #9848 ) ; +#2994 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2995 = VERTEX_POINT ( 'NONE', #53354 ) ; +#2996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2997 = AXIS2_PLACEMENT_3D ( 'NONE', #73780, #36481, #80024 ) ; +#2998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2999 = CARTESIAN_POINT ( 'NONE', ( -16.57127784838931100, 70.12774695439682700, -28.53061079109372100 ) ) ; +#3000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3001 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7949, #14225, #57732, #20488 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.314184547378653900E-017, 0.002676326193402774400 ), + .UNSPECIFIED. ) ; +#3002 = ADVANCED_FACE ( 'NONE', ( #35887 ), #59215, .F. ) ; +#3003 = CONICAL_SURFACE ( 'NONE', #2798, 10.00000000000009200, 0.7853981633974447300 ) ; +#3004 = VERTEX_POINT ( 'NONE', #65894 ) ; +#3005 = VERTEX_POINT ( 'NONE', #28660 ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 49.00000000000000700, 6.794441961969995200 ) ) ; +#3007 = CONICAL_SURFACE ( 'NONE', #76105, 10.50000000000009600, 0.7853981633974500600 ) ; +#3008 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.66749699759768100, -28.20555803802996700 ) ) ; +#3009 = VERTEX_POINT ( 'NONE', #72153 ) ; +#3010 = ORIENTED_EDGE ( 'NONE', *, *, #50945, .T. ) ; +#3011 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454033500, 82.51973550835639100, -28.70555803803023000 ) ) ; +#3012 = ORIENTED_EDGE ( 'NONE', *, *, #64208, .T. ) ; +#3013 = ORIENTED_EDGE ( 'NONE', *, *, #4046, .F. ) ; +#3014 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 15.16666666666667300, 0.9380355014189834000 ) ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 18.27975338134666600, 93.23920069267616400, -28.16837391002739800 ) ) ; +#3016 = CIRCLE ( 'NONE', #3070, 5.000000000000000900 ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3019 = CONICAL_SURFACE ( 'NONE', #12970, 10.00000000000009200, 0.7853981633974447300 ) ; +#3020 = ORIENTED_EDGE ( 'NONE', *, *, #72669, .F. ) ; +#3021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3022 = ORIENTED_EDGE ( 'NONE', *, *, #36977, .F. ) ; +#3023 = EDGE_CURVE ( 'NONE', #35406, #80236, #13507, .T. ) ; +#3024 = EDGE_LOOP ( 'NONE', ( #36071, #63182, #76489, #41037 ) ) ; +#3025 = ORIENTED_EDGE ( 'NONE', *, *, #65313, .T. ) ; +#3026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3027 = ORIENTED_EDGE ( 'NONE', *, *, #69967, .F. ) ; +#3028 = CONICAL_SURFACE ( 'NONE', #79034, 10.50000000000009800, 0.7853981633974518300 ) ; +#3029 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 18.50000000000002100, -4.865812075874393000 ) ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686886800, 81.58005252438356100, -28.24986299608881900 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148349900, 23.59761904761936800, -28.70555803802994200 ) ) ; +#3032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39437, #76704, #8418, #51918 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374279288300, 0.0005468822770174718400 ), + .UNSPECIFIED. ) ; +#3033 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3034 = CARTESIAN_POINT ( 'NONE', ( -17.14651939117049700, 62.51488052429279900, -28.47263588290807600 ) ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 58.66666666666667100, -8.133761268305512700 ) ) ; +#3036 = EDGE_CURVE ( 'NONE', #31168, #59944, #19976, .T. ) ; +#3037 = AXIS2_PLACEMENT_3D ( 'NONE', #70110, #32859, #76376 ) ; +#3038 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3039 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3040 = CONICAL_SURFACE ( 'NONE', #69595, 10.00000000000009600, 0.7853981633974482800 ) ; +#3041 = EDGE_LOOP ( 'NONE', ( #46784, #55837, #1080, #54581 ) ) ; +#3042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3043 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 32.70037755566824000, -28.53664883431609000 ) ) ; +#3044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3047 = CARTESIAN_POINT ( 'NONE', ( 18.01268492843964000, 70.30637265398597400, -28.24165217761365200 ) ) ; +#3048 = AXIS2_PLACEMENT_3D ( 'NONE', #12039, #55536, #18286 ) ; +#3049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3050 = EDGE_CURVE ( 'NONE', #76092, #55596, #77709, .T. ) ; +#3051 = EDGE_CURVE ( 'NONE', #5676, #24597, #79670, .T. ) ; +#3052 = ADVANCED_FACE ( 'NONE', ( #75755 ), #36242, .T. ) ; +#3053 = AXIS2_PLACEMENT_3D ( 'NONE', #36145, #23636, #29927 ) ; +#3054 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 90.69966441803890700, -28.70555803802997700 ) ) ; +#3055 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 21.00000000000000700, 3.794441961969998300 ) ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567159000, 39.35339758437810100, -28.20555803802995200 ) ) ; +#3057 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#3058 = ORIENTED_EDGE ( 'NONE', *, *, #11533, .T. ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#3061 = ORIENTED_EDGE ( 'NONE', *, *, #60891, .T. ) ; +#3062 = AXIS2_PLACEMENT_3D ( 'NONE', #33141, #20910, #45881 ) ; +#3063 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.43250300240228500, -28.20555803802997700 ) ) ; +#3064 = VERTEX_POINT ( 'NONE', #80030 ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 4.230811753656742400, 50.94994472024604400, -28.43636979168680800 ) ) ; +#3066 = EDGE_CURVE ( 'NONE', #70876, #50356, #5513, .T. ) ; +#3067 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707779400, 41.66410593583297100, -28.68054222049973500 ) ) ; +#3068 = ADVANCED_FACE ( 'NONE', ( #9567 ), #55256, .T. ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527470900, 14.36071428647299800, -28.36868303842826200 ) ) ; +#3070 = AXIS2_PLACEMENT_3D ( 'NONE', #40429, #3147, #46659 ) ; +#3071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3072 = AXIS2_PLACEMENT_3D ( 'NONE', #54793, #61082, #11303 ) ; +#3073 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#3074 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#3075 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18667, #55905, #37393, #153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037045122313822500E-007, 0.0004669856434892170500 ), + .UNSPECIFIED. ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 47.89962244433175400, -28.53664883431610400 ) ) ; +#3077 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701969200, 55.79999999999999700, -28.70555803803014400 ) ) ; +#3078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3079 = FACE_OUTER_BOUND ( 'NONE', #68573, .T. ) ; +#3080 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#3081 = ORIENTED_EDGE ( 'NONE', *, *, #68915, .T. ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548966500, 41.44069092601378700, -28.35186440610859300 ) ) ; +#3083 = EDGE_LOOP ( 'NONE', ( #14503, #50708, #73456 ) ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801553300, 70.69966441803863700, -28.70555803803030800 ) ) ; +#3085 = ORIENTED_EDGE ( 'NONE', *, *, #21533, .F. ) ; +#3086 = FACE_OUTER_BOUND ( 'NONE', #55124, .T. ) ; +#3087 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60857, #17323, #29883, #73361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001997561386689660000, 0.002090947444063674400 ), + .UNSPECIFIED. ) ; +#3088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3089 = ORIENTED_EDGE ( 'NONE', *, *, #34012, .T. ) ; +#3090 = AXIS2_PLACEMENT_3D ( 'NONE', #53641, #16117, #10137 ) ; +#3092 = VERTEX_POINT ( 'NONE', #18015 ) ; +#3091 = PLANE ( 'NONE', #20846 ) ; +#3093 = ORIENTED_EDGE ( 'NONE', *, *, #21035, .F. ) ; +#3094 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#3095 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3097 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3098 = CARTESIAN_POINT ( 'NONE', ( 3.125963764562886400, 9.632690823624754400, -28.36487527072565800 ) ) ; +#3099 = FACE_OUTER_BOUND ( 'NONE', #15919, .T. ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000044600, 70.16749699759752400, -28.20555803803030800 ) ) ; +#3101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3102 = ADVANCED_FACE ( 'NONE', ( #28109 ), #57268, .T. ) ; +#3103 = ORIENTED_EDGE ( 'NONE', *, *, #40009, .T. ) ; +#3104 = AXIS2_PLACEMENT_3D ( 'NONE', #38491, #1259, #44737 ) ; +#3105 = CONICAL_SURFACE ( 'NONE', #25957, 10.50000000000009600, 0.7853981633974500600 ) ; +#3106 = ORIENTED_EDGE ( 'NONE', *, *, #47636, .F. ) ; +#3107 = ORIENTED_EDGE ( 'NONE', *, *, #76195, .F. ) ; +#3108 = ORIENTED_EDGE ( 'NONE', *, *, #71588, .T. ) ; +#3109 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195753700, 48.50972971738993800, -28.70555803802997000 ) ) ; +#3110 = CIRCLE ( 'NONE', #63801, 9.500000000000099500 ) ; +#3111 = EDGE_LOOP ( 'NONE', ( #44194, #75608, #46247, #41114 ) ) ; +#3112 = CONICAL_SURFACE ( 'NONE', #54459, 10.00000000000009400, 0.7853981633974447300 ) ; +#3113 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 64.66666666666667100, 2.794441961969992100 ) ) ; +#3114 = AXIS2_PLACEMENT_3D ( 'NONE', #21521, #65046, #27780 ) ; +#3115 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3117 = EDGE_CURVE ( 'NONE', #73531, #62167, #71844, .T. ) ; +#3118 = AXIS2_PLACEMENT_3D ( 'NONE', #40883, #59672, #53395 ) ; +#3119 = CONICAL_SURFACE ( 'NONE', #61774, 10.00000000000009200, 0.7853981633974447300 ) ; +#3120 = ORIENTED_EDGE ( 'NONE', *, *, #37702, .T. ) ; +#3121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( 7.778407824762828300, 57.14999999999999900, -3.075416779130120100 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 85.47903320442299000, -28.36604143581847700 ) ) ; +#3125 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76897, #33375, #45853, #8598 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605052315800, 0.004414112765716430800 ), + .UNSPECIFIED. ) ; +#3126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3128 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 35.99999999999999300, -1.205558038030002800 ) ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#3131 = CARTESIAN_POINT ( 'NONE', ( 18.01268492843976800, 18.30637265398598100, -28.24165217761360900 ) ) ; +#3132 = EDGE_CURVE ( 'NONE', #61206, #7719, #57361, .T. ) ; +#3133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3134 = EDGE_CURVE ( 'NONE', #40181, #30245, #26147, .T. ) ; +#3135 = ORIENTED_EDGE ( 'NONE', *, *, #43637, .T. ) ; +#3136 = CARTESIAN_POINT ( 'NONE', ( -16.19858693502878200, 94.72249899919930300, -28.20555803802997700 ) ) ; +#3137 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.25489551879204000, -28.37193179497697000 ) ) ; +#3138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3139 = PLANE ( 'NONE', #71654 ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349243000, 18.70543520232814000, -28.70555803803009500 ) ) ; +#3142 = VERTEX_POINT ( 'NONE', #18283 ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 89.28967419478897200, -28.59353418718932400 ) ) ; +#3143 = EDGE_CURVE ( 'NONE', #52560, #53532, #42882, .T. ) ; +#3144 = ADVANCED_FACE ( 'NONE', ( #73826 ), #55301, .F. ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 15.84505829114529400, 93.29011658230510300, -28.59787178215206200 ) ) ; +#3146 = EDGE_CURVE ( 'NONE', #43565, #34824, #28485, .T. ) ; +#3147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3148 = CONICAL_SURFACE ( 'NONE', #55350, 10.00000000000009400, 0.7853981633974447300 ) ; +#3149 = ORIENTED_EDGE ( 'NONE', *, *, #77027, .T. ) ; +#3150 = AXIS2_PLACEMENT_3D ( 'NONE', #51961, #2214, #58258 ) ; +#3151 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#3152 = CIRCLE ( 'NONE', #67556, 9.500000000000099500 ) ; +#3153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3154 = EDGE_LOOP ( 'NONE', ( #29362, #9584, #67558, #60080 ) ) ; +#3155 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, -1.666666666666663400, -5.205558038030008400 ) ) ; +#3156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465800, 20.49769010897087200, -28.61774594594332300 ) ) ; +#3158 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3159 = CIRCLE ( 'NONE', #29391, 10.00000000000009200 ) ; +#3160 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37651, #31449, #12689, #43901 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460908845593100E-007, 0.0008482521192571711600 ), + .UNSPECIFIED. ) ; +#3161 = ORIENTED_EDGE ( 'NONE', *, *, #15007, .F. ) ; +#3162 = ORIENTED_EDGE ( 'NONE', *, *, #29195, .F. ) ; +#3163 = ADVANCED_FACE ( 'NONE', ( #7599 ), #22228, .F. ) ; +#3164 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#3165 = AXIS2_PLACEMENT_3D ( 'NONE', #4423, #47913, #10695 ) ; +#3166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3167 = CIRCLE ( 'NONE', #68148, 10.00000000000009200 ) ; +#3168 = EDGE_CURVE ( 'NONE', #19948, #31487, #13987, .T. ) ; +#3169 = EDGE_CURVE ( 'NONE', #44027, #35216, #80305, .T. ) ; +#3170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3171 = EDGE_CURVE ( 'NONE', #20096, #34665, #38729, .T. ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#3173 = ORIENTED_EDGE ( 'NONE', *, *, #80493, .T. ) ; +#3174 = PLANE ( 'NONE', #61267 ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#3176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3177 = FACE_OUTER_BOUND ( 'NONE', #1827, .T. ) ; +#3178 = AXIS2_PLACEMENT_3D ( 'NONE', #62378, #6345, #31379 ) ; +#3179 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274723600, 45.86787096422367000, -28.37244029424740800 ) ) ; +#3180 = ORIENTED_EDGE ( 'NONE', *, *, #23948, .F. ) ; +#3181 = ADVANCED_FACE ( 'NONE', ( #61196 ), #53362, .F. ) ; +#3182 = ORIENTED_EDGE ( 'NONE', *, *, #8257, .F. ) ; +#3183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75205, #50404, #69219, #31965 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170519724200, 0.004414519045339624800 ), + .UNSPECIFIED. ) ; +#3184 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3185 = ORIENTED_EDGE ( 'NONE', *, *, #53911, .F. ) ; +#3186 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348813400, 81.99560977511662000, -28.70555803802997700 ) ) ; +#3187 = CIRCLE ( 'NONE', #60109, 9.500000000000099500 ) ; +#3188 = ORIENTED_EDGE ( 'NONE', *, *, #36874, .T. ) ; +#3189 = EDGE_CURVE ( 'NONE', #59548, #11187, #65859, .T. ) ; +#3190 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819378900, 81.65075715145303500, -28.20555803802997700 ) ) ; +#3191 = CIRCLE ( 'NONE', #15865, 10.00000000000009600 ) ; +#3192 = AXIS2_PLACEMENT_3D ( 'NONE', #13254, #44455, #708 ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#3194 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567142500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050736700, 28.07379779496234900, -28.70555803802994200 ) ) ; +#3196 = ADVANCED_FACE ( 'NONE', ( #24194 ), #40705, .T. ) ; +#3197 = VERTEX_POINT ( 'NONE', #830 ) ; +#3198 = ORIENTED_EDGE ( 'NONE', *, *, #4339, .F. ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 90.16054007504463600, -28.34042301926880800 ) ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 77.94142842854310500, -28.20555803802997700 ) ) ; +#3201 = CIRCLE ( 'NONE', #2268, 10.00000000000009400 ) ; +#3202 = ORIENTED_EDGE ( 'NONE', *, *, #44883, .F. ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 7.666666666666681200, 8.320721403598824400 ) ) ; +#3204 = CIRCLE ( 'NONE', #31567, 10.00000000000009200 ) ; +#3205 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 42.00000000000001400, -6.205558038030003100 ) ) ; +#3208 = AXIS2_PLACEMENT_3D ( 'NONE', #43898, #6660, #50153 ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3210 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3211 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70270, #26790, #64338, #27060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537445935834000E-007, 0.0002745498510224157500 ), + .UNSPECIFIED. ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 7.000000000000006200, -9.205558038030005700 ) ) ; +#3213 = AXIS2_PLACEMENT_3D ( 'NONE', #30209, #11426, #60932 ) ; +#3214 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 60.90050506338821600, -28.70555803802997700 ) ) ; +#3215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3216 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#3217 = EDGE_CURVE ( 'NONE', #48563, #55015, #51326, .T. ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 44.33333333333334300, 8.320721403598817300 ) ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#3220 = AXIS2_PLACEMENT_3D ( 'NONE', #62769, #12997, #19223 ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3222 = ORIENTED_EDGE ( 'NONE', *, *, #10916, .T. ) ; +#3223 = AXIS2_PLACEMENT_3D ( 'NONE', #27865, #71357, #34093 ) ; +#3224 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 38.63176086632795100, -28.70555803802995200 ) ) ; +#3225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#3227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3229 = FACE_OUTER_BOUND ( 'NONE', #21387, .T. ) ; +#3230 = ORIENTED_EDGE ( 'NONE', *, *, #17706, .T. ) ; +#3231 = CIRCLE ( 'NONE', #47145, 10.50000000000009600 ) ; +#3232 = ORIENTED_EDGE ( 'NONE', *, *, #29891, .T. ) ; +#3233 = ORIENTED_EDGE ( 'NONE', *, *, #43869, .F. ) ; +#3234 = CONICAL_SURFACE ( 'NONE', #64759, 10.50000000000009600, 0.7853981633974500600 ) ; +#3235 = ORIENTED_EDGE ( 'NONE', *, *, #16500, .T. ) ; +#3236 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3238 = ORIENTED_EDGE ( 'NONE', *, *, #31680, .T. ) ; +#3239 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875016000, 56.46717019299481400, -28.53914313452737900 ) ) ; +#3242 = VERTEX_POINT ( 'NONE', #25884 ) ; +#3243 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#3244 = CIRCLE ( 'NONE', #3416, 10.00000000000009200 ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484970800, 62.31032580520965100, -28.59353418718926000 ) ) ; +#3246 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#3247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3248 = ORIENTED_EDGE ( 'NONE', *, *, #60492, .T. ) ; +#3249 = CIRCLE ( 'NONE', #26916, 10.50000000000009600 ) ; +#3250 = EDGE_CURVE ( 'NONE', #41614, #55015, #36894, .T. ) ; +#3251 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 47.83333333333332100, -3.349151577478984600 ) ) ; +#3252 = ORIENTED_EDGE ( 'NONE', *, *, #37702, .F. ) ; +#3253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3254 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385086600, 41.60677350908850500, -28.30799595738894000 ) ) ; +#3256 = EDGE_CURVE ( 'NONE', #31156, #42618, #22453, .T. ) ; +#3255 = ORIENTED_EDGE ( 'NONE', *, *, #17131, .F. ) ; +#3257 = ORIENTED_EDGE ( 'NONE', *, *, #67382, .F. ) ; +#3258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3259 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43315, #80593, #70, #43569 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003299945329125943300, 0.001108409907889992900 ), + .UNSPECIFIED. ) ; +#3260 = VERTEX_POINT ( 'NONE', #69635 ) ; +#3261 = CIRCLE ( 'NONE', #55411, 10.50000000000009900 ) ; +#3262 = ADVANCED_FACE ( 'NONE', ( #71882 ), #67962, .F. ) ; +#3263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3264 = EDGE_CURVE ( 'NONE', #61277, #7245, #7965, .T. ) ; +#3265 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#3266 = ORIENTED_EDGE ( 'NONE', *, *, #27015, .T. ) ; +#3267 = ORIENTED_EDGE ( 'NONE', *, *, #9930, .F. ) ; +#3268 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 41.44069092601377900, -28.35186440610859600 ) ) ; +#3269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3270 = EDGE_CURVE ( 'NONE', #68879, #79766, #74339, .T. ) ; +#3271 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 51.16666666666666400, -9.205558038030003900 ) ) ; +#3272 = EDGE_CURVE ( 'NONE', #57450, #73209, #59877, .T. ) ; +#3273 = ORIENTED_EDGE ( 'NONE', *, *, #26794, .T. ) ; +#3274 = ADVANCED_FACE ( 'NONE', ( #3711 ), #34883, .F. ) ; +#3275 = CONICAL_SURFACE ( 'NONE', #79465, 10.00000000000009200, 0.7853981633974447300 ) ; +#3276 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3277 = ADVANCED_FACE ( 'NONE', ( #42653 ), #1754, .T. ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 13.00000000000001100, -1.205558038030005300 ) ) ; +#3279 = CARTESIAN_POINT ( 'NONE', ( 20.68989875273167600, 94.44495006316604700, -26.95248597501364400 ) ) ; +#3280 = AXIS2_PLACEMENT_3D ( 'NONE', #53121, #22133, #46847 ) ; +#3281 = EDGE_CURVE ( 'NONE', #8197, #21529, #18325, .T. ) ; +#3282 = CARTESIAN_POINT ( 'NONE', ( -3.757024425534403200, 80.16517473503391500, -28.29551658696701500 ) ) ; +#3283 = EDGE_CURVE ( 'NONE', #72923, #23878, #45344, .T. ) ; +#3284 = EDGE_CURVE ( 'NONE', #24516, #58909, #69896, .T. ) ; +#3285 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670955100, 31.65863441772058500, -28.48677465922828100 ) ) ; +#3286 = ADVANCED_FACE ( 'NONE', ( #20279 ), #16384, .T. ) ; +#3287 = AXIS2_PLACEMENT_3D ( 'NONE', #37655, #43906, #25463 ) ; +#3288 = FACE_OUTER_BOUND ( 'NONE', #27128, .T. ) ; +#3289 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#3290 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3291 = EDGE_LOOP ( 'NONE', ( #30881, #18734, #52404 ) ) ; +#3292 = AXIS2_PLACEMENT_3D ( 'NONE', #78113, #40851, #3571 ) ; +#3293 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 16.33333333333333600, 1.294441961969997200 ) ) ; +#3294 = AXIS2_PLACEMENT_3D ( 'NONE', #30126, #73622, #36341 ) ; +#3295 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147900, 51.52858243452072900, -28.70555803803030800 ) ) ; +#3296 = AXIS2_PLACEMENT_3D ( 'NONE', #56009, #18764, #62292 ) ; +#3297 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .F. ) ; +#3298 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27717, #2643, #33952, #77463 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386344251500, 0.0008131256040083887100 ), + .UNSPECIFIED. ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823694600, 10.90456253568403300, -28.61277292027076800 ) ) ; +#3300 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 56.50000000000002800, 4.650848422521016300 ) ) ; +#3302 = CIRCLE ( 'NONE', #47950, 9.500000000000099500 ) ; +#3303 = ORIENTED_EDGE ( 'NONE', *, *, #35004, .F. ) ; +#3304 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#3305 = CONICAL_SURFACE ( 'NONE', #14307, 10.00000000000009200, 0.7853981633974447300 ) ; +#3306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3307 = EDGE_LOOP ( 'NONE', ( #23328, #22345, #66658, #63944 ) ) ; +#3308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18036, #43294, #62099, #24831 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0007606633682817564000 ), + .UNSPECIFIED. ) ; +#3309 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#3310 = CIRCLE ( 'NONE', #56853, 10.00000000000009400 ) ; +#3311 = CONICAL_SURFACE ( 'NONE', #55958, 10.50000000000009600, 0.7853981633974500600 ) ; +#3312 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3313 = EDGE_LOOP ( 'NONE', ( #40924, #76615, #9581, #57576, #14586, #78041 ) ) ; +#3314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 83.67681279774510000, -28.70555803803030800 ) ) ; +#3316 = VERTEX_POINT ( 'NONE', #58203 ) ; +#3317 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29533, #4465, #35756, #79272 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005783220423748033600, 0.006247607834334027700 ), + .UNSPECIFIED. ) ; +#3318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3319 = EDGE_LOOP ( 'NONE', ( #74259, #52478, #74286, #53435 ) ) ; +#3320 = AXIS2_PLACEMENT_3D ( 'NONE', #66454, #29232, #72714 ) ; +#3321 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9332, #46577, #59118, #21873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286991308300E-007, 0.0007303759720891763100 ), + .UNSPECIFIED. ) ; +#3325 = CONICAL_SURFACE ( 'NONE', #8057, 10.50000000000009600, 0.7853981633974500600 ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390709100, 71.46283204837338600, -28.48697406221672800 ) ) ; +#3327 = ORIENTED_EDGE ( 'NONE', *, *, #52347, .F. ) ; +#3328 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3329 = FACE_OUTER_BOUND ( 'NONE', #3334, .T. ) ; +#3330 = ORIENTED_EDGE ( 'NONE', *, *, #50692, .T. ) ; +#3331 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.23796787468681700, -28.38801640354855500 ) ) ; +#3332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3333 = EDGE_CURVE ( 'NONE', #70596, #59962, #30939, .T. ) ; +#3334 = EDGE_LOOP ( 'NONE', ( #58952, #35585, #40350, #62055, #33959 ) ) ; +#3335 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3336 = ORIENTED_EDGE ( 'NONE', *, *, #540, .F. ) ; +#3337 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883555100, 20.39435118792235400, -28.41114655922299500 ) ) ; +#3338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3339 = AXIS2_PLACEMENT_3D ( 'NONE', #9243, #52773, #34024 ) ; +#3340 = VERTEX_POINT ( 'NONE', #76980 ) ; +#3341 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 77.94142842854297700, -28.37229765499282100 ) ) ; +#3342 = VERTEX_POINT ( 'NONE', #70712 ) ; +#3343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3345 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3346 = CONICAL_SURFACE ( 'NONE', #55887, 10.00000000000009600, 0.7853981633974482800 ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 1.621966450038314600E-013, 77.22261628933252100, -28.70555803802997700 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 48.12623792124938400, -28.70555803802996700 ) ) ; +#3349 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.44142842854296700, -28.20555803802994200 ) ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 16.45968132316361100, 65.17149633148089500, -28.60315268788647100 ) ) ; +#3351 = VERTEX_POINT ( 'NONE', #39706 ) ; +#3352 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537167900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#3353 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008000, 26.44142842854304100, -28.20555803802994200 ) ) ; +#3354 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3355 = AXIS2_PLACEMENT_3D ( 'NONE', #72260, #16492, #78521 ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( -9.813460021729275300, 6.877501000800537900, -28.20555803802992800 ) ) ; +#3357 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609196500, 34.41466791010192600, -28.53910738522643700 ) ) ; +#3358 = EDGE_LOOP ( 'NONE', ( #51906, #61460, #67230, #38662 ) ) ; +#3359 = CONICAL_SURFACE ( 'NONE', #15826, 10.50000000000009800, 0.7853981633974500600 ) ; +#3360 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155495500, 75.46616414991842700, -28.37247596307075200 ) ) ; +#3361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55513, #12006, #68031, #30783 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283329301300, 0.0007287255810282980100 ), + .UNSPECIFIED. ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 31.17701665379220800, -28.20555803802996000 ) ) ; +#3363 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853733700, 61.25732391202370800, -28.20555803803030800 ) ) ; +#3365 = AXIS2_PLACEMENT_3D ( 'NONE', #40854, #22363, #53080 ) ; +#3366 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3367 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35961, #48704, #67499, #30277 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964929700, 0.0005839769583133971100 ), + .UNSPECIFIED. ) ; +#3368 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3369 = EDGE_CURVE ( 'NONE', #55309, #47124, #32904, .T. ) ; +#3370 = CONICAL_SURFACE ( 'NONE', #45971, 10.00000000000009400, 0.7853981633974447300 ) ; +#3371 = ORIENTED_EDGE ( 'NONE', *, *, #5212, .F. ) ; +#3372 = ADVANCED_FACE ( 'NONE', ( #5675 ), #47472, .T. ) ; +#3373 = CONICAL_SURFACE ( 'NONE', #5159, 10.50000000000009600, 0.7853981633974482800 ) ; +#3374 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 62.50000000000001400, -7.061964498581016200 ) ) ; +#3375 = ORIENTED_EDGE ( 'NONE', *, *, #19933, .T. ) ; +#3376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3379 = EDGE_LOOP ( 'NONE', ( #64218, #56795, #78147 ) ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 90.79999999999950000, -28.70555803803047500 ) ) ; +#3380 = ADVANCED_FACE ( 'NONE', ( #51361 ), #14422, .T. ) ; +#3381 = FACE_OUTER_BOUND ( 'NONE', #79626, .T. ) ; +#3382 = CIRCLE ( 'NONE', #18940, 10.00000000000009400 ) ; +#3383 = EDGE_CURVE ( 'NONE', #80699, #12637, #30985, .T. ) ; +#3384 = ORIENTED_EDGE ( 'NONE', *, *, #20047, .F. ) ; +#3385 = EDGE_CURVE ( 'NONE', #47484, #22477, #16477, .T. ) ; +#3386 = CARTESIAN_POINT ( 'NONE', ( -17.37150777124396900, 81.43250300240228500, -28.25053031809458700 ) ) ; +#3387 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 56.66666666666668600, 2.794441961969994700 ) ) ; +#3388 = ORIENTED_EDGE ( 'NONE', *, *, #19482, .T. ) ; +#3389 = CONICAL_SURFACE ( 'NONE', #36465, 10.00000000000009200, 0.7853981633974447300 ) ; +#3390 = VERTEX_POINT ( 'NONE', #33996 ) ; +#3391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3392 = ORIENTED_EDGE ( 'NONE', *, *, #14851, .T. ) ; +#3393 = AXIS2_PLACEMENT_3D ( 'NONE', #18866, #62393, #25135 ) ; +#3394 = EDGE_CURVE ( 'NONE', #76184, #25749, #49426, .T. ) ; +#3395 = EDGE_CURVE ( 'NONE', #37057, #70456, #1974, .T. ) ; +#3396 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#3397 = EDGE_CURVE ( 'NONE', #14896, #50861, #68321, .T. ) ; +#3398 = ADVANCED_FACE ( 'NONE', ( #64087 ), #29072, .F. ) ; +#3399 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 33.83333333333333600, 1.741883078712340300 ) ) ; +#3400 = FACE_OUTER_BOUND ( 'NONE', #58962, .T. ) ; +#3401 = EDGE_CURVE ( 'NONE', #53679, #55474, #45514, .T. ) ; +#3402 = EDGE_LOOP ( 'NONE', ( #5122, #64050, #18949 ) ) ; +#3403 = AXIS2_PLACEMENT_3D ( 'NONE', #5681, #36169, #55443 ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( -15.05231272353723400, 85.84128927986392900, -28.70545447299020500 ) ) ; +#3405 = FACE_OUTER_BOUND ( 'NONE', #62226, .T. ) ; +#3406 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#3407 = ORIENTED_EDGE ( 'NONE', *, *, #60141, .F. ) ; +#3408 = VERTEX_POINT ( 'NONE', #9500 ) ; +#3409 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 60.69966441803886400, -28.70555803803014400 ) ) ; +#3410 = ORIENTED_EDGE ( 'NONE', *, *, #16737, .T. ) ; +#3411 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000162500, 78.62623792124919900, -28.70555803803030800 ) ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567306400, 18.35339758437789800, -28.20555803803009500 ) ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999994700, 17.41684396980717500, -28.70555803802997400 ) ) ; +#3414 = EDGE_LOOP ( 'NONE', ( #36736, #23655, #31476, #72880 ) ) ; +#3415 = FACE_OUTER_BOUND ( 'NONE', #46503, .T. ) ; +#3416 = AXIS2_PLACEMENT_3D ( 'NONE', #31493, #74993, #37696 ) ; +#3417 = ORIENTED_EDGE ( 'NONE', *, *, #5669, .T. ) ; +#3418 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715200, 20.24660241562189000, -28.20555803802994200 ) ) ; +#3419 = AXIS2_PLACEMENT_3D ( 'NONE', #73927, #74199, #67652 ) ; +#3420 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3421 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16487, #53729, #66266, #29036 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353369761500E-007, 0.0007670609591622666100 ), + .UNSPECIFIED. ) ; +#3422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3423 = VERTEX_POINT ( 'NONE', #65574 ) ; +#3424 = CIRCLE ( 'NONE', #7575, 10.00000000000009400 ) ; +#3425 = CARTESIAN_POINT ( 'NONE', ( -17.04027359854958900, 49.72437813624630800, -28.30310527599301600 ) ) ; +#3426 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#3427 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, -3.833333333333318800, 0.9380355014189834000 ) ) ; +#3428 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.16749699759768800, -28.20555803802997700 ) ) ; +#3429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3430 = ORIENTED_EDGE ( 'NONE', *, *, #4144, .F. ) ; +#3431 = CONICAL_SURFACE ( 'NONE', #80424, 10.50000000000009800, 0.7853981633974500600 ) ; +#3432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3433 = CARTESIAN_POINT ( 'NONE', ( -2.487410011451154800, 90.12140959736002800, -28.55996453402206800 ) ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3435 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169300, 61.25732391202397100, -28.20555803802997700 ) ) ; +#3436 = AXIS2_PLACEMENT_3D ( 'NONE', #58758, #15250, #71277 ) ; +#3437 = EDGE_CURVE ( 'NONE', #44569, #65965, #66030, .T. ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 16.93476732735788200, 32.64004081115111700, -28.51837550109416200 ) ) ; +#3439 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26226, #13721, #20217, #63753 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904268226900E-007, 0.0005865296644889288500 ), + .UNSPECIFIED. ) ; +#3440 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 76.76150692817330400, -28.68631150211663400 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.66749699759768100, -28.20555803802996700 ) ) ; +#3442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3444 = CONICAL_SURFACE ( 'NONE', #21484, 10.00000000000009200, 0.7853981633974447300 ) ; +#3445 = EDGE_CURVE ( 'NONE', #73286, #55373, #53866, .T. ) ; +#3446 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.43250300240195800, -28.20555803803030800 ) ) ; +#3447 = AXIS2_PLACEMENT_3D ( 'NONE', #38654, #1420, #44897 ) ; +#3448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3450 = ORIENTED_EDGE ( 'NONE', *, *, #29434, .T. ) ; +#3451 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3452 = FACE_OUTER_BOUND ( 'NONE', #50559, .T. ) ; +#3453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155515000, 85.79999999999967000, -28.20555803803030800 ) ) ; +#3456 = ORIENTED_EDGE ( 'NONE', *, *, #11893, .T. ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#3457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25474, #19199, #56453, #31726 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#3458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3459 = ADVANCED_FACE ( 'NONE', ( #36804 ), #76689, .T. ) ; +#3460 = FACE_OUTER_BOUND ( 'NONE', #33599, .T. ) ; +#3461 = CIRCLE ( 'NONE', #65345, 9.500000000000097700 ) ; +#3462 = ORIENTED_EDGE ( 'NONE', *, *, #12583, .T. ) ; +#3463 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#3464 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 5.499999999999999100, -9.258116921287651700 ) ) ; +#3465 = CONICAL_SURFACE ( 'NONE', #45257, 10.00000000000009200, 0.7853981633974415100 ) ; +#3466 = ORIENTED_EDGE ( 'NONE', *, *, #6142, .F. ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#3468 = ORIENTED_EDGE ( 'NONE', *, *, #61859, .F. ) ; +#3469 = ADVANCED_FACE ( 'NONE', ( #80601 ), #34828, .T. ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 39.83333333333335000, 3.794441961969996900 ) ) ; +#3471 = AXIS2_PLACEMENT_3D ( 'NONE', #52377, #15154, #58662 ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#3474 = CIRCLE ( 'NONE', #58715, 10.50000000000009600 ) ; +#3473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3475 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 4.833333333333352600, 6.794441961969992500 ) ) ; +#3476 = FACE_OUTER_BOUND ( 'NONE', #66225, .T. ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3478 = VERTEX_POINT ( 'NONE', #3779 ) ; +#3479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3480 = EDGE_CURVE ( 'NONE', #54633, #39956, #39380, .T. ) ; +#3481 = ORIENTED_EDGE ( 'NONE', *, *, #47523, .F. ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( 6.782388749737054700, 44.44999999999998900, 4.099845606353609300 ) ) ; +#3483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3484 = ORIENTED_EDGE ( 'NONE', *, *, #25405, .T. ) ; +#3485 = ORIENTED_EDGE ( 'NONE', *, *, #48402, .F. ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 42.16666666666667900, -12.20555803803000000 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#3488 = ORIENTED_EDGE ( 'NONE', *, *, #71933, .F. ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489637100, 18.15930907398619700, -28.35186440610855000 ) ) ; +#3490 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830877800, 20.64954451135939100, -28.33400579219036100 ) ) ; +#3491 = CIRCLE ( 'NONE', #66253, 9.500000000000097700 ) ; +#3492 = VECTOR ( 'NONE', #48777, 1000.000000000000000 ) ; +#3493 = ORIENTED_EDGE ( 'NONE', *, *, #3333, .F. ) ; +#3494 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567173200, 9.746602415621898900, -28.20555803802992800 ) ) ; +#3495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55442, #36686, #61741, #24463 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611718729667200E-007, 0.0002592600401777475000 ), + .UNSPECIFIED. ) ; +#3496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3497 = ADVANCED_FACE ( 'NONE', ( #62122 ), #78616, .T. ) ; +#3498 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416055800, 39.58874248361070900, -28.53740755999534800 ) ) ; +#3499 = EDGE_LOOP ( 'NONE', ( #62266, #12569, #18352 ) ) ; +#3500 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3501 = CONICAL_SURFACE ( 'NONE', #8059, 10.50000000000009900, 0.7853981633974518300 ) ; +#3502 = EDGE_CURVE ( 'NONE', #65615, #7748, #24943, .T. ) ; +#3503 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#3504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3505 = ORIENTED_EDGE ( 'NONE', *, *, #13331, .T. ) ; +#3506 = FACE_OUTER_BOUND ( 'NONE', #77710, .T. ) ; +#3507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3508 = EDGE_CURVE ( 'NONE', #39293, #34575, #10485, .T. ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466768300, 17.80869142985021400, -28.37223374938531300 ) ) ; +#3510 = CARTESIAN_POINT ( 'NONE', ( -17.07349692871593700, 81.37839075872577200, -28.29547734244345500 ) ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686891300, 60.01994747561645500, -28.24986299608865500 ) ) ; +#3512 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 78.17143691309408400, -28.36981695106780800 ) ) ; +#3513 = CARTESIAN_POINT ( 'NONE', ( -9.530136888809618500, 9.146957350529762100, -28.66910751791843400 ) ) ; +#3514 = EDGE_CURVE ( 'NONE', #21332, #67155, #12482, .T. ) ; +#3515 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274331600, 87.93535825203923700, -28.53896444442201400 ) ) ; +#3516 = EDGE_LOOP ( 'NONE', ( #69354, #45267, #38214, #9845 ) ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000700, 44.44999999999999600, -1.205558038030005700 ) ) ; +#3518 = EDGE_CURVE ( 'NONE', #40811, #61855, #76783, .T. ) ; +#3519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23265, #79043, #73048, #35777 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957488062000, 0.004414112765716555700 ), + .UNSPECIFIED. ) ; +#3520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3521 = AXIS2_PLACEMENT_3D ( 'NONE', #71369, #34105, #77613 ) ; +#3522 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 45.66666666666667100, 2.794441961969992100 ) ) ; +#3523 = FACE_OUTER_BOUND ( 'NONE', #77246, .T. ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.43250300240195800, -28.20555803803030800 ) ) ; +#3525 = EDGE_LOOP ( 'NONE', ( #53609, #29123, #16065, #47486, #23485, #12944, #5642, #74465 ) ) ; +#3526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3527 = CIRCLE ( 'NONE', #44602, 10.50000000000009600 ) ; +#3528 = EDGE_LOOP ( 'NONE', ( #80433, #35389, #35978 ) ) ; +#3529 = FACE_OUTER_BOUND ( 'NONE', #76606, .T. ) ; +#3530 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567180300, 9.746602415621831400, -28.20555803802992800 ) ) ; +#3531 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.65857157145661900, -28.20555803803030800 ) ) ; +#3533 = AXIS2_PLACEMENT_3D ( 'NONE', #28251, #71743, #34472 ) ; +#3534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3535 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10435, #22941, #41684, #4434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820737743600E-007, 0.0005869288236378063000 ), + .UNSPECIFIED. ) ; +#3536 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#3537 = ORIENTED_EDGE ( 'NONE', *, *, #38514, .F. ) ; +#3538 = EDGE_CURVE ( 'NONE', #78730, #22761, #60179, .T. ) ; +#3539 = EDGE_CURVE ( 'NONE', #53919, #50428, #27085, .T. ) ; +#3540 = AXIS2_PLACEMENT_3D ( 'NONE', #51726, #14517, #58028 ) ; +#3541 = CONICAL_SURFACE ( 'NONE', #45198, 10.00000000000009600, 0.7853981633974447300 ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( -3.976840323493581400, 41.51912043132477900, -28.30223257055574500 ) ) ; +#3543 = CONICAL_SURFACE ( 'NONE', #54801, 10.00000000000009200, 0.7853981633974447300 ) ; +#3544 = ORIENTED_EDGE ( 'NONE', *, *, #60066, .F. ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 53.33333333333334300, 5.722645192245503900 ) ) ; +#3546 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13533, #50734, #32271, #75782 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350749307300E-007, 0.0007670609591623666800 ), + .UNSPECIFIED. ) ; +#3547 = ORIENTED_EDGE ( 'NONE', *, *, #53195, .T. ) ; +#3548 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3549 = EDGE_CURVE ( 'NONE', #34605, #60076, #43578, .T. ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 10.83333333333335200, -3.349151577478984600 ) ) ; +#3551 = EDGE_LOOP ( 'NONE', ( #69165, #23095, #37971, #13955 ) ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 23.90834584317194700, 96.05391757410748700, -23.25817294839551500 ) ) ; +#3553 = AXIS2_PLACEMENT_3D ( 'NONE', #13131, #56611, #19352 ) ; +#3554 = AXIS2_PLACEMENT_3D ( 'NONE', #16493, #47443, #29044 ) ; +#3555 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66735, #41682, #10709, #29502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.001246264537621177800 ), + .UNSPECIFIED. ) ; +#3556 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3557 = ADVANCED_FACE ( 'NONE', ( #10528 ), #72815, .T. ) ; +#3558 = FACE_OUTER_BOUND ( 'NONE', #71163, .T. ) ; +#3559 = EDGE_LOOP ( 'NONE', ( #5950, #42863, #47401, #53376 ) ) ; +#3560 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 32.70037755566824700, -28.53664883431608600 ) ) ; +#3561 = ORIENTED_EDGE ( 'NONE', *, *, #25631, .T. ) ; +#3562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3563 = ORIENTED_EDGE ( 'NONE', *, *, #78240, .T. ) ; +#3564 = ORIENTED_EDGE ( 'NONE', *, *, #49710, .T. ) ; +#3565 = ORIENTED_EDGE ( 'NONE', *, *, #15202, .F. ) ; +#3566 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3567 = FACE_OUTER_BOUND ( 'NONE', #67327, .T. ) ; +#3568 = ADVANCED_FACE ( 'NONE', ( #74762 ), #39695, .T. ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 14.16666666666666600, -2.545304000185620600 ) ) ; +#3570 = VERTEX_POINT ( 'NONE', #60920 ) ; +#3571 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3572 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769036400, 50.28860447109612900, -28.53900456328628400 ) ) ; +#3573 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 65.79999999999998300, -28.20555803802997700 ) ) ; +#3574 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 54.33333333333334300, -5.205558038030008400 ) ) ; +#3575 = ORIENTED_EDGE ( 'NONE', *, *, #62493, .F. ) ; +#3576 = FACE_OUTER_BOUND ( 'NONE', #47579, .T. ) ; +#3577 = AXIS2_PLACEMENT_3D ( 'NONE', #66178, #28953, #72443 ) ; +#3579 = ORIENTED_EDGE ( 'NONE', *, *, #80501, .T. ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 21.59027028261003200, -28.70555803802994500 ) ) ; +#3580 = ADVANCED_FACE ( 'NONE', ( #56241 ), #6605, .F. ) ; +#3581 = ORIENTED_EDGE ( 'NONE', *, *, #47809, .F. ) ; +#3582 = FACE_OUTER_BOUND ( 'NONE', #78977, .T. ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 90.36203212531317800, -28.38801640354855800 ) ) ; +#3584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627475800, 77.93535825203913700, -28.53896444442250400 ) ) ; +#3586 = CONICAL_SURFACE ( 'NONE', #60584, 10.00000000000009200, 0.7853981633974447300 ) ; +#3587 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#3588 = AXIS2_PLACEMENT_3D ( 'NONE', #42305, #5053, #48540 ) ; +#3589 = ORIENTED_EDGE ( 'NONE', *, *, #70118, .F. ) ; +#3590 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14542, #70554, #64603, #27339 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659442200, 0.0005685240369918534200 ), + .UNSPECIFIED. ) ; +#3591 = ADVANCED_FACE ( 'NONE', ( #41643 ), #54296, .T. ) ; +#3592 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 43.65857157145691000, -28.20555803802997700 ) ) ; +#3593 = EDGE_CURVE ( 'NONE', #15551, #63399, #70842, .T. ) ; +#3594 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819626700, 81.65075715145296400, -28.20555803803005900 ) ) ; +#3596 = AXIS2_PLACEMENT_3D ( 'NONE', #36786, #62107, #24841 ) ; +#3597 = FACE_OUTER_BOUND ( 'NONE', #34139, .T. ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543113700, 61.36477483291889700, -28.27573853395004700 ) ) ; +#3599 = ORIENTED_EDGE ( 'NONE', *, *, #14100, .F. ) ; +#3600 = DIRECTION ( 'NONE', ( -1.000000000000000000, -4.427675157731252400E-014, 0.0000000000000000000 ) ) ; +#3601 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 20.44069092601377900, -28.35186440610857200 ) ) ; +#3602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3603 = ORIENTED_EDGE ( 'NONE', *, *, #46476, .F. ) ; +#3604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3605 = VERTEX_POINT ( 'NONE', #48620 ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 61.65075715145309900, -28.20555803802997700 ) ) ; +#3608 = ORIENTED_EDGE ( 'NONE', *, *, #38637, .T. ) ; +#3607 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3609 = VECTOR ( 'NONE', #56299, 1000.000000000000000 ) ; +#3610 = CARTESIAN_POINT ( 'NONE', ( -16.33257079600102600, 46.12986017865679900, -28.62099087449130900 ) ) ; +#3611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 61.46283204837325800, -28.48697406221693400 ) ) ; +#3613 = ORIENTED_EDGE ( 'NONE', *, *, #53599, .F. ) ; +#3614 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.22294471194861400, -28.20555803802997700 ) ) ; +#3615 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455569500, 89.72166103827331100, -28.53892303408230500 ) ) ; +#3616 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428636500, 18.07141756547896700, -28.70555803802992800 ) ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( -24.37458850096239600, 99.04499066003005200, -22.21801917939274400 ) ) ; +#3618 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101300, 40.29999999999999000, -28.45034744217088700 ) ) ; +#3619 = CONICAL_SURFACE ( 'NONE', #58355, 10.00000000000009200, 0.7853981633974447300 ) ; +#3621 = EDGE_CURVE ( 'NONE', #24198, #7367, #62351, .T. ) ; +#3620 = ORIENTED_EDGE ( 'NONE', *, *, #67337, .F. ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.22294471194862800, -28.20555803802997700 ) ) ; +#3623 = EDGE_CURVE ( 'NONE', #56121, #33159, #58194, .T. ) ; +#3624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3625 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109262100, 18.47143078992715500, -28.37063977681164700 ) ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( -16.57123091997351900, 61.47225659168401500, -28.53062721603924200 ) ) ; +#3627 = ORIENTED_EDGE ( 'NONE', *, *, #12111, .F. ) ; +#3628 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.86203212531320300, -28.38801640354855800 ) ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22107, #59362, #34623, #78125 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709392300, 0.0006599881756735064700 ), + .UNSPECIFIED. ) ; +#3631 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#3633 = EDGE_CURVE ( 'NONE', #79578, #58433, #25120, .T. ) ; +#3634 = FACE_OUTER_BOUND ( 'NONE', #42602, .T. ) ; +#3635 = EDGE_CURVE ( 'NONE', #31243, #48416, #47848, .T. ) ; +#3636 = FACE_OUTER_BOUND ( 'NONE', #50979, .T. ) ; +#3637 = ORIENTED_EDGE ( 'NONE', *, *, #4963, .T. ) ; +#3638 = ORIENTED_EDGE ( 'NONE', *, *, #30825, .F. ) ; +#3639 = ORIENTED_EDGE ( 'NONE', *, *, #58923, .F. ) ; +#3640 = ORIENTED_EDGE ( 'NONE', *, *, #60732, .T. ) ; +#3641 = ORIENTED_EDGE ( 'NONE', *, *, #49369, .F. ) ; +#3642 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51806, #64396, #33350, #76863, #39598, #2315 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 9.107298248878237200E-018, 0.001942186938636041300, 0.003884373877272073600 ), + .UNSPECIFIED. ) ; +#3643 = ORIENTED_EDGE ( 'NONE', *, *, #67855, .T. ) ; +#3644 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 60.33333333333334300, 5.722645192245503900 ) ) ; +#3645 = ORIENTED_EDGE ( 'NONE', *, *, #56665, .T. ) ; +#3646 = AXIS2_PLACEMENT_3D ( 'NONE', #39348, #2093, #45577 ) ; +#3647 = EDGE_CURVE ( 'NONE', #54306, #16590, #8548, .T. ) ; +#3648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3649 = EDGE_CURVE ( 'NONE', #8921, #56243, #33411, .T. ) ; +#3650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3651 = EDGE_CURVE ( 'NONE', #5281, #73733, #37733, .T. ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459542900, 89.08026449164336200, -28.70555803802997700 ) ) ; +#3653 = ADVANCED_FACE ( 'NONE', ( #78676 ), #19257, .F. ) ; +#3654 = FACE_OUTER_BOUND ( 'NONE', #5235, .T. ) ; +#3655 = ORIENTED_EDGE ( 'NONE', *, *, #65727, .T. ) ; +#3656 = AXIS2_PLACEMENT_3D ( 'NONE', #77446, #40171, #2905 ) ; +#3657 = ORIENTED_EDGE ( 'NONE', *, *, #30542, .F. ) ; +#3658 = CARTESIAN_POINT ( 'NONE', ( -2.726435770771452800, 7.503450341053294900, -28.41129763681818700 ) ) ; +#3659 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 54.50000000000000700, -7.061964498581026800 ) ) ; +#3660 = ORIENTED_EDGE ( 'NONE', *, *, #53581, .T. ) ; +#3661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3662 = FACE_OUTER_BOUND ( 'NONE', #34821, .T. ) ; +#3663 = EDGE_CURVE ( 'NONE', #5229, #2143, #18942, .T. ) ; +#3664 = ADVANCED_FACE ( 'NONE', ( #68889 ), #66958, .F. ) ; +#3665 = AXIS2_PLACEMENT_3D ( 'NONE', #23987, #67475, #30255 ) ; +#3666 = AXIS2_PLACEMENT_3D ( 'NONE', #43795, #37819, #25352 ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042475900, 38.00972971738995900, -28.70555803802994900 ) ) ; +#3669 = ORIENTED_EDGE ( 'NONE', *, *, #47955, .T. ) ; +#3668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3670 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42296, #60842, #11329, #54812 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454532170500E-007, 0.0004559726636569800300 ), + .UNSPECIFIED. ) ; +#3671 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3673 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#3674 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 31.66666666666667500, -6.705558038030000400 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 71.99560977511660600, -28.70555803802997700 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 69.77559325427188200, -28.45987523529578700 ) ) ; +#3677 = CIRCLE ( 'NONE', #64624, 10.00000000000009400 ) ; +#3678 = EDGE_LOOP ( 'NONE', ( #4889, #42019, #3599 ) ) ; +#3679 = ADVANCED_FACE ( 'NONE', ( #35814 ), #33862, .F. ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 51.43650294695080300, -28.30782889147504400 ) ) ; +#3681 = ORIENTED_EDGE ( 'NONE', *, *, #37330, .F. ) ; +#3682 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3683 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3684 = PLANE ( 'NONE', #33198 ) ; +#3685 = ADVANCED_FACE ( 'NONE', ( #21232 ), #743, .T. ) ; +#3686 = CONICAL_SURFACE ( 'NONE', #41974, 10.00000000000009200, 0.7853981633974447300 ) ; +#3687 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4244, #78808, #35558, #79069 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178555656300E-007, 0.0005050261270288299500 ), + .UNSPECIFIED. ) ; +#3688 = ADVANCED_FACE ( 'NONE', ( #50354 ), #48412, .T. ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.43250300240228500, -28.20555803802997700 ) ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343256600, 18.35339758437769200, -28.20555803803025800 ) ) ; +#3691 = AXIS2_PLACEMENT_3D ( 'NONE', #19416, #69181, #68916 ) ; +#3692 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 20.67701665379220800, -28.20555803802994500 ) ) ; +#3693 = FACE_OUTER_BOUND ( 'NONE', #33017, .T. ) ; +#3694 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 66.16666666666670000, -2.545304000185620600 ) ) ; +#3695 = ORIENTED_EDGE ( 'NONE', *, *, #73109, .T. ) ; +#3696 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3697 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#3698 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957539200, 42.59027028261002800, -28.70555803802996700 ) ) ; +#3701 = VERTEX_POINT ( 'NONE', #56229 ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492429500, 29.20543520232829600, -28.70555803802994200 ) ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571444300, 67.92318720225466700, -28.70555803803047500 ) ) ; +#3704 = AXIS2_PLACEMENT_3D ( 'NONE', #23184, #66698, #29482 ) ; +#3705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999949400, 49.13176086632792300, -28.70555803802996700 ) ) ; +#3707 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877865200, 50.07332680091207100, -28.37233769390157100 ) ) ; +#3708 = EDGE_CURVE ( 'NONE', #68768, #63652, #4482, .T. ) ; +#3709 = FACE_OUTER_BOUND ( 'NONE', #78193, .T. ) ; +#3710 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3711 = FACE_OUTER_BOUND ( 'NONE', #64331, .T. ) ; +#3712 = ORIENTED_EDGE ( 'NONE', *, *, #47937, .T. ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679528700, 51.08083798124332000, -28.45106778992437700 ) ) ; +#3714 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965400, 20.44069092601378300, -28.35186440610856800 ) ) ; +#3715 = VERTEX_POINT ( 'NONE', #37718 ) ; +#3716 = AXIS2_PLACEMENT_3D ( 'NONE', #55633, #18390, #61925 ) ; +#3717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3718 = VERTEX_POINT ( 'NONE', #31506 ) ; +#3719 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .T. ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 2.194425197110661000E-013, 68.62623792124919900, -28.70555803802997700 ) ) ; +#3721 = ORIENTED_EDGE ( 'NONE', *, *, #50893, .F. ) ; +#3722 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22250, #59521, #34777, #78293 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681237867500, 0.0007802304471358781600 ), + .UNSPECIFIED. ) ; +#3723 = VERTEX_POINT ( 'NONE', #12755 ) ; +#3724 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 90.16054007504463600, -28.34042301926880800 ) ) ; +#3725 = ORIENTED_EDGE ( 'NONE', *, *, #21601, .F. ) ; +#3726 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.23796787468681700, -28.38801640354855800 ) ) ; +#3727 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714282900, 33.17681279774500800, -28.70555803802996700 ) ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 87.94142842854303400, -28.20555803803030800 ) ) ; +#3729 = ORIENTED_EDGE ( 'NONE', *, *, #34029, .F. ) ; +#3730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3731 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515380800, 70.58127875436093700, -28.53757464917582400 ) ) ; +#3732 = CONICAL_SURFACE ( 'NONE', #51614, 10.00000000000009600, 0.7853981633974447300 ) ; +#3733 = EDGE_CURVE ( 'NONE', #35373, #36149, #70794, .T. ) ; +#3735 = ORIENTED_EDGE ( 'NONE', *, *, #17012, .F. ) ; +#3734 = CARTESIAN_POINT ( 'NONE', ( 10.98575180313151200, 80.01994747561603600, -28.24986299608874100 ) ) ; +#3736 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 81.46283204837340000, -28.48697406221667100 ) ) ; +#3737 = CARTESIAN_POINT ( 'NONE', ( -15.99167745881034400, 55.79999999999999000, -28.49360982173995200 ) ) ; +#3738 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 3.333333333333343700, 4.294441961970000500 ) ) ; +#3739 = ORIENTED_EDGE ( 'NONE', *, *, #66924, .T. ) ; +#3740 = EDGE_CURVE ( 'NONE', #24588, #6871, #56338, .T. ) ; +#3741 = EDGE_LOOP ( 'NONE', ( #34083, #76587, #226 ) ) ; +#3742 = CIRCLE ( 'NONE', #67240, 9.500000000000099500 ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 37.66666666666667100, -5.535685056952199400 ) ) ; +#3744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 71.43945992495532900, -28.34042301926880500 ) ) ; +#3746 = EDGE_CURVE ( 'NONE', #73075, #53164, #41875, .T. ) ; +#3747 = ORIENTED_EDGE ( 'NONE', *, *, #4467, .T. ) ; +#3748 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 2.666666666666678500, -8.133761268305512700 ) ) ; +#3750 = EDGE_CURVE ( 'NONE', #26563, #68982, #27457, .T. ) ; +#3751 = EDGE_CURVE ( 'NONE', #76771, #13621, #52312, .T. ) ; +#3752 = FACE_OUTER_BOUND ( 'NONE', #80639, .T. ) ; +#3753 = ORIENTED_EDGE ( 'NONE', *, *, #39993, .F. ) ; +#3754 = CARTESIAN_POINT ( 'NONE', ( 9.012762631076821400, 44.44999999999997400, -3.429005395757572600 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( -4.167182817396300400, 51.03343807497616800, -28.37235298663059500 ) ) ; +#3756 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 40.00000000000000000, 9.794441961969996100 ) ) ; +#3757 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3758 = ORIENTED_EDGE ( 'NONE', *, *, #33428, .T. ) ; +#3759 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 60.79999999999998300, -28.55171188418376400 ) ) ; +#3761 = AXIS2_PLACEMENT_3D ( 'NONE', #69569, #32329, #75824 ) ; +#3762 = EDGE_CURVE ( 'NONE', #50476, #46344, #2684, .T. ) ; +#3763 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3764 = EDGE_CURVE ( 'NONE', #34131, #79988, #12982, .T. ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3766 = EDGE_CURVE ( 'NONE', #63349, #64569, #65024, .T. ) ; +#3767 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 38.91070809551056400, -28.20555803802995200 ) ) ; +#3768 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49112, #42877, #24409, #67920 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352939623900E-007, 0.0007670609591620321000 ), + .UNSPECIFIED. ) ; +#3769 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511848700, 51.99560977511661300, -28.70555803802997700 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543114500, 60.23522516708108300, -28.27573853395004700 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999924900, 28.13176086632792000, -28.70555803802994200 ) ) ; +#3772 = AXIS2_PLACEMENT_3D ( 'NONE', #4446, #47932, #10724 ) ; +#3773 = CYLINDRICAL_SURFACE ( 'NONE', #71848, 10.00000000000000000 ) ; +#3774 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 26.44142842854307300, -28.20555803802994200 ) ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148552400, 23.59761904761909800, -28.70555803802998800 ) ) ; +#3776 = CONICAL_SURFACE ( 'NONE', #20257, 10.00000000000009400, 0.7853981633974447300 ) ; +#3777 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#3778 = EDGE_LOOP ( 'NONE', ( #49965, #21730, #9603, #63184 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957694600, 11.09027028261031100, -28.70555803803018000 ) ) ; +#3781 = ORIENTED_EDGE ( 'NONE', *, *, #40758, .F. ) ; +#3780 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3782 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567156700, 41.24660241562189400, -28.20555803802996700 ) ) ; +#3783 = ADVANCED_FACE ( 'NONE', ( #17310 ), #26853, .T. ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( -6.161764093899637200, 8.864092883706266700, -28.64083434776820900 ) ) ; +#3785 = AXIS2_PLACEMENT_3D ( 'NONE', #1658, #57701, #38913 ) ; +#3786 = ADVANCED_FACE ( 'NONE', ( #4655 ), #29993, .T. ) ; +#3787 = FACE_OUTER_BOUND ( 'NONE', #17439, .T. ) ; +#3788 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3789 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#3790 = EDGE_LOOP ( 'NONE', ( #53145, #14892, #38482 ) ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252815100, 20.46868088498121800, -28.51286550264510200 ) ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3793 = CONICAL_SURFACE ( 'NONE', #8302, 10.50000000000009400, 0.7853981633974482800 ) ; +#3794 = EDGE_LOOP ( 'NONE', ( #54367, #80347, #68207, #68828 ) ) ; +#3795 = ORIENTED_EDGE ( 'NONE', *, *, #72808, .T. ) ; +#3796 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 43.50000000000002800, -7.061964498581016200 ) ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 7.369082864396481700E-015, 11.92856308690586400, -28.36981695106779400 ) ) ; +#3798 = VERTEX_POINT ( 'NONE', #70615 ) ; +#3799 = FACE_OUTER_BOUND ( 'NONE', #74129, .T. ) ; +#3800 = ORIENTED_EDGE ( 'NONE', *, *, #64313, .T. ) ; +#3802 = ORIENTED_EDGE ( 'NONE', *, *, #40322, .T. ) ; +#3801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3803 = EDGE_LOOP ( 'NONE', ( #60039, #79308, #31564 ) ) ; +#3804 = ORIENTED_EDGE ( 'NONE', *, *, #10301, .T. ) ; +#3805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3806 = AXIS2_PLACEMENT_3D ( 'NONE', #64183, #57893, #51591 ) ; +#3808 = VERTEX_POINT ( 'NONE', #27127 ) ; +#3807 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( 1.835316115879929400, 57.14999999999997000, 6.710898919787457100 ) ) ; +#3811 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 9.932503002402294000, -28.20555803802994200 ) ) ; +#3812 = ADVANCED_FACE ( 'NONE', ( #46456 ), #77637, .F. ) ; +#3813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3814 = ORIENTED_EDGE ( 'NONE', *, *, #73390, .F. ) ; +#3815 = FACE_OUTER_BOUND ( 'NONE', #1442, .T. ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#3817 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 55.50000000000000000, -7.061964498581017900 ) ) ; +#3818 = ORIENTED_EDGE ( 'NONE', *, *, #52711, .T. ) ; +#3819 = VERTEX_POINT ( 'NONE', #52089 ) ; +#3820 = EDGE_CURVE ( 'NONE', #506, #67715, #79289, .T. ) ; +#3821 = ORIENTED_EDGE ( 'NONE', *, *, #42136, .T. ) ; +#3822 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466679500, 20.79130857014966700, -28.37223374938520600 ) ) ; +#3823 = VERTEX_POINT ( 'NONE', #70888 ) ; +#3824 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 75.79999999999984100, -28.70525300642875200 ) ) ; +#3825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69085, #56839, #75587, #38306 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775791087000, 0.0009605145132139155800 ), + .UNSPECIFIED. ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218856800, 30.42563948200642400, -28.45080305021058100 ) ) ; +#3827 = CONICAL_SURFACE ( 'NONE', #38481, 10.50000000000009600, 0.7853981633974500600 ) ; +#3828 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846553900, 90.79999999999982700, -28.55171188418368200 ) ) ; +#3829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567140300, 9.746602415621863400, -28.20555803803009500 ) ) ; +#3831 = ORIENTED_EDGE ( 'NONE', *, *, #42930, .F. ) ; +#3832 = AXIS2_PLACEMENT_3D ( 'NONE', #43797, #31344, #56063 ) ; +#3833 = CONICAL_SURFACE ( 'NONE', #44636, 10.50000000000009600, 0.7853981633974500600 ) ; +#3835 = ORIENTED_EDGE ( 'NONE', *, *, #26211, .F. ) ; +#3834 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753900, 30.39456479767170200, -28.70555803802995200 ) ) ; +#3836 = VERTEX_POINT ( 'NONE', #45834 ) ; +#3837 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 74.37738371066726000, -28.70555803802997700 ) ) ; +#3838 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 12.00000000000000900, -1.205558038030002800 ) ) ; +#3839 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552800, 61.49769010897077900, -28.61774594594320900 ) ) ; +#3840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 52.16666666666666400, 0.9380355014189834000 ) ) ; +#3843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3844 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000101300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#3845 = EDGE_CURVE ( 'NONE', #57598, #31933, #23171, .T. ) ; +#3846 = CIRCLE ( 'NONE', #72335, 10.00000000000009200 ) ; +#3847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3848 = EDGE_CURVE ( 'NONE', #9671, #19219, #64847, .T. ) ; +#3849 = CONICAL_SURFACE ( 'NONE', #76479, 10.00000000000009200, 0.7853981633974447300 ) ; +#3850 = EDGE_LOOP ( 'NONE', ( #26636, #51564, #56233, #54617 ) ) ; +#3851 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 41.52858243452104900, -28.70555803802997700 ) ) ; +#3852 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274332500, 53.66464174796075100, -28.53896444442201000 ) ) ; +#3853 = VERTEX_POINT ( 'NONE', #2599 ) ; +#3854 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 9.932503002402294000, -28.20555803802994200 ) ) ; +#3855 = ADVANCED_FACE ( 'NONE', ( #61119 ), #27671, .T. ) ; +#3856 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.16749699759768800, -28.20555803802995200 ) ) ; +#3857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3858 = FACE_OUTER_BOUND ( 'NONE', #77664, .T. ) ; +#3859 = ORIENTED_EDGE ( 'NONE', *, *, #36178, .F. ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909300, 66.76150692817284900, -28.68631150211663100 ) ) ; +#3861 = FACE_OUTER_BOUND ( 'NONE', #48625, .T. ) ; +#3862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3863 = ORIENTED_EDGE ( 'NONE', *, *, #24504, .F. ) ; +#3864 = EDGE_CURVE ( 'NONE', #10748, #62561, #50325, .T. ) ; +#3865 = EDGE_CURVE ( 'NONE', #50416, #59244, #35909, .T. ) ; +#3866 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#3867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8938, #27766, #46460, #9212 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638105811600, 0.0006040461757760624400 ), + .UNSPECIFIED. ) ; +#3868 = FACE_OUTER_BOUND ( 'NONE', #39636, .T. ) ; +#3869 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826527900, 17.95051138331395900, -28.33414295261580700 ) ) ; +#3870 = ORIENTED_EDGE ( 'NONE', *, *, #50651, .T. ) ; +#3871 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274697900, 34.73212903577620400, -28.37244029424744700 ) ) ; +#3872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3873 = ORIENTED_EDGE ( 'NONE', *, *, #4718, .T. ) ; +#3874 = EDGE_LOOP ( 'NONE', ( #56572, #57203, #76472 ) ) ; +#3875 = ORIENTED_EDGE ( 'NONE', *, *, #13695, .F. ) ; +#3876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3877 = ORIENTED_EDGE ( 'NONE', *, *, #33204, .T. ) ; +#3878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37395, #62186, #43643, #6418 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714966560000E-007, 0.0005869108620980655200 ), + .UNSPECIFIED. ) ; +#3879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3880 = ORIENTED_EDGE ( 'NONE', *, *, #36897, .T. ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 28.66749699759768400, -28.20555803802994200 ) ) ; +#3882 = ADVANCED_FACE ( 'NONE', ( #31913 ), #11472, .F. ) ; +#3883 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615328200, 60.80000000000004000, -28.55171188418384500 ) ) ; +#3884 = AXIS2_PLACEMENT_3D ( 'NONE', #35615, #48073, #72869 ) ; +#3885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3886 = EDGE_CURVE ( 'NONE', #1540, #26122, #21461, .T. ) ; +#3887 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3888 = EDGE_CURVE ( 'NONE', #44639, #7615, #6962, .T. ) ; +#3889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3890 = EDGE_CURVE ( 'NONE', #74584, #40985, #28047, .T. ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153558000, 80.79999999999984100, -28.55171188418395500 ) ) ; +#3892 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3893 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3418, #22205, #65742, #28504 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727633036464800E-007, 0.0004064396303279716500 ), + .UNSPECIFIED. ) ; +#3894 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389089500, 61.10236277681486400, -28.32100408376081900 ) ) ; +#3896 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148360700, 23.59761904761933900, -28.70555803802994200 ) ) ; +#3897 = FACE_OUTER_BOUND ( 'NONE', #25928, .T. ) ; +#3898 = AXIS2_PLACEMENT_3D ( 'NONE', #57483, #44926, #26510 ) ; +#3899 = EDGE_LOOP ( 'NONE', ( #4181, #17243, #85 ) ) ; +#3900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3901 = CARTESIAN_POINT ( 'NONE', ( -9.042760264135436500, 85.79999999999998300, -28.53819074160683700 ) ) ; +#3902 = VERTEX_POINT ( 'NONE', #34453 ) ; +#3903 = ORIENTED_EDGE ( 'NONE', *, *, #28420, .T. ) ; +#3904 = ORIENTED_EDGE ( 'NONE', *, *, #34204, .T. ) ; +#3905 = ORIENTED_EDGE ( 'NONE', *, *, #8184, .F. ) ; +#3906 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3907 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3908 = FACE_OUTER_BOUND ( 'NONE', #59706, .T. ) ; +#3909 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#3910 = AXIS2_PLACEMENT_3D ( 'NONE', #21192, #58430, #27181 ) ; +#3911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3913 = VERTEX_POINT ( 'NONE', #3409 ) ; +#3914 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63946, #45096, #76415, #39139 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3915 = AXIS2_PLACEMENT_3D ( 'NONE', #9246, #52776, #15539 ) ; +#3916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3917 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 83.67681279774510000, -28.70555803803030800 ) ) ; +#3918 = ORIENTED_EDGE ( 'NONE', *, *, #72780, .F. ) ; +#3919 = ADVANCED_FACE ( 'NONE', ( #44496 ), #42575, .T. ) ; +#3920 = CONICAL_SURFACE ( 'NONE', #78574, 10.00000000000009600, 0.7853981633974447300 ) ; +#3921 = ORIENTED_EDGE ( 'NONE', *, *, #46898, .T. ) ; +#3922 = ORIENTED_EDGE ( 'NONE', *, *, #21456, .F. ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 58.16666666666665700, -9.205558038030003900 ) ) ; +#3924 = AXIS2_PLACEMENT_3D ( 'NONE', #19729, #63270, #26003 ) ; +#3925 = EDGE_CURVE ( 'NONE', #50356, #15594, #73309, .T. ) ; +#3926 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68356, #24851, #62118, #31121 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.203766555968270600E-016, 0.001246264537621953900 ), + .UNSPECIFIED. ) ; +#3927 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408273400, 60.38586625357844200, -28.27331438134757100 ) ) ; +#3928 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001200, 12.87738371066728100, -28.70555803802994200 ) ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 3.040273598549672100, 18.22437813624619100, -28.30310527599306900 ) ) ; +#3930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3931 = FACE_OUTER_BOUND ( 'NONE', #16840, .T. ) ; +#3932 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.43250300240229600, -28.20555803802995200 ) ) ; +#3933 = EDGE_CURVE ( 'NONE', #45068, #26055, #75674, .T. ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000011500, 52.33333333333334300, 5.722645192245503100 ) ) ; +#3935 = ORIENTED_EDGE ( 'NONE', *, *, #65118, .F. ) ; +#3936 = VERTEX_POINT ( 'NONE', #65733 ) ; +#3937 = AXIS2_PLACEMENT_3D ( 'NONE', #38117, #867, #44348 ) ; +#3938 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040911300, 12.15857157145701000, -28.37229765499281000 ) ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782548300, 90.16054007504448000, -28.34042301926905300 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996100, 10.68315603019281900, -28.70555803802998100 ) ) ; +#3942 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 29.50000000000001800, 6.847000845227641200 ) ) ; +#3943 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965400, 49.65930907398620800, -28.35186440610858900 ) ) ; +#3944 = CIRCLE ( 'NONE', #51257, 9.500000000000097700 ) ; +#3945 = VERTEX_POINT ( 'NONE', #28498 ) ; +#3946 = AXIS2_PLACEMENT_3D ( 'NONE', #16131, #3862, #28689 ) ; +#3947 = VERTEX_POINT ( 'NONE', #28773 ) ; +#3948 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124986700, 65.13282980700519400, -28.53914313452737900 ) ) ; +#3949 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198457800, 60.90033558196107300, -28.70555803802997700 ) ) ; +#3950 = ORIENTED_EDGE ( 'NONE', *, *, #73255, .T. ) ; +#3951 = CONICAL_SURFACE ( 'NONE', #52128, 10.50000000000009600, 0.7853981633974500600 ) ; +#3952 = ORIENTED_EDGE ( 'NONE', *, *, #33562, .F. ) ; +#3953 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3954 = ORIENTED_EDGE ( 'NONE', *, *, #47194, .T. ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102000, 29.54280755395589300, -28.45034744217088400 ) ) ; +#3956 = ORIENTED_EDGE ( 'NONE', *, *, #38420, .T. ) ; +#3957 = CARTESIAN_POINT ( 'NONE', ( -12.81094891286206500, 8.905953890812385900, -28.64557659445530600 ) ) ; +#3958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3960 = ORIENTED_EDGE ( 'NONE', *, *, #42481, .F. ) ; +#3961 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3962 = AXIS2_PLACEMENT_3D ( 'NONE', #52268, #15043, #58556 ) ; +#3963 = ADVANCED_FACE ( 'NONE', ( #15374 ), #73753, .F. ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#3965 = ORIENTED_EDGE ( 'NONE', *, *, #75609, .F. ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762400, 21.02620220503713400, -28.70555803802994200 ) ) ; +#3967 = FACE_OUTER_BOUND ( 'NONE', #60476, .T. ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 53.65857157145694600, -28.20555803802997700 ) ) ; +#3969 = EDGE_CURVE ( 'NONE', #43457, #30374, #9492, .T. ) ; +#3970 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 64.00000000000000000, -1.205558038030002800 ) ) ; +#3971 = ORIENTED_EDGE ( 'NONE', *, *, #44581, .T. ) ; +#3972 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3973 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 49.42298334620755900, -28.20555803802996700 ) ) ; +#3974 = ORIENTED_EDGE ( 'NONE', *, *, #17371, .T. ) ; +#3975 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 39.35339758437810100, -28.20555803802995200 ) ) ; +#3976 = ORIENTED_EDGE ( 'NONE', *, *, #77178, .T. ) ; +#3977 = ORIENTED_EDGE ( 'NONE', *, *, #48665, .F. ) ; +#3978 = EDGE_LOOP ( 'NONE', ( #3905, #14968, #9808, #55460 ) ) ; +#3979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3980 = CONICAL_SURFACE ( 'NONE', #21719, 10.50000000000009600, 0.7853981633974482800 ) ; +#3981 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#3982 = ADVANCED_FACE ( 'NONE', ( #63059 ), #9953, .T. ) ; +#3983 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#3984 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844493900, 85.79999999999985500, -28.20555803803014400 ) ) ; +#3985 = ORIENTED_EDGE ( 'NONE', *, *, #45581, .F. ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( -2.558325395146951100, 8.915291560575681700, -28.64723264288323200 ) ) ; +#3987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#3989 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3990 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44388, #910, #56961, #19704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002680960718950900400, 0.0006654852833083931900 ), + .UNSPECIFIED. ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567158500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#3992 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148552400, 46.50238095238090400, -28.70555803802996700 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660897100, 70.13716795162599700, -28.48697406221726800 ) ) ; +#3994 = EDGE_CURVE ( 'NONE', #37515, #65179, #79602, .T. ) ; +#3995 = CIRCLE ( 'NONE', #79042, 10.50000000000009600 ) ; +#3997 = VERTEX_POINT ( 'NONE', #41486 ) ; +#3996 = ADVANCED_FACE ( 'NONE', ( #26074 ), #35268, .T. ) ; +#3998 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458393100, 50.08874248361073000, -28.53740755999537300 ) ) ; +#3999 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.16749699759768800, -28.20555803802997700 ) ) ; +#4000 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52901, #59164, #77940, #40663 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.477419510106528000E-005, 0.0003518478340460201000 ), + .UNSPECIFIED. ) ; +#4001 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4002 = AXIS2_PLACEMENT_3D ( 'NONE', #21682, #58917, #40145 ) ; +#4003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4004 = EDGE_CURVE ( 'NONE', #74996, #31088, #59135, .T. ) ; +#4005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17602, #54829, #36338, #79880 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671528707000E-007, 0.0007670610367944413900 ), + .UNSPECIFIED. ) ; +#4006 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 41.44069092601379400, -28.35186440610858600 ) ) ; +#4007 = EDGE_CURVE ( 'NONE', #54777, #52786, #58819, .T. ) ; +#4008 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958200, 71.46283204837337200, -28.48697406221668500 ) ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#4010 = ADVANCED_FACE ( 'NONE', ( #57197 ), #44319, .T. ) ; +#4011 = EDGE_CURVE ( 'NONE', #43972, #40694, #7526, .T. ) ; +#4012 = AXIS2_PLACEMENT_3D ( 'NONE', #2426, #45937, #8676 ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 2.372352466523036400, 94.50078697889553300, -28.27843125503092400 ) ) ; +#4014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4015 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372568400, 47.43535825203925100, -28.53896444442198500 ) ) ; +#4016 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 1.166666666666676300, -4.152999154772358800 ) ) ; +#4017 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23528, #60806, #42261, #5019 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521659103300, 0.0009492057883278497800 ), + .UNSPECIFIED. ) ; +#4018 = ORIENTED_EDGE ( 'NONE', *, *, #45818, .F. ) ; +#4019 = ORIENTED_EDGE ( 'NONE', *, *, #29925, .F. ) ; +#4020 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 31.02858243452105600, -28.70555803802996700 ) ) ; +#4021 = ORIENTED_EDGE ( 'NONE', *, *, #11115, .F. ) ; +#4022 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 35.50000000000000700, 2.454695999814385600 ) ) ; +#4023 = AXIS2_PLACEMENT_3D ( 'NONE', #46737, #9491, #53004 ) ; +#4024 = AXIS2_PLACEMENT_3D ( 'NONE', #7371, #50875, #13682 ) ; +#4025 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655690400, 49.42298334620756600, -28.20555803802997400 ) ) ; +#4027 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18874, #12641, #74649, #62400 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569977707200E-007, 0.0004053774948102311500 ), + .UNSPECIFIED. ) ; +#4028 = PLANE ( 'NONE', #4740 ) ; +#4029 = EDGE_CURVE ( 'NONE', #46326, #23135, #29964, .T. ) ; +#4030 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 0.5000000000000015500, 4.650848422521016300 ) ) ; +#4031 = AXIS2_PLACEMENT_3D ( 'NONE', #64995, #27724, #71211 ) ; +#4032 = CONICAL_SURFACE ( 'NONE', #39261, 10.50000000000009600, 0.7853981633974500600 ) ; +#4033 = ORIENTED_EDGE ( 'NONE', *, *, #77933, .F. ) ; +#4034 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900575200, 18.06267502090487300, -28.41043597897492000 ) ) ; +#4035 = EDGE_LOOP ( 'NONE', ( #80711, #5861, #8352, #69133, #13478 ) ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( 5.002572337883776800, 44.45000000000000300, -9.258522399762354000 ) ) ; +#4037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4038 = FACE_OUTER_BOUND ( 'NONE', #67413, .T. ) ; +#4039 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 37.83333333333334300, -12.20555803803000600 ) ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 15.94142842854265000, -28.20555803803025800 ) ) ; +#4041 = ORIENTED_EDGE ( 'NONE', *, *, #32101, .T. ) ; +#4042 = ORIENTED_EDGE ( 'NONE', *, *, #80557, .T. ) ; +#4043 = ORIENTED_EDGE ( 'NONE', *, *, #34543, .F. ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#4045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4046 = EDGE_CURVE ( 'NONE', #66272, #50903, #40639, .T. ) ; +#4047 = ORIENTED_EDGE ( 'NONE', *, *, #23804, .T. ) ; +#4048 = VERTEX_POINT ( 'NONE', #56517 ) ; +#4049 = AXIS2_PLACEMENT_3D ( 'NONE', #5344, #11610, #73620 ) ; +#4050 = AXIS2_PLACEMENT_3D ( 'NONE', #26126, #13623, #63390 ) ; +#4051 = CONICAL_SURFACE ( 'NONE', #57781, 10.50000000000009600, 0.7853981633974500600 ) ; +#4052 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.10252595950260000, -28.26641963845862500 ) ) ; +#4054 = CARTESIAN_POINT ( 'NONE', ( 17.25760911752228900, 91.23463471374348900, -28.44739918355522300 ) ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 69.28967419478925600, -28.59353418718928100 ) ) ; +#4056 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#4057 = CONICAL_SURFACE ( 'NONE', #70241, 10.50000000000009600, 0.7853981633974500600 ) ; +#4058 = ORIENTED_EDGE ( 'NONE', *, *, #66593, .T. ) ; +#4059 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857194100, 33.17681279774499400, -28.70555803802996700 ) ) ; +#4060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4061 = VERTEX_POINT ( 'NONE', #13297 ) ; +#4062 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4063 = EDGE_LOOP ( 'NONE', ( #33298, #55835, #48531 ) ) ; +#4064 = ORIENTED_EDGE ( 'NONE', *, *, #20726, .F. ) ; +#4065 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( 15.60419106280854600, 9.917488320457138700, -28.69383698522116800 ) ) ; +#4068 = ORIENTED_EDGE ( 'NONE', *, *, #68475, .F. ) ; +#4069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4070 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 20.67701665379184600, -28.20555803802994200 ) ) ; +#4071 = CIRCLE ( 'NONE', #43012, 10.00000000000009600 ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182600, 39.13131911501876200, -28.51286550264509500 ) ) ; +#4073 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21759, #59006, #34260, #77766 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459157201831100E-007, 0.0007679767755142070700 ), + .UNSPECIFIED. ) ; +#4074 = ADVANCED_FACE ( 'NONE', ( #55222 ), #53284, .F. ) ; +#4075 = VERTEX_POINT ( 'NONE', #76645 ) ; +#4076 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 20.24660241562189400, -28.20555803802994200 ) ) ; +#4077 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846541200, 29.49920551340398900, -28.70555803802994200 ) ) ; +#4078 = AXIS2_PLACEMENT_3D ( 'NONE', #69289, #32043, #75545 ) ; +#4079 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 41.33333333333335700, 5.722645192245503900 ) ) ; +#4080 = CONICAL_SURFACE ( 'NONE', #12800, 10.50000000000009600, 0.7853981633974500600 ) ; +#4081 = ORIENTED_EDGE ( 'NONE', *, *, #13185, .T. ) ; +#4082 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4083 = ORIENTED_EDGE ( 'NONE', *, *, #34775, .T. ) ; +#4084 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#4085 = ADVANCED_FACE ( 'NONE', ( #69828 ), #20205, .T. ) ; +#4086 = AXIS2_PLACEMENT_3D ( 'NONE', #41316, #4060, #47538 ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( -2.405424185024970900, 57.15000000000060300, 7.408702235350238800 ) ) ; +#4088 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389100, 9.936502946951318200, -28.30782889147480600 ) ) ; +#4089 = EDGE_CURVE ( 'NONE', #12637, #18050, #15463, .T. ) ; +#4090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4092 = ADVANCED_FACE ( 'NONE', ( #13432 ), #67892, .F. ) ; +#4093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4094 = ORIENTED_EDGE ( 'NONE', *, *, #70488, .T. ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( -18.39679006784580300, 8.302232376989071100, -28.12668535563885500 ) ) ; +#4096 = EDGE_LOOP ( 'NONE', ( #72183, #4742, #34409, #8362 ) ) ; +#4097 = ADVANCED_FACE ( 'NONE', ( #36728 ), #34820, .T. ) ; +#4098 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4099 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#4100 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65606, #71859, #47055, #9831 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610211000, 0.0004765929656973737600 ), + .UNSPECIFIED. ) ; +#4101 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 30.93650294695131500, -28.30782889147481600 ) ) ; +#4102 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290097500, 49.56267502090536700, -28.41043597897461800 ) ) ; +#4103 = ADVANCED_FACE ( 'NONE', ( #3636 ), #1680, .F. ) ; +#4104 = CYLINDRICAL_SURFACE ( 'NONE', #60629, 10.00000000000000000 ) ; +#4105 = EDGE_LOOP ( 'NONE', ( #2668, #61843, #16876, #64526 ) ) ; +#4106 = CIRCLE ( 'NONE', #78546, 10.50000000000009200 ) ; +#4107 = ORIENTED_EDGE ( 'NONE', *, *, #17613, .F. ) ; +#4108 = EDGE_CURVE ( 'NONE', #29460, #68073, #969, .T. ) ; +#4109 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 70.13716795162659400, -28.48697406221667400 ) ) ; +#4110 = ORIENTED_EDGE ( 'NONE', *, *, #23924, .F. ) ; +#4111 = FACE_OUTER_BOUND ( 'NONE', #26044, .T. ) ; +#4113 = EDGE_CURVE ( 'NONE', #67641, #39470, #67314, .T. ) ; +#4112 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63462, #19937, #69686, #32427, #75941, #38646 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003304700, 0.004118671204006609300 ), + .UNSPECIFIED. ) ; +#4114 = ORIENTED_EDGE ( 'NONE', *, *, #73221, .F. ) ; +#4115 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 60.34510448120795400, -28.37193179497697300 ) ) ; +#4116 = ORIENTED_EDGE ( 'NONE', *, *, #75613, .T. ) ; +#4118 = ORIENTED_EDGE ( 'NONE', *, *, #61593, .T. ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 9.833333333333342800, 0.1341879241256075400 ) ) ; +#4119 = CONICAL_SURFACE ( 'NONE', #54082, 10.00000000000009400, 0.7853981633974447300 ) ; +#4120 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#4121 = EDGE_CURVE ( 'NONE', #26644, #36192, #18250, .T. ) ; +#4122 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.00000000000000700, -1.205558038030005300 ) ) ; +#4124 = EDGE_CURVE ( 'NONE', #62031, #44984, #38658, .T. ) ; +#4125 = ORIENTED_EDGE ( 'NONE', *, *, #64559, .T. ) ; +#4126 = AXIS2_PLACEMENT_3D ( 'NONE', #32502, #76019, #69762 ) ; +#4127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4128 = CIRCLE ( 'NONE', #79098, 10.00000000000009600 ) ; +#4129 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4130 = EDGE_LOOP ( 'NONE', ( #57804, #66012, #13210 ) ) ; +#4131 = VERTEX_POINT ( 'NONE', #64991 ) ; +#4132 = VERTEX_POINT ( 'NONE', #58693 ) ; +#4133 = ORIENTED_EDGE ( 'NONE', *, *, #64667, .T. ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511912200, 81.99560977511663400, -28.70555803802997700 ) ) ; +#4135 = FACE_OUTER_BOUND ( 'NONE', #28923, .T. ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( -15.18519915588398200, 9.872482245996387500, -28.70400831389253700 ) ) ; +#4137 = ORIENTED_EDGE ( 'NONE', *, *, #38628, .T. ) ; +#4138 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965400, 20.44069092601378300, -28.35186440610856800 ) ) ; +#4139 = CIRCLE ( 'NONE', #22668, 10.00000000000009200 ) ; +#4140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4141 = AXIS2_PLACEMENT_3D ( 'NONE', #48160, #10953, #54437 ) ; +#4142 = EDGE_CURVE ( 'NONE', #33960, #62529, #52828, .T. ) ; +#4143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4144 = EDGE_CURVE ( 'NONE', #19202, #77841, #22161, .T. ) ; +#4145 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30726, #74266, #49441, #12228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211201000, 0.001517199873936352000 ), + .UNSPECIFIED. ) ; +#4146 = EDGE_CURVE ( 'NONE', #75777, #1355, #71805, .T. ) ; +#4147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4148 = ORIENTED_EDGE ( 'NONE', *, *, #25826, .F. ) ; +#4149 = AXIS2_PLACEMENT_3D ( 'NONE', #29554, #4746, #48238 ) ; +#4150 = ORIENTED_EDGE ( 'NONE', *, *, #52235, .T. ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306343900, 28.50210619075126700, -28.25343951603343500 ) ) ; +#4152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4153 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#4154 = AXIS2_PLACEMENT_3D ( 'NONE', #24915, #6135, #37383 ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567306400, 18.35339758437789800, -28.20555803803009500 ) ) ; +#4157 = CIRCLE ( 'NONE', #46580, 10.00000000000009400 ) ; +#4158 = ORIENTED_EDGE ( 'NONE', *, *, #41305, .T. ) ; +#4159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4161 = AXIS2_PLACEMENT_3D ( 'NONE', #64613, #21358, #64890 ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444266500, 71.87833896172672600, -28.53892303408235200 ) ) ; +#4163 = EDGE_CURVE ( 'NONE', #29982, #8772, #51289, .T. ) ; +#4164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 51.25732391202386400, -28.20555803803014400 ) ) ; +#4166 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528428000, 49.63131911501857700, -28.51286550264483200 ) ) ; +#4167 = AXIS2_PLACEMENT_3D ( 'NONE', #70879, #52352, #39876 ) ; +#4168 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#4169 = AXIS2_PLACEMENT_3D ( 'NONE', #53637, #41127, #4129 ) ; +#4170 = CARTESIAN_POINT ( 'NONE', ( -3.639407206442138800, 49.66749699759768100, -28.25435056028472400 ) ) ; +#4171 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2602, #9117, #27955, #71432 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521660924300, 0.0009492057883278574800 ), + .UNSPECIFIED. ) ; +#4172 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909500, 64.83849307182684600, -28.68631150211663100 ) ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( -4.469863111190365500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#4174 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#4175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475600, 13.73928571352687000, -28.36868303842836500 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#4178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4179 = ORIENTED_EDGE ( 'NONE', *, *, #47764, .T. ) ; +#4180 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4181 = ORIENTED_EDGE ( 'NONE', *, *, #11744, .T. ) ; +#4182 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701300, 34.11903418172681800, -28.69431509262337700 ) ) ; +#4183 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#4184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4185 = CONICAL_SURFACE ( 'NONE', #70972, 10.50000000000009600, 0.7853981633974500600 ) ; +#4186 = AXIS2_PLACEMENT_3D ( 'NONE', #61463, #24184, #67697 ) ; +#4187 = VERTEX_POINT ( 'NONE', #27999 ) ; +#4188 = CIRCLE ( 'NONE', #70644, 10.00000000000009200 ) ; +#4189 = ORIENTED_EDGE ( 'NONE', *, *, #29907, .F. ) ; +#4190 = CIRCLE ( 'NONE', #40766, 10.00000000000009600 ) ; +#4191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36177, #73449, #42403, #5168 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007365383014242801900, 0.0008826254138089559100 ), + .UNSPECIFIED. ) ; +#4192 = ORIENTED_EDGE ( 'NONE', *, *, #61544, .T. ) ; +#4193 = ORIENTED_EDGE ( 'NONE', *, *, #61595, .T. ) ; +#4194 = ADVANCED_FACE ( 'NONE', ( #49350 ), #47398, .T. ) ; +#4195 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 56.00000000000000700, 6.794441961969995200 ) ) ; +#4196 = AXIS2_PLACEMENT_3D ( 'NONE', #71167, #33904, #77422 ) ; +#4197 = CONICAL_SURFACE ( 'NONE', #50349, 10.00000000000009200, 0.7853981633974447300 ) ; +#4198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4199 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857191200, 80.07141756547869700, -28.70555803803030800 ) ) ; +#4200 = ADVANCED_FACE ( 'NONE', ( #65959 ), #32830, .T. ) ; +#4201 = EDGE_CURVE ( 'NONE', #4338, #17037, #38354, .T. ) ; +#4202 = ORIENTED_EDGE ( 'NONE', *, *, #43667, .F. ) ; +#4203 = CIRCLE ( 'NONE', #71210, 10.00000000000009200 ) ; +#4204 = AXIS2_PLACEMENT_3D ( 'NONE', #52460, #33734, #8941 ) ; +#4205 = VERTEX_POINT ( 'NONE', #3728 ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122133900, 39.57332680091207100, -28.37233769390155700 ) ) ; +#4207 = EDGE_LOOP ( 'NONE', ( #76841, #74847, #16411, #68282, #41388 ) ) ; +#4208 = ORIENTED_EDGE ( 'NONE', *, *, #38500, .T. ) ; +#4209 = ORIENTED_EDGE ( 'NONE', *, *, #52122, .F. ) ; +#4210 = FACE_OUTER_BOUND ( 'NONE', #33829, .T. ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#4212 = ADVANCED_FACE ( 'NONE', ( #80536 ), #62049, .F. ) ; +#4213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4214 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655690400, 49.42298334620756600, -28.20555803802997400 ) ) ; +#4215 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 27.33333333333335000, -10.73183747965883100 ) ) ; +#4216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4217 = ORIENTED_EDGE ( 'NONE', *, *, #52459, .T. ) ; +#4218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4219 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487900, 66.13383585008139700, -28.37247596307092200 ) ) ; +#4220 = EDGE_CURVE ( 'NONE', #42990, #63087, #78608, .T. ) ; +#4221 = VERTEX_POINT ( 'NONE', #16269 ) ; +#4222 = CONICAL_SURFACE ( 'NONE', #38788, 10.50000000000009600, 0.7853981633974518300 ) ; +#4223 = EDGE_CURVE ( 'NONE', #6616, #11140, #16312, .T. ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4225 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782548300, 90.16054007504448000, -28.34042301926905300 ) ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#4227 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504977100, 28.19228657120673300, -28.53891855579988100 ) ) ; +#4228 = EDGE_CURVE ( 'NONE', #66558, #27806, #23945, .T. ) ; +#4229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6751, #488, #56526, #19270 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249733500, 0.0007802304471361536500 ), + .UNSPECIFIED. ) ; +#4230 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4231 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310475700, 51.49769010897087200, -28.61774594594330900 ) ) ; +#4232 = EDGE_CURVE ( 'NONE', #18097, #16872, #14348, .T. ) ; +#4233 = AXIS2_PLACEMENT_3D ( 'NONE', #57907, #64193, #14388 ) ; +#4234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4235 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4236 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 61.83333333333334300, 0.1341879241256075400 ) ) ; +#4237 = CONICAL_SURFACE ( 'NONE', #78473, 10.00000000000009400, 0.7853981633974447300 ) ; +#4238 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709897900, 39.06267502090533100, -28.41043597897454700 ) ) ; +#4239 = EDGE_CURVE ( 'NONE', #10125, #426, #5609, .T. ) ; +#4240 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 8.673617379884035500E-016, -18.70555803803001300 ) ) ; +#4241 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#4243 = ORIENTED_EDGE ( 'NONE', *, *, #6265, .F. ) ; +#4244 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432791300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#4245 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701882600, 55.80000000000001100, -28.70555803802997700 ) ) ; +#4246 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 0.0000000000000000000, -1.205558038030005300 ) ) ; +#4247 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 39.15930907398620100, -28.35186440610857200 ) ) ; +#4248 = AXIS2_PLACEMENT_3D ( 'NONE', #79224, #54443, #60728 ) ; +#4249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4251 = EDGE_LOOP ( 'NONE', ( #16043, #29160, #6943 ) ) ; +#4250 = EDGE_CURVE ( 'NONE', #63478, #17957, #9449, .T. ) ; +#4252 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#4253 = EDGE_CURVE ( 'NONE', #76799, #14833, #45433, .T. ) ; +#4254 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4255 = EDGE_CURVE ( 'NONE', #77640, #47697, #75770, .T. ) ; +#4256 = VERTEX_POINT ( 'NONE', #17070 ) ; +#4257 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 80.34267608797603100, -28.20555803802997700 ) ) ; +#4258 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804060700, 63.65857157145700300, -28.37229765499282100 ) ) ; +#4259 = VECTOR ( 'NONE', #28967, 1000.000000000000000 ) ; +#4260 = CARTESIAN_POINT ( 'NONE', ( -5.098368728765947800, 50.54999999999999700, -28.62400292823466000 ) ) ; +#4261 = ORIENTED_EDGE ( 'NONE', *, *, #23803, .F. ) ; +#4262 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274726500, 45.54999999999998300, -28.20555803802996700 ) ) ; +#4264 = FACE_OUTER_BOUND ( 'NONE', #1232, .T. ) ; +#4265 = ORIENTED_EDGE ( 'NONE', *, *, #49104, .F. ) ; +#4266 = AXIS2_PLACEMENT_3D ( 'NONE', #507, #75062, #37766 ) ; +#4267 = FACE_OUTER_BOUND ( 'NONE', #38304, .T. ) ; +#4269 = ORIENTED_EDGE ( 'NONE', *, *, #32717, .F. ) ; +#4268 = CARTESIAN_POINT ( 'NONE', ( 10.37141821671363200, 60.16749699759768800, -28.25056166218020700 ) ) ; +#4270 = VERTEX_POINT ( 'NONE', #35574 ) ; +#4271 = EDGE_CURVE ( 'NONE', #59807, #38941, #76610, .T. ) ; +#4272 = ORIENTED_EDGE ( 'NONE', *, *, #66939, .T. ) ; +#4273 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#4274 = AXIS2_PLACEMENT_3D ( 'NONE', #28093, #71596, #34330 ) ; +#4275 = AXIS2_PLACEMENT_3D ( 'NONE', #6156, #12425, #5898 ) ; +#4276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4278 = ADVANCED_FACE ( 'NONE', ( #12415 ), #74690, .F. ) ; +#4279 = FACE_OUTER_BOUND ( 'NONE', #50449, .T. ) ; +#4280 = ORIENTED_EDGE ( 'NONE', *, *, #5337, .T. ) ; +#4281 = CIRCLE ( 'NONE', #75858, 10.00000000000009400 ) ; +#4282 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#4283 = ORIENTED_EDGE ( 'NONE', *, *, #10443, .T. ) ; +#4284 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4286 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, -0.9999999999999833500, -1.205558038030002800 ) ) ; +#4287 = ORIENTED_EDGE ( 'NONE', *, *, #11993, .F. ) ; +#4288 = ORIENTED_EDGE ( 'NONE', *, *, #63368, .F. ) ; +#4289 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8610, #70909, #39910, #2620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143690933400E-007, 0.0004559721418120849900 ), + .UNSPECIFIED. ) ; +#4290 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187800, 30.96868088498122200, -28.51286550264512300 ) ) ; +#4291 = VERTEX_POINT ( 'NONE', #4798 ) ; +#4292 = ADVANCED_FACE ( 'NONE', ( #10454 ), #48299, .F. ) ; +#4293 = CIRCLE ( 'NONE', #31956, 10.50000000000009600 ) ; +#4294 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 33.33333333333332100, -3.705558038030004400 ) ) ; +#4295 = AXIS2_PLACEMENT_3D ( 'NONE', #11781, #55269, #18020 ) ; +#4296 = EDGE_LOOP ( 'NONE', ( #36413, #57763, #78846, #18442 ) ) ; +#4297 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#4298 = PLANE ( 'NONE', #19181 ) ; +#4299 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671711200, 79.66414768974040300, -28.38420446581295000 ) ) ; +#4300 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, -1.666666666666663400, -5.205558038030008400 ) ) ; +#4301 = ORIENTED_EDGE ( 'NONE', *, *, #26212, .T. ) ; +#4302 = EDGE_LOOP ( 'NONE', ( #10090, #60347, #51486 ) ) ; +#4303 = AXIS2_PLACEMENT_3D ( 'NONE', #53745, #16502, #60033 ) ; +#4304 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4305 = ORIENTED_EDGE ( 'NONE', *, *, #14727, .T. ) ; +#4306 = EDGE_LOOP ( 'NONE', ( #74001, #55402, #76639, #47343 ) ) ; +#4307 = CARTESIAN_POINT ( 'NONE', ( -2.865229788802000900, 44.45000000000000300, -10.28915418344423900 ) ) ; +#4308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4309 = EDGE_CURVE ( 'NONE', #22393, #31625, #29003, .T. ) ; +#4310 = CIRCLE ( 'NONE', #60170, 10.00000000000009200 ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 35.66666666666666400, 8.320721403598824400 ) ) ; +#4312 = CARTESIAN_POINT ( 'NONE', ( -8.272691540716730100, 75.79999999999998300, -28.53979898350160100 ) ) ; +#4313 = AXIS2_PLACEMENT_3D ( 'NONE', #31396, #74896, #37601 ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650687500, 18.08087956867491600, -28.30223257055620700 ) ) ; +#4315 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.15857157145700800, -28.20555803802994200 ) ) ; +#4316 = AXIS2_PLACEMENT_3D ( 'NONE', #65861, #28635, #72123 ) ; +#4317 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#4319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4320 = ADVANCED_FACE ( 'NONE', ( #60107 ), #17326, .T. ) ; +#4321 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4322 = PLANE ( 'NONE', #67187 ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( 24.82438335764306100, 5.087962000824441900, -20.59114741988626900 ) ) ; +#4324 = AXIS2_PLACEMENT_3D ( 'NONE', #57562, #20311, #26591 ) ; +#4325 = CONICAL_SURFACE ( 'NONE', #77813, 10.00000000000009200, 0.7853981633974447300 ) ; +#4326 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4327 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 10.12753447840889900, -28.38801640354855500 ) ) ; +#4328 = ORIENTED_EDGE ( 'NONE', *, *, #60712, .F. ) ; +#4329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4330 = ORIENTED_EDGE ( 'NONE', *, *, #20927, .F. ) ; +#4331 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5630, #42872, #11898, #55383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694887957000E-007, 0.0008724363063899909400 ), + .UNSPECIFIED. ) ; +#4332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4334 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474190100, 31.36172549728280500, -28.47230003642277300 ) ) ; +#4335 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155495500, 65.46616414991842700, -28.37247596307075200 ) ) ; +#4336 = COLOUR_RGB ( '',0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ; +#4337 = CONICAL_SURFACE ( 'NONE', #50727, 10.00000000000009400, 0.7853981633974447300 ) ; +#4339 = EDGE_CURVE ( 'NONE', #42984, #8428, #61350, .T. ) ; +#4338 = VERTEX_POINT ( 'NONE', #23869 ) ; +#4340 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 39.16666666666669300, -9.205558038030003900 ) ) ; +#4341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4342 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28544, #22237, #22517, #66041, #28810, #72304 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 7.757919228897728500E-018, 0.001929763249975370800, 0.003859526499950728700 ), + .UNSPECIFIED. ) ; +#4343 = EDGE_CURVE ( 'NONE', #28951, #53544, #43504, .T. ) ; +#4344 = EDGE_LOOP ( 'NONE', ( #37747, #79200, #39685 ) ) ; +#4345 = CIRCLE ( 'NONE', #12, 9.500000000000097700 ) ; +#4346 = CIRCLE ( 'NONE', #20015, 10.00000000000009200 ) ; +#4347 = ORIENTED_EDGE ( 'NONE', *, *, #77928, .F. ) ; +#4348 = ORIENTED_EDGE ( 'NONE', *, *, #42459, .F. ) ; +#4349 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5523, #42765, #18031, #61563 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672991594900E-007, 0.0007670610367943039100 ), + .UNSPECIFIED. ) ; +#4350 = ORIENTED_EDGE ( 'NONE', *, *, #65620, .T. ) ; +#4351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( -7.390577557546232700, 57.15000000000014800, 4.443225565277124600 ) ) ; +#4353 = EDGE_CURVE ( 'NONE', #29601, #66928, #58127, .T. ) ; +#4354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38275, #7029, #69574, #32332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766076005571700E-007, 0.001119323292485687600 ), + .UNSPECIFIED. ) ; +#4355 = CIRCLE ( 'NONE', #77917, 10.50000000000009600 ) ; +#4356 = ORIENTED_EDGE ( 'NONE', *, *, #30610, .F. ) ; +#4357 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4358 = EDGE_CURVE ( 'NONE', #13589, #48493, #46826, .T. ) ; +#4359 = FACE_OUTER_BOUND ( 'NONE', #40665, .T. ) ; +#4360 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510337200, 30.94069092601379400, -28.35186440610857500 ) ) ; +#4361 = EDGE_CURVE ( 'NONE', #22562, #20052, #64012, .T. ) ; +#4362 = EDGE_LOOP ( 'NONE', ( #41519, #72611, #17790 ) ) ; +#4363 = ORIENTED_EDGE ( 'NONE', *, *, #24070, .F. ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.73237991241949600, -28.26633708900883200 ) ) ; +#4365 = EDGE_LOOP ( 'NONE', ( #61758, #44629, #42661 ) ) ; +#4366 = CARTESIAN_POINT ( 'NONE', ( -20.77259328294389500, 7.113702411673773300, -26.89421571171227000 ) ) ; +#4367 = EDGE_LOOP ( 'NONE', ( #15234, #58299, #56775, #5617, #52804 ) ) ; +#4368 = EDGE_LOOP ( 'NONE', ( #14694, #28543, #54449 ) ) ; +#4369 = ORIENTED_EDGE ( 'NONE', *, *, #14427, .F. ) ; +#4370 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548966500, 41.44069092601378700, -28.35186440610859300 ) ) ; +#4371 = CIRCLE ( 'NONE', #36584, 10.00000000000009200 ) ; +#4372 = ORIENTED_EDGE ( 'NONE', *, *, #16662, .F. ) ; +#4373 = EDGE_CURVE ( 'NONE', #63397, #26320, #25039, .T. ) ; +#4374 = EDGE_CURVE ( 'NONE', #43398, #14550, #32403, .T. ) ; +#4375 = EDGE_CURVE ( 'NONE', #42026, #65390, #27009, .T. ) ; +#4376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4377 = ADVANCED_FACE ( 'NONE', ( #8460 ), #24397, .T. ) ; +#4378 = ORIENTED_EDGE ( 'NONE', *, *, #28739, .T. ) ; +#4379 = AXIS2_PLACEMENT_3D ( 'NONE', #25644, #69128, #31885 ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 22.65857157145701000, -28.20555803802995200 ) ) ; +#4381 = VERTEX_POINT ( 'NONE', #12156 ) ; +#4382 = FACE_OUTER_BOUND ( 'NONE', #76015, .T. ) ; +#4383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4384 = ADVANCED_FACE ( 'NONE', ( #56157 ), #37650, .T. ) ; +#4385 = AXIS2_PLACEMENT_3D ( 'NONE', #78310, #41023, #3744 ) ; +#4386 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 7.666666666666681200, -3.705558038030004400 ) ) ; +#4387 = AXIS2_PLACEMENT_3D ( 'NONE', #79809, #48476, #42520 ) ; +#4388 = AXIS2_PLACEMENT_3D ( 'NONE', #75489, #13503, #69247 ) ; +#4389 = CARTESIAN_POINT ( 'NONE', ( 11.44943154738438600, 50.66712112140477600, -28.65429851891210700 ) ) ; +#4390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65488, #21947, #77968, #40684 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003690754108545741200, 0.001145887823880360800 ), + .UNSPECIFIED. ) ; +#4391 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#4392 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 47.83333333333332100, -3.349151577478984600 ) ) ; +#4393 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#4394 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 70.34267608797567600, -28.20555803802997700 ) ) ; +#4395 = CIRCLE ( 'NONE', #30885, 10.00000000000009200 ) ; +#4396 = ADVANCED_FACE ( 'NONE', ( #72746 ), #4587, .F. ) ; +#4397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4399 = ORIENTED_EDGE ( 'NONE', *, *, #42147, .F. ) ; +#4400 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4401 = VERTEX_POINT ( 'NONE', #24926 ) ; +#4402 = CONICAL_SURFACE ( 'NONE', #16606, 10.00000000000009200, 0.7853981633974447300 ) ; +#4403 = AXIS2_PLACEMENT_3D ( 'NONE', #59845, #22566, #66093 ) ; +#4404 = EDGE_CURVE ( 'NONE', #51916, #66575, #70764, .T. ) ; +#4405 = ORIENTED_EDGE ( 'NONE', *, *, #18484, .T. ) ; +#4406 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4407 = ADVANCED_FACE ( 'NONE', ( #23108 ), #35743, .F. ) ; +#4408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4409 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498000, 70.16054007504415300, -28.34042301926921700 ) ) ; +#4410 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#4411 = CIRCLE ( 'NONE', #54168, 9.500000000000095900 ) ; +#4412 = FACE_OUTER_BOUND ( 'NONE', #63757, .T. ) ; +#4413 = ORIENTED_EDGE ( 'NONE', *, *, #10209, .F. ) ; +#4414 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4415 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 61.65075715145215400, -28.20555803803047800 ) ) ; +#4416 = EDGE_CURVE ( 'NONE', #38201, #2277, #17945, .T. ) ; +#4417 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4418 = FACE_OUTER_BOUND ( 'NONE', #62427, .T. ) ; +#4419 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.36203212531319200, -28.38801640354855500 ) ) ; +#4421 = AXIS2_PLACEMENT_3D ( 'NONE', #77172, #52381, #15159 ) ; +#4422 = ORIENTED_EDGE ( 'NONE', *, *, #8132, .T. ) ; +#4423 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#4424 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830841200, 79.95045548864068500, -28.33400579219045700 ) ) ; +#4426 = ORIENTED_EDGE ( 'NONE', *, *, #8758, .T. ) ; +#4425 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580929500, 48.36736912940426700, -28.67620115463453300 ) ) ; +#4427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4429 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175100, 81.13951010012876000, -28.36889022317246800 ) ) ; +#4430 = FACE_OUTER_BOUND ( 'NONE', #6123, .T. ) ; +#4431 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4432 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#4433 = FACE_OUTER_BOUND ( 'NONE', #73836, .T. ) ; +#4434 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182800, 49.63131911501876200, -28.51286550264510900 ) ) ; +#4435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4436 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285572300, 73.67681279774481600, -28.70555803803030800 ) ) ; +#4437 = VERTEX_POINT ( 'NONE', #62462 ) ; +#4438 = AXIS2_PLACEMENT_3D ( 'NONE', #8066, #33115, #26616 ) ; +#4439 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995707800, 13.11903418172686400, -28.69431509262337000 ) ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 23.59761904761919400, -28.70555803802994200 ) ) ; +#4441 = ORIENTED_EDGE ( 'NONE', *, *, #61807, .F. ) ; +#4442 = EDGE_LOOP ( 'NONE', ( #14373, #56113, #8195, #4732, #22568 ) ) ; +#4443 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 77.94142842854297700, -28.20555803802997700 ) ) ; +#4444 = ORIENTED_EDGE ( 'NONE', *, *, #61577, .T. ) ; +#4445 = ORIENTED_EDGE ( 'NONE', *, *, #54372, .T. ) ; +#4446 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#4447 = CONICAL_SURFACE ( 'NONE', #58863, 10.00000000000009600, 0.7853981633974482800 ) ; +#4448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4449 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4450 = EDGE_LOOP ( 'NONE', ( #28466, #16446, #19224, #15037 ) ) ; +#4451 = AXIS2_PLACEMENT_3D ( 'NONE', #47788, #60362, #4304 ) ; +#4452 = ORIENTED_EDGE ( 'NONE', *, *, #59033, .F. ) ; +#4453 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 96.59999999999999400, 13.79444196196998700 ) ) ; +#4454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4456 = ORIENTED_EDGE ( 'NONE', *, *, #41710, .F. ) ; +#4455 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61548, #49240, #68044, #30799 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957487769700, 0.004414112765716145400 ), + .UNSPECIFIED. ) ; +#4457 = FACE_OUTER_BOUND ( 'NONE', #63528, .T. ) ; +#4458 = EDGE_CURVE ( 'NONE', #20935, #34604, #39627, .T. ) ; +#4459 = ORIENTED_EDGE ( 'NONE', *, *, #45926, .T. ) ; +#4460 = FACE_OUTER_BOUND ( 'NONE', #59179, .T. ) ; +#4461 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 53.83333333333335700, -9.205558038030003900 ) ) ; +#4462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75523, #37982, #44475, #7242 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794223533300E-007, 0.0009376791149930525900 ), + .UNSPECIFIED. ) ; +#4464 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4465 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171145100, 29.95593345534905800, -28.57107744631859000 ) ) ; +#4466 = ADVANCED_FACE ( 'NONE', ( #52238 ), #66886, .T. ) ; +#4467 = EDGE_CURVE ( 'NONE', #23256, #49628, #3457, .T. ) ; +#4468 = EDGE_CURVE ( 'NONE', #31582, #27096, #69782, .T. ) ; +#4469 = CONICAL_SURFACE ( 'NONE', #66281, 10.50000000000009600, 0.7853981633974482800 ) ; +#4470 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510334500, 9.940690926013795400, -28.35186440610855000 ) ) ; +#4471 = FACE_OUTER_BOUND ( 'NONE', #11367, .T. ) ; +#4472 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 49.65930907398620800, -28.35186440610858900 ) ) ; +#4473 = ORIENTED_EDGE ( 'NONE', *, *, #64663, .T. ) ; +#4474 = ORIENTED_EDGE ( 'NONE', *, *, #78040, .F. ) ; +#4475 = CONICAL_SURFACE ( 'NONE', #376, 10.00000000000009200, 0.7853981633974447300 ) ; +#4476 = ADVANCED_FACE ( 'NONE', ( #54219 ), #33778, .T. ) ; +#4477 = AXIS2_PLACEMENT_3D ( 'NONE', #6570, #37544, #43799 ) ; +#4478 = EDGE_CURVE ( 'NONE', #47427, #68291, #50283, .T. ) ; +#4479 = EDGE_CURVE ( 'NONE', #60581, #37986, #19186, .T. ) ; +#4480 = ORIENTED_EDGE ( 'NONE', *, *, #16289, .F. ) ; +#4481 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4482 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25246, #18972, #6463, #68755 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345124300, 0.0008131256040090057300 ), + .UNSPECIFIED. ) ; +#4483 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306345000, 39.00210619075125600, -28.25343951603344200 ) ) ; +#4484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4485 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 25.16666666666666400, 9.794441961969994300 ) ) ; +#4486 = EDGE_CURVE ( 'NONE', #57500, #1277, #55313, .T. ) ; +#4487 = CONICAL_SURFACE ( 'NONE', #72910, 10.50000000000009600, 0.7853981633974500600 ) ; +#4488 = AXIS2_PLACEMENT_3D ( 'NONE', #24366, #67877, #30640 ) ; +#4489 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 80.16749699759753900, -28.20555803803030800 ) ) ; +#4490 = CIRCLE ( 'NONE', #60084, 10.50000000000009600 ) ; +#4491 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534556000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#4492 = ORIENTED_EDGE ( 'NONE', *, *, #35263, .F. ) ; +#4493 = ADVANCED_FACE ( 'NONE', ( #2607 ), #48348, .T. ) ; +#4494 = EDGE_LOOP ( 'NONE', ( #4834, #16232, #52538, #65967 ) ) ; +#4495 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466629300, 39.83106028708537800, -28.57333386111660200 ) ) ; +#4496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4497 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4498 = ADVANCED_FACE ( 'NONE', ( #6537 ), #44699, .T. ) ; +#4499 = ORIENTED_EDGE ( 'NONE', *, *, #76101, .T. ) ; +#4500 = AXIS2_PLACEMENT_3D ( 'NONE', #7433, #44659, #38162 ) ; +#4501 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#4502 = AXIS2_PLACEMENT_3D ( 'NONE', #10243, #53736, #16498 ) ; +#4503 = ADVANCED_FACE ( 'NONE', ( #21154 ), #79530, .T. ) ; +#4504 = CARTESIAN_POINT ( 'NONE', ( 3.778842085587900800, 9.935236322205883000, -28.30315276798570400 ) ) ; +#4505 = FACE_OUTER_BOUND ( 'NONE', #65310, .T. ) ; +#4506 = ORIENTED_EDGE ( 'NONE', *, *, #17064, .F. ) ; +#4507 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#4508 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 59.66666666666667100, -3.705558038030004400 ) ) ; +#4509 = EDGE_LOOP ( 'NONE', ( #39667, #19751, #61320 ) ) ; +#4510 = CARTESIAN_POINT ( 'NONE', ( 19.77439149588240100, 0.4512170082352805500, -21.73852730698811100 ) ) ; +#4511 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#4512 = ORIENTED_EDGE ( 'NONE', *, *, #27042, .F. ) ; +#4513 = EDGE_LOOP ( 'NONE', ( #57426, #78027, #72709, #75316 ) ) ; +#4514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4515 = ORIENTED_EDGE ( 'NONE', *, *, #28940, .T. ) ; +#4516 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484787100, 71.37838321498797700, -28.29547179040463000 ) ) ; +#4517 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 43.43454006867177200, -28.70555803802999500 ) ) ; +#4518 = CONICAL_SURFACE ( 'NONE', #65198, 10.00000000000009200, 0.7853981633974447300 ) ; +#4519 = CARTESIAN_POINT ( 'NONE', ( -17.23701223182906600, 19.81227583396991000, -28.45214906810759800 ) ) ; +#4520 = FACE_OUTER_BOUND ( 'NONE', #37343, .T. ) ; +#4521 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 81.43945992495501700, -28.34042301926910000 ) ) ; +#4522 = AXIS2_PLACEMENT_3D ( 'NONE', #2466, #15002, #39740 ) ; +#4524 = ORIENTED_EDGE ( 'NONE', *, *, #62140, .T. ) ; +#4523 = CARTESIAN_POINT ( 'NONE', ( 6.346264465071821600, 9.798328894942921300, -28.70352427628718700 ) ) ; +#4525 = EDGE_CURVE ( 'NONE', #2143, #44986, #31843, .T. ) ; +#4526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4527 = ORIENTED_EDGE ( 'NONE', *, *, #25710, .F. ) ; +#4528 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4529 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9019, #58810, #3043, #46539 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711401893100E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#4530 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198455500, 80.69966441803890700, -28.70555803802997700 ) ) ; +#4531 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217503000, 51.43945992495501000, -28.34042301926905700 ) ) ; +#4532 = FACE_OUTER_BOUND ( 'NONE', #34740, .T. ) ; +#4533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4534 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188357200, 30.89435118792235000, -28.41114655922300600 ) ) ; +#4535 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#4536 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#4537 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4538 = EDGE_CURVE ( 'NONE', #44806, #48534, #17239, .T. ) ; +#4539 = ORIENTED_EDGE ( 'NONE', *, *, #28259, .T. ) ; +#4540 = FACE_OUTER_BOUND ( 'NONE', #59763, .T. ) ; +#4541 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655344100, 10.17701665379216200, -28.20555803803002000 ) ) ; +#4542 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #71591 ) ) ; +#4543 = AXIS2_PLACEMENT_3D ( 'NONE', #26647, #70121, #32869 ) ; +#4544 = FACE_OUTER_BOUND ( 'NONE', #20299, .T. ) ; +#4545 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4546 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286476900, 88.93300507136167700, -28.67024809316606900 ) ) ; +#4547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4549 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 49.66349705304866500, -28.30782889147481600 ) ) ; +#4550 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#4551 = VERTEX_POINT ( 'NONE', #26293 ) ; +#4552 = AXIS2_PLACEMENT_3D ( 'NONE', #58576, #21344, #64872 ) ; +#4553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4554 = FACE_OUTER_BOUND ( 'NONE', #22461, .T. ) ; +#4556 = EDGE_LOOP ( 'NONE', ( #144, #48422, #29952, #67692 ) ) ; +#4555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4557 = CARTESIAN_POINT ( 'NONE', ( -11.72076650305797900, 60.09951448976265500, -28.63282631410026700 ) ) ; +#4558 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 66.00000000000000000, -1.205558038030002800 ) ) ; +#4559 = CONICAL_SURFACE ( 'NONE', #51883, 10.00000000000009200, 0.7853981633974447300 ) ; +#4560 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280407100, 33.15857157145701000, -28.37229765499281000 ) ) ; +#4561 = ORIENTED_EDGE ( 'NONE', *, *, #42696, .T. ) ; +#4562 = ORIENTED_EDGE ( 'NONE', *, *, #34775, .F. ) ; +#4563 = VECTOR ( 'NONE', #66878, 1000.000000000000000 ) ; +#4564 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 31.16666666666667100, 0.1341879241256129200 ) ) ; +#4565 = AXIS2_PLACEMENT_3D ( 'NONE', #64859, #77065, #33823 ) ; +#4567 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048800, 90.69949493661160000, -28.70555803803030800 ) ) ; +#4566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61720, #43171, #49412, #12205 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185240700, 0.001517199873936348700 ), + .UNSPECIFIED. ) ; +#4568 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .T. ) ; +#4569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4570 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, -3.833333333333318800, 0.9380355014189834000 ) ) ; +#4571 = CONICAL_SURFACE ( 'NONE', #65064, 10.00000000000009200, 0.7853981633974447300 ) ; +#4572 = CONICAL_SURFACE ( 'NONE', #14669, 10.00000000000009600, 0.7853981633974447300 ) ; +#4573 = ORIENTED_EDGE ( 'NONE', *, *, #27044, .T. ) ; +#4574 = CARTESIAN_POINT ( 'NONE', ( -8.933200327093503600, 44.45000000000003800, -3.480053323890137200 ) ) ; +#4575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4576 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 33.50000000000000700, -9.258116921287651700 ) ) ; +#4577 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32415, #38630, #57433, #20181 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004745607100E-007, 0.0004089065559710144000 ), + .UNSPECIFIED. ) ; +#4578 = PLANE ( 'NONE', #42502 ) ; +#4579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4580 = VERTEX_POINT ( 'NONE', #7476 ) ; +#4581 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537160800, 90.34267608797586000, -28.20555803803014400 ) ) ; +#4582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4583 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#4584 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#4585 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4586 = CARTESIAN_POINT ( 'NONE', ( 22.98391195352157700, 6.008060977307704500, -24.72774618663017100 ) ) ; +#4587 = CONICAL_SURFACE ( 'NONE', #4275, 10.50000000000009600, 0.7853981633974518300 ) ; +#4588 = ORIENTED_EDGE ( 'NONE', *, *, #3401, .T. ) ; +#4589 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999571500, 71.61077422949649900, -28.37255355648642300 ) ) ; +#4590 = CARTESIAN_POINT ( 'NONE', ( -9.838266626798526800, 93.79966511081751400, -28.47535546536771600 ) ) ; +#4591 = ORIENTED_EDGE ( 'NONE', *, *, #61591, .T. ) ; +#4592 = ORIENTED_EDGE ( 'NONE', *, *, #45417, .T. ) ; +#4593 = ORIENTED_EDGE ( 'NONE', *, *, #28862, .F. ) ; +#4594 = EDGE_CURVE ( 'NONE', #65603, #70154, #40866, .T. ) ; +#4595 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#4596 = ORIENTED_EDGE ( 'NONE', *, *, #17161, .F. ) ; +#4597 = CARTESIAN_POINT ( 'NONE', ( 19.89407411283521700, 101.3883583198084800, -20.76866371636657900 ) ) ; +#4598 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#4599 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#4600 = ADVANCED_FACE ( 'NONE', ( #64956 ), #13350, .T. ) ; +#4601 = CONICAL_SURFACE ( 'NONE', #36443, 10.50000000000009600, 0.7853981633974500600 ) ; +#4602 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957533900, 21.59027028261001700, -28.70555803802993500 ) ) ; +#4603 = ORIENTED_EDGE ( 'NONE', *, *, #71676, .T. ) ; +#4604 = EDGE_CURVE ( 'NONE', #45353, #60353, #29930, .T. ) ; +#4605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4606 = ORIENTED_EDGE ( 'NONE', *, *, #75613, .F. ) ; +#4607 = ADVANCED_FACE ( 'NONE', ( #669 ), #44419, .T. ) ; +#4608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4609 = EDGE_CURVE ( 'NONE', #10246, #71722, #61046, .T. ) ; +#4610 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 69.41684396980637900, -28.70555803803024400 ) ) ; +#4611 = VECTOR ( 'NONE', #4276, 1000.000000000000000 ) ; +#4612 = AXIS2_PLACEMENT_3D ( 'NONE', #14704, #64517, #39442 ) ; +#4613 = EDGE_LOOP ( 'NONE', ( #48050, #42517, #37327, #27951 ) ) ; +#4614 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 37.00000000000000700, 6.794441961969995200 ) ) ; +#4615 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285572300, 63.67681279774481600, -28.70555803803030800 ) ) ; +#4616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4617 = ORIENTED_EDGE ( 'NONE', *, *, #55480, .F. ) ; +#4618 = FACE_OUTER_BOUND ( 'NONE', #55083, .T. ) ; +#4619 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274725400, 24.86787096422368400, -28.37244029424738700 ) ) ; +#4620 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4621 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#4622 = CARTESIAN_POINT ( 'NONE', ( -9.356617020760117100, 57.15000000000000600, -2.799570202507346100 ) ) ; +#4623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4625 = VERTEX_POINT ( 'NONE', #8263 ) ; +#4624 = EDGE_CURVE ( 'NONE', #75483, #9591, #26447, .T. ) ; +#4626 = ADVANCED_FACE ( 'NONE', ( #27961 ), #39568, .T. ) ; +#4627 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6494, #37749, #75307, #38017 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709612400, 0.0006599881756735580800 ), + .UNSPECIFIED. ) ; +#4628 = EDGE_CURVE ( 'NONE', #34215, #29231, #11968, .T. ) ; +#4629 = AXIS2_PLACEMENT_3D ( 'NONE', #45101, #57659, #1625 ) ; +#4630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4631 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#4632 = CIRCLE ( 'NONE', #11473, 9.500000000000099500 ) ; +#4633 = ORIENTED_EDGE ( 'NONE', *, *, #70268, .F. ) ; +#4634 = CARTESIAN_POINT ( 'NONE', ( -23.92961685239193400, 5.535434754829113400, -23.21610300986380100 ) ) ; +#4635 = ORIENTED_EDGE ( 'NONE', *, *, #22519, .T. ) ; +#4636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4637 = EDGE_CURVE ( 'NONE', #32608, #30748, #77569, .T. ) ; +#4638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4639 = CONICAL_SURFACE ( 'NONE', #69607, 10.50000000000009400, 0.7853981633974500600 ) ; +#4640 = AXIS2_PLACEMENT_3D ( 'NONE', #30984, #6213, #68232 ) ; +#4641 = AXIS2_PLACEMENT_3D ( 'NONE', #28409, #77860, #9861 ) ; +#4642 = ORIENTED_EDGE ( 'NONE', *, *, #48990, .F. ) ; +#4643 = FACE_OUTER_BOUND ( 'NONE', #40218, .T. ) ; +#4644 = EDGE_LOOP ( 'NONE', ( #54265, #42121, #75842, #24217 ) ) ; +#4645 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654534400, 60.27440177985816000, -28.29986836858021300 ) ) ; +#4646 = AXIS2_PLACEMENT_3D ( 'NONE', #1176, #44650, #7423 ) ; +#4647 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16334, #53844, #35384, #78900, #41596, #4334 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249978165500, 0.003859526499956331000 ), + .UNSPECIFIED. ) ; +#4648 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 60.07141756547892400, -28.70555803802997700 ) ) ; +#4649 = ORIENTED_EDGE ( 'NONE', *, *, #63954, .T. ) ; +#4650 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 5.499999999999999100, 2.454695999814380200 ) ) ; +#4651 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9758, #46977, #59534, #22267 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345709800, 0.0008131256040083691900 ), + .UNSPECIFIED. ) ; +#4652 = CARTESIAN_POINT ( 'NONE', ( 4.002024496668909100, 28.78907889423218300, -28.25433304472392800 ) ) ; +#4653 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 45.66666666666667100, 2.794441961969992100 ) ) ; +#4654 = CIRCLE ( 'NONE', #29699, 10.00000000000009400 ) ; +#4655 = FACE_OUTER_BOUND ( 'NONE', #70969, .T. ) ; +#4656 = AXIS2_PLACEMENT_3D ( 'NONE', #29394, #72871, #35616 ) ; +#4657 = EDGE_LOOP ( 'NONE', ( #53972, #75330, #27167, #52518 ) ) ; +#4658 = ORIENTED_EDGE ( 'NONE', *, *, #27044, .F. ) ; +#4659 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#4660 = VERTEX_POINT ( 'NONE', #39835 ) ; +#4661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4662 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736723300, 45.54999999999997600, -28.70555803802996700 ) ) ; +#4663 = EDGE_LOOP ( 'NONE', ( #34407, #39169, #26263 ) ) ; +#4664 = EDGE_LOOP ( 'NONE', ( #25937, #18790, #58968, #37279 ) ) ; +#4665 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12210, #49419, #24709, #68223 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794219278000E-007, 0.0009376791149930113900 ), + .UNSPECIFIED. ) ; +#4666 = ORIENTED_EDGE ( 'NONE', *, *, #45924, .T. ) ; +#4667 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 36.92318720225497900, -28.70555803802995200 ) ) ; +#4668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4669 = AXIS2_PLACEMENT_3D ( 'NONE', #6047, #12316, #37030 ) ; +#4670 = ORIENTED_EDGE ( 'NONE', *, *, #70857, .F. ) ; +#4671 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 89.94924284854739900, -28.20555803802997700 ) ) ; +#4672 = ADVANCED_FACE ( 'NONE', ( #15286 ), #42506, .F. ) ; +#4673 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 63.99926474563208200, -28.70555803803007700 ) ) ; +#4674 = EDGE_CURVE ( 'NONE', #56951, #60899, #78292, .T. ) ; +#4675 = EDGE_LOOP ( 'NONE', ( #38939, #27012, #44571 ) ) ; +#4676 = CONICAL_SURFACE ( 'NONE', #27743, 10.50000000000009600, 0.7853981633974500600 ) ; +#4677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4678 = VERTEX_POINT ( 'NONE', #77373 ) ; +#4679 = AXIS2_PLACEMENT_3D ( 'NONE', #50680, #13477, #56979 ) ; +#4680 = VERTEX_POINT ( 'NONE', #40097 ) ; +#4681 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4682 = ORIENTED_EDGE ( 'NONE', *, *, #69192, .T. ) ; +#4683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4684 = PLANE ( 'NONE', #19872 ) ; +#4685 = FACE_OUTER_BOUND ( 'NONE', #20911, .T. ) ; +#4686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4687 = ADVANCED_FACE ( 'NONE', ( #62985 ), #27617, .T. ) ; +#4688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4689 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205871200, 90.08245724453601600, -28.27504145778806300 ) ) ; +#4690 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540434000, 79.08026449164337600, -28.70555803802997400 ) ) ; +#4691 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4692 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#4693 = ORIENTED_EDGE ( 'NONE', *, *, #32453, .F. ) ; +#4694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39689, #76966, #8669, #52180 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760841058100, 0.0007596411030283601800 ), + .UNSPECIFIED. ) ; +#4695 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4696 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4697 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#4698 = EDGE_CURVE ( 'NONE', #26910, #13603, #59063, .T. ) ; +#4699 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499799500, 61.76337688193841300, -28.37223523914913800 ) ) ; +#4700 = CARTESIAN_POINT ( 'NONE', ( 10.07349184251556200, 80.22161678501156200, -28.29547179040464000 ) ) ; +#4701 = CIRCLE ( 'NONE', #16110, 10.50000000000009600 ) ; +#4702 = ORIENTED_EDGE ( 'NONE', *, *, #50653, .T. ) ; +#4703 = EDGE_CURVE ( 'NONE', #42618, #78197, #63825, .T. ) ; +#4704 = VERTEX_POINT ( 'NONE', #9353 ) ; +#4705 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390051800, 80.13716795162663700, -28.48697406221650000 ) ) ; +#4706 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002500, 51.25489551879257300, -28.37193179497648300 ) ) ; +#4707 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819169800, 69.94924284854653300, -28.20555803803030800 ) ) ; +#4708 = EDGE_CURVE ( 'NONE', #18751, #51144, #46371, .T. ) ; +#4709 = ADVANCED_FACE ( 'NONE', ( #75595 ), #40555, .F. ) ; +#4710 = EDGE_CURVE ( 'NONE', #43891, #63313, #57122, .T. ) ; +#4711 = AXIS2_PLACEMENT_3D ( 'NONE', #55042, #17805, #61342 ) ; +#4712 = CONICAL_SURFACE ( 'NONE', #6181, 10.50000000000009600, 0.7853981633974518300 ) ; +#4713 = ORIENTED_EDGE ( 'NONE', *, *, #3066, .F. ) ; +#4714 = ORIENTED_EDGE ( 'NONE', *, *, #43412, .F. ) ; +#4715 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 51.66666666666667100, 5.722645192245505700 ) ) ; +#4716 = AXIS2_PLACEMENT_3D ( 'NONE', #76263, #38977, #1721 ) ; +#4717 = EDGE_CURVE ( 'NONE', #71334, #44027, #49306, .T. ) ; +#4718 = EDGE_CURVE ( 'NONE', #17425, #46777, #34900, .T. ) ; +#4719 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 60.10230989102911500, -28.61774594594330900 ) ) ; +#4720 = EDGE_CURVE ( 'NONE', #20286, #15206, #11399, .T. ) ; +#4721 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543113700, 41.36477483291889700, -28.27573853395004700 ) ) ; +#4722 = FACE_OUTER_BOUND ( 'NONE', #33263, .T. ) ; +#4723 = ORIENTED_EDGE ( 'NONE', *, *, #11908, .F. ) ; +#4724 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4725 = CONICAL_SURFACE ( 'NONE', #48456, 10.50000000000009600, 0.7853981633974500600 ) ; +#4726 = ORIENTED_EDGE ( 'NONE', *, *, #56825, .F. ) ; +#4727 = ORIENTED_EDGE ( 'NONE', *, *, #35719, .F. ) ; +#4728 = AXIS2_PLACEMENT_3D ( 'NONE', #52578, #15352, #58853 ) ; +#4729 = VERTEX_POINT ( 'NONE', #16173 ) ; +#4730 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571473200, 51.52858243452088500, -28.70555803803014400 ) ) ; +#4731 = CIRCLE ( 'NONE', #18914, 10.00000000000009200 ) ; +#4732 = ORIENTED_EDGE ( 'NONE', *, *, #58330, .F. ) ; +#4733 = ORIENTED_EDGE ( 'NONE', *, *, #59791, .T. ) ; +#4734 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76744, #27007, #26742, #39482 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178848308800E-007, 0.0005050261270277770800 ), + .UNSPECIFIED. ) ; +#4735 = ORIENTED_EDGE ( 'NONE', *, *, #65290, .F. ) ; +#4736 = ORIENTED_EDGE ( 'NONE', *, *, #21193, .T. ) ; +#4737 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#4738 = ORIENTED_EDGE ( 'NONE', *, *, #22108, .T. ) ; +#4739 = EDGE_CURVE ( 'NONE', #65306, #38217, #20433, .T. ) ; +#4740 = AXIS2_PLACEMENT_3D ( 'NONE', #22808, #78859, #41563 ) ; +#4741 = AXIS2_PLACEMENT_3D ( 'NONE', #32818, #76338, #39054 ) ; +#4742 = ORIENTED_EDGE ( 'NONE', *, *, #26195, .T. ) ; +#4743 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498000, 70.16054007504415300, -28.34042301926921700 ) ) ; +#4744 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#4745 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846313600, 60.79999999999999000, -28.55171188418376400 ) ) ; +#4746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4747 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 23.00000000000000400, -12.20555803803000200 ) ) ; +#4748 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828105100, 51.13768531620326000, -28.37082013777818900 ) ) ; +#4749 = FACE_OUTER_BOUND ( 'NONE', #74923, .T. ) ; +#4750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4752 = ORIENTED_EDGE ( 'NONE', *, *, #12998, .T. ) ; +#4753 = VERTEX_POINT ( 'NONE', #10181 ) ; +#4754 = ORIENTED_EDGE ( 'NONE', *, *, #766, .F. ) ; +#4755 = ORIENTED_EDGE ( 'NONE', *, *, #42254, .F. ) ; +#4756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4757 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047600, 80.36203212531219700, -28.38801640354842300 ) ) ; +#4758 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4759 = CONICAL_SURFACE ( 'NONE', #74519, 10.00000000000009200, 0.7853981633974447300 ) ; +#4760 = AXIS2_PLACEMENT_3D ( 'NONE', #64974, #27694, #71191 ) ; +#4761 = ORIENTED_EDGE ( 'NONE', *, *, #67999, .F. ) ; +#4762 = VERTEX_POINT ( 'NONE', #47395 ) ; +#4763 = ADVANCED_FACE ( 'NONE', ( #26002 ), #55150, .T. ) ; +#4764 = AXIS2_PLACEMENT_3D ( 'NONE', #33478, #76992, #39725 ) ; +#4765 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 57.50000000000000700, 2.454695999814380200 ) ) ; +#4766 = CONICAL_SURFACE ( 'NONE', #12432, 10.00000000000009200, 0.7853981633974447300 ) ; +#4767 = CARTESIAN_POINT ( 'NONE', ( 21.71236190568637200, 3.287638094312883600, -26.34782212000509100 ) ) ; +#4768 = EDGE_LOOP ( 'NONE', ( #34957, #29974, #50039 ) ) ; +#4769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4770 = AXIS2_PLACEMENT_3D ( 'NONE', #59830, #72607, #60099 ) ; +#4771 = ORIENTED_EDGE ( 'NONE', *, *, #62151, .F. ) ; +#4772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4773 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102700, 19.29999999999999000, -28.45034744217088000 ) ) ; +#4774 = ADVANCED_FACE ( 'NONE', ( #9414 ), #22085, .F. ) ; +#4775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4776 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899033600, 17.62363993080125400, -28.38670679782143200 ) ) ; +#4777 = AXIS2_PLACEMENT_3D ( 'NONE', #6393, #62425, #25161 ) ; +#4778 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609194100, 35.68533208989813200, -28.53910738522648000 ) ) ; +#4779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4780 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.65857157145661900, -28.20555803803030800 ) ) ; +#4781 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819191100, 59.94924284854719300, -28.20555803802997700 ) ) ; +#4782 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32162, #38376, #13685, #57179 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577241100 ), + .UNSPECIFIED. ) ; +#4783 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709903600, 49.56267502090536000, -28.41043597897461500 ) ) ; +#4784 = CARTESIAN_POINT ( 'NONE', ( 10.95973104149359000, 20.37561462481245700, -28.30309985153374100 ) ) ; +#4785 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4786 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 14.05000000000000600, -28.20555803802992800 ) ) ; +#4787 = AXIS2_PLACEMENT_3D ( 'NONE', #68066, #18294, #24553 ) ; +#4788 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#4789 = FACE_OUTER_BOUND ( 'NONE', #38882, .T. ) ; +#4790 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992500, 28.84510448120794400, -28.37193179497693400 ) ) ; +#4791 = ADVANCED_FACE ( 'NONE', ( #71729 ), #69752, .F. ) ; +#4792 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72765, #41466, #41718, #4470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925638759700E-007, 0.0004431156063177150000 ), + .UNSPECIFIED. ) ; +#4793 = CONICAL_SURFACE ( 'NONE', #40031, 10.50000000000009600, 0.7853981633974518300 ) ; +#4794 = VERTEX_POINT ( 'NONE', #47674 ) ; +#4795 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#4796 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4797 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4798 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655604300, 20.67701665379236100, -28.20555803802994500 ) ) ; +#4799 = VERTEX_POINT ( 'NONE', #10449 ) ; +#4800 = CARTESIAN_POINT ( 'NONE', ( 3.959731041493578000, 30.87561462481246700, -28.30309985153376200 ) ) ; +#4801 = ADVANCED_FACE ( 'NONE', ( #68817 ), #36657, .F. ) ; +#4802 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62984, #25457, #31967, #75478 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697186164900E-007, 0.0008724363063897051400 ), + .UNSPECIFIED. ) ; +#4803 = CIRCLE ( 'NONE', #64454, 10.50000000000009600 ) ; +#4804 = VERTEX_POINT ( 'NONE', #66481 ) ; +#4805 = CONICAL_SURFACE ( 'NONE', #36444, 10.00000000000009400, 0.7853981633974447300 ) ; +#4806 = EDGE_LOOP ( 'NONE', ( #71009, #33311, #79489 ) ) ; +#4807 = ORIENTED_EDGE ( 'NONE', *, *, #54336, .F. ) ; +#4808 = EDGE_CURVE ( 'NONE', #26714, #34888, #5974, .T. ) ; +#4809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4810 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.44142842854297000, -28.20555803802996700 ) ) ; +#4811 = CARTESIAN_POINT ( 'NONE', ( -16.57127784838931100, 80.12774695439682700, -28.53061079109372100 ) ) ; +#4812 = VERTEX_POINT ( 'NONE', #47935 ) ; +#4813 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 63.83333333333332100, -4.152999154772353500 ) ) ; +#4814 = FACE_OUTER_BOUND ( 'NONE', #24883, .T. ) ; +#4815 = EDGE_CURVE ( 'NONE', #55596, #69283, #53199, .T. ) ; +#4816 = ORIENTED_EDGE ( 'NONE', *, *, #77400, .F. ) ; +#4817 = ORIENTED_EDGE ( 'NONE', *, *, #73391, .F. ) ; +#4818 = ORIENTED_EDGE ( 'NONE', *, *, #27386, .F. ) ; +#4820 = EDGE_LOOP ( 'NONE', ( #48658, #12491, #34844, #31788 ) ) ; +#4819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4821 = ORIENTED_EDGE ( 'NONE', *, *, #23360, .F. ) ; +#4822 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 29.00000000000001800, -1.205558038030002800 ) ) ; +#4823 = ORIENTED_EDGE ( 'NONE', *, *, #18700, .T. ) ; +#4824 = EDGE_CURVE ( 'NONE', #18858, #14665, #72318, .T. ) ; +#4825 = CARTESIAN_POINT ( 'NONE', ( -16.62994320778230100, 40.61224493817486800, -28.57183245893610000 ) ) ; +#4826 = EDGE_CURVE ( 'NONE', #57949, #4680, #57820, .T. ) ; +#4827 = ORIENTED_EDGE ( 'NONE', *, *, #37201, .T. ) ; +#4828 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 17.19543746431604000, -28.61277292027076100 ) ) ; +#4829 = CIRCLE ( 'NONE', #63604, 10.50000000000009200 ) ; +#4830 = EDGE_CURVE ( 'NONE', #206, #76471, #5534, .T. ) ; +#4831 = ORIENTED_EDGE ( 'NONE', *, *, #10951, .T. ) ; +#4832 = EDGE_CURVE ( 'NONE', #30232, #69461, #43337, .T. ) ; +#4833 = CARTESIAN_POINT ( 'NONE', ( -7.518669099104061000, 44.45000000000001000, 2.982805305830885000 ) ) ; +#4834 = ORIENTED_EDGE ( 'NONE', *, *, #78138, .T. ) ; +#4835 = EDGE_LOOP ( 'NONE', ( #29194, #50215, #49663 ) ) ; +#4836 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 31.33333333333334300, 4.294441961970000500 ) ) ; +#4837 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526945500, 81.58737389638818600, -28.29936525552472700 ) ) ; +#4838 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .T. ) ; +#4839 = EDGE_LOOP ( 'NONE', ( #69926, #41978, #14176, #58367 ) ) ; +#4840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41470, #72505, #10479, #53973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459156310898000E-007, 0.0007679767755142042500 ), + .UNSPECIFIED. ) ; +#4841 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#4842 = FACE_OUTER_BOUND ( 'NONE', #74135, .T. ) ; +#4843 = AXIS2_PLACEMENT_3D ( 'NONE', #74681, #37377, #134 ) ; +#4844 = ORIENTED_EDGE ( 'NONE', *, *, #48037, .T. ) ; +#4845 = EDGE_CURVE ( 'NONE', #66662, #34264, #7459, .T. ) ; +#4846 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7688, #75976, #62958, #51174 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104755400, 0.0005411754951802475800 ), + .UNSPECIFIED. ) ; +#4847 = EDGE_CURVE ( 'NONE', #31605, #5467, #38576, .T. ) ; +#4848 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000408600, 67.94142842854304800, -28.20555803803030800 ) ) ; +#4849 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4850 = EDGE_CURVE ( 'NONE', #72149, #67647, #28950, .T. ) ; +#4852 = ORIENTED_EDGE ( 'NONE', *, *, #6860, .F. ) ; +#4851 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4853 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328671100, 89.66414768973983500, -28.38420446581329400 ) ) ; +#4854 = CARTESIAN_POINT ( 'NONE', ( 20.36373990196630100, 7.318137230057421200, -27.14551379312092600 ) ) ; +#4855 = AXIS2_PLACEMENT_3D ( 'NONE', #58396, #14868, #2068 ) ; +#4856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4858 = CIRCLE ( 'NONE', #33748, 10.50000000000009600 ) ; +#4859 = ORIENTED_EDGE ( 'NONE', *, *, #53565, .F. ) ; +#4860 = ORIENTED_EDGE ( 'NONE', *, *, #12357, .T. ) ; +#4861 = CARTESIAN_POINT ( 'NONE', ( 19.02580007208270600, 99.65160292443725600, -24.63615676076833700 ) ) ; +#4862 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4864 = AXIS2_PLACEMENT_3D ( 'NONE', #31926, #75435, #38141 ) ; +#4865 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416062900, 50.08874248361071600, -28.53740755999536200 ) ) ; +#4866 = AXIS2_PLACEMENT_3D ( 'NONE', #14909, #2368, #52129 ) ; +#4867 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 26.42318720225497600, -28.70555803802994200 ) ) ; +#4868 = ADVANCED_FACE ( 'NONE', ( #20133 ), #67278, .T. ) ; +#4869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4870 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#4871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4872 = FACE_OUTER_BOUND ( 'NONE', #62313, .T. ) ; +#4873 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 34.83333333333332100, -9.205558038030003900 ) ) ; +#4874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4875 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#4876 = ORIENTED_EDGE ( 'NONE', *, *, #78366, .T. ) ; +#4877 = ORIENTED_EDGE ( 'NONE', *, *, #27122, .T. ) ; +#4878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4879 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4880 = ADVANCED_FACE ( 'NONE', ( #3558 ), #65881, .F. ) ; +#4881 = AXIS2_PLACEMENT_3D ( 'NONE', #1490, #44972, #7735 ) ; +#4882 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4883 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540331000, 82.51973550835656100, -28.70555803803005900 ) ) ; +#4884 = CARTESIAN_POINT ( 'NONE', ( -5.650041828117439400, 57.15000000000005500, -8.831592934421399500 ) ) ; +#4885 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298131100, 85.79999999999998300, -28.70555803802997700 ) ) ; +#4886 = CONICAL_SURFACE ( 'NONE', #19010, 10.50000000000009200, 0.7853981633974482800 ) ; +#4887 = CARTESIAN_POINT ( 'NONE', ( -22.05568895182541700, 98.65568895182542500, -26.34001422571273200 ) ) ; +#4888 = ORIENTED_EDGE ( 'NONE', *, *, #49447, .T. ) ; +#4889 = ORIENTED_EDGE ( 'NONE', *, *, #76665, .F. ) ; +#4890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4891 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#4892 = ADVANCED_FACE ( 'NONE', ( #18171 ), #32757, .T. ) ; +#4894 = EDGE_CURVE ( 'NONE', #2887, #22570, #49280, .T. ) ; +#4893 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69204, #921, #19709, #63247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668632826200E-007, 0.0003940053330070053900 ), + .UNSPECIFIED. ) ; +#4895 = CONICAL_SURFACE ( 'NONE', #3178, 10.00000000000009200, 0.7853981633974447300 ) ; +#4896 = ORIENTED_EDGE ( 'NONE', *, *, #76661, .T. ) ; +#4897 = CARTESIAN_POINT ( 'NONE', ( -10.07349184251535600, 90.22161678501181800, -28.29547179040443400 ) ) ; +#4898 = AXIS2_PLACEMENT_3D ( 'NONE', #80585, #43301, #6065 ) ; +#4899 = ORIENTED_EDGE ( 'NONE', *, *, #75981, .F. ) ; +#4900 = ORIENTED_EDGE ( 'NONE', *, *, #80224, .T. ) ; +#4901 = CARTESIAN_POINT ( 'NONE', ( -9.219797288041373700, 32.09027028261147800, -28.70555803803065900 ) ) ; +#4902 = EDGE_LOOP ( 'NONE', ( #80128, #41690, #44271, #58780 ) ) ; +#4903 = ORIENTED_EDGE ( 'NONE', *, *, #35345, .T. ) ; +#4904 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35416, #72665, #47862, #10646 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967423900E-007, 0.0008724366121409681000 ), + .UNSPECIFIED. ) ; +#4905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4906 = ORIENTED_EDGE ( 'NONE', *, *, #6405, .T. ) ; +#4907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4908 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656954300, 70.65007990305426200, -28.43638873268704300 ) ) ; +#4909 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#4910 = ADVANCED_FACE ( 'NONE', ( #67820 ), #63927, .F. ) ; +#4911 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19078, #37832, #75385, #38093 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674160448900E-007, 0.0007987728781051989100 ), + .UNSPECIFIED. ) ; +#4912 = CIRCLE ( 'NONE', #33321, 9.500000000000099500 ) ; +#4913 = AXIS2_PLACEMENT_3D ( 'NONE', #19241, #25530, #56506 ) ; +#4914 = EDGE_LOOP ( 'NONE', ( #53449, #77089, #51904, #11592 ) ) ; +#4915 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199500, 60.34267608797601000, -28.20555803802997700 ) ) ; +#4916 = ORIENTED_EDGE ( 'NONE', *, *, #2299, .T. ) ; +#4917 = EDGE_LOOP ( 'NONE', ( #79873, #34873, #2070, #42246 ) ) ; +#4918 = ORIENTED_EDGE ( 'NONE', *, *, #23622, .F. ) ; +#4919 = EDGE_LOOP ( 'NONE', ( #61534, #48767, #5680, #67474, #50827 ) ) ; +#4920 = PLANE ( 'NONE', #61168 ) ; +#4921 = CONICAL_SURFACE ( 'NONE', #41007, 10.50000000000009600, 0.7853981633974518300 ) ; +#4922 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 3.333333333333343700, -5.535685056952199400 ) ) ; +#4923 = ORIENTED_EDGE ( 'NONE', *, *, #7592, .T. ) ; +#4924 = AXIS2_PLACEMENT_3D ( 'NONE', #38145, #75689, #69439 ) ; +#4925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2034, #57552, #8283, #51792 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605052394700, 0.004414112765716564400 ), + .UNSPECIFIED. ) ; +#4926 = CARTESIAN_POINT ( 'NONE', ( -11.51272810170980200, 71.47860083896993900, -28.56001287362840900 ) ) ; +#4927 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 14.05000000000000200, -28.20555803802992800 ) ) ; +#4928 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 43.50000000000002800, -7.061964498581016200 ) ) ; +#4929 = ORIENTED_EDGE ( 'NONE', *, *, #69874, .F. ) ; +#4930 = EDGE_CURVE ( 'NONE', #34020, #16205, #16230, .T. ) ; +#4931 = CIRCLE ( 'NONE', #34224, 10.00000000000009400 ) ; +#4932 = ORIENTED_EDGE ( 'NONE', *, *, #64071, .F. ) ; +#4933 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385200, 41.43650294695131500, -28.30782889147482400 ) ) ; +#4934 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000162500, 88.62623792124919900, -28.70555803803030800 ) ) ; +#4935 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 8.666666666666683800, 2.794441961969992100 ) ) ; +#4937 = ORIENTED_EDGE ( 'NONE', *, *, #56410, .F. ) ; +#4936 = CARTESIAN_POINT ( 'NONE', ( -9.487410011450967000, 90.12140959736001400, -28.55996453402213600 ) ) ; +#4938 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020500, 65.79999999999950000, -28.70555803803047500 ) ) ; +#4939 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64444, #20906, #33400, #76915 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397408200, 0.001517194977238176800 ), + .UNSPECIFIED. ) ; +#4940 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4941 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#4942 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034432000, 41.67701665379240000, -28.20555803802997400 ) ) ; +#4943 = CARTESIAN_POINT ( 'NONE', ( -15.31403449022168300, 45.54999999999998300, -28.37321477197630800 ) ) ; +#4944 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 61.22294471194857800, -28.20555803803047800 ) ) ; +#4945 = EDGE_CURVE ( 'NONE', #40181, #76937, #14447, .T. ) ; +#4946 = EDGE_CURVE ( 'NONE', #69684, #16848, #80755, .T. ) ; +#4947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#4948 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4949 = ORIENTED_EDGE ( 'NONE', *, *, #72276, .T. ) ; +#4950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4951 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4952 = ORIENTED_EDGE ( 'NONE', *, *, #76195, .T. ) ; +#4953 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198588800, 80.90033558196111600, -28.70555803802997700 ) ) ; +#4954 = EDGE_LOOP ( 'NONE', ( #8656, #52966, #76627 ) ) ; +#4955 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 5.000000000000000000, -1.205558038030003500 ) ) ; +#4956 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823703100, 48.69543746431602900, -28.61277292027075300 ) ) ; +#4957 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#4958 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 89.91070809551058600, -28.20555803802997700 ) ) ; +#4959 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306343500, 31.09789380924876700, -28.25343951603342800 ) ) ; +#4960 = AXIS2_PLACEMENT_3D ( 'NONE', #4211, #47703, #10486 ) ; +#4961 = EDGE_CURVE ( 'NONE', #45374, #43908, #80461, .T. ) ; +#4962 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4963 = EDGE_CURVE ( 'NONE', #2617, #39034, #24042, .T. ) ; +#4964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4965 = EDGE_CURVE ( 'NONE', #60743, #69853, #66311, .T. ) ; +#4966 = CONICAL_SURFACE ( 'NONE', #71091, 10.50000000000009600, 0.7853981633974518300 ) ; +#4967 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 52.18315603019283300, -28.70555803802999500 ) ) ; +#4968 = EDGE_LOOP ( 'NONE', ( #66374, #10941, #69966, #42083 ) ) ; +#4969 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993400, 77.22261628933213700, -28.70555803803047500 ) ) ; +#4970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4971 = ORIENTED_EDGE ( 'NONE', *, *, #65400, .T. ) ; +#4972 = AXIS2_PLACEMENT_3D ( 'NONE', #14983, #2183, #33753 ) ; +#4973 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528178400, 49.63131911501876200, -28.51286550264510900 ) ) ; +#4974 = ORIENTED_EDGE ( 'NONE', *, *, #53646, .T. ) ; +#4975 = CONICAL_SURFACE ( 'NONE', #59444, 10.50000000000009900, 0.7853981633974518300 ) ; +#4976 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804094500, 63.65857157145661200, -28.37229765499311500 ) ) ; +#4977 = ORIENTED_EDGE ( 'NONE', *, *, #11549, .F. ) ; +#4979 = ORIENTED_EDGE ( 'NONE', *, *, #72915, .T. ) ; +#4978 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4980 = EDGE_LOOP ( 'NONE', ( #63381, #24231, #9242, #57278 ) ) ; +#4981 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 77.94142842854297700, -28.20555803802997700 ) ) ; +#4982 = VERTEX_POINT ( 'NONE', #68334 ) ; +#4983 = AXIS2_PLACEMENT_3D ( 'NONE', #2961, #58994, #21749 ) ; +#4984 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#4985 = AXIS2_PLACEMENT_3D ( 'NONE', #77478, #40202, #2943 ) ; +#4986 = CONICAL_SURFACE ( 'NONE', #21342, 10.50000000000009600, 0.7853981633974500600 ) ; +#4987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4989 = EDGE_LOOP ( 'NONE', ( #11098, #69038, #50426, #71070, #80521 ) ) ; +#4990 = FACE_OUTER_BOUND ( 'NONE', #2723, .T. ) ; +#4991 = VERTEX_POINT ( 'NONE', #49798 ) ; +#4992 = ORIENTED_EDGE ( 'NONE', *, *, #42625, .F. ) ; +#4993 = EDGE_LOOP ( 'NONE', ( #53202, #41866, #22173 ) ) ; +#4994 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280154400, 60.69966441803944000, -28.70555803803047500 ) ) ; +#4995 = ORIENTED_EDGE ( 'NONE', *, *, #21011, .F. ) ; +#4996 = ORIENTED_EDGE ( 'NONE', *, *, #37223, .F. ) ; +#4997 = ORIENTED_EDGE ( 'NONE', *, *, #59535, .T. ) ; +#4998 = ADVANCED_FACE ( 'NONE', ( #1604 ), #61979, .T. ) ; +#4999 = CONICAL_SURFACE ( 'NONE', #58154, 10.50000000000009600, 0.7853981633974500600 ) ; +#5000 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 49.50000000000002100, -7.061964498581022400 ) ) ; +#5001 = AXIS2_PLACEMENT_3D ( 'NONE', #68323, #31086, #74597 ) ; +#5002 = EDGE_CURVE ( 'NONE', #8772, #59944, #51791, .T. ) ; +#5003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5006 = ADVANCED_FACE ( 'NONE', ( #14275 ), #28920, .T. ) ; +#5007 = ORIENTED_EDGE ( 'NONE', *, *, #38405, .T. ) ; +#5009 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60619, #17095, #23349, #66868 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866729500700E-007, 0.001052545149297038500 ), + .UNSPECIFIED. ) ; +#5008 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#5010 = CONICAL_SURFACE ( 'NONE', #52909, 10.00000000000009200, 0.7853981633974447300 ) ; +#5012 = ORIENTED_EDGE ( 'NONE', *, *, #65161, .F. ) ; +#5011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5013 = EDGE_CURVE ( 'NONE', #30222, #77938, #37332, .T. ) ; +#5014 = AXIS2_PLACEMENT_3D ( 'NONE', #76539, #2014, #70287 ) ; +#5015 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#5016 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16614, #47580, #22868, #66393 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258252622800E-007, 0.0004559721491999606700 ), + .UNSPECIFIED. ) ; +#5017 = CARTESIAN_POINT ( 'NONE', ( 17.03177803894799100, 70.28233213024610400, -28.25051428653880200 ) ) ; +#5018 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5019 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 81.52858243452105600, -28.70555803802997700 ) ) ; +#5020 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 20.83333333333333600, 9.794441961969999600 ) ) ; +#5021 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432826800, 9.746602415621900700, -28.20555803802992800 ) ) ; +#5022 = AXIS2_PLACEMENT_3D ( 'NONE', #36952, #80500, #43205 ) ; +#5023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5024 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5025 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40770, #78049, #59563, #22288 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610521300, 0.0004765929656968617400 ), + .UNSPECIFIED. ) ; +#5026 = EDGE_LOOP ( 'NONE', ( #49895, #6925, #59415, #15399 ) ) ; +#5027 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671995000, 79.66414768974078700, -28.38420446581270100 ) ) ; +#5028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5031 = EDGE_LOOP ( 'NONE', ( #35973, #22420, #62663, #40940 ) ) ; +#5030 = CARTESIAN_POINT ( 'NONE', ( 5.100117264795599700, 14.04999999999951800, -28.53808257741963300 ) ) ; +#5032 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274312900, 53.66464174796033900, -28.53896444442226600 ) ) ; +#5033 = AXIS2_PLACEMENT_3D ( 'NONE', #4044, #10309, #41302 ) ; +#5034 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12651, #6114, #37347, #56133 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276984628300E-007, 0.0007677744771234620900 ), + .UNSPECIFIED. ) ; +#5035 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510618300, 9.940690926013793700, -28.35186440610865300 ) ) ; +#5036 = CIRCLE ( 'NONE', #24164, 10.00000000000009400 ) ; +#5037 = EDGE_LOOP ( 'NONE', ( #16122, #20541, #21165 ) ) ; +#5038 = PLANE ( 'NONE', #27947 ) ; +#5040 = EDGE_CURVE ( 'NONE', #20464, #41582, #34733, .T. ) ; +#5039 = ORIENTED_EDGE ( 'NONE', *, *, #51730, .F. ) ; +#5041 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 55.33333333333334300, -5.535685056952199400 ) ) ; +#5042 = CARTESIAN_POINT ( 'NONE', ( 20.02428459401456000, 7.487857702993078800, -27.37358685260305400 ) ) ; +#5043 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 63.42856308690588900, -28.36981695106780800 ) ) ; +#5044 = FACE_OUTER_BOUND ( 'NONE', #34348, .T. ) ; +#5045 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583919800, 29.08874248361071600, -28.53740755999534400 ) ) ; +#5046 = ORIENTED_EDGE ( 'NONE', *, *, #62065, .T. ) ; +#5047 = ORIENTED_EDGE ( 'NONE', *, *, #12241, .F. ) ; +#5048 = ORIENTED_EDGE ( 'NONE', *, *, #58475, .F. ) ; +#5049 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345436300, 80.27440177985818100, -28.29986836858018900 ) ) ; +#5050 = ORIENTED_EDGE ( 'NONE', *, *, #65614, .T. ) ; +#5051 = CARTESIAN_POINT ( 'NONE', ( -5.060928057032790600, 10.00000000000006900, -28.70555803802998100 ) ) ; +#5052 = CIRCLE ( 'NONE', #25997, 10.00000000000009600 ) ; +#5053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5054 = CARTESIAN_POINT ( 'NONE', ( 17.04026895850630300, 9.875614624812472500, -28.30309985153378300 ) ) ; +#5055 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5057 = ORIENTED_EDGE ( 'NONE', *, *, #19873, .T. ) ; +#5058 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 60.51916201875669500, -28.45106778992438000 ) ) ; +#5059 = EDGE_LOOP ( 'NONE', ( #11163, #20574, #18564 ) ) ; +#5060 = CARTESIAN_POINT ( 'NONE', ( -2.997978530266225800, 49.78907435382949100, -28.25433648786267300 ) ) ; +#5061 = CARTESIAN_POINT ( 'NONE', ( -3.360497072202802900, 20.43250300240229600, -28.25438406275897000 ) ) ; +#5062 = EDGE_CURVE ( 'NONE', #63365, #5879, #22913, .T. ) ; +#5063 = CIRCLE ( 'NONE', #34290, 10.00000000000009600 ) ; +#5064 = CARTESIAN_POINT ( 'NONE', ( -15.16868429911840200, 23.19769540679922700, -28.70555803803001600 ) ) ; +#5065 = ORIENTED_EDGE ( 'NONE', *, *, #55810, .T. ) ; +#5066 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857315100, 33.17681279774500100, -28.70555803802996700 ) ) ; +#5067 = ORIENTED_EDGE ( 'NONE', *, *, #37955, .F. ) ; +#5068 = EDGE_CURVE ( 'NONE', #70561, #62206, #30836, .T. ) ; +#5069 = ORIENTED_EDGE ( 'NONE', *, *, #63018, .T. ) ; +#5070 = VERTEX_POINT ( 'NONE', #25652 ) ; +#5071 = ORIENTED_EDGE ( 'NONE', *, *, #13093, .T. ) ; +#5072 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 16.17143691309412600, -28.36981695106778600 ) ) ; +#5073 = CIRCLE ( 'NONE', #59624, 10.50000000000009600 ) ; +#5074 = ORIENTED_EDGE ( 'NONE', *, *, #64983, .T. ) ; +#5075 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#5076 = FACE_OUTER_BOUND ( 'NONE', #60917, .T. ) ; +#5077 = AXIS2_PLACEMENT_3D ( 'NONE', #66401, #29186, #72660 ) ; +#5078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5079 = EDGE_CURVE ( 'NONE', #17209, #25124, #51208, .T. ) ; +#5080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5081 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000038600, 71.25489551879185500, -28.37193179497714000 ) ) ; +#5082 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57760, #8221, #14515, #58027 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807101500, 0.0005317208426584783300 ), + .UNSPECIFIED. ) ; +#5083 = ADVANCED_FACE ( 'NONE', ( #47320 ), #19368, .T. ) ; +#5084 = ORIENTED_EDGE ( 'NONE', *, *, #33425, .F. ) ; +#5085 = EDGE_CURVE ( 'NONE', #31405, #37106, #12339, .T. ) ; +#5086 = AXIS2_PLACEMENT_3D ( 'NONE', #18645, #62169, #24908 ) ; +#5087 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5088 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 61.35277818615383400, -28.70555803803016200 ) ) ; +#5089 = FACE_OUTER_BOUND ( 'NONE', #19669, .T. ) ; +#5090 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#5091 = EDGE_LOOP ( 'NONE', ( #2555, #21327, #44084 ) ) ; +#5092 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 61.66666666666668600, 4.294441961969993400 ) ) ; +#5093 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671653500, 61.93585231025939200, -28.38420446581302100 ) ) ; +#5094 = ADVANCED_FACE ( 'NONE', ( #45359 ), #32159, .T. ) ; +#5095 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 26.83333333333333600, -2.545304000185615800 ) ) ; +#5096 = AXIS2_PLACEMENT_3D ( 'NONE', #62008, #80497, #24727 ) ; +#5097 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333400, 35.05000000000001800, -28.70555803802995200 ) ) ; +#5098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5099 = EDGE_CURVE ( 'NONE', #39151, #57912, #8427, .T. ) ; +#5100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5101 = EDGE_CURVE ( 'NONE', #30155, #57461, #74779, .T. ) ; +#5102 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 15.22261628933270000, -28.70555803802992800 ) ) ; +#5103 = AXIS2_PLACEMENT_3D ( 'NONE', #71406, #34147, #77663 ) ; +#5104 = CARTESIAN_POINT ( 'NONE', ( -15.02341999935003300, 9.953160001299924200, -28.70555803803000900 ) ) ; +#5105 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 29.16666666666667100, -4.152999154772358800 ) ) ; +#5106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5107 = ORIENTED_EDGE ( 'NONE', *, *, #43783, .T. ) ; +#5108 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#5109 = CARTESIAN_POINT ( 'NONE', ( -3.935444260774973600, 90.09037803491503400, -28.29483400905891000 ) ) ; +#5110 = ORIENTED_EDGE ( 'NONE', *, *, #15329, .F. ) ; +#5111 = EDGE_CURVE ( 'NONE', #51448, #7884, #60028, .T. ) ; +#5112 = AXIS2_PLACEMENT_3D ( 'NONE', #10712, #54203, #16964 ) ; +#5113 = AXIS2_PLACEMENT_3D ( 'NONE', #14338, #57852, #20602 ) ; +#5114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5115 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629000, 38.92298334620784300, -28.20555803802995200 ) ) ; +#5116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5117 = VERTEX_POINT ( 'NONE', #69671 ) ; +#5118 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003600, 81.25489551879256600, -28.37193179497648300 ) ) ; +#5119 = ADVANCED_FACE ( 'NONE', ( #78531 ), #41498, .T. ) ; +#5120 = CARTESIAN_POINT ( 'NONE', ( 11.50207502155157800, 50.60145251508568300, -28.70555803803030800 ) ) ; +#5121 = CIRCLE ( 'NONE', #3761, 10.50000000000009600 ) ; +#5122 = ORIENTED_EDGE ( 'NONE', *, *, #49976, .T. ) ; +#5123 = CONICAL_SURFACE ( 'NONE', #17531, 10.00000000000009400, 0.7853981633974447300 ) ; +#5124 = EDGE_LOOP ( 'NONE', ( #60819, #72976, #31096, #24358 ) ) ; +#5125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5127 = EDGE_LOOP ( 'NONE', ( #24266, #60450, #52010 ) ) ; +#5128 = CONICAL_SURFACE ( 'NONE', #68413, 10.50000000000009600, 0.7853981633974500600 ) ; +#5129 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5130 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53834, #60117, #10600, #54098 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867055673000E-007, 0.001076778502991278900 ), + .UNSPECIFIED. ) ; +#5131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5132 = VERTEX_POINT ( 'NONE', #45144 ) ; +#5133 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5134 = CARTESIAN_POINT ( 'NONE', ( 17.82843795083941900, 97.25687614973898600, -26.95175924719062300 ) ) ; +#5135 = EDGE_LOOP ( 'NONE', ( #8552, #30381, #3255, #61265 ) ) ; +#5136 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#5137 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#5138 = VERTEX_POINT ( 'NONE', #7910 ) ; +#5139 = CARTESIAN_POINT ( 'NONE', ( 9.279102202939139200, 81.50050326225941400, -28.63287226700146000 ) ) ; +#5140 = CONICAL_SURFACE ( 'NONE', #5602, 10.50000000000009800, 0.7853981633974518300 ) ; +#5141 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223633900, 59.83407839971530300, -28.37510699173776300 ) ) ; +#5142 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374510200, 30.05638278624888900, -28.44857805373787600 ) ) ; +#5143 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 65.79999999999982700, -28.20555803803014400 ) ) ; +#5144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5145 = EDGE_LOOP ( 'NONE', ( #67562, #18718, #23413, #42989, #48382 ) ) ; +#5146 = AXIS2_PLACEMENT_3D ( 'NONE', #63507, #26250, #69729 ) ; +#5147 = FACE_OUTER_BOUND ( 'NONE', #63192, .T. ) ; +#5148 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 32.66666666666667900, 5.722645192245505700 ) ) ; +#5149 = EDGE_LOOP ( 'NONE', ( #44182, #5981, #51598 ) ) ; +#5150 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 60.16054007504465100, -28.34042301926881200 ) ) ; +#5151 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819206200, 59.94924284854685900, -28.20555803802997700 ) ) ; +#5152 = EDGE_LOOP ( 'NONE', ( #57199, #62402, #42667 ) ) ; +#5153 = ORIENTED_EDGE ( 'NONE', *, *, #12709, .F. ) ; +#5154 = CIRCLE ( 'NONE', #47536, 10.00000000000009200 ) ; +#5155 = ORIENTED_EDGE ( 'NONE', *, *, #8366, .T. ) ; +#5156 = CIRCLE ( 'NONE', #34096, 10.00000000000009400 ) ; +#5157 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507555000, 30.39456479767167000, -28.70555803802995200 ) ) ; +#5158 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.737967874686777500, -28.38801640354855500 ) ) ; +#5159 = AXIS2_PLACEMENT_3D ( 'NONE', #34167, #2876, #71425 ) ; +#5160 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5161 = ORIENTED_EDGE ( 'NONE', *, *, #4486, .T. ) ; +#5162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5163 = CARTESIAN_POINT ( 'NONE', ( 2.990517090606612500, 57.14999999999999900, -9.948679038391620800 ) ) ; +#5164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71534, #34278, #9502, #53011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881206273756600E-007, 0.0008724366121410591800 ), + .UNSPECIFIED. ) ; +#5165 = EDGE_CURVE ( 'NONE', #53551, #73384, #76535, .T. ) ; +#5166 = ORIENTED_EDGE ( 'NONE', *, *, #33336, .T. ) ; +#5167 = ORIENTED_EDGE ( 'NONE', *, *, #48408, .F. ) ; +#5168 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011400, 55.67652461702001400, -28.70555803803014400 ) ) ; +#5169 = AXIS2_PLACEMENT_3D ( 'NONE', #40100, #52872, #77634 ) ; +#5170 = CIRCLE ( 'NONE', #31501, 9.500000000000097700 ) ; +#5171 = ORIENTED_EDGE ( 'NONE', *, *, #62824, .F. ) ; +#5172 = FACE_OUTER_BOUND ( 'NONE', #24830, .T. ) ; +#5173 = CARTESIAN_POINT ( 'NONE', ( -3.976840323493583200, 20.51912043132478300, -28.30223257055572000 ) ) ; +#5174 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#5175 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 46.48096581827314100, -28.69431509262337700 ) ) ; +#5176 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 4.999999999999997300, 8.794441961969976500 ) ) ; +#5177 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 30.56914835874665600, -28.45573375118225500 ) ) ; +#5178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5179 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76428, #20428, #1898, #45391 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217707473733300E-007, 0.0008482615949368277800 ), + .UNSPECIFIED. ) ; +#5180 = ADVANCED_FACE ( 'NONE', ( #58053 ), #72672, .F. ) ; +#5181 = EDGE_CURVE ( 'NONE', #30550, #72435, #8378, .T. ) ; +#5182 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#5183 = EDGE_CURVE ( 'NONE', #48493, #16467, #74613, .T. ) ; +#5184 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#5185 = VERTEX_POINT ( 'NONE', #76457 ) ; +#5186 = ADVANCED_FACE ( 'NONE', ( #24960 ), #6455, .F. ) ; +#5187 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 1.166666666666676300, 3.794441961969996900 ) ) ; +#5188 = ORIENTED_EDGE ( 'NONE', *, *, #16679, .F. ) ; +#5189 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5190 = EDGE_CURVE ( 'NONE', #69491, #20847, #23018, .T. ) ; +#5191 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736700200, 14.05000000000000200, -28.70555803802992800 ) ) ; +#5192 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 41.33333333333335700, 5.722645192245503900 ) ) ; +#5193 = EDGE_CURVE ( 'NONE', #27550, #52871, #39549, .T. ) ; +#5194 = CIRCLE ( 'NONE', #26671, 9.500000000000097700 ) ; +#5195 = ORIENTED_EDGE ( 'NONE', *, *, #47247, .F. ) ; +#5196 = AXIS2_PLACEMENT_3D ( 'NONE', #63439, #19917, #50872 ) ; +#5197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5198 = FACE_OUTER_BOUND ( 'NONE', #43699, .T. ) ; +#5199 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#5200 = EDGE_LOOP ( 'NONE', ( #36768, #288, #41836 ) ) ; +#5201 = ADVANCED_FACE ( 'NONE', ( #56096 ), #21083, .F. ) ; +#5202 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#5203 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#5204 = FACE_OUTER_BOUND ( 'NONE', #66218, .T. ) ; +#5205 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 6.500000000000017800, -7.061964498581016200 ) ) ; +#5206 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7174, #75466, #63252, #25989 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880078041704900E-007, 0.0003101809493099006700 ), + .UNSPECIFIED. ) ; +#5207 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#5208 = VERTEX_POINT ( 'NONE', #45966 ) ; +#5209 = VERTEX_POINT ( 'NONE', #8710 ) ; +#5210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5211 = AXIS2_PLACEMENT_3D ( 'NONE', #28861, #53559, #41306 ) ; +#5212 = EDGE_CURVE ( 'NONE', #16630, #6871, #60336, .T. ) ; +#5213 = EDGE_CURVE ( 'NONE', #40378, #3197, #45804, .T. ) ; +#5214 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5215 = EDGE_CURVE ( 'NONE', #66358, #35472, #54133, .T. ) ; +#5216 = ADVANCED_FACE ( 'NONE', ( #4505 ), #35670, .F. ) ; +#5217 = CARTESIAN_POINT ( 'NONE', ( 15.42159809000304800, 38.69142961419054000, -28.69910740970346600 ) ) ; +#5219 = FACE_OUTER_BOUND ( 'NONE', #51711, .T. ) ; +#5218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5221 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5222 = ORIENTED_EDGE ( 'NONE', *, *, #40792, .T. ) ; +#5223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5224 = FACE_OUTER_BOUND ( 'NONE', #22554, .T. ) ; +#5225 = AXIS2_PLACEMENT_3D ( 'NONE', #19081, #62614, #25361 ) ; +#5226 = ORIENTED_EDGE ( 'NONE', *, *, #80362, .F. ) ; +#5227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5228 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5229 = VERTEX_POINT ( 'NONE', #4360 ) ; +#5230 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5231 = ORIENTED_EDGE ( 'NONE', *, *, #42488, .F. ) ; +#5232 = AXIS2_PLACEMENT_3D ( 'NONE', #76996, #39729, #2450 ) ; +#5233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5234 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#5235 = EDGE_LOOP ( 'NONE', ( #8313, #7388, #70056, #75863 ) ) ; +#5236 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#5237 = EDGE_CURVE ( 'NONE', #28951, #60031, #31401, .T. ) ; +#5238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5239 = CONICAL_SURFACE ( 'NONE', #38698, 10.50000000000009600, 0.7853981633974500600 ) ; +#5240 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#5241 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#5242 = AXIS2_PLACEMENT_3D ( 'NONE', #14487, #58011, #20754 ) ; +#5243 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 9.940690926013784800, -28.35186440610855700 ) ) ; +#5244 = AXIS2_PLACEMENT_3D ( 'NONE', #77035, #2487, #39213 ) ; +#5245 = ORIENTED_EDGE ( 'NONE', *, *, #39118, .T. ) ; +#5246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5247 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#5248 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#5249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5250 = ORIENTED_EDGE ( 'NONE', *, *, #6089, .T. ) ; +#5251 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#5252 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965400, 39.15930907398619400, -28.35186440610857500 ) ) ; +#5253 = ORIENTED_EDGE ( 'NONE', *, *, #80754, .F. ) ; +#5254 = CONICAL_SURFACE ( 'NONE', #58598, 10.50000000000009800, 0.7853981633974518300 ) ; +#5255 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5256 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 30.74660241562181900, -28.20555803802995200 ) ) ; +#5257 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985125600, 15.00238095238065100, -28.70555803802992800 ) ) ; +#5258 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000014200, 11.47376207875059400, -28.70555803802994200 ) ) ; +#5259 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5260 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66752, #23226, #35737, #79258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388697529300E-007, 0.0007987676590766449600 ), + .UNSPECIFIED. ) ; +#5261 = AXIS2_PLACEMENT_3D ( 'NONE', #42274, #54797, #79571 ) ; +#5262 = CONICAL_SURFACE ( 'NONE', #38252, 10.50000000000009600, 0.7853981633974500600 ) ; +#5263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5264 = ORIENTED_EDGE ( 'NONE', *, *, #69647, .F. ) ; +#5265 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 47.33333333333333600, 2.794441961969998300 ) ) ; +#5266 = AXIS2_PLACEMENT_3D ( 'NONE', #76503, #39236, #1971 ) ; +#5267 = EDGE_LOOP ( 'NONE', ( #15289, #53451, #77013, #34023 ) ) ; +#5268 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5269 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 27.12623792124938800, -28.70555803802994200 ) ) ; +#5271 = ORIENTED_EDGE ( 'NONE', *, *, #41739, .T. ) ; +#5270 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5272 = ADVANCED_FACE ( 'NONE', ( #10380 ), #2529, .F. ) ; +#5273 = EDGE_CURVE ( 'NONE', #29021, #31068, #19099, .T. ) ; +#5274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5275 = FACE_OUTER_BOUND ( 'NONE', #16907, .T. ) ; +#5276 = ORIENTED_EDGE ( 'NONE', *, *, #74928, .F. ) ; +#5277 = FACE_OUTER_BOUND ( 'NONE', #25334, .T. ) ; +#5278 = AXIS2_PLACEMENT_3D ( 'NONE', #46139, #70918, #8881 ) ; +#5279 = VERTEX_POINT ( 'NONE', #66661 ) ; +#5280 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5281 = VERTEX_POINT ( 'NONE', #29435 ) ; +#5282 = CONICAL_SURFACE ( 'NONE', #6814, 10.50000000000009600, 0.7853981633974500600 ) ; +#5283 = CIRCLE ( 'NONE', #68482, 10.00000000000009600 ) ; +#5284 = ORIENTED_EDGE ( 'NONE', *, *, #22600, .F. ) ; +#5285 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#5286 = ORIENTED_EDGE ( 'NONE', *, *, #5979, .T. ) ; +#5287 = VERTEX_POINT ( 'NONE', #35658 ) ; +#5288 = ADVANCED_FACE ( 'NONE', ( #70684 ), #33700, .F. ) ; +#5289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5292 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 18.66666666666667100, -10.73183747965883100 ) ) ; +#5293 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#5294 = FACE_OUTER_BOUND ( 'NONE', #38908, .T. ) ; +#5295 = VERTEX_POINT ( 'NONE', #66925 ) ; +#5296 = FACE_OUTER_BOUND ( 'NONE', #18277, .T. ) ; +#5297 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5298 = EDGE_CURVE ( 'NONE', #33226, #79184, #52163, .T. ) ; +#5299 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .F. ) ; +#5300 = ADVANCED_FACE ( 'NONE', ( #26932 ), #64879, .F. ) ; +#5301 = VERTEX_POINT ( 'NONE', #17420 ) ; +#5303 = EDGE_CURVE ( 'NONE', #28981, #46326, #68746, .T. ) ; +#5302 = EDGE_LOOP ( 'NONE', ( #41454, #9222, #3800, #20547 ) ) ; +#5304 = EDGE_LOOP ( 'NONE', ( #75086, #78417, #41808, #25315, #4272 ) ) ; +#5305 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20719, #57967, #70468, #33215 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202211249000E-007, 0.0008724366121407015000 ), + .UNSPECIFIED. ) ; +#5306 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#5307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5308 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057900, 61.46283204837340700, -28.48697406221668200 ) ) ; +#5309 = ORIENTED_EDGE ( 'NONE', *, *, #59162, .T. ) ; +#5310 = CIRCLE ( 'NONE', #12671, 10.00000000000009200 ) ; +#5311 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583935800, 29.08874248361071600, -28.53740755999534400 ) ) ; +#5312 = ORIENTED_EDGE ( 'NONE', *, *, #74376, .F. ) ; +#5313 = EDGE_CURVE ( 'NONE', #53406, #17037, #37575, .T. ) ; +#5314 = ADVANCED_FACE ( 'NONE', ( #592 ), #54669, .T. ) ; +#5315 = EDGE_CURVE ( 'NONE', #46685, #10766, #16933, .T. ) ; +#5316 = VERTEX_POINT ( 'NONE', #5442 ) ; +#5317 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448975300, 50.16666666666666400, -9.205558038030005700 ) ) ; +#5318 = ORIENTED_EDGE ( 'NONE', *, *, #67860, .F. ) ; +#5319 = AXIS2_PLACEMENT_3D ( 'NONE', #65202, #27943, #71416 ) ; +#5320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5321 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5322 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 53.16666666666667900, 3.794441961969996900 ) ) ; +#5323 = VERTEX_POINT ( 'NONE', #42678 ) ; +#5324 = EDGE_CURVE ( 'NONE', #80471, #12648, #2438, .T. ) ; +#5325 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5327 = VERTEX_POINT ( 'NONE', #67723 ) ; +#5328 = LINE ( 'NONE', #72686, #36451 ) ; +#5329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5332 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 90.34267608797600200, -28.20555803802997700 ) ) ; +#5333 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#5334 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105225300, 70.28233213024609000, -28.25051428653889100 ) ) ; +#5335 = AXIS2_PLACEMENT_3D ( 'NONE', #11165, #79683, #67180 ) ; +#5336 = CARTESIAN_POINT ( 'NONE', ( -2.497924978448516200, 50.60145251508603800, -28.70555803802997700 ) ) ; +#5337 = EDGE_CURVE ( 'NONE', #79056, #75109, #68783, .T. ) ; +#5338 = CARTESIAN_POINT ( 'NONE', ( -16.62514415533942400, 9.187427922330284600, -28.57261973208899500 ) ) ; +#5339 = EDGE_CURVE ( 'NONE', #74631, #75589, #54317, .T. ) ; +#5340 = EDGE_CURVE ( 'NONE', #69152, #71340, #66799, .T. ) ; +#5341 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511867800, 59.60439022488333900, -28.70555803802997700 ) ) ; +#5342 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343284300, 9.746602415621378400, -28.20555803803042500 ) ) ; +#5343 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898061800, 18.38105266879267000, -28.33409528117008600 ) ) ; +#5344 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5345 = AXIS2_PLACEMENT_3D ( 'NONE', #50966, #13777, #57258 ) ; +#5346 = FACE_OUTER_BOUND ( 'NONE', #36753, .T. ) ; +#5347 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5348 = CARTESIAN_POINT ( 'NONE', ( -3.073496928715791400, 81.37839075872575700, -28.29547734244348000 ) ) ; +#5349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5350 = VERTEX_POINT ( 'NONE', #18222 ) ; +#5351 = ORIENTED_EDGE ( 'NONE', *, *, #14604, .F. ) ; +#5352 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541800, 80.58127875436079500, -28.53757464917570300 ) ) ; +#5353 = FACE_OUTER_BOUND ( 'NONE', #73678, .T. ) ; +#5354 = AXIS2_PLACEMENT_3D ( 'NONE', #42088, #66883, #79397 ) ; +#5355 = AXIS2_PLACEMENT_3D ( 'NONE', #36517, #42773, #73808 ) ; +#5357 = ORIENTED_EDGE ( 'NONE', *, *, #49939, .T. ) ; +#5356 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5358 = CARTESIAN_POINT ( 'NONE', ( 3.976840323493587600, 31.01912043132477600, -28.30223257055573800 ) ) ; +#5359 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2739, #46252, #21563, #65087 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001043664170964443900 ), + .UNSPECIFIED. ) ; +#5360 = FACE_OUTER_BOUND ( 'NONE', #41279, .T. ) ; +#5361 = CIRCLE ( 'NONE', #2240, 10.50000000000009600 ) ; +#5362 = ORIENTED_EDGE ( 'NONE', *, *, #69967, .T. ) ; +#5363 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188303900, 9.894351187922408600, -28.41114655922288500 ) ) ; +#5364 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 59.50000000000002100, -9.258116921287651700 ) ) ; +#5365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74333, #43277, #62085, #24814 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003593416339764630200, 0.0005041857630952008400 ), + .UNSPECIFIED. ) ; +#5366 = CONICAL_SURFACE ( 'NONE', #19818, 10.00000000000009400, 0.7853981633974447300 ) ; +#5367 = ORIENTED_EDGE ( 'NONE', *, *, #54809, .F. ) ; +#5368 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5369 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34171, #46361, #3137, #46648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167599800 ), + .UNSPECIFIED. ) ; +#5370 = ORIENTED_EDGE ( 'NONE', *, *, #14997, .T. ) ; +#5371 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 24.66666666666668900, 1.294441961969997200 ) ) ; +#5372 = AXIS2_PLACEMENT_3D ( 'NONE', #17160, #29702, #48393 ) ; +#5373 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 70.69966441803892100, -28.70555803802997700 ) ) ; +#5374 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051555100, 51.01872124563911400, -28.53757464917582400 ) ) ; +#5375 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41151, #78433, #3869, #47366 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572859900, 0.0008043487657984325700 ), + .UNSPECIFIED. ) ; +#5376 = CIRCLE ( 'NONE', #21100, 10.00000000000009200 ) ; +#5377 = AXIS2_PLACEMENT_3D ( 'NONE', #78780, #35265, #53727 ) ; +#5378 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498188500, 49.49827085154639400, -28.24094723680244100 ) ) ; +#5379 = VERTEX_POINT ( 'NONE', #43218 ) ; +#5380 = CIRCLE ( 'NONE', #23707, 10.50000000000009600 ) ; +#5381 = EDGE_LOOP ( 'NONE', ( #10715, #57712, #21163, #71121 ) ) ; +#5382 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5383 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 81.46283204837340000, -28.48697406221667100 ) ) ; +#5384 = EDGE_CURVE ( 'NONE', #74152, #67971, #39847, .T. ) ; +#5385 = VERTEX_POINT ( 'NONE', #18483 ) ; +#5386 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 27.00000000000001800, -1.205558038030002800 ) ) ; +#5387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5388 = AXIS2_PLACEMENT_3D ( 'NONE', #12266, #68273, #80527 ) ; +#5389 = ORIENTED_EDGE ( 'NONE', *, *, #33317, .F. ) ; +#5390 = PLANE ( 'NONE', #42552 ) ; +#5391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#5392 = ORIENTED_EDGE ( 'NONE', *, *, #39799, .T. ) ; +#5393 = FACE_OUTER_BOUND ( 'NONE', #44747, .T. ) ; +#5394 = EDGE_LOOP ( 'NONE', ( #52745, #62198, #36257, #47651 ) ) ; +#5395 = ORIENTED_EDGE ( 'NONE', *, *, #34799, .T. ) ; +#5396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5397 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#5398 = EDGE_LOOP ( 'NONE', ( #48621, #35665, #904 ) ) ; +#5399 = CARTESIAN_POINT ( 'NONE', ( -17.06616028005486600, 21.50593028296449900, -28.49013149708291300 ) ) ; +#5400 = ORIENTED_EDGE ( 'NONE', *, *, #53221, .T. ) ; +#5401 = CIRCLE ( 'NONE', #32623, 9.500000000000099500 ) ; +#5402 = AXIS2_PLACEMENT_3D ( 'NONE', #53660, #16413, #59941 ) ; +#5403 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5404 = ORIENTED_EDGE ( 'NONE', *, *, #70825, .F. ) ; +#5405 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5406 = ORIENTED_EDGE ( 'NONE', *, *, #27249, .F. ) ; +#5407 = ADVANCED_FACE ( 'NONE', ( #31760 ), #46302, .T. ) ; +#5408 = FACE_OUTER_BOUND ( 'NONE', #70365, .T. ) ; +#5409 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5410 = CARTESIAN_POINT ( 'NONE', ( 10.98574357684228900, 81.58004100757868600, -28.24987021275328300 ) ) ; +#5411 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5412 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5414 = ADVANCED_FACE ( 'NONE', ( #17171 ), #13274, .F. ) ; +#5415 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042233400, 17.00972971738951900, -28.70555803803014800 ) ) ; +#5416 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877866600, 18.57332680091207400, -28.37233769390152800 ) ) ; +#5417 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42063, #79354, #60867, #23603 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.732189474663471200E-017, 0.001246264537621117900 ), + .UNSPECIFIED. ) ; +#5418 = ADVANCED_FACE ( 'NONE', ( #62917 ), #60958, .T. ) ; +#5419 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#5420 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471864200, 20.46868088498121800, -28.51286550264509900 ) ) ; +#5421 = EDGE_CURVE ( 'NONE', #11350, #70940, #25417, .T. ) ; +#5422 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 30.50000000000000000, -7.061964498581022400 ) ) ; +#5423 = CONICAL_SURFACE ( 'NONE', #13156, 10.50000000000009600, 0.7853981633974518300 ) ; +#5424 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#5425 = EDGE_CURVE ( 'NONE', #71807, #7846, #10952, .T. ) ; +#5426 = ORIENTED_EDGE ( 'NONE', *, *, #21286, .T. ) ; +#5427 = ORIENTED_EDGE ( 'NONE', *, *, #11668, .T. ) ; +#5428 = CIRCLE ( 'NONE', #61427, 10.00000000000009400 ) ; +#5429 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5431 = CARTESIAN_POINT ( 'NONE', ( 7.864938976472699600, 57.15000000000001300, -4.614325223488022800 ) ) ; +#5432 = EDGE_CURVE ( 'NONE', #25158, #75236, #77489, .T. ) ; +#5433 = EDGE_LOOP ( 'NONE', ( #74488, #5844, #51737 ) ) ; +#5434 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#5435 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5436 = CIRCLE ( 'NONE', #16659, 10.50000000000009600 ) ; +#5437 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5438 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 71.43945992495532900, -28.34042301926881200 ) ) ; +#5439 = FACE_OUTER_BOUND ( 'NONE', #53168, .T. ) ; +#5440 = EDGE_CURVE ( 'NONE', #2702, #76799, #48260, .T. ) ; +#5441 = ORIENTED_EDGE ( 'NONE', *, *, #40568, .F. ) ; +#5442 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429000, 26.42318720225498300, -28.70555803802994200 ) ) ; +#5443 = EDGE_CURVE ( 'NONE', #43972, #19734, #77254, .T. ) ; +#5444 = FACE_OUTER_BOUND ( 'NONE', #18575, .T. ) ; +#5446 = ORIENTED_EDGE ( 'NONE', *, *, #26768, .F. ) ; +#5445 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5448 = VERTEX_POINT ( 'NONE', #19287 ) ; +#5449 = AXIS2_PLACEMENT_3D ( 'NONE', #33719, #77232, #39975 ) ; +#5450 = EDGE_CURVE ( 'NONE', #25994, #11162, #50210, .T. ) ; +#5451 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183300, 49.63131911501876200, -28.51286550264510200 ) ) ; +#5452 = EDGE_CURVE ( 'NONE', #4704, #12178, #62816, .T. ) ; +#5453 = EDGE_CURVE ( 'NONE', #29861, #52657, #48304, .T. ) ; +#5454 = FACE_OUTER_BOUND ( 'NONE', #25504, .T. ) ; +#5455 = CONICAL_SURFACE ( 'NONE', #689, 10.00000000000009400, 0.7853981633974447300 ) ; +#5456 = ORIENTED_EDGE ( 'NONE', *, *, #37470, .F. ) ; +#5457 = EDGE_LOOP ( 'NONE', ( #2207, #27553, #32223, #73077 ) ) ; +#5458 = PLANE ( 'NONE', #9963 ) ; +#5459 = ORIENTED_EDGE ( 'NONE', *, *, #64224, .T. ) ; +#5460 = VERTEX_POINT ( 'NONE', #56816 ) ; +#5461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5462 = FACE_OUTER_BOUND ( 'NONE', #63477, .T. ) ; +#5463 = FACE_OUTER_BOUND ( 'NONE', #16624, .T. ) ; +#5464 = AXIS2_PLACEMENT_3D ( 'NONE', #75695, #32193, #63224 ) ; +#5465 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, -0.9999999999999833500, -6.205558038030003100 ) ) ; +#5466 = AXIS2_PLACEMENT_3D ( 'NONE', #24485, #67998, #30755 ) ; +#5467 = VERTEX_POINT ( 'NONE', #764 ) ; +#5468 = AXIS2_PLACEMENT_3D ( 'NONE', #49534, #37303, #74612 ) ; +#5469 = ORIENTED_EDGE ( 'NONE', *, *, #31038, .F. ) ; +#5470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5472 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 39.16666666666669300, -9.205558038030003900 ) ) ; +#5473 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27969, #21697, #71449, #34193 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.238204282289467400E-016, 0.001492013864176130500 ), + .UNSPECIFIED. ) ; +#5474 = CIRCLE ( 'NONE', #80532, 9.500000000000095900 ) ; +#5476 = ORIENTED_EDGE ( 'NONE', *, *, #77752, .T. ) ; +#5475 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#5477 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 80.16054007504463600, -28.34042301926881200 ) ) ; +#5478 = ORIENTED_EDGE ( 'NONE', *, *, #8851, .F. ) ; +#5479 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5480 = CIRCLE ( 'NONE', #29355, 10.50000000000009200 ) ; +#5481 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 4.333333333333341900, 5.722645192245503900 ) ) ; +#5482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5483 = AXIS2_PLACEMENT_3D ( 'NONE', #41778, #4533, #48010 ) ; +#5484 = EDGE_CURVE ( 'NONE', #32721, #33939, #79454, .T. ) ; +#5485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6742, #43971, #50236, #13025 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736117344500E-007, 0.0006649316450232003300 ), + .UNSPECIFIED. ) ; +#5486 = CARTESIAN_POINT ( 'NONE', ( -9.279102202939515800, 71.50050326225951400, -28.63287226700114000 ) ) ; +#5487 = ORIENTED_EDGE ( 'NONE', *, *, #3264, .F. ) ; +#5488 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 30.74660241562181500, -28.20555803802995200 ) ) ; +#5489 = ADVANCED_FACE ( 'NONE', ( #29847 ), #42422, .F. ) ; +#5490 = CARTESIAN_POINT ( 'NONE', ( -17.41542217839998600, 60.41624506589145200, -28.40985430318291100 ) ) ; +#5491 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#5492 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#5493 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819156900, 71.65075715145272300, -28.20555803803005900 ) ) ; +#5494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5495 = FACE_OUTER_BOUND ( 'NONE', #40888, .T. ) ; +#5496 = ORIENTED_EDGE ( 'NONE', *, *, #8483, .F. ) ; +#5497 = CARTESIAN_POINT ( 'NONE', ( -16.42604788048006600, 50.41500614408293000, -28.60532268353794900 ) ) ; +#5498 = EDGE_CURVE ( 'NONE', #51916, #65375, #33874, .T. ) ; +#5499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5500 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42041, #35810, #48284, #11065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141652960500 ), + .UNSPECIFIED. ) ; +#5501 = FACE_OUTER_BOUND ( 'NONE', #33869, .T. ) ; +#5502 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#5503 = AXIS2_PLACEMENT_3D ( 'NONE', #46038, #77348, #15063 ) ; +#5504 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408173600, 51.21413374642160900, -28.27331438134786600 ) ) ; +#5505 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515381300, 60.58127875436092300, -28.53757464917582400 ) ) ; +#5506 = VERTEX_POINT ( 'NONE', #75835 ) ; +#5507 = ORIENTED_EDGE ( 'NONE', *, *, #78491, .F. ) ; +#5508 = ADVANCED_FACE ( 'NONE', ( #11320 ), #32336, .T. ) ; +#5509 = FACE_OUTER_BOUND ( 'NONE', #30071, .T. ) ; +#5510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5511 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#5512 = VERTEX_POINT ( 'NONE', #38541 ) ; +#5513 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67247, #42743, #5504, #48976 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401340600, 0.004682530427069456900 ), + .UNSPECIFIED. ) ; +#5514 = CARTESIAN_POINT ( 'NONE', ( 3.221157914412298200, 20.43523632220587800, -28.30315276798564700 ) ) ; +#5515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5516 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 39.53085164125334900, -28.45573375118225500 ) ) ; +#5517 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263253600, 24.54999999999995500, -28.70555803802994200 ) ) ; +#5518 = FACE_OUTER_BOUND ( 'NONE', #78154, .T. ) ; +#5519 = AXIS2_PLACEMENT_3D ( 'NONE', #7166, #50669, #13472 ) ; +#5520 = FACE_OUTER_BOUND ( 'NONE', #37207, .T. ) ; +#5521 = ORIENTED_EDGE ( 'NONE', *, *, #45421, .F. ) ; +#5522 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782560200, 60.16054007504464400, -28.34042301926892900 ) ) ; +#5523 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 81.99560977511663400, -28.70555803802997700 ) ) ; +#5524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5525 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#5526 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 60.36203212531316400, -28.38801640354855500 ) ) ; +#5527 = VERTEX_POINT ( 'NONE', #57347 ) ; +#5528 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285715300, 43.67681279774500800, -28.70555803802997700 ) ) ; +#5529 = ORIENTED_EDGE ( 'NONE', *, *, #72422, .T. ) ; +#5530 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#5531 = AXIS2_PLACEMENT_3D ( 'NONE', #65969, #3930, #47416 ) ; +#5532 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973500, 75.15853008474745400, -28.52629299565633000 ) ) ; +#5533 = ADVANCED_FACE ( 'NONE', ( #27890 ), #73590, .F. ) ; +#5534 = CIRCLE ( 'NONE', #65332, 9.500000000000097700 ) ; +#5535 = EDGE_LOOP ( 'NONE', ( #3103, #78891, #32750, #31152, #7054, #13103 ) ) ; +#5536 = EDGE_CURVE ( 'NONE', #38201, #7608, #9333, .T. ) ; +#5537 = ORIENTED_EDGE ( 'NONE', *, *, #3146, .T. ) ; +#5538 = EDGE_LOOP ( 'NONE', ( #46364, #61368, #37253, #15629 ) ) ; +#5539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5540 = EDGE_LOOP ( 'NONE', ( #43268, #36113, #63781, #54003 ) ) ; +#5541 = FACE_OUTER_BOUND ( 'NONE', #55140, .T. ) ; +#5542 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 45.16666666666665000, -3.349151577478988200 ) ) ; +#5543 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#5544 = ORIENTED_EDGE ( 'NONE', *, *, #80447, .T. ) ; +#5545 = ORIENTED_EDGE ( 'NONE', *, *, #31082, .F. ) ; +#5546 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 70.16749699759739700, -28.20555803803047800 ) ) ; +#5547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5548 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30971, #5953, #80731, #43448 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.023017827855918000E-017, 0.001179148174662954300 ), + .UNSPECIFIED. ) ; +#5549 = CARTESIAN_POINT ( 'NONE', ( 16.52200773130723400, 30.97693523592567600, -28.54785533207244100 ) ) ; +#5550 = FACE_OUTER_BOUND ( 'NONE', #80676, .T. ) ; +#5551 = VERTEX_POINT ( 'NONE', #1572 ) ; +#5552 = EDGE_CURVE ( 'NONE', #46711, #28936, #25922, .T. ) ; +#5553 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548966000, 30.94069092601377900, -28.35186440610858200 ) ) ; +#5554 = ORIENTED_EDGE ( 'NONE', *, *, #19065, .F. ) ; +#5555 = FACE_OUTER_BOUND ( 'NONE', #44347, .T. ) ; +#5556 = FACE_OUTER_BOUND ( 'NONE', #50079, .T. ) ; +#5557 = AXIS2_PLACEMENT_3D ( 'NONE', #43176, #68220, #30973 ) ; +#5558 = EDGE_CURVE ( 'NONE', #14453, #28925, #75526, .T. ) ; +#5559 = EDGE_CURVE ( 'NONE', #2505, #35524, #15203, .T. ) ; +#5560 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806157900, 86.79999999999785100, -28.70555803802997700 ) ) ; +#5562 = ORIENTED_EDGE ( 'NONE', *, *, #27933, .T. ) ; +#5561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5563 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#5564 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 16.50000000000000700, 6.847000845227646500 ) ) ; +#5565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5566 = EDGE_CURVE ( 'NONE', #18570, #12878, #58983, .T. ) ; +#5567 = AXIS2_PLACEMENT_3D ( 'NONE', #73779, #36480, #80023 ) ; +#5568 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714800, 49.85339758437810100, -28.20555803802996700 ) ) ; +#5569 = CIRCLE ( 'NONE', #26613, 10.00000000000009400 ) ; +#5570 = VERTEX_POINT ( 'NONE', #51584 ) ; +#5571 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.47246552159110400, -28.38801640354855800 ) ) ; +#5572 = ORIENTED_EDGE ( 'NONE', *, *, #64313, .F. ) ; +#5573 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5574 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5575 = CARTESIAN_POINT ( 'NONE', ( -3.757024425534407200, 90.16517473503392900, -28.29551658696701500 ) ) ; +#5576 = ORIENTED_EDGE ( 'NONE', *, *, #79558, .F. ) ; +#5577 = CONICAL_SURFACE ( 'NONE', #16496, 10.50000000000009600, 0.7853981633974500600 ) ; +#5578 = AXIS2_PLACEMENT_3D ( 'NONE', #45102, #7878, #51360 ) ; +#5579 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#5580 = AXIS2_PLACEMENT_3D ( 'NONE', #16438, #47673, #35224 ) ; +#5581 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58835, #46287, #65130, #27867 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678005859500, 0.0007670610367941072400 ), + .UNSPECIFIED. ) ; +#5582 = ORIENTED_EDGE ( 'NONE', *, *, #64641, .T. ) ; +#5583 = EDGE_CURVE ( 'NONE', #5994, #15981, #19401, .T. ) ; +#5584 = ADVANCED_FACE ( 'NONE', ( #57047 ), #38493, .T. ) ; +#5585 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 101.5999999999999900, -1.205558038030005700 ) ) ; +#5587 = AXIS2_PLACEMENT_3D ( 'NONE', #79419, #42125, #4878 ) ; +#5586 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 48.00000000000002800, 6.794441961969996900 ) ) ; +#5588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5589 = FACE_OUTER_BOUND ( 'NONE', #57446, .T. ) ; +#5590 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 51.00000000000000700, -6.205558038030003100 ) ) ; +#5591 = ORIENTED_EDGE ( 'NONE', *, *, #65399, .F. ) ; +#5592 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274702300, 24.23212903577624300, -28.37244029424741900 ) ) ; +#5593 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 9.932503002402294000, -28.20555803802994200 ) ) ; +#5594 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50963, #44694, #63544, #26287 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633005785048800E-007, 0.0004089065559709824700 ), + .UNSPECIFIED. ) ; +#5595 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#5596 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849333000, 28.77966528189953300, -28.30868034705249100 ) ) ; +#5597 = EDGE_CURVE ( 'NONE', #76876, #28313, #4939, .T. ) ; +#5598 = EDGE_LOOP ( 'NONE', ( #34532, #22390, #61499, #41437 ) ) ; +#5599 = ADVANCED_FACE ( 'NONE', ( #7379 ), #5455, .T. ) ; +#5600 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385178500, 31.10677350908857300, -28.30799595738881900 ) ) ; +#5601 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474192200, 20.86172549728280500, -28.47230003642276200 ) ) ; +#5602 = AXIS2_PLACEMENT_3D ( 'NONE', #39091, #45326, #76370 ) ; +#5603 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748479500, 70.22161678501156200, -28.29547179040476800 ) ) ; +#5604 = AXIS2_PLACEMENT_3D ( 'NONE', #41161, #53667, #59684 ) ; +#5605 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#5606 = CARTESIAN_POINT ( 'NONE', ( 3.064555739225054000, 90.09037803491473500, -28.29483400905895600 ) ) ; +#5607 = FACE_OUTER_BOUND ( 'NONE', #73178, .T. ) ; +#5608 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#5609 = CIRCLE ( 'NONE', #18338, 10.00000000000009400 ) ; +#5610 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5611 = VERTEX_POINT ( 'NONE', #8623 ) ; +#5612 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#5613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5614 = ORIENTED_EDGE ( 'NONE', *, *, #80590, .T. ) ; +#5615 = ORIENTED_EDGE ( 'NONE', *, *, #63834, .F. ) ; +#5616 = ADVANCED_FACE ( 'NONE', ( #22003 ), #53128, .F. ) ; +#5617 = ORIENTED_EDGE ( 'NONE', *, *, #37472, .F. ) ; +#5618 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 62.18315603019283300, -28.70555803802999500 ) ) ; +#5619 = AXIS2_PLACEMENT_3D ( 'NONE', #13240, #56726, #19476 ) ; +#5620 = ORIENTED_EDGE ( 'NONE', *, *, #26094, .F. ) ; +#5621 = PLANE ( 'NONE', #39783 ) ; +#5622 = EDGE_LOOP ( 'NONE', ( #76382, #27092, #36124, #56708 ) ) ; +#5623 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#5624 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5625 = ADVANCED_FACE ( 'NONE', ( #23970 ), #20059, .F. ) ; +#5626 = FACE_OUTER_BOUND ( 'NONE', #43358, .T. ) ; +#5627 = AXIS2_PLACEMENT_3D ( 'NONE', #76410, #39126, #1869 ) ; +#5628 = ORIENTED_EDGE ( 'NONE', *, *, #38068, .T. ) ; +#5629 = ORIENTED_EDGE ( 'NONE', *, *, #9210, .T. ) ; +#5630 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 15.94142842854265000, -28.20555803803025800 ) ) ; +#5631 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 57.33333333333335000, 8.320721403598817300 ) ) ; +#5632 = EDGE_LOOP ( 'NONE', ( #20452, #45991, #2363 ) ) ; +#5633 = CIRCLE ( 'NONE', #1093, 10.50000000000009600 ) ; +#5634 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 22.50000000000000400, -4.865812075874393000 ) ) ; +#5635 = AXIS2_PLACEMENT_3D ( 'NONE', #57142, #63416, #50841 ) ; +#5636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5637 = ORIENTED_EDGE ( 'NONE', *, *, #13186, .T. ) ; +#5638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11851, #74144, #61902, #24623 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200783638800, 0.0008866563355341011400 ), + .UNSPECIFIED. ) ; +#5639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5640 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5641 = FACE_OUTER_BOUND ( 'NONE', #55388, .T. ) ; +#5642 = ORIENTED_EDGE ( 'NONE', *, *, #39978, .T. ) ; +#5643 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#5644 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5645 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 24.83333333333333200, 1.741883078712340300 ) ) ; +#5646 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890870400, 70.49763722318499500, -28.32100408376068400 ) ) ; +#5647 = ORIENTED_EDGE ( 'NONE', *, *, #19488, .F. ) ; +#5648 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 30.96868088498121500, -28.51286550264512000 ) ) ; +#5649 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#5650 = VERTEX_POINT ( 'NONE', #77189 ) ; +#5651 = CIRCLE ( 'NONE', #33644, 10.50000000000009600 ) ; +#5652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5654 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#5655 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#5656 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034405500, 38.92298334620738800, -28.20555803802996000 ) ) ; +#5657 = LINE ( 'NONE', #46999, #71868 ) ; +#5658 = VERTEX_POINT ( 'NONE', #39922 ) ; +#5659 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#5660 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655525700, 20.67701665379217200, -28.20555803802994500 ) ) ; +#5661 = EDGE_CURVE ( 'NONE', #10918, #13019, #71275, .T. ) ; +#5662 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34114, #77619, #40352, #3082 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447103417000E-007, 0.0002745498510224817800 ), + .UNSPECIFIED. ) ; +#5663 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542300, 39.99920551340399300, -28.70555803802995200 ) ) ; +#5664 = VERTEX_POINT ( 'NONE', #21450 ) ; +#5665 = DIRECTION ( 'NONE', ( 2.523234146875355000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5666 = ORIENTED_EDGE ( 'NONE', *, *, #48636, .F. ) ; +#5667 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69169, #885, #19690, #63208 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025224500, 0.0006251342085519584300 ), + .UNSPECIFIED. ) ; +#5668 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660889700, 90.13716795162605400, -28.48697406221735000 ) ) ; +#5669 = EDGE_CURVE ( 'NONE', #50912, #59782, #55075, .T. ) ; +#5670 = ADVANCED_FACE ( 'NONE', ( #71650 ), #64981, .T. ) ; +#5671 = CIRCLE ( 'NONE', #27509, 10.00000000000009200 ) ; +#5672 = CARTESIAN_POINT ( 'NONE', ( 10.63940720644215400, 28.66749699759768800, -28.25435056028469600 ) ) ; +#5673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5674 = EDGE_CURVE ( 'NONE', #29236, #3836, #56805, .T. ) ; +#5675 = FACE_OUTER_BOUND ( 'NONE', #21128, .T. ) ; +#5676 = VERTEX_POINT ( 'NONE', #71472 ) ; +#5677 = ORIENTED_EDGE ( 'NONE', *, *, #44584, .F. ) ; +#5678 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 28.33333333333335000, 2.794441961969998300 ) ) ; +#5679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5680 = ORIENTED_EDGE ( 'NONE', *, *, #67717, .F. ) ; +#5681 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5682 = ORIENTED_EDGE ( 'NONE', *, *, #11990, .T. ) ; +#5683 = ORIENTED_EDGE ( 'NONE', *, *, #54678, .F. ) ; +#5684 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15615, #21870, #40614, #3347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099545519779900E-007, 0.0008759529789572965700 ), + .UNSPECIFIED. ) ; +#5685 = ORIENTED_EDGE ( 'NONE', *, *, #66494, .F. ) ; +#5686 = ORIENTED_EDGE ( 'NONE', *, *, #18521, .T. ) ; +#5687 = EDGE_LOOP ( 'NONE', ( #32581, #68136, #4515, #7233 ) ) ; +#5688 = ORIENTED_EDGE ( 'NONE', *, *, #76734, .F. ) ; +#5689 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274455300, 90.30622828441261200, -28.24172590004350500 ) ) ; +#5690 = ADVANCED_FACE ( 'NONE', ( #40486 ), #34662, .F. ) ; +#5691 = ORIENTED_EDGE ( 'NONE', *, *, #48770, .T. ) ; +#5692 = AXIS2_PLACEMENT_3D ( 'NONE', #51992, #14778, #58290 ) ; +#5693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5694 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857188200, 18.07141756547853000, -28.70555803803009500 ) ) ; +#5695 = EDGE_CURVE ( 'NONE', #44027, #3605, #42325, .T. ) ; +#5696 = EDGE_CURVE ( 'NONE', #5316, #33554, #67740, .T. ) ; +#5697 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#5698 = EDGE_CURVE ( 'NONE', #17412, #22183, #36574, .T. ) ; +#5699 = AXIS2_PLACEMENT_3D ( 'NONE', #45551, #33354, #20859 ) ; +#5700 = ORIENTED_EDGE ( 'NONE', *, *, #61199, .F. ) ; +#5701 = FACE_OUTER_BOUND ( 'NONE', #55636, .T. ) ; +#5702 = EDGE_LOOP ( 'NONE', ( #2231, #74820, #25121, #29223 ) ) ; +#5703 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188355800, 41.39435118792234600, -28.41114655922301700 ) ) ; +#5704 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492349300, 73.03944396378859900, -28.70555803803001300 ) ) ; +#5705 = AXIS2_PLACEMENT_3D ( 'NONE', #78555, #41248, #3989 ) ; +#5706 = ORIENTED_EDGE ( 'NONE', *, *, #49140, .T. ) ; +#5707 = ADVANCED_FACE ( 'NONE', ( #69679 ), #46952, .T. ) ; +#5708 = ORIENTED_EDGE ( 'NONE', *, *, #17631, .T. ) ; +#5709 = ORIENTED_EDGE ( 'NONE', *, *, #32264, .T. ) ; +#5710 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5711 = AXIS2_PLACEMENT_3D ( 'NONE', #49360, #12150, #55642 ) ; +#5712 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5713 = CIRCLE ( 'NONE', #63084, 10.00000000000009400 ) ; +#5714 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528041070100, 57.94142842854297000, -28.37229765499285300 ) ) ; +#5715 = EDGE_CURVE ( 'NONE', #22543, #79387, #51131, .T. ) ; +#5716 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537338500, 61.25732391202388500, -28.20555803803014400 ) ) ; +#5717 = AXIS2_PLACEMENT_3D ( 'NONE', #4285, #16815, #72845 ) ; +#5718 = ORIENTED_EDGE ( 'NONE', *, *, #50323, .F. ) ; +#5719 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100670600, 49.12363993080086300, -28.38670679782169200 ) ) ; +#5720 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846538200, 40.60079448659411100, -28.70555803802996700 ) ) ; +#5721 = ORIENTED_EDGE ( 'NONE', *, *, #21494, .T. ) ; +#5722 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74332, #61822, #43276, #6043 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001492013864175135500 ), + .UNSPECIFIED. ) ; +#5723 = ADVANCED_FACE ( 'NONE', ( #3476 ), #16155, .T. ) ; +#5724 = LINE ( 'NONE', #5585, #38777 ) ; +#5726 = EDGE_LOOP ( 'NONE', ( #28051, #53962, #56629 ) ) ; +#5725 = CARTESIAN_POINT ( 'NONE', ( -17.04026895850642400, 41.37561462481247100, -28.30309985153377300 ) ) ; +#5727 = AXIS2_PLACEMENT_3D ( 'NONE', #19870, #63406, #26138 ) ; +#5728 = ORIENTED_EDGE ( 'NONE', *, *, #73581, .T. ) ; +#5729 = ORIENTED_EDGE ( 'NONE', *, *, #27882, .F. ) ; +#5730 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, -3.166666666666678500, 3.794441961969996900 ) ) ; +#5731 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5732 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 9.932503002402294000, -28.20555803802994200 ) ) ; +#5733 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 37.00000000000000700, 6.794441961969995200 ) ) ; +#5734 = AXIS2_PLACEMENT_3D ( 'NONE', #57677, #20427, #63963 ) ; +#5735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5736 = CONICAL_SURFACE ( 'NONE', #42616, 10.00000000000009400, 0.7853981633974447300 ) ; +#5737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5738 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5739 = CIRCLE ( 'NONE', #78662, 10.00000000000009200 ) ; +#5740 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 2.166666666666683400, -9.205558038030003900 ) ) ; +#5741 = VERTEX_POINT ( 'NONE', #59783 ) ; +#5742 = EDGE_LOOP ( 'NONE', ( #42358, #12033, #61625, #74989 ) ) ; +#5743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5745 = AXIS2_PLACEMENT_3D ( 'NONE', #67959, #55434, #80481 ) ; +#5746 = ORIENTED_EDGE ( 'NONE', *, *, #45167, .T. ) ; +#5747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5748 = CARTESIAN_POINT ( 'NONE', ( 17.22125914545589300, 18.16476764525062000, -28.30311733712086700 ) ) ; +#5749 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338504200, 31.10677350908861200, -28.30799595738890800 ) ) ; +#5750 = EDGE_CURVE ( 'NONE', #48195, #67117, #32684, .T. ) ; +#5751 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 80.34267608797603100, -28.20555803802997700 ) ) ; +#5752 = FACE_OUTER_BOUND ( 'NONE', #27426, .T. ) ; +#5753 = VERTEX_POINT ( 'NONE', #16260 ) ; +#5754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5755 = FACE_OUTER_BOUND ( 'NONE', #15969, .T. ) ; +#5756 = ORIENTED_EDGE ( 'NONE', *, *, #53327, .T. ) ; +#5757 = ORIENTED_EDGE ( 'NONE', *, *, #17856, .T. ) ; +#5758 = AXIS2_PLACEMENT_3D ( 'NONE', #24803, #68312, #31064 ) ; +#5759 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#5760 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5761 = ORIENTED_EDGE ( 'NONE', *, *, #6046, .F. ) ; +#5762 = CIRCLE ( 'NONE', #34549, 10.50000000000009800 ) ; +#5763 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5764 = EDGE_LOOP ( 'NONE', ( #62651, #22274, #26850, #61842 ) ) ; +#5765 = VERTEX_POINT ( 'NONE', #9993 ) ; +#5766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5767 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5768 = ORIENTED_EDGE ( 'NONE', *, *, #28108, .F. ) ; +#5769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19462, #56713, #945, #44425 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082086745500E-007, 0.0007679735311067880300 ), + .UNSPECIFIED. ) ; +#5770 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 36.60073525436785500, -28.70555803802995200 ) ) ; +#5771 = ORIENTED_EDGE ( 'NONE', *, *, #41525, .F. ) ; +#5772 = ORIENTED_EDGE ( 'NONE', *, *, #72668, .T. ) ; +#5773 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656722600, 49.85339758437807900, -28.20555803802996700 ) ) ; +#5774 = EDGE_LOOP ( 'NONE', ( #33095, #67983, #74658, #71158 ) ) ; +#5775 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#5776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5777 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124984900, 55.13282980700518000, -28.53914313452737900 ) ) ; +#5778 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#5779 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492456300, 21.02620220503760300, -28.70555803802994200 ) ) ; +#5780 = ORIENTED_EDGE ( 'NONE', *, *, #66132, .T. ) ; +#5781 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180756500, 79.94924284854684500, -28.20555803802997700 ) ) ; +#5782 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5783 = CARTESIAN_POINT ( 'NONE', ( -17.30192380577545200, 79.84168709918191100, -28.43753768099855600 ) ) ; +#5784 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5785 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 32.47376207875059600, -28.70555803802996700 ) ) ; +#5786 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5787 = FACE_OUTER_BOUND ( 'NONE', #41472, .T. ) ; +#5788 = ORIENTED_EDGE ( 'NONE', *, *, #13367, .F. ) ; +#5789 = EDGE_CURVE ( 'NONE', #13063, #70022, #27925, .T. ) ; +#5790 = CARTESIAN_POINT ( 'NONE', ( -12.14815378900369900, 55.79999999999999000, -28.37148172714570600 ) ) ; +#5791 = ORIENTED_EDGE ( 'NONE', *, *, #16185, .T. ) ; +#5792 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 70.16054007504466500, -28.34042301926881200 ) ) ; +#5793 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#5794 = ORIENTED_EDGE ( 'NONE', *, *, #53162, .T. ) ; +#5795 = EDGE_LOOP ( 'NONE', ( #15758, #67508, #75820 ) ) ; +#5796 = EDGE_CURVE ( 'NONE', #13816, #48902, #49201, .T. ) ; +#5797 = CONICAL_SURFACE ( 'NONE', #26038, 10.50000000000009900, 0.7853981633974518300 ) ; +#5798 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686889500, 60.01994747561644800, -28.24986299608865200 ) ) ; +#5799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5800 = EDGE_CURVE ( 'NONE', #73096, #59395, #13445, .T. ) ; +#5801 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5802 = VERTEX_POINT ( 'NONE', #47761 ) ; +#5803 = EDGE_CURVE ( 'NONE', #53233, #11958, #79741, .T. ) ; +#5804 = AXIS2_PLACEMENT_3D ( 'NONE', #80248, #42965, #36720 ) ; +#5805 = CIRCLE ( 'NONE', #9802, 10.00000000000009200 ) ; +#5806 = ORIENTED_EDGE ( 'NONE', *, *, #46743, .F. ) ; +#5807 = ADVANCED_FACE ( 'NONE', ( #44342 ), #30758, .F. ) ; +#5808 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.66749699759768800, -28.20555803802996700 ) ) ; +#5809 = ORIENTED_EDGE ( 'NONE', *, *, #77523, .T. ) ; +#5810 = ORIENTED_EDGE ( 'NONE', *, *, #61698, .F. ) ; +#5811 = ADVANCED_FACE ( 'NONE', ( #63849 ), #78451, .F. ) ; +#5812 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 43.00000000000000700, -1.205558038030005300 ) ) ; +#5813 = AXIS2_PLACEMENT_3D ( 'NONE', #26437, #69908, #32655 ) ; +#5814 = EDGE_CURVE ( 'NONE', #6456, #780, #65333, .T. ) ; +#5815 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#5816 = EDGE_CURVE ( 'NONE', #63300, #32073, #1535, .T. ) ; +#5817 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 90.16616330387869000, -28.27375072930956200 ) ) ; +#5818 = EDGE_CURVE ( 'NONE', #33091, #28682, #14200, .T. ) ; +#5819 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23314, #35830, #79355, #42064 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695380726473400E-007, 0.0007987676590763198100 ), + .UNSPECIFIED. ) ; +#5820 = ADVANCED_FACE ( 'NONE', ( #80378 ), #12258, .F. ) ; +#5821 = AXIS2_PLACEMENT_3D ( 'NONE', #4099, #47592, #10375 ) ; +#5822 = FACE_OUTER_BOUND ( 'NONE', #46207, .T. ) ; +#5823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59265, #15747, #71792, #34534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647886501400E-007, 0.0007596411030280888000 ), + .UNSPECIFIED. ) ; +#5824 = CIRCLE ( 'NONE', #72347, 10.00000000000009200 ) ; +#5825 = ORIENTED_EDGE ( 'NONE', *, *, #34773, .T. ) ; +#5826 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471817200, 18.13131911501876200, -28.51286550264506700 ) ) ; +#5827 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26765, #58017, #33268, #76778 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351388594800E-007, 0.0004318366892330758400 ), + .UNSPECIFIED. ) ; +#5828 = EDGE_CURVE ( 'NONE', #34422, #59491, #50784, .T. ) ; +#5829 = AXIS2_PLACEMENT_3D ( 'NONE', #35242, #16452, #78751 ) ; +#5830 = AXIS2_PLACEMENT_3D ( 'NONE', #78289, #15993, #47221 ) ; +#5831 = ORIENTED_EDGE ( 'NONE', *, *, #66103, .F. ) ; +#5832 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.79999999999999700, -28.20555803802997700 ) ) ; +#5833 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5834 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#5835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5836 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 14.33333333333334300, -6.705558038030005700 ) ) ; +#5837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49520, #12320, #55803, #18558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409702700 ), + .UNSPECIFIED. ) ; +#5838 = CIRCLE ( 'NONE', #40942, 10.50000000000009600 ) ; +#5839 = EDGE_LOOP ( 'NONE', ( #60785, #29455, #67203 ) ) ; +#5840 = CONICAL_SURFACE ( 'NONE', #64602, 10.00000000000009600, 0.7853981633974447300 ) ; +#5841 = EDGE_LOOP ( 'NONE', ( #31977, #13433, #50510, #76506 ) ) ; +#5842 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658246900, 18.15151454780960800, -28.67627428870437700 ) ) ; +#5843 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5844 = ORIENTED_EDGE ( 'NONE', *, *, #21320, .T. ) ; +#5845 = VECTOR ( 'NONE', #55477, 1000.000000000000000 ) ; +#5846 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.60252595950260000, -28.26641963845862500 ) ) ; +#5847 = VERTEX_POINT ( 'NONE', #54833 ) ; +#5848 = ORIENTED_EDGE ( 'NONE', *, *, #53690, .F. ) ; +#5849 = ORIENTED_EDGE ( 'NONE', *, *, #48294, .F. ) ; +#5850 = ORIENTED_EDGE ( 'NONE', *, *, #68707, .T. ) ; +#5851 = ORIENTED_EDGE ( 'NONE', *, *, #62774, .T. ) ; +#5852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5853 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965400, 49.65930907398620800, -28.35186440610858900 ) ) ; +#5854 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5855 = ORIENTED_EDGE ( 'NONE', *, *, #18108, .F. ) ; +#5856 = AXIS2_PLACEMENT_3D ( 'NONE', #40346, #21614, #9328 ) ; +#5857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5858 = CARTESIAN_POINT ( 'NONE', ( -10.24306493325783100, 81.43482203710631500, -28.29548531138973300 ) ) ; +#5859 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448990000, 45.83333333333332900, -9.205558038030005700 ) ) ; +#5860 = AXIS2_PLACEMENT_3D ( 'NONE', #39347, #2086, #45572 ) ; +#5861 = ORIENTED_EDGE ( 'NONE', *, *, #25846, .F. ) ; +#5862 = CARTESIAN_POINT ( 'NONE', ( 1.272691540716740500, 55.79999999999999000, -28.53979898350159800 ) ) ; +#5863 = FACE_OUTER_BOUND ( 'NONE', #80218, .T. ) ; +#5864 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459550000, 52.51973550835661800, -28.70555803802997700 ) ) ; +#5865 = ORIENTED_EDGE ( 'NONE', *, *, #76079, .F. ) ; +#5866 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 48.83333333333334300, 3.794441961969996900 ) ) ; +#5867 = ORIENTED_EDGE ( 'NONE', *, *, #9734, .T. ) ; +#5868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5869 = VERTEX_POINT ( 'NONE', #29878 ) ; +#5870 = EDGE_CURVE ( 'NONE', #74017, #25126, #28840, .T. ) ; +#5871 = ORIENTED_EDGE ( 'NONE', *, *, #1699, .F. ) ; +#5872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28316, #22017, #9479, #71796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646314600, 0.0009605145132142250100 ), + .UNSPECIFIED. ) ; +#5874 = CARTESIAN_POINT ( 'NONE', ( -3.371418216713582400, 70.16749699759769500, -28.25056166218022100 ) ) ; +#5875 = CIRCLE ( 'NONE', #348, 9.500000000000095900 ) ; +#5876 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828120900, 81.13768531620316100, -28.37082013777832800 ) ) ; +#5877 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528153100, 9.968680884981223400, -28.51286550264508800 ) ) ; +#5878 = AXIS2_PLACEMENT_3D ( 'NONE', #67243, #54987, #5228 ) ; +#5879 = VERTEX_POINT ( 'NONE', #60585 ) ; +#5880 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 87.94142842854296300, -28.20555803802997700 ) ) ; +#5881 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428100, 43.67681279774500800, -28.70555803802997700 ) ) ; +#5882 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61452, #11673, #17907, #24173 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438988098500E-007, 0.0007763347809200147900 ), + .UNSPECIFIED. ) ; +#5883 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#5884 = ORIENTED_EDGE ( 'NONE', *, *, #3437, .F. ) ; +#5885 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752718200, 62.08770193146118300, -28.47147304844863300 ) ) ; +#5886 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042469200, 48.50972971738995200, -28.70555803802996700 ) ) ; +#5887 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846298500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#5888 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5889 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#5890 = AXIS2_PLACEMENT_3D ( 'NONE', #55146, #17902, #61447 ) ; +#5891 = FACE_OUTER_BOUND ( 'NONE', #56389, .T. ) ; +#5892 = ORIENTED_EDGE ( 'NONE', *, *, #10452, .T. ) ; +#5893 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#5894 = EDGE_LOOP ( 'NONE', ( #74006, #24593, #51244 ) ) ; +#5895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5897 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269456000, 81.58737389638835700, -28.29936525552456000 ) ) ; +#5898 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5899 = CARTESIAN_POINT ( 'NONE', ( 4.002024496668894000, 49.78907889423216200, -28.25433304472396800 ) ) ; +#5900 = ADVANCED_FACE ( 'NONE', ( #61899 ), #43355, .F. ) ; +#5901 = EDGE_CURVE ( 'NONE', #7748, #68074, #36354, .T. ) ; +#5902 = CONICAL_SURFACE ( 'NONE', #8296, 10.00000000000009400, 0.7853981633974447300 ) ; +#5903 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#5904 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 55.16666666666667900, -12.20555803803000000 ) ) ; +#5905 = EDGE_CURVE ( 'NONE', #5117, #43256, #21902, .T. ) ; +#5906 = ORIENTED_EDGE ( 'NONE', *, *, #45545, .T. ) ; +#5907 = ORIENTED_EDGE ( 'NONE', *, *, #32569, .T. ) ; +#5908 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#5909 = ORIENTED_EDGE ( 'NONE', *, *, #8039, .F. ) ; +#5910 = ADVANCED_FACE ( 'NONE', ( #59954 ), #10298, .T. ) ; +#5911 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 20.33333333333334300, 3.124568980892187500 ) ) ; +#5912 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5913 = EDGE_CURVE ( 'NONE', #40242, #27405, #7409, .T. ) ; +#5914 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999974200, 16.16545993132805500, -28.70555803803001600 ) ) ; +#5915 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#5916 = CIRCLE ( 'NONE', #34653, 9.500000000000097700 ) ; +#5917 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .F. ) ; +#5918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5919 = ORIENTED_EDGE ( 'NONE', *, *, #15810, .F. ) ; +#5920 = EDGE_CURVE ( 'NONE', #26859, #48835, #26846, .T. ) ; +#5921 = EDGE_CURVE ( 'NONE', #63749, #9809, #45281, .T. ) ; +#5922 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5923 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72900, #79161, #54376, #17137 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884034500E-019, 0.001246264537621180600 ), + .UNSPECIFIED. ) ; +#5924 = CONICAL_SURFACE ( 'NONE', #35504, 10.00000000000009600, 0.7853981633974482800 ) ; +#5925 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 22.66666666666667100, -6.705558038030000400 ) ) ; +#5926 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.94142842854297000, -28.20555803802995200 ) ) ; +#5927 = ORIENTED_EDGE ( 'NONE', *, *, #64345, .F. ) ; +#5928 = EDGE_LOOP ( 'NONE', ( #8998, #14788, #11327 ) ) ; +#5929 = ORIENTED_EDGE ( 'NONE', *, *, #47467, .F. ) ; +#5930 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 39.34510448120794000, -28.37193179497694500 ) ) ; +#5931 = ORIENTED_EDGE ( 'NONE', *, *, #70747, .T. ) ; +#5932 = VERTEX_POINT ( 'NONE', #56197 ) ; +#5933 = EDGE_CURVE ( 'NONE', #14035, #55473, #73770, .T. ) ; +#5934 = EDGE_CURVE ( 'NONE', #38144, #21273, #59292, .T. ) ; +#5935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5936 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051545500, 80.58127875436048300, -28.53757464917574200 ) ) ; +#5937 = EDGE_CURVE ( 'NONE', #25223, #2565, #44777, .T. ) ; +#5938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5939 = ADVANCED_FACE ( 'NONE', ( #18093 ), #24892, .T. ) ; +#5940 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753900, 19.89456479767169800, -28.70555803802994200 ) ) ; +#5941 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31178, #18650, #12683, #56155 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659438400, 0.0005685240369918612300 ), + .UNSPECIFIED. ) ; +#5942 = CONICAL_SURFACE ( 'NONE', #23934, 10.50000000000009600, 0.7853981633974500600 ) ; +#5943 = AXIS2_PLACEMENT_3D ( 'NONE', #72206, #34939, #78458 ) ; +#5945 = ORIENTED_EDGE ( 'NONE', *, *, #13328, .F. ) ; +#5944 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655694400, 38.92298334620754500, -28.20555803802996000 ) ) ; +#5946 = ORIENTED_EDGE ( 'NONE', *, *, #46031, .T. ) ; +#5947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5948 = ORIENTED_EDGE ( 'NONE', *, *, #48594, .T. ) ; +#5949 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326100, 80.79999999999991200, -28.55171188418386000 ) ) ; +#5950 = ORIENTED_EDGE ( 'NONE', *, *, #34737, .T. ) ; +#5951 = EDGE_LOOP ( 'NONE', ( #6517, #43977, #11561, #73778, #47277 ) ) ; +#5952 = CARTESIAN_POINT ( 'NONE', ( 3.985751803131141600, 90.01994747561670400, -28.24986299608891100 ) ) ; +#5953 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825700, 81.93585231025956300, -28.38420446581291400 ) ) ; +#5954 = VERTEX_POINT ( 'NONE', #75771 ) ; +#5955 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#5956 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#5957 = CIRCLE ( 'NONE', #30078, 10.50000000000009200 ) ; +#5958 = AXIS2_PLACEMENT_3D ( 'NONE', #75082, #25322, #31572 ) ; +#5959 = VERTEX_POINT ( 'NONE', #38474 ) ; +#5960 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 47.44142842854296300, -28.20555803802996700 ) ) ; +#5961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66685, #73216, #67224, #29990 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099548407491500E-007, 0.0008759529789574139900 ), + .UNSPECIFIED. ) ; +#5962 = AXIS2_PLACEMENT_3D ( 'NONE', #15728, #77728, #9448 ) ; +#5963 = VERTEX_POINT ( 'NONE', #19765 ) ; +#5964 = CARTESIAN_POINT ( 'NONE', ( 1.705837858217823300, 24.54999999999999700, -28.37136602294608100 ) ) ; +#5965 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 26.16666666666667500, -3.349151577478988200 ) ) ; +#5966 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999895600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5967 = CIRCLE ( 'NONE', #20650, 9.500000000000099500 ) ; +#5968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5969 = ORIENTED_EDGE ( 'NONE', *, *, #14270, .T. ) ; +#5970 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#5971 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148534200, 44.59761904761907700, -28.70555803802999900 ) ) ; +#5972 = AXIS2_PLACEMENT_3D ( 'NONE', #75111, #6564, #25349 ) ; +#5973 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451035100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#5974 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79009, #72741, #29268, #41694 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698236188800E-007, 0.0008724363063900002600 ), + .UNSPECIFIED. ) ; +#5975 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#5976 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 77.92318720225497900, -28.70555803802997700 ) ) ; +#5977 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5978 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813400, 59.60439022488336000, -28.70555803802997700 ) ) ; +#5979 = EDGE_CURVE ( 'NONE', #74584, #65167, #30412, .T. ) ; +#5980 = EDGE_LOOP ( 'NONE', ( #55687, #10769, #49758 ) ) ; +#5981 = ORIENTED_EDGE ( 'NONE', *, *, #7713, .T. ) ; +#5982 = AXIS2_PLACEMENT_3D ( 'NONE', #74773, #24998, #18742 ) ; +#5983 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#5984 = ORIENTED_EDGE ( 'NONE', *, *, #35861, .T. ) ; +#5985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5986 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#5987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5988 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#5989 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#5990 = ADVANCED_FACE ( 'NONE', ( #76465 ), #72594, .T. ) ; +#5991 = FACE_OUTER_BOUND ( 'NONE', #62403, .T. ) ; +#5992 = ORIENTED_EDGE ( 'NONE', *, *, #10411, .F. ) ; +#5993 = AXIS2_PLACEMENT_3D ( 'NONE', #76242, #38954, #1701 ) ; +#5994 = VERTEX_POINT ( 'NONE', #38745 ) ; +#5995 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 87.92318720225496500, -28.70555803802997700 ) ) ; +#5996 = ORIENTED_EDGE ( 'NONE', *, *, #65492, .F. ) ; +#5997 = CONICAL_SURFACE ( 'NONE', #15110, 10.00000000000009200, 0.7853981633974415100 ) ; +#5998 = ORIENTED_EDGE ( 'NONE', *, *, #20457, .F. ) ; +#5999 = EDGE_LOOP ( 'NONE', ( #17642, #23422, #71919, #30787 ) ) ; +#6000 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002100, 29.03085164125335300, -28.45573375118225800 ) ) ; +#6001 = ORIENTED_EDGE ( 'NONE', *, *, #15351, .T. ) ; +#6002 = ADVANCED_FACE ( 'NONE', ( #74532 ), #39466, .T. ) ; +#6003 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 69.83333333333334300, -6.205558038030004800 ) ) ; +#6004 = AXIS2_PLACEMENT_3D ( 'NONE', #25592, #795, #62858 ) ; +#6005 = FACE_OUTER_BOUND ( 'NONE', #65341, .T. ) ; +#6006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5656, #42909, #18173, #61716 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574875649800E-007, 0.0007596410370205394400 ), + .UNSPECIFIED. ) ; +#6008 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 34.83333333333332100, -9.205558038030003900 ) ) ; +#6009 = VERTEX_POINT ( 'NONE', #51243 ) ; +#6010 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#6011 = FACE_OUTER_BOUND ( 'NONE', #43585, .T. ) ; +#6012 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 44.37738371066728100, -28.70555803802997700 ) ) ; +#6013 = EDGE_CURVE ( 'NONE', #32323, #15753, #65799, .T. ) ; +#6014 = ORIENTED_EDGE ( 'NONE', *, *, #29240, .T. ) ; +#6015 = ADVANCED_FACE ( 'NONE', ( #8309 ), #14041, .T. ) ; +#6016 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 101.5999999999999900, 4.415659757031871100E-015 ) ) ; +#6017 = VERTEX_POINT ( 'NONE', #63826 ) ; +#6018 = ADVANCED_FACE ( 'NONE', ( #22940 ), #54067, .T. ) ; +#6019 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 1.387778780781445700E-014, 6.794441961969995200 ) ) ; +#6020 = ORIENTED_EDGE ( 'NONE', *, *, #70491, .T. ) ; +#6021 = ORIENTED_EDGE ( 'NONE', *, *, #25607, .F. ) ; +#6022 = ORIENTED_EDGE ( 'NONE', *, *, #39857, .F. ) ; +#6023 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#6024 = FACE_OUTER_BOUND ( 'NONE', #34475, .T. ) ; +#6025 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701300, 38.19543746431600800, -28.61277292027075700 ) ) ; +#6026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6027 = ADVANCED_FACE ( 'NONE', ( #47251 ), #21007, .T. ) ; +#6028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69965, #20222, #7953, #51441 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527041627800E-007, 0.0007303749718167598700 ), + .UNSPECIFIED. ) ; +#6030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6031 = EDGE_CURVE ( 'NONE', #18334, #47643, #15906, .T. ) ; +#6032 = EDGE_CURVE ( 'NONE', #56186, #36688, #37498, .T. ) ; +#6033 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.22294471194861400, -28.20555803802997700 ) ) ; +#6034 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6035 = CONICAL_SURFACE ( 'NONE', #251, 10.00000000000009400, 0.7853981633974447300 ) ; +#6036 = VERTEX_POINT ( 'NONE', #8281 ) ; +#6037 = EDGE_LOOP ( 'NONE', ( #22867, #70698, #41448, #67423 ) ) ; +#6038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6039 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#6040 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6042 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124978200, 76.46717019299460100, -28.53914313452752800 ) ) ; +#6043 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998200, 59.41684396980715400, -28.70555803802999500 ) ) ; +#6044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6045 = AXIS2_PLACEMENT_3D ( 'NONE', #35201, #78713, #41414 ) ; +#6046 = EDGE_CURVE ( 'NONE', #9176, #29405, #1427, .T. ) ; +#6047 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#6048 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1905, #14448, #70453, #33203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634345670600E-007, 0.0008082706238601565000 ), + .UNSPECIFIED. ) ; +#6049 = EDGE_CURVE ( 'NONE', #48835, #59892, #70607, .T. ) ; +#6050 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6051 = EDGE_CURVE ( 'NONE', #72537, #9345, #57976, .T. ) ; +#6052 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032400, 30.94069092601377900, -28.35186440610858200 ) ) ; +#6053 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534584500, 39.99920551340398600, -28.70555803802995200 ) ) ; +#6054 = EDGE_CURVE ( 'NONE', #45954, #14016, #56013, .T. ) ; +#6055 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#6056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6057 = AXIS2_PLACEMENT_3D ( 'NONE', #45857, #8603, #52112 ) ; +#6058 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 5.000000000000000000, -1.205558038030003500 ) ) ; +#6059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6060 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64045, #20505, #33006, #76510 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286967547500E-007, 0.0007303759720927549400 ), + .UNSPECIFIED. ) ; +#6061 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686886600, 81.58005252438356100, -28.24986299608881900 ) ) ; +#6062 = ORIENTED_EDGE ( 'NONE', *, *, #28542, .F. ) ; +#6063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6064 = ORIENTED_EDGE ( 'NONE', *, *, #6276, .T. ) ; +#6065 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6066 = AXIS2_PLACEMENT_3D ( 'NONE', #47733, #10506, #54005 ) ; +#6067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6068 = AXIS2_PLACEMENT_3D ( 'NONE', #64378, #70578, #20825 ) ; +#6069 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3745, #28568, #9759, #47244 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278526700, 0.0005468822770175680100 ), + .UNSPECIFIED. ) ; +#6070 = CIRCLE ( 'NONE', #27278, 9.500000000000099500 ) ; +#6071 = ORIENTED_EDGE ( 'NONE', *, *, #54529, .T. ) ; +#6072 = CONICAL_SURFACE ( 'NONE', #45093, 10.50000000000009600, 0.7853981633974500600 ) ; +#6073 = EDGE_LOOP ( 'NONE', ( #78472, #7060, #80359, #9018, #61464 ) ) ; +#6074 = CIRCLE ( 'NONE', #44413, 10.00000000000009200 ) ; +#6075 = VERTEX_POINT ( 'NONE', #46081 ) ; +#6076 = VERTEX_POINT ( 'NONE', #2563 ) ; +#6077 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 40.83333333333335000, 0.9380355014189731800 ) ) ; +#6078 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 70.34267608797567600, -28.20555803802997700 ) ) ; +#6079 = AXIS2_PLACEMENT_3D ( 'NONE', #30715, #61734, #80484 ) ; +#6080 = EDGE_CURVE ( 'NONE', #60031, #21296, #67773, .T. ) ; +#6081 = CIRCLE ( 'NONE', #74945, 9.500000000000101300 ) ; +#6082 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#6083 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561500, 55.79999999999999000, -28.70525300642875200 ) ) ; +#6084 = ADVANCED_FACE ( 'NONE', ( #68667 ), #2464, .F. ) ; +#6085 = EDGE_LOOP ( 'NONE', ( #1381, #883, #63147 ) ) ; +#6086 = CONICAL_SURFACE ( 'NONE', #45674, 10.50000000000009600, 0.7853981633974500600 ) ; +#6087 = ORIENTED_EDGE ( 'NONE', *, *, #70913, .F. ) ; +#6088 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148838400, 36.00238095238051300, -28.70555803802995200 ) ) ; +#6089 = EDGE_CURVE ( 'NONE', #5301, #7748, #19019, .T. ) ; +#6090 = ORIENTED_EDGE ( 'NONE', *, *, #61593, .F. ) ; +#6091 = AXIS2_PLACEMENT_3D ( 'NONE', #54365, #10877, #29657 ) ; +#6092 = EDGE_LOOP ( 'NONE', ( #36861, #34884, #38891 ) ) ; +#6093 = ORIENTED_EDGE ( 'NONE', *, *, #55352, .T. ) ; +#6094 = CIRCLE ( 'NONE', #19461, 9.500000000000099500 ) ; +#6095 = ORIENTED_EDGE ( 'NONE', *, *, #24385, .F. ) ; +#6096 = FACE_OUTER_BOUND ( 'NONE', #73435, .T. ) ; +#6097 = ADVANCED_FACE ( 'NONE', ( #52080 ), #33624, .T. ) ; +#6098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6099 = CARTESIAN_POINT ( 'NONE', ( -10.98575180313110200, 90.01994747561643400, -28.24986299608865200 ) ) ; +#6100 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26937, #64214, #45635, #8383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192576588400 ), + .UNSPECIFIED. ) ; +#6101 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6102 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999955800, 71.61077422949635700, -28.37255355648661500 ) ) ; +#6103 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 12.16666666666667300, 1.741883078712356500 ) ) ; +#6104 = EDGE_LOOP ( 'NONE', ( #5909, #66663, #66760, #77906, #8461, #77935 ) ) ; +#6105 = AXIS2_PLACEMENT_3D ( 'NONE', #11340, #54819, #17596 ) ; +#6106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6107 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803803001300 ) ) ; +#6108 = CONICAL_SURFACE ( 'NONE', #4913, 10.00000000000009200, 0.7853981633974447300 ) ; +#6109 = ORIENTED_EDGE ( 'NONE', *, *, #68838, .F. ) ; +#6110 = ADVANCED_FACE ( 'NONE', ( #6385 ), #77650, .T. ) ; +#6111 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6112 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#6113 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285711700, 33.17681279774499400, -28.70555803802996700 ) ) ; +#6114 = CARTESIAN_POINT ( 'NONE', ( -12.10011726479567400, 14.05000000000000600, -28.53808257741930600 ) ) ; +#6115 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807122900, 66.79999999999994000, -28.70555803802997700 ) ) ; +#6116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6117 = ADVANCED_FACE ( 'NONE', ( #41430 ), #17094, .T. ) ; +#6118 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6119 = EDGE_CURVE ( 'NONE', #71334, #2153, #35595, .T. ) ; +#6120 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 46.66666666666667900, -5.535685056952199400 ) ) ; +#6121 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 75.47903320442299000, -28.36604143581847400 ) ) ; +#6122 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344307300, 31.17701665379242100, -28.20555803802996000 ) ) ; +#6123 = EDGE_LOOP ( 'NONE', ( #68058, #12806, #50528, #41117 ) ) ; +#6124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6125 = ORIENTED_EDGE ( 'NONE', *, *, #40376, .F. ) ; +#6126 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003200, 80.24722181384549900, -28.70555803803016200 ) ) ; +#6127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6128 = ADVANCED_FACE ( 'NONE', ( #4433 ), #59146, .T. ) ; +#6129 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25598, #56574, #31848, #75348 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710568600, 0.0008082646680352269100 ), + .UNSPECIFIED. ) ; +#6130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6131 = CARTESIAN_POINT ( 'NONE', ( -10.37150777124396100, 51.43250300240229900, -28.25053031809458700 ) ) ; +#6132 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034432500, 31.17701665379225800, -28.20555803802996000 ) ) ; +#6133 = ORIENTED_EDGE ( 'NONE', *, *, #58435, .T. ) ; +#6134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6136 = FACE_OUTER_BOUND ( 'NONE', #15854, .T. ) ; +#6137 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949247200, 49.07379779496241000, -28.70555803802996700 ) ) ; +#6138 = ORIENTED_EDGE ( 'NONE', *, *, #62631, .F. ) ; +#6139 = CARTESIAN_POINT ( 'NONE', ( 1.522869512014927200, 50.55000000000000400, -28.56111762074697000 ) ) ; +#6140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6141 = FACE_OUTER_BOUND ( 'NONE', #70081, .T. ) ; +#6142 = EDGE_CURVE ( 'NONE', #3701, #51034, #53302, .T. ) ; +#6143 = ORIENTED_EDGE ( 'NONE', *, *, #24103, .F. ) ; +#6144 = ORIENTED_EDGE ( 'NONE', *, *, #60990, .T. ) ; +#6145 = CIRCLE ( 'NONE', #32431, 10.00000000000009400 ) ; +#6147 = EDGE_CURVE ( 'NONE', #65169, #19770, #511, .T. ) ; +#6146 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56379, #68902, #7980, #51480 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485554045809700E-007, 0.0009605145132142017000 ), + .UNSPECIFIED. ) ; +#6148 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#6150 = EDGE_LOOP ( 'NONE', ( #66672, #76070, #35503 ) ) ; +#6149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6151 = ORIENTED_EDGE ( 'NONE', *, *, #79435, .T. ) ; +#6152 = CARTESIAN_POINT ( 'NONE', ( -1.466819876342324100, 85.79999999999984100, -28.37307693585077600 ) ) ; +#6153 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#6154 = ORIENTED_EDGE ( 'NONE', *, *, #39585, .F. ) ; +#6155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6156 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#6157 = EDGE_CURVE ( 'NONE', #36778, #77841, #64800, .T. ) ; +#6158 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474188300, 38.73827450271715400, -28.47230003642277300 ) ) ; +#6159 = FACE_OUTER_BOUND ( 'NONE', #54972, .T. ) ; +#6160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6162 = EDGE_CURVE ( 'NONE', #36504, #68330, #38813, .T. ) ; +#6163 = ORIENTED_EDGE ( 'NONE', *, *, #60325, .T. ) ; +#6164 = AXIS2_PLACEMENT_3D ( 'NONE', #49513, #12315, #55800 ) ; +#6165 = CONICAL_SURFACE ( 'NONE', #37839, 10.00000000000009600, 0.7853981633974447300 ) ; +#6166 = ORIENTED_EDGE ( 'NONE', *, *, #1997, .T. ) ; +#6167 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 61.07757630314203100, -28.53861367218593500 ) ) ; +#6168 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 53.00000000000000700, 9.794441961969996100 ) ) ; +#6169 = ORIENTED_EDGE ( 'NONE', *, *, #72780, .T. ) ; +#6170 = ORIENTED_EDGE ( 'NONE', *, *, #29817, .T. ) ; +#6171 = ORIENTED_EDGE ( 'NONE', *, *, #9433, .T. ) ; +#6172 = CONICAL_SURFACE ( 'NONE', #66400, 10.50000000000009800, 0.7853981633974518300 ) ; +#6173 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 18.16666666666667100, -6.205558038030004800 ) ) ; +#6174 = AXIS2_PLACEMENT_3D ( 'NONE', #37641, #396, #43889 ) ; +#6175 = ORIENTED_EDGE ( 'NONE', *, *, #61472, .T. ) ; +#6176 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6177 = EDGE_CURVE ( 'NONE', #42911, #2993, #24401, .T. ) ; +#6178 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7710, #51197, #57506, #20248 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.858000101131009600E-017, 0.001179148174663204100 ), + .UNSPECIFIED. ) ; +#6179 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6180 = EDGE_CURVE ( 'NONE', #49628, #71000, #9926, .T. ) ; +#6181 = AXIS2_PLACEMENT_3D ( 'NONE', #60469, #78964, #23188 ) ; +#6182 = ORIENTED_EDGE ( 'NONE', *, *, #22248, .F. ) ; +#6183 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#6184 = ORIENTED_EDGE ( 'NONE', *, *, #14744, .T. ) ; +#6185 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818076400, 59.94924284854686600, -28.20555803803047800 ) ) ; +#6186 = CIRCLE ( 'NONE', #72215, 9.500000000000095900 ) ; +#6187 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 41.49769010897086500, -28.61774594594330900 ) ) ; +#6188 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 20.50000000000000700, 6.847000845227641200 ) ) ; +#6189 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000416600, 68.17143691309409800, -28.36981695106809600 ) ) ; +#6190 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#6191 = EDGE_CURVE ( 'NONE', #77979, #22368, #31687, .T. ) ; +#6192 = AXIS2_PLACEMENT_3D ( 'NONE', #78073, #40788, #3520 ) ; +#6193 = AXIS2_PLACEMENT_3D ( 'NONE', #19969, #63497, #26245 ) ; +#6194 = CARTESIAN_POINT ( 'NONE', ( 2.710924119904684700, 7.615022776544384100, -28.44796972294024700 ) ) ; +#6195 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13754, #50944, #7446, #57239 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082129087100E-007, 0.0007679735311067985400 ), + .UNSPECIFIED. ) ; +#6196 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#6197 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6198 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#6199 = CONICAL_SURFACE ( 'NONE', #65954, 10.00000000000009400, 0.7853981633974447300 ) ; +#6200 = ADVANCED_FACE ( 'NONE', ( #48187 ), #29766, .T. ) ; +#6201 = AXIS2_PLACEMENT_3D ( 'NONE', #66517, #29294, #72779 ) ; +#6202 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 80.90033558196108700, -28.70555803802997700 ) ) ; +#6203 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6204 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124984900, 56.46717019299481400, -28.53914313452737900 ) ) ; +#6206 = ORIENTED_EDGE ( 'NONE', *, *, #60634, .T. ) ; +#6205 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 81.25732391202397800, -28.20555803802997700 ) ) ; +#6207 = ADVANCED_FACE ( 'NONE', ( #15126 ), #77407, .F. ) ; +#6208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6209 = EDGE_LOOP ( 'NONE', ( #53473, #12660, #78498, #25376 ) ) ; +#6210 = ADVANCED_FACE ( 'NONE', ( #46237 ), #44269, .T. ) ; +#6211 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465442200, 30.10079448659600100, -28.70555803802995200 ) ) ; +#6212 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6214 = FACE_OUTER_BOUND ( 'NONE', #4768, .T. ) ; +#6215 = AXIS2_PLACEMENT_3D ( 'NONE', #31590, #75102, #37801 ) ; +#6216 = ORIENTED_EDGE ( 'NONE', *, *, #66228, .F. ) ; +#6217 = CONICAL_SURFACE ( 'NONE', #29481, 10.00000000000009200, 0.7853981633974447300 ) ; +#6218 = ORIENTED_EDGE ( 'NONE', *, *, #12552, .F. ) ; +#6219 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 24.00000000000000700, -1.205558038030005300 ) ) ; +#6220 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#6221 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6222 = CIRCLE ( 'NONE', #3704, 10.00000000000009200 ) ; +#6223 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #959, #13504, #32250, #75752 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764792089620600E-007, 0.0009376791149928006200 ), + .UNSPECIFIED. ) ; +#6224 = ORIENTED_EDGE ( 'NONE', *, *, #62778, .F. ) ; +#6225 = ORIENTED_EDGE ( 'NONE', *, *, #66349, .T. ) ; +#6226 = ORIENTED_EDGE ( 'NONE', *, *, #33415, .T. ) ; +#6227 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 65.79999999999999700, -28.20555803802997700 ) ) ; +#6228 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#6229 = AXIS2_PLACEMENT_3D ( 'NONE', #58578, #8784, #70276 ) ; +#6230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6233 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819633000, 51.65075715145291500, -28.20555803803005900 ) ) ; +#6234 = EDGE_CURVE ( 'NONE', #77240, #13816, #62837, .T. ) ; +#6235 = CONICAL_SURFACE ( 'NONE', #27412, 10.50000000000009600, 0.7853981633974500600 ) ; +#6236 = CARTESIAN_POINT ( 'NONE', ( -9.760105492672039400, 81.93585231025913600, -28.38420446581266200 ) ) ; +#6237 = VERTEX_POINT ( 'NONE', #41706 ) ; +#6238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6239 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374512300, 19.55638278624866900, -28.44857805373786900 ) ) ; +#6240 = CIRCLE ( 'NONE', #50804, 10.00000000000009400 ) ; +#6241 = AXIS2_PLACEMENT_3D ( 'NONE', #58510, #45970, #27532 ) ; +#6242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6243 = VERTEX_POINT ( 'NONE', #72758 ) ; +#6244 = ORIENTED_EDGE ( 'NONE', *, *, #57823, .T. ) ; +#6245 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#6246 = ORIENTED_EDGE ( 'NONE', *, *, #65355, .T. ) ; +#6247 = ORIENTED_EDGE ( 'NONE', *, *, #8557, .F. ) ; +#6248 = CIRCLE ( 'NONE', #23626, 10.50000000000009800 ) ; +#6249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6250 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655445700, 10.17701665379220800, -28.20555803802993500 ) ) ; +#6251 = EDGE_LOOP ( 'NONE', ( #36030, #49364, #27713, #51271 ) ) ; +#6252 = EDGE_CURVE ( 'NONE', #54480, #19662, #79376, .T. ) ; +#6253 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356200, 80.79999999999968500, -28.55171188418412200 ) ) ; +#6254 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#6255 = ORIENTED_EDGE ( 'NONE', *, *, #15202, .T. ) ; +#6256 = CIRCLE ( 'NONE', #22627, 10.00000000000009600 ) ; +#6257 = EDGE_CURVE ( 'NONE', #29074, #34438, #66737, .T. ) ; +#6258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6259 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 67.66666666666665700, 3.124568980892192800 ) ) ; +#6260 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 90.16054007504462200, -28.34042301926884400 ) ) ; +#6261 = EDGE_CURVE ( 'NONE', #53776, #20598, #50127, .T. ) ; +#6262 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34140, #71392, #40371, #3109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.810535519880076800E-017, 0.001246264537621179100 ), + .UNSPECIFIED. ) ; +#6263 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819196400, 79.94924284854674600, -28.20555803802997700 ) ) ; +#6264 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 32.66666666666667900, 5.722645192245505700 ) ) ; +#6265 = EDGE_CURVE ( 'NONE', #50525, #78314, #60893, .T. ) ; +#6266 = AXIS2_PLACEMENT_3D ( 'NONE', #2847, #46340, #9089 ) ; +#6267 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 71.46283204837338600, -28.48697406221667400 ) ) ; +#6268 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 87.92318720225496500, -28.70555803802997700 ) ) ; +#6269 = CIRCLE ( 'NONE', #69462, 9.500000000000101300 ) ; +#6270 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#6271 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 70.00000000000001400, -12.20555803803000200 ) ) ; +#6272 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6274 = ORIENTED_EDGE ( 'NONE', *, *, #66555, .T. ) ; +#6275 = AXIS2_PLACEMENT_3D ( 'NONE', #10786, #66539, #54280 ) ; +#6277 = ORIENTED_EDGE ( 'NONE', *, *, #44338, .F. ) ; +#6276 = EDGE_CURVE ( 'NONE', #30876, #16633, #13200, .T. ) ; +#6278 = EDGE_CURVE ( 'NONE', #55473, #32412, #76229, .T. ) ; +#6279 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 10.06248377813452100, -28.32723995587590700 ) ) ; +#6280 = EDGE_CURVE ( 'NONE', #39176, #51373, #27804, .T. ) ; +#6281 = EDGE_LOOP ( 'NONE', ( #65431, #28914, #63711, #72689, #10718 ) ) ; +#6282 = ADVANCED_FACE ( 'NONE', ( #11249 ), #56967, .F. ) ; +#6283 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290088600, 10.03732497909459000, -28.41043597897464300 ) ) ; +#6284 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#6285 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000000400, 81.43250300240228500, -28.20555803802997700 ) ) ; +#6286 = FACE_OUTER_BOUND ( 'NONE', #41471, .T. ) ; +#6287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6288 = CIRCLE ( 'NONE', #20037, 9.500000000000095900 ) ; +#6289 = ORIENTED_EDGE ( 'NONE', *, *, #75849, .F. ) ; +#6290 = AXIS2_PLACEMENT_3D ( 'NONE', #43382, #6134, #49618 ) ; +#6291 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105233100, 71.31766786975316600, -28.25051428653882000 ) ) ; +#6292 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801553300, 80.69966441803865100, -28.70555803803030800 ) ) ; +#6293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6294 = ORIENTED_EDGE ( 'NONE', *, *, #31682, .F. ) ; +#6295 = FACE_OUTER_BOUND ( 'NONE', #29301, .T. ) ; +#6296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6297 = FACE_OUTER_BOUND ( 'NONE', #61848, .T. ) ; +#6298 = CARTESIAN_POINT ( 'NONE', ( 17.32934156052453300, 71.13134338025904000, -28.43089930266687700 ) ) ; +#6299 = ORIENTED_EDGE ( 'NONE', *, *, #14044, .F. ) ; +#6300 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 81.22294471194857100, -28.20555803803047800 ) ) ; +#6301 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#6302 = EDGE_CURVE ( 'NONE', #42642, #45855, #61794, .T. ) ; +#6304 = EDGE_LOOP ( 'NONE', ( #21715, #5771, #3735, #41528 ) ) ; +#6303 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#6305 = ADVANCED_FACE ( 'NONE', ( #25845 ), #23891, .F. ) ; +#6306 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 75.79999999999950000, -28.20555803803047800 ) ) ; +#6307 = AXIS2_PLACEMENT_3D ( 'NONE', #14137, #76127, #26660 ) ; +#6308 = AXIS2_PLACEMENT_3D ( 'NONE', #54096, #16852, #60387 ) ; +#6309 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6310 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971600, 66.44146991525258300, -28.52629299565627000 ) ) ; +#6311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6312 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.23796787468680200, -28.38801640354855800 ) ) ; +#6313 = CONICAL_SURFACE ( 'NONE', #27909, 10.00000000000009200, 0.7853981633974447300 ) ; +#6314 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#6315 = ORIENTED_EDGE ( 'NONE', *, *, #19065, .T. ) ; +#6316 = CIRCLE ( 'NONE', #68006, 10.00000000000009200 ) ; +#6317 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567176700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#6318 = ORIENTED_EDGE ( 'NONE', *, *, #59028, .T. ) ; +#6319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6320 = ORIENTED_EDGE ( 'NONE', *, *, #16388, .T. ) ; +#6321 = ORIENTED_EDGE ( 'NONE', *, *, #34799, .F. ) ; +#6322 = ORIENTED_EDGE ( 'NONE', *, *, #68452, .F. ) ; +#6323 = ORIENTED_EDGE ( 'NONE', *, *, #4232, .F. ) ; +#6324 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428612000, 20.52858243452102400, -28.70555803802995200 ) ) ; +#6325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48079, #68437, #6420, #49897 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711498850800E-007, 0.0008482615949374496800 ), + .UNSPECIFIED. ) ; +#6326 = VERTEX_POINT ( 'NONE', #49015 ) ; +#6327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6328 = CONICAL_SURFACE ( 'NONE', #67340, 10.50000000000009600, 0.7853981633974500600 ) ; +#6329 = CARTESIAN_POINT ( 'NONE', ( 9.466255859631179000, 91.59999999999999400, -28.70555803802999500 ) ) ; +#6330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6331 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 70.34267608797603100, -28.20555803802997700 ) ) ; +#6332 = ORIENTED_EDGE ( 'NONE', *, *, #30733, .T. ) ; +#6333 = AXIS2_PLACEMENT_3D ( 'NONE', #5697, #61752, #74268 ) ; +#6334 = EDGE_LOOP ( 'NONE', ( #74546, #55093, #47947, #40467 ) ) ; +#6335 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985145300, 25.50238095238092500, -28.70555803802994200 ) ) ; +#6336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6337 = ADVANCED_FACE ( 'NONE', ( #40403 ), #71566, .T. ) ; +#6338 = ORIENTED_EDGE ( 'NONE', *, *, #24166, .T. ) ; +#6339 = ORIENTED_EDGE ( 'NONE', *, *, #17615, .T. ) ; +#6340 = AXIS2_PLACEMENT_3D ( 'NONE', #41652, #4398, #47894 ) ; +#6341 = ORIENTED_EDGE ( 'NONE', *, *, #48918, .F. ) ; +#6342 = CIRCLE ( 'NONE', #56449, 10.00000000000009400 ) ; +#6343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6344 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 38.66666666666668600, -5.205558038030003100 ) ) ; +#6345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6346 = AXIS2_PLACEMENT_3D ( 'NONE', #1390, #28792, #72282 ) ; +#6347 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 32.70037755566824000, -28.53664883431609000 ) ) ; +#6348 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6349 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658318000, 71.44848545219039700, -28.67627428870433100 ) ) ; +#6350 = CONICAL_SURFACE ( 'NONE', #49065, 10.50000000000009600, 0.7853981633974500600 ) ; +#6351 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#6352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6353 = ORIENTED_EDGE ( 'NONE', *, *, #20316, .F. ) ; +#6354 = CYLINDRICAL_SURFACE ( 'NONE', #24941, 10.00000000000000200 ) ; +#6355 = VERTEX_POINT ( 'NONE', #18057 ) ; +#6356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#6357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6358 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#6359 = CARTESIAN_POINT ( 'NONE', ( 17.31587870724581500, 39.47683288890992500, -28.43418176890224600 ) ) ; +#6360 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 10.00000000000001100, -1.205558038030002800 ) ) ; +#6361 = CONICAL_SURFACE ( 'NONE', #72437, 10.00000000000009400, 0.7853981633974447300 ) ; +#6362 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6363 = CIRCLE ( 'NONE', #38684, 10.50000000000009600 ) ; +#6364 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489640200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#6366 = EDGE_CURVE ( 'NONE', #71797, #77030, #47283, .T. ) ; +#6365 = ORIENTED_EDGE ( 'NONE', *, *, #61091, .T. ) ; +#6367 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3984, #78545, #16512, #60044 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082045858500E-007, 0.001119323292485938700 ), + .UNSPECIFIED. ) ; +#6368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6369 = EDGE_CURVE ( 'NONE', #71810, #15003, #9253, .T. ) ; +#6370 = FACE_OUTER_BOUND ( 'NONE', #32273, .T. ) ; +#6371 = ORIENTED_EDGE ( 'NONE', *, *, #58942, .T. ) ; +#6372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6374 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58335, #58062, #64616, #27359 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037045122468718400E-007, 0.0004669856434888624000 ), + .UNSPECIFIED. ) ; +#6375 = ORIENTED_EDGE ( 'NONE', *, *, #6637, .F. ) ; +#6376 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343277900, 49.85339758437807900, -28.20555803802996700 ) ) ; +#6377 = EDGE_CURVE ( 'NONE', #2940, #54053, #32848, .T. ) ; +#6378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6379 = FACE_OUTER_BOUND ( 'NONE', #9829, .T. ) ; +#6380 = ADVANCED_FACE ( 'NONE', ( #42346 ), #55007, .T. ) ; +#6381 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6382 = EDGE_CURVE ( 'NONE', #23878, #49285, #18401, .T. ) ; +#6383 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50927, #7426, #19973, #63499 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829864400199800E-007, 0.001052545149296793500 ), + .UNSPECIFIED. ) ; +#6385 = FACE_OUTER_BOUND ( 'NONE', #22492, .T. ) ; +#6384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6386 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000048000, 18.36203212531224300, -28.38801640354843800 ) ) ; +#6387 = ORIENTED_EDGE ( 'NONE', *, *, #33548, .T. ) ; +#6388 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 44.50000000000000700, 2.454695999814385600 ) ) ; +#6389 = EDGE_CURVE ( 'NONE', #33093, #28682, #3926, .T. ) ; +#6390 = ORIENTED_EDGE ( 'NONE', *, *, #74219, .T. ) ; +#6391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6392 = EDGE_LOOP ( 'NONE', ( #29461, #59726, #20344, #18326 ) ) ; +#6393 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#6394 = ORIENTED_EDGE ( 'NONE', *, *, #45302, .T. ) ; +#6395 = ORIENTED_EDGE ( 'NONE', *, *, #66824, .F. ) ; +#6396 = ADVANCED_FACE ( 'NONE', ( #73523 ), #69593, .F. ) ; +#6397 = FACE_OUTER_BOUND ( 'NONE', #1929, .T. ) ; +#6398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6399 = ORIENTED_EDGE ( 'NONE', *, *, #18309, .F. ) ; +#6400 = AXIS2_PLACEMENT_3D ( 'NONE', #72021, #59208, #59503 ) ; +#6401 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59835, #4053, #22824, #66351 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0002673660010786253100 ), + .UNSPECIFIED. ) ; +#6403 = EDGE_CURVE ( 'NONE', #39774, #50545, #70235, .T. ) ; +#6404 = EDGE_CURVE ( 'NONE', #15972, #54616, #55775, .T. ) ; +#6405 = EDGE_CURVE ( 'NONE', #30748, #20135, #5376, .T. ) ; +#6406 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709905000, 20.53732497909461700, -28.41043597897460800 ) ) ; +#6407 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 10.12753447840916400, -28.38801640354880000 ) ) ; +#6408 = CIRCLE ( 'NONE', #69090, 10.50000000000009200 ) ; +#6409 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566305200, 14.04999999999987800, -28.70555803803009500 ) ) ; +#6410 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#6411 = AXIS2_PLACEMENT_3D ( 'NONE', #43959, #6734, #50220 ) ; +#6412 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#6413 = ADVANCED_FACE ( 'NONE', ( #21928 ), #19980, .F. ) ; +#6414 = EDGE_LOOP ( 'NONE', ( #11730, #76546, #15062 ) ) ; +#6415 = ADVANCED_FACE ( 'NONE', ( #7295 ), #67662, .F. ) ; +#6416 = FACE_OUTER_BOUND ( 'NONE', #11793, .T. ) ; +#6417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6418 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528425300, 28.63131911501858100, -28.51286550264480400 ) ) ; +#6419 = AXIS2_PLACEMENT_3D ( 'NONE', #60271, #22994, #66513 ) ; +#6420 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 43.20037755566824000, -28.53664883431610000 ) ) ; +#6421 = AXIS2_PLACEMENT_3D ( 'NONE', #48650, #61226, #23956 ) ; +#6422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6424 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.44142842854296700, -28.20555803802994200 ) ) ; +#6425 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46509, #14743, #77565, #9270 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001738906318342037100, 0.001775972851782364100 ), + .UNSPECIFIED. ) ; +#6426 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.16749699759768800, -28.20555803802995200 ) ) ; +#6427 = ADVANCED_FACE ( 'NONE', ( #36495 ), #53042, .T. ) ; +#6428 = CIRCLE ( 'NONE', #62109, 10.00000000000009400 ) ; +#6429 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6430 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 50.83333333333335000, -12.20555803803000600 ) ) ; +#6431 = CONICAL_SURFACE ( 'NONE', #55603, 10.00000000000009600, 0.7853981633974482800 ) ; +#6432 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658419200, 70.15151454780948400, -28.67627428870426300 ) ) ; +#6433 = EDGE_LOOP ( 'NONE', ( #1283, #43620, #62841, #57001 ) ) ; +#6434 = FACE_OUTER_BOUND ( 'NONE', #75469, .T. ) ; +#6435 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 16.00000000000000400, 3.794441961969998300 ) ) ; +#6436 = AXIS2_PLACEMENT_3D ( 'NONE', #60858, #23595, #67099 ) ; +#6437 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000483200, 18.69949493661176400, -28.70555803803009500 ) ) ; +#6438 = ORIENTED_EDGE ( 'NONE', *, *, #9085, .F. ) ; +#6439 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 81.25732391202386400, -28.20555803803014400 ) ) ; +#6440 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709903000, 39.06267502090537400, -28.41043597897460100 ) ) ; +#6441 = FACE_OUTER_BOUND ( 'NONE', #42695, .T. ) ; +#6442 = FACE_OUTER_BOUND ( 'NONE', #73133, .T. ) ; +#6443 = ORIENTED_EDGE ( 'NONE', *, *, #62646, .T. ) ; +#6444 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#6445 = EDGE_CURVE ( 'NONE', #27271, #68982, #41328, .T. ) ; +#6446 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 18.33333333333333900, -10.73183747965883100 ) ) ; +#6447 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6448 = AXIS2_PLACEMENT_3D ( 'NONE', #40363, #3096, #46588 ) ; +#6449 = VERTEX_POINT ( 'NONE', #50351 ) ; +#6450 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390318300, 90.13716795162640900, -28.48697406221641500 ) ) ; +#6451 = ORIENTED_EDGE ( 'NONE', *, *, #38018, .F. ) ; +#6452 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 38.92298334620762300, -28.20555803802996700 ) ) ; +#6453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6454 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#6455 = CONICAL_SURFACE ( 'NONE', #16327, 10.50000000000009900, 0.7853981633974518300 ) ; +#6456 = VERTEX_POINT ( 'NONE', #31907 ) ; +#6457 = AXIS2_PLACEMENT_3D ( 'NONE', #47547, #4069, #34832 ) ; +#6458 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#6459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6460 = VERTEX_POINT ( 'NONE', #75423 ) ; +#6461 = EDGE_LOOP ( 'NONE', ( #59390, #65213, #51463, #9384 ) ) ; +#6462 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 69.94924284854742800, -28.20555803802997700 ) ) ; +#6463 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265454500, 70.27440177985819500, -28.29986836858019200 ) ) ; +#6464 = EDGE_LOOP ( 'NONE', ( #23074, #28752, #33493, #44561 ) ) ; +#6465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#6466 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#6467 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146282700, 90.34267608797584600, -28.20555803803047800 ) ) ; +#6468 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#6469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6470 = CONICAL_SURFACE ( 'NONE', #44265, 10.50000000000009200, 0.7853981633974482800 ) ; +#6471 = FACE_OUTER_BOUND ( 'NONE', #47777, .T. ) ; +#6472 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567900, 83.66464174796074400, -28.53896444442199600 ) ) ; +#6473 = ORIENTED_EDGE ( 'NONE', *, *, #50831, .T. ) ; +#6474 = ADVANCED_FACE ( 'NONE', ( #38423 ), #34582, .T. ) ; +#6475 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #12767 ) ; +#6476 = CARTESIAN_POINT ( 'NONE', ( -15.24414149058161700, 9.877929254709190600, -28.70257734043093800 ) ) ; +#6478 = ORIENTED_EDGE ( 'NONE', *, *, #68703, .T. ) ; +#6477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50560, #69355, #7326, #50829 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401251300, 0.004682530427070980000 ), + .UNSPECIFIED. ) ; +#6479 = CARTESIAN_POINT ( 'NONE', ( -3.371507771243923200, 81.43250300240228500, -28.25053031809460100 ) ) ; +#6480 = CIRCLE ( 'NONE', #19538, 5.000000000000000900 ) ; +#6481 = ORIENTED_EDGE ( 'NONE', *, *, #30496, .T. ) ; +#6482 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754300, 39.70543520232828200, -28.70555803802995200 ) ) ; +#6483 = EDGE_CURVE ( 'NONE', #21936, #33956, #26885, .T. ) ; +#6484 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 21.83333333333334600, 0.9380355014189731800 ) ) ; +#6485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6486 = ORIENTED_EDGE ( 'NONE', *, *, #3886, .T. ) ; +#6487 = CIRCLE ( 'NONE', #57414, 10.50000000000009600 ) ; +#6488 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44105, #619, #13177, #56659 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247636128000, 0.0009605145132133929900 ), + .UNSPECIFIED. ) ; +#6489 = CIRCLE ( 'NONE', #49087, 9.500000000000097700 ) ; +#6490 = ADVANCED_FACE ( 'NONE', ( #3400 ), #49120, .T. ) ; +#6491 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650639200, 39.08087956867520100, -28.30223257055573400 ) ) ; +#6492 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844501000, 75.46616414991839900, -28.37247596307076600 ) ) ; +#6493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6494 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388400, 39.16349705304866500, -28.30782889147481300 ) ) ; +#6495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27346, #70822, #46050, #8788 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248701365400, 0.0006725414583656323700 ), + .UNSPECIFIED. ) ; +#6496 = ORIENTED_EDGE ( 'NONE', *, *, #18661, .F. ) ; +#6497 = CARTESIAN_POINT ( 'NONE', ( 15.02626848327762400, 65.71754128061462600, -28.70555803803001600 ) ) ; +#6498 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 42.97376207875059600, -28.70555803802997700 ) ) ; +#6499 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6500 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6501 = EDGE_CURVE ( 'NONE', #11933, #72415, #12428, .T. ) ; +#6502 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.46616414991824200, -28.37247596307094000 ) ) ; +#6503 = EDGE_CURVE ( 'NONE', #31405, #28672, #65723, .T. ) ; +#6504 = CONICAL_SURFACE ( 'NONE', #33371, 10.50000000000009600, 0.7853981633974500600 ) ; +#6505 = ORIENTED_EDGE ( 'NONE', *, *, #32816, .T. ) ; +#6506 = ADVANCED_FACE ( 'NONE', ( #18023 ), #32606, .T. ) ; +#6507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #887, #7143, #25954, #69435 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200790002000, 0.0008866563355347445100 ), + .UNSPECIFIED. ) ; +#6508 = CONICAL_SURFACE ( 'NONE', #39401, 10.00000000000009200, 0.7853981633974447300 ) ; +#6509 = CARTESIAN_POINT ( 'NONE', ( 9.760105492672007400, 81.93585231025858200, -28.38420446581276800 ) ) ; +#6510 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#6511 = ORIENTED_EDGE ( 'NONE', *, *, #27011, .F. ) ; +#6512 = CONICAL_SURFACE ( 'NONE', #69143, 10.00000000000009400, 0.7853981633974447300 ) ; +#6513 = EDGE_CURVE ( 'NONE', #26983, #53533, #78748, .T. ) ; +#6514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6515 = EDGE_CURVE ( 'NONE', #14429, #68193, #64297, .T. ) ; +#6517 = ORIENTED_EDGE ( 'NONE', *, *, #67639, .F. ) ; +#6516 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#6518 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80003, #73757, #30260, #5477 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722413562300E-007, 0.0002592600401783426800 ), + .UNSPECIFIED. ) ; +#6519 = EDGE_CURVE ( 'NONE', #32387, #66645, #51062, .T. ) ; +#6520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6521 = ADVANCED_FACE ( 'NONE', ( #58904 ), #14118, .T. ) ; +#6522 = CIRCLE ( 'NONE', #56676, 10.00000000000009400 ) ; +#6523 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #43555, #6319 ) ; +#6524 = FACE_OUTER_BOUND ( 'NONE', #926, .T. ) ; +#6525 = ORIENTED_EDGE ( 'NONE', *, *, #63476, .F. ) ; +#6526 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#6527 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6528 = EDGE_LOOP ( 'NONE', ( #30456, #51856, #12544 ) ) ; +#6529 = ADVANCED_FACE ( 'NONE', ( #80307 ), #75456, .T. ) ; +#6530 = AXIS2_PLACEMENT_3D ( 'NONE', #13356, #63117, #50557 ) ; +#6531 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 65.50000000000000000, -4.865812075874393000 ) ) ; +#6532 = AXIS2_PLACEMENT_3D ( 'NONE', #42595, #48844, #79889 ) ; +#6533 = AXIS2_PLACEMENT_3D ( 'NONE', #48914, #11702, #55186 ) ; +#6534 = CARTESIAN_POINT ( 'NONE', ( -1.283695372222837200E-013, 15.94142842854310700, -28.20555803802992800 ) ) ; +#6535 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#6536 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 30.50000000000000000, -7.061964498581022400 ) ) ; +#6537 = FACE_OUTER_BOUND ( 'NONE', #48978, .T. ) ; +#6538 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 73.65857157145681800, -28.20555803803047800 ) ) ; +#6539 = ORIENTED_EDGE ( 'NONE', *, *, #78285, .F. ) ; +#6540 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#6541 = ORIENTED_EDGE ( 'NONE', *, *, #47752, .T. ) ; +#6542 = CARTESIAN_POINT ( 'NONE', ( -9.572261083207317600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#6543 = ORIENTED_EDGE ( 'NONE', *, *, #9085, .T. ) ; +#6544 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 67.83333333333335700, 9.794441961969999600 ) ) ; +#6545 = ORIENTED_EDGE ( 'NONE', *, *, #50060, .T. ) ; +#6546 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 39.24722181384565500, -28.70555803802998400 ) ) ; +#6547 = CONICAL_SURFACE ( 'NONE', #23966, 10.50000000000009600, 0.7853981633974518300 ) ; +#6548 = AXIS2_PLACEMENT_3D ( 'NONE', #34663, #78172, #40898 ) ; +#6549 = ORIENTED_EDGE ( 'NONE', *, *, #33317, .T. ) ; +#6550 = EDGE_CURVE ( 'NONE', #48416, #3004, #47168, .T. ) ; +#6551 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18168, #74221, #12196, #55676 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941253100, 0.001517194977238255500 ), + .UNSPECIFIED. ) ; +#6552 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555626100, 69.72166103827312600, -28.53892303408241900 ) ) ; +#6553 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 30.94069092601377900, -28.35186440610858600 ) ) ; +#6554 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905800, 54.83849307182666200, -28.68631150211663400 ) ) ; +#6555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6556 = CONICAL_SURFACE ( 'NONE', #32512, 10.00000000000009200, 0.7853981633974447300 ) ; +#6557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6558 = VERTEX_POINT ( 'NONE', #70218 ) ; +#6559 = ORIENTED_EDGE ( 'NONE', *, *, #43645, .T. ) ; +#6560 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 71.43945992495501700, -28.34042301926918800 ) ) ; +#6561 = EDGE_CURVE ( 'NONE', #71340, #75777, #63772, .T. ) ; +#6562 = ORIENTED_EDGE ( 'NONE', *, *, #49487, .F. ) ; +#6563 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050734900, 17.57379779496201500, -28.70555803803025800 ) ) ; +#6564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6566 = AXIS2_PLACEMENT_3D ( 'NONE', #53051, #59332, #9541 ) ; +#6567 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823716300, 10.90456253568389200, -28.61277292027073600 ) ) ; +#6568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6569 = CONICAL_SURFACE ( 'NONE', #63680, 10.00000000000009200, 0.7853981633974447300 ) ; +#6570 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#6571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6573 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6574 = EDGE_LOOP ( 'NONE', ( #41829, #17415, #19149 ) ) ; +#6575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6576 = PLANE ( 'NONE', #29877 ) ; +#6577 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466686100, 38.80869142985028500, -28.37223374938522400 ) ) ; +#6578 = AXIS2_PLACEMENT_3D ( 'NONE', #37531, #6287, #18803 ) ; +#6579 = CARTESIAN_POINT ( 'NONE', ( -3.221157914412283900, 30.93523632220588100, -28.30315276798566200 ) ) ; +#6580 = FACE_OUTER_BOUND ( 'NONE', #13028, .T. ) ; +#6581 = VERTEX_POINT ( 'NONE', #8189 ) ; +#6582 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614819300, 20.60677350908857600, -28.30799595738880500 ) ) ; +#6583 = FACE_OUTER_BOUND ( 'NONE', #29823, .T. ) ; +#6584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6586 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868449700, 9.584862158797708500, -28.32821106612163600 ) ) ; +#6587 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6778, #44000, #25571, #69066 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571827500, 0.0008043487657982744900 ), + .UNSPECIFIED. ) ; +#6588 = CARTESIAN_POINT ( 'NONE', ( 12.68596550977832200, 45.54999999999998300, -28.37321477197631500 ) ) ; +#6589 = ORIENTED_EDGE ( 'NONE', *, *, #48402, .T. ) ; +#6590 = EDGE_CURVE ( 'NONE', #42888, #68193, #49765, .T. ) ; +#6591 = CONICAL_SURFACE ( 'NONE', #61488, 10.00000000000009400, 0.7853981633974447300 ) ; +#6592 = ORIENTED_EDGE ( 'NONE', *, *, #43227, .T. ) ; +#6593 = ADVANCED_FACE ( 'NONE', ( #30680 ), #76386, .T. ) ; +#6594 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 60.52242369685793500, -28.53861367218593500 ) ) ; +#6595 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61498, #17962, #74002, #36707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192576567800 ), + .UNSPECIFIED. ) ; +#6596 = ADVANCED_FACE ( 'NONE', ( #16076 ), #43283, .T. ) ; +#6597 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 36.50000000000001400, 4.650848422521012700 ) ) ; +#6598 = ORIENTED_EDGE ( 'NONE', *, *, #40206, .T. ) ; +#6599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6600 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#6601 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#6602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6603 = ADVANCED_FACE ( 'NONE', ( #28766 ), #10218, .F. ) ; +#6604 = CIRCLE ( 'NONE', #17612, 9.500000000000097700 ) ; +#6605 = CONICAL_SURFACE ( 'NONE', #35515, 10.50000000000009800, 0.7853981633974518300 ) ; +#6606 = EDGE_LOOP ( 'NONE', ( #21550, #15628, #13467 ) ) ; +#6608 = EDGE_CURVE ( 'NONE', #51761, #31548, #26771, .T. ) ; +#6607 = VERTEX_POINT ( 'NONE', #33507 ) ; +#6609 = ORIENTED_EDGE ( 'NONE', *, *, #36618, .T. ) ; +#6610 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462811600, 60.34267608797633600, -28.20555803803030800 ) ) ; +#6611 = ORIENTED_EDGE ( 'NONE', *, *, #45050, .T. ) ; +#6612 = ORIENTED_EDGE ( 'NONE', *, *, #73983, .F. ) ; +#6613 = ORIENTED_EDGE ( 'NONE', *, *, #30064, .T. ) ; +#6614 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#6615 = AXIS2_PLACEMENT_3D ( 'NONE', #26204, #13701, #1412 ) ; +#6616 = VERTEX_POINT ( 'NONE', #77021 ) ; +#6617 = EDGE_CURVE ( 'NONE', #18527, #67441, #61831, .T. ) ; +#6618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6619 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#6620 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6622 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 7.833333333333339300, -4.152999154772353500 ) ) ; +#6623 = EDGE_CURVE ( 'NONE', #31243, #71559, #78368, .T. ) ; +#6624 = FACE_OUTER_BOUND ( 'NONE', #62237, .T. ) ; +#6625 = AXIS2_PLACEMENT_3D ( 'NONE', #61182, #17382, #73681 ) ; +#6626 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6627 = EDGE_LOOP ( 'NONE', ( #77779, #25017, #76380, #383, #63143, #41839 ) ) ; +#6628 = EDGE_LOOP ( 'NONE', ( #6876, #50069, #26475, #18930 ) ) ; +#6629 = CARTESIAN_POINT ( 'NONE', ( 10.63940720644215300, 39.16749699759768800, -28.25435056028471000 ) ) ; +#6630 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6631 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116428100, 20.39435118792235700, -28.41114655922299500 ) ) ; +#6632 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6633 = CIRCLE ( 'NONE', #39092, 9.500000000000099500 ) ; +#6634 = AXIS2_PLACEMENT_3D ( 'NONE', #44477, #13545, #25788 ) ; +#6635 = AXIS2_PLACEMENT_3D ( 'NONE', #47038, #53316, #3531 ) ; +#6636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6638 = ORIENTED_EDGE ( 'NONE', *, *, #75156, .T. ) ; +#6637 = EDGE_CURVE ( 'NONE', #70379, #36153, #35381, .T. ) ; +#6639 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37089, #74399, #43349, #6113 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697166273400E-007, 0.0008724363063898871800 ), + .UNSPECIFIED. ) ; +#6640 = EDGE_CURVE ( 'NONE', #30539, #46654, #20896, .T. ) ; +#6641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6643 = AXIS2_PLACEMENT_3D ( 'NONE', #12727, #56209, #18951 ) ; +#6642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6644 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284929600, 9.820334718100440300, -28.30868034705248700 ) ) ; +#6645 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#6646 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 42.33333333333334300, -3.705558038030004400 ) ) ; +#6647 = CIRCLE ( 'NONE', #63557, 10.00000000000009400 ) ; +#6648 = ORIENTED_EDGE ( 'NONE', *, *, #59897, .T. ) ; +#6649 = ORIENTED_EDGE ( 'NONE', *, *, #70725, .T. ) ; +#6650 = CARTESIAN_POINT ( 'NONE', ( 16.75662772119102000, 90.66714441618651700, -28.44931054370680100 ) ) ; +#6651 = ORIENTED_EDGE ( 'NONE', *, *, #19496, .T. ) ; +#6652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#6653 = EDGE_CURVE ( 'NONE', #44606, #7602, #6425, .T. ) ; +#6654 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.59999999999604400, -19.27500327626725300 ) ) ; +#6655 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528042058700, 73.65857157145704500, -28.37229765499294800 ) ) ; +#6656 = AXIS2_PLACEMENT_3D ( 'NONE', #27071, #39272, #26801 ) ; +#6657 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856812200, 63.67681279774481600, -28.70555803803014400 ) ) ; +#6658 = AXIS2_PLACEMENT_3D ( 'NONE', #40748, #72332, #72060 ) ; +#6659 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305480700, 38.70395328581638200, -28.70555803803002000 ) ) ; +#6660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6662 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136831000, 10.17041185698246500, -28.27321389036144700 ) ) ; +#6663 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#6664 = CARTESIAN_POINT ( 'NONE', ( -2.881082274201276900, 81.10238820582968300, -28.32098513914476000 ) ) ; +#6665 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 49.42298334620755900, -28.20555803802996700 ) ) ; +#6666 = CONICAL_SURFACE ( 'NONE', #74461, 10.50000000000009600, 0.7853981633974500600 ) ; +#6667 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.23796787468685900, -28.38801640354855100 ) ) ; +#6668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6669 = EDGE_LOOP ( 'NONE', ( #14492, #23944, #28388 ) ) ; +#6670 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57880, #45590, #64441, #27162 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786087643400E-007, 0.0007677775503743601100 ), + .UNSPECIFIED. ) ; +#6671 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489072700, 28.97143078992715800, -28.37063977681166400 ) ) ; +#6672 = ORIENTED_EDGE ( 'NONE', *, *, #25004, .T. ) ; +#6673 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#6674 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6675 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000063900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#6676 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#6677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6678 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 20.44069092601379400, -28.35186440610856100 ) ) ; +#6679 = ADVANCED_FACE ( 'NONE', ( #57902 ), #72514, .F. ) ; +#6680 = CONICAL_SURFACE ( 'NONE', #38881, 10.00000000000009400, 0.7853981633974447300 ) ; +#6681 = EDGE_LOOP ( 'NONE', ( #48047, #64591, #61361, #51196, #54936, #75546, #1937, #61047, #1967 ) ) ; +#6682 = FACE_OUTER_BOUND ( 'NONE', #58663, .T. ) ; +#6683 = AXIS2_PLACEMENT_3D ( 'NONE', #23543, #67068, #29846 ) ; +#6684 = ORIENTED_EDGE ( 'NONE', *, *, #80617, .T. ) ; +#6685 = ORIENTED_EDGE ( 'NONE', *, *, #22135, .F. ) ; +#6686 = ORIENTED_EDGE ( 'NONE', *, *, #51909, .T. ) ; +#6687 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 48.66666666666667100, 8.320721403598824400 ) ) ; +#6688 = FACE_OUTER_BOUND ( 'NONE', #24742, .T. ) ; +#6689 = VERTEX_POINT ( 'NONE', #52789 ) ; +#6690 = ORIENTED_EDGE ( 'NONE', *, *, #23813, .F. ) ; +#6691 = EDGE_LOOP ( 'NONE', ( #19715, #16239, #33257 ) ) ; +#6692 = ORIENTED_EDGE ( 'NONE', *, *, #35480, .T. ) ; +#6694 = ORIENTED_EDGE ( 'NONE', *, *, #36100, .T. ) ; +#6693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6695 = ADVANCED_FACE ( 'NONE', ( #8223 ), #39384, .T. ) ; +#6696 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 13.83333333333333700, -6.205558038030004800 ) ) ; +#6697 = AXIS2_PLACEMENT_3D ( 'NONE', #50214, #13010, #56496 ) ; +#6698 = VERTEX_POINT ( 'NONE', #40553 ) ; +#6699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6700 = CARTESIAN_POINT ( 'NONE', ( 11.74546181355822000, 39.09617548195245000, -28.64146967277533000 ) ) ; +#6701 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.78933626866495400, -28.53923937255172300 ) ) ; +#6702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6703 = EDGE_CURVE ( 'NONE', #61724, #33691, #72757, .T. ) ; +#6704 = ORIENTED_EDGE ( 'NONE', *, *, #47089, .T. ) ; +#6705 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.73796787468680200, -28.38801640354855500 ) ) ; +#6706 = FACE_OUTER_BOUND ( 'NONE', #74325, .T. ) ; +#6707 = ORIENTED_EDGE ( 'NONE', *, *, #3621, .T. ) ; +#6708 = EDGE_LOOP ( 'NONE', ( #56032, #75937, #54221 ) ) ; +#6709 = ORIENTED_EDGE ( 'NONE', *, *, #5339, .T. ) ; +#6710 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 57.60073525436789100, -28.70555803802999500 ) ) ; +#6711 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362703600, 54.03471854269753300, -28.66119098264626800 ) ) ; +#6712 = ORIENTED_EDGE ( 'NONE', *, *, #15928, .T. ) ; +#6713 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 16.16666666666667900, 9.794441961969994300 ) ) ; +#6714 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#6715 = ORIENTED_EDGE ( 'NONE', *, *, #64222, .F. ) ; +#6716 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6717 = FACE_OUTER_BOUND ( 'NONE', #79846, .T. ) ; +#6718 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#6719 = ORIENTED_EDGE ( 'NONE', *, *, #27510, .F. ) ; +#6721 = ADVANCED_FACE ( 'NONE', ( #55928 ), #6313, .T. ) ; +#6720 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40442, #53213, #72017, #34749 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143710019000, 0.0006599881756736394000 ), + .UNSPECIFIED. ) ; +#6722 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378045200, 50.77483928597535400, -28.57108397021914600 ) ) ; +#6723 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#6724 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925637500, 27.81967837323417600, -28.55467576046953900 ) ) ; +#6725 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846336700, 70.79999999999991200, -28.55171188418384500 ) ) ; +#6726 = CARTESIAN_POINT ( 'NONE', ( 16.15630527184532300, 93.91261054369064700, -28.43627145615189600 ) ) ; +#6727 = EDGE_CURVE ( 'NONE', #42511, #15109, #22865, .T. ) ; +#6728 = CIRCLE ( 'NONE', #4078, 10.50000000000009600 ) ; +#6729 = VERTEX_POINT ( 'NONE', #40833 ) ; +#6730 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#6731 = EDGE_CURVE ( 'NONE', #71810, #68463, #58265, .T. ) ; +#6732 = CARTESIAN_POINT ( 'NONE', ( -11.56182508409087700, 20.48385710212512500, -28.57719681746176500 ) ) ; +#6733 = EDGE_LOOP ( 'NONE', ( #76089, #31879, #76153, #38013 ) ) ; +#6734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6736 = ORIENTED_EDGE ( 'NONE', *, *, #55130, .F. ) ; +#6737 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274458500, 30.79377171558735400, -28.24172590004350200 ) ) ; +#6738 = EDGE_CURVE ( 'NONE', #64055, #46914, #43780, .T. ) ; +#6739 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#6740 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 20.44069092601377900, -28.35186440610857200 ) ) ; +#6741 = EDGE_CURVE ( 'NONE', #30197, #64791, #24820, .T. ) ; +#6742 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 80.34267608797600200, -28.20555803802997700 ) ) ; +#6743 = AXIS2_PLACEMENT_3D ( 'NONE', #16434, #47391, #53678 ) ; +#6744 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6745 = CIRCLE ( 'NONE', #70748, 10.00000000000009200 ) ; +#6746 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 19.66666666666667900, -5.205558038030003100 ) ) ; +#6747 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155800, 70.69966441803794100, -28.70555803803047500 ) ) ; +#6748 = CONICAL_SURFACE ( 'NONE', #27544, 10.00000000000009200, 0.7853981633974447300 ) ; +#6749 = ORIENTED_EDGE ( 'NONE', *, *, #71812, .F. ) ; +#6750 = CARTESIAN_POINT ( 'NONE', ( 15.16180434334074100, 9.919097828329633200, -28.70457623972511000 ) ) ; +#6751 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339032400, 81.46283204837304500, -28.48697406221690500 ) ) ; +#6752 = ORIENTED_EDGE ( 'NONE', *, *, #80405, .T. ) ; +#6753 = AXIS2_PLACEMENT_3D ( 'NONE', #7329, #13639, #57135 ) ; +#6754 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985400, 71.25732391202390700, -28.20555803802997700 ) ) ; +#6755 = EDGE_CURVE ( 'NONE', #23867, #62491, #74462, .T. ) ; +#6756 = EDGE_CURVE ( 'NONE', #45307, #77029, #45207, .T. ) ; +#6757 = CARTESIAN_POINT ( 'NONE', ( -10.97683272551928000, 18.08088969930761500, -28.30223898143232800 ) ) ; +#6758 = EDGE_CURVE ( 'NONE', #426, #31311, #29411, .T. ) ; +#6759 = AXIS2_PLACEMENT_3D ( 'NONE', #45724, #8471, #51970 ) ; +#6760 = FACE_OUTER_BOUND ( 'NONE', #21092, .T. ) ; +#6761 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#6762 = ORIENTED_EDGE ( 'NONE', *, *, #61348, .F. ) ; +#6763 = CONICAL_SURFACE ( 'NONE', #23967, 10.00000000000009400, 0.7853981633974447300 ) ; +#6764 = ORIENTED_EDGE ( 'NONE', *, *, #69786, .F. ) ; +#6765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6766 = VERTEX_POINT ( 'NONE', #16626 ) ; +#6767 = AXIS2_PLACEMENT_3D ( 'NONE', #77361, #27605, #9050 ) ; +#6768 = CARTESIAN_POINT ( 'NONE', ( 3.221157914412299000, 30.93523632220587800, -28.30315276798566200 ) ) ; +#6769 = CONICAL_SURFACE ( 'NONE', #66832, 10.50000000000009600, 0.7853981633974500600 ) ; +#6770 = ORIENTED_EDGE ( 'NONE', *, *, #32828, .T. ) ; +#6771 = AXIS2_PLACEMENT_3D ( 'NONE', #74604, #37298, #50 ) ; +#6772 = VERTEX_POINT ( 'NONE', #4101 ) ; +#6773 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24630, #49339, #55890, #18642 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572071581600E-007, 0.0007596410370205291400 ), + .UNSPECIFIED. ) ; +#6774 = VERTEX_POINT ( 'NONE', #10105 ) ; +#6775 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846336700, 70.79999999999991200, -28.55171188418384500 ) ) ; +#6776 = ORIENTED_EDGE ( 'NONE', *, *, #45889, .T. ) ; +#6777 = ORIENTED_EDGE ( 'NONE', *, *, #66352, .F. ) ; +#6778 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 10.18929190448942600, -28.20555803802994200 ) ) ; +#6780 = VERTEX_POINT ( 'NONE', #41626 ) ; +#6779 = EDGE_CURVE ( 'NONE', #10041, #59888, #41352, .T. ) ; +#6781 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#6782 = AXIS2_PLACEMENT_3D ( 'NONE', #67850, #30605, #74122 ) ; +#6783 = AXIS2_PLACEMENT_3D ( 'NONE', #68820, #75343, #75088 ) ; +#6784 = ORIENTED_EDGE ( 'NONE', *, *, #80271, .F. ) ; +#6785 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950487600, 10.40771342879313500, -28.53891855579973600 ) ) ; +#6786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6787 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#6788 = ADVANCED_FACE ( 'NONE', ( #53982 ), #51999, .F. ) ; +#6789 = CONICAL_SURFACE ( 'NONE', #46873, 10.00000000000009600, 0.7853981633974447300 ) ; +#6790 = VERTEX_POINT ( 'NONE', #23155 ) ; +#6791 = ORIENTED_EDGE ( 'NONE', *, *, #61697, .F. ) ; +#6792 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6793 = CARTESIAN_POINT ( 'NONE', ( -11.56194429656799000, 28.61613305479827600, -28.57723854182873800 ) ) ; +#6794 = EDGE_LOOP ( 'NONE', ( #27090, #74160, #38285 ) ) ; +#6795 = EDGE_LOOP ( 'NONE', ( #36585, #55867, #72401, #55766, #59051, #46165 ) ) ; +#6796 = CIRCLE ( 'NONE', #53010, 10.50000000000009800 ) ; +#6797 = ADVANCED_FACE ( 'NONE', ( #20919 ), #18946, .F. ) ; +#6798 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 63.33333333333333600, 1.294441961969997200 ) ) ; +#6799 = ORIENTED_EDGE ( 'NONE', *, *, #2077, .T. ) ; +#6800 = ORIENTED_EDGE ( 'NONE', *, *, #42239, .T. ) ; +#6801 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 28.33333333333335000, 2.794441961969998300 ) ) ; +#6802 = AXIS2_PLACEMENT_3D ( 'NONE', #58116, #20872, #64409 ) ; +#6803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6804 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 81.65075715145309200, -28.20555803802997400 ) ) ; +#6805 = FACE_OUTER_BOUND ( 'NONE', #65189, .T. ) ; +#6807 = VERTEX_POINT ( 'NONE', #10907 ) ; +#6806 = ADVANCED_FACE ( 'NONE', ( #37419 ), #66656, .T. ) ; +#6808 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#6809 = ADVANCED_FACE ( 'NONE', ( #50047 ), #17166, .T. ) ; +#6810 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 65.66666666666668600, -10.73183747965883100 ) ) ; +#6811 = VERTEX_POINT ( 'NONE', #73197 ) ; +#6812 = CARTESIAN_POINT ( 'NONE', ( -4.512728101709796200, 51.47860083896993200, -28.56001287362840600 ) ) ; +#6813 = ORIENTED_EDGE ( 'NONE', *, *, #11645, .F. ) ; +#6814 = AXIS2_PLACEMENT_3D ( 'NONE', #24616, #5857, #55602 ) ; +#6815 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725662200, 63.66464174796072900, -28.53896444442201000 ) ) ; +#6816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6818 = ADVANCED_FACE ( 'NONE', ( #70530 ), #17011, .F. ) ; +#6817 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60002, #72509, #29292, #72776 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099546579760600E-007, 0.0008759529789575372600 ), + .UNSPECIFIED. ) ; +#6819 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 47.44142842854296300, -28.20555803802996700 ) ) ; +#6820 = EDGE_CURVE ( 'NONE', #14216, #78459, #14902, .T. ) ; +#6821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6822 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#6823 = AXIS2_PLACEMENT_3D ( 'NONE', #43726, #31272, #18999 ) ; +#6824 = FACE_OUTER_BOUND ( 'NONE', #29296, .T. ) ; +#6825 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279000, 39.35339758437808700, -28.20555803802995200 ) ) ; +#6826 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#6827 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44156, #680, #25740, #69237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001679852151197466100 ), + .UNSPECIFIED. ) ; +#6828 = EDGE_LOOP ( 'NONE', ( #14885, #68578, #13630, #49282 ) ) ; +#6829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6830 = ORIENTED_EDGE ( 'NONE', *, *, #15223, .T. ) ; +#6831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6832 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042478600, 11.09027028261003000, -28.70555803802993500 ) ) ; +#6833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43669, #37688, #56469, #19215 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674960996100E-007, 0.0003940053330073650700 ), + .UNSPECIFIED. ) ; +#6834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6836 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.22294471194861400, -28.20555803802997700 ) ) ; +#6837 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 20.24660241562182300, -28.20555803802994200 ) ) ; +#6838 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9716, #46945, #53225, #15973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336186740052500E-007, 0.0006649560044137943800 ), + .UNSPECIFIED. ) ; +#6841 = CONICAL_SURFACE ( 'NONE', #78981, 10.00000000000009200, 0.7853981633974447300 ) ; +#6842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6843 = ORIENTED_EDGE ( 'NONE', *, *, #70870, .F. ) ; +#6844 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498194900, 28.49827085154637600, -28.24094723680242000 ) ) ; +#6845 = ORIENTED_EDGE ( 'NONE', *, *, #24799, .F. ) ; +#6846 = EDGE_CURVE ( 'NONE', #19106, #27421, #414, .T. ) ; +#6847 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805688400, 43.91427200762525700, -28.67630847257078800 ) ) ; +#6848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6849 = CONICAL_SURFACE ( 'NONE', #71471, 10.50000000000009600, 0.7853981633974500600 ) ; +#6850 = EDGE_CURVE ( 'NONE', #51376, #30740, #66767, .T. ) ; +#6851 = ORIENTED_EDGE ( 'NONE', *, *, #17254, .T. ) ; +#6852 = EDGE_LOOP ( 'NONE', ( #55491, #66995, #45045 ) ) ; +#6853 = ORIENTED_EDGE ( 'NONE', *, *, #26699, .T. ) ; +#6854 = VERTEX_POINT ( 'NONE', #17701 ) ; +#6855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6857 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#6858 = EDGE_CURVE ( 'NONE', #46957, #9828, #4355, .T. ) ; +#6859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6860 = EDGE_CURVE ( 'NONE', #74697, #65179, #52254, .T. ) ; +#6862 = VERTEX_POINT ( 'NONE', #48936 ) ; +#6861 = AXIS2_PLACEMENT_3D ( 'NONE', #23068, #79100, #41803 ) ; +#6863 = CONICAL_SURFACE ( 'NONE', #68233, 10.00000000000009600, 0.7853981633974447300 ) ; +#6864 = VERTEX_POINT ( 'NONE', #11724 ) ; +#6865 = ORIENTED_EDGE ( 'NONE', *, *, #80149, .T. ) ; +#6866 = EDGE_CURVE ( 'NONE', #12914, #77911, #59878, .T. ) ; +#6867 = ORIENTED_EDGE ( 'NONE', *, *, #61487, .T. ) ; +#6868 = ORIENTED_EDGE ( 'NONE', *, *, #32016, .F. ) ; +#6869 = DIRECTION ( 'NONE', ( -1.982541115402066600E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6870 = VERTEX_POINT ( 'NONE', #5451 ) ; +#6871 = VERTEX_POINT ( 'NONE', #36713 ) ; +#6872 = CONICAL_SURFACE ( 'NONE', #28545, 10.50000000000009600, 0.7853981633974500600 ) ; +#6873 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 34.33333333333334300, -8.133761268305512700 ) ) ; +#6874 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310471800, 49.60230989102910100, -28.61774594594331600 ) ) ; +#6875 = AXIS2_PLACEMENT_3D ( 'NONE', #14992, #58509, #21267 ) ; +#6876 = ORIENTED_EDGE ( 'NONE', *, *, #67483, .F. ) ; +#6877 = EDGE_CURVE ( 'NONE', #63908, #2580, #37798, .T. ) ; +#6878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74666, #18630, #55879, #37361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192576588400 ), + .UNSPECIFIED. ) ; +#6879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#6880 = EDGE_CURVE ( 'NONE', #76937, #46914, #68603, .T. ) ; +#6881 = EDGE_CURVE ( 'NONE', #22705, #60180, #2383, .T. ) ; +#6882 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949245900, 28.07379779496241300, -28.70555803802994200 ) ) ; +#6883 = ADVANCED_FACE ( 'NONE', ( #35523 ), #79295, .F. ) ; +#6884 = AXIS2_PLACEMENT_3D ( 'NONE', #72310, #53514, #66049 ) ; +#6885 = CIRCLE ( 'NONE', #5022, 10.00000000000009200 ) ; +#6887 = ORIENTED_EDGE ( 'NONE', *, *, #33536, .F. ) ; +#6886 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 30.93250300240228900, -28.20555803802996700 ) ) ; +#6888 = ORIENTED_EDGE ( 'NONE', *, *, #37810, .T. ) ; +#6889 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310461500, 9.997690108970880700, -28.61774594594333000 ) ) ; +#6890 = EDGE_CURVE ( 'NONE', #23799, #167, #23381, .T. ) ; +#6891 = ADVANCED_FACE ( 'NONE', ( #438 ), #46157, .F. ) ; +#6892 = AXIS2_PLACEMENT_3D ( 'NONE', #38594, #56855, #26141 ) ; +#6893 = AXIS2_PLACEMENT_3D ( 'NONE', #33313, #45790, #8543 ) ; +#6894 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 30.86762008758048400, -28.26633708900882900 ) ) ; +#6895 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 5.666666666666683800, 4.294441961969993400 ) ) ; +#6896 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6897 = ADVANCED_FACE ( 'NONE', ( #15047 ), #13129, .F. ) ; +#6898 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730438300, 71.58737389638844200, -28.29936525552450600 ) ) ; +#6899 = ORIENTED_EDGE ( 'NONE', *, *, #49142, .F. ) ; +#6900 = ORIENTED_EDGE ( 'NONE', *, *, #50562, .T. ) ; +#6901 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#6902 = CARTESIAN_POINT ( 'NONE', ( 17.18645490400225400, 5.627080849527372300, -27.69877546723723300 ) ) ; +#6903 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 12.63556610137281800, -28.54207364681940000 ) ) ; +#6904 = ORIENTED_EDGE ( 'NONE', *, *, #21813, .F. ) ; +#6905 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 9.940690926013783000, -28.35186440610855700 ) ) ; +#6906 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260019600, 80.20034312068834500, -28.70555803803001600 ) ) ; +#6907 = ADVANCED_FACE ( 'NONE', ( #31614 ), #49723, .T. ) ; +#6908 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6909 = CIRCLE ( 'NONE', #9614, 10.00000000000009600 ) ; +#6910 = AXIS2_PLACEMENT_3D ( 'NONE', #63586, #26335, #69809 ) ; +#6911 = ORIENTED_EDGE ( 'NONE', *, *, #42852, .F. ) ; +#6912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6913 = ORIENTED_EDGE ( 'NONE', *, *, #37571, .T. ) ; +#6914 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 40.16666666666667900, 0.1341879241256129200 ) ) ; +#6916 = EDGE_CURVE ( 'NONE', #2326, #5753, #48112, .T. ) ; +#6915 = ORIENTED_EDGE ( 'NONE', *, *, #71462, .F. ) ; +#6917 = CIRCLE ( 'NONE', #80285, 9.500000000000099500 ) ; +#6918 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826523600, 69.95051138331400900, -28.33414295261581700 ) ) ; +#6919 = ORIENTED_EDGE ( 'NONE', *, *, #28631, .F. ) ; +#6920 = AXIS2_PLACEMENT_3D ( 'NONE', #40564, #77840, #3290 ) ; +#6921 = ORIENTED_EDGE ( 'NONE', *, *, #17613, .T. ) ; +#6922 = VERTEX_POINT ( 'NONE', #37495 ) ; +#6923 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725386900, 63.66464174796081500, -28.53896444442226300 ) ) ; +#6924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6925 = ORIENTED_EDGE ( 'NONE', *, *, #43508, .T. ) ; +#6926 = CARTESIAN_POINT ( 'NONE', ( 23.63347480791777100, 100.2334748079193100, -24.03609678917575100 ) ) ; +#6927 = ADVANCED_FACE ( 'NONE', ( #64728 ), #27720, .T. ) ; +#6928 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 70.90050506338789700, -28.70555803803030800 ) ) ; +#6929 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101300, 40.29999999999999000, -28.45034744217088700 ) ) ; +#6930 = AXIS2_PLACEMENT_3D ( 'NONE', #30735, #74270, #36955 ) ; +#6931 = FACE_OUTER_BOUND ( 'NONE', #75783, .T. ) ; +#6932 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086476100, 9.628125812756664500, -28.37194250757542600 ) ) ; +#6933 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 80.16054007504463600, -28.34042301926881500 ) ) ; +#6934 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49410, #55424, #61981, #24704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001043664170964632600 ), + .UNSPECIFIED. ) ; +#6935 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 81.65075715145309200, -28.20555803802997400 ) ) ; +#6936 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244300, 19.89456479767167400, -28.70555803802994200 ) ) ; +#6937 = FACE_OUTER_BOUND ( 'NONE', #30954, .T. ) ; +#6938 = AXIS2_PLACEMENT_3D ( 'NONE', #62431, #25166, #68681 ) ; +#6939 = ORIENTED_EDGE ( 'NONE', *, *, #27965, .T. ) ; +#6940 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 43.99926474563213200, -28.70555803802997700 ) ) ; +#6941 = VERTEX_POINT ( 'NONE', #62555 ) ; +#6942 = EDGE_LOOP ( 'NONE', ( #47047, #65188, #24310, #20920, #60049 ) ) ; +#6943 = ORIENTED_EDGE ( 'NONE', *, *, #5165, .T. ) ; +#6944 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6945 = ORIENTED_EDGE ( 'NONE', *, *, #63931, .T. ) ; +#6946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6947 = CIRCLE ( 'NONE', #66507, 10.00000000000009200 ) ; +#6948 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026183300, 35.04999999999746100, -28.70555803802995200 ) ) ; +#6949 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58901, #9393, #28215, #71704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100395095600, 0.001517194977238175300 ), + .UNSPECIFIED. ) ; +#6950 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.43250300240229200, -28.20555803802997700 ) ) ; +#6951 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462657100, 61.25732391202388500, -28.20555803803014400 ) ) ; +#6952 = CARTESIAN_POINT ( 'NONE', ( -5.216693534804150500, 60.79999999999999000, -28.32841359973437900 ) ) ; +#6953 = EDGE_CURVE ( 'NONE', #69393, #64978, #8874, .T. ) ; +#6954 = CIRCLE ( 'NONE', #1322, 10.50000000000009800 ) ; +#6955 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 46.50000000000001400, -9.258116921287651700 ) ) ; +#6956 = ORIENTED_EDGE ( 'NONE', *, *, #26212, .F. ) ; +#6957 = EDGE_CURVE ( 'NONE', #37106, #28672, #44192, .T. ) ; +#6958 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6959 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 11.66666666666668700, 3.124568980892192800 ) ) ; +#6960 = CARTESIAN_POINT ( 'NONE', ( -9.497924978448516200, 50.60145251508603800, -28.70555803802997700 ) ) ; +#6961 = EDGE_CURVE ( 'NONE', #26473, #19369, #75230, .T. ) ; +#6962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65479, #71430, #52914, #71717 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735961463400E-007, 0.0002745102201814154700 ), + .UNSPECIFIED. ) ; +#6963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6964 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941500, 90.13716795162659400, -28.48697406221667800 ) ) ; +#6965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6966 = EDGE_CURVE ( 'NONE', #68448, #77128, #60783, .T. ) ; +#6967 = EDGE_CURVE ( 'NONE', #14507, #37061, #46258, .T. ) ; +#6968 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105215700, 90.28233213024645900, -28.25051428653848600 ) ) ; +#6969 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 14.00000000000001800, -12.20555803803000200 ) ) ; +#6970 = ORIENTED_EDGE ( 'NONE', *, *, #70320, .T. ) ; +#6971 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 17.19543746431604000, -28.61277292027076100 ) ) ; +#6972 = ORIENTED_EDGE ( 'NONE', *, *, #29324, .T. ) ; +#6973 = AXIS2_PLACEMENT_3D ( 'NONE', #18724, #62252, #24978 ) ; +#6974 = EDGE_CURVE ( 'NONE', #19874, #49679, #62755, .T. ) ; +#6975 = EDGE_CURVE ( 'NONE', #35308, #21392, #33541, .T. ) ; +#6976 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112213500, 50.07332680091206400, -28.37233769390155300 ) ) ; +#6977 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146655200, 20.79130857014957100, -28.37223374938506400 ) ) ; +#6978 = EDGE_CURVE ( 'NONE', #48195, #15552, #60809, .T. ) ; +#6979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6980 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#6981 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 47.67143691309412600, -28.36981695106783300 ) ) ; +#6982 = CONICAL_SURFACE ( 'NONE', #50689, 10.00000000000009200, 0.7853981633974447300 ) ; +#6983 = ORIENTED_EDGE ( 'NONE', *, *, #24625, .F. ) ; +#6984 = ORIENTED_EDGE ( 'NONE', *, *, #51248, .F. ) ; +#6985 = AXIS2_PLACEMENT_3D ( 'NONE', #44998, #7751, #51246 ) ; +#6986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6988 = ADVANCED_FACE ( 'NONE', ( #75388 ), #73447, .F. ) ; +#6989 = CONICAL_SURFACE ( 'NONE', #34913, 10.00000000000009400, 0.7853981633974447300 ) ; +#6990 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171143700, 19.29999999999999000, -28.57107744631859300 ) ) ; +#6991 = ORIENTED_EDGE ( 'NONE', *, *, #49569, .T. ) ; +#6992 = ORIENTED_EDGE ( 'NONE', *, *, #20465, .T. ) ; +#6993 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484750700, 61.37838321498803400, -28.29547179040467200 ) ) ; +#6994 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6995 = ORIENTED_EDGE ( 'NONE', *, *, #10466, .F. ) ; +#6996 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754300, 21.59027028261003500, -28.70555803802994500 ) ) ; +#6997 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#6998 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 28.85339758437810400, -28.20555803802994200 ) ) ; +#6999 = ADVANCED_FACE ( 'NONE', ( #29686 ), #40319, .F. ) ; +#7000 = AXIS2_PLACEMENT_3D ( 'NONE', #49920, #12714, #56196 ) ; +#7001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7002 = ORIENTED_EDGE ( 'NONE', *, *, #38549, .F. ) ; +#7003 = AXIS2_PLACEMENT_3D ( 'NONE', #21022, #27281, #58254 ) ; +#7004 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158400, 34.09761904761920400, -28.70555803802995200 ) ) ; +#7005 = AXIS2_PLACEMENT_3D ( 'NONE', #53686, #59973, #47396 ) ; +#7006 = CONICAL_SURFACE ( 'NONE', #9267, 10.50000000000009800, 0.7853981633974500600 ) ; +#7007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31622, #6847, #50331, #13136 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004016400 ), + .UNSPECIFIED. ) ; +#7008 = ADVANCED_FACE ( 'NONE', ( #42264 ), #7222, .F. ) ; +#7009 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#7010 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 30.72294471194860000, -28.20555803802996700 ) ) ; +#7011 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 83.67681279774500100, -28.70555803802997700 ) ) ; +#7012 = ORIENTED_EDGE ( 'NONE', *, *, #20899, .F. ) ; +#7013 = FACE_OUTER_BOUND ( 'NONE', #80294, .T. ) ; +#7014 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 17.50000000000002500, 4.650848422521012700 ) ) ; +#7015 = ORIENTED_EDGE ( 'NONE', *, *, #11918, .F. ) ; +#7016 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034406200, 28.42298334620740300, -28.20555803802994500 ) ) ; +#7017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7018 = EDGE_LOOP ( 'NONE', ( #46241, #12115, #24445, #19260 ) ) ; +#7019 = ORIENTED_EDGE ( 'NONE', *, *, #75933, .F. ) ; +#7020 = CIRCLE ( 'NONE', #17908, 10.00000000000009200 ) ; +#7021 = ORIENTED_EDGE ( 'NONE', *, *, #24870, .F. ) ; +#7022 = FACE_OUTER_BOUND ( 'NONE', #2108, .T. ) ; +#7023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7024 = CARTESIAN_POINT ( 'NONE', ( 16.87500833473018600, 60.01262610361146000, -28.29936525552467300 ) ) ; +#7025 = AXIS2_PLACEMENT_3D ( 'NONE', #49941, #12752, #56227 ) ; +#7026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7027 = EDGE_CURVE ( 'NONE', #14948, #1022, #31857, .T. ) ; +#7028 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7029 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155602900, 55.46616414991829900, -28.37247596307090400 ) ) ; +#7030 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 30.93250300240228900, -28.20555803802996700 ) ) ; +#7031 = FACE_OUTER_BOUND ( 'NONE', #6574, .T. ) ; +#7032 = VERTEX_POINT ( 'NONE', #63646 ) ; +#7033 = EDGE_CURVE ( 'NONE', #79180, #61551, #17393, .T. ) ; +#7034 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7035 = AXIS2_PLACEMENT_3D ( 'NONE', #74156, #36847, #80395 ) ; +#7036 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7037 = CARTESIAN_POINT ( 'NONE', ( 4.502075021551530800, 50.60145251508584600, -28.70555803803014400 ) ) ; +#7038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54024, #29073, #23046, #66552 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999459161700E-007, 0.0006654947828621516100 ), + .UNSPECIFIED. ) ; +#7039 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180654400, 61.65075715145295700, -28.20555803803014100 ) ) ; +#7040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7042 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655646000, 31.17701665379238200, -28.20555803802996000 ) ) ; +#7043 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69081, #63097, #1052, #44530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674239009508600E-007, 0.0007606607323829841500 ), + .UNSPECIFIED. ) ; +#7044 = EDGE_LOOP ( 'NONE', ( #68608, #78551, #70625 ) ) ; +#7045 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458391700, 41.01125751638927100, -28.53740755999536900 ) ) ; +#7046 = VERTEX_POINT ( 'NONE', #14115 ) ; +#7047 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 61.16666666666668600, -2.545304000185620600 ) ) ; +#7048 = AXIS2_PLACEMENT_3D ( 'NONE', #50731, #75507, #44457 ) ; +#7049 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 26.16666666666667500, -3.349151577478988200 ) ) ; +#7050 = CIRCLE ( 'NONE', #46992, 9.500000000000097700 ) ; +#7051 = VERTEX_POINT ( 'NONE', #57621 ) ; +#7052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#7053 = FACE_OUTER_BOUND ( 'NONE', #46387, .T. ) ; +#7055 = EDGE_CURVE ( 'NONE', #17822, #5448, #58825, .T. ) ; +#7054 = ORIENTED_EDGE ( 'NONE', *, *, #5715, .F. ) ; +#7056 = ORIENTED_EDGE ( 'NONE', *, *, #59679, .T. ) ; +#7057 = CIRCLE ( 'NONE', #4316, 9.500000000000101300 ) ; +#7058 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 63.49999999999999300, 6.847000845227646500 ) ) ; +#7059 = ORIENTED_EDGE ( 'NONE', *, *, #30361, .T. ) ; +#7060 = ORIENTED_EDGE ( 'NONE', *, *, #12602, .T. ) ; +#7061 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543120100, 9.864774832918886500, -28.27573853395003300 ) ) ; +#7062 = CIRCLE ( 'NONE', #18110, 9.500000000000095900 ) ; +#7063 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7064 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#7065 = ADVANCED_FACE ( 'NONE', ( #23812 ), #38356, .T. ) ; +#7066 = CARTESIAN_POINT ( 'NONE', ( 9.875008334730207300, 81.58737389638852700, -28.29936525552459200 ) ) ; +#7067 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7068 = ORIENTED_EDGE ( 'NONE', *, *, #11042, .T. ) ; +#7069 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7070 = EDGE_CURVE ( 'NONE', #45369, #72149, #54928, .T. ) ; +#7071 = CIRCLE ( 'NONE', #5567, 9.500000000000097700 ) ; +#7072 = EDGE_CURVE ( 'NONE', #79303, #65361, #2903, .T. ) ; +#7073 = ORIENTED_EDGE ( 'NONE', *, *, #35956, .T. ) ; +#7074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7075 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7076 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899347200, 31.47636006919909200, -28.38670679782167400 ) ) ; +#7077 = ORIENTED_EDGE ( 'NONE', *, *, #73581, .F. ) ; +#7078 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566869200, 45.54999999999998300, -28.70555803802996700 ) ) ; +#7079 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7080 = EDGE_LOOP ( 'NONE', ( #78851, #38187, #60789 ) ) ; +#7081 = CARTESIAN_POINT ( 'NONE', ( 4.512728101709973800, 51.47860083896977600, -28.56001287362862200 ) ) ; +#7082 = FACE_OUTER_BOUND ( 'NONE', #10169, .T. ) ; +#7083 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868873500, 90.01994747561657600, -28.24986299608878000 ) ) ; +#7084 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#7085 = VERTEX_POINT ( 'NONE', #2114 ) ; +#7086 = CARTESIAN_POINT ( 'NONE', ( 15.16937532304038400, 25.90149171177413800, -28.70555803803001600 ) ) ; +#7087 = ADVANCED_FACE ( 'NONE', ( #77329 ), #69517, .T. ) ; +#7088 = CONICAL_SURFACE ( 'NONE', #17427, 10.00000000000009200, 0.7853981633974447300 ) ; +#7089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7090 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150669200, 18.27966528189952600, -28.30868034705247600 ) ) ; +#7091 = AXIS2_PLACEMENT_3D ( 'NONE', #34555, #22041, #9505 ) ; +#7092 = EDGE_CURVE ( 'NONE', #31640, #32815, #69248, .T. ) ; +#7093 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609044400, 60.13716795162677200, -28.48697406221666700 ) ) ; +#7094 = EDGE_CURVE ( 'NONE', #64580, #5676, #54764, .T. ) ; +#7095 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54021, #3986, #79073, #41770 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002139977954367756200, 0.002490143138875795600 ), + .UNSPECIFIED. ) ; +#7096 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 20.67701665379220800, -28.20555803802994500 ) ) ; +#7097 = ORIENTED_EDGE ( 'NONE', *, *, #71203, .T. ) ; +#7098 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819190700, 89.94924284854670300, -28.20555803802997700 ) ) ; +#7099 = EDGE_CURVE ( 'NONE', #66062, #7922, #40293, .T. ) ; +#7100 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857191200, 90.07141756547871100, -28.70555803803030800 ) ) ; +#7101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7102 = AXIS2_PLACEMENT_3D ( 'NONE', #64858, #27587, #71077 ) ; +#7103 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 67.00000000000000000, -9.205558038030005700 ) ) ; +#7104 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484952000, 52.31032580520978600, -28.59353418718928800 ) ) ; +#7105 = CONICAL_SURFACE ( 'NONE', #53880, 10.00000000000009400, 0.7853981633974447300 ) ; +#7106 = ORIENTED_EDGE ( 'NONE', *, *, #68001, .T. ) ; +#7107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7108 = FACE_OUTER_BOUND ( 'NONE', #53892, .T. ) ; +#7109 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919700, 14.05000000000000400, -28.65220501466659200 ) ) ; +#7110 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026330000, 24.55000000000000100, -28.70555803802994200 ) ) ; +#7111 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939070600, 13.41466791010115900, -28.53910738522694500 ) ) ; +#7112 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454055000, 79.08026449164297800, -28.70555803803030800 ) ) ; +#7113 = AXIS2_PLACEMENT_3D ( 'NONE', #79751, #42457, #5221 ) ; +#7114 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7116 = AXIS2_PLACEMENT_3D ( 'NONE', #76026, #50967, #57261 ) ; +#7117 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7118 = ADVANCED_FACE ( 'NONE', ( #5294 ), #36425, .F. ) ; +#7119 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.86203212531320300, -28.38801640354855800 ) ) ; +#7120 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.16749699759769500, -28.20555803802997700 ) ) ; +#7121 = ORIENTED_EDGE ( 'NONE', *, *, #62174, .F. ) ; +#7122 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 32.16666666666667900, 6.794441961969992500 ) ) ; +#7123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7124 = AXIS2_PLACEMENT_3D ( 'NONE', #48386, #60945, #23689 ) ; +#7125 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63016, #19212, #13520, #57024 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153200946199800E-007, 0.0003300514678516637600 ), + .UNSPECIFIED. ) ; +#7126 = EDGE_CURVE ( 'NONE', #48058, #7843, #25873, .T. ) ; +#7127 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .T. ) ; +#7128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7129 = EDGE_LOOP ( 'NONE', ( #57305, #20838, #62379 ) ) ; +#7130 = CIRCLE ( 'NONE', #47463, 10.50000000000009600 ) ; +#7131 = ORIENTED_EDGE ( 'NONE', *, *, #11272, .F. ) ; +#7132 = CONICAL_SURFACE ( 'NONE', #65455, 10.00000000000009400, 0.7853981633974447300 ) ; +#7133 = ORIENTED_EDGE ( 'NONE', *, *, #62330, .F. ) ; +#7134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7135 = FACE_OUTER_BOUND ( 'NONE', #58095, .T. ) ; +#7136 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2680, #27487, #8930, #52449 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.501853776554200900E-017, 0.001492013864175166500 ), + .UNSPECIFIED. ) ; +#7137 = AXIS2_PLACEMENT_3D ( 'NONE', #60601, #23315, #66846 ) ; +#7138 = EDGE_LOOP ( 'NONE', ( #24129, #43369, #43312, #4110 ) ) ; +#7139 = CARTESIAN_POINT ( 'NONE', ( 8.272691540716733600, 65.79999999999999700, -28.53979898350160500 ) ) ; +#7140 = ORIENTED_EDGE ( 'NONE', *, *, #53913, .F. ) ; +#7141 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001800, 30.56914835874665200, -28.45573375118225500 ) ) ; +#7142 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#7143 = CARTESIAN_POINT ( 'NONE', ( 4.561944296567999000, 39.11613305479827600, -28.57723854182874500 ) ) ; +#7144 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 3.500000000000007100, -9.258116921287651700 ) ) ; +#7145 = FACE_OUTER_BOUND ( 'NONE', #18377, .T. ) ; +#7146 = EDGE_LOOP ( 'NONE', ( #7344, #4422, #9193, #58134 ) ) ; +#7147 = AXIS2_PLACEMENT_3D ( 'NONE', #42985, #5737, #49225 ) ; +#7148 = FACE_OUTER_BOUND ( 'NONE', #13742, .T. ) ; +#7149 = VERTEX_POINT ( 'NONE', #39932 ) ; +#7150 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180860400, 81.65075715145344800, -28.20555803803030800 ) ) ; +#7151 = EDGE_LOOP ( 'NONE', ( #7582, #50140, #21794, #5171 ) ) ; +#7152 = ORIENTED_EDGE ( 'NONE', *, *, #27933, .F. ) ; +#7153 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#7154 = CARTESIAN_POINT ( 'NONE', ( 18.67123804807454200, 2.657502821803024800, -25.49452375641485300 ) ) ; +#7155 = EDGE_LOOP ( 'NONE', ( #46339, #1307, #66195, #64192, #68850, #61065 ) ) ; +#7156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7157 = FACE_OUTER_BOUND ( 'NONE', #79795, .T. ) ; +#7158 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 9.940690926013795400, -28.35186440610855000 ) ) ; +#7159 = AXIS2_PLACEMENT_3D ( 'NONE', #24262, #67784, #30541 ) ; +#7160 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615344500, 90.79999999999950000, -28.55171188418401200 ) ) ; +#7161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24435, #61708, #36917, #80455 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178136761900, 0.0006016798664341615400 ), + .UNSPECIFIED. ) ; +#7162 = ADVANCED_FACE ( 'NONE', ( #9167 ), #3325, .F. ) ; +#7163 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7164 = EDGE_LOOP ( 'NONE', ( #62882, #33612, #21875 ) ) ; +#7165 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#7166 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7167 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 38.00000000000000700, -1.205558038030002800 ) ) ; +#7168 = ORIENTED_EDGE ( 'NONE', *, *, #57370, .F. ) ; +#7169 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#7170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7171 = ORIENTED_EDGE ( 'NONE', *, *, #48770, .F. ) ; +#7172 = CONICAL_SURFACE ( 'NONE', #46060, 10.50000000000009600, 0.7853981633974518300 ) ; +#7173 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7174 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.16749699759737200, -28.20555803803025800 ) ) ; +#7175 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 30.72294471194860000, -28.20555803802996700 ) ) ; +#7176 = CARTESIAN_POINT ( 'NONE', ( 18.69760650585105600, 98.99521301170162200, -25.46093279988793500 ) ) ; +#7177 = ADVANCED_FACE ( 'NONE', ( #21845 ), #50989, .T. ) ; +#7178 = CARTESIAN_POINT ( 'NONE', ( -16.42208926844542200, 28.61339344823293000, -28.58282679407403700 ) ) ; +#7179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7180 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#7181 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.23796787468679200, -28.38801640354855100 ) ) ; +#7182 = PLANE ( 'NONE', #40746 ) ; +#7183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5143, #42385, #17676, #79428 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007675026475730897500 ), + .UNSPECIFIED. ) ; +#7184 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7185 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#7186 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 80.16054007504462200, -28.34042301926884400 ) ) ; +#7187 = FACE_OUTER_BOUND ( 'NONE', #63494, .T. ) ; +#7188 = ADVANCED_FACE ( 'NONE', ( #19906 ), #77462, .T. ) ; +#7189 = EDGE_CURVE ( 'NONE', #79302, #17663, #52964, .T. ) ; +#7190 = CARTESIAN_POINT ( 'NONE', ( 17.40875264640682100, 49.92052012210348300, -28.41157636893868200 ) ) ; +#7191 = ORIENTED_EDGE ( 'NONE', *, *, #12624, .F. ) ; +#7192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7193 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7194 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7196 = ORIENTED_EDGE ( 'NONE', *, *, #40792, .F. ) ; +#7195 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 26.67143691309408700, -28.36981695106777200 ) ) ; +#7197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7198 = ADVANCED_FACE ( 'NONE', ( #67583 ), #65648, .F. ) ; +#7199 = EDGE_CURVE ( 'NONE', #74886, #79395, #11416, .T. ) ; +#7200 = FACE_OUTER_BOUND ( 'NONE', #41251, .T. ) ; +#7201 = ORIENTED_EDGE ( 'NONE', *, *, #30035, .F. ) ; +#7202 = AXIS2_PLACEMENT_3D ( 'NONE', #51587, #14374, #57889 ) ; +#7203 = CIRCLE ( 'NONE', #1766, 10.00000000000009600 ) ; +#7204 = ORIENTED_EDGE ( 'NONE', *, *, #72523, .T. ) ; +#7205 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 44.33333333333334300, 4.294441961970000500 ) ) ; +#7206 = ORIENTED_EDGE ( 'NONE', *, *, #36281, .T. ) ; +#7207 = FACE_OUTER_BOUND ( 'NONE', #3874, .T. ) ; +#7208 = CONICAL_SURFACE ( 'NONE', #22620, 10.50000000000009600, 0.7853981633974500600 ) ; +#7209 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10648, #47866, #23157, #66674 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849209400, 0.007919184322923034800 ), + .UNSPECIFIED. ) ; +#7210 = ORIENTED_EDGE ( 'NONE', *, *, #38824, .F. ) ; +#7211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7212 = ORIENTED_EDGE ( 'NONE', *, *, #10585, .F. ) ; +#7213 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .F. ) ; +#7214 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 9.500000000000003600, -4.865812075874393000 ) ) ; +#7215 = AXIS2_PLACEMENT_3D ( 'NONE', #49782, #12577, #56067 ) ; +#7216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7217 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552400, 81.49769010897078700, -28.61774594594320900 ) ) ; +#7218 = EDGE_CURVE ( 'NONE', #30431, #55770, #25767, .T. ) ; +#7219 = EDGE_CURVE ( 'NONE', #5658, #7944, #77704, .T. ) ; +#7220 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.44142842854297000, -28.20555803802996700 ) ) ; +#7222 = CONICAL_SURFACE ( 'NONE', #63866, 10.50000000000009200, 0.7853981633974482800 ) ; +#7221 = AXIS2_PLACEMENT_3D ( 'NONE', #61177, #23911, #67408 ) ; +#7223 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195751800, 17.00972971738994800, -28.70555803802993100 ) ) ; +#7224 = ORIENTED_EDGE ( 'NONE', *, *, #37942, .T. ) ; +#7225 = CIRCLE ( 'NONE', #14862, 10.00000000000009200 ) ; +#7226 = EDGE_LOOP ( 'NONE', ( #65031, #43965, #28616, #53425, #51363 ) ) ; +#7227 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999568800, 51.96823913367204300, -28.70555803803014400 ) ) ; +#7228 = ORIENTED_EDGE ( 'NONE', *, *, #60133, .F. ) ; +#7229 = ORIENTED_EDGE ( 'NONE', *, *, #38166, .F. ) ; +#7230 = VERTEX_POINT ( 'NONE', #59235 ) ; +#7231 = AXIS2_PLACEMENT_3D ( 'NONE', #58951, #21722, #65257 ) ; +#7232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7233 = ORIENTED_EDGE ( 'NONE', *, *, #49001, .F. ) ; +#7234 = EDGE_CURVE ( 'NONE', #78730, #20897, #17947, .T. ) ; +#7235 = LINE ( 'NONE', #49302, #73460 ) ; +#7236 = AXIS2_PLACEMENT_3D ( 'NONE', #40682, #3422, #46920 ) ; +#7237 = AXIS2_PLACEMENT_3D ( 'NONE', #5024, #48781, #5297 ) ; +#7238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7241 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#7242 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279000, 39.35339758437808700, -28.20555803802995200 ) ) ; +#7243 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224811100, 70.09037803491492000, -28.29483400905887800 ) ) ; +#7244 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 80.16054007504433800, -28.34042301926905700 ) ) ; +#7245 = VERTEX_POINT ( 'NONE', #78004 ) ; +#7246 = CARTESIAN_POINT ( 'NONE', ( 15.27996376128088800, 92.15992752256175900, -28.70555803803002300 ) ) ; +#7247 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 71.46283204837325800, -28.48697406221693700 ) ) ; +#7248 = ORIENTED_EDGE ( 'NONE', *, *, #33667, .F. ) ; +#7249 = CONICAL_SURFACE ( 'NONE', #67427, 10.50000000000009600, 0.7853981633974500600 ) ; +#7250 = AXIS2_PLACEMENT_3D ( 'NONE', #16657, #28948, #53903 ) ; +#7251 = CARTESIAN_POINT ( 'NONE', ( -19.20651051148964700, 1.586230674801006200, -24.11929185372234500 ) ) ; +#7252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7253 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#7254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7255 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7256 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 61.43650294695079600, -28.30782889147504700 ) ) ; +#7257 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23140, #66651, #72911, #35648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850278700, 0.0007596411030281099400 ), + .UNSPECIFIED. ) ; +#7258 = ADVANCED_FACE ( 'NONE', ( #1373 ), #80225, .T. ) ; +#7259 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#7260 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662741275400, 67.93535825203905200, -28.53896444442201000 ) ) ; +#7261 = AXIS2_PLACEMENT_3D ( 'NONE', #69805, #32549, #76052 ) ; +#7262 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#7263 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 15.33333333333333700, -8.133761268305512700 ) ) ; +#7264 = FACE_OUTER_BOUND ( 'NONE', #2706, .T. ) ; +#7265 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 80.69966441803887800, -28.70555803803014400 ) ) ; +#7266 = VERTEX_POINT ( 'NONE', #78290 ) ; +#7267 = CIRCLE ( 'NONE', #65113, 10.00000000000009600 ) ; +#7268 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 70.37705528805044300, -28.20555803803047800 ) ) ; +#7269 = ADVANCED_FACE ( 'NONE', ( #56888 ), #47094, .F. ) ; +#7270 = AXIS2_PLACEMENT_3D ( 'NONE', #52762, #15516, #59023 ) ; +#7271 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344327800, 20.67701665379242500, -28.20555803802994200 ) ) ; +#7272 = CARTESIAN_POINT ( 'NONE', ( -2.997978530266222700, 39.28907435382947700, -28.25433648786265600 ) ) ; +#7273 = ORIENTED_EDGE ( 'NONE', *, *, #8029, .F. ) ; +#7274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7275 = VERTEX_POINT ( 'NONE', #16270 ) ; +#7276 = EDGE_CURVE ( 'NONE', #27806, #4804, #63287, .T. ) ; +#7277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7278 = CONICAL_SURFACE ( 'NONE', #31797, 10.50000000000009600, 0.7853981633974500600 ) ; +#7279 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 59.81066373133501200, -28.53923937255172700 ) ) ; +#7280 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 80.79999999999998300, -28.55171188418376700 ) ) ; +#7281 = CIRCLE ( 'NONE', #10623, 10.00000000000009200 ) ; +#7282 = AXIS2_PLACEMENT_3D ( 'NONE', #34646, #3602, #47107 ) ; +#7283 = ORIENTED_EDGE ( 'NONE', *, *, #26675, .T. ) ; +#7284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7285 = ADVANCED_FACE ( 'NONE', ( #32531 ), #14046, .F. ) ; +#7286 = CIRCLE ( 'NONE', #61539, 10.50000000000009200 ) ; +#7287 = VERTEX_POINT ( 'NONE', #4006 ) ; +#7288 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819203500, 71.65075715145309200, -28.20555803802997700 ) ) ; +#7289 = ORIENTED_EDGE ( 'NONE', *, *, #47228, .T. ) ; +#7290 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#7291 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#7292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#7293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7294 = ADVANCED_FACE ( 'NONE', ( #49042 ), #61753, .F. ) ; +#7295 = FACE_OUTER_BOUND ( 'NONE', #42660, .T. ) ; +#7296 = ORIENTED_EDGE ( 'NONE', *, *, #58884, .F. ) ; +#7297 = CONICAL_SURFACE ( 'NONE', #2811, 10.50000000000009200, 0.7853981633974482800 ) ; +#7298 = EDGE_CURVE ( 'NONE', #28171, #48736, #48758, .T. ) ; +#7299 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 79.28967419478900100, -28.59353418718932400 ) ) ; +#7300 = ORIENTED_EDGE ( 'NONE', *, *, #49138, .T. ) ; +#7301 = VERTEX_POINT ( 'NONE', #41537 ) ; +#7302 = EDGE_CURVE ( 'NONE', #68875, #39864, #71488, .T. ) ; +#7303 = ORIENTED_EDGE ( 'NONE', *, *, #22544, .F. ) ; +#7305 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75957, #32443, #69704, #38666 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217707473733300E-007, 0.0008482615949368431700 ), + .UNSPECIFIED. ) ; +#7304 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466641400, 9.268939712914631800, -28.57333386111658400 ) ) ; +#7306 = ORIENTED_EDGE ( 'NONE', *, *, #35610, .T. ) ; +#7307 = ADVANCED_FACE ( 'NONE', ( #34504 ), #12094, .T. ) ; +#7308 = FACE_OUTER_BOUND ( 'NONE', #65320, .T. ) ; +#7309 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 59.00000000000000700, -1.205558038030002800 ) ) ; +#7310 = ORIENTED_EDGE ( 'NONE', *, *, #26996, .T. ) ; +#7311 = ORIENTED_EDGE ( 'NONE', *, *, #21707, .T. ) ; +#7312 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150446300, 9.820334718100546900, -28.30868034705251500 ) ) ; +#7313 = EDGE_CURVE ( 'NONE', #49270, #52802, #45126, .T. ) ; +#7314 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252818300, 39.13131911501876200, -28.51286550264508100 ) ) ; +#7315 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 24.00000000000000700, -1.205558038030005300 ) ) ; +#7316 = EDGE_CURVE ( 'NONE', #19510, #20694, #34340, .T. ) ; +#7317 = ORIENTED_EDGE ( 'NONE', *, *, #18950, .F. ) ; +#7318 = CONICAL_SURFACE ( 'NONE', #63388, 10.50000000000009600, 0.7853981633974518300 ) ; +#7319 = AXIS2_PLACEMENT_3D ( 'NONE', #8732, #52242, #15015 ) ; +#7320 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956800, 71.96823913367188700, -28.70555803803030800 ) ) ; +#7321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7322 = ORIENTED_EDGE ( 'NONE', *, *, #15444, .T. ) ; +#7323 = CARTESIAN_POINT ( 'NONE', ( 4.427738916792316500, 8.799999999999668500, -28.63329695482266100 ) ) ; +#7324 = CIRCLE ( 'NONE', #55370, 10.00000000000009200 ) ; +#7325 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 61.33333333333334300, -6.705558038030005700 ) ) ; +#7326 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408273400, 80.38586625357845600, -28.27331438134757100 ) ) ; +#7327 = AXIS2_PLACEMENT_3D ( 'NONE', #66723, #29496, #72979 ) ; +#7328 = EDGE_CURVE ( 'NONE', #9068, #2092, #19875, .T. ) ; +#7329 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#7330 = EDGE_CURVE ( 'NONE', #67971, #25204, #78295, .T. ) ; +#7331 = EDGE_CURVE ( 'NONE', #106, #26683, #5417, .T. ) ; +#7332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7333 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7334 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 32.47376207875060300, -28.70555803802996700 ) ) ; +#7335 = AXIS2_PLACEMENT_3D ( 'NONE', #56365, #19111, #62640 ) ; +#7336 = VECTOR ( 'NONE', #21524, 1000.000000000000000 ) ; +#7337 = CARTESIAN_POINT ( 'NONE', ( -16.93414660040040000, 43.14286054144889000, -28.51850601323091200 ) ) ; +#7338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7339 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528429300, 18.13131911501857700, -28.51286550264478600 ) ) ; +#7340 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 10.12753447840916400, -28.38801640354880000 ) ) ; +#7341 = CARTESIAN_POINT ( 'NONE', ( 2.813460021729300200, 6.877501000800539700, -28.20555803802993100 ) ) ; +#7342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7343 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686900, 20.67701665379241400, -28.20555803802994200 ) ) ; +#7344 = ORIENTED_EDGE ( 'NONE', *, *, #61228, .T. ) ; +#7345 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.43250300240228500, -28.20555803802997700 ) ) ; +#7346 = EDGE_CURVE ( 'NONE', #4061, #79978, #28686, .T. ) ; +#7348 = ORIENTED_EDGE ( 'NONE', *, *, #21803, .F. ) ; +#7347 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465423500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#7349 = CONICAL_SURFACE ( 'NONE', #28075, 10.00000000000009400, 0.7853981633974447300 ) ; +#7350 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372569300, 47.43535825203925100, -28.53896444442198500 ) ) ; +#7351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7352 = AXIS2_PLACEMENT_3D ( 'NONE', #9767, #71787, #68503 ) ; +#7353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7354 = ORIENTED_EDGE ( 'NONE', *, *, #32537, .F. ) ; +#7355 = CARTESIAN_POINT ( 'NONE', ( 17.03244381443358800, 78.39936314726097100, -28.49841021997939800 ) ) ; +#7356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7357 = FACE_OUTER_BOUND ( 'NONE', #30233, .T. ) ; +#7358 = CONICAL_SURFACE ( 'NONE', #37623, 10.50000000000009600, 0.7853981633974518300 ) ; +#7359 = EDGE_LOOP ( 'NONE', ( #63302, #67331, #14314, #64647 ) ) ; +#7360 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 64.83333333333335700, 6.794441961969992500 ) ) ; +#7361 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042459000, 48.50972971738993800, -28.70555803802997400 ) ) ; +#7362 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 50.19949493661175700, -28.70555803802996700 ) ) ; +#7363 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11228, #48442, #23742, #67241 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695386938064000E-007, 0.0007987676590765244000 ), + .UNSPECIFIED. ) ; +#7364 = CIRCLE ( 'NONE', #28683, 10.50000000000009600 ) ; +#7365 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#7366 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#7367 = VERTEX_POINT ( 'NONE', #29887 ) ; +#7368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20375, #51323, #32864, #76383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.699674944388147800E-017, 0.001179148174662940000 ), + .UNSPECIFIED. ) ; +#7369 = ORIENTED_EDGE ( 'NONE', *, *, #49189, .T. ) ; +#7370 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7371 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#7372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7373 = AXIS2_PLACEMENT_3D ( 'NONE', #49880, #62444, #25171 ) ; +#7374 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#7375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7376 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857194100, 33.17681279774499400, -28.70555803802996700 ) ) ; +#7377 = CONICAL_SURFACE ( 'NONE', #68620, 10.50000000000009600, 0.7853981633974518300 ) ; +#7378 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41326, #78625, #47549, #10332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646386200, 0.0009605145132142484300 ), + .UNSPECIFIED. ) ; +#7379 = FACE_OUTER_BOUND ( 'NONE', #4556, .T. ) ; +#7380 = AXIS2_PLACEMENT_3D ( 'NONE', #11694, #55176, #17931 ) ; +#7381 = ORIENTED_EDGE ( 'NONE', *, *, #27510, .T. ) ; +#7382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7383 = ORIENTED_EDGE ( 'NONE', *, *, #79194, .T. ) ; +#7384 = ADVANCED_FACE ( 'NONE', ( #15997 ), #10144, .T. ) ; +#7385 = EDGE_CURVE ( 'NONE', #14525, #42984, #71749, .T. ) ; +#7386 = ORIENTED_EDGE ( 'NONE', *, *, #55927, .F. ) ; +#7387 = ORIENTED_EDGE ( 'NONE', *, *, #57996, .T. ) ; +#7388 = ORIENTED_EDGE ( 'NONE', *, *, #49259, .F. ) ; +#7389 = AXIS2_PLACEMENT_3D ( 'NONE', #56755, #25505, #63030 ) ; +#7390 = ORIENTED_EDGE ( 'NONE', *, *, #7189, .T. ) ; +#7391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7392 = ADVANCED_FACE ( 'NONE', ( #76303 ), #57824, .F. ) ; +#7393 = CIRCLE ( 'NONE', #20376, 10.50000000000009200 ) ; +#7394 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 30.00000000000001100, -9.205558038030005700 ) ) ; +#7395 = CIRCLE ( 'NONE', #56228, 9.500000000000101300 ) ; +#7396 = AXIS2_PLACEMENT_3D ( 'NONE', #3057, #46559, #9317 ) ; +#7397 = ORIENTED_EDGE ( 'NONE', *, *, #53716, .F. ) ; +#7398 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73820, #30337, #5549, #49017 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584300100, 0.0005865296644889178000 ), + .UNSPECIFIED. ) ; +#7399 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701879500, 75.79999999999999700, -28.70555803802997700 ) ) ; +#7400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7401 = ADVANCED_FACE ( 'NONE', ( #43212 ), #24730, .F. ) ; +#7402 = ORIENTED_EDGE ( 'NONE', *, *, #44704, .F. ) ; +#7403 = FACE_OUTER_BOUND ( 'NONE', #44272, .T. ) ; +#7404 = AXIS2_PLACEMENT_3D ( 'NONE', #2985, #46473, #9230 ) ; +#7405 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7406 = ORIENTED_EDGE ( 'NONE', *, *, #51038, .F. ) ; +#7407 = CIRCLE ( 'NONE', #12626, 10.50000000000009900 ) ; +#7408 = CARTESIAN_POINT ( 'NONE', ( 17.14620600645632500, 72.51871030405746400, -28.47270666107741000 ) ) ; +#7409 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56466, #50189, #6700, #62752 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200783655100, 0.0008866563355341126400 ), + .UNSPECIFIED. ) ; +#7410 = EDGE_LOOP ( 'NONE', ( #66484, #26121, #30683 ) ) ; +#7411 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7412 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 1.333333333333345900, 8.320721403598817300 ) ) ; +#7413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7414 = EDGE_CURVE ( 'NONE', #6864, #19038, #63704, .T. ) ; +#7415 = CIRCLE ( 'NONE', #38577, 10.50000000000009600 ) ; +#7416 = EDGE_LOOP ( 'NONE', ( #53205, #25301, #50681 ) ) ; +#7417 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#7418 = EDGE_CURVE ( 'NONE', #28771, #19644, #26708, .T. ) ; +#7419 = CONICAL_SURFACE ( 'NONE', #79577, 10.00000000000009200, 0.7853981633974447300 ) ; +#7420 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349245900, 30.39456479767167000, -28.70555803802995200 ) ) ; +#7421 = CARTESIAN_POINT ( 'NONE', ( 19.67703559863910500, 0.6459284038339659900, -22.24206752788212800 ) ) ; +#7422 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#7423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7424 = ORIENTED_EDGE ( 'NONE', *, *, #70240, .T. ) ; +#7425 = CONICAL_SURFACE ( 'NONE', #16014, 10.00000000000009400, 0.7853981633974447300 ) ; +#7426 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527458500, 14.36071428647280100, -28.36868303842829100 ) ) ; +#7427 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252843200, 18.13131911501858100, -28.51286550264478600 ) ) ; +#7428 = EDGE_CURVE ( 'NONE', #19608, #60180, #41266, .T. ) ; +#7429 = ORIENTED_EDGE ( 'NONE', *, *, #22352, .T. ) ; +#7430 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.66749699759768400, -28.20555803802994200 ) ) ; +#7431 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#7432 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428050700, 51.52858243452100600, -28.70555803803030800 ) ) ; +#7433 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7434 = FACE_OUTER_BOUND ( 'NONE', #13031, .T. ) ; +#7435 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#7436 = FACE_OUTER_BOUND ( 'NONE', #38414, .T. ) ; +#7437 = EDGE_CURVE ( 'NONE', #20990, #36192, #57264, .T. ) ; +#7438 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 35.83333333333334300, -2.545304000185615800 ) ) ; +#7439 = ORIENTED_EDGE ( 'NONE', *, *, #37441, .F. ) ; +#7440 = EDGE_CURVE ( 'NONE', #45954, #43972, #59797, .T. ) ; +#7441 = CARTESIAN_POINT ( 'NONE', ( 12.21669353480380400, 60.79999999999999000, -28.32841359973444300 ) ) ; +#7442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7444 = ORIENTED_EDGE ( 'NONE', *, *, #55604, .F. ) ; +#7445 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432854400, 39.35339758437810100, -28.20555803802995200 ) ) ; +#7446 = CARTESIAN_POINT ( 'NONE', ( -5.727308459283268100, 55.79999999999999700, -28.53979898350160500 ) ) ; +#7447 = CARTESIAN_POINT ( 'NONE', ( 18.14259659907301600, 93.17129829954231500, -28.26701575348105800 ) ) ; +#7448 = ORIENTED_EDGE ( 'NONE', *, *, #42824, .F. ) ; +#7449 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988900, 69.63176086632779500, -28.70555803803014400 ) ) ; +#7450 = AXIS2_PLACEMENT_3D ( 'NONE', #28431, #34652, #65673 ) ; +#7451 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7452 = EDGE_CURVE ( 'NONE', #36682, #44984, #42787, .T. ) ; +#7453 = CARTESIAN_POINT ( 'NONE', ( 4.348555835138253800, 8.144909198926003000, -28.55411387316860000 ) ) ; +#7454 = EDGE_CURVE ( 'NONE', #61123, #20135, #28401, .T. ) ; +#7455 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7456 = EDGE_CURVE ( 'NONE', #53233, #45119, #13893, .T. ) ; +#7457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7459 = LINE ( 'NONE', #48467, #73677 ) ; +#7460 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 30.93250300240229200, -28.23966044827354000 ) ) ; +#7461 = CARTESIAN_POINT ( 'NONE', ( 16.19858693502893100, 94.72249899919880500, -28.20555803803014400 ) ) ; +#7462 = ORIENTED_EDGE ( 'NONE', *, *, #42558, .F. ) ; +#7463 = AXIS2_PLACEMENT_3D ( 'NONE', #62989, #25739, #69233 ) ; +#7464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7465 = ORIENTED_EDGE ( 'NONE', *, *, #31189, .F. ) ; +#7466 = ORIENTED_EDGE ( 'NONE', *, *, #48068, .F. ) ; +#7467 = ORIENTED_EDGE ( 'NONE', *, *, #35612, .F. ) ; +#7468 = PLANE ( 'NONE', #8268 ) ; +#7469 = ORIENTED_EDGE ( 'NONE', *, *, #10830, .T. ) ; +#7470 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 22.65857157145701000, -28.20555803802995200 ) ) ; +#7471 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145294300, 71.86801718796586200, -28.34169759783691900 ) ) ; +#7472 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7473 = FACE_OUTER_BOUND ( 'NONE', #31750, .T. ) ; +#7474 = AXIS2_PLACEMENT_3D ( 'NONE', #53356, #16106, #59637 ) ; +#7475 = AXIS2_PLACEMENT_3D ( 'NONE', #61125, #11347, #79882 ) ; +#7476 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 61.25732391202397800, -28.20555803802997700 ) ) ; +#7477 = ORIENTED_EDGE ( 'NONE', *, *, #39381, .T. ) ; +#7478 = AXIS2_PLACEMENT_3D ( 'NONE', #6516, #49998, #12796 ) ; +#7479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7480 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153686800, 60.79999999999998300, -28.55171188418376400 ) ) ; +#7482 = VERTEX_POINT ( 'NONE', #24928 ) ; +#7481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1245, #57289, #76043, #38747 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318541938200, 0.001296017758336668600 ), + .UNSPECIFIED. ) ; +#7483 = FACE_OUTER_BOUND ( 'NONE', #58282, .T. ) ; +#7484 = ORIENTED_EDGE ( 'NONE', *, *, #26444, .F. ) ; +#7485 = CIRCLE ( 'NONE', #38091, 10.00000000000009200 ) ; +#7486 = FACE_OUTER_BOUND ( 'NONE', #36662, .T. ) ; +#7487 = ADVANCED_FACE ( 'NONE', ( #74389 ), #6235, .F. ) ; +#7488 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 7.333333333333350800, 1.294441961969997200 ) ) ; +#7489 = AXIS2_PLACEMENT_3D ( 'NONE', #4419, #47912, #10690 ) ; +#7490 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32334, #75832, #1305, #44782 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211424400, 0.001517199873936579900 ), + .UNSPECIFIED. ) ; +#7491 = ORIENTED_EDGE ( 'NONE', *, *, #57994, .T. ) ; +#7492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7493 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540436700, 69.08026449164336200, -28.70555803802997400 ) ) ; +#7494 = CONICAL_SURFACE ( 'NONE', #78190, 10.00000000000009600, 0.7853981633974447300 ) ; +#7495 = ORIENTED_EDGE ( 'NONE', *, *, #30465, .F. ) ; +#7496 = CARTESIAN_POINT ( 'NONE', ( -2.042760264136621400, 55.80000000000008200, -28.53819074160791300 ) ) ; +#7497 = EDGE_CURVE ( 'NONE', #59476, #38457, #39304, .T. ) ; +#7498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18707, #74737, #12744, #56221 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351216500500E-007, 0.0003902800319293326200 ), + .UNSPECIFIED. ) ; +#7499 = AXIS2_PLACEMENT_3D ( 'NONE', #15533, #21796, #77538 ) ; +#7500 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195753600, 38.00972971738994500, -28.70555803802996000 ) ) ; +#7501 = ORIENTED_EDGE ( 'NONE', *, *, #72929, .T. ) ; +#7502 = ORIENTED_EDGE ( 'NONE', *, *, #19873, .F. ) ; +#7503 = CONICAL_SURFACE ( 'NONE', #80587, 10.50000000000009600, 0.7853981633974500600 ) ; +#7504 = ORIENTED_EDGE ( 'NONE', *, *, #38919, .F. ) ; +#7505 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7506 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263253600, 24.54999999999995500, -28.70555803802994200 ) ) ; +#7507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21405, #15129, #52357, #27668 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611718725528400E-007, 0.0002592600401777301600 ), + .UNSPECIFIED. ) ; +#7508 = PLANE ( 'NONE', #14849 ) ; +#7509 = ADVANCED_FACE ( 'NONE', ( #55855 ), #37336, .T. ) ; +#7510 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807153100, 66.79999999999998300, -28.70555803802997700 ) ) ; +#7511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7512 = AXIS2_PLACEMENT_3D ( 'NONE', #53994, #16741, #60288 ) ; +#7513 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747182600, 39.13131911501876200, -28.51286550264508800 ) ) ; +#7514 = CIRCLE ( 'NONE', #29219, 10.00000000000009200 ) ; +#7515 = EDGE_LOOP ( 'NONE', ( #71833, #38520, #49093 ) ) ; +#7516 = CARTESIAN_POINT ( 'NONE', ( -17.78912799003676100, 4.420682396527768200, -27.01096643450252400 ) ) ; +#7517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7519 = VERTEX_POINT ( 'NONE', #62463 ) ; +#7520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7521 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644324400E-015, 40.30000000000008200, -28.70555803802995200 ) ) ; +#7522 = AXIS2_PLACEMENT_3D ( 'NONE', #78411, #3843, #59642 ) ; +#7523 = CIRCLE ( 'NONE', #11448, 10.00000000000009200 ) ; +#7524 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#7525 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7526 = CIRCLE ( 'NONE', #15726, 10.00000000000009200 ) ; +#7527 = ORIENTED_EDGE ( 'NONE', *, *, #42409, .F. ) ; +#7528 = ORIENTED_EDGE ( 'NONE', *, *, #9617, .T. ) ; +#7529 = EDGE_CURVE ( 'NONE', #66170, #46133, #70452, .T. ) ; +#7530 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 13.16666666666667700, 6.794441961969992500 ) ) ; +#7531 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7532 = ORIENTED_EDGE ( 'NONE', *, *, #21225, .F. ) ; +#7533 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7534 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#7535 = ORIENTED_EDGE ( 'NONE', *, *, #73829, .F. ) ; +#7536 = ORIENTED_EDGE ( 'NONE', *, *, #40099, .T. ) ; +#7537 = EDGE_LOOP ( 'NONE', ( #69962, #64846, #3020 ) ) ; +#7538 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 9.932503002402292200, -28.20555803802994200 ) ) ; +#7539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7540 = VERTEX_POINT ( 'NONE', #31466 ) ; +#7541 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 63.67681279774509300, -28.70555803803030800 ) ) ; +#7542 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36471, #29739, #5490, #48961 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560429400, 0.003631405919786736200 ), + .UNSPECIFIED. ) ; +#7543 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7544 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#7545 = CONICAL_SURFACE ( 'NONE', #42829, 10.50000000000009600, 0.7853981633974518300 ) ; +#7546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7547 = EDGE_CURVE ( 'NONE', #32445, #9262, #80202, .T. ) ; +#7548 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7550 = EDGE_CURVE ( 'NONE', #52871, #28184, #65763, .T. ) ; +#7549 = ORIENTED_EDGE ( 'NONE', *, *, #28983, .T. ) ; +#7551 = EDGE_LOOP ( 'NONE', ( #35920, #14675, #44314 ) ) ; +#7552 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 70.34267608797603100, -28.20555803802997700 ) ) ; +#7553 = CARTESIAN_POINT ( 'NONE', ( 11.11893552610904100, 90.49763722318471100, -28.32100408376108500 ) ) ; +#7554 = FACE_OUTER_BOUND ( 'NONE', #43883, .T. ) ; +#7555 = CARTESIAN_POINT ( 'NONE', ( -4.002028721724252900, 41.31091476818474500, -28.25432823872347000 ) ) ; +#7556 = AXIS2_PLACEMENT_3D ( 'NONE', #95, #49840, #12630 ) ; +#7557 = EDGE_CURVE ( 'NONE', #72521, #36509, #51229, .T. ) ; +#7558 = EDGE_CURVE ( 'NONE', #63443, #55084, #36798, .T. ) ; +#7559 = EDGE_CURVE ( 'NONE', #34889, #79234, #22792, .T. ) ; +#7560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7561 = ORIENTED_EDGE ( 'NONE', *, *, #47224, .F. ) ; +#7562 = ADVANCED_FACE ( 'NONE', ( #72446 ), #51927, .T. ) ; +#7563 = EDGE_CURVE ( 'NONE', #31985, #5301, #22356, .T. ) ; +#7564 = AXIS2_PLACEMENT_3D ( 'NONE', #74503, #37205, #80744 ) ; +#7565 = CARTESIAN_POINT ( 'NONE', ( -17.23541771751020200, 9.338306523977564700, -28.45251232912189100 ) ) ; +#7566 = FACE_OUTER_BOUND ( 'NONE', #33756, .T. ) ; +#7568 = EDGE_LOOP ( 'NONE', ( #15842, #58361, #7527 ) ) ; +#7567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7569 = ORIENTED_EDGE ( 'NONE', *, *, #78512, .F. ) ; +#7570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7571 = ADVANCED_FACE ( 'NONE', ( #30609 ), #18870, .T. ) ; +#7572 = FACE_OUTER_BOUND ( 'NONE', #74020, .T. ) ; +#7573 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 56.83333333333334300, 0.1341879241256075400 ) ) ; +#7574 = AXIS2_PLACEMENT_3D ( 'NONE', #12729, #68732, #25228 ) ; +#7575 = AXIS2_PLACEMENT_3D ( 'NONE', #18684, #62207, #24937 ) ; +#7576 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000003600, 60.52242369685793500, -28.53861367218592800 ) ) ; +#7577 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042455500, 21.59027028261003500, -28.70555803802994500 ) ) ; +#7578 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 21.83333333333334600, 0.9380355014189731800 ) ) ; +#7579 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459558800, 59.08026449164336900, -28.70555803802997700 ) ) ; +#7580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7581 = CONICAL_SURFACE ( 'NONE', #21322, 10.50000000000009600, 0.7853981633974518300 ) ; +#7582 = ORIENTED_EDGE ( 'NONE', *, *, #77516, .T. ) ; +#7583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7585 = ADVANCED_FACE ( 'NONE', ( #4279 ), #66573, .T. ) ; +#7586 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 59.16666666666668600, 1.741883078712356500 ) ) ; +#7587 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63593, #38506, #45021, #7789 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696555402800E-007, 0.0008724363063898905400 ), + .UNSPECIFIED. ) ; +#7588 = ORIENTED_EDGE ( 'NONE', *, *, #48430, .F. ) ; +#7589 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 11.47376207875060000, -28.70555803802994200 ) ) ; +#7590 = ORIENTED_EDGE ( 'NONE', *, *, #69053, .T. ) ; +#7591 = AXIS2_PLACEMENT_3D ( 'NONE', #40248, #21783, #34007 ) ; +#7592 = EDGE_CURVE ( 'NONE', #12931, #30200, #53908, .T. ) ; +#7593 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428627600, 20.52858243452102700, -28.70555803802995200 ) ) ; +#7594 = ADVANCED_FACE ( 'NONE', ( #68525 ), #358, .F. ) ; +#7595 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857124100, 26.42318720225497600, -28.70555803802994200 ) ) ; +#7596 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#7597 = CIRCLE ( 'NONE', #79092, 9.500000000000099500 ) ; +#7598 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7599 = FACE_OUTER_BOUND ( 'NONE', #58814, .T. ) ; +#7600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7601 = ORIENTED_EDGE ( 'NONE', *, *, #70256, .F. ) ; +#7602 = VERTEX_POINT ( 'NONE', #45916 ) ; +#7603 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#7604 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#7605 = EDGE_LOOP ( 'NONE', ( #76478, #38197, #14188, #23673, #11812, #15527, #21360 ) ) ; +#7606 = EDGE_CURVE ( 'NONE', #42888, #7301, #16937, .T. ) ; +#7607 = EDGE_LOOP ( 'NONE', ( #36527, #48748, #30434 ) ) ; +#7608 = VERTEX_POINT ( 'NONE', #33434 ) ; +#7609 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#7610 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#7611 = AXIS2_PLACEMENT_3D ( 'NONE', #13949, #57462, #20203 ) ; +#7612 = VERTEX_POINT ( 'NONE', #2418 ) ; +#7613 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 90.34267608797551900, -28.20555803803014400 ) ) ; +#7614 = ORIENTED_EDGE ( 'NONE', *, *, #80756, .F. ) ; +#7615 = VERTEX_POINT ( 'NONE', #8664 ) ; +#7616 = CARTESIAN_POINT ( 'NONE', ( -3.756937565509201000, 51.43482212736793700, -28.29548618595819700 ) ) ; +#7617 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7621 = ORIENTED_EDGE ( 'NONE', *, *, #14485, .T. ) ; +#7622 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#7623 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455562200, 69.72166103827333900, -28.53892303408224500 ) ) ; +#7624 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60998, #4943, #17745, #61276 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438974832400E-007, 0.0007763347809200210800 ), + .UNSPECIFIED. ) ; +#7625 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280410000, 15.94142842854297200, -28.37229765499280300 ) ) ; +#7626 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 35.05000000000000400, -28.20555803802995200 ) ) ; +#7627 = FACE_OUTER_BOUND ( 'NONE', #39863, .T. ) ; +#7628 = AXIS2_PLACEMENT_3D ( 'NONE', #33924, #77444, #40168 ) ; +#7629 = ORIENTED_EDGE ( 'NONE', *, *, #40758, .T. ) ; +#7630 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 62.66666666666667900, -8.133761268305512700 ) ) ; +#7631 = VERTEX_POINT ( 'NONE', #14944 ) ; +#7632 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7633 = CIRCLE ( 'NONE', #50514, 10.00000000000009200 ) ; +#7634 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 71.43945992495532900, -28.34042301926880500 ) ) ; +#7635 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000001800, 51.96823913367203600, -28.70555803802997700 ) ) ; +#7636 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311236100, 65.80000000000264000, -28.70555803802997700 ) ) ; +#7637 = AXIS2_PLACEMENT_3D ( 'NONE', #77433, #9131, #33917 ) ; +#7638 = CARTESIAN_POINT ( 'NONE', ( -4.801413064971206300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#7639 = CARTESIAN_POINT ( 'NONE', ( -17.14651939117048900, 82.51488052429280600, -28.47263588290807600 ) ) ; +#7640 = ORIENTED_EDGE ( 'NONE', *, *, #3649, .F. ) ; +#7641 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72626, #29142, #35374, #78893 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520682700, 0.004414519045340945000 ), + .UNSPECIFIED. ) ; +#7642 = EDGE_CURVE ( 'NONE', #70227, #15440, #33471, .T. ) ; +#7643 = CONICAL_SURFACE ( 'NONE', #15026, 10.00000000000009200, 0.7853981633974415100 ) ; +#7644 = ORIENTED_EDGE ( 'NONE', *, *, #33204, .F. ) ; +#7645 = CARTESIAN_POINT ( 'NONE', ( -4.002024496668894900, 28.78907889423218300, -28.25433304472392800 ) ) ; +#7646 = VERTEX_POINT ( 'NONE', #77224 ) ; +#7647 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#7648 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 27.83333333333335000, 6.794441961969992500 ) ) ; +#7649 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 61.22294471194857800, -28.20555803803047800 ) ) ; +#7650 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965575000, 41.67701665379186000, -28.20555803802996700 ) ) ; +#7651 = ADVANCED_FACE ( 'NONE', ( #35451 ), #48034, .T. ) ; +#7652 = EDGE_CURVE ( 'NONE', #6774, #43957, #7871, .T. ) ; +#7653 = CIRCLE ( 'NONE', #38422, 9.500000000000095900 ) ; +#7654 = FACE_OUTER_BOUND ( 'NONE', #45217, .T. ) ; +#7655 = EDGE_CURVE ( 'NONE', #5209, #57642, #8151, .T. ) ; +#7656 = ORIENTED_EDGE ( 'NONE', *, *, #44779, .T. ) ; +#7657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29233, #35707, #54458, #17214 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989777896700E-007, 0.0002930330874877079400 ), + .UNSPECIFIED. ) ; +#7658 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034432500, 31.17701665379225800, -28.20555803802996000 ) ) ; +#7659 = EDGE_LOOP ( 'NONE', ( #69153, #9534 ) ) ; +#7660 = ADVANCED_FACE ( 'NONE', ( #49978 ), #52722, .T. ) ; +#7661 = ORIENTED_EDGE ( 'NONE', *, *, #26758, .T. ) ; +#7662 = EDGE_CURVE ( 'NONE', #69047, #22296, #74248, .T. ) ; +#7663 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#7664 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 31.52620220503753900, -28.70555803802995200 ) ) ; +#7665 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, -0.8333333333333262600, -12.20555803803000000 ) ) ; +#7666 = CONICAL_SURFACE ( 'NONE', #79556, 10.50000000000009600, 0.7853981633974500600 ) ; +#7668 = ORIENTED_EDGE ( 'NONE', *, *, #38293, .T. ) ; +#7667 = EDGE_CURVE ( 'NONE', #15447, #44043, #14974, .T. ) ; +#7669 = CONICAL_SURFACE ( 'NONE', #64120, 10.50000000000009600, 0.7853981633974500600 ) ; +#7670 = ORIENTED_EDGE ( 'NONE', *, *, #72071, .F. ) ; +#7671 = AXIS2_PLACEMENT_3D ( 'NONE', #46297, #9325, #40339 ) ; +#7672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7673 = EDGE_LOOP ( 'NONE', ( #42526, #64688, #28118 ) ) ; +#7674 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198453800, 60.90033558196106600, -28.70555803802997700 ) ) ; +#7675 = ORIENTED_EDGE ( 'NONE', *, *, #17607, .T. ) ; +#7676 = ADVANCED_FACE ( 'NONE', ( #79223 ), #77256, .T. ) ; +#7677 = CYLINDRICAL_SURFACE ( 'NONE', #42861, 10.00000000000000200 ) ; +#7678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7679 = VERTEX_POINT ( 'NONE', #28311 ) ; +#7680 = ORIENTED_EDGE ( 'NONE', *, *, #19822, .T. ) ; +#7681 = ORIENTED_EDGE ( 'NONE', *, *, #70009, .T. ) ; +#7682 = VERTEX_POINT ( 'NONE', #78035 ) ; +#7683 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305561600, 71.89604671418324200, -28.70555803802999500 ) ) ; +#7684 = ORIENTED_EDGE ( 'NONE', *, *, #13302, .F. ) ; +#7685 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544437800, 59.72166103827332500, -28.53892303408224200 ) ) ; +#7686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7687 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484625400, 51.37838321498817600, -28.29547179040444100 ) ) ; +#7688 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 61.43945992495501700, -28.34042301926910000 ) ) ; +#7689 = ORIENTED_EDGE ( 'NONE', *, *, #16610, .F. ) ; +#7690 = AXIS2_PLACEMENT_3D ( 'NONE', #3434, #46937, #9710 ) ; +#7691 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#7692 = EDGE_CURVE ( 'NONE', #4794, #53823, #59772, .T. ) ; +#7693 = EDGE_CURVE ( 'NONE', #34811, #13443, #13045, .T. ) ; +#7694 = ADVANCED_FACE ( 'NONE', ( #31539 ), #11091, .F. ) ; +#7695 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428613800, 87.92318720225486600, -28.70555803803047500 ) ) ; +#7697 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571440400, 81.52858243452105600, -28.70555803802997700 ) ) ; +#7696 = AXIS2_PLACEMENT_3D ( 'NONE', #45468, #14249, #1981 ) ; +#7698 = VERTEX_POINT ( 'NONE', #72077 ) ; +#7699 = FACE_OUTER_BOUND ( 'NONE', #13456, .T. ) ; +#7700 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 33.66666666666667900, 1.294441961969997200 ) ) ; +#7701 = ORIENTED_EDGE ( 'NONE', *, *, #29445, .F. ) ; +#7702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7704 = ORIENTED_EDGE ( 'NONE', *, *, #31900, .F. ) ; +#7705 = ORIENTED_EDGE ( 'NONE', *, *, #77933, .T. ) ; +#7706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7707 = ORIENTED_EDGE ( 'NONE', *, *, #73587, .F. ) ; +#7708 = ORIENTED_EDGE ( 'NONE', *, *, #61805, .T. ) ; +#7709 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465416400, 29.49920551340399300, -28.70555803802994200 ) ) ; +#7710 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459539300, 59.08026449164331200, -28.70555803803006300 ) ) ; +#7711 = CARTESIAN_POINT ( 'NONE', ( -10.62858178328636400, 70.16749699759769500, -28.25056166218020700 ) ) ; +#7712 = FACE_OUTER_BOUND ( 'NONE', #67812, .T. ) ; +#7713 = EDGE_CURVE ( 'NONE', #7051, #57615, #45249, .T. ) ; +#7714 = ADVANCED_FACE ( 'NONE', ( #64642 ), #58757, .F. ) ; +#7715 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#7716 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510344300, 18.15930907398619700, -28.35186440610855400 ) ) ; +#7717 = AXIS2_PLACEMENT_3D ( 'NONE', #69125, #31883, #75392 ) ; +#7718 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567400, 26.43535825203924700, -28.53896444442195700 ) ) ; +#7719 = VERTEX_POINT ( 'NONE', #22548 ) ; +#7720 = AXIS2_PLACEMENT_3D ( 'NONE', #41745, #4496, #47983 ) ; +#7721 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.23796787468685200, -28.38801640354855100 ) ) ; +#7722 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217499100, 90.16054007504419600, -28.34042301926922700 ) ) ; +#7723 = ORIENTED_EDGE ( 'NONE', *, *, #55217, .F. ) ; +#7724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8441, #51670, #20999, #64530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438974832400E-007, 0.0007763347809200210800 ), + .UNSPECIFIED. ) ; +#7725 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274707600, 35.05000000000000400, -28.20555803802995200 ) ) ; +#7726 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#7727 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.66749699759768400, -28.20555803802994200 ) ) ; +#7728 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7729 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948461400, 80.58127875436061100, -28.53757464917616500 ) ) ; +#7730 = CIRCLE ( 'NONE', #23876, 10.50000000000009600 ) ; +#7731 = ORIENTED_EDGE ( 'NONE', *, *, #67778, .T. ) ; +#7732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7733 = ORIENTED_EDGE ( 'NONE', *, *, #46629, .F. ) ; +#7734 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459512700, 52.51973550835648300, -28.70555803803011200 ) ) ; +#7735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7736 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#7737 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#7738 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709906600, 41.53732497909461300, -28.41043597897463600 ) ) ; +#7739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7741 = AXIS2_PLACEMENT_3D ( 'NONE', #41395, #4147, #47628 ) ; +#7742 = CONICAL_SURFACE ( 'NONE', #18092, 10.00000000000009400, 0.7853981633974447300 ) ; +#7743 = CIRCLE ( 'NONE', #51422, 10.50000000000009800 ) ; +#7744 = VERTEX_POINT ( 'NONE', #53554 ) ; +#7745 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#7746 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 5.166666666666681200, -2.545304000185620600 ) ) ; +#7747 = AXIS2_PLACEMENT_3D ( 'NONE', #67352, #67620, #55094 ) ; +#7748 = VERTEX_POINT ( 'NONE', #35089 ) ; +#7749 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7750 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#7751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7752 = EDGE_CURVE ( 'NONE', #35884, #55672, #30850, .T. ) ; +#7753 = CONICAL_SURFACE ( 'NONE', #54999, 10.00000000000009200, 0.7853981633974447300 ) ; +#7754 = VERTEX_POINT ( 'NONE', #10307 ) ; +#7755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7756 = FACE_OUTER_BOUND ( 'NONE', #14597, .T. ) ; +#7757 = ORIENTED_EDGE ( 'NONE', *, *, #74539, .T. ) ; +#7758 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819153800, 89.94924284854653300, -28.20555803803030800 ) ) ; +#7759 = ORIENTED_EDGE ( 'NONE', *, *, #53094, .T. ) ; +#7760 = CONICAL_SURFACE ( 'NONE', #30856, 10.00000000000009600, 0.7853981633974447300 ) ; +#7761 = ORIENTED_EDGE ( 'NONE', *, *, #77179, .F. ) ; +#7762 = ORIENTED_EDGE ( 'NONE', *, *, #62888, .T. ) ; +#7763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16878, #54114, #23138, #66647 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001246264537621186500 ), + .UNSPECIFIED. ) ; +#7764 = ORIENTED_EDGE ( 'NONE', *, *, #4718, .F. ) ; +#7765 = EDGE_LOOP ( 'NONE', ( #38933, #58186, #25446 ) ) ; +#7766 = CARTESIAN_POINT ( 'NONE', ( -17.31587870724580500, 41.12316711109007600, -28.43418176890224900 ) ) ; +#7767 = VERTEX_POINT ( 'NONE', #53806 ) ; +#7768 = EDGE_LOOP ( 'NONE', ( #17667, #38722, #9630, #53901, #25642 ) ) ; +#7769 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609190500, 14.68533208989812200, -28.53910738522645100 ) ) ; +#7770 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#7771 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#7772 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312639400, 75.80000000000507000, -28.70555803803014400 ) ) ; +#7773 = FACE_OUTER_BOUND ( 'NONE', #48554, .T. ) ; +#7774 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943314000, 45.54999999999998300, -28.70555803802996700 ) ) ; +#7776 = EDGE_CURVE ( 'NONE', #18567, #51395, #75310, .T. ) ; +#7775 = ORIENTED_EDGE ( 'NONE', *, *, #67676, .F. ) ; +#7777 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050736700, 49.07379779496234600, -28.70555803802996700 ) ) ; +#7778 = ORIENTED_EDGE ( 'NONE', *, *, #49612, .F. ) ; +#7779 = ADVANCED_FACE ( 'NONE', ( #27643 ), #9082, .T. ) ; +#7780 = ORIENTED_EDGE ( 'NONE', *, *, #78003, .F. ) ; +#7781 = EDGE_CURVE ( 'NONE', #63349, #75158, #16379, .T. ) ; +#7782 = ORIENTED_EDGE ( 'NONE', *, *, #75156, .F. ) ; +#7783 = ORIENTED_EDGE ( 'NONE', *, *, #76206, .F. ) ; +#7784 = CARTESIAN_POINT ( 'NONE', ( -16.18908518247001300, 7.619354308029561400, -28.43595586313506700 ) ) ; +#7785 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#7786 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7787 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 70.52242369685794200, -28.53861367218593200 ) ) ; +#7788 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7789 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 12.17681279774500200, -28.70555803802994200 ) ) ; +#7790 = ADVANCED_FACE ( 'NONE', ( #46083 ), #56810, .T. ) ; +#7791 = FACE_OUTER_BOUND ( 'NONE', #24120, .T. ) ; +#7792 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 28.66749699759768400, -28.20555803802994200 ) ) ; +#7793 = ORIENTED_EDGE ( 'NONE', *, *, #38115, .T. ) ; +#7794 = EDGE_CURVE ( 'NONE', #75931, #78128, #1878, .T. ) ; +#7795 = ORIENTED_EDGE ( 'NONE', *, *, #77652, .T. ) ; +#7796 = ADVANCED_FACE ( 'NONE', ( #60727 ), #4578, .T. ) ; +#7797 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#7798 = EDGE_CURVE ( 'NONE', #43752, #46553, #68225, .T. ) ; +#7799 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#7800 = AXIS2_PLACEMENT_3D ( 'NONE', #24157, #61436, #11654 ) ; +#7801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7802 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 11.00000000000001100, -9.205558038030005700 ) ) ; +#7803 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#7804 = CIRCLE ( 'NONE', #6105, 10.00000000000009200 ) ; +#7805 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655646000, 31.17701665379238200, -28.20555803802996000 ) ) ; +#7806 = ORIENTED_EDGE ( 'NONE', *, *, #3647, .F. ) ; +#7807 = ORIENTED_EDGE ( 'NONE', *, *, #21225, .T. ) ; +#7808 = PLANE ( 'NONE', #60211 ) ; +#7809 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#7810 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7811 = AXIS2_PLACEMENT_3D ( 'NONE', #58137, #20889, #64432 ) ; +#7812 = EDGE_CURVE ( 'NONE', #70776, #9002, #42182, .T. ) ; +#7813 = EDGE_CURVE ( 'NONE', #39864, #3390, #53764, .T. ) ; +#7814 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 41.44069092601377900, -28.35186440610859600 ) ) ; +#7815 = EDGE_CURVE ( 'NONE', #19665, #146, #62671, .T. ) ; +#7816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56018, #18769, #74803, #37502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121410544100 ), + .UNSPECIFIED. ) ; +#7817 = PLANE ( 'NONE', #32269 ) ; +#7818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7819 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7820 = AXIS2_PLACEMENT_3D ( 'NONE', #52677, #15435, #58943 ) ; +#7821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7822 = FACE_OUTER_BOUND ( 'NONE', #32155, .T. ) ; +#7823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66143, #22605, #4897, #48391 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722430117000E-007, 0.0002592600401783426800 ), + .UNSPECIFIED. ) ; +#7824 = ORIENTED_EDGE ( 'NONE', *, *, #44007, .F. ) ; +#7825 = EDGE_LOOP ( 'NONE', ( #79504, #59469, #68009, #5370 ) ) ; +#7826 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7827 = ORIENTED_EDGE ( 'NONE', *, *, #14042, .T. ) ; +#7828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56714, #37930, #50704, #13497 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736090218700E-007, 0.0009376786059871887600 ), + .UNSPECIFIED. ) ; +#7829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7830 = EDGE_CURVE ( 'NONE', #4048, #10719, #73372, .T. ) ; +#7831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7832 = AXIS2_PLACEMENT_3D ( 'NONE', #73750, #61256, #11468 ) ; +#7833 = AXIS2_PLACEMENT_3D ( 'NONE', #51374, #1636, #26160 ) ; +#7834 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 22.65857157145701000, -28.20555803802995200 ) ) ; +#7835 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112232100, 18.57332680091159800, -28.37233769390166300 ) ) ; +#7836 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890829100, 80.49763722318472500, -28.32100408376071200 ) ) ; +#7837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25621, #62877, #38081, #823 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852044500, 0.0009376791149930255900 ), + .UNSPECIFIED. ) ; +#7838 = FACE_OUTER_BOUND ( 'NONE', #2554, .T. ) ; +#7839 = EDGE_LOOP ( 'NONE', ( #33674, #13673, #22201 ) ) ; +#7840 = ORIENTED_EDGE ( 'NONE', *, *, #46632, .T. ) ; +#7841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7842 = FACE_OUTER_BOUND ( 'NONE', #68590, .T. ) ; +#7843 = VERTEX_POINT ( 'NONE', #48335 ) ; +#7844 = ORIENTED_EDGE ( 'NONE', *, *, #19293, .F. ) ; +#7845 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389081700, 71.10236277681474300, -28.32100408376090400 ) ) ; +#7846 = VERTEX_POINT ( 'NONE', #29917 ) ; +#7847 = ORIENTED_EDGE ( 'NONE', *, *, #80004, .T. ) ; +#7848 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 54.66666666666667100, -3.705558038030004400 ) ) ; +#7849 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#7850 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 39.35339758437810100, -28.20555803802995200 ) ) ; +#7851 = PLANE ( 'NONE', #6307 ) ; +#7852 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 19.66666666666667900, -5.205558038030003100 ) ) ; +#7853 = AXIS2_PLACEMENT_3D ( 'NONE', #75447, #25965, #69446 ) ; +#7854 = ORIENTED_EDGE ( 'NONE', *, *, #5324, .F. ) ; +#7855 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7856 = VECTOR ( 'NONE', #39655, 1000.000000000000000 ) ; +#7857 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#7858 = ORIENTED_EDGE ( 'NONE', *, *, #64931, .T. ) ; +#7859 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 28.23827450271715000, -28.47230003642276900 ) ) ; +#7860 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654486900, 80.27440177985813800, -28.29986836858026000 ) ) ; +#7861 = ORIENTED_EDGE ( 'NONE', *, *, #78697, .T. ) ; +#7862 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 57.00000000000001400, -1.205558038030002800 ) ) ; +#7863 = ORIENTED_EDGE ( 'NONE', *, *, #78881, .T. ) ; +#7864 = ORIENTED_EDGE ( 'NONE', *, *, #28360, .F. ) ; +#7865 = VERTEX_POINT ( 'NONE', #54877 ) ; +#7866 = ORIENTED_EDGE ( 'NONE', *, *, #3848, .T. ) ; +#7867 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 80.13716795162658000, -28.48697406221667800 ) ) ; +#7868 = FACE_OUTER_BOUND ( 'NONE', #18082, .T. ) ; +#7869 = AXIS2_PLACEMENT_3D ( 'NONE', #79217, #41931, #4668 ) ; +#7870 = EDGE_LOOP ( 'NONE', ( #10609, #31217, #24093 ) ) ; +#7871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65015, #21497, #77499, #40216 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258881786700E-007, 0.0004559721492009624800 ), + .UNSPECIFIED. ) ; +#7872 = CARTESIAN_POINT ( 'NONE', ( 5.883745263583244300, 35.04999999999997600, -28.53994725305375700 ) ) ; +#7873 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7874 = CARTESIAN_POINT ( 'NONE', ( 4.272388555704587900E-015, 43.89610994602600200, -28.37519436813181200 ) ) ; +#7875 = CARTESIAN_POINT ( 'NONE', ( -3.040268958506418000, 20.37561462481247100, -28.30309985153374800 ) ) ; +#7876 = EDGE_CURVE ( 'NONE', #78538, #65437, #25688, .T. ) ; +#7877 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544444500, 89.72166103827285600, -28.53892303408267100 ) ) ; +#7878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7879 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 61.99560977511662700, -28.70555803802997700 ) ) ; +#7880 = AXIS2_PLACEMENT_3D ( 'NONE', #30395, #12141, #67895 ) ; +#7881 = CARTESIAN_POINT ( 'NONE', ( 3.756937565509305800, 81.43482212736775200, -28.29548618595839200 ) ) ; +#7882 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#7883 = CONICAL_SURFACE ( 'NONE', #80576, 10.00000000000009400, 0.7853981633974447300 ) ; +#7884 = VERTEX_POINT ( 'NONE', #30177 ) ; +#7885 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#7886 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#7887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7888 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 61.46283204837340000, -28.48697406221667400 ) ) ; +#7889 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.22294471194861400, -28.20555803802997700 ) ) ; +#7890 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 60.16349705304866500, -28.30782889147482400 ) ) ; +#7891 = PLANE ( 'NONE', #50321 ) ; +#7892 = ADVANCED_FACE ( 'NONE', ( #7145 ), #21782, .T. ) ; +#7893 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609685300, 60.13716795162641700, -28.48697406221641200 ) ) ; +#7894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7895 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#7896 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.56248377813478000, -28.32723995587616300 ) ) ; +#7897 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#7898 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627434900, 15.93535825203924400, -28.53896444442197800 ) ) ; +#7899 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7900 = EDGE_CURVE ( 'NONE', #79164, #40425, #38274, .T. ) ; +#7901 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 60.50000000000001400, 4.650848422521016300 ) ) ; +#7902 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 47.44142842854297000, -28.20555803802996700 ) ) ; +#7903 = EDGE_CURVE ( 'NONE', #26455, #146, #39286, .T. ) ; +#7904 = VERTEX_POINT ( 'NONE', #11913 ) ; +#7905 = ORIENTED_EDGE ( 'NONE', *, *, #4832, .T. ) ; +#7906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7907 = EDGE_LOOP ( 'NONE', ( #75541, #4193, #27861, #6170 ) ) ; +#7908 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.41070809551059300, -28.20555803802996700 ) ) ; +#7909 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 55.80000000000001800, -28.70555803802997700 ) ) ; +#7910 = CARTESIAN_POINT ( 'NONE', ( 17.10696782501636200, 92.65348391250817900, -28.48107268352801200 ) ) ; +#7911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7912 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 25.96443389862716000, -28.54207364681940400 ) ) ; +#7913 = EDGE_CURVE ( 'NONE', #38367, #31778, #24850, .T. ) ; +#7914 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898009200, 71.21894733120747400, -28.33409528117022400 ) ) ; +#7915 = ADVANCED_FACE ( 'NONE', ( #71401 ), #52886, .T. ) ; +#7916 = EDGE_CURVE ( 'NONE', #30197, #70963, #10392, .T. ) ; +#7917 = FACE_OUTER_BOUND ( 'NONE', #80650, .T. ) ; +#7918 = EDGE_LOOP ( 'NONE', ( #50776, #5012, #59221 ) ) ; +#7919 = ORIENTED_EDGE ( 'NONE', *, *, #58237, .T. ) ; +#7920 = CARTESIAN_POINT ( 'NONE', ( 3.639407206442153900, 39.16749699759768800, -28.25435056028471000 ) ) ; +#7921 = EDGE_CURVE ( 'NONE', #44027, #2580, #69437, .T. ) ; +#7922 = VERTEX_POINT ( 'NONE', #49394 ) ; +#7923 = CIRCLE ( 'NONE', #31807, 10.00000000000009200 ) ; +#7924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7925 = ORIENTED_EDGE ( 'NONE', *, *, #42351, .F. ) ; +#7926 = EDGE_LOOP ( 'NONE', ( #66383, #37813, #15814, #68433 ) ) ; +#7927 = ORIENTED_EDGE ( 'NONE', *, *, #46981, .F. ) ; +#7928 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 25.66666666666667900, -8.133761268305512700 ) ) ; +#7929 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7930 = ORIENTED_EDGE ( 'NONE', *, *, #38050, .T. ) ; +#7931 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .F. ) ; +#7932 = AXIS2_PLACEMENT_3D ( 'NONE', #20094, #63618, #26364 ) ; +#7933 = CONICAL_SURFACE ( 'NONE', #36915, 10.50000000000009600, 0.7853981633974500600 ) ; +#7934 = EDGE_CURVE ( 'NONE', #2695, #19608, #76679, .T. ) ; +#7935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7936 = EDGE_CURVE ( 'NONE', #34753, #63837, #62253, .T. ) ; +#7937 = EDGE_CURVE ( 'NONE', #11197, #25518, #54848, .T. ) ; +#7938 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24626, #80649, #18635, #62164 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885322300 ), + .UNSPECIFIED. ) ; +#7939 = CIRCLE ( 'NONE', #53584, 10.50000000000009600 ) ; +#7940 = AXIS2_PLACEMENT_3D ( 'NONE', #60502, #23222, #66749 ) ; +#7941 = ORIENTED_EDGE ( 'NONE', *, *, #10705, .F. ) ; +#7942 = ORIENTED_EDGE ( 'NONE', *, *, #42136, .F. ) ; +#7943 = ORIENTED_EDGE ( 'NONE', *, *, #48999, .F. ) ; +#7944 = VERTEX_POINT ( 'NONE', #37429 ) ; +#7945 = ORIENTED_EDGE ( 'NONE', *, *, #74217, .T. ) ; +#7946 = FACE_BOUND ( 'NONE', #21142, .T. ) ; +#7947 = AXIS2_PLACEMENT_3D ( 'NONE', #63580, #26327, #69803 ) ; +#7948 = AXIS2_PLACEMENT_3D ( 'NONE', #51671, #14462, #57970 ) ; +#7949 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999979400, 60.79999999999982700, -28.20555803803014100 ) ) ; +#7950 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48300, #42062, #79619, #42321 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284151000, 0.0006028148015512185400 ), + .UNSPECIFIED. ) ; +#7951 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855112400, 87.92318720225479500, -28.70555803802997700 ) ) ; +#7952 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, -2.999999999999992900, 9.794441961969996100 ) ) ; +#7953 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 71.25489551879202600, -28.37193179497697000 ) ) ; +#7954 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7955 = FACE_OUTER_BOUND ( 'NONE', #50844, .T. ) ; +#7956 = EDGE_LOOP ( 'NONE', ( #5554, #61146, #47065, #60185 ) ) ; +#7957 = ORIENTED_EDGE ( 'NONE', *, *, #45741, .T. ) ; +#7958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7959 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38710, #76009, #44954, #7722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921852846500E-007, 0.0004084731003434824000 ), + .UNSPECIFIED. ) ; +#7960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7961 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 22.42856308690589600, -28.36981695106778300 ) ) ; +#7962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#7963 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#7964 = CARTESIAN_POINT ( 'NONE', ( -16.10512553857339300, 40.54666532841807900, -28.65803483468210500 ) ) ; +#7965 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7613, #1359, #38610, #13906 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668610666200E-007, 0.0003940053330070031600 ), + .UNSPECIFIED. ) ; +#7966 = ADVANCED_FACE ( 'NONE', ( #44109 ), #67498, .T. ) ; +#7967 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#7968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7969 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515429700, 90.58127875436078100, -28.53757464917570300 ) ) ; +#7970 = CARTESIAN_POINT ( 'NONE', ( 17.90233405035087300, 20.36492161058562900, -28.27580420063966900 ) ) ; +#7971 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 31.50000000000001400, -4.865812075874393000 ) ) ; +#7972 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#7973 = EDGE_CURVE ( 'NONE', #79164, #62131, #3244, .T. ) ; +#7974 = ORIENTED_EDGE ( 'NONE', *, *, #14205, .T. ) ; +#7975 = AXIS2_PLACEMENT_3D ( 'NONE', #10863, #43077, #74388 ) ; +#7976 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#7977 = ORIENTED_EDGE ( 'NONE', *, *, #19386, .F. ) ; +#7978 = CARTESIAN_POINT ( 'NONE', ( -16.29322674320519900, 93.55135913246276400, -28.53222415209327400 ) ) ; +#7979 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#7980 = CARTESIAN_POINT ( 'NONE', ( 9.832817182603664100, 90.56656192502353500, -28.37235298663062700 ) ) ; +#7981 = ADVANCED_FACE ( 'NONE', ( #19823 ), #17876, .F. ) ; +#7982 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#7983 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489072000, 41.12856921007286100, -28.37063977681165700 ) ) ; +#7984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7985 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#7986 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116445800, 20.39435118792235700, -28.41114655922299500 ) ) ; +#7987 = EDGE_LOOP ( 'NONE', ( #47388, #25779, #76167, #11900 ) ) ; +#7988 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#7989 = CONICAL_SURFACE ( 'NONE', #6400, 10.00000000000009200, 0.7853981633974447300 ) ; +#7990 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7991 = VERTEX_POINT ( 'NONE', #43941 ) ; +#7992 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#7993 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7994 = FACE_OUTER_BOUND ( 'NONE', #25467, .T. ) ; +#7995 = AXIS2_PLACEMENT_3D ( 'NONE', #44058, #6834, #50315 ) ; +#7996 = ORIENTED_EDGE ( 'NONE', *, *, #69404, .T. ) ; +#7997 = ADVANCED_FACE ( 'NONE', ( #40247 ), #65582, .T. ) ; +#7998 = CIRCLE ( 'NONE', #23629, 10.00000000000009400 ) ; +#7999 = ORIENTED_EDGE ( 'NONE', *, *, #27386, .T. ) ; +#8000 = ORIENTED_EDGE ( 'NONE', *, *, #28839, .T. ) ; +#8001 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8002 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8003 = EDGE_LOOP ( 'NONE', ( #38749, #35422, #79610, #47881 ) ) ; +#8004 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408273400, 90.38586625357842800, -28.27331438134757100 ) ) ; +#8005 = ORIENTED_EDGE ( 'NONE', *, *, #74117, .T. ) ; +#8006 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 9.760897458958879700, -28.36630947932767600 ) ) ; +#8007 = CONICAL_SURFACE ( 'NONE', #20735, 10.00000000000009400, 0.7853981633974447300 ) ; +#8008 = CARTESIAN_POINT ( 'NONE', ( 4.745461813558604200, 28.59617548195239700, -28.64146967277545000 ) ) ; +#8009 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27130, #64670, #58645, #21414 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.802531543882101300E-017, 0.001246264537621115800 ), + .UNSPECIFIED. ) ; +#8010 = ADVANCED_FACE ( 'NONE', ( #5219 ), #32449, .T. ) ; +#8011 = VERTEX_POINT ( 'NONE', #31748 ) ; +#8012 = CONICAL_SURFACE ( 'NONE', #16542, 10.00000000000009200, 0.7853981633974447300 ) ; +#8013 = EDGE_CURVE ( 'NONE', #35478, #49013, #36356, .T. ) ; +#8014 = VERTEX_POINT ( 'NONE', #44202 ) ; +#8016 = EDGE_CURVE ( 'NONE', #14665, #57451, #34420, .T. ) ; +#8015 = EDGE_LOOP ( 'NONE', ( #11861, #51978, #13835 ) ) ; +#8017 = EDGE_LOOP ( 'NONE', ( #77267, #65451, #20345, #36323, #32839, #29528, #11016 ) ) ; +#8018 = EDGE_LOOP ( 'NONE', ( #59064, #25, #44510, #54820 ) ) ; +#8019 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#8020 = CIRCLE ( 'NONE', #54350, 9.500000000000099500 ) ; +#8021 = EDGE_LOOP ( 'NONE', ( #75371, #62908, #51078 ) ) ; +#8022 = FACE_OUTER_BOUND ( 'NONE', #17117, .T. ) ; +#8023 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 3.000000000000023100, -1.205558038030002800 ) ) ; +#8024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8025 = ORIENTED_EDGE ( 'NONE', *, *, #25828, .T. ) ; +#8026 = ORIENTED_EDGE ( 'NONE', *, *, #13095, .F. ) ; +#8027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8028 = EDGE_CURVE ( 'NONE', #64739, #55373, #48963, .T. ) ; +#8029 = EDGE_CURVE ( 'NONE', #57348, #31766, #23736, .T. ) ; +#8030 = CIRCLE ( 'NONE', #21622, 10.50000000000009200 ) ; +#8031 = ORIENTED_EDGE ( 'NONE', *, *, #40832, .F. ) ; +#8032 = CARTESIAN_POINT ( 'NONE', ( 9.343046065458670700, 89.08026449163855900, -28.70555803803005900 ) ) ; +#8033 = CONICAL_SURFACE ( 'NONE', #10269, 10.00000000000009200, 0.7853981633974447300 ) ; +#8034 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911123700, 71.19833471562196800, -28.28704243186601600 ) ) ; +#8035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8036 = AXIS2_PLACEMENT_3D ( 'NONE', #79398, #42090, #4851 ) ; +#8037 = EDGE_CURVE ( 'NONE', #17663, #54671, #1301, .T. ) ; +#8038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37538, #74844, #50036, #12844 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700545200, 0.0009400395309963802600 ), + .UNSPECIFIED. ) ; +#8039 = EDGE_CURVE ( 'NONE', #10456, #23867, #47755, .T. ) ; +#8040 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 71.43650294695081000, -28.30782889147504400 ) ) ; +#8041 = EDGE_CURVE ( 'NONE', #39513, #48735, #33316, .T. ) ; +#8042 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8043 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 81.43945992495501700, -28.34042301926910000 ) ) ; +#8044 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919000, 24.55000000000000100, -28.65220501466659500 ) ) ; +#8045 = AXIS2_PLACEMENT_3D ( 'NONE', #76499, #64036, #70251 ) ; +#8046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22951, #60231, #72736, #35482 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555115631900E-007, 0.0009605145132142160100 ), + .UNSPECIFIED. ) ; +#8048 = VERTEX_POINT ( 'NONE', #70899 ) ; +#8049 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8050 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120823800, 20.21901109451848600, -28.33427604305564200 ) ) ; +#8051 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8054 = ORIENTED_EDGE ( 'NONE', *, *, #6846, .T. ) ; +#8053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8055 = AXIS2_PLACEMENT_3D ( 'NONE', #16922, #60462, #23179 ) ; +#8056 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180783100, 79.94924284854681700, -28.20555803803030800 ) ) ; +#8057 = AXIS2_PLACEMENT_3D ( 'NONE', #15178, #27455, #8894 ) ; +#8058 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8059 = AXIS2_PLACEMENT_3D ( 'NONE', #46487, #40266, #58777 ) ; +#8060 = ADVANCED_FACE ( 'NONE', ( #80148 ), #27422, .T. ) ; +#8061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8063 = FACE_OUTER_BOUND ( 'NONE', #37087, .T. ) ; +#8064 = VERTEX_POINT ( 'NONE', #33650 ) ; +#8065 = CIRCLE ( 'NONE', #33125, 10.00000000000009200 ) ; +#8066 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#8067 = ORIENTED_EDGE ( 'NONE', *, *, #20331, .F. ) ; +#8068 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 8.833333333333351700, 6.794441961969992500 ) ) ; +#8069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8070 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474192200, 20.86172549728280500, -28.47230003642276200 ) ) ; +#8071 = EDGE_LOOP ( 'NONE', ( #35291, #39949, #9917 ) ) ; +#8072 = FACE_OUTER_BOUND ( 'NONE', #23971, .T. ) ; +#8073 = VERTEX_POINT ( 'NONE', #52371 ) ; +#8074 = VERTEX_POINT ( 'NONE', #15149 ) ; +#8075 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582500, 65.79999999999982700, -28.70525300642874800 ) ) ; +#8076 = ADVANCED_FACE ( 'NONE', ( #50910 ), #61678, .F. ) ; +#8077 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 40.34772751981643800, -28.70555803802999500 ) ) ; +#8078 = EDGE_CURVE ( 'NONE', #8083, #78730, #18849, .T. ) ; +#8079 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 89.94924284854654700, -28.20555803803014400 ) ) ; +#8080 = CIRCLE ( 'NONE', #36327, 10.00000000000009200 ) ; +#8081 = ORIENTED_EDGE ( 'NONE', *, *, #50135, .F. ) ; +#8082 = CIRCLE ( 'NONE', #42005, 10.00000000000009200 ) ; +#8083 = VERTEX_POINT ( 'NONE', #46373 ) ; +#8084 = ADVANCED_FACE ( 'NONE', ( #15910 ), #28605, .T. ) ; +#8085 = EDGE_CURVE ( 'NONE', #47124, #61277, #45044, .T. ) ; +#8086 = ORIENTED_EDGE ( 'NONE', *, *, #3750, .T. ) ; +#8087 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8088 = AXIS2_PLACEMENT_3D ( 'NONE', #13422, #56926, #19661 ) ; +#8089 = VERTEX_POINT ( 'NONE', #15418 ) ; +#8090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8091 = ORIENTED_EDGE ( 'NONE', *, *, #3649, .T. ) ; +#8092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8093 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#8094 = CIRCLE ( 'NONE', #10641, 9.500000000000099500 ) ; +#8095 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8097 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3595, #59662, #78427, #41144 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989880016600E-007, 0.0002930330874877997200 ), + .UNSPECIFIED. ) ; +#8098 = ADVANCED_FACE ( 'NONE', ( #30535 ), #59717, .F. ) ; +#8099 = VERTEX_POINT ( 'NONE', #9416 ) ; +#8100 = AXIS2_PLACEMENT_3D ( 'NONE', #22660, #53649, #59931 ) ; +#8101 = EDGE_LOOP ( 'NONE', ( #33785, #69602, #69546 ) ) ; +#8102 = CIRCLE ( 'NONE', #17978, 9.500000000000097700 ) ; +#8103 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8104 = ADVANCED_FACE ( 'NONE', ( #43140 ), #26634, .F. ) ; +#8105 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 52.50000000000001400, 2.454695999814380200 ) ) ; +#8106 = AXIS2_PLACEMENT_3D ( 'NONE', #27575, #71065, #33809 ) ; +#8107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8108 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#8109 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 17.50000000000002500, 4.650848422521012700 ) ) ; +#8110 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056670900, 14.04999999999997800, -28.70555803802992800 ) ) ; +#8111 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 41.24660241562189400, -28.20555803802996700 ) ) ; +#8112 = EDGE_CURVE ( 'NONE', #33308, #67641, #4390, .T. ) ; +#8113 = CONICAL_SURFACE ( 'NONE', #53421, 10.50000000000009600, 0.7853981633974500600 ) ; +#8114 = CARTESIAN_POINT ( 'NONE', ( -16.93476732735787100, 26.95995918884885300, -28.51837550109417000 ) ) ; +#8115 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 54.83333333333334300, -4.152999154772353500 ) ) ; +#8116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8117 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12322, #18563, #74598, #37291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276831275100E-007, 0.0007677744771234614400 ), + .UNSPECIFIED. ) ; +#8118 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 29.02242369685794200, -28.53861367218590300 ) ) ; +#8119 = ORIENTED_EDGE ( 'NONE', *, *, #23342, .T. ) ; +#8120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35682, #72946, #48144, #10927 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662540018300, 0.0009765394310395465100 ), + .UNSPECIFIED. ) ; +#8121 = ORIENTED_EDGE ( 'NONE', *, *, #71824, .T. ) ; +#8122 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#8123 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312764400, 9.997690108970898500, -28.61774594593776700 ) ) ; +#8124 = ORIENTED_EDGE ( 'NONE', *, *, #27447, .T. ) ; +#8125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8126 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 51.43945992495517300, -28.34042301926893600 ) ) ; +#8127 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609206100, 14.68533208989820000, -28.53910738522649400 ) ) ; +#8128 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8129 = CIRCLE ( 'NONE', #54761, 9.500000000000097700 ) ; +#8130 = ORIENTED_EDGE ( 'NONE', *, *, #54292, .F. ) ; +#8131 = FACE_OUTER_BOUND ( 'NONE', #11338, .T. ) ; +#8132 = EDGE_CURVE ( 'NONE', #2565, #28549, #70699, .T. ) ; +#8133 = ORIENTED_EDGE ( 'NONE', *, *, #27655, .F. ) ; +#8134 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#8135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8136 = CIRCLE ( 'NONE', #16249, 10.00000000000009200 ) ; +#8137 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75116, #50320, #69121, #31877 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936601600, 0.0005776948474817116700 ), + .UNSPECIFIED. ) ; +#8138 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#8139 = VERTEX_POINT ( 'NONE', #22210 ) ; +#8140 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 81.25732391202397800, -28.20555803802997700 ) ) ; +#8141 = ORIENTED_EDGE ( 'NONE', *, *, #18537, .F. ) ; +#8143 = EDGE_LOOP ( 'NONE', ( #2451, #38378, #47402, #2479 ) ) ; +#8142 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 15.94142842854248700, -28.20555803803042500 ) ) ; +#8144 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#8145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8146 = AXIS2_PLACEMENT_3D ( 'NONE', #28231, #71721, #34457 ) ; +#8147 = EDGE_CURVE ( 'NONE', #70245, #29278, #47024, .T. ) ; +#8148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8149 = EDGE_CURVE ( 'NONE', #69684, #7843, #56234, .T. ) ; +#8150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8151 = LINE ( 'NONE', #33980, #2296 ) ; +#8152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#8153 = EDGE_CURVE ( 'NONE', #46932, #75015, #41773, .T. ) ; +#8154 = PLANE ( 'NONE', #79881 ) ; +#8155 = ORIENTED_EDGE ( 'NONE', *, *, #48520, .T. ) ; +#8156 = AXIS2_PLACEMENT_3D ( 'NONE', #76971, #26954, #39699 ) ; +#8157 = CIRCLE ( 'NONE', #34164, 10.00000000000009200 ) ; +#8158 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 58.33333333333334300, -5.205558038030008400 ) ) ; +#8159 = ORIENTED_EDGE ( 'NONE', *, *, #25839, .F. ) ; +#8160 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#8161 = VERTEX_POINT ( 'NONE', #66008 ) ; +#8162 = ORIENTED_EDGE ( 'NONE', *, *, #27740, .F. ) ; +#8163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8164 = ORIENTED_EDGE ( 'NONE', *, *, #34307, .T. ) ; +#8165 = CONICAL_SURFACE ( 'NONE', #58522, 10.00000000000009200, 0.7853981633974447300 ) ; +#8166 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#8167 = AXIS2_PLACEMENT_3D ( 'NONE', #22030, #65565, #28325 ) ; +#8168 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8169 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#8170 = AXIS2_PLACEMENT_3D ( 'NONE', #7114, #50611, #13411 ) ; +#8171 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21318, #9029, #27854, #71342 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#8172 = EDGE_CURVE ( 'NONE', #19770, #1596, #27366, .T. ) ; +#8173 = ORIENTED_EDGE ( 'NONE', *, *, #38890, .F. ) ; +#8174 = AXIS2_PLACEMENT_3D ( 'NONE', #40193, #2932, #46421 ) ; +#8175 = ORIENTED_EDGE ( 'NONE', *, *, #54060, .F. ) ; +#8176 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 70.16054007504432400, -28.34042301926905700 ) ) ; +#8177 = ORIENTED_EDGE ( 'NONE', *, *, #38177, .T. ) ; +#8178 = EDGE_LOOP ( 'NONE', ( #43141, #20474, #72803 ) ) ; +#8179 = ADVANCED_FACE ( 'NONE', ( #63626 ), #35011, .T. ) ; +#8180 = CIRCLE ( 'NONE', #1746, 10.00000000000009200 ) ; +#8181 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#8182 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#8183 = ADVANCED_FACE ( 'NONE', ( #78204 ), #41196, .F. ) ; +#8184 = EDGE_CURVE ( 'NONE', #52508, #38287, #57737, .T. ) ; +#8185 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 23.50000000000002100, 4.650848422521016300 ) ) ; +#8186 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462697700, 80.20590598242371500, -28.39369363572354700 ) ) ; +#8187 = AXIS2_PLACEMENT_3D ( 'NONE', #55359, #18123, #61660 ) ; +#8188 = AXIS2_PLACEMENT_3D ( 'NONE', #38572, #69609, #75873 ) ; +#8189 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 30.94069092601378300, -28.35186440610858200 ) ) ; +#8190 = CARTESIAN_POINT ( 'NONE', ( 17.37150777124372800, 71.43250300240197200, -28.25053031809502000 ) ) ; +#8191 = ADVANCED_FACE ( 'NONE', ( #12018 ), #17169, .F. ) ; +#8192 = FACE_OUTER_BOUND ( 'NONE', #53698, .T. ) ; +#8193 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101300, 40.29999999999999000, -28.45034744217088700 ) ) ; +#8194 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472982400, 28.63131911501866600, -28.51286550264547900 ) ) ; +#8195 = ORIENTED_EDGE ( 'NONE', *, *, #38637, .F. ) ; +#8196 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 9.722944711948578300, -28.20555803802994200 ) ) ; +#8197 = VERTEX_POINT ( 'NONE', #23020 ) ; +#8198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8200 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148349900, 23.59761904761936800, -28.70555803802994200 ) ) ; +#8201 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 67.00000000000000000, -9.205558038030005700 ) ) ; +#8202 = CONICAL_SURFACE ( 'NONE', #67771, 10.50000000000009800, 0.7853981633974518300 ) ; +#8203 = AXIS2_PLACEMENT_3D ( 'NONE', #7259, #50766, #13564 ) ; +#8204 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8205 = FACE_OUTER_BOUND ( 'NONE', #68493, .T. ) ; +#8206 = VERTEX_POINT ( 'NONE', #66533 ) ; +#8207 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063433500, 18.00210619075126000, -28.25343951603342400 ) ) ; +#8208 = VERTEX_POINT ( 'NONE', #29319 ) ; +#8209 = CIRCLE ( 'NONE', #47407, 10.00000000000009600 ) ; +#8210 = FACE_OUTER_BOUND ( 'NONE', #3154, .T. ) ; +#8211 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52861, #9624, #59410, #65681 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001694669825367232200 ), + .UNSPECIFIED. ) ; +#8212 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#8213 = ORIENTED_EDGE ( 'NONE', *, *, #6261, .F. ) ; +#8214 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#8215 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#8216 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919700, 14.05000000000000400, -28.65220501466659200 ) ) ; +#8217 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150699400, 20.32033471810044000, -28.30868034705249800 ) ) ; +#8218 = VERTEX_POINT ( 'NONE', #16754 ) ; +#8219 = AXIS2_PLACEMENT_3D ( 'NONE', #28873, #10321, #66091 ) ; +#8220 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#8221 = CARTESIAN_POINT ( 'NONE', ( -10.04026895850642000, 9.875614624812469000, -28.30309985153373400 ) ) ; +#8222 = EDGE_CURVE ( 'NONE', #79578, #26321, #74313, .T. ) ; +#8223 = FACE_OUTER_BOUND ( 'NONE', #23206, .T. ) ; +#8224 = CARTESIAN_POINT ( 'NONE', ( -24.45956414984537000, 0.5404358501551617100, -22.23742756933473800 ) ) ; +#8225 = ORIENTED_EDGE ( 'NONE', *, *, #26658, .F. ) ; +#8226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8228 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 29.33333333333333900, 3.124568980892187500 ) ) ; +#8227 = FACE_OUTER_BOUND ( 'NONE', #18936, .T. ) ; +#8229 = ORIENTED_EDGE ( 'NONE', *, *, #47625, .F. ) ; +#8230 = CARTESIAN_POINT ( 'NONE', ( -17.24374921994469300, 50.98711723699934600, -28.45058723417198400 ) ) ; +#8231 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.90050506338821600, -28.70555803802997700 ) ) ; +#8232 = ORIENTED_EDGE ( 'NONE', *, *, #45693, .T. ) ; +#8233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8234 = ORIENTED_EDGE ( 'NONE', *, *, #13070, .F. ) ; +#8235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8236 = ORIENTED_EDGE ( 'NONE', *, *, #3132, .F. ) ; +#8237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8238 = ORIENTED_EDGE ( 'NONE', *, *, #35700, .T. ) ; +#8239 = FACE_OUTER_BOUND ( 'NONE', #80775, .T. ) ; +#8240 = CARTESIAN_POINT ( 'NONE', ( 12.88374526358358800, 14.05000000000018900, -28.53994725305414100 ) ) ; +#8241 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#8243 = ORIENTED_EDGE ( 'NONE', *, *, #75895, .F. ) ; +#8242 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274344000, 36.93535825203924400, -28.53896444442198500 ) ) ; +#8244 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477740100, 9.714104307647168900, -28.27354076558353700 ) ) ; +#8245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8246 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686886600, 51.58005252438356800, -28.24986299608881900 ) ) ; +#8247 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 31.11077422949656700, -28.37255355648633400 ) ) ; +#8248 = ORIENTED_EDGE ( 'NONE', *, *, #8624, .T. ) ; +#8249 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.65857157145700300, -28.20555803802997700 ) ) ; +#8250 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985187900, 15.00238095238098900, -28.70555803803042500 ) ) ; +#8251 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#8252 = EDGE_CURVE ( 'NONE', #907, #24258, #13969, .T. ) ; +#8253 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.46616414991787300, -28.37247596307128800 ) ) ; +#8254 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 61.43945992495532900, -28.34042301926881200 ) ) ; +#8255 = VERTEX_POINT ( 'NONE', #79057 ) ; +#8256 = FACE_OUTER_BOUND ( 'NONE', #58261, .T. ) ; +#8257 = EDGE_CURVE ( 'NONE', #16097, #34605, #12889, .T. ) ; +#8258 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 80.34267608797603100, -28.20555803802997700 ) ) ; +#8259 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 60.16749699759768800, -28.20555803802997700 ) ) ; +#8260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8261 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#8262 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8263 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957512600, 21.59027028261001400, -28.70555803802993800 ) ) ; +#8264 = EDGE_CURVE ( 'NONE', #64652, #80558, #64876, .T. ) ; +#8265 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.23796787468680200, -28.38801640354855800 ) ) ; +#8266 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25477, #62731, #19475, #63002 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025987500, 0.0006251342085520325900 ), + .UNSPECIFIED. ) ; +#8267 = EDGE_CURVE ( 'NONE', #36904, #60644, #79201, .T. ) ; +#8268 = AXIS2_PLACEMENT_3D ( 'NONE', #38194, #63542, #26285 ) ; +#8269 = LINE ( 'NONE', #13033, #43328 ) ; +#8270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6710, #43938, #19220, #62761 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-017, 0.001043664170963529100 ), + .UNSPECIFIED. ) ; +#8271 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730039900, 90.01262610361114000, -28.29936525552468800 ) ) ; +#8272 = VERTEX_POINT ( 'NONE', #36061 ) ; +#8273 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22649, #41385, #60189, #22906 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678001340000, 0.0007670610367942833100 ), + .UNSPECIFIED. ) ; +#8274 = ORIENTED_EDGE ( 'NONE', *, *, #31682, .T. ) ; +#8275 = ADVANCED_FACE ( 'NONE', ( #591 ), #29844, .F. ) ; +#8276 = CIRCLE ( 'NONE', #4086, 9.500000000000099500 ) ; +#8277 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 0.8333333333333370300, 0.1341879241256075400 ) ) ; +#8278 = AXIS2_PLACEMENT_3D ( 'NONE', #42177, #4940, #48429 ) ; +#8280 = EDGE_LOOP ( 'NONE', ( #28927, #31629, #64665 ) ) ; +#8279 = EDGE_CURVE ( 'NONE', #6243, #53675, #46300, .T. ) ; +#8281 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964000, 28.65930907398620100, -28.35186440610856500 ) ) ; +#8282 = EDGE_CURVE ( 'NONE', #20135, #22718, #48257, .T. ) ; +#8283 = CARTESIAN_POINT ( 'NONE', ( 17.38218670428150900, 38.89495213045232400, -28.41843566570053500 ) ) ; +#8284 = EDGE_CURVE ( 'NONE', #54671, #20926, #64760, .T. ) ; +#8285 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000035100, 70.69949493661177100, -28.70555803802997700 ) ) ; +#8286 = ADVANCED_FACE ( 'NONE', ( #79452 ), #44340, .T. ) ; +#8287 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34206, #52940, #71751, #34479 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047504872900E-007, 0.0003301033223275548900 ), + .UNSPECIFIED. ) ; +#8288 = AXIS2_PLACEMENT_3D ( 'NONE', #5563, #36554, #17818 ) ; +#8289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8290 = FACE_OUTER_BOUND ( 'NONE', #53263, .T. ) ; +#8291 = FACE_OUTER_BOUND ( 'NONE', #118, .T. ) ; +#8292 = ORIENTED_EDGE ( 'NONE', *, *, #32008, .F. ) ; +#8293 = AXIS2_PLACEMENT_3D ( 'NONE', #74953, #37649, #400 ) ; +#8294 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#8295 = FACE_OUTER_BOUND ( 'NONE', #41137, .T. ) ; +#8296 = AXIS2_PLACEMENT_3D ( 'NONE', #9058, #15362, #46311 ) ; +#8297 = ORIENTED_EDGE ( 'NONE', *, *, #35255, .T. ) ; +#8298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8299 = EDGE_CURVE ( 'NONE', #10062, #48654, #50232, .T. ) ; +#8300 = EDGE_LOOP ( 'NONE', ( #72211, #45684, #1136, #54172, #51765 ) ) ; +#8301 = AXIS2_PLACEMENT_3D ( 'NONE', #40399, #3127, #46636 ) ; +#8302 = AXIS2_PLACEMENT_3D ( 'NONE', #22902, #29204, #47613 ) ; +#8303 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8305 = ADVANCED_FACE ( 'NONE', ( #60957 ), #11316, .F. ) ; +#8306 = FACE_OUTER_BOUND ( 'NONE', #64574, .T. ) ; +#8307 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8308 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 72.31032580521099400, -28.59353418718932400 ) ) ; +#8309 = FACE_OUTER_BOUND ( 'NONE', #20693, .T. ) ; +#8310 = ORIENTED_EDGE ( 'NONE', *, *, #53704, .T. ) ; +#8311 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8312 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655593200, 49.42298334620760900, -28.20555803802997400 ) ) ; +#8313 = ORIENTED_EDGE ( 'NONE', *, *, #57265, .T. ) ; +#8314 = ORIENTED_EDGE ( 'NONE', *, *, #75121, .F. ) ; +#8315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8316 = VERTEX_POINT ( 'NONE', #42831 ) ; +#8317 = CARTESIAN_POINT ( 'NONE', ( -10.53052054780170200, 91.59999999999999400, -28.70555803802999500 ) ) ; +#8318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24429, #61705, #49397, #12188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921918207800E-007, 0.0004084731003435011000 ), + .UNSPECIFIED. ) ; +#8319 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#8320 = ORIENTED_EDGE ( 'NONE', *, *, #48338, .T. ) ; +#8321 = CIRCLE ( 'NONE', #42154, 10.50000000000009600 ) ; +#8322 = ORIENTED_EDGE ( 'NONE', *, *, #44918, .T. ) ; +#8323 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819000, 28.63131911501876900, -28.51286550264507700 ) ) ; +#8324 = ORIENTED_EDGE ( 'NONE', *, *, #41675, .F. ) ; +#8325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33087, #70338, #39324, #2053 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279228135470000E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#8326 = ORIENTED_EDGE ( 'NONE', *, *, #52835, .F. ) ; +#8327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8328 = CONICAL_SURFACE ( 'NONE', #19037, 10.50000000000009800, 0.7853981633974518300 ) ; +#8329 = AXIS2_PLACEMENT_3D ( 'NONE', #17914, #55161, #5411 ) ; +#8330 = ORIENTED_EDGE ( 'NONE', *, *, #50562, .F. ) ; +#8331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8332 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#8333 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.666666666666682100, -8.133761268305512700 ) ) ; +#8334 = ORIENTED_EDGE ( 'NONE', *, *, #11009, .T. ) ; +#8335 = CONICAL_SURFACE ( 'NONE', #6892, 10.50000000000009600, 0.7853981633974518300 ) ; +#8336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8337 = AXIS2_PLACEMENT_3D ( 'NONE', #46365, #58921, #27676 ) ; +#8338 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#8339 = EDGE_CURVE ( 'NONE', #25412, #35314, #35809, .T. ) ; +#8340 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 28.63131911501876600, -28.51286550264508100 ) ) ; +#8341 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 37.17143691309412600, -28.36981695106780400 ) ) ; +#8342 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492359300, 58.56055603621145200, -28.70555803803001300 ) ) ; +#8343 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8344 = AXIS2_PLACEMENT_3D ( 'NONE', #52186, #76977, #64769 ) ; +#8345 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#8346 = CIRCLE ( 'NONE', #45360, 10.00000000000009200 ) ; +#8347 = FACE_OUTER_BOUND ( 'NONE', #51352, .T. ) ; +#8348 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8349 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8350 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .T. ) ; +#8351 = PLANE ( 'NONE', #16347 ) ; +#8352 = ORIENTED_EDGE ( 'NONE', *, *, #34526, .F. ) ; +#8353 = CONICAL_SURFACE ( 'NONE', #56137, 10.50000000000009800, 0.7853981633974500600 ) ; +#8354 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.56248377813451400, -28.32723995587591400 ) ) ; +#8355 = CARTESIAN_POINT ( 'NONE', ( -5.294162141782174500, 35.05000000000000400, -28.37136602294609500 ) ) ; +#8357 = ORIENTED_EDGE ( 'NONE', *, *, #71709, .F. ) ; +#8356 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8358 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#8359 = ADVANCED_FACE ( 'NONE', ( #62916 ), #58981, .F. ) ; +#8360 = CONICAL_SURFACE ( 'NONE', #43666, 10.50000000000009600, 0.7853981633974500600 ) ; +#8361 = CIRCLE ( 'NONE', #78308, 10.50000000000009600 ) ; +#8363 = EDGE_CURVE ( 'NONE', #74194, #54501, #21364, .T. ) ; +#8362 = ORIENTED_EDGE ( 'NONE', *, *, #74539, .F. ) ; +#8364 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#8365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69835, #26357, #38800, #1558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004023800 ), + .UNSPECIFIED. ) ; +#8366 = EDGE_CURVE ( 'NONE', #58920, #11715, #75522, .T. ) ; +#8367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8368 = ORIENTED_EDGE ( 'NONE', *, *, #53690, .T. ) ; +#8369 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 30.94069092601377900, -28.35186440610858600 ) ) ; +#8370 = ORIENTED_EDGE ( 'NONE', *, *, #39869, .T. ) ; +#8371 = ADVANCED_FACE ( 'NONE', ( #13271 ), #9330, .T. ) ; +#8372 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 50.33333333333332900, -5.535685056952199400 ) ) ; +#8373 = EDGE_CURVE ( 'NONE', #71618, #55345, #25921, .T. ) ; +#8374 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8375 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 15.33333333333333700, -8.133761268305512700 ) ) ; +#8376 = EDGE_CURVE ( 'NONE', #19644, #62098, #6878, .T. ) ; +#8377 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27601, #64873, #40075, #2801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213690225700E-007, 0.0008724366121414639100 ), + .UNSPECIFIED. ) ; +#8378 = CIRCLE ( 'NONE', #7948, 10.00000000000009200 ) ; +#8379 = AXIS2_PLACEMENT_3D ( 'NONE', #8364, #51875, #14659 ) ; +#8380 = ORIENTED_EDGE ( 'NONE', *, *, #30031, .F. ) ; +#8381 = EDGE_CURVE ( 'NONE', #66098, #64, #73215, .T. ) ; +#8382 = ORIENTED_EDGE ( 'NONE', *, *, #61562, .T. ) ; +#8383 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 73.65857157145693200, -28.20555803802997700 ) ) ; +#8384 = ADVANCED_FACE ( 'NONE', ( #42420 ), #40483, .T. ) ; +#8385 = EDGE_LOOP ( 'NONE', ( #25622, #67014, #65025, #21380, #30815 ) ) ; +#8386 = ORIENTED_EDGE ( 'NONE', *, *, #11280, .F. ) ; +#8387 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 52.66666666666668600, 4.294441961969993400 ) ) ; +#8388 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#8389 = ORIENTED_EDGE ( 'NONE', *, *, #64663, .F. ) ; +#8390 = CARTESIAN_POINT ( 'NONE', ( -1.314034490221691600, 35.04999999999997600, -28.37321477197628600 ) ) ; +#8391 = FACE_OUTER_BOUND ( 'NONE', #20924, .T. ) ; +#8392 = FACE_OUTER_BOUND ( 'NONE', #27938, .T. ) ; +#8393 = ORIENTED_EDGE ( 'NONE', *, *, #46984, .F. ) ; +#8394 = AXIS2_PLACEMENT_3D ( 'NONE', #73235, #79492, #17203 ) ; +#8395 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64474, #20939, #27201, #70682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849845500, 0.0007596411030280959600 ), + .UNSPECIFIED. ) ; +#8396 = EDGE_LOOP ( 'NONE', ( #79916, #40762, #25835, #73837, #49731 ) ) ; +#8397 = EDGE_CURVE ( 'NONE', #17884, #22368, #58729, .T. ) ; +#8398 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#8399 = EDGE_CURVE ( 'NONE', #61281, #78215, #44227, .T. ) ; +#8400 = CARTESIAN_POINT ( 'NONE', ( -10.36059854261446500, 49.66749699759768100, -28.25434854811490100 ) ) ; +#8401 = EDGE_CURVE ( 'NONE', #37840, #48902, #29869, .T. ) ; +#8402 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784445100, 55.79999999999974800, -28.20555803803014400 ) ) ; +#8403 = ADVANCED_FACE ( 'NONE', ( #31756 ), #7377, .F. ) ; +#8404 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#8405 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 51.25732391202386400, -28.20555803803014400 ) ) ; +#8406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8407 = CONICAL_SURFACE ( 'NONE', #75285, 10.50000000000009600, 0.7853981633974500600 ) ; +#8408 = ORIENTED_EDGE ( 'NONE', *, *, #70991, .F. ) ; +#8409 = AXIS2_PLACEMENT_3D ( 'NONE', #56826, #19566, #63091 ) ; +#8410 = CARTESIAN_POINT ( 'NONE', ( 10.87403623543732300, 9.632690823624360000, -28.36487527072597800 ) ) ; +#8411 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#8412 = ORIENTED_EDGE ( 'NONE', *, *, #66703, .T. ) ; +#8413 = LINE ( 'NONE', #71956, #68777 ) ; +#8414 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 77.94142842854310500, -28.20555803802997700 ) ) ; +#8415 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8416 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123140300, 19.81139552890326200, -28.53900456328672100 ) ) ; +#8417 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205788800, 71.51754275546335300, -28.27504145778830800 ) ) ; +#8418 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868607900, 71.58005252438374600, -28.24986299608875500 ) ) ; +#8419 = FACE_OUTER_BOUND ( 'NONE', #41601, .T. ) ; +#8420 = EDGE_CURVE ( 'NONE', #59962, #80699, #27886, .T. ) ; +#8421 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#8422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8423 = AXIS2_PLACEMENT_3D ( 'NONE', #46797, #9554, #53067 ) ; +#8424 = AXIS2_PLACEMENT_3D ( 'NONE', #158, #43644, #6423 ) ; +#8425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26187, #63446, #19924, #32417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104770300, 0.0005411754951802947400 ), + .UNSPECIFIED. ) ; +#8426 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8428 = VERTEX_POINT ( 'NONE', #56684 ) ; +#8429 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#8430 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389081700, 81.10236277681474300, -28.32100408376090800 ) ) ; +#8431 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#8432 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 56.16666666666667900, 0.9380355014189834000 ) ) ; +#8433 = CIRCLE ( 'NONE', #50012, 10.00000000000009400 ) ; +#8434 = ORIENTED_EDGE ( 'NONE', *, *, #57094, .T. ) ; +#8435 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 90.10230989102912200, -28.61774594594330900 ) ) ; +#8436 = FACE_OUTER_BOUND ( 'NONE', #67584, .T. ) ; +#8437 = ORIENTED_EDGE ( 'NONE', *, *, #38400, .T. ) ; +#8438 = VERTEX_POINT ( 'NONE', #50388 ) ; +#8439 = FACE_OUTER_BOUND ( 'NONE', #26341, .T. ) ; +#8440 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8441 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#8442 = AXIS2_PLACEMENT_3D ( 'NONE', #42756, #73790, #48985 ) ; +#8443 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 80.51916201875612000, -28.45106778992441600 ) ) ; +#8444 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#8445 = ORIENTED_EDGE ( 'NONE', *, *, #32489, .T. ) ; +#8446 = AXIS2_PLACEMENT_3D ( 'NONE', #72541, #35285, #78800 ) ; +#8447 = CIRCLE ( 'NONE', #44125, 10.00000000000009200 ) ; +#8448 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#8449 = CIRCLE ( 'NONE', #35540, 10.50000000000009600 ) ; +#8450 = ORIENTED_EDGE ( 'NONE', *, *, #73257, .T. ) ; +#8451 = EDGE_CURVE ( 'NONE', #70940, #80445, #15370, .T. ) ; +#8452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8453 = AXIS2_PLACEMENT_3D ( 'NONE', #74637, #49831, #12623 ) ; +#8454 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 21.33333333333334300, -5.205558038030008400 ) ) ; +#8455 = ORIENTED_EDGE ( 'NONE', *, *, #78104, .T. ) ; +#8456 = AXIS2_PLACEMENT_3D ( 'NONE', #16354, #59879, #22598 ) ; +#8457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9110, #15403, #71421, #34165 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714727609900E-007, 0.0005869108620977558700 ), + .UNSPECIFIED. ) ; +#8458 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328952600, 17.86201280598322000, -28.29447340919142900 ) ) ; +#8459 = ADVANCED_FACE ( 'NONE', ( #15200 ), #38490, .T. ) ; +#8460 = FACE_OUTER_BOUND ( 'NONE', #26179, .T. ) ; +#8461 = ORIENTED_EDGE ( 'NONE', *, *, #4029, .F. ) ; +#8462 = AXIS2_PLACEMENT_3D ( 'NONE', #20580, #64122, #26837 ) ; +#8463 = ORIENTED_EDGE ( 'NONE', *, *, #48962, .T. ) ; +#8464 = ORIENTED_EDGE ( 'NONE', *, *, #29804, .T. ) ; +#8465 = ORIENTED_EDGE ( 'NONE', *, *, #49510, .T. ) ; +#8466 = CIRCLE ( 'NONE', #9885, 10.50000000000009900 ) ; +#8467 = ADVANCED_FACE ( 'NONE', ( #77487 ), #23968, .T. ) ; +#8468 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736714400, 35.05000000000001100, -28.70555803802995200 ) ) ; +#8469 = ORIENTED_EDGE ( 'NONE', *, *, #40084, .F. ) ; +#8470 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269466700, 80.01262610361159500, -28.29936525552457400 ) ) ; +#8471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8472 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 64.83333333333335700, 6.794441961969992500 ) ) ; +#8473 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6267, #74554, #12535, #56034 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726972850400, 0.0008135742306946909600 ), + .UNSPECIFIED. ) ; +#8474 = FACE_OUTER_BOUND ( 'NONE', #31067, .T. ) ; +#8476 = EDGE_LOOP ( 'NONE', ( #16853, #54620, #77910, #63094 ) ) ; +#8475 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999991700, 10.46823913367206800, -28.70555803802994200 ) ) ; +#8477 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#8478 = EDGE_CURVE ( 'NONE', #13531, #31176, #873, .T. ) ; +#8479 = ORIENTED_EDGE ( 'NONE', *, *, #24285, .F. ) ; +#8480 = ADVANCED_FACE ( 'NONE', ( #73588 ), #53126, .T. ) ; +#8481 = ORIENTED_EDGE ( 'NONE', *, *, #74318, .T. ) ; +#8482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8483 = EDGE_CURVE ( 'NONE', #17037, #28119, #67223, .T. ) ; +#8484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8485 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124978900, 85.13282980700518000, -28.53914313452737900 ) ) ; +#8486 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#8487 = CARTESIAN_POINT ( 'NONE', ( -16.56643609059976900, 12.87492275335523900, -28.58387515229125200 ) ) ; +#8488 = CONICAL_SURFACE ( 'NONE', #51093, 10.00000000000009600, 0.7853981633974482800 ) ; +#8489 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8490 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 65.80000000000001100, -28.70555803802997700 ) ) ; +#8491 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30204, #67436, #48895, #11690 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390015080500E-007, 0.0008082646680356938700 ), + .UNSPECIFIED. ) ; +#8492 = EDGE_CURVE ( 'NONE', #50435, #13142, #52731, .T. ) ; +#8493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8494 = VERTEX_POINT ( 'NONE', #51185 ) ; +#8495 = ADVANCED_FACE ( 'NONE', ( #5454 ), #20056, .F. ) ; +#8496 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 70.16749699759739700, -28.20555803803047800 ) ) ; +#8497 = CARTESIAN_POINT ( 'NONE', ( -19.09195979516170300, 1.816080409676362100, -24.48497144683608100 ) ) ; +#8498 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820194200, 10.01741414369119800, -28.27509349209128300 ) ) ; +#8499 = EDGE_CURVE ( 'NONE', #54615, #13752, #36570, .T. ) ; +#8500 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 27.16666666666667500, -6.205558038030004800 ) ) ; +#8501 = EDGE_CURVE ( 'NONE', #79130, #16929, #71647, .T. ) ; +#8502 = FACE_OUTER_BOUND ( 'NONE', #41058, .T. ) ; +#8503 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873323700, 81.70803673496115500, -28.29033182162437400 ) ) ; +#8504 = ORIENTED_EDGE ( 'NONE', *, *, #25826, .T. ) ; +#8505 = CARTESIAN_POINT ( 'NONE', ( 9.438065798940094500, 18.11613388835882800, -28.57723500840122100 ) ) ; +#8506 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205787400, 51.51754275546334600, -28.27504145778831600 ) ) ; +#8507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5751, #43001, #49491, #12297 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674116562500E-007, 0.0007987728781051934900 ), + .UNSPECIFIED. ) ; +#8508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8509 = ORIENTED_EDGE ( 'NONE', *, *, #60393, .T. ) ; +#8510 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8513 = ADVANCED_FACE ( 'NONE', ( #55071 ), #38254, .T. ) ; +#8514 = CONICAL_SURFACE ( 'NONE', #40424, 10.00000000000009200, 0.7853981633974447300 ) ; +#8515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8516 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#8517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#8518 = AXIS2_PLACEMENT_3D ( 'NONE', #59022, #45952, #71541 ) ; +#8519 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120824500, 9.719011094518474900, -28.33427604305563800 ) ) ; +#8520 = EDGE_CURVE ( 'NONE', #13305, #45954, #23854, .T. ) ; +#8521 = EDGE_CURVE ( 'NONE', #15003, #24204, #9357, .T. ) ; +#8522 = ORIENTED_EDGE ( 'NONE', *, *, #17833, .F. ) ; +#8524 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19795, #13556, #50760, #63333 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.040978635838234000E-016, 0.001246264537621173500 ), + .UNSPECIFIED. ) ; +#8523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8525 = EDGE_CURVE ( 'NONE', #72677, #1793, #75671, .T. ) ; +#8526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8527 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8528 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 60.16054007504464400, -28.34042301926880500 ) ) ; +#8529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8531 = AXIS2_PLACEMENT_3D ( 'NONE', #60617, #23345, #29628 ) ; +#8532 = CIRCLE ( 'NONE', #14045, 10.50000000000022600 ) ; +#8533 = ORIENTED_EDGE ( 'NONE', *, *, #15708, .F. ) ; +#8534 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8535 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046900, 70.36203212531218300, -28.38801640354843100 ) ) ; +#8536 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 80.16749699759736800, -28.20555803803047800 ) ) ; +#8537 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.62753447840815100, -28.38801640354867200 ) ) ; +#8538 = ORIENTED_EDGE ( 'NONE', *, *, #12836, .F. ) ; +#8539 = AXIS2_PLACEMENT_3D ( 'NONE', #72331, #35074, #78586 ) ; +#8540 = CARTESIAN_POINT ( 'NONE', ( -4.048101427190040600, 93.52999794783627900, -28.52121714037359400 ) ) ; +#8541 = AXIS2_PLACEMENT_3D ( 'NONE', #61335, #80072, #17795 ) ; +#8542 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#8543 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8544 = AXIS2_PLACEMENT_3D ( 'NONE', #38463, #1225, #44700 ) ; +#8545 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#8546 = CARTESIAN_POINT ( 'NONE', ( -17.32922790642991400, 71.13127791441742400, -28.43092544535692000 ) ) ; +#8547 = FACE_OUTER_BOUND ( 'NONE', #49647, .T. ) ; +#8548 = CIRCLE ( 'NONE', #56335, 9.500000000000099500 ) ; +#8549 = ORIENTED_EDGE ( 'NONE', *, *, #1842, .F. ) ; +#8550 = ORIENTED_EDGE ( 'NONE', *, *, #35699, .T. ) ; +#8551 = ORIENTED_EDGE ( 'NONE', *, *, #56037, .T. ) ; +#8552 = ORIENTED_EDGE ( 'NONE', *, *, #48882, .T. ) ; +#8553 = ORIENTED_EDGE ( 'NONE', *, *, #29303, .T. ) ; +#8554 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 70.83333333333328600, -3.349151577478984600 ) ) ; +#8555 = AXIS2_PLACEMENT_3D ( 'NONE', #78334, #41317, #28876 ) ; +#8556 = ORIENTED_EDGE ( 'NONE', *, *, #64926, .T. ) ; +#8557 = EDGE_CURVE ( 'NONE', #34605, #11270, #61255, .T. ) ; +#8558 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58405, #52102, #70896, #33646 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867055673000E-007, 0.001076778502991269500 ), + .UNSPECIFIED. ) ; +#8559 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#8560 = VERTEX_POINT ( 'NONE', #53101 ) ; +#8561 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511819400, 79.60439022488354500, -28.70555803803030800 ) ) ; +#8562 = FACE_OUTER_BOUND ( 'NONE', #2289, .T. ) ; +#8563 = ORIENTED_EDGE ( 'NONE', *, *, #46773, .T. ) ; +#8564 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.66749699759768800, -28.20555803802994200 ) ) ; +#8565 = EDGE_CURVE ( 'NONE', #60436, #43735, #46733, .T. ) ; +#8566 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#8567 = VERTEX_POINT ( 'NONE', #22118 ) ; +#8568 = AXIS2_PLACEMENT_3D ( 'NONE', #9134, #52672, #15429 ) ; +#8569 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957540100, 17.00972971738994100, -28.70555803802993100 ) ) ; +#8570 = CIRCLE ( 'NONE', #34971, 10.50000000000009200 ) ; +#8571 = ADVANCED_FACE ( 'NONE', ( #34660 ), #1532, .F. ) ; +#8572 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567180300, 9.746602415621831400, -28.20555803802992800 ) ) ; +#8574 = ORIENTED_EDGE ( 'NONE', *, *, #14911, .F. ) ; +#8573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8575 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484955900, 59.28967419478918500, -28.59353418718928100 ) ) ; +#8576 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498700, 80.16054007504416700, -28.34042301926922400 ) ) ; +#8577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8578 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 42.16666666666666400, -4.152999154772358800 ) ) ; +#8579 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#8580 = AXIS2_PLACEMENT_3D ( 'NONE', #14622, #58129, #20883 ) ; +#8581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8582 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#8583 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428100, 33.17681279774500100, -28.70555803802996700 ) ) ; +#8584 = CIRCLE ( 'NONE', #50972, 10.50000000000009600 ) ; +#8585 = ORIENTED_EDGE ( 'NONE', *, *, #11780, .F. ) ; +#8586 = ADVANCED_FACE ( 'NONE', ( #69676 ), #49199, .T. ) ; +#8587 = CARTESIAN_POINT ( 'NONE', ( -12.88374526358323500, 24.54999999999998600, -28.53994725305375000 ) ) ; +#8588 = VERTEX_POINT ( 'NONE', #16129 ) ; +#8589 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865854900, 41.18727262089430500, -28.28853693900643100 ) ) ; +#8590 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 101.5999999999999900, -18.70555803803001300 ) ) ; +#8591 = ADVANCED_FACE ( 'NONE', ( #32683 ), #16152, .F. ) ; +#8592 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73171, #48364, #67165, #29947 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.359479019930958000E-017, 0.001246264537621174800 ), + .UNSPECIFIED. ) ; +#8593 = AXIS2_PLACEMENT_3D ( 'NONE', #66600, #72858, #23085 ) ; +#8594 = ADVANCED_FACE ( 'NONE', ( #18089 ), #63844, .T. ) ; +#8595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8596 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.22294471194861400, -28.20555803802997700 ) ) ; +#8597 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#8598 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 17.97246552159110100, -28.38801640354855800 ) ) ; +#8599 = EDGE_CURVE ( 'NONE', #70154, #58909, #32308, .T. ) ; +#8600 = FACE_OUTER_BOUND ( 'NONE', #52679, .T. ) ; +#8601 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 4.500000000000014200, 4.650848422521016300 ) ) ; +#8602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8604 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8605 = CONICAL_SURFACE ( 'NONE', #35417, 10.50000000000009600, 0.7853981633974518300 ) ; +#8606 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24543, #37025, #6042, #49511 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081906068400E-007, 0.001119323292485691700 ), + .UNSPECIFIED. ) ; +#8607 = EDGE_LOOP ( 'NONE', ( #75255, #64326, #78520 ) ) ; +#8608 = ORIENTED_EDGE ( 'NONE', *, *, #55210, .T. ) ; +#8609 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#8610 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537338500, 61.25732391202388500, -28.20555803803014400 ) ) ; +#8611 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 80.34267608797600200, -28.20555803802997700 ) ) ; +#8612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8613 = FACE_OUTER_BOUND ( 'NONE', #29935, .T. ) ; +#8614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8615 = VERTEX_POINT ( 'NONE', #66185 ) ; +#8616 = CONICAL_SURFACE ( 'NONE', #19294, 10.00000000000009200, 0.7853981633974447300 ) ; +#8617 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8618 = EDGE_LOOP ( 'NONE', ( #79569, #34509, #34002, #48491 ) ) ; +#8619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8620 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725289700, 24.55000000000000100, -28.20555803802994200 ) ) ; +#8622 = EDGE_CURVE ( 'NONE', #61057, #4132, #67737, .T. ) ; +#8621 = ORIENTED_EDGE ( 'NONE', *, *, #8037, .F. ) ; +#8623 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.43250300240228500, -28.20555803802997700 ) ) ; +#8624 = EDGE_CURVE ( 'NONE', #3701, #21156, #80373, .T. ) ; +#8625 = ORIENTED_EDGE ( 'NONE', *, *, #38650, .T. ) ; +#8626 = FACE_OUTER_BOUND ( 'NONE', #68152, .T. ) ; +#8627 = ORIENTED_EDGE ( 'NONE', *, *, #78141, .T. ) ; +#8628 = ORIENTED_EDGE ( 'NONE', *, *, #6961, .T. ) ; +#8629 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 86.12096679557744500, -28.36604143581870500 ) ) ; +#8630 = ORIENTED_EDGE ( 'NONE', *, *, #30701, .F. ) ; +#8631 = ORIENTED_EDGE ( 'NONE', *, *, #46200, .T. ) ; +#8632 = CARTESIAN_POINT ( 'NONE', ( -16.45764012468389800, 75.17573043145937100, -28.60339038649757300 ) ) ; +#8633 = ORIENTED_EDGE ( 'NONE', *, *, #9487, .T. ) ; +#8634 = ORIENTED_EDGE ( 'NONE', *, *, #77400, .T. ) ; +#8635 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8636 = ORIENTED_EDGE ( 'NONE', *, *, #8013, .T. ) ; +#8637 = EDGE_CURVE ( 'NONE', #32523, #48875, #3474, .T. ) ; +#8638 = EDGE_CURVE ( 'NONE', #34215, #47573, #51129, .T. ) ; +#8639 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#8640 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60742, #17215, #29756, #73245 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736098730900E-007, 0.0002592140922084839700 ), + .UNSPECIFIED. ) ; +#8641 = EDGE_CURVE ( 'NONE', #41110, #63819, #17855, .T. ) ; +#8642 = CONICAL_SURFACE ( 'NONE', #54751, 10.50000000000009900, 0.7853981633974518300 ) ; +#8643 = AXIS2_PLACEMENT_3D ( 'NONE', #55612, #18370, #61906 ) ; +#8645 = ORIENTED_EDGE ( 'NONE', *, *, #44359, .T. ) ; +#8644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8646 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8647 = ORIENTED_EDGE ( 'NONE', *, *, #18905, .T. ) ; +#8648 = ORIENTED_EDGE ( 'NONE', *, *, #7234, .F. ) ; +#8649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8650 = CIRCLE ( 'NONE', #66189, 10.50000000000009600 ) ; +#8651 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 48.16666666666667900, 3.794441961969996900 ) ) ; +#8652 = AXIS2_PLACEMENT_3D ( 'NONE', #25980, #56969, #63241 ) ; +#8654 = ORIENTED_EDGE ( 'NONE', *, *, #30731, .T. ) ; +#8653 = AXIS2_PLACEMENT_3D ( 'NONE', #3420, #53485, #16228 ) ; +#8655 = CARTESIAN_POINT ( 'NONE', ( -16.63397712344654200, 50.62657292525587100, -28.57116085698358900 ) ) ; +#8656 = ORIENTED_EDGE ( 'NONE', *, *, #68208, .T. ) ; +#8657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53115, #9607, #22127, #65665 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169426100, 0.001302223101367931300 ), + .UNSPECIFIED. ) ; +#8658 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 13.16666666666667700, 6.794441961969992500 ) ) ; +#8659 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820188100, 71.51741414369117000, -28.27509349209130100 ) ) ; +#8660 = FACE_OUTER_BOUND ( 'NONE', #63227, .T. ) ; +#8661 = ORIENTED_EDGE ( 'NONE', *, *, #5303, .F. ) ; +#8662 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#8663 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 50.50000000000002100, -9.258116921287651700 ) ) ; +#8664 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#8665 = EDGE_LOOP ( 'NONE', ( #14287, #50064, #33496 ) ) ; +#8666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8667 = AXIS2_PLACEMENT_3D ( 'NONE', #77276, #40015, #2720 ) ; +#8668 = EDGE_CURVE ( 'NONE', #36682, #59983, #65797, .T. ) ; +#8669 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614878800, 28.49322649091148200, -28.30799595738888600 ) ) ; +#8670 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999706900, 83.65857157145697400, -28.20555803803030800 ) ) ; +#8671 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571423100, 77.92318720225442500, -28.70555803803047500 ) ) ; +#8672 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948470300, 61.01872124563878000, -28.53757464917607900 ) ) ; +#8673 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477648800, 90.38589569235173800, -28.27354076558380300 ) ) ; +#8674 = CARTESIAN_POINT ( 'NONE', ( -15.24268566510272300, 9.878657167448636800, -28.70261278770272600 ) ) ; +#8675 = FACE_OUTER_BOUND ( 'NONE', #70553, .T. ) ; +#8676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8677 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465467000, 18.99920551340383700, -28.70555803803009500 ) ) ; +#8678 = EDGE_CURVE ( 'NONE', #36405, #26983, #30757, .T. ) ; +#8679 = FACE_OUTER_BOUND ( 'NONE', #46002, .T. ) ; +#8680 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999972900, 90.16749699759753900, -28.20555803803014400 ) ) ; +#8681 = EDGE_LOOP ( 'NONE', ( #30994, #6913, #77160, #69865 ) ) ; +#8682 = AXIS2_PLACEMENT_3D ( 'NONE', #1845, #45345, #8096 ) ; +#8683 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54747, #11267, #23773, #67281 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.699674944388147800E-017, 0.001179148174662955800 ), + .UNSPECIFIED. ) ; +#8684 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187775700, 71.60186521182760100, -28.24089224568519900 ) ) ; +#8685 = ADVANCED_FACE ( 'NONE', ( #22000 ), #12256, .T. ) ; +#8686 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000035100, 90.69949493661177100, -28.70555803802997700 ) ) ; +#8687 = CARTESIAN_POINT ( 'NONE', ( 13.14485503148529800, 50.55000000000001100, -28.46601488343427300 ) ) ; +#8688 = ORIENTED_EDGE ( 'NONE', *, *, #23963, .F. ) ; +#8689 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.94142842854297000, -28.20555803802997700 ) ) ; +#8690 = ADVANCED_FACE ( 'NONE', ( #78448 ), #14199, .T. ) ; +#8691 = CONICAL_SURFACE ( 'NONE', #14377, 10.50000000000009600, 0.7853981633974500600 ) ; +#8692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8693 = EDGE_LOOP ( 'NONE', ( #61198, #66398, #79774, #7273 ) ) ; +#8694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8695 = FACE_OUTER_BOUND ( 'NONE', #2845, .T. ) ; +#8696 = AXIS2_PLACEMENT_3D ( 'NONE', #52289, #21073, #8783 ) ; +#8697 = EDGE_LOOP ( 'NONE', ( #79943, #52603, #40643, #61797 ) ) ; +#8698 = ORIENTED_EDGE ( 'NONE', *, *, #42335, .T. ) ; +#8699 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.00000000000000700, -1.205558038030005300 ) ) ; +#8700 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8701 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8702 = CONICAL_SURFACE ( 'NONE', #50091, 10.00000000000009400, 0.7853981633974447300 ) ; +#8703 = ORIENTED_EDGE ( 'NONE', *, *, #14139, .F. ) ; +#8704 = ORIENTED_EDGE ( 'NONE', *, *, #73596, .F. ) ; +#8705 = ORIENTED_EDGE ( 'NONE', *, *, #68599, .T. ) ; +#8706 = ORIENTED_EDGE ( 'NONE', *, *, #5190, .T. ) ; +#8707 = ORIENTED_EDGE ( 'NONE', *, *, #13787, .F. ) ; +#8708 = ORIENTED_EDGE ( 'NONE', *, *, #25828, .F. ) ; +#8709 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387461200, 56.46717019299482800, -28.53914313452773000 ) ) ; +#8710 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 59.41684396980716800, -28.70555803802999500 ) ) ; +#8711 = AXIS2_PLACEMENT_3D ( 'NONE', #58831, #21600, #65126 ) ; +#8712 = ORIENTED_EDGE ( 'NONE', *, *, #60618, .T. ) ; +#8713 = CARTESIAN_POINT ( 'NONE', ( 12.10011726479569200, 45.54999999999999700, -28.53808257741934200 ) ) ; +#8714 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8715 = ADVANCED_FACE ( 'NONE', ( #61895 ), #26840, .T. ) ; +#8716 = EDGE_LOOP ( 'NONE', ( #23560, #30667, #73226 ) ) ; +#8717 = CONICAL_SURFACE ( 'NONE', #30258, 10.00000000000009200, 0.7853981633974447300 ) ; +#8718 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949247500, 38.57379779496241000, -28.70555803802995200 ) ) ; +#8719 = VERTEX_POINT ( 'NONE', #60999 ) ; +#8720 = ORIENTED_EDGE ( 'NONE', *, *, #65246, .F. ) ; +#8721 = EDGE_LOOP ( 'NONE', ( #57835, #74348, #54611 ) ) ; +#8722 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 79.77559325427182600, -28.45987523529581900 ) ) ; +#8723 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#8724 = FACE_OUTER_BOUND ( 'NONE', #2210, .T. ) ; +#8725 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 19.16666666666666400, 0.9380355014189834000 ) ) ; +#8726 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455911800, 90.07527064970101100, -28.39317435246135400 ) ) ; +#8727 = ORIENTED_EDGE ( 'NONE', *, *, #7218, .F. ) ; +#8728 = CARTESIAN_POINT ( 'NONE', ( -16.53469939396896000, 9.232650303015518000, -28.58709120703527900 ) ) ; +#8729 = ORIENTED_EDGE ( 'NONE', *, *, #4720, .F. ) ; +#8730 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41752, #54267, #17035, #60554 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487555964300, 0.001085359101287689300 ), + .UNSPECIFIED. ) ; +#8731 = CONICAL_SURFACE ( 'NONE', #72840, 10.50000000000009400, 0.7853981633974500600 ) ; +#8733 = EDGE_LOOP ( 'NONE', ( #24443, #25049, #44276, #44216 ) ) ; +#8732 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#8734 = EDGE_CURVE ( 'NONE', #65707, #33380, #43354, .T. ) ; +#8735 = EDGE_LOOP ( 'NONE', ( #65791, #22891, #47325, #49526 ) ) ; +#8736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8738 = EDGE_CURVE ( 'NONE', #59504, #25521, #45276, .T. ) ; +#8739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8740 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8742 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 62.66666666666667900, -8.133761268305512700 ) ) ; +#8743 = EDGE_CURVE ( 'NONE', #4256, #42498, #3367, .T. ) ; +#8744 = AXIS2_PLACEMENT_3D ( 'NONE', #78380, #59609, #47312 ) ; +#8745 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618500, 70.79999999999967000, -28.55171188418405800 ) ) ; +#8746 = CARTESIAN_POINT ( 'NONE', ( -17.24641253273707900, 8.531558652466401300, -28.44963905422429900 ) ) ; +#8747 = CONICAL_SURFACE ( 'NONE', #44260, 10.50000000000009600, 0.7853981633974500600 ) ; +#8748 = CARTESIAN_POINT ( 'NONE', ( -2.198586935028918400, 94.72249899919880500, -28.20555803803014400 ) ) ; +#8749 = ORIENTED_EDGE ( 'NONE', *, *, #66429, .T. ) ; +#8750 = ORIENTED_EDGE ( 'NONE', *, *, #54748, .T. ) ; +#8751 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#8752 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.43250300240230600, -28.20555803802997700 ) ) ; +#8753 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8754 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.49747404049738000, -28.26641963845862500 ) ) ; +#8755 = AXIS2_PLACEMENT_3D ( 'NONE', #52571, #77612, #40338 ) ; +#8756 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8757 = EDGE_CURVE ( 'NONE', #21357, #4061, #69695, .T. ) ; +#8758 = EDGE_CURVE ( 'NONE', #28717, #47710, #59952, .T. ) ; +#8759 = ADVANCED_FACE ( 'NONE', ( #28837 ), #24886, .F. ) ; +#8760 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180450100, 61.65075715145295000, -28.20555803802997700 ) ) ; +#8761 = AXIS2_PLACEMENT_3D ( 'NONE', #26679, #32900, #63950 ) ; +#8762 = CIRCLE ( 'NONE', #27382, 10.00000000000009400 ) ; +#8763 = EDGE_LOOP ( 'NONE', ( #33381, #9314, #68453, #54640 ) ) ; +#8764 = CARTESIAN_POINT ( 'NONE', ( -20.02428459401313500, 7.487857702992716500, -27.37358685260377200 ) ) ; +#8765 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8766 = ORIENTED_EDGE ( 'NONE', *, *, #25197, .F. ) ; +#8767 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 25.00000000000002100, 3.794441961969998300 ) ) ; +#8768 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#8769 = FACE_OUTER_BOUND ( 'NONE', #61844, .T. ) ; +#8770 = ORIENTED_EDGE ( 'NONE', *, *, #8988, .F. ) ; +#8771 = AXIS2_PLACEMENT_3D ( 'NONE', #56267, #62551, #25299 ) ; +#8772 = VERTEX_POINT ( 'NONE', #80280 ) ; +#8773 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27908, #34129, #52866, #15635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735902906400E-007, 0.0009376786059871999300 ), + .UNSPECIFIED. ) ; +#8774 = EDGE_LOOP ( 'NONE', ( #36747, #50965, #30991 ) ) ; +#8775 = ORIENTED_EDGE ( 'NONE', *, *, #42479, .T. ) ; +#8777 = ORIENTED_EDGE ( 'NONE', *, *, #73118, .T. ) ; +#8776 = EDGE_CURVE ( 'NONE', #53776, #71807, #57974, .T. ) ; +#8778 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714276700, 43.67681279774500800, -28.70555803802997700 ) ) ; +#8779 = ADVANCED_FACE ( 'NONE', ( #41428 ), #56012, .F. ) ; +#8780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8781 = AXIS2_PLACEMENT_3D ( 'NONE', #68504, #31255, #74761 ) ; +#8782 = AXIS2_PLACEMENT_3D ( 'NONE', #14598, #58112, #20865 ) ; +#8783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8785 = CARTESIAN_POINT ( 'NONE', ( -10.75693756550919700, 51.43482212736793700, -28.29548618595819700 ) ) ; +#8786 = PLANE ( 'NONE', #57194 ) ; +#8787 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#8788 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310471800, 49.60230989102910100, -28.61774594594331600 ) ) ; +#8789 = FACE_OUTER_BOUND ( 'NONE', #68467, .T. ) ; +#8790 = ORIENTED_EDGE ( 'NONE', *, *, #31424, .T. ) ; +#8791 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537338500, 61.25732391202388500, -28.20555803803014400 ) ) ; +#8792 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8793 = ORIENTED_EDGE ( 'NONE', *, *, #44451, .T. ) ; +#8794 = ORIENTED_EDGE ( 'NONE', *, *, #57515, .T. ) ; +#8795 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#8796 = ORIENTED_EDGE ( 'NONE', *, *, #22105, .T. ) ; +#8797 = ORIENTED_EDGE ( 'NONE', *, *, #35415, .F. ) ; +#8798 = AXIS2_PLACEMENT_3D ( 'NONE', #38683, #1441, #44927 ) ; +#8799 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#8800 = FACE_OUTER_BOUND ( 'NONE', #75774, .T. ) ; +#8801 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8802 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8803 = ORIENTED_EDGE ( 'NONE', *, *, #53455, .F. ) ; +#8804 = ADVANCED_FACE ( 'NONE', ( #74530 ), #22937, .T. ) ; +#8805 = ORIENTED_EDGE ( 'NONE', *, *, #39114, .F. ) ; +#8806 = AXIS2_PLACEMENT_3D ( 'NONE', #4584, #23370, #54347 ) ; +#8807 = FACE_OUTER_BOUND ( 'NONE', #45273, .T. ) ; +#8808 = ORIENTED_EDGE ( 'NONE', *, *, #35129, .F. ) ; +#8809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8810 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 68.66666666666668600, 2.794441961969992100 ) ) ; +#8811 = AXIS2_PLACEMENT_3D ( 'NONE', #74593, #37287, #33 ) ; +#8812 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#8813 = CARTESIAN_POINT ( 'NONE', ( 7.912336778710827800E-015, 26.67143691309408400, -28.36981695106777200 ) ) ; +#8814 = EDGE_CURVE ( 'NONE', #80010, #3260, #47246, .T. ) ; +#8815 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8816 = AXIS2_PLACEMENT_3D ( 'NONE', #44670, #7443, #50942 ) ; +#8817 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051543400, 60.58127875436078100, -28.53757464917570600 ) ) ; +#8818 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63521, #69745, #44947, #7716 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780706668100E-007, 0.0002745453538439336500 ), + .UNSPECIFIED. ) ; +#8819 = ORIENTED_EDGE ( 'NONE', *, *, #63885, .T. ) ; +#8820 = ORIENTED_EDGE ( 'NONE', *, *, #70745, .F. ) ; +#8821 = CARTESIAN_POINT ( 'NONE', ( -9.254657264815449500, 31.00380841767820400, -28.64142799534455000 ) ) ; +#8822 = ORIENTED_EDGE ( 'NONE', *, *, #34507, .T. ) ; +#8823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11531, #48738, #61315, #24033 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001137779926879155200, 0.0003808516268248926900 ), + .UNSPECIFIED. ) ; +#8824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8825 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 85.67652461702002100, -28.70555803802997700 ) ) ; +#8826 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8827 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000464100, 90.52242369685791300, -28.53861367218606700 ) ) ; +#8828 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 40.00000000000000000, -1.205558038030002800 ) ) ; +#8829 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24520, #61792, #30784, #74308 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.015671108585858100E-017, 0.001179148174663057100 ), + .UNSPECIFIED. ) ; +#8830 = FACE_OUTER_BOUND ( 'NONE', #60349, .T. ) ; +#8831 = ORIENTED_EDGE ( 'NONE', *, *, #17373, .F. ) ; +#8832 = EDGE_LOOP ( 'NONE', ( #73827, #13663, #39596, #77111, #44568, #26101, #80418 ) ) ; +#8833 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#8834 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#8835 = EDGE_CURVE ( 'NONE', #75531, #8099, #72592, .T. ) ; +#8836 = CARTESIAN_POINT ( 'NONE', ( 17.03295546792569200, 53.19758746877415900, -28.49829281932967000 ) ) ; +#8837 = ORIENTED_EDGE ( 'NONE', *, *, #34878, .T. ) ; +#8838 = CONICAL_SURFACE ( 'NONE', #26099, 10.00000000000009200, 0.7853981633974447300 ) ; +#8839 = EDGE_CURVE ( 'NONE', #65169, #39199, #55216, .T. ) ; +#8840 = ORIENTED_EDGE ( 'NONE', *, *, #17720, .F. ) ; +#8841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8842 = ORIENTED_EDGE ( 'NONE', *, *, #46614, .F. ) ; +#8843 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#8844 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#8845 = ORIENTED_EDGE ( 'NONE', *, *, #59453, .F. ) ; +#8846 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8847 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#8848 = VERTEX_POINT ( 'NONE', #37268 ) ; +#8849 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1530, #26592, #45275, #8040 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964142900, 0.0005839769583123682000 ), + .UNSPECIFIED. ) ; +#8850 = CIRCLE ( 'NONE', #37976, 10.00000000000009400 ) ; +#8851 = EDGE_CURVE ( 'NONE', #24389, #67972, #40767, .T. ) ; +#8852 = ADVANCED_FACE ( 'NONE', ( #39465 ), #54063, .T. ) ; +#8853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8854 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8855 = EDGE_CURVE ( 'NONE', #15598, #10618, #70602, .T. ) ; +#8857 = ORIENTED_EDGE ( 'NONE', *, *, #65877, .T. ) ; +#8856 = AXIS2_PLACEMENT_3D ( 'NONE', #30343, #73831, #36542 ) ; +#8858 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#8859 = FACE_OUTER_BOUND ( 'NONE', #48645, .T. ) ; +#8860 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#8861 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 2.333333333333340100, -5.205558038030008400 ) ) ; +#8862 = ORIENTED_EDGE ( 'NONE', *, *, #41881, .F. ) ; +#8863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8864 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#8865 = ORIENTED_EDGE ( 'NONE', *, *, #75124, .F. ) ; +#8866 = ORIENTED_EDGE ( 'NONE', *, *, #20814, .T. ) ; +#8867 = ORIENTED_EDGE ( 'NONE', *, *, #27754, .F. ) ; +#8868 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8869 = FACE_OUTER_BOUND ( 'NONE', #23720, .T. ) ; +#8870 = ADVANCED_FACE ( 'NONE', ( #6379 ), #52075, .T. ) ; +#8871 = AXIS2_PLACEMENT_3D ( 'NONE', #51476, #14262, #57773 ) ; +#8872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8873 = EDGE_CURVE ( 'NONE', #74769, #80595, #68664, .T. ) ; +#8874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56271, #31282, #68800, #75065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904300907600E-007, 0.0005865296644889270100 ), + .UNSPECIFIED. ) ; +#8875 = EDGE_CURVE ( 'NONE', #57598, #29509, #26353, .T. ) ; +#8876 = CARTESIAN_POINT ( 'NONE', ( -10.53518765398293600, 9.406791769321971600, -28.68794773163825000 ) ) ; +#8877 = EDGE_CURVE ( 'NONE', #32995, #72320, #11872, .T. ) ; +#8878 = ORIENTED_EDGE ( 'NONE', *, *, #65174, .F. ) ; +#8879 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 56.12096679557745200, -28.36604143581870500 ) ) ; +#8880 = CARTESIAN_POINT ( 'NONE', ( 15.11625473641676700, 35.04999999999997600, -28.53994725305375700 ) ) ; +#8881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8882 = AXIS2_PLACEMENT_3D ( 'NONE', #27885, #71374, #34109 ) ; +#8883 = CIRCLE ( 'NONE', #61308, 10.00000000000009200 ) ; +#8885 = EDGE_LOOP ( 'NONE', ( #24559, #52170, #56664, #32319 ) ) ; +#8884 = ADVANCED_FACE ( 'NONE', ( #8306 ), #2461, .T. ) ; +#8886 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004900, 41.43250300240230600, -28.20555803802997700 ) ) ; +#8887 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#8888 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654557500, 81.32559822014181300, -28.29986836858018500 ) ) ; +#8889 = EDGE_CURVE ( 'NONE', #23839, #33070, #19017, .T. ) ; +#8890 = CARTESIAN_POINT ( 'NONE', ( 17.37150777124376000, 51.43250300240198700, -28.25053031809500200 ) ) ; +#8891 = AXIS2_PLACEMENT_3D ( 'NONE', #23343, #29627, #17092 ) ; +#8892 = AXIS2_PLACEMENT_3D ( 'NONE', #8049, #51557, #14335 ) ; +#8893 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701800, 23.61903418172678900, -28.69431509262337700 ) ) ; +#8894 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8896 = CARTESIAN_POINT ( 'NONE', ( 10.37141821671398600, 80.16749699759735400, -28.25056166218041300 ) ) ; +#8897 = ADVANCED_FACE ( 'NONE', ( #21006 ), #31861, .T. ) ; +#8898 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#8899 = CARTESIAN_POINT ( 'NONE', ( -11.74546181355821300, 39.09617548195245000, -28.64146967277533000 ) ) ; +#8900 = CARTESIAN_POINT ( 'NONE', ( -3.488278476062336400, 9.414547318481455200, -28.68840635393010500 ) ) ; +#8901 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 11.66666666666668700, 8.320721403598824400 ) ) ; +#8902 = ORIENTED_EDGE ( 'NONE', *, *, #12392, .F. ) ; +#8903 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571893300, 90.07141756547885300, -28.70555803803014400 ) ) ; +#8904 = ORIENTED_EDGE ( 'NONE', *, *, #50257, .T. ) ; +#8905 = ADVANCED_FACE ( 'NONE', ( #4430 ), #17093, .F. ) ; +#8906 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 46.00000000000000700, -6.205558038030003100 ) ) ; +#8907 = AXIS2_PLACEMENT_3D ( 'NONE', #40170, #2904, #46393 ) ; +#8908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8909 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 11.00000000000001100, -9.205558038030005700 ) ) ; +#8910 = CIRCLE ( 'NONE', #28379, 10.50000000000009600 ) ; +#8911 = AXIS2_PLACEMENT_3D ( 'NONE', #27519, #2447, #64787 ) ; +#8912 = VERTEX_POINT ( 'NONE', #38332 ) ; +#8913 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8914 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8915 = ORIENTED_EDGE ( 'NONE', *, *, #66395, .T. ) ; +#8916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8917 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465695900, 70.65007990305426200, -28.43638873268704300 ) ) ; +#8918 = FACE_OUTER_BOUND ( 'NONE', #36133, .T. ) ; +#8919 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 48.33333333333333600, 8.320721403598817300 ) ) ; +#8920 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803803001300 ) ) ; +#8921 = VERTEX_POINT ( 'NONE', #44550 ) ; +#8922 = AXIS2_PLACEMENT_3D ( 'NONE', #16574, #66609, #29388 ) ; +#8923 = ORIENTED_EDGE ( 'NONE', *, *, #26056, .T. ) ; +#8924 = EDGE_LOOP ( 'NONE', ( #76046, #72909, #16982 ) ) ; +#8925 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8926 = AXIS2_PLACEMENT_3D ( 'NONE', #75197, #37914, #655 ) ; +#8927 = FACE_OUTER_BOUND ( 'NONE', #31393, .T. ) ; +#8928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8929 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 71.08083798124329200, -28.45106778992437700 ) ) ; +#8930 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707777000, 89.93589406416698800, -28.68054222049973800 ) ) ; +#8931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17364, #54618, #67142, #29918 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401252100, 0.004682530427070979100 ), + .UNSPECIFIED. ) ; +#8932 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462636000, 61.39409401757614400, -28.39369363572345500 ) ) ; +#8933 = ORIENTED_EDGE ( 'NONE', *, *, #59280, .T. ) ; +#8934 = ORIENTED_EDGE ( 'NONE', *, *, #18561, .F. ) ; +#8935 = CONICAL_SURFACE ( 'NONE', #69174, 10.00000000000009200, 0.7853981633974447300 ) ; +#8936 = AXIS2_PLACEMENT_3D ( 'NONE', #62094, #24822, #68324 ) ; +#8937 = ORIENTED_EDGE ( 'NONE', *, *, #37590, .T. ) ; +#8938 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451024800, 18.15930907398604800, -28.35186440610868200 ) ) ; +#8939 = CARTESIAN_POINT ( 'NONE', ( -11.95723973586455600, 85.79999999999998300, -28.53819074160683700 ) ) ; +#8940 = ORIENTED_EDGE ( 'NONE', *, *, #4628, .F. ) ; +#8941 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8942 = VERTEX_POINT ( 'NONE', #7334 ) ; +#8943 = EDGE_LOOP ( 'NONE', ( #8236, #11019, #75181, #4399 ) ) ; +#8944 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120823100, 60.38098890548146600, -28.33427604305564500 ) ) ; +#8945 = CONICAL_SURFACE ( 'NONE', #77834, 10.00000000000009200, 0.7853981633974415100 ) ; +#8946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8947 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#8948 = VERTEX_POINT ( 'NONE', #50835 ) ; +#8949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8951 = FACE_OUTER_BOUND ( 'NONE', #10205, .T. ) ; +#8952 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155506100, 75.79999999999967000, -28.20555803803030800 ) ) ; +#8953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63979, #20438, #76443, #39172 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999358032300E-007, 0.0006654947828621693900 ), + .UNSPECIFIED. ) ; +#8954 = ORIENTED_EDGE ( 'NONE', *, *, #26036, .F. ) ; +#8955 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820192400, 20.51741414369119500, -28.27509349209129000 ) ) ; +#8956 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495027400, 28.19228657120674000, -28.53891855579987400 ) ) ; +#8957 = EDGE_CURVE ( 'NONE', #44206, #36688, #10296, .T. ) ; +#8958 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 51.83333333333330700, -3.349151577478984600 ) ) ; +#8959 = CONICAL_SURFACE ( 'NONE', #15881, 10.50000000000009600, 0.7853981633974518300 ) ; +#8960 = ORIENTED_EDGE ( 'NONE', *, *, #62274, .T. ) ; +#8962 = EDGE_CURVE ( 'NONE', #73096, #12957, #33618, .T. ) ; +#8961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24729, #62014, #43474, #6233 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405670419589900E-007, 0.0007670610367937803500 ), + .UNSPECIFIED. ) ; +#8963 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8964 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#8965 = ADVANCED_FACE ( 'NONE', ( #50123 ), #64798, .T. ) ; +#8966 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448994900, 45.16666666666666400, 6.794441961969994300 ) ) ; +#8967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8969 = EDGE_CURVE ( 'NONE', #76860, #38695, #510, .T. ) ; +#8970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57926, #76407, #26935, #70415 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199195000, 0.006247607834321586300 ), + .UNSPECIFIED. ) ; +#8972 = EDGE_CURVE ( 'NONE', #893, #30084, #37496, .T. ) ; +#8973 = EDGE_CURVE ( 'NONE', #14526, #56579, #66734, .T. ) ; +#8974 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 47.16666666666667900, -9.205558038030003900 ) ) ; +#8975 = EDGE_CURVE ( 'NONE', #11944, #68176, #35592, .T. ) ; +#8976 = ADVANCED_FACE ( 'NONE', ( #48186 ), #14164, .T. ) ; +#8977 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8978 = ORIENTED_EDGE ( 'NONE', *, *, #59162, .F. ) ; +#8979 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528143800, 41.46868088498121800, -28.51286550264512700 ) ) ; +#8980 = ORIENTED_EDGE ( 'NONE', *, *, #7316, .T. ) ; +#8981 = ADVANCED_FACE ( 'NONE', ( #31681 ), #20684, .T. ) ; +#8982 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 17.00000000000000700, -1.205558038030005300 ) ) ; +#8983 = CARTESIAN_POINT ( 'NONE', ( 17.71847337278334700, 92.95923668639166200, -28.34927169292161500 ) ) ; +#8984 = AXIS2_PLACEMENT_3D ( 'NONE', #12680, #56153, #18902 ) ; +#8985 = EDGE_CURVE ( 'NONE', #65965, #38201, #15121, .T. ) ; +#8986 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310682100, 18.10230989102885200, -28.61774594594303500 ) ) ; +#8987 = EDGE_CURVE ( 'NONE', #30281, #54772, #62835, .T. ) ; +#8988 = EDGE_CURVE ( 'NONE', #24389, #46628, #46235, .T. ) ; +#8989 = ORIENTED_EDGE ( 'NONE', *, *, #28381, .F. ) ; +#8990 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274455300, 70.30622828441261200, -28.24172590004350500 ) ) ; +#8991 = ADVANCED_FACE ( 'NONE', ( #29764 ), #11246, .T. ) ; +#8992 = CONICAL_SURFACE ( 'NONE', #5335, 10.00000000000009200, 0.7853981633974447300 ) ; +#8993 = ORIENTED_EDGE ( 'NONE', *, *, #33136, .T. ) ; +#8994 = CONICAL_SURFACE ( 'NONE', #73290, 10.00000000000009200, 0.7853981633974447300 ) ; +#8995 = ORIENTED_EDGE ( 'NONE', *, *, #1253, .F. ) ; +#8996 = AXIS2_PLACEMENT_3D ( 'NONE', #52643, #15409, #58914 ) ; +#8997 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#8998 = ORIENTED_EDGE ( 'NONE', *, *, #61225, .T. ) ; +#8999 = CONICAL_SURFACE ( 'NONE', #43375, 10.00000000000009400, 0.7853981633974447300 ) ; +#9000 = ORIENTED_EDGE ( 'NONE', *, *, #76321, .T. ) ; +#9001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9002 = VERTEX_POINT ( 'NONE', #2423 ) ; +#9003 = AXIS2_PLACEMENT_3D ( 'NONE', #63752, #69958, #57471 ) ; +#9004 = ORIENTED_EDGE ( 'NONE', *, *, #69878, .T. ) ; +#9005 = AXIS2_PLACEMENT_3D ( 'NONE', #27444, #33666, #64709 ) ; +#9006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9007 = CONICAL_SURFACE ( 'NONE', #57193, 10.50000000000009600, 0.7853981633974500600 ) ; +#9008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9009 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6832, #44056, #69116, #31873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.009258394948636900E-018, 0.001246264537621183900 ), + .UNSPECIFIED. ) ; +#9010 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 72.18315603019281900, -28.70555803802999500 ) ) ; +#9011 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 60.50000000000001400, 4.650848422521016300 ) ) ; +#9012 = ORIENTED_EDGE ( 'NONE', *, *, #53075, .T. ) ; +#9013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9014 = CONICAL_SURFACE ( 'NONE', #52967, 10.50000000000009800, 0.7853981633974518300 ) ; +#9015 = ORIENTED_EDGE ( 'NONE', *, *, #62873, .T. ) ; +#9016 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175100, 70.46048989987122000, -28.36889022317246800 ) ) ; +#9017 = ORIENTED_EDGE ( 'NONE', *, *, #16295, .F. ) ; +#9018 = ORIENTED_EDGE ( 'NONE', *, *, #73291, .F. ) ; +#9019 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#9020 = CIRCLE ( 'NONE', #10048, 10.00000000000009200 ) ; +#9021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9022 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9023 = ORIENTED_EDGE ( 'NONE', *, *, #72194, .T. ) ; +#9024 = CARTESIAN_POINT ( 'NONE', ( 9.951898572809957600, 93.52999794783627900, -28.52121714037359400 ) ) ; +#9025 = FACE_OUTER_BOUND ( 'NONE', #57070, .T. ) ; +#9026 = AXIS2_PLACEMENT_3D ( 'NONE', #76022, #70026, #57533 ) ; +#9027 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841333000, 70.16349705304836000, -28.30782889147497600 ) ) ; +#9028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9029 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 79.98922577050341000, -28.37255355648634500 ) ) ; +#9030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9031 = EDGE_LOOP ( 'NONE', ( #35876, #75718, #34494, #55804, #1917 ) ) ; +#9032 = ORIENTED_EDGE ( 'NONE', *, *, #69311, .T. ) ; +#9033 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528127800, 9.968680884981225200, -28.51286550264509100 ) ) ; +#9034 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 22.83333333333334300, -6.205558038030004800 ) ) ; +#9035 = CIRCLE ( 'NONE', #74740, 10.00000000000009600 ) ; +#9036 = VERTEX_POINT ( 'NONE', #8674 ) ; +#9037 = EDGE_CURVE ( 'NONE', #23758, #47941, #13197, .T. ) ; +#9038 = CIRCLE ( 'NONE', #62310, 10.00000000000009200 ) ; +#9039 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#9040 = AXIS2_PLACEMENT_3D ( 'NONE', #74608, #24837, #24561 ) ; +#9041 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823699600, 31.90456253568397200, -28.61277292027075700 ) ) ; +#9042 = CARTESIAN_POINT ( 'NONE', ( 4.002024496668912700, 39.28907889423218300, -28.25433304472393600 ) ) ; +#9043 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 42.18315603019281200, -28.70555803802999500 ) ) ; +#9044 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 37.39962244433174700, -28.53664883431607500 ) ) ; +#9045 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#9046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66308, #72567, #47769, #10543 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005926447388200E-007, 0.0004084731003438805700 ), + .UNSPECIFIED. ) ; +#9048 = CARTESIAN_POINT ( 'NONE', ( 4.720904428263963800, 81.50050415885225200, -28.63287458792251500 ) ) ; +#9049 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223625300, 79.83407839971525300, -28.37510699173782000 ) ) ; +#9050 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9051 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#9052 = AXIS2_PLACEMENT_3D ( 'NONE', #56772, #69022, #13285 ) ; +#9053 = CIRCLE ( 'NONE', #259, 9.500000000000099500 ) ; +#9054 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484630700, 70.58127875436075300, -28.53757464917597600 ) ) ; +#9055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33942, #71199, #40183, #2917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794104664900E-007, 0.0009376791149930098700 ), + .UNSPECIFIED. ) ; +#9057 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819198200, 61.65075715145310700, -28.20555803802997700 ) ) ; +#9058 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#9059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9060 = VERTEX_POINT ( 'NONE', #70703 ) ; +#9061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9062 = PLANE ( 'NONE', #23149 ) ; +#9063 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9065 = ORIENTED_EDGE ( 'NONE', *, *, #20236, .F. ) ; +#9066 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9067 = FACE_OUTER_BOUND ( 'NONE', #65200, .T. ) ; +#9068 = VERTEX_POINT ( 'NONE', #45931 ) ; +#9069 = FACE_OUTER_BOUND ( 'NONE', #41271, .T. ) ; +#9071 = EDGE_CURVE ( 'NONE', #16201, #13691, #78185, .T. ) ; +#9070 = VERTEX_POINT ( 'NONE', #58479 ) ; +#9072 = CIRCLE ( 'NONE', #27215, 9.500000000000099500 ) ; +#9073 = ORIENTED_EDGE ( 'NONE', *, *, #22602, .T. ) ; +#9074 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 80.13716795162659400, -28.48697406221667400 ) ) ; +#9075 = ORIENTED_EDGE ( 'NONE', *, *, #10095, .F. ) ; +#9076 = ORIENTED_EDGE ( 'NONE', *, *, #27132, .T. ) ; +#9077 = ADVANCED_FACE ( 'NONE', ( #44267 ), #42345, .F. ) ; +#9078 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 66.50000000000000000, -7.061964498581016200 ) ) ; +#9079 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528388900, 41.46868088498140300, -28.51286550264485000 ) ) ; +#9080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9081 = ADVANCED_FACE ( 'NONE', ( #60890 ), #27763, .T. ) ; +#9082 = CONICAL_SURFACE ( 'NONE', #25858, 10.00000000000009400, 0.7853981633974447300 ) ; +#9083 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 72.31032580520964400, -28.59353418718925600 ) ) ; +#9084 = EDGE_LOOP ( 'NONE', ( #80232, #46602, #77720, #2709, #31388 ) ) ; +#9085 = EDGE_CURVE ( 'NONE', #58909, #33380, #75454, .T. ) ; +#9086 = CIRCLE ( 'NONE', #6057, 10.00000000000009400 ) ; +#9087 = EDGE_CURVE ( 'NONE', #12827, #61855, #27803, .T. ) ; +#9088 = ORIENTED_EDGE ( 'NONE', *, *, #56417, .T. ) ; +#9089 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9090 = CARTESIAN_POINT ( 'NONE', ( 10.63940720644241400, 18.16749699759752800, -28.25435056028494400 ) ) ; +#9091 = ORIENTED_EDGE ( 'NONE', *, *, #52234, .F. ) ; +#9092 = EDGE_LOOP ( 'NONE', ( #73818, #7927, #64707, #74178 ) ) ; +#9093 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#9094 = ORIENTED_EDGE ( 'NONE', *, *, #39872, .T. ) ; +#9095 = FACE_OUTER_BOUND ( 'NONE', #19396, .T. ) ; +#9096 = AXIS2_PLACEMENT_3D ( 'NONE', #60272, #22995, #66514 ) ; +#9097 = EDGE_LOOP ( 'NONE', ( #24268, #79701, #7854 ) ) ; +#9098 = EDGE_CURVE ( 'NONE', #37280, #33176, #79374, .T. ) ; +#9099 = EDGE_CURVE ( 'NONE', #53959, #49881, #77403, .T. ) ; +#9100 = EDGE_CURVE ( 'NONE', #36504, #63824, #58900, .T. ) ; +#9101 = ADVANCED_FACE ( 'NONE', ( #25843 ), #72680, .F. ) ; +#9102 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56245, #18983, #75034, #37736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.008791465289788802400, 0.008828470447789543000 ), + .UNSPECIFIED. ) ; +#9103 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679528700, 51.08083798124332000, -28.45106778992437700 ) ) ; +#9104 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999972900, 90.16749699759753900, -28.20555803803014400 ) ) ; +#9105 = CARTESIAN_POINT ( 'NONE', ( -3.242975574465502200, 90.16517473503392900, -28.29551658696704700 ) ) ; +#9106 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 37.83333333333334300, 1.741883078712340300 ) ) ; +#9107 = ORIENTED_EDGE ( 'NONE', *, *, #46045, .T. ) ; +#9108 = EDGE_LOOP ( 'NONE', ( #33812, #30463, #38846, #27004 ) ) ; +#9109 = AXIS2_PLACEMENT_3D ( 'NONE', #52203, #33479, #27522 ) ; +#9110 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428597800, 49.57141756547894600, -28.70555803802996700 ) ) ; +#9111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9112 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#9113 = ORIENTED_EDGE ( 'NONE', *, *, #58562, .T. ) ; +#9114 = CONICAL_SURFACE ( 'NONE', #33583, 10.00000000000009600, 0.7853981633974447300 ) ; +#9115 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 71.08083798124329200, -28.45106778992437700 ) ) ; +#9116 = PLANE ( 'NONE', #21561 ) ; +#9117 = CARTESIAN_POINT ( 'NONE', ( -11.51272810170989500, 51.47860083896994600, -28.56001287362844500 ) ) ; +#9118 = CARTESIAN_POINT ( 'NONE', ( 3.221259145455657600, 28.66476764525110700, -28.30311733712046200 ) ) ; +#9119 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#9120 = AXIS2_PLACEMENT_3D ( 'NONE', #3219, #9477, #65305 ) ; +#9121 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112215100, 29.07332680091207800, -28.37233769390153900 ) ) ; +#9122 = AXIS2_PLACEMENT_3D ( 'NONE', #71218, #15194, #33963 ) ; +#9123 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#9124 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263272300, 35.04999999999995500, -28.70555803802995200 ) ) ; +#9125 = CARTESIAN_POINT ( 'NONE', ( 17.24454976001801400, 8.877725119990993000, -28.45040264298925300 ) ) ; +#9126 = PLANE ( 'NONE', #33626 ) ; +#9127 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 0.1666666666666910300, 0.9380355014189834000 ) ) ; +#9128 = CONICAL_SURFACE ( 'NONE', #738, 10.50000000000009600, 0.7853981633974500600 ) ; +#9129 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17313, #54575, #29875, #73352 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003690754108545235400, 0.001145887823880466400 ), + .UNSPECIFIED. ) ; +#9133 = ORIENTED_EDGE ( 'NONE', *, *, #70012, .T. ) ; +#9134 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#9135 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571445700, 31.02858243452105600, -28.70555803802996700 ) ) ; +#9136 = AXIS2_PLACEMENT_3D ( 'NONE', #49787, #56077, #37290 ) ; +#9137 = EDGE_CURVE ( 'NONE', #10062, #57507, #24977, .T. ) ; +#9138 = EDGE_LOOP ( 'NONE', ( #25163, #59871, #10542 ) ) ; +#9139 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 79.60439022488336000, -28.70555803802997700 ) ) ; +#9140 = VERTEX_POINT ( 'NONE', #9788 ) ; +#9141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9142 = CIRCLE ( 'NONE', #10463, 9.500000000000099500 ) ; +#9143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9144 = ORIENTED_EDGE ( 'NONE', *, *, #2532, .T. ) ; +#9145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9147 = CIRCLE ( 'NONE', #72697, 10.00000000000009600 ) ; +#9148 = EDGE_LOOP ( 'NONE', ( #47892, #24075, #18729 ) ) ; +#9149 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9150 = EDGE_CURVE ( 'NONE', #167, #15447, #63739, .T. ) ; +#9151 = VERTEX_POINT ( 'NONE', #78329 ) ; +#9152 = CONICAL_SURFACE ( 'NONE', #58417, 10.00000000000009400, 0.7853981633974447300 ) ; +#9153 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48819, #5334, #5603, #49081 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720820008500E-007, 0.0002592600401777328100 ), + .UNSPECIFIED. ) ; +#9154 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9155 = CONICAL_SURFACE ( 'NONE', #10110, 10.50000000000009600, 0.7853981633974500600 ) ; +#9156 = AXIS2_PLACEMENT_3D ( 'NONE', #58858, #21624, #65148 ) ; +#9158 = ORIENTED_EDGE ( 'NONE', *, *, #51972, .F. ) ; +#9157 = CARTESIAN_POINT ( 'NONE', ( 11.03590776526159600, 49.50212297965121200, -28.25344967589750300 ) ) ; +#9159 = ORIENTED_EDGE ( 'NONE', *, *, #20085, .T. ) ; +#9160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9161 = VERTEX_POINT ( 'NONE', #59564 ) ; +#9162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9164 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#9165 = CARTESIAN_POINT ( 'NONE', ( -10.22115791441228400, 20.43523632220588100, -28.30315276798564700 ) ) ; +#9166 = ADVANCED_FACE ( 'NONE', ( #8392 ), #23034, .T. ) ; +#9167 = FACE_OUTER_BOUND ( 'NONE', #31237, .T. ) ; +#9168 = VERTEX_POINT ( 'NONE', #22559 ) ; +#9169 = AXIS2_PLACEMENT_3D ( 'NONE', #24728, #55717, #31003 ) ; +#9170 = CONICAL_SURFACE ( 'NONE', #45553, 10.50000000000009800, 0.7853981633974518300 ) ; +#9171 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#9172 = EDGE_LOOP ( 'NONE', ( #58301, #63009, #41600, #56852 ) ) ; +#9173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9174 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428634700, 90.07141756547879700, -28.70555803803014400 ) ) ; +#9175 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 9.500000000000003600, -9.258116921287651700 ) ) ; +#9176 = VERTEX_POINT ( 'NONE', #66087 ) ; +#9177 = EDGE_LOOP ( 'NONE', ( #56995, #50622, #45434, #50654 ) ) ; +#9178 = VERTEX_POINT ( 'NONE', #28869 ) ; +#9179 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529600, 45.54999999999999700, -28.20555803802996700 ) ) ; +#9180 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042476800, 17.00972971738996600, -28.70555803802992000 ) ) ; +#9181 = ORIENTED_EDGE ( 'NONE', *, *, #65666, .T. ) ; +#9182 = ADVANCED_FACE ( 'NONE', ( #56104 ), #70696, .T. ) ; +#9183 = FACE_OUTER_BOUND ( 'NONE', #76102, .T. ) ; +#9184 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 43.83333333333334300, 3.794441961969996900 ) ) ; +#9185 = AXIS2_PLACEMENT_3D ( 'NONE', #48065, #10845, #54341 ) ; +#9186 = ORIENTED_EDGE ( 'NONE', *, *, #77443, .F. ) ; +#9187 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492351800, 88.56055603621138100, -28.70555803803001300 ) ) ; +#9188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9189 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31434, #68684, #50146, #12935 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278958047400, 0.001249956855143341300 ), + .UNSPECIFIED. ) ; +#9190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9191 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 8.833333333333351700, 6.794441961969992500 ) ) ; +#9192 = ORIENTED_EDGE ( 'NONE', *, *, #32240, .F. ) ; +#9193 = ORIENTED_EDGE ( 'NONE', *, *, #73610, .F. ) ; +#9194 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#9195 = CARTESIAN_POINT ( 'NONE', ( 2.162096896535106700E-013, 16.17143691309403100, -28.36981695106786100 ) ) ; +#9196 = EDGE_CURVE ( 'NONE', #30415, #10246, #9250, .T. ) ; +#9197 = ORIENTED_EDGE ( 'NONE', *, *, #62631, .T. ) ; +#9198 = ORIENTED_EDGE ( 'NONE', *, *, #14651, .T. ) ; +#9199 = CARTESIAN_POINT ( 'NONE', ( 5.200545803703474400, 44.44999999999998900, 4.873448734756340900 ) ) ; +#9200 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455567000, 51.87833896172670500, -28.53892303408230200 ) ) ; +#9201 = CONICAL_SURFACE ( 'NONE', #54901, 10.50000000000009600, 0.7853981633974518300 ) ; +#9202 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 46.16666666666667100, -12.20555803803000000 ) ) ; +#9203 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195939300, 36.94142842854297000, -28.37229765499279900 ) ) ; +#9204 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857150800, 43.67681279774500800, -28.70555803802997700 ) ) ; +#9205 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9207 = ADVANCED_FACE ( 'NONE', ( #73520 ), #21097, .T. ) ; +#9208 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000063900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#9209 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#9210 = EDGE_CURVE ( 'NONE', #55730, #21643, #49216, .T. ) ; +#9211 = CONICAL_SURFACE ( 'NONE', #76729, 10.00000000000009600, 0.7853981633974447300 ) ; +#9212 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343256600, 18.35339758437769200, -28.20555803803025800 ) ) ; +#9213 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#9214 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823702100, 38.19543746431600100, -28.61277292027075700 ) ) ; +#9215 = EDGE_CURVE ( 'NONE', #49536, #23348, #56963, .T. ) ; +#9216 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#9217 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#9218 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 33.87738371066727400, -28.70555803802996700 ) ) ; +#9219 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#9220 = ORIENTED_EDGE ( 'NONE', *, *, #68635, .T. ) ; +#9222 = ORIENTED_EDGE ( 'NONE', *, *, #67051, .T. ) ; +#9221 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819243100, 69.94924284854681700, -28.20555803803005900 ) ) ; +#9223 = CONICAL_SURFACE ( 'NONE', #35904, 10.00000000000009400, 0.7853981633974447300 ) ; +#9224 = CARTESIAN_POINT ( 'NONE', ( 3.756937565509314700, 61.43482212736777400, -28.29548618595838900 ) ) ; +#9225 = AXIS2_PLACEMENT_3D ( 'NONE', #78656, #10099, #47589 ) ; +#9226 = EDGE_CURVE ( 'NONE', #9646, #26075, #34813, .T. ) ; +#9227 = ORIENTED_EDGE ( 'NONE', *, *, #25728, .T. ) ; +#9228 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999990200, 53.99926474563203300, -28.70555803803001300 ) ) ; +#9229 = EDGE_CURVE ( 'NONE', #30596, #31391, #20330, .T. ) ; +#9230 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9231 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 89.97246552159114700, -28.38801640354856600 ) ) ; +#9232 = FACE_OUTER_BOUND ( 'NONE', #45829, .T. ) ; +#9233 = AXIS2_PLACEMENT_3D ( 'NONE', #12409, #68412, #49607 ) ; +#9234 = CONICAL_SURFACE ( 'NONE', #49642, 10.00000000000009200, 0.7853981633974447300 ) ; +#9235 = ORIENTED_EDGE ( 'NONE', *, *, #40433, .T. ) ; +#9236 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 49.66666666666667900, 2.794441961969992100 ) ) ; +#9237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9238 = CARTESIAN_POINT ( 'NONE', ( 2.438174915909129000, 41.48385710212512100, -28.57719681746179000 ) ) ; +#9239 = CONICAL_SURFACE ( 'NONE', #75558, 10.00000000000009200, 0.7853981633974447300 ) ; +#9240 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60776, #17244, #67013, #29796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690662334100E-007, 0.0007331055842534807300 ), + .UNSPECIFIED. ) ; +#9241 = ORIENTED_EDGE ( 'NONE', *, *, #30273, .F. ) ; +#9242 = ORIENTED_EDGE ( 'NONE', *, *, #42004, .T. ) ; +#9243 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#9244 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939079200, 25.18533208989820000, -28.53910738522650400 ) ) ; +#9245 = CARTESIAN_POINT ( 'NONE', ( 8.851846210996310300, 75.79999999999999700, -28.37148172714570600 ) ) ; +#9246 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9248 = CARTESIAN_POINT ( 'NONE', ( -3.935444260775057500, 70.09037803491492000, -28.29483400905883200 ) ) ; +#9249 = EDGE_CURVE ( 'NONE', #64791, #26617, #5882, .T. ) ; +#9250 = CIRCLE ( 'NONE', #33216, 10.50000000000009800 ) ; +#9251 = EDGE_CURVE ( 'NONE', #12637, #21929, #72222, .T. ) ; +#9253 = CIRCLE ( 'NONE', #16910, 10.00000000000009200 ) ; +#9252 = AXIS2_PLACEMENT_3D ( 'NONE', #46618, #9378, #52893 ) ; +#9254 = EDGE_LOOP ( 'NONE', ( #7532, #80276, #52724, #57437, #57671 ) ) ; +#9255 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 41.46868088498121800, -28.51286550264512700 ) ) ; +#9256 = CONICAL_SURFACE ( 'NONE', #66944, 10.50000000000009600, 0.7853981633974518300 ) ; +#9257 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 49.33333333333335000, 5.722645192245503900 ) ) ; +#9258 = ORIENTED_EDGE ( 'NONE', *, *, #39223, .F. ) ; +#9259 = ORIENTED_EDGE ( 'NONE', *, *, #73493, .F. ) ; +#9260 = ORIENTED_EDGE ( 'NONE', *, *, #13194, .F. ) ; +#9261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9262 = VERTEX_POINT ( 'NONE', #36656 ) ; +#9263 = EDGE_CURVE ( 'NONE', #25568, #63478, #57715, .T. ) ; +#9264 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 14.83333333333335700, -3.349151577478984600 ) ) ; +#9265 = CARTESIAN_POINT ( 'NONE', ( 19.28323599344429000, 93.74110397814749300, -27.74542486699992200 ) ) ; +#9266 = CIRCLE ( 'NONE', #14076, 10.00000000000009400 ) ; +#9267 = AXIS2_PLACEMENT_3D ( 'NONE', #60490, #47923, #72994 ) ; +#9268 = ORIENTED_EDGE ( 'NONE', *, *, #21124, .F. ) ; +#9269 = AXIS2_PLACEMENT_3D ( 'NONE', #33101, #76605, #39336 ) ; +#9270 = CARTESIAN_POINT ( 'NONE', ( 10.53518765398347900, 9.406791769321794000, -28.68794773163823600 ) ) ; +#9271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9272 = ADVANCED_FACE ( 'NONE', ( #6471 ), #52176, .T. ) ; +#9273 = ORIENTED_EDGE ( 'NONE', *, *, #57874, .F. ) ; +#9274 = ORIENTED_EDGE ( 'NONE', *, *, #30360, .T. ) ; +#9275 = CONICAL_SURFACE ( 'NONE', #46656, 10.00000000000009200, 0.7853981633974447300 ) ; +#9276 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#9277 = ORIENTED_EDGE ( 'NONE', *, *, #63996, .T. ) ; +#9278 = CONICAL_SURFACE ( 'NONE', #38668, 10.00000000000009600, 0.7853981633974482800 ) ; +#9279 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171147300, 40.14330698006848100, -28.57107744631858600 ) ) ; +#9280 = ADVANCED_FACE ( 'NONE', ( #54144 ), #19112, .F. ) ; +#9281 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 18.16666666666667100, -2.545304000185620600 ) ) ; +#9282 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#9283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#9284 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6250, #12522, #68543, #31283 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.995913259815180500E-016, 0.001246264537621691700 ), + .UNSPECIFIED. ) ; +#9285 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#9286 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 58.33333333333334300, -5.205558038030008400 ) ) ; +#9287 = AXIS2_PLACEMENT_3D ( 'NONE', #38690, #1448, #44931 ) ; +#9288 = CARTESIAN_POINT ( 'NONE', ( -11.51258998854903800, 90.12140959736001400, -28.55996453402214300 ) ) ; +#9289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9290 = CONICAL_SURFACE ( 'NONE', #64749, 10.00000000000009400, 0.7853981633974447300 ) ; +#9291 = ADVANCED_FACE ( 'NONE', ( #4520 ), #66816, .T. ) ; +#9292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60229, #78732, #79254, #41965 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940577012600 ), + .UNSPECIFIED. ) ; +#9293 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 27.12623792124938800, -28.70555803802994200 ) ) ; +#9294 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 69.98922577050341000, -28.37255355648634500 ) ) ; +#9295 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819300, 39.13131911501876200, -28.51286550264508800 ) ) ; +#9296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52612, #15650, #28192, #71683 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799595485400E-007, 0.0005050252131284491200 ), + .UNSPECIFIED. ) ; +#9297 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 71.25732391202359400, -28.20555803803030800 ) ) ; +#9298 = VERTEX_POINT ( 'NONE', #18445 ) ; +#9299 = CIRCLE ( 'NONE', #40535, 9.500000000000101300 ) ; +#9300 = AXIS2_PLACEMENT_3D ( 'NONE', #34450, #71716, #21933 ) ; +#9301 = VERTEX_POINT ( 'NONE', #61978 ) ; +#9302 = ORIENTED_EDGE ( 'NONE', *, *, #13802, .F. ) ; +#9303 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9304 = ADVANCED_FACE ( 'NONE', ( #41515 ), #33713, .F. ) ; +#9305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9306 = EDGE_CURVE ( 'NONE', #76860, #68330, #37587, .T. ) ; +#9307 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1206, #75730, #69481, #44683 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217712289641800E-007, 0.0008482615949374496800 ), + .UNSPECIFIED. ) ; +#9308 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9309 = CARTESIAN_POINT ( 'NONE', ( -3.983782602394200500, 7.259459441370619700, -28.33110170628422600 ) ) ; +#9310 = FACE_OUTER_BOUND ( 'NONE', #12333, .T. ) ; +#9311 = CONICAL_SURFACE ( 'NONE', #21001, 10.00000000000009400, 0.7853981633974447300 ) ; +#9312 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 20.66666666666668600, 3.124568980892192800 ) ) ; +#9313 = AXIS2_PLACEMENT_3D ( 'NONE', #34396, #77922, #40636 ) ; +#9314 = ORIENTED_EDGE ( 'NONE', *, *, #12238, .F. ) ; +#9315 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9316 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#9317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9318 = FACE_OUTER_BOUND ( 'NONE', #1745, .T. ) ; +#9319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9320 = ORIENTED_EDGE ( 'NONE', *, *, #74117, .F. ) ; +#9321 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 77.92318720225496500, -28.70555803802997700 ) ) ; +#9322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9324 = VERTEX_POINT ( 'NONE', #37172 ) ; +#9323 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 71.43945992495532900, -28.34042301926885800 ) ) ; +#9325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9326 = CARTESIAN_POINT ( 'NONE', ( -17.22115791441229100, 41.43523632220588100, -28.30315276798567600 ) ) ; +#9327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9328 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9329 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188353100, 49.70564881207762700, -28.41114655922299900 ) ) ; +#9330 = CONICAL_SURFACE ( 'NONE', #56089, 10.00000000000009200, 0.7853981633974447300 ) ; +#9331 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155506100, 75.79999999999967000, -28.20555803803030800 ) ) ; +#9332 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019500, 51.43250300240212200, -28.20555803803014400 ) ) ; +#9333 = CIRCLE ( 'NONE', #56451, 10.00000000000009200 ) ; +#9334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9335 = CARTESIAN_POINT ( 'NONE', ( -24.99812495107235900, 96.75801550447573600, -18.92902576075463700 ) ) ; +#9336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9337 = ORIENTED_EDGE ( 'NONE', *, *, #11993, .T. ) ; +#9338 = EDGE_CURVE ( 'NONE', #25461, #75213, #43246, .T. ) ; +#9339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9340 = CARTESIAN_POINT ( 'NONE', ( 16.74542889975913300, 93.89028007257837800, -28.42418142511652900 ) ) ; +#9341 = EDGE_LOOP ( 'NONE', ( #54370, #73046, #3613, #39146 ) ) ; +#9342 = ORIENTED_EDGE ( 'NONE', *, *, #56078, .T. ) ; +#9343 = EDGE_CURVE ( 'NONE', #28848, #68875, #68762, .T. ) ; +#9344 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105665700, 35.05000000000001100, -28.70555803802995200 ) ) ; +#9345 = VERTEX_POINT ( 'NONE', #74484 ) ; +#9346 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9347 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72696, #29211, #10671, #54166 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287064110800E-007, 0.0002670038068533520700 ), + .UNSPECIFIED. ) ; +#9348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9350 = CIRCLE ( 'NONE', #37027, 10.00000000000009600 ) ; +#9351 = CIRCLE ( 'NONE', #56674, 10.00000000000009400 ) ; +#9352 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752687600, 79.51229806853763200, -28.47147304844863000 ) ) ; +#9353 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489671700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#9354 = ORIENTED_EDGE ( 'NONE', *, *, #19878, .F. ) ; +#9355 = EDGE_LOOP ( 'NONE', ( #32461, #1249, #68512, #52154 ) ) ; +#9356 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571890700, 18.07141756547868600, -28.70555803802992800 ) ) ; +#9357 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40320, #34084, #7969, #3054 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674119332300E-007, 0.0007987728781051952200 ), + .UNSPECIFIED. ) ; +#9358 = EDGE_CURVE ( 'NONE', #67687, #11140, #28860, .T. ) ; +#9359 = EDGE_CURVE ( 'NONE', #301, #16262, #14343, .T. ) ; +#9360 = VERTEX_POINT ( 'NONE', #43949 ) ; +#9361 = FACE_OUTER_BOUND ( 'NONE', #42047, .T. ) ; +#9362 = AXIS2_PLACEMENT_3D ( 'NONE', #46186, #58721, #21493 ) ; +#9363 = EDGE_LOOP ( 'NONE', ( #57502, #32957, #3392 ) ) ; +#9364 = EDGE_LOOP ( 'NONE', ( #3877, #28373, #34122, #33967, #59113, #55615 ) ) ; +#9365 = CIRCLE ( 'NONE', #64241, 10.50000000000009600 ) ; +#9366 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 64.33333333333334300, 5.722645192245503900 ) ) ; +#9367 = AXIS2_PLACEMENT_3D ( 'NONE', #10582, #54085, #16839 ) ; +#9368 = EDGE_CURVE ( 'NONE', #3005, #22562, #80663, .T. ) ; +#9370 = ORIENTED_EDGE ( 'NONE', *, *, #4201, .T. ) ; +#9369 = EDGE_CURVE ( 'NONE', #78197, #56951, #2543, .T. ) ; +#9371 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 38.81066373133501200, -28.53923937255170500 ) ) ; +#9372 = EDGE_CURVE ( 'NONE', #14656, #75159, #35678, .T. ) ; +#9373 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#9374 = CARTESIAN_POINT ( 'NONE', ( 1.968911145233676100E-013, 15.22261628933274100, -28.70555803803009500 ) ) ; +#9375 = AXIS2_PLACEMENT_3D ( 'NONE', #37834, #571, #44066 ) ; +#9376 = CIRCLE ( 'NONE', #77692, 10.50000000000009400 ) ; +#9377 = VERTEX_POINT ( 'NONE', #31759 ) ; +#9378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9379 = CIRCLE ( 'NONE', #19650, 9.500000000000095900 ) ; +#9380 = AXIS2_PLACEMENT_3D ( 'NONE', #33482, #2186, #51940 ) ; +#9381 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.79999999999982700, -28.20555803803014400 ) ) ; +#9382 = ORIENTED_EDGE ( 'NONE', *, *, #2910, .F. ) ; +#9383 = EDGE_CURVE ( 'NONE', #8272, #18844, #39565, .T. ) ; +#9384 = ORIENTED_EDGE ( 'NONE', *, *, #15082, .F. ) ; +#9385 = CIRCLE ( 'NONE', #41022, 9.500000000000097700 ) ; +#9386 = ADVANCED_FACE ( 'NONE', ( #50226 ), #50209, .T. ) ; +#9387 = AXIS2_PLACEMENT_3D ( 'NONE', #58544, #21289, #8740 ) ; +#9388 = AXIS2_PLACEMENT_3D ( 'NONE', #52250, #21285, #8737 ) ; +#9389 = VERTEX_POINT ( 'NONE', #44211 ) ; +#9390 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217464600, 60.16054007504464400, -28.34042301926885400 ) ) ; +#9391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9392 = CARTESIAN_POINT ( 'NONE', ( 16.81665446368110800, 6.893879557643169100, -28.20555803802619400 ) ) ; +#9393 = CARTESIAN_POINT ( 'NONE', ( -2.438174915909278700, 9.983857102125107000, -28.57719681746169400 ) ) ; +#9394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9395 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 35.66666666666666400, -6.705558038030000400 ) ) ; +#9396 = CIRCLE ( 'NONE', #11905, 9.500000000000099500 ) ; +#9397 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 87.94142842854296300, -28.20555803802997700 ) ) ; +#9398 = CONICAL_SURFACE ( 'NONE', #21481, 10.00000000000009400, 0.7853981633974447300 ) ; +#9399 = VERTEX_POINT ( 'NONE', #7244 ) ; +#9400 = CARTESIAN_POINT ( 'NONE', ( -8.705837858217808600, 35.05000000000000400, -28.37136602294609100 ) ) ; +#9401 = ADVANCED_FACE ( 'NONE', ( #15220 ), #62928, .F. ) ; +#9402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9403 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042360900, 17.00972971738973500, -28.70555803803003800 ) ) ; +#9404 = ORIENTED_EDGE ( 'NONE', *, *, #71424, .T. ) ; +#9405 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#9406 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489654800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#9407 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145289000, 89.73198281203403300, -28.34169759783695100 ) ) ; +#9408 = ADVANCED_FACE ( 'NONE', ( #605 ), #29863, .T. ) ; +#9409 = ORIENTED_EDGE ( 'NONE', *, *, #74795, .F. ) ; +#9410 = ADVANCED_FACE ( 'NONE', ( #17178 ), #77502, .F. ) ; +#9411 = CARTESIAN_POINT ( 'NONE', ( 15.63380660252644100, 92.23380660253629100, -28.70555803803104300 ) ) ; +#9412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77140, #33629, #71155, #33892 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572076749100E-007, 0.0007596410370205296800 ), + .UNSPECIFIED. ) ; +#9413 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020500, 65.79999999999950000, -28.70555803803047500 ) ) ; +#9414 = FACE_OUTER_BOUND ( 'NONE', #58163, .T. ) ; +#9415 = AXIS2_PLACEMENT_3D ( 'NONE', #36310, #79840, #42545 ) ; +#9416 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 83.99926474563210400, -28.70555803802999500 ) ) ; +#9417 = ORIENTED_EDGE ( 'NONE', *, *, #12786, .T. ) ; +#9418 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -1.999999999999988000, -1.205558038030005300 ) ) ; +#9419 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671982600, 51.93585231025891600, -28.38420446581276100 ) ) ; +#9420 = VERTEX_POINT ( 'NONE', #51006 ) ; +#9421 = ORIENTED_EDGE ( 'NONE', *, *, #14174, .T. ) ; +#9422 = ORIENTED_EDGE ( 'NONE', *, *, #60965, .T. ) ; +#9423 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 30.74660241562190100, -28.20555803802995200 ) ) ; +#9424 = CIRCLE ( 'NONE', #76585, 10.50000000000009200 ) ; +#9425 = AXIS2_PLACEMENT_3D ( 'NONE', #51722, #14508, #58022 ) ; +#9427 = EDGE_LOOP ( 'NONE', ( #24679, #68832, #63694 ) ) ; +#9426 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819300, 39.13131911501876200, -28.51286550264508800 ) ) ; +#9428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9429 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37333, #62395, #355, #43850 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169391079674400E-007, 0.0008082646680358102100 ), + .UNSPECIFIED. ) ; +#9430 = ORIENTED_EDGE ( 'NONE', *, *, #1842, .T. ) ; +#9431 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9433 = EDGE_CURVE ( 'NONE', #41717, #29008, #13289, .T. ) ; +#9434 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474191200, 31.36172549728279800, -28.47230003642276600 ) ) ; +#9435 = FACE_OUTER_BOUND ( 'NONE', #45720, .T. ) ; +#9436 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174765400, 71.43945992495534400, -28.34042301926881900 ) ) ; +#9437 = ORIENTED_EDGE ( 'NONE', *, *, #8029, .T. ) ; +#9438 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 80.24722181384567000, -28.70555803802999500 ) ) ; +#9439 = AXIS2_PLACEMENT_3D ( 'NONE', #2908, #46401, #9145 ) ; +#9440 = ORIENTED_EDGE ( 'NONE', *, *, #20297, .F. ) ; +#9441 = CONICAL_SURFACE ( 'NONE', #60537, 10.50000000000009200, 0.7853981633974482800 ) ; +#9442 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310633400, 61.49769010897038200, -28.61774594594310300 ) ) ; +#9443 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#9444 = FACE_OUTER_BOUND ( 'NONE', #21331, .T. ) ; +#9445 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456209800, 81.52472935029896900, -28.39317435246121200 ) ) ; +#9446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9447 = CARTESIAN_POINT ( 'NONE', ( -3.639407206442141900, 39.16749699759768800, -28.25435056028471000 ) ) ; +#9448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9449 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16806, #66310, #60070, #60332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487880300 ), + .UNSPECIFIED. ) ; +#9450 = ORIENTED_EDGE ( 'NONE', *, *, #74005, .F. ) ; +#9451 = EDGE_CURVE ( 'NONE', #78358, #17105, #66227, .T. ) ; +#9452 = CARTESIAN_POINT ( 'NONE', ( 4.035907765261414100, 18.00212297965146400, -28.25344967589762700 ) ) ; +#9453 = FACE_OUTER_BOUND ( 'NONE', #74463, .T. ) ; +#9455 = ORIENTED_EDGE ( 'NONE', *, *, #70088, .T. ) ; +#9454 = CARTESIAN_POINT ( 'NONE', ( 11.03590776526141700, 28.50212297965146000, -28.25344967589763800 ) ) ; +#9456 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116447600, 30.89435118792235000, -28.41114655922300300 ) ) ; +#9457 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 7.333333333333350800, 4.294441961970000500 ) ) ; +#9458 = EDGE_CURVE ( 'NONE', #20495, #12400, #48275, .T. ) ; +#9459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9460 = ORIENTED_EDGE ( 'NONE', *, *, #79332, .T. ) ; +#9461 = CONICAL_SURFACE ( 'NONE', #68080, 10.00000000000009400, 0.7853981633974447300 ) ; +#9462 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 41.66666666666667900, -5.535685056952199400 ) ) ; +#9463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9465 = EDGE_CURVE ( 'NONE', #5551, #59550, #51694, .T. ) ; +#9466 = EDGE_LOOP ( 'NONE', ( #30987, #36181, #16475, #74439 ) ) ; +#9467 = PLANE ( 'NONE', #47966 ) ; +#9468 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 6.666666666666682100, -8.133761268305512700 ) ) ; +#9469 = EDGE_CURVE ( 'NONE', #69758, #30596, #37246, .T. ) ; +#9470 = AXIS2_PLACEMENT_3D ( 'NONE', #40398, #3126, #46635 ) ; +#9471 = CIRCLE ( 'NONE', #2571, 10.00000000000009400 ) ; +#9472 = VERTEX_POINT ( 'NONE', #51548 ) ; +#9473 = EDGE_CURVE ( 'NONE', #16691, #13039, #22823, .T. ) ; +#9474 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195353200, 17.68365405593803500, -28.35038903107268700 ) ) ; +#9475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9476 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 44.00000000000000700, 9.794441961969996100 ) ) ; +#9477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9479 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890876200, 81.10236277681499900, -28.32100408376067300 ) ) ; +#9480 = ORIENTED_EDGE ( 'NONE', *, *, #20570, .T. ) ; +#9481 = AXIS2_PLACEMENT_3D ( 'NONE', #5160, #11433, #42396 ) ; +#9482 = EDGE_CURVE ( 'NONE', #6698, #14665, #8325, .T. ) ; +#9483 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 38.81066373133501200, -28.53923937255169500 ) ) ; +#9484 = EDGE_CURVE ( 'NONE', #78191, #15261, #74685, .T. ) ; +#9485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28068, #78076, #16060, #59590 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549544247800E-007, 0.0008759529789573582600 ), + .UNSPECIFIED. ) ; +#9486 = CARTESIAN_POINT ( 'NONE', ( -11.46986311119036400, 9.146957350529760300, -28.66910751791843700 ) ) ; +#9487 = EDGE_CURVE ( 'NONE', #61108, #32745, #79464, .T. ) ; +#9488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9489 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459553500, 72.51973550835660400, -28.70555803802997700 ) ) ; +#9490 = CIRCLE ( 'NONE', #63029, 10.00000000000009400 ) ; +#9491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9492 = CIRCLE ( 'NONE', #67312, 10.50000000000009800 ) ; +#9493 = EDGE_LOOP ( 'NONE', ( #18989, #14191, #35548, #3563, #45618, #57048 ) ) ; +#9494 = VERTEX_POINT ( 'NONE', #58108 ) ; +#9495 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#9496 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390048300, 70.13716795162662300, -28.48697406221649700 ) ) ; +#9497 = ORIENTED_EDGE ( 'NONE', *, *, #8975, .T. ) ; +#9498 = ORIENTED_EDGE ( 'NONE', *, *, #20579, .T. ) ; +#9499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9500 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339058100, 60.13716795162658700, -28.48697406221668200 ) ) ; +#9501 = ORIENTED_EDGE ( 'NONE', *, *, #76812, .F. ) ; +#9502 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040301800, 77.94142842854303400, -28.37229765499282100 ) ) ; +#9503 = CARTESIAN_POINT ( 'NONE', ( 11.51258998854884100, 70.12140959735988600, -28.55996453402224200 ) ) ; +#9504 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899331200, 49.12363993080086300, -28.38670679782169500 ) ) ; +#9505 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9506 = ADVANCED_FACE ( 'NONE', ( #31776 ), #75539, .F. ) ; +#9507 = AXIS2_PLACEMENT_3D ( 'NONE', #48344, #17372, #4849 ) ; +#9508 = PLANE ( 'NONE', #12736 ) ; +#9509 = AXIS2_PLACEMENT_3D ( 'NONE', #61572, #24305, #67817 ) ; +#9510 = ORIENTED_EDGE ( 'NONE', *, *, #17836, .F. ) ; +#9511 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#9512 = ADVANCED_FACE ( 'NONE', ( #60968 ), #42429, .T. ) ; +#9513 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492307800, 63.03944396378782500, -28.70555803803004500 ) ) ; +#9514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9515 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.68929190448939400, -28.20555803802997700 ) ) ; +#9516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9517 = FACE_OUTER_BOUND ( 'NONE', #74049, .T. ) ; +#9518 = VERTEX_POINT ( 'NONE', #21137 ) ; +#9519 = ORIENTED_EDGE ( 'NONE', *, *, #27384, .F. ) ; +#9520 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 47.50000000000000700, -7.061964498581016200 ) ) ; +#9521 = CARTESIAN_POINT ( 'NONE', ( 4.326623237073175000E-014, 73.42856308690586800, -28.36981695106784700 ) ) ; +#9522 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 79.94924284854654700, -28.20555803803014400 ) ) ; +#9523 = VERTEX_POINT ( 'NONE', #27392 ) ; +#9524 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#9525 = FACE_OUTER_BOUND ( 'NONE', #23820, .T. ) ; +#9526 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 81.56248377813449200, -28.32723995587591800 ) ) ; +#9527 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#9528 = AXIS2_PLACEMENT_3D ( 'NONE', #17700, #61236, #23962 ) ; +#9529 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 75.79999999999998300, -28.20555803802997700 ) ) ; +#9530 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180654400, 61.65075715145295700, -28.20555803803014100 ) ) ; +#9531 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725307500, 45.55000000000000400, -28.20555803802996700 ) ) ; +#9532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1479, #38713, #44960, #7727 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936602400, 0.0005776948474817079800 ), + .UNSPECIFIED. ) ; +#9533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9534 = ORIENTED_EDGE ( 'NONE', *, *, #58703, .F. ) ; +#9535 = ADVANCED_FACE ( 'NONE', ( #58999 ), #58384, .T. ) ; +#9536 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660889700, 90.13716795162605400, -28.48697406221735000 ) ) ; +#9537 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 51.50000000000001400, -7.061964498581017900 ) ) ; +#9538 = CONICAL_SURFACE ( 'NONE', #74500, 10.50000000000009600, 0.7853981633974482800 ) ; +#9539 = ORIENTED_EDGE ( 'NONE', *, *, #20803, .F. ) ; +#9540 = EDGE_CURVE ( 'NONE', #23109, #53826, #60237, .T. ) ; +#9541 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9542 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59802, #16276, #72322, #35059, #78575, #41270, #4013, #47500 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.001719839228549899200, 0.002579758842824848700, 0.003439678457099798800 ), + .UNSPECIFIED. ) ; +#9543 = AXIS2_PLACEMENT_3D ( 'NONE', #80796, #6258, #37239 ) ; +#9544 = EDGE_LOOP ( 'NONE', ( #3173, #44679, #16301 ) ) ; +#9545 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#9546 = ORIENTED_EDGE ( 'NONE', *, *, #15329, .T. ) ; +#9547 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 12.66666666666667300, 2.794441961969992100 ) ) ; +#9548 = CARTESIAN_POINT ( 'NONE', ( 21.83157148060970000, 95.01538127665031700, -26.01408451666861400 ) ) ; +#9549 = FACE_OUTER_BOUND ( 'NONE', #32005, .T. ) ; +#9550 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 80.16054007504463600, -28.34042301926881200 ) ) ; +#9551 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 31.17701665379185600, -28.20555803802995200 ) ) ; +#9552 = AXIS2_PLACEMENT_3D ( 'NONE', #28969, #72456, #35200 ) ; +#9553 = CONICAL_SURFACE ( 'NONE', #8761, 10.00000000000009200, 0.7853981633974447300 ) ; +#9554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9556 = ORIENTED_EDGE ( 'NONE', *, *, #74569, .F. ) ; +#9557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9558 = ORIENTED_EDGE ( 'NONE', *, *, #38300, .T. ) ; +#9559 = ORIENTED_EDGE ( 'NONE', *, *, #29483, .F. ) ; +#9560 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 16.00000000000001400, -1.205558038030002800 ) ) ; +#9561 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086482500, 39.47187418724321600, -28.37194250757536200 ) ) ; +#9562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9565 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 56.16666666666667900, 0.9380355014189834000 ) ) ; +#9566 = FACE_OUTER_BOUND ( 'NONE', #37804, .T. ) ; +#9567 = FACE_OUTER_BOUND ( 'NONE', #40454, .T. ) ; +#9568 = ORIENTED_EDGE ( 'NONE', *, *, #22714, .T. ) ; +#9569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9570 = ORIENTED_EDGE ( 'NONE', *, *, #24617, .F. ) ; +#9571 = EDGE_CURVE ( 'NONE', #10158, #23738, #45713, .T. ) ; +#9572 = ORIENTED_EDGE ( 'NONE', *, *, #63741, .F. ) ; +#9573 = FACE_OUTER_BOUND ( 'NONE', #22353, .T. ) ; +#9574 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183700, 28.63131911501876900, -28.51286550264508100 ) ) ; +#9575 = EDGE_CURVE ( 'NONE', #16181, #31068, #31303, .T. ) ; +#9576 = ORIENTED_EDGE ( 'NONE', *, *, #38279, .T. ) ; +#9577 = ORIENTED_EDGE ( 'NONE', *, *, #15915, .T. ) ; +#9578 = ORIENTED_EDGE ( 'NONE', *, *, #21191, .F. ) ; +#9579 = ORIENTED_EDGE ( 'NONE', *, *, #28725, .T. ) ; +#9580 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9581 = ORIENTED_EDGE ( 'NONE', *, *, #13565, .T. ) ; +#9582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9583 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769031500, 40.81139552890385100, -28.53900456328628400 ) ) ; +#9584 = ORIENTED_EDGE ( 'NONE', *, *, #8363, .T. ) ; +#9585 = EDGE_CURVE ( 'NONE', #34038, #67990, #16838, .T. ) ; +#9586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9587 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38708, #32488, #69746, #1472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331884803000 ), + .UNSPECIFIED. ) ; +#9588 = ADVANCED_FACE ( 'NONE', ( #44353 ), #73606, .T. ) ; +#9589 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9591 = VERTEX_POINT ( 'NONE', #77678 ) ; +#9592 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679516300, 60.51916201875676600, -28.45106778992441200 ) ) ; +#9593 = CIRCLE ( 'NONE', #30837, 10.00000000000009400 ) ; +#9594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9595 = ORIENTED_EDGE ( 'NONE', *, *, #14253, .T. ) ; +#9596 = EDGE_CURVE ( 'NONE', #79198, #77938, #9351, .T. ) ; +#9598 = EDGE_CURVE ( 'NONE', #65971, #46932, #2339, .T. ) ; +#9597 = ORIENTED_EDGE ( 'NONE', *, *, #55604, .T. ) ; +#9599 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9600 = EDGE_LOOP ( 'NONE', ( #4735, #50371, #7406 ) ) ; +#9601 = ORIENTED_EDGE ( 'NONE', *, *, #5913, .F. ) ; +#9602 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#9603 = ORIENTED_EDGE ( 'NONE', *, *, #50695, .T. ) ; +#9604 = CARTESIAN_POINT ( 'NONE', ( -2.487410011451149000, 60.12140959736001400, -28.55996453402207500 ) ) ; +#9605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9607 = CARTESIAN_POINT ( 'NONE', ( -17.40093558791467700, 59.90728766135835300, -28.41359472476244000 ) ) ; +#9608 = CIRCLE ( 'NONE', #38022, 10.00000000000009600 ) ; +#9609 = PLANE ( 'NONE', #74335 ) ; +#9610 = ADVANCED_FACE ( 'NONE', ( #11334 ), #23981, .F. ) ; +#9611 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#9612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9614 = AXIS2_PLACEMENT_3D ( 'NONE', #58476, #21228, #64761 ) ; +#9615 = EDGE_CURVE ( 'NONE', #74917, #69047, #40501, .T. ) ; +#9616 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 26.89962244433174000, -28.53664883431606500 ) ) ; +#9617 = EDGE_CURVE ( 'NONE', #39371, #42509, #46315, .T. ) ; +#9618 = EDGE_CURVE ( 'NONE', #57500, #80595, #25936, .T. ) ; +#9619 = VERTEX_POINT ( 'NONE', #53178 ) ; +#9620 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042484800, 21.59027028261001400, -28.70555803802993500 ) ) ; +#9621 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#9622 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9623 = AXIS2_PLACEMENT_3D ( 'NONE', #60528, #23238, #66769 ) ; +#9624 = CARTESIAN_POINT ( 'NONE', ( 16.11476726930894900, 91.05074060643303800, -28.65717938149374100 ) ) ; +#9625 = CONICAL_SURFACE ( 'NONE', #2492, 10.00000000000009200, 0.7853981633974447300 ) ; +#9626 = ORIENTED_EDGE ( 'NONE', *, *, #75485, .F. ) ; +#9627 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583911800, 41.01125751638927900, -28.53740755999536900 ) ) ; +#9628 = EDGE_LOOP ( 'NONE', ( #5708, #8857, #30722, #10689 ) ) ; +#9629 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105225600, 80.28233213024610400, -28.25051428653888800 ) ) ; +#9630 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ; +#9631 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#9632 = AXIS2_PLACEMENT_3D ( 'NONE', #7417, #13726, #44643 ) ; +#9633 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9634 = AXIS2_PLACEMENT_3D ( 'NONE', #80519, #43233, #5987 ) ; +#9635 = CARTESIAN_POINT ( 'NONE', ( 9.668959489914968200, 50.81480465755340200, -28.53901988778303400 ) ) ; +#9636 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1698, #8207, #27032, #70513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052613453500E-007, 0.0003301033223275548900 ), + .UNSPECIFIED. ) ; +#9637 = AXIS2_PLACEMENT_3D ( 'NONE', #43563, #12595, #57 ) ; +#9638 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 70.07141756547891000, -28.70555803802997700 ) ) ; +#9639 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#9640 = ADVANCED_FACE ( 'NONE', ( #64894 ), #22019, .T. ) ; +#9641 = FACE_OUTER_BOUND ( 'NONE', #78768, .T. ) ; +#9642 = CIRCLE ( 'NONE', #7720, 9.500000000000097700 ) ; +#9643 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49934, #75267, #13269, #56758 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553759417300E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#9644 = ORIENTED_EDGE ( 'NONE', *, *, #17540, .T. ) ; +#9645 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#9646 = VERTEX_POINT ( 'NONE', #28765 ) ; +#9647 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 62.16666666666665000, -9.205558038030003900 ) ) ; +#9648 = AXIS2_PLACEMENT_3D ( 'NONE', #15712, #22511, #66031 ) ; +#9649 = ORIENTED_EDGE ( 'NONE', *, *, #58086, .T. ) ; +#9650 = EDGE_CURVE ( 'NONE', #32608, #22008, #68689, .T. ) ; +#9651 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#9652 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#9653 = CIRCLE ( 'NONE', #71201, 10.50000000000009200 ) ; +#9654 = ORIENTED_EDGE ( 'NONE', *, *, #7276, .T. ) ; +#9655 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949238800, 42.02620220503713700, -28.70555803802996700 ) ) ; +#9656 = CIRCLE ( 'NONE', #68262, 10.00000000000009400 ) ; +#9657 = ORIENTED_EDGE ( 'NONE', *, *, #53547, .T. ) ; +#9658 = ORIENTED_EDGE ( 'NONE', *, *, #38325, .F. ) ; +#9659 = ORIENTED_EDGE ( 'NONE', *, *, #17499, .F. ) ; +#9660 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#9661 = EDGE_CURVE ( 'NONE', #54740, #63404, #54217, .T. ) ; +#9662 = FACE_OUTER_BOUND ( 'NONE', #35294, .T. ) ; +#9663 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000011500, 56.33333333333335700, 5.722645192245503100 ) ) ; +#9664 = VERTEX_POINT ( 'NONE', #22732 ) ; +#9665 = AXIS2_PLACEMENT_3D ( 'NONE', #71365, #34102, #77609 ) ; +#9666 = EDGE_LOOP ( 'NONE', ( #67973, #49373, #22969 ) ) ; +#9667 = VERTEX_POINT ( 'NONE', #66260 ) ; +#9668 = ORIENTED_EDGE ( 'NONE', *, *, #54436, .F. ) ; +#9669 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9670 = EDGE_LOOP ( 'NONE', ( #49204, #25716, #13675 ) ) ; +#9671 = VERTEX_POINT ( 'NONE', #53726 ) ; +#9672 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 60.34267608797601700, -28.20555803802997700 ) ) ; +#9673 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46381, #2900, #46668, #9423 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721650500, 0.0008252574424209598200 ), + .UNSPECIFIED. ) ; +#9674 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9675 = CARTESIAN_POINT ( 'NONE', ( -10.03177803894783100, 80.28233213024647300, -28.25051428653848300 ) ) ; +#9676 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 33.50000000000000700, 6.847000845227641200 ) ) ; +#9677 = CIRCLE ( 'NONE', #18781, 10.00000000000009600 ) ; +#9678 = AXIS2_PLACEMENT_3D ( 'NONE', #63243, #25982, #69464 ) ; +#9680 = EDGE_LOOP ( 'NONE', ( #50250, #64487, #56446 ) ) ; +#9679 = CARTESIAN_POINT ( 'NONE', ( -15.02627602454272600, 85.88244694415101300, -28.70555803803001600 ) ) ; +#9681 = CARTESIAN_POINT ( 'NONE', ( -3.976832725519379600, 39.08088969930749100, -28.30223898143227100 ) ) ; +#9682 = ORIENTED_EDGE ( 'NONE', *, *, #15669, .T. ) ; +#9683 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458391800, 18.58874248361071200, -28.53740755999533700 ) ) ; +#9684 = ORIENTED_EDGE ( 'NONE', *, *, #34434, .F. ) ; +#9685 = VERTEX_POINT ( 'NONE', #78511 ) ; +#9686 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#9687 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803803001300 ) ) ; +#9688 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004400, 39.69949493661175700, -28.70555803802995200 ) ) ; +#9689 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555802800, 61.87833896172640600, -28.53892303408239100 ) ) ; +#9690 = CONICAL_SURFACE ( 'NONE', #77600, 10.50000000000009600, 0.7853981633974500600 ) ; +#9691 = ORIENTED_EDGE ( 'NONE', *, *, #3369, .F. ) ; +#9692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9693 = AXIS2_PLACEMENT_3D ( 'NONE', #41464, #47690, #78757 ) ; +#9694 = VERTEX_POINT ( 'NONE', #29034 ) ; +#9695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34470, #71739, #3433, #46935 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907038046900E-007, 0.0006651184466340319700 ), + .UNSPECIFIED. ) ; +#9696 = ADVANCED_FACE ( 'NONE', ( #71665 ), #72513, .T. ) ; +#9697 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700700, 44.61903418172683900, -28.69431509262337700 ) ) ; +#9698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9699 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372569000, 36.93535825203924400, -28.53896444442197500 ) ) ; +#9700 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.79722425778844700, -28.32715733700493000 ) ) ; +#9701 = EDGE_CURVE ( 'NONE', #22950, #68070, #38508, .T. ) ; +#9702 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 68.00000000000000000, -1.205558038030002800 ) ) ; +#9703 = FACE_OUTER_BOUND ( 'NONE', #41255, .T. ) ; +#9704 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#9705 = VERTEX_POINT ( 'NONE', #60277 ) ; +#9706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9707 = ORIENTED_EDGE ( 'NONE', *, *, #37444, .F. ) ; +#9708 = CARTESIAN_POINT ( 'NONE', ( 17.22115791441229500, 20.43523632220588100, -28.30315276798564700 ) ) ; +#9709 = ADVANCED_FACE ( 'NONE', ( #55089 ), #36590, .F. ) ; +#9710 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9712 = CARTESIAN_POINT ( 'NONE', ( 16.33257079600105400, 34.47013982134319600, -28.62099087449130900 ) ) ; +#9713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9714 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725662200, 73.66464174796072900, -28.53896444442201000 ) ) ; +#9715 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9716 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146249800, 51.25732391202375700, -28.20555803803030800 ) ) ; +#9717 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9719 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, 70.10252595950221600, -28.26641963845903000 ) ) ; +#9720 = EDGE_CURVE ( 'NONE', #53532, #8588, #39752, .T. ) ; +#9721 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#9722 = CONICAL_SURFACE ( 'NONE', #1405, 10.00000000000009200, 0.7853981633974415100 ) ; +#9723 = ADVANCED_FACE ( 'NONE', ( #27906 ), #23001, .T. ) ; +#9724 = CONICAL_SURFACE ( 'NONE', #26482, 10.50000000000009900, 0.7853981633974518300 ) ; +#9725 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9726 = ORIENTED_EDGE ( 'NONE', *, *, #52495, .F. ) ; +#9727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38836, #13862, #7836, #51327 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247643720600, 0.0009605145132142018100 ), + .UNSPECIFIED. ) ; +#9728 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#9729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9731 = AXIS2_PLACEMENT_3D ( 'NONE', #68492, #31248, #74751 ) ; +#9732 = ORIENTED_EDGE ( 'NONE', *, *, #6877, .F. ) ; +#9733 = EDGE_CURVE ( 'NONE', #42291, #1580, #25323, .T. ) ; +#9734 = EDGE_CURVE ( 'NONE', #33338, #47662, #10852, .T. ) ; +#9735 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#9736 = ADVANCED_FACE ( 'NONE', ( #5463 ), #29831, .T. ) ; +#9737 = FACE_OUTER_BOUND ( 'NONE', #4917, .T. ) ; +#9739 = ORIENTED_EDGE ( 'NONE', *, *, #29659, .T. ) ; +#9738 = EDGE_CURVE ( 'NONE', #13603, #77643, #69691, .T. ) ; +#9740 = ORIENTED_EDGE ( 'NONE', *, *, #56918, .F. ) ; +#9741 = AXIS2_PLACEMENT_3D ( 'NONE', #18006, #61547, #24261 ) ; +#9742 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9743 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9744 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804090100, 83.65857157145700300, -28.37229765499284200 ) ) ; +#9745 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 5.166666666666681200, -4.152999154772358800 ) ) ; +#9746 = ORIENTED_EDGE ( 'NONE', *, *, #23281, .F. ) ; +#9747 = CONICAL_SURFACE ( 'NONE', #14166, 10.50000000000009600, 0.7853981633974518300 ) ; +#9748 = ORIENTED_EDGE ( 'NONE', *, *, #11634, .T. ) ; +#9749 = EDGE_LOOP ( 'NONE', ( #40528, #76237, #60350 ) ) ; +#9750 = VERTEX_POINT ( 'NONE', #5021 ) ; +#9751 = ORIENTED_EDGE ( 'NONE', *, *, #36895, .T. ) ; +#9753 = ORIENTED_EDGE ( 'NONE', *, *, #61957, .F. ) ; +#9752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9754 = VERTEX_POINT ( 'NONE', #42263 ) ; +#9755 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 39.50000000000000700, 2.454695999814385600 ) ) ; +#9756 = AXIS2_PLACEMENT_3D ( 'NONE', #69895, #32645, #76152 ) ; +#9757 = AXIS2_PLACEMENT_3D ( 'NONE', #47934, #10729, #54215 ) ; +#9758 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 90.13716795162648100, -28.48697406221665300 ) ) ; +#9759 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686867600, 71.58005252438383100, -28.24986299608864500 ) ) ; +#9760 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462194600, 90.20590598242353100, -28.39369363572387800 ) ) ; +#9761 = EDGE_CURVE ( 'NONE', #20847, #15543, #77152, .T. ) ; +#9762 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 4.500000000000014200, 4.650848422521016300 ) ) ; +#9763 = AXIS2_PLACEMENT_3D ( 'NONE', #31025, #74535, #37236 ) ; +#9764 = ORIENTED_EDGE ( 'NONE', *, *, #17951, .F. ) ; +#9765 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9766 = CIRCLE ( 'NONE', #10933, 10.00000000000009200 ) ; +#9767 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#9768 = ORIENTED_EDGE ( 'NONE', *, *, #70107, .F. ) ; +#9769 = EDGE_LOOP ( 'NONE', ( #62850, #57648, #500, #59649, #46895, #68045, #34059 ) ) ; +#9770 = CARTESIAN_POINT ( 'NONE', ( 7.258915720300087100, 44.45000000000001000, 3.611621613227304900 ) ) ; +#9771 = ORIENTED_EDGE ( 'NONE', *, *, #63101, .T. ) ; +#9772 = ORIENTED_EDGE ( 'NONE', *, *, #23541, .F. ) ; +#9773 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 41.83333333333333600, -12.20555803803000600 ) ) ; +#9774 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000900, 40.25227248018354900, -28.70555803802998100 ) ) ; +#9775 = VERTEX_POINT ( 'NONE', #48504 ) ; +#9776 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.16749699759768800, -28.20555803802992800 ) ) ; +#9777 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#9778 = CIRCLE ( 'NONE', #51914, 9.500000000000099500 ) ; +#9779 = EDGE_CURVE ( 'NONE', #10012, #44247, #57059, .T. ) ; +#9780 = AXIS2_PLACEMENT_3D ( 'NONE', #26890, #70381, #33133 ) ; +#9781 = ORIENTED_EDGE ( 'NONE', *, *, #37263, .F. ) ; +#9782 = AXIS2_PLACEMENT_3D ( 'NONE', #16960, #60484, #23212 ) ; +#9783 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#9784 = CARTESIAN_POINT ( 'NONE', ( 3.371418216713634000, 60.16749699759768800, -28.25056166218020700 ) ) ; +#9785 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4020, #22801, #41553, #4290 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972908969545700E-007, 0.0005865296644893776100 ), + .UNSPECIFIED. ) ; +#9786 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9787 = DIRECTION ( 'NONE', ( -2.523234146875355000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9788 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 46.72261628933269900, -28.70555803802996700 ) ) ; +#9789 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9790 = CIRCLE ( 'NONE', #20176, 10.50000000000009600 ) ; +#9791 = ORIENTED_EDGE ( 'NONE', *, *, #69164, .F. ) ; +#9792 = AXIS2_PLACEMENT_3D ( 'NONE', #44438, #7197, #50721 ) ; +#9793 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#9794 = ORIENTED_EDGE ( 'NONE', *, *, #16779, .T. ) ; +#9795 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#9796 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#9797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9798 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 87.94142842854296300, -28.20555803802997700 ) ) ; +#9799 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 21.97376207875059600, -28.70555803802995200 ) ) ; +#9800 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#9801 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9802 = AXIS2_PLACEMENT_3D ( 'NONE', #33171, #76671, #39411 ) ; +#9803 = FACE_OUTER_BOUND ( 'NONE', #34588, .T. ) ; +#9804 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 45.33333333333334300, 5.722645192245503900 ) ) ; +#9805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9806 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#9807 = ORIENTED_EDGE ( 'NONE', *, *, #61865, .T. ) ; +#9808 = ORIENTED_EDGE ( 'NONE', *, *, #58801, .T. ) ; +#9809 = VERTEX_POINT ( 'NONE', #79829 ) ; +#9810 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#9811 = ADVANCED_FACE ( 'NONE', ( #67750 ), #1547, .F. ) ; +#9812 = AXIS2_PLACEMENT_3D ( 'NONE', #7604, #7338, #75894 ) ; +#9813 = CARTESIAN_POINT ( 'NONE', ( 4.720766503058104700, 90.09951448976264000, -28.63282631410032100 ) ) ; +#9814 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9816 = CIRCLE ( 'NONE', #17966, 10.00000000000009400 ) ; +#9817 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#9818 = ORIENTED_EDGE ( 'NONE', *, *, #75594, .T. ) ; +#9819 = ORIENTED_EDGE ( 'NONE', *, *, #72234, .T. ) ; +#9820 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074528600, 10.78032162676624700, -28.55467576046985600 ) ) ; +#9821 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 53.66666666666667900, 2.794441961969992100 ) ) ; +#9822 = ADVANCED_FACE ( 'NONE', ( #34672 ), #49211, .T. ) ; +#9823 = CIRCLE ( 'NONE', #47959, 10.50000000000009600 ) ; +#9824 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9825 = ORIENTED_EDGE ( 'NONE', *, *, #70463, .F. ) ; +#9826 = EDGE_LOOP ( 'NONE', ( #7140, #78517, #56820 ) ) ; +#9827 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30504, #79994, #17441, #74022 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043640200, 0.007919184322923269000 ), + .UNSPECIFIED. ) ; +#9828 = VERTEX_POINT ( 'NONE', #80094 ) ; +#9829 = EDGE_LOOP ( 'NONE', ( #35536, #51952, #42249, #45817 ) ) ; +#9830 = ADVANCED_FACE ( 'NONE', ( #20076 ), #16170, .F. ) ; +#9831 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430200, 31.17701665379239600, -28.20555803802996000 ) ) ; +#9832 = EDGE_LOOP ( 'NONE', ( #26081, #24789, #6992 ) ) ; +#9833 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 10.50000000000002100, -7.061964498581016200 ) ) ; +#9834 = CARTESIAN_POINT ( 'NONE', ( 24.20951286179564500, 96.20464599719426200, -22.60497163336633600 ) ) ; +#9835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9837 = ADVANCED_FACE ( 'NONE', ( #51143 ), #63864, .T. ) ; +#9838 = CIRCLE ( 'NONE', #32253, 9.500000000000095900 ) ; +#9839 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.41070809551059300, -28.20555803802996700 ) ) ; +#9840 = ORIENTED_EDGE ( 'NONE', *, *, #75959, .F. ) ; +#9841 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 26.10073525436785500, -28.70555803802994200 ) ) ; +#9842 = ORIENTED_EDGE ( 'NONE', *, *, #31909, .F. ) ; +#9843 = EDGE_CURVE ( 'NONE', #7922, #11917, #62714, .T. ) ; +#9844 = ORIENTED_EDGE ( 'NONE', *, *, #59663, .T. ) ; +#9845 = ORIENTED_EDGE ( 'NONE', *, *, #57624, .F. ) ; +#9846 = CONICAL_SURFACE ( 'NONE', #64987, 10.50000000000009600, 0.7853981633974482800 ) ; +#9847 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 13.83333333333334800, 0.1341879241256075400 ) ) ; +#9848 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 60.37705528805136600, -28.20555803802997700 ) ) ; +#9849 = VERTEX_POINT ( 'NONE', #74124 ) ; +#9850 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462965300, 51.25732391202377200, -28.20555803803014400 ) ) ; +#9851 = EDGE_CURVE ( 'NONE', #63399, #29777, #7395, .T. ) ; +#9852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9853 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#9854 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.00000000000000700, -1.205558038030005300 ) ) ; +#9855 = ORIENTED_EDGE ( 'NONE', *, *, #47116, .F. ) ; +#9856 = EDGE_CURVE ( 'NONE', #10281, #45524, #65816, .T. ) ; +#9857 = AXIS2_PLACEMENT_3D ( 'NONE', #17608, #61130, #23862 ) ; +#9858 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#9859 = CIRCLE ( 'NONE', #16484, 10.00000000000009200 ) ; +#9860 = ORIENTED_EDGE ( 'NONE', *, *, #38071, .T. ) ; +#9861 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9862 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428614500, 77.92318720225485200, -28.70555803803047500 ) ) ; +#9863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9864 = AXIS2_PLACEMENT_3D ( 'NONE', #51724, #70526, #33274 ) ; +#9865 = EDGE_CURVE ( 'NONE', #70616, #21805, #53142, .T. ) ; +#9866 = EDGE_CURVE ( 'NONE', #68194, #57833, #32696, .T. ) ; +#9867 = EDGE_CURVE ( 'NONE', #65707, #43201, #48210, .T. ) ; +#9869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9868 = AXIS2_PLACEMENT_3D ( 'NONE', #2318, #8577, #39601 ) ; +#9870 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782499500, 51.43945992495499600, -28.34042301926905000 ) ) ; +#9871 = AXIS2_PLACEMENT_3D ( 'NONE', #28803, #34757, #35035 ) ; +#9872 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.22294471194861400, -28.20555803802997700 ) ) ; +#9873 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#9874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63415, #1352, #20154, #63682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648642342800E-007, 0.0007596411030280917300 ), + .UNSPECIFIED. ) ; +#9875 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9876 = ORIENTED_EDGE ( 'NONE', *, *, #18907, .T. ) ; +#9877 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#9878 = ORIENTED_EDGE ( 'NONE', *, *, #47861, .F. ) ; +#9879 = AXIS2_PLACEMENT_3D ( 'NONE', #43131, #80137, #80421 ) ; +#9880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9881 = VERTEX_POINT ( 'NONE', #55296 ) ; +#9882 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23057, #41790, #60597, #23308 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925599825900E-007, 0.0004431156063177133200 ), + .UNSPECIFIED. ) ; +#9883 = EDGE_CURVE ( 'NONE', #10288, #53604, #14213, .T. ) ; +#9884 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063281200, 10.09789380924897500, -28.25343951603327500 ) ) ; +#9885 = AXIS2_PLACEMENT_3D ( 'NONE', #67113, #29894, #73379 ) ; +#9886 = AXIS2_PLACEMENT_3D ( 'NONE', #45451, #51443, #26233 ) ; +#9887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9888 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49950, #216, #75025, #37727 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278954310100, 0.001517194977238316700 ), + .UNSPECIFIED. ) ; +#9889 = FACE_OUTER_BOUND ( 'NONE', #163, .T. ) ; +#9890 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#9891 = VERTEX_POINT ( 'NONE', #18056 ) ; +#9892 = CARTESIAN_POINT ( 'NONE', ( -23.78687171869884100, 99.88419609316659400, -23.50384982545476500 ) ) ; +#9893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9894 = EDGE_LOOP ( 'NONE', ( #70774, #1362, #25030, #50998 ) ) ; +#9895 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 90.34267608797603100, -28.20555803802997700 ) ) ; +#9896 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9897 = EDGE_LOOP ( 'NONE', ( #73945, #28993, #43818, #3232 ) ) ; +#9898 = FACE_OUTER_BOUND ( 'NONE', #13453, .T. ) ; +#9899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9900 = EDGE_LOOP ( 'NONE', ( #61069, #60128, #7191 ) ) ; +#9901 = AXIS2_PLACEMENT_3D ( 'NONE', #75886, #38588, #1338 ) ; +#9903 = EDGE_LOOP ( 'NONE', ( #15600, #71856, #75381 ) ) ; +#9902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#9904 = ORIENTED_EDGE ( 'NONE', *, *, #15968, .T. ) ; +#9905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9907 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9908 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24788, #31048, #6279, #49767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951569742400E-007, 0.0002673660010786767000 ), + .UNSPECIFIED. ) ; +#9909 = VECTOR ( 'NONE', #45671, 1000.000000000000000 ) ; +#9910 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 65.79999999999999700, -28.70525300642875200 ) ) ; +#9911 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#9912 = AXIS2_PLACEMENT_3D ( 'NONE', #32920, #76427, #39156 ) ; +#9913 = ORIENTED_EDGE ( 'NONE', *, *, #70645, .T. ) ; +#9914 = FACE_OUTER_BOUND ( 'NONE', #23899, .T. ) ; +#9915 = VERTEX_POINT ( 'NONE', #74106 ) ; +#9916 = ORIENTED_EDGE ( 'NONE', *, *, #8399, .F. ) ; +#9917 = ORIENTED_EDGE ( 'NONE', *, *, #30387, .F. ) ; +#9918 = ORIENTED_EDGE ( 'NONE', *, *, #12465, .T. ) ; +#9919 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 76.76150692817330400, -28.68631150211663400 ) ) ; +#9920 = CONICAL_SURFACE ( 'NONE', #28922, 10.00000000000009400, 0.7853981633974447300 ) ; +#9921 = ORIENTED_EDGE ( 'NONE', *, *, #8339, .T. ) ; +#9922 = ADVANCED_FACE ( 'NONE', ( #47265 ), #12269, .T. ) ; +#9923 = CIRCLE ( 'NONE', #18014, 10.50000000000009800 ) ; +#9924 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 60.00000000000002100, 6.794441961969995200 ) ) ; +#9925 = AXIS2_PLACEMENT_3D ( 'NONE', #12211, #43179, #24710 ) ; +#9926 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53429, #59437, #59982, #22708 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004749699300E-007, 0.0004089065559708800200 ), + .UNSPECIFIED. ) ; +#9927 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530500, 24.23212903577623200, -28.37244029424742200 ) ) ; +#9928 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9929 = ADVANCED_FACE ( 'NONE', ( #80397 ), #59967, .T. ) ; +#9930 = EDGE_CURVE ( 'NONE', #14016, #9775, #33774, .T. ) ; +#9931 = ORIENTED_EDGE ( 'NONE', *, *, #72600, .T. ) ; +#9932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9933 = AXIS2_PLACEMENT_3D ( 'NONE', #74581, #18544, #43270 ) ; +#9934 = CIRCLE ( 'NONE', #72733, 9.500000000000095900 ) ; +#9935 = ORIENTED_EDGE ( 'NONE', *, *, #50358, .F. ) ; +#9937 = ORIENTED_EDGE ( 'NONE', *, *, #25660, .F. ) ; +#9936 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9938 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448975300, 54.16666666666667900, -9.205558038030005700 ) ) ; +#9939 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922500300, 90.09037803491499100, -28.29483400905889200 ) ) ; +#9940 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#9941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9942 = ADVANCED_FACE ( 'NONE', ( #45296 ), #26860, .F. ) ; +#9943 = PLANE ( 'NONE', #46982 ) ; +#9944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9945 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506408400, 20.51912043132477900, -28.30223257055572700 ) ) ; +#9946 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 31.33333333333333600, -10.73183747965883100 ) ) ; +#9947 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#9948 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9949 = EDGE_CURVE ( 'NONE', #75998, #37756, #76476, .T. ) ; +#9950 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.23796787468682400, -28.38801640354855800 ) ) ; +#9951 = EDGE_CURVE ( 'NONE', #77938, #65478, #78467, .T. ) ; +#9952 = ORIENTED_EDGE ( 'NONE', *, *, #63742, .T. ) ; +#9953 = PLANE ( 'NONE', #79822 ) ; +#9954 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.20037755566822600, -28.53664883431610000 ) ) ; +#9955 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9957 = ORIENTED_EDGE ( 'NONE', *, *, #19362, .F. ) ; +#9956 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714283800, 57.92318720225497900, -28.70555803802997700 ) ) ; +#9958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9959 = EDGE_CURVE ( 'NONE', #21498, #76953, #19306, .T. ) ; +#9960 = EDGE_CURVE ( 'NONE', #21940, #42951, #30767, .T. ) ; +#9961 = FACE_OUTER_BOUND ( 'NONE', #65929, .T. ) ; +#9962 = ORIENTED_EDGE ( 'NONE', *, *, #18427, .T. ) ; +#9963 = AXIS2_PLACEMENT_3D ( 'NONE', #17974, #30503, #74015 ) ; +#9964 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714800, 49.85339758437810100, -28.20555803802996700 ) ) ; +#9965 = CIRCLE ( 'NONE', #20144, 9.500000000000097700 ) ; +#9966 = ORIENTED_EDGE ( 'NONE', *, *, #52610, .F. ) ; +#9967 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 65.83333333333332900, 0.1341879241256075400 ) ) ; +#9968 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 79.91070809551074200, -28.20555803803030800 ) ) ; +#9969 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9970 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#9971 = FACE_OUTER_BOUND ( 'NONE', #72455, .T. ) ; +#9972 = EDGE_LOOP ( 'NONE', ( #28613, #29235, #27186, #15308, #54236 ) ) ; +#9973 = ORIENTED_EDGE ( 'NONE', *, *, #51248, .T. ) ; +#9974 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174864400, 90.16054007504448000, -28.34042301926892500 ) ) ; +#9975 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.23796787468682400, -28.38801640354855800 ) ) ; +#9976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9977 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9978 = CARTESIAN_POINT ( 'NONE', ( -10.42773891679285600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#9979 = AXIS2_PLACEMENT_3D ( 'NONE', #57410, #32391, #63692 ) ; +#9980 = FACE_OUTER_BOUND ( 'NONE', #73428, .T. ) ; +#9981 = EDGE_CURVE ( 'NONE', #50238, #36405, #4846, .T. ) ; +#9982 = EDGE_CURVE ( 'NONE', #54919, #43060, #61913, .T. ) ; +#9983 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999971100, 89.81066373133491300, -28.53923937255183000 ) ) ; +#9984 = EDGE_CURVE ( 'NONE', #41714, #57368, #71170, .T. ) ; +#9985 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477648800, 80.38589569235172400, -28.27354076558380000 ) ) ; +#9986 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#9987 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29284, #60251, #10745, #54234 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331884803000 ), + .UNSPECIFIED. ) ; +#9988 = ORIENTED_EDGE ( 'NONE', *, *, #80255, .T. ) ; +#9989 = CARTESIAN_POINT ( 'NONE', ( -2.769188246343379700, 60.94994472024602300, -28.43636979168685400 ) ) ; +#9990 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747181000, 18.13131911501876200, -28.51286550264506300 ) ) ; +#9991 = FACE_OUTER_BOUND ( 'NONE', #9466, .T. ) ; +#9992 = AXIS2_PLACEMENT_3D ( 'NONE', #28916, #59890, #22609 ) ; +#9993 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 20.46868088498121800, -28.51286550264510200 ) ) ; +#9994 = ORIENTED_EDGE ( 'NONE', *, *, #46773, .F. ) ; +#9995 = ORIENTED_EDGE ( 'NONE', *, *, #56584, .F. ) ; +#9996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9997 = ORIENTED_EDGE ( 'NONE', *, *, #49018, .F. ) ; +#9998 = FACE_OUTER_BOUND ( 'NONE', #48660, .T. ) ; +#9999 = ORIENTED_EDGE ( 'NONE', *, *, #60834, .T. ) ; +#10000 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#10001 = EDGE_CURVE ( 'NONE', #2750, #50416, #56702, .T. ) ; +#10002 = CIRCLE ( 'NONE', #40884, 10.50000000000009600 ) ; +#10003 = AXIS2_PLACEMENT_3D ( 'NONE', #41462, #72759, #53960 ) ; +#10004 = AXIS2_PLACEMENT_3D ( 'NONE', #46960, #53243, #3453 ) ; +#10005 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10006 = ORIENTED_EDGE ( 'NONE', *, *, #36520, .T. ) ; +#10007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47211, #16258, #35038, #78560 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972906697037800E-007, 0.0005865296644891605500 ), + .UNSPECIFIED. ) ; +#10008 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10009 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510923200, 30.62856921007283300, -28.37063977681168200 ) ) ; +#10010 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 70.69966441803886400, -28.70555803803014400 ) ) ; +#10011 = ADVANCED_FACE ( 'NONE', ( #74543 ), #64038, .T. ) ; +#10012 = VERTEX_POINT ( 'NONE', #45195 ) ; +#10013 = ORIENTED_EDGE ( 'NONE', *, *, #61564, .T. ) ; +#10014 = PLANE ( 'NONE', #58452 ) ; +#10015 = CONICAL_SURFACE ( 'NONE', #60695, 10.50000000000009600, 0.7853981633974518300 ) ; +#10016 = CARTESIAN_POINT ( 'NONE', ( -15.82622038785832400, 55.79999999999999000, -28.34928911331532900 ) ) ; +#10017 = ORIENTED_EDGE ( 'NONE', *, *, #72345, .T. ) ; +#10018 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 3.000000000000023100, -1.205558038030002800 ) ) ; +#10019 = CIRCLE ( 'NONE', #1893, 10.50000000000009600 ) ; +#10020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52629, #9105, #65204, #27944 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185113200, 0.001517199873936353700 ), + .UNSPECIFIED. ) ; +#10021 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#10022 = ADVANCED_FACE ( 'NONE', ( #10312 ), #56024, .F. ) ; +#10023 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 37.33333333333334300, -3.705558038030004400 ) ) ; +#10024 = AXIS2_PLACEMENT_3D ( 'NONE', #53125, #15875, #59401 ) ; +#10025 = CARTESIAN_POINT ( 'NONE', ( -2.279102202939593500, 71.50050326225950000, -28.63287226700111500 ) ) ; +#10026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73318, #29834, #67055, #79567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354231323200E-007, 0.0003902800319294237400 ), + .UNSPECIFIED. ) ; +#10027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10028 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 2.333333333333340100, -5.205558038030008400 ) ) ; +#10029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10030 = CARTESIAN_POINT ( 'NONE', ( 8.710999237226275200, 44.44999999999999600, -4.519015594081206900 ) ) ; +#10031 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571436800, 51.52858243452106300, -28.70555803802997700 ) ) ; +#10032 = EDGE_CURVE ( 'NONE', #5879, #74434, #42223, .T. ) ; +#10033 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 39.66666666666667100, 8.320721403598824400 ) ) ; +#10034 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032400, 30.94069092601377900, -28.35186440610858200 ) ) ; +#10035 = ORIENTED_EDGE ( 'NONE', *, *, #31556, .T. ) ; +#10036 = AXIS2_PLACEMENT_3D ( 'NONE', #28753, #72247, #34980 ) ; +#10037 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 41.43250300240230600, -28.20555803802997700 ) ) ; +#10038 = ORIENTED_EDGE ( 'NONE', *, *, #78393, .F. ) ; +#10039 = AXIS2_PLACEMENT_3D ( 'NONE', #42738, #5499, #48971 ) ; +#10040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10041 = VERTEX_POINT ( 'NONE', #33270 ) ; +#10042 = ADVANCED_FACE ( 'NONE', ( #57990 ), #58018, .T. ) ; +#10043 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416072600, 30.51125751638927900, -28.53740755999535500 ) ) ; +#10044 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#10045 = CIRCLE ( 'NONE', #33438, 10.00000000000009200 ) ; +#10046 = ORIENTED_EDGE ( 'NONE', *, *, #17532, .F. ) ; +#10047 = FACE_OUTER_BOUND ( 'NONE', #79758, .T. ) ; +#10048 = AXIS2_PLACEMENT_3D ( 'NONE', #73947, #36650, #80187 ) ; +#10049 = EDGE_LOOP ( 'NONE', ( #60777, #24200, #31394, #35460 ) ) ; +#10050 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10051 = CARTESIAN_POINT ( 'NONE', ( -3.959731041493567400, 20.37561462481247400, -28.30309985153374800 ) ) ; +#10052 = ORIENTED_EDGE ( 'NONE', *, *, #3888, .F. ) ; +#10053 = CONICAL_SURFACE ( 'NONE', #63196, 10.50000000000009400, 0.7853981633974500600 ) ; +#10054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10055 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10056 = ORIENTED_EDGE ( 'NONE', *, *, #80705, .T. ) ; +#10057 = CARTESIAN_POINT ( 'NONE', ( -8.272691540716730100, 65.79999999999998300, -28.53979898350160100 ) ) ; +#10058 = CARTESIAN_POINT ( 'NONE', ( -14.05953275178616500, 9.743257667615466700, -28.70293744553715600 ) ) ; +#10059 = ORIENTED_EDGE ( 'NONE', *, *, #28000, .T. ) ; +#10060 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849359200, 41.32033471810039800, -28.30868034705246900 ) ) ; +#10061 = CARTESIAN_POINT ( 'NONE', ( -4.469863111190365500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#10062 = VERTEX_POINT ( 'NONE', #45736 ) ; +#10063 = CARTESIAN_POINT ( 'NONE', ( -2.438174915909119300, 30.98385710212512100, -28.57719681746177500 ) ) ; +#10064 = CONICAL_SURFACE ( 'NONE', #76962, 10.00000000000009200, 0.7853981633974447300 ) ; +#10065 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45100, #1624, #63949, #26678 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217704504487900E-007, 0.0008482615949371708200 ), + .UNSPECIFIED. ) ; +#10066 = FACE_OUTER_BOUND ( 'NONE', #60407, .T. ) ; +#10067 = CARTESIAN_POINT ( 'NONE', ( -17.03295546792553900, 58.40241253122519500, -28.49829281932970600 ) ) ; +#10068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10069 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484569000, 51.01872124563919900, -28.53757464917570300 ) ) ; +#10070 = EDGE_LOOP ( 'NONE', ( #20743, #77683, #65729, #57379 ) ) ; +#10071 = CIRCLE ( 'NONE', #54532, 10.00000000000009200 ) ; +#10072 = EDGE_CURVE ( 'NONE', #46777, #816, #27824, .T. ) ; +#10073 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 43.16666666666669300, -9.205558038030003900 ) ) ; +#10074 = ORIENTED_EDGE ( 'NONE', *, *, #59058, .F. ) ; +#10075 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858902700, 87.92318720225479500, -28.70555803802997700 ) ) ; +#10077 = EDGE_CURVE ( 'NONE', #71905, #46957, #24906, .T. ) ; +#10076 = ORIENTED_EDGE ( 'NONE', *, *, #66840, .F. ) ; +#10078 = ORIENTED_EDGE ( 'NONE', *, *, #20220, .T. ) ; +#10079 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390037600, 60.13716795162663000, -28.48697406221648600 ) ) ; +#10080 = ORIENTED_EDGE ( 'NONE', *, *, #74376, .T. ) ; +#10081 = CONICAL_SURFACE ( 'NONE', #37164, 10.00000000000009400, 0.7853981633974447300 ) ; +#10082 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956800, 61.96823913367188700, -28.70555803803030800 ) ) ; +#10083 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091598500, 27.02574874835214700, -28.70555803803001300 ) ) ; +#10084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10085 = VERTEX_POINT ( 'NONE', #70790 ) ; +#10086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10087 = CARTESIAN_POINT ( 'NONE', ( 1.738029347723712300, 57.15000000000001300, 6.818620712643326700 ) ) ; +#10088 = EDGE_CURVE ( 'NONE', #11954, #34842, #8321, .T. ) ; +#10089 = ORIENTED_EDGE ( 'NONE', *, *, #21555, .T. ) ; +#10090 = ORIENTED_EDGE ( 'NONE', *, *, #79689, .F. ) ; +#10091 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#10092 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10093 = EDGE_CURVE ( 'NONE', #76759, #36626, #13348, .T. ) ; +#10094 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 55.83333333333334300, -3.349151577478984600 ) ) ; +#10095 = EDGE_CURVE ( 'NONE', #9881, #65404, #79649, .T. ) ; +#10096 = ORIENTED_EDGE ( 'NONE', *, *, #47222, .T. ) ; +#10097 = FACE_OUTER_BOUND ( 'NONE', #2237, .T. ) ; +#10098 = CARTESIAN_POINT ( 'NONE', ( -17.84490107316163000, 8.577549463419190400, -28.31212251124067700 ) ) ; +#10099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10100 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#10101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10102 = AXIS2_PLACEMENT_3D ( 'NONE', #25893, #69382, #32128 ) ; +#10103 = EDGE_CURVE ( 'NONE', #37752, #33110, #41443, .T. ) ; +#10104 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68320, #43544, #62350, #25080 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100398847000, 0.001249956855146005000 ), + .UNSPECIFIED. ) ; +#10105 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715600, 70.34267608797551900, -28.20555803803014400 ) ) ; +#10106 = EDGE_CURVE ( 'NONE', #75236, #60591, #65224, .T. ) ; +#10107 = EDGE_CURVE ( 'NONE', #15453, #56951, #72609, .T. ) ; +#10108 = CARTESIAN_POINT ( 'NONE', ( 8.783306465195760600, 70.79999999999982700, -28.32841359973453900 ) ) ; +#10109 = ADVANCED_FACE ( 'NONE', ( #43372 ), #34074, .T. ) ; +#10110 = AXIS2_PLACEMENT_3D ( 'NONE', #28716, #40905, #9896 ) ; +#10111 = CIRCLE ( 'NONE', #49214, 9.500000000000099500 ) ; +#10112 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972652900, 69.37488905616153500, -28.55192314908427100 ) ) ; +#10113 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79573, #79845, #17831, #61371 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374279291000, 0.0005468822770172032800 ), + .UNSPECIFIED. ) ; +#10114 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345425700, 51.32559822014179900, -28.29986836858017800 ) ) ; +#10115 = ORIENTED_EDGE ( 'NONE', *, *, #60147, .F. ) ; +#10116 = ADVANCED_FACE ( 'NONE', ( #39479 ), #4447, .T. ) ; +#10117 = AXIS2_PLACEMENT_3D ( 'NONE', #43762, #62564, #24771 ) ; +#10118 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 11.66666666666668000, -3.705558038030004400 ) ) ; +#10119 = AXIS2_PLACEMENT_3D ( 'NONE', #3455, #28275, #21729 ) ; +#10120 = ORIENTED_EDGE ( 'NONE', *, *, #68720, .F. ) ; +#10121 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#10122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10123 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 51.83333333333330700, -3.349151577478984600 ) ) ; +#10124 = CIRCLE ( 'NONE', #42234, 10.00000000000009400 ) ; +#10125 = VERTEX_POINT ( 'NONE', #59368 ) ; +#10126 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609824300, 51.46283204837368400, -28.48697406221626200 ) ) ; +#10127 = FACE_OUTER_BOUND ( 'NONE', #12282, .T. ) ; +#10128 = ORIENTED_EDGE ( 'NONE', *, *, #8085, .F. ) ; +#10129 = ADVANCED_FACE ( 'NONE', ( #21019 ), #53089, .T. ) ; +#10130 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10131 = CONICAL_SURFACE ( 'NONE', #26140, 10.00000000000009200, 0.7853981633974447300 ) ; +#10132 = CONICAL_SURFACE ( 'NONE', #54415, 10.00000000000009200, 0.7853981633974447300 ) ; +#10133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10134 = ORIENTED_EDGE ( 'NONE', *, *, #48053, .T. ) ; +#10135 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#10136 = VERTEX_POINT ( 'NONE', #22113 ) ; +#10137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10138 = ORIENTED_EDGE ( 'NONE', *, *, #13642, .F. ) ; +#10139 = AXIS2_PLACEMENT_3D ( 'NONE', #13110, #19336, #50313 ) ; +#10140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10141 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#10142 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3532, #59598, #59874, #22591 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217707453274800E-007, 0.0008482615949368355800 ), + .UNSPECIFIED. ) ; +#10143 = ADVANCED_FACE ( 'NONE', ( #37507 ), #35607, .T. ) ; +#10144 = CONICAL_SURFACE ( 'NONE', #79007, 10.00000000000009400, 0.7853981633974447300 ) ; +#10145 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387503600, 75.13282980700456900, -28.53914313452793300 ) ) ; +#10146 = ORIENTED_EDGE ( 'NONE', *, *, #36750, .T. ) ; +#10147 = CIRCLE ( 'NONE', #46641, 2.499999999999998700 ) ; +#10148 = VERTEX_POINT ( 'NONE', #53377 ) ; +#10149 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 90.29722425778841500, -28.32715733700494500 ) ) ; +#10150 = EDGE_CURVE ( 'NONE', #44518, #57892, #22954, .T. ) ; +#10151 = ORIENTED_EDGE ( 'NONE', *, *, #11853, .T. ) ; +#10152 = ORIENTED_EDGE ( 'NONE', *, *, #19362, .T. ) ; +#10153 = CARTESIAN_POINT ( 'NONE', ( -1.786765180256111300E-013, 64.37738371066707500, -28.70555803802997700 ) ) ; +#10154 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544433500, 59.72166103827275000, -28.53892303408279200 ) ) ; +#10155 = AXIS2_PLACEMENT_3D ( 'NONE', #30724, #74508, #37214 ) ; +#10156 = ORIENTED_EDGE ( 'NONE', *, *, #77596, .F. ) ; +#10157 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10158 = VERTEX_POINT ( 'NONE', #65913 ) ; +#10159 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10160 = CONICAL_SURFACE ( 'NONE', #45976, 10.00000000000009200, 0.7853981633974447300 ) ; +#10161 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10162 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528900, 45.86787096422379800, -28.37244029424746800 ) ) ; +#10163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10164 = ORIENTED_EDGE ( 'NONE', *, *, #72764, .F. ) ; +#10165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69818, #26346, #7787, #51276 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927619800 ), + .UNSPECIFIED. ) ; +#10168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10169 = EDGE_LOOP ( 'NONE', ( #70612, #17022, #51533, #57369 ) ) ; +#10170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10172 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#10173 = AXIS2_PLACEMENT_3D ( 'NONE', #19146, #19968, #56401 ) ; +#10174 = EDGE_LOOP ( 'NONE', ( #79444, #44648, #53743, #59777 ) ) ; +#10175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10176 = ORIENTED_EDGE ( 'NONE', *, *, #5800, .F. ) ; +#10177 = CONICAL_SURFACE ( 'NONE', #70028, 10.00000000000009200, 0.7853981633974447300 ) ; +#10178 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#10179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10180 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198452400, 70.90033558196107300, -28.70555803802997700 ) ) ; +#10181 = CARTESIAN_POINT ( 'NONE', ( 9.695954216608885900, 80.13716795162622500, -28.48697406221719300 ) ) ; +#10182 = AXIS2_PLACEMENT_3D ( 'NONE', #38578, #1332, #44819 ) ; +#10183 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489667300, 9.940690926013793700, -28.35186440610855000 ) ) ; +#10184 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#10185 = EDGE_CURVE ( 'NONE', #26714, #51876, #50694, .T. ) ; +#10186 = CIRCLE ( 'NONE', #52779, 10.00000000000009200 ) ; +#10187 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39432, #45651, #20970, #64506 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710634100, 0.0008082646680357292200 ), + .UNSPECIFIED. ) ; +#10188 = EDGE_LOOP ( 'NONE', ( #57312, #28845, #50138 ) ) ; +#10189 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 57.83333333333331400, -9.205558038030003900 ) ) ; +#10190 = ORIENTED_EDGE ( 'NONE', *, *, #1228, .F. ) ; +#10191 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510618300, 9.940690926013793700, -28.35186440610865300 ) ) ; +#10193 = ORIENTED_EDGE ( 'NONE', *, *, #57961, .F. ) ; +#10192 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10194 = ADVANCED_FACE ( 'NONE', ( #68683 ), #66750, .T. ) ; +#10195 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 87.70389005397393600, -28.37519436813182900 ) ) ; +#10196 = CONICAL_SURFACE ( 'NONE', #51037, 10.50000000000009400, 0.7853981633974500600 ) ; +#10197 = CONICAL_SURFACE ( 'NONE', #13251, 10.50000000000009200, 0.7853981633974482800 ) ; +#10198 = EDGE_CURVE ( 'NONE', #67366, #22950, #38245, .T. ) ; +#10199 = ORIENTED_EDGE ( 'NONE', *, *, #1494, .T. ) ; +#10200 = EDGE_CURVE ( 'NONE', #16236, #64447, #23845, .T. ) ; +#10201 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 52.00000000000002800, 6.794441961969996900 ) ) ; +#10202 = ORIENTED_EDGE ( 'NONE', *, *, #49836, .T. ) ; +#10203 = CONICAL_SURFACE ( 'NONE', #26628, 10.00000000000009400, 0.7853981633974447300 ) ; +#10204 = CONICAL_SURFACE ( 'NONE', #46514, 10.50000000000009600, 0.7853981633974500600 ) ; +#10205 = EDGE_LOOP ( 'NONE', ( #49433, #31179, #60895 ) ) ; +#10206 = ORIENTED_EDGE ( 'NONE', *, *, #36895, .F. ) ; +#10207 = ADVANCED_FACE ( 'NONE', ( #52095 ), #33641, .T. ) ; +#10208 = AXIS2_PLACEMENT_3D ( 'NONE', #53661, #72458, #65668 ) ; +#10209 = EDGE_CURVE ( 'NONE', #19509, #68516, #50145, .T. ) ; +#10210 = EDGE_CURVE ( 'NONE', #35438, #30740, #9347, .T. ) ; +#10211 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019289100, 76.79999999999944300, -28.70555803803047500 ) ) ; +#10212 = EDGE_CURVE ( 'NONE', #11162, #17421, #75666, .T. ) ; +#10213 = CARTESIAN_POINT ( 'NONE', ( 10.98575180313114300, 90.01994747561654700, -28.24986299608907500 ) ) ; +#10214 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10217 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 29.16666666666667100, 9.794441961969994300 ) ) ; +#10218 = CONICAL_SURFACE ( 'NONE', #7003, 10.50000000000009600, 0.7853981633974500600 ) ; +#10219 = EDGE_CURVE ( 'NONE', #46932, #79921, #61251, .T. ) ; +#10220 = ORIENTED_EDGE ( 'NONE', *, *, #24507, .F. ) ; +#10221 = AXIS2_PLACEMENT_3D ( 'NONE', #15153, #58661, #21433 ) ; +#10222 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655605600, 38.92298334620759400, -28.20555803802996000 ) ) ; +#10223 = CIRCLE ( 'NONE', #63851, 10.50000000000009600 ) ; +#10224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10225 = ORIENTED_EDGE ( 'NONE', *, *, #35983, .F. ) ; +#10226 = ADVANCED_FACE ( 'NONE', ( #6397 ), #29479, .T. ) ; +#10227 = ORIENTED_EDGE ( 'NONE', *, *, #42612, .T. ) ; +#10228 = ORIENTED_EDGE ( 'NONE', *, *, #67337, .T. ) ; +#10229 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10230 = CARTESIAN_POINT ( 'NONE', ( -11.46986311119036400, 9.146957350529760300, -28.66910751791843700 ) ) ; +#10231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10232 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343256600, 18.35339758437769200, -28.20555803803025800 ) ) ; +#10234 = ADVANCED_FACE ( 'NONE', ( #2478 ), #48202, .T. ) ; +#10233 = ORIENTED_EDGE ( 'NONE', *, *, #40449, .T. ) ; +#10235 = CIRCLE ( 'NONE', #38119, 10.00000000000009200 ) ; +#10236 = AXIS2_PLACEMENT_3D ( 'NONE', #78797, #29054, #4234 ) ; +#10237 = ORIENTED_EDGE ( 'NONE', *, *, #22864, .F. ) ; +#10238 = CARTESIAN_POINT ( 'NONE', ( 10.12141251449988900, 79.83662311806178000, -28.37223523914902000 ) ) ; +#10239 = AXIS2_PLACEMENT_3D ( 'NONE', #39577, #45799, #76837 ) ; +#10240 = ORIENTED_EDGE ( 'NONE', *, *, #70853, .T. ) ; +#10241 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55183, #11700, #24206, #67711 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286303202100E-007, 0.0007303759720926886900 ), + .UNSPECIFIED. ) ; +#10242 = ADVANCED_FACE ( 'NONE', ( #521 ), #70622, .T. ) ; +#10243 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#10244 = CARTESIAN_POINT ( 'NONE', ( 15.05230528786095500, 85.75869881725272100, -28.70545453106903000 ) ) ; +#10245 = ORIENTED_EDGE ( 'NONE', *, *, #63032, .T. ) ; +#10246 = VERTEX_POINT ( 'NONE', #48424 ) ; +#10247 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10248 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 63.66666666666665700, -3.705558038030004400 ) ) ; +#10249 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 83.67681279774500100, -28.70555803802997700 ) ) ; +#10250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10251 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 71.22294471194861400, -28.20555803803047800 ) ) ; +#10252 = ORIENTED_EDGE ( 'NONE', *, *, #34288, .T. ) ; +#10253 = CONICAL_SURFACE ( 'NONE', #2220, 10.50000000000009600, 0.7853981633974500600 ) ; +#10254 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528136700, 41.46868088498121800, -28.51286550264512700 ) ) ; +#10255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10256 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925639200, 38.31967837323417600, -28.55467576046955400 ) ) ; +#10257 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192889600, 86.79999999999959900, -28.70555803803030800 ) ) ; +#10258 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10259 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#10260 = EDGE_CURVE ( 'NONE', #79804, #8272, #54081, .T. ) ; +#10261 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#10262 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#10263 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875026700, 85.13282980700491000, -28.53914313452768100 ) ) ; +#10264 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 57.22261628933269200, -28.70555803802997700 ) ) ; +#10265 = CARTESIAN_POINT ( 'NONE', ( 16.44673298322653900, 70.11613117245407500, -28.57420149390117800 ) ) ; +#10266 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823698900, 27.69543746431598000, -28.61277292027076100 ) ) ; +#10267 = FACE_OUTER_BOUND ( 'NONE', #26048, .T. ) ; +#10268 = EDGE_CURVE ( 'NONE', #74705, #48902, #46728, .T. ) ; +#10269 = AXIS2_PLACEMENT_3D ( 'NONE', #61193, #79665, #54908 ) ; +#10270 = AXIS2_PLACEMENT_3D ( 'NONE', #29979, #79714, #67208 ) ; +#10271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10272 = ORIENTED_EDGE ( 'NONE', *, *, #19003, .F. ) ; +#10273 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 88.16545993132804400, -28.70555803803024400 ) ) ; +#10274 = CIRCLE ( 'NONE', #64039, 10.00000000000009200 ) ; +#10275 = CARTESIAN_POINT ( 'NONE', ( -5.383156030193842600, 86.79999999999785100, -28.70555803802997700 ) ) ; +#10277 = ORIENTED_EDGE ( 'NONE', *, *, #31557, .T. ) ; +#10276 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344544500, 10.17701665379220800, -28.20555803802993500 ) ) ; +#10278 = CONICAL_SURFACE ( 'NONE', #51516, 10.00000000000009200, 0.7853981633974447300 ) ; +#10279 = AXIS2_PLACEMENT_3D ( 'NONE', #67350, #30122, #73609 ) ; +#10280 = FACE_OUTER_BOUND ( 'NONE', #74918, .T. ) ; +#10281 = VERTEX_POINT ( 'NONE', #73483 ) ; +#10282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10283 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 71.46283204837338600, -28.48697406221667400 ) ) ; +#10284 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 47.42318720225497200, -28.70555803802996700 ) ) ; +#10285 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 0.8333333333333370300, 1.741883078712340300 ) ) ; +#10286 = CIRCLE ( 'NONE', #35444, 10.50000000000009600 ) ; +#10287 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32052, #69306, #75556, #38269 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810935700, 0.0005317208426589199200 ), + .UNSPECIFIED. ) ; +#10288 = VERTEX_POINT ( 'NONE', #54707 ) ; +#10289 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10290 = ORIENTED_EDGE ( 'NONE', *, *, #16993, .F. ) ; +#10291 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 35.16666666666667100, 0.1341879241256129200 ) ) ; +#10292 = AXIS2_PLACEMENT_3D ( 'NONE', #80386, #43101, #5868 ) ; +#10293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10294 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489641100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#10296 = CIRCLE ( 'NONE', #78017, 10.00000000000009400 ) ; +#10295 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#10297 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 0.1666666666666910300, 0.9380355014189834000 ) ) ; +#10298 = CONICAL_SURFACE ( 'NONE', #11686, 10.00000000000009600, 0.7853981633974482800 ) ; +#10299 = CARTESIAN_POINT ( 'NONE', ( 16.44668611327847400, 51.48387403443024400, -28.57421789838284800 ) ) ; +#10300 = ORIENTED_EDGE ( 'NONE', *, *, #52471, .T. ) ; +#10301 = EDGE_CURVE ( 'NONE', #37852, #14833, #32300, .T. ) ; +#10302 = EDGE_LOOP ( 'NONE', ( #70312, #37147, #63901, #73506 ) ) ; +#10303 = CARTESIAN_POINT ( 'NONE', ( 3.797271478512712900, 44.45000000000000300, -9.909198200408656700 ) ) ; +#10304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10305 = EDGE_LOOP ( 'NONE', ( #15127, #20003, #17180, #26625 ) ) ; +#10306 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 37.50000000000000700, -9.258116921287651700 ) ) ; +#10307 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019500, 51.43250300240212200, -28.20555803803014400 ) ) ; +#10308 = ORIENTED_EDGE ( 'NONE', *, *, #29788, .F. ) ; +#10309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10310 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#10311 = VERTEX_POINT ( 'NONE', #67491 ) ; +#10312 = FACE_OUTER_BOUND ( 'NONE', #76122, .T. ) ; +#10313 = ORIENTED_EDGE ( 'NONE', *, *, #77760, .F. ) ; +#10314 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000044200, 16.62623792124928500, -28.70555803803042500 ) ) ; +#10315 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.62753447840929500, -28.38801640354893500 ) ) ; +#10316 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205878000, 28.58245724453602700, -28.27504145778803800 ) ) ; +#10317 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274454600, 60.30622828441261200, -28.24172590004351200 ) ) ; +#10318 = FACE_OUTER_BOUND ( 'NONE', #51328, .T. ) ; +#10319 = EDGE_CURVE ( 'NONE', #78782, #39193, #64814, .T. ) ; +#10320 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10322 = ORIENTED_EDGE ( 'NONE', *, *, #2412, .T. ) ; +#10323 = FACE_OUTER_BOUND ( 'NONE', #1473, .T. ) ; +#10324 = EDGE_CURVE ( 'NONE', #12694, #4753, #17845, .T. ) ; +#10325 = CARTESIAN_POINT ( 'NONE', ( 9.769169305342941800, 80.94992009694559000, -28.43638873268715300 ) ) ; +#10326 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 31.12753447840887200, -28.38801640354855500 ) ) ; +#10327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10328 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996100, 27.91684396980712500, -28.70555803802994200 ) ) ; +#10329 = ADVANCED_FACE ( 'NONE', ( #15141 ), #29781, .T. ) ; +#10330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10331 = EDGE_CURVE ( 'NONE', #34273, #22101, #46246, .T. ) ; +#10332 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 61.25732391202397800, -28.20555803802997700 ) ) ; +#10333 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34510, #9454, #16003, #59526 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153200941580800E-007, 0.0003300514678516671200 ), + .UNSPECIFIED. ) ; +#10334 = ADVANCED_FACE ( 'NONE', ( #17106 ), #60904, .F. ) ; +#10335 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.54999999999999700, -28.20555803802994200 ) ) ; +#10336 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310634900, 51.49769010897038900, -28.61774594594309900 ) ) ; +#10337 = EDGE_CURVE ( 'NONE', #4753, #54555, #3361, .T. ) ; +#10338 = CARTESIAN_POINT ( 'NONE', ( 15.32689004915739300, 36.19458663502698700, -28.70129965917120200 ) ) ; +#10339 = AXIS2_PLACEMENT_3D ( 'NONE', #80568, #31074, #18551 ) ; +#10340 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 41.00000000000000700, 6.794441961969995200 ) ) ; +#10341 = FACE_OUTER_BOUND ( 'NONE', #50818, .T. ) ; +#10342 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#10343 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45053, #26374, #51319, #14108 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.520483211101301000E-016, 0.001871986839426610600 ), + .UNSPECIFIED. ) ; +#10344 = FACE_OUTER_BOUND ( 'NONE', #80027, .T. ) ; +#10345 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155512300, 86.13383585008124000, -28.37247596307108200 ) ) ; +#10346 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47390, #3901, #59957, #22685 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674237423306600E-007, 0.0007606607323828872200 ), + .UNSPECIFIED. ) ; +#10347 = VERTEX_POINT ( 'NONE', #24248 ) ; +#10348 = CIRCLE ( 'NONE', #51944, 10.00000000000009600 ) ; +#10349 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 76.76150692817330400, -28.68631150211663400 ) ) ; +#10350 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194922800, 86.76150692817462600, -28.68631150211662400 ) ) ; +#10351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10352 = AXIS2_PLACEMENT_3D ( 'NONE', #50402, #659, #56696 ) ; +#10353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10354 = CARTESIAN_POINT ( 'NONE', ( -3.504197959378252000, 57.15000000000107100, 7.114457562229628000 ) ) ; +#10355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10356 = ORIENTED_EDGE ( 'NONE', *, *, #74474, .F. ) ; +#10357 = EDGE_CURVE ( 'NONE', #72096, #1643, #77420, .T. ) ; +#10358 = ADVANCED_FACE ( 'NONE', ( #79393 ), #74307, .T. ) ; +#10359 = EDGE_CURVE ( 'NONE', #38012, #5879, #31701, .T. ) ; +#10360 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17691, #54929, #61220, #23950 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185305600E-007, 0.001119324643800063500 ), + .UNSPECIFIED. ) ; +#10361 = AXIS2_PLACEMENT_3D ( 'NONE', #54441, #17202, #60726 ) ; +#10362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10363 = CIRCLE ( 'NONE', #35399, 10.50000000000009600 ) ; +#10364 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 19.34772751981642400, -28.70555803802998400 ) ) ; +#10365 = FACE_OUTER_BOUND ( 'NONE', #76720, .T. ) ; +#10366 = ORIENTED_EDGE ( 'NONE', *, *, #11064, .F. ) ; +#10367 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 79.91070809551074200, -28.20555803803030800 ) ) ; +#10368 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 80.69966441803876500, -28.70555803802997700 ) ) ; +#10369 = CARTESIAN_POINT ( 'NONE', ( -19.38589688571123300, 7.807529986947490600, -27.69601830766021400 ) ) ; +#10371 = ORIENTED_EDGE ( 'NONE', *, *, #15913, .T. ) ; +#10370 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#10372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10373 = EDGE_CURVE ( 'NONE', #77552, #44749, #69685, .T. ) ; +#10374 = ORIENTED_EDGE ( 'NONE', *, *, #17739, .F. ) ; +#10375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10376 = AXIS2_PLACEMENT_3D ( 'NONE', #53306, #16054, #59588 ) ; +#10377 = AXIS2_PLACEMENT_3D ( 'NONE', #51171, #13980, #57482 ) ; +#10378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10379 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-014, 12.15857157145694100, -28.20555803802994200 ) ) ; +#10380 = FACE_OUTER_BOUND ( 'NONE', #26567, .T. ) ; +#10381 = ORIENTED_EDGE ( 'NONE', *, *, #69911, .F. ) ; +#10382 = VERTEX_POINT ( 'NONE', #56045 ) ; +#10383 = ORIENTED_EDGE ( 'NONE', *, *, #49399, .T. ) ; +#10384 = AXIS2_PLACEMENT_3D ( 'NONE', #41479, #4216, #47706 ) ; +#10385 = EDGE_LOOP ( 'NONE', ( #2357, #54481, #71660 ) ) ; +#10386 = ORIENTED_EDGE ( 'NONE', *, *, #78228, .F. ) ; +#10387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10388 = FACE_OUTER_BOUND ( 'NONE', #71422, .T. ) ; +#10389 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 9.500000000000003600, 2.454695999814380200 ) ) ; +#10390 = VERTEX_POINT ( 'NONE', #74564 ) ; +#10391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10392 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5926, #80449, #36908, #12184 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710631560500E-007, 0.0008482615949373574100 ), + .UNSPECIFIED. ) ; +#10393 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#10394 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 49.66666666666667900, 2.794441961969992100 ) ) ; +#10395 = ORIENTED_EDGE ( 'NONE', *, *, #38597, .F. ) ; +#10396 = FACE_OUTER_BOUND ( 'NONE', #71314, .T. ) ; +#10397 = AXIS2_PLACEMENT_3D ( 'NONE', #19607, #63130, #25875 ) ; +#10398 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819633000, 51.65075715145291500, -28.20555803803005900 ) ) ; +#10399 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803803001300 ) ) ; +#10400 = EDGE_LOOP ( 'NONE', ( #41198, #18513, #6598, #21549, #45106, #40039, #27371, #750 ) ) ; +#10401 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10402 = CONICAL_SURFACE ( 'NONE', #11565, 10.50000000000009600, 0.7853981633974500600 ) ; +#10403 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180760100, 81.65075715145273700, -28.20555803802997700 ) ) ; +#10404 = CARTESIAN_POINT ( 'NONE', ( 15.18519915588398600, 9.872482245996387500, -28.70400831389253700 ) ) ; +#10405 = CIRCLE ( 'NONE', #59010, 10.00000000000009200 ) ; +#10406 = AXIS2_PLACEMENT_3D ( 'NONE', #58851, #21613, #65139 ) ; +#10407 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 12.87738371066728100, -28.70555803802994200 ) ) ; +#10408 = ORIENTED_EDGE ( 'NONE', *, *, #15007, .T. ) ; +#10409 = ADVANCED_FACE ( 'NONE', ( #13215 ), #58919, .F. ) ; +#10410 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10411 = EDGE_CURVE ( 'NONE', #71219, #31766, #55212, .T. ) ; +#10412 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148534200, 44.59761904761907700, -28.70555803802999900 ) ) ; +#10413 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964000, 28.65930907398620100, -28.35186440610856500 ) ) ; +#10414 = CARTESIAN_POINT ( 'NONE', ( 11.45417413420455000, 94.27944769779011800, -28.35118195858193600 ) ) ; +#10415 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 71.25732391202396300, -28.20555803802997700 ) ) ; +#10416 = AXIS2_PLACEMENT_3D ( 'NONE', #21534, #65066, #27802 ) ; +#10417 = CONICAL_SURFACE ( 'NONE', #8329, 10.00000000000009200, 0.7853981633974447300 ) ; +#10418 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10419 = EDGE_LOOP ( 'NONE', ( #40690, #20327, #72431, #11030 ) ) ; +#10420 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#10421 = FACE_OUTER_BOUND ( 'NONE', #6942, .T. ) ; +#10422 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818076400, 59.94924284854686600, -28.20555803803047800 ) ) ; +#10423 = VERTEX_POINT ( 'NONE', #12829 ) ; +#10424 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#10425 = VERTEX_POINT ( 'NONE', #56300 ) ; +#10426 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#10428 = ORIENTED_EDGE ( 'NONE', *, *, #80037, .T. ) ; +#10427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10429 = ADVANCED_FACE ( 'NONE', ( #11261 ), #25856, .T. ) ; +#10430 = CIRCLE ( 'NONE', #52427, 9.500000000000099500 ) ; +#10431 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#10432 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 28.74722181384564800, -28.70555803802998100 ) ) ; +#10433 = ORIENTED_EDGE ( 'NONE', *, *, #38282, .F. ) ; +#10434 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 26.44142842854297000, -28.20555803802994200 ) ) ; +#10435 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 49.57141756547891700, -28.70555803802996700 ) ) ; +#10436 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528143800, 41.46868088498121800, -28.51286550264512700 ) ) ; +#10437 = FACE_OUTER_BOUND ( 'NONE', #1516, .T. ) ; +#10438 = FACE_OUTER_BOUND ( 'NONE', #46087, .T. ) ; +#10440 = EDGE_CURVE ( 'NONE', #6558, #75642, #40763, .T. ) ; +#10439 = ORIENTED_EDGE ( 'NONE', *, *, #42135, .F. ) ; +#10441 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#10442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10443 = EDGE_CURVE ( 'NONE', #4401, #167, #26344, .T. ) ; +#10444 = CARTESIAN_POINT ( 'NONE', ( 17.07349184251555500, 90.22161678501139200, -28.29547179040480700 ) ) ; +#10445 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 71.43945992495517300, -28.34042301926893600 ) ) ; +#10446 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#10447 = ORIENTED_EDGE ( 'NONE', *, *, #18320, .F. ) ; +#10448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10449 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488114900, 69.60439022488320400, -28.70555803802997700 ) ) ; +#10450 = EDGE_CURVE ( 'NONE', #80208, #70245, #27821, .T. ) ; +#10451 = ADVANCED_FACE ( 'NONE', ( #62848 ), #56986, .F. ) ; +#10452 = EDGE_CURVE ( 'NONE', #35431, #76092, #11860, .T. ) ; +#10453 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65654, #47103, #65923, #28694 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576721700 ), + .UNSPECIFIED. ) ; +#10454 = FACE_OUTER_BOUND ( 'NONE', #23681, .T. ) ; +#10455 = AXIS2_PLACEMENT_3D ( 'NONE', #58890, #21658, #65185 ) ; +#10456 = VERTEX_POINT ( 'NONE', #37797 ) ; +#10457 = ORIENTED_EDGE ( 'NONE', *, *, #26445, .F. ) ; +#10458 = ORIENTED_EDGE ( 'NONE', *, *, #34145, .F. ) ; +#10459 = VERTEX_POINT ( 'NONE', #32110 ) ; +#10460 = EDGE_LOOP ( 'NONE', ( #45731, #43725, #47787 ) ) ; +#10461 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 55.66666666666667900, 5.722645192245505700 ) ) ; +#10462 = ORIENTED_EDGE ( 'NONE', *, *, #55355, .T. ) ; +#10463 = AXIS2_PLACEMENT_3D ( 'NONE', #35799, #79326, #42032 ) ; +#10464 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48041, #4557, #29614, #73107 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904300907600E-007, 0.0006651184466334761000 ), + .UNSPECIFIED. ) ; +#10465 = ORIENTED_EDGE ( 'NONE', *, *, #50932, .T. ) ; +#10466 = EDGE_CURVE ( 'NONE', #60436, #75777, #78179, .T. ) ; +#10467 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#10468 = EDGE_CURVE ( 'NONE', #5279, #63715, #19032, .T. ) ; +#10469 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 20.24660241562181900, -28.20555803802994200 ) ) ; +#10470 = EDGE_CURVE ( 'NONE', #15771, #51007, #73538, .T. ) ; +#10471 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 41.24660241562189400, -28.20555803802996700 ) ) ; +#10472 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286462000, 68.93300507136146400, -28.67024809316607700 ) ) ; +#10473 = CIRCLE ( 'NONE', #20027, 10.00000000000009400 ) ; +#10474 = AXIS2_PLACEMENT_3D ( 'NONE', #37124, #12139, #80665 ) ; +#10475 = ORIENTED_EDGE ( 'NONE', *, *, #28368, .T. ) ; +#10476 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148362300, 13.09761904761934800, -28.70555803802992800 ) ) ; +#10477 = ORIENTED_EDGE ( 'NONE', *, *, #35309, .F. ) ; +#10478 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73256, #35991, #11245, #54732 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.602085213965210300E-017, 0.001707792749031398600 ), + .UNSPECIFIED. ) ; +#10479 = CARTESIAN_POINT ( 'NONE', ( 5.533180123657681200, 85.79999999999967000, -28.37307693585093900 ) ) ; +#10480 = FACE_OUTER_BOUND ( 'NONE', #6037, .T. ) ; +#10481 = EDGE_CURVE ( 'NONE', #44986, #45068, #9266, .T. ) ; +#10482 = AXIS2_PLACEMENT_3D ( 'NONE', #8108, #14400, #45357 ) ; +#10483 = AXIS2_PLACEMENT_3D ( 'NONE', #66096, #41318, #4065 ) ; +#10484 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#10485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72625, #29140, #66364, #35370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589649801479114200E-007, 0.0003301105057474681500 ), + .UNSPECIFIED. ) ; +#10487 = ORIENTED_EDGE ( 'NONE', *, *, #33319, .T. ) ; +#10486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10488 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.36762008758024900, -28.26633708900911700 ) ) ; +#10489 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#10490 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 27.00000000000001800, -12.20555803803000200 ) ) ; +#10491 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10493 = CIRCLE ( 'NONE', #7261, 10.00000000000009400 ) ; +#10494 = ORIENTED_EDGE ( 'NONE', *, *, #27965, .F. ) ; +#10495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10497 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 59.28967419478899400, -28.59353418718932400 ) ) ; +#10498 = CIRCLE ( 'NONE', #65484, 9.500000000000099500 ) ; +#10499 = AXIS2_PLACEMENT_3D ( 'NONE', #49704, #68524, #55992 ) ; +#10500 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10501 = ORIENTED_EDGE ( 'NONE', *, *, #6177, .F. ) ; +#10502 = ADVANCED_FACE ( 'NONE', ( #44278 ), #55019, .T. ) ; +#10503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10504 = CARTESIAN_POINT ( 'NONE', ( -23.28220534557785700, 100.3888624662876500, -23.50058842085374200 ) ) ; +#10505 = AXIS2_PLACEMENT_3D ( 'NONE', #60463, #35692, #66693 ) ; +#10506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10507 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10508 = CONICAL_SURFACE ( 'NONE', #36424, 10.00000000000009400, 0.7853981633974447300 ) ; +#10509 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 61.50000000000001400, 2.454695999814380200 ) ) ; +#10510 = ORIENTED_EDGE ( 'NONE', *, *, #45164, .T. ) ; +#10511 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567223800, 49.85339758437807900, -28.20555803802996700 ) ) ; +#10512 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 8.673617379884035500E-016, -18.70555803803001300 ) ) ; +#10513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10515 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#10516 = ORIENTED_EDGE ( 'NONE', *, *, #62512, .T. ) ; +#10517 = ADVANCED_FACE ( 'NONE', ( #7308 ), #21939, .F. ) ; +#10518 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239500, 60.16054007504465100, -28.34042301926880800 ) ) ; +#10519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10520 = AXIS2_PLACEMENT_3D ( 'NONE', #23029, #47743, #35289 ) ; +#10521 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 63.99926474563208200, -28.70555803803007700 ) ) ; +#10522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10523 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7420, #44647, #57215, #19966 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389852407300E-007, 0.0008082646680357281300 ), + .UNSPECIFIED. ) ; +#10524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10525 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489074100, 28.97143078992715500, -28.37063977681166400 ) ) ; +#10526 = CONICAL_SURFACE ( 'NONE', #52466, 10.00000000000009200, 0.7853981633974447300 ) ; +#10527 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 81.08083798124329200, -28.45106778992437700 ) ) ; +#10528 = FACE_OUTER_BOUND ( 'NONE', #4063, .T. ) ; +#10529 = ORIENTED_EDGE ( 'NONE', *, *, #74430, .T. ) ; +#10530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10531 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10532 = EDGE_LOOP ( 'NONE', ( #4133, #41077, #29158, #29279 ) ) ; +#10533 = AXIS2_PLACEMENT_3D ( 'NONE', #46049, #77363, #71100 ) ; +#10534 = CARTESIAN_POINT ( 'NONE', ( -17.06581962135467700, 38.09136393618550200, -28.49020639256002200 ) ) ; +#10535 = ORIENTED_EDGE ( 'NONE', *, *, #78624, .T. ) ; +#10536 = ADVANCED_FACE ( 'NONE', ( #75473 ), #69604, .T. ) ; +#10537 = ORIENTED_EDGE ( 'NONE', *, *, #30163, .T. ) ; +#10538 = VERTEX_POINT ( 'NONE', #51351 ) ; +#10539 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901034400, 10.03732497909451400, -28.41043597897465400 ) ) ; +#10540 = ORIENTED_EDGE ( 'NONE', *, *, #60158, .T. ) ; +#10541 = CARTESIAN_POINT ( 'NONE', ( -16.62514415533942400, 9.187427922330284600, -28.57261973208899500 ) ) ; +#10542 = ORIENTED_EDGE ( 'NONE', *, *, #54139, .F. ) ; +#10543 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217464600, 60.16054007504464400, -28.34042301926885400 ) ) ; +#10544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10545 = EDGE_LOOP ( 'NONE', ( #74306, #33688, #59728, #31320 ) ) ; +#10546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10547 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#10548 = ADVANCED_FACE ( 'NONE', ( #42361 ), #36514, .T. ) ; +#10549 = CONICAL_SURFACE ( 'NONE', #62634, 10.50000000000009400, 0.7853981633974500600 ) ; +#10550 = EDGE_LOOP ( 'NONE', ( #47976, #65274, #25239, #69519 ) ) ; +#10551 = EDGE_CURVE ( 'NONE', #61765, #67043, #53058, .T. ) ; +#10553 = VERTEX_POINT ( 'NONE', #32893 ) ; +#10552 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#10554 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 67.83333333333334300, -4.152999154772353500 ) ) ; +#10555 = ORIENTED_EDGE ( 'NONE', *, *, #20833, .T. ) ; +#10556 = EDGE_CURVE ( 'NONE', #72435, #31298, #63733, .T. ) ; +#10557 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#10558 = CIRCLE ( 'NONE', #1571, 9.500000000000097700 ) ; +#10559 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 33.00000000000000000, -1.205558038030002800 ) ) ; +#10560 = VERTEX_POINT ( 'NONE', #20676 ) ; +#10561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10562 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8680, #14962, #33733, #77244 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921252529900E-007, 0.0004084731003434444500 ), + .UNSPECIFIED. ) ; +#10563 = EDGE_CURVE ( 'NONE', #79096, #14113, #71582, .T. ) ; +#10564 = VERTEX_POINT ( 'NONE', #70158 ) ; +#10565 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846313600, 60.79999999999999000, -28.55171188418376400 ) ) ; +#10566 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -1.999999999999988000, -1.205558038030005300 ) ) ; +#10567 = EDGE_CURVE ( 'NONE', #5753, #73303, #49208, .T. ) ; +#10568 = CARTESIAN_POINT ( 'NONE', ( 16.57123091997346300, 51.47225659168371700, -28.53062721603960500 ) ) ; +#10569 = EDGE_CURVE ( 'NONE', #74838, #40087, #34808, .T. ) ; +#10570 = CONICAL_SURFACE ( 'NONE', #30206, 10.50000000000009600, 0.7853981633974518300 ) ; +#10571 = ORIENTED_EDGE ( 'NONE', *, *, #42946, .T. ) ; +#10572 = CARTESIAN_POINT ( 'NONE', ( -5.305485189831812500, 44.44999999999998900, -9.066151219000669700 ) ) ; +#10573 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 35.33333333333332900, 4.294441961970000500 ) ) ; +#10574 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12867, #50063, #56347, #19091 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160285604900, 0.0006028148015507610100 ), + .UNSPECIFIED. ) ; +#10575 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701865300, 75.79999999999998300, -28.70555803802997700 ) ) ; +#10576 = ORIENTED_EDGE ( 'NONE', *, *, #1111, .F. ) ; +#10577 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488259300, 71.99560977511657700, -28.70555803802997700 ) ) ; +#10578 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 12.17681279774499500, -28.70555803802994200 ) ) ; +#10579 = ORIENTED_EDGE ( 'NONE', *, *, #14372, .T. ) ; +#10580 = AXIS2_PLACEMENT_3D ( 'NONE', #53501, #16250, #59768 ) ; +#10581 = EDGE_CURVE ( 'NONE', #59412, #36284, #38441, .T. ) ; +#10582 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#10583 = EDGE_CURVE ( 'NONE', #55143, #12163, #23904, .T. ) ; +#10584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10585 = EDGE_CURVE ( 'NONE', #21369, #5527, #20322, .T. ) ; +#10586 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10587 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274711200, 24.86787096422375100, -28.37244029424742200 ) ) ; +#10588 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#10589 = CARTESIAN_POINT ( 'NONE', ( 24.67027890384519400, 5.164928751545830600, -21.25592298950777000 ) ) ; +#10590 = AXIS2_PLACEMENT_3D ( 'NONE', #12756, #18973, #49944 ) ; +#10591 = CIRCLE ( 'NONE', #49386, 10.00000000000009200 ) ; +#10592 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719613600, 67.94142842854243700, -28.37229765499313300 ) ) ; +#10593 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10594 = CIRCLE ( 'NONE', #43687, 10.50000000000009600 ) ; +#10595 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 101.5999999999999900, -18.70555803802998100 ) ) ; +#10596 = ORIENTED_EDGE ( 'NONE', *, *, #36087, .F. ) ; +#10597 = EDGE_LOOP ( 'NONE', ( #37149, #72899, #26533, #39209 ) ) ; +#10598 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929786500, 55.79999999999994700, -28.70555803803047500 ) ) ; +#10599 = CARTESIAN_POINT ( 'NONE', ( 17.26470821603520600, 10.28298664431380200, -28.44647976475485900 ) ) ; +#10600 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939079900, 23.91466791010192600, -28.53910738522643300 ) ) ; +#10601 = AXIS2_PLACEMENT_3D ( 'NONE', #35516, #79036, #41730 ) ; +#10602 = AXIS2_PLACEMENT_3D ( 'NONE', #62018, #42945, #67989 ) ; +#10603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10604 = ADVANCED_FACE ( 'NONE', ( #5393 ), #18041, .F. ) ; +#10605 = CONICAL_SURFACE ( 'NONE', #1368, 10.50000000000009600, 0.7853981633974500600 ) ; +#10606 = ORIENTED_EDGE ( 'NONE', *, *, #71194, .T. ) ; +#10607 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466623300, 18.83106028708477500, -28.57333386111661300 ) ) ; +#10608 = CONICAL_SURFACE ( 'NONE', #6783, 10.00000000000009200, 0.7853981633974447300 ) ; +#10609 = ORIENTED_EDGE ( 'NONE', *, *, #41085, .F. ) ; +#10610 = VERTEX_POINT ( 'NONE', #21502 ) ; +#10611 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 38.83333333333334300, -9.205558038030003900 ) ) ; +#10612 = CARTESIAN_POINT ( 'NONE', ( -3.040268958506297200, 9.875614624812495600, -28.30309985153380500 ) ) ; +#10613 = ORIENTED_EDGE ( 'NONE', *, *, #49722, .F. ) ; +#10614 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#10615 = CONICAL_SURFACE ( 'NONE', #24646, 10.50000000000009800, 0.7853981633974518300 ) ; +#10616 = ORIENTED_EDGE ( 'NONE', *, *, #59154, .F. ) ; +#10617 = VERTEX_POINT ( 'NONE', #15218 ) ; +#10618 = VERTEX_POINT ( 'NONE', #52446 ) ; +#10619 = EDGE_LOOP ( 'NONE', ( #71653, #66590, #57133, #35440 ) ) ; +#10620 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10621 = ADVANCED_FACE ( 'NONE', ( #67677 ), #65740, .T. ) ; +#10622 = PLANE ( 'NONE', #40007 ) ; +#10623 = AXIS2_PLACEMENT_3D ( 'NONE', #36099, #79615, #42316 ) ; +#10624 = ORIENTED_EDGE ( 'NONE', *, *, #68915, .F. ) ; +#10625 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462693300, 61.39409401757625100, -28.39369363572353700 ) ) ; +#10626 = CARTESIAN_POINT ( 'NONE', ( -8.181535017374237400, 57.15000000000002000, 3.325188045350772300 ) ) ; +#10627 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15795, #53039, #28359, #71842 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464040500, 0.001179659862024500000 ), + .UNSPECIFIED. ) ; +#10628 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10629 = ORIENTED_EDGE ( 'NONE', *, *, #38537, .F. ) ; +#10630 = CIRCLE ( 'NONE', #58928, 9.500000000000099500 ) ; +#10631 = EDGE_LOOP ( 'NONE', ( #40093, #80284, #25552 ) ) ; +#10632 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498100400, 79.99827085154638000, -28.24094723680271500 ) ) ; +#10633 = VERTEX_POINT ( 'NONE', #2964 ) ; +#10634 = VERTEX_POINT ( 'NONE', #46448 ) ; +#10635 = ADVANCED_FACE ( 'NONE', ( #51072 ), #32619, .F. ) ; +#10636 = EDGE_CURVE ( 'NONE', #72397, #58931, #49134, .T. ) ; +#10637 = EDGE_LOOP ( 'NONE', ( #30769, #40163, #32670 ) ) ; +#10638 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#10639 = ORIENTED_EDGE ( 'NONE', *, *, #54768, .F. ) ; +#10640 = CARTESIAN_POINT ( 'NONE', ( -21.89277831863405100, 6.553992480251499100, -25.95626008153071100 ) ) ; +#10641 = AXIS2_PLACEMENT_3D ( 'NONE', #71666, #34391, #77916 ) ; +#10642 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507467300, 31.52620220503758800, -28.70555803802998800 ) ) ; +#10643 = ADVANCED_FACE ( 'NONE', ( #3415 ), #63788, .T. ) ; +#10644 = CIRCLE ( 'NONE', #22922, 10.50000000000009600 ) ; +#10645 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10646 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.15857157145701000, -28.20555803802994200 ) ) ; +#10647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10648 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 70.51916201875610600, -28.45106778992441600 ) ) ; +#10649 = EDGE_LOOP ( 'NONE', ( #19505, #61169, #79287, #57558 ) ) ; +#10650 = ADVANCED_FACE ( 'NONE', ( #19998 ), #30689, .F. ) ; +#10651 = AXIS2_PLACEMENT_3D ( 'NONE', #22571, #60390, #47821 ) ; +#10652 = FACE_OUTER_BOUND ( 'NONE', #62100, .T. ) ; +#10654 = ORIENTED_EDGE ( 'NONE', *, *, #78114, .T. ) ; +#10653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39994, #58218, #8956, #52473 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572624036100E-007, 0.0007596410370205542900 ), + .UNSPECIFIED. ) ; +#10656 = VERTEX_POINT ( 'NONE', #59270 ) ; +#10657 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537509600, 51.39409401757625800, -28.39369363572359700 ) ) ; +#10658 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 7.333333333333350800, -5.535685056952199400 ) ) ; +#10659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63657, #69872, #45079, #7849 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925676625300E-007, 0.0004431156063177105000 ), + .UNSPECIFIED. ) ; +#10660 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856812200, 63.67681279774481600, -28.70555803803014400 ) ) ; +#10661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10662 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 47.50000000000000700, -7.061964498581016200 ) ) ; +#10663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10664 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609139900, 70.13716795162604000, -28.48697406221692700 ) ) ; +#10665 = EDGE_CURVE ( 'NONE', #22304, #80692, #5873, .T. ) ; +#10666 = VECTOR ( 'NONE', #79099, 1000.000000000000000 ) ; +#10667 = CONICAL_SURFACE ( 'NONE', #70760, 10.50000000000009600, 0.7853981633974500600 ) ; +#10668 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3513, #34834, #41065, #3784, #47281, #10061 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002534260069688586500, 0.005068520139377175600 ), + .UNSPECIFIED. ) ; +#10669 = ORIENTED_EDGE ( 'NONE', *, *, #55221, .T. ) ; +#10670 = CARTESIAN_POINT ( 'NONE', ( -11.00202872172427200, 41.31091476818470900, -28.25432823872345300 ) ) ; +#10671 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.80277574221156200, -28.32715733700493700 ) ) ; +#10672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10673 = ORIENTED_EDGE ( 'NONE', *, *, #64983, .F. ) ; +#10674 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#10675 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274714700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#10676 = CIRCLE ( 'NONE', #31076, 9.500000000000097700 ) ; +#10678 = ORIENTED_EDGE ( 'NONE', *, *, #75562, .T. ) ; +#10677 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343256600, 18.35339758437769200, -28.20555803803025800 ) ) ; +#10679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10680 = CONICAL_SURFACE ( 'NONE', #75518, 10.00000000000009200, 0.7853981633974447300 ) ; +#10681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10682 = ORIENTED_EDGE ( 'NONE', *, *, #22024, .F. ) ; +#10683 = EDGE_CURVE ( 'NONE', #40718, #12265, #34599, .T. ) ; +#10684 = EDGE_CURVE ( 'NONE', #76858, #505, #72212, .T. ) ; +#10685 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10686 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819702700, 81.65075715145306400, -28.20555803803014100 ) ) ; +#10687 = CIRCLE ( 'NONE', #41780, 10.00000000000009200 ) ; +#10688 = PLANE ( 'NONE', #74161 ) ; +#10689 = ORIENTED_EDGE ( 'NONE', *, *, #45171, .T. ) ; +#10690 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10691 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#10692 = ORIENTED_EDGE ( 'NONE', *, *, #38018, .T. ) ; +#10693 = VERTEX_POINT ( 'NONE', #72079 ) ; +#10694 = ORIENTED_EDGE ( 'NONE', *, *, #65806, .T. ) ; +#10695 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10696 = ORIENTED_EDGE ( 'NONE', *, *, #38597, .T. ) ; +#10697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10698 = ORIENTED_EDGE ( 'NONE', *, *, #30269, .T. ) ; +#10699 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#10700 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 71.62753447840884700, -28.38801640354855100 ) ) ; +#10701 = AXIS2_PLACEMENT_3D ( 'NONE', #51003, #1258, #76050 ) ; +#10702 = ORIENTED_EDGE ( 'NONE', *, *, #22714, .F. ) ; +#10703 = EDGE_CURVE ( 'NONE', #47046, #19510, #57710, .T. ) ; +#10704 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 81.19833471562216700, -28.28704243186578500 ) ) ; +#10705 = EDGE_CURVE ( 'NONE', #26321, #59629, #43243, .T. ) ; +#10706 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 49.63131911501876200, -28.51286550264510200 ) ) ; +#10707 = EDGE_CURVE ( 'NONE', #41205, #69715, #28851, .T. ) ; +#10708 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62584, #50023, #31586, #75100 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674908246100E-007, 0.0003940053330073650700 ), + .UNSPECIFIED. ) ; +#10709 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074381200, 48.81967837323414000, -28.55467576046958200 ) ) ; +#10710 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671531400, 61.93585231025925000, -28.38420446581316300 ) ) ; +#10711 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 36.92318720225497900, -28.70555803802995200 ) ) ; +#10712 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#10713 = CONICAL_SURFACE ( 'NONE', #21893, 10.50000000000009600, 0.7853981633974518300 ) ; +#10714 = AXIS2_PLACEMENT_3D ( 'NONE', #12864, #56344, #19089 ) ; +#10715 = ORIENTED_EDGE ( 'NONE', *, *, #12445, .F. ) ; +#10716 = EDGE_LOOP ( 'NONE', ( #7310, #208, #25827, #2162 ) ) ; +#10717 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715068600, 20.32033471810043000, -28.30868034705248300 ) ) ; +#10718 = ORIENTED_EDGE ( 'NONE', *, *, #37472, .T. ) ; +#10719 = VERTEX_POINT ( 'NONE', #28853 ) ; +#10720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10721 = ORIENTED_EDGE ( 'NONE', *, *, #20236, .T. ) ; +#10722 = EDGE_LOOP ( 'NONE', ( #28122, #51677, #10046 ) ) ; +#10723 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.79999999999999700, -28.20555803802997700 ) ) ; +#10724 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10725 = VECTOR ( 'NONE', #48032, 1000.000000000000000 ) ; +#10726 = AXIS2_PLACEMENT_3D ( 'NONE', #25867, #32104, #56295 ) ; +#10727 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900905600, 10.03732497909458700, -28.41043597897464300 ) ) ; +#10728 = AXIS2_PLACEMENT_3D ( 'NONE', #30410, #73911, #36613 ) ; +#10729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10730 = CARTESIAN_POINT ( 'NONE', ( -10.52345281922132300, 9.410658115921108900, -28.68817749111424900 ) ) ; +#10731 = ORIENTED_EDGE ( 'NONE', *, *, #66328, .T. ) ; +#10732 = AXIS2_PLACEMENT_3D ( 'NONE', #24210, #67713, #30479 ) ; +#10733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10734 = ORIENTED_EDGE ( 'NONE', *, *, #75485, .T. ) ; +#10735 = VECTOR ( 'NONE', #44950, 1000.000000000000000 ) ; +#10736 = EDGE_LOOP ( 'NONE', ( #41761, #29853, #72135, #10764 ) ) ; +#10737 = ORIENTED_EDGE ( 'NONE', *, *, #79094, .T. ) ; +#10738 = EDGE_LOOP ( 'NONE', ( #4588, #42875, #39714, #335 ) ) ; +#10739 = ADVANCED_FACE ( 'NONE', ( #40421 ), #14130, .T. ) ; +#10740 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 53.50000000000002800, -7.061964498581022400 ) ) ; +#10741 = AXIS2_PLACEMENT_3D ( 'NONE', #9890, #53409, #16156 ) ; +#10742 = EDGE_CURVE ( 'NONE', #13603, #10288, #14337, .T. ) ; +#10743 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#10744 = ADVANCED_FACE ( 'NONE', ( #16090 ), #61845, .T. ) ; +#10745 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 57.70389005397395000, -28.37519436813183300 ) ) ; +#10746 = FACE_OUTER_BOUND ( 'NONE', #30358, .T. ) ; +#10747 = EDGE_CURVE ( 'NONE', #62677, #62452, #80651, .T. ) ; +#10748 = VERTEX_POINT ( 'NONE', #16835 ) ; +#10749 = ORIENTED_EDGE ( 'NONE', *, *, #67999, .T. ) ; +#10750 = AXIS2_PLACEMENT_3D ( 'NONE', #16083, #59607, #22336 ) ; +#10751 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12051, #49265, #19389, #62933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794104664900E-007, 0.0009376791149930102000 ), + .UNSPECIFIED. ) ; +#10752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10753 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000044600, 70.16749699759752400, -28.20555803803030800 ) ) ; +#10754 = ADVANCED_FACE ( 'NONE', ( #80322 ), #54078, .T. ) ; +#10755 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488138000, 59.60439022488338200, -28.70555803802997700 ) ) ; +#10756 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 24.83333333333334600, 9.794441961969999600 ) ) ; +#10757 = CIRCLE ( 'NONE', #66460, 10.00000000000009200 ) ; +#10758 = EDGE_LOOP ( 'NONE', ( #7708, #78286, #6900, #21466, #58587, #20179, #55860 ) ) ; +#10759 = AXIS2_PLACEMENT_3D ( 'NONE', #50304, #13102, #56592 ) ; +#10760 = ORIENTED_EDGE ( 'NONE', *, *, #45262, .T. ) ; +#10761 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990700, 20.78933626866497200, -28.53923937255170200 ) ) ; +#10762 = CIRCLE ( 'NONE', #50571, 10.00000000000009200 ) ; +#10763 = ORIENTED_EDGE ( 'NONE', *, *, #58939, .T. ) ; +#10764 = ORIENTED_EDGE ( 'NONE', *, *, #2537, .F. ) ; +#10765 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484955900, 59.28967419478918500, -28.59353418718928100 ) ) ; +#10766 = VERTEX_POINT ( 'NONE', #41833 ) ; +#10767 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#10768 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734525200, 61.32559822014150100, -28.29986836858047300 ) ) ; +#10769 = ORIENTED_EDGE ( 'NONE', *, *, #25101, .T. ) ; +#10770 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10771 = CARTESIAN_POINT ( 'NONE', ( -22.45344171145879400, 100.9694854729272700, -22.23072821691377900 ) ) ; +#10772 = ORIENTED_EDGE ( 'NONE', *, *, #1976, .T. ) ; +#10773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10774 = CIRCLE ( 'NONE', #76560, 10.50000000000009800 ) ; +#10775 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10776 = EDGE_CURVE ( 'NONE', #27688, #71810, #66220, .T. ) ; +#10777 = EDGE_LOOP ( 'NONE', ( #76483, #33090, #53809, #66893, #62384 ) ) ; +#10778 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 59.33333333333334300, -5.535685056952199400 ) ) ; +#10779 = VERTEX_POINT ( 'NONE', #54342 ) ; +#10780 = CARTESIAN_POINT ( 'NONE', ( 24.54878299176476000, 5.225608504117603000, -21.73852730698800800 ) ) ; +#10781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10782 = ORIENTED_EDGE ( 'NONE', *, *, #49651, .T. ) ; +#10783 = ORIENTED_EDGE ( 'NONE', *, *, #38750, .T. ) ; +#10784 = ORIENTED_EDGE ( 'NONE', *, *, #18690, .F. ) ; +#10785 = ORIENTED_EDGE ( 'NONE', *, *, #55721, .F. ) ; +#10786 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#10787 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580927700, 42.73263087059571300, -28.67620115463453300 ) ) ; +#10788 = FACE_OUTER_BOUND ( 'NONE', #18881, .T. ) ; +#10789 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458392400, 50.08874248361073000, -28.53740755999537300 ) ) ; +#10790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10791 = CARTESIAN_POINT ( 'NONE', ( 8.298084469544157600, 9.866352599407852300, -28.70555803803002000 ) ) ; +#10792 = ORIENTED_EDGE ( 'NONE', *, *, #43206, .T. ) ; +#10793 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 51.43250300240198000, -28.20555803803047800 ) ) ; +#10794 = CARTESIAN_POINT ( 'NONE', ( -17.26457816485415000, 41.78307383672418500, -28.44650835714145700 ) ) ; +#10795 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79012, #29515, #35740, #79259 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185222579971600E-007, 0.0006654852833087037000 ), + .UNSPECIFIED. ) ; +#10796 = CARTESIAN_POINT ( 'NONE', ( 10.53549977590280100, 9.204283415895183400, -28.67591357691968300 ) ) ; +#10797 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 43.89610994602603700, -28.37519436813183700 ) ) ; +#10798 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000000000, 68.62623792124938400, -28.70555803802997700 ) ) ; +#10799 = EDGE_CURVE ( 'NONE', #7904, #63749, #1467, .T. ) ; +#10800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10801 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655676200, 28.42298334620756600, -28.20555803802994500 ) ) ; +#10802 = CONICAL_SURFACE ( 'NONE', #27458, 10.50000000000009600, 0.7853981633974500600 ) ; +#10803 = ORIENTED_EDGE ( 'NONE', *, *, #37082, .F. ) ; +#10804 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64919, #52616, #71405, #34146 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679646315757200E-007, 0.0007596411030276280100 ), + .UNSPECIFIED. ) ; +#10805 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662742480000, 53.66464174796053000, -28.53896444442208500 ) ) ; +#10806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46222, #2708, #58766, #21525 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549274299500E-007, 0.0008759529789574139900 ), + .UNSPECIFIED. ) ; +#10807 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#10808 = AXIS2_PLACEMENT_3D ( 'NONE', #869, #1132, #7391 ) ; +#10809 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 84.37738371066736000, -28.70555803803030800 ) ) ; +#10810 = EDGE_CURVE ( 'NONE', #58618, #15380, #45224, .T. ) ; +#10811 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 60.79999999999998300, -28.55171188418376400 ) ) ; +#10812 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#10813 = ADVANCED_FACE ( 'NONE', ( #47182 ), #26789, .F. ) ; +#10814 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42856, #61401, #30651, #74166 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153195774580800E-007, 0.0003300514678516637600 ), + .UNSPECIFIED. ) ; +#10815 = EDGE_CURVE ( 'NONE', #16084, #50285, #43300, .T. ) ; +#10816 = AXIS2_PLACEMENT_3D ( 'NONE', #59501, #22220, #65758 ) ; +#10817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10819 = CARTESIAN_POINT ( 'NONE', ( -16.44673298322516100, 80.11613117245443000, -28.57420149390117100 ) ) ; +#10820 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 65.66666666666668600, 4.294441961969993400 ) ) ; +#10821 = ORIENTED_EDGE ( 'NONE', *, *, #15420, .T. ) ; +#10822 = ORIENTED_EDGE ( 'NONE', *, *, #10832, .F. ) ; +#10823 = ORIENTED_EDGE ( 'NONE', *, *, #31443, .T. ) ; +#10824 = ADVANCED_FACE ( 'NONE', ( #59891 ), #57914, .T. ) ; +#10825 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 30.83333333333334300, -2.545304000185615800 ) ) ; +#10826 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #38240, #992 ) ; +#10827 = AXIS2_PLACEMENT_3D ( 'NONE', #78362, #41080, #3805 ) ; +#10828 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 81.96823913367204300, -28.70555803802997700 ) ) ; +#10829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10830 = EDGE_CURVE ( 'NONE', #73096, #39642, #74475, .T. ) ; +#10831 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#10832 = EDGE_CURVE ( 'NONE', #48534, #18103, #51685, .T. ) ; +#10833 = AXIS2_PLACEMENT_3D ( 'NONE', #12993, #62479, #19221 ) ; +#10834 = FACE_OUTER_BOUND ( 'NONE', #45241, .T. ) ; +#10835 = ORIENTED_EDGE ( 'NONE', *, *, #57040, .F. ) ; +#10836 = ORIENTED_EDGE ( 'NONE', *, *, #25975, .F. ) ; +#10837 = CARTESIAN_POINT ( 'NONE', ( -9.055879258549950400, 44.45000000000002400, -2.583402129706564600 ) ) ; +#10838 = ORIENTED_EDGE ( 'NONE', *, *, #58239, .T. ) ; +#10839 = CIRCLE ( 'NONE', #42734, 10.00000000000009400 ) ; +#10840 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 33.16666666666668600, -4.152999154772358800 ) ) ; +#10841 = VERTEX_POINT ( 'NONE', #30180 ) ; +#10842 = ORIENTED_EDGE ( 'NONE', *, *, #20558, .T. ) ; +#10843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40129, #33882, #8821, #2857 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397492800, 0.001517194977238199600 ), + .UNSPECIFIED. ) ; +#10844 = ORIENTED_EDGE ( 'NONE', *, *, #38040, .T. ) ; +#10845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10846 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819190700, 89.94924284854670300, -28.20555803802997700 ) ) ; +#10848 = ORIENTED_EDGE ( 'NONE', *, *, #5453, .F. ) ; +#10847 = EDGE_CURVE ( 'NONE', #19455, #31009, #37240, .T. ) ; +#10849 = ORIENTED_EDGE ( 'NONE', *, *, #52205, .T. ) ; +#10850 = AXIS2_PLACEMENT_3D ( 'NONE', #14278, #20801, #64350 ) ; +#10851 = FACE_OUTER_BOUND ( 'NONE', #57467, .T. ) ; +#10852 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17277, #11029, #35775, #60808 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695385387936000E-007, 0.0007987676590761165200 ), + .UNSPECIFIED. ) ; +#10853 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#10854 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000042600, 68.62623792124929900, -28.70555803803047500 ) ) ; +#10855 = ADVANCED_FACE ( 'NONE', ( #78386 ), #48867, .T. ) ; +#10856 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10858 = CARTESIAN_POINT ( 'NONE', ( 22.87055151362412200, 6.064725991005946800, -24.87441234855611300 ) ) ; +#10859 = CONICAL_SURFACE ( 'NONE', #47835, 10.50000000000009200, 0.7853981633974482800 ) ; +#10860 = ORIENTED_EDGE ( 'NONE', *, *, #50084, .F. ) ; +#10861 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344754100, 10.17701665379211600, -28.20555803803009800 ) ) ; +#10862 = CARTESIAN_POINT ( 'NONE', ( -10.26319304061096800, 92.73236790253373800, -28.64516875322530600 ) ) ; +#10863 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#10864 = ORIENTED_EDGE ( 'NONE', *, *, #50095, .T. ) ; +#10865 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965600, 28.65930907398619700, -28.35186440610856500 ) ) ; +#10866 = EDGE_LOOP ( 'NONE', ( #6704, #636, #61440 ) ) ; +#10867 = ORIENTED_EDGE ( 'NONE', *, *, #9487, .F. ) ; +#10868 = ORIENTED_EDGE ( 'NONE', *, *, #62432, .F. ) ; +#10869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10870 = CARTESIAN_POINT ( 'NONE', ( 19.83228401198908500, 101.2646468415132700, -21.27689279919526700 ) ) ; +#10871 = ORIENTED_EDGE ( 'NONE', *, *, #35955, .F. ) ; +#10872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10874 = FACE_OUTER_BOUND ( 'NONE', #12799, .T. ) ; +#10875 = CARTESIAN_POINT ( 'NONE', ( 11.95723973586456000, 85.79999999999951400, -28.53819074160733700 ) ) ; +#10876 = CARTESIAN_POINT ( 'NONE', ( -17.31601142792135300, 18.47675710338222300, -28.43415153258097700 ) ) ; +#10877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10878 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10879 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#10880 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.43250300240198000, -28.20555803803047800 ) ) ; +#10881 = AXIS2_PLACEMENT_3D ( 'NONE', #73327, #41753, #36057 ) ; +#10882 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 36.66666666666667900, 5.722645192245505700 ) ) ; +#10883 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427200, 36.92318720225498700, -28.70555803802995200 ) ) ; +#10884 = CIRCLE ( 'NONE', #2871, 10.00000000000009200 ) ; +#10885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10886 = ORIENTED_EDGE ( 'NONE', *, *, #75950, .T. ) ; +#10887 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 28.66349705304866500, -28.30782889147480600 ) ) ; +#10888 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858086700, 67.92318720225489400, -28.70555803802997700 ) ) ; +#10889 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811170600, 57.05460903980866000, -28.69802137271993200 ) ) ; +#10890 = AXIS2_PLACEMENT_3D ( 'NONE', #25520, #69015, #31764 ) ; +#10891 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 62.18315603019283300, -28.70555803802999500 ) ) ; +#10892 = PLANE ( 'NONE', #62314 ) ; +#10893 = CARTESIAN_POINT ( 'NONE', ( -9.045841759904540400, 57.15000000000003400, -4.118941048729610100 ) ) ; +#10894 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609044400, 60.13716795162677200, -28.48697406221666700 ) ) ; +#10895 = EDGE_CURVE ( 'NONE', #561, #75931, #10235, .T. ) ; +#10896 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 83.65857157145681800, -28.20555803803047800 ) ) ; +#10897 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10898 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 71.43945992495532900, -28.34042301926881200 ) ) ; +#10899 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10900 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17842, #55081, #5592, #49069 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983716906441000E-007, 0.001076779618376413800 ), + .UNSPECIFIED. ) ; +#10901 = EDGE_LOOP ( 'NONE', ( #16887, #61363, #74880 ) ) ; +#10902 = CARTESIAN_POINT ( 'NONE', ( -24.22479963450786800, 5.387705612280024400, -22.56861273873239800 ) ) ; +#10903 = ORIENTED_EDGE ( 'NONE', *, *, #37307, .F. ) ; +#10904 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69945, #14212, #32961, #76475 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.006877718201233461900, 0.007639752840043666200 ), + .UNSPECIFIED. ) ; +#10905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10906 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.15857157145701200, -28.20555803802994200 ) ) ; +#10907 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 78.62623792124938400, -28.70555803802997700 ) ) ; +#10908 = CARTESIAN_POINT ( 'NONE', ( 2.042760264135453900, 55.79999999999999700, -28.53819074160684400 ) ) ; +#10909 = ADVANCED_FACE ( 'NONE', ( #28778 ), #61444, .T. ) ; +#10910 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36247, #67254, #42755, #5511 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555120073000E-007, 0.0009605145132142071200 ), + .UNSPECIFIED. ) ; +#10911 = FACE_OUTER_BOUND ( 'NONE', #70230, .T. ) ; +#10912 = ORIENTED_EDGE ( 'NONE', *, *, #13562, .F. ) ; +#10913 = ORIENTED_EDGE ( 'NONE', *, *, #33651, .F. ) ; +#10914 = EDGE_CURVE ( 'NONE', #10766, #44606, #22820, .T. ) ; +#10915 = FACE_OUTER_BOUND ( 'NONE', #62764, .T. ) ; +#10916 = EDGE_CURVE ( 'NONE', #53544, #29714, #8318, .T. ) ; +#10917 = ORIENTED_EDGE ( 'NONE', *, *, #24587, .T. ) ; +#10918 = VERTEX_POINT ( 'NONE', #18436 ) ; +#10919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10920 = ORIENTED_EDGE ( 'NONE', *, *, #5583, .T. ) ; +#10921 = ADVANCED_FACE ( 'NONE', ( #41365 ), #80453, .T. ) ; +#10923 = ORIENTED_EDGE ( 'NONE', *, *, #74318, .F. ) ; +#10922 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 5.166666666666681200, 3.794441961969996900 ) ) ; +#10924 = ORIENTED_EDGE ( 'NONE', *, *, #65732, .T. ) ; +#10925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62215, #24680, #74719, #37416 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782093800, 0.0004366687057309879500 ), + .UNSPECIFIED. ) ; +#10926 = CONICAL_SURFACE ( 'NONE', #56697, 10.00000000000009400, 0.7853981633974447300 ) ; +#10927 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 51.52858243452104100, -28.70555803802997700 ) ) ; +#10928 = EDGE_CURVE ( 'NONE', #48902, #24516, #12190, .T. ) ; +#10929 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390527000, 61.46283204837340000, -28.48697406221666000 ) ) ; +#10930 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 45.33333333333334300, 5.722645192245503900 ) ) ; +#10931 = EDGE_CURVE ( 'NONE', #69303, #43752, #74674, .T. ) ; +#10932 = EDGE_LOOP ( 'NONE', ( #48426, #25666, #50344, #12186 ) ) ; +#10933 = AXIS2_PLACEMENT_3D ( 'NONE', #41438, #4178, #47666 ) ; +#10934 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#10935 = FACE_OUTER_BOUND ( 'NONE', #60836, .T. ) ; +#10936 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10937 = ORIENTED_EDGE ( 'NONE', *, *, #29093, .T. ) ; +#10938 = ADVANCED_FACE ( 'NONE', ( #8239 ), #6328, .F. ) ; +#10939 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10940 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#10941 = ORIENTED_EDGE ( 'NONE', *, *, #59900, .T. ) ; +#10942 = ORIENTED_EDGE ( 'NONE', *, *, #20922, .T. ) ; +#10943 = ORIENTED_EDGE ( 'NONE', *, *, #21747, .T. ) ; +#10944 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#10945 = CIRCLE ( 'NONE', #9552, 10.00000000000009400 ) ; +#10946 = ORIENTED_EDGE ( 'NONE', *, *, #26571, .F. ) ; +#10947 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10948 = FACE_OUTER_BOUND ( 'NONE', #58307, .T. ) ; +#10949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10950 = AXIS2_PLACEMENT_3D ( 'NONE', #57395, #20148, #63670 ) ; +#10951 = EDGE_CURVE ( 'NONE', #77362, #75162, #60232, .T. ) ; +#10952 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #242, #74787, #49709, #43729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438857157800E-007, 0.0007763347809200208700 ), + .UNSPECIFIED. ) ; +#10953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10954 = EDGE_CURVE ( 'NONE', #52378, #32707, #45704, .T. ) ; +#10955 = EDGE_CURVE ( 'NONE', #51967, #56129, #55944, .T. ) ; +#10956 = ADVANCED_FACE ( 'NONE', ( #39397 ), #37433, .F. ) ; +#10957 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10959 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195753700, 42.59027028261004900, -28.70555803802997400 ) ) ; +#10958 = AXIS2_PLACEMENT_3D ( 'NONE', #21031, #64561, #27298 ) ; +#10960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10961 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654403000, 71.52472935029898300, -28.39317435246130500 ) ) ; +#10962 = AXIS2_PLACEMENT_3D ( 'NONE', #27888, #58854, #33844 ) ; +#10963 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305475000, 17.70395328581637500, -28.70555803803002000 ) ) ; +#10964 = CONICAL_SURFACE ( 'NONE', #3355, 10.50000000000009600, 0.7853981633974482800 ) ; +#10965 = EDGE_LOOP ( 'NONE', ( #24732, #2025, #10237 ) ) ; +#10966 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 30.75489551879203600, -28.37193179497695900 ) ) ; +#10967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10968 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#10969 = AXIS2_PLACEMENT_3D ( 'NONE', #49794, #12590, #56085 ) ; +#10970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10971 = EDGE_CURVE ( 'NONE', #16023, #56108, #53998, .T. ) ; +#10972 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567169600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#10973 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136825300, 71.67041185698241200, -28.27321389036146800 ) ) ; +#10974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10975 = AXIS2_PLACEMENT_3D ( 'NONE', #43073, #5835, #49310 ) ; +#10976 = AXIS2_PLACEMENT_3D ( 'NONE', #63113, #56845, #38053 ) ; +#10977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10978 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10979 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 28.47246552159108600, -28.38801640354855800 ) ) ; +#10980 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10981 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725288800, 24.86787096422375900, -28.37244029424742200 ) ) ; +#10982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10984 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488122900, 61.99560977511662700, -28.70555803802997700 ) ) ; +#10985 = CARTESIAN_POINT ( 'NONE', ( 10.03177803894799800, 80.28233213024627400, -28.25051428653864600 ) ) ; +#10986 = EDGE_LOOP ( 'NONE', ( #56480, #33898, #51989 ) ) ; +#10987 = ORIENTED_EDGE ( 'NONE', *, *, #53239, .T. ) ; +#10988 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670952900, 31.65863441772059200, -28.48677465922828100 ) ) ; +#10989 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804072300, 43.65857157145701700, -28.37229765499282100 ) ) ; +#10990 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844087600, 20.29362734601327400, -28.24165217761326800 ) ) ; +#10991 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148552400, 46.50238095238090400, -28.70555803802996700 ) ) ; +#10992 = CIRCLE ( 'NONE', #1139, 9.500000000000099500 ) ; +#10993 = AXIS2_PLACEMENT_3D ( 'NONE', #33363, #76885, #39616 ) ; +#10994 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .F. ) ; +#10995 = CIRCLE ( 'NONE', #64969, 10.50000000000009600 ) ; +#10996 = ORIENTED_EDGE ( 'NONE', *, *, #28486, .F. ) ; +#10997 = ORIENTED_EDGE ( 'NONE', *, *, #57961, .T. ) ; +#10998 = FACE_OUTER_BOUND ( 'NONE', #73134, .T. ) ; +#10999 = CARTESIAN_POINT ( 'NONE', ( -16.99797853026621700, 18.28907435382948400, -28.25433648786263100 ) ) ; +#11000 = ORIENTED_EDGE ( 'NONE', *, *, #50286, .T. ) ; +#11001 = ORIENTED_EDGE ( 'NONE', *, *, #32132, .T. ) ; +#11002 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 51.33333333333334300, 2.794441961969998300 ) ) ; +#11003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11004 = AXIS2_PLACEMENT_3D ( 'NONE', #42551, #18361, #61892 ) ; +#11005 = CONICAL_SURFACE ( 'NONE', #44617, 10.50000000000009600, 0.7853981633974500600 ) ; +#11006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11007 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 71.43945992495501700, -28.34042301926918800 ) ) ; +#11008 = ADVANCED_FACE ( 'NONE', ( #70550 ), #68618, .T. ) ; +#11009 = EDGE_CURVE ( 'NONE', #50034, #15529, #31296, .T. ) ; +#11010 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33430, #27204, #15205, #58718 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137489453700 ), + .UNSPECIFIED. ) ; +#11011 = ORIENTED_EDGE ( 'NONE', *, *, #6860, .T. ) ; +#11012 = CONICAL_SURFACE ( 'NONE', #40465, 10.50000000000009600, 0.7853981633974518300 ) ; +#11013 = AXIS2_PLACEMENT_3D ( 'NONE', #50252, #13048, #56531 ) ; +#11014 = EDGE_LOOP ( 'NONE', ( #17336, #55104, #61309 ) ) ; +#11015 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#11016 = ORIENTED_EDGE ( 'NONE', *, *, #9701, .F. ) ; +#11017 = EDGE_LOOP ( 'NONE', ( #33864, #6762, #32731 ) ) ; +#11018 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11019 = ORIENTED_EDGE ( 'NONE', *, *, #14534, .F. ) ; +#11020 = FACE_OUTER_BOUND ( 'NONE', #76995, .T. ) ; +#11021 = ADVANCED_FACE ( 'NONE', ( #20932 ), #35538, .T. ) ; +#11022 = ORIENTED_EDGE ( 'NONE', *, *, #16883, .T. ) ; +#11023 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57978, #21009, #27268, #70750 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.456585301718499700E-017, 0.001871986839425514100 ), + .UNSPECIFIED. ) ; +#11024 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180791100, 59.94924284854687400, -28.20555803802997700 ) ) ; +#11025 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11026 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.62753447840813700, -28.38801640354867200 ) ) ; +#11027 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385196300, 20.60677350908857300, -28.30799595738880800 ) ) ; +#11028 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 22.66666666666668200, -10.73183747965883100 ) ) ; +#11029 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484657800, 60.58127875436107200, -28.53757464917594400 ) ) ; +#11030 = ORIENTED_EDGE ( 'NONE', *, *, #43549, .F. ) ; +#11031 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 101.5999999999999900, -18.70555803802999500 ) ) ; +#11032 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807117100, 66.79999999999977000, -28.70555803803014400 ) ) ; +#11033 = EDGE_CURVE ( 'NONE', #14523, #71240, #72528, .T. ) ; +#11034 = ORIENTED_EDGE ( 'NONE', *, *, #49447, .F. ) ; +#11035 = ADVANCED_FACE ( 'NONE', ( #52019 ), #75514, .T. ) ; +#11036 = CONICAL_SURFACE ( 'NONE', #16437, 10.50000000000009600, 0.7853981633974500600 ) ; +#11038 = EDGE_CURVE ( 'NONE', #46732, #23991, #16833, .T. ) ; +#11037 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70431, #64227, #39426, #2151 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577241100 ), + .UNSPECIFIED. ) ; +#11039 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753200, 39.70543520232828900, -28.70555803802995200 ) ) ; +#11040 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#11041 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 61.35277818615431800, -28.70555803802999500 ) ) ; +#11042 = EDGE_CURVE ( 'NONE', #35530, #34478, #2330, .T. ) ; +#11043 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60823, #79307, #66527, #23537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417461471013200E-007, 0.0004435563144345145700 ), + .UNSPECIFIED. ) ; +#11044 = ADVANCED_FACE ( 'NONE', ( #24836 ), #50065, .F. ) ; +#11045 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.65857157145700300, -28.20555803802997700 ) ) ; +#11046 = EDGE_CURVE ( 'NONE', #40378, #56745, #66671, .T. ) ; +#11047 = AXIS2_PLACEMENT_3D ( 'NONE', #66579, #23324, #54321 ) ; +#11048 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752718500, 82.08770193146116900, -28.47147304844863300 ) ) ; +#11049 = PLANE ( 'NONE', #15402 ) ; +#11050 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 57.16666666666667100, 3.794441961969996900 ) ) ; +#11051 = CONICAL_SURFACE ( 'NONE', #51821, 10.00000000000009200, 0.7853981633974447300 ) ; +#11052 = EDGE_CURVE ( 'NONE', #60076, #36405, #22885, .T. ) ; +#11053 = CARTESIAN_POINT ( 'NONE', ( 18.49243782672170200, 3.015124346557582800, -25.88815306470378300 ) ) ; +#11054 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#11055 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#11056 = EDGE_LOOP ( 'NONE', ( #45362, #10006, #30920, #73436 ) ) ; +#11057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11058 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#11059 = AXIS2_PLACEMENT_3D ( 'NONE', #52215, #14719, #33489 ) ; +#11060 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819073900, 51.65075715145259500, -28.20555803803014100 ) ) ; +#11062 = ORIENTED_EDGE ( 'NONE', *, *, #21420, .F. ) ; +#11061 = EDGE_CURVE ( 'NONE', #998, #24894, #4371, .T. ) ; +#11063 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995705000, 44.61903418172678200, -28.69431509262337700 ) ) ; +#11064 = EDGE_CURVE ( 'NONE', #75458, #69830, #2398, .T. ) ; +#11065 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 20.35277818615433200, -28.70555803802998400 ) ) ; +#11066 = EDGE_CURVE ( 'NONE', #73924, #77938, #68678, .T. ) ; +#11067 = ORIENTED_EDGE ( 'NONE', *, *, #6051, .T. ) ; +#11068 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661479300, 49.49322649091141800, -28.30799595738881900 ) ) ; +#11069 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#11070 = CIRCLE ( 'NONE', #69886, 10.50000000000009600 ) ; +#11071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#11072 = ORIENTED_EDGE ( 'NONE', *, *, #57265, .F. ) ; +#11073 = CIRCLE ( 'NONE', #36225, 9.500000000000097700 ) ; +#11074 = ORIENTED_EDGE ( 'NONE', *, *, #8525, .F. ) ; +#11075 = AXIS2_PLACEMENT_3D ( 'NONE', #22786, #66309, #29088 ) ; +#11076 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11077 = CARTESIAN_POINT ( 'NONE', ( -3.371418216713584200, 60.16749699759768800, -28.25056166218022100 ) ) ; +#11078 = CONICAL_SURFACE ( 'NONE', #10520, 10.50000000000009600, 0.7853981633974518300 ) ; +#11080 = ORIENTED_EDGE ( 'NONE', *, *, #74534, .F. ) ; +#11079 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11081 = ORIENTED_EDGE ( 'NONE', *, *, #66593, .F. ) ; +#11082 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11083 = EDGE_CURVE ( 'NONE', #19571, #34137, #54211, .T. ) ; +#11084 = ORIENTED_EDGE ( 'NONE', *, *, #10954, .F. ) ; +#11085 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063449500, 10.09789380924872900, -28.25343951603343100 ) ) ; +#11086 = AXIS2_PLACEMENT_3D ( 'NONE', #26427, #63671, #38863 ) ; +#11087 = AXIS2_PLACEMENT_3D ( 'NONE', #77104, #33586, #52306 ) ; +#11088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11090 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5035, #4504, #17572, #61095 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211137500, 0.001517199873936578600 ), + .UNSPECIFIED. ) ; +#11091 = CONICAL_SURFACE ( 'NONE', #13346, 10.50000000000009400, 0.7853981633974500600 ) ; +#11092 = ORIENTED_EDGE ( 'NONE', *, *, #41191, .F. ) ; +#11093 = FACE_OUTER_BOUND ( 'NONE', #53954, .T. ) ; +#11094 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 60.79999999999998300, -28.55171188418376700 ) ) ; +#11095 = ORIENTED_EDGE ( 'NONE', *, *, #37530, .T. ) ; +#11096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11097 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 63.49999999999999300, -9.258116921287651700 ) ) ; +#11098 = ORIENTED_EDGE ( 'NONE', *, *, #28235, .T. ) ; +#11099 = ORIENTED_EDGE ( 'NONE', *, *, #43897, .T. ) ; +#11100 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428500, 47.42318720225497200, -28.70555803802996700 ) ) ; +#11101 = ORIENTED_EDGE ( 'NONE', *, *, #33016, .T. ) ; +#11102 = CONICAL_SURFACE ( 'NONE', #1194, 10.00000000000009600, 0.7853981633974447300 ) ; +#11103 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 28.66666666666668600, 1.294441961969997200 ) ) ; +#11104 = AXIS2_PLACEMENT_3D ( 'NONE', #70450, #33201, #76712 ) ; +#11105 = ORIENTED_EDGE ( 'NONE', *, *, #21963, .T. ) ; +#11106 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 70.16749699759751000, -28.20555803803014400 ) ) ; +#11107 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#11108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11109 = EDGE_LOOP ( 'NONE', ( #19599, #12443, #23663 ) ) ; +#11110 = AXIS2_PLACEMENT_3D ( 'NONE', #19788, #45015, #32554 ) ; +#11111 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 70.07141756547893900, -28.70555803802997700 ) ) ; +#11112 = ORIENTED_EDGE ( 'NONE', *, *, #73145, .T. ) ; +#11113 = CARTESIAN_POINT ( 'NONE', ( -7.056480806825619300, 44.45000000000001700, 3.495062964585525600 ) ) ; +#11114 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#11115 = EDGE_CURVE ( 'NONE', #24568, #63545, #33558, .T. ) ; +#11116 = FACE_OUTER_BOUND ( 'NONE', #26472, .T. ) ; +#11117 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 31.00000000000001400, -1.205558038030002800 ) ) ; +#11118 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#11119 = AXIS2_PLACEMENT_3D ( 'NONE', #71872, #40845, #28392 ) ; +#11120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11122 = AXIS2_PLACEMENT_3D ( 'NONE', #5975, #49448, #12233 ) ; +#11123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11125 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507569900, 49.07379779496242400, -28.70555803802996700 ) ) ; +#11126 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 14.36787096422371100, -28.37244029424739000 ) ) ; +#11127 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280447300, 67.94142842854286400, -28.37229765499331800 ) ) ; +#11128 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416056200, 29.08874248361071200, -28.53740755999534100 ) ) ; +#11129 = CARTESIAN_POINT ( 'NONE', ( 20.27859120529307500, 7.360704903989665500, -27.19888693026085800 ) ) ; +#11130 = AXIS2_PLACEMENT_3D ( 'NONE', #30895, #12128, #37109 ) ; +#11131 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 36.22261628933270600, -28.70555803802995200 ) ) ; +#11132 = CONICAL_SURFACE ( 'NONE', #69028, 10.50000000000009200, 0.7853981633974482800 ) ; +#11133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11134 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#11135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52465, #15243, #71271, #33999 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453811517400, 0.0005317208426589209000 ), + .UNSPECIFIED. ) ; +#11136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11137 = CARTESIAN_POINT ( 'NONE', ( 19.00961714316552100, 99.61923434441170900, -24.67984812920122900 ) ) ; +#11138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11140 = VERTEX_POINT ( 'NONE', #14319 ) ; +#11139 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11141 = ADVANCED_FACE ( 'NONE', ( #17028 ), #15066, .T. ) ; +#11142 = ORIENTED_EDGE ( 'NONE', *, *, #23176, .F. ) ; +#11143 = ADVANCED_FACE ( 'NONE', ( #452 ), #33346, .T. ) ; +#11144 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662741760500, 63.66464174796052300, -28.53896444442203500 ) ) ; +#11145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11147 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 81.43650294695081000, -28.30782889147504700 ) ) ; +#11148 = CIRCLE ( 'NONE', #74565, 9.500000000000097700 ) ; +#11149 = ORIENTED_EDGE ( 'NONE', *, *, #80547, .F. ) ; +#11150 = CONICAL_SURFACE ( 'NONE', #40863, 10.00000000000009200, 0.7853981633974447300 ) ; +#11152 = EDGE_CURVE ( 'NONE', #38367, #1355, #31630, .T. ) ; +#11151 = ORIENTED_EDGE ( 'NONE', *, *, #79033, .T. ) ; +#11153 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 34.50000000000000000, -7.061964498581022400 ) ) ; +#11154 = CARTESIAN_POINT ( 'NONE', ( 10.95973104149358700, 41.37561462481245700, -28.30309985153376200 ) ) ; +#11155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11156 = EDGE_CURVE ( 'NONE', #3142, #50418, #64741, .T. ) ; +#11157 = VERTEX_POINT ( 'NONE', #8569 ) ; +#11158 = FACE_OUTER_BOUND ( 'NONE', #21404, .T. ) ; +#11159 = CIRCLE ( 'NONE', #1740, 10.00000000000009400 ) ; +#11160 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.99747404049738400, -28.26641963845862500 ) ) ; +#11161 = ORIENTED_EDGE ( 'NONE', *, *, #45923, .T. ) ; +#11162 = VERTEX_POINT ( 'NONE', #52071 ) ; +#11163 = ORIENTED_EDGE ( 'NONE', *, *, #39535, .T. ) ; +#11164 = CARTESIAN_POINT ( 'NONE', ( -4.035907765261590000, 28.50212297965120500, -28.25344967589748200 ) ) ; +#11165 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#11166 = CARTESIAN_POINT ( 'NONE', ( -4.487136900612132000, 57.14999999999996300, -9.548735616529556900 ) ) ; +#11167 = EDGE_CURVE ( 'NONE', #13513, #40831, #39746, .T. ) ; +#11168 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38874, #76165, #51377, #14173 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082132378400E-007, 0.0007679735311067931200 ), + .UNSPECIFIED. ) ; +#11169 = VECTOR ( 'NONE', #69072, 1000.000000000000000 ) ; +#11170 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#11171 = ORIENTED_EDGE ( 'NONE', *, *, #34306, .F. ) ; +#11172 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#11173 = EDGE_CURVE ( 'NONE', #2565, #14341, #25316, .T. ) ; +#11174 = FACE_OUTER_BOUND ( 'NONE', #44428, .T. ) ; +#11175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11176 = EDGE_CURVE ( 'NONE', #74849, #58523, #10843, .T. ) ; +#11177 = ORIENTED_EDGE ( 'NONE', *, *, #32178, .T. ) ; +#11178 = ORIENTED_EDGE ( 'NONE', *, *, #43324, .F. ) ; +#11179 = ORIENTED_EDGE ( 'NONE', *, *, #15305, .T. ) ; +#11180 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11181 = ORIENTED_EDGE ( 'NONE', *, *, #17841, .T. ) ; +#11182 = ORIENTED_EDGE ( 'NONE', *, *, #22611, .F. ) ; +#11183 = ORIENTED_EDGE ( 'NONE', *, *, #67676, .T. ) ; +#11184 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459551700, 62.51973550835661100, -28.70555803802997700 ) ) ; +#11185 = CARTESIAN_POINT ( 'NONE', ( -17.24454976001813800, 8.877725119990932600, -28.45040264298921800 ) ) ; +#11186 = FACE_OUTER_BOUND ( 'NONE', #4993, .T. ) ; +#11187 = VERTEX_POINT ( 'NONE', #52621 ) ; +#11188 = EDGE_CURVE ( 'NONE', #42352, #11197, #79309, .T. ) ; +#11189 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153682400, 70.79999999999998300, -28.55171188418376000 ) ) ; +#11190 = EDGE_CURVE ( 'NONE', #60285, #73086, #76396, .T. ) ; +#11191 = EDGE_CURVE ( 'NONE', #17172, #43972, #77145, .T. ) ; +#11192 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 71.43945992495532900, -28.34042301926881200 ) ) ; +#11193 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25073, #80295, #37543, #302 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721114985600E-007, 0.001076779618376916000 ), + .UNSPECIFIED. ) ; +#11194 = EDGE_LOOP ( 'NONE', ( #44707, #9657, #79907, #56216, #77190, #13601, #59240 ) ) ; +#11195 = AXIS2_PLACEMENT_3D ( 'NONE', #69787, #32530, #76041 ) ; +#11196 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11197 = VERTEX_POINT ( 'NONE', #52896 ) ; +#11198 = CYLINDRICAL_SURFACE ( 'NONE', #79950, 10.00000000000000200 ) ; +#11199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11200 = AXIS2_PLACEMENT_3D ( 'NONE', #25211, #68718, #31483 ) ; +#11201 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 3.000000000000002200, -6.205558038030003100 ) ) ; +#11202 = AXIS2_PLACEMENT_3D ( 'NONE', #64818, #27545, #71039 ) ; +#11203 = AXIS2_PLACEMENT_3D ( 'NONE', #53951, #16706, #60236 ) ; +#11204 = CARTESIAN_POINT ( 'NONE', ( -15.41232936306066200, 10.39604671417950500, -28.70555803803002000 ) ) ; +#11205 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 43.16666666666669300, -9.205558038030003900 ) ) ; +#11206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11207 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#11208 = CONICAL_SURFACE ( 'NONE', #64270, 10.50000000000009600, 0.7853981633974500600 ) ; +#11209 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#11210 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 8.333333333333344600, 5.722645192245503900 ) ) ; +#11211 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39185, #32948, #51405, #1931 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555313487100E-007, 0.0009605145132142484300 ), + .UNSPECIFIED. ) ; +#11212 = EDGE_LOOP ( 'NONE', ( #23580, #33593, #28204, #19528 ) ) ; +#11213 = ORIENTED_EDGE ( 'NONE', *, *, #13302, .T. ) ; +#11214 = FACE_OUTER_BOUND ( 'NONE', #50460, .T. ) ; +#11215 = AXIS2_PLACEMENT_3D ( 'NONE', #18971, #31240, #68752 ) ; +#11216 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#11217 = EDGE_CURVE ( 'NONE', #22368, #45518, #62703, .T. ) ; +#11218 = ORIENTED_EDGE ( 'NONE', *, *, #16289, .T. ) ; +#11219 = ADVANCED_FACE ( 'NONE', ( #46172 ), #44205, .F. ) ; +#11220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11221 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#11222 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#11223 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11224 = CIRCLE ( 'NONE', #19272, 9.500000000000099500 ) ; +#11225 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 71.46283204837337200, -28.48697406221667400 ) ) ; +#11226 = CIRCLE ( 'NONE', #45460, 10.00000000000009600 ) ; +#11227 = ORIENTED_EDGE ( 'NONE', *, *, #44929, .T. ) ; +#11228 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801594600, 50.90033558196089600, -28.70555803803014400 ) ) ; +#11229 = EDGE_CURVE ( 'NONE', #66358, #44354, #60826, .T. ) ; +#11230 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11231 = FACE_OUTER_BOUND ( 'NONE', #75669, .T. ) ; +#11232 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11234 = AXIS2_PLACEMENT_3D ( 'NONE', #42846, #42566, #55347 ) ; +#11235 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#11236 = EDGE_LOOP ( 'NONE', ( #11474, #15519, #41474 ) ) ; +#11237 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807188600, 64.80000000000004000, -28.70555803802997700 ) ) ; +#11238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11240 = ORIENTED_EDGE ( 'NONE', *, *, #9482, .T. ) ; +#11239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11241 = ADVANCED_FACE ( 'NONE', ( #18958 ), #75405, .T. ) ; +#11242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11244 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#11245 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580925600, 11.23263087059576300, -28.67620115463453300 ) ) ; +#11246 = CONICAL_SURFACE ( 'NONE', #55601, 10.00000000000009600, 0.7853981633974482800 ) ; +#11247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11248 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537160800, 90.34267608797586000, -28.20555803803014400 ) ) ; +#11249 = FACE_OUTER_BOUND ( 'NONE', #52727, .T. ) ; +#11250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11251 = ORIENTED_EDGE ( 'NONE', *, *, #55947, .F. ) ; +#11252 = AXIS2_PLACEMENT_3D ( 'NONE', #17576, #61098, #23837 ) ; +#11253 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 86.76150692817282100, -28.68631150211663100 ) ) ; +#11254 = EDGE_LOOP ( 'NONE', ( #18959, #28448, #68581 ) ) ; +#11255 = ORIENTED_EDGE ( 'NONE', *, *, #25942, .T. ) ; +#11256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11257 = VERTEX_POINT ( 'NONE', #34700 ) ; +#11258 = CARTESIAN_POINT ( 'NONE', ( 16.44673298322651100, 80.11613117245406100, -28.57420149390119900 ) ) ; +#11259 = ORIENTED_EDGE ( 'NONE', *, *, #54409, .F. ) ; +#11260 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 75.79999999999998300, -28.20555803802997700 ) ) ; +#11261 = FACE_OUTER_BOUND ( 'NONE', #47174, .T. ) ; +#11262 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11263 = VERTEX_POINT ( 'NONE', #65714 ) ; +#11264 = AXIS2_PLACEMENT_3D ( 'NONE', #13255, #75775, #26037 ) ; +#11265 = ORIENTED_EDGE ( 'NONE', *, *, #41087, .F. ) ; +#11266 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#11267 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825400, 69.66414768974044600, -28.38420446581291400 ) ) ; +#11269 = ADVANCED_FACE ( 'NONE', ( #11186 ), #71974, .T. ) ; +#11268 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52594, #77372, #58867, #21635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.184273249252990900E-005, 0.0007677744771234635000 ), + .UNSPECIFIED. ) ; +#11270 = VERTEX_POINT ( 'NONE', #53450 ) ; +#11271 = CIRCLE ( 'NONE', #55025, 10.50000000000009600 ) ; +#11272 = EDGE_CURVE ( 'NONE', #51373, #30876, #48132, .T. ) ; +#11273 = ORIENTED_EDGE ( 'NONE', *, *, #49369, .T. ) ; +#11274 = FACE_OUTER_BOUND ( 'NONE', #39678, .T. ) ; +#11275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11276 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 49.16666666666667900, -3.349151577478988200 ) ) ; +#11277 = CARTESIAN_POINT ( 'NONE', ( 16.32232026313008800, 90.10230989102886700, -28.61774594593744000 ) ) ; +#11278 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11279 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11280 = EDGE_CURVE ( 'NONE', #70514, #49270, #48199, .T. ) ; +#11281 = EDGE_CURVE ( 'NONE', #2521, #47186, #33769, .T. ) ; +#11282 = FACE_OUTER_BOUND ( 'NONE', #38626, .T. ) ; +#11283 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11284 = CIRCLE ( 'NONE', #73387, 10.00000000000009200 ) ; +#11285 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#11286 = VERTEX_POINT ( 'NONE', #65978 ) ; +#11287 = ORIENTED_EDGE ( 'NONE', *, *, #43209, .F. ) ; +#11288 = CIRCLE ( 'NONE', #7159, 10.00000000000009200 ) ; +#11289 = AXIS2_PLACEMENT_3D ( 'NONE', #53298, #78066, #22298 ) ; +#11290 = EDGE_CURVE ( 'NONE', #35816, #71408, #19303, .T. ) ; +#11291 = EDGE_CURVE ( 'NONE', #40874, #7944, #4840, .T. ) ; +#11292 = ORIENTED_EDGE ( 'NONE', *, *, #8520, .T. ) ; +#11293 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11294 = CARTESIAN_POINT ( 'NONE', ( -9.254548258615024300, 39.09617684379259100, -28.64146614751468400 ) ) ; +#11295 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11296 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 81.43945992495501700, -28.34042301926918800 ) ) ; +#11297 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 20.50000000000000700, 6.847000845227646500 ) ) ; +#11298 = EDGE_CURVE ( 'NONE', #72149, #26473, #77351, .T. ) ; +#11299 = CIRCLE ( 'NONE', #79685, 9.500000000000099500 ) ; +#11300 = AXIS2_PLACEMENT_3D ( 'NONE', #40062, #2785, #46285 ) ; +#11301 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155400, 90.69966441803842400, -28.70555803803047500 ) ) ; +#11302 = CONICAL_SURFACE ( 'NONE', #8442, 10.50000000000009600, 0.7853981633974500600 ) ; +#11303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11304 = ORIENTED_EDGE ( 'NONE', *, *, #52961, .T. ) ; +#11305 = FACE_OUTER_BOUND ( 'NONE', #45680, .T. ) ; +#11306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18576, #37048, #68333, #31101 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286277920800E-007, 0.0007303759720926886900 ), + .UNSPECIFIED. ) ; +#11307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11308 = ORIENTED_EDGE ( 'NONE', *, *, #57015, .T. ) ; +#11309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11310 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#11311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11312 = ORIENTED_EDGE ( 'NONE', *, *, #11188, .T. ) ; +#11313 = AXIS2_PLACEMENT_3D ( 'NONE', #54978, #17746, #61278 ) ; +#11314 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432849900, 28.85339758437810100, -28.20555803802994200 ) ) ; +#11315 = AXIS2_PLACEMENT_3D ( 'NONE', #26812, #70297, #33046 ) ; +#11316 = CONICAL_SURFACE ( 'NONE', #43559, 10.50000000000009600, 0.7853981633974518300 ) ; +#11317 = EDGE_CURVE ( 'NONE', #2702, #41995, #71161, .T. ) ; +#11318 = ADVANCED_FACE ( 'NONE', ( #58845 ), #25782, .T. ) ; +#11319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11320 = FACE_OUTER_BOUND ( 'NONE', #49111, .T. ) ; +#11321 = ORIENTED_EDGE ( 'NONE', *, *, #30852, .F. ) ; +#11322 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142000, 30.96868088498121800, -28.51286550264512000 ) ) ; +#11323 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 55.00000000000000000, -6.205558038030003100 ) ) ; +#11324 = EDGE_LOOP ( 'NONE', ( #15349, #52815, #36886 ) ) ; +#11325 = CARTESIAN_POINT ( 'NONE', ( 17.58124756195452300, 7.418752438044085900, -28.44704640668254900 ) ) ; +#11326 = CARTESIAN_POINT ( 'NONE', ( -11.72076650305797700, 80.09951448976264000, -28.63282631410026700 ) ) ; +#11327 = ORIENTED_EDGE ( 'NONE', *, *, #21058, .F. ) ; +#11328 = ORIENTED_EDGE ( 'NONE', *, *, #32376, .F. ) ; +#11329 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653751600, 71.39409401757623600, -28.39369363572359700 ) ) ; +#11330 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#11331 = CONICAL_SURFACE ( 'NONE', #63644, 10.00000000000009600, 0.7853981633974447300 ) ; +#11332 = PLANE ( 'NONE', #66988 ) ; +#11333 = ADVANCED_FACE ( 'NONE', ( #29705 ), #40337, .F. ) ; +#11334 = FACE_OUTER_BOUND ( 'NONE', #44808, .T. ) ; +#11335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11336 = AXIS2_PLACEMENT_3D ( 'NONE', #54931, #17693, #61224 ) ; +#11338 = EDGE_LOOP ( 'NONE', ( #1324, #48952, #11772, #24829 ) ) ; +#11337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11339 = EDGE_CURVE ( 'NONE', #44986, #4991, #56907, .T. ) ; +#11340 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#11341 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 44.37738371066728100, -28.70555803802997700 ) ) ; +#11342 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 77.94142842854310500, -28.20555803802997700 ) ) ; +#11343 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540438500, 59.08026449164336900, -28.70555803802997400 ) ) ; +#11344 = CIRCLE ( 'NONE', #38792, 10.00000000000009200 ) ; +#11345 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11346 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#11347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11348 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11349 = ADVANCED_FACE ( 'NONE', ( #13145 ), #71501, .F. ) ; +#11350 = VERTEX_POINT ( 'NONE', #17267 ) ; +#11351 = CONICAL_SURFACE ( 'NONE', #39163, 10.00000000000009400, 0.7853981633974447300 ) ; +#11352 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985000, 81.25732391202392100, -28.20555803802997700 ) ) ; +#11353 = AXIS2_PLACEMENT_3D ( 'NONE', #54318, #4277, #17074 ) ; +#11354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11355 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050736700, 28.07379779496234900, -28.70555803802994200 ) ) ; +#11356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11357 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804061600, 73.65857157145700300, -28.37229765499282100 ) ) ; +#11358 = CARTESIAN_POINT ( 'NONE', ( 3.243064933257830100, 81.43482203710631500, -28.29548531138974400 ) ) ; +#11359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#11361 = ORIENTED_EDGE ( 'NONE', *, *, #70490, .T. ) ; +#11363 = ADVANCED_FACE ( 'NONE', ( #9183 ), #38373, .T. ) ; +#11362 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13172, #25676, #75427, #38133 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520682700, 0.004414519045340945000 ), + .UNSPECIFIED. ) ; +#11364 = AXIS2_PLACEMENT_3D ( 'NONE', #61788, #24512, #68023 ) ; +#11365 = CIRCLE ( 'NONE', #67821, 10.00000000000009200 ) ; +#11367 = EDGE_LOOP ( 'NONE', ( #29363, #10760, #64477, #9455 ) ) ; +#11366 = CARTESIAN_POINT ( 'NONE', ( 14.16026969497007200, 8.846142569402799100, -28.63881122220705300 ) ) ; +#11368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11369 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 61.33333333333334300, 8.320721403598817300 ) ) ; +#11370 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53925, #16681, #72724, #35466 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.796294493718589100E-007, 0.0007679767755145114100 ), + .UNSPECIFIED. ) ; +#11371 = FACE_OUTER_BOUND ( 'NONE', #52596, .T. ) ; +#11372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11373 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56504, #25248, #6993, #50480 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549584933833200E-007, 0.0002592578639937699100 ), + .UNSPECIFIED. ) ; +#11374 = VERTEX_POINT ( 'NONE', #73305 ) ; +#11375 = CONICAL_SURFACE ( 'NONE', #67597, 10.50000000000009800, 0.7853981633974518300 ) ; +#11376 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 26.50000000000001100, -4.865812075874393000 ) ) ; +#11377 = AXIS2_PLACEMENT_3D ( 'NONE', #80287, #43004, #5760 ) ; +#11378 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#11379 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11380 = EDGE_LOOP ( 'NONE', ( #1554, #36463, #64176 ) ) ; +#11381 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#11382 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50137, #68934, #6918, #50394 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572924100, 0.0008043487657982741600 ), + .UNSPECIFIED. ) ; +#11383 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919000, 24.55000000000000100, -28.65220501466659500 ) ) ; +#11384 = FACE_OUTER_BOUND ( 'NONE', #72302, .T. ) ; +#11385 = FACE_OUTER_BOUND ( 'NONE', #50668, .T. ) ; +#11386 = ORIENTED_EDGE ( 'NONE', *, *, #48508, .F. ) ; +#11387 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965628600, 17.92298334620783600, -28.20555803802992800 ) ) ; +#11388 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 28.83333333333333900, 1.741883078712340300 ) ) ; +#11389 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11390 = ORIENTED_EDGE ( 'NONE', *, *, #42441, .F. ) ; +#11391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11392 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654443800, 71.32559822014155800, -28.29986836858032000 ) ) ; +#11393 = ORIENTED_EDGE ( 'NONE', *, *, #50541, .T. ) ; +#11394 = CARTESIAN_POINT ( 'NONE', ( -8.298286669309963100, 9.866394758536086900, -28.70555803803002000 ) ) ; +#11395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11397 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985125600, 15.00238095238065100, -28.70555803802992800 ) ) ; +#11398 = CARTESIAN_POINT ( 'NONE', ( -4.656953934541306200, 89.08026449163870100, -28.70555803802997700 ) ) ; +#11399 = CIRCLE ( 'NONE', #40245, 9.500000000000097700 ) ; +#11400 = ORIENTED_EDGE ( 'NONE', *, *, #69533, .T. ) ; +#11401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11403 = CARTESIAN_POINT ( 'NONE', ( -11.00202449666890700, 39.28907889423218300, -28.25433304472393600 ) ) ; +#11404 = ORIENTED_EDGE ( 'NONE', *, *, #70392, .T. ) ; +#11405 = ORIENTED_EDGE ( 'NONE', *, *, #67400, .T. ) ; +#11406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11407 = EDGE_CURVE ( 'NONE', #12367, #48353, #54945, .T. ) ; +#11408 = ORIENTED_EDGE ( 'NONE', *, *, #33425, .T. ) ; +#11409 = CARTESIAN_POINT ( 'NONE', ( 17.62958941807337600, 96.85917769515556600, -27.22353490119159900 ) ) ; +#11410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11411 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11412 = CONICAL_SURFACE ( 'NONE', #22404, 10.00000000000009200, 0.7853981633974447300 ) ; +#11413 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#11414 = ORIENTED_EDGE ( 'NONE', *, *, #6177, .T. ) ; +#11415 = CARTESIAN_POINT ( 'NONE', ( 9.487278546916584800, 81.47860033657553900, -28.56001054660935200 ) ) ; +#11416 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77727, #34220, #9447, #52960 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978776983000, 0.0006311001363622048400 ), + .UNSPECIFIED. ) ; +#11417 = ADVANCED_FACE ( 'NONE', ( #42279 ), #69531, .F. ) ; +#11418 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11419 = EDGE_CURVE ( 'NONE', #65427, #26492, #56689, .T. ) ; +#11420 = ORIENTED_EDGE ( 'NONE', *, *, #39585, .T. ) ; +#11421 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 70.69966441803892100, -28.70555803802997700 ) ) ; +#11422 = CIRCLE ( 'NONE', #26813, 9.500000000000095900 ) ; +#11423 = AXIS2_PLACEMENT_3D ( 'NONE', #45331, #63898, #8087 ) ; +#11424 = EDGE_LOOP ( 'NONE', ( #23006, #65592, #20625 ) ) ; +#11425 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 32.33333333333333600, 2.794441961969998300 ) ) ; +#11426 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11427 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265455600, 51.32559822014179900, -28.29986836858018200 ) ) ; +#11428 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .F. ) ; +#11429 = CIRCLE ( 'NONE', #68856, 10.00000000000009200 ) ; +#11430 = FACE_OUTER_BOUND ( 'NONE', #29398, .T. ) ; +#11431 = CARTESIAN_POINT ( 'NONE', ( 2.487410011450783600, 70.12140959735981500, -28.55996453402237000 ) ) ; +#11432 = ADVANCED_FACE ( 'NONE', ( #21867 ), #36442, .F. ) ; +#11433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11434 = AXIS2_PLACEMENT_3D ( 'NONE', #25077, #68596, #31347 ) ; +#11435 = CARTESIAN_POINT ( 'NONE', ( 4.211837537434728800, 57.15000000000000600, -9.350062722909418900 ) ) ; +#11437 = ORIENTED_EDGE ( 'NONE', *, *, #54169, .T. ) ; +#11436 = EDGE_CURVE ( 'NONE', #57484, #39561, #42217, .T. ) ; +#11438 = EDGE_CURVE ( 'NONE', #20464, #24516, #27815, .T. ) ; +#11439 = AXIS2_PLACEMENT_3D ( 'NONE', #55148, #17905, #61451 ) ; +#11440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11441 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 67.92318720225497900, -28.70555803802997700 ) ) ; +#11442 = CARTESIAN_POINT ( 'NONE', ( 3.935438998026783900, 51.50961459723748700, -28.29483879644641700 ) ) ; +#11443 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#11444 = CONICAL_SURFACE ( 'NONE', #48947, 10.00000000000009200, 0.7853981633974447300 ) ; +#11445 = ORIENTED_EDGE ( 'NONE', *, *, #74839, .T. ) ; +#11446 = ADVANCED_FACE ( 'NONE', ( #27735 ), #3346, .T. ) ; +#11447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11448 = AXIS2_PLACEMENT_3D ( 'NONE', #9443, #52952, #15721 ) ; +#11449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11450 = ORIENTED_EDGE ( 'NONE', *, *, #5559, .F. ) ; +#11451 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805687200, 47.18572799237468000, -28.67630847257079200 ) ) ; +#11452 = EDGE_CURVE ( 'NONE', #13368, #17139, #19921, .T. ) ; +#11453 = ORIENTED_EDGE ( 'NONE', *, *, #28727, .F. ) ; +#11454 = CARTESIAN_POINT ( 'NONE', ( -17.22125914545564400, 18.16476764525110700, -28.30311733712044700 ) ) ; +#11455 = CONICAL_SURFACE ( 'NONE', #51340, 10.00000000000009200, 0.7853981633974447300 ) ; +#11456 = AXIS2_PLACEMENT_3D ( 'NONE', #73855, #36560, #80098 ) ; +#11457 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495034000, 49.19228657120673600, -28.53891855579989600 ) ) ; +#11458 = ORIENTED_EDGE ( 'NONE', *, *, #46981, .T. ) ; +#11459 = ADVANCED_FACE ( 'NONE', ( #23827 ), #34519, .F. ) ; +#11460 = CONICAL_SURFACE ( 'NONE', #64107, 10.00000000000009400, 0.7853981633974447300 ) ; +#11461 = ORIENTED_EDGE ( 'NONE', *, *, #31545, .T. ) ; +#11462 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#11463 = AXIS2_PLACEMENT_3D ( 'NONE', #78958, #41653, #4400 ) ; +#11464 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11465 = EDGE_LOOP ( 'NONE', ( #42782, #13268, #59312, #4107, #57809 ) ) ; +#11466 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 0.8333333333333370300, 3.794441961969996900 ) ) ; +#11467 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11468 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11469 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 41.00000000000000700, 6.794441961969995200 ) ) ; +#11470 = FACE_OUTER_BOUND ( 'NONE', #48043, .T. ) ; +#11471 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76357, #20620, #26878, #70361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249591000, 0.0007802304471361604800 ), + .UNSPECIFIED. ) ; +#11472 = CONICAL_SURFACE ( 'NONE', #42257, 10.50000000000009600, 0.7853981633974518300 ) ; +#11473 = AXIS2_PLACEMENT_3D ( 'NONE', #51265, #14067, #57566 ) ; +#11474 = ORIENTED_EDGE ( 'NONE', *, *, #53392, .F. ) ; +#11475 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467681300, 40.76893971292317100, -28.57333386111099200 ) ) ; +#11476 = ORIENTED_EDGE ( 'NONE', *, *, #16164, .F. ) ; +#11477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11478 = VERTEX_POINT ( 'NONE', #24330 ) ; +#11479 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#11480 = ORIENTED_EDGE ( 'NONE', *, *, #48183, .F. ) ; +#11481 = ORIENTED_EDGE ( 'NONE', *, *, #9779, .F. ) ; +#11482 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 6.166666666666695400, -9.205558038030003900 ) ) ; +#11483 = VERTEX_POINT ( 'NONE', #5826 ) ; +#11484 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999618100, 63.89610994602588800, -28.37519436813201800 ) ) ; +#11485 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217503000, 51.43945992495501000, -28.34042301926905700 ) ) ; +#11486 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 20.52858243452105900, -28.70555803802995200 ) ) ; +#11487 = AXIS2_PLACEMENT_3D ( 'NONE', #9511, #53019, #15783 ) ; +#11488 = ORIENTED_EDGE ( 'NONE', *, *, #73221, .T. ) ; +#11489 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48897, #48631, #55172, #17924 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354304588400E-007, 0.0004318366892330800600 ), + .UNSPECIFIED. ) ; +#11490 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571447500, 49.57141756547891700, -28.70555803802996700 ) ) ; +#11491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11492 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996800, 38.41684396980713200, -28.70555803802995200 ) ) ; +#11493 = EDGE_CURVE ( 'NONE', #25711, #23507, #67595, .T. ) ; +#11494 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964000, 28.65930907398620100, -28.35186440610856500 ) ) ; +#11495 = ORIENTED_EDGE ( 'NONE', *, *, #41401, .F. ) ; +#11496 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11497 = CIRCLE ( 'NONE', #22004, 10.00000000000009600 ) ; +#11498 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171144800, 29.79999999999999000, -28.57107744631859000 ) ) ; +#11499 = AXIS2_PLACEMENT_3D ( 'NONE', #78436, #41153, #3872 ) ; +#11500 = ORIENTED_EDGE ( 'NONE', *, *, #29202, .T. ) ; +#11501 = CARTESIAN_POINT ( 'NONE', ( -16.02235059838246700, 50.54999999999999700, -28.65316072681825300 ) ) ; +#11502 = ORIENTED_EDGE ( 'NONE', *, *, #48747, .T. ) ; +#11503 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857188200, 18.07141756547853000, -28.70555803803009500 ) ) ; +#11504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77990, #34477, #9714, #53222 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698241841700E-007, 0.0008724363063899898600 ), + .UNSPECIFIED. ) ; +#11505 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973397400, 84.26498457889739800, -28.70555803803002000 ) ) ; +#11506 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432841900, 39.35339758437810100, -28.20555803802995200 ) ) ; +#11507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11508 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#11509 = FACE_OUTER_BOUND ( 'NONE', #37066, .T. ) ; +#11510 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819371400, 79.94924284854695900, -28.20555803802997700 ) ) ; +#11511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11512 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929812600, 55.80000000000000400, -28.70555803802997700 ) ) ; +#11513 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455966900, 51.52472935029898300, -28.39317435246130500 ) ) ; +#11515 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52529, #27556, #64831, #15296 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978776974600, 0.0006311001363622048400 ), + .UNSPECIFIED. ) ; +#11514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11516 = ORIENTED_EDGE ( 'NONE', *, *, #13709, .T. ) ; +#11517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11518 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868444700, 20.08486215879780100, -28.32821106612154300 ) ) ; +#11519 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 89.97246552159111800, -28.38801640354855100 ) ) ; +#11520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11521 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11522 = EDGE_CURVE ( 'NONE', #10281, #2378, #7235, .T. ) ; +#11523 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 9.722944711948578300, -28.20555803802994200 ) ) ; +#11524 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#11525 = FACE_OUTER_BOUND ( 'NONE', #16086, .T. ) ; +#11526 = ORIENTED_EDGE ( 'NONE', *, *, #58326, .F. ) ; +#11527 = EDGE_CURVE ( 'NONE', #49172, #56981, #52978, .T. ) ; +#11528 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#11529 = ORIENTED_EDGE ( 'NONE', *, *, #80043, .T. ) ; +#11530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11531 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 38.97246552159109700, -28.38801640354855500 ) ) ; +#11532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#11533 = EDGE_CURVE ( 'NONE', #72435, #37818, #13341, .T. ) ; +#11534 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 22.65857157145701000, -28.20555803802995200 ) ) ; +#11535 = EDGE_CURVE ( 'NONE', #79940, #41971, #51000, .T. ) ; +#11536 = AXIS2_PLACEMENT_3D ( 'NONE', #8997, #52521, #15290 ) ; +#11537 = CIRCLE ( 'NONE', #29685, 10.50000000000009200 ) ; +#11538 = CARTESIAN_POINT ( 'NONE', ( 12.68596550977832000, 35.04999999999996900, -28.37321477197629300 ) ) ; +#11539 = EDGE_LOOP ( 'NONE', ( #56559, #63681, #58538 ) ) ; +#11540 = ORIENTED_EDGE ( 'NONE', *, *, #19613, .F. ) ; +#11541 = ADVANCED_FACE ( 'NONE', ( #17965 ), #68372, .T. ) ; +#11542 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 47.00000000000000700, -1.205558038030005300 ) ) ; +#11543 = ORIENTED_EDGE ( 'NONE', *, *, #42599, .F. ) ; +#11544 = EDGE_CURVE ( 'NONE', #6698, #74314, #65669, .T. ) ; +#11545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11546 = EDGE_CURVE ( 'NONE', #47662, #79198, #5310, .T. ) ; +#11547 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41062, #78337, #10058, #53574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.545462408987673500E-016, 0.003012607932589797500 ), + .UNSPECIFIED. ) ; +#11548 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#11549 = EDGE_CURVE ( 'NONE', #23131, #47665, #1393, .T. ) ; +#11550 = ADVANCED_FACE ( 'NONE', ( #49056 ), #14060, .F. ) ; +#11551 = CONICAL_SURFACE ( 'NONE', #12362, 10.00000000000009200, 0.7853981633974447300 ) ; +#11552 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002700, 33.49926474563215400, -28.70555803802996700 ) ) ; +#11553 = CONICAL_SURFACE ( 'NONE', #26112, 10.00000000000009400, 0.7853981633974447300 ) ; +#11554 = VERTEX_POINT ( 'NONE', #75168 ) ; +#11555 = ORIENTED_EDGE ( 'NONE', *, *, #41004, .F. ) ; +#11556 = ORIENTED_EDGE ( 'NONE', *, *, #76321, .F. ) ; +#11557 = CIRCLE ( 'NONE', #25737, 10.00000000000009600 ) ; +#11558 = ORIENTED_EDGE ( 'NONE', *, *, #55817, .T. ) ; +#11559 = ORIENTED_EDGE ( 'NONE', *, *, #12600, .F. ) ; +#11560 = ORIENTED_EDGE ( 'NONE', *, *, #69193, .F. ) ; +#11561 = ORIENTED_EDGE ( 'NONE', *, *, #53339, .T. ) ; +#11562 = ORIENTED_EDGE ( 'NONE', *, *, #17841, .F. ) ; +#11563 = CARTESIAN_POINT ( 'NONE', ( -15.16936139502963100, 15.40150809589759200, -28.70555803803001600 ) ) ; +#11564 = EDGE_CURVE ( 'NONE', #48339, #72825, #79645, .T. ) ; +#11565 = AXIS2_PLACEMENT_3D ( 'NONE', #50730, #7492, #38476 ) ; +#11566 = AXIS2_PLACEMENT_3D ( 'NONE', #4224, #16739, #60286 ) ; +#11567 = ORIENTED_EDGE ( 'NONE', *, *, #51852, .F. ) ; +#11568 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 39.13131911501876200, -28.51286550264508800 ) ) ; +#11569 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507555000, 40.89456479767167000, -28.70555803802996700 ) ) ; +#11570 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#11571 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 18.33333333333333900, -6.705558038030005700 ) ) ; +#11572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11573 = CONICAL_SURFACE ( 'NONE', #69879, 10.00000000000009600, 0.7853981633974482800 ) ; +#11574 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .F. ) ; +#11575 = ORIENTED_EDGE ( 'NONE', *, *, #38338, .F. ) ; +#11576 = VERTEX_POINT ( 'NONE', #31651 ) ; +#11577 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#11578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11579 = FACE_OUTER_BOUND ( 'NONE', #19724, .T. ) ; +#11580 = AXIS2_PLACEMENT_3D ( 'NONE', #37646, #31442, #74951 ) ; +#11581 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950485600, 31.40771342879313700, -28.53891855579976400 ) ) ; +#11582 = EDGE_LOOP ( 'NONE', ( #79316, #61049, #8647, #53131, #72465 ) ) ; +#11583 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14015, #51222, #20270, #63807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067916000 ), + .UNSPECIFIED. ) ; +#11584 = ORIENTED_EDGE ( 'NONE', *, *, #70747, .F. ) ; +#11585 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 71.25732391202396300, -28.20555803802997700 ) ) ; +#11586 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448990000, 49.83333333333333600, -9.205558038030005700 ) ) ; +#11587 = AXIS2_PLACEMENT_3D ( 'NONE', #67705, #30468, #73972 ) ; +#11588 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310471400, 49.60230989102910800, -28.61774594594331600 ) ) ; +#11589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11590 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 52.83333333333335000, 3.794441961969996900 ) ) ; +#11591 = CONICAL_SURFACE ( 'NONE', #70782, 10.50000000000009600, 0.7853981633974500600 ) ; +#11592 = ORIENTED_EDGE ( 'NONE', *, *, #76670, .F. ) ; +#11593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11594 = EDGE_CURVE ( 'NONE', #49127, #13531, #65216, .T. ) ; +#11595 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492475400, 21.02620220503761000, -28.70555803802994200 ) ) ; +#11596 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49894, #43640, #56170, #18917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067841200 ), + .UNSPECIFIED. ) ; +#11597 = AXIS2_PLACEMENT_3D ( 'NONE', #44464, #7232, #50738 ) ; +#11598 = ORIENTED_EDGE ( 'NONE', *, *, #43573, .F. ) ; +#11599 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#11600 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11603 = AXIS2_PLACEMENT_3D ( 'NONE', #59104, #21856, #65402 ) ; +#11604 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999991600, 39.69949493661175700, -28.70555803802995200 ) ) ; +#11605 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807190400, 54.80000000000003300, -28.70555803802997700 ) ) ; +#11606 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434200, 83.66464174796017500, -28.53896444442245100 ) ) ; +#11607 = CARTESIAN_POINT ( 'NONE', ( -3.959729345560822500, 39.22438272935920600, -28.30310183417007500 ) ) ; +#11608 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769040400, 39.78860447109613600, -28.53900456328626600 ) ) ; +#11609 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11611 = AXIS2_PLACEMENT_3D ( 'NONE', #14708, #14976, #58498 ) ; +#11612 = CIRCLE ( 'NONE', #13471, 10.50000000000009600 ) ; +#11613 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990700, 29.19949493661175700, -28.70555803802994200 ) ) ; +#11614 = CIRCLE ( 'NONE', #38446, 10.50000000000009800 ) ; +#11615 = EDGE_LOOP ( 'NONE', ( #80729, #1526, #32998 ) ) ; +#11616 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252813000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#11617 = EDGE_LOOP ( 'NONE', ( #22490, #48415, #70190, #50439, #44165 ) ) ; +#11618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11619 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465429700, 30.10079448659600100, -28.70555803802995200 ) ) ; +#11620 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#11621 = EDGE_LOOP ( 'NONE', ( #29774, #45150, #7861, #2686 ) ) ; +#11622 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.16749699759769500, -28.20555803802997700 ) ) ; +#11623 = ADVANCED_FACE ( 'NONE', ( #30626 ), #61769, .T. ) ; +#11624 = CONICAL_SURFACE ( 'NONE', #37829, 10.50000000000009600, 0.7853981633974518300 ) ; +#11625 = VERTEX_POINT ( 'NONE', #44366 ) ; +#11626 = CIRCLE ( 'NONE', #72464, 9.500000000000095900 ) ; +#11627 = ORIENTED_EDGE ( 'NONE', *, *, #64164, .F. ) ; +#11628 = ORIENTED_EDGE ( 'NONE', *, *, #80520, .F. ) ; +#11629 = EDGE_CURVE ( 'NONE', #55143, #6811, #50682, .T. ) ; +#11630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11631 = EDGE_LOOP ( 'NONE', ( #59308, #8797, #6321, #64306, #45673, #2055 ) ) ; +#11632 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 59.16666666666667100, -12.20555803803000000 ) ) ; +#11633 = FACE_OUTER_BOUND ( 'NONE', #51627, .T. ) ; +#11634 = EDGE_CURVE ( 'NONE', #55345, #51553, #36258, .T. ) ; +#11635 = EDGE_LOOP ( 'NONE', ( #79311, #43453, #38267, #28907 ) ) ; +#11636 = ORIENTED_EDGE ( 'NONE', *, *, #17342, .T. ) ; +#11637 = ORIENTED_EDGE ( 'NONE', *, *, #51013, .T. ) ; +#11638 = ORIENTED_EDGE ( 'NONE', *, *, #64678, .F. ) ; +#11640 = ORIENTED_EDGE ( 'NONE', *, *, #38394, .F. ) ; +#11639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11641 = ADVANCED_FACE ( 'NONE', ( #80240 ), #28704, .F. ) ; +#11642 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 24.33333333333335000, 3.124568980892187500 ) ) ; +#11643 = ORIENTED_EDGE ( 'NONE', *, *, #44219, .F. ) ; +#11644 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571411600, 53.67681279774470200, -28.70555803803047500 ) ) ; +#11645 = EDGE_CURVE ( 'NONE', #2875, #54853, #21812, .T. ) ; +#11646 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77970, #34463, #9700, #53203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476221555972100E-007, 0.0002670039411972513500 ), + .UNSPECIFIED. ) ; +#11647 = ORIENTED_EDGE ( 'NONE', *, *, #68244, .T. ) ; +#11648 = CIRCLE ( 'NONE', #62050, 10.00000000000009400 ) ; +#11649 = EDGE_CURVE ( 'NONE', #55249, #12766, #7305, .T. ) ; +#11651 = EDGE_CURVE ( 'NONE', #34788, #50917, #73665, .T. ) ; +#11650 = ORIENTED_EDGE ( 'NONE', *, *, #14415, .T. ) ; +#11652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#11653 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .F. ) ; +#11654 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11655 = ORIENTED_EDGE ( 'NONE', *, *, #23533, .F. ) ; +#11656 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 26.66666666666668600, -6.705558038030000400 ) ) ; +#11657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11658 = ORIENTED_EDGE ( 'NONE', *, *, #24620, .T. ) ; +#11659 = ORIENTED_EDGE ( 'NONE', *, *, #7667, .F. ) ; +#11660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11661 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825243000, 90.16054007504463600, -28.34042301926880800 ) ) ; +#11662 = FACE_OUTER_BOUND ( 'NONE', #70580, .T. ) ; +#11663 = AXIS2_PLACEMENT_3D ( 'NONE', #59677, #22405, #65934 ) ; +#11664 = EDGE_LOOP ( 'NONE', ( #65678, #11480, #11575, #70608 ) ) ; +#11665 = EDGE_CURVE ( 'NONE', #20507, #18523, #59184, .T. ) ; +#11666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11667 = EDGE_CURVE ( 'NONE', #74175, #49395, #44671, .T. ) ; +#11668 = EDGE_CURVE ( 'NONE', #62131, #40425, #63716, .T. ) ; +#11670 = ORIENTED_EDGE ( 'NONE', *, *, #32600, .F. ) ; +#11669 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148417400, 13.09761904761919600, -28.70555803802992800 ) ) ; +#11671 = ADVANCED_FACE ( 'NONE', ( #16012 ), #59812, .F. ) ; +#11672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11673 = CARTESIAN_POINT ( 'NONE', ( -8.314034490221684900, 35.04999999999997600, -28.37321477197629300 ) ) ; +#11674 = AXIS2_PLACEMENT_3D ( 'NONE', #38189, #946, #44426 ) ; +#11675 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11676 = CIRCLE ( 'NONE', #11364, 10.00000000000009200 ) ; +#11677 = ORIENTED_EDGE ( 'NONE', *, *, #73360, .T. ) ; +#11678 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995900, 21.18315603019280900, -28.70555803802998400 ) ) ; +#11679 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13766, #7460, #63271, #20014 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880082970393800E-007, 0.0003101809493108755300 ), + .UNSPECIFIED. ) ; +#11680 = ORIENTED_EDGE ( 'NONE', *, *, #76300, .F. ) ; +#11681 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905200, 84.83849307182669000, -28.68631150211663400 ) ) ; +#11683 = ORIENTED_EDGE ( 'NONE', *, *, #65924, .T. ) ; +#11682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11684 = AXIS2_PLACEMENT_3D ( 'NONE', #35174, #78672, #41375 ) ; +#11685 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100889100, 17.62363993080119000, -28.38670679782149600 ) ) ; +#11686 = AXIS2_PLACEMENT_3D ( 'NONE', #43935, #12716, #432 ) ; +#11687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11688 = AXIS2_PLACEMENT_3D ( 'NONE', #249, #80785, #43744 ) ; +#11689 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475900, 14.04999999999976600, -28.20555803803009500 ) ) ; +#11690 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567223800, 49.85339758437807900, -28.20555803802996700 ) ) ; +#11691 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 79.41684396980637900, -28.70555803803024400 ) ) ; +#11692 = CONICAL_SURFACE ( 'NONE', #69678, 10.00000000000009600, 0.7853981633974482800 ) ; +#11693 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 30.16666666666668600, -3.349151577478988200 ) ) ; +#11694 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#11695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11696 = CIRCLE ( 'NONE', #64008, 10.00000000000009400 ) ; +#11697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44948, #63791, #57782, #20529 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.040834085586084300E-017, 0.002676326193402430900 ), + .UNSPECIFIED. ) ; +#11698 = ORIENTED_EDGE ( 'NONE', *, *, #25222, .T. ) ; +#11699 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#11700 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 18.34510448120794400, -28.37193179497692000 ) ) ; +#11701 = AXIS2_PLACEMENT_3D ( 'NONE', #35461, #78974, #60209 ) ; +#11702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11703 = CARTESIAN_POINT ( 'NONE', ( 7.976675312956619900, 57.14999999999997000, -3.932134655249927700 ) ) ; +#11704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11705 = CIRCLE ( 'NONE', #42478, 9.500000000000095900 ) ; +#11706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11707 = ORIENTED_EDGE ( 'NONE', *, *, #64719, .T. ) ; +#11708 = ORIENTED_EDGE ( 'NONE', *, *, #8420, .F. ) ; +#11709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11710 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 73.43454006867176500, -28.70555803802999500 ) ) ; +#11711 = CARTESIAN_POINT ( 'NONE', ( -3.628494729608064500, 61.43250300240229200, -28.25053119339279900 ) ) ; +#11713 = EDGE_CURVE ( 'NONE', #37342, #14507, #12109, .T. ) ; +#11712 = ORIENTED_EDGE ( 'NONE', *, *, #15392, .T. ) ; +#11714 = CONICAL_SURFACE ( 'NONE', #1628, 10.00000000000009200, 0.7853981633974447300 ) ; +#11715 = VERTEX_POINT ( 'NONE', #39210 ) ; +#11716 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492439700, 50.20543520232830300, -28.70555803802996700 ) ) ; +#11717 = AXIS2_PLACEMENT_3D ( 'NONE', #28073, #34298, #65342 ) ; +#11718 = EDGE_LOOP ( 'NONE', ( #4125, #46746, #33772, #32154 ) ) ; +#11719 = ORIENTED_EDGE ( 'NONE', *, *, #45109, .F. ) ; +#11720 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11721 = VERTEX_POINT ( 'NONE', #8194 ) ; +#11722 = ORIENTED_EDGE ( 'NONE', *, *, #13185, .F. ) ; +#11723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11724 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 87.94142842854296300, -28.20555803802997700 ) ) ; +#11725 = CARTESIAN_POINT ( 'NONE', ( -17.04027359854958900, 39.22437813624629400, -28.30310527599300500 ) ) ; +#11726 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28705, #47376, #53663, #16415 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785988254300, 0.001246815221881860200 ), + .UNSPECIFIED. ) ; +#11727 = ADVANCED_FACE ( 'NONE', ( #76318 ), #10160, .T. ) ; +#11728 = CIRCLE ( 'NONE', #19259, 10.50000000000009600 ) ; +#11729 = AXIS2_PLACEMENT_3D ( 'NONE', #35534, #72787, #47982 ) ; +#11730 = ORIENTED_EDGE ( 'NONE', *, *, #17356, .F. ) ; +#11731 = ORIENTED_EDGE ( 'NONE', *, *, #74661, .F. ) ; +#11732 = ORIENTED_EDGE ( 'NONE', *, *, #74789, .T. ) ; +#11733 = VERTEX_POINT ( 'NONE', #70497 ) ; +#11734 = EDGE_LOOP ( 'NONE', ( #44644, #67216, #72522, #1968 ) ) ; +#11735 = FACE_OUTER_BOUND ( 'NONE', #66177, .T. ) ; +#11736 = ADVANCED_FACE ( 'NONE', ( #26721 ), #57836, .T. ) ; +#11737 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, -1.333333333333325000, -5.535685056952199400 ) ) ; +#11738 = ORIENTED_EDGE ( 'NONE', *, *, #35849, .F. ) ; +#11739 = AXIS2_PLACEMENT_3D ( 'NONE', #72426, #35178, #78679 ) ; +#11740 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 49.23827450271716800, -28.47230003642277300 ) ) ; +#11741 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 38.83333333333334300, -9.205558038030003900 ) ) ; +#11742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11744 = EDGE_CURVE ( 'NONE', #36273, #39293, #74402, .T. ) ; +#11745 = CIRCLE ( 'NONE', #80096, 10.00000000000009200 ) ; +#11747 = VERTEX_POINT ( 'NONE', #39759 ) ; +#11746 = ADVANCED_FACE ( 'NONE', ( #47112 ), #8165, .T. ) ; +#11748 = CARTESIAN_POINT ( 'NONE', ( 10.98574357684228400, 71.58004100757865700, -28.24987021275329000 ) ) ; +#11749 = CARTESIAN_POINT ( 'NONE', ( 17.31601142792135300, 41.12324289661779600, -28.43415153258098000 ) ) ; +#11750 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 4.000000000000003600, 6.794441961969995200 ) ) ; +#11751 = ORIENTED_EDGE ( 'NONE', *, *, #52718, .T. ) ; +#11752 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462088000, 80.20590598242345900, -28.39369363572397700 ) ) ; +#11753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11754 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11756 = ADVANCED_FACE ( 'NONE', ( #45141 ), #55868, .T. ) ; +#11757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11758 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11759 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 87.94142842854287800, -28.20555803803047800 ) ) ; +#11760 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11761 = EDGE_CURVE ( 'NONE', #33176, #73641, #72460, .T. ) ; +#11763 = EDGE_CURVE ( 'NONE', #33554, #74091, #32545, .T. ) ; +#11762 = CONICAL_SURFACE ( 'NONE', #30745, 10.50000000000009600, 0.7853981633974518300 ) ; +#11764 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#11765 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609179900, 34.41466791010185500, -28.53910738522647600 ) ) ; +#11766 = ORIENTED_EDGE ( 'NONE', *, *, #65877, .F. ) ; +#11767 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11768 = ORIENTED_EDGE ( 'NONE', *, *, #69173, .T. ) ; +#11769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51139, #7645, #63732, #26471 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780761754400E-007, 0.0002745453538439297500 ), + .UNSPECIFIED. ) ; +#11770 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#11771 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653750300, 81.39409401757623600, -28.39369363572358700 ) ) ; +#11772 = ORIENTED_EDGE ( 'NONE', *, *, #6054, .F. ) ; +#11773 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.87705528805138800, -28.20555803802996700 ) ) ; +#11774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11775 = DIRECTION ( 'NONE', ( 1.982541115402066600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11777 = AXIS2_PLACEMENT_3D ( 'NONE', #6619, #50103, #12905 ) ; +#11778 = EDGE_CURVE ( 'NONE', #26910, #14827, #24747, .T. ) ; +#11779 = CARTESIAN_POINT ( 'NONE', ( -10.77874659791490700, 39.16476742015635900, -28.30311934730017100 ) ) ; +#11780 = EDGE_CURVE ( 'NONE', #42850, #26714, #41283, .T. ) ; +#11781 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#11782 = EDGE_CURVE ( 'NONE', #54853, #69353, #30311, .T. ) ; +#11783 = CARTESIAN_POINT ( 'NONE', ( -10.63950292779718300, 30.93250300240228900, -28.25438406275898700 ) ) ; +#11784 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 89.63176086632793700, -28.70555803802997700 ) ) ; +#11785 = FACE_OUTER_BOUND ( 'NONE', #16393, .T. ) ; +#11786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11788 = ORIENTED_EDGE ( 'NONE', *, *, #22269, .T. ) ; +#11787 = EDGE_CURVE ( 'NONE', #70364, #30469, #15803, .T. ) ; +#11789 = ORIENTED_EDGE ( 'NONE', *, *, #79487, .T. ) ; +#11790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11791 = FACE_OUTER_BOUND ( 'NONE', #69798, .T. ) ; +#11792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11793 = EDGE_LOOP ( 'NONE', ( #16365, #23797, #28634 ) ) ; +#11795 = ORIENTED_EDGE ( 'NONE', *, *, #75262, .T. ) ; +#11794 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310471400, 49.60230989102910800, -28.61774594594331600 ) ) ; +#11796 = ORIENTED_EDGE ( 'NONE', *, *, #80640, .T. ) ; +#11797 = ORIENTED_EDGE ( 'NONE', *, *, #9482, .F. ) ; +#11798 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#11799 = AXIS2_PLACEMENT_3D ( 'NONE', #6714, #12995, #447 ) ; +#11800 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#11801 = AXIS2_PLACEMENT_3D ( 'NONE', #37151, #24673, #55659 ) ; +#11802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11803 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 75.79999999999982700, -28.20555803803014400 ) ) ; +#11804 = CONICAL_SURFACE ( 'NONE', #67169, 10.50000000000009800, 0.7853981633974500600 ) ; +#11805 = VERTEX_POINT ( 'NONE', #71599 ) ; +#11806 = ORIENTED_EDGE ( 'NONE', *, *, #44519, .T. ) ; +#11807 = ORIENTED_EDGE ( 'NONE', *, *, #79689, .T. ) ; +#11808 = CARTESIAN_POINT ( 'NONE', ( -1.880747610383201300E-013, 63.89610994602598700, -28.37519436813194000 ) ) ; +#11809 = ORIENTED_EDGE ( 'NONE', *, *, #19136, .T. ) ; +#11810 = ORIENTED_EDGE ( 'NONE', *, *, #58925, .F. ) ; +#11811 = ORIENTED_EDGE ( 'NONE', *, *, #72532, .F. ) ; +#11812 = ORIENTED_EDGE ( 'NONE', *, *, #21556, .F. ) ; +#11813 = CONICAL_SURFACE ( 'NONE', #52402, 10.50000000000009600, 0.7853981633974482800 ) ; +#11814 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 44.83333333333332100, 0.9380355014189731800 ) ) ; +#11815 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11816 = AXIS2_PLACEMENT_3D ( 'NONE', #3246, #46753, #9514 ) ; +#11817 = EDGE_CURVE ( 'NONE', #12957, #66490, #78306, .T. ) ; +#11818 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498000, 70.16054007504415300, -28.34042301926921700 ) ) ; +#11819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11820 = CARTESIAN_POINT ( 'NONE', ( -17.32934156052460800, 70.46865661974089800, -28.43089930266685500 ) ) ; +#11821 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65783, #22249, #34776, #78291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217704448447100E-007, 0.0008482615949370242300 ), + .UNSPECIFIED. ) ; +#11822 = ADVANCED_FACE ( 'NONE', ( #39316 ), #20850, .F. ) ; +#11823 = CIRCLE ( 'NONE', #63911, 9.500000000000097700 ) ; +#11824 = VERTEX_POINT ( 'NONE', #59349 ) ; +#11826 = EDGE_CURVE ( 'NONE', #29698, #10553, #1327, .T. ) ; +#11825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38100, #75401, #44330, #7109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0006862403197095605500 ), + .UNSPECIFIED. ) ; +#11827 = AXIS2_PLACEMENT_3D ( 'NONE', #69948, #32700, #76211 ) ; +#11828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43054, #24585, #43325, #6083 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003632803484388080300, 0.0005093674608222712300 ), + .UNSPECIFIED. ) ; +#11829 = ADVANCED_FACE ( 'NONE', ( #37349 ), #68542, .T. ) ; +#11830 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819243100, 69.94924284854681700, -28.20555803803005900 ) ) ; +#11831 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#11832 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 16.16666666666667900, 1.741883078712356500 ) ) ; +#11833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54200, #10710, #60485, #23213 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.150885539854636100E-016, 0.001179148174662837700 ), + .UNSPECIFIED. ) ; +#11834 = AXIS2_PLACEMENT_3D ( 'NONE', #39914, #52386, #15162 ) ; +#11835 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614692300, 38.99322649091134700, -28.30799595738869800 ) ) ; +#11836 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11837 = ADVANCED_FACE ( 'NONE', ( #43229 ), #35465, .T. ) ; +#11838 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528428000, 49.63131911501857700, -28.51286550264483200 ) ) ; +#11839 = ORIENTED_EDGE ( 'NONE', *, *, #80407, .T. ) ; +#11840 = ORIENTED_EDGE ( 'NONE', *, *, #63128, .F. ) ; +#11841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11843 = ORIENTED_EDGE ( 'NONE', *, *, #37603, .F. ) ; +#11844 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11845 = AXIS2_PLACEMENT_3D ( 'NONE', #3158, #52930, #15425 ) ; +#11846 = ADVANCED_FACE ( 'NONE', ( #70467 ), #2309, .F. ) ; +#11847 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999990700, 47.66666666666670000, 5.722645192245508400 ) ) ; +#11848 = FACE_OUTER_BOUND ( 'NONE', #27016, .T. ) ; +#11849 = ORIENTED_EDGE ( 'NONE', *, *, #69520, .T. ) ; +#11850 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 26.20389005397394300, -28.37519436813180100 ) ) ; +#11851 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183300, 49.63131911501876200, -28.51286550264510200 ) ) ; +#11853 = EDGE_CURVE ( 'NONE', #64569, #71340, #67672, .T. ) ; +#11852 = ORIENTED_EDGE ( 'NONE', *, *, #10107, .F. ) ; +#11854 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 50.66666666666667100, -5.535685056952199400 ) ) ; +#11855 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11856 = VERTEX_POINT ( 'NONE', #34872 ) ; +#11857 = CONICAL_SURFACE ( 'NONE', #45811, 10.00000000000009200, 0.7853981633974447300 ) ; +#11858 = ORIENTED_EDGE ( 'NONE', *, *, #59320, .F. ) ; +#11859 = ORIENTED_EDGE ( 'NONE', *, *, #50842, .T. ) ; +#11860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13363, #7061, #44296, #19603 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183125300, 0.005168056621191968400 ), + .UNSPECIFIED. ) ; +#11861 = ORIENTED_EDGE ( 'NONE', *, *, #66919, .F. ) ; +#11862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11863 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 30.96868088498122200, -28.51286550264512000 ) ) ; +#11864 = PLANE ( 'NONE', #11234 ) ; +#11865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11866 = ORIENTED_EDGE ( 'NONE', *, *, #40009, .F. ) ; +#11867 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11868 = VERTEX_POINT ( 'NONE', #16104 ) ; +#11869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11870 = LINE ( 'NONE', #39448, #9909 ) ; +#11871 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390573200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#11872 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56591, #50302, #68843, #19326 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01412728837592751800, 0.01489823379111373900 ), + .UNSPECIFIED. ) ; +#11873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11874 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567146100, 39.35339758437810100, -28.20555803802995200 ) ) ; +#11875 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000044100, 78.62623792124928500, -28.70555803803047500 ) ) ; +#11876 = EDGE_LOOP ( 'NONE', ( #39071, #23182, #68848, #25866, #5945 ) ) ; +#11877 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 75.92347538297963200, -28.70555803803014400 ) ) ; +#11878 = EDGE_CURVE ( 'NONE', #8942, #26414, #6248, .T. ) ; +#11879 = CONICAL_SURFACE ( 'NONE', #7671, 10.00000000000009600, 0.7853981633974482800 ) ; +#11880 = ORIENTED_EDGE ( 'NONE', *, *, #19277, .T. ) ; +#11881 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.65857157145701700, -28.20555803802997700 ) ) ; +#11882 = ORIENTED_EDGE ( 'NONE', *, *, #16649, .T. ) ; +#11883 = EDGE_CURVE ( 'NONE', #57367, #37515, #53924, .T. ) ; +#11884 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#11885 = ORIENTED_EDGE ( 'NONE', *, *, #23932, .T. ) ; +#11886 = ORIENTED_EDGE ( 'NONE', *, *, #51146, .F. ) ; +#11887 = FACE_OUTER_BOUND ( 'NONE', #57594, .T. ) ; +#11888 = ORIENTED_EDGE ( 'NONE', *, *, #18427, .F. ) ; +#11889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11890 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011400, 55.67652461702001400, -28.70555803803014400 ) ) ; +#11891 = CIRCLE ( 'NONE', #61291, 10.00000000000009400 ) ; +#11892 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#11893 = EDGE_CURVE ( 'NONE', #32213, #57259, #53188, .T. ) ; +#11894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11895 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11896 = EDGE_CURVE ( 'NONE', #39110, #15406, #4293, .T. ) ; +#11897 = AXIS2_PLACEMENT_3D ( 'NONE', #15871, #59399, #22132 ) ; +#11898 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274668200, 15.93535825203929900, -28.53896444442223100 ) ) ; +#11899 = FACE_OUTER_BOUND ( 'NONE', #42680, .T. ) ; +#11900 = ORIENTED_EDGE ( 'NONE', *, *, #26908, .F. ) ; +#11901 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 57.00000000000001400, 9.794441961969996100 ) ) ; +#11902 = ORIENTED_EDGE ( 'NONE', *, *, #3663, .F. ) ; +#11903 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#11904 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 22.16666666666667500, -6.205558038030004800 ) ) ; +#11905 = AXIS2_PLACEMENT_3D ( 'NONE', #53499, #16247, #59766 ) ; +#11906 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11907 = EDGE_CURVE ( 'NONE', #8615, #21270, #38700, .T. ) ; +#11908 = EDGE_CURVE ( 'NONE', #64569, #14341, #22803, .T. ) ; +#11909 = AXIS2_PLACEMENT_3D ( 'NONE', #39521, #2247, #45742 ) ; +#11910 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11911 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#11912 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 24.49999999999999600, 6.847000845227641200 ) ) ; +#11913 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655525700, 20.67701665379217200, -28.20555803802994500 ) ) ; +#11914 = ORIENTED_EDGE ( 'NONE', *, *, #72889, .T. ) ; +#11915 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910400, 76.76150692817282100, -28.68631150211663100 ) ) ; +#11916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11917 = VERTEX_POINT ( 'NONE', #22895 ) ; +#11918 = EDGE_CURVE ( 'NONE', #54435, #54333, #18882, .T. ) ; +#11919 = AXIS2_PLACEMENT_3D ( 'NONE', #44321, #7101, #50595 ) ; +#11920 = AXIS2_PLACEMENT_3D ( 'NONE', #42275, #5029, #48516 ) ; +#11921 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#11922 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#11923 = CARTESIAN_POINT ( 'NONE', ( 16.32232026313008800, 90.10230989102886700, -28.61774594593744000 ) ) ; +#11924 = ORIENTED_EDGE ( 'NONE', *, *, #35597, .T. ) ; +#11925 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542400, 19.60079448659599400, -28.70555803802994200 ) ) ; +#11926 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484958100, 89.28967419478928500, -28.59353418718927700 ) ) ; +#11927 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11928 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36085, #73344, #54821, #17597 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709657400, 0.0006599881756735483200 ), + .UNSPECIFIED. ) ; +#11929 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 67.60073525436787600, -28.70555803802999500 ) ) ; +#11930 = CIRCLE ( 'NONE', #57993, 10.50000000000009600 ) ; +#11931 = EDGE_LOOP ( 'NONE', ( #59228, #17341, #35303, #11213 ) ) ; +#11932 = CIRCLE ( 'NONE', #1876, 9.500000000000097700 ) ; +#11933 = VERTEX_POINT ( 'NONE', #47877 ) ; +#11934 = ADVANCED_FACE ( 'NONE', ( #51942 ), #48048, .T. ) ; +#11935 = CIRCLE ( 'NONE', #15595, 9.500000000000097700 ) ; +#11936 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650650200, 20.51912043132465200, -28.30223257055581200 ) ) ; +#11937 = EDGE_LOOP ( 'NONE', ( #7793, #27080, #75077, #17928 ) ) ; +#11938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11939 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#11940 = ORIENTED_EDGE ( 'NONE', *, *, #22503, .F. ) ; +#11941 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#11942 = ADVANCED_FACE ( 'NONE', ( #33484 ), #14989, .T. ) ; +#11943 = VERTEX_POINT ( 'NONE', #35931 ) ; +#11944 = VERTEX_POINT ( 'NONE', #79461 ) ; +#11945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21824, #65382, #40569, #3299 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399032774264800E-007, 0.0009968645831863541100 ), + .UNSPECIFIED. ) ; +#11946 = CONICAL_SURFACE ( 'NONE', #80659, 10.50000000000009600, 0.7853981633974518300 ) ; +#11947 = ADVANCED_FACE ( 'NONE', ( #79239 ), #4920, .T. ) ; +#11948 = CARTESIAN_POINT ( 'NONE', ( -17.38218670428394600, 31.20504786954603200, -28.41843566569990300 ) ) ; +#11949 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 80.34510448120796900, -28.37193179497697300 ) ) ; +#11950 = ORIENTED_EDGE ( 'NONE', *, *, #14467, .F. ) ; +#11951 = AXIS2_PLACEMENT_3D ( 'NONE', #78696, #72176, #59926 ) ; +#11952 = CONICAL_SURFACE ( 'NONE', #76445, 10.50000000000009600, 0.7853981633974500600 ) ; +#11953 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 28.00000000000001100, -1.205558038030005300 ) ) ; +#11954 = VERTEX_POINT ( 'NONE', #4648 ) ; +#11955 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651185800, 51.99560977511661300, -28.70555803802997700 ) ) ; +#11956 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041000, 77.94142842854287800, -28.20555803803047800 ) ) ; +#11957 = ORIENTED_EDGE ( 'NONE', *, *, #69104, .T. ) ; +#11958 = VERTEX_POINT ( 'NONE', #67217 ) ; +#11959 = VERTEX_POINT ( 'NONE', #29984 ) ; +#11960 = CONICAL_SURFACE ( 'NONE', #25177, 10.00000000000009600, 0.7853981633974447300 ) ; +#11961 = VERTEX_POINT ( 'NONE', #48403 ) ; +#11962 = CIRCLE ( 'NONE', #20050, 10.00000000000009200 ) ; +#11963 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 90.16349705304865800, -28.30782889147482400 ) ) ; +#11964 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#11965 = AXIS2_PLACEMENT_3D ( 'NONE', #73894, #80123, #30388 ) ; +#11966 = CARTESIAN_POINT ( 'NONE', ( 17.03295546792541900, 83.19758746877469900, -28.49829281932972700 ) ) ; +#11967 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263270500, 24.54999999999995500, -28.70555803802994200 ) ) ; +#11968 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58338, #14821, #52045, #64619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0007606633682806791400 ), + .UNSPECIFIED. ) ; +#11969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11970 = EDGE_CURVE ( 'NONE', #74066, #57210, #66586, .T. ) ; +#11971 = VERTEX_POINT ( 'NONE', #36197 ) ; +#11972 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#11973 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725658600, 77.93535825203925100, -28.53896444442201400 ) ) ; +#11974 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 17.97246552159106500, -28.38801640354855800 ) ) ; +#11975 = AXIS2_PLACEMENT_3D ( 'NONE', #74878, #37572, #329 ) ; +#11976 = CIRCLE ( 'NONE', #77364, 10.50000000000009800 ) ; +#11977 = VERTEX_POINT ( 'NONE', #23709 ) ; +#11978 = FACE_OUTER_BOUND ( 'NONE', #36963, .T. ) ; +#11979 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#11980 = CARTESIAN_POINT ( 'NONE', ( 3.976840323493589400, 20.51912043132477600, -28.30223257055572700 ) ) ; +#11981 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510346100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#11982 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112237100, 41.02667319908759700, -28.37233769390180200 ) ) ; +#11983 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804419600, 77.94142842854304800, -28.37229765499311200 ) ) ; +#11984 = EDGE_CURVE ( 'NONE', #49049, #43689, #24300, .T. ) ; +#11985 = EDGE_CURVE ( 'NONE', #55596, #61281, #49994, .T. ) ; +#11986 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#11987 = VERTEX_POINT ( 'NONE', #17713 ) ; +#11988 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, -3.499999999999996000, 2.454695999814385600 ) ) ; +#11989 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999947600, 38.63176086632791600, -28.70555803802995200 ) ) ; +#11990 = EDGE_CURVE ( 'NONE', #15610, #49730, #64653, .T. ) ; +#11991 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #38799, #1557, #57595 ), + ( #20340, #63876, #26619 ), + ( #70090, #32835, #76355 ), + ( #39072, #1806, #45310 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 7.829565058920556100, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9998509762273990500, 1.000000000000000000), + ( 1.000000000000000000, 0.9999503143911578900, 1.000000000000000000), + ( 1.000000000000000000, 1.000000001323388100, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11992 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 36.66666666666667900, 5.722645192245505700 ) ) ; +#11993 = EDGE_CURVE ( 'NONE', #45538, #71029, #9827, .T. ) ; +#11994 = CIRCLE ( 'NONE', #41769, 10.00000000000009200 ) ; +#11995 = ORIENTED_EDGE ( 'NONE', *, *, #31698, .T. ) ; +#11996 = AXIS2_PLACEMENT_3D ( 'NONE', #5644, #30427, #42890 ) ; +#11997 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281064400, 51.13768531620325300, -28.37082013777818900 ) ) ; +#11998 = FACE_OUTER_BOUND ( 'NONE', #38511, .T. ) ; +#11999 = ORIENTED_EDGE ( 'NONE', *, *, #56658, .T. ) ; +#12000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12001 = ORIENTED_EDGE ( 'NONE', *, *, #12135, .F. ) ; +#12002 = CIRCLE ( 'NONE', #11603, 9.500000000000097700 ) ; +#12003 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 1.833333333333343900, -9.205558038030003900 ) ) ; +#12004 = EDGE_LOOP ( 'NONE', ( #63795, #6867, #65960 ) ) ; +#12005 = EDGE_LOOP ( 'NONE', ( #79436, #57744, #60518 ) ) ; +#12006 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455540500, 80.07527064970054200, -28.39317435246170300 ) ) ; +#12007 = CARTESIAN_POINT ( 'NONE', ( 5.148153789003474800, 55.80000000000016800, -28.37148172714598700 ) ) ; +#12008 = AXIS2_PLACEMENT_3D ( 'NONE', #70908, #14893, #52116 ) ; +#12009 = FACE_OUTER_BOUND ( 'NONE', #76821, .T. ) ; +#12010 = EDGE_CURVE ( 'NONE', #19455, #39538, #16958, .T. ) ; +#12011 = PLANE ( 'NONE', #41655 ) ; +#12012 = EDGE_CURVE ( 'NONE', #2167, #78459, #62683, .T. ) ; +#12013 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000016400, 40.90050506338822300, -28.70555803802997700 ) ) ; +#12014 = EDGE_CURVE ( 'NONE', #54184, #35366, #31552, .T. ) ; +#12015 = ADVANCED_FACE ( 'NONE', ( #374 ), #11102, .T. ) ; +#12016 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12018 = FACE_OUTER_BOUND ( 'NONE', #34977, .T. ) ; +#12017 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 70.16054007504466500, -28.34042301926881200 ) ) ; +#12019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25141, #43600, #37613, #361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957487920700, 0.004414112765716289400 ), + .UNSPECIFIED. ) ; +#12020 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#12021 = ORIENTED_EDGE ( 'NONE', *, *, #57845, .T. ) ; +#12022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12023 = VECTOR ( 'NONE', #37104, 1000.000000000000000 ) ; +#12024 = AXIS2_PLACEMENT_3D ( 'NONE', #3172, #46675, #9432 ) ; +#12025 = EDGE_LOOP ( 'NONE', ( #79533, #38832, #60500, #48581 ) ) ; +#12026 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.075059700787450300E-013, 0.0000000000000000000 ) ) ; +#12027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12028 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 35.05000000000000400, -28.20555803802995200 ) ) ; +#12029 = ORIENTED_EDGE ( 'NONE', *, *, #18655, .F. ) ; +#12030 = ORIENTED_EDGE ( 'NONE', *, *, #80257, .T. ) ; +#12031 = CARTESIAN_POINT ( 'NONE', ( -3.128687715019856900, 7.471333297324206600, -28.40074127503910600 ) ) ; +#12032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12033 = ORIENTED_EDGE ( 'NONE', *, *, #37234, .T. ) ; +#12034 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 61.25732391202397800, -28.20555803802997700 ) ) ; +#12035 = EDGE_CURVE ( 'NONE', #72055, #49333, #76121, .T. ) ; +#12036 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 47.89962244433174000, -28.53664883431609000 ) ) ; +#12037 = ADVANCED_FACE ( 'NONE', ( #60747 ), #58771, .F. ) ; +#12038 = CONICAL_SURFACE ( 'NONE', #24692, 10.00000000000009200, 0.7853981633974447300 ) ; +#12039 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#12040 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12041 = AXIS2_PLACEMENT_3D ( 'NONE', #55218, #17983, #61521 ) ; +#12042 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660893900, 51.46283204837311600, -28.48697406221719300 ) ) ; +#12043 = AXIS2_PLACEMENT_3D ( 'NONE', #1099, #75900, #63148 ) ; +#12044 = ORIENTED_EDGE ( 'NONE', *, *, #7414, .T. ) ; +#12045 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30560, #30818, #49521, #12321 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611716354028900E-007, 0.0002592600401777226200 ), + .UNSPECIFIED. ) ; +#12046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12047 = ORIENTED_EDGE ( 'NONE', *, *, #34620, .T. ) ; +#12048 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12049 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12050 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#12051 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534556000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#12052 = CARTESIAN_POINT ( 'NONE', ( 9.997971278275731100, 41.31091476818471600, -28.25432823872345300 ) ) ; +#12053 = EDGE_LOOP ( 'NONE', ( #57527, #52314, #57557, #37830 ) ) ; +#12054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12055 = FACE_OUTER_BOUND ( 'NONE', #73925, .T. ) ; +#12056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65187, #9090, #21912, #65467 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882720949200E-007, 0.0004435496461721904100 ), + .UNSPECIFIED. ) ; +#12057 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#12058 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807016500, 74.79999999999962800, -28.70555803803014400 ) ) ; +#12059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12060 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 31.17701665379186000, -28.20555803802995200 ) ) ; +#12061 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12063 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390808600, 46.18533208989815400, -28.53910738522650400 ) ) ; +#12064 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12065 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51075, #44813, #57118, #57377 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646359600, 0.0009605145132142263100 ), + .UNSPECIFIED. ) ; +#12066 = ADVANCED_FACE ( 'NONE', ( #46095 ), #25704, .T. ) ; +#12067 = AXIS2_PLACEMENT_3D ( 'NONE', #7153, #44924, #69718 ) ; +#12068 = CONICAL_SURFACE ( 'NONE', #28452, 10.00000000000009600, 0.7853981633974447300 ) ; +#12069 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#12070 = ORIENTED_EDGE ( 'NONE', *, *, #65312, .F. ) ; +#12071 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 42.66666666666667900, -5.205558038030003100 ) ) ; +#12072 = AXIS2_PLACEMENT_3D ( 'NONE', #54434, #17197, #60722 ) ; +#12073 = ORIENTED_EDGE ( 'NONE', *, *, #52854, .T. ) ; +#12075 = ORIENTED_EDGE ( 'NONE', *, *, #56071, .F. ) ; +#12074 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819428200, 61.65075715145307100, -28.20555803803005900 ) ) ; +#12076 = EDGE_CURVE ( 'NONE', #56481, #23233, #44123, .T. ) ; +#12077 = CIRCLE ( 'NONE', #79807, 10.00000000000009200 ) ; +#12078 = ORIENTED_EDGE ( 'NONE', *, *, #59291, .T. ) ; +#12079 = FACE_OUTER_BOUND ( 'NONE', #44071, .T. ) ; +#12080 = ORIENTED_EDGE ( 'NONE', *, *, #71096, .T. ) ; +#12081 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.29722425778843600, -28.32715733700493400 ) ) ; +#12082 = CIRCLE ( 'NONE', #46938, 10.00000000000009400 ) ; +#12083 = CYLINDRICAL_SURFACE ( 'NONE', #15357, 10.00000000000000200 ) ; +#12084 = ORIENTED_EDGE ( 'NONE', *, *, #40835, .T. ) ; +#12085 = ORIENTED_EDGE ( 'NONE', *, *, #54871, .T. ) ; +#12086 = ORIENTED_EDGE ( 'NONE', *, *, #65972, .F. ) ; +#12087 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#12088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12089 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73223, #29727, #42166, #4933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964986100, 0.0005839769583133816100 ), + .UNSPECIFIED. ) ; +#12090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12091 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12092 = CARTESIAN_POINT ( 'NONE', ( 17.40875264640682500, 39.42052012210350400, -28.41157636893868200 ) ) ; +#12093 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 14.00000000000001800, -1.205558038030002800 ) ) ; +#12094 = CONICAL_SURFACE ( 'NONE', #62312, 10.00000000000009400, 0.7853981633974447300 ) ; +#12095 = ORIENTED_EDGE ( 'NONE', *, *, #50904, .F. ) ; +#12096 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310450800, 18.10230989102908700, -28.61774594594334400 ) ) ; +#12097 = FACE_OUTER_BOUND ( 'NONE', #23114, .T. ) ; +#12098 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124974200, 55.13282980700520100, -28.53914313452737200 ) ) ; +#12099 = EDGE_CURVE ( 'NONE', #35598, #8272, #13062, .T. ) ; +#12100 = ORIENTED_EDGE ( 'NONE', *, *, #6483, .F. ) ; +#12101 = ORIENTED_EDGE ( 'NONE', *, *, #8734, .F. ) ; +#12103 = EDGE_CURVE ( 'NONE', #74017, #35663, #61703, .T. ) ; +#12102 = EDGE_LOOP ( 'NONE', ( #52, #40231, #35164 ) ) ; +#12104 = EDGE_LOOP ( 'NONE', ( #1945, #79379, #53060, #607 ) ) ; +#12105 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12106 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495027400, 41.90771342879323000, -28.53891855579990300 ) ) ; +#12107 = CARTESIAN_POINT ( 'NONE', ( 3.985751803131505800, 80.01994747561617800, -28.24986299608857700 ) ) ; +#12108 = EDGE_LOOP ( 'NONE', ( #46142, #55640, #28406, #80605 ) ) ; +#12109 = CIRCLE ( 'NONE', #41832, 10.00000000000009400 ) ; +#12110 = PLANE ( 'NONE', #11004 ) ; +#12111 = EDGE_CURVE ( 'NONE', #73484, #3997, #47177, .T. ) ; +#12112 = ADVANCED_FACE ( 'NONE', ( #42196 ), #40262, .T. ) ; +#12113 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192848700, 76.79999999999998300, -28.70555803802997700 ) ) ; +#12114 = EDGE_CURVE ( 'NONE', #60447, #63715, #56827, .T. ) ; +#12115 = ORIENTED_EDGE ( 'NONE', *, *, #54746, .T. ) ; +#12116 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551024700, 45.50000000000000000, -7.061964498581026800 ) ) ; +#12117 = ORIENTED_EDGE ( 'NONE', *, *, #49584, .T. ) ; +#12118 = AXIS2_PLACEMENT_3D ( 'NONE', #30087, #42537, #5290 ) ; +#12119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12120 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 48.50000000000000000, 2.454695999814385600 ) ) ; +#12121 = EDGE_CURVE ( 'NONE', #80233, #998, #32744, .T. ) ; +#12122 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459416700, 72.51973550835650400, -28.70555803803014100 ) ) ; +#12123 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328924200, 31.23798719401659000, -28.29447340919114900 ) ) ; +#12124 = ORIENTED_EDGE ( 'NONE', *, *, #63107, .F. ) ; +#12125 = CIRCLE ( 'NONE', #64367, 9.500000000000097700 ) ; +#12126 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12127 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544465300, 61.87833896172675500, -28.53892303408252900 ) ) ; +#12128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12129 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#12130 = ADVANCED_FACE ( 'NONE', ( #9095 ), #71411, .T. ) ; +#12131 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 31.68315603019282300, -28.70555803802999200 ) ) ; +#12132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67484, #23995, #36460, #80007 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405667917298400E-007, 0.0007670610367940975900 ), + .UNSPECIFIED. ) ; +#12133 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#12134 = AXIS2_PLACEMENT_3D ( 'NONE', #76096, #38809, #1563 ) ; +#12135 = EDGE_CURVE ( 'NONE', #47492, #76771, #18304, .T. ) ; +#12136 = EDGE_CURVE ( 'NONE', #39132, #7748, #3825, .T. ) ; +#12137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12138 = EDGE_CURVE ( 'NONE', #53113, #14698, #70135, .T. ) ; +#12139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12140 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462477000, 71.39409401757623600, -28.39369363572359700 ) ) ; +#12141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12143 = AXIS2_PLACEMENT_3D ( 'NONE', #60233, #41970, #29511 ) ; +#12144 = CONICAL_SURFACE ( 'NONE', #19429, 10.50000000000009900, 0.7853981633974518300 ) ; +#12145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12146 = ADVANCED_FACE ( 'NONE', ( #73385 ), #38291, .T. ) ; +#12147 = ADVANCED_FACE ( 'NONE', ( #77270 ), #5239, .F. ) ; +#12148 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3939, #41213, #10213, #53720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782329400, 0.0004366687057299137200 ), + .UNSPECIFIED. ) ; +#12149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12151 = CARTESIAN_POINT ( 'NONE', ( -9.769169305343030600, 60.65007990305426200, -28.43638873268705000 ) ) ; +#12152 = ORIENTED_EDGE ( 'NONE', *, *, #31780, .F. ) ; +#12153 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#12154 = AXIS2_PLACEMENT_3D ( 'NONE', #32281, #63314, #1256 ) ; +#12155 = AXIS2_PLACEMENT_3D ( 'NONE', #26989, #70470, #33218 ) ; +#12156 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819371400, 79.94924284854695900, -28.20555803802997700 ) ) ; +#12157 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#12158 = ORIENTED_EDGE ( 'NONE', *, *, #36856, .F. ) ; +#12159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12160 = ADVANCED_FACE ( 'NONE', ( #23753 ), #52898, .T. ) ; +#12161 = CIRCLE ( 'NONE', #63619, 10.50000000000022600 ) ; +#12162 = FACE_OUTER_BOUND ( 'NONE', #56483, .T. ) ; +#12163 = VERTEX_POINT ( 'NONE', #51070 ) ; +#12164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12165 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 54.83333333333334300, -12.20555803803000600 ) ) ; +#12166 = CIRCLE ( 'NONE', #22436, 10.00000000000009200 ) ; +#12167 = LINE ( 'NONE', #18124, #61814 ) ; +#12168 = ORIENTED_EDGE ( 'NONE', *, *, #34395, .T. ) ; +#12169 = ORIENTED_EDGE ( 'NONE', *, *, #65299, .T. ) ; +#12170 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 20.00000000000001100, 3.794441961969998300 ) ) ; +#12171 = AXIS2_PLACEMENT_3D ( 'NONE', #20912, #64452, #58157 ) ; +#12172 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999799300, 52.97376207875046800, -28.70555803803030800 ) ) ; +#12173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31429, #68679, #37638, #392 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866776315700E-007, 0.001076778502991267800 ), + .UNSPECIFIED. ) ; +#12174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12175 = VECTOR ( 'NONE', #45983, 1000.000000000000000 ) ; +#12176 = VERTEX_POINT ( 'NONE', #20126 ) ; +#12177 = CONICAL_SURFACE ( 'NONE', #73738, 10.50000000000009600, 0.7853981633974500600 ) ; +#12178 = VERTEX_POINT ( 'NONE', #63654 ) ; +#12179 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12180 = EDGE_CURVE ( 'NONE', #57630, #26420, #55669, .T. ) ; +#12181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12182 = VERTEX_POINT ( 'NONE', #38843 ) ; +#12183 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 22.33333333333334600, -10.73183747965883100 ) ) ; +#12184 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 37.62623792124939100, -28.70555803802995200 ) ) ; +#12185 = AXIS2_PLACEMENT_3D ( 'NONE', #60383, #2941, #72877 ) ; +#12186 = ORIENTED_EDGE ( 'NONE', *, *, #10210, .T. ) ; +#12187 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148348100, 13.09761904761937100, -28.70555803802992800 ) ) ; +#12188 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498700, 80.16054007504416700, -28.34042301926922400 ) ) ; +#12189 = ORIENTED_EDGE ( 'NONE', *, *, #67885, .F. ) ; +#12190 = CIRCLE ( 'NONE', #58995, 10.00000000000009200 ) ; +#12191 = ORIENTED_EDGE ( 'NONE', *, *, #6561, .T. ) ; +#12192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12193 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000101300, 80.79999999999981200, -28.70555803802997700 ) ) ; +#12194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12195 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61646, #67879, #5874, #49338 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185118200, 0.001517199873936353700 ), + .UNSPECIFIED. ) ; +#12196 = CARTESIAN_POINT ( 'NONE', ( 11.72076650305811400, 80.09951448976249800, -28.63282631410047700 ) ) ; +#12197 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510923400, 20.12856921007283300, -28.37063977681167500 ) ) ; +#12198 = ORIENTED_EDGE ( 'NONE', *, *, #32598, .T. ) ; +#12199 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12200 = ORIENTED_EDGE ( 'NONE', *, *, #23312, .F. ) ; +#12201 = AXIS2_PLACEMENT_3D ( 'NONE', #75380, #38086, #836 ) ; +#12202 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900982500, 39.06267502090536700, -28.41043597897459700 ) ) ; +#12203 = ORIENTED_EDGE ( 'NONE', *, *, #6276, .F. ) ; +#12204 = CONICAL_SURFACE ( 'NONE', #70500, 10.50000000000009800, 0.7853981633974518300 ) ; +#12205 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.16749699759768800, -28.20555803802997700 ) ) ; +#12206 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12207 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#12208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12210 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465429700, 39.99920551340398600, -28.70555803802995200 ) ) ; +#12211 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12212 = ADVANCED_FACE ( 'NONE', ( #54864 ), #19840, .F. ) ; +#12213 = CARTESIAN_POINT ( 'NONE', ( 14.89966555183930000, 70.79999999999968500, -28.20555803803019800 ) ) ; +#12214 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474191200, 31.36172549728279800, -28.47230003642276600 ) ) ; +#12215 = EDGE_CURVE ( 'NONE', #29839, #60567, #41224, .T. ) ; +#12216 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 25.83333333333333600, 0.9380355014189731800 ) ) ; +#12217 = CIRCLE ( 'NONE', #15743, 10.50000000000009600 ) ; +#12218 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844502500, 55.80000000000000400, -28.20555803802997700 ) ) ; +#12219 = PLANE ( 'NONE', #20121 ) ; +#12220 = EDGE_CURVE ( 'NONE', #49030, #71936, #26783, .T. ) ; +#12221 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48566, #5081, #17614, #61143 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287015068700E-007, 0.0007303759720927572100 ), + .UNSPECIFIED. ) ; +#12222 = ORIENTED_EDGE ( 'NONE', *, *, #75365, .T. ) ; +#12223 = ORIENTED_EDGE ( 'NONE', *, *, #78141, .F. ) ; +#12224 = FACE_OUTER_BOUND ( 'NONE', #13728, .T. ) ; +#12225 = DIRECTION ( 'NONE', ( -1.000000000000000000, 9.251858538542914800E-014, 0.0000000000000000000 ) ) ; +#12226 = ADVANCED_FACE ( 'NONE', ( #69452 ), #67518, .T. ) ; +#12227 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12228 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#12229 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823694600, 10.90456253568403300, -28.61277292027076800 ) ) ; +#12230 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306342100, 20.59789380924876000, -28.25343951603341700 ) ) ; +#12231 = EDGE_LOOP ( 'NONE', ( #9158, #13992, #35972, #72001 ) ) ; +#12232 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091604000, 11.57425125164780200, -28.70555803803001300 ) ) ; +#12233 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12234 = CONICAL_SURFACE ( 'NONE', #34898, 10.50000000000009600, 0.7853981633974500600 ) ; +#12235 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042503900, 32.09027028261000700, -28.70555803802998800 ) ) ; +#12236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12237 = CONICAL_SURFACE ( 'NONE', #73650, 10.00000000000009400, 0.7853981633974447300 ) ; +#12238 = EDGE_CURVE ( 'NONE', #65437, #66318, #12331, .T. ) ; +#12239 = ORIENTED_EDGE ( 'NONE', *, *, #63368, .T. ) ; +#12240 = CARTESIAN_POINT ( 'NONE', ( 10.12141251449976100, 59.83662311806183000, -28.37223523914888500 ) ) ; +#12241 = EDGE_CURVE ( 'NONE', #79251, #54919, #3261, .T. ) ; +#12242 = ADVANCED_FACE ( 'NONE', ( #7157 ), #17885, .T. ) ; +#12243 = FACE_OUTER_BOUND ( 'NONE', #26159, .T. ) ; +#12244 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#12246 = ORIENTED_EDGE ( 'NONE', *, *, #39159, .T. ) ; +#12245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12247 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12248 = ORIENTED_EDGE ( 'NONE', *, *, #61113, .T. ) ; +#12249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12250 = AXIS2_PLACEMENT_3D ( 'NONE', #60910, #23634, #67146 ) ; +#12251 = EDGE_CURVE ( 'NONE', #9694, #114, #78655, .T. ) ; +#12252 = EDGE_CURVE ( 'NONE', #29676, #77798, #64197, .T. ) ; +#12253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12254 = EDGE_CURVE ( 'NONE', #15529, #73484, #75324, .T. ) ; +#12255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12256 = CONICAL_SURFACE ( 'NONE', #75407, 10.00000000000009200, 0.7853981633974447300 ) ; +#12257 = ADVANCED_FACE ( 'NONE', ( #34435 ), #48981, .F. ) ; +#12258 = CONICAL_SURFACE ( 'NONE', #79952, 10.50000000000009800, 0.7853981633974518300 ) ; +#12259 = VERTEX_POINT ( 'NONE', #77209 ) ; +#12260 = AXIS2_PLACEMENT_3D ( 'NONE', #51454, #57748, #69977 ) ; +#12261 = ORIENTED_EDGE ( 'NONE', *, *, #37120, .T. ) ; +#12262 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12263 = ORIENTED_EDGE ( 'NONE', *, *, #13080, .T. ) ; +#12264 = VERTEX_POINT ( 'NONE', #46169 ) ; +#12265 = VERTEX_POINT ( 'NONE', #8903 ) ; +#12266 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#12267 = ORIENTED_EDGE ( 'NONE', *, *, #51024, .F. ) ; +#12268 = ADVANCED_FACE ( 'NONE', ( #50926 ), #15923, .F. ) ; +#12269 = CONICAL_SURFACE ( 'NONE', #72940, 10.00000000000009200, 0.7853981633974447300 ) ; +#12270 = AXIS2_PLACEMENT_3D ( 'NONE', #10401, #60184, #22904 ) ; +#12271 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 69.50000000000002800, -4.865812075874393000 ) ) ; +#12272 = AXIS2_PLACEMENT_3D ( 'NONE', #64992, #71204, #21459 ) ; +#12273 = ORIENTED_EDGE ( 'NONE', *, *, #52103, .F. ) ; +#12274 = AXIS2_PLACEMENT_3D ( 'NONE', #28077, #59038, #65347 ) ; +#12275 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100900, 91.72502579738991800, -28.45034744217089400 ) ) ; +#12276 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70041, #76295, #39018, #1762 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349255854800E-007, 0.0007670609591623614800 ), + .UNSPECIFIED. ) ; +#12277 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#12278 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 34.50000000000000000, -7.061964498581022400 ) ) ; +#12279 = ORIENTED_EDGE ( 'NONE', *, *, #22961, .F. ) ; +#12280 = CIRCLE ( 'NONE', #2338, 9.500000000000101300 ) ; +#12282 = EDGE_LOOP ( 'NONE', ( #14036, #23467, #37963 ) ) ; +#12281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12283 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 17.97246552159106500, -28.38801640354855800 ) ) ; +#12284 = EDGE_LOOP ( 'NONE', ( #61963, #40258, #42992, #64157, #4635 ) ) ; +#12285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12286 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#12287 = CONICAL_SURFACE ( 'NONE', #58492, 10.50000000000009600, 0.7853981633974518300 ) ; +#12288 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, -0.3333333333333243800, 5.722645192245505700 ) ) ; +#12289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12291 = AXIS2_PLACEMENT_3D ( 'NONE', #44420, #13764, #63532 ) ; +#12292 = EDGE_CURVE ( 'NONE', #17139, #58440, #49659, .T. ) ; +#12293 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580927400, 37.86736912940425300, -28.67620115463453300 ) ) ; +#12294 = ORIENTED_EDGE ( 'NONE', *, *, #45948, .F. ) ; +#12295 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12297 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 80.69966441803890700, -28.70555803802997700 ) ) ; +#12298 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12299 = CARTESIAN_POINT ( 'NONE', ( -10.95972934556081700, 28.72438272935921300, -28.30310183417006800 ) ) ; +#12300 = CONICAL_SURFACE ( 'NONE', #76130, 10.00000000000009400, 0.7853981633974447300 ) ; +#12301 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 90.16749699759755300, -28.20555803803030800 ) ) ; +#12302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12303 = EDGE_CURVE ( 'NONE', #8011, #39176, #35269, .T. ) ; +#12304 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719597500, 57.94142842854297700, -28.37229765499279600 ) ) ; +#12305 = CONICAL_SURFACE ( 'NONE', #13936, 10.50000000000009600, 0.7853981633974500600 ) ; +#12306 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12309 = AXIS2_PLACEMENT_3D ( 'NONE', #19935, #63458, #26202 ) ; +#12310 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#12311 = ORIENTED_EDGE ( 'NONE', *, *, #56432, .T. ) ; +#12312 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 60.90033558196107300, -28.70555803802997700 ) ) ; +#12313 = VERTEX_POINT ( 'NONE', #15475 ) ; +#12314 = CONICAL_SURFACE ( 'NONE', #26990, 10.50000000000009600, 0.7853981633974500600 ) ; +#12315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12317 = ORIENTED_EDGE ( 'NONE', *, *, #37563, .F. ) ; +#12318 = CARTESIAN_POINT ( 'NONE', ( -3.125963764562762000, 9.632690823624649600, -28.36487527072573300 ) ) ; +#12319 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12320 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725656000, 36.93535825203924400, -28.53896444442198500 ) ) ; +#12321 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825480200, 60.16054007504464400, -28.34042301926889700 ) ) ; +#12322 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263262500, 45.54999999999997600, -28.70555803802996700 ) ) ; +#12323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12324 = FACE_OUTER_BOUND ( 'NONE', #72717, .T. ) ; +#12325 = AXIS2_PLACEMENT_3D ( 'NONE', #4153, #72449, #16406 ) ; +#12326 = FACE_OUTER_BOUND ( 'NONE', #16459, .T. ) ; +#12327 = ORIENTED_EDGE ( 'NONE', *, *, #41357, .F. ) ; +#12328 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12329 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651226400, 81.99560977511660600, -28.70555803803014400 ) ) ; +#12330 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12331 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20652, #14392, #51605, #26921 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524635537500E-007, 0.0007303749718165242800 ), + .UNSPECIFIED. ) ; +#12332 = VERTEX_POINT ( 'NONE', #15192 ) ; +#12333 = EDGE_LOOP ( 'NONE', ( #44672, #28205, #2787 ) ) ; +#12334 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349246200, 18.70543520232827800, -28.70555803802992800 ) ) ; +#12335 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#12336 = AXIS2_PLACEMENT_3D ( 'NONE', #2771, #46272, #9028 ) ; +#12337 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#12338 = PLANE ( 'NONE', #3596 ) ; +#12339 = CIRCLE ( 'NONE', #55371, 10.00000000000009400 ) ; +#12340 = ORIENTED_EDGE ( 'NONE', *, *, #19852, .T. ) ; +#12341 = EDGE_CURVE ( 'NONE', #14994, #20135, #20790, .T. ) ; +#12342 = ORIENTED_EDGE ( 'NONE', *, *, #54269, .F. ) ; +#12343 = ADVANCED_FACE ( 'NONE', ( #27656 ), #63643, .F. ) ; +#12344 = ORIENTED_EDGE ( 'NONE', *, *, #57083, .T. ) ; +#12345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12346 = VERTEX_POINT ( 'NONE', #46707 ) ; +#12347 = ADVANCED_FACE ( 'NONE', ( #21795 ), #30553, .T. ) ; +#12348 = FACE_OUTER_BOUND ( 'NONE', #68736, .T. ) ; +#12349 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 40.50000000000002100, 4.650848422521012700 ) ) ; +#12350 = ORIENTED_EDGE ( 'NONE', *, *, #644, .F. ) ; +#12351 = ORIENTED_EDGE ( 'NONE', *, *, #27436, .T. ) ; +#12352 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736723300, 45.54999999999997600, -28.70555803802996700 ) ) ; +#12353 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985163900, 13.09761904761934700, -28.70555803802992800 ) ) ; +#12354 = ADVANCED_FACE ( 'NONE', ( #1317 ), #29401, .T. ) ; +#12355 = CIRCLE ( 'NONE', #66953, 10.50000000000009600 ) ; +#12356 = ORIENTED_EDGE ( 'NONE', *, *, #8184, .T. ) ; +#12357 = EDGE_CURVE ( 'NONE', #65351, #54435, #65594, .T. ) ; +#12358 = ORIENTED_EDGE ( 'NONE', *, *, #77994, .T. ) ; +#12359 = FACE_OUTER_BOUND ( 'NONE', #39582, .T. ) ; +#12360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12361 = CONICAL_SURFACE ( 'NONE', #33991, 10.00000000000009200, 0.7853981633974447300 ) ; +#12362 = AXIS2_PLACEMENT_3D ( 'NONE', #59187, #46651, #65481 ) ; +#12363 = EDGE_CURVE ( 'NONE', #36928, #34605, #47037, .T. ) ; +#12364 = EDGE_CURVE ( 'NONE', #4680, #76954, #6325, .T. ) ; +#12365 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543028500, 90.23522516708057100, -28.27573853395030700 ) ) ; +#12367 = VERTEX_POINT ( 'NONE', #12700 ) ; +#12366 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#12368 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510358000, 49.65930907398620800, -28.35186440610858900 ) ) ; +#12369 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002100, 83.43454006867176500, -28.70555803802999500 ) ) ; +#12370 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285729500, 12.17681279774500200, -28.70555803802994200 ) ) ; +#12371 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 11.83333333333334600, -4.152999154772353500 ) ) ; +#12372 = EDGE_CURVE ( 'NONE', #18178, #21010, #13983, .T. ) ; +#12373 = AXIS2_PLACEMENT_3D ( 'NONE', #70983, #33727, #77241 ) ; +#12374 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567173200, 9.746602415621898900, -28.20555803802992800 ) ) ; +#12375 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12376 = FACE_OUTER_BOUND ( 'NONE', #38631, .T. ) ; +#12377 = ORIENTED_EDGE ( 'NONE', *, *, #29598, .T. ) ; +#12378 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60110, #16586, #29135, #72620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925595429800E-007, 0.0004084731003434318200 ), + .UNSPECIFIED. ) ; +#12379 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#12380 = FACE_OUTER_BOUND ( 'NONE', #57828, .T. ) ; +#12381 = ORIENTED_EDGE ( 'NONE', *, *, #36990, .T. ) ; +#12382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12383 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660893900, 51.46283204837311600, -28.48697406221719300 ) ) ; +#12384 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26015, #38198, #32246, #75744 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629357884527600E-007, 0.0007670609591625401600 ), + .UNSPECIFIED. ) ; +#12385 = ORIENTED_EDGE ( 'NONE', *, *, #9071, .F. ) ; +#12386 = CIRCLE ( 'NONE', #31633, 10.00000000000009600 ) ; +#12387 = AXIS2_PLACEMENT_3D ( 'NONE', #78050, #40771, #3500 ) ; +#12388 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#12389 = AXIS2_PLACEMENT_3D ( 'NONE', #584, #56619, #13147 ) ; +#12390 = ORIENTED_EDGE ( 'NONE', *, *, #61955, .T. ) ; +#12391 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12392 = EDGE_CURVE ( 'NONE', #67155, #57833, #72659, .T. ) ; +#12393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12394 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36055, #5032, #30102, #73586 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881204147840000E-007, 0.0008724366121404057300 ), + .UNSPECIFIED. ) ; +#12396 = AXIS2_PLACEMENT_3D ( 'NONE', #33955, #58705, #77472 ) ; +#12395 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 82.31032580521097900, -28.59353418718932400 ) ) ; +#12397 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12398 = CIRCLE ( 'NONE', #69315, 10.50000000000009600 ) ; +#12399 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 46.33333333333334300, -3.705558038030004400 ) ) ; +#12400 = VERTEX_POINT ( 'NONE', #6675 ) ; +#12401 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 74.83849307182666200, -28.68631150211663400 ) ) ; +#12402 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 42.97376207875060300, -28.70555803802997700 ) ) ; +#12403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12404 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707767300, 10.16410593583299400, -28.68054222049974200 ) ) ; +#12405 = EDGE_CURVE ( 'NONE', #368, #31899, #58167, .T. ) ; +#12406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12407 = ORIENTED_EDGE ( 'NONE', *, *, #35029, .T. ) ; +#12408 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 48.91684396980715400, -28.70555803802999200 ) ) ; +#12409 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#12410 = AXIS2_PLACEMENT_3D ( 'NONE', #67896, #5613, #24384 ) ; +#12411 = AXIS2_PLACEMENT_3D ( 'NONE', #70143, #32881, #76403 ) ; +#12412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39690, #76967, #58474, #21227 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067964800 ), + .UNSPECIFIED. ) ; +#12413 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019278300, 84.79999999999959900, -28.70555803803047500 ) ) ; +#12414 = FACE_OUTER_BOUND ( 'NONE', #8943, .T. ) ; +#12415 = FACE_OUTER_BOUND ( 'NONE', #52251, .T. ) ; +#12416 = CARTESIAN_POINT ( 'NONE', ( 2.277608394786526900, 50.54999999999998300, -28.70555803802997000 ) ) ; +#12417 = ORIENTED_EDGE ( 'NONE', *, *, #40119, .F. ) ; +#12418 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027361800, 72.22511094383828800, -28.55192314908412900 ) ) ; +#12419 = EDGE_LOOP ( 'NONE', ( #11562, #35213, #74296 ) ) ; +#12420 = ORIENTED_EDGE ( 'NONE', *, *, #821, .F. ) ; +#12421 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528127800, 9.968680884981225200, -28.51286550264509100 ) ) ; +#12422 = VERTEX_POINT ( 'NONE', #31195 ) ; +#12423 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 70.34267608797600200, -28.20555803802997700 ) ) ; +#12424 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 38.92298334620756600, -28.20555803802995200 ) ) ; +#12425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12426 = ORIENTED_EDGE ( 'NONE', *, *, #46510, .F. ) ; +#12427 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997500, 91.25227248018305200, -28.70555803803016200 ) ) ; +#12428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44619, #38388, #75672, #7399 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067853200 ), + .UNSPECIFIED. ) ; +#12429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12430 = ADVANCED_FACE ( 'NONE', ( #32462 ), #12038, .T. ) ; +#12431 = CONICAL_SURFACE ( 'NONE', #71603, 10.00000000000009200, 0.7853981633974447300 ) ; +#12432 = AXIS2_PLACEMENT_3D ( 'NONE', #13296, #63057, #1013 ) ; +#12433 = ORIENTED_EDGE ( 'NONE', *, *, #41295, .F. ) ; +#12434 = ORIENTED_EDGE ( 'NONE', *, *, #35345, .F. ) ; +#12435 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.25489551879202600, -28.37193179497697000 ) ) ; +#12436 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 52.66666666666668600, 8.320721403598824400 ) ) ; +#12437 = ORIENTED_EDGE ( 'NONE', *, *, #63128, .T. ) ; +#12438 = CIRCLE ( 'NONE', #34488, 10.50000000000022600 ) ; +#12439 = ADVANCED_FACE ( 'NONE', ( #36366 ), #59732, .F. ) ; +#12440 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 17.83333333333333200, -6.205558038030004800 ) ) ; +#12441 = AXIS2_PLACEMENT_3D ( 'NONE', #72621, #35365, #78887 ) ; +#12442 = PLANE ( 'NONE', #2821 ) ; +#12443 = ORIENTED_EDGE ( 'NONE', *, *, #51418, .F. ) ; +#12444 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#12445 = EDGE_CURVE ( 'NONE', #9140, #32721, #76247, .T. ) ; +#12446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12447 = CIRCLE ( 'NONE', #17184, 10.00000000000009200 ) ; +#12448 = EDGE_LOOP ( 'NONE', ( #11628, #33361, #45587 ) ) ; +#12449 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 9.932503002402294000, -28.20555803802994200 ) ) ; +#12450 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 20.16666666666667500, 9.794441961969994300 ) ) ; +#12451 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621500, 29.33106028708543200, -28.57333386111662700 ) ) ; +#12452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12454 = ORIENTED_EDGE ( 'NONE', *, *, #54173, .T. ) ; +#12455 = CIRCLE ( 'NONE', #57116, 10.50000000000009900 ) ; +#12456 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 11.92856308690589600, -28.36981695106777200 ) ) ; +#12457 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12459 = ADVANCED_FACE ( 'NONE', ( #28620 ), #10081, .T. ) ; +#12460 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#12461 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#12462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12463 = FACE_OUTER_BOUND ( 'NONE', #35651, .T. ) ; +#12465 = EDGE_CURVE ( 'NONE', #39909, #13403, #26645, .T. ) ; +#12464 = VERTEX_POINT ( 'NONE', #38200 ) ; +#12466 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 57.94142842854297700, -28.20555803802997700 ) ) ; +#12467 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12468 = EDGE_CURVE ( 'NONE', #43835, #28330, #80162, .T. ) ; +#12469 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12470 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174864400, 90.16054007504448000, -28.34042301926892500 ) ) ; +#12471 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 90.16054007504463600, -28.34042301926880800 ) ) ; +#12472 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#12473 = EDGE_LOOP ( 'NONE', ( #74776, #68500, #76669 ) ) ; +#12474 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510923000, 41.12856921007281800, -28.37063977681171800 ) ) ; +#12475 = EDGE_CURVE ( 'NONE', #39132, #68875, #43682, .T. ) ; +#12476 = CONICAL_SURFACE ( 'NONE', #39988, 10.50000000000009600, 0.7853981633974500600 ) ; +#12477 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714283800, 57.92318720225497900, -28.70555803802997700 ) ) ; +#12478 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12479 = EDGE_CURVE ( 'NONE', #14521, #8272, #29306, .T. ) ; +#12480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57754, #14243, #64040, #26767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646179600, 0.0009605145132141881500 ), + .UNSPECIFIED. ) ; +#12481 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12482 = CIRCLE ( 'NONE', #6308, 10.00000000000009400 ) ; +#12483 = ORIENTED_EDGE ( 'NONE', *, *, #58990, .T. ) ; +#12484 = AXIS2_PLACEMENT_3D ( 'NONE', #1488, #7732, #44692 ) ; +#12485 = ORIENTED_EDGE ( 'NONE', *, *, #60753, .T. ) ; +#12486 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12487 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 23.66666666666668200, -5.205558038030003100 ) ) ; +#12488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12489 = EDGE_LOOP ( 'NONE', ( #59432, #13343, #28291, #4189 ) ) ; +#12490 = ORIENTED_EDGE ( 'NONE', *, *, #17968, .T. ) ; +#12491 = ORIENTED_EDGE ( 'NONE', *, *, #40702, .F. ) ; +#12492 = VERTEX_POINT ( 'NONE', #954 ) ; +#12493 = EDGE_LOOP ( 'NONE', ( #15176, #44725, #3681, #7213 ) ) ; +#12494 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11024, #54522, #29824, #73308 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.341771812940338300E-018, 0.001179148174662948700 ), + .UNSPECIFIED. ) ; +#12495 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971600, 65.15853008474739700, -28.52629299565626700 ) ) ; +#12496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12498 = ORIENTED_EDGE ( 'NONE', *, *, #7662, .T. ) ; +#12497 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390037600, 60.13716795162663000, -28.48697406221648600 ) ) ; +#12499 = AXIS2_PLACEMENT_3D ( 'NONE', #36228, #79742, #42450 ) ; +#12500 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805677000, 12.41427200762526100, -28.67630847257084200 ) ) ; +#12501 = CARTESIAN_POINT ( 'NONE', ( -15.02626848327745500, 65.71754128061482400, -28.70555803803001600 ) ) ; +#12502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37929, #19189, #44152, #6936 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632933054700E-007, 0.0008082706238600350700 ), + .UNSPECIFIED. ) ; +#12503 = EDGE_CURVE ( 'NONE', #76141, #76951, #14787, .T. ) ; +#12504 = EDGE_CURVE ( 'NONE', #30375, #51949, #78216, .T. ) ; +#12505 = EDGE_CURVE ( 'NONE', #22718, #23333, #45059, .T. ) ; +#12506 = AXIS2_PLACEMENT_3D ( 'NONE', #67580, #30348, #73848 ) ; +#12507 = ORIENTED_EDGE ( 'NONE', *, *, #22377, .F. ) ; +#12508 = FACE_OUTER_BOUND ( 'NONE', #73910, .T. ) ; +#12509 = PLANE ( 'NONE', #79280 ) ; +#12510 = AXIS2_PLACEMENT_3D ( 'NONE', #25734, #69226, #31968 ) ; +#12511 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145289000, 59.73198281203404000, -28.34169759783695900 ) ) ; +#12512 = ORIENTED_EDGE ( 'NONE', *, *, #66874, .F. ) ; +#12513 = VERTEX_POINT ( 'NONE', #51224 ) ; +#12514 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49561, #6102, #68382, #31137 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932795506800 ), + .UNSPECIFIED. ) ; +#12515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12516 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858902700, 87.92318720225479500, -28.70555803802997700 ) ) ; +#12517 = FACE_OUTER_BOUND ( 'NONE', #53758, .T. ) ; +#12518 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 82.31032580521097900, -28.59353418718932400 ) ) ; +#12519 = EDGE_CURVE ( 'NONE', #67137, #7679, #324, .T. ) ; +#12520 = AXIS2_PLACEMENT_3D ( 'NONE', #21924, #59169, #34443 ) ; +#12521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12522 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100922900, 10.47636006919873400, -28.38670679782144600 ) ) ; +#12523 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70510, #2228, #21034, #64568 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576729300 ), + .UNSPECIFIED. ) ; +#12524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12525 = ORIENTED_EDGE ( 'NONE', *, *, #6623, .T. ) ; +#12526 = ADVANCED_FACE ( 'NONE', ( #41209 ), #57800, .T. ) ; +#12527 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.36203212531315600, -28.38801640354855100 ) ) ; +#12528 = FACE_OUTER_BOUND ( 'NONE', #47104, .T. ) ; +#12530 = ORIENTED_EDGE ( 'NONE', *, *, #77852, .T. ) ; +#12529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12531 = ORIENTED_EDGE ( 'NONE', *, *, #40653, .F. ) ; +#12532 = ADVANCED_FACE ( 'NONE', ( #74331 ), #39235, .F. ) ; +#12533 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 67.33333333333334300, 1.294441961969997200 ) ) ; +#12534 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 32.33333333333333600, 2.794441961969998300 ) ) ; +#12535 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265455200, 71.32559822014178500, -28.29986836858018900 ) ) ; +#12536 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 12.15857157145701000, -28.20555803802994200 ) ) ; +#12537 = CIRCLE ( 'NONE', #36899, 10.00000000000009400 ) ; +#12538 = ADVANCED_FACE ( 'NONE', ( #57751 ), #6172, .F. ) ; +#12539 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12540 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 58.17143691309411200, -28.36981695106783300 ) ) ; +#12541 = ADVANCED_FACE ( 'NONE', ( #55799 ), #53857, .T. ) ; +#12542 = CONICAL_SURFACE ( 'NONE', #2004, 10.00000000000009200, 0.7853981633974447300 ) ; +#12543 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 69.66666666666667100, -10.73183747965883100 ) ) ; +#12544 = ORIENTED_EDGE ( 'NONE', *, *, #17967, .F. ) ; +#12545 = EDGE_LOOP ( 'NONE', ( #62204, #36154, #40329 ) ) ; +#12546 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432854400, 39.35339758437810100, -28.20555803802995200 ) ) ; +#12547 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 32.93454006867177200, -28.70555803802998800 ) ) ; +#12548 = AXIS2_PLACEMENT_3D ( 'NONE', #65223, #71436, #21686 ) ; +#12549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12550 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29131, #72615, #10587, #54088 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376926900 ), + .UNSPECIFIED. ) ; +#12551 = ADVANCED_FACE ( 'NONE', ( #61688 ), #20770, .F. ) ; +#12552 = EDGE_CURVE ( 'NONE', #44111, #27352, #66668, .T. ) ; +#12553 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12554 = CIRCLE ( 'NONE', #30599, 10.00000000000009600 ) ; +#12555 = ORIENTED_EDGE ( 'NONE', *, *, #62276, .F. ) ; +#12556 = CARTESIAN_POINT ( 'NONE', ( -3.756937565509201400, 81.43482212736795100, -28.29548618595819700 ) ) ; +#12557 = CIRCLE ( 'NONE', #35987, 10.50000000000009600 ) ; +#12558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12559 = ORIENTED_EDGE ( 'NONE', *, *, #67755, .T. ) ; +#12560 = ORIENTED_EDGE ( 'NONE', *, *, #20102, .F. ) ; +#12561 = AXIS2_PLACEMENT_3D ( 'NONE', #9216, #52747, #15507 ) ; +#12562 = PLANE ( 'NONE', #44652 ) ; +#12563 = ORIENTED_EDGE ( 'NONE', *, *, #46043, .F. ) ; +#12564 = CIRCLE ( 'NONE', #37130, 9.500000000000099500 ) ; +#12565 = EDGE_LOOP ( 'NONE', ( #41499, #44063, #60120, #5286, #62036 ) ) ; +#12566 = VERTEX_POINT ( 'NONE', #45789 ) ; +#12567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#12568 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567155400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#12569 = ORIENTED_EDGE ( 'NONE', *, *, #46496, .T. ) ; +#12570 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 71.08083798124323500, -28.45106778992441600 ) ) ; +#12571 = ORIENTED_EDGE ( 'NONE', *, *, #70945, .T. ) ; +#12572 = ORIENTED_EDGE ( 'NONE', *, *, #59606, .T. ) ; +#12573 = CARTESIAN_POINT ( 'NONE', ( -11.56182508409088800, 41.48385710212512100, -28.57719681746179700 ) ) ; +#12574 = EDGE_LOOP ( 'NONE', ( #31260, #35822, #5271, #33307 ) ) ; +#12575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12578 = ORIENTED_EDGE ( 'NONE', *, *, #30750, .F. ) ; +#12579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12580 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#12581 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12582 = CONICAL_SURFACE ( 'NONE', #25591, 10.50000000000009600, 0.7853981633974500600 ) ; +#12583 = EDGE_CURVE ( 'NONE', #17320, #30748, #52152, .T. ) ; +#12584 = ORIENTED_EDGE ( 'NONE', *, *, #77453, .T. ) ; +#12585 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462480600, 61.39409401757625100, -28.39369363572359400 ) ) ; +#12586 = ORIENTED_EDGE ( 'NONE', *, *, #48068, .T. ) ; +#12587 = EDGE_LOOP ( 'NONE', ( #66518, #28285, #60296 ) ) ; +#12588 = EDGE_CURVE ( 'NONE', #71807, #998, #37284, .T. ) ; +#12589 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477733700, 81.21410430764721900, -28.27354076558355800 ) ) ; +#12590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12591 = CARTESIAN_POINT ( 'NONE', ( 11.80141306497079000, 94.72249899919779600, -28.20555803803047500 ) ) ; +#12592 = CIRCLE ( 'NONE', #24476, 10.00000000000009200 ) ; +#12593 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999798400, 62.97376207875046800, -28.70555803803030800 ) ) ; +#12594 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614821100, 41.60677350908856900, -28.30799595738883300 ) ) ; +#12595 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12596 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5175, #11451, #30235, #73725 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004078900 ), + .UNSPECIFIED. ) ; +#12597 = EDGE_CURVE ( 'NONE', #17606, #56186, #24676, .T. ) ; +#12598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12599 = EDGE_LOOP ( 'NONE', ( #33534, #28424, #57495 ) ) ; +#12600 = EDGE_CURVE ( 'NONE', #38688, #14575, #37697, .T. ) ; +#12601 = AXIS2_PLACEMENT_3D ( 'NONE', #2389, #45891, #8646 ) ; +#12602 = EDGE_CURVE ( 'NONE', #16279, #67117, #23271, .T. ) ; +#12603 = CONICAL_SURFACE ( 'NONE', #26501, 10.50000000000009600, 0.7853981633974518300 ) ; +#12604 = ORIENTED_EDGE ( 'NONE', *, *, #10107, .T. ) ; +#12605 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12606 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8979, #58524, #21548, #65078 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721150700, 0.0008252574424209449600 ), + .UNSPECIFIED. ) ; +#12607 = ORIENTED_EDGE ( 'NONE', *, *, #65980, .T. ) ; +#12608 = ORIENTED_EDGE ( 'NONE', *, *, #10569, .T. ) ; +#12609 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 38.33333333333334300, -8.133761268305512700 ) ) ; +#12610 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 57.94142842854307000, -28.20555803802997700 ) ) ; +#12611 = AXIS2_PLACEMENT_3D ( 'NONE', #11222, #17469, #48436 ) ; +#12612 = EDGE_CURVE ( 'NONE', #25677, #51716, #22723, .T. ) ; +#12613 = EDGE_CURVE ( 'NONE', #65965, #71276, #8773, .T. ) ; +#12614 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466623300, 39.83106028708541400, -28.57333386111662300 ) ) ; +#12615 = EDGE_CURVE ( 'NONE', #29818, #65996, #8094, .T. ) ; +#12616 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#12617 = ADVANCED_FACE ( 'NONE', ( #4210 ), #9062, .T. ) ; +#12618 = AXIS2_PLACEMENT_3D ( 'NONE', #75574, #38290, #1042 ) ; +#12619 = FACE_OUTER_BOUND ( 'NONE', #70347, .T. ) ; +#12620 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056674500, 45.54999999999998300, -28.70555803802996700 ) ) ; +#12621 = FACE_OUTER_BOUND ( 'NONE', #55098, .T. ) ; +#12622 = ORIENTED_EDGE ( 'NONE', *, *, #17295, .F. ) ; +#12623 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12624 = EDGE_CURVE ( 'NONE', #20207, #74407, #68456, .T. ) ; +#12625 = ADVANCED_FACE ( 'NONE', ( #18820 ), #33408, .T. ) ; +#12626 = AXIS2_PLACEMENT_3D ( 'NONE', #65613, #28387, #71869 ) ; +#12627 = AXIS2_PLACEMENT_3D ( 'NONE', #18671, #68439, #74704 ) ; +#12628 = ORIENTED_EDGE ( 'NONE', *, *, #35121, .F. ) ; +#12629 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656745000, 18.35339758437769200, -28.20555803803025800 ) ) ; +#12630 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12631 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69842, #13844, #63884, #26629 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.498374721940738900E-018, 0.001246264537621160200 ), + .UNSPECIFIED. ) ; +#12632 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844488600, 86.13383585008155300, -28.37247596307075500 ) ) ; +#12633 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 41.24660241562189400, -28.20555803802996700 ) ) ; +#12634 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12635 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 9.666666666666667900, 4.294441961969993400 ) ) ; +#12636 = CIRCLE ( 'NONE', #78500, 10.00000000000009200 ) ; +#12637 = VERTEX_POINT ( 'NONE', #71938 ) ; +#12638 = FACE_OUTER_BOUND ( 'NONE', #35020, .T. ) ; +#12639 = ORIENTED_EDGE ( 'NONE', *, *, #65080, .T. ) ; +#12640 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567160700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#12641 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328925600, 31.23798719401657900, -28.29447340919114500 ) ) ; +#12642 = ADVANCED_FACE ( 'NONE', ( #66511 ), #304, .T. ) ; +#12643 = FACE_OUTER_BOUND ( 'NONE', #26642, .T. ) ; +#12644 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#12645 = VERTEX_POINT ( 'NONE', #3628 ) ; +#12646 = VERTEX_POINT ( 'NONE', #47133 ) ; +#12647 = ORIENTED_EDGE ( 'NONE', *, *, #64196, .F. ) ; +#12648 = VERTEX_POINT ( 'NONE', #53420 ) ; +#12649 = ORIENTED_EDGE ( 'NONE', *, *, #61807, .T. ) ; +#12650 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#12651 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026327800, 14.05000000000000600, -28.70555803802992800 ) ) ; +#12652 = ORIENTED_EDGE ( 'NONE', *, *, #46494, .T. ) ; +#12653 = AXIS2_PLACEMENT_3D ( 'NONE', #80304, #43020, #5782 ) ; +#12654 = EDGE_LOOP ( 'NONE', ( #80060, #71466, #78803 ) ) ; +#12655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22742, #60018, #35271, #78786 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122924947400, 0.0007303749718171157100 ), + .UNSPECIFIED. ) ; +#12656 = ADVANCED_FACE ( 'NONE', ( #35395 ), #47965, .T. ) ; +#12657 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12658 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#12659 = AXIS2_PLACEMENT_3D ( 'NONE', #54630, #17380, #60915 ) ; +#12660 = ORIENTED_EDGE ( 'NONE', *, *, #4339, .T. ) ; +#12661 = CARTESIAN_POINT ( 'NONE', ( 17.31587870724596800, 18.47683288890919700, -28.43418176890221700 ) ) ; +#12662 = LINE ( 'NONE', #78032, #43747 ) ; +#12663 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 44.16666666666668600, 0.1341879241256129200 ) ) ; +#12664 = ORIENTED_EDGE ( 'NONE', *, *, #36977, .T. ) ; +#12665 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12666 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655600300, 28.42298334620759400, -28.20555803802994500 ) ) ; +#12667 = ORIENTED_EDGE ( 'NONE', *, *, #11778, .T. ) ; +#12668 = EDGE_CURVE ( 'NONE', #36778, #9694, #75128, .T. ) ; +#12669 = ORIENTED_EDGE ( 'NONE', *, *, #70977, .T. ) ; +#12670 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823704200, 48.69543746431602900, -28.61277292027075300 ) ) ; +#12671 = AXIS2_PLACEMENT_3D ( 'NONE', #6614, #50094, #12901 ) ; +#12672 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 51.65075715145312800, -28.20555803802997700 ) ) ; +#12673 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12674 = CIRCLE ( 'NONE', #71263, 10.00000000000009400 ) ; +#12675 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148450900, 13.09761904761897000, -28.70555803803009500 ) ) ; +#12676 = ADVANCED_FACE ( 'NONE', ( #2239 ), #14918, .F. ) ; +#12677 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618200, 80.79999999999968500, -28.55171188418406200 ) ) ; +#12678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12679 = AXIS2_PLACEMENT_3D ( 'NONE', #66134, #35133, #41353 ) ; +#12680 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12681 = ORIENTED_EDGE ( 'NONE', *, *, #58339, .F. ) ; +#12682 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12683 = CARTESIAN_POINT ( 'NONE', ( 10.62849472960813900, 81.43250300240197200, -28.25053119339314400 ) ) ; +#12684 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12685 = ORIENTED_EDGE ( 'NONE', *, *, #55818, .T. ) ; +#12686 = PLANE ( 'NONE', #27164 ) ; +#12687 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 33.87738371066728100, -28.70555803802996700 ) ) ; +#12688 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12689 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041600, 68.17143691309398400, -28.36981695106829800 ) ) ; +#12690 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12691 = AXIS2_PLACEMENT_3D ( 'NONE', #39318, #2046, #45544 ) ; +#12692 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#12693 = FACE_OUTER_BOUND ( 'NONE', #10777, .T. ) ; +#12694 = VERTEX_POINT ( 'NONE', #59968 ) ; +#12695 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.65857157145701700, -28.20555803802997700 ) ) ; +#12696 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55726, #67986, #24733, #68249 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656170384500, 0.001370301364302576800 ), + .UNSPECIFIED. ) ; +#12697 = ORIENTED_EDGE ( 'NONE', *, *, #26209, .T. ) ; +#12698 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#12699 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702758600, 52.22511094383829500, -28.55192314908433500 ) ) ; +#12700 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571447500, 41.52858243452107000, -28.70555803802997700 ) ) ; +#12701 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12702 = CARTESIAN_POINT ( 'NONE', ( -3.360497072202806000, 41.43250300240230600, -28.25438406275899800 ) ) ; +#12703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12705 = EDGE_CURVE ( 'NONE', #45474, #72943, #60689, .T. ) ; +#12706 = FACE_OUTER_BOUND ( 'NONE', #22483, .T. ) ; +#12707 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12708 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 50.50000000000002100, -9.258116921287651700 ) ) ; +#12709 = EDGE_CURVE ( 'NONE', #73841, #44043, #16877, .T. ) ; +#12710 = ORIENTED_EDGE ( 'NONE', *, *, #65878, .F. ) ; +#12711 = ORIENTED_EDGE ( 'NONE', *, *, #42612, .F. ) ; +#12712 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12713 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 15.66666666666667100, 3.124568980892192800 ) ) ; +#12714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12715 = EDGE_CURVE ( 'NONE', #20890, #78429, #49916, .T. ) ; +#12716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12717 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12718 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#12719 = CONICAL_SURFACE ( 'NONE', #24748, 10.50000000000009600, 0.7853981633974500600 ) ; +#12720 = EDGE_LOOP ( 'NONE', ( #3660, #75550, #78340 ) ) ; +#12721 = ORIENTED_EDGE ( 'NONE', *, *, #47594, .F. ) ; +#12722 = EDGE_CURVE ( 'NONE', #72096, #9518, #31480, .T. ) ; +#12723 = EDGE_CURVE ( 'NONE', #26473, #30072, #46168, .T. ) ; +#12724 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.43250300240228500, -28.20555803802997700 ) ) ; +#12725 = ORIENTED_EDGE ( 'NONE', *, *, #25060, .F. ) ; +#12726 = CIRCLE ( 'NONE', #75619, 10.50000000000009200 ) ; +#12727 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#12728 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 18.00000000000000700, -12.20555803803000200 ) ) ; +#12729 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#12730 = ORIENTED_EDGE ( 'NONE', *, *, #65397, .T. ) ; +#12731 = ORIENTED_EDGE ( 'NONE', *, *, #76206, .T. ) ; +#12732 = ORIENTED_EDGE ( 'NONE', *, *, #24613, .T. ) ; +#12733 = CARTESIAN_POINT ( 'NONE', ( 9.621978672527612600, 18.13131911501838900, -28.51286550264558900 ) ) ; +#12734 = ORIENTED_EDGE ( 'NONE', *, *, #71057, .F. ) ; +#12735 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ; +#12736 = AXIS2_PLACEMENT_3D ( 'NONE', #40519, #65580, #28338 ) ; +#12737 = EDGE_CURVE ( 'NONE', #60512, #44982, #64576, .T. ) ; +#12738 = EDGE_CURVE ( 'NONE', #25758, #21619, #31749, .T. ) ; +#12739 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#12740 = EDGE_CURVE ( 'NONE', #70927, #50476, #17281, .T. ) ; +#12741 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38807, #45040, #20349, #63882 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.731967063190383200E-016, 0.001179148174663660400 ), + .UNSPECIFIED. ) ; +#12742 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306345300, 28.50210619075126000, -28.25343951603343500 ) ) ; +#12743 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286462000, 58.93300507136145700, -28.67024809316607700 ) ) ; +#12744 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223634200, 69.83407839971529500, -28.37510699173776600 ) ) ; +#12745 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12746 = FACE_OUTER_BOUND ( 'NONE', #75939, .T. ) ; +#12747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12748 = ORIENTED_EDGE ( 'NONE', *, *, #55698, .F. ) ; +#12749 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .F. ) ; +#12750 = ADVANCED_FACE ( 'NONE', ( #79168 ), #54489, .T. ) ; +#12751 = ORIENTED_EDGE ( 'NONE', *, *, #54982, .F. ) ; +#12752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12753 = ORIENTED_EDGE ( 'NONE', *, *, #36750, .F. ) ; +#12754 = ORIENTED_EDGE ( 'NONE', *, *, #65267, .T. ) ; +#12755 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 79.28967419478925600, -28.59353418718928100 ) ) ; +#12756 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#12757 = CARTESIAN_POINT ( 'NONE', ( -3.985743576841977100, 81.58004100757875700, -28.24987021275305900 ) ) ; +#12758 = ADVANCED_FACE ( 'NONE', ( #46019 ), #60673, .T. ) ; +#12759 = CONICAL_SURFACE ( 'NONE', #67572, 10.50000000000009400, 0.7853981633974500600 ) ; +#12760 = AXIS2_PLACEMENT_3D ( 'NONE', #47512, #10293, #53796 ) ; +#12761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12762 = AXIS2_PLACEMENT_3D ( 'NONE', #73556, #55297, #5547 ) ; +#12763 = VERTEX_POINT ( 'NONE', #48465 ) ; +#12764 = AXIS2_PLACEMENT_3D ( 'NONE', #57263, #20028, #63553 ) ; +#12765 = ADVANCED_FACE ( 'NONE', ( #44060 ), #27572, .F. ) ; +#12766 = VERTEX_POINT ( 'NONE', #23770 ) ; +#12767 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#12769 = CARTESIAN_POINT ( 'NONE', ( -15.12207074529080400, 9.755858509418379400, -28.70257734043093800 ) ) ; +#12768 = CARTESIAN_POINT ( 'NONE', ( 8.314034490221695600, 24.54999999999998600, -28.37321477197627900 ) ) ; +#12770 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12771 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 21.50000000000001400, 4.650848422521012700 ) ) ; +#12772 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#12773 = CONICAL_SURFACE ( 'NONE', #14924, 10.50000000000009400, 0.7853981633974500600 ) ; +#12774 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12775 = VERTEX_POINT ( 'NONE', #67276 ) ; +#12776 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868847300, 80.01994747561606400, -28.24986299608863000 ) ) ; +#12777 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12778 = PLANE ( 'NONE', #59555 ) ; +#12779 = EDGE_CURVE ( 'NONE', #39888, #7051, #2791, .T. ) ; +#12780 = CARTESIAN_POINT ( 'NONE', ( 2.530136888809636700, 9.146957350529760300, -28.66910751791843700 ) ) ; +#12781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12782 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925629000, 38.31967837323414000, -28.55467576046957100 ) ) ; +#12783 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12784 = PLANE ( 'NONE', #6823 ) ; +#12785 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003200, 81.43250300240195800, -28.20555803803030800 ) ) ; +#12786 = EDGE_CURVE ( 'NONE', #58270, #79429, #62610, .T. ) ; +#12787 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .T. ) ; +#12788 = VERTEX_POINT ( 'NONE', #36260 ) ; +#12789 = AXIS2_PLACEMENT_3D ( 'NONE', #58668, #34199, #71453 ) ; +#12790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66018, #59765, #16245, #72287 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283333317800, 0.0007287255810282970400 ), + .UNSPECIFIED. ) ; +#12791 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 60.34267608797601700, -28.20555803802997700 ) ) ; +#12792 = EDGE_LOOP ( 'NONE', ( #15019, #34035, #67747 ) ) ; +#12793 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12794 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929814400, 75.79999999999996900, -28.70555803802997700 ) ) ; +#12795 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#12796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12797 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 67.92318720225497900, -28.70555803802997700 ) ) ; +#12798 = CIRCLE ( 'NONE', #29443, 9.500000000000099500 ) ; +#12799 = EDGE_LOOP ( 'NONE', ( #30951, #34497, #10822, #25367, #62490, #7495, #76308 ) ) ; +#12800 = AXIS2_PLACEMENT_3D ( 'NONE', #8332, #39343, #51831 ) ; +#12801 = VERTEX_POINT ( 'NONE', #17519 ) ; +#12802 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#12803 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725212400, 14.04999999999952800, -28.20555803803025800 ) ) ; +#12804 = CONICAL_SURFACE ( 'NONE', #1033, 10.50000000000009400, 0.7853981633974500600 ) ; +#12805 = ORIENTED_EDGE ( 'NONE', *, *, #57399, .T. ) ; +#12806 = ORIENTED_EDGE ( 'NONE', *, *, #38261, .T. ) ; +#12807 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807122900, 66.79999999999994000, -28.70555803802997700 ) ) ; +#12808 = ORIENTED_EDGE ( 'NONE', *, *, #57894, .T. ) ; +#12809 = EDGE_LOOP ( 'NONE', ( #44274, #13981, #46971, #71306 ) ) ; +#12810 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 65.16666666666668600, -2.545304000185620600 ) ) ; +#12811 = AXIS2_PLACEMENT_3D ( 'NONE', #41823, #48059, #79117 ) ; +#12812 = CONICAL_SURFACE ( 'NONE', #39541, 10.00000000000009600, 0.7853981633974447300 ) ; +#12813 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#12814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12815 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 30.16666666666668600, -3.349151577478988200 ) ) ; +#12816 = ORIENTED_EDGE ( 'NONE', *, *, #55718, .F. ) ; +#12817 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007600, 73.42856308690549800, -28.36981695106819100 ) ) ; +#12818 = FACE_OUTER_BOUND ( 'NONE', #10649, .T. ) ; +#12819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12820 = EDGE_CURVE ( 'NONE', #11576, #54633, #69136, .T. ) ; +#12821 = ORIENTED_EDGE ( 'NONE', *, *, #72536, .T. ) ; +#12822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12823 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609429500, 71.46283204837338600, -28.48697406221667100 ) ) ; +#12824 = VERTEX_POINT ( 'NONE', #48996 ) ; +#12825 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 67.50000000000000000, 6.847000845227646500 ) ) ; +#12826 = ORIENTED_EDGE ( 'NONE', *, *, #55683, .T. ) ; +#12827 = VERTEX_POINT ( 'NONE', #36515 ) ; +#12828 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 0.0000000000000000000, -18.70555803802999900 ) ) ; +#12829 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#12830 = CIRCLE ( 'NONE', #12309, 9.500000000000101300 ) ; +#12831 = CARTESIAN_POINT ( 'NONE', ( -3.073491842515243500, 60.22161678501181800, -28.29547179040448100 ) ) ; +#12832 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12834 = ADVANCED_FACE ( 'NONE', ( #77198 ), #58691, .T. ) ; +#12833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26842, #51547, #39321, #2050 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800051300 ), + .UNSPECIFIED. ) ; +#12835 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540386100, 59.08026449164324800, -28.70555803803019800 ) ) ; +#12836 = EDGE_CURVE ( 'NONE', #20496, #23125, #54674, .T. ) ; +#12837 = EDGE_CURVE ( 'NONE', #2942, #39293, #40201, .T. ) ; +#12838 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873545500, 47.92044679784049100, -28.64059091698901600 ) ) ; +#12839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#12840 = CONICAL_SURFACE ( 'NONE', #62839, 10.50000000000009800, 0.7853981633974518300 ) ; +#12841 = ORIENTED_EDGE ( 'NONE', *, *, #44951, .F. ) ; +#12842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29882, #67095, #79611, #42313 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716406200, 0.004080294652942992100 ), + .UNSPECIFIED. ) ; +#12843 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 37.16545993132819300, -28.70555803802998100 ) ) ; +#12844 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428576500, 39.07141756547892400, -28.70555803802995200 ) ) ; +#12845 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 45.23212903577628900, -28.37244029424742200 ) ) ; +#12846 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#12847 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 89.91070809551058600, -28.20555803802997700 ) ) ; +#12848 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #13134, #62903, #75396, #38099, #848, #44326, #7103, #50597, #13400, #56895, #19636, #63168, #25905, #69390, #32142, #75647, #38362, #1109, #44590, #7360, #50867, #13666, #57164, #19911, #63436, #26176, #69660, #32410, #75914, #38623, #1380, #44863, #7630, #51114, #13926, #57427, #20177, #63709, #26453, #69923, #32671, #76181, #38897, #1648, #45133, #7901, #51392, #14189, #57693, #20442, #63981, #26713, #70186, #32936, #76448, #39173, #1912, #45400, #8158, #51662, #14454, #57962, #20714, #64250, #26977, #70459, #33207, #76717, #39452, #2179, #45675, #8432, #51934, #14711, #58223, #20991, #64524, #27246, #70729, #33476, #76991, #39724, #2446, #45961, #8699, #52199, #14980, #58500, #21256, #64786, #27518, #71002, #33749, #77262, #39997, #2707, #46221, #8958, #52479, #15253, #58763, #21523, #65055, #27789, #71280, #34013, #77530, #40252, #2988, #46478, #9236, #52767, #15526, #59029, #21789, #65337, #28067, #71552, #34291, #77796, #40525, #3251, #46759, #9520, #53028, #15787, #59302, #22052, #65589, #28348, #71830, #34568, #78075, #40793, #3522, #47030, #9804, #53310, #16059, #59589, #22311, #65844, #28612, #72111, #34843, #78353, #41072, #3796, #47289, #10073, #53586, #16337, #59862, #22581, #66116, #28890, #72378, #35119, #78634, #41337, #4079, #47560, #10340, #53848, #16599, #60131, #22847, #66379, #29157, #72635, #35388, #78902, #41602, #4340, #47836, #10611, #54106, #16868, #60404, #23132, #66638, #29419, #72897, #35637, #79159, #41863, #4614, #48097, #10882, #54373, #17134, #60665, #23387, #66910, #29667, #73174, #35891, #79414, #42120, #4873, #48371, #11153, #54651, #17400, #60930, #23666, #67171, #29953, #73429, #36167, #79674, #42386, #5148, #48634, #11425, #54914, #17678, #61200, #23935, #67440, #30208, #73701, #36409, #79958, #42657, #5422, #48901, #11693, #55175, #17930, #61475, #24197, #67703, #30466, #73971, #36685, #80211, #42931, #5678, #49167, #11953, #55441, #18199, #61740, #24462, #67966, #30718, #74255, #36943, #80490, #43192, #5965, #49430, #12216, #55703, #18466, #62001, #24719, #68234, #30988, #74501, #37202, #80742, #43460, #6219, #49694, #12487, #55977, #18733, #62258, #24992, #68510, #31257, #74767, #37459, #225, #43712, #6484, #49962, #12771, #56246, #18985, #62523, #25264, #68773, #31526, #75035, #37737, #482, #43976, #6746, #50240, #13032, #56521, #19262, #62802, #25546, #69036, #31790, #75296, #38010, #748, #44233, #7014, #50492, #13303, #56791, #19542, #63063, #25808, #69296, #32046, #75551, #38262, #1017, #44499, #7263, #50772, #13570, #57072, #19810, #63346, #26079, #69559, #32314, #75815, #38522, #1287, #44765, #7530, #51027, #13830, #57325, #20086, #63607, #26355, #69833, #32570, #76084, #38798, #1556, #45033, #7802, #51292, #14086, #57593, #20339, #63875, #26618, #70089, #32834, #76353, #39070, #1805, #45309, #8068, #51570, #14352, #57863, #20616, #64153, #26875, #70359, #33116, #76614, #39345, #2084, #45571, #8333, #51834, #14623, #58130, #20884, #64424, #27139, #70636, #33377, #76899, #39631, #2345, #45854, #8601, #52110, #14886, #58407, #21159, #64682, #27425, #70902, #33652, #77165, #39903, #2611, #46124, #8861, #52374, #15151, #58659, #21430, #64960, #27684, #71178, #33914, #77431, #40158, #2893, #46376, #9127, #52662, #15422, #58929, #21696, #65232, #27966, #71446, #34190, #77696, #40434, #3155, #46662, #9418, #52927, #15692, #59198, #21949, #65493, #28244, #71733, #34464, #77973, #40686, #3427, #46926 ), + ( #9702, #53204, #15957, #59485, #22214, #65751, #28514, #72006, #34738, #78245, #40978, #3694, #47195, #9967, #53489, #16234, #59757, #22486, #66011, #28788, #72277, #35013, #78533, #41233, #3970, #47452, #10248, #53744, #16501, #60032, #22749, #66285, #29058, #72540, #35284, #78799, #41502, #4236, #47737, #10509, #54008, #16758, #60301, #23023, #66535, #29322, #72796, #35551, #79061, #41757, #4508, #47992, #10778, #54275, #17041, #60561, #23282, #66803, #29571, #73071, #35794, #79319, #42023, #4765, #48263, #11050, #54550, #17291, #60835, #23551, #67071, #29852, #73331, #36065, #79584, #42288, #5041, #48527, #11323, #54806, #17579, #61100, #23838, #67334, #30111, #73595, #36321, #79856, #42560, #5322, #48800, #11590, #55079, #17840, #61383, #24100, #67607, #30368, #73878, #36577, #80115, #42835, #5590, #49068, #11854, #55339, #18096, #61639, #24364, #67874, #30639, #74146, #36839, #80382, #43099, #5866, #49332, #12120, #55611, #18368, #61904, #24624, #68135, #30888, #74411, #37102, #80645, #43360, #6120, #49594, #12399, #55881, #18634, #62159, #24896, #68401, #31164, #74669, #37363, #115, #43618, #6388, #49866, #12663, #56146, #18891, #62421, #25155, #68671, #31423, #74935, #37632, #386, #43876, #6646, #50131, #12925, #56415, #19168, #62694, #25439, #68928, #31690, #75194, #37909, #651, #44135, #6914, #50389, #13204, #56686, #19434, #62971, #25715, #69203, #31949, #75460, #38165, #920, #44398, #7167, #50672, #13473, #56973, #19708, #63245, #25984, #69465, #32214, #75709, #38428, #1188, #44662, #7438, #50938, #13743, #57231, #19986, #63510, #26255, #69734, #32475, #75992, #38693, #1455, #44936, #7700, #51189, #13994, #57497, #20242, #63776, #26519, #69991, #32740, #76256, #38969, #1712, #45211, #7971, #51467, #14254, #57765, #20511, #64047, #26777, #70261, #33012, #76514, #39248, #1987, #45471, #8228, #51729, #14522, #58033, #20783, #64322, #27048, #70534, #33281, #76791, #39526, #2251, #45748, #8500, #52004, #14782, #58300, #21059, #64588, #27321, #70803, #33547, #77064, #39794, #2513, #46030, #8767, #52274, #15052, #58563, #21328, #64856, #27586, #71075, #33819, #77334, #40061, #2782, #46283, #9034, #52556, #15328, #58829, #21598, #65123, #27860, #71351, #34087, #77599, #40324, #3055, #46552, #9312, #52836, #49796, #52528, #15295, #58795, #21572, #65091, #27834, #71313, #34061, #77577, #40290, #3029, #46521, #9281, #52803, #15567, #59074, #21821, #65379, #28101, #71601, #34336, #77843, #40566, #3293, #46806, #9560, #53072, #15827, #59351, #22097, #65617, #28396, #71875, #34614, #78108, #40847, #3569, #47066, #9847, #53352, #16105, #59632, #22355, #65892, #28658, #72152, #34874, #78405, #41116, #3838, #47332, #10118, #53630, #16377, #59902, #22628, #66158, #28930, #72416, #35170, #78671, #41374, #4117, #47609, #10389, #53885, #16643, #60171, #22896, #66421, #29197, #72682, #35424, #78946, #41637, #4386, #47879, #10658, #54145, #16909, #60453, #23166, #66682, #29459, #72945, #35679, #79199, #41913, #4650, #48142, #10922, #54423, #17179, #60701, #23428, #66951, #29718, #73210, #35933, #79466, #42156, #4922, #48406, #11201, #54690, #17444, #60969, #23712, #67220, #29986, #73469, #36201, #79722, #42430, #5187, #48679, #11466, #54957, #17715, #61253, #23982, #67470, #30250, #73745, #36453, #79996, #42701, #5465, #48943, #11737, #55214, #17979, #61518, #24234, #67751, #30508, #74024, #36723, #80253, #42973, #5730, #49212, #11988, #55497, #18246, #61779 ), + ( #24501, #68013, #30768, #74290, #36987, #80530, #43245, #6003, #49470, #12271, #55750, #18512, #62042, #24768, #68275, #31032, #74544, #37243, #80799, #43497, #6259, #49743, #12533, #56025, #18774, #62311, #25035, #68555, #31300, #74808, #37508, #258, #43759, #6531, #50010, #12810, #56284, #19034, #62563, #25319, #68813, #31568, #75080, #37780, #522, #44017, #6798, #50278, #13078, #56562, #19304, #62849, #25583, #69087, #31839, #75338, #38045, #789, #44279, #7047, #50544, #13345, #56840, #19582, #63105, #25857, #69338, #32093, #75590, #38308, #1063, #44534, #7309, #50810, #13620, #57115, #19855, #63386, #26125, #69605, #32349, #75868, #38570, #1328, #44812, #7573, #51073, #13872, #57374, #20129, #63656, #26399, #69871, #32620, #76124, #38845, #1598, #45076, #7848, #51339, #14131, #57631, #20392, #63921, #26656, #70139, #32879, #76397, #39112, #1859, #45354, #8105, #51609, #14395, #57915, #20655, #64201, #26925, #70408, #33160, #76660, #39398, #2121, #45623, #8372, #51881, #14668, #58172, #20933, #64469, #27194, #70679, #33423, #76942, #39674, #2399, #45898, #8651, #52158, #14932, #58445, #21208, #64742, #27464, #70950, #33694, #77212, #39951, #2658, #46173, #8906, #52426, #15196, #58714, #21480, #65003, #27736, #71222, #33965, #77481, #40204, #2946, #46431, #9184, #52705, #15478, #58977, #21740, #65285, #28020, #71502, #34234, #77742, #40476, #3207, #46713, #9462, #52979, #15737, #59250, #21995, #65543, #28294, #71780, #34520, #78016, #40745, #3470, #46976, #9755, #53260, #16013, #59533, #22264, #65794, #28566, #72058, #34792, #78307, #41021, #3743, #47241, #10023, #53537, #16287, #59813, #22532, #66066, #28835, #72328, #35071, #78584, #41284, #4022, #47510, #10291, #53795, #16554, #60083, #22804, #66322, #29107, #72588, #35338, #78853, #41556, #4294, #47781, #10559, #54055, #16819, #60354, #23078, #66587, #29367, #72851, #35587, #79107, #41815, #4564, #48049, #10825, #54326, #17089, #60612, #23336, #66861, #29622, #73115, #35842, #79370, #42073, #4822, #48321, #11103, #54600, #17346, #60883, #23612, #67125, #29901, #73386, #36115, #79633, #42341, #5095, #48582, #11376, #54865, #17625, #61154, #23886, #67384, #30159, #73649, #36367, #79902, #42609, #5371, #48856, #11642, #55126, #17886, #61426, #24145, #67654, #30421, #73929, #36628, #80163, #42879, #5634, #49115, #11904, #55393, #18147, #61689, #24411, #67923, #30675, #74201, #36890, #80438, #43153, #5911, #49379, #12170, #55661, #18418, #61951, #24677, #68179, #30936, #74453, #37152, #80700, #43409, #6173, #49641, #12440, #55925, #18685, #62211, #24940, #68457, #31210, #74716, #37413, #173, #43664, #6435, #49917, #12713, #56194, #18939, #62471, #25209, #68716, #31481, #74976, #37683, #430, #43932, #6696, #50185, #12979, #56463, #19211, #62749, #25489, #68986, #31737, #75246, #37952, #703, #44184, #6959, #50438, #13250, #56737, #19486, #63014, #25761, #69256, #31997, #75499, #38220, #966, #44449, #7214, #50726, #13517, #57022, #19762, #63293, #26031, #69513, #32258, #75766, #38470, #1238, #44708, #7488, #50983, #13788, #57281, #20036, #63568, #26305, #69779, #32527, #76037, #38742, #1505, #44993, #7746, #51241, #14038, #57550, #20293, #63822, #26569, #70042, #32784, #76298, #39019, #1765, #45256, #8023, #51514, #14306, #57818, #20563, #64098, #26819, #70315, #33054, #76564, #39298, #2032, #45525, #8277, #51788, #14566, #58079, #20828, #64380, #27094, #70582, #33331, #76839, #39579, #2292 ), + ( #45801, #8554, #52056, #14836, #58346, #21114, #64635, #27372, #70850, #33596, #77120, #39845, #2560, #46078, #8810, #52322, #15096, #58620, #21372, #64909, #27634, #71128, #33871, #77384, #40114, #2832, #46330, #9078, #52606, #15381, #58877, #21651, #65168, #27922, #71394, #34141, #77647, #40374, #3113, #46601, #9366, #52883, #15648, #59144, #21898, #65454, #28188, #71680, #34411, #77926, #40648, #3374, #46882, #9647, #53157, #15905, #59434, #22171, #65695, #28468, #71951, #34685, #78198, #40928, #3644, #47144, #9924, #53427, #16184, #59708, #22435, #65966, #28732, #72232, #34958, #78484, #41187, #3923, #47406, #10189, #53700, #16448, #59980, #22706, #66238, #29009, #72488, #35240, #78745, #41457, #4195, #47684, #10461, #53956, #16716, #60244, #22972, #66491, #29280, #72754, #35491, #79024, #41703, #4461, #47948, #10740, #54226, #16980, #60521, #23235, #66765, #29527, #73024, #35749, #79266, #41986, #4715, #48217, #11002, #54506, #17248, #60778, #23514, #67018, #29797, #73288, #36020, #79537, #42232, #5000, #48473, #11276, #54759, #17530, #61055, #23779, #67294, #30061, #73553, #36274, #79806, #42514, #5265, #48756, #11542, #55035, #17791, #61332, #24050, #67554, #30332, #73817, #36531, #80067, #42783, #5542, #49009, #11814, #55291, #18054, #61587, #24317, #67830, #30581, #74102, #36793, #80333, #43047, #5812, #49287, #12071, #55573, #18314, #61857, #24579, #68090, #30844, #74361, #37063, #80594, #43317, #6077, #49545, #12349, #55823, #18594, #62115, #24848, #68350, #31116, #74621, #37311, #74, #43570, #6344, #49813, #12609, #56103, #18846, #62377, #25108, #68632, #31378, #74888, #37585, #332, #43837, #6597, #50081, #12884, #56364, #19110, #62639, #25402, #68881, #31644, #75149, #37859, #603, #44086, #6873, #50346, #13163, #56631, #19382, #62926, #25663, #69156, #31903, #75419, #38122, #871, #44352, #7122, #50631, #13424, #56927, #19667, #63194, #25934, #69413, #32174, #75668, #38386, #1134, #44615, #7394, #50885, #13703, #57190, #19938, #63464, #26206, #69689, #32429, #75944, #38647, #1414, #44891, #7648, #51142, #13945, #57459, #20199, #63735, #26477, #69944, #32695, #76202, #38931, #1673, #45159, #7928, #51419, #14211, #57713, #20472, #64003, #26739, #70213, #32960, #76474, #39195, #1941, #45423, #8185, #51688, #14474, #57988, #20733, #64282, #27003, #70485, #33237, #76741, #39477, #2202, #45708, #8454, #51955, #14738, #58250, #21017, #64543, #27276, #70756, #33505, #77017, #39749, #2476, #45979, #8725, #52229, #15008, #58527, #21277, #64812, #27542, #71035, #33771, #77285, #40026, #2730, #46244, #8982, #52511, #15281, #58787, #21551, #65081, #27819, #71296, #34045, #77560, #40279, #3014, #46505, #9264, #52787, #15556, #59052, #21814, #65364, #28089, #71580, #34319, #77827, #40550, #3278, #46787, #9547, #53056, #15807, #59337, #22080, #65607, #28377, #71861, #34597, #78093, #40828, #3550, #47056, #9833, #53333, #17192, #60716, #23443, #66968, #29729, #73225, #35945, #79482, #42170, #4935, #48421, #11210, #54703, #17456, #60986, #23725, #67231, #30002, #73480, #36218, #79733, #42446, #5205, #48692, #11482, #54967, #17730, #61264, #23997, #67486, #30264, #73764, #36461, #80009, #42712, #5481, #48954, #11750, #55232, #17988, #61531, #24245, #67768, #30524, #74035, #36737, #80265, #42988, #5740, #49228, #12003, #55510, #18261, #61790, #24515, #68027, #30782, #74304, #37003, #80542, #43253, #6019, #49480, #12288, #55768, #18526, #62057, #24780 ), + ( #68290, #31043, #74562, #37258, #7, #43514, #6271, #49757, #12543, #56042, #18788, #62326, #25048, #68566, #31317, #74819, #37524, #275, #43774, #6544, #50018, #12825, #56296, #19052, #62577, #25333, #68827, #31578, #75093, #37794, #536, #44032, #6810, #50290, #13089, #56577, #19313, #62865, #25601, #69101, #31850, #75350, #38059, #800, #44294, #7058, #50558, #13360, #56849, #19597, #63119, #25869, #69352, #32106, #75602, #38320, #1078, #44542, #7325, #50826, #13633, #57130, #19869, #63400, #26133, #69621, #32365, #75883, #38585, #1336, #44827, #7586, #51087, #13887, #57389, #20138, #63665, #26416, #69883, #32635, #76139, #38858, #1611, #45089, #7862, #51349, #14151, #57646, #20404, #63937, #26668, #70152, #32890, #76413, #39129, #1872, #45367, #8115, #51623, #14409, #57931, #20671, #64216, #26940, #70419, #33174, #76672, #39414, #2135, #45636, #8387, #51892, #14682, #58184, #20951, #64484, #27209, #70691, #33433, #76955, #39687, #2417, #45915, #8663, #52171, #14943, #58462, #21220, #64755, #27476, #70966, #33708, #77223, #39966, #2671, #46188, #8919, #52441, #15214, #58722, #21496, #65014, #27751, #71237, #33979, #77498, #40215, #2960, #46445, #9202, #52721, #15492, #58993, #21748, #65304, #28033, #71519, #34248, #77755, #40495, #3218, #46725, #9476, #52994, #15751, #59266, #22012, #65553, #28310, #71793, #34536, #78034, #40759, #3486, #46986, #9773, #53273, #16027, #59547, #22277, #65809, #28573, #72076, #34806, #78320, #41035, #3756, #47258, #10033, #53553, #16297, #59827, #22546, #66078, #28849, #72339, #35088, #78596, #41300, #4039, #47524, #10306, #53805, #16571, #60096, #22819, #66337, #29121, #72602, #35348, #78871, #41571, #4311, #47793, #10573, #54074, #16830, #60368, #23092, #66606, #29381, #72862, #35602, #79120, #41830, #4576, #48064, #10840, #54337, #17101, #60624, #23356, #66875, #29635, #73130, #35856, #79385, #42082, #4836, #48334, #11117, #54613, #17361, #60900, #23623, #67138, #29916, #73399, #36130, #79643, #42355, #5105, #48596, #11388, #54876, #17639, #61166, #23897, #67393, #30176, #73663, #36377, #79914, #42620, #5386, #48864, #11656, #55139, #17898, #61438, #24158, #67669, #30429, #73939, #36641, #80179, #42893, #5645, #49128, #11912, #55406, #18158, #61701, #24424, #67932, #30685, #74209, #36907, #80448, #43163, #5925, #49392, #12183, #55667, #18432, #61966, #24690, #68191, #30949, #74469, #37161, #80712, #43424, #6188, #49654, #12450, #55938, #18696, #62227, #24950, #68471, #31222, #74728, #37426, #180, #43679, #6446, #49930, #12728, #56210, #18953, #62480, #25227, #68731, #31491, #74992, #37695, #445, #43940, #6713, #50199, #12994, #56478, #19222, #62765, #25501, #69003, #31746, #75259, #37967, #714, #44200, #6969, #50458, #13262, #56753, #19502, #63028, #25776, #69262, #32012, #75511, #77206, #39941, #2653, #46164, #8901, #52419, #15189, #58709, #21469, #65000, #27727, #71214, #33958, #77474, #40198, #2935, #46426, #9175, #52699, #15472, #58971, #21737, #65269, #28014, #71494, #34227, #77735, #40470, #3203, #46702, #9457, #52973, #15732, #59243, #21988, #65539, #28283, #71777, #34512, #78011, #40741, #3464, #46972, #9745, #53252, #16005, #59528, #22259, #65789, #28563, #72047, #34787, #78301, #41016, #3738, #47234, #10018, #53527, #16280, #59805, #22527, #66061, #28828, #72326, #35062, #78579, #41274, #4016, #47504, #10285, #53793, #16544, #60078, #22798, #66315, #29103, #72584, #35332, #78841, #41550, #4286 ), + ( #47776, #10554, #54050, #16817, #60345, #23070, #66581, #29360, #72846, #35582, #79104, #41805, #4558, #48042, #10820, #54323, #17084, #60609, #23325, #66854, #29615, #73108, #35838, #79364, #42072, #4813, #48315, #11097, #54596, #17339, #60877, #23611, #67115, #29895, #73380, #36109, #79629, #42334, #5092, #48574, #11369, #54856, #17620, #61150, #23880, #67381, #30153, #73643, #36361, #79896, #42604, #5364, #48853, #11632, #55120, #17880, #61421, #24140, #67649, #30418, #73921, #36622, #80154, #42873, #5631, #49106, #11901, #55385, #18141, #61683, #24406, #67918, #30669, #74195, #36881, #80434, #43146, #5904, #49375, #12165, #55657, #18410, #61946, #24670, #68173, #30930, #74447, #37148, #80693, #43403, #6168, #49638, #12436, #55918, #18682, #62201, #24934, #68450, #31205, #74712, #37407, #168, #43658, #6430, #49910, #12708, #56189, #18932, #62469, #25200, #68710, #31475, #74972, #37677, #421, #43929, #6687, #50177, #12974, #56458, #19206, #62740, #25485, #68978, #31732, #75237, #37949, #697, #44173, #6955, #50430, #13243, #56731, #19481, #63008, #25755, #69253, #31989, #75493, #38211, #962, #44443, #7205, #50723, #13511, #57017, #20860, #64399, #27119, #70606, #33355, #76868, #39602, #2319, #45825, #8578, #52079, #14859, #58383, #21136, #64659, #27391, #70881, #33623, #77136, #39878, #2592, #46102, #8828, #52353, #15124, #58639, #21400, #64934, #27663, #71147, #33890, #77405, #40137, #2867, #46353, #9106, #52630, #15400, #58902, #21669, #65205, #27945, #71418, #34159, #77676, #40401, #3129, #46638, #9395, #52906, #15663, #59171, #21926, #65474, #28216, #71706, #34445, #77946, #40668, #3399, #46907, #9676, #53177, #15934, #59460, #22194, #65720, #28491, #71986, #34711, #78223, #40951, #3674, #47166, #9946, #53462, #16211, #59737, #22457, #65988, #28764, #72250, #34987, #78510, #41216, #3942, #47432, #10217, #53724, #16481, #60005, #22731, #66259, #29033, #72512, #35262, #78777, #41478, #4215, #47704, #10490, #53980, #16733, #60276, #23000, #66516, #29293, #72778, #35521, #79040, #41734, #4485, #47974, #10756, #54249, #17009, #60544, #23262, #66783, #29555, #73044, #35773, #79293, #42002, #4747, #48239, #11028, #54527, #17276, #60807, #23529, #67050, #29829, #73314, #36038, #79563, #42262, #5020, #48503, #11297, #54790, #17550, #61079, #23809, #67318, #30089, #73573, #36298, #79828, #42539, #5292, #48776, #11571, #55053, #17819, #61354, #24079, #67581, #30349, #73849, #36555, #80092, #42803, #5564, #49040, #11832, #55316, #18073, #61618, #24333, #67852, #30607, #74123, #36821, #80353, #43075, #5836, #49311, #12093, #55588, #18344, #61878, #24605, #68107, #30870, #74387, #37080, #80622, #43341, #6103, #49562, #12371, #55854, #18611, #62136, #24869, #68383, #31138, #74647, #37335, #97, #43597, #6360, #49844, #12635, #56125, #18869, #62397, #25139, #68649, #31404, #74905, #37612, #357, #43852, #6622, #50107, #12908, #56383, #19135, #62669, #25422, #68907, #31662, #75177, #37879, #624, #44108, #6895, #50367, #13180, #56662, #19403, #62948, #25687, #69172, #31928, #75437, #38143, #888, #44372, #7144, #50648, #13448, #56946, #19692, #63212, #25955, #69436, #32189, #75687, #38404, #1165, #44632, #7412, #50909, #13723, #57206, #19955, #63487, #26227, #69710, #32448, #75963, #38673, #1429, #44914, #7665, #51162, #13968, #57472, #20219, #63754, #26499, #69960, #32716, #76232, #38946, #1692, #45177, #7952, #51435, #14228, #57736, #20489, #64025, #26752 ), + ( #70238, #32982, #76492, #39218, #1958, #45447, #8201, #51710, #14489, #58012, #20756, #64300, #27025, #70506, #33256, #76757, #39495, #2224, #45725, #8472, #51971, #14763, #58268, #21032, #64562, #27299, #70780, #33518, #77040, #39765, #2490, #46001, #8742, #52257, #15024, #58545, #21291, #64835, #27560, #71051, #33794, #77303, #40045, #2748, #46260, #9011, #52532, #15302, #58800, #21578, #65094, #27838, #71320, #34066, #77582, #40296, #3035, #46526, #9286, #52809, #15571, #59080, #21825, #65384, #28106, #71607, #34343, #77849, #40571, #3301, #46811, #9565, #53077, #15835, #59356, #22100, #65622, #28403, #71880, #34617, #78117, #40853, #3574, #47070, #9854, #53359, #16109, #59640, #22360, #65901, #28663, #72159, #34880, #78410, #41123, #3842, #47337, #10123, #53634, #16382, #59907, #22636, #66162, #28935, #72421, #35176, #78674, #41377, #4123, #47611, #10394, #53890, #16648, #60177, #22900, #66425, #29201, #72688, #35427, #78950, #41640, #4392, #47885, #10662, #54151, #16916, #60455, #23169, #66686, #29466, #72948, #35683, #79203, #41919, #4653, #48147, #10930, #54426, #17182, #60705, #23433, #66956, #29721, #73217, #35938, #79474, #42159, #4928, #48409, #11205, #54695, #17447, #60975, #23718, #67225, #29991, #73472, #36208, #79725, #42436, #5192, #48685, #11469, #54959, #17719, #61257, #23988, #67476, #30256, #73751, #36455, #80001, #42704, #5472, #48945, #11741, #55219, #17984, #61522, #24237, #67757, #30514, #74028, #36726, #80256, #42979, #5733, #49217, #11992, #55504, #18248, #61784, #24506, #68018, #30772, #74293, #36993, #80534, #43248, #6008, #49474, #12278, #55754, #18518, #62046, #24773, #68279, #31036, #74549, #37248, #80803, #43502, #6264, #49749, #12534, #56031, #18777, #62318, #25038, #68559, #31306, #74814, #37514, #262, #43766, #6536, #50011, #12815, #56288, #19041, #62566, #25326, #68815, #31574, #75085, #37785, #526, #44022, #6801, #50281, #13081, #56567, #19308, #62855, #25587, #69095, #31842, #75341, #38049, #794, #44283, #7049, #50550, #13349, #56842, #19587, #63110, #25863, #69341, #32098, #75593, #38314, #1068, #44538, #7315, #50816, #13626, #57121, #19860, #63392, #26128, #69611, #32353, #75876, #38575, #1331, #44816, #7578, #51077, #13876, #57381, #20132, #63660, #26403, #69877, #32628, #76128, #38852, #1602, #45083, #7852, #51342, #14138, #57636, #20396, #63926, #26661, #70144, #32883, #76404, #39117, #1865, #45358, #8109, #51612, #14401, #57922, #20660, #64207, #26931, #70412, #33165, #76664, #39406, #2126, #45629, #8375, #51887, #14673, #58177, #20940, #64475, #27202, #70683, #33427, #76945, #39680, #2406, #45904, #8658, #52162, #14937, #58450, #21215, #64747, #27467, #70956, #33699, #77217, #39955, #2663, #46180, #8909, #52434, #15201, #58717, #21483, #65007, #27739, #71228, #33972, #77488, #40208, #2951, #46437, #9191, #52710, #15486, #58982, #21745, #65289, #28027, #71509, #34237, #77748, #40485, #3212, #46715, #9468, #52986, #15741, #59257, #22001, #65549, #28298, #71785, #34525, #78024, #40751, #3475, #46980, #9762, #53265, #16019, #59537, #22270, #65798, #28569, #72064, #34800, #78313, #41026, #3749, #47248, #10028, #53543, #16291, #59819, #22537, #66072, #28838, #72334, #35077, #78590, #41288, #4030, #47516, #10297, #53801, #16561, #60087, #22809, #66327, #29114, #72593, #35342, #78860, #41565, #4300, #47785, #10566, #54065, #16824, #60360, #23083, #66596, #29372, #72857, #35593, #79115, #41820, #4570, #48055 ) ), + .UNSPECIFIED., .T., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 3, 4 ), + ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.0000000000000000000, 0.5000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.004629629629629629400, 0.009259259259259258700, 0.01388888888888888800, 0.01851851851851851700, 0.02314814814814814700, 0.02777777777777777600, 0.03240740740740740600, 0.03703703703703703500, 0.04166666666666666400, 0.04629629629629629400, 0.05092592592592592300, 0.05555555555555555200, 0.06018518518518518200, 0.06481481481481481100, 0.06944444444444444800, 0.07407407407407407000, 0.07870370370370370600, 0.08333333333333332900, 0.08796296296296296500, 0.09259259259259258700, 0.09722222222222222400, 0.1018518518518518500, 0.1064814814814814800, 0.1111111111111111000, 0.1157407407407407400, 0.1203703703703703600, 0.1250000000000000000, 0.1296296296296296200, 0.1342592592592592700, 0.1388888888888889000, 0.1435185185185185200, 0.1481481481481481400, 0.1527777777777777900, 0.1574074074074074100, 0.1620370370370370300, 0.1666666666666666600, 0.1712962962962963100, 0.1759259259259259300, 0.1805555555555555500, 0.1851851851851851700, 0.1898148148148148300, 0.1944444444444444500, 0.1990740740740740700, 0.2037037037037036900, 0.2083333333333333400, 0.2129629629629629700, 0.2175925925925925900, 0.2222222222222222100, 0.2268518518518518600, 0.2314814814814814800, 0.2361111111111111000, 0.2407407407407407300, 0.2453703703703703800, 0.2500000000000000000, 0.2546296296296296500, 0.2592592592592592400, 0.2638888888888889000, 0.2685185185185185500, 0.2731481481481481400, 0.2777777777777777900, 0.2824074074074073800, 0.2870370370370370300, 0.2916666666666666900, 0.2962962962962962800, 0.3009259259259259300, 0.3055555555555555800, 0.3101851851851851700, 0.3148148148148148300, 0.3194444444444444200, 0.3240740740740740700, 0.3287037037037037200, 0.3333333333333333100, 0.3379629629629629700, 0.3425925925925926200, 0.3472222222222222100, 0.3518518518518518600, 0.3564814814814814500, 0.3611111111111111000, 0.3657407407407407600, 0.3703703703703703500, 0.3750000000000000000, 0.3796296296296296500, 0.3842592592592592400, 0.3888888888888889000, 0.3935185185185185500, 0.3981481481481481400, 0.4027777777777777900, 0.4074074074074073800, 0.4120370370370370300, 0.4166666666666666900, 0.4212962962962962800, 0.4259259259259259300, 0.4305555555555555800, 0.4351851851851851700, 0.4398148148148148300, 0.4444444444444444200, 0.4490740740740740700, 0.4537037037037037200, 0.4583333333333333100, 0.4629629629629629700, 0.4675925925925926200, 0.4722222222222222100, 0.4768518518518518600, 0.4814814814814814500, 0.4861111111111111000, 0.4907407407407407600, 0.4953703703703703500, 0.5000000000000000000, 0.5046296296296296500, 0.5092592592592593000, 0.5138888888888888400, 0.5185185185185184900, 0.5231481481481481400, 0.5277777777777777900, 0.5324074074074074400, 0.5370370370370370900, 0.5416666666666666300, 0.5462962962962962800, 0.5509259259259259300, 0.5555555555555555800, 0.5601851851851852300, 0.5648148148148147700, 0.5694444444444444200, 0.5740740740740740700, 0.5787037037037037200, 0.5833333333333333700, 0.5879629629629629100, 0.5925925925925925600, 0.5972222222222222100, 0.6018518518518518600, 0.6064814814814815100, 0.6111111111111111600, 0.6157407407407407000, 0.6203703703703703500, 0.6250000000000000000, 0.6296296296296296500, 0.6342592592592593000, 0.6388888888888888400, 0.6435185185185184900, 0.6481481481481481400, 0.6527777777777777900, 0.6574074074074074400, 0.6620370370370370900, 0.6666666666666666300, 0.6712962962962962800, 0.6759259259259259300, 0.6805555555555555800, 0.6851851851851852300, 0.6898148148148147700, 0.6944444444444444200, 0.6990740740740740700, 0.7037037037037037200, 0.7083333333333333700, 0.7129629629629629100, 0.7175925925925925600, 0.7222222222222222100, 0.7268518518518518600, 0.7314814814814815100, 0.7361111111111111600, 0.7407407407407407000, 0.7453703703703703500, 0.7500000000000000000, 0.7546296296296296500, 0.7592592592592593000, 0.7638888888888888400, 0.7685185185185184900, 0.7731481481481481400, 0.7777777777777777900, 0.7824074074074074400, 0.7870370370370370900, 0.7916666666666666300, 0.7962962962962962800, 0.8009259259259259300, 0.8055555555555555800, 0.8101851851851852300, 0.8148148148148147700, 0.8194444444444444200, 0.8240740740740740700, 0.8287037037037037200, 0.8333333333333333700, 0.8379629629629629100, 0.8425925925925925600, 0.8472222222222222100, 0.8518518518518518600, 0.8564814814814815100, 0.8611111111111111600, 0.8657407407407407000, 0.8703703703703703500, 0.8750000000000000000, 0.8796296296296296500, 0.8842592592592593000, 0.8888888888888888400, 0.8935185185185184900, 0.8981481481481481400, 0.9027777777777777900, 0.9074074074074074400, 0.9120370370370370900, 0.9166666666666666300, 0.9212962962962962800, 0.9259259259259259300, 0.9305555555555555800, 0.9351851851851852300, 0.9398148148148147700, 0.9444444444444444200, 0.9490740740740740700, 0.9537037037037037200, 0.9583333333333333700, 0.9629629629629629100, 0.9675925925925925600, 0.9722222222222222100, 0.9768518518518518600, 0.9814814814814815100, 0.9861111111111111600, 0.9907407407407407000, 0.9953703703703703500, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700, 0.3219752754296894600, 0.3333333333333333700), + ( 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12849 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 51.43945992495517300, -28.34042301926893600 ) ) ; +#12850 = ADVANCED_FACE ( 'NONE', ( #11020 ), #25633, .T. ) ; +#12851 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12852 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 69.41684396980637900, -28.70555803803024400 ) ) ; +#12853 = AXIS2_PLACEMENT_3D ( 'NONE', #44059, #6835, #50317 ) ; +#12854 = EDGE_CURVE ( 'NONE', #43963, #13573, #42129, .T. ) ; +#12855 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 39.35339758437810100, -28.20555803802995200 ) ) ; +#12856 = EDGE_CURVE ( 'NONE', #71478, #26405, #25780, .T. ) ; +#12857 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#12858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2101, #76632, #70378, #8340 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820729589800E-007, 0.0005869288236378069500 ), + .UNSPECIFIED. ) ; +#12859 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 33.17681279774500100, -28.70555803802996700 ) ) ; +#12860 = EDGE_CURVE ( 'NONE', #50435, #40818, #11306, .T. ) ; +#12861 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12862 = AXIS2_PLACEMENT_3D ( 'NONE', #68402, #31166, #74672 ) ; +#12863 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#12864 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#12865 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#12866 = ORIENTED_EDGE ( 'NONE', *, *, #58562, .F. ) ; +#12867 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489603300, 49.65930907398613000, -28.35186440610855000 ) ) ; +#12868 = VERTEX_POINT ( 'NONE', #37299 ) ; +#12869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12870 = AXIS2_PLACEMENT_3D ( 'NONE', #38966, #1709, #45208 ) ; +#12871 = AXIS2_PLACEMENT_3D ( 'NONE', #60025, #47447, #78529 ) ; +#12872 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 65.67652461702000700, -28.70555803802997700 ) ) ; +#12873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12874 = ADVANCED_FACE ( 'NONE', ( #75245 ), #56736, .T. ) ; +#12875 = CIRCLE ( 'NONE', #29920, 10.00000000000009400 ) ; +#12876 = VERTEX_POINT ( 'NONE', #6329 ) ; +#12877 = ORIENTED_EDGE ( 'NONE', *, *, #64817, .T. ) ; +#12878 = VERTEX_POINT ( 'NONE', #12593 ) ; +#12879 = CIRCLE ( 'NONE', #5705, 10.00000000000009600 ) ; +#12880 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534572000, 18.99920551340398600, -28.70555803802992800 ) ) ; +#12881 = ORIENTED_EDGE ( 'NONE', *, *, #56303, .T. ) ; +#12882 = EDGE_LOOP ( 'NONE', ( #39800, #21485, #48232, #61364 ) ) ; +#12883 = ORIENTED_EDGE ( 'NONE', *, *, #79220, .F. ) ; +#12884 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 36.16666666666667100, 6.794441961969992500 ) ) ; +#12885 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12886 = AXIS2_PLACEMENT_3D ( 'NONE', #15273, #58779, #21539 ) ; +#12887 = EDGE_CURVE ( 'NONE', #49333, #10618, #77606, .T. ) ; +#12888 = CIRCLE ( 'NONE', #932, 10.00000000000009400 ) ; +#12889 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73067, #17039, #35790, #79317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241144200, 0.0005195704752302102300 ), + .UNSPECIFIED. ) ; +#12890 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#12891 = ORIENTED_EDGE ( 'NONE', *, *, #60206, .T. ) ; +#12892 = ORIENTED_EDGE ( 'NONE', *, *, #71458, .T. ) ; +#12893 = FACE_OUTER_BOUND ( 'NONE', #71166, .T. ) ; +#12894 = EDGE_LOOP ( 'NONE', ( #40083, #31521, #7644, #59958, #56020, #24345, #63249 ) ) ; +#12895 = EDGE_CURVE ( 'NONE', #33514, #28113, #72386, .T. ) ; +#12896 = ORIENTED_EDGE ( 'NONE', *, *, #47597, .T. ) ; +#12897 = AXIS2_PLACEMENT_3D ( 'NONE', #33147, #76648, #39382 ) ; +#12898 = VERTEX_POINT ( 'NONE', #56088 ) ; +#12899 = ORIENTED_EDGE ( 'NONE', *, *, #27151, .F. ) ; +#12900 = CONICAL_SURFACE ( 'NONE', #52795, 10.50000000000009600, 0.7853981633974500600 ) ; +#12901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12902 = EDGE_LOOP ( 'NONE', ( #72207, #43030, #23028 ) ) ; +#12903 = CONICAL_SURFACE ( 'NONE', #56003, 10.50000000000009600, 0.7853981633974500600 ) ; +#12904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12906 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662741965900, 15.93535825203905400, -28.53896444442201700 ) ) ; +#12907 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#12908 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 7.500000000000000900, -9.258116921287651700 ) ) ; +#12909 = ORIENTED_EDGE ( 'NONE', *, *, #35717, .F. ) ; +#12910 = AXIS2_PLACEMENT_3D ( 'NONE', #71092, #77355, #27600 ) ; +#12911 = CARTESIAN_POINT ( 'NONE', ( 10.04027359854960500, 28.72437813624630100, -28.30310527599299400 ) ) ; +#12912 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12913 = CIRCLE ( 'NONE', #28439, 10.50000000000009600 ) ; +#12914 = VERTEX_POINT ( 'NONE', #37567 ) ; +#12915 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#12916 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344316200, 28.42298334620755500, -28.20555803802994900 ) ) ; +#12917 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12918 = AXIS2_PLACEMENT_3D ( 'NONE', #9316, #52839, #15597 ) ; +#12919 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658264100, 80.15151454780964000, -28.67627428870436600 ) ) ; +#12920 = ADVANCED_FACE ( 'NONE', ( #51863 ), #7088, .T. ) ; +#12921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12922 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#12923 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 9.746602415621900700, -28.20555803802992800 ) ) ; +#12924 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#12925 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 42.00000000000001400, -1.205558038030002800 ) ) ; +#12926 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12927 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#12928 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116476000, 39.20564881207762700, -28.41114655922298800 ) ) ; +#12929 = ORIENTED_EDGE ( 'NONE', *, *, #22580, .F. ) ; +#12930 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999958600, 81.96823913367188700, -28.70555803803030800 ) ) ; +#12931 = VERTEX_POINT ( 'NONE', #25382 ) ; +#12932 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#12933 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000049400, 101.6000000000000100, -19.27500327626725300 ) ) ; +#12934 = ADVANCED_FACE ( 'NONE', ( #29544 ), #54782, .T. ) ; +#12935 = CARTESIAN_POINT ( 'NONE', ( 16.32232026313008800, 90.10230989102886700, -28.61774594593744000 ) ) ; +#12936 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999954900, 81.43250300240198700, -28.20555803803047800 ) ) ; +#12937 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12938 = ORIENTED_EDGE ( 'NONE', *, *, #60630, .F. ) ; +#12939 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 80.34267608797600200, -28.20555803802997700 ) ) ; +#12940 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701400, 25.48096581827318700, -28.69431509262337700 ) ) ; +#12941 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2689, #58481, #8939, #52456 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215355289100E-007, 0.0007606633682806828200 ), + .UNSPECIFIED. ) ; +#12942 = CONICAL_SURFACE ( 'NONE', #52728, 10.00000000000009400, 0.7853981633974447300 ) ; +#12943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12944 = ORIENTED_EDGE ( 'NONE', *, *, #49838, .T. ) ; +#12945 = CARTESIAN_POINT ( 'NONE', ( -2.769188246343333000, 80.94994472024596600, -28.43636979168690000 ) ) ; +#12946 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950496500, 49.19228657120673600, -28.53891855579989600 ) ) ; +#12947 = FACE_OUTER_BOUND ( 'NONE', #69017, .T. ) ; +#12948 = ORIENTED_EDGE ( 'NONE', *, *, #53687, .F. ) ; +#12949 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#12950 = ADVANCED_FACE ( 'NONE', ( #12978 ), #21727, .T. ) ; +#12951 = ADVANCED_FACE ( 'NONE', ( #73307 ), #69381, .T. ) ; +#12952 = CIRCLE ( 'NONE', #26741, 10.00000000000009400 ) ; +#12953 = EDGE_CURVE ( 'NONE', #49674, #31088, #5156, .T. ) ; +#12954 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328932000, 49.36201280598331200, -28.29447340919124800 ) ) ; +#12956 = VERTEX_POINT ( 'NONE', #31892 ) ; +#12955 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725212400, 14.04999999999952800, -28.20555803803025800 ) ) ; +#12957 = VERTEX_POINT ( 'NONE', #19366 ) ; +#12958 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12959 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818041300, 51.65075715145332700, -28.20555803803005900 ) ) ; +#12960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12961 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#12962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12963 = EDGE_CURVE ( 'NONE', #39400, #38688, #63176, .T. ) ; +#12964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14857, #52078, #64658, #27389 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213599292500E-007, 0.0008724366121414556700 ), + .UNSPECIFIED. ) ; +#12965 = CARTESIAN_POINT ( 'NONE', ( 2.279233496941982300, 80.09951448976249800, -28.63282631410043800 ) ) ; +#12966 = CONICAL_SURFACE ( 'NONE', #28038, 10.50000000000009800, 0.7853981633974518300 ) ; +#12967 = ADVANCED_FACE ( 'NONE', ( #23676 ), #19761, .T. ) ; +#12968 = EDGE_CURVE ( 'NONE', #62491, #66366, #36289, .T. ) ; +#12969 = ORIENTED_EDGE ( 'NONE', *, *, #51258, .F. ) ; +#12970 = AXIS2_PLACEMENT_3D ( 'NONE', #42144, #54672, #79440 ) ; +#12971 = FACE_OUTER_BOUND ( 'NONE', #57123, .T. ) ; +#12972 = ORIENTED_EDGE ( 'NONE', *, *, #76060, .F. ) ; +#12973 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109151000, 18.47143078992693400, -28.37063977681179200 ) ) ; +#12974 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 48.33333333333333600, 4.294441961970000500 ) ) ; +#12975 = VERTEX_POINT ( 'NONE', #69399 ) ; +#12976 = ORIENTED_EDGE ( 'NONE', *, *, #49365, .T. ) ; +#12977 = ORIENTED_EDGE ( 'NONE', *, *, #67264, .T. ) ; +#12978 = FACE_OUTER_BOUND ( 'NONE', #47929, .T. ) ; +#12979 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 13.50000000000000900, -4.865812075874393000 ) ) ; +#12980 = AXIS2_PLACEMENT_3D ( 'NONE', #34374, #77889, #40611 ) ; +#12981 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000471200, 18.34510448120795800, -28.37193179497708700 ) ) ; +#12982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57850, #63857, #1792, #20597 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524735141700E-007, 0.0007303749718165316500 ), + .UNSPECIFIED. ) ; +#12983 = EDGE_CURVE ( 'NONE', #11257, #32073, #48657, .T. ) ; +#12984 = EDGE_CURVE ( 'NONE', #27548, #45369, #34230, .T. ) ; +#12985 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488088700, 71.99560977511647800, -28.70555803803014400 ) ) ; +#12986 = VERTEX_POINT ( 'NONE', #19922 ) ; +#12987 = AXIS2_PLACEMENT_3D ( 'NONE', #45380, #57937, #1884 ) ; +#12988 = ORIENTED_EDGE ( 'NONE', *, *, #40572, .F. ) ; +#12989 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#12990 = ORIENTED_EDGE ( 'NONE', *, *, #7913, .F. ) ; +#12991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12992 = CIRCLE ( 'NONE', #23223, 10.00000000000009600 ) ; +#12993 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#12994 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 15.83333333333335500, 9.794441961969999600 ) ) ; +#12995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12996 = AXIS2_PLACEMENT_3D ( 'NONE', #50261, #50524, #44261 ) ; +#12997 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12998 = EDGE_CURVE ( 'NONE', #64808, #40461, #71336, .T. ) ; +#12999 = AXIS2_PLACEMENT_3D ( 'NONE', #49956, #62518, #12481 ) ; +#13000 = AXIS2_PLACEMENT_3D ( 'NONE', #33359, #76875, #39608 ) ; +#13001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13002 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 41.67701665379221500, -28.20555803802997400 ) ) ; +#13003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13004 = CARTESIAN_POINT ( 'NONE', ( 16.32232026313008800, 90.10230989102886700, -28.61774594593744000 ) ) ; +#13005 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725652400, 26.43535825203924700, -28.53896444442197500 ) ) ; +#13006 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153560700, 70.79999999999985500, -28.55171188418395900 ) ) ; +#13007 = CARTESIAN_POINT ( 'NONE', ( -1.783306465195879000, 70.79999999999998300, -28.32841359973437900 ) ) ; +#13008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13009 = FACE_OUTER_BOUND ( 'NONE', #4105, .T. ) ; +#13010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13011 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488106500, 51.99560977511662700, -28.70555803802997700 ) ) ; +#13012 = AXIS2_PLACEMENT_3D ( 'NONE', #69978, #32725, #76246 ) ; +#13013 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 20.52858243452105900, -28.70555803802995200 ) ) ; +#13014 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 54.13556610137281700, -28.54207364681943600 ) ) ; +#13015 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#13017 = ORIENTED_EDGE ( 'NONE', *, *, #60734, .T. ) ; +#13016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13019 = VERTEX_POINT ( 'NONE', #7634 ) ; +#13020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4134, #41383, #47619, #10403 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405673024806500E-007, 0.0007670610367946126900 ), + .UNSPECIFIED. ) ; +#13021 = ADVANCED_FACE ( 'NONE', ( #9025 ), #34356, .F. ) ; +#13022 = PLANE ( 'NONE', #80689 ) ; +#13024 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13023 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#13025 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 80.79999999999998300, -28.55171188418376700 ) ) ; +#13026 = CONICAL_SURFACE ( 'NONE', #49011, 10.00000000000009200, 0.7853981633974447300 ) ; +#13027 = AXIS2_PLACEMENT_3D ( 'NONE', #29640, #35867, #10856 ) ; +#13028 = EDGE_LOOP ( 'NONE', ( #61457, #72820, #44867, #41729 ) ) ; +#13029 = FACE_OUTER_BOUND ( 'NONE', #11109, .T. ) ; +#13030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13031 = EDGE_LOOP ( 'NONE', ( #35964, #73123, #51165 ) ) ; +#13032 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 19.33333333333334600, -8.133761268305512700 ) ) ; +#13033 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#13034 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.86203212531320300, -28.38801640354855800 ) ) ; +#13035 = EDGE_LOOP ( 'NONE', ( #15776, #19617, #57272, #78187, #38196 ) ) ; +#13036 = FACE_OUTER_BOUND ( 'NONE', #73224, .T. ) ; +#13037 = EDGE_LOOP ( 'NONE', ( #34031, #67792, #78922, #39745, #10206, #3061, #34163 ) ) ; +#13038 = ORIENTED_EDGE ( 'NONE', *, *, #58695, .T. ) ; +#13039 = VERTEX_POINT ( 'NONE', #38910 ) ; +#13040 = ADVANCED_FACE ( 'NONE', ( #52825 ), #1237, .T. ) ; +#13041 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906782900, 31.17036336027456800, -28.27338767626450900 ) ) ; +#13042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13044 = EDGE_CURVE ( 'NONE', #59571, #80238, #19778, .T. ) ; +#13045 = LINE ( 'NONE', #3487, #29609 ) ; +#13046 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13047 = VERTEX_POINT ( 'NONE', #7908 ) ; +#13048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13050 = CONICAL_SURFACE ( 'NONE', #15937, 10.00000000000009200, 0.7853981633974447300 ) ; +#13051 = AXIS2_PLACEMENT_3D ( 'NONE', #26265, #63514, #1460 ) ; +#13052 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807103300, 64.79999999999975600, -28.70555803803014400 ) ) ; +#13053 = ORIENTED_EDGE ( 'NONE', *, *, #7776, .T. ) ; +#13054 = ADVANCED_FACE ( 'NONE', ( #17813 ), #48908, .T. ) ; +#13055 = ORIENTED_EDGE ( 'NONE', *, *, #3651, .F. ) ; +#13056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13057 = ORIENTED_EDGE ( 'NONE', *, *, #60066, .T. ) ; +#13058 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#13059 = ORIENTED_EDGE ( 'NONE', *, *, #20112, .T. ) ; +#13060 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 80.13716795162659400, -28.48697406221667400 ) ) ; +#13061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13062 = CIRCLE ( 'NONE', #17899, 10.00000000000009400 ) ; +#13063 = VERTEX_POINT ( 'NONE', #51669 ) ; +#13064 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76912, #58147, #2362, #45875 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885322300 ), + .UNSPECIFIED. ) ; +#13065 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13066 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#13067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13068 = ADVANCED_FACE ( 'NONE', ( #38219 ), #15849, .F. ) ; +#13069 = ORIENTED_EDGE ( 'NONE', *, *, #25946, .F. ) ; +#13070 = EDGE_CURVE ( 'NONE', #9161, #39861, #5305, .T. ) ; +#13071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13072 = ORIENTED_EDGE ( 'NONE', *, *, #65856, .F. ) ; +#13073 = FACE_OUTER_BOUND ( 'NONE', #50655, .T. ) ; +#13075 = EDGE_CURVE ( 'NONE', #62283, #39609, #71635, .T. ) ; +#13074 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10887, #48101, #60671, #23392 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183144400, 0.005168056621191974500 ), + .UNSPECIFIED. ) ; +#13076 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13077 = ADVANCED_FACE ( 'NONE', ( #40187 ), #63567, .F. ) ; +#13078 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 62.99999999999999300, -1.205558038030002800 ) ) ; +#13079 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#13080 = EDGE_CURVE ( 'NONE', #20052, #4061, #80086, .T. ) ; +#13081 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 28.00000000000001100, -1.205558038030005300 ) ) ; +#13082 = EDGE_CURVE ( 'NONE', #6862, #1090, #57170, .T. ) ; +#13083 = AXIS2_PLACEMENT_3D ( 'NONE', #30857, #74375, #37072 ) ; +#13084 = CARTESIAN_POINT ( 'NONE', ( -16.52200773131491100, 30.97693523592504400, -28.54785533206975500 ) ) ; +#13085 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#13086 = FACE_OUTER_BOUND ( 'NONE', #9666, .T. ) ; +#13087 = CARTESIAN_POINT ( 'NONE', ( -10.97683272551938000, 49.58088969930749100, -28.30223898143228900 ) ) ; +#13088 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 42.18315603019281200, -28.70555803802999500 ) ) ; +#13089 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 65.33333333333334300, -6.705558038030005700 ) ) ; +#13090 = CARTESIAN_POINT ( 'NONE', ( -2.530136888809774400, 9.146957350529797600, -28.66910751791843700 ) ) ; +#13091 = ORIENTED_EDGE ( 'NONE', *, *, #12612, .F. ) ; +#13092 = AXIS2_PLACEMENT_3D ( 'NONE', #26784, #70266, #33022 ) ; +#13094 = ORIENTED_EDGE ( 'NONE', *, *, #19003, .T. ) ; +#13093 = EDGE_CURVE ( 'NONE', #54750, #49684, #42684, .T. ) ; +#13095 = EDGE_CURVE ( 'NONE', #39407, #52008, #50855, .T. ) ; +#13096 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534574300, 30.10079448659600100, -28.70555803802995200 ) ) ; +#13097 = EDGE_CURVE ( 'NONE', #34010, #44346, #28288, .T. ) ; +#13098 = ORIENTED_EDGE ( 'NONE', *, *, #2679, .F. ) ; +#13099 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13100 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#13101 = FACE_OUTER_BOUND ( 'NONE', #696, .T. ) ; +#13102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13103 = ORIENTED_EDGE ( 'NONE', *, *, #55335, .F. ) ; +#13104 = CONICAL_SURFACE ( 'NONE', #28412, 10.00000000000009200, 0.7853981633974447300 ) ; +#13105 = ORIENTED_EDGE ( 'NONE', *, *, #57758, .F. ) ; +#13106 = AXIS2_PLACEMENT_3D ( 'NONE', #21615, #2806, #65142 ) ; +#13107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13108 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 71.43945992495517300, -28.34042301926893600 ) ) ; +#13109 = FACE_OUTER_BOUND ( 'NONE', #77513, .T. ) ; +#13110 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#13111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13112 = CONICAL_SURFACE ( 'NONE', #57524, 10.50000000000009600, 0.7853981633974500600 ) ; +#13113 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#13114 = ORIENTED_EDGE ( 'NONE', *, *, #16737, .F. ) ; +#13115 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#13116 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344325100, 41.67701665379241400, -28.20555803802997400 ) ) ; +#13117 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .T. ) ; +#13118 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703200, 25.48096581827319100, -28.69431509262337300 ) ) ; +#13119 = EDGE_CURVE ( 'NONE', #70193, #32622, #32398, .T. ) ; +#13121 = EDGE_LOOP ( 'NONE', ( #24864, #27349 ) ) ; +#13120 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147100, 71.52858243452072900, -28.70555803803030800 ) ) ; +#13122 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13123 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528500, 35.36787096422378300, -28.37244029424745100 ) ) ; +#13124 = AXIS2_PLACEMENT_3D ( 'NONE', #39332, #2066, #45558 ) ; +#13125 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 70.34267608797598800, -28.20555803802997700 ) ) ; +#13126 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13127 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8079, #1814, #39085, #14363 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402675324091676900E-007, 0.0002930379123883719500 ), + .UNSPECIFIED. ) ; +#13128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13129 = CONICAL_SURFACE ( 'NONE', #22156, 10.50000000000009800, 0.7853981633974518300 ) ; +#13130 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189800, 41.86172549728279100, -28.47230003642276600 ) ) ; +#13131 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#13132 = EDGE_LOOP ( 'NONE', ( #77721, #59153, #49224 ) ) ; +#13133 = CIRCLE ( 'NONE', #37235, 10.00000000000009200 ) ; +#13134 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 68.00000000000000000, -1.205558038030005300 ) ) ; +#13135 = VERTEX_POINT ( 'NONE', #58772 ) ; +#13136 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823703100, 42.40456253568395100, -28.61277292027075700 ) ) ; +#13137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13138 = ORIENTED_EDGE ( 'NONE', *, *, #50771, .F. ) ; +#13139 = EDGE_LOOP ( 'NONE', ( #63932, #66197, #77957 ) ) ; +#13140 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650751800, 29.20543520232828200, -28.70555803802994200 ) ) ; +#13141 = ORIENTED_EDGE ( 'NONE', *, *, #30832, .F. ) ; +#13142 = VERTEX_POINT ( 'NONE', #27797 ) ; +#13143 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 59.97246552159111800, -28.38801640354855500 ) ) ; +#13144 = EDGE_LOOP ( 'NONE', ( #80538, #67975, #61514, #66198 ) ) ; +#13145 = FACE_OUTER_BOUND ( 'NONE', #56325, .T. ) ; +#13146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13148 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465444000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#13149 = AXIS2_PLACEMENT_3D ( 'NONE', #21709, #40446, #27980 ) ; +#13150 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 73.65857157145693200, -28.20555803802997700 ) ) ; +#13151 = ORIENTED_EDGE ( 'NONE', *, *, #49486, .T. ) ; +#13152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13153 = CARTESIAN_POINT ( 'NONE', ( 9.254657264815444200, 31.00380841767820800, -28.64142799534456100 ) ) ; +#13154 = ORIENTED_EDGE ( 'NONE', *, *, #57860, .T. ) ; +#13155 = ORIENTED_EDGE ( 'NONE', *, *, #63641, .T. ) ; +#13156 = AXIS2_PLACEMENT_3D ( 'NONE', #33751, #39998, #8700 ) ; +#13157 = ORIENTED_EDGE ( 'NONE', *, *, #9383, .F. ) ; +#13158 = ADVANCED_FACE ( 'NONE', ( #65522 ), #61609, .T. ) ; +#13159 = CONICAL_SURFACE ( 'NONE', #9003, 10.50000000000009600, 0.7853981633974518300 ) ; +#13160 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.47246552159110400, -28.38801640354855500 ) ) ; +#13161 = AXIS2_PLACEMENT_3D ( 'NONE', #4841, #48337, #11121 ) ; +#13162 = ADVANCED_FACE ( 'NONE', ( #67448 ), #28551, .F. ) ; +#13163 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 34.00000000000000700, -9.205558038030005700 ) ) ; +#13164 = CARTESIAN_POINT ( 'NONE', ( 15.42159809000307500, 49.19142961419052500, -28.69910740970346200 ) ) ; +#13166 = AXIS2_PLACEMENT_3D ( 'NONE', #69207, #19440, #31955 ) ; +#13165 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5097, #79372, #36368, #79903 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815616938400E-007, 0.0007763385940577136200 ), + .UNSPECIFIED. ) ; +#13167 = CARTESIAN_POINT ( 'NONE', ( -16.21156249007623600, 9.099570058195492800, -28.63724980546501800 ) ) ; +#13168 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284933200, 28.77966528189953300, -28.30868034705249100 ) ) ; +#13169 = ADVANCED_FACE ( 'NONE', ( #78135 ), #76169, .T. ) ; +#13170 = AXIS2_PLACEMENT_3D ( 'NONE', #6055, #43550, #43285 ) ; +#13171 = CIRCLE ( 'NONE', #4303, 10.00000000000009600 ) ; +#13172 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 70.16349705304867300, -28.30782889147482400 ) ) ; +#13173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26066, #63337, #32305, #75807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820745897300E-007, 0.0005869288236378120500 ), + .UNSPECIFIED. ) ; +#13174 = ORIENTED_EDGE ( 'NONE', *, *, #43478, .F. ) ; +#13175 = FACE_OUTER_BOUND ( 'NONE', #70951, .T. ) ; +#13176 = ORIENTED_EDGE ( 'NONE', *, *, #53094, .F. ) ; +#13177 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890813100, 71.10236277681490000, -28.32100408376073700 ) ) ; +#13178 = CARTESIAN_POINT ( 'NONE', ( -10.75693756550920100, 71.43482212736796600, -28.29548618595819700 ) ) ; +#13179 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528182800, 28.63131911501876900, -28.51286550264508100 ) ) ; +#13180 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 5.333333333333341900, 8.320721403598817300 ) ) ; +#13181 = CONICAL_SURFACE ( 'NONE', #70852, 10.50000000000009900, 0.7853981633974518300 ) ; +#13182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13183 = CONICAL_SURFACE ( 'NONE', #20501, 10.50000000000009600, 0.7853981633974500600 ) ; +#13185 = EDGE_CURVE ( 'NONE', #62856, #43592, #13797, .T. ) ; +#13184 = ORIENTED_EDGE ( 'NONE', *, *, #68243, .T. ) ; +#13186 = EDGE_CURVE ( 'NONE', #20496, #21831, #80103, .T. ) ; +#13187 = CONICAL_SURFACE ( 'NONE', #46331, 10.00000000000009600, 0.7853981633974447300 ) ; +#13188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13189 = ORIENTED_EDGE ( 'NONE', *, *, #52598, .F. ) ; +#13190 = CARTESIAN_POINT ( 'NONE', ( 17.20300227421546400, 5.593994579463943900, -27.68259149659811400 ) ) ; +#13191 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13192 = EDGE_LOOP ( 'NONE', ( #16403, #26985, #40020, #32035 ) ) ; +#13193 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#13194 = EDGE_CURVE ( 'NONE', #23233, #78459, #3191, .T. ) ; +#13195 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#13196 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53279, #28578, #34814, #78324 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698916766500E-007, 0.0008724363063899861700 ), + .UNSPECIFIED. ) ; +#13197 = CIRCLE ( 'NONE', #59814, 10.50000000000009600 ) ; +#13198 = EDGE_CURVE ( 'NONE', #30084, #45798, #11962, .T. ) ; +#13200 = CIRCLE ( 'NONE', #76828, 10.00000000000009200 ) ; +#13199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13201 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473003000, 60.01262610361133200, -28.29936525552463100 ) ) ; +#13202 = ORIENTED_EDGE ( 'NONE', *, *, #59103, .F. ) ; +#13203 = EDGE_CURVE ( 'NONE', #78197, #51218, #65662, .T. ) ; +#13204 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 39.83333333333335000, -2.545304000185615800 ) ) ; +#13205 = EDGE_CURVE ( 'NONE', #22705, #70364, #30475, .T. ) ; +#13206 = VERTEX_POINT ( 'NONE', #10082 ) ; +#13207 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701863500, 55.79999999999999000, -28.70555803802997700 ) ) ; +#13208 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 29.19949493661176000, -28.70555803802994200 ) ) ; +#13209 = ORIENTED_EDGE ( 'NONE', *, *, #35792, .F. ) ; +#13210 = ORIENTED_EDGE ( 'NONE', *, *, #57286, .T. ) ; +#13211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13212 = ORIENTED_EDGE ( 'NONE', *, *, #12837, .F. ) ; +#13213 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195927700, 47.44142842854297000, -28.37229765499281000 ) ) ; +#13214 = CARTESIAN_POINT ( 'NONE', ( 23.99445488811682700, 96.09722744405777900, -23.11282986159907800 ) ) ; +#13215 = FACE_OUTER_BOUND ( 'NONE', #47568, .T. ) ; +#13216 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001000, 39.53085164125334900, -28.45573375118225800 ) ) ; +#13218 = ORIENTED_EDGE ( 'NONE', *, *, #21535, .F. ) ; +#13217 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.30277574221146600, -28.32715733700507200 ) ) ; +#13219 = AXIS2_PLACEMENT_3D ( 'NONE', #31436, #74947, #37644 ) ; +#13220 = CARTESIAN_POINT ( 'NONE', ( 11.72003132426844200, 93.69934232704446200, -28.49690748628297900 ) ) ; +#13221 = EDGE_CURVE ( 'NONE', #55468, #61855, #51120, .T. ) ; +#13222 = EDGE_CURVE ( 'NONE', #5802, #52786, #36706, .T. ) ; +#13223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13224 = EDGE_CURVE ( 'NONE', #43689, #29714, #22261, .T. ) ; +#13225 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529600, 45.54999999999999700, -28.20555803802996700 ) ) ; +#13226 = FACE_OUTER_BOUND ( 'NONE', #5037, .T. ) ; +#13227 = CARTESIAN_POINT ( 'NONE', ( 9.254548258615008300, 49.59617684379258400, -28.64146614751471300 ) ) ; +#13228 = CARTESIAN_POINT ( 'NONE', ( -10.98574357684217700, 81.58004100757904100, -28.24987021275288900 ) ) ; +#13229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13230 = ORIENTED_EDGE ( 'NONE', *, *, #62812, .T. ) ; +#13231 = FACE_OUTER_BOUND ( 'NONE', #7907, .T. ) ; +#13232 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#13233 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#13234 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#13235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13236 = AXIS2_PLACEMENT_3D ( 'NONE', #77450, #40179, #2911 ) ; +#13237 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13239 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#13240 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#13241 = ADVANCED_FACE ( 'NONE', ( #46959 ), #74263, .T. ) ; +#13242 = CONICAL_SURFACE ( 'NONE', #35549, 10.50000000000009600, 0.7853981633974500600 ) ; +#13243 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 46.16666666666667100, -4.152999154772358800 ) ) ; +#13244 = FACE_OUTER_BOUND ( 'NONE', #58370, .T. ) ; +#13245 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52517, #8990, #65085, #27826 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073965018400, 0.0005839769583133804100 ), + .UNSPECIFIED. ) ; +#13246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13247 = ORIENTED_EDGE ( 'NONE', *, *, #45707, .F. ) ; +#13248 = ADVANCED_FACE ( 'NONE', ( #59655 ), #41138, .F. ) ; +#13249 = CIRCLE ( 'NONE', #2997, 10.00000000000009600 ) ; +#13250 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 11.33333333333334600, 1.294441961969997200 ) ) ; +#13251 = AXIS2_PLACEMENT_3D ( 'NONE', #39002, #45244, #76277 ) ; +#13252 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#13253 = ORIENTED_EDGE ( 'NONE', *, *, #11188, .F. ) ; +#13254 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13255 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13256 = FACE_OUTER_BOUND ( 'NONE', #78493, .T. ) ; +#13257 = FACE_OUTER_BOUND ( 'NONE', #3414, .T. ) ; +#13258 = ORIENTED_EDGE ( 'NONE', *, *, #21890, .F. ) ; +#13259 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 61.96823913367206400, -28.70555803802997700 ) ) ; +#13260 = EDGE_CURVE ( 'NONE', #29936, #19770, #7763, .T. ) ; +#13261 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567155000, 30.74660241562189700, -28.20555803802995200 ) ) ; +#13262 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 13.66666666666667500, -10.73183747965883100 ) ) ; +#13263 = CONICAL_SURFACE ( 'NONE', #50984, 10.50000000000009600, 0.7853981633974500600 ) ; +#13264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13265 = AXIS2_PLACEMENT_3D ( 'NONE', #43820, #6584, #50066 ) ; +#13266 = EDGE_LOOP ( 'NONE', ( #63203, #61197, #974, #10433, #47890, #15454, #13454 ) ) ; +#13267 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965677300, 17.92298334620755900, -28.20555803803042500 ) ) ; +#13268 = ORIENTED_EDGE ( 'NONE', *, *, #59441, .T. ) ; +#13269 = CARTESIAN_POINT ( 'NONE', ( 8.481939010155344200E-015, 36.46443389862715600, -28.54207364681941100 ) ) ; +#13270 = ADVANCED_FACE ( 'NONE', ( #13912 ), #60408, .T. ) ; +#13271 = FACE_OUTER_BOUND ( 'NONE', #28355, .T. ) ; +#13272 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430900, 20.67701665379241000, -28.20555803802994500 ) ) ; +#13273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13274 = CONICAL_SURFACE ( 'NONE', #14759, 10.50000000000009600, 0.7853981633974500600 ) ; +#13275 = ORIENTED_EDGE ( 'NONE', *, *, #49253, .F. ) ; +#13276 = AXIS2_PLACEMENT_3D ( 'NONE', #38247, #1005, #44486 ) ; +#13277 = CARTESIAN_POINT ( 'NONE', ( 15.90489981842041100, 93.40985775483721900, -28.54097577760845500 ) ) ; +#13278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13279 = EDGE_LOOP ( 'NONE', ( #72524, #75243, #58628 ) ) ; +#13280 = ORIENTED_EDGE ( 'NONE', *, *, #12392, .T. ) ; +#13281 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, -1.837214462594577400E-015, -19.28932211331792200 ) ) ; +#13282 = ORIENTED_EDGE ( 'NONE', *, *, #46861, .T. ) ; +#13283 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#13284 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999934300, 67.70389005397380800, -28.37519436813198600 ) ) ; +#13285 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13286 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13288 = CIRCLE ( 'NONE', #59454, 9.500000000000097700 ) ; +#13289 = CIRCLE ( 'NONE', #23337, 9.500000000000095900 ) ; +#13290 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957533900, 32.09027028261002100, -28.70555803802995200 ) ) ; +#13291 = EDGE_LOOP ( 'NONE', ( #79067, #54983, #64508 ) ) ; +#13292 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828107000, 90.46231468379640700, -28.37082013777820300 ) ) ; +#13293 = AXIS2_PLACEMENT_3D ( 'NONE', #1432, #44916, #7672 ) ; +#13294 = ORIENTED_EDGE ( 'NONE', *, *, #10103, .T. ) ; +#13295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45969, #2458, #8713, #52216 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0007677775503743601100 ), + .UNSPECIFIED. ) ; +#13296 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13297 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819156900, 71.65075715145272300, -28.20555803803005900 ) ) ; +#13298 = ORIENTED_EDGE ( 'NONE', *, *, #57337, .F. ) ; +#13299 = CONICAL_SURFACE ( 'NONE', #9637, 10.50000000000009600, 0.7853981633974500600 ) ; +#13300 = EDGE_LOOP ( 'NONE', ( #63560, #25289, #55223, #42729, #4480 ) ) ; +#13301 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13302 = EDGE_CURVE ( 'NONE', #53626, #70561, #74130, .T. ) ; +#13303 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 17.16666666666667100, 6.794441961969992500 ) ) ; +#13304 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679516300, 60.51916201875676600, -28.45106778992441200 ) ) ; +#13305 = VERTEX_POINT ( 'NONE', #10888 ) ; +#13306 = FACE_OUTER_BOUND ( 'NONE', #61983, .T. ) ; +#13307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13309 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#13310 = VERTEX_POINT ( 'NONE', #60674 ) ; +#13311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13312 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27342, #38986, #14797, #33567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.356538679906350400E-015, 0.001492013864198137900 ), + .UNSPECIFIED. ) ; +#13313 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769035900, 39.78860447109614300, -28.53900456328626900 ) ) ; +#13314 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#13315 = PLANE ( 'NONE', #69692 ) ; +#13316 = EDGE_CURVE ( 'NONE', #45025, #30375, #10002, .T. ) ; +#13317 = EDGE_CURVE ( 'NONE', #4401, #1277, #59673, .T. ) ; +#13318 = CONICAL_SURFACE ( 'NONE', #31844, 10.00000000000009200, 0.7853981633974447300 ) ; +#13319 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ; +#13320 = CONICAL_SURFACE ( 'NONE', #37851, 10.50000000000009600, 0.7853981633974500600 ) ; +#13321 = ORIENTED_EDGE ( 'NONE', *, *, #24168, .F. ) ; +#13322 = CARTESIAN_POINT ( 'NONE', ( 8.705837858217824600, 24.54999999999999700, -28.37136602294608100 ) ) ; +#13323 = ORIENTED_EDGE ( 'NONE', *, *, #65456, .T. ) ; +#13324 = CONICAL_SURFACE ( 'NONE', #59251, 10.00000000000009400, 0.7853981633974447300 ) ; +#13325 = AXIS2_PLACEMENT_3D ( 'NONE', #54245, #17005, #60539 ) ; +#13326 = EDGE_CURVE ( 'NONE', #31391, #24749, #45139, .T. ) ; +#13327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13328 = EDGE_CURVE ( 'NONE', #4437, #55203, #30746, .T. ) ; +#13330 = ORIENTED_EDGE ( 'NONE', *, *, #58237, .F. ) ; +#13329 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13331 = EDGE_CURVE ( 'NONE', #76920, #71905, #16283, .T. ) ; +#13332 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13333 = ADVANCED_FACE ( 'NONE', ( #26568 ), #55712, .F. ) ; +#13334 = CONICAL_SURFACE ( 'NONE', #42610, 10.50000000000009600, 0.7853981633974500600 ) ; +#13335 = AXIS2_PLACEMENT_3D ( 'NONE', #77534, #40255, #2990 ) ; +#13336 = CONICAL_SURFACE ( 'NONE', #73060, 10.00000000000009400, 0.7853981633974447300 ) ; +#13337 = VERTEX_POINT ( 'NONE', #73707 ) ; +#13338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13339 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13341 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74383, #61868, #62132, #24858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795752900 ), + .UNSPECIFIED. ) ; +#13340 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650755000, 40.89456479767169100, -28.70555803802996700 ) ) ; +#13342 = ORIENTED_EDGE ( 'NONE', *, *, #41743, .T. ) ; +#13343 = ORIENTED_EDGE ( 'NONE', *, *, #57478, .T. ) ; +#13344 = ADVANCED_FACE ( 'NONE', ( #72311 ), #22651, .F. ) ; +#13345 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 60.83333333333335000, 0.1341879241256075400 ) ) ; +#13346 = AXIS2_PLACEMENT_3D ( 'NONE', #53274, #65810, #40760 ) ; +#13347 = AXIS2_PLACEMENT_3D ( 'NONE', #28017, #71499, #34232 ) ; +#13348 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70521, #33533, #71063, #33807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247643702800, 0.0009605145132142017000 ), + .UNSPECIFIED. ) ; +#13349 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 25.83333333333333600, 0.9380355014189731800 ) ) ; +#13350 = CONICAL_SURFACE ( 'NONE', #62665, 10.00000000000009200, 0.7853981633974447300 ) ; +#13351 = CARTESIAN_POINT ( 'NONE', ( -10.53518765398293600, 9.406791769321971600, -28.68794773163825000 ) ) ; +#13352 = VERTEX_POINT ( 'NONE', #48909 ) ; +#13353 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 41.24660241562190100, -28.20555803802996700 ) ) ; +#13354 = ORIENTED_EDGE ( 'NONE', *, *, #75428, .T. ) ; +#13355 = ADVANCED_FACE ( 'NONE', ( #24598 ), #70314, .F. ) ; +#13356 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#13357 = ADVANCED_FACE ( 'NONE', ( #43066 ), #37213, .F. ) ; +#13358 = ORIENTED_EDGE ( 'NONE', *, *, #35939, .T. ) ; +#13359 = ORIENTED_EDGE ( 'NONE', *, *, #30033, .T. ) ; +#13360 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 63.16666666666667900, 1.741883078712356500 ) ) ; +#13361 = ORIENTED_EDGE ( 'NONE', *, *, #7313, .T. ) ; +#13362 = CARTESIAN_POINT ( 'NONE', ( -2.677527484459523200, 9.342828874293905600, -28.51468825946486900 ) ) ; +#13363 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389100, 9.936502946951318200, -28.30782889147480600 ) ) ; +#13364 = CYLINDRICAL_SURFACE ( 'NONE', #30753, 10.00000000000000200 ) ; +#13365 = AXIS2_PLACEMENT_3D ( 'NONE', #31354, #18827, #68604 ) ; +#13366 = ORIENTED_EDGE ( 'NONE', *, *, #49252, .T. ) ; +#13367 = EDGE_CURVE ( 'NONE', #7679, #77113, #1777, .T. ) ; +#13368 = VERTEX_POINT ( 'NONE', #42937 ) ; +#13369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13371 = ADVANCED_FACE ( 'NONE', ( #8022 ), #18206, .T. ) ; +#13372 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510334500, 9.940690926013795400, -28.35186440610855000 ) ) ; +#13373 = ORIENTED_EDGE ( 'NONE', *, *, #24981, .F. ) ; +#13374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13375 = CIRCLE ( 'NONE', #39283, 10.00000000000009400 ) ; +#13376 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#13377 = EDGE_LOOP ( 'NONE', ( #61582, #19885, #60304, #595 ) ) ; +#13378 = ORIENTED_EDGE ( 'NONE', *, *, #50507, .F. ) ; +#13379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13380 = EDGE_CURVE ( 'NONE', #20051, #29595, #44992, .T. ) ; +#13381 = EDGE_LOOP ( 'NONE', ( #26553, #37276, #62183 ) ) ; +#13382 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074378500, 31.78032162676580400, -28.55467576046956100 ) ) ; +#13383 = FACE_OUTER_BOUND ( 'NONE', #68268, .T. ) ; +#13384 = CARTESIAN_POINT ( 'NONE', ( 9.677527484459426800, 9.342828874293918100, -28.51468825946483000 ) ) ; +#13385 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#13386 = AXIS2_PLACEMENT_3D ( 'NONE', #77090, #15077, #2533 ) ; +#13387 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13388 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13389 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13390 = CIRCLE ( 'NONE', #78818, 9.500000000000099500 ) ; +#13391 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 41.61077422949657000, -28.37255355648634500 ) ) ; +#13392 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 59.91070809551060700, -28.20555803802997700 ) ) ; +#13393 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747181000, 18.13131911501876200, -28.51286550264506300 ) ) ; +#13394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13395 = ORIENTED_EDGE ( 'NONE', *, *, #4029, .T. ) ; +#13396 = CARTESIAN_POINT ( 'NONE', ( -2.254548258615140600, 18.09617684379260500, -28.64146614751462400 ) ) ; +#13397 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13398 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#13399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13400 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 66.66666666666670000, -8.133761268305512700 ) ) ; +#13401 = CONICAL_SURFACE ( 'NONE', #32312, 10.50000000000009600, 0.7853981633974518300 ) ; +#13402 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504966900, 31.40771342879321200, -28.53891855579988100 ) ) ; +#13403 = VERTEX_POINT ( 'NONE', #80219 ) ; +#13404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13405 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15856, #77875, #28419, #71908 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723709900, 0.0008252574424211568200 ), + .UNSPECIFIED. ) ; +#13406 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13408 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55738, #42953, #68260, #31016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940576976800 ), + .UNSPECIFIED. ) ; +#13409 = CONICAL_SURFACE ( 'NONE', #38847, 10.50000000000009800, 0.7853981633974500600 ) ; +#13410 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702741700, 79.37488905616109500, -28.55192314908465400 ) ) ; +#13411 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13412 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#13413 = AXIS2_PLACEMENT_3D ( 'NONE', #79123, #60370, #4579 ) ; +#13414 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 71.96823913367204300, -28.70555803802997700 ) ) ; +#13415 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#13416 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 73.67681279774498600, -28.70555803802997700 ) ) ; +#13417 = ORIENTED_EDGE ( 'NONE', *, *, #22140, .T. ) ; +#13418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63971, #39166, #57953, #20708 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067977800 ), + .UNSPECIFIED. ) ; +#13419 = EDGE_CURVE ( 'NONE', #30625, #56207, #53783, .T. ) ; +#13420 = CIRCLE ( 'NONE', #80759, 10.00000000000009400 ) ; +#13421 = ORIENTED_EDGE ( 'NONE', *, *, #13222, .F. ) ; +#13422 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13423 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714282000, 43.67681279774500800, -28.70555803802997700 ) ) ; +#13424 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 31.83333333333334600, 6.794441961969992500 ) ) ; +#13425 = ORIENTED_EDGE ( 'NONE', *, *, #35722, .T. ) ; +#13426 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819378900, 81.65075715145303500, -28.20555803802997700 ) ) ; +#13427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52326, #77388, #58881, #21653 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.853303177097459000E-005, 0.0008082646680357284600 ), + .UNSPECIFIED. ) ; +#13428 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725380600, 53.66464174796081500, -28.53896444442226600 ) ) ; +#13429 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474190500, 28.23827450271715000, -28.47230003642276600 ) ) ; +#13430 = ADVANCED_FACE ( 'NONE', ( #6096 ), #62006, .T. ) ; +#13431 = CIRCLE ( 'NONE', #37969, 9.500000000000099500 ) ; +#13432 = FACE_OUTER_BOUND ( 'NONE', #24343, .T. ) ; +#13433 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .F. ) ; +#13435 = EDGE_CURVE ( 'NONE', #11971, #25276, #68121, .T. ) ; +#13434 = ORIENTED_EDGE ( 'NONE', *, *, #38478, .T. ) ; +#13436 = ORIENTED_EDGE ( 'NONE', *, *, #23544, .F. ) ; +#13437 = ORIENTED_EDGE ( 'NONE', *, *, #54781, .T. ) ; +#13438 = EDGE_CURVE ( 'NONE', #49980, #9849, #53657, .T. ) ; +#13439 = ORIENTED_EDGE ( 'NONE', *, *, #26658, .T. ) ; +#13440 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#13441 = ADVANCED_FACE ( 'NONE', ( #20703 ), #18741, .F. ) ; +#13442 = AXIS2_PLACEMENT_3D ( 'NONE', #22879, #60152, #53875 ) ; +#13443 = VERTEX_POINT ( 'NONE', #43716 ) ; +#13444 = EDGE_CURVE ( 'NONE', #10423, #77818, #57683, .T. ) ; +#13445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78819, #22514, #22774, #41526 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925642845600E-007, 0.0004431156063177122900 ), + .UNSPECIFIED. ) ; +#13446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13447 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 22.65857157145701000, -28.20555803802995200 ) ) ; +#13448 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 3.166666666666668700, -12.20555803803000000 ) ) ; +#13449 = EDGE_CURVE ( 'NONE', #50710, #73124, #39179, .T. ) ; +#13450 = CIRCLE ( 'NONE', #77750, 10.00000000000009400 ) ; +#13451 = AXIS2_PLACEMENT_3D ( 'NONE', #49875, #12678, #56152 ) ; +#13453 = EDGE_LOOP ( 'NONE', ( #79160, #65192, #61227 ) ) ; +#13452 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13454 = ORIENTED_EDGE ( 'NONE', *, *, #53340, .F. ) ; +#13455 = ADVANCED_FACE ( 'NONE', ( #68375 ), #49834, .F. ) ; +#13456 = EDGE_LOOP ( 'NONE', ( #34516, #53781, #20638, #16199, #56955 ) ) ; +#13457 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 41.67701665379225100, -28.20555803802997400 ) ) ; +#13458 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656716300, 28.85339758437810400, -28.20555803802994200 ) ) ; +#13459 = CARTESIAN_POINT ( 'NONE', ( 18.70190360221199900, 2.596190742246117500, -25.42743952352358500 ) ) ; +#13460 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#13461 = FACE_OUTER_BOUND ( 'NONE', #29666, .T. ) ; +#13462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13463 = AXIS2_PLACEMENT_3D ( 'NONE', #44242, #69040, #13308 ) ; +#13464 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.40050506338822000, -28.70555803802996700 ) ) ; +#13465 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13467 = ORIENTED_EDGE ( 'NONE', *, *, #54859, .T. ) ; +#13466 = EDGE_CURVE ( 'NONE', #21218, #576, #24743, .T. ) ; +#13468 = EDGE_CURVE ( 'NONE', #23348, #23151, #4139, .T. ) ; +#13469 = ADVANCED_FACE ( 'NONE', ( #2170 ), #64516, .T. ) ; +#13471 = AXIS2_PLACEMENT_3D ( 'NONE', #18627, #62156, #24890 ) ; +#13470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13473 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 37.66666666666667100, 1.294441961969997200 ) ) ; +#13474 = FACE_OUTER_BOUND ( 'NONE', #23258, .T. ) ; +#13475 = ORIENTED_EDGE ( 'NONE', *, *, #15796, .F. ) ; +#13476 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#13477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13478 = ORIENTED_EDGE ( 'NONE', *, *, #66179, .F. ) ; +#13479 = ORIENTED_EDGE ( 'NONE', *, *, #65614, .F. ) ; +#13480 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13481 = EDGE_CURVE ( 'NONE', #50917, #77263, #10287, .T. ) ; +#13482 = CARTESIAN_POINT ( 'NONE', ( 20.81273461120533600, 97.41273461120469800, -27.02555449080697500 ) ) ; +#13483 = ADVANCED_FACE ( 'NONE', ( #33330 ), #31398, .F. ) ; +#13484 = CARTESIAN_POINT ( 'NONE', ( 4.186539978270463500, 6.877501000801542500, -28.20555803803025800 ) ) ; +#13485 = CARTESIAN_POINT ( 'NONE', ( 11.76690734368979100, 55.80000000000027400, -28.70555803803047500 ) ) ; +#13486 = AXIS2_PLACEMENT_3D ( 'NONE', #4697, #10983, #41958 ) ; +#13487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13488 = AXIS2_PLACEMENT_3D ( 'NONE', #39618, #2333, #45840 ) ; +#13489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13490 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13491 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853689300, 51.25732391202355800, -28.20555803803030800 ) ) ; +#13492 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#13493 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488259300, 81.99560977511656300, -28.70555803802997700 ) ) ; +#13494 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000043200, 16.39962244433155500, -28.53664883431648400 ) ) ; +#13495 = CONICAL_SURFACE ( 'NONE', #64585, 10.50000000000009800, 0.7853981633974518300 ) ; +#13496 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#13497 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534584000, 39.99920551340398600, -28.70555803802995200 ) ) ; +#13498 = EDGE_LOOP ( 'NONE', ( #10842, #16634, #44975, #40520, #54686 ) ) ; +#13499 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13500 = ORIENTED_EDGE ( 'NONE', *, *, #11290, .T. ) ; +#13501 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13502 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#13503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13504 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769035900, 29.28860447109612900, -28.53900456328625500 ) ) ; +#13505 = VECTOR ( 'NONE', #23011, 1000.000000000000000 ) ; +#13506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49925, #6440, #62477, #25217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850278700, 0.0007596411030281088600 ), + .UNSPECIFIED. ) ; +#13507 = CIRCLE ( 'NONE', #34437, 9.500000000000095900 ) ; +#13508 = ORIENTED_EDGE ( 'NONE', *, *, #47224, .T. ) ; +#13509 = ORIENTED_EDGE ( 'NONE', *, *, #41269, .F. ) ; +#13510 = ORIENTED_EDGE ( 'NONE', *, *, #61833, .F. ) ; +#13511 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 44.00000000000000700, -1.205558038030002800 ) ) ; +#13512 = FACE_OUTER_BOUND ( 'NONE', #52650, .T. ) ; +#13513 = VERTEX_POINT ( 'NONE', #7268 ) ; +#13514 = ORIENTED_EDGE ( 'NONE', *, *, #37103, .F. ) ; +#13515 = ORIENTED_EDGE ( 'NONE', *, *, #59647, .F. ) ; +#13516 = ORIENTED_EDGE ( 'NONE', *, *, #75634, .T. ) ; +#13517 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 9.166666666666675000, -2.545304000185620600 ) ) ; +#13518 = AXIS2_PLACEMENT_3D ( 'NONE', #3406, #28496, #59177 ) ; +#13519 = ORIENTED_EDGE ( 'NONE', *, *, #6032, .F. ) ; +#13520 = CARTESIAN_POINT ( 'NONE', ( 3.976832725519293500, 28.58088969930761900, -28.30223898143234300 ) ) ; +#13521 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11710, #5704, #67987, #30738 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.456585301718499700E-017, 0.001871986839425511100 ), + .UNSPECIFIED. ) ; +#13522 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192848700, 76.79999999999998300, -28.70555803802997700 ) ) ; +#13523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#13524 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 32.47376207875059600, -28.70555803802996700 ) ) ; +#13525 = EDGE_CURVE ( 'NONE', #65209, #7754, #76579, .T. ) ; +#13526 = ORIENTED_EDGE ( 'NONE', *, *, #31641, .T. ) ; +#13527 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223653000, 71.76592160028388900, -28.37510699173804700 ) ) ; +#13528 = CIRCLE ( 'NONE', #26663, 10.00000000000009600 ) ; +#13529 = ORIENTED_EDGE ( 'NONE', *, *, #71629, .T. ) ; +#13530 = AXIS2_PLACEMENT_3D ( 'NONE', #9639, #53148, #15893 ) ; +#13531 = VERTEX_POINT ( 'NONE', #63351 ) ; +#13532 = VERTEX_POINT ( 'NONE', #38529 ) ; +#13533 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818961900, 79.94924284854708700, -28.20555803802997700 ) ) ; +#13534 = ORIENTED_EDGE ( 'NONE', *, *, #53422, .F. ) ; +#13535 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47535, #10317, #72616, #35358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964986100, 0.0005839769583133816100 ), + .UNSPECIFIED. ) ; +#13536 = ORIENTED_EDGE ( 'NONE', *, *, #36766, .F. ) ; +#13537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13538 = CONICAL_SURFACE ( 'NONE', #56261, 10.00000000000009400, 0.7853981633974447300 ) ; +#13539 = CARTESIAN_POINT ( 'NONE', ( 10.63940720644214900, 49.66749699759768100, -28.25435056028472400 ) ) ; +#13540 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#13541 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27308, #21042, #58285, #33531 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003260767396914605300, 0.003622829219719743400 ), + .UNSPECIFIED. ) ; +#13543 = ORIENTED_EDGE ( 'NONE', *, *, #26891, .F. ) ; +#13542 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174632600, 60.16054007504464400, -28.34042301926885100 ) ) ; +#13544 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13546 = EDGE_CURVE ( 'NONE', #59820, #42971, #47898, .T. ) ; +#13547 = PLANE ( 'NONE', #40053 ) ; +#13548 = FACE_OUTER_BOUND ( 'NONE', #74987, .T. ) ; +#13549 = ORIENTED_EDGE ( 'NONE', *, *, #15609, .T. ) ; +#13550 = ADVANCED_FACE ( 'NONE', ( #39161 ), #62533, .F. ) ; +#13551 = EDGE_CURVE ( 'NONE', #51373, #71109, #62146, .T. ) ; +#13552 = CARTESIAN_POINT ( 'NONE', ( -18.97459117908505300, 2.050482878231601800, -24.77442557013636200 ) ) ; +#13553 = VERTEX_POINT ( 'NONE', #7538 ) ; +#13554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13555 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#13556 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189933600, 31.47636006919907800, -28.38670679782166300 ) ) ; +#13558 = ORIENTED_EDGE ( 'NONE', *, *, #69055, .F. ) ; +#13557 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#13559 = ADVANCED_FACE ( 'NONE', ( #35321 ), #7808, .T. ) ; +#13560 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#13561 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13562 = EDGE_CURVE ( 'NONE', #15771, #23333, #47642, .T. ) ; +#13563 = ADVANCED_FACE ( 'NONE', ( #16803 ), #12903, .F. ) ; +#13564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13565 = EDGE_CURVE ( 'NONE', #34314, #47941, #29480, .T. ) ; +#13566 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567151000, 39.35339758437810800, -28.20555803802995200 ) ) ; +#13567 = AXIS2_PLACEMENT_3D ( 'NONE', #65013, #15491, #65302 ) ; +#13568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13569 = CIRCLE ( 'NONE', #56683, 9.500000000000099500 ) ; +#13570 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 15.00000000000001400, -9.205558038030005700 ) ) ; +#13571 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515380800, 80.58127875436092300, -28.53757464917582400 ) ) ; +#13572 = CIRCLE ( 'NONE', #50952, 10.50000000000009600 ) ; +#13573 = VERTEX_POINT ( 'NONE', #14359 ) ; +#13574 = ORIENTED_EDGE ( 'NONE', *, *, #31329, .F. ) ; +#13575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13576 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 80.34510448120796900, -28.37193179497697000 ) ) ; +#13578 = EDGE_LOOP ( 'NONE', ( #63856, #20778, #10864 ) ) ; +#13577 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#13579 = AXIS2_PLACEMENT_3D ( 'NONE', #4317, #78879, #47803 ) ; +#13580 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567146100, 39.35339758437810100, -28.20555803802995200 ) ) ; +#13581 = EDGE_CURVE ( 'NONE', #69902, #34852, #33213, .T. ) ; +#13582 = EDGE_CURVE ( 'NONE', #58778, #51761, #235, .T. ) ; +#13583 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15587, #52831, #28133, #71621 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287148516700E-007, 0.0004318378175225118900 ), + .UNSPECIFIED. ) ; +#13584 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#13585 = EDGE_CURVE ( 'NONE', #16590, #28278, #66440, .T. ) ; +#13586 = CIRCLE ( 'NONE', #62887, 10.00000000000009400 ) ; +#13587 = EDGE_LOOP ( 'NONE', ( #48194, #16966, #45681, #3821, #31159 ) ) ; +#13588 = CONICAL_SURFACE ( 'NONE', #9886, 10.50000000000009400, 0.7853981633974482800 ) ; +#13589 = VERTEX_POINT ( 'NONE', #64434 ) ; +#13590 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#13591 = ORIENTED_EDGE ( 'NONE', *, *, #17356, .T. ) ; +#13592 = AXIS2_PLACEMENT_3D ( 'NONE', #12857, #68861, #31353 ) ; +#13593 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#13594 = ORIENTED_EDGE ( 'NONE', *, *, #24981, .T. ) ; +#13595 = CYLINDRICAL_SURFACE ( 'NONE', #61124, 10.00000000000000000 ) ; +#13596 = ORIENTED_EDGE ( 'NONE', *, *, #66252, .T. ) ; +#13597 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .T. ) ; +#13598 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 27.50972971738994100, -28.70555803802994500 ) ) ; +#13599 = AXIS2_PLACEMENT_3D ( 'NONE', #71005, #33755, #77268 ) ; +#13600 = VERTEX_POINT ( 'NONE', #27147 ) ; +#13601 = ORIENTED_EDGE ( 'NONE', *, *, #21892, .T. ) ; +#13602 = ORIENTED_EDGE ( 'NONE', *, *, #73509, .F. ) ; +#13603 = VERTEX_POINT ( 'NONE', #33124 ) ; +#13604 = EDGE_CURVE ( 'NONE', #36931, #49730, #18760, .T. ) ; +#13605 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#13606 = AXIS2_PLACEMENT_3D ( 'NONE', #77038, #2489, #46000 ) ; +#13607 = AXIS2_PLACEMENT_3D ( 'NONE', #2744, #46257, #9006 ) ; +#13608 = ORIENTED_EDGE ( 'NONE', *, *, #14205, .F. ) ; +#13609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13610 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 96.59999999999999400, 16.29444196196998700 ) ) ; +#13611 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849376100, 28.77966528189956800, -28.30868034705243700 ) ) ; +#13612 = CONICAL_SURFACE ( 'NONE', #36995, 10.00000000000009400, 0.7853981633974447300 ) ; +#13613 = ORIENTED_EDGE ( 'NONE', *, *, #67775, .F. ) ; +#13614 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286462300, 78.93300507136145000, -28.67024809316607700 ) ) ; +#13615 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195808600, 42.59027028261223100, -28.70555803802997000 ) ) ; +#13616 = VERTEX_POINT ( 'NONE', #58415 ) ; +#13617 = VERTEX_POINT ( 'NONE', #64689 ) ; +#13618 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13619 = CONICAL_SURFACE ( 'NONE', #34827, 10.00000000000009200, 0.7853981633974447300 ) ; +#13620 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 58.66666666666667900, -3.705558038030004400 ) ) ; +#13621 = VERTEX_POINT ( 'NONE', #27432 ) ; +#13622 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 15.94142842854248700, -28.20555803803042500 ) ) ; +#13623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13624 = VERTEX_POINT ( 'NONE', #51841 ) ; +#13625 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#13626 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 23.66666666666668200, -5.205558038030003100 ) ) ; +#13627 = AXIS2_PLACEMENT_3D ( 'NONE', #11577, #55063, #17829 ) ; +#13628 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#13629 = CIRCLE ( 'NONE', #71279, 9.500000000000099500 ) ; +#13630 = ORIENTED_EDGE ( 'NONE', *, *, #32491, .T. ) ; +#13631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13632 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13633 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 61.00000000000001400, -1.205558038030002800 ) ) ; +#13634 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49157, #67956, #36934, #80475 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785988904200, 0.001246815221881815500 ), + .UNSPECIFIED. ) ; +#13635 = EDGE_LOOP ( 'NONE', ( #6394, #75323, #42142 ) ) ; +#13636 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 60.69966441803892100, -28.70555803802997700 ) ) ; +#13637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13638 = AXIS2_PLACEMENT_3D ( 'NONE', #27038, #70524, #33271 ) ; +#13639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13640 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#13641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13642 = EDGE_CURVE ( 'NONE', #39956, #42094, #4289, .T. ) ; +#13643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#13644 = AXIS2_PLACEMENT_3D ( 'NONE', #40176, #71193, #8619 ) ; +#13645 = FACE_OUTER_BOUND ( 'NONE', #45155, .T. ) ; +#13646 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 41.86172549728279800, -28.47230003642276900 ) ) ; +#13647 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488097600, 79.60439022488301900, -28.70555803802997700 ) ) ; +#13648 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13649 = FACE_OUTER_BOUND ( 'NONE', #30302, .T. ) ; +#13650 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725291500, 35.05000000000000400, -28.20555803802995200 ) ) ; +#13651 = ORIENTED_EDGE ( 'NONE', *, *, #45171, .F. ) ; +#13652 = CARTESIAN_POINT ( 'NONE', ( 3.390371656900544200, 8.516676710273198800, -28.59744054000112000 ) ) ; +#13653 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103800, 59.94924284854708700, -28.20555803802997700 ) ) ; +#13654 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13656 = ADVANCED_FACE ( 'NONE', ( #45949 ), #33658, .T. ) ; +#13657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13658 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818956600, 69.94924284854708700, -28.20555803802997700 ) ) ; +#13659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6306, #62348, #10145, #53648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061614900E-007, 0.001119323292485956200 ), + .UNSPECIFIED. ) ; +#13660 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 57.14999999999999900, -1.205558038030005300 ) ) ; +#13661 = CONICAL_SURFACE ( 'NONE', #774, 10.00000000000009200, 0.7853981633974447300 ) ; +#13662 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 79.77559325427188200, -28.45987523529578700 ) ) ; +#13663 = ORIENTED_EDGE ( 'NONE', *, *, #18060, .T. ) ; +#13664 = ORIENTED_EDGE ( 'NONE', *, *, #58489, .T. ) ; +#13665 = EDGE_CURVE ( 'NONE', #63311, #33779, #14835, .T. ) ; +#13666 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 64.50000000000001400, 4.650848422521016300 ) ) ; +#13667 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13668 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#13669 = ORIENTED_EDGE ( 'NONE', *, *, #64224, .F. ) ; +#13670 = CIRCLE ( 'NONE', #74112, 10.00000000000009200 ) ; +#13671 = EDGE_CURVE ( 'NONE', #56207, #66196, #60598, .T. ) ; +#13672 = ORIENTED_EDGE ( 'NONE', *, *, #26365, .T. ) ; +#13673 = ORIENTED_EDGE ( 'NONE', *, *, #13481, .F. ) ; +#13675 = ORIENTED_EDGE ( 'NONE', *, *, #42101, .F. ) ; +#13674 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 80.16054007504463600, -28.34042301926881200 ) ) ; +#13676 = PLANE ( 'NONE', #70423 ) ; +#13677 = EDGE_LOOP ( 'NONE', ( #3430, #34189, #78091, #74618 ) ) ; +#13678 = ORIENTED_EDGE ( 'NONE', *, *, #21035, .T. ) ; +#13679 = EDGE_LOOP ( 'NONE', ( #22094, #8238, #24763 ) ) ; +#13680 = EDGE_LOOP ( 'NONE', ( #71283, #12222, #57965, #62783 ) ) ; +#13681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13684 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13685 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 43.42856308690589600, -28.36981695106780800 ) ) ; +#13686 = EDGE_CURVE ( 'NONE', #25486, #32692, #70594, .T. ) ; +#13687 = ADVANCED_FACE ( 'NONE', ( #10948 ), #42060, .T. ) ; +#13688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33463, #2168, #2431, #45947 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782284100, 0.0004366687057309793800 ), + .UNSPECIFIED. ) ; +#13689 = EDGE_CURVE ( 'NONE', #31531, #32315, #58619, .T. ) ; +#13691 = VERTEX_POINT ( 'NONE', #52932 ) ; +#13690 = AXIS2_PLACEMENT_3D ( 'NONE', #15661, #59168, #21923 ) ; +#13692 = CONICAL_SURFACE ( 'NONE', #54155, 10.50000000000009600, 0.7853981633974500600 ) ; +#13693 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#13694 = VERTEX_POINT ( 'NONE', #28250 ) ; +#13695 = EDGE_CURVE ( 'NONE', #37106, #55691, #56132, .T. ) ; +#13696 = EDGE_LOOP ( 'NONE', ( #76775, #52717, #11072, #3753 ) ) ; +#13697 = EDGE_LOOP ( 'NONE', ( #36729, #57340, #19079, #54631, #71814 ) ) ; +#13698 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#13699 = ORIENTED_EDGE ( 'NONE', *, *, #74459, .T. ) ; +#13700 = ORIENTED_EDGE ( 'NONE', *, *, #26831, .T. ) ; +#13701 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13702 = CONICAL_SURFACE ( 'NONE', #18606, 10.00000000000009200, 0.7853981633974447300 ) ; +#13703 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 29.66666666666667500, -8.133761268305512700 ) ) ; +#13704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13705 = AXIS2_PLACEMENT_3D ( 'NONE', #23941, #54925, #61213 ) ; +#13706 = ORIENTED_EDGE ( 'NONE', *, *, #4373, .T. ) ; +#13707 = EDGE_CURVE ( 'NONE', #12868, #58440, #41671, .T. ) ; +#13708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#13709 = EDGE_CURVE ( 'NONE', #19205, #74524, #77119, .T. ) ; +#13710 = EDGE_CURVE ( 'NONE', #26934, #51007, #27254, .T. ) ; +#13711 = AXIS2_PLACEMENT_3D ( 'NONE', #7736, #76023, #44973 ) ; +#13712 = CONICAL_SURFACE ( 'NONE', #59239, 10.50000000000009600, 0.7853981633974518300 ) ; +#13714 = ORIENTED_EDGE ( 'NONE', *, *, #2564, .T. ) ; +#13713 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#13715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14530, #39255, #76519, #58039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572466748500E-007, 0.0007596410370205412800 ), + .UNSPECIFIED. ) ; +#13716 = ORIENTED_EDGE ( 'NONE', *, *, #69361, .T. ) ; +#13717 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 40.25227248018354900, -28.70555803802998400 ) ) ; +#13718 = AXIS2_PLACEMENT_3D ( 'NONE', #79651, #42366, #5116 ) ; +#13719 = AXIS2_PLACEMENT_3D ( 'NONE', #11800, #61319, #18044 ) ; +#13720 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819371400, 79.94924284854695900, -28.20555803802997700 ) ) ; +#13721 = CARTESIAN_POINT ( 'NONE', ( 9.254657264815442400, 41.50380841767820800, -28.64142799534457100 ) ) ; +#13722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13723 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 1.000000000000004200, 9.794441961969996100 ) ) ; +#13724 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105216900, 60.28233213024648800, -28.25051428653847200 ) ) ; +#13725 = FACE_OUTER_BOUND ( 'NONE', #6304, .T. ) ; +#13726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13727 = EDGE_LOOP ( 'NONE', ( #30169, #53169, #49 ) ) ; +#13728 = EDGE_LOOP ( 'NONE', ( #45589, #33149, #75658, #80078 ) ) ; +#13729 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 51.25732391202398500, -28.20555803802997700 ) ) ; +#13730 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -2.622414004699312700E-015, -19.87312313466948100 ) ) ; +#13731 = CARTESIAN_POINT ( 'NONE', ( -9.881082274201251200, 81.10238820582982600, -28.32098513914462100 ) ) ; +#13732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13733 = ORIENTED_EDGE ( 'NONE', *, *, #67280, .F. ) ; +#13734 = CARTESIAN_POINT ( 'NONE', ( 17.03244381443358800, 58.39936314726096400, -28.49841021997939800 ) ) ; +#13735 = AXIS2_PLACEMENT_3D ( 'NONE', #54943, #36439, #79981 ) ; +#13736 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13737 = ADVANCED_FACE ( 'NONE', ( #43985 ), #56654, .T. ) ; +#13738 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13739 = CIRCLE ( 'NONE', #69532, 9.500000000000099500 ) ; +#13740 = EDGE_LOOP ( 'NONE', ( #29697, #27253, #66141 ) ) ; +#13741 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.31066373133501900, -28.53923937255171200 ) ) ; +#13742 = EDGE_LOOP ( 'NONE', ( #42535, #53767, #48694, #2603 ) ) ; +#13743 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 35.50000000000000700, -4.865812075874393000 ) ) ; +#13744 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#13745 = CARTESIAN_POINT ( 'NONE', ( 4.533744140368694000, 91.59999999999999400, -28.70555803803016200 ) ) ; +#13746 = EDGE_CURVE ( 'NONE', #80776, #54615, #12790, .T. ) ; +#13747 = CONICAL_SURFACE ( 'NONE', #41200, 10.50000000000009600, 0.7853981633974500600 ) ; +#13748 = ORIENTED_EDGE ( 'NONE', *, *, #57286, .F. ) ; +#13749 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580925600, 16.86736912940420300, -28.67620115463453300 ) ) ; +#13750 = AXIS2_PLACEMENT_3D ( 'NONE', #25033, #68553, #31295 ) ; +#13751 = ORIENTED_EDGE ( 'NONE', *, *, #31906, .F. ) ; +#13752 = VERTEX_POINT ( 'NONE', #35024 ) ; +#13753 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583940300, 39.58874248361071600, -28.53740755999535100 ) ) ; +#13754 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#13755 = ORIENTED_EDGE ( 'NONE', *, *, #28473, .F. ) ; +#13756 = CARTESIAN_POINT ( 'NONE', ( 16.57129829953284900, 94.74259659907681900, -28.26701575348027300 ) ) ; +#13757 = ADVANCED_FACE ( 'NONE', ( #79091 ), #23598, .T. ) ; +#13758 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13759 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13760 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 61.46283204837325800, -28.48697406221693400 ) ) ; +#13761 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#13762 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344323300, 17.92298334620759800, -28.20555803802994200 ) ) ; +#13763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62104, #74609, #12594, #56090 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849851000, 0.0007596411030280970400 ), + .UNSPECIFIED. ) ; +#13764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13765 = ORIENTED_EDGE ( 'NONE', *, *, #56596, .T. ) ; +#13766 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.93250300240229200, -28.20555803802996700 ) ) ; +#13767 = FACE_OUTER_BOUND ( 'NONE', #62343, .T. ) ; +#13768 = AXIS2_PLACEMENT_3D ( 'NONE', #10159, #3879, #22669 ) ; +#13769 = ORIENTED_EDGE ( 'NONE', *, *, #39754, .T. ) ; +#13770 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105229700, 60.28233213024613200, -28.25051428653883800 ) ) ; +#13771 = ORIENTED_EDGE ( 'NONE', *, *, #51149, .T. ) ; +#13772 = ADVANCED_FACE ( 'NONE', ( #73231 ), #71272, .F. ) ; +#13773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13774 = ORIENTED_EDGE ( 'NONE', *, *, #17993, .T. ) ; +#13775 = ORIENTED_EDGE ( 'NONE', *, *, #78, .F. ) ; +#13776 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492634400, 28.07379779496234900, -28.70555803802994200 ) ) ; +#13777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13778 = CIRCLE ( 'NONE', #44052, 9.500000000000095900 ) ; +#13779 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828105100, 61.13768531620325300, -28.37082013777818900 ) ) ; +#13780 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13781 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474192200, 20.86172549728280500, -28.47230003642276200 ) ) ; +#13782 = ADVANCED_FACE ( 'NONE', ( #8951 ), #38140, .F. ) ; +#13783 = ORIENTED_EDGE ( 'NONE', *, *, #32474, .T. ) ; +#13784 = EDGE_CURVE ( 'NONE', #79836, #54838, #54708, .T. ) ; +#13785 = FACE_OUTER_BOUND ( 'NONE', #52826, .T. ) ; +#13786 = ORIENTED_EDGE ( 'NONE', *, *, #76631, .F. ) ; +#13787 = EDGE_CURVE ( 'NONE', #43734, #68463, #75171, .T. ) ; +#13788 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 7.000000000000008900, -1.205558038030002800 ) ) ; +#13789 = EDGE_CURVE ( 'NONE', #80726, #26683, #79105, .T. ) ; +#13790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13791 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13792 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001200, 12.87738371066728100, -28.70555803802994200 ) ) ; +#13793 = EDGE_CURVE ( 'NONE', #36682, #26683, #27508, .T. ) ; +#13794 = EDGE_CURVE ( 'NONE', #77757, #58204, #64650, .T. ) ; +#13795 = ORIENTED_EDGE ( 'NONE', *, *, #19397, .F. ) ; +#13796 = ORIENTED_EDGE ( 'NONE', *, *, #48994, .F. ) ; +#13797 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53034, #9526, #15793, #59313 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.477419510106528000E-005, 0.0003518478340460201000 ), + .UNSPECIFIED. ) ; +#13798 = ORIENTED_EDGE ( 'NONE', *, *, #21049, .F. ) ; +#13799 = AXIS2_PLACEMENT_3D ( 'NONE', #27218, #58188, #64494 ) ; +#13800 = EDGE_CURVE ( 'NONE', #15269, #23024, #50114, .T. ) ; +#13801 = EDGE_CURVE ( 'NONE', #53696, #68977, #35708, .T. ) ; +#13802 = EDGE_CURVE ( 'NONE', #41717, #30223, #40113, .T. ) ; +#13803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13804 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846314900, 70.79999999999998300, -28.55171188418376000 ) ) ; +#13805 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343285200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#13806 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993300, 20.07757630314202800, -28.53861367218591700 ) ) ; +#13807 = CIRCLE ( 'NONE', #44949, 9.500000000000099500 ) ; +#13808 = ORIENTED_EDGE ( 'NONE', *, *, #51042, .F. ) ; +#13809 = ORIENTED_EDGE ( 'NONE', *, *, #50551, .F. ) ; +#13810 = AXIS2_PLACEMENT_3D ( 'NONE', #53961, #60248, #22978 ) ; +#13811 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13812 = ORIENTED_EDGE ( 'NONE', *, *, #17532, .T. ) ; +#13813 = FACE_OUTER_BOUND ( 'NONE', #75561, .T. ) ; +#13814 = ORIENTED_EDGE ( 'NONE', *, *, #60525, .F. ) ; +#13815 = CARTESIAN_POINT ( 'NONE', ( -17.50822693569402900, 4.983144322931033300, -27.35769136863838500 ) ) ; +#13816 = VERTEX_POINT ( 'NONE', #67079 ) ; +#13817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13818 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922505700, 61.50962196508495300, -28.29483400905893800 ) ) ; +#13819 = ORIENTED_EDGE ( 'NONE', *, *, #80520, .T. ) ; +#13820 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180781400, 69.94924284854683100, -28.20555803803030800 ) ) ; +#13821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13822 = CARTESIAN_POINT ( 'NONE', ( -3.959731041493563800, 30.87561462481246700, -28.30309985153375900 ) ) ; +#13823 = AXIS2_PLACEMENT_3D ( 'NONE', #19699, #19961, #1173 ) ; +#13824 = AXIS2_PLACEMENT_3D ( 'NONE', #74281, #55479, #36972 ) ; +#13825 = AXIS2_PLACEMENT_3D ( 'NONE', #37570, #328, #43824 ) ; +#13826 = CIRCLE ( 'NONE', #11919, 10.50000000000009600 ) ; +#13827 = ADVANCED_FACE ( 'NONE', ( #7022 ), #3112, .T. ) ; +#13828 = CIRCLE ( 'NONE', #3521, 10.00000000000009200 ) ; +#13829 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390318300, 90.13716795162640900, -28.48697406221641500 ) ) ; +#13830 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 12.83333333333334300, 6.794441961969992500 ) ) ; +#13831 = ORIENTED_EDGE ( 'NONE', *, *, #79427, .F. ) ; +#13832 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890762800, 20.12856921007282900, -28.37063977681167500 ) ) ; +#13833 = ORIENTED_EDGE ( 'NONE', *, *, #8284, .F. ) ; +#13834 = ORIENTED_EDGE ( 'NONE', *, *, #40587, .T. ) ; +#13835 = ORIENTED_EDGE ( 'NONE', *, *, #51599, .F. ) ; +#13836 = CONICAL_SURFACE ( 'NONE', #80463, 10.50000000000009600, 0.7853981633974518300 ) ; +#13837 = ORIENTED_EDGE ( 'NONE', *, *, #61205, .F. ) ; +#13838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13839 = FACE_OUTER_BOUND ( 'NONE', #13144, .T. ) ; +#13840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13841 = ADVANCED_FACE ( 'NONE', ( #25555 ), #11332, .T. ) ; +#13842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13843 = AXIS2_PLACEMENT_3D ( 'NONE', #17058, #60580, #23299 ) ; +#13844 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007438000, 48.81967837323413300, -28.55467576046958600 ) ) ; +#13845 = EDGE_CURVE ( 'NONE', #19684, #71807, #21260, .T. ) ; +#13846 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28924, #66155, #41371, #4109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259792450400E-007, 0.0004559721492004691100 ), + .UNSPECIFIED. ) ; +#13849 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13850 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 35.04999999999999700, -28.20555803802995200 ) ) ; +#13851 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13852 = CONICAL_SURFACE ( 'NONE', #22683, 10.50000000000009600, 0.7853981633974500600 ) ; +#13853 = ORIENTED_EDGE ( 'NONE', *, *, #70392, .F. ) ; +#13855 = ORIENTED_EDGE ( 'NONE', *, *, #17824, .F. ) ; +#13854 = ADVANCED_FACE ( 'NONE', ( #52758 ), #30118, .T. ) ; +#13857 = EDGE_CURVE ( 'NONE', #30155, #19665, #36224, .T. ) ; +#13856 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33196, #70447, #2171, #45658 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191440980500E-007, 0.0006649560044143915600 ), + .UNSPECIFIED. ) ; +#13858 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#13859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36342, #4790, #48830, #11613 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286303202100E-007, 0.0007303759720926909700 ), + .UNSPECIFIED. ) ; +#13860 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#13861 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -49.81214711292819400, 8.794441961969989000 ) ) ; +#13862 = CARTESIAN_POINT ( 'NONE', ( 9.769169305342947100, 80.65007990305406300, -28.43638873268713500 ) ) ; +#13863 = ADVANCED_FACE ( 'NONE', ( #69305 ), #1158, .F. ) ; +#13864 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36754, #11765, #49241, #12028 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983716875119300E-007, 0.001076779618376410800 ), + .UNSPECIFIED. ) ; +#13865 = AXIS2_PLACEMENT_3D ( 'NONE', #75707, #32211, #44661 ) ; +#13866 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390328900, 71.46283204837320100, -28.48697406221674600 ) ) ; +#13867 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880588300, 46.17103694117757600, -28.53160243214820100 ) ) ; +#13868 = ORIENTED_EDGE ( 'NONE', *, *, #40561, .F. ) ; +#13869 = CARTESIAN_POINT ( 'NONE', ( 11.74546181355822400, 28.59617548195244300, -28.64146967277531900 ) ) ; +#13870 = ORIENTED_EDGE ( 'NONE', *, *, #78737, .F. ) ; +#13871 = ADVANCED_FACE ( 'NONE', ( #34282 ), #11864, .T. ) ; +#13872 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 56.50000000000002800, 2.454695999814380200 ) ) ; +#13873 = AXIS2_PLACEMENT_3D ( 'NONE', #79276, #41991, #4724 ) ; +#13874 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 60.34510448120794000, -28.37193179497697000 ) ) ; +#13875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13876 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 21.50000000000001400, 4.650848422521012700 ) ) ; +#13877 = CIRCLE ( 'NONE', #49609, 10.50000000000009200 ) ; +#13878 = ORIENTED_EDGE ( 'NONE', *, *, #65071, .T. ) ; +#13879 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.23796787468679200, -28.38801640354855100 ) ) ; +#13880 = CIRCLE ( 'NONE', #11816, 10.50000000000009600 ) ; +#13881 = CARTESIAN_POINT ( 'NONE', ( 17.36049707220277600, 9.932503002402292200, -28.25438406275897700 ) ) ; +#13883 = EDGE_CURVE ( 'NONE', #5650, #64739, #17735, .T. ) ; +#13882 = ORIENTED_EDGE ( 'NONE', *, *, #61347, .T. ) ; +#13884 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13885 = CARTESIAN_POINT ( 'NONE', ( 15.66282623155051300, 91.93141311577527100, -28.70555803803001600 ) ) ; +#13886 = CIRCLE ( 'NONE', #11122, 9.500000000000097700 ) ; +#13887 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 58.83333333333335000, -4.152999154772353500 ) ) ; +#13888 = ORIENTED_EDGE ( 'NONE', *, *, #1510, .T. ) ; +#13889 = ORIENTED_EDGE ( 'NONE', *, *, #64503, .F. ) ; +#13890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13892 = FACE_OUTER_BOUND ( 'NONE', #9084, .T. ) ; +#13893 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6158, #49366, #55908, #18673 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750893000, 0.0007596411030278636100 ), + .UNSPECIFIED. ) ; +#13894 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849376100, 28.77966528189956500, -28.30868034705243400 ) ) ; +#13895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13896 = VERTEX_POINT ( 'NONE', #24373 ) ; +#13897 = CARTESIAN_POINT ( 'NONE', ( 3.499999999986129800, 60.90050506339297000, -28.70555803803014400 ) ) ; +#13898 = EDGE_CURVE ( 'NONE', #73072, #57368, #67372, .T. ) ; +#13899 = CONICAL_SURFACE ( 'NONE', #63980, 10.00000000000009400, 0.7853981633974447300 ) ; +#13900 = ORIENTED_EDGE ( 'NONE', *, *, #23703, .F. ) ; +#13901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13902 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362722400, 54.03471854269720600, -28.66119098264626100 ) ) ; +#13903 = ORIENTED_EDGE ( 'NONE', *, *, #79904, .T. ) ; +#13904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13905 = ORIENTED_EDGE ( 'NONE', *, *, #61270, .T. ) ; +#13906 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 90.51916201875609100, -28.45106778992441600 ) ) ; +#13907 = FACE_OUTER_BOUND ( 'NONE', #57960, .T. ) ; +#13908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13909 = ORIENTED_EDGE ( 'NONE', *, *, #22252, .F. ) ; +#13910 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13911 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#13912 = FACE_OUTER_BOUND ( 'NONE', #49908, .T. ) ; +#13913 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444414300, 59.72166103827299100, -28.53892303408254000 ) ) ; +#13914 = AXIS2_PLACEMENT_3D ( 'NONE', #43703, #6469, #49947 ) ; +#13915 = EDGE_CURVE ( 'NONE', #72544, #8942, #19689, .T. ) ; +#13916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13917 = EDGE_CURVE ( 'NONE', #1484, #27898, #50780, .T. ) ; +#13918 = CARTESIAN_POINT ( 'NONE', ( 10.62858178328674600, 70.16749699759752400, -28.25056166218050900 ) ) ; +#13919 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653715900, 80.20590598242350200, -28.39369363572374600 ) ) ; +#13920 = EDGE_LOOP ( 'NONE', ( #16969, #34090, #27380, #40411, #38377 ) ) ; +#13921 = ORIENTED_EDGE ( 'NONE', *, *, #36026, .T. ) ; +#13922 = CARTESIAN_POINT ( 'NONE', ( 17.38218670428394600, 49.39495213045394500, -28.41843566569990600 ) ) ; +#13923 = EDGE_CURVE ( 'NONE', #26683, #51524, #6773, .T. ) ; +#13924 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#13925 = AXIS2_PLACEMENT_3D ( 'NONE', #11764, #67506, #55250 ) ; +#13926 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 62.33333333333333600, -5.205558038030008400 ) ) ; +#13927 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13928 = FACE_OUTER_BOUND ( 'NONE', #7605, .T. ) ; +#13929 = ORIENTED_EDGE ( 'NONE', *, *, #41638, .T. ) ; +#13930 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819633000, 51.65075715145291500, -28.20555803803005900 ) ) ; +#13931 = CONICAL_SURFACE ( 'NONE', #45115, 10.00000000000009600, 0.7853981633974482800 ) ; +#13932 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#13933 = AXIS2_PLACEMENT_3D ( 'NONE', #75891, #1092, #38599 ) ; +#13934 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 51.61077422949656300, -28.37255355648634500 ) ) ; +#13935 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#13936 = AXIS2_PLACEMENT_3D ( 'NONE', #79008, #16973, #4449 ) ; +#13937 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#13938 = EDGE_CURVE ( 'NONE', #12182, #56502, #65453, .T. ) ; +#13939 = AXIS2_PLACEMENT_3D ( 'NONE', #12802, #56276, #19022 ) ; +#13940 = ADVANCED_FACE ( 'NONE', ( #5076 ), #30406, .T. ) ; +#13941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13942 = EDGE_LOOP ( 'NONE', ( #71262, #11437, #22637 ) ) ; +#13943 = ADVANCED_FACE ( 'NONE', ( #48842 ), #78068, .T. ) ; +#13944 = EDGE_CURVE ( 'NONE', #74996, #43147, #73112, .T. ) ; +#13945 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 27.50000000000000400, 4.650848422521016300 ) ) ; +#13946 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000483200, 18.69949493661176400, -28.70555803803009500 ) ) ; +#13947 = AXIS2_PLACEMENT_3D ( 'NONE', #2103, #45591, #8343 ) ; +#13948 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#13949 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#13950 = ADVANCED_FACE ( 'NONE', ( #32325 ), #58631, .T. ) ; +#13951 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23554, #60838, #67075, #29855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293696900, 0.0007746639185392666500 ), + .UNSPECIFIED. ) ; +#13952 = FACE_OUTER_BOUND ( 'NONE', #15135, .T. ) ; +#13953 = ORIENTED_EDGE ( 'NONE', *, *, #37591, .T. ) ; +#13954 = FACE_OUTER_BOUND ( 'NONE', #448, .T. ) ; +#13955 = ORIENTED_EDGE ( 'NONE', *, *, #24147, .F. ) ; +#13956 = ORIENTED_EDGE ( 'NONE', *, *, #13938, .T. ) ; +#13957 = CONICAL_SURFACE ( 'NONE', #29865, 10.50000000000009600, 0.7853981633974500600 ) ; +#13958 = AXIS2_PLACEMENT_3D ( 'NONE', #19749, #63288, #26021 ) ; +#13959 = ORIENTED_EDGE ( 'NONE', *, *, #79435, .F. ) ; +#13960 = CARTESIAN_POINT ( 'NONE', ( 10.97684032349359000, 31.01912043132477600, -28.30223257055574100 ) ) ; +#13961 = ORIENTED_EDGE ( 'NONE', *, *, #23573, .T. ) ; +#13962 = EDGE_LOOP ( 'NONE', ( #40493, #11653, #70686 ) ) ; +#13963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1551, #45026, #20335, #63871 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0006589639548289237600 ), + .UNSPECIFIED. ) ; +#13964 = CONICAL_SURFACE ( 'NONE', #47750, 10.00000000000009200, 0.7853981633974447300 ) ; +#13965 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13967 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#13968 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, -1.166666666666665400, -12.20555803803000600 ) ) ; +#13969 = CIRCLE ( 'NONE', #18577, 10.50000000000009600 ) ; +#13970 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ; +#13971 = AXIS2_PLACEMENT_3D ( 'NONE', #39686, #2415, #45912 ) ; +#13972 = CARTESIAN_POINT ( 'NONE', ( 2.487278546917082200, 61.47860033657564600, -28.56001054660901100 ) ) ; +#13973 = FACE_OUTER_BOUND ( 'NONE', #10758, .T. ) ; +#13974 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284937800, 18.27966528189957200, -28.30868034705242300 ) ) ; +#13975 = VERTEX_POINT ( 'NONE', #38702 ) ; +#13976 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#13978 = ORIENTED_EDGE ( 'NONE', *, *, #13075, .T. ) ; +#13977 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48823, #17598, #55095, #17857 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.227482215243842600E-016, 0.001179148174662307300 ), + .UNSPECIFIED. ) ; +#13979 = EDGE_LOOP ( 'NONE', ( #11265, #46319, #39211 ) ) ; +#13980 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13981 = ORIENTED_EDGE ( 'NONE', *, *, #64101, .F. ) ; +#13982 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898008100, 81.21894733120746000, -28.33409528117022400 ) ) ; +#13983 = CIRCLE ( 'NONE', #20520, 10.50000000000009200 ) ; +#13984 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 59.97246552159111800, -28.38801640354855500 ) ) ; +#13985 = AXIS2_PLACEMENT_3D ( 'NONE', #7882, #51367, #14169 ) ; +#13986 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13987 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #300, #74848, #31341, #6567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004184300 ), + .UNSPECIFIED. ) ; +#13988 = PLANE ( 'NONE', #69780 ) ; +#13989 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13990 = ORIENTED_EDGE ( 'NONE', *, *, #7218, .T. ) ; +#13991 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#13992 = ORIENTED_EDGE ( 'NONE', *, *, #48811, .T. ) ; +#13993 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656722600, 49.85339758437807900, -28.20555803802996700 ) ) ; +#13994 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 33.33333333333332100, 3.124568980892187500 ) ) ; +#13995 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 61.43945992495501000, -28.34042301926918800 ) ) ; +#13996 = EDGE_LOOP ( 'NONE', ( #69667, #41369, #56099, #20386 ) ) ; +#13997 = FACE_OUTER_BOUND ( 'NONE', #69837, .T. ) ; +#13998 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 51.43250300240195800, -28.20555803803030800 ) ) ; +#13999 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274741400, 14.04999999999976300, -28.20555803803009500 ) ) ; +#14000 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14001 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#14002 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 49.42298334620782900, -28.20555803802996700 ) ) ; +#14003 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14004 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#14005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#14006 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#14007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14008 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14009 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146656800, 41.79130857014957500, -28.37223374938508900 ) ) ; +#14010 = CARTESIAN_POINT ( 'NONE', ( 16.93476732735787100, 43.14004081115113800, -28.51837550109417000 ) ) ; +#14011 = VECTOR ( 'NONE', #41921, 1000.000000000000000 ) ; +#14012 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#14013 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 80.34267608797554800, -28.20555803803047800 ) ) ; +#14014 = EDGE_CURVE ( 'NONE', #33091, #16929, #44119, .T. ) ; +#14015 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#14016 = VERTEX_POINT ( 'NONE', #57510 ) ; +#14017 = CARTESIAN_POINT ( 'NONE', ( 16.52197549498862400, 18.12306210240141600, -28.54786661478440400 ) ) ; +#14018 = CARTESIAN_POINT ( 'NONE', ( 8.314034490221697400, 14.04999999999997900, -28.37321477197626900 ) ) ; +#14019 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300910700, 68.40378923506904100, -28.61864990621732500 ) ) ; +#14021 = ORIENTED_EDGE ( 'NONE', *, *, #51316, .T. ) ; +#14020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14022 = EDGE_CURVE ( 'NONE', #32707, #6243, #29754, .T. ) ; +#14023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#14024 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19793, #75802, #13818, #57316 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478978545529900E-007, 0.0002930330874876977500 ), + .UNSPECIFIED. ) ; +#14025 = EDGE_CURVE ( 'NONE', #426, #62167, #46881, .T. ) ; +#14026 = CONICAL_SURFACE ( 'NONE', #539, 10.00000000000009600, 0.7853981633974447300 ) ; +#14027 = ORIENTED_EDGE ( 'NONE', *, *, #2301, .T. ) ; +#14028 = AXIS2_PLACEMENT_3D ( 'NONE', #54583, #42052, #17321 ) ; +#14029 = CIRCLE ( 'NONE', #236, 10.00000000000009600 ) ; +#14030 = EDGE_LOOP ( 'NONE', ( #20064, #17960, #65276, #39887 ) ) ; +#14031 = CIRCLE ( 'NONE', #5266, 9.500000000000099500 ) ; +#14032 = CIRCLE ( 'NONE', #29451, 9.500000000000097700 ) ; +#14033 = EDGE_LOOP ( 'NONE', ( #63401, #64042, #25614 ) ) ; +#14034 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14035 = VERTEX_POINT ( 'NONE', #1465 ) ; +#14036 = ORIENTED_EDGE ( 'NONE', *, *, #13944, .T. ) ; +#14037 = ADVANCED_FACE ( 'NONE', ( #63482 ), #76094, .F. ) ; +#14038 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 4.833333333333341900, 0.1341879241256075400 ) ) ; +#14039 = AXIS2_PLACEMENT_3D ( 'NONE', #27313, #70795, #33537 ) ; +#14040 = EDGE_CURVE ( 'NONE', #36658, #5611, #15259, .T. ) ; +#14041 = PLANE ( 'NONE', #49160 ) ; +#14042 = EDGE_CURVE ( 'NONE', #37106, #7767, #770, .T. ) ; +#14043 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14044 = EDGE_CURVE ( 'NONE', #18101, #74697, #11891, .T. ) ; +#14046 = CONICAL_SURFACE ( 'NONE', #49744, 10.50000000000009600, 0.7853981633974500600 ) ; +#14045 = AXIS2_PLACEMENT_3D ( 'NONE', #27390, #70880, #33622 ) ; +#14047 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#14048 = EDGE_LOOP ( 'NONE', ( #53088, #22929, #58855 ) ) ; +#14049 = CIRCLE ( 'NONE', #60762, 10.00000000000009200 ) ; +#14050 = AXIS2_PLACEMENT_3D ( 'NONE', #47471, #53766, #22510 ) ; +#14051 = EDGE_LOOP ( 'NONE', ( #31864, #5406, #15691, #15805, #43444, #9931, #71259, #66115 ) ) ; +#14052 = CARTESIAN_POINT ( 'NONE', ( 5.533180123657674100, 75.79999999999967000, -28.37307693585093600 ) ) ; +#14053 = ORIENTED_EDGE ( 'NONE', *, *, #35153, .T. ) ; +#14054 = ORIENTED_EDGE ( 'NONE', *, *, #73468, .F. ) ; +#14055 = ORIENTED_EDGE ( 'NONE', *, *, #52510, .F. ) ; +#14056 = AXIS2_PLACEMENT_3D ( 'NONE', #37137, #80677, #43392 ) ; +#14057 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#14058 = EDGE_LOOP ( 'NONE', ( #52269, #48898, #9691, #45424 ) ) ; +#14059 = EDGE_CURVE ( 'NONE', #49739, #19435, #67119, .T. ) ; +#14060 = CONICAL_SURFACE ( 'NONE', #21014, 10.50000000000009600, 0.7853981633974500600 ) ; +#14061 = AXIS2_PLACEMENT_3D ( 'NONE', #23609, #42070, #17338 ) ; +#14062 = AXIS2_PLACEMENT_3D ( 'NONE', #26756, #39222, #1962 ) ; +#14063 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59671, #16139, #28697, #72184 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.025402005079455600E-016, 0.001179148174662867400 ), + .UNSPECIFIED. ) ; +#14064 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 14.05000000000000200, -28.20555803802992800 ) ) ; +#14065 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725289700, 24.55000000000000100, -28.20555803802994200 ) ) ; +#14066 = ADVANCED_FACE ( 'NONE', ( #13839 ), #26497, .F. ) ; +#14067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14068 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14069 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 41.67701665379185300, -28.20555803802996700 ) ) ; +#14070 = ORIENTED_EDGE ( 'NONE', *, *, #33905, .F. ) ; +#14071 = CARTESIAN_POINT ( 'NONE', ( -15.68514033016293600, 24.54999999999999700, -28.35375031073496300 ) ) ; +#14072 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .T. ) ; +#14073 = ORIENTED_EDGE ( 'NONE', *, *, #7330, .T. ) ; +#14074 = CONICAL_SURFACE ( 'NONE', #44974, 10.50000000000009600, 0.7853981633974482800 ) ; +#14075 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8535, #39831, #52302, #15084 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122927990800, 0.0007303749718165120300 ), + .UNSPECIFIED. ) ; +#14076 = AXIS2_PLACEMENT_3D ( 'NONE', #51088, #13891, #57392 ) ; +#14077 = CARTESIAN_POINT ( 'NONE', ( -15.51770601915500700, 8.964587961689979100, -28.65180968932673600 ) ) ; +#14078 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459498900, 89.08026449164323400, -28.70555803803006300 ) ) ; +#14079 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14080 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252843200, 18.13131911501858100, -28.51286550264478600 ) ) ; +#14081 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14083 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#14084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14085 = AXIS2_PLACEMENT_3D ( 'NONE', #1897, #26965, #57946 ) ; +#14086 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 10.66666666666667100, -8.133761268305512700 ) ) ; +#14087 = FACE_OUTER_BOUND ( 'NONE', #23253, .T. ) ; +#14088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14089 = PLANE ( 'NONE', #74347 ) ; +#14090 = CARTESIAN_POINT ( 'NONE', ( -9.677527484459407200, 9.342828874293916300, -28.51468825946483000 ) ) ; +#14091 = ORIENTED_EDGE ( 'NONE', *, *, #64928, .T. ) ; +#14092 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14094 = AXIS2_PLACEMENT_3D ( 'NONE', #68498, #37449, #24980 ) ; +#14095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14096 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14097 = ORIENTED_EDGE ( 'NONE', *, *, #41657, .T. ) ; +#14098 = PLANE ( 'NONE', #60551 ) ; +#14099 = EDGE_LOOP ( 'NONE', ( #43958, #34101, #58614, #26034 ) ) ; +#14100 = EDGE_CURVE ( 'NONE', #34478, #75678, #59581, .T. ) ; +#14101 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492517100, 10.52620220503753700, -28.70555803803025800 ) ) ; +#14102 = FACE_OUTER_BOUND ( 'NONE', #31978, .T. ) ; +#14103 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14104 = FACE_OUTER_BOUND ( 'NONE', #1933, .T. ) ; +#14105 = AXIS2_PLACEMENT_3D ( 'NONE', #37277, #43532, #24539 ) ; +#14106 = ORIENTED_EDGE ( 'NONE', *, *, #8565, .T. ) ; +#14107 = CONICAL_SURFACE ( 'NONE', #74039, 10.50000000000009400, 0.7853981633974500600 ) ; +#14108 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 69.28967419478925600, -28.59353418718928100 ) ) ; +#14109 = CIRCLE ( 'NONE', #34053, 9.500000000000099500 ) ; +#14111 = ORIENTED_EDGE ( 'NONE', *, *, #29446, .T. ) ; +#14110 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 11.09027028261002800, -28.70555803802993500 ) ) ; +#14112 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 41.07757630314204500, -28.53861367218592800 ) ) ; +#14113 = VERTEX_POINT ( 'NONE', #14790 ) ; +#14114 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14115 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285711700, 33.17681279774499400, -28.70555803802996700 ) ) ; +#14116 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2250, #39524, #8498, #52002 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025910500, 0.0006251342085521129300 ), + .UNSPECIFIED. ) ; +#14117 = ADVANCED_FACE ( 'NONE', ( #42994 ), #57604, .T. ) ; +#14118 = CONICAL_SURFACE ( 'NONE', #62793, 10.00000000000009600, 0.7853981633974447300 ) ; +#14119 = EDGE_LOOP ( 'NONE', ( #75880, #78535, #36968, #11795, #17584, #67065 ) ) ; +#14120 = FACE_OUTER_BOUND ( 'NONE', #37225, .T. ) ; +#14121 = EDGE_CURVE ( 'NONE', #24570, #35462, #74184, .T. ) ; +#14122 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14123 = ORIENTED_EDGE ( 'NONE', *, *, #10331, .F. ) ; +#14124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14125 = ORIENTED_EDGE ( 'NONE', *, *, #43207, .F. ) ; +#14126 = EDGE_CURVE ( 'NONE', #27795, #39193, #61538, .T. ) ; +#14127 = ORIENTED_EDGE ( 'NONE', *, *, #18270, .T. ) ; +#14128 = ORIENTED_EDGE ( 'NONE', *, *, #26893, .F. ) ; +#14129 = ADVANCED_FACE ( 'NONE', ( #28467 ), #72231, .F. ) ; +#14130 = CYLINDRICAL_SURFACE ( 'NONE', #77225, 10.00000000000000200 ) ; +#14131 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 54.33333333333333600, -5.535685056952199400 ) ) ; +#14132 = ORIENTED_EDGE ( 'NONE', *, *, #80522, .T. ) ; +#14133 = VERTEX_POINT ( 'NONE', #15339 ) ; +#14134 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.80000000000008600, -28.70555803802994200 ) ) ; +#14135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14136 = EDGE_CURVE ( 'NONE', #47046, #20694, #44909, .T. ) ; +#14137 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14138 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 19.33333333333334600, -8.133761268305512700 ) ) ; +#14139 = EDGE_CURVE ( 'NONE', #65068, #71797, #52620, .T. ) ; +#14140 = VERTEX_POINT ( 'NONE', #27872 ) ; +#14141 = CYLINDRICAL_SURFACE ( 'NONE', #70141, 7.500000000000000000 ) ; +#14142 = AXIS2_PLACEMENT_3D ( 'NONE', #49205, #55488, #48938 ) ; +#14143 = CARTESIAN_POINT ( 'NONE', ( -3.778842085587709800, 41.43523632220588100, -28.30315276798567200 ) ) ; +#14144 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14145 = ORIENTED_EDGE ( 'NONE', *, *, #52718, .F. ) ; +#14146 = ORIENTED_EDGE ( 'NONE', *, *, #17828, .F. ) ; +#14147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14149 = ADVANCED_FACE ( 'NONE', ( #7946, #80016 ), #58843, .T. ) ; +#14150 = CIRCLE ( 'NONE', #52248, 10.00000000000009600 ) ; +#14151 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 56.66666666666667100, 4.294441961969993400 ) ) ; +#14152 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10711, #78993, #72731, #54202 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213613500400E-007, 0.0008724366121414556700 ), + .UNSPECIFIED. ) ; +#14153 = CARTESIAN_POINT ( 'NONE', ( -16.34768037227507500, 92.94768037227508700, -28.61432978906881200 ) ) ; +#14154 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14155 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39763, #2488, #58543, #21287 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390012246100E-007, 0.0008082646680356916000 ), + .UNSPECIFIED. ) ; +#14156 = AXIS2_PLACEMENT_3D ( 'NONE', #57676, #39155, #70177 ) ; +#14157 = EDGE_CURVE ( 'NONE', #49071, #60721, #9923, .T. ) ; +#14158 = EDGE_CURVE ( 'NONE', #66928, #50891, #55646, .T. ) ; +#14159 = EDGE_CURVE ( 'NONE', #22562, #26455, #38151, .T. ) ; +#14160 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155513200, 65.79999999999968500, -28.20555803803030800 ) ) ; +#14161 = ADVANCED_FACE ( 'NONE', ( #24519 ), #20627, .F. ) ; +#14162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14163 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274727600, 14.36787096422378900, -28.37244029424742600 ) ) ; +#14164 = PLANE ( 'NONE', #34793 ) ; +#14165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14166 = AXIS2_PLACEMENT_3D ( 'NONE', #22884, #41364, #60155 ) ; +#14167 = CIRCLE ( 'NONE', #7380, 9.500000000000097700 ) ; +#14168 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 81.43945992495515900, -28.34042301926901400 ) ) ; +#14169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14171 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17765, #54998, #67521, #30292 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674160448900E-007, 0.0007987728781051876300 ), + .UNSPECIFIED. ) ; +#14172 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390793500, 46.18533208989806100, -28.53910738522645500 ) ) ; +#14173 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 85.79999999999996900, -28.70555803802997700 ) ) ; +#14174 = EDGE_CURVE ( 'NONE', #75825, #12163, #23749, .T. ) ; +#14176 = ORIENTED_EDGE ( 'NONE', *, *, #27758, .F. ) ; +#14175 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14177 = CONICAL_SURFACE ( 'NONE', #22323, 10.50000000000009600, 0.7853981633974518300 ) ; +#14178 = AXIS2_PLACEMENT_3D ( 'NONE', #54231, #16984, #60526 ) ; +#14179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14180 = AXIS2_PLACEMENT_3D ( 'NONE', #72573, #35322, #78828 ) ; +#14181 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956800, 61.96823913367188700, -28.70555803803030800 ) ) ; +#14182 = ORIENTED_EDGE ( 'NONE', *, *, #3766, .F. ) ; +#14183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14186 = CONICAL_SURFACE ( 'NONE', #22373, 10.50000000000009600, 0.7853981633974500600 ) ; +#14187 = CIRCLE ( 'NONE', #77807, 10.50000000000009600 ) ; +#14188 = ORIENTED_EDGE ( 'NONE', *, *, #28824, .F. ) ; +#14189 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 60.16666666666668600, 0.9380355014189834000 ) ) ; +#14190 = FACE_OUTER_BOUND ( 'NONE', #37678, .T. ) ; +#14191 = ORIENTED_EDGE ( 'NONE', *, *, #25090, .T. ) ; +#14192 = ORIENTED_EDGE ( 'NONE', *, *, #25728, .F. ) ; +#14193 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 80.13716795162659400, -28.48697406221667400 ) ) ; +#14194 = AXIS2_PLACEMENT_3D ( 'NONE', #28433, #71922, #34657 ) ; +#14195 = CARTESIAN_POINT ( 'NONE', ( 4.118935526109045700, 90.49763722318489600, -28.32100408376091800 ) ) ; +#14196 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 26.20389005397394700, -28.37519436813180100 ) ) ; +#14197 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14198 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62965, #19425, #75452, #38159 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711325393300E-007, 0.0008482615949373574100 ), + .UNSPECIFIED. ) ; +#14199 = TOROIDAL_SURFACE ( 'NONE', #2947, 2.499999999999999600, 5.000000000000000000 ) ; +#14200 = CIRCLE ( 'NONE', #75747, 9.500000000000101300 ) ; +#14201 = AXIS2_PLACEMENT_3D ( 'NONE', #57865, #26876, #33117 ) ; +#14202 = ORIENTED_EDGE ( 'NONE', *, *, #5937, .T. ) ; +#14203 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#14204 = EDGE_LOOP ( 'NONE', ( #70889, #55924, #24599, #15667, #69344 ) ) ; +#14205 = EDGE_CURVE ( 'NONE', #57892, #1355, #9240, .T. ) ; +#14206 = EDGE_LOOP ( 'NONE', ( #74405, #40982, #35819, #41017 ) ) ; +#14207 = AXIS2_PLACEMENT_3D ( 'NONE', #78214, #3661, #47161 ) ; +#14208 = ORIENTED_EDGE ( 'NONE', *, *, #24609, .F. ) ; +#14209 = CARTESIAN_POINT ( 'NONE', ( -17.06581962135469200, 17.09136393618547300, -28.49020639256002600 ) ) ; +#14210 = EDGE_LOOP ( 'NONE', ( #33513, #77615, #66138, #3180, #18415, #49454, #6486, #46551, #47997, #11481, #8005, #55790, #31044, #14423, #49564, #44390, #48829, #16394, #78633, #35623, #2955, #45978, #57129, #13783, #51782, #63217, #51815, #64167, #9302, #77974, #14358, #33640, #17045, #10997, #10903, #40494, #17821 ) ) ; +#14211 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 25.33333333333333900, -5.205558038030008400 ) ) ; +#14212 = CARTESIAN_POINT ( 'NONE', ( -17.23701223182905600, 30.31227583396991700, -28.45214906810760200 ) ) ; +#14213 = CIRCLE ( 'NONE', #68753, 10.50000000000009600 ) ; +#14214 = AXIS2_PLACEMENT_3D ( 'NONE', #36482, #61552, #80028 ) ; +#14215 = ORIENTED_EDGE ( 'NONE', *, *, #21158, .T. ) ; +#14216 = VERTEX_POINT ( 'NONE', #36017 ) ; +#14217 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14218 = ADVANCED_FACE ( 'NONE', ( #41064 ), #68296, .T. ) ; +#14219 = FACE_OUTER_BOUND ( 'NONE', #71302, .T. ) ; +#14220 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533308100, 38.80869142985027800, -28.37223374938522700 ) ) ; +#14221 = VERTEX_POINT ( 'NONE', #4994 ) ; +#14222 = CIRCLE ( 'NONE', #79351, 10.00000000000009400 ) ; +#14223 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14224 = ADVANCED_FACE ( 'NONE', ( #51705 ), #35239, .F. ) ; +#14225 = CARTESIAN_POINT ( 'NONE', ( 14.89966555183941700, 60.79999999999999000, -28.20555803802987100 ) ) ; +#14226 = ORIENTED_EDGE ( 'NONE', *, *, #21456, .T. ) ; +#14227 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040098600, 87.94142842854279300, -28.37229765499293100 ) ) ; +#14228 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, -3.333333333333323300, 8.320721403598824400 ) ) ; +#14229 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 61.96823913367206400, -28.70555803802997700 ) ) ; +#14230 = EDGE_CURVE ( 'NONE', #67158, #14733, #75569, .T. ) ; +#14231 = CONICAL_SURFACE ( 'NONE', #72003, 10.50000000000009600, 0.7853981633974500600 ) ; +#14232 = ORIENTED_EDGE ( 'NONE', *, *, #38261, .F. ) ; +#14233 = ADVANCED_FACE ( 'NONE', ( #70231 ), #36271, .T. ) ; +#14234 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807171300, 64.79999999999999700, -28.70555803802997700 ) ) ; +#14235 = EDGE_CURVE ( 'NONE', #31582, #67193, #61152, .T. ) ; +#14236 = CIRCLE ( 'NONE', #22266, 10.00000000000009400 ) ; +#14237 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76818, #33300, #14807, #58327 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549226006400E-007, 0.0008759529789574111700 ), + .UNSPECIFIED. ) ; +#14238 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#14239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14240 = ORIENTED_EDGE ( 'NONE', *, *, #79797, .F. ) ; +#14241 = CIRCLE ( 'NONE', #39460, 9.500000000000099500 ) ; +#14242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14243 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343035100, 80.65007990305429100, -28.43638873268705300 ) ) ; +#14244 = EDGE_CURVE ( 'NONE', #31582, #34788, #4071, .T. ) ; +#14245 = ORIENTED_EDGE ( 'NONE', *, *, #20578, .F. ) ; +#14246 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14247 = ADVANCED_FACE ( 'NONE', ( #6024 ), #49762, .F. ) ; +#14248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14250 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#14251 = CIRCLE ( 'NONE', #6174, 10.00000000000009600 ) ; +#14252 = CIRCLE ( 'NONE', #28295, 10.00000000000009400 ) ; +#14253 = EDGE_CURVE ( 'NONE', #69992, #40694, #46622, .T. ) ; +#14254 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 31.16666666666667100, -6.205558038030004800 ) ) ; +#14255 = ORIENTED_EDGE ( 'NONE', *, *, #29492, .T. ) ; +#14256 = EDGE_CURVE ( 'NONE', #55227, #50435, #32196, .T. ) ; +#14257 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041000, 77.94142842854287800, -28.20555803803047800 ) ) ; +#14258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14259 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#14260 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820193800, 39.08258585630878900, -28.27509349209129000 ) ) ; +#14261 = ORIENTED_EDGE ( 'NONE', *, *, #74300, .T. ) ; +#14262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14264 = ORIENTED_EDGE ( 'NONE', *, *, #14273, .F. ) ; +#14265 = ADVANCED_FACE ( 'NONE', ( #2094 ), #16715, .T. ) ; +#14266 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14267 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14268 = AXIS2_PLACEMENT_3D ( 'NONE', #62349, #68597, #31349 ) ; +#14269 = CARTESIAN_POINT ( 'NONE', ( -9.452258779923843300, 42.28032162676817800, -28.55467576047084700 ) ) ; +#14270 = EDGE_CURVE ( 'NONE', #20304, #76859, #17756, .T. ) ; +#14271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14272 = EDGE_CURVE ( 'NONE', #40874, #47697, #53699, .T. ) ; +#14273 = EDGE_CURVE ( 'NONE', #39630, #24328, #66369, .T. ) ; +#14274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14275 = FACE_OUTER_BOUND ( 'NONE', #20623, .T. ) ; +#14276 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14278 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14279 = ORIENTED_EDGE ( 'NONE', *, *, #36703, .F. ) ; +#14280 = AXIS2_PLACEMENT_3D ( 'NONE', #53941, #16696, #60226 ) ; +#14281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14283 = ORIENTED_EDGE ( 'NONE', *, *, #48513, .F. ) ; +#14284 = EDGE_LOOP ( 'NONE', ( #37777, #22855, #17698 ) ) ; +#14285 = ORIENTED_EDGE ( 'NONE', *, *, #78, .T. ) ; +#14286 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310635600, 71.49769010897038900, -28.61774594594309600 ) ) ; +#14287 = ORIENTED_EDGE ( 'NONE', *, *, #42809, .T. ) ; +#14288 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#14289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14290 = FACE_OUTER_BOUND ( 'NONE', #38619, .T. ) ; +#14291 = AXIS2_PLACEMENT_3D ( 'NONE', #69091, #44020, #50279 ) ; +#14292 = AXIS2_PLACEMENT_3D ( 'NONE', #27926, #77386, #3115 ) ; +#14293 = VERTEX_POINT ( 'NONE', #62113 ) ; +#14294 = AXIS2_PLACEMENT_3D ( 'NONE', #9735, #15995, #46962 ) ; +#14295 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462478800, 70.20590598242374400, -28.39369363572359400 ) ) ; +#14296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61677, #18134, #67912, #30661 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722430117000E-007, 0.0002592600401783492400 ), + .UNSPECIFIED. ) ; +#14298 = ORIENTED_EDGE ( 'NONE', *, *, #3933, .F. ) ; +#14299 = CIRCLE ( 'NONE', #41916, 9.500000000000097700 ) ; +#14300 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67392, #30174, #55138, #17895 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0006572246343146353000 ), + .UNSPECIFIED. ) ; +#14301 = ORIENTED_EDGE ( 'NONE', *, *, #44779, .F. ) ; +#14302 = CONICAL_SURFACE ( 'NONE', #75637, 10.50000000000009600, 0.7853981633974500600 ) ; +#14303 = CARTESIAN_POINT ( 'NONE', ( -15.31403449022167600, 24.54999999999998600, -28.37321477197628600 ) ) ; +#14304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46822, #21586, #59367, #22111 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459156268555900E-007, 0.0007679767755142057700 ), + .UNSPECIFIED. ) ; +#14305 = CONICAL_SURFACE ( 'NONE', #13170, 10.50000000000009600, 0.7853981633974500600 ) ; +#14306 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 2.666666666666682100, -3.705558038030004400 ) ) ; +#14307 = AXIS2_PLACEMENT_3D ( 'NONE', #298, #31869, #6829 ) ; +#14308 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146655300, 41.79130857014957500, -28.37223374938508900 ) ) ; +#14309 = ORIENTED_EDGE ( 'NONE', *, *, #53223, .F. ) ; +#14310 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656722600, 49.85339758437807900, -28.20555803802996700 ) ) ; +#14311 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489654800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#14312 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56887, #13396, #75643, #38355 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559715107647100E-007, 0.0005869108620980719200 ), + .UNSPECIFIED. ) ; +#14313 = CIRCLE ( 'NONE', #68281, 9.500000000000095900 ) ; +#14314 = ORIENTED_EDGE ( 'NONE', *, *, #14380, .T. ) ; +#14315 = EDGE_CURVE ( 'NONE', #6922, #70845, #3259, .T. ) ; +#14316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14317 = AXIS2_PLACEMENT_3D ( 'NONE', #62534, #25271, #68779 ) ; +#14318 = EDGE_LOOP ( 'NONE', ( #23534, #34982, #45172, #16566 ) ) ; +#14319 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034432000, 41.67701665379240000, -28.20555803802997400 ) ) ; +#14320 = ORIENTED_EDGE ( 'NONE', *, *, #23419, .T. ) ; +#14321 = ORIENTED_EDGE ( 'NONE', *, *, #46508, .T. ) ; +#14322 = ORIENTED_EDGE ( 'NONE', *, *, #6503, .T. ) ; +#14323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14326 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#14327 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#14328 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656713800, 18.35339758437810100, -28.20555803802992800 ) ) ; +#14329 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873300200, 51.70803673496191500, -28.29033182162404400 ) ) ; +#14330 = AXIS2_PLACEMENT_3D ( 'NONE', #39230, #20498, #76497 ) ; +#14331 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14332 = CONICAL_SURFACE ( 'NONE', #23454, 10.00000000000009200, 0.7853981633974447300 ) ; +#14333 = ORIENTED_EDGE ( 'NONE', *, *, #55952, .F. ) ; +#14334 = ADVANCED_FACE ( 'NONE', ( #18669 ), #31323, .T. ) ; +#14335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14336 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 12.87738371066728000, -28.70555803802994200 ) ) ; +#14337 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10310, #47528, #22822, #66342 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632873791000E-007, 0.0008082706238600306200 ), + .UNSPECIFIED. ) ; +#14338 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#14339 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14340 = ADVANCED_FACE ( 'NONE', ( #33251 ), #79023, .T. ) ; +#14341 = VERTEX_POINT ( 'NONE', #68630 ) ; +#14342 = AXIS2_PLACEMENT_3D ( 'NONE', #63393, #26130, #69614 ) ; +#14343 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68745, #18965, #37712, #461 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735986244900E-007, 0.0006896863566006071300 ), + .UNSPECIFIED. ) ; +#14344 = ADVANCED_FACE ( 'NONE', ( #47823 ), #45864, .T. ) ; +#14345 = CONICAL_SURFACE ( 'NONE', #53112, 10.50000000000009600, 0.7853981633974500600 ) ; +#14346 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274710100, 24.55000000000000100, -28.20555803802994200 ) ) ; +#14347 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14348 = CIRCLE ( 'NONE', #14180, 9.500000000000099500 ) ; +#14349 = ORIENTED_EDGE ( 'NONE', *, *, #78969, .F. ) ; +#14350 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 33.15857157145700300, -28.20555803802996700 ) ) ; +#14351 = EDGE_CURVE ( 'NONE', #56550, #53626, #62460, .T. ) ; +#14352 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 8.500000000000008900, 4.650848422521016300 ) ) ; +#14353 = EDGE_LOOP ( 'NONE', ( #12735, #31318, #37686, #17801 ) ) ; +#14354 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14356 = ORIENTED_EDGE ( 'NONE', *, *, #7776, .F. ) ; +#14357 = VERTEX_POINT ( 'NONE', #43833 ) ; +#14358 = ORIENTED_EDGE ( 'NONE', *, *, #80069, .T. ) ; +#14359 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019288400, 86.79999999999944300, -28.70555803803047500 ) ) ; +#14360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14362 = ORIENTED_EDGE ( 'NONE', *, *, #76290, .F. ) ; +#14361 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14363 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217499100, 90.16054007504419600, -28.34042301926922700 ) ) ; +#14364 = ORIENTED_EDGE ( 'NONE', *, *, #20441, .F. ) ; +#14365 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972577900, 72.22511094383835900, -28.55192314908416400 ) ) ; +#14366 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14367 = CIRCLE ( 'NONE', #49162, 9.500000000000099500 ) ; +#14368 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458393800, 29.08874248361071600, -28.53740755999534400 ) ) ; +#14369 = EDGE_CURVE ( 'NONE', #54333, #71478, #69585, .T. ) ; +#14370 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#14372 = EDGE_CURVE ( 'NONE', #12566, #39894, #55122, .T. ) ; +#14371 = ORIENTED_EDGE ( 'NONE', *, *, #9856, .F. ) ; +#14373 = ORIENTED_EDGE ( 'NONE', *, *, #2178, .T. ) ; +#14374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14375 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571423300, 15.92318720225443100, -28.70555803803042500 ) ) ; +#14376 = FACE_OUTER_BOUND ( 'NONE', #56830, .T. ) ; +#14377 = AXIS2_PLACEMENT_3D ( 'NONE', #53923, #4164, #10427 ) ; +#14378 = EDGE_CURVE ( 'NONE', #50291, #2378, #64433, .T. ) ; +#14379 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498185000, 81.60172914845360000, -28.24094723680244800 ) ) ; +#14380 = EDGE_CURVE ( 'NONE', #23256, #20051, #155, .T. ) ; +#14381 = EDGE_CURVE ( 'NONE', #14357, #4437, #14757, .T. ) ; +#14382 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344544500, 10.17701665379220800, -28.20555803802993500 ) ) ; +#14383 = ORIENTED_EDGE ( 'NONE', *, *, #32607, .T. ) ; +#14384 = EDGE_CURVE ( 'NONE', #25994, #19993, #40661, .T. ) ; +#14385 = AXIS2_PLACEMENT_3D ( 'NONE', #58409, #52376, #70904 ) ; +#14386 = PLANE ( 'NONE', #63997 ) ; +#14387 = CONICAL_SURFACE ( 'NONE', #77109, 10.00000000000009200, 0.7853981633974447300 ) ; +#14389 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .F. ) ; +#14388 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67968, #18201, #80491, #43194 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.971191912782644700E-016, 0.001246264537621704300 ), + .UNSPECIFIED. ) ; +#14391 = ORIENTED_EDGE ( 'NONE', *, *, #53674, .T. ) ; +#14392 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000047300, 18.52242369685778600, -28.53861367218621200 ) ) ; +#14393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#14394 = CONICAL_SURFACE ( 'NONE', #7048, 10.00000000000009400, 0.7853981633974447300 ) ; +#14395 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 52.16666666666666400, 3.794441961969996900 ) ) ; +#14396 = AXIS2_PLACEMENT_3D ( 'NONE', #47990, #10773, #54272 ) ; +#14397 = AXIS2_PLACEMENT_3D ( 'NONE', #33327, #52052, #58076 ) ; +#14398 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14401 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 17.16666666666667100, 6.794441961969992500 ) ) ; +#14402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38449, #63263, #7453, #50954 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.001984222747274257600 ), + .UNSPECIFIED. ) ; +#14403 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#14404 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#14405 = CIRCLE ( 'NONE', #48919, 10.50000000000009600 ) ; +#14406 = ORIENTED_EDGE ( 'NONE', *, *, #8339, .F. ) ; +#14407 = CARTESIAN_POINT ( 'NONE', ( -16.33257079600104300, 25.12986017865679900, -28.62099087449130500 ) ) ; +#14408 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492443300, 18.70543520232829200, -28.70555803802992800 ) ) ; +#14409 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 54.50000000000001400, -9.258116921287651700 ) ) ; +#14410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14411 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052152700, 70.28233213024647300, -28.25051428653848600 ) ) ; +#14412 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 29.19949493661175700, -28.70555803802994200 ) ) ; +#14413 = ORIENTED_EDGE ( 'NONE', *, *, #22174, .F. ) ; +#14414 = AXIS2_PLACEMENT_3D ( 'NONE', #80738, #18462, #30983 ) ; +#14415 = EDGE_CURVE ( 'NONE', #12645, #30178, #26240, .T. ) ; +#14416 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50280, #19040, #62854, #25586 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001033575782259945400, 0.0004330091189930451100 ), + .UNSPECIFIED. ) ; +#14417 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14418 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459450000, 79.08026449164309200, -28.70555803803004500 ) ) ; +#14419 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 90.16749699759768100, -28.20555803802997700 ) ) ; +#14420 = FACE_OUTER_BOUND ( 'NONE', #28399, .T. ) ; +#14421 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14422 = CONICAL_SURFACE ( 'NONE', #45340, 10.00000000000009200, 0.7853981633974447300 ) ; +#14423 = ORIENTED_EDGE ( 'NONE', *, *, #73465, .T. ) ; +#14424 = ORIENTED_EDGE ( 'NONE', *, *, #7692, .F. ) ; +#14425 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14426 = EDGE_LOOP ( 'NONE', ( #22806, #38591, #16927, #40546 ) ) ; +#14427 = EDGE_CURVE ( 'NONE', #65153, #28510, #12830, .T. ) ; +#14428 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14429 = VERTEX_POINT ( 'NONE', #69408 ) ; +#14430 = ORIENTED_EDGE ( 'NONE', *, *, #11083, .F. ) ; +#14431 = CARTESIAN_POINT ( 'NONE', ( 11.45570038707807100, 9.030944946790951300, -28.65917496040402300 ) ) ; +#14432 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14433 = AXIS2_PLACEMENT_3D ( 'NONE', #5419, #17923, #42650 ) ; +#14434 = AXIS2_PLACEMENT_3D ( 'NONE', #4909, #73198, #23704 ) ; +#14435 = ORIENTED_EDGE ( 'NONE', *, *, #55999, .F. ) ; +#14436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14437 = ORIENTED_EDGE ( 'NONE', *, *, #54399, .F. ) ; +#14438 = ORIENTED_EDGE ( 'NONE', *, *, #10373, .F. ) ; +#14439 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567146100, 39.35339758437810100, -28.20555803802995200 ) ) ; +#14440 = ORIENTED_EDGE ( 'NONE', *, *, #27723, .T. ) ; +#14441 = CARTESIAN_POINT ( 'NONE', ( 16.53469939396887900, 9.232650303015562400, -28.58709120703529600 ) ) ; +#14442 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 50.54280755395588900, -28.45034744217088700 ) ) ; +#14443 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627467100, 15.93535825203913700, -28.53896444442239800 ) ) ; +#14444 = ADVANCED_FACE ( 'NONE', ( #29409 ), #75098, .F. ) ; +#14445 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#14446 = ORIENTED_EDGE ( 'NONE', *, *, #43093, .F. ) ; +#14447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30574, #43031, #61847, #24563 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405667992305300E-007, 0.0007670610367941027900 ), + .UNSPECIFIED. ) ; +#14448 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890718400, 18.47143078992715100, -28.37063977681164300 ) ) ; +#14449 = CARTESIAN_POINT ( 'NONE', ( 17.32922790642998500, 80.46872208558185900, -28.43092544535690500 ) ) ; +#14450 = FACE_OUTER_BOUND ( 'NONE', #60449, .T. ) ; +#14451 = AXIS2_PLACEMENT_3D ( 'NONE', #24114, #67619, #30384 ) ; +#14452 = ORIENTED_EDGE ( 'NONE', *, *, #58326, .T. ) ; +#14453 = VERTEX_POINT ( 'NONE', #1411 ) ; +#14454 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 58.00000000000000700, -1.205558038030005300 ) ) ; +#14455 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14456 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 67.94142842854297700, -28.20555803802997700 ) ) ; +#14457 = ORIENTED_EDGE ( 'NONE', *, *, #18561, .T. ) ; +#14458 = ORIENTED_EDGE ( 'NONE', *, *, #4232, .T. ) ; +#14459 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14460 = CIRCLE ( 'NONE', #40656, 10.50000000000009600 ) ; +#14461 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14463 = AXIS2_PLACEMENT_3D ( 'NONE', #67609, #49070, #11855 ) ; +#14464 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14465 = ORIENTED_EDGE ( 'NONE', *, *, #51712, .F. ) ; +#14466 = ADVANCED_FACE ( 'NONE', ( #22574 ), #41985, .F. ) ; +#14467 = EDGE_CURVE ( 'NONE', #6326, #4401, #11769, .T. ) ; +#14468 = CONICAL_SURFACE ( 'NONE', #73425, 10.00000000000009400, 0.7853981633974447300 ) ; +#14469 = EDGE_LOOP ( 'NONE', ( #71030, #53904, #32195, #13664 ) ) ; +#14470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14471 = ORIENTED_EDGE ( 'NONE', *, *, #39722, .T. ) ; +#14472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14473 = ORIENTED_EDGE ( 'NONE', *, *, #6741, .F. ) ; +#14474 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 23.16666666666667500, 0.9380355014189834000 ) ) ; +#14475 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 80.34267608797617300, -28.20555803803014400 ) ) ; +#14476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50473, #6726, #75274, #13277, #56763, #19522, #63044, #25791, #69274, #32029, #75528, #38242, #994, #44479, #7246, #50752 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 1, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2499999999996472800, 0.3749999999994643700, 0.4374999999993667300, 0.4687499999993241500, 0.4843749999993081100, 0.4921874999993008900, 0.4960937499992912900, 0.4999999999992817400, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#14478 = EDGE_CURVE ( 'NONE', #23151, #21775, #43918, .T. ) ; +#14479 = FACE_OUTER_BOUND ( 'NONE', #39654, .T. ) ; +#14480 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 70.90033558196090300, -28.70555803803014400 ) ) ; +#14481 = CONICAL_SURFACE ( 'NONE', #61973, 10.50000000000009600, 0.7853981633974500600 ) ; +#14482 = EDGE_CURVE ( 'NONE', #58834, #64449, #58542, .T. ) ; +#14483 = ORIENTED_EDGE ( 'NONE', *, *, #27265, .T. ) ; +#14484 = ORIENTED_EDGE ( 'NONE', *, *, #17423, .F. ) ; +#14485 = EDGE_CURVE ( 'NONE', #36791, #50398, #27431, .T. ) ; +#14486 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 46.96443389862718500, -28.54207364681941100 ) ) ; +#14487 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14488 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310633400, 61.49769010897038200, -28.61774594594310300 ) ) ; +#14489 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 66.66666666666670000, -8.133761268305512700 ) ) ; +#14490 = CIRCLE ( 'NONE', #65523, 10.00000000000009400 ) ; +#14492 = ORIENTED_EDGE ( 'NONE', *, *, #28980, .T. ) ; +#14491 = EDGE_CURVE ( 'NONE', #76599, #38042, #60520, .T. ) ; +#14493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77850, #71608, #71885, #34618 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723726700, 0.0008252574424211148600 ), + .UNSPECIFIED. ) ; +#14494 = CONICAL_SURFACE ( 'NONE', #54196, 10.00000000000009400, 0.7853981633974447300 ) ; +#14495 = ORIENTED_EDGE ( 'NONE', *, *, #67865, .T. ) ; +#14496 = AXIS2_PLACEMENT_3D ( 'NONE', #37285, #43538, #74590 ) ; +#14497 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000474700, 70.34510448120788300, -28.37193179497706900 ) ) ; +#14498 = VERTEX_POINT ( 'NONE', #51413 ) ; +#14499 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14500 = ORIENTED_EDGE ( 'NONE', *, *, #77453, .F. ) ; +#14501 = FACE_OUTER_BOUND ( 'NONE', #74551, .T. ) ; +#14502 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 65.92347538298001600, -28.70555803802997700 ) ) ; +#14503 = ORIENTED_EDGE ( 'NONE', *, *, #53932, .T. ) ; +#14504 = ORIENTED_EDGE ( 'NONE', *, *, #70799, .T. ) ; +#14505 = ORIENTED_EDGE ( 'NONE', *, *, #4271, .F. ) ; +#14506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14507 = VERTEX_POINT ( 'NONE', #26736 ) ; +#14508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14509 = ORIENTED_EDGE ( 'NONE', *, *, #6369, .F. ) ; +#14510 = AXIS2_PLACEMENT_3D ( 'NONE', #38173, #931, #44411 ) ; +#14511 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65583, #22049, #71823, #34562 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169438000, 0.001302223101367930900 ), + .UNSPECIFIED. ) ; +#14512 = EDGE_CURVE ( 'NONE', #49013, #29557, #77033, .T. ) ; +#14513 = EDGE_CURVE ( 'NONE', #28540, #47284, #25472, .T. ) ; +#14514 = ADVANCED_FACE ( 'NONE', ( #10874 ), #71187, .T. ) ; +#14515 = CARTESIAN_POINT ( 'NONE', ( -9.997971278275732800, 9.810914768184737500, -28.25432823872343500 ) ) ; +#14517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14516 = AXIS2_PLACEMENT_3D ( 'NONE', #29741, #73234, #35958 ) ; +#14518 = CARTESIAN_POINT ( 'NONE', ( -24.54878299176489900, 5.225608504117624300, -21.73852730698764200 ) ) ; +#14519 = CIRCLE ( 'NONE', #33910, 9.500000000000099500 ) ; +#14520 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124983300, 75.13282980700516600, -28.53914313452737900 ) ) ; +#14521 = VERTEX_POINT ( 'NONE', #58245 ) ; +#14522 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 29.00000000000001800, 3.794441961969998300 ) ) ; +#14523 = VERTEX_POINT ( 'NONE', #21013 ) ; +#14524 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 51.08083798124329200, -28.45106778992438000 ) ) ; +#14525 = VERTEX_POINT ( 'NONE', #64539 ) ; +#14526 = VERTEX_POINT ( 'NONE', #27273 ) ; +#14527 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#14528 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53907, #35187, #66445, #29220, #72703, #35450 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002153537998339423400, 0.004307075996678846700 ), + .UNSPECIFIED. ) ; +#14529 = VERTEX_POINT ( 'NONE', #70753 ) ; +#14530 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655678500, 28.42298334620757000, -28.20555803802994500 ) ) ; +#14531 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14532 = CARTESIAN_POINT ( 'NONE', ( -9.769188246343315300, 70.94994472024610800, -28.43636979168675400 ) ) ; +#14533 = CONICAL_SURFACE ( 'NONE', #67721, 10.00000000000009200, 0.7853981633974447300 ) ; +#14534 = EDGE_CURVE ( 'NONE', #55930, #61206, #78081, .T. ) ; +#14535 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957537400, 38.00972971738994500, -28.70555803802995600 ) ) ; +#14536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14537 = ADVANCED_FACE ( 'NONE', ( #8869 ), #38066, .T. ) ; +#14538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14539 = AXIS2_PLACEMENT_3D ( 'NONE', #28608, #72109, #34840 ) ; +#14540 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14541 = AXIS2_PLACEMENT_3D ( 'NONE', #57217, #7686, #75973 ) ; +#14542 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825387800, 71.43945992495515900, -28.34042301926901400 ) ) ; +#14543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#14544 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66592, #23080, #60358, #72853 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572499802300E-007, 0.0004669842289003624100 ), + .UNSPECIFIED. ) ; +#14545 = ORIENTED_EDGE ( 'NONE', *, *, #38533, .T. ) ; +#14546 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540436700, 69.08026449164336200, -28.70555803802997400 ) ) ; +#14547 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#14548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14549 = FACE_OUTER_BOUND ( 'NONE', #6073, .T. ) ; +#14550 = VERTEX_POINT ( 'NONE', #64807 ) ; +#14551 = ADVANCED_FACE ( 'NONE', ( #56582 ), #4999, .F. ) ; +#14552 = AXIS2_PLACEMENT_3D ( 'NONE', #35522, #53981, #16734 ) ; +#14553 = ORIENTED_EDGE ( 'NONE', *, *, #13119, .F. ) ; +#14554 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344323300, 17.92298334620759800, -28.20555803802994200 ) ) ; +#14555 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#14556 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819190700, 51.65075715145310700, -28.20555803802997700 ) ) ; +#14557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14558 = CARTESIAN_POINT ( 'NONE', ( 17.40887775794660200, 20.17956007225882300, -28.41154406527801500 ) ) ; +#14559 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856768900, 83.67681279774504300, -28.70555803802997700 ) ) ; +#14560 = ADVANCED_FACE ( 'NONE', ( #23513 ), #2725, .T. ) ; +#14561 = AXIS2_PLACEMENT_3D ( 'NONE', #13099, #7332, #50567 ) ; +#14562 = FACE_OUTER_BOUND ( 'NONE', #60092, .T. ) ; +#14563 = FACE_OUTER_BOUND ( 'NONE', #69378, .T. ) ; +#14564 = ORIENTED_EDGE ( 'NONE', *, *, #38890, .T. ) ; +#14565 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14566 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 0.5000000000000086600, 2.454695999814380200 ) ) ; +#14567 = AXIS2_PLACEMENT_3D ( 'NONE', #3074, #65417, #15618 ) ; +#14568 = VERTEX_POINT ( 'NONE', #77283 ) ; +#14569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5643, #69030, #38005, #741 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565737084354300E-007, 0.0002592140922085876800 ), + .UNSPECIFIED. ) ; +#14570 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14571 = EDGE_CURVE ( 'NONE', #35911, #24389, #6947, .T. ) ; +#14572 = CONICAL_SURFACE ( 'NONE', #45060, 10.50000000000009600, 0.7853981633974500600 ) ; +#14573 = ORIENTED_EDGE ( 'NONE', *, *, #71130, .T. ) ; +#14574 = FACE_OUTER_BOUND ( 'NONE', #8017, .T. ) ; +#14575 = VERTEX_POINT ( 'NONE', #15278 ) ; +#14576 = AXIS2_PLACEMENT_3D ( 'NONE', #77544, #40268, #3000 ) ; +#14577 = ORIENTED_EDGE ( 'NONE', *, *, #10260, .F. ) ; +#14578 = VECTOR ( 'NONE', #57359, 1000.000000000000000 ) ; +#14579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14580 = EDGE_LOOP ( 'NONE', ( #14606, #33465, #11768, #9740, #30365 ) ) ; +#14581 = ORIENTED_EDGE ( 'NONE', *, *, #59222, .F. ) ; +#14582 = EDGE_LOOP ( 'NONE', ( #768, #20686, #75431, #22317, #49680 ) ) ; +#14583 = EDGE_LOOP ( 'NONE', ( #51440, #72124, #17287 ) ) ; +#14584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14585 = EDGE_LOOP ( 'NONE', ( #52977, #36373, #47156, #79901, #26781 ) ) ; +#14586 = ORIENTED_EDGE ( 'NONE', *, *, #11907, .F. ) ; +#14587 = EDGE_LOOP ( 'NONE', ( #66422, #62944, #10917, #52524 ) ) ; +#14588 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995707800, 13.11903418172686400, -28.69431509262337000 ) ) ; +#14589 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#14590 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.62753447840815100, -28.38801640354867200 ) ) ; +#14591 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580928100, 21.73263087059573100, -28.67620115463453000 ) ) ; +#14592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14593 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970300, 63.65857157145682500, -28.20555803803047800 ) ) ; +#14594 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 74.83849307182666200, -28.68631150211663400 ) ) ; +#14595 = FACE_OUTER_BOUND ( 'NONE', #23633, .T. ) ; +#14597 = EDGE_LOOP ( 'NONE', ( #60228, #79380, #40412, #29234 ) ) ; +#14596 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#14598 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14600 = EDGE_CURVE ( 'NONE', #18101, #24812, #63638, .T. ) ; +#14599 = ORIENTED_EDGE ( 'NONE', *, *, #12998, .F. ) ; +#14601 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#14602 = EDGE_LOOP ( 'NONE', ( #60799, #67875, #62768, #32393, #48852 ) ) ; +#14603 = ORIENTED_EDGE ( 'NONE', *, *, #15208, .T. ) ; +#14604 = EDGE_CURVE ( 'NONE', #28981, #62491, #54643, .T. ) ; +#14605 = ORIENTED_EDGE ( 'NONE', *, *, #7752, .F. ) ; +#14606 = ORIENTED_EDGE ( 'NONE', *, *, #28593, .F. ) ; +#14607 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#14608 = CARTESIAN_POINT ( 'NONE', ( -10.57502447176283100, 92.18241614681682000, -28.70555803803002000 ) ) ; +#14609 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 55.79999999999999000, -28.20555803802997700 ) ) ; +#14610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14611 = FACE_OUTER_BOUND ( 'NONE', #29304, .T. ) ; +#14612 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3245, #40522, #9513, #53021 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839426241600 ), + .UNSPECIFIED. ) ; +#14613 = ORIENTED_EDGE ( 'NONE', *, *, #69536, .T. ) ; +#14614 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349246100, 19.89456479767167400, -28.70555803802994200 ) ) ; +#14615 = EDGE_CURVE ( 'NONE', #35532, #70927, #49110, .T. ) ; +#14616 = ORIENTED_EDGE ( 'NONE', *, *, #8776, .F. ) ; +#14617 = ADVANCED_FACE ( 'NONE', ( #40042 ), #3028, .F. ) ; +#14618 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#14619 = CARTESIAN_POINT ( 'NONE', ( 11.34855583513808200, 8.144909198926072200, -28.55411387316859600 ) ) ; +#14620 = EDGE_CURVE ( 'NONE', #32406, #59068, #19604, .T. ) ; +#14621 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783891200, 70.16749699759739700, -28.23966044827392700 ) ) ; +#14622 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#14623 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 6.333333333333343700, -5.205558038030008400 ) ) ; +#14624 = VECTOR ( 'NONE', #62981, 1000.000000000000000 ) ; +#14625 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 96.59999999999999400, 16.29444196196997700 ) ) ; +#14626 = ORIENTED_EDGE ( 'NONE', *, *, #46261, .T. ) ; +#14627 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71916, #28428, #9884, #53400 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610759600, 0.0004765929656974099700 ), + .UNSPECIFIED. ) ; +#14628 = ORIENTED_EDGE ( 'NONE', *, *, #43430, .F. ) ; +#14629 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 60.10230989102911500, -28.61774594594330900 ) ) ; +#14630 = ORIENTED_EDGE ( 'NONE', *, *, #70576, .T. ) ; +#14631 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#14632 = ADVANCED_FACE ( 'NONE', ( #36161 ), #34198, .T. ) ; +#14633 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019300500, 64.79999999999927200, -28.70555803803047500 ) ) ; +#14634 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14635 = AXIS2_PLACEMENT_3D ( 'NONE', #11055, #54559, #17298 ) ; +#14636 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 81.25732391202397800, -28.20555803802997700 ) ) ; +#14637 = EDGE_CURVE ( 'NONE', #38925, #11868, #50713, .T. ) ; +#14638 = EDGE_CURVE ( 'NONE', #30212, #17804, #52671, .T. ) ; +#14639 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459553500, 72.51973550835660400, -28.70555803802997700 ) ) ; +#14640 = EDGE_CURVE ( 'NONE', #53312, #4291, #34699, .T. ) ; +#14641 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14643 = CARTESIAN_POINT ( 'NONE', ( -5.883745263583234600, 24.54999999999999000, -28.53994725305374700 ) ) ; +#14644 = AXIS2_PLACEMENT_3D ( 'NONE', #55898, #62176, #68419 ) ; +#14645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14646 = CONICAL_SURFACE ( 'NONE', #62550, 10.50000000000009600, 0.7853981633974500600 ) ; +#14647 = ADVANCED_FACE ( 'NONE', ( #69243 ), #48755, .F. ) ; +#14648 = ORIENTED_EDGE ( 'NONE', *, *, #39625, .F. ) ; +#14649 = VERTEX_POINT ( 'NONE', #22603 ) ; +#14650 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14651 = EDGE_CURVE ( 'NONE', #15142, #20639, #21569, .T. ) ; +#14652 = AXIS2_PLACEMENT_3D ( 'NONE', #4595, #48080, #10869 ) ; +#14653 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65132, #40067, #34100, #77607 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854059800, 0.0007596411030280972600 ), + .UNSPECIFIED. ) ; +#14654 = ADVANCED_FACE ( 'NONE', ( #65378 ), #79949, .F. ) ; +#14655 = CIRCLE ( 'NONE', #70598, 10.00000000000009400 ) ; +#14656 = VERTEX_POINT ( 'NONE', #10368 ) ; +#14657 = ORIENTED_EDGE ( 'NONE', *, *, #71194, .F. ) ; +#14658 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548966000, 30.94069092601377900, -28.35186440610858200 ) ) ; +#14659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14660 = CONICAL_SURFACE ( 'NONE', #13106, 10.50000000000009600, 0.7853981633974500600 ) ; +#14661 = VERTEX_POINT ( 'NONE', #16618 ) ; +#14662 = ORIENTED_EDGE ( 'NONE', *, *, #50257, .F. ) ; +#14663 = CARTESIAN_POINT ( 'NONE', ( 10.36049707220281300, 20.43250300240229200, -28.25438406275897000 ) ) ; +#14665 = VERTEX_POINT ( 'NONE', #22875 ) ; +#14664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14666 = ORIENTED_EDGE ( 'NONE', *, *, #6389, .T. ) ; +#14667 = ADVANCED_FACE ( 'NONE', ( #1083 ), #46804, .F. ) ; +#14668 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 50.00000000000002100, -6.205558038030003100 ) ) ; +#14669 = AXIS2_PLACEMENT_3D ( 'NONE', #31268, #68785, #25006 ) ; +#14670 = CARTESIAN_POINT ( 'NONE', ( 6.346749369205376600E-015, 12.63556610137280200, -28.54207364681938600 ) ) ; +#14671 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45483, #57774, #14532, #58043 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191467814000E-007, 0.0006649560044143924300 ), + .UNSPECIFIED. ) ; +#14672 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 9.746602415621900700, -28.20555803802992800 ) ) ; +#14673 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 15.00000000000001400, -9.205558038030005700 ) ) ; +#14674 = AXIS2_PLACEMENT_3D ( 'NONE', #60717, #23444, #66970 ) ; +#14675 = ORIENTED_EDGE ( 'NONE', *, *, #50446, .F. ) ; +#14676 = CIRCLE ( 'NONE', #34885, 10.00000000000009400 ) ; +#14677 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000160800, 68.62623792124919900, -28.70555803803030800 ) ) ; +#14678 = ORIENTED_EDGE ( 'NONE', *, *, #49710, .F. ) ; +#14679 = ORIENTED_EDGE ( 'NONE', *, *, #39381, .F. ) ; +#14680 = EDGE_LOOP ( 'NONE', ( #68515, #7097, #5709, #65141, #61754, #22501 ) ) ; +#14681 = ORIENTED_EDGE ( 'NONE', *, *, #27152, .F. ) ; +#14682 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 52.33333333333334300, 8.320721403598817300 ) ) ; +#14683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14684 = ORIENTED_EDGE ( 'NONE', *, *, #62294, .F. ) ; +#14685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14686 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566730400, 35.04999999999997600, -28.70555803802995200 ) ) ; +#14687 = FACE_OUTER_BOUND ( 'NONE', #18812, .T. ) ; +#14688 = AXIS2_PLACEMENT_3D ( 'NONE', #17047, #60564, #23286 ) ; +#14689 = ORIENTED_EDGE ( 'NONE', *, *, #33665, .T. ) ; +#14690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14691 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 80.90033558196108700, -28.70555803802997700 ) ) ; +#14692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14693 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#14694 = ORIENTED_EDGE ( 'NONE', *, *, #77157, .T. ) ; +#14695 = AXIS2_PLACEMENT_3D ( 'NONE', #64609, #21350, #64881 ) ; +#14696 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14697 = CIRCLE ( 'NONE', #31618, 10.00000000000009200 ) ; +#14698 = VERTEX_POINT ( 'NONE', #78921 ) ; +#14699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14700 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45794, #21105, #39839, #2549 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099546579760600E-007, 0.0008759529789575333600 ), + .UNSPECIFIED. ) ; +#14701 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#14702 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 33.87738371066728100, -28.70555803802996700 ) ) ; +#14703 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14704 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#14705 = CARTESIAN_POINT ( 'NONE', ( 11.72239160521212200, 50.54999999999991200, -28.70555803803027900 ) ) ; +#14706 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14707 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14708 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14710 = EDGE_CURVE ( 'NONE', #2702, #58782, #17671, .T. ) ; +#14711 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 55.83333333333334300, -3.349151577478984600 ) ) ; +#14712 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 38.97246552159109700, -28.38801640354855800 ) ) ; +#14713 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660979200, 60.13716795162655200, -28.48697406221649300 ) ) ; +#14714 = EDGE_CURVE ( 'NONE', #16848, #7149, #20227, .T. ) ; +#14715 = VERTEX_POINT ( 'NONE', #47855 ) ; +#14716 = ORIENTED_EDGE ( 'NONE', *, *, #29216, .F. ) ; +#14717 = ORIENTED_EDGE ( 'NONE', *, *, #57875, .T. ) ; +#14718 = ADVANCED_FACE ( 'NONE', ( #67293 ), #77983, .F. ) ; +#14719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14720 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484631200, 80.58127875436078100, -28.53757464917597600 ) ) ; +#14721 = EDGE_CURVE ( 'NONE', #18570, #24421, #13778, .T. ) ; +#14722 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#14723 = EDGE_CURVE ( 'NONE', #27421, #25521, #5769, .T. ) ; +#14724 = CONICAL_SURFACE ( 'NONE', #76807, 10.00000000000009200, 0.7853981633974447300 ) ; +#14725 = ORIENTED_EDGE ( 'NONE', *, *, #1371, .T. ) ; +#14726 = ORIENTED_EDGE ( 'NONE', *, *, #60129, .T. ) ; +#14727 = EDGE_CURVE ( 'NONE', #62844, #50523, #30331, .T. ) ; +#14728 = ADVANCED_FACE ( 'NONE', ( #63407 ), #11813, .F. ) ; +#14729 = ORIENTED_EDGE ( 'NONE', *, *, #3508, .F. ) ; +#14730 = FACE_OUTER_BOUND ( 'NONE', #61889, .T. ) ; +#14731 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14732 = ORIENTED_EDGE ( 'NONE', *, *, #36100, .F. ) ; +#14733 = VERTEX_POINT ( 'NONE', #38456 ) ; +#14734 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063268300, 28.50210619075101400, -28.25343951603328200 ) ) ; +#14735 = ORIENTED_EDGE ( 'NONE', *, *, #4525, .F. ) ; +#14736 = ADVANCED_FACE ( 'NONE', ( #15702 ), #59497, .F. ) ; +#14737 = ORIENTED_EDGE ( 'NONE', *, *, #45283, .T. ) ; +#14738 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 21.00000000000001100, -1.205558038030005300 ) ) ; +#14739 = EDGE_LOOP ( 'NONE', ( #11849, #37616, #9088 ) ) ; +#14740 = AXIS2_PLACEMENT_3D ( 'NONE', #47206, #78256, #3705 ) ; +#14741 = FACE_OUTER_BOUND ( 'NONE', #52507, .T. ) ; +#14742 = EDGE_CURVE ( 'NONE', #49449, #48654, #76024, .T. ) ; +#14743 = CARTESIAN_POINT ( 'NONE', ( 10.51172152393778200, 9.414547318481419700, -28.68840635393010500 ) ) ; +#14744 = EDGE_CURVE ( 'NONE', #51716, #2326, #72117, .T. ) ; +#14745 = EDGE_CURVE ( 'NONE', #14525, #80692, #57616, .T. ) ; +#14746 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944343600, 17.80044153223009900, -28.38339015421954800 ) ) ; +#14747 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70895, #76893, #15146, #58651 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104972788500, 0.0007670610367940525900 ), + .UNSPECIFIED. ) ; +#14748 = ADVANCED_FACE ( 'NONE', ( #32247 ), #9846, .F. ) ; +#14749 = CONICAL_SURFACE ( 'NONE', #18678, 10.00000000000009400, 0.7853981633974447300 ) ; +#14750 = AXIS2_PLACEMENT_3D ( 'NONE', #62249, #6465, #68489 ) ; +#14751 = ORIENTED_EDGE ( 'NONE', *, *, #68403, .F. ) ; +#14752 = ORIENTED_EDGE ( 'NONE', *, *, #48663, .T. ) ; +#14753 = ORIENTED_EDGE ( 'NONE', *, *, #78647, .F. ) ; +#14754 = ORIENTED_EDGE ( 'NONE', *, *, #49588, .F. ) ; +#14755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14756 = ORIENTED_EDGE ( 'NONE', *, *, #80038, .F. ) ; +#14757 = CIRCLE ( 'NONE', #8088, 10.00000000000009400 ) ; +#14758 = AXIS2_PLACEMENT_3D ( 'NONE', #10484, #17004, #4481 ) ; +#14759 = AXIS2_PLACEMENT_3D ( 'NONE', #68251, #74521, #30742 ) ; +#14760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14761 = CARTESIAN_POINT ( 'NONE', ( -2.438065798940680200, 39.11613388835921500, -28.57723500840070900 ) ) ; +#14762 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965600, 28.65930907398619700, -28.35186440610856500 ) ) ; +#14763 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 64.50000000000001400, 4.650848422521016300 ) ) ; +#14764 = ORIENTED_EDGE ( 'NONE', *, *, #65974, .T. ) ; +#14765 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#14766 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14767 = CONICAL_SURFACE ( 'NONE', #46105, 10.00000000000009200, 0.7853981633974447300 ) ; +#14768 = ORIENTED_EDGE ( 'NONE', *, *, #78040, .T. ) ; +#14769 = CARTESIAN_POINT ( 'NONE', ( -2.545825865795343200, 94.27944769779099900, -28.35118195858168700 ) ) ; +#14770 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14771 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14773 = CARTESIAN_POINT ( 'NONE', ( -17.06616028005487000, 11.00593028296454500, -28.49013149708292000 ) ) ; +#14774 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718937800, 60.46231468379674100, -28.37082013777818500 ) ) ; +#14775 = AXIS2_PLACEMENT_3D ( 'NONE', #29884, #17324, #73364 ) ; +#14776 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14779 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14780 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#14781 = CARTESIAN_POINT ( 'NONE', ( -21.71236190568636500, 3.287638094313876500, -26.34782212000640900 ) ) ; +#14782 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 26.83333333333333600, -6.205558038030004800 ) ) ; +#14783 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 41.24660241562189400, -28.20555803802996700 ) ) ; +#14784 = EDGE_CURVE ( 'NONE', #61765, #62020, #43149, .T. ) ; +#14785 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14786 = VERTEX_POINT ( 'NONE', #45239 ) ; +#14787 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63549, #20023, #26291, #32508, #76025, #38725 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249975206000, 0.003859526499950412100 ), + .UNSPECIFIED. ) ; +#14788 = ORIENTED_EDGE ( 'NONE', *, *, #39265, .T. ) ; +#14789 = CARTESIAN_POINT ( 'NONE', ( 15.05232299489601600, 55.84127283767691100, -28.70545439276233800 ) ) ; +#14790 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801549800, 90.69966441803892100, -28.70555803803030800 ) ) ; +#14791 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999976600, -28.70555803803025800 ) ) ; +#14792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14793 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 39.13131911501876200, -28.51286550264508800 ) ) ; +#14794 = CARTESIAN_POINT ( 'NONE', ( -8.783306465195835200, 80.79999999999999700, -28.32841359973439000 ) ) ; +#14795 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851719400, 15.00238095238093400, -28.70555803803025800 ) ) ; +#14796 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#14797 = CARTESIAN_POINT ( 'NONE', ( -15.41232936306068500, 20.89604671417950100, -28.70555803803002000 ) ) ; +#14798 = CARTESIAN_POINT ( 'NONE', ( 0.8382359061003080700, 8.864092883706264900, -28.64083434776821600 ) ) ; +#14799 = CONICAL_SURFACE ( 'NONE', #73139, 10.50000000000009600, 0.7853981633974500600 ) ; +#14800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14801 = ORIENTED_EDGE ( 'NONE', *, *, #25480, .F. ) ; +#14802 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484952000, 52.31032580520978600, -28.59353418718928800 ) ) ; +#14803 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#14804 = CONICAL_SURFACE ( 'NONE', #26945, 10.00000000000009600, 0.7853981633974482800 ) ; +#14805 = AXIS2_PLACEMENT_3D ( 'NONE', #4598, #48082, #10872 ) ; +#14806 = ORIENTED_EDGE ( 'NONE', *, *, #75983, .F. ) ; +#14807 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 23.13556610137281700, -28.54207364681941100 ) ) ; +#14808 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386700, 30.93650294695131500, -28.30782889147482000 ) ) ; +#14809 = FACE_OUTER_BOUND ( 'NONE', #33211, .T. ) ; +#14810 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#14811 = ORIENTED_EDGE ( 'NONE', *, *, #66463, .F. ) ; +#14813 = EDGE_LOOP ( 'NONE', ( #65928, #22854, #60759, #8627 ) ) ; +#14812 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074376800, 17.31967837323415100, -28.55467576046954300 ) ) ; +#14814 = ORIENTED_EDGE ( 'NONE', *, *, #63972, .T. ) ; +#14815 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14816 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489639300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#14817 = ORIENTED_EDGE ( 'NONE', *, *, #67502, .F. ) ; +#14818 = CARTESIAN_POINT ( 'NONE', ( -4.467620260318217800, 94.26940775139536300, -28.34592507370791000 ) ) ; +#14819 = EDGE_LOOP ( 'NONE', ( #57198, #44634, #6438, #75089 ) ) ; +#14820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14821 = CARTESIAN_POINT ( 'NONE', ( -12.14815378900369700, 75.79999999999999700, -28.37148172714570600 ) ) ; +#14822 = CIRCLE ( 'NONE', #44145, 10.50000000000009200 ) ; +#14823 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14824 = ORIENTED_EDGE ( 'NONE', *, *, #33730, .T. ) ; +#14825 = CONICAL_SURFACE ( 'NONE', #27517, 10.00000000000009200, 0.7853981633974415100 ) ; +#14826 = EDGE_CURVE ( 'NONE', #35221, #19809, #73164, .T. ) ; +#14827 = VERTEX_POINT ( 'NONE', #26542 ) ; +#14828 = ORIENTED_EDGE ( 'NONE', *, *, #71954, .F. ) ; +#14829 = ORIENTED_EDGE ( 'NONE', *, *, #68301, .T. ) ; +#14830 = ORIENTED_EDGE ( 'NONE', *, *, #73509, .T. ) ; +#14831 = CARTESIAN_POINT ( 'NONE', ( 10.36059854261481300, 18.16749699759736800, -28.25434854811506800 ) ) ; +#14832 = CONICAL_SURFACE ( 'NONE', #40284, 10.00000000000009200, 0.7853981633974447300 ) ; +#14833 = VERTEX_POINT ( 'NONE', #57792 ) ; +#14834 = ADVANCED_FACE ( 'NONE', ( #42922 ), #40989, .T. ) ; +#14835 = CIRCLE ( 'NONE', #247, 9.500000000000099500 ) ; +#14836 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 70.49999999999995700, -7.061964498581016200 ) ) ; +#14837 = CARTESIAN_POINT ( 'NONE', ( 3.014248196869004000, 51.58005252438340400, -28.24986299608893200 ) ) ; +#14838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14839 = ADVANCED_FACE ( 'NONE', ( #44834 ), #61466, .T. ) ; +#14840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14841 = EDGE_CURVE ( 'NONE', #48902, #54306, #28751, .T. ) ; +#14842 = EDGE_CURVE ( 'NONE', #32984, #27266, #28394, .T. ) ; +#14843 = CIRCLE ( 'NONE', #32553, 9.500000000000099500 ) ; +#14844 = ORIENTED_EDGE ( 'NONE', *, *, #290, .T. ) ; +#14845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14846 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5877, #18382, #24632, #68147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721152300, 0.0008252574424209371600 ), + .UNSPECIFIED. ) ; +#14847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65949, #41171, #47393, #10180 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674075446500E-007, 0.0007987728781051947900 ), + .UNSPECIFIED. ) ; +#14849 = AXIS2_PLACEMENT_3D ( 'NONE', #38488, #75789, #13803 ) ; +#14850 = EDGE_CURVE ( 'NONE', #61551, #79940, #14237, .T. ) ; +#14851 = EDGE_CURVE ( 'NONE', #64055, #48534, #80562, .T. ) ; +#14852 = EDGE_CURVE ( 'NONE', #39151, #39956, #66123, .T. ) ; +#14853 = CARTESIAN_POINT ( 'NONE', ( 17.24306493325777700, 81.43482203710601700, -28.29548531139009200 ) ) ; +#14854 = ADVANCED_FACE ( 'NONE', ( #57535 ), #72150, .T. ) ; +#14855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14856 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000027000, 89.41684396980656400, -28.70555803803024400 ) ) ; +#14857 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 26.42318720225497900, -28.70555803802994200 ) ) ; +#14858 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372566800, 22.66464174796073300, -28.53896444442198900 ) ) ; +#14859 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 41.83333333333333600, 1.741883078712340300 ) ) ; +#14860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27850, #40314, #59093, #21840 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674731837289100E-007, 0.0006896863566000545100 ), + .UNSPECIFIED. ) ; +#14861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14862 = AXIS2_PLACEMENT_3D ( 'NONE', #68868, #31623, #75123 ) ; +#14863 = CARTESIAN_POINT ( 'NONE', ( -3.031785615621673800, 61.31767869357347700, -28.25052235028439500 ) ) ; +#14864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14865 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 51.43945992495533700, -28.34042301926881200 ) ) ; +#14866 = ORIENTED_EDGE ( 'NONE', *, *, #8889, .F. ) ; +#14867 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333100, 24.55000000000001500, -28.70555803802994200 ) ) ; +#14868 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#14869 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472516600, 14.04999999999928800, -28.20555803803042500 ) ) ; +#14870 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925651700, 17.31967837323419000, -28.55467576046951800 ) ) ; +#14871 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#14873 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .T. ) ; +#14872 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534557800, 40.60079448659599400, -28.70555803802996700 ) ) ; +#14874 = AXIS2_PLACEMENT_3D ( 'NONE', #13632, #57128, #19867 ) ; +#14875 = AXIS2_PLACEMENT_3D ( 'NONE', #5623, #49096, #11894 ) ; +#14876 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48870, #67940, #5936, #49403 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668727679600E-007, 0.0007987728781047483100 ), + .UNSPECIFIED. ) ; +#14877 = AXIS2_PLACEMENT_3D ( 'NONE', #61750, #24470, #67979 ) ; +#14878 = CARTESIAN_POINT ( 'NONE', ( 16.19858693502893100, 94.72249899919880500, -28.20555803803014400 ) ) ; +#14879 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999994000, 20.96823913367206400, -28.70555803802995200 ) ) ; +#14880 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511882000, 89.60439022488299100, -28.70555803803030800 ) ) ; +#14881 = FACE_OUTER_BOUND ( 'NONE', #55236, .T. ) ; +#14882 = EDGE_LOOP ( 'NONE', ( #10477, #18198, #4328, #48490, #15777, #43222, #20425 ) ) ; +#14883 = CARTESIAN_POINT ( 'NONE', ( -9.881064473890861100, 70.49763722318499500, -28.32100408376068400 ) ) ; +#14884 = CIRCLE ( 'NONE', #52383, 9.500000000000101300 ) ; +#14885 = ORIENTED_EDGE ( 'NONE', *, *, #74219, .F. ) ; +#14886 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 4.166666666666689200, 0.9380355014189834000 ) ) ; +#14887 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.66749699759768800, -28.20555803802994200 ) ) ; +#14888 = CARTESIAN_POINT ( 'NONE', ( 2.497924978448558400, 50.60145251508603800, -28.70555803802997700 ) ) ; +#14889 = ORIENTED_EDGE ( 'NONE', *, *, #60053, .F. ) ; +#14890 = FACE_OUTER_BOUND ( 'NONE', #56727, .T. ) ; +#14891 = ORIENTED_EDGE ( 'NONE', *, *, #27535, .T. ) ; +#14892 = ORIENTED_EDGE ( 'NONE', *, *, #44048, .T. ) ; +#14893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14894 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.932503002402292200, -28.20555803802994200 ) ) ; +#14895 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#14896 = VERTEX_POINT ( 'NONE', #64885 ) ; +#14897 = AXIS2_PLACEMENT_3D ( 'NONE', #65940, #28713, #72200 ) ; +#14898 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#14899 = EDGE_CURVE ( 'NONE', #19435, #19507, #51589, .T. ) ; +#14900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14901 = CONICAL_SURFACE ( 'NONE', #15496, 10.00000000000009200, 0.7853981633974447300 ) ; +#14902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11189, #4908, #60692, #17432 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646296700, 0.0009605145132142215400 ), + .UNSPECIFIED. ) ; +#14903 = CARTESIAN_POINT ( 'NONE', ( -10.98378260239420200, 7.259459441370619700, -28.33110170628422600 ) ) ; +#14904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14905 = CARTESIAN_POINT ( 'NONE', ( 16.68767301991506400, 87.07041105633018700, -28.56367862433809200 ) ) ; +#14906 = VERTEX_POINT ( 'NONE', #58590 ) ; +#14907 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 20.24660241562189400, -28.20555803802994200 ) ) ; +#14908 = CONICAL_SURFACE ( 'NONE', #15468, 10.00000000000009400, 0.7853981633974447300 ) ; +#14909 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14910 = ORIENTED_EDGE ( 'NONE', *, *, #26947, .F. ) ; +#14911 = EDGE_CURVE ( 'NONE', #54597, #41523, #26423, .T. ) ; +#14912 = ORIENTED_EDGE ( 'NONE', *, *, #69468, .T. ) ; +#14913 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143967300, 86.44146991525349200, -28.52629299565672800 ) ) ; +#14914 = AXIS2_PLACEMENT_3D ( 'NONE', #72129, #34858, #78378 ) ; +#14915 = ORIENTED_EDGE ( 'NONE', *, *, #67202, .F. ) ; +#14916 = EDGE_LOOP ( 'NONE', ( #423, #74214, #54138, #5084 ) ) ; +#14917 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274347600, 26.43535825203924700, -28.53896444442197500 ) ) ; +#14918 = CONICAL_SURFACE ( 'NONE', #35661, 10.50000000000009600, 0.7853981633974518300 ) ; +#14919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14920 = CARTESIAN_POINT ( 'NONE', ( 2.621978672527905300, 18.13131911501857000, -28.51286550264531900 ) ) ; +#14921 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14922 = ADVANCED_FACE ( 'NONE', ( #7868 ), #70159, .T. ) ; +#14923 = ORIENTED_EDGE ( 'NONE', *, *, #19174, .T. ) ; +#14924 = AXIS2_PLACEMENT_3D ( 'NONE', #19328, #62336, #549 ) ; +#14925 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#14926 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.10252595950238300, -28.26641963845882100 ) ) ; +#14927 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528200, 45.86787096422378300, -28.37244029424746100 ) ) ; +#14928 = ORIENTED_EDGE ( 'NONE', *, *, #22864, .T. ) ; +#14929 = CONICAL_SURFACE ( 'NONE', #80529, 10.00000000000009400, 0.7853981633974447300 ) ; +#14930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14931 = ADVANCED_FACE ( 'NONE', ( #22497 ), #37062, .T. ) ; +#14932 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 47.83333333333334300, 3.794441961969996900 ) ) ; +#14933 = AXIS2_PLACEMENT_3D ( 'NONE', #51893, #14685, #58185 ) ; +#14934 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919845600, 17.91070809551067100, -28.20555803803025800 ) ) ; +#14935 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.87738371066727800, -28.70555803802994200 ) ) ; +#14936 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 70.07141756547892400, -28.70555803802997700 ) ) ; +#14937 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 12.83333333333334300, 6.794441961969992500 ) ) ; +#14938 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.36762008758023500, -28.26633708900912000 ) ) ; +#14939 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540436700, 52.51973550835660400, -28.70555803802997400 ) ) ; +#14940 = EDGE_CURVE ( 'NONE', #4187, #54740, #37150, .T. ) ; +#14941 = LINE ( 'NONE', #70959, #29572 ) ; +#14942 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#14943 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 50.16666666666666400, -12.20555803803000000 ) ) ; +#14944 = CARTESIAN_POINT ( 'NONE', ( 11.46986311118992000, 9.146957350529865100, -28.66910751791844400 ) ) ; +#14945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14947 = ORIENTED_EDGE ( 'NONE', *, *, #12475, .T. ) ; +#14948 = VERTEX_POINT ( 'NONE', #65429 ) ; +#14949 = ORIENTED_EDGE ( 'NONE', *, *, #18074, .F. ) ; +#14950 = ADVANCED_FACE ( 'NONE', ( #53629 ), #3980, .F. ) ; +#14951 = PLANE ( 'NONE', #52049 ) ; +#14952 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#14953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3489, #52995, #71795, #9776 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936610500, 0.0005776948474817061400 ), + .UNSPECIFIED. ) ; +#14954 = CIRCLE ( 'NONE', #44835, 9.500000000000097700 ) ; +#14955 = ORIENTED_EDGE ( 'NONE', *, *, #36187, .T. ) ; +#14956 = CONICAL_SURFACE ( 'NONE', #2833, 10.50000000000009200, 0.7853981633974482800 ) ; +#14957 = EDGE_CURVE ( 'NONE', #66490, #19594, #22720, .T. ) ; +#14958 = ORIENTED_EDGE ( 'NONE', *, *, #76002, .F. ) ; +#14959 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#14960 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#14961 = VECTOR ( 'NONE', #4514, 1000.000000000000000 ) ; +#14962 = CARTESIAN_POINT ( 'NONE', ( 3.628581783286471700, 90.16749699759769500, -28.25056166218025300 ) ) ; +#14963 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#14964 = ORIENTED_EDGE ( 'NONE', *, *, #67378, .F. ) ; +#14965 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#14966 = VERTEX_POINT ( 'NONE', #15882 ) ; +#14968 = ORIENTED_EDGE ( 'NONE', *, *, #72568, .T. ) ; +#14967 = CARTESIAN_POINT ( 'NONE', ( 7.374801051545778000, 50.54999999999999700, -28.45531454621837500 ) ) ; +#14969 = CARTESIAN_POINT ( 'NONE', ( 15.30966903806149100, 50.55000000000000400, -28.51520640151471000 ) ) ; +#14970 = AXIS2_PLACEMENT_3D ( 'NONE', #20198, #26474, #57457 ) ; +#14971 = EDGE_CURVE ( 'NONE', #35350, #50891, #8211, .T. ) ; +#14972 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#14973 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67262, #17506, #42490, #5252 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735832848800E-007, 0.0002745102201814128100 ), + .UNSPECIFIED. ) ; +#14974 = CIRCLE ( 'NONE', #73272, 9.500000000000099500 ) ; +#14975 = EDGE_CURVE ( 'NONE', #74377, #69491, #74582, .T. ) ; +#14976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14977 = ORIENTED_EDGE ( 'NONE', *, *, #7298, .F. ) ; +#14978 = AXIS2_PLACEMENT_3D ( 'NONE', #34750, #78255, #40991 ) ; +#14979 = FACE_OUTER_BOUND ( 'NONE', #33607, .T. ) ; +#14980 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 53.66666666666667900, 2.794441961969992100 ) ) ; +#14981 = ORIENTED_EDGE ( 'NONE', *, *, #19136, .F. ) ; +#14982 = CARTESIAN_POINT ( 'NONE', ( -16.76916930534303400, 70.65007990305427700, -28.43638873268705000 ) ) ; +#14983 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#14985 = ORIENTED_EDGE ( 'NONE', *, *, #19235, .F. ) ; +#14984 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71319, #27837, #77581, #40295, #3034, #46525 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003196200, 0.004118671204006392500 ), + .UNSPECIFIED. ) ; +#14986 = ORIENTED_EDGE ( 'NONE', *, *, #47357, .T. ) ; +#14987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14988 = ORIENTED_EDGE ( 'NONE', *, *, #70117, .T. ) ; +#14989 = CONICAL_SURFACE ( 'NONE', #48600, 10.00000000000009400, 0.7853981633974447300 ) ; +#14990 = AXIS2_PLACEMENT_3D ( 'NONE', #63319, #69541, #19787 ) ; +#14991 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#14992 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#14993 = AXIS2_PLACEMENT_3D ( 'NONE', #28897, #72388, #35127 ) ; +#14994 = VERTEX_POINT ( 'NONE', #53132 ) ; +#14995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14996 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44026, #37787, #43770, #6804 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966794000, 0.0007670610367943123700 ), + .UNSPECIFIED. ) ; +#14997 = EDGE_CURVE ( 'NONE', #63929, #60061, #60135, .T. ) ; +#14998 = EDGE_CURVE ( 'NONE', #71618, #63100, #55572, .T. ) ; +#14999 = VERTEX_POINT ( 'NONE', #72205 ) ; +#15000 = AXIS2_PLACEMENT_3D ( 'NONE', #69001, #75258, #25500 ) ; +#15001 = ORIENTED_EDGE ( 'NONE', *, *, #19671, .T. ) ; +#15002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15003 = VERTEX_POINT ( 'NONE', #9895 ) ; +#15004 = CONICAL_SURFACE ( 'NONE', #76826, 10.50000000000009600, 0.7853981633974500600 ) ; +#15005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15007 = EDGE_CURVE ( 'NONE', #33532, #74705, #5957, .T. ) ; +#15008 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 18.83333333333333900, -3.349151577478984600 ) ) ; +#15009 = AXIS2_PLACEMENT_3D ( 'NONE', #14803, #58325, #21086 ) ; +#15010 = AXIS2_PLACEMENT_3D ( 'NONE', #66864, #29625, #73117 ) ; +#15011 = CARTESIAN_POINT ( 'NONE', ( 16.08902460162751100, 18.01983257179027500, -28.64886839674148800 ) ) ; +#15012 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007100, 20.78933626866497200, -28.53923937255170200 ) ) ; +#15013 = ADVANCED_FACE ( 'NONE', ( #74101 ), #18593, .T. ) ; +#15014 = FACE_OUTER_BOUND ( 'NONE', #39238, .T. ) ; +#15015 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15016 = EDGE_LOOP ( 'NONE', ( #27741, #67, #59137 ) ) ; +#15017 = ADVANCED_FACE ( 'NONE', ( #20552 ), #66292, .T. ) ; +#15018 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 38.00972971738994500, -28.70555803802996000 ) ) ; +#15019 = ORIENTED_EDGE ( 'NONE', *, *, #53464, .F. ) ; +#15020 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#15021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45549, #2049, #51807, #14590 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471843459736900E-007, 0.0002673661861287586200 ), + .UNSPECIFIED. ) ; +#15022 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988900, 17.63176086632794400, -28.70555803802992800 ) ) ; +#15023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15024 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 62.33333333333333600, -5.205558038030008400 ) ) ; +#15025 = CIRCLE ( 'NONE', #49485, 10.50000000000009600 ) ; +#15026 = AXIS2_PLACEMENT_3D ( 'NONE', #23833, #11319, #79580 ) ; +#15027 = ORIENTED_EDGE ( 'NONE', *, *, #25949, .T. ) ; +#15028 = CONICAL_SURFACE ( 'NONE', #11701, 10.00000000000009200, 0.7853981633974447300 ) ; +#15029 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15030 = ORIENTED_EDGE ( 'NONE', *, *, #77042, .F. ) ; +#15031 = ADVANCED_FACE ( 'NONE', ( #24453 ), #33179, .T. ) ; +#15032 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#15033 = ORIENTED_EDGE ( 'NONE', *, *, #48663, .F. ) ; +#15034 = CONICAL_SURFACE ( 'NONE', #16717, 10.50000000000009600, 0.7853981633974500600 ) ; +#15035 = CIRCLE ( 'NONE', #5943, 9.500000000000099500 ) ; +#15036 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15037 = ORIENTED_EDGE ( 'NONE', *, *, #39751, .T. ) ; +#15038 = CARTESIAN_POINT ( 'NONE', ( -16.52197549498846400, 39.12306210240190300, -28.54786661478398500 ) ) ; +#15039 = EDGE_LOOP ( 'NONE', ( #57678, #41075, #8350 ) ) ; +#15040 = EDGE_LOOP ( 'NONE', ( #71890, #61151, #26872, #54970 ) ) ; +#15041 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#15042 = AXIS2_PLACEMENT_3D ( 'NONE', #731, #44215, #6987 ) ; +#15043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15044 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385200, 41.43650294695131500, -28.30782889147482400 ) ) ; +#15045 = ADVANCED_FACE ( 'NONE', ( #35168 ), #73, .F. ) ; +#15046 = EDGE_CURVE ( 'NONE', #4221, #19948, #45603, .T. ) ; +#15047 = FACE_OUTER_BOUND ( 'NONE', #1130, .T. ) ; +#15048 = CARTESIAN_POINT ( 'NONE', ( -17.51214229700655900, 4.975715405985432000, -27.37358685260305100 ) ) ; +#15049 = ORIENTED_EDGE ( 'NONE', *, *, #66313, .T. ) ; +#15050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15052 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 24.66666666666667900, 3.124568980892192800 ) ) ; +#15051 = FACE_OUTER_BOUND ( 'NONE', #70203, .T. ) ; +#15053 = ORIENTED_EDGE ( 'NONE', *, *, #6234, .F. ) ; +#15054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15055 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714446300, 67.92318720225483700, -28.70555803803030800 ) ) ; +#15056 = VERTEX_POINT ( 'NONE', #47925 ) ; +#15057 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15058 = ORIENTED_EDGE ( 'NONE', *, *, #9761, .F. ) ; +#15059 = VERTEX_POINT ( 'NONE', #78997 ) ; +#15060 = ORIENTED_EDGE ( 'NONE', *, *, #15485, .F. ) ; +#15061 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15062 = ORIENTED_EDGE ( 'NONE', *, *, #39310, .T. ) ; +#15063 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15064 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#15065 = ADVANCED_FACE ( 'NONE', ( #51630 ), #47747, .F. ) ; +#15066 = CONICAL_SURFACE ( 'NONE', #49075, 10.00000000000009400, 0.7853981633974447300 ) ; +#15067 = CARTESIAN_POINT ( 'NONE', ( 15.46693852784010300, 55.79999999999974800, -28.37297418063946700 ) ) ; +#15068 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183300, 49.63131911501876200, -28.51286550264510200 ) ) ; +#15069 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099026900, 28.56267502090536700, -28.41043597897459300 ) ) ; +#15070 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15071 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343285500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#15072 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45882, #2377, #14917, #58428 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698062121900E-007, 0.0008724363063899825900 ), + .UNSPECIFIED. ) ; +#15073 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15074 = ORIENTED_EDGE ( 'NONE', *, *, #13707, .F. ) ; +#15075 = PLANE ( 'NONE', #14695 ) ; +#15076 = EDGE_CURVE ( 'NONE', #44515, #75321, #31208, .T. ) ; +#15077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#15078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15079 = ORIENTED_EDGE ( 'NONE', *, *, #23098, .T. ) ; +#15080 = CYLINDRICAL_SURFACE ( 'NONE', #17390, 10.00000000000000200 ) ; +#15082 = EDGE_CURVE ( 'NONE', #72130, #80528, #16726, .T. ) ; +#15081 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19005, #31549, #43999, #6775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190611565400E-007, 0.0006649560044143584900 ), + .UNSPECIFIED. ) ; +#15083 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15084 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 70.16749699759739700, -28.20555803803047800 ) ) ; +#15085 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 71.43945992495532900, -28.34042301926881200 ) ) ; +#15086 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#15087 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466670100, 10.29130857014964400, -28.37223374938516300 ) ) ; +#15088 = EDGE_CURVE ( 'NONE', #36984, #65478, #2233, .T. ) ; +#15089 = EDGE_CURVE ( 'NONE', #2651, #71006, #68588, .T. ) ; +#15090 = AXIS2_PLACEMENT_3D ( 'NONE', #10178, #28991, #35218 ) ; +#15091 = FACE_OUTER_BOUND ( 'NONE', #53389, .T. ) ; +#15092 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372530200, 83.66464174796065800, -28.53896444442249300 ) ) ; +#15093 = EDGE_LOOP ( 'NONE', ( #58610, #53572, #24034, #70058 ) ) ; +#15094 = ORIENTED_EDGE ( 'NONE', *, *, #32934, .F. ) ; +#15095 = CONICAL_SURFACE ( 'NONE', #66649, 10.00000000000009200, 0.7853981633974447300 ) ; +#15096 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 68.33333333333334300, 5.722645192245503900 ) ) ; +#15097 = AXIS2_PLACEMENT_3D ( 'NONE', #32640, #76146, #38862 ) ; +#15099 = ORIENTED_EDGE ( 'NONE', *, *, #51966, .F. ) ; +#15098 = EDGE_CURVE ( 'NONE', #67122, #13337, #54111, .T. ) ; +#15100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15101 = EDGE_CURVE ( 'NONE', #64447, #47717, #39656, .T. ) ; +#15102 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195356400, 38.68365405593805000, -28.35038903107270500 ) ) ; +#15103 = EDGE_CURVE ( 'NONE', #23882, #10459, #25205, .T. ) ; +#15104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15105 = AXIS2_PLACEMENT_3D ( 'NONE', #70779, #39217, #39764 ) ; +#15106 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 90.13716795162659400, -28.48697406221667400 ) ) ; +#15107 = FACE_OUTER_BOUND ( 'NONE', #48484, .T. ) ; +#15108 = CONICAL_SURFACE ( 'NONE', #3806, 10.00000000000009200, 0.7853981633974447300 ) ; +#15109 = VERTEX_POINT ( 'NONE', #29772 ) ; +#15110 = AXIS2_PLACEMENT_3D ( 'NONE', #28164, #71375, #65422 ) ; +#15111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15112 = FACE_OUTER_BOUND ( 'NONE', #60782, .T. ) ; +#15113 = ORIENTED_EDGE ( 'NONE', *, *, #16033, .T. ) ; +#15114 = EDGE_CURVE ( 'NONE', #862, #14833, #64366, .T. ) ; +#15115 = ORIENTED_EDGE ( 'NONE', *, *, #37450, .T. ) ; +#15116 = ADVANCED_FACE ( 'NONE', ( #2022 ), #78945, .T. ) ; +#15117 = AXIS2_PLACEMENT_3D ( 'NONE', #18342, #61876, #24603 ) ; +#15118 = AXIS2_PLACEMENT_3D ( 'NONE', #13628, #57124, #19864 ) ; +#15119 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 4.999999999999997300, 16.29444196196998700 ) ) ; +#15120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69975, #32723, #7961, #51452 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192577297500 ), + .UNSPECIFIED. ) ; +#15121 = CIRCLE ( 'NONE', #38911, 10.00000000000009200 ) ; +#15122 = CARTESIAN_POINT ( 'NONE', ( -1.705837858217853700, 14.04999999999976100, -28.37136602294623300 ) ) ; +#15123 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274343100, 33.16464174796073600, -28.53896444442200300 ) ) ; +#15124 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 39.66666666666667100, -6.705558038030000400 ) ) ; +#15125 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180780500, 59.94924284854683800, -28.20555803803030800 ) ) ; +#15126 = FACE_OUTER_BOUND ( 'NONE', #21495, .T. ) ; +#15127 = ORIENTED_EDGE ( 'NONE', *, *, #7559, .T. ) ; +#15128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15129 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105232700, 90.28233213024618900, -28.25051428653880900 ) ) ; +#15130 = CARTESIAN_POINT ( 'NONE', ( 16.45968132316375700, 55.17149633148112300, -28.60315268788645300 ) ) ; +#15131 = VERTEX_POINT ( 'NONE', #5522 ) ; +#15132 = ADVANCED_FACE ( 'NONE', ( #16641 ), #45788, .F. ) ; +#15133 = ORIENTED_EDGE ( 'NONE', *, *, #54257, .F. ) ; +#15134 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.62753447840886200, -28.38801640354855500 ) ) ; +#15135 = EDGE_LOOP ( 'NONE', ( #38121, #28745, #7019 ) ) ; +#15136 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15137 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#15138 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348802300, 81.99560977511636400, -28.70555803803030800 ) ) ; +#15140 = ADVANCED_FACE ( 'NONE', ( #14687 ), #12759, .F. ) ; +#15139 = EDGE_LOOP ( 'NONE', ( #80065, #72581, #17808, #20549 ) ) ; +#15141 = FACE_OUTER_BOUND ( 'NONE', #43674, .T. ) ; +#15142 = VERTEX_POINT ( 'NONE', #30564 ) ; +#15143 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15144 = ORIENTED_EDGE ( 'NONE', *, *, #29091, .T. ) ; +#15145 = ADVANCED_FACE ( 'NONE', ( #31249 ), #60452, .F. ) ; +#15146 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730277100, 61.58737389638855600, -28.29936525552451300 ) ) ; +#15147 = ORIENTED_EDGE ( 'NONE', *, *, #55931, .T. ) ; +#15148 = CIRCLE ( 'NONE', #13347, 9.500000000000129700 ) ; +#15149 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846550600, 18.99920551340369100, -28.70555803803025800 ) ) ; +#15150 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#15151 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 2.000000000000001800, -1.205558038030005300 ) ) ; +#15152 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992900, 9.418457393421045200, -28.68863412692833100 ) ) ; +#15153 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15155 = ORIENTED_EDGE ( 'NONE', *, *, #17201, .F. ) ; +#15156 = FACE_OUTER_BOUND ( 'NONE', #76728, .T. ) ; +#15157 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65769, #52944, #9989, #53505 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336188032748100E-007, 0.0006649560044143810500 ), + .UNSPECIFIED. ) ; +#15158 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922500300, 80.09037803491499100, -28.29483400905889200 ) ) ; +#15159 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15160 = AXIS2_PLACEMENT_3D ( 'NONE', #12388, #55870, #18621 ) ; +#15161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15162 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15163 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15164 = EDGE_CURVE ( 'NONE', #1835, #33868, #10751, .T. ) ; +#15165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15167 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15168 = AXIS2_PLACEMENT_3D ( 'NONE', #19556, #63082, #25823 ) ; +#15169 = CARTESIAN_POINT ( 'NONE', ( -10.24306493325782900, 71.43482203710631500, -28.29548531138973600 ) ) ; +#15170 = FACE_OUTER_BOUND ( 'NONE', #68613, .T. ) ; +#15171 = CIRCLE ( 'NONE', #54057, 9.500000000000099500 ) ; +#15172 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21706, #27976, #46670, #9426 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569874071100E-007, 0.0004669842289003212600 ), + .UNSPECIFIED. ) ; +#15173 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305560800, 61.89604671418325000, -28.70555803802999500 ) ) ; +#15174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15175 = ORIENTED_EDGE ( 'NONE', *, *, #64343, .F. ) ; +#15176 = ORIENTED_EDGE ( 'NONE', *, *, #24634, .T. ) ; +#15177 = CIRCLE ( 'NONE', #58776, 10.50000000000009600 ) ; +#15178 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15180 = ORIENTED_EDGE ( 'NONE', *, *, #64321, .T. ) ; +#15179 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.43250300240229600, -28.20555803802995200 ) ) ; +#15181 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15182 = CONICAL_SURFACE ( 'NONE', #42132, 10.50000000000009600, 0.7853981633974500600 ) ; +#15183 = CIRCLE ( 'NONE', #33488, 10.50000000000009600 ) ; +#15185 = EDGE_CURVE ( 'NONE', #7051, #24196, #77050, .T. ) ; +#15184 = EDGE_LOOP ( 'NONE', ( #40964, #79861, #41749, #24089 ) ) ; +#15186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15188 = CARTESIAN_POINT ( 'NONE', ( -3.476549250941809000, 9.410658797990212300, -28.68817753164652700 ) ) ; +#15189 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 11.33333333333334600, 4.294441961970000500 ) ) ; +#15190 = EDGE_CURVE ( 'NONE', #71408, #40791, #62603, .T. ) ; +#15191 = CONICAL_SURFACE ( 'NONE', #38471, 10.00000000000009200, 0.7853981633974415100 ) ; +#15192 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841333000, 70.16349705304836000, -28.30782889147497600 ) ) ; +#15193 = ORIENTED_EDGE ( 'NONE', *, *, #39644, .T. ) ; +#15194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15195 = EDGE_LOOP ( 'NONE', ( #42348, #15144, #77503 ) ) ; +#15196 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 45.66666666666667900, -5.535685056952199400 ) ) ; +#15197 = EDGE_CURVE ( 'NONE', #59944, #5963, #48102, .T. ) ; +#15198 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4521, #17051, #35804, #79328 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775788645400, 0.0009605145132136689200 ), + .UNSPECIFIED. ) ; +#15200 = FACE_OUTER_BOUND ( 'NONE', #43083, .T. ) ; +#15199 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 90.34267608797600200, -28.20555803802997700 ) ) ; +#15201 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 10.66666666666667100, -8.133761268305512700 ) ) ; +#15202 = EDGE_CURVE ( 'NONE', #60477, #69283, #68222, .T. ) ; +#15203 = CIRCLE ( 'NONE', #68967, 10.50000000000009600 ) ; +#15204 = AXIS2_PLACEMENT_3D ( 'NONE', #48312, #11096, #54595 ) ; +#15205 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300912900, 83.19621076493005800, -28.61864990621748800 ) ) ; +#15206 = VERTEX_POINT ( 'NONE', #32179 ) ; +#15207 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444313100, 69.72166103827328200, -28.53892303408230500 ) ) ; +#15208 = EDGE_CURVE ( 'NONE', #76933, #12513, #49687, .T. ) ; +#15209 = ORIENTED_EDGE ( 'NONE', *, *, #9469, .F. ) ; +#15210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15211 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 70.34267608797603100, -28.20555803802997700 ) ) ; +#15212 = ORIENTED_EDGE ( 'NONE', *, *, #65399, .T. ) ; +#15213 = ORIENTED_EDGE ( 'NONE', *, *, #4343, .T. ) ; +#15214 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 48.00000000000000700, 9.794441961969996100 ) ) ; +#15215 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15216 = EDGE_LOOP ( 'NONE', ( #63792, #42031, #1435 ) ) ; +#15217 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534556000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#15218 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615371300, 50.79999999999999000, -28.55171188418378100 ) ) ; +#15219 = CONICAL_SURFACE ( 'NONE', #34436, 10.50000000000009600, 0.7853981633974518300 ) ; +#15220 = FACE_OUTER_BOUND ( 'NONE', #5145, .T. ) ; +#15221 = ORIENTED_EDGE ( 'NONE', *, *, #54452, .T. ) ; +#15222 = AXIS2_PLACEMENT_3D ( 'NONE', #46231, #8967, #52491 ) ; +#15223 = EDGE_CURVE ( 'NONE', #55770, #75377, #39004, .T. ) ; +#15224 = CARTESIAN_POINT ( 'NONE', ( 15.11625473641665700, 14.05000000000005000, -28.53994725305386700 ) ) ; +#15225 = EDGE_CURVE ( 'NONE', #62020, #41038, #29331, .T. ) ; +#15226 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#15227 = EDGE_CURVE ( 'NONE', #76771, #11140, #62376, .T. ) ; +#15228 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 84.13556610137280200, -28.54207364681942500 ) ) ; +#15229 = ORIENTED_EDGE ( 'NONE', *, *, #3168, .F. ) ; +#15230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#15231 = FACE_OUTER_BOUND ( 'NONE', #75649, .T. ) ; +#15232 = AXIS2_PLACEMENT_3D ( 'NONE', #4273, #72570, #41534 ) ; +#15233 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719593000, 43.65857157145702400, -28.37229765499282100 ) ) ; +#15234 = ORIENTED_EDGE ( 'NONE', *, *, #43307, .F. ) ; +#15235 = CONICAL_SURFACE ( 'NONE', #10003, 10.50000000000009600, 0.7853981633974500600 ) ; +#15236 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#15237 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 9.940690926013783000, -28.35186440610855700 ) ) ; +#15238 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#15239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15240 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15241 = CONICAL_SURFACE ( 'NONE', #57464, 10.00000000000009200, 0.7853981633974447300 ) ; +#15242 = EDGE_CURVE ( 'NONE', #5994, #60445, #33671, .T. ) ; +#15243 = CARTESIAN_POINT ( 'NONE', ( -10.04026895850641800, 41.37561462481247100, -28.30309985153376900 ) ) ; +#15244 = ADVANCED_FACE ( 'NONE', ( #10788 ), #25401, .F. ) ; +#15245 = AXIS2_PLACEMENT_3D ( 'NONE', #51355, #57655, #7873 ) ; +#15246 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15247 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 58.17143691309408400, -28.36981695106780800 ) ) ; +#15248 = ORIENTED_EDGE ( 'NONE', *, *, #58421, .F. ) ; +#15249 = ADVANCED_FACE ( 'NONE', ( #43836 ), #73081, .T. ) ; +#15250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15251 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15252 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#15253 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 51.49999999999998600, -7.061964498581016200 ) ) ; +#15254 = FACE_OUTER_BOUND ( 'NONE', #32697, .T. ) ; +#15255 = CARTESIAN_POINT ( 'NONE', ( 2.438065798940486100, 49.61613388835919400, -28.57723500840080200 ) ) ; +#15256 = EDGE_LOOP ( 'NONE', ( #79392, #31642, #13669, #25506 ) ) ; +#15257 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572100, 77.92318720225497900, -28.70555803802997700 ) ) ; +#15258 = CONICAL_SURFACE ( 'NONE', #25386, 10.00000000000009600, 0.7853981633974447300 ) ; +#15259 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64057, #20526, #76523, #39257 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690709678500E-007, 0.0007331055842534808400 ), + .UNSPECIFIED. ) ; +#15260 = ORIENTED_EDGE ( 'NONE', *, *, #35192, .F. ) ; +#15261 = VERTEX_POINT ( 'NONE', #32966 ) ; +#15262 = CIRCLE ( 'NONE', #45145, 10.50000000000009200 ) ; +#15263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15264 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180781400, 69.94924284854683100, -28.20555803803030800 ) ) ; +#15265 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551029100, 45.50000000000000000, 4.650848422521010900 ) ) ; +#15266 = AXIS2_PLACEMENT_3D ( 'NONE', #7895, #8150, #51658 ) ; +#15267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15268 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027177000, 62.22511094383830300, -28.55192314908421000 ) ) ; +#15269 = VERTEX_POINT ( 'NONE', #76480 ) ; +#15270 = ADVANCED_FACE ( 'NONE', ( #58469 ), #39972, .F. ) ; +#15271 = AXIS2_PLACEMENT_3D ( 'NONE', #39048, #51269, #63852 ) ; +#15272 = CIRCLE ( 'NONE', #63500, 10.00000000000009600 ) ; +#15273 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15274 = CONICAL_SURFACE ( 'NONE', #56352, 10.00000000000009400, 0.7853981633974447300 ) ; +#15275 = ORIENTED_EDGE ( 'NONE', *, *, #24687, .T. ) ; +#15276 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 47.50000000000000700, -7.061964498581017900 ) ) ; +#15277 = EDGE_CURVE ( 'NONE', #36910, #38741, #19208, .T. ) ; +#15278 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 80.13716795162648100, -28.48697406221665300 ) ) ; +#15279 = AXIS2_PLACEMENT_3D ( 'NONE', #47064, #53347, #3566 ) ; +#15280 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#15281 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 16.66666666666668200, 2.794441961969992100 ) ) ; +#15282 = EDGE_LOOP ( 'NONE', ( #71677, #28220, #48942 ) ) ; +#15283 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#15284 = AXIS2_PLACEMENT_3D ( 'NONE', #24475, #68248, #55725 ) ; +#15285 = CARTESIAN_POINT ( 'NONE', ( 15.20655873232935400, 17.56067300957042900, -28.70555803803001300 ) ) ; +#15286 = FACE_OUTER_BOUND ( 'NONE', #18802, .T. ) ; +#15287 = ORIENTED_EDGE ( 'NONE', *, *, #5425, .T. ) ; +#15288 = AXIS2_PLACEMENT_3D ( 'NONE', #37639, #393, #43885 ) ; +#15289 = ORIENTED_EDGE ( 'NONE', *, *, #33444, .F. ) ; +#15290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15291 = VERTEX_POINT ( 'NONE', #64287 ) ; +#15292 = ORIENTED_EDGE ( 'NONE', *, *, #10324, .T. ) ; +#15293 = ORIENTED_EDGE ( 'NONE', *, *, #15348, .T. ) ; +#15294 = FACE_OUTER_BOUND ( 'NONE', #13121, .T. ) ; +#15295 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 20.00000000000000000, -1.205558038030002800 ) ) ; +#15296 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#15297 = ORIENTED_EDGE ( 'NONE', *, *, #51146, .T. ) ; +#15298 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#15299 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24602, #74121, #49559, #12368 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882720035400E-007, 0.0004435496461727840100 ), + .UNSPECIFIED. ) ; +#15300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15301 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#15302 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 60.16666666666668600, 0.9380355014189834000 ) ) ; +#15303 = FACE_OUTER_BOUND ( 'NONE', #80011, .T. ) ; +#15304 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#15305 = EDGE_CURVE ( 'NONE', #31405, #21953, #4734, .T. ) ; +#15306 = ORIENTED_EDGE ( 'NONE', *, *, #12103, .F. ) ; +#15307 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33850, #2538, #46308, #9057 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278324400, 0.0005468822770175586900 ), + .UNSPECIFIED. ) ; +#15308 = ORIENTED_EDGE ( 'NONE', *, *, #40458, .F. ) ; +#15309 = EDGE_CURVE ( 'NONE', #15529, #2201, #71060, .T. ) ; +#15310 = CONICAL_SURFACE ( 'NONE', #2111, 10.00000000000009200, 0.7853981633974447300 ) ; +#15311 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180783100, 79.94924284854681700, -28.20555803803030800 ) ) ; +#15312 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 70.34267608797600200, -28.20555803803030800 ) ) ; +#15313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15314 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38477, #44715, #50987, #13792 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549260058700E-007, 0.0008759529789574145300 ), + .UNSPECIFIED. ) ; +#15316 = CARTESIAN_POINT ( 'NONE', ( 9.532379739681781300, 94.26940775139536300, -28.34592507370791000 ) ) ; +#15315 = CONICAL_SURFACE ( 'NONE', #45384, 10.00000000000009200, 0.7853981633974447300 ) ; +#15317 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15319 = EDGE_CURVE ( 'NONE', #10538, #38210, #56600, .T. ) ; +#15320 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999975100, 80.16749699759752400, -28.20555803803014400 ) ) ; +#15321 = VERTEX_POINT ( 'NONE', #51959 ) ; +#15322 = ADVANCED_FACE ( 'NONE', ( #75022 ), #6872, .F. ) ; +#15323 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124986700, 76.46717019299478600, -28.53914313452737500 ) ) ; +#15324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55357, #73897, #24382, #67891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.938893903907228400E-018, 0.001333132141652963800 ), + .UNSPECIFIED. ) ; +#15325 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528041748200, 67.94142842854300600, -28.37229765499292400 ) ) ; +#15326 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 70.16054007504432400, -28.34042301926905700 ) ) ; +#15327 = EDGE_CURVE ( 'NONE', #27271, #33960, #42126, .T. ) ; +#15328 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 22.50000000000000400, -4.865812075874393000 ) ) ; +#15329 = EDGE_CURVE ( 'NONE', #59983, #21026, #27710, .T. ) ; +#15330 = CIRCLE ( 'NONE', #65691, 10.50000000000009900 ) ; +#15331 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#15332 = ORIENTED_EDGE ( 'NONE', *, *, #17201, .T. ) ; +#15333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15334 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15336 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 71.43250300240228500, -28.23966044827355000 ) ) ; +#15337 = ORIENTED_EDGE ( 'NONE', *, *, #71343, .F. ) ; +#15338 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958900, 81.46283204837338600, -28.48697406221667400 ) ) ; +#15339 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919845600, 17.91070809551067100, -28.20555803803025800 ) ) ; +#15340 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#15341 = ADVANCED_FACE ( 'NONE', ( #8800 ), #54561, .T. ) ; +#15342 = CIRCLE ( 'NONE', #43032, 9.500000000000097700 ) ; +#15343 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 36.94142842854297000, -28.20555803802995200 ) ) ; +#15344 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15345 = AXIS2_PLACEMENT_3D ( 'NONE', #43705, #12761, #213 ) ; +#15346 = EDGE_CURVE ( 'NONE', #4678, #76568, #13245, .T. ) ; +#15347 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#15348 = EDGE_CURVE ( 'NONE', #47561, #46843, #71112, .T. ) ; +#15349 = ORIENTED_EDGE ( 'NONE', *, *, #46886, .T. ) ; +#15350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15351 = EDGE_CURVE ( 'NONE', #32513, #34788, #79553, .T. ) ; +#15352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15353 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 79.77559325427188200, -28.45987523529578700 ) ) ; +#15354 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#15355 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 80.16054007504463600, -28.34042301926881500 ) ) ; +#15356 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15357 = AXIS2_PLACEMENT_3D ( 'NONE', #37958, #38225, #25766 ) ; +#15358 = CIRCLE ( 'NONE', #72444, 10.00000000000009200 ) ; +#15359 = ORIENTED_EDGE ( 'NONE', *, *, #45476, .T. ) ; +#15360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15361 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15364 = PLANE ( 'NONE', #59566 ) ; +#15365 = ORIENTED_EDGE ( 'NONE', *, *, #3385, .T. ) ; +#15366 = AXIS2_PLACEMENT_3D ( 'NONE', #431, #43934, #6699 ) ; +#15367 = AXIS2_PLACEMENT_3D ( 'NONE', #40033, #2733, #46249 ) ; +#15368 = AXIS2_PLACEMENT_3D ( 'NONE', #29270, #72744, #35484 ) ; +#15369 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15370 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19431, #13201, #917, #44395 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066681692481906100E-007, 0.0004318395898544865900 ), + .UNSPECIFIED. ) ; +#15371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15372 = ADVANCED_FACE ( 'NONE', ( #56509 ), #4921, .F. ) ; +#15373 = FACE_OUTER_BOUND ( 'NONE', #58657, .T. ) ; +#15374 = FACE_OUTER_BOUND ( 'NONE', #48714, .T. ) ; +#15375 = EDGE_LOOP ( 'NONE', ( #74445, #52749, #40048, #77715 ) ) ; +#15376 = ORIENTED_EDGE ( 'NONE', *, *, #61544, .F. ) ; +#15377 = EDGE_LOOP ( 'NONE', ( #24961, #77201, #27019, #69510 ) ) ; +#15378 = ORIENTED_EDGE ( 'NONE', *, *, #42135, .T. ) ; +#15379 = EDGE_LOOP ( 'NONE', ( #13319, #15916, #33071, #62221 ) ) ; +#15380 = VERTEX_POINT ( 'NONE', #77831 ) ; +#15381 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 66.16666666666670000, -9.205558038030003900 ) ) ; +#15382 = AXIS2_PLACEMENT_3D ( 'NONE', #69019, #31767, #75277 ) ; +#15383 = EDGE_LOOP ( 'NONE', ( #36122, #14232, #33401, #67120 ) ) ; +#15384 = EDGE_CURVE ( 'NONE', #77552, #35408, #65107, .T. ) ; +#15385 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819088100, 71.65075715145258100, -28.20555803803014100 ) ) ; +#15386 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035087000, 39.23507838941436200, -28.27580420063966900 ) ) ; +#15387 = ORIENTED_EDGE ( 'NONE', *, *, #77764, .T. ) ; +#15388 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492308100, 73.03944396378781800, -28.70555803803004500 ) ) ; +#15389 = FACE_OUTER_BOUND ( 'NONE', #39440, .T. ) ; +#15390 = ORIENTED_EDGE ( 'NONE', *, *, #70372, .F. ) ; +#15391 = PLANE ( 'NONE', #22967 ) ; +#15392 = EDGE_CURVE ( 'NONE', #11263, #27688, #41910, .T. ) ; +#15393 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#15394 = VERTEX_POINT ( 'NONE', #71589 ) ; +#15395 = AXIS2_PLACEMENT_3D ( 'NONE', #12129, #55621, #18379 ) ; +#15396 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#15397 = CIRCLE ( 'NONE', #37532, 10.00000000000009600 ) ; +#15399 = ORIENTED_EDGE ( 'NONE', *, *, #12583, .F. ) ; +#15398 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344350900, 31.17701665379241800, -28.20555803802996000 ) ) ; +#15400 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 37.50000000000000700, 6.847000845227641200 ) ) ; +#15401 = CARTESIAN_POINT ( 'NONE', ( -4.561825084090864700, 30.98385710212512100, -28.57719681746177500 ) ) ; +#15402 = AXIS2_PLACEMENT_3D ( 'NONE', #23549, #36063, #79582 ) ; +#15403 = CARTESIAN_POINT ( 'NONE', ( -9.254548258615017200, 49.59617684379258400, -28.64146614751470200 ) ) ; +#15404 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15405 = CONICAL_SURFACE ( 'NONE', #28665, 10.50000000000009600, 0.7853981633974482800 ) ; +#15406 = VERTEX_POINT ( 'NONE', #53061 ) ; +#15407 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15408 = ORIENTED_EDGE ( 'NONE', *, *, #41895, .F. ) ; +#15409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15411 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846297200, 50.79999999999999000, -28.55171188418377100 ) ) ; +#15412 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#15413 = AXIS2_PLACEMENT_3D ( 'NONE', #1513, #20300, #7755 ) ; +#15414 = ADVANCED_FACE ( 'NONE', ( #37999 ), #59343, .T. ) ; +#15415 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#15417 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32291, #51009, #26337, #69812 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143706590200, 0.0006599881756728229900 ), + .UNSPECIFIED. ) ; +#15418 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#15419 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15420 = EDGE_CURVE ( 'NONE', #39390, #78359, #76961, .T. ) ; +#15421 = FACE_OUTER_BOUND ( 'NONE', #48749, .T. ) ; +#15422 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, -0.1666666666666480100, -3.349151577478984600 ) ) ; +#15423 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650649100, 49.58087956867532900, -28.30223257055582700 ) ) ; +#15424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#15425 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15426 = ORIENTED_EDGE ( 'NONE', *, *, #23084, .T. ) ; +#15427 = EDGE_LOOP ( 'NONE', ( #11940, #19002, #13905, #48854, #5761 ) ) ; +#15428 = FILL_AREA_STYLE ('',( #52670 ) ) ; +#15429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15430 = ADVANCED_FACE ( 'NONE', ( #23427 ), #2965, .F. ) ; +#15431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15432 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079882700, 49.66616330387869000, -28.27375072930955500 ) ) ; +#15433 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23261, #66781, #42001, #4745 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.201408860871732000E-017, 0.002676326193402435300 ), + .UNSPECIFIED. ) ; +#15434 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013700, 79.83662311806175200, -28.37223523914899600 ) ) ; +#15435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15436 = CONICAL_SURFACE ( 'NONE', #72312, 10.00000000000009400, 0.7853981633974447300 ) ; +#15437 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500129400, 59.83662311806175200, -28.37223523914899900 ) ) ; +#15438 = CONICAL_SURFACE ( 'NONE', #1043, 10.00000000000009400, 0.7853981633974447300 ) ; +#15439 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189933500, 31.47636006919909900, -28.38670679782167700 ) ) ; +#15440 = VERTEX_POINT ( 'NONE', #34865 ) ; +#15441 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15442 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15444 = EDGE_CURVE ( 'NONE', #44806, #76759, #50579, .T. ) ; +#15443 = ORIENTED_EDGE ( 'NONE', *, *, #16946, .T. ) ; +#15445 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943314000, 45.54999999999998300, -28.70555803802996700 ) ) ; +#15446 = EDGE_CURVE ( 'NONE', #72050, #34401, #27360, .T. ) ; +#15447 = VERTEX_POINT ( 'NONE', #22615 ) ; +#15448 = ADVANCED_FACE ( 'NONE', ( #36076 ), #34128, .T. ) ; +#15449 = FACE_OUTER_BOUND ( 'NONE', #80540, .T. ) ; +#15450 = ORIENTED_EDGE ( 'NONE', *, *, #76408, .T. ) ; +#15451 = ORIENTED_EDGE ( 'NONE', *, *, #37010, .T. ) ; +#15452 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 62.18315603019262700, -28.70555803803024400 ) ) ; +#15453 = VERTEX_POINT ( 'NONE', #10379 ) ; +#15454 = ORIENTED_EDGE ( 'NONE', *, *, #36767, .T. ) ; +#15455 = ORIENTED_EDGE ( 'NONE', *, *, #73596, .T. ) ; +#15456 = ORIENTED_EDGE ( 'NONE', *, *, #13665, .F. ) ; +#15457 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 47.20389005397399300, -28.37519436813179000 ) ) ; +#15458 = AXIS2_PLACEMENT_3D ( 'NONE', #72103, #78339, #28599 ) ; +#15459 = ORIENTED_EDGE ( 'NONE', *, *, #58180, .F. ) ; +#15460 = EDGE_CURVE ( 'NONE', #58782, #45907, #36172, .T. ) ; +#15461 = EDGE_CURVE ( 'NONE', #24516, #28936, #21721, .T. ) ; +#15462 = CARTESIAN_POINT ( 'NONE', ( -3.040273598549584100, 18.22437813624630100, -28.30310527599298000 ) ) ; +#15463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58159, #51865, #8354, #64455 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951557060200E-007, 0.0002673660010786668900 ), + .UNSPECIFIED. ) ; +#15464 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448300, 85.79999999999998300, -28.20555803802997700 ) ) ; +#15465 = ADVANCED_FACE ( 'NONE', ( #50630 ), #1008, .F. ) ; +#15466 = EDGE_CURVE ( 'NONE', #35828, #43565, #7209, .T. ) ; +#15467 = CIRCLE ( 'NONE', #53200, 10.00000000000009200 ) ; +#15468 = AXIS2_PLACEMENT_3D ( 'NONE', #58565, #33821, #21330 ) ; +#15470 = EDGE_LOOP ( 'NONE', ( #7806, #60111, #42664 ) ) ; +#15469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15471 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 30.96868088498121500, -28.51286550264512000 ) ) ; +#15472 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 9.166666666666675000, -4.152999154772358800 ) ) ; +#15473 = ORIENTED_EDGE ( 'NONE', *, *, #29740, .F. ) ; +#15474 = EDGE_LOOP ( 'NONE', ( #43298, #43239, #27324 ) ) ; +#15475 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263204800, 14.04999999999951400, -28.70555803803025800 ) ) ; +#15476 = FACE_OUTER_BOUND ( 'NONE', #36357, .T. ) ; +#15477 = ADVANCED_FACE ( 'NONE', ( #19532 ), #48677, .F. ) ; +#15478 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 43.50000000000000700, 2.454695999814385600 ) ) ; +#15479 = AXIS2_PLACEMENT_3D ( 'NONE', #61545, #24254, #67780 ) ; +#15481 = ORIENTED_EDGE ( 'NONE', *, *, #42528, .T. ) ; +#15480 = AXIS2_PLACEMENT_3D ( 'NONE', #2024, #45509, #8262 ) ; +#15482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15483 = EDGE_LOOP ( 'NONE', ( #11707, #54198, #10937, #59229 ) ) ; +#15484 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15485 = EDGE_CURVE ( 'NONE', #74194, #34665, #73564, .T. ) ; +#15486 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 8.500000000000008900, 4.650848422521016300 ) ) ; +#15487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15488 = CARTESIAN_POINT ( 'NONE', ( 2.215689548559383700E-013, 16.39962244433161600, -28.53664883431610400 ) ) ; +#15489 = CIRCLE ( 'NONE', #54105, 10.00000000000009400 ) ; +#15490 = ORIENTED_EDGE ( 'NONE', *, *, #41656, .F. ) ; +#15491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15492 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 45.83333333333334300, -12.20555803803000600 ) ) ; +#15493 = ORIENTED_EDGE ( 'NONE', *, *, #32734, .T. ) ; +#15494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15496 = AXIS2_PLACEMENT_3D ( 'NONE', #79972, #23953, #48921 ) ; +#15497 = EDGE_CURVE ( 'NONE', #43942, #25889, #59087, .T. ) ; +#15498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70187, #1913, #20715, #64251 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206601639500E-005, 0.001076779618376409000 ), + .UNSPECIFIED. ) ; +#15499 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338481100, 17.99322649091052600, -28.30799595738908200 ) ) ; +#15500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15502 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#15503 = FACE_OUTER_BOUND ( 'NONE', #49740, .T. ) ; +#15504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15505 = CIRCLE ( 'NONE', #17649, 10.00000000000009200 ) ; +#15506 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15508 = ORIENTED_EDGE ( 'NONE', *, *, #57040, .T. ) ; +#15509 = AXIS2_PLACEMENT_3D ( 'NONE', #48305, #11089, #54591 ) ; +#15510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15511 = ORIENTED_EDGE ( 'NONE', *, *, #21903, .F. ) ; +#15512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15513 = CARTESIAN_POINT ( 'NONE', ( -5.294162141782177100, 14.05000000000000800, -28.37136602294606600 ) ) ; +#15514 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15515 = ORIENTED_EDGE ( 'NONE', *, *, #41865, .T. ) ; +#15516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15517 = FACE_OUTER_BOUND ( 'NONE', #30810, .T. ) ; +#15518 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194903400, 54.83849307182673300, -28.68631150211663800 ) ) ; +#15519 = ORIENTED_EDGE ( 'NONE', *, *, #29214, .T. ) ; +#15520 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124931600, 75.13282980700420000, -28.53914313452787300 ) ) ; +#15521 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#15522 = FACE_OUTER_BOUND ( 'NONE', #66553, .T. ) ; +#15523 = AXIS2_PLACEMENT_3D ( 'NONE', #18524, #12285, #80539 ) ; +#15524 = ORIENTED_EDGE ( 'NONE', *, *, #44714, .F. ) ; +#15525 = ORIENTED_EDGE ( 'NONE', *, *, #41190, .T. ) ; +#15526 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 49.33333333333335000, 5.722645192245503900 ) ) ; +#15527 = ORIENTED_EDGE ( 'NONE', *, *, #72085, .T. ) ; +#15528 = CIRCLE ( 'NONE', #48549, 10.00000000000009200 ) ; +#15529 = VERTEX_POINT ( 'NONE', #29709 ) ; +#15530 = ORIENTED_EDGE ( 'NONE', *, *, #7798, .T. ) ; +#15531 = EDGE_LOOP ( 'NONE', ( #54229, #65637, #8450 ) ) ; +#15532 = VERTEX_POINT ( 'NONE', #35668 ) ; +#15533 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#15534 = ADVANCED_FACE ( 'NONE', ( #67218 ), #15634, .F. ) ; +#15535 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#15536 = AXIS2_PLACEMENT_3D ( 'NONE', #55525, #18279, #61808 ) ; +#15538 = ORIENTED_EDGE ( 'NONE', *, *, #77745, .F. ) ; +#15537 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576909000, 14.04999999999975700, -28.65220501466660300 ) ) ; +#15539 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15541 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11875, #80414, #18389, #61924 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460908692593600E-007, 0.0008482521192571691000 ), + .UNSPECIFIED. ) ; +#15542 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#15543 = VERTEX_POINT ( 'NONE', #11192 ) ; +#15544 = CONICAL_SURFACE ( 'NONE', #16179, 10.00000000000009400, 0.7853981633974447300 ) ; +#15545 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 49.66666666666667900, 2.794441961969992100 ) ) ; +#15546 = EDGE_LOOP ( 'NONE', ( #6692, #35836, #73624, #71988, #34389 ) ) ; +#15547 = ADVANCED_FACE ( 'NONE', ( #65308 ), #17433, .T. ) ; +#15548 = ORIENTED_EDGE ( 'NONE', *, *, #46045, .F. ) ; +#15549 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544083800, 81.52472935029894100, -28.39317435246136200 ) ) ; +#15550 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63650, #20124, #1591, #45071 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376944000 ), + .UNSPECIFIED. ) ; +#15551 = VERTEX_POINT ( 'NONE', #48397 ) ; +#15552 = VERTEX_POINT ( 'NONE', #73462 ) ; +#15553 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818085700, 81.65075715145329100, -28.20555803803047800 ) ) ; +#15554 = ADVANCED_FACE ( 'NONE', ( #32173 ), #46731, .F. ) ; +#15555 = FACE_OUTER_BOUND ( 'NONE', #60565, .T. ) ; +#15556 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 14.50000000000000900, -7.061964498581016200 ) ) ; +#15557 = CARTESIAN_POINT ( 'NONE', ( 19.73612703914813000, 93.96787865125902800, -27.51374913491563100 ) ) ; +#15558 = ORIENTED_EDGE ( 'NONE', *, *, #58695, .F. ) ; +#15559 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853334900, 31.29130857014963900, -28.37223374938518500 ) ) ; +#15560 = ORIENTED_EDGE ( 'NONE', *, *, #2660, .T. ) ; +#15561 = ADVANCED_FACE ( 'NONE', ( #79867 ), #13702, .T. ) ; +#15562 = FACE_OUTER_BOUND ( 'NONE', #72341, .T. ) ; +#15563 = ORIENTED_EDGE ( 'NONE', *, *, #5340, .T. ) ; +#15564 = EDGE_CURVE ( 'NONE', #64284, #62732, #30249, .T. ) ; +#15565 = ORIENTED_EDGE ( 'NONE', *, *, #29056, .T. ) ; +#15566 = ORIENTED_EDGE ( 'NONE', *, *, #67876, .F. ) ; +#15567 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 17.83333333333333200, 0.1341879241256075400 ) ) ; +#15568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15569 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15570 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15571 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 58.00000000000000700, -1.205558038030005300 ) ) ; +#15572 = EDGE_CURVE ( 'NONE', #43862, #16048, #69155, .T. ) ; +#15573 = AXIS2_PLACEMENT_3D ( 'NONE', #76640, #64177, #70387 ) ; +#15574 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 87.94142842854310500, -28.20555803802997700 ) ) ; +#15575 = CONICAL_SURFACE ( 'NONE', #42741, 10.50000000000009600, 0.7853981633974482800 ) ; +#15576 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#15577 = CIRCLE ( 'NONE', #61397, 10.00000000000009400 ) ; +#15578 = ORIENTED_EDGE ( 'NONE', *, *, #20974, .T. ) ; +#15579 = CARTESIAN_POINT ( 'NONE', ( 16.93476732735772200, 11.64004081115111700, -28.51837550109419800 ) ) ; +#15580 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656715200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#15581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15582 = AXIS2_PLACEMENT_3D ( 'NONE', #80638, #43353, #6116 ) ; +#15583 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459542900, 89.08026449164336200, -28.70555803802997700 ) ) ; +#15584 = EDGE_CURVE ( 'NONE', #26075, #42672, #17590, .T. ) ; +#15585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55626, #49345, #36851, #18385 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534732500 ), + .UNSPECIFIED. ) ; +#15586 = EDGE_CURVE ( 'NONE', #37510, #71559, #44566, .T. ) ; +#15587 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818145900, 89.94924284854691600, -28.20555803803031100 ) ) ; +#15589 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 75.79999999999999700, -28.70525300642875200 ) ) ; +#15588 = AXIS2_PLACEMENT_3D ( 'NONE', #30440, #73950, #36655 ) ; +#15590 = CIRCLE ( 'NONE', #13325, 10.00000000000009200 ) ; +#15591 = ORIENTED_EDGE ( 'NONE', *, *, #39645, .T. ) ; +#15592 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853718400, 60.34267608797617300, -28.20555803803014400 ) ) ; +#15593 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#15594 = VERTEX_POINT ( 'NONE', #80243 ) ; +#15595 = AXIS2_PLACEMENT_3D ( 'NONE', #7544, #51044, #13849 ) ; +#15596 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15598 = VERTEX_POINT ( 'NONE', #42960 ) ; +#15599 = CONICAL_SURFACE ( 'NONE', #53231, 10.00000000000009200, 0.7853981633974447300 ) ; +#15600 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ; +#15601 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 51.25732391202398500, -28.20555803802997700 ) ) ; +#15602 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489073600, 39.47143078992715500, -28.37063977681167500 ) ) ; +#15603 = AXIS2_PLACEMENT_3D ( 'NONE', #78000, #40722, #3448 ) ; +#15604 = ORIENTED_EDGE ( 'NONE', *, *, #44080, .T. ) ; +#15605 = ORIENTED_EDGE ( 'NONE', *, *, #25233, .F. ) ; +#15606 = VERTEX_POINT ( 'NONE', #36715 ) ; +#15607 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 71.43650294695130800, -28.30782889147482400 ) ) ; +#15608 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.31066373133501900, -28.53923937255168800 ) ) ; +#15610 = VERTEX_POINT ( 'NONE', #61771 ) ; +#15609 = EDGE_CURVE ( 'NONE', #5676, #62599, #30213, .T. ) ; +#15611 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15612 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15613 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384643800, 60.79999999999999700, -28.55171188418380600 ) ) ; +#15614 = AXIS2_PLACEMENT_3D ( 'NONE', #60599, #9698, #34460 ) ; +#15615 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 77.94142842854310500, -28.20555803802997700 ) ) ; +#15616 = AXIS2_PLACEMENT_3D ( 'NONE', #24082, #55320, #11836 ) ; +#15617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15618 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15619 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260014300, 28.70034312068832000, -28.70555803803001600 ) ) ; +#15620 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390051800, 80.13716795162663700, -28.48697406221650000 ) ) ; +#15621 = FACE_OUTER_BOUND ( 'NONE', #18156, .T. ) ; +#15622 = ORIENTED_EDGE ( 'NONE', *, *, #74216, .F. ) ; +#15623 = CARTESIAN_POINT ( 'NONE', ( 3.839550451718965400, 70.46231468379670600, -28.37082013777849100 ) ) ; +#15624 = CARTESIAN_POINT ( 'NONE', ( 16.41529105773326300, 94.43058211546652100, -28.29658534940813700 ) ) ; +#15625 = ORIENTED_EDGE ( 'NONE', *, *, #14491, .T. ) ; +#15626 = ORIENTED_EDGE ( 'NONE', *, *, #5432, .T. ) ; +#15627 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#15628 = ORIENTED_EDGE ( 'NONE', *, *, #71308, .F. ) ; +#15629 = ORIENTED_EDGE ( 'NONE', *, *, #67030, .F. ) ; +#15630 = ORIENTED_EDGE ( 'NONE', *, *, #73732, .T. ) ; +#15631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15632 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714282900, 33.17681279774500800, -28.70555803802996700 ) ) ; +#15633 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15634 = CONICAL_SURFACE ( 'NONE', #1895, 10.50000000000009400, 0.7853981633974500600 ) ; +#15635 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465429700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#15636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25425, #37890, #56672, #19412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318542003200, 0.001296017758336663000 ), + .UNSPECIFIED. ) ; +#15638 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#15639 = EDGE_LOOP ( 'NONE', ( #55270, #35386, #60372, #65017 ) ) ; +#15640 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.16749699759769500, -28.20555803802997700 ) ) ; +#15641 = AXIS2_PLACEMENT_3D ( 'NONE', #7771, #63583, #57307 ) ; +#15642 = CIRCLE ( 'NONE', #50866, 9.500000000000099500 ) ; +#15643 = ORIENTED_EDGE ( 'NONE', *, *, #57722, .F. ) ; +#15644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35866, #54624, #73408, #36141 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674078216800E-007, 0.0007987728781051947900 ), + .UNSPECIFIED. ) ; +#15645 = ORIENTED_EDGE ( 'NONE', *, *, #73844, .T. ) ; +#15646 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159366200, 19.19809558586000300, -28.70555803803002000 ) ) ; +#15647 = ADVANCED_FACE ( 'NONE', ( #77914 ), #75943, .T. ) ; +#15648 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 64.00000000000000000, 6.794441961969995200 ) ) ; +#15649 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#15650 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849378300, 18.27966528189956800, -28.30868034705242300 ) ) ; +#15651 = ADVANCED_FACE ( 'NONE', ( #63336 ), #42845, .F. ) ; +#15652 = EDGE_CURVE ( 'NONE', #50836, #40939, #59420, .T. ) ; +#15653 = AXIS2_PLACEMENT_3D ( 'NONE', #28698, #9605, #34918 ) ; +#15654 = FACE_OUTER_BOUND ( 'NONE', #44344, .T. ) ; +#15655 = ORIENTED_EDGE ( 'NONE', *, *, #28380, .F. ) ; +#15656 = ORIENTED_EDGE ( 'NONE', *, *, #77623, .F. ) ; +#15657 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280409800, 53.65857157145701700, -28.37229765499284500 ) ) ; +#15658 = ORIENTED_EDGE ( 'NONE', *, *, #10001, .F. ) ; +#15660 = ADVANCED_FACE ( 'NONE', ( #61392 ), #74023, .T. ) ; +#15659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51299, #26626, #20626, #64158 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001738906318342038600, 0.001775972851782183000 ), + .UNSPECIFIED. ) ; +#15661 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15662 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312769300, 20.49769010897089000, -28.61774594593775900 ) ) ; +#15663 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 35.33333333333332900, -10.73183747965883100 ) ) ; +#15664 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#15665 = FACE_OUTER_BOUND ( 'NONE', #6795, .T. ) ; +#15666 = ORIENTED_EDGE ( 'NONE', *, *, #11298, .F. ) ; +#15667 = ORIENTED_EDGE ( 'NONE', *, *, #71076, .F. ) ; +#15668 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#15669 = EDGE_CURVE ( 'NONE', #79993, #66435, #26348, .T. ) ; +#15670 = CONICAL_SURFACE ( 'NONE', #24532, 10.50000000000009600, 0.7853981633974518300 ) ; +#15671 = EDGE_CURVE ( 'NONE', #9002, #47477, #15720, .T. ) ; +#15672 = ORIENTED_EDGE ( 'NONE', *, *, #10219, .F. ) ; +#15673 = CARTESIAN_POINT ( 'NONE', ( -16.73480054885321500, 93.96533537256799200, -28.43148288769089400 ) ) ; +#15674 = EDGE_LOOP ( 'NONE', ( #79720, #17088, #15455 ) ) ; +#15675 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100920200, 17.62363993080121800, -28.38670679782147100 ) ) ; +#15676 = ORIENTED_EDGE ( 'NONE', *, *, #43667, .T. ) ; +#15677 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15678 = VERTEX_POINT ( 'NONE', #18765 ) ; +#15679 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.93250300240229200, -28.20555803802996700 ) ) ; +#15680 = CONICAL_SURFACE ( 'NONE', #58846, 10.50000000000009600, 0.7853981633974500600 ) ; +#15681 = EDGE_CURVE ( 'NONE', #79302, #24408, #9778, .T. ) ; +#15682 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6452, #37705, #43947, #6718 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153195783818300E-007, 0.0003300514678516543800 ), + .UNSPECIFIED. ) ; +#15683 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998400, 91.59999999999998000, -28.70555803803001300 ) ) ; +#15684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15685 = EDGE_CURVE ( 'NONE', #15109, #32984, #21503, .T. ) ; +#15686 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 31.12753447840886900, -28.38801640354855500 ) ) ; +#15687 = AXIS2_PLACEMENT_3D ( 'NONE', #71305, #27830, #3021 ) ; +#15688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15689 = CIRCLE ( 'NONE', #46262, 9.500000000000101300 ) ; +#15690 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807245900, 86.80000000000004000, -28.70555803803014400 ) ) ; +#15691 = ORIENTED_EDGE ( 'NONE', *, *, #10001, .T. ) ; +#15692 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, -2.333333333333325900, 2.794441961969992100 ) ) ; +#15693 = ORIENTED_EDGE ( 'NONE', *, *, #75490, .T. ) ; +#15694 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15695 = CARTESIAN_POINT ( 'NONE', ( 16.42212147479892800, 20.48660297389273300, -28.58281552185033200 ) ) ; +#15696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15697 = EDGE_LOOP ( 'NONE', ( #7614, #69852, #26879, #51550 ) ) ; +#15698 = ORIENTED_EDGE ( 'NONE', *, *, #12465, .F. ) ; +#15699 = EDGE_LOOP ( 'NONE', ( #12826, #89, #37739 ) ) ; +#15700 = ORIENTED_EDGE ( 'NONE', *, *, #57478, .F. ) ; +#15701 = ORIENTED_EDGE ( 'NONE', *, *, #67643, .T. ) ; +#15702 = FACE_OUTER_BOUND ( 'NONE', #75147, .T. ) ; +#15703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15705 = AXIS2_PLACEMENT_3D ( 'NONE', #66989, #79503, #23469 ) ; +#15706 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492303500, 78.56055603621115300, -28.70555803803004500 ) ) ; +#15707 = EDGE_CURVE ( 'NONE', #27318, #57451, #1233, .T. ) ; +#15708 = EDGE_CURVE ( 'NONE', #30021, #55748, #44757, .T. ) ; +#15709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15710 = EDGE_CURVE ( 'NONE', #30914, #54616, #67573, .T. ) ; +#15711 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753500, 49.07379779496241000, -28.70555803802996700 ) ) ; +#15712 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#15713 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100679500, 38.62363993080087700, -28.38670679782167700 ) ) ; +#15714 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999954900, 81.43250300240198700, -28.20555803803047800 ) ) ; +#15715 = AXIS2_PLACEMENT_3D ( 'NONE', #25664, #6599, #604 ) ; +#15716 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609210100, 46.18533208989799700, -28.53910738522641900 ) ) ; +#15717 = FACE_OUTER_BOUND ( 'NONE', #44050, .T. ) ; +#15718 = ORIENTED_EDGE ( 'NONE', *, *, #55112, .F. ) ; +#15719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15720 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31021, #43488, #62295, #25027 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438961565800E-007, 0.0007763347809200308400 ), + .UNSPECIFIED. ) ; +#15721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15722 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965575000, 41.67701665379186000, -28.20555803802996700 ) ) ; +#15723 = EDGE_CURVE ( 'NONE', #45282, #79655, #53084, .T. ) ; +#15724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15725 = AXIS2_PLACEMENT_3D ( 'NONE', #13523, #75504, #26035 ) ; +#15726 = AXIS2_PLACEMENT_3D ( 'NONE', #62800, #25540, #69032 ) ; +#15727 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15728 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#15729 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15730 = ADVANCED_FACE ( 'NONE', ( #11735 ), #55494, .F. ) ; +#15731 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510359800, 18.15930907398620400, -28.35186440610855700 ) ) ; +#15732 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 7.000000000000008900, -1.205558038030002800 ) ) ; +#15733 = ORIENTED_EDGE ( 'NONE', *, *, #36472, .T. ) ; +#15734 = EDGE_LOOP ( 'NONE', ( #61773, #33867, #5884, #19020, #43303, #4524 ) ) ; +#15735 = ORIENTED_EDGE ( 'NONE', *, *, #47355, .F. ) ; +#15736 = ADVANCED_FACE ( 'NONE', ( #7791 ), #22423, .T. ) ; +#15737 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 41.33333333333335000, -3.705558038030004400 ) ) ; +#15738 = AXIS2_PLACEMENT_3D ( 'NONE', #75208, #37924, #666 ) ; +#15739 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116440500, 30.89435118792235400, -28.41114655922301000 ) ) ; +#15740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15741 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 6.333333333333343700, -5.205558038030008400 ) ) ; +#15742 = CIRCLE ( 'NONE', #74215, 9.500000000000095900 ) ; +#15743 = AXIS2_PLACEMENT_3D ( 'NONE', #42932, #5679, #49169 ) ; +#15744 = ORIENTED_EDGE ( 'NONE', *, *, #42049, .T. ) ; +#15745 = ORIENTED_EDGE ( 'NONE', *, *, #21526, .T. ) ; +#15746 = CARTESIAN_POINT ( 'NONE', ( 5.303217860097056800, 44.44999999999985400, 4.924736786636098700 ) ) ; +#15747 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504964700, 41.90771342879323000, -28.53891855579989600 ) ) ; +#15749 = EDGE_CURVE ( 'NONE', #25677, #9298, #28317, .T. ) ; +#15748 = VERTEX_POINT ( 'NONE', #32081 ) ; +#15750 = CIRCLE ( 'NONE', #37482, 9.500000000000097700 ) ; +#15751 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 43.66666666666667900, 8.320721403598824400 ) ) ; +#15752 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#15753 = VERTEX_POINT ( 'NONE', #25842 ) ; +#15754 = ORIENTED_EDGE ( 'NONE', *, *, #42441, .T. ) ; +#15755 = ORIENTED_EDGE ( 'NONE', *, *, #58923, .T. ) ; +#15756 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718941400, 80.46231468379672000, -28.37082013777818200 ) ) ; +#15757 = VERTEX_POINT ( 'NONE', #1047 ) ; +#15758 = ORIENTED_EDGE ( 'NONE', *, *, #3751, .F. ) ; +#15759 = AXIS2_PLACEMENT_3D ( 'NONE', #34369, #77878, #40600 ) ; +#15760 = CONICAL_SURFACE ( 'NONE', #50950, 10.50000000000009400, 0.7853981633974500600 ) ; +#15761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#15762 = PLANE ( 'NONE', #52759 ) ; +#15763 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#15765 = ADVANCED_FACE ( 'NONE', ( #38929 ), #53557, .F. ) ; +#15764 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70947, #27462, #2655, #46170 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#15766 = CARTESIAN_POINT ( 'NONE', ( 2.279830764156531000, 93.70089248718052500, -28.49656562070742900 ) ) ; +#15767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15768 = ORIENTED_EDGE ( 'NONE', *, *, #58451, .T. ) ; +#15769 = CONICAL_SURFACE ( 'NONE', #59300, 10.50000000000009400, 0.7853981633974500600 ) ; +#15770 = AXIS2_PLACEMENT_3D ( 'NONE', #34289, #77792, #40523 ) ; +#15771 = VERTEX_POINT ( 'NONE', #26114 ) ; +#15772 = CARTESIAN_POINT ( 'NONE', ( -9.219797288041373700, 32.09027028261147800, -28.70555803803065900 ) ) ; +#15773 = CARTESIAN_POINT ( 'NONE', ( 4.512589988548848300, 70.12140959736002800, -28.55996453402207200 ) ) ; +#15774 = VERTEX_POINT ( 'NONE', #69591 ) ; +#15775 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534610700, 50.49920551340398600, -28.70555803802996700 ) ) ; +#15776 = ORIENTED_EDGE ( 'NONE', *, *, #7547, .F. ) ; +#15777 = ORIENTED_EDGE ( 'NONE', *, *, #21665, .F. ) ; +#15778 = CIRCLE ( 'NONE', #16372, 10.00000000000009400 ) ; +#15779 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819191100, 59.94924284854719300, -28.20555803802997700 ) ) ; +#15780 = EDGE_LOOP ( 'NONE', ( #22268, #2298, #10792, #4372 ) ) ; +#15781 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389500, 28.66349705304866500, -28.30782889147480900 ) ) ; +#15782 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#15783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15784 = ORIENTED_EDGE ( 'NONE', *, *, #37221, .T. ) ; +#15785 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15786 = EDGE_CURVE ( 'NONE', #19369, #48984, #5875, .T. ) ; +#15787 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 47.16666666666667900, -9.205558038030003900 ) ) ; +#15788 = FACE_OUTER_BOUND ( 'NONE', #19008, .T. ) ; +#15789 = ORIENTED_EDGE ( 'NONE', *, *, #44853, .T. ) ; +#15790 = ORIENTED_EDGE ( 'NONE', *, *, #16560, .F. ) ; +#15791 = EDGE_CURVE ( 'NONE', #50836, #32412, #38609, .T. ) ; +#15792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15793 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.49747404049736600, -28.26641963845862500 ) ) ; +#15794 = CARTESIAN_POINT ( 'NONE', ( 9.042760264135456100, 75.79999999999999700, -28.53819074160683700 ) ) ; +#15795 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 52.31032580521100100, -28.59353418718932400 ) ) ; +#15796 = EDGE_CURVE ( 'NONE', #26055, #20370, #24202, .T. ) ; +#15797 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 35.04999999999997600, -28.20555803802995200 ) ) ; +#15798 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 36.22261628933270600, -28.70555803802995200 ) ) ; +#15799 = EDGE_CURVE ( 'NONE', #65615, #12694, #9727, .T. ) ; +#15800 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 51.83333333333333600, -3.349151577478984600 ) ) ; +#15801 = EDGE_CURVE ( 'NONE', #11954, #57642, #24372, .T. ) ; +#15802 = ORIENTED_EDGE ( 'NONE', *, *, #66179, .T. ) ; +#15803 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59070, #34058, #52246, #65376 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921219849200E-007, 0.0004084731003434238000 ), + .UNSPECIFIED. ) ; +#15804 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507525200, 39.70543520232828200, -28.70555803802995200 ) ) ; +#15805 = ORIENTED_EDGE ( 'NONE', *, *, #30484, .F. ) ; +#15806 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#15807 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 12.33333333333334800, 5.722645192245503900 ) ) ; +#15808 = CARTESIAN_POINT ( 'NONE', ( 22.32983539147311400, 95.26474478981334900, -25.50947942246512700 ) ) ; +#15809 = AXIS2_PLACEMENT_3D ( 'NONE', #34929, #78444, #41157 ) ; +#15810 = EDGE_CURVE ( 'NONE', #10085, #65265, #70079, .T. ) ; +#15811 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 80.16749699759769500, -28.20555803802997700 ) ) ; +#15812 = EDGE_CURVE ( 'NONE', #63311, #27463, #76034, .T. ) ; +#15813 = EDGE_CURVE ( 'NONE', #26957, #24420, #72080, .T. ) ; +#15814 = ORIENTED_EDGE ( 'NONE', *, *, #78005, .F. ) ; +#15815 = ADVANCED_FACE ( 'NONE', ( #40913 ), #35092, .T. ) ; +#15816 = FACE_OUTER_BOUND ( 'NONE', #28031, .T. ) ; +#15817 = ORIENTED_EDGE ( 'NONE', *, *, #33598, .T. ) ; +#15818 = LINE ( 'NONE', #51660, #1212 ) ; +#15819 = ORIENTED_EDGE ( 'NONE', *, *, #63124, .T. ) ; +#15820 = AXIS2_PLACEMENT_3D ( 'NONE', #69488, #32238, #75737 ) ; +#15821 = CARTESIAN_POINT ( 'NONE', ( -3.360497072202757200, 9.932503002402294000, -28.25438406275897700 ) ) ; +#15822 = FACE_OUTER_BOUND ( 'NONE', #6691, .T. ) ; +#15823 = EDGE_LOOP ( 'NONE', ( #48905, #35167, #40795, #5810, #71391, #43078 ) ) ; +#15824 = VERTEX_POINT ( 'NONE', #51870 ) ; +#15825 = ADVANCED_FACE ( 'NONE', ( #51562 ), #1940, .T. ) ; +#15826 = AXIS2_PLACEMENT_3D ( 'NONE', #28933, #53632, #66159 ) ; +#15827 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 15.66666666666667100, -3.705558038030004400 ) ) ; +#15828 = EDGE_LOOP ( 'NONE', ( #40298, #64213, #68750, #27333 ) ) ; +#15829 = AXIS2_PLACEMENT_3D ( 'NONE', #706, #44187, #6963 ) ; +#15830 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 39.53085164125334900, -28.45573375118225500 ) ) ; +#15831 = AXIS2_PLACEMENT_3D ( 'NONE', #37768, #508, #44006 ) ; +#15832 = CIRCLE ( 'NONE', #76477, 10.00000000000009600 ) ; +#15833 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596400, 63.65857157145701700, -28.37229765499279600 ) ) ; +#15834 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873313000, 51.70803673496085700, -28.29033182162406100 ) ) ; +#15835 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 55.83333333333334300, -3.349151577478984600 ) ) ; +#15836 = ORIENTED_EDGE ( 'NONE', *, *, #35029, .F. ) ; +#15837 = FACE_OUTER_BOUND ( 'NONE', #43665, .T. ) ; +#15838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#15839 = EDGE_LOOP ( 'NONE', ( #277, #73579, #2232, #38063, #26136 ) ) ; +#15840 = ADVANCED_FACE ( 'NONE', ( #3908 ), #49604, .T. ) ; +#15841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15842 = ORIENTED_EDGE ( 'NONE', *, *, #60160, .F. ) ; +#15843 = ORIENTED_EDGE ( 'NONE', *, *, #79688, .F. ) ; +#15844 = ORIENTED_EDGE ( 'NONE', *, *, #51022, .T. ) ; +#15845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15846 = CIRCLE ( 'NONE', #8462, 10.00000000000009200 ) ; +#15847 = ORIENTED_EDGE ( 'NONE', *, *, #61393, .F. ) ; +#15848 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#15849 = CONICAL_SURFACE ( 'NONE', #63308, 10.50000000000009600, 0.7853981633974500600 ) ; +#15850 = AXIS2_PLACEMENT_3D ( 'NONE', #72975, #35706, #79233 ) ; +#15851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15852 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#15853 = ADVANCED_FACE ( 'NONE', ( #57458 ), #33412, .T. ) ; +#15854 = EDGE_LOOP ( 'NONE', ( #77955, #69942, #23884, #38740 ) ) ; +#15855 = CARTESIAN_POINT ( 'NONE', ( -4.720904428264064200, 71.50050415885242200, -28.63287458792239800 ) ) ; +#15856 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528178400, 49.63131911501876200, -28.51286550264510900 ) ) ; +#15857 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 4.999999999999997300, 8.794441961969989000 ) ) ; +#15858 = CONICAL_SURFACE ( 'NONE', #18967, 10.00000000000009200, 0.7853981633974447300 ) ; +#15859 = ORIENTED_EDGE ( 'NONE', *, *, #29703, .T. ) ; +#15861 = EDGE_CURVE ( 'NONE', #32055, #11576, #61605, .T. ) ; +#15860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49771, #6291, #43790, #6560 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549582421179300E-007, 0.0002592578639937846500 ), + .UNSPECIFIED. ) ; +#15862 = FACE_OUTER_BOUND ( 'NONE', #80210, .T. ) ; +#15863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15865 = AXIS2_PLACEMENT_3D ( 'NONE', #9810, #53315, #16066 ) ; +#15866 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59232, #15457, #28272, #71765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553009007500E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#15868 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#15869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15870 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15871 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#15872 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 39.37705528805138800, -28.20555803802995200 ) ) ; +#15873 = CARTESIAN_POINT ( 'NONE', ( 4.455700387078236300, 9.030944946790985000, -28.65917496040402300 ) ) ; +#15874 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 71.65075715145309200, -28.20555803802998100 ) ) ; +#15875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15876 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957530300, 48.50972971738993800, -28.70555803802997000 ) ) ; +#15877 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61189, #36396, #55168, #17919 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760853711300, 0.0007596411030271312300 ), + .UNSPECIFIED. ) ; +#15879 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462466400, 71.39409401757626500, -28.39369363572361800 ) ) ; +#15880 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#15881 = AXIS2_PLACEMENT_3D ( 'NONE', #60548, #66792, #17024 ) ; +#15882 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285726000, 47.42318720225497200, -28.70555803802996700 ) ) ; +#15883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15884 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#15885 = ORIENTED_EDGE ( 'NONE', *, *, #49922, .T. ) ; +#15886 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15890 = AXIS2_PLACEMENT_3D ( 'NONE', #16651, #4127, #28938 ) ; +#15891 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77835, #3560, #54711, #17464 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192577241100 ), + .UNSPECIFIED. ) ; +#15892 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.41070809551059300, -28.20555803802996700 ) ) ; +#15893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15894 = ORIENTED_EDGE ( 'NONE', *, *, #73769, .F. ) ; +#15895 = FACE_OUTER_BOUND ( 'NONE', #30827, .T. ) ; +#15896 = ORIENTED_EDGE ( 'NONE', *, *, #74899, .T. ) ; +#15897 = CIRCLE ( 'NONE', #76360, 10.00000000000009400 ) ; +#15899 = EDGE_CURVE ( 'NONE', #66045, #19525, #36985, .T. ) ; +#15898 = ORIENTED_EDGE ( 'NONE', *, *, #61685, .F. ) ; +#15900 = ORIENTED_EDGE ( 'NONE', *, *, #25115, .T. ) ; +#15901 = CIRCLE ( 'NONE', #46450, 10.50000000000009400 ) ; +#15902 = EDGE_LOOP ( 'NONE', ( #42814, #51335, #38351 ) ) ; +#15903 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15904 = ORIENTED_EDGE ( 'NONE', *, *, #22975, .F. ) ; +#15905 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 61.83333333333331400, -9.205558038030003900 ) ) ; +#15906 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39301, #33056, #14308, #45527 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649423613700E-007, 0.0007596411030283420700 ), + .UNSPECIFIED. ) ; +#15907 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 51.35277818615432500, -28.70555803802999500 ) ) ; +#15908 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15909 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537141000, 90.20590598242367300, -28.39369363572355800 ) ) ; +#15910 = FACE_OUTER_BOUND ( 'NONE', #32779, .T. ) ; +#15911 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#15912 = ORIENTED_EDGE ( 'NONE', *, *, #36440, .F. ) ; +#15913 = EDGE_CURVE ( 'NONE', #44027, #56903, #68143, .T. ) ; +#15914 = FACE_OUTER_BOUND ( 'NONE', #32612, .T. ) ; +#15915 = EDGE_CURVE ( 'NONE', #79988, #9399, #47080, .T. ) ; +#15916 = ORIENTED_EDGE ( 'NONE', *, *, #60632, .F. ) ; +#15917 = CARTESIAN_POINT ( 'NONE', ( -17.24306493325783400, 81.43482203710631500, -28.29548531138973600 ) ) ; +#15918 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 56.00000000000002100, 6.794441961969996900 ) ) ; +#15919 = EDGE_LOOP ( 'NONE', ( #14684, #3921, #6541 ) ) ; +#15920 = ORIENTED_EDGE ( 'NONE', *, *, #33235, .F. ) ; +#15921 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#15922 = ORIENTED_EDGE ( 'NONE', *, *, #30862, .F. ) ; +#15923 = CONICAL_SURFACE ( 'NONE', #72131, 10.50000000000009600, 0.7853981633974518300 ) ; +#15924 = ADVANCED_FACE ( 'NONE', ( #66222 ), #47671, .T. ) ; +#15925 = AXIS2_PLACEMENT_3D ( 'NONE', #354, #56120, #37607 ) ; +#15926 = ORIENTED_EDGE ( 'NONE', *, *, #21424, .F. ) ; +#15927 = EDGE_CURVE ( 'NONE', #21268, #52802, #32653, .T. ) ; +#15928 = EDGE_CURVE ( 'NONE', #68448, #52291, #64281, .T. ) ; +#15929 = EDGE_CURVE ( 'NONE', #69424, #30550, #18204, .T. ) ; +#15930 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15932 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195907300, 15.94142842854258100, -28.37229765499308700 ) ) ; +#15933 = PLANE ( 'NONE', #47359 ) ; +#15934 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 33.16666666666668600, 9.794441961969994300 ) ) ; +#15935 = EDGE_LOOP ( 'NONE', ( #59066, #32076, #23493 ) ) ; +#15936 = EDGE_CURVE ( 'NONE', #31243, #76771, #16575, .T. ) ; +#15937 = AXIS2_PLACEMENT_3D ( 'NONE', #49696, #55979, #5968 ) ; +#15938 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339004500, 70.13716795162646600, -28.48697406221666000 ) ) ; +#15939 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15940 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650751500, 18.70543520232827800, -28.70555803802992800 ) ) ; +#15941 = ORIENTED_EDGE ( 'NONE', *, *, #9615, .F. ) ; +#15942 = ADVANCED_FACE ( 'NONE', ( #33104 ), #62308, .F. ) ; +#15943 = CIRCLE ( 'NONE', #77915, 9.500000000000101300 ) ; +#15944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15945 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15946 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000412100, 78.17143691309409800, -28.36981695106809600 ) ) ; +#15947 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819155100, 61.65075715145276500, -28.20555803803005900 ) ) ; +#15948 = ADVANCED_FACE ( 'NONE', ( #18511 ), #29265, .F. ) ; +#15949 = AXIS2_PLACEMENT_3D ( 'NONE', #25503, #56479, #62767 ) ; +#15950 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 90.69966441803890700, -28.70555803802997700 ) ) ; +#15951 = AXIS2_PLACEMENT_3D ( 'NONE', #5908, #36887, #43150 ) ; +#15952 = ADVANCED_FACE ( 'NONE', ( #78875 ), #76888, .T. ) ; +#15953 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 22.65857157145701000, -28.20555803802995200 ) ) ; +#15954 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#15955 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15956 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 75.80000000000001100, -28.70555803802997700 ) ) ; +#15957 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 67.66666666666665700, -3.705558038030004400 ) ) ; +#15958 = CIRCLE ( 'NONE', #24235, 9.500000000000099500 ) ; +#15959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15961 = CARTESIAN_POINT ( 'NONE', ( 17.36049707220281500, 20.43250300240229200, -28.25438406275897000 ) ) ; +#15962 = EDGE_LOOP ( 'NONE', ( #57314, #75450, #9579, #66332 ) ) ; +#15963 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109249200, 30.62856921007284000, -28.37063977681167500 ) ) ; +#15964 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431100, 20.67701665379226500, -28.20555803802994200 ) ) ; +#15965 = CARTESIAN_POINT ( 'NONE', ( 16.42208926844538700, 39.11339344823292000, -28.58282679407406900 ) ) ; +#15966 = AXIS2_PLACEMENT_3D ( 'NONE', #71545, #65334, #59025 ) ; +#15967 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 80.16054007504463600, -28.34042301926881200 ) ) ; +#15968 = EDGE_CURVE ( 'NONE', #54053, #862, #3722, .T. ) ; +#15969 = EDGE_LOOP ( 'NONE', ( #5794, #48261, #45061, #50295 ) ) ; +#15970 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300867700, 78.40378923506914100, -28.61864990621754900 ) ) ; +#15971 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.48922577050341000, -28.37255355648633400 ) ) ; +#15972 = VERTEX_POINT ( 'NONE', #15996 ) ; +#15973 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615371300, 50.79999999999999000, -28.55171188418378100 ) ) ; +#15974 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9083, #52330, #15388, #58885 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839426254200 ), + .UNSPECIFIED. ) ; +#15975 = CIRCLE ( 'NONE', #8871, 10.00000000000009400 ) ; +#15976 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#15977 = ORIENTED_EDGE ( 'NONE', *, *, #32018, .T. ) ; +#15978 = CARTESIAN_POINT ( 'NONE', ( -17.26457816485418600, 10.28307383672419700, -28.44650835714144700 ) ) ; +#15979 = CARTESIAN_POINT ( 'NONE', ( -17.04027254440434200, 9.875620219179431600, -28.30310404364066600 ) ) ; +#15980 = FACE_OUTER_BOUND ( 'NONE', #45028, .T. ) ; +#15981 = VERTEX_POINT ( 'NONE', #47226 ) ; +#15982 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15983 = EDGE_CURVE ( 'NONE', #65517, #69763, #70040, .T. ) ; +#15984 = FACE_OUTER_BOUND ( 'NONE', #77794, .T. ) ; +#15985 = FACE_OUTER_BOUND ( 'NONE', #32517, .T. ) ; +#15986 = AXIS2_PLACEMENT_3D ( 'NONE', #32434, #51424, #63743 ) ; +#15988 = ORIENTED_EDGE ( 'NONE', *, *, #34963, .T. ) ; +#15987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15989 = EDGE_LOOP ( 'NONE', ( #6171, #6109, #32520, #73583, #28784 ) ) ; +#15990 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146656900, 31.29130857014956400, -28.37223374938507800 ) ) ; +#15991 = EDGE_LOOP ( 'NONE', ( #76543, #1854, #60959, #5245 ) ) ; +#15992 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#15993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#15994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14907, #2365, #64705, #27443 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447121928900E-007, 0.0002745498510224827000 ), + .UNSPECIFIED. ) ; +#15995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#15996 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 90.69966441803890700, -28.70555803802997700 ) ) ; +#15997 = FACE_OUTER_BOUND ( 'NONE', #42966, .T. ) ; +#15998 = VERTEX_POINT ( 'NONE', #66053 ) ; +#15999 = AXIS2_PLACEMENT_3D ( 'NONE', #71190, #45869, #77176 ) ; +#16000 = CONICAL_SURFACE ( 'NONE', #44011, 10.50000000000009600, 0.7853981633974500600 ) ; +#16001 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16002 = ORIENTED_EDGE ( 'NONE', *, *, #5440, .F. ) ; +#16003 = CARTESIAN_POINT ( 'NONE', ( 10.97683272551929600, 28.58088969930761500, -28.30223898143234300 ) ) ; +#16004 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 30.74660241562181500, -28.20555803802995200 ) ) ; +#16005 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 4.833333333333341900, 1.741883078712340300 ) ) ; +#16006 = ORIENTED_EDGE ( 'NONE', *, *, #57625, .T. ) ; +#16008 = ORIENTED_EDGE ( 'NONE', *, *, #34923, .T. ) ; +#16007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69807, #76054, #51266, #14069 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785989040300, 0.001246815221881866500 ), + .UNSPECIFIED. ) ; +#16009 = ORIENTED_EDGE ( 'NONE', *, *, #55238, .T. ) ; +#16010 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666600, 81.46283204837337200, -28.48697406221659300 ) ) ; +#16011 = ORIENTED_EDGE ( 'NONE', *, *, #6369, .T. ) ; +#16012 = FACE_OUTER_BOUND ( 'NONE', #66047, .T. ) ; +#16013 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 39.16666666666669300, 0.1341879241256129200 ) ) ; +#16014 = AXIS2_PLACEMENT_3D ( 'NONE', #65496, #15696, #21952 ) ; +#16015 = EDGE_LOOP ( 'NONE', ( #68719, #40036, #40646, #59965 ) ) ; +#16016 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666200, 71.46283204837337200, -28.48697406221659600 ) ) ; +#16017 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16018 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78227, #9681, #22197, #40959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487556039100, 0.001085359101287709500 ), + .UNSPECIFIED. ) ; +#16019 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 4.166666666666689200, 0.9380355014189834000 ) ) ; +#16020 = EDGE_LOOP ( 'NONE', ( #43641, #12454, #42252, #30559, #17481, #7723 ) ) ; +#16021 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345325300, 71.32559822014171400, -28.29986836858038000 ) ) ; +#16022 = EDGE_CURVE ( 'NONE', #55596, #17938, #55582, .T. ) ; +#16023 = VERTEX_POINT ( 'NONE', #41265 ) ; +#16024 = CARTESIAN_POINT ( 'NONE', ( 7.947191329399498000, 44.44999999999993900, 2.700542978266089000 ) ) ; +#16025 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16026 = FACE_OUTER_BOUND ( 'NONE', #16992, .T. ) ; +#16027 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 41.50000000000001400, -9.258116921287651700 ) ) ; +#16028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16029 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507590000, 18.70543520232814000, -28.70555803803009500 ) ) ; +#16030 = CARTESIAN_POINT ( 'NONE', ( 2.198586935028790500, 94.72249899919930300, -28.20555803802997700 ) ) ; +#16031 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16032 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 28.66749699759768400, -28.20555803802994200 ) ) ; +#16033 = EDGE_CURVE ( 'NONE', #63749, #66852, #12674, .T. ) ; +#16034 = CONICAL_SURFACE ( 'NONE', #71019, 10.50000000000009600, 0.7853981633974518300 ) ; +#16035 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16036 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16038 = EDGE_CURVE ( 'NONE', #8255, #12176, #41133, .T. ) ; +#16039 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16040 = CARTESIAN_POINT ( 'NONE', ( 4.118917725798677800, 71.10238820582961200, -28.32098513914488100 ) ) ; +#16041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16043 = ORIENTED_EDGE ( 'NONE', *, *, #67772, .F. ) ; +#16042 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 78.39962244433174000, -28.53664883431610400 ) ) ; +#16044 = ADVANCED_FACE ( 'NONE', ( #80797 ), #27275, .T. ) ; +#16045 = CIRCLE ( 'NONE', #53643, 10.50000000000009200 ) ; +#16046 = EDGE_CURVE ( 'NONE', #28119, #28510, #43758, .T. ) ; +#16047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16048 = VERTEX_POINT ( 'NONE', #54041 ) ; +#16049 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6553, #18800, #19321, #62869 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807052700, 0.0005317208426584764800 ), + .UNSPECIFIED. ) ; +#16050 = ADVANCED_FACE ( 'NONE', ( #20471 ), #58401, .T. ) ; +#16051 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 41.24660241562189400, -28.20555803802996700 ) ) ; +#16052 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16053 = EDGE_CURVE ( 'NONE', #26563, #63070, #60371, .T. ) ; +#16054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16055 = CONICAL_SURFACE ( 'NONE', #1025, 10.00000000000009200, 0.7853981633974447300 ) ; +#16056 = AXIS2_PLACEMENT_3D ( 'NONE', #40612, #9612, #46846 ) ; +#16057 = CONICAL_SURFACE ( 'NONE', #48108, 10.50000000000009600, 0.7853981633974518300 ) ; +#16058 = ORIENTED_EDGE ( 'NONE', *, *, #66025, .T. ) ; +#16059 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 45.00000000000001400, 6.794441961969995200 ) ) ; +#16060 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999962700, 54.13556610137262500, -28.54207364681985100 ) ) ; +#16061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16062 = EDGE_LOOP ( 'NONE', ( #464, #11712, #75129, #23974, #36299, #35234, #13509, #2118 ) ) ; +#16063 = LINE ( 'NONE', #32306, #59867 ) ; +#16064 = ORIENTED_EDGE ( 'NONE', *, *, #54037, .F. ) ; +#16065 = ORIENTED_EDGE ( 'NONE', *, *, #17577, .T. ) ; +#16066 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16067 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823698900, 27.69543746431598000, -28.61277292027076100 ) ) ; +#16068 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16069 = AXIS2_PLACEMENT_3D ( 'NONE', #28525, #78254, #9977 ) ; +#16070 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16072 = EDGE_CURVE ( 'NONE', #59880, #61659, #45706, .T. ) ; +#16073 = ADVANCED_FACE ( 'NONE', ( #14611 ), #56425, .F. ) ; +#16074 = EDGE_CURVE ( 'NONE', #25518, #26405, #73008, .T. ) ; +#16076 = FACE_OUTER_BOUND ( 'NONE', #18710, .T. ) ; +#16075 = AXIS2_PLACEMENT_3D ( 'NONE', #14780, #58294, #21053 ) ; +#16077 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16078 = EDGE_LOOP ( 'NONE', ( #56524, #77641, #16986, #25527, #48661 ) ) ; +#16079 = CONICAL_SURFACE ( 'NONE', #61245, 10.00000000000009200, 0.7853981633974447300 ) ; +#16080 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.00000000000000700, -1.205558038030005300 ) ) ; +#16081 = ORIENTED_EDGE ( 'NONE', *, *, #18605, .F. ) ; +#16082 = EDGE_LOOP ( 'NONE', ( #65812, #35464, #20786, #58517, #71719 ) ) ; +#16083 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#16084 = VERTEX_POINT ( 'NONE', #29607 ) ; +#16085 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#16086 = EDGE_LOOP ( 'NONE', ( #49527, #68133, #58019, #21472, #79644 ) ) ; +#16087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16088 = EDGE_CURVE ( 'NONE', #22761, #8083, #26694, .T. ) ; +#16089 = CARTESIAN_POINT ( 'NONE', ( 24.36685387774788600, 96.28340434653246400, -22.20799453357548700 ) ) ; +#16090 = FACE_OUTER_BOUND ( 'NONE', #76626, .T. ) ; +#16091 = AXIS2_PLACEMENT_3D ( 'NONE', #38358, #13399, #44586 ) ; +#16092 = EDGE_LOOP ( 'NONE', ( #49254, #37131, #37742, #66909 ) ) ; +#16093 = AXIS2_PLACEMENT_3D ( 'NONE', #17565, #61088, #23824 ) ; +#16094 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671070000, 89.66414768973950800, -28.38420446581350700 ) ) ; +#16095 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#16096 = ORIENTED_EDGE ( 'NONE', *, *, #20569, .T. ) ; +#16097 = VERTEX_POINT ( 'NONE', #29889 ) ; +#16098 = FACE_OUTER_BOUND ( 'NONE', #53426, .T. ) ; +#16099 = ORIENTED_EDGE ( 'NONE', *, *, #559, .T. ) ; +#16100 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183700, 28.63131911501876900, -28.51286550264508100 ) ) ; +#16101 = ORIENTED_EDGE ( 'NONE', *, *, #79595, .T. ) ; +#16102 = FACE_OUTER_BOUND ( 'NONE', #2761, .T. ) ; +#16103 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3141, #40418, #9407, #52918 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464073500, 0.001179659862024337800 ), + .UNSPECIFIED. ) ; +#16104 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998600, 11.47376207875059600, -28.70555803802994200 ) ) ; +#16105 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 13.50000000000000900, 2.454695999814380200 ) ) ; +#16106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16107 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#16108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16109 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 53.66666666666667900, 2.794441961969992100 ) ) ; +#16110 = AXIS2_PLACEMENT_3D ( 'NONE', #72702, #35448, #78963 ) ; +#16111 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16112 = FACE_OUTER_BOUND ( 'NONE', #25244, .T. ) ; +#16113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16114 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290118500, 28.56267502090521000, -28.41043597897435500 ) ) ; +#16115 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#16116 = ORIENTED_EDGE ( 'NONE', *, *, #79498, .F. ) ; +#16117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16118 = ORIENTED_EDGE ( 'NONE', *, *, #37706, .T. ) ; +#16119 = FACE_OUTER_BOUND ( 'NONE', #46182, .T. ) ; +#16120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16121 = AXIS2_PLACEMENT_3D ( 'NONE', #24379, #67886, #30649 ) ; +#16122 = ORIENTED_EDGE ( 'NONE', *, *, #53958, .F. ) ; +#16123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#16124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7638, #63448, #20188, #63719, #26461, #69932 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001586792886075440100, 0.003173585772150880200 ), + .UNSPECIFIED. ) ; +#16125 = ADVANCED_FACE ( 'NONE', ( #8724 ), #36105, .T. ) ; +#16126 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#16127 = EDGE_CURVE ( 'NONE', #21332, #2505, #12221, .T. ) ; +#16128 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 30.93250300240228900, -28.20555803802996700 ) ) ; +#16129 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701300, 38.19543746431600800, -28.61277292027075700 ) ) ; +#16130 = FACE_OUTER_BOUND ( 'NONE', #59971, .T. ) ; +#16131 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#16132 = FACE_OUTER_BOUND ( 'NONE', #65577, .T. ) ; +#16133 = AXIS2_PLACEMENT_3D ( 'NONE', #31106, #12598, #56093 ) ; +#16134 = ORIENTED_EDGE ( 'NONE', *, *, #17121, .F. ) ; +#16135 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.23237991241948900, -28.26633708900883900 ) ) ; +#16136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16138 = CONICAL_SURFACE ( 'NONE', #70316, 10.00000000000009200, 0.7853981633974447300 ) ; +#16139 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671657500, 71.93585231025936400, -28.38420446581302100 ) ) ; +#16140 = ORIENTED_EDGE ( 'NONE', *, *, #7830, .F. ) ; +#16141 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#16142 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044300, 62.51973550835661100, -28.70555803802997400 ) ) ; +#16143 = EDGE_LOOP ( 'NONE', ( #8243, #3093, #10199 ) ) ; +#16144 = ADVANCED_FACE ( 'NONE', ( #25317 ), #23359, .T. ) ; +#16145 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432849900, 28.85339758437810100, -28.20555803802994200 ) ) ; +#16146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16147 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032800, 20.44069092601377900, -28.35186440610856800 ) ) ; +#16148 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 61.08083798124328500, -28.45106778992438000 ) ) ; +#16149 = CARTESIAN_POINT ( 'NONE', ( -3.778842085587705400, 30.93523632220588100, -28.30315276798566500 ) ) ; +#16150 = CARTESIAN_POINT ( 'NONE', ( 8.705837858217821100, 35.05000000000000400, -28.37136602294609100 ) ) ; +#16151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30972, #6204, #24974, #68491 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185642300E-007, 0.001119324643800063300 ), + .UNSPECIFIED. ) ; +#16152 = CONICAL_SURFACE ( 'NONE', #42013, 10.50000000000009600, 0.7853981633974500600 ) ; +#16153 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462826700, 80.34267608797601700, -28.20555803803030800 ) ) ; +#16154 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819153800, 89.94924284854653300, -28.20555803803030800 ) ) ; +#16155 = CONICAL_SURFACE ( 'NONE', #50716, 10.00000000000009600, 0.7853981633974482800 ) ; +#16156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16157 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 65.67652461701985100, -28.70555803803014400 ) ) ; +#16158 = ORIENTED_EDGE ( 'NONE', *, *, #47849, .T. ) ; +#16159 = EDGE_CURVE ( 'NONE', #14357, #44976, #78566, .T. ) ; +#16160 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909800, 84.83849307182683200, -28.68631150211663100 ) ) ; +#16161 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#16162 = ORIENTED_EDGE ( 'NONE', *, *, #73734, .T. ) ; +#16163 = ORIENTED_EDGE ( 'NONE', *, *, #53929, .F. ) ; +#16164 = EDGE_CURVE ( 'NONE', #18144, #33093, #64094, .T. ) ; +#16165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16166 = EDGE_LOOP ( 'NONE', ( #56633, #33744, #47874, #39908, #10374, #25300 ) ) ; +#16167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16168 = ORIENTED_EDGE ( 'NONE', *, *, #41898, .F. ) ; +#16169 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 61.46283204837340000, -28.48697406221667400 ) ) ; +#16170 = CONICAL_SURFACE ( 'NONE', #47875, 10.50000000000009600, 0.7853981633974518300 ) ; +#16171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16172 = PLANE ( 'NONE', #73867 ) ; +#16173 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 80.34267608797551900, -28.20555803803014400 ) ) ; +#16174 = ORIENTED_EDGE ( 'NONE', *, *, #3143, .T. ) ; +#16175 = EDGE_CURVE ( 'NONE', #12645, #36217, #49554, .T. ) ; +#16176 = ADVANCED_FACE ( 'NONE', ( #41834 ), #42870, .T. ) ; +#16177 = EDGE_CURVE ( 'NONE', #35392, #40820, #74941, .T. ) ; +#16178 = FACE_OUTER_BOUND ( 'NONE', #15639, .T. ) ; +#16179 = AXIS2_PLACEMENT_3D ( 'NONE', #11911, #18157, #48863 ) ; +#16180 = ORIENTED_EDGE ( 'NONE', *, *, #63834, .T. ) ; +#16181 = VERTEX_POINT ( 'NONE', #55375 ) ; +#16182 = CIRCLE ( 'NONE', #2700, 10.50000000000009600 ) ; +#16183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75628, #32122, #1098, #44564 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957553771200E-005, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#16184 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 59.66666666666667100, 5.722645192245505700 ) ) ; +#16185 = EDGE_CURVE ( 'NONE', #45995, #65731, #31173, .T. ) ; +#16186 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#16188 = VERTEX_POINT ( 'NONE', #80429 ) ; +#16187 = EDGE_CURVE ( 'NONE', #8719, #23425, #39892, .T. ) ; +#16189 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914525200, 59.77559325427176200, -28.45987523529584700 ) ) ; +#16190 = EDGE_CURVE ( 'NONE', #22296, #58612, #6796, .T. ) ; +#16191 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671989700, 89.66414768974077300, -28.38420446581270100 ) ) ; +#16192 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260044700, 81.39965687931167800, -28.70555803803001600 ) ) ; +#16193 = AXIS2_PLACEMENT_3D ( 'NONE', #59212, #21962, #65507 ) ; +#16194 = CIRCLE ( 'NONE', #24567, 10.00000000000009200 ) ; +#16195 = EDGE_LOOP ( 'NONE', ( #46176, #60047, #54839 ) ) ; +#16196 = CARTESIAN_POINT ( 'NONE', ( -2.572261083207502800, 8.799999999999828400, -28.63329695482267900 ) ) ; +#16197 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448990000, 53.83333333333333600, -9.205558038030005700 ) ) ; +#16198 = FACE_OUTER_BOUND ( 'NONE', #77642, .T. ) ; +#16199 = ORIENTED_EDGE ( 'NONE', *, *, #49298, .T. ) ; +#16200 = EDGE_CURVE ( 'NONE', #70161, #77385, #54488, .T. ) ; +#16201 = VERTEX_POINT ( 'NONE', #80684 ) ; +#16202 = FACE_OUTER_BOUND ( 'NONE', #16636, .T. ) ; +#16203 = AXIS2_PLACEMENT_3D ( 'NONE', #80000, #5471, #36454 ) ; +#16204 = AXIS2_PLACEMENT_3D ( 'NONE', #13113, #31871, #69115 ) ; +#16205 = VERTEX_POINT ( 'NONE', #68443 ) ; +#16206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16208 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16209 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188001000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#16210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16211 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 31.00000000000002500, -12.20555803803000200 ) ) ; +#16212 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16213 = FACE_OUTER_BOUND ( 'NONE', #78503, .T. ) ; +#16214 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#16215 = FACE_OUTER_BOUND ( 'NONE', #79174, .T. ) ; +#16216 = ORIENTED_EDGE ( 'NONE', *, *, #55478, .T. ) ; +#16217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16219 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16220 = ORIENTED_EDGE ( 'NONE', *, *, #51872, .F. ) ; +#16221 = CARTESIAN_POINT ( 'NONE', ( -15.51770601915500700, 8.964587961689979100, -28.65180968932673600 ) ) ; +#16222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16223 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#16224 = EDGE_LOOP ( 'NONE', ( #45522, #10475, #64826, #25392, #42086 ) ) ; +#16225 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 71.82440674572814000, -28.45987523529581900 ) ) ; +#16226 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65595, #22063, #34577, #78083 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799586875300E-007, 0.0005050252131287614800 ), + .UNSPECIFIED. ) ; +#16227 = ADVANCED_FACE ( 'NONE', ( #21417 ), #19446, .F. ) ; +#16228 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16229 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471852700, 30.96868088498121800, -28.51286550264511600 ) ) ; +#16230 = CIRCLE ( 'NONE', #17872, 10.50000000000009600 ) ; +#16231 = AXIS2_PLACEMENT_3D ( 'NONE', #1700, #45190, #7960 ) ; +#16232 = ORIENTED_EDGE ( 'NONE', *, *, #38293, .F. ) ; +#16233 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181919600, 61.65075715145310700, -28.20555803802997700 ) ) ; +#16234 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 65.50000000000000000, 2.454695999814380200 ) ) ; +#16235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16236 = VERTEX_POINT ( 'NONE', #161 ) ; +#16237 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752718500, 72.08770193146119700, -28.47147304844863300 ) ) ; +#16238 = CARTESIAN_POINT ( 'NONE', ( -4.745342735184513200, 10.00380841767820600, -28.64142799534452200 ) ) ; +#16239 = ORIENTED_EDGE ( 'NONE', *, *, #73027, .T. ) ; +#16240 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#16241 = ORIENTED_EDGE ( 'NONE', *, *, #9465, .T. ) ; +#16242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16243 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655685100, 38.92298334620757300, -28.20555803802996000 ) ) ; +#16244 = FACE_OUTER_BOUND ( 'NONE', #36082, .T. ) ; +#16245 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729972900, 90.01262610361081300, -28.29936525552473000 ) ) ; +#16246 = ADVANCED_FACE ( 'NONE', ( #37917 ), #74707, .T. ) ; +#16247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16248 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16249 = AXIS2_PLACEMENT_3D ( 'NONE', #73232, #35950, #79486 ) ; +#16251 = ORIENTED_EDGE ( 'NONE', *, *, #51008, .T. ) ; +#16250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16252 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#16253 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534579100, 50.49920551340399300, -28.70555803802996700 ) ) ; +#16254 = EDGE_CURVE ( 'NONE', #11747, #34668, #35183, .T. ) ; +#16255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16256 = CIRCLE ( 'NONE', #21103, 10.00000000000009200 ) ; +#16257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16258 = CARTESIAN_POINT ( 'NONE', ( 4.745342735184577200, 41.50380841767820800, -28.64142799534457500 ) ) ; +#16259 = AXIS2_PLACEMENT_3D ( 'NONE', #31183, #49886, #141 ) ; +#16260 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274716100, 35.04999999999996900, -28.20555803802995200 ) ) ; +#16261 = ADVANCED_FACE ( 'NONE', ( #52509 ), #50542, .T. ) ; +#16262 = VERTEX_POINT ( 'NONE', #43924 ) ; +#16263 = CONICAL_SURFACE ( 'NONE', #63157, 10.50000000000009600, 0.7853981633974500600 ) ; +#16264 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#16265 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818954800, 89.94924284854707300, -28.20555803802997700 ) ) ; +#16266 = CIRCLE ( 'NONE', #25674, 9.500000000000099500 ) ; +#16267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16268 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195940100, 33.15857157145701000, -28.37229765499281000 ) ) ; +#16269 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475900, 14.04999999999976600, -28.20555803803009500 ) ) ; +#16270 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 58.16545993132821500, -28.70555803802999500 ) ) ; +#16271 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528182800, 28.63131911501876900, -28.51286550264508100 ) ) ; +#16272 = CARTESIAN_POINT ( 'NONE', ( -3.160449548281036900, 70.46231468379689000, -28.37082013777833100 ) ) ; +#16273 = EDGE_LOOP ( 'NONE', ( #69084, #43671, #13323 ) ) ; +#16274 = ADVANCED_FACE ( 'NONE', ( #4842 ), #17518, .T. ) ; +#16275 = EDGE_CURVE ( 'NONE', #53626, #4132, #34044, .T. ) ; +#16276 = CARTESIAN_POINT ( 'NONE', ( 3.424975528237174300, 92.18241614681680600, -28.70555803803000900 ) ) ; +#16277 = CIRCLE ( 'NONE', #55756, 9.500000000000097700 ) ; +#16279 = VERTEX_POINT ( 'NONE', #68970 ) ; +#16278 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16280 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 2.666666666666682100, -6.705558038030000400 ) ) ; +#16281 = EDGE_CURVE ( 'NONE', #66582, #29982, #2883, .T. ) ; +#16282 = ORIENTED_EDGE ( 'NONE', *, *, #56918, .T. ) ; +#16283 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54922, #11431, #48639, #17683 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278954810000, 0.001517194977238193100 ), + .UNSPECIFIED. ) ; +#16284 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16285 = ORIENTED_EDGE ( 'NONE', *, *, #70973, .T. ) ; +#16286 = CIRCLE ( 'NONE', #14933, 10.50000000000009600 ) ; +#16287 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 37.00000000000001400, -1.205558038030002800 ) ) ; +#16288 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205871200, 41.51754275546393600, -28.27504145778806300 ) ) ; +#16289 = EDGE_CURVE ( 'NONE', #33868, #62327, #20695, .T. ) ; +#16290 = EDGE_LOOP ( 'NONE', ( #16794, #70246, #25199 ) ) ; +#16291 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 2.000000000000001800, -1.205558038030005300 ) ) ; +#16292 = EDGE_CURVE ( 'NONE', #79455, #45092, #69086, .T. ) ; +#16293 = FACE_OUTER_BOUND ( 'NONE', #70145, .T. ) ; +#16294 = ORIENTED_EDGE ( 'NONE', *, *, #39728, .T. ) ; +#16295 = EDGE_CURVE ( 'NONE', #14221, #35825, #67143, .T. ) ; +#16296 = CARTESIAN_POINT ( 'NONE', ( 8.467563897311031000, 44.44999999999999600, -5.157337779574301200 ) ) ; +#16297 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 39.33333333333333600, 4.294441961970000500 ) ) ; +#16298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16300 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 80.69966441803890700, -28.70555803802997700 ) ) ; +#16301 = ORIENTED_EDGE ( 'NONE', *, *, #49016, .F. ) ; +#16302 = AXIS2_PLACEMENT_3D ( 'NONE', #51304, #14095, #57606 ) ; +#16303 = EDGE_CURVE ( 'NONE', #8014, #12788, #6223, .T. ) ; +#16304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16305 = EDGE_CURVE ( 'NONE', #18844, #52422, #72565, .T. ) ; +#16306 = EDGE_CURVE ( 'NONE', #45612, #46657, #58075, .T. ) ; +#16307 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16308 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500127700, 51.76337688193823500, -28.37223523914900300 ) ) ; +#16309 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145279100, 69.73198281203379200, -28.34169759783722100 ) ) ; +#16310 = FACE_OUTER_BOUND ( 'NONE', #64195, .T. ) ; +#16311 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16312 = CIRCLE ( 'NONE', #1640, 10.00000000000009200 ) ; +#16313 = ORIENTED_EDGE ( 'NONE', *, *, #38763, .T. ) ; +#16314 = AXIS2_PLACEMENT_3D ( 'NONE', #17517, #73270, #67274 ) ; +#16315 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#16316 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 30.85277818615432100, -28.70555803802999200 ) ) ; +#16317 = EDGE_LOOP ( 'NONE', ( #65724, #65818, #67752 ) ) ; +#16318 = ORIENTED_EDGE ( 'NONE', *, *, #3925, .F. ) ; +#16319 = CARTESIAN_POINT ( 'NONE', ( 9.769169305343021700, 60.94992009694571100, -28.43638873268707100 ) ) ; +#16320 = ORIENTED_EDGE ( 'NONE', *, *, #30577, .T. ) ; +#16321 = CARTESIAN_POINT ( 'NONE', ( 4.230811753656584400, 70.94994472024592400, -28.43636979168697800 ) ) ; +#16322 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#16323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16325 = AXIS2_PLACEMENT_3D ( 'NONE', #32805, #76324, #39039 ) ; +#16326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16327 = AXIS2_PLACEMENT_3D ( 'NONE', #20721, #1926, #64263 ) ; +#16328 = ORIENTED_EDGE ( 'NONE', *, *, #18193, .T. ) ; +#16329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19849, #57111, #26120, #69598 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387075261700E-007, 0.0007987676590766542900 ), + .UNSPECIFIED. ) ; +#16331 = ADVANCED_FACE ( 'NONE', ( #928 ), #32091, .T. ) ; +#16332 = CARTESIAN_POINT ( 'NONE', ( -16.45968132316369300, 56.42850366851877200, -28.60315268788645300 ) ) ; +#16333 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.30277574221156600, -28.32715733700494100 ) ) ; +#16334 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576917600, 35.04999999999999700, -28.65220501466659500 ) ) ; +#16335 = FACE_OUTER_BOUND ( 'NONE', #44453, .T. ) ; +#16336 = ORIENTED_EDGE ( 'NONE', *, *, #63622, .F. ) ; +#16337 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 42.83333333333334300, -9.205558038030003900 ) ) ; +#16338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16340 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37226, #56002, #74791, #37485 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646359600, 0.0009605145132142330300 ), + .UNSPECIFIED. ) ; +#16341 = EDGE_LOOP ( 'NONE', ( #51122, #1834, #8915, #341 ) ) ; +#16342 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803803001300 ) ) ; +#16343 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27075, #70565, #76819, #39555 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121408861400 ), + .UNSPECIFIED. ) ; +#16344 = FACE_OUTER_BOUND ( 'NONE', #77671, .T. ) ; +#16345 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#16346 = ADVANCED_FACE ( 'NONE', ( #65221 ), #51230, .T. ) ; +#16347 = AXIS2_PLACEMENT_3D ( 'NONE', #39372, #8092, #14650 ) ; +#16348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16349 = CARTESIAN_POINT ( 'NONE', ( -10.62858178328636800, 80.16749699759769500, -28.25056166218020700 ) ) ; +#16350 = CARTESIAN_POINT ( 'NONE', ( 1.501010053449676000, 57.14999999999997000, 6.983532621926338300 ) ) ; +#16351 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16352 = ORIENTED_EDGE ( 'NONE', *, *, #2627, .T. ) ; +#16353 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45110, #1354, #20422, #63958 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775793329100, 0.0009605145132142009400 ), + .UNSPECIFIED. ) ; +#16354 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#16355 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.16749699759768800, -28.20555803802992800 ) ) ; +#16356 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 56.16666666666667900, 0.9380355014189836200 ) ) ; +#16357 = FACE_OUTER_BOUND ( 'NONE', #26155, .T. ) ; +#16358 = ORIENTED_EDGE ( 'NONE', *, *, #37371, .T. ) ; +#16359 = ADVANCED_FACE ( 'NONE', ( #48602 ), #70035, .T. ) ; +#16360 = EDGE_CURVE ( 'NONE', #11721, #15321, #43587, .T. ) ; +#16361 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 70.34267608797600200, -28.20555803802997700 ) ) ; +#16362 = AXIS2_PLACEMENT_3D ( 'NONE', #74702, #37396, #156 ) ; +#16363 = VERTEX_POINT ( 'NONE', #20275 ) ; +#16364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16365 = ORIENTED_EDGE ( 'NONE', *, *, #71808, .F. ) ; +#16366 = ADVANCED_FACE ( 'NONE', ( #79792 ), #13619, .T. ) ; +#16367 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16368 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#16369 = CIRCLE ( 'NONE', #79528, 10.00000000000009200 ) ; +#16370 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16371 = ADVANCED_FACE ( 'NONE', ( #15555 ), #61316, .T. ) ; +#16372 = AXIS2_PLACEMENT_3D ( 'NONE', #25887, #69379, #32126 ) ; +#16373 = CIRCLE ( 'NONE', #11439, 10.00000000000009200 ) ; +#16374 = VERTEX_POINT ( 'NONE', #39287 ) ; +#16375 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819353600, 69.94924284854693000, -28.20555803802997700 ) ) ; +#16376 = ORIENTED_EDGE ( 'NONE', *, *, #80756, .T. ) ; +#16377 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 11.33333333333334600, -5.535685056952199400 ) ) ; +#16378 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484531700, 51.37838321498795600, -28.29547179040454100 ) ) ; +#16379 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10575, #4312, #41572, #54075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459159343054100E-007, 0.0007679767755145123800 ), + .UNSPECIFIED. ) ; +#16380 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16381 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#16382 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 51.49999999999998600, -7.061964498581016200 ) ) ; +#16383 = CONICAL_SURFACE ( 'NONE', #2435, 10.50000000000009600, 0.7853981633974500600 ) ; +#16384 = CONICAL_SURFACE ( 'NONE', #32866, 10.00000000000009600, 0.7853981633974447300 ) ; +#16385 = EDGE_LOOP ( 'NONE', ( #12434, #66763, #69149, #44015, #24046 ) ) ; +#16386 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999932500, 20.96823913367206400, -28.70555803802995200 ) ) ; +#16387 = ORIENTED_EDGE ( 'NONE', *, *, #67402, .T. ) ; +#16388 = EDGE_CURVE ( 'NONE', #72435, #44515, #77826, .T. ) ; +#16389 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ; +#16390 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#16391 = VERTEX_POINT ( 'NONE', #45511 ) ; +#16392 = EDGE_LOOP ( 'NONE', ( #62116, #45838, #52947, #14753 ) ) ; +#16393 = EDGE_LOOP ( 'NONE', ( #4347, #73393, #45598 ) ) ; +#16394 = ORIENTED_EDGE ( 'NONE', *, *, #24030, .T. ) ; +#16395 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16396 = ORIENTED_EDGE ( 'NONE', *, *, #72083, .T. ) ; +#16397 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828104900, 71.13768531620324600, -28.37082013777818200 ) ) ; +#16398 = ORIENTED_EDGE ( 'NONE', *, *, #33347, .F. ) ; +#16399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16400 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 73.43454006867176500, -28.70555803802999500 ) ) ; +#16401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16402 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 15.22261628933270000, -28.70555803802992800 ) ) ; +#16403 = ORIENTED_EDGE ( 'NONE', *, *, #46261, .F. ) ; +#16404 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450100, 66.12096679557672000, -28.36604143581858800 ) ) ; +#16405 = CONICAL_SURFACE ( 'NONE', #4233, 10.00000000000009400, 0.7853981633974447300 ) ; +#16406 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16407 = EDGE_CURVE ( 'NONE', #44057, #61282, #71034, .T. ) ; +#16409 = EDGE_CURVE ( 'NONE', #66426, #10748, #29209, .T. ) ; +#16408 = EDGE_LOOP ( 'NONE', ( #75745, #57579, #50032, #11885 ) ) ; +#16410 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428612000, 20.52858243452102700, -28.70555803802995200 ) ) ; +#16411 = ORIENTED_EDGE ( 'NONE', *, *, #21494, .F. ) ; +#16412 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16414 = FACE_OUTER_BOUND ( 'NONE', #54012, .T. ) ; +#16415 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576700, 20.67701665379184900, -28.20555803802994200 ) ) ; +#16416 = CARTESIAN_POINT ( 'NONE', ( -15.27292969368531300, 75.79999999999999700, -28.53959444491375700 ) ) ; +#16417 = AXIS2_PLACEMENT_3D ( 'NONE', #30189, #61175, #79930 ) ; +#16418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16419 = ORIENTED_EDGE ( 'NONE', *, *, #27636, .F. ) ; +#16420 = EDGE_CURVE ( 'NONE', #24749, #70673, #36006, .T. ) ; +#16421 = EDGE_CURVE ( 'NONE', #55249, #50287, #14700, .T. ) ; +#16422 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16423 = EDGE_CURVE ( 'NONE', #51967, #4048, #46652, .T. ) ; +#16424 = ORIENTED_EDGE ( 'NONE', *, *, #80383, .T. ) ; +#16425 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390786400, 25.18533208989794400, -28.53910738522637300 ) ) ; +#16426 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 46.72261628933269900, -28.70555803802996700 ) ) ; +#16427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16428 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16429 = AXIS2_PLACEMENT_3D ( 'NONE', #76244, #7962, #32724 ) ; +#16430 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16431 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.23237991241948900, -28.26633708900883900 ) ) ; +#16432 = CONICAL_SURFACE ( 'NONE', #60929, 10.00000000000009200, 0.7853981633974447300 ) ; +#16433 = ORIENTED_EDGE ( 'NONE', *, *, #23541, .T. ) ; +#16434 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#16435 = ORIENTED_EDGE ( 'NONE', *, *, #76914, .F. ) ; +#16436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16437 = AXIS2_PLACEMENT_3D ( 'NONE', #29728, #35943, #66965 ) ; +#16438 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#16439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16440 = AXIS2_PLACEMENT_3D ( 'NONE', #40537, #21799, #53038 ) ; +#16441 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999706900, 83.65857157145697400, -28.20555803803030800 ) ) ; +#16442 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13995, #1717, #20512, #64051 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659420200, 0.0005685240369923815400 ), + .UNSPECIFIED. ) ; +#16443 = CONICAL_SURFACE ( 'NONE', #80172, 10.00000000000009200, 0.7853981633974447300 ) ; +#16444 = CONICAL_SURFACE ( 'NONE', #41100, 10.00000000000009400, 0.7853981633974447300 ) ; +#16445 = VERTEX_POINT ( 'NONE', #46066 ) ; +#16446 = ORIENTED_EDGE ( 'NONE', *, *, #15983, .T. ) ; +#16447 = ADVANCED_FACE ( 'NONE', ( #63255 ), #52309, .T. ) ; +#16448 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 57.50000000000000700, -7.061964498581022400 ) ) ; +#16449 = AXIS2_PLACEMENT_3D ( 'NONE', #56998, #75732, #38454 ) ; +#16450 = EDGE_CURVE ( 'NONE', #41849, #65963, #28233, .T. ) ; +#16451 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2934, #77473, #46425, #9174 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278954391500, 0.001517194977238144300 ), + .UNSPECIFIED. ) ; +#16452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16453 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 41.46868088498121800, -28.51286550264512700 ) ) ; +#16454 = ADVANCED_FACE ( 'NONE', ( #30181 ), #9690, .F. ) ; +#16455 = FACE_OUTER_BOUND ( 'NONE', #38973, .T. ) ; +#16456 = ORIENTED_EDGE ( 'NONE', *, *, #13546, .T. ) ; +#16457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16458 = FACE_OUTER_BOUND ( 'NONE', #74224, .T. ) ; +#16459 = EDGE_LOOP ( 'NONE', ( #27540, #7467, #67305, #2159, #77795 ) ) ; +#16460 = ORIENTED_EDGE ( 'NONE', *, *, #48764, .T. ) ; +#16461 = ORIENTED_EDGE ( 'NONE', *, *, #52459, .F. ) ; +#16462 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#16463 = EDGE_CURVE ( 'NONE', #10841, #11625, #42770, .T. ) ; +#16464 = CONICAL_SURFACE ( 'NONE', #67898, 10.50000000000009600, 0.7853981633974518300 ) ; +#16465 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999990700, 51.66666666666668600, 5.722645192245508400 ) ) ; +#16466 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2803, #9048, #65140, #27883 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999276476800E-007, 0.0006654947828621399000 ), + .UNSPECIFIED. ) ; +#16467 = VERTEX_POINT ( 'NONE', #65158 ) ; +#16468 = ORIENTED_EDGE ( 'NONE', *, *, #9540, .T. ) ; +#16469 = AXIS2_PLACEMENT_3D ( 'NONE', #13698, #50883, #57186 ) ; +#16470 = VERTEX_POINT ( 'NONE', #71384 ) ; +#16471 = ORIENTED_EDGE ( 'NONE', *, *, #22464, .F. ) ; +#16472 = ORIENTED_EDGE ( 'NONE', *, *, #17540, .F. ) ; +#16473 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.89610994602603000, -28.37519436813183700 ) ) ; +#16474 = ORIENTED_EDGE ( 'NONE', *, *, #34284, .T. ) ; +#16475 = ORIENTED_EDGE ( 'NONE', *, *, #27263, .F. ) ; +#16476 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#16477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65035, #52187, #8944, #27771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249095000, 0.0008027336008645226600 ), + .UNSPECIFIED. ) ; +#16478 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427200, 36.92318720225498700, -28.70555803802995200 ) ) ; +#16479 = ADVANCED_FACE ( 'NONE', ( #44674 ), #40826, .F. ) ; +#16480 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555799700, 71.87833896172641300, -28.53892303408238700 ) ) ; +#16481 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 28.83333333333335000, 9.794441961969999600 ) ) ; +#16482 = CARTESIAN_POINT ( 'NONE', ( 4.230830694656883200, 70.65007990305414900, -28.43638873268729100 ) ) ; +#16483 = CIRCLE ( 'NONE', #530, 9.500000000000101300 ) ; +#16484 = AXIS2_PLACEMENT_3D ( 'NONE', #72706, #35454, #78967 ) ; +#16485 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571894200, 80.07141756547886800, -28.70555803803014400 ) ) ; +#16486 = ORIENTED_EDGE ( 'NONE', *, *, #51316, .F. ) ; +#16487 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819371400, 79.94924284854695900, -28.20555803802997700 ) ) ; +#16488 = EDGE_LOOP ( 'NONE', ( #41825, #42427, #45140 ) ) ; +#16489 = ORIENTED_EDGE ( 'NONE', *, *, #76661, .F. ) ; +#16490 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#16491 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16493 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16494 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16495 = FACE_OUTER_BOUND ( 'NONE', #31514, .T. ) ; +#16496 = AXIS2_PLACEMENT_3D ( 'NONE', #77323, #21317, #40054 ) ; +#16497 = ORIENTED_EDGE ( 'NONE', *, *, #52061, .F. ) ; +#16498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16499 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16500 = EDGE_CURVE ( 'NONE', #56798, #52008, #73944, .T. ) ; +#16501 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 63.33333333333333600, -5.535685056952199400 ) ) ; +#16502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16503 = CONICAL_SURFACE ( 'NONE', #73917, 10.00000000000009400, 0.7853981633974447300 ) ; +#16504 = ORIENTED_EDGE ( 'NONE', *, *, #62738, .T. ) ; +#16505 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528177500, 49.63131911501876200, -28.51286550264510900 ) ) ; +#16506 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849322800, 39.27966528189953300, -28.30868034705250100 ) ) ; +#16507 = ORIENTED_EDGE ( 'NONE', *, *, #35404, .F. ) ; +#16508 = ORIENTED_EDGE ( 'NONE', *, *, #41828, .T. ) ; +#16509 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263282900, 14.05000000000000600, -28.70555803802992800 ) ) ; +#16510 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#16511 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16512 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124969300, 86.46717019299475700, -28.53914313452760300 ) ) ; +#16513 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#16514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16515 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.43250300240229200, -28.20555803802997700 ) ) ; +#16516 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79047, #35533, #47981, #10765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203482130089200E-007, 0.0008990233139259319000 ), + .UNSPECIFIED. ) ; +#16517 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16519 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.65857157145700300, -28.20555803802997700 ) ) ; +#16520 = CARTESIAN_POINT ( 'NONE', ( 11.23081175365636000, 60.94994472024607300, -28.43636979168691400 ) ) ; +#16521 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300912900, 63.19621076493005100, -28.61864990621748800 ) ) ; +#16522 = EDGE_CURVE ( 'NONE', #42164, #5650, #59335, .T. ) ; +#16523 = CIRCLE ( 'NONE', #45695, 10.00000000000009200 ) ; +#16524 = CIRCLE ( 'NONE', #54084, 9.500000000000099500 ) ; +#16525 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540547700, 89.08026449164310600, -28.70555803803014100 ) ) ; +#16526 = ORIENTED_EDGE ( 'NONE', *, *, #17944, .F. ) ; +#16527 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 51.08083798124329200, -28.45106778992438000 ) ) ; +#16528 = CARTESIAN_POINT ( 'NONE', ( -1.783306465195870500, 80.79999999999999700, -28.32841359973439300 ) ) ; +#16529 = AXIS2_PLACEMENT_3D ( 'NONE', #34175, #46913, #59475 ) ; +#16530 = ORIENTED_EDGE ( 'NONE', *, *, #60856, .T. ) ; +#16531 = EDGE_CURVE ( 'NONE', #53826, #64564, #232, .T. ) ; +#16532 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16533 = EDGE_CURVE ( 'NONE', #2740, #34438, #66561, .T. ) ; +#16534 = CARTESIAN_POINT ( 'NONE', ( -15.11625473641673900, 14.04999999999997600, -28.53994725305373900 ) ) ; +#16535 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16536 = ADVANCED_FACE ( 'NONE', ( #26269 ), #55413, .T. ) ; +#16537 = FACE_OUTER_BOUND ( 'NONE', #77884, .T. ) ; +#16539 = ORIENTED_EDGE ( 'NONE', *, *, #34641, .T. ) ; +#16538 = EDGE_CURVE ( 'NONE', #58523, #19103, #71998, .T. ) ; +#16540 = CONICAL_SURFACE ( 'NONE', #25509, 10.00000000000009600, 0.7853981633974447300 ) ; +#16541 = ORIENTED_EDGE ( 'NONE', *, *, #13689, .T. ) ; +#16542 = AXIS2_PLACEMENT_3D ( 'NONE', #9495, #59276, #46739 ) ; +#16543 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719598000, 47.44142842854296300, -28.37229765499278500 ) ) ; +#16544 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 0.5000000000000086600, 6.847000845227641200 ) ) ; +#16545 = CIRCLE ( 'NONE', #12618, 10.00000000000009200 ) ; +#16546 = ORIENTED_EDGE ( 'NONE', *, *, #41993, .T. ) ; +#16547 = ORIENTED_EDGE ( 'NONE', *, *, #59900, .F. ) ; +#16548 = EDGE_LOOP ( 'NONE', ( #66728, #65110, #57571, #63603 ) ) ; +#16549 = ORIENTED_EDGE ( 'NONE', *, *, #80758, .F. ) ; +#16551 = ORIENTED_EDGE ( 'NONE', *, *, #61926, .T. ) ; +#16550 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877870600, 39.57332680091207100, -28.37233769390155300 ) ) ; +#16552 = ORIENTED_EDGE ( 'NONE', *, *, #39913, .F. ) ; +#16553 = ADVANCED_FACE ( 'NONE', ( #7712 ), #5797, .F. ) ; +#16554 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 34.83333333333333600, -2.545304000185615800 ) ) ; +#16555 = AXIS2_PLACEMENT_3D ( 'NONE', #71804, #15767, #34548 ) ; +#16556 = ORIENTED_EDGE ( 'NONE', *, *, #26093, .F. ) ; +#16558 = CARTESIAN_POINT ( 'NONE', ( 2.487410011450758200, 60.12140959735997100, -28.55996453402221000 ) ) ; +#16557 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63420, #1357, #20160, #63687 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354296478000E-007, 0.0004318366892330651600 ), + .UNSPECIFIED. ) ; +#16559 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16560 = EDGE_CURVE ( 'NONE', #43258, #77640, #52051, .T. ) ; +#16561 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, -0.1666666666666480100, -3.349151577478984600 ) ) ; +#16562 = AXIS2_PLACEMENT_3D ( 'NONE', #9171, #15469, #33689 ) ; +#16563 = ORIENTED_EDGE ( 'NONE', *, *, #36523, .F. ) ; +#16564 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528039525200, 83.65857157145681800, -28.37229765499288100 ) ) ; +#16565 = VECTOR ( 'NONE', #40214, 1000.000000000000000 ) ; +#16566 = ORIENTED_EDGE ( 'NONE', *, *, #50205, .F. ) ; +#16567 = CARTESIAN_POINT ( 'NONE', ( 2.522835655889128900, 44.45000000000001700, -10.37097357795263800 ) ) ; +#16568 = ORIENTED_EDGE ( 'NONE', *, *, #72087, .F. ) ; +#16569 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#16570 = VERTEX_POINT ( 'NONE', #59698 ) ; +#16571 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 37.16666666666669300, -4.152999154772358800 ) ) ; +#16572 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73268, #29779, #11258, #54741 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278958408400, 0.001249956855167845200 ), + .UNSPECIFIED. ) ; +#16573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16574 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16575 = CIRCLE ( 'NONE', #54584, 10.00000000000009200 ) ; +#16576 = EDGE_CURVE ( 'NONE', #75399, #58539, #37600, .T. ) ; +#16577 = AXIS2_PLACEMENT_3D ( 'NONE', #49351, #12142, #55634 ) ; +#16578 = ORIENTED_EDGE ( 'NONE', *, *, #73844, .F. ) ; +#16579 = AXIS2_PLACEMENT_3D ( 'NONE', #45356, #8107, #51610 ) ; +#16580 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703000, 46.48096581827313400, -28.69431509262337300 ) ) ; +#16582 = VERTEX_POINT ( 'NONE', #78738 ) ; +#16581 = CARTESIAN_POINT ( 'NONE', ( 4.512589988548844700, 80.12140959736002800, -28.55996453402207500 ) ) ; +#16583 = ADVANCED_FACE ( 'NONE', ( #38844 ), #53479, .T. ) ; +#16584 = CARTESIAN_POINT ( 'NONE', ( 2.438174915909147300, 9.983857102125123000, -28.57719681746174300 ) ) ; +#16585 = CARTESIAN_POINT ( 'NONE', ( 2.438065798940499000, 39.11613388835919400, -28.57723500840078000 ) ) ; +#16586 = CARTESIAN_POINT ( 'NONE', ( 10.62858178328675700, 80.16749699759753900, -28.25056166218050900 ) ) ; +#16587 = CIRCLE ( 'NONE', #31142, 10.00000000000009600 ) ; +#16588 = ORIENTED_EDGE ( 'NONE', *, *, #15327, .F. ) ; +#16589 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#16590 = VERTEX_POINT ( 'NONE', #53952 ) ; +#16591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16592 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16593 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195350000, 20.91634594406196600, -28.35038903107271200 ) ) ; +#16594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16595 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146668300, 38.80869142985028500, -28.37223374938522400 ) ) ; +#16596 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16597 = AXIS2_PLACEMENT_3D ( 'NONE', #69556, #1280, #26071 ) ; +#16598 = CIRCLE ( 'NONE', #54188, 10.00000000000009200 ) ; +#16599 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 40.66666666666667900, 5.722645192245505700 ) ) ; +#16600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16601 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 45.55000000000000400, -28.20555803802996700 ) ) ; +#16602 = ORIENTED_EDGE ( 'NONE', *, *, #19174, .F. ) ; +#16603 = ORIENTED_EDGE ( 'NONE', *, *, #7550, .T. ) ; +#16604 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#16605 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356100, 70.79999999999968500, -28.55171188418412200 ) ) ; +#16606 = AXIS2_PLACEMENT_3D ( 'NONE', #16849, #41584, #10593 ) ; +#16607 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003200, 80.24722181384549900, -28.70555803803016200 ) ) ; +#16608 = CARTESIAN_POINT ( 'NONE', ( -4.145227740322244600, 57.15000000000002000, 6.869401993033212000 ) ) ; +#16609 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23739, #35963, #73497, #36233 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527041627800E-007, 0.0007303749718167598700 ), + .UNSPECIFIED. ) ; +#16610 = EDGE_CURVE ( 'NONE', #51055, #50273, #70001, .T. ) ; +#16611 = FACE_OUTER_BOUND ( 'NONE', #1851, .T. ) ; +#16612 = ORIENTED_EDGE ( 'NONE', *, *, #51407, .T. ) ; +#16613 = ORIENTED_EDGE ( 'NONE', *, *, #40878, .T. ) ; +#16614 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853718400, 60.34267608797617300, -28.20555803803014400 ) ) ; +#16615 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#16616 = ORIENTED_EDGE ( 'NONE', *, *, #22481, .F. ) ; +#16617 = CIRCLE ( 'NONE', #4728, 10.00000000000009400 ) ; +#16618 = CARTESIAN_POINT ( 'NONE', ( -2.530136888809774400, 9.146957350529797600, -28.66910751791843700 ) ) ; +#16619 = ORIENTED_EDGE ( 'NONE', *, *, #76665, .T. ) ; +#16620 = CARTESIAN_POINT ( 'NONE', ( -19.83337731557493200, 7.583483701434476000, -27.46075395635616100 ) ) ; +#16621 = ORIENTED_EDGE ( 'NONE', *, *, #36186, .T. ) ; +#16622 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ; +#16623 = ORIENTED_EDGE ( 'NONE', *, *, #54233, .T. ) ; +#16624 = EDGE_LOOP ( 'NONE', ( #14891, #3013, #17587 ) ) ; +#16625 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 19.89456479767167400, -28.70555803802994200 ) ) ; +#16626 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492448200, 29.20543520232829600, -28.70555803802994200 ) ) ; +#16627 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#16628 = ADVANCED_FACE ( 'NONE', ( #75866 ), #3827, .F. ) ; +#16629 = FACE_OUTER_BOUND ( 'NONE', #37425, .T. ) ; +#16631 = EDGE_CURVE ( 'NONE', #55704, #59548, #20390, .T. ) ; +#16630 = VERTEX_POINT ( 'NONE', #41696 ) ; +#16632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16633 = VERTEX_POINT ( 'NONE', #54218 ) ; +#16634 = ORIENTED_EDGE ( 'NONE', *, *, #73471, .T. ) ; +#16635 = EDGE_CURVE ( 'NONE', #76219, #31985, #23181, .T. ) ; +#16636 = EDGE_LOOP ( 'NONE', ( #1830, #32097, #28767, #75543, #14215, #23651, #16134, #42124 ) ) ; +#16637 = EDGE_LOOP ( 'NONE', ( #76836, #74834, #78916, #7504 ) ) ; +#16638 = ORIENTED_EDGE ( 'NONE', *, *, #50663, .T. ) ; +#16639 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38892, #63705, #26451, #1646 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002680960718950713900, 0.0006654852833084183400 ), + .UNSPECIFIED. ) ; +#16640 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#16641 = FACE_OUTER_BOUND ( 'NONE', #18047, .T. ) ; +#16642 = ADVANCED_FACE ( 'NONE', ( #11662 ), #35002, .T. ) ; +#16643 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 9.166666666666664300, 3.794441961969996900 ) ) ; +#16644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36989, #49472, #12275, #55752 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002757230174905136700 ), + .UNSPECIFIED. ) ; +#16645 = VERTEX_POINT ( 'NONE', #10991 ) ; +#16646 = EDGE_CURVE ( 'NONE', #29577, #73683, #24302, .T. ) ; +#16647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16648 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 49.33333333333335000, 5.722645192245503900 ) ) ; +#16649 = EDGE_CURVE ( 'NONE', #576, #35510, #22340, .T. ) ; +#16650 = AXIS2_PLACEMENT_3D ( 'NONE', #38720, #57528, #51219 ) ; +#16651 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#16652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16653 = CIRCLE ( 'NONE', #2385, 10.00000000000009400 ) ; +#16655 = ORIENTED_EDGE ( 'NONE', *, *, #16072, .T. ) ; +#16654 = ADVANCED_FACE ( 'NONE', ( #36913 ), #33024, .T. ) ; +#16656 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76709, #26969, #58211, #20980 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002240675813180275600, 0.0006556005030039087100 ), + .UNSPECIFIED. ) ; +#16657 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#16658 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.65857157145701000, -28.20555803802995200 ) ) ; +#16659 = AXIS2_PLACEMENT_3D ( 'NONE', #67493, #30270, #73771 ) ; +#16660 = EDGE_CURVE ( 'NONE', #23991, #60859, #8683, .T. ) ; +#16661 = CARTESIAN_POINT ( 'NONE', ( 12.06092805703280400, 10.00000000000006800, -28.70555803802998100 ) ) ; +#16662 = EDGE_CURVE ( 'NONE', #41614, #7744, #75039, .T. ) ; +#16663 = EDGE_CURVE ( 'NONE', #63749, #47050, #60592, .T. ) ; +#16664 = ADVANCED_FACE ( 'NONE', ( #49531 ), #80716, .F. ) ; +#16665 = AXIS2_PLACEMENT_3D ( 'NONE', #54789, #79562, #17549 ) ; +#16666 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000024900, 80.90050506338805300, -28.70555803803014400 ) ) ; +#16667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16668 = AXIS2_PLACEMENT_3D ( 'NONE', #940, #44418, #7184 ) ; +#16669 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 32.93454006867177200, -28.70555803802998800 ) ) ; +#16670 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16671 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#16672 = ORIENTED_EDGE ( 'NONE', *, *, #11152, .F. ) ; +#16673 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.62753447840926700, -28.38801640354892800 ) ) ; +#16674 = VERTEX_POINT ( 'NONE', #73811 ) ; +#16675 = AXIS2_PLACEMENT_3D ( 'NONE', #21885, #15631, #59126 ) ; +#16676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16677 = VERTEX_POINT ( 'NONE', #36521 ) ; +#16678 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846336700, 70.79999999999991200, -28.55171188418384500 ) ) ; +#16679 = EDGE_CURVE ( 'NONE', #10610, #40802, #46073, .T. ) ; +#16680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16681 = CARTESIAN_POINT ( 'NONE', ( -15.27292969368531000, 85.79999999999998300, -28.53959444491376000 ) ) ; +#16682 = AXIS2_PLACEMENT_3D ( 'NONE', #3672, #40949, #77944 ) ; +#16683 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16684 = AXIS2_PLACEMENT_3D ( 'NONE', #4659, #48148, #10936 ) ; +#16685 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528430600, 39.13131911501858400, -28.51286550264481800 ) ) ; +#16686 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#16687 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274714700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#16688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4671, #35954, #54710, #17463 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351216500500E-007, 0.0003902800319293305600 ), + .UNSPECIFIED. ) ; +#16689 = FACE_OUTER_BOUND ( 'NONE', #65888, .T. ) ; +#16690 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.41070809551055000, -28.20555803802994200 ) ) ; +#16691 = VERTEX_POINT ( 'NONE', #55283 ) ; +#16692 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000700, 40.34772751981643800, -28.70555803802999500 ) ) ; +#16693 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 31.18929190448939400, -28.20555803802996700 ) ) ; +#16694 = ORIENTED_EDGE ( 'NONE', *, *, #70687, .F. ) ; +#16695 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16697 = CONICAL_SURFACE ( 'NONE', #52615, 10.00000000000009400, 0.7853981633974447300 ) ; +#16698 = ORIENTED_EDGE ( 'NONE', *, *, #55817, .F. ) ; +#16700 = EDGE_LOOP ( 'NONE', ( #38134, #80691, #21677, #49583 ) ) ; +#16699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16701 = ORIENTED_EDGE ( 'NONE', *, *, #10583, .F. ) ; +#16702 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16703 = ORIENTED_EDGE ( 'NONE', *, *, #76150, .T. ) ; +#16704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16705 = FACE_OUTER_BOUND ( 'NONE', #74019, .T. ) ; +#16706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16707 = AXIS2_PLACEMENT_3D ( 'NONE', #11939, #55430, #49155 ) ; +#16708 = ORIENTED_EDGE ( 'NONE', *, *, #40315, .F. ) ; +#16709 = CIRCLE ( 'NONE', #22844, 10.50000000000009800 ) ; +#16710 = ORIENTED_EDGE ( 'NONE', *, *, #22252, .T. ) ; +#16711 = ORIENTED_EDGE ( 'NONE', *, *, #50584, .T. ) ; +#16712 = ORIENTED_EDGE ( 'NONE', *, *, #44817, .T. ) ; +#16713 = ORIENTED_EDGE ( 'NONE', *, *, #57161, .T. ) ; +#16714 = ORIENTED_EDGE ( 'NONE', *, *, #66073, .F. ) ; +#16715 = CONICAL_SURFACE ( 'NONE', #55531, 10.00000000000009200, 0.7853981633974447300 ) ; +#16716 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 55.33333333333334300, 2.794441961969998300 ) ) ; +#16717 = AXIS2_PLACEMENT_3D ( 'NONE', #77688, #46655, #52367 ) ; +#16718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16719 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458388800, 20.01125751638925000, -28.53740755999538300 ) ) ; +#16720 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492639300, 17.57379779496234900, -28.70555803802992800 ) ) ; +#16721 = ADVANCED_FACE ( 'NONE', ( #57372 ), #47590, .T. ) ; +#16722 = EDGE_CURVE ( 'NONE', #78548, #69726, #31650, .T. ) ; +#16723 = FACE_OUTER_BOUND ( 'NONE', #4362, .T. ) ; +#16724 = ORIENTED_EDGE ( 'NONE', *, *, #44246, .F. ) ; +#16725 = ORIENTED_EDGE ( 'NONE', *, *, #8557, .T. ) ; +#16726 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48192, #4699, #41961, #10984 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354520673900E-007, 0.0007670609591622784300 ), + .UNSPECIFIED. ) ; +#16727 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#16728 = ADVANCED_FACE ( 'NONE', ( #16495 ), #14533, .T. ) ; +#16729 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444313100, 79.72166103827326800, -28.53892303408230500 ) ) ; +#16730 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#16731 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042469200, 48.50972971738995200, -28.70555803802996700 ) ) ; +#16732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16733 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 26.66666666666667500, -10.73183747965883100 ) ) ; +#16734 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16735 = EDGE_CURVE ( 'NONE', #25625, #12801, #66146, .T. ) ; +#16736 = ADVANCED_FACE ( 'NONE', ( #1857 ), #29187, .T. ) ; +#16737 = EDGE_CURVE ( 'NONE', #48083, #76058, #17193, .T. ) ; +#16738 = ORIENTED_EDGE ( 'NONE', *, *, #32395, .F. ) ; +#16739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16740 = CARTESIAN_POINT ( 'NONE', ( -10.46481234601704300, 9.406791769321968000, -28.68794773163825000 ) ) ; +#16741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16742 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972625800, 59.37488905616165600, -28.55192314908413200 ) ) ; +#16743 = ORIENTED_EDGE ( 'NONE', *, *, #73468, .T. ) ; +#16744 = ADVANCED_FACE ( 'NONE', ( #64200 ), #12338, .T. ) ; +#16745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16746 = EDGE_CURVE ( 'NONE', #73022, #10246, #51478, .T. ) ; +#16747 = ADVANCED_FACE ( 'NONE', ( #62233 ), #37304, .T. ) ; +#16748 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#16749 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385079500, 10.10677350908850900, -28.30799595738890100 ) ) ; +#16750 = EDGE_CURVE ( 'NONE', #36616, #32707, #31100, .T. ) ; +#16751 = CIRCLE ( 'NONE', #8984, 9.500000000000099500 ) ; +#16752 = EDGE_LOOP ( 'NONE', ( #57365, #1271, #78613, #20751 ) ) ; +#16753 = AXIS2_PLACEMENT_3D ( 'NONE', #52417, #15187, #58706 ) ; +#16754 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 91.59999999999999400, -28.70555803803001300 ) ) ; +#16755 = FACE_OUTER_BOUND ( 'NONE', #29587, .T. ) ; +#16756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16757 = EDGE_LOOP ( 'NONE', ( #28874, #47661, #6125, #2615 ) ) ; +#16758 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 61.16666666666668600, 3.794441961969996900 ) ) ; +#16759 = EDGE_CURVE ( 'NONE', #34956, #11943, #45621, .T. ) ; +#16760 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000053600, 8.673617379884035500E-016, -19.32050998661230800 ) ) ; +#16761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16762 = ORIENTED_EDGE ( 'NONE', *, *, #23691, .T. ) ; +#16763 = CIRCLE ( 'NONE', #57292, 9.500000000000099500 ) ; +#16764 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 17.19543746431604000, -28.61277292027076100 ) ) ; +#16765 = ORIENTED_EDGE ( 'NONE', *, *, #38886, .T. ) ; +#16766 = VERTEX_POINT ( 'NONE', #25098 ) ; +#16767 = ORIENTED_EDGE ( 'NONE', *, *, #77764, .F. ) ; +#16768 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16770 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 57.14999999999999900, -1.205558038030005700 ) ) ; +#16771 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#16772 = AXIS2_PLACEMENT_3D ( 'NONE', #79749, #42456, #5220 ) ; +#16773 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 52.97376207875059600, -28.70555803802997700 ) ) ; +#16774 = CIRCLE ( 'NONE', #23361, 9.500000000000097700 ) ; +#16775 = EDGE_CURVE ( 'NONE', #68070, #39513, #12592, .T. ) ; +#16776 = PLANE ( 'NONE', #76038 ) ; +#16777 = EDGE_CURVE ( 'NONE', #21820, #72280, #2694, .T. ) ; +#16778 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171143700, 19.29999999999999000, -28.57107744631859300 ) ) ; +#16779 = EDGE_CURVE ( 'NONE', #43592, #45054, #78789, .T. ) ; +#16780 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52308, #58607, #33859, #77375 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203483666106700E-007, 0.0008990233139251823900 ), + .UNSPECIFIED. ) ; +#16781 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281064800, 80.46231468379673400, -28.37082013777818900 ) ) ; +#16782 = ORIENTED_EDGE ( 'NONE', *, *, #30716, .F. ) ; +#16783 = CARTESIAN_POINT ( 'NONE', ( 10.53518765398347900, 9.406791769321794000, -28.68794773163823600 ) ) ; +#16784 = VERTEX_POINT ( 'NONE', #68624 ) ; +#16785 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#16786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16787 = CIRCLE ( 'NONE', #39996, 10.00000000000009200 ) ; +#16788 = AXIS2_PLACEMENT_3D ( 'NONE', #13605, #57099, #19839 ) ; +#16789 = CARTESIAN_POINT ( 'NONE', ( -16.93476732735786100, 37.45995918884886300, -28.51837550109417700 ) ) ; +#16790 = ORIENTED_EDGE ( 'NONE', *, *, #49861, .F. ) ; +#16791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1518, #38753, #14052, #57554 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459156291153100E-007, 0.0007679767755142079400 ), + .UNSPECIFIED. ) ; +#16792 = EDGE_LOOP ( 'NONE', ( #29099, #55822, #35824, #7002, #47034, #24246, #69897, #26311 ) ) ; +#16793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16794 = ORIENTED_EDGE ( 'NONE', *, *, #6049, .F. ) ; +#16795 = EDGE_LOOP ( 'NONE', ( #7306, #7248, #18010, #17699 ) ) ; +#16796 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16797 = FACE_OUTER_BOUND ( 'NONE', #70125, .T. ) ; +#16798 = ORIENTED_EDGE ( 'NONE', *, *, #11629, .F. ) ; +#16799 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31094, #37294, #31359, #74867 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662960200 ), + .UNSPECIFIED. ) ; +#16800 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#16801 = EDGE_CURVE ( 'NONE', #57390, #67833, #69039, .T. ) ; +#16802 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.15857157145700800, -28.20555803802994200 ) ) ; +#16803 = FACE_OUTER_BOUND ( 'NONE', #12720, .T. ) ; +#16804 = AXIS2_PLACEMENT_3D ( 'NONE', #68886, #37863, #40557 ) ; +#16805 = AXIS2_PLACEMENT_3D ( 'NONE', #6676, #50169, #12962 ) ; +#16806 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194906300, 66.76150692817331800, -28.68631150211663400 ) ) ; +#16807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16808 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819196400, 79.94924284854674600, -28.20555803802997700 ) ) ; +#16809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16811 = ORIENTED_EDGE ( 'NONE', *, *, #32953, .T. ) ; +#16810 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22766, #47756, #66549, #29341 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211424400, 0.001517199873936578400 ), + .UNSPECIFIED. ) ; +#16812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16814 = FACE_OUTER_BOUND ( 'NONE', #73653, .T. ) ; +#16815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16816 = ORIENTED_EDGE ( 'NONE', *, *, #43853, .F. ) ; +#16817 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 67.50000000000000000, -9.258116921287651700 ) ) ; +#16818 = CARTESIAN_POINT ( 'NONE', ( 8.783306465195764200, 80.79999999999984100, -28.32841359973452100 ) ) ; +#16819 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 32.66666666666667100, 1.294441961969997200 ) ) ; +#16820 = AXIS2_PLACEMENT_3D ( 'NONE', #74062, #24284, #30556 ) ; +#16821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16823 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972458800, 79.37488905616146400, -28.55192314908427400 ) ) ; +#16824 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, -2.333333333333325900, 2.794441961969992100 ) ) ; +#16825 = AXIS2_PLACEMENT_3D ( 'NONE', #42372, #5125, #48614 ) ; +#16826 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#16827 = CARTESIAN_POINT ( 'NONE', ( -6.800463098392056900, 44.44999999999998200, -7.683660265957398000 ) ) ; +#16828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16829 = EDGE_CURVE ( 'NONE', #13600, #3853, #54585, .T. ) ; +#16830 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 35.00000000000000700, -1.205558038030002800 ) ) ; +#16831 = ORIENTED_EDGE ( 'NONE', *, *, #38391, .T. ) ; +#16832 = AXIS2_PLACEMENT_3D ( 'NONE', #62659, #25415, #68898 ) ; +#16833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26043, #63312, #19779, #32275 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283327254400, 0.0007287255810275592400 ), + .UNSPECIFIED. ) ; +#16834 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548998800, 18.15930907398571700, -28.35186440610893000 ) ) ; +#16835 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 71.08083798124329200, -28.45106778992437700 ) ) ; +#16836 = ORIENTED_EDGE ( 'NONE', *, *, #23932, .F. ) ; +#16837 = AXIS2_PLACEMENT_3D ( 'NONE', #47577, #10362, #53868 ) ; +#16838 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58903, #15401, #52631, #21670 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397466800, 0.001517194977238196100 ), + .UNSPECIFIED. ) ; +#16839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16840 = EDGE_LOOP ( 'NONE', ( #17712, #5855, #15843, #47356 ) ) ; +#16841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16843 = CARTESIAN_POINT ( 'NONE', ( 24.55678263336297100, 5.221623009889713200, -21.65048603619079500 ) ) ; +#16844 = CIRCLE ( 'NONE', #36081, 10.00000000000009600 ) ; +#16845 = VERTEX_POINT ( 'NONE', #56915 ) ; +#16846 = CONICAL_SURFACE ( 'NONE', #2353, 10.50000000000009600, 0.7853981633974518300 ) ; +#16847 = AXIS2_PLACEMENT_3D ( 'NONE', #45274, #57838, #76588 ) ; +#16848 = VERTEX_POINT ( 'NONE', #63183 ) ; +#16849 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#16850 = FACE_OUTER_BOUND ( 'NONE', #59217, .T. ) ; +#16851 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16853 = ORIENTED_EDGE ( 'NONE', *, *, #75964, .T. ) ; +#16854 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 101.5999999999999900, -19.22205745425366200 ) ) ; +#16855 = EDGE_LOOP ( 'NONE', ( #26264, #12086, #38026, #52555, #56624 ) ) ; +#16856 = ADVANCED_FACE ( 'NONE', ( #60292 ), #41747, .F. ) ; +#16857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16859 = FACE_OUTER_BOUND ( 'NONE', #37400, .T. ) ; +#16860 = ADVANCED_FACE ( 'NONE', ( #76803 ), #75657, .T. ) ; +#16861 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16862 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707825200, 81.66410593583275100, -28.68054222049971700 ) ) ; +#16863 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 54.37738371066728900, -28.70555803802997700 ) ) ; +#16864 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703400, 35.98096581827316200, -28.69431509262337300 ) ) ; +#16865 = EDGE_LOOP ( 'NONE', ( #51432, #44465, #66644, #54870 ) ) ; +#16866 = CONICAL_SURFACE ( 'NONE', #79566, 10.00000000000009200, 0.7853981633974447300 ) ; +#16867 = EDGE_CURVE ( 'NONE', #69438, #45092, #74873, .T. ) ; +#16868 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 38.49999999999996400, -7.061964498581022400 ) ) ; +#16869 = VERTEX_POINT ( 'NONE', #57180 ) ; +#16870 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#16871 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16873 = EDGE_CURVE ( 'NONE', #21268, #39968, #40108, .T. ) ; +#16872 = VERTEX_POINT ( 'NONE', #7376 ) ; +#16874 = ORIENTED_EDGE ( 'NONE', *, *, #24587, .F. ) ; +#16875 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 79.60439022488284900, -28.70555803803047500 ) ) ; +#16876 = ORIENTED_EDGE ( 'NONE', *, *, #51387, .T. ) ; +#16877 = CIRCLE ( 'NONE', #39804, 10.50000000000009800 ) ; +#16878 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 21.59027028261003200, -28.70555803802994500 ) ) ; +#16879 = CARTESIAN_POINT ( 'NONE', ( -16.73584074219411700, 30.42563948201437500, -28.45080305020446300 ) ) ; +#16880 = ORIENTED_EDGE ( 'NONE', *, *, #47939, .T. ) ; +#16881 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654749800, 61.32559822014181300, -28.29986836858015300 ) ) ; +#16882 = CARTESIAN_POINT ( 'NONE', ( -8.789501743151296500, 57.15000000000003400, 2.111352450374429900 ) ) ; +#16883 = EDGE_CURVE ( 'NONE', #75931, #66852, #58311, .T. ) ; +#16884 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#16885 = ADVANCED_FACE ( 'NONE', ( #27192 ), #39808, .T. ) ; +#16886 = ORIENTED_EDGE ( 'NONE', *, *, #16662, .T. ) ; +#16887 = ORIENTED_EDGE ( 'NONE', *, *, #37679, .T. ) ; +#16888 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16889 = EDGE_CURVE ( 'NONE', #3605, #14966, #72928, .T. ) ; +#16890 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16891 = EDGE_CURVE ( 'NONE', #34824, #32145, #25679, .T. ) ; +#16892 = ORIENTED_EDGE ( 'NONE', *, *, #68582, .T. ) ; +#16893 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64426, #39633, #77166, #39906 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736016044600E-007, 0.0006649316450231919800 ), + .UNSPECIFIED. ) ; +#16894 = CONICAL_SURFACE ( 'NONE', #63865, 10.00000000000009200, 0.7853981633974447300 ) ; +#16895 = CARTESIAN_POINT ( 'NONE', ( -22.38195000315634400, 6.309188425181575100, -25.45287253345240300 ) ) ; +#16896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16897 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75, #74622, #49814, #12610 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881208147506800E-007, 0.0008724366121410546200 ), + .UNSPECIFIED. ) ; +#16898 = AXIS2_PLACEMENT_3D ( 'NONE', #65836, #28600, #72105 ) ; +#16899 = EDGE_CURVE ( 'NONE', #57238, #53919, #11211, .T. ) ; +#16900 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#16901 = EDGE_CURVE ( 'NONE', #26454, #55345, #77517, .T. ) ; +#16902 = EDGE_CURVE ( 'NONE', #24948, #68754, #43684, .T. ) ; +#16903 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46849, #22136, #16149, #59680 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925620251000E-007, 0.0004431156063177170100 ), + .UNSPECIFIED. ) ; +#16904 = AXIS2_PLACEMENT_3D ( 'NONE', #42079, #73120, #79375 ) ; +#16905 = FACE_OUTER_BOUND ( 'NONE', #76108, .T. ) ; +#16906 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 37.16545993132820800, -28.70555803802998100 ) ) ; +#16907 = EDGE_LOOP ( 'NONE', ( #65872, #19915, #15229, #47664 ) ) ; +#16908 = AXIS2_PLACEMENT_3D ( 'NONE', #72589, #35340, #78855 ) ; +#16909 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 7.000000000000008900, -6.205558038030003100 ) ) ; +#16910 = AXIS2_PLACEMENT_3D ( 'NONE', #55575, #18319, #61860 ) ; +#16911 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40207, #2950, #58980, #21744 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283327444600, 0.0007287255810278264900 ), + .UNSPECIFIED. ) ; +#16912 = AXIS2_PLACEMENT_3D ( 'NONE', #69495, #7479, #50969 ) ; +#16913 = ORIENTED_EDGE ( 'NONE', *, *, #31001, .F. ) ; +#16914 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 51.08083798124329200, -28.45106778992438000 ) ) ; +#16915 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856985400, 15.92318720225501300, -28.70555803802992800 ) ) ; +#16916 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 47.16666666666667900, -9.205558038030003900 ) ) ; +#16917 = CONICAL_SURFACE ( 'NONE', #15705, 10.50000000000009600, 0.7853981633974482800 ) ; +#16918 = ORIENTED_EDGE ( 'NONE', *, *, #43508, .F. ) ; +#16919 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16920 = CIRCLE ( 'NONE', #48695, 10.50000000000009600 ) ; +#16921 = ORIENTED_EDGE ( 'NONE', *, *, #64276, .F. ) ; +#16922 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#16923 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ; +#16924 = FACE_OUTER_BOUND ( 'NONE', #48119, .T. ) ; +#16925 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 71.43945992495532900, -28.34042301926881200 ) ) ; +#16926 = EDGE_LOOP ( 'NONE', ( #49600, #34908, #10428 ) ) ; +#16927 = ORIENTED_EDGE ( 'NONE', *, *, #33428, .F. ) ; +#16928 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732799800, 59.66414768974079400, -28.38420446581270100 ) ) ; +#16929 = VERTEX_POINT ( 'NONE', #26992 ) ; +#16930 = AXIS2_PLACEMENT_3D ( 'NONE', #47540, #72624, #66361 ) ; +#16931 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507486000, 42.02620220503758500, -28.70555803802999500 ) ) ; +#16932 = EDGE_CURVE ( 'NONE', #24651, #54070, #8650, .T. ) ; +#16933 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73717, #30227, #67458, #79973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210992800, 0.001517199873936581200 ), + .UNSPECIFIED. ) ; +#16934 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#16935 = ADVANCED_FACE ( 'NONE', ( #25231 ), #37846, .T. ) ; +#16936 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16937 = CIRCLE ( 'NONE', #64950, 9.500000000000099500 ) ; +#16938 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752679800, 52.08770193146158100, -28.47147304844881100 ) ) ; +#16939 = CARTESIAN_POINT ( 'NONE', ( 10.82858517434086200, 93.00673221364381500, -28.60974763495499200 ) ) ; +#16940 = EDGE_LOOP ( 'NONE', ( #39770, #11914, #8712 ) ) ; +#16941 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045800, 90.36203212531218300, -28.38801640354843400 ) ) ; +#16942 = FACE_OUTER_BOUND ( 'NONE', #52669, .T. ) ; +#16943 = ORIENTED_EDGE ( 'NONE', *, *, #18213, .T. ) ; +#16944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16945 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 47.42318720225497200, -28.70555803802996700 ) ) ; +#16946 = EDGE_CURVE ( 'NONE', #63160, #25229, #63069, .T. ) ; +#16947 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428612900, 31.02858243452103400, -28.70555803802996700 ) ) ; +#16948 = ORIENTED_EDGE ( 'NONE', *, *, #67532, .T. ) ; +#16949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16951 = AXIS2_PLACEMENT_3D ( 'NONE', #59204, #21957, #65503 ) ; +#16952 = ORIENTED_EDGE ( 'NONE', *, *, #2508, .F. ) ; +#16953 = CARTESIAN_POINT ( 'NONE', ( 16.87500833473021100, 61.58737389638835700, -28.29936525552475900 ) ) ; +#16954 = ORIENTED_EDGE ( 'NONE', *, *, #80590, .F. ) ; +#16955 = CARTESIAN_POINT ( 'NONE', ( 4.036255108181464400, 89.94924284854707300, -28.20555803803014100 ) ) ; +#16956 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16957 = ADVANCED_FACE ( 'NONE', ( #6717 ), #4759, .T. ) ; +#16958 = CIRCLE ( 'NONE', #73664, 10.00000000000009600 ) ; +#16959 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#16960 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#16961 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16962 = ORIENTED_EDGE ( 'NONE', *, *, #3663, .T. ) ; +#16963 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#16964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16965 = AXIS2_PLACEMENT_3D ( 'NONE', #15150, #58656, #21429 ) ; +#16966 = ORIENTED_EDGE ( 'NONE', *, *, #11009, .F. ) ; +#16967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16968 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462305600, 90.20590598242358700, -28.39369363572377100 ) ) ; +#16969 = ORIENTED_EDGE ( 'NONE', *, *, #53325, .F. ) ; +#16970 = CIRCLE ( 'NONE', #12760, 9.500000000000101300 ) ; +#16971 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999999600, 71.43250300240228500, -28.20555803802997700 ) ) ; +#16972 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#16973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16974 = AXIS2_PLACEMENT_3D ( 'NONE', #23892, #67389, #30170 ) ; +#16975 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72782, #29298, #41738, #4489 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377688426957000E-007, 0.0007331055842533677500 ), + .UNSPECIFIED. ) ; +#16976 = ADVANCED_FACE ( 'NONE', ( #70948 ), #52218, .T. ) ; +#16977 = EDGE_CURVE ( 'NONE', #52338, #6616, #23274, .T. ) ; +#16978 = CIRCLE ( 'NONE', #48143, 10.00000000000009200 ) ; +#16979 = EDGE_LOOP ( 'NONE', ( #80157, #35237, #6672 ) ) ; +#16980 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 53.16666666666667900, -3.349151577478988200 ) ) ; +#16981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16982 = ORIENTED_EDGE ( 'NONE', *, *, #62633, .T. ) ; +#16983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16986 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .F. ) ; +#16985 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819192900, 51.65075715145311400, -28.20555803802997700 ) ) ; +#16988 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13879, #19863, #63662, #26406 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318563414000, 0.001319946300100827200 ), + .UNSPECIFIED. ) ; +#16987 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198457800, 60.90033558196107300, -28.70555803802997700 ) ) ; +#16989 = ORIENTED_EDGE ( 'NONE', *, *, #28859, .T. ) ; +#16990 = CIRCLE ( 'NONE', #3320, 10.00000000000009200 ) ; +#16991 = EDGE_CURVE ( 'NONE', #32780, #70358, #21337, .T. ) ; +#16992 = EDGE_LOOP ( 'NONE', ( #60309, #11080, #80095, #39802 ) ) ; +#16993 = EDGE_CURVE ( 'NONE', #52802, #45054, #56348, .T. ) ; +#16994 = CARTESIAN_POINT ( 'NONE', ( 4.561825084090894000, 30.98385710212512500, -28.57719681746177900 ) ) ; +#16995 = CIRCLE ( 'NONE', #45867, 10.00000000000009400 ) ; +#16996 = CIRCLE ( 'NONE', #44965, 9.500000000000099500 ) ; +#16997 = ORIENTED_EDGE ( 'NONE', *, *, #4121, .T. ) ; +#16998 = EDGE_LOOP ( 'NONE', ( #76750, #58195, #14573, #24021 ) ) ; +#16999 = EDGE_LOOP ( 'NONE', ( #31151, #12584, #17265, #2630 ) ) ; +#17000 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #62608, #25355 ) ; +#17001 = EDGE_CURVE ( 'NONE', #23233, #65973, #48555, .T. ) ; +#17002 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37453, #62515, #31517, #75029 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736090394500E-007, 0.0006649316450232151900 ), + .UNSPECIFIED. ) ; +#17003 = EDGE_CURVE ( 'NONE', #13553, #45369, #69006, .T. ) ; +#17004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17006 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 87.94142842854287800, -28.20555803803047800 ) ) ; +#17007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17008 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 19.34772751981642400, -28.70555803802998400 ) ) ; +#17009 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 24.49999999999999600, 6.847000845227646500 ) ) ; +#17010 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701300, 38.19543746431600800, -28.61277292027075700 ) ) ; +#17011 = CONICAL_SURFACE ( 'NONE', #69553, 10.50000000000009600, 0.7853981633974518300 ) ; +#17012 = EDGE_CURVE ( 'NONE', #21010, #62756, #10644, .T. ) ; +#17013 = ORIENTED_EDGE ( 'NONE', *, *, #51869, .T. ) ; +#17014 = AXIS2_PLACEMENT_3D ( 'NONE', #62162, #37365, #116 ) ; +#17015 = CARTESIAN_POINT ( 'NONE', ( -4.035907765261399000, 18.00212297965146000, -28.25344967589763100 ) ) ; +#17016 = FACE_OUTER_BOUND ( 'NONE', #22551, .T. ) ; +#17017 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#17018 = ORIENTED_EDGE ( 'NONE', *, *, #41174, .T. ) ; +#17019 = ORIENTED_EDGE ( 'NONE', *, *, #29340, .T. ) ; +#17021 = ORIENTED_EDGE ( 'NONE', *, *, #29444, .F. ) ; +#17020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #811, #38075, #7066, #50568 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104962402400, 0.0007670610367943868500 ), + .UNSPECIFIED. ) ; +#17022 = ORIENTED_EDGE ( 'NONE', *, *, #20334, .F. ) ; +#17023 = ORIENTED_EDGE ( 'NONE', *, *, #54169, .F. ) ; +#17024 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17025 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146265600, 61.25732391202370800, -28.20555803803030800 ) ) ; +#17026 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17027 = EDGE_LOOP ( 'NONE', ( #16798, #16724, #9382 ) ) ; +#17028 = FACE_OUTER_BOUND ( 'NONE', #40080, .T. ) ; +#17029 = AXIS2_PLACEMENT_3D ( 'NONE', #14250, #57764, #20508 ) ; +#17030 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801593800, 70.90033558196090300, -28.70555803803014400 ) ) ; +#17031 = AXIS2_PLACEMENT_3D ( 'NONE', #4230, #47731, #10503 ) ; +#17032 = ORIENTED_EDGE ( 'NONE', *, *, #10556, .F. ) ; +#17033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71433, #65219, #9118, #9406 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417466013347000E-007, 0.0004435563144346472200 ), + .UNSPECIFIED. ) ; +#17034 = ADVANCED_FACE ( 'NONE', ( #35921 ), #33964, .T. ) ; +#17035 = CARTESIAN_POINT ( 'NONE', ( -4.035907765261583800, 49.50212297965121200, -28.25344967589750300 ) ) ; +#17036 = CARTESIAN_POINT ( 'NONE', ( -21.56266275772059500, 101.3605102140859500, -20.92757529631636300 ) ) ; +#17037 = VERTEX_POINT ( 'NONE', #15797 ) ; +#17038 = EDGE_LOOP ( 'NONE', ( #4603, #80217, #6525, #49050 ) ) ; +#17039 = CARTESIAN_POINT ( 'NONE', ( 17.07349184251525600, 60.22161678501181800, -28.29547179040448100 ) ) ; +#17040 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17041 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 59.00000000000000700, -6.205558038030003100 ) ) ; +#17042 = EDGE_LOOP ( 'NONE', ( #22687, #34965, #60941, #65372, #1687, #52094 ) ) ; +#17043 = CARTESIAN_POINT ( 'NONE', ( 23.43661076327849100, 1.563389236721089800, -24.36555300396201700 ) ) ; +#17044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#17045 = ORIENTED_EDGE ( 'NONE', *, *, #12552, .T. ) ; +#17046 = CIRCLE ( 'NONE', #77296, 9.500000000000099500 ) ; +#17047 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#17048 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198422200, 50.90033558196106600, -28.70555803802997700 ) ) ; +#17049 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17050 = ADVANCED_FACE ( 'NONE', ( #19365 ), #854, .T. ) ; +#17051 = CARTESIAN_POINT ( 'NONE', ( 17.07349692871609300, 81.37839075872547300, -28.29547734244375300 ) ) ; +#17052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17053 = EDGE_CURVE ( 'NONE', #30160, #57688, #17429, .T. ) ; +#17054 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17056 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17058 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17059 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489641100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#17060 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 43.99926474563212500, -28.70555803802997700 ) ) ; +#17061 = FACE_OUTER_BOUND ( 'NONE', #66417, .T. ) ; +#17062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17063 = ADVANCED_FACE ( 'NONE', ( #67061 ), #32014, .F. ) ; +#17064 = EDGE_CURVE ( 'NONE', #48907, #37576, #48518, .T. ) ; +#17065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17066 = AXIS2_PLACEMENT_3D ( 'NONE', #26912, #39102, #70398 ) ; +#17067 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17068 = EDGE_LOOP ( 'NONE', ( #9023, #8960, #41386, #76452, #64748, #26009, #74868 ) ) ; +#17069 = CONICAL_SURFACE ( 'NONE', #54116, 10.00000000000009200, 0.7853981633974447300 ) ; +#17070 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.87705528805138800, -28.20555803802996700 ) ) ; +#17071 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841388800, 20.43650294695131500, -28.30782889147480900 ) ) ; +#17073 = ORIENTED_EDGE ( 'NONE', *, *, #53308, .T. ) ; +#17072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17074 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17075 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59478, #59753, #78530, #41230 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799627994000E-007, 0.0005050252131284598500 ), + .UNSPECIFIED. ) ; +#17076 = ADVANCED_FACE ( 'NONE', ( #54406 ), #63177, .F. ) ; +#17077 = CONICAL_SURFACE ( 'NONE', #29213, 10.00000000000009600, 0.7853981633974447300 ) ; +#17078 = AXIS2_PLACEMENT_3D ( 'NONE', #2799, #9046, #15070 ) ; +#17079 = CIRCLE ( 'NONE', #80439, 9.500000000000099500 ) ; +#17080 = VERTEX_POINT ( 'NONE', #47303 ) ; +#17081 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17082 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 51.43250300240229900, -28.20555803802997700 ) ) ; +#17083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17084 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 65.33333333333334300, 8.320721403598817300 ) ) ; +#17085 = FACE_OUTER_BOUND ( 'NONE', #48458, .T. ) ; +#17086 = ORIENTED_EDGE ( 'NONE', *, *, #11883, .T. ) ; +#17087 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17088 = ORIENTED_EDGE ( 'NONE', *, *, #51507, .T. ) ; +#17089 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 30.50000000000000400, -4.865812075874393000 ) ) ; +#17090 = AXIS2_PLACEMENT_3D ( 'NONE', #40327, #27863, #46555 ) ; +#17091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17093 = CONICAL_SURFACE ( 'NONE', #69670, 10.50000000000009600, 0.7853981633974500600 ) ; +#17092 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17094 = CYLINDRICAL_SURFACE ( 'NONE', #22631, 10.00000000000000200 ) ; +#17095 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472400, 45.86071428647295500, -28.36868303842827600 ) ) ; +#17096 = ORIENTED_EDGE ( 'NONE', *, *, #24737, .T. ) ; +#17097 = ORIENTED_EDGE ( 'NONE', *, *, #14745, .F. ) ; +#17098 = CARTESIAN_POINT ( 'NONE', ( -9.092674244997628100, 44.45000000000013800, -1.898798425752287000 ) ) ; +#17099 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109258100, 49.97143078992716200, -28.37063977681169600 ) ) ; +#17100 = ORIENTED_EDGE ( 'NONE', *, *, #34307, .F. ) ; +#17101 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 32.83333333333333600, 1.741883078712340300 ) ) ; +#17102 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17103 = ORIENTED_EDGE ( 'NONE', *, *, #6561, .F. ) ; +#17104 = CARTESIAN_POINT ( 'NONE', ( -4.745461813558205400, 18.09617548195244700, -28.64146967277530100 ) ) ; +#17105 = VERTEX_POINT ( 'NONE', #53596 ) ; +#17106 = FACE_OUTER_BOUND ( 'NONE', #53286, .T. ) ; +#17107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49164, #5672, #67961, #30714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882720949200E-007, 0.0004435496461727845600 ), + .UNSPECIFIED. ) ; +#17108 = ORIENTED_EDGE ( 'NONE', *, *, #24431, .T. ) ; +#17109 = CARTESIAN_POINT ( 'NONE', ( 16.42680742378718900, 50.41467875488771700, -28.60519792699601600 ) ) ; +#17110 = CARTESIAN_POINT ( 'NONE', ( -3.221259145455643800, 49.66476764525111800, -28.30311733712048600 ) ) ; +#17111 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 41.44069092601378700, -28.35186440610859300 ) ) ; +#17112 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146655000, 10.29130857014957100, -28.37223374938505000 ) ) ; +#17113 = CARTESIAN_POINT ( 'NONE', ( 22.83498353399128800, 6.082508272674889600, -24.91951946573778200 ) ) ; +#17114 = CONICAL_SURFACE ( 'NONE', #73275, 10.00000000000009400, 0.7853981633974447300 ) ; +#17115 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571444300, 67.92318720225466700, -28.70555803803047500 ) ) ; +#17116 = CARTESIAN_POINT ( 'NONE', ( -10.44724444045301200, 91.89098624823356000, -28.70555803803001600 ) ) ; +#17117 = EDGE_LOOP ( 'NONE', ( #69954, #67963, #72042 ) ) ; +#17118 = VECTOR ( 'NONE', #18440, 1000.000000000000000 ) ; +#17119 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 39.37705528805139500, -28.20555803802995200 ) ) ; +#17121 = EDGE_CURVE ( 'NONE', #57505, #1761, #79707, .T. ) ; +#17120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50585, #13391, #69380, #32127 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795529600 ), + .UNSPECIFIED. ) ; +#17122 = CARTESIAN_POINT ( 'NONE', ( 19.77838122013814700, 101.1567629939879000, -21.65277118176583900 ) ) ; +#17123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#17124 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072152600E-015, 19.30000000000009000, -28.70555803802992800 ) ) ; +#17125 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164300, 50.90033558196071800, -28.70555803803030800 ) ) ; +#17126 = EDGE_CURVE ( 'NONE', #55596, #35431, #34138, .T. ) ; +#17127 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#17128 = ADVANCED_FACE ( 'NONE', ( #65134 ), #13538, .T. ) ; +#17129 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 20.24660241562189400, -28.20555803802994200 ) ) ; +#17130 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 12.15857157145701000, -28.20555803802994200 ) ) ; +#17131 = EDGE_CURVE ( 'NONE', #4680, #78012, #30101, .T. ) ; +#17132 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.56248377813390200, -28.32723995587615900 ) ) ; +#17133 = AXIS2_PLACEMENT_3D ( 'NONE', #17426, #23696, #11180 ) ; +#17134 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 36.33333333333334300, 2.794441961969998300 ) ) ; +#17135 = CONICAL_SURFACE ( 'NONE', #10505, 10.50000000000009600, 0.7853981633974482800 ) ; +#17136 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#17137 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655948500, 49.42298334620738800, -28.20555803802997400 ) ) ; +#17138 = FACE_OUTER_BOUND ( 'NONE', #35899, .T. ) ; +#17139 = VERTEX_POINT ( 'NONE', #66392 ) ; +#17140 = CONICAL_SURFACE ( 'NONE', #25431, 10.50000000000009400, 0.7853981633974500600 ) ; +#17141 = ADVANCED_FACE ( 'NONE', ( #52424 ), #44598, .T. ) ; +#17142 = AXIS2_PLACEMENT_3D ( 'NONE', #46567, #8780, #15612 ) ; +#17143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17144 = CARTESIAN_POINT ( 'NONE', ( -8.539877117997786400, 57.15000000000000600, -5.390534384887792500 ) ) ; +#17145 = ORIENTED_EDGE ( 'NONE', *, *, #31896, .T. ) ; +#17146 = EDGE_CURVE ( 'NONE', #40749, #8560, #61235, .T. ) ; +#17147 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31069, #68314, #28, #43534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527041627800E-007, 0.0007303749718167598700 ), + .UNSPECIFIED. ) ; +#17148 = EDGE_CURVE ( 'NONE', #63545, #64305, #46564, .T. ) ; +#17149 = AXIS2_PLACEMENT_3D ( 'NONE', #14952, #58478, #21230 ) ; +#17150 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17151 = CIRCLE ( 'NONE', #50440, 10.50000000000009600 ) ; +#17152 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#17153 = CIRCLE ( 'NONE', #68392, 10.00000000000009400 ) ; +#17154 = ORIENTED_EDGE ( 'NONE', *, *, #27880, .T. ) ; +#17155 = ADVANCED_FACE ( 'NONE', ( #77740 ), #59249, .T. ) ; +#17156 = CARTESIAN_POINT ( 'NONE', ( -24.37904364914729200, 5.310499872093026300, -22.17520504136216500 ) ) ; +#17157 = AXIS2_PLACEMENT_3D ( 'NONE', #19291, #75322, #38027 ) ; +#17159 = VERTEX_POINT ( 'NONE', #10894 ) ; +#17158 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489654800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#17160 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17161 = EDGE_CURVE ( 'NONE', #54633, #25204, #19685, .T. ) ; +#17162 = ORIENTED_EDGE ( 'NONE', *, *, #40681, .T. ) ; +#17163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17164 = AXIS2_PLACEMENT_3D ( 'NONE', #75032, #25541, #12770 ) ; +#17165 = AXIS2_PLACEMENT_3D ( 'NONE', #8582, #52083, #14864 ) ; +#17166 = PLANE ( 'NONE', #73746 ) ; +#17167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17168 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16955, #60213, #41673, #60480 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287148516700E-007, 0.0004318378175225230000 ), + .UNSPECIFIED. ) ; +#17169 = CONICAL_SURFACE ( 'NONE', #10236, 10.50000000000009600, 0.7853981633974500600 ) ; +#17170 = ADVANCED_FACE ( 'NONE', ( #11579 ), #26184, .T. ) ; +#17171 = FACE_OUTER_BOUND ( 'NONE', #79946, .T. ) ; +#17172 = VERTEX_POINT ( 'NONE', #42134 ) ; +#17173 = VERTEX_POINT ( 'NONE', #4885 ) ; +#17174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17175 = ORIENTED_EDGE ( 'NONE', *, *, #7418, .T. ) ; +#17176 = ORIENTED_EDGE ( 'NONE', *, *, #61096, .F. ) ; +#17177 = CIRCLE ( 'NONE', #30291, 10.00000000000009200 ) ; +#17178 = FACE_OUTER_BOUND ( 'NONE', #21701, .T. ) ; +#17179 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 4.833333333333341900, 3.794441961969996900 ) ) ; +#17180 = ORIENTED_EDGE ( 'NONE', *, *, #7428, .F. ) ; +#17181 = CARTESIAN_POINT ( 'NONE', ( -4.512728101709769600, 61.47860083896993900, -28.56001287362839500 ) ) ; +#17182 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 45.00000000000001400, 6.794441961969995200 ) ) ; +#17183 = CIRCLE ( 'NONE', #77920, 10.50000000000009600 ) ; +#17184 = AXIS2_PLACEMENT_3D ( 'NONE', #60911, #23635, #67149 ) ; +#17186 = ORIENTED_EDGE ( 'NONE', *, *, #30035, .T. ) ; +#17185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17187 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#17188 = ORIENTED_EDGE ( 'NONE', *, *, #41939, .F. ) ; +#17189 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#17190 = CARTESIAN_POINT ( 'NONE', ( 3.985751803131509300, 70.01994747561617800, -28.24986299608857400 ) ) ; +#17191 = FACE_OUTER_BOUND ( 'NONE', #32857, .T. ) ; +#17192 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 10.16666666666669600, -9.205558038030003900 ) ) ; +#17193 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43306, #37052, #74356, #49535 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539858400, 0.0009765394310395701500 ), + .UNSPECIFIED. ) ; +#17194 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17196 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17195 = FACE_OUTER_BOUND ( 'NONE', #13578, .T. ) ; +#17197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17198 = AXIS2_PLACEMENT_3D ( 'NONE', #25079, #68600, #31351 ) ; +#17199 = ORIENTED_EDGE ( 'NONE', *, *, #80275, .F. ) ; +#17200 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909500, 64.83849307182684600, -28.68631150211663100 ) ) ; +#17201 = EDGE_CURVE ( 'NONE', #35539, #43256, #42686, .T. ) ; +#17202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17203 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17204 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#17205 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#17206 = AXIS2_PLACEMENT_3D ( 'NONE', #26523, #69999, #32743 ) ; +#17207 = FACE_OUTER_BOUND ( 'NONE', #43493, .T. ) ; +#17208 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#17209 = VERTEX_POINT ( 'NONE', #60678 ) ; +#17210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17211 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#17212 = CONICAL_SURFACE ( 'NONE', #12871, 10.00000000000009200, 0.7853981633974447300 ) ; +#17213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17214 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217490200, 71.43945992495501700, -28.34042301926910700 ) ) ; +#17215 = CARTESIAN_POINT ( 'NONE', ( -3.031785615621753300, 51.31767869357339900, -28.25052235028429900 ) ) ; +#17217 = ORIENTED_EDGE ( 'NONE', *, *, #44608, .F. ) ; +#17216 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#17218 = FACE_OUTER_BOUND ( 'NONE', #19437, .T. ) ; +#17219 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 41.67701665379221500, -28.20555803802997400 ) ) ; +#17220 = ORIENTED_EDGE ( 'NONE', *, *, #43289, .T. ) ; +#17221 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465696900, 80.65007990305429100, -28.43638873268705300 ) ) ; +#17222 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345609300, 71.52472935029895500, -28.39317435246134000 ) ) ; +#17223 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 33.63556610137281700, -28.54207364681942500 ) ) ; +#17224 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17225 = CONICAL_SURFACE ( 'NONE', #13463, 10.00000000000009600, 0.7853981633974482800 ) ; +#17226 = CONICAL_SURFACE ( 'NONE', #39675, 10.50000000000009600, 0.7853981633974500600 ) ; +#17228 = EDGE_CURVE ( 'NONE', #53468, #891, #5206, .T. ) ; +#17227 = ORIENTED_EDGE ( 'NONE', *, *, #48792, .F. ) ; +#17229 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17230 = EDGE_CURVE ( 'NONE', #11971, #57450, #75787, .T. ) ; +#17231 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17232 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372565800, 77.93535825203923700, -28.53896444442201400 ) ) ; +#17233 = ORIENTED_EDGE ( 'NONE', *, *, #24027, .F. ) ; +#17234 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027360000, 82.22511094383830300, -28.55192314908412500 ) ) ; +#17235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17236 = EDGE_CURVE ( 'NONE', #39513, #69902, #71533, .T. ) ; +#17237 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57011, #38202, #63284, #26018 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736096602200E-007, 0.0009376786059871968900 ), + .UNSPECIFIED. ) ; +#17238 = EDGE_CURVE ( 'NONE', #43749, #12956, #57076, .T. ) ; +#17239 = CIRCLE ( 'NONE', #58494, 10.00000000000009200 ) ; +#17240 = AXIS2_PLACEMENT_3D ( 'NONE', #80606, #18330, #49551 ) ; +#17241 = ORIENTED_EDGE ( 'NONE', *, *, #29923, .T. ) ; +#17242 = ORIENTED_EDGE ( 'NONE', *, *, #75490, .F. ) ; +#17243 = ORIENTED_EDGE ( 'NONE', *, *, #3508, .T. ) ; +#17244 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 71.78933626866495400, -28.53923937255172300 ) ) ; +#17245 = ORIENTED_EDGE ( 'NONE', *, *, #6147, .T. ) ; +#17246 = ADVANCED_FACE ( 'NONE', ( #15476 ), #40744, .T. ) ; +#17247 = FACE_OUTER_BOUND ( 'NONE', #1991, .T. ) ; +#17248 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 51.00000000000000700, -1.205558038030005300 ) ) ; +#17249 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#17250 = VERTEX_POINT ( 'NONE', #7709 ) ; +#17251 = AXIS2_PLACEMENT_3D ( 'NONE', #1994, #45481, #8237 ) ; +#17252 = EDGE_LOOP ( 'NONE', ( #45111, #17624, #61840 ) ) ; +#17253 = EDGE_CURVE ( 'NONE', #66196, #19455, #2793, .T. ) ; +#17254 = EDGE_CURVE ( 'NONE', #11824, #60591, #42587, .T. ) ; +#17255 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999100, 60.24722181384566300, -28.70555803802999500 ) ) ; +#17256 = EDGE_CURVE ( 'NONE', #79214, #34668, #28185, .T. ) ; +#17257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17258 = ADVANCED_FACE ( 'NONE', ( #73864 ), #71914, .T. ) ; +#17259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17260 = CIRCLE ( 'NONE', #74246, 9.500000000000101300 ) ; +#17261 = ORIENTED_EDGE ( 'NONE', *, *, #22508, .F. ) ; +#17262 = AXIS2_PLACEMENT_3D ( 'NONE', #79025, #41704, #4462 ) ; +#17263 = ORIENTED_EDGE ( 'NONE', *, *, #70836, .F. ) ; +#17264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17265 = ORIENTED_EDGE ( 'NONE', *, *, #30428, .F. ) ; +#17266 = FACE_OUTER_BOUND ( 'NONE', #6461, .T. ) ; +#17267 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 59.28967419478899400, -28.59353418718932400 ) ) ; +#17268 = CIRCLE ( 'NONE', #43844, 10.00000000000009200 ) ; +#17269 = EDGE_CURVE ( 'NONE', #27463, #39773, #24222, .T. ) ; +#17270 = AXIS2_PLACEMENT_3D ( 'NONE', #42344, #5100, #48586 ) ; +#17271 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#17273 = EDGE_LOOP ( 'NONE', ( #28070, #30777, #21896, #66120 ) ) ; +#17272 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17275 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686900, 20.67701665379241400, -28.20555803802994200 ) ) ; +#17276 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 22.33333333333334600, -6.705558038030005700 ) ) ; +#17277 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801551600, 60.69966441803880700, -28.70555803803030800 ) ) ; +#17278 = PLANE ( 'NONE', #79712 ) ; +#17279 = CIRCLE ( 'NONE', #74029, 10.00000000000009200 ) ; +#17280 = ORIENTED_EDGE ( 'NONE', *, *, #38391, .F. ) ; +#17281 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48203, #66751, #17234, #60770 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.992498558050024900E-016, 0.001179148174663531800 ), + .UNSPECIFIED. ) ; +#17282 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510927100, 39.47143078992716200, -28.37063977681167500 ) ) ; +#17283 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17284 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#17285 = FACE_OUTER_BOUND ( 'NONE', #65700, .T. ) ; +#17286 = AXIS2_PLACEMENT_3D ( 'NONE', #9431, #15709, #46673 ) ; +#17287 = ORIENTED_EDGE ( 'NONE', *, *, #73253, .F. ) ; +#17288 = AXIS2_PLACEMENT_3D ( 'NONE', #65056, #27790, #71281 ) ; +#17289 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#17290 = CONICAL_SURFACE ( 'NONE', #22379, 10.50000000000009900, 0.7853981633974518300 ) ; +#17291 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 56.83333333333334300, 3.794441961969996900 ) ) ; +#17292 = EDGE_LOOP ( 'NONE', ( #67764, #69079, #28577 ) ) ; +#17293 = CARTESIAN_POINT ( 'NONE', ( 21.98487565344279200, 6.507562173278622600, -25.88815306470337400 ) ) ; +#17294 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 62.97376207875058900, -28.70555803802997700 ) ) ; +#17295 = EDGE_CURVE ( 'NONE', #61057, #21392, #13715, .T. ) ; +#17296 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17297 = AXIS2_PLACEMENT_3D ( 'NONE', #79391, #47798, #42085 ) ; +#17298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17299 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528187700, 28.63131911501876900, -28.51286550264507700 ) ) ; +#17300 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#17301 = ORIENTED_EDGE ( 'NONE', *, *, #28529, .T. ) ; +#17302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17303 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 32.93454006867177200, -28.70555803802998800 ) ) ; +#17304 = AXIS2_PLACEMENT_3D ( 'NONE', #13476, #56978, #19711 ) ; +#17305 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274716100, 35.04999999999996900, -28.20555803802995200 ) ) ; +#17306 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 51.62753447840813700, -28.38801640354866900 ) ) ; +#17307 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 60.90033558196107300, -28.70555803802997700 ) ) ; +#17308 = CIRCLE ( 'NONE', #67637, 10.50000000000009600 ) ; +#17309 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17310 = FACE_OUTER_BOUND ( 'NONE', #73047, .T. ) ; +#17311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17312 = ORIENTED_EDGE ( 'NONE', *, *, #19322, .F. ) ; +#17313 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 12.49926474563211300, -28.70555803802994200 ) ) ; +#17314 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390783700, 14.68533208989794000, -28.53910738522635500 ) ) ; +#17315 = VERTEX_POINT ( 'NONE', #20789 ) ; +#17316 = AXIS2_PLACEMENT_3D ( 'NONE', #25085, #68606, #31355 ) ; +#17317 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17318 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 33.15857157145691000, -28.20555803802996700 ) ) ; +#17319 = ORIENTED_EDGE ( 'NONE', *, *, #33681, .F. ) ; +#17320 = VERTEX_POINT ( 'NONE', #64053 ) ; +#17321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17322 = ORIENTED_EDGE ( 'NONE', *, *, #17373, .T. ) ; +#17323 = CARTESIAN_POINT ( 'NONE', ( -16.59217690834426800, 9.256601160234005500, -28.57803565087434400 ) ) ; +#17324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17325 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 101.5999999999999900, 16.29444196196997700 ) ) ; +#17326 = PLANE ( 'NONE', #55848 ) ; +#17327 = ORIENTED_EDGE ( 'NONE', *, *, #12121, .T. ) ; +#17328 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851106600, 25.50238095238044200, -28.70555803802994200 ) ) ; +#17329 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#17330 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 80.37705528805136600, -28.20555803802997700 ) ) ; +#17332 = ADVANCED_FACE ( 'NONE', ( #50462 ), #22262, .F. ) ; +#17331 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30591, #67843, #12081, #55580 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476221581271900E-007, 0.0002670039411972366100 ), + .UNSPECIFIED. ) ; +#17333 = VECTOR ( 'NONE', #50176, 1000.000000000000000 ) ; +#17334 = VERTEX_POINT ( 'NONE', #39531 ) ; +#17335 = EDGE_CURVE ( 'NONE', #52738, #50287, #57299, .T. ) ; +#17336 = ORIENTED_EDGE ( 'NONE', *, *, #18539, .F. ) ; +#17337 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17339 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 63.16666666666667900, -12.20555803803000000 ) ) ; +#17340 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70814, #21341, #71090, #33836 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001246264537621163500 ), + .UNSPECIFIED. ) ; +#17341 = ORIENTED_EDGE ( 'NONE', *, *, #74410, .T. ) ; +#17342 = EDGE_CURVE ( 'NONE', #52871, #47046, #9608, .T. ) ; +#17343 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30198, #42641, #61462, #24182 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726977425200, 0.0008135742306951441500 ), + .UNSPECIFIED. ) ; +#17344 = CIRCLE ( 'NONE', #20904, 9.500000000000156300 ) ; +#17345 = ADVANCED_FACE ( 'NONE', ( #38760 ), #36833, .T. ) ; +#17346 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 28.33333333333334600, 3.124568980892187500 ) ) ; +#17347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17348 = EDGE_CURVE ( 'NONE', #60512, #301, #53399, .T. ) ; +#17349 = ORIENTED_EDGE ( 'NONE', *, *, #16977, .F. ) ; +#17350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17351 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387502000, 85.13282980700523700, -28.53914313452735000 ) ) ; +#17352 = EDGE_CURVE ( 'NONE', #55080, #13752, #7633, .T. ) ; +#17353 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48533, #5045, #61105, #23844 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389876712400E-007, 0.0008082646680357299800 ), + .UNSPECIFIED. ) ; +#17354 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995689900, 14.98096581827296500, -28.69431509262338100 ) ) ; +#17355 = EDGE_CURVE ( 'NONE', #5879, #25229, #69928, .T. ) ; +#17356 = EDGE_CURVE ( 'NONE', #48416, #64482, #55330, .T. ) ; +#17357 = CIRCLE ( 'NONE', #41125, 10.00000000000009400 ) ; +#17358 = ORIENTED_EDGE ( 'NONE', *, *, #73842, .F. ) ; +#17359 = CARTESIAN_POINT ( 'NONE', ( -6.608390000984231300, 44.44999999999999600, 3.855039369989258900 ) ) ; +#17360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17361 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 30.66666666666668200, -6.705558038030000400 ) ) ; +#17362 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17363 = ORIENTED_EDGE ( 'NONE', *, *, #53570, .T. ) ; +#17364 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 70.36203212531316400, -28.38801640354855800 ) ) ; +#17365 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17366 = EDGE_LOOP ( 'NONE', ( #77823, #74385, #52618, #50596 ) ) ; +#17367 = AXIS2_PLACEMENT_3D ( 'NONE', #25453, #68943, #31704 ) ; +#17368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27941, #3124, #21921, #65470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082060941500E-007, 0.001076191670833092200 ), + .UNSPECIFIED. ) ; +#17369 = EDGE_CURVE ( 'NONE', #39642, #12957, #5713, .T. ) ; +#17370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17371 = EDGE_CURVE ( 'NONE', #77820, #44639, #80012, .T. ) ; +#17372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17373 = EDGE_CURVE ( 'NONE', #14948, #35663, #3742, .T. ) ; +#17374 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528300, 14.05000000000000200, -28.20555803802992800 ) ) ; +#17375 = ADVANCED_FACE ( 'NONE', ( #20309 ), #40331, .T. ) ; +#17376 = CARTESIAN_POINT ( 'NONE', ( -4.036255108181025600, 89.94924284854707300, -28.20555803802997700 ) ) ; +#17377 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999100, 17.63176086632761000, -28.70555803803025800 ) ) ; +#17378 = CARTESIAN_POINT ( 'NONE', ( 20.25821439275557600, 7.370892851309931400, -27.21150915403153200 ) ) ; +#17379 = AXIS2_PLACEMENT_3D ( 'NONE', #27953, #9402, #40415 ) ; +#17380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17381 = CONICAL_SURFACE ( 'NONE', #39520, 10.50000000000009400, 0.7853981633974482800 ) ; +#17382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17383 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343285200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#17384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17385 = ORIENTED_EDGE ( 'NONE', *, *, #50771, .T. ) ; +#17386 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#17387 = ORIENTED_EDGE ( 'NONE', *, *, #2698, .T. ) ; +#17388 = CARTESIAN_POINT ( 'NONE', ( 18.67372989152355000, 98.94804499444336400, -25.51053429762364600 ) ) ; +#17389 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17390 = AXIS2_PLACEMENT_3D ( 'NONE', #63485, #1162, #32446 ) ; +#17391 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17392 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17393 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1583, #76114, #45063, #7834 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#17394 = FACE_OUTER_BOUND ( 'NONE', #32220, .T. ) ; +#17395 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.16749699759769500, -28.20555803802997700 ) ) ; +#17396 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#17397 = FACE_OUTER_BOUND ( 'NONE', #8015, .T. ) ; +#17398 = ORIENTED_EDGE ( 'NONE', *, *, #74882, .T. ) ; +#17399 = ORIENTED_EDGE ( 'NONE', *, *, #59756, .T. ) ; +#17400 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 34.16666666666669300, -3.349151577478988200 ) ) ; +#17401 = ORIENTED_EDGE ( 'NONE', *, *, #27533, .F. ) ; +#17402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17403 = CIRCLE ( 'NONE', #27287, 9.500000000000097700 ) ; +#17404 = EDGE_LOOP ( 'NONE', ( #1685, #27555, #77191, #54355, #52313, #56385 ) ) ; +#17405 = ORIENTED_EDGE ( 'NONE', *, *, #29925, .T. ) ; +#17406 = ORIENTED_EDGE ( 'NONE', *, *, #55106, .F. ) ; +#17407 = ORIENTED_EDGE ( 'NONE', *, *, #8875, .T. ) ; +#17408 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944354600, 20.79955846777000500, -28.38339015421969000 ) ) ; +#17409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17410 = AXIS2_PLACEMENT_3D ( 'NONE', #8001, #57797, #26550 ) ; +#17412 = VERTEX_POINT ( 'NONE', #59389 ) ; +#17411 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823696000, 17.19543746431594000, -28.61277292027076400 ) ) ; +#17413 = CARTESIAN_POINT ( 'NONE', ( -3.236828601321048500, 57.15000000000002700, -10.08306106827866200 ) ) ; +#17414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17415 = ORIENTED_EDGE ( 'NONE', *, *, #65466, .F. ) ; +#17416 = CIRCLE ( 'NONE', #61580, 10.50000000000009600 ) ; +#17417 = ORIENTED_EDGE ( 'NONE', *, *, #70221, .F. ) ; +#17418 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571400400, 41.52858243452107000, -28.70555803802997700 ) ) ; +#17419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17420 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999984100, -28.20555803803014400 ) ) ; +#17421 = VERTEX_POINT ( 'NONE', #53111 ) ; +#17422 = ORIENTED_EDGE ( 'NONE', *, *, #78562, .F. ) ; +#17423 = EDGE_CURVE ( 'NONE', #62129, #33406, #65573, .T. ) ; +#17424 = ORIENTED_EDGE ( 'NONE', *, *, #34589, .F. ) ; +#17425 = VERTEX_POINT ( 'NONE', #78157 ) ; +#17426 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#17427 = AXIS2_PLACEMENT_3D ( 'NONE', #74874, #55813, #12869 ) ; +#17428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17429 = CIRCLE ( 'NONE', #35456, 10.00000000000009400 ) ; +#17430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17431 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#17432 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 70.34267608797598800, -28.20555803802997700 ) ) ; +#17433 = PLANE ( 'NONE', #14434 ) ; +#17434 = ORIENTED_EDGE ( 'NONE', *, *, #38282, .T. ) ; +#17435 = ADVANCED_FACE ( 'NONE', ( #67993 ), #21859, .T. ) ; +#17436 = AXIS2_PLACEMENT_3D ( 'NONE', #13555, #57057, #19794 ) ; +#17437 = FACE_OUTER_BOUND ( 'NONE', #80267, .T. ) ; +#17439 = EDGE_LOOP ( 'NONE', ( #11543, #74153, #66637, #28463 ) ) ; +#17438 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609044400, 60.13716795162677200, -28.48697406221666700 ) ) ; +#17440 = ORIENTED_EDGE ( 'NONE', *, *, #880, .F. ) ; +#17441 = CARTESIAN_POINT ( 'NONE', ( -17.24374441227740100, 60.61266709210547500, -28.45058834003056300 ) ) ; +#17442 = ORIENTED_EDGE ( 'NONE', *, *, #76180, .F. ) ; +#17443 = ADVANCED_FACE ( 'NONE', ( #28152 ), #32943, .F. ) ; +#17444 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 2.666666666666682100, -5.535685056952199400 ) ) ; +#17445 = AXIS2_PLACEMENT_3D ( 'NONE', #1167, #38408, #63491 ) ; +#17446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17447 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 42.83333333333334300, -9.205558038030003900 ) ) ; +#17448 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61969, #5930, #30952, #74472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286328483400E-007, 0.0007303759720926885800 ), + .UNSPECIFIED. ) ; +#17449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17451 = EDGE_CURVE ( 'NONE', #49536, #4381, #49458, .T. ) ; +#17452 = CIRCLE ( 'NONE', #40011, 9.500000000000097700 ) ; +#17453 = ADVANCED_FACE ( 'NONE', ( #51398 ), #64117, .F. ) ; +#17454 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000412100, 88.17143691309411200, -28.36981695106809600 ) ) ; +#17455 = CIRCLE ( 'NONE', #60907, 10.50000000000009200 ) ; +#17456 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 8.000000000000007100, 6.794441961969995200 ) ) ; +#17457 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .T. ) ; +#17458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17459 = ORIENTED_EDGE ( 'NONE', *, *, #21642, .T. ) ; +#17460 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17461 = ORIENTED_EDGE ( 'NONE', *, *, #80624, .F. ) ; +#17462 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35385, #72633, #4335, #47834 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225946018500E-007, 0.001119324643800051300 ), + .UNSPECIFIED. ) ; +#17463 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 89.77559325427182600, -28.45987523529581900 ) ) ; +#17464 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.15857157145701000, -28.20555803802996700 ) ) ; +#17465 = ADVANCED_FACE ( 'NONE', ( #66065 ), #31015, .T. ) ; +#17466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17467 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 26.20389005397397500, -28.37519436813177600 ) ) ; +#17468 = CIRCLE ( 'NONE', #12853, 10.00000000000009600 ) ; +#17470 = ORIENTED_EDGE ( 'NONE', *, *, #47228, .F. ) ; +#17469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17471 = FACE_OUTER_BOUND ( 'NONE', #42962, .T. ) ; +#17472 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 71.65075715145309200, -28.20555803802998100 ) ) ; +#17473 = ORIENTED_EDGE ( 'NONE', *, *, #1298, .T. ) ; +#17475 = EDGE_CURVE ( 'NONE', #16848, #4256, #18359, .T. ) ; +#17474 = VERTEX_POINT ( 'NONE', #28965 ) ; +#17476 = EDGE_CURVE ( 'NONE', #35143, #36791, #51032, .T. ) ; +#17477 = ORIENTED_EDGE ( 'NONE', *, *, #76917, .T. ) ; +#17478 = FACE_OUTER_BOUND ( 'NONE', #49340, .T. ) ; +#17479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69572, #1300, #63624, #26367 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397686438800E-007, 0.0003301092607753427100 ), + .UNSPECIFIED. ) ; +#17481 = ORIENTED_EDGE ( 'NONE', *, *, #45893, .F. ) ; +#17482 = ORIENTED_EDGE ( 'NONE', *, *, #29492, .F. ) ; +#17483 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#17484 = ORIENTED_EDGE ( 'NONE', *, *, #70687, .T. ) ; +#17485 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17486 = EDGE_LOOP ( 'NONE', ( #61872, #66286, #66895 ) ) ; +#17487 = ORIENTED_EDGE ( 'NONE', *, *, #72180, .T. ) ; +#17488 = EDGE_LOOP ( 'NONE', ( #49108, #75975, #8232, #71592, #2958 ) ) ; +#17489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17490 = VERTEX_POINT ( 'NONE', #60210 ) ; +#17491 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17492 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224807500, 80.09037803491487800, -28.29483400905886700 ) ) ; +#17493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17494 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#17495 = AXIS2_PLACEMENT_3D ( 'NONE', #4744, #48235, #11025 ) ; +#17496 = ORIENTED_EDGE ( 'NONE', *, *, #51723, .T. ) ; +#17497 = EDGE_CURVE ( 'NONE', #63610, #20890, #36608, .T. ) ; +#17498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17499 = EDGE_CURVE ( 'NONE', #50710, #49536, #47508, .T. ) ; +#17500 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28029, #9195, #15488, #71513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710430082100E-007, 0.0008482615949370722700 ), + .UNSPECIFIED. ) ; +#17501 = EDGE_CURVE ( 'NONE', #38445, #11747, #22167, .T. ) ; +#17502 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17503 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999899600, 60.79999999999991900, -28.70555803802997700 ) ) ; +#17504 = EDGE_CURVE ( 'NONE', #52871, #57450, #34922, .T. ) ; +#17505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17506 = CARTESIAN_POINT ( 'NONE', ( 16.99797853026623400, 39.28907435382947700, -28.25433648786265600 ) ) ; +#17507 = FACE_OUTER_BOUND ( 'NONE', #31238, .T. ) ; +#17508 = AXIS2_PLACEMENT_3D ( 'NONE', #28069, #71554, #34295 ) ; +#17509 = EDGE_LOOP ( 'NONE', ( #75848, #53020, #24365, #24971 ) ) ; +#17510 = ORIENTED_EDGE ( 'NONE', *, *, #28957, .T. ) ; +#17511 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973390300, 87.33501542110235500, -28.70555803803002000 ) ) ; +#17512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17513 = ORIENTED_EDGE ( 'NONE', *, *, #4220, .F. ) ; +#17514 = EDGE_LOOP ( 'NONE', ( #51305, #62747, #53269 ) ) ; +#17515 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999975100, 80.16749699759752400, -28.20555803803014400 ) ) ; +#17516 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 20.24660241562189000, -28.20555803802994200 ) ) ; +#17517 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#17518 = CONICAL_SURFACE ( 'NONE', #78058, 10.00000000000009200, 0.7853981633974447300 ) ; +#17519 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001100, 73.99926474563209000, -28.70555803802999500 ) ) ; +#17520 = AXIS2_PLACEMENT_3D ( 'NONE', #41036, #16298, #3757 ) ; +#17521 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17522 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 12.15857157145701000, -28.20555803802994200 ) ) ; +#17523 = ORIENTED_EDGE ( 'NONE', *, *, #42460, .F. ) ; +#17524 = AXIS2_PLACEMENT_3D ( 'NONE', #58974, #46428, #65279 ) ; +#17525 = ORIENTED_EDGE ( 'NONE', *, *, #46639, .T. ) ; +#17526 = CIRCLE ( 'NONE', #42066, 9.500000000000101300 ) ; +#17527 = ORIENTED_EDGE ( 'NONE', *, *, #15466, .T. ) ; +#17528 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17529 = ORIENTED_EDGE ( 'NONE', *, *, #1308, .F. ) ; +#17530 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 48.83333333333331400, 0.9380355014189731800 ) ) ; +#17531 = AXIS2_PLACEMENT_3D ( 'NONE', #25084, #19082, #6575 ) ; +#17532 = EDGE_CURVE ( 'NONE', #14568, #36910, #7657, .T. ) ; +#17533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17534 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14441, #70178, #20699, #64237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002531676489387526200, 0.002625815492170422100 ), + .UNSPECIFIED. ) ; +#17535 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17537 = ADVANCED_FACE ( 'NONE', ( #80635 ), #23466, .T. ) ; +#17538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17539 = CIRCLE ( 'NONE', #55255, 10.00000000000009200 ) ; +#17540 = EDGE_CURVE ( 'NONE', #11944, #3570, #14460, .T. ) ; +#17541 = FACE_OUTER_BOUND ( 'NONE', #54206, .T. ) ; +#17542 = EDGE_LOOP ( 'NONE', ( #51871, #9748, #29190, #40321 ) ) ; +#17543 = AXIS2_PLACEMENT_3D ( 'NONE', #34119, #40355, #71378 ) ; +#17544 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17545 = ADVANCED_FACE ( 'NONE', ( #16414 ), #76721, .T. ) ; +#17546 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 70.34267608797598800, -28.20555803802997700 ) ) ; +#17547 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17548 = PLANE ( 'NONE', #66732 ) ; +#17549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17550 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 20.16666666666667500, 1.741883078712356500 ) ) ; +#17551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17552 = CONICAL_SURFACE ( 'NONE', #44002, 10.00000000000009200, 0.7853981633974447300 ) ; +#17553 = ORIENTED_EDGE ( 'NONE', *, *, #37321, .T. ) ; +#17554 = AXIS2_PLACEMENT_3D ( 'NONE', #49972, #12781, #56256 ) ; +#17555 = ORIENTED_EDGE ( 'NONE', *, *, #33928, .T. ) ; +#17556 = ADVANCED_FACE ( 'NONE', ( #29106 ), #30024, .T. ) ; +#17557 = EDGE_LOOP ( 'NONE', ( #79618, #56780, #730, #43296 ) ) ; +#17558 = CONICAL_SURFACE ( 'NONE', #32382, 10.00000000000009200, 0.7853981633974447300 ) ; +#17559 = ORIENTED_EDGE ( 'NONE', *, *, #21716, .F. ) ; +#17560 = ORIENTED_EDGE ( 'NONE', *, *, #40605, .F. ) ; +#17561 = ORIENTED_EDGE ( 'NONE', *, *, #54436, .T. ) ; +#17562 = ORIENTED_EDGE ( 'NONE', *, *, #24625, .T. ) ; +#17563 = ORIENTED_EDGE ( 'NONE', *, *, #29436, .F. ) ; +#17564 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868729600, 60.01994747561622000, -28.24986299608849900 ) ) ; +#17565 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17566 = VERTEX_POINT ( 'NONE', #79764 ) ; +#17567 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#17568 = ORIENTED_EDGE ( 'NONE', *, *, #56258, .T. ) ; +#17569 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17570 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74433, #80679, #6152, #49630 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459157314486400E-007, 0.0007679767755143082300 ), + .UNSPECIFIED. ) ; +#17571 = ADVANCED_FACE ( 'NONE', ( #45540 ), #27110, .F. ) ; +#17572 = CARTESIAN_POINT ( 'NONE', ( 3.639502927797290800, 9.932503002402294000, -28.25438406275899800 ) ) ; +#17573 = EDGE_LOOP ( 'NONE', ( #76950, #8980, #53208 ) ) ; +#17574 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17575 = CONICAL_SURFACE ( 'NONE', #20819, 10.00000000000009200, 0.7853981633974447300 ) ; +#17576 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#17577 = EDGE_CURVE ( 'NONE', #1643, #71109, #43609, .T. ) ; +#17578 = ORIENTED_EDGE ( 'NONE', *, *, #52333, .T. ) ; +#17579 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 54.66666666666667100, -5.535685056952199400 ) ) ; +#17580 = ORIENTED_EDGE ( 'NONE', *, *, #1888, .T. ) ; +#17581 = CARTESIAN_POINT ( 'NONE', ( 16.08618408563612300, 7.827631828727684900, -28.54394830537791700 ) ) ; +#17582 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#17583 = VERTEX_POINT ( 'NONE', #48713 ) ; +#17584 = ORIENTED_EDGE ( 'NONE', *, *, #28026, .T. ) ; +#17585 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495029600, 20.90771342879323700, -28.53891855579987800 ) ) ; +#17586 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41787, #79087, #10805, #54309 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697316460300E-007, 0.0008724363063898067300 ), + .UNSPECIFIED. ) ; +#17587 = ORIENTED_EDGE ( 'NONE', *, *, #68374, .F. ) ; +#17588 = ORIENTED_EDGE ( 'NONE', *, *, #65865, .T. ) ; +#17589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17590 = CIRCLE ( 'NONE', #26962, 9.500000000000099500 ) ; +#17591 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17592 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537520300, 80.20590598242371500, -28.39369363572360400 ) ) ; +#17593 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528177500, 49.63131911501876200, -28.51286550264510900 ) ) ; +#17594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#17595 = ORIENTED_EDGE ( 'NONE', *, *, #22007, .F. ) ; +#17596 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17597 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 20.43250300240229200, -28.20555803802995200 ) ) ; +#17598 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702726400, 62.22511094383828100, -28.55192314908443800 ) ) ; +#17599 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17600 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#17601 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567146100, 39.35339758437810100, -28.20555803802995200 ) ) ; +#17602 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 89.60439022488337500, -28.70555803802997700 ) ) ; +#17603 = EDGE_CURVE ( 'NONE', #27318, #25568, #1779, .T. ) ; +#17604 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17605 = FACE_OUTER_BOUND ( 'NONE', #47169, .T. ) ; +#17606 = VERTEX_POINT ( 'NONE', #11506 ) ; +#17607 = EDGE_CURVE ( 'NONE', #66453, #22393, #74036, .T. ) ; +#17608 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#17609 = ORIENTED_EDGE ( 'NONE', *, *, #6191, .T. ) ; +#17610 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 64.13556610137280200, -28.54207364681942500 ) ) ; +#17611 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#17612 = AXIS2_PLACEMENT_3D ( 'NONE', #54127, #16896, #60431 ) ; +#17613 = EDGE_CURVE ( 'NONE', #49285, #48282, #60214, .T. ) ; +#17614 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000039100, 71.07757630314186800, -28.53861367218609900 ) ) ; +#17615 = EDGE_CURVE ( 'NONE', #76994, #24987, #78712, .T. ) ; +#17616 = AXIS2_PLACEMENT_3D ( 'NONE', #31435, #18901, #6398 ) ; +#17617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17618 = CARTESIAN_POINT ( 'NONE', ( 15.51770601915501400, 8.964587961689977300, -28.65180968932673600 ) ) ; +#17619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17620 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 61.00000000000001400, 9.794441961969996100 ) ) ; +#17621 = VERTEX_POINT ( 'NONE', #67786 ) ; +#17622 = ORIENTED_EDGE ( 'NONE', *, *, #36302, .F. ) ; +#17623 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819155100, 61.65075715145276500, -28.20555803803005900 ) ) ; +#17624 = ORIENTED_EDGE ( 'NONE', *, *, #46411, .T. ) ; +#17625 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 26.16666666666667900, -6.205558038030004800 ) ) ; +#17626 = AXIS2_PLACEMENT_3D ( 'NONE', #12777, #75042, #37744 ) ; +#17627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17628 = EDGE_CURVE ( 'NONE', #41995, #58782, #59573, .T. ) ; +#17629 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14350, #51569, #64151, #26873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898955300 ), + .UNSPECIFIED. ) ; +#17630 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17631 = EDGE_CURVE ( 'NONE', #26548, #13975, #10558, .T. ) ; +#17632 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#17633 = CONICAL_SURFACE ( 'NONE', #15345, 10.50000000000009600, 0.7853981633974518300 ) ; +#17634 = ORIENTED_EDGE ( 'NONE', *, *, #41427, .F. ) ; +#17635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17636 = ORIENTED_EDGE ( 'NONE', *, *, #8599, .T. ) ; +#17637 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670952900, 17.44136558227936400, -28.48677465922826700 ) ) ; +#17638 = FACE_BOUND ( 'NONE', #19200, .T. ) ; +#17639 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 28.50000000000001100, 6.847000845227641200 ) ) ; +#17640 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#17641 = ORIENTED_EDGE ( 'NONE', *, *, #67093, .F. ) ; +#17642 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .F. ) ; +#17643 = ORIENTED_EDGE ( 'NONE', *, *, #26056, .F. ) ; +#17644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17645 = CARTESIAN_POINT ( 'NONE', ( -3.985751803131092800, 90.01994747561644800, -28.24986299608865200 ) ) ; +#17647 = ORIENTED_EDGE ( 'NONE', *, *, #55987, .T. ) ; +#17646 = EDGE_CURVE ( 'NONE', #19435, #36509, #62149, .T. ) ; +#17648 = AXIS2_PLACEMENT_3D ( 'NONE', #60761, #35724, #17224 ) ; +#17649 = AXIS2_PLACEMENT_3D ( 'NONE', #14871, #58398, #21147 ) ; +#17650 = FACE_OUTER_BOUND ( 'NONE', #69151, .T. ) ; +#17651 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195355300, 38.68365405593805700, -28.35038903107270500 ) ) ; +#17652 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529600, 45.54999999999999700, -28.20555803802996700 ) ) ; +#17653 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#17654 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105668500, 45.54999999999998300, -28.70555803802996700 ) ) ; +#17655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17656 = CIRCLE ( 'NONE', #50427, 9.500000000000097700 ) ; +#17657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17658 = EDGE_LOOP ( 'NONE', ( #65650, #26424, #67679 ) ) ; +#17659 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#17660 = EDGE_LOOP ( 'NONE', ( #67916, #72622, #72069, #66474, #62992, #20557, #41131, #19409 ) ) ; +#17661 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#17662 = ORIENTED_EDGE ( 'NONE', *, *, #75888, .T. ) ; +#17663 = VERTEX_POINT ( 'NONE', #37020 ) ; +#17664 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37385, #18654, #43632, #6409 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728437678826500E-007, 0.0007763347809199545100 ), + .UNSPECIFIED. ) ; +#17665 = CARTESIAN_POINT ( 'NONE', ( -10.98574357684217900, 61.58004100757903400, -28.24987021275288500 ) ) ; +#17666 = CARTESIAN_POINT ( 'NONE', ( 16.94821498770164700, 95.49734411194218400, -27.92954451900696000 ) ) ; +#17667 = ORIENTED_EDGE ( 'NONE', *, *, #51306, .T. ) ; +#17668 = PLANE ( 'NONE', #52297 ) ; +#17669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17670 = ADVANCED_FACE ( 'NONE', ( #12517 ), #56268, .F. ) ; +#17671 = CIRCLE ( 'NONE', #35764, 10.00000000000009200 ) ; +#17672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17673 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17674 = ADVANCED_FACE ( 'NONE', ( #58229 ), #23201, .T. ) ; +#17675 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506427500, 31.01912043132477600, -28.30223257055573800 ) ) ; +#17676 = CARTESIAN_POINT ( 'NONE', ( 15.27292969368545400, 65.79999999999982700, -28.53959444491381300 ) ) ; +#17677 = AXIS2_PLACEMENT_3D ( 'NONE', #63771, #75984, #20238 ) ; +#17678 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 32.00000000000001400, -1.205558038030005300 ) ) ; +#17679 = CARTESIAN_POINT ( 'NONE', ( -10.62858178328636400, 60.16749699759768800, -28.25056166218020700 ) ) ; +#17680 = FACE_OUTER_BOUND ( 'NONE', #79081, .T. ) ; +#17681 = ORIENTED_EDGE ( 'NONE', *, *, #58821, .F. ) ; +#17682 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12936, #62439, #13217, #56698 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476258133704500E-007, 0.0002670039420925205600 ), + .UNSPECIFIED. ) ; +#17683 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428533400, 70.07141756547893900, -28.70555803802997700 ) ) ; +#17684 = PLANE ( 'NONE', #69189 ) ; +#17685 = AXIS2_PLACEMENT_3D ( 'NONE', #71991, #16217, #65728 ) ; +#17686 = CARTESIAN_POINT ( 'NONE', ( 1.939071942967055100, 10.00000000000003700, -28.70555803802998100 ) ) ; +#17687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17688 = CARTESIAN_POINT ( 'NONE', ( 5.328426977398265800, 57.14999999999999900, -8.564173859649567800 ) ) ; +#17689 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 41.43650294695131500, -28.30782889147482400 ) ) ; +#17690 = EDGE_CURVE ( 'NONE', #43443, #65591, #39730, .T. ) ; +#17691 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192832700, 54.80000000000001100, -28.70555803802997700 ) ) ; +#17692 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.62753447840889000, -28.38801640354855800 ) ) ; +#17693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17694 = AXIS2_PLACEMENT_3D ( 'NONE', #3368, #47138, #59426 ) ; +#17695 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17696 = EDGE_LOOP ( 'NONE', ( #53388, #4243, #31918 ) ) ; +#17697 = CARTESIAN_POINT ( 'NONE', ( -4.720766503057952900, 70.09951448976266900, -28.63282631410025700 ) ) ; +#17698 = ORIENTED_EDGE ( 'NONE', *, *, #44190, .F. ) ; +#17699 = ORIENTED_EDGE ( 'NONE', *, *, #14158, .T. ) ; +#17700 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#17701 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999990100, 70.79999999999967000, -28.20555803803030800 ) ) ; +#17702 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20528, #57779, #8240, #51742 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728434728022000E-007, 0.0007763347809200476500 ), + .UNSPECIFIED. ) ; +#17703 = CIRCLE ( 'NONE', #11663, 9.500000000000099500 ) ; +#17704 = ORIENTED_EDGE ( 'NONE', *, *, #47098, .F. ) ; +#17705 = ORIENTED_EDGE ( 'NONE', *, *, #66131, .F. ) ; +#17706 = EDGE_CURVE ( 'NONE', #60721, #10288, #41674, .T. ) ; +#17707 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17708 = ORIENTED_EDGE ( 'NONE', *, *, #24416, .F. ) ; +#17709 = CIRCLE ( 'NONE', #20840, 10.00000000000009200 ) ; +#17710 = EDGE_CURVE ( 'NONE', #30748, #22008, #45037, .T. ) ; +#17711 = ORIENTED_EDGE ( 'NONE', *, *, #11281, .T. ) ; +#17712 = ORIENTED_EDGE ( 'NONE', *, *, #57722, .T. ) ; +#17713 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.36203212531321700, -28.38801640354855800 ) ) ; +#17714 = ORIENTED_EDGE ( 'NONE', *, *, #12010, .T. ) ; +#17715 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 0.4999999999999979500, 2.454695999814385600 ) ) ; +#17716 = CYLINDRICAL_SURFACE ( 'NONE', #59339, 10.00000000000000000 ) ; +#17717 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17718 = EDGE_CURVE ( 'NONE', #998, #50621, #30655, .T. ) ; +#17719 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 40.66666666666667900, 5.722645192245505700 ) ) ; +#17720 = EDGE_CURVE ( 'NONE', #5753, #29509, #74793, .T. ) ; +#17721 = EDGE_LOOP ( 'NONE', ( #63019, #26559, #4937, #39620 ) ) ; +#17722 = AXIS2_PLACEMENT_3D ( 'NONE', #46723, #9475, #52992 ) ; +#17723 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868712900, 41.08486215880184700, -28.32821106611849500 ) ) ; +#17724 = CIRCLE ( 'NONE', #75965, 10.50000000000009200 ) ; +#17725 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818070600, 61.65075715145340500, -28.20555803803031100 ) ) ; +#17726 = EDGE_LOOP ( 'NONE', ( #80627, #70422, #50359, #58601 ) ) ; +#17727 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 71.43945992495501700, -28.34042301926918800 ) ) ; +#17728 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17729 = ORIENTED_EDGE ( 'NONE', *, *, #62175, .F. ) ; +#17730 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 5.833333333333356100, -9.205558038030003900 ) ) ; +#17731 = ORIENTED_EDGE ( 'NONE', *, *, #78615, .T. ) ; +#17732 = FACE_OUTER_BOUND ( 'NONE', #57545, .T. ) ; +#17733 = ORIENTED_EDGE ( 'NONE', *, *, #7456, .T. ) ; +#17734 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853689300, 51.25732391202355800, -28.20555803803030800 ) ) ; +#17735 = CIRCLE ( 'NONE', #7035, 10.00000000000009400 ) ; +#17736 = AXIS2_PLACEMENT_3D ( 'NONE', #60631, #23365, #66881 ) ; +#17737 = EDGE_CURVE ( 'NONE', #37057, #79921, #72849, .T. ) ; +#17738 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 31.12753447840886900, -28.38801640354855500 ) ) ; +#17739 = EDGE_CURVE ( 'NONE', #49911, #34020, #8570, .T. ) ; +#17740 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17741 = EDGE_CURVE ( 'NONE', #67246, #29861, #6633, .T. ) ; +#17742 = ADVANCED_FACE ( 'NONE', ( #25147 ), #52341, .F. ) ; +#17743 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540328400, 62.51973550835654700, -28.70555803803005900 ) ) ; +#17744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17745 = CARTESIAN_POINT ( 'NONE', ( -15.11625473641675300, 45.54999999999998300, -28.53994725305377100 ) ) ; +#17746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17747 = AXIS2_PLACEMENT_3D ( 'NONE', #56608, #6839, #13128 ) ; +#17748 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949245900, 28.07379779496241300, -28.70555803802994200 ) ) ; +#17749 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715600, 70.34267608797551900, -28.20555803803014400 ) ) ; +#17750 = CYLINDRICAL_SURFACE ( 'NONE', #10173, 10.00000000000000000 ) ; +#17751 = ORIENTED_EDGE ( 'NONE', *, *, #18067, .T. ) ; +#17752 = ORIENTED_EDGE ( 'NONE', *, *, #22725, .T. ) ; +#17753 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144700, 41.52858243452107000, -28.70555803802997700 ) ) ; +#17754 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105668500, 45.54999999999998300, -28.70555803802996700 ) ) ; +#17755 = AXIS2_PLACEMENT_3D ( 'NONE', #40001, #14987, #8963 ) ; +#17756 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24574, #18313, #55566, #30841 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249058700, 0.0008027336008645596300 ), + .UNSPECIFIED. ) ; +#17757 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#17758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17759 = EDGE_CURVE ( 'NONE', #30313, #40802, #16183, .T. ) ; +#17760 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 22.65857157145701000, -28.20555803802995200 ) ) ; +#17761 = ADVANCED_FACE ( 'NONE', ( #21261 ), #19292, .T. ) ; +#17762 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#17763 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686894100, 80.01994747561587900, -28.24986299608873400 ) ) ; +#17764 = AXIS2_PLACEMENT_3D ( 'NONE', #71049, #15300, #2746 ) ; +#17765 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199500, 60.34267608797601000, -28.20555803802997700 ) ) ; +#17766 = AXIS2_PLACEMENT_3D ( 'NONE', #9282, #52805, #15568 ) ; +#17767 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.43250300240229200, -28.20555803802997700 ) ) ; +#17768 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17770 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218856100, 19.92563948200641700, -28.45080305021058100 ) ) ; +#17771 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 45.55000000000000400, -28.20555803802996700 ) ) ; +#17772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17774 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17776 = ORIENTED_EDGE ( 'NONE', *, *, #37810, .F. ) ; +#17777 = ORIENTED_EDGE ( 'NONE', *, *, #66795, .T. ) ; +#17778 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#17779 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290088600, 31.03732497909459600, -28.41043597897467200 ) ) ; +#17780 = CARTESIAN_POINT ( 'NONE', ( 10.62858178328675700, 90.16749699759755300, -28.25056166218050900 ) ) ; +#17781 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17782 = ADVANCED_FACE ( 'NONE', ( #70869 ), #66991, .F. ) ; +#17783 = CONICAL_SURFACE ( 'NONE', #67883, 10.00000000000009600, 0.7853981633974447300 ) ; +#17784 = AXIS2_PLACEMENT_3D ( 'NONE', #5306, #11307, #48784 ) ; +#17785 = ORIENTED_EDGE ( 'NONE', *, *, #49955, .T. ) ; +#17786 = FACE_OUTER_BOUND ( 'NONE', #2350, .T. ) ; +#17787 = ORIENTED_EDGE ( 'NONE', *, *, #36809, .T. ) ; +#17788 = FACE_OUTER_BOUND ( 'NONE', #78704, .T. ) ; +#17789 = ORIENTED_EDGE ( 'NONE', *, *, #80779, .F. ) ; +#17790 = ORIENTED_EDGE ( 'NONE', *, *, #12887, .F. ) ; +#17791 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 46.66666666666668600, -5.205558038030003100 ) ) ; +#17792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17793 = AXIS2_PLACEMENT_3D ( 'NONE', #51990, #20771, #8489 ) ; +#17794 = CONICAL_SURFACE ( 'NONE', #34812, 10.00000000000009400, 0.7853981633974447300 ) ; +#17795 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17796 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#17797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#17798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39933, #77202, #58698, #21460 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184993900, 0.001517199873936111700 ), + .UNSPECIFIED. ) ; +#17799 = EDGE_CURVE ( 'NONE', #2143, #34038, #1686, .T. ) ; +#17800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17801 = ORIENTED_EDGE ( 'NONE', *, *, #74344, .T. ) ; +#17802 = CONICAL_SURFACE ( 'NONE', #26452, 10.00000000000009200, 0.7853981633974447300 ) ; +#17803 = AXIS2_PLACEMENT_3D ( 'NONE', #58946, #65248, #15441 ) ; +#17804 = VERTEX_POINT ( 'NONE', #75897 ) ; +#17805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74351, #30826, #6061, #49528 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278509800, 0.0005468822770170225500 ), + .UNSPECIFIED. ) ; +#17807 = ORIENTED_EDGE ( 'NONE', *, *, #62699, .F. ) ; +#17808 = ORIENTED_EDGE ( 'NONE', *, *, #67382, .T. ) ; +#17809 = FACE_OUTER_BOUND ( 'NONE', #68087, .T. ) ; +#17810 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999300, 15.60073525436785500, -28.70555803802992800 ) ) ; +#17811 = ORIENTED_EDGE ( 'NONE', *, *, #60386, .T. ) ; +#17812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29282, #66498, #79029, #41707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202225457400E-007, 0.0008724366121407790200 ), + .UNSPECIFIED. ) ; +#17813 = FACE_OUTER_BOUND ( 'NONE', #37991, .T. ) ; +#17814 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17816 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17818 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17819 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 18.00000000000000700, -1.205558038030002800 ) ) ; +#17821 = ORIENTED_EDGE ( 'NONE', *, *, #33304, .T. ) ; +#17820 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #58322, #21082, #77083, #39820 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 1.595067276152677200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999509106872246400, 0.9999509106872246400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#17822 = VERTEX_POINT ( 'NONE', #32388 ) ; +#17823 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760500, 10.52620220503713200, -28.70555803802992800 ) ) ; +#17824 = EDGE_CURVE ( 'NONE', #40334, #3064, #68029, .T. ) ; +#17825 = CONICAL_SURFACE ( 'NONE', #6457, 10.00000000000009200, 0.7853981633974447300 ) ; +#17826 = ORIENTED_EDGE ( 'NONE', *, *, #74650, .T. ) ; +#17827 = FACE_OUTER_BOUND ( 'NONE', #22335, .T. ) ; +#17828 = EDGE_CURVE ( 'NONE', #24293, #35283, #53571, .T. ) ; +#17829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17830 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#17831 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868700700, 81.58005252438361800, -28.24986299608883700 ) ) ; +#17832 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17833 = EDGE_CURVE ( 'NONE', #3836, #49871, #39078, .T. ) ; +#17834 = ADVANCED_FACE ( 'NONE', ( #68918 ), #33883, .F. ) ; +#17835 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#17836 = EDGE_CURVE ( 'NONE', #67444, #58803, #24650, .T. ) ; +#17837 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551024700, 49.50000000000000000, -7.061964498581026800 ) ) ; +#17838 = AXIS2_PLACEMENT_3D ( 'NONE', #53175, #15931, #59458 ) ; +#17839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17840 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 52.50000000000001400, 2.454695999814385600 ) ) ; +#17841 = EDGE_CURVE ( 'NONE', #25931, #78730, #50377, .T. ) ; +#17842 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 23.59761904761919400, -28.70555803802994200 ) ) ; +#17843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17844 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999925400, 10.46823913367206800, -28.70555803802994200 ) ) ; +#17845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30266, #23999, #11752, #55234 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258838039600E-007, 0.0004559721492010436800 ), + .UNSPECIFIED. ) ; +#17846 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 30.96868088498121800, -28.51286550264512000 ) ) ; +#17847 = EDGE_LOOP ( 'NONE', ( #31224, #36980, #27102 ) ) ; +#17848 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.43250300240228500, -28.20555803802997700 ) ) ; +#17849 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17850 = ADVANCED_FACE ( 'NONE', ( #4685 ), #65059, .F. ) ; +#17851 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.87705528805140900, -28.20555803802994200 ) ) ; +#17852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17853 = EDGE_CURVE ( 'NONE', #72504, #32406, #771, .T. ) ; +#17854 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844499400, 55.46616414991842700, -28.37247596307075500 ) ) ; +#17855 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54179, #10414, #78966, #16939, #60471, #23190, #66710, #29489 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.589900327696125400E-017, 0.001725689008353485700, 0.002588533512530220200, 0.003451378016706954100 ), + .UNSPECIFIED. ) ; +#17856 = EDGE_CURVE ( 'NONE', #8438, #80699, #10187, .T. ) ; +#17857 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818070600, 61.65075715145340500, -28.20555803803031100 ) ) ; +#17858 = EDGE_CURVE ( 'NONE', #59550, #33868, #54325, .T. ) ; +#17859 = CIRCLE ( 'NONE', #72551, 10.00000000000009200 ) ; +#17860 = ORIENTED_EDGE ( 'NONE', *, *, #55331, .T. ) ; +#17861 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17862 = CIRCLE ( 'NONE', #34686, 10.00000000000009200 ) ; +#17863 = ORIENTED_EDGE ( 'NONE', *, *, #2197, .T. ) ; +#17864 = AXIS2_PLACEMENT_3D ( 'NONE', #7472, #20021, #63548 ) ; +#17865 = ADVANCED_FACE ( 'NONE', ( #37764 ), #79632, .F. ) ; +#17866 = ORIENTED_EDGE ( 'NONE', *, *, #60615, .T. ) ; +#17867 = FACE_OUTER_BOUND ( 'NONE', #49760, .T. ) ; +#17869 = ORIENTED_EDGE ( 'NONE', *, *, #11493, .T. ) ; +#17868 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17870 = EDGE_LOOP ( 'NONE', ( #66081, #24723, #60680, #71081, #54414 ) ) ; +#17871 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#17872 = AXIS2_PLACEMENT_3D ( 'NONE', #49276, #12062, #55557 ) ; +#17873 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17874 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.86203212531320300, -28.38801640354855800 ) ) ; +#17875 = ADVANCED_FACE ( 'NONE', ( #31939 ), #21241, .T. ) ; +#17876 = CONICAL_SURFACE ( 'NONE', #7574, 10.50000000000009600, 0.7853981633974482800 ) ; +#17877 = ORIENTED_EDGE ( 'NONE', *, *, #77633, .T. ) ; +#17878 = CIRCLE ( 'NONE', #12862, 10.00000000000009200 ) ; +#17879 = ORIENTED_EDGE ( 'NONE', *, *, #14842, .F. ) ; +#17880 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 58.83333333333335000, -12.20555803803000600 ) ) ; +#17881 = ORIENTED_EDGE ( 'NONE', *, *, #34540, .T. ) ; +#17882 = EDGE_LOOP ( 'NONE', ( #38451, #36070, #14349, #19561 ) ) ; +#17883 = CARTESIAN_POINT ( 'NONE', ( 9.904737509656014200, 17.92298334620663500, -28.20555803803009800 ) ) ; +#17884 = VERTEX_POINT ( 'NONE', #77245 ) ; +#17885 = CONICAL_SURFACE ( 'NONE', #59610, 10.00000000000009400, 0.7853981633974447300 ) ; +#17886 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 24.00000000000000700, 3.794441961969998300 ) ) ; +#17887 = AXIS2_PLACEMENT_3D ( 'NONE', #24223, #67731, #30492 ) ; +#17888 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274707600, 35.05000000000000400, -28.20555803802995200 ) ) ; +#17889 = ORIENTED_EDGE ( 'NONE', *, *, #60732, .F. ) ; +#17890 = ORIENTED_EDGE ( 'NONE', *, *, #51613, .T. ) ; +#17891 = AXIS2_PLACEMENT_3D ( 'NONE', #10491, #60008, #66520 ) ; +#17892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17893 = EDGE_LOOP ( 'NONE', ( #12976, #32244, #20269, #61252 ) ) ; +#17894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17895 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378045200, 50.77483928597535400, -28.57108397021914600 ) ) ; +#17896 = EDGE_CURVE ( 'NONE', #57837, #64447, #76485, .T. ) ; +#17897 = FACE_OUTER_BOUND ( 'NONE', #68963, .T. ) ; +#17898 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 26.33333333333334300, -10.73183747965883100 ) ) ; +#17899 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #43757, #6527 ) ; +#17900 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17903 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 79.41684396980716100, -28.70555803802999500 ) ) ; +#17904 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609174500, 13.41466791010185500, -28.53910738522645100 ) ) ; +#17905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17906 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9950, #72255, #78518, #41220 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.237823150467865600E-005, 0.0003590896259719823600 ), + .UNSPECIFIED. ) ; +#17907 = CARTESIAN_POINT ( 'NONE', ( -8.116254736416753000, 35.04999999999997600, -28.53994725305375700 ) ) ; +#17908 = AXIS2_PLACEMENT_3D ( 'NONE', #47914, #10697, #54189 ) ; +#17909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17910 = CIRCLE ( 'NONE', #79997, 10.00000000000009200 ) ; +#17911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17912 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#17913 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.22294471194858900, -28.20555803802995200 ) ) ; +#17914 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#17915 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819203500, 71.65075715145309200, -28.20555803802997700 ) ) ; +#17917 = ORIENTED_EDGE ( 'NONE', *, *, #59986, .F. ) ; +#17916 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567171400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#17918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#17919 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034485600, 10.17701665379206900, -28.20555803803018300 ) ) ; +#17920 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25685, #62946, #19691, #63210 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409681000 ), + .UNSPECIFIED. ) ; +#17921 = ORIENTED_EDGE ( 'NONE', *, *, #69502, .T. ) ; +#17922 = ADVANCED_FACE ( 'NONE', ( #35841 ), #30026, .F. ) ; +#17923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17924 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609424100, 51.46283204837338600, -28.48697406221667800 ) ) ; +#17925 = CONICAL_SURFACE ( 'NONE', #52120, 10.50000000000009400, 0.7853981633974500600 ) ; +#17926 = EDGE_LOOP ( 'NONE', ( #65657, #59364, #40790 ) ) ; +#17927 = CONICAL_SURFACE ( 'NONE', #26820, 10.00000000000009400, 0.7853981633974447300 ) ; +#17929 = EDGE_CURVE ( 'NONE', #60356, #79769, #62058, .T. ) ; +#17928 = ORIENTED_EDGE ( 'NONE', *, *, #35117, .F. ) ; +#17930 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 29.83333333333333900, 0.9380355014189731800 ) ) ; +#17931 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17932 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627436000, 47.43535825203925100, -28.53896444442201700 ) ) ; +#17933 = EDGE_CURVE ( 'NONE', #11576, #39956, #63089, .T. ) ; +#17934 = FACE_OUTER_BOUND ( 'NONE', #20431, .T. ) ; +#17935 = CIRCLE ( 'NONE', #41902, 10.00000000000009200 ) ; +#17936 = ORIENTED_EDGE ( 'NONE', *, *, #42147, .T. ) ; +#17937 = ORIENTED_EDGE ( 'NONE', *, *, #75503, .F. ) ; +#17938 = VERTEX_POINT ( 'NONE', #15237 ) ; +#17939 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17940 = ADVANCED_FACE ( 'NONE', ( #46483 ), #46464, .T. ) ; +#17941 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507520300, 18.70543520232828200, -28.70555803802992800 ) ) ; +#17942 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769033300, 29.28860447109613200, -28.53900456328625500 ) ) ; +#17943 = CARTESIAN_POINT ( 'NONE', ( 7.970144383672120200, 57.15000000000002700, -3.470941190910046700 ) ) ; +#17944 = EDGE_CURVE ( 'NONE', #34969, #49679, #47542, .T. ) ; +#17945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56175, #12702, #25189, #68702 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925603910700E-007, 0.0004431156063177158700 ), + .UNSPECIFIED. ) ; +#17946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17947 = CIRCLE ( 'NONE', #37244, 10.00000000000009600 ) ; +#17948 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17949 = ORIENTED_EDGE ( 'NONE', *, *, #63823, .T. ) ; +#17950 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#17951 = EDGE_CURVE ( 'NONE', #28981, #58003, #33121, .T. ) ; +#17952 = FACE_OUTER_BOUND ( 'NONE', #38329, .T. ) ; +#17953 = CARTESIAN_POINT ( 'NONE', ( -3.756937565509200500, 61.43482212736793700, -28.29548618595819700 ) ) ; +#17954 = EDGE_CURVE ( 'NONE', #18097, #56298, #17344, .T. ) ; +#17955 = ORIENTED_EDGE ( 'NONE', *, *, #58682, .T. ) ; +#17956 = ADVANCED_FACE ( 'NONE', ( #48449 ), #28072, .F. ) ; +#17957 = VERTEX_POINT ( 'NONE', #48115 ) ; +#17958 = EDGE_LOOP ( 'NONE', ( #45271, #2409, #7466 ) ) ; +#17959 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428641300, 28.57141756547896300, -28.70555803802994200 ) ) ; +#17960 = ORIENTED_EDGE ( 'NONE', *, *, #39610, .T. ) ; +#17961 = ORIENTED_EDGE ( 'NONE', *, *, #57622, .F. ) ; +#17962 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 83.20037755566822600, -28.53664883431611400 ) ) ; +#17963 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .F. ) ; +#17964 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#17965 = FACE_OUTER_BOUND ( 'NONE', #27214, .T. ) ; +#17966 = AXIS2_PLACEMENT_3D ( 'NONE', #27759, #71250, #33987 ) ; +#17967 = EDGE_CURVE ( 'NONE', #47599, #10656, #61153, .T. ) ; +#17968 = EDGE_CURVE ( 'NONE', #20847, #62561, #15397, .T. ) ; +#17969 = EDGE_CURVE ( 'NONE', #23088, #68516, #18664, .T. ) ; +#17970 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#17971 = ADVANCED_FACE ( 'NONE', ( #2711 ), #42607, .F. ) ; +#17972 = EDGE_LOOP ( 'NONE', ( #12044, #66900, #61745, #68806, #47108 ) ) ; +#17973 = AXIS2_PLACEMENT_3D ( 'NONE', #54510, #17257, #60784 ) ; +#17974 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#17975 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .T. ) ; +#17976 = CONICAL_SURFACE ( 'NONE', #24187, 10.00000000000009400, 0.7853981633974447300 ) ; +#17977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#17978 = AXIS2_PLACEMENT_3D ( 'NONE', #44922, #7678, #51167 ) ; +#17979 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, -1.666666666666656500, -3.705558038030004400 ) ) ; +#17980 = AXIS2_PLACEMENT_3D ( 'NONE', #49462, #74528, #62029 ) ; +#17981 = AXIS2_PLACEMENT_3D ( 'NONE', #68623, #18839, #74877 ) ; +#17982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5150, #42388, #17679, #61201 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185000000, 0.001517199873936119300 ), + .UNSPECIFIED. ) ; +#17983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17984 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 38.49999999999996400, -7.061964498581022400 ) ) ; +#17985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#17986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17987 = CIRCLE ( 'NONE', #6910, 10.00000000000009400 ) ; +#17988 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 3.666666666666679400, 5.722645192245505700 ) ) ; +#17989 = ORIENTED_EDGE ( 'NONE', *, *, #79347, .T. ) ; +#17990 = CONICAL_SURFACE ( 'NONE', #13518, 10.50000000000009600, 0.7853981633974500600 ) ; +#17991 = AXIS2_PLACEMENT_3D ( 'NONE', #54297, #35815, #72816 ) ; +#17992 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#17993 = EDGE_CURVE ( 'NONE', #1549, #40461, #4191, .T. ) ; +#17994 = ORIENTED_EDGE ( 'NONE', *, *, #23702, .F. ) ; +#17995 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#17996 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 90.07141756547889600, -28.70555803802997700 ) ) ; +#17997 = VERTEX_POINT ( 'NONE', #11441 ) ; +#17998 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 16.17143691309412600, -28.36981695106779000 ) ) ; +#17999 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701400, 25.48096581827318700, -28.69431509262337700 ) ) ; +#18000 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47977, #23003, #17015, #60546 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487555950200, 0.001085359101287173500 ), + .UNSPECIFIED. ) ; +#18001 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#18002 = CONICAL_SURFACE ( 'NONE', #69308, 10.00000000000009400, 0.7853981633974447300 ) ; +#18003 = CARTESIAN_POINT ( 'NONE', ( -9.254548258614995900, 18.09617684379258400, -28.64146614751467400 ) ) ; +#18004 = CIRCLE ( 'NONE', #64845, 9.500000000000099500 ) ; +#18005 = VERTEX_POINT ( 'NONE', #79695 ) ; +#18006 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#18007 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 87.92318720225497900, -28.70555803802997700 ) ) ; +#18008 = EDGE_CURVE ( 'NONE', #16691, #12775, #77667, .T. ) ; +#18009 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466629300, 39.83106028708537800, -28.57333386111660200 ) ) ; +#18010 = ORIENTED_EDGE ( 'NONE', *, *, #4353, .T. ) ; +#18011 = FACE_OUTER_BOUND ( 'NONE', #55251, .T. ) ; +#18012 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#18013 = CARTESIAN_POINT ( 'NONE', ( 15.31403449022170100, 45.54999999999998300, -28.37321477197630100 ) ) ; +#18014 = AXIS2_PLACEMENT_3D ( 'NONE', #40606, #3344, #46845 ) ; +#18015 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 61.99560977511664800, -28.70555803802997700 ) ) ; +#18016 = ORIENTED_EDGE ( 'NONE', *, *, #41087, .T. ) ; +#18017 = ORIENTED_EDGE ( 'NONE', *, *, #6608, .F. ) ; +#18018 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#18019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16690, #53937, #66468, #29252 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572900300, 0.0008043487657983929900 ), + .UNSPECIFIED. ) ; +#18020 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18021 = CARTESIAN_POINT ( 'NONE', ( -1.466819876342326400, 65.79999999999982700, -28.37307693585076900 ) ) ; +#18022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18023 = FACE_OUTER_BOUND ( 'NONE', #37776, .T. ) ; +#18024 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18025 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374509100, 40.55638278624888200, -28.44857805373787600 ) ) ; +#18026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#18027 = ORIENTED_EDGE ( 'NONE', *, *, #33199, .T. ) ; +#18028 = AXIS2_PLACEMENT_3D ( 'NONE', #32473, #75990, #38692 ) ; +#18029 = CONICAL_SURFACE ( 'NONE', #40354, 10.50000000000009600, 0.7853981633974500600 ) ; +#18030 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#18031 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013900, 81.76337688193822800, -28.37223523914899600 ) ) ; +#18032 = ORIENTED_EDGE ( 'NONE', *, *, #59664, .F. ) ; +#18033 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18034 = ORIENTED_EDGE ( 'NONE', *, *, #13604, .F. ) ; +#18035 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37966, #56477, #50456, #13261 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794049486000E-007, 0.0009376791149930087900 ), + .UNSPECIFIED. ) ; +#18036 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844493900, 85.79999999999998300, -28.20555803802997700 ) ) ; +#18037 = EDGE_LOOP ( 'NONE', ( #70995, #52403, #74790, #15768 ) ) ; +#18038 = CARTESIAN_POINT ( 'NONE', ( -16.52197549498848200, 49.62306210240189600, -28.54786661478399500 ) ) ; +#18039 = ORIENTED_EDGE ( 'NONE', *, *, #16200, .F. ) ; +#18040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18041 = CONICAL_SURFACE ( 'NONE', #51556, 10.50000000000009600, 0.7853981633974500600 ) ; +#18042 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 60.10252595950246500, -28.26641963845876000 ) ) ; +#18043 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#18044 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18045 = EDGE_LOOP ( 'NONE', ( #20745, #79863, #19465, #7465, #35981, #69209, #10783, #16419 ) ) ; +#18046 = AXIS2_PLACEMENT_3D ( 'NONE', #54511, #17259, #60787 ) ; +#18047 = EDGE_LOOP ( 'NONE', ( #5057, #47682, #34727, #80777 ) ) ; +#18048 = FACE_OUTER_BOUND ( 'NONE', #74635, .T. ) ; +#18049 = EDGE_CURVE ( 'NONE', #30989, #66062, #70496, .T. ) ; +#18050 = VERTEX_POINT ( 'NONE', #17692 ) ; +#18051 = ADVANCED_FACE ( 'NONE', ( #75701 ), #73787, .F. ) ; +#18052 = CIRCLE ( 'NONE', #41325, 10.00000000000009200 ) ; +#18053 = ADVANCED_FACE ( 'NONE', ( #11509 ), #40662, .F. ) ; +#18054 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 44.49999999999999300, 4.650848422521012700 ) ) ; +#18055 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18056 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 63.67681279774500800, -28.70555803802997700 ) ) ; +#18057 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492433100, 39.70543520232828900, -28.70555803802995200 ) ) ; +#18058 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 61.43945992495533700, -28.34042301926885800 ) ) ; +#18059 = ADVANCED_FACE ( 'NONE', ( #9525 ), #73992, .T. ) ; +#18060 = EDGE_CURVE ( 'NONE', #47696, #76771, #56043, .T. ) ; +#18061 = CONICAL_SURFACE ( 'NONE', #33973, 10.00000000000009200, 0.7853981633974447300 ) ; +#18062 = CARTESIAN_POINT ( 'NONE', ( -1.851846210996308100, 85.79999999999984100, -28.37148172714587700 ) ) ; +#18063 = EDGE_LOOP ( 'NONE', ( #6684, #74985, #36714 ) ) ; +#18064 = CIRCLE ( 'NONE', #18148, 9.500000000000097700 ) ; +#18065 = AXIS2_PLACEMENT_3D ( 'NONE', #18977, #62504, #25251 ) ; +#18066 = EDGE_CURVE ( 'NONE', #2862, #5070, #41588, .T. ) ; +#18067 = EDGE_CURVE ( 'NONE', #78304, #58433, #27144, .T. ) ; +#18068 = EDGE_LOOP ( 'NONE', ( #3303, #43695, #64886, #20523, #45755 ) ) ; +#18069 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844496500, 86.13383585008101300, -28.37247596307048500 ) ) ; +#18070 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39544, #8244, #8519, #52026 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248988800, 0.0008027336008646384500 ), + .UNSPECIFIED. ) ; +#18071 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#18072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18073 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 15.83333333333333700, -4.152999154772353500 ) ) ; +#18074 = EDGE_CURVE ( 'NONE', #53856, #53233, #12696, .T. ) ; +#18075 = CIRCLE ( 'NONE', #18209, 9.500000000000099500 ) ; +#18076 = AXIS2_PLACEMENT_3D ( 'NONE', #5759, #49238, #12026 ) ; +#18077 = CYLINDRICAL_SURFACE ( 'NONE', #44386, 5.000000000000000900 ) ; +#18078 = ORIENTED_EDGE ( 'NONE', *, *, #22832, .F. ) ; +#18079 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#18080 = CONICAL_SURFACE ( 'NONE', #57819, 10.50000000000009600, 0.7853981633974500600 ) ; +#18081 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.23796787468682400, -28.38801640354855100 ) ) ; +#18082 = EDGE_LOOP ( 'NONE', ( #30798, #66503, #2855, #32007 ) ) ; +#18083 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 28.42298334620784700, -28.20555803802994200 ) ) ; +#18084 = CARTESIAN_POINT ( 'NONE', ( 11.03592035693673500, 41.59789380924897300, -28.25343951603330700 ) ) ; +#18085 = ORIENTED_EDGE ( 'NONE', *, *, #33926, .T. ) ; +#18086 = AXIS2_PLACEMENT_3D ( 'NONE', #20416, #63951, #26680 ) ; +#18087 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122236000, 18.57332680091183600, -28.37233769390159600 ) ) ; +#18088 = AXIS2_PLACEMENT_3D ( 'NONE', #29783, #73273, #36008 ) ; +#18089 = FACE_OUTER_BOUND ( 'NONE', #60558, .T. ) ; +#18090 = EDGE_CURVE ( 'NONE', #28682, #14999, #44523, .T. ) ; +#18093 = FACE_OUTER_BOUND ( 'NONE', #30175, .T. ) ; +#18092 = AXIS2_PLACEMENT_3D ( 'NONE', #6526, #252, #50004 ) ; +#18091 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275502600, 47.33333333333335700, 2.794441961969998300 ) ) ; +#18094 = ORIENTED_EDGE ( 'NONE', *, *, #16463, .T. ) ; +#18095 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 80.79999999999998300, -28.45034744217088700 ) ) ; +#18096 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 50.33333333333332900, -3.705558038030004400 ) ) ; +#18097 = VERTEX_POINT ( 'NONE', #12235 ) ; +#18098 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449985700, 61.76337688193823500, -28.37223523914899600 ) ) ; +#18099 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000027200, 82.97376207874987100, -28.70555803803047500 ) ) ; +#18100 = ORIENTED_EDGE ( 'NONE', *, *, #55526, .F. ) ; +#18101 = VERTEX_POINT ( 'NONE', #31008 ) ; +#18102 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743305400, 22.66464174796073300, -28.53896444442197500 ) ) ; +#18103 = VERTEX_POINT ( 'NONE', #55995 ) ; +#18104 = ORIENTED_EDGE ( 'NONE', *, *, #59681, .F. ) ; +#18105 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550040400, 61.76337688193832100, -28.37223523914929000 ) ) ; +#18106 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432791300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#18107 = CIRCLE ( 'NONE', #62086, 10.50000000000009800 ) ; +#18108 = EDGE_CURVE ( 'NONE', #34970, #9694, #79021, .T. ) ; +#18109 = VECTOR ( 'NONE', #55589, 1000.000000000000000 ) ; +#18110 = AXIS2_PLACEMENT_3D ( 'NONE', #58149, #20902, #64442 ) ; +#18111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65391, #52816, #46819, #9574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178875084600E-007, 0.0005050261270277864000 ), + .UNSPECIFIED. ) ; +#18113 = ORIENTED_EDGE ( 'NONE', *, *, #71629, .F. ) ; +#18112 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 61.43945992495518000, -28.34042301926901400 ) ) ; +#18114 = AXIS2_PLACEMENT_3D ( 'NONE', #54474, #11247, #54199 ) ; +#18115 = EDGE_LOOP ( 'NONE', ( #68270, #12607, #47240, #29164 ) ) ; +#18116 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000043300, 88.62623792124928500, -28.70555803803047500 ) ) ; +#18117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18118 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#18119 = ORIENTED_EDGE ( 'NONE', *, *, #26911, .F. ) ; +#18120 = CONICAL_SURFACE ( 'NONE', #16440, 10.00000000000009600, 0.7853981633974482800 ) ; +#18121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18122 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18124 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 44.44999999999999600, 0.0000000000000000000 ) ) ; +#18125 = EDGE_LOOP ( 'NONE', ( #72982, #10923, #64911, #79065 ) ) ; +#18126 = FACE_OUTER_BOUND ( 'NONE', #43509, .T. ) ; +#18127 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20583, #39319, #58103, #20855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671441109500E-007, 0.0007670610367941777100 ), + .UNSPECIFIED. ) ; +#18128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18129 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#18130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18131 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#18132 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18133 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877844400, 20.02667319908790600, -28.37233769390155300 ) ) ; +#18134 = CARTESIAN_POINT ( 'NONE', ( -17.03177803894782700, 60.28233213024647300, -28.25051428653848300 ) ) ; +#18135 = ORIENTED_EDGE ( 'NONE', *, *, #7937, .T. ) ; +#18136 = ADVANCED_FACE ( 'NONE', ( #13461 ), #12509, .T. ) ; +#18137 = AXIS2_PLACEMENT_3D ( 'NONE', #14942, #58459, #21219 ) ; +#18138 = CIRCLE ( 'NONE', #51080, 10.00000000000009200 ) ; +#18140 = ORIENTED_EDGE ( 'NONE', *, *, #73589, .F. ) ; +#18139 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#18141 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 56.66666666666667100, 8.320721403598824400 ) ) ; +#18142 = FACE_OUTER_BOUND ( 'NONE', #58913, .T. ) ; +#18143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18144 = VERTEX_POINT ( 'NONE', #80765 ) ; +#18145 = ADVANCED_FACE ( 'NONE', ( #57220 ), #12784, .T. ) ; +#18146 = CIRCLE ( 'NONE', #70197, 9.500000000000099500 ) ; +#18147 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 21.83333333333333600, -6.205558038030004800 ) ) ; +#18148 = AXIS2_PLACEMENT_3D ( 'NONE', #63956, #26688, #70168 ) ; +#18149 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148346300, 34.09761904761936800, -28.70555803802995200 ) ) ; +#18150 = ORIENTED_EDGE ( 'NONE', *, *, #44473, .F. ) ; +#18151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67078, #23561, #36074, #79588 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572033233300E-007, 0.0007596410370205053900 ), + .UNSPECIFIED. ) ; +#18152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18153 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#18154 = FACE_OUTER_BOUND ( 'NONE', #9972, .T. ) ; +#18155 = CONICAL_SURFACE ( 'NONE', #63180, 10.00000000000009600, 0.7853981633974447300 ) ; +#18156 = EDGE_LOOP ( 'NONE', ( #75859, #65556, #29007, #53837, #23670 ) ) ; +#18157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18158 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 24.16666666666667100, 9.794441961969994300 ) ) ; +#18159 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718938300, 71.13768531620323200, -28.37082013777818500 ) ) ; +#18160 = ORIENTED_EDGE ( 'NONE', *, *, #16407, .F. ) ; +#18161 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18162 = ORIENTED_EDGE ( 'NONE', *, *, #24862, .F. ) ; +#18163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18164 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#18165 = PLANE ( 'NONE', #41420 ) ; +#18166 = ADVANCED_FACE ( 'NONE', ( #7554 ), #22186, .F. ) ; +#18167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29064, #41512, #60310, #23032 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634608920000E-007, 0.0007800579090276786700 ), + .UNSPECIFIED. ) ; +#18168 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 80.13716795162648100, -28.48697406221665300 ) ) ; +#18169 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725307500, 45.55000000000000400, -28.20555803802996700 ) ) ; +#18170 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811160300, 67.05460903980879600, -28.69802137271993600 ) ) ; +#18171 = FACE_OUTER_BOUND ( 'NONE', #17027, .T. ) ; +#18172 = ORIENTED_EDGE ( 'NONE', *, *, #69000, .F. ) ; +#18173 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049499600, 38.69228657120670100, -28.53891855579993500 ) ) ; +#18174 = EDGE_CURVE ( 'NONE', #44558, #39291, #38682, .T. ) ; +#18175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18176 = EDGE_LOOP ( 'NONE', ( #8455, #6853, #15898 ) ) ; +#18177 = ORIENTED_EDGE ( 'NONE', *, *, #39613, .T. ) ; +#18178 = VERTEX_POINT ( 'NONE', #75051 ) ; +#18179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18180 = EDGE_CURVE ( 'NONE', #14133, #891, #64554, .T. ) ; +#18181 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707763700, 28.43589406416698800, -28.68054222049974900 ) ) ; +#18182 = ORIENTED_EDGE ( 'NONE', *, *, #16046, .T. ) ; +#18183 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000000000, 30.40050506338822300, -28.70555803802996700 ) ) ; +#18184 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274727200, 14.36787096422368000, -28.37244029424736900 ) ) ; +#18185 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567000, 51.46283204837339300, -28.48697406221667400 ) ) ; +#18186 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.36762008758049100, -28.26633708900884700 ) ) ; +#18187 = CIRCLE ( 'NONE', #25022, 10.00000000000009200 ) ; +#18188 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#18189 = ORIENTED_EDGE ( 'NONE', *, *, #11066, .F. ) ; +#18190 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769050600, 18.78860447109613200, -28.53900456328624100 ) ) ; +#18191 = EDGE_CURVE ( 'NONE', #69759, #76239, #50019, .T. ) ; +#18192 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 70.69966441803875100, -28.70555803802997700 ) ) ; +#18193 = EDGE_CURVE ( 'NONE', #28145, #59571, #55259, .T. ) ; +#18194 = ORIENTED_EDGE ( 'NONE', *, *, #68921, .F. ) ; +#18195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18196 = CONICAL_SURFACE ( 'NONE', #217, 10.50000000000009600, 0.7853981633974500600 ) ; +#18197 = AXIS2_PLACEMENT_3D ( 'NONE', #73626, #36344, #79886 ) ; +#18198 = ORIENTED_EDGE ( 'NONE', *, *, #65843, .F. ) ; +#18199 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 27.66666666666667100, -5.205558038030003100 ) ) ; +#18200 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18201 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899100200, 28.12363993080119300, -28.38670679782148600 ) ) ; +#18202 = ORIENTED_EDGE ( 'NONE', *, *, #39310, .F. ) ; +#18203 = CONICAL_SURFACE ( 'NONE', #50587, 10.50000000000009600, 0.7853981633974500600 ) ; +#18204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3195, #58963, #28005, #46693 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648685858600E-007, 0.0007596411030280993200 ), + .UNSPECIFIED. ) ; +#18205 = CONICAL_SURFACE ( 'NONE', #68892, 10.50000000000009600, 0.7853981633974482800 ) ; +#18206 = PLANE ( 'NONE', #74279 ) ; +#18207 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150671000, 28.77966528189953300, -28.30868034705248700 ) ) ; +#18208 = CARTESIAN_POINT ( 'NONE', ( 16.45968132316316700, 85.17149633148210300, -28.60315268788654200 ) ) ; +#18209 = AXIS2_PLACEMENT_3D ( 'NONE', #2506, #46021, #8756 ) ; +#18210 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18211 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218858200, 29.17436051799356600, -28.45080305021056700 ) ) ; +#18212 = EDGE_CURVE ( 'NONE', #48521, #4812, #59159, .T. ) ; +#18214 = VERTEX_POINT ( 'NONE', #32062 ) ; +#18213 = EDGE_CURVE ( 'NONE', #32213, #852, #35626, .T. ) ; +#18215 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217475800, 60.16054007504465100, -28.34042301926880800 ) ) ; +#18216 = EDGE_CURVE ( 'NONE', #25223, #78304, #24144, .T. ) ; +#18217 = AXIS2_PLACEMENT_3D ( 'NONE', #40136, #2866, #46352 ) ; +#18218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18219 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715067400, 41.32033471810043300, -28.30868034705251200 ) ) ; +#18220 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851488500, 44.59761904761904800, -28.70555803802996700 ) ) ; +#18221 = AXIS2_PLACEMENT_3D ( 'NONE', #66300, #72558, #22767 ) ; +#18222 = CARTESIAN_POINT ( 'NONE', ( -7.546047120499110900E-014, 54.37738371066721000, -28.70555803802997700 ) ) ; +#18223 = FACE_OUTER_BOUND ( 'NONE', #61909, .T. ) ; +#18224 = ORIENTED_EDGE ( 'NONE', *, *, #74089, .F. ) ; +#18225 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18226 = EDGE_LOOP ( 'NONE', ( #4670, #46065, #6592 ) ) ; +#18227 = AXIS2_PLACEMENT_3D ( 'NONE', #74432, #18396, #68161 ) ; +#18228 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18229 = ORIENTED_EDGE ( 'NONE', *, *, #14044, .T. ) ; +#18230 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 38.63176086632795100, -28.70555803802995200 ) ) ; +#18231 = EDGE_CURVE ( 'NONE', #31088, #28171, #71836, .T. ) ; +#18232 = VERTEX_POINT ( 'NONE', #19826 ) ; +#18233 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 37.62623792124939100, -28.70555803802995200 ) ) ; +#18234 = CIRCLE ( 'NONE', #62366, 9.500000000000099500 ) ; +#18235 = AXIS2_PLACEMENT_3D ( 'NONE', #54855, #17619, #61149 ) ; +#18236 = AXIS2_PLACEMENT_3D ( 'NONE', #33260, #76764, #39499 ) ; +#18237 = ORIENTED_EDGE ( 'NONE', *, *, #49596, .F. ) ; +#18238 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285890300, 77.92318720225479500, -28.70555803803030800 ) ) ; +#18239 = ADVANCED_FACE ( 'NONE', ( #69855 ), #57088, .T. ) ; +#18240 = CIRCLE ( 'NONE', #79222, 10.00000000000009600 ) ; +#18241 = ORIENTED_EDGE ( 'NONE', *, *, #40212, .T. ) ; +#18242 = AXIS2_PLACEMENT_3D ( 'NONE', #38322, #44833, #13637 ) ; +#18243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18244 = EDGE_LOOP ( 'NONE', ( #75145, #19468, #54130, #69064 ) ) ; +#18245 = ADVANCED_FACE ( 'NONE', ( #26107 ), #69849, .T. ) ; +#18246 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, -3.833333333333335300, 0.1341879241256129200 ) ) ; +#18247 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36364, #73645, #55123, #17883 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160288687900, 0.0006028148015509802300 ), + .UNSPECIFIED. ) ; +#18248 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 36.33333333333334300, 2.794441961969998300 ) ) ; +#18249 = CONICAL_SURFACE ( 'NONE', #28149, 10.00000000000009200, 0.7853981633974415100 ) ; +#18250 = CIRCLE ( 'NONE', #57416, 10.00000000000009400 ) ; +#18251 = AXIS2_PLACEMENT_3D ( 'NONE', #58207, #45655, #33461 ) ; +#18252 = ORIENTED_EDGE ( 'NONE', *, *, #70052, .T. ) ; +#18253 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000043100, 70.90050506338806700, -28.70555803803014400 ) ) ; +#18254 = VERTEX_POINT ( 'NONE', #26369 ) ; +#18255 = ADVANCED_FACE ( 'NONE', ( #53314 ), #34845, .T. ) ; +#18256 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 41.52858243452107000, -28.70555803802997700 ) ) ; +#18257 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#18258 = ADVANCED_FACE ( 'NONE', ( #36759 ), #57609, .T. ) ; +#18259 = ORIENTED_EDGE ( 'NONE', *, *, #67309, .T. ) ; +#18260 = ORIENTED_EDGE ( 'NONE', *, *, #68478, .T. ) ; +#18261 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 1.500000000000018700, -7.061964498581022400 ) ) ; +#18262 = VERTEX_POINT ( 'NONE', #76369 ) ; +#18263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18264 = AXIS2_PLACEMENT_3D ( 'NONE', #62510, #25256, #68764 ) ; +#18265 = ORIENTED_EDGE ( 'NONE', *, *, #40678, .T. ) ; +#18266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18267 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472986000, 18.13131911501867700, -28.51286550264547200 ) ) ; +#18268 = ADVANCED_FACE ( 'NONE', ( #3662 ), #65979, .T. ) ; +#18269 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18270 = EDGE_CURVE ( 'NONE', #59944, #359, #1703, .T. ) ; +#18271 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#18272 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18273 = CIRCLE ( 'NONE', #38204, 10.00000000000009400 ) ; +#18274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18275 = EDGE_LOOP ( 'NONE', ( #23594, #61266, #76581, #59870 ) ) ; +#18276 = AXIS2_PLACEMENT_3D ( 'NONE', #68586, #31340, #74845 ) ; +#18277 = EDGE_LOOP ( 'NONE', ( #23351, #40498, #43225, #43160 ) ) ; +#18278 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#18279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18280 = ORIENTED_EDGE ( 'NONE', *, *, #58518, .T. ) ; +#18281 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026327500, 24.55000000000000100, -28.70555803802994200 ) ) ; +#18282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18283 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 70.69966441803892100, -28.70555803802997700 ) ) ; +#18284 = FACE_OUTER_BOUND ( 'NONE', #37058, .T. ) ; +#18285 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 80.34267608797598800, -28.20555803802997700 ) ) ; +#18286 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18287 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535000, 55.79999999999999000, -28.63843632546336000 ) ) ; +#18288 = CARTESIAN_POINT ( 'NONE', ( 2.785741443455758100, 80.07527064970076900, -28.39317435246149700 ) ) ; +#18289 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 30.94069092601378700, -28.35186440610858600 ) ) ; +#18290 = ORIENTED_EDGE ( 'NONE', *, *, #29997, .F. ) ; +#18291 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#18292 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287000, 13.73212903577628400, -28.37244029424738300 ) ) ; +#18293 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455567400, 71.87833896172668300, -28.53892303408230500 ) ) ; +#18294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18296 = EDGE_CURVE ( 'NONE', #29475, #22450, #21164, .T. ) ; +#18297 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528039301000, 73.65857157145680400, -28.37229765499286000 ) ) ; +#18298 = FACE_OUTER_BOUND ( 'NONE', #15474, .T. ) ; +#18299 = ORIENTED_EDGE ( 'NONE', *, *, #43227, .F. ) ; +#18300 = CARTESIAN_POINT ( 'NONE', ( -9.881064473890866400, 90.49763722318499500, -28.32100408376067700 ) ) ; +#18301 = EDGE_CURVE ( 'NONE', #72504, #59068, #20231, .T. ) ; +#18302 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#18303 = ORIENTED_EDGE ( 'NONE', *, *, #61116, .F. ) ; +#18304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13340, #7045, #44275, #19578 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390003743000E-007, 0.0008082646680356907300 ), + .UNSPECIFIED. ) ; +#18305 = CIRCLE ( 'NONE', #67008, 10.00000000000009200 ) ; +#18306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18307 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725288800, 45.86787096422376900, -28.37244029424745100 ) ) ; +#18308 = EDGE_CURVE ( 'NONE', #68330, #64320, #6670, .T. ) ; +#18309 = EDGE_CURVE ( 'NONE', #7275, #35058, #73021, .T. ) ; +#18310 = AXIS2_PLACEMENT_3D ( 'NONE', #12262, #55745, #18505 ) ; +#18311 = FACE_OUTER_BOUND ( 'NONE', #37504, .T. ) ; +#18312 = VERTEX_POINT ( 'NONE', #45876 ) ; +#18313 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477735800, 30.71410430764719700, -28.27354076558354700 ) ) ; +#18314 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 42.33333333333334300, -8.133761268305512700 ) ) ; +#18315 = ORIENTED_EDGE ( 'NONE', *, *, #20194, .F. ) ; +#18316 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#18317 = AXIS2_PLACEMENT_3D ( 'NONE', #39436, #2166, #45654 ) ; +#18318 = EDGE_CURVE ( 'NONE', #59492, #29955, #67921, .T. ) ; +#18319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18320 = EDGE_CURVE ( 'NONE', #57257, #9151, #51321, .T. ) ; +#18321 = EDGE_CURVE ( 'NONE', #60514, #35462, #5633, .T. ) ; +#18322 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999969400, 41.96823913367205000, -28.70555803802997700 ) ) ; +#18323 = ADVANCED_FACE ( 'NONE', ( #18284 ), #30935, .T. ) ; +#18324 = CIRCLE ( 'NONE', #31654, 10.00000000000009200 ) ; +#18325 = CIRCLE ( 'NONE', #24547, 9.500000000000095900 ) ; +#18326 = ORIENTED_EDGE ( 'NONE', *, *, #55721, .T. ) ; +#18327 = ORIENTED_EDGE ( 'NONE', *, *, #40459, .T. ) ; +#18328 = AXIS2_PLACEMENT_3D ( 'NONE', #41893, #4638, #48131 ) ; +#18329 = EDGE_LOOP ( 'NONE', ( #10439, #69528, #55711, #55656, #12311 ) ) ; +#18330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18331 = ORIENTED_EDGE ( 'NONE', *, *, #6779, .F. ) ; +#18332 = ORIENTED_EDGE ( 'NONE', *, *, #74567, .F. ) ; +#18333 = ORIENTED_EDGE ( 'NONE', *, *, #14022, .T. ) ; +#18334 = VERTEX_POINT ( 'NONE', #64979 ) ; +#18335 = EDGE_CURVE ( 'NONE', #18232, #18855, #64037, .T. ) ; +#18336 = ADVANCED_FACE ( 'NONE', ( #32861 ), #62081, .T. ) ; +#18337 = AXIS2_PLACEMENT_3D ( 'NONE', #29532, #73030, #35755 ) ; +#18338 = AXIS2_PLACEMENT_3D ( 'NONE', #47771, #10544, #54036 ) ; +#18339 = ORIENTED_EDGE ( 'NONE', *, *, #8499, .F. ) ; +#18340 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18341 = CARTESIAN_POINT ( 'NONE', ( -1.645813086125114300, 56.46717019299479300, -28.53914313452749200 ) ) ; +#18342 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#18343 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#18344 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 13.66666666666667500, 4.294441961969993400 ) ) ; +#18345 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#18346 = CIRCLE ( 'NONE', #12601, 9.500000000000097700 ) ; +#18347 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998600, 18.24722181384563800, -28.70555803802997400 ) ) ; +#18348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18349 = ORIENTED_EDGE ( 'NONE', *, *, #18090, .F. ) ; +#18350 = ADVANCED_FACE ( 'NONE', ( #14376 ), #29027, .F. ) ; +#18351 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58741, #15233, #71257, #33993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898906500 ), + .UNSPECIFIED. ) ; +#18352 = ORIENTED_EDGE ( 'NONE', *, *, #27042, .T. ) ; +#18353 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#18354 = ORIENTED_EDGE ( 'NONE', *, *, #60610, .T. ) ; +#18355 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825238600, 61.43945992495532900, -28.34042301926881200 ) ) ; +#18356 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#18357 = CARTESIAN_POINT ( 'NONE', ( -8.272691540716723000, 85.79999999999998300, -28.53979898350160100 ) ) ; +#18358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37139, #80680, #68436, #31194 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251667600, 0.003631405919786738000 ), + .UNSPECIFIED. ) ; +#18359 = CIRCLE ( 'NONE', #24009, 10.00000000000009200 ) ; +#18360 = AXIS2_PLACEMENT_3D ( 'NONE', #78447, #41160, #3889 ) ; +#18361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18362 = ORIENTED_EDGE ( 'NONE', *, *, #78919, .T. ) ; +#18363 = ADVANCED_FACE ( 'NONE', ( #80565 ), #21447, .T. ) ; +#18364 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2885, #40147, #9121, #52651 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794164099100E-007, 0.0009376791149930074900 ), + .UNSPECIFIED. ) ; +#18365 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 45.16666666666667100, -3.349151577478988200 ) ) ; +#18366 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701882600, 55.80000000000001100, -28.70555803802997700 ) ) ; +#18367 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.47246552159109000, -28.38801640354855500 ) ) ; +#18368 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 48.16666666666667900, 0.1341879241256129200 ) ) ; +#18369 = FACE_OUTER_BOUND ( 'NONE', #43237, .T. ) ; +#18370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18371 = ORIENTED_EDGE ( 'NONE', *, *, #6382, .T. ) ; +#18372 = EDGE_CURVE ( 'NONE', #2887, #74917, #58540, .T. ) ; +#18373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18374 = AXIS2_PLACEMENT_3D ( 'NONE', #29290, #72767, #35509 ) ; +#18375 = EDGE_LOOP ( 'NONE', ( #31802, #12881, #21436 ) ) ; +#18376 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18377 = EDGE_LOOP ( 'NONE', ( #13141, #3873, #26261 ) ) ; +#18378 = DIRECTION ( 'NONE', ( -3.965082230804130200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18380 = ADVANCED_FACE ( 'NONE', ( #45459 ), #60136, .F. ) ; +#18381 = CARTESIAN_POINT ( 'NONE', ( -3.757024425534403200, 70.16517473503391500, -28.29551658696701500 ) ) ; +#18382 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116453400, 9.894351187922350000, -28.41114655922297800 ) ) ; +#18383 = AXIS2_PLACEMENT_3D ( 'NONE', #5763, #74320, #43009 ) ; +#18384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18385 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.43250300240229600, -28.20555803802995200 ) ) ; +#18386 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75612, #13894, #32641, #76147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799646171300E-007, 0.0005050252131284576800 ), + .UNSPECIFIED. ) ; +#18387 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#18388 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153682400, 70.79999999999998300, -28.55171188418376000 ) ) ; +#18389 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041900, 78.17143691309398400, -28.36981695106829800 ) ) ; +#18390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18391 = AXIS2_PLACEMENT_3D ( 'NONE', #43165, #5935, #49402 ) ; +#18392 = FACE_OUTER_BOUND ( 'NONE', #61312, .T. ) ; +#18393 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280409400, 83.65857157145700300, -28.37229765499284500 ) ) ; +#18394 = CONICAL_SURFACE ( 'NONE', #28648, 10.00000000000009200, 0.7853981633974447300 ) ; +#18395 = ORIENTED_EDGE ( 'NONE', *, *, #76209, .T. ) ; +#18396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18397 = ORIENTED_EDGE ( 'NONE', *, *, #60162, .T. ) ; +#18398 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#18399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18400 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 85.79999999999985500, -28.70525300642875200 ) ) ; +#18401 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43322, #80597, #55827, #18599 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711478392300E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#18402 = FACE_OUTER_BOUND ( 'NONE', #30079, .T. ) ; +#18403 = EDGE_LOOP ( 'NONE', ( #58403, #55010, #70628, #73607, #49896 ) ) ; +#18404 = CONICAL_SURFACE ( 'NONE', #25023, 10.50000000000009600, 0.7853981633974500600 ) ; +#18405 = ORIENTED_EDGE ( 'NONE', *, *, #3539, .F. ) ; +#18406 = ORIENTED_EDGE ( 'NONE', *, *, #53197, .T. ) ; +#18407 = EDGE_CURVE ( 'NONE', #9262, #17080, #12438, .T. ) ; +#18408 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.932503002402292200, -28.20555803802994200 ) ) ; +#18409 = ORIENTED_EDGE ( 'NONE', *, *, #49018, .T. ) ; +#18410 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 54.50000000000001400, -9.258116921287651700 ) ) ; +#18411 = CIRCLE ( 'NONE', #7940, 10.00000000000009200 ) ; +#18412 = EDGE_CURVE ( 'NONE', #28597, #56790, #44033, .T. ) ; +#18413 = EDGE_LOOP ( 'NONE', ( #2959, #15481, #26886, #24496, #49543 ) ) ; +#18414 = EDGE_LOOP ( 'NONE', ( #50676, #24410, #53988, #29791 ) ) ; +#18415 = ORIENTED_EDGE ( 'NONE', *, *, #31542, .F. ) ; +#18417 = ORIENTED_EDGE ( 'NONE', *, *, #47964, .F. ) ; +#18416 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783880600, 28.66749699759768800, -28.23966044827352200 ) ) ; +#18418 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 19.66666666666666800, 3.124568980892192800 ) ) ; +#18419 = ORIENTED_EDGE ( 'NONE', *, *, #38640, .T. ) ; +#18420 = EDGE_CURVE ( 'NONE', #34790, #48190, #29647, .T. ) ; +#18421 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#18422 = EDGE_LOOP ( 'NONE', ( #30946, #50055, #49556, #80696 ) ) ; +#18423 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965628600, 17.92298334620783600, -28.20555803802992800 ) ) ; +#18424 = CONICAL_SURFACE ( 'NONE', #52107, 10.50000000000009600, 0.7853981633974500600 ) ; +#18425 = EDGE_CURVE ( 'NONE', #77331, #36984, #15157, .T. ) ; +#18427 = EDGE_CURVE ( 'NONE', #24812, #51529, #47425, .T. ) ; +#18426 = ORIENTED_EDGE ( 'NONE', *, *, #56410, .T. ) ; +#18428 = ORIENTED_EDGE ( 'NONE', *, *, #36293, .F. ) ; +#18429 = CARTESIAN_POINT ( 'NONE', ( 11.11893552610901100, 80.49763722318471100, -28.32100408376105000 ) ) ; +#18430 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#18431 = ORIENTED_EDGE ( 'NONE', *, *, #48778, .T. ) ; +#18432 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 22.00000000000001400, -12.20555803803000200 ) ) ; +#18433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18434 = ORIENTED_EDGE ( 'NONE', *, *, #46158, .T. ) ; +#18435 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195777000, 11.09027028261045100, -28.70555803803030400 ) ) ; +#18436 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.43250300240228500, -28.20555803802997700 ) ) ; +#18437 = VECTOR ( 'NONE', #68082, 1000.000000000000000 ) ; +#18438 = EDGE_CURVE ( 'NONE', #73931, #16645, #681, .T. ) ; +#18439 = EDGE_CURVE ( 'NONE', #7266, #2253, #67015, .T. ) ; +#18440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#18441 = EDGE_CURVE ( 'NONE', #48826, #70876, #52523, .T. ) ; +#18442 = ORIENTED_EDGE ( 'NONE', *, *, #38628, .F. ) ; +#18443 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 26.42318720225497900, -28.70555803802994200 ) ) ; +#18444 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#18445 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042476300, 38.00972971738994500, -28.70555803802995600 ) ) ; +#18446 = AXIS2_PLACEMENT_3D ( 'NONE', #4177, #72474, #10442 ) ; +#18447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18448 = CIRCLE ( 'NONE', #18137, 10.00000000000009200 ) ; +#18449 = ORIENTED_EDGE ( 'NONE', *, *, #46088, .T. ) ; +#18450 = ADVANCED_FACE ( 'NONE', ( #78638 ), #74715, .F. ) ; +#18451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18453 = EDGE_LOOP ( 'NONE', ( #4441, #80390, #18490, #24298 ) ) ; +#18454 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18455 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944360300, 10.29955846777005000, -28.38339015421974000 ) ) ; +#18456 = ADVANCED_FACE ( 'NONE', ( #49378 ), #41607, .T. ) ; +#18457 = AXIS2_PLACEMENT_3D ( 'NONE', #75340, #792, #56565 ) ; +#18458 = AXIS2_PLACEMENT_3D ( 'NONE', #34414, #77929, #40651 ) ; +#18459 = AXIS2_PLACEMENT_3D ( 'NONE', #60335, #23060, #66571 ) ; +#18460 = ADVANCED_FACE ( 'NONE', ( #10480 ), #8488, .T. ) ; +#18461 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 30.93250300240229200, -28.20555803802996700 ) ) ; +#18462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25706, #75189, #50381, #69190 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565734078533500E-007, 0.0006649316450227301100 ), + .UNSPECIFIED. ) ; +#18464 = CARTESIAN_POINT ( 'NONE', ( -10.12596376456285300, 9.632690823624763300, -28.36487527072564800 ) ) ; +#18465 = CIRCLE ( 'NONE', #8174, 10.50000000000009600 ) ; +#18466 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 25.50000000000000000, 4.650848422521012700 ) ) ; +#18467 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#18468 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 64.83849307182666200, -28.68631150211663400 ) ) ; +#18469 = CONICAL_SURFACE ( 'NONE', #4050, 10.50000000000009600, 0.7853981633974500600 ) ; +#18470 = EDGE_LOOP ( 'NONE', ( #42315, #34647, #55957 ) ) ; +#18471 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18472 = AXIS2_PLACEMENT_3D ( 'NONE', #7609, #51097, #13904 ) ; +#18473 = ORIENTED_EDGE ( 'NONE', *, *, #65743, .F. ) ; +#18474 = EDGE_CURVE ( 'NONE', #77263, #27088, #38062, .T. ) ; +#18475 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#18476 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648800, 20.51912043132467300, -28.30223257055579500 ) ) ; +#18477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48548, #5061, #61122, #23859 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925595741100E-007, 0.0004431156063177169000 ), + .UNSPECIFIED. ) ; +#18478 = CONICAL_SURFACE ( 'NONE', #15925, 10.00000000000009200, 0.7853981633974447300 ) ; +#18479 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878500, 60.16749699759768800, -28.23966044827355000 ) ) ; +#18480 = ORIENTED_EDGE ( 'NONE', *, *, #62291, .T. ) ; +#18481 = FACE_OUTER_BOUND ( 'NONE', #70722, .T. ) ; +#18482 = EDGE_LOOP ( 'NONE', ( #44611, #16162, #28699, #61365 ) ) ; +#18483 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174770700, 61.43945992495534400, -28.34042301926882200 ) ) ; +#18484 = EDGE_CURVE ( 'NONE', #4680, #24306, #23647, .T. ) ; +#18485 = CONICAL_SURFACE ( 'NONE', #60060, 10.50000000000009600, 0.7853981633974518300 ) ; +#18486 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17275, #11027, #67049, #29828 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572499802300E-007, 0.0004669842289003682600 ), + .UNSPECIFIED. ) ; +#18487 = ORIENTED_EDGE ( 'NONE', *, *, #2205, .F. ) ; +#18488 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18489 = AXIS2_PLACEMENT_3D ( 'NONE', #487, #31533, #18992 ) ; +#18490 = ORIENTED_EDGE ( 'NONE', *, *, #12445, .T. ) ; +#18491 = ORIENTED_EDGE ( 'NONE', *, *, #67011, .F. ) ; +#18492 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#18493 = ORIENTED_EDGE ( 'NONE', *, *, #74340, .F. ) ; +#18494 = ORIENTED_EDGE ( 'NONE', *, *, #56280, .T. ) ; +#18495 = ORIENTED_EDGE ( 'NONE', *, *, #44555, .F. ) ; +#18496 = EDGE_LOOP ( 'NONE', ( #48088, #67133, #20069, #6247 ) ) ; +#18497 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489640200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#18498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43602, #99, #37341, #6364 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047464469400E-007, 0.0003301033223275600400 ), + .UNSPECIFIED. ) ; +#18500 = CONICAL_SURFACE ( 'NONE', #60979, 10.00000000000009400, 0.7853981633974447300 ) ; +#18501 = AXIS2_PLACEMENT_3D ( 'NONE', #8214, #58016, #45456 ) ; +#18502 = ORIENTED_EDGE ( 'NONE', *, *, #54037, .T. ) ; +#18503 = ORIENTED_EDGE ( 'NONE', *, *, #10683, .T. ) ; +#18504 = CARTESIAN_POINT ( 'NONE', ( 11.11891772579868500, 81.10238820582941300, -28.32098513914505100 ) ) ; +#18505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18506 = ORIENTED_EDGE ( 'NONE', *, *, #4239, .F. ) ; +#18507 = ORIENTED_EDGE ( 'NONE', *, *, #30039, .F. ) ; +#18508 = EDGE_LOOP ( 'NONE', ( #1618, #35608, #13889, #37481, #15844 ) ) ; +#18509 = ORIENTED_EDGE ( 'NONE', *, *, #73300, .T. ) ; +#18510 = CARTESIAN_POINT ( 'NONE', ( -17.31601142792134200, 28.97675710338221900, -28.43415153258098000 ) ) ; +#18511 = FACE_OUTER_BOUND ( 'NONE', #36705, .T. ) ; +#18512 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 69.16666666666665700, -2.545304000185620600 ) ) ; +#18513 = ORIENTED_EDGE ( 'NONE', *, *, #39496, .T. ) ; +#18514 = AXIS2_PLACEMENT_3D ( 'NONE', #19589, #7052, #56844 ) ; +#18515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18516 = ORIENTED_EDGE ( 'NONE', *, *, #51712, .T. ) ; +#18517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18518 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 34.16666666666669300, -3.349151577478988200 ) ) ; +#18519 = CARTESIAN_POINT ( 'NONE', ( -5.533180123657666100, 65.79999999999999700, -28.37307693585060900 ) ) ; +#18520 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#18521 = EDGE_CURVE ( 'NONE', #52770, #1780, #25074, .T. ) ; +#18522 = LINE ( 'NONE', #74421, #35102 ) ; +#18523 = VERTEX_POINT ( 'NONE', #73092 ) ; +#18524 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#18525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18526 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, -0.6666666666666626300, 2.794441961969998300 ) ) ; +#18527 = VERTEX_POINT ( 'NONE', #29343 ) ; +#18528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18529 = ORIENTED_EDGE ( 'NONE', *, *, #23571, .F. ) ; +#18530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18531 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77506, #15228, #46454, #9208 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859863398300E-007, 0.0008759659331885322300 ), + .UNSPECIFIED. ) ; +#18532 = CARTESIAN_POINT ( 'NONE', ( 9.813460021729298400, 6.877501000800541500, -28.20555803802992800 ) ) ; +#18533 = ADVANCED_FACE ( 'NONE', ( #76643 ), #39658, .F. ) ; +#18534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18535 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18536 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471848200, 41.46868088498121800, -28.51286550264512700 ) ) ; +#18537 = EDGE_CURVE ( 'NONE', #49905, #19948, #9132, .T. ) ; +#18539 = EDGE_CURVE ( 'NONE', #59631, #62491, #75487, .T. ) ; +#18538 = CONICAL_SURFACE ( 'NONE', #33345, 10.00000000000009200, 0.7853981633974415100 ) ; +#18540 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 11.70037755566824200, -28.53664883431606500 ) ) ; +#18541 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18542 = ORIENTED_EDGE ( 'NONE', *, *, #3168, .T. ) ; +#18543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18545 = ORIENTED_EDGE ( 'NONE', *, *, #37263, .T. ) ; +#18546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18548 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034451500, 10.17701665379219700, -28.20555803802993500 ) ) ; +#18549 = ADVANCED_FACE ( 'NONE', ( #56193 ), #6569, .T. ) ; +#18550 = CARTESIAN_POINT ( 'NONE', ( 3.639502927797198400, 41.43250300240230600, -28.25438406275899800 ) ) ; +#18551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18552 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609040400, 60.13716795162677200, -28.48697406221666400 ) ) ; +#18553 = AXIS2_PLACEMENT_3D ( 'NONE', #66457, #28970, #22931 ) ; +#18554 = EDGE_CURVE ( 'NONE', #42265, #36426, #23137, .T. ) ; +#18555 = EDGE_CURVE ( 'NONE', #54691, #61057, #43536, .T. ) ; +#18556 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#18557 = EDGE_CURVE ( 'NONE', #11987, #59548, #61052, .T. ) ; +#18558 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.94142842854297000, -28.20555803802995200 ) ) ; +#18559 = CIRCLE ( 'NONE', #62288, 9.500000000000095900 ) ; +#18560 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 58.62623792124938400, -28.70555803802997700 ) ) ; +#18562 = ORIENTED_EDGE ( 'NONE', *, *, #6974, .T. ) ; +#18561 = EDGE_CURVE ( 'NONE', #50525, #2326, #46518, .T. ) ; +#18563 = CARTESIAN_POINT ( 'NONE', ( -5.100117264795669000, 45.55000000000000400, -28.53808257741935300 ) ) ; +#18564 = ORIENTED_EDGE ( 'NONE', *, *, #66231, .F. ) ; +#18565 = AXIS2_PLACEMENT_3D ( 'NONE', #8864, #71181, #77432 ) ; +#18566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18567 = VERTEX_POINT ( 'NONE', #49085 ) ; +#18568 = CIRCLE ( 'NONE', #8882, 10.50000000000009600 ) ; +#18569 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747186300, 41.46868088498121800, -28.51286550264512700 ) ) ; +#18570 = VERTEX_POINT ( 'NONE', #73898 ) ; +#18572 = EDGE_LOOP ( 'NONE', ( #61901, #38375, #63943 ) ) ; +#18571 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#18573 = VERTEX_POINT ( 'NONE', #11877 ) ; +#18574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18575 = EDGE_LOOP ( 'NONE', ( #16140, #4378, #65886, #47584 ) ) ; +#18576 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.66749699759768800, -28.20555803802996700 ) ) ; +#18577 = AXIS2_PLACEMENT_3D ( 'NONE', #23280, #66801, #29569 ) ; +#18578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18580 = AXIS2_PLACEMENT_3D ( 'NONE', #2557, #46075, #8809 ) ; +#18581 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18582 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26706, #57685, #76438, #39167 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932794498500 ), + .UNSPECIFIED. ) ; +#18583 = ADVANCED_FACE ( 'NONE', ( #16344 ), #21186, .F. ) ; +#18584 = ORIENTED_EDGE ( 'NONE', *, *, #51013, .F. ) ; +#18585 = FACE_OUTER_BOUND ( 'NONE', #42656, .T. ) ; +#18586 = ORIENTED_EDGE ( 'NONE', *, *, #69212, .F. ) ; +#18587 = ORIENTED_EDGE ( 'NONE', *, *, #62224, .T. ) ; +#18588 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#18589 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13423, #19664, #75667, #38384 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207925857400E-007, 0.0008724366121409709200 ), + .UNSPECIFIED. ) ; +#18590 = ORIENTED_EDGE ( 'NONE', *, *, #26891, .T. ) ; +#18591 = EDGE_LOOP ( 'NONE', ( #10164, #5544, #64632, #55136 ) ) ; +#18592 = ORIENTED_EDGE ( 'NONE', *, *, #34620, .F. ) ; +#18593 = CONICAL_SURFACE ( 'NONE', #34218, 10.00000000000009200, 0.7853981633974447300 ) ; +#18594 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 40.16666666666668600, 6.794441961969992500 ) ) ; +#18595 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#18596 = AXIS2_PLACEMENT_3D ( 'NONE', #68230, #74498, #37197 ) ; +#18597 = ORIENTED_EDGE ( 'NONE', *, *, #2660, .F. ) ; +#18598 = EDGE_CURVE ( 'NONE', #40802, #44558, #54242, .T. ) ; +#18599 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999996400, 58.62623792124938400, -28.70555803802997700 ) ) ; +#18600 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807149500, 56.79999999999998300, -28.70555803802997700 ) ) ; +#18601 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 41.07757630314204500, -28.53861367218593500 ) ) ; +#18602 = CIRCLE ( 'NONE', #74863, 10.00000000000009200 ) ; +#18604 = ORIENTED_EDGE ( 'NONE', *, *, #80136, .F. ) ; +#18603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18605 = EDGE_CURVE ( 'NONE', #47514, #26549, #70789, .T. ) ; +#18606 = AXIS2_PLACEMENT_3D ( 'NONE', #48667, #54947, #5178 ) ; +#18607 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18608 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48912, #42939, #11966, #55449, #18208, #61749 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659083461100, 0.004114855318166922200 ), + .UNSPECIFIED. ) ; +#18609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18611 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 11.50000000000000500, -9.258116921287651700 ) ) ; +#18612 = AXIS2_PLACEMENT_3D ( 'NONE', #73893, #79874, #36329 ) ; +#18613 = CARTESIAN_POINT ( 'NONE', ( 9.997971278275752400, 9.810914768184737500, -28.25432823872343500 ) ) ; +#18614 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853719100, 61.25732391202397800, -28.20555803802997700 ) ) ; +#18615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18616 = ORIENTED_EDGE ( 'NONE', *, *, #78837, .F. ) ; +#18617 = ORIENTED_EDGE ( 'NONE', *, *, #49465, .F. ) ; +#18618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18619 = CARTESIAN_POINT ( 'NONE', ( 15.42159809000302500, 28.19142961419054000, -28.69910740970346200 ) ) ; +#18620 = EDGE_LOOP ( 'NONE', ( #75011, #5614, #10821, #71897, #1340 ) ) ; +#18621 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18622 = AXIS2_PLACEMENT_3D ( 'NONE', #18894, #62422, #25159 ) ; +#18623 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 73.65857157145660500, -28.20555803803030800 ) ) ; +#18624 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21415, #33900, #52646, #15411 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191440980500E-007, 0.0006649560044144016500 ), + .UNSPECIFIED. ) ; +#18625 = ADVANCED_FACE ( 'NONE', ( #27036 ), #35767, .F. ) ; +#18626 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943310400, 35.04999999999997600, -28.70555803802995200 ) ) ; +#18627 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#18628 = CONICAL_SURFACE ( 'NONE', #47593, 10.00000000000009600, 0.7853981633974482800 ) ; +#18629 = ORIENTED_EDGE ( 'NONE', *, *, #75726, .F. ) ; +#18630 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 83.20037755566822600, -28.53664883431611800 ) ) ; +#18631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18633 = EDGE_CURVE ( 'NONE', #22429, #39696, #32107, .T. ) ; +#18632 = ORIENTED_EDGE ( 'NONE', *, *, #60853, .F. ) ; +#18634 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 46.00000000000000700, -1.205558038030002800 ) ) ; +#18635 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 83.89610994602600200, -28.37519436813181200 ) ) ; +#18636 = FACE_OUTER_BOUND ( 'NONE', #20182, .T. ) ; +#18637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18638 = ORIENTED_EDGE ( 'NONE', *, *, #15786, .F. ) ; +#18639 = ORIENTED_EDGE ( 'NONE', *, *, #7916, .T. ) ; +#18640 = EDGE_LOOP ( 'NONE', ( #58665, #30315, #10784 ) ) ; +#18641 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 57.94142842854297700, -28.20555803802997700 ) ) ; +#18642 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507543700, 21.02620220503760300, -28.70555803802994200 ) ) ; +#18643 = ADVANCED_FACE ( 'NONE', ( #58156 ), #55900, .T. ) ; +#18644 = ORIENTED_EDGE ( 'NONE', *, *, #34271, .T. ) ; +#18645 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#18646 = ORIENTED_EDGE ( 'NONE', *, *, #290, .F. ) ; +#18647 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465442200, 40.60079448659599400, -28.70555803802996700 ) ) ; +#18648 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 51.43945992495533700, -28.34042301926881200 ) ) ; +#18649 = CONICAL_SURFACE ( 'NONE', #66149, 10.00000000000009600, 0.7853981633974482800 ) ; +#18650 = CARTESIAN_POINT ( 'NONE', ( 10.75693756550931100, 81.43482212736761000, -28.29548618595854800 ) ) ; +#18651 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.43250300240228500, -28.20555803802997700 ) ) ; +#18652 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 89.60439022488337500, -28.70555803802997700 ) ) ; +#18653 = PLANE ( 'NONE', #76572 ) ; +#18654 = CARTESIAN_POINT ( 'NONE', ( -1.314034490221629200, 14.05000000000005200, -28.37321477197635000 ) ) ; +#18655 = EDGE_CURVE ( 'NONE', #16929, #76453, #17664, .T. ) ; +#18656 = FACE_OUTER_BOUND ( 'NONE', #22092, .T. ) ; +#18657 = EDGE_LOOP ( 'NONE', ( #21388, #18509, #48027 ) ) ; +#18658 = ADVANCED_FACE ( 'NONE', ( #4618 ), #66913, .F. ) ; +#18659 = ORIENTED_EDGE ( 'NONE', *, *, #21079, .T. ) ; +#18660 = ADVANCED_FACE ( 'NONE', ( #52265 ), #33806, .F. ) ; +#18661 = EDGE_CURVE ( 'NONE', #77804, #77240, #3160, .T. ) ; +#18662 = ORIENTED_EDGE ( 'NONE', *, *, #46888, .F. ) ; +#18663 = ORIENTED_EDGE ( 'NONE', *, *, #19216, .F. ) ; +#18664 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60682, #35914, #54667, #17418 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397389800, 0.001517194977238208200 ), + .UNSPECIFIED. ) ; +#18665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18666 = ORIENTED_EDGE ( 'NONE', *, *, #59543, .T. ) ; +#18667 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576700, 20.67701665379184900, -28.20555803802994200 ) ) ; +#18668 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 39.37705528805139500, -28.20555803802995200 ) ) ; +#18669 = FACE_OUTER_BOUND ( 'NONE', #80582, .T. ) ; +#18670 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900985600, 39.06267502090536700, -28.41043597897459700 ) ) ; +#18671 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#18672 = EDGE_CURVE ( 'NONE', #46628, #70697, #69489, .T. ) ; +#18673 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629000, 38.92298334620784300, -28.20555803802995200 ) ) ; +#18674 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#18675 = ADVANCED_FACE ( 'NONE', ( #19210 ), #68953, .T. ) ; +#18676 = VERTEX_POINT ( 'NONE', #50158 ) ; +#18677 = EDGE_CURVE ( 'NONE', #23277, #23878, #72768, .T. ) ; +#18678 = AXIS2_PLACEMENT_3D ( 'NONE', #49783, #56068, #68318 ) ; +#18679 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004900, 41.43250300240230600, -28.20555803802997700 ) ) ; +#18680 = FACE_OUTER_BOUND ( 'NONE', #49924, .T. ) ; +#18681 = ORIENTED_EDGE ( 'NONE', *, *, #29923, .F. ) ; +#18682 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 52.33333333333334300, 4.294441961970000500 ) ) ; +#18683 = ORIENTED_EDGE ( 'NONE', *, *, #38854, .T. ) ; +#18684 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#18685 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 17.50000000000000000, -4.865812075874393000 ) ) ; +#18686 = AXIS2_PLACEMENT_3D ( 'NONE', #19718, #56987, #32226 ) ; +#18687 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18688 = EDGE_CURVE ( 'NONE', #10693, #7754, #55034, .T. ) ; +#18689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18690 = EDGE_CURVE ( 'NONE', #20363, #21369, #40562, .T. ) ; +#18691 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050758100, 17.57379779496243800, -28.70555803802992800 ) ) ; +#18692 = AXIS2_PLACEMENT_3D ( 'NONE', #36231, #79747, #42455 ) ; +#18693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18694 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671737400, 51.93585231025954800, -28.38420446581291400 ) ) ; +#18695 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534570300, 30.10079448659600100, -28.70555803802995200 ) ) ; +#18696 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 19.83333333333334300, 9.794441961969999600 ) ) ; +#18697 = ORIENTED_EDGE ( 'NONE', *, *, #23552, .T. ) ; +#18698 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900978500, 28.56267502090536700, -28.41043597897459000 ) ) ; +#18699 = ORIENTED_EDGE ( 'NONE', *, *, #60990, .F. ) ; +#18700 = EDGE_CURVE ( 'NONE', #56191, #79210, #26135, .T. ) ; +#18701 = AXIS2_PLACEMENT_3D ( 'NONE', #9801, #65842, #34564 ) ; +#18702 = AXIS2_PLACEMENT_3D ( 'NONE', #14238, #57747, #20499 ) ; +#18703 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.15857157145701000, -28.20555803802994200 ) ) ; +#18704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18705 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55984, #43717, #62535, #25273 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131286985900 ), + .UNSPECIFIED. ) ; +#18706 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18707 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 69.94924284854742800, -28.20555803802997700 ) ) ; +#18708 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18709 = CONICAL_SURFACE ( 'NONE', #43893, 10.00000000000009200, 0.7853981633974447300 ) ; +#18710 = EDGE_LOOP ( 'NONE', ( #30931, #6481, #24783, #21306 ) ) ; +#18711 = CONICAL_SURFACE ( 'NONE', #74362, 10.00000000000009200, 0.7853981633974415100 ) ; +#18712 = ORIENTED_EDGE ( 'NONE', *, *, #4416, .T. ) ; +#18713 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310704100, 80.10230989102886700, -28.61774594594300300 ) ) ; +#18714 = EDGE_LOOP ( 'NONE', ( #64205, #11171, #61058, #13218 ) ) ; +#18715 = CONICAL_SURFACE ( 'NONE', #19771, 10.50000000000009600, 0.7853981633974500600 ) ; +#18716 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18717 = ORIENTED_EDGE ( 'NONE', *, *, #37355, .T. ) ; +#18718 = ORIENTED_EDGE ( 'NONE', *, *, #40935, .F. ) ; +#18719 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 90.34267608797603100, -28.20555803802997700 ) ) ; +#18720 = CARTESIAN_POINT ( 'NONE', ( -10.37141821671362000, 90.16749699759768100, -28.25056166218020300 ) ) ; +#18721 = ORIENTED_EDGE ( 'NONE', *, *, #69770, .F. ) ; +#18722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18723 = ORIENTED_EDGE ( 'NONE', *, *, #75856, .T. ) ; +#18724 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#18725 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285726000, 47.42318720225497200, -28.70555803802996700 ) ) ; +#18726 = CONICAL_SURFACE ( 'NONE', #62438, 10.00000000000009600, 0.7853981633974447300 ) ; +#18727 = ADVANCED_FACE ( 'NONE', ( #2638 ), #48376, .T. ) ; +#18728 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851510700, 23.59761904761906200, -28.70555803802994200 ) ) ; +#18729 = ORIENTED_EDGE ( 'NONE', *, *, #29790, .F. ) ; +#18730 = AXIS2_PLACEMENT_3D ( 'NONE', #63412, #13641, #19881 ) ; +#18731 = CIRCLE ( 'NONE', #19137, 10.00000000000009200 ) ; +#18732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18733 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 23.33333333333335000, -8.133761268305512700 ) ) ; +#18734 = ORIENTED_EDGE ( 'NONE', *, *, #15242, .T. ) ; +#18735 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#18736 = ORIENTED_EDGE ( 'NONE', *, *, #3635, .T. ) ; +#18737 = ORIENTED_EDGE ( 'NONE', *, *, #50897, .T. ) ; +#18738 = ORIENTED_EDGE ( 'NONE', *, *, #79532, .T. ) ; +#18739 = FACE_OUTER_BOUND ( 'NONE', #3741, .T. ) ; +#18740 = EDGE_LOOP ( 'NONE', ( #47035, #33250, #54356, #71857 ) ) ; +#18741 = CONICAL_SURFACE ( 'NONE', #5982, 10.50000000000009600, 0.7853981633974500600 ) ; +#18742 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18743 = ADVANCED_FACE ( 'NONE', ( #50316 ), #15315, .T. ) ; +#18744 = CARTESIAN_POINT ( 'NONE', ( -10.95972745559563500, 9.875620219179431600, -28.30310404364066200 ) ) ; +#18745 = AXIS2_PLACEMENT_3D ( 'NONE', #34107, #40344, #27881 ) ; +#18746 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#18747 = CARTESIAN_POINT ( 'NONE', ( 2.819172343672427000, 9.542716366279774900, -28.36017162544770500 ) ) ; +#18748 = CARTESIAN_POINT ( 'NONE', ( 3.976840323493588500, 41.51912043132477200, -28.30223257055575200 ) ) ; +#18749 = EDGE_CURVE ( 'NONE', #36273, #39394, #11679, .T. ) ; +#18750 = ORIENTED_EDGE ( 'NONE', *, *, #44923, .F. ) ; +#18751 = VERTEX_POINT ( 'NONE', #69753 ) ; +#18752 = CARTESIAN_POINT ( 'NONE', ( 3.737925478928368400E-015, 43.20037755566822600, -28.53664883431611400 ) ) ; +#18753 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007100, 50.02242369685793500, -28.53861367218592400 ) ) ; +#18754 = AXIS2_PLACEMENT_3D ( 'NONE', #28079, #71564, #34305 ) ; +#18755 = CIRCLE ( 'NONE', #54950, 9.500000000000099500 ) ; +#18756 = VERTEX_POINT ( 'NONE', #32495 ) ; +#18757 = ADVANCED_FACE ( 'NONE', ( #37681 ), #63534, .T. ) ; +#18758 = SURFACE_STYLE_FILL_AREA ( #56237 ) ; +#18759 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 38.81066373133501200, -28.53923937255170200 ) ) ; +#18760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45865, #39639, #52117, #14894 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709723500, 0.0006599881756735770600 ), + .UNSPECIFIED. ) ; +#18761 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040303200, 87.94142842854300600, -28.37229765499282100 ) ) ; +#18762 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 36.94142842854297000, -28.20555803802995200 ) ) ; +#18763 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 61.43650294695079600, -28.30782889147504700 ) ) ; +#18764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18765 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378045200, 90.82516071402460500, -28.57108397021912800 ) ) ; +#18766 = ADVANCED_FACE ( 'NONE', ( #31874 ), #46410, .F. ) ; +#18767 = EDGE_CURVE ( 'NONE', #78012, #10841, #77981, .T. ) ; +#18768 = CARTESIAN_POINT ( 'NONE', ( 17.32922790642983600, 60.46872208558260600, -28.43092544535694100 ) ) ; +#18769 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567600, 15.93535825203924700, -28.53896444442194600 ) ) ; +#18770 = EDGE_CURVE ( 'NONE', #55474, #17173, #68854, .T. ) ; +#18771 = VERTEX_POINT ( 'NONE', #63799 ) ; +#18772 = ORIENTED_EDGE ( 'NONE', *, *, #35792, .T. ) ; +#18773 = ADVANCED_FACE ( 'NONE', ( #79554 ), #29957, .T. ) ; +#18774 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 67.00000000000000000, -1.205558038030002800 ) ) ; +#18775 = CARTESIAN_POINT ( 'NONE', ( -5.883745263583230100, 14.04999999999997800, -28.53994725305373200 ) ) ; +#18776 = EDGE_CURVE ( 'NONE', #22629, #21452, #64989, .T. ) ; +#18777 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 32.00000000000001400, -1.205558038030005300 ) ) ; +#18778 = EDGE_CURVE ( 'NONE', #29011, #45253, #63543, .T. ) ; +#18779 = CIRCLE ( 'NONE', #19384, 9.500000000000099500 ) ; +#18780 = ORIENTED_EDGE ( 'NONE', *, *, #54521, .T. ) ; +#18781 = AXIS2_PLACEMENT_3D ( 'NONE', #28202, #71690, #34426 ) ; +#18782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18783 = CIRCLE ( 'NONE', #23236, 9.500000000000099500 ) ; +#18784 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280406100, 87.94142842854294900, -28.37229765499282100 ) ) ; +#18785 = EDGE_LOOP ( 'NONE', ( #62142, #9913, #22909 ) ) ; +#18786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18787 = CIRCLE ( 'NONE', #69947, 10.00000000000009200 ) ; +#18788 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 69.33333333333334300, -6.705558038030005700 ) ) ; +#18789 = EDGE_LOOP ( 'NONE', ( #26169, #3297, #76577, #39474, #11101, #58708 ) ) ; +#18790 = ORIENTED_EDGE ( 'NONE', *, *, #55240, .T. ) ; +#18791 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#18792 = AXIS2_PLACEMENT_3D ( 'NONE', #23288, #48271, #29576 ) ; +#18793 = CIRCLE ( 'NONE', #75421, 10.00000000000009200 ) ; +#18794 = EDGE_CURVE ( 'NONE', #21477, #31899, #63012, .T. ) ; +#18795 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.867620087580473200, -28.26633708900882500 ) ) ; +#18796 = EDGE_CURVE ( 'NONE', #40091, #14994, #13390, .T. ) ; +#18797 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#18798 = EDGE_CURVE ( 'NONE', #28144, #66645, #49006, .T. ) ; +#18799 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42603, #79895, #61420, #24139 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353323316000E-007, 0.0007670609591622627100 ), + .UNSPECIFIED. ) ; +#18800 = CARTESIAN_POINT ( 'NONE', ( -3.040268958506422000, 30.87561462481246700, -28.30309985153375900 ) ) ; +#18801 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 71.43945992495532900, -28.34042301926881200 ) ) ; +#18802 = EDGE_LOOP ( 'NONE', ( #66249, #63075, #40220, #65012 ) ) ; +#18803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18804 = FACE_OUTER_BOUND ( 'NONE', #46726, .T. ) ; +#18805 = ORIENTED_EDGE ( 'NONE', *, *, #78984, .F. ) ; +#18806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18807 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18808 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15452, #15173, #46684, #9442 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.176485775509913800E-016, 0.001492013864176144600 ), + .UNSPECIFIED. ) ; +#18809 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390527000, 61.46283204837340000, -28.48697406221666000 ) ) ; +#18810 = ORIENTED_EDGE ( 'NONE', *, *, #34998, .T. ) ; +#18811 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 90.69949493661175700, -28.70555803802997700 ) ) ; +#18812 = EDGE_LOOP ( 'NONE', ( #7762, #46647, #73934, #71695 ) ) ; +#18813 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003900, 71.23796787468685900, -28.38801640354854800 ) ) ; +#18814 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#18815 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362728100, 57.56528145730234800, -28.66119098264625000 ) ) ; +#18816 = ORIENTED_EDGE ( 'NONE', *, *, #19371, .T. ) ; +#18817 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30044, #73530, #24028, #67537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001020022808752763800, 0.0007606607323828860200 ), + .UNSPECIFIED. ) ; +#18818 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18819 = EDGE_CURVE ( 'NONE', #80558, #39291, #34611, .T. ) ; +#18820 = FACE_OUTER_BOUND ( 'NONE', #5622, .T. ) ; +#18821 = AXIS2_PLACEMENT_3D ( 'NONE', #71227, #33971, #77486 ) ; +#18822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#18823 = AXIS2_PLACEMENT_3D ( 'NONE', #60650, #23375, #66894 ) ; +#18824 = CARTESIAN_POINT ( 'NONE', ( 11.74534273518434600, 10.00380841767817900, -28.64142799534445800 ) ) ; +#18825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56811, #13313, #63079, #25821 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764792089620600E-007, 0.0009376791149927970400 ), + .UNSPECIFIED. ) ; +#18826 = EDGE_LOOP ( 'NONE', ( #46923, #8504, #27725, #43719, #41723, #64115 ) ) ; +#18827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18828 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736718000, 45.54999999999999700, -28.70555803802996700 ) ) ; +#18829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18830 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966100, 41.44069092601379400, -28.35186440610858600 ) ) ; +#18831 = ORIENTED_EDGE ( 'NONE', *, *, #2191, .F. ) ; +#18832 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#18833 = FACE_OUTER_BOUND ( 'NONE', #43830, .T. ) ; +#18834 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 77.22261628933269200, -28.70555803802997700 ) ) ; +#18835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18836 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898060000, 28.88105266879265900, -28.33409528117008900 ) ) ; +#18837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18838 = AXIS2_PLACEMENT_3D ( 'NONE', #75047, #69044, #56529 ) ; +#18839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18840 = AXIS2_PLACEMENT_3D ( 'NONE', #10944, #41928, #17194 ) ; +#18841 = CONICAL_SURFACE ( 'NONE', #6004, 10.50000000000009600, 0.7853981633974500600 ) ; +#18842 = ADVANCED_FACE ( 'NONE', ( #61073 ), #75633, .F. ) ; +#18843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18844 = VERTEX_POINT ( 'NONE', #8787 ) ; +#18845 = ADVANCED_FACE ( 'NONE', ( #702 ), #15075, .T. ) ; +#18846 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 38.00000000000000700, -9.205558038030005700 ) ) ; +#18847 = AXIS2_PLACEMENT_3D ( 'NONE', #73076, #35798, #79325 ) ; +#18848 = ORIENTED_EDGE ( 'NONE', *, *, #45818, .T. ) ; +#18849 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33911, #27682, #64957, #40154 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709140800, 0.0006599881756734669000 ), + .UNSPECIFIED. ) ; +#18850 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 32.47376207875059600, -28.70555803802996700 ) ) ; +#18851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18852 = ORIENTED_EDGE ( 'NONE', *, *, #55002, .F. ) ; +#18853 = ADVANCED_FACE ( 'NONE', ( #11430 ), #26030, .F. ) ; +#18854 = CIRCLE ( 'NONE', #28254, 10.00000000000009600 ) ; +#18855 = VERTEX_POINT ( 'NONE', #40081 ) ; +#18856 = CONICAL_SURFACE ( 'NONE', #58621, 10.00000000000009400, 0.7853981633974447300 ) ; +#18857 = AXIS2_PLACEMENT_3D ( 'NONE', #59119, #21877, #65425 ) ; +#18858 = VERTEX_POINT ( 'NONE', #2809 ) ; +#18859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18860 = VERTEX_POINT ( 'NONE', #46303 ) ; +#18861 = CIRCLE ( 'NONE', #37065, 10.00000000000009200 ) ; +#18862 = EDGE_LOOP ( 'NONE', ( #53692, #8274, #69059 ) ) ; +#18863 = ORIENTED_EDGE ( 'NONE', *, *, #14369, .T. ) ; +#18864 = EDGE_LOOP ( 'NONE', ( #39760, #34862, #21837, #59740 ) ) ; +#18865 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18866 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#18867 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#18868 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260793400, 30.89965687931246300, -28.70555803803001600 ) ) ; +#18869 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 9.333333333333346400, 8.320721403598817300 ) ) ; +#18870 = CONICAL_SURFACE ( 'NONE', #52366, 10.00000000000009600, 0.7853981633974447300 ) ; +#18871 = ORIENTED_EDGE ( 'NONE', *, *, #31443, .F. ) ; +#18872 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#18873 = CIRCLE ( 'NONE', #63377, 10.50000000000009600 ) ; +#18874 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 31.17701665379185600, -28.20555803802995200 ) ) ; +#18875 = EDGE_CURVE ( 'NONE', #16677, #78759, #20139, .T. ) ; +#18876 = ORIENTED_EDGE ( 'NONE', *, *, #60536, .F. ) ; +#18878 = EDGE_CURVE ( 'NONE', #301, #40811, #5662, .T. ) ; +#18877 = VERTEX_POINT ( 'NONE', #71376 ) ; +#18879 = ORIENTED_EDGE ( 'NONE', *, *, #24070, .T. ) ; +#18880 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#18881 = EDGE_LOOP ( 'NONE', ( #64288, #13202, #73542, #79469 ) ) ; +#18882 = CIRCLE ( 'NONE', #40277, 10.50000000000009600 ) ; +#18883 = CARTESIAN_POINT ( 'NONE', ( -10.95972934556082000, 49.72438272935919900, -28.30310183417010000 ) ) ; +#18884 = ORIENTED_EDGE ( 'NONE', *, *, #44837, .F. ) ; +#18885 = EDGE_CURVE ( 'NONE', #14035, #60353, #27996, .T. ) ; +#18886 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#18887 = EDGE_CURVE ( 'NONE', #6854, #60567, #44448, .T. ) ; +#18888 = ORIENTED_EDGE ( 'NONE', *, *, #62938, .F. ) ; +#18889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18890 = ORIENTED_EDGE ( 'NONE', *, *, #67988, .T. ) ; +#18891 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 43.83333333333334300, -2.545304000185615800 ) ) ; +#18892 = EDGE_CURVE ( 'NONE', #76860, #26320, #72012, .T. ) ; +#18893 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#18894 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#18895 = ORIENTED_EDGE ( 'NONE', *, *, #70720, .T. ) ; +#18896 = FACE_OUTER_BOUND ( 'NONE', #32907, .T. ) ; +#18897 = PLANE ( 'NONE', #4777 ) ; +#18898 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#18899 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849322800, 49.77966528189953300, -28.30868034705251500 ) ) ; +#18900 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389083800, 80.49763722318456900, -28.32100408376087600 ) ) ; +#18901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18902 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18903 = AXIS2_PLACEMENT_3D ( 'NONE', #16513, #60046, #22758 ) ; +#18904 = EDGE_CURVE ( 'NONE', #69501, #75725, #57530, .T. ) ; +#18905 = EDGE_CURVE ( 'NONE', #45917, #55877, #59091, .T. ) ; +#18906 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18907 = EDGE_CURVE ( 'NONE', #45946, #60076, #43044, .T. ) ; +#18908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18909 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#18910 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11501, #61283, #5497, #48970 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0006422238262062606700 ), + .UNSPECIFIED. ) ; +#18911 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#18912 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#18913 = DIRECTION ( 'NONE', ( 1.982541115402066600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18914 = AXIS2_PLACEMENT_3D ( 'NONE', #19239, #62791, #25528 ) ; +#18915 = CIRCLE ( 'NONE', #31513, 10.50000000000009600 ) ; +#18916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18917 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929812600, 55.80000000000000400, -28.70555803802997700 ) ) ; +#18918 = CARTESIAN_POINT ( 'NONE', ( 6.761800547196084900, 87.94142842854259400, -28.37229765499300200 ) ) ; +#18919 = ORIENTED_EDGE ( 'NONE', *, *, #66449, .T. ) ; +#18920 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500402100, 71.76337688193847000, -28.37223523914912000 ) ) ; +#18921 = AXIS2_PLACEMENT_3D ( 'NONE', #80768, #6242, #37222 ) ; +#18922 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69012, #19518, #63042, #25786 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279228135637800E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#18923 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#18925 = ORIENTED_EDGE ( 'NONE', *, *, #39344, .T. ) ; +#18924 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285718900, 73.67681279774498600, -28.70555803802997700 ) ) ; +#18926 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783880200, 39.16749699759768800, -28.23966044827353300 ) ) ; +#18927 = ADVANCED_FACE ( 'NONE', ( #42533 ), #24069, .T. ) ; +#18928 = ORIENTED_EDGE ( 'NONE', *, *, #72771, .T. ) ; +#18929 = FACE_OUTER_BOUND ( 'NONE', #34252, .T. ) ; +#18930 = ORIENTED_EDGE ( 'NONE', *, *, #39622, .F. ) ; +#18931 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18932 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 50.16666666666666400, -4.152999154772358800 ) ) ; +#18933 = CIRCLE ( 'NONE', #33387, 10.00000000000009400 ) ; +#18934 = FACE_OUTER_BOUND ( 'NONE', #14602, .T. ) ; +#18935 = ORIENTED_EDGE ( 'NONE', *, *, #66073, .T. ) ; +#18936 = EDGE_LOOP ( 'NONE', ( #53363, #9739, #19155 ) ) ; +#18937 = VERTEX_POINT ( 'NONE', #28714 ) ; +#18938 = ADVANCED_FACE ( 'NONE', ( #40583 ), #71763, .T. ) ; +#18939 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 15.33333333333334600, 1.294441961969997200 ) ) ; +#18940 = AXIS2_PLACEMENT_3D ( 'NONE', #48840, #11618, #55108 ) ; +#18941 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#18942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37184, #74493, #80728, #43446 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610108500, 0.0004765929656973448600 ), + .UNSPECIFIED. ) ; +#18943 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462294100, 81.39409401757608000, -28.39369363572380300 ) ) ; +#18944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18946 = CONICAL_SURFACE ( 'NONE', #57062, 10.50000000000009600, 0.7853981633974518300 ) ; +#18947 = EDGE_LOOP ( 'NONE', ( #18584, #75497, #72051, #47440 ) ) ; +#18948 = CIRCLE ( 'NONE', #20593, 10.50000000000009600 ) ; +#18949 = ORIENTED_EDGE ( 'NONE', *, *, #3385, .F. ) ; +#18950 = EDGE_CURVE ( 'NONE', #2388, #24338, #28655, .T. ) ; +#18951 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18952 = EDGE_LOOP ( 'NONE', ( #12816, #28813, #25294, #43756 ) ) ; +#18953 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 17.66666666666667500, -10.73183747965883100 ) ) ; +#18954 = ORIENTED_EDGE ( 'NONE', *, *, #62160, .F. ) ; +#18955 = AXIS2_PLACEMENT_3D ( 'NONE', #9633, #15887, #59421 ) ; +#18956 = VERTEX_POINT ( 'NONE', #16692 ) ; +#18957 = ORIENTED_EDGE ( 'NONE', *, *, #21900, .F. ) ; +#18958 = FACE_OUTER_BOUND ( 'NONE', #79761, .T. ) ; +#18959 = ORIENTED_EDGE ( 'NONE', *, *, #69887, .F. ) ; +#18960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18961 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999975100, 80.16749699759752400, -28.20555803803014400 ) ) ; +#18962 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#18963 = ADVANCED_FACE ( 'NONE', ( #9444 ), #38614, .F. ) ; +#18964 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782523800, 51.43945992495533700, -28.34042301926881500 ) ) ; +#18965 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868445800, 41.08486215879781200, -28.32821106612155800 ) ) ; +#18966 = ORIENTED_EDGE ( 'NONE', *, *, #74684, .F. ) ; +#18967 = AXIS2_PLACEMENT_3D ( 'NONE', #23120, #41853, #79146 ) ; +#18968 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 81.65075715145280800, -28.20555803802997700 ) ) ; +#18969 = ORIENTED_EDGE ( 'NONE', *, *, #73730, .F. ) ; +#18970 = CONICAL_SURFACE ( 'NONE', #64829, 10.50000000000009600, 0.7853981633974500600 ) ; +#18971 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#18972 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346246500, 70.20590598242372900, -28.39369363572360800 ) ) ; +#18973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#18974 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#18975 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 80.10252595950220200, -28.26641963845903000 ) ) ; +#18976 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239000, 81.43945992495534400, -28.34042301926881200 ) ) ; +#18977 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#18978 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18979 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65109, #21309, #77314, #27845 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#18980 = SURFACE_SIDE_STYLE ('',( #18758 ) ) ; +#18981 = CARTESIAN_POINT ( 'NONE', ( -15.12208893941176600, 9.877911060588228800, -28.70506118104237500 ) ) ; +#18982 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174618900, 81.43945992495534400, -28.34042301926885800 ) ) ; +#18983 = CARTESIAN_POINT ( 'NONE', ( 10.47654718077867600, 9.410658115921107100, -28.68817749111424900 ) ) ; +#18984 = EDGE_CURVE ( 'NONE', #66575, #5959, #17268, .T. ) ; +#18985 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 21.16666666666668900, 6.794441961969992500 ) ) ; +#18986 = CIRCLE ( 'NONE', #1664, 10.50000000000009600 ) ; +#18987 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18988 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18989 = ORIENTED_EDGE ( 'NONE', *, *, #9585, .F. ) ; +#18990 = ORIENTED_EDGE ( 'NONE', *, *, #10684, .F. ) ; +#18991 = FACE_OUTER_BOUND ( 'NONE', #20780, .T. ) ; +#18992 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#18993 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 31.18929190448939400, -28.20555803802996700 ) ) ; +#18994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18995 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#18996 = ORIENTED_EDGE ( 'NONE', *, *, #61116, .T. ) ; +#18997 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019289100, 76.79999999999944300, -28.70555803803047500 ) ) ; +#18998 = CIRCLE ( 'NONE', #49970, 9.500000000000099500 ) ; +#18999 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19000 = CIRCLE ( 'NONE', #59597, 10.00000000000009400 ) ; +#19001 = EDGE_CURVE ( 'NONE', #57525, #70776, #14152, .T. ) ; +#19002 = ORIENTED_EDGE ( 'NONE', *, *, #34434, .T. ) ; +#19003 = EDGE_CURVE ( 'NONE', #46685, #79993, #80470, .T. ) ; +#19004 = CONICAL_SURFACE ( 'NONE', #489, 10.00000000000009200, 0.7853981633974447300 ) ; +#19006 = ORIENTED_EDGE ( 'NONE', *, *, #26734, .T. ) ; +#19005 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985400, 71.25732391202390700, -28.20555803802997700 ) ) ; +#19007 = CARTESIAN_POINT ( 'NONE', ( 2.254657264815464600, 31.00380841767820400, -28.64142799534455400 ) ) ; +#19008 = EDGE_LOOP ( 'NONE', ( #10510, #69600, #24674, #41149, #77953 ) ) ; +#19009 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#19010 = AXIS2_PLACEMENT_3D ( 'NONE', #7770, #57564, #45008 ) ; +#19011 = EDGE_CURVE ( 'NONE', #15532, #77660, #77590, .T. ) ; +#19012 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24180, #49154, #67951, #30706 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276984628300E-007, 0.0007677744771234609000 ), + .UNSPECIFIED. ) ; +#19013 = EDGE_CURVE ( 'NONE', #33380, #6774, #73706, .T. ) ; +#19014 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 51.22294471194859300, -28.20555803803047800 ) ) ; +#19015 = EDGE_CURVE ( 'NONE', #70543, #14827, #66016, .T. ) ; +#19016 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#19017 = CIRCLE ( 'NONE', #61373, 10.50000000000009600 ) ; +#19018 = ADVANCED_FACE ( 'NONE', ( #22112 ), #36690, .T. ) ; +#19019 = CIRCLE ( 'NONE', #78406, 10.00000000000009200 ) ; +#19020 = ORIENTED_EDGE ( 'NONE', *, *, #36238, .T. ) ; +#19021 = AXIS2_PLACEMENT_3D ( 'NONE', #44072, #6848, #50333 ) ; +#19022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19023 = EDGE_LOOP ( 'NONE', ( #23252, #29104, #42980, #6353 ) ) ; +#19024 = CARTESIAN_POINT ( 'NONE', ( 5.883745263583474400, 14.05000000000012000, -28.53994725305400600 ) ) ; +#19025 = ORIENTED_EDGE ( 'NONE', *, *, #16463, .F. ) ; +#19026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44332, #63442, #1389, #44869 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276984628300E-007, 0.0007677744771234513600 ), + .UNSPECIFIED. ) ; +#19027 = ORIENTED_EDGE ( 'NONE', *, *, #75253, .F. ) ; +#19028 = VERTEX_POINT ( 'NONE', #4969 ) ; +#19029 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656745000, 18.35339758437769200, -28.20555803803025800 ) ) ; +#19030 = ORIENTED_EDGE ( 'NONE', *, *, #51723, .F. ) ; +#19031 = ADVANCED_FACE ( 'NONE', ( #53237 ), #3586, .T. ) ; +#19032 = CIRCLE ( 'NONE', #5727, 10.50000000000009200 ) ; +#19033 = AXIS2_PLACEMENT_3D ( 'NONE', #69618, #32363, #75882 ) ; +#19034 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 64.83333333333334300, 0.1341879241256075400 ) ) ; +#19035 = AXIS2_PLACEMENT_3D ( 'NONE', #61675, #24399, #67911 ) ; +#19036 = ORIENTED_EDGE ( 'NONE', *, *, #26672, .T. ) ; +#19037 = AXIS2_PLACEMENT_3D ( 'NONE', #49178, #5693, #30728 ) ; +#19038 = VERTEX_POINT ( 'NONE', #30040 ) ; +#19039 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19040 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650641700, 10.01912043132461800, -28.30223257055586900 ) ) ; +#19041 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 29.83333333333333900, 0.9380355014189731800 ) ) ; +#19042 = VERTEX_POINT ( 'NONE', #73525 ) ; +#19043 = CIRCLE ( 'NONE', #34178, 10.50000000000009800 ) ; +#19044 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 73.20037755566777100, -28.53664883431653700 ) ) ; +#19045 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116448100, 20.39435118792235000, -28.41114655922298800 ) ) ; +#19046 = ADVANCED_FACE ( 'NONE', ( #7486 ), #51240, .F. ) ; +#19047 = ORIENTED_EDGE ( 'NONE', *, *, #34050, .T. ) ; +#19048 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19049 = CARTESIAN_POINT ( 'NONE', ( -9.544299612921431500, 9.030944946791045400, -28.65917496040402700 ) ) ; +#19050 = ADVANCED_FACE ( 'NONE', ( #5556 ), #18205, .F. ) ; +#19051 = CIRCLE ( 'NONE', #61136, 10.00000000000009200 ) ; +#19052 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 67.16666666666665700, 1.741883078712356500 ) ) ; +#19053 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#19054 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#19055 = AXIS2_PLACEMENT_3D ( 'NONE', #3894, #47385, #10170 ) ; +#19056 = EDGE_CURVE ( 'NONE', #28171, #19681, #51497, .T. ) ; +#19057 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890736200, 41.12856921007284000, -28.37063977681168200 ) ) ; +#19058 = ADVANCED_FACE ( 'NONE', ( #57151 ), #65912, .T. ) ; +#19059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19060 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973407000, 54.26498457889745500, -28.70555803803001600 ) ) ; +#19061 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 85.67652461701983700, -28.70555803803014400 ) ) ; +#19062 = FACE_OUTER_BOUND ( 'NONE', #56074, .T. ) ; +#19063 = CARTESIAN_POINT ( 'NONE', ( -3.073496928715791400, 71.37839075872574300, -28.29547734244348000 ) ) ; +#19064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19065 = EDGE_CURVE ( 'NONE', #29736, #52005, #37060, .T. ) ; +#19066 = CIRCLE ( 'NONE', #58233, 10.00000000000009400 ) ; +#19067 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 4.999999999999997300, 16.29444196196999100 ) ) ; +#19068 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965400, 49.65930907398620800, -28.35186440610858900 ) ) ; +#19069 = AXIS2_PLACEMENT_3D ( 'NONE', #28641, #53608, #9824 ) ; +#19070 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274709400, 45.54999999999999700, -28.20555803802996700 ) ) ; +#19071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19072 = ORIENTED_EDGE ( 'NONE', *, *, #53704, .F. ) ; +#19073 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 36.94142842854307000, -28.20555803802995200 ) ) ; +#19074 = ORIENTED_EDGE ( 'NONE', *, *, #56303, .F. ) ; +#19075 = FACE_OUTER_BOUND ( 'NONE', #5598, .T. ) ; +#19076 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19078 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 70.34267608797603100, -28.20555803802997700 ) ) ; +#19079 = ORIENTED_EDGE ( 'NONE', *, *, #78479, .F. ) ; +#19080 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75044, #492, #43990, #6754 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726978784800, 0.0008135742306949792500 ), + .UNSPECIFIED. ) ; +#19081 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#19082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19084 = FACE_OUTER_BOUND ( 'NONE', #18864, .T. ) ; +#19085 = AXIS2_PLACEMENT_3D ( 'NONE', #69107, #75362, #25615 ) ; +#19086 = FACE_OUTER_BOUND ( 'NONE', #60343, .T. ) ; +#19087 = ORIENTED_EDGE ( 'NONE', *, *, #32733, .F. ) ; +#19088 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019288400, 86.79999999999944300, -28.70555803803047500 ) ) ; +#19089 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19091 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655948500, 49.42298334620738800, -28.20555803802997400 ) ) ; +#19092 = ORIENTED_EDGE ( 'NONE', *, *, #62812, .F. ) ; +#19093 = VERTEX_POINT ( 'NONE', #80044 ) ; +#19094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19095 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19096 = CARTESIAN_POINT ( 'NONE', ( 3.073491842515371000, 60.22161678501182500, -28.29547179040443800 ) ) ; +#19097 = AXIS2_PLACEMENT_3D ( 'NONE', #27212, #70693, #33435 ) ; +#19098 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999568800, 51.96823913367204300, -28.70555803803014400 ) ) ; +#19099 = CIRCLE ( 'NONE', #53838, 10.00000000000009200 ) ; +#19100 = ORIENTED_EDGE ( 'NONE', *, *, #11522, .T. ) ; +#19101 = EDGE_CURVE ( 'NONE', #59974, #80471, #22623, .T. ) ; +#19102 = ORIENTED_EDGE ( 'NONE', *, *, #17741, .F. ) ; +#19103 = VERTEX_POINT ( 'NONE', #5785 ) ; +#19104 = ORIENTED_EDGE ( 'NONE', *, *, #35861, .F. ) ; +#19105 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19106 = VERTEX_POINT ( 'NONE', #67803 ) ; +#19107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3791, #22579, #41332, #4076 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721753500, 0.0008252574424209642600 ), + .UNSPECIFIED. ) ; +#19108 = EDGE_LOOP ( 'NONE', ( #36486, #8175, #76696, #49616 ) ) ; +#19109 = FACE_OUTER_BOUND ( 'NONE', #44645, .T. ) ; +#19110 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 35.83333333333335000, 6.794441961969992500 ) ) ; +#19111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19112 = CONICAL_SURFACE ( 'NONE', #49856, 10.50000000000009600, 0.7853981633974518300 ) ; +#19113 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59253, #15739, #65544, #28296 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721705800, 0.0008252574424209610100 ), + .UNSPECIFIED. ) ; +#19114 = EDGE_LOOP ( 'NONE', ( #66235, #20128, #18493 ) ) ; +#19115 = ORIENTED_EDGE ( 'NONE', *, *, #80505, .T. ) ; +#19116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19117 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855320000, 63.67681279774478800, -28.70555803802997700 ) ) ; +#19118 = ADVANCED_FACE ( 'NONE', ( #1637 ), #32782, .T. ) ; +#19119 = CONICAL_SURFACE ( 'NONE', #36204, 10.00000000000009400, 0.7853981633974447300 ) ; +#19120 = EDGE_CURVE ( 'NONE', #38804, #73958, #49303, .T. ) ; +#19121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19122 = ORIENTED_EDGE ( 'NONE', *, *, #7346, .T. ) ; +#19123 = FACE_OUTER_BOUND ( 'NONE', #23777, .T. ) ; +#19124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24188, #79951, #36674, #80199 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006649316450232187600, 0.0007021432065682605600 ), + .UNSPECIFIED. ) ; +#19125 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19126 = FACE_OUTER_BOUND ( 'NONE', #11017, .T. ) ; +#19127 = ADVANCED_FACE ( 'NONE', ( #55182 ), #63965, .F. ) ; +#19128 = AXIS2_PLACEMENT_3D ( 'NONE', #76200, #45158, #32693 ) ; +#19129 = EDGE_CURVE ( 'NONE', #59782, #32539, #80496, .T. ) ; +#19130 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194923200, 56.76150692817307700, -28.68631150211662400 ) ) ; +#19131 = EDGE_LOOP ( 'NONE', ( #19928, #3974, #63062, #4018, #48497 ) ) ; +#19132 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#19133 = CARTESIAN_POINT ( 'NONE', ( 15.78330646519572700, 80.79999999999967000, -28.32841359973469200 ) ) ; +#19134 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19135 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 7.166666666666683800, -12.20555803803000000 ) ) ; +#19136 = EDGE_CURVE ( 'NONE', #27898, #3836, #8117, .T. ) ; +#19137 = AXIS2_PLACEMENT_3D ( 'NONE', #66021, #28795, #72289 ) ; +#19138 = CARTESIAN_POINT ( 'NONE', ( 10.07349184251556200, 90.22161678501156200, -28.29547179040464000 ) ) ; +#19139 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19140 = CONICAL_SURFACE ( 'NONE', #62568, 10.00000000000009400, 0.7853981633974447300 ) ; +#19141 = ORIENTED_EDGE ( 'NONE', *, *, #19101, .T. ) ; +#19142 = ADVANCED_FACE ( 'NONE', ( #69778 ), #14305, .F. ) ; +#19143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19144 = CIRCLE ( 'NONE', #4502, 9.500000000000101300 ) ; +#19145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19146 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#19147 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19148 = ORIENTED_EDGE ( 'NONE', *, *, #2654, .T. ) ; +#19149 = ORIENTED_EDGE ( 'NONE', *, *, #45872, .F. ) ; +#19150 = CONICAL_SURFACE ( 'NONE', #13413, 10.00000000000009600, 0.7853981633974482800 ) ; +#19151 = AXIS2_PLACEMENT_3D ( 'NONE', #75794, #1262, #57046 ) ; +#19152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19153 = AXIS2_PLACEMENT_3D ( 'NONE', #66386, #29166, #72644 ) ; +#19154 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155513200, 65.79999999999968500, -28.20555803803030800 ) ) ; +#19155 = ORIENTED_EDGE ( 'NONE', *, *, #17352, .F. ) ; +#19156 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 70.34267608797617300, -28.20555803803014400 ) ) ; +#19157 = EDGE_CURVE ( 'NONE', #73637, #58803, #47348, .T. ) ; +#19158 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45375, #63945, #76680, #39420 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001679852151197403900 ), + .UNSPECIFIED. ) ; +#19159 = EDGE_CURVE ( 'NONE', #2995, #5385, #74492, .T. ) ; +#19160 = ADVANCED_FACE ( 'NONE', ( #30861 ), #6576, .T. ) ; +#19161 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19163 = AXIS2_PLACEMENT_3D ( 'NONE', #44198, #62763, #56752 ) ; +#19162 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804419600, 87.94142842854302000, -28.37229765499311200 ) ) ; +#19164 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19165 = FACE_OUTER_BOUND ( 'NONE', #41296, .T. ) ; +#19166 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19167 = CIRCLE ( 'NONE', #31367, 10.00000000000009600 ) ; +#19168 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 41.66666666666667100, 1.294441961969997200 ) ) ; +#19169 = ORIENTED_EDGE ( 'NONE', *, *, #33905, .T. ) ; +#19170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19171 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#19172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19174 = EDGE_CURVE ( 'NONE', #25990, #26617, #16266, .T. ) ; +#19175 = CARTESIAN_POINT ( 'NONE', ( 24.90200765231470100, 101.5020076523162400, -20.40507651328065800 ) ) ; +#19176 = EDGE_LOOP ( 'NONE', ( #24125, #47149, #69281 ) ) ; +#19177 = ADVANCED_FACE ( 'NONE', ( #67847 ), #12361, .T. ) ; +#19178 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 73.65857157145704500, -28.20555803803014400 ) ) ; +#19179 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19180 = AXIS2_PLACEMENT_3D ( 'NONE', #33572, #77088, #39824 ) ; +#19181 = AXIS2_PLACEMENT_3D ( 'NONE', #47513, #54059, #16822 ) ; +#19182 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.23796787468681700, -28.38801640354855800 ) ) ; +#19183 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310462200, 39.10230989102910100, -28.61774594594333000 ) ) ; +#19184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19185 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880588000, 25.17103694117760400, -28.53160243214819000 ) ) ; +#19186 = CIRCLE ( 'NONE', #33469, 9.500000000000099500 ) ; +#19187 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484722700, 81.01872124563895700, -28.53757464917589800 ) ) ; +#19188 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326100, 80.79999999999991200, -28.55171188418386000 ) ) ; +#19189 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489073400, 20.12856921007284000, -28.37063977681166400 ) ) ; +#19190 = ORIENTED_EDGE ( 'NONE', *, *, #35151, .T. ) ; +#19191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19192 = ORIENTED_EDGE ( 'NONE', *, *, #58911, .F. ) ; +#19193 = EDGE_LOOP ( 'NONE', ( #40567, #18863, #25985, #4288 ) ) ; +#19194 = EDGE_LOOP ( 'NONE', ( #62077, #26953, #55906, #52401, #74179, #30620 ) ) ; +#19195 = ORIENTED_EDGE ( 'NONE', *, *, #35722, .F. ) ; +#19196 = CONICAL_SURFACE ( 'NONE', #44734, 10.50000000000009600, 0.7853981633974500600 ) ; +#19197 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609197600, 13.41466791010194700, -28.53910738522641200 ) ) ; +#19198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19199 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 51.07757630314203800, -28.53861367218593500 ) ) ; +#19200 = EDGE_LOOP ( 'NONE', ( #4137, #35249 ) ) ; +#19201 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484686200, 61.01872124563893600, -28.53757464917593000 ) ) ; +#19202 = VERTEX_POINT ( 'NONE', #18828 ) ; +#19203 = CIRCLE ( 'NONE', #61730, 9.500000000000101300 ) ; +#19204 = AXIS2_PLACEMENT_3D ( 'NONE', #30107, #36317, #54803 ) ; +#19205 = VERTEX_POINT ( 'NONE', #573 ) ; +#19206 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 48.00000000000000700, -1.205558038030002800 ) ) ; +#19207 = ORIENTED_EDGE ( 'NONE', *, *, #55352, .F. ) ; +#19208 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57998, #51695, #8190, #20739 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104786600, 0.0005411754951802620000 ), + .UNSPECIFIED. ) ; +#19209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19210 = FACE_OUTER_BOUND ( 'NONE', #4302, .T. ) ; +#19211 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 13.16666666666667300, -2.545304000185620600 ) ) ; +#19212 = CARTESIAN_POINT ( 'NONE', ( 4.035907765261410600, 28.50212297965146400, -28.25344967589763800 ) ) ; +#19213 = ORIENTED_EDGE ( 'NONE', *, *, #51963, .T. ) ; +#19214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19215 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 81.08083798124324900, -28.45106778992441600 ) ) ; +#19216 = EDGE_CURVE ( 'NONE', #51858, #70620, #60038, .T. ) ; +#19217 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19218 = CIRCLE ( 'NONE', #40640, 10.00000000000009400 ) ; +#19219 = VERTEX_POINT ( 'NONE', #13130 ) ; +#19220 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811116600, 57.05460903980939200, -28.69802137271995300 ) ) ; +#19221 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19222 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 15.50000000000000000, 6.847000845227646500 ) ) ; +#19223 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19224 = ORIENTED_EDGE ( 'NONE', *, *, #26557, .T. ) ; +#19225 = CIRCLE ( 'NONE', #22206, 10.00000000000009200 ) ; +#19226 = ORIENTED_EDGE ( 'NONE', *, *, #77493, .T. ) ; +#19227 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122133000, 29.07332680091207800, -28.37233769390153900 ) ) ; +#19228 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19229 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349246200, 18.70543520232827800, -28.70555803802992800 ) ) ; +#19230 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195926800, 26.44142842854297000, -28.37229765499279200 ) ) ; +#19231 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 53.67681279774500800, -28.70555803802997700 ) ) ; +#19232 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#19233 = FACE_OUTER_BOUND ( 'NONE', #54683, .T. ) ; +#19235 = EDGE_CURVE ( 'NONE', #2597, #16205, #45504, .T. ) ; +#19234 = VERTEX_POINT ( 'NONE', #75391 ) ; +#19236 = ADVANCED_FACE ( 'NONE', ( #62005 ), #31882, .T. ) ; +#19237 = EDGE_CURVE ( 'NONE', #77979, #45383, #31112, .T. ) ; +#19238 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707776000, 31.16410593583297800, -28.68054222049973800 ) ) ; +#19239 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#19240 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19241 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#19242 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 89.98922577050342400, -28.37255355648633800 ) ) ; +#19243 = CARTESIAN_POINT ( 'NONE', ( -2.813460021729408600, 6.877501000801044200, -28.20555803803009500 ) ) ; +#19244 = ADVANCED_FACE ( 'NONE', ( #78568 ), #43465, .T. ) ; +#19245 = ORIENTED_EDGE ( 'NONE', *, *, #50831, .F. ) ; +#19246 = CARTESIAN_POINT ( 'NONE', ( 3.959731041493581100, 20.37561462481247100, -28.30309985153374800 ) ) ; +#19247 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#19248 = EDGE_CURVE ( 'NONE', #27795, #78782, #60065, .T. ) ; +#19249 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44078, #6586, #75410, #38107 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736147525300E-007, 0.0006896863566003439900 ), + .UNSPECIFIED. ) ; +#19250 = ADVANCED_FACE ( 'NONE', ( #76563 ), #74639, .F. ) ; +#19251 = FACE_OUTER_BOUND ( 'NONE', #54742, .T. ) ; +#19252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19254 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654650300, 51.32559822014173500, -28.29986836858010300 ) ) ; +#19253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19255 = EDGE_CURVE ( 'NONE', #47662, #53826, #10405, .T. ) ; +#19256 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 70.13716795162659400, -28.48697406221667400 ) ) ; +#19257 = CONICAL_SURFACE ( 'NONE', #64723, 10.50000000000009600, 0.7853981633974500600 ) ; +#19258 = EDGE_LOOP ( 'NONE', ( #29389, #14605, #6638, #48966 ) ) ; +#19259 = AXIS2_PLACEMENT_3D ( 'NONE', #47928, #10720, #54209 ) ; +#19260 = ORIENTED_EDGE ( 'NONE', *, *, #64204, .F. ) ; +#19261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19262 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 19.00000000000001800, -9.205558038030005700 ) ) ; +#19263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19264 = EDGE_LOOP ( 'NONE', ( #77982, #34014, #50483 ) ) ; +#19265 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#19266 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59722, #4206, #22984, #66504 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0009376786059871949400 ), + .UNSPECIFIED. ) ; +#19267 = ORIENTED_EDGE ( 'NONE', *, *, #75235, .T. ) ; +#19268 = ORIENTED_EDGE ( 'NONE', *, *, #65492, .T. ) ; +#19269 = ORIENTED_EDGE ( 'NONE', *, *, #75505, .T. ) ; +#19270 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 81.25732391202362200, -28.20555803803030800 ) ) ; +#19271 = ORIENTED_EDGE ( 'NONE', *, *, #74108, .T. ) ; +#19272 = AXIS2_PLACEMENT_3D ( 'NONE', #26674, #70163, #32895 ) ; +#19273 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19274 = EDGE_CURVE ( 'NONE', #34605, #73953, #28947, .T. ) ; +#19275 = EDGE_CURVE ( 'NONE', #30080, #30379, #16639, .T. ) ; +#19276 = CARTESIAN_POINT ( 'NONE', ( -11.03590776526139700, 18.00212297965146000, -28.25344967589762400 ) ) ; +#19277 = EDGE_CURVE ( 'NONE', #35539, #47101, #34768, .T. ) ; +#19278 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44149, #668, #56705, #19456 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207982721300E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#19279 = AXIS2_PLACEMENT_3D ( 'NONE', #27559, #71050, #33793 ) ; +#19280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19281 = ORIENTED_EDGE ( 'NONE', *, *, #21378, .T. ) ; +#19282 = CIRCLE ( 'NONE', #44343, 10.00000000000009600 ) ; +#19283 = ORIENTED_EDGE ( 'NONE', *, *, #29312, .F. ) ; +#19284 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919845600, 17.91070809551067100, -28.20555803803025800 ) ) ; +#19285 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492612600, 17.57379779496144700, -28.70555803802994200 ) ) ; +#19286 = AXIS2_PLACEMENT_3D ( 'NONE', #9621, #53127, #15877 ) ; +#19287 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856777800, 73.67681279774481600, -28.70555803803014400 ) ) ; +#19288 = ORIENTED_EDGE ( 'NONE', *, *, #78750, .T. ) ; +#19289 = ORIENTED_EDGE ( 'NONE', *, *, #51148, .F. ) ; +#19290 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451075600, 9.940690926013799000, -28.35186440610870300 ) ) ; +#19291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#19292 = CONICAL_SURFACE ( 'NONE', #47419, 10.00000000000009200, 0.7853981633974447300 ) ; +#19293 = EDGE_CURVE ( 'NONE', #46727, #53446, #2138, .T. ) ; +#19294 = AXIS2_PLACEMENT_3D ( 'NONE', #50820, #7321, #38317 ) ; +#19295 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19297 = ORIENTED_EDGE ( 'NONE', *, *, #35597, .F. ) ; +#19298 = CONICAL_SURFACE ( 'NONE', #80207, 10.50000000000009600, 0.7853981633974518300 ) ; +#19300 = EDGE_LOOP ( 'NONE', ( #74322, #18395, #32906 ) ) ; +#19299 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19301 = EDGE_LOOP ( 'NONE', ( #75828, #37550, #8862 ) ) ; +#19303 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29026, #66251, #22721, #35253 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785988396300, 0.001246815221881946100 ), + .UNSPECIFIED. ) ; +#19302 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#19304 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 62.66666666666667100, -3.705558038030004400 ) ) ; +#19305 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#19306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50925, #63232, #56958, #13734, #57221, #19971 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003103400, 0.004118671204006206900 ), + .UNSPECIFIED. ) ; +#19307 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 75.79999999999982700, -28.20555803803014400 ) ) ; +#19308 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 27.66666666666667100, -5.205558038030003100 ) ) ; +#19309 = AXIS2_PLACEMENT_3D ( 'NONE', #39889, #46362, #40143 ) ; +#19310 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#19311 = FACE_OUTER_BOUND ( 'NONE', #31319, .T. ) ; +#19312 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970300, 63.65857157145682500, -28.20555803803047800 ) ) ; +#19313 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 65.00000000000000000, -1.205558038030002800 ) ) ; +#19314 = EDGE_LOOP ( 'NONE', ( #69957, #20287, #42605 ) ) ; +#19315 = ORIENTED_EDGE ( 'NONE', *, *, #57517, .T. ) ; +#19316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19317 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 28.66749699759768400, -28.20555803802994200 ) ) ; +#19318 = AXIS2_PLACEMENT_3D ( 'NONE', #74660, #37351, #108 ) ; +#19319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19320 = ADVANCED_FACE ( 'NONE', ( #41532 ), #56119, .F. ) ; +#19321 = CARTESIAN_POINT ( 'NONE', ( -2.997971278275736400, 30.81091476818473800, -28.25432823872346000 ) ) ; +#19322 = EDGE_CURVE ( 'NONE', #34123, #7085, #68487, .T. ) ; +#19323 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19324 = CONICAL_SURFACE ( 'NONE', #55583, 10.50000000000009600, 0.7853981633974518300 ) ; +#19325 = ORIENTED_EDGE ( 'NONE', *, *, #43185, .F. ) ; +#19326 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000005200, 12.49926474563218900, -28.70555803802994200 ) ) ; +#19327 = CONICAL_SURFACE ( 'NONE', #56829, 10.50000000000009800, 0.7853981633974518300 ) ; +#19328 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#19329 = EDGE_LOOP ( 'NONE', ( #55555, #30326, #80571, #42117 ) ) ; +#19330 = ORIENTED_EDGE ( 'NONE', *, *, #15652, .F. ) ; +#19331 = AXIS2_PLACEMENT_3D ( 'NONE', #75563, #38277, #1032 ) ; +#19332 = ORIENTED_EDGE ( 'NONE', *, *, #22916, .F. ) ; +#19333 = CONICAL_SURFACE ( 'NONE', #78886, 10.00000000000009200, 0.7853981633974447300 ) ; +#19334 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#19335 = ORIENTED_EDGE ( 'NONE', *, *, #2772, .T. ) ; +#19336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19338 = ORIENTED_EDGE ( 'NONE', *, *, #30219, .T. ) ; +#19339 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035091300, 18.23507838941436900, -28.27580420063965500 ) ) ; +#19340 = ORIENTED_EDGE ( 'NONE', *, *, #22987, .T. ) ; +#19341 = ORIENTED_EDGE ( 'NONE', *, *, #11190, .F. ) ; +#19342 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344056900, 28.42298334620768300, -28.20555803802994200 ) ) ; +#19343 = ORIENTED_EDGE ( 'NONE', *, *, #3369, .T. ) ; +#19344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19345 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 36.22261628933271300, -28.70555803802995200 ) ) ; +#19346 = CARTESIAN_POINT ( 'NONE', ( 17.36059854261447600, 39.16749699759768800, -28.25434854811489100 ) ) ; +#19347 = ADVANCED_FACE ( 'NONE', ( #72695 ), #8154, .T. ) ; +#19348 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567151900, 9.746602415621900700, -28.20555803802992800 ) ) ; +#19349 = VERTEX_POINT ( 'NONE', #76713 ) ; +#19350 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537520300, 70.20590598242372900, -28.39369363572360400 ) ) ; +#19351 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714446300, 67.92318720225483700, -28.70555803803030800 ) ) ; +#19352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19353 = CIRCLE ( 'NONE', #28242, 10.00000000000009400 ) ; +#19354 = EDGE_CURVE ( 'NONE', #18937, #4270, #54015, .T. ) ; +#19355 = ORIENTED_EDGE ( 'NONE', *, *, #13438, .F. ) ; +#19356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19358 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719846000, 60.69966441803892100, -28.70555803802997700 ) ) ; +#19359 = ORIENTED_EDGE ( 'NONE', *, *, #15444, .F. ) ; +#19360 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13207, #62973, #44400, #7169 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459159343054100E-007, 0.0007679767755145101100 ), + .UNSPECIFIED. ) ; +#19361 = EDGE_LOOP ( 'NONE', ( #77574, #80320, #80249, #24340 ) ) ; +#19362 = EDGE_CURVE ( 'NONE', #43972, #72130, #58077, .T. ) ; +#19363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19364 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64813, #8983, #3015, #46506, #9265, #52788, #15557, #59054, #21815, #65365, #28090, #71581, #34320, #77828, #40552, #3279, #46788, #9548, #53057, #15808, #59338, #22082, #65608, #28378, #71862, #34598, #78094, #40829, #3552, #47057, #9834, #53334, #16089, #59615, #22341, #65875, #28646, #72137 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000004700, 0.1875000000000008900, 0.2187500000000010800, 0.2343750000000002200, 0.2421874999999997800, 0.2460937500000005300, 0.2480468750000009400, 0.2490234375000014700, 0.2500000000000020000, 0.3749999999999815700, 0.4374999999999716300, 0.4687499999999661400, 0.4843749999999632000, 0.4921874999999619200, 0.4960937499999620300, 0.4999999999999620900, 0.6249999999999729100, 0.6874999999999781300, 0.7187499999999805700, 0.7343749999999813500, 0.7499999999999820100, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#19365 = FACE_OUTER_BOUND ( 'NONE', #67147, .T. ) ; +#19366 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567151900, 9.746602415621900700, -28.20555803802992800 ) ) ; +#19367 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19368 = PLANE ( 'NONE', #59584 ) ; +#19369 = VERTEX_POINT ( 'NONE', #20987 ) ; +#19370 = CARTESIAN_POINT ( 'NONE', ( 10.97684032349377000, 10.01912043132448500, -28.30223257055606100 ) ) ; +#19371 = EDGE_CURVE ( 'NONE', #9915, #48799, #39560, .T. ) ; +#19372 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#19373 = ORIENTED_EDGE ( 'NONE', *, *, #37684, .T. ) ; +#19374 = ADVANCED_FACE ( 'NONE', ( #24997 ), #39719, .T. ) ; +#19375 = EDGE_CURVE ( 'NONE', #862, #77712, #25107, .T. ) ; +#19376 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13125, #62613, #19350, #62889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259906879200E-007, 0.0004559721492004766400 ), + .UNSPECIFIED. ) ; +#19377 = AXIS2_PLACEMENT_3D ( 'NONE', #23607, #60876, #17337 ) ; +#19378 = EDGE_CURVE ( 'NONE', #1277, #44043, #10655, .T. ) ; +#19379 = CIRCLE ( 'NONE', #29154, 9.500000000000101300 ) ; +#19380 = ORIENTED_EDGE ( 'NONE', *, *, #52103, .T. ) ; +#19381 = ORIENTED_EDGE ( 'NONE', *, *, #66912, .F. ) ; +#19382 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 33.66666666666667900, -8.133761268305512700 ) ) ; +#19383 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997500, 48.91684396980712500, -28.70555803802996700 ) ) ; +#19384 = AXIS2_PLACEMENT_3D ( 'NONE', #65063, #27801, #71288 ) ; +#19385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32263, #69516, #1242, #44713 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750528700, 0.0007596411030278620900 ), + .UNSPECIFIED. ) ; +#19386 = EDGE_CURVE ( 'NONE', #57912, #16674, #76959, .T. ) ; +#19387 = EDGE_CURVE ( 'NONE', #46667, #66775, #26966, .T. ) ; +#19388 = EDGE_CURVE ( 'NONE', #75158, #72470, #62499, .T. ) ; +#19389 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877845200, 20.02667319908792000, -28.37233769390153500 ) ) ; +#19390 = AXIS2_PLACEMENT_3D ( 'NONE', #79349, #42059, #4797 ) ; +#19391 = CONICAL_SURFACE ( 'NONE', #10833, 10.00000000000009400, 0.7853981633974447300 ) ; +#19392 = CARTESIAN_POINT ( 'NONE', ( 11.23081175365657800, 70.94994472024576700, -28.43636979168713800 ) ) ; +#19393 = CIRCLE ( 'NONE', #48341, 10.50000000000009600 ) ; +#19394 = ORIENTED_EDGE ( 'NONE', *, *, #25496, .F. ) ; +#19395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19396 = EDGE_LOOP ( 'NONE', ( #69586, #41292, #10537 ) ) ; +#19397 = EDGE_CURVE ( 'NONE', #78012, #10423, #45392, .T. ) ; +#19398 = AXIS2_PLACEMENT_3D ( 'NONE', #32896, #45377, #70164 ) ; +#19399 = AXIS2_PLACEMENT_3D ( 'NONE', #71382, #34130, #77632 ) ; +#19400 = ORIENTED_EDGE ( 'NONE', *, *, #32130, .T. ) ; +#19401 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2105, #26892, #32856, #45593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399032807252000E-007, 0.0009968645831862378800 ), + .UNSPECIFIED. ) ; +#19402 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#19403 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 5.000000000000010700, 9.794441961969996100 ) ) ; +#19404 = CIRCLE ( 'NONE', #60267, 10.50000000000009200 ) ; +#19405 = ORIENTED_EDGE ( 'NONE', *, *, #38764, .F. ) ; +#19406 = CIRCLE ( 'NONE', #22406, 10.50000000000009600 ) ; +#19407 = ORIENTED_EDGE ( 'NONE', *, *, #18539, .T. ) ; +#19408 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.62753447840815100, -28.38801640354867200 ) ) ; +#19409 = ORIENTED_EDGE ( 'NONE', *, *, #43435, .F. ) ; +#19410 = ORIENTED_EDGE ( 'NONE', *, *, #62038, .T. ) ; +#19411 = CONICAL_SURFACE ( 'NONE', #6884, 10.00000000000009400, 0.7853981633974447300 ) ; +#19412 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 90.51916201875609100, -28.45106778992441600 ) ) ; +#19413 = EDGE_LOOP ( 'NONE', ( #14322, #2157, #35900, #765 ) ) ; +#19414 = EDGE_LOOP ( 'NONE', ( #9501, #28854, #28790, #3085, #22607, #2536, #75178 ) ) ; +#19415 = ORIENTED_EDGE ( 'NONE', *, *, #56665, .F. ) ; +#19416 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#19417 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .F. ) ; +#19418 = CARTESIAN_POINT ( 'NONE', ( 17.20718528051586600, 5.585629425463026500, -27.67848181552182400 ) ) ; +#19419 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#19420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19421 = ORIENTED_EDGE ( 'NONE', *, *, #63842, .T. ) ; +#19422 = AXIS2_PLACEMENT_3D ( 'NONE', #45665, #8426, #53055 ) ; +#19423 = ORIENTED_EDGE ( 'NONE', *, *, #17858, .T. ) ; +#19424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19425 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 37.17143691309414100, -28.36981695106781500 ) ) ; +#19426 = ADVANCED_FACE ( 'NONE', ( #23055 ), #21113, .F. ) ; +#19427 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#19428 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 70.69966441803886400, -28.70555803803014400 ) ) ; +#19429 = AXIS2_PLACEMENT_3D ( 'NONE', #57843, #8046, #14331 ) ; +#19430 = ORIENTED_EDGE ( 'NONE', *, *, #10450, .T. ) ; +#19431 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 59.94924284854741400, -28.20555803802997700 ) ) ; +#19432 = VECTOR ( 'NONE', #4575, 1000.000000000000000 ) ; +#19433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19434 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 39.50000000000000700, -4.865812075874393000 ) ) ; +#19435 = VERTEX_POINT ( 'NONE', #9515 ) ; +#19436 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#19437 = EDGE_LOOP ( 'NONE', ( #34978, #66059, #23051, #13529 ) ) ; +#19438 = EDGE_CURVE ( 'NONE', #56101, #12788, #47995, .T. ) ; +#19439 = ORIENTED_EDGE ( 'NONE', *, *, #36128, .F. ) ; +#19440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19441 = ORIENTED_EDGE ( 'NONE', *, *, #51746, .T. ) ; +#19442 = ORIENTED_EDGE ( 'NONE', *, *, #75703, .T. ) ; +#19443 = AXIS2_PLACEMENT_3D ( 'NONE', #28656, #59630, #65889 ) ; +#19444 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609138100, 90.13716795162604000, -28.48697406221693000 ) ) ; +#19445 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714272300, 47.42318720225497900, -28.70555803802996700 ) ) ; +#19446 = CONICAL_SURFACE ( 'NONE', #61409, 10.50000000000009600, 0.7853981633974500600 ) ; +#19447 = CARTESIAN_POINT ( 'NONE', ( 19.49722744405834600, 100.5944548881165900, -23.11282986159955400 ) ) ; +#19448 = ADVANCED_FACE ( 'NONE', ( #54165 ), #68778, .F. ) ; +#19449 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540547700, 89.08026449164310600, -28.70555803803014100 ) ) ; +#19450 = AXIS2_PLACEMENT_3D ( 'NONE', #55993, #80761, #24731 ) ; +#19451 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#19452 = ORIENTED_EDGE ( 'NONE', *, *, #20334, .T. ) ; +#19453 = CARTESIAN_POINT ( 'NONE', ( 11.80141306497079000, 94.72249899919779600, -28.20555803803047500 ) ) ; +#19454 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000700, 41.06914835874665900, -28.45573375118225800 ) ) ; +#19455 = VERTEX_POINT ( 'NONE', #40787 ) ; +#19456 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 87.94142842854296300, -28.20555803802997700 ) ) ; +#19457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19458 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#19459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19461 = AXIS2_PLACEMENT_3D ( 'NONE', #12932, #56424, #19173 ) ; +#19462 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#19463 = FACE_OUTER_BOUND ( 'NONE', #16078, .T. ) ; +#19465 = ORIENTED_EDGE ( 'NONE', *, *, #9982, .T. ) ; +#19464 = ADVANCED_FACE ( 'NONE', ( #70714 ), #35693, .F. ) ; +#19466 = ADVANCED_FACE ( 'NONE', ( #8419 ), #2558, .F. ) ; +#19467 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#19468 = ORIENTED_EDGE ( 'NONE', *, *, #61955, .F. ) ; +#19469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19471 = ORIENTED_EDGE ( 'NONE', *, *, #11651, .T. ) ; +#19472 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#19473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19475 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820187800, 41.51741414369118400, -28.27509349209130500 ) ) ; +#19476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19477 = ADVANCED_FACE ( 'NONE', ( #4544 ), #50244, .F. ) ; +#19478 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60089, #10299, #10568, #54068 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002680960718950790900, 0.0006654852833076479100 ), + .UNSPECIFIED. ) ; +#19479 = EDGE_CURVE ( 'NONE', #8615, #25854, #33580, .T. ) ; +#19480 = CIRCLE ( 'NONE', #21914, 10.50000000000009600 ) ; +#19481 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 45.83333333333334300, 1.741883078712340300 ) ) ; +#19482 = EDGE_CURVE ( 'NONE', #77318, #62031, #37602, .T. ) ; +#19483 = FACE_OUTER_BOUND ( 'NONE', #53171, .T. ) ; +#19484 = ORIENTED_EDGE ( 'NONE', *, *, #79783, .T. ) ; +#19485 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19486 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 11.00000000000001800, -1.205558038030002800 ) ) ; +#19487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16355, #53605, #28905, #72399 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795555600 ), + .UNSPECIFIED. ) ; +#19488 = EDGE_CURVE ( 'NONE', #31993, #80699, #19107, .T. ) ; +#19489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#19491 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 80.16054007504463600, -28.34042301926880800 ) ) ; +#19492 = FACE_OUTER_BOUND ( 'NONE', #59540, .T. ) ; +#19493 = ORIENTED_EDGE ( 'NONE', *, *, #50507, .T. ) ; +#19494 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679528700, 51.08083798124332000, -28.45106778992437700 ) ) ; +#19495 = VERTEX_POINT ( 'NONE', #47554 ) ; +#19496 = EDGE_CURVE ( 'NONE', #18751, #7646, #39578, .T. ) ; +#19497 = EDGE_CURVE ( 'NONE', #11958, #50539, #4647, .T. ) ; +#19498 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428553400, 60.07141756547892400, -28.70555803802997700 ) ) ; +#19499 = ORIENTED_EDGE ( 'NONE', *, *, #39485, .F. ) ; +#19500 = CONICAL_SURFACE ( 'NONE', #15715, 10.00000000000009200, 0.7853981633974447300 ) ; +#19501 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19502 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 13.33333333333335900, -6.705558038030005700 ) ) ; +#19503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71527, #28044, #77767, #40508 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249022100, 0.0008027336008645992100 ), + .UNSPECIFIED. ) ; +#19504 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#19505 = ORIENTED_EDGE ( 'NONE', *, *, #9263, .T. ) ; +#19506 = VERTEX_POINT ( 'NONE', #10607 ) ; +#19507 = VERTEX_POINT ( 'NONE', #54103 ) ; +#19508 = VERTEX_POINT ( 'NONE', #16863 ) ; +#19509 = VERTEX_POINT ( 'NONE', #72632 ) ; +#19510 = VERTEX_POINT ( 'NONE', #60400 ) ; +#19511 = AXIS2_PLACEMENT_3D ( 'NONE', #55969, #68495, #31250 ) ; +#19512 = EDGE_CURVE ( 'NONE', #13624, #38201, #50548, .T. ) ; +#19513 = EDGE_CURVE ( 'NONE', #75109, #2702, #36143, .T. ) ; +#19514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19515 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55866, #49580, #80367, #18619, #62148, #24882 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0003916983562638609700, 0.001136699028517864000, 0.001881699700771871700 ), + .UNSPECIFIED. ) ; +#19516 = EDGE_CURVE ( 'NONE', #36284, #36888, #6489, .T. ) ; +#19517 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 82.31032580520964400, -28.59353418718925600 ) ) ; +#19518 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124993600, 66.46717019299462900, -28.53914313452728600 ) ) ; +#19519 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#19520 = FACE_OUTER_BOUND ( 'NONE', #44666, .T. ) ; +#19521 = AXIS2_PLACEMENT_3D ( 'NONE', #1511, #20041, #971 ) ; +#19522 = CARTESIAN_POINT ( 'NONE', ( 15.76978551732767500, 93.13959727627023700, -28.58648452042298900 ) ) ; +#19523 = ORIENTED_EDGE ( 'NONE', *, *, #33299, .F. ) ; +#19524 = VERTEX_POINT ( 'NONE', #4610 ) ; +#19525 = VERTEX_POINT ( 'NONE', #79154 ) ; +#19526 = CARTESIAN_POINT ( 'NONE', ( -16.62994320778226900, 19.61224493817484700, -28.57183245893611100 ) ) ; +#19527 = EDGE_LOOP ( 'NONE', ( #45896, #9342, #46965, #37133 ) ) ; +#19528 = ORIENTED_EDGE ( 'NONE', *, *, #45542, .F. ) ; +#19529 = CARTESIAN_POINT ( 'NONE', ( -19.89665139156451100, 0.2062701566476490300, -20.74758759016833000 ) ) ; +#19530 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 39.37705528805138800, -28.20555803802995200 ) ) ; +#19531 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671737400, 61.93585231025954800, -28.38420446581291400 ) ) ; +#19532 = FACE_OUTER_BOUND ( 'NONE', #77117, .T. ) ; +#19533 = AXIS2_PLACEMENT_3D ( 'NONE', #18941, #62750, #50186 ) ; +#19534 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.15857157145701000, -28.20555803802996700 ) ) ; +#19535 = AXIS2_PLACEMENT_3D ( 'NONE', #3017, #59057, #40281 ) ; +#19536 = ORIENTED_EDGE ( 'NONE', *, *, #28096, .T. ) ; +#19537 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 34.73212903577625400, -28.37244029424742200 ) ) ; +#19538 = AXIS2_PLACEMENT_3D ( 'NONE', #4453, #47936, #10733 ) ; +#19539 = ADVANCED_FACE ( 'NONE', ( #66839 ), #48296, .F. ) ; +#19540 = CARTESIAN_POINT ( 'NONE', ( -1.466819876342315500, 75.79999999999984100, -28.37307693585078300 ) ) ; +#19541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19542 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 16.83333333333335000, 6.794441961969992500 ) ) ; +#19543 = CONICAL_SURFACE ( 'NONE', #9169, 10.00000000000009400, 0.7853981633974447300 ) ; +#19544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19545 = ORIENTED_EDGE ( 'NONE', *, *, #11038, .F. ) ; +#19546 = EDGE_LOOP ( 'NONE', ( #58368, #16489, #20461 ) ) ; +#19547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19548 = ADVANCED_FACE ( 'NONE', ( #33741 ), #15241, .T. ) ; +#19549 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#19550 = AXIS2_PLACEMENT_3D ( 'NONE', #6730, #25523, #56499 ) ; +#19551 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914546900, 51.82440674572707500, -28.45987523529580100 ) ) ; +#19552 = EDGE_CURVE ( 'NONE', #78730, #43426, #21688, .T. ) ; +#19553 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19554 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25434, #50665, #69458, #32206 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691936863000E-007, 0.0008724363063894174000 ), + .UNSPECIFIED. ) ; +#19555 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428564100, 60.07141756547892400, -28.70555803802997700 ) ) ; +#19556 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#19557 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19558 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 31.11077422949656700, -28.37255355648633400 ) ) ; +#19559 = ADVANCED_FACE ( 'NONE', ( #52190 ), #24665, .T. ) ; +#19560 = EDGE_CURVE ( 'NONE', #58909, #67776, #7183, .T. ) ; +#19561 = ORIENTED_EDGE ( 'NONE', *, *, #74550, .T. ) ; +#19562 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743473100, 26.43535825203924700, -28.53896444442197500 ) ) ; +#19563 = ORIENTED_EDGE ( 'NONE', *, *, #36772, .F. ) ; +#19564 = AXIS2_PLACEMENT_3D ( 'NONE', #68145, #30896, #74419 ) ; +#19565 = ORIENTED_EDGE ( 'NONE', *, *, #44712, .T. ) ; +#19566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19567 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390325400, 61.46283204837320100, -28.48697406221674200 ) ) ; +#19568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19569 = ADVANCED_FACE ( 'NONE', ( #19126 ), #76233, .T. ) ; +#19570 = FACE_OUTER_BOUND ( 'NONE', #80401, .T. ) ; +#19571 = VERTEX_POINT ( 'NONE', #54345 ) ; +#19572 = ORIENTED_EDGE ( 'NONE', *, *, #52087, .F. ) ; +#19573 = CARTESIAN_POINT ( 'NONE', ( 3.935444260775301300, 60.09037803491489200, -28.29483400905890600 ) ) ; +#19574 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925621900, 31.78032162676580400, -28.55467576046955700 ) ) ; +#19575 = CIRCLE ( 'NONE', #16193, 9.500000000000097700 ) ; +#19576 = ORIENTED_EDGE ( 'NONE', *, *, #26676, .F. ) ; +#19577 = ORIENTED_EDGE ( 'NONE', *, *, #7418, .F. ) ; +#19578 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283200, 41.24660241562181500, -28.20555803802996700 ) ) ; +#19579 = ORIENTED_EDGE ( 'NONE', *, *, #48539, .F. ) ; +#19580 = ORIENTED_EDGE ( 'NONE', *, *, #54748, .F. ) ; +#19581 = ADVANCED_FACE ( 'NONE', ( #79484 ), #75242, .F. ) ; +#19582 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 60.50000000000001400, 2.454695999814380200 ) ) ; +#19583 = AXIS2_PLACEMENT_3D ( 'NONE', #1771, #45263, #8027 ) ; +#19584 = CONICAL_SURFACE ( 'NONE', #29706, 10.50000000000009600, 0.7853981633974500600 ) ; +#19585 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#19586 = CARTESIAN_POINT ( 'NONE', ( 1.705837858217823500, 14.05000000000000800, -28.37136602294606600 ) ) ; +#19587 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 25.50000000000000000, 4.650848422521012700 ) ) ; +#19588 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .F. ) ; +#19589 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#19590 = FACE_OUTER_BOUND ( 'NONE', #79607, .T. ) ; +#19591 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 49.42298334620755900, -28.20555803802996700 ) ) ; +#19592 = EDGE_CURVE ( 'NONE', #17621, #63749, #618, .T. ) ; +#19593 = ORIENTED_EDGE ( 'NONE', *, *, #71686, .T. ) ; +#19594 = VERTEX_POINT ( 'NONE', #23366 ) ; +#19595 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034431400, 49.42298334620755200, -28.20555803802997400 ) ) ; +#19596 = ORIENTED_EDGE ( 'NONE', *, *, #46255, .F. ) ; +#19597 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 62.83333333333335000, -4.152999154772353500 ) ) ; +#19598 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4070, #16593, #35375, #78894 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399032774264800E-007, 0.0009968645831863239700 ), + .UNSPECIFIED. ) ; +#19599 = ORIENTED_EDGE ( 'NONE', *, *, #66826, .F. ) ; +#19600 = VERTEX_POINT ( 'NONE', #35865 ) ; +#19601 = ORIENTED_EDGE ( 'NONE', *, *, #25494, .T. ) ; +#19602 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#19603 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 9.722944711948574800, -28.20555803802994200 ) ) ; +#19604 = CIRCLE ( 'NONE', #2373, 10.50000000000009600 ) ; +#19605 = PLANE ( 'NONE', #2561 ) ; +#19606 = CARTESIAN_POINT ( 'NONE', ( -14.89966555183968900, 70.79999999999998300, -28.20555803802989600 ) ) ; +#19607 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19608 = VERTEX_POINT ( 'NONE', #4848 ) ; +#19609 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328003200, 61.93585231025920000, -28.38420446581271200 ) ) ; +#19610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19611 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19612 = EDGE_CURVE ( 'NONE', #17957, #53788, #73545, .T. ) ; +#19613 = EDGE_CURVE ( 'NONE', #66318, #36616, #64908, .T. ) ; +#19614 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922501600, 70.09037803491502000, -28.29483400905891000 ) ) ; +#19615 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 51.19833471562218100, -28.28704243186578200 ) ) ; +#19616 = CIRCLE ( 'NONE', #73797, 10.50000000000009800 ) ; +#19617 = ORIENTED_EDGE ( 'NONE', *, *, #59436, .T. ) ; +#19618 = CARTESIAN_POINT ( 'NONE', ( -5.883745263583233700, 35.04999999999997600, -28.53994725305375700 ) ) ; +#19619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19620 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180800000, 51.65075715145310700, -28.20555803802997700 ) ) ; +#19621 = CARTESIAN_POINT ( 'NONE', ( -2.769169305343114600, 80.65007990305431900, -28.43638873268713100 ) ) ; +#19622 = CARTESIAN_POINT ( 'NONE', ( -4.375313979080695000, 8.372468488016762600, -28.60279861539359900 ) ) ; +#19623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19624 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199000, 51.25732391202399200, -28.20555803802997700 ) ) ; +#19625 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#19626 = AXIS2_PLACEMENT_3D ( 'NONE', #59849, #22572, #66101 ) ; +#19627 = EDGE_CURVE ( 'NONE', #35143, #6862, #25627, .T. ) ; +#19628 = EDGE_CURVE ( 'NONE', #45119, #8588, #59061, .T. ) ; +#19629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27230, #45945, #64771, #27503 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629357050883600E-007, 0.0003902800319294259600 ), + .UNSPECIFIED. ) ; +#19631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19632 = EDGE_CURVE ( 'NONE', #47101, #40002, #42127, .T. ) ; +#19633 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19634 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432826800, 9.746602415621900700, -28.20555803802992800 ) ) ; +#19635 = AXIS2_PLACEMENT_3D ( 'NONE', #71352, #34088, #77602 ) ; +#19636 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 66.33333333333334300, -5.205558038030008400 ) ) ; +#19637 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 61.43650294695131500, -28.30782889147482400 ) ) ; +#19638 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19639 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195930400, 57.94142842854297700, -28.37229765499282100 ) ) ; +#19640 = ORIENTED_EDGE ( 'NONE', *, *, #36982, .F. ) ; +#19641 = EDGE_LOOP ( 'NONE', ( #80198, #29082, #55624, #40257, #32049, #63135 ) ) ; +#19642 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175100, 90.46048989987120600, -28.36889022317246800 ) ) ; +#19643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19644 = VERTEX_POINT ( 'NONE', #42630 ) ; +#19645 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 79.94924284854670300, -28.20555803803047800 ) ) ; +#19646 = AXIS2_PLACEMENT_3D ( 'NONE', #18001, #48965, #11496 ) ; +#19647 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702727500, 72.22511094383827400, -28.55192314908444800 ) ) ; +#19648 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19649 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#19650 = AXIS2_PLACEMENT_3D ( 'NONE', #52044, #14820, #58337 ) ; +#19651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19653 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50853, #44572, #57150, #19898 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207919116000E-007, 0.0008724366121409682100 ), + .UNSPECIFIED. ) ; +#19654 = EDGE_CURVE ( 'NONE', #26683, #24894, #9020, .T. ) ; +#19655 = CIRCLE ( 'NONE', #15809, 10.00000000000009400 ) ; +#19656 = ORIENTED_EDGE ( 'NONE', *, *, #37691, .T. ) ; +#19657 = ORIENTED_EDGE ( 'NONE', *, *, #67746, .F. ) ; +#19658 = ADVANCED_FACE ( 'NONE', ( #56734 ), #30435, .T. ) ; +#19659 = ORIENTED_EDGE ( 'NONE', *, *, #52084, .T. ) ; +#19660 = CIRCLE ( 'NONE', #80767, 9.500000000000099500 ) ; +#19661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19662 = VERTEX_POINT ( 'NONE', #48869 ) ; +#19663 = EDGE_LOOP ( 'NONE', ( #64648, #58345, #39769, #43809, #5582, #74256, #27171, #72843 ) ) ; +#19664 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725666600, 43.66464174796073600, -28.53896444442201400 ) ) ; +#19665 = VERTEX_POINT ( 'NONE', #55416 ) ; +#19666 = ADVANCED_FACE ( 'NONE', ( #7082 ), #23674, .T. ) ; +#19667 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 31.50000000000001400, 4.650848422521016300 ) ) ; +#19668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19669 = EDGE_LOOP ( 'NONE', ( #27091, #56187, #29794, #14678 ) ) ; +#19670 = AXIS2_PLACEMENT_3D ( 'NONE', #36698, #80228, #42943 ) ; +#19671 = EDGE_CURVE ( 'NONE', #39291, #5570, #73304, .T. ) ; +#19672 = CONICAL_SURFACE ( 'NONE', #30183, 10.00000000000009400, 0.7853981633974447300 ) ; +#19673 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.65857157145661900, -28.20555803803030800 ) ) ; +#19674 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 55.79999999999999000, -28.20555803802997700 ) ) ; +#19675 = ADVANCED_FACE ( 'NONE', ( #58688 ), #36918, .T. ) ; +#19676 = ORIENTED_EDGE ( 'NONE', *, *, #59920, .T. ) ; +#19677 = ORIENTED_EDGE ( 'NONE', *, *, #54962, .T. ) ; +#19678 = CIRCLE ( 'NONE', #21787, 10.00000000000009200 ) ; +#19679 = ORIENTED_EDGE ( 'NONE', *, *, #12588, .T. ) ; +#19680 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.69949493661175700, -28.70555803802997700 ) ) ; +#19681 = VERTEX_POINT ( 'NONE', #68200 ) ; +#19682 = VERTEX_POINT ( 'NONE', #67939 ) ; +#19683 = EDGE_LOOP ( 'NONE', ( #21176, #25743, #22236, #35315 ) ) ; +#19684 = VERTEX_POINT ( 'NONE', #30959 ) ; +#19685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54391, #48111, #66920, #29682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646148200, 0.0009605145132141942200 ), + .UNSPECIFIED. ) ; +#19686 = FACE_OUTER_BOUND ( 'NONE', #46435, .T. ) ; +#19687 = CARTESIAN_POINT ( 'NONE', ( -10.95972934556082200, 18.22438272935921000, -28.30310183417005000 ) ) ; +#19688 = ORIENTED_EDGE ( 'NONE', *, *, #52959, .F. ) ; +#19689 = CIRCLE ( 'NONE', #19564, 10.50000000000009200 ) ; +#19690 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820188500, 60.08258585630879600, -28.27509349209130500 ) ) ; +#19691 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719593200, 57.94142842854297000, -28.37229765499282100 ) ) ; +#19692 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 2.833333333333339700, -12.20555803803000600 ) ) ; +#19693 = ORIENTED_EDGE ( 'NONE', *, *, #14491, .F. ) ; +#19694 = AXIS2_PLACEMENT_3D ( 'NONE', #31040, #37254, #68287 ) ; +#19695 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498700, 80.16054007504416700, -28.34042301926922400 ) ) ; +#19696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19697 = CIRCLE ( 'NONE', #70068, 10.50000000000022600 ) ; +#19698 = ORIENTED_EDGE ( 'NONE', *, *, #72049, .F. ) ; +#19699 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#19700 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428121800, 81.52858243452112700, -28.70555803803014400 ) ) ; +#19701 = CARTESIAN_POINT ( 'NONE', ( 18.71062789501681300, 2.578744164867825100, -25.40817447788320700 ) ) ; +#19702 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19703 = AXIS2_PLACEMENT_3D ( 'NONE', #49498, #12302, #55788 ) ; +#19704 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958200, 71.46283204837337200, -28.48697406221668500 ) ) ; +#19705 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19707 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#19708 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 37.33333333333334300, 3.124568980892187500 ) ) ; +#19709 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410166200, 70.46048989987066600, -28.36889022317254600 ) ) ; +#19710 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 41.67701665379221500, -28.20555803802997400 ) ) ; +#19711 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19712 = VERTEX_POINT ( 'NONE', #24694 ) ; +#19713 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 70.34267608797603100, -28.20555803802997700 ) ) ; +#19714 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 63.65857157145661200, -28.20555803803030800 ) ) ; +#19715 = ORIENTED_EDGE ( 'NONE', *, *, #3383, .F. ) ; +#19716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19717 = CARTESIAN_POINT ( 'NONE', ( 21.13913294476454800, 94.66956647238076500, -26.61980533947502900 ) ) ; +#19718 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#19719 = CARTESIAN_POINT ( 'NONE', ( 12.14815378900349600, 55.80000000000025300, -28.37148172714601600 ) ) ; +#19720 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19721 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 70.16616330387870400, -28.27375072930956200 ) ) ; +#19722 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856768900, 53.67681279774504300, -28.70555803802997700 ) ) ; +#19723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19724 = EDGE_LOOP ( 'NONE', ( #23027, #53471, #62918, #47040 ) ) ; +#19725 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22956, #60234, #29267, #72740 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610378800, 0.0004765929656968450500 ), + .UNSPECIFIED. ) ; +#19726 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 61.43945992495518000, -28.34042301926893600 ) ) ; +#19727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19728 = CIRCLE ( 'NONE', #72081, 9.500000000000101300 ) ; +#19729 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#19730 = ORIENTED_EDGE ( 'NONE', *, *, #44459, .T. ) ; +#19731 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 15.94142842854248700, -28.20555803803042500 ) ) ; +#19732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19733 = CIRCLE ( 'NONE', #46669, 10.00000000000009200 ) ; +#19734 = VERTEX_POINT ( 'NONE', #74479 ) ; +#19735 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#19736 = FACE_OUTER_BOUND ( 'NONE', #7515, .T. ) ; +#19737 = EDGE_CURVE ( 'NONE', #67834, #31156, #44536, .T. ) ; +#19738 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488259300, 81.99560977511656300, -28.70555803802997700 ) ) ; +#19740 = ORIENTED_EDGE ( 'NONE', *, *, #5165, .F. ) ; +#19739 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#19741 = ORIENTED_EDGE ( 'NONE', *, *, #58339, .T. ) ; +#19742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19743 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655689600, 41.67701665379241400, -28.20555803802997400 ) ) ; +#19744 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489900, 81.43945992495517300, -28.34042301926894000 ) ) ; +#19745 = ORIENTED_EDGE ( 'NONE', *, *, #10088, .T. ) ; +#19746 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19747 = CIRCLE ( 'NONE', #30646, 9.500000000000099500 ) ; +#19748 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957539200, 42.59027028261002800, -28.70555803802996700 ) ) ; +#19749 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#19750 = EDGE_CURVE ( 'NONE', #34797, #31509, #30191, .T. ) ; +#19751 = ORIENTED_EDGE ( 'NONE', *, *, #8284, .T. ) ; +#19752 = AXIS2_PLACEMENT_3D ( 'NONE', #13858, #45600, #26897 ) ; +#19753 = CONICAL_SURFACE ( 'NONE', #13925, 10.50000000000009600, 0.7853981633974500600 ) ; +#19754 = ORIENTED_EDGE ( 'NONE', *, *, #65644, .F. ) ; +#19755 = ORIENTED_EDGE ( 'NONE', *, *, #10077, .F. ) ; +#19756 = EDGE_LOOP ( 'NONE', ( #39202, #65075, #3407 ) ) ; +#19757 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153706400, 50.79999999999999000, -28.55171188418377400 ) ) ; +#19758 = FACE_OUTER_BOUND ( 'NONE', #45056, .T. ) ; +#19759 = ORIENTED_EDGE ( 'NONE', *, *, #23209, .T. ) ; +#19760 = ADVANCED_FACE ( 'NONE', ( #71333 ), #52821, .T. ) ; +#19761 = CONICAL_SURFACE ( 'NONE', #38235, 10.00000000000009200, 0.7853981633974447300 ) ; +#19762 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 8.833333333333348100, 0.1341879241256075400 ) ) ; +#19763 = AXIS2_PLACEMENT_3D ( 'NONE', #37093, #49585, #12391 ) ; +#19764 = ORIENTED_EDGE ( 'NONE', *, *, #14381, .F. ) ; +#19765 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 55.79999999999999000, -28.70555803802997700 ) ) ; +#19766 = EDGE_CURVE ( 'NONE', #44285, #70292, #69377, .T. ) ; +#19767 = EDGE_CURVE ( 'NONE', #10390, #62131, #5154, .T. ) ; +#19768 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 48.12623792124938400, -28.70555803802996700 ) ) ; +#19769 = AXIS2_PLACEMENT_3D ( 'NONE', #5654, #49146, #11927 ) ; +#19770 = VERTEX_POINT ( 'NONE', #188 ) ; +#19771 = AXIS2_PLACEMENT_3D ( 'NONE', #1302, #32583, #44780 ) ; +#19772 = CIRCLE ( 'NONE', #23160, 9.500000000000099500 ) ; +#19773 = ORIENTED_EDGE ( 'NONE', *, *, #67461, .T. ) ; +#19774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19775 = CONICAL_SURFACE ( 'NONE', #2335, 10.00000000000009400, 0.7853981633974447300 ) ; +#19776 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19777 = AXIS2_PLACEMENT_3D ( 'NONE', #53236, #15987, #59516 ) ; +#19778 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57699, #51399, #57438, #63989 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571436600, 0.0008043487657975249800 ), + .UNSPECIFIED. ) ; +#19779 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526979300, 70.01262610361139600, -28.29936525552453800 ) ) ; +#19780 = EDGE_CURVE ( 'NONE', #35530, #55188, #15682, .T. ) ; +#19781 = AXIS2_PLACEMENT_3D ( 'NONE', #28241, #53198, #15955 ) ; +#19782 = AXIS2_PLACEMENT_3D ( 'NONE', #80358, #43081, #5843 ) ; +#19783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19784 = ADVANCED_FACE ( 'NONE', ( #38216 ), #67446, .F. ) ; +#19785 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086482500, 30.62812581275678200, -28.37194250757536200 ) ) ; +#19786 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999971000, 53.43454006867090600, -28.70555803803001600 ) ) ; +#19787 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19788 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#19789 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19790 = AXIS2_PLACEMENT_3D ( 'NONE', #66971, #60720, #10947 ) ; +#19791 = CARTESIAN_POINT ( 'NONE', ( -18.80868994155322200, 2.382568793856470400, -25.18525229656999200 ) ) ; +#19792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19793 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819091600, 61.65075715145258800, -28.20555803803014100 ) ) ; +#19794 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19795 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034432500, 31.17701665379225800, -28.20555803802996000 ) ) ; +#19797 = ORIENTED_EDGE ( 'NONE', *, *, #33526, .F. ) ; +#19796 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906779700, 79.92963663972544500, -28.27338767626451600 ) ) ; +#19798 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19800 = ORIENTED_EDGE ( 'NONE', *, *, #16538, .T. ) ; +#19801 = ORIENTED_EDGE ( 'NONE', *, *, #46974, .T. ) ; +#19802 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 61.99560977511664800, -28.70555803802997700 ) ) ; +#19803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19804 = CONICAL_SURFACE ( 'NONE', #30847, 10.00000000000009400, 0.7853981633974447300 ) ; +#19805 = AXIS2_PLACEMENT_3D ( 'NONE', #76328, #63845, #32807 ) ; +#19806 = ORIENTED_EDGE ( 'NONE', *, *, #11280, .T. ) ; +#19807 = CONICAL_SURFACE ( 'NONE', #17991, 10.50000000000009600, 0.7853981633974518300 ) ; +#19808 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506423900, 41.51912043132477200, -28.30223257055575200 ) ) ; +#19809 = VERTEX_POINT ( 'NONE', #56485 ) ; +#19810 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 14.66666666666667500, -8.133761268305512700 ) ) ; +#19811 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 61.08083798124323500, -28.45106778992441600 ) ) ; +#19812 = ORIENTED_EDGE ( 'NONE', *, *, #79557, .F. ) ; +#19813 = CIRCLE ( 'NONE', #68884, 9.500000000000097700 ) ; +#19814 = ORIENTED_EDGE ( 'NONE', *, *, #25872, .T. ) ; +#19815 = EDGE_LOOP ( 'NONE', ( #22493, #59431, #64014, #20291, #44887 ) ) ; +#19816 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274712500, 24.23212903577627800, -28.37244029424740100 ) ) ; +#19817 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761000, 51.43945992495534400, -28.34042301926881900 ) ) ; +#19818 = AXIS2_PLACEMENT_3D ( 'NONE', #3243, #16047, #22045 ) ; +#19819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19821 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21281, #27551, #71045, #33781 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815563076100E-007, 0.0007763385940576977900 ), + .UNSPECIFIED. ) ; +#19822 = EDGE_CURVE ( 'NONE', #6326, #17250, #1205, .T. ) ; +#19823 = FACE_OUTER_BOUND ( 'NONE', #79673, .T. ) ; +#19824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19825 = ORIENTED_EDGE ( 'NONE', *, *, #29558, .F. ) ; +#19826 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050735900, 38.57379779496234600, -28.70555803802995200 ) ) ; +#19827 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19828 = CONICAL_SURFACE ( 'NONE', #14385, 10.00000000000009400, 0.7853981633974447300 ) ; +#19829 = AXIS2_PLACEMENT_3D ( 'NONE', #16412, #47369, #53655 ) ; +#19830 = CARTESIAN_POINT ( 'NONE', ( 2.047191297380207100E-013, 88.17143691309404100, -28.36981695106791100 ) ) ; +#19831 = ORIENTED_EDGE ( 'NONE', *, *, #54152, .F. ) ; +#19832 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55264, #80300, #68061, #30813 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867055673000E-007, 0.001052545149297106800 ), + .UNSPECIFIED. ) ; +#19833 = ORIENTED_EDGE ( 'NONE', *, *, #59710, .F. ) ; +#19834 = ORIENTED_EDGE ( 'NONE', *, *, #911, .F. ) ; +#19835 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19836 = ORIENTED_EDGE ( 'NONE', *, *, #20569, .F. ) ; +#19837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33635, #27129, #21413, #64943 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287113152400E-007, 0.0007303759720927695700 ), + .UNSPECIFIED. ) ; +#19838 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#19839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19840 = CONICAL_SURFACE ( 'NONE', #47053, 10.50000000000009600, 0.7853981633974500600 ) ; +#19841 = ORIENTED_EDGE ( 'NONE', *, *, #36293, .T. ) ; +#19842 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19844 = ADVANCED_FACE ( 'NONE', ( #19758 ), #34352, .F. ) ; +#19845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58567, #27591, #71080, #33825 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387036916000E-007, 0.0007987676590766533100 ), + .UNSPECIFIED. ) ; +#19846 = EDGE_LOOP ( 'NONE', ( #1901, #49504, #38756 ) ) ; +#19847 = EDGE_CURVE ( 'NONE', #48057, #49715, #67550, .T. ) ; +#19848 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180780500, 59.94924284854683800, -28.20555803803030800 ) ) ; +#19849 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198582500, 70.90033558196111600, -28.70555803802997700 ) ) ; +#19850 = VERTEX_POINT ( 'NONE', #69265 ) ; +#19851 = CIRCLE ( 'NONE', #7000, 9.500000000000099500 ) ; +#19852 = EDGE_CURVE ( 'NONE', #74769, #57500, #3187, .T. ) ; +#19853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19854 = ADVANCED_FACE ( 'NONE', ( #40184 ), #65519, .F. ) ; +#19855 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 58.33333333333334300, -5.535685056952199400 ) ) ; +#19856 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471413000, 9.968680884981180800, -28.51286550264493200 ) ) ; +#19857 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 14.05000000000000400, -28.20555803802992800 ) ) ; +#19858 = EDGE_CURVE ( 'NONE', #32608, #68974, #53062, .T. ) ; +#19859 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19860 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 23.33333333333335000, -8.133761268305512700 ) ) ; +#19861 = EDGE_CURVE ( 'NONE', #58612, #54001, #38573, .T. ) ; +#19862 = AXIS2_PLACEMENT_3D ( 'NONE', #9276, #59067, #46516 ) ; +#19863 = CARTESIAN_POINT ( 'NONE', ( -17.40875264640681800, 20.17947987789648000, -28.41157636893867900 ) ) ; +#19864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19865 = CONICAL_SURFACE ( 'NONE', #46591, 10.00000000000009200, 0.7853981633974447300 ) ; +#19866 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540442000, 62.51973550835659700, -28.70555803802997700 ) ) ; +#19867 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19868 = ADVANCED_FACE ( 'NONE', ( #54778 ), #51001, .T. ) ; +#19869 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 60.66666666666667900, 4.294441961969993400 ) ) ; +#19870 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#19871 = EDGE_LOOP ( 'NONE', ( #9751, #71990, #12437 ) ) ; +#19872 = AXIS2_PLACEMENT_3D ( 'NONE', #35709, #10970, #54463 ) ; +#19874 = VERTEX_POINT ( 'NONE', #32546 ) ; +#19873 = EDGE_CURVE ( 'NONE', #40985, #77263, #50850, .T. ) ; +#19875 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17071, #23313, #29606, #73101 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520726000, 0.004414519045341043000 ), + .UNSPECIFIED. ) ; +#19876 = EDGE_CURVE ( 'NONE', #69411, #74524, #24170, .T. ) ; +#19877 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19878 = EDGE_CURVE ( 'NONE', #60061, #79164, #21723, .T. ) ; +#19879 = ORIENTED_EDGE ( 'NONE', *, *, #1334, .F. ) ; +#19880 = ADVANCED_FACE ( 'NONE', ( #36286 ), #63565, .F. ) ; +#19881 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19882 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#19883 = CONICAL_SURFACE ( 'NONE', #39643, 10.50000000000009600, 0.7853981633974500600 ) ; +#19884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19885 = ORIENTED_EDGE ( 'NONE', *, *, #11156, .T. ) ; +#19886 = CIRCLE ( 'NONE', #22652, 10.50000000000009600 ) ; +#19887 = ORIENTED_EDGE ( 'NONE', *, *, #10747, .T. ) ; +#19888 = AXIS2_PLACEMENT_3D ( 'NONE', #12885, #68883, #31645 ) ; +#19889 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 49.65930907398620800, -28.35186440610858900 ) ) ; +#19890 = CONICAL_SURFACE ( 'NONE', #23516, 10.00000000000009200, 0.7853981633974447300 ) ; +#19891 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19892 = CIRCLE ( 'NONE', #64352, 9.500000000000099500 ) ; +#19893 = CARTESIAN_POINT ( 'NONE', ( 3.464465136191022600, 9.181517971446963200, -28.67456072961195100 ) ) ; +#19894 = ORIENTED_EDGE ( 'NONE', *, *, #73471, .F. ) ; +#19895 = CARTESIAN_POINT ( 'NONE', ( -10.93544426077497500, 60.09037803491502000, -28.29483400905891000 ) ) ; +#19896 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19897 = EDGE_LOOP ( 'NONE', ( #63376, #36266, #78651, #17018 ) ) ; +#19898 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.15857157145701000, -28.20555803802994200 ) ) ; +#19899 = EDGE_CURVE ( 'NONE', #10390, #55080, #15846, .T. ) ; +#19900 = ORIENTED_EDGE ( 'NONE', *, *, #69000, .T. ) ; +#19901 = AXIS2_PLACEMENT_3D ( 'NONE', #13791, #20040, #75772 ) ; +#19902 = CARTESIAN_POINT ( 'NONE', ( 11.03592035693674100, 20.59789380924897300, -28.25343951603328200 ) ) ; +#19903 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19904 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000010200, 9.418457393421036300, -28.68863412692833800 ) ) ; +#19905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19906 = FACE_OUTER_BOUND ( 'NONE', #65057, .T. ) ; +#19907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19908 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#19909 = ORIENTED_EDGE ( 'NONE', *, *, #19963, .T. ) ; +#19910 = FACE_OUTER_BOUND ( 'NONE', #60947, .T. ) ; +#19911 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 64.16666666666667100, 0.9380355014189834000 ) ) ; +#19912 = ORIENTED_EDGE ( 'NONE', *, *, #62645, .F. ) ; +#19913 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#19914 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 49.66749699759768100, -28.20555803802996700 ) ) ; +#19915 = ORIENTED_EDGE ( 'NONE', *, *, #62082, .F. ) ; +#19916 = EDGE_LOOP ( 'NONE', ( #37910, #55085, #41281 ) ) ; +#19917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19918 = ORIENTED_EDGE ( 'NONE', *, *, #6157, .F. ) ; +#19919 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19920 = ORIENTED_EDGE ( 'NONE', *, *, #32849, .F. ) ; +#19921 = CIRCLE ( 'NONE', #60097, 9.500000000000097700 ) ; +#19922 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 80.69949493661175700, -28.70555803802997700 ) ) ; +#19923 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19924 = CARTESIAN_POINT ( 'NONE', ( 10.37150777124374200, 61.43250300240215700, -28.25053031809483900 ) ) ; +#19925 = AXIS2_PLACEMENT_3D ( 'NONE', #50407, #13223, #56703 ) ; +#19926 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19927 = ORIENTED_EDGE ( 'NONE', *, *, #78610, .F. ) ; +#19928 = ORIENTED_EDGE ( 'NONE', *, *, #61241, .F. ) ; +#19929 = ORIENTED_EDGE ( 'NONE', *, *, #76770, .T. ) ; +#19930 = AXIS2_PLACEMENT_3D ( 'NONE', #61476, #30720, #18200 ) ; +#19931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19932 = VERTEX_POINT ( 'NONE', #70062 ) ; +#19933 = EDGE_CURVE ( 'NONE', #20378, #71715, #32390, .T. ) ; +#19934 = VECTOR ( 'NONE', #60972, 1000.000000000000000 ) ; +#19935 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#19936 = AXIS2_PLACEMENT_3D ( 'NONE', #69529, #57298, #75786 ) ; +#19937 = CARTESIAN_POINT ( 'NONE', ( 16.45764012468375300, 66.42426956854046700, -28.60339038649759400 ) ) ; +#19938 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 29.33333333333334300, -5.205558038030008400 ) ) ; +#19939 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 41.07757630314203800, -28.53861367218593500 ) ) ; +#19940 = AXIS2_PLACEMENT_3D ( 'NONE', #9602, #53108, #15863 ) ; +#19941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19942 = ADVANCED_FACE ( 'NONE', ( #80083 ), #78130, .T. ) ; +#19943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2614, #21435, #40160, #2898 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137489452000 ), + .UNSPECIFIED. ) ; +#19944 = AXIS2_PLACEMENT_3D ( 'NONE', #71546, #15251, #65335 ) ; +#19945 = CIRCLE ( 'NONE', #50128, 10.50000000000009600 ) ; +#19946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#19947 = ORIENTED_EDGE ( 'NONE', *, *, #4703, .F. ) ; +#19948 = VERTEX_POINT ( 'NONE', #14588 ) ; +#19949 = FACE_OUTER_BOUND ( 'NONE', #28333, .T. ) ; +#19950 = ADVANCED_FACE ( 'NONE', ( #1235 ), #44989, .F. ) ; +#19951 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37456, #6479, #56240, #18982 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004704683700E-007, 0.0004089065559710147300 ), + .UNSPECIFIED. ) ; +#19952 = VERTEX_POINT ( 'NONE', #28249 ) ; +#19953 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174765400, 71.43945992495534400, -28.34042301926881900 ) ) ; +#19954 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 75.79999999999999700, -28.70525300642875200 ) ) ; +#19955 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 0.6666666666666835100, 8.320721403598824400 ) ) ; +#19956 = CIRCLE ( 'NONE', #65170, 10.00000000000009200 ) ; +#19957 = CIRCLE ( 'NONE', #23139, 10.50000000000009200 ) ; +#19959 = EDGE_CURVE ( 'NONE', #11733, #33173, #9695, .T. ) ; +#19958 = ORIENTED_EDGE ( 'NONE', *, *, #6515, .F. ) ; +#19960 = ADVANCED_FACE ( 'NONE', ( #17809 ), #11960, .T. ) ; +#19961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19963 = EDGE_CURVE ( 'NONE', #71722, #77643, #76011, .T. ) ; +#19962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22763, #29069, #54022, #16778 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199203700, 0.005783220423748002300 ), + .UNSPECIFIED. ) ; +#19964 = ORIENTED_EDGE ( 'NONE', *, *, #61562, .F. ) ; +#19965 = CIRCLE ( 'NONE', #40649, 10.50000000000022600 ) ; +#19966 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567169600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#19967 = ORIENTED_EDGE ( 'NONE', *, *, #48432, .T. ) ; +#19968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#19969 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#19970 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#19971 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914525200, 59.77559325427176200, -28.45987523529584700 ) ) ; +#19972 = ORIENTED_EDGE ( 'NONE', *, *, #52125, .T. ) ; +#19973 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880575900, 14.67103694117740000, -28.53160243214820500 ) ) ; +#19974 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 30.75489551879203300, -28.37193179497695900 ) ) ; +#19975 = EDGE_CURVE ( 'NONE', #27550, #7230, #61576, .T. ) ; +#19976 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61010, #34875, #41119, #23750 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279228135470000E-007, 0.001119324643800057400 ), + .UNSPECIFIED. ) ; +#19977 = CARTESIAN_POINT ( 'NONE', ( -11.95723973586455600, 65.79999999999998300, -28.53819074160683300 ) ) ; +#19978 = ADVANCED_FACE ( 'NONE', ( #61606 ), #59651, .T. ) ; +#19980 = CONICAL_SURFACE ( 'NONE', #33584, 10.50000000000009600, 0.7853981633974500600 ) ; +#19979 = CARTESIAN_POINT ( 'NONE', ( 9.487278546916565200, 51.47860033657553200, -28.56001054660935500 ) ) ; +#19981 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 35.04999999999997600, -28.20555803802995200 ) ) ; +#19982 = EDGE_LOOP ( 'NONE', ( #27823, #53751, #29748 ) ) ; +#19983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19984 = EDGE_CURVE ( 'NONE', #29390, #73343, #47059, .T. ) ; +#19986 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 35.16666666666667100, -6.205558038030004800 ) ) ; +#19985 = CONICAL_SURFACE ( 'NONE', #27895, 10.00000000000009400, 0.7853981633974447300 ) ; +#19987 = EDGE_CURVE ( 'NONE', #48799, #78314, #32626, .T. ) ; +#19988 = VERTEX_POINT ( 'NONE', #16509 ) ; +#19989 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19990 = CARTESIAN_POINT ( 'NONE', ( 4.626308717395019700, 92.65850107289570300, -28.66333578723706700 ) ) ; +#19991 = EDGE_LOOP ( 'NONE', ( #24313, #76541, #42821 ) ) ; +#19992 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 70.16054007504466500, -28.34042301926880800 ) ) ; +#19993 = VERTEX_POINT ( 'NONE', #60041 ) ; +#19994 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#19995 = EDGE_LOOP ( 'NONE', ( #1461, #20768, #20717 ) ) ; +#19996 = CARTESIAN_POINT ( 'NONE', ( 16.53104581592687300, 93.13104581592691000, -28.60063946575985500 ) ) ; +#19997 = ADVANCED_FACE ( 'NONE', ( #48906 ), #26566, .F. ) ; +#19998 = FACE_OUTER_BOUND ( 'NONE', #9544, .T. ) ; +#20000 = ORIENTED_EDGE ( 'NONE', *, *, #29445, .T. ) ; +#19999 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729965800, 61.58737389638835700, -28.29936525552484400 ) ) ; +#20001 = AXIS2_PLACEMENT_3D ( 'NONE', #59947, #22674, #66202 ) ; +#20002 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20003 = ORIENTED_EDGE ( 'NONE', *, *, #31163, .T. ) ; +#20004 = EDGE_CURVE ( 'NONE', #45996, #71936, #28548, .T. ) ; +#20005 = EDGE_CURVE ( 'NONE', #42265, #15748, #18167, .T. ) ; +#20006 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#20007 = EDGE_CURVE ( 'NONE', #20135, #54223, #3687, .T. ) ; +#20008 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20010 = ORIENTED_EDGE ( 'NONE', *, *, #59428, .F. ) ; +#20011 = ORIENTED_EDGE ( 'NONE', *, *, #13328, .T. ) ; +#20012 = CIRCLE ( 'NONE', #24307, 10.00000000000009400 ) ; +#20013 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 70.24722181384565500, -28.70555803802999500 ) ) ; +#20014 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386700, 30.93650294695131500, -28.30782889147482000 ) ) ; +#20015 = AXIS2_PLACEMENT_3D ( 'NONE', #44687, #7464, #50960 ) ; +#20016 = CARTESIAN_POINT ( 'NONE', ( 3.073496928715947300, 81.37839075872577200, -28.29547734244345100 ) ) ; +#20017 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20018 = ORIENTED_EDGE ( 'NONE', *, *, #56114, .F. ) ; +#20019 = CIRCLE ( 'NONE', #16325, 10.00000000000009400 ) ; +#20020 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463300, 61.37838321498816200, -28.29547179040444100 ) ) ; +#20021 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20022 = AXIS2_PLACEMENT_3D ( 'NONE', #4120, #10391, #72418 ) ; +#20023 = CARTESIAN_POINT ( 'NONE', ( 16.33099763933828900, 35.62682920859743500, -28.62115403300396100 ) ) ; +#20024 = AXIS2_PLACEMENT_3D ( 'NONE', #56740, #19489, #63017 ) ; +#20025 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310472500, 30.99769010897086800, -28.61774594594331600 ) ) ; +#20026 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#20027 = AXIS2_PLACEMENT_3D ( 'NONE', #56544, #19296, #62833 ) ; +#20028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20029 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#20030 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80473, #18184, #24707, #68218 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978158900E-007, 0.001076778502991151400 ), + .UNSPECIFIED. ) ; +#20031 = FACE_OUTER_BOUND ( 'NONE', #38829, .T. ) ; +#20032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20033 = ORIENTED_EDGE ( 'NONE', *, *, #2097, .F. ) ; +#20034 = ORIENTED_EDGE ( 'NONE', *, *, #23071, .T. ) ; +#20035 = FACE_OUTER_BOUND ( 'NONE', #76697, .T. ) ; +#20036 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 6.666666666666687400, -3.705558038030004400 ) ) ; +#20037 = AXIS2_PLACEMENT_3D ( 'NONE', #48172, #10967, #54457 ) ; +#20038 = ORIENTED_EDGE ( 'NONE', *, *, #10359, .F. ) ; +#20039 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534570300, 30.10079448659600100, -28.70555803802995200 ) ) ; +#20040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20042 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269739400, 51.58737389638852000, -28.29936525552453800 ) ) ; +#20043 = CONICAL_SURFACE ( 'NONE', #48913, 10.50000000000009600, 0.7853981633974500600 ) ; +#20044 = CONICAL_SURFACE ( 'NONE', #71014, 10.00000000000009200, 0.7853981633974447300 ) ; +#20045 = EDGE_LOOP ( 'NONE', ( #46709, #55761, #50628, #21434 ) ) ; +#20046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20047 = EDGE_CURVE ( 'NONE', #34811, #15981, #70015, .T. ) ; +#20048 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818956600, 69.94924284854708700, -28.20555803802997700 ) ) ; +#20049 = CIRCLE ( 'NONE', #49440, 10.00000000000009600 ) ; +#20050 = AXIS2_PLACEMENT_3D ( 'NONE', #65853, #28621, #72119 ) ; +#20051 = VERTEX_POINT ( 'NONE', #17048 ) ; +#20052 = VERTEX_POINT ( 'NONE', #60568 ) ; +#20053 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59127, #77627, #71662, #34388 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454769920400E-007, 0.0004559726636571052500 ), + .UNSPECIFIED. ) ; +#20054 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20055 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844441900, 55.79999999999975600, -28.20555803803014400 ) ) ; +#20056 = CONICAL_SURFACE ( 'NONE', #325, 10.50000000000009600, 0.7853981633974482800 ) ; +#20057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20058 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819353600, 69.94924284854693000, -28.20555803802997700 ) ) ; +#20059 = CONICAL_SURFACE ( 'NONE', #9005, 10.50000000000009600, 0.7853981633974500600 ) ; +#20060 = ORIENTED_EDGE ( 'NONE', *, *, #34515, .T. ) ; +#20061 = AXIS2_PLACEMENT_3D ( 'NONE', #10767, #73056, #54259 ) ; +#20062 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052319300, 70.28233213024636000, -28.25051428653865000 ) ) ; +#20063 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20064 = ORIENTED_EDGE ( 'NONE', *, *, #74983, .F. ) ; +#20065 = ADVANCED_FACE ( 'NONE', ( #46956 ), #57675, .T. ) ; +#20066 = ORIENTED_EDGE ( 'NONE', *, *, #60634, .F. ) ; +#20067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69240, #25741, #951, #44431 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785963473700E-007, 0.0006862403197095077400 ), + .UNSPECIFIED. ) ; +#20068 = CARTESIAN_POINT ( 'NONE', ( -17.34257044682282300, 5.314770359379327400, -27.54078563870991300 ) ) ; +#20069 = ORIENTED_EDGE ( 'NONE', *, *, #44005, .F. ) ; +#20070 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20071 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.43250300240229600, -28.20555803802995200 ) ) ; +#20072 = CARTESIAN_POINT ( 'NONE', ( 3.839550451718937800, 90.46231468379674800, -28.37082013777851600 ) ) ; +#20073 = CARTESIAN_POINT ( 'NONE', ( -9.279233496942035600, 70.09951448976266900, -28.63282631410026000 ) ) ; +#20074 = ADVANCED_FACE ( 'NONE', ( #9998 ), #24595, .T. ) ; +#20075 = CONICAL_SURFACE ( 'NONE', #41211, 10.50000000000009600, 0.7853981633974518300 ) ; +#20076 = FACE_OUTER_BOUND ( 'NONE', #35292, .T. ) ; +#20077 = ORIENTED_EDGE ( 'NONE', *, *, #56434, .F. ) ; +#20078 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999925400, 10.46823913367206800, -28.70555803802994200 ) ) ; +#20079 = AXIS2_PLACEMENT_3D ( 'NONE', #4393, #47888, #10663 ) ; +#20080 = ORIENTED_EDGE ( 'NONE', *, *, #52733, .T. ) ; +#20081 = ADVANCED_FACE ( 'NONE', ( #13907 ), #72307, .F. ) ; +#20082 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.29722425778845000, -28.32715733700492700 ) ) ; +#20083 = CIRCLE ( 'NONE', #70627, 10.00000000000009200 ) ; +#20084 = ORIENTED_EDGE ( 'NONE', *, *, #7667, .T. ) ; +#20085 = EDGE_CURVE ( 'NONE', #14649, #33159, #8020, .T. ) ; +#20086 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 12.50000000000001200, 4.650848422521016300 ) ) ; +#20087 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20088 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20089 = CARTESIAN_POINT ( 'NONE', ( 4.239894507327795400, 81.93585231025919300, -28.38420446581277500 ) ) ; +#20090 = EDGE_LOOP ( 'NONE', ( #65831, #72996, #10038 ) ) ; +#20091 = CIRCLE ( 'NONE', #20979, 10.00000000000009400 ) ; +#20092 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049504200, 49.19228657120672900, -28.53891855579989600 ) ) ; +#20093 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#20094 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#20095 = CARTESIAN_POINT ( 'NONE', ( -10.07349692871593700, 61.37839075872577200, -28.29547734244344800 ) ) ; +#20096 = VERTEX_POINT ( 'NONE', #66812 ) ; +#20097 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973397000, 74.26498457889739800, -28.70555803803002000 ) ) ; +#20098 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20099 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431400, 49.42298334620763700, -28.20555803802997700 ) ) ; +#20100 = EDGE_CURVE ( 'NONE', #27173, #76021, #74261, .T. ) ; +#20101 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#20102 = EDGE_CURVE ( 'NONE', #70678, #60832, #76164, .T. ) ; +#20103 = CIRCLE ( 'NONE', #46922, 9.500000000000099500 ) ; +#20104 = EDGE_LOOP ( 'NONE', ( #39671, #11177, #10673, #8630, #31012 ) ) ; +#20105 = CIRCLE ( 'NONE', #48791, 9.500000000000129700 ) ; +#20106 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609141700, 70.13716795162640900, -28.48697406221694500 ) ) ; +#20107 = ORIENTED_EDGE ( 'NONE', *, *, #72276, .F. ) ; +#20108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20109 = EDGE_LOOP ( 'NONE', ( #36469, #67341, #38909, #78127 ) ) ; +#20110 = CONICAL_SURFACE ( 'NONE', #49323, 10.50000000000009600, 0.7853981633974500600 ) ; +#20111 = AXIS2_PLACEMENT_3D ( 'NONE', #75174, #37876, #1725 ) ; +#20112 = EDGE_CURVE ( 'NONE', #34405, #34131, #43063, .T. ) ; +#20113 = EDGE_CURVE ( 'NONE', #32539, #10918, #55559, .T. ) ; +#20115 = ORIENTED_EDGE ( 'NONE', *, *, #40192, .F. ) ; +#20114 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#20116 = EDGE_CURVE ( 'NONE', #35889, #65306, #41103, .T. ) ; +#20117 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471819800, 39.13131911501876200, -28.51286550264509100 ) ) ; +#20118 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24361, #67605, #24098, #30638 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207925857400E-007, 0.0008724366121409668000 ), + .UNSPECIFIED. ) ; +#20119 = EDGE_CURVE ( 'NONE', #43752, #13589, #26659, .T. ) ; +#20120 = FACE_OUTER_BOUND ( 'NONE', #75676, .T. ) ; +#20121 = AXIS2_PLACEMENT_3D ( 'NONE', #30990, #43462, #6221 ) ; +#20122 = FACE_OUTER_BOUND ( 'NONE', #63466, .T. ) ; +#20123 = VERTEX_POINT ( 'NONE', #67614 ) ; +#20124 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939082000, 44.91466791010186200, -28.53910738522648700 ) ) ; +#20125 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20126 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310551700, 71.49769010897077200, -28.61774594594320900 ) ) ; +#20127 = ORIENTED_EDGE ( 'NONE', *, *, #76545, .F. ) ; +#20128 = ORIENTED_EDGE ( 'NONE', *, *, #27175, .F. ) ; +#20129 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 56.16666666666667100, 3.794441961969996900 ) ) ; +#20130 = AXIS2_PLACEMENT_3D ( 'NONE', #50459, #13264, #56754 ) ; +#20131 = AXIS2_PLACEMENT_3D ( 'NONE', #74714, #37411, #171 ) ; +#20132 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 21.16666666666668900, 6.794441961969992500 ) ) ; +#20133 = FACE_OUTER_BOUND ( 'NONE', #46930, .T. ) ; +#20134 = VERTEX_POINT ( 'NONE', #11863 ) ; +#20135 = VERTEX_POINT ( 'NONE', #18106 ) ; +#20136 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#20137 = ORIENTED_EDGE ( 'NONE', *, *, #66448, .T. ) ; +#20138 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 58.50000000000000700, -9.258116921287651700 ) ) ; +#20139 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15355, #52580, #21620, #65146 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241261300, 0.0005195704752302474200 ), + .UNSPECIFIED. ) ; +#20140 = ORIENTED_EDGE ( 'NONE', *, *, #12705, .T. ) ; +#20141 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269787300, 80.01262610361139600, -28.29936525552453800 ) ) ; +#20142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20143 = CIRCLE ( 'NONE', #45819, 10.50000000000009600 ) ; +#20144 = AXIS2_PLACEMENT_3D ( 'NONE', #9800, #53304, #16052 ) ; +#20145 = ORIENTED_EDGE ( 'NONE', *, *, #42331, .F. ) ; +#20146 = EDGE_CURVE ( 'NONE', #53446, #60477, #41135, .T. ) ; +#20147 = ORIENTED_EDGE ( 'NONE', *, *, #41992, .T. ) ; +#20148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20149 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142900, 20.46868088498122200, -28.51286550264510900 ) ) ; +#20150 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339058100, 60.13716795162658700, -28.48697406221668200 ) ) ; +#20151 = CARTESIAN_POINT ( 'NONE', ( -10.48827847606239200, 9.414547318481476500, -28.68840635393010900 ) ) ; +#20152 = FACE_OUTER_BOUND ( 'NONE', #55997, .T. ) ; +#20153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20154 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853334200, 38.80869142985029900, -28.37223374938520600 ) ) ; +#20155 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#20156 = EDGE_CURVE ( 'NONE', #719, #2167, #12195, .T. ) ; +#20157 = EDGE_LOOP ( 'NONE', ( #14603, #71902, #56134, #36131 ) ) ; +#20158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20159 = FACE_OUTER_BOUND ( 'NONE', #79286, .T. ) ; +#20160 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455970400, 61.52472935029897600, -28.39317435246130100 ) ) ; +#20161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58847, #46569, #65413, #28158 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794019198200E-007, 0.0009376791149930072700 ), + .UNSPECIFIED. ) ; +#20162 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 35.36071428647298400, -28.36868303842828000 ) ) ; +#20163 = AXIS2_PLACEMENT_3D ( 'NONE', #57718, #64009, #14217 ) ; +#20164 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473025000, 61.58737389638851300, -28.29936525552453800 ) ) ; +#20165 = VECTOR ( 'NONE', #45128, 1000.000000000000000 ) ; +#20166 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20167 = ADVANCED_FACE ( 'NONE', ( #55710, #22648 ), #55619, .F. ) ; +#20168 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#20169 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760600, 31.52620220503713000, -28.70555803802995200 ) ) ; +#20170 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621500, 29.33106028708543200, -28.57333386111662700 ) ) ; +#20171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20172 = ORIENTED_EDGE ( 'NONE', *, *, #62699, .T. ) ; +#20173 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#20174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20175 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701300, 34.11903418172681800, -28.69431509262337700 ) ) ; +#20176 = AXIS2_PLACEMENT_3D ( 'NONE', #65244, #27978, #71457 ) ; +#20177 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 62.00000000000000700, -1.205558038030005300 ) ) ; +#20178 = CIRCLE ( 'NONE', #43249, 9.500000000000099500 ) ; +#20179 = ORIENTED_EDGE ( 'NONE', *, *, #34153, .T. ) ; +#20180 = ORIENTED_EDGE ( 'NONE', *, *, #4163, .T. ) ; +#20181 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 61.43945992495533700, -28.34042301926885800 ) ) ; +#20182 = EDGE_LOOP ( 'NONE', ( #71495, #57068, #18506 ) ) ; +#20183 = CONICAL_SURFACE ( 'NONE', #29049, 10.50000000000009600, 0.7853981633974500600 ) ; +#20184 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#20185 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#20186 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20187 = AXIS2_PLACEMENT_3D ( 'NONE', #46929, #9706, #53207 ) ; +#20188 = CARTESIAN_POINT ( 'NONE', ( -4.720169235843469500, 93.70089248718052500, -28.49656562070742900 ) ) ; +#20189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20190 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20191 = ORIENTED_EDGE ( 'NONE', *, *, #54738, .T. ) ; +#20193 = ADVANCED_FACE ( 'NONE', ( #70310 ), #68142, .T. ) ; +#20192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55263, #5777, #24544, #68060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185642300E-007, 0.001119324643800063500 ), + .UNSPECIFIED. ) ; +#20194 = EDGE_CURVE ( 'NONE', #66911, #48339, #78528, .T. ) ; +#20195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20196 = FACE_OUTER_BOUND ( 'NONE', #75415, .T. ) ; +#20197 = ORIENTED_EDGE ( 'NONE', *, *, #26793, .F. ) ; +#20198 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20199 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 27.16666666666666100, 0.9380355014189834000 ) ) ; +#20200 = ORIENTED_EDGE ( 'NONE', *, *, #79860, .T. ) ; +#20201 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20202 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472986000, 18.13131911501867700, -28.51286550264547200 ) ) ; +#20203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20204 = VECTOR ( 'NONE', #66046, 1000.000000000000000 ) ; +#20205 = CONICAL_SURFACE ( 'NONE', #40729, 10.00000000000009600, 0.7853981633974447300 ) ; +#20206 = ORIENTED_EDGE ( 'NONE', *, *, #72523, .F. ) ; +#20208 = EDGE_CURVE ( 'NONE', #42212, #34264, #64066, .T. ) ; +#20207 = VERTEX_POINT ( 'NONE', #6126 ) ; +#20209 = ORIENTED_EDGE ( 'NONE', *, *, #22725, .F. ) ; +#20210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20211 = ORIENTED_EDGE ( 'NONE', *, *, #6890, .T. ) ; +#20212 = EDGE_CURVE ( 'NONE', #2539, #8848, #53780, .T. ) ; +#20213 = ORIENTED_EDGE ( 'NONE', *, *, #6637, .T. ) ; +#20214 = ORIENTED_EDGE ( 'NONE', *, *, #45417, .F. ) ; +#20215 = EDGE_CURVE ( 'NONE', #62129, #67505, #30473, .T. ) ; +#20216 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714285600, 12.17681279774500400, -28.70555803802994200 ) ) ; +#20217 = CARTESIAN_POINT ( 'NONE', ( 9.438174915909122800, 41.48385710212512100, -28.57719681746179300 ) ) ; +#20218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20219 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, -1.499999999999983100, -9.258116921287651700 ) ) ; +#20220 = EDGE_CURVE ( 'NONE', #6460, #55167, #6094, .T. ) ; +#20221 = CONICAL_SURFACE ( 'NONE', #76197, 10.50000000000009600, 0.7853981633974518300 ) ; +#20222 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994700, 71.07757630314202400, -28.53861367218593200 ) ) ; +#20223 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656713800, 18.35339758437810100, -28.20555803802992800 ) ) ; +#20224 = ORIENTED_EDGE ( 'NONE', *, *, #60435, .F. ) ; +#20225 = ORIENTED_EDGE ( 'NONE', *, *, #60145, .T. ) ; +#20226 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 80.16749699759753900, -28.20555803803030800 ) ) ; +#20227 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29183, #4364, #31716, #75217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476221581271900E-007, 0.0002670039411972095600 ), + .UNSPECIFIED. ) ; +#20228 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103800, 59.94924284854708700, -28.20555803802997700 ) ) ; +#20229 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654719100, 60.27440177985813100, -28.29986836858019600 ) ) ; +#20230 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052151000, 51.31766786975352100, -28.25051428653848600 ) ) ; +#20231 = CIRCLE ( 'NONE', #69367, 9.500000000000099500 ) ; +#20232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20235 = ORIENTED_EDGE ( 'NONE', *, *, #16660, .F. ) ; +#20234 = EDGE_CURVE ( 'NONE', #47514, #35478, #49538, .T. ) ; +#20236 = EDGE_CURVE ( 'NONE', #49905, #41523, #39154, .T. ) ; +#20237 = ADVANCED_FACE ( 'NONE', ( #4135 ), #66437, .T. ) ; +#20238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20239 = AXIS2_PLACEMENT_3D ( 'NONE', #70800, #33540, #77061 ) ; +#20241 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.22294471194858900, -28.20555803802995200 ) ) ; +#20242 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 33.00000000000001400, 3.794441961969998300 ) ) ; +#20243 = CONICAL_SURFACE ( 'NONE', #35430, 10.00000000000009200, 0.7853981633974447300 ) ; +#20244 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#20245 = ORIENTED_EDGE ( 'NONE', *, *, #11668, .F. ) ; +#20246 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999957400, 51.78933626866469800, -28.53923937255195400 ) ) ; +#20247 = EDGE_LOOP ( 'NONE', ( #12787, #40731, #50970 ) ) ; +#20248 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819343900, 59.94924284854693000, -28.20555803802997700 ) ) ; +#20249 = ORIENTED_EDGE ( 'NONE', *, *, #33441, .T. ) ; +#20250 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#20251 = EDGE_CURVE ( 'NONE', #69297, #49674, #35156, .T. ) ; +#20252 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877783500, 18.57332680091183600, -28.37233769390159200 ) ) ; +#20253 = ADVANCED_FACE ( 'NONE', ( #2165 ), #33328, .T. ) ; +#20254 = FACE_OUTER_BOUND ( 'NONE', #13679, .T. ) ; +#20255 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650639700, 49.58087956867520100, -28.30223257055574800 ) ) ; +#20256 = AXIS2_PLACEMENT_3D ( 'NONE', #26172, #69655, #32409 ) ; +#20257 = AXIS2_PLACEMENT_3D ( 'NONE', #11310, #36053, #54799 ) ; +#20258 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20261 = CARTESIAN_POINT ( 'NONE', ( 16.33257079600104000, 44.97013982134319600, -28.62099087449130900 ) ) ; +#20262 = FACE_OUTER_BOUND ( 'NONE', #6414, .T. ) ; +#20263 = ORIENTED_EDGE ( 'NONE', *, *, #71136, .F. ) ; +#20264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20266 = ADVANCED_FACE ( 'NONE', ( #18739 ), #233, .T. ) ; +#20267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20268 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20269 = ORIENTED_EDGE ( 'NONE', *, *, #7921, .F. ) ; +#20270 = CARTESIAN_POINT ( 'NONE', ( 8.272691540716733600, 85.79999999999998300, -28.53979898350160100 ) ) ; +#20271 = ORIENTED_EDGE ( 'NONE', *, *, #513, .F. ) ; +#20272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20273 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992900, 9.418457393421045200, -28.68863412692833100 ) ) ; +#20274 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#20275 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142900, 20.46868088498122200, -28.51286550264510900 ) ) ; +#20277 = ADVANCED_FACE ( 'NONE', ( #68371 ), #47895, .F. ) ; +#20276 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10276, #22788, #72575, #35323 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574818573500E-007, 0.0004669842289003621400 ), + .UNSPECIFIED. ) ; +#20278 = CONICAL_SURFACE ( 'NONE', #66568, 10.00000000000009400, 0.7853981633974447300 ) ; +#20279 = FACE_OUTER_BOUND ( 'NONE', #7155, .T. ) ; +#20280 = AXIS2_PLACEMENT_3D ( 'NONE', #10674, #54175, #16936 ) ; +#20281 = ORIENTED_EDGE ( 'NONE', *, *, #50249, .T. ) ; +#20282 = ORIENTED_EDGE ( 'NONE', *, *, #49012, .T. ) ; +#20283 = ORIENTED_EDGE ( 'NONE', *, *, #26908, .T. ) ; +#20284 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33977, #27749, #9200, #52719 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354275122200E-007, 0.0007670609591624613300 ), + .UNSPECIFIED. ) ; +#20285 = EDGE_LOOP ( 'NONE', ( #71269, #28187, #62025, #26762, #79249 ) ) ; +#20286 = VERTEX_POINT ( 'NONE', #25723 ) ; +#20287 = ORIENTED_EDGE ( 'NONE', *, *, #42488, .T. ) ; +#20288 = ORIENTED_EDGE ( 'NONE', *, *, #17718, .T. ) ; +#20290 = EDGE_LOOP ( 'NONE', ( #20998, #2766, #28440 ) ) ; +#20289 = CARTESIAN_POINT ( 'NONE', ( -17.26470821603528400, 28.31701335568623900, -28.44647976475484400 ) ) ; +#20291 = ORIENTED_EDGE ( 'NONE', *, *, #46020, .F. ) ; +#20292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51172, #7687, #20230, #63765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367409725100, 0.0005556746457764099200 ), + .UNSPECIFIED. ) ; +#20293 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 4.500000000000002700, 2.454695999814380200 ) ) ; +#20294 = AXIS2_PLACEMENT_3D ( 'NONE', #18387, #61919, #24635 ) ; +#20295 = EDGE_LOOP ( 'NONE', ( #11859, #16552, #74159 ) ) ; +#20296 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20297 = EDGE_CURVE ( 'NONE', #17997, #67444, #20658, .T. ) ; +#20298 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24551, #18292, #37033, #80573 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866776315700E-007, 0.001076778502991271100 ), + .UNSPECIFIED. ) ; +#20299 = EDGE_LOOP ( 'NONE', ( #28968, #43272, #15001, #48489 ) ) ; +#20300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20301 = CIRCLE ( 'NONE', #60029, 10.00000000000009600 ) ; +#20302 = ORIENTED_EDGE ( 'NONE', *, *, #27325, .F. ) ; +#20303 = AXIS2_PLACEMENT_3D ( 'NONE', #50073, #12873, #56355 ) ; +#20304 = VERTEX_POINT ( 'NONE', #7175 ) ; +#20305 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310461500, 9.997690108970880700, -28.61774594594333000 ) ) ; +#20306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20307 = EDGE_LOOP ( 'NONE', ( #77571, #42746, #41968, #47742 ) ) ; +#20308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20309 = FACE_OUTER_BOUND ( 'NONE', #50363, .T. ) ; +#20310 = ORIENTED_EDGE ( 'NONE', *, *, #55987, .F. ) ; +#20311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20312 = EDGE_LOOP ( 'NONE', ( #31430, #11405, #42928, #6090 ) ) ; +#20313 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 35.98096581827316200, -28.69431509262337300 ) ) ; +#20314 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701865300, 85.79999999999984100, -28.70555803803014400 ) ) ; +#20315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20316 = EDGE_CURVE ( 'NONE', #36198, #70070, #6195, .T. ) ; +#20317 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390789900, 35.68533208989805400, -28.53910738522644100 ) ) ; +#20318 = CIRCLE ( 'NONE', #960, 10.00000000000009200 ) ; +#20319 = ORIENTED_EDGE ( 'NONE', *, *, #56520, .T. ) ; +#20320 = EDGE_CURVE ( 'NONE', #49688, #9671, #72533, .T. ) ; +#20321 = ORIENTED_EDGE ( 'NONE', *, *, #42335, .F. ) ; +#20322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76960, #21222, #39971, #2673 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367410053600, 0.0005556746457764515500 ), + .UNSPECIFIED. ) ; +#20323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20324 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390812100, 51.46283204837324400, -28.48697406221691300 ) ) ; +#20325 = CARTESIAN_POINT ( 'NONE', ( 3.360497072202814900, 9.932503002402294000, -28.25438406275895900 ) ) ; +#20327 = ORIENTED_EDGE ( 'NONE', *, *, #67390, .T. ) ; +#20326 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290118800, 18.06267502090520700, -28.41043597897433400 ) ) ; +#20328 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20329 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#20330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79932, #36382, #73676, #42635, #5399, #48873 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249978192600, 0.003859526499956385200 ), + .UNSPECIFIED. ) ; +#20331 = EDGE_CURVE ( 'NONE', #60743, #34852, #58052, .T. ) ; +#20332 = ADVANCED_FACE ( 'NONE', ( #64511 ), #14832, .T. ) ; +#20333 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20334 = EDGE_CURVE ( 'NONE', #33069, #13403, #31395, .T. ) ; +#20335 = CARTESIAN_POINT ( 'NONE', ( 15.99167745881024200, 65.79999999999982700, -28.49360982174002600 ) ) ; +#20336 = AXIS2_PLACEMENT_3D ( 'NONE', #80446, #43161, #5922 ) ; +#20337 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655937400, 17.92298334620740600, -28.20555803802993500 ) ) ; +#20338 = CONICAL_SURFACE ( 'NONE', #55132, 10.50000000000009600, 0.7853981633974518300 ) ; +#20339 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 10.33333333333334600, -5.205558038030008400 ) ) ; +#20340 = CARTESIAN_POINT ( 'NONE', ( 15.08138858293179800, 9.837222834136399600, -28.70456437345707100 ) ) ; +#20341 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 30.94069092601377900, -28.35186440610858600 ) ) ; +#20342 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819153800, 89.94924284854653300, -28.20555803803030800 ) ) ; +#20343 = FACE_OUTER_BOUND ( 'NONE', #75588, .T. ) ; +#20344 = ORIENTED_EDGE ( 'NONE', *, *, #69417, .T. ) ; +#20345 = ORIENTED_EDGE ( 'NONE', *, *, #56584, .T. ) ; +#20346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20347 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390822800, 44.91466791010177700, -28.53910738522652900 ) ) ; +#20348 = ADVANCED_FACE ( 'NONE', ( #16797 ), #45944, .T. ) ; +#20349 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972509000, 82.22511094383817500, -28.55192314908427400 ) ) ; +#20350 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20351 = AXIS2_PLACEMENT_3D ( 'NONE', #40164, #64966, #77437 ) ; +#20352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20353 = EDGE_CURVE ( 'NONE', #23119, #1540, #43566, .T. ) ; +#20354 = EDGE_CURVE ( 'NONE', #79978, #33714, #29191, .T. ) ; +#20355 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#20356 = EDGE_CURVE ( 'NONE', #22950, #48735, #14671, .T. ) ; +#20357 = FACE_OUTER_BOUND ( 'NONE', #38363, .T. ) ; +#20358 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466628200, 29.33106028708539300, -28.57333386111660200 ) ) ; +#20359 = ORIENTED_EDGE ( 'NONE', *, *, #7199, .T. ) ; +#20360 = FACE_OUTER_BOUND ( 'NONE', #57200, .T. ) ; +#20361 = ORIENTED_EDGE ( 'NONE', *, *, #36176, .F. ) ; +#20362 = ORIENTED_EDGE ( 'NONE', *, *, #65990, .F. ) ; +#20363 = VERTEX_POINT ( 'NONE', #51738 ) ; +#20364 = ADVANCED_FACE ( 'NONE', ( #62531 ), #12900, .F. ) ; +#20365 = FACE_OUTER_BOUND ( 'NONE', #64715, .T. ) ; +#20366 = ORIENTED_EDGE ( 'NONE', *, *, #79788, .F. ) ; +#20367 = ORIENTED_EDGE ( 'NONE', *, *, #71699, .F. ) ; +#20368 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263300, 38.57379779496234600, -28.70555803802995200 ) ) ; +#20369 = ORIENTED_EDGE ( 'NONE', *, *, #47701, .F. ) ; +#20370 = VERTEX_POINT ( 'NONE', #2257 ) ; +#20371 = VERTEX_POINT ( 'NONE', #76522 ) ; +#20372 = VERTEX_POINT ( 'NONE', #70546 ) ; +#20373 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 41.25489551879205400, -28.37193179497697000 ) ) ; +#20374 = EDGE_CURVE ( 'NONE', #52990, #1549, #192, .T. ) ; +#20375 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818077900, 79.94924284854685900, -28.20555803802997700 ) ) ; +#20376 = AXIS2_PLACEMENT_3D ( 'NONE', #61783, #24505, #68017 ) ; +#20377 = AXIS2_PLACEMENT_3D ( 'NONE', #57674, #63961, #32654 ) ; +#20378 = VERTEX_POINT ( 'NONE', #39534 ) ; +#20379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20380 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20381 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074372300, 10.78032162676582000, -28.55467576046953900 ) ) ; +#20382 = ADVANCED_FACE ( 'NONE', ( #49830 ), #60594, .F. ) ; +#20383 = CIRCLE ( 'NONE', #47942, 10.50000000000009800 ) ; +#20384 = ORIENTED_EDGE ( 'NONE', *, *, #72061, .F. ) ; +#20385 = ORIENTED_EDGE ( 'NONE', *, *, #27580, .T. ) ; +#20386 = ORIENTED_EDGE ( 'NONE', *, *, #56533, .F. ) ; +#20387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47840, #72381, #23134, #66640 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972906729719500E-007, 0.0006651184466333912100 ), + .UNSPECIFIED. ) ; +#20388 = ORIENTED_EDGE ( 'NONE', *, *, #29430, .T. ) ; +#20389 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20390 = CIRCLE ( 'NONE', #42677, 10.00000000000009600 ) ; +#20391 = ADVANCED_FACE ( 'NONE', ( #35317 ), #27502, .T. ) ; +#20392 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 54.00000000000001400, -6.205558038030003100 ) ) ; +#20393 = CARTESIAN_POINT ( 'NONE', ( -2.421266769480915600, 92.13234779781929300, -28.70555803803001300 ) ) ; +#20394 = ORIENTED_EDGE ( 'NONE', *, *, #72554, .T. ) ; +#20395 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#20396 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 19.00000000000001800, -9.205558038030005700 ) ) ; +#20397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5881, #49613, #37380, #137 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207918752900E-007, 0.0008724366121410557100 ), + .UNSPECIFIED. ) ; +#20398 = AXIS2_PLACEMENT_3D ( 'NONE', #57745, #20497, #64033 ) ; +#20399 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.15857157145701000, -28.20555803802996700 ) ) ; +#20400 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.23796787468680200, -28.38801640354855800 ) ) ; +#20401 = CIRCLE ( 'NONE', #48849, 9.500000000000099500 ) ; +#20402 = ORIENTED_EDGE ( 'NONE', *, *, #26209, .F. ) ; +#20403 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488122900, 61.99560977511662700, -28.70555803802997700 ) ) ; +#20404 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 56.33333333333335000, 8.320721403598817300 ) ) ; +#20405 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488291200, 81.99560977511637800, -28.70555803803014400 ) ) ; +#20406 = ORIENTED_EDGE ( 'NONE', *, *, #56534, .T. ) ; +#20407 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 70.16054007504466500, -28.34042301926881200 ) ) ; +#20408 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.84510448120794000, -28.37193179497693400 ) ) ; +#20409 = EDGE_LOOP ( 'NONE', ( #6899, #51381, #61731 ) ) ; +#20410 = AXIS2_PLACEMENT_3D ( 'NONE', #23445, #10949, #29734 ) ; +#20411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10929, #17181, #35937, #79473 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521666181600, 0.0009492057883285821600 ), + .UNSPECIFIED. ) ; +#20412 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 85.79999999999996900, -28.70555803802997700 ) ) ; +#20413 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136827400, 31.17041185698243700, -28.27321389036145800 ) ) ; +#20414 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999999100, 87.22261628933272000, -28.70555803802997700 ) ) ; +#20415 = EDGE_CURVE ( 'NONE', #69179, #17884, #20697, .T. ) ; +#20416 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#20417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20418 = AXIS2_PLACEMENT_3D ( 'NONE', #68155, #24919, #68424 ) ; +#20419 = FACE_OUTER_BOUND ( 'NONE', #53695, .T. ) ; +#20420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20421 = CARTESIAN_POINT ( 'NONE', ( 10.93543899802654100, 51.50961459723716700, -28.29483879644663000 ) ) ; +#20422 = CARTESIAN_POINT ( 'NONE', ( 3.031785615621770200, 51.31767869357340600, -28.25052235028430700 ) ) ; +#20423 = FACE_OUTER_BOUND ( 'NONE', #17068, .T. ) ; +#20424 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#20425 = ORIENTED_EDGE ( 'NONE', *, *, #16899, .F. ) ; +#20426 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063449500, 41.59789380924871700, -28.25343951603346300 ) ) ; +#20427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20428 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000076400, 63.42856308690557700, -28.36981695106809600 ) ) ; +#20429 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459565500, 62.51973550835663900, -28.70555803803005200 ) ) ; +#20430 = CARTESIAN_POINT ( 'NONE', ( 9.875008334730189600, 60.01262610361141000, -28.29936525552456000 ) ) ; +#20431 = EDGE_LOOP ( 'NONE', ( #60935, #57432, #65998 ) ) ; +#20433 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72219, #28724, #47136, #34948, #78471, #41173 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082187800, 0.004114855318164375600 ), + .UNSPECIFIED. ) ; +#20432 = CARTESIAN_POINT ( 'NONE', ( -8.939071942967194300, 10.00000000000006900, -28.70555803802998100 ) ) ; +#20434 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20435 = CIRCLE ( 'NONE', #11777, 9.500000000000099500 ) ; +#20436 = EDGE_LOOP ( 'NONE', ( #48045, #67369, #71949, #69796 ) ) ; +#20437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20438 = CARTESIAN_POINT ( 'NONE', ( 4.720904428263970900, 61.50050415885225200, -28.63287458792251500 ) ) ; +#20439 = CONICAL_SURFACE ( 'NONE', #72931, 10.00000000000009400, 0.7853981633974447300 ) ; +#20440 = EDGE_LOOP ( 'NONE', ( #14125, #57923, #25394 ) ) ; +#20441 = EDGE_CURVE ( 'NONE', #75158, #52379, #66530, .T. ) ; +#20442 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 59.83333333333335000, -3.349151577478984600 ) ) ; +#20443 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20444 = CARTESIAN_POINT ( 'NONE', ( 6.493998623941019400E-015, 46.96443389862715600, -28.54207364681942500 ) ) ; +#20445 = FACE_OUTER_BOUND ( 'NONE', #62591, .T. ) ; +#20446 = EDGE_CURVE ( 'NONE', #55691, #31405, #52029, .T. ) ; +#20447 = ORIENTED_EDGE ( 'NONE', *, *, #63588, .F. ) ; +#20448 = EDGE_LOOP ( 'NONE', ( #6511, #17641, #75800, #60882 ) ) ; +#20450 = EDGE_LOOP ( 'NONE', ( #4114, #25381, #39076, #50326, #46946 ) ) ; +#20449 = PLANE ( 'NONE', #77665 ) ; +#20451 = VERTEX_POINT ( 'NONE', #58571 ) ; +#20452 = ORIENTED_EDGE ( 'NONE', *, *, #55043, .F. ) ; +#20453 = ORIENTED_EDGE ( 'NONE', *, *, #32016, .T. ) ; +#20454 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20455 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654557500, 80.27440177985818100, -28.29986836858018500 ) ) ; +#20456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20457 = EDGE_CURVE ( 'NONE', #30379, #36904, #37573, .T. ) ; +#20458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20459 = EDGE_CURVE ( 'NONE', #12346, #52565, #23158, .T. ) ; +#20461 = ORIENTED_EDGE ( 'NONE', *, *, #22777, .F. ) ; +#20460 = AXIS2_PLACEMENT_3D ( 'NONE', #17547, #61351, #24077 ) ; +#20462 = FACE_OUTER_BOUND ( 'NONE', #75913, .T. ) ; +#20463 = ORIENTED_EDGE ( 'NONE', *, *, #14369, .F. ) ; +#20464 = VERTEX_POINT ( 'NONE', #52844 ) ; +#20465 = EDGE_CURVE ( 'NONE', #13617, #43734, #29477, .T. ) ; +#20466 = ORIENTED_EDGE ( 'NONE', *, *, #12588, .F. ) ; +#20467 = ADVANCED_FACE ( 'NONE', ( #77116 ), #42057, .T. ) ; +#20468 = ORIENTED_EDGE ( 'NONE', *, *, #15277, .T. ) ; +#20469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20470 = ADVANCED_FACE ( 'NONE', ( #79088 ), #8945, .T. ) ; +#20471 = FACE_OUTER_BOUND ( 'NONE', #8280, .T. ) ; +#20472 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 25.00000000000000700, -1.205558038030005300 ) ) ; +#20473 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#20474 = ORIENTED_EDGE ( 'NONE', *, *, #19858, .T. ) ; +#20475 = EDGE_CURVE ( 'NONE', #44565, #4982, #8657, .T. ) ; +#20476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20477 = EDGE_CURVE ( 'NONE', #69811, #54691, #75003, .T. ) ; +#20478 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35014, #47454, #4238, #47739 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569884623000E-007, 0.0004669842289003373100 ), + .UNSPECIFIED. ) ; +#20479 = EDGE_CURVE ( 'NONE', #24198, #55807, #60553, .T. ) ; +#20480 = ORIENTED_EDGE ( 'NONE', *, *, #11046, .T. ) ; +#20481 = ADVANCED_FACE ( 'NONE', ( #43983 ), #56651, .F. ) ; +#20482 = AXIS2_PLACEMENT_3D ( 'NONE', #42499, #73537, #79791 ) ; +#20483 = CIRCLE ( 'NONE', #1910, 10.50000000000009600 ) ; +#20485 = EDGE_LOOP ( 'NONE', ( #60595, #17459, #66858, #32593 ) ) ; +#20484 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 59.94924284854741400, -28.20555803802997700 ) ) ; +#20486 = ORIENTED_EDGE ( 'NONE', *, *, #24285, .T. ) ; +#20487 = AXIS2_PLACEMENT_3D ( 'NONE', #58232, #21000, #64531 ) ; +#20488 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384643800, 60.79999999999999700, -28.55171188418380600 ) ) ; +#20489 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, -3.666666666666665200, 4.294441961970000500 ) ) ; +#20490 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32451, #38675, #13972, #57473 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185222555501900E-007, 0.0006654852833086721500 ), + .UNSPECIFIED. ) ; +#20491 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000500500, 70.69949493661175700, -28.70555803803014400 ) ) ; +#20492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20493 = FACE_OUTER_BOUND ( 'NONE', #64918, .T. ) ; +#20494 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844501000, 65.46616414991841300, -28.37247596307076200 ) ) ; +#20495 = VERTEX_POINT ( 'NONE', #72188 ) ; +#20496 = VERTEX_POINT ( 'NONE', #34921 ) ; +#20497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20499 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20500 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 60.34267608797551900, -28.20555803803047800 ) ) ; +#20501 = AXIS2_PLACEMENT_3D ( 'NONE', #70661, #76921, #51861 ) ; +#20502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1374, #38621, #13922, #57421 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061230500, 0.004414112765716553900 ), + .UNSPECIFIED. ) ; +#20503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20504 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.44142842854296700, -28.20555803802994200 ) ) ; +#20505 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000021300, 81.25489551879186900, -28.37193179497714000 ) ) ; +#20506 = CONICAL_SURFACE ( 'NONE', #38761, 10.50000000000009800, 0.7853981633974500600 ) ; +#20507 = VERTEX_POINT ( 'NONE', #78440 ) ; +#20508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20509 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344611100, 49.42298334620778600, -28.20555803802997400 ) ) ; +#20510 = ORIENTED_EDGE ( 'NONE', *, *, #66131, .T. ) ; +#20511 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 30.83333333333334300, -6.205558038030004800 ) ) ; +#20512 = CARTESIAN_POINT ( 'NONE', ( 10.62849472960780500, 61.43250300240195800, -28.25053119339303000 ) ) ; +#20514 = EDGE_CURVE ( 'NONE', #25185, #33691, #58617, .T. ) ; +#20513 = ORIENTED_EDGE ( 'NONE', *, *, #39735, .F. ) ; +#20515 = CIRCLE ( 'NONE', #56317, 10.50000000000009200 ) ; +#20516 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69986, #26517, #1708, #45206 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850289500, 0.0007596411030283557300 ), + .UNSPECIFIED. ) ; +#20518 = ORIENTED_EDGE ( 'NONE', *, *, #3746, .F. ) ; +#20519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20520 = AXIS2_PLACEMENT_3D ( 'NONE', #68701, #31463, #74965 ) ; +#20521 = ORIENTED_EDGE ( 'NONE', *, *, #8814, .F. ) ; +#20522 = EDGE_LOOP ( 'NONE', ( #1081, #22217, #42699 ) ) ; +#20523 = ORIENTED_EDGE ( 'NONE', *, *, #38150, .F. ) ; +#20524 = CARTESIAN_POINT ( 'NONE', ( 1.272691540716733200, 75.79999999999999700, -28.53979898350160500 ) ) ; +#20525 = ORIENTED_EDGE ( 'NONE', *, *, #72441, .T. ) ; +#20526 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.78933626866496800, -28.53923937255172300 ) ) ; +#20527 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 89.91070809551058600, -28.20555803802997700 ) ) ; +#20528 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472516600, 14.04999999999928800, -28.20555803803042500 ) ) ; +#20529 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153688600, 80.79999999999999700, -28.55171188418376700 ) ) ; +#20530 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 47.42318720225497200, -28.70555803802996700 ) ) ; +#20531 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#20533 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14935, #14670, #77215, #52431 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859891879300E-007, 0.0008759659331885309300 ), + .UNSPECIFIED. ) ; +#20532 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849321000, 20.32033471810044000, -28.30868034705250100 ) ) ; +#20534 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20536 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#20537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20538 = CIRCLE ( 'NONE', #73969, 10.00000000000009200 ) ; +#20539 = AXIS2_PLACEMENT_3D ( 'NONE', #13389, #63425, #13655 ) ; +#20540 = ORIENTED_EDGE ( 'NONE', *, *, #53929, .T. ) ; +#20541 = ORIENTED_EDGE ( 'NONE', *, *, #1143, .T. ) ; +#20542 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#20543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20544 = EDGE_LOOP ( 'NONE', ( #75870, #64004, #45756 ) ) ; +#20545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20546 = ORIENTED_EDGE ( 'NONE', *, *, #52550, .F. ) ; +#20547 = ORIENTED_EDGE ( 'NONE', *, *, #52399, .F. ) ; +#20548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20549 = ORIENTED_EDGE ( 'NONE', *, *, #59173, .F. ) ; +#20550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20551 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899326700, 41.97636006919908900, -28.38670679782168400 ) ) ; +#20552 = FACE_OUTER_BOUND ( 'NONE', #18422, .T. ) ; +#20553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20554 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 51.25732391202386400, -28.20555803803014400 ) ) ; +#20555 = ORIENTED_EDGE ( 'NONE', *, *, #12014, .F. ) ; +#20556 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823703100, 48.69543746431602900, -28.61277292027075300 ) ) ; +#20557 = ORIENTED_EDGE ( 'NONE', *, *, #22376, .T. ) ; +#20558 = EDGE_CURVE ( 'NONE', #780, #77640, #10945, .T. ) ; +#20559 = FACE_OUTER_BOUND ( 'NONE', #43037, .T. ) ; +#20560 = ORIENTED_EDGE ( 'NONE', *, *, #12984, .F. ) ; +#20561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20562 = ADVANCED_FACE ( 'NONE', ( #73228 ), #71267, .T. ) ; +#20563 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 2.333333333333339300, -5.535685056952199400 ) ) ; +#20564 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 80.79999999999998300, -28.45034744217088700 ) ) ; +#20565 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7859, #70149, #8114, #51620, #14407, #57928 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409446300, 0.003857515824818892600 ), + .UNSPECIFIED. ) ; +#20566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20567 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#20568 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#20569 = EDGE_CURVE ( 'NONE', #69763, #3005, #46047, .T. ) ; +#20570 = EDGE_CURVE ( 'NONE', #3836, #72721, #31639, .T. ) ; +#20571 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818086000, 71.65075715145327700, -28.20555803803047800 ) ) ; +#20572 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 12.87738371066728000, -28.70555803802994200 ) ) ; +#20573 = EDGE_LOOP ( 'NONE', ( #33305, #74962, #76525, #43737 ) ) ; +#20574 = ORIENTED_EDGE ( 'NONE', *, *, #22948, .F. ) ; +#20575 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199500, 60.34267608797601000, -28.20555803802997700 ) ) ; +#20576 = ORIENTED_EDGE ( 'NONE', *, *, #25113, .T. ) ; +#20577 = AXIS2_PLACEMENT_3D ( 'NONE', #61448, #24169, #67685 ) ; +#20578 = EDGE_CURVE ( 'NONE', #50416, #28926, #7020, .T. ) ; +#20579 = EDGE_CURVE ( 'NONE', #58834, #29329, #17168, .T. ) ; +#20580 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#20581 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856429500, 19.54666532841557500, -28.65803483468292600 ) ) ; +#20582 = EDGE_CURVE ( 'NONE', #17334, #28951, #2662, .T. ) ; +#20583 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813900, 69.60439022488338900, -28.70555803802997700 ) ) ; +#20584 = ADVANCED_FACE ( 'NONE', ( #51786 ), #21648, .F. ) ; +#20585 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20587 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20588 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865853100, 18.41272737910570000, -28.28853693900640200 ) ) ; +#20589 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223644500, 51.76592160028475600, -28.37510699173787300 ) ) ; +#20590 = FACE_OUTER_BOUND ( 'NONE', #79990, .T. ) ; +#20591 = ORIENTED_EDGE ( 'NONE', *, *, #13449, .T. ) ; +#20592 = ORIENTED_EDGE ( 'NONE', *, *, #21522, .T. ) ; +#20593 = AXIS2_PLACEMENT_3D ( 'NONE', #20767, #64310, #27035 ) ; +#20594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20595 = CIRCLE ( 'NONE', #69317, 9.500000000000099500 ) ; +#20596 = ORIENTED_EDGE ( 'NONE', *, *, #12121, .F. ) ; +#20597 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 80.16749699759753900, -28.20555803803030800 ) ) ; +#20598 = VERTEX_POINT ( 'NONE', #60745 ) ; +#20599 = PLANE ( 'NONE', #68955 ) ; +#20600 = CARTESIAN_POINT ( 'NONE', ( 11.30404578338976400, 60.13716795162665100, -28.48697406221639000 ) ) ; +#20601 = ORIENTED_EDGE ( 'NONE', *, *, #36953, .F. ) ; +#20602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20603 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20604 = AXIS2_PLACEMENT_3D ( 'NONE', #10940, #48153, #23442 ) ; +#20605 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20606 = AXIS2_PLACEMENT_3D ( 'NONE', #65261, #28002, #71485 ) ; +#20607 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68824, #75091, #50288, #13088 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001492013864175116800 ), + .UNSPECIFIED. ) ; +#20608 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378067200, 90.82516071402385200, -28.57108397021908900 ) ) ; +#20609 = AXIS2_PLACEMENT_3D ( 'NONE', #40808, #3534, #47041 ) ; +#20610 = CIRCLE ( 'NONE', #2002, 10.50000000000009600 ) ; +#20611 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#20612 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20613 = ORIENTED_EDGE ( 'NONE', *, *, #66242, .T. ) ; +#20614 = CIRCLE ( 'NONE', #1960, 10.00000000000009400 ) ; +#20615 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999941800, 61.96823913367190800, -28.70555803803014400 ) ) ; +#20616 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 8.166666666666689200, 0.9380355014189834000 ) ) ; +#20617 = ORIENTED_EDGE ( 'NONE', *, *, #61348, .T. ) ; +#20618 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 82.18315603019286200, -28.70555803802999500 ) ) ; +#20619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20620 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537342700, 81.39409401757612300, -28.39369363572373600 ) ) ; +#20621 = ORIENTED_EDGE ( 'NONE', *, *, #64972, .T. ) ; +#20622 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61874, #6099, #24866, #68379 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625876390689000E-007, 0.0002930369617398799500 ), + .UNSPECIFIED. ) ; +#20623 = EDGE_LOOP ( 'NONE', ( #77785, #11560, #33881, #49822 ) ) ; +#20624 = ORIENTED_EDGE ( 'NONE', *, *, #52468, .T. ) ; +#20625 = ORIENTED_EDGE ( 'NONE', *, *, #6080, .F. ) ; +#20626 = CARTESIAN_POINT ( 'NONE', ( 3.523450749058308200, 9.410658797990173200, -28.68817753164652400 ) ) ; +#20627 = CONICAL_SURFACE ( 'NONE', #26376, 10.50000000000009600, 0.7853981633974500600 ) ; +#20628 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#20629 = AXIS2_PLACEMENT_3D ( 'NONE', #51209, #57520, #14008 ) ; +#20630 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 62.18315603019262700, -28.70555803803024400 ) ) ; +#20631 = EDGE_CURVE ( 'NONE', #55188, #44982, #69011, .T. ) ; +#20632 = CARTESIAN_POINT ( 'NONE', ( -17.70937642622677200, 81.64956494791141500, -28.33395564275757300 ) ) ; +#20633 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#20634 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 22.67681279774499400, -28.70555803802995200 ) ) ; +#20635 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20637 = FACE_OUTER_BOUND ( 'NONE', #50357, .T. ) ; +#20638 = ORIENTED_EDGE ( 'NONE', *, *, #78318, .F. ) ; +#20639 = VERTEX_POINT ( 'NONE', #73246 ) ; +#20640 = EDGE_CURVE ( 'NONE', #32703, #80592, #75167, .T. ) ; +#20641 = AXIS2_PLACEMENT_3D ( 'NONE', #32425, #38645, #38383 ) ; +#20642 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20645 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#20646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20648 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69740, #26267, #1462, #44943 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966463300, 0.0007670610367944959200 ), + .UNSPECIFIED. ) ; +#20649 = ADVANCED_FACE ( 'NONE', ( #25553 ), #54465, .T. ) ; +#20650 = AXIS2_PLACEMENT_3D ( 'NONE', #47906, #10681, #54180 ) ; +#20651 = ORIENTED_EDGE ( 'NONE', *, *, #37955, .T. ) ; +#20652 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048100, 18.69949493661160400, -28.70555803803025800 ) ) ; +#20653 = ORIENTED_EDGE ( 'NONE', *, *, #44190, .T. ) ; +#20654 = ADVANCED_FACE ( 'NONE', ( #54705 ), #69302, .T. ) ; +#20655 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 51.83333333333332900, 3.794441961969996900 ) ) ; +#20656 = AXIS2_PLACEMENT_3D ( 'NONE', #71339, #12289, #55771 ) ; +#20657 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#20658 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25991, #63254, #38438, #1197 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207975616800E-007, 0.0008724366121409723300 ), + .UNSPECIFIED. ) ; +#20659 = CARTESIAN_POINT ( 'NONE', ( 11.72090442826396000, 71.50050415885209500, -28.63287458792268200 ) ) ; +#20660 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 16.83333333333335000, 6.794441961969992500 ) ) ; +#20661 = CONICAL_SURFACE ( 'NONE', #31437, 10.00000000000009400, 0.7853981633974447300 ) ; +#20662 = ORIENTED_EDGE ( 'NONE', *, *, #55825, .T. ) ; +#20663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20664 = CONICAL_SURFACE ( 'NONE', #53500, 10.50000000000009600, 0.7853981633974482800 ) ; +#20666 = EDGE_CURVE ( 'NONE', #63443, #8428, #38138, .T. ) ; +#20665 = ORIENTED_EDGE ( 'NONE', *, *, #39989, .T. ) ; +#20667 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890734800, 18.47143078992715500, -28.37063977681164300 ) ) ; +#20668 = ADVANCED_FACE ( 'NONE', ( #40110 ), #67368, .F. ) ; +#20669 = ORIENTED_EDGE ( 'NONE', *, *, #38640, .F. ) ; +#20670 = CONICAL_SURFACE ( 'NONE', #40280, 10.50000000000009600, 0.7853981633974500600 ) ; +#20671 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 54.16666666666666400, -12.20555803803000000 ) ) ; +#20672 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153558000, 80.79999999999984100, -28.55171188418395500 ) ) ; +#20673 = ORIENTED_EDGE ( 'NONE', *, *, #20514, .F. ) ; +#20674 = EDGE_LOOP ( 'NONE', ( #24270, #5706, #76561, #20302 ) ) ; +#20675 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 51.35277818615383400, -28.70555803803016200 ) ) ; +#20676 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819343900, 59.94924284854693000, -28.20555803802997700 ) ) ; +#20677 = ORIENTED_EDGE ( 'NONE', *, *, #20212, .T. ) ; +#20678 = FACE_OUTER_BOUND ( 'NONE', #17726, .T. ) ; +#20679 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609203600, 25.18533208989819300, -28.53910738522650400 ) ) ; +#20680 = CARTESIAN_POINT ( 'NONE', ( 4.397448087263119200, 90.86668251344229900, -28.60300612529352500 ) ) ; +#20681 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#20682 = ADVANCED_FACE ( 'NONE', ( #23593 ), #34277, .F. ) ; +#20683 = CARTESIAN_POINT ( 'NONE', ( -2.997971278275732400, 20.31091476818473000, -28.25432823872344600 ) ) ; +#20684 = PLANE ( 'NONE', #43089 ) ; +#20685 = ORIENTED_EDGE ( 'NONE', *, *, #76898, .T. ) ; +#20686 = ORIENTED_EDGE ( 'NONE', *, *, #25956, .T. ) ; +#20687 = EDGE_CURVE ( 'NONE', #50735, #79056, #54544, .T. ) ; +#20688 = CIRCLE ( 'NONE', #2443, 10.00000000000009400 ) ; +#20689 = EDGE_LOOP ( 'NONE', ( #33123, #10056, #14737, #76881 ) ) ; +#20690 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856768900, 53.67681279774504300, -28.70555803802997700 ) ) ; +#20691 = ORIENTED_EDGE ( 'NONE', *, *, #76734, .T. ) ; +#20692 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#20693 = EDGE_LOOP ( 'NONE', ( #5919, #76131, #21202 ) ) ; +#20694 = VERTEX_POINT ( 'NONE', #55258 ) ; +#20695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44166, #25478, #25750, #69249 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632938723500E-007, 0.0008082706238600371300 ), + .UNSPECIFIED. ) ; +#20696 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 57.94142842854297700, -28.20555803802997700 ) ) ; +#20697 = CIRCLE ( 'NONE', #65371, 10.50000000000009200 ) ; +#20698 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116571500, 39.20564881207769000, -28.41114655922288900 ) ) ; +#20699 = CARTESIAN_POINT ( 'NONE', ( 16.59220857876173100, 9.256614811269354700, -28.57803044894345800 ) ) ; +#20700 = ORIENTED_EDGE ( 'NONE', *, *, #22977, .T. ) ; +#20701 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#20702 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20703 = FACE_OUTER_BOUND ( 'NONE', #26338, .T. ) ; +#20704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20705 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 78.17143691309408400, -28.36981695106780800 ) ) ; +#20706 = AXIS2_PLACEMENT_3D ( 'NONE', #28776, #72262, #35001 ) ; +#20707 = EDGE_CURVE ( 'NONE', #28971, #46344, #50777, .T. ) ; +#20708 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701863500, 55.79999999999997600, -28.70555803802997700 ) ) ; +#20709 = EDGE_CURVE ( 'NONE', #34422, #69758, #40077, .T. ) ; +#20710 = ORIENTED_EDGE ( 'NONE', *, *, #36874, .F. ) ; +#20711 = EDGE_CURVE ( 'NONE', #19644, #22912, #5073, .T. ) ; +#20712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20713 = AXIS2_PLACEMENT_3D ( 'NONE', #65028, #59011, #77511 ) ; +#20714 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 57.66666666666667100, 2.794441961969992100 ) ) ; +#20715 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 34.73928571352701100, -28.36868303842826900 ) ) ; +#20716 = VECTOR ( 'NONE', #39890, 1000.000000000000000 ) ; +#20717 = ORIENTED_EDGE ( 'NONE', *, *, #42586, .F. ) ; +#20718 = CARTESIAN_POINT ( 'NONE', ( -1.899855986823691800E-013, 54.13556610137271700, -28.54207364681951400 ) ) ; +#20719 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 73.67681279774444600, -28.70555803803047500 ) ) ; +#20720 = AXIS2_PLACEMENT_3D ( 'NONE', #65826, #28583, #72091 ) ; +#20721 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#20722 = CARTESIAN_POINT ( 'NONE', ( 16.63912857669162900, 19.14521310961676500, -28.57032374330296400 ) ) ; +#20723 = AXIS2_PLACEMENT_3D ( 'NONE', #32678, #76191, #38912 ) ; +#20724 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#20725 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 65.79999999999998300, -28.20555803802997700 ) ) ; +#20726 = EDGE_CURVE ( 'NONE', #56981, #37840, #3110, .T. ) ; +#20727 = AXIS2_PLACEMENT_3D ( 'NONE', #65268, #71491, #21732 ) ; +#20728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20729 = EDGE_LOOP ( 'NONE', ( #78013, #59464, #15817, #58166 ) ) ; +#20730 = CARTESIAN_POINT ( 'NONE', ( 0.8996655518395186800, 80.79999999999999700, -28.20555803802989600 ) ) ; +#20731 = ORIENTED_EDGE ( 'NONE', *, *, #15103, .T. ) ; +#20732 = EDGE_CURVE ( 'NONE', #4580, #38941, #25657, .T. ) ; +#20733 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 22.83333333333335700, -3.349151577478984600 ) ) ; +#20734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20735 = AXIS2_PLACEMENT_3D ( 'NONE', #5889, #43123, #74169 ) ; +#20736 = AXIS2_PLACEMENT_3D ( 'NONE', #20657, #64203, #26929 ) ; +#20737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20738 = ORIENTED_EDGE ( 'NONE', *, *, #10707, .F. ) ; +#20739 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 71.43250300240197200, -28.20555803803047800 ) ) ; +#20740 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70849, #14831, #21647, #65166 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417461568406100E-007, 0.0004435563144343983900 ), + .UNSPECIFIED. ) ; +#20741 = ADVANCED_FACE ( 'NONE', ( #52752 ), #32322, .T. ) ; +#20742 = FACE_OUTER_BOUND ( 'NONE', #11876, .T. ) ; +#20743 = ORIENTED_EDGE ( 'NONE', *, *, #29216, .T. ) ; +#20744 = CONICAL_SURFACE ( 'NONE', #58139, 10.00000000000009400, 0.7853981633974447300 ) ; +#20745 = ORIENTED_EDGE ( 'NONE', *, *, #39228, .F. ) ; +#20746 = FACE_OUTER_BOUND ( 'NONE', #17660, .T. ) ; +#20747 = ORIENTED_EDGE ( 'NONE', *, *, #56330, .F. ) ; +#20748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20749 = ORIENTED_EDGE ( 'NONE', *, *, #33564, .T. ) ; +#20750 = ADVANCED_FACE ( 'NONE', ( #36221 ), #80013, .T. ) ; +#20751 = ORIENTED_EDGE ( 'NONE', *, *, #37006, .T. ) ; +#20752 = CIRCLE ( 'NONE', #62929, 10.00000000000009200 ) ; +#20753 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20754 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20755 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571433300, 28.57141756547892100, -28.70555803802994200 ) ) ; +#20756 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 66.33333333333334300, -5.205558038030008400 ) ) ; +#20757 = VERTEX_POINT ( 'NONE', #30 ) ; +#20758 = AXIS2_PLACEMENT_3D ( 'NONE', #14083, #57587, #20333 ) ; +#20759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20760 = FACE_OUTER_BOUND ( 'NONE', #55179, .T. ) ; +#20761 = ORIENTED_EDGE ( 'NONE', *, *, #1695, .T. ) ; +#20762 = ADVANCED_FACE ( 'NONE', ( #19686 ), #46879, .F. ) ; +#20763 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718937400, 90.46231468379673400, -28.37082013777818500 ) ) ; +#20764 = ORIENTED_EDGE ( 'NONE', *, *, #10683, .F. ) ; +#20765 = ORIENTED_EDGE ( 'NONE', *, *, #51637, .T. ) ; +#20766 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#20767 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#20768 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .T. ) ; +#20769 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 60.34267608797601700, -28.20555803802997700 ) ) ; +#20770 = CONICAL_SURFACE ( 'NONE', #74730, 10.50000000000009600, 0.7853981633974500600 ) ; +#20771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20772 = AXIS2_PLACEMENT_3D ( 'NONE', #60381, #23112, #66620 ) ; +#20773 = ORIENTED_EDGE ( 'NONE', *, *, #47468, .T. ) ; +#20774 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609421500, 81.46283204837340000, -28.48697406221668500 ) ) ; +#20775 = ADVANCED_FACE ( 'NONE', ( #48838 ), #13836, .F. ) ; +#20776 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20777 = EDGE_CURVE ( 'NONE', #33247, #71807, #11193, .T. ) ; +#20778 = ORIENTED_EDGE ( 'NONE', *, *, #49465, .T. ) ; +#20779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20780 = EDGE_LOOP ( 'NONE', ( #26180, #34185, #67707, #31149 ) ) ; +#20781 = CARTESIAN_POINT ( 'NONE', ( -19.77439149588265700, 0.4512170082351554800, -21.73852730698778400 ) ) ; +#20782 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20783 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 28.66666666666668600, 3.124568980892192800 ) ) ; +#20784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20785 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 70.90050506338820900, -28.70555803802997700 ) ) ; +#20786 = ORIENTED_EDGE ( 'NONE', *, *, #63896, .T. ) ; +#20787 = CIRCLE ( 'NONE', #55496, 9.500000000000101300 ) ; +#20788 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851492000, 34.09761904761904800, -28.70555803802995200 ) ) ; +#20789 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 47.66545993132820100, -28.70555803802998800 ) ) ; +#20790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52702, #33962, #28016, #71498 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794188003900E-007, 0.0009376791149930483600 ), + .UNSPECIFIED. ) ; +#20791 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000012600, 67.22261628933235000, -28.70555803803047500 ) ) ; +#20792 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#20793 = ADVANCED_FACE ( 'NONE', ( #30404 ), #61535, .F. ) ; +#20794 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#20795 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20796 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.44142842854297000, -28.20555803802996700 ) ) ; +#20797 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906698700, 71.67036336027378200, -28.27338767626476800 ) ) ; +#20798 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999949400, 31.46823913367205300, -28.70555803802996700 ) ) ; +#20799 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#20800 = CARTESIAN_POINT ( 'NONE', ( 9.279830764156534100, 93.70089248718052500, -28.49656562070742900 ) ) ; +#20801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20802 = FACE_OUTER_BOUND ( 'NONE', #45833, .T. ) ; +#20803 = EDGE_CURVE ( 'NONE', #35494, #9664, #77485, .T. ) ; +#20804 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541607400, 41.01125751638927900, -28.53740755999536600 ) ) ; +#20805 = EDGE_CURVE ( 'NONE', #46711, #49697, #1155, .T. ) ; +#20806 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310457600, 28.60230989102909800, -28.61774594594333400 ) ) ; +#20807 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 70.90033558196090300, -28.70555803803014400 ) ) ; +#20808 = ORIENTED_EDGE ( 'NONE', *, *, #8501, .F. ) ; +#20809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20810 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20811 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474188300, 38.73827450271715400, -28.47230003642277300 ) ) ; +#20812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20813 = EDGE_LOOP ( 'NONE', ( #44427, #28209, #8842, #14681 ) ) ; +#20814 = EDGE_CURVE ( 'NONE', #70776, #39868, #63040, .T. ) ; +#20815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20816 = EDGE_CURVE ( 'NONE', #43689, #4729, #65450, .T. ) ; +#20817 = CONICAL_SURFACE ( 'NONE', #71456, 10.00000000000009400, 0.7853981633974447300 ) ; +#20818 = ORIENTED_EDGE ( 'NONE', *, *, #70939, .T. ) ; +#20819 = AXIS2_PLACEMENT_3D ( 'NONE', #63805, #70024, #20267 ) ; +#20820 = CONICAL_SURFACE ( 'NONE', #41930, 10.00000000000009400, 0.7853981633974447300 ) ; +#20821 = ORIENTED_EDGE ( 'NONE', *, *, #30361, .F. ) ; +#20822 = ORIENTED_EDGE ( 'NONE', *, *, #37006, .F. ) ; +#20823 = CIRCLE ( 'NONE', #28796, 10.00000000000009600 ) ; +#20824 = EDGE_LOOP ( 'NONE', ( #23745, #15508, #46529 ) ) ; +#20825 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20826 = ORIENTED_EDGE ( 'NONE', *, *, #23774, .F. ) ; +#20827 = ORIENTED_EDGE ( 'NONE', *, *, #12405, .T. ) ; +#20828 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 0.1666666666666696000, 3.794441961969996900 ) ) ; +#20829 = AXIS2_PLACEMENT_3D ( 'NONE', #79488, #55239, #42720 ) ; +#20830 = EDGE_CURVE ( 'NONE', #5185, #63397, #48522, .T. ) ; +#20831 = EDGE_CURVE ( 'NONE', #43614, #25185, #15778, .T. ) ; +#20832 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310471400, 49.60230989102910800, -28.61774594594331600 ) ) ; +#20833 = EDGE_CURVE ( 'NONE', #38345, #72677, #34110, .T. ) ; +#20834 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999500, 89.98922577050314000, -28.37255355648661500 ) ) ; +#20836 = VECTOR ( 'NONE', #39415, 1000.000000000000000 ) ; +#20835 = AXIS2_PLACEMENT_3D ( 'NONE', #11831, #18072, #73572 ) ; +#20837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20838 = ORIENTED_EDGE ( 'NONE', *, *, #75170, .F. ) ; +#20839 = CIRCLE ( 'NONE', #45070, 9.500000000000097700 ) ; +#20840 = AXIS2_PLACEMENT_3D ( 'NONE', #56994, #19727, #63269 ) ; +#20841 = EDGE_LOOP ( 'NONE', ( #50496, #65098, #36041 ) ) ; +#20842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28526, #72018, #47205, #9978 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#20843 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465409300, 18.99920551340398900, -28.70555803802992800 ) ) ; +#20844 = EDGE_LOOP ( 'NONE', ( #24899, #65598, #36151 ) ) ; +#20845 = ORIENTED_EDGE ( 'NONE', *, *, #12963, .T. ) ; +#20846 = AXIS2_PLACEMENT_3D ( 'NONE', #27902, #46586, #9346 ) ; +#20847 = VERTEX_POINT ( 'NONE', #7345 ) ; +#20848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64365, #39563, #45787, #8537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572506700, 0.0008043487657976393600 ), + .UNSPECIFIED. ) ; +#20849 = EDGE_CURVE ( 'NONE', #21529, #34797, #19653, .T. ) ; +#20850 = CONICAL_SURFACE ( 'NONE', #6920, 10.50000000000009600, 0.7853981633974500600 ) ; +#20851 = ADVANCED_FACE ( 'NONE', ( #44906 ), #59575, .T. ) ; +#20852 = AXIS2_PLACEMENT_3D ( 'NONE', #53460, #22455, #9944 ) ; +#20853 = AXIS2_PLACEMENT_3D ( 'NONE', #60459, #23175, #66690 ) ; +#20854 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20855 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819169800, 69.94924284854653300, -28.20555803803030800 ) ) ; +#20856 = CARTESIAN_POINT ( 'NONE', ( 2.107689023311820600E-013, 67.94142842854276400, -28.20555803802997700 ) ) ; +#20857 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851264700, 46.50238095238065500, -28.70555803802996700 ) ) ; +#20858 = CARTESIAN_POINT ( 'NONE', ( -4.036255108181025600, 89.94924284854707300, -28.20555803802997700 ) ) ; +#20859 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20860 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 43.66666666666666400, -6.705558038030000400 ) ) ; +#20861 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62685, #68919, #44124, #6905 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589649801491533300E-007, 0.0003301105057474653900 ), + .UNSPECIFIED. ) ; +#20862 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20863 = EDGE_LOOP ( 'NONE', ( #15655, #12498, #70424, #78666 ) ) ; +#20864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20866 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20867 = ORIENTED_EDGE ( 'NONE', *, *, #30219, .F. ) ; +#20868 = ADVANCED_FACE ( 'NONE', ( #78062 ), #38613, .T. ) ; +#20869 = FACE_OUTER_BOUND ( 'NONE', #21329, .T. ) ; +#20870 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20873 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049503000, 28.19228657120672600, -28.53891855579989600 ) ) ; +#20874 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492443300, 19.89456479767167400, -28.70555803802994200 ) ) ; +#20875 = ADVANCED_FACE ( 'NONE', ( #17732 ), #9920, .T. ) ; +#20876 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310460400, 28.60230989102909800, -28.61774594594333000 ) ) ; +#20877 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41308, #28863, #47531, #10315 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061247900, 0.004414112765716273800 ), + .UNSPECIFIED. ) ; +#20878 = ADVANCED_FACE ( 'NONE', ( #11887 ), #57601, .F. ) ; +#20879 = CARTESIAN_POINT ( 'NONE', ( 11.42773891679212600, 8.799999999999503300, -28.63329695482264000 ) ) ; +#20880 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#20881 = AXIS2_PLACEMENT_3D ( 'NONE', #42643, #42917, #5665 ) ; +#20882 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#20883 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20884 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 6.000000000000005300, -1.205558038030005300 ) ) ; +#20885 = CIRCLE ( 'NONE', #1185, 10.50000000000009600 ) ; +#20886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20888 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20890 = VERTEX_POINT ( 'NONE', #32656 ) ; +#20891 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20892 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#20893 = AXIS2_PLACEMENT_3D ( 'NONE', #59190, #65483, #34177 ) ; +#20894 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#20895 = ORIENTED_EDGE ( 'NONE', *, *, #48168, .T. ) ; +#20896 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71298, #27825, #65084, #34049 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.615212799425090200E-016, 0.002676095137485910500 ), + .UNSPECIFIED. ) ; +#20897 = VERTEX_POINT ( 'NONE', #38876 ) ; +#20898 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 79.94924284854670300, -28.20555803803047800 ) ) ; +#20899 = EDGE_CURVE ( 'NONE', #51472, #69606, #76091, .T. ) ; +#20900 = CONICAL_SURFACE ( 'NONE', #12008, 10.00000000000009600, 0.7853981633974482800 ) ; +#20901 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 50.79999999999999000, -28.45034744217088700 ) ) ; +#20902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20903 = CIRCLE ( 'NONE', #59092, 10.50000000000009800 ) ; +#20904 = AXIS2_PLACEMENT_3D ( 'NONE', #35654, #79182, #41880 ) ; +#20905 = VERTEX_POINT ( 'NONE', #7890 ) ; +#20906 = CARTESIAN_POINT ( 'NONE', ( -4.561825084090855000, 20.48385710212511800, -28.57719681746175800 ) ) ; +#20907 = CONICAL_SURFACE ( 'NONE', #59981, 10.50000000000009600, 0.7853981633974482800 ) ; +#20908 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448300, 85.79999999999998300, -28.20555803802997700 ) ) ; +#20909 = CIRCLE ( 'NONE', #15820, 10.50000000000009600 ) ; +#20911 = EDGE_LOOP ( 'NONE', ( #27055, #11161, #63649, #32068, #40837 ) ) ; +#20910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#20912 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#20913 = ORIENTED_EDGE ( 'NONE', *, *, #78845, .T. ) ; +#20914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20915 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20916 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900806600, 18.06267502090509700, -28.41043597897471400 ) ) ; +#20917 = CARTESIAN_POINT ( 'NONE', ( 3.597271441998213100E-014, 53.20037755566826800, -28.53664883431610000 ) ) ; +#20918 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#20919 = FACE_OUTER_BOUND ( 'NONE', #36288, .T. ) ; +#20920 = ORIENTED_EDGE ( 'NONE', *, *, #5750, .T. ) ; +#20921 = CONICAL_SURFACE ( 'NONE', #47126, 10.00000000000009200, 0.7853981633974447300 ) ; +#20922 = EDGE_CURVE ( 'NONE', #45559, #74940, #28465, .T. ) ; +#20923 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198451100, 80.90033558196108700, -28.70555803802997700 ) ) ; +#20924 = EDGE_LOOP ( 'NONE', ( #33007, #42473, #55551, #31030 ) ) ; +#20925 = ORIENTED_EDGE ( 'NONE', *, *, #74217, .F. ) ; +#20927 = EDGE_CURVE ( 'NONE', #71618, #12878, #5179, .T. ) ; +#20926 = VERTEX_POINT ( 'NONE', #57680 ) ; +#20928 = ORIENTED_EDGE ( 'NONE', *, *, #4479, .F. ) ; +#20929 = CARTESIAN_POINT ( 'NONE', ( 3.360598542614460000, 49.66749699759768100, -28.25434854811490500 ) ) ; +#20930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20931 = ORIENTED_EDGE ( 'NONE', *, *, #1590, .T. ) ; +#20932 = FACE_OUTER_BOUND ( 'NONE', #60108, .T. ) ; +#20933 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 49.66666666666668600, -5.535685056952199400 ) ) ; +#20934 = ORIENTED_EDGE ( 'NONE', *, *, #4824, .F. ) ; +#20935 = VERTEX_POINT ( 'NONE', #63964 ) ; +#20936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20937 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20938 = EDGE_CURVE ( 'NONE', #70832, #69496, #71507, .T. ) ; +#20939 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099068600, 31.03732497909462000, -28.41043597897462200 ) ) ; +#20940 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 14.66666666666667500, -8.133761268305512700 ) ) ; +#20941 = EDGE_CURVE ( 'NONE', #52754, #59224, #57044, .T. ) ; +#20942 = ORIENTED_EDGE ( 'NONE', *, *, #30957, .T. ) ; +#20943 = ORIENTED_EDGE ( 'NONE', *, *, #63570, .F. ) ; +#20944 = AXIS2_PLACEMENT_3D ( 'NONE', #2933, #46423, #9173 ) ; +#20945 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489669500, 41.44069092601377900, -28.35186440610859600 ) ) ; +#20946 = EDGE_LOOP ( 'NONE', ( #78213, #152, #4714, #9546 ) ) ; +#20947 = EDGE_CURVE ( 'NONE', #39774, #68175, #42554, .T. ) ; +#20948 = ORIENTED_EDGE ( 'NONE', *, *, #59923, .T. ) ; +#20949 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345251600, 61.32559822014165700, -28.29986836858030900 ) ) ; +#20950 = CONICAL_SURFACE ( 'NONE', #48084, 10.50000000000009600, 0.7853981633974482800 ) ; +#20951 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 52.00000000000000000, 9.794441961969996100 ) ) ; +#20952 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 101.5999999999999900, 0.0000000000000000000 ) ) ; +#20953 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#20954 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576917600, 45.54999999999999000, -28.65220501466659500 ) ) ; +#20955 = AXIS2_PLACEMENT_3D ( 'NONE', #5492, #30276, #55246 ) ; +#20956 = EDGE_CURVE ( 'NONE', #3718, #47427, #28162, .T. ) ; +#20957 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#20958 = EDGE_CURVE ( 'NONE', #60669, #10560, #13688, .T. ) ; +#20959 = CARTESIAN_POINT ( 'NONE', ( 4.395022650885739800E-014, 63.20037755566824700, -28.53664883431611800 ) ) ; +#20960 = EDGE_CURVE ( 'NONE', #59550, #66578, #79985, .T. ) ; +#20961 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20962 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042513600, 21.59027028261000700, -28.70555803802998100 ) ) ; +#20963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13090, #13362, #32109, #75604 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.874864696303535000E-005, 0.0009376791149928128700 ), + .UNSPECIFIED. ) ; +#20964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#20965 = AXIS2_PLACEMENT_3D ( 'NONE', #38551, #25836, #75846 ) ; +#20966 = CIRCLE ( 'NONE', #39186, 9.500000000000099500 ) ; +#20967 = CARTESIAN_POINT ( 'NONE', ( 10.70417714314204000, 9.519451428760836700, -28.52576311647858600 ) ) ; +#20968 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973389700, 77.33501542110236900, -28.70555803803002000 ) ) ; +#20969 = CARTESIAN_POINT ( 'NONE', ( -15.82622038785833100, 65.79999999999998300, -28.34928911331533600 ) ) ; +#20970 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865855600, 20.18727262089430500, -28.28853693900641300 ) ) ; +#20971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43593, #94, #49839, #12629 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962711968600, 0.0008252574424210607500 ), + .UNSPECIFIED. ) ; +#20972 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 30.74660241562181500, -28.20555803802995200 ) ) ; +#20973 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995689900, 14.98096581827296500, -28.69431509262338100 ) ) ; +#20974 = EDGE_CURVE ( 'NONE', #49034, #36198, #42991, .T. ) ; +#20976 = VERTEX_POINT ( 'NONE', #52189 ) ; +#20975 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#20977 = ADVANCED_FACE ( 'NONE', ( #42141 ), #40195, .F. ) ; +#20978 = CIRCLE ( 'NONE', #49918, 10.50000000000009600 ) ; +#20979 = AXIS2_PLACEMENT_3D ( 'NONE', #65883, #28653, #72144 ) ; +#20980 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 69.94924284854654700, -28.20555803803014400 ) ) ; +#20981 = AXIS2_PLACEMENT_3D ( 'NONE', #49899, #37666, #409 ) ; +#20982 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#20983 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70017, #51490, #70284, #33035 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736409166400E-007, 0.0009376786059872003600 ), + .UNSPECIFIED. ) ; +#20984 = ORIENTED_EDGE ( 'NONE', *, *, #62290, .T. ) ; +#20985 = ADVANCED_FACE ( 'NONE', ( #25646 ), #7105, .T. ) ; +#20986 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844493900, 85.79999999999985500, -28.20555803803014400 ) ) ; +#20987 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762400, 10.52620220503713000, -28.70555803802992800 ) ) ; +#20988 = CONICAL_SURFACE ( 'NONE', #80751, 10.00000000000009400, 0.7853981633974447300 ) ; +#20989 = CIRCLE ( 'NONE', #67924, 9.500000000000099500 ) ; +#20990 = VERTEX_POINT ( 'NONE', #65039 ) ; +#20991 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 55.49999999999998600, -7.061964498581016200 ) ) ; +#20992 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 70.34267608797600200, -28.20555803802997700 ) ) ; +#20993 = CARTESIAN_POINT ( 'NONE', ( 16.44673298322529600, 60.11613117245445200, -28.57420149390112500 ) ) ; +#20994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50366, #62947, #50647, #13447 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859795293200E-007, 0.0008759659331884745500 ), + .UNSPECIFIED. ) ; +#20995 = CIRCLE ( 'NONE', #25557, 10.00000000000009400 ) ; +#20996 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#20997 = ORIENTED_EDGE ( 'NONE', *, *, #32709, .F. ) ; +#20998 = ORIENTED_EDGE ( 'NONE', *, *, #32816, .F. ) ; +#20999 = CARTESIAN_POINT ( 'NONE', ( -8.116254736416751200, 24.54999999999998300, -28.53994725305374700 ) ) ; +#21000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21001 = AXIS2_PLACEMENT_3D ( 'NONE', #55539, #61827, #12046 ) ; +#21002 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109250500, 20.12856921007284000, -28.37063977681166400 ) ) ; +#21003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21004 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54961, #29724, #67227, #17725 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418553000, 0.001049055495481823200 ), + .UNSPECIFIED. ) ; +#21005 = ADVANCED_FACE ( 'NONE', ( #26494 ), #54794, .F. ) ; +#21006 = FACE_OUTER_BOUND ( 'NONE', #26804, .T. ) ; +#21007 = CONICAL_SURFACE ( 'NONE', #53353, 10.00000000000009200, 0.7853981633974447300 ) ; +#21008 = EDGE_LOOP ( 'NONE', ( #12909, #61530, #56316, #44941 ) ) ; +#21009 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492349500, 63.03944396378860700, -28.70555803803001300 ) ) ; +#21010 = VERTEX_POINT ( 'NONE', #40240 ) ; +#21011 = EDGE_CURVE ( 'NONE', #19988, #39773, #65546, .T. ) ; +#21012 = ORIENTED_EDGE ( 'NONE', *, *, #57611, .T. ) ; +#21013 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454032900, 72.51973550835639100, -28.70555803803022200 ) ) ; +#21014 = AXIS2_PLACEMENT_3D ( 'NONE', #56377, #43847, #19125 ) ; +#21015 = ORIENTED_EDGE ( 'NONE', *, *, #52125, .F. ) ; +#21016 = EDGE_LOOP ( 'NONE', ( #18507, #78700, #76583 ) ) ; +#21017 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 20.66666666666667900, 2.794441961969992100 ) ) ; +#21018 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#21019 = FACE_OUTER_BOUND ( 'NONE', #20813, .T. ) ; +#21020 = AXIS2_PLACEMENT_3D ( 'NONE', #10091, #3813, #53602 ) ; +#21021 = EDGE_LOOP ( 'NONE', ( #20367, #68215, #446 ) ) ; +#21022 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#21023 = CONICAL_SURFACE ( 'NONE', #44019, 10.50000000000009600, 0.7853981633974500600 ) ; +#21024 = AXIS2_PLACEMENT_3D ( 'NONE', #51804, #21956, #8303 ) ; +#21025 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#21026 = VERTEX_POINT ( 'NONE', #65327 ) ; +#21027 = CIRCLE ( 'NONE', #48560, 10.50000000000009800 ) ; +#21028 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#21029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11926, #49145, #36923, #80458 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137488709900 ), + .UNSPECIFIED. ) ; +#21030 = PLANE ( 'NONE', #13606 ) ; +#21031 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#21032 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 64.16666666666667100, 0.9380355014189834000 ) ) ; +#21033 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.932503002402297600, -28.20555803802994200 ) ) ; +#21034 = CARTESIAN_POINT ( 'NONE', ( 7.579514427231973800E-015, 22.42856308690587100, -28.36981695106780400 ) ) ; +#21035 = EDGE_CURVE ( 'NONE', #42272, #69526, #23692, .T. ) ; +#21036 = FACE_OUTER_BOUND ( 'NONE', #73207, .T. ) ; +#21037 = CARTESIAN_POINT ( 'NONE', ( -11.18653997827070200, 6.877501000800540600, -28.20555803802993100 ) ) ; +#21038 = EDGE_CURVE ( 'NONE', #122, #74697, #51004, .T. ) ; +#21039 = CIRCLE ( 'NONE', #8170, 10.00000000000009600 ) ; +#21040 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#21041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21042 = CARTESIAN_POINT ( 'NONE', ( -17.30191682485222100, 81.75831756590535800, -28.43753925764523400 ) ) ; +#21043 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21044 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484570800, 60.58127875436078100, -28.53757464917570600 ) ) ; +#21045 = EDGE_LOOP ( 'NONE', ( #71489, #37668, #9268, #68349 ) ) ; +#21046 = CIRCLE ( 'NONE', #50380, 10.00000000000009600 ) ; +#21047 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 69.97246552159113300, -28.38801640354855100 ) ) ; +#21048 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21049 = EDGE_CURVE ( 'NONE', #6862, #29021, #71354, .T. ) ; +#21050 = ORIENTED_EDGE ( 'NONE', *, *, #24142, .F. ) ; +#21051 = ADVANCED_FACE ( 'NONE', ( #73319 ), #69392, .F. ) ; +#21052 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656716300, 28.85339758437810400, -28.20555803802994200 ) ) ; +#21053 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21054 = CARTESIAN_POINT ( 'NONE', ( -21.98487565344344200, 6.507562173278609300, -25.88815306470264600 ) ) ; +#21055 = CIRCLE ( 'NONE', #77055, 9.500000000000099500 ) ; +#21056 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21057 = FACE_OUTER_BOUND ( 'NONE', #48349, .T. ) ; +#21058 = EDGE_CURVE ( 'NONE', #43623, #70616, #56747, .T. ) ; +#21059 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 26.50000000000001100, -4.865812075874393000 ) ) ; +#21060 = ORIENTED_EDGE ( 'NONE', *, *, #22600, .T. ) ; +#21061 = EDGE_CURVE ( 'NONE', #20694, #63152, #9035, .T. ) ; +#21062 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 59.97246552159111800, -28.38801640354855500 ) ) ; +#21063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21064 = ORIENTED_EDGE ( 'NONE', *, *, #12252, .T. ) ; +#21065 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21067 = ORIENTED_EDGE ( 'NONE', *, *, #23451, .F. ) ; +#21066 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655937400, 17.92298334620740600, -28.20555803802993500 ) ) ; +#21068 = ADVANCED_FACE ( 'NONE', ( #38230 ), #67459, .F. ) ; +#21069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21070 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849321000, 18.27966528189952900, -28.30868034705248000 ) ) ; +#21071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21072 = AXIS2_PLACEMENT_3D ( 'NONE', #59851, #28883, #16326 ) ; +#21073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21074 = EDGE_CURVE ( 'NONE', #52657, #13603, #3201, .T. ) ; +#21075 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571440400, 81.52858243452105600, -28.70555803802997700 ) ) ; +#21076 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62285, #31551, #50262, #13060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907013536900E-007, 0.0006651184466337343600 ), + .UNSPECIFIED. ) ; +#21077 = EDGE_CURVE ( 'NONE', #19495, #76903, #36569, .T. ) ; +#21078 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205879400, 10.01754275546396000, -28.27504145778803800 ) ) ; +#21079 = EDGE_CURVE ( 'NONE', #23362, #26822, #22141, .T. ) ; +#21080 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846540800, 18.99920551340398600, -28.70555803802992800 ) ) ; +#21081 = CARTESIAN_POINT ( 'NONE', ( 2.530136888809636700, 9.146957350529760300, -28.66910751791843700 ) ) ; +#21082 = CARTESIAN_POINT ( 'NONE', ( -15.08090515035403800, 9.959547424822977400, -28.70555803803000900 ) ) ; +#21083 = CONICAL_SURFACE ( 'NONE', #28884, 10.50000000000009600, 0.7853981633974500600 ) ; +#21084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21085 = CARTESIAN_POINT ( 'NONE', ( 12.14815378900370200, 75.79999999999950000, -28.37148172714619700 ) ) ; +#21086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21087 = ORIENTED_EDGE ( 'NONE', *, *, #24522, .F. ) ; +#21088 = EDGE_LOOP ( 'NONE', ( #3202, #32293, #70676, #57831, #3575 ) ) ; +#21089 = VERTEX_POINT ( 'NONE', #10328 ) ; +#21090 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41620, #78926, #72927, #35662 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007365383014251194700, 0.0008826254138086576400 ), + .UNSPECIFIED. ) ; +#21091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21092 = EDGE_LOOP ( 'NONE', ( #6694, #32289, #5195, #64135, #66743 ) ) ; +#21093 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21096 = CIRCLE ( 'NONE', #69327, 10.50000000000009600 ) ; +#21097 = CONICAL_SURFACE ( 'NONE', #37350, 10.00000000000009200, 0.7853981633974415100 ) ; +#21098 = AXIS2_PLACEMENT_3D ( 'NONE', #47783, #10561, #54058 ) ; +#21099 = CARTESIAN_POINT ( 'NONE', ( -4.801413064971206300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#21100 = AXIS2_PLACEMENT_3D ( 'NONE', #12890, #56367, #19116 ) ; +#21101 = PLANE ( 'NONE', #36314 ) ; +#21102 = VERTEX_POINT ( 'NONE', #53833 ) ; +#21103 = AXIS2_PLACEMENT_3D ( 'NONE', #44981, #7740, #51228 ) ; +#21104 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#21105 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999618100, 73.89610994602588800, -28.37519436813201800 ) ) ; +#21106 = ADVANCED_FACE ( 'NONE', ( #36305 ), #17825, .T. ) ; +#21107 = ORIENTED_EDGE ( 'NONE', *, *, #66094, .T. ) ; +#21108 = CIRCLE ( 'NONE', #69555, 10.00000000000009200 ) ; +#21109 = ORIENTED_EDGE ( 'NONE', *, *, #45321, .F. ) ; +#21110 = ORIENTED_EDGE ( 'NONE', *, *, #68328, .F. ) ; +#21111 = CIRCLE ( 'NONE', #26703, 10.00000000000009200 ) ; +#21112 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.93250300240229200, -28.20555803802996700 ) ) ; +#21113 = CONICAL_SURFACE ( 'NONE', #19944, 10.50000000000009600, 0.7853981633974482800 ) ; +#21114 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 70.16666666666662900, -9.205558038030003900 ) ) ; +#21115 = AXIS2_PLACEMENT_3D ( 'NONE', #4062, #78614, #60113 ) ; +#21116 = EDGE_CURVE ( 'NONE', #8083, #20897, #7641, .T. ) ; +#21117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21118 = ORIENTED_EDGE ( 'NONE', *, *, #18904, .T. ) ; +#21119 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 46.72261628933269900, -28.70555803802996700 ) ) ; +#21120 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 70.07141756547892400, -28.70555803802997700 ) ) ; +#21121 = FACE_OUTER_BOUND ( 'NONE', #2788, .T. ) ; +#21122 = ORIENTED_EDGE ( 'NONE', *, *, #3845, .F. ) ; +#21123 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 79.94924284854654700, -28.20555803803014400 ) ) ; +#21124 = EDGE_CURVE ( 'NONE', #5512, #44346, #74012, .T. ) ; +#21125 = CIRCLE ( 'NONE', #56092, 10.00000000000009200 ) ; +#21126 = AXIS2_PLACEMENT_3D ( 'NONE', #72016, #34748, #78252 ) ; +#21127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21128 = EDGE_LOOP ( 'NONE', ( #8633, #34243, #7131, #49467 ) ) ; +#21129 = CONICAL_SURFACE ( 'NONE', #858, 10.50000000000009200, 0.7853981633974482800 ) ; +#21130 = EDGE_LOOP ( 'NONE', ( #58199, #74369, #72283, #27334 ) ) ; +#21131 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999999600, 71.43250300240228500, -28.20555803802997700 ) ) ; +#21132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55598, #12106, #24614, #68125 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647747300000E-007, 0.0007596411030280891300 ), + .UNSPECIFIED. ) ; +#21133 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042476300, 27.50972971738994100, -28.70555803802994500 ) ) ; +#21134 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#21135 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 20.43250300240229200, -28.20555803802995200 ) ) ; +#21136 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 41.50000000000001400, 6.847000845227641200 ) ) ; +#21137 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.96823913367204300, -28.70555803802997700 ) ) ; +#21138 = FACE_OUTER_BOUND ( 'NONE', #34162, .T. ) ; +#21139 = AXIS2_PLACEMENT_3D ( 'NONE', #46375, #3153, #46661 ) ; +#21140 = FACE_OUTER_BOUND ( 'NONE', #5149, .T. ) ; +#21141 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274741400, 14.04999999999976300, -28.20555803803009500 ) ) ; +#21142 = EDGE_LOOP ( 'NONE', ( #20480, #17096 ) ) ; +#21143 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719593700, 33.15857157145700300, -28.37229765499281000 ) ) ; +#21144 = CARTESIAN_POINT ( 'NONE', ( -12.68596550977829600, 24.54999999999998600, -28.37321477197627900 ) ) ; +#21145 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#21146 = CARTESIAN_POINT ( 'NONE', ( 12.29416214178205300, 14.04999999999928000, -28.37136602294656400 ) ) ; +#21147 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21148 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812300, 89.60439022488337500, -28.70555803802997700 ) ) ; +#21149 = ORIENTED_EDGE ( 'NONE', *, *, #77288, .T. ) ; +#21150 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#21151 = AXIS2_PLACEMENT_3D ( 'NONE', #42347, #29908, #67131 ) ; +#21152 = ADVANCED_FACE ( 'NONE', ( #50868 ), #65536, .F. ) ; +#21153 = CARTESIAN_POINT ( 'NONE', ( -12.10011726479568800, 45.54999999999999700, -28.53808257741934200 ) ) ; +#21154 = FACE_OUTER_BOUND ( 'NONE', #44239, .T. ) ; +#21155 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 70.34267608797603100, -28.20555803802997700 ) ) ; +#21156 = VERTEX_POINT ( 'NONE', #66624 ) ; +#21157 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849331700, 49.77966528189953300, -28.30868034705251500 ) ) ; +#21158 = EDGE_CURVE ( 'NONE', #32971, #24026, #34366, .T. ) ; +#21159 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 3.833333333333348100, -3.349151577478984600 ) ) ; +#21160 = ORIENTED_EDGE ( 'NONE', *, *, #1711, .F. ) ; +#21161 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124972500, 85.13282980700519400, -28.53914313452736800 ) ) ; +#21162 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 27.69543746431598300, -28.61277292027075700 ) ) ; +#21163 = ORIENTED_EDGE ( 'NONE', *, *, #60316, .F. ) ; +#21164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70380, #1822, #14368, #33132 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635064131900E-007, 0.0008082706238602460500 ), + .UNSPECIFIED. ) ; +#21165 = ORIENTED_EDGE ( 'NONE', *, *, #66610, .T. ) ; +#21166 = CARTESIAN_POINT ( 'NONE', ( -10.87403623543712800, 9.632690823624765000, -28.36487527072564800 ) ) ; +#21167 = CIRCLE ( 'NONE', #53120, 10.50000000000009600 ) ; +#21168 = ADVANCED_FACE ( 'NONE', ( #1248 ), #15858, .T. ) ; +#21169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21171 = ORIENTED_EDGE ( 'NONE', *, *, #14040, .T. ) ; +#21170 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21172 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#21173 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 60.34267608797618000, -28.20555803803014400 ) ) ; +#21174 = CARTESIAN_POINT ( 'NONE', ( 17.14651939117043300, 89.08511947570772800, -28.47263588290808300 ) ) ; +#21175 = FACE_OUTER_BOUND ( 'NONE', #21934, .T. ) ; +#21176 = ORIENTED_EDGE ( 'NONE', *, *, #71460, .T. ) ; +#21177 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#21178 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985147600, 25.50238095238092100, -28.70555803802994200 ) ) ; +#21179 = EDGE_CURVE ( 'NONE', #76219, #6456, #59536, .T. ) ; +#21180 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.43250300240228500, -28.20555803802997700 ) ) ; +#21182 = EDGE_CURVE ( 'NONE', #9161, #16048, #19772, .T. ) ; +#21181 = ORIENTED_EDGE ( 'NONE', *, *, #70372, .T. ) ; +#21183 = ADVANCED_FACE ( 'NONE', ( #32411 ), #46969, .F. ) ; +#21184 = ORIENTED_EDGE ( 'NONE', *, *, #57707, .F. ) ; +#21185 = CARTESIAN_POINT ( 'NONE', ( -16.68767301991453400, 74.52958894367175400, -28.56367862433818400 ) ) ; +#21186 = CONICAL_SURFACE ( 'NONE', #76156, 10.50000000000009600, 0.7853981633974518300 ) ; +#21187 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 20.46868088498121800, -28.51286550264510200 ) ) ; +#21188 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#21189 = AXIS2_PLACEMENT_3D ( 'NONE', #56880, #19623, #63155 ) ; +#21190 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873539800, 22.17955320215949300, -28.64059091698903700 ) ) ; +#21191 = EDGE_CURVE ( 'NONE', #23425, #28772, #63574, .T. ) ; +#21192 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#21193 = EDGE_CURVE ( 'NONE', #49239, #23185, #5170, .T. ) ; +#21194 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21195 = CARTESIAN_POINT ( 'NONE', ( 6.100334448160402300, 60.79999999999999700, -28.20555803802989600 ) ) ; +#21196 = ORIENTED_EDGE ( 'NONE', *, *, #45596, .T. ) ; +#21197 = ADVANCED_FACE ( 'NONE', ( #74181 ), #45000, .F. ) ; +#21198 = EDGE_CURVE ( 'NONE', #13063, #15598, #61624, .T. ) ; +#21199 = AXIS2_PLACEMENT_3D ( 'NONE', #68673, #31425, #74937 ) ; +#21200 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 69.94924284854670300, -28.20555803803047800 ) ) ; +#21201 = CONICAL_SURFACE ( 'NONE', #67226, 10.00000000000009200, 0.7853981633974447300 ) ; +#21202 = ORIENTED_EDGE ( 'NONE', *, *, #47564, .T. ) ; +#21203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21204 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#21205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21206 = ADVANCED_FACE ( 'NONE', ( #48924 ), #17668, .T. ) ; +#21207 = FACE_OUTER_BOUND ( 'NONE', #39771, .T. ) ; +#21208 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 47.50000000000000700, 2.454695999814385600 ) ) ; +#21209 = AXIS2_PLACEMENT_3D ( 'NONE', #77870, #34637, #28417 ) ; +#21210 = AXIS2_PLACEMENT_3D ( 'NONE', #78794, #29052, #35278 ) ; +#21211 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 89.28967419478897200, -28.59353418718932400 ) ) ; +#21212 = ORIENTED_EDGE ( 'NONE', *, *, #72771, .F. ) ; +#21213 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77985, #40696, #15965, #59500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700485000, 0.0006725414583656181600 ), + .UNSPECIFIED. ) ; +#21214 = CARTESIAN_POINT ( 'NONE', ( -11.51258998854903800, 70.12140959736000000, -28.55996453402214300 ) ) ; +#21215 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 12.50000000000001200, 4.650848422521016300 ) ) ; +#21216 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21217 = FACE_OUTER_BOUND ( 'NONE', #77426, .T. ) ; +#21218 = VERTEX_POINT ( 'NONE', #67424 ) ; +#21219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21220 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 49.83333333333332900, -12.20555803803000600 ) ) ; +#21221 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#21222 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463300, 81.37838321498816200, -28.29547179040444100 ) ) ; +#21223 = ORIENTED_EDGE ( 'NONE', *, *, #66109, .F. ) ; +#21224 = AXIS2_PLACEMENT_3D ( 'NONE', #40544, #3269, #46778 ) ; +#21225 = EDGE_CURVE ( 'NONE', #34438, #71934, #30487, .T. ) ; +#21226 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454043900, 72.51973550835660400, -28.70555803802997400 ) ) ; +#21227 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929814400, 65.79999999999996900, -28.70555803802997700 ) ) ; +#21228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21229 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818041300, 51.65075715145332700, -28.20555803803005900 ) ) ; +#21230 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21231 = CONICAL_SURFACE ( 'NONE', #21778, 10.00000000000009400, 0.7853981633974447300 ) ; +#21232 = FACE_OUTER_BOUND ( 'NONE', #28702, .T. ) ; +#21233 = ORIENTED_EDGE ( 'NONE', *, *, #37096, .T. ) ; +#21234 = EDGE_LOOP ( 'NONE', ( #65817, #11001, #67722 ) ) ; +#21235 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805685700, 33.41427200762529300, -28.67630847257078800 ) ) ; +#21236 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507587200, 28.07379779496243400, -28.70555803802994200 ) ) ; +#21237 = ORIENTED_EDGE ( 'NONE', *, *, #9037, .T. ) ; +#21238 = EDGE_CURVE ( 'NONE', #69152, #80412, #45010, .T. ) ; +#21239 = ORIENTED_EDGE ( 'NONE', *, *, #20004, .T. ) ; +#21240 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189800, 41.86172549728279100, -28.47230003642276600 ) ) ; +#21241 = PLANE ( 'NONE', #8344 ) ; +#21242 = AXIS2_PLACEMENT_3D ( 'NONE', #8358, #20647, #45610 ) ; +#21243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21244 = ORIENTED_EDGE ( 'NONE', *, *, #63885, .F. ) ; +#21245 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 36.92318720225497900, -28.70555803802995200 ) ) ; +#21246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21247 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 20.44069092601379400, -28.35186440610856100 ) ) ; +#21248 = CARTESIAN_POINT ( 'NONE', ( 8.522869512015304800, 50.54999999999998300, -28.56111762074701600 ) ) ; +#21249 = ORIENTED_EDGE ( 'NONE', *, *, #28754, .F. ) ; +#21250 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999996400, 11.47376207875059300, -28.70555803802994200 ) ) ; +#21251 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105185700, 51.31766786975325100, -28.25051428653878100 ) ) ; +#21252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21253 = FACE_OUTER_BOUND ( 'NONE', #24842, .T. ) ; +#21254 = AXIS2_PLACEMENT_3D ( 'NONE', #3073, #46570, #9327 ) ; +#21255 = ORIENTED_EDGE ( 'NONE', *, *, #56825, .T. ) ; +#21256 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 53.33333333333334300, 5.722645192245503900 ) ) ; +#21257 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571364000, 20.52858243452107300, -28.70555803802995200 ) ) ; +#21258 = ORIENTED_EDGE ( 'NONE', *, *, #36302, .T. ) ; +#21259 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188001000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#21260 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67345, #23846, #36325, #79868 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722046321100E-007, 0.001076779618376950100 ), + .UNSPECIFIED. ) ; +#21261 = FACE_OUTER_BOUND ( 'NONE', #4096, .T. ) ; +#21262 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965577100, 10.17701665379167200, -28.20555803803009500 ) ) ; +#21263 = ADVANCED_FACE ( 'NONE', ( #78153 ), #43082, .T. ) ; +#21264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21265 = CARTESIAN_POINT ( 'NONE', ( -1.904151130983219600E-013, 84.13556610137270300, -28.54207364681947800 ) ) ; +#21266 = AXIS2_PLACEMENT_3D ( 'NONE', #77876, #40599, #3332 ) ; +#21267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21268 = VERTEX_POINT ( 'NONE', #55431 ) ; +#21269 = CONICAL_SURFACE ( 'NONE', #67702, 10.50000000000009600, 0.7853981633974500600 ) ; +#21270 = VERTEX_POINT ( 'NONE', #18185 ) ; +#21271 = ADVANCED_FACE ( 'NONE', ( #13928 ), #10015, .F. ) ; +#21272 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#21273 = VERTEX_POINT ( 'NONE', #74238 ) ; +#21274 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280406100, 57.94142842854297000, -28.37229765499282100 ) ) ; +#21275 = EDGE_LOOP ( 'NONE', ( #4426, #67039, #11852, #65567 ) ) ; +#21276 = ADVANCED_FACE ( 'NONE', ( #59667 ), #57695, .T. ) ; +#21277 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 18.50000000000001400, -7.061964498581016200 ) ) ; +#21278 = CARTESIAN_POINT ( 'NONE', ( -16.59501820436451100, 9.202502049225362400, -28.57758159557672400 ) ) ; +#21279 = ADVANCED_FACE ( 'NONE', ( #26582 ), #24610, .T. ) ; +#21280 = CIRCLE ( 'NONE', #10361, 10.00000000000009400 ) ; +#21281 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566617200, 14.05000000000002400, -28.70555803802992800 ) ) ; +#21282 = EDGE_CURVE ( 'NONE', #34790, #69283, #30630, .T. ) ; +#21283 = ORIENTED_EDGE ( 'NONE', *, *, #66795, .F. ) ; +#21284 = EDGE_LOOP ( 'NONE', ( #76140, #54, #25466, #25081 ) ) ; +#21285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21286 = EDGE_CURVE ( 'NONE', #4270, #73072, #80099, .T. ) ; +#21287 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 30.74660241562181500, -28.20555803802995200 ) ) ; +#21288 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9392, #52903, #28214, #71703, #34442, #77943 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 1.097494114417122800E-006, 0.001029427006310495200, 0.002057756518506573200 ), + .UNSPECIFIED. ) ; +#21289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21290 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#21291 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 62.00000000000000700, -1.205558038030005300 ) ) ; +#21292 = VECTOR ( 'NONE', #52648, 1000.000000000000000 ) ; +#21294 = ORIENTED_EDGE ( 'NONE', *, *, #76099, .T. ) ; +#21293 = EDGE_CURVE ( 'NONE', #77229, #893, #16151, .T. ) ; +#21295 = FACE_OUTER_BOUND ( 'NONE', #46094, .T. ) ; +#21296 = VERTEX_POINT ( 'NONE', #31247 ) ; +#21297 = AXIS2_PLACEMENT_3D ( 'NONE', #48655, #11447, #54938 ) ; +#21298 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 90.07141756547891000, -28.70555803802997700 ) ) ; +#21299 = ORIENTED_EDGE ( 'NONE', *, *, #49255, .F. ) ; +#21300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21301 = ORIENTED_EDGE ( 'NONE', *, *, #41739, .F. ) ; +#21302 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56445, #12954, #68960, #31722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572510264200E-007, 0.0004053774948102577100 ), + .UNSPECIFIED. ) ; +#21303 = CIRCLE ( 'NONE', #35620, 9.500000000000097700 ) ; +#21304 = CARTESIAN_POINT ( 'NONE', ( -2.838266626798499300, 93.79966511081713100, -28.47535546536781200 ) ) ; +#21305 = ORIENTED_EDGE ( 'NONE', *, *, #1111, .T. ) ; +#21306 = ORIENTED_EDGE ( 'NONE', *, *, #54264, .F. ) ; +#21307 = EDGE_LOOP ( 'NONE', ( #21394, #62815, #17580, #51220 ) ) ; +#21308 = ORIENTED_EDGE ( 'NONE', *, *, #17476, .T. ) ; +#21309 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 61.07757630314203100, -28.53861367218593500 ) ) ; +#21310 = ORIENTED_EDGE ( 'NONE', *, *, #40946, .T. ) ; +#21311 = CARTESIAN_POINT ( 'NONE', ( 9.963744891818969100, 79.94924284854664600, -28.20555803803014100 ) ) ; +#21312 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18691, #31214, #25215, #68722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647824447800E-007, 0.0007596411030278615500 ), + .UNSPECIFIED. ) ; +#21313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21314 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21315 = ORIENTED_EDGE ( 'NONE', *, *, #54781, .F. ) ; +#21316 = AXIS2_PLACEMENT_3D ( 'NONE', #9611, #53119, #15870 ) ; +#21317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21318 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 80.16749699759769500, -28.20555803802997700 ) ) ; +#21319 = EDGE_CURVE ( 'NONE', #29510, #10390, #1663, .T. ) ; +#21320 = EDGE_CURVE ( 'NONE', #17334, #53544, #68004, .T. ) ; +#21321 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27982, #71464, #46676, #9434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169780600, 0.001370301364302500700 ), + .UNSPECIFIED. ) ; +#21323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21322 = AXIS2_PLACEMENT_3D ( 'NONE', #77234, #64764, #33723 ) ; +#21324 = ORIENTED_EDGE ( 'NONE', *, *, #4309, .F. ) ; +#21325 = CARTESIAN_POINT ( 'NONE', ( -17.58124756195309100, 7.418752438041683400, -28.44704640668536300 ) ) ; +#21326 = CIRCLE ( 'NONE', #7319, 10.50000000000009600 ) ; +#21327 = ORIENTED_EDGE ( 'NONE', *, *, #2910, .T. ) ; +#21328 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 24.33333333333335000, 1.294441961969997200 ) ) ; +#21329 = EDGE_LOOP ( 'NONE', ( #78580, #10308, #29619, #12990 ) ) ; +#21330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21331 = EDGE_LOOP ( 'NONE', ( #49299, #72841, #74359, #70847 ) ) ; +#21332 = VERTEX_POINT ( 'NONE', #25249 ) ; +#21333 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#21334 = AXIS2_PLACEMENT_3D ( 'NONE', #69324, #32074, #75570 ) ; +#21335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21336 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#21337 = CIRCLE ( 'NONE', #10416, 10.50000000000009200 ) ; +#21338 = EDGE_CURVE ( 'NONE', #51297, #55167, #11976, .T. ) ; +#21339 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21341 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007437500, 21.28032162676582600, -28.55467576046955700 ) ) ; +#21342 = AXIS2_PLACEMENT_3D ( 'NONE', #50488, #69292, #56785 ) ; +#21343 = AXIS2_PLACEMENT_3D ( 'NONE', #39883, #2596, #46108 ) ; +#21344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21345 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#21346 = EDGE_LOOP ( 'NONE', ( #40641, #28195, #70667, #58534, #42588 ) ) ; +#21347 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 75.79999999999950000, -28.20555803803047800 ) ) ; +#21348 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#21349 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630700, 28.42298334620784000, -28.20555803802994200 ) ) ; +#21350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21351 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498184600, 51.60172914845357200, -28.24094723680244800 ) ) ; +#21352 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 69.94924284854687400, -28.20555803802997700 ) ) ; +#21353 = FACE_OUTER_BOUND ( 'NONE', #37038, .T. ) ; +#21354 = ORIENTED_EDGE ( 'NONE', *, *, #39159, .F. ) ; +#21355 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21356 = AXIS2_PLACEMENT_3D ( 'NONE', #1970, #14239, #39234 ) ; +#21357 = VERTEX_POINT ( 'NONE', #68758 ) ; +#21358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21359 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#21360 = ORIENTED_EDGE ( 'NONE', *, *, #47939, .F. ) ; +#21361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21362 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21363 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#21364 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55608, #49328, #5862, #18366 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082078518200E-007, 0.0007679735311067798900 ), + .UNSPECIFIED. ) ; +#21365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21366 = AXIS2_PLACEMENT_3D ( 'NONE', #42369, #29926, #54889 ) ; +#21367 = FACE_OUTER_BOUND ( 'NONE', #25043, .T. ) ; +#21368 = CIRCLE ( 'NONE', #44146, 9.500000000000101300 ) ; +#21369 = VERTEX_POINT ( 'NONE', #31507 ) ; +#21370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21371 = ADVANCED_FACE ( 'NONE', ( #76183 ), #39175, .F. ) ; +#21372 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 68.00000000000000000, 6.794441961969995200 ) ) ; +#21373 = AXIS2_PLACEMENT_3D ( 'NONE', #31079, #43542, #6309 ) ; +#21374 = ORIENTED_EDGE ( 'NONE', *, *, #53872, .T. ) ; +#21375 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21377 = ADVANCED_FACE ( 'NONE', ( #74274 ), #6108, .T. ) ; +#21378 = EDGE_CURVE ( 'NONE', #58440, #63824, #53541, .T. ) ; +#21379 = CONICAL_SURFACE ( 'NONE', #43540, 10.00000000000009200, 0.7853981633974415100 ) ; +#21380 = ORIENTED_EDGE ( 'NONE', *, *, #12786, .F. ) ; +#21381 = FACE_OUTER_BOUND ( 'NONE', #19176, .T. ) ; +#21382 = ORIENTED_EDGE ( 'NONE', *, *, #79557, .T. ) ; +#21383 = ORIENTED_EDGE ( 'NONE', *, *, #59529, .T. ) ; +#21384 = AXIS2_PLACEMENT_3D ( 'NONE', #45216, #20519, #51474 ) ; +#21385 = CONICAL_SURFACE ( 'NONE', #75161, 10.00000000000009400, 0.7853981633974447300 ) ; +#21386 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#21387 = EDGE_LOOP ( 'NONE', ( #74076, #49469, #19972, #67974 ) ) ; +#21388 = ORIENTED_EDGE ( 'NONE', *, *, #18407, .T. ) ; +#21389 = ORIENTED_EDGE ( 'NONE', *, *, #43573, .T. ) ; +#21390 = ORIENTED_EDGE ( 'NONE', *, *, #73589, .T. ) ; +#21391 = ORIENTED_EDGE ( 'NONE', *, *, #2648, .T. ) ; +#21392 = VERTEX_POINT ( 'NONE', #37996 ) ; +#21393 = EDGE_LOOP ( 'NONE', ( #29539, #46623, #11574 ) ) ; +#21394 = ORIENTED_EDGE ( 'NONE', *, *, #46152, .F. ) ; +#21395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21396 = PLANE ( 'NONE', #56540 ) ; +#21397 = ADVANCED_FACE ( 'NONE', ( #72323 ), #53791, .F. ) ; +#21398 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561200, 85.79999999999998300, -28.70525300642875200 ) ) ; +#21399 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459653000, 69.08026449164327700, -28.70555803803014100 ) ) ; +#21400 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 39.33333333333333600, -10.73183747965883100 ) ) ; +#21401 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091595900, 43.07425125164782300, -28.70555803803001300 ) ) ; +#21402 = CONICAL_SURFACE ( 'NONE', #55224, 10.50000000000009600, 0.7853981633974500600 ) ; +#21404 = EDGE_LOOP ( 'NONE', ( #62059, #48200, #64752, #12001, #58570 ) ) ; +#21403 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#21405 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146282700, 90.34267608797584600, -28.20555803803047800 ) ) ; +#21407 = EDGE_CURVE ( 'NONE', #506, #58618, #70325, .T. ) ; +#21406 = ORIENTED_EDGE ( 'NONE', *, *, #40315, .T. ) ; +#21408 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922493200, 51.50962196508508100, -28.29483400905883500 ) ) ; +#21409 = ORIENTED_EDGE ( 'NONE', *, *, #41861, .T. ) ; +#21410 = ORIENTED_EDGE ( 'NONE', *, *, #12723, .F. ) ; +#21411 = EDGE_CURVE ( 'NONE', #69763, #14016, #55729, .T. ) ; +#21412 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21413 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 20.07757630314203800, -28.53861367218591000 ) ) ; +#21414 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344312700, 20.67701665379241400, -28.20555803802994200 ) ) ; +#21415 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#21416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21417 = FACE_OUTER_BOUND ( 'NONE', #17721, .T. ) ; +#21418 = ORIENTED_EDGE ( 'NONE', *, *, #13582, .T. ) ; +#21419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21420 = EDGE_CURVE ( 'NONE', #31168, #40890, #8030, .T. ) ; +#21421 = ORIENTED_EDGE ( 'NONE', *, *, #65879, .T. ) ; +#21422 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21423 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#21424 = EDGE_CURVE ( 'NONE', #59094, #44206, #39041, .T. ) ; +#21425 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17383, #11403, #30193, #73682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780677987000E-007, 0.0002745453538439356600 ), + .UNSPECIFIED. ) ; +#21426 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#21427 = AXIS2_PLACEMENT_3D ( 'NONE', #74633, #37323, #88 ) ; +#21428 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21430 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 1.666666666666677400, 2.794441961969992100 ) ) ; +#21431 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.22261628933270600, -28.70555803802995200 ) ) ; +#21432 = CONICAL_SURFACE ( 'NONE', #8696, 10.00000000000009400, 0.7853981633974447300 ) ; +#21433 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21434 = ORIENTED_EDGE ( 'NONE', *, *, #14850, .T. ) ; +#21435 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362735600, 74.03471854269724900, -28.66119098264625000 ) ) ; +#21436 = ORIENTED_EDGE ( 'NONE', *, *, #13075, .F. ) ; +#21437 = ORIENTED_EDGE ( 'NONE', *, *, #32940, .T. ) ; +#21438 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21439 = AXIS2_PLACEMENT_3D ( 'NONE', #7976, #76521, #14531 ) ; +#21440 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484958100, 89.28967419478928500, -28.59353418718927700 ) ) ; +#21441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34158, #77674, #52904, #15662 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100398364500, 0.001249956855145901600 ), + .UNSPECIFIED. ) ; +#21442 = EDGE_CURVE ( 'NONE', #22705, #45374, #24618, .T. ) ; +#21443 = EDGE_CURVE ( 'NONE', #79655, #8921, #37224, .T. ) ; +#21444 = EDGE_CURVE ( 'NONE', #34852, #48803, #10167, .T. ) ; +#21445 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21446 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.23796787468685900, -28.38801640354854800 ) ) ; +#21447 = PLANE ( 'NONE', #30341 ) ; +#21448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21449 = AXIS2_PLACEMENT_3D ( 'NONE', #54227, #16981, #60522 ) ; +#21450 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571446600, 10.02858243452106100, -28.70555803802994200 ) ) ; +#21451 = CYLINDRICAL_SURFACE ( 'NONE', #59450, 10.00000000000000000 ) ; +#21452 = VERTEX_POINT ( 'NONE', #14078 ) ; +#21453 = ORIENTED_EDGE ( 'NONE', *, *, #644, .T. ) ; +#21454 = CARTESIAN_POINT ( 'NONE', ( 3.371507771243967200, 61.43250300240229900, -28.25053031809460100 ) ) ; +#21455 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21456 = EDGE_CURVE ( 'NONE', #55015, #12346, #76461, .T. ) ; +#21457 = AXIS2_PLACEMENT_3D ( 'NONE', #42078, #17350, #60889 ) ; +#21458 = AXIS2_PLACEMENT_3D ( 'NONE', #14607, #64138, #76602 ) ; +#21459 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21460 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.16749699759768100, -28.20555803802997700 ) ) ; +#21461 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3136, #40413, #15673, #59181 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001429899251487062000 ), + .UNSPECIFIED. ) ; +#21462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21463 = ADVANCED_FACE ( 'NONE', ( #22663 ), #35329, .T. ) ; +#21464 = CIRCLE ( 'NONE', #23205, 10.50000000000009800 ) ; +#21465 = VERTEX_POINT ( 'NONE', #1795 ) ; +#21466 = ORIENTED_EDGE ( 'NONE', *, *, #72961, .F. ) ; +#21467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21468 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21469 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 11.00000000000001800, -1.205558038030002800 ) ) ; +#21470 = FACE_OUTER_BOUND ( 'NONE', #72241, .T. ) ; +#21471 = ORIENTED_EDGE ( 'NONE', *, *, #20112, .F. ) ; +#21472 = ORIENTED_EDGE ( 'NONE', *, *, #47952, .F. ) ; +#21473 = ORIENTED_EDGE ( 'NONE', *, *, #72823, .T. ) ; +#21474 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853334900, 20.79130857014965300, -28.37223374938517400 ) ) ; +#21475 = ORIENTED_EDGE ( 'NONE', *, *, #5099, .T. ) ; +#21477 = VERTEX_POINT ( 'NONE', #45292 ) ; +#21476 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.79999999999999700, -28.20555803802997700 ) ) ; +#21478 = EDGE_LOOP ( 'NONE', ( #4821, #18723, #29890 ) ) ; +#21479 = ADVANCED_FACE ( 'NONE', ( #41148 ), #2181, .F. ) ; +#21480 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 45.33333333333333600, -3.705558038030004400 ) ) ; +#21481 = AXIS2_PLACEMENT_3D ( 'NONE', #77705, #28258, #3170 ) ; +#21482 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#21483 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 10.33333333333334600, -5.205558038030008400 ) ) ; +#21484 = AXIS2_PLACEMENT_3D ( 'NONE', #46479, #9237, #52768 ) ; +#21485 = ORIENTED_EDGE ( 'NONE', *, *, #50179, .F. ) ; +#21486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21487 = CONICAL_SURFACE ( 'NONE', #72425, 10.50000000000009600, 0.7853981633974518300 ) ; +#21488 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500128100, 69.83662311806175200, -28.37223523914899900 ) ) ; +#21489 = ORIENTED_EDGE ( 'NONE', *, *, #56394, .F. ) ; +#21490 = ORIENTED_EDGE ( 'NONE', *, *, #58940, .T. ) ; +#21491 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 20.67701665379184600, -28.20555803802994200 ) ) ; +#21492 = ORIENTED_EDGE ( 'NONE', *, *, #62757, .F. ) ; +#21493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21494 = EDGE_CURVE ( 'NONE', #23287, #1113, #62033, .T. ) ; +#21495 = EDGE_LOOP ( 'NONE', ( #50685, #2962, #59167 ) ) ; +#21496 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 47.66666666666667100, 8.320721403598824400 ) ) ; +#21497 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265434300, 70.27440177985785400, -28.29986836858057200 ) ) ; +#21498 = VERTEX_POINT ( 'NONE', #26857 ) ; +#21499 = ORIENTED_EDGE ( 'NONE', *, *, #19237, .F. ) ; +#21500 = AXIS2_PLACEMENT_3D ( 'NONE', #73401, #36136, #79647 ) ; +#21501 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 47.44142842854307000, -28.20555803802996700 ) ) ; +#21502 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 74.83849307182684600, -28.68631150211663100 ) ) ; +#21503 = CIRCLE ( 'NONE', #56118, 10.50000000000009600 ) ; +#21504 = AXIS2_PLACEMENT_3D ( 'NONE', #924, #50678, #75465 ) ; +#21505 = ORIENTED_EDGE ( 'NONE', *, *, #76770, .F. ) ; +#21506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43813, #319, #56343, #19088 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082046110400E-007, 0.001119323292485690600 ), + .UNSPECIFIED. ) ; +#21507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21508 = ADVANCED_FACE ( 'NONE', ( #28560 ), #49850, .F. ) ; +#21509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21510 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#21511 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148358100, 44.59761904761935400, -28.70555803802996700 ) ) ; +#21512 = CONICAL_SURFACE ( 'NONE', #69126, 10.00000000000009200, 0.7853981633974447300 ) ; +#21513 = EDGE_LOOP ( 'NONE', ( #313, #13672, #58319 ) ) ; +#21514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21515 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195924200, 12.15857157145701000, -28.37229765499279200 ) ) ; +#21516 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21517 = ORIENTED_EDGE ( 'NONE', *, *, #9930, .T. ) ; +#21518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21521 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#21522 = EDGE_CURVE ( 'NONE', #16766, #12265, #66452, .T. ) ; +#21523 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 51.16666666666665700, -9.205558038030003900 ) ) ; +#21524 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#21525 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 33.87738371066728100, -28.70555803802996700 ) ) ; +#21526 = EDGE_CURVE ( 'NONE', #3715, #38695, #47515, .T. ) ; +#21527 = VERTEX_POINT ( 'NONE', #64411 ) ; +#21528 = EDGE_LOOP ( 'NONE', ( #49220, #53016, #80695 ) ) ; +#21529 = VERTEX_POINT ( 'NONE', #45839 ) ; +#21530 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944346100, 10.29955846777016900, -28.38339015421979300 ) ) ; +#21531 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#21532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35036, #47473, #72559, #35302, #78816, #41522, #4260, #47759 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 2.677100447415262800E-016, 0.002282923683053698300, 0.003424385524580413700, 0.004565847366107129500 ), + .UNSPECIFIED. ) ; +#21533 = EDGE_CURVE ( 'NONE', #58204, #7843, #4157, .T. ) ; +#21534 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#21535 = EDGE_CURVE ( 'NONE', #25026, #52135, #33083, .T. ) ; +#21536 = FACE_OUTER_BOUND ( 'NONE', #22333, .T. ) ; +#21537 = ORIENTED_EDGE ( 'NONE', *, *, #42997, .F. ) ; +#21538 = EDGE_LOOP ( 'NONE', ( #58675, #4844, #57191, #38976 ) ) ; +#21539 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21540 = EDGE_CURVE ( 'NONE', #55730, #19093, #68387, .T. ) ; +#21541 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 47.83333333333332900, -3.349151577478984600 ) ) ; +#21542 = EDGE_CURVE ( 'NONE', #26055, #20598, #51797, .T. ) ; +#21543 = EDGE_LOOP ( 'NONE', ( #2622, #78283, #4573 ) ) ; +#21544 = CIRCLE ( 'NONE', #7820, 10.50000000000009600 ) ; +#21545 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25577, #62840, #31834, #75332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849207700, 0.007919184322923046900 ), + .UNSPECIFIED. ) ; +#21546 = EDGE_LOOP ( 'NONE', ( #36518, #14814, #71550 ) ) ; +#21547 = EDGE_LOOP ( 'NONE', ( #73078, #29277, #64961, #49508, #45835 ) ) ; +#21548 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849328600, 41.32033471810043300, -28.30868034705250800 ) ) ; +#21549 = ORIENTED_EDGE ( 'NONE', *, *, #27265, .F. ) ; +#21550 = ORIENTED_EDGE ( 'NONE', *, *, #34398, .F. ) ; +#21551 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 16.33333333333334600, 5.722645192245503900 ) ) ; +#21552 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 70.16749699759769500, -28.20555803802997700 ) ) ; +#21553 = AXIS2_PLACEMENT_3D ( 'NONE', #19451, #38174, #25726 ) ; +#21554 = FACE_OUTER_BOUND ( 'NONE', #45933, .T. ) ; +#21555 = EDGE_CURVE ( 'NONE', #26948, #64808, #18755, .T. ) ; +#21556 = EDGE_CURVE ( 'NONE', #1580, #68879, #18624, .T. ) ; +#21557 = EDGE_CURVE ( 'NONE', #33801, #21156, #4171, .T. ) ; +#21558 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239500, 31.52620220503713000, -28.70555803802995200 ) ) ; +#21559 = ADVANCED_FACE ( 'NONE', ( #64525 ), #31409, .T. ) ; +#21560 = CONICAL_SURFACE ( 'NONE', #418, 10.00000000000009200, 0.7853981633974447300 ) ; +#21561 = AXIS2_PLACEMENT_3D ( 'NONE', #46113, #21678, #65215 ) ; +#21562 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .F. ) ; +#21563 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973404500, 74.26498457889739800, -28.70555803803001600 ) ) ; +#21564 = EDGE_LOOP ( 'NONE', ( #75311, #19536, #24186, #39056 ) ) ; +#21565 = ORIENTED_EDGE ( 'NONE', *, *, #58351, .T. ) ; +#21566 = ORIENTED_EDGE ( 'NONE', *, *, #61681, .T. ) ; +#21567 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#21568 = ORIENTED_EDGE ( 'NONE', *, *, #53677, .T. ) ; +#21569 = CIRCLE ( 'NONE', #23251, 9.500000000000097700 ) ; +#21570 = ADVANCED_FACE ( 'NONE', ( #33341 ), #3139, .T. ) ; +#21571 = AXIS2_PLACEMENT_3D ( 'NONE', #1426, #75960, #13965 ) ; +#21572 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 19.66666666666667900, -3.705558038030004400 ) ) ; +#21573 = AXIS2_PLACEMENT_3D ( 'NONE', #77714, #21714, #34212 ) ; +#21574 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725289700, 24.55000000000000100, -28.20555803802994200 ) ) ; +#21575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21578 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 59.83333333333335000, -3.349151577478984600 ) ) ; +#21579 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#21580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21581 = CIRCLE ( 'NONE', #48730, 10.50000000000009600 ) ; +#21583 = EDGE_LOOP ( 'NONE', ( #45780, #40642, #45814 ) ) ; +#21582 = ADVANCED_FACE ( 'NONE', ( #47909 ), #29490, .T. ) ; +#21584 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 70.40166528437781300, -28.28704243186578500 ) ) ; +#21585 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#21586 = CARTESIAN_POINT ( 'NONE', ( 12.72730845928327200, 85.79999999999951400, -28.53979898350210200 ) ) ; +#21587 = CARTESIAN_POINT ( 'NONE', ( 9.198586935028792800, 94.72249899919930300, -28.20555803802997700 ) ) ; +#21588 = AXIS2_PLACEMENT_3D ( 'NONE', #64077, #33044, #32767 ) ; +#21589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21590 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 20.86172549728275200, -28.47230003642272300 ) ) ; +#21591 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#21592 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59505, #65505, #40699, #65761 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795627200 ), + .UNSPECIFIED. ) ; +#21593 = ADVANCED_FACE ( 'NONE', ( #243 ), #77127, .F. ) ; +#21594 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929813500, 85.79999999999998300, -28.70555803802997700 ) ) ; +#21595 = CARTESIAN_POINT ( 'NONE', ( -15.02626848327745700, 75.71754128061482400, -28.70555803803001600 ) ) ; +#21596 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858086700, 67.92318720225489400, -28.70555803802997700 ) ) ; +#21597 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846291900, 90.80000000000001100, -28.55171188418377800 ) ) ; +#21598 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 22.16666666666668600, -2.545304000185620600 ) ) ; +#21599 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#21600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21601 = EDGE_CURVE ( 'NONE', #54395, #5676, #70475, .T. ) ; +#21602 = EDGE_LOOP ( 'NONE', ( #25668, #30451, #3960, #67290 ) ) ; +#21603 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489519400, 9.940690926013788300, -28.35186440610861400 ) ) ; +#21604 = AXIS2_PLACEMENT_3D ( 'NONE', #62626, #31631, #19094 ) ; +#21605 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 79.60439022488284900, -28.70555803803047500 ) ) ; +#21606 = ORIENTED_EDGE ( 'NONE', *, *, #2370, .T. ) ; +#21607 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345609700, 81.52472935029894100, -28.39317435246133700 ) ) ; +#21608 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21609 = ADVANCED_FACE ( 'NONE', ( #16814 ), #43995, .T. ) ; +#21610 = PLANE ( 'NONE', #8755 ) ; +#21611 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701300, 14.98096581827321200, -28.69431509262337300 ) ) ; +#21612 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 61.65075715145309900, -28.20555803802997700 ) ) ; +#21613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21615 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#21616 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 79.94924284854654700, -28.20555803803014400 ) ) ; +#21617 = CONICAL_SURFACE ( 'NONE', #59055, 10.50000000000009600, 0.7853981633974500600 ) ; +#21618 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21619 = VERTEX_POINT ( 'NONE', #71996 ) ; +#21620 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105216200, 80.28233213024647300, -28.25051428653847600 ) ) ; +#21621 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21622 = AXIS2_PLACEMENT_3D ( 'NONE', #69549, #32302, #75803 ) ; +#21623 = ORIENTED_EDGE ( 'NONE', *, *, #6967, .F. ) ; +#21624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21625 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#21626 = CONICAL_SURFACE ( 'NONE', #43217, 10.00000000000009400, 0.7853981633974447300 ) ; +#21627 = ORIENTED_EDGE ( 'NONE', *, *, #59291, .F. ) ; +#21629 = EDGE_LOOP ( 'NONE', ( #28513, #50973, #27207, #15209 ) ) ; +#21628 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 87.22261628933213700, -28.70555803803047500 ) ) ; +#21630 = ORIENTED_EDGE ( 'NONE', *, *, #4121, .F. ) ; +#21631 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.13176086632794100, -28.70555803802994200 ) ) ; +#21632 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#21633 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 63.67681279774499400, -28.70555803802997700 ) ) ; +#21634 = ORIENTED_EDGE ( 'NONE', *, *, #62891, .F. ) ; +#21635 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 35.05000000000000400, -28.20555803802995200 ) ) ; +#21636 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68989, #25491, #705, #44186 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453806999500, 0.0005317208426584691100 ), + .UNSPECIFIED. ) ; +#21637 = AXIS2_PLACEMENT_3D ( 'NONE', #32719, #76235, #38948 ) ; +#21638 = CONICAL_SURFACE ( 'NONE', #17648, 10.00000000000009200, 0.7853981633974447300 ) ; +#21639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21640 = ORIENTED_EDGE ( 'NONE', *, *, #32262, .T. ) ; +#21641 = FACE_OUTER_BOUND ( 'NONE', #61085, .T. ) ; +#21642 = EDGE_CURVE ( 'NONE', #53090, #28672, #56011, .T. ) ; +#21643 = VERTEX_POINT ( 'NONE', #53476 ) ; +#21644 = ORIENTED_EDGE ( 'NONE', *, *, #18438, .T. ) ; +#21645 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39423, #76684, #45642, #8402 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957517902400E-005, 0.001119324643800004500 ), + .UNSPECIFIED. ) ; +#21646 = ORIENTED_EDGE ( 'NONE', *, *, #57487, .F. ) ; +#21647 = CARTESIAN_POINT ( 'NONE', ( 10.22125914545593500, 18.16476764525078400, -28.30311733712067800 ) ) ; +#21648 = CONICAL_SURFACE ( 'NONE', #22087, 10.50000000000009200, 0.7853981633974482800 ) ; +#21649 = ORIENTED_EDGE ( 'NONE', *, *, #21378, .F. ) ; +#21650 = VECTOR ( 'NONE', #23562, 1000.000000000000000 ) ; +#21651 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 65.83333333333334300, -9.205558038030003900 ) ) ; +#21652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21653 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432826800, 9.746602415621900700, -28.20555803802992800 ) ) ; +#21654 = EDGE_CURVE ( 'NONE', #1214, #71340, #41562, .T. ) ; +#21655 = EDGE_CURVE ( 'NONE', #68982, #77717, #27115, .T. ) ; +#21656 = FACE_OUTER_BOUND ( 'NONE', #51375, .T. ) ; +#21657 = ORIENTED_EDGE ( 'NONE', *, *, #78986, .T. ) ; +#21658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21660 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21661 = ADVANCED_FACE ( 'NONE', ( #60606 ), #10964, .F. ) ; +#21662 = EDGE_CURVE ( 'NONE', #19571, #78429, #12655, .T. ) ; +#21663 = EDGE_CURVE ( 'NONE', #3004, #2875, #79101, .T. ) ; +#21664 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 30.96868088498121500, -28.51286550264512000 ) ) ; +#21665 = EDGE_CURVE ( 'NONE', #12775, #42642, #78987, .T. ) ; +#21666 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61446, #61172, #73946, #36648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0009376786059871883300 ), + .UNSPECIFIED. ) ; +#21667 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614977400, 49.49322649091155300, -28.30799595738902100 ) ) ; +#21668 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#21669 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 37.16666666666669300, 9.794441961969994300 ) ) ; +#21670 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571382600, 31.02858243452106600, -28.70555803802996700 ) ) ; +#21671 = EDGE_CURVE ( 'NONE', #16262, #4794, #64536, .T. ) ; +#21672 = AXIS2_PLACEMENT_3D ( 'NONE', #78079, #40796, #3526 ) ; +#21673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21674 = CARTESIAN_POINT ( 'NONE', ( -3.031778038947719400, 70.28233213024647300, -28.25051428653852500 ) ) ; +#21675 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686868000, 51.58005252438383800, -28.24986299608865200 ) ) ; +#21676 = ADVANCED_FACE ( 'NONE', ( #45963 ), #42069, .F. ) ; +#21677 = ORIENTED_EDGE ( 'NONE', *, *, #54378, .T. ) ; +#21678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21679 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 44.37738371066728900, -28.70555803802997700 ) ) ; +#21680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21683 = ORIENTED_EDGE ( 'NONE', *, *, #60398, .T. ) ; +#21682 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#21684 = ADVANCED_FACE ( 'NONE', ( #75180 ), #8959, .F. ) ; +#21685 = AXIS2_PLACEMENT_3D ( 'NONE', #29122, #72603, #35349 ) ; +#21686 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21687 = AXIS2_PLACEMENT_3D ( 'NONE', #3206, #9459, #40474 ) ; +#21688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17395, #79411, #29949, #73422 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0002673660010786253100 ), + .UNSPECIFIED. ) ; +#21689 = ADVANCED_FACE ( 'NONE', ( #58627 ), #56669, .T. ) ; +#21690 = CARTESIAN_POINT ( 'NONE', ( 17.23541217981691500, 9.338396927662429900, -28.45251359071469500 ) ) ; +#21691 = FACE_OUTER_BOUND ( 'NONE', #76320, .T. ) ; +#21692 = ORIENTED_EDGE ( 'NONE', *, *, #65743, .T. ) ; +#21693 = CIRCLE ( 'NONE', #21705, 9.500000000000099500 ) ; +#21694 = CARTESIAN_POINT ( 'NONE', ( 17.32934156052452600, 81.13134338025905400, -28.43089930266688000 ) ) ; +#21695 = ORIENTED_EDGE ( 'NONE', *, *, #46772, .F. ) ; +#21696 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, -0.4999999999999728000, -7.061964498581016200 ) ) ; +#21697 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305560800, 81.89604671418325700, -28.70555803802999500 ) ) ; +#21698 = EDGE_LOOP ( 'NONE', ( #70770, #42360, #25793, #16762 ) ) ; +#21699 = CIRCLE ( 'NONE', #8456, 9.500000000000099500 ) ; +#21700 = EDGE_LOOP ( 'NONE', ( #29111, #73374, #17595, #22219, #20601, #13105, #39077 ) ) ; +#21701 = EDGE_LOOP ( 'NONE', ( #23062, #50768, #12697, #80454 ) ) ; +#21702 = SURFACE_STYLE_USAGE ( .BOTH. , #58933 ) ; +#21703 = CARTESIAN_POINT ( 'NONE', ( -9.279968675731103300, 93.69934232704547100, -28.49690748628279000 ) ) ; +#21704 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310460400, 28.60230989102909800, -28.61774594594333000 ) ) ; +#21705 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #44068, #6842 ) ; +#21706 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630000, 38.92298334620783600, -28.20555803802995200 ) ) ; +#21707 = EDGE_CURVE ( 'NONE', #48984, #26007, #62547, .T. ) ; +#21708 = CIRCLE ( 'NONE', #9780, 10.00000000000009200 ) ; +#21709 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#21710 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#21711 = PLANE ( 'NONE', #73993 ) ; +#21712 = ORIENTED_EDGE ( 'NONE', *, *, #40484, .F. ) ; +#21713 = FACE_OUTER_BOUND ( 'NONE', #10302, .T. ) ; +#21714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21715 = ORIENTED_EDGE ( 'NONE', *, *, #3539, .T. ) ; +#21716 = EDGE_CURVE ( 'NONE', #13337, #25396, #12913, .T. ) ; +#21717 = ORIENTED_EDGE ( 'NONE', *, *, #60012, .F. ) ; +#21718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21719 = AXIS2_PLACEMENT_3D ( 'NONE', #28168, #9339, #27896 ) ; +#21720 = ORIENTED_EDGE ( 'NONE', *, *, #53186, .T. ) ; +#21721 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66406, #41368, #35418, #78933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217704504487900E-007, 0.0008482615949370319300 ), + .UNSPECIFIED. ) ; +#21722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21723 = CIRCLE ( 'NONE', #143, 10.00000000000009200 ) ; +#21724 = ORIENTED_EDGE ( 'NONE', *, *, #23435, .F. ) ; +#21725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21727 = CONICAL_SURFACE ( 'NONE', #25778, 10.00000000000009400, 0.7853981633974447300 ) ; +#21728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21729 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21730 = ORIENTED_EDGE ( 'NONE', *, *, #72441, .F. ) ; +#21731 = AXIS2_PLACEMENT_3D ( 'NONE', #68242, #6232, #49703 ) ; +#21732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21734 = VECTOR ( 'NONE', #53297, 1000.000000000000000 ) ; +#21735 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000049900, 69.63176086632780900, -28.70555803803030800 ) ) ; +#21736 = ORIENTED_EDGE ( 'NONE', *, *, #517, .F. ) ; +#21737 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 8.833333333333348100, 1.741883078712340300 ) ) ; +#21738 = CIRCLE ( 'NONE', #19033, 10.00000000000009200 ) ; +#21739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21740 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 43.16666666666668600, 0.1341879241256129200 ) ) ; +#21741 = AXIS2_PLACEMENT_3D ( 'NONE', #5108, #48601, #11391 ) ; +#21742 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#21743 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#21744 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819243100, 69.94924284854681700, -28.20555803803005900 ) ) ; +#21745 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 8.166666666666689200, 0.9380355014189834000 ) ) ; +#21746 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21747 = EDGE_CURVE ( 'NONE', #3945, #31113, #14843, .T. ) ; +#21748 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 45.50000000000000700, -9.258116921287651700 ) ) ; +#21749 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21750 = CARTESIAN_POINT ( 'NONE', ( -10.42773891679285600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#21751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21752 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ; +#21753 = ORIENTED_EDGE ( 'NONE', *, *, #33811, .F. ) ; +#21754 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344754100, 10.17701665379211600, -28.20555803803009800 ) ) ; +#21755 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965677300, 17.92298334620755900, -28.20555803803042500 ) ) ; +#21756 = ORIENTED_EDGE ( 'NONE', *, *, #58630, .F. ) ; +#21757 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21758 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41612, #10625, #16881, #60413 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726978860700, 0.0008135742306951671400 ), + .UNSPECIFIED. ) ; +#21759 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929801900, 75.79999999999969900, -28.70555803803047500 ) ) ; +#21760 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21761 = FACE_OUTER_BOUND ( 'NONE', #67566, .T. ) ; +#21762 = EDGE_LOOP ( 'NONE', ( #33634, #69450, #52841, #73204 ) ) ; +#21763 = FACE_OUTER_BOUND ( 'NONE', #6852, .T. ) ; +#21764 = EDGE_CURVE ( 'NONE', #34788, #39774, #27520, .T. ) ; +#21765 = ORIENTED_EDGE ( 'NONE', *, *, #9229, .T. ) ; +#21766 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655522100, 31.17701665379217600, -28.20555803802996000 ) ) ; +#21767 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#21768 = CONICAL_SURFACE ( 'NONE', #43839, 10.50000000000009600, 0.7853981633974500600 ) ; +#21769 = EDGE_CURVE ( 'NONE', #45917, #30222, #50000, .T. ) ; +#21770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21771 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823702100, 38.19543746431600100, -28.61277292027075700 ) ) ; +#21772 = ORIENTED_EDGE ( 'NONE', *, *, #67030, .T. ) ; +#21773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21774 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459548200, 79.08026449164334800, -28.70555803802997700 ) ) ; +#21775 = VERTEX_POINT ( 'NONE', #42546 ) ; +#21776 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972519200, 69.37488905616153500, -28.55192314908421700 ) ) ; +#21777 = ADVANCED_FACE ( 'NONE', ( #40125 ), #38147, .T. ) ; +#21778 = AXIS2_PLACEMENT_3D ( 'NONE', #10370, #79188, #47858 ) ; +#21779 = EDGE_CURVE ( 'NONE', #12827, #22393, #54719, .T. ) ; +#21780 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000135900, 67.22261628933253500, -28.70555803803030800 ) ) ; +#21781 = ADVANCED_FACE ( 'NONE', ( #25567 ), #69319, .T. ) ; +#21782 = CONICAL_SURFACE ( 'NONE', #59189, 10.00000000000009200, 0.7853981633974447300 ) ; +#21783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21784 = EDGE_CURVE ( 'NONE', #61971, #13063, #35590, .T. ) ; +#21785 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21786 = ORIENTED_EDGE ( 'NONE', *, *, #78731, .F. ) ; +#21787 = AXIS2_PLACEMENT_3D ( 'NONE', #69217, #31963, #75474 ) ; +#21788 = CONICAL_SURFACE ( 'NONE', #78514, 10.00000000000009200, 0.7853981633974447300 ) ; +#21789 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 49.00000000000000700, 6.794441961969995200 ) ) ; +#21790 = ORIENTED_EDGE ( 'NONE', *, *, #55404, .F. ) ; +#21791 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528136700, 41.46868088498121800, -28.51286550264512700 ) ) ; +#21792 = VERTEX_POINT ( 'NONE', #24349 ) ; +#21793 = ORIENTED_EDGE ( 'NONE', *, *, #23690, .T. ) ; +#21794 = ORIENTED_EDGE ( 'NONE', *, *, #41278, .F. ) ; +#21795 = FACE_OUTER_BOUND ( 'NONE', #20450, .T. ) ; +#21796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21797 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180780500, 59.94924284854683800, -28.20555803803030800 ) ) ; +#21798 = AXIS2_PLACEMENT_3D ( 'NONE', #19549, #44508, #50781 ) ; +#21799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21800 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 64.37738371066736000, -28.70555803803030800 ) ) ; +#21801 = EDGE_CURVE ( 'NONE', #29074, #28145, #71282, .T. ) ; +#21802 = ADVANCED_FACE ( 'NONE', ( #7031 ), #49052, .T. ) ; +#21803 = EDGE_CURVE ( 'NONE', #77479, #26934, #21132, .T. ) ; +#21804 = EDGE_LOOP ( 'NONE', ( #47460, #31297, #71470, #149 ) ) ; +#21805 = VERTEX_POINT ( 'NONE', #30877 ) ; +#21806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21807 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21808 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.00000000000000700, -1.205558038030005300 ) ) ; +#21809 = ORIENTED_EDGE ( 'NONE', *, *, #18598, .T. ) ; +#21810 = FACE_OUTER_BOUND ( 'NONE', #4130, .T. ) ; +#21811 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#21812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13717, #50899, #63480, #26220 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001679852151197428400 ), + .UNSPECIFIED. ) ; +#21813 = EDGE_CURVE ( 'NONE', #14827, #7046, #6639, .T. ) ; +#21814 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 14.16666666666667700, -9.205558038030003900 ) ) ; +#21815 = CARTESIAN_POINT ( 'NONE', ( 19.97705606745907800, 94.08848852611744500, -27.37938417251746500 ) ) ; +#21816 = AXIS2_PLACEMENT_3D ( 'NONE', #35996, #67000, #4970 ) ; +#21817 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21818 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21819 = FACE_OUTER_BOUND ( 'NONE', #51043, .T. ) ; +#21820 = VERTEX_POINT ( 'NONE', #80633 ) ; +#21821 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 17.50000000000001100, 2.454695999814380200 ) ) ; +#21822 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819507300, 81.65075715145330500, -28.20555803802997700 ) ) ; +#21823 = EDGE_LOOP ( 'NONE', ( #47638, #44669, #10138, #69180, #67191, #6983, #18224 ) ) ; +#21824 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 10.17701665379185300, -28.20555803802992800 ) ) ; +#21825 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 57.66666666666667100, 2.794441961969992100 ) ) ; +#21826 = CIRCLE ( 'NONE', #35492, 10.00000000000009200 ) ; +#21827 = AXIS2_PLACEMENT_3D ( 'NONE', #32468, #51182, #13989 ) ; +#21828 = VERTEX_POINT ( 'NONE', #12383 ) ; +#21829 = FACE_OUTER_BOUND ( 'NONE', #20090, .T. ) ; +#21830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21831 = VERTEX_POINT ( 'NONE', #55865 ) ; +#21832 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21833 = ORIENTED_EDGE ( 'NONE', *, *, #1844, .F. ) ; +#21834 = CIRCLE ( 'NONE', #15160, 10.00000000000009400 ) ; +#21835 = CIRCLE ( 'NONE', #72674, 10.50000000000009600 ) ; +#21836 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 69.63176086632792300, -28.70555803802997700 ) ) ; +#21837 = ORIENTED_EDGE ( 'NONE', *, *, #27746, .F. ) ; +#21838 = ORIENTED_EDGE ( 'NONE', *, *, #33223, .F. ) ; +#21839 = ORIENTED_EDGE ( 'NONE', *, *, #41208, .T. ) ; +#21840 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466623300, 18.83106028708477500, -28.57333386111661300 ) ) ; +#21841 = AXIS2_PLACEMENT_3D ( 'NONE', #65994, #47436, #34994 ) ; +#21842 = ADVANCED_FACE ( 'NONE', ( #23608 ), #3119, .T. ) ; +#21843 = EDGE_CURVE ( 'NONE', #22629, #22293, #19697, .T. ) ; +#21845 = FACE_OUTER_BOUND ( 'NONE', #76879, .T. ) ; +#21844 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#21846 = CARTESIAN_POINT ( 'NONE', ( -3.653616687319676700, 8.297294629097114800, -28.56190306242184800 ) ) ; +#21847 = ORIENTED_EDGE ( 'NONE', *, *, #17497, .T. ) ; +#21848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21849 = CIRCLE ( 'NONE', #10714, 10.00000000000009400 ) ; +#21850 = AXIS2_PLACEMENT_3D ( 'NONE', #28726, #72223, #34950 ) ; +#21851 = ORIENTED_EDGE ( 'NONE', *, *, #23102, .F. ) ; +#21852 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.30000000000008600, -28.70555803802992800 ) ) ; +#21853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21854 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66982, #10963, #73239, #35967 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.588823832830143500E-017, 0.001492013864174948100 ), + .UNSPECIFIED. ) ; +#21855 = ORIENTED_EDGE ( 'NONE', *, *, #57041, .T. ) ; +#21856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21857 = VERTEX_POINT ( 'NONE', #104 ) ; +#21858 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#21859 = PLANE ( 'NONE', #7282 ) ; +#21860 = EDGE_LOOP ( 'NONE', ( #45599, #21566, #23821 ) ) ; +#21861 = ORIENTED_EDGE ( 'NONE', *, *, #17759, .T. ) ; +#21862 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32079, #63642, #1581, #45058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043766800, 0.007919184322923407800 ), + .UNSPECIFIED. ) ; +#21863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21865 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#21866 = ADVANCED_FACE ( 'NONE', ( #21656 ), #34293, .F. ) ; +#21867 = FACE_OUTER_BOUND ( 'NONE', #48007, .T. ) ; +#21868 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730375200, 80.01262610361148100, -28.29936525552454900 ) ) ; +#21869 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21870 = CARTESIAN_POINT ( 'NONE', ( -3.790252861949572600E-014, 77.70389005397397900, -28.37519436813184000 ) ) ; +#21871 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.16749699759737200, -28.20555803803025800 ) ) ; +#21872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21873 = CARTESIAN_POINT ( 'NONE', ( 3.499999999986115100, 50.90050506339297000, -28.70555803803014400 ) ) ; +#21874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78342, #66104, #72370, #35111 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409715700 ), + .UNSPECIFIED. ) ; +#21875 = ORIENTED_EDGE ( 'NONE', *, *, #71245, .T. ) ; +#21876 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#21877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21878 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#21879 = EDGE_CURVE ( 'NONE', #10423, #5932, #50791, .T. ) ; +#21880 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105668900, 24.54999999999998600, -28.70555803802994200 ) ) ; +#21881 = ORIENTED_EDGE ( 'NONE', *, *, #16127, .T. ) ; +#21882 = CONICAL_SURFACE ( 'NONE', #75746, 10.50000000000009600, 0.7853981633974500600 ) ; +#21883 = EDGE_CURVE ( 'NONE', #33868, #21857, #72989, .T. ) ; +#21884 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21885 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#21886 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#21887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21888 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42521, #48760, #55038, #17796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898857700 ), + .UNSPECIFIED. ) ; +#21889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21890 = EDGE_CURVE ( 'NONE', #3823, #34194, #58512, .T. ) ; +#21891 = ADVANCED_FACE ( 'NONE', ( #52769 ), #17750, .T. ) ; +#21892 = EDGE_CURVE ( 'NONE', #43580, #51554, #44009, .T. ) ; +#21893 = AXIS2_PLACEMENT_3D ( 'NONE', #3216, #40492, #71516 ) ; +#21894 = CONICAL_SURFACE ( 'NONE', #33494, 10.00000000000009200, 0.7853981633974415100 ) ; +#21895 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 20.24660241562182300, -28.20555803802994200 ) ) ; +#21896 = ORIENTED_EDGE ( 'NONE', *, *, #69581, .T. ) ; +#21897 = CONICAL_SURFACE ( 'NONE', #69257, 10.00000000000009600, 0.7853981633974447300 ) ; +#21898 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 63.66666666666667900, 5.722645192245505700 ) ) ; +#21899 = AXIS2_PLACEMENT_3D ( 'NONE', #54622, #17370, #60908 ) ; +#21901 = ORIENTED_EDGE ( 'NONE', *, *, #47327, .T. ) ; +#21900 = EDGE_CURVE ( 'NONE', #7682, #11162, #29626, .T. ) ; +#21902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25213, #42309, #74979, #37685 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521659507800, 0.0009492057883278530300 ), + .UNSPECIFIED. ) ; +#21903 = EDGE_CURVE ( 'NONE', #19809, #80318, #67379, .T. ) ; +#21904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21905 = EDGE_CURVE ( 'NONE', #62732, #63749, #15120, .T. ) ; +#21906 = ORIENTED_EDGE ( 'NONE', *, *, #41543, .F. ) ; +#21907 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825243000, 90.16054007504463600, -28.34042301926880800 ) ) ; +#21908 = FACE_OUTER_BOUND ( 'NONE', #29422, .T. ) ; +#21909 = CONICAL_SURFACE ( 'NONE', #74717, 10.50000000000009600, 0.7853981633974500600 ) ; +#21910 = ORIENTED_EDGE ( 'NONE', *, *, #40701, .T. ) ; +#21911 = AXIS2_PLACEMENT_3D ( 'NONE', #25641, #31880, #62894 ) ; +#21912 = CARTESIAN_POINT ( 'NONE', ( 10.77874659791499400, 18.16476742015620300, -28.30311934730034200 ) ) ; +#21913 = FACE_OUTER_BOUND ( 'NONE', #27199, .T. ) ; +#21914 = AXIS2_PLACEMENT_3D ( 'NONE', #34019, #77536, #40259 ) ; +#21915 = ORIENTED_EDGE ( 'NONE', *, *, #44614, .T. ) ; +#21916 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#21917 = EDGE_CURVE ( 'NONE', #39193, #69047, #73241, .T. ) ; +#21918 = ORIENTED_EDGE ( 'NONE', *, *, #11452, .F. ) ; +#21919 = AXIS2_PLACEMENT_3D ( 'NONE', #77580, #40294, #3033 ) ; +#21920 = AXIS2_PLACEMENT_3D ( 'NONE', #28398, #65380, #65618 ) ; +#21921 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971200, 85.15853008474739700, -28.52629299565627000 ) ) ; +#21922 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466929000, 17.80869142985012100, -28.37223374938546500 ) ) ; +#21923 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21924 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#21925 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309802100, 65.79999999999999700, -28.70555803802997700 ) ) ; +#21926 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 35.00000000000000700, -12.20555803803000200 ) ) ; +#21927 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21928 = FACE_OUTER_BOUND ( 'NONE', #61323, .T. ) ; +#21929 = VERTEX_POINT ( 'NONE', #57746 ) ; +#21930 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 88.62623792124939800, -28.70555803802997700 ) ) ; +#21931 = FACE_OUTER_BOUND ( 'NONE', #66946, .T. ) ; +#21932 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174630400, 70.16054007504466500, -28.34042301926885100 ) ) ; +#21933 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21934 = EDGE_LOOP ( 'NONE', ( #8648, #2952, #50183 ) ) ; +#21935 = ORIENTED_EDGE ( 'NONE', *, *, #49805, .F. ) ; +#21936 = VERTEX_POINT ( 'NONE', #45192 ) ; +#21937 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21938 = ORIENTED_EDGE ( 'NONE', *, *, #26778, .F. ) ; +#21939 = CONICAL_SURFACE ( 'NONE', #22421, 10.50000000000009200, 0.7853981633974482800 ) ; +#21940 = VERTEX_POINT ( 'NONE', #64034 ) ; +#21941 = ADVANCED_FACE ( 'NONE', ( #5089 ), #80025, .F. ) ; +#21942 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999300, 91.59999999999998000, -28.70555803803001300 ) ) ; +#21943 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 75.79999999999984100, -28.70525300642875200 ) ) ; +#21944 = ORIENTED_EDGE ( 'NONE', *, *, #34244, .F. ) ; +#21945 = CONICAL_SURFACE ( 'NONE', #75871, 10.00000000000009200, 0.7853981633974447300 ) ; +#21946 = AXIS2_PLACEMENT_3D ( 'NONE', #80104, #42817, #5573 ) ; +#21947 = CARTESIAN_POINT ( 'NONE', ( 15.16958695401596600, 23.19875723892624100, -28.70555803803001600 ) ) ; +#21948 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654403300, 61.52472935029897600, -28.39317435246131200 ) ) ; +#21949 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, -2.666666666666664300, 5.722645192245503900 ) ) ; +#21950 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459512700, 52.51973550835648300, -28.70555803803011200 ) ) ; +#21951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21952 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21953 = VERTEX_POINT ( 'NONE', #51720 ) ; +#21954 = CIRCLE ( 'NONE', #7947, 10.00000000000009400 ) ; +#21955 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804058100, 36.94142842854297000, -28.37229765499279600 ) ) ; +#21956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21958 = ADVANCED_FACE ( 'NONE', ( #65463 ), #46892, .T. ) ; +#21959 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21960 = AXIS2_PLACEMENT_3D ( 'NONE', #64577, #70791, #14776 ) ; +#21961 = CARTESIAN_POINT ( 'NONE', ( 2.530136888809636700, 9.146957350529760300, -28.66910751791843700 ) ) ; +#21962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21963 = EDGE_CURVE ( 'NONE', #36682, #80726, #641, .T. ) ; +#21964 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#21965 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50990, #63301, #20042, #63572 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966636200, 0.0007670610367943091200 ), + .UNSPECIFIED. ) ; +#21966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21967 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 31.68315603019280500, -28.70555803802998800 ) ) ; +#21968 = CIRCLE ( 'NONE', #17288, 9.500000000000099500 ) ; +#21969 = ADVANCED_FACE ( 'NONE', ( #32337 ), #13852, .F. ) ; +#21970 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566617200, 14.05000000000002400, -28.70555803802992800 ) ) ; +#21971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21972 = ORIENTED_EDGE ( 'NONE', *, *, #22348, .T. ) ; +#21973 = VECTOR ( 'NONE', #12839, 1000.000000000000000 ) ; +#21974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21975 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7280, #50787, #26098, #69577 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402313800 ), + .UNSPECIFIED. ) ; +#21976 = CARTESIAN_POINT ( 'NONE', ( 4.957239735864561700, 85.79999999999967000, -28.53819074160716700 ) ) ; +#21978 = ORIENTED_EDGE ( 'NONE', *, *, #42721, .T. ) ; +#21977 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 87.94142842854287800, -28.20555803803047800 ) ) ; +#21979 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21980 = ADVANCED_FACE ( 'NONE', ( #15788 ), #61549, .F. ) ; +#21981 = FACE_OUTER_BOUND ( 'NONE', #15195, .T. ) ; +#21982 = FACE_OUTER_BOUND ( 'NONE', #40956, .T. ) ; +#21984 = EDGE_CURVE ( 'NONE', #12264, #31957, #66996, .T. ) ; +#21983 = VERTEX_POINT ( 'NONE', #64572 ) ; +#21985 = CARTESIAN_POINT ( 'NONE', ( 6.749133570464220400E-015, 37.17143691309409100, -28.36981695106778300 ) ) ; +#21986 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21988 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 6.666666666666687400, -6.705558038030000400 ) ) ; +#21990 = EDGE_CURVE ( 'NONE', #71219, #23355, #52496, .T. ) ; +#21989 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24959, #62240, #37437, #195 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584849200, 0.0005865296644889143300 ), + .UNSPECIFIED. ) ; +#21991 = FACE_OUTER_BOUND ( 'NONE', #64095, .T. ) ; +#21992 = ORIENTED_EDGE ( 'NONE', *, *, #3256, .F. ) ; +#21993 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656955200, 70.94992009694571800, -28.43638873268704600 ) ) ; +#21994 = EDGE_LOOP ( 'NONE', ( #53228, #18919, #79678, #34275 ) ) ; +#21995 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 41.00000000000000700, -1.205558038030002800 ) ) ; +#21996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21997 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#21998 = EDGE_CURVE ( 'NONE', #46876, #26563, #1169, .T. ) ; +#21999 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58388, #51812, #2324, #21141 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983718521443200E-007, 0.001076779618376860300 ), + .UNSPECIFIED. ) ; +#22000 = FACE_OUTER_BOUND ( 'NONE', #42663, .T. ) ; +#22001 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 6.000000000000005300, -1.205558038030005300 ) ) ; +#22002 = EDGE_CURVE ( 'NONE', #21089, #62166, #63493, .T. ) ; +#22003 = FACE_OUTER_BOUND ( 'NONE', #63691, .T. ) ; +#22004 = AXIS2_PLACEMENT_3D ( 'NONE', #71983, #34708, #78220 ) ; +#22005 = ORIENTED_EDGE ( 'NONE', *, *, #68129, .F. ) ; +#22006 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#22007 = EDGE_CURVE ( 'NONE', #60981, #70379, #38033, .T. ) ; +#22008 = VERTEX_POINT ( 'NONE', #80740 ) ; +#22009 = CARTESIAN_POINT ( 'NONE', ( 5.419876706283322000, 44.44999999999998900, 4.923305470094943500 ) ) ; +#22010 = EDGE_LOOP ( 'NONE', ( #77025, #61131, #16168, #80331 ) ) ; +#22011 = EDGE_LOOP ( 'NONE', ( #65915, #77108, #72099, #9409 ) ) ; +#22012 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 43.33333333333333600, 4.294441961970000500 ) ) ; +#22013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22014 = ORIENTED_EDGE ( 'NONE', *, *, #32354, .F. ) ; +#22015 = ORIENTED_EDGE ( 'NONE', *, *, #75170, .T. ) ; +#22016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22017 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343037700, 80.94992009694570400, -28.43638873268705300 ) ) ; +#22018 = FACE_OUTER_BOUND ( 'NONE', #58244, .T. ) ; +#22019 = CONICAL_SURFACE ( 'NONE', #78667, 10.00000000000009200, 0.7853981633974447300 ) ; +#22020 = EDGE_LOOP ( 'NONE', ( #19442, #70446, #65339 ) ) ; +#22021 = AXIS2_PLACEMENT_3D ( 'NONE', #24208, #67712, #30478 ) ; +#22022 = EDGE_CURVE ( 'NONE', #44982, #28925, #23616, .T. ) ; +#22023 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857247400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#22024 = EDGE_CURVE ( 'NONE', #69715, #48835, #30416, .T. ) ; +#22025 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22026 = EDGE_CURVE ( 'NONE', #33166, #44606, #9102, .T. ) ; +#22027 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890721900, 39.47143078992715500, -28.37063977681167200 ) ) ; +#22028 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000045300, 18.16749699759753200, -28.20555803803025800 ) ) ; +#22029 = ORIENTED_EDGE ( 'NONE', *, *, #75390, .F. ) ; +#22030 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#22031 = CIRCLE ( 'NONE', #3915, 10.00000000000009200 ) ; +#22032 = AXIS2_PLACEMENT_3D ( 'NONE', #8002, #51500, #14289 ) ; +#22033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22034 = ORIENTED_EDGE ( 'NONE', *, *, #47446, .F. ) ; +#22035 = CIRCLE ( 'NONE', #8423, 10.00000000000009400 ) ; +#22036 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 80.07141756547859800, -28.70555803803030800 ) ) ; +#22037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22038 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700700, 44.61903418172683900, -28.69431509262337700 ) ) ; +#22039 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857190500, 70.07141756547869700, -28.70555803803030800 ) ) ; +#22040 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#22041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22042 = AXIS2_PLACEMENT_3D ( 'NONE', #23908, #79928, #42631 ) ; +#22043 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 90.16749699759768100, -28.20555803802997700 ) ) ; +#22044 = AXIS2_PLACEMENT_3D ( 'NONE', #55815, #18579, #62105 ) ; +#22045 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22046 = ORIENTED_EDGE ( 'NONE', *, *, #41536, .F. ) ; +#22047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61273, #67496, #30274, #73773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684463971100, 0.001179659862023917300 ), + .UNSPECIFIED. ) ; +#22048 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230974700, 40.81139552890385900, -28.53900456328628000 ) ) ; +#22049 = CARTESIAN_POINT ( 'NONE', ( -17.40093558791467000, 89.90728766135833900, -28.41359472476244000 ) ) ; +#22050 = CARTESIAN_POINT ( 'NONE', ( -9.997978530266225400, 28.78907435382948400, -28.25433648786264500 ) ) ; +#22051 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#22052 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 46.83333333333335700, -9.205558038030003900 ) ) ; +#22053 = CIRCLE ( 'NONE', #42778, 10.00000000000009600 ) ; +#22054 = CARTESIAN_POINT ( 'NONE', ( 10.75693756550930400, 71.43482212736761000, -28.29548618595855600 ) ) ; +#22055 = ORIENTED_EDGE ( 'NONE', *, *, #5190, .F. ) ; +#22056 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.65857157145701700, -28.20555803802997700 ) ) ; +#22057 = CIRCLE ( 'NONE', #57178, 10.00000000000009200 ) ; +#22058 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#22059 = ORIENTED_EDGE ( 'NONE', *, *, #66103, .T. ) ; +#22060 = FACE_OUTER_BOUND ( 'NONE', #1318, .T. ) ; +#22061 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 59.97246552159072800, -28.38801640354892800 ) ) ; +#22062 = ADVANCED_FACE ( 'NONE', ( #36236 ), #481, .T. ) ; +#22063 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284929300, 30.82033471810043700, -28.30868034705251500 ) ) ; +#22064 = AXIS2_PLACEMENT_3D ( 'NONE', #30749, #5985, #74280 ) ; +#22065 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857306200, 36.92318720225497200, -28.70555803802995200 ) ) ; +#22066 = ORIENTED_EDGE ( 'NONE', *, *, #6966, .T. ) ; +#22067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22068 = AXIS2_PLACEMENT_3D ( 'NONE', #42266, #5023, #48506 ) ; +#22069 = CONICAL_SURFACE ( 'NONE', #24412, 10.50000000000009600, 0.7853981633974500600 ) ; +#22070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22071 = FACE_OUTER_BOUND ( 'NONE', #26203, .T. ) ; +#22072 = EDGE_LOOP ( 'NONE', ( #15027, #7731, #60034, #75925 ) ) ; +#22073 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 52.16666666666666400, 0.9380355014189836200 ) ) ; +#22074 = ADVANCED_FACE ( 'NONE', ( #48851 ), #26503, .T. ) ; +#22075 = EDGE_CURVE ( 'NONE', #28518, #46628, #75453, .T. ) ; +#22076 = AXIS2_PLACEMENT_3D ( 'NONE', #74806, #37778, #56282 ) ; +#22078 = ORIENTED_EDGE ( 'NONE', *, *, #73712, .F. ) ; +#22077 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#22079 = ADVANCED_FACE ( 'NONE', ( #43005 ), #74193, .T. ) ; +#22080 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 12.00000000000001100, 6.794441961969995200 ) ) ; +#22081 = ORIENTED_EDGE ( 'NONE', *, *, #3217, .F. ) ; +#22082 = CARTESIAN_POINT ( 'NONE', ( 22.62839286511265500, 95.41417080282423100, -25.17207516188158000 ) ) ; +#22083 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#22084 = ADVANCED_FACE ( 'NONE', ( #59591 ), #41074, .F. ) ; +#22085 = CONICAL_SURFACE ( 'NONE', #48561, 10.50000000000009600, 0.7853981633974500600 ) ; +#22086 = ORIENTED_EDGE ( 'NONE', *, *, #25660, .T. ) ; +#22087 = AXIS2_PLACEMENT_3D ( 'NONE', #72981, #22930, #41946 ) ; +#22088 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205873700, 49.58245724453603000, -28.27504145778805600 ) ) ; +#22089 = ORIENTED_EDGE ( 'NONE', *, *, #22505, .F. ) ; +#22090 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489519400, 9.940690926013788300, -28.35186440610861400 ) ) ; +#22091 = VERTEX_POINT ( 'NONE', #32044 ) ; +#22092 = EDGE_LOOP ( 'NONE', ( #42806, #63454, #58088, #60735 ) ) ; +#22093 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51018, #20073, #69820, #32561 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907013536900E-007, 0.0006651184466337343600 ), + .UNSPECIFIED. ) ; +#22094 = ORIENTED_EDGE ( 'NONE', *, *, #21191, .T. ) ; +#22095 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.62753447840815100, -28.38801640354867200 ) ) ; +#22096 = FACE_OUTER_BOUND ( 'NONE', #44532, .T. ) ; +#22097 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 15.33333333333334600, -5.535685056952199400 ) ) ; +#22098 = ORIENTED_EDGE ( 'NONE', *, *, #73003, .T. ) ; +#22099 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 69.60439022488283500, -28.70555803803047500 ) ) ; +#22100 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 55.49999999999998600, -7.061964498581016200 ) ) ; +#22101 = VERTEX_POINT ( 'NONE', #25806 ) ; +#22102 = CIRCLE ( 'NONE', #46063, 10.50000000000009900 ) ; +#22103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22104 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#22105 = EDGE_CURVE ( 'NONE', #42265, #56108, #44919, .T. ) ; +#22106 = ORIENTED_EDGE ( 'NONE', *, *, #58086, .F. ) ; +#22107 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386300, 49.66349705304866500, -28.30782889147481600 ) ) ; +#22108 = EDGE_CURVE ( 'NONE', #55473, #30197, #57613, .T. ) ; +#22109 = CIRCLE ( 'NONE', #33947, 9.500000000000095900 ) ; +#22110 = CARTESIAN_POINT ( 'NONE', ( -17.32934156052460800, 90.46865661974091200, -28.43089930266685500 ) ) ; +#22111 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.79999999999951400, -28.20555803803047800 ) ) ; +#22113 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 90.69966441803890700, -28.70555803802997700 ) ) ; +#22112 = FACE_OUTER_BOUND ( 'NONE', #50792, .T. ) ; +#22114 = EDGE_CURVE ( 'NONE', #42622, #2388, #61026, .T. ) ; +#22115 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#22116 = ORIENTED_EDGE ( 'NONE', *, *, #46011, .T. ) ; +#22117 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10677, #54178, #72964, #35698 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685175669285600E-007, 0.0005050261270287648900 ), + .UNSPECIFIED. ) ; +#22118 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 39.24722181384565500, -28.70555803802998400 ) ) ; +#22119 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849298400, 30.82033471810043700, -28.30868034705251200 ) ) ; +#22120 = EDGE_CURVE ( 'NONE', #39538, #75162, #46492, .T. ) ; +#22121 = EDGE_CURVE ( 'NONE', #62098, #20363, #28475, .T. ) ; +#22122 = CIRCLE ( 'NONE', #22431, 10.50000000000009600 ) ; +#22123 = ORIENTED_EDGE ( 'NONE', *, *, #75031, .T. ) ; +#22124 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#22125 = CARTESIAN_POINT ( 'NONE', ( -16.76918824634330800, 80.94994472024610800, -28.43636979168675400 ) ) ; +#22126 = ORIENTED_EDGE ( 'NONE', *, *, #17710, .T. ) ; +#22127 = CARTESIAN_POINT ( 'NONE', ( -17.30192380577544900, 59.84168709918190400, -28.43753768099856000 ) ) ; +#22128 = CARTESIAN_POINT ( 'NONE', ( 1.783306465195852100, 70.79999999999998300, -28.32841359973437500 ) ) ; +#22129 = ORIENTED_EDGE ( 'NONE', *, *, #21707, .F. ) ; +#22130 = CIRCLE ( 'NONE', #20656, 10.00000000000009600 ) ; +#22131 = CARTESIAN_POINT ( 'NONE', ( -17.06581962135466700, 48.59136393618549500, -28.49020639256002600 ) ) ; +#22132 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22134 = AXIS2_PLACEMENT_3D ( 'NONE', #2970, #46453, #9206 ) ; +#22135 = EDGE_CURVE ( 'NONE', #8161, #35510, #9934, .T. ) ; +#22136 = CARTESIAN_POINT ( 'NONE', ( -3.639502927797186900, 30.93250300240229200, -28.25438406275898700 ) ) ; +#22137 = EDGE_CURVE ( 'NONE', #37108, #55373, #32082, .T. ) ; +#22138 = ORIENTED_EDGE ( 'NONE', *, *, #13326, .T. ) ; +#22139 = CARTESIAN_POINT ( 'NONE', ( -17.90232563142810600, 81.36492708256345500, -28.27580664874148300 ) ) ; +#22140 = EDGE_CURVE ( 'NONE', #47284, #20372, #24534, .T. ) ; +#22141 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78620, #72366, #78338, #41321 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487555936100, 0.001085359101287170000 ), + .UNSPECIFIED. ) ; +#22142 = CARTESIAN_POINT ( 'NONE', ( 4.449431547384302900, 50.66712112140487500, -28.65429851891202500 ) ) ; +#22143 = CARTESIAN_POINT ( 'NONE', ( -24.99065331959981900, 96.91559684686993100, -19.15197332442235700 ) ) ; +#22144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22145 = AXIS2_PLACEMENT_3D ( 'NONE', #11278, #54769, #17536 ) ; +#22146 = FACE_OUTER_BOUND ( 'NONE', #17366, .T. ) ; +#22147 = ORIENTED_EDGE ( 'NONE', *, *, #52061, .T. ) ; +#22148 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543114100, 71.36477483291889700, -28.27573853395004700 ) ) ; +#22149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22150 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 41.24660241562190100, -28.20555803802996700 ) ) ; +#22151 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#22152 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900900300, 31.03732497909458500, -28.41043597897467200 ) ) ; +#22153 = ORIENTED_EDGE ( 'NONE', *, *, #10563, .F. ) ; +#22154 = AXIS2_PLACEMENT_3D ( 'NONE', #13976, #26236, #1436 ) ; +#22155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22156 = AXIS2_PLACEMENT_3D ( 'NONE', #37232, #43486, #31019 ) ; +#22157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22158 = AXIS2_PLACEMENT_3D ( 'NONE', #6857, #50340, #13152 ) ; +#22159 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543598800, 60.07527064970111800, -28.39317435246122300 ) ) ; +#22160 = CONICAL_SURFACE ( 'NONE', #71361, 10.50000000000009800, 0.7853981633974518300 ) ; +#22161 = CIRCLE ( 'NONE', #65781, 10.50000000000009600 ) ; +#22162 = ORIENTED_EDGE ( 'NONE', *, *, #25007, .T. ) ; +#22163 = ORIENTED_EDGE ( 'NONE', *, *, #80251, .T. ) ; +#22164 = EDGE_LOOP ( 'NONE', ( #10682, #14725, #25961 ) ) ; +#22165 = VERTEX_POINT ( 'NONE', #32833 ) ; +#22166 = ORIENTED_EDGE ( 'NONE', *, *, #15899, .T. ) ; +#22167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4420, #41669, #23200, #66720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.919124238417039900E-005, 0.0003659026359592465100 ), + .UNSPECIFIED. ) ; +#22168 = ORIENTED_EDGE ( 'NONE', *, *, #63742, .F. ) ; +#22169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22170 = ADVANCED_FACE ( 'NONE', ( #11899 ), #6035, .T. ) ; +#22171 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 61.49999999999999300, -7.061964498581022400 ) ) ; +#22172 = AXIS2_PLACEMENT_3D ( 'NONE', #54827, #23858, #11345 ) ; +#22173 = ORIENTED_EDGE ( 'NONE', *, *, #49365, .F. ) ; +#22174 = EDGE_CURVE ( 'NONE', #14827, #51297, #17629, .T. ) ; +#22175 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658263800, 51.44848545219034000, -28.67627428870436600 ) ) ; +#22176 = ADVANCED_FACE ( 'NONE', ( #55655 ), #53709, .T. ) ; +#22177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22178 = CIRCLE ( 'NONE', #24622, 9.500000000000097700 ) ; +#22179 = ORIENTED_EDGE ( 'NONE', *, *, #49012, .F. ) ; +#22180 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#22181 = EDGE_CURVE ( 'NONE', #5741, #44749, #70244, .T. ) ; +#22182 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999990700, 55.66666666666670000, 5.722645192245508400 ) ) ; +#22183 = VERTEX_POINT ( 'NONE', #20615 ) ; +#22184 = AXIS2_PLACEMENT_3D ( 'NONE', #52845, #59111, #21864 ) ; +#22185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22186 = CONICAL_SURFACE ( 'NONE', #2633, 10.50000000000009600, 0.7853981633974518300 ) ; +#22187 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 49.63131911501876200, -28.51286550264510200 ) ) ; +#22189 = ORIENTED_EDGE ( 'NONE', *, *, #7276, .F. ) ; +#22188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22190 = ADVANCED_FACE ( 'NONE', ( #39094 ), #4080, .F. ) ; +#22191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22192 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714229600, 15.92318720225459400, -28.70555803803025800 ) ) ; +#22193 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#22194 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 32.83333333333333600, 9.794441961969999600 ) ) ; +#22195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22196 = AXIS2_PLACEMENT_3D ( 'NONE', #7435, #19983, #69732 ) ; +#22197 = CARTESIAN_POINT ( 'NONE', ( -4.035907765261590000, 39.00212297965120500, -28.25344967589749200 ) ) ; +#22198 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#22199 = FACE_OUTER_BOUND ( 'NONE', #21045, .T. ) ; +#22200 = VERTEX_POINT ( 'NONE', #70635 ) ; +#22201 = ORIENTED_EDGE ( 'NONE', *, *, #11651, .F. ) ; +#22202 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 51.99560977511662000, -28.70555803802997700 ) ) ; +#22203 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#22204 = CIRCLE ( 'NONE', #37781, 10.00000000000009200 ) ; +#22205 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865853500, 20.18727262089430100, -28.28853693900640900 ) ) ; +#22206 = AXIS2_PLACEMENT_3D ( 'NONE', #29808, #73295, #36027 ) ; +#22207 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14193, #69929, #20455, #63991 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345058700, 0.0008131256040089807900 ), + .UNSPECIFIED. ) ; +#22208 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 22.89610994602603400, -28.37519436813181200 ) ) ; +#22209 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#22210 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 81.35277818615432500, -28.70555803802999500 ) ) ; +#22211 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22212 = EDGE_CURVE ( 'NONE', #2201, #33231, #3125, .T. ) ; +#22213 = CONICAL_SURFACE ( 'NONE', #33816, 10.00000000000009200, 0.7853981633974447300 ) ; +#22214 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 67.33333333333334300, -5.535685056952199400 ) ) ; +#22215 = ORIENTED_EDGE ( 'NONE', *, *, #33832, .T. ) ; +#22216 = PLANE ( 'NONE', #36835 ) ; +#22217 = ORIENTED_EDGE ( 'NONE', *, *, #13801, .T. ) ; +#22218 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999972900, 90.16749699759753900, -28.20555803803014400 ) ) ; +#22219 = ORIENTED_EDGE ( 'NONE', *, *, #24281, .T. ) ; +#22220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22221 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#22222 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22223 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22224 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000381000, 89.63176086632779500, -28.70555803802999500 ) ) ; +#22225 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198450200, 90.69966441803909200, -28.70555803803014400 ) ) ; +#22226 = FACE_OUTER_BOUND ( 'NONE', #12102, .T. ) ; +#22227 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 83.43454006867095500, -28.70555803803024400 ) ) ; +#22228 = CONICAL_SURFACE ( 'NONE', #76113, 10.50000000000009600, 0.7853981633974518300 ) ; +#22229 = EDGE_LOOP ( 'NONE', ( #62745, #50937, #73923, #28236, #24824 ) ) ; +#22230 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 51.65075715145312800, -28.20555803802997700 ) ) ; +#22231 = CARTESIAN_POINT ( 'NONE', ( -17.36049707220279700, 20.43250300240229200, -28.25438406275897000 ) ) ; +#22233 = EDGE_CURVE ( 'NONE', #45576, #30748, #69457, .T. ) ; +#22232 = ORIENTED_EDGE ( 'NONE', *, *, #12505, .T. ) ; +#22234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22235 = ORIENTED_EDGE ( 'NONE', *, *, #9571, .T. ) ; +#22236 = ORIENTED_EDGE ( 'NONE', *, *, #30269, .F. ) ; +#22237 = CARTESIAN_POINT ( 'NONE', ( 16.33099763933823900, 14.62682920859723600, -28.62115403300396500 ) ) ; +#22238 = ORIENTED_EDGE ( 'NONE', *, *, #29548, .F. ) ; +#22239 = ORIENTED_EDGE ( 'NONE', *, *, #24636, .F. ) ; +#22240 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194906300, 66.76150692817331800, -28.68631150211663400 ) ) ; +#22241 = ORIENTED_EDGE ( 'NONE', *, *, #35009, .F. ) ; +#22242 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007437100, 38.31967837323414700, -28.55467576046956800 ) ) ; +#22243 = AXIS2_PLACEMENT_3D ( 'NONE', #75021, #37722, #472 ) ; +#22244 = CARTESIAN_POINT ( 'NONE', ( -12.10011726479567600, 35.05000000000001800, -28.53808257741933100 ) ) ; +#22245 = ORIENTED_EDGE ( 'NONE', *, *, #73982, .T. ) ; +#22246 = EDGE_CURVE ( 'NONE', #4729, #49049, #55005, .T. ) ; +#22247 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#22248 = EDGE_CURVE ( 'NONE', #68985, #24911, #37146, .T. ) ; +#22249 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007600, 53.42856308690550500, -28.36981695106818100 ) ) ; +#22250 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339104700, 51.46283204837309500, -28.48697406221716100 ) ) ; +#22251 = ADVANCED_FACE ( 'NONE', ( #72240 ), #68306, .T. ) ; +#22252 = EDGE_CURVE ( 'NONE', #2388, #21940, #40541, .T. ) ; +#22253 = CONICAL_SURFACE ( 'NONE', #39121, 10.00000000000009200, 0.7853981633974447300 ) ; +#22254 = AXIS2_PLACEMENT_3D ( 'NONE', #80286, #30540, #36751 ) ; +#22256 = ORIENTED_EDGE ( 'NONE', *, *, #7094, .F. ) ; +#22255 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#22257 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730374300, 81.58737389638862700, -28.29936525552440700 ) ) ; +#22258 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535000, 55.79999999999999000, -28.63843632546336000 ) ) ; +#22259 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 4.500000000000002700, 6.847000845227641200 ) ) ; +#22260 = EDGE_LOOP ( 'NONE', ( #35017, #56098, #37973 ) ) ; +#22261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28896, #78639, #22856, #66385 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402675324091675800E-007, 0.0002930379123883696200 ), + .UNSPECIFIED. ) ; +#22262 = CONICAL_SURFACE ( 'NONE', #29747, 10.50000000000009600, 0.7853981633974518300 ) ; +#22263 = ADVANCED_FACE ( 'NONE', ( #20637 ), #9126, .T. ) ; +#22264 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 38.83333333333335000, -2.545304000185615800 ) ) ; +#22265 = AXIS2_PLACEMENT_3D ( 'NONE', #76418, #39142, #1885 ) ; +#22266 = AXIS2_PLACEMENT_3D ( 'NONE', #4984, #48466, #11262 ) ; +#22267 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146282700, 90.34267608797584600, -28.20555803803047800 ) ) ; +#22268 = ORIENTED_EDGE ( 'NONE', *, *, #54396, .F. ) ; +#22269 = EDGE_CURVE ( 'NONE', #18214, #41714, #26116, .T. ) ; +#22270 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 3.833333333333348100, -3.349151577478984600 ) ) ; +#22271 = AXIS2_PLACEMENT_3D ( 'NONE', #31562, #62559, #68808 ) ; +#22272 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22273 = CONICAL_SURFACE ( 'NONE', #23385, 10.50000000000009600, 0.7853981633974500600 ) ; +#22274 = ORIENTED_EDGE ( 'NONE', *, *, #37337, .F. ) ; +#22275 = CARTESIAN_POINT ( 'NONE', ( 8.568660292288708300, 44.45000000000003100, 1.489531021415869700 ) ) ; +#22276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22277 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 41.16666666666667100, -4.152999154772358800 ) ) ; +#22278 = EDGE_LOOP ( 'NONE', ( #66754, #44971, #52066 ) ) ; +#22279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22280 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136828500, 20.67041185698244700, -28.27321389036145800 ) ) ; +#22281 = EDGE_CURVE ( 'NONE', #45559, #68751, #22583, .T. ) ; +#22282 = AXIS2_PLACEMENT_3D ( 'NONE', #58678, #21448, #64980 ) ; +#22283 = AXIS2_PLACEMENT_3D ( 'NONE', #4431, #41953, #4695 ) ; +#22284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22285 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830882000, 38.95045548864058600, -28.33400579219035000 ) ) ; +#22286 = ADVANCED_FACE ( 'NONE', ( #18680 ), #33261, .F. ) ; +#22287 = CARTESIAN_POINT ( 'NONE', ( 2.421150954501213500, 92.13371821560551200, -28.70555803803002000 ) ) ; +#22288 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 20.67701665379220800, -28.20555803802994500 ) ) ; +#22289 = FACE_OUTER_BOUND ( 'NONE', #66722, .T. ) ; +#22290 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701863500, 55.79999999999997600, -28.70555803802997700 ) ) ; +#22291 = CIRCLE ( 'NONE', #16093, 10.50000000000009600 ) ; +#22292 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 80.16054007504462200, -28.34042301926884400 ) ) ; +#22293 = VERTEX_POINT ( 'NONE', #15690 ) ; +#22294 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655937400, 17.92298334620740600, -28.20555803802993500 ) ) ; +#22296 = VERTEX_POINT ( 'NONE', #59196 ) ; +#22295 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#22297 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922503000, 60.09037803491502000, -28.29483400905891300 ) ) ; +#22298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22299 = ORIENTED_EDGE ( 'NONE', *, *, #52453, .F. ) ; +#22300 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22301 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61775, #5725, #74285, #36978 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807303700, 0.0005317208426585044500 ), + .UNSPECIFIED. ) ; +#22302 = CONICAL_SURFACE ( 'NONE', #7091, 10.50000000000009600, 0.7853981633974500600 ) ; +#22303 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714270500, 26.42318720225497900, -28.70555803802994200 ) ) ; +#22304 = VERTEX_POINT ( 'NONE', #65490 ) ; +#22305 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718935600, 51.13768531620325300, -28.37082013777818900 ) ) ; +#22306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22307 = FACE_OUTER_BOUND ( 'NONE', #72980, .T. ) ; +#22308 = AXIS2_PLACEMENT_3D ( 'NONE', #70964, #33704, #77221 ) ; +#22309 = ORIENTED_EDGE ( 'NONE', *, *, #30943, .F. ) ; +#22310 = EDGE_LOOP ( 'NONE', ( #63150, #55610, #28585, #6648, #9258 ) ) ; +#22311 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 44.66666666666667100, 5.722645192245505700 ) ) ; +#22312 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#22313 = ORIENTED_EDGE ( 'NONE', *, *, #40347, .T. ) ; +#22314 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#22315 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78653, #10098, #4095, #47588, #10369, #53874, #16620, #60151, #22877, #66399, #29185, #72658, #35413, #78923, #41619, #4366, #47857, #10640, #54126, #16895, #60429, #23148, #66665, #29439, #72926, #35660, #79187, #41887, #4634, #48124, #10902, #54404, #17156, #60687, #23408, #66930, #29696, #73192 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000188500, 0.1875000000000280900, 0.2187500000000327500, 0.2343750000000354200, 0.2421875000000367500, 0.2460937500000375300, 0.2480468750000376900, 0.2490234375000376100, 0.2500000000000374700, 0.3750000000000401900, 0.4375000000000413000, 0.4687500000000421300, 0.4843750000000427400, 0.4921875000000428000, 0.4960937500000425200, 0.5000000000000423000, 0.6250000000000328600, 0.6875000000000283100, 0.7187500000000262000, 0.7343750000000247600, 0.7500000000000233100, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#22316 = FACE_OUTER_BOUND ( 'NONE', #16317, .T. ) ; +#22317 = ORIENTED_EDGE ( 'NONE', *, *, #27376, .T. ) ; +#22318 = ORIENTED_EDGE ( 'NONE', *, *, #49298, .F. ) ; +#22319 = ORIENTED_EDGE ( 'NONE', *, *, #20777, .F. ) ; +#22320 = ORIENTED_EDGE ( 'NONE', *, *, #49189, .F. ) ; +#22321 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31717, #68958, #44155, #6940 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01412728837592738500, 0.01489823379111374800 ), + .UNSPECIFIED. ) ; +#22322 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079881900, 41.43383669612129000, -28.27375072930956200 ) ) ; +#22323 = AXIS2_PLACEMENT_3D ( 'NONE', #32910, #45386, #1887 ) ; +#22325 = ORIENTED_EDGE ( 'NONE', *, *, #30389, .T. ) ; +#22324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22327 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868446100, 29.01513784120218300, -28.32821106612154000 ) ) ; +#22328 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37815, #68583, #50312, #13108 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478978545530500E-007, 0.0002930330874876893500 ), + .UNSPECIFIED. ) ; +#22329 = ORIENTED_EDGE ( 'NONE', *, *, #25732, .T. ) ; +#22330 = FACE_OUTER_BOUND ( 'NONE', #73059, .T. ) ; +#22331 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22332 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 54.33333333333334300, -5.205558038030008400 ) ) ; +#22333 = EDGE_LOOP ( 'NONE', ( #64173, #58414, #13959, #66343 ) ) ; +#22334 = ORIENTED_EDGE ( 'NONE', *, *, #63456, .T. ) ; +#22335 = EDGE_LOOP ( 'NONE', ( #49576, #78781, #52262 ) ) ; +#22336 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22337 = ORIENTED_EDGE ( 'NONE', *, *, #32136, .F. ) ; +#22338 = ORIENTED_EDGE ( 'NONE', *, *, #44402, .F. ) ; +#22339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22340 = LINE ( 'NONE', #67010, #68077 ) ; +#22341 = CARTESIAN_POINT ( 'NONE', ( 24.43947605490815500, 96.31973788710895700, -22.00723819722197700 ) ) ; +#22342 = EDGE_LOOP ( 'NONE', ( #53250, #8159, #7661, #5685 ) ) ; +#22343 = CARTESIAN_POINT ( 'NONE', ( 2.343046065458664900, 89.08026449163853000, -28.70555803802998800 ) ) ; +#22344 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#22345 = ORIENTED_EDGE ( 'NONE', *, *, #80727, .T. ) ; +#22346 = ADVANCED_FACE ( 'NONE', ( #7955 ), #166, .T. ) ; +#22347 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345549300, 51.52472935029871300, -28.39317435246180600 ) ) ; +#22348 = EDGE_CURVE ( 'NONE', #15598, #49333, #11646, .T. ) ; +#22349 = CONICAL_SURFACE ( 'NONE', #28064, 10.50000000000009600, 0.7853981633974500600 ) ; +#22351 = ORIENTED_EDGE ( 'NONE', *, *, #43430, .T. ) ; +#22350 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 77.94142842854304800, -28.20555803803030800 ) ) ; +#22352 = EDGE_CURVE ( 'NONE', #5117, #24198, #77942, .T. ) ; +#22353 = EDGE_LOOP ( 'NONE', ( #20466, #15287, #37018, #17327 ) ) ; +#22354 = ADVANCED_FACE ( 'NONE', ( #16723 ), #47838, .F. ) ; +#22355 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 13.16666666666667300, 3.794441961969996900 ) ) ; +#22356 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20672, #57932, #33175, #76673 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402563600 ), + .UNSPECIFIED. ) ; +#22357 = EDGE_CURVE ( 'NONE', #27788, #57450, #63504, .T. ) ; +#22358 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#22359 = CARTESIAN_POINT ( 'NONE', ( 1.272691540716732500, 65.79999999999999700, -28.53979898350160500 ) ) ; +#22360 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 53.33333333333334300, 5.722645192245503900 ) ) ; +#22361 = EDGE_CURVE ( 'NONE', #31176, #77007, #48986, .T. ) ; +#22362 = AXIS2_PLACEMENT_3D ( 'NONE', #48553, #55107, #67363 ) ; +#22363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22364 = CONICAL_SURFACE ( 'NONE', #26465, 10.50000000000009600, 0.7853981633974500600 ) ; +#22365 = ADVANCED_FACE ( 'NONE', ( #49772 ), #14767, .T. ) ; +#22366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22367 = FACE_OUTER_BOUND ( 'NONE', #16392, .T. ) ; +#22368 = VERTEX_POINT ( 'NONE', #3968 ) ; +#22369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22370 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22371 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059900, 53.65857157145701000, -28.37229765499282100 ) ) ; +#22372 = ORIENTED_EDGE ( 'NONE', *, *, #66574, .T. ) ; +#22373 = AXIS2_PLACEMENT_3D ( 'NONE', #39786, #39514, #8493 ) ; +#22374 = EDGE_CURVE ( 'NONE', #45353, #14035, #31336, .T. ) ; +#22375 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 55.79999999999999000, -28.20555803802997700 ) ) ; +#22376 = EDGE_CURVE ( 'NONE', #9915, #40041, #64446, .T. ) ; +#22377 = EDGE_CURVE ( 'NONE', #56951, #13553, #35248, .T. ) ; +#22378 = ADVANCED_FACE ( 'NONE', ( #2106 ), #12840, .F. ) ; +#22380 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#22379 = AXIS2_PLACEMENT_3D ( 'NONE', #77404, #64933, #27662 ) ; +#22381 = CONICAL_SURFACE ( 'NONE', #67522, 10.00000000000009200, 0.7853981633974447300 ) ; +#22382 = ORIENTED_EDGE ( 'NONE', *, *, #40463, .F. ) ; +#22383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22384 = CIRCLE ( 'NONE', #13000, 10.50000000000009200 ) ; +#22385 = CARTESIAN_POINT ( 'NONE', ( 10.62849472960800200, 51.43250300240196500, -28.25053119339309800 ) ) ; +#22386 = ORIENTED_EDGE ( 'NONE', *, *, #24493, .F. ) ; +#22387 = AXIS2_PLACEMENT_3D ( 'NONE', #54295, #17057, #60578 ) ; +#22388 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 41.24660241562189400, -28.20555803802996700 ) ) ; +#22389 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22390 = ORIENTED_EDGE ( 'NONE', *, *, #51633, .F. ) ; +#22391 = CONICAL_SURFACE ( 'NONE', #39145, 10.00000000000009200, 0.7853981633974447300 ) ; +#22392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22393 = VERTEX_POINT ( 'NONE', #35550 ) ; +#22394 = AXIS2_PLACEMENT_3D ( 'NONE', #49629, #18665, #6149 ) ; +#22395 = ORIENTED_EDGE ( 'NONE', *, *, #75014, .T. ) ; +#22396 = EDGE_LOOP ( 'NONE', ( #38323, #1759, #25452, #13055, #70988 ) ) ; +#22397 = EDGE_LOOP ( 'NONE', ( #57436, #66486, #75940 ) ) ; +#22398 = ORIENTED_EDGE ( 'NONE', *, *, #45262, .F. ) ; +#22399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22401 = ORIENTED_EDGE ( 'NONE', *, *, #77633, .F. ) ; +#22400 = EDGE_CURVE ( 'NONE', #39696, #8948, #45879, .T. ) ; +#22402 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 29.19949493661175700, -28.70555803802994200 ) ) ; +#22403 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 80.13716795162660800, -28.48697406221657100 ) ) ; +#22404 = AXIS2_PLACEMENT_3D ( 'NONE', #25241, #62487, #37710 ) ; +#22405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22406 = AXIS2_PLACEMENT_3D ( 'NONE', #8477, #51977, #14766 ) ; +#22407 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#22408 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#22409 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 28.66749699759768400, -28.20555803802994200 ) ) ; +#22410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22411 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#22412 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534310500, 60.94992009694566100, -28.43638873268714600 ) ) ; +#22413 = CONICAL_SURFACE ( 'NONE', #31787, 10.50000000000009800, 0.7853981633974500600 ) ; +#22414 = EDGE_LOOP ( 'NONE', ( #58832, #51151, #22416, #64958 ) ) ; +#22415 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22416 = ORIENTED_EDGE ( 'NONE', *, *, #29536, .T. ) ; +#22417 = ORIENTED_EDGE ( 'NONE', *, *, #36748, .F. ) ; +#22418 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378045200, 90.82516071402460500, -28.57108397021912800 ) ) ; +#22419 = ORIENTED_EDGE ( 'NONE', *, *, #13923, .F. ) ; +#22420 = ORIENTED_EDGE ( 'NONE', *, *, #60632, .T. ) ; +#22421 = AXIS2_PLACEMENT_3D ( 'NONE', #26422, #32637, #63666 ) ; +#22422 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#22423 = CONICAL_SURFACE ( 'NONE', #68642, 10.00000000000009600, 0.7853981633974447300 ) ; +#22424 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22426 = ORIENTED_EDGE ( 'NONE', *, *, #5484, .T. ) ; +#22427 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 65.79999999999999700, -28.20555803802997700 ) ) ; +#22428 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22429 = VERTEX_POINT ( 'NONE', #23022 ) ; +#22430 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74413, #49335, #43362, #6122 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.666343907633296100E-017, 0.001246264537621131600 ), + .UNSPECIFIED. ) ; +#22431 = AXIS2_PLACEMENT_3D ( 'NONE', #58487, #21246, #64772 ) ; +#22432 = FACE_OUTER_BOUND ( 'NONE', #75917, .T. ) ; +#22433 = ORIENTED_EDGE ( 'NONE', *, *, #28420, .F. ) ; +#22434 = EDGE_LOOP ( 'NONE', ( #19745, #33403, #41700, #72817 ) ) ; +#22435 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 59.33333333333334300, 2.794441961969998300 ) ) ; +#22436 = AXIS2_PLACEMENT_3D ( 'NONE', #19247, #62794, #25536 ) ; +#22437 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34184, #71442, #52924, #15686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0002673660010786423800 ), + .UNSPECIFIED. ) ; +#22438 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22440 = ADVANCED_FACE ( 'NONE', ( #62468 ), #43928, .T. ) ; +#22441 = EDGE_CURVE ( 'NONE', #9915, #61816, #60532, .T. ) ; +#22442 = AXIS2_PLACEMENT_3D ( 'NONE', #43793, #6565, #50037 ) ; +#22443 = FACE_OUTER_BOUND ( 'NONE', #4664, .T. ) ; +#22444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22445 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551024700, 53.50000000000000700, -7.061964498581026800 ) ) ; +#22446 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38450, #75727, #1203, #44680 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.295428941768624900E-016, 0.001179148174662838500 ), + .UNSPECIFIED. ) ; +#22447 = ORIENTED_EDGE ( 'NONE', *, *, #80274, .T. ) ; +#22448 = ORIENTED_EDGE ( 'NONE', *, *, #76193, .F. ) ; +#22449 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686885200, 90.01994747561637700, -28.24986299608865200 ) ) ; +#22450 = VERTEX_POINT ( 'NONE', #60559 ) ; +#22451 = ADVANCED_FACE ( 'NONE', ( #77046 ), #75108, .T. ) ; +#22452 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#22453 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7341, #32124, #44567, #50849, #13652, #57147, #19893, #63422 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.001335052463302535600, 0.002002578694953800800, 0.002670104926605065600 ), + .UNSPECIFIED. ) ; +#22454 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#22455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22456 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22457 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 30.66666666666668200, -10.73183747965883100 ) ) ; +#22458 = CARTESIAN_POINT ( 'NONE', ( 4.118935526109083000, 70.49763722318492400, -28.32100408376096100 ) ) ; +#22459 = CONICAL_SURFACE ( 'NONE', #26324, 10.00000000000009200, 0.7853981633974447300 ) ; +#22460 = ORIENTED_EDGE ( 'NONE', *, *, #11191, .T. ) ; +#22461 = EDGE_LOOP ( 'NONE', ( #37203, #21308, #19288, #40511 ) ) ; +#22462 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#22463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22464 = EDGE_CURVE ( 'NONE', #38688, #39291, #10884, .T. ) ; +#22465 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851639500, 13.09761904761934700, -28.70555803802992800 ) ) ; +#22466 = ADVANCED_FACE ( 'NONE', ( #27445 ), #11049, .T. ) ; +#22467 = CIRCLE ( 'NONE', #43788, 9.500000000000097700 ) ; +#22468 = EDGE_CURVE ( 'NONE', #11917, #19349, #51713, .T. ) ; +#22469 = EDGE_LOOP ( 'NONE', ( #63228, #28141, #18202, #37754, #43177, #39703 ) ) ; +#22470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22471 = VERTEX_POINT ( 'NONE', #11322 ) ; +#22472 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609040400, 60.13716795162677200, -28.48697406221666400 ) ) ; +#22473 = ORIENTED_EDGE ( 'NONE', *, *, #30938, .F. ) ; +#22474 = CARTESIAN_POINT ( 'NONE', ( -14.83757230220728500, 8.874221649654831600, -28.64240249045230500 ) ) ; +#22475 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#22476 = ADVANCED_FACE ( 'NONE', ( #29421 ), #5038, .T. ) ; +#22477 = VERTEX_POINT ( 'NONE', #79855 ) ; +#22478 = EDGE_CURVE ( 'NONE', #54555, #12694, #58549, .T. ) ; +#22479 = ADVANCED_FACE ( 'NONE', ( #79031 ), #40047, .T. ) ; +#22480 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150687000, 30.82033471810043300, -28.30868034705251200 ) ) ; +#22481 = EDGE_CURVE ( 'NONE', #22101, #7744, #56594, .T. ) ; +#22483 = EDGE_LOOP ( 'NONE', ( #17563, #57723, #69154, #56444 ) ) ; +#22482 = AXIS2_PLACEMENT_3D ( 'NONE', #31027, #74537, #37237 ) ; +#22484 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429200, 36.92318720225498700, -28.70555803802995200 ) ) ; +#22485 = CIRCLE ( 'NONE', #28111, 10.00000000000009200 ) ; +#22486 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 65.16666666666668600, 3.794441961969996900 ) ) ; +#22487 = ORIENTED_EDGE ( 'NONE', *, *, #4717, .F. ) ; +#22488 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 101.5999999999999900, -1.205558038030003500 ) ) ; +#22489 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385219800, 49.49322649091141800, -28.30799595738881900 ) ) ; +#22490 = ORIENTED_EDGE ( 'NONE', *, *, #10581, .F. ) ; +#22491 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22492 = EDGE_LOOP ( 'NONE', ( #65195, #6921, #12751 ) ) ; +#22493 = ORIENTED_EDGE ( 'NONE', *, *, #13784, .T. ) ; +#22494 = ORIENTED_EDGE ( 'NONE', *, *, #62015, .F. ) ; +#22495 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 22.65857157145701000, -28.20555803802995200 ) ) ; +#22496 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653716800, 70.20590598242348800, -28.39369363572375000 ) ) ; +#22497 = FACE_OUTER_BOUND ( 'NONE', #61604, .T. ) ; +#22498 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#22499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22500 = AXIS2_PLACEMENT_3D ( 'NONE', #14701, #76703, #33193 ) ; +#22501 = ORIENTED_EDGE ( 'NONE', *, *, #6405, .F. ) ; +#22502 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.523234146875355000E-016 ) ) ; +#22503 = EDGE_CURVE ( 'NONE', #37185, #9176, #34581, .T. ) ; +#22504 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#22505 = EDGE_CURVE ( 'NONE', #80780, #56550, #20118, .T. ) ; +#22506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33636, #58397, #2601, #46114 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646421900, 0.0009605145132142456100 ), + .UNSPECIFIED. ) ; +#22507 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999972900, 90.16749699759753900, -28.20555803803014400 ) ) ; +#22508 = EDGE_CURVE ( 'NONE', #22450, #32428, #25484, .T. ) ; +#22509 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004000, 60.69949493661175700, -28.70555803802997700 ) ) ; +#22510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22512 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#22513 = AXIS2_PLACEMENT_3D ( 'NONE', #66933, #29704, #73196 ) ; +#22514 = CARTESIAN_POINT ( 'NONE', ( -10.36049707220279700, 9.932503002402295800, -28.25438406275895900 ) ) ; +#22515 = CONICAL_SURFACE ( 'NONE', #8100, 10.50000000000009600, 0.7853981633974500600 ) ; +#22516 = ORIENTED_EDGE ( 'NONE', *, *, #74586, .T. ) ; +#22517 = CARTESIAN_POINT ( 'NONE', ( 16.56643609059900900, 15.22507724664278900, -28.58387515229136600 ) ) ; +#22518 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22519 = EDGE_CURVE ( 'NONE', #6870, #49207, #5638, .T. ) ; +#22520 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326100, 80.79999999999991200, -28.55171188418386000 ) ) ; +#22521 = AXIS2_PLACEMENT_3D ( 'NONE', #66768, #79028, #47954 ) ; +#22522 = AXIS2_PLACEMENT_3D ( 'NONE', #79093, #41792, #4547 ) ; +#22523 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469300, 14.05000000000000600, -28.20555803802992800 ) ) ; +#22524 = CARTESIAN_POINT ( 'NONE', ( -17.22115791441228400, 9.935236322205879500, -28.30315276798563700 ) ) ; +#22525 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 71.65075715145280800, -28.20555803802997700 ) ) ; +#22526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22527 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 2.333333333333339300, -10.73183747965883100 ) ) ; +#22528 = ORIENTED_EDGE ( 'NONE', *, *, #53456, .T. ) ; +#22529 = VERTEX_POINT ( 'NONE', #30886 ) ; +#22530 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844499200, 85.46616414991841300, -28.37247596307076200 ) ) ; +#22531 = ORIENTED_EDGE ( 'NONE', *, *, #2800, .F. ) ; +#22532 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 36.66666666666665700, 1.294441961969997200 ) ) ; +#22533 = AXIS2_PLACEMENT_3D ( 'NONE', #22408, #65939, #72195 ) ; +#22534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22536 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.68929190448937300, -28.20555803802997700 ) ) ; +#22535 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18281, #61812, #37019, #80560 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276997789000E-007, 0.0007677744771234537400 ), + .UNSPECIFIED. ) ; +#22537 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 1.666666666666677400, 2.794441961969992100 ) ) ; +#22538 = FACE_OUTER_BOUND ( 'NONE', #9427, .T. ) ; +#22539 = VERTEX_POINT ( 'NONE', #5864 ) ; +#22540 = CARTESIAN_POINT ( 'NONE', ( 9.904737509656014200, 17.92298334620663500, -28.20555803803009800 ) ) ; +#22541 = VERTEX_POINT ( 'NONE', #18367 ) ; +#22542 = CARTESIAN_POINT ( 'NONE', ( 8.075290353989833700, 44.45000000000000300, -5.981454989657847500 ) ) ; +#22544 = EDGE_CURVE ( 'NONE', #30212, #23867, #41994, .T. ) ; +#22543 = VERTEX_POINT ( 'NONE', #43098 ) ; +#22545 = CIRCLE ( 'NONE', #19286, 10.00000000000009200 ) ; +#22546 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 39.00000000000000000, -1.205558038030002800 ) ) ; +#22547 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78178, #59418, #3625, #47130 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389841069200E-007, 0.0008082646680357287800 ), + .UNSPECIFIED. ) ; +#22548 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 75.79999999999999700, -28.63843632546336000 ) ) ; +#22549 = ORIENTED_EDGE ( 'NONE', *, *, #23700, .F. ) ; +#22550 = AXIS2_PLACEMENT_3D ( 'NONE', #4737, #48230, #11018 ) ; +#22551 = EDGE_LOOP ( 'NONE', ( #23628, #3564, #41990, #79084 ) ) ; +#22552 = ORIENTED_EDGE ( 'NONE', *, *, #57872, .T. ) ; +#22553 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 80.90033558196108700, -28.70555803802997700 ) ) ; +#22554 = EDGE_LOOP ( 'NONE', ( #65741, #10920, #3384, #60590, #49774 ) ) ; +#22555 = EDGE_LOOP ( 'NONE', ( #45943, #68535, #45652 ) ) ; +#22556 = AXIS2_PLACEMENT_3D ( 'NONE', #80559, #6038, #37017 ) ; +#22557 = FACE_OUTER_BOUND ( 'NONE', #831, .T. ) ; +#22558 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528150900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#22559 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651168500, 51.99560977511637100, -28.70555803803014400 ) ) ; +#22560 = FACE_OUTER_BOUND ( 'NONE', #30394, .T. ) ; +#22561 = AXIS2_PLACEMENT_3D ( 'NONE', #61173, #42901, #5652 ) ; +#22562 = VERTEX_POINT ( 'NONE', #37100 ) ; +#22563 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22564 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 17.97246552159110100, -28.38801640354855800 ) ) ; +#22565 = ORIENTED_EDGE ( 'NONE', *, *, #9865, .T. ) ; +#22566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22567 = VERTEX_POINT ( 'NONE', #49593 ) ; +#22568 = ORIENTED_EDGE ( 'NONE', *, *, #41865, .F. ) ; +#22569 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846307800, 60.79999999999999700, -28.55171188418377100 ) ) ; +#22570 = VERTEX_POINT ( 'NONE', #80644 ) ; +#22571 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#22572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22573 = ADVANCED_FACE ( 'NONE', ( #73176 ), #71196, .T. ) ; +#22574 = FACE_OUTER_BOUND ( 'NONE', #16341, .T. ) ; +#22575 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 90.52242369685794200, -28.53861367218593200 ) ) ; +#22576 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 50.19949493661175700, -28.70555803802996700 ) ) ; +#22577 = ADVANCED_FACE ( 'NONE', ( #66381 ), #5010, .T. ) ; +#22578 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 52.18315603019263400, -28.70555803803024400 ) ) ; +#22579 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811644800, 20.39435118792235700, -28.41114655922299900 ) ) ; +#22580 = EDGE_CURVE ( 'NONE', #35281, #24508, #21581, .T. ) ; +#22581 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 42.50000000000001400, -7.061964498581022400 ) ) ; +#22582 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#22583 = LINE ( 'NONE', #27964, #76106 ) ; +#22584 = ORIENTED_EDGE ( 'NONE', *, *, #16610, .T. ) ; +#22585 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571438600, 71.52858243452105600, -28.70555803802997700 ) ) ; +#22586 = ORIENTED_EDGE ( 'NONE', *, *, #68095, .T. ) ; +#22587 = EDGE_CURVE ( 'NONE', #79395, #17606, #8883, .T. ) ; +#22588 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22590 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000009100, 51.96823913367169500, -28.70555803803030800 ) ) ; +#22591 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999799300, 52.97376207875046800, -28.70555803803030800 ) ) ; +#22592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22593 = CARTESIAN_POINT ( 'NONE', ( 0.9796893586462502900, 57.14999999999999900, 7.217929236370201500 ) ) ; +#22594 = EDGE_CURVE ( 'NONE', #69375, #4061, #38079, .T. ) ; +#22595 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 9.932503002402294000, -28.23966044827352200 ) ) ; +#22596 = ADVANCED_FACE ( 'NONE', ( #23523 ), #3040, .T. ) ; +#22597 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9870, #47097, #22385, #65920 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851657685200, 0.0005685240369912785800 ), + .UNSPECIFIED. ) ; +#22598 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22600 = EDGE_CURVE ( 'NONE', #48317, #57390, #19616, .T. ) ; +#22601 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006900, 56.50000000000001400, 4.650848422521014500 ) ) ; +#22602 = EDGE_CURVE ( 'NONE', #45282, #13063, #69252, .T. ) ; +#22603 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042477200, 42.59027028261003500, -28.70555803802996700 ) ) ; +#22604 = EDGE_LOOP ( 'NONE', ( #64720, #76047, #72125 ) ) ; +#22605 = CARTESIAN_POINT ( 'NONE', ( -10.03177803894783100, 90.28233213024647300, -28.25051428653848300 ) ) ; +#22606 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 90.16054007504463600, -28.34042301926880800 ) ) ; +#22607 = ORIENTED_EDGE ( 'NONE', *, *, #39344, .F. ) ; +#22608 = CARTESIAN_POINT ( 'NONE', ( -17.24306493325783400, 61.43482203710630800, -28.29548531138973600 ) ) ; +#22609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22610 = AXIS2_PLACEMENT_3D ( 'NONE', #43803, #18822, #56334 ) ; +#22611 = EDGE_CURVE ( 'NONE', #21940, #19202, #6954, .T. ) ; +#22612 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22613 = EDGE_CURVE ( 'NONE', #13589, #49449, #36168, .T. ) ; +#22614 = EDGE_CURVE ( 'NONE', #50523, #40430, #52684, .T. ) ; +#22615 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999924900, 28.13176086632792000, -28.70555803802994200 ) ) ; +#22616 = FACE_OUTER_BOUND ( 'NONE', #57876, .T. ) ; +#22617 = ORIENTED_EDGE ( 'NONE', *, *, #38478, .F. ) ; +#22618 = FACE_OUTER_BOUND ( 'NONE', #33139, .T. ) ; +#22619 = ORIENTED_EDGE ( 'NONE', *, *, #70977, .F. ) ; +#22620 = AXIS2_PLACEMENT_3D ( 'NONE', #29258, #35477, #66471 ) ; +#22621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22622 = CONICAL_SURFACE ( 'NONE', #27822, 10.50000000000009600, 0.7853981633974500600 ) ; +#22623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24289, #30561, #36773, #80309 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#22624 = ORIENTED_EDGE ( 'NONE', *, *, #50306, .T. ) ; +#22625 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 60.52242369685794200, -28.53861367218593900 ) ) ; +#22626 = ORIENTED_EDGE ( 'NONE', *, *, #65151, .F. ) ; +#22627 = AXIS2_PLACEMENT_3D ( 'NONE', #25862, #69339, #32096 ) ; +#22629 = VERTEX_POINT ( 'NONE', #56971 ) ; +#22628 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 11.00000000000001800, -6.205558038030003100 ) ) ; +#22630 = ORIENTED_EDGE ( 'NONE', *, *, #16053, .F. ) ; +#22631 = AXIS2_PLACEMENT_3D ( 'NONE', #46603, #71396, #40379 ) ; +#22632 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78948, #35426, #4389, #47883 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.955157123653727400E-007, 0.0002959323803893412300 ), + .UNSPECIFIED. ) ; +#22633 = AXIS2_PLACEMENT_3D ( 'NONE', #29357, #54039, #47494 ) ; +#22634 = FACE_OUTER_BOUND ( 'NONE', #68219, .T. ) ; +#22635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22636 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 51.16666666666665700, -9.205558038030003900 ) ) ; +#22637 = ORIENTED_EDGE ( 'NONE', *, *, #912, .F. ) ; +#22638 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454043900, 52.51973550835661800, -28.70555803802997400 ) ) ; +#22639 = FACE_OUTER_BOUND ( 'NONE', #10385, .T. ) ; +#22640 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22641 = ORIENTED_EDGE ( 'NONE', *, *, #67386, .F. ) ; +#22642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22643 = ORIENTED_EDGE ( 'NONE', *, *, #48696, .T. ) ; +#22644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44062, #566, #13123, #56606 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983720959801700E-007, 0.001076779618376920800 ), + .UNSPECIFIED. ) ; +#22645 = EDGE_LOOP ( 'NONE', ( #43484, #56557, #65152 ) ) ; +#22646 = ORIENTED_EDGE ( 'NONE', *, *, #39493, .T. ) ; +#22647 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#22648 = FACE_BOUND ( 'NONE', #42253, .T. ) ; +#22649 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914525200, 59.77559325427176200, -28.45987523529584700 ) ) ; +#22650 = ORIENTED_EDGE ( 'NONE', *, *, #62646, .F. ) ; +#22651 = CONICAL_SURFACE ( 'NONE', #53396, 10.50000000000009600, 0.7853981633974518300 ) ; +#22652 = AXIS2_PLACEMENT_3D ( 'NONE', #38871, #1634, #45113 ) ; +#22653 = ORIENTED_EDGE ( 'NONE', *, *, #76111, .F. ) ; +#22654 = EDGE_CURVE ( 'NONE', #36509, #19507, #71982, .T. ) ; +#22655 = ADVANCED_FACE ( 'NONE', ( #50722 ), #48765, .F. ) ; +#22656 = ORIENTED_EDGE ( 'NONE', *, *, #4478, .T. ) ; +#22657 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#22658 = VERTEX_POINT ( 'NONE', #57230 ) ; +#22659 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 69.94924284854654700, -28.20555803803014400 ) ) ; +#22660 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#22661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22662 = PLANE ( 'NONE', #54601 ) ; +#22663 = FACE_OUTER_BOUND ( 'NONE', #33918, .T. ) ; +#22664 = ORIENTED_EDGE ( 'NONE', *, *, #31412, .T. ) ; +#22665 = EDGE_CURVE ( 'NONE', #7904, #76021, #65389, .T. ) ; +#22666 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 71.43945992495532900, -28.34042301926880500 ) ) ; +#22667 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550015200, 59.83662311806121200, -28.37223523914948900 ) ) ; +#22668 = AXIS2_PLACEMENT_3D ( 'NONE', #50499, #13307, #56799 ) ; +#22669 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22671 = ADVANCED_FACE ( 'NONE', ( #54653 ), #79959, .F. ) ; +#22672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22673 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22674 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22676 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510346100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#22677 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#22678 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33810, #77325, #52547, #15320 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377689532809300E-007, 0.0007331055842532352600 ), + .UNSPECIFIED. ) ; +#22679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22682 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 30.93650294695131500, -28.30782889147481600 ) ) ; +#22683 = AXIS2_PLACEMENT_3D ( 'NONE', #33266, #45733, #70519 ) ; +#22684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22685 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#22686 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#22687 = ORIENTED_EDGE ( 'NONE', *, *, #20415, .F. ) ; +#22688 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#22689 = EDGE_LOOP ( 'NONE', ( #17785, #43554, #15053, #78829 ) ) ; +#22690 = CARTESIAN_POINT ( 'NONE', ( 1.705837858217820000, 35.05000000000000400, -28.37136602294609100 ) ) ; +#22691 = CARTESIAN_POINT ( 'NONE', ( 15.16958695401593200, 33.69875723892621300, -28.70555803803001600 ) ) ; +#22692 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#22693 = AXIS2_PLACEMENT_3D ( 'NONE', #1605, #45084, #7855 ) ; +#22694 = CARTESIAN_POINT ( 'NONE', ( -3.778746597914902900, 18.16476742015635900, -28.30311934730015000 ) ) ; +#22695 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22696 = ADVANCED_FACE ( 'NONE', ( #17680 ), #46816, .T. ) ; +#22697 = CONICAL_SURFACE ( 'NONE', #54286, 10.00000000000009400, 0.7853981633974447300 ) ; +#22698 = ORIENTED_EDGE ( 'NONE', *, *, #53565, .T. ) ; +#22699 = CONICAL_SURFACE ( 'NONE', #37262, 10.00000000000009200, 0.7853981633974447300 ) ; +#22701 = EDGE_CURVE ( 'NONE', #4729, #15774, #63417, .T. ) ; +#22700 = EDGE_LOOP ( 'NONE', ( #17086, #5318, #51296, #32009 ) ) ; +#22702 = ORIENTED_EDGE ( 'NONE', *, *, #17053, .T. ) ; +#22703 = CIRCLE ( 'NONE', #49080, 10.50000000000009600 ) ; +#22704 = EDGE_LOOP ( 'NONE', ( #1560, #39882, #26605, #39635 ) ) ; +#22705 = VERTEX_POINT ( 'NONE', #57494 ) ; +#22706 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 57.16666666666667900, -3.349151577478988200 ) ) ; +#22707 = FACE_OUTER_BOUND ( 'NONE', #70208, .T. ) ; +#22708 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174749000, 51.43945992495533700, -28.34042301926881200 ) ) ; +#22709 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 9.746602415621548900, -28.20555803803025800 ) ) ; +#22710 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 87.46443389862716300, -28.54207364681943200 ) ) ; +#22711 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .T. ) ; +#22712 = EDGE_CURVE ( 'NONE', #41168, #9068, #57488, .T. ) ; +#22713 = FACE_OUTER_BOUND ( 'NONE', #53832, .T. ) ; +#22714 = EDGE_CURVE ( 'NONE', #4680, #44027, #34213, .T. ) ; +#22715 = ORIENTED_EDGE ( 'NONE', *, *, #75031, .F. ) ; +#22716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22717 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275502600, 51.33333333333335000, 2.794441961969998300 ) ) ; +#22718 = VERTEX_POINT ( 'NONE', #20509 ) ; +#22719 = ORIENTED_EDGE ( 'NONE', *, *, #46359, .T. ) ; +#22720 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3356, #77905, #34384, #46858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.602085213965210600E-018, 0.001984222747275631000 ), + .UNSPECIFIED. ) ; +#22721 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195356100, 28.18365405593805300, -28.35038903107269400 ) ) ; +#22722 = ORIENTED_EDGE ( 'NONE', *, *, #9779, .T. ) ; +#22723 = CIRCLE ( 'NONE', #6448, 10.50000000000009600 ) ; +#22724 = AXIS2_PLACEMENT_3D ( 'NONE', #10699, #54191, #16956 ) ; +#22725 = EDGE_CURVE ( 'NONE', #76799, #6941, #43021, .T. ) ; +#22726 = EDGE_CURVE ( 'NONE', #23125, #36928, #67307, .T. ) ; +#22727 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743485300, 12.16464174796073800, -28.53896444442198900 ) ) ; +#22728 = EDGE_CURVE ( 'NONE', #80632, #79978, #28630, .T. ) ; +#22729 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 17.19543746431604000, -28.61277292027076100 ) ) ; +#22730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22731 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 28.50000000000001100, 6.847000845227646500 ) ) ; +#22732 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 51.43250300240195800, -28.20555803803030800 ) ) ; +#22733 = ORIENTED_EDGE ( 'NONE', *, *, #24326, .F. ) ; +#22734 = EDGE_CURVE ( 'NONE', #42577, #35431, #14116, .T. ) ; +#22735 = AXIS2_PLACEMENT_3D ( 'NONE', #40159, #9130, #33916 ) ; +#22736 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844501000, 65.46616414991841300, -28.37247596307076200 ) ) ; +#22737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22738 = ORIENTED_EDGE ( 'NONE', *, *, #28593, .T. ) ; +#22739 = CONICAL_SURFACE ( 'NONE', #22154, 10.00000000000009200, 0.7853981633974447300 ) ; +#22740 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22741 = CARTESIAN_POINT ( 'NONE', ( -17.23693278408309500, 29.28642716943459900, -28.45216716783122400 ) ) ; +#22742 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.23796787468682400, -28.38801640354855100 ) ) ; +#22743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22744 = AXIS2_PLACEMENT_3D ( 'NONE', #17289, #60833, #23548 ) ; +#22745 = AXIS2_PLACEMENT_3D ( 'NONE', #58616, #21370, #64907 ) ; +#22746 = ADVANCED_FACE ( 'NONE', ( #30342 ), #44847, .T. ) ; +#22747 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 51.46283204837339300, -28.48697406221667400 ) ) ; +#22748 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#22749 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 62.99999999999999300, -6.205558038030003100 ) ) ; +#22750 = CIRCLE ( 'NONE', #39338, 10.00000000000009400 ) ; +#22751 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22752 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116458300, 39.20564881207762700, -28.41114655922299200 ) ) ; +#22753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22754 = ORIENTED_EDGE ( 'NONE', *, *, #37674, .T. ) ; +#22755 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22756 = ADVANCED_FACE ( 'NONE', ( #32254 ), #70802, .T. ) ; +#22757 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#22758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22759 = EDGE_CURVE ( 'NONE', #70678, #39193, #80441, .T. ) ; +#22760 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22761 = VERTEX_POINT ( 'NONE', #33544 ) ; +#22762 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22763 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466620100, 18.83106028708544600, -28.57333386111662700 ) ) ; +#22764 = EDGE_LOOP ( 'NONE', ( #74693, #79898, #76711, #53886 ) ) ; +#22765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75229, #19201, #44164, #6951 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387969121800E-007, 0.0007987676590764748500 ), + .UNSPECIFIED. ) ; +#22766 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#22767 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22768 = CONICAL_SURFACE ( 'NONE', #58937, 10.50000000000009600, 0.7853981633974500600 ) ; +#22769 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 37.62623792124939100, -28.70555803802995200 ) ) ; +#22770 = ORIENTED_EDGE ( 'NONE', *, *, #36046, .T. ) ; +#22771 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22772 = FACE_OUTER_BOUND ( 'NONE', #59977, .T. ) ; +#22773 = EDGE_LOOP ( 'NONE', ( #53568, #72749, #48495, #53680, #27257 ) ) ; +#22774 = CARTESIAN_POINT ( 'NONE', ( -10.22115791441228400, 9.935236322205881300, -28.30315276798563700 ) ) ; +#22775 = ADVANCED_FACE ( 'NONE', ( #13785 ), #76032, .F. ) ; +#22777 = EDGE_CURVE ( 'NONE', #76021, #5765, #65985, .T. ) ; +#22776 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55935, #31219, #49927, #12724 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.477419510104565600E-005, 0.0003518478340460129400 ), + .UNSPECIFIED. ) ; +#22778 = CONICAL_SURFACE ( 'NONE', #55294, 10.00000000000009200, 0.7853981633974447300 ) ; +#22779 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#22780 = AXIS2_PLACEMENT_3D ( 'NONE', #73735, #36447, #79984 ) ; +#22782 = ORIENTED_EDGE ( 'NONE', *, *, #48430, .T. ) ; +#22781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22783 = ORIENTED_EDGE ( 'NONE', *, *, #67378, .T. ) ; +#22784 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35184, #72432, #4136, #47620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001735021124194179800 ), + .UNSPECIFIED. ) ; +#22785 = ORIENTED_EDGE ( 'NONE', *, *, #51602, .F. ) ; +#22786 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#22787 = CARTESIAN_POINT ( 'NONE', ( -8.314034490221683200, 45.54999999999998300, -28.37321477197630800 ) ) ; +#22788 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614898300, 10.10677350908850500, -28.30799595738890100 ) ) ; +#22789 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22790 = ADVANCED_FACE ( 'NONE', ( #77996 ), #42933, .F. ) ; +#22791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27696, #46395, #65245, #27981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007675026475730911600 ), + .UNSPECIFIED. ) ; +#22792 = CIRCLE ( 'NONE', #44018, 9.500000000000099500 ) ; +#22793 = ORIENTED_EDGE ( 'NONE', *, *, #75895, .T. ) ; +#22794 = AXIS2_PLACEMENT_3D ( 'NONE', #5605, #11869, #36595 ) ; +#22795 = CONICAL_SURFACE ( 'NONE', #25848, 10.50000000000009600, 0.7853981633974518300 ) ; +#22796 = ORIENTED_EDGE ( 'NONE', *, *, #56596, .F. ) ; +#22797 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22798 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 0.1666666666666696000, 9.794441961969994300 ) ) ; +#22799 = ORIENTED_EDGE ( 'NONE', *, *, #74654, .T. ) ; +#22800 = ORIENTED_EDGE ( 'NONE', *, *, #60991, .T. ) ; +#22801 = CARTESIAN_POINT ( 'NONE', ( 11.74534273518457700, 31.00380841767820800, -28.64142799534456400 ) ) ; +#22802 = VERTEX_POINT ( 'NONE', #15326 ) ; +#22803 = CIRCLE ( 'NONE', #36132, 9.500000000000097700 ) ; +#22804 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 34.50000000000000700, -4.865812075874393000 ) ) ; +#22805 = AXIS2_PLACEMENT_3D ( 'NONE', #12927, #56419, #19170 ) ; +#22806 = ORIENTED_EDGE ( 'NONE', *, *, #34135, .T. ) ; +#22807 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609044400, 60.13716795162677200, -28.48697406221666700 ) ) ; +#22808 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22809 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, -0.4999999999999728000, -7.061964498581016200 ) ) ; +#22810 = EDGE_LOOP ( 'NONE', ( #50041, #24101, #52011 ) ) ; +#22811 = ORIENTED_EDGE ( 'NONE', *, *, #8957, .T. ) ; +#22812 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#22813 = EDGE_CURVE ( 'NONE', #6780, #3570, #51461, .T. ) ; +#22814 = VERTEX_POINT ( 'NONE', #9033 ) ; +#22815 = ORIENTED_EDGE ( 'NONE', *, *, #73964, .T. ) ; +#22816 = CARTESIAN_POINT ( 'NONE', ( 1.181486531379787300, 44.45000000000000300, -10.64272451562669800 ) ) ; +#22817 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22818 = CONICAL_SURFACE ( 'NONE', #14291, 10.50000000000009600, 0.7853981633974500600 ) ; +#22819 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 36.83333333333335000, 1.741883078712340300 ) ) ; +#22820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67936, #80182, #74213, #36912 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287100512100E-007, 0.0007057040544504633800 ), + .UNSPECIFIED. ) ; +#22821 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310472500, 30.99769010897086800, -28.61774594594331600 ) ) ; +#22822 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541607300, 30.51125751638927900, -28.53740755999535500 ) ) ; +#22823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57841, #14329, #20589, #64130 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629357050883600E-007, 0.0003902800319294281300 ), + .UNSPECIFIED. ) ; +#22824 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.03751622186550200, -28.32723995587591400 ) ) ; +#22825 = CARTESIAN_POINT ( 'NONE', ( 17.10696782501636200, 92.65348391250817900, -28.48107268352801200 ) ) ; +#22826 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.41070809551055000, -28.20555803802994200 ) ) ; +#22827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22828 = EDGE_CURVE ( 'NONE', #77318, #44984, #11823, .T. ) ; +#22829 = CONICAL_SURFACE ( 'NONE', #61161, 10.50000000000009600, 0.7853981633974500600 ) ; +#22830 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#22831 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22832 = EDGE_CURVE ( 'NONE', #57525, #49126, #1094, .T. ) ; +#22834 = ORIENTED_EDGE ( 'NONE', *, *, #27620, .T. ) ; +#22833 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#22835 = EDGE_CURVE ( 'NONE', #16582, #42640, #59512, .T. ) ; +#22836 = CARTESIAN_POINT ( 'NONE', ( -2.254657264815452600, 31.00380841767820400, -28.64142799534455000 ) ) ; +#22837 = VERTEX_POINT ( 'NONE', #28138 ) ; +#22838 = ADVANCED_FACE ( 'NONE', ( #15717 ), #41002, .T. ) ; +#22839 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#22840 = EDGE_CURVE ( 'NONE', #45068, #60491, #37031, .T. ) ; +#22841 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#22842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22843 = CONICAL_SURFACE ( 'NONE', #76097, 10.00000000000009600, 0.7853981633974482800 ) ; +#22844 = AXIS2_PLACEMENT_3D ( 'NONE', #37547, #305, #43801 ) ; +#22845 = FACE_OUTER_BOUND ( 'NONE', #27650, .T. ) ; +#22846 = ORIENTED_EDGE ( 'NONE', *, *, #65764, .T. ) ; +#22847 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 40.33333333333334300, 2.794441961969998300 ) ) ; +#22848 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500235600, 89.83662311806180900, -28.37223523914888900 ) ) ; +#22849 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571446600, 20.52858243452105900, -28.70555803802995200 ) ) ; +#22850 = ORIENTED_EDGE ( 'NONE', *, *, #74786, .F. ) ; +#22851 = CIRCLE ( 'NONE', #76625, 10.50000000000009900 ) ; +#22852 = CIRCLE ( 'NONE', #24174, 10.00000000000009200 ) ; +#22853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22854 = ORIENTED_EDGE ( 'NONE', *, *, #52730, .T. ) ; +#22855 = ORIENTED_EDGE ( 'NONE', *, *, #72127, .T. ) ; +#22856 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922514900, 80.09037803491439400, -28.29483400905923000 ) ) ; +#22857 = ADVANCED_FACE ( 'NONE', ( #74113 ), #7883, .T. ) ; +#22858 = CARTESIAN_POINT ( 'NONE', ( 12.21669353480403300, 70.79999999999967000, -28.32841359973473400 ) ) ; +#22859 = AXIS2_PLACEMENT_3D ( 'NONE', #63520, #26270, #69744 ) ; +#22860 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#22861 = CARTESIAN_POINT ( 'NONE', ( -4.961578163538235700, 57.14999999999998400, 6.473958392664686200 ) ) ; +#22862 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#22863 = EDGE_CURVE ( 'NONE', #77712, #9664, #22597, .T. ) ; +#22864 = EDGE_CURVE ( 'NONE', #55084, #14525, #8097, .T. ) ; +#22865 = CIRCLE ( 'NONE', #32042, 10.50000000000009600 ) ; +#22866 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#22867 = ORIENTED_EDGE ( 'NONE', *, *, #67031, .T. ) ; +#22868 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346273500, 60.20590598242372900, -28.39369363572352300 ) ) ; +#22869 = CIRCLE ( 'NONE', #42964, 9.500000000000097700 ) ; +#22870 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#22871 = ORIENTED_EDGE ( 'NONE', *, *, #43637, .F. ) ; +#22872 = ADVANCED_FACE ( 'NONE', ( #24464 ), #55579, .F. ) ; +#22873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7265, #13571, #32317, #75817 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695386940833800E-007, 0.0007987676590763795500 ), + .UNSPECIFIED. ) ; +#22874 = ORIENTED_EDGE ( 'NONE', *, *, #59059, .F. ) ; +#22875 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#22876 = ORIENTED_EDGE ( 'NONE', *, *, #65027, .F. ) ; +#22877 = CARTESIAN_POINT ( 'NONE', ( -20.07175818051946300, 7.464157827316889800, -27.32434979573919500 ) ) ; +#22878 = ORIENTED_EDGE ( 'NONE', *, *, #12012, .F. ) ; +#22879 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#22881 = ADVANCED_FACE ( 'NONE', ( #61477 ), #22515, .F. ) ; +#22880 = ORIENTED_EDGE ( 'NONE', *, *, #58727, .F. ) ; +#22882 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973500, 86.44146991525219900, -28.52629299565632700 ) ) ; +#22883 = EDGE_CURVE ( 'NONE', #63837, #25886, #74457, .T. ) ; +#22884 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#22885 = CIRCLE ( 'NONE', #32426, 10.00000000000009200 ) ; +#22886 = ORIENTED_EDGE ( 'NONE', *, *, #10847, .F. ) ; +#22887 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528358700, 9.968680884981202100, -28.51286550264501000 ) ) ; +#22888 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22889 = ADVANCED_FACE ( 'NONE', ( #39016 ), #70169, .F. ) ; +#22890 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2526, #33563, #52290, #15071 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108271600, 0.0006040461757766777300 ), + .UNSPECIFIED. ) ; +#22891 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .T. ) ; +#22892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22893 = ORIENTED_EDGE ( 'NONE', *, *, #46154, .F. ) ; +#22894 = CIRCLE ( 'NONE', #60656, 10.00000000000009200 ) ; +#22895 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428562700, 18.07141756547875700, -28.70555803803009500 ) ) ; +#22896 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 8.833333333333348100, 3.794441961969996900 ) ) ; +#22897 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26930, #20659, #33164, #76663 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999459161700E-007, 0.0006654947828621483500 ), + .UNSPECIFIED. ) ; +#22898 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#22899 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 90.13716795162659400, -28.48697406221657500 ) ) ; +#22900 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 49.00000000000000700, 6.794441961969995200 ) ) ; +#22901 = AXIS2_PLACEMENT_3D ( 'NONE', #51357, #14162, #57658 ) ; +#22902 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#22903 = CIRCLE ( 'NONE', #57445, 9.500000000000099500 ) ; +#22904 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22905 = CARTESIAN_POINT ( 'NONE', ( -17.03178561562176100, 71.31767869357338400, -28.25052235028429900 ) ) ; +#22906 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181928500, 59.94924284854760500, -28.20555803803014400 ) ) ; +#22907 = EDGE_LOOP ( 'NONE', ( #42054, #79032, #50429 ) ) ; +#22908 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280410500, 36.94142842854297000, -28.37229765499281700 ) ) ; +#22909 = ORIENTED_EDGE ( 'NONE', *, *, #50564, .F. ) ; +#22910 = CONICAL_SURFACE ( 'NONE', #8219, 10.50000000000009800, 0.7853981633974518300 ) ; +#22911 = AXIS2_PLACEMENT_3D ( 'NONE', #15347, #52575, #77356 ) ; +#22912 = VERTEX_POINT ( 'NONE', #35189 ) ; +#22913 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13148, #50068, #37849, #56620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794049486000E-007, 0.0009376791149930029300 ), + .UNSPECIFIED. ) ; +#22914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22915 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851495600, 23.59761904761906600, -28.70555803802994200 ) ) ; +#22916 = EDGE_CURVE ( 'NONE', #1060, #32608, #9859, .T. ) ; +#22917 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609176300, 44.91466791010177700, -28.53910738522653300 ) ) ; +#22918 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658371100, 51.44848545218980700, -28.67627428870429500 ) ) ; +#22919 = CIRCLE ( 'NONE', #12499, 10.00000000000009600 ) ; +#22920 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 90.29722425778766100, -28.32715733700501900 ) ) ; +#22921 = CONICAL_SURFACE ( 'NONE', #26247, 10.50000000000009400, 0.7853981633974500600 ) ; +#22922 = AXIS2_PLACEMENT_3D ( 'NONE', #3265, #46771, #9533 ) ; +#22923 = EDGE_LOOP ( 'NONE', ( #25399, #62323, #17242 ) ) ; +#22924 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22925 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223653800, 61.76592160028389600, -28.37510699173804700 ) ) ; +#22926 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22927 = CONICAL_SURFACE ( 'NONE', #52057, 10.50000000000009200, 0.7853981633974482800 ) ; +#22928 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830875300, 41.64954451135936600, -28.33400579219036800 ) ) ; +#22929 = ORIENTED_EDGE ( 'NONE', *, *, #77510, .T. ) ; +#22930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#22932 = ORIENTED_EDGE ( 'NONE', *, *, #9883, .T. ) ; +#22931 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22934 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655685100, 38.92298334620757300, -28.20555803802996000 ) ) ; +#22935 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385600, 60.16349705304866500, -28.30782889147482400 ) ) ; +#22936 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22937 = CONICAL_SURFACE ( 'NONE', #32158, 10.00000000000009200, 0.7853981633974415100 ) ; +#22938 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 31.17701665379220800, -28.20555803802996000 ) ) ; +#22939 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714288300, 26.42318720225497900, -28.70555803802994200 ) ) ; +#22940 = FACE_OUTER_BOUND ( 'NONE', #7129, .T. ) ; +#22941 = CARTESIAN_POINT ( 'NONE', ( -11.74546181355821500, 49.59617548195244300, -28.64146967277534000 ) ) ; +#22942 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 70.79999999999950000, -28.70555803803047500 ) ) ; +#22943 = ORIENTED_EDGE ( 'NONE', *, *, #43363, .F. ) ; +#22944 = EDGE_CURVE ( 'NONE', #7275, #47960, #5967, .T. ) ; +#22945 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654481100, 90.27440177985811000, -28.29986836858026700 ) ) ; +#22946 = ORIENTED_EDGE ( 'NONE', *, *, #24260, .F. ) ; +#22947 = ORIENTED_EDGE ( 'NONE', *, *, #78490, .F. ) ; +#22948 = EDGE_CURVE ( 'NONE', #65360, #55309, #60001, .T. ) ; +#22949 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492445000, 39.70543520232829600, -28.70555803802995200 ) ) ; +#22950 = VERTEX_POINT ( 'NONE', #10415 ) ; +#22951 = CARTESIAN_POINT ( 'NONE', ( -4.502075021551483800, 90.99854748491394200, -28.70555803802997700 ) ) ; +#22952 = ORIENTED_EDGE ( 'NONE', *, *, #6501, .F. ) ; +#22953 = CARTESIAN_POINT ( 'NONE', ( -11.03590776526139400, 28.50212297965146000, -28.25344967589763800 ) ) ; +#22954 = CIRCLE ( 'NONE', #79719, 9.500000000000099500 ) ; +#22955 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#22956 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966100, 41.44069092601379400, -28.35186440610858600 ) ) ; +#22957 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387502000, 65.13282980700519400, -28.53914313452737900 ) ) ; +#22958 = ORIENTED_EDGE ( 'NONE', *, *, #19632, .F. ) ; +#22959 = ORIENTED_EDGE ( 'NONE', *, *, #45178, .F. ) ; +#22960 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543118000, 20.36477483291889000, -28.27573853395004000 ) ) ; +#22961 = EDGE_CURVE ( 'NONE', #52899, #14221, #28405, .T. ) ; +#22962 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#22963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71153, #27667, #40139, #2872 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0006589639548296663300 ), + .UNSPECIFIED. ) ; +#22964 = EDGE_CURVE ( 'NONE', #72596, #44641, #26432, .T. ) ; +#22965 = ORIENTED_EDGE ( 'NONE', *, *, #80655, .T. ) ; +#22966 = CONICAL_SURFACE ( 'NONE', #27414, 10.50000000000009600, 0.7853981633974518300 ) ; +#22967 = AXIS2_PLACEMENT_3D ( 'NONE', #77661, #3121, #46616 ) ; +#22968 = EDGE_LOOP ( 'NONE', ( #9073, #46966, #10639, #7640, #51931, #76964 ) ) ; +#22969 = ORIENTED_EDGE ( 'NONE', *, *, #24005, .F. ) ; +#22970 = CONICAL_SURFACE ( 'NONE', #15245, 10.50000000000009600, 0.7853981633974500600 ) ; +#22971 = ADVANCED_FACE ( 'NONE', ( #53638 ), #51644, .F. ) ; +#22972 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 55.00000000000000700, -1.205558038030005300 ) ) ; +#22973 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343277900, 49.85339758437807900, -28.20555803802996700 ) ) ; +#22974 = AXIS2_PLACEMENT_3D ( 'NONE', #73335, #61106, #48535 ) ; +#22975 = EDGE_CURVE ( 'NONE', #34172, #26983, #45465, .T. ) ; +#22976 = EDGE_CURVE ( 'NONE', #60902, #52833, #31083, .T. ) ; +#22977 = EDGE_CURVE ( 'NONE', #50519, #5611, #16609, .T. ) ; +#22978 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22979 = ADVANCED_FACE ( 'NONE', ( #37071 ), #42458, .T. ) ; +#22981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24774, #18519, #55758, #31037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067880300 ), + .UNSPECIFIED. ) ; +#22980 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#22982 = AXIS2_PLACEMENT_3D ( 'NONE', #68690, #31445, #25172 ) ; +#22983 = CONICAL_SURFACE ( 'NONE', #49539, 10.50000000000009600, 0.7853981633974518300 ) ; +#22984 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230950700, 39.78860447109613600, -28.53900456328626900 ) ) ; +#22985 = CIRCLE ( 'NONE', #59815, 10.00000000000009200 ) ; +#22986 = ORIENTED_EDGE ( 'NONE', *, *, #65766, .T. ) ; +#22987 = EDGE_CURVE ( 'NONE', #75321, #75712, #2116, .T. ) ; +#22988 = VERTEX_POINT ( 'NONE', #11498 ) ; +#22989 = CONICAL_SURFACE ( 'NONE', #68662, 10.50000000000009600, 0.7853981633974500600 ) ; +#22990 = AXIS2_PLACEMENT_3D ( 'NONE', #39405, #45628, #8374 ) ; +#22991 = AXIS2_PLACEMENT_3D ( 'NONE', #35875, #79407, #42102 ) ; +#22992 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61194, #17675, #73697, #36400 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610467100, 0.0004765929656973988600 ), + .UNSPECIFIED. ) ; +#22993 = ORIENTED_EDGE ( 'NONE', *, *, #65512, .T. ) ; +#22994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#22996 = ADVANCED_FACE ( 'NONE', ( #20559 ), #2029, .F. ) ; +#22997 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22998 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.43250300240198000, -28.20555803803047800 ) ) ; +#22999 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467678100, 19.76893971292313200, -28.57333386111099900 ) ) ; +#23000 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 26.33333333333335300, -6.705558038030005700 ) ) ; +#23001 = PLANE ( 'NONE', #27078 ) ; +#23002 = FACE_OUTER_BOUND ( 'NONE', #68538, .T. ) ; +#23003 = CARTESIAN_POINT ( 'NONE', ( -3.976832725519280600, 18.08088969930761500, -28.30223898143233200 ) ) ; +#23004 = CIRCLE ( 'NONE', #10024, 10.50000000000006400 ) ; +#23005 = CARTESIAN_POINT ( 'NONE', ( 5.100117264795680500, 24.54999999999999700, -28.53808257741932800 ) ) ; +#23006 = ORIENTED_EDGE ( 'NONE', *, *, #69772, .F. ) ; +#23007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68038, #55520, #74312, #37012 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823692541441200E-007, 0.0008724363063894271600 ), + .UNSPECIFIED. ) ; +#23008 = ORIENTED_EDGE ( 'NONE', *, *, #47955, .F. ) ; +#23009 = CARTESIAN_POINT ( 'NONE', ( 16.63895135775480600, 40.45782482474363900, -28.57035285187586000 ) ) ; +#23010 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459558800, 59.08026449164336900, -28.70555803802997700 ) ) ; +#23011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#23012 = ORIENTED_EDGE ( 'NONE', *, *, #68085, .F. ) ; +#23013 = AXIS2_PLACEMENT_3D ( 'NONE', #50506, #13311, #56807 ) ; +#23014 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194995600, 56.76150692817510200, -28.68631150211658100 ) ) ; +#23015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56773, #31773, #734, #19530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183121000, 0.005168056621191933700 ), + .UNSPECIFIED. ) ; +#23016 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086483900, 30.62812581275678500, -28.37194250757536200 ) ) ; +#23017 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743334800, 47.43535825203925100, -28.53896444442200000 ) ) ; +#23018 = CIRCLE ( 'NONE', #20487, 10.00000000000009200 ) ; +#23019 = AXIS2_PLACEMENT_3D ( 'NONE', #23726, #67232, #30004 ) ; +#23020 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195777000, 11.09027028261045100, -28.70555803803030400 ) ) ; +#23021 = ORIENTED_EDGE ( 'NONE', *, *, #60278, .T. ) ; +#23022 = CARTESIAN_POINT ( 'NONE', ( -2.277608394786786200, 50.55000000000005400, -28.70555803802997400 ) ) ; +#23023 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 60.83333333333335000, 3.794441961969996900 ) ) ; +#23024 = VERTEX_POINT ( 'NONE', #80020 ) ; +#23025 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 5.000000000000534700, -19.32050998661224400 ) ) ; +#23026 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462829400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#23027 = ORIENTED_EDGE ( 'NONE', *, *, #31087, .T. ) ; +#23028 = ORIENTED_EDGE ( 'NONE', *, *, #29896, .T. ) ; +#23029 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#23030 = ORIENTED_EDGE ( 'NONE', *, *, #76566, .F. ) ; +#23031 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 71.25732391202376400, -28.20555803803014400 ) ) ; +#23032 = CARTESIAN_POINT ( 'NONE', ( 3.535187653983306700, 9.406791769321852600, -28.68794773163824300 ) ) ; +#23033 = CIRCLE ( 'NONE', #52625, 7.500000000000000000 ) ; +#23034 = CONICAL_SURFACE ( 'NONE', #24884, 10.00000000000009600, 0.7853981633974447300 ) ; +#23035 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818070600, 61.65075715145340500, -28.20555803803031100 ) ) ; +#23036 = AXIS2_PLACEMENT_3D ( 'NONE', #54279, #72800, #66810 ) ; +#23038 = EDGE_LOOP ( 'NONE', ( #33631, #18888, #28390, #39697 ) ) ; +#23037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23040 = ORIENTED_EDGE ( 'NONE', *, *, #80340, .T. ) ; +#23041 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23043 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23044 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274333400, 63.66464174796072900, -28.53896444442201000 ) ) ; +#23045 = CONICAL_SURFACE ( 'NONE', #2825, 10.00000000000009600, 0.7853981633974447300 ) ; +#23046 = CARTESIAN_POINT ( 'NONE', ( 11.51272810170965100, 61.47860083896959100, -28.56001287362867200 ) ) ; +#23047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23048 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#23049 = AXIS2_PLACEMENT_3D ( 'NONE', #34381, #77899, #40624 ) ; +#23050 = CARTESIAN_POINT ( 'NONE', ( -16.33257079600103300, 35.62986017865679100, -28.62099087449130900 ) ) ; +#23051 = ORIENTED_EDGE ( 'NONE', *, *, #52098, .T. ) ; +#23052 = CONICAL_SURFACE ( 'NONE', #44855, 10.00000000000009600, 0.7853981633974447300 ) ; +#23053 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#23054 = CARTESIAN_POINT ( 'NONE', ( 10.24297557446559300, 60.16517473503391500, -28.29551658696701800 ) ) ; +#23055 = FACE_OUTER_BOUND ( 'NONE', #31165, .T. ) ; +#23056 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 17.98922577050341700, -28.37255355648629200 ) ) ; +#23057 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.43250300240229600, -28.20555803802995200 ) ) ; +#23058 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999617200, 83.89610994602607300, -28.37519436813213500 ) ) ; +#23059 = CARTESIAN_POINT ( 'NONE', ( -15.78330646519587600, 60.79999999999998300, -28.32841359973438600 ) ) ; +#23060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23062 = ORIENTED_EDGE ( 'NONE', *, *, #51384, .F. ) ; +#23063 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26868, #58126, #14619, #20879 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001984222747273558000 ), + .UNSPECIFIED. ) ; +#23064 = ADVANCED_FACE ( 'NONE', ( #68236 ), #49695, .T. ) ; +#23065 = EDGE_CURVE ( 'NONE', #24911, #44504, #68460, .T. ) ; +#23066 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 12.87738371066728300, -28.70555803802994200 ) ) ; +#23067 = CIRCLE ( 'NONE', #37517, 9.500000000000101300 ) ; +#23069 = ORIENTED_EDGE ( 'NONE', *, *, #59173, .T. ) ; +#23068 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23070 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 67.16666666666665700, -12.20555803803000000 ) ) ; +#23071 = EDGE_CURVE ( 'NONE', #59492, #73841, #66304, .T. ) ; +#23072 = CIRCLE ( 'NONE', #67064, 10.00000000000009400 ) ; +#23073 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23074 = ORIENTED_EDGE ( 'NONE', *, *, #40345, .T. ) ; +#23075 = ORIENTED_EDGE ( 'NONE', *, *, #58102, .F. ) ; +#23076 = ADVANCED_FACE ( 'NONE', ( #72164 ), #80282, .T. ) ; +#23077 = FACE_OUTER_BOUND ( 'NONE', #19194, .T. ) ; +#23078 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 32.33333333333333600, 3.124568980892187500 ) ) ; +#23079 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 81.78933626866496800, -28.53923937255172300 ) ) ; +#23080 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614804200, 20.60677350908857300, -28.30799595738880500 ) ) ; +#23081 = EDGE_CURVE ( 'NONE', #69303, #53776, #57546, .T. ) ; +#23082 = ORIENTED_EDGE ( 'NONE', *, *, #13794, .F. ) ; +#23083 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, -2.666666666666664300, 5.722645192245503900 ) ) ; +#23084 = EDGE_CURVE ( 'NONE', #75712, #66290, #53977, .T. ) ; +#23085 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23086 = CIRCLE ( 'NONE', #909, 10.50000000000009400 ) ; +#23087 = CIRCLE ( 'NONE', #47984, 10.00000000000009600 ) ; +#23088 = VERTEX_POINT ( 'NONE', #18536 ) ; +#23089 = EDGE_CURVE ( 'NONE', #57450, #16279, #35180, .T. ) ; +#23090 = CARTESIAN_POINT ( 'NONE', ( -7.239658545744593900, 44.44999999999998900, -7.157311916181090100 ) ) ; +#23091 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23092 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 34.66666666666667100, -6.705558038030000400 ) ) ; +#23093 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#23094 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 70.90033558196107300, -28.70555803802997700 ) ) ; +#23095 = ORIENTED_EDGE ( 'NONE', *, *, #28193, .F. ) ; +#23096 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79410, #66904, #11144, #54646 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696348939600E-007, 0.0008724363063897111100 ), + .UNSPECIFIED. ) ; +#23097 = AXIS2_PLACEMENT_3D ( 'NONE', #10259, #22499, #47462 ) ; +#23098 = EDGE_CURVE ( 'NONE', #60567, #14568, #18602, .T. ) ; +#23099 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034431400, 49.42298334620755200, -28.20555803802997400 ) ) ; +#23100 = EDGE_CURVE ( 'NONE', #69726, #19509, #3995, .T. ) ; +#23101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23102 = EDGE_CURVE ( 'NONE', #5295, #7051, #16653, .T. ) ; +#23103 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#23104 = ADVANCED_FACE ( 'NONE', ( #33188 ), #62386, .F. ) ; +#23105 = CARTESIAN_POINT ( 'NONE', ( -1.881289711469444100E-013, 73.89610994602600200, -28.37519436813194000 ) ) ; +#23106 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23107 = CARTESIAN_POINT ( 'NONE', ( 24.49459900838965600, 5.252700688913783700, -21.84521716755604000 ) ) ; +#23108 = FACE_OUTER_BOUND ( 'NONE', #40886, .T. ) ; +#23109 = VERTEX_POINT ( 'NONE', #12835 ) ; +#23110 = AXIS2_PLACEMENT_3D ( 'NONE', #25798, #69282, #32036 ) ; +#23111 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#23112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23113 = VERTEX_POINT ( 'NONE', #56314 ) ; +#23114 = EDGE_LOOP ( 'NONE', ( #63361, #60192, #37314, #45499 ) ) ; +#23115 = VERTEX_POINT ( 'NONE', #19061 ) ; +#23116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23117 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80297, #12036, #30809, #74330 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577297500 ), + .UNSPECIFIED. ) ; +#23118 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548966500, 41.44069092601378700, -28.35186440610859300 ) ) ; +#23119 = VERTEX_POINT ( 'NONE', #62592 ) ; +#23120 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#23121 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#23122 = CIRCLE ( 'NONE', #28157, 10.50000000000009600 ) ; +#23123 = AXIS2_PLACEMENT_3D ( 'NONE', #17271, #60802, #23526 ) ; +#23124 = AXIS2_PLACEMENT_3D ( 'NONE', #62546, #25290, #68791 ) ; +#23125 = VERTEX_POINT ( 'NONE', #25342 ) ; +#23126 = EDGE_LOOP ( 'NONE', ( #47007, #15658, #43292 ) ) ; +#23127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23128 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 41.96823913367205700, -28.70555803802997700 ) ) ; +#23129 = CARTESIAN_POINT ( 'NONE', ( 15.16937532304037900, 36.40149171177412800, -28.70555803803001600 ) ) ; +#23130 = FACE_OUTER_BOUND ( 'NONE', #10460, .T. ) ; +#23131 = VERTEX_POINT ( 'NONE', #68845 ) ; +#23132 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 38.16666666666665000, -3.349151577478988200 ) ) ; +#23133 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23134 = CARTESIAN_POINT ( 'NONE', ( -9.487410011450741400, 60.12140959735997100, -28.55996453402221400 ) ) ; +#23135 = VERTEX_POINT ( 'NONE', #31593 ) ; +#23136 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 81.25732391202362200, -28.20555803803030800 ) ) ; +#23137 = CIRCLE ( 'NONE', #67842, 10.00000000000009400 ) ; +#23138 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100947700, 20.97636006919873000, -28.38670679782145400 ) ) ; +#23139 = AXIS2_PLACEMENT_3D ( 'NONE', #73908, #36610, #80140 ) ; +#23140 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528172200, 49.63131911501876200, -28.51286550264510200 ) ) ; +#23141 = CARTESIAN_POINT ( 'NONE', ( -9.212108747980250800, 57.15000000000002000, 0.8104360807848413100 ) ) ; +#23142 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#23143 = ORIENTED_EDGE ( 'NONE', *, *, #78355, .F. ) ; +#23144 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78976, #35463, #16953, #60478 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104960645400, 0.0007670610367941945200 ), + .UNSPECIFIED. ) ; +#23145 = CONICAL_SURFACE ( 'NONE', #54697, 10.50000000000009800, 0.7853981633974518300 ) ; +#23146 = ORIENTED_EDGE ( 'NONE', *, *, #41939, .T. ) ; +#23147 = EDGE_CURVE ( 'NONE', #54838, #40018, #45797, .T. ) ; +#23148 = CARTESIAN_POINT ( 'NONE', ( -22.67516239544080400, 6.162443142206301500, -25.11648256846162400 ) ) ; +#23149 = AXIS2_PLACEMENT_3D ( 'NONE', #28177, #40633, #3363 ) ; +#23150 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000044000, 30.40050506338820200, -28.70555803802996700 ) ) ; +#23151 = VERTEX_POINT ( 'NONE', #44044 ) ; +#23152 = CARTESIAN_POINT ( 'NONE', ( 7.714285714286139900, 15.92318720225502000, -28.70555803803025800 ) ) ; +#23153 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306343200, 41.59789380924876000, -28.25343951603343500 ) ) ; +#23154 = FACE_OUTER_BOUND ( 'NONE', #17404, .T. ) ; +#23155 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 17.63176086632794400, -28.70555803802992800 ) ) ; +#23156 = ORIENTED_EDGE ( 'NONE', *, *, #23813, .T. ) ; +#23157 = CARTESIAN_POINT ( 'NONE', ( 17.24582400329030900, 70.89404291337223200, -28.45010999295951500 ) ) ; +#23158 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58841, #65133, #3065, #46563 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191243073400E-007, 0.0006649560044140929700 ), + .UNSPECIFIED. ) ; +#23159 = ADVANCED_FACE ( 'NONE', ( #87 ), #12773, .F. ) ; +#23160 = AXIS2_PLACEMENT_3D ( 'NONE', #48359, #11138, #54641 ) ; +#23161 = CIRCLE ( 'NONE', #65647, 10.50000000000009600 ) ; +#23162 = ORIENTED_EDGE ( 'NONE', *, *, #62340, .T. ) ; +#23163 = CARTESIAN_POINT ( 'NONE', ( 12.53318012365774500, 55.79999999999925800, -28.37307693585103200 ) ) ; +#23164 = ORIENTED_EDGE ( 'NONE', *, *, #80372, .T. ) ; +#23165 = ADVANCED_FACE ( 'NONE', ( #31258 ), #60460, .F. ) ; +#23166 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 6.666666666666687400, -5.535685056952199400 ) ) ; +#23167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23169 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 46.83333333333335700, -9.205558038030003900 ) ) ; +#23170 = FACE_OUTER_BOUND ( 'NONE', #43046, .T. ) ; +#23171 = CIRCLE ( 'NONE', #33948, 9.500000000000099500 ) ; +#23172 = ORIENTED_EDGE ( 'NONE', *, *, #21077, .F. ) ; +#23173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23174 = ORIENTED_EDGE ( 'NONE', *, *, #23924, .T. ) ; +#23175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23176 = EDGE_CURVE ( 'NONE', #11162, #38210, #64376, .T. ) ; +#23177 = ORIENTED_EDGE ( 'NONE', *, *, #45430, .F. ) ; +#23178 = ADVANCED_FACE ( 'NONE', ( #76973 ), #10802, .F. ) ; +#23179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23180 = ORIENTED_EDGE ( 'NONE', *, *, #47953, .F. ) ; +#23181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79013, #29516, #35741, #79260 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190671804200E-007, 0.0006649560044141308100 ), + .UNSPECIFIED. ) ; +#23182 = ORIENTED_EDGE ( 'NONE', *, *, #35594, .T. ) ; +#23183 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103800, 59.94924284854708700, -28.20555803802997700 ) ) ; +#23184 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#23185 = VERTEX_POINT ( 'NONE', #32113 ) ; +#23186 = ADVANCED_FACE ( 'NONE', ( #27370 ), #47762, .T. ) ; +#23187 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#23188 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23189 = ORIENTED_EDGE ( 'NONE', *, *, #67264, .F. ) ; +#23190 = CARTESIAN_POINT ( 'NONE', ( 10.59931297827745700, 92.17541673345638700, -28.69290071860185900 ) ) ; +#23191 = FACE_OUTER_BOUND ( 'NONE', #74995, .T. ) ; +#23192 = ORIENTED_EDGE ( 'NONE', *, *, #12723, .T. ) ; +#23193 = EDGE_CURVE ( 'NONE', #12400, #27806, #29347, .T. ) ; +#23195 = EDGE_CURVE ( 'NONE', #8921, #24335, #78954, .T. ) ; +#23194 = ORIENTED_EDGE ( 'NONE', *, *, #40817, .F. ) ; +#23196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23198 = EDGE_LOOP ( 'NONE', ( #36331, #11461, #22878 ) ) ; +#23199 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#23200 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.23237991241950300, -28.26633708900882900 ) ) ; +#23201 = CONICAL_SURFACE ( 'NONE', #14105, 10.00000000000009400, 0.7853981633974447300 ) ; +#23202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23203 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#23204 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180756500, 79.94924284854684500, -28.20555803802997700 ) ) ; +#23205 = AXIS2_PLACEMENT_3D ( 'NONE', #76327, #39040, #1782 ) ; +#23206 = EDGE_LOOP ( 'NONE', ( #65520, #65464, #73566 ) ) ; +#23207 = EDGE_CURVE ( 'NONE', #4437, #74584, #14697, .T. ) ; +#23208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23209 = EDGE_CURVE ( 'NONE', #37342, #30375, #39516, .T. ) ; +#23210 = EDGE_CURVE ( 'NONE', #56129, #39630, #58482, .T. ) ; +#23211 = ORIENTED_EDGE ( 'NONE', *, *, #31329, .T. ) ; +#23212 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23213 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459416700, 62.51973550835649000, -28.70555803803014100 ) ) ; +#23214 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23215 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274319200, 73.66464174796033100, -28.53896444442227000 ) ) ; +#23216 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709897400, 28.56267502090533100, -28.41043597897453700 ) ) ; +#23217 = CONICAL_SURFACE ( 'NONE', #55174, 10.50000000000009600, 0.7853981633974500600 ) ; +#23218 = EDGE_LOOP ( 'NONE', ( #15912, #9781, #45507, #29386, #36408 ) ) ; +#23219 = CARTESIAN_POINT ( 'NONE', ( -3.756937565509201000, 71.43482212736796600, -28.29548618595819700 ) ) ; +#23220 = ORIENTED_EDGE ( 'NONE', *, *, #44579, .T. ) ; +#23221 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 69.81066373133501200, -28.53923937255171900 ) ) ; +#23222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23223 = AXIS2_PLACEMENT_3D ( 'NONE', #44825, #7584, #51085 ) ; +#23224 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455702200, 70.07527064970044300, -28.39317435246152900 ) ) ; +#23225 = AXIS2_PLACEMENT_3D ( 'NONE', #12157, #55649, #18399 ) ; +#23226 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515412300, 51.01872124563919900, -28.53757464917569600 ) ) ; +#23227 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23228 = AXIS2_PLACEMENT_3D ( 'NONE', #74267, #80499, #18210 ) ; +#23229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23231 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66532, #23016, #29314, #72792 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710729600, 0.0008082646680357292200 ), + .UNSPECIFIED. ) ; +#23232 = CIRCLE ( 'NONE', #43670, 10.50000000000009200 ) ; +#23233 = VERTEX_POINT ( 'NONE', #44552 ) ; +#23234 = ORIENTED_EDGE ( 'NONE', *, *, #40834, .T. ) ; +#23235 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 52.83333333333334300, 0.9380355014189731800 ) ) ; +#23236 = AXIS2_PLACEMENT_3D ( 'NONE', #28985, #72471, #35208 ) ; +#23237 = EDGE_CURVE ( 'NONE', #25854, #23256, #43845, .T. ) ; +#23238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23239 = ADVANCED_FACE ( 'NONE', ( #41923 ), #26429, .T. ) ; +#23240 = CIRCLE ( 'NONE', #47220, 10.00000000000009200 ) ; +#23241 = VERTEX_POINT ( 'NONE', #7879 ) ; +#23242 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507573900, 28.07379779496243400, -28.70555803802994200 ) ) ; +#23243 = FACE_OUTER_BOUND ( 'NONE', #51370, .T. ) ; +#23244 = EDGE_LOOP ( 'NONE', ( #9076, #51588, #33063 ) ) ; +#23245 = EDGE_LOOP ( 'NONE', ( #42123, #35874, #744, #54444 ) ) ; +#23246 = ORIENTED_EDGE ( 'NONE', *, *, #60993, .T. ) ; +#23247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23248 = EDGE_CURVE ( 'NONE', #10633, #68768, #25082, .T. ) ; +#23249 = CIRCLE ( 'NONE', #70493, 10.00000000000009600 ) ; +#23250 = EDGE_LOOP ( 'NONE', ( #37324, #8822, #69599 ) ) ; +#23251 = AXIS2_PLACEMENT_3D ( 'NONE', #78652, #41359, #4093 ) ; +#23252 = ORIENTED_EDGE ( 'NONE', *, *, #67298, .F. ) ; +#23253 = EDGE_LOOP ( 'NONE', ( #69089, #40632, #22473, #31524 ) ) ; +#23254 = EDGE_LOOP ( 'NONE', ( #66811, #21861, #21809, #45913, #48718 ) ) ; +#23255 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#23256 = VERTEX_POINT ( 'NONE', #1627 ) ; +#23257 = ADVANCED_FACE ( 'NONE', ( #73095 ), #71122, .T. ) ; +#23258 = EDGE_LOOP ( 'NONE', ( #60961, #76000, #41888, #31169 ) ) ; +#23259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23260 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819206200, 59.94924284854685900, -28.20555803802997700 ) ) ; +#23261 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#23262 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 24.16666666666667100, 1.741883078712356500 ) ) ; +#23263 = CONICAL_SURFACE ( 'NONE', #67284, 10.00000000000009200, 0.7853981633974447300 ) ; +#23264 = AXIS2_PLACEMENT_3D ( 'NONE', #13376, #56863, #19611 ) ; +#23265 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 51.82440674572815500, -28.45987523529581900 ) ) ; +#23266 = CARTESIAN_POINT ( 'NONE', ( 5.294162141782186900, 24.54999999999999700, -28.37136602294608400 ) ) ; +#23267 = ORIENTED_EDGE ( 'NONE', *, *, #38534, .F. ) ; +#23268 = EDGE_LOOP ( 'NONE', ( #28632, #71182, #49429 ) ) ; +#23269 = ADVANCED_FACE ( 'NONE', ( #25410 ), #28078, .T. ) ; +#23270 = EDGE_LOOP ( 'NONE', ( #12639, #113, #27931, #47031 ) ) ; +#23271 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58866, #52593, #71114, #21633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694917099700E-007, 0.0008724363063896142900 ), + .UNSPECIFIED. ) ; +#23272 = CARTESIAN_POINT ( 'NONE', ( 3.371418216713648200, 80.16749699759752400, -28.25056166218035600 ) ) ; +#23273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23274 = CIRCLE ( 'NONE', #2037, 10.00000000000009200 ) ; +#23275 = AXIS2_PLACEMENT_3D ( 'NONE', #45920, #8666, #52173 ) ; +#23276 = VERTEX_POINT ( 'NONE', #21800 ) ; +#23277 = VERTEX_POINT ( 'NONE', #40538 ) ; +#23278 = ADVANCED_FACE ( 'NONE', ( #54579 ), #21512, .T. ) ; +#23279 = CARTESIAN_POINT ( 'NONE', ( -20.78576414612823000, 101.5404175208391800, -19.81829101932639100 ) ) ; +#23280 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#23281 = EDGE_CURVE ( 'NONE', #29561, #16691, #10627, .T. ) ; +#23282 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 58.66666666666667900, -5.535685056952199400 ) ) ; +#23283 = CIRCLE ( 'NONE', #8203, 10.00000000000009200 ) ; +#23284 = CARTESIAN_POINT ( 'NONE', ( 19.41519222706118300, 1.169615545877854300, -23.43868275677219900 ) ) ; +#23285 = ORIENTED_EDGE ( 'NONE', *, *, #14272, .F. ) ; +#23286 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23287 = VERTEX_POINT ( 'NONE', #34580 ) ; +#23288 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#23289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23291 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033100, 61.46283204837305200, -28.48697406221690900 ) ) ; +#23292 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 60.79999999999999000, -28.45034744217088700 ) ) ; +#23293 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23295 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#23296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23297 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.16749699759768800, -28.20555803802997700 ) ) ; +#23298 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929801000, 65.79999999999971300, -28.70555803803047500 ) ) ; +#23299 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23300 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000002700, 44.37738371066728900, -28.70555803802997700 ) ) ; +#23301 = EDGE_CURVE ( 'NONE', #2695, #68754, #39981, .T. ) ; +#23302 = CIRCLE ( 'NONE', #74931, 10.00000000000009400 ) ; +#23303 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819428200, 61.65075715145307100, -28.20555803803005900 ) ) ; +#23304 = CIRCLE ( 'NONE', #13488, 10.50000000000009600 ) ; +#23305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23306 = ORIENTED_EDGE ( 'NONE', *, *, #54027, .F. ) ; +#23307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23308 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032800, 20.44069092601377900, -28.35186440610856800 ) ) ; +#23309 = AXIS2_PLACEMENT_3D ( 'NONE', #8182, #51686, #14472 ) ; +#23310 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23311 = EDGE_LOOP ( 'NONE', ( #34528, #26083, #77736 ) ) ; +#23312 = EDGE_CURVE ( 'NONE', #57143, #56550, #38011, .T. ) ; +#23313 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205876900, 20.51754275546395300, -28.27504145778804200 ) ) ; +#23314 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280154400, 60.69966441803944000, -28.70555803803047500 ) ) ; +#23315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23316 = FACE_OUTER_BOUND ( 'NONE', #15379, .T. ) ; +#23318 = ORIENTED_EDGE ( 'NONE', *, *, #69970, .F. ) ; +#23317 = EDGE_CURVE ( 'NONE', #3197, #6076, #76928, .T. ) ; +#23319 = CIRCLE ( 'NONE', #28159, 9.500000000000129700 ) ; +#23320 = VERTEX_POINT ( 'NONE', #5694 ) ; +#23321 = AXIS2_PLACEMENT_3D ( 'NONE', #59767, #53214, #16248 ) ; +#23322 = EDGE_LOOP ( 'NONE', ( #1610, #14764, #29473, #55382 ) ) ; +#23323 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#23324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23325 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 65.00000000000000000, 9.794441961969996100 ) ) ; +#23326 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13485, #56988, #19719, #63258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674230820664100E-007, 0.0007606607323826519500 ), + .UNSPECIFIED. ) ; +#23327 = FACE_OUTER_BOUND ( 'NONE', #70785, .T. ) ; +#23328 = ORIENTED_EDGE ( 'NONE', *, *, #61091, .F. ) ; +#23329 = ORIENTED_EDGE ( 'NONE', *, *, #20726, .T. ) ; +#23330 = ORIENTED_EDGE ( 'NONE', *, *, #50932, .F. ) ; +#23331 = EDGE_LOOP ( 'NONE', ( #37894, #35917, #40577 ) ) ; +#23333 = VERTEX_POINT ( 'NONE', #9531 ) ; +#23332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23334 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11260, #36005, #61039, #23769 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215304702700E-007, 0.0007606633682817594400 ), + .UNSPECIFIED. ) ; +#23335 = ORIENTED_EDGE ( 'NONE', *, *, #47077, .T. ) ; +#23336 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 30.16666666666668200, -6.205558038030004800 ) ) ; +#23337 = AXIS2_PLACEMENT_3D ( 'NONE', #26332, #69808, #32551 ) ; +#23338 = ORIENTED_EDGE ( 'NONE', *, *, #34144, .F. ) ; +#23339 = AXIS2_PLACEMENT_3D ( 'NONE', #47843, #35397, #78640 ) ; +#23340 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 81.61077422949657000, -28.37255355648634100 ) ) ; +#23341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23342 = EDGE_CURVE ( 'NONE', #28056, #42103, #62474, .T. ) ; +#23343 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#23344 = EDGE_CURVE ( 'NONE', #39176, #30876, #6885, .T. ) ; +#23345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23346 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42716, #74038, #12007, #55515 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674235425879000E-007, 0.0007606607323824799900 ), + .UNSPECIFIED. ) ; +#23347 = AXIS2_PLACEMENT_3D ( 'NONE', #63027, #32010, #19501 ) ; +#23348 = VERTEX_POINT ( 'NONE', #55452 ) ; +#23349 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880589800, 46.17103694117756200, -28.53160243214819000 ) ) ; +#23350 = FACE_OUTER_BOUND ( 'NONE', #948, .T. ) ; +#23351 = ORIENTED_EDGE ( 'NONE', *, *, #1730, .T. ) ; +#23352 = CARTESIAN_POINT ( 'NONE', ( -9.042355969676748400, 44.44999999999999600, -0.7652346825559520600 ) ) ; +#23353 = VERTEX_POINT ( 'NONE', #11967 ) ; +#23354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23355 = VERTEX_POINT ( 'NONE', #49444 ) ; +#23356 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 32.50000000000000700, 6.847000845227641200 ) ) ; +#23357 = CARTESIAN_POINT ( 'NONE', ( 2.438065798940501700, 28.61613388835919700, -28.57723500840076600 ) ) ; +#23358 = ORIENTED_EDGE ( 'NONE', *, *, #45806, .F. ) ; +#23359 = CYLINDRICAL_SURFACE ( 'NONE', #36345, 10.00000000000000000 ) ; +#23360 = EDGE_CURVE ( 'NONE', #24749, #16236, #47970, .T. ) ; +#23361 = AXIS2_PLACEMENT_3D ( 'NONE', #64882, #27607, #71101 ) ; +#23362 = VERTEX_POINT ( 'NONE', #5973 ) ; +#23363 = AXIS2_PLACEMENT_3D ( 'NONE', #29370, #23341, #10829 ) ; +#23364 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7506, #32547, #51262, #14065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276782350400E-007, 0.0007677744771234670800 ), + .UNSPECIFIED. ) ; +#23365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23366 = CARTESIAN_POINT ( 'NONE', ( -9.572261083207317600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#23367 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489641100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#23369 = ORIENTED_EDGE ( 'NONE', *, *, #36227, .F. ) ; +#23368 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528131800, 30.96868088498121800, -28.51286550264512000 ) ) ; +#23370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23372 = CARTESIAN_POINT ( 'NONE', ( 22.10734989284548700, 6.446701992888828900, -25.76373555028467900 ) ) ; +#23373 = CONICAL_SURFACE ( 'NONE', #360, 10.50000000000009600, 0.7853981633974518300 ) ; +#23374 = ORIENTED_EDGE ( 'NONE', *, *, #56394, .T. ) ; +#23375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23376 = ORIENTED_EDGE ( 'NONE', *, *, #53502, .F. ) ; +#23377 = CARTESIAN_POINT ( 'NONE', ( 19.57213947772290700, 100.7446667395109200, -22.78924967150087300 ) ) ; +#23378 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 81.25732391202375000, -28.20555803803014400 ) ) ; +#23379 = ADVANCED_FACE ( 'NONE', ( #23439 ), #19543, .T. ) ; +#23380 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18497, #55741, #24751, #68263 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936606500, 0.0005776948474817064600 ), + .UNSPECIFIED. ) ; +#23382 = ADVANCED_FACE ( 'NONE', ( #8807 ), #80753, .T. ) ; +#23383 = PLANE ( 'NONE', #6091 ) ; +#23384 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23385 = AXIS2_PLACEMENT_3D ( 'NONE', #42555, #48794, #79849 ) ; +#23386 = CIRCLE ( 'NONE', #5232, 10.50000000000009600 ) ; +#23387 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 36.00000000000001400, -1.205558038030005300 ) ) ; +#23388 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23390 = EDGE_LOOP ( 'NONE', ( #32239, #60181, #15733, #12578, #70503 ) ) ; +#23391 = EDGE_LOOP ( 'NONE', ( #48287, #78868, #42507 ) ) ; +#23392 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.87705528805140200, -28.20555803802994200 ) ) ; +#23393 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#23394 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 57.60073525436789100, -28.70555803802999500 ) ) ; +#23395 = AXIS2_PLACEMENT_3D ( 'NONE', #69276, #63047, #25792 ) ; +#23396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23397 = CARTESIAN_POINT ( 'NONE', ( -7.857578349480038900, 57.15000000000002700, -6.563961268701817200 ) ) ; +#23398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23399 = EDGE_CURVE ( 'NONE', #51448, #14715, #33538, .T. ) ; +#23400 = CIRCLE ( 'NONE', #31553, 9.499999999999964500 ) ; +#23401 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23402 = ORIENTED_EDGE ( 'NONE', *, *, #16038, .F. ) ; +#23403 = EDGE_LOOP ( 'NONE', ( #4817, #74869, #79852 ) ) ; +#23404 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23405 = CIRCLE ( 'NONE', #7335, 10.00000000000009200 ) ; +#23406 = VERTEX_POINT ( 'NONE', #74778 ) ; +#23407 = ORIENTED_EDGE ( 'NONE', *, *, #78866, .F. ) ; +#23408 = CARTESIAN_POINT ( 'NONE', ( -24.45023787657984500, 5.274881252576384400, -21.97629334360843200 ) ) ; +#23409 = ORIENTED_EDGE ( 'NONE', *, *, #49138, .F. ) ; +#23410 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#23411 = ORIENTED_EDGE ( 'NONE', *, *, #35583, .F. ) ; +#23412 = EDGE_LOOP ( 'NONE', ( #77275, #54379, #37925 ) ) ; +#23413 = ORIENTED_EDGE ( 'NONE', *, *, #19822, .F. ) ; +#23414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23416 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524700, 90.16054007504463600, -28.34042301926880800 ) ) ; +#23417 = FACE_OUTER_BOUND ( 'NONE', #33625, .T. ) ; +#23419 = EDGE_CURVE ( 'NONE', #39327, #72160, #56523, .T. ) ; +#23418 = VERTEX_POINT ( 'NONE', #31267 ) ; +#23420 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662742917400, 15.93535825203927900, -28.53896444442194600 ) ) ; +#23421 = ORIENTED_EDGE ( 'NONE', *, *, #69075, .T. ) ; +#23422 = ORIENTED_EDGE ( 'NONE', *, *, #43209, .T. ) ; +#23423 = EDGE_CURVE ( 'NONE', #34642, #39960, #52602, .T. ) ; +#23424 = ORIENTED_EDGE ( 'NONE', *, *, #12251, .T. ) ; +#23425 = VERTEX_POINT ( 'NONE', #62267 ) ; +#23426 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#23427 = FACE_OUTER_BOUND ( 'NONE', #56247, .T. ) ; +#23428 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 4.500000000000002700, 2.454695999814385600 ) ) ; +#23429 = VERTEX_POINT ( 'NONE', #43471 ) ; +#23430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23431 = EDGE_CURVE ( 'NONE', #12975, #21775, #19080, .T. ) ; +#23432 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#23433 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 44.66666666666667100, 5.722645192245505700 ) ) ; +#23434 = ORIENTED_EDGE ( 'NONE', *, *, #17475, .F. ) ; +#23435 = EDGE_CURVE ( 'NONE', #70215, #44180, #36095, .T. ) ; +#23436 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60627, #17104, #73135, #35858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820721436100E-007, 0.0005869288236378058700 ), + .UNSPECIFIED. ) ; +#23437 = AXIS2_PLACEMENT_3D ( 'NONE', #17231, #60767, #23490 ) ; +#23438 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#23439 = FACE_OUTER_BOUND ( 'NONE', #73762, .T. ) ; +#23440 = ORIENTED_EDGE ( 'NONE', *, *, #23100, .F. ) ; +#23441 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23443 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 9.833333333333357000, -9.205558038030003900 ) ) ; +#23444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23445 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23446 = AXIS2_PLACEMENT_3D ( 'NONE', #8122, #51634, #14417 ) ; +#23447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7626, #44862, #57424, #20175 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866668103500E-007, 0.001052545149297069700 ), + .UNSPECIFIED. ) ; +#23448 = EDGE_CURVE ( 'NONE', #34969, #19874, #4627, .T. ) ; +#23449 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 21.02620220503754200, -28.70555803802994200 ) ) ; +#23450 = EDGE_CURVE ( 'NONE', #8272, #76162, #4931, .T. ) ; +#23451 = EDGE_CURVE ( 'NONE', #4551, #10633, #70936, .T. ) ; +#23452 = ADVANCED_FACE ( 'NONE', ( #2973 ), #65319, .F. ) ; +#23453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23455 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007438700, 42.28032162676583300, -28.55467576046958200 ) ) ; +#23454 = AXIS2_PLACEMENT_3D ( 'NONE', #21290, #8741, #64834 ) ; +#23456 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#23457 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#23458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23459 = AXIS2_PLACEMENT_3D ( 'NONE', #71649, #28434, #59404 ) ; +#23460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23461 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#23462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18215, #49446, #68245, #31004 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241220100, 0.0005195704752302474200 ), + .UNSPECIFIED. ) ; +#23464 = ORIENTED_EDGE ( 'NONE', *, *, #5920, .F. ) ; +#23465 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#23466 = PLANE ( 'NONE', #44783 ) ; +#23467 = ORIENTED_EDGE ( 'NONE', *, *, #51800, .T. ) ; +#23468 = AXIS2_PLACEMENT_3D ( 'NONE', #12330, #18835, #62361 ) ; +#23469 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23470 = ORIENTED_EDGE ( 'NONE', *, *, #19157, .F. ) ; +#23471 = CARTESIAN_POINT ( 'NONE', ( 10.95972934556083400, 39.22438272935920600, -28.30310183417008600 ) ) ; +#23472 = EDGE_CURVE ( 'NONE', #40799, #71041, #56467, .T. ) ; +#23473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23474 = ADVANCED_FACE ( 'NONE', ( #1019 ), #32181, .F. ) ; +#23475 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 90.16349705304865800, -28.30782889147482400 ) ) ; +#23476 = AXIS2_PLACEMENT_3D ( 'NONE', #55852, #18609, #49560 ) ; +#23477 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650650200, 31.01912043132467300, -28.30223257055580900 ) ) ; +#23478 = AXIS2_PLACEMENT_3D ( 'NONE', #1333, #44821, #7580 ) ; +#23480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8111, #63930, #32886, #51618 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131287614800 ), + .UNSPECIFIED. ) ; +#23479 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#23481 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615369000, 80.79999999999998300, -28.55171188418376400 ) ) ; +#23482 = FACE_OUTER_BOUND ( 'NONE', #1408, .T. ) ; +#23483 = ORIENTED_EDGE ( 'NONE', *, *, #73964, .F. ) ; +#23484 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#23485 = ORIENTED_EDGE ( 'NONE', *, *, #70490, .F. ) ; +#23486 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898061800, 9.718947331207335300, -28.33409528117008600 ) ) ; +#23487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23488 = ORIENTED_EDGE ( 'NONE', *, *, #54080, .F. ) ; +#23489 = FACE_OUTER_BOUND ( 'NONE', #67037, .T. ) ; +#23490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23491 = EDGE_LOOP ( 'NONE', ( #59608, #56404, #17073, #69150 ) ) ; +#23493 = ORIENTED_EDGE ( 'NONE', *, *, #11763, .F. ) ; +#23492 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 90.34267608797603100, -28.20555803802997700 ) ) ; +#23494 = VERTEX_POINT ( 'NONE', #26092 ) ; +#23495 = CARTESIAN_POINT ( 'NONE', ( 10.49999999998611400, 50.90050506339282100, -28.70555803803030800 ) ) ; +#23496 = ORIENTED_EDGE ( 'NONE', *, *, #79320, .T. ) ; +#23497 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23499 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23500 = FACE_OUTER_BOUND ( 'NONE', #43982, .T. ) ; +#23501 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23502 = ADVANCED_FACE ( 'NONE', ( #48688 ), #79883, .F. ) ; +#23503 = AXIS2_PLACEMENT_3D ( 'NONE', #8844, #71162, #33899 ) ; +#23504 = ORIENTED_EDGE ( 'NONE', *, *, #11527, .T. ) ; +#23505 = CIRCLE ( 'NONE', #42118, 10.00000000000009200 ) ; +#23506 = EDGE_LOOP ( 'NONE', ( #51534, #33013, #54240 ) ) ; +#23507 = VERTEX_POINT ( 'NONE', #7541 ) ; +#23508 = ORIENTED_EDGE ( 'NONE', *, *, #63456, .F. ) ; +#23509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23510 = ORIENTED_EDGE ( 'NONE', *, *, #7456, .F. ) ; +#23511 = EDGE_LOOP ( 'NONE', ( #29110, #53159, #34250 ) ) ; +#23512 = ORIENTED_EDGE ( 'NONE', *, *, #49236, .T. ) ; +#23513 = FACE_OUTER_BOUND ( 'NONE', #58332, .T. ) ; +#23514 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 50.66666666666667900, -5.205558038030003100 ) ) ; +#23515 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#23516 = AXIS2_PLACEMENT_3D ( 'NONE', #62150, #31154, #68393 ) ; +#23517 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23518 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12847, #31607, #68852, #75114 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572924100, 0.0008043487657982741600 ), + .UNSPECIFIED. ) ; +#23519 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23520 = EDGE_CURVE ( 'NONE', #8272, #38494, #42000, .T. ) ; +#23521 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .T. ) ; +#23522 = AXIS2_PLACEMENT_3D ( 'NONE', #69576, #32333, #75831 ) ; +#23523 = FACE_OUTER_BOUND ( 'NONE', #55508, .T. ) ; +#23525 = ORIENTED_EDGE ( 'NONE', *, *, #16033, .F. ) ; +#23524 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285728600, 22.67681279774500100, -28.70555803802995200 ) ) ; +#23526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23527 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#23528 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339055500, 81.46283204837337200, -28.48697406221665300 ) ) ; +#23529 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 22.00000000000001400, -1.205558038030002800 ) ) ; +#23530 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 33.15857157145691000, -28.20555803802996700 ) ) ; +#23531 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23532 = EDGE_CURVE ( 'NONE', #19665, #58395, #27577, .T. ) ; +#23533 = EDGE_CURVE ( 'NONE', #68175, #62197, #15642, .T. ) ; +#23534 = ORIENTED_EDGE ( 'NONE', *, *, #26794, .F. ) ; +#23535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23537 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489758300, 18.15930907398603000, -28.35186440610867500 ) ) ; +#23539 = ORIENTED_EDGE ( 'NONE', *, *, #43008, .T. ) ; +#23538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23540 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3726, #47488, #53782, #16527 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562423100, 0.001296017758337971000 ), + .UNSPECIFIED. ) ; +#23541 = EDGE_CURVE ( 'NONE', #45054, #62129, #50640, .T. ) ; +#23542 = ADVANCED_FACE ( 'NONE', ( #69161 ), #13712, .F. ) ; +#23543 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#23544 = EDGE_CURVE ( 'NONE', #47124, #43512, #13127, .T. ) ; +#23545 = FACE_OUTER_BOUND ( 'NONE', #55198, .T. ) ; +#23546 = ORIENTED_EDGE ( 'NONE', *, *, #53577, .F. ) ; +#23547 = AXIS2_PLACEMENT_3D ( 'NONE', #42333, #42068, #61148 ) ; +#23548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23549 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23550 = ORIENTED_EDGE ( 'NONE', *, *, #64071, .T. ) ; +#23551 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 56.50000000000002800, 2.454695999814385600 ) ) ; +#23552 = EDGE_CURVE ( 'NONE', #62856, #79303, #79430, .T. ) ; +#23553 = CARTESIAN_POINT ( 'NONE', ( 20.33617674473473300, 4.663823255265101300, -27.32428784736631800 ) ) ; +#23554 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471819800, 39.13131911501876200, -28.51286550264509100 ) ) ; +#23555 = FACE_OUTER_BOUND ( 'NONE', #24995, .T. ) ; +#23556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23557 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2637, #46147, #21454, #64988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025105234900, 0.0005411754951808989700 ), + .UNSPECIFIED. ) ; +#23558 = ORIENTED_EDGE ( 'NONE', *, *, #44691, .T. ) ; +#23559 = ORIENTED_EDGE ( 'NONE', *, *, #59138, .F. ) ; +#23560 = ORIENTED_EDGE ( 'NONE', *, *, #72244, .F. ) ; +#23561 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853330300, 31.29130857014966000, -28.37223374938521700 ) ) ; +#23562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23563 = ADVANCED_FACE ( 'NONE', ( #30261 ), #61406, .F. ) ; +#23564 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#23565 = ORIENTED_EDGE ( 'NONE', *, *, #25693, .T. ) ; +#23566 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#23567 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965570000, 49.42298334620756600, -28.20555803802996700 ) ) ; +#23568 = AXIS2_PLACEMENT_3D ( 'NONE', #40006, #15267, #71015 ) ; +#23569 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489640200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#23570 = CIRCLE ( 'NONE', #38443, 9.500000000000097700 ) ; +#23571 = EDGE_CURVE ( 'NONE', #31640, #29238, #77923, .T. ) ; +#23572 = CARTESIAN_POINT ( 'NONE', ( -17.38218670428380000, 41.70504786954612800, -28.41843566569993800 ) ) ; +#23573 = EDGE_CURVE ( 'NONE', #69715, #13896, #64994, .T. ) ; +#23574 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743274900, 43.66464174796073600, -28.53896444442200000 ) ) ; +#23575 = EDGE_CURVE ( 'NONE', #64739, #52508, #63347, .T. ) ; +#23576 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23577 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 60.34267608797603800, -28.20555803802997700 ) ) ; +#23578 = ORIENTED_EDGE ( 'NONE', *, *, #74907, .T. ) ; +#23579 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#23580 = ORIENTED_EDGE ( 'NONE', *, *, #59683, .T. ) ; +#23581 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23582 = CONICAL_SURFACE ( 'NONE', #77529, 10.50000000000009600, 0.7853981633974500600 ) ; +#23583 = AXIS2_PLACEMENT_3D ( 'NONE', #17325, #60860, #23597 ) ; +#23584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23585 = ORIENTED_EDGE ( 'NONE', *, *, #67717, .T. ) ; +#23586 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040255200, 33.15857157145700300, -28.37229765499278500 ) ) ; +#23587 = ADVANCED_FACE ( 'NONE', ( #17605 ), #75951, .F. ) ; +#23588 = VERTEX_POINT ( 'NONE', #64693 ) ; +#23589 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853719100, 61.25732391202397800, -28.20555803802997700 ) ) ; +#23590 = EDGE_LOOP ( 'NONE', ( #14657, #20662, #29969 ) ) ; +#23591 = ORIENTED_EDGE ( 'NONE', *, *, #5111, .T. ) ; +#23592 = ORIENTED_EDGE ( 'NONE', *, *, #10440, .F. ) ; +#23593 = FACE_OUTER_BOUND ( 'NONE', #16166, .T. ) ; +#23594 = ORIENTED_EDGE ( 'NONE', *, *, #55780, .T. ) ; +#23595 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23596 = EDGE_CURVE ( 'NONE', #28926, #25204, #11745, .T. ) ; +#23597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23598 = CONICAL_SURFACE ( 'NONE', #29495, 10.00000000000009600, 0.7853981633974482800 ) ; +#23599 = AXIS2_PLACEMENT_3D ( 'NONE', #33718, #52181, #27486 ) ; +#23600 = AXIS2_PLACEMENT_3D ( 'NONE', #46318, #9064, #52595 ) ; +#23601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23602 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#23603 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686900, 20.67701665379241400, -28.20555803802994200 ) ) ; +#23604 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035082700, 80.23507838941436900, -28.27580420063968000 ) ) ; +#23605 = ADVANCED_FACE ( 'NONE', ( #34136 ), #33660, .T. ) ; +#23606 = EDGE_LOOP ( 'NONE', ( #62280, #20388, #78862, #45336 ) ) ; +#23607 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#23608 = FACE_OUTER_BOUND ( 'NONE', #45592, .T. ) ; +#23609 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#23610 = ORIENTED_EDGE ( 'NONE', *, *, #9951, .F. ) ; +#23611 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 62.83333333333335000, -12.20555803803000600 ) ) ; +#23612 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 28.00000000000001400, 3.794441961969998300 ) ) ; +#23613 = AXIS2_PLACEMENT_3D ( 'NONE', #39446, #26972, #2173 ) ; +#23614 = CARTESIAN_POINT ( 'NONE', ( 3.371418216713659300, 70.16749699759751000, -28.25056166218036000 ) ) ; +#23615 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174630400, 70.16054007504466500, -28.34042301926885100 ) ) ; +#23616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37458, #74765, #43710, #6482 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635341553200E-007, 0.0008082706238602396600 ), + .UNSPECIFIED. ) ; +#23617 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#23618 = AXIS2_PLACEMENT_3D ( 'NONE', #39326, #2057, #45554 ) ; +#23619 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655600300, 28.42298334620759400, -28.20555803802994500 ) ) ; +#23620 = CARTESIAN_POINT ( 'NONE', ( -6.354899549382692700, 44.44999999999998900, 3.990106975709411000 ) ) ; +#23621 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#23622 = EDGE_CURVE ( 'NONE', #75159, #34405, #44767, .T. ) ; +#23623 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 30.33333333333335000, -10.73183747965883100 ) ) ; +#23624 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654375800, 81.52472935029865700, -28.39317435246151100 ) ) ; +#23625 = ORIENTED_EDGE ( 'NONE', *, *, #14351, .T. ) ; +#23626 = AXIS2_PLACEMENT_3D ( 'NONE', #72414, #35166, #78668 ) ; +#23627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23628 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ; +#23629 = AXIS2_PLACEMENT_3D ( 'NONE', #37476, #239, #43722 ) ; +#23630 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#23631 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 69.28967419478898600, -28.59353418718932400 ) ) ; +#23632 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23633 = EDGE_LOOP ( 'NONE', ( #72448, #33180, #57916 ) ) ; +#23634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23637 = CARTESIAN_POINT ( 'NONE', ( 19.84859067579552800, 7.575703938617450300, -27.46419189205653300 ) ) ; +#23638 = CONICAL_SURFACE ( 'NONE', #13705, 10.50000000000009600, 0.7853981633974500600 ) ; +#23639 = EDGE_LOOP ( 'NONE', ( #22715, #56398, #4752, #59084, #51310 ) ) ; +#23640 = CIRCLE ( 'NONE', #34202, 9.500000000000099500 ) ; +#23641 = AXIS2_PLACEMENT_3D ( 'NONE', #75202, #44140, #31697 ) ; +#23642 = VERTEX_POINT ( 'NONE', #21440 ) ; +#23643 = PLANE ( 'NONE', #29375 ) ; +#23644 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905800, 54.83849307182666200, -28.68631150211663400 ) ) ; +#23645 = ORIENTED_EDGE ( 'NONE', *, *, #6731, .F. ) ; +#23646 = CONICAL_SURFACE ( 'NONE', #51692, 10.00000000000009200, 0.7853981633974447300 ) ; +#23647 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54299, #10797, #60582, #23300 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549254487900E-007, 0.0008759529789574236300 ), + .UNSPECIFIED. ) ; +#23648 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23649 = EDGE_LOOP ( 'NONE', ( #30695, #23421, #1681, #23464, #67978, #78261, #38718 ) ) ; +#23650 = CARTESIAN_POINT ( 'NONE', ( 18.27382560252993600, 98.14814582951473200, -26.26872817535917200 ) ) ; +#23651 = ORIENTED_EDGE ( 'NONE', *, *, #78236, .T. ) ; +#23652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23653 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495070000, 49.19228657120675800, -28.53891855579986700 ) ) ; +#23654 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.79999999999951400, -28.20555803803047800 ) ) ; +#23655 = ORIENTED_EDGE ( 'NONE', *, *, #66494, .T. ) ; +#23656 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#23657 = CONICAL_SURFACE ( 'NONE', #73891, 10.00000000000009200, 0.7853981633974447300 ) ; +#23658 = ADVANCED_FACE ( 'NONE', ( #28329 ), #74032, .F. ) ; +#23659 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873280000, 59.89196326503821400, -28.29033182162382700 ) ) ; +#23660 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 29.03085164125335300, -28.45573375118225100 ) ) ; +#23661 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492443300, 18.70543520232829200, -28.70555803802992800 ) ) ; +#23662 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23663 = ORIENTED_EDGE ( 'NONE', *, *, #35047, .T. ) ; +#23664 = CONICAL_SURFACE ( 'NONE', #65534, 10.50000000000009600, 0.7853981633974500600 ) ; +#23665 = EDGE_CURVE ( 'NONE', #55231, #80133, #9790, .T. ) ; +#23666 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 33.83333333333334300, 0.9380355014189731800 ) ) ; +#23667 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .F. ) ; +#23668 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23669 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23671 = EDGE_CURVE ( 'NONE', #36904, #60061, #26356, .T. ) ; +#23670 = ORIENTED_EDGE ( 'NONE', *, *, #73190, .F. ) ; +#23672 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35806, #4778, #54566, #17305 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722046321100E-007, 0.001076779618376950100 ), + .UNSPECIFIED. ) ; +#23673 = ORIENTED_EDGE ( 'NONE', *, *, #3270, .F. ) ; +#23674 = TOROIDAL_SURFACE ( 'NONE', #26744, 2.499999999999999600, 5.000000000000000000 ) ; +#23675 = ORIENTED_EDGE ( 'NONE', *, *, #50350, .T. ) ; +#23676 = FACE_OUTER_BOUND ( 'NONE', #72272, .T. ) ; +#23677 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23678 = ADVANCED_FACE ( 'NONE', ( #59430 ), #77703, .T. ) ; +#23679 = CARTESIAN_POINT ( 'NONE', ( 17.31601142792128200, 9.623242896617718100, -28.43415153258099400 ) ) ; +#23680 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164800, 80.90033558196071800, -28.70555803803030800 ) ) ; +#23681 = EDGE_LOOP ( 'NONE', ( #47541, #30986, #66184, #61024 ) ) ; +#23682 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#23683 = CARTESIAN_POINT ( 'NONE', ( -1.921092698307347500, 57.15000000000001300, -10.42615614918728700 ) ) ; +#23684 = EDGE_CURVE ( 'NONE', #10634, #3723, #50444, .T. ) ; +#23685 = ORIENTED_EDGE ( 'NONE', *, *, #30792, .T. ) ; +#23686 = ORIENTED_EDGE ( 'NONE', *, *, #64553, .F. ) ; +#23687 = CARTESIAN_POINT ( 'NONE', ( -19.72592740998078400, 96.32592740998079300, -27.96478467863831700 ) ) ; +#23688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23689 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23690 = EDGE_CURVE ( 'NONE', #74451, #76141, #36035, .T. ) ; +#23691 = EDGE_CURVE ( 'NONE', #57688, #42951, #21592, .T. ) ; +#23692 = CIRCLE ( 'NONE', #62242, 9.500000000000099500 ) ; +#23693 = ORIENTED_EDGE ( 'NONE', *, *, #75254, .F. ) ; +#23694 = ADVANCED_FACE ( 'NONE', ( #46740 ), #34752, .T. ) ; +#23695 = CONICAL_SURFACE ( 'NONE', #49742, 10.00000000000009200, 0.7853981633974415100 ) ; +#23696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23697 = CARTESIAN_POINT ( 'NONE', ( -10.22125914545564000, 39.16476764525110400, -28.30311733712047200 ) ) ; +#23698 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23699 = AXIS2_PLACEMENT_3D ( 'NONE', #37725, #474, #43964 ) ; +#23700 = EDGE_CURVE ( 'NONE', #32622, #18771, #57465, .T. ) ; +#23701 = CARTESIAN_POINT ( 'NONE', ( 17.40887775794660500, 30.67956007225884100, -28.41154406527801500 ) ) ; +#23702 = EDGE_CURVE ( 'NONE', #33338, #38839, #42862, .T. ) ; +#23703 = EDGE_CURVE ( 'NONE', #48654, #72943, #67228, .T. ) ; +#23704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23705 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12677, #49874, #18900, #62435 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247643343300, 0.0009605145132141675500 ), + .UNSPECIFIED. ) ; +#23706 = ADVANCED_FACE ( 'NONE', ( #40923 ), #72290, .T. ) ; +#23707 = AXIS2_PLACEMENT_3D ( 'NONE', #32788, #76302, #39026 ) ; +#23708 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 65.92347538297963200, -28.70555803803014400 ) ) ; +#23709 = CARTESIAN_POINT ( 'NONE', ( -4.656953934541306200, 89.08026449163870100, -28.70555803802997700 ) ) ; +#23710 = ORIENTED_EDGE ( 'NONE', *, *, #189, .T. ) ; +#23711 = AXIS2_PLACEMENT_3D ( 'NONE', #13252, #37954, #50441 ) ; +#23712 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 2.333333333333339300, -3.705558038030004400 ) ) ; +#23713 = AXIS2_PLACEMENT_3D ( 'NONE', #65367, #71586, #21817 ) ; +#23714 = AXIS2_PLACEMENT_3D ( 'NONE', #60507, #23229, #66757 ) ; +#23715 = ORIENTED_EDGE ( 'NONE', *, *, #20116, .T. ) ; +#23716 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23717 = CARTESIAN_POINT ( 'NONE', ( -8.705837858217805100, 14.05000000000000200, -28.37136602294606600 ) ) ; +#23718 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 42.50000000000001400, -7.061964498581022400 ) ) ; +#23719 = FACE_OUTER_BOUND ( 'NONE', #46220, .T. ) ; +#23720 = EDGE_LOOP ( 'NONE', ( #908, #25819, #30242 ) ) ; +#23721 = CYLINDRICAL_SURFACE ( 'NONE', #30527, 10.00000000000000200 ) ; +#23722 = EDGE_LOOP ( 'NONE', ( #9133, #5683, #68370 ) ) ; +#23723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23724 = CONICAL_SURFACE ( 'NONE', #31380, 10.00000000000009200, 0.7853981633974415100 ) ; +#23725 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 7.666666666666682900, 5.722645192245505700 ) ) ; +#23726 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#23727 = ORIENTED_EDGE ( 'NONE', *, *, #38070, .F. ) ; +#23728 = ORIENTED_EDGE ( 'NONE', *, *, #77443, .T. ) ; +#23729 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#23730 = AXIS2_PLACEMENT_3D ( 'NONE', #62789, #25796, #56768 ) ; +#23731 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000023400, 17.41684396980682000, -28.70555803803042500 ) ) ; +#23732 = EDGE_CURVE ( 'NONE', #79210, #11257, #24387, .T. ) ; +#23733 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#23734 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123098400, 30.31139552890385100, -28.53900456328627700 ) ) ; +#23735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23736 = CIRCLE ( 'NONE', #32621, 9.500000000000099500 ) ; +#23737 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23738 = VERTEX_POINT ( 'NONE', #28798 ) ; +#23739 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999800, 80.90050506338822300, -28.70555803802997700 ) ) ; +#23740 = FACE_OUTER_BOUND ( 'NONE', #49308, .T. ) ; +#23741 = ORIENTED_EDGE ( 'NONE', *, *, #19592, .F. ) ; +#23742 = CARTESIAN_POINT ( 'NONE', ( 3.839550451718865000, 51.13768531620320300, -28.37082013777827400 ) ) ; +#23743 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#23744 = EDGE_CURVE ( 'NONE', #4338, #72475, #55507, .T. ) ; +#23745 = ORIENTED_EDGE ( 'NONE', *, *, #73488, .T. ) ; +#23746 = CARTESIAN_POINT ( 'NONE', ( -9.093266739737496000, 24.54999999999862600, -28.70555803802994200 ) ) ; +#23747 = AXIS2_PLACEMENT_3D ( 'NONE', #43371, #6127, #49605 ) ; +#23748 = ORIENTED_EDGE ( 'NONE', *, *, #17501, .F. ) ; +#23749 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78162, #34649, #10999, #54502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852029400, 0.0009376791149930265700 ), + .UNSPECIFIED. ) ; +#23750 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 55.79999999999999000, -28.20555803802997700 ) ) ; +#23751 = VERTEX_POINT ( 'NONE', #10521 ) ; +#23752 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 47.66545993132822200, -28.70555803802999200 ) ) ; +#23753 = FACE_OUTER_BOUND ( 'NONE', #31473, .T. ) ; +#23754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23755 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23756 = CARTESIAN_POINT ( 'NONE', ( 16.24682844054300900, 94.09365688108601900, -28.38965197393400100 ) ) ; +#23757 = ORIENTED_EDGE ( 'NONE', *, *, #42891, .T. ) ; +#23758 = VERTEX_POINT ( 'NONE', #16773 ) ; +#23759 = EDGE_LOOP ( 'NONE', ( #53494, #71641, #5772 ) ) ; +#23760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23761 = CARTESIAN_POINT ( 'NONE', ( -8.705837858217808600, 45.54999999999999700, -28.37136602294610600 ) ) ; +#23762 = AXIS2_PLACEMENT_3D ( 'NONE', #55077, #17839, #61382 ) ; +#23763 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284929600, 20.32033471810044000, -28.30868034705250100 ) ) ; +#23764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23765 = ORIENTED_EDGE ( 'NONE', *, *, #57025, .T. ) ; +#23766 = CIRCLE ( 'NONE', #11200, 10.50000000000009600 ) ; +#23767 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378045200, 90.82516071402460500, -28.57108397021912800 ) ) ; +#23768 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23769 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311236100, 75.80000000000261200, -28.70555803802997700 ) ) ; +#23770 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999803700, 72.97376207875046800, -28.70555803803030800 ) ) ; +#23771 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 11.92856308690589500, -28.36981695106777200 ) ) ; +#23772 = AXIS2_PLACEMENT_3D ( 'NONE', #2036, #45531, #8289 ) ; +#23773 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702742000, 69.37488905616159200, -28.55192314908416800 ) ) ; +#23774 = EDGE_CURVE ( 'NONE', #49795, #14661, #7095, .T. ) ; +#23775 = FACE_OUTER_BOUND ( 'NONE', #56336, .T. ) ; +#23776 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116467200, 28.70564881207762300, -28.41114655922298100 ) ) ; +#23777 = EDGE_LOOP ( 'NONE', ( #76690, #80762, #59041, #46875 ) ) ; +#23778 = ADVANCED_FACE ( 'NONE', ( #22432 ), #36997, .T. ) ; +#23779 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 48.49999999999998600, 4.650848422521012700 ) ) ; +#23780 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#23781 = ORIENTED_EDGE ( 'NONE', *, *, #67300, .F. ) ; +#23782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23783 = ORIENTED_EDGE ( 'NONE', *, *, #39489, .T. ) ; +#23784 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74282, #61770, #62030, #24753 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447103417000E-007, 0.0002745498510224783600 ), + .UNSPECIFIED. ) ; +#23785 = ADVANCED_FACE ( 'NONE', ( #70091 ), #3920, .T. ) ; +#23786 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#23787 = CIRCLE ( 'NONE', #4716, 10.50000000000009600 ) ; +#23788 = ORIENTED_EDGE ( 'NONE', *, *, #52608, .T. ) ; +#23789 = LINE ( 'NONE', #25069, #77307 ) ; +#23790 = EDGE_CURVE ( 'NONE', #17884, #21156, #20483, .T. ) ; +#23791 = ORIENTED_EDGE ( 'NONE', *, *, #41881, .T. ) ; +#23792 = EDGE_CURVE ( 'NONE', #28145, #80238, #73445, .T. ) ; +#23793 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16971, #35481, #23219, #66745 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917676045100E-007, 0.0004089036991175622500 ), + .UNSPECIFIED. ) ; +#23794 = EDGE_LOOP ( 'NONE', ( #13878, #23146, #75397, #74898 ) ) ; +#23795 = FACE_OUTER_BOUND ( 'NONE', #38169, .T. ) ; +#23796 = CIRCLE ( 'NONE', #43440, 10.00000000000009400 ) ; +#23797 = ORIENTED_EDGE ( 'NONE', *, *, #28824, .T. ) ; +#23798 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300882000, 83.19621076493093900, -28.61864990621736000 ) ) ; +#23799 = VERTEX_POINT ( 'NONE', #23569 ) ; +#23800 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46335, #2838, #15386, #58882 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964934100, 0.0005839769583134224800 ), + .UNSPECIFIED. ) ; +#23801 = ORIENTED_EDGE ( 'NONE', *, *, #20958, .T. ) ; +#23802 = AXIS2_PLACEMENT_3D ( 'NONE', #35109, #78621, #41322 ) ; +#23803 = EDGE_CURVE ( 'NONE', #75589, #44180, #58964, .T. ) ; +#23804 = EDGE_CURVE ( 'NONE', #36904, #73072, #7804, .T. ) ; +#23805 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655678500, 28.42298334620757000, -28.20555803802994500 ) ) ; +#23806 = PLANE ( 'NONE', #20460 ) ; +#23807 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23809 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 19.83333333333334300, -4.152999154772353500 ) ) ; +#23810 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25458, #62716, #44150, #6933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871346379700E-007, 0.0002930369617398842300 ), + .UNSPECIFIED. ) ; +#23811 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23812 = FACE_OUTER_BOUND ( 'NONE', #6209, .T. ) ; +#23813 = EDGE_CURVE ( 'NONE', #41971, #41336, #38937, .T. ) ; +#23814 = EDGE_LOOP ( 'NONE', ( #20653, #17175, #45957, #44903 ) ) ; +#23815 = AXIS2_PLACEMENT_3D ( 'NONE', #9315, #52838, #15596 ) ; +#23816 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#23817 = CONICAL_SURFACE ( 'NONE', #53939, 10.00000000000009400, 0.7853981633974447300 ) ; +#23818 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877851500, 18.57332680091207100, -28.37233769390152800 ) ) ; +#23819 = VERTEX_POINT ( 'NONE', #79596 ) ; +#23820 = EDGE_LOOP ( 'NONE', ( #62838, #5395, #64897 ) ) ; +#23821 = ORIENTED_EDGE ( 'NONE', *, *, #73812, .F. ) ; +#23822 = ORIENTED_EDGE ( 'NONE', *, *, #61608, .F. ) ; +#23823 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#23824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23825 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543400, 61.32559822014179200, -28.29986836858017800 ) ) ; +#23826 = EDGE_LOOP ( 'NONE', ( #72608, #41372, #6144 ) ) ; +#23827 = FACE_OUTER_BOUND ( 'NONE', #25702, .T. ) ; +#23828 = AXIS2_PLACEMENT_3D ( 'NONE', #12020, #55521, #18272 ) ; +#23829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23830 = AXIS2_PLACEMENT_3D ( 'NONE', #15086, #58603, #21362 ) ; +#23831 = ORIENTED_EDGE ( 'NONE', *, *, #67965, .T. ) ; +#23832 = EDGE_CURVE ( 'NONE', #42192, #23131, #44454, .T. ) ; +#23833 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23834 = ORIENTED_EDGE ( 'NONE', *, *, #21116, .T. ) ; +#23835 = ORIENTED_EDGE ( 'NONE', *, *, #78562, .T. ) ; +#23836 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#23837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23838 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 54.33333333333333600, -3.705558038030004400 ) ) ; +#23839 = VERTEX_POINT ( 'NONE', #11604 ) ; +#23840 = CARTESIAN_POINT ( 'NONE', ( 17.17236817127281500, 8.913815914363629700, -28.54394830537787100 ) ) ; +#23841 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 80.13716795162659400, -28.48697406221667400 ) ) ; +#23842 = ORIENTED_EDGE ( 'NONE', *, *, #60615, .F. ) ; +#23843 = FACE_OUTER_BOUND ( 'NONE', #37163, .T. ) ; +#23844 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432837500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#23845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4138, #41387, #78690, #47621 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807269000, 0.0005317208426584983800 ), + .UNSPECIFIED. ) ; +#23846 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609191400, 25.18533208989812900, -28.53910738522646900 ) ) ; +#23847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23849 = AXIS2_PLACEMENT_3D ( 'NONE', #55462, #74272, #61756 ) ; +#23850 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#23851 = EDGE_CURVE ( 'NONE', #38936, #24335, #72095, .T. ) ; +#23852 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846298500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#23853 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274707400, 35.05000000000000400, -28.20555803802995200 ) ) ; +#23854 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21596, #69988, #15325, #27856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207015074600E-007, 0.0008724366121407720800 ), + .UNSPECIFIED. ) ; +#23855 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949245800, 17.57379779496241700, -28.70555803802992800 ) ) ; +#23856 = CARTESIAN_POINT ( 'NONE', ( 2.133709875451472700E-013, 78.62623792124918500, -28.70555803802997700 ) ) ; +#23857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23859 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489654800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#23860 = CIRCLE ( 'NONE', #58514, 10.00000000000009600 ) ; +#23861 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23863 = AXIS2_PLACEMENT_3D ( 'NONE', #30663, #74189, #36871 ) ; +#23864 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 16.62623792124937700, -28.70555803802992800 ) ) ; +#23865 = EDGE_LOOP ( 'NONE', ( #36066, #36667, #55943 ) ) ; +#23866 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 63.89610994602600200, -28.37519436813181200 ) ) ; +#23867 = VERTEX_POINT ( 'NONE', #48820 ) ; +#23868 = FACE_OUTER_BOUND ( 'NONE', #19982, .T. ) ; +#23869 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026328600, 35.05000000000001800, -28.70555803802995200 ) ) ; +#23870 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23871 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#23873 = ORIENTED_EDGE ( 'NONE', *, *, #16635, .T. ) ; +#23872 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 20.43250300240229200, -28.20555803802995200 ) ) ; +#23874 = ADVANCED_FACE ( 'NONE', ( #5891 ), #66233, .F. ) ; +#23875 = CIRCLE ( 'NONE', #56802, 12.50000000000000000 ) ; +#23876 = AXIS2_PLACEMENT_3D ( 'NONE', #56039, #18786, #62324 ) ; +#23877 = CONICAL_SURFACE ( 'NONE', #58021, 10.50000000000009600, 0.7853981633974500600 ) ; +#23878 = VERTEX_POINT ( 'NONE', #80122 ) ; +#23879 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 59.28967419478899400, -28.59353418718932400 ) ) ; +#23880 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 60.66666666666667900, 8.320721403598824400 ) ) ; +#23881 = FACE_OUTER_BOUND ( 'NONE', #43831, .T. ) ; +#23882 = VERTEX_POINT ( 'NONE', #42851 ) ; +#23883 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972361100, 62.22511094383840900, -28.55192314908438100 ) ) ; +#23884 = ORIENTED_EDGE ( 'NONE', *, *, #10815, .T. ) ; +#23885 = ADVANCED_FACE ( 'NONE', ( #51571 ), #33118, .F. ) ; +#23886 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 25.83333333333333900, -6.205558038030004800 ) ) ; +#23887 = AXIS2_PLACEMENT_3D ( 'NONE', #43267, #37016, #6034 ) ; +#23888 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929814400, 75.79999999999996900, -28.70555803802997700 ) ) ; +#23889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23890 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23891 = CONICAL_SURFACE ( 'NONE', #8541, 10.50000000000009600, 0.7853981633974482800 ) ; +#23892 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23893 = ORIENTED_EDGE ( 'NONE', *, *, #24005, .T. ) ; +#23894 = CIRCLE ( 'NONE', #11195, 10.00000000000009200 ) ; +#23895 = ORIENTED_EDGE ( 'NONE', *, *, #75009, .T. ) ; +#23896 = ORIENTED_EDGE ( 'NONE', *, *, #16088, .T. ) ; +#23897 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 28.16666666666667500, 9.794441961969994300 ) ) ; +#23898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23899 = EDGE_LOOP ( 'NONE', ( #64557, #57033, #66508, #21568 ) ) ; +#23900 = EDGE_LOOP ( 'NONE', ( #24725, #19563, #976 ) ) ; +#23901 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844490300, 56.13383585008154600, -28.37247596307075500 ) ) ; +#23902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23903 = ORIENTED_EDGE ( 'NONE', *, *, #3480, .T. ) ; +#23904 = CIRCLE ( 'NONE', #47392, 10.00000000000009400 ) ; +#23905 = ORIENTED_EDGE ( 'NONE', *, *, #5101, .T. ) ; +#23906 = CARTESIAN_POINT ( 'NONE', ( -7.653735534928246800, 9.798328894942924800, -28.70352427628718700 ) ) ; +#23907 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#23908 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#23909 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003600, 81.07757630314347400, -28.53861367218463100 ) ) ; +#23910 = ADVANCED_FACE ( 'NONE', ( #68157 ), #4, .F. ) ; +#23911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23913 = ORIENTED_EDGE ( 'NONE', *, *, #77762, .T. ) ; +#23912 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2598, #39885, #8836, #52358, #15130, #58642 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082772000, 0.004114855318165544000 ), + .UNSPECIFIED. ) ; +#23914 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528190400, 39.13131911501876200, -28.51286550264508800 ) ) ; +#23915 = ORIENTED_EDGE ( 'NONE', *, *, #57396, .F. ) ; +#23916 = CIRCLE ( 'NONE', #67546, 10.00000000000009200 ) ; +#23917 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#23918 = ORIENTED_EDGE ( 'NONE', *, *, #59683, .F. ) ; +#23919 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#23920 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23921 = ORIENTED_EDGE ( 'NONE', *, *, #51365, .T. ) ; +#23922 = CONICAL_SURFACE ( 'NONE', #47017, 10.50000000000009600, 0.7853981633974500600 ) ; +#23923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23924 = EDGE_CURVE ( 'NONE', #32854, #6864, #30086, .T. ) ; +#23925 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#23926 = CARTESIAN_POINT ( 'NONE', ( 16.41529105773326300, 94.43058211546652100, -28.29658534940813700 ) ) ; +#23927 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23928 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#23929 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504962000, 28.19228657120674000, -28.53891855579988500 ) ) ; +#23930 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56123, #18868, #25137, #68648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001333132141676277200 ), + .UNSPECIFIED. ) ; +#23931 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23932 = EDGE_CURVE ( 'NONE', #24967, #27173, #15585, .T. ) ; +#23933 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828105600, 70.46231468379673400, -28.37082013777819300 ) ) ; +#23934 = AXIS2_PLACEMENT_3D ( 'NONE', #51857, #58153, #8348 ) ; +#23935 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 31.66666666666667500, -5.205558038030003100 ) ) ; +#23936 = LINE ( 'NONE', #2989, #7336 ) ; +#23937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23938 = ORIENTED_EDGE ( 'NONE', *, *, #79417, .T. ) ; +#23939 = CIRCLE ( 'NONE', #57223, 10.00000000000009200 ) ; +#23940 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#23941 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#23942 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #43613, #6378 ) ; +#23943 = CARTESIAN_POINT ( 'NONE', ( 6.295337419001928200, 57.14999999999814400, -7.612926587636437100 ) ) ; +#23944 = ORIENTED_EDGE ( 'NONE', *, *, #75135, .T. ) ; +#23945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10275, #66050, #72313, #53784 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279243834064700E-007, 0.001119324643800066700 ), + .UNSPECIFIED. ) ; +#23946 = EDGE_CURVE ( 'NONE', #23878, #61765, #16587, .T. ) ; +#23947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 67.94142842854297700, -28.20555803802997700 ) ) ; +#23948 = EDGE_CURVE ( 'NONE', #8218, #10779, #18522, .T. ) ; +#23949 = AXIS2_PLACEMENT_3D ( 'NONE', #61713, #24172, #30694 ) ; +#23950 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#23951 = FACE_OUTER_BOUND ( 'NONE', #67123, .T. ) ; +#23952 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#23953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23954 = CIRCLE ( 'NONE', #66862, 9.500000000000099500 ) ; +#23955 = EDGE_LOOP ( 'NONE', ( #60220, #71402, #48681, #20271, #51687 ) ) ; +#23956 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23957 = FACE_OUTER_BOUND ( 'NONE', #34018, .T. ) ; +#23958 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344312700, 20.67701665379241400, -28.20555803802994200 ) ) ; +#23959 = AXIS2_PLACEMENT_3D ( 'NONE', #9728, #28269, #65518 ) ; +#23961 = EDGE_LOOP ( 'NONE', ( #65447, #32916, #14371, #52114 ) ) ; +#23960 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 0.0000000000000000000, -18.70555803802997700 ) ) ; +#23962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23963 = EDGE_CURVE ( 'NONE', #50428, #28300, #1106, .T. ) ; +#23964 = EDGE_LOOP ( 'NONE', ( #42836, #74619, #46171, #29632 ) ) ; +#23965 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#23966 = AXIS2_PLACEMENT_3D ( 'NONE', #29605, #79353, #66844 ) ; +#23967 = AXIS2_PLACEMENT_3D ( 'NONE', #61883, #18348, #30615 ) ; +#23968 = CYLINDRICAL_SURFACE ( 'NONE', #8652, 10.00000000000000200 ) ; +#23969 = ADVANCED_FACE ( 'NONE', ( #53567 ), #78888, .F. ) ; +#23970 = FACE_OUTER_BOUND ( 'NONE', #76850, .T. ) ; +#23971 = EDGE_LOOP ( 'NONE', ( #30547, #16714, #37796, #24162, #19894 ) ) ; +#23972 = ORIENTED_EDGE ( 'NONE', *, *, #77636, .T. ) ; +#23973 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23974 = ORIENTED_EDGE ( 'NONE', *, *, #59295, .F. ) ; +#23975 = AXIS2_PLACEMENT_3D ( 'NONE', #48156, #54432, #17196 ) ; +#23976 = EDGE_LOOP ( 'NONE', ( #6799, #59129, #74079 ) ) ; +#23977 = ORIENTED_EDGE ( 'NONE', *, *, #78953, .T. ) ; +#23978 = CARTESIAN_POINT ( 'NONE', ( 16.87500833472982000, 80.01262610361058600, -28.29936525552496500 ) ) ; +#23979 = CONICAL_SURFACE ( 'NONE', #7832, 10.50000000000009600, 0.7853981633974500600 ) ; +#23980 = ADVANCED_FACE ( 'NONE', ( #64290 ), #31177, .T. ) ; +#23981 = CONICAL_SURFACE ( 'NONE', #60884, 10.50000000000009600, 0.7853981633974518300 ) ; +#23982 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 0.1666666666666696000, 0.1341879241256129200 ) ) ; +#23983 = VERTEX_POINT ( 'NONE', #135 ) ; +#23984 = ORIENTED_EDGE ( 'NONE', *, *, #52225, .T. ) ; +#23985 = CARTESIAN_POINT ( 'NONE', ( -5.533180123657669600, 85.79999999999998300, -28.37307693585060900 ) ) ; +#23986 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59303, #22054, #40794, #3524 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659487400, 0.0005685240369918793300 ), + .UNSPECIFIED. ) ; +#23987 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#23988 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 40.33333333333334300, 2.794441961969998300 ) ) ; +#23989 = FACE_OUTER_BOUND ( 'NONE', #76447, .T. ) ; +#23990 = AXIS2_PLACEMENT_3D ( 'NONE', #39042, #45277, #1533 ) ; +#23991 = VERTEX_POINT ( 'NONE', #56154 ) ; +#23992 = ADVANCED_FACE ( 'NONE', ( #31187 ), #29276, .T. ) ; +#23993 = VERTEX_POINT ( 'NONE', #68687 ) ; +#23994 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432712300, 18.35339758437789800, -28.20555803803009500 ) ) ; +#23995 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455600000, 61.87833896172617900, -28.53892303408255800 ) ) ; +#23996 = CONICAL_SURFACE ( 'NONE', #60068, 10.00000000000009600, 0.7853981633974482800 ) ; +#23997 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 5.500000000000016900, -7.061964498581022400 ) ) ; +#23998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23999 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654315900, 80.27440177985802400, -28.29986836858043400 ) ) ; +#24000 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.79999999999951400, -28.20555803803047800 ) ) ; +#24001 = AXIS2_PLACEMENT_3D ( 'NONE', #46751, #28339, #71820 ) ; +#24002 = EDGE_LOOP ( 'NONE', ( #3375, #72070, #72678 ) ) ; +#24003 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537349100, 61.25732391202402700, -28.20555803802997700 ) ) ; +#24004 = ADVANCED_FACE ( 'NONE', ( #12693 ), #76901, .T. ) ; +#24005 = EDGE_CURVE ( 'NONE', #5132, #72521, #67453, .T. ) ; +#24006 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 36.22261628933270600, -28.70555803802995200 ) ) ; +#24007 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000042100, 88.39962244433164100, -28.53664883431660100 ) ) ; +#24008 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715066700, 28.77966528189953300, -28.30868034705248700 ) ) ; +#24009 = AXIS2_PLACEMENT_3D ( 'NONE', #41410, #4160, #47639 ) ; +#24010 = FACE_OUTER_BOUND ( 'NONE', #45373, .T. ) ; +#24011 = ORIENTED_EDGE ( 'NONE', *, *, #70088, .F. ) ; +#24012 = CIRCLE ( 'NONE', #2948, 10.00000000000009200 ) ; +#24013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24014 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.16749699759768800, -28.20555803802997700 ) ) ; +#24015 = ORIENTED_EDGE ( 'NONE', *, *, #34161, .T. ) ; +#24017 = ORIENTED_EDGE ( 'NONE', *, *, #77139, .F. ) ; +#24016 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24018 = FACE_OUTER_BOUND ( 'NONE', #51391, .T. ) ; +#24019 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44684, #1208, #57248, #20013 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653070500 ), + .UNSPECIFIED. ) ; +#24021 = ORIENTED_EDGE ( 'NONE', *, *, #27325, .T. ) ; +#24022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24023 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819507300, 81.65075715145330500, -28.20555803802997700 ) ) ; +#24024 = FACE_OUTER_BOUND ( 'NONE', #44497, .T. ) ; +#24025 = FACE_OUTER_BOUND ( 'NONE', #38136, .T. ) ; +#24027 = EDGE_CURVE ( 'NONE', #69759, #47124, #52962, .T. ) ; +#24026 = VERTEX_POINT ( 'NONE', #50151 ) ; +#24028 = CARTESIAN_POINT ( 'NONE', ( -15.82622038785833100, 75.79999999999998300, -28.34928911331533600 ) ) ; +#24030 = EDGE_CURVE ( 'NONE', #29601, #41110, #38475, .T. ) ; +#24029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78298, #34782, #3734, #47233 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782018800, 0.0004366687057309679400 ), + .UNSPECIFIED. ) ; +#24031 = PLANE ( 'NONE', #52601 ) ; +#24032 = ORIENTED_EDGE ( 'NONE', *, *, #65557, .T. ) ; +#24033 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.16749699759768800, -28.20555803802995200 ) ) ; +#24034 = ORIENTED_EDGE ( 'NONE', *, *, #1948, .T. ) ; +#24035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24037 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24038 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#24039 = EDGE_CURVE ( 'NONE', #11, #19684, #45718, .T. ) ; +#24040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24041 = EDGE_CURVE ( 'NONE', #852, #37916, #1949, .T. ) ; +#24042 = CIRCLE ( 'NONE', #26223, 9.500000000000099500 ) ; +#24043 = AXIS2_PLACEMENT_3D ( 'NONE', #3289, #46799, #9555 ) ; +#24044 = ORIENTED_EDGE ( 'NONE', *, *, #30145, .T. ) ; +#24045 = ORIENTED_EDGE ( 'NONE', *, *, #51633, .T. ) ; +#24046 = ORIENTED_EDGE ( 'NONE', *, *, #31292, .T. ) ; +#24047 = CARTESIAN_POINT ( 'NONE', ( 12.88374526358325400, 35.04999999999997600, -28.53994725305376400 ) ) ; +#24048 = ORIENTED_EDGE ( 'NONE', *, *, #70599, .T. ) ; +#24049 = CONICAL_SURFACE ( 'NONE', #55739, 10.50000000000009900, 0.7853981633974518300 ) ; +#24050 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 46.33333333333333600, -8.133761268305512700 ) ) ; +#24051 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#24052 = VERTEX_POINT ( 'NONE', #7181 ) ; +#24053 = AXIS2_PLACEMENT_3D ( 'NONE', #67248, #30025, #73507 ) ; +#24054 = ORIENTED_EDGE ( 'NONE', *, *, #70538, .F. ) ; +#24055 = EDGE_CURVE ( 'NONE', #76568, #70191, #24076, .T. ) ; +#24056 = CARTESIAN_POINT ( 'NONE', ( -16.64738852098445700, 50.79160507727958400, -28.55816951704561600 ) ) ; +#24057 = EDGE_CURVE ( 'NONE', #37057, #70073, #62321, .T. ) ; +#24058 = EDGE_CURVE ( 'NONE', #79234, #23276, #47680, .T. ) ; +#24059 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 32.09027028261002100, -28.70555803802996000 ) ) ; +#24060 = ADVANCED_FACE ( 'NONE', ( #49623 ), #41848, .T. ) ; +#24061 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#24062 = FACE_OUTER_BOUND ( 'NONE', #56864, .T. ) ; +#24063 = VERTEX_POINT ( 'NONE', #26273 ) ; +#24064 = AXIS2_PLACEMENT_3D ( 'NONE', #37860, #19668, #7123 ) ; +#24065 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.93250300240229200, -28.20555803802996700 ) ) ; +#24066 = ORIENTED_EDGE ( 'NONE', *, *, #24687, .F. ) ; +#24067 = FACE_OUTER_BOUND ( 'NONE', #24209, .T. ) ; +#24068 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701300, 14.98096581827321200, -28.69431509262337300 ) ) ; +#24069 = CONICAL_SURFACE ( 'NONE', #31390, 10.00000000000009200, 0.7853981633974447300 ) ; +#24070 = EDGE_CURVE ( 'NONE', #49428, #25126, #9587, .T. ) ; +#24071 = ADVANCED_FACE ( 'NONE', ( #60382 ), #8731, .F. ) ; +#24072 = AXIS2_PLACEMENT_3D ( 'NONE', #7750, #51245, #14043 ) ; +#24073 = AXIS2_PLACEMENT_3D ( 'NONE', #56783, #20644, #64184 ) ; +#24074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24075 = ORIENTED_EDGE ( 'NONE', *, *, #42004, .F. ) ; +#24076 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44415, #19721, #25999, #69478 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709140800, 0.0006599881756734669000 ), + .UNSPECIFIED. ) ; +#24077 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24078 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372530200, 73.66464174796067300, -28.53896444442249300 ) ) ; +#24079 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 17.66666666666667500, 4.294441961969993400 ) ) ; +#24080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24081 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#24082 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#24083 = FACE_OUTER_BOUND ( 'NONE', #45480, .T. ) ; +#24084 = ORIENTED_EDGE ( 'NONE', *, *, #34624, .T. ) ; +#24085 = ADVANCED_FACE ( 'NONE', ( #27288 ), #56443, .F. ) ; +#24086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#24087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24089 = ORIENTED_EDGE ( 'NONE', *, *, #40994, .T. ) ; +#24090 = CIRCLE ( 'NONE', #12336, 10.00000000000009400 ) ; +#24091 = AXIS2_PLACEMENT_3D ( 'NONE', #25456, #69224, #31709 ) ; +#24092 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655522100, 31.17701665379217600, -28.20555803802996000 ) ) ; +#24093 = ORIENTED_EDGE ( 'NONE', *, *, #67302, .F. ) ; +#24094 = ADVANCED_FACE ( 'NONE', ( #58408 ), #23373, .F. ) ; +#24095 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 49.16666666666666400, -3.349151577478988200 ) ) ; +#24096 = AXIS2_PLACEMENT_3D ( 'NONE', #62002, #55705, #43193 ) ; +#24097 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24098 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195939300, 22.65857157145701000, -28.37229765499279900 ) ) ; +#24099 = CONICAL_SURFACE ( 'NONE', #8288, 10.50000000000009400, 0.7853981633974500600 ) ; +#24100 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 52.16666666666667900, 0.1341879241256129200 ) ) ; +#24101 = ORIENTED_EDGE ( 'NONE', *, *, #10470, .F. ) ; +#24102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24103 = EDGE_CURVE ( 'NONE', #47643, #69526, #75906, .T. ) ; +#24104 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533315700, 20.79130857014967000, -28.37223374938520900 ) ) ; +#24105 = AXIS2_PLACEMENT_3D ( 'NONE', #38236, #13537, #57038 ) ; +#24106 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 69.97246552159113300, -28.38801640354855100 ) ) ; +#24107 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#24108 = ORIENTED_EDGE ( 'NONE', *, *, #41357, .T. ) ; +#24109 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819153800, 89.94924284854653300, -28.20555803803030800 ) ) ; +#24110 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24112 = AXIS2_PLACEMENT_3D ( 'NONE', #59385, #46837, #71630 ) ; +#24111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32993, #70247, #51717, #14502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01103343117100363600, 0.01117762389919586800 ), + .UNSPECIFIED. ) ; +#24113 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159370300, 29.90190441413937400, -28.70555803803001600 ) ) ; +#24114 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#24115 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544025100, 60.07527064970100400, -28.39317435246130500 ) ) ; +#24116 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868846800, 90.01994747561606400, -28.24986299608863400 ) ) ; +#24117 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#24118 = FACE_OUTER_BOUND ( 'NONE', #59263, .T. ) ; +#24119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24120 = EDGE_LOOP ( 'NONE', ( #66430, #19340, #65054 ) ) ; +#24121 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408283000, 18.38586625357849500, -28.27331438134754600 ) ) ; +#24122 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811158500, 64.54539096019117000, -28.69802137271993600 ) ) ; +#24123 = VERTEX_POINT ( 'NONE', #64062 ) ; +#24124 = AXIS2_PLACEMENT_3D ( 'NONE', #59297, #3247, #71825 ) ; +#24125 = ORIENTED_EDGE ( 'NONE', *, *, #33185, .T. ) ; +#24126 = ORIENTED_EDGE ( 'NONE', *, *, #68355, .T. ) ; +#24127 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68202, #49667, #68479, #31232 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153201202596700E-007, 0.0003300514678516134500 ), + .UNSPECIFIED. ) ; +#24128 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344325100, 41.67701665379241400, -28.20555803802997400 ) ) ; +#24129 = ORIENTED_EDGE ( 'NONE', *, *, #56212, .F. ) ; +#24130 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338502400, 20.60677350908860800, -28.30799595738889400 ) ) ; +#24131 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650650200, 10.01912043132465500, -28.30223257055579500 ) ) ; +#24132 = ORIENTED_EDGE ( 'NONE', *, *, #39515, .T. ) ; +#24133 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 70.29722425778841500, -28.32715733700494500 ) ) ; +#24134 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655344100, 10.17701665379216200, -28.20555803803002000 ) ) ; +#24135 = FACE_OUTER_BOUND ( 'NONE', #79628, .T. ) ; +#24136 = ORIENTED_EDGE ( 'NONE', *, *, #38233, .T. ) ; +#24137 = EDGE_CURVE ( 'NONE', #51121, #19524, #74956, .T. ) ; +#24138 = EDGE_LOOP ( 'NONE', ( #34996, #64271, #59995, #23407 ) ) ; +#24139 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488151300, 59.60439022488343900, -28.70555803803014400 ) ) ; +#24140 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 58.50000000000000700, -9.258116921287651700 ) ) ; +#24141 = ORIENTED_EDGE ( 'NONE', *, *, #24240, .F. ) ; +#24142 = EDGE_CURVE ( 'NONE', #7149, #4256, #61485, .T. ) ; +#24143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24144 = CIRCLE ( 'NONE', #23522, 10.50000000000009600 ) ; +#24145 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 23.66666666666667500, 3.124568980892192800 ) ) ; +#24146 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719564100, 53.65857157145692500, -28.37229765499325000 ) ) ; +#24147 = EDGE_CURVE ( 'NONE', #35392, #49674, #46964, .T. ) ; +#24148 = ORIENTED_EDGE ( 'NONE', *, *, #77142, .F. ) ; +#24149 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #65239, 'distance_accuracy_value', 'NONE'); +#24150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24151 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24152 = EDGE_CURVE ( 'NONE', #39888, #26414, #32529, .T. ) ; +#24153 = EDGE_CURVE ( 'NONE', #76092, #75483, #18070, .T. ) ; +#24154 = FACE_OUTER_BOUND ( 'NONE', #37322, .T. ) ; +#24155 = EDGE_LOOP ( 'NONE', ( #35209, #29893, #32454 ) ) ; +#24156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24157 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#24158 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 26.00000000000001100, -12.20555803803000200 ) ) ; +#24159 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343035100, 70.65007990305427700, -28.43638873268705300 ) ) ; +#24160 = EDGE_LOOP ( 'NONE', ( #24666, #49610, #37723, #52645 ) ) ; +#24161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24162 = ORIENTED_EDGE ( 'NONE', *, *, #36914, .F. ) ; +#24163 = CYLINDRICAL_SURFACE ( 'NONE', #25321, 10.00000000000000200 ) ; +#24164 = AXIS2_PLACEMENT_3D ( 'NONE', #35203, #78715, #41419 ) ; +#24165 = EDGE_CURVE ( 'NONE', #40239, #21332, #3590, .T. ) ; +#24166 = EDGE_CURVE ( 'NONE', #37428, #26859, #69918, .T. ) ; +#24167 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707777200, 79.93589406416700200, -28.68054222049973800 ) ) ; +#24168 = EDGE_CURVE ( 'NONE', #5208, #19684, #39905, .T. ) ; +#24169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63579, #7769, #51261, #14064 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722310874900E-007, 0.001076779618376922300 ), + .UNSPECIFIED. ) ; +#24171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24173 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056677100, 35.04999999999997600, -28.70555803802995200 ) ) ; +#24174 = AXIS2_PLACEMENT_3D ( 'NONE', #20017, #63539, #26282 ) ; +#24175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24176 = CIRCLE ( 'NONE', #25497, 10.00000000000009400 ) ; +#24177 = ORIENTED_EDGE ( 'NONE', *, *, #25197, .T. ) ; +#24178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24179 = ADVANCED_FACE ( 'NONE', ( #73019 ), #21432, .T. ) ; +#24180 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736721500, 14.05000000000000200, -28.70555803802992800 ) ) ; +#24181 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24182 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#24183 = ORIENTED_EDGE ( 'NONE', *, *, #17954, .F. ) ; +#24184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24185 = ADVANCED_FACE ( 'NONE', ( #6805 ), #69097, .F. ) ; +#24186 = ORIENTED_EDGE ( 'NONE', *, *, #36315, .T. ) ; +#24187 = AXIS2_PLACEMENT_3D ( 'NONE', #22898, #29198, #60174 ) ; +#24188 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629200, 90.80000000000001100, -28.55171188418377400 ) ) ; +#24189 = AXIS2_PLACEMENT_3D ( 'NONE', #69258, #32261, #50729 ) ; +#24190 = AXIS2_PLACEMENT_3D ( 'NONE', #75066, #6786, #50267 ) ; +#24191 = ADVANCED_FACE ( 'NONE', ( #54500 ), #36015, .F. ) ; +#24192 = CONICAL_SURFACE ( 'NONE', #41535, 10.00000000000009600, 0.7853981633974447300 ) ; +#24193 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 77.94142842854297700, -28.20555803802997700 ) ) ; +#24194 = FACE_OUTER_BOUND ( 'NONE', #57817, .T. ) ; +#24195 = ORIENTED_EDGE ( 'NONE', *, *, #18066, .T. ) ; +#24196 = VERTEX_POINT ( 'NONE', #58849 ) ; +#24197 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 29.50000000000002100, 4.650848422521012700 ) ) ; +#24198 = VERTEX_POINT ( 'NONE', #21612 ) ; +#24199 = CONICAL_SURFACE ( 'NONE', #77292, 10.00000000000009400, 0.7853981633974447300 ) ; +#24200 = ORIENTED_EDGE ( 'NONE', *, *, #14784, .F. ) ; +#24201 = VERTEX_POINT ( 'NONE', #27879 ) ; +#24202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26383, #13611, #1320, #32603 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799622254300E-007, 0.0005050252131284595300 ), + .UNSPECIFIED. ) ; +#24203 = ORIENTED_EDGE ( 'NONE', *, *, #21540, .F. ) ; +#24204 = VERTEX_POINT ( 'NONE', #52574 ) ; +#24205 = ORIENTED_EDGE ( 'NONE', *, *, #22832, .T. ) ; +#24206 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 18.52242369685793800, -28.53861367218588900 ) ) ; +#24207 = AXIS2_PLACEMENT_3D ( 'NONE', #23465, #66986, #29752 ) ; +#24209 = EDGE_LOOP ( 'NONE', ( #16708, #59917, #6770, #62306 ) ) ; +#24208 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#24210 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24211 = CARTESIAN_POINT ( 'NONE', ( 7.921807905389713700, 57.14999999999960800, -3.245648801398739900 ) ) ; +#24212 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24213 = ORIENTED_EDGE ( 'NONE', *, *, #5450, .F. ) ; +#24214 = FACE_OUTER_BOUND ( 'NONE', #53697, .T. ) ; +#24215 = ORIENTED_EDGE ( 'NONE', *, *, #76209, .F. ) ; +#24216 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24217 = ORIENTED_EDGE ( 'NONE', *, *, #66822, .T. ) ; +#24218 = EDGE_CURVE ( 'NONE', #70358, #50519, #52520, .T. ) ; +#24219 = EDGE_LOOP ( 'NONE', ( #42188, #59391, #24295, #45453 ) ) ; +#24220 = VERTEX_POINT ( 'NONE', #40074 ) ; +#24221 = AXIS2_PLACEMENT_3D ( 'NONE', #16345, #59872, #22589 ) ; +#24222 = CIRCLE ( 'NONE', #25566, 10.00000000000009400 ) ; +#24223 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24224 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042473200, 48.50972971738993800, -28.70555803802997400 ) ) ; +#24225 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24226 = ORIENTED_EDGE ( 'NONE', *, *, #20687, .T. ) ; +#24227 = AXIS2_PLACEMENT_3D ( 'NONE', #17283, #60822, #23536 ) ; +#24228 = FACE_OUTER_BOUND ( 'NONE', #7956, .T. ) ; +#24230 = ORIENTED_EDGE ( 'NONE', *, *, #37833, .T. ) ; +#24229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24231 = ORIENTED_EDGE ( 'NONE', *, *, #43421, .F. ) ; +#24232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24233 = VERTEX_POINT ( 'NONE', #40342 ) ; +#24234 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, -1.999999999999987300, -1.205558038030002800 ) ) ; +#24235 = AXIS2_PLACEMENT_3D ( 'NONE', #60458, #23173, #66689 ) ; +#24236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35068, #16550, #66319, #29105 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735986244900E-007, 0.0009376786059871875700 ), + .UNSPECIFIED. ) ; +#24237 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 38.16666666666665000, -3.349151577478988200 ) ) ; +#24238 = CARTESIAN_POINT ( 'NONE', ( 1.116254736416758300, 35.04999999999997600, -28.53994725305376400 ) ) ; +#24239 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#24240 = EDGE_CURVE ( 'NONE', #2762, #61209, #71044, .T. ) ; +#24241 = CONICAL_SURFACE ( 'NONE', #25979, 10.50000000000009600, 0.7853981633974500600 ) ; +#24242 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 49.74722181384564800, -28.70555803802999200 ) ) ; +#24243 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 48.12623792124937700, -28.70555803802996700 ) ) ; +#24244 = CONICAL_SURFACE ( 'NONE', #63524, 10.50000000000009600, 0.7853981633974518300 ) ; +#24245 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 3.333333333333341000, 2.794441961969998300 ) ) ; +#24246 = ORIENTED_EDGE ( 'NONE', *, *, #7652, .T. ) ; +#24247 = ORIENTED_EDGE ( 'NONE', *, *, #34415, .T. ) ; +#24248 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 65.80000000000001100, -28.70555803802997700 ) ) ; +#24249 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#24250 = ORIENTED_EDGE ( 'NONE', *, *, #46489, .F. ) ; +#24251 = ADVANCED_FACE ( 'NONE', ( #25330 ), #50554, .F. ) ; +#24252 = FACE_OUTER_BOUND ( 'NONE', #35684, .T. ) ; +#24253 = ORIENTED_EDGE ( 'NONE', *, *, #45399, .F. ) ; +#24254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24255 = LINE ( 'NONE', #34619, #28197 ) ; +#24256 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428560500, 18.07141756547892400, -28.70555803802992800 ) ) ; +#24257 = VERTEX_POINT ( 'NONE', #40616 ) ; +#24259 = EDGE_CURVE ( 'NONE', #24557, #54750, #55454, .T. ) ; +#24258 = VERTEX_POINT ( 'NONE', #3348 ) ; +#24260 = EDGE_CURVE ( 'NONE', #47181, #49285, #4858, .T. ) ; +#24261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24262 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24263 = ORIENTED_EDGE ( 'NONE', *, *, #11438, .F. ) ; +#24264 = CIRCLE ( 'NONE', #38661, 10.50000000000009600 ) ; +#24265 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326900, 60.79999999999991200, -28.55171188418385200 ) ) ; +#24266 = ORIENTED_EDGE ( 'NONE', *, *, #63372, .T. ) ; +#24267 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 49.65930907398620800, -28.35186440610858900 ) ) ; +#24268 = ORIENTED_EDGE ( 'NONE', *, *, #79417, .F. ) ; +#24269 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24270 = ORIENTED_EDGE ( 'NONE', *, *, #69784, .T. ) ; +#24271 = ORIENTED_EDGE ( 'NONE', *, *, #33432, .F. ) ; +#24272 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252817900, 49.63131911501876200, -28.51286550264511300 ) ) ; +#24273 = ORIENTED_EDGE ( 'NONE', *, *, #41165, .T. ) ; +#24274 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880586900, 23.92896305882237600, -28.53160243214819000 ) ) ; +#24275 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153688600, 80.79999999999999700, -28.55171188418376700 ) ) ; +#24276 = ADVANCED_FACE ( 'NONE', ( #19463 ), #947, .T. ) ; +#24277 = CARTESIAN_POINT ( 'NONE', ( -10.37141821671362000, 80.16749699759769500, -28.25056166218020300 ) ) ; +#24278 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#24279 = AXIS2_PLACEMENT_3D ( 'NONE', #57777, #26787, #45222 ) ; +#24280 = ORIENTED_EDGE ( 'NONE', *, *, #62476, .F. ) ; +#24281 = EDGE_CURVE ( 'NONE', #60981, #23320, #17526, .T. ) ; +#24282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24283 = EDGE_CURVE ( 'NONE', #31617, #54333, #34054, .T. ) ; +#24284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24285 = EDGE_CURVE ( 'NONE', #58931, #60588, #37931, .T. ) ; +#24286 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#24287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24288 = EDGE_CURVE ( 'NONE', #52334, #45538, #41011, .T. ) ; +#24289 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 61.96823913367206400, -28.70555803802997700 ) ) ; +#24290 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#24291 = FACE_OUTER_BOUND ( 'NONE', #55568, .T. ) ; +#24292 = AXIS2_PLACEMENT_3D ( 'NONE', #31259, #62260, #68511 ) ; +#24293 = VERTEX_POINT ( 'NONE', #72191 ) ; +#24294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24295 = ORIENTED_EDGE ( 'NONE', *, *, #4930, .T. ) ; +#24296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24297 = EDGE_LOOP ( 'NONE', ( #10128, #4996, #8808 ) ) ; +#24298 = ORIENTED_EDGE ( 'NONE', *, *, #57845, .F. ) ; +#24299 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 51.43650294695131500, -28.30782889147482400 ) ) ; +#24300 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54955, #61250, #23978, #67468 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002240675813178884300, 0.0006556005030039087100 ), + .UNSPECIFIED. ) ; +#24301 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.66749699759768400, -28.20555803802994200 ) ) ; +#24302 = CIRCLE ( 'NONE', #50993, 9.500000000000095900 ) ; +#24303 = AXIS2_PLACEMENT_3D ( 'NONE', #70356, #33114, #76612 ) ; +#24304 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653752100, 90.20590598242372900, -28.39369363572360100 ) ) ; +#24305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24306 = VERTEX_POINT ( 'NONE', #78716 ) ; +#24307 = AXIS2_PLACEMENT_3D ( 'NONE', #25207, #68712, #31478 ) ; +#24308 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24309 = CARTESIAN_POINT ( 'NONE', ( -9.254657264814724700, 41.50380841767829300, -28.64142799534481700 ) ) ; +#24310 = ORIENTED_EDGE ( 'NONE', *, *, #72457, .F. ) ; +#24311 = ADVANCED_FACE ( 'NONE', ( #43771 ), #79803, .T. ) ; +#24312 = CONICAL_SURFACE ( 'NONE', #15523, 10.00000000000009200, 0.7853981633974447300 ) ; +#24313 = ORIENTED_EDGE ( 'NONE', *, *, #42481, .T. ) ; +#24314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24315 = ORIENTED_EDGE ( 'NONE', *, *, #53687, .T. ) ; +#24316 = ORIENTED_EDGE ( 'NONE', *, *, #25277, .F. ) ; +#24317 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 44.16666666666668600, 6.794441961969992500 ) ) ; +#24318 = CARTESIAN_POINT ( 'NONE', ( 3.935438998026991300, 71.50961459723741600, -28.29483879644655900 ) ) ; +#24319 = AXIS2_PLACEMENT_3D ( 'NONE', #40785, #28343, #47026 ) ; +#24320 = EDGE_CURVE ( 'NONE', #17474, #48799, #26574, .T. ) ; +#24321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24322 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310477800, 41.49769010897086500, -28.61774594594330900 ) ) ; +#24323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24324 = FACE_OUTER_BOUND ( 'NONE', #28462, .T. ) ; +#24325 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686400, 31.17701665379241000, -28.20555803802996000 ) ) ; +#24326 = EDGE_CURVE ( 'NONE', #7612, #27405, #67154, .T. ) ; +#24327 = CONICAL_SURFACE ( 'NONE', #38934, 10.00000000000009200, 0.7853981633974447300 ) ; +#24328 = VERTEX_POINT ( 'NONE', #23661 ) ; +#24329 = AXIS2_PLACEMENT_3D ( 'NONE', #70219, #1944, #38935 ) ; +#24330 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459551700, 82.51973550835661800, -28.70555803802996700 ) ) ; +#24331 = ORIENTED_EDGE ( 'NONE', *, *, #22987, .F. ) ; +#24332 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24333 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 15.50000000000001100, -9.258116921287651700 ) ) ; +#24334 = CIRCLE ( 'NONE', #59161, 10.00000000000009200 ) ; +#24335 = VERTEX_POINT ( 'NONE', #10432 ) ; +#24336 = CONICAL_SURFACE ( 'NONE', #47864, 10.50000000000009600, 0.7853981633974518300 ) ; +#24337 = AXIS2_PLACEMENT_3D ( 'NONE', #40444, #3166, #46672 ) ; +#24338 = VERTEX_POINT ( 'NONE', #47650 ) ; +#24340 = ORIENTED_EDGE ( 'NONE', *, *, #50897, .F. ) ; +#24339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25879, #75621, #44556, #7337, #50840, #13646 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249978169400, 0.003859526499956338800 ), + .UNSPECIFIED. ) ; +#24341 = FACE_OUTER_BOUND ( 'NONE', #80764, .T. ) ; +#24342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24343 = EDGE_LOOP ( 'NONE', ( #45616, #19207, #17261, #77295 ) ) ; +#24344 = EDGE_LOOP ( 'NONE', ( #51555, #31532, #26375 ) ) ; +#24345 = ORIENTED_EDGE ( 'NONE', *, *, #61225, .F. ) ; +#24346 = ORIENTED_EDGE ( 'NONE', *, *, #53789, .T. ) ; +#24347 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.22294471194861400, -28.20555803802997700 ) ) ; +#24348 = ORIENTED_EDGE ( 'NONE', *, *, #43068, .F. ) ; +#24349 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101700, 29.79999999999999000, -28.45034744217088400 ) ) ; +#24350 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 90.16749699759768100, -28.20555803802997700 ) ) ; +#24351 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10273, #66567, #4546, #48028 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.504625015047567300E-016, 0.001871986839426636000 ), + .UNSPECIFIED. ) ; +#24352 = ORIENTED_EDGE ( 'NONE', *, *, #58142, .F. ) ; +#24353 = AXIS2_PLACEMENT_3D ( 'NONE', #40689, #34467, #3429 ) ; +#24354 = ADVANCED_FACE ( 'NONE', ( #48617 ), #30194, .F. ) ; +#24355 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719597500, 26.44142842854297400, -28.37229765499276400 ) ) ; +#24356 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55693, #12474, #31252, #74755 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634786710600E-007, 0.0008082706238602634000 ), + .UNSPECIFIED. ) ; +#24357 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 47.00000000000002800, -1.205558038030006400 ) ) ; +#24358 = ORIENTED_EDGE ( 'NONE', *, *, #2537, .T. ) ; +#24359 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 25.96443389862716300, -28.54207364681940000 ) ) ; +#24360 = CONICAL_SURFACE ( 'NONE', #15090, 10.50000000000009600, 0.7853981633974518300 ) ; +#24361 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714283800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#24362 = EDGE_CURVE ( 'NONE', #59532, #55468, #12089, .T. ) ; +#24363 = EDGE_LOOP ( 'NONE', ( #78270, #23285, #42425, #27812 ) ) ; +#24364 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 50.00000000000002100, -1.205558038030002800 ) ) ; +#24365 = ORIENTED_EDGE ( 'NONE', *, *, #19497, .F. ) ; +#24366 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#24367 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.80000000000008600, -28.70555803802994200 ) ) ; +#24368 = ORIENTED_EDGE ( 'NONE', *, *, #36732, .T. ) ; +#24369 = ORIENTED_EDGE ( 'NONE', *, *, #75983, .T. ) ; +#24370 = VERTEX_POINT ( 'NONE', #79480 ) ; +#24371 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807148400, 56.79999999999998300, -28.70555803802997700 ) ) ; +#24372 = CIRCLE ( 'NONE', #4543, 9.500000000000097700 ) ; +#24373 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 81.43945992495534400, -28.34042301926880800 ) ) ; +#24374 = ADVANCED_FACE ( 'NONE', ( #46664 ), #77836, .F. ) ; +#24375 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312778200, 30.99769010897088600, -28.61774594593774500 ) ) ; +#24376 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466625000, 30.26893971291459100, -28.57333386111660900 ) ) ; +#24377 = ORIENTED_EDGE ( 'NONE', *, *, #33684, .F. ) ; +#24378 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30788, #37009, #55777, #18532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.002333577134203754800 ), + .UNSPECIFIED. ) ; +#24379 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#24380 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#24381 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24382 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658256900, 39.15151454780962600, -28.67627428870437000 ) ) ; +#24383 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#24384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24385 = EDGE_CURVE ( 'NONE', #48736, #2521, #13629, .T. ) ; +#24386 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285715300, 43.67681279774500800, -28.70555803802997700 ) ) ; +#24387 = CIRCLE ( 'NONE', #61881, 10.00000000000009600 ) ; +#24389 = VERTEX_POINT ( 'NONE', #48690 ) ; +#24388 = ADVANCED_FACE ( 'NONE', ( #32102 ), #28246, .F. ) ; +#24390 = ADVANCED_FACE ( 'NONE', ( #15562 ), #75879, .T. ) ; +#24391 = EDGE_CURVE ( 'NONE', #25229, #14429, #78423, .T. ) ; +#24392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24393 = ORIENTED_EDGE ( 'NONE', *, *, #4361, .T. ) ; +#24394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24397 = PLANE ( 'NONE', #93 ) ; +#24398 = EDGE_CURVE ( 'NONE', #42864, #5570, #63975, .T. ) ; +#24399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24400 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#24401 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78485, #34960, #3927, #47410 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401247800, 0.004682530427070974800 ), + .UNSPECIFIED. ) ; +#24402 = ADVANCED_FACE ( 'NONE', ( #2895 ), #42779, .T. ) ; +#24403 = EDGE_CURVE ( 'NONE', #17315, #3936, #59345, .T. ) ; +#24404 = AXIS2_PLACEMENT_3D ( 'NONE', #65933, #28706, #72190 ) ; +#24405 = FACE_OUTER_BOUND ( 'NONE', #80064, .T. ) ; +#24406 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 56.33333333333335000, 4.294441961970000500 ) ) ; +#24407 = ORIENTED_EDGE ( 'NONE', *, *, #2439, .T. ) ; +#24408 = VERTEX_POINT ( 'NONE', #24242 ) ; +#24409 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544465100, 71.87833896172674000, -28.53892303408252900 ) ) ; +#24410 = ORIENTED_EDGE ( 'NONE', *, *, #33665, .F. ) ; +#24411 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 21.50000000000001100, -4.865812075874393000 ) ) ; +#24412 = AXIS2_PLACEMENT_3D ( 'NONE', #22757, #29066, #60043 ) ; +#24413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24414 = EDGE_CURVE ( 'NONE', #46838, #79988, #11676, .T. ) ; +#24415 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24416 = EDGE_CURVE ( 'NONE', #18050, #45612, #49445, .T. ) ; +#24417 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24418 = AXIS2_PLACEMENT_3D ( 'NONE', #27316, #20779, #70529 ) ; +#24419 = FACE_OUTER_BOUND ( 'NONE', #31735, .T. ) ; +#24420 = VERTEX_POINT ( 'NONE', #18256 ) ; +#24421 = VERTEX_POINT ( 'NONE', #67765 ) ; +#24422 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24423 = CONICAL_SURFACE ( 'NONE', #14644, 10.00000000000009400, 0.7853981633974447300 ) ; +#24424 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 23.83333333333333900, 9.794441961969999600 ) ) ; +#24425 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 70.90033558196107300, -28.70555803802997700 ) ) ; +#24426 = ORIENTED_EDGE ( 'NONE', *, *, #11173, .F. ) ; +#24427 = ORIENTED_EDGE ( 'NONE', *, *, #16187, .F. ) ; +#24428 = ORIENTED_EDGE ( 'NONE', *, *, #69990, .T. ) ; +#24429 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 80.16749699759736800, -28.20555803803047800 ) ) ; +#24430 = VERTEX_POINT ( 'NONE', #30780 ) ; +#24432 = ORIENTED_EDGE ( 'NONE', *, *, #34515, .F. ) ; +#24431 = EDGE_CURVE ( 'NONE', #10012, #72036, #63275, .T. ) ; +#24433 = AXIS2_PLACEMENT_3D ( 'NONE', #75911, #7356, #63434 ) ; +#24434 = AXIS2_PLACEMENT_3D ( 'NONE', #73584, #79843, #67325 ) ; +#24435 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 89.97246552159114700, -28.38801640354856600 ) ) ; +#24436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24437 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24438 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#24439 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#24440 = CARTESIAN_POINT ( 'NONE', ( 5.883745263583247900, 45.54999999999998300, -28.53994725305377100 ) ) ; +#24441 = CONICAL_SURFACE ( 'NONE', #11423, 10.50000000000009600, 0.7853981633974500600 ) ; +#24442 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181873500, 51.65075715145283700, -28.20555803803047800 ) ) ; +#24443 = ORIENTED_EDGE ( 'NONE', *, *, #9617, .F. ) ; +#24444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24445 = ORIENTED_EDGE ( 'NONE', *, *, #7055, .F. ) ; +#24446 = EDGE_LOOP ( 'NONE', ( #43811, #33295, #59101, #30616 ) ) ; +#24447 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#24448 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825478400, 90.16054007504463600, -28.34042301926890100 ) ) ; +#24449 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999957000, 71.62753447840813700, -28.38801640354866900 ) ) ; +#24450 = ORIENTED_EDGE ( 'NONE', *, *, #18770, .T. ) ; +#24451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24452 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465423500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#24453 = FACE_OUTER_BOUND ( 'NONE', #25067, .T. ) ; +#24454 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24455 = ORIENTED_EDGE ( 'NONE', *, *, #80409, .F. ) ; +#24456 = ADVANCED_FACE ( 'NONE', ( #9703 ), #24312, .T. ) ; +#24457 = ORIENTED_EDGE ( 'NONE', *, *, #50803, .F. ) ; +#24458 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609138100, 90.13716795162604000, -28.48697406221693000 ) ) ; +#24459 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29018, #10472, #35500, #79030 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839425555700 ), + .UNSPECIFIED. ) ; +#24460 = CARTESIAN_POINT ( 'NONE', ( 1.899882735204325700, 24.55000000000000100, -28.53808257741932100 ) ) ; +#24461 = AXIS2_PLACEMENT_3D ( 'NONE', #41659, #4408, #60196 ) ; +#24462 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 27.33333333333335300, -8.133761268305512700 ) ) ; +#24463 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825478400, 90.16054007504463600, -28.34042301926890100 ) ) ; +#24464 = FACE_OUTER_BOUND ( 'NONE', #77839, .T. ) ; +#24465 = CARTESIAN_POINT ( 'NONE', ( -4.722391605213471300, 50.54999999999999700, -28.70555803802997400 ) ) ; +#24466 = ORIENTED_EDGE ( 'NONE', *, *, #16164, .T. ) ; +#24467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24468 = ADVANCED_FACE ( 'NONE', ( #57385 ), #72008, .F. ) ; +#24469 = AXIS2_PLACEMENT_3D ( 'NONE', #49346, #61652, #55628 ) ; +#24470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24471 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 20.67701665379184600, -28.20555803802994200 ) ) ; +#24472 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9990, #78272, #59779, #22512 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293794500, 0.0007746639185392720700 ), + .UNSPECIFIED. ) ; +#24473 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#24474 = EDGE_CURVE ( 'NONE', #31448, #19993, #7730, .T. ) ; +#24475 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#24476 = AXIS2_PLACEMENT_3D ( 'NONE', #68874, #31637, #75134 ) ; +#24477 = ADVANCED_FACE ( 'NONE', ( #73952 ), #22349, .F. ) ; +#24478 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70605, #77135, #58638, #21399 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.337363765931740000E-016, 0.001179148174663048900 ), + .UNSPECIFIED. ) ; +#24479 = VERTEX_POINT ( 'NONE', #68564 ) ; +#24480 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#24481 = EDGE_LOOP ( 'NONE', ( #37432, #53942, #31454, #47780 ) ) ; +#24482 = ORIENTED_EDGE ( 'NONE', *, *, #61805, .F. ) ; +#24483 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310632700, 81.49769010897038900, -28.61774594594310300 ) ) ; +#24484 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#24485 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#24486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79299, #4219, #48245, #11032 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061362300E-007, 0.001119323292485705800 ), + .UNSPECIFIED. ) ; +#24488 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24489 = ADVANCED_FACE ( 'NONE', ( #40841 ), #70021, .T. ) ; +#24490 = CIRCLE ( 'NONE', #10102, 10.00000000000009200 ) ; +#24491 = ORIENTED_EDGE ( 'NONE', *, *, #77392, .F. ) ; +#24492 = ORIENTED_EDGE ( 'NONE', *, *, #51192, .T. ) ; +#24493 = EDGE_CURVE ( 'NONE', #29006, #73303, #44688, .T. ) ; +#24494 = CONICAL_SURFACE ( 'NONE', #75053, 10.50000000000009600, 0.7853981633974500600 ) ; +#24495 = EDGE_CURVE ( 'NONE', #24198, #14665, #61326, .T. ) ; +#24496 = ORIENTED_EDGE ( 'NONE', *, *, #60095, .T. ) ; +#24497 = ORIENTED_EDGE ( 'NONE', *, *, #73141, .F. ) ; +#24498 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#24499 = ORIENTED_EDGE ( 'NONE', *, *, #63476, .T. ) ; +#24500 = ADVANCED_FACE ( 'NONE', ( #38855 ), #3833, .F. ) ; +#24501 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 71.00000000000000000, -1.205558038030002800 ) ) ; +#24502 = FACE_OUTER_BOUND ( 'NONE', #2154, .T. ) ; +#24503 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328940900, 49.36201280598323400, -28.29447340919135100 ) ) ; +#24504 = EDGE_CURVE ( 'NONE', #77464, #59974, #20401, .T. ) ; +#24505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24506 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 36.00000000000001400, -1.205558038030005300 ) ) ; +#24507 = EDGE_CURVE ( 'NONE', #19600, #53551, #55425, .T. ) ; +#24508 = VERTEX_POINT ( 'NONE', #44028 ) ; +#24509 = CONICAL_SURFACE ( 'NONE', #36878, 10.00000000000009200, 0.7853981633974447300 ) ; +#24510 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#24511 = ORIENTED_EDGE ( 'NONE', *, *, #13789, .T. ) ; +#24512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24513 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001200, 10.46823913367203900, -28.70555803802994200 ) ) ; +#24514 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ; +#24515 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 1.166666666666679800, -3.349151577478988200 ) ) ; +#24516 = VERTEX_POINT ( 'NONE', #19312 ) ; +#24517 = ORIENTED_EDGE ( 'NONE', *, *, #64799, .T. ) ; +#24518 = ORIENTED_EDGE ( 'NONE', *, *, #21198, .F. ) ; +#24519 = FACE_OUTER_BOUND ( 'NONE', #75094, .T. ) ; +#24520 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459498900, 89.08026449164323400, -28.70555803803006300 ) ) ; +#24521 = AXIS2_PLACEMENT_3D ( 'NONE', #33657, #58413, #8868 ) ; +#24522 = EDGE_CURVE ( 'NONE', #55227, #51373, #35053, .T. ) ; +#24523 = EDGE_CURVE ( 'NONE', #46776, #68993, #65234, .T. ) ; +#24524 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7595, #75615, #32643, #76149 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213717221200E-007, 0.0008724366121415436000 ), + .UNSPECIFIED. ) ; +#24525 = CARTESIAN_POINT ( 'NONE', ( 4.745461813558880400, 18.09617548195236800, -28.64146967277553600 ) ) ; +#24526 = EDGE_CURVE ( 'NONE', #78578, #21529, #53490, .T. ) ; +#24527 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290090400, 31.03732497909459600, -28.41043597897466800 ) ) ; +#24528 = ORIENTED_EDGE ( 'NONE', *, *, #495, .F. ) ; +#24529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24530 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#24531 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#24532 = AXIS2_PLACEMENT_3D ( 'NONE', #53224, #59507, #9715 ) ; +#24533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24534 = CIRCLE ( 'NONE', #76872, 10.50000000000009600 ) ; +#24535 = VERTEX_POINT ( 'NONE', #69349 ) ; +#24536 = ORIENTED_EDGE ( 'NONE', *, *, #62539, .F. ) ; +#24537 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 15.46443389862718500, -28.54207364681937500 ) ) ; +#24538 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24539 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24540 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#24541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24542 = EDGE_CURVE ( 'NONE', #73926, #74152, #36927, .T. ) ; +#24543 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844490800, 75.79999999999982700, -28.20555803803014400 ) ) ; +#24544 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844501000, 55.46616414991842000, -28.37247596307076200 ) ) ; +#24545 = AXIS2_PLACEMENT_3D ( 'NONE', #36992, #80533, #43247 ) ; +#24546 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730044800, 80.01262610361115400, -28.29936525552468400 ) ) ; +#24547 = AXIS2_PLACEMENT_3D ( 'NONE', #8138, #51648, #14436 ) ; +#24548 = CARTESIAN_POINT ( 'NONE', ( -3.935444260775057500, 80.09037803491489200, -28.29483400905883200 ) ) ; +#24549 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 66.12096679557699000, -28.36604143581847700 ) ) ; +#24550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24551 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 14.05000000000000600, -28.20555803802992800 ) ) ; +#24552 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.68929190448941200, -28.20555803802995200 ) ) ; +#24553 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24556 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24557 = VERTEX_POINT ( 'NONE', #7323 ) ; +#24558 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 68.39962244433176900, -28.53664883431612200 ) ) ; +#24559 = ORIENTED_EDGE ( 'NONE', *, *, #63266, .T. ) ; +#24560 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#24561 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24562 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#24563 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819088100, 71.65075715145258100, -28.20555803803014100 ) ) ; +#24564 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35, #24549, #6310, #49785 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082045437600E-007, 0.001076191670833090700 ), + .UNSPECIFIED. ) ; +#24565 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#24566 = CIRCLE ( 'NONE', #10580, 10.50000000000009600 ) ; +#24567 = AXIS2_PLACEMENT_3D ( 'NONE', #8212, #51719, #14506 ) ; +#24568 = VERTEX_POINT ( 'NONE', #50556 ) ; +#24569 = CONICAL_SURFACE ( 'NONE', #24319, 10.50000000000009600, 0.7853981633974518300 ) ; +#24570 = VERTEX_POINT ( 'NONE', #19866 ) ; +#24571 = ADVANCED_FACE ( 'NONE', ( #35015 ), #1867, .T. ) ; +#24572 = ORIENTED_EDGE ( 'NONE', *, *, #33235, .T. ) ; +#24573 = CONICAL_SURFACE ( 'NONE', #15284, 10.00000000000009600, 0.7853981633974447300 ) ; +#24574 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 30.72294471194860000, -28.20555803802996700 ) ) ; +#24575 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30100, #23825, #42548, #5308 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454575920800E-007, 0.0004559726636569930400 ), + .UNSPECIFIED. ) ; +#24576 = ORIENTED_EDGE ( 'NONE', *, *, #65879, .F. ) ; +#24577 = ORIENTED_EDGE ( 'NONE', *, *, #10219, .T. ) ; +#24578 = ADVANCED_FACE ( 'NONE', ( #51494 ), #16503, .T. ) ; +#24579 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 42.00000000000000700, -9.205558038030005700 ) ) ; +#24580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24581 = AXIS2_PLACEMENT_3D ( 'NONE', #11216, #42175, #48425 ) ; +#24582 = FACE_OUTER_BOUND ( 'NONE', #39469, .T. ) ; +#24583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24584 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.16749699759768100, -28.20555803802997700 ) ) ; +#24585 = CARTESIAN_POINT ( 'NONE', ( -15.02626848327743200, 55.71754128061479600, -28.70555803803001600 ) ) ; +#24586 = ADVANCED_FACE ( 'NONE', ( #68086 ), #64212, .T. ) ; +#24587 = EDGE_CURVE ( 'NONE', #5753, #4991, #80725, .T. ) ; +#24588 = VERTEX_POINT ( 'NONE', #45086 ) ; +#24589 = CIRCLE ( 'NONE', #14978, 10.00000000000009400 ) ; +#24590 = AXIS2_PLACEMENT_3D ( 'NONE', #18912, #25175, #56159 ) ; +#24591 = ORIENTED_EDGE ( 'NONE', *, *, #39385, .F. ) ; +#24592 = EDGE_LOOP ( 'NONE', ( #2763, #41667, #52739, #2432 ) ) ; +#24593 = ORIENTED_EDGE ( 'NONE', *, *, #65643, .T. ) ; +#24594 = VERTEX_POINT ( 'NONE', #76135 ) ; +#24595 = CONICAL_SURFACE ( 'NONE', #45990, 10.00000000000009400, 0.7853981633974447300 ) ; +#24596 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#24597 = VERTEX_POINT ( 'NONE', #63933 ) ; +#24598 = FACE_OUTER_BOUND ( 'NONE', #40372, .T. ) ; +#24599 = ORIENTED_EDGE ( 'NONE', *, *, #57382, .T. ) ; +#24600 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124977800, 65.13282980700522300, -28.53914313452736500 ) ) ; +#24601 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78085, #28358, #9813, #53317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941486200, 0.001517194977238254000 ), + .UNSPECIFIED. ) ; +#24602 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000002700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#24603 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24605 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 13.33333333333335900, 8.320721403598817300 ) ) ; +#24606 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24607 = ORIENTED_EDGE ( 'NONE', *, *, #58630, .T. ) ; +#24608 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 52.31032580521100100, -28.59353418718932400 ) ) ; +#24609 = EDGE_CURVE ( 'NONE', #39390, #31405, #49540, .T. ) ; +#24610 = CONICAL_SURFACE ( 'NONE', #69014, 10.00000000000009200, 0.7853981633974447300 ) ; +#24611 = ORIENTED_EDGE ( 'NONE', *, *, #63841, .T. ) ; +#24612 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#24613 = EDGE_CURVE ( 'NONE', #61971, #30596, #20565, .T. ) ; +#24614 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533315700, 41.79130857014967400, -28.37223374938523800 ) ) ; +#24615 = CARTESIAN_POINT ( 'NONE', ( -8.466819876342320600, 85.79999999999998300, -28.37307693585060900 ) ) ; +#24616 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#24617 = EDGE_CURVE ( 'NONE', #24198, #79804, #5805, .T. ) ; +#24618 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13820, #26062, #44754, #57317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353325962500E-007, 0.0007670609591621610100 ), + .UNSPECIFIED. ) ; +#24619 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429000, 26.42318720225498300, -28.70555803802994200 ) ) ; +#24620 = EDGE_CURVE ( 'NONE', #56579, #13600, #6100, .T. ) ; +#24621 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 44.83333333333334300, 0.9380355014189739600 ) ) ; +#24622 = AXIS2_PLACEMENT_3D ( 'NONE', #18071, #61615, #24332 ) ; +#24623 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 49.57141756547891700, -28.70555803802996700 ) ) ; +#24624 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 47.83333333333334300, -2.545304000185615800 ) ) ; +#24625 = EDGE_CURVE ( 'NONE', #37061, #14529, #72440, .T. ) ; +#24626 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 84.37738371066728900, -28.70555803802997700 ) ) ; +#24627 = ORIENTED_EDGE ( 'NONE', *, *, #1731, .F. ) ; +#24628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24629 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .T. ) ; +#24630 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686900, 20.67701665379241400, -28.20555803802994200 ) ) ; +#24631 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 80.90033558196088800, -28.70555803803014400 ) ) ; +#24632 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849333900, 9.820334718100429700, -28.30868034705247300 ) ) ; +#24633 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#24634 = EDGE_CURVE ( 'NONE', #9518, #18334, #66154, .T. ) ; +#24635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24636 = EDGE_CURVE ( 'NONE', #47573, #5802, #18448, .T. ) ; +#24637 = EDGE_CURVE ( 'NONE', #57451, #11971, #47603, .T. ) ; +#24638 = ORIENTED_EDGE ( 'NONE', *, *, #63264, .F. ) ; +#24639 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 21.97376207875059600, -28.70555803802995200 ) ) ; +#24640 = CIRCLE ( 'NONE', #2675, 10.00000000000009200 ) ; +#24641 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390331600, 81.46283204837320100, -28.48697406221674900 ) ) ; +#24642 = EDGE_LOOP ( 'NONE', ( #68646, #6865, #40563 ) ) ; +#24643 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 70.34267608797553400, -28.20555803803047800 ) ) ; +#24644 = CIRCLE ( 'NONE', #41458, 10.00000000000009400 ) ; +#24645 = ORIENTED_EDGE ( 'NONE', *, *, #72879, .T. ) ; +#24646 = AXIS2_PLACEMENT_3D ( 'NONE', #17778, #30050, #67542 ) ; +#24647 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#24648 = FACE_OUTER_BOUND ( 'NONE', #40558, .T. ) ; +#24649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24650 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76425, #70174, #26692, #1892 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549120749300E-007, 0.0008759529789573985900 ), + .UNSPECIFIED. ) ; +#24651 = VERTEX_POINT ( 'NONE', #52168 ) ; +#24652 = ORIENTED_EDGE ( 'NONE', *, *, #69148, .F. ) ; +#24653 = CARTESIAN_POINT ( 'NONE', ( -9.219797288041370100, 42.59027028261149200, -28.70555803803067400 ) ) ; +#24654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24655 = AXIS2_PLACEMENT_3D ( 'NONE', #14589, #58101, #20854 ) ; +#24656 = ORIENTED_EDGE ( 'NONE', *, *, #35383, .F. ) ; +#24657 = AXIS2_PLACEMENT_3D ( 'NONE', #33487, #77000, #39733 ) ; +#24658 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390331600, 81.46283204837320100, -28.48697406221674900 ) ) ; +#24659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24660 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769033300, 19.81139552890385100, -28.53900456328626600 ) ) ; +#24661 = CONICAL_SURFACE ( 'NONE', #4522, 10.50000000000009600, 0.7853981633974482800 ) ; +#24662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24663 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#24664 = ADVANCED_FACE ( 'NONE', ( #14549 ), #12603, .F. ) ; +#24665 = CONICAL_SURFACE ( 'NONE', #61662, 10.00000000000009400, 0.7853981633974447300 ) ; +#24666 = ORIENTED_EDGE ( 'NONE', *, *, #3134, .T. ) ; +#24667 = CONICAL_SURFACE ( 'NONE', #25368, 10.50000000000009600, 0.7853981633974500600 ) ; +#24668 = ORIENTED_EDGE ( 'NONE', *, *, #14975, .F. ) ; +#24669 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.90050506338821600, -28.70555803802997700 ) ) ; +#24670 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 54.16666666666666400, -4.152999154772358800 ) ) ; +#24671 = ORIENTED_EDGE ( 'NONE', *, *, #36580, .F. ) ; +#24672 = ORIENTED_EDGE ( 'NONE', *, *, #68243, .F. ) ; +#24673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24674 = ORIENTED_EDGE ( 'NONE', *, *, #49510, .F. ) ; +#24675 = ADVANCED_FACE ( 'NONE', ( #31108 ), #60302, .F. ) ; +#24676 = CIRCLE ( 'NONE', #2256, 10.00000000000009200 ) ; +#24677 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 19.33333333333333600, 1.294441961969997200 ) ) ; +#24678 = AXIS2_PLACEMENT_3D ( 'NONE', #71200, #33945, #77457 ) ; +#24679 = ORIENTED_EDGE ( 'NONE', *, *, #75592, .F. ) ; +#24680 = CARTESIAN_POINT ( 'NONE', ( 10.93544426077541800, 60.09037803491487800, -28.29483400905894900 ) ) ; +#24681 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#24682 = ORIENTED_EDGE ( 'NONE', *, *, #3514, .F. ) ; +#24683 = ORIENTED_EDGE ( 'NONE', *, *, #58458, .T. ) ; +#24684 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648400, 18.08087956867532900, -28.30223257055578800 ) ) ; +#24685 = ORIENTED_EDGE ( 'NONE', *, *, #56976, .T. ) ; +#24686 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 69.94924284854687400, -28.20555803802997700 ) ) ; +#24687 = EDGE_CURVE ( 'NONE', #28672, #49980, #57955, .T. ) ; +#24688 = CONICAL_SURFACE ( 'NONE', #9632, 10.50000000000009600, 0.7853981633974500600 ) ; +#24689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24690 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 21.66666666666667900, -10.73183747965883100 ) ) ; +#24691 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000160800, 68.62623792124919900, -28.70555803803030800 ) ) ; +#24692 = AXIS2_PLACEMENT_3D ( 'NONE', #31725, #25473, #12960 ) ; +#24693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24694 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855033600, 15.92318720225479800, -28.70555803802992800 ) ) ; +#24695 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#24696 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857150800, 47.42318720225497900, -28.70555803802996700 ) ) ; +#24698 = ADVANCED_FACE ( 'NONE', ( #29193 ), #40213, .T. ) ; +#24697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48107, #23679, #42394, #5158 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251555700, 0.003631405919786738000 ), + .UNSPECIFIED. ) ; +#24699 = CARTESIAN_POINT ( 'NONE', ( -15.16936139502963100, 25.90150809589759000, -28.70555803803001600 ) ) ; +#24700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24701 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#24702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24703 = CIRCLE ( 'NONE', #57584, 10.50000000000009600 ) ; +#24704 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 67.60073525436760600, -28.70555803803007700 ) ) ; +#24705 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 82.18315603019263400, -28.70555803803024400 ) ) ; +#24706 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#24707 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609218900, 14.68533208989798500, -28.53910738522638000 ) ) ; +#24708 = ORIENTED_EDGE ( 'NONE', *, *, #68338, .F. ) ; +#24709 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122143700, 39.57332680091207100, -28.37233769390155300 ) ) ; +#24710 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24711 = ORIENTED_EDGE ( 'NONE', *, *, #33223, .T. ) ; +#24712 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 31.46823913367203900, -28.70555803802996700 ) ) ; +#24713 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618500, 70.79999999999967000, -28.55171188418405800 ) ) ; +#24714 = CONICAL_SURFACE ( 'NONE', #46388, 10.00000000000009600, 0.7853981633974482800 ) ; +#24715 = ORIENTED_EDGE ( 'NONE', *, *, #65702, .T. ) ; +#24716 = CONICAL_SURFACE ( 'NONE', #16930, 10.00000000000009400, 0.7853981633974447300 ) ; +#24718 = EDGE_CURVE ( 'NONE', #66036, #73466, #76820, .T. ) ; +#24717 = ORIENTED_EDGE ( 'NONE', *, *, #42254, .T. ) ; +#24719 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 25.16666666666666800, 6.794441961969992500 ) ) ; +#24720 = CARTESIAN_POINT ( 'NONE', ( -16.62989890881926800, 29.48699567717054700, -28.57183973513139800 ) ) ; +#24721 = ORIENTED_EDGE ( 'NONE', *, *, #2756, .F. ) ; +#24722 = CIRCLE ( 'NONE', #80335, 10.00000000000009400 ) ; +#24723 = ORIENTED_EDGE ( 'NONE', *, *, #63977, .T. ) ; +#24724 = ORIENTED_EDGE ( 'NONE', *, *, #64382, .F. ) ; +#24725 = ORIENTED_EDGE ( 'NONE', *, *, #46080, .F. ) ; +#24726 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#24727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24728 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#24729 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488291200, 51.99560977511638500, -28.70555803803014400 ) ) ; +#24730 = CONICAL_SURFACE ( 'NONE', #6532, 10.50000000000009600, 0.7853981633974500600 ) ; +#24731 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24732 = ORIENTED_EDGE ( 'NONE', *, *, #70601, .T. ) ; +#24733 = CARTESIAN_POINT ( 'NONE', ( -17.26470821603527700, 38.81701335568625000, -28.44647976475484400 ) ) ; +#24734 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374511300, 19.04361721375068900, -28.44857805373787200 ) ) ; +#24735 = EDGE_CURVE ( 'NONE', #1022, #74017, #62244, .T. ) ; +#24736 = CONICAL_SURFACE ( 'NONE', #4972, 10.50000000000009600, 0.7853981633974500600 ) ; +#24737 = EDGE_CURVE ( 'NONE', #56745, #40378, #43473, .T. ) ; +#24738 = ORIENTED_EDGE ( 'NONE', *, *, #34773, .F. ) ; +#24739 = ORIENTED_EDGE ( 'NONE', *, *, #27638, .F. ) ; +#24740 = ORIENTED_EDGE ( 'NONE', *, *, #73368, .T. ) ; +#24741 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.16749699759768800, -28.20555803802995200 ) ) ; +#24742 = EDGE_LOOP ( 'NONE', ( #3655, #67553, #47482 ) ) ; +#24743 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #50245, #6750, #62808, #25556 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.546525377437116400, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999509106872246400, 0.9999509106872246400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#24744 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24745 = ORIENTED_EDGE ( 'NONE', *, *, #60014, .T. ) ; +#24746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24747 = CIRCLE ( 'NONE', #75199, 10.00000000000009400 ) ; +#24748 = AXIS2_PLACEMENT_3D ( 'NONE', #42903, #80188, #55419 ) ; +#24749 = VERTEX_POINT ( 'NONE', #21491 ) ; +#24750 = EDGE_CURVE ( 'NONE', #39296, #43749, #29095, .T. ) ; +#24751 = CARTESIAN_POINT ( 'NONE', ( -3.360598542614459100, 28.66749699759768800, -28.25434854811488300 ) ) ; +#24752 = EDGE_CURVE ( 'NONE', #48902, #28268, #33038, .T. ) ; +#24753 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 30.94069092601378300, -28.35186440610858200 ) ) ; +#24754 = EDGE_CURVE ( 'NONE', #18844, #80546, #78801, .T. ) ; +#24755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24756 = ADVANCED_FACE ( 'NONE', ( #45633 ), #25243, .F. ) ; +#24757 = ORIENTED_EDGE ( 'NONE', *, *, #28956, .T. ) ; +#24758 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60221, #53935, #28984, #22938 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610462200, 0.0004765929656968617400 ), + .UNSPECIFIED. ) ; +#24759 = AXIS2_PLACEMENT_3D ( 'NONE', #45735, #70520, #21043 ) ; +#24760 = ORIENTED_EDGE ( 'NONE', *, *, #6820, .F. ) ; +#24761 = CARTESIAN_POINT ( 'NONE', ( 17.41531457165529800, 60.41631403997881500, -28.40988208712492400 ) ) ; +#24762 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812500, 69.60439022488336000, -28.70555803802997700 ) ) ; +#24763 = ORIENTED_EDGE ( 'NONE', *, *, #16187, .T. ) ; +#24764 = CIRCLE ( 'NONE', #30975, 10.50000000000009600 ) ; +#24765 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.86203212531320600, -28.38801640354856200 ) ) ; +#24766 = ADVANCED_FACE ( 'NONE', ( #27206 ), #72937, .F. ) ; +#24767 = AXIS2_PLACEMENT_3D ( 'NONE', #54161, #4397, #16113 ) ; +#24768 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 68.83333333333334300, 0.1341879241256075400 ) ) ; +#24769 = AXIS2_PLACEMENT_3D ( 'NONE', #58696, #2923, #46416 ) ; +#24770 = AXIS2_PLACEMENT_3D ( 'NONE', #16070, #59599, #22326 ) ; +#24771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24772 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488097600, 79.60439022488301900, -28.70555803802997700 ) ) ; +#24773 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 33.83333333333334300, 0.9380355014189731800 ) ) ; +#24774 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#24775 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24776 = CONICAL_SURFACE ( 'NONE', #48588, 10.00000000000009400, 0.7853981633974447300 ) ; +#24777 = ADVANCED_FACE ( 'NONE', ( #58328 ), #39827, .F. ) ; +#24778 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#24779 = ADVANCED_FACE ( 'NONE', ( #8660 ), #13022, .T. ) ; +#24780 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, -0.9999999999999870100, -1.205558038030005300 ) ) ; +#24781 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24782 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091596000, 32.57425125164783000, -28.70555803803001300 ) ) ; +#24783 = ORIENTED_EDGE ( 'NONE', *, *, #16407, .T. ) ; +#24784 = AXIS2_PLACEMENT_3D ( 'NONE', #1737, #45237, #7990 ) ; +#24785 = EDGE_CURVE ( 'NONE', #1580, #28300, #14569, .T. ) ; +#24786 = ORIENTED_EDGE ( 'NONE', *, *, #52623, .F. ) ; +#24787 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.932503002402292200, -28.20555803802994200 ) ) ; +#24788 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.932503002402292200, -28.20555803802994200 ) ) ; +#24789 = ORIENTED_EDGE ( 'NONE', *, *, #79204, .F. ) ; +#24791 = ADVANCED_FACE ( 'NONE', ( #74883 ), #70962, .T. ) ; +#24790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2650, #8899, #64997, #27726 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820721436100E-007, 0.0005869288236378017500 ), + .UNSPECIFIED. ) ; +#24792 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#24793 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999994000, 15.70389005397341700, -28.37519436813226300 ) ) ; +#24794 = FACE_OUTER_BOUND ( 'NONE', #27087, .T. ) ; +#24795 = CONICAL_SURFACE ( 'NONE', #21588, 10.50000000000009600, 0.7853981633974518300 ) ; +#24796 = ORIENTED_EDGE ( 'NONE', *, *, #76307, .F. ) ; +#24797 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 90.16054007504432400, -28.34042301926905700 ) ) ; +#24799 = EDGE_CURVE ( 'NONE', #16181, #32387, #6728, .T. ) ; +#24798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7552, #63362, #57352, #20106 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259789648300E-007, 0.0004559721492009173200 ), + .UNSPECIFIED. ) ; +#24800 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372568800, 57.93535825203924400, -28.53896444442200000 ) ) ; +#24801 = CIRCLE ( 'NONE', #51578, 10.50000000000009600 ) ; +#24802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24803 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#24804 = CONICAL_SURFACE ( 'NONE', #54892, 10.50000000000009600, 0.7853981633974482800 ) ; +#24805 = AXIS2_PLACEMENT_3D ( 'NONE', #1670, #45157, #7924 ) ; +#24806 = CARTESIAN_POINT ( 'NONE', ( -15.16936139502962400, 36.40150809589757600, -28.70555803803001600 ) ) ; +#24807 = ORIENTED_EDGE ( 'NONE', *, *, #22374, .F. ) ; +#24808 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507562400, 49.07379779496243100, -28.70555803802996700 ) ) ; +#24809 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34385, #71655, #3357, #46859 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866729266700E-007, 0.001076778502991264800 ), + .UNSPECIFIED. ) ; +#24810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24812 = VERTEX_POINT ( 'NONE', #56515 ) ; +#24811 = CARTESIAN_POINT ( 'NONE', ( 8.239936510889833700E-014, 67.22261628933260600, -28.70555803802997700 ) ) ; +#24813 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534556900, 30.10079448659600100, -28.70555803802995200 ) ) ; +#24814 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 75.79999999999984100, -28.70525300642875200 ) ) ; +#24815 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24817 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#24818 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489670800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#24819 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #42139, #4887, #23687, #67189 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.689621061210106600, 4.517202198253183800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9437355211252735900, 0.9437355211252735900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#24820 = CIRCLE ( 'NONE', #36203, 10.00000000000009400 ) ; +#24821 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 30.39456479767167000, -28.70555803802995200 ) ) ; +#24822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24823 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512263400, 81.99560977511677600, -28.70555803802997700 ) ) ; +#24824 = ORIENTED_EDGE ( 'NONE', *, *, #30529, .F. ) ; +#24825 = AXIS2_PLACEMENT_3D ( 'NONE', #41938, #4677, #48164 ) ; +#24826 = CONICAL_SURFACE ( 'NONE', #26334, 10.00000000000009200, 0.7853981633974447300 ) ; +#24827 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533429300, 10.29130857014956900, -28.37223374938505000 ) ) ; +#24828 = ORIENTED_EDGE ( 'NONE', *, *, #38297, .F. ) ; +#24829 = ORIENTED_EDGE ( 'NONE', *, *, #74550, .F. ) ; +#24830 = EDGE_LOOP ( 'NONE', ( #34425, #18491, #16486, #21184 ) ) ; +#24831 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311228100, 85.80000000000262600, -28.70555803802997700 ) ) ; +#24832 = EDGE_LOOP ( 'NONE', ( #31530, #3198, #46560, #61243 ) ) ; +#24833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24834 = EDGE_LOOP ( 'NONE', ( #264, #57234, #61838 ) ) ; +#24835 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24836 = FACE_OUTER_BOUND ( 'NONE', #48019, .T. ) ; +#24837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24838 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463500, 70.22161678501181800, -28.29547179040443800 ) ) ; +#24839 = EDGE_LOOP ( 'NONE', ( #41654, #18848, #43568, #55016 ) ) ; +#24840 = ORIENTED_EDGE ( 'NONE', *, *, #49992, .F. ) ; +#24841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24842 = EDGE_LOOP ( 'NONE', ( #50821, #42244, #49541 ) ) ; +#24843 = EDGE_LOOP ( 'NONE', ( #3637, #7668, #50188, #4992 ) ) ; +#24844 = EDGE_CURVE ( 'NONE', #24293, #73953, #23283, .T. ) ; +#24845 = ORIENTED_EDGE ( 'NONE', *, *, #42812, .T. ) ; +#24846 = CONICAL_SURFACE ( 'NONE', #14758, 10.50000000000009600, 0.7853981633974500600 ) ; +#24847 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#24848 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 39.83333333333334300, 6.794441961969992500 ) ) ; +#24849 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42894, #18159, #55408, #24425 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674928190000E-007, 0.0007987728781052872700 ), + .UNSPECIFIED. ) ; +#24851 = CARTESIAN_POINT ( 'NONE', ( -2.680229948101011200, 10.47636006919875000, -28.38670679782149300 ) ) ; +#24852 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#24853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24854 = ADVANCED_FACE ( 'NONE', ( #10652 ), #4766, .T. ) ; +#24855 = EDGE_CURVE ( 'NONE', #3092, #24198, #96, .T. ) ; +#24856 = CIRCLE ( 'NONE', #40752, 10.00000000000009600 ) ; +#24857 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24858 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999991700, 28.13176086632792000, -28.70555803802994200 ) ) ; +#24859 = ORIENTED_EDGE ( 'NONE', *, *, #51344, .T. ) ; +#24860 = CIRCLE ( 'NONE', #29167, 10.00000000000009400 ) ; +#24861 = ADVANCED_FACE ( 'NONE', ( #56358 ), #52437, .T. ) ; +#24862 = EDGE_CURVE ( 'NONE', #55704, #11987, #66442, .T. ) ; +#24863 = EDGE_CURVE ( 'NONE', #31675, #66490, #51925, .T. ) ; +#24864 = ORIENTED_EDGE ( 'NONE', *, *, #22281, .F. ) ; +#24865 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650764600, 18.70543520232800100, -28.70555803803025800 ) ) ; +#24866 = CARTESIAN_POINT ( 'NONE', ( -10.93544426077498100, 90.09037803491503400, -28.29483400905890600 ) ) ; +#24867 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24869 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 11.16666666666666600, -12.20555803803000000 ) ) ; +#24870 = EDGE_CURVE ( 'NONE', #44558, #38688, #37855, .T. ) ; +#24871 = CONICAL_SURFACE ( 'NONE', #59919, 10.00000000000009400, 0.7853981633974447300 ) ; +#24872 = AXIS2_PLACEMENT_3D ( 'NONE', #14959, #52455, #39979 ) ; +#24873 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966700, 9.940690926013795400, -28.35186440610855000 ) ) ; +#24874 = FACE_OUTER_BOUND ( 'NONE', #8721, .T. ) ; +#24875 = ORIENTED_EDGE ( 'NONE', *, *, #40878, .F. ) ; +#24876 = ADVANCED_FACE ( 'NONE', ( #21353 ), #2814, .F. ) ; +#24877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24878 = CONICAL_SURFACE ( 'NONE', #39580, 10.00000000000009400, 0.7853981633974447300 ) ; +#24879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24880 = ORIENTED_EDGE ( 'NONE', *, *, #25975, .T. ) ; +#24881 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567154100, 20.24660241562189000, -28.20555803802994200 ) ) ; +#24882 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996100, 27.91684396980712500, -28.70555803802994200 ) ) ; +#24883 = EDGE_LOOP ( 'NONE', ( #30230, #38699, #73437 ) ) ; +#24884 = AXIS2_PLACEMENT_3D ( 'NONE', #10044, #28046, #47274 ) ; +#24885 = AXIS2_PLACEMENT_3D ( 'NONE', #75655, #57175, #19923 ) ; +#24886 = CONICAL_SURFACE ( 'NONE', #19646, 10.50000000000009600, 0.7853981633974482800 ) ; +#24887 = EDGE_CURVE ( 'NONE', #65996, #14786, #19379, .T. ) ; +#24888 = ADVANCED_FACE ( 'NONE', ( #35927 ), #33974, .T. ) ; +#24889 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#24892 = CONICAL_SURFACE ( 'NONE', #24189, 10.00000000000009200, 0.7853981633974447300 ) ; +#24891 = AXIS2_PLACEMENT_3D ( 'NONE', #34508, #78009, #40737 ) ; +#24890 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24893 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#24894 = VERTEX_POINT ( 'NONE', #14346 ) ; +#24895 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#24896 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 45.66666666666667900, 1.294441961969997200 ) ) ; +#24897 = ORIENTED_EDGE ( 'NONE', *, *, #79667, .F. ) ; +#24898 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24899 = ORIENTED_EDGE ( 'NONE', *, *, #17053, .F. ) ; +#24900 = EDGE_LOOP ( 'NONE', ( #74226, #63678, #72938 ) ) ; +#24901 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#24902 = ORIENTED_EDGE ( 'NONE', *, *, #20805, .T. ) ; +#24903 = CARTESIAN_POINT ( 'NONE', ( 4.454174134204599500, 94.27944769779057300, -28.35118195858181900 ) ) ; +#24904 = EDGE_CURVE ( 'NONE', #77798, #56537, #37473, .T. ) ; +#24905 = ADVANCED_FACE ( 'NONE', ( #67072 ), #864, .T. ) ; +#24906 = CIRCLE ( 'NONE', #33851, 10.50000000000009600 ) ; +#24907 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#24908 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24909 = AXIS2_PLACEMENT_3D ( 'NONE', #43386, #6140, #49621 ) ; +#24911 = VERTEX_POINT ( 'NONE', #45567 ) ; +#24910 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 63.65857157145704500, -28.20555803803014400 ) ) ; +#24912 = AXIS2_PLACEMENT_3D ( 'NONE', #70410, #14135, #14399 ) ; +#24913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24914 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 81.43383669612127600, -28.27375072930956200 ) ) ; +#24915 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#24916 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40063, #52557, #71353, #34089 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401245200, 0.004682530427071059800 ), + .UNSPECIFIED. ) ; +#24917 = CIRCLE ( 'NONE', #31571, 10.50000000000009600 ) ; +#24918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#24919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24920 = ORIENTED_EDGE ( 'NONE', *, *, #71437, .T. ) ; +#24921 = CIRCLE ( 'NONE', #69431, 10.50000000000009600 ) ; +#24922 = CARTESIAN_POINT ( 'NONE', ( -9.254657264815463700, 10.00380841767820600, -28.64142799534452200 ) ) ; +#24923 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567146500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#24924 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#24925 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24926 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#24927 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10284, #4015, #16543, #60077 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121410527800 ), + .UNSPECIFIED. ) ; +#24928 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561500, 55.79999999999999000, -28.70525300642875200 ) ) ; +#24929 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24931 = AXIS2_PLACEMENT_3D ( 'NONE', #7797, #57321, #51286 ) ; +#24932 = CONICAL_SURFACE ( 'NONE', #37053, 10.00000000000009200, 0.7853981633974447300 ) ; +#24933 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24934 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 52.00000000000000000, -1.205558038030002800 ) ) ; +#24935 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78985, #35468, #47920, #10706 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572368406300E-007, 0.0004669842289003297800 ), + .UNSPECIFIED. ) ; +#24936 = CIRCLE ( 'NONE', #4024, 10.50000000000009800 ) ; +#24937 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24938 = ORIENTED_EDGE ( 'NONE', *, *, #69275, .F. ) ; +#24939 = CIRCLE ( 'NONE', #60355, 10.50000000000009600 ) ; +#24940 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 17.16666666666667500, -2.545304000185620600 ) ) ; +#24941 = AXIS2_PLACEMENT_3D ( 'NONE', #22830, #53825, #29136 ) ; +#24942 = ORIENTED_EDGE ( 'NONE', *, *, #44883, .T. ) ; +#24943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53829, #10325, #47543, #60114 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247636199500, 0.0009605145132133929900 ), + .UNSPECIFIED. ) ; +#24944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24945 = EDGE_CURVE ( 'NONE', #66435, #70545, #23063, .T. ) ; +#24946 = CIRCLE ( 'NONE', #47845, 9.499999999999964500 ) ; +#24947 = FACE_OUTER_BOUND ( 'NONE', #20824, .T. ) ; +#24948 = VERTEX_POINT ( 'NONE', #51825 ) ; +#24949 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 57.94142842854307000, -28.20555803802997700 ) ) ; +#24950 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 19.50000000000000700, 6.847000845227646500 ) ) ; +#24951 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#24952 = ORIENTED_EDGE ( 'NONE', *, *, #69874, .T. ) ; +#24953 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027273800, 82.22511094383845900, -28.55192314908428100 ) ) ; +#24954 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#24955 = ORIENTED_EDGE ( 'NONE', *, *, #65273, .T. ) ; +#24956 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24957 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#24958 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24959 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310477800, 41.49769010897086500, -28.61774594594330900 ) ) ; +#24960 = FACE_OUTER_BOUND ( 'NONE', #48904, .T. ) ; +#24961 = ORIENTED_EDGE ( 'NONE', *, *, #32817, .T. ) ; +#24962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24963 = EDGE_CURVE ( 'NONE', #42984, #780, #41759, .T. ) ; +#24964 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274343100, 57.93535825203924400, -28.53896444442201400 ) ) ; +#24965 = ORIENTED_EDGE ( 'NONE', *, *, #23963, .T. ) ; +#24966 = ADVANCED_FACE ( 'NONE', ( #43694 ), #32031, .T. ) ; +#24967 = VERTEX_POINT ( 'NONE', #14879 ) ; +#24968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24969 = EDGE_CURVE ( 'NONE', #17037, #14786, #8558, .T. ) ; +#24970 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#24971 = ORIENTED_EDGE ( 'NONE', *, *, #72929, .F. ) ; +#24972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#24973 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534312300, 60.65007990305432600, -28.43638873268713500 ) ) ; +#24974 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844501000, 56.13383585008156000, -28.37247596307076200 ) ) ; +#24975 = ADVANCED_FACE ( 'NONE', ( #17437 ), #79717, .T. ) ; +#24976 = CONICAL_SURFACE ( 'NONE', #23476, 10.50000000000009600, 0.7853981633974500600 ) ; +#24977 = CIRCLE ( 'NONE', #20720, 9.500000000000101300 ) ; +#24978 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24979 = ORIENTED_EDGE ( 'NONE', *, *, #36507, .T. ) ; +#24980 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24981 = EDGE_CURVE ( 'NONE', #9809, #1277, #15489, .T. ) ; +#24982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44380, #903, #50656, #13458 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710604900, 0.0008082646680357285700 ), + .UNSPECIFIED. ) ; +#24983 = ADVANCED_FACE ( 'NONE', ( #69016 ), #30112, .T. ) ; +#24984 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24985 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24986 = EDGE_CURVE ( 'NONE', #54001, #33975, #74901, .T. ) ; +#24987 = VERTEX_POINT ( 'NONE', #52655 ) ; +#24988 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390824600, 23.91466791010178400, -28.53910738522650100 ) ) ; +#24989 = CIRCLE ( 'NONE', #15368, 10.00000000000009200 ) ; +#24990 = AXIS2_PLACEMENT_3D ( 'NONE', #57795, #20545, #64075 ) ; +#24991 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658406100, 18.15151454780944800, -28.67627428870427100 ) ) ; +#24992 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 23.00000000000000700, -9.205558038030005700 ) ) ; +#24993 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24994 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524700, 90.16054007504463600, -28.34042301926880800 ) ) ; +#24995 = EDGE_LOOP ( 'NONE', ( #16616, #69264, #49206, #16886 ) ) ; +#24996 = FACE_OUTER_BOUND ( 'NONE', #73132, .T. ) ; +#24997 = FACE_OUTER_BOUND ( 'NONE', #52037, .T. ) ; +#24998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25001 = AXIS2_PLACEMENT_3D ( 'NONE', #17995, #67774, #11754 ) ; +#25002 = CARTESIAN_POINT ( 'NONE', ( -15.05230528786076700, 65.75869881725290600, -28.70545453106903000 ) ) ; +#25003 = EDGE_CURVE ( 'NONE', #30155, #45954, #63187, .T. ) ; +#25005 = ORIENTED_EDGE ( 'NONE', *, *, #71074, .T. ) ; +#25004 = EDGE_CURVE ( 'NONE', #43398, #72596, #65149, .T. ) ; +#25006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25007 = EDGE_CURVE ( 'NONE', #70927, #27806, #46582, .T. ) ; +#25008 = AXIS2_PLACEMENT_3D ( 'NONE', #18343, #61877, #24604 ) ; +#25009 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007100, 49.84510448120794000, -28.37193179497696200 ) ) ; +#25010 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#25011 = AXIS2_PLACEMENT_3D ( 'NONE', #13492, #19457, #37926 ) ; +#25012 = FACE_OUTER_BOUND ( 'NONE', #56081, .T. ) ; +#25013 = ORIENTED_EDGE ( 'NONE', *, *, #70591, .T. ) ; +#25014 = ORIENTED_EDGE ( 'NONE', *, *, #73851, .F. ) ; +#25015 = AXIS2_PLACEMENT_3D ( 'NONE', #22422, #65948, #28721 ) ; +#25016 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153686800, 60.79999999999998300, -28.55171188418376400 ) ) ; +#25017 = ORIENTED_EDGE ( 'NONE', *, *, #50463, .F. ) ; +#25018 = EDGE_CURVE ( 'NONE', #59224, #75104, #60466, .T. ) ; +#25019 = ORIENTED_EDGE ( 'NONE', *, *, #64304, .T. ) ; +#25020 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#25021 = FACE_OUTER_BOUND ( 'NONE', #12005, .T. ) ; +#25022 = AXIS2_PLACEMENT_3D ( 'NONE', #3940, #47430, #10215 ) ; +#25023 = AXIS2_PLACEMENT_3D ( 'NONE', #29470, #41922, #79209 ) ; +#25024 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27227, #39704, #58484, #21240 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569961752800E-007, 0.0004053774948102088700 ), + .UNSPECIFIED. ) ; +#25025 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25026 = VERTEX_POINT ( 'NONE', #34459 ) ; +#25027 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105665700, 35.05000000000001100, -28.70555803802995200 ) ) ; +#25028 = FACE_OUTER_BOUND ( 'NONE', #34287, .T. ) ; +#25029 = FACE_OUTER_BOUND ( 'NONE', #38586, .T. ) ; +#25030 = ORIENTED_EDGE ( 'NONE', *, *, #19248, .F. ) ; +#25031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67811, #67541, #24558, #68075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217712248724300E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#25033 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#25034 = VERTEX_POINT ( 'NONE', #21943 ) ; +#25035 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 66.66666666666664300, -3.705558038030004400 ) ) ; +#25036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25038 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 31.66666666666667500, -5.205558038030003100 ) ) ; +#25039 = CIRCLE ( 'NONE', #64242, 10.50000000000009600 ) ; +#25040 = AXIS2_PLACEMENT_3D ( 'NONE', #12207, #55689, #18454 ) ; +#25041 = EDGE_LOOP ( 'NONE', ( #24897, #80235, #5849, #11655 ) ) ; +#25042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25043 = EDGE_LOOP ( 'NONE', ( #47957, #25320, #29985, #75999 ) ) ; +#25044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25046 = ORIENTED_EDGE ( 'NONE', *, *, #2835, .F. ) ; +#25047 = ORIENTED_EDGE ( 'NONE', *, *, #29740, .T. ) ; +#25048 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 69.00000000000000000, -1.205558038030002800 ) ) ; +#25049 = ORIENTED_EDGE ( 'NONE', *, *, #76305, .T. ) ; +#25050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25052 = FACE_OUTER_BOUND ( 'NONE', #17882, .T. ) ; +#25053 = AXIS2_PLACEMENT_3D ( 'NONE', #46916, #9692, #53194 ) ; +#25054 = EDGE_LOOP ( 'NONE', ( #5927, #14471, #49113 ) ) ; +#25055 = ORIENTED_EDGE ( 'NONE', *, *, #8478, .T. ) ; +#25056 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#25057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25058 = ADVANCED_FACE ( 'NONE', ( #50475 ), #11591, .F. ) ; +#25059 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25060 = EDGE_CURVE ( 'NONE', #42164, #66062, #28170, .T. ) ; +#25061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25062 = FACE_OUTER_BOUND ( 'NONE', #76033, .T. ) ; +#25063 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25064 = AXIS2_PLACEMENT_3D ( 'NONE', #2975, #21770, #65322 ) ; +#25065 = ORIENTED_EDGE ( 'NONE', *, *, #51113, .T. ) ; +#25066 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985400, 71.25732391202390700, -28.20555803802997700 ) ) ; +#25067 = EDGE_LOOP ( 'NONE', ( #56341, #27993, #45450 ) ) ; +#25068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25069 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25070 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25071 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25073 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148552400, 23.59761904761909800, -28.70555803802998800 ) ) ; +#25074 = CIRCLE ( 'NONE', #55304, 9.500000000000095900 ) ; +#25075 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25076 = ADVANCED_FACE ( 'NONE', ( #13548 ), #42693, .T. ) ; +#25077 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#25078 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542600, 50.49920551340399300, -28.70555803802996700 ) ) ; +#25079 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#25080 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312764400, 9.997690108970898500, -28.61774594593776700 ) ) ; +#25081 = ORIENTED_EDGE ( 'NONE', *, *, #8624, .F. ) ; +#25082 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32905, #70166, #2999, #46488 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584768400, 0.0006651184466334694900 ), + .UNSPECIFIED. ) ; +#25083 = CARTESIAN_POINT ( 'NONE', ( 11.56182508409043500, 9.983857102125075000, -28.57719681746159400 ) ) ; +#25084 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#25085 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#25086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25087 = EDGE_CURVE ( 'NONE', #62498, #78538, #45956, .T. ) ; +#25088 = CONICAL_SURFACE ( 'NONE', #38008, 10.00000000000009400, 0.7853981633974447300 ) ; +#25089 = ORIENTED_EDGE ( 'NONE', *, *, #61483, .F. ) ; +#25090 = EDGE_CURVE ( 'NONE', #34038, #77643, #31537, .T. ) ; +#25091 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042481200, 11.09027028261002800, -28.70555803802993500 ) ) ; +#25092 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.68929190448938000, -28.20555803802997700 ) ) ; +#25093 = FACE_OUTER_BOUND ( 'NONE', #47962, .T. ) ; +#25094 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408280200, 28.88586625357848100, -28.27331438134755400 ) ) ; +#25095 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 90.80000000000001100, -28.45034744217088700 ) ) ; +#25096 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019277900, 54.80000000000008200, -28.70555803802997700 ) ) ; +#25097 = EDGE_CURVE ( 'NONE', #62491, #46026, #17075, .T. ) ; +#25098 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 90.07141756547859800, -28.70555803803030800 ) ) ; +#25099 = ORIENTED_EDGE ( 'NONE', *, *, #3751, .T. ) ; +#25100 = ADVANCED_FACE ( 'NONE', ( #75797 ), #9625, .T. ) ; +#25101 = EDGE_CURVE ( 'NONE', #50861, #23115, #2566, .T. ) ; +#25102 = AXIS2_PLACEMENT_3D ( 'NONE', #40194, #21467, #71212 ) ; +#25103 = CIRCLE ( 'NONE', #73987, 10.00000000000009400 ) ; +#25104 = EDGE_LOOP ( 'NONE', ( #56733, #44831, #65184, #35932 ) ) ; +#25105 = EDGE_CURVE ( 'NONE', #65181, #51034, #68903, .T. ) ; +#25106 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#25107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64780, #21251, #33746, #77258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549585637823500E-007, 0.0002592578639938459100 ), + .UNSPECIFIED. ) ; +#25108 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 37.66666666666667100, -8.133761268305512700 ) ) ; +#25109 = EDGE_LOOP ( 'NONE', ( #66583, #21649, #73907, #80512 ) ) ; +#25110 = CARTESIAN_POINT ( 'NONE', ( -17.41542217839998900, 80.41624506589144500, -28.40985430318291100 ) ) ; +#25111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32350, #7576, #13874, #57376 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527065388100E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#25112 = AXIS2_PLACEMENT_3D ( 'NONE', #75131, #6856, #31634 ) ; +#25113 = EDGE_CURVE ( 'NONE', #22814, #39642, #54438, .T. ) ; +#25114 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541800, 90.58127875436078100, -28.53757464917570300 ) ) ; +#25115 = EDGE_CURVE ( 'NONE', #60581, #34228, #39991, .T. ) ; +#25116 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25117 = EDGE_CURVE ( 'NONE', #75725, #44247, #25561, .T. ) ; +#25118 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.43250300240229200, -28.20555803802997700 ) ) ; +#25119 = CIRCLE ( 'NONE', #5077, 10.00000000000009600 ) ; +#25120 = CIRCLE ( 'NONE', #52141, 10.00000000000009400 ) ; +#25121 = ORIENTED_EDGE ( 'NONE', *, *, #43040, .F. ) ; +#25122 = ORIENTED_EDGE ( 'NONE', *, *, #52733, .F. ) ; +#25123 = AXIS2_PLACEMENT_3D ( 'NONE', #32596, #7831, #38833 ) ; +#25124 = VERTEX_POINT ( 'NONE', #48258 ) ; +#25125 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428598300, 49.57141756547894600, -28.70555803802996700 ) ) ; +#25126 = VERTEX_POINT ( 'NONE', #11045 ) ; +#25127 = ORIENTED_EDGE ( 'NONE', *, *, #41289, .F. ) ; +#25128 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46748, #3241, #53018, #15782 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185305600E-007, 0.001119324643800063700 ), + .UNSPECIFIED. ) ; +#25129 = ORIENTED_EDGE ( 'NONE', *, *, #72532, .T. ) ; +#25130 = EDGE_CURVE ( 'NONE', #50525, #36182, #26199, .T. ) ; +#25131 = AXIS2_PLACEMENT_3D ( 'NONE', #73492, #36229, #79743 ) ; +#25132 = AXIS2_PLACEMENT_3D ( 'NONE', #56724, #75227, #13238 ) ; +#25133 = ORIENTED_EDGE ( 'NONE', *, *, #31127, .F. ) ; +#25134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25136 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25137 = CARTESIAN_POINT ( 'NONE', ( -15.88358847659816900, 30.94848545219208100, -28.67627428870333300 ) ) ; +#25138 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999957000, 71.62753447840813700, -28.38801640354866900 ) ) ; +#25139 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 9.000000000000003600, 9.794441961969996100 ) ) ; +#25140 = FACE_OUTER_BOUND ( 'NONE', #43058, .T. ) ; +#25142 = ORIENTED_EDGE ( 'NONE', *, *, #18770, .F. ) ; +#25141 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914525200, 59.77559325427176200, -28.45987523529584700 ) ) ; +#25143 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25144 = ORIENTED_EDGE ( 'NONE', *, *, #67885, .T. ) ; +#25145 = VERTEX_POINT ( 'NONE', #60830 ) ; +#25146 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#25147 = FACE_OUTER_BOUND ( 'NONE', #13300, .T. ) ; +#25148 = AXIS2_PLACEMENT_3D ( 'NONE', #80570, #43280, #6050 ) ; +#25149 = VERTEX_POINT ( 'NONE', #35546 ) ; +#25150 = ORIENTED_EDGE ( 'NONE', *, *, #50673, .F. ) ; +#25151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62332, #13, #12831, #56304 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720056548100E-007, 0.0002592600401781052900 ), + .UNSPECIFIED. ) ; +#25152 = ADVANCED_FACE ( 'NONE', ( #77753 ), #40755, .F. ) ; +#25153 = AXIS2_PLACEMENT_3D ( 'NONE', #36383, #79936, #42636 ) ; +#25154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25155 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 43.50000000000000700, -4.865812075874393000 ) ) ; +#25156 = CONICAL_SURFACE ( 'NONE', #42654, 10.00000000000009400, 0.7853981633974447300 ) ; +#25157 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25158 = VERTEX_POINT ( 'NONE', #42283 ) ; +#25159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25160 = EDGE_CURVE ( 'NONE', #31691, #13553, #11090, .T. ) ; +#25161 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25162 = AXIS2_PLACEMENT_3D ( 'NONE', #75430, #19395, #62942 ) ; +#25163 = ORIENTED_EDGE ( 'NONE', *, *, #32466, .T. ) ; +#25164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25165 = ORIENTED_EDGE ( 'NONE', *, *, #63419, .F. ) ; +#25166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25167 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567148300, 49.85339758437810100, -28.20555803802996700 ) ) ; +#25168 = ADVANCED_FACE ( 'NONE', ( #44610 ), #7643, .T. ) ; +#25169 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489603300, 49.65930907398613000, -28.35186440610855000 ) ) ; +#25170 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#25171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25176 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846314900, 70.79999999999998300, -28.55171188418376000 ) ) ; +#25177 = AXIS2_PLACEMENT_3D ( 'NONE', #65502, #53210, #70330 ) ; +#25178 = CONICAL_SURFACE ( 'NONE', #53600, 10.50000000000009600, 0.7853981633974500600 ) ; +#25179 = ADVANCED_FACE ( 'NONE', ( #48529 ), #55341, .F. ) ; +#25180 = ADVANCED_FACE ( 'NONE', ( #24228 ), #22273, .F. ) ; +#25181 = CIRCLE ( 'NONE', #39543, 10.00000000000009200 ) ; +#25182 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 89.77559325427182600, -28.45987523529581900 ) ) ; +#25183 = ORIENTED_EDGE ( 'NONE', *, *, #57034, .F. ) ; +#25184 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305486400, 59.70395328581638200, -28.70555803803001600 ) ) ; +#25185 = VERTEX_POINT ( 'NONE', #61377 ) ; +#25186 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725705700, 87.93535825203885300, -28.53896444442226600 ) ) ; +#25187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25188 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444651900, 71.87833896172689700, -28.53892303408236200 ) ) ; +#25189 = CARTESIAN_POINT ( 'NONE', ( -3.221157914412287000, 41.43523632220588100, -28.30315276798567200 ) ) ; +#25190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25191 = ADVANCED_FACE ( 'NONE', ( #73879 ), #69938, .T. ) ; +#25192 = LINE ( 'NONE', #45293, #70914 ) ; +#25193 = ORIENTED_EDGE ( 'NONE', *, *, #59425, .F. ) ; +#25194 = CIRCLE ( 'NONE', #23478, 10.50000000000009800 ) ; +#25195 = VERTEX_POINT ( 'NONE', #36572 ) ; +#25196 = ORIENTED_EDGE ( 'NONE', *, *, #14714, .T. ) ; +#25197 = EDGE_CURVE ( 'NONE', #49759, #59782, #77387, .T. ) ; +#25198 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 77.92318720225496500, -28.70555803802997700 ) ) ; +#25199 = ORIENTED_EDGE ( 'NONE', *, *, #46143, .T. ) ; +#25200 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 49.83333333333332900, 1.741883078712340300 ) ) ; +#25201 = CYLINDRICAL_SURFACE ( 'NONE', #62179, 10.00000000000000200 ) ; +#25202 = EDGE_CURVE ( 'NONE', #45524, #34401, #5724, .T. ) ; +#25203 = ORIENTED_EDGE ( 'NONE', *, *, #42670, .F. ) ; +#25204 = VERTEX_POINT ( 'NONE', #67868 ) ; +#25205 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79784, #23486, #48732, #11523 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401244300, 0.004682530427071087500 ), + .UNSPECIFIED. ) ; +#25206 = ORIENTED_EDGE ( 'NONE', *, *, #27135, .T. ) ; +#25208 = EDGE_LOOP ( 'NONE', ( #79937, #80543, #66748 ) ) ; +#25207 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#25209 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 15.00000000000001400, -1.205558038030002800 ) ) ; +#25210 = ORIENTED_EDGE ( 'NONE', *, *, #46276, .F. ) ; +#25211 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25212 = EDGE_CURVE ( 'NONE', #62433, #30974, #71930, .T. ) ; +#25213 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057900, 61.46283204837340700, -28.48697406221668200 ) ) ; +#25214 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 20.46868088498121800, -28.51286550264510200 ) ) ; +#25215 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146676500, 17.80869142985021000, -28.37223374938531300 ) ) ; +#25216 = ORIENTED_EDGE ( 'NONE', *, *, #40089, .F. ) ; +#25217 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 38.92298334620762300, -28.20555803802996700 ) ) ; +#25218 = CIRCLE ( 'NONE', #63112, 10.50000000000009600 ) ; +#25219 = ORIENTED_EDGE ( 'NONE', *, *, #71900, .T. ) ; +#25220 = EDGE_CURVE ( 'NONE', #5611, #13896, #62945, .T. ) ; +#25222 = EDGE_CURVE ( 'NONE', #76860, #5316, #48431, .T. ) ; +#25221 = EDGE_LOOP ( 'NONE', ( #71137, #34897, #45095 ) ) ; +#25223 = VERTEX_POINT ( 'NONE', #12113 ) ; +#25224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25225 = CARTESIAN_POINT ( 'NONE', ( 5.883745263583248800, 24.54999999999998300, -28.53994725305374700 ) ) ; +#25226 = VERTEX_POINT ( 'NONE', #43095 ) ; +#25227 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 17.33333333333333900, -6.705558038030005700 ) ) ; +#25228 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25229 = VERTEX_POINT ( 'NONE', #30883 ) ; +#25230 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567306400, 18.35339758437789800, -28.20555803803009500 ) ) ; +#25231 = FACE_OUTER_BOUND ( 'NONE', #58119, .T. ) ; +#25232 = AXIS2_PLACEMENT_3D ( 'NONE', #53836, #16594, #60119 ) ; +#25233 = EDGE_CURVE ( 'NONE', #25521, #15142, #59262, .T. ) ; +#25234 = EDGE_CURVE ( 'NONE', #2565, #58433, #53414, .T. ) ; +#25235 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25236 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#25237 = EDGE_CURVE ( 'NONE', #53604, #26728, #61246, .T. ) ; +#25239 = ORIENTED_EDGE ( 'NONE', *, *, #68834, .F. ) ; +#25238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25240 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25241 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#25242 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844493900, 85.79999999999985500, -28.20555803803014400 ) ) ; +#25243 = CONICAL_SURFACE ( 'NONE', #59859, 10.50000000000009200, 0.7853981633974482800 ) ; +#25244 = EDGE_LOOP ( 'NONE', ( #28556, #22565, #17399, #70264 ) ) ; +#25245 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 70.13716795162658000, -28.48697406221668500 ) ) ; +#25246 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 70.13716795162658000, -28.48697406221668500 ) ) ; +#25247 = ORIENTED_EDGE ( 'NONE', *, *, #4961, .F. ) ; +#25248 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052245600, 61.31766786975342900, -28.25051428653874200 ) ) ; +#25249 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040000, 71.43250300240211500, -28.20555803803014400 ) ) ; +#25250 = CARTESIAN_POINT ( 'NONE', ( -11.72016923584347500, 93.70089248718052500, -28.49656562070742900 ) ) ; +#25252 = ORIENTED_EDGE ( 'NONE', *, *, #39249, .F. ) ; +#25251 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25253 = AXIS2_PLACEMENT_3D ( 'NONE', #4297, #22534, #66323 ) ; +#25254 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841334100, 80.16349705304836000, -28.30782889147497600 ) ) ; +#25255 = AXIS2_PLACEMENT_3D ( 'NONE', #74626, #37067, #79 ) ; +#25256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25257 = AXIS2_PLACEMENT_3D ( 'NONE', #76028, #26294, #1493 ) ; +#25258 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66226, #22694, #35227, #78736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978777019100, 0.0006311001363622166600 ), + .UNSPECIFIED. ) ; +#25259 = ADVANCED_FACE ( 'NONE', ( #3752 ), #74664, .T. ) ; +#25260 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#25261 = CARTESIAN_POINT ( 'NONE', ( -15.08138858424540600, 9.959305707877293300, -28.70555803803001300 ) ) ; +#25262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25263 = FACE_OUTER_BOUND ( 'NONE', #50070, .T. ) ; +#25264 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 20.83333333333333200, 6.794441961969992500 ) ) ; +#25265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25266 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25267 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52067, #70864, #8817, #52336 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885671504353100E-007, 0.0007987728781049332800 ), + .UNSPECIFIED. ) ; +#25268 = CONICAL_SURFACE ( 'NONE', #6658, 10.00000000000009600, 0.7853981633974447300 ) ; +#25269 = VERTEX_POINT ( 'NONE', #18626 ) ; +#25270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14713, #51937, #20993, #64527 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278948733000, 0.001249956855170280900 ), + .UNSPECIFIED. ) ; +#25271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25272 = ADVANCED_FACE ( 'NONE', ( #34940 ), #66074, .T. ) ; +#25273 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252818300, 39.13131911501876200, -28.51286550264508100 ) ) ; +#25274 = AXIS2_PLACEMENT_3D ( 'NONE', #16589, #41587, #22831 ) ; +#25276 = VERTEX_POINT ( 'NONE', #31419 ) ; +#25275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25277 = EDGE_CURVE ( 'NONE', #74697, #49674, #1790, .T. ) ; +#25278 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25279 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#25280 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655694400, 38.92298334620754500, -28.20555803802996000 ) ) ; +#25281 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42572, #79877, #11607, #55096 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780735348100E-007, 0.0002745453538439268800 ), + .UNSPECIFIED. ) ; +#25282 = CIRCLE ( 'NONE', #26904, 10.00000000000009200 ) ; +#25283 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877845700, 30.52667319908792400, -28.37233769390154600 ) ) ; +#25284 = VERTEX_POINT ( 'NONE', #43868 ) ; +#25285 = CONICAL_SURFACE ( 'NONE', #7237, 10.00000000000009400, 0.7853981633974447300 ) ; +#25286 = ORIENTED_EDGE ( 'NONE', *, *, #58085, .T. ) ; +#25287 = CARTESIAN_POINT ( 'NONE', ( 17.40084336938107200, 89.90722698763544000, -28.41361853548544400 ) ) ; +#25288 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999958600, 81.78933626866476900, -28.53923937255202500 ) ) ; +#25289 = ORIENTED_EDGE ( 'NONE', *, *, #71927, .T. ) ; +#25290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25291 = ADVANCED_FACE ( 'NONE', ( #18369 ), #16432, .T. ) ; +#25292 = EDGE_CURVE ( 'NONE', #15552, #67117, #32954, .T. ) ; +#25293 = CIRCLE ( 'NONE', #54302, 10.50000000000009200 ) ; +#25294 = ORIENTED_EDGE ( 'NONE', *, *, #22835, .T. ) ; +#25295 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459462900, 82.51973550835637600, -28.70555803803011200 ) ) ; +#25296 = AXIS2_PLACEMENT_3D ( 'NONE', #47203, #28523, #53498 ) ; +#25297 = EDGE_LOOP ( 'NONE', ( #49961, #28391, #48689, #5615 ) ) ; +#25298 = ORIENTED_EDGE ( 'NONE', *, *, #1593, .T. ) ; +#25299 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25300 = ORIENTED_EDGE ( 'NONE', *, *, #77896, .F. ) ; +#25301 = ORIENTED_EDGE ( 'NONE', *, *, #17369, .T. ) ; +#25302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25303 = ORIENTED_EDGE ( 'NONE', *, *, #31408, .F. ) ; +#25304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25305 = ORIENTED_EDGE ( 'NONE', *, *, #63357, .T. ) ; +#25306 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25307 = ADVANCED_FACE ( 'NONE', ( #49466 ), #47519, .T. ) ; +#25308 = CIRCLE ( 'NONE', #38519, 10.00000000000009400 ) ; +#25309 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .T. ) ; +#25310 = EDGE_LOOP ( 'NONE', ( #43740, #5050, #68784 ) ) ; +#25311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25312 = EDGE_LOOP ( 'NONE', ( #68254, #66263, #6071 ) ) ; +#25313 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .F. ) ; +#25314 = EDGE_LOOP ( 'NONE', ( #68352, #41204, #66095, #80602 ) ) ; +#25315 = ORIENTED_EDGE ( 'NONE', *, *, #2564, .F. ) ; +#25316 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58632, #2578, #27653, #71140 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067880300 ), + .UNSPECIFIED. ) ; +#25317 = FACE_OUTER_BOUND ( 'NONE', #43817, .T. ) ; +#25318 = ADVANCED_FACE ( 'NONE', ( #51410 ), #14468, .T. ) ; +#25319 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 64.50000000000001400, 2.454695999814380200 ) ) ; +#25320 = ORIENTED_EDGE ( 'NONE', *, *, #55353, .F. ) ; +#25321 = AXIS2_PLACEMENT_3D ( 'NONE', #16826, #54331, #29631 ) ; +#25322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79294, #47975, #4748, #48240 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388488191000E-007, 0.0007987676590766394300 ), + .UNSPECIFIED. ) ; +#25324 = EDGE_LOOP ( 'NONE', ( #22153, #37045, #46070, #72148, #61407 ) ) ; +#25325 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#25326 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 29.50000000000002100, 4.650848422521012700 ) ) ; +#25327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25328 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142900, 20.46868088498122200, -28.51286550264510900 ) ) ; +#25329 = EDGE_CURVE ( 'NONE', #13553, #42646, #34004, .T. ) ; +#25330 = FACE_OUTER_BOUND ( 'NONE', #26973, .T. ) ; +#25331 = ORIENTED_EDGE ( 'NONE', *, *, #912, .T. ) ; +#25332 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25333 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 66.83333333333334300, -4.152999154772353500 ) ) ; +#25334 = EDGE_LOOP ( 'NONE', ( #61793, #49595, #17176 ) ) ; +#25335 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25336 = CARTESIAN_POINT ( 'NONE', ( -3.778746597914905100, 28.66476742015635900, -28.30311934730016100 ) ) ; +#25337 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ; +#25338 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195931300, 63.65857157145700300, -28.37229765499282100 ) ) ; +#25339 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 46.72261628933269200, -28.70555803802996700 ) ) ; +#25340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25341 = CARTESIAN_POINT ( 'NONE', ( 5.429788129982537500E-015, 33.63556610137278100, -28.54207364681940700 ) ) ; +#25342 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.16749699759768800, -28.20555803802997700 ) ) ; +#25343 = EDGE_CURVE ( 'NONE', #36405, #6075, #64134, .T. ) ; +#25345 = EDGE_CURVE ( 'NONE', #79210, #63300, #19554, .T. ) ; +#25344 = FACE_OUTER_BOUND ( 'NONE', #37693, .T. ) ; +#25346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25347 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#25348 = EDGE_LOOP ( 'NONE', ( #57844, #52483, #41742, #65293 ) ) ; +#25349 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25350 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040913800, 22.65857157145701400, -28.37229765499282100 ) ) ; +#25351 = ORIENTED_EDGE ( 'NONE', *, *, #15114, .T. ) ; +#25352 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25353 = CARTESIAN_POINT ( 'NONE', ( -11.74534273518457000, 41.50380841767820800, -28.64142799534457500 ) ) ; +#25354 = CARTESIAN_POINT ( 'NONE', ( 10.37150777124400000, 51.43250300240213600, -28.25053031809475000 ) ) ; +#25355 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25356 = AXIS2_PLACEMENT_3D ( 'NONE', #63426, #26166, #69639 ) ; +#25357 = EDGE_CURVE ( 'NONE', #62053, #24597, #20318, .T. ) ; +#25358 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086481400, 39.47187418724321600, -28.37194250757536200 ) ) ; +#25359 = EDGE_CURVE ( 'NONE', #36626, #44806, #36840, .T. ) ; +#25360 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25362 = FACE_OUTER_BOUND ( 'NONE', #25041, .T. ) ; +#25364 = VERTEX_POINT ( 'NONE', #1183 ) ; +#25363 = EDGE_CURVE ( 'NONE', #71934, #6862, #68007, .T. ) ; +#25365 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#25366 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507583200, 38.57379779496243800, -28.70555803802995200 ) ) ; +#25367 = ORIENTED_EDGE ( 'NONE', *, *, #4538, .F. ) ; +#25368 = AXIS2_PLACEMENT_3D ( 'NONE', #18893, #6391, #25157 ) ; +#25369 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#25370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25371 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#25373 = ORIENTED_EDGE ( 'NONE', *, *, #67526, .F. ) ; +#25372 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10512, #4240, #60035 ), + ( #16760, #60303, #23025 ), + ( #66537, #29325, #72798 ), + ( #35552, #79062, #41760 ), + ( #4510, #47994, #10780 ), + ( #54278, #17043, #60562 ), + ( #23284, #66806, #29573 ), + ( #73073, #35796, #79321 ), + ( #42024, #4767, #48265 ), + ( #11053, #54552, #17293 ), + ( #60837, #23553, #67073 ), + ( #29854, #73333, #36068 ), + ( #79586, #42290, #5042 ), + ( #48530, #11325, #54807 ), + ( #17581, #61103, #23840 ), + ( #67335, #30113, #73598 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.467669261292016400, 6.652153215404445600, 6.836637169516874800, 7.021121123629305000, 7.205605077741735100, 7.390089031854164300, 7.759056940079023700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070791747819835700, 1.000000000000000000), + ( 1.000000000000000000, 0.7111929068709388300, 1.000000000000000000), + ( 1.000000000000000000, 0.7266179049923230400, 1.000000000000000000), + ( 1.000000000000000000, 0.7379288426924333100, 1.000000000000000000), + ( 1.000000000000000000, 0.7654477440270048800, 1.000000000000000000), + ( 1.000000000000000000, 0.7816266199753283400, 1.000000000000000000), + ( 1.000000000000000000, 0.8160489695658583700, 1.000000000000000000), + ( 1.000000000000000000, 0.8342769553576454600, 1.000000000000000000), + ( 1.000000000000000000, 0.8701929910408183800, 1.000000000000000000), + ( 1.000000000000000000, 0.8878763461558139000, 1.000000000000000000), + ( 1.000000000000000000, 0.9206108609225768200, 1.000000000000000000), + ( 1.000000000000000000, 0.9356619584782149800, 1.000000000000000000), + ( 1.000000000000000000, 0.9745709972571388000, 1.000000000000000000), + ( 1.000000000000000000, 0.9920621202393488100, 1.000000000000000000), + ( 1.000000000000000000, 0.9977515558036768000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#25374 = CONICAL_SURFACE ( 'NONE', #54774, 10.00000000000009400, 0.7853981633974447300 ) ; +#25375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25376 = ORIENTED_EDGE ( 'NONE', *, *, #79929, .F. ) ; +#25378 = EDGE_LOOP ( 'NONE', ( #34267, #18333, #64029, #37520 ) ) ; +#25377 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#25379 = ORIENTED_EDGE ( 'NONE', *, *, #46494, .F. ) ; +#25380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32175, #19939, #69690, #32430 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526892981400E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#25381 = ORIENTED_EDGE ( 'NONE', *, *, #43305, .T. ) ; +#25382 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 101.5999999999999900, 13.79444196196997700 ) ) ; +#25383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25384 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199500, 60.34267608797601000, -28.20555803802997700 ) ) ; +#25385 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 9.932503002402292200, -28.20555803802994200 ) ) ; +#25386 = AXIS2_PLACEMENT_3D ( 'NONE', #16748, #79054, #41496 ) ; +#25387 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042469700, 42.59027028261004200, -28.70555803802997400 ) ) ; +#25388 = CARTESIAN_POINT ( 'NONE', ( 12.88374526358325400, 45.54999999999998300, -28.53994725305377500 ) ) ; +#25389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17767, #61301, #67525, #30294 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917670307500E-007, 0.0004089036991175742300 ), + .UNSPECIFIED. ) ; +#25390 = EDGE_LOOP ( 'NONE', ( #3639, #14440, #48807, #3880 ) ) ; +#25391 = FACE_OUTER_BOUND ( 'NONE', #30114, .T. ) ; +#25392 = ORIENTED_EDGE ( 'NONE', *, *, #8757, .F. ) ; +#25393 = EDGE_LOOP ( 'NONE', ( #22932, #52406, #78030, #3230 ) ) ; +#25394 = ORIENTED_EDGE ( 'NONE', *, *, #20119, .T. ) ; +#25395 = ADVANCED_FACE ( 'NONE', ( #31026 ), #57227, .T. ) ; +#25396 = VERTEX_POINT ( 'NONE', #7695 ) ; +#25397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25398 = ORIENTED_EDGE ( 'NONE', *, *, #9359, .T. ) ; +#25399 = ORIENTED_EDGE ( 'NONE', *, *, #10077, .T. ) ; +#25400 = ADVANCED_FACE ( 'NONE', ( #62161 ), #60227, .T. ) ; +#25401 = CONICAL_SURFACE ( 'NONE', #15986, 10.50000000000009800, 0.7853981633974518300 ) ; +#25402 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 35.50000000000000700, 4.650848422521016300 ) ) ; +#25403 = AXIS2_PLACEMENT_3D ( 'NONE', #52780, #59044, #21807 ) ; +#25404 = EDGE_LOOP ( 'NONE', ( #80555, #54094, #63322 ) ) ; +#25405 = EDGE_CURVE ( 'NONE', #76501, #74152, #76731, .T. ) ; +#25406 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30165, #67387, #42614, #5373 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885673928396800E-007, 0.0007987728781051964100 ), + .UNSPECIFIED. ) ; +#25407 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857280700, 47.42318720225497900, -28.70555803802996700 ) ) ; +#25408 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819000, 28.63131911501876900, -28.51286550264507700 ) ) ; +#25409 = ADVANCED_FACE ( 'NONE', ( #80646 ), #10570, .F. ) ; +#25410 = FACE_OUTER_BOUND ( 'NONE', #21538, .T. ) ; +#25412 = VERTEX_POINT ( 'NONE', #20504 ) ; +#25411 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 30.57757630314203100, -28.53861367218592800 ) ) ; +#25413 = EDGE_CURVE ( 'NONE', #59803, #24651, #27124, .T. ) ; +#25414 = AXIS2_PLACEMENT_3D ( 'NONE', #20918, #27182, #58162 ) ; +#25415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25416 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#25417 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62275, #55998, #12511, #68531 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464040500, 0.001179659862024346400 ), + .UNSPECIFIED. ) ; +#25418 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 79.77559325427182600, -28.45987523529581900 ) ) ; +#25419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25420 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.43250300240228500, -28.20555803802997700 ) ) ; +#25421 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#25422 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 6.833333333333335700, -12.20555803803000600 ) ) ; +#25423 = AXIS2_PLACEMENT_3D ( 'NONE', #65415, #28160, #71644 ) ; +#25424 = CARTESIAN_POINT ( 'NONE', ( 12.21669353480403300, 80.79999999999968500, -28.32841359973473400 ) ) ; +#25425 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045800, 90.36203212531218300, -28.38801640354843400 ) ) ; +#25426 = ORIENTED_EDGE ( 'NONE', *, *, #4358, .T. ) ; +#25427 = EDGE_LOOP ( 'NONE', ( #17937, #41569, #67591, #6095 ) ) ; +#25428 = CARTESIAN_POINT ( 'NONE', ( 16.61203742462656800, 6.773604590615066800, -28.17537332654945500 ) ) ; +#25429 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25430 = EDGE_LOOP ( 'NONE', ( #10835, #22055, #24668 ) ) ; +#25431 = AXIS2_PLACEMENT_3D ( 'NONE', #71628, #21853, #46836 ) ; +#25432 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 9.968680884981223400, -28.51286550264509100 ) ) ; +#25433 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195751800, 17.00972971738994800, -28.70555803802993100 ) ) ; +#25434 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 15.94142842854248700, -28.20555803803042500 ) ) ; +#25435 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 87.94142842854303400, -28.20555803803030800 ) ) ; +#25436 = CONICAL_SURFACE ( 'NONE', #41894, 10.50000000000009600, 0.7853981633974500600 ) ; +#25437 = ORIENTED_EDGE ( 'NONE', *, *, #5273, .F. ) ; +#25438 = EDGE_LOOP ( 'NONE', ( #39393, #16603, #78836 ) ) ; +#25439 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 41.33333333333335000, 3.124568980892187500 ) ) ; +#25440 = CARTESIAN_POINT ( 'NONE', ( 5.294162141782189600, 45.54999999999999700, -28.37136602294610600 ) ) ; +#25441 = CARTESIAN_POINT ( 'NONE', ( 5.030698080332740600E-014, 72.97376207875062400, -28.70555803802997700 ) ) ; +#25442 = CIRCLE ( 'NONE', #30279, 10.50000000000009600 ) ; +#25443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25444 = ORIENTED_EDGE ( 'NONE', *, *, #62044, .F. ) ; +#25445 = ORIENTED_EDGE ( 'NONE', *, *, #14478, .T. ) ; +#25446 = ORIENTED_EDGE ( 'NONE', *, *, #42692, .F. ) ; +#25447 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 90.69966441803890700, -28.70555803802997700 ) ) ; +#25448 = EDGE_LOOP ( 'NONE', ( #13174, #7680, #12754, #35531 ) ) ; +#25449 = CARTESIAN_POINT ( 'NONE', ( 24.75762924915960300, 96.47881462457959900, -20.96673806103189700 ) ) ; +#25450 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.43250300240195800, -28.20555803803030800 ) ) ; +#25451 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103300, 89.94924284854707300, -28.20555803802997700 ) ) ; +#25452 = ORIENTED_EDGE ( 'NONE', *, *, #42594, .F. ) ; +#25453 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#25454 = CARTESIAN_POINT ( 'NONE', ( 11.57873323051878400, 92.13234779781917900, -28.70555803803000200 ) ) ; +#25455 = FACE_OUTER_BOUND ( 'NONE', #17514, .T. ) ; +#25456 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#25457 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804424900, 67.94142842854303400, -28.37229765499311200 ) ) ; +#25458 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818077900, 79.94924284854685900, -28.20555803802997700 ) ) ; +#25459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25460 = CIRCLE ( 'NONE', #72895, 9.500000000000097700 ) ; +#25461 = VERTEX_POINT ( 'NONE', #33005 ) ; +#25462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25463 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25464 = ORIENTED_EDGE ( 'NONE', *, *, #45324, .T. ) ; +#25465 = EDGE_CURVE ( 'NONE', #59395, #12957, #5082, .T. ) ; +#25466 = ORIENTED_EDGE ( 'NONE', *, *, #23790, .T. ) ; +#25467 = EDGE_LOOP ( 'NONE', ( #73137, #7782, #33887, #28609 ) ) ; +#25468 = ORIENTED_EDGE ( 'NONE', *, *, #32489, .F. ) ; +#25469 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541606700, 29.08874248361071600, -28.53740755999534400 ) ) ; +#25470 = ORIENTED_EDGE ( 'NONE', *, *, #49952, .T. ) ; +#25471 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#25472 = CIRCLE ( 'NONE', #45601, 10.50000000000009600 ) ; +#25473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25474 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997800, 50.90050506338822300, -28.70555803802997700 ) ) ; +#25475 = EDGE_CURVE ( 'NONE', #59807, #31448, #43619, .T. ) ; +#25476 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 61.43250300240229200, -28.23966044827355000 ) ) ; +#25477 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.68929190448937300, -28.20555803802997700 ) ) ; +#25478 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890733900, 20.12856921007284000, -28.37063977681166400 ) ) ; +#25479 = ADVANCED_FACE ( 'NONE', ( #29117 ), #25156, .T. ) ; +#25480 = EDGE_CURVE ( 'NONE', #39588, #45798, #71397, .T. ) ; +#25481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58454, #14938, #64750, #27470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476258231785600E-007, 0.0002670039420925205600 ), + .UNSPECIFIED. ) ; +#25482 = AXIS2_PLACEMENT_3D ( 'NONE', #73722, #42683, #30231 ) ; +#25483 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#25484 = CIRCLE ( 'NONE', #40405, 10.50000000000009600 ) ; +#25485 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 47.66666666666667100, -6.705558038030000400 ) ) ; +#25486 = VERTEX_POINT ( 'NONE', #64583 ) ; +#25487 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466620100, 18.83106028708544600, -28.57333386111662700 ) ) ; +#25488 = ADVANCED_FACE ( 'NONE', ( #45556 ), #72859, .T. ) ; +#25489 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 12.83333333333334100, 0.1341879241256075400 ) ) ; +#25490 = AXIS2_PLACEMENT_3D ( 'NONE', #65670, #28430, #71917 ) ; +#25491 = CARTESIAN_POINT ( 'NONE', ( -10.04026895850642000, 20.37561462481247400, -28.30309985153374800 ) ) ; +#25492 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39187, #76467, #45418, #8176 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625869797168000E-007, 0.0002930369617396982300 ), + .UNSPECIFIED. ) ; +#25493 = CARTESIAN_POINT ( 'NONE', ( -16.44668611327810100, 81.48387403443059900, -28.57421789838263800 ) ) ; +#25494 = EDGE_CURVE ( 'NONE', #77464, #56250, #56943, .T. ) ; +#25495 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473003000, 90.01262610361132500, -28.29936525552463100 ) ) ; +#25496 = EDGE_CURVE ( 'NONE', #17997, #35663, #8584, .T. ) ; +#25497 = AXIS2_PLACEMENT_3D ( 'NONE', #21510, #65022, #27762 ) ; +#25498 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844084400, 30.79362734601329200, -28.24165217761327900 ) ) ; +#25499 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492471800, 31.52620220503759500, -28.70555803802995200 ) ) ; +#25500 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25501 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 15.16666666666667500, 1.741883078712356500 ) ) ; +#25502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76417, #14163, #8127, #51641 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978315000E-007, 0.001076778502991511700 ), + .UNSPECIFIED. ) ; +#25503 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#25504 = EDGE_LOOP ( 'NONE', ( #51798, #19947, #21992 ) ) ; +#25505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25506 = ORIENTED_EDGE ( 'NONE', *, *, #48811, .F. ) ; +#25507 = EDGE_CURVE ( 'NONE', #28056, #18676, #42452, .T. ) ; +#25508 = AXIS2_PLACEMENT_3D ( 'NONE', #63343, #75812, #19803 ) ; +#25509 = AXIS2_PLACEMENT_3D ( 'NONE', #70884, #33628, #27397 ) ; +#25510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25511 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4757, #35782, #42010, #48251 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122928014600, 0.0007303749718165120300 ), + .UNSPECIFIED. ) ; +#25512 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#25513 = ADVANCED_FACE ( 'NONE', ( #58243 ), #23217, .F. ) ; +#25514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25515 = CARTESIAN_POINT ( 'NONE', ( 5.216693534804068800, 70.79999999999984100, -28.32841359973456000 ) ) ; +#25516 = CONICAL_SURFACE ( 'NONE', #34046, 10.50000000000009600, 0.7853981633974500600 ) ; +#25517 = ORIENTED_EDGE ( 'NONE', *, *, #37085, .F. ) ; +#25518 = VERTEX_POINT ( 'NONE', #58823 ) ; +#25519 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034451500, 10.17701665379219700, -28.20555803802993500 ) ) ; +#25520 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25521 = VERTEX_POINT ( 'NONE', #21594 ) ; +#25522 = FACE_OUTER_BOUND ( 'NONE', #33944, .T. ) ; +#25523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25524 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .T. ) ; +#25525 = AXIS2_PLACEMENT_3D ( 'NONE', #51455, #70252, #33001 ) ; +#25526 = CARTESIAN_POINT ( 'NONE', ( 3.729655473350135300E-014, 82.97376207875062400, -28.70555803802997700 ) ) ; +#25527 = ORIENTED_EDGE ( 'NONE', *, *, #7033, .F. ) ; +#25528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25529 = ORIENTED_EDGE ( 'NONE', *, *, #72192, .T. ) ; +#25530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25531 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 90.16749699759768100, -28.20555803802997700 ) ) ; +#25532 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489640200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#25533 = ORIENTED_EDGE ( 'NONE', *, *, #10776, .T. ) ; +#25534 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 30.93650294695131500, -28.30782889147481600 ) ) ; +#25535 = ORIENTED_EDGE ( 'NONE', *, *, #45220, .T. ) ; +#25536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25537 = FACE_OUTER_BOUND ( 'NONE', #35759, .T. ) ; +#25538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25539 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898059300, 30.71894733120736000, -28.33409528117009300 ) ) ; +#25541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25542 = VERTEX_POINT ( 'NONE', #65117 ) ; +#25543 = AXIS2_PLACEMENT_3D ( 'NONE', #5397, #48872, #11672 ) ; +#25544 = FACE_OUTER_BOUND ( 'NONE', #26899, .T. ) ; +#25545 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666600, 81.46283204837337200, -28.48697406221659300 ) ) ; +#25546 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 18.66666666666667900, -8.133761268305512700 ) ) ; +#25547 = ORIENTED_EDGE ( 'NONE', *, *, #68259, .F. ) ; +#25548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#25549 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#25550 = ORIENTED_EDGE ( 'NONE', *, *, #21320, .F. ) ; +#25551 = ORIENTED_EDGE ( 'NONE', *, *, #11649, .F. ) ; +#25552 = ORIENTED_EDGE ( 'NONE', *, *, #75344, .F. ) ; +#25553 = FACE_OUTER_BOUND ( 'NONE', #38953, .T. ) ; +#25554 = ORIENTED_EDGE ( 'NONE', *, *, #14971, .T. ) ; +#25555 = FACE_OUTER_BOUND ( 'NONE', #5381, .T. ) ; +#25556 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#25557 = AXIS2_PLACEMENT_3D ( 'NONE', #309, #43805, #6572 ) ; +#25558 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 77.94142842854297700, -28.20555803802997700 ) ) ; +#25559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25561 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54002, #10504, #47988, #10771, #54268, #17036, #60555, #23279, #66797, #29568, #73064, #35789, #79313, #42017 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3.469446951953614200E-018, 0.001621704974719068800, 0.003243409949438134100, 0.004865114924157198900, 0.005675967411516737900, 0.006081393655196504700, 0.006486819898876271600 ), + .UNSPECIFIED. ) ; +#25562 = EDGE_CURVE ( 'NONE', #41849, #11933, #28061, .T. ) ; +#25563 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25564 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820130200, 18.08258585630860800, -28.27509349209147500 ) ) ; +#25565 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25566 = AXIS2_PLACEMENT_3D ( 'NONE', #45478, #8235, #51735 ) ; +#25567 = FACE_OUTER_BOUND ( 'NONE', #5394, .T. ) ; +#25568 = VERTEX_POINT ( 'NONE', #52549 ) ; +#25569 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 4.999999999999997300, 13.79444196196997700 ) ) ; +#25570 = CARTESIAN_POINT ( 'NONE', ( -9.093266739737496000, 24.54999999999862600, -28.70555803802994200 ) ) ; +#25571 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826527900, 10.14948861668600200, -28.33414295261580700 ) ) ; +#25572 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762400, 10.52620220503713000, -28.70555803802992800 ) ) ; +#25573 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25574 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 90.34267608797600200, -28.20555803802997700 ) ) ; +#25575 = ADVANCED_FACE ( 'NONE', ( #56277 ), #70885, .T. ) ; +#25576 = EDGE_CURVE ( 'NONE', #62131, #2597, #13583, .T. ) ; +#25577 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 80.51916201875612000, -28.45106778992441600 ) ) ; +#25578 = EDGE_CURVE ( 'NONE', #40334, #46932, #6647, .T. ) ; +#25579 = ORIENTED_EDGE ( 'NONE', *, *, #29436, .T. ) ; +#25580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25581 = ORIENTED_EDGE ( 'NONE', *, *, #76188, .T. ) ; +#25582 = ADVANCED_FACE ( 'NONE', ( #41689 ), #21269, .F. ) ; +#25583 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 62.33333333333335000, -5.535685056952199400 ) ) ; +#25584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25585 = EDGE_CURVE ( 'NONE', #75015, #75678, #37775, .T. ) ; +#25586 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965577100, 10.17701665379167200, -28.20555803803009500 ) ) ; +#25587 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 27.33333333333335300, -8.133761268305512700 ) ) ; +#25588 = EDGE_CURVE ( 'NONE', #55826, #41201, #79891, .T. ) ; +#25589 = FACE_OUTER_BOUND ( 'NONE', #43905, .T. ) ; +#25590 = ORIENTED_EDGE ( 'NONE', *, *, #33169, .T. ) ; +#25591 = AXIS2_PLACEMENT_3D ( 'NONE', #68367, #18603, #24857 ) ; +#25592 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25593 = LINE ( 'NONE', #67531, #58655 ) ; +#25594 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368700, 70.79999999999998300, -28.55171188418375600 ) ) ; +#25595 = ORIENTED_EDGE ( 'NONE', *, *, #46508, .F. ) ; +#25596 = ADVANCED_FACE ( 'NONE', ( #39742 ), #52359, .T. ) ; +#25597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25598 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188000700, 18.53085164125271300, -28.45573375118225800 ) ) ; +#25599 = ADVANCED_FACE ( 'NONE', ( #78729 ), #19298, .F. ) ; +#25600 = CIRCLE ( 'NONE', #55894, 10.00000000000009400 ) ; +#25601 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 64.66666666666667100, 4.294441961969993400 ) ) ; +#25602 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39712, #76983, #52191, #14967, #58490, #21248, #64774, #27506 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 4.590302527918133000E-016, 0.002282923683054463300, 0.003424385524581464900, 0.004565847366108464300 ), + .UNSPECIFIED. ) ; +#25603 = EDGE_LOOP ( 'NONE', ( #3537, #24511, #8553 ) ) ; +#25604 = ORIENTED_EDGE ( 'NONE', *, *, #32733, .T. ) ; +#25605 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25606 = FACE_OUTER_BOUND ( 'NONE', #12882, .T. ) ; +#25607 = EDGE_CURVE ( 'NONE', #36688, #33176, #65458, .T. ) ; +#25608 = EDGE_CURVE ( 'NONE', #75300, #39034, #54332, .T. ) ; +#25609 = EDGE_CURVE ( 'NONE', #63824, #74545, #74802, .T. ) ; +#25610 = ADVANCED_FACE ( 'NONE', ( #12528 ), #33893, .T. ) ; +#25611 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 51.46283204837339300, -28.48697406221667100 ) ) ; +#25612 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180450100, 61.65075715145295000, -28.20555803802997700 ) ) ; +#25613 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#25614 = ORIENTED_EDGE ( 'NONE', *, *, #76002, .T. ) ; +#25615 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25616 = CIRCLE ( 'NONE', #57163, 10.50000000000009600 ) ; +#25617 = AXIS2_PLACEMENT_3D ( 'NONE', #73025, #35750, #79267 ) ; +#25618 = ORIENTED_EDGE ( 'NONE', *, *, #74340, .T. ) ; +#25619 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 20.61077422949656300, -28.37255355648631600 ) ) ; +#25620 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25621 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964000, 28.65930907398620100, -28.35186440610856500 ) ) ; +#25622 = ORIENTED_EDGE ( 'NONE', *, *, #59942, .F. ) ; +#25623 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285565200, 53.67681279774481600, -28.70555803803030800 ) ) ; +#25624 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#25625 = VERTEX_POINT ( 'NONE', #16400 ) ; +#25626 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841392000, 18.16349705304866200, -28.30782889147480200 ) ) ; +#25627 = CIRCLE ( 'NONE', #1682, 10.00000000000009200 ) ; +#25628 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 90.16054007504462200, -28.34042301926884400 ) ) ; +#25629 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614804200, 41.60677350908856900, -28.30799595738882600 ) ) ; +#25630 = EDGE_LOOP ( 'NONE', ( #25895, #13769, #30916, #22722 ) ) ; +#25631 = EDGE_CURVE ( 'NONE', #65375, #11733, #4701, .T. ) ; +#25632 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965400, 39.15930907398619400, -28.35186440610857500 ) ) ; +#25633 = CONICAL_SURFACE ( 'NONE', #715, 10.00000000000009200, 0.7853981633974415100 ) ; +#25634 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#25635 = AXIS2_PLACEMENT_3D ( 'NONE', #17630, #61159, #23889 ) ; +#25636 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883531100, 18.20564881207761900, -28.41114655922297100 ) ) ; +#25637 = AXIS2_PLACEMENT_3D ( 'NONE', #33098, #8315, #51816 ) ; +#25638 = ORIENTED_EDGE ( 'NONE', *, *, #71698, .T. ) ; +#25639 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661467500, 17.99322649091134400, -28.30799595738867300 ) ) ; +#25640 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13653, #1100, #19895, #63423 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625876440703100E-007, 0.0002930369617398790800 ), + .UNSPECIFIED. ) ; +#25641 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#25642 = ORIENTED_EDGE ( 'NONE', *, *, #77027, .F. ) ; +#25643 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.79999999999999700, -28.20555803802997700 ) ) ; +#25644 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25645 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658264100, 41.44848545219034700, -28.67627428870436600 ) ) ; +#25646 = FACE_OUTER_BOUND ( 'NONE', #13740, .T. ) ; +#25647 = VERTEX_POINT ( 'NONE', #22915 ) ; +#25648 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 82.97376207875059600, -28.70555803802997700 ) ) ; +#25649 = CONICAL_SURFACE ( 'NONE', #37242, 10.50000000000009600, 0.7853981633974500600 ) ; +#25650 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#25651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25652 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629200, 90.80000000000001100, -28.55171188418377400 ) ) ; +#25653 = AXIS2_PLACEMENT_3D ( 'NONE', #78553, #41246, #3987 ) ; +#25654 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627434800, 73.66464174796072900, -28.53896444442202100 ) ) ; +#25655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25656 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12034, #30808, #49509, #12312 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885675059848600E-007, 0.0007987728781052867300 ), + .UNSPECIFIED. ) ; +#25658 = AXIS2_PLACEMENT_3D ( 'NONE', #77797, #40527, #3253 ) ; +#25659 = FACE_OUTER_BOUND ( 'NONE', #48866, .T. ) ; +#25660 = EDGE_CURVE ( 'NONE', #32321, #28617, #50390, .T. ) ; +#25661 = AXIS2_PLACEMENT_3D ( 'NONE', #17365, #23627, #54619 ) ; +#25662 = ORIENTED_EDGE ( 'NONE', *, *, #36501, .F. ) ; +#25663 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 33.33333333333335000, -5.205558038030008400 ) ) ; +#25664 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#25665 = AXIS2_PLACEMENT_3D ( 'NONE', #69470, #75714, #25988 ) ; +#25666 = ORIENTED_EDGE ( 'NONE', *, *, #52946, .T. ) ; +#25667 = CARTESIAN_POINT ( 'NONE', ( -15.51770601915500700, 8.964587961689979100, -28.65180968932673600 ) ) ; +#25668 = ORIENTED_EDGE ( 'NONE', *, *, #7428, .T. ) ; +#25669 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328942300, 28.36201280598323700, -28.29447340919133300 ) ) ; +#25670 = ADVANCED_FACE ( 'NONE', ( #68930 ), #48461, .T. ) ; +#25671 = CONICAL_SURFACE ( 'NONE', #74104, 10.00000000000009200, 0.7853981633974447300 ) ; +#25672 = ORIENTED_EDGE ( 'NONE', *, *, #18677, .T. ) ; +#25673 = CYLINDRICAL_SURFACE ( 'NONE', #57081, 12.50000000000000000 ) ; +#25674 = AXIS2_PLACEMENT_3D ( 'NONE', #31616, #75120, #37837 ) ; +#25675 = EDGE_LOOP ( 'NONE', ( #11950, #54586, #41575 ) ) ; +#25676 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205871200, 70.08245724453603000, -28.27504145778806300 ) ) ; +#25677 = VERTEX_POINT ( 'NONE', #66706 ) ; +#25678 = FACE_OUTER_BOUND ( 'NONE', #39553, .T. ) ; +#25679 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76194, #7914, #26726, #70199 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401350200, 0.004682530427069460400 ), + .UNSPECIFIED. ) ; +#25680 = EDGE_LOOP ( 'NONE', ( #61003, #80152, #16549 ) ) ; +#25681 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25682 = VERTEX_POINT ( 'NONE', #29486 ) ; +#25683 = EDGE_LOOP ( 'NONE', ( #12152, #8628, #47817, #50997 ) ) ; +#25684 = ADVANCED_FACE ( 'NONE', ( #783 ), #15405, .F. ) ; +#25685 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 57.92318720225497900, -28.70555803802997700 ) ) ; +#25686 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477658700, 18.38589569235178800, -28.27354076558377800 ) ) ; +#25687 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 4.666666666666678500, 8.320721403598824400 ) ) ; +#25688 = CIRCLE ( 'NONE', #55021, 10.50000000000009400 ) ; +#25689 = ORIENTED_EDGE ( 'NONE', *, *, #73986, .F. ) ; +#25690 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 51.65075715145312800, -28.20555803802997700 ) ) ; +#25691 = FACE_OUTER_BOUND ( 'NONE', #36564, .T. ) ; +#25692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25693 = EDGE_CURVE ( 'NONE', #23751, #7266, #50906, .T. ) ; +#25694 = ORIENTED_EDGE ( 'NONE', *, *, #25413, .F. ) ; +#25695 = ADVANCED_FACE ( 'NONE', ( #2722 ), #63098, .F. ) ; +#25696 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 36.92318720225497900, -28.70555803802995200 ) ) ; +#25698 = EDGE_CURVE ( 'NONE', #52770, #54395, #79639, .T. ) ; +#25697 = ORIENTED_EDGE ( 'NONE', *, *, #33925, .F. ) ; +#25699 = ORIENTED_EDGE ( 'NONE', *, *, #24904, .T. ) ; +#25700 = CARTESIAN_POINT ( 'NONE', ( 17.79620054807090000, 4.406298390029369300, -27.01883745339505800 ) ) ; +#25701 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25702 = EDGE_LOOP ( 'NONE', ( #67006, #4350, #46841, #28365 ) ) ; +#25703 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730371700, 70.01262610361151000, -28.29936525552455300 ) ) ; +#25704 = CONICAL_SURFACE ( 'NONE', #9543, 10.00000000000009600, 0.7853981633974447300 ) ; +#25705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25706 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537160800, 90.34267608797586000, -28.20555803803014400 ) ) ; +#25707 = EDGE_CURVE ( 'NONE', #4991, #29509, #17357, .T. ) ; +#25708 = ADVANCED_FACE ( 'NONE', ( #35852 ), #30045, .T. ) ; +#25709 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 10.11077422949657000, -28.37255355648631300 ) ) ; +#25710 = EDGE_CURVE ( 'NONE', #53623, #31596, #36468, .T. ) ; +#25711 = VERTEX_POINT ( 'NONE', #17743 ) ; +#25712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25713 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878500, 51.43250300240229900, -28.23966044827355000 ) ) ; +#25714 = EDGE_CURVE ( 'NONE', #28595, #57450, #22047, .T. ) ; +#25715 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 39.16666666666669300, -6.205558038030004800 ) ) ; +#25716 = ORIENTED_EDGE ( 'NONE', *, *, #22478, .T. ) ; +#25717 = EDGE_CURVE ( 'NONE', #71029, #42911, #7542, .T. ) ; +#25718 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25719 = EDGE_LOOP ( 'NONE', ( #74952, #71568, #37511 ) ) ; +#25720 = FACE_OUTER_BOUND ( 'NONE', #10965, .T. ) ; +#25721 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567159000, 39.35339758437810100, -28.20555803802995200 ) ) ; +#25722 = CARTESIAN_POINT ( 'NONE', ( 9.279233496941945000, 90.09951448976229900, -28.63282631410062300 ) ) ; +#25723 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 80.07141756547891000, -28.70555803802997700 ) ) ; +#25724 = CARTESIAN_POINT ( 'NONE', ( 22.48805004777844000, 99.08805004777843800, -25.59401454962596700 ) ) ; +#25725 = ADVANCED_FACE ( 'NONE', ( #31950 ), #44531, .T. ) ; +#25726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25727 = AXIS2_PLACEMENT_3D ( 'NONE', #7180, #13487, #44414 ) ; +#25728 = EDGE_CURVE ( 'NONE', #53446, #25124, #73913, .T. ) ; +#25729 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#25730 = EDGE_CURVE ( 'NONE', #75740, #6689, #46497, .T. ) ; +#25731 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 9.746602415621723000, -28.20555803803009500 ) ) ; +#25732 = EDGE_CURVE ( 'NONE', #35408, #20134, #59439, .T. ) ; +#25733 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20554, #51773, #70572, #33312 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143690933400E-007, 0.0004559721418120925800 ), + .UNSPECIFIED. ) ; +#25734 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#25735 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25736 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000042100, 16.17143691309382100, -28.36981695106813500 ) ) ; +#25737 = AXIS2_PLACEMENT_3D ( 'NONE', #35570, #79082, #41783 ) ; +#25738 = CIRCLE ( 'NONE', #25803, 9.500000000000097700 ) ; +#25739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25740 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856431600, 40.54666532841560700, -28.65803483468292600 ) ) ; +#25741 = CARTESIAN_POINT ( 'NONE', ( -15.68514033016292900, 45.54999999999999700, -28.35375031073498100 ) ) ; +#25742 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#25743 = ORIENTED_EDGE ( 'NONE', *, *, #35475, .T. ) ; +#25744 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042477200, 42.59027028261003500, -28.70555803802996700 ) ) ; +#25745 = AXIS2_PLACEMENT_3D ( 'NONE', #45173, #38671, #1689 ) ; +#25746 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25747 = AXIS2_PLACEMENT_3D ( 'NONE', #33936, #46404, #9149 ) ; +#25749 = VERTEX_POINT ( 'NONE', #74311 ) ; +#25748 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25750 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416073500, 20.01125751638927900, -28.53740755999534400 ) ) ; +#25751 = CONICAL_SURFACE ( 'NONE', #78746, 10.50000000000009600, 0.7853981633974482800 ) ; +#25752 = ORIENTED_EDGE ( 'NONE', *, *, #26796, .F. ) ; +#25753 = CIRCLE ( 'NONE', #18472, 9.500000000000099500 ) ; +#25754 = ORIENTED_EDGE ( 'NONE', *, *, #19750, .F. ) ; +#25755 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 45.50000000000000700, 6.847000845227641200 ) ) ; +#25756 = CIRCLE ( 'NONE', #75099, 9.500000000000099500 ) ; +#25757 = CIRCLE ( 'NONE', #14280, 9.500000000000099500 ) ; +#25758 = VERTEX_POINT ( 'NONE', #61799 ) ; +#25759 = ORIENTED_EDGE ( 'NONE', *, *, #17603, .T. ) ; +#25760 = EDGE_LOOP ( 'NONE', ( #58289, #18925, #71022 ) ) ; +#25761 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 10.66666666666668400, -3.705558038030004400 ) ) ; +#25762 = AXIS2_PLACEMENT_3D ( 'NONE', #45506, #20550, #2020 ) ; +#25763 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 27.50972971738994100, -28.70555803802994500 ) ) ; +#25764 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 38.00972971738994500, -28.70555803802995600 ) ) ; +#25765 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274344000, 12.16464174796073500, -28.53896444442197500 ) ) ; +#25766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25767 = CIRCLE ( 'NONE', #33106, 9.500000000000099500 ) ; +#25768 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 58.62623792124938400, -28.70555803802997700 ) ) ; +#25769 = EDGE_LOOP ( 'NONE', ( #40313, #18617, #31218 ) ) ; +#25770 = FACE_OUTER_BOUND ( 'NONE', #13677, .T. ) ; +#25771 = ORIENTED_EDGE ( 'NONE', *, *, #33679, .F. ) ; +#25772 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.43250300240229200, -28.20555803802997700 ) ) ; +#25773 = EDGE_CURVE ( 'NONE', #32315, #70708, #61162, .T. ) ; +#25774 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 68.62623792124938400, -28.70555803802997700 ) ) ; +#25775 = EDGE_LOOP ( 'NONE', ( #1010, #5666, #4043 ) ) ; +#25776 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 13.00000000000001600, -1.205558038030002800 ) ) ; +#25777 = ORIENTED_EDGE ( 'NONE', *, *, #80183, .F. ) ; +#25778 = AXIS2_PLACEMENT_3D ( 'NONE', #44075, #75130, #583 ) ; +#25779 = ORIENTED_EDGE ( 'NONE', *, *, #22977, .F. ) ; +#25780 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49532, #74352, #30830, #12334 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635004868200E-007, 0.0008082706238602433400 ), + .UNSPECIFIED. ) ; +#25781 = ORIENTED_EDGE ( 'NONE', *, *, #79219, .F. ) ; +#25782 = CYLINDRICAL_SURFACE ( 'NONE', #30894, 10.00000000000000000 ) ; +#25783 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#25784 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25785 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 61.52858243452103400, -28.70555803802997700 ) ) ; +#25786 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 65.79999999999998300, -28.20555803802997700 ) ) ; +#25787 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25788 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25789 = ORIENTED_EDGE ( 'NONE', *, *, #52587, .T. ) ; +#25790 = AXIS2_PLACEMENT_3D ( 'NONE', #76071, #38784, #1545 ) ; +#25791 = CARTESIAN_POINT ( 'NONE', ( 15.67863775941436100, 92.95727954512385300, -28.61309274038575600 ) ) ; +#25792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25793 = ORIENTED_EDGE ( 'NONE', *, *, #2064, .F. ) ; +#25794 = ADVANCED_FACE ( 'NONE', ( #13474 ), #30791, .T. ) ; +#25795 = FACE_OUTER_BOUND ( 'NONE', #53438, .T. ) ; +#25796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25797 = CARTESIAN_POINT ( 'NONE', ( -19.80622135918346100, 0.3873680023645316200, -21.46586497192606300 ) ) ; +#25798 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#25799 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#25800 = ADVANCED_FACE ( 'NONE', ( #65074 ), #42617, .F. ) ; +#25801 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853733700, 61.25732391202370800, -28.20555803803030800 ) ) ; +#25802 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#25803 = AXIS2_PLACEMENT_3D ( 'NONE', #26754, #70242, #32987 ) ; +#25804 = ADVANCED_FACE ( 'NONE', ( #67003 ), #9538, .F. ) ; +#25805 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855085800, 67.92318720225479500, -28.70555803802997700 ) ) ; +#25806 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690205900, 55.79999999999966300, -28.70555803803030800 ) ) ; +#25807 = EDGE_CURVE ( 'NONE', #52332, #77718, #26119, .T. ) ; +#25808 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 16.50000000000002100, 4.650848422521016300 ) ) ; +#25809 = CIRCLE ( 'NONE', #112, 10.50000000000009800 ) ; +#25810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25811 = CARTESIAN_POINT ( 'NONE', ( -9.254548258615129100, 28.59617684379259800, -28.64146614751464500 ) ) ; +#25812 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.16749699759738200, -28.20555803803047800 ) ) ; +#25813 = ORIENTED_EDGE ( 'NONE', *, *, #16531, .F. ) ; +#25814 = CIRCLE ( 'NONE', #44185, 10.00000000000009400 ) ; +#25815 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#25816 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823699600, 21.40456253568400800, -28.61277292027076100 ) ) ; +#25817 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431100, 20.67701665379226500, -28.20555803802994200 ) ) ; +#25818 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707777200, 69.93589406416700200, -28.68054222049973800 ) ) ; +#25819 = ORIENTED_EDGE ( 'NONE', *, *, #7099, .T. ) ; +#25820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75163, #614, #19392, #62937 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190604993400E-007, 0.0006649560044141145500 ), + .UNSPECIFIED. ) ; +#25821 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 39.35339758437810100, -28.20555803802995200 ) ) ; +#25822 = CIRCLE ( 'NONE', #44244, 9.500000000000099500 ) ; +#25823 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25824 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432826800, 9.746602415621900700, -28.20555803802992800 ) ) ; +#25825 = FACE_OUTER_BOUND ( 'NONE', #48672, .T. ) ; +#25826 = EDGE_CURVE ( 'NONE', #78215, #69283, #44911, .T. ) ; +#25827 = ORIENTED_EDGE ( 'NONE', *, *, #79910, .F. ) ; +#25828 = EDGE_CURVE ( 'NONE', #50836, #70963, #77682, .T. ) ; +#25829 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59946, #16416, #66201, #28974 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.796294493718590200E-007, 0.0007679767755145127100 ), + .UNSPECIFIED. ) ; +#25830 = EDGE_LOOP ( 'NONE', ( #60817, #78476, #7778, #2610, #72114 ) ) ; +#25831 = LINE ( 'NONE', #77786, #40391 ) ; +#25832 = ORIENTED_EDGE ( 'NONE', *, *, #69071, .F. ) ; +#25833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #469, #13014, #31770, #75279 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859920361300E-007, 0.0008759659331884766100 ), + .UNSPECIFIED. ) ; +#25834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25835 = ORIENTED_EDGE ( 'NONE', *, *, #6013, .F. ) ; +#25836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25837 = AXIS2_PLACEMENT_3D ( 'NONE', #36034, #79560, #42258 ) ; +#25838 = EDGE_CURVE ( 'NONE', #76954, #48353, #75711, .T. ) ; +#25839 = EDGE_CURVE ( 'NONE', #2153, #56903, #30532, .T. ) ; +#25840 = CARTESIAN_POINT ( 'NONE', ( -4.720766503057954600, 60.09951448976264700, -28.63282631410026000 ) ) ; +#25841 = EDGE_CURVE ( 'NONE', #52097, #45068, #16049, .T. ) ; +#25842 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465429700, 29.49920551340398900, -28.70555803802994200 ) ) ; +#25843 = FACE_OUTER_BOUND ( 'NONE', #61645, .T. ) ; +#25844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31427, #68676, #391, #43881 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565733945681200E-007, 0.0006649316450229566000 ), + .UNSPECIFIED. ) ; +#25845 = FACE_OUTER_BOUND ( 'NONE', #17573, .T. ) ; +#25846 = EDGE_CURVE ( 'NONE', #8208, #34314, #1565, .T. ) ; +#25847 = ORIENTED_EDGE ( 'NONE', *, *, #69522, .T. ) ; +#25848 = AXIS2_PLACEMENT_3D ( 'NONE', #47033, #53030, #71832 ) ; +#25849 = CIRCLE ( 'NONE', #71103, 10.00000000000009400 ) ; +#25850 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825480200, 60.16054007504464400, -28.34042301926889700 ) ) ; +#25851 = EDGE_LOOP ( 'NONE', ( #847, #38605, #42601 ) ) ; +#25852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25853 = EDGE_LOOP ( 'NONE', ( #8463, #15456, #70209 ) ) ; +#25854 = VERTEX_POINT ( 'NONE', #810 ) ; +#25855 = ORIENTED_EDGE ( 'NONE', *, *, #32590, .T. ) ; +#25856 = CONICAL_SURFACE ( 'NONE', #74021, 10.00000000000009200, 0.7853981633974447300 ) ; +#25857 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 60.16666666666666400, 3.794441961969996900 ) ) ; +#25858 = AXIS2_PLACEMENT_3D ( 'NONE', #72340, #16573, #47525 ) ; +#25859 = ORIENTED_EDGE ( 'NONE', *, *, #59165, .F. ) ; +#25860 = AXIS2_PLACEMENT_3D ( 'NONE', #3467, #46975, #9752 ) ; +#25861 = VERTEX_POINT ( 'NONE', #31859 ) ; +#25862 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#25863 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 25.16666666666666800, 6.794441961969992500 ) ) ; +#25864 = CIRCLE ( 'NONE', #71725, 10.50000000000009800 ) ; +#25865 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25866 = ORIENTED_EDGE ( 'NONE', *, *, #33926, .F. ) ; +#25867 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#25868 = CIRCLE ( 'NONE', #63750, 10.50000000000009600 ) ; +#25869 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 62.50000000000001400, -9.258116921287651700 ) ) ; +#25870 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 57.92318720225498700, -28.70555803802997700 ) ) ; +#25871 = AXIS2_PLACEMENT_3D ( 'NONE', #31615, #62616, #37835 ) ; +#25872 = EDGE_CURVE ( 'NONE', #75104, #27173, #73800, .T. ) ; +#25873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33680, #70934, #2642, #46153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258657911900, 0.0009376791149928468100 ), + .UNSPECIFIED. ) ; +#25874 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25875 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25876 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344544500, 10.17701665379220800, -28.20555803802993500 ) ) ; +#25877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25878 = CIRCLE ( 'NONE', #68877, 10.00000000000009200 ) ; +#25879 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576916500, 45.54999999999999700, -28.65220501466659500 ) ) ; +#25880 = EDGE_CURVE ( 'NONE', #60180, #50605, #67913, .T. ) ; +#25881 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718938300, 81.13768531620324600, -28.37082013777818500 ) ) ; +#25882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25883 = AXIS2_PLACEMENT_3D ( 'NONE', #78457, #41166, #3900 ) ; +#25884 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609694100, 60.13716795162660800, -28.48697406221658600 ) ) ; +#25885 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000012600, 67.22261628933235000, -28.70555803803047500 ) ) ; +#25886 = VERTEX_POINT ( 'NONE', #38330 ) ; +#25887 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#25889 = VERTEX_POINT ( 'NONE', #1088 ) ; +#25888 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122122300, 50.07332680091206400, -28.37233769390154600 ) ) ; +#25890 = ADVANCED_FACE ( 'NONE', ( #59178 ), #71852, .T. ) ; +#25891 = FACE_OUTER_BOUND ( 'NONE', #4980, .T. ) ; +#25892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25893 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#25894 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#25895 = ORIENTED_EDGE ( 'NONE', *, *, #47851, .T. ) ; +#25896 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#25897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25898 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#25899 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 55.47903320442299000, -28.36604143581847700 ) ) ; +#25900 = CARTESIAN_POINT ( 'NONE', ( -3.535187653982936800, 9.406791769321969800, -28.68794773163825000 ) ) ; +#25901 = FACE_OUTER_BOUND ( 'NONE', #39031, .T. ) ; +#25902 = AXIS2_PLACEMENT_3D ( 'NONE', #25279, #68782, #31536 ) ; +#25903 = CIRCLE ( 'NONE', #25148, 10.50000000000009600 ) ; +#25904 = ORIENTED_EDGE ( 'NONE', *, *, #18885, .T. ) ; +#25905 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 66.00000000000000000, -1.205558038030005300 ) ) ; +#25906 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655646000, 31.17701665379238200, -28.20555803802996000 ) ) ; +#25907 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25908 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818076400, 59.94924284854686600, -28.20555803803047800 ) ) ; +#25909 = CIRCLE ( 'NONE', #32785, 10.50000000000009600 ) ; +#25910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25911 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472516600, 14.04999999999928800, -28.20555803803042500 ) ) ; +#25912 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .F. ) ; +#25913 = ORIENTED_EDGE ( 'NONE', *, *, #33891, .F. ) ; +#25914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25915 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818086000, 71.65075715145327700, -28.20555803803047800 ) ) ; +#25916 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25917 = AXIS2_PLACEMENT_3D ( 'NONE', #29636, #48336, #11120 ) ; +#25918 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25919 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#25920 = ADVANCED_FACE ( 'NONE', ( #57232 ), #38694, .F. ) ; +#25921 = CIRCLE ( 'NONE', #60293, 10.00000000000009400 ) ; +#25922 = CIRCLE ( 'NONE', #60658, 10.50000000000009600 ) ; +#25923 = ORIENTED_EDGE ( 'NONE', *, *, #8668, .F. ) ; +#25924 = EDGE_CURVE ( 'NONE', #21857, #4291, #53430, .T. ) ; +#25925 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#25926 = EDGE_LOOP ( 'NONE', ( #72082, #10516, #58525, #1351 ) ) ; +#25927 = ORIENTED_EDGE ( 'NONE', *, *, #527, .F. ) ; +#25928 = EDGE_LOOP ( 'NONE', ( #8434, #11095, #28289, #26256 ) ) ; +#25929 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 60.69949493661175700, -28.70555803802997700 ) ) ; +#25930 = ORIENTED_EDGE ( 'NONE', *, *, #55078, .T. ) ; +#25931 = VERTEX_POINT ( 'NONE', #44840 ) ; +#25932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25933 = CONICAL_SURFACE ( 'NONE', #71977, 10.50000000000009600, 0.7853981633974500600 ) ; +#25934 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 31.16666666666668200, 0.9380355014189834000 ) ) ; +#25935 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.23796787468682400, -28.38801640354855800 ) ) ; +#25936 = CIRCLE ( 'NONE', #74491, 9.500000000000099500 ) ; +#25937 = ORIENTED_EDGE ( 'NONE', *, *, #43650, .T. ) ; +#25938 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#25939 = CARTESIAN_POINT ( 'NONE', ( -11.95723973586455800, 55.79999999999999700, -28.53819074160683300 ) ) ; +#25940 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39074, #1808, #45312, #8070 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569998377500E-007, 0.0004053774948102473600 ), + .UNSPECIFIED. ) ; +#25941 = CIRCLE ( 'NONE', #79010, 10.00000000000009200 ) ; +#25942 = EDGE_CURVE ( 'NONE', #38210, #3408, #38943, .T. ) ; +#25943 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124994000, 76.46717019299461500, -28.53914313452728600 ) ) ; +#25944 = ORIENTED_EDGE ( 'NONE', *, *, #77153, .F. ) ; +#25945 = CONICAL_SURFACE ( 'NONE', #47490, 10.00000000000009200, 0.7853981633974447300 ) ; +#25946 = EDGE_CURVE ( 'NONE', #5208, #53776, #24524, .T. ) ; +#25947 = CARTESIAN_POINT ( 'NONE', ( 8.466819876342331200, 65.79999999999998300, -28.37307693585060900 ) ) ; +#25948 = AXIS2_PLACEMENT_3D ( 'NONE', #23410, #66931, #29700 ) ; +#25949 = EDGE_CURVE ( 'NONE', #40326, #47683, #55275, .T. ) ; +#25950 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11421, #72892, #23933, #67437 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388543157600E-007, 0.0007987676590766339000 ), + .UNSPECIFIED. ) ; +#25951 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283200, 41.24660241562181500, -28.20555803802996700 ) ) ; +#25952 = EDGE_LOOP ( 'NONE', ( #39508, #2939, #44533 ) ) ; +#25953 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25954 = CARTESIAN_POINT ( 'NONE', ( 4.745461813558220500, 39.09617548195245700, -28.64146967277533000 ) ) ; +#25955 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 2.500000000000000400, -9.258116921287651700 ) ) ; +#25956 = EDGE_CURVE ( 'NONE', #3351, #32315, #10065, .T. ) ; +#25957 = AXIS2_PLACEMENT_3D ( 'NONE', #19179, #68941, #56427 ) ; +#25958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#25960 = CONICAL_SURFACE ( 'NONE', #65230, 10.50000000000009600, 0.7853981633974500600 ) ; +#25961 = ORIENTED_EDGE ( 'NONE', *, *, #72299, .F. ) ; +#25962 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444652800, 81.87833896172689700, -28.53892303408235900 ) ) ; +#25963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77445, #58672, #71461, #34205 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786108601600E-007, 0.0007677775503743808100 ), + .UNSPECIFIED. ) ; +#25964 = FACE_OUTER_BOUND ( 'NONE', #47028, .T. ) ; +#25965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25966 = CARTESIAN_POINT ( 'NONE', ( 19.12517143291734100, 1.748905744634679800, -24.39058714335547200 ) ) ; +#25967 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#25968 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#25969 = VERTEX_POINT ( 'NONE', #32899 ) ; +#25970 = CONICAL_SURFACE ( 'NONE', #7637, 10.00000000000009600, 0.7853981633974482800 ) ; +#25971 = PLANE ( 'NONE', #69356 ) ; +#25972 = AXIS2_PLACEMENT_3D ( 'NONE', #38530, #63352, #32053 ) ; +#25973 = VERTEX_POINT ( 'NONE', #20414 ) ; +#25974 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39492, #70502, #76753, #2222 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184993500, 0.001517199873936111300 ), + .UNSPECIFIED. ) ; +#25975 = EDGE_CURVE ( 'NONE', #75589, #35494, #76365, .T. ) ; +#25976 = EDGE_CURVE ( 'NONE', #42613, #33868, #61941, .T. ) ; +#25977 = ADVANCED_FACE ( 'NONE', ( #40671 ), #69864, .F. ) ; +#25979 = AXIS2_PLACEMENT_3D ( 'NONE', #68398, #34427, #49589 ) ; +#25978 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#25980 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#25981 = CONICAL_SURFACE ( 'NONE', #71840, 10.50000000000009600, 0.7853981633974482800 ) ; +#25982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25983 = FACE_OUTER_BOUND ( 'NONE', #33716, .T. ) ; +#25984 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 36.99999999999999300, 3.794441961969998300 ) ) ; +#25985 = ORIENTED_EDGE ( 'NONE', *, *, #79808, .F. ) ; +#25986 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686400, 31.17701665379241000, -28.20555803802996000 ) ) ; +#25987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25988 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25989 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841341200, 18.16349705304836000, -28.30782889147495100 ) ) ; +#25990 = VERTEX_POINT ( 'NONE', #39425 ) ; +#25991 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 67.92318720225497900, -28.70555803802997700 ) ) ; +#25992 = EDGE_CURVE ( 'NONE', #19106, #49575, #28083, .T. ) ; +#25993 = CARTESIAN_POINT ( 'NONE', ( 18.06956647238262900, 97.73913294476248800, -26.61980533947683400 ) ) ; +#25994 = VERTEX_POINT ( 'NONE', #33183 ) ; +#25995 = ADVANCED_FACE ( 'NONE', ( #5641 ), #20243, .T. ) ; +#25996 = CARTESIAN_POINT ( 'NONE', ( -16.52197549498863800, 28.62306210240192100, -28.54786661478391400 ) ) ; +#25997 = AXIS2_PLACEMENT_3D ( 'NONE', #30041, #73526, #36252 ) ; +#25998 = AXIS2_PLACEMENT_3D ( 'NONE', #27674, #71165, #33901 ) ; +#25999 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878100, 70.16749699759769500, -28.23966044827355000 ) ) ; +#26000 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654625000, 60.27440177985822300, -28.29986836858012800 ) ) ; +#26001 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26002 = FACE_OUTER_BOUND ( 'NONE', #79368, .T. ) ; +#26003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26004 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26005 = ORIENTED_EDGE ( 'NONE', *, *, #1621, .F. ) ; +#26006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26007 = VERTEX_POINT ( 'NONE', #33446 ) ; +#26008 = ADVANCED_FACE ( 'NONE', ( #11525 ), #67929, .F. ) ; +#26009 = ORIENTED_EDGE ( 'NONE', *, *, #34655, .T. ) ; +#26010 = EDGE_LOOP ( 'NONE', ( #54504, #41491, #56400, #63537 ) ) ; +#26011 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102700, 19.04280755395589300, -28.45034744217088400 ) ) ; +#26012 = EDGE_LOOP ( 'NONE', ( #21315, #79270, #17510, #51140 ) ) ; +#26013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26014 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.86203212531317800, -28.38801640354855800 ) ) ; +#26015 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818041300, 51.65075715145332700, -28.20555803803005900 ) ) ; +#26016 = CONICAL_SURFACE ( 'NONE', #39036, 10.50000000000009600, 0.7853981633974518300 ) ; +#26017 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#26018 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534586200, 29.49920551340399300, -28.70555803802994200 ) ) ; +#26019 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899340900, 28.12363993080084900, -28.38670679782167700 ) ) ; +#26020 = ORIENTED_EDGE ( 'NONE', *, *, #26831, .F. ) ; +#26021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26022 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15779, #3511, #22297, #65833 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625876465735100E-007, 0.0002930369617398765800 ), + .UNSPECIFIED. ) ; +#26023 = ADVANCED_FACE ( 'NONE', ( #7566 ), #14951, .T. ) ; +#26024 = ORIENTED_EDGE ( 'NONE', *, *, #74363, .T. ) ; +#26025 = CONICAL_SURFACE ( 'NONE', #30978, 10.00000000000009600, 0.7853981633974482800 ) ; +#26026 = AXIS2_PLACEMENT_3D ( 'NONE', #7967, #51462, #14248 ) ; +#26027 = EDGE_LOOP ( 'NONE', ( #12317, #16710, #65036, #46405 ) ) ; +#26028 = CIRCLE ( 'NONE', #64722, 10.00000000000009400 ) ; +#26029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26030 = CONICAL_SURFACE ( 'NONE', #10533, 10.50000000000009600, 0.7853981633974500600 ) ; +#26031 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 8.500000000000007100, 2.454695999814380200 ) ) ; +#26032 = AXIS2_PLACEMENT_3D ( 'NONE', #64402, #27121, #70609 ) ; +#26033 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#26034 = ORIENTED_EDGE ( 'NONE', *, *, #47076, .T. ) ; +#26035 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26036 = EDGE_CURVE ( 'NONE', #1536, #24293, #47411, .T. ) ; +#26037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26038 = AXIS2_PLACEMENT_3D ( 'NONE', #9911, #65956, #22428 ) ; +#26039 = CONICAL_SURFACE ( 'NONE', #57323, 10.00000000000009600, 0.7853981633974447300 ) ; +#26040 = VERTEX_POINT ( 'NONE', #64763 ) ; +#26041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26043 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 70.13716795162659400, -28.48697406221667400 ) ) ; +#26044 = EDGE_LOOP ( 'NONE', ( #10836, #49885, #9539 ) ) ; +#26045 = ORIENTED_EDGE ( 'NONE', *, *, #32607, .F. ) ; +#26046 = CIRCLE ( 'NONE', #72266, 10.50000000000009600 ) ; +#26047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44695, #1221, #63547, #26288 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572489702000E-007, 0.0004669842289003773700 ), + .UNSPECIFIED. ) ; +#26048 = EDGE_LOOP ( 'NONE', ( #78558, #6274, #67035, #11886 ) ) ; +#26049 = PLANE ( 'NONE', #12154 ) ; +#26050 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661505400, 17.99322649091121200, -28.30799595738901400 ) ) ; +#26051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#26052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26053 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174630400, 70.16054007504466500, -28.34042301926885100 ) ) ; +#26054 = CYLINDRICAL_SURFACE ( 'NONE', #16665, 10.00000000000000200 ) ; +#26056 = EDGE_CURVE ( 'NONE', #70940, #77979, #53328, .T. ) ; +#26055 = VERTEX_POINT ( 'NONE', #46194 ) ; +#26058 = EDGE_CURVE ( 'NONE', #29021, #54053, #32979, .T. ) ; +#26057 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31192, #68432, #37392, #151 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983720882132500E-007, 0.001076779618376950100 ), + .UNSPECIFIED. ) ; +#26059 = CARTESIAN_POINT ( 'NONE', ( -18.73801319536612200, 2.523969879966780500, -25.34707212178963000 ) ) ; +#26060 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26061 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 60.34267608797601700, -28.20555803802997700 ) ) ; +#26062 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500185800, 69.83662311806142500, -28.37223523914928300 ) ) ; +#26063 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484576100, 90.58127875436079500, -28.53757464917603700 ) ) ; +#26064 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826523600, 79.95051138331400900, -28.33414295261581700 ) ) ; +#26065 = ORIENTED_EDGE ( 'NONE', *, *, #12668, .F. ) ; +#26066 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571434200, 49.57141756547891700, -28.70555803802996700 ) ) ; +#26067 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783826900, 61.43250300240179500, -28.23966044827385600 ) ) ; +#26068 = EDGE_CURVE ( 'NONE', #55474, #12400, #18531, .T. ) ; +#26069 = ADVANCED_FACE ( 'NONE', ( #24154 ), #1714, .F. ) ; +#26070 = CONICAL_SURFACE ( 'NONE', #42145, 10.00000000000009200, 0.7853981633974447300 ) ; +#26071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26072 = EDGE_CURVE ( 'NONE', #44803, #39291, #4073, .T. ) ; +#26073 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528038554300, 67.94142842854276400, -28.37229765499282100 ) ) ; +#26074 = FACE_OUTER_BOUND ( 'NONE', #57360, .T. ) ; +#26075 = VERTEX_POINT ( 'NONE', #40507 ) ; +#26076 = AXIS2_PLACEMENT_3D ( 'NONE', #59545, #22276, #65805 ) ; +#26077 = ORIENTED_EDGE ( 'NONE', *, *, #51993, .T. ) ; +#26078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26079 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 14.33333333333333900, -5.205558038030008400 ) ) ; +#26080 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#26081 = ORIENTED_EDGE ( 'NONE', *, *, #13787, .T. ) ; +#26082 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26083 = ORIENTED_EDGE ( 'NONE', *, *, #36507, .F. ) ; +#26084 = ORIENTED_EDGE ( 'NONE', *, *, #77399, .F. ) ; +#26085 = EDGE_LOOP ( 'NONE', ( #29323, #62995, #65738, #65683, #23488, #11843 ) ) ; +#26086 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#26087 = CARTESIAN_POINT ( 'NONE', ( 3.371507771243950700, 51.43250300240229900, -28.25053031809460100 ) ) ; +#26088 = ADVANCED_FACE ( 'NONE', ( #36775 ), #49388, .F. ) ; +#26089 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#26090 = VERTEX_POINT ( 'NONE', #53002 ) ; +#26091 = AXIS2_PLACEMENT_3D ( 'NONE', #23630, #11123, #79396 ) ; +#26092 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856768900, 83.67681279774504300, -28.70555803802997700 ) ) ; +#26093 = EDGE_CURVE ( 'NONE', #8089, #74917, #3677, .T. ) ; +#26094 = EDGE_CURVE ( 'NONE', #71041, #6355, #70374, .T. ) ; +#26095 = EDGE_CURVE ( 'NONE', #65026, #30223, #55912, .T. ) ; +#26096 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148346300, 34.09761904761936800, -28.70555803802995200 ) ) ; +#26097 = CIRCLE ( 'NONE', #63726, 9.500000000000097700 ) ; +#26098 = CARTESIAN_POINT ( 'NONE', ( -14.89966555183968900, 80.79999999999999700, -28.20555803802991000 ) ) ; +#26099 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #50327, #38095 ) ; +#26100 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 87.94142842854310500, -28.20555803802997700 ) ) ; +#26101 = ORIENTED_EDGE ( 'NONE', *, *, #28131, .F. ) ; +#26102 = ADVANCED_FACE ( 'NONE', ( #51332 ), #80578, .F. ) ; +#26103 = VERTEX_POINT ( 'NONE', #41050 ) ; +#26104 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189904300, 28.12363993080123900, -28.38670679782145700 ) ) ; +#26105 = AXIS2_PLACEMENT_3D ( 'NONE', #27794, #58769, #65058 ) ; +#26106 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26107 = FACE_OUTER_BOUND ( 'NONE', #13635, .T. ) ; +#26108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26109 = EDGE_CURVE ( 'NONE', #63226, #49034, #41461, .T. ) ; +#26110 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462479300, 81.39409401757626500, -28.39369363572360400 ) ) ; +#26111 = AXIS2_PLACEMENT_3D ( 'NONE', #71318, #21576, #27836 ) ; +#26112 = AXIS2_PLACEMENT_3D ( 'NONE', #71876, #78111, #40291 ) ; +#26113 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26114 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851502700, 44.59761904761904800, -28.70555803802996700 ) ) ; +#26115 = ORIENTED_EDGE ( 'NONE', *, *, #45476, .F. ) ; +#26116 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77430, #21694, #71445, #34188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560270300, 0.003631405919786759200 ), + .UNSPECIFIED. ) ; +#26117 = ADVANCED_FACE ( 'NONE', ( #16357 ), #47437, .T. ) ; +#26118 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571488300, 71.52858243452088500, -28.70555803803014400 ) ) ; +#26119 = CIRCLE ( 'NONE', #78677, 9.500000000000099500 ) ; +#26121 = ORIENTED_EDGE ( 'NONE', *, *, #10337, .F. ) ; +#26120 = CARTESIAN_POINT ( 'NONE', ( -3.160449548280910700, 71.13768531620317500, -28.37082013777821400 ) ) ; +#26122 = VERTEX_POINT ( 'NONE', #35099 ) ; +#26123 = ADVANCED_FACE ( 'NONE', ( #65995 ), #14387, .T. ) ; +#26124 = CONICAL_SURFACE ( 'NONE', #8593, 10.00000000000009200, 0.7853981633974447300 ) ; +#26125 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 58.00000000000002100, -6.205558038030003100 ) ) ; +#26126 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#26127 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338531200, 38.99322649091134700, -28.30799595738869500 ) ) ; +#26128 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 23.00000000000000700, -9.205558038030005700 ) ) ; +#26129 = AXIS2_PLACEMENT_3D ( 'NONE', #6112, #49577, #12382 ) ; +#26130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26131 = CIRCLE ( 'NONE', #17149, 9.500000000000095900 ) ; +#26132 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#26133 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 60.33333333333333600, 8.320721403598817300 ) ) ; +#26134 = ORIENTED_EDGE ( 'NONE', *, *, #33064, .F. ) ; +#26135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56999, #13494, #25736, #19731 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460908769093300E-007, 0.0008482521192574834100 ), + .UNSPECIFIED. ) ; +#26136 = ORIENTED_EDGE ( 'NONE', *, *, #59657, .F. ) ; +#26137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26138 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26139 = EDGE_LOOP ( 'NONE', ( #19072, #79366, #19929, #7535 ) ) ; +#26140 = AXIS2_PLACEMENT_3D ( 'NONE', #15041, #33535, #21314 ) ; +#26141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26142 = CARTESIAN_POINT ( 'NONE', ( -2.716823492900934100, 20.53732497909462000, -28.41043597897460800 ) ) ; +#26143 = EDGE_CURVE ( 'NONE', #75076, #462, #27022, .T. ) ; +#26144 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26145 = CIRCLE ( 'NONE', #49835, 9.500000000000095900 ) ; +#26146 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26147 = CIRCLE ( 'NONE', #67798, 9.500000000000099500 ) ; +#26148 = ORIENTED_EDGE ( 'NONE', *, *, #23209, .F. ) ; +#26149 = EDGE_LOOP ( 'NONE', ( #52704, #32691, #49923, #77026 ) ) ; +#26150 = AXIS2_PLACEMENT_3D ( 'NONE', #3175, #65511, #27987 ) ; +#26151 = ORIENTED_EDGE ( 'NONE', *, *, #57963, .F. ) ; +#26152 = CYLINDRICAL_SURFACE ( 'NONE', #4855, 10.00000000000000200 ) ; +#26153 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#26154 = ORIENTED_EDGE ( 'NONE', *, *, #14899, .T. ) ; +#26155 = EDGE_LOOP ( 'NONE', ( #69904, #11502, #63873, #5351, #32994, #44830 ) ) ; +#26156 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.997474040497479600, -28.26641963845868900 ) ) ; +#26157 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1470, #7718, #26528, #70006 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121410523500 ), + .UNSPECIFIED. ) ; +#26158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26159 = EDGE_LOOP ( 'NONE', ( #58402, #79591, #28375, #53896 ) ) ; +#26160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26161 = EDGE_LOOP ( 'NONE', ( #26272, #62040, #76939, #52879 ) ) ; +#26162 = ORIENTED_EDGE ( 'NONE', *, *, #8016, .T. ) ; +#26163 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26164 = CARTESIAN_POINT ( 'NONE', ( -3.628494729608065000, 51.43250300240229900, -28.25053119339279900 ) ) ; +#26165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26167 = CARTESIAN_POINT ( 'NONE', ( 16.53469939396887900, 9.232650303015562400, -28.58709120703529600 ) ) ; +#26168 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#26169 = ORIENTED_EDGE ( 'NONE', *, *, #22002, .F. ) ; +#26170 = PLANE ( 'NONE', #2715 ) ; +#26171 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#26172 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#26173 = CONICAL_SURFACE ( 'NONE', #5804, 10.00000000000009200, 0.7853981633974447300 ) ; +#26174 = EDGE_CURVE ( 'NONE', #34314, #23758, #30945, .T. ) ; +#26175 = EDGE_LOOP ( 'NONE', ( #57492, #75606, #70443 ) ) ; +#26176 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 63.83333333333333600, -3.349151577478984600 ) ) ; +#26177 = CARTESIAN_POINT ( 'NONE', ( -16.73584074219409600, 9.425639482014352300, -28.45080305020446000 ) ) ; +#26178 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26179 = EDGE_LOOP ( 'NONE', ( #34351, #53628, #26234, #16508 ) ) ; +#26180 = ORIENTED_EDGE ( 'NONE', *, *, #29339, .T. ) ; +#26181 = EDGE_CURVE ( 'NONE', #50285, #17621, #12550, .T. ) ; +#26182 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#26183 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052152700, 80.28233213024645900, -28.25051428653848600 ) ) ; +#26184 = CONICAL_SURFACE ( 'NONE', #499, 10.00000000000009600, 0.7853981633974447300 ) ; +#26185 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195768700, 17.00972971738969600, -28.70555803803005900 ) ) ; +#26186 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 71.43945992495532900, -28.34042301926881200 ) ) ; +#26187 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 61.43945992495518000, -28.34042301926893600 ) ) ; +#26188 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855103500, 77.92318720225479500, -28.70555803802997700 ) ) ; +#26189 = EDGE_LOOP ( 'NONE', ( #62748, #41018, #70126, #59622, #4633 ) ) ; +#26190 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507532300, 50.20543520232829600, -28.70555803802996700 ) ) ; +#26191 = EDGE_CURVE ( 'NONE', #15610, #34010, #34856, .T. ) ; +#26192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26193 = ORIENTED_EDGE ( 'NONE', *, *, #43543, .F. ) ; +#26194 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16145, #53401, #34926, #78442 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178854046400E-007, 0.0005050261270288289700 ), + .UNSPECIFIED. ) ; +#26195 = EDGE_CURVE ( 'NONE', #80236, #69375, #78898, .T. ) ; +#26196 = AXIS2_PLACEMENT_3D ( 'NONE', #28488, #22191, #9674 ) ; +#26197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26198 = EDGE_CURVE ( 'NONE', #1906, #39642, #64438, .T. ) ; +#26199 = CIRCLE ( 'NONE', #6683, 10.50000000000009800 ) ; +#26200 = ORIENTED_EDGE ( 'NONE', *, *, #6257, .T. ) ; +#26201 = ADVANCED_FACE ( 'NONE', ( #64048 ), #29037, .T. ) ; +#26202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26203 = EDGE_LOOP ( 'NONE', ( #52438, #23972, #4305, #4899 ) ) ; +#26204 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26205 = ADVANCED_FACE ( 'NONE', ( #22199 ), #76653, .T. ) ; +#26206 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 29.00000000000001100, -1.205558038030005300 ) ) ; +#26207 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#26208 = AXIS2_PLACEMENT_3D ( 'NONE', #42666, #73709, #79966 ) ; +#26209 = EDGE_CURVE ( 'NONE', #50428, #1580, #12447, .T. ) ; +#26210 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26211 = EDGE_CURVE ( 'NONE', #77240, #67308, #49903, .T. ) ; +#26212 = EDGE_CURVE ( 'NONE', #19455, #11977, #35496, .T. ) ; +#26213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26214 = ADVANCED_FACE ( 'NONE', ( #78650 ), #27049, .F. ) ; +#26215 = AXIS2_PLACEMENT_3D ( 'NONE', #70294, #57799, #26551 ) ; +#26216 = FACE_OUTER_BOUND ( 'NONE', #31887, .T. ) ; +#26217 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#26218 = FACE_OUTER_BOUND ( 'NONE', #55856, .T. ) ; +#26219 = ORIENTED_EDGE ( 'NONE', *, *, #74192, .T. ) ; +#26220 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466623300, 39.83106028708541400, -28.57333386111662300 ) ) ; +#26221 = ORIENTED_EDGE ( 'NONE', *, *, #37418, .T. ) ; +#26222 = AXIS2_PLACEMENT_3D ( 'NONE', #23632, #48606, #11396 ) ; +#26223 = AXIS2_PLACEMENT_3D ( 'NONE', #31103, #74610, #37301 ) ; +#26224 = ORIENTED_EDGE ( 'NONE', *, *, #14851, .F. ) ; +#26225 = CARTESIAN_POINT ( 'NONE', ( 3.031785615621764900, 71.31767869357338400, -28.25052235028430300 ) ) ; +#26226 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428564100, 41.52858243452107000, -28.70555803802997700 ) ) ; +#26227 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 0.3333333333333417500, 4.294441961970000500 ) ) ; +#26228 = CIRCLE ( 'NONE', #75383, 10.00000000000009200 ) ; +#26229 = ORIENTED_EDGE ( 'NONE', *, *, #27026, .T. ) ; +#26230 = CIRCLE ( 'NONE', #80783, 10.50000000000002500 ) ; +#26231 = ORIENTED_EDGE ( 'NONE', *, *, #26655, .T. ) ; +#26232 = ORIENTED_EDGE ( 'NONE', *, *, #7199, .F. ) ; +#26233 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26234 = ORIENTED_EDGE ( 'NONE', *, *, #70480, .T. ) ; +#26235 = CONICAL_SURFACE ( 'NONE', #69425, 10.50000000000009600, 0.7853981633974518300 ) ; +#26236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26237 = ORIENTED_EDGE ( 'NONE', *, *, #32649, .T. ) ; +#26238 = VERTEX_POINT ( 'NONE', #73674 ) ; +#26239 = VERTEX_POINT ( 'NONE', #61176 ) ; +#26240 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7119, #50626, #1129, #44612 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.919124238415806600E-005, 0.0003659026359592512800 ), + .UNSPECIFIED. ) ; +#26241 = ORIENTED_EDGE ( 'NONE', *, *, #49140, .F. ) ; +#26242 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894000, 51.13768531620324600, -28.37082013777818900 ) ) ; +#26243 = ORIENTED_EDGE ( 'NONE', *, *, #35614, .F. ) ; +#26244 = CARTESIAN_POINT ( 'NONE', ( -16.57127784838931800, 90.12774695439685500, -28.53061079109372100 ) ) ; +#26245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26247 = AXIS2_PLACEMENT_3D ( 'NONE', #55736, #62026, #12247 ) ; +#26248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26249 = ORIENTED_EDGE ( 'NONE', *, *, #28346, .F. ) ; +#26250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26251 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26252 = EDGE_LOOP ( 'NONE', ( #47013, #21060, #15920 ) ) ; +#26253 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26254 = CIRCLE ( 'NONE', #10455, 10.00000000000009200 ) ; +#26255 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 34.83333333333333600, -6.205558038030004800 ) ) ; +#26256 = ORIENTED_EDGE ( 'NONE', *, *, #62369, .F. ) ; +#26257 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504988200, 31.40771342879321900, -28.53891855579988900 ) ) ; +#26258 = CARTESIAN_POINT ( 'NONE', ( 4.766413273365424500, 94.21601807324991300, -28.37203026796576200 ) ) ; +#26259 = ORIENTED_EDGE ( 'NONE', *, *, #42719, .T. ) ; +#26260 = EDGE_CURVE ( 'NONE', #16691, #22368, #60148, .T. ) ; +#26261 = ORIENTED_EDGE ( 'NONE', *, *, #64928, .F. ) ; +#26262 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 70.34267608797567600, -28.20555803802997700 ) ) ; +#26263 = ORIENTED_EDGE ( 'NONE', *, *, #42749, .F. ) ; +#26264 = ORIENTED_EDGE ( 'NONE', *, *, #64443, .F. ) ; +#26265 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#26266 = AXIS2_PLACEMENT_3D ( 'NONE', #19302, #62845, #25580 ) ; +#26267 = CARTESIAN_POINT ( 'NONE', ( 2.785741443456005500, 81.52472935029901200, -28.39317435246126600 ) ) ; +#26268 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.68929190448937300, -28.20555803802997700 ) ) ; +#26269 = FACE_OUTER_BOUND ( 'NONE', #25675, .T. ) ; +#26270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26271 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252816500, 49.63131911501876200, -28.51286550264511300 ) ) ; +#26272 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ; +#26273 = CARTESIAN_POINT ( 'NONE', ( -12.06092805703277400, 10.00000000000006900, -28.70555803802998100 ) ) ; +#26274 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#26275 = CARTESIAN_POINT ( 'NONE', ( -4.533744140368824600, 91.59999999999999400, -28.70555803802999500 ) ) ; +#26276 = ORIENTED_EDGE ( 'NONE', *, *, #67083, .T. ) ; +#26277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26279 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#26280 = AXIS2_PLACEMENT_3D ( 'NONE', #48448, #11238, #54726 ) ; +#26281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26282 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26283 = VECTOR ( 'NONE', #55763, 1000.000000000000000 ) ; +#26284 = ORIENTED_EDGE ( 'NONE', *, *, #9984, .F. ) ; +#26285 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26286 = EDGE_LOOP ( 'NONE', ( #10300, #58850, #12350 ) ) ; +#26287 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 51.43945992495533700, -28.34042301926881200 ) ) ; +#26288 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747186300, 41.46868088498121800, -28.51286550264512700 ) ) ; +#26289 = ORIENTED_EDGE ( 'NONE', *, *, #43633, .T. ) ; +#26290 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274344000, 83.66464174796034600, -28.53896444442228400 ) ) ; +#26291 = CARTESIAN_POINT ( 'NONE', ( 16.56643609059903700, 36.22507724664293200, -28.58387515229136300 ) ) ; +#26292 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#26293 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 69.41684396980716100, -28.70555803802999500 ) ) ; +#26294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26295 = CARTESIAN_POINT ( 'NONE', ( 16.56790757632394300, 23.37072804553902100, -28.58363361004980900 ) ) ; +#26296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21977, #59236, #34501, #78006 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063899022500 ), + .UNSPECIFIED. ) ; +#26297 = EDGE_CURVE ( 'NONE', #49239, #76283, #43553, .T. ) ; +#26298 = FACE_OUTER_BOUND ( 'NONE', #22342, .T. ) ; +#26299 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56616, #50334, #69131, #31889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141654641000 ), + .UNSPECIFIED. ) ; +#26300 = EDGE_CURVE ( 'NONE', #46553, #35760, #45472, .T. ) ; +#26301 = FACE_OUTER_BOUND ( 'NONE', #47400, .T. ) ; +#26302 = ORIENTED_EDGE ( 'NONE', *, *, #76931, .T. ) ; +#26303 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18058, #42789, #49295, #12074 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374277628400, 0.0005468822770170403300 ), + .UNSPECIFIED. ) ; +#26304 = ADVANCED_FACE ( 'NONE', ( #18298 ), #25088, .T. ) ; +#26305 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 6.333333333333346400, -5.535685056952199400 ) ) ; +#26306 = ORIENTED_EDGE ( 'NONE', *, *, #2802, .F. ) ; +#26307 = EDGE_CURVE ( 'NONE', #19850, #73200, #41616, .T. ) ; +#26308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26309 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66467, #72728, #78989, #41683 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957488062000, 0.004414112765716555700 ), + .UNSPECIFIED. ) ; +#26310 = CIRCLE ( 'NONE', #75847, 10.50000000000009200 ) ; +#26311 = ORIENTED_EDGE ( 'NONE', *, *, #52468, .F. ) ; +#26312 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239500, 60.16054007504465100, -28.34042301926880800 ) ) ; +#26313 = ORIENTED_EDGE ( 'NONE', *, *, #41305, .F. ) ; +#26314 = EDGE_CURVE ( 'NONE', #23642, #67122, #21029, .T. ) ; +#26315 = EDGE_CURVE ( 'NONE', #14575, #77029, #6551, .T. ) ; +#26316 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844441900, 55.79999999999975600, -28.20555803803014400 ) ) ; +#26317 = CIRCLE ( 'NONE', #18328, 9.500000000000097700 ) ; +#26318 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26319 = ORIENTED_EDGE ( 'NONE', *, *, #68838, .T. ) ; +#26320 = VERTEX_POINT ( 'NONE', #18443 ) ; +#26321 = VERTEX_POINT ( 'NONE', #61976 ) ; +#26322 = ORIENTED_EDGE ( 'NONE', *, *, #35935, .T. ) ; +#26323 = EDGE_LOOP ( 'NONE', ( #19912, #35951, #17405 ) ) ; +#26324 = AXIS2_PLACEMENT_3D ( 'NONE', #52735, #40225, #70978 ) ; +#26325 = EDGE_CURVE ( 'NONE', #49022, #18877, #72886, .T. ) ; +#26326 = EDGE_CURVE ( 'NONE', #65437, #24594, #32873, .T. ) ; +#26327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26328 = EDGE_CURVE ( 'NONE', #26473, #368, #74722, .T. ) ; +#26329 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378051200, 50.77483928597539600, -28.57108397021911700 ) ) ; +#26330 = ADVANCED_FACE ( 'NONE', ( #58165 ), #23145, .F. ) ; +#26331 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26332 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#26333 = CONICAL_SURFACE ( 'NONE', #2553, 10.00000000000009200, 0.7853981633974447300 ) ; +#26334 = AXIS2_PLACEMENT_3D ( 'NONE', #61061, #5005, #23519 ) ; +#26335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26336 = ORIENTED_EDGE ( 'NONE', *, *, #29418, .F. ) ; +#26337 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783827700, 51.43250300240180200, -28.23966044827386000 ) ) ; +#26338 = EDGE_LOOP ( 'NONE', ( #2471, #54862, #38231 ) ) ; +#26339 = ORIENTED_EDGE ( 'NONE', *, *, #54252, .F. ) ; +#26340 = ORIENTED_EDGE ( 'NONE', *, *, #62874, .T. ) ; +#26341 = EDGE_LOOP ( 'NONE', ( #54538, #30519, #8796, #45719 ) ) ; +#26342 = ORIENTED_EDGE ( 'NONE', *, *, #76582, .T. ) ; +#26343 = CARTESIAN_POINT ( 'NONE', ( -17.24312431002096000, 5.513745181770460100, -27.64280131556594700 ) ) ; +#26344 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68830, #25336, #56581, #19317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978776966500, 0.0006311001363622075500 ), + .UNSPECIFIED. ) ; +#26345 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26346 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.34510448120795400, -28.37193179497697000 ) ) ; +#26347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26348 = CIRCLE ( 'NONE', #47767, 10.00000000000009600 ) ; +#26349 = AXIS2_PLACEMENT_3D ( 'NONE', #45186, #7958, #51446 ) ; +#26350 = ORIENTED_EDGE ( 'NONE', *, *, #59798, .F. ) ; +#26351 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#26352 = AXIS2_PLACEMENT_3D ( 'NONE', #13415, #56913, #19651 ) ; +#26353 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #548, #25341, #62590, #44042 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331885572800 ), + .UNSPECIFIED. ) ; +#26354 = CARTESIAN_POINT ( 'NONE', ( -10.42773891679285600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#26355 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 12.16666666666666400, 0.9380355014189834000 ) ) ; +#26356 = CIRCLE ( 'NONE', #24337, 10.00000000000009200 ) ; +#26357 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873544100, 37.42044679784048400, -28.64059091698901900 ) ) ; +#26358 = ORIENTED_EDGE ( 'NONE', *, *, #72711, .F. ) ; +#26359 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 61.68929190448861300, -28.20555803803030800 ) ) ; +#26360 = EDGE_LOOP ( 'NONE', ( #61434, #3149, #60149, #64732 ) ) ; +#26361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26362 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26363 = AXIS2_PLACEMENT_3D ( 'NONE', #48546, #29874, #54574 ) ; +#26364 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26365 = EDGE_CURVE ( 'NONE', #18676, #71408, #58419, .T. ) ; +#26366 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868847300, 70.01994747561606400, -28.24986299608863400 ) ) ; +#26367 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489519400, 9.940690926013788300, -28.35186440610861400 ) ) ; +#26368 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 74.83849307182684600, -28.68631150211663100 ) ) ; +#26369 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026329600, 45.54999999999999700, -28.70555803802996700 ) ) ; +#26370 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#26371 = CONICAL_SURFACE ( 'NONE', #43224, 10.50000000000009800, 0.7853981633974518300 ) ; +#26372 = EDGE_CURVE ( 'NONE', #50912, #2413, #39669, .T. ) ; +#26373 = EDGE_LOOP ( 'NONE', ( #50062, #19759, #36237, #20033 ) ) ; +#26374 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492304000, 68.56055603621115300, -28.70555803803004500 ) ) ; +#26375 = ORIENTED_EDGE ( 'NONE', *, *, #38549, .T. ) ; +#26376 = AXIS2_PLACEMENT_3D ( 'NONE', #15868, #53117, #28427 ) ; +#26377 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615344500, 90.79999999999950000, -28.55171188418401200 ) ) ; +#26378 = ORIENTED_EDGE ( 'NONE', *, *, #77394, .T. ) ; +#26379 = CARTESIAN_POINT ( 'NONE', ( -3.959731041493566500, 41.37561462481247100, -28.30309985153377300 ) ) ; +#26380 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783879500, 30.93250300240228900, -28.23966044827354300 ) ) ; +#26381 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972579600, 69.37488905616160700, -28.55192314908416100 ) ) ; +#26382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26383 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 28.85339758437810400, -28.20555803802994200 ) ) ; +#26384 = ADVANCED_FACE ( 'NONE', ( #72784 ), #54253, .F. ) ; +#26385 = CONICAL_SURFACE ( 'NONE', #1252, 10.50000000000009600, 0.7853981633974518300 ) ; +#26386 = ORIENTED_EDGE ( 'NONE', *, *, #63728, .T. ) ; +#26387 = AXIS2_PLACEMENT_3D ( 'NONE', #44934, #51187, #1453 ) ; +#26388 = VERTEX_POINT ( 'NONE', #6722 ) ; +#26389 = CARTESIAN_POINT ( 'NONE', ( -17.24313249431002500, 9.107555492912499800, -28.45072908466519800 ) ) ; +#26390 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26391 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .F. ) ; +#26392 = CIRCLE ( 'NONE', #39651, 10.00000000000009600 ) ; +#26393 = ORIENTED_EDGE ( 'NONE', *, *, #38537, .T. ) ; +#26394 = ORIENTED_EDGE ( 'NONE', *, *, #8267, .F. ) ; +#26395 = CARTESIAN_POINT ( 'NONE', ( -2.487278546917069700, 61.47860033657563900, -28.56001054660899600 ) ) ; +#26396 = EDGE_LOOP ( 'NONE', ( #53417, #7289, #22241, #78995 ) ) ; +#26397 = ORIENTED_EDGE ( 'NONE', *, *, #54984, .T. ) ; +#26398 = ADVANCED_FACE ( 'NONE', ( #56206 ), #21201, .T. ) ; +#26399 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 55.83333333333334300, 3.794441961969996900 ) ) ; +#26400 = AXIS2_PLACEMENT_3D ( 'NONE', #5008, #48481, #11279 ) ; +#26401 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112212400, 50.07332680091206400, -28.37233769390154600 ) ) ; +#26402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26403 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 20.83333333333333200, 6.794441961969992500 ) ) ; +#26404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54570, #10794, #23572, #67085 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061242700, 0.004414112765716289400 ), + .UNSPECIFIED. ) ; +#26405 = VERTEX_POINT ( 'NONE', #19229 ) ; +#26406 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002500, 20.06914835874664500, -28.45573375118225100 ) ) ; +#26407 = CONICAL_SURFACE ( 'NONE', #75491, 10.00000000000009600, 0.7853981633974447300 ) ; +#26408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26409 = EDGE_CURVE ( 'NONE', #40002, #16279, #43925, .T. ) ; +#26410 = VERTEX_POINT ( 'NONE', #13004 ) ; +#26411 = ORIENTED_EDGE ( 'NONE', *, *, #22137, .T. ) ; +#26412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26414 = VERTEX_POINT ( 'NONE', #44209 ) ; +#26415 = ADVANCED_FACE ( 'NONE', ( #8502 ), #70804, .T. ) ; +#26416 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 58.16666666666667100, -12.20555803803000000 ) ) ; +#26417 = ORIENTED_EDGE ( 'NONE', *, *, #8282, .T. ) ; +#26418 = ORIENTED_EDGE ( 'NONE', *, *, #51869, .F. ) ; +#26419 = ORIENTED_EDGE ( 'NONE', *, *, #40459, .F. ) ; +#26420 = VERTEX_POINT ( 'NONE', #25785 ) ; +#26421 = PLANE ( 'NONE', #2401 ) ; +#26422 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26423 = CIRCLE ( 'NONE', #9156, 9.500000000000099500 ) ; +#26424 = ORIENTED_EDGE ( 'NONE', *, *, #30039, .T. ) ; +#26425 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40044, #77301, #46259, #9010 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.216025217875882900E-017, 0.001492013864175914100 ), + .UNSPECIFIED. ) ; +#26426 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 79.94924284854739900, -28.20555803802997700 ) ) ; +#26427 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#26428 = ADVANCED_FACE ( 'NONE', ( #6580 ), #35779, .T. ) ; +#26429 = PLANE ( 'NONE', #60811 ) ; +#26430 = EDGE_CURVE ( 'NONE', #62031, #32629, #52275, .T. ) ; +#26431 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26432 = CIRCLE ( 'NONE', #29035, 10.50000000000009800 ) ; +#26433 = EDGE_LOOP ( 'NONE', ( #75301, #65866, #27651, #46880 ) ) ; +#26434 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 61.99560977511615800, -28.70555803803030800 ) ) ; +#26435 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703400, 35.98096581827316200, -28.69431509262337300 ) ) ; +#26436 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846297200, 50.79999999999999000, -28.55171188418377100 ) ) ; +#26437 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#26438 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26440 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 80.16054007504463600, -28.34042301926881200 ) ) ; +#26441 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26442 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#26443 = AXIS2_PLACEMENT_3D ( 'NONE', #50223, #13016, #56508 ) ; +#26444 = EDGE_CURVE ( 'NONE', #5295, #66808, #29531, .T. ) ; +#26445 = EDGE_CURVE ( 'NONE', #40962, #1613, #68865, .T. ) ; +#26447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27082, #39282, #51774, #70573 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318563921500, 0.001319946300100857600 ), + .UNSPECIFIED. ) ; +#26446 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 30.94069092601378700, -28.35186440610858600 ) ) ; +#26448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26449 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26450 = EDGE_CURVE ( 'NONE', #65068, #77030, #62097, .T. ) ; +#26451 = CARTESIAN_POINT ( 'NONE', ( 16.57123091997393200, 81.47225659168367400, -28.53062721603943800 ) ) ; +#26452 = AXIS2_PLACEMENT_3D ( 'NONE', #18278, #24533, #55524 ) ; +#26453 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 61.66666666666668600, 2.794441961969992100 ) ) ; +#26454 = VERTEX_POINT ( 'NONE', #7510 ) ; +#26455 = VERTEX_POINT ( 'NONE', #13804 ) ; +#26456 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#26457 = ORIENTED_EDGE ( 'NONE', *, *, #39430, .T. ) ; +#26458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26459 = CARTESIAN_POINT ( 'NONE', ( -5.148153789003687900, 55.79999999999999000, -28.37148172714570600 ) ) ; +#26460 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26461 = CARTESIAN_POINT ( 'NONE', ( -4.578849045498785100, 92.13371821560551200, -28.70555803803002000 ) ) ; +#26462 = AXIS2_PLACEMENT_3D ( 'NONE', #48205, #23498, #54744 ) ; +#26463 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#26464 = EDGE_CURVE ( 'NONE', #146, #22562, #10493, .T. ) ; +#26465 = AXIS2_PLACEMENT_3D ( 'NONE', #50274, #68549, #6792 ) ; +#26466 = FACE_OUTER_BOUND ( 'NONE', #6104, .T. ) ; +#26467 = ORIENTED_EDGE ( 'NONE', *, *, #79746, .T. ) ; +#26468 = VERTEX_POINT ( 'NONE', #32283 ) ; +#26469 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484629900, 71.37838321498817600, -28.29547179040443400 ) ) ; +#26470 = FACE_OUTER_BOUND ( 'NONE', #70048, .T. ) ; +#26471 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#26472 = EDGE_LOOP ( 'NONE', ( #5074, #57330, #32799, #55923 ) ) ; +#26473 = VERTEX_POINT ( 'NONE', #38769 ) ; +#26474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26475 = ORIENTED_EDGE ( 'NONE', *, *, #8985, .T. ) ; +#26476 = EDGE_CURVE ( 'NONE', #25461, #15406, #4632, .T. ) ; +#26477 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 26.83333333333335000, -3.349151577478984600 ) ) ; +#26478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26479 = EDGE_LOOP ( 'NONE', ( #47641, #38842, #74932, #63903 ) ) ; +#26480 = EDGE_LOOP ( 'NONE', ( #37893, #76797, #61379, #4474, #17560, #73803 ) ) ; +#26481 = AXIS2_PLACEMENT_3D ( 'NONE', #15167, #52395, #70919 ) ; +#26482 = AXIS2_PLACEMENT_3D ( 'NONE', #61027, #67256, #17502 ) ; +#26483 = CIRCLE ( 'NONE', #32752, 10.50000000000009200 ) ; +#26484 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344323300, 17.92298334620759800, -28.20555803802994200 ) ) ; +#26485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50774, #75816, #13832, #57326 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390012246100E-007, 0.0008082646680356960400 ), + .UNSPECIFIED. ) ; +#26486 = ADVANCED_FACE ( 'NONE', ( #2649 ), #64996, .T. ) ; +#26487 = LINE ( 'NONE', #54997, #53693 ) ; +#26488 = ORIENTED_EDGE ( 'NONE', *, *, #77056, .T. ) ; +#26489 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#26490 = ORIENTED_EDGE ( 'NONE', *, *, #65766, .F. ) ; +#26491 = AXIS2_PLACEMENT_3D ( 'NONE', #20029, #38464, #38727 ) ; +#26492 = VERTEX_POINT ( 'NONE', #70063 ) ; +#26493 = ORIENTED_EDGE ( 'NONE', *, *, #53798, .F. ) ; +#26494 = FACE_OUTER_BOUND ( 'NONE', #79017, .T. ) ; +#26495 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 71.82440674572720200, -28.45987523529583300 ) ) ; +#26496 = ORIENTED_EDGE ( 'NONE', *, *, #66252, .F. ) ; +#26497 = CONICAL_SURFACE ( 'NONE', #65468, 10.50000000000009600, 0.7853981633974500600 ) ; +#26498 = ADVANCED_FACE ( 'NONE', ( #66927 ), #31886, .T. ) ; +#26499 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, -1.833333333333333000, -4.152999154772358800 ) ) ; +#26500 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12374, #18613, #62138, #24873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447083145400E-007, 0.0002745498510224791700 ), + .UNSPECIFIED. ) ; +#26501 = AXIS2_PLACEMENT_3D ( 'NONE', #8662, #64753, #39962 ) ; +#26502 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344307300, 31.17701665379242100, -28.20555803802996000 ) ) ; +#26503 = CONICAL_SURFACE ( 'NONE', #43491, 10.00000000000009400, 0.7853981633974447300 ) ; +#26504 = ORIENTED_EDGE ( 'NONE', *, *, #74277, .F. ) ; +#26506 = EDGE_LOOP ( 'NONE', ( #35746, #41920, #13903, #72970 ) ) ; +#26505 = ADVANCED_FACE ( 'NONE', ( #33820 ), #79568, .T. ) ; +#26507 = CARTESIAN_POINT ( 'NONE', ( 11.72239160521212200, 50.54999999999991200, -28.70555803803027900 ) ) ; +#26508 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310635600, 71.49769010897038900, -28.61774594594309600 ) ) ; +#26509 = CARTESIAN_POINT ( 'NONE', ( 2.997971278275734600, 20.31091476818470900, -28.25432823872343100 ) ) ; +#26510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26511 = CARTESIAN_POINT ( 'NONE', ( 11.30404578338976400, 60.13716795162665100, -28.48697406221639000 ) ) ; +#26512 = AXIS2_PLACEMENT_3D ( 'NONE', #33187, #76694, #39429 ) ; +#26513 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343285200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#26514 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24552, #68065, #74343, #37035 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571867900, 0.0008043487657982455400 ), + .UNSPECIFIED. ) ; +#26515 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#26516 = ADVANCED_FACE ( 'NONE', ( #48388 ), #46422, .F. ) ; +#26517 = CARTESIAN_POINT ( 'NONE', ( -9.716823492901017500, 18.06267502090533800, -28.41043597897452600 ) ) ; +#26518 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868448300, 50.01513784120214700, -28.32821106612153600 ) ) ; +#26519 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 32.66666666666667100, 3.124568980892192800 ) ) ; +#26520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26521 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33068, #51252, #39311, #2039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061262600, 0.004414112765716567000 ), + .UNSPECIFIED. ) ; +#26522 = ORIENTED_EDGE ( 'NONE', *, *, #75367, .T. ) ; +#26523 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#26524 = VERTEX_POINT ( 'NONE', #26841 ) ; +#26525 = ADVANCED_FACE ( 'NONE', ( #50330 ), #13401, .F. ) ; +#26526 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#26527 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26528 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596600, 26.44142842854297700, -28.37229765499275700 ) ) ; +#26529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26530 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#26532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43281, #11783, #49256, #6052 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925616166200E-007, 0.0004431156063177073600 ), + .UNSPECIFIED. ) ; +#26531 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#26533 = ORIENTED_EDGE ( 'NONE', *, *, #8877, .T. ) ; +#26534 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#26535 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.65857157145702400, -28.20555803802997700 ) ) ; +#26536 = CIRCLE ( 'NONE', #78876, 10.00000000000009200 ) ; +#26537 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#26538 = ORIENTED_EDGE ( 'NONE', *, *, #45429, .T. ) ; +#26539 = FACE_OUTER_BOUND ( 'NONE', #59955, .T. ) ; +#26540 = EDGE_LOOP ( 'NONE', ( #3603, #63858, #66585, #18831, #59546 ) ) ; +#26541 = EDGE_CURVE ( 'NONE', #73072, #29698, #15021, .T. ) ; +#26542 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 33.15857157145700300, -28.20555803802996700 ) ) ; +#26543 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 17.91070809551053200, -28.20555803802992800 ) ) ; +#26544 = ORIENTED_EDGE ( 'NONE', *, *, #70957, .F. ) ; +#26545 = CIRCLE ( 'NONE', #69789, 10.00000000000009200 ) ; +#26546 = EDGE_CURVE ( 'NONE', #45954, #46957, #543, .T. ) ; +#26548 = VERTEX_POINT ( 'NONE', #33351 ) ; +#26547 = CARTESIAN_POINT ( 'NONE', ( 10.53052054780199700, 91.59999999999999400, -28.70555803803024400 ) ) ; +#26549 = VERTEX_POINT ( 'NONE', #76865 ) ; +#26550 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26552 = ORIENTED_EDGE ( 'NONE', *, *, #23744, .F. ) ; +#26553 = ORIENTED_EDGE ( 'NONE', *, *, #10971, .T. ) ; +#26554 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 30.85277818615432100, -28.70555803802999200 ) ) ; +#26555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26556 = CONICAL_SURFACE ( 'NONE', #4049, 10.50000000000009600, 0.7853981633974500600 ) ; +#26557 = EDGE_CURVE ( 'NONE', #69763, #2167, #29968, .T. ) ; +#26558 = EDGE_CURVE ( 'NONE', #17606, #65965, #19218, .T. ) ; +#26559 = ORIENTED_EDGE ( 'NONE', *, *, #20005, .T. ) ; +#26560 = AXIS2_PLACEMENT_3D ( 'NONE', #11884, #55365, #18128 ) ; +#26561 = CYLINDRICAL_SURFACE ( 'NONE', #24872, 10.00000000000000000 ) ; +#26562 = ORIENTED_EDGE ( 'NONE', *, *, #12364, .T. ) ; +#26563 = VERTEX_POINT ( 'NONE', #76591 ) ; +#26564 = ORIENTED_EDGE ( 'NONE', *, *, #66700, .T. ) ; +#26565 = ORIENTED_EDGE ( 'NONE', *, *, #74316, .F. ) ; +#26566 = CONICAL_SURFACE ( 'NONE', #33510, 10.50000000000009600, 0.7853981633974500600 ) ; +#26567 = EDGE_LOOP ( 'NONE', ( #74095, #68891, #74128 ) ) ; +#26568 = FACE_OUTER_BOUND ( 'NONE', #1539, .T. ) ; +#26569 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 4.166666666666675000, 3.794441961969996900 ) ) ; +#26570 = AXIS2_PLACEMENT_3D ( 'NONE', #40055, #2773, #46274 ) ; +#26571 = EDGE_CURVE ( 'NONE', #42022, #69303, #66902, .T. ) ; +#26572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26573 = EDGE_CURVE ( 'NONE', #6237, #7865, #52387, .T. ) ; +#26574 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16685, #53928, #60218, #22934 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854462600, 0.0007596411030281088600 ), + .UNSPECIFIED. ) ; +#26575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26576 = EDGE_CURVE ( 'NONE', #68193, #42164, #711, .T. ) ; +#26577 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26578 = AXIS2_PLACEMENT_3D ( 'NONE', #3128, #46637, #9394 ) ; +#26579 = ORIENTED_EDGE ( 'NONE', *, *, #10928, .F. ) ; +#26580 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000400, 101.5999999999999900, -18.70555803802999200 ) ) ; +#26581 = AXIS2_PLACEMENT_3D ( 'NONE', #29588, #73090, #35813 ) ; +#26582 = FACE_OUTER_BOUND ( 'NONE', #39306, .T. ) ; +#26583 = ORIENTED_EDGE ( 'NONE', *, *, #8039, .T. ) ; +#26584 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671074900, 89.66414768973952200, -28.38420446581350700 ) ) ; +#26585 = CONICAL_SURFACE ( 'NONE', #70175, 10.50000000000009600, 0.7853981633974500600 ) ; +#26586 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462657100, 61.25732391202388500, -28.20555803803014400 ) ) ; +#26587 = AXIS2_PLACEMENT_3D ( 'NONE', #37936, #62725, #6944 ) ; +#26588 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846313600, 60.79999999999999000, -28.55171188418376400 ) ) ; +#26589 = EDGE_CURVE ( 'NONE', #35058, #78600, #37945, .T. ) ; +#26590 = AXIS2_PLACEMENT_3D ( 'NONE', #43691, #6453, #49936 ) ; +#26591 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26592 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274328800, 71.29377171558718400, -28.24172590004390000 ) ) ; +#26593 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 70.16054007504466500, -28.34042301926881500 ) ) ; +#26594 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26595 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 81.65075715145215400, -28.20555803803047800 ) ) ; +#26596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26597 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.79999999999951400, -28.20555803803047800 ) ) ; +#26598 = ADVANCED_FACE ( 'NONE', ( #77601 ), #11444, .T. ) ; +#26599 = ORIENTED_EDGE ( 'NONE', *, *, #67631, .T. ) ; +#26600 = AXIS2_PLACEMENT_3D ( 'NONE', #38860, #45091, #76143 ) ; +#26601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26602 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#26603 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345621900, 51.32559822014160000, -28.29986836858037000 ) ) ; +#26605 = ORIENTED_EDGE ( 'NONE', *, *, #44219, .T. ) ; +#26604 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#26606 = ADVANCED_FACE ( 'NONE', ( #44460 ), #59099, .F. ) ; +#26607 = CARTESIAN_POINT ( 'NONE', ( 3.778746597914921100, 28.66476742015636200, -28.30311934730015700 ) ) ; +#26608 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4934, #42167, #17454, #60984 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460910753631700E-007, 0.0008482521192571711600 ), + .UNSPECIFIED. ) ; +#26609 = ADVANCED_FACE ( 'NONE', ( #28010 ), #26039, .T. ) ; +#26610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26611 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26612 = CONICAL_SURFACE ( 'NONE', #20955, 10.00000000000009600, 0.7853981633974482800 ) ; +#26613 = AXIS2_PLACEMENT_3D ( 'NONE', #33738, #77247, #39985 ) ; +#26614 = ORIENTED_EDGE ( 'NONE', *, *, #30246, .F. ) ; +#26615 = FACE_OUTER_BOUND ( 'NONE', #851, .T. ) ; +#26616 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26617 = VERTEX_POINT ( 'NONE', #62606 ) ; +#26618 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 10.00000000000000900, -1.205558038030005300 ) ) ; +#26619 = CARTESIAN_POINT ( 'NONE', ( 15.16277716586359900, 9.918611417068206000, -28.70456437345707100 ) ) ; +#26620 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265453400, 81.32559822014134500, -28.29986836858039800 ) ) ; +#26621 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 90.16054007504432400, -28.34042301926905700 ) ) ; +#26622 = CIRCLE ( 'NONE', #19940, 10.00000000000009600 ) ; +#26623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9672, #53173, #28487, #71980 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259905723000E-007, 0.0004559721492004767500 ), + .UNSPECIFIED. ) ; +#26624 = ORIENTED_EDGE ( 'NONE', *, *, #42703, .T. ) ; +#26625 = ORIENTED_EDGE ( 'NONE', *, *, #27126, .F. ) ; +#26626 = CARTESIAN_POINT ( 'NONE', ( 3.511721523937724000, 9.414547318481435700, -28.68840635393010500 ) ) ; +#26627 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26628 = AXIS2_PLACEMENT_3D ( 'NONE', #69027, #13018, #43966 ) ; +#26629 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034431400, 49.42298334620755200, -28.20555803802997400 ) ) ; +#26630 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26631 = CIRCLE ( 'NONE', #12886, 9.500000000000097700 ) ; +#26632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26633 = EDGE_CURVE ( 'NONE', #61209, #71627, #23518, .T. ) ; +#26634 = CONICAL_SURFACE ( 'NONE', #66003, 10.50000000000009600, 0.7853981633974500600 ) ; +#26635 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159371900, 29.69809558586063100, -28.70555803803001600 ) ) ; +#26636 = ORIENTED_EDGE ( 'NONE', *, *, #14427, .T. ) ; +#26637 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26638 = CIRCLE ( 'NONE', #46160, 10.00000000000009200 ) ; +#26639 = AXIS2_PLACEMENT_3D ( 'NONE', #50314, #13111, #56598 ) ; +#26640 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26641 = ORIENTED_EDGE ( 'NONE', *, *, #19011, .T. ) ; +#26642 = EDGE_LOOP ( 'NONE', ( #8479, #79404, #29321, #73269, #36664 ) ) ; +#26643 = ORIENTED_EDGE ( 'NONE', *, *, #55562, .F. ) ; +#26644 = VERTEX_POINT ( 'NONE', #37824 ) ; +#26645 = LINE ( 'NONE', #62998, #43152 ) ; +#26646 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#26647 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#26648 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18641, #55888, #68407, #31171 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549254487900E-007, 0.0008759529789574159400 ), + .UNSPECIFIED. ) ; +#26649 = ORIENTED_EDGE ( 'NONE', *, *, #32863, .T. ) ; +#26650 = EDGE_CURVE ( 'NONE', #75458, #60081, #61084, .T. ) ; +#26651 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26653 = ORIENTED_EDGE ( 'NONE', *, *, #26307, .T. ) ; +#26654 = CIRCLE ( 'NONE', #30507, 10.00000000000009400 ) ; +#26655 = EDGE_CURVE ( 'NONE', #21477, #26473, #9009, .T. ) ; +#26656 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 53.66666666666668600, -5.535685056952199400 ) ) ; +#26657 = CARTESIAN_POINT ( 'NONE', ( -2.373691282604830200, 92.65850107289585900, -28.66333578723705600 ) ) ; +#26658 = EDGE_CURVE ( 'NONE', #31596, #7612, #15330, .T. ) ; +#26659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17299, #42297, #5596, #49077 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723709900, 0.0008252574424211173500 ), + .UNSPECIFIED. ) ; +#26660 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26661 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 18.66666666666667900, -8.133761268305512700 ) ) ; +#26662 = EDGE_CURVE ( 'NONE', #25185, #70697, #75356, .T. ) ; +#26663 = AXIS2_PLACEMENT_3D ( 'NONE', #6254, #49733, #12529 ) ; +#26664 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 50.90033558196089600, -28.70555803803014400 ) ) ; +#26665 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729965800, 71.58737389638834300, -28.29936525552484700 ) ) ; +#26666 = FACE_OUTER_BOUND ( 'NONE', #71332, .T. ) ; +#26667 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609170600, 80.13716795162640900, -28.48697406221692000 ) ) ; +#26668 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 56.00000000000000700, 9.794441961969996100 ) ) ; +#26669 = CARTESIAN_POINT ( 'NONE', ( 3.121412514500165400, 81.76337688193805800, -28.37223523914927600 ) ) ; +#26670 = ORIENTED_EDGE ( 'NONE', *, *, #69168, .F. ) ; +#26671 = AXIS2_PLACEMENT_3D ( 'NONE', #46204, #8946, #52462 ) ; +#26673 = ORIENTED_EDGE ( 'NONE', *, *, #80247, .F. ) ; +#26672 = EDGE_CURVE ( 'NONE', #10425, #23088, #60925, .T. ) ; +#26674 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26675 = EDGE_CURVE ( 'NONE', #11374, #59892, #63024, .T. ) ; +#26676 = EDGE_CURVE ( 'NONE', #11162, #359, #17279, .T. ) ; +#26677 = ORIENTED_EDGE ( 'NONE', *, *, #80507, .F. ) ; +#26678 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000027200, 82.97376207874987100, -28.70555803803047500 ) ) ; +#26679 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#26680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26681 = CONICAL_SURFACE ( 'NONE', #29799, 10.00000000000009200, 0.7853981633974447300 ) ; +#26682 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#26683 = VERTEX_POINT ( 'NONE', #7343 ) ; +#26684 = FACE_OUTER_BOUND ( 'NONE', #52137, .T. ) ; +#26685 = VERTEX_POINT ( 'NONE', #38612 ) ; +#26686 = AXIS2_PLACEMENT_3D ( 'NONE', #17431, #60954, #23698 ) ; +#26687 = CARTESIAN_POINT ( 'NONE', ( 3.628494729608128900, 81.43250300240214300, -28.25053119339298000 ) ) ; +#26688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26689 = ORIENTED_EDGE ( 'NONE', *, *, #42235, .T. ) ; +#26690 = CIRCLE ( 'NONE', #67832, 10.50000000000009800 ) ; +#26691 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26692 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 67.46443389862717800, -28.54207364681943200 ) ) ; +#26693 = CIRCLE ( 'NONE', #79456, 10.50000000000009600 ) ; +#26694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17330, #60870, #23604, #67104 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073965018400, 0.0005839769583133804100 ), + .UNSPECIFIED. ) ; +#26695 = ORIENTED_EDGE ( 'NONE', *, *, #28844, .T. ) ; +#26696 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346247200, 81.39409401757626500, -28.39369363572360400 ) ) ; +#26697 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .F. ) ; +#26698 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26699 = EDGE_CURVE ( 'NONE', #49628, #7032, #46392, .T. ) ; +#26701 = ORIENTED_EDGE ( 'NONE', *, *, #38115, .F. ) ; +#26700 = PLANE ( 'NONE', #58692 ) ; +#26702 = ADVANCED_FACE ( 'NONE', ( #75648 ), #7494, .T. ) ; +#26703 = AXIS2_PLACEMENT_3D ( 'NONE', #73294, #36024, #79541 ) ; +#26704 = AXIS2_PLACEMENT_3D ( 'NONE', #35827, #79352, #42061 ) ; +#26705 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686885200, 70.01994747561639100, -28.24986299608865200 ) ) ; +#26706 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040400, 61.43250300240213600, -28.20555803803014400 ) ) ; +#26707 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 20.43250300240229200, -28.20555803802995200 ) ) ; +#26708 = CIRCLE ( 'NONE', #14875, 10.50000000000009200 ) ; +#26709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26710 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009100, 15.94142842854307000, -28.20555803802992800 ) ) ; +#26711 = EDGE_LOOP ( 'NONE', ( #20385, #58152, #3579 ) ) ; +#26712 = CONICAL_SURFACE ( 'NONE', #73263, 10.00000000000009400, 0.7853981633974447300 ) ; +#26713 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 59.50000000000002100, -7.061964498581016200 ) ) ; +#26714 = VERTEX_POINT ( 'NONE', #63693 ) ; +#26715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26716 = ORIENTED_EDGE ( 'NONE', *, *, #56626, .T. ) ; +#26717 = EDGE_LOOP ( 'NONE', ( #12261, #53940, #57434, #15548, #69987 ) ) ; +#26718 = EDGE_LOOP ( 'NONE', ( #59219, #64465, #61300, #5357 ) ) ; +#26719 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26720 = ORIENTED_EDGE ( 'NONE', *, *, #51022, .F. ) ; +#26721 = FACE_OUTER_BOUND ( 'NONE', #67789, .T. ) ; +#26722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26723 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26724 = AXIS2_PLACEMENT_3D ( 'NONE', #66205, #28982, #72467 ) ; +#26725 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26726 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408174000, 71.21413374642163800, -28.27331438134786600 ) ) ; +#26727 = ADVANCED_FACE ( 'NONE', ( #40596 ), #55197, .F. ) ; +#26728 = VERTEX_POINT ( 'NONE', #38875 ) ; +#26729 = ORIENTED_EDGE ( 'NONE', *, *, #64118, .T. ) ; +#26730 = AXIS2_PLACEMENT_3D ( 'NONE', #27140, #70637, #33378 ) ; +#26731 = CARTESIAN_POINT ( 'NONE', ( 3.778746597914922400, 39.16476742015635900, -28.30311934730016800 ) ) ; +#26732 = ORIENTED_EDGE ( 'NONE', *, *, #62144, .T. ) ; +#26733 = ORIENTED_EDGE ( 'NONE', *, *, #14270, .F. ) ; +#26734 = EDGE_CURVE ( 'NONE', #61776, #68102, #71773, .T. ) ; +#26735 = FACE_OUTER_BOUND ( 'NONE', #30148, .T. ) ; +#26736 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180654400, 61.65075715145295700, -28.20555803803014100 ) ) ; +#26737 = AXIS2_PLACEMENT_3D ( 'NONE', #23255, #54241, #60535 ) ; +#26738 = CARTESIAN_POINT ( 'NONE', ( -16.56790757632392200, 15.22927195446096200, -28.58363361004981200 ) ) ; +#26739 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 24.66666666666668200, 2.794441961969992100 ) ) ; +#26740 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26741 = AXIS2_PLACEMENT_3D ( 'NONE', #43530, #6293, #49776 ) ; +#26742 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883543500, 39.20564881207762700, -28.41114655922299200 ) ) ; +#26743 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1501, #44988, #20289, #63817 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656170785700, 0.001370301364302599600 ), + .UNSPECIFIED. ) ; +#26744 = AXIS2_PLACEMENT_3D ( 'NONE', #61710, #67683, #24436 ) ; +#26745 = FACE_OUTER_BOUND ( 'NONE', #20946, .T. ) ; +#26746 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.79999999999951400, -28.20555803803047800 ) ) ; +#26747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26748 = ORIENTED_EDGE ( 'NONE', *, *, #73104, .T. ) ; +#26749 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#26750 = ORIENTED_EDGE ( 'NONE', *, *, #20156, .T. ) ; +#26751 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#26752 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, -3.999999999999985300, -1.205558038030002800 ) ) ; +#26753 = CIRCLE ( 'NONE', #7811, 10.00000000000009200 ) ; +#26754 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#26755 = CIRCLE ( 'NONE', #54924, 9.500000000000097700 ) ; +#26756 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#26758 = EDGE_CURVE ( 'NONE', #2153, #1001, #42543, .T. ) ; +#26757 = EDGE_LOOP ( 'NONE', ( #35596, #10240, #37588, #80139 ) ) ; +#26759 = EDGE_CURVE ( 'NONE', #38144, #62129, #31982, .T. ) ; +#26760 = VECTOR ( 'NONE', #33108, 1000.000000000000000 ) ; +#26761 = FACE_OUTER_BOUND ( 'NONE', #45716, .T. ) ; +#26762 = ORIENTED_EDGE ( 'NONE', *, *, #7937, .F. ) ; +#26763 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#26764 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26765 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 81.65075715145280800, -28.20555803802997700 ) ) ; +#26766 = EDGE_LOOP ( 'NONE', ( #78581, #58521, #67077 ) ) ; +#26767 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 80.34267608797603100, -28.20555803802997700 ) ) ; +#26768 = EDGE_CURVE ( 'NONE', #70930, #53113, #17534, .T. ) ; +#26769 = CARTESIAN_POINT ( 'NONE', ( 10.29582285685833100, 9.519451428761129800, -28.52576311647842300 ) ) ; +#26770 = ADVANCED_FACE ( 'NONE', ( #57165 ), #69790, .T. ) ; +#26771 = LINE ( 'NONE', #70761, #12175 ) ; +#26772 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 5.000000000000534700, -19.32050998661224400 ) ) ; +#26773 = ORIENTED_EDGE ( 'NONE', *, *, #64461, .T. ) ; +#26774 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#26775 = EDGE_CURVE ( 'NONE', #61295, #23151, #3032, .T. ) ; +#26777 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 30.50000000000001400, -4.865812075874393000 ) ) ; +#26776 = FACE_OUTER_BOUND ( 'NONE', #27619, .T. ) ; +#26778 = EDGE_CURVE ( 'NONE', #6862, #30431, #69359, .T. ) ; +#26779 = ORIENTED_EDGE ( 'NONE', *, *, #38516, .F. ) ; +#26780 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000460100, 18.16749699759770200, -28.20555803803009500 ) ) ; +#26781 = ORIENTED_EDGE ( 'NONE', *, *, #34656, .F. ) ; +#26782 = ORIENTED_EDGE ( 'NONE', *, *, #10955, .T. ) ; +#26783 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76394, #70134, #13869, #39109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200790122300, 0.0008866563355347468900 ), + .UNSPECIFIED. ) ; +#26784 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#26785 = ORIENTED_EDGE ( 'NONE', *, *, #50249, .F. ) ; +#26786 = CARTESIAN_POINT ( 'NONE', ( -16.19858693502878200, 94.72249899919930300, -28.20555803802997700 ) ) ; +#26787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26788 = ADVANCED_FACE ( 'NONE', ( #38624 ), #36700, .T. ) ; +#26789 = CONICAL_SURFACE ( 'NONE', #17297, 10.50000000000009900, 0.7853981633974518300 ) ; +#26790 = CARTESIAN_POINT ( 'NONE', ( 2.997971278275733300, 30.81091476818470600, -28.25432823872344200 ) ) ; +#26791 = VERTEX_POINT ( 'NONE', #39709 ) ; +#26792 = AXIS2_PLACEMENT_3D ( 'NONE', #62612, #19077, #37828 ) ; +#26793 = EDGE_CURVE ( 'NONE', #34665, #65938, #22122, .T. ) ; +#26794 = EDGE_CURVE ( 'NONE', #19038, #20495, #5569, .T. ) ; +#26795 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26796 = EDGE_CURVE ( 'NONE', #18567, #61776, #73719, .T. ) ; +#26797 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26798 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346246800, 60.20590598242372200, -28.39369363572360800 ) ) ; +#26799 = ORIENTED_EDGE ( 'NONE', *, *, #51993, .F. ) ; +#26800 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26802 = AXIS2_PLACEMENT_3D ( 'NONE', #60764, #23487, #48193 ) ; +#26803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26804 = EDGE_LOOP ( 'NONE', ( #53294, #39476, #55959, #6915, #33288, #29858, #37218, #41055 ) ) ; +#26805 = ADVANCED_FACE ( 'NONE', ( #53248 ), #34783, .T. ) ; +#26806 = CIRCLE ( 'NONE', #6419, 10.00000000000009200 ) ; +#26807 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000003600, 59.81066373133501200, -28.53923937255172700 ) ) ; +#26808 = CARTESIAN_POINT ( 'NONE', ( -9.071428571427407700, 41.52858243452166700, -28.70555803802997700 ) ) ; +#26809 = AXIS2_PLACEMENT_3D ( 'NONE', #75872, #38571, #1330 ) ; +#26810 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26811 = AXIS2_PLACEMENT_3D ( 'NONE', #40929, #3648, #47148 ) ; +#26812 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#26813 = AXIS2_PLACEMENT_3D ( 'NONE', #10812, #54316, #17072 ) ; +#26814 = ADVANCED_FACE ( 'NONE', ( #24083 ), #1649, .T. ) ; +#26815 = CIRCLE ( 'NONE', #28299, 9.500000000000097700 ) ; +#26816 = ORIENTED_EDGE ( 'NONE', *, *, #42049, .F. ) ; +#26817 = ORIENTED_EDGE ( 'NONE', *, *, #9226, .T. ) ; +#26818 = CIRCLE ( 'NONE', #72389, 10.00000000000009400 ) ; +#26819 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 2.000000000000018700, -6.205558038030003100 ) ) ; +#26820 = AXIS2_PLACEMENT_3D ( 'NONE', #7886, #76160, #57406 ) ; +#26821 = EDGE_CURVE ( 'NONE', #48354, #63031, #20178, .T. ) ; +#26822 = VERTEX_POINT ( 'NONE', #71268 ) ; +#26823 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#26824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26825 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.93250300240229200, -28.20555803802996700 ) ) ; +#26826 = FACE_OUTER_BOUND ( 'NONE', #62852, .T. ) ; +#26827 = CONICAL_SURFACE ( 'NONE', #5372, 10.50000000000009600, 0.7853981633974500600 ) ; +#26828 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ; +#26829 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 34.09761904761919700, -28.70555803802995200 ) ) ; +#26831 = EDGE_CURVE ( 'NONE', #51106, #73531, #54907, .T. ) ; +#26830 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72359, #28872, #41315, #4059 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697999291100E-007, 0.0008724363063898935800 ), + .UNSPECIFIED. ) ; +#26832 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 71.08083798124323500, -28.45106778992441600 ) ) ; +#26833 = FACE_OUTER_BOUND ( 'NONE', #24160, .T. ) ; +#26834 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ; +#26835 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25744, #75488, #57009, #19743 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.687771955061189700E-017, 0.001246264537621139800 ), + .UNSPECIFIED. ) ; +#26836 = ORIENTED_EDGE ( 'NONE', *, *, #8962, .T. ) ; +#26837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26838 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#26839 = CARTESIAN_POINT ( 'NONE', ( 3.778842085587716500, 30.93523632220587800, -28.30315276798566200 ) ) ; +#26840 = CONICAL_SURFACE ( 'NONE', #79575, 10.00000000000009200, 0.7853981633974447300 ) ; +#26841 = CARTESIAN_POINT ( 'NONE', ( -11.72239160521347200, 50.54999999999999700, -28.70555803802997400 ) ) ; +#26842 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019283600, 74.80000000000001100, -28.70555803802997700 ) ) ; +#26843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29843, #67063, #79576, #42281 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387974661900E-007, 0.0007987676590766457200 ), + .UNSPECIFIED. ) ; +#26846 = CIRCLE ( 'NONE', #15829, 10.00000000000009200 ) ; +#26847 = ORIENTED_EDGE ( 'NONE', *, *, #76582, .F. ) ; +#26848 = AXIS2_PLACEMENT_3D ( 'NONE', #14771, #21041, #51985 ) ; +#26849 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950492900, 49.19228657120675800, -28.53891855579986700 ) ) ; +#26850 = ORIENTED_EDGE ( 'NONE', *, *, #62888, .F. ) ; +#26851 = ORIENTED_EDGE ( 'NONE', *, *, #26778, .T. ) ; +#26852 = ORIENTED_EDGE ( 'NONE', *, *, #57994, .F. ) ; +#26853 = PLANE ( 'NONE', #25637 ) ; +#26854 = ORIENTED_EDGE ( 'NONE', *, *, #74147, .F. ) ; +#26855 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.15857157145700800, -28.20555803802994200 ) ) ; +#26856 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26857 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708531400, 55.80000000000008200, -28.63843632546336300 ) ) ; +#26858 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825500, 51.93585231025955600, -28.38420446581291400 ) ) ; +#26859 = VERTEX_POINT ( 'NONE', #34279 ) ; +#26860 = CONICAL_SURFACE ( 'NONE', #467, 10.50000000000009800, 0.7853981633974500600 ) ; +#26861 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26862 = ORIENTED_EDGE ( 'NONE', *, *, #1228, .T. ) ; +#26863 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#26864 = AXIS2_PLACEMENT_3D ( 'NONE', #14403, #51081, #45361 ) ; +#26865 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33443, #20959, #2421, #45925 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576353100 ), + .UNSPECIFIED. ) ; +#26866 = VERTEX_POINT ( 'NONE', #21774 ) ; +#26867 = ADVANCED_FACE ( 'NONE', ( #9453 ), #32792, .T. ) ; +#26868 = CARTESIAN_POINT ( 'NONE', ( 11.18653997827033200, 6.877501000802047000, -28.20555803803042500 ) ) ; +#26869 = ORIENTED_EDGE ( 'NONE', *, *, #43412, .T. ) ; +#26870 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#26871 = FACE_OUTER_BOUND ( 'NONE', #26286, .T. ) ; +#26872 = ORIENTED_EDGE ( 'NONE', *, *, #16295, .T. ) ; +#26873 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 33.17681279774500100, -28.70555803802996700 ) ) ; +#26874 = EDGE_CURVE ( 'NONE', #29390, #79524, #40445, .T. ) ; +#26875 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 7.833333333333348100, -3.349151577478984600 ) ) ; +#26876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26877 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26878 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345327100, 81.32559822014171400, -28.29986836858038400 ) ) ; +#26879 = ORIENTED_EDGE ( 'NONE', *, *, #11744, .F. ) ; +#26880 = CONICAL_SURFACE ( 'NONE', #66841, 10.00000000000009200, 0.7853981633974415100 ) ; +#26881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26882 = ADVANCED_FACE ( 'NONE', ( #51250 ), #80508, .T. ) ; +#26883 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180450100, 61.65075715145295000, -28.20555803802997700 ) ) ; +#26884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26885 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56930, #13428, #50635, #19673 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202209797400E-007, 0.0008724366121407779300 ), + .UNSPECIFIED. ) ; +#26886 = ORIENTED_EDGE ( 'NONE', *, *, #8252, .F. ) ; +#26887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26888 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.932503002402297600, -28.20555803802994200 ) ) ; +#26889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26890 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#26891 = EDGE_CURVE ( 'NONE', #6698, #60859, #16277, .T. ) ; +#26892 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195351400, 41.91634594406195200, -28.35038903107272300 ) ) ; +#26893 = EDGE_CURVE ( 'NONE', #67971, #23113, #26022, .T. ) ; +#26894 = FACE_OUTER_BOUND ( 'NONE', #61516, .T. ) ; +#26895 = ADVANCED_FACE ( 'NONE', ( #18223 ), #30873, .F. ) ; +#26896 = CONICAL_SURFACE ( 'NONE', #26462, 10.00000000000009600, 0.7853981633974447300 ) ; +#26897 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26899 = EDGE_LOOP ( 'NONE', ( #34778, #12891, #7807, #42500, #40887 ) ) ; +#26900 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26901 = ORIENTED_EDGE ( 'NONE', *, *, #68474, .F. ) ; +#26902 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#26903 = FACE_OUTER_BOUND ( 'NONE', #79637, .T. ) ; +#26904 = AXIS2_PLACEMENT_3D ( 'NONE', #66727, #29497, #72983 ) ; +#26905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26906 = EDGE_CURVE ( 'NONE', #24063, #42914, #11547, .T. ) ; +#26907 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26908 = EDGE_CURVE ( 'NONE', #5527, #70358, #77846, .T. ) ; +#26910 = VERTEX_POINT ( 'NONE', #72364 ) ; +#26909 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#26911 = EDGE_CURVE ( 'NONE', #48339, #21218, #63410, .T. ) ; +#26912 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#26913 = ADVANCED_FACE ( 'NONE', ( #47362 ), #78576, .F. ) ; +#26914 = EDGE_CURVE ( 'NONE', #70400, #40419, #14313, .T. ) ; +#26915 = FACE_OUTER_BOUND ( 'NONE', #27228, .T. ) ; +#26916 = AXIS2_PLACEMENT_3D ( 'NONE', #59200, #21951, #65495 ) ; +#26917 = FACE_OUTER_BOUND ( 'NONE', #25297, .T. ) ; +#26918 = ORIENTED_EDGE ( 'NONE', *, *, #52600, .F. ) ; +#26919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26920 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 20.44069092601378700, -28.35186440610856500 ) ) ; +#26921 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000045300, 18.16749699759753200, -28.20555803803025800 ) ) ; +#26922 = ORIENTED_EDGE ( 'NONE', *, *, #59425, .T. ) ; +#26923 = ORIENTED_EDGE ( 'NONE', *, *, #1000, .T. ) ; +#26924 = ADVANCED_FACE ( 'NONE', ( #67856 ), #28958, .F. ) ; +#26925 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 51.50000000000001400, 2.454695999814385600 ) ) ; +#26926 = AXIS2_PLACEMENT_3D ( 'NONE', #79581, #73328, #54547 ) ; +#26927 = AXIS2_PLACEMENT_3D ( 'NONE', #9645, #53155, #15903 ) ; +#26928 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987500, 51.65075715145281500, -28.20555803802997700 ) ) ; +#26929 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26930 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147100, 71.52858243452072900, -28.70555803803030800 ) ) ; +#26931 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 16.50000000000002100, 4.650848422521016300 ) ) ; +#26932 = FACE_OUTER_BOUND ( 'NONE', #5267, .T. ) ; +#26933 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26934 = VERTEX_POINT ( 'NONE', #47819 ) ; +#26935 = CARTESIAN_POINT ( 'NONE', ( 16.63912857669164300, 29.64521310961719200, -28.57032374330296400 ) ) ; +#26936 = ORIENTED_EDGE ( 'NONE', *, *, #24750, .F. ) ; +#26937 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 72.97376207875058200, -28.70555803802997700 ) ) ; +#26938 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26939 = ORIENTED_EDGE ( 'NONE', *, *, #30631, .F. ) ; +#26940 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 53.83333333333334300, -12.20555803803000600 ) ) ; +#26941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26942 = EDGE_LOOP ( 'NONE', ( #80384, #30700, #44727 ) ) ; +#26943 = CARTESIAN_POINT ( 'NONE', ( 16.33099763933874000, 46.12682920859830900, -28.62115403300391800 ) ) ; +#26944 = CIRCLE ( 'NONE', #35986, 10.00000000000009200 ) ; +#26945 = AXIS2_PLACEMENT_3D ( 'NONE', #68502, #55975, #49692 ) ; +#26946 = ORIENTED_EDGE ( 'NONE', *, *, #58940, .F. ) ; +#26947 = EDGE_CURVE ( 'NONE', #52622, #31444, #62019, .T. ) ; +#26948 = VERTEX_POINT ( 'NONE', #10598 ) ; +#26949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26950 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528300, 14.05000000000000200, -28.20555803802992800 ) ) ; +#26951 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57486, #69725, #76250, #38960 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925616166200E-007, 0.0004084731003440425000 ), + .UNSPECIFIED. ) ; +#26952 = FACE_OUTER_BOUND ( 'NONE', #43105, .T. ) ; +#26953 = ORIENTED_EDGE ( 'NONE', *, *, #67268, .T. ) ; +#26954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26955 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#26956 = EDGE_CURVE ( 'NONE', #69606, #70054, #48892, .T. ) ; +#26957 = VERTEX_POINT ( 'NONE', #79144 ) ; +#26958 = FACE_OUTER_BOUND ( 'NONE', #13696, .T. ) ; +#26959 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855103500, 77.92318720225479500, -28.70555803802997700 ) ) ; +#26960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26961 = AXIS2_PLACEMENT_3D ( 'NONE', #61733, #80483, #43184 ) ; +#26962 = AXIS2_PLACEMENT_3D ( 'NONE', #17970, #61504, #24225 ) ; +#26963 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112237300, 20.02667319908760700, -28.37233769390177700 ) ) ; +#26964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29291, #72772, #47968, #10753 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524634016500E-007, 0.0007303749718165291600 ), + .UNSPECIFIED. ) ; +#26965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26966 = CIRCLE ( 'NONE', #7404, 10.00000000000009600 ) ; +#26967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26968 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#26969 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345560600, 70.07527064970034300, -28.39317435246179500 ) ) ; +#26970 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474191500, 10.36172549728281200, -28.47230003642276600 ) ) ; +#26971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43902, #50159, #68954, #31715 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476258306126500E-007, 0.0002670039420925205600 ), + .UNSPECIFIED. ) ; +#26972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26973 = EDGE_LOOP ( 'NONE', ( #52701, #33003, #10190 ) ) ; +#26974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26975 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#26976 = AXIS2_PLACEMENT_3D ( 'NONE', #61398, #61651, #67884 ) ; +#26977 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 57.33333333333335000, 5.722645192245503900 ) ) ; +#26978 = VECTOR ( 'NONE', #31246, 1000.000000000000000 ) ; +#26979 = ORIENTED_EDGE ( 'NONE', *, *, #29078, .F. ) ; +#26980 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#26981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30869, #61617, #37079, #80621 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100398488100, 0.001249956855170278100 ), + .UNSPECIFIED. ) ; +#26982 = CONICAL_SURFACE ( 'NONE', #10239, 10.00000000000009400, 0.7853981633974447300 ) ; +#26983 = VERTEX_POINT ( 'NONE', #73689 ) ; +#26984 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26985 = ORIENTED_EDGE ( 'NONE', *, *, #53705, .F. ) ; +#26986 = CIRCLE ( 'NONE', #9185, 10.00000000000009600 ) ; +#26987 = ADVANCED_FACE ( 'NONE', ( #49314 ), #60075, .F. ) ; +#26988 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26989 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#26990 = AXIS2_PLACEMENT_3D ( 'NONE', #31167, #37635, #50134 ) ; +#26991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26992 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274741400, 14.04999999999976300, -28.20555803803009500 ) ) ; +#26993 = EDGE_LOOP ( 'NONE', ( #28198, #1050, #27066 ) ) ; +#26994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20223, #13974, #69441, #63756 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799852743600E-007, 0.0005050252131284689600 ), + .UNSPECIFIED. ) ; +#26995 = FACE_OUTER_BOUND ( 'NONE', #32171, .T. ) ; +#26996 = EDGE_CURVE ( 'NONE', #55309, #61277, #76573, .T. ) ; +#26997 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#26998 = CIRCLE ( 'NONE', #2122, 10.00000000000009400 ) ; +#26999 = EDGE_LOOP ( 'NONE', ( #8820, #71073, #27469 ) ) ; +#27000 = ADVANCED_FACE ( 'NONE', ( #45401 ), #10417, .T. ) ; +#27001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27002 = ADVANCED_FACE ( 'NONE', ( #63982 ), #36669, .F. ) ; +#27003 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 22.49999999999999300, -7.061964498581016200 ) ) ; +#27004 = ORIENTED_EDGE ( 'NONE', *, *, #65161, .T. ) ; +#27005 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#27006 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495031800, 17.69228657120672200, -28.53891855579988100 ) ) ; +#27007 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150680800, 39.27966528189953300, -28.30868034705249800 ) ) ; +#27008 = ADVANCED_FACE ( 'NONE', ( #12376 ), #41546, .F. ) ; +#27009 = CIRCLE ( 'NONE', #68377, 9.500000000000099500 ) ; +#27011 = EDGE_CURVE ( 'NONE', #43792, #20507, #34476, .T. ) ; +#27010 = ORIENTED_EDGE ( 'NONE', *, *, #43633, .F. ) ; +#27012 = ORIENTED_EDGE ( 'NONE', *, *, #71400, .F. ) ; +#27013 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495027400, 38.69228657120672900, -28.53891855579989200 ) ) ; +#27014 = ORIENTED_EDGE ( 'NONE', *, *, #77178, .F. ) ; +#27015 = EDGE_CURVE ( 'NONE', #31957, #71810, #65921, .T. ) ; +#27016 = EDGE_LOOP ( 'NONE', ( #31692, #55875, #9842 ) ) ; +#27017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27018 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040000, 71.43250300240211500, -28.20555803803014400 ) ) ; +#27019 = ORIENTED_EDGE ( 'NONE', *, *, #51135, .F. ) ; +#27020 = EDGE_CURVE ( 'NONE', #368, #47896, #20030, .T. ) ; +#27021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27022 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53817, #10316, #60103, #22826 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520737300, 0.004414519045341082000 ), + .UNSPECIFIED. ) ; +#27023 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 30.94069092601379400, -28.35186440610857500 ) ) ; +#27024 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27025 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 66.00000000000000000, -1.205558038030005300 ) ) ; +#27026 = EDGE_CURVE ( 'NONE', #20363, #48096, #5548, .T. ) ; +#27027 = FACE_OUTER_BOUND ( 'NONE', #75821, .T. ) ; +#27028 = AXIS2_PLACEMENT_3D ( 'NONE', #12851, #56332, #19076 ) ; +#27029 = EDGE_LOOP ( 'NONE', ( #33799, #7322, #59484 ) ) ; +#27030 = ORIENTED_EDGE ( 'NONE', *, *, #26195, .F. ) ; +#27031 = VERTEX_POINT ( 'NONE', #49683 ) ; +#27032 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650648400, 18.08087956867532500, -28.30223257055579100 ) ) ; +#27033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27034 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 41.61077422949657000, -28.37255355648634500 ) ) ; +#27035 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27037 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471864200, 20.46868088498121800, -28.51286550264509900 ) ) ; +#27036 = FACE_OUTER_BOUND ( 'NONE', #67032, .T. ) ; +#27038 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#27039 = AXIS2_PLACEMENT_3D ( 'NONE', #38705, #1468, #44946 ) ; +#27040 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#27041 = PLANE ( 'NONE', #9864 ) ; +#27043 = ORIENTED_EDGE ( 'NONE', *, *, #18180, .F. ) ; +#27042 = EDGE_CURVE ( 'NONE', #64964, #25889, #71877, .T. ) ; +#27044 = EDGE_CURVE ( 'NONE', #45946, #34605, #57397, .T. ) ; +#27045 = AXIS2_PLACEMENT_3D ( 'NONE', #67497, #30275, #73774 ) ; +#27046 = CARTESIAN_POINT ( 'NONE', ( -23.43661076327820300, 1.563389236721507600, -24.36555300396192400 ) ) ; +#27047 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27048 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 28.33333333333334600, 1.294441961969997200 ) ) ; +#27049 = CONICAL_SURFACE ( 'NONE', #21366, 10.50000000000009600, 0.7853981633974500600 ) ; +#27050 = ORIENTED_EDGE ( 'NONE', *, *, #45069, .T. ) ; +#27051 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#27052 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27054 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 87.94142842854296300, -28.20555803802997700 ) ) ; +#27055 = ORIENTED_EDGE ( 'NONE', *, *, #61340, .F. ) ; +#27056 = EDGE_CURVE ( 'NONE', #70708, #39227, #74651, .T. ) ; +#27057 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830878500, 51.64954451135938000, -28.33400579219035700 ) ) ; +#27058 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312769300, 20.49769010897089000, -28.61774594593775900 ) ) ; +#27059 = FACE_OUTER_BOUND ( 'NONE', #5795, .T. ) ; +#27060 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489671700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#27061 = AXIS2_PLACEMENT_3D ( 'NONE', #47287, #66111, #59857 ) ; +#27062 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#27063 = AXIS2_PLACEMENT_3D ( 'NONE', #70250, #51453, #39231 ) ; +#27064 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185600, 30.96868088498122200, -28.51286550264512000 ) ) ; +#27065 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67201, #23697, #79708, #42415 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936601600, 0.0005776948474817128600 ), + .UNSPECIFIED. ) ; +#27066 = ORIENTED_EDGE ( 'NONE', *, *, #63359, .F. ) ; +#27067 = CARTESIAN_POINT ( 'NONE', ( 10.24297557446587900, 70.16517473503360200, -28.29551658696724200 ) ) ; +#27068 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826461100, 71.64948861668521800, -28.33414295261598400 ) ) ; +#27069 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27070 = CARTESIAN_POINT ( 'NONE', ( 9.421150954501216600, 92.13371821560551200, -28.70555803803002000 ) ) ; +#27071 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27072 = FACE_OUTER_BOUND ( 'NONE', #58041, .T. ) ; +#27073 = ORIENTED_EDGE ( 'NONE', *, *, #57015, .F. ) ; +#27074 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019300500, 64.79999999999927200, -28.70555803803047500 ) ) ; +#27075 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#27076 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2472, #45977, #21274, #64810 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#27077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27078 = AXIS2_PLACEMENT_3D ( 'NONE', #60545, #66784, #29556 ) ; +#27079 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#27080 = ORIENTED_EDGE ( 'NONE', *, *, #9150, .F. ) ; +#27081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27082 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.737967874686777500, -28.38801640354855500 ) ) ; +#27083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27084 = FACE_OUTER_BOUND ( 'NONE', #79022, .T. ) ; +#27085 = CIRCLE ( 'NONE', #18823, 10.00000000000009600 ) ; +#27086 = AXIS2_PLACEMENT_3D ( 'NONE', #39141, #70430, #51640 ) ; +#27087 = EDGE_LOOP ( 'NONE', ( #37935, #24955, #6776, #46925 ) ) ; +#27088 = VERTEX_POINT ( 'NONE', #49945 ) ; +#27089 = ORIENTED_EDGE ( 'NONE', *, *, #75422, .T. ) ; +#27090 = ORIENTED_EDGE ( 'NONE', *, *, #32963, .T. ) ; +#27091 = ORIENTED_EDGE ( 'NONE', *, *, #34882, .T. ) ; +#27092 = ORIENTED_EDGE ( 'NONE', *, *, #9598, .T. ) ; +#27093 = ADVANCED_FACE ( 'NONE', ( #43476 ), #39587, .T. ) ; +#27094 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, -0.1666666666666588000, 3.794441961969996900 ) ) ; +#27095 = AXIS2_PLACEMENT_3D ( 'NONE', #78446, #41159, #3887 ) ; +#27096 = VERTEX_POINT ( 'NONE', #62501 ) ; +#27097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27098 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7271, #50782, #1297, #44776 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.522213672366955700E-017, 0.001246264537621159600 ), + .UNSPECIFIED. ) ; +#27099 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192690600, 56.80000000000002600, -28.70555803803030800 ) ) ; +#27100 = ADVANCED_FACE ( 'NONE', ( #58087 ), #6504, .F. ) ; +#27101 = EDGE_CURVE ( 'NONE', #80233, #23819, #23067, .T. ) ; +#27102 = ORIENTED_EDGE ( 'NONE', *, *, #51249, .T. ) ; +#27103 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27104 = CIRCLE ( 'NONE', #66800, 10.50000000000009800 ) ; +#27105 = AXIS2_PLACEMENT_3D ( 'NONE', #15542, #46490, #77811 ) ; +#27106 = ORIENTED_EDGE ( 'NONE', *, *, #55590, .T. ) ; +#27107 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.47246552159109000, -28.38801640354855500 ) ) ; +#27108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27109 = EDGE_LOOP ( 'NONE', ( #13929, #74230, #48249, #36524 ) ) ; +#27110 = CONICAL_SURFACE ( 'NONE', #57346, 10.50000000000009600, 0.7853981633974482800 ) ; +#27111 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#27113 = ORIENTED_EDGE ( 'NONE', *, *, #60754, .F. ) ; +#27112 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#27114 = ADVANCED_FACE ( 'NONE', ( #25012 ), #37615, .F. ) ; +#27115 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16221, #22474, #41225, #3957, #47442, #10230 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002025992967437168000, 0.004051985934874336100 ), + .UNSPECIFIED. ) ; +#27116 = CARTESIAN_POINT ( 'NONE', ( 2.182090313453928300E-013, 68.39962244433155500, -28.53664883431610000 ) ) ; +#27117 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27118 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963100, 64.37738371066720300, -28.70555803803047500 ) ) ; +#27119 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 43.33333333333333600, -10.73183747965883100 ) ) ; +#27120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27122 = EDGE_CURVE ( 'NONE', #50924, #21936, #54182, .T. ) ; +#27123 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#27124 = CIRCLE ( 'NONE', #34345, 10.50000000000009600 ) ; +#27125 = ORIENTED_EDGE ( 'NONE', *, *, #18420, .F. ) ; +#27126 = EDGE_CURVE ( 'NONE', #34889, #19608, #42926, .T. ) ; +#27127 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714215400, 87.92318720225456700, -28.70555803803030800 ) ) ; +#27128 = EDGE_LOOP ( 'NONE', ( #49047, #15515, #46537, #4682 ) ) ; +#27129 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 20.25489551879203600, -28.37193179497694500 ) ) ; +#27130 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957512600, 21.59027028261001400, -28.70555803802993800 ) ) ; +#27131 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#27132 = EDGE_CURVE ( 'NONE', #505, #66775, #8433, .T. ) ; +#27133 = CARTESIAN_POINT ( 'NONE', ( 10.65597861061099900, 8.107395204316965500, -28.54957942741934200 ) ) ; +#27134 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#27135 = EDGE_CURVE ( 'NONE', #51254, #16205, #56128, .T. ) ; +#27136 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841333000, 70.16349705304836000, -28.30782889147497600 ) ) ; +#27137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27138 = CONICAL_SURFACE ( 'NONE', #41088, 10.00000000000009200, 0.7853981633974447300 ) ; +#27139 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 5.666666666666681200, 2.794441961969992100 ) ) ; +#27140 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#27141 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543762200, 71.52472935029879900, -28.39317435246134400 ) ) ; +#27142 = CONICAL_SURFACE ( 'NONE', #14541, 10.00000000000009200, 0.7853981633974447300 ) ; +#27143 = VERTEX_POINT ( 'NONE', #37995 ) ; +#27144 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5976, #11973, #30737, #49451 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207968512900E-007, 0.0008724366121409675600 ), + .UNSPECIFIED. ) ; +#27145 = ORIENTED_EDGE ( 'NONE', *, *, #3023, .F. ) ; +#27146 = CARTESIAN_POINT ( 'NONE', ( -16.44673298322516400, 60.11613117245443000, -28.57420149390117100 ) ) ; +#27147 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 73.65857157145693200, -28.20555803802997700 ) ) ; +#27148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27149 = AXIS2_PLACEMENT_3D ( 'NONE', #42564, #5330, #48809 ) ; +#27150 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27151 = EDGE_CURVE ( 'NONE', #71029, #63152, #28531, .T. ) ; +#27152 = EDGE_CURVE ( 'NONE', #30323, #47225, #70730, .T. ) ; +#27153 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671737400, 71.93585231025954800, -28.38420446581291400 ) ) ; +#27154 = EDGE_CURVE ( 'NONE', #63100, #39151, #14024, .T. ) ; +#27155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27156 = CIRCLE ( 'NONE', #26443, 10.00000000000009400 ) ; +#27157 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#27158 = ORIENTED_EDGE ( 'NONE', *, *, #71569, .F. ) ; +#27159 = FACE_OUTER_BOUND ( 'NONE', #64984, .T. ) ; +#27160 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27161 = ORIENTED_EDGE ( 'NONE', *, *, #54873, .F. ) ; +#27162 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026330000, 24.55000000000000100, -28.70555803802994200 ) ) ; +#27163 = EDGE_LOOP ( 'NONE', ( #14811, #71047, #58046, #72978 ) ) ; +#27164 = AXIS2_PLACEMENT_3D ( 'NONE', #43631, #18908, #62445 ) ; +#27165 = ORIENTED_EDGE ( 'NONE', *, *, #37475, .T. ) ; +#27166 = CIRCLE ( 'NONE', #28871, 10.00000000000009600 ) ; +#27167 = ORIENTED_EDGE ( 'NONE', *, *, #37974, .F. ) ; +#27168 = ORIENTED_EDGE ( 'NONE', *, *, #10072, .T. ) ; +#27169 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 80.34267608797554800, -28.20555803803047800 ) ) ; +#27170 = VERTEX_POINT ( 'NONE', #38504 ) ; +#27171 = ORIENTED_EDGE ( 'NONE', *, *, #29300, .F. ) ; +#27172 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#27173 = VERTEX_POINT ( 'NONE', #20071 ) ; +#27174 = ORIENTED_EDGE ( 'NONE', *, *, #36764, .F. ) ; +#27175 = EDGE_CURVE ( 'NONE', #881, #73072, #80337, .T. ) ; +#27176 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27177 = AXIS2_PLACEMENT_3D ( 'NONE', #46436, #9190, #52709 ) ; +#27178 = AXIS2_PLACEMENT_3D ( 'NONE', #29648, #79142, #73158 ) ; +#27179 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#27180 = ORIENTED_EDGE ( 'NONE', *, *, #46754, .T. ) ; +#27181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27183 = ADVANCED_FACE ( 'NONE', ( #72707 ), #19140, .T. ) ; +#27184 = FACE_OUTER_BOUND ( 'NONE', #12104, .T. ) ; +#27186 = ORIENTED_EDGE ( 'NONE', *, *, #22024, .T. ) ; +#27185 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#27187 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576700, 20.67701665379184900, -28.20555803802994200 ) ) ; +#27188 = EDGE_LOOP ( 'NONE', ( #15049, #24054, #17108, #9973, #2445, #44987 ) ) ; +#27189 = EDGE_LOOP ( 'NONE', ( #24215, #2275, #63068, #49815 ) ) ; +#27190 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27191 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#27192 = FACE_OUTER_BOUND ( 'NONE', #46012, .T. ) ; +#27193 = ADVANCED_FACE ( 'NONE', ( #4554 ), #66850, .T. ) ; +#27194 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 49.33333333333335700, -3.705558038030004400 ) ) ; +#27195 = AXIS2_PLACEMENT_3D ( 'NONE', #7028, #44249, #75309 ) ; +#27196 = ORIENTED_EDGE ( 'NONE', *, *, #62291, .F. ) ; +#27197 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.68929190448938000, -28.20555803802997700 ) ) ; +#27198 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.68929190448941200, -28.20555803802995200 ) ) ; +#27199 = EDGE_LOOP ( 'NONE', ( #62581, #75238, #4713 ) ) ; +#27200 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57080, #13576, #69567, #32327 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927619800 ), + .UNSPECIFIED. ) ; +#27201 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614819300, 31.10677350908856900, -28.30799595738881900 ) ) ; +#27202 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 14.33333333333333900, -5.205558038030008400 ) ) ; +#27203 = AXIS2_PLACEMENT_3D ( 'NONE', #60987, #17458, #29730 ) ; +#27204 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362735200, 84.03471854269724900, -28.66119098264625000 ) ) ; +#27205 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027405300, 52.22511094383836600, -28.55192314908415700 ) ) ; +#27206 = FACE_OUTER_BOUND ( 'NONE', #63309, .T. ) ; +#27207 = ORIENTED_EDGE ( 'NONE', *, *, #9229, .F. ) ; +#27208 = ADVANCED_FACE ( 'NONE', ( #3597 ), #33750, .F. ) ; +#27209 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 51.66666666666667100, 8.320721403598824400 ) ) ; +#27210 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#27211 = ORIENTED_EDGE ( 'NONE', *, *, #71788, .T. ) ; +#27212 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#27213 = CARTESIAN_POINT ( 'NONE', ( 16.93414660040040300, 47.95713945855106900, -28.51850601323091500 ) ) ; +#27214 = EDGE_LOOP ( 'NONE', ( #736, #63384, #72428 ) ) ; +#27215 = AXIS2_PLACEMENT_3D ( 'NONE', #60841, #23556, #67076 ) ; +#27216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27217 = CARTESIAN_POINT ( 'NONE', ( 4.502075021551499700, 90.99854748491397100, -28.70555803803030800 ) ) ; +#27218 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#27219 = ADVANCED_FACE ( 'NONE', ( #68792 ), #1794, .T. ) ; +#27220 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27221 = CARTESIAN_POINT ( 'NONE', ( -17.24297557446558200, 70.16517473503391500, -28.29551658696701800 ) ) ; +#27222 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27223 = AXIS2_PLACEMENT_3D ( 'NONE', #72202, #34937, #78453 ) ; +#27224 = CONICAL_SURFACE ( 'NONE', #37359, 10.00000000000009200, 0.7853981633974447300 ) ; +#27225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27226 = CIRCLE ( 'NONE', #79127, 9.500000000000099500 ) ; +#27227 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 41.67701665379185300, -28.20555803802996700 ) ) ; +#27228 = EDGE_LOOP ( 'NONE', ( #15387, #36710, #16698, #25247, #12248, #41725, #50751, #73351 ) ) ; +#27229 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 20.24660241562181900, -28.20555803802994200 ) ) ; +#27230 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 71.65075715145280800, -28.20555803802997700 ) ) ; +#27231 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019287000, 54.79999999999947100, -28.70555803803047500 ) ) ; +#27232 = CARTESIAN_POINT ( 'NONE', ( 15.16937532304025100, 15.40149171177390400, -28.70555803803001600 ) ) ; +#27233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27234 = CARTESIAN_POINT ( 'NONE', ( -2.438174915909124600, 20.48385710212511800, -28.57719681746175800 ) ) ; +#27235 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 77.94142842854297700, -28.20555803802997700 ) ) ; +#27236 = EDGE_LOOP ( 'NONE', ( #73740, #20928, #23675 ) ) ; +#27237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27238 = CIRCLE ( 'NONE', #39374, 10.00000000000009200 ) ; +#27239 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124976200, 85.13282980700505200, -28.53914313452753100 ) ) ; +#27240 = EDGE_LOOP ( 'NONE', ( #36397, #12381, #56021, #27654 ) ) ; +#27241 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#27242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27243 = FACE_OUTER_BOUND ( 'NONE', #25310, .T. ) ; +#27244 = ORIENTED_EDGE ( 'NONE', *, *, #36387, .T. ) ; +#27245 = EDGE_CURVE ( 'NONE', #42888, #12313, #35701, .T. ) ; +#27246 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 55.16666666666665700, -9.205558038030003900 ) ) ; +#27247 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571388500, 63.67681279774495100, -28.70555803803047500 ) ) ; +#27248 = FACE_OUTER_BOUND ( 'NONE', #47910, .T. ) ; +#27249 = EDGE_CURVE ( 'NONE', #2750, #15406, #65898, .T. ) ; +#27250 = ORIENTED_EDGE ( 'NONE', *, *, #16074, .T. ) ; +#27251 = ORIENTED_EDGE ( 'NONE', *, *, #44918, .F. ) ; +#27253 = ORIENTED_EDGE ( 'NONE', *, *, #2802, .T. ) ; +#27252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40990, #59498, #65756, #3700 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.117499858742978200E-017, 0.001246264537621167600 ), + .UNSPECIFIED. ) ; +#27255 = ORIENTED_EDGE ( 'NONE', *, *, #30494, .F. ) ; +#27256 = ORIENTED_EDGE ( 'NONE', *, *, #78003, .T. ) ; +#27257 = ORIENTED_EDGE ( 'NONE', *, *, #40835, .F. ) ; +#27258 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215507400, 56.13383585008131900, -28.37247596307100000 ) ) ; +#27259 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27261 = ORIENTED_EDGE ( 'NONE', *, *, #80296, .F. ) ; +#27260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#27263 = EDGE_CURVE ( 'NONE', #2651, #34228, #50255, .T. ) ; +#27264 = CARTESIAN_POINT ( 'NONE', ( 4.002024496668816800, 18.28907889423205200, -28.25433304472402400 ) ) ; +#27265 = EDGE_CURVE ( 'NONE', #56812, #7698, #52200, .T. ) ; +#27266 = VERTEX_POINT ( 'NONE', #45560 ) ; +#27267 = FACE_OUTER_BOUND ( 'NONE', #58150, .T. ) ; +#27268 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286464100, 62.66699492863850200, -28.67024809316607300 ) ) ; +#27269 = ORIENTED_EDGE ( 'NONE', *, *, #11533, .F. ) ; +#27270 = EDGE_CURVE ( 'NONE', #52005, #301, #51354, .T. ) ; +#27271 = VERTEX_POINT ( 'NONE', #45837 ) ; +#27272 = ORIENTED_EDGE ( 'NONE', *, *, #76852, .F. ) ; +#27273 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 72.18315603019281900, -28.70555803802999500 ) ) ; +#27274 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#27275 = CONICAL_SURFACE ( 'NONE', #75429, 10.00000000000009400, 0.7853981633974447300 ) ; +#27276 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 20.33333333333334300, 5.722645192245503900 ) ) ; +#27277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27278 = AXIS2_PLACEMENT_3D ( 'NONE', #60315, #23037, #66544 ) ; +#27279 = ORIENTED_EDGE ( 'NONE', *, *, #49614, .F. ) ; +#27280 = EDGE_CURVE ( 'NONE', #45253, #67441, #36937, .T. ) ; +#27281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27282 = EDGE_CURVE ( 'NONE', #40983, #49759, #22506, .T. ) ; +#27283 = EDGE_CURVE ( 'NONE', #4625, #66852, #8009, .T. ) ; +#27284 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#27285 = ORIENTED_EDGE ( 'NONE', *, *, #47636, .T. ) ; +#27286 = ADVANCED_FACE ( 'NONE', ( #21121 ), #64944, .T. ) ; +#27287 = AXIS2_PLACEMENT_3D ( 'NONE', #1004, #44485, #7252 ) ; +#27288 = FACE_OUTER_BOUND ( 'NONE', #80509, .T. ) ; +#27290 = ORIENTED_EDGE ( 'NONE', *, *, #45694, .F. ) ; +#27289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27291 = ORIENTED_EDGE ( 'NONE', *, *, #6590, .F. ) ; +#27292 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27293 = ADVANCED_FACE ( 'NONE', ( #2574 ), #79494, .F. ) ; +#27294 = AXIS2_PLACEMENT_3D ( 'NONE', #23259, #54244, #79288 ) ; +#27295 = AXIS2_PLACEMENT_3D ( 'NONE', #37755, #501, #43993 ) ; +#27296 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 40.25227248018354900, -28.70555803802998400 ) ) ; +#27297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62739, #12973, #39043, #1785 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635226805700E-007, 0.0008082706238601635500 ), + .UNSPECIFIED. ) ; +#27298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27299 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 63.83333333333333600, -3.349151577478984600 ) ) ; +#27300 = FACE_OUTER_BOUND ( 'NONE', #47527, .T. ) ; +#27301 = ADVANCED_FACE ( 'NONE', ( #628 ), #46338, .F. ) ; +#27302 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72826, #10539, #41785, #4541 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760851279900, 0.0007596411030276309400 ), + .UNSPECIFIED. ) ; +#27303 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#27304 = VERTEX_POINT ( 'NONE', #21679 ) ; +#27305 = VERTEX_POINT ( 'NONE', #65217 ) ; +#27306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27307 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807163900, 84.79999999999998300, -28.70555803802997700 ) ) ; +#27308 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536600, 81.82440674572818300, -28.45987523529581900 ) ) ; +#27309 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543200, 80.27440177985819500, -28.29986836858018200 ) ) ; +#27310 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68610, #31357, #6579, #50054 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925612080300E-007, 0.0004431156063177127800 ), + .UNSPECIFIED. ) ; +#27311 = CARTESIAN_POINT ( 'NONE', ( 10.42497552823717800, 92.18241614681682000, -28.70555803803002000 ) ) ; +#27312 = AXIS2_PLACEMENT_3D ( 'NONE', #49092, #11889, #55369 ) ; +#27313 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#27314 = ADVANCED_FACE ( 'NONE', ( #31809 ), #13318, .T. ) ; +#27315 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32852, #39089, #57877, #20634 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159894700E-007, 0.0008724363063898948800 ), + .UNSPECIFIED. ) ; +#27316 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#27317 = CONICAL_SURFACE ( 'NONE', #37230, 10.00000000000009600, 0.7853981633974482800 ) ; +#27318 = VERTEX_POINT ( 'NONE', #40416 ) ; +#27319 = CARTESIAN_POINT ( 'NONE', ( -18.49243782672170500, 3.015124346556697300, -25.88815306470280200 ) ) ; +#27320 = ORIENTED_EDGE ( 'NONE', *, *, #6975, .F. ) ; +#27321 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 26.16666666666666800, -2.545304000185620600 ) ) ; +#27322 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#27323 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 18.07141756547860100, -28.70555803803025800 ) ) ; +#27325 = EDGE_CURVE ( 'NONE', #8206, #66062, #74366, .T. ) ; +#27324 = ORIENTED_EDGE ( 'NONE', *, *, #35369, .F. ) ; +#27326 = CONICAL_SURFACE ( 'NONE', #42247, 10.50000000000009200, 0.7853981633974482800 ) ; +#27327 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 51.43650294695080300, -28.30782889147504400 ) ) ; +#27328 = EDGE_LOOP ( 'NONE', ( #48608, #45209, #42433 ) ) ; +#27329 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#27330 = AXIS2_PLACEMENT_3D ( 'NONE', #34674, #40914, #28449 ) ; +#27331 = ORIENTED_EDGE ( 'NONE', *, *, #29911, .T. ) ; +#27332 = ORIENTED_EDGE ( 'NONE', *, *, #37591, .F. ) ; +#27333 = ORIENTED_EDGE ( 'NONE', *, *, #56678, .T. ) ; +#27334 = ORIENTED_EDGE ( 'NONE', *, *, #178, .T. ) ; +#27335 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195930400, 43.65857157145701700, -28.37229765499282100 ) ) ; +#27336 = ADVANCED_FACE ( 'NONE', ( #17207 ), #61002, .T. ) ; +#27337 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27338 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533299200, 31.29130857014966700, -28.37223374938522000 ) ) ; +#27339 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040000, 71.43250300240211500, -28.20555803803014400 ) ) ; +#27340 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725579300, 14.36787096422356000, -28.37244029424756800 ) ) ; +#27341 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187877300, 10.10186521182831100, -28.24089224568487600 ) ) ; +#27342 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312769300, 20.49769010897089000, -28.61774594593775900 ) ) ; +#27343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27344 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27345 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27346 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252817900, 49.63131911501876200, -28.51286550264511300 ) ) ; +#27347 = CIRCLE ( 'NONE', #55701, 10.00000000000009600 ) ; +#27348 = AXIS2_PLACEMENT_3D ( 'NONE', #42106, #54358, #4862 ) ; +#27349 = ORIENTED_EDGE ( 'NONE', *, *, #56258, .F. ) ; +#27350 = CARTESIAN_POINT ( 'NONE', ( 10.07349692871609500, 61.37839075872564400, -28.29547734244358600 ) ) ; +#27351 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187000, 69.60439022488336000, -28.70555803802997700 ) ) ; +#27352 = VERTEX_POINT ( 'NONE', #34454 ) ; +#27353 = ORIENTED_EDGE ( 'NONE', *, *, #10468, .F. ) ; +#27354 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27355 = ORIENTED_EDGE ( 'NONE', *, *, #68580, .F. ) ; +#27356 = EDGE_LOOP ( 'NONE', ( #16556, #74511, #45776, #79535 ) ) ; +#27357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27358 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079862400, 80.16616330387837800, -28.27375072930982800 ) ) ; +#27359 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252837800, 9.968680884981202100, -28.51286550264501000 ) ) ; +#27360 = CIRCLE ( 'NONE', #66043, 12.50000000000000000 ) ; +#27361 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#27362 = CARTESIAN_POINT ( 'NONE', ( 3.295822856858335600, 9.519451428761126300, -28.52576311647843000 ) ) ; +#27363 = ORIENTED_EDGE ( 'NONE', *, *, #63741, .T. ) ; +#27364 = AXIS2_PLACEMENT_3D ( 'NONE', #79297, #4750, #48243 ) ; +#27365 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#27366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3692, #53487, #41232, #3966 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569587707300E-007, 0.0007596410370203617400 ), + .UNSPECIFIED. ) ; +#27367 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#27368 = ORIENTED_EDGE ( 'NONE', *, *, #53646, .F. ) ; +#27369 = EDGE_CURVE ( 'NONE', #77167, #36098, #29892, .T. ) ; +#27370 = FACE_OUTER_BOUND ( 'NONE', #1993, .T. ) ; +#27371 = ORIENTED_EDGE ( 'NONE', *, *, #25608, .T. ) ; +#27372 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 69.83333333333328600, -9.205558038030003900 ) ) ; +#27373 = CARTESIAN_POINT ( 'NONE', ( 3.064555739225102400, 51.50962196508486800, -28.29483400905898400 ) ) ; +#27374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27375 = EDGE_CURVE ( 'NONE', #65731, #28190, #48311, .T. ) ; +#27376 = EDGE_CURVE ( 'NONE', #31531, #3390, #59905, .T. ) ; +#27377 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#27378 = VERTEX_POINT ( 'NONE', #22202 ) ; +#27379 = ORIENTED_EDGE ( 'NONE', *, *, #50060, .F. ) ; +#27380 = ORIENTED_EDGE ( 'NONE', *, *, #20146, .T. ) ; +#27381 = ADVANCED_FACE ( 'NONE', ( #15254 ), #34721, .T. ) ; +#27382 = AXIS2_PLACEMENT_3D ( 'NONE', #51544, #14324, #57839 ) ; +#27383 = EDGE_CURVE ( 'NONE', #22658, #76162, #45376, .T. ) ; +#27384 = EDGE_CURVE ( 'NONE', #16633, #16848, #44375, .T. ) ; +#27385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27386 = EDGE_CURVE ( 'NONE', #21792, #72055, #30979, .T. ) ; +#27387 = CARTESIAN_POINT ( 'NONE', ( 17.37150777124371000, 81.43250300240198700, -28.25053031809502000 ) ) ; +#27388 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#27389 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 26.44142842854307300, -28.20555803802994200 ) ) ; +#27390 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#27391 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 41.16666666666667100, 9.794441961969994300 ) ) ; +#27392 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995705000, 44.61903418172678200, -28.69431509262337700 ) ) ; +#27393 = CIRCLE ( 'NONE', #62773, 10.00000000000009200 ) ; +#27394 = ORIENTED_EDGE ( 'NONE', *, *, #48916, .F. ) ; +#27395 = ORIENTED_EDGE ( 'NONE', *, *, #25698, .F. ) ; +#27396 = AXIS2_PLACEMENT_3D ( 'NONE', #44328, #7107, #50599 ) ; +#27397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27399 = ADVANCED_FACE ( 'NONE', ( #77531 ), #29042, .T. ) ; +#27400 = CONICAL_SURFACE ( 'NONE', #13592, 10.50000000000009600, 0.7853981633974500600 ) ; +#27401 = VERTEX_POINT ( 'NONE', #4225 ) ; +#27402 = ORIENTED_EDGE ( 'NONE', *, *, #24474, .T. ) ; +#27403 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27404 = CARTESIAN_POINT ( 'NONE', ( 12.10011726479555000, 14.04999999999927200, -28.53808257741980400 ) ) ; +#27405 = VERTEX_POINT ( 'NONE', #47441 ) ; +#27406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27407 = CARTESIAN_POINT ( 'NONE', ( 16.93414660040043200, 26.95713945855107600, -28.51850601323090500 ) ) ; +#27408 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 41.52858243452104900, -28.70555803802997700 ) ) ; +#27409 = ADVANCED_FACE ( 'NONE', ( #62952 ), #25960, .F. ) ; +#27410 = ORIENTED_EDGE ( 'NONE', *, *, #33347, .T. ) ; +#27411 = AXIS2_PLACEMENT_3D ( 'NONE', #20136, #63664, #26413 ) ; +#27412 = AXIS2_PLACEMENT_3D ( 'NONE', #68440, #43396, #62190 ) ; +#27413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27414 = AXIS2_PLACEMENT_3D ( 'NONE', #18475, #49443, #55716 ) ; +#27415 = CONICAL_SURFACE ( 'NONE', #56214, 10.50000000000009200, 0.7853981633974482800 ) ; +#27416 = ADVANCED_FACE ( 'NONE', ( #64917 ), #73639, .F. ) ; +#27417 = CARTESIAN_POINT ( 'NONE', ( 16.24682844054300900, 94.09365688108601900, -28.38965197393400100 ) ) ; +#27418 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#27419 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57941, #2158, #20968, #64502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001043664170964651000 ), + .UNSPECIFIED. ) ; +#27420 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#27421 = VERTEX_POINT ( 'NONE', #72786 ) ; +#27422 = PLANE ( 'NONE', #49274 ) ; +#27423 = LINE ( 'NONE', #75382, #64422 ) ; +#27424 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265431400, 80.27440177985785400, -28.29986836858059700 ) ) ; +#27425 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 3.500000000000008900, -7.061964498581016200 ) ) ; +#27426 = EDGE_LOOP ( 'NONE', ( #40858, #22309, #59463, #4642 ) ) ; +#27427 = CARTESIAN_POINT ( 'NONE', ( 17.22125914545566200, 28.66476764525110700, -28.30311733712046200 ) ) ; +#27428 = EDGE_LOOP ( 'NONE', ( #15511, #52208, #47160, #18890 ) ) ; +#27429 = ORIENTED_EDGE ( 'NONE', *, *, #79202, .T. ) ; +#27430 = EDGE_LOOP ( 'NONE', ( #77094, #4860, #72664 ) ) ; +#27431 = CIRCLE ( 'NONE', #33140, 10.50000000000009200 ) ; +#27432 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.43250300240230600, -28.20555803802997700 ) ) ; +#27433 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.16749699759768800, -28.20555803802992800 ) ) ; +#27434 = AXIS2_PLACEMENT_3D ( 'NONE', #78452, #34936, #22680 ) ; +#27435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27436 = EDGE_CURVE ( 'NONE', #36928, #35058, #16516, .T. ) ; +#27437 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33085, #1786, #58107, #20858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283330663600, 0.0007287255810272408100 ), + .UNSPECIFIED. ) ; +#27438 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27439 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 71.43250300240197200, -28.20555803803047800 ) ) ; +#27440 = VERTEX_POINT ( 'NONE', #16740 ) ; +#27441 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007437300, 31.78032162676581900, -28.55467576046956800 ) ) ; +#27442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27443 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 20.44069092601378700, -28.35186440610856500 ) ) ; +#27444 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#27445 = FACE_OUTER_BOUND ( 'NONE', #34825, .T. ) ; +#27446 = ORIENTED_EDGE ( 'NONE', *, *, #55260, .T. ) ; +#27447 = EDGE_CURVE ( 'NONE', #61231, #8074, #9376, .T. ) ; +#27448 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 18.07141756547892100, -28.70555803802992800 ) ) ; +#27449 = AXIS2_PLACEMENT_3D ( 'NONE', #72403, #59885, #35142 ) ; +#27450 = ORIENTED_EDGE ( 'NONE', *, *, #71976, .T. ) ; +#27451 = CARTESIAN_POINT ( 'NONE', ( -17.14651939117049700, 72.51488052429279200, -28.47263588290807600 ) ) ; +#27452 = CARTESIAN_POINT ( 'NONE', ( -9.438174915909122800, 20.48385710212511800, -28.57719681746175800 ) ) ; +#27453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27454 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830878500, 61.64954451135936600, -28.33400579219035700 ) ) ; +#27455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27456 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 32.47376207875059600, -28.70555803802996700 ) ) ; +#27457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56770, #13281, #50478, #19529, #63050, #25797, #69280, #32034, #75533, #38244, #1003, #44484, #7251, #50755, #13552, #57053, #19791, #63330, #26059, #69548, #32297, #75799, #38501, #1265, #44751, #7516, #51014, #13815, #57313, #20068, #63589, #26343, #69815, #32558, #76066, #38780, #1542, #45017, #7784, #51273, #14077 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1249999999999814900, 0.1874999999999725800, 0.2187499999999685000, 0.2343749999999667800, 0.2499999999999650800, 0.3749999999999522600, 0.4374999999999458800, 0.4687499999999426000, 0.4843749999999408800, 0.4921874999999400500, 0.4960937499999397700, 0.4980468749999394400, 0.4999999999999391600, 0.6249999999999247300, 0.6874999999999176200, 0.7187499999999141800, 0.7343749999999125100, 0.7421874999999118500, 0.7460937499999115200, 0.7480468749999114000, 0.7490234374999115200, 0.7499999999999115200, 0.8749999999999558100, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#27458 = AXIS2_PLACEMENT_3D ( 'NONE', #6822, #44303, #7069 ) ; +#27459 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819190700, 51.65075715145310700, -28.20555803802997700 ) ) ; +#27460 = VERTEX_POINT ( 'NONE', #54258 ) ; +#27461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27462 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 89.98922577050342400, -28.37255355648634500 ) ) ; +#27463 = VERTEX_POINT ( 'NONE', #79306 ) ; +#27464 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 47.16666666666667900, 0.1341879241256129200 ) ) ; +#27465 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894000, 70.46231468379673400, -28.37082013777818900 ) ) ; +#27466 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825243000, 90.16054007504463600, -28.34042301926880800 ) ) ; +#27467 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 12.16666666666666400, 0.9380355014189834000 ) ) ; +#27468 = CONICAL_SURFACE ( 'NONE', #21553, 10.00000000000009200, 0.7853981633974447300 ) ; +#27469 = ORIENTED_EDGE ( 'NONE', *, *, #3708, .F. ) ; +#27470 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.23796787468685900, -28.38801640354854800 ) ) ; +#27471 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27473 = EDGE_CURVE ( 'NONE', #73075, #53190, #59030, .T. ) ; +#27472 = EDGE_LOOP ( 'NONE', ( #34991, #52863, #49356, #77174, #27567, #37795 ) ) ; +#27474 = ORIENTED_EDGE ( 'NONE', *, *, #74085, .F. ) ; +#27475 = CONICAL_SURFACE ( 'NONE', #9871, 10.50000000000009600, 0.7853981633974500600 ) ; +#27476 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 49.50000000000000700, -9.258116921287651700 ) ) ; +#27477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27478 = ORIENTED_EDGE ( 'NONE', *, *, #53220, .T. ) ; +#27479 = ORIENTED_EDGE ( 'NONE', *, *, #79975, .T. ) ; +#27480 = ORIENTED_EDGE ( 'NONE', *, *, #31327, .T. ) ; +#27481 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#27482 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#27483 = CIRCLE ( 'NONE', #69218, 10.00000000000009200 ) ; +#27484 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#27485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59650, #16114, #72170, #34893 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854477200, 0.0007596411030283562700 ), + .UNSPECIFIED. ) ; +#27486 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27487 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305486600, 89.70395328581636800, -28.70555803803002000 ) ) ; +#27488 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280165000, 60.90033558196072500, -28.70555803803030800 ) ) ; +#27489 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120801400, 90.38098890548042200, -28.33427604305569100 ) ) ; +#27490 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#27491 = ORIENTED_EDGE ( 'NONE', *, *, #59409, .T. ) ; +#27492 = ORIENTED_EDGE ( 'NONE', *, *, #44445, .T. ) ; +#27493 = EDGE_CURVE ( 'NONE', #73641, #31243, #2027, .T. ) ; +#27494 = CYLINDRICAL_SURFACE ( 'NONE', #30149, 10.00000000000000200 ) ; +#27495 = ORIENTED_EDGE ( 'NONE', *, *, #32277, .T. ) ; +#27496 = PLANE ( 'NONE', #51457 ) ; +#27497 = ORIENTED_EDGE ( 'NONE', *, *, #53221, .F. ) ; +#27498 = CARTESIAN_POINT ( 'NONE', ( -16.73584074219410700, 19.92563948201435800, -28.45080305020446300 ) ) ; +#27499 = ORIENTED_EDGE ( 'NONE', *, *, #72638, .T. ) ; +#27500 = ORIENTED_EDGE ( 'NONE', *, *, #62741, .F. ) ; +#27501 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#27502 = CONICAL_SURFACE ( 'NONE', #61179, 10.00000000000009600, 0.7853981633974447300 ) ; +#27503 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 71.82440674572814000, -28.45987523529581900 ) ) ; +#27504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27505 = ORIENTED_EDGE ( 'NONE', *, *, #41403, .F. ) ; +#27506 = CARTESIAN_POINT ( 'NONE', ( 9.277608394787083800, 50.54999999999995500, -28.70555803803009800 ) ) ; +#27507 = ADVANCED_FACE ( 'NONE', ( #57091 ), #71688, .T. ) ; +#27508 = CIRCLE ( 'NONE', #50260, 10.00000000000009200 ) ; +#27509 = AXIS2_PLACEMENT_3D ( 'NONE', #64280, #27001, #70484 ) ; +#27510 = EDGE_CURVE ( 'NONE', #26866, #11374, #68358, .T. ) ; +#27511 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655678500, 28.42298334620757000, -28.20555803802994500 ) ) ; +#27512 = ADVANCED_FACE ( 'NONE', ( #75565 ), #38542, .F. ) ; +#27513 = ORIENTED_EDGE ( 'NONE', *, *, #64190, .F. ) ; +#27514 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498191000, 20.60172914845359700, -28.24094723680242700 ) ) ; +#27515 = EDGE_CURVE ( 'NONE', #69283, #61281, #55117, .T. ) ; +#27516 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#27517 = AXIS2_PLACEMENT_3D ( 'NONE', #22498, #66294, #53757 ) ; +#27518 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 53.00000000000000700, 6.794441961969995200 ) ) ; +#27519 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#27520 = CIRCLE ( 'NONE', #36717, 10.00000000000009200 ) ; +#27521 = ORIENTED_EDGE ( 'NONE', *, *, #69522, .F. ) ; +#27522 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27523 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086482900, 49.97187418724322300, -28.37194250757538000 ) ) ; +#27524 = CARTESIAN_POINT ( 'NONE', ( 7.838235906100254400, 8.864092883706259600, -28.64083434776820900 ) ) ; +#27525 = AXIS2_PLACEMENT_3D ( 'NONE', #57568, #20315, #63848 ) ; +#27526 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614679800, 17.99322649091134000, -28.30799595738867300 ) ) ; +#27527 = CARTESIAN_POINT ( 'NONE', ( -1.266348137463069200E-013, 83.65857157145696000, -28.20555803803014400 ) ) ; +#27528 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534610700, 50.49920551340398600, -28.70555803802996700 ) ) ; +#27529 = AXIS2_PLACEMENT_3D ( 'NONE', #29426, #72907, #35645 ) ; +#27530 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462826700, 80.34267608797601700, -28.20555803803030800 ) ) ; +#27531 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2102, #39358, #8341, #51849 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192576721700 ), + .UNSPECIFIED. ) ; +#27532 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27533 = EDGE_CURVE ( 'NONE', #46914, #60591, #27930, .T. ) ; +#27534 = ADVANCED_FACE ( 'NONE', ( #40526 ), #53163, .F. ) ; +#27535 = EDGE_CURVE ( 'NONE', #72470, #50903, #69714, .T. ) ; +#27536 = AXIS2_PLACEMENT_3D ( 'NONE', #19776, #63306, #26042 ) ; +#27537 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.00000000000001400, -1.205558038030005300 ) ) ; +#27538 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35124, #10345, #29161, #72640 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061278700E-007, 0.001119323292485692100 ), + .UNSPECIFIED. ) ; +#27539 = VERTEX_POINT ( 'NONE', #73861 ) ; +#27540 = ORIENTED_EDGE ( 'NONE', *, *, #80362, .T. ) ; +#27541 = EDGE_CURVE ( 'NONE', #57479, #19571, #53888, .T. ) ; +#27542 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 18.16666666666668900, -9.205558038030003900 ) ) ; +#27543 = AXIS2_PLACEMENT_3D ( 'NONE', #40082, #2810, #46304 ) ; +#27544 = AXIS2_PLACEMENT_3D ( 'NONE', #35845, #42076, #60614 ) ; +#27545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27546 = ORIENTED_EDGE ( 'NONE', *, *, #51192, .F. ) ; +#27547 = CONICAL_SURFACE ( 'NONE', #69414, 10.00000000000009400, 0.7853981633974447300 ) ; +#27548 = VERTEX_POINT ( 'NONE', #61629 ) ; +#27549 = FACE_OUTER_BOUND ( 'NONE', #23865, .T. ) ; +#27550 = VERTEX_POINT ( 'NONE', #24347 ) ; +#27551 = CARTESIAN_POINT ( 'NONE', ( 1.116254736416757400, 14.04999999999998100, -28.53994725305374300 ) ) ; +#27552 = CONICAL_SURFACE ( 'NONE', #30899, 10.50000000000009600, 0.7853981633974500600 ) ; +#27553 = ORIENTED_EDGE ( 'NONE', *, *, #49475, .T. ) ; +#27554 = ORIENTED_EDGE ( 'NONE', *, *, #47903, .F. ) ; +#27555 = ORIENTED_EDGE ( 'NONE', *, *, #63244, .T. ) ; +#27556 = CARTESIAN_POINT ( 'NONE', ( -10.77874659791490500, 18.16476742015635900, -28.30311934730015400 ) ) ; +#27557 = FACE_OUTER_BOUND ( 'NONE', #67949, .T. ) ; +#27558 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000001800, 51.96823913367203600, -28.70555803802997700 ) ) ; +#27559 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#27560 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 61.66666666666668600, 2.794441961969992100 ) ) ; +#27561 = VERTEX_POINT ( 'NONE', #30356 ) ; +#27562 = AXIS2_PLACEMENT_3D ( 'NONE', #17835, #67600, #55073 ) ; +#27563 = CIRCLE ( 'NONE', #1378, 10.00000000000009200 ) ; +#27564 = CARTESIAN_POINT ( 'NONE', ( -17.07207222077624900, 7.515492204769289600, -28.35345313345968400 ) ) ; +#27565 = ORIENTED_EDGE ( 'NONE', *, *, #73104, .F. ) ; +#27566 = CARTESIAN_POINT ( 'NONE', ( -3.263193040610826900, 92.73236790253352500, -28.64516875322533800 ) ) ; +#27567 = ORIENTED_EDGE ( 'NONE', *, *, #75196, .F. ) ; +#27568 = ORIENTED_EDGE ( 'NONE', *, *, #72316, .F. ) ; +#27569 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#27570 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#27571 = VERTEX_POINT ( 'NONE', #30622 ) ; +#27572 = CONICAL_SURFACE ( 'NONE', #69004, 10.50000000000009200, 0.7853981633974482800 ) ; +#27573 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27574 = AXIS2_PLACEMENT_3D ( 'NONE', #43954, #13278, #56766 ) ; +#27575 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#27576 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 84.37738371066727400, -28.70555803802997700 ) ) ; +#27577 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69844, #26366, #76098, #38812 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625870557025400E-007, 0.0002930369617397753700 ), + .UNSPECIFIED. ) ; +#27578 = ADVANCED_FACE ( 'NONE', ( #24010 ), #36619, .T. ) ; +#27579 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#27580 = EDGE_CURVE ( 'NONE', #56250, #12648, #39421, .T. ) ; +#27581 = ORIENTED_EDGE ( 'NONE', *, *, #74108, .F. ) ; +#27582 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#27583 = EDGE_LOOP ( 'NONE', ( #25309, #74288, #70769 ) ) ; +#27584 = CARTESIAN_POINT ( 'NONE', ( -17.17236817127090400, 8.913815914363743400, -28.54394830537804900 ) ) ; +#27585 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849299700, 20.32033471810044400, -28.30868034705249800 ) ) ; +#27586 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 24.00000000000000700, -1.205558038030002800 ) ) ; +#27587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27588 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 87.46443389862714900, -28.54207364681943600 ) ) ; +#27589 = EDGE_LOOP ( 'NONE', ( #68368, #79754, #68405, #80687 ) ) ; +#27590 = CIRCLE ( 'NONE', #33105, 10.00000000000009200 ) ; +#27591 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515311500, 81.01872124563909900, -28.53757464917576000 ) ) ; +#27592 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345434500, 81.32559822014181300, -28.29986836858018200 ) ) ; +#27593 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27594 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875023100, 75.13282980700491000, -28.53914313452768100 ) ) ; +#27595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27598 = ADVANCED_FACE ( 'NONE', ( #5495 ), #51164, .F. ) ; +#27599 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715851400, 55.79999999999976300, -28.70525300642641800 ) ) ; +#27600 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27601 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 15.92318720225497800, -28.70555803802992800 ) ) ; +#27602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27603 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#27604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27608 = CIRCLE ( 'NONE', #68556, 10.50000000000009600 ) ; +#27609 = EDGE_CURVE ( 'NONE', #43760, #69393, #67782, .T. ) ; +#27610 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 96.59999999999999400, 0.0000000000000000000 ) ) ; +#27611 = EDGE_CURVE ( 'NONE', #50418, #31778, #7415, .T. ) ; +#27612 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 87.46443389862670900, -28.54207364681986500 ) ) ; +#27613 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27614 = EDGE_LOOP ( 'NONE', ( #43519, #23905, #16767, #42330 ) ) ; +#27615 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654360000, 80.07527064970096800, -28.39317435246139000 ) ) ; +#27616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11378, #48584, #61156, #23888 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067964800 ), + .UNSPECIFIED. ) ; +#27617 = PLANE ( 'NONE', #23600 ) ; +#27619 = EDGE_LOOP ( 'NONE', ( #5576, #2065, #55569 ) ) ; +#27618 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27620 = EDGE_CURVE ( 'NONE', #66062, #79130, #22053, .T. ) ; +#27621 = ADVANCED_FACE ( 'NONE', ( #3523 ), #1573, .T. ) ; +#27622 = EDGE_CURVE ( 'NONE', #52661, #62561, #18138, .T. ) ; +#27623 = FACE_OUTER_BOUND ( 'NONE', #80246, .T. ) ; +#27624 = ORIENTED_EDGE ( 'NONE', *, *, #77139, .T. ) ; +#27625 = AXIS2_PLACEMENT_3D ( 'NONE', #73266, #36003, #79521 ) ; +#27626 = FACE_OUTER_BOUND ( 'NONE', #33701, .T. ) ; +#27627 = ORIENTED_EDGE ( 'NONE', *, *, #20947, .F. ) ; +#27628 = ORIENTED_EDGE ( 'NONE', *, *, #47146, .F. ) ; +#27629 = CIRCLE ( 'NONE', #18847, 9.500000000000099500 ) ; +#27630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #737, #19246, #32041, #75540 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810904800, 0.0005317208426588623500 ), + .UNSPECIFIED. ) ; +#27631 = ORIENTED_EDGE ( 'NONE', *, *, #5921, .T. ) ; +#27632 = ORIENTED_EDGE ( 'NONE', *, *, #60792, .T. ) ; +#27633 = ORIENTED_EDGE ( 'NONE', *, *, #52315, .T. ) ; +#27634 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 67.66666666666668600, 5.722645192245505700 ) ) ; +#27635 = AXIS2_PLACEMENT_3D ( 'NONE', #2147, #70425, #57935 ) ; +#27636 = EDGE_CURVE ( 'NONE', #24967, #46397, #20103, .T. ) ; +#27637 = CARTESIAN_POINT ( 'NONE', ( 18.01268492843964700, 80.30637265398596000, -28.24165217761364800 ) ) ; +#27638 = EDGE_CURVE ( 'NONE', #1596, #35308, #34692, .T. ) ; +#27639 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.73796787468680600, -28.38801640354855100 ) ) ; +#27640 = EDGE_CURVE ( 'NONE', #63310, #32513, #65845, .T. ) ; +#27641 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 27.12623792124938000, -28.70555803802994200 ) ) ; +#27643 = FACE_OUTER_BOUND ( 'NONE', #36414, .T. ) ; +#27642 = AXIS2_PLACEMENT_3D ( 'NONE', #77302, #2747, #15023 ) ; +#27644 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181873500, 51.65075715145283700, -28.20555803803047800 ) ) ; +#27645 = ORIENTED_EDGE ( 'NONE', *, *, #75664, .T. ) ; +#27646 = FACE_OUTER_BOUND ( 'NONE', #23511, .T. ) ; +#27647 = AXIS2_PLACEMENT_3D ( 'NONE', #72198, #34935, #78450 ) ; +#27648 = ORIENTED_EDGE ( 'NONE', *, *, #51040, .T. ) ; +#27649 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27650 = EDGE_LOOP ( 'NONE', ( #69594, #8324, #7397 ) ) ; +#27651 = ORIENTED_EDGE ( 'NONE', *, *, #71364, .F. ) ; +#27652 = AXIS2_PLACEMENT_3D ( 'NONE', #31890, #75403, #38102 ) ; +#27653 = CARTESIAN_POINT ( 'NONE', ( -5.727308459283261000, 75.79999999999999700, -28.53979898350160100 ) ) ; +#27654 = ORIENTED_EDGE ( 'NONE', *, *, #21813, .T. ) ; +#27655 = EDGE_CURVE ( 'NONE', #77818, #301, #11365, .T. ) ; +#27656 = FACE_OUTER_BOUND ( 'NONE', #1683, .T. ) ; +#27657 = AXIS2_PLACEMENT_3D ( 'NONE', #12091, #43340, #6101 ) ; +#27658 = AXIS2_PLACEMENT_3D ( 'NONE', #32360, #26408, #38580 ) ; +#27659 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#27660 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3224, #9483, #65560, #28320 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690709678500E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#27661 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911126200, 51.19833471562213800, -28.28704243186587400 ) ) ; +#27662 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27663 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 39.00000000000000000, -12.20555803803000200 ) ) ; +#27664 = EDGE_LOOP ( 'NONE', ( #29584, #70824, #32615, #51860 ) ) ; +#27665 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823703100, 42.40456253568395100, -28.61277292027075700 ) ) ; +#27666 = VERTEX_POINT ( 'NONE', #74919 ) ; +#27667 = CARTESIAN_POINT ( 'NONE', ( 15.82622038785847000, 85.79999999999985500, -28.34928911331561000 ) ) ; +#27668 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782548300, 90.16054007504448000, -28.34042301926905300 ) ) ; +#27669 = ORIENTED_EDGE ( 'NONE', *, *, #34145, .T. ) ; +#27670 = FACE_OUTER_BOUND ( 'NONE', #16143, .T. ) ; +#27671 = PLANE ( 'NONE', #46414 ) ; +#27672 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#27673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27674 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#27675 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819702700, 81.65075715145306400, -28.20555803803014100 ) ) ; +#27676 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27677 = ADVANCED_FACE ( 'NONE', ( #49237 ), #14231, .F. ) ; +#27678 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701700, 42.40456253568395100, -28.61277292027075700 ) ) ; +#27679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27681 = AXIS2_PLACEMENT_3D ( 'NONE', #15137, #52644, #77418 ) ; +#27682 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 80.16616330387871900, -28.27375072930956200 ) ) ; +#27683 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655689600, 41.67701665379241400, -28.20555803802997400 ) ) ; +#27684 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 1.333333333333339300, 5.722645192245503900 ) ) ; +#27685 = FACE_OUTER_BOUND ( 'NONE', #79976, .T. ) ; +#27686 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199000, 51.25732391202399200, -28.20555803802997700 ) ) ; +#27687 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686885200, 80.01994747561639100, -28.24986299608865200 ) ) ; +#27688 = VERTEX_POINT ( 'NONE', #62955 ) ; +#27689 = ADVANCED_FACE ( 'NONE', ( #32720 ), #80431, .T. ) ; +#27690 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654408800, 60.07527064970103900, -28.39317435246135800 ) ) ; +#27691 = AXIS2_PLACEMENT_3D ( 'NONE', #37624, #375, #43863 ) ; +#27692 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#27693 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .T. ) ; +#27694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27695 = ORIENTED_EDGE ( 'NONE', *, *, #12014, .T. ) ; +#27696 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 85.79999999999984100, -28.20555803803014400 ) ) ; +#27697 = EDGE_CURVE ( 'NONE', #36217, #28056, #24982, .T. ) ; +#27698 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194995600, 56.76150692817510200, -28.68631150211658100 ) ) ; +#27699 = CONICAL_SURFACE ( 'NONE', #62063, 10.00000000000009200, 0.7853981633974447300 ) ; +#27700 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 35.05000000000000400, -28.20555803802995200 ) ) ; +#27701 = ORIENTED_EDGE ( 'NONE', *, *, #14315, .F. ) ; +#27702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27703 = FACE_OUTER_BOUND ( 'NONE', #30686, .T. ) ; +#27704 = AXIS2_PLACEMENT_3D ( 'NONE', #44781, #7546, #51046 ) ; +#27705 = VERTEX_POINT ( 'NONE', #19700 ) ; +#27706 = ADVANCED_FACE ( 'NONE', ( #47290 ), #56954, .T. ) ; +#27707 = FACE_OUTER_BOUND ( 'NONE', #953, .T. ) ; +#27708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27709 = FACE_OUTER_BOUND ( 'NONE', #25312, .T. ) ; +#27710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71040, #58531, #15012, #77291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951557060200E-007, 0.0007331043932795725800 ), + .UNSPECIFIED. ) ; +#27712 = EDGE_LOOP ( 'NONE', ( #5039, #44093, #36842 ) ) ; +#27711 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465444000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#27713 = ORIENTED_EDGE ( 'NONE', *, *, #47100, .T. ) ; +#27714 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#27715 = ORIENTED_EDGE ( 'NONE', *, *, #67876, .T. ) ; +#27716 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819073900, 51.65075715145259500, -28.20555803803014100 ) ) ; +#27717 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390037600, 60.13716795162663000, -28.48697406221648600 ) ) ; +#27718 = CARTESIAN_POINT ( 'NONE', ( 10.24297557446588400, 80.16517473503358800, -28.29551658696724600 ) ) ; +#27719 = ADVANCED_FACE ( 'NONE', ( #63894 ), #12300, .T. ) ; +#27720 = CONICAL_SURFACE ( 'NONE', #38790, 10.00000000000009200, 0.7853981633974447300 ) ; +#27721 = ORIENTED_EDGE ( 'NONE', *, *, #30712, .F. ) ; +#27722 = CONICAL_SURFACE ( 'NONE', #28987, 10.00000000000009400, 0.7853981633974447300 ) ; +#27723 = EDGE_CURVE ( 'NONE', #67598, #74584, #10523, .T. ) ; +#27724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27725 = ORIENTED_EDGE ( 'NONE', *, *, #57975, .T. ) ; +#27726 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182600, 39.13131911501876200, -28.51286550264509500 ) ) ; +#27727 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 10.66666666666668400, -6.705558038030000400 ) ) ; +#27728 = ORIENTED_EDGE ( 'NONE', *, *, #50443, .F. ) ; +#27730 = EDGE_CURVE ( 'NONE', #53919, #21010, #76833, .T. ) ; +#27729 = ORIENTED_EDGE ( 'NONE', *, *, #62476, .T. ) ; +#27731 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .T. ) ; +#27732 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239700, 21.02620220503713400, -28.70555803802994200 ) ) ; +#27733 = VERTEX_POINT ( 'NONE', #63496 ) ; +#27734 = ADVANCED_FACE ( 'NONE', ( #61944 ), #59989, .T. ) ; +#27735 = FACE_OUTER_BOUND ( 'NONE', #62195, .T. ) ; +#27736 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 45.00000000000000700, -1.205558038030002800 ) ) ; +#27737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27738 = EDGE_CURVE ( 'NONE', #13694, #78096, #62380, .T. ) ; +#27739 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 10.00000000000000900, -1.205558038030005300 ) ) ; +#27740 = EDGE_CURVE ( 'NONE', #62677, #66170, #78492, .T. ) ; +#27741 = ORIENTED_EDGE ( 'NONE', *, *, #9701, .T. ) ; +#27742 = ORIENTED_EDGE ( 'NONE', *, *, #60888, .F. ) ; +#27743 = AXIS2_PLACEMENT_3D ( 'NONE', #55118, #11630, #67648 ) ; +#27744 = CARTESIAN_POINT ( 'NONE', ( 3.499999999986129800, 60.90050506339297000, -28.70555803803014400 ) ) ; +#27745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27746 = EDGE_CURVE ( 'NONE', #47186, #3836, #76495, .T. ) ; +#27747 = ORIENTED_EDGE ( 'NONE', *, *, #50350, .F. ) ; +#27748 = CARTESIAN_POINT ( 'NONE', ( 3.360598542614463100, 39.16749699759768800, -28.25434854811489100 ) ) ; +#27749 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449985700, 51.76337688193822800, -28.37223523914899600 ) ) ; +#27750 = FACE_OUTER_BOUND ( 'NONE', #30095, .T. ) ; +#27751 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 47.33333333333334300, 4.294441961970000500 ) ) ; +#27752 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27753 = AXIS2_PLACEMENT_3D ( 'NONE', #77541, #2998, #34026 ) ; +#27754 = EDGE_CURVE ( 'NONE', #35816, #5185, #47884, .T. ) ; +#27755 = CARTESIAN_POINT ( 'NONE', ( -6.852157730108388000E-014, 43.65857157145693900, -28.20555803802997700 ) ) ; +#27756 = EDGE_CURVE ( 'NONE', #5676, #29731, #16194, .T. ) ; +#27757 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 70.89350487330096900, -28.45034744217088700 ) ) ; +#27758 = EDGE_CURVE ( 'NONE', #72149, #368, #30796, .T. ) ; +#27759 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#27760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2190, #39462, #21002, #64534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389897498000E-007, 0.0008082646680357325800 ), + .UNSPECIFIED. ) ; +#27761 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#27762 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27763 = PLANE ( 'NONE', #76455 ) ; +#27764 = AXIS2_PLACEMENT_3D ( 'NONE', #48298, #54587, #29604 ) ; +#27765 = CIRCLE ( 'NONE', #68399, 10.00000000000009400 ) ; +#27766 = CARTESIAN_POINT ( 'NONE', ( 10.95972934556066900, 18.22438272935897200, -28.30310183417024900 ) ) ; +#27767 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 65.80000000000001100, -28.70555803802997700 ) ) ; +#27768 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49026, #55306, #36808, #80343 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648283233739000E-007, 0.0004318378175229009600 ), + .UNSPECIFIED. ) ; +#27769 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855320000, 73.67681279774480200, -28.70555803802997700 ) ) ; +#27770 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.15857157145701200, -28.20555803802994200 ) ) ; +#27771 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.36203212531315600, -28.38801640354855100 ) ) ; +#27772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27773 = EDGE_CURVE ( 'NONE', #80791, #23109, #45328, .T. ) ; +#27775 = CLOSED_SHELL ( 'NONE', ( #8965, #14839, #46600, #47319, #76116, #6797, #16176, #8467, #32991, #72657, #34325, #62309, #52875, #73962, #25307, #18963, #78489, #60713, #15477, #39595, #28361, #27000, #73673, #25599, #23542, #53755, #26023, #78277, #52548, #39111, #41629, #27114, #50623, #26770, #55577, #44483, #10451, #47187, #18675, #29425, #19581, #60013, #54054, #74358, #53054, #61527, #61144, #5414, #24500, #46499, #25100, #70621, #19127, #18757, #64136, #46277, #5119, #10116, #18053, #9811, #50124, #32783, #68146, #65354, #43825, #45502, #18625, #79869, #58400, #45163, #4600, #12642, #64529, #53174, #51814, #58170, #78670, #22365, #55061, #51948, #80482, #56985, #3557, #31115, #13863, #56695, #27827, #51725, #48120, #3688, #5418, #51706, #54645, #16346, #64240, #23064, #50342, #27208, #14950, #45566, #16331, #13054, #40003, #965, #22596, #25804, #8779, #18166, #19868, #42691, #54143, #1672, #6097, #3196, #28731, #30617, #49904, #73063, #46234, #58164, #62120, #74560, #28918, #31330, #6596, #21582, #60801, #57363, #16366, #5625, #23658, #70108, #6529, #53662, #68803, #55348, #48033, #36019, #72395, #2656, #51417, #30996, #18927, #26201, #55973, #18660, #72534, #33202, #25400, #33004, #41324, #64468, #12834, #18549, #69813, #32225, #79744, #28238, #41814, #57306, #31299, #74174, #79892, #13854, #57682, #39200, #14551, #12526, #23980, #14218, #72578, #54360, #73872, #22190, #75349, #17435, #75027, #77467, #30420, #21005, #76508, #24390, #68822, #72, #67700, #27301, #35513, #63648, #66140, #42178, #77568, #44607, #63095, #48223, #15013, #32578, #67236, #57093, #46899, #55495, #3855, #32702, #56095, #16050, #11333, #23178, #16274, #80066, #44786, #65717, #31418, #15547, #20481, #40609, #51622, #59716, #66834, #13040, #53787, #38284, #76036, #35652, #77554, #34904, #13950, #52846, #62238, #70023, #47023, #17443, #20682, #63598, #25272, #47227, #47822, #27734, #7065, #11459, #70206, #2647, #76526, #17375, #53350, #25610, #75537, #68501, #71757, #79963, #51337, #42999, #54863, #76460, #19236, #14117, #75337, #59837, #22881, #71726, #68036, #5272, #32205, #45800, #19177, #3679, #77154, #32024, #73954, #56548, #10744, #12130, #48831, #78754, #65343, #6117, #22251, #24698, #18239, #28341, #37465, #59523, #70949, #31209, #39787, #50017, #6818, #39518, #35919, #80147, #72267, #11241, #49020, #4097, #33384, #67304, #57886, #49727, #57280, #16885, #20081, #68337, #20266, #5990, #22176, #33103, #69698, #33833, #13241, #18938, #71565, #51412, #33683, #31515, #1858, #43576, #27314, #26525, #35157, #5094, #25582, #62322, #51715, #34719, #35695, #52237, #24179, #43108, #71435, #1159, #53842, #37095, #29174, #78142, #32309, #74137, #4774, #14161, #26069, #9736, #21206, #12242, #25479, #79579, #62210, #79053, #62733, #31902, #11432, #21777, #55243, #6593, #62707, #47140, #60020, #52921, #64435, #49232, #42382, #69332, #24586, #55363, #19046, #33788, #66512, #25725, #41222, #29243, #24571, #38160, #3277, #42327, #10604, #32192, #29551, #7796, #31233, #63935, #14560, #32566, #49711, #57968, #39188, #37793, #47204, #19477, #73839, #46023, #73454, #48722, #70334, #13158, #28866, #21168, #12347, #45595, #39713, #13077, #78376, #71042, #10429, #989, #42912, #61912, #77377, #42708, #75823, #44377, #80786, #32397, #22996, #8976, #16125, #12112, #19942, #31399, #64870, #25076, #77672, #69236, #67616, #46117, #50500, #78344, #21263, #13248, #59735, #30438, #7188, #30106, #69821, #74264, #65835, #54266, #43016, #38381, #14514, #37002, #56573, #46384, #80339, #15031, #77252, #47714, #72850, #36025, #71858, #2736, #24388, #20348, #24185, #4466, #379, #40410, #72442, #70220, #20668, #28741, #8591, #20332, #35823, #22790, #14718, #6695, #2060, #33290, #71134, #57188, #53368, #24664, #16747, #2194, #7177, #34603, #6207, #69728, #2888, #55565, #69194, #59605, #60602, #49004, #68011, #2340, #60724, #48626, #50517, #40395, #62034, #40017, #57195, #65137, #80589, #1485, #3380, #39012, #34634, #46040, #50300, #23706, #6305, #3002, #32689, #65616, #24854, #36290, #7714, #11035, #31504, #72090, #74191, #13469, #27093, #395, #8594, #55155, #47828, #52649, #7269, #35112, #77539, #69512, #10358, #21479, #63540, #55333, #66815, #63198, #74640, #71771, #35238, #58314, #49316, #70003, #6415, #20985, #13162, #9291, #27921, #12146, #67828, #73032, #63634, #28622, #76431, #55891, #10409, #62632, #73743, #64010, #56655, #66443, #11846, #70613, #58965, #61449, #36189, #75942, #15465, #33027, #73857, #14854, #74370, #4320, #52527, #74752, #69337, #29039, #27534, #47938, #25596, #65241, #33800, #46208, #23874, #53063, #50802, #54770, #56151, #18255, #24004, #54232, #75068, #1764, #62041, #41394, #64147, #59397, #12874, #47414, #48813, #6891, #79265, #62401, #33486, #17971, #562, #47045, #67549, #72368, #55466, #24675, #49819, #26398, #41495, #25191, #37069, #26913, #54255, #9837, #14066, #74745, #28643, #15414, #24777, #29807, #31829, #19997, #48319, #7915, #32467, #55170, #9272, #20750, #36617, #20364, #66127, #37506, #72838, #43867, #30506, #70492, #5201, #13441, #79095, #66105, #37888, #50725, #40590, #75544, #33693, #36571, #23165, #19539, #22775, #52963, #22573, #66943, #6210, #22746, #3163, #56363, #68094, #29820, #40838, #4687, #68, #65563, #30912, #11008, #49741, #4278, #72057, #41329, #11736, #76968, #75433, #25291, #38089, #3812, #7008, #70811, #32105, #54948, #77655, #13782, #13943, #31781, #41129, #26924, #33617, #39383, #54087, #61930, #71312, #37402, #68631, #39924, #9410, #1048, #60926, #28042, #27677, #49008, #7892, #43244, #14344, #53579, #33504, #62809, #71367, #24094, #3398, #69029, #48745, #15249, #1087, #1272, #25259, #53156, #30228, #49489, #36489, #1846, #32092, #16583, #29441, #59477, #41608, #65930, #56487, #45928, #42312, #19142, #24489, #64538, #77730, #39811, #1077, #23969, #60312, #59912, #68100, #56048, #12037, #68227, #55765, #75346, #9280, #58684, #70122, #71127, #22084, #1401, #75705, #21891, #45170, #23239, #34704, #8191, #28429, #64357, #33318, #29726, #59585, #50318, #27193, #67209, #34005, #16642, #75753, #30598, #24085, #68300, #80161, #20649, #25995, #74176, #78237, #37790, #74570, #24975, #36679, #77047, #32605, #35140, #21689, #73170, #49606, #36604, #36230, #61331, #1171, #1678, #32889, #65840, #76740, #57463, #41140, #5314, #50233, #2570, #41115, #44301, #65631, #39935, #67321, #73647, #37987, #44277, #41622, #40679, #56164, #45997, #14647, #50933, #22466, #40034, #25920, #11934, #50385, #4607, #77023, #19950, #59160, #58783, #58976, #43436, #36974, #23563, #57806, #44761, #4396, #53382, #8905, #42421, #26598, #57778, #59499, #25800, #21969, #58291, #34214, #44811, #73248, #68628, #1447, #41227, #30533, #14233, #50533, #78582, #19374, #8804, #38270, #52226, #65530, #12066, #47999, #76343, #55846, #77866, #68706, #35925, #80566, #75938, #24983, #1466, #68429, #2174, #52933, #284, #75148, #1978, #11623, #49806, #36398, #3685, #61725, #4868, #6907, #18773, #76745, #50001, #10334, #51696, #44368, #80374, #7087, #56782, #63734, #739, #10129, #36702, #2587, #8359, #23104, #30913, #10109, #40289, #8884, #41997, #20382, #7307, #54847, #3286, #37180, #29946, #6396, #52519, #49223, #29412, #37111, #34518, #68396, #22577, #70085, #29526, #37483, #56462, #65116, #42634, #73326, #47607, #22170, #5508, #51595, #80264, #43907, #24791, #10621, #38689, #17332, #3459, #52425, #17050, #51231, #13430, #16654, #66237, #8513, #37672, #60829, #65070, #21051, #20253, #10502, #51926, #19058, #44085, #6084, #73439, #58875, #50947, #28651, #23474, #63506, #30338, #28456, #22476, #11756, #41210, #71854, #70629, #59811, #4200, #8981, #61128, #64924, #74283, #50638, #67599, #53576, #45622, #17170, #2244, #32484, #53735, #38190, #18323, #46406, #4880, #40112, #35529, #42598, #60611, #31110, #69592, #17674, #50009, #61928, #41989, #45394, #3274, #22263, #31284, #77150, #32967, #755, #28604, #44183, #9942, #21068, #38191, #62797, #72165, #42810, #74058, #16227, #31718, #77439, #46008, #26516, #78783, #60994, #65369, #7509, #67023, #12532, #59005, #33777, #51301, #30143, #19960, #6521, #38878, #22655, #76349, #49586, #30119, #41924, #28952, #20851, #55072, #71208, #14537, #30056, #4763, #77255, #3982, #7198, #38385, #59513, #6506, #42825, #25488, #16073, #9166, #11671, #44292, #9081, #72548, #26205, #47215, #5690, #21593, #64058, #43399, #10650, #55262, #70746, #2468, #15730, #74088, #75738, #32515, #75425, #53775, #62007, #59095, #3783, #48135, #61821, #21397, #57185, #37195, #7571, #49626, #3963, #13355, #59072, #77452, #64044, #17742, #35713, #20193, #44656, #25168, #15765, #65739, #21559, #64020, #7676, #80798, #35325, #2078, #6380, #27219, #8060, #48417, #52213, #61634, #3052, #38003, #76941, #61094, #44703, #24468, #62193, #64656, #13550, #29274, #68025, #6806, #18845, #30585, #48106, #1586, #27507, #40426, #47915, #63452, #56964, #68410, #34134, #22079, #8852, #80262, #75838, #40805, #74289, #15736, #49935, #5186, #39619, #51284, #68899, #4010, #35628, #33094, #70407, #56576, #59901, #63129, #33814, #36307, #31901, #10643, #25179, #30925, #73822, #19978, #62847, #48307, #33906, #5807, #55749, #45986, #38667, #23605, #11541, #41593, #53035, #10754, #65916, #45088, #30882, #48405, #51639, #57987, #13827, #38072, #15660, #20467, #73278, #17034, #50629, #52146, #79570, #18136, #30028, #75141, #69985, #50401, #46793, #18456, #29028, #4672, #72264, #34181, #45578, #61542, #45184, #25708, #62434, #28834, #29146, #64762, #58786, #23186, #62823, #58773, #75635, #19675, #58572, #67942, #26606, #44360, #47405, #30811, #27183, #31124, #47601, #8286, #473, #54658, #65041, #1199, #4493, #45009, #67434, #9640, #34726, #55762, #32974, #42725, #35882, #57476, #22451, #37905, #70313, #27008, #16144, #250, #71033, #1946, #42107, #50112, #46096, #30632, #28760, #46908, #2272, #60123, #36214, #29358, #68912, #58392, #71620, #49144, #17834, #15651, #29333, #57581, #37075, #20793, #25058, #32292, #63519, #24779, #59895, #44289, #27706, #35903, #10635, #73638, #10824, #51128, #48628, #71673, #40825, #14224, #73772, #3664, #51513, #57999, #37356, #2280, #52228, #79478, #41542, #48216, #2454, #65860, #45701, #34079, #13357, #2984, #13021, #80346, #16044, #4503, #70399, #19854, #60238, #27689, #5670, #79170, #71438, #23076, #42111, #18643, #9207, #30520, #55164, #37497, #51425, #1871, #24756, #39396, #54888, #29711, #32111, #63335, #3580, #67710, #58700, #55652, #22889, #42608, #56767, #5820, #38172, #22696, #35537, #51019, #43969, #46420, #12430, #35544, #45466, #50809, #66353, #22346, #4476, #75472, #11219, #69539, #49411, #28232, #57470, #71838, #28819, #21866, #57794, #9929, #20875, #72953, #66054, #41702, #26987, #65472, #75157, #36142, #6809, #35788, #27512, #69250, #9723, #64849, #61798, #78793, #39320, #62920, #7966, #36802, #61942, #39501, #47699, #47310, #64953, #75328, #65362, #44774, #29738, #47689, #3262, #24888, #72775, #75949, #61896, #1882, #78294, #31010, #69105, #74854, #46634, #6603, #48345, #3568, #46817, #2382, #40518, #10242, #25395, #18059, #658, #10042, #27293, #7294, #20977, #27416, #66630, #46504, #58256, #23778, #15534, #4212, #15132, #7401, #40203, #55675, #60700, #1144, #12625, #65645, #77074, #68115, #546, #37283, #58899, #7779, #14922, #25180, #54132, #37800, #14654, #63655, #22479, #67124, #1784, #69234, #52536, #39103, #71867, #76051, #73559, #36998, #39082, #17128, #53452, #68924, #20562, #59180, #78164, #62296, #17850, #23587, #73163, #56264, #27381, #36716, #19347, #52018, #27928, #66420, #20074, #37865, #40316, #57913, #17956, #49114, #39738, #44676, #43127, #68444, #23257, #13483, #53871, #15561, #38489, #43313, #43496, #64822, #55362, #26498, #50918, #62413, #78573, #71642, #26805, #61109, #17063, #59925, #10739, #30239, #8179, #19250, #35025, #38207, #13559, #31386, #3372, #30790, #8305, #13344, #15017, #48893, #8480, #8685, #23452, #75659, #61719, #54363, #30898, #71251, #13841, #79490, #67426, #16721, #13455, #18766, #26304, #66654, #27809, #44898, #3068, #12459, #26814, #29348, #22378, #58713, #55861, #76336, #26788, #28524, #55049, #65452, #54670, #60024, #50216, #42927, #34952, #62723, #72151, #62383, #70937, #45223, #17556, #36872, #53879, #14466, #11947, #53689, #16744, #37011, #79955, #70512, #22857, #26117, #15145, #67824, #25575, #21508, #7790, #35042, #43202, #34833, #61626, #52350, #43326, #50413, #37583, #49296, #66914, #45202, #41618, #77966, #62112, #79663, #77765, #43126, #79151, #19160, #6128, #3469, #37708, #39412, #39063, #4791, #65284, #71981, #13169, #2260, #19466, #42282, #65047, #19118, #47016, #18533, #45822, #19658, #1062, #49226, #53342, #12950, #58669, #49636, #11822, #52131, #60409, #7694, #50543, #10226, #67105, #7162, #40226, #11363, #68545, #69912, #80396, #57586, #7997, #40932, #39424, #48018, #16856, #74653, #2044, #61244, #77326, #11269, #10909, #58496, #16246, #17940, #15045, #42408, #70597, #62609, #59321, #40190, #8371, #23910, #79453, #46213, #32304, #339, #36691, #27719, #5300, #72671, #11641, #58104, #25794, #57759, #30713, #63104, #72483, #4498, #9696, #50016, #64828, #80685, #62114, #42790, #58277, #16728, #44797, #58491, #31838, #16359, #4292, #44268, #70894, #73371, #63221, #20167, #60541, #38793, #14149, #42299, #45512, #27002, #50098, #52570, #80769, #68714, #27578, #475, #20654, #42226, #68825, #41900, #8690, #78253, #50422, #19666, #12617, #15840, #24071, #77058, #9506, #76266, #23694, #67914, #4103, #79772, #20584, #44082, #38962, #47725, #6413, #52118, #43316, #30202, #76637, #53859, #57105, #70716, #44016, #28639, #29608, #21279, #41416, #35632, #27621, #15554, #27286, #73759, #26088, #73552, #75444, #9386, #31023, #63427, #53976, #47091, #1279, #49537, #26415, #43094, #53161, #29717, #63948, #64144, #50889, #35435, #62389, #3591, #53955, #15065, #37083, #75232, #48523, #56065, #27942, #57573, #64726, #37594, #63920, #54498, #74959, #23159, #39716, #9709, #31729, #56776, #49690, #28116, #61212, #64460, #71539, #32618, #60816, #24251, #16371, #56360, #20237, #41049, #29046, #12538, #58262, #11417, #1964, #51923, #25318, #66705, #33509, #72459, #38110, #72760, #49210, #79884, #66848, #59985, #56671, #21661, #68130, #13656, #38390, #46295, #5939, #7585, #80244, #34419, #20277, #7258, #18743, #60118, #2397, #74276, #6679, #29845, #68316, #43707, #60638, #31316, #60297, #71742, #37998, #20775, #69743, #17155, #17345, #32806, #12750, #26384, #68812, #78188, #66145, #59062, #70499, #55376, #55571, #48478, #39096, #10207, #75455, #33195, #31433, #40819, #16935, #14748, #22671, #44208, #61328, #12920, #53963, #80252, #33721, #2882, #14617, #30129, #63206, #72960, #60922, #10194, #6897, #2861, #43236, #19760, #16479, #77141, #34503, #69420, #27598, #36922, #13772, #5584, #65461, #72944, #26428, #45295, #69288, #72564, #24861, #21980, #16447, #39539, #74452, #44882, #76929, #76123, #10855, #37390, #66407, #27100, #21958, #74969, #19244, #61995, #40303, #48496, #23269, #59620, #79369, #63843, #18842, #61338, #3497, #78384, #65226, #74557, #26882, #30710, #51315, #72248, #781, #39297, #68554, #22074, #78962, #45717, #34925, #25513, #58183, #74929, #35244, #5599, #70839, #64948, #20741, #11349, #69307, #4407, #11141, #72237, #43997, #15116, #49325, #56882, #78508, #33497, #46694, #875, #64740, #24311, #50823, #73736, #71544, #4384, #7594, #32694, #50486, #28941, #9588, #44494, #69619, #61505, #1496, #20470, #47615, #80747, #14667, #80361, #49512, #40134, #20065, #74757, #51201, #66759, #12541, #77842, #50026, #23678, #34000, #79185, #36470, #34730, #54468, #38918, #43888, #59427, #53478, #40283, #49624, #1953, #5811, #26505, #56680, #43626, #77952, #54042, #20878, #10022, #590, #61517, #40023, #76608, #67229, #60338, #47285, #31996, #8586, #21842, #80189, #26008, #48793, #46606, #63555, #25670, #3996, #12226, #34223, #59707, #76658, #5707, #162, #23278, #36889, #77273, #7384, #33275, #12354, #38569, #72870, #80673, #35007, #19464, #34200, #6427, #62505, #74249, #2758, #11021, #14247, #15244, #57114, #66523, #48700, #46917, #66729, #26330, #6200, #19844, #23785, #257, #46735, #15948, #77425, #68022, #70097, #48847, #42921, #48089, #38679, #59596, #44010, #26702, #31031, #34312, #66312, #33111, #53258, #72372, #58189, #27409, #54580, #31794, #16664, #23379, #3653, #31411, #58375, #67738, #75244, #40947, #20868, #36522, #11318, #58883, #41514, #19880, #68887, #55447, #71345, #71950, #8104, #48926, #37266, #60443, #24276, #69407, #49421, #75720, #35357, #18258, #72140, #62722, #2743, #43521, #49812, #61597, #21183, #54243, #57489, #2559, #44410, #4092, #36106, #46513, #78978, #13687, #18450, #32083, #17258, #74542, #65160, #77963, #39899, #5616, #1562, #5216, #30330, #35499, #26102, #15924, #12656, #14037, #49341, #71427, #53645, #26609, #46712, #80641, #34837, #14736, #26486, #43986, #35054, #43604, #76723, #12268, #9401, #16536, #9610, #68741, #70418, #43489, #8403, #2474, #47627, #40336, #8571, #48937, #31610, #78086, #76733, #17782, #50414, #48398, #40121, #22756, #50833, #50090, #61610, #78067, #79974, #74440, #66531, #61425, #76864, #75530, #41451, #28506, #74957, #8870, #55967, #2369, #788, #73233, #52653, #80467, #13333, #23382, #24766, #59188, #11746, #7660, #17465, #36394, #66499, #7285, #22062, #43615, #44991, #4626, #21676, #59796, #63744, #77741, #6337, #38995, #55743, #71958, #67219, #70429, #51820, #7651, #79083, #75041, #72175, #72752, #77480, #24876, #33076, #36316, #12850, #40540, #14334, #52413, #25409, #45485, #67148, #12951, #66796, #33603, #22354, #75358, #44488, #37451, #40714, #48910, #21197, #34410, #20391, #48511, #12015, #29051, #23885, #45416, #69018, #63909, #67838, #19448, #3919, #72662, #15815, #31312, #77034, #12160, #68221, #55040, #20762, #78772, #1182, #14834, #68939, #53472, #54439, #46120, #66321, #56917, #18051, #642, #60529, #36986, #52450, #40420, #52100, #17865, #50901, #4801, #17670, #22838, #19559, #34299, #55873, #7487, #78914, #64941, #72040, #26214, #9182, #74482, #51216, #68005, #78069, #54563, #8010, #8183, #75810, #60324, #6490, #28555, #78895, #39950, #62021, #19320, #73463, #172, #52778, #1668, #8759, #62513, #7981, #79399, #19050, #47986, #64640, #34613, #56587, #870, #74629, #52948, #5288, #8495, #15647, #57511, #4892, #49100, #41229, #36114, #26727, #465, #45067, #73965, #31700, #65957, #53876, #77833, #37389, #2351, #18268, #49417, #36278, #26895, #4085, #38298, #76838, #50144, #9822, #10813, #58404, #16553, #63039, #80061, #6788, #16860, #74157, #77558, #8459, #32186, #10956, #54758, #4074, #767, #46485, #35258, #71221, #32501, #24354, #10921, #45099, #14340, #32180, #66431, #43591, #15853, #4194, #27336, #18350, #31589, #38779, #68638, #14129, #4709, #56165, #4377, #45808, #15825, #68839, #62924, #55832, #59083, #42393, #45611, #52757, #13871, #42007, #5489, #78395, #42195, #57706, #37579, #51181, #80074, #12934, #22286, #10234, #3144, #43510, #14632, #80277, #80476, #73420, #64030, #35126, #19569, #58078, #56283, #65730, #41796, #39623, #47509, #69145, #5407, #37771, #78899, #58609, #27818, #39483, #17076, #4998, #27798, #41351, #21271, #59373, #47850, #33895, #51023, #34103, #18583, #76137, #79463, #32898, #56252, #22971, #6110, #44168, #17571, #49915, #21802, #32877, #23502, #43909, #72936, #694, #18727, #77854, #30215, #33413, #1597, #29836, #74042, #66153, #61017, #51546, #56561, #78788, #21941, #43139, #74360, #61191, #63237, #75079, #2481, #7118, #31683, #41709, #18245, #21684, #33367, #23992, #57079, #35831, #79662, #29017, #25695, #71412, #12257, #38468, #60143, #71025, #53246, #63341, #15341, #30834, #57388, #49200, #59293, #35803, #70036, #39194, #57066, #10536, #68519, #40734, #29144, #52157, #43220, #56456, #54680, #12439, #34030, #63730, #70797, #12765, #38981, #29639, #272, #29313, #70723, #40695, #12967, #6999, #80736, #3181, #67310, #70527, #77646, #38703, #66929, #30414, #62494, #24191, #37779, #35147, #28091, #68428, #39491, #24402, #24578, #17537, #8084, #59997, #44392, #2169, #64546, #13270, #30325, #62687, #22979, #24374, #2681, #64416, #54964, #41934, #29939, #31811, #52624, #44574, #66257, #46110, #28415, #13563, #77350, #61852, #38583, #30501, #9512, #41911, #76148, #70212, #38255, #41527, #49699, #46828, #10329, #33422, #24477, #62586, #4910, #43407, #9101, #13940, #45888, #18853, #45075, #35742, #62325, #35419, #76845, #46805, #43926, #69026, #30980, #65253, #17545, #76650, #2980, #75867, #73050, #61417, #53484, #43696, #7562, #53282, #47315, #18658, #76623, #79543, #76238, #8275, #12676, #15942, #47902, #3882, #75268, #36385, #19018, #39840, #33903, #54174, #41195, #33884, #18363, #25890, #47428, #27399, #43035, #44690, #11727, #40521, #79071, #57400, #78683, #28132, #78483, #70549, #74827, #42016, #5910, #71144, #1264, #16976, #78664, #63115, #31510, #43183, #71329, #8098, #60425, #15952, #55960, #13737, #42523, #74943, #40637, #9830, #46367, #6015, #8076, #17875, #11942, #66903, #32591, #78361, #13068, #24905, #28226, #60195, #47111, #6721, #8384, #56140, #16454, #42700, #52048, #21276, #57858, #73358, #25684, #10548, #17246, #53433, #364, #77132, #5723, #69119, #34853, #14728, #28007, #62934, #45897, #5533, #63118, #5180, #52763, #10517, #69626, #44890, #6883, #16261, #49304, #65263, #40927, #2000, #67724, #6282, #29447, #18145, #8715, #69603, #12147, #41104, #21570, #12551, #43704, #55435, #70922, #73039, #51329, #52321, #38307, #22872, #5083, #68211, #11143, #37373, #3102, #46915, #58650, #76224, #54975, #60395, #69716, #56274, #63820, #18380, #47497, #45300, #65542, #74881, #76542, #74531, #3786, #54956, #64374, #64542, #76212, #10938, #37873, #78695, #60519, #46429, #68533, #45686, #79986, #37682, #34441, #57981, #15322, #44091, #64337, #79800, #677, #54545, #21377, #28929, #57014, #7392, #56235, #28541, #11829, #2774, #28337, #14265, #61230, #80549, #47730, #67517, #33222, #866, #32871, #47533, #60434, #39911, #55778, #17922, #33402, #33594, #6927, #58789, #60215, #19784, #30704, #79274, #80656, #15372, #34317, #63616, #48433, #77939, #51102, #52637, #10011, #69826, #28018, #37305, #73338, #76556, #2074, #38656, #54158, #352, #2795, #63003, #67329, #43800, #45286, #58558, #56371, #51608, #191, #36199, #45705, #1550, #10143, #66627, #21609, #51803, #9535, #21463, #61045, #31720, #60694, #52328, #66020, #13371, #69412, #6474, #34622, #42798, #8897, #59288, #70138, #11446, #5900, #17761, #64268, #6988, #61732, #69215, #78604, #66528, #65611, #270, #70910, #6027, #37190, #24060, #64448, #72643, #75855, #64634, #37919, #72256, #79358, #8991, #35337, #50744, #36789, #19426, #29534, #6002, #46322, #9408, #21152, #67630, #69705, #54592, #42512, #72629, #69321, #28210, #74663, #1365, #41732, #2878, #41012, #43784, #11044, #55660, #15270, #51011, #51996, #84, #57373, #41840, #43511, #16628, #58083, #28100, #56182, #50224, #12212, #15448, #79555, #57901, #9077, #26123, #29437, #67495, #65744, #29620, #69936, #24966, #38560, #11550, #19031, #34545, #59613, #71300, #80672, #57870, #67642, #36792, #60786, #1575, #47297, #62836, #14444, #74679, #53049, #29218, #51823, #41020, #31638, #33301, #25152, #66244, #36589, #21106, #15140, #26867, #17453, #19548, #35447, #67017, #22440, #75054, #71011, #55484, #63013, #53598, #39612, #52830, #31910, #14931, #55284, #57004, #79848, #21781, #35423, #38595, #38787, #56639, #66037, #18336, #9304, #9922, #51741, #11837, #31200, #79192, #67922, #58511, #63326, #64314, #18460, #13757, #79014, #6018, #66005, #676, #15430, #62333, #12758, #24456, #64838, #17141, #76251, #21371, #63257, #16736, #30010, #59192, #16957, #32421, #12343, #25977, #5006 ) ) ; +#27774 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571446600, 20.52858243452105900, -28.70555803802995200 ) ) ; +#27776 = CIRCLE ( 'NONE', #56738, 5.000000000000000900 ) ; +#27777 = AXIS2_PLACEMENT_3D ( 'NONE', #15226, #58731, #21507 ) ; +#27778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27779 = AXIS2_PLACEMENT_3D ( 'NONE', #65441, #28179, #71668 ) ; +#27780 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27781 = ORIENTED_EDGE ( 'NONE', *, *, #29775, .F. ) ; +#27782 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39547, #76814, #58320, #21080 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0009376786059871869200 ), + .UNSPECIFIED. ) ; +#27783 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.15857157145701200, -28.20555803802994200 ) ) ; +#27784 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 60.90050506338789700, -28.70555803803030800 ) ) ; +#27785 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844502500, 55.80000000000000400, -28.20555803802997700 ) ) ; +#27786 = CIRCLE ( 'NONE', #23446, 10.00000000000009400 ) ; +#27787 = FACE_OUTER_BOUND ( 'NONE', #45313, .T. ) ; +#27788 = VERTEX_POINT ( 'NONE', #45455 ) ; +#27789 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 50.83333333333335000, -9.205558038030003900 ) ) ; +#27790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27791 = CARTESIAN_POINT ( 'NONE', ( 2.254657264815457900, 41.50380841767820800, -28.64142799534456800 ) ) ; +#27792 = ORIENTED_EDGE ( 'NONE', *, *, #29353, .T. ) ; +#27793 = FACE_OUTER_BOUND ( 'NONE', #73155, .T. ) ; +#27794 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#27795 = VERTEX_POINT ( 'NONE', #20766 ) ; +#27796 = ORIENTED_EDGE ( 'NONE', *, *, #75026, .T. ) ; +#27797 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995000, 49.13176086632792300, -28.70555803802996700 ) ) ; +#27798 = ADVANCED_FACE ( 'NONE', ( #26894 ), #24932, .T. ) ; +#27799 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27800 = AXIS2_PLACEMENT_3D ( 'NONE', #34596, #78092, #40827 ) ; +#27801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27802 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27803 = CIRCLE ( 'NONE', #80636, 10.00000000000009200 ) ; +#27804 = CIRCLE ( 'NONE', #215, 10.00000000000009200 ) ; +#27805 = AXIS2_PLACEMENT_3D ( 'NONE', #14596, #58110, #20864 ) ; +#27806 = VERTEX_POINT ( 'NONE', #58283 ) ; +#27807 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999991100, 48.16666666666667100, 0.9380355014189836200 ) ) ; +#27808 = ORIENTED_EDGE ( 'NONE', *, *, #48168, .F. ) ; +#27809 = ADVANCED_FACE ( 'NONE', ( #10341 ), #72636, .F. ) ; +#27810 = EDGE_CURVE ( 'NONE', #40694, #2995, #8346, .T. ) ; +#27811 = VERTEX_POINT ( 'NONE', #2497 ) ; +#27812 = ORIENTED_EDGE ( 'NONE', *, *, #65641, .F. ) ; +#27813 = AXIS2_PLACEMENT_3D ( 'NONE', #47606, #10387, #53883 ) ; +#27814 = ORIENTED_EDGE ( 'NONE', *, *, #18180, .T. ) ; +#27815 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73838, #30345, #80084, #42797 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202239665400E-007, 0.0008724366121406981400 ), + .UNSPECIFIED. ) ; +#27816 = PLANE ( 'NONE', #56656 ) ; +#27818 = ADVANCED_FACE ( 'NONE', ( #28891 ), #22983, .F. ) ; +#27817 = VERTEX_POINT ( 'NONE', #46013 ) ; +#27819 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 16.00000000000000700, 6.794441961969995200 ) ) ; +#27820 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 70.52242369685795600, -28.53861367218593900 ) ) ; +#27821 = CIRCLE ( 'NONE', #78177, 10.50000000000009600 ) ; +#27822 = AXIS2_PLACEMENT_3D ( 'NONE', #12783, #75050, #62542 ) ; +#27823 = ORIENTED_EDGE ( 'NONE', *, *, #75046, .T. ) ; +#27824 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20769, #14774, #21044, #64575 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885673997766700E-007, 0.0007987728781051964100 ), + .UNSPECIFIED. ) ; +#27825 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362737700, 87.56528145730348500, -28.66119098264621800 ) ) ; +#27826 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 70.16349705304867300, -28.30782889147482400 ) ) ; +#27827 = ADVANCED_FACE ( 'NONE', ( #74576 ), #70654, .F. ) ; +#27828 = CONICAL_SURFACE ( 'NONE', #30054, 10.50000000000009600, 0.7853981633974518300 ) ; +#27829 = AXIS2_PLACEMENT_3D ( 'NONE', #50399, #31960, #6924 ) ; +#27830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27831 = ORIENTED_EDGE ( 'NONE', *, *, #13923, .T. ) ; +#27832 = CONICAL_SURFACE ( 'NONE', #22042, 10.00000000000009200, 0.7853981633974447300 ) ; +#27833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27834 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 19.33333333333333600, -5.535685056952199400 ) ) ; +#27835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27836 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27837 = CARTESIAN_POINT ( 'NONE', ( -16.45764012468389100, 65.17573043145938500, -28.60339038649757300 ) ) ; +#27838 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 59.50000000000002100, -7.061964498581016200 ) ) ; +#27839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27840 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825480200, 60.16054007504464400, -28.34042301926889700 ) ) ; +#27841 = EDGE_CURVE ( 'NONE', #12492, #24597, #33442, .T. ) ; +#27842 = CONICAL_SURFACE ( 'NONE', #43826, 10.00000000000009400, 0.7853981633974447300 ) ; +#27843 = EDGE_CURVE ( 'NONE', #30417, #79804, #18979, .T. ) ; +#27844 = FACE_OUTER_BOUND ( 'NONE', #63672, .T. ) ; +#27845 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.43250300240229200, -28.20555803802997700 ) ) ; +#27846 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385600, 60.16349705304866500, -28.30782889147482400 ) ) ; +#27847 = CARTESIAN_POINT ( 'NONE', ( 9.343046065457414800, 79.08026449164026400, -28.70555803803160400 ) ) ; +#27848 = EDGE_LOOP ( 'NONE', ( #11022, #12426, #21838 ) ) ; +#27849 = CIRCLE ( 'NONE', #11377, 10.50000000000009900 ) ; +#27850 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656745000, 18.35339758437769200, -28.20555803803025800 ) ) ; +#27851 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427200, 22.67681279774499400, -28.70555803802995200 ) ) ; +#27852 = EDGE_CURVE ( 'NONE', #27795, #48317, #4529, .T. ) ; +#27853 = ORIENTED_EDGE ( 'NONE', *, *, #67185, .F. ) ; +#27854 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 79.81066373133501200, -28.53923937255172300 ) ) ; +#27855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27856 = CARTESIAN_POINT ( 'NONE', ( 2.107689023311820600E-013, 67.94142842854276400, -28.20555803802997700 ) ) ; +#27857 = CONICAL_SURFACE ( 'NONE', #71338, 10.50000000000009800, 0.7853981633974518300 ) ; +#27858 = CIRCLE ( 'NONE', #12653, 10.00000000000009400 ) ; +#27859 = EDGE_CURVE ( 'NONE', #34852, #74910, #70838, .T. ) ; +#27860 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 21.83333333333333600, 0.1341879241256075400 ) ) ; +#27861 = ORIENTED_EDGE ( 'NONE', *, *, #45066, .T. ) ; +#27862 = EDGE_CURVE ( 'NONE', #11805, #58067, #58014, .T. ) ; +#27863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27864 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76794, #2252, #8503, #52006 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678003560500, 0.0007670610367933437400 ), + .UNSPECIFIED. ) ; +#27865 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#27866 = FACE_OUTER_BOUND ( 'NONE', #43816, .T. ) ; +#27867 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 69.94924284854654700, -28.20555803803014400 ) ) ; +#27868 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#27869 = ORIENTED_EDGE ( 'NONE', *, *, #8282, .F. ) ; +#27870 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42687, #79982, #55204, #17964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635049015000E-007, 0.0004064396303281463200 ), + .UNSPECIFIED. ) ; +#27871 = CARTESIAN_POINT ( 'NONE', ( 16.87500833473034900, 81.58737389638845600, -28.29936525552462000 ) ) ; +#27872 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 60.16054007504465100, -28.34042301926881200 ) ) ; +#27874 = ORIENTED_EDGE ( 'NONE', *, *, #49399, .F. ) ; +#27873 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459516700, 82.51973550835644700, -28.70555803803008400 ) ) ; +#27875 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#27876 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880587800, 14.67103694117762400, -28.53160243214818700 ) ) ; +#27877 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 41.43250300240230600, -28.20555803802997700 ) ) ; +#27878 = AXIS2_PLACEMENT_3D ( 'NONE', #31511, #62507, #75023 ) ; +#27879 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 81.99560977511663400, -28.70555803802997700 ) ) ; +#27880 = EDGE_CURVE ( 'NONE', #25026, #22200, #6428, .T. ) ; +#27881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27882 = EDGE_CURVE ( 'NONE', #23819, #24894, #56368, .T. ) ; +#27883 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390331600, 81.46283204837320100, -28.48697406221674900 ) ) ; +#27884 = EDGE_CURVE ( 'NONE', #80393, #67137, #41918, .T. ) ; +#27885 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#27886 = CIRCLE ( 'NONE', #72789, 10.00000000000009400 ) ; +#27887 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27888 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#27889 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69917, #32662, #26705, #70183 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001008322012793431300, 0.0003934298461347595200 ), + .UNSPECIFIED. ) ; +#27890 = FACE_OUTER_BOUND ( 'NONE', #77097, .T. ) ; +#27891 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#27892 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280410900, 26.44142842854297000, -28.37229765499281000 ) ) ; +#27893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27894 = EDGE_LOOP ( 'NONE', ( #15605, #60186, #1697, #17186, #76359 ) ) ; +#27895 = AXIS2_PLACEMENT_3D ( 'NONE', #26577, #57553, #63828 ) ; +#27896 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27898 = VERTEX_POINT ( 'NONE', #71892 ) ; +#27899 = ORIENTED_EDGE ( 'NONE', *, *, #26325, .T. ) ; +#27900 = ORIENTED_EDGE ( 'NONE', *, *, #29775, .T. ) ; +#27901 = EDGE_LOOP ( 'NONE', ( #8025, #72227, #19330 ) ) ; +#27902 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#27903 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#27904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27905 = FACE_OUTER_BOUND ( 'NONE', #23826, .T. ) ; +#27906 = FACE_OUTER_BOUND ( 'NONE', #12654, .T. ) ; +#27907 = AXIS2_PLACEMENT_3D ( 'NONE', #968, #44450, #7216 ) ; +#27908 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 41.24660241562190100, -28.20555803802996700 ) ) ; +#27909 = AXIS2_PLACEMENT_3D ( 'NONE', #22083, #59342, #77830 ) ; +#27910 = EDGE_LOOP ( 'NONE', ( #10696, #1058, #6868 ) ) ; +#27911 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46082, #2567, #15102, #58624 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785988615900, 0.001246815221881934800 ), + .UNSPECIFIED. ) ; +#27912 = AXIS2_PLACEMENT_3D ( 'NONE', #29787, #73276, #36011 ) ; +#27913 = ORIENTED_EDGE ( 'NONE', *, *, #5905, .T. ) ; +#27914 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000049900, 69.63176086632780900, -28.70555803803030800 ) ) ; +#27915 = ORIENTED_EDGE ( 'NONE', *, *, #55949, .T. ) ; +#27916 = CYLINDRICAL_SURFACE ( 'NONE', #76348, 10.00000000000000000 ) ; +#27917 = ORIENTED_EDGE ( 'NONE', *, *, #55999, .T. ) ; +#27918 = ORIENTED_EDGE ( 'NONE', *, *, #21319, .T. ) ; +#27919 = FACE_OUTER_BOUND ( 'NONE', #22396, .T. ) ; +#27920 = CARTESIAN_POINT ( 'NONE', ( 8.899882735204322200, 45.54999999999999700, -28.53808257741934200 ) ) ; +#27921 = ADVANCED_FACE ( 'NONE', ( #41465 ), #4469, .F. ) ; +#27922 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 65.50000000000001400, -7.061964498581022400 ) ) ; +#27923 = AXIS2_PLACEMENT_3D ( 'NONE', #27160, #70650, #33396 ) ; +#27924 = EDGE_CURVE ( 'NONE', #25886, #13063, #27485, .T. ) ; +#27925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47479, #28807, #34762, #10266 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399031910491300E-007, 0.0009968645831863124800 ), + .UNSPECIFIED. ) ; +#27926 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#27927 = ORIENTED_EDGE ( 'NONE', *, *, #49291, .T. ) ; +#27928 = ADVANCED_FACE ( 'NONE', ( #39500 ), #52130, .F. ) ; +#27929 = CARTESIAN_POINT ( 'NONE', ( -2.747461450712085000E-014, 15.70389005397400000, -28.37519436813177600 ) ) ; +#27930 = CIRCLE ( 'NONE', #13627, 10.00000000000009200 ) ; +#27931 = ORIENTED_EDGE ( 'NONE', *, *, #71076, .T. ) ; +#27932 = CARTESIAN_POINT ( 'NONE', ( 16.48638455847728300, 92.34319227923863600, -28.59447410321735800 ) ) ; +#27933 = EDGE_CURVE ( 'NONE', #25412, #17621, #68709, .T. ) ; +#27934 = CONICAL_SURFACE ( 'NONE', #46175, 10.50000000000009200, 0.7853981633974482800 ) ; +#27935 = AXIS2_PLACEMENT_3D ( 'NONE', #74677, #37372, #128 ) ; +#27936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27937 = EDGE_LOOP ( 'NONE', ( #78065, #1811, #48392 ) ) ; +#27938 = EDGE_LOOP ( 'NONE', ( #43984, #882, #19148 ) ) ; +#27939 = CIRCLE ( 'NONE', #80109, 9.500000000000097700 ) ; +#27940 = ORIENTED_EDGE ( 'NONE', *, *, #60510, .T. ) ; +#27941 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448300, 85.79999999999998300, -28.20555803802997700 ) ) ; +#27942 = ADVANCED_FACE ( 'NONE', ( #21036 ), #2494, .F. ) ; +#27943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27944 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 90.16749699759768100, -28.20555803802997700 ) ) ; +#27945 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 36.83333333333335000, 9.794441961969999600 ) ) ; +#27946 = CIRCLE ( 'NONE', #80164, 10.00000000000009400 ) ; +#27947 = AXIS2_PLACEMENT_3D ( 'NONE', #48526, #30109, #73594 ) ; +#27948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27949 = FACE_OUTER_BOUND ( 'NONE', #44046, .T. ) ; +#27950 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002100, 29.03085164125335300, -28.45573375118225800 ) ) ; +#27951 = ORIENTED_EDGE ( 'NONE', *, *, #5933, .T. ) ; +#27952 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615328200, 60.80000000000004000, -28.55171188418384500 ) ) ; +#27953 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#27954 = ORIENTED_EDGE ( 'NONE', *, *, #46394, .T. ) ; +#27955 = CARTESIAN_POINT ( 'NONE', ( -11.72090442826406700, 51.50050415885244300, -28.63287458792239800 ) ) ; +#27956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#27957 = EDGE_LOOP ( 'NONE', ( #55546, #61579, #70805 ) ) ; +#27958 = AXIS2_PLACEMENT_3D ( 'NONE', #58084, #20837, #64387 ) ; +#27959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27960 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#27961 = FACE_OUTER_BOUND ( 'NONE', #42895, .T. ) ; +#27962 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27963 = ORIENTED_EDGE ( 'NONE', *, *, #15346, .T. ) ; +#27964 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 10.00000000000000000, -28.70555803803001300 ) ) ; +#27965 = EDGE_CURVE ( 'NONE', #20935, #70927, #13020, .T. ) ; +#27966 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, -0.8333333333333119400, -9.205558038030003900 ) ) ; +#27967 = EDGE_LOOP ( 'NONE', ( #35084, #46374, #35122 ) ) ; +#27968 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 21.18315603019279400, -28.70555803802998100 ) ) ; +#27969 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 82.18315603019263400, -28.70555803803024400 ) ) ; +#27970 = ORIENTED_EDGE ( 'NONE', *, *, #54737, .T. ) ; +#27971 = ORIENTED_EDGE ( 'NONE', *, *, #18372, .T. ) ; +#27972 = ORIENTED_EDGE ( 'NONE', *, *, #31598, .T. ) ; +#27973 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#27974 = CIRCLE ( 'NONE', #51540, 10.00000000000009200 ) ; +#27975 = CARTESIAN_POINT ( 'NONE', ( -9.198586935028780300, 94.72249899919931700, -28.20555803802997700 ) ) ; +#27977 = ORIENTED_EDGE ( 'NONE', *, *, #38514, .T. ) ; +#27976 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338532300, 38.99322649091134700, -28.30799595738869800 ) ) ; +#27978 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#27979 = ORIENTED_EDGE ( 'NONE', *, *, #5913, .T. ) ; +#27980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27981 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 85.79999999999985500, -28.70525300642875200 ) ) ; +#27982 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 31.12753447840886900, -28.38801640354855500 ) ) ; +#27983 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18423, #74205, #24684, #68185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052613453500E-007, 0.0003301033223275541800 ), + .UNSPECIFIED. ) ; +#27984 = FACE_OUTER_BOUND ( 'NONE', #62698, .T. ) ; +#27985 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 101.5999999999999900, -1.205558038030003500 ) ) ; +#27986 = ORIENTED_EDGE ( 'NONE', *, *, #45533, .T. ) ; +#27987 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27988 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.932503002402297600, -28.20555803802994200 ) ) ; +#27989 = EDGE_CURVE ( 'NONE', #33975, #48264, #54107, .T. ) ; +#27990 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#27992 = EDGE_CURVE ( 'NONE', #61281, #33477, #35638, .T. ) ; +#27991 = ORIENTED_EDGE ( 'NONE', *, *, #24326, .T. ) ; +#27993 = ORIENTED_EDGE ( 'NONE', *, *, #78610, .T. ) ; +#27994 = CONICAL_SURFACE ( 'NONE', #35514, 10.50000000000009900, 0.7853981633974518300 ) ; +#27995 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#27996 = CIRCLE ( 'NONE', #18857, 9.500000000000099500 ) ; +#27997 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#27998 = AXIS2_PLACEMENT_3D ( 'NONE', #28881, #16324, #72367 ) ; +#27999 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801553300, 70.69966441803863700, -28.70555803803030800 ) ) ; +#28000 = EDGE_CURVE ( 'NONE', #62561, #15543, #79334, .T. ) ; +#28001 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17950, #55194, #49185, #11974 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471652208440900E-007, 0.0002673661813022374400 ), + .UNSPECIFIED. ) ; +#28002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28003 = EDGE_CURVE ( 'NONE', #76771, #67687, #64901, .T. ) ; +#28004 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571423100, 77.92318720225442500, -28.70555803803047500 ) ) ; +#28005 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146666000, 28.30869142985030300, -28.37223374938519500 ) ) ; +#28006 = ORIENTED_EDGE ( 'NONE', *, *, #29684, .F. ) ; +#28007 = ADVANCED_FACE ( 'NONE', ( #56054 ), #17135, .F. ) ; +#28008 = EDGE_CURVE ( 'NONE', #57731, #12914, #33668, .T. ) ; +#28009 = AXIS2_PLACEMENT_3D ( 'NONE', #21599, #46554, #59100 ) ; +#28010 = FACE_OUTER_BOUND ( 'NONE', #25109, .T. ) ; +#28012 = ORIENTED_EDGE ( 'NONE', *, *, #37475, .F. ) ; +#28011 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#28013 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#28014 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 8.500000000000007100, 6.847000845227641200 ) ) ; +#28015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59839, #78605, #16584, #60104 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904961090300E-007, 0.0005865296644889259300 ), + .UNSPECIFIED. ) ; +#28016 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122134800, 50.07332680091206400, -28.37233769390155300 ) ) ; +#28017 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803803001300 ) ) ; +#28018 = ADVANCED_FACE ( 'NONE', ( #43402 ), #48225, .F. ) ; +#28019 = FACE_OUTER_BOUND ( 'NONE', #79059, .T. ) ; +#28020 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 42.83333333333333600, -2.545304000185615800 ) ) ; +#28021 = AXIS2_PLACEMENT_3D ( 'NONE', #74045, #5754, #23737 ) ; +#28022 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#28023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28024 = ORIENTED_EDGE ( 'NONE', *, *, #12405, .F. ) ; +#28025 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69976, #63764, #20229, #76243 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345477700, 0.0008131256040087718600 ), + .UNSPECIFIED. ) ; +#28026 = EDGE_CURVE ( 'NONE', #44262, #30914, #50352, .T. ) ; +#28027 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 7.833333333333348100, -3.349151577478984600 ) ) ; +#28028 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180781400, 69.94924284854683100, -28.20555803803030800 ) ) ; +#28029 = CARTESIAN_POINT ( 'NONE', ( -1.283695372222837200E-013, 15.94142842854310700, -28.20555803802992800 ) ) ; +#28030 = CIRCLE ( 'NONE', #68247, 10.00000000000009200 ) ; +#28031 = EDGE_LOOP ( 'NONE', ( #37036, #13417, #19754 ) ) ; +#28032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28033 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 45.16666666666667100, -4.152999154772358800 ) ) ; +#28034 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725669300, 36.93535825203924400, -28.53896444442198900 ) ) ; +#28035 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#28036 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28037 = EDGE_LOOP ( 'NONE', ( #59514, #64091, #62648, #44970 ) ) ; +#28038 = AXIS2_PLACEMENT_3D ( 'NONE', #5977, #12236, #43215 ) ; +#28039 = EDGE_CURVE ( 'NONE', #73072, #33376, #64837, .T. ) ; +#28040 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28042 = ADVANCED_FACE ( 'NONE', ( #37533 ), #79415, .T. ) ; +#28043 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28044 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477739000, 39.38589569235279700, -28.27354076558354400 ) ) ; +#28045 = CIRCLE ( 'NONE', #46288, 10.00000000000009400 ) ; +#28046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28047 = CIRCLE ( 'NONE', #50589, 10.00000000000009200 ) ; +#28048 = ORIENTED_EDGE ( 'NONE', *, *, #68403, .T. ) ; +#28049 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ; +#28050 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433500, 77.93535825203925100, -28.53896444442201400 ) ) ; +#28051 = ORIENTED_EDGE ( 'NONE', *, *, #62140, .F. ) ; +#28052 = ORIENTED_EDGE ( 'NONE', *, *, #40387, .T. ) ; +#28053 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187873400, 38.99813478817167600, -28.24089224568488300 ) ) ; +#28054 = AXIS2_PLACEMENT_3D ( 'NONE', #79357, #79622, #42326 ) ; +#28055 = CARTESIAN_POINT ( 'NONE', ( 15.02628644574478900, 85.88243067206822400, -28.70555803803001600 ) ) ; +#28056 = VERTEX_POINT ( 'NONE', #73482 ) ; +#28057 = CARTESIAN_POINT ( 'NONE', ( -3.427738916792670400, 8.799999999999828400, -28.63329695482268300 ) ) ; +#28058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28059 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040400, 61.43250300240213600, -28.20555803803014400 ) ) ; +#28060 = ORIENTED_EDGE ( 'NONE', *, *, #53327, .F. ) ; +#28061 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71346, #15323, #77595, #40317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#28062 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136757500, 89.92958814301766800, -28.27321389036166400 ) ) ; +#28063 = CONICAL_SURFACE ( 'NONE', #1124, 10.50000000000009900, 0.7853981633974518300 ) ; +#28064 = AXIS2_PLACEMENT_3D ( 'NONE', #6270, #62054, #12539 ) ; +#28065 = EDGE_LOOP ( 'NONE', ( #42008, #5780, #63751, #35082 ) ) ; +#28066 = VERTEX_POINT ( 'NONE', #36220 ) ; +#28067 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 48.66666666666667900, 5.722645192245505700 ) ) ; +#28068 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 53.65857157145681800, -28.20555803803047800 ) ) ; +#28069 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28070 = ORIENTED_EDGE ( 'NONE', *, *, #1191, .F. ) ; +#28071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28072 = CONICAL_SURFACE ( 'NONE', #29285, 10.50000000000009600, 0.7853981633974500600 ) ; +#28073 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28075 = AXIS2_PLACEMENT_3D ( 'NONE', #62076, #68305, #18541 ) ; +#28076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28077 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#28078 = PLANE ( 'NONE', #73317 ) ; +#28079 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28080 = ORIENTED_EDGE ( 'NONE', *, *, #38652, .F. ) ; +#28081 = CARTESIAN_POINT ( 'NONE', ( -10.63950292779718000, 41.43250300240230600, -28.25438406275899800 ) ) ; +#28082 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 50.33333333333334300, -5.205558038030008400 ) ) ; +#28083 = CIRCLE ( 'NONE', #31256, 10.50000000000009200 ) ; +#28084 = ORIENTED_EDGE ( 'NONE', *, *, #73716, .F. ) ; +#28085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28086 = EDGE_LOOP ( 'NONE', ( #12358, #67985, #37310 ) ) ; +#28087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28088 = ORIENTED_EDGE ( 'NONE', *, *, #63345, .F. ) ; +#28089 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 13.83333333333335500, -9.205558038030003900 ) ) ; +#28090 = CARTESIAN_POINT ( 'NONE', ( 20.11258155966288500, 94.15628807560060000, -27.29985240273542100 ) ) ; +#28091 = ADVANCED_FACE ( 'NONE', ( #15170 ), #46264, .F. ) ; +#28092 = FACE_OUTER_BOUND ( 'NONE', #29413, .T. ) ; +#28093 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#28094 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28096 = EDGE_CURVE ( 'NONE', #71618, #23276, #35936, .T. ) ; +#28095 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30455, #73960, #18186, #61723 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.237823150468372500E-005, 0.0003590896259719824100 ), + .UNSPECIFIED. ) ; +#28097 = ORIENTED_EDGE ( 'NONE', *, *, #41898, .T. ) ; +#28098 = ORIENTED_EDGE ( 'NONE', *, *, #5933, .F. ) ; +#28099 = ORIENTED_EDGE ( 'NONE', *, *, #26058, .T. ) ; +#28100 = ADVANCED_FACE ( 'NONE', ( #62875 ), #13242, .F. ) ; +#28101 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 17.16666666666667500, 3.794441961969996900 ) ) ; +#28102 = CARTESIAN_POINT ( 'NONE', ( 2.279102202939263100, 71.50050326225955600, -28.63287226700125000 ) ) ; +#28103 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550015200, 69.83662311806122600, -28.37223523914948900 ) ) ; +#28104 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#28105 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#28106 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 57.33333333333335000, 5.722645192245503900 ) ) ; +#28107 = CIRCLE ( 'NONE', #58212, 10.50000000000009600 ) ; +#28108 = EDGE_CURVE ( 'NONE', #40425, #13573, #21506, .T. ) ; +#28109 = FACE_OUTER_BOUND ( 'NONE', #40907, .T. ) ; +#28110 = EDGE_LOOP ( 'NONE', ( #17994, #5867, #70692, #25781 ) ) ; +#28111 = AXIS2_PLACEMENT_3D ( 'NONE', #64986, #27708, #71198 ) ; +#28112 = CARTESIAN_POINT ( 'NONE', ( 1.621966450038314600E-013, 87.22261628933252100, -28.70555803802997700 ) ) ; +#28113 = VERTEX_POINT ( 'NONE', #79735 ) ; +#28114 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28115 = EDGE_LOOP ( 'NONE', ( #8563, #46327, #29177 ) ) ; +#28116 = ADVANCED_FACE ( 'NONE', ( #66772 ), #60931, .T. ) ; +#28117 = CIRCLE ( 'NONE', #64825, 10.50000000000009600 ) ; +#28118 = ORIENTED_EDGE ( 'NONE', *, *, #54714, .T. ) ; +#28119 = VERTEX_POINT ( 'NONE', #37842 ) ; +#28120 = ORIENTED_EDGE ( 'NONE', *, *, #66241, .F. ) ; +#28121 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 90.51916201875667400, -28.45106778992437700 ) ) ; +#28122 = ORIENTED_EDGE ( 'NONE', *, *, #63021, .T. ) ; +#28123 = CARTESIAN_POINT ( 'NONE', ( 16.56790757632378000, 12.87072804553889500, -28.58363361004983000 ) ) ; +#28124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28125 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28126 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686400, 31.17701665379241000, -28.20555803802996000 ) ) ; +#28127 = ORIENTED_EDGE ( 'NONE', *, *, #72419, .F. ) ; +#28128 = AXIS2_PLACEMENT_3D ( 'NONE', #68395, #55872, #37353 ) ; +#28129 = EDGE_CURVE ( 'NONE', #9523, #10158, #7007, .T. ) ; +#28130 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66097, #10057, #72363, #35107 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459159343054100E-007, 0.0007679767755145123800 ), + .UNSPECIFIED. ) ; +#28131 = EDGE_CURVE ( 'NONE', #26957, #65165, #73345, .T. ) ; +#28132 = ADVANCED_FACE ( 'NONE', ( #50175 ), #27842, .T. ) ; +#28133 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654370600, 90.07527064970102500, -28.39317435246150400 ) ) ; +#28134 = AXIS2_PLACEMENT_3D ( 'NONE', #49406, #80459, #61977 ) ; +#28135 = EDGE_LOOP ( 'NONE', ( #20997, #25789, #25046 ) ) ; +#28136 = CARTESIAN_POINT ( 'NONE', ( -3.550756771981804900, 8.958478180218985900, -28.65366437610099800 ) ) ; +#28137 = CIRCLE ( 'NONE', #78242, 9.500000000000097700 ) ; +#28138 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 55.80000000000001800, -28.70555803802997700 ) ) ; +#28139 = VERTEX_POINT ( 'NONE', #849 ) ; +#28140 = AXIS2_PLACEMENT_3D ( 'NONE', #14366, #64166, #51582 ) ; +#28141 = ORIENTED_EDGE ( 'NONE', *, *, #78645, .T. ) ; +#28142 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28143 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 49.66749699759768100, -28.20555803802996700 ) ) ; +#28144 = VERTEX_POINT ( 'NONE', #7104 ) ; +#28145 = VERTEX_POINT ( 'NONE', #50598 ) ; +#28146 = ORIENTED_EDGE ( 'NONE', *, *, #42837, .F. ) ; +#28147 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28148 = CARTESIAN_POINT ( 'NONE', ( -16.88108227420125100, 81.10238820582982600, -28.32098513914462100 ) ) ; +#28149 = AXIS2_PLACEMENT_3D ( 'NONE', #28547, #78281, #65774 ) ; +#28150 = CARTESIAN_POINT ( 'NONE', ( -17.24374441227740100, 70.61266709210549700, -28.45058834003056300 ) ) ; +#28151 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28152 = FACE_OUTER_BOUND ( 'NONE', #68617, .T. ) ; +#28153 = EDGE_CURVE ( 'NONE', #62959, #4991, #58871, .T. ) ; +#28154 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28155 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28156 = CARTESIAN_POINT ( 'NONE', ( 3.073491842515444700, 70.22161678501170500, -28.29547179040452000 ) ) ; +#28157 = AXIS2_PLACEMENT_3D ( 'NONE', #23602, #67102, #29886 ) ; +#28158 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567156700, 41.24660241562189400, -28.20555803802996700 ) ) ; +#28159 = AXIS2_PLACEMENT_3D ( 'NONE', #6107, #49568, #12375 ) ; +#28160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28161 = ORIENTED_EDGE ( 'NONE', *, *, #7830, .T. ) ; +#28162 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20973, #58208, #27232, #70713 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001511925583809228700, 0.002290256320676268600 ), + .UNSPECIFIED. ) ; +#28163 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489603300, 49.65930907398613000, -28.35186440610855000 ) ) ; +#28164 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28165 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345200100, 80.27440177985803900, -28.29986836858028500 ) ) ; +#28166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28168 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#28169 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28170 = CIRCLE ( 'NONE', #74970, 10.00000000000009600 ) ; +#28171 = VERTEX_POINT ( 'NONE', #32143 ) ; +#28172 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875013300, 75.13282980700522300, -28.53914313452735400 ) ) ; +#28173 = AXIS2_PLACEMENT_3D ( 'NONE', #80015, #42715, #5482 ) ; +#28174 = ORIENTED_EDGE ( 'NONE', *, *, #10212, .T. ) ; +#28175 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 70.34267608797603100, -28.20555803802997700 ) ) ; +#28176 = ORIENTED_EDGE ( 'NONE', *, *, #48044, .T. ) ; +#28177 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28178 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 79.94924284854739900, -28.20555803802997700 ) ) ; +#28179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28180 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180780500, 59.94924284854683800, -28.20555803803030800 ) ) ; +#28181 = AXIS2_PLACEMENT_3D ( 'NONE', #26594, #14325, #8042 ) ; +#28182 = CONICAL_SURFACE ( 'NONE', #60892, 10.00000000000009400, 0.7853981633974447300 ) ; +#28183 = CIRCLE ( 'NONE', #46790, 10.00000000000009200 ) ; +#28184 = VERTEX_POINT ( 'NONE', #19637 ) ; +#28185 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51194, #44942, #14260, #57772 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025232400, 0.0006251342085520081900 ), + .UNSPECIFIED. ) ; +#28186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28187 = ORIENTED_EDGE ( 'NONE', *, *, #12856, .T. ) ; +#28188 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 63.33333333333333600, 2.794441961969998300 ) ) ; +#28189 = AXIS2_PLACEMENT_3D ( 'NONE', #65837, #72107, #22300 ) ; +#28190 = VERTEX_POINT ( 'NONE', #44327 ) ; +#28191 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260019500, 51.39965687931164200, -28.70555803803001600 ) ) ; +#28192 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116569700, 18.20564881207769400, -28.41114655922286400 ) ) ; +#28193 = EDGE_CURVE ( 'NONE', #31088, #40820, #44358, .T. ) ; +#28194 = FACE_OUTER_BOUND ( 'NONE', #25393, .T. ) ; +#28195 = ORIENTED_EDGE ( 'NONE', *, *, #59322, .T. ) ; +#28196 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034432000, 41.67701665379240000, -28.20555803802997400 ) ) ; +#28197 = VECTOR ( 'NONE', #15838, 1000.000000000000000 ) ; +#28198 = ORIENTED_EDGE ( 'NONE', *, *, #19159, .F. ) ; +#28199 = EDGE_LOOP ( 'NONE', ( #34118, #67827, #53997 ) ) ; +#28200 = AXIS2_PLACEMENT_3D ( 'NONE', #10691, #54187, #16950 ) ; +#28201 = ORIENTED_EDGE ( 'NONE', *, *, #73473, .T. ) ; +#28202 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28203 = CONICAL_SURFACE ( 'NONE', #56933, 10.00000000000009400, 0.7853981633974447300 ) ; +#28204 = ORIENTED_EDGE ( 'NONE', *, *, #43864, .F. ) ; +#28205 = ORIENTED_EDGE ( 'NONE', *, *, #46123, .T. ) ; +#28206 = ORIENTED_EDGE ( 'NONE', *, *, #31991, .T. ) ; +#28207 = VERTEX_POINT ( 'NONE', #57166 ) ; +#28208 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 53.67681279774500100, -28.70555803802997700 ) ) ; +#28209 = ORIENTED_EDGE ( 'NONE', *, *, #28839, .F. ) ; +#28210 = ADVANCED_FACE ( 'NONE', ( #44305 ), #75492, .T. ) ; +#28211 = EDGE_LOOP ( 'NONE', ( #25014, #4444, #56823, #23693, #66268 ) ) ; +#28212 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28214 = CARTESIAN_POINT ( 'NONE', ( 17.07186135248057100, 7.514967368248509400, -28.35333414941146700 ) ) ; +#28215 = CARTESIAN_POINT ( 'NONE', ( -2.254657264815542300, 10.00380841767819400, -28.64142799534449300 ) ) ; +#28216 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 34.66666666666667900, -10.73183747965883100 ) ) ; +#28217 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 36.70389005397397100, -28.37519436813179000 ) ) ; +#28218 = FACE_OUTER_BOUND ( 'NONE', #18226, .T. ) ; +#28220 = ORIENTED_EDGE ( 'NONE', *, *, #51126, .T. ) ; +#28219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28221 = CARTESIAN_POINT ( 'NONE', ( 4.322472515540394700, 9.342828874293852300, -28.51468825946494300 ) ) ; +#28222 = EDGE_CURVE ( 'NONE', #62529, #61281, #29989, .T. ) ; +#28223 = ORIENTED_EDGE ( 'NONE', *, *, #44228, .T. ) ; +#28224 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736705500, 35.04999999999999700, -28.70555803802995200 ) ) ; +#28225 = ORIENTED_EDGE ( 'NONE', *, *, #75586, .T. ) ; +#28226 = ADVANCED_FACE ( 'NONE', ( #77451 ), #44864, .T. ) ; +#28227 = ORIENTED_EDGE ( 'NONE', *, *, #58551, .T. ) ; +#28228 = EDGE_CURVE ( 'NONE', #13142, #71109, #29810, .T. ) ; +#28229 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#28230 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28231 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#28232 = ADVANCED_FACE ( 'NONE', ( #19062 ), #9290, .T. ) ; +#28233 = CIRCLE ( 'NONE', #69261, 9.500000000000099500 ) ; +#28234 = EDGE_LOOP ( 'NONE', ( #16694, #22698, #48462 ) ) ; +#28235 = EDGE_CURVE ( 'NONE', #71934, #35143, #25878, .T. ) ; +#28236 = ORIENTED_EDGE ( 'NONE', *, *, #56168, .F. ) ; +#28237 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48741, #30573, #5798, #49275 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782095500, 0.0004366687057304345700 ), + .UNSPECIFIED. ) ; +#28238 = ADVANCED_FACE ( 'NONE', ( #31731 ), #40451, .T. ) ; +#28239 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430900, 20.67701665379241000, -28.20555803802994500 ) ) ; +#28240 = EDGE_CURVE ( 'NONE', #42969, #31640, #57016, .T. ) ; +#28241 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28242 = AXIS2_PLACEMENT_3D ( 'NONE', #78101, #40842, #3562 ) ; +#28243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28244 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -2.999999999999988900, 6.794441961969995200 ) ) ; +#28245 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#28246 = CONICAL_SURFACE ( 'NONE', #75439, 10.50000000000009600, 0.7853981633974500600 ) ; +#28247 = ORIENTED_EDGE ( 'NONE', *, *, #33299, .T. ) ; +#28248 = ORIENTED_EDGE ( 'NONE', *, *, #45542, .T. ) ; +#28249 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 80.07141756547892400, -28.70555803802997700 ) ) ; +#28250 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 72.18315603019263400, -28.70555803803024400 ) ) ; +#28251 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#28252 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174770700, 61.43945992495534400, -28.34042301926882200 ) ) ; +#28253 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851401500, 36.00238095238081800, -28.70555803802995200 ) ) ; +#28254 = AXIS2_PLACEMENT_3D ( 'NONE', #48717, #11507, #54992 ) ; +#28255 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286475800, 78.93300507136164900, -28.67024809316606900 ) ) ; +#28256 = EDGE_CURVE ( 'NONE', #21102, #9002, #15498, .T. ) ; +#28257 = EDGE_CURVE ( 'NONE', #63443, #11263, #73563, .T. ) ; +#28258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28259 = EDGE_CURVE ( 'NONE', #19874, #53856, #1012, .T. ) ; +#28260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28263 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 20.43250300240229200, -28.20555803802995200 ) ) ; +#28264 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#28265 = CIRCLE ( 'NONE', #13939, 10.50000000000009600 ) ; +#28266 = CONICAL_SURFACE ( 'NONE', #5604, 10.50000000000009600, 0.7853981633974482800 ) ; +#28267 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28268 = VERTEX_POINT ( 'NONE', #39174 ) ; +#28269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28271 = EDGE_CURVE ( 'NONE', #5879, #65169, #42387, .T. ) ; +#28272 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 46.96443389862717800, -28.54207364681941100 ) ) ; +#28273 = AXIS2_PLACEMENT_3D ( 'NONE', #63827, #26575, #70046 ) ; +#28274 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#28275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28277 = FACE_OUTER_BOUND ( 'NONE', #35134, .T. ) ; +#28278 = VERTEX_POINT ( 'NONE', #27247 ) ; +#28279 = ORIENTED_EDGE ( 'NONE', *, *, #48185, .F. ) ; +#28280 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 41.86172549728279800, -28.47230003642276900 ) ) ; +#28281 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 87.92318720225497900, -28.70555803802997700 ) ) ; +#28282 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 39.15930907398619400, -28.35186440610857500 ) ) ; +#28283 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 6.333333333333346400, -10.73183747965883100 ) ) ; +#28284 = CIRCLE ( 'NONE', #5821, 10.00000000000009400 ) ; +#28285 = ORIENTED_EDGE ( 'NONE', *, *, #8279, .T. ) ; +#28286 = VERTEX_POINT ( 'NONE', #45402 ) ; +#28287 = ORIENTED_EDGE ( 'NONE', *, *, #77280, .T. ) ; +#28288 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21262, #2712, #21530, #65060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019568724121700E-007, 0.0004053774948100822900 ), + .UNSPECIFIED. ) ; +#28289 = ORIENTED_EDGE ( 'NONE', *, *, #2178, .F. ) ; +#28291 = ORIENTED_EDGE ( 'NONE', *, *, #42114, .T. ) ; +#28290 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#28292 = ORIENTED_EDGE ( 'NONE', *, *, #58822, .F. ) ; +#28293 = EDGE_LOOP ( 'NONE', ( #58412, #60021, #27256, #34329, #25752 ) ) ; +#28294 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 40.66666666666667900, 1.294441961969997200 ) ) ; +#28295 = AXIS2_PLACEMENT_3D ( 'NONE', #13490, #56993, #19723 ) ; +#28296 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567169600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#28297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28298 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 5.666666666666681200, 2.794441961969992100 ) ) ; +#28299 = AXIS2_PLACEMENT_3D ( 'NONE', #18735, #62259, #24993 ) ; +#28300 = VERTEX_POINT ( 'NONE', #58224 ) ; +#28301 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537342700, 71.39409401757610900, -28.39369363572373600 ) ) ; +#28302 = FACE_OUTER_BOUND ( 'NONE', #41294, .T. ) ; +#28303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28304 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ; +#28305 = CARTESIAN_POINT ( 'NONE', ( 5.642965927353937900, 44.44999999999999600, 4.863095268617461100 ) ) ; +#28306 = ORIENTED_EDGE ( 'NONE', *, *, #35031, .F. ) ; +#28307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28308 = EDGE_CURVE ( 'NONE', #63652, #17583, #67353, .T. ) ; +#28309 = ORIENTED_EDGE ( 'NONE', *, *, #33876, .T. ) ; +#28310 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 43.00000000000001400, -1.205558038030002800 ) ) ; +#28311 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 90.37705528805135200, -28.20555803802997700 ) ) ; +#28312 = ORIENTED_EDGE ( 'NONE', *, *, #25113, .F. ) ; +#28313 = VERTEX_POINT ( 'NONE', #21257 ) ; +#28314 = AXIS2_PLACEMENT_3D ( 'NONE', #38758, #1524, #45005 ) ; +#28315 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492640600, 38.57379779496234600, -28.70555803802995200 ) ) ; +#28316 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846310500, 80.79999999999998300, -28.55171188418376400 ) ) ; +#28317 = CIRCLE ( 'NONE', #72828, 9.500000000000099500 ) ; +#28318 = AXIS2_PLACEMENT_3D ( 'NONE', #22124, #71910, #3335 ) ; +#28319 = ORIENTED_EDGE ( 'NONE', *, *, #21338, .F. ) ; +#28320 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#28321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28322 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28323 = CARTESIAN_POINT ( 'NONE', ( 2.233681164915745300, 94.21465145973552100, -28.37247945210592800 ) ) ; +#28324 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28326 = AXIS2_PLACEMENT_3D ( 'NONE', #78072, #47027, #34563 ) ; +#28327 = PLANE ( 'NONE', #41544 ) ; +#28328 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28329 = FACE_OUTER_BOUND ( 'NONE', #38840, .T. ) ; +#28330 = VERTEX_POINT ( 'NONE', #52201 ) ; +#28331 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28332 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#28333 = EDGE_LOOP ( 'NONE', ( #37975, #46877, #46419, #9988 ) ) ; +#28334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28335 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28336 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.66749699759768800, -28.20555803802994200 ) ) ; +#28337 = ADVANCED_FACE ( 'NONE', ( #11282 ), #38466, .F. ) ; +#28338 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28340 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47324, #10112, #53624, #16375 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.024595850374353600E-017, 0.001179148174663200200 ), + .UNSPECIFIED. ) ; +#28341 = ADVANCED_FACE ( 'NONE', ( #551 ), #5423, .F. ) ; +#28342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28344 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28345 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28346 = EDGE_CURVE ( 'NONE', #31241, #77128, #21968, .T. ) ; +#28347 = FACE_OUTER_BOUND ( 'NONE', #3083, .T. ) ; +#28348 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 46.50000000000001400, -7.061964498581022400 ) ) ; +#28349 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#28350 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7893, #45122, #20430, #63967 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283330972600, 0.0007287255810272595600 ), + .UNSPECIFIED. ) ; +#28351 = EDGE_CURVE ( 'NONE', #71006, #45679, #52873, .T. ) ; +#28352 = ORIENTED_EDGE ( 'NONE', *, *, #60095, .F. ) ; +#28353 = ORIENTED_EDGE ( 'NONE', *, *, #56642, .F. ) ; +#28354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28355 = EDGE_LOOP ( 'NONE', ( #10943, #169, #19332, #67406 ) ) ; +#28356 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17318, #23586, #42311, #5066 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696290844200E-007, 0.0008724363063898948800 ), + .UNSPECIFIED. ) ; +#28357 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#28358 = CARTESIAN_POINT ( 'NONE', ( 4.512589988548837600, 90.12140959736004200, -28.55996453402207900 ) ) ; +#28359 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145294000, 51.86801718796587600, -28.34169759783691900 ) ) ; +#28360 = EDGE_CURVE ( 'NONE', #42171, #55730, #23936, .T. ) ; +#28361 = ADVANCED_FACE ( 'NONE', ( #69630 ), #3444, .T. ) ; +#28362 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67507, #61287, #55252, #18009 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0006896863566005952000 ), + .UNSPECIFIED. ) ; +#28363 = CIRCLE ( 'NONE', #5449, 10.00000000000009200 ) ; +#28364 = ORIENTED_EDGE ( 'NONE', *, *, #63840, .F. ) ; +#28365 = ORIENTED_EDGE ( 'NONE', *, *, #60497, .F. ) ; +#28366 = EDGE_CURVE ( 'NONE', #66852, #59550, #36541, .T. ) ; +#28367 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006900, 52.50000000000001400, 4.650848422521014500 ) ) ; +#28368 = EDGE_CURVE ( 'NONE', #32406, #69375, #38389, .T. ) ; +#28369 = ORIENTED_EDGE ( 'NONE', *, *, #17253, .F. ) ; +#28370 = CONICAL_SURFACE ( 'NONE', #57884, 10.00000000000009200, 0.7853981633974447300 ) ; +#28371 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#28372 = ORIENTED_EDGE ( 'NONE', *, *, #47523, .T. ) ; +#28373 = ORIENTED_EDGE ( 'NONE', *, *, #60527, .T. ) ; +#28374 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28375 = ORIENTED_EDGE ( 'NONE', *, *, #44935, .T. ) ; +#28376 = ORIENTED_EDGE ( 'NONE', *, *, #43994, .F. ) ; +#28377 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 11.66666666666668600, 5.722645192245505700 ) ) ; +#28378 = CARTESIAN_POINT ( 'NONE', ( 22.73748317396494700, 95.46873905926487700, -25.04051219793355900 ) ) ; +#28379 = AXIS2_PLACEMENT_3D ( 'NONE', #10431, #53926, #16683 ) ; +#28380 = EDGE_CURVE ( 'NONE', #69047, #37106, #53082, .T. ) ; +#28381 = EDGE_CURVE ( 'NONE', #42864, #46914, #23986, .T. ) ; +#28382 = EDGE_CURVE ( 'NONE', #31068, #64808, #9485, .T. ) ; +#28383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28384 = ORIENTED_EDGE ( 'NONE', *, *, #11546, .F. ) ; +#28385 = CIRCLE ( 'NONE', #3037, 10.00000000000009600 ) ; +#28386 = AXIS2_PLACEMENT_3D ( 'NONE', #69757, #20265, #44966 ) ; +#28387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28388 = ORIENTED_EDGE ( 'NONE', *, *, #57996, .F. ) ; +#28389 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28390 = ORIENTED_EDGE ( 'NONE', *, *, #49823, .T. ) ; +#28391 = ORIENTED_EDGE ( 'NONE', *, *, #50075, .T. ) ; +#28392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28393 = ORIENTED_EDGE ( 'NONE', *, *, #51718, .F. ) ; +#28394 = CIRCLE ( 'NONE', #828, 9.499999999999964500 ) ; +#28395 = AXIS2_PLACEMENT_3D ( 'NONE', #54147, #23167, #66683 ) ; +#28396 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 15.00000000000001400, -6.205558038030003100 ) ) ; +#28397 = AXIS2_PLACEMENT_3D ( 'NONE', #69783, #13790, #26308 ) ; +#28398 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#28399 = EDGE_LOOP ( 'NONE', ( #32140, #19656, #47364, #16943 ) ) ; +#28400 = AXIS2_PLACEMENT_3D ( 'NONE', #31826, #778, #69074 ) ; +#28401 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37143, #30922, #5899, #80682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108228300, 0.0006040461757766363100 ), + .UNSPECIFIED. ) ; +#28402 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567600, 63.66464174796074400, -28.53896444442200000 ) ) ; +#28403 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 55.16666666666665700, -9.205558038030003900 ) ) ; +#28404 = ORIENTED_EDGE ( 'NONE', *, *, #62738, .F. ) ; +#28405 = CIRCLE ( 'NONE', #24825, 10.50000000000009200 ) ; +#28406 = ORIENTED_EDGE ( 'NONE', *, *, #13665, .T. ) ; +#28407 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28408 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274710100, 24.55000000000000100, -28.20555803802994200 ) ) ; +#28409 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#28410 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 73.65857157145681800, -28.20555803803047800 ) ) ; +#28411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28412 = AXIS2_PLACEMENT_3D ( 'NONE', #66719, #16949, #17213 ) ; +#28413 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142000, 30.96868088498121800, -28.51286550264512000 ) ) ; +#28414 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28415 = ADVANCED_FACE ( 'NONE', ( #20031 ), #18061, .T. ) ; +#28416 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 43.42856308690586100, -28.36981695106784000 ) ) ; +#28417 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28418 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567155000, 30.74660241562189700, -28.20555803802995200 ) ) ; +#28419 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849344600, 49.77966528189954000, -28.30868034705250100 ) ) ; +#28420 = EDGE_CURVE ( 'NONE', #1613, #15453, #75809, .T. ) ; +#28421 = ORIENTED_EDGE ( 'NONE', *, *, #78982, .T. ) ; +#28422 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150683400, 20.32033471810044400, -28.30868034705250100 ) ) ; +#28423 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 80.79999999999998300, -28.55171188418376700 ) ) ; +#28424 = ORIENTED_EDGE ( 'NONE', *, *, #35719, .T. ) ; +#28425 = AXIS2_PLACEMENT_3D ( 'NONE', #4084, #29165, #53858 ) ; +#28426 = ORIENTED_EDGE ( 'NONE', *, *, #12737, .T. ) ; +#28427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28428 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506424800, 10.01912043132478500, -28.30223257055570900 ) ) ; +#28429 = ADVANCED_FACE ( 'NONE', ( #34621 ), #78354, .T. ) ; +#28430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28431 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#28432 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454043900, 72.51973550835660400, -28.70555803802997400 ) ) ; +#28433 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#28434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28435 = CONICAL_SURFACE ( 'NONE', #49136, 10.00000000000009200, 0.7853981633974447300 ) ; +#28436 = ORIENTED_EDGE ( 'NONE', *, *, #23575, .T. ) ; +#28437 = CARTESIAN_POINT ( 'NONE', ( -24.96274535464302600, 97.22923444108167200, -19.59617824989485900 ) ) ; +#28438 = CARTESIAN_POINT ( 'NONE', ( -17.23701223182904500, 40.81227583396992000, -28.45214906810760200 ) ) ; +#28439 = AXIS2_PLACEMENT_3D ( 'NONE', #73323, #36052, #79572 ) ; +#28440 = ORIENTED_EDGE ( 'NONE', *, *, #69287, .F. ) ; +#28441 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450500, 85.47903320442293300, -28.36604143581859100 ) ) ; +#28442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28443 = FACE_OUTER_BOUND ( 'NONE', #54813, .T. ) ; +#28444 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 60.37705528805136600, -28.20555803802997700 ) ) ; +#28445 = ORIENTED_EDGE ( 'NONE', *, *, #48301, .T. ) ; +#28447 = ORIENTED_EDGE ( 'NONE', *, *, #53272, .F. ) ; +#28446 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748479900, 80.22161678501154800, -28.29547179040476500 ) ) ; +#28448 = ORIENTED_EDGE ( 'NONE', *, *, #6180, .T. ) ; +#28449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28450 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#28451 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274709400, 45.54999999999999700, -28.20555803802996700 ) ) ; +#28452 = AXIS2_PLACEMENT_3D ( 'NONE', #54156, #78951, #16919 ) ; +#28453 = FACE_OUTER_BOUND ( 'NONE', #48815, .T. ) ; +#28454 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#28455 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194903400, 54.83849307182673300, -28.68631150211663800 ) ) ; +#28456 = ADVANCED_FACE ( 'NONE', ( #67704 ), #49168, .T. ) ; +#28457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23026, #29061, #47740, #66538 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674908246100E-007, 0.0007987728781052872700 ), + .UNSPECIFIED. ) ; +#28458 = FACE_OUTER_BOUND ( 'NONE', #1810, .T. ) ; +#28459 = EDGE_CURVE ( 'NONE', #15453, #67964, #65773, .T. ) ; +#28460 = EDGE_LOOP ( 'NONE', ( #44099, #65532, #54403, #42690 ) ) ; +#28461 = EDGE_LOOP ( 'NONE', ( #17869, #37219, #59333, #14465 ) ) ; +#28462 = EDGE_LOOP ( 'NONE', ( #38359, #58144, #56990, #2140 ) ) ; +#28463 = ORIENTED_EDGE ( 'NONE', *, *, #68360, .F. ) ; +#28464 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#28465 = CIRCLE ( 'NONE', #41370, 9.500000000000097700 ) ; +#28466 = ORIENTED_EDGE ( 'NONE', *, *, #46785, .F. ) ; +#28467 = FACE_OUTER_BOUND ( 'NONE', #48557, .T. ) ; +#28468 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 61.16666666666665700, -3.349151577478988200 ) ) ; +#28469 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25805, #7260, #26073, #69557 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207931749000E-007, 0.0008724366121409656100 ), + .UNSPECIFIED. ) ; +#28470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28471 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 90.34267608797601700, -28.20555803803030800 ) ) ; +#28472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28473 = EDGE_CURVE ( 'NONE', #39079, #19455, #61400, .T. ) ; +#28474 = EDGE_CURVE ( 'NONE', #73303, #57598, #58949, .T. ) ; +#28475 = CIRCLE ( 'NONE', #68547, 10.00000000000009200 ) ; +#28476 = ORIENTED_EDGE ( 'NONE', *, *, #46510, .T. ) ; +#28478 = ORIENTED_EDGE ( 'NONE', *, *, #5816, .T. ) ; +#28477 = PLANE ( 'NONE', #43768 ) ; +#28479 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275502600, 55.33333333333335700, 2.794441961969998300 ) ) ; +#28480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67354, #42306, #79876, #42571 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553787898800E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#28481 = AXIS2_PLACEMENT_3D ( 'NONE', #51740, #14536, #58045 ) ; +#28482 = EDGE_CURVE ( 'NONE', #70673, #67715, #55041, .T. ) ; +#28483 = EDGE_CURVE ( 'NONE', #69885, #426, #46871, .T. ) ; +#28484 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432775300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#28485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12570, #6298, #43533, #18813 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560270300, 0.003631405919786782200 ), + .UNSPECIFIED. ) ; +#28486 = EDGE_CURVE ( 'NONE', #12763, #69501, #71609, .T. ) ; +#28487 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537517600, 60.20590598242372200, -28.39369363572360400 ) ) ; +#28488 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28489 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 80.34267608797600200, -28.20555803802997700 ) ) ; +#28490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28491 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 32.50000000000001400, 6.847000845227646500 ) ) ; +#28492 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28493 = EDGE_CURVE ( 'NONE', #40820, #40229, #51094, .T. ) ; +#28494 = AXIS2_PLACEMENT_3D ( 'NONE', #12774, #56248, #18988 ) ; +#28495 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#28496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28497 = VERTEX_POINT ( 'NONE', #4615 ) ; +#28498 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263300, 49.07379779496234600, -28.70555803802996700 ) ) ; +#28499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28500 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.34510448120794000, -28.37193179497694500 ) ) ; +#28501 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28502 = ORIENTED_EDGE ( 'NONE', *, *, #35232, .T. ) ; +#28503 = AXIS2_PLACEMENT_3D ( 'NONE', #45569, #8331, #51829 ) ; +#28504 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002500, 20.06914835874664500, -28.45573375118225100 ) ) ; +#28505 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #43931, #6693 ) ; +#28506 = ADVANCED_FACE ( 'NONE', ( #16112 ), #35639, .T. ) ; +#28507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28509 = FACE_OUTER_BOUND ( 'NONE', #14353, .T. ) ; +#28510 = VERTEX_POINT ( 'NONE', #10883 ) ; +#28511 = FACE_OUTER_BOUND ( 'NONE', #32011, .T. ) ; +#28512 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 61.65075715145309900, -28.20555803802997700 ) ) ; +#28513 = ORIENTED_EDGE ( 'NONE', *, *, #41307, .T. ) ; +#28514 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 67.00000000000000000, -6.205558038030003100 ) ) ; +#28515 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#28516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28518 = VERTEX_POINT ( 'NONE', #42122 ) ; +#28519 = CONICAL_SURFACE ( 'NONE', #62710, 10.50000000000009600, 0.7853981633974500600 ) ; +#28520 = ORIENTED_EDGE ( 'NONE', *, *, #28259, .F. ) ; +#28521 = ORIENTED_EDGE ( 'NONE', *, *, #55695, .F. ) ; +#28522 = CARTESIAN_POINT ( 'NONE', ( 3.371418216713647300, 90.16749699759753900, -28.25056166218036000 ) ) ; +#28523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28524 = ADVANCED_FACE ( 'NONE', ( #47214 ), #61864, .T. ) ; +#28525 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#28526 = CARTESIAN_POINT ( 'NONE', ( -10.46481234601704300, 9.406791769321968000, -28.68794773163825000 ) ) ; +#28527 = AXIS2_PLACEMENT_3D ( 'NONE', #3789, #47286, #10068 ) ; +#28528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28529 = EDGE_CURVE ( 'NONE', #42271, #77818, #32433, .T. ) ; +#28530 = LINE ( 'NONE', #42579, #44980 ) ; +#28531 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63051, #57056, #63332, #26061 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362903600, 0.0007987676590766501700 ), + .UNSPECIFIED. ) ; +#28532 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999932100, 38.63176086632793000, -28.70555803802995200 ) ) ; +#28533 = PLANE ( 'NONE', #37013 ) ; +#28534 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28535 = EDGE_LOOP ( 'NONE', ( #17349, #12021, #22426, #41636 ) ) ; +#28536 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146265600, 61.25732391202370800, -28.20555803803030800 ) ) ; +#28537 = CARTESIAN_POINT ( 'NONE', ( -17.38218670428385000, 10.20504786954611700, -28.41843566569992800 ) ) ; +#28538 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 9.746602415621900700, -28.20555803802992800 ) ) ; +#28539 = FACE_OUTER_BOUND ( 'NONE', #80713, .T. ) ; +#28540 = VERTEX_POINT ( 'NONE', #73430 ) ; +#28541 = ADVANCED_FACE ( 'NONE', ( #80342 ), #28808, .F. ) ; +#28542 = EDGE_CURVE ( 'NONE', #14140, #25994, #17982, .T. ) ; +#28543 = ORIENTED_EDGE ( 'NONE', *, *, #65972, .T. ) ; +#28544 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576909000, 14.04999999999975700, -28.65220501466660300 ) ) ; +#28545 = AXIS2_PLACEMENT_3D ( 'NONE', #27284, #39755, #77022 ) ; +#28546 = ORIENTED_EDGE ( 'NONE', *, *, #58340, .T. ) ; +#28547 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28548 = CIRCLE ( 'NONE', #37654, 9.500000000000095900 ) ; +#28549 = VERTEX_POINT ( 'NONE', #67442 ) ; +#28550 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189904700, 38.62363993080123900, -28.38670679782146800 ) ) ; +#28551 = CONICAL_SURFACE ( 'NONE', #7499, 10.50000000000009600, 0.7853981633974500600 ) ; +#28552 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026328600, 35.05000000000001800, -28.70555803802995200 ) ) ; +#28553 = ORIENTED_EDGE ( 'NONE', *, *, #76042, .F. ) ; +#28554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28555 = ADVANCED_FACE ( 'NONE', ( #45252 ), #76420, .F. ) ; +#28556 = ORIENTED_EDGE ( 'NONE', *, *, #21058, .T. ) ; +#28557 = EDGE_LOOP ( 'NONE', ( #22656, #7942, #35890 ) ) ; +#28558 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-015, 37.62623792124938400, -28.70555803802995200 ) ) ; +#28559 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 40.30000000000008200, -28.70555803802995200 ) ) ; +#28560 = FACE_OUTER_BOUND ( 'NONE', #42796, .T. ) ; +#28561 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274347600, 83.66464174796072900, -28.53896444442202100 ) ) ; +#28562 = ORIENTED_EDGE ( 'NONE', *, *, #27122, .F. ) ; +#28563 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 4.166666666666675000, 9.794441961969994300 ) ) ; +#28564 = CONICAL_SURFACE ( 'NONE', #57670, 10.50000000000009600, 0.7853981633974518300 ) ; +#28565 = CARTESIAN_POINT ( 'NONE', ( -2.279102202939594900, 81.50050326225952800, -28.63287226700111500 ) ) ; +#28566 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 38.50000000000000000, -4.865812075874393000 ) ) ; +#28568 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922492900, 71.50962196508507400, -28.29483400905882800 ) ) ; +#28567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46839, #3337, #28422, #71912 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721227600, 0.0008252574424209051700 ), + .UNSPECIFIED. ) ; +#28569 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 3.500000000000008900, -7.061964498581016200 ) ) ; +#28570 = EDGE_CURVE ( 'NONE', #55807, #18858, #14167, .T. ) ; +#28571 = CARTESIAN_POINT ( 'NONE', ( 8.979183113973723700, 44.44999999999996700, 0.1857691769121437300 ) ) ; +#28572 = CARTESIAN_POINT ( 'NONE', ( -4.331040510084936700, 50.81480465755353000, -28.53901988778293100 ) ) ; +#28573 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 40.83333333333334300, 1.741883078712340300 ) ) ; +#28574 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14554, #76823, #14812, #58333 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.071812008677024000E-016, 0.001246264537621700600 ), + .UNSPECIFIED. ) ; +#28575 = CARTESIAN_POINT ( 'NONE', ( -11.00202872172426000, 30.81091476818470900, -28.25432823872344200 ) ) ; +#28576 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853719100, 61.25732391202397800, -28.20555803802997700 ) ) ; +#28577 = ORIENTED_EDGE ( 'NONE', *, *, #72600, .F. ) ; +#28578 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280411800, 47.44142842854296300, -28.37229765499284200 ) ) ; +#28579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28580 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28581 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444314000, 51.87833896172670500, -28.53892303408230500 ) ) ; +#28582 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#28583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28584 = CONICAL_SURFACE ( 'NONE', #8394, 10.50000000000009600, 0.7853981633974500600 ) ; +#28585 = ORIENTED_EDGE ( 'NONE', *, *, #6755, .T. ) ; +#28586 = FACE_OUTER_BOUND ( 'NONE', #33122, .T. ) ; +#28587 = EDGE_CURVE ( 'NONE', #61855, #49688, #1500, .T. ) ; +#28588 = EDGE_LOOP ( 'NONE', ( #18354, #2805, #47096 ) ) ; +#28589 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 82.31032580520964400, -28.59353418718925600 ) ) ; +#28590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28591 = FACE_OUTER_BOUND ( 'NONE', #61761, .T. ) ; +#28592 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#28593 = EDGE_CURVE ( 'NONE', #24588, #27705, #12217, .T. ) ; +#28594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28595 = VERTEX_POINT ( 'NONE', #73702 ) ; +#28596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28597 = VERTEX_POINT ( 'NONE', #11955 ) ; +#28598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28599 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28601 = EDGE_LOOP ( 'NONE', ( #25331, #13354, #24273 ) ) ; +#28602 = EDGE_CURVE ( 'NONE', #22567, #19042, #3495, .T. ) ; +#28603 = CONICAL_SURFACE ( 'NONE', #56105, 10.00000000000009200, 0.7853981633974447300 ) ; +#28604 = ADVANCED_FACE ( 'NONE', ( #63815 ), #74502, .T. ) ; +#28605 = CONICAL_SURFACE ( 'NONE', #53480, 10.00000000000009200, 0.7853981633974447300 ) ; +#28606 = EDGE_CURVE ( 'NONE', #56739, #74194, #69825, .T. ) ; +#28607 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#28608 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#28609 = ORIENTED_EDGE ( 'NONE', *, *, #43330, .F. ) ; +#28610 = AXIS2_PLACEMENT_3D ( 'NONE', #21869, #3611, #47114 ) ; +#28611 = CIRCLE ( 'NONE', #21199, 10.00000000000009200 ) ; +#28612 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 44.33333333333334300, 2.794441961969998300 ) ) ; +#28613 = ORIENTED_EDGE ( 'NONE', *, *, #56929, .F. ) ; +#28614 = CARTESIAN_POINT ( 'NONE', ( 7.995523693265348000E-015, 11.70037755566822600, -28.53664883431607900 ) ) ; +#28615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#28616 = ORIENTED_EDGE ( 'NONE', *, *, #60435, .T. ) ; +#28617 = VERTEX_POINT ( 'NONE', #5966 ) ; +#28618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28619 = ORIENTED_EDGE ( 'NONE', *, *, #73017, .F. ) ; +#28620 = FACE_OUTER_BOUND ( 'NONE', #31621, .T. ) ; +#28621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28622 = ADVANCED_FACE ( 'NONE', ( #10267 ), #41381, .T. ) ; +#28623 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 87.60073525436787600, -28.70555803803001600 ) ) ; +#28624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28625 = AXIS2_PLACEMENT_3D ( 'NONE', #3983, #53756, #16511 ) ; +#28626 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28628 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28629 = EDGE_CURVE ( 'NONE', #34753, #22988, #55354, .T. ) ; +#28630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39246, #14520, #33280, #76788 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169801700E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#28631 = EDGE_CURVE ( 'NONE', #9891, #55807, #26815, .T. ) ; +#28632 = ORIENTED_EDGE ( 'NONE', *, *, #29683, .T. ) ; +#28633 = AXIS2_PLACEMENT_3D ( 'NONE', #58559, #21323, #64851 ) ; +#28634 = ORIENTED_EDGE ( 'NONE', *, *, #3969, .T. ) ; +#28635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28636 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344325100, 41.67701665379241400, -28.20555803802997400 ) ) ; +#28637 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 54.66666666666668600, -8.133761268305512700 ) ) ; +#28638 = ORIENTED_EDGE ( 'NONE', *, *, #30031, .T. ) ; +#28639 = ADVANCED_FACE ( 'NONE', ( #78413 ), #72563, .T. ) ; +#28640 = CONICAL_SURFACE ( 'NONE', #57060, 10.00000000000009400, 0.7853981633974447300 ) ; +#28641 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28642 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428612000, 20.52858243452102700, -28.70555803802995200 ) ) ; +#28643 = ADVANCED_FACE ( 'NONE', ( #30719 ), #74768, .T. ) ; +#28644 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.43250300240228500, -28.20555803802997700 ) ) ; +#28645 = EDGE_CURVE ( 'NONE', #15529, #79210, #24856, .T. ) ; +#28646 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.60000000000000900, -19.79400493053296700 ) ) ; +#28647 = AXIS2_PLACEMENT_3D ( 'NONE', #76179, #38893, #1647 ) ; +#28648 = AXIS2_PLACEMENT_3D ( 'NONE', #48786, #55065, #5307 ) ; +#28649 = CARTESIAN_POINT ( 'NONE', ( 10.37150777124399400, 71.43250300240214300, -28.25053031809475000 ) ) ; +#28650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28651 = ADVANCED_FACE ( 'NONE', ( #57939 ), #6350, .F. ) ; +#28652 = CIRCLE ( 'NONE', #32565, 10.00000000000009200 ) ; +#28653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28654 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725705700, 77.93535825203885300, -28.53896444442226600 ) ) ; +#28655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78725, #35210, #47657, #10436 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572487064000E-007, 0.0004669842289003709200 ), + .UNSPECIFIED. ) ; +#28656 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28657 = ORIENTED_EDGE ( 'NONE', *, *, #4808, .T. ) ; +#28658 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 12.83333333333334100, 3.794441961969996900 ) ) ; +#28659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32712, #14486, #33253, #76755 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331885612900 ), + .UNSPECIFIED. ) ; +#28660 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846336700, 70.79999999999991200, -28.55171188418384500 ) ) ; +#28661 = ORIENTED_EDGE ( 'NONE', *, *, #13746, .F. ) ; +#28662 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999961800, 79.63176086632792300, -28.70555803802997700 ) ) ; +#28663 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 53.00000000000000700, 6.794441961969995200 ) ) ; +#28664 = FACE_OUTER_BOUND ( 'NONE', #11582, .T. ) ; +#28665 = AXIS2_PLACEMENT_3D ( 'NONE', #23187, #35696, #10410 ) ; +#28666 = ORIENTED_EDGE ( 'NONE', *, *, #57018, .F. ) ; +#28667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28668 = CIRCLE ( 'NONE', #4403, 9.500000000000099500 ) ; +#28669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28670 = ORIENTED_EDGE ( 'NONE', *, *, #6880, .T. ) ; +#28671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28672 = VERTEX_POINT ( 'NONE', #31527 ) ; +#28673 = FACE_OUTER_BOUND ( 'NONE', #10901, .T. ) ; +#28674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23756, #61022, #36246, #79773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001782579920905181400 ), + .UNSPECIFIED. ) ; +#28675 = FACE_OUTER_BOUND ( 'NONE', #9254, .T. ) ; +#28676 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28677 = ORIENTED_EDGE ( 'NONE', *, *, #40343, .T. ) ; +#28678 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 11.47376207875059300, -28.70555803802994200 ) ) ; +#28679 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963800, 74.37738371066723200, -28.70555803803047500 ) ) ; +#28680 = ORIENTED_EDGE ( 'NONE', *, *, #39263, .F. ) ; +#28681 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#28682 = VERTEX_POINT ( 'NONE', #37738 ) ; +#28683 = AXIS2_PLACEMENT_3D ( 'NONE', #62173, #24913, #68416 ) ; +#28684 = EDGE_CURVE ( 'NONE', #39774, #40334, #39427, .T. ) ; +#28686 = CIRCLE ( 'NONE', #74809, 10.00000000000009200 ) ; +#28685 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28687 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#28688 = ORIENTED_EDGE ( 'NONE', *, *, #7812, .T. ) ; +#28689 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28690 = FACE_OUTER_BOUND ( 'NONE', #17658, .T. ) ; +#28691 = AXIS2_PLACEMENT_3D ( 'NONE', #19372, #62914, #25656 ) ; +#28692 = ORIENTED_EDGE ( 'NONE', *, *, #56543, .T. ) ; +#28693 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828120700, 61.13768531620318200, -28.37082013777832800 ) ) ; +#28694 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008000, 26.44142842854304100, -28.20555803802994200 ) ) ; +#28695 = VERTEX_POINT ( 'NONE', #6747 ) ; +#28696 = EDGE_LOOP ( 'NONE', ( #23194, #27918, #33011, #21752 ) ) ; +#28697 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972358000, 72.22511094383838800, -28.55192314908438400 ) ) ; +#28698 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#28699 = ORIENTED_EDGE ( 'NONE', *, *, #37008, .T. ) ; +#28700 = ORIENTED_EDGE ( 'NONE', *, *, #8957, .F. ) ; +#28701 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28702 = EDGE_LOOP ( 'NONE', ( #66976, #49321, #14732, #54419, #57966 ) ) ; +#28703 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#28704 = CONICAL_SURFACE ( 'NONE', #29384, 10.50000000000009600, 0.7853981633974518300 ) ; +#28705 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823699600, 21.40456253568400800, -28.61277292027076100 ) ) ; +#28706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28707 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189800, 17.73827450271713600, -28.47230003642276600 ) ) ; +#28708 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28709 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74926, #12919, #6906, #50383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653072200 ), + .UNSPECIFIED. ) ; +#28710 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#28711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28712 = ORIENTED_EDGE ( 'NONE', *, *, #47468, .F. ) ; +#28713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28714 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618200, 80.79999999999968500, -28.55171188418406200 ) ) ; +#28715 = EDGE_CURVE ( 'NONE', #46762, #8218, #8269, .T. ) ; +#28716 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#28717 = VERTEX_POINT ( 'NONE', #43978 ) ; +#28718 = CONICAL_SURFACE ( 'NONE', #49158, 10.50000000000009600, 0.7853981633974500600 ) ; +#28719 = EDGE_CURVE ( 'NONE', #49030, #38695, #40921, .T. ) ; +#28720 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#28721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28722 = CARTESIAN_POINT ( 'NONE', ( -16.44668611327810800, 61.48387403443058500, -28.57421789838263800 ) ) ; +#28723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28724 = CARTESIAN_POINT ( 'NONE', ( -17.14620600645635700, 69.08128969594172000, -28.47270666107740700 ) ) ; +#28725 = EDGE_CURVE ( 'NONE', #65971, #67193, #22903, .T. ) ; +#28726 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28727 = EDGE_CURVE ( 'NONE', #30287, #10041, #70577, .T. ) ; +#28728 = AXIS2_PLACEMENT_3D ( 'NONE', #68728, #31488, #74988 ) ; +#28729 = CIRCLE ( 'NONE', #23618, 10.00000000000009200 ) ; +#28730 = ORIENTED_EDGE ( 'NONE', *, *, #54883, .T. ) ; +#28731 = ADVANCED_FACE ( 'NONE', ( #59911 ), #52050, .T. ) ; +#28732 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 59.00000000000001400, -1.205558038030005300 ) ) ; +#28733 = STYLED_ITEM ( 'NONE', ( #72495 ), #56500 ) ; +#28735 = ORIENTED_EDGE ( 'NONE', *, *, #6953, .F. ) ; +#28734 = EDGE_CURVE ( 'NONE', #9694, #28981, #68639, .T. ) ; +#28736 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528700, 24.54999999999997600, -28.20555803802994200 ) ) ; +#28737 = EDGE_CURVE ( 'NONE', #52622, #37874, #37460, .T. ) ; +#28738 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28739 = EDGE_CURVE ( 'NONE', #4048, #36682, #26485, .T. ) ; +#28740 = VERTEX_POINT ( 'NONE', #38523 ) ; +#28741 = ADVANCED_FACE ( 'NONE', ( #55978 ), #66691, .F. ) ; +#28742 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658317600, 81.44848545219042500, -28.67627428870433100 ) ) ; +#28743 = CONICAL_SURFACE ( 'NONE', #30268, 10.00000000000009600, 0.7853981633974482800 ) ; +#28744 = CONICAL_SURFACE ( 'NONE', #77321, 10.00000000000009200, 0.7853981633974447300 ) ; +#28745 = ORIENTED_EDGE ( 'NONE', *, *, #55260, .F. ) ; +#28746 = AXIS2_PLACEMENT_3D ( 'NONE', #21710, #3442, #28260 ) ; +#28747 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.07757630314203800, -28.53861367218591000 ) ) ; +#28748 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 53.16666666666667100, -3.349151577478988200 ) ) ; +#28749 = CIRCLE ( 'NONE', #18264, 10.50000000000009600 ) ; +#28750 = FACE_OUTER_BOUND ( 'NONE', #12473, .T. ) ; +#28751 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51763, #8253, #64354, #27074 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001119323292485956000 ), + .UNSPECIFIED. ) ; +#28752 = ORIENTED_EDGE ( 'NONE', *, *, #26314, .T. ) ; +#28753 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#28754 = EDGE_CURVE ( 'NONE', #15056, #68008, #18986, .T. ) ; +#28755 = ORIENTED_EDGE ( 'NONE', *, *, #33277, .F. ) ; +#28756 = AXIS2_PLACEMENT_3D ( 'NONE', #12277, #55753, #18517 ) ; +#28757 = AXIS2_PLACEMENT_3D ( 'NONE', #39435, #2164, #45653 ) ; +#28758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28760 = ADVANCED_FACE ( 'NONE', ( #2425 ), #11991, .T. ) ; +#28761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28762 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28763 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344312700, 20.67701665379241400, -28.20555803802994200 ) ) ; +#28764 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 30.33333333333333900, -6.705558038030005700 ) ) ; +#28765 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528190400, 39.13131911501876200, -28.51286550264508800 ) ) ; +#28766 = FACE_OUTER_BOUND ( 'NONE', #25830, .T. ) ; +#28767 = ORIENTED_EDGE ( 'NONE', *, *, #25949, .F. ) ; +#28768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28769 = CIRCLE ( 'NONE', #17973, 5.000000000000000900 ) ; +#28770 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#28771 = VERTEX_POINT ( 'NONE', #20618 ) ; +#28772 = VERTEX_POINT ( 'NONE', #64154 ) ; +#28773 = CARTESIAN_POINT ( 'NONE', ( 10.57226108320770000, 8.799999999999503300, -28.63329695482264000 ) ) ; +#28774 = EDGE_LOOP ( 'NONE', ( #51701, #46530, #18697, #32080, #73489, #44744, #61987, #48129, #389, #34246, #10823, #23896, #23834, #18587, #13434, #2040, #79684, #56854, #32797, #28850, #31550, #47979, #61510, #34722, #21855, #60977, #49599, #27963, #49639, #46470, #23715, #48400, #10228, #29543, #29491, #33592, #80365, #68626, #18177, #31095, #9337, #60751, #11414, #6225, #29912, #55864, #75169, #63205, #37620, #14111, #66599, #26154, #27285, #23893, #66756, #42431, #51840, #75510, #53854, #73160, #77700, #10579, #76294, #64586, #46704, #41751, #21847, #10465, #40422, #66419, #58889, #51784, #7957, #76766, #14630, #26624, #47799, #43755, #72855, #67500, #77919, #16376, #64410, #23791, #66362, #5969, #10535, #41247, #7999, #76940, #64429, #21196, #1226, #42774, #30897, #12732, #21765, #31242, #36999, #56163, #834, #37107, #10698, #71243, #35694, #205, #41851, #43428, #10694, #17787, #9144, #16504, #37578, #74998, #10844, #32338, #5892, #74696, #30083, #39055, #12652, #67347, #21118, #18717, #10737, #78524, #60352, #36268, #75363, #18449, #39556, #71086, #3954 ) ) ; +#28775 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.65857157145700300, -28.20555803802997700 ) ) ; +#28776 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#28777 = ORIENTED_EDGE ( 'NONE', *, *, #24844, .T. ) ; +#28778 = FACE_OUTER_BOUND ( 'NONE', #22810, .T. ) ; +#28779 = ORIENTED_EDGE ( 'NONE', *, *, #48778, .F. ) ; +#28780 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 51.43945992495517300, -28.34042301926893600 ) ) ; +#28781 = ORIENTED_EDGE ( 'NONE', *, *, #26325, .F. ) ; +#28782 = CARTESIAN_POINT ( 'NONE', ( -9.042760264135440100, 55.79999999999999700, -28.53819074160683700 ) ) ; +#28783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28784 = ORIENTED_EDGE ( 'NONE', *, *, #79238, .F. ) ; +#28785 = AXIS2_PLACEMENT_3D ( 'NONE', #64307, #27033, #70517 ) ; +#28786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28787 = CARTESIAN_POINT ( 'NONE', ( -11.74534273518455800, 10.00380841767821000, -28.64142799534453900 ) ) ; +#28788 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 64.83333333333334300, 3.794441961969996900 ) ) ; +#28789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28790 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .F. ) ; +#28791 = FACE_OUTER_BOUND ( 'NONE', #21307, .T. ) ; +#28792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28793 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339004500, 70.13716795162646600, -28.48697406221666000 ) ) ; +#28794 = CARTESIAN_POINT ( 'NONE', ( 4.533744140368694000, 91.59999999999999400, -28.70555803803016200 ) ) ; +#28795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28796 = AXIS2_PLACEMENT_3D ( 'NONE', #73486, #36226, #79738 ) ; +#28797 = CARTESIAN_POINT ( 'NONE', ( -15.24268566510272300, 9.878657167448636800, -28.70261278770272600 ) ) ; +#28798 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 43.43454006867177200, -28.70555803802999500 ) ) ; +#28799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28800 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11622, #48845, #24133, #67640 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0002670038068533322800 ), + .UNSPECIFIED. ) ; +#28801 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120802800, 80.38098890548040700, -28.33427604305568400 ) ) ; +#28802 = EDGE_CURVE ( 'NONE', #25889, #47514, #50092, .T. ) ; +#28803 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#28804 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116284200, 18.20564881207749900, -28.41114655922314100 ) ) ; +#28805 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28806 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28807 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195354600, 28.18365405593805700, -28.35038903107269400 ) ) ; +#28808 = CONICAL_SURFACE ( 'NONE', #79851, 10.50000000000009400, 0.7853981633974500600 ) ; +#28809 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #79642, #60898, #5104, #48593 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.698337096385111900, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999835454473604600, 0.9999835454473604600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#28810 = CARTESIAN_POINT ( 'NONE', ( 17.06616028005396800, 17.09406971703068500, -28.49013149708311200 ) ) ; +#28811 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9295, #46542, #52823, #15580 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723701300, 0.0008252574424211121500 ), + .UNSPECIFIED. ) ; +#28812 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171147300, 40.29999999999999000, -28.57107744631858600 ) ) ; +#28813 = ORIENTED_EDGE ( 'NONE', *, *, #39263, .T. ) ; +#28814 = CONICAL_SURFACE ( 'NONE', #34848, 10.00000000000009200, 0.7853981633974447300 ) ; +#28815 = CARTESIAN_POINT ( 'NONE', ( -4.957239735864011900, 85.79999999999998300, -28.53819074160730900 ) ) ; +#28817 = ORIENTED_EDGE ( 'NONE', *, *, #67405, .F. ) ; +#28816 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428581800, 28.57141756547892800, -28.70555803802994200 ) ) ; +#28818 = CARTESIAN_POINT ( 'NONE', ( -17.36049707220279400, 9.932503002402294000, -28.25438406275895900 ) ) ; +#28819 = ADVANCED_FACE ( 'NONE', ( #54029 ), #48150, .T. ) ; +#28820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6312, #62352, #312, #43807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.237823150468372500E-005, 0.0003590896259719824100 ), + .UNSPECIFIED. ) ; +#28821 = CIRCLE ( 'NONE', #39020, 10.50000000000009600 ) ; +#28822 = FACE_OUTER_BOUND ( 'NONE', #12565, .T. ) ; +#28824 = EDGE_CURVE ( 'NONE', #79766, #43457, #64766, .T. ) ; +#28823 = ORIENTED_EDGE ( 'NONE', *, *, #33536, .T. ) ; +#28825 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28826 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28827 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#28828 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 2.000000000000018700, -12.20555803803000200 ) ) ; +#28829 = EDGE_CURVE ( 'NONE', #47599, #50710, #4395, .T. ) ; +#28830 = FACE_OUTER_BOUND ( 'NONE', #2133, .T. ) ; +#28831 = ORIENTED_EDGE ( 'NONE', *, *, #12600, .T. ) ; +#28832 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28833 = ORIENTED_EDGE ( 'NONE', *, *, #30832, .T. ) ; +#28834 = ADVANCED_FACE ( 'NONE', ( #17061 ), #62803, .T. ) ; +#28835 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 36.33333333333332900, 3.124568980892187500 ) ) ; +#28836 = EDGE_CURVE ( 'NONE', #30178, #18676, #78325, .T. ) ; +#28837 = FACE_OUTER_BOUND ( 'NONE', #77070, .T. ) ; +#28838 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 1.333333333333339300, 5.722645192245503900 ) ) ; +#28839 = EDGE_CURVE ( 'NONE', #48987, #42340, #20966, .T. ) ; +#28840 = CIRCLE ( 'NONE', #3294, 10.00000000000009400 ) ; +#28841 = AXIS2_PLACEMENT_3D ( 'NONE', #17816, #36552, #80089 ) ; +#28842 = CARTESIAN_POINT ( 'NONE', ( 9.811079983384985300, 17.99322649091080400, -28.30799595738894000 ) ) ; +#28843 = ORIENTED_EDGE ( 'NONE', *, *, #74337, .F. ) ; +#28844 = EDGE_CURVE ( 'NONE', #30197, #25990, #63870, .T. ) ; +#28845 = ORIENTED_EDGE ( 'NONE', *, *, #16177, .F. ) ; +#28846 = CARTESIAN_POINT ( 'NONE', ( 7.332962580270509200, 44.44999999999972600, -7.116482926422913000 ) ) ; +#28847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28848 = VERTEX_POINT ( 'NONE', #39904 ) ; +#28849 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 38.66666666666667100, -6.705558038030000400 ) ) ; +#28850 = ORIENTED_EDGE ( 'NONE', *, *, #30353, .T. ) ; +#28851 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22553, #78322, #72343, #35091 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388532077300E-007, 0.0007987676590766542900 ), + .UNSPECIFIED. ) ; +#28852 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28853 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000001800, 19.90050506338822300, -28.70555803802995200 ) ) ; +#28854 = ORIENTED_EDGE ( 'NONE', *, *, #64190, .T. ) ; +#28855 = VECTOR ( 'NONE', #69451, 1000.000000000000000 ) ; +#28856 = VERTEX_POINT ( 'NONE', #15152 ) ; +#28857 = AXIS2_PLACEMENT_3D ( 'NONE', #7810, #76361, #39084 ) ; +#28858 = ORIENTED_EDGE ( 'NONE', *, *, #10481, .F. ) ; +#28859 = EDGE_CURVE ( 'NONE', #12763, #62602, #79343, .T. ) ; +#28860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37438, #74739, #56222, #62488 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610285500, 0.0004765929656973896400 ), + .UNSPECIFIED. ) ; +#28861 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#28862 = EDGE_CURVE ( 'NONE', #16633, #69684, #49347, .T. ) ; +#28863 = CARTESIAN_POINT ( 'NONE', ( -17.26457816485414300, 20.78307383672421300, -28.44650835714145700 ) ) ; +#28864 = EDGE_CURVE ( 'NONE', #77263, #53681, #31648, .T. ) ; +#28865 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#28866 = ADVANCED_FACE ( 'NONE', ( #33590 ), #52664, .T. ) ; +#28867 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28868 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 60.37705528805136600, -28.20555803802997700 ) ) ; +#28869 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 81.43945992495501700, -28.34042301926910000 ) ) ; +#28870 = CONICAL_SURFACE ( 'NONE', #58123, 10.00000000000009200, 0.7853981633974415100 ) ; +#28871 = AXIS2_PLACEMENT_3D ( 'NONE', #55279, #18040, #61569 ) ; +#28872 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528041060700, 33.15857157145700300, -28.37229765499284500 ) ) ; +#28873 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28874 = ORIENTED_EDGE ( 'NONE', *, *, #50697, .T. ) ; +#28875 = CIRCLE ( 'NONE', #75172, 9.500000000000095900 ) ; +#28876 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28877 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537338500, 61.25732391202388500, -28.20555803803014400 ) ) ; +#28878 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#28879 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 80.90033558196108700, -28.70555803802997700 ) ) ; +#28880 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528388900, 41.46868088498140300, -28.51286550264485000 ) ) ; +#28881 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28882 = AXIS2_PLACEMENT_3D ( 'NONE', #26838, #33080, #76589 ) ; +#28883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28884 = AXIS2_PLACEMENT_3D ( 'NONE', #45689, #45411, #27259 ) ; +#28885 = EDGE_LOOP ( 'NONE', ( #51495, #72675, #4903 ) ) ; +#28886 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576920400, 24.54999999999999700, -28.65220501466659200 ) ) ; +#28887 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#28888 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#28889 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#28890 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 42.16666666666665000, -3.349151577478988200 ) ) ; +#28891 = FACE_OUTER_BOUND ( 'NONE', #37209, .T. ) ; +#28892 = FACE_OUTER_BOUND ( 'NONE', #14426, .T. ) ; +#28893 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346247900, 61.39409401757625100, -28.39369363572359400 ) ) ; +#28894 = ORIENTED_EDGE ( 'NONE', *, *, #33598, .F. ) ; +#28895 = FACE_OUTER_BOUND ( 'NONE', #53531, .T. ) ; +#28896 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 79.94924284854654700, -28.20555803803014400 ) ) ; +#28897 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#28898 = AXIS2_PLACEMENT_3D ( 'NONE', #27714, #2639, #21455 ) ; +#28899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28900 = CARTESIAN_POINT ( 'NONE', ( 0.3148986621841964900, 57.15000000000000600, 7.397431990877534800 ) ) ; +#28901 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#28902 = ORIENTED_EDGE ( 'NONE', *, *, #70828, .F. ) ; +#28903 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309796800, 55.79999999999999000, -28.70555803802997700 ) ) ; +#28904 = CONICAL_SURFACE ( 'NONE', #10352, 10.00000000000009200, 0.7853981633974447300 ) ; +#28905 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 17.81066373133502300, -28.53923937255167000 ) ) ; +#28906 = LINE ( 'NONE', #2265, #43418 ) ; +#28907 = ORIENTED_EDGE ( 'NONE', *, *, #4486, .F. ) ; +#28908 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 56.83333333333335000, 6.794441961969994300 ) ) ; +#28910 = EDGE_CURVE ( 'NONE', #43518, #63818, #34951, .T. ) ; +#28909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42934, #80212, #49170, #11956 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641853914612900E-007, 0.0008759659331882608600 ), + .UNSPECIFIED. ) ; +#28911 = CARTESIAN_POINT ( 'NONE', ( -17.07349184251535900, 70.22161678501183200, -28.29547179040443400 ) ) ; +#28912 = AXIS2_PLACEMENT_3D ( 'NONE', #44160, #75224, #688 ) ; +#28914 = ORIENTED_EDGE ( 'NONE', *, *, #18950, .T. ) ; +#28913 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28915 = EDGE_LOOP ( 'NONE', ( #46024, #14752, #40710, #62481, #42754 ) ) ; +#28916 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28917 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 44.44999999999999600, -1.205558038030003500 ) ) ; +#28918 = ADVANCED_FACE ( 'NONE', ( #29725 ), #44234, .F. ) ; +#28919 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50693, #26000, #32229, #75724 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259737495400E-007, 0.0004559721492002198000 ), + .UNSPECIFIED. ) ; +#28920 = CONICAL_SURFACE ( 'NONE', #34559, 10.00000000000009200, 0.7853981633974447300 ) ; +#28921 = ORIENTED_EDGE ( 'NONE', *, *, #19861, .F. ) ; +#28922 = AXIS2_PLACEMENT_3D ( 'NONE', #7617, #32394, #1363 ) ; +#28923 = EDGE_LOOP ( 'NONE', ( #78609, #2992, #80615, #74364 ) ) ; +#28924 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 70.34267608797603100, -28.20555803802997700 ) ) ; +#28925 = VERTEX_POINT ( 'NONE', #40688 ) ; +#28926 = VERTEX_POINT ( 'NONE', #3428 ) ; +#28927 = ORIENTED_EDGE ( 'NONE', *, *, #52965, .T. ) ; +#28928 = FACE_OUTER_BOUND ( 'NONE', #46347, .T. ) ; +#28929 = ADVANCED_FACE ( 'NONE', ( #60855 ), #11208, .F. ) ; +#28930 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 10.66666666666667500, -5.535685056952199400 ) ) ; +#28931 = ORIENTED_EDGE ( 'NONE', *, *, #46006, .F. ) ; +#28932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49748, #56030, #74813, #37513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917699779000E-007, 0.0004089036991175759600 ), + .UNSPECIFIED. ) ; +#28933 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#28934 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#28935 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 50.83333333333335000, -9.205558038030003900 ) ) ; +#28936 = VERTEX_POINT ( 'NONE', #59487 ) ; +#28937 = CIRCLE ( 'NONE', #27912, 10.00000000000009400 ) ; +#28938 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28939 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 36.94142842854297000, -28.20555803802995200 ) ) ; +#28940 = EDGE_CURVE ( 'NONE', #36192, #13589, #27765, .T. ) ; +#28941 = ADVANCED_FACE ( 'NONE', ( #15091 ), #42310, .F. ) ; +#28942 = ORIENTED_EDGE ( 'NONE', *, *, #4007, .F. ) ; +#28943 = PLANE ( 'NONE', #12270 ) ; +#28944 = CIRCLE ( 'NONE', #28273, 9.500000000000097700 ) ; +#28945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28946 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28948 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28947 = CIRCLE ( 'NONE', #63199, 10.00000000000009200 ) ; +#28949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28950 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17522, #23771, #42503, #5258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711464381900E-007, 0.0008482615949374441500 ), + .UNSPECIFIED. ) ; +#28951 = VERTEX_POINT ( 'NONE', #9968 ) ; +#28952 = ADVANCED_FACE ( 'NONE', ( #77379 ), #9211, .T. ) ; +#28953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28954 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 17.91070809551053200, -28.20555803802992800 ) ) ; +#28955 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#28956 = EDGE_CURVE ( 'NONE', #70073, #79921, #25809, .T. ) ; +#28957 = EDGE_CURVE ( 'NONE', #56951, #67964, #13171, .T. ) ; +#28958 = CONICAL_SURFACE ( 'NONE', #72484, 10.50000000000009200, 0.7853981633974482800 ) ; +#28959 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 60.90033558196090300, -28.70555803803014400 ) ) ; +#28960 = ORIENTED_EDGE ( 'NONE', *, *, #61943, .T. ) ; +#28961 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28963 = CIRCLE ( 'NONE', #31104, 10.00000000000009400 ) ; +#28964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28965 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528430600, 39.13131911501858400, -28.51286550264481800 ) ) ; +#28966 = ORIENTED_EDGE ( 'NONE', *, *, #31228, .T. ) ; +#28967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28968 = ORIENTED_EDGE ( 'NONE', *, *, #34156, .F. ) ; +#28969 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#28971 = VERTEX_POINT ( 'NONE', #10249 ) ; +#28970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28972 = FACE_OUTER_BOUND ( 'NONE', #15039, .T. ) ; +#28973 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 51.43945992495517300, -28.34042301926893600 ) ) ; +#28974 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 75.79999999999999700, -28.20555803802997700 ) ) ; +#28975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28976 = AXIS2_PLACEMENT_3D ( 'NONE', #80457, #43167, #5938 ) ; +#28977 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 60.79999999999999000, -28.45034744217088700 ) ) ; +#28978 = EDGE_CURVE ( 'NONE', #31689, #38547, #46197, .T. ) ; +#28979 = CARTESIAN_POINT ( 'NONE', ( -3.778746597914907300, 49.66476742015635900, -28.30311934730018600 ) ) ; +#28980 = EDGE_CURVE ( 'NONE', #26822, #59799, #20478, .T. ) ; +#28981 = VERTEX_POINT ( 'NONE', #10511 ) ; +#28982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28983 = EDGE_CURVE ( 'NONE', #49730, #14293, #58873, .T. ) ; +#28984 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063461900, 31.09789380924872800, -28.25343951603344500 ) ) ; +#28985 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#28986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28987 = AXIS2_PLACEMENT_3D ( 'NONE', #77053, #64573, #8753 ) ; +#28988 = CONICAL_SURFACE ( 'NONE', #31804, 10.50000000000009600, 0.7853981633974500600 ) ; +#28989 = ORIENTED_EDGE ( 'NONE', *, *, #24542, .F. ) ; +#28990 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#28991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28993 = ORIENTED_EDGE ( 'NONE', *, *, #35583, .T. ) ; +#28994 = AXIS2_PLACEMENT_3D ( 'NONE', #36216, #79731, #42444 ) ; +#28995 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274707400, 35.05000000000000400, -28.20555803802995200 ) ) ; +#28996 = AXIS2_PLACEMENT_3D ( 'NONE', #9164, #21728, #58961 ) ; +#28997 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#28998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28999 = AXIS2_PLACEMENT_3D ( 'NONE', #53318, #59318, #71841 ) ; +#29000 = CARTESIAN_POINT ( 'NONE', ( 17.40093558791435400, 61.69271233864081700, -28.41359472476252200 ) ) ; +#29001 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56223, #43953, #62785, #25519 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610484200, 0.0004765929656968651600 ), + .UNSPECIFIED. ) ; +#29002 = CIRCLE ( 'NONE', #14056, 10.50000000000009200 ) ; +#29003 = CIRCLE ( 'NONE', #39165, 10.00000000000009200 ) ; +#29004 = ORIENTED_EDGE ( 'NONE', *, *, #27375, .F. ) ; +#29005 = VERTEX_POINT ( 'NONE', #54009 ) ; +#29006 = VERTEX_POINT ( 'NONE', #11131 ) ; +#29007 = ORIENTED_EDGE ( 'NONE', *, *, #62274, .F. ) ; +#29008 = VERTEX_POINT ( 'NONE', #48350 ) ; +#29009 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 56.83333333333335700, 0.9380355014189731800 ) ) ; +#29010 = AXIS2_PLACEMENT_3D ( 'NONE', #26537, #38988, #76012 ) ; +#29011 = VERTEX_POINT ( 'NONE', #67151 ) ; +#29012 = EDGE_CURVE ( 'NONE', #40041, #62959, #483, .T. ) ; +#29013 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .T. ) ; +#29014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29015 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 87.94142842854296300, -28.20555803802997700 ) ) ; +#29016 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811644100, 41.39435118792235400, -28.41114655922302400 ) ) ; +#29017 = ADVANCED_FACE ( 'NONE', ( #56934 ), #23643, .T. ) ; +#29019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15574, #34067, #65386, #28112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099545519779900E-007, 0.0008759529789572965700 ), + .UNSPECIFIED. ) ; +#29018 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 69.28967419478898600, -28.59353418718932400 ) ) ; +#29020 = CIRCLE ( 'NONE', #75751, 10.00000000000009400 ) ; +#29021 = VERTEX_POINT ( 'NONE', #61180 ) ; +#29022 = EDGE_CURVE ( 'NONE', #51112, #29008, #40370, .T. ) ; +#29023 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 51.00000000000001400, -1.205558038030006400 ) ) ; +#29024 = ORIENTED_EDGE ( 'NONE', *, *, #51235, .T. ) ; +#29025 = AXIS2_PLACEMENT_3D ( 'NONE', #57708, #20469, #64000 ) ; +#29026 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 27.69543746431598300, -28.61277292027075700 ) ) ; +#29027 = CONICAL_SURFACE ( 'NONE', #17803, 10.50000000000009600, 0.7853981633974500600 ) ; +#29028 = ADVANCED_FACE ( 'NONE', ( #73477 ), #21894, .T. ) ; +#29029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9228, #46472, #52765, #15518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.551292896529412100E-016, 0.001043664170964749000 ), + .UNSPECIFIED. ) ; +#29030 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29032 = ORIENTED_EDGE ( 'NONE', *, *, #13205, .F. ) ; +#29031 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 36.94142842854307000, -28.20555803802995200 ) ) ; +#29033 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 28.16666666666667500, 1.741883078712356500 ) ) ; +#29034 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000002700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#29035 = AXIS2_PLACEMENT_3D ( 'NONE', #17205, #60731, #23458 ) ; +#29036 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488149600, 79.60439022488343100, -28.70555803803014400 ) ) ; +#29037 = CONICAL_SURFACE ( 'NONE', #8806, 10.00000000000009200, 0.7853981633974447300 ) ; +#29038 = EDGE_LOOP ( 'NONE', ( #68627, #9746, #79050, #58992, #61619 ) ) ; +#29039 = ADVANCED_FACE ( 'NONE', ( #7264 ), #69560, .F. ) ; +#29040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72178, #47360, #66181, #28954 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520770300, 0.004414519045341141000 ), + .UNSPECIFIED. ) ; +#29041 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29042 = PLANE ( 'NONE', #69343 ) ; +#29043 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 51.25732391202397800, -28.20555803802997700 ) ) ; +#29044 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29045 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#29046 = ADVANCED_FACE ( 'NONE', ( #38392 ), #36458, .T. ) ; +#29047 = CONICAL_SURFACE ( 'NONE', #15413, 10.00000000000009400, 0.7853981633974447300 ) ; +#29048 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466689700, 28.30869142985028800, -28.37223374938521700 ) ) ; +#29049 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #74563, #6272 ) ; +#29050 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78856, #35341, #72590, #41559 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704003960500 ), + .UNSPECIFIED. ) ; +#29051 = ADVANCED_FACE ( 'NONE', ( #5346 ), #3370, .T. ) ; +#29052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29053 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 85.67652461701983700, -28.70555803803014400 ) ) ; +#29054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29055 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29056 = EDGE_CURVE ( 'NONE', #26822, #72475, #6007, .T. ) ; +#29057 = CONICAL_SURFACE ( 'NONE', #23949, 10.00000000000009400, 0.7853981633974447300 ) ; +#29058 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 62.66666666666667100, -5.535685056952199400 ) ) ; +#29059 = EDGE_LOOP ( 'NONE', ( #44848, #16389, #11067, #78105 ) ) ; +#29060 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 41.96823913367203600, -28.70555803802997700 ) ) ; +#29061 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718938700, 61.13768531620324600, -28.37082013777818200 ) ) ; +#29062 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29063 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 72.97376207875058200, -28.70555803802997700 ) ) ; +#29064 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 9.746602415621548900, -28.20555803803025800 ) ) ; +#29065 = ORIENTED_EDGE ( 'NONE', *, *, #58727, .T. ) ; +#29066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29067 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29069 = CARTESIAN_POINT ( 'NONE', ( -16.62989890881925000, 18.98699567717055800, -28.57183973513140200 ) ) ; +#29070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29071 = FACE_OUTER_BOUND ( 'NONE', #39402, .T. ) ; +#29072 = CONICAL_SURFACE ( 'NONE', #57897, 10.50000000000009600, 0.7853981633974482800 ) ; +#29073 = CARTESIAN_POINT ( 'NONE', ( 11.72090442826396000, 61.50050415885208800, -28.63287458792268200 ) ) ; +#29074 = VERTEX_POINT ( 'NONE', #24442 ) ; +#29075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29076 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29078 = EDGE_CURVE ( 'NONE', #18567, #12868, #72349, .T. ) ; +#29077 = EDGE_LOOP ( 'NONE', ( #52032, #51217, #62222, #73593 ) ) ; +#29079 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#29080 = ORIENTED_EDGE ( 'NONE', *, *, #24137, .F. ) ; +#29081 = ORIENTED_EDGE ( 'NONE', *, *, #36188, .T. ) ; +#29082 = ORIENTED_EDGE ( 'NONE', *, *, #63600, .T. ) ; +#29083 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29084 = ORIENTED_EDGE ( 'NONE', *, *, #17577, .F. ) ; +#29085 = ORIENTED_EDGE ( 'NONE', *, *, #48990, .T. ) ; +#29086 = CARTESIAN_POINT ( 'NONE', ( -16.81665446367276900, 6.893879557620969000, -28.20555803802992800 ) ) ; +#29087 = ORIENTED_EDGE ( 'NONE', *, *, #19767, .T. ) ; +#29088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29089 = AXIS2_PLACEMENT_3D ( 'NONE', #60019, #22743, #66276 ) ; +#29090 = ORIENTED_EDGE ( 'NONE', *, *, #2913, .F. ) ; +#29091 = EDGE_CURVE ( 'NONE', #9849, #9646, #57857, .T. ) ; +#29092 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 45.55000000000000400, -28.20555803802996700 ) ) ; +#29093 = EDGE_CURVE ( 'NONE', #55748, #38804, #19945, .T. ) ; +#29094 = CARTESIAN_POINT ( 'NONE', ( -16.44668611327810100, 71.48387403443058500, -28.57421789838263800 ) ) ; +#29095 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11387, #9474, #17637, #61164 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399032258543000E-007, 0.0009968645831863801300 ), + .UNSPECIFIED. ) ; +#29096 = EDGE_CURVE ( 'NONE', #38334, #78678, #54963, .T. ) ; +#29097 = CONICAL_SURFACE ( 'NONE', #33429, 10.50000000000009600, 0.7853981633974518300 ) ; +#29098 = AXIS2_PLACEMENT_3D ( 'NONE', #3503, #47005, #9789 ) ; +#29099 = ORIENTED_EDGE ( 'NONE', *, *, #38179, .T. ) ; +#29101 = ORIENTED_EDGE ( 'NONE', *, *, #12856, .F. ) ; +#29100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29103 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, -0.1666666666666588000, 9.794441961969999600 ) ) ; +#29104 = ORIENTED_EDGE ( 'NONE', *, *, #41286, .F. ) ; +#29105 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534584500, 39.99920551340398600, -28.70555803802995200 ) ) ; +#29106 = FACE_OUTER_BOUND ( 'NONE', #51676, .T. ) ; +#29107 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 34.16666666666668600, -6.205558038030004800 ) ) ; +#29108 = AXIS2_PLACEMENT_3D ( 'NONE', #72354, #78607, #16311 ) ; +#29110 = ORIENTED_EDGE ( 'NONE', *, *, #59441, .F. ) ; +#29109 = AXIS2_PLACEMENT_3D ( 'NONE', #20185, #26722, #1657 ) ; +#29111 = ORIENTED_EDGE ( 'NONE', *, *, #78549, .F. ) ; +#29112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29113 = EDGE_CURVE ( 'NONE', #39538, #27352, #23860, .T. ) ; +#29114 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, -0.8333333333333119400, -9.205558038030003900 ) ) ; +#29115 = AXIS2_PLACEMENT_3D ( 'NONE', #9742, #53247, #16001 ) ; +#29116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29117 = FACE_OUTER_BOUND ( 'NONE', #63054, .T. ) ; +#29118 = ORIENTED_EDGE ( 'NONE', *, *, #71057, .T. ) ; +#29119 = CARTESIAN_POINT ( 'NONE', ( -0.1739132575419406700, 44.45000000000003800, -10.71380029655192900 ) ) ; +#29120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29121 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 36.50000000000001400, 6.847000845227641200 ) ) ; +#29122 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#29123 = ORIENTED_EDGE ( 'NONE', *, *, #10357, .T. ) ; +#29124 = ORIENTED_EDGE ( 'NONE', *, *, #68855, .T. ) ; +#29125 = EDGE_CURVE ( 'NONE', #12464, #74407, #43380, .T. ) ; +#29126 = AXIS2_PLACEMENT_3D ( 'NONE', #37128, #30908, #80669 ) ; +#29127 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14408, #76411, #20667, #64215 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390020749300E-007, 0.0008082646680357293300 ), + .UNSPECIFIED. ) ; +#29128 = AXIS2_PLACEMENT_3D ( 'NONE', #33162, #39404, #57919 ) ; +#29129 = CARTESIAN_POINT ( 'NONE', ( 15.16936419303818600, 46.90150480447867700, -28.70555803803001600 ) ) ; +#29130 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390709100, 71.46283204837338600, -28.48697406221672800 ) ) ; +#29131 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148628700, 25.50238095238078300, -28.70555803802994200 ) ) ; +#29132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29133 = CARTESIAN_POINT ( 'NONE', ( 24.95632335044942400, 5.021990500206108300, -19.78604313321043800 ) ) ; +#29134 = CIRCLE ( 'NONE', #1980, 9.500000000000095900 ) ; +#29135 = CARTESIAN_POINT ( 'NONE', ( 10.75702442553472300, 80.16517473503375900, -28.29551658696729900 ) ) ; +#29136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29137 = CIRCLE ( 'NONE', #6193, 10.00000000000009200 ) ; +#29138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46293, #71366, #77610, #40335 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799282739100E-007, 0.0005050252131287595200 ), + .UNSPECIFIED. ) ; +#29139 = ORIENTED_EDGE ( 'NONE', *, *, #79924, .F. ) ; +#29140 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306341800, 31.09789380924877000, -28.25343951603343100 ) ) ; +#29141 = ORIENTED_EDGE ( 'NONE', *, *, #21784, .F. ) ; +#29142 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205871200, 80.08245724453603000, -28.27504145778806300 ) ) ; +#29143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29144 = ADVANCED_FACE ( 'NONE', ( #53005 ), #1421, .F. ) ; +#29145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29146 = ADVANCED_FACE ( 'NONE', ( #75426 ), #49088, .F. ) ; +#29147 = CIRCLE ( 'NONE', #13914, 9.500000000000097700 ) ; +#29148 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753500, 38.57379779496241000, -28.70555803802995200 ) ) ; +#29149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29150 = ORIENTED_EDGE ( 'NONE', *, *, #23098, .F. ) ; +#29151 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29153 = FACE_OUTER_BOUND ( 'NONE', #80488, .T. ) ; +#29154 = AXIS2_PLACEMENT_3D ( 'NONE', #1801, #45301, #8061 ) ; +#29155 = ORIENTED_EDGE ( 'NONE', *, *, #45533, .F. ) ; +#29156 = ORIENTED_EDGE ( 'NONE', *, *, #35117, .T. ) ; +#29157 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 40.00000000000000700, -1.205558038030005300 ) ) ; +#29158 = ORIENTED_EDGE ( 'NONE', *, *, #41052, .F. ) ; +#29159 = CONICAL_SURFACE ( 'NONE', #12143, 10.00000000000009400, 0.7853981633974447300 ) ; +#29160 = ORIENTED_EDGE ( 'NONE', *, *, #24507, .T. ) ; +#29162 = ORIENTED_EDGE ( 'NONE', *, *, #24752, .F. ) ; +#29161 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875029300, 86.46717019299444500, -28.53914313452769100 ) ) ; +#29163 = ORIENTED_EDGE ( 'NONE', *, *, #41895, .T. ) ; +#29164 = ORIENTED_EDGE ( 'NONE', *, *, #54233, .F. ) ; +#29165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29167 = AXIS2_PLACEMENT_3D ( 'NONE', #79403, #42098, #4857 ) ; +#29169 = ORIENTED_EDGE ( 'NONE', *, *, #66983, .T. ) ; +#29168 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29171 = CARTESIAN_POINT ( 'NONE', ( -5.907843150314942400, 57.15000000000004100, 5.844384208317926300 ) ) ; +#29172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29174 = ADVANCED_FACE ( 'NONE', ( #71529 ), #16034, .F. ) ; +#29173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64865, #33828, #58839, #21605 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353298044800E-007, 0.0007670609591623583300 ), + .UNSPECIFIED. ) ; +#29175 = EDGE_CURVE ( 'NONE', #77362, #46068, #32571, .T. ) ; +#29176 = FACE_OUTER_BOUND ( 'NONE', #19546, .T. ) ; +#29177 = ORIENTED_EDGE ( 'NONE', *, *, #73121, .F. ) ; +#29178 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29180 = ORIENTED_EDGE ( 'NONE', *, *, #56923, .T. ) ; +#29181 = ORIENTED_EDGE ( 'NONE', *, *, #68582, .F. ) ; +#29182 = ORIENTED_EDGE ( 'NONE', *, *, #12372, .T. ) ; +#29183 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.66749699759768100, -28.20555803802996700 ) ) ; +#29184 = ORIENTED_EDGE ( 'NONE', *, *, #41999, .F. ) ; +#29185 = CARTESIAN_POINT ( 'NONE', ( -20.20597494163094200, 7.397015076076464800, -27.24360281274600800 ) ) ; +#29186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29187 = CONICAL_SURFACE ( 'NONE', #71906, 10.00000000000009200, 0.7853981633974447300 ) ; +#29188 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450500, 86.12096679557670600, -28.36604143581858400 ) ) ; +#29189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29190 = ORIENTED_EDGE ( 'NONE', *, *, #73038, .T. ) ; +#29191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33023, #70000, #20524, #39256 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082140605200E-007, 0.0007679735311067967000 ), + .UNSPECIFIED. ) ; +#29192 = EDGE_CURVE ( 'NONE', #35769, #13531, #29001, .T. ) ; +#29193 = FACE_OUTER_BOUND ( 'NONE', #78594, .T. ) ; +#29194 = ORIENTED_EDGE ( 'NONE', *, *, #57515, .F. ) ; +#29195 = EDGE_CURVE ( 'NONE', #31617, #54435, #65692, .T. ) ; +#29196 = ORIENTED_EDGE ( 'NONE', *, *, #20927, .T. ) ; +#29197 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 8.500000000000007100, 2.454695999814385600 ) ) ; +#29198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29199 = EDGE_CURVE ( 'NONE', #40807, #66928, #14477, .T. ) ; +#29200 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654653800, 90.27440177985806700, -28.29986836858026000 ) ) ; +#29201 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 48.66666666666667900, 5.722645192245505700 ) ) ; +#29202 = EDGE_CURVE ( 'NONE', #3913, #57259, #51028, .T. ) ; +#29203 = AXIS2_PLACEMENT_3D ( 'NONE', #64359, #27077, #70568 ) ; +#29204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29205 = FACE_OUTER_BOUND ( 'NONE', #51298, .T. ) ; +#29206 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, 69.97246552159074900, -28.38801640354893200 ) ) ; +#29207 = FACE_OUTER_BOUND ( 'NONE', #77143, .T. ) ; +#29208 = VERTEX_POINT ( 'NONE', #63321 ) ; +#29209 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8265, #70575, #8546, #52047 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562394900, 0.001296017758337971000 ), + .UNSPECIFIED. ) ; +#29210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29211 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.86762008758048400, -28.26633708900883200 ) ) ; +#29212 = ORIENTED_EDGE ( 'NONE', *, *, #75726, .T. ) ; +#29213 = AXIS2_PLACEMENT_3D ( 'NONE', #80273, #5747, #36742 ) ; +#29214 = EDGE_CURVE ( 'NONE', #44982, #40242, #80801, .T. ) ; +#29215 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.39610994602603400, -28.37519436813180100 ) ) ; +#29216 = EDGE_CURVE ( 'NONE', #64449, #15003, #17987, .T. ) ; +#29217 = EDGE_CURVE ( 'NONE', #54740, #30469, #66350, .T. ) ; +#29218 = ADVANCED_FACE ( 'NONE', ( #34550 ), #78331, .T. ) ; +#29220 = CARTESIAN_POINT ( 'NONE', ( -13.15658593308207700, 50.55000000000000400, -28.46503906384592100 ) ) ; +#29219 = AXIS2_PLACEMENT_3D ( 'NONE', #55853, #18610, #62135 ) ; +#29221 = CONICAL_SURFACE ( 'NONE', #57619, 10.50000000000009600, 0.7853981633974518300 ) ; +#29223 = ORIENTED_EDGE ( 'NONE', *, *, #19371, .F. ) ; +#29222 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 51.35277818615383400, -28.70555803803016200 ) ) ; +#29224 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29225 = CONICAL_SURFACE ( 'NONE', #50465, 10.50000000000009600, 0.7853981633974500600 ) ; +#29226 = ORIENTED_EDGE ( 'NONE', *, *, #68949, .T. ) ; +#29227 = AXIS2_PLACEMENT_3D ( 'NONE', #75479, #50957, #7458 ) ; +#29228 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174765400, 71.43945992495534400, -28.34042301926881900 ) ) ; +#29229 = CIRCLE ( 'NONE', #45935, 10.00000000000009200 ) ; +#29230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29231 = VERTEX_POINT ( 'NONE', #57572 ) ; +#29232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29233 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 71.65075715145216900, -28.20555803803047800 ) ) ; +#29234 = ORIENTED_EDGE ( 'NONE', *, *, #33790, .F. ) ; +#29235 = ORIENTED_EDGE ( 'NONE', *, *, #10707, .T. ) ; +#29236 = VERTEX_POINT ( 'NONE', #7774 ) ; +#29237 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180452700, 71.65075715145293600, -28.20555803802997700 ) ) ; +#29238 = VERTEX_POINT ( 'NONE', #1537 ) ; +#29239 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390810400, 44.91466791010177700, -28.53910738522652900 ) ) ; +#29241 = ORIENTED_EDGE ( 'NONE', *, *, #42809, .F. ) ; +#29240 = EDGE_CURVE ( 'NONE', #40425, #68043, #51822, .T. ) ; +#29242 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#29243 = ADVANCED_FACE ( 'NONE', ( #30653 ), #45165, .F. ) ; +#29244 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29246 = AXIS2_PLACEMENT_3D ( 'NONE', #41215, #78509, #28762 ) ; +#29247 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29248 = AXIS2_PLACEMENT_3D ( 'NONE', #17187, #66962, #35687 ) ; +#29249 = ORIENTED_EDGE ( 'NONE', *, *, #36623, .F. ) ; +#29250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29251 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851514300, 13.09761904761874600, -28.70555803803025800 ) ) ; +#29252 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 28.47246552159108600, -28.38801640354855800 ) ) ; +#29253 = CARTESIAN_POINT ( 'NONE', ( 10.95973104149399200, 9.875614624812483200, -28.30309985153387900 ) ) ; +#29254 = CIRCLE ( 'NONE', #26076, 10.00000000000009600 ) ; +#29255 = ORIENTED_EDGE ( 'NONE', *, *, #25992, .F. ) ; +#29256 = ORIENTED_EDGE ( 'NONE', *, *, #52996, .F. ) ; +#29257 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475900, 14.04999999999976600, -28.20555803803009500 ) ) ; +#29258 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#29259 = ORIENTED_EDGE ( 'NONE', *, *, #45404, .F. ) ; +#29260 = ORIENTED_EDGE ( 'NONE', *, *, #31641, .F. ) ; +#29261 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 90.34267608797551900, -28.20555803803014400 ) ) ; +#29262 = ORIENTED_EDGE ( 'NONE', *, *, #15799, .T. ) ; +#29263 = ORIENTED_EDGE ( 'NONE', *, *, #8401, .T. ) ; +#29264 = CARTESIAN_POINT ( 'NONE', ( -9.042760264135443600, 65.79999999999998300, -28.53819074160684000 ) ) ; +#29265 = CONICAL_SURFACE ( 'NONE', #62941, 10.50000000000009900, 0.7853981633974518300 ) ; +#29266 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29267 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063463700, 41.59789380924871700, -28.25343951603346000 ) ) ; +#29268 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725655100, 53.66464174796075100, -28.53896444442201400 ) ) ; +#29269 = ORIENTED_EDGE ( 'NONE', *, *, #36238, .F. ) ; +#29270 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#29271 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#29272 = ORIENTED_EDGE ( 'NONE', *, *, #69396, .T. ) ; +#29274 = ADVANCED_FACE ( 'NONE', ( #14087 ), #12144, .F. ) ; +#29273 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14878, #52101, #64676, #27417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001557521951676458700, 0.0008094403908210595700 ), + .UNSPECIFIED. ) ; +#29275 = AXIS2_PLACEMENT_3D ( 'NONE', #6466, #56230, #43700 ) ; +#29276 = CONICAL_SURFACE ( 'NONE', #43599, 10.00000000000009400, 0.7853981633974447300 ) ; +#29277 = ORIENTED_EDGE ( 'NONE', *, *, #51800, .F. ) ; +#29278 = VERTEX_POINT ( 'NONE', #64131 ) ; +#29279 = ORIENTED_EDGE ( 'NONE', *, *, #55325, .F. ) ; +#29280 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 54.66666666666668600, -5.205558038030003100 ) ) ; +#29281 = AXIS2_PLACEMENT_3D ( 'NONE', #47184, #9958, #53481 ) ; +#29282 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 73.67681279774508600, -28.70555803803030800 ) ) ; +#29283 = EDGE_CURVE ( 'NONE', #50025, #65707, #28729, .T. ) ; +#29284 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000001800, 57.22261628933269200, -28.70555803802997700 ) ) ; +#29285 = AXIS2_PLACEMENT_3D ( 'NONE', #59281, #22037, #28331 ) ; +#29286 = CIRCLE ( 'NONE', #65190, 9.500000000000099500 ) ; +#29287 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 71.25732391202386400, -28.20555803803014400 ) ) ; +#29288 = ORIENTED_EDGE ( 'NONE', *, *, #16538, .F. ) ; +#29289 = ORIENTED_EDGE ( 'NONE', *, *, #16746, .F. ) ; +#29290 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29291 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048100, 70.69949493661160000, -28.70555803803030800 ) ) ; +#29292 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999622500, 54.13556610137279500, -28.54207364681969500 ) ) ; +#29293 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 26.00000000000001100, -1.205558038030002800 ) ) ; +#29294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29295 = CIRCLE ( 'NONE', #28976, 10.50000000000009600 ) ; +#29296 = EDGE_LOOP ( 'NONE', ( #56497, #51290, #56535, #53379, #30582 ) ) ; +#29297 = ORIENTED_EDGE ( 'NONE', *, *, #16303, .T. ) ; +#29298 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999300, 79.81066373133471400, -28.53923937255202100 ) ) ; +#29299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29300 = EDGE_CURVE ( 'NONE', #34604, #71216, #61787, .T. ) ; +#29301 = EDGE_LOOP ( 'NONE', ( #60122, #59310, #17424 ) ) ; +#29302 = FACE_OUTER_BOUND ( 'NONE', #12284, .T. ) ; +#29303 = EDGE_CURVE ( 'NONE', #26683, #59983, #67628, .T. ) ; +#29304 = EDGE_LOOP ( 'NONE', ( #23757, #77578, #8141, #79519, #74398 ) ) ; +#29305 = EDGE_LOOP ( 'NONE', ( #6064, #66809, #27513, #13833, #8621, #78089 ) ) ; +#29306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44697, #63282, #13779, #57260 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388488191000E-007, 0.0007987676590766394300 ), + .UNSPECIFIED. ) ; +#29307 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29308 = ORIENTED_EDGE ( 'NONE', *, *, #8969, .T. ) ; +#29309 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#29310 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653730600, 61.39409401757593800, -28.39369363572386400 ) ) ; +#29311 = ORIENTED_EDGE ( 'NONE', *, *, #66704, .F. ) ; +#29312 = EDGE_CURVE ( 'NONE', #51458, #35216, #63746, .T. ) ; +#29313 = ADVANCED_FACE ( 'NONE', ( #80261 ), #74428, .F. ) ; +#29314 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865854900, 30.68727262089430500, -28.28853693900642000 ) ) ; +#29315 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857150800, 47.42318720225497900, -28.70555803802996700 ) ) ; +#29316 = EDGE_CURVE ( 'NONE', #77331, #4762, #37381, .T. ) ; +#29318 = ORIENTED_EDGE ( 'NONE', *, *, #65147, .F. ) ; +#29317 = AXIS2_PLACEMENT_3D ( 'NONE', #34225, #77734, #40468 ) ; +#29319 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 51.46283204837339300, -28.48697406221667100 ) ) ; +#29320 = CIRCLE ( 'NONE', #43189, 10.00000000000009400 ) ; +#29321 = ORIENTED_EDGE ( 'NONE', *, *, #48528, .F. ) ; +#29322 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 60.50000000000001400, 2.454695999814385600 ) ) ; +#29323 = ORIENTED_EDGE ( 'NONE', *, *, #60524, .T. ) ; +#29324 = EDGE_CURVE ( 'NONE', #39293, #5295, #59842, .T. ) ; +#29325 = CARTESIAN_POINT ( 'NONE', ( 24.88560645924178200, 0.1143935407576739100, -20.53921242634119400 ) ) ; +#29326 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29327 = ORIENTED_EDGE ( 'NONE', *, *, #73003, .F. ) ; +#29328 = VERTEX_POINT ( 'NONE', #77138 ) ; +#29329 = VERTEX_POINT ( 'NONE', #58641 ) ; +#29330 = ORIENTED_EDGE ( 'NONE', *, *, #70349, .F. ) ; +#29331 = CIRCLE ( 'NONE', #7611, 9.500000000000097700 ) ; +#29332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29333 = ADVANCED_FACE ( 'NONE', ( #26745 ), #24776, .T. ) ; +#29334 = CARTESIAN_POINT ( 'NONE', ( 16.62945163024045300, 50.47932830827776500, -28.57191320155292800 ) ) ; +#29335 = AXIS2_PLACEMENT_3D ( 'NONE', #44337, #7115, #50614 ) ; +#29336 = ORIENTED_EDGE ( 'NONE', *, *, #69645, .T. ) ; +#29337 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#29338 = EDGE_CURVE ( 'NONE', #60061, #17490, #22963, .T. ) ; +#29339 = EDGE_CURVE ( 'NONE', #52833, #34215, #10186, .T. ) ; +#29340 = EDGE_CURVE ( 'NONE', #25195, #43147, #8457, .T. ) ; +#29341 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 20.43250300240229200, -28.20555803802995200 ) ) ; +#29342 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 10.00000000000000000, -28.70555803803001300 ) ) ; +#29343 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949248600, 17.57379779496225000, -28.70555803803009500 ) ) ; +#29344 = AXIS2_PLACEMENT_3D ( 'NONE', #14114, #1838, #70115 ) ; +#29345 = CARTESIAN_POINT ( 'NONE', ( 3.935438998026983300, 81.50961459723740200, -28.29483879644656200 ) ) ; +#29346 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528425300, 28.63131911501858100, -28.51286550264480400 ) ) ; +#29347 = CIRCLE ( 'NONE', #35776, 10.00000000000009600 ) ; +#29349 = ORIENTED_EDGE ( 'NONE', *, *, #80340, .F. ) ; +#29348 = ADVANCED_FACE ( 'NONE', ( #57864 ), #55903, .T. ) ; +#29350 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 85.80000000000001100, -28.70555803802997700 ) ) ; +#29351 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#29352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29353 = EDGE_CURVE ( 'NONE', #77015, #63545, #74812, .T. ) ; +#29354 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372564900, 12.16464174796073600, -28.53896444442197800 ) ) ; +#29355 = AXIS2_PLACEMENT_3D ( 'NONE', #48698, #11491, #54973 ) ; +#29356 = AXIS2_PLACEMENT_3D ( 'NONE', #38203, #956, #44435 ) ; +#29357 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#29358 = ADVANCED_FACE ( 'NONE', ( #76354 ), #22829, .F. ) ; +#29359 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#29360 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 66.83333333333334300, -12.20555803803000600 ) ) ; +#29361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24375, #61648, #49343, #12131 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.356538679906350400E-015, 0.001492013864198220500 ), + .UNSPECIFIED. ) ; +#29362 = ORIENTED_EDGE ( 'NONE', *, *, #57625, .F. ) ; +#29363 = ORIENTED_EDGE ( 'NONE', *, *, #30369, .T. ) ; +#29364 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 33.17681279774500100, -28.70555803802996700 ) ) ; +#29365 = ORIENTED_EDGE ( 'NONE', *, *, #43750, .F. ) ; +#29366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16169, #3626, #28722, #72214 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662540104000, 0.0007090531776679431400 ), + .UNSPECIFIED. ) ; +#29367 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 32.00000000000000700, 3.794441961969998300 ) ) ; +#29368 = AXIS2_PLACEMENT_3D ( 'NONE', #18556, #62089, #24816 ) ; +#29369 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#29370 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#29371 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857150800, 43.67681279774500800, -28.70555803802997700 ) ) ; +#29372 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -2.999999999999988900, 6.794441961969995200 ) ) ; +#29373 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9027, #52545, #3047, #46545 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750182296100, 0.005168056621189871100 ), + .UNSPECIFIED. ) ; +#29374 = FACE_OUTER_BOUND ( 'NONE', #33998, .T. ) ; +#29375 = AXIS2_PLACEMENT_3D ( 'NONE', #79652, #11401, #54893 ) ; +#29376 = VERTEX_POINT ( 'NONE', #15668 ) ; +#29377 = ORIENTED_EDGE ( 'NONE', *, *, #27638, .T. ) ; +#29378 = CARTESIAN_POINT ( 'NONE', ( -7.763344620102036400, 44.45000000000041500, -6.418710367670494900 ) ) ; +#29379 = EDGE_CURVE ( 'NONE', #7865, #20639, #60374, .T. ) ; +#29380 = CIRCLE ( 'NONE', #5225, 10.00000000000009400 ) ; +#29381 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 34.33333333333334300, -10.73183747965883100 ) ) ; +#29382 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230957000, 19.81139552890386900, -28.53900456328624800 ) ) ; +#29383 = ORIENTED_EDGE ( 'NONE', *, *, #54520, .F. ) ; +#29384 = AXIS2_PLACEMENT_3D ( 'NONE', #25681, #1156, #38395 ) ; +#29385 = EDGE_LOOP ( 'NONE', ( #2853, #7783, #29603, #72115 ) ) ; +#29386 = ORIENTED_EDGE ( 'NONE', *, *, #70052, .F. ) ; +#29387 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965677300, 17.92298334620755900, -28.20555803803042500 ) ) ; +#29388 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29389 = ORIENTED_EDGE ( 'NONE', *, *, #60270, .F. ) ; +#29390 = VERTEX_POINT ( 'NONE', #15938 ) ; +#29391 = AXIS2_PLACEMENT_3D ( 'NONE', #66657, #29432, #72917 ) ; +#29392 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11923, #55417, #30691, #74218 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.350390914822542300E-015, 0.001492013864200188600 ), + .UNSPECIFIED. ) ; +#29393 = FACE_OUTER_BOUND ( 'NONE', #9092, .T. ) ; +#29394 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#29395 = CARTESIAN_POINT ( 'NONE', ( 24.06695059429412000, 5.466765235304513300, -22.96263440737762800 ) ) ; +#29396 = FACE_OUTER_BOUND ( 'NONE', #60550, .T. ) ; +#29397 = AXIS2_PLACEMENT_3D ( 'NONE', #40692, #53497, #3699 ) ; +#29398 = EDGE_LOOP ( 'NONE', ( #10017, #76374, #44333, #65748 ) ) ; +#29399 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29401 = PLANE ( 'NONE', #12185 ) ; +#29402 = ORIENTED_EDGE ( 'NONE', *, *, #13198, .T. ) ; +#29403 = CARTESIAN_POINT ( 'NONE', ( 11.42773891679212600, 8.799999999999503300, -28.63329695482264000 ) ) ; +#29404 = ORIENTED_EDGE ( 'NONE', *, *, #31213, .T. ) ; +#29405 = VERTEX_POINT ( 'NONE', #40669 ) ; +#29406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29407 = ORIENTED_EDGE ( 'NONE', *, *, #36651, .F. ) ; +#29408 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 71.65075715145309200, -28.20555803802998100 ) ) ; +#29409 = FACE_OUTER_BOUND ( 'NONE', #34804, .T. ) ; +#29410 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#29411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3830, #41367, #60159, #22887 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669798843764800E-007, 0.0005050252131283721400 ), + .UNSPECIFIED. ) ; +#29412 = ADVANCED_FACE ( 'NONE', ( #47141 ), #70494, .T. ) ; +#29413 = EDGE_LOOP ( 'NONE', ( #66262, #11458, #32383, #32996 ) ) ; +#29414 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#29415 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305507200, 81.89604671418347000, -28.70555803803002000 ) ) ; +#29416 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 41.78933626866496800, -28.53923937255173000 ) ) ; +#29417 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.49747404049692500, -28.26641963845900200 ) ) ; +#29418 = EDGE_CURVE ( 'NONE', #29777, #76453, #6269, .T. ) ; +#29419 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 37.83333333333333600, 0.9380355014189731800 ) ) ; +#29420 = CARTESIAN_POINT ( 'NONE', ( -2.997971278275625400, 9.810914768184783700, -28.25432823872352000 ) ) ; +#29421 = FACE_OUTER_BOUND ( 'NONE', #6092, .T. ) ; +#29422 = EDGE_LOOP ( 'NONE', ( #15693, #16320, #2473, #18969, #31994, #30017, #3505 ) ) ; +#29423 = EDGE_CURVE ( 'NONE', #74718, #15610, #43251, .T. ) ; +#29424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29425 = ADVANCED_FACE ( 'NONE', ( #8192 ), #4325, .T. ) ; +#29426 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#29427 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 30.74660241562189700, -28.20555803802995200 ) ) ; +#29428 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#29429 = CARTESIAN_POINT ( 'NONE', ( -9.434168514153697100, 57.14999999999999100, -0.5302819530500714200 ) ) ; +#29430 = EDGE_CURVE ( 'NONE', #18232, #44206, #45845, .T. ) ; +#29431 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29433 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#29434 = EDGE_CURVE ( 'NONE', #4812, #55345, #31441, .T. ) ; +#29435 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 70.69966441803875100, -28.70555803802997700 ) ) ; +#29436 = EDGE_CURVE ( 'NONE', #20123, #63067, #20885, .T. ) ; +#29437 = ADVANCED_FACE ( 'NONE', ( #41314 ), #35489, .F. ) ; +#29438 = EDGE_LOOP ( 'NONE', ( #16568, #11400, #33137, #77648 ) ) ; +#29439 = CARTESIAN_POINT ( 'NONE', ( -22.78232275380138500, 6.108841056331740100, -24.98534604677516300 ) ) ; +#29440 = ORIENTED_EDGE ( 'NONE', *, *, #10955, .F. ) ; +#29441 = ADVANCED_FACE ( 'NONE', ( #53953 ), #60281, .T. ) ; +#29442 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29443 = AXIS2_PLACEMENT_3D ( 'NONE', #72884, #35630, #79148 ) ; +#29444 = EDGE_CURVE ( 'NONE', #38060, #79988, #16975, .T. ) ; +#29445 = EDGE_CURVE ( 'NONE', #16845, #38287, #18000, .T. ) ; +#29446 = EDGE_CURVE ( 'NONE', #13039, #49739, #3519, .T. ) ; +#29447 = ADVANCED_FACE ( 'NONE', ( #72485 ), #35525, .T. ) ; +#29448 = CIRCLE ( 'NONE', #17367, 10.50000000000009600 ) ; +#29449 = ORIENTED_EDGE ( 'NONE', *, *, #2568, .F. ) ; +#29450 = ORIENTED_EDGE ( 'NONE', *, *, #23435, .T. ) ; +#29451 = AXIS2_PLACEMENT_3D ( 'NONE', #23617, #67129, #29906 ) ; +#29452 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 11.09027028261003000, -28.70555803802993500 ) ) ; +#29453 = CONICAL_SURFACE ( 'NONE', #78150, 10.50000000000009400, 0.7853981633974500600 ) ; +#29454 = ORIENTED_EDGE ( 'NONE', *, *, #52123, .F. ) ; +#29455 = ORIENTED_EDGE ( 'NONE', *, *, #64694, .T. ) ; +#29456 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#29457 = ORIENTED_EDGE ( 'NONE', *, *, #19129, .T. ) ; +#29458 = AXIS2_PLACEMENT_3D ( 'NONE', #29369, #16821, #66591 ) ; +#29460 = VERTEX_POINT ( 'NONE', #54533 ) ; +#29459 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 6.333333333333346400, -3.705558038030004400 ) ) ; +#29461 = ORIENTED_EDGE ( 'NONE', *, *, #9196, .T. ) ; +#29462 = AXIS2_PLACEMENT_3D ( 'NONE', #49293, #74365, #24583 ) ; +#29463 = AXIS2_PLACEMENT_3D ( 'NONE', #32774, #76282, #39009 ) ; +#29464 = FACE_OUTER_BOUND ( 'NONE', #74770, .T. ) ; +#29465 = CARTESIAN_POINT ( 'NONE', ( 3.959729345560836200, 28.72438272935921300, -28.30310183417006400 ) ) ; +#29466 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 46.50000000000001400, -7.061964498581022400 ) ) ; +#29467 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28315, #46447, #34538, #78039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648675523200E-007, 0.0007596411030278581900 ), + .UNSPECIFIED. ) ; +#29468 = ORIENTED_EDGE ( 'NONE', *, *, #14159, .F. ) ; +#29469 = CIRCLE ( 'NONE', #52477, 10.00000000000009200 ) ; +#29470 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#29471 = ORIENTED_EDGE ( 'NONE', *, *, #4826, .T. ) ; +#29472 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274714700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#29473 = ORIENTED_EDGE ( 'NONE', *, *, #46391, .T. ) ; +#29474 = ORIENTED_EDGE ( 'NONE', *, *, #51117, .F. ) ; +#29475 = VERTEX_POINT ( 'NONE', #42006 ) ; +#29476 = CARTESIAN_POINT ( 'NONE', ( -10.95973104149358200, 41.37561462481245700, -28.30309985153376200 ) ) ; +#29477 = CIRCLE ( 'NONE', #69485, 10.50000000000009600 ) ; +#29478 = ORIENTED_EDGE ( 'NONE', *, *, #77181, .T. ) ; +#29479 = PLANE ( 'NONE', #23975 ) ; +#29480 = CIRCLE ( 'NONE', #64392, 9.500000000000097700 ) ; +#29481 = AXIS2_PLACEMENT_3D ( 'NONE', #60385, #23116, #16851 ) ; +#29482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29483 = EDGE_CURVE ( 'NONE', #74850, #30200, #68563, .T. ) ; +#29484 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73262, #29769, #79515, #42208 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782195500, 0.0004366687057309881100 ), + .UNSPECIFIED. ) ; +#29485 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430900, 20.67701665379241000, -28.20555803802994500 ) ) ; +#29486 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548966000, 30.94069092601377900, -28.35186440610858200 ) ) ; +#29487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29488 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#29489 = CARTESIAN_POINT ( 'NONE', ( 10.53052054780199700, 91.59999999999999400, -28.70555803803024400 ) ) ; +#29490 = CONICAL_SURFACE ( 'NONE', #59120, 10.00000000000009200, 0.7853981633974447300 ) ; +#29491 = ORIENTED_EDGE ( 'NONE', *, *, #4108, .T. ) ; +#29492 = EDGE_CURVE ( 'NONE', #44553, #39327, #39346, .T. ) ; +#29493 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29494 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14762, #58267, #33517, #77039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284225800, 0.0006028148015512312200 ), + .UNSPECIFIED. ) ; +#29495 = AXIS2_PLACEMENT_3D ( 'NONE', #3981, #9976, #41238 ) ; +#29496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29499 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#29501 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25328, #19045, #56293, #31576 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721133300, 0.0008252574424209437700 ), + .UNSPECIFIED. ) ; +#29500 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29502 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957538300, 48.50972971738993800, -28.70555803802996700 ) ) ; +#29503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29505 = CARTESIAN_POINT ( 'NONE', ( 11.00202872172467600, 9.810914768184748200, -28.25432823872357700 ) ) ; +#29506 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 73.65857157145660500, -28.20555803803030800 ) ) ; +#29507 = AXIS2_PLACEMENT_3D ( 'NONE', #8860, #52109, #52372 ) ; +#29508 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 61.46283204837325800, -28.48697406221693400 ) ) ; +#29509 = VERTEX_POINT ( 'NONE', #23530 ) ; +#29510 = VERTEX_POINT ( 'NONE', #11301 ) ; +#29511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29512 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#29513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29514 = AXIS2_PLACEMENT_3D ( 'NONE', #73656, #17635, #48590 ) ; +#29515 = CARTESIAN_POINT ( 'NONE', ( 2.279102202939412800, 51.50050326225953500, -28.63287226700119300 ) ) ; +#29516 = CARTESIAN_POINT ( 'NONE', ( 4.118917725798676000, 81.10238820582958400, -28.32098513914488100 ) ) ; +#29517 = CYLINDRICAL_SURFACE ( 'NONE', #26208, 10.00000000000000200 ) ; +#29518 = ORIENTED_EDGE ( 'NONE', *, *, #35983, .T. ) ; +#29519 = CONICAL_SURFACE ( 'NONE', #31583, 10.00000000000009600, 0.7853981633974447300 ) ; +#29521 = EDGE_CURVE ( 'NONE', #38435, #3260, #18915, .T. ) ; +#29520 = ORIENTED_EDGE ( 'NONE', *, *, #78023, .F. ) ; +#29522 = ORIENTED_EDGE ( 'NONE', *, *, #13466, .F. ) ; +#29523 = CONICAL_SURFACE ( 'NONE', #18383, 10.00000000000009400, 0.7853981633974447300 ) ; +#29524 = ORIENTED_EDGE ( 'NONE', *, *, #56107, .F. ) ; +#29525 = EDGE_LOOP ( 'NONE', ( #7152, #9921, #31045, #70809 ) ) ; +#29526 = ADVANCED_FACE ( 'NONE', ( #66618 ), #64683, .F. ) ; +#29527 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 52.50000000000001400, 4.650848422521012700 ) ) ; +#29528 = ORIENTED_EDGE ( 'NONE', *, *, #34507, .F. ) ; +#29529 = CIRCLE ( 'NONE', #32176, 10.50000000000009800 ) ; +#29530 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344310900, 38.92298334620755900, -28.20555803802996000 ) ) ; +#29531 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #990, #38238, #19785, #63316 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727633014994100E-007, 0.0004064396303279555000 ), + .UNSPECIFIED. ) ; +#29532 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#29533 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171144800, 29.79999999999999000, -28.57107744631859000 ) ) ; +#29534 = ADVANCED_FACE ( 'NONE', ( #50015 ), #31577, .F. ) ; +#29535 = EDGE_LOOP ( 'NONE', ( #61767, #45073, #51678 ) ) ; +#29536 = EDGE_CURVE ( 'NONE', #47477, #76933, #48077, .T. ) ; +#29537 = CONICAL_SURFACE ( 'NONE', #28009, 10.00000000000009200, 0.7853981633974415100 ) ; +#29538 = EDGE_CURVE ( 'NONE', #70673, #31373, #69847, .T. ) ; +#29539 = ORIENTED_EDGE ( 'NONE', *, *, #26672, .F. ) ; +#29540 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571445700, 31.02858243452105600, -28.70555803802996700 ) ) ; +#29541 = ORIENTED_EDGE ( 'NONE', *, *, #2892, .F. ) ; +#29542 = ORIENTED_EDGE ( 'NONE', *, *, #68562, .F. ) ; +#29543 = ORIENTED_EDGE ( 'NONE', *, *, #38338, .T. ) ; +#29544 = FACE_OUTER_BOUND ( 'NONE', #73287, .T. ) ; +#29545 = AXIS2_PLACEMENT_3D ( 'NONE', #13911, #57413, #20166 ) ; +#29546 = ORIENTED_EDGE ( 'NONE', *, *, #58099, .F. ) ; +#29547 = EDGE_CURVE ( 'NONE', #21953, #37106, #55379, .T. ) ; +#29548 = EDGE_CURVE ( 'NONE', #53788, #11971, #16978, .T. ) ; +#29549 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 60.90033558196107300, -28.70555803802997700 ) ) ; +#29550 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378067200, 90.82516071402385200, -28.57108397021908900 ) ) ; +#29551 = ADVANCED_FACE ( 'NONE', ( #33511 ), #79263, .T. ) ; +#29552 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719608500, 87.94142842854243700, -28.37229765499316900 ) ) ; +#29553 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#29554 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29555 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 23.83333333333333900, -4.152999154772353500 ) ) ; +#29556 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29557 = VERTEX_POINT ( 'NONE', #43080 ) ; +#29558 = EDGE_CURVE ( 'NONE', #34397, #30974, #40934, .T. ) ; +#29559 = AXIS2_PLACEMENT_3D ( 'NONE', #43878, #50133, #387 ) ; +#29560 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725302100, 24.54999999999999700, -28.20555803802994200 ) ) ; +#29561 = VERTEX_POINT ( 'NONE', #24608 ) ; +#29562 = CYLINDRICAL_SURFACE ( 'NONE', #24767, 10.00000000000000200 ) ; +#29563 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#29564 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999975100, 80.16749699759752400, -28.20555803803014400 ) ) ; +#29565 = AXIS2_PLACEMENT_3D ( 'NONE', #47095, #53386, #3594 ) ; +#29566 = AXIS2_PLACEMENT_3D ( 'NONE', #67908, #24396, #80426 ) ; +#29567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57617, #51056, #76381, #39099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.725075965559604900E-016, 0.001179148174663456700 ), + .UNSPECIFIED. ) ; +#29568 = CARTESIAN_POINT ( 'NONE', ( -20.39379004392026200, 101.5850925059259000, -19.26264825924358000 ) ) ; +#29569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29570 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29571 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 58.33333333333334300, -3.705558038030004400 ) ) ; +#29572 = VECTOR ( 'NONE', #77490, 1000.000000000000000 ) ; +#29573 = CARTESIAN_POINT ( 'NONE', ( 23.83038445412218600, 5.584807772938817500, -23.43868275677213800 ) ) ; +#29574 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#29575 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25016, #31278, #49989, #12791 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646240300, 0.0009605145132142130800 ), + .UNSPECIFIED. ) ; +#29576 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29577 = VERTEX_POINT ( 'NONE', #68114 ) ; +#29578 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510925300, 49.97143078992716200, -28.37063977681169600 ) ) ; +#29579 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29580 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#29581 = AXIS2_PLACEMENT_3D ( 'NONE', #59327, #22070, #65601 ) ; +#29582 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995699800, 13.11903418172676800, -28.69431509262337700 ) ) ; +#29583 = EDGE_CURVE ( 'NONE', #19038, #25889, #51960, .T. ) ; +#29584 = ORIENTED_EDGE ( 'NONE', *, *, #69534, .T. ) ; +#29585 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29586 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040369800, 43.65857157145701700, -28.37229765499279600 ) ) ; +#29587 = EDGE_LOOP ( 'NONE', ( #26782, #46017, #45964, #484 ) ) ; +#29588 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#29589 = FACE_OUTER_BOUND ( 'NONE', #4494, .T. ) ; +#29590 = CARTESIAN_POINT ( 'NONE', ( 10.54785758564420700, 9.001892960388543600, -28.65770045238613400 ) ) ; +#29591 = VERTEX_POINT ( 'NONE', #80356 ) ; +#29592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29594 = CIRCLE ( 'NONE', #40375, 10.50000000000009800 ) ; +#29595 = VERTEX_POINT ( 'NONE', #30871 ) ; +#29596 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180860400, 81.65075715145344800, -28.20555803803030800 ) ) ; +#29597 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174632600, 60.16054007504464400, -28.34042301926885100 ) ) ; +#29598 = EDGE_CURVE ( 'NONE', #56108, #9667, #26500, .T. ) ; +#29599 = CONICAL_SURFACE ( 'NONE', #66295, 10.50000000000009600, 0.7853981633974500600 ) ; +#29600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29601 = VERTEX_POINT ( 'NONE', #68385 ) ; +#29602 = EDGE_LOOP ( 'NONE', ( #44430, #63786, #47127, #24572, #57561, #54073 ) ) ; +#29603 = ORIENTED_EDGE ( 'NONE', *, *, #30033, .F. ) ; +#29604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29605 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#29606 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187874100, 20.60186521182829400, -28.24089224568488300 ) ) ; +#29607 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042460800, 27.50972971738994500, -28.70555803802994500 ) ) ; +#29608 = ADVANCED_FACE ( 'NONE', ( #402 ), #77293, .F. ) ; +#29609 = VECTOR ( 'NONE', #71794, 1000.000000000000000 ) ; +#29610 = ORIENTED_EDGE ( 'NONE', *, *, #58472, .T. ) ; +#29611 = AXIS2_PLACEMENT_3D ( 'NONE', #71371, #15617, #65138 ) ; +#29612 = FACE_OUTER_BOUND ( 'NONE', #16385, .T. ) ; +#29613 = ORIENTED_EDGE ( 'NONE', *, *, #55718, .T. ) ; +#29614 = CARTESIAN_POINT ( 'NONE', ( -11.51258998854904400, 60.12140959735999200, -28.55996453402214300 ) ) ; +#29615 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 64.66666666666667100, 8.320721403598824400 ) ) ; +#29616 = ORIENTED_EDGE ( 'NONE', *, *, #41295, .T. ) ; +#29617 = EDGE_LOOP ( 'NONE', ( #71737, #74473, #74414, #27792, #4021 ) ) ; +#29618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29619 = ORIENTED_EDGE ( 'NONE', *, *, #78771, .F. ) ; +#29620 = ADVANCED_FACE ( 'NONE', ( #15014 ), #44153, .T. ) ; +#29621 = VECTOR ( 'NONE', #17977, 1000.000000000000000 ) ; +#29622 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 29.83333333333334600, -6.205558038030004800 ) ) ; +#29623 = AXIS2_PLACEMENT_3D ( 'NONE', #78152, #40876, #3600 ) ; +#29624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29626 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51170, #7685, #57481, #20228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671518119700E-007, 0.0007670610367944447500 ), + .UNSPECIFIED. ) ; +#29627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29628 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29629 = ORIENTED_EDGE ( 'NONE', *, *, #18907, .F. ) ; +#29630 = ORIENTED_EDGE ( 'NONE', *, *, #4604, .T. ) ; +#29631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29632 = ORIENTED_EDGE ( 'NONE', *, *, #37577, .T. ) ; +#29633 = CARTESIAN_POINT ( 'NONE', ( -8.767214559564653300, 44.45000000000000300, 0.5648450014137638100 ) ) ; +#29634 = FACE_OUTER_BOUND ( 'NONE', #8178, .T. ) ; +#29635 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 32.16666666666667900, 9.794441961969994300 ) ) ; +#29636 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29637 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#29638 = CARTESIAN_POINT ( 'NONE', ( -3.360598542614462200, 49.66749699759768100, -28.25434854811490100 ) ) ; +#29639 = ADVANCED_FACE ( 'NONE', ( #13086 ), #11132, .F. ) ; +#29640 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29641 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29642 = CARTESIAN_POINT ( 'NONE', ( 21.23740004204471900, 6.881619767110743500, -26.52754074986262700 ) ) ; +#29643 = FACE_OUTER_BOUND ( 'NONE', #45711, .T. ) ; +#29644 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999577200, 71.78933626866489700, -28.53923937255180500 ) ) ; +#29645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29646 = EDGE_CURVE ( 'NONE', #76953, #20496, #12019, .T. ) ; +#29647 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72026, #15978, #28537, #34760 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061279900, 0.004414112765716370100 ), + .UNSPECIFIED. ) ; +#29648 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#29649 = CARTESIAN_POINT ( 'NONE', ( 19.31566246560252900, 100.2316494310956300, -23.76244992968288700 ) ) ; +#29650 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484787100, 81.37838321498799100, -28.29547179040463000 ) ) ; +#29652 = ORIENTED_EDGE ( 'NONE', *, *, #1959, .T. ) ; +#29651 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#29653 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29654 = EDGE_CURVE ( 'NONE', #14733, #70595, #78346, .T. ) ; +#29655 = CARTESIAN_POINT ( 'NONE', ( -17.40887775794658800, 18.42043992774118200, -28.41154406527801500 ) ) ; +#29656 = ORIENTED_EDGE ( 'NONE', *, *, #34156, .T. ) ; +#29657 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29658 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#29659 = EDGE_CURVE ( 'NONE', #77608, #13752, #63890, .T. ) ; +#29660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29661 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 81.22294471194857100, -28.20555803803047800 ) ) ; +#29662 = FACE_OUTER_BOUND ( 'NONE', #5302, .T. ) ; +#29663 = ORIENTED_EDGE ( 'NONE', *, *, #16750, .T. ) ; +#29664 = AXIS2_PLACEMENT_3D ( 'NONE', #11979, #55469, #18225 ) ; +#29665 = CIRCLE ( 'NONE', #57551, 10.00000000000009200 ) ; +#29666 = EDGE_LOOP ( 'NONE', ( #367, #74895, #56315 ) ) ; +#29667 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 35.66666666666667900, -5.205558038030003100 ) ) ; +#29668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29669 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999957000, 71.62753447840813700, -28.38801640354866900 ) ) ; +#29670 = ORIENTED_EDGE ( 'NONE', *, *, #9981, .T. ) ; +#29671 = FACE_OUTER_BOUND ( 'NONE', #21583, .T. ) ; +#29672 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64970, #52675, #71455, #34203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367409818900, 0.0005556746457764249900 ), + .UNSPECIFIED. ) ; +#29673 = FACE_OUTER_BOUND ( 'NONE', #38735, .T. ) ; +#29674 = ORIENTED_EDGE ( 'NONE', *, *, #33169, .F. ) ; +#29675 = ORIENTED_EDGE ( 'NONE', *, *, #50075, .F. ) ; +#29676 = VERTEX_POINT ( 'NONE', #31406 ) ; +#29677 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#29678 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#29679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29680 = AXIS2_PLACEMENT_3D ( 'NONE', #65932, #22672, #10161 ) ; +#29681 = CARTESIAN_POINT ( 'NONE', ( -7.154569221745357600, 57.15000000000005500, -7.454033810091953400 ) ) ; +#29682 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537171500, 60.34267608797603800, -28.20555803802997700 ) ) ; +#29683 = EDGE_CURVE ( 'NONE', #43760, #24257, #62720, .T. ) ; +#29684 = EDGE_CURVE ( 'NONE', #33801, #56790, #49370, .T. ) ; +#29686 = FACE_OUTER_BOUND ( 'NONE', #80750, .T. ) ; +#29685 = AXIS2_PLACEMENT_3D ( 'NONE', #52737, #15501, #59007 ) ; +#29687 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999962700, 84.13556610137273100, -28.54207364681992200 ) ) ; +#29688 = ORIENTED_EDGE ( 'NONE', *, *, #59274, .T. ) ; +#29689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29690 = PLANE ( 'NONE', #7124 ) ; +#29691 = CONICAL_SURFACE ( 'NONE', #8045, 10.00000000000009200, 0.7853981633974447300 ) ; +#29692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29693 = ORIENTED_EDGE ( 'NONE', *, *, #74726, .F. ) ; +#29694 = EDGE_LOOP ( 'NONE', ( #74241, #42451, #23558 ) ) ; +#29695 = EDGE_LOOP ( 'NONE', ( #50975, #45861, #33189, #70846 ) ) ; +#29696 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999600, 4.999999999999999100, -19.78361106395306000 ) ) ; +#29697 = ORIENTED_EDGE ( 'NONE', *, *, #23450, .F. ) ; +#29698 = VERTEX_POINT ( 'NONE', #19408 ) ; +#29699 = AXIS2_PLACEMENT_3D ( 'NONE', #19835, #63364, #26106 ) ; +#29700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29701 = ORIENTED_EDGE ( 'NONE', *, *, #3593, .F. ) ; +#29702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29703 = EDGE_CURVE ( 'NONE', #54328, #58782, #34967, .T. ) ; +#29704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29705 = FACE_OUTER_BOUND ( 'NONE', #52492, .T. ) ; +#29706 = AXIS2_PLACEMENT_3D ( 'NONE', #38517, #7525, #32311 ) ; +#29707 = AXIS2_PLACEMENT_3D ( 'NONE', #8834, #77411, #64939 ) ; +#29708 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29709 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965677300, 17.92298334620755900, -28.20555803803042500 ) ) ; +#29710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23035, #41767, #60570, #23291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349220993100E-007, 0.0004318366892326774500 ), + .UNSPECIFIED. ) ; +#29711 = ADVANCED_FACE ( 'NONE', ( #46125 ), #42229, .T. ) ; +#29712 = ORIENTED_EDGE ( 'NONE', *, *, #55043, .T. ) ; +#29713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29714 = VERTEX_POINT ( 'NONE', #19695 ) ; +#29715 = CIRCLE ( 'NONE', #38199, 10.00000000000009200 ) ; +#29716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29717 = ADVANCED_FACE ( 'NONE', ( #29643 ), #9128, .F. ) ; +#29718 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 4.166666666666675000, 0.1341879241256129200 ) ) ; +#29719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29720 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29721 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 44.33333333333334300, 2.794441961969998300 ) ) ; +#29722 = AXIS2_PLACEMENT_3D ( 'NONE', #61450, #24171, #67686 ) ; +#29723 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29724 = CARTESIAN_POINT ( 'NONE', ( 10.93543899802699000, 61.50961459723726000, -28.29483879644672200 ) ) ; +#29725 = FACE_OUTER_BOUND ( 'NONE', #14580, .T. ) ; +#29726 = ADVANCED_FACE ( 'NONE', ( #58791 ), #56846, .T. ) ; +#29727 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274455300, 41.29377171558736800, -28.24172590004351200 ) ) ; +#29728 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29729 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 9.500000000000016000, -7.061964498581022400 ) ) ; +#29730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29731 = VERTEX_POINT ( 'NONE', #44638 ) ; +#29732 = ORIENTED_EDGE ( 'NONE', *, *, #75045, .F. ) ; +#29733 = CONICAL_SURFACE ( 'NONE', #74977, 10.50000000000009600, 0.7853981633974500600 ) ; +#29734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29735 = AXIS2_PLACEMENT_3D ( 'NONE', #56072, #12579, #74857 ) ; +#29736 = VERTEX_POINT ( 'NONE', #50914 ) ; +#29737 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510364300, 39.15930907398620100, -28.35186440610857500 ) ) ; +#29738 = ADVANCED_FACE ( 'NONE', ( #27685 ), #57209, .T. ) ; +#29739 = CARTESIAN_POINT ( 'NONE', ( -17.32934156052459700, 60.46865661974091200, -28.43089930266685900 ) ) ; +#29740 = EDGE_CURVE ( 'NONE', #37899, #48972, #75345, .T. ) ; +#29741 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29743 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29744 = FACE_OUTER_BOUND ( 'NONE', #26175, .T. ) ; +#29745 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.23796787468685200, -28.38801640354855100 ) ) ; +#29746 = CIRCLE ( 'NONE', #24678, 10.00000000000009200 ) ; +#29747 = AXIS2_PLACEMENT_3D ( 'NONE', #70265, #27053, #33286 ) ; +#29748 = ORIENTED_EDGE ( 'NONE', *, *, #44458, .T. ) ; +#29749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29750 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 30.40050506338822300, -28.70555803802996700 ) ) ; +#29751 = FACE_OUTER_BOUND ( 'NONE', #47801, .T. ) ; +#29752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29753 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29754 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63787, #20252, #70002, #32749 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674734030635400E-007, 0.0009376786059871171000 ), + .UNSPECIFIED. ) ; +#29755 = ORIENTED_EDGE ( 'NONE', *, *, #7936, .F. ) ; +#29756 = CARTESIAN_POINT ( 'NONE', ( -3.073496928715939700, 51.37839075872577900, -28.29547734244345100 ) ) ; +#29757 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279000, 39.35339758437808700, -28.20555803802995200 ) ) ; +#29759 = ORIENTED_EDGE ( 'NONE', *, *, #76373, .T. ) ; +#29758 = CARTESIAN_POINT ( 'NONE', ( 10.04026895850643800, 30.87561462481246700, -28.30309985153376200 ) ) ; +#29760 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#29761 = CARTESIAN_POINT ( 'NONE', ( -11.46986311119036400, 9.146957350529760300, -28.66910751791843700 ) ) ; +#29762 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900902100, 41.53732497909458500, -28.41043597897467900 ) ) ; +#29763 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29764 = FACE_OUTER_BOUND ( 'NONE', #24834, .T. ) ; +#29765 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515395000, 90.58127875436093700, -28.53757464917584100 ) ) ; +#29766 = CONICAL_SURFACE ( 'NONE', #43452, 10.00000000000009400, 0.7853981633974447300 ) ; +#29767 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29769 = CARTESIAN_POINT ( 'NONE', ( 10.93544426077530200, 70.09037803491472100, -28.29483400905908000 ) ) ; +#29770 = ORIENTED_EDGE ( 'NONE', *, *, #20849, .F. ) ; +#29771 = EDGE_CURVE ( 'NONE', #73466, #13691, #20490, .T. ) ; +#29772 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311236100, 75.80000000000261200, -28.70555803802997700 ) ) ; +#29773 = EDGE_LOOP ( 'NONE', ( #69681, #9197, #34097 ) ) ; +#29774 = ORIENTED_EDGE ( 'NONE', *, *, #34413, .F. ) ; +#29775 = EDGE_CURVE ( 'NONE', #25994, #38210, #2346, .T. ) ; +#29776 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274319200, 63.66464174796033900, -28.53896444442227000 ) ) ; +#29777 = VERTEX_POINT ( 'NONE', #51163 ) ; +#29778 = ORIENTED_EDGE ( 'NONE', *, *, #50881, .F. ) ; +#29779 = CARTESIAN_POINT ( 'NONE', ( 16.57127784838972300, 80.12774695439637200, -28.53061079109407300 ) ) ; +#29780 = ORIENTED_EDGE ( 'NONE', *, *, #24754, .F. ) ; +#29781 = CONICAL_SURFACE ( 'NONE', #40629, 10.00000000000009200, 0.7853981633974447300 ) ; +#29782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29783 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#29784 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#29785 = ORIENTED_EDGE ( 'NONE', *, *, #25578, .T. ) ; +#29786 = EDGE_LOOP ( 'NONE', ( #31986, #20651, #17496, #42324 ) ) ; +#29787 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#29788 = EDGE_CURVE ( 'NONE', #8064, #1355, #6029, .T. ) ; +#29789 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#29790 = EDGE_CURVE ( 'NONE', #72923, #25364, #25738, .T. ) ; +#29791 = ORIENTED_EDGE ( 'NONE', *, *, #78118, .F. ) ; +#29792 = CONICAL_SURFACE ( 'NONE', #17524, 10.00000000000009400, 0.7853981633974447300 ) ; +#29793 = AXIS2_PLACEMENT_3D ( 'NONE', #6351, #18859, #43582 ) ; +#29794 = ORIENTED_EDGE ( 'NONE', *, *, #36058, .F. ) ; +#29795 = CIRCLE ( 'NONE', #34558, 10.00000000000009600 ) ; +#29796 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999999600, 71.43250300240228500, -28.20555803802997700 ) ) ; +#29797 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 50.33333333333334300, -8.133761268305512700 ) ) ; +#29798 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29799 = AXIS2_PLACEMENT_3D ( 'NONE', #64595, #58309, #21065 ) ; +#29800 = EDGE_CURVE ( 'NONE', #79232, #58100, #60775, .T. ) ; +#29801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29802 = EDGE_CURVE ( 'NONE', #10148, #70364, #72374, .T. ) ; +#29803 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#29804 = EDGE_CURVE ( 'NONE', #19665, #45954, #73412, .T. ) ; +#29805 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.22294471194861400, -28.20555803802997700 ) ) ; +#29806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80350, #43072, #18341, #61875 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766079111198500E-007, 0.001119323292485724900 ), + .UNSPECIFIED. ) ; +#29807 = ADVANCED_FACE ( 'NONE', ( #23775 ), #5262, .F. ) ; +#29808 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29809 = AXIS2_PLACEMENT_3D ( 'NONE', #48218, #11003, #54507 ) ; +#29810 = CIRCLE ( 'NONE', #56357, 9.500000000000099500 ) ; +#29811 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39275, #76275, #45503, #8258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241065000, 0.0005195704752304443100 ), + .UNSPECIFIED. ) ; +#29813 = CIRCLE ( 'NONE', #19153, 10.00000000000009400 ) ; +#29814 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29815 = ORIENTED_EDGE ( 'NONE', *, *, #13044, .F. ) ; +#29816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13524, #63298, #32265, #75773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577276900 ), + .UNSPECIFIED. ) ; +#29817 = EDGE_CURVE ( 'NONE', #74485, #73096, #57878, .T. ) ; +#29818 = VERTEX_POINT ( 'NONE', #64566 ) ; +#29819 = FACE_OUTER_BOUND ( 'NONE', #9148, .T. ) ; +#29820 = ADVANCED_FACE ( 'NONE', ( #7187 ), #52928, .F. ) ; +#29821 = AXIS2_PLACEMENT_3D ( 'NONE', #11381, #11108, #54868 ) ; +#29822 = AXIS2_PLACEMENT_3D ( 'NONE', #20870, #39614, #76883 ) ; +#29823 = EDGE_LOOP ( 'NONE', ( #12047, #56395, #70013, #50051, #32773, #52096 ) ) ; +#29824 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027407100, 59.37488905616162100, -28.55192314908415700 ) ) ; +#29825 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29826 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#29827 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29828 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142900, 20.46868088498122200, -28.51286550264510900 ) ) ; +#29829 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 21.66666666666667900, 4.294441961969993400 ) ) ; +#29830 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61402, #11608, #49084, #11874 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794190131600E-007, 0.0009376791149930056400 ), + .UNSPECIFIED. ) ; +#29831 = PLANE ( 'NONE', #35421 ) ; +#29832 = CIRCLE ( 'NONE', #7215, 9.500000000000099500 ) ; +#29833 = FACE_OUTER_BOUND ( 'NONE', #608, .T. ) ; +#29834 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873289200, 61.70803673496183000, -28.29033182162391900 ) ) ; +#29835 = ORIENTED_EDGE ( 'NONE', *, *, #41754, .T. ) ; +#29836 = ADVANCED_FACE ( 'NONE', ( #21819 ), #19865, .T. ) ; +#29837 = CIRCLE ( 'NONE', #55184, 10.50000000000009600 ) ; +#29838 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972577900, 79.37488905616160700, -28.55192314908416400 ) ) ; +#29839 = VERTEX_POINT ( 'NONE', #8745 ) ; +#29840 = CARTESIAN_POINT ( 'NONE', ( 5.294162141782100800, 14.04999999999952300, -28.37136602294639700 ) ) ; +#29841 = VERTEX_POINT ( 'NONE', #52259 ) ; +#29842 = AXIS2_PLACEMENT_3D ( 'NONE', #72555, #35299, #78812 ) ; +#29843 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801593800, 70.90033558196090300, -28.70555803803014400 ) ) ; +#29844 = CONICAL_SURFACE ( 'NONE', #26926, 10.50000000000009600, 0.7853981633974518300 ) ; +#29845 = ADVANCED_FACE ( 'NONE', ( #3288 ), #67551, .F. ) ; +#29846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29847 = FACE_OUTER_BOUND ( 'NONE', #23759, .T. ) ; +#29848 = AXIS2_PLACEMENT_3D ( 'NONE', #28349, #71831, #34569 ) ; +#29849 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 82.31032580520964400, -28.59353418718925600 ) ) ; +#29850 = EDGE_LOOP ( 'NONE', ( #47403, #35377 ) ) ; +#29851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29852 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 56.16666666666667100, 0.1341879241256129200 ) ) ; +#29853 = ORIENTED_EDGE ( 'NONE', *, *, #63722, .T. ) ; +#29854 = CARTESIAN_POINT ( 'NONE', ( 17.77438981481022400, 4.451220370379621400, -27.04757241308045900 ) ) ; +#29855 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432841900, 39.35339758437810100, -28.20555803802995200 ) ) ; +#29856 = EDGE_CURVE ( 'NONE', #49715, #1060, #40285, .T. ) ; +#29857 = ORIENTED_EDGE ( 'NONE', *, *, #43431, .F. ) ; +#29858 = ORIENTED_EDGE ( 'NONE', *, *, #58142, .T. ) ; +#29859 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29860 = AXIS2_PLACEMENT_3D ( 'NONE', #61170, #23902, #67397 ) ; +#29861 = VERTEX_POINT ( 'NONE', #71052 ) ; +#29862 = CIRCLE ( 'NONE', #55265, 10.00000000000009400 ) ; +#29863 = CONICAL_SURFACE ( 'NONE', #14990, 10.00000000000009200, 0.7853981633974447300 ) ; +#29864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29865 = AXIS2_PLACEMENT_3D ( 'NONE', #38433, #7442, #7173 ) ; +#29867 = ORIENTED_EDGE ( 'NONE', *, *, #2355, .F. ) ; +#29866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29868 = CARTESIAN_POINT ( 'NONE', ( -2.602545352391261600, 50.73330895810819600, -28.60301268563892700 ) ) ; +#29869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68926, #62693, #68668, #31688 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459157214994000E-007, 0.0007679767755142057700 ), + .UNSPECIFIED. ) ; +#29870 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853321900, 17.80869142985021700, -28.37223374938530500 ) ) ; +#29871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29873 = FACE_OUTER_BOUND ( 'NONE', #28696, .T. ) ; +#29874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29875 = CARTESIAN_POINT ( 'NONE', ( 15.32706481948999200, 12.90566704911478400, -28.70129136469037700 ) ) ; +#29876 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29877 = AXIS2_PLACEMENT_3D ( 'NONE', #74860, #50049, #12861 ) ; +#29878 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993600, 15.22261628933212800, -28.70555803803042500 ) ) ; +#29879 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#29880 = ORIENTED_EDGE ( 'NONE', *, *, #61574, .F. ) ; +#29881 = CONICAL_SURFACE ( 'NONE', #22521, 10.50000000000009600, 0.7853981633974500600 ) ; +#29882 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.47246552159109000, -28.38801640354855500 ) ) ; +#29883 = CARTESIAN_POINT ( 'NONE', ( -16.56347606318351100, 9.244504305950300700, -28.58262190697336900 ) ) ; +#29884 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#29885 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29886 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29887 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 61.43945992495532900, -28.34042301926881200 ) ) ; +#29888 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000417400, 16.17143691309398100, -28.36981695106796400 ) ) ; +#29889 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217464600, 60.16054007504464400, -28.34042301926885400 ) ) ; +#29890 = ORIENTED_EDGE ( 'NONE', *, *, #10200, .F. ) ; +#29891 = EDGE_CURVE ( 'NONE', #10246, #54480, #71447, .T. ) ; +#29892 = CIRCLE ( 'NONE', #40152, 10.50000000000005200 ) ; +#29893 = ORIENTED_EDGE ( 'NONE', *, *, #68836, .T. ) ; +#29894 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29895 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 62.50000000000001400, -9.258116921287651700 ) ) ; +#29896 = EDGE_CURVE ( 'NONE', #49578, #18956, #54894, .T. ) ; +#29897 = FACE_OUTER_BOUND ( 'NONE', #69616, .T. ) ; +#29898 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29899 = EDGE_LOOP ( 'NONE', ( #231, #53712, #8625, #74220, #55769, #60503, #80793, #68923 ) ) ; +#29900 = CIRCLE ( 'NONE', #3471, 9.500000000000095900 ) ; +#29901 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 27.66666666666667100, 3.124568980892192800 ) ) ; +#29902 = CARTESIAN_POINT ( 'NONE', ( 3.242975574465664800, 70.16517473503377300, -28.29551658696716000 ) ) ; +#29903 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#29904 = EDGE_CURVE ( 'NONE', #24568, #56473, #43400, .T. ) ; +#29905 = ORIENTED_EDGE ( 'NONE', *, *, #75103, .T. ) ; +#29906 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29907 = EDGE_CURVE ( 'NONE', #51916, #49544, #29019, .T. ) ; +#29908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29909 = CIRCLE ( 'NONE', #46768, 9.500000000000097700 ) ; +#29910 = CIRCLE ( 'NONE', #585, 9.500000000000101300 ) ; +#29911 = EDGE_CURVE ( 'NONE', #27318, #80062, #36384, .T. ) ; +#29912 = ORIENTED_EDGE ( 'NONE', *, *, #45664, .T. ) ; +#29913 = EDGE_CURVE ( 'NONE', #15757, #21983, #69486, .T. ) ; +#29914 = CARTESIAN_POINT ( 'NONE', ( -6.215920804933190000, 44.45000000000015900, 4.027015801799260300 ) ) ; +#29915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29916 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 30.00000000000000700, -12.20555803803000200 ) ) ; +#29917 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566721500, 24.54999999999998600, -28.70555803802994200 ) ) ; +#29918 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 70.37705528805136600, -28.20555803802997700 ) ) ; +#29919 = ORIENTED_EDGE ( 'NONE', *, *, #79314, .F. ) ; +#29920 = AXIS2_PLACEMENT_3D ( 'NONE', #75721, #38444, #1202 ) ; +#29921 = EDGE_CURVE ( 'NONE', #9646, #76201, #14493, .T. ) ; +#29922 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310457600, 28.60230989102909800, -28.61774594594333400 ) ) ; +#29923 = EDGE_CURVE ( 'NONE', #31387, #46424, #38318, .T. ) ; +#29924 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145289000, 69.73198281203404700, -28.34169759783695900 ) ) ; +#29925 = EDGE_CURVE ( 'NONE', #55930, #78730, #17910, .T. ) ; +#29926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29927 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29928 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32030, #68749, #44482, #7247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185221817096700E-007, 0.0006654852833079579900 ), + .UNSPECIFIED. ) ; +#29929 = CARTESIAN_POINT ( 'NONE', ( 18.39682330472223600, 8.302215187517408200, -28.12667337200758400 ) ) ; +#29930 = CIRCLE ( 'NONE', #66842, 10.50000000000009800 ) ; +#29931 = ORIENTED_EDGE ( 'NONE', *, *, #18537, .T. ) ; +#29932 = AXIS2_PLACEMENT_3D ( 'NONE', #59183, #17062, #4537 ) ; +#29933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29934 = ORIENTED_EDGE ( 'NONE', *, *, #66874, .T. ) ; +#29935 = EDGE_LOOP ( 'NONE', ( #74670, #36435, #39157, #39095 ) ) ; +#29936 = VERTEX_POINT ( 'NONE', #3578 ) ; +#29937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#29938 = CARTESIAN_POINT ( 'NONE', ( 18.02603693166085100, 97.65221876151864000, -26.66838406074337400 ) ) ; +#29939 = ADVANCED_FACE ( 'NONE', ( #1335 ), #80193, .F. ) ; +#29940 = CONICAL_SURFACE ( 'NONE', #14061, 10.00000000000009200, 0.7853981633974447300 ) ; +#29941 = AXIS2_PLACEMENT_3D ( 'NONE', #26751, #70234, #32978 ) ; +#29942 = AXIS2_PLACEMENT_3D ( 'NONE', #34490, #77995, #40712 ) ; +#29943 = EDGE_LOOP ( 'NONE', ( #25305, #18996, #37985 ) ) ; +#29944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22998, #10488, #72777, #35519 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476258133704500E-007, 0.0002670039420925205600 ), + .UNSPECIFIED. ) ; +#29946 = ADVANCED_FACE ( 'NONE', ( #34465 ), #47061, .T. ) ; +#29947 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042460800, 27.50972971738994500, -28.70555803802994500 ) ) ; +#29948 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374510200, 29.54361721375111900, -28.44857805373787600 ) ) ; +#29949 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.03751622186548800, -28.32723995587591400 ) ) ; +#29950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29951 = CONICAL_SURFACE ( 'NONE', #10119, 10.50000000000009800, 0.7853981633974518300 ) ; +#29952 = ORIENTED_EDGE ( 'NONE', *, *, #45167, .F. ) ; +#29953 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 33.50000000000001400, 4.650848422521012700 ) ) ; +#29954 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#29955 = VERTEX_POINT ( 'NONE', #16386 ) ; +#29956 = FACE_OUTER_BOUND ( 'NONE', #66363, .T. ) ; +#29957 = CYLINDRICAL_SURFACE ( 'NONE', #74632, 10.00000000000000200 ) ; +#29958 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 20.67701665379184600, -28.20555803802994200 ) ) ; +#29959 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#29960 = AXIS2_PLACEMENT_3D ( 'NONE', #14815, #58334, #21094 ) ; +#29961 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171911600, 81.13768531620290500, -28.37082013777851900 ) ) ; +#29962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29963 = CARTESIAN_POINT ( 'NONE', ( 0.3412432945800641900, 57.15000000000000600, -10.58691269041301000 ) ) ; +#29964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31783, #19254, #75289, #38007 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838145208344700E-007, 0.0004559721418115614800 ), + .UNSPECIFIED. ) ; +#29965 = EDGE_LOOP ( 'NONE', ( #66891, #45607, #47795 ) ) ; +#29966 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506624600, 18.08087956867518600, -28.30223257055593000 ) ) ; +#29967 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#29968 = CIRCLE ( 'NONE', #36456, 10.00000000000009400 ) ; +#29969 = ORIENTED_EDGE ( 'NONE', *, *, #41561, .T. ) ; +#29970 = EDGE_CURVE ( 'NONE', #13816, #39312, #65612, .T. ) ; +#29971 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 70.07141756547891000, -28.70555803802997700 ) ) ; +#29972 = AXIS2_PLACEMENT_3D ( 'NONE', #56349, #13146, #37847 ) ; +#29973 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#29974 = ORIENTED_EDGE ( 'NONE', *, *, #5750, .F. ) ; +#29975 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#29976 = FACE_OUTER_BOUND ( 'NONE', #13381, .T. ) ; +#29977 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019385200, 86.79999999999783700, -28.70555803802997700 ) ) ; +#29978 = ORIENTED_EDGE ( 'NONE', *, *, #70991, .T. ) ; +#29979 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#29980 = AXIS2_PLACEMENT_3D ( 'NONE', #45019, #63861, #32821 ) ; +#29981 = CONICAL_SURFACE ( 'NONE', #43211, 10.50000000000009600, 0.7853981633974500600 ) ; +#29982 = VERTEX_POINT ( 'NONE', #22638 ) ; +#29983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29984 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390573200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#29985 = ORIENTED_EDGE ( 'NONE', *, *, #43069, .T. ) ; +#29986 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 2.000000000000008400, -1.205558038030002800 ) ) ; +#29987 = AXIS2_PLACEMENT_3D ( 'NONE', #1961, #45449, #8204 ) ; +#29988 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 71.52858243452105600, -28.70555803802997700 ) ) ; +#29989 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69661, #26177, #38625, #1382 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258831152200, 0.0009376791149930110600 ), + .UNSPECIFIED. ) ; +#29990 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 67.22261628933269200, -28.70555803802997700 ) ) ; +#29991 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 42.16666666666665000, -3.349151577478988200 ) ) ; +#29992 = CONICAL_SURFACE ( 'NONE', #75958, 10.00000000000009200, 0.7853981633974447300 ) ; +#29993 = CONICAL_SURFACE ( 'NONE', #21458, 10.00000000000009200, 0.7853981633974447300 ) ; +#29994 = ORIENTED_EDGE ( 'NONE', *, *, #22114, .T. ) ; +#29995 = ORIENTED_EDGE ( 'NONE', *, *, #33393, .F. ) ; +#29996 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#29997 = EDGE_CURVE ( 'NONE', #23135, #43518, #18, .T. ) ; +#29998 = ORIENTED_EDGE ( 'NONE', *, *, #68807, .F. ) ; +#29999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30000 = EDGE_LOOP ( 'NONE', ( #59898, #3950, #53733, #33707 ) ) ; +#30001 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ; +#30002 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 7.333333333333344600, 2.794441961969998300 ) ) ; +#30003 = ORIENTED_EDGE ( 'NONE', *, *, #52611, .T. ) ; +#30004 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30006 = PLANE ( 'NONE', #41241 ) ; +#30007 = VERTEX_POINT ( 'NONE', #53893 ) ; +#30008 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472979800, 49.63131911501867000, -28.51286550264550400 ) ) ; +#30009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30010 = ADVANCED_FACE ( 'NONE', ( #63663 ), #78246, .F. ) ; +#30011 = CARTESIAN_POINT ( 'NONE', ( 15.86238361814056800, 38.92067263347056600, -28.67075088557350400 ) ) ; +#30012 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 30.96868088498121800, -28.51286550264512000 ) ) ; +#30013 = VERTEX_POINT ( 'NONE', #66427 ) ; +#30014 = CONICAL_SURFACE ( 'NONE', #69405, 10.50000000000009200, 0.7853981633974482800 ) ; +#30015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30016 = EDGE_CURVE ( 'NONE', #67056, #31899, #50959, .T. ) ; +#30018 = EDGE_CURVE ( 'NONE', #5279, #60447, #15958, .T. ) ; +#30017 = ORIENTED_EDGE ( 'NONE', *, *, #46750, .T. ) ; +#30019 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404300, 28.42298334620739900, -28.20555803802994500 ) ) ; +#30020 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30021 = VERTEX_POINT ( 'NONE', #41646 ) ; +#30022 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181928500, 59.94924284854760500, -28.20555803803014400 ) ) ; +#30023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30024 = PLANE ( 'NONE', #61546 ) ; +#30025 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30026 = CONICAL_SURFACE ( 'NONE', #4204, 10.50000000000009600, 0.7853981633974518300 ) ; +#30027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30028 = ADVANCED_FACE ( 'NONE', ( #49003 ), #12068, .T. ) ; +#30029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30030 = AXIS2_PLACEMENT_3D ( 'NONE', #79037, #54523, #17272 ) ; +#30031 = EDGE_CURVE ( 'NONE', #28926, #67971, #28652, .T. ) ; +#30032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24383, #67893, #43120, #5887 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191438789900E-007, 0.0006649560044144012100 ), + .UNSPECIFIED. ) ; +#30033 = EDGE_CURVE ( 'NONE', #17621, #7904, #30578, .T. ) ; +#30034 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30035 = EDGE_CURVE ( 'NONE', #6237, #20639, #32498, .T. ) ; +#30036 = VERTEX_POINT ( 'NONE', #35941 ) ; +#30037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30038 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 63.65857157145661200, -28.20555803803030800 ) ) ; +#30039 = EDGE_CURVE ( 'NONE', #4991, #45068, #45085, .T. ) ; +#30040 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818954800, 89.94924284854707300, -28.20555803802997700 ) ) ; +#30041 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30042 = AXIS2_PLACEMENT_3D ( 'NONE', #9806, #16061, #34570 ) ; +#30043 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#30044 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 75.79999999999999700, -28.63843632546336000 ) ) ; +#30045 = CYLINDRICAL_SURFACE ( 'NONE', #53636, 10.00000000000000000 ) ; +#30046 = ORIENTED_EDGE ( 'NONE', *, *, #48428, .F. ) ; +#30047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63378, #7565, #26389, #69863 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.006877718201233487900, 0.007562530538922908500 ), + .UNSPECIFIED. ) ; +#30048 = ORIENTED_EDGE ( 'NONE', *, *, #10799, .T. ) ; +#30049 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507556700, 19.89456479767167400, -28.70555803802994200 ) ) ; +#30050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30051 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185600, 30.96868088498122200, -28.51286550264512000 ) ) ; +#30052 = AXIS2_PLACEMENT_3D ( 'NONE', #23093, #66338, #60369 ) ; +#30053 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#30054 = AXIS2_PLACEMENT_3D ( 'NONE', #59247, #40743, #77739 ) ; +#30055 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30056 = ADVANCED_FACE ( 'NONE', ( #59758 ), #57791, .F. ) ; +#30057 = CYLINDRICAL_SURFACE ( 'NONE', #46279, 10.00000000000000000 ) ; +#30058 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528182800, 28.63131911501876900, -28.51286550264508100 ) ) ; +#30059 = ORIENTED_EDGE ( 'NONE', *, *, #20709, .T. ) ; +#30060 = ORIENTED_EDGE ( 'NONE', *, *, #11594, .T. ) ; +#30061 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 48.16666666666665700, 6.794441961969992500 ) ) ; +#30062 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454055000, 79.08026449164297800, -28.70555803803030800 ) ) ; +#30063 = AXIS2_PLACEMENT_3D ( 'NONE', #31881, #75389, #38096 ) ; +#30064 = EDGE_CURVE ( 'NONE', #68043, #33227, #10111, .T. ) ; +#30065 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471819800, 39.13131911501876200, -28.51286550264509100 ) ) ; +#30066 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851405000, 46.50238095238082500, -28.70555803802996700 ) ) ; +#30067 = CARTESIAN_POINT ( 'NONE', ( -15.07025710783655000, 9.859485784326885500, -28.70457077705549100 ) ) ; +#30068 = FACE_OUTER_BOUND ( 'NONE', #43545, .T. ) ; +#30069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30070 = CONICAL_SURFACE ( 'NONE', #9388, 10.00000000000009200, 0.7853981633974447300 ) ; +#30071 = EDGE_LOOP ( 'NONE', ( #5426, #6371, #42286, #70768 ) ) ; +#30072 = VERTEX_POINT ( 'NONE', #36210 ) ; +#30073 = EDGE_LOOP ( 'NONE', ( #22653, #62062, #7212 ) ) ; +#30074 = EDGE_CURVE ( 'NONE', #69213, #37317, #66377, .T. ) ; +#30075 = CONICAL_SURFACE ( 'NONE', #39756, 10.50000000000009600, 0.7853981633974500600 ) ; +#30076 = ORIENTED_EDGE ( 'NONE', *, *, #4525, .T. ) ; +#30077 = ORIENTED_EDGE ( 'NONE', *, *, #12836, .T. ) ; +#30078 = AXIS2_PLACEMENT_3D ( 'NONE', #59956, #22684, #66213 ) ; +#30079 = EDGE_LOOP ( 'NONE', ( #62760, #45661, #76772, #1776 ) ) ; +#30080 = VERTEX_POINT ( 'NONE', #54960 ) ; +#30081 = ORIENTED_EDGE ( 'NONE', *, *, #15208, .F. ) ; +#30082 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 82.31032580521097900, -28.59353418718932400 ) ) ; +#30083 = ORIENTED_EDGE ( 'NONE', *, *, #4624, .T. ) ; +#30084 = VERTEX_POINT ( 'NONE', #73475 ) ; +#30085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#30086 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55351, #80403, #43114, #5880 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207941517400E-007, 0.0008724366121409659300 ), + .UNSPECIFIED. ) ; +#30087 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, -49.81214711292819400, 0.0000000000000000000 ) ) ; +#30088 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30089 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 19.49999999999999300, -9.258116921287651700 ) ) ; +#30090 = CARTESIAN_POINT ( 'NONE', ( -17.24306493325783400, 71.43482203710631500, -28.29548531138973600 ) ) ; +#30091 = CIRCLE ( 'NONE', #22482, 10.00000000000009200 ) ; +#30092 = AXIS2_PLACEMENT_3D ( 'NONE', #62814, #25560, #69043 ) ; +#30093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30094 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507540700, 39.70543520232828200, -28.70555803802995200 ) ) ; +#30095 = EDGE_LOOP ( 'NONE', ( #12725, #42012, #71657, #38227 ) ) ; +#30096 = ORIENTED_EDGE ( 'NONE', *, *, #6850, .T. ) ; +#30097 = ORIENTED_EDGE ( 'NONE', *, *, #31058, .F. ) ; +#30098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30099 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703000, 46.48096581827313400, -28.69431509262337300 ) ) ; +#30100 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 61.25732391202397800, -28.20555803802997700 ) ) ; +#30101 = CIRCLE ( 'NONE', #60473, 10.00000000000009200 ) ; +#30102 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804090100, 53.65857157145661900, -28.37229765499311200 ) ) ; +#30103 = AXIS2_PLACEMENT_3D ( 'NONE', #54878, #17644, #79646 ) ; +#30104 = ORIENTED_EDGE ( 'NONE', *, *, #7815, .T. ) ; +#30105 = ORIENTED_EDGE ( 'NONE', *, *, #52123, .T. ) ; +#30106 = ADVANCED_FACE ( 'NONE', ( #74357 ), #8113, .F. ) ; +#30107 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30110 = EDGE_CURVE ( 'NONE', #2940, #58778, #24703, .T. ) ; +#30111 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 54.00000000000001400, -1.205558038030002800 ) ) ; +#30112 = CONICAL_SURFACE ( 'NONE', #58272, 10.00000000000009600, 0.7853981633974447300 ) ; +#30113 = CARTESIAN_POINT ( 'NONE', ( 15.71193568073201900, 9.288064319267986600, -28.68299730642570500 ) ) ; +#30114 = EDGE_LOOP ( 'NONE', ( #42494, #20845, #7021, #44628 ) ) ; +#30115 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30116 = ORIENTED_EDGE ( 'NONE', *, *, #45664, .F. ) ; +#30117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30118 = PLANE ( 'NONE', #75320 ) ; +#30119 = ADVANCED_FACE ( 'NONE', ( #43169 ), #39274, .T. ) ; +#30120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74914, #6629, #630, #44116 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882747861500E-007, 0.0004435496461727883500 ), + .UNSPECIFIED. ) ; +#30121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30124 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857115300, 36.92318720225497900, -28.70555803802995200 ) ) ; +#30125 = EDGE_CURVE ( 'NONE', #31933, #72943, #51847, .T. ) ; +#30126 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30127 = CONICAL_SURFACE ( 'NONE', #48329, 10.50000000000009600, 0.7853981633974518300 ) ; +#30128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30129 = ADVANCED_FACE ( 'NONE', ( #72411 ), #6199, .T. ) ; +#30130 = FACE_OUTER_BOUND ( 'NONE', #73669, .T. ) ; +#30132 = EDGE_CURVE ( 'NONE', #46326, #80208, #37403, .T. ) ; +#30131 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66614, #16581, #79131, #41838 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941559900, 0.001517194977238254400 ), + .UNSPECIFIED. ) ; +#30133 = ORIENTED_EDGE ( 'NONE', *, *, #41286, .T. ) ; +#30134 = ORIENTED_EDGE ( 'NONE', *, *, #14158, .F. ) ; +#30135 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.418457393421045200, -28.68863412692832800 ) ) ; +#30136 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122141900, 30.52667319908792400, -28.37233769390154600 ) ) ; +#30137 = AXIS2_PLACEMENT_3D ( 'NONE', #73194, #48128, #54405 ) ; +#30138 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019100, 81.43250300240214300, -28.20555803803014400 ) ) ; +#30139 = ORIENTED_EDGE ( 'NONE', *, *, #19959, .T. ) ; +#30140 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972592500, 52.22511094383835900, -28.55192314908414600 ) ) ; +#30141 = EDGE_CURVE ( 'NONE', #48875, #74940, #76273, .T. ) ; +#30142 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019100, 81.43250300240214300, -28.20555803803014400 ) ) ; +#30143 = ADVANCED_FACE ( 'NONE', ( #41234 ), #37308, .T. ) ; +#30144 = FACE_OUTER_BOUND ( 'NONE', #4839, .T. ) ; +#30146 = EDGE_LOOP ( 'NONE', ( #13395, #57660, #2977 ) ) ; +#30145 = EDGE_CURVE ( 'NONE', #56481, #73637, #22981, .T. ) ; +#30147 = CIRCLE ( 'NONE', #18236, 10.00000000000009400 ) ; +#30148 = EDGE_LOOP ( 'NONE', ( #15701, #52480, #13558, #2288, #71350 ) ) ; +#30149 = AXIS2_PLACEMENT_3D ( 'NONE', #37642, #43890, #74944 ) ; +#30150 = EDGE_LOOP ( 'NONE', ( #44944, #41507, #48848, #69300, #31056 ) ) ; +#30151 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715031500, 9.820334718100600200, -28.30868034705253300 ) ) ; +#30152 = ORIENTED_EDGE ( 'NONE', *, *, #25588, .T. ) ; +#30153 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 60.33333333333333600, 4.294441961970000500 ) ) ; +#30154 = CIRCLE ( 'NONE', #65317, 9.500000000000097700 ) ; +#30155 = VERTEX_POINT ( 'NONE', #37251 ) ; +#30156 = ORIENTED_EDGE ( 'NONE', *, *, #57378, .T. ) ; +#30157 = ORIENTED_EDGE ( 'NONE', *, *, #79801, .T. ) ; +#30158 = ORIENTED_EDGE ( 'NONE', *, *, #42827, .F. ) ; +#30159 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 25.50000000000000700, -4.865812075874393000 ) ) ; +#30160 = VERTEX_POINT ( 'NONE', #68283 ) ; +#30161 = AXIS2_PLACEMENT_3D ( 'NONE', #20093, #63617, #26362 ) ; +#30162 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#30163 = EDGE_CURVE ( 'NONE', #8255, #62561, #8473, .T. ) ; +#30164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76358, #38805, #45315, #8075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003593416339764630200, 0.0005041857630952000800 ), + .UNSPECIFIED. ) ; +#30165 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 70.34267608797598800, -28.20555803802997700 ) ) ; +#30166 = EDGE_CURVE ( 'NONE', #16023, #33166, #74831, .T. ) ; +#30167 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 19.90050506338822300, -28.70555803802995200 ) ) ; +#30168 = AXIS2_PLACEMENT_3D ( 'NONE', #12658, #56142, #18889 ) ; +#30169 = ORIENTED_EDGE ( 'NONE', *, *, #8478, .F. ) ; +#30170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30171 = FACE_OUTER_BOUND ( 'NONE', #55290, .T. ) ; +#30172 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#30173 = ORIENTED_EDGE ( 'NONE', *, *, #5384, .T. ) ; +#30174 = CARTESIAN_POINT ( 'NONE', ( 16.23149205479541400, 50.61317271699884700, -28.63166651360934600 ) ) ; +#30175 = EDGE_LOOP ( 'NONE', ( #57126, #50526, #71159 ) ) ; +#30176 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 27.83333333333333200, 9.794441961969999600 ) ) ; +#30177 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 64.37738371066728900, -28.70555803802997700 ) ) ; +#30178 = VERTEX_POINT ( 'NONE', #50013 ) ; +#30179 = ORIENTED_EDGE ( 'NONE', *, *, #4089, .T. ) ; +#30180 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762100, 42.02620220503713700, -28.70555803802996700 ) ) ; +#30181 = FACE_OUTER_BOUND ( 'NONE', #56704, .T. ) ; +#30182 = EDGE_CURVE ( 'NONE', #39861, #51665, #60399, .T. ) ; +#30183 = AXIS2_PLACEMENT_3D ( 'NONE', #11521, #79780, #54736 ) ; +#30184 = ORIENTED_EDGE ( 'NONE', *, *, #56678, .F. ) ; +#30185 = AXIS2_PLACEMENT_3D ( 'NONE', #70619, #46115, #8846 ) ; +#30186 = CARTESIAN_POINT ( 'NONE', ( -5.701915530455576000, 9.866352599407887800, -28.70555803803002000 ) ) ; +#30187 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30188 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985164700, 44.59761904761935400, -28.70555803802996700 ) ) ; +#30190 = ORIENTED_EDGE ( 'NONE', *, *, #50537, .F. ) ; +#30189 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#30191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18703, #12456, #55950, #62234 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711464381900E-007, 0.0008482615949374392700 ), + .UNSPECIFIED. ) ; +#30192 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30193 = CARTESIAN_POINT ( 'NONE', ( -10.95972934556082900, 39.22438272935921300, -28.30310183417008200 ) ) ; +#30194 = CONICAL_SURFACE ( 'NONE', #62949, 10.50000000000009600, 0.7853981633974500600 ) ; +#30195 = EDGE_LOOP ( 'NONE', ( #11321, #71413, #13366 ) ) ; +#30196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30197 = VERTEX_POINT ( 'NONE', #56292 ) ; +#30198 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 51.46283204837339300, -28.48697406221667100 ) ) ; +#30199 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30200 = VERTEX_POINT ( 'NONE', #31575 ) ; +#30201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30202 = ADVANCED_FACE ( 'NONE', ( #26666 ), #4237, .T. ) ; +#30203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30204 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492444600, 50.20543520232830300, -28.70555803802996700 ) ) ; +#30205 = PLANE ( 'NONE', #72930 ) ; +#30206 = AXIS2_PLACEMENT_3D ( 'NONE', #45203, #1707, #32735 ) ; +#30207 = CIRCLE ( 'NONE', #67787, 9.500000000000101300 ) ; +#30208 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 31.33333333333333900, -8.133761268305512700 ) ) ; +#30209 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#30210 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459577100, 59.08026449164340500, -28.70555803802997400 ) ) ; +#30211 = CONICAL_SURFACE ( 'NONE', #65559, 10.00000000000009400, 0.7853981633974447300 ) ; +#30212 = VERTEX_POINT ( 'NONE', #531 ) ; +#30213 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42689, #11983, #55483, #18238 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697166273400E-007, 0.0008724363063897039500 ), + .UNSPECIFIED. ) ; +#30214 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30215 = ADVANCED_FACE ( 'NONE', ( #68484 ), #51890, .T. ) ; +#30216 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.69949493661175700, -28.70555803802997700 ) ) ; +#30217 = AXIS2_PLACEMENT_3D ( 'NONE', #72519, #10224, #33357 ) ; +#30218 = CARTESIAN_POINT ( 'NONE', ( 7.094724871874501700, 57.15000000000000600, -6.502186567628166700 ) ) ; +#30219 = EDGE_CURVE ( 'NONE', #2942, #55937, #45874, .T. ) ; +#30220 = CIRCLE ( 'NONE', #25837, 9.500000000000097700 ) ; +#30221 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30222 = VERTEX_POINT ( 'NONE', #50284 ) ; +#30223 = VERTEX_POINT ( 'NONE', #75342 ) ; +#30224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30225 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180800000, 51.65075715145310700, -28.20555803802997700 ) ) ; +#30226 = AXIS2_PLACEMENT_3D ( 'NONE', #10184, #4184, #22695 ) ; +#30227 = CARTESIAN_POINT ( 'NONE', ( 10.77884208558799300, 9.935236322205886600, -28.30315276798573600 ) ) ; +#30228 = ADVANCED_FACE ( 'NONE', ( #55820 ), #18841, .F. ) ; +#30229 = FACE_OUTER_BOUND ( 'NONE', #19815, .T. ) ; +#30230 = ORIENTED_EDGE ( 'NONE', *, *, #21116, .F. ) ; +#30231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30232 = VERTEX_POINT ( 'NONE', #13351 ) ; +#30233 = EDGE_LOOP ( 'NONE', ( #49019, #51766, #56484, #57599, #707 ) ) ; +#30234 = ORIENTED_EDGE ( 'NONE', *, *, #23946, .F. ) ; +#30235 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873543700, 47.92044679784051200, -28.64059091698903400 ) ) ; +#30236 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .F. ) ; +#30237 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#30238 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#30239 = ADVANCED_FACE ( 'NONE', ( #20802 ), #61717, .T. ) ; +#30240 = CIRCLE ( 'NONE', #66688, 10.50000000000009600 ) ; +#30241 = ORIENTED_EDGE ( 'NONE', *, *, #36544, .T. ) ; +#30243 = EDGE_CURVE ( 'NONE', #12827, #74733, #31470, .T. ) ; +#30242 = ORIENTED_EDGE ( 'NONE', *, *, #70954, .T. ) ; +#30244 = VERTEX_POINT ( 'NONE', #44539 ) ; +#30245 = VERTEX_POINT ( 'NONE', #7320 ) ; +#30246 = EDGE_CURVE ( 'NONE', #14113, #40106, #53881, .T. ) ; +#30247 = EDGE_LOOP ( 'NONE', ( #6175, #21171, #32525, #56147 ) ) ; +#30248 = ORIENTED_EDGE ( 'NONE', *, *, #68357, .F. ) ; +#30249 = CIRCLE ( 'NONE', #22780, 10.50000000000009800 ) ; +#30250 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, -0.1666666666666588000, -2.545304000185615800 ) ) ; +#30251 = ORIENTED_EDGE ( 'NONE', *, *, #31212, .T. ) ; +#30252 = CARTESIAN_POINT ( 'NONE', ( -5.727308459283265500, 85.79999999999998300, -28.53979898350160100 ) ) ; +#30253 = EDGE_CURVE ( 'NONE', #51542, #76544, #35420, .T. ) ; +#30254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57911, #64199, #33157, #76657 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904677865800E-007, 0.0006651184466334838000 ), + .UNSPECIFIED. ) ; +#30255 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30256 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 40.00000000000000700, -1.205558038030005300 ) ) ; +#30257 = EDGE_CURVE ( 'NONE', #24063, #44409, #70416, .T. ) ; +#30258 = AXIS2_PLACEMENT_3D ( 'NONE', #53271, #28307, #16025 ) ; +#30259 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#30260 = CARTESIAN_POINT ( 'NONE', ( -17.07349184251535900, 80.22161678501183200, -28.29547179040443400 ) ) ; +#30261 = FACE_OUTER_BOUND ( 'NONE', #11539, .T. ) ; +#30262 = ORIENTED_EDGE ( 'NONE', *, *, #53814, .T. ) ; +#30263 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30264 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 5.166666666666690900, -3.349151577478988200 ) ) ; +#30265 = VERTEX_POINT ( 'NONE', #7579 ) ; +#30266 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 80.34267608797570400, -28.20555803802997700 ) ) ; +#30267 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387502600, 66.46717019299428800, -28.53914313452786500 ) ) ; +#30268 = AXIS2_PLACEMENT_3D ( 'NONE', #73405, #5114, #67145 ) ; +#30269 = EDGE_CURVE ( 'NONE', #24052, #15269, #16988, .T. ) ; +#30270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30271 = EDGE_CURVE ( 'NONE', #5323, #852, #49938, .T. ) ; +#30272 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846544800, 30.10079448659600500, -28.70555803802995200 ) ) ; +#30273 = EDGE_CURVE ( 'NONE', #38201, #7287, #2491, .T. ) ; +#30274 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145274100, 61.86801718796614600, -28.34169759783707900 ) ) ; +#30275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30277 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386300, 49.66349705304866500, -28.30782889147481600 ) ) ; +#30278 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#30279 = AXIS2_PLACEMENT_3D ( 'NONE', #63163, #25897, #69385 ) ; +#30280 = CONICAL_SURFACE ( 'NONE', #18227, 10.00000000000009400, 0.7853981633974447300 ) ; +#30281 = VERTEX_POINT ( 'NONE', #38853 ) ; +#30282 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909800, 84.83849307182683200, -28.68631150211663100 ) ) ; +#30283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30284 = VERTEX_POINT ( 'NONE', #63928 ) ; +#30285 = AXIS2_PLACEMENT_3D ( 'NONE', #65340, #28071, #71557 ) ; +#30286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30287 = VERTEX_POINT ( 'NONE', #26664 ) ; +#30288 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#30289 = EDGE_CURVE ( 'NONE', #53406, #61659, #68842, .T. ) ; +#30290 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#30291 = AXIS2_PLACEMENT_3D ( 'NONE', #28104, #71605, #34341 ) ; +#30292 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 60.69966441803890000, -28.70555803802997700 ) ) ; +#30293 = AXIS2_PLACEMENT_3D ( 'NONE', #47067, #59635, #40848 ) ; +#30294 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 61.43945992495532900, -28.34042301926881200 ) ) ; +#30295 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30296 = CARTESIAN_POINT ( 'NONE', ( -1.272691540716737600, 65.79999999999982700, -28.53979898350175400 ) ) ; +#30297 = CONICAL_SURFACE ( 'NONE', #44467, 10.00000000000009400, 0.7853981633974447300 ) ; +#30298 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#30299 = ORIENTED_EDGE ( 'NONE', *, *, #52344, .F. ) ; +#30300 = CARTESIAN_POINT ( 'NONE', ( -8.899882735204309700, 45.54999999999999700, -28.53808257741934200 ) ) ; +#30301 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455573200, 81.87833896172676900, -28.53892303408235900 ) ) ; +#30302 = EDGE_LOOP ( 'NONE', ( #75934, #256, #61050 ) ) ; +#30303 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#30304 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 4.999999999999997300, 16.29444196196997700 ) ) ; +#30305 = ORIENTED_EDGE ( 'NONE', *, *, #60497, .T. ) ; +#30306 = FACE_OUTER_BOUND ( 'NONE', #53635, .T. ) ; +#30307 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454054400, 89.08026449164296400, -28.70555803803030800 ) ) ; +#30308 = ORIENTED_EDGE ( 'NONE', *, *, #50424, .F. ) ; +#30310 = ORIENTED_EDGE ( 'NONE', *, *, #7815, .F. ) ; +#30309 = CARTESIAN_POINT ( 'NONE', ( -16.42208926844541500, 49.61339344823292000, -28.58282679407406900 ) ) ; +#30311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2741, #71310, #9279, #52801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199232300, 0.005783220423748065700 ), + .UNSPECIFIED. ) ; +#30312 = ORIENTED_EDGE ( 'NONE', *, *, #29113, .T. ) ; +#30313 = VERTEX_POINT ( 'NONE', #32885 ) ; +#30314 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 59.63176086632793700, -28.70555803802997700 ) ) ; +#30315 = ORIENTED_EDGE ( 'NONE', *, *, #76111, .T. ) ; +#30316 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 35.98096581827316200, -28.69431509262337300 ) ) ; +#30317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30319 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30320 = AXIS2_PLACEMENT_3D ( 'NONE', #74131, #61888, #12105 ) ; +#30321 = CIRCLE ( 'NONE', #7202, 10.50000000000009600 ) ; +#30322 = ORIENTED_EDGE ( 'NONE', *, *, #52015, .F. ) ; +#30323 = VERTEX_POINT ( 'NONE', #8110 ) ; +#30324 = ORIENTED_EDGE ( 'NONE', *, *, #14998, .T. ) ; +#30325 = ADVANCED_FACE ( 'NONE', ( #2269 ), #31503, .F. ) ; +#30326 = ORIENTED_EDGE ( 'NONE', *, *, #70118, .T. ) ; +#30327 = ORIENTED_EDGE ( 'NONE', *, *, #33185, .F. ) ; +#30328 = ORIENTED_EDGE ( 'NONE', *, *, #5085, .F. ) ; +#30329 = ORIENTED_EDGE ( 'NONE', *, *, #62385, .T. ) ; +#30330 = ADVANCED_FACE ( 'NONE', ( #16905 ), #79193, .T. ) ; +#30331 = CIRCLE ( 'NONE', #48229, 9.500000000000097700 ) ; +#30332 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 46.00000000000001400, -9.205558038030005700 ) ) ; +#30333 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30334 = AXIS2_PLACEMENT_3D ( 'NONE', #71064, #77322, #27573 ) ; +#30335 = CARTESIAN_POINT ( 'NONE', ( 17.37141821671398000, 70.16749699759719800, -28.25056166218057600 ) ) ; +#30336 = CARTESIAN_POINT ( 'NONE', ( -16.64092020120228500, 50.78321816207086700, -28.56462688657373100 ) ) ; +#30337 = CARTESIAN_POINT ( 'NONE', ( 16.42212147479897100, 30.98660297389273000, -28.58281552185033200 ) ) ; +#30338 = ADVANCED_FACE ( 'NONE', ( #64610 ), #46052, .T. ) ; +#30339 = EDGE_CURVE ( 'NONE', #30160, #42622, #54368, .T. ) ; +#30340 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301600, 56.79999999999963500, -28.70555803802997700 ) ) ; +#30341 = AXIS2_PLACEMENT_3D ( 'NONE', #71467, #52681, #40448 ) ; +#30342 = FACE_OUTER_BOUND ( 'NONE', #51069, .T. ) ; +#30344 = ORIENTED_EDGE ( 'NONE', *, *, #72634, .T. ) ; +#30343 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#30345 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627433500, 63.66464174796017500, -28.53896444442245100 ) ) ; +#30346 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30349 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 17.33333333333333900, 8.320721403598817300 ) ) ; +#30350 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30351 = EDGE_CURVE ( 'NONE', #38201, #19495, #22750, .T. ) ; +#30352 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49497, #18540, #37273, #22 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914341322900E-007, 0.0008482521192577283400 ), + .UNSPECIFIED. ) ; +#30353 = EDGE_CURVE ( 'NONE', #65962, #74377, #39918, .T. ) ; +#30354 = ORIENTED_EDGE ( 'NONE', *, *, #34386, .F. ) ; +#30355 = ORIENTED_EDGE ( 'NONE', *, *, #4458, .T. ) ; +#30356 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105664400, 14.05000000000002000, -28.70555803802992800 ) ) ; +#30357 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30358 = EDGE_LOOP ( 'NONE', ( #24348, #268, #42843, #15563, #51215 ) ) ; +#30359 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3190, #77725, #9445, #52957 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350348249900E-007, 0.0004318366892326876900 ), + .UNSPECIFIED. ) ; +#30360 = EDGE_CURVE ( 'NONE', #28145, #70876, #25481, .T. ) ; +#30361 = EDGE_CURVE ( 'NONE', #2852, #23588, #47993, .T. ) ; +#30362 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67431, #23929, #79953, #42648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647845118000E-007, 0.0007596411030281014900 ), + .UNSPECIFIED. ) ; +#30363 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 48.83333333333335000, 0.9380355014189739600 ) ) ; +#30364 = FACE_OUTER_BOUND ( 'NONE', #14680, .T. ) ; +#30365 = ORIENTED_EDGE ( 'NONE', *, *, #55444, .F. ) ; +#30366 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100675500, 31.47636006919908500, -28.38670679782167000 ) ) ; +#30367 = ORIENTED_EDGE ( 'NONE', *, *, #19959, .F. ) ; +#30368 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 51.83333333333332900, -2.545304000185615800 ) ) ; +#30369 = EDGE_CURVE ( 'NONE', #63929, #60644, #11010, .T. ) ; +#30370 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30371 = CONICAL_SURFACE ( 'NONE', #29227, 10.00000000000009200, 0.7853981633974447300 ) ; +#30372 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040396200, 22.65857157145700600, -28.37229765499277800 ) ) ; +#30373 = ORIENTED_EDGE ( 'NONE', *, *, #11665, .T. ) ; +#30374 = VERTEX_POINT ( 'NONE', #65008 ) ; +#30375 = VERTEX_POINT ( 'NONE', #27744 ) ; +#30376 = CARTESIAN_POINT ( 'NONE', ( -17.30192380577545200, 69.84168709918191100, -28.43753768099855600 ) ) ; +#30377 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30378 = CARTESIAN_POINT ( 'NONE', ( -2.716823492900932300, 31.03732497909462000, -28.41043597897462200 ) ) ; +#30379 = VERTEX_POINT ( 'NONE', #71232 ) ; +#30380 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035088400, 28.73507838941436200, -28.27580420063966200 ) ) ; +#30381 = ORIENTED_EDGE ( 'NONE', *, *, #32456, .T. ) ; +#30382 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#30383 = AXIS2_PLACEMENT_3D ( 'NONE', #36950, #80498, #43203 ) ; +#30384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59626, #22347, #78400, #41109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104958736200, 0.0007670610367935448600 ), + .UNSPECIFIED. ) ; +#30386 = CIRCLE ( 'NONE', #7717, 9.500000000000101300 ) ; +#30387 = EDGE_CURVE ( 'NONE', #33234, #72544, #14941, .T. ) ; +#30388 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30389 = EDGE_CURVE ( 'NONE', #14529, #47662, #33431, .T. ) ; +#30390 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280398600, 83.65857157145644900, -28.37229765499320400 ) ) ; +#30391 = EDGE_CURVE ( 'NONE', #51542, #22705, #77304, .T. ) ; +#30392 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#30393 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 39.52242369685794200, -28.53861367218591000 ) ) ; +#30394 = EDGE_LOOP ( 'NONE', ( #39410, #7056, #16743, #13280 ) ) ; +#30395 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#30396 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 64.83849307182666200, -28.68631150211663400 ) ) ; +#30397 = FACE_OUTER_BOUND ( 'NONE', #57226, .T. ) ; +#30398 = AXIS2_PLACEMENT_3D ( 'NONE', #2021, #20809, #8260 ) ; +#30399 = ORIENTED_EDGE ( 'NONE', *, *, #31908, .F. ) ; +#30400 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30401 = ORIENTED_EDGE ( 'NONE', *, *, #35369, .T. ) ; +#30402 = ORIENTED_EDGE ( 'NONE', *, *, #78881, .F. ) ; +#30403 = ORIENTED_EDGE ( 'NONE', *, *, #73253, .T. ) ; +#30404 = FACE_OUTER_BOUND ( 'NONE', #72860, .T. ) ; +#30405 = ORIENTED_EDGE ( 'NONE', *, *, #73291, .T. ) ; +#30406 = CONICAL_SURFACE ( 'NONE', #32071, 10.00000000000009200, 0.7853981633974447300 ) ; +#30407 = AXIS2_PLACEMENT_3D ( 'NONE', #42902, #5653, #49141 ) ; +#30408 = AXIS2_PLACEMENT_3D ( 'NONE', #5530, #56091, #56 ) ; +#30409 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567157600, 28.85339758437810400, -28.20555803802994200 ) ) ; +#30410 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#30411 = PLANE ( 'NONE', #55972 ) ; +#30412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44711, #1241, #50985, #20039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735894395300E-007, 0.0009376786059871952700 ), + .UNSPECIFIED. ) ; +#30413 = CARTESIAN_POINT ( 'NONE', ( 17.40875264640683500, 28.92052012210351800, -28.41157636893867900 ) ) ; +#30414 = ADVANCED_FACE ( 'NONE', ( #13009 ), #11051, .T. ) ; +#30415 = VERTEX_POINT ( 'NONE', #40487 ) ; +#30416 = CIRCLE ( 'NONE', #35212, 10.00000000000009400 ) ; +#30417 = VERTEX_POINT ( 'NONE', #3214 ) ; +#30418 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 58.16666666666667100, -4.152999154772358800 ) ) ; +#30419 = ORIENTED_EDGE ( 'NONE', *, *, #16735, .T. ) ; +#30420 = ADVANCED_FACE ( 'NONE', ( #60696 ), #58720, .F. ) ; +#30421 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 23.33333333333335000, 1.294441961969997200 ) ) ; +#30422 = AXIS2_PLACEMENT_3D ( 'NONE', #43226, #68258, #49459 ) ; +#30423 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 70.16349705304867300, -28.30782889147482400 ) ) ; +#30424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30425 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 49.66349705304866500, -28.30782889147481600 ) ) ; +#30426 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30428 = EDGE_CURVE ( 'NONE', #5379, #32321, #75275, .T. ) ; +#30429 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 25.66666666666667500, -10.73183747965883100 ) ) ; +#30430 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30431 = VERTEX_POINT ( 'NONE', #65550 ) ; +#30432 = AXIS2_PLACEMENT_3D ( 'NONE', #13076, #787, #50276 ) ; +#30433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30434 = ORIENTED_EDGE ( 'NONE', *, *, #77893, .T. ) ; +#30435 = PLANE ( 'NONE', #22561 ) ; +#30436 = ORIENTED_EDGE ( 'NONE', *, *, #16281, .F. ) ; +#30437 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112215300, 20.02667319908790600, -28.37233769390155700 ) ) ; +#30438 = ADVANCED_FACE ( 'NONE', ( #62635 ), #59259, .T. ) ; +#30439 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30440 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30441 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 20.43250300240229200, -28.20555803802995200 ) ) ; +#30442 = CIRCLE ( 'NONE', #41303, 10.00000000000009200 ) ; +#30443 = ORIENTED_EDGE ( 'NONE', *, *, #31345, .F. ) ; +#30444 = CIRCLE ( 'NONE', #32638, 10.50000000000009600 ) ; +#30445 = ORIENTED_EDGE ( 'NONE', *, *, #3146, .F. ) ; +#30446 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#30447 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 81.68929190448862700, -28.20555803803030800 ) ) ; +#30448 = FACE_OUTER_BOUND ( 'NONE', #21284, .T. ) ; +#30449 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#30450 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305478200, 28.20395328581638200, -28.70555803803002000 ) ) ; +#30451 = ORIENTED_EDGE ( 'NONE', *, *, #63126, .T. ) ; +#30452 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811158400, 84.54539096019117000, -28.69802137271993600 ) ) ; +#30453 = ORIENTED_EDGE ( 'NONE', *, *, #5040, .T. ) ; +#30454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30455 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.23796787468681700, -28.38801640354855800 ) ) ; +#30456 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ; +#30457 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 90.34267608797551900, -28.20555803803014400 ) ) ; +#30458 = CONICAL_SURFACE ( 'NONE', #59832, 10.00000000000009200, 0.7853981633974447300 ) ; +#30459 = CARTESIAN_POINT ( 'NONE', ( -17.26457816485423200, 31.28307383672414900, -28.44650835714144000 ) ) ; +#30460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30461 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27644, #2572, #40123, #2842 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478975581230700E-007, 0.0002930330874875932300 ), + .UNSPECIFIED. ) ; +#30462 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 27.50972971738994100, -28.70555803802994500 ) ) ; +#30463 = ORIENTED_EDGE ( 'NONE', *, *, #76291, .T. ) ; +#30464 = FACE_OUTER_BOUND ( 'NONE', #63250, .T. ) ; +#30465 = EDGE_CURVE ( 'NONE', #51984, #38513, #62871, .T. ) ; +#30466 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 29.16666666666665700, 6.794441961969992500 ) ) ; +#30467 = ORIENTED_EDGE ( 'NONE', *, *, #20732, .T. ) ; +#30468 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30470 = EDGE_CURVE ( 'NONE', #45679, #46074, #27608, .T. ) ; +#30469 = VERTEX_POINT ( 'NONE', #34802 ) ; +#30471 = EDGE_LOOP ( 'NONE', ( #19030, #35554, #10052 ) ) ; +#30472 = ORIENTED_EDGE ( 'NONE', *, *, #10810, .T. ) ; +#30473 = CIRCLE ( 'NONE', #15288, 10.00000000000009600 ) ; +#30474 = ORIENTED_EDGE ( 'NONE', *, *, #62391, .T. ) ; +#30475 = CIRCLE ( 'NONE', #24221, 10.00000000000009400 ) ; +#30476 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30477 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 28.63131911501876600, -28.51286550264508100 ) ) ; +#30478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30480 = CARTESIAN_POINT ( 'NONE', ( 7.870063609098050300, 57.15000000000000600, -3.142477194373942200 ) ) ; +#30481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51851, #14643, #45877, #8620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815783499500E-007, 0.0007763385940576963800 ), + .UNSPECIFIED. ) ; +#30482 = EDGE_CURVE ( 'NONE', #25461, #25542, #77220, .T. ) ; +#30483 = EDGE_LOOP ( 'NONE', ( #67569, #8368, #76311 ) ) ; +#30484 = EDGE_CURVE ( 'NONE', #73953, #50416, #330, .T. ) ; +#30485 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477737200, 49.88589569235276900, -28.27354076558354700 ) ) ; +#30486 = EDGE_CURVE ( 'NONE', #36616, #52378, #48366, .T. ) ; +#30487 = CIRCLE ( 'NONE', #48138, 10.00000000000009200 ) ; +#30488 = ORIENTED_EDGE ( 'NONE', *, *, #67166, .T. ) ; +#30489 = FACE_OUTER_BOUND ( 'NONE', #65660, .T. ) ; +#30490 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26053, #7243, #57308, #20058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782218000, 0.0004366687057309843700 ), + .UNSPECIFIED. ) ; +#30491 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819091600, 61.65075715145258800, -28.20555803803014100 ) ) ; +#30492 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30493 = AXIS2_PLACEMENT_3D ( 'NONE', #65315, #15500, #21757 ) ; +#30494 = EDGE_CURVE ( 'NONE', #29841, #31227, #9053, .T. ) ; +#30495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30496 = EDGE_CURVE ( 'NONE', #6871, #44057, #33930, .T. ) ; +#30497 = CARTESIAN_POINT ( 'NONE', ( 17.03178561562192400, 71.31767869357311400, -28.25052235028461600 ) ) ; +#30498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71714, #28221, #65476, #34449 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.874864696302247500E-005, 0.0009376791149924086800 ), + .UNSPECIFIED. ) ; +#30499 = EDGE_CURVE ( 'NONE', #16391, #21828, #19478, .T. ) ; +#30500 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 39.35339758437810100, -28.20555803802995200 ) ) ; +#30501 = ADVANCED_FACE ( 'NONE', ( #56764 ), #38222, .F. ) ; +#30502 = AXIS2_PLACEMENT_3D ( 'NONE', #67303, #79813, #79542 ) ; +#30503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30504 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 60.79999999999999000, -28.45034744217088700 ) ) ; +#30505 = ORIENTED_EDGE ( 'NONE', *, *, #30141, .T. ) ; +#30506 = ADVANCED_FACE ( 'NONE', ( #73332 ), #26124, .T. ) ; +#30507 = AXIS2_PLACEMENT_3D ( 'NONE', #39226, #1965, #45454 ) ; +#30508 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, -2.333333333333328600, 1.294441961969997200 ) ) ; +#30509 = AXIS2_PLACEMENT_3D ( 'NONE', #43743, #6514, #49997 ) ; +#30510 = AXIS2_PLACEMENT_3D ( 'NONE', #7117, #25655, #50615 ) ; +#30511 = PLANE ( 'NONE', #65891 ) ; +#30512 = EDGE_LOOP ( 'NONE', ( #44733, #51783, #69785, #64497 ) ) ; +#30513 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428555200, 81.52858243452105600, -28.70555803802997700 ) ) ; +#30514 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 37.83333333333333600, 0.9380355014189731800 ) ) ; +#30515 = CONICAL_SURFACE ( 'NONE', #76677, 10.00000000000009600, 0.7853981633974482800 ) ; +#30516 = ORIENTED_EDGE ( 'NONE', *, *, #24637, .F. ) ; +#30517 = CIRCLE ( 'NONE', #14897, 9.500000000000097700 ) ; +#30518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30519 = ORIENTED_EDGE ( 'NONE', *, *, #1711, .T. ) ; +#30520 = ADVANCED_FACE ( 'NONE', ( #10066 ), #40677, .T. ) ; +#30521 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.23796787468681700, -28.38801640354855500 ) ) ; +#30522 = ORIENTED_EDGE ( 'NONE', *, *, #53440, .T. ) ; +#30523 = CIRCLE ( 'NONE', #33984, 10.50000000000009900 ) ; +#30524 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 3.000000000000016400, -1.205558038030005300 ) ) ; +#30525 = ORIENTED_EDGE ( 'NONE', *, *, #44458, .F. ) ; +#30526 = ORIENTED_EDGE ( 'NONE', *, *, #50541, .F. ) ; +#30527 = AXIS2_PLACEMENT_3D ( 'NONE', #60851, #11071, #17311 ) ; +#30528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30529 = EDGE_CURVE ( 'NONE', #22393, #1145, #5009, .T. ) ; +#30530 = CIRCLE ( 'NONE', #60314, 9.500000000000099500 ) ; +#30531 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#30532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25339, #68840, #44041, #6819 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331884708700 ), + .UNSPECIFIED. ) ; +#30533 = ADVANCED_FACE ( 'NONE', ( #25659 ), #24163, .T. ) ; +#30535 = FACE_OUTER_BOUND ( 'NONE', #65225, .T. ) ; +#30534 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823698900, 27.69543746431598000, -28.61277292027076100 ) ) ; +#30536 = ORIENTED_EDGE ( 'NONE', *, *, #68910, .F. ) ; +#30537 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 18.13131911501876600, -28.51286550264506300 ) ) ; +#30538 = CIRCLE ( 'NONE', #4488, 9.500000000000101300 ) ; +#30539 = VERTEX_POINT ( 'NONE', #42080 ) ; +#30540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30541 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30542 = EDGE_CURVE ( 'NONE', #50034, #3718, #71322, .T. ) ; +#30543 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 15.70389005397398900, -28.37519436813175800 ) ) ; +#30544 = ORIENTED_EDGE ( 'NONE', *, *, #61459, .F. ) ; +#30545 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30546 = AXIS2_PLACEMENT_3D ( 'NONE', #73285, #23509, #71915 ) ; +#30547 = ORIENTED_EDGE ( 'NONE', *, *, #73704, .T. ) ; +#30548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#30549 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 60.34267608797618000, -28.20555803803014400 ) ) ; +#30550 = VERTEX_POINT ( 'NONE', #23619 ) ; +#30551 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#30552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30553 = CONICAL_SURFACE ( 'NONE', #80450, 10.00000000000009200, 0.7853981633974447300 ) ; +#30554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30555 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30556 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30558 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30559 = ORIENTED_EDGE ( 'NONE', *, *, #80376, .F. ) ; +#30560 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462811600, 60.34267608797633600, -28.20555803803030800 ) ) ; +#30561 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.78933626866497500, -28.53923937255173000 ) ) ; +#30562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30563 = AXIS2_PLACEMENT_3D ( 'NONE', #32738, #76255, #38967 ) ; +#30564 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 87.22261628933270600, -28.70555803802997700 ) ) ; +#30565 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846298500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#30566 = ORIENTED_EDGE ( 'NONE', *, *, #41208, .F. ) ; +#30567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30568 = CIRCLE ( 'NONE', #52865, 10.00000000000009400 ) ; +#30569 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844081200, 51.29362734601330200, -28.24165217761328300 ) ) ; +#30570 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844490800, 75.79999999999982700, -28.20555803803014400 ) ) ; +#30571 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 53.67681279774500800, -28.70555803802997700 ) ) ; +#30572 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#30573 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922501200, 60.09037803491501300, -28.29483400905890600 ) ) ; +#30574 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 71.99560977511615100, -28.70555803803030800 ) ) ; +#30575 = AXIS2_PLACEMENT_3D ( 'NONE', #67026, #42242, #48224 ) ; +#30576 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851405000, 46.50238095238082500, -28.70555803802996700 ) ) ; +#30577 = EDGE_CURVE ( 'NONE', #9828, #9775, #56860, .T. ) ; +#30578 = CIRCLE ( 'NONE', #36724, 10.00000000000009400 ) ; +#30579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15138, #52365, #64947, #27675 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405669901211600E-007, 0.0007670610367935386800 ), + .UNSPECIFIED. ) ; +#30580 = ORIENTED_EDGE ( 'NONE', *, *, #67527, .F. ) ; +#30581 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 43.83333333333334300, 6.794441961969992500 ) ) ; +#30582 = ORIENTED_EDGE ( 'NONE', *, *, #57856, .T. ) ; +#30583 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#30584 = ORIENTED_EDGE ( 'NONE', *, *, #64667, .F. ) ; +#30585 = ADVANCED_FACE ( 'NONE', ( #9549 ), #38704, .F. ) ; +#30586 = CIRCLE ( 'NONE', #17251, 9.500000000000101300 ) ; +#30587 = ORIENTED_EDGE ( 'NONE', *, *, #71746, .F. ) ; +#30588 = CONICAL_SURFACE ( 'NONE', #51789, 10.00000000000009200, 0.7853981633974447300 ) ; +#30589 = EDGE_CURVE ( 'NONE', #74602, #53552, #55280, .T. ) ; +#30590 = ORIENTED_EDGE ( 'NONE', *, *, #7812, .F. ) ; +#30591 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#30592 = CIRCLE ( 'NONE', #13638, 10.50000000000009400 ) ; +#30593 = CONICAL_SURFACE ( 'NONE', #8531, 10.00000000000009400, 0.7853981633974447300 ) ; +#30594 = ORIENTED_EDGE ( 'NONE', *, *, #16901, .F. ) ; +#30595 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30596 = VERTEX_POINT ( 'NONE', #11383 ) ; +#30597 = ORIENTED_EDGE ( 'NONE', *, *, #10470, .T. ) ; +#30598 = ADVANCED_FACE ( 'NONE', ( #7572 ), #69870, .F. ) ; +#30599 = AXIS2_PLACEMENT_3D ( 'NONE', #31774, #75282, #37997 ) ; +#30600 = EDGE_CURVE ( 'NONE', #49574, #13135, #5651, .T. ) ; +#30601 = EDGE_CURVE ( 'NONE', #13047, #50735, #42384, .T. ) ; +#30602 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30603 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30604 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13150, #50339, #25654, #69144 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694917099700E-007, 0.0008724363063896018200 ), + .UNSPECIFIED. ) ; +#30605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30606 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 43.65857157145691000, -28.20555803802997700 ) ) ; +#30607 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 15.16666666666667500, -12.20555803803000000 ) ) ; +#30608 = CARTESIAN_POINT ( 'NONE', ( 2.621978672527905300, 18.13131911501857000, -28.51286550264531900 ) ) ; +#30609 = FACE_OUTER_BOUND ( 'NONE', #25683, .T. ) ; +#30610 = EDGE_CURVE ( 'NONE', #36928, #71934, #22204, .T. ) ; +#30611 = ORIENTED_EDGE ( 'NONE', *, *, #48558, .F. ) ; +#30612 = AXIS2_PLACEMENT_3D ( 'NONE', #56055, #18806, #62338 ) ; +#30613 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#30614 = CONICAL_SURFACE ( 'NONE', #52355, 10.50000000000009600, 0.7853981633974500600 ) ; +#30615 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30616 = ORIENTED_EDGE ( 'NONE', *, *, #33127, .F. ) ; +#30617 = ADVANCED_FACE ( 'NONE', ( #42626 ), #3686, .T. ) ; +#30618 = ORIENTED_EDGE ( 'NONE', *, *, #58151, .T. ) ; +#30619 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385291700, 49.49322649091135400, -28.30799595738872700 ) ) ; +#30620 = ORIENTED_EDGE ( 'NONE', *, *, #61926, .F. ) ; +#30621 = ORIENTED_EDGE ( 'NONE', *, *, #43527, .F. ) ; +#30622 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 41.46868088498121800, -28.51286550264513100 ) ) ; +#30623 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 41.67701665379225100, -28.20555803802997400 ) ) ; +#30624 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 80.16054007504463600, -28.34042301926881200 ) ) ; +#30625 = VERTEX_POINT ( 'NONE', #36634 ) ; +#30626 = FACE_OUTER_BOUND ( 'NONE', #20573, .T. ) ; +#30627 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#30628 = AXIS2_PLACEMENT_3D ( 'NONE', #61042, #67277, #17521 ) ; +#30629 = EDGE_LOOP ( 'NONE', ( #62450, #13439, #27991, #32632 ) ) ; +#30630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61989, #18455, #74494, #37188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750425700, 0.0007596411030282979400 ), + .UNSPECIFIED. ) ; +#30631 = EDGE_CURVE ( 'NONE', #39513, #34852, #73805, .T. ) ; +#30632 = ADVANCED_FACE ( 'NONE', ( #20254 ), #61696, .T. ) ; +#30633 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#30635 = AXIS2_PLACEMENT_3D ( 'NONE', #50538, #13338, #56835 ) ; +#30634 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275506100, 46.66666666666669300, -5.205558038030008400 ) ) ; +#30636 = ORIENTED_EDGE ( 'NONE', *, *, #69781, .F. ) ; +#30637 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#30638 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 22.65857157145701000, -28.20555803802995200 ) ) ; +#30639 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 49.66666666666668600, 1.294441961969997200 ) ) ; +#30640 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30641 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878500, 41.43250300240230600, -28.23966044827355000 ) ) ; +#30642 = ORIENTED_EDGE ( 'NONE', *, *, #12076, .T. ) ; +#30643 = FACE_OUTER_BOUND ( 'NONE', #64488, .T. ) ; +#30644 = EDGE_CURVE ( 'NONE', #39296, #75825, #27983, .T. ) ; +#30645 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30646 = AXIS2_PLACEMENT_3D ( 'NONE', #46402, #9146, #52682 ) ; +#30647 = CARTESIAN_POINT ( 'NONE', ( 4.036255108181464400, 89.94924284854707300, -28.20555803803014100 ) ) ; +#30648 = AXIS2_PLACEMENT_3D ( 'NONE', #5248, #48725, #11517 ) ; +#30649 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30651 = CARTESIAN_POINT ( 'NONE', ( 3.976832725519384500, 49.58088969930749800, -28.30223898143228900 ) ) ; +#30652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#30653 = FACE_OUTER_BOUND ( 'NONE', #16224, .T. ) ; +#30654 = AXIS2_PLACEMENT_3D ( 'NONE', #1495, #76029, #57544 ) ; +#30655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62601, #25350, #31602, #75112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697736842800E-007, 0.0008724363063898914100 ), + .UNSPECIFIED. ) ; +#30656 = CARTESIAN_POINT ( 'NONE', ( -15.46693852783916900, 55.79999999999999000, -28.37297418064014600 ) ) ; +#30657 = CARTESIAN_POINT ( 'NONE', ( -9.881064473890871700, 60.49763722318498800, -28.32100408376067000 ) ) ; +#30658 = VERTEX_POINT ( 'NONE', #55666 ) ; +#30659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30662 = ORIENTED_EDGE ( 'NONE', *, *, #66655, .T. ) ; +#30661 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 60.16054007504464400, -28.34042301926881200 ) ) ; +#30663 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#30664 = FACE_OUTER_BOUND ( 'NONE', #72166, .T. ) ; +#30665 = AXIS2_PLACEMENT_3D ( 'NONE', #2670, #8916, #15210 ) ; +#30666 = FACE_OUTER_BOUND ( 'NONE', #44035, .T. ) ; +#30667 = ORIENTED_EDGE ( 'NONE', *, *, #18887, .T. ) ; +#30668 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.62753447840886200, -28.38801640354855500 ) ) ; +#30669 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 56.00000000000000700, -1.205558038030002800 ) ) ; +#30670 = ORIENTED_EDGE ( 'NONE', *, *, #21282, .F. ) ; +#30671 = CIRCLE ( 'NONE', #78199, 10.00000000000009200 ) ; +#30672 = FACE_OUTER_BOUND ( 'NONE', #8101, .T. ) ; +#30673 = ORIENTED_EDGE ( 'NONE', *, *, #26300, .F. ) ; +#30674 = ORIENTED_EDGE ( 'NONE', *, *, #79413, .F. ) ; +#30675 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 21.16666666666667100, -2.545304000185620600 ) ) ; +#30676 = AXIS2_PLACEMENT_3D ( 'NONE', #8411, #51908, #14696 ) ; +#30677 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180756500, 79.94924284854684500, -28.20555803802997700 ) ) ; +#30678 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#30679 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#30680 = FACE_OUTER_BOUND ( 'NONE', #12419, .T. ) ; +#30681 = ORIENTED_EDGE ( 'NONE', *, *, #55805, .T. ) ; +#30682 = CIRCLE ( 'NONE', #22145, 10.00000000000009200 ) ; +#30683 = ORIENTED_EDGE ( 'NONE', *, *, #10324, .F. ) ; +#30684 = EDGE_LOOP ( 'NONE', ( #19523, #20140, #39395, #22815 ) ) ; +#30685 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 23.50000000000001100, 6.847000845227646500 ) ) ; +#30686 = EDGE_LOOP ( 'NONE', ( #5806, #58058, #79844 ) ) ; +#30687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30688 = ORIENTED_EDGE ( 'NONE', *, *, #32252, .F. ) ; +#30689 = CONICAL_SURFACE ( 'NONE', #72477, 10.50000000000009600, 0.7853981633974518300 ) ; +#30690 = ORIENTED_EDGE ( 'NONE', *, *, #3143, .F. ) ; +#30691 = CARTESIAN_POINT ( 'NONE', ( 15.41232936306190600, 89.70395328582014800, -28.70555803802999500 ) ) ; +#30692 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52489, #71286, #9244, #52774 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866776315700E-007, 0.001076778502991527100 ), + .UNSPECIFIED. ) ; +#30693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30694 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30695 = ORIENTED_EDGE ( 'NONE', *, *, #4720, .T. ) ; +#30696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30697 = ORIENTED_EDGE ( 'NONE', *, *, #62068, .T. ) ; +#30698 = CONICAL_SURFACE ( 'NONE', #53482, 10.00000000000009200, 0.7853981633974447300 ) ; +#30699 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707925700, 79.93589406416671700, -28.68054222049965000 ) ) ; +#30700 = ORIENTED_EDGE ( 'NONE', *, *, #631, .F. ) ; +#30701 = EDGE_CURVE ( 'NONE', #816, #38410, #71863, .T. ) ; +#30702 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906784300, 38.92963663972539500, -28.27338767626450200 ) ) ; +#30703 = VERTEX_POINT ( 'NONE', #61960 ) ; +#30704 = ADVANCED_FACE ( 'NONE', ( #67938 ), #1726, .T. ) ; +#30705 = CONICAL_SURFACE ( 'NONE', #58007, 10.50000000000009600, 0.7853981633974500600 ) ; +#30706 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 14.05000000000000400, -28.20555803802992800 ) ) ; +#30707 = EDGE_CURVE ( 'NONE', #31582, #39774, #18305, .T. ) ; +#30708 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30709 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#30710 = ADVANCED_FACE ( 'NONE', ( #36780 ), #32878, .F. ) ; +#30711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30712 = EDGE_CURVE ( 'NONE', #40242, #35530, #13506, .T. ) ; +#30713 = ADVANCED_FACE ( 'NONE', ( #51338 ), #80584, .F. ) ; +#30714 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 28.65930907398620100, -28.35186440610856500 ) ) ; +#30715 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30716 = EDGE_CURVE ( 'NONE', #1060, #21820, #16369, .T. ) ; +#30717 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#30718 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 27.00000000000001100, -9.205558038030005700 ) ) ; +#30719 = FACE_OUTER_BOUND ( 'NONE', #19991, .T. ) ; +#30720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30721 = ORIENTED_EDGE ( 'NONE', *, *, #45421, .T. ) ; +#30722 = ORIENTED_EDGE ( 'NONE', *, *, #4223, .F. ) ; +#30723 = CIRCLE ( 'NONE', #26512, 10.50000000000009600 ) ; +#30724 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30725 = CARTESIAN_POINT ( 'NONE', ( -11.18653997827070200, 6.877501000800540600, -28.20555803802993100 ) ) ; +#30726 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#30727 = AXIS2_PLACEMENT_3D ( 'NONE', #21591, #58820, #34077 ) ; +#30728 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30730 = ORIENTED_EDGE ( 'NONE', *, *, #9866, .F. ) ; +#30729 = EDGE_CURVE ( 'NONE', #39394, #20304, #79814, .T. ) ; +#30731 = EDGE_CURVE ( 'NONE', #75236, #73733, #53335, .T. ) ; +#30732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30733 = EDGE_CURVE ( 'NONE', #75334, #48826, #65385, .T. ) ; +#30734 = AXIS2_PLACEMENT_3D ( 'NONE', #21668, #40400, #52905 ) ; +#30735 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#30736 = CIRCLE ( 'NONE', #47351, 10.00000000000009200 ) ; +#30737 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195930400, 77.94142842854297700, -28.37229765499282100 ) ) ; +#30738 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 72.31032580521099400, -28.59353418718932400 ) ) ; +#30739 = FACE_OUTER_BOUND ( 'NONE', #30150, .T. ) ; +#30740 = VERTEX_POINT ( 'NONE', #6705 ) ; +#30741 = AXIS2_PLACEMENT_3D ( 'NONE', #11069, #54573, #17309 ) ; +#30742 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30743 = FACE_OUTER_BOUND ( 'NONE', #5304, .T. ) ; +#30744 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30745 = AXIS2_PLACEMENT_3D ( 'NONE', #13233, #19469, #50417 ) ; +#30746 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73438, #60937, #42392, #5157 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634381314300E-007, 0.0008082706238601807800 ), + .UNSPECIFIED. ) ; +#30748 = VERTEX_POINT ( 'NONE', #63023 ) ; +#30747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30749 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#30750 = EDGE_CURVE ( 'NONE', #78682, #30084, #50834, .T. ) ; +#30751 = ORIENTED_EDGE ( 'NONE', *, *, #52235, .F. ) ; +#30752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30753 = AXIS2_PLACEMENT_3D ( 'NONE', #5090, #36108, #11368 ) ; +#30754 = AXIS2_PLACEMENT_3D ( 'NONE', #15029, #58547, #21300 ) ; +#30755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30756 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30757 = CIRCLE ( 'NONE', #71223, 10.00000000000009200 ) ; +#30758 = CONICAL_SURFACE ( 'NONE', #63283, 10.50000000000009800, 0.7853981633974518300 ) ; +#30759 = ORIENTED_EDGE ( 'NONE', *, *, #4538, .T. ) ; +#30760 = EDGE_LOOP ( 'NONE', ( #55783, #80800, #68882, #3012, #43191 ) ) ; +#30761 = VERTEX_POINT ( 'NONE', #7223 ) ; +#30762 = ORIENTED_EDGE ( 'NONE', *, *, #74337, .T. ) ; +#30763 = AXIS2_PLACEMENT_3D ( 'NONE', #57650, #20142, #14154 ) ; +#30764 = EDGE_LOOP ( 'NONE', ( #76289, #38061, #58483, #46461, #79273, #27479, #17568, #10942 ) ) ; +#30765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30766 = EDGE_LOOP ( 'NONE', ( #29693, #12628, #43661 ) ) ; +#30767 = CIRCLE ( 'NONE', #8798, 9.500000000000095900 ) ; +#30768 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 70.66666666666665700, -3.705558038030004400 ) ) ; +#30769 = ORIENTED_EDGE ( 'NONE', *, *, #13224, .F. ) ; +#30770 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30771 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 9.722944711948574800, -28.20555803802994200 ) ) ; +#30772 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 35.66666666666667900, -5.205558038030003100 ) ) ; +#30773 = ORIENTED_EDGE ( 'NONE', *, *, #13203, .F. ) ; +#30774 = FACE_OUTER_BOUND ( 'NONE', #25324, .T. ) ; +#30775 = AXIS2_PLACEMENT_3D ( 'NONE', #8947, #52463, #15240 ) ; +#30777 = ORIENTED_EDGE ( 'NONE', *, *, #65974, .F. ) ; +#30776 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198469800, 50.90033558196108000, -28.70555803802997700 ) ) ; +#30778 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30779 = ORIENTED_EDGE ( 'NONE', *, *, #42179, .T. ) ; +#30780 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 87.92318720225496500, -28.70555803802997700 ) ) ; +#30781 = FACE_OUTER_BOUND ( 'NONE', #5951, .T. ) ; +#30782 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 0.8333333333333405900, 0.9380355014189731800 ) ) ; +#30783 = CARTESIAN_POINT ( 'NONE', ( 9.963744891818969100, 79.94924284854664600, -28.20555803803014100 ) ) ; +#30784 = CARTESIAN_POINT ( 'NONE', ( -2.760105492672139300, 89.66414768974080100, -28.38420446581274700 ) ) ; +#30785 = AXIS2_PLACEMENT_3D ( 'NONE', #31779, #38002, #18978 ) ; +#30786 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454051400, 52.51973550835649700, -28.70555803803010200 ) ) ; +#30787 = ORIENTED_EDGE ( 'NONE', *, *, #15609, .F. ) ; +#30788 = CARTESIAN_POINT ( 'NONE', ( 9.530136888809634500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#30790 = ADVANCED_FACE ( 'NONE', ( #66002 ), #14394, .T. ) ; +#30789 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1053, #38303, #50805, #13615 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.124898288190170600E-016, 0.001246264537623087900 ), + .UNSPECIFIED. ) ; +#30791 = PLANE ( 'NONE', #70303 ) ; +#30792 = EDGE_CURVE ( 'NONE', #20507, #14568, #36402, .T. ) ; +#30793 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993600, 15.22261628933212800, -28.70555803803042500 ) ) ; +#30794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30795 = AXIS2_PLACEMENT_3D ( 'NONE', #25624, #69112, #31870 ) ; +#30796 = CIRCLE ( 'NONE', #28785, 10.00000000000009400 ) ; +#30797 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.23796787468681700, -28.38801640354855500 ) ) ; +#30798 = ORIENTED_EDGE ( 'NONE', *, *, #17348, .F. ) ; +#30799 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 79.97246552159074900, -28.38801640354893500 ) ) ; +#30800 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24741, #80773, #18759, #62279 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#30801 = CONICAL_SURFACE ( 'NONE', #78018, 10.00000000000009400, 0.7853981633974447300 ) ; +#30802 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30803 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306326500, 49.50210619075101400, -28.25343951603330700 ) ) ; +#30804 = CARTESIAN_POINT ( 'NONE', ( -16.68942240455976700, 77.07608412203504100, -28.56336785413097700 ) ) ; +#30805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30806 = ORIENTED_EDGE ( 'NONE', *, *, #69168, .T. ) ; +#30807 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70020, #2015, #20804, #64355 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632944392800E-007, 0.0008082706238600355000 ), + .UNSPECIFIED. ) ; +#30808 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894000, 61.13768531620324600, -28.37082013777818900 ) ) ; +#30810 = EDGE_LOOP ( 'NONE', ( #59299, #48729, #25099, #46007 ) ) ; +#30809 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 47.67143691309408400, -28.36981695106779700 ) ) ; +#30811 = ADVANCED_FACE ( 'NONE', ( #34863 ), #62103, .T. ) ; +#30812 = CONICAL_SURFACE ( 'NONE', #1927, 10.50000000000009600, 0.7853981633974500600 ) ; +#30813 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995705000, 44.61903418172678200, -28.69431509262337700 ) ) ; +#30814 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30815 = ORIENTED_EDGE ( 'NONE', *, *, #37831, .T. ) ; +#30816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30817 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51096, #13902, #69901, #32650 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137489174000 ), + .UNSPECIFIED. ) ; +#30818 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052394800, 60.28233213024645900, -28.25051428653856100 ) ) ; +#30819 = CIRCLE ( 'NONE', #60412, 10.00000000000009200 ) ; +#30820 = CIRCLE ( 'NONE', #49057, 10.50000000000009800 ) ; +#30822 = EDGE_CURVE ( 'NONE', #21270, #49034, #21965, .T. ) ; +#30821 = VERTEX_POINT ( 'NONE', #7493 ) ; +#30823 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 73.65857157145704500, -28.20555803803014400 ) ) ; +#30824 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818085700, 81.65075715145329100, -28.20555803803047800 ) ) ; +#30825 = EDGE_CURVE ( 'NONE', #40831, #35828, #7481, .T. ) ; +#30826 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922502800, 81.50962196508494600, -28.29483400905892100 ) ) ; +#30827 = EDGE_LOOP ( 'NONE', ( #5700, #25019, #69208 ) ) ; +#30828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30829 = ORIENTED_EDGE ( 'NONE', *, *, #43869, .T. ) ; +#30830 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541606400, 18.58874248361071600, -28.53740755999533700 ) ) ; +#30831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30832 = EDGE_CURVE ( 'NONE', #17425, #32213, #73825, .T. ) ; +#30833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30834 = ADVANCED_FACE ( 'NONE', ( #30955 ), #29047, .T. ) ; +#30835 = EDGE_CURVE ( 'NONE', #2685, #52135, #45486, .T. ) ; +#30836 = CIRCLE ( 'NONE', #42866, 9.500000000000099500 ) ; +#30837 = AXIS2_PLACEMENT_3D ( 'NONE', #62302, #25031, #68550 ) ; +#30838 = EDGE_LOOP ( 'NONE', ( #45297, #71311, #63833 ) ) ; +#30839 = ORIENTED_EDGE ( 'NONE', *, *, #58473, .F. ) ; +#30840 = ORIENTED_EDGE ( 'NONE', *, *, #72083, .F. ) ; +#30841 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.73796787468680600, -28.38801640354855100 ) ) ; +#30842 = ORIENTED_EDGE ( 'NONE', *, *, #79909, .T. ) ; +#30843 = FACE_OUTER_BOUND ( 'NONE', #11617, .T. ) ; +#30844 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 41.66666666666667900, -8.133761268305512700 ) ) ; +#30845 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 70.16054007504432400, -28.34042301926905700 ) ) ; +#30846 = ORIENTED_EDGE ( 'NONE', *, *, #46042, .F. ) ; +#30847 = AXIS2_PLACEMENT_3D ( 'NONE', #58486, #39984, #70989 ) ; +#30848 = EDGE_LOOP ( 'NONE', ( #63418, #20283, #54823, #65499, #38980 ) ) ; +#30849 = EDGE_CURVE ( 'NONE', #2378, #901, #49400, .T. ) ; +#30850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59828, #78597, #41301, #4040 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641853948665200E-007, 0.0008759659331879530500 ), + .UNSPECIFIED. ) ; +#30851 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339104700, 51.46283204837309500, -28.48697406221716100 ) ) ; +#30852 = EDGE_CURVE ( 'NONE', #6581, #35438, #59357, .T. ) ; +#30853 = EDGE_CURVE ( 'NONE', #69047, #54001, #57241, .T. ) ; +#30854 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#30855 = CONICAL_SURFACE ( 'NONE', #25257, 10.50000000000009800, 0.7853981633974518300 ) ; +#30856 = AXIS2_PLACEMENT_3D ( 'NONE', #29975, #4907, #23414 ) ; +#30857 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#30858 = ORIENTED_EDGE ( 'NONE', *, *, #68735, .F. ) ; +#30859 = LINE ( 'NONE', #37956, #78564 ) ; +#30860 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30861 = FACE_OUTER_BOUND ( 'NONE', #68801, .T. ) ; +#30862 = EDGE_CURVE ( 'NONE', #16645, #77259, #47444, .T. ) ; +#30863 = AXIS2_PLACEMENT_3D ( 'NONE', #29803, #67021, #4464 ) ; +#30864 = AXIS2_PLACEMENT_3D ( 'NONE', #23310, #66569, #66843 ) ; +#30866 = ORIENTED_EDGE ( 'NONE', *, *, #61240, .T. ) ; +#30865 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30867 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#30868 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900952700, 10.03732497909462000, -28.41043597897459300 ) ) ; +#30869 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 41.46868088498121800, -28.51286550264513100 ) ) ; +#30870 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 13.00000000000001600, 9.794441961969996100 ) ) ; +#30871 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999899600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#30872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30873 = CONICAL_SURFACE ( 'NONE', #59976, 10.50000000000009900, 0.7853981633974518300 ) ; +#30874 = ORIENTED_EDGE ( 'NONE', *, *, #14721, .F. ) ; +#30875 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30876 = VERTEX_POINT ( 'NONE', #70323 ) ; +#30877 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998600, 21.97376207875059600, -28.70555803802995200 ) ) ; +#30878 = ORIENTED_EDGE ( 'NONE', *, *, #34318, .F. ) ; +#30879 = CONICAL_SURFACE ( 'NONE', #66529, 10.50000000000009600, 0.7853981633974500600 ) ; +#30880 = AXIS2_PLACEMENT_3D ( 'NONE', #59951, #10166, #16422 ) ; +#30881 = ORIENTED_EDGE ( 'NONE', *, *, #46996, .T. ) ; +#30882 = ADVANCED_FACE ( 'NONE', ( #76659 ), #74732, .F. ) ; +#30883 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432712300, 18.35339758437789800, -28.20555803803009500 ) ) ; +#30884 = CARTESIAN_POINT ( 'NONE', ( 6.242557326658601200, 44.56004727715419700, 3.982015503035964500 ) ) ; +#30885 = AXIS2_PLACEMENT_3D ( 'NONE', #2347, #45856, #8602 ) ; +#30886 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192832700, 54.80000000000001100, -28.70555803802997700 ) ) ; +#30887 = CIRCLE ( 'NONE', #40122, 9.500000000000097700 ) ; +#30888 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 47.50000000000000700, -4.865812075874393000 ) ) ; +#30889 = ORIENTED_EDGE ( 'NONE', *, *, #929, .T. ) ; +#30890 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282700, 9.746602415621900700, -28.20555803802992800 ) ) ; +#30891 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 41.43650294695131500, -28.30782889147482400 ) ) ; +#30892 = EDGE_CURVE ( 'NONE', #24597, #20123, #44842, .T. ) ; +#30893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30894 = AXIS2_PLACEMENT_3D ( 'NONE', #16727, #10752, #78769 ) ; +#30895 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30897 = ORIENTED_EDGE ( 'NONE', *, *, #52600, .T. ) ; +#30898 = ADVANCED_FACE ( 'NONE', ( #27059 ), #41625, .T. ) ; +#30899 = AXIS2_PLACEMENT_3D ( 'NONE', #24, #25068, #61809 ) ; +#30900 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#30901 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709907300, 31.03732497909462000, -28.41043597897462200 ) ) ; +#30902 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#30903 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30904 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13745, #50939, #19990, #63512, #26258, #69737 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 4.192148702340308600E-017, 0.001587068747398415600, 0.003174137494796789500 ), + .UNSPECIFIED. ) ; +#30905 = VECTOR ( 'NONE', #41010, 1000.000000000000000 ) ; +#30906 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30907 = CARTESIAN_POINT ( 'NONE', ( -0.7694046566806028700, 50.54999999999999700, -28.45605139793075000 ) ) ; +#30908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30909 = VERTEX_POINT ( 'NONE', #21120 ) ; +#30910 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30911 = ORIENTED_EDGE ( 'NONE', *, *, #50842, .F. ) ; +#30912 = ADVANCED_FACE ( 'NONE', ( #60156 ), #8514, .T. ) ; +#30913 = ADVANCED_FACE ( 'NONE', ( #78660 ), #39852, .T. ) ; +#30914 = VERTEX_POINT ( 'NONE', #15106 ) ; +#30915 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30916 = ORIENTED_EDGE ( 'NONE', *, *, #24431, .F. ) ; +#30917 = CARTESIAN_POINT ( 'NONE', ( 16.81665446368110800, 6.893879557643169100, -28.20555803802619400 ) ) ; +#30918 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385225100, 38.99322649091141100, -28.30799595738880500 ) ) ; +#30919 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30920 = ORIENTED_EDGE ( 'NONE', *, *, #44955, .T. ) ; +#30921 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46163, #8900, #15188, #58707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001738906318342034700, 0.001775972851782000000 ), + .UNSPECIFIED. ) ; +#30922 = CARTESIAN_POINT ( 'NONE', ( 3.959729345560828700, 49.72438272935919900, -28.30310183417010000 ) ) ; +#30923 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30925 = ADVANCED_FACE ( 'NONE', ( #25093 ), #39673, .F. ) ; +#30926 = CONICAL_SURFACE ( 'NONE', #59078, 10.00000000000009400, 0.7853981633974447300 ) ; +#30927 = EDGE_CURVE ( 'NONE', #29074, #37852, #30461, .T. ) ; +#30928 = ORIENTED_EDGE ( 'NONE', *, *, #58239, .F. ) ; +#30929 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#30930 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 53.83333333333334300, 1.741883078712340300 ) ) ; +#30931 = ORIENTED_EDGE ( 'NONE', *, *, #69173, .F. ) ; +#30933 = EDGE_CURVE ( 'NONE', #68675, #16048, #15974, .T. ) ; +#30932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58318, #21078, #27341, #70818 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520751200, 0.004414519045341085500 ), + .UNSPECIFIED. ) ; +#30934 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 28.66349705304866500, -28.30782889147480600 ) ) ; +#30935 = CONICAL_SURFACE ( 'NONE', #5278, 10.00000000000009200, 0.7853981633974447300 ) ; +#30936 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 19.00000000000000400, -1.205558038030002800 ) ) ; +#30937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30938 = EDGE_CURVE ( 'NONE', #31373, #39653, #12455, .T. ) ; +#30939 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51915, #8416, #26963, #27229 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764781222596600E-007, 0.0009376791149929601100 ), + .UNSPECIFIED. ) ; +#30940 = EDGE_LOOP ( 'NONE', ( #65374, #4932, #9497, #10193 ) ) ; +#30941 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#30942 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30943 = EDGE_CURVE ( 'NONE', #79130, #29777, #1498, .T. ) ; +#30944 = EDGE_CURVE ( 'NONE', #57484, #12956, #72788, .T. ) ; +#30945 = CIRCLE ( 'NONE', #480, 10.50000000000009600 ) ; +#30946 = ORIENTED_EDGE ( 'NONE', *, *, #65397, .F. ) ; +#30947 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 70.16054007504466500, -28.34042301926881500 ) ) ; +#30948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30949 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 21.33333333333335000, -6.705558038030005700 ) ) ; +#30950 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#30951 = ORIENTED_EDGE ( 'NONE', *, *, #51652, .T. ) ; +#30952 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 39.52242369685794200, -28.53861367218591000 ) ) ; +#30953 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655698900, 28.42298334620753800, -28.20555803802994500 ) ) ; +#30954 = EDGE_LOOP ( 'NONE', ( #51535, #77164, #33519 ) ) ; +#30955 = FACE_OUTER_BOUND ( 'NONE', #6733, .T. ) ; +#30956 = AXIS2_PLACEMENT_3D ( 'NONE', #1104, #44576, #7351 ) ; +#30957 = EDGE_CURVE ( 'NONE', #16674, #1536, #56213, .T. ) ; +#30958 = EDGE_CURVE ( 'NONE', #11140, #72096, #67840, .T. ) ; +#30959 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148608800, 25.50238095238080800, -28.70555803802994200 ) ) ; +#30960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30961 = EDGE_CURVE ( 'NONE', #65963, #62599, #10498, .T. ) ; +#30962 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534570300, 39.99920551340398600, -28.70555803802995200 ) ) ; +#30963 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#30964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#30965 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#30966 = FACE_OUTER_BOUND ( 'NONE', #34941, .T. ) ; +#30967 = EDGE_LOOP ( 'NONE', ( #6813, #63612, #35326, #925, #12525, #40250 ) ) ; +#30968 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#30969 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30971 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 81.65075715145309200, -28.20555803802997400 ) ) ; +#30972 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807149500, 56.79999999999998300, -28.70555803802997700 ) ) ; +#30973 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30974 = VERTEX_POINT ( 'NONE', #59443 ) ; +#30975 = AXIS2_PLACEMENT_3D ( 'NONE', #32624, #76125, #38848 ) ; +#30976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30977 = AXIS2_PLACEMENT_3D ( 'NONE', #65457, #3376, #46885 ) ; +#30978 = AXIS2_PLACEMENT_3D ( 'NONE', #72837, #48031, #60600 ) ; +#30979 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65999, #3955, #22741, #66273 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043666200, 0.008406583008691324200 ), + .UNSPECIFIED. ) ; +#30980 = ADVANCED_FACE ( 'NONE', ( #6583 ), #4639, .F. ) ; +#30981 = CONICAL_SURFACE ( 'NONE', #19128, 10.00000000000009200, 0.7853981633974447300 ) ; +#30982 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#30983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30984 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#30985 = CIRCLE ( 'NONE', #49516, 10.00000000000009400 ) ; +#30986 = ORIENTED_EDGE ( 'NONE', *, *, #45632, .T. ) ; +#30987 = ORIENTED_EDGE ( 'NONE', *, *, #75692, .T. ) ; +#30988 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 24.83333333333336400, 6.794441961969992500 ) ) ; +#30989 = VERTEX_POINT ( 'NONE', #47150 ) ; +#30990 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#30991 = ORIENTED_EDGE ( 'NONE', *, *, #17628, .F. ) ; +#30992 = ORIENTED_EDGE ( 'NONE', *, *, #53581, .F. ) ; +#30993 = ORIENTED_EDGE ( 'NONE', *, *, #80405, .F. ) ; +#30994 = ORIENTED_EDGE ( 'NONE', *, *, #61325, .F. ) ; +#30995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30996 = ADVANCED_FACE ( 'NONE', ( #23154 ), #52285, .F. ) ; +#30997 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282700, 9.746602415621900700, -28.20555803802992800 ) ) ; +#30998 = AXIS2_PLACEMENT_3D ( 'NONE', #70173, #32914, #76424 ) ; +#31000 = ORIENTED_EDGE ( 'NONE', *, *, #31906, .T. ) ; +#30999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31001 = EDGE_CURVE ( 'NONE', #8139, #21273, #53361, .T. ) ; +#31002 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390328900, 71.46283204837320100, -28.48697406221674600 ) ) ; +#31003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31004 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537171500, 60.34267608797603800, -28.20555803802997700 ) ) ; +#31005 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972586700, 82.22511094383837400, -28.55192314908415000 ) ) ; +#31006 = EDGE_LOOP ( 'NONE', ( #42766, #4506, #68458 ) ) ; +#31007 = CIRCLE ( 'NONE', #29317, 10.50000000000009600 ) ; +#31008 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.66749699759768100, -28.20555803802996700 ) ) ; +#31009 = VERTEX_POINT ( 'NONE', #21907 ) ; +#31010 = ADVANCED_FACE ( 'NONE', ( #43557 ), #41197, .T. ) ; +#31011 = EDGE_CURVE ( 'NONE', #6864, #25973, #38865, .T. ) ; +#31012 = ORIENTED_EDGE ( 'NONE', *, *, #10072, .F. ) ; +#31013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31014 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#31015 = CONICAL_SURFACE ( 'NONE', #19829, 10.00000000000009200, 0.7853981633974415100 ) ; +#31016 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528300, 14.05000000000000200, -28.20555803802992800 ) ) ; +#31017 = EDGE_LOOP ( 'NONE', ( #59282, #57269, #77869, #23082 ) ) ; +#31018 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7340, #69373, #26156, #69634 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002804316273640051900, 0.0005475052052037508000 ), + .UNSPECIFIED. ) ; +#31019 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31021 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 35.04999999999999700, -28.20555803802995200 ) ) ; +#31022 = VERTEX_POINT ( 'NONE', #34966 ) ; +#31023 = ADVANCED_FACE ( 'NONE', ( #21207 ), #2657, .T. ) ; +#31024 = AXIS2_PLACEMENT_3D ( 'NONE', #12486, #55976, #18732 ) ; +#31025 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#31026 = FACE_OUTER_BOUND ( 'NONE', #41940, .T. ) ; +#31028 = EDGE_LOOP ( 'NONE', ( #11404, #61297, #56558, #78939, #58234, #22046, #36195, #11680 ) ) ; +#31027 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#31029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54486, #73006, #60768, #23492 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555115631900E-007, 0.0009605145132141877100 ), + .UNSPECIFIED. ) ; +#31030 = ORIENTED_EDGE ( 'NONE', *, *, #16533, .T. ) ; +#31031 = ADVANCED_FACE ( 'NONE', ( #54262 ), #50336, .F. ) ; +#31032 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 68.50000000000002800, 2.454695999814380200 ) ) ; +#31033 = AXIS2_PLACEMENT_3D ( 'NONE', #70414, #20663, #26933 ) ; +#31034 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537160800, 90.34267608797586000, -28.20555803803014400 ) ) ; +#31035 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#31036 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 33.50000000000001400, 4.650848422521012700 ) ) ; +#31037 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298124000, 65.79999999999999700, -28.70555803802997700 ) ) ; +#31038 = EDGE_CURVE ( 'NONE', #52560, #49126, #70812, .T. ) ; +#31039 = FACE_OUTER_BOUND ( 'NONE', #80085, .T. ) ; +#31040 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#31041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31042 = CIRCLE ( 'NONE', #74478, 10.00000000000009600 ) ; +#31043 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 70.83333333333332900, -4.152999154772353500 ) ) ; +#31044 = ORIENTED_EDGE ( 'NONE', *, *, #26956, .T. ) ; +#31045 = ORIENTED_EDGE ( 'NONE', *, *, #57874, .T. ) ; +#31046 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31047 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 37.16545993132820800, -28.70555803802998100 ) ) ; +#31048 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 9.997474040497390700, -28.26641963845861100 ) ) ; +#31049 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31050 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 71.65075715145309200, -28.20555803802998100 ) ) ; +#31051 = LINE ( 'NONE', #67425, #64165 ) ; +#31052 = EDGE_LOOP ( 'NONE', ( #78680, #3058, #64185, #41327 ) ) ; +#31053 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567171400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#31054 = FACE_OUTER_BOUND ( 'NONE', #24002, .T. ) ; +#31055 = ORIENTED_EDGE ( 'NONE', *, *, #26655, .F. ) ; +#31057 = EDGE_CURVE ( 'NONE', #17957, #80062, #24459, .T. ) ; +#31056 = ORIENTED_EDGE ( 'NONE', *, *, #30257, .T. ) ; +#31058 = EDGE_CURVE ( 'NONE', #79184, #30084, #9987, .T. ) ; +#31059 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31060 = EDGE_LOOP ( 'NONE', ( #3657, #8334, #38923, #18772 ) ) ; +#31061 = CONICAL_SURFACE ( 'NONE', #76217, 10.00000000000009400, 0.7853981633974447300 ) ; +#31062 = ORIENTED_EDGE ( 'NONE', *, *, #15088, .T. ) ; +#31063 = EDGE_LOOP ( 'NONE', ( #47545, #37699, #46148 ) ) ; +#31064 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31065 = VERTEX_POINT ( 'NONE', #16987 ) ; +#31066 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 35.98096581827316200, -28.69431509262337300 ) ) ; +#31067 = EDGE_LOOP ( 'NONE', ( #63488, #21644, #64171, #5107 ) ) ; +#31068 = VERTEX_POINT ( 'NONE', #60530 ) ; +#31069 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 80.90050506338822300, -28.70555803802997700 ) ) ; +#31070 = EDGE_LOOP ( 'NONE', ( #69422, #47520, #50132, #66666 ) ) ; +#31071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31072 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#31073 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857159700, 57.92318720225497900, -28.70555803802997700 ) ) ; +#31074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31075 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488121600, 89.60439022488317600, -28.70555803803014400 ) ) ; +#31076 = AXIS2_PLACEMENT_3D ( 'NONE', #41947, #4686, #48176 ) ; +#31077 = VERTEX_POINT ( 'NONE', #23242 ) ; +#31078 = EDGE_CURVE ( 'NONE', #28617, #50540, #66934, .T. ) ; +#31079 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31080 = EDGE_CURVE ( 'NONE', #77911, #32933, #35784, .T. ) ; +#31081 = CARTESIAN_POINT ( 'NONE', ( -3.295822856858174400, 9.519451428761039200, -28.52576311647846600 ) ) ; +#31082 = EDGE_CURVE ( 'NONE', #44515, #45282, #19225, .T. ) ; +#31083 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11225, #10961, #79493, #17472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966650300, 0.0007670610367943145400 ), + .UNSPECIFIED. ) ; +#31084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31085 = CARTESIAN_POINT ( 'NONE', ( -8.783306465195837000, 60.79999999999999000, -28.32841359973437900 ) ) ; +#31086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31087 = EDGE_CURVE ( 'NONE', #32073, #29011, #33834, .T. ) ; +#31088 = VERTEX_POINT ( 'NONE', #79544 ) ; +#31089 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868715800, 61.58005252438382400, -28.24986299608867700 ) ) ; +#31090 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#31091 = FACE_OUTER_BOUND ( 'NONE', #47893, .T. ) ; +#31092 = AXIS2_PLACEMENT_3D ( 'NONE', #9704, #53206, #15960 ) ; +#31093 = EDGE_LOOP ( 'NONE', ( #74000, #32089, #36900, #57098 ) ) ; +#31094 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459546400, 59.08026449164335500, -28.70555803802997700 ) ) ; +#31095 = ORIENTED_EDGE ( 'NONE', *, *, #24288, .T. ) ; +#31096 = ORIENTED_EDGE ( 'NONE', *, *, #69164, .T. ) ; +#31097 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 84.37738371066736000, -28.70555803803030800 ) ) ; +#31098 = PLANE ( 'NONE', #23468 ) ; +#31099 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.760897458958879700, -28.36630947932767600 ) ) ; +#31100 = CIRCLE ( 'NONE', #11975, 10.00000000000009400 ) ; +#31101 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 50.19949493661175700, -28.70555803802996700 ) ) ; +#31102 = AXIS2_PLACEMENT_3D ( 'NONE', #23836, #67332, #30108 ) ; +#31103 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#31104 = AXIS2_PLACEMENT_3D ( 'NONE', #71948, #34684, #78196 ) ; +#31105 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999975100, 80.16749699759752400, -28.20555803803014400 ) ) ; +#31106 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31107 = EDGE_LOOP ( 'NONE', ( #68418, #75221, #46786 ) ) ; +#31108 = FACE_OUTER_BOUND ( 'NONE', #9031, .T. ) ; +#31109 = ORIENTED_EDGE ( 'NONE', *, *, #26573, .T. ) ; +#31110 = ADVANCED_FACE ( 'NONE', ( #718 ), #79574, .F. ) ; +#31111 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31112 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69388, #25899, #63165, #75645 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082060941500E-007, 0.001076191670833112600 ), + .UNSPECIFIED. ) ; +#31113 = VERTEX_POINT ( 'NONE', #61063 ) ; +#31114 = ORIENTED_EDGE ( 'NONE', *, *, #26650, .F. ) ; +#31115 = ADVANCED_FACE ( 'NONE', ( #48394 ), #46430, .T. ) ; +#31116 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 39.50000000000000700, 4.650848422521016300 ) ) ; +#31117 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 80.51916201875670300, -28.45106778992437700 ) ) ; +#31118 = AXIS2_PLACEMENT_3D ( 'NONE', #12478, #6212, #24985 ) ; +#31119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11740, #55502, #24503, #68016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101751034500, 0.0007596411030278615500 ), + .UNSPECIFIED. ) ; +#31120 = EDGE_CURVE ( 'NONE', #21102, #59880, #76285, .T. ) ; +#31121 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042380900, 11.09027028261017200, -28.70555803803005900 ) ) ; +#31122 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31123 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 49.74722181384564800, -28.70555803802999200 ) ) ; +#31124 = ADVANCED_FACE ( 'NONE', ( #65002 ), #13409, .F. ) ; +#31125 = CONICAL_SURFACE ( 'NONE', #12396, 10.50000000000009600, 0.7853981633974500600 ) ; +#31126 = CARTESIAN_POINT ( 'NONE', ( -2.254548258615115800, 49.59617684379259800, -28.64146614751466700 ) ) ; +#31127 = EDGE_CURVE ( 'NONE', #74788, #74996, #61863, .T. ) ; +#31128 = CONICAL_SURFACE ( 'NONE', #29128, 10.00000000000009600, 0.7853981633974447300 ) ; +#31129 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76433, #39443, #2172, #45659 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408024423000, 0.0006251342085512214900 ), + .UNSPECIFIED. ) ; +#31130 = AXIS2_PLACEMENT_3D ( 'NONE', #30982, #62254, #55974 ) ; +#31131 = ORIENTED_EDGE ( 'NONE', *, *, #65034, .F. ) ; +#31132 = AXIS2_PLACEMENT_3D ( 'NONE', #49198, #61242, #68002 ) ; +#31133 = ORIENTED_EDGE ( 'NONE', *, *, #75422, .F. ) ; +#31134 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 90.37705528805042800, -28.20555803803047800 ) ) ; +#31135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31137 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956800, 71.96823913367188700, -28.70555803803030800 ) ) ; +#31138 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 10.83333333333335000, -12.20555803803000600 ) ) ; +#31139 = CIRCLE ( 'NONE', #53453, 10.00000000000009200 ) ; +#31140 = ORIENTED_EDGE ( 'NONE', *, *, #42214, .T. ) ; +#31141 = CONICAL_SURFACE ( 'NONE', #33839, 10.00000000000009200, 0.7853981633974447300 ) ; +#31142 = AXIS2_PLACEMENT_3D ( 'NONE', #37118, #80662, #43378 ) ; +#31143 = ORIENTED_EDGE ( 'NONE', *, *, #41069, .T. ) ; +#31144 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#31145 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#31146 = CIRCLE ( 'NONE', #62654, 10.50000000000009800 ) ; +#31147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31148 = ORIENTED_EDGE ( 'NONE', *, *, #40681, .F. ) ; +#31149 = ORIENTED_EDGE ( 'NONE', *, *, #61970, .T. ) ; +#31150 = ORIENTED_EDGE ( 'NONE', *, *, #6234, .T. ) ; +#31151 = ORIENTED_EDGE ( 'NONE', *, *, #30351, .T. ) ; +#31152 = ORIENTED_EDGE ( 'NONE', *, *, #34091, .F. ) ; +#31153 = EDGE_LOOP ( 'NONE', ( #24938, #4896, #30048, #48105, #42949 ) ) ; +#31154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31155 = AXIS2_PLACEMENT_3D ( 'NONE', #62697, #75195, #68674 ) ; +#31156 = VERTEX_POINT ( 'NONE', #73824 ) ; +#31157 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29485, #41933, #60723, #23449 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572066413700E-007, 0.0007596410370205082100 ), + .UNSPECIFIED. ) ; +#31158 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31159 = ORIENTED_EDGE ( 'NONE', *, *, #61786, .F. ) ; +#31160 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31161 = FACE_OUTER_BOUND ( 'NONE', #59141, .T. ) ; +#31162 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#31163 = EDGE_CURVE ( 'NONE', #79234, #60180, #47339, .T. ) ; +#31164 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 45.33333333333334300, 3.124568980892187500 ) ) ; +#31165 = EDGE_LOOP ( 'NONE', ( #29449, #71775, #43219 ) ) ; +#31166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31167 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#31168 = VERTEX_POINT ( 'NONE', #30340 ) ; +#31169 = ORIENTED_EDGE ( 'NONE', *, *, #65420, .T. ) ; +#31170 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 47.66545993132820100, -28.70555803802998800 ) ) ; +#31171 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 57.22261628933269900, -28.70555803802997700 ) ) ; +#31172 = CARTESIAN_POINT ( 'NONE', ( 3.828585174340752400, 93.00673221364407100, -28.60974763495496400 ) ) ; +#31173 = CIRCLE ( 'NONE', #44626, 9.500000000000099500 ) ; +#31174 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#31175 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#31176 = VERTEX_POINT ( 'NONE', #25432 ) ; +#31177 = PLANE ( 'NONE', #47772 ) ; +#31178 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 81.43945992495501700, -28.34042301926918800 ) ) ; +#31179 = ORIENTED_EDGE ( 'NONE', *, *, #22654, .T. ) ; +#31180 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661480000, 20.60677350908857300, -28.30799595738880800 ) ) ; +#31181 = PLANE ( 'NONE', #4154 ) ; +#31182 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#31183 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#31184 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#31185 = EDGE_CURVE ( 'NONE', #46378, #10085, #32902, .T. ) ; +#31186 = CARTESIAN_POINT ( 'NONE', ( -17.03244381443369100, 53.20063685273899500, -28.49841021997938000 ) ) ; +#31187 = FACE_OUTER_BOUND ( 'NONE', #79917, .T. ) ; +#31188 = ORIENTED_EDGE ( 'NONE', *, *, #36387, .F. ) ; +#31189 = EDGE_CURVE ( 'NONE', #37818, #43060, #15342, .T. ) ; +#31190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31191 = ORIENTED_EDGE ( 'NONE', *, *, #3189, .F. ) ; +#31192 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148517700, 46.50238095238093200, -28.70555803802996700 ) ) ; +#31193 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31194 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.86203212531317100, -28.38801640354855500 ) ) ; +#31195 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528193500, 39.13131911501876200, -28.51286550264508400 ) ) ; +#31196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31197 = EDGE_CURVE ( 'NONE', #56207, #36042, #18463, .T. ) ; +#31198 = CARTESIAN_POINT ( 'NONE', ( 11.50207502155150200, 90.99854748491375700, -28.70555803803047500 ) ) ; +#31199 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31200 = ADVANCED_FACE ( 'NONE', ( #37700 ), #44466, .F. ) ; +#31201 = EDGE_CURVE ( 'NONE', #78096, #66678, #3990, .T. ) ; +#31202 = AXIS2_PLACEMENT_3D ( 'NONE', #31611, #75115, #37827 ) ; +#31203 = CIRCLE ( 'NONE', #27652, 9.500000000000095900 ) ; +#31204 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000016400, 40.90050506338822300, -28.70555803802997700 ) ) ; +#31205 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 51.66666666666667100, -6.705558038030000400 ) ) ; +#31206 = EDGE_LOOP ( 'NONE', ( #79799, #43287, #60971 ) ) ; +#31207 = ORIENTED_EDGE ( 'NONE', *, *, #32639, .F. ) ; +#31208 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72999, #66741, #23216, #35729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569918020500E-007, 0.0004669842289003384500 ), + .UNSPECIFIED. ) ; +#31209 = ADVANCED_FACE ( 'NONE', ( #61089 ), #11455, .T. ) ; +#31210 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 16.83333333333333600, 0.1341879241256075400 ) ) ; +#31211 = AXIS2_PLACEMENT_3D ( 'NONE', #7715, #13758, #57242 ) ; +#31212 = EDGE_CURVE ( 'NONE', #34397, #12259, #70301, .T. ) ; +#31213 = EDGE_CURVE ( 'NONE', #60721, #52657, #55833, .T. ) ; +#31214 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950500400, 17.69228657120669000, -28.53891855579992400 ) ) ; +#31215 = AXIS2_PLACEMENT_3D ( 'NONE', #11221, #5218, #48702 ) ; +#31216 = FACE_OUTER_BOUND ( 'NONE', #28037, .T. ) ; +#31217 = ORIENTED_EDGE ( 'NONE', *, *, #18555, .T. ) ; +#31218 = ORIENTED_EDGE ( 'NONE', *, *, #73027, .F. ) ; +#31219 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 61.56248377813448500, -28.32723995587591800 ) ) ; +#31220 = CIRCLE ( 'NONE', #33935, 9.500000000000099500 ) ; +#31221 = CARTESIAN_POINT ( 'NONE', ( 3.895746995818023500E-015, 57.46443389862720600, -28.54207364681941100 ) ) ; +#31222 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 19.16666666666667500, 1.741883078712356500 ) ) ; +#31223 = EDGE_LOOP ( 'NONE', ( #49737, #39867, #14817 ) ) ; +#31224 = ORIENTED_EDGE ( 'NONE', *, *, #49846, .T. ) ; +#31225 = ORIENTED_EDGE ( 'NONE', *, *, #75266, .F. ) ; +#31226 = CARTESIAN_POINT ( 'NONE', ( -4.720766503057853400, 90.09951448976265500, -28.63282631410022100 ) ) ; +#31227 = VERTEX_POINT ( 'NONE', #50929 ) ; +#31229 = ORIENTED_EDGE ( 'NONE', *, *, #63374, .T. ) ; +#31228 = EDGE_CURVE ( 'NONE', #65127, #23233, #41378, .T. ) ; +#31230 = AXIS2_PLACEMENT_3D ( 'NONE', #3792, #22306, #53583 ) ; +#31231 = AXIS2_PLACEMENT_3D ( 'NONE', #38955, #64035, #26764 ) ; +#31232 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451024800, 18.15930907398604800, -28.35186440610868200 ) ) ; +#31233 = ADVANCED_FACE ( 'NONE', ( #28019 ), #38417, .T. ) ; +#31234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31235 = CARTESIAN_POINT ( 'NONE', ( -5.383156030193842600, 86.79999999999785100, -28.70555803802997700 ) ) ; +#31236 = CONICAL_SURFACE ( 'NONE', #78120, 10.00000000000009200, 0.7853981633974447300 ) ; +#31237 = EDGE_LOOP ( 'NONE', ( #2163, #16948, #10669 ) ) ; +#31238 = EDGE_LOOP ( 'NONE', ( #28755, #60188, #69202, #8993 ) ) ; +#31239 = ORIENTED_EDGE ( 'NONE', *, *, #14478, .F. ) ; +#31240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31241 = VERTEX_POINT ( 'NONE', #44928 ) ; +#31242 = ORIENTED_EDGE ( 'NONE', *, *, #77749, .T. ) ; +#31243 = VERTEX_POINT ( 'NONE', #26513 ) ; +#31244 = AXIS2_PLACEMENT_3D ( 'NONE', #54791, #17551, #61080 ) ; +#31245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#31247 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 80.37705528805041400, -28.20555803803047800 ) ) ; +#31248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31249 = FACE_OUTER_BOUND ( 'NONE', #61432, .T. ) ; +#31250 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31251 = ORIENTED_EDGE ( 'NONE', *, *, #49353, .T. ) ; +#31252 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458388300, 41.01125751638925000, -28.53740755999541200 ) ) ; +#31253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2026, #51504, #51778, #14559 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693835898200E-007, 0.0008724363063893252400 ), + .UNSPECIFIED. ) ; +#31254 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 77.60073525436789100, -28.70555803802999500 ) ) ; +#31255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31256 = AXIS2_PLACEMENT_3D ( 'NONE', #14693, #58190, #20961 ) ; +#31257 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 22.66666666666668200, -8.133761268305512700 ) ) ; +#31258 = FACE_OUTER_BOUND ( 'NONE', #57037, .T. ) ; +#31259 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#31260 = ORIENTED_EDGE ( 'NONE', *, *, #20047, .T. ) ; +#31261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50995, #7496, #63576, #26316 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674213418179500E-007, 0.0007606607323827772800 ), + .UNSPECIFIED. ) ; +#31262 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49791, #12585, #56083, #18832 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726977500600, 0.0008135742306951431800 ), + .UNSPECIFIED. ) ; +#31263 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655694400, 38.92298334620754500, -28.20555803802996000 ) ) ; +#31264 = AXIS2_PLACEMENT_3D ( 'NONE', #34932, #10165, #53404 ) ; +#31265 = CARTESIAN_POINT ( 'NONE', ( 4.720766503057804500, 60.09951448976267600, -28.63282631410020300 ) ) ; +#31266 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567180300, 9.746602415621831400, -28.20555803802992800 ) ) ; +#31267 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 16.29444196196997700 ) ) ; +#31268 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#31269 = EDGE_CURVE ( 'NONE', #28926, #15131, #26951, .T. ) ; +#31270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78813, #35300, #10525, #54023 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389873878000E-007, 0.0008082646680357285700 ), + .UNSPECIFIED. ) ; +#31271 = CARTESIAN_POINT ( 'NONE', ( 4.386964939624815900E-015, 43.42856308690586100, -28.36981695106783600 ) ) ; +#31272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31274 = AXIS2_PLACEMENT_3D ( 'NONE', #59319, #65597, #53040 ) ; +#31275 = EDGE_LOOP ( 'NONE', ( #29349, #66963, #23783, #31376 ) ) ; +#31276 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#31277 = ORIENTED_EDGE ( 'NONE', *, *, #31647, .T. ) ; +#31278 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656961400, 60.65007990305426200, -28.43638873268705000 ) ) ; +#31279 = ORIENTED_EDGE ( 'NONE', *, *, #20956, .F. ) ; +#31280 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#31281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31282 = CARTESIAN_POINT ( 'NONE', ( 9.254657264815445900, 20.50380841767821500, -28.64142799534454700 ) ) ; +#31283 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042459000, 11.09027028261002600, -28.70555803802993500 ) ) ; +#31284 = ADVANCED_FACE ( 'NONE', ( #17285 ), #42550, .T. ) ; +#31285 = CIRCLE ( 'NONE', #185, 10.50000000000009600 ) ; +#31286 = ORIENTED_EDGE ( 'NONE', *, *, #43478, .T. ) ; +#31287 = ORIENTED_EDGE ( 'NONE', *, *, #22519, .F. ) ; +#31288 = EDGE_CURVE ( 'NONE', #22304, #10656, #12480, .T. ) ; +#31289 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#31290 = ORIENTED_EDGE ( 'NONE', *, *, #69846, .T. ) ; +#31291 = FACE_OUTER_BOUND ( 'NONE', #80245, .T. ) ; +#31292 = EDGE_CURVE ( 'NONE', #69213, #54282, #78815, .T. ) ; +#31293 = ORIENTED_EDGE ( 'NONE', *, *, #11419, .F. ) ; +#31294 = ORIENTED_EDGE ( 'NONE', *, *, #36058, .T. ) ; +#31296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6971, #716, #37972, #13267 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785990224300, 0.001246815221881941700 ), + .UNSPECIFIED. ) ; +#31295 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31297 = ORIENTED_EDGE ( 'NONE', *, *, #41932, .T. ) ; +#31298 = VERTEX_POINT ( 'NONE', #76505 ) ; +#31299 = ADVANCED_FACE ( 'NONE', ( #59114 ), #9461, .T. ) ; +#31300 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 66.33333333333334300, -5.535685056952199400 ) ) ; +#31301 = CONICAL_SURFACE ( 'NONE', #18701, 10.00000000000009400, 0.7853981633974447300 ) ; +#31302 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000001800, 57.22261628933269200, -28.70555803802997700 ) ) ; +#31303 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2869, #40138, #77406, #46354 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202209797400E-007, 0.0008724366121407012800 ), + .UNSPECIFIED. ) ; +#31304 = EDGE_CURVE ( 'NONE', #35044, #50285, #26046, .T. ) ; +#31305 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31306 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 31.33333333333333900, -8.133761268305512700 ) ) ; +#31307 = EDGE_CURVE ( 'NONE', #56481, #43133, #64375, .T. ) ; +#31308 = EDGE_LOOP ( 'NONE', ( #21087, #35400, #6549 ) ) ; +#31309 = CARTESIAN_POINT ( 'NONE', ( 10.34638331268032600, 8.297294629097113000, -28.56190306242184800 ) ) ; +#31310 = CIRCLE ( 'NONE', #27028, 10.50000000000009600 ) ; +#31311 = VERTEX_POINT ( 'NONE', #70525 ) ; +#31312 = ADVANCED_FACE ( 'NONE', ( #29976 ), #40610, .F. ) ; +#31313 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#31314 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#31315 = ORIENTED_EDGE ( 'NONE', *, *, #15190, .F. ) ; +#31316 = ADVANCED_FACE ( 'NONE', ( #63033 ), #7503, .F. ) ; +#31317 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 68.66666666666667100, 4.294441961969993400 ) ) ; +#31318 = ORIENTED_EDGE ( 'NONE', *, *, #7876, .T. ) ; +#31319 = EDGE_LOOP ( 'NONE', ( #22886, #17714, #24796 ) ) ; +#31320 = ORIENTED_EDGE ( 'NONE', *, *, #63078, .T. ) ; +#31321 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#31322 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260014500, 39.20034312068832300, -28.70555803803001600 ) ) ; +#31323 = CONICAL_SURFACE ( 'NONE', #68052, 10.00000000000009200, 0.7853981633974415100 ) ; +#31324 = AXIS2_PLACEMENT_3D ( 'NONE', #11599, #67343, #61390 ) ; +#31325 = EDGE_CURVE ( 'NONE', #34327, #79940, #31891, .T. ) ; +#31326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31327 = EDGE_CURVE ( 'NONE', #55672, #68193, #77611, .T. ) ; +#31328 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499836400, 69.83662311806159600, -28.37223523914914100 ) ) ; +#31329 = EDGE_CURVE ( 'NONE', #14827, #32815, #24090, .T. ) ; +#31330 = ADVANCED_FACE ( 'NONE', ( #75654 ), #5577, .F. ) ; +#31331 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31333 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31334 = AXIS2_PLACEMENT_3D ( 'NONE', #68950, #31711, #75210 ) ; +#31335 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#31336 = CIRCLE ( 'NONE', #50271, 9.500000000000099500 ) ; +#31337 = EDGE_LOOP ( 'NONE', ( #18104, #51941, #37293, #40877, #7444, #11178, #18119, #38926, #672 ) ) ; +#31338 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31339 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492457900, 40.89456479767169800, -28.70555803802996700 ) ) ; +#31340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31341 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873554800, 11.67955320215944900, -28.64059091698901900 ) ) ; +#31342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31343 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31345 = EDGE_CURVE ( 'NONE', #46777, #80546, #22130, .T. ) ; +#31346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31348 = AXIS2_PLACEMENT_3D ( 'NONE', #46179, #65288, #65006 ) ; +#31349 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31350 = AXIS2_PLACEMENT_3D ( 'NONE', #17386, #48356, #54638 ) ; +#31351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31352 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31353 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31354 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#31355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31357 = CARTESIAN_POINT ( 'NONE', ( -3.360497072202802900, 30.93250300240229200, -28.25438406275898700 ) ) ; +#31358 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 64.37738371066736000, -28.70555803803030800 ) ) ; +#31359 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671998600, 59.66414768974080100, -28.38420446581270100 ) ) ; +#31360 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2348, #45311, #21161, #64685 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061614900E-007, 0.001119323292485721600 ), + .UNSPECIFIED. ) ; +#31361 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120822000, 81.21901109451852100, -28.33427604305564900 ) ) ; +#31362 = ORIENTED_EDGE ( 'NONE', *, *, #28256, .F. ) ; +#31363 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312769300, 20.49769010897089000, -28.61774594593775900 ) ) ; +#31364 = ORIENTED_EDGE ( 'NONE', *, *, #10088, .F. ) ; +#31365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30845, #68091, #43318, #6078 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962240830300, 0.0005195704752304184000 ), + .UNSPECIFIED. ) ; +#31366 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31367 = AXIS2_PLACEMENT_3D ( 'NONE', #38273, #1029, #44513 ) ; +#31368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71920, #71645, #40894, #3612 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185221784471100E-007, 0.0006654852833079605900 ), + .UNSPECIFIED. ) ; +#31369 = CIRCLE ( 'NONE', #77287, 10.00000000000009200 ) ; +#31370 = AXIS2_PLACEMENT_3D ( 'NONE', #5207, #48693, #42447 ) ; +#31371 = ORIENTED_EDGE ( 'NONE', *, *, #7094, .T. ) ; +#31372 = FACE_OUTER_BOUND ( 'NONE', #55492, .T. ) ; +#31373 = VERTEX_POINT ( 'NONE', #27851 ) ; +#31374 = FACE_OUTER_BOUND ( 'NONE', #12004, .T. ) ; +#31375 = ORIENTED_EDGE ( 'NONE', *, *, #67865, .F. ) ; +#31376 = ORIENTED_EDGE ( 'NONE', *, *, #72065, .T. ) ; +#31377 = ORIENTED_EDGE ( 'NONE', *, *, #42518, .T. ) ; +#31378 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 37.33333333333334300, -5.205558038030008400 ) ) ; +#31379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31380 = AXIS2_PLACEMENT_3D ( 'NONE', #17296, #54556, #4769 ) ; +#31381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27466, #33698, #52433, #15199 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241079700, 0.0005195704752302074100 ), + .UNSPECIFIED. ) ; +#31382 = CIRCLE ( 'NONE', #48340, 10.50000000000009600 ) ; +#31383 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 90.69966441803890700, -28.70555803802997700 ) ) ; +#31384 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 39.35339758437810100, -28.20555803802995200 ) ) ; +#31385 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31386 = ADVANCED_FACE ( 'NONE', ( #38632 ), #62060, .T. ) ; +#31387 = VERTEX_POINT ( 'NONE', #65115 ) ; +#31388 = ORIENTED_EDGE ( 'NONE', *, *, #10742, .F. ) ; +#31389 = CYLINDRICAL_SURFACE ( 'NONE', #44112, 8.000000000000000000 ) ; +#31390 = AXIS2_PLACEMENT_3D ( 'NONE', #53671, #28166, #10171 ) ; +#31391 = VERTEX_POINT ( 'NONE', #21590 ) ; +#31392 = VERTEX_POINT ( 'NONE', #37261 ) ; +#31393 = EDGE_LOOP ( 'NONE', ( #27869, #49149, #73599 ) ) ; +#31394 = ORIENTED_EDGE ( 'NONE', *, *, #10551, .T. ) ; +#31395 = CIRCLE ( 'NONE', #44424, 7.500000000000000000 ) ; +#31396 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#31397 = EDGE_LOOP ( 'NONE', ( #17422, #76466, #23831 ) ) ; +#31398 = CONICAL_SURFACE ( 'NONE', #39313, 10.50000000000009600, 0.7853981633974500600 ) ; +#31399 = ADVANCED_FACE ( 'NONE', ( #73728 ), #20183, .F. ) ; +#31400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31401 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10367, #10632, #47854, #54125 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408024394300, 0.0006251342085511991600 ), + .UNSPECIFIED. ) ; +#31402 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124972500, 86.46717019299477200, -28.53914313452736500 ) ) ; +#31403 = PLANE ( 'NONE', #49977 ) ; +#31404 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 8.666666666666682100, 8.320721403598824400 ) ) ; +#31405 = VERTEX_POINT ( 'NONE', #12546 ) ; +#31406 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 20.44069092601379400, -28.35186440610856100 ) ) ; +#31407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31408 = EDGE_CURVE ( 'NONE', #27688, #56856, #36712, .T. ) ; +#31409 = CYLINDRICAL_SURFACE ( 'NONE', #67466, 10.00000000000000200 ) ; +#31410 = EDGE_LOOP ( 'NONE', ( #63363, #44719, #65424, #76574, #62676 ) ) ; +#31411 = ADVANCED_FACE ( 'NONE', ( #55205 ), #51256, .T. ) ; +#31412 = EDGE_CURVE ( 'NONE', #63070, #74850, #53259, .T. ) ; +#31413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31414 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970300, 63.65857157145682500, -28.20555803803047800 ) ) ; +#31415 = PLANE ( 'NONE', #40166 ) ; +#31416 = EDGE_CURVE ( 'NONE', #75589, #9664, #67864, .T. ) ; +#31417 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609688800, 70.13716795162660800, -28.48697406221658900 ) ) ; +#31418 = ADVANCED_FACE ( 'NONE', ( #69799 ), #49322, .F. ) ; +#31419 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 64.83849307182666200, -28.68631150211663400 ) ) ; +#31420 = EDGE_CURVE ( 'NONE', #4187, #10148, #65931, .T. ) ; +#31421 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811642300, 9.894351187922357100, -28.41114655922298500 ) ) ; +#31422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31423 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 43.16666666666667900, -6.205558038030004800 ) ) ; +#31424 = EDGE_CURVE ( 'NONE', #21270, #47941, #49820, .T. ) ; +#31425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31426 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650639500, 28.58087956867520400, -28.30223257055572400 ) ) ; +#31427 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 70.34267608797553400, -28.20555803803047800 ) ) ; +#31428 = ORIENTED_EDGE ( 'NONE', *, *, #43419, .F. ) ; +#31429 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528300, 14.05000000000000200, -28.20555803802992800 ) ) ; +#31430 = ORIENTED_EDGE ( 'NONE', *, *, #25003, .F. ) ; +#31431 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 90.58127875436078100, -28.53757464917570600 ) ) ; +#31432 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528172200, 49.63131911501876200, -28.51286550264510200 ) ) ; +#31433 = ADVANCED_FACE ( 'NONE', ( #57172 ), #80516, .T. ) ; +#31434 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660889700, 90.13716795162605400, -28.48697406221735000 ) ) ; +#31435 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#31436 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#31437 = AXIS2_PLACEMENT_3D ( 'NONE', #16771, #54020, #29068 ) ; +#31438 = EDGE_CURVE ( 'NONE', #45282, #58618, #35428, .T. ) ; +#31439 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#31440 = EDGE_CURVE ( 'NONE', #14661, #426, #20963, .T. ) ; +#31441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40958, #3948, #22736, #66264 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#31442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31443 = EDGE_CURVE ( 'NONE', #55213, #22761, #6477, .T. ) ; +#31444 = VERTEX_POINT ( 'NONE', #25870 ) ; +#31445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31446 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 32.93454006867177200, -28.70555803802998800 ) ) ; +#31447 = CONICAL_SURFACE ( 'NONE', #27753, 10.00000000000009400, 0.7853981633974447300 ) ; +#31448 = VERTEX_POINT ( 'NONE', #13636 ) ; +#31449 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000042100, 68.39962244433165500, -28.53664883431660100 ) ) ; +#31450 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428212400, 51.52858243452108400, -28.70555803803014400 ) ) ; +#31451 = FACE_OUTER_BOUND ( 'NONE', #78807, .T. ) ; +#31452 = EDGE_LOOP ( 'NONE', ( #58798, #1653, #14208, #16954 ) ) ; +#31453 = AXIS2_PLACEMENT_3D ( 'NONE', #57055, #19792, #63331 ) ; +#31454 = ORIENTED_EDGE ( 'NONE', *, *, #3051, .F. ) ; +#31455 = CONICAL_SURFACE ( 'NONE', #5878, 10.00000000000009200, 0.7853981633974447300 ) ; +#31456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31458 = ORIENTED_EDGE ( 'NONE', *, *, #5432, .F. ) ; +#31457 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707777600, 59.93589406416700900, -28.68054222049973800 ) ) ; +#31459 = ORIENTED_EDGE ( 'NONE', *, *, #46366, .T. ) ; +#31460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31461 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#31462 = AXIS2_PLACEMENT_3D ( 'NONE', #79559, #36033, #11293 ) ; +#31463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31464 = AXIS2_PLACEMENT_3D ( 'NONE', #31808, #75315, #38023 ) ; +#31465 = PLANE ( 'NONE', #58716 ) ; +#31466 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285725100, 57.92318720225497900, -28.70555803802997700 ) ) ; +#31467 = FACE_OUTER_BOUND ( 'NONE', #68867, .T. ) ; +#31468 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#31469 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841389500, 39.16349705304865800, -28.30782889147481300 ) ) ; +#31470 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32099, #69345, #38316, #1071 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037045122298422900E-007, 0.0004669856434892229500 ), + .UNSPECIFIED. ) ; +#31471 = ORIENTED_EDGE ( 'NONE', *, *, #52136, .T. ) ; +#31472 = CIRCLE ( 'NONE', #19635, 10.00000000000009400 ) ; +#31473 = EDGE_LOOP ( 'NONE', ( #30993, #76636, #50161, #21489 ) ) ; +#31474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31475 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 49.50000000000000700, 6.847000845227641200 ) ) ; +#31476 = ORIENTED_EDGE ( 'NONE', *, *, #47322, .T. ) ; +#31477 = ORIENTED_EDGE ( 'NONE', *, *, #60685, .T. ) ; +#31478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31479 = ORIENTED_EDGE ( 'NONE', *, *, #77559, .T. ) ; +#31480 = CIRCLE ( 'NONE', #48126, 9.500000000000097700 ) ; +#31481 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 14.66666666666668000, -3.705558038030004400 ) ) ; +#31482 = EDGE_LOOP ( 'NONE', ( #1125, #54828, #16433 ) ) ; +#31483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31484 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43708, #220, #12768, #56238 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815776866200E-007, 0.0007763385940576976800 ), + .UNSPECIFIED. ) ; +#31485 = ORIENTED_EDGE ( 'NONE', *, *, #2370, .F. ) ; +#31486 = ORIENTED_EDGE ( 'NONE', *, *, #50624, .T. ) ; +#31487 = VERTEX_POINT ( 'NONE', #63405 ) ; +#31488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31489 = EDGE_CURVE ( 'NONE', #27170, #11157, #18234, .T. ) ; +#31490 = CIRCLE ( 'NONE', #8055, 10.50000000000009600 ) ; +#31491 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 17.00000000000000700, -1.205558038030002800 ) ) ; +#31492 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6554, #62334, #19060, #62589 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001043664170964423100 ), + .UNSPECIFIED. ) ; +#31493 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#31494 = AXIS2_PLACEMENT_3D ( 'NONE', #59692, #22155, #16171 ) ; +#31495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31497 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64672, #52092, #70345, #27407, #70892, #33638 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.469446951953614200E-018, 0.001929763249978143800, 0.003859526499956284100 ), + .UNSPECIFIED. ) ; +#31498 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#31499 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492351700, 58.56055603621138800, -28.70555803803001300 ) ) ; +#31500 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100658200, 28.12363993080087000, -28.38670679782166700 ) ) ; +#31501 = AXIS2_PLACEMENT_3D ( 'NONE', #5136, #48624, #11410 ) ; +#31502 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#31503 = CONICAL_SURFACE ( 'NONE', #26864, 10.50000000000009600, 0.7853981633974500600 ) ; +#31504 = ADVANCED_FACE ( 'NONE', ( #71779 ), #30879, .F. ) ; +#31505 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 36.94142842854307000, -28.20555803802995200 ) ) ; +#31506 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995689900, 14.98096581827296500, -28.69431509262338100 ) ) ; +#31507 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#31508 = CARTESIAN_POINT ( 'NONE', ( -11.80141306497121300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#31509 = VERTEX_POINT ( 'NONE', #7589 ) ; +#31510 = ADVANCED_FACE ( 'NONE', ( #34791 ), #78583, .T. ) ; +#31511 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#31512 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148344500, 44.59761904761938200, -28.70555803802996700 ) ) ; +#31513 = AXIS2_PLACEMENT_3D ( 'NONE', #23816, #67320, #30093 ) ; +#31514 = EDGE_LOOP ( 'NONE', ( #50020, #30077, #38137 ) ) ; +#31515 = ADVANCED_FACE ( 'NONE', ( #47375 ), #26421, .T. ) ; +#31516 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#31518 = CARTESIAN_POINT ( 'NONE', ( -15.04069429212270100, 9.918611415754588400, -28.70555803803001300 ) ) ; +#31517 = CARTESIAN_POINT ( 'NONE', ( -9.769169305343021700, 80.65007990305429100, -28.43638873268705700 ) ) ; +#31519 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999991700, 10.46823913367206800, -28.70555803802994200 ) ) ; +#31520 = CONICAL_SURFACE ( 'NONE', #32369, 10.50000000000009600, 0.7853981633974482800 ) ; +#31521 = ORIENTED_EDGE ( 'NONE', *, *, #34643, .T. ) ; +#31522 = CIRCLE ( 'NONE', #7025, 10.50000000000009600 ) ; +#31523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31525 = EDGE_CURVE ( 'NONE', #40650, #79578, #72814, .T. ) ; +#31524 = ORIENTED_EDGE ( 'NONE', *, *, #29538, .F. ) ; +#31526 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 20.50000000000000400, 4.650848422521016300 ) ) ; +#31527 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#31528 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477741100, 28.88589569235280800, -28.27354076558353700 ) ) ; +#31529 = FACE_OUTER_BOUND ( 'NONE', #68438, .T. ) ; +#31530 = ORIENTED_EDGE ( 'NONE', *, *, #20666, .T. ) ; +#31531 = VERTEX_POINT ( 'NONE', #57649 ) ; +#31532 = ORIENTED_EDGE ( 'NONE', *, *, #53934, .T. ) ; +#31533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31534 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#31535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31537 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16229, #53486, #22480, #66007 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721147400, 0.0008252574424209045200 ), + .UNSPECIFIED. ) ; +#31538 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252816500, 49.63131911501876200, -28.51286550264511300 ) ) ; +#31539 = FACE_OUTER_BOUND ( 'NONE', #5127, .T. ) ; +#31540 = ORIENTED_EDGE ( 'NONE', *, *, #26307, .F. ) ; +#31541 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533151800, 17.80869142985016000, -28.37223374938538000 ) ) ; +#31542 = EDGE_CURVE ( 'NONE', #23119, #8218, #58341, .T. ) ; +#31543 = CONICAL_SURFACE ( 'NONE', #80045, 10.00000000000009200, 0.7853981633974447300 ) ; +#31544 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489671700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#31545 = EDGE_CURVE ( 'NONE', #65973, #78459, #43843, .T. ) ; +#31546 = ORIENTED_EDGE ( 'NONE', *, *, #73560, .F. ) ; +#31547 = ORIENTED_EDGE ( 'NONE', *, *, #60621, .T. ) ; +#31548 = VERTEX_POINT ( 'NONE', #20675 ) ; +#31549 = CARTESIAN_POINT ( 'NONE', ( -2.881082274201281400, 71.10238820582966900, -28.32098513914475600 ) ) ; +#31550 = ORIENTED_EDGE ( 'NONE', *, *, #14975, .T. ) ; +#31551 = CARTESIAN_POINT ( 'NONE', ( -9.279233496942035600, 80.09951448976264000, -28.63282631410026000 ) ) ; +#31552 = LINE ( 'NONE', #24498, #29621 ) ; +#31553 = AXIS2_PLACEMENT_3D ( 'NONE', #70333, #33082, #76590 ) ; +#31554 = EDGE_CURVE ( 'NONE', #16467, #31392, #1656, .T. ) ; +#31555 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146657300, 10.29130857014956700, -28.37223374938505000 ) ) ; +#31556 = EDGE_CURVE ( 'NONE', #1214, #43735, #16286, .T. ) ; +#31557 = EDGE_CURVE ( 'NONE', #1875, #53090, #32802, .T. ) ; +#31558 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280410500, 67.94142842854297700, -28.37229765499284900 ) ) ; +#31559 = ORIENTED_EDGE ( 'NONE', *, *, #75124, .T. ) ; +#31560 = AXIS2_PLACEMENT_3D ( 'NONE', #62621, #13137, #56615 ) ; +#31561 = ORIENTED_EDGE ( 'NONE', *, *, #19482, .F. ) ; +#31562 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#31563 = CARTESIAN_POINT ( 'NONE', ( -11.74546181355821200, 28.59617548195244300, -28.64146967277531900 ) ) ; +#31564 = ORIENTED_EDGE ( 'NONE', *, *, #28483, .F. ) ; +#31565 = CIRCLE ( 'NONE', #4385, 10.00000000000009200 ) ; +#31566 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548998800, 18.15930907398571700, -28.35186440610893000 ) ) ; +#31567 = AXIS2_PLACEMENT_3D ( 'NONE', #51348, #14148, #57644 ) ; +#31568 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 64.16666666666667100, 3.794441961969996900 ) ) ; +#31569 = AXIS2_PLACEMENT_3D ( 'NONE', #49900, #12703, #56179 ) ; +#31570 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73966, #30459, #11948, #55436 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003987153605061255700, 0.004414112765716552200 ), + .UNSPECIFIED. ) ; +#31571 = AXIS2_PLACEMENT_3D ( 'NONE', #80752, #43470, #6231 ) ; +#31572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31574 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 29.16666666666665700, 6.794441961969992500 ) ) ; +#31575 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 101.5999999999999900, -18.70555803802999200 ) ) ; +#31576 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567176700, 20.24660241562181900, -28.20555803802994200 ) ) ; +#31577 = CONICAL_SURFACE ( 'NONE', #39836, 10.50000000000009600, 0.7853981633974482800 ) ; +#31578 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 66.50000000000001400, -9.258116921287651700 ) ) ; +#31579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69118, #31875, #38088, #837 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466051880642400E-007, 0.0002929914227452641800 ), + .UNSPECIFIED. ) ; +#31580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31581 = CARTESIAN_POINT ( 'NONE', ( -17.31601142792133900, 39.47675710338220500, -28.43415153258097700 ) ) ; +#31582 = VERTEX_POINT ( 'NONE', #51628 ) ; +#31583 = AXIS2_PLACEMENT_3D ( 'NONE', #41431, #47656, #78724 ) ; +#31584 = EDGE_CURVE ( 'NONE', #36988, #33226, #63988, .T. ) ; +#31585 = ORIENTED_EDGE ( 'NONE', *, *, #62757, .T. ) ; +#31586 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410172600, 61.13951010012863200, -28.36889022317260300 ) ) ; +#31587 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511904600, 61.99560977511664100, -28.70555803802997700 ) ) ; +#31588 = ORIENTED_EDGE ( 'NONE', *, *, #27859, .T. ) ; +#31589 = ADVANCED_FACE ( 'NONE', ( #28972 ), #2419, .T. ) ; +#31590 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#31591 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#31592 = CIRCLE ( 'NONE', #45318, 10.00000000000009400 ) ; +#31593 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609824300, 51.46283204837368400, -28.48697406221626200 ) ) ; +#31594 = ORIENTED_EDGE ( 'NONE', *, *, #58072, .F. ) ; +#31595 = CIRCLE ( 'NONE', #15850, 9.500000000000097700 ) ; +#31596 = VERTEX_POINT ( 'NONE', #45639 ) ; +#31597 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#31598 = EDGE_CURVE ( 'NONE', #35598, #25126, #12386, .T. ) ; +#31599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31600 = ORIENTED_EDGE ( 'NONE', *, *, #4478, .F. ) ; +#31601 = CIRCLE ( 'NONE', #29281, 10.00000000000009400 ) ; +#31602 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743472000, 22.66464174796073600, -28.53896444442200000 ) ) ; +#31603 = CONICAL_SURFACE ( 'NONE', #40840, 10.00000000000009400, 0.7853981633974447300 ) ; +#31604 = AXIS2_PLACEMENT_3D ( 'NONE', #66396, #47586, #60150 ) ; +#31605 = VERTEX_POINT ( 'NONE', #64757 ) ; +#31606 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31607 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906779700, 89.92963663972541600, -28.27338767626451600 ) ) ; +#31608 = ORIENTED_EDGE ( 'NONE', *, *, #79449, .F. ) ; +#31609 = ORIENTED_EDGE ( 'NONE', *, *, #50084, .T. ) ; +#31610 = ADVANCED_FACE ( 'NONE', ( #62028 ), #74659, .F. ) ; +#31611 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#31612 = PLANE ( 'NONE', #26792 ) ; +#31613 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24272, #61555, #43013, #5773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723656800, 0.0008252574424211546500 ), + .UNSPECIFIED. ) ; +#31614 = FACE_OUTER_BOUND ( 'NONE', #51980, .T. ) ; +#31615 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#31616 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#31617 = VERTEX_POINT ( 'NONE', #15217 ) ; +#31618 = AXIS2_PLACEMENT_3D ( 'NONE', #1347, #44844, #7600 ) ; +#31619 = FACE_OUTER_BOUND ( 'NONE', #34039, .T. ) ; +#31620 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31621 = EDGE_LOOP ( 'NONE', ( #77557, #17019, #70631, #28306, #6539, #28352 ) ) ; +#31622 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995705000, 44.61903418172678200, -28.69431509262337700 ) ) ; +#31623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31624 = ORIENTED_EDGE ( 'NONE', *, *, #74534, .T. ) ; +#31625 = VERTEX_POINT ( 'NONE', #21501 ) ; +#31626 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31627 = ORIENTED_EDGE ( 'NONE', *, *, #59320, .T. ) ; +#31628 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.10252595950260000, -28.26641963845862900 ) ) ; +#31629 = ORIENTED_EDGE ( 'NONE', *, *, #31987, .T. ) ; +#31630 = CIRCLE ( 'NONE', #57456, 10.00000000000009200 ) ; +#31631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31632 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465400, 39.10230989102910100, -28.61774594594332300 ) ) ; +#31633 = AXIS2_PLACEMENT_3D ( 'NONE', #39970, #2672, #46189 ) ; +#31634 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31635 = ORIENTED_EDGE ( 'NONE', *, *, #2924, .F. ) ; +#31636 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 101.5999999999999900, 16.29444196196997300 ) ) ; +#31637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31638 = ADVANCED_FACE ( 'NONE', ( #45409 ), #41555, .F. ) ; +#31639 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10426, #47646, #29239, #72720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866745618100E-007, 0.001076778502991527100 ), + .UNSPECIFIED. ) ; +#31640 = VERTEX_POINT ( 'NONE', #33982 ) ; +#31641 = EDGE_CURVE ( 'NONE', #78459, #38367, #58096, .T. ) ; +#31642 = ORIENTED_EDGE ( 'NONE', *, *, #76463, .F. ) ; +#31643 = CONICAL_SURFACE ( 'NONE', #687, 10.00000000000009200, 0.7853981633974447300 ) ; +#31644 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 35.16666666666664300, 0.9380355014189834000 ) ) ; +#31645 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31647 = EDGE_CURVE ( 'NONE', #59554, #8014, #10430, .T. ) ; +#31648 = CIRCLE ( 'NONE', #47517, 10.00000000000009400 ) ; +#31649 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153423900, 60.80000000000002600, -28.55171188418382000 ) ) ; +#31650 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74086, #67819, #24309, #80328 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397414700, 0.001517194977239359500 ), + .UNSPECIFIED. ) ; +#31651 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999992600, -28.20555803803005900 ) ) ; +#31652 = ORIENTED_EDGE ( 'NONE', *, *, #6265, .T. ) ; +#31653 = CIRCLE ( 'NONE', #15042, 10.00000000000009200 ) ; +#31654 = AXIS2_PLACEMENT_3D ( 'NONE', #33503, #77014, #39747 ) ; +#31655 = EDGE_CURVE ( 'NONE', #38499, #63102, #43485, .T. ) ; +#31656 = ORIENTED_EDGE ( 'NONE', *, *, #67568, .T. ) ; +#31657 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31658 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571447500, 49.57141756547891700, -28.70555803802996700 ) ) ; +#31659 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 61.43945992495501700, -28.34042301926910000 ) ) ; +#31660 = CARTESIAN_POINT ( 'NONE', ( -10.62849472960806600, 71.43250300240228500, -28.25053119339279900 ) ) ; +#31661 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919795100, 18.37705528805047100, -28.20555803803042500 ) ) ; +#31662 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 6.500000000000005300, -9.258116921287651700 ) ) ; +#31663 = EDGE_CURVE ( 'NONE', #76297, #72305, #60082, .T. ) ; +#31664 = FACE_OUTER_BOUND ( 'NONE', #34717, .T. ) ; +#31665 = AXIS2_PLACEMENT_3D ( 'NONE', #72550, #78809, #29067 ) ; +#31666 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 90.34267608797567600, -28.20555803802997700 ) ) ; +#31667 = FACE_OUTER_BOUND ( 'NONE', #27163, .T. ) ; +#31668 = ORIENTED_EDGE ( 'NONE', *, *, #45094, .F. ) ; +#31669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31670 = FACE_OUTER_BOUND ( 'NONE', #60992, .T. ) ; +#31671 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#31672 = ORIENTED_EDGE ( 'NONE', *, *, #76809, .F. ) ; +#31673 = CARTESIAN_POINT ( 'NONE', ( 16.92871258168493400, 6.141617642644575000, -27.93217229385482300 ) ) ; +#31674 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31675 = VERTEX_POINT ( 'NONE', #21750 ) ; +#31676 = AXIS2_PLACEMENT_3D ( 'NONE', #33356, #76869, #39603 ) ; +#31677 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#31678 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609431200, 61.46283204837340000, -28.48697406221666700 ) ) ; +#31679 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189904200, 17.62363993080124300, -28.38670679782144300 ) ) ; +#31680 = EDGE_CURVE ( 'NONE', #29591, #37106, #29467, .T. ) ; +#31681 = FACE_OUTER_BOUND ( 'NONE', #28557, .T. ) ; +#31682 = EDGE_CURVE ( 'NONE', #44921, #52508, #14953, .T. ) ; +#31683 = ADVANCED_FACE ( 'NONE', ( #76584 ), #59551, .T. ) ; +#31684 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#31687 = CIRCLE ( 'NONE', #39281, 10.00000000000009200 ) ; +#31686 = AXIS2_PLACEMENT_3D ( 'NONE', #44463, #44724, #69525 ) ; +#31685 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274641600, 87.93535825203927900, -28.53896444442226600 ) ) ; +#31688 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.79999999999951400, -28.20555803803047800 ) ) ; +#31689 = VERTEX_POINT ( 'NONE', #40764 ) ; +#31690 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 41.00000000000000700, 3.794441961969998300 ) ) ; +#31691 = VERTEX_POINT ( 'NONE', #72078 ) ; +#31692 = ORIENTED_EDGE ( 'NONE', *, *, #25343, .F. ) ; +#31693 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528193500, 39.13131911501876200, -28.51286550264508400 ) ) ; +#31694 = ORIENTED_EDGE ( 'NONE', *, *, #71954, .T. ) ; +#31695 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 90.34267608797551900, -28.20555803803014400 ) ) ; +#31696 = ORIENTED_EDGE ( 'NONE', *, *, #23210, .F. ) ; +#31697 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31698 = EDGE_CURVE ( 'NONE', #63610, #78429, #478, .T. ) ; +#31699 = CARTESIAN_POINT ( 'NONE', ( 19.87881462457957200, 101.3576292491596100, -20.96673806103189700 ) ) ; +#31700 = ADVANCED_FACE ( 'NONE', ( #72722 ), #6512, .T. ) ; +#31701 = CIRCLE ( 'NONE', #61513, 10.00000000000009600 ) ; +#31702 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142856777800, 73.67681279774481600, -28.70555803803014400 ) ) ; +#31703 = AXIS2_PLACEMENT_3D ( 'NONE', #15356, #58857, #21621 ) ; +#31705 = EDGE_LOOP ( 'NONE', ( #19025, #62689, #13771, #25122 ) ) ; +#31704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31706 = AXIS2_PLACEMENT_3D ( 'NONE', #11107, #60886, #48324 ) ; +#31707 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223625300, 89.83407839971525300, -28.37510699173782000 ) ) ; +#31708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31709 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75226, #50421, #69245, #31981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.868354362588068000E-017, 0.001179148174663081600 ), + .UNSPECIFIED. ) ; +#31711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31712 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#31713 = CIRCLE ( 'NONE', #25860, 9.500000000000097700 ) ; +#31714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31715 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003900, 71.23796787468685900, -28.38801640354854800 ) ) ; +#31716 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.79722425778841500, -28.32715733700493700 ) ) ; +#31717 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700700, 44.61903418172683900, -28.69431509262337700 ) ) ; +#31718 = ADVANCED_FACE ( 'NONE', ( #8439 ), #54193, .F. ) ; +#31719 = EDGE_LOOP ( 'NONE', ( #78693, #24711, #32888 ) ) ; +#31720 = ADVANCED_FACE ( 'NONE', ( #23077 ), #21129, .F. ) ; +#31721 = CONICAL_SURFACE ( 'NONE', #1160, 10.00000000000009200, 0.7853981633974447300 ) ; +#31722 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189000, 49.23827450271716800, -28.47230003642277300 ) ) ; +#31723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31724 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467680500, 30.26893971292316000, -28.57333386111099600 ) ) ; +#31725 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#31726 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 51.43250300240229900, -28.20555803802997700 ) ) ; +#31727 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 61.43650294695131500, -28.30782889147482400 ) ) ; +#31728 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540451800, 52.51973550835661800, -28.70555803802997700 ) ) ; +#31729 = ADVANCED_FACE ( 'NONE', ( #70737 ), #68799, .T. ) ; +#31730 = AXIS2_PLACEMENT_3D ( 'NONE', #49587, #12393, #55874 ) ; +#31731 = FACE_OUTER_BOUND ( 'NONE', #62508, .T. ) ; +#31732 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 47.33333333333334300, -10.73183747965883100 ) ) ; +#31733 = CIRCLE ( 'NONE', #10827, 9.500000000000099500 ) ; +#31734 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868442900, 18.51513784120221100, -28.32821106612154300 ) ) ; +#31735 = EDGE_LOOP ( 'NONE', ( #44159, #71889, #64509, #49985 ) ) ; +#31736 = CONICAL_SURFACE ( 'NONE', #37901, 10.00000000000009200, 0.7853981633974447300 ) ; +#31737 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 12.50000000000001200, 2.454695999814380200 ) ) ; +#31738 = ORIENTED_EDGE ( 'NONE', *, *, #80739, .T. ) ; +#31739 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 71.43250300240228500, -28.20555803802997700 ) ) ; +#31740 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 28.53751622186545900, -28.32723995587591000 ) ) ; +#31741 = EDGE_CURVE ( 'NONE', #53164, #53190, #66829, .T. ) ; +#31742 = CIRCLE ( 'NONE', #46271, 10.00000000000009200 ) ; +#31743 = CIRCLE ( 'NONE', #64264, 10.00000000000009400 ) ; +#31744 = ORIENTED_EDGE ( 'NONE', *, *, #32352, .F. ) ; +#31745 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463300, 90.22161678501180400, -28.29547179040444100 ) ) ; +#31746 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 14.83333333333334500, -4.152999154772353500 ) ) ; +#31747 = CIRCLE ( 'NONE', #42665, 10.00000000000009200 ) ; +#31748 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333800, 45.55000000000000400, -28.70555803802996700 ) ) ; +#31749 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47933, #23224, #41972, #4707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283332893300, 0.0007287255810282131200 ), + .UNSPECIFIED. ) ; +#31750 = EDGE_LOOP ( 'NONE', ( #41323, #37816, #37136, #16008 ) ) ; +#31751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31752 = EDGE_LOOP ( 'NONE', ( #69882, #64809, #19836 ) ) ; +#31753 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725287000, 35.36787096422376900, -28.37244029424743600 ) ) ; +#31754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31756 = FACE_OUTER_BOUND ( 'NONE', #21629, .T. ) ; +#31757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31758 = CARTESIAN_POINT ( 'NONE', ( 6.100334448160444000, 70.79999999999982700, -28.20555803803005200 ) ) ; +#31759 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576916500, 45.54999999999999700, -28.65220501466659500 ) ) ; +#31760 = FACE_OUTER_BOUND ( 'NONE', #23126, .T. ) ; +#31761 = ORIENTED_EDGE ( 'NONE', *, *, #4374, .F. ) ; +#31762 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279000, 39.35339758437808700, -28.20555803802995200 ) ) ; +#31763 = EDGE_CURVE ( 'NONE', #23151, #3009, #52311, .T. ) ; +#31764 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31765 = EDGE_LOOP ( 'NONE', ( #61038, #444, #22965, #11731 ) ) ; +#31766 = VERTEX_POINT ( 'NONE', #53808 ) ; +#31767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31768 = EDGE_CURVE ( 'NONE', #3997, #15529, #37866, .T. ) ; +#31769 = EDGE_LOOP ( 'NONE', ( #38906, #44667, #11647 ) ) ; +#31770 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.89610994602603700, -28.37519436813183300 ) ) ; +#31771 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999932500, 67.46443389862696400, -28.54207364681962400 ) ) ; +#31772 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431100, 20.67701665379226500, -28.20555803802994200 ) ) ; +#31773 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543119400, 39.23522516708109700, -28.27573853395003700 ) ) ; +#31774 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#31775 = CIRCLE ( 'NONE', #38553, 10.50000000000009600 ) ; +#31776 = FACE_OUTER_BOUND ( 'NONE', #46893, .T. ) ; +#31777 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 33.87738371066728100, -28.70555803802996700 ) ) ; +#31778 = VERTEX_POINT ( 'NONE', #23094 ) ; +#31779 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#31780 = EDGE_CURVE ( 'NONE', #26473, #10766, #26986, .T. ) ; +#31781 = ADVANCED_FACE ( 'NONE', ( #25021 ), #19150, .T. ) ; +#31783 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199000, 51.25732391202399200, -28.20555803802997700 ) ) ; +#31782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31784 = EDGE_CURVE ( 'NONE', #4131, #11483, #23436, .T. ) ; +#31785 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195964100, 83.65857157145700300, -28.37229765499279600 ) ) ; +#31786 = FACE_OUTER_BOUND ( 'NONE', #14048, .T. ) ; +#31787 = AXIS2_PLACEMENT_3D ( 'NONE', #54739, #11256, #67269 ) ; +#31788 = ORIENTED_EDGE ( 'NONE', *, *, #20570, .F. ) ; +#31789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31790 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 18.33333333333333900, -5.205558038030008400 ) ) ; +#31791 = VERTEX_POINT ( 'NONE', #42084 ) ; +#31792 = CIRCLE ( 'NONE', #14178, 10.00000000000009400 ) ; +#31793 = FACE_OUTER_BOUND ( 'NONE', #54301, .T. ) ; +#31794 = ADVANCED_FACE ( 'NONE', ( #35714 ), #79390, .T. ) ; +#31795 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826525100, 31.14948861668596800, -28.33414295261581400 ) ) ; +#31796 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 51.62753447840813700, -28.38801640354866900 ) ) ; +#31797 = AXIS2_PLACEMENT_3D ( 'NONE', #8398, #14690, #33181 ) ; +#31798 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#31799 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#31800 = EDGE_CURVE ( 'NONE', #33342, #4678, #8931, .T. ) ; +#31802 = ORIENTED_EDGE ( 'NONE', *, *, #67502, .T. ) ; +#31801 = EDGE_CURVE ( 'NONE', #26040, #60285, #52211, .T. ) ; +#31803 = EDGE_CURVE ( 'NONE', #14906, #36888, #56135, .T. ) ; +#31804 = AXIS2_PLACEMENT_3D ( 'NONE', #15301, #21577, #52531 ) ; +#31805 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050736700, 49.07379779496234600, -28.70555803802996700 ) ) ; +#31806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31807 = AXIS2_PLACEMENT_3D ( 'NONE', #47384, #10168, #53668 ) ; +#31808 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#31809 = FACE_OUTER_BOUND ( 'NONE', #16092, .T. ) ; +#31810 = ORIENTED_EDGE ( 'NONE', *, *, #27056, .T. ) ; +#31811 = ADVANCED_FACE ( 'NONE', ( #37622 ), #637, .T. ) ; +#31812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8516, #33560, #52287, #15068 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178555656300E-007, 0.0005050261270277864000 ), + .UNSPECIFIED. ) ; +#31813 = FACE_OUTER_BOUND ( 'NONE', #14033, .T. ) ; +#31814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31815 = AXIS2_PLACEMENT_3D ( 'NONE', #68616, #37564, #323 ) ; +#31816 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 101.5999999999999900, -1.205558038030003500 ) ) ; +#31817 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73414, #67421, #5410, #48884 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418729700, 0.001049055495481841400 ), + .UNSPECIFIED. ) ; +#31818 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31819 = EDGE_CURVE ( 'NONE', #67043, #16445, #75290, .T. ) ; +#31820 = ORIENTED_EDGE ( 'NONE', *, *, #56198, .F. ) ; +#31821 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063449500, 31.09789380924872400, -28.25343951603344900 ) ) ; +#31822 = FACE_OUTER_BOUND ( 'NONE', #36047, .T. ) ; +#31823 = AXIS2_PLACEMENT_3D ( 'NONE', #68381, #74645, #24868 ) ; +#31824 = AXIS2_PLACEMENT_3D ( 'NONE', #7857, #51343, #14144 ) ; +#31825 = CARTESIAN_POINT ( 'NONE', ( -1.314034490221686700, 45.54999999999998300, -28.37321477197630400 ) ) ; +#31827 = ORIENTED_EDGE ( 'NONE', *, *, #20777, .T. ) ; +#31826 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#31828 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 26.67143691309412600, -28.36981695106780100 ) ) ; +#31829 = ADVANCED_FACE ( 'NONE', ( #2581 ), #5390, .T. ) ; +#31830 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41508, #78805, #54014, #16764 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.349049792646440500E-016, 0.001707792749032205900 ), + .UNSPECIFIED. ) ; +#31831 = CONICAL_SURFACE ( 'NONE', #25972, 10.50000000000009600, 0.7853981633974500600 ) ; +#31832 = CIRCLE ( 'NONE', #64743, 10.50000000000009600 ) ; +#31833 = EDGE_LOOP ( 'NONE', ( #37211, #4081, #49245 ) ) ; +#31834 = CARTESIAN_POINT ( 'NONE', ( 17.24582400329030900, 80.89404291337221800, -28.45010999295951500 ) ) ; +#31835 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100650600, 31.47636006919909900, -28.38670679782167700 ) ) ; +#31836 = CARTESIAN_POINT ( 'NONE', ( 7.729461890678396300E-015, 22.89610994602600200, -28.37519436813178700 ) ) ; +#31837 = VERTEX_POINT ( 'NONE', #61443 ) ; +#31838 = ADVANCED_FACE ( 'NONE', ( #17218 ), #36135, .T. ) ; +#31839 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 62.00000000000002800, -6.205558038030003100 ) ) ; +#31840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52627, #34155, #46631, #9390 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402675331231942800E-007, 0.0002930379123882648800 ), + .UNSPECIFIED. ) ; +#31841 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 30.40050506338822300, -28.70555803802996700 ) ) ; +#31842 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 27.00000000000001100, -9.205558038030005700 ) ) ; +#31843 = CIRCLE ( 'NONE', #54313, 10.00000000000009400 ) ; +#31844 = AXIS2_PLACEMENT_3D ( 'NONE', #58915, #71431, #15410 ) ; +#31845 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312778200, 30.99769010897088600, -28.61774594593774500 ) ) ; +#31846 = ORIENTED_EDGE ( 'NONE', *, *, #15197, .T. ) ; +#31847 = ORIENTED_EDGE ( 'NONE', *, *, #58907, .F. ) ; +#31848 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865873000, 18.41272737910521000, -28.28853693900662600 ) ) ; +#31849 = ORIENTED_EDGE ( 'NONE', *, *, #64804, .T. ) ; +#31850 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 64.33333333333334300, 8.320721403598817300 ) ) ; +#31851 = ORIENTED_EDGE ( 'NONE', *, *, #30018, .T. ) ; +#31852 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571436800, 51.52858243452106300, -28.70555803802997700 ) ) ; +#31853 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#31854 = CONICAL_SURFACE ( 'NONE', #74008, 10.00000000000009200, 0.7853981633974447300 ) ; +#31855 = EDGE_LOOP ( 'NONE', ( #74468, #1476, #4916 ) ) ; +#31856 = ORIENTED_EDGE ( 'NONE', *, *, #55562, .T. ) ; +#31857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32342, #26381, #69859, #32599 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662981900 ), + .UNSPECIFIED. ) ; +#31858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31859 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 50.19949493661175700, -28.70555803802996700 ) ) ; +#31860 = EDGE_CURVE ( 'NONE', #3723, #30313, #60850, .T. ) ; +#31861 = PLANE ( 'NONE', #73865 ) ; +#31862 = CONICAL_SURFACE ( 'NONE', #78407, 10.00000000000009200, 0.7853981633974447300 ) ; +#31863 = ORIENTED_EDGE ( 'NONE', *, *, #14744, .F. ) ; +#31864 = ORIENTED_EDGE ( 'NONE', *, *, #26476, .T. ) ; +#31865 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198453800, 60.90033558196106600, -28.70555803802997700 ) ) ; +#31866 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#31867 = ORIENTED_EDGE ( 'NONE', *, *, #71460, .F. ) ; +#31868 = FACE_OUTER_BOUND ( 'NONE', #56396, .T. ) ; +#31869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31870 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#31872 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224944700, 90.09037803491507600, -28.29483400905899200 ) ) ; +#31873 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655456400, 10.17701665379220800, -28.20555803802993500 ) ) ; +#31874 = FACE_OUTER_BOUND ( 'NONE', #24642, .T. ) ; +#31875 = CARTESIAN_POINT ( 'NONE', ( -3.985743576842169400, 51.58004100757904100, -28.24987021275288900 ) ) ; +#31876 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528127800, 9.968680884981225200, -28.51286550264509100 ) ) ; +#31877 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#31878 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#31879 = ORIENTED_EDGE ( 'NONE', *, *, #53702, .T. ) ; +#31880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31881 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#31882 = PLANE ( 'NONE', #46459 ) ; +#31883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31884 = EDGE_CURVE ( 'NONE', #23348, #69375, #39594, .T. ) ; +#31885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31886 = CONICAL_SURFACE ( 'NONE', #19805, 10.00000000000009400, 0.7853981633974447300 ) ; +#31887 = EDGE_LOOP ( 'NONE', ( #41807, #20394, #17013 ) ) ; +#31888 = EDGE_CURVE ( 'NONE', #74849, #26910, #46323, .T. ) ; +#31889 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 61.35277818615383400, -28.70555803803016200 ) ) ; +#31890 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#31891 = CIRCLE ( 'NONE', #3962, 9.500000000000099500 ) ; +#31892 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000004800, 16.16545993132822200, -28.70555803802997400 ) ) ; +#31893 = EDGE_CURVE ( 'NONE', #59592, #8197, #31912, .T. ) ; +#31894 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428573000, 31.02858243452105200, -28.70555803802996700 ) ) ; +#31895 = ORIENTED_EDGE ( 'NONE', *, *, #4011, .T. ) ; +#31896 = EDGE_CURVE ( 'NONE', #79395, #23839, #17448, .T. ) ; +#31897 = AXIS2_PLACEMENT_3D ( 'NONE', #5903, #49374, #12164 ) ; +#31898 = FACE_OUTER_BOUND ( 'NONE', #36827, .T. ) ; +#31899 = VERTEX_POINT ( 'NONE', #12187 ) ; +#31900 = EDGE_CURVE ( 'NONE', #10281, #520, #50265, .T. ) ; +#31901 = ADVANCED_FACE ( 'NONE', ( #66860 ), #46346, .T. ) ; +#31902 = ADVANCED_FACE ( 'NONE', ( #33758 ), #13324, .T. ) ; +#31903 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 33.00000000000000700, -1.205558038030005300 ) ) ; +#31904 = ORIENTED_EDGE ( 'NONE', *, *, #80039, .F. ) ; +#31905 = AXIS2_PLACEMENT_3D ( 'NONE', #65346, #28076, #71561 ) ; +#31906 = EDGE_CURVE ( 'NONE', #74838, #22393, #2972, .T. ) ; +#31907 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 81.43945992495515900, -28.34042301926901400 ) ) ; +#31908 = EDGE_CURVE ( 'NONE', #51898, #780, #69291, .T. ) ; +#31909 = EDGE_CURVE ( 'NONE', #6075, #75399, #54825, .T. ) ; +#31910 = ADVANCED_FACE ( 'NONE', ( #31822 ), #61018, .F. ) ; +#31911 = FACE_OUTER_BOUND ( 'NONE', #51699, .T. ) ; +#31912 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67673, #36911, #55670, #18435 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.563439202302326200E-016, 0.001246264537622469100 ), + .UNSPECIFIED. ) ; +#31913 = FACE_OUTER_BOUND ( 'NONE', #72308, .T. ) ; +#31914 = EDGE_LOOP ( 'NONE', ( #29162, #34917, #64420, #76430 ) ) ; +#31915 = ORIENTED_EDGE ( 'NONE', *, *, #14640, .F. ) ; +#31916 = AXIS2_PLACEMENT_3D ( 'NONE', #73366, #79616, #29885 ) ; +#31917 = EDGE_LOOP ( 'NONE', ( #61601, #29163, #43603, #48292 ) ) ; +#31918 = ORIENTED_EDGE ( 'NONE', *, *, #25130, .T. ) ; +#31919 = ORIENTED_EDGE ( 'NONE', *, *, #23851, .F. ) ; +#31920 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034451500, 10.17701665379219700, -28.20555803802993500 ) ) ; +#31921 = EDGE_CURVE ( 'NONE', #54615, #77608, #40369, .T. ) ; +#31922 = AXIS2_PLACEMENT_3D ( 'NONE', #77505, #33986, #9205 ) ; +#31923 = AXIS2_PLACEMENT_3D ( 'NONE', #15638, #65155, #21887 ) ; +#31924 = ORIENTED_EDGE ( 'NONE', *, *, #67524, .T. ) ; +#31925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28889, #41070, #41333, #4077 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736129017600E-007, 0.0009376786059871985200 ), + .UNSPECIFIED. ) ; +#31926 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#31927 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 49.23827450271716800, -28.47230003642277300 ) ) ; +#31928 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 4.333333333333346400, 4.294441961970000500 ) ) ; +#31929 = FACE_OUTER_BOUND ( 'NONE', #14583, .T. ) ; +#31931 = EDGE_LOOP ( 'NONE', ( #49870, #78756, #7354 ) ) ; +#31930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31933 = VERTEX_POINT ( 'NONE', #32837 ) ; +#31934 = ORIENTED_EDGE ( 'NONE', *, *, #19255, .F. ) ; +#31935 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049509400, 41.90771342879317300, -28.53891855579982500 ) ) ; +#31936 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50251, #6757, #19276, #62817 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487556065100, 0.001085359101287175400 ), + .UNSPECIFIED. ) ; +#31937 = CARTESIAN_POINT ( 'NONE', ( 18.29059897927476200, 3.417793477897167700, -26.23990455610216100 ) ) ; +#31938 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 12.87738371066728300, -28.70555803802994200 ) ) ; +#31939 = FACE_OUTER_BOUND ( 'NONE', #45229, .T. ) ; +#31940 = AXIS2_PLACEMENT_3D ( 'NONE', #15806, #16087, #3548 ) ; +#31941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46440, #40211, #77492, #52716 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565740932174600E-007, 0.0002592140922089717600 ), + .UNSPECIFIED. ) ; +#31943 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#31944 = ORIENTED_EDGE ( 'NONE', *, *, #29646, .F. ) ; +#31945 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000460100, 18.16749699759770200, -28.20555803803009500 ) ) ; +#31946 = AXIS2_PLACEMENT_3D ( 'NONE', #70611, #33358, #76873 ) ; +#31947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31948 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#31949 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 38.83333333333335000, -6.205558038030004800 ) ) ; +#31950 = FACE_OUTER_BOUND ( 'NONE', #6528, .T. ) ; +#31951 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#31952 = VERTEX_POINT ( 'NONE', #45035 ) ; +#31953 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925619700, 42.28032162676583300, -28.55467576046958200 ) ) ; +#31954 = EDGE_CURVE ( 'NONE', #52219, #45612, #25940, .T. ) ; +#31955 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31956 = AXIS2_PLACEMENT_3D ( 'NONE', #78944, #41635, #4383 ) ; +#31957 = VERTEX_POINT ( 'NONE', #51574 ) ; +#31958 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#31959 = ORIENTED_EDGE ( 'NONE', *, *, #28844, .F. ) ; +#31960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31961 = CARTESIAN_POINT ( 'NONE', ( 23.11427955774910400, 95.65713977887431000, -24.57775787457192600 ) ) ; +#31962 = CARTESIAN_POINT ( 'NONE', ( 3.572261083207513000, 8.799999999999668500, -28.63329695482266100 ) ) ; +#31963 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31964 = AXIS2_PLACEMENT_3D ( 'NONE', #56530, #19280, #62818 ) ; +#31965 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 81.68929190448862700, -28.20555803803030800 ) ) ; +#31966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31967 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274646000, 67.93535825203929300, -28.53896444442226300 ) ) ; +#31968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31969 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725305700, 35.05000000000000400, -28.20555803802995200 ) ) ; +#31970 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019500, 51.43250300240212200, -28.20555803803014400 ) ) ; +#31971 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 80.34267608797617300, -28.20555803803014400 ) ) ; +#31972 = AXIS2_PLACEMENT_3D ( 'NONE', #38170, #44407, #75470 ) ; +#31973 = FACE_OUTER_BOUND ( 'NONE', #65652, .T. ) ; +#31974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31975 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 60.34267608797551900, -28.20555803803047800 ) ) ; +#31976 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31977 = ORIENTED_EDGE ( 'NONE', *, *, #23690, .F. ) ; +#31978 = EDGE_LOOP ( 'NONE', ( #59304, #31114, #73362 ) ) ; +#31979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#31980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31981 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819428200, 61.65075715145307100, -28.20555803803005900 ) ) ; +#31982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51378, #26696, #45390, #8140 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726972806500, 0.0008135742306946889000 ), + .UNSPECIFIED. ) ; +#31983 = FACE_OUTER_BOUND ( 'NONE', #70286, .T. ) ; +#31984 = FACE_OUTER_BOUND ( 'NONE', #35702, .T. ) ; +#31985 = VERTEX_POINT ( 'NONE', #51295 ) ; +#31986 = ORIENTED_EDGE ( 'NONE', *, *, #57498, .F. ) ; +#31987 = EDGE_CURVE ( 'NONE', #71106, #76219, #11471, .T. ) ; +#31988 = ORIENTED_EDGE ( 'NONE', *, *, #71321, .F. ) ; +#31989 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 45.16666666666667100, 9.794441961969994300 ) ) ; +#31990 = FACE_OUTER_BOUND ( 'NONE', #28461, .T. ) ; +#31991 = EDGE_CURVE ( 'NONE', #576, #69612, #77768, .T. ) ; +#31992 = EDGE_LOOP ( 'NONE', ( #67214, #48519, #11453, #7925 ) ) ; +#31993 = VERTEX_POINT ( 'NONE', #58133 ) ; +#31994 = ORIENTED_EDGE ( 'NONE', *, *, #26464, .F. ) ; +#31995 = ORIENTED_EDGE ( 'NONE', *, *, #80037, .F. ) ; +#31996 = ADVANCED_FACE ( 'NONE', ( #79505 ), #11375, .F. ) ; +#31997 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 10.33333333333335300, -5.535685056952199400 ) ) ; +#31998 = ORIENTED_EDGE ( 'NONE', *, *, #78355, .T. ) ; +#31999 = EDGE_CURVE ( 'NONE', #12824, #70070, #27939, .T. ) ; +#32000 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899342700, 38.62363993080084900, -28.38670679782169200 ) ) ; +#32001 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285729500, 12.17681279774500200, -28.70555803802994200 ) ) ; +#32002 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818961900, 79.94924284854708700, -28.20555803802997700 ) ) ; +#32003 = ORIENTED_EDGE ( 'NONE', *, *, #3395, .F. ) ; +#32004 = CONICAL_SURFACE ( 'NONE', #36526, 10.50000000000009400, 0.7853981633974482800 ) ; +#32005 = EDGE_LOOP ( 'NONE', ( #12948, #50029, #11677, #14283 ) ) ; +#32006 = EDGE_CURVE ( 'NONE', #35603, #35816, #63342, .T. ) ; +#32008 = EDGE_CURVE ( 'NONE', #71934, #47960, #48825, .T. ) ; +#32007 = ORIENTED_EDGE ( 'NONE', *, *, #9359, .F. ) ; +#32009 = ORIENTED_EDGE ( 'NONE', *, *, #40209, .F. ) ; +#32010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32011 = EDGE_LOOP ( 'NONE', ( #52937, #28966, #72605, #44122, #11034 ) ) ; +#32012 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 12.66666666666667100, 4.294441961969993400 ) ) ; +#32013 = ORIENTED_EDGE ( 'NONE', *, *, #37231, .T. ) ; +#32014 = CONICAL_SURFACE ( 'NONE', #39586, 10.50000000000009600, 0.7853981633974518300 ) ; +#32015 = AXIS2_PLACEMENT_3D ( 'NONE', #44225, #7001, #50484 ) ; +#32016 = EDGE_CURVE ( 'NONE', #48563, #66489, #29900, .T. ) ; +#32017 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67904, #49361, #68162, #30917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.002339906570790889500 ), + .UNSPECIFIED. ) ; +#32018 = EDGE_CURVE ( 'NONE', #8948, #46326, #34399, .T. ) ; +#32019 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32021 = EDGE_CURVE ( 'NONE', #10610, #68675, #19943, .T. ) ; +#32023 = ORIENTED_EDGE ( 'NONE', *, *, #19001, .T. ) ; +#32022 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 30.74660241562189700, -28.20555803802995200 ) ) ; +#32024 = ADVANCED_FACE ( 'NONE', ( #44385 ), #25970, .T. ) ; +#32025 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.86203212531317800, -28.38801640354855800 ) ) ; +#32026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32028 = AXIS2_PLACEMENT_3D ( 'NONE', #20567, #64106, #26824 ) ; +#32029 = CARTESIAN_POINT ( 'NONE', ( 15.64102140177390700, 92.88204308892912300, -28.62304047239743800 ) ) ; +#32030 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428132400, 71.52858243452097000, -28.70555803803030800 ) ) ; +#32031 = CONICAL_SURFACE ( 'NONE', #45726, 10.00000000000009200, 0.7853981633974447300 ) ; +#32032 = EDGE_LOOP ( 'NONE', ( #57986, #10252, #4974 ) ) ; +#32033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3999, #4268, #23054, #66562 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925627604300E-007, 0.0004084731003436738700 ), + .UNSPECIFIED. ) ; +#32034 = CARTESIAN_POINT ( 'NONE', ( -19.73960995140278400, 0.5207405831234041000, -21.89133604407867400 ) ) ; +#32035 = ORIENTED_EDGE ( 'NONE', *, *, #37691, .F. ) ; +#32036 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32037 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#32038 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900966000, 39.06267502090536700, -28.41043597897460100 ) ) ; +#32039 = ORIENTED_EDGE ( 'NONE', *, *, #46993, .T. ) ; +#32040 = AXIS2_PLACEMENT_3D ( 'NONE', #32260, #75769, #38472 ) ; +#32041 = CARTESIAN_POINT ( 'NONE', ( 4.002028721724268000, 20.31091476818473000, -28.25432823872344600 ) ) ; +#32042 = AXIS2_PLACEMENT_3D ( 'NONE', #47058, #9835, #53338 ) ; +#32043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32044 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 49.63131911501876200, -28.51286550264510200 ) ) ; +#32045 = CONICAL_SURFACE ( 'NONE', #31686, 10.50000000000009600, 0.7853981633974500600 ) ; +#32046 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 16.16666666666668200, 0.9380355014189834000 ) ) ; +#32047 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#32048 = CONICAL_SURFACE ( 'NONE', #73404, 10.00000000000009200, 0.7853981633974447300 ) ; +#32049 = ORIENTED_EDGE ( 'NONE', *, *, #9865, .F. ) ; +#32050 = EDGE_LOOP ( 'NONE', ( #4888, #63995, #68366 ) ) ; +#32051 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079861000, 90.16616330387839200, -28.27375072930982800 ) ) ; +#32052 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 30.94069092601378300, -28.35186440610858600 ) ) ; +#32053 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32054 = AXIS2_PLACEMENT_3D ( 'NONE', #39649, #64440, #8617 ) ; +#32055 = VERTEX_POINT ( 'NONE', #65237 ) ; +#32056 = EDGE_CURVE ( 'NONE', #70708, #30080, #5473, .T. ) ; +#32057 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489639300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#32058 = CONICAL_SURFACE ( 'NONE', #307, 10.00000000000009200, 0.7853981633974447300 ) ; +#32059 = EDGE_LOOP ( 'NONE', ( #23409, #62304, #57288 ) ) ; +#32060 = FACE_OUTER_BOUND ( 'NONE', #76780, .T. ) ; +#32061 = ORIENTED_EDGE ( 'NONE', *, *, #43992, .T. ) ; +#32062 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 81.08083798124324900, -28.45106778992441600 ) ) ; +#32063 = ORIENTED_EDGE ( 'NONE', *, *, #56198, .T. ) ; +#32064 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32065 = ORIENTED_EDGE ( 'NONE', *, *, #37690, .F. ) ; +#32066 = EDGE_CURVE ( 'NONE', #44111, #30021, #42474, .T. ) ; +#32067 = CONICAL_SURFACE ( 'NONE', #31916, 10.50000000000009600, 0.7853981633974518300 ) ; +#32068 = ORIENTED_EDGE ( 'NONE', *, *, #29547, .F. ) ; +#32069 = ORIENTED_EDGE ( 'NONE', *, *, #59058, .T. ) ; +#32070 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040733100, 26.44142842854297000, -28.37229765499279200 ) ) ; +#32071 = AXIS2_PLACEMENT_3D ( 'NONE', #31174, #12406, #62168 ) ; +#32072 = ORIENTED_EDGE ( 'NONE', *, *, #54171, .F. ) ; +#32073 = VERTEX_POINT ( 'NONE', #46666 ) ; +#32074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32075 = ORIENTED_EDGE ( 'NONE', *, *, #890, .F. ) ; +#32076 = ORIENTED_EDGE ( 'NONE', *, *, #65287, .T. ) ; +#32077 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32078 = ORIENTED_EDGE ( 'NONE', *, *, #69862, .F. ) ; +#32079 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 90.80000000000001100, -28.45034744217088700 ) ) ; +#32080 = ORIENTED_EDGE ( 'NONE', *, *, #7072, .T. ) ; +#32081 = CARTESIAN_POINT ( 'NONE', ( 3.535187653983306700, 9.406791769321852600, -28.68794773163824300 ) ) ; +#32082 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38796, #1555, #57591, #20337 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854488600, 0.0007596411030283544300 ), + .UNSPECIFIED. ) ; +#32083 = ADVANCED_FACE ( 'NONE', ( #62960 ), #40533, .T. ) ; +#32084 = CIRCLE ( 'NONE', #20336, 10.50000000000009600 ) ; +#32085 = AXIS2_PLACEMENT_3D ( 'NONE', #5321, #36320, #11589 ) ; +#32086 = ORIENTED_EDGE ( 'NONE', *, *, #14571, .T. ) ; +#32087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32088 = ORIENTED_EDGE ( 'NONE', *, *, #22712, .T. ) ; +#32089 = ORIENTED_EDGE ( 'NONE', *, *, #72314, .T. ) ; +#32090 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#32091 = CYLINDRICAL_SURFACE ( 'NONE', #26491, 10.00000000000000200 ) ; +#32092 = ADVANCED_FACE ( 'NONE', ( #59036 ), #7425, .T. ) ; +#32093 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 59.83333333333333600, 3.794441961969996900 ) ) ; +#32094 = ORIENTED_EDGE ( 'NONE', *, *, #77378, .T. ) ; +#32095 = AXIS2_PLACEMENT_3D ( 'NONE', #20568, #51796, #27103 ) ; +#32096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32097 = ORIENTED_EDGE ( 'NONE', *, *, #495, .T. ) ; +#32098 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 24.83333333333336400, 6.794441961969992500 ) ) ; +#32099 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 41.67701665379185300, -28.20555803802996700 ) ) ; +#32100 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 90.13716795162648100, -28.48697406221665300 ) ) ; +#32101 = EDGE_CURVE ( 'NONE', #14507, #71618, #48320, .T. ) ; +#32102 = FACE_OUTER_BOUND ( 'NONE', #27029, .T. ) ; +#32103 = ORIENTED_EDGE ( 'NONE', *, *, #53967, .T. ) ; +#32104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32105 = ADVANCED_FACE ( 'NONE', ( #57100 ), #38552, .T. ) ; +#32106 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 62.16666666666666400, -12.20555803803000000 ) ) ; +#32107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37127, #74426, #30907, #80668, #43385, #6139, #49620, #12416 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 2.655462347704121700E-016, 0.002282923683053694400, 0.003424385524580408900, 0.004565847366107123400 ), + .UNSPECIFIED. ) ; +#32108 = EDGE_LOOP ( 'NONE', ( #7919, #13953, #39743, #58908 ) ) ; +#32109 = CARTESIAN_POINT ( 'NONE', ( -2.819172343672498500, 9.542716366279732300, -28.36017162544776600 ) ) ; +#32110 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 9.722944711948578300, -28.20555803802994200 ) ) ; +#32111 = ADVANCED_FACE ( 'NONE', ( #24018 ), #22216, .T. ) ; +#32112 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 64.79999999999975600, -28.70555803803030800 ) ) ; +#32113 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001600, 88.16545993132820100, -28.70555803803001600 ) ) ; +#32114 = EDGE_CURVE ( 'NONE', #48735, #68070, #71803, .T. ) ; +#32116 = EDGE_CURVE ( 'NONE', #72397, #71276, #71696, .T. ) ; +#32115 = FACE_OUTER_BOUND ( 'NONE', #52633, .T. ) ; +#32117 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818956600, 69.94924284854708700, -28.20555803802997700 ) ) ; +#32118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32119 = FACE_OUTER_BOUND ( 'NONE', #17847, .T. ) ; +#32120 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458388700, 30.51125751638925400, -28.53740755999539400 ) ) ; +#32121 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56428, #62711, #37920, #661 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.187747314989030100E-016, 0.002676326193402645600 ), + .UNSPECIFIED. ) ; +#32122 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973500, 76.44146991525219900, -28.52629299565632700 ) ) ; +#32123 = EDGE_LOOP ( 'NONE', ( #65514, #49506, #64112, #68776 ) ) ; +#32124 = CARTESIAN_POINT ( 'NONE', ( 3.016217397605803100, 7.259459441370619700, -28.33110170628422600 ) ) ; +#32125 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181919600, 61.65075715145310700, -28.20555803802997700 ) ) ; +#32126 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32127 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 41.96823913367203600, -28.70555803802997700 ) ) ; +#32128 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32129 = AXIS2_PLACEMENT_3D ( 'NONE', #22833, #66368, #29143 ) ; +#32130 = EDGE_CURVE ( 'NONE', #64857, #74940, #57322, .T. ) ; +#32131 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730147400, 60.01262610361144600, -28.29936525552460600 ) ) ; +#32132 = EDGE_CURVE ( 'NONE', #2580, #45576, #42858, .T. ) ; +#32133 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#32134 = CIRCLE ( 'NONE', #4960, 10.00000000000009400 ) ; +#32135 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146249800, 51.25732391202375700, -28.20555803803030800 ) ) ; +#32137 = ORIENTED_EDGE ( 'NONE', *, *, #44445, .F. ) ; +#32136 = EDGE_CURVE ( 'NONE', #7767, #58612, #9385, .T. ) ; +#32138 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32139 = CARTESIAN_POINT ( 'NONE', ( -3.511723594177752300, 9.414546627889175000, -28.68840631370114000 ) ) ; +#32140 = ORIENTED_EDGE ( 'NONE', *, *, #24041, .T. ) ; +#32141 = AXIS2_PLACEMENT_3D ( 'NONE', #28142, #34365, #40597 ) ; +#32142 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 65.66666666666668600, 2.794441961969992100 ) ) ; +#32143 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 45.55000000000000400, -28.20555803802996700 ) ) ; +#32144 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#32145 = VERTEX_POINT ( 'NONE', #10251 ) ; +#32146 = CIRCLE ( 'NONE', #78275, 2.499999999999998700 ) ; +#32147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32148 = VERTEX_POINT ( 'NONE', #41505 ) ; +#32149 = ORIENTED_EDGE ( 'NONE', *, *, #39535, .F. ) ; +#32151 = ORIENTED_EDGE ( 'NONE', *, *, #40943, .T. ) ; +#32150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32153 = ORIENTED_EDGE ( 'NONE', *, *, #22026, .F. ) ; +#32154 = ORIENTED_EDGE ( 'NONE', *, *, #21444, .F. ) ; +#32155 = EDGE_LOOP ( 'NONE', ( #101, #11567, #54906 ) ) ; +#32156 = ORIENTED_EDGE ( 'NONE', *, *, #74927, .F. ) ; +#32157 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189912700, 17.62363993080117600, -28.38670679782149600 ) ) ; +#32158 = AXIS2_PLACEMENT_3D ( 'NONE', #24530, #30794, #61801 ) ; +#32159 = PLANE ( 'NONE', #72106 ) ; +#32160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32161 = AXIS2_PLACEMENT_3D ( 'NONE', #8542, #76829, #39566 ) ; +#32162 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 42.97376207875060300, -28.70555803802997700 ) ) ; +#32163 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62980, #7178, #25996, #69475 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002681079286020975200, 0.0005869108620980508800 ), + .UNSPECIFIED. ) ; +#32164 = EDGE_CURVE ( 'NONE', #68043, #49122, #15262, .T. ) ; +#32165 = ORIENTED_EDGE ( 'NONE', *, *, #32114, .T. ) ; +#32166 = FACE_OUTER_BOUND ( 'NONE', #15697, .T. ) ; +#32167 = ORIENTED_EDGE ( 'NONE', *, *, #74344, .F. ) ; +#32168 = ORIENTED_EDGE ( 'NONE', *, *, #15801, .T. ) ; +#32169 = EDGE_LOOP ( 'NONE', ( #32361, #23788, #47604, #52167 ) ) ; +#32170 = ORIENTED_EDGE ( 'NONE', *, *, #27101, .T. ) ; +#32171 = EDGE_LOOP ( 'NONE', ( #8845, #49024, #10867 ) ) ; +#32172 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.15857157145700800, -28.20555803802994200 ) ) ; +#32173 = FACE_OUTER_BOUND ( 'NONE', #24839, .T. ) ; +#32174 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 30.83333333333334300, -3.349151577478984600 ) ) ; +#32175 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000034200, 40.90050506338820900, -28.70555803802997700 ) ) ; +#32176 = AXIS2_PLACEMENT_3D ( 'NONE', #74517, #37220, #80766 ) ; +#32177 = ORIENTED_EDGE ( 'NONE', *, *, #33136, .F. ) ; +#32178 = EDGE_CURVE ( 'NONE', #80546, #78383, #28457, .T. ) ; +#32179 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 80.07141756547893900, -28.70555803802997700 ) ) ; +#32180 = ADVANCED_FACE ( 'NONE', ( #69723 ), #20110, .F. ) ; +#32181 = CONICAL_SURFACE ( 'NONE', #42540, 10.50000000000009600, 0.7853981633974500600 ) ; +#32183 = ORIENTED_EDGE ( 'NONE', *, *, #72656, .F. ) ; +#32182 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844501200, 76.13383585008145400, -28.37247596307072000 ) ) ; +#32184 = ORIENTED_EDGE ( 'NONE', *, *, #79427, .T. ) ; +#32185 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 65.79999999999998300, -28.20555803802997700 ) ) ; +#32186 = ADVANCED_FACE ( 'NONE', ( #53170 ), #67793, .F. ) ; +#32187 = CARTESIAN_POINT ( 'NONE', ( 3.073496928715955300, 71.37839075872577200, -28.29547734244345800 ) ) ; +#32188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32189 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 2.166666666666683400, -4.152999154772358800 ) ) ; +#32190 = AXIS2_PLACEMENT_3D ( 'NONE', #31313, #37521, #25044 ) ; +#32191 = CIRCLE ( 'NONE', #34919, 10.00000000000009200 ) ; +#32192 = ADVANCED_FACE ( 'NONE', ( #36627 ), #73648, .T. ) ; +#32193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32194 = EDGE_LOOP ( 'NONE', ( #56006, #21310, #30367, #36336, #45557 ) ) ; +#32195 = ORIENTED_EDGE ( 'NONE', *, *, #59453, .T. ) ; +#32196 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36790, #74096, #43043, #5808 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978783435900, 0.0006311001363628561200 ), + .UNSPECIFIED. ) ; +#32197 = CARTESIAN_POINT ( 'NONE', ( 19.44331750287402000, 1.112769953173650100, -23.30048735526636600 ) ) ; +#32198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32200 = ORIENTED_EDGE ( 'NONE', *, *, #64342, .T. ) ; +#32201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32202 = AXIS2_PLACEMENT_3D ( 'NONE', #74577, #23, #12027 ) ; +#32203 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310450800, 18.10230989102908700, -28.61774594594334400 ) ) ; +#32204 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 29.19949493661176000, -28.70555803802994200 ) ) ; +#32205 = ADVANCED_FACE ( 'NONE', ( #22060 ), #1582, .F. ) ; +#32206 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571423300, 15.92318720225443100, -28.70555803803042500 ) ) ; +#32207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32208 = CIRCLE ( 'NONE', #61238, 9.500000000000099500 ) ; +#32209 = ORIENTED_EDGE ( 'NONE', *, *, #52385, .F. ) ; +#32210 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661490100, 10.10677350908850700, -28.30799595738890100 ) ) ; +#32212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4172, #78721, #47383, #47654 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957553608500E-005, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#32211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32213 = VERTEX_POINT ( 'NONE', #42025 ) ; +#32214 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 36.66666666666667900, 3.124568980892192800 ) ) ; +#32215 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466699400, 31.29130857014966700, -28.37223374938522000 ) ) ; +#32216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32217 = FACE_OUTER_BOUND ( 'NONE', #76390, .T. ) ; +#32218 = ORIENTED_EDGE ( 'NONE', *, *, #24855, .T. ) ; +#32219 = ORIENTED_EDGE ( 'NONE', *, *, #60976, .F. ) ; +#32220 = EDGE_LOOP ( 'NONE', ( #77838, #32762, #33074, #13751 ) ) ; +#32221 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109279400, 39.47143078992715500, -28.37063977681167500 ) ) ; +#32222 = CARTESIAN_POINT ( 'NONE', ( -10.75702442553440700, 70.16517473503391500, -28.29551658696701800 ) ) ; +#32223 = ORIENTED_EDGE ( 'NONE', *, *, #63246, .T. ) ; +#32224 = CARTESIAN_POINT ( 'NONE', ( 19.52946468683899200, 96.12946468683436800, -27.74114464608905800 ) ) ; +#32225 = ADVANCED_FACE ( 'NONE', ( #5509 ), #49248, .F. ) ; +#32226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32227 = PLANE ( 'NONE', #50913 ) ; +#32228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32229 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462596100, 60.20590598242380100, -28.39369363572349100 ) ) ; +#32230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32231 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966100, 41.44069092601379400, -28.35186440610858600 ) ) ; +#32232 = ORIENTED_EDGE ( 'NONE', *, *, #18318, .F. ) ; +#32233 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#32234 = CARTESIAN_POINT ( 'NONE', ( 16.34558199310022900, 94.52989488831214300, -28.26727535481343200 ) ) ; +#32235 = CONICAL_SURFACE ( 'NONE', #33797, 10.00000000000009200, 0.7853981633974447300 ) ; +#32236 = ORIENTED_EDGE ( 'NONE', *, *, #15305, .F. ) ; +#32237 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857306200, 36.92318720225497200, -28.70555803802995200 ) ) ; +#32238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32239 = ORIENTED_EDGE ( 'NONE', *, *, #67659, .F. ) ; +#32240 = EDGE_CURVE ( 'NONE', #32412, #17606, #13951, .T. ) ; +#32241 = CARTESIAN_POINT ( 'NONE', ( -17.23693278408310500, 18.78642716943459900, -28.45216716783122400 ) ) ; +#32242 = VERTEX_POINT ( 'NONE', #54553 ) ; +#32243 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#32244 = ORIENTED_EDGE ( 'NONE', *, *, #6877, .T. ) ; +#32245 = CARTESIAN_POINT ( 'NONE', ( 17.31587870724580500, 49.97683288890991800, -28.43418176890224900 ) ) ; +#32246 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544408100, 51.87833896172649200, -28.53892303408252200 ) ) ; +#32247 = FACE_OUTER_BOUND ( 'NONE', #20522, .T. ) ; +#32248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32250 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877852800, 29.07332680091207400, -28.37233769390153900 ) ) ; +#32251 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64459, #20917, #70666, #33410 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577318100 ), + .UNSPECIFIED. ) ; +#32252 = EDGE_CURVE ( 'NONE', #44613, #25126, #80258, .T. ) ; +#32253 = AXIS2_PLACEMENT_3D ( 'NONE', #2915, #46409, #9154 ) ; +#32254 = FACE_OUTER_BOUND ( 'NONE', #57279, .T. ) ; +#32255 = ORIENTED_EDGE ( 'NONE', *, *, #71812, .T. ) ; +#32256 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24299, #36508, #30569, #74075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183069800, 0.005168056621191832200 ), + .UNSPECIFIED. ) ; +#32257 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16453, #29016, #47687, #10471 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721694400, 0.0008252574424209657800 ), + .UNSPECIFIED. ) ; +#32258 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 8.166666666666680300, 3.794441961969996900 ) ) ; +#32259 = AXIS2_PLACEMENT_3D ( 'NONE', #18886, #49859, #56139 ) ; +#32260 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#32261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32262 = EDGE_CURVE ( 'NONE', #19952, #74175, #65824, .T. ) ; +#32263 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189800, 17.73827450271713600, -28.47230003642276600 ) ) ; +#32264 = EDGE_CURVE ( 'NONE', #11805, #61208, #18146, .T. ) ; +#32265 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 32.92856308690590300, -28.36981695106779700 ) ) ; +#32266 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33293, #70560, #45771, #8528 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722421839400E-007, 0.0002592600401783391500 ), + .UNSPECIFIED. ) ; +#32267 = AXIS2_PLACEMENT_3D ( 'NONE', #30963, #37171, #68204 ) ; +#32268 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 71.65075715145216900, -28.20555803803047800 ) ) ; +#32269 = AXIS2_PLACEMENT_3D ( 'NONE', #38816, #50785, #51308 ) ; +#32270 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#32271 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455562200, 79.72166103827331100, -28.53892303408224500 ) ) ; +#32272 = ORIENTED_EDGE ( 'NONE', *, *, #67390, .F. ) ; +#32273 = EDGE_LOOP ( 'NONE', ( #6707, #75283, #7536 ) ) ; +#32274 = AXIS2_PLACEMENT_3D ( 'NONE', #72306, #35045, #78567 ) ; +#32275 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 69.94924284854687400, -28.20555803802997700 ) ) ; +#32276 = ORIENTED_EDGE ( 'NONE', *, *, #40922, .F. ) ; +#32277 = EDGE_CURVE ( 'NONE', #20363, #27421, #65852, .T. ) ; +#32278 = AXIS2_PLACEMENT_3D ( 'NONE', #61140, #23870, #67374 ) ; +#32279 = AXIS2_PLACEMENT_3D ( 'NONE', #43345, #68386, #30872 ) ; +#32280 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#32281 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32282 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32283 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148838400, 36.00238095238051300, -28.70555803802995200 ) ) ; +#32284 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182600, 39.13131911501876200, -28.51286550264509500 ) ) ; +#32285 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958200, 71.46283204837337200, -28.48697406221668500 ) ) ; +#32286 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844499200, 86.13383585008155300, -28.37247596307075900 ) ) ; +#32287 = FACE_OUTER_BOUND ( 'NONE', #41915, .T. ) ; +#32288 = ORIENTED_EDGE ( 'NONE', *, *, #32863, .F. ) ; +#32289 = ORIENTED_EDGE ( 'NONE', *, *, #66704, .T. ) ; +#32290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32291 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 51.43650294695080300, -28.30782889147504400 ) ) ; +#32292 = ADVANCED_FACE ( 'NONE', ( #51176 ), #63904, .F. ) ; +#32293 = ORIENTED_EDGE ( 'NONE', *, *, #49357, .T. ) ; +#32294 = CIRCLE ( 'NONE', #41664, 10.00000000000009200 ) ; +#32295 = ORIENTED_EDGE ( 'NONE', *, *, #42114, .F. ) ; +#32296 = AXIS2_PLACEMENT_3D ( 'NONE', #23729, #67234, #30005 ) ; +#32297 = CARTESIAN_POINT ( 'NONE', ( -18.72092697044493500, 2.558145717695321500, -25.38529680851295100 ) ) ; +#32298 = ORIENTED_EDGE ( 'NONE', *, *, #43469, .T. ) ; +#32299 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#32300 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11485, #42448, #60988, #17734 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775788895800, 0.0009605145132140441600 ), + .UNSPECIFIED. ) ; +#32301 = EDGE_LOOP ( 'NONE', ( #70239, #58613, #20362 ) ) ; +#32302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32303 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 60.69966441803892100, -28.70555803802997700 ) ) ; +#32304 = ADVANCED_FACE ( 'NONE', ( #55125 ), #30812, .F. ) ; +#32305 = CARTESIAN_POINT ( 'NONE', ( -4.561944296567993700, 49.61613305479826900, -28.57723854182876300 ) ) ; +#32306 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32307 = FACE_OUTER_BOUND ( 'NONE', #67706, .T. ) ; +#32308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3860, #41143, #16404, #59929 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957552213300E-005, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#32309 = ADVANCED_FACE ( 'NONE', ( #16202 ), #42839, .T. ) ; +#32310 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013900, 61.76337688193823500, -28.37223523914899600 ) ) ; +#32311 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32312 = AXIS2_PLACEMENT_3D ( 'NONE', #64126, #33084, #20585 ) ; +#32313 = CIRCLE ( 'NONE', #63490, 9.500000000000097700 ) ; +#32314 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 14.00000000000001200, -1.205558038030005300 ) ) ; +#32315 = VERTEX_POINT ( 'NONE', #18099 ) ; +#32316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32317 = CARTESIAN_POINT ( 'NONE', ( -3.160449548281036900, 80.46231468379689000, -28.37082013777833100 ) ) ; +#32318 = CARTESIAN_POINT ( 'NONE', ( 15.85864231129047900, 45.54999999999999700, -28.50266868976637400 ) ) ; +#32319 = ORIENTED_EDGE ( 'NONE', *, *, #52884, .T. ) ; +#32320 = EDGE_LOOP ( 'NONE', ( #31239, #37767, #55114 ) ) ; +#32321 = VERTEX_POINT ( 'NONE', #48802 ) ; +#32322 = CONICAL_SURFACE ( 'NONE', #67946, 10.00000000000009400, 0.7853981633974447300 ) ; +#32323 = VERTEX_POINT ( 'NONE', #24367 ) ; +#32324 = DIRECTION ( 'NONE', ( -1.000000000000000000, 7.269317423140750000E-014, 0.0000000000000000000 ) ) ; +#32325 = FACE_OUTER_BOUND ( 'NONE', #21804, .T. ) ; +#32326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32327 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 80.69949493661175700, -28.70555803802997700 ) ) ; +#32328 = AXIS2_PLACEMENT_3D ( 'NONE', #53578, #16329, #59852 ) ; +#32329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32331 = EDGE_CURVE ( 'NONE', #3423, #2993, #47296, .T. ) ; +#32332 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192912700, 54.79999999999957100, -28.70555803803030800 ) ) ; +#32333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32334 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 30.94069092601378300, -28.35186440610858600 ) ) ; +#32335 = AXIS2_PLACEMENT_3D ( 'NONE', #41942, #4683, #48173 ) ; +#32336 = PLANE ( 'NONE', #52249 ) ; +#32337 = FACE_OUTER_BOUND ( 'NONE', #49359, .T. ) ; +#32338 = ORIENTED_EDGE ( 'NONE', *, *, #22734, .T. ) ; +#32339 = ORIENTED_EDGE ( 'NONE', *, *, #34265, .T. ) ; +#32340 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 20.43250300240229200, -28.20555803802995200 ) ) ; +#32341 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000469800, 90.69949493661177100, -28.70555803803014400 ) ) ; +#32342 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459548200, 69.08026449164336200, -28.70555803802997700 ) ) ; +#32343 = CARTESIAN_POINT ( 'NONE', ( -4.745461813558207200, 39.09617548195245700, -28.64146967277533000 ) ) ; +#32344 = EDGE_CURVE ( 'NONE', #50539, #39293, #51287, .T. ) ; +#32345 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492352400, 78.56055603621138100, -28.70555803803001300 ) ) ; +#32346 = EDGE_CURVE ( 'NONE', #78429, #67438, #36854, .T. ) ; +#32347 = EDGE_LOOP ( 'NONE', ( #46307, #4148, #9916 ) ) ; +#32348 = ORIENTED_EDGE ( 'NONE', *, *, #57083, .F. ) ; +#32349 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 57.66666666666667900, -5.535685056952199400 ) ) ; +#32350 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004000, 60.69949493661175700, -28.70555803802997700 ) ) ; +#32351 = CARTESIAN_POINT ( 'NONE', ( -9.997978530266220100, 39.28907435382947700, -28.25433648786265600 ) ) ; +#32352 = EDGE_CURVE ( 'NONE', #6460, #2143, #22430, .T. ) ; +#32353 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 22.66666666666668200, -8.133761268305512700 ) ) ; +#32354 = EDGE_CURVE ( 'NONE', #59504, #62098, #7938, .T. ) ; +#32355 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3676, #78229, #34718, #47173 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957487769700, 0.004414112765716136700 ), + .UNSPECIFIED. ) ; +#32356 = FACE_OUTER_BOUND ( 'NONE', #77346, .T. ) ; +#32357 = ORIENTED_EDGE ( 'NONE', *, *, #28978, .T. ) ; +#32358 = AXIS2_PLACEMENT_3D ( 'NONE', #71871, #28094, #28389 ) ; +#32359 = CONICAL_SURFACE ( 'NONE', #55036, 10.50000000000009600, 0.7853981633974500600 ) ; +#32360 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#32361 = ORIENTED_EDGE ( 'NONE', *, *, #63832, .F. ) ; +#32362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32364 = VERTEX_POINT ( 'NONE', #12402 ) ; +#32365 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 60.00000000000001400, 9.794441961969996100 ) ) ; +#32366 = ORIENTED_EDGE ( 'NONE', *, *, #7219, .F. ) ; +#32367 = VERTEX_POINT ( 'NONE', #49598 ) ; +#32368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32369 = AXIS2_PLACEMENT_3D ( 'NONE', #5234, #67513, #36243 ) ; +#32370 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #622, #50365, #69171, #31927 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169847800, 0.001370301364302538600 ), + .UNSPECIFIED. ) ; +#32371 = CONICAL_SURFACE ( 'NONE', #43111, 10.50000000000009200, 0.7853981633974482800 ) ; +#32372 = EDGE_CURVE ( 'NONE', #45054, #39968, #74294, .T. ) ; +#32373 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 41.24660241562189400, -28.20555803802996700 ) ) ; +#32374 = EDGE_CURVE ( 'NONE', #36198, #23277, #80437, .T. ) ; +#32375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32376 = EDGE_CURVE ( 'NONE', #30550, #56101, #59840, .T. ) ; +#32377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32379 = ORIENTED_EDGE ( 'NONE', *, *, #31647, .F. ) ; +#32380 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000038200, 61.25489551879273600, -28.37193179497631900 ) ) ; +#32381 = CONICAL_SURFACE ( 'NONE', #38896, 10.00000000000009400, 0.7853981633974447300 ) ; +#32382 = AXIS2_PLACEMENT_3D ( 'NONE', #26207, #57192, #75945 ) ; +#32383 = ORIENTED_EDGE ( 'NONE', *, *, #60734, .F. ) ; +#32384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32385 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995699800, 13.11903418172676800, -28.69431509262337700 ) ) ; +#32386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32387 = VERTEX_POINT ( 'NONE', #388 ) ; +#32388 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807016500, 74.79999999999962800, -28.70555803803014400 ) ) ; +#32389 = ORIENTED_EDGE ( 'NONE', *, *, #39023, .F. ) ; +#32390 = CIRCLE ( 'NONE', #12691, 10.50000000000006400 ) ; +#32391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32393 = ORIENTED_EDGE ( 'NONE', *, *, #22813, .F. ) ; +#32394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32395 = EDGE_CURVE ( 'NONE', #1355, #23151, #34703, .T. ) ; +#32396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32397 = ADVANCED_FACE ( 'NONE', ( #32727 ), #12314, .F. ) ; +#32398 = CIRCLE ( 'NONE', #79979, 7.500000000000000000 ) ; +#32399 = AXIS2_PLACEMENT_3D ( 'NONE', #1769, #45260, #8024 ) ; +#32400 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32401 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32403 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36865, #36612, #61674, #80427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001679852151197386300 ), + .UNSPECIFIED. ) ; +#32402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32405 = EDGE_LOOP ( 'NONE', ( #68408, #679, #33184 ) ) ; +#32406 = VERTEX_POINT ( 'NONE', #25441 ) ; +#32407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32408 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32410 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 63.50000000000000000, -7.061964498581016200 ) ) ; +#32411 = FACE_OUTER_BOUND ( 'NONE', #25769, .T. ) ; +#32412 = VERTEX_POINT ( 'NONE', #68933 ) ; +#32413 = CIRCLE ( 'NONE', #53510, 10.00000000000009200 ) ; +#32414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32415 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.43250300240229200, -28.20555803802997700 ) ) ; +#32416 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 29.03085164125335300, -28.45573375118225100 ) ) ; +#32417 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999953500, 61.43250300240195800, -28.20555803803014400 ) ) ; +#32418 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#32419 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#32420 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708534600, 85.79999999999998300, -28.63843632546336000 ) ) ; +#32421 = ADVANCED_FACE ( 'NONE', ( #3529 ), #59996, .T. ) ; +#32422 = AXIS2_PLACEMENT_3D ( 'NONE', #18467, #12488, #37204 ) ; +#32423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32424 = EDGE_CURVE ( 'NONE', #73286, #56416, #76502, .T. ) ; +#32425 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#32426 = AXIS2_PLACEMENT_3D ( 'NONE', #14057, #57560, #20308 ) ; +#32427 = CARTESIAN_POINT ( 'NONE', ( 17.03244381443358400, 68.39936314726098500, -28.49841021997939800 ) ) ; +#32428 = VERTEX_POINT ( 'NONE', #13208 ) ; +#32429 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 28.66666666666667900, 2.794441961969992100 ) ) ; +#32430 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#32431 = AXIS2_PLACEMENT_3D ( 'NONE', #59670, #22392, #65925 ) ; +#32432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32433 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54652, #11154, #67172, #29954 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810943300, 0.0005317208426589099500 ), + .UNSPECIFIED. ) ; +#32434 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#32435 = FACE_OUTER_BOUND ( 'NONE', #67361, .T. ) ; +#32436 = ORIENTED_EDGE ( 'NONE', *, *, #29316, .T. ) ; +#32437 = FACE_OUTER_BOUND ( 'NONE', #44324, .T. ) ; +#32438 = AXIS2_PLACEMENT_3D ( 'NONE', #53305, #59587, #28344 ) ; +#32439 = ORIENTED_EDGE ( 'NONE', *, *, #41615, .F. ) ; +#32440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32441 = FACE_OUTER_BOUND ( 'NONE', #40040, .T. ) ; +#32442 = VERTEX_POINT ( 'NONE', #56687 ) ; +#32443 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000076400, 73.42856308690555500, -28.36981695106809900 ) ) ; +#32444 = ORIENTED_EDGE ( 'NONE', *, *, #2849, .T. ) ; +#32445 = VERTEX_POINT ( 'NONE', #50393 ) ; +#32446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32447 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#32448 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 2.081668171172168200E-014, -1.205558038030002800 ) ) ; +#32449 = CONICAL_SURFACE ( 'NONE', #15949, 10.00000000000009600, 0.7853981633974447300 ) ; +#32450 = ORIENTED_EDGE ( 'NONE', *, *, #76914, .T. ) ; +#32451 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428228800, 61.52858243452108400, -28.70555803803014400 ) ) ; +#32452 = FACE_OUTER_BOUND ( 'NONE', #66540, .T. ) ; +#32453 = EDGE_CURVE ( 'NONE', #44364, #39632, #14241, .T. ) ; +#32454 = ORIENTED_EDGE ( 'NONE', *, *, #41861, .F. ) ; +#32456 = EDGE_CURVE ( 'NONE', #51458, #78012, #45303, .T. ) ; +#32455 = ORIENTED_EDGE ( 'NONE', *, *, #80143, .F. ) ; +#32457 = ORIENTED_EDGE ( 'NONE', *, *, #37444, .T. ) ; +#32458 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 51.01872124563919200, -28.53757464917570600 ) ) ; +#32459 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 80.79999999999999700, -28.55171188418376700 ) ) ; +#32460 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32461 = ORIENTED_EDGE ( 'NONE', *, *, #77893, .F. ) ; +#32462 = FACE_OUTER_BOUND ( 'NONE', #6669, .T. ) ; +#32463 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#32464 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 70.13716795162658000, -28.48697406221667800 ) ) ; +#32465 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3352, #40623, #15879, #59405 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838145407954900E-007, 0.0004559721418119780900 ), + .UNSPECIFIED. ) ; +#32466 = EDGE_CURVE ( 'NONE', #33477, #13531, #78499, .T. ) ; +#32467 = ADVANCED_FACE ( 'NONE', ( #61950 ), #58020, .T. ) ; +#32468 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32469 = ORIENTED_EDGE ( 'NONE', *, *, #61285, .F. ) ; +#32470 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#32471 = ORIENTED_EDGE ( 'NONE', *, *, #779, .T. ) ; +#32472 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985146500, 36.00238095238093900, -28.70555803802995200 ) ) ; +#32473 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#32474 = EDGE_CURVE ( 'NONE', #54460, #42212, #30904, .T. ) ; +#32475 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 34.50000000000000700, -4.865812075874393000 ) ) ; +#32476 = EDGE_CURVE ( 'NONE', #11257, #45253, #10348, .T. ) ; +#32477 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32478 = ORIENTED_EDGE ( 'NONE', *, *, #28351, .F. ) ; +#32479 = FACE_OUTER_BOUND ( 'NONE', #69968, .T. ) ; +#32480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #443, #37694, #6711, #50198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487870300 ), + .UNSPECIFIED. ) ; +#32482 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091597300, 16.52574874835211800, -28.70555803803001300 ) ) ; +#32483 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826524000, 41.64948861668595700, -28.33414295261581700 ) ) ; +#32484 = ADVANCED_FACE ( 'NONE', ( #26903 ), #8353, .F. ) ; +#32485 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#32486 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290101000, 49.56267502090532400, -28.41043597897456200 ) ) ; +#32487 = AXIS2_PLACEMENT_3D ( 'NONE', #4168, #72463, #47649 ) ; +#32488 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 64.13556610137281700, -28.54207364681943600 ) ) ; +#32489 = EDGE_CURVE ( 'NONE', #57259, #816, #24939, .T. ) ; +#32490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32491 = EDGE_CURVE ( 'NONE', #40694, #30155, #74588, .T. ) ; +#32492 = EDGE_CURVE ( 'NONE', #35283, #57912, #16442, .T. ) ; +#32493 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 44.13556610137283100, -28.54207364681943600 ) ) ; +#32494 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465429700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#32495 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 79.77559325427188200, -28.45987523529578700 ) ) ; +#32496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32497 = AXIS2_PLACEMENT_3D ( 'NONE', #76274, #63802, #32761 ) ; +#32498 = LINE ( 'NONE', #23438, #14011 ) ; +#32499 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32500 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748488200, 60.22161678501166200, -28.29547179040468300 ) ) ; +#32501 = ADVANCED_FACE ( 'NONE', ( #41473 ), #22989, .F. ) ; +#32502 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#32503 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 61.43945992495532900, -28.34042301926881200 ) ) ; +#32504 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 49.65930907398620100, -28.35186440610858900 ) ) ; +#32505 = ORIENTED_EDGE ( 'NONE', *, *, #3740, .F. ) ; +#32506 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 63.65857157145704500, -28.20555803803014400 ) ) ; +#32507 = AXIS2_PLACEMENT_3D ( 'NONE', #66954, #29719, #73214 ) ; +#32508 = CARTESIAN_POINT ( 'NONE', ( 16.93414660039945100, 37.45713945854727500, -28.51850601323110000 ) ) ; +#32509 = AXIS2_PLACEMENT_3D ( 'NONE', #7749, #76039, #44995 ) ; +#32510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32512 = AXIS2_PLACEMENT_3D ( 'NONE', #13066, #7040, #25573 ) ; +#32513 = VERTEX_POINT ( 'NONE', #39251 ) ; +#32514 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576920400, 24.54999999999999700, -28.65220501466659200 ) ) ; +#32515 = ADVANCED_FACE ( 'NONE', ( #28895 ), #70664, .T. ) ; +#32516 = CIRCLE ( 'NONE', #77175, 10.00000000000009200 ) ; +#32517 = EDGE_LOOP ( 'NONE', ( #15079, #13812, #8904 ) ) ; +#32518 = LINE ( 'NONE', #10595, #76288 ) ; +#32519 = VERTEX_POINT ( 'NONE', #51731 ) ; +#32520 = ORIENTED_EDGE ( 'NONE', *, *, #31197, .F. ) ; +#32521 = FACE_OUTER_BOUND ( 'NONE', #56712, .T. ) ; +#32522 = CONICAL_SURFACE ( 'NONE', #201, 10.00000000000009200, 0.7853981633974447300 ) ; +#32523 = VERTEX_POINT ( 'NONE', #58036 ) ; +#32524 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#32525 = ORIENTED_EDGE ( 'NONE', *, *, #78389, .F. ) ; +#32526 = VERTEX_POINT ( 'NONE', #8231 ) ; +#32527 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 6.000000000000004400, -6.205558038030003100 ) ) ; +#32528 = AXIS2_PLACEMENT_3D ( 'NONE', #79500, #4950, #35974 ) ; +#32529 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27064, #64341, #33291, #76808 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397500400, 0.001517194977238247100 ), + .UNSPECIFIED. ) ; +#32530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32531 = FACE_OUTER_BOUND ( 'NONE', #42767, .T. ) ; +#32532 = CARTESIAN_POINT ( 'NONE', ( -3.757024425534406300, 60.16517473503391500, -28.29551658696701500 ) ) ; +#32533 = ORIENTED_EDGE ( 'NONE', *, *, #48220, .F. ) ; +#32534 = FACE_OUTER_BOUND ( 'NONE', #19756, .T. ) ; +#32535 = EDGE_LOOP ( 'NONE', ( #63987, #77012, #52444, #39458, #4736 ) ) ; +#32536 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 32.47376207875059600, -28.70555803802996700 ) ) ; +#32537 = EDGE_CURVE ( 'NONE', #42164, #63160, #1947, .T. ) ; +#32538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32539 = VERTEX_POINT ( 'NONE', #20785 ) ; +#32540 = ORIENTED_EDGE ( 'NONE', *, *, #11527, .F. ) ; +#32541 = ORIENTED_EDGE ( 'NONE', *, *, #9099, .F. ) ; +#32542 = AXIS2_PLACEMENT_3D ( 'NONE', #78907, #4351, #35396 ) ; +#32543 = ORIENTED_EDGE ( 'NONE', *, *, #70474, .F. ) ; +#32544 = ORIENTED_EDGE ( 'NONE', *, *, #75964, .F. ) ; +#32545 = CIRCLE ( 'NONE', #71031, 9.500000000000099500 ) ; +#32546 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#32547 = CARTESIAN_POINT ( 'NONE', ( -5.100117264795665400, 24.55000000000000100, -28.53808257741932800 ) ) ; +#32548 = CARTESIAN_POINT ( 'NONE', ( -16.02235059838246700, 50.54999999999999700, -28.65316072681825300 ) ) ; +#32549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32551 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32552 = EDGE_LOOP ( 'NONE', ( #25379, #17863, #76958, #16588, #52241, #41727, #33232 ) ) ; +#32553 = AXIS2_PLACEMENT_3D ( 'NONE', #48515, #11309, #54798 ) ; +#32554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32555 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144700, 41.52858243452107000, -28.70555803802997700 ) ) ; +#32556 = ORIENTED_EDGE ( 'NONE', *, *, #79204, .T. ) ; +#32557 = CONICAL_SURFACE ( 'NONE', #28395, 10.50000000000009600, 0.7853981633974500600 ) ; +#32558 = CARTESIAN_POINT ( 'NONE', ( -17.21918855214586900, 5.561622294780376800, -27.66663118806640800 ) ) ; +#32559 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#32560 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32561 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 70.13716795162659400, -28.48697406221667400 ) ) ; +#32562 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32563 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52537, #9016, #21584, #65104 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362990900, 0.0007987676590766491900 ), + .UNSPECIFIED. ) ; +#32564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32565 = AXIS2_PLACEMENT_3D ( 'NONE', #10934, #54427, #17185 ) ; +#32566 = ADVANCED_FACE ( 'NONE', ( #72642 ), #37546, .F. ) ; +#32567 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#32568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32569 = EDGE_CURVE ( 'NONE', #52378, #18751, #68280, .T. ) ; +#32570 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 11.83333333333333900, -3.349151577478984600 ) ) ; +#32571 = CIRCLE ( 'NONE', #75193, 10.50000000000009600 ) ; +#32572 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#32573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64124, #26839, #2048, #45546 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211429600, 0.001517199873936576200 ), + .UNSPECIFIED. ) ; +#32574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32575 = EDGE_LOOP ( 'NONE', ( #43915, #48472, #68937, #30594 ) ) ; +#32576 = CONICAL_SURFACE ( 'NONE', #21841, 10.00000000000009200, 0.7853981633974447300 ) ; +#32577 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32578 = ADVANCED_FACE ( 'NONE', ( #6434 ), #4475, .T. ) ; +#32579 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#32580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32581 = ORIENTED_EDGE ( 'NONE', *, *, #76655, .F. ) ; +#32582 = ORIENTED_EDGE ( 'NONE', *, *, #13468, .T. ) ; +#32583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32584 = CIRCLE ( 'NONE', #55237, 10.50000000000009600 ) ; +#32585 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32586 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32587 = CIRCLE ( 'NONE', #52266, 10.00000000000009400 ) ; +#32588 = EDGE_CURVE ( 'NONE', #19608, #68660, #53818, .T. ) ; +#32589 = ORIENTED_EDGE ( 'NONE', *, *, #24887, .F. ) ; +#32590 = EDGE_CURVE ( 'NONE', #77015, #15142, #39340, .T. ) ; +#32591 = ADVANCED_FACE ( 'NONE', ( #39509 ), #52139, .T. ) ; +#32592 = FACE_OUTER_BOUND ( 'NONE', #10419, .T. ) ; +#32593 = ORIENTED_EDGE ( 'NONE', *, *, #74547, .F. ) ; +#32594 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 52.18315603019283300, -28.70555803802999500 ) ) ; +#32595 = ORIENTED_EDGE ( 'NONE', *, *, #27862, .F. ) ; +#32596 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#32597 = AXIS2_PLACEMENT_3D ( 'NONE', #2259, #45763, #8512 ) ; +#32598 = EDGE_CURVE ( 'NONE', #62131, #55080, #43408, .T. ) ; +#32599 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818956600, 69.94924284854708700, -28.20555803802997700 ) ) ; +#32600 = EDGE_CURVE ( 'NONE', #21929, #41168, #24916, .T. ) ; +#32601 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123117400, 18.78860447109572400, -28.53900456328643300 ) ) ; +#32602 = EDGE_CURVE ( 'NONE', #9750, #27463, #56066, .T. ) ; +#32603 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528425300, 28.63131911501858100, -28.51286550264480400 ) ) ; +#32604 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23031, #60308, #4516, #47996 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549582554084100E-007, 0.0002592578639937701300 ), + .UNSPECIFIED. ) ; +#32605 = ADVANCED_FACE ( 'NONE', ( #68715 ), #66777, .T. ) ; +#32606 = CYLINDRICAL_SURFACE ( 'NONE', #66952, 10.00000000000000000 ) ; +#32607 = EDGE_CURVE ( 'NONE', #39909, #42171, #2502, .T. ) ; +#32608 = VERTEX_POINT ( 'NONE', #28143 ) ; +#32609 = AXIS2_PLACEMENT_3D ( 'NONE', #751, #44236, #7017 ) ; +#32610 = FACE_OUTER_BOUND ( 'NONE', #38856, .T. ) ; +#32611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32612 = EDGE_LOOP ( 'NONE', ( #75996, #3758, #21918, #53374, #29377, #35360, #28084, #80314 ) ) ; +#32613 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527471100, 45.86071428647297700, -28.36868303842828700 ) ) ; +#32614 = ORIENTED_EDGE ( 'NONE', *, *, #64797, .T. ) ; +#32615 = ORIENTED_EDGE ( 'NONE', *, *, #64819, .F. ) ; +#32616 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 61.52858243452103400, -28.70555803802997700 ) ) ; +#32617 = VERTEX_POINT ( 'NONE', #59102 ) ; +#32618 = ADVANCED_FACE ( 'NONE', ( #19075 ), #17140, .F. ) ; +#32619 = CONICAL_SURFACE ( 'NONE', #59961, 10.50000000000009600, 0.7853981633974500600 ) ; +#32620 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 55.50000000000000700, 2.454695999814385600 ) ) ; +#32621 = AXIS2_PLACEMENT_3D ( 'NONE', #20882, #64421, #27137 ) ; +#32622 = VERTEX_POINT ( 'NONE', #15857 ) ; +#32623 = AXIS2_PLACEMENT_3D ( 'NONE', #56461, #19209, #62746 ) ; +#32624 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#32625 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542600, 50.49920551340399300, -28.70555803802996700 ) ) ; +#32626 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16243, #72286, #10256, #53753 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.301042606982605300E-018, 0.001246264537621155000 ), + .UNSPECIFIED. ) ; +#32627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32628 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 20.50000000000000400, 4.650848422521016300 ) ) ; +#32629 = VERTEX_POINT ( 'NONE', #59382 ) ; +#32630 = CONICAL_SURFACE ( 'NONE', #36785, 10.50000000000009600, 0.7853981633974482800 ) ; +#32631 = CARTESIAN_POINT ( 'NONE', ( -3.639502927797191800, 41.43250300240230600, -28.25438406275899800 ) ) ; +#32632 = ORIENTED_EDGE ( 'NONE', *, *, #40322, .F. ) ; +#32633 = CARTESIAN_POINT ( 'NONE', ( 16.15828775104295500, 92.17914387552147600, -28.64378972335623900 ) ) ; +#32634 = FACE_OUTER_BOUND ( 'NONE', #30684, .T. ) ; +#32635 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 57.83333333333333600, -12.20555803803000600 ) ) ; +#32636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32638 = AXIS2_PLACEMENT_3D ( 'NONE', #35114, #78627, #41331 ) ; +#32639 = EDGE_CURVE ( 'NONE', #55230, #66847, #54113, .T. ) ; +#32640 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32641 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116570200, 28.70564881207769800, -28.41114655922287800 ) ) ; +#32642 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528154400, 9.968680884981225200, -28.51286550264508400 ) ) ; +#32643 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040577200, 26.44142842854297000, -28.37229765499279200 ) ) ; +#32644 = CARTESIAN_POINT ( 'NONE', ( -10.47654925094192900, 9.410658797990251400, -28.68817753164653100 ) ) ; +#32645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32646 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#32647 = VECTOR ( 'NONE', #66639, 1000.000000000000000 ) ; +#32648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32649 = EDGE_CURVE ( 'NONE', #12637, #41168, #33676, .T. ) ; +#32650 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484952000, 52.31032580520978600, -28.59353418718928800 ) ) ; +#32651 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146265600, 61.25732391202370800, -28.20555803803030800 ) ) ; +#32652 = AXIS2_PLACEMENT_3D ( 'NONE', #46250, #33776, #2734 ) ; +#32653 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52694, #46418, #2926, #15464 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001020022808752763800, 0.0007606607323828935100 ), + .UNSPECIFIED. ) ; +#32654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32656 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.68929190448937300, -28.20555803802997700 ) ) ; +#32658 = ORIENTED_EDGE ( 'NONE', *, *, #57412, .T. ) ; +#32657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32659 = CIRCLE ( 'NONE', #13985, 10.00000000000009200 ) ; +#32660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32662 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922500300, 70.09037803491499100, -28.29483400905889200 ) ) ; +#32663 = EDGE_LOOP ( 'NONE', ( #4738, #18639, #8708, #58599, #620 ) ) ; +#32664 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000044600, 70.16749699759752400, -28.20555803803030800 ) ) ; +#32665 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734525600, 80.27440177985782600, -28.29986836858049800 ) ) ; +#32666 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#32667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32668 = CONICAL_SURFACE ( 'NONE', #78137, 10.50000000000009600, 0.7853981633974500600 ) ; +#32669 = CIRCLE ( 'NONE', #40265, 10.00000000000009200 ) ; +#32670 = ORIENTED_EDGE ( 'NONE', *, *, #75239, .F. ) ; +#32671 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 61.33333333333334300, 5.722645192245503900 ) ) ; +#32672 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#32673 = CIRCLE ( 'NONE', #78692, 10.50000000000009600 ) ; +#32674 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32675 = ORIENTED_EDGE ( 'NONE', *, *, #6445, .F. ) ; +#32676 = ORIENTED_EDGE ( 'NONE', *, *, #32056, .F. ) ; +#32677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32678 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#32679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32680 = AXIS2_PLACEMENT_3D ( 'NONE', #66014, #28789, #72279 ) ; +#32681 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32683 = FACE_OUTER_BOUND ( 'NONE', #25221, .T. ) ; +#32684 = CIRCLE ( 'NONE', #54903, 9.500000000000097700 ) ; +#32685 = ORIENTED_EDGE ( 'NONE', *, *, #52827, .T. ) ; +#32686 = EDGE_CURVE ( 'NONE', #62166, #76860, #10453, .T. ) ; +#32687 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#32688 = ORIENTED_EDGE ( 'NONE', *, *, #35589, .F. ) ; +#32689 = ADVANCED_FACE ( 'NONE', ( #35643 ), #31736, .T. ) ; +#32690 = ORIENTED_EDGE ( 'NONE', *, *, #663, .F. ) ; +#32691 = ORIENTED_EDGE ( 'NONE', *, *, #13710, .T. ) ; +#32692 = VERTEX_POINT ( 'NONE', #47365 ) ; +#32693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32694 = ADVANCED_FACE ( 'NONE', ( #64844 ), #79421, .T. ) ; +#32695 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 26.50000000000001400, -7.061964498581016200 ) ) ; +#32696 = CIRCLE ( 'NONE', #64612, 9.500000000000099500 ) ; +#32697 = EDGE_LOOP ( 'NONE', ( #13921, #43681, #55332 ) ) ; +#32698 = ORIENTED_EDGE ( 'NONE', *, *, #51306, .F. ) ; +#32699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32701 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79631, #67121, #79900, #42606 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.053139612550698100E-016, 0.001246264537621703400 ), + .UNSPECIFIED. ) ; +#32702 = ADVANCED_FACE ( 'NONE', ( #563 ), #22662, .T. ) ; +#32703 = VERTEX_POINT ( 'NONE', #16410 ) ; +#32704 = CONICAL_SURFACE ( 'NONE', #28999, 10.50000000000009600, 0.7853981633974500600 ) ; +#32705 = EDGE_CURVE ( 'NONE', #75104, #67715, #21046, .T. ) ; +#32706 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#32707 = VERTEX_POINT ( 'NONE', #4156 ) ; +#32708 = CONICAL_SURFACE ( 'NONE', #33467, 10.50000000000009600, 0.7853981633974500600 ) ; +#32709 = EDGE_CURVE ( 'NONE', #4061, #70920, #76746, .T. ) ; +#32710 = CARTESIAN_POINT ( 'NONE', ( 16.45968132316362500, 75.17149633148091000, -28.60315268788647100 ) ) ; +#32711 = EDGE_CURVE ( 'NONE', #58539, #70202, #62319, .T. ) ; +#32712 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 46.72261628933269900, -28.70555803802996700 ) ) ; +#32713 = ORIENTED_EDGE ( 'NONE', *, *, #27011, .T. ) ; +#32714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32715 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662742049800, 87.93535825203905200, -28.53896444442206400 ) ) ; +#32716 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, -2.166666666666672300, 1.741883078712340300 ) ) ; +#32717 = EDGE_CURVE ( 'NONE', #2305, #11286, #15177, .T. ) ; +#32718 = AXIS2_PLACEMENT_3D ( 'NONE', #59676, #53402, #16146 ) ; +#32719 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#32720 = FACE_OUTER_BOUND ( 'NONE', #54937, .T. ) ; +#32721 = VERTEX_POINT ( 'NONE', #78971 ) ; +#32722 = CONICAL_SURFACE ( 'NONE', #61375, 10.00000000000009400, 0.7853981633974447300 ) ; +#32723 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 22.20037755566824300, -28.53664883431607500 ) ) ; +#32724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32726 = ORIENTED_EDGE ( 'NONE', *, *, #41309, .F. ) ; +#32727 = FACE_OUTER_BOUND ( 'NONE', #24344, .T. ) ; +#32728 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 70.51916201875610600, -28.45106778992441600 ) ) ; +#32729 = AXIS2_PLACEMENT_3D ( 'NONE', #48000, #10790, #54283 ) ; +#32730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32731 = ORIENTED_EDGE ( 'NONE', *, *, #35935, .F. ) ; +#32732 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655937400, 17.92298334620740600, -28.20555803802993500 ) ) ; +#32733 = EDGE_CURVE ( 'NONE', #28848, #39132, #47807, .T. ) ; +#32734 = EDGE_CURVE ( 'NONE', #9891, #18858, #50184, .T. ) ; +#32735 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32736 = AXIS2_PLACEMENT_3D ( 'NONE', #46025, #77328, #40059 ) ; +#32737 = CIRCLE ( 'NONE', #39511, 10.50000000000009600 ) ; +#32738 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#32739 = FACE_OUTER_BOUND ( 'NONE', #58615, .T. ) ; +#32740 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 32.33333333333333600, 1.294441961969997200 ) ) ; +#32741 = ORIENTED_EDGE ( 'NONE', *, *, #54763, .F. ) ; +#32742 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32743 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32744 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44014, #519, #31836, #75336 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331885294100 ), + .UNSPECIFIED. ) ; +#32745 = VERTEX_POINT ( 'NONE', #16945 ) ; +#32746 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807160200, 84.79999999999998300, -28.70555803802997700 ) ) ; +#32747 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32748 = EDGE_CURVE ( 'NONE', #862, #49715, #45338, .T. ) ; +#32749 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534550700, 18.99920551340383700, -28.70555803803009500 ) ) ; +#32750 = ORIENTED_EDGE ( 'NONE', *, *, #21990, .F. ) ; +#32751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32752 = AXIS2_PLACEMENT_3D ( 'NONE', #51388, #14185, #57692 ) ; +#32753 = AXIS2_PLACEMENT_3D ( 'NONE', #17830, #24087, #67059 ) ; +#32754 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32755 = CARTESIAN_POINT ( 'NONE', ( 3.530520547801897300, 91.59999999999999400, -28.70555803803016200 ) ) ; +#32756 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32757 = CONICAL_SURFACE ( 'NONE', #5355, 10.00000000000009400, 0.7853981633974447300 ) ; +#32758 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762100, 42.02620220503713700, -28.70555803802996700 ) ) ; +#32759 = ORIENTED_EDGE ( 'NONE', *, *, #22357, .T. ) ; +#32760 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449975400, 59.83662311806183000, -28.37223523914888900 ) ) ; +#32761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32762 = ORIENTED_EDGE ( 'NONE', *, *, #70373, .F. ) ; +#32763 = ORIENTED_EDGE ( 'NONE', *, *, #28222, .T. ) ; +#32764 = EDGE_LOOP ( 'NONE', ( #8551, #59774, #39131, #74999 ) ) ; +#32765 = ORIENTED_EDGE ( 'NONE', *, *, #77056, .F. ) ; +#32766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32767 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32768 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310682100, 18.10230989102885200, -28.61774594594303500 ) ) ; +#32769 = CONICAL_SURFACE ( 'NONE', #29246, 10.50000000000009600, 0.7853981633974500600 ) ; +#32770 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#32771 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 41.67701665379225100, -28.20555803802997400 ) ) ; +#32772 = EDGE_LOOP ( 'NONE', ( #69263, #49517, #26750 ) ) ; +#32773 = ORIENTED_EDGE ( 'NONE', *, *, #65173, .F. ) ; +#32774 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#32775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32776 = ORIENTED_EDGE ( 'NONE', *, *, #25101, .F. ) ; +#32777 = FACE_OUTER_BOUND ( 'NONE', #57295, .T. ) ; +#32778 = AXIS2_PLACEMENT_3D ( 'NONE', #60467, #23453, #10957 ) ; +#32779 = EDGE_LOOP ( 'NONE', ( #13184, #22646, #43007 ) ) ; +#32780 = VERTEX_POINT ( 'NONE', #23461 ) ; +#32781 = VECTOR ( 'NONE', #56741, 1000.000000000000000 ) ; +#32782 = CONICAL_SURFACE ( 'NONE', #77239, 10.00000000000009200, 0.7853981633974447300 ) ; +#32783 = ADVANCED_FACE ( 'NONE', ( #48233 ), #44315, .F. ) ; +#32784 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 3.833333333333335300, 3.794441961969996900 ) ) ; +#32785 = AXIS2_PLACEMENT_3D ( 'NONE', #31439, #74950, #37645 ) ; +#32786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32787 = EDGE_LOOP ( 'NONE', ( #8585, #27808, #26732, #41809 ) ) ; +#32788 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#32789 = EDGE_CURVE ( 'NONE', #1355, #21775, #60936, .T. ) ; +#32790 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 30.94069092601378300, -28.35186440610858200 ) ) ; +#32791 = AXIS2_PLACEMENT_3D ( 'NONE', #25919, #6859, #19652 ) ; +#32792 = CONICAL_SURFACE ( 'NONE', #47399, 10.00000000000009200, 0.7853981633974447300 ) ; +#32793 = ORIENTED_EDGE ( 'NONE', *, *, #18633, .F. ) ; +#32794 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#32795 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64767, #21235, #2688, #46198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004043300 ), + .UNSPECIFIED. ) ; +#32796 = CARTESIAN_POINT ( 'NONE', ( 4.230811753656450200, 60.94994472024610100, -28.43636979168684000 ) ) ; +#32797 = ORIENTED_EDGE ( 'NONE', *, *, #55106, .T. ) ; +#32798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32799 = ORIENTED_EDGE ( 'NONE', *, *, #48931, .T. ) ; +#32800 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67905, #49094, #49362, #12153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936662000, 0.0005776948474817079800 ), + .UNSPECIFIED. ) ; +#32801 = ORIENTED_EDGE ( 'NONE', *, *, #25609, .T. ) ; +#32802 = CIRCLE ( 'NONE', #19097, 10.50000000000009800 ) ; +#32803 = VERTEX_POINT ( 'NONE', #61004 ) ; +#32804 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#32805 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#32806 = ADVANCED_FACE ( 'NONE', ( #62885 ), #75498, .F. ) ; +#32807 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32808 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32809 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 35.04999999999999700, -28.20555803802995200 ) ) ; +#32810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32811 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8323, #45564, #58122, #20876 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700597200, 0.0006725414583656810500 ), + .UNSPECIFIED. ) ; +#32812 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#32813 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387502200, 85.13282980700476800, -28.53914313452784800 ) ) ; +#32814 = CIRCLE ( 'NONE', #52613, 10.50000000000009600 ) ; +#32816 = EDGE_CURVE ( 'NONE', #29839, #6774, #33368, .T. ) ; +#32815 = VERTEX_POINT ( 'NONE', #79757 ) ; +#32817 = EDGE_CURVE ( 'NONE', #4580, #79804, #13249, .T. ) ; +#32818 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#32819 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477738300, 20.21410430764718300, -28.27354076558354400 ) ) ; +#32820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32822 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32823 = ORIENTED_EDGE ( 'NONE', *, *, #68929, .T. ) ; +#32824 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#32825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7593, #44838, #57398, #20149 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904854596100E-007, 0.0005865296644889161700 ), + .UNSPECIFIED. ) ; +#32826 = EDGE_CURVE ( 'NONE', #23983, #48058, #18910, .T. ) ; +#32827 = CIRCLE ( 'NONE', #5711, 10.00000000000009400 ) ; +#32828 = EDGE_CURVE ( 'NONE', #54616, #25889, #11288, .T. ) ; +#32829 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429000, 57.92318720225498700, -28.70555803802997700 ) ) ; +#32830 = CYLINDRICAL_SURFACE ( 'NONE', #10004, 10.00000000000000000 ) ; +#32831 = AXIS2_PLACEMENT_3D ( 'NONE', #24422, #49390, #12179 ) ; +#32832 = ORIENTED_EDGE ( 'NONE', *, *, #62160, .T. ) ; +#32833 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000036000, 80.69949493661177100, -28.70555803802997700 ) ) ; +#32834 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 9.666666666666673200, 2.794441961969992100 ) ) ; +#32835 = CARTESIAN_POINT ( 'NONE', ( 15.06104143737604600, 9.938958562623952300, -28.70555803803011200 ) ) ; +#32836 = ORIENTED_EDGE ( 'NONE', *, *, #11826, .F. ) ; +#32837 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566696000, 35.05000000000001100, -28.70555803802995200 ) ) ; +#32838 = EDGE_LOOP ( 'NONE', ( #55724, #73941, #32950, #27645 ) ) ; +#32839 = ORIENTED_EDGE ( 'NONE', *, *, #69846, .F. ) ; +#32840 = ORIENTED_EDGE ( 'NONE', *, *, #76555, .F. ) ; +#32841 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567151900, 9.746602415621900700, -28.20555803802992800 ) ) ; +#32842 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390527000, 61.46283204837340000, -28.48697406221666000 ) ) ; +#32844 = EDGE_LOOP ( 'NONE', ( #41218, #31148, #1863, #79296 ) ) ; +#32843 = PLANE ( 'NONE', #28857 ) ; +#32845 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #28733 ) ) ; +#32846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32847 = EDGE_CURVE ( 'NONE', #51415, #16570, #27849, .T. ) ; +#32848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43052, #74107, #68092, #30851 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999459161700E-007, 0.0006654947828614016600 ), + .UNSPECIFIED. ) ; +#32849 = EDGE_CURVE ( 'NONE', #19770, #53626, #46270, .T. ) ; +#32850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32851 = EDGE_CURVE ( 'NONE', #18756, #17334, #4455, .T. ) ; +#32852 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.65857157145701000, -28.20555803802995200 ) ) ; +#32853 = FACE_OUTER_BOUND ( 'NONE', #7839, .T. ) ; +#32854 = VERTEX_POINT ( 'NONE', #18007 ) ; +#32855 = AXIS2_PLACEMENT_3D ( 'NONE', #66298, #29070, #72557 ) ; +#32856 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670954700, 42.15863441772057000, -28.48677465922828500 ) ) ; +#32857 = EDGE_LOOP ( 'NONE', ( #80311, #51145, #18113, #27554, #3462 ) ) ; +#32858 = ORIENTED_EDGE ( 'NONE', *, *, #47154, .T. ) ; +#32859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32861 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ; +#32862 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#32863 = EDGE_CURVE ( 'NONE', #8560, #25518, #77460, .T. ) ; +#32864 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702742200, 79.37488905616159200, -28.55192314908417100 ) ) ; +#32865 = AXIS2_PLACEMENT_3D ( 'NONE', #31035, #74548, #37247 ) ; +#32866 = AXIS2_PLACEMENT_3D ( 'NONE', #33192, #45389, #76700 ) ; +#32867 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#32868 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#32869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32870 = ORIENTED_EDGE ( 'NONE', *, *, #33065, .T. ) ; +#32871 = ADVANCED_FACE ( 'NONE', ( #58957 ), #40456, .T. ) ; +#32872 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#32873 = CIRCLE ( 'NONE', #46325, 10.50000000000009600 ) ; +#32875 = EDGE_LOOP ( 'NONE', ( #12647, #18431, #16563 ) ) ; +#32874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32876 = ORIENTED_EDGE ( 'NONE', *, *, #32056, .T. ) ; +#32877 = ADVANCED_FACE ( 'NONE', ( #25891 ), #7349, .T. ) ; +#32878 = CONICAL_SURFACE ( 'NONE', #71168, 10.50000000000009600, 0.7853981633974500600 ) ; +#32879 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 53.33333333333335000, -3.705558038030004400 ) ) ; +#32880 = CARTESIAN_POINT ( 'NONE', ( -2.233586726634419600, 94.21601807325038200, -28.37203026796565200 ) ) ; +#32881 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32883 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 18.33333333333333900, -5.205558038030008400 ) ) ; +#32884 = AXIS2_PLACEMENT_3D ( 'NONE', #39504, #2234, #45732 ) ; +#32885 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910400, 76.76150692817282100, -28.68631150211663100 ) ) ; +#32886 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811642600, 41.39435118792236100, -28.41114655922302400 ) ) ; +#32887 = CONICAL_SURFACE ( 'NONE', #75506, 10.00000000000009400, 0.7853981633974447300 ) ; +#32888 = ORIENTED_EDGE ( 'NONE', *, *, #20960, .F. ) ; +#32889 = ADVANCED_FACE ( 'NONE', ( #73568 ), #55048, .T. ) ; +#32890 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 55.66666666666667900, 8.320721403598824400 ) ) ; +#32891 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#32892 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 91.59999999999999400, -28.70555803803001300 ) ) ; +#32893 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914530900, 81.82440674572717400, -28.45987523529583300 ) ) ; +#32894 = ORIENTED_EDGE ( 'NONE', *, *, #68703, .F. ) ; +#32895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32896 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#32897 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32898 = ADVANCED_FACE ( 'NONE', ( #29819 ), #12562, .T. ) ; +#32899 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198582500, 70.90033558196111600, -28.70555803802997700 ) ) ; +#32900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32901 = CIRCLE ( 'NONE', #35826, 10.00000000000009400 ) ; +#32902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31678, #68920, #37903, #638 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539929400, 0.0009765394310395504200 ), + .UNSPECIFIED. ) ; +#32903 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32904 = CIRCLE ( 'NONE', #37029, 10.00000000000009200 ) ; +#32905 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 70.10230989102910800, -28.61774594594330900 ) ) ; +#32906 = ORIENTED_EDGE ( 'NONE', *, *, #68231, .F. ) ; +#32907 = EDGE_LOOP ( 'NONE', ( #16435, #67653, #1763, #58516 ) ) ; +#32908 = AXIS2_PLACEMENT_3D ( 'NONE', #56709, #19459, #62986 ) ; +#32909 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#32910 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#32911 = ORIENTED_EDGE ( 'NONE', *, *, #41422, .T. ) ; +#32912 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#32913 = ORIENTED_EDGE ( 'NONE', *, *, #50088, .F. ) ; +#32914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32915 = ORIENTED_EDGE ( 'NONE', *, *, #71093, .F. ) ; +#32916 = ORIENTED_EDGE ( 'NONE', *, *, #25202, .F. ) ; +#32917 = EDGE_LOOP ( 'NONE', ( #16251, #11081, #1589 ) ) ; +#32918 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650650600, 41.51912043132465200, -28.30223257055583000 ) ) ; +#32919 = ORIENTED_EDGE ( 'NONE', *, *, #33564, .F. ) ; +#32920 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#32921 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32922 = CARTESIAN_POINT ( 'NONE', ( -1.899882735204322200, 35.05000000000000400, -28.53808257741934200 ) ) ; +#32923 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32924 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#32925 = EDGE_LOOP ( 'NONE', ( #39047, #11995, #70886 ) ) ; +#32926 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 43.43454006867177200, -28.70555803802999500 ) ) ; +#32927 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4786, #42045, #17314, #60852 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866946693200E-007, 0.001076778502991073700 ), + .UNSPECIFIED. ) ; +#32928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32929 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#32930 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32931 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985147600, 25.50238095238092100, -28.70555803802994200 ) ) ; +#32932 = FACE_OUTER_BOUND ( 'NONE', #47072, .T. ) ; +#32933 = VERTEX_POINT ( 'NONE', #6292 ) ; +#32934 = EDGE_CURVE ( 'NONE', #58896, #67641, #70763, .T. ) ; +#32935 = ORIENTED_EDGE ( 'NONE', *, *, #31987, .F. ) ; +#32936 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 59.16666666666664300, -9.205558038030003900 ) ) ; +#32937 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 67.92318720225497900, -28.70555803802997700 ) ) ; +#32938 = ORIENTED_EDGE ( 'NONE', *, *, #51496, .F. ) ; +#32940 = EDGE_CURVE ( 'NONE', #24987, #5869, #9299, .T. ) ; +#32939 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22999, #35520, #54248, #17008 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.052107275601604900E-016, 0.001679852151211001300 ), + .UNSPECIFIED. ) ; +#32941 = ORIENTED_EDGE ( 'NONE', *, *, #47373, .T. ) ; +#32942 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32943 = CONICAL_SURFACE ( 'NONE', #3118, 10.50000000000009400, 0.7853981633974500600 ) ; +#32944 = PLANE ( 'NONE', #41558 ) ; +#32945 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153451500, 90.79999999999967000, -28.55171188418384900 ) ) ; +#32946 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526946600, 70.01262610361142400, -28.29936525552474100 ) ) ; +#32947 = EDGE_CURVE ( 'NONE', #12766, #72597, #57021, .T. ) ; +#32948 = CARTESIAN_POINT ( 'NONE', ( -11.33104051008493900, 50.81480465755353000, -28.53901988778293100 ) ) ; +#32949 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55859, #80628, #37081, #18614 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362904200, 0.0007987676590766307600 ), + .UNSPECIFIED. ) ; +#32950 = ORIENTED_EDGE ( 'NONE', *, *, #40116, .T. ) ; +#32951 = EDGE_CURVE ( 'NONE', #7646, #51144, #42391, .T. ) ; +#32952 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.66749699759768400, -28.20555803802994200 ) ) ; +#32953 = EDGE_CURVE ( 'NONE', #66911, #576, #71615, .T. ) ; +#32954 = CIRCLE ( 'NONE', #65097, 10.50000000000009600 ) ; +#32955 = ORIENTED_EDGE ( 'NONE', *, *, #62065, .F. ) ; +#32956 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#32957 = ORIENTED_EDGE ( 'NONE', *, *, #37082, .T. ) ; +#32958 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919700, 14.05000000000000400, -28.65220501466659200 ) ) ; +#32959 = ORIENTED_EDGE ( 'NONE', *, *, #26072, .T. ) ; +#32960 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 24.33333333333334600, 5.722645192245503900 ) ) ; +#32961 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102000, 30.05558404029872200, -28.45034744217088400 ) ) ; +#32962 = AXIS2_PLACEMENT_3D ( 'NONE', #1813, #70368, #64162 ) ; +#32963 = EDGE_CURVE ( 'NONE', #43518, #7754, #23939, .T. ) ; +#32964 = EDGE_CURVE ( 'NONE', #26934, #4680, #5428, .T. ) ; +#32965 = EDGE_CURVE ( 'NONE', #78943, #12775, #56290, .T. ) ; +#32966 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 74.83849307182666200, -28.68631150211663400 ) ) ; +#32967 = ADVANCED_FACE ( 'NONE', ( #36546 ), #69370, .T. ) ; +#32968 = AXIS2_PLACEMENT_3D ( 'NONE', #49271, #12059, #55554 ) ; +#32969 = FACE_OUTER_BOUND ( 'NONE', #53779, .T. ) ; +#32970 = FACE_OUTER_BOUND ( 'NONE', #78316, .T. ) ; +#32971 = VERTEX_POINT ( 'NONE', #553 ) ; +#32972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32973 = EDGE_LOOP ( 'NONE', ( #45364, #22398, #26394, #65303, #4761 ) ) ; +#32974 = ADVANCED_FACE ( 'NONE', ( #3452 ), #34630, .F. ) ; +#32975 = AXIS2_PLACEMENT_3D ( 'NONE', #51805, #70331, #14323 ) ; +#32976 = AXIS2_PLACEMENT_3D ( 'NONE', #22870, #66394, #29179 ) ; +#32977 = CARTESIAN_POINT ( 'NONE', ( -9.769188246343311700, 60.94994472024610100, -28.43636979168675400 ) ) ; +#32978 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32979 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21229, #39976, #71252, #33988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349827522100E-007, 0.0004318366892335630800 ), + .UNSPECIFIED. ) ; +#32980 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32981 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 80.13716795162658000, -28.48697406221668500 ) ) ; +#32982 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 67.83333333333337100, -3.349151577478984600 ) ) ; +#32983 = CIRCLE ( 'NONE', #57154, 10.00000000000009400 ) ; +#32984 = VERTEX_POINT ( 'NONE', #13647 ) ; +#32985 = FACE_OUTER_BOUND ( 'NONE', #3499, .T. ) ; +#32986 = ORIENTED_EDGE ( 'NONE', *, *, #65049, .T. ) ; +#32987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32988 = EDGE_LOOP ( 'NONE', ( #16002, #63207, #13514 ) ) ; +#32989 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 70.16749699759769500, -28.20555803802997700 ) ) ; +#32990 = EDGE_LOOP ( 'NONE', ( #56459, #3645, #48104 ) ) ; +#32991 = ADVANCED_FACE ( 'NONE', ( #69641 ), #53091, .T. ) ; +#32992 = FACE_OUTER_BOUND ( 'NONE', #74299, .T. ) ; +#32993 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 65.79999999999999700, -28.70525300642875200 ) ) ; +#32994 = ORIENTED_EDGE ( 'NONE', *, *, #44691, .F. ) ; +#32995 = VERTEX_POINT ( 'NONE', #32385 ) ; +#32996 = ORIENTED_EDGE ( 'NONE', *, *, #69570, .T. ) ; +#32997 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703200, 25.48096581827319100, -28.69431509262337300 ) ) ; +#32998 = ORIENTED_EDGE ( 'NONE', *, *, #40347, .F. ) ; +#32999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33000 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 65.80000000000001100, -28.70555803802997700 ) ) ; +#33001 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33002 = AXIS2_PLACEMENT_3D ( 'NONE', #58953, #21725, #65258 ) ; +#33003 = ORIENTED_EDGE ( 'NONE', *, *, #28529, .F. ) ; +#33004 = ADVANCED_FACE ( 'NONE', ( #20035 ), #49175, .T. ) ; +#33005 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 60.24722181384566300, -28.70555803802999500 ) ) ; +#33006 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000018200, 81.07757630314186800, -28.53861367218610200 ) ) ; +#33007 = ORIENTED_EDGE ( 'NONE', *, *, #6257, .F. ) ; +#33008 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000053300, 8.673617379884035500E-016, -19.32050998661230100 ) ) ; +#33009 = CIRCLE ( 'NONE', #13083, 9.500000000000097700 ) ; +#33010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33011 = ORIENTED_EDGE ( 'NONE', *, *, #19899, .T. ) ; +#33012 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 30.16666666666668200, -2.545304000185620600 ) ) ; +#33013 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .T. ) ; +#33014 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33015 = ORIENTED_EDGE ( 'NONE', *, *, #42891, .F. ) ; +#33016 = EDGE_CURVE ( 'NONE', #71408, #76860, #1504, .T. ) ; +#33017 = EDGE_LOOP ( 'NONE', ( #74915, #3831, #439, #53219 ) ) ; +#33018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33019 = ORIENTED_EDGE ( 'NONE', *, *, #14380, .F. ) ; +#33020 = AXIS2_PLACEMENT_3D ( 'NONE', #25746, #69244, #31980 ) ; +#33021 = EDGE_LOOP ( 'NONE', ( #3107, #29156, #3135, #78854 ) ) ; +#33022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33023 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 75.79999999999998300, -28.20555803802997700 ) ) ; +#33024 = CONICAL_SURFACE ( 'NONE', #55195, 10.00000000000009200, 0.7853981633974415100 ) ; +#33025 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136825300, 51.67041185698241200, -28.27321389036146800 ) ) ; +#33026 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 60.34267608797618000, -28.20555803803014400 ) ) ; +#33027 = ADVANCED_FACE ( 'NONE', ( #65779 ), #80345, .F. ) ; +#33028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33029 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33030 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32664, #13918, #38887, #1642 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925579089500E-007, 0.0004084731003434383800 ), + .UNSPECIFIED. ) ; +#33031 = ORIENTED_EDGE ( 'NONE', *, *, #68103, .F. ) ; +#33032 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042474100, 27.50972971738995900, -28.70555803802993500 ) ) ; +#33033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33034 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939125500, 14.68533208989808100, -28.53910738522682800 ) ) ; +#33035 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534572000, 40.60079448659599400, -28.70555803802996700 ) ) ; +#33036 = AXIS2_PLACEMENT_3D ( 'NONE', #69638, #26165, #44852 ) ; +#33037 = CARTESIAN_POINT ( 'NONE', ( -17.03178561562176100, 61.31767869357339900, -28.25052235028430700 ) ) ; +#33038 = CIRCLE ( 'NONE', #51439, 10.00000000000009200 ) ; +#33039 = ORIENTED_EDGE ( 'NONE', *, *, #11452, .T. ) ; +#33040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30624, #36832, #44350, #7120 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184993900, 0.001517199873936111700 ), + .UNSPECIFIED. ) ; +#33041 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003000, 71.35277818615384100, -28.70555803803016200 ) ) ; +#33042 = ORIENTED_EDGE ( 'NONE', *, *, #33065, .F. ) ; +#33043 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#33044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33045 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174749000, 51.43945992495533700, -28.34042301926881200 ) ) ; +#33046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33048 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#33049 = EDGE_CURVE ( 'NONE', #20847, #52661, #32659, .T. ) ; +#33050 = CONICAL_SURFACE ( 'NONE', #76464, 10.50000000000009600, 0.7853981633974500600 ) ; +#33051 = CIRCLE ( 'NONE', #45712, 10.50000000000009800 ) ; +#33052 = EDGE_LOOP ( 'NONE', ( #79961, #36807, #21756, #1219 ) ) ; +#33053 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105664800, 24.55000000000001100, -28.70555803802994200 ) ) ; +#33054 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 1.666666666666677200, -5.535685056952199400 ) ) ; +#33055 = ORIENTED_EDGE ( 'NONE', *, *, #35849, .T. ) ; +#33056 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950485500, 41.90771342879313700, -28.53891855579977500 ) ) ; +#33057 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23680, #79424, #29961, #73442 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388206713500E-007, 0.0007987676590766554800 ), + .UNSPECIFIED. ) ; +#33058 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#33059 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999300, 89.81066373133471400, -28.53923937255202100 ) ) ; +#33060 = CIRCLE ( 'NONE', #1839, 10.00000000000009400 ) ; +#33061 = ORIENTED_EDGE ( 'NONE', *, *, #68459, .T. ) ; +#33062 = FACE_OUTER_BOUND ( 'NONE', #5632, .T. ) ; +#33063 = ORIENTED_EDGE ( 'NONE', *, *, #71955, .F. ) ; +#33064 = EDGE_CURVE ( 'NONE', #41038, #7682, #18064, .T. ) ; +#33065 = EDGE_CURVE ( 'NONE', #77712, #29021, #41843, .T. ) ; +#33066 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33067 = FACE_OUTER_BOUND ( 'NONE', #48352, .T. ) ; +#33068 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474190500, 28.23827450271715000, -28.47230003642276600 ) ) ; +#33069 = VERTEX_POINT ( 'NONE', #45108 ) ; +#33070 = VERTEX_POINT ( 'NONE', #1630 ) ; +#33071 = ORIENTED_EDGE ( 'NONE', *, *, #42349, .F. ) ; +#33072 = ORIENTED_EDGE ( 'NONE', *, *, #33277, .T. ) ; +#33073 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000700, 41.06914835874665900, -28.45573375118225800 ) ) ; +#33074 = ORIENTED_EDGE ( 'NONE', *, *, #21779, .T. ) ; +#33075 = ORIENTED_EDGE ( 'NONE', *, *, #35246, .T. ) ; +#33076 = ADVANCED_FACE ( 'NONE', ( #51103 ), #14177, .F. ) ; +#33077 = ORIENTED_EDGE ( 'NONE', *, *, #76545, .T. ) ; +#33078 = EDGE_CURVE ( 'NONE', #80344, #49207, #30723, .T. ) ; +#33079 = EDGE_CURVE ( 'NONE', #56323, #12400, #67708, .T. ) ; +#33080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33081 = EDGE_CURVE ( 'NONE', #30313, #15532, #27419, .T. ) ; +#33082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33083 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33637, #76886, #14870, #77146 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.018150550692646900E-016, 0.001246264537621669600 ), + .UNSPECIFIED. ) ; +#33084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33085 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390318300, 90.13716795162640900, -28.48697406221641500 ) ) ; +#33086 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33087 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301200, 66.79999999999964200, -28.70555803802997700 ) ) ; +#33088 = CONICAL_SURFACE ( 'NONE', #69294, 10.00000000000009200, 0.7853981633974447300 ) ; +#33089 = AXIS2_PLACEMENT_3D ( 'NONE', #77317, #40052, #2768 ) ; +#33090 = ORIENTED_EDGE ( 'NONE', *, *, #66726, .T. ) ; +#33091 = VERTEX_POINT ( 'NONE', #45647 ) ; +#33092 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 5.000000000000000000, -18.70555803803001300 ) ) ; +#33093 = VERTEX_POINT ( 'NONE', #70707 ) ; +#33094 = ADVANCED_FACE ( 'NONE', ( #63821 ), #28814, .T. ) ; +#33095 = ORIENTED_EDGE ( 'NONE', *, *, #66824, .T. ) ; +#33096 = ORIENTED_EDGE ( 'NONE', *, *, #50673, .T. ) ; +#33097 = VERTEX_POINT ( 'NONE', #8677 ) ; +#33098 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33100 = CARTESIAN_POINT ( 'NONE', ( -2.487410011451154400, 80.12140959736001400, -28.55996453402206800 ) ) ; +#33101 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#33102 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33103 = ADVANCED_FACE ( 'NONE', ( #45255 ), #76432, .F. ) ; +#33104 = FACE_OUTER_BOUND ( 'NONE', #37488, .T. ) ; +#33105 = AXIS2_PLACEMENT_3D ( 'NONE', #11479, #54966, #17728 ) ; +#33106 = AXIS2_PLACEMENT_3D ( 'NONE', #28274, #71767, #34500 ) ; +#33107 = ORIENTED_EDGE ( 'NONE', *, *, #18216, .T. ) ; +#33108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#33109 = AXIS2_PLACEMENT_3D ( 'NONE', #3809, #47301, #10086 ) ; +#33110 = VERTEX_POINT ( 'NONE', #21236 ) ; +#33111 = ADVANCED_FACE ( 'NONE', ( #16119 ), #27496, .T. ) ; +#33112 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 19.90050506338822300, -28.70555803802995200 ) ) ; +#33113 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 51.99560977511615800, -28.70555803803030800 ) ) ; +#33114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33116 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 7.500000000000006200, -7.061964498581016200 ) ) ; +#33117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33118 = CONICAL_SURFACE ( 'NONE', #22794, 10.50000000000009600, 0.7853981633974500600 ) ; +#33119 = ORIENTED_EDGE ( 'NONE', *, *, #17254, .F. ) ; +#33120 = CARTESIAN_POINT ( 'NONE', ( 15.02341999935003800, 9.953160001299924200, -28.70555803803000900 ) ) ; +#33121 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53009, #46744, #40235, #15775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735586086400E-007, 0.0009376786059871754300 ), + .UNSPECIFIED. ) ; +#33122 = EDGE_LOOP ( 'NONE', ( #43335, #78936, #31851, #34595 ) ) ; +#33123 = ORIENTED_EDGE ( 'NONE', *, *, #27810, .F. ) ; +#33124 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#33125 = AXIS2_PLACEMENT_3D ( 'NONE', #70281, #33033, #76536 ) ; +#33126 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428597800, 31.02858243452103400, -28.70555803802996700 ) ) ; +#33127 = EDGE_CURVE ( 'NONE', #27421, #56798, #12941, .T. ) ; +#33128 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.68929190448938000, -28.20555803802997700 ) ) ; +#33129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33131 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 61.82440674572816200, -28.45987523529581900 ) ) ; +#33132 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754300, 29.20543520232828500, -28.70555803802994200 ) ) ; +#33133 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33135 = CONICAL_SURFACE ( 'NONE', #45816, 10.00000000000009200, 0.7853981633974447300 ) ; +#33136 = EDGE_CURVE ( 'NONE', #55345, #10347, #79261, .T. ) ; +#33137 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .F. ) ; +#33138 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192912700, 54.79999999999957100, -28.70555803803030800 ) ) ; +#33139 = EDGE_LOOP ( 'NONE', ( #37921, #9480, #72134, #343 ) ) ; +#33140 = AXIS2_PLACEMENT_3D ( 'NONE', #32956, #76470, #39190 ) ; +#33141 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33142 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33144 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#33145 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 81.43650294695132200, -28.30782889147482400 ) ) ; +#33146 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999800, 80.90050506338822300, -28.70555803802997700 ) ) ; +#33147 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#33148 = FACE_OUTER_BOUND ( 'NONE', #34677, .T. ) ; +#33149 = ORIENTED_EDGE ( 'NONE', *, *, #57032, .F. ) ; +#33150 = AXIS2_PLACEMENT_3D ( 'NONE', #79226, #54447, #72968 ) ; +#33151 = EDGE_LOOP ( 'NONE', ( #63613, #37559, #32457, #68293 ) ) ; +#33152 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#33153 = ORIENTED_EDGE ( 'NONE', *, *, #52234, .T. ) ; +#33154 = FACE_OUTER_BOUND ( 'NONE', #23606, .T. ) ; +#33155 = ORIENTED_EDGE ( 'NONE', *, *, #43185, .T. ) ; +#33156 = ORIENTED_EDGE ( 'NONE', *, *, #36086, .T. ) ; +#33158 = EDGE_LOOP ( 'NONE', ( #21627, #44693, #64869 ) ) ; +#33157 = CARTESIAN_POINT ( 'NONE', ( -4.512589988549028600, 80.12140959736000000, -28.55996453402213900 ) ) ; +#33159 = VERTEX_POINT ( 'NONE', #21511 ) ; +#33160 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 51.16666666666668600, 0.1341879241256129200 ) ) ; +#33161 = AXIS2_PLACEMENT_3D ( 'NONE', #24781, #68294, #31046 ) ; +#33162 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33163 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37466, #74774, #6491, #49968 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047521137000E-007, 0.0003301033223275549400 ), + .UNSPECIFIED. ) ; +#33164 = CARTESIAN_POINT ( 'NONE', ( 11.51272810170965300, 71.47860083896961200, -28.56001287362867600 ) ) ; +#33165 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 16.16666666666668200, 0.9380355014189834000 ) ) ; +#33166 = VERTEX_POINT ( 'NONE', #77512 ) ; +#33167 = FACE_OUTER_BOUND ( 'NONE', #5538, .T. ) ; +#33168 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455700400, 71.52472935029882700, -28.39317435246158500 ) ) ; +#33169 = EDGE_CURVE ( 'NONE', #39817, #5551, #78418, .T. ) ; +#33170 = ORIENTED_EDGE ( 'NONE', *, *, #34992, .T. ) ; +#33171 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#33172 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020700, 75.79999999999950000, -28.70555803803047500 ) ) ; +#33173 = VERTEX_POINT ( 'NONE', #58742 ) ; +#33174 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 53.50000000000000700, -9.258116921287651700 ) ) ; +#33175 = CARTESIAN_POINT ( 'NONE', ( 6.100334448160443100, 80.79999999999984100, -28.20555803803004100 ) ) ; +#33176 = VERTEX_POINT ( 'NONE', #59012 ) ; +#33177 = ORIENTED_EDGE ( 'NONE', *, *, #35614, .T. ) ; +#33178 = CARTESIAN_POINT ( 'NONE', ( 16.56643609059974800, 46.72507724664475900, -28.58387515229125200 ) ) ; +#33179 = CONICAL_SURFACE ( 'NONE', #42531, 10.00000000000009400, 0.7853981633974447300 ) ; +#33180 = ORIENTED_EDGE ( 'NONE', *, *, #64915, .T. ) ; +#33181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33182 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489605100, 39.15930907398613000, -28.35186440610853600 ) ) ; +#33183 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.16749699759768800, -28.20555803802997700 ) ) ; +#33184 = ORIENTED_EDGE ( 'NONE', *, *, #51235, .F. ) ; +#33185 = EDGE_CURVE ( 'NONE', #23991, #69853, #38469, .T. ) ; +#33186 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 15.46443389862718700, -28.54207364681937500 ) ) ; +#33187 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33188 = FACE_OUTER_BOUND ( 'NONE', #62988, .T. ) ; +#33189 = ORIENTED_EDGE ( 'NONE', *, *, #34204, .F. ) ; +#33190 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#33191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33192 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#33193 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33194 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215565900, 55.79999999999925800, -28.20555803803047800 ) ) ; +#33195 = ADVANCED_FACE ( 'NONE', ( #47219 ), #74507, .F. ) ; +#33196 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#33197 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489641100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#33198 = AXIS2_PLACEMENT_3D ( 'NONE', #59749, #78523, #41226 ) ; +#33199 = EDGE_CURVE ( 'NONE', #359, #70940, #10274, .T. ) ; +#33200 = EDGE_CURVE ( 'NONE', #60130, #68754, #64823, .T. ) ; +#33201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33202 = ADVANCED_FACE ( 'NONE', ( #43332 ), #78055, .T. ) ; +#33203 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492421100, 18.70543520232829600, -28.70555803802992800 ) ) ; +#33204 = EDGE_CURVE ( 'NONE', #64447, #52754, #26818, .T. ) ; +#33205 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534293800, 80.94992009694543400, -28.43638873268731600 ) ) ; +#33206 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700000, 34.11903418172681800, -28.69431509262337700 ) ) ; +#33207 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 57.00000000000000700, 6.794441961969995200 ) ) ; +#33208 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#33209 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#33210 = ORIENTED_EDGE ( 'NONE', *, *, #64445, .F. ) ; +#33211 = EDGE_LOOP ( 'NONE', ( #63001, #74384, #64940 ) ) ; +#33212 = CARTESIAN_POINT ( 'NONE', ( 3.556183125752454500E-014, 53.65857157145704500, -28.20555803802997700 ) ) ; +#33213 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45316, #1812, #70367, #76622 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185241100, 0.001517199873936352000 ), + .UNSPECIFIED. ) ; +#33214 = ORIENTED_EDGE ( 'NONE', *, *, #43181, .F. ) ; +#33215 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 73.65857157145681800, -28.20555803803047800 ) ) ; +#33216 = AXIS2_PLACEMENT_3D ( 'NONE', #60106, #22827, #66355 ) ; +#33217 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, 26.44142842854296700, -28.20555803802994200 ) ) ; +#33218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33220 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 80.34267608797551900, -28.20555803803014400 ) ) ; +#33221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33222 = ADVANCED_FACE ( 'NONE', ( #12224 ), #72571, .F. ) ; +#33223 = EDGE_CURVE ( 'NONE', #75931, #66578, #50282, .T. ) ; +#33224 = AXIS2_PLACEMENT_3D ( 'NONE', #22255, #53524, #41014 ) ; +#33225 = CYLINDRICAL_SURFACE ( 'NONE', #8518, 10.00000000000000000 ) ; +#33226 = VERTEX_POINT ( 'NONE', #22290 ) ; +#33227 = VERTEX_POINT ( 'NONE', #59844 ) ; +#33228 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#33229 = CIRCLE ( 'NONE', #9375, 10.00000000000009200 ) ; +#33230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33231 = VERTEX_POINT ( 'NONE', #22564 ) ; +#33232 = ORIENTED_EDGE ( 'NONE', *, *, #42853, .F. ) ; +#33233 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999999700, -28.20555803802997700 ) ) ; +#33234 = VERTEX_POINT ( 'NONE', #16316 ) ; +#33236 = ORIENTED_EDGE ( 'NONE', *, *, #22580, .T. ) ; +#33235 = EDGE_CURVE ( 'NONE', #54382, #57390, #8276, .T. ) ; +#33237 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 22.16666666666667100, -9.205558038030003900 ) ) ; +#33238 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33239 = ORIENTED_EDGE ( 'NONE', *, *, #35926, .F. ) ; +#33240 = ORIENTED_EDGE ( 'NONE', *, *, #58577, .F. ) ; +#33241 = AXIS2_PLACEMENT_3D ( 'NONE', #31184, #74692, #37386 ) ; +#33242 = FACE_OUTER_BOUND ( 'NONE', #13996, .T. ) ; +#33243 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533253500, 17.80869142985023100, -28.37223374938528800 ) ) ; +#33244 = FACE_OUTER_BOUND ( 'NONE', #78706, .T. ) ; +#33245 = ORIENTED_EDGE ( 'NONE', *, *, #29703, .F. ) ; +#33246 = ORIENTED_EDGE ( 'NONE', *, *, #2436, .T. ) ; +#33247 = VERTEX_POINT ( 'NONE', #3775 ) ; +#33248 = ORIENTED_EDGE ( 'NONE', *, *, #11535, .F. ) ; +#33249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33250 = ORIENTED_EDGE ( 'NONE', *, *, #24737, .F. ) ; +#33251 = FACE_OUTER_BOUND ( 'NONE', #16488, .T. ) ; +#33252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33253 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 47.20389005397399300, -28.37519436813179400 ) ) ; +#33254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73640, #30151, #5363, #48850 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669794755215100E-007, 0.0005050252131275720000 ), + .UNSPECIFIED. ) ; +#33255 = CARTESIAN_POINT ( 'NONE', ( -23.53553390593273100, 100.1355339059327300, -23.91561187082989900 ) ) ; +#33256 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 65.66666666666668600, 2.794441961969992100 ) ) ; +#33257 = ORIENTED_EDGE ( 'NONE', *, *, #56541, .T. ) ; +#33258 = AXIS2_PLACEMENT_3D ( 'NONE', #76350, #26610, #39064 ) ; +#33259 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#33260 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33261 = CONICAL_SURFACE ( 'NONE', #21139, 10.50000000000009600, 0.7853981633974500600 ) ; +#33262 = ORIENTED_EDGE ( 'NONE', *, *, #3395, .T. ) ; +#33263 = EDGE_LOOP ( 'NONE', ( #19659, #65407, #61907, #57761, #8865 ) ) ; +#33264 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27448, #52687, #71474, #34217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820737743600E-007, 0.0005869288236378179000 ), + .UNSPECIFIED. ) ; +#33265 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#33266 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33267 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33268 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345602200, 81.52472935029902600, -28.39317435246123700 ) ) ; +#33269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54208, #4700, #10985, #54483 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962240830300, 0.0005195704752304184000 ), + .UNSPECIFIED. ) ; +#33270 = CARTESIAN_POINT ( 'NONE', ( 10.49999999998611400, 50.90050506339282100, -28.70555803803030800 ) ) ; +#33271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33272 = AXIS2_PLACEMENT_3D ( 'NONE', #35872, #29400, #41847 ) ; +#33273 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#33274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33275 = ADVANCED_FACE ( 'NONE', ( #57950 ), #22910, .F. ) ; +#33276 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#33277 = EDGE_CURVE ( 'NONE', #37167, #10347, #39441, .T. ) ; +#33278 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68526, #74781, #25283, #68787 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794021326400E-007, 0.0009376791149930084600 ), + .UNSPECIFIED. ) ; +#33279 = CARTESIAN_POINT ( 'NONE', ( -23.83038445412218600, 5.584807772938817500, -23.43868275677213800 ) ) ; +#33280 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844501700, 75.46616414991841300, -28.37247596307076200 ) ) ; +#33281 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 28.00000000000001400, -1.205558038030002800 ) ) ; +#33282 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 50.79999999999999000, -28.45034744217088700 ) ) ; +#33283 = CARTESIAN_POINT ( 'NONE', ( 3.778746597915070700, 18.16476742015636200, -28.30311934730020700 ) ) ; +#33284 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#33285 = EDGE_LOOP ( 'NONE', ( #32582, #36196, #24352, #26564 ) ) ; +#33286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33287 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 88.39962244433174000, -28.53664883431610000 ) ) ; +#33288 = ORIENTED_EDGE ( 'NONE', *, *, #50203, .T. ) ; +#33289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33290 = ADVANCED_FACE ( 'NONE', ( #41389 ), #6354, .T. ) ; +#33291 = CARTESIAN_POINT ( 'NONE', ( -11.74534273518456500, 31.00380841767820800, -28.64142799534456100 ) ) ; +#33292 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#33293 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 60.34267608797601700, -28.20555803802997700 ) ) ; +#33294 = CONICAL_SURFACE ( 'NONE', #56429, 10.50000000000009600, 0.7853981633974518300 ) ; +#33295 = ORIENTED_EDGE ( 'NONE', *, *, #73255, .F. ) ; +#33296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33297 = CONICAL_SURFACE ( 'NONE', #6079, 10.50000000000009600, 0.7853981633974500600 ) ; +#33298 = ORIENTED_EDGE ( 'NONE', *, *, #56693, .F. ) ; +#33299 = EDGE_CURVE ( 'NONE', #45474, #3798, #59918, .T. ) ; +#33300 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 22.89610994602603400, -28.37519436813181200 ) ) ; +#33301 = ADVANCED_FACE ( 'NONE', ( #55982 ), #4402, .T. ) ; +#33302 = ORIENTED_EDGE ( 'NONE', *, *, #75133, .F. ) ; +#33303 = CIRCLE ( 'NONE', #61492, 10.00000000000009200 ) ; +#33304 = EDGE_CURVE ( 'NONE', #32692, #66793, #35869, .T. ) ; +#33305 = ORIENTED_EDGE ( 'NONE', *, *, #33795, .F. ) ; +#33307 = ORIENTED_EDGE ( 'NONE', *, *, #7693, .F. ) ; +#33306 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33308 = VERTEX_POINT ( 'NONE', #66890 ) ; +#33309 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944325800, 38.80044153223016000, -28.38339015421939100 ) ) ; +#33310 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474190500, 28.23827450271715000, -28.47230003642276600 ) ) ; +#33311 = ORIENTED_EDGE ( 'NONE', *, *, #70257, .T. ) ; +#33312 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 51.46283204837325800, -28.48697406221693400 ) ) ; +#33313 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33314 = CIRCLE ( 'NONE', #27543, 10.00000000000009400 ) ; +#33315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33316 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21155, #14883, #39342, #64680 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736292690900E-007, 0.0006649316450231957800 ), + .UNSPECIFIED. ) ; +#33317 = EDGE_CURVE ( 'NONE', #50435, #51373, #24860, .T. ) ; +#33318 = ADVANCED_FACE ( 'NONE', ( #37464 ), #35573, .T. ) ; +#33319 = EDGE_CURVE ( 'NONE', #45119, #19874, #52055, .T. ) ; +#33320 = ORIENTED_EDGE ( 'NONE', *, *, #37330, .T. ) ; +#33321 = AXIS2_PLACEMENT_3D ( 'NONE', #39558, #2273, #45783 ) ; +#33322 = FACE_OUTER_BOUND ( 'NONE', #50384, .T. ) ; +#33323 = EDGE_LOOP ( 'NONE', ( #71700, #76085, #60187 ) ) ; +#33324 = ORIENTED_EDGE ( 'NONE', *, *, #28459, .T. ) ; +#33325 = ORIENTED_EDGE ( 'NONE', *, *, #73354, .T. ) ; +#33326 = ORIENTED_EDGE ( 'NONE', *, *, #50790, .F. ) ; +#33327 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33328 = CONICAL_SURFACE ( 'NONE', #27829, 10.00000000000009200, 0.7853981633974447300 ) ; +#33329 = ORIENTED_EDGE ( 'NONE', *, *, #24057, .F. ) ; +#33330 = FACE_OUTER_BOUND ( 'NONE', #10932, .T. ) ; +#33331 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, -0.4999999999999870700, 2.454695999814385600 ) ) ; +#33332 = EDGE_CURVE ( 'NONE', #46273, #57238, #70581, .T. ) ; +#33333 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 80.70627955247209700, -28.45034744217088700 ) ) ; +#33334 = EDGE_CURVE ( 'NONE', #26454, #53523, #54034, .T. ) ; +#33335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33336 = EDGE_CURVE ( 'NONE', #31243, #23362, #21425, .T. ) ; +#33337 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.20389005397395000, -28.37519436813182600 ) ) ; +#33338 = VERTEX_POINT ( 'NONE', #36150 ) ; +#33339 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500185800, 79.83662311806141100, -28.37223523914928300 ) ) ; +#33340 = AXIS2_PLACEMENT_3D ( 'NONE', #63530, #69750, #20009 ) ; +#33341 = FACE_OUTER_BOUND ( 'NONE', #16273, .T. ) ; +#33342 = VERTEX_POINT ( 'NONE', #79939 ) ; +#33343 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#33344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33345 = AXIS2_PLACEMENT_3D ( 'NONE', #22151, #16436, #10179 ) ; +#33346 = PLANE ( 'NONE', #61643 ) ; +#33347 = EDGE_CURVE ( 'NONE', #49283, #66821, #20978, .T. ) ; +#33348 = AXIS2_PLACEMENT_3D ( 'NONE', #53722, #60003, #71984 ) ; +#33349 = AXIS2_PLACEMENT_3D ( 'NONE', #11207, #54700, #17450 ) ; +#33350 = CARTESIAN_POINT ( 'NONE', ( -0.6537355349281783700, 9.798328894942921300, -28.70352427628718700 ) ) ; +#33351 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 43.67681279774500800, -28.70555803802997700 ) ) ; +#33352 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783828400, 71.43250300240181600, -28.23966044827385600 ) ) ; +#33353 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33355 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 43.00000000000001400, -12.20555803803000200 ) ) ; +#33356 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33357 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33359 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#33360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33361 = ORIENTED_EDGE ( 'NONE', *, *, #70589, .F. ) ; +#33362 = CARTESIAN_POINT ( 'NONE', ( -11.04810142719004400, 93.52999794783627900, -28.52121714037359400 ) ) ; +#33363 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#33364 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33366 = EDGE_LOOP ( 'NONE', ( #65655, #54153, #12667, #7462, #29288 ) ) ; +#33365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33367 = ADVANCED_FACE ( 'NONE', ( #68645 ), #17069, .T. ) ; +#33368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42464, #36235, #54986, #17749 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247643361200, 0.0009605145132141657000 ), + .UNSPECIFIED. ) ; +#33369 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026328900, 45.54999999999999700, -28.70555803802996700 ) ) ; +#33370 = FACE_OUTER_BOUND ( 'NONE', #57589, .T. ) ; +#33371 = AXIS2_PLACEMENT_3D ( 'NONE', #18974, #68757, #6203 ) ; +#33372 = ORIENTED_EDGE ( 'NONE', *, *, #74566, .T. ) ; +#33373 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654556100, 51.32559822014179900, -28.29986836858018500 ) ) ; +#33374 = CIRCLE ( 'NONE', #19055, 9.500000000000099500 ) ; +#33375 = CARTESIAN_POINT ( 'NONE', ( 17.26457816484936100, 17.81692616327261200, -28.44650835714260100 ) ) ; +#33376 = VERTEX_POINT ( 'NONE', #30447 ) ; +#33377 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 5.333333333333342800, 5.722645192245503900 ) ) ; +#33378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33379 = FACE_OUTER_BOUND ( 'NONE', #69049, .T. ) ; +#33380 = VERTEX_POINT ( 'NONE', #73951 ) ; +#33381 = ORIENTED_EDGE ( 'NONE', *, *, #36067, .T. ) ; +#33382 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567148300, 49.85339758437810100, -28.20555803802996700 ) ) ; +#33383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33384 = ADVANCED_FACE ( 'NONE', ( #18991 ), #64776, .F. ) ; +#33385 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.34510448120794400, -28.37193179497692000 ) ) ; +#33386 = ORIENTED_EDGE ( 'NONE', *, *, #12519, .F. ) ; +#33387 = AXIS2_PLACEMENT_3D ( 'NONE', #78526, #41228, #3961 ) ; +#33388 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33389 = CARTESIAN_POINT ( 'NONE', ( -10.07349692871594200, 81.37839075872578600, -28.29547734244345500 ) ) ; +#33390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56489, #13005, #19230, #62780 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207940065300E-007, 0.0008724366121409710300 ), + .UNSPECIFIED. ) ; +#33391 = FACE_OUTER_BOUND ( 'NONE', #29694, .T. ) ; +#33392 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034406200, 28.42298334620740300, -28.20555803802994500 ) ) ; +#33393 = EDGE_CURVE ( 'NONE', #57282, #57725, #486, .T. ) ; +#33394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33395 = ORIENTED_EDGE ( 'NONE', *, *, #25018, .F. ) ; +#33396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33397 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148358100, 44.59761904761935400, -28.70555803802996700 ) ) ; +#33398 = CIRCLE ( 'NONE', #2931, 9.500000000000099500 ) ; +#33399 = AXIS2_PLACEMENT_3D ( 'NONE', #66922, #29689, #73188 ) ; +#33400 = CARTESIAN_POINT ( 'NONE', ( -4.745342735184516800, 20.50380841767820800, -28.64142799534453200 ) ) ; +#33401 = ORIENTED_EDGE ( 'NONE', *, *, #38166, .T. ) ; +#33402 = ADVANCED_FACE ( 'NONE', ( #50097 ), #15095, .T. ) ; +#33403 = ORIENTED_EDGE ( 'NONE', *, *, #68814, .T. ) ; +#33404 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000104400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33405 = ORIENTED_EDGE ( 'NONE', *, *, #44937, .F. ) ; +#33406 = VERTEX_POINT ( 'NONE', #80465 ) ; +#33407 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#33408 = CONICAL_SURFACE ( 'NONE', #18955, 10.00000000000009400, 0.7853981633974447300 ) ; +#33409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33410 = CARTESIAN_POINT ( 'NONE', ( 3.556183125752454500E-014, 53.65857157145704500, -28.20555803802997700 ) ) ; +#33411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74233, #30450, #18181, #36930 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.122502256758252800E-017, 0.001492013864175004300 ), + .UNSPECIFIED. ) ; +#33412 = PLANE ( 'NONE', #37871 ) ; +#33413 = ADVANCED_FACE ( 'NONE', ( #48158 ), #62807, .F. ) ; +#33414 = EDGE_LOOP ( 'NONE', ( #41028, #19141, #21790, #55471 ) ) ; +#33415 = EDGE_CURVE ( 'NONE', #70154, #35236, #6934, .T. ) ; +#33416 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609181600, 44.91466791010185500, -28.53910738522649000 ) ) ; +#33417 = ORIENTED_EDGE ( 'NONE', *, *, #24609, .T. ) ; +#33418 = CIRCLE ( 'NONE', #68012, 10.00000000000009400 ) ; +#33419 = EDGE_CURVE ( 'NONE', #49679, #53856, #73279, .T. ) ; +#33420 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489603300, 49.65930907398613000, -28.35186440610855000 ) ) ; +#33421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33422 = ADVANCED_FACE ( 'NONE', ( #79350 ), #29733, .F. ) ; +#33423 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 49.00000000000002100, -1.205558038030002800 ) ) ; +#33424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33425 = EDGE_CURVE ( 'NONE', #30084, #7540, #58790, .T. ) ; +#33426 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701969200, 55.79999999999999700, -28.70555803803014400 ) ) ; +#33427 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 14.00000000000001200, -1.205558038030005300 ) ) ; +#33428 = EDGE_CURVE ( 'NONE', #64320, #17139, #2433, .T. ) ; +#33429 = AXIS2_PLACEMENT_3D ( 'NONE', #28011, #21733, #71493 ) ; +#33430 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909800, 84.83849307182683200, -28.68631150211663100 ) ) ; +#33431 = CIRCLE ( 'NONE', #47676, 10.00000000000009200 ) ; +#33432 = EDGE_CURVE ( 'NONE', #65427, #45054, #44284, .T. ) ; +#33433 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 51.33333333333333600, 4.294441961970000500 ) ) ; +#33434 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655644300, 41.67701665379239300, -28.20555803802997400 ) ) ; +#33435 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33436 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189000, 49.23827450271716800, -28.47230003642277300 ) ) ; +#33437 = ORIENTED_EDGE ( 'NONE', *, *, #50053, .F. ) ; +#33438 = AXIS2_PLACEMENT_3D ( 'NONE', #19649, #63181, #25918 ) ; +#33440 = ORIENTED_EDGE ( 'NONE', *, *, #41141, .T. ) ; +#33439 = EDGE_CURVE ( 'NONE', #2167, #23233, #61870, .T. ) ; +#33441 = EDGE_CURVE ( 'NONE', #26405, #40749, #46209, .T. ) ; +#33442 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2765, #40050, #52541, #15311 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.321154511682636300E-016, 0.001179148174663062500 ), + .UNSPECIFIED. ) ; +#33443 = CARTESIAN_POINT ( 'NONE', ( 4.423544863740858100E-014, 62.97376207875063200, -28.70555803802997700 ) ) ; +#33444 = EDGE_CURVE ( 'NONE', #34970, #30013, #33595, .T. ) ; +#33445 = ORIENTED_EDGE ( 'NONE', *, *, #24137, .T. ) ; +#33446 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949257800, 10.52620220503774500, -28.70555803803042500 ) ) ; +#33447 = CARTESIAN_POINT ( 'NONE', ( -17.37141821671362500, 70.16749699759769500, -28.25056166218020700 ) ) ; +#33448 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#33449 = FACE_OUTER_BOUND ( 'NONE', #12545, .T. ) ; +#33450 = ORIENTED_EDGE ( 'NONE', *, *, #13857, .T. ) ; +#33451 = CONICAL_SURFACE ( 'NONE', #66972, 10.50000000000009600, 0.7853981633974500600 ) ; +#33452 = ORIENTED_EDGE ( 'NONE', *, *, #71209, .T. ) ; +#33453 = AXIS2_PLACEMENT_3D ( 'NONE', #26902, #70393, #33143 ) ; +#33454 = EDGE_LOOP ( 'NONE', ( #67016, #13479, #65635, #6182, #20447 ) ) ; +#33455 = CIRCLE ( 'NONE', #53759, 10.00000000000009200 ) ; +#33456 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239000, 81.43945992495534400, -28.34042301926881200 ) ) ; +#33457 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#33458 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33459 = EDGE_LOOP ( 'NONE', ( #18327, #56617, #36891, #78343 ) ) ; +#33460 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769032400, 30.31139552890385100, -28.53900456328627700 ) ) ; +#33461 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33462 = ORIENTED_EDGE ( 'NONE', *, *, #64904, .T. ) ; +#33463 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174632600, 60.16054007504464400, -28.34042301926885100 ) ) ; +#33464 = EDGE_CURVE ( 'NONE', #38741, #35301, #31653, .T. ) ; +#33465 = ORIENTED_EDGE ( 'NONE', *, *, #3740, .T. ) ; +#33466 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 90.34510448120794000, -28.37193179497697300 ) ) ; +#33467 = AXIS2_PLACEMENT_3D ( 'NONE', #17740, #30009, #5214 ) ; +#33468 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 78.39962244433174000, -28.53664883431610400 ) ) ; +#33469 = AXIS2_PLACEMENT_3D ( 'NONE', #13502, #57012, #19746 ) ; +#33470 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33471 = CIRCLE ( 'NONE', #69088, 9.500000000000129700 ) ; +#33472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33473 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811662500, 9.894351187922373100, -28.41114655922294900 ) ) ; +#33474 = ORIENTED_EDGE ( 'NONE', *, *, #39660, .T. ) ; +#33475 = CONICAL_SURFACE ( 'NONE', #67535, 10.00000000000009200, 0.7853981633974447300 ) ; +#33476 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 54.83333333333332100, -9.205558038030003900 ) ) ; +#33477 = VERTEX_POINT ( 'NONE', #62786 ) ; +#33478 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33480 = EDGE_LOOP ( 'NONE', ( #55757, #785, #53048, #44273 ) ) ; +#33481 = ORIENTED_EDGE ( 'NONE', *, *, #78005, .T. ) ; +#33482 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#33483 = EDGE_LOOP ( 'NONE', ( #29785, #24577, #48167, #26565, #13855 ) ) ; +#33484 = FACE_OUTER_BOUND ( 'NONE', #33414, .T. ) ; +#33485 = CARTESIAN_POINT ( 'NONE', ( 5.305166115223488400, 8.955677477148148200, -28.65273083505966800 ) ) ; +#33486 = ADVANCED_FACE ( 'NONE', ( #66697 ), #75276, .T. ) ; +#33487 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#33488 = AXIS2_PLACEMENT_3D ( 'NONE', #311, #43806, #6573 ) ; +#33489 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33490 = ORIENTED_EDGE ( 'NONE', *, *, #69314, .F. ) ; +#33491 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5660, #42913, #11936, #55427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397398619100E-007, 0.0003301092607755755400 ), + .UNSPECIFIED. ) ; +#33492 = ORIENTED_EDGE ( 'NONE', *, *, #74942, .F. ) ; +#33493 = ORIENTED_EDGE ( 'NONE', *, *, #15098, .T. ) ; +#33494 = AXIS2_PLACEMENT_3D ( 'NONE', #67415, #17657, #73680 ) ; +#33495 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33496 = ORIENTED_EDGE ( 'NONE', *, *, #78203, .T. ) ; +#33497 = ADVANCED_FACE ( 'NONE', ( #44240 ), #58876, .T. ) ; +#33498 = EDGE_CURVE ( 'NONE', #72597, #18103, #29928, .T. ) ; +#33499 = CIRCLE ( 'NONE', #16908, 10.00000000000009200 ) ; +#33500 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 79.94924284854739900, -28.20555803802997700 ) ) ; +#33501 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13674, #50873, #26183, #69665 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241065000, 0.0005195704752302032900 ), + .UNSPECIFIED. ) ; +#33502 = AXIS2_PLACEMENT_3D ( 'NONE', #70229, #32972, #76486 ) ; +#33503 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#33504 = ADVANCED_FACE ( 'NONE', ( #11214 ), #13547, .T. ) ; +#33505 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 20.00000000000001100, 6.794441961969995200 ) ) ; +#33506 = AXIS2_PLACEMENT_3D ( 'NONE', #22866, #4090, #35409 ) ; +#33507 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609161200, 90.13716795162640900, -28.48697406221693000 ) ) ; +#33508 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 60.34267608797603800, -28.20555803802997700 ) ) ; +#33509 = ADVANCED_FACE ( 'NONE', ( #13175 ), #9223, .T. ) ; +#33510 = AXIS2_PLACEMENT_3D ( 'NONE', #78542, #66291, #47458 ) ; +#33511 = FACE_OUTER_BOUND ( 'NONE', #23964, .T. ) ; +#33512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33513 = ORIENTED_EDGE ( 'NONE', *, *, #62067, .F. ) ; +#33514 = VERTEX_POINT ( 'NONE', #38497 ) ; +#33515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33516 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390051800, 80.13716795162663700, -28.48697406221650000 ) ) ; +#33517 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063266500, 28.50210619075101400, -28.25343951603328200 ) ) ; +#33518 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 63.50000000000000000, -7.061964498581016200 ) ) ; +#33519 = ORIENTED_EDGE ( 'NONE', *, *, #56806, .F. ) ; +#33520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33521 = CIRCLE ( 'NONE', #7489, 9.500000000000099500 ) ; +#33522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33524 = EDGE_CURVE ( 'NONE', #32707, #65169, #25814, .T. ) ; +#33523 = ORIENTED_EDGE ( 'NONE', *, *, #67031, .F. ) ; +#33525 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 68.16545993132821500, -28.70555803802999500 ) ) ; +#33526 = EDGE_CURVE ( 'NONE', #15594, #28145, #15417, .T. ) ; +#33527 = FACE_OUTER_BOUND ( 'NONE', #1757, .T. ) ; +#33528 = CONICAL_SURFACE ( 'NONE', #28386, 10.50000000000009400, 0.7853981633974500600 ) ; +#33529 = ORIENTED_EDGE ( 'NONE', *, *, #52236, .F. ) ; +#33530 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, -1.205558038030003500 ) ) ; +#33531 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 81.62753447840887600, -28.38801640354855100 ) ) ; +#33532 = VERTEX_POINT ( 'NONE', #69545 ) ; +#33533 = CARTESIAN_POINT ( 'NONE', ( 9.769169305342948900, 70.65007990305404900, -28.43638873268713500 ) ) ; +#33534 = ORIENTED_EDGE ( 'NONE', *, *, #4815, .T. ) ; +#33535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33536 = EDGE_CURVE ( 'NONE', #36965, #78686, #941, .T. ) ; +#33537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33538 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55989, #12501, #25002, #68523 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003632803484388612100, 0.0005093674608222848900 ), + .UNSPECIFIED. ) ; +#33539 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500018900, 61.76337688193830600, -28.37223523914911300 ) ) ; +#33541 = CIRCLE ( 'NONE', #51281, 10.50000000000009600 ) ; +#33540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33542 = CARTESIAN_POINT ( 'NONE', ( -20.33617674473400800, 4.663823255264940600, -27.32428784736631800 ) ) ; +#33543 = ORIENTED_EDGE ( 'NONE', *, *, #25588, .F. ) ; +#33544 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 80.37705528805136600, -28.20555803802997700 ) ) ; +#33545 = EDGE_CURVE ( 'NONE', #32815, #45353, #67283, .T. ) ; +#33547 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 25.83333333333333900, 0.1341879241256075400 ) ) ; +#33546 = FACE_OUTER_BOUND ( 'NONE', #34274, .T. ) ; +#33548 = EDGE_CURVE ( 'NONE', #37106, #54001, #42319, .T. ) ; +#33549 = ORIENTED_EDGE ( 'NONE', *, *, #31489, .F. ) ; +#33550 = ORIENTED_EDGE ( 'NONE', *, *, #26450, .T. ) ; +#33551 = EDGE_LOOP ( 'NONE', ( #26393, #34944, #53033 ) ) ; +#33552 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#33553 = ORIENTED_EDGE ( 'NONE', *, *, #8973, .T. ) ; +#33554 = VERTEX_POINT ( 'NONE', #44745 ) ; +#33555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33556 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33557 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042475900, 17.00972971738997000, -28.70555803802992000 ) ) ; +#33558 = CIRCLE ( 'NONE', #44886, 10.50000000000009600 ) ; +#33559 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#33560 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715066800, 49.77966528189953300, -28.30868034705249800 ) ) ; +#33561 = AXIS2_PLACEMENT_3D ( 'NONE', #54099, #16857, #60392 ) ; +#33562 = EDGE_CURVE ( 'NONE', #42577, #55596, #77383, .T. ) ; +#33563 = CARTESIAN_POINT ( 'NONE', ( 10.95972934556084000, 28.72438272935921300, -28.30310183417006800 ) ) ; +#33564 = EDGE_CURVE ( 'NONE', #55730, #34194, #27776, .T. ) ; +#33565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33566 = EDGE_CURVE ( 'NONE', #37505, #31088, #52791, .T. ) ; +#33567 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995900, 21.18315603019280900, -28.70555803802998400 ) ) ; +#33568 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#33569 = EDGE_LOOP ( 'NONE', ( #23164, #38043, #78274, #56578 ) ) ; +#33570 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#33571 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 75.79999999999950000, -28.20555803803047800 ) ) ; +#33572 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33573 = AXIS2_PLACEMENT_3D ( 'NONE', #17632, #61160, #23890 ) ; +#33574 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 71.25732391202386400, -28.20555803803014400 ) ) ; +#33575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33576 = ORIENTED_EDGE ( 'NONE', *, *, #29558, .T. ) ; +#33577 = CONICAL_SURFACE ( 'NONE', #68966, 10.50000000000009600, 0.7853981633974500600 ) ; +#33578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20798, #51752, #8247, #64346 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534758500 ), + .UNSPECIFIED. ) ; +#33580 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78347, #22305, #10069, #53582 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885675027041900E-007, 0.0007987728781052874900 ), + .UNSPECIFIED. ) ; +#33581 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042473200, 48.50972971738993800, -28.70555803802997400 ) ) ; +#33582 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540451800, 52.51973550835661800, -28.70555803802997700 ) ) ; +#33583 = AXIS2_PLACEMENT_3D ( 'NONE', #41818, #48051, #35588 ) ; +#33584 = AXIS2_PLACEMENT_3D ( 'NONE', #6600, #37315, #50085 ) ; +#33585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21211, #71225, #9187, #52706 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839425547300 ), + .UNSPECIFIED. ) ; +#33586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33587 = AXIS2_PLACEMENT_3D ( 'NONE', #63812, #14020, #70034 ) ; +#33588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33590 = FACE_OUTER_BOUND ( 'NONE', #23218, .T. ) ; +#33591 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5415, #42647, #11685, #55166 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.321126039445492400E-016, 0.001246264537621268000 ), + .UNSPECIFIED. ) ; +#33592 = ORIENTED_EDGE ( 'NONE', *, *, #64301, .T. ) ; +#33593 = ORIENTED_EDGE ( 'NONE', *, *, #44263, .T. ) ; +#33594 = ADVANCED_FACE ( 'NONE', ( #60861 ), #71540, .F. ) ; +#33595 = CIRCLE ( 'NONE', #10890, 10.50000000000009600 ) ; +#33596 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 69.49999999999997200, -7.061964498581022400 ) ) ; +#33597 = AXIS2_PLACEMENT_3D ( 'NONE', #73154, #35873, #79406 ) ; +#33598 = EDGE_CURVE ( 'NONE', #79210, #45253, #7267, .T. ) ; +#33599 = EDGE_LOOP ( 'NONE', ( #66787, #12030, #64431 ) ) ; +#33600 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#33601 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33602 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33603 = ADVANCED_FACE ( 'NONE', ( #56939 ), #21897, .T. ) ; +#33604 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#33605 = FACE_OUTER_BOUND ( 'NONE', #12448, .T. ) ; +#33606 = FACE_OUTER_BOUND ( 'NONE', #3319, .T. ) ; +#33607 = EDGE_LOOP ( 'NONE', ( #39961, #57131, #12189 ) ) ; +#33608 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752696500, 79.51229806853761800, -28.47147304844873300 ) ) ; +#33609 = EDGE_CURVE ( 'NONE', #9345, #39774, #38315, .T. ) ; +#33610 = FACE_OUTER_BOUND ( 'NONE', #33366, .T. ) ; +#33611 = AXIS2_PLACEMENT_3D ( 'NONE', #16510, #47459, #53754 ) ; +#33612 = ORIENTED_EDGE ( 'NONE', *, *, #23451, .T. ) ; +#33613 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#33614 = ORIENTED_EDGE ( 'NONE', *, *, #28570, .F. ) ; +#33615 = CARTESIAN_POINT ( 'NONE', ( -3.371507771243924100, 71.43250300240228500, -28.25053031809460100 ) ) ; +#33617 = ADVANCED_FACE ( 'NONE', ( #23868 ), #69565, .F. ) ; +#33616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39137, #1879, #20679, #64221 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867009013600E-007, 0.001076778502991516300 ), + .UNSPECIFIED. ) ; +#33618 = CIRCLE ( 'NONE', #1395, 10.00000000000009200 ) ; +#33619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33620 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853689300, 51.25732391202355800, -28.20555803803030800 ) ) ; +#33621 = CARTESIAN_POINT ( 'NONE', ( 17.07349184251555500, 80.22161678501139200, -28.29547179040480700 ) ) ; +#33622 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.718202300015086300E-014, 0.0000000000000000000 ) ) ; +#33623 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 40.83333333333334300, 9.794441961969999600 ) ) ; +#33624 = CONICAL_SURFACE ( 'NONE', #1748, 10.00000000000009200, 0.7853981633974447300 ) ; +#33625 = EDGE_LOOP ( 'NONE', ( #28546, #15790, #36880, #15566 ) ) ; +#33626 = AXIS2_PLACEMENT_3D ( 'NONE', #33912, #52660, #15419 ) ; +#33627 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 61.43945992495533700, -28.34042301926885800 ) ) ; +#33628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33629 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533301000, 20.79130857014967400, -28.37223374938520900 ) ) ; +#33630 = ORIENTED_EDGE ( 'NONE', *, *, #73769, .T. ) ; +#33631 = ORIENTED_EDGE ( 'NONE', *, *, #23948, .T. ) ; +#33632 = ORIENTED_EDGE ( 'NONE', *, *, #78140, .F. ) ; +#33633 = CARTESIAN_POINT ( 'NONE', ( 17.38231690878860600, 41.70496220355530400, -28.41840204704135100 ) ) ; +#33634 = ORIENTED_EDGE ( 'NONE', *, *, #23684, .T. ) ; +#33635 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#33636 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368700, 70.79999999999998300, -28.55171188418375600 ) ) ; +#33637 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655937800, 17.92298334620740300, -28.20555803802993500 ) ) ; +#33638 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474190500, 28.23827450271715000, -28.47230003642276600 ) ) ; +#33639 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33640 = ORIENTED_EDGE ( 'NONE', *, *, #32066, .F. ) ; +#33641 = CONICAL_SURFACE ( 'NONE', #7250, 10.00000000000009200, 0.7853981633974447300 ) ; +#33642 = ORIENTED_EDGE ( 'NONE', *, *, #74513, .F. ) ; +#33643 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701827100, 75.79999999999977000, -28.70555803803014400 ) ) ; +#33644 = AXIS2_PLACEMENT_3D ( 'NONE', #55133, #17892, #61433 ) ; +#33645 = ORIENTED_EDGE ( 'NONE', *, *, #26911, .T. ) ; +#33646 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985164500, 34.09761904761935400, -28.70555803802995200 ) ) ; +#33647 = EDGE_LOOP ( 'NONE', ( #38485, #43310, #37580 ) ) ; +#33648 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529600, 45.54999999999999700, -28.20555803802996700 ) ) ; +#33649 = CIRCLE ( 'NONE', #77423, 9.500000000000095900 ) ; +#33650 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 70.90050506338820900, -28.70555803802997700 ) ) ; +#33651 = EDGE_CURVE ( 'NONE', #15394, #21498, #23912, .T. ) ; +#33652 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 3.166666666666684300, -9.205558038030003900 ) ) ; +#33653 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.70389005397394300, -28.37519436813181200 ) ) ; +#33654 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 57.92318720225497900, -28.70555803802997700 ) ) ; +#33655 = ORIENTED_EDGE ( 'NONE', *, *, #34902, .T. ) ; +#33656 = LINE ( 'NONE', #61174, #48214 ) ; +#33657 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33658 = PLANE ( 'NONE', #4421 ) ; +#33659 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990200, 18.52242369685793800, -28.53861367218588900 ) ) ; +#33660 = PLANE ( 'NONE', #11834 ) ; +#33661 = CARTESIAN_POINT ( 'NONE', ( -10.82234497820296500, 7.660694734812120800, -28.43770179755625800 ) ) ; +#33662 = CARTESIAN_POINT ( 'NONE', ( -2.881064473890916600, 60.49763722318510900, -28.32100408376079800 ) ) ; +#33663 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#33664 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#33665 = EDGE_CURVE ( 'NONE', #66852, #59492, #9412, .T. ) ; +#33666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33667 = EDGE_CURVE ( 'NONE', #29601, #45862, #38398, .T. ) ; +#33668 = CIRCLE ( 'NONE', #14674, 10.50000000000009600 ) ; +#33669 = FACE_OUTER_BOUND ( 'NONE', #38994, .T. ) ; +#33670 = CARTESIAN_POINT ( 'NONE', ( 1.040834085586084300E-014, 48.12623792124938400, -28.70555803802996700 ) ) ; +#33671 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7650, #51150, #1677, #45162 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589649801538064000E-007, 0.0003301105057474669000 ), + .UNSPECIFIED. ) ; +#33672 = ORIENTED_EDGE ( 'NONE', *, *, #28366, .T. ) ; +#33673 = CARTESIAN_POINT ( 'NONE', ( -9.254657264815460100, 20.50380841767820800, -28.64142799534453200 ) ) ; +#33674 = ORIENTED_EDGE ( 'NONE', *, *, #39010, .T. ) ; +#33675 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466676800, 49.30869142985029900, -28.37223374938523800 ) ) ; +#33676 = CIRCLE ( 'NONE', #33761, 10.00000000000009600 ) ; +#33677 = AXIS2_PLACEMENT_3D ( 'NONE', #51100, #7618, #50854 ) ; +#33678 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 61.62753447840886900, -28.38801640354855800 ) ) ; +#33679 = EDGE_CURVE ( 'NONE', #28300, #42850, #75731, .T. ) ; +#33680 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621800, 50.33106028708540700, -28.57333386111662300 ) ) ; +#33681 = EDGE_CURVE ( 'NONE', #54184, #45518, #73485, .T. ) ; +#33682 = ORIENTED_EDGE ( 'NONE', *, *, #22212, .T. ) ; +#33683 = ADVANCED_FACE ( 'NONE', ( #75432 ), #3373, .F. ) ; +#33684 = EDGE_CURVE ( 'NONE', #64791, #18855, #61324, .T. ) ; +#33685 = CONICAL_SURFACE ( 'NONE', #29680, 10.00000000000009600, 0.7853981633974447300 ) ; +#33686 = AXIS2_PLACEMENT_3D ( 'NONE', #56418, #62696, #12926 ) ; +#33687 = CONICAL_SURFACE ( 'NONE', #35072, 10.00000000000009400, 0.7853981633974447300 ) ; +#33688 = ORIENTED_EDGE ( 'NONE', *, *, #22508, .T. ) ; +#33689 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33690 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 45.55000000000000400, -28.20555803802996700 ) ) ; +#33691 = VERTEX_POINT ( 'NONE', #77681 ) ; +#33692 = ORIENTED_EDGE ( 'NONE', *, *, #16281, .T. ) ; +#33693 = ADVANCED_FACE ( 'NONE', ( #5353 ), #51035, .T. ) ; +#33694 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 46.83333333333333600, -2.545304000185615800 ) ) ; +#33695 = AXIS2_PLACEMENT_3D ( 'NONE', #43394, #6155, #49633 ) ; +#33696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33697 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280155100, 70.69966441803892100, -28.70555803802997700 ) ) ; +#33698 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484629900, 90.22161678501180400, -28.29547179040443800 ) ) ; +#33699 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 11.83333333333333900, -3.349151577478984600 ) ) ; +#33700 = CONICAL_SURFACE ( 'NONE', #58009, 10.50000000000009600, 0.7853981633974482800 ) ; +#33701 = EDGE_LOOP ( 'NONE', ( #50620, #62562, #73685, #61469 ) ) ; +#33702 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#33703 = ORIENTED_EDGE ( 'NONE', *, *, #75515, .T. ) ; +#33704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33705 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#33706 = EDGE_LOOP ( 'NONE', ( #64615, #28052, #55692, #72382 ) ) ; +#33707 = ORIENTED_EDGE ( 'NONE', *, *, #52122, .T. ) ; +#33708 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 49.16666666666667100, -4.152999154772358800 ) ) ; +#33709 = ORIENTED_EDGE ( 'NONE', *, *, #45793, .F. ) ; +#33710 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33711 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33712 = CONICAL_SURFACE ( 'NONE', #17764, 10.00000000000009600, 0.7853981633974447300 ) ; +#33713 = CONICAL_SURFACE ( 'NONE', #58230, 10.50000000000009600, 0.7853981633974518300 ) ; +#33714 = VERTEX_POINT ( 'NONE', #53185 ) ; +#33715 = EDGE_CURVE ( 'NONE', #8560, #55143, #46794, .T. ) ; +#33716 = EDGE_LOOP ( 'NONE', ( #982, #14435, #67919 ) ) ; +#33717 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33718 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#33719 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#33721 = ADVANCED_FACE ( 'NONE', ( #19949 ), #17990, .F. ) ; +#33720 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #587, #50071, #19370, #62913 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397671699400E-007, 0.0003301092607748149700 ), + .UNSPECIFIED. ) ; +#33722 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171904000, 61.13768531620282000, -28.37082013777859400 ) ) ; +#33723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33724 = ORIENTED_EDGE ( 'NONE', *, *, #59942, .T. ) ; +#33725 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33726 = LINE ( 'NONE', #24308, #54154 ) ; +#33727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33728 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33730 = EDGE_CURVE ( 'NONE', #72417, #74319, #32355, .T. ) ; +#33729 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35250, #72499, #47694, #10476 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866760810700E-007, 0.001076778502991272600 ), + .UNSPECIFIED. ) ; +#33731 = ORIENTED_EDGE ( 'NONE', *, *, #37868, .F. ) ; +#33732 = FACE_OUTER_BOUND ( 'NONE', #22764, .T. ) ; +#33733 = CARTESIAN_POINT ( 'NONE', ( 3.757024425534577700, 90.16517473503394300, -28.29551658696708900 ) ) ; +#33734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33735 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #76978 ) ; +#33736 = AXIS2_PLACEMENT_3D ( 'NONE', #39934, #2644, #46156 ) ; +#33737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33738 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#33739 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41076, #47562, #53851, #16601 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376913000 ), + .UNSPECIFIED. ) ; +#33740 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33741 = FACE_OUTER_BOUND ( 'NONE', #74342, .T. ) ; +#33742 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33743 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33744 = ORIENTED_EDGE ( 'NONE', *, *, #37223, .T. ) ; +#33745 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37648, #139, #50154, #12939 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362990900, 0.0007987676590766491900 ), + .UNSPECIFIED. ) ; +#33746 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748435600, 51.37838321498787100, -28.29547179040470400 ) ) ; +#33747 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 80.13716795162659400, -28.48697406221667400 ) ) ; +#33748 = AXIS2_PLACEMENT_3D ( 'NONE', #34654, #78169, #40893 ) ; +#33749 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 52.66666666666667100, 5.722645192245505700 ) ) ; +#33750 = CONICAL_SURFACE ( 'NONE', #70898, 10.50000000000009600, 0.7853981633974482800 ) ; +#33751 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#33752 = ORIENTED_EDGE ( 'NONE', *, *, #19737, .T. ) ; +#33753 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33754 = CIRCLE ( 'NONE', #17031, 10.50000000000009600 ) ; +#33755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33756 = EDGE_LOOP ( 'NONE', ( #11839, #8636, #50022, #21406 ) ) ; +#33757 = ORIENTED_EDGE ( 'NONE', *, *, #17607, .F. ) ; +#33758 = FACE_OUTER_BOUND ( 'NONE', #33158, .T. ) ; +#33759 = CARTESIAN_POINT ( 'NONE', ( 9.530136888809634500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#33760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33761 = AXIS2_PLACEMENT_3D ( 'NONE', #53391, #16136, #59666 ) ; +#33762 = ORIENTED_EDGE ( 'NONE', *, *, #74892, .F. ) ; +#33763 = FACE_OUTER_BOUND ( 'NONE', #2018, .T. ) ; +#33764 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.23796787468681700, -28.38801640354855800 ) ) ; +#33765 = CIRCLE ( 'NONE', #43823, 10.00000000000009200 ) ; +#33766 = EDGE_LOOP ( 'NONE', ( #6970, #18419, #28735, #64274, #64889 ) ) ; +#33767 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 46.33333333333333600, -5.205558038030008400 ) ) ; +#33768 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47424, #59729, #16473, #59993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884803000 ), + .UNSPECIFIED. ) ; +#33770 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33771 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 17.83333333333335000, -9.205558038030003900 ) ) ; +#33772 = ORIENTED_EDGE ( 'NONE', *, *, #76917, .F. ) ; +#33773 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941500, 90.13716795162659400, -28.48697406221667800 ) ) ; +#33774 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69186, #25703, #906, #44383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648283205710100E-007, 0.0004318378175229103400 ), + .UNSPECIFIED. ) ; +#33775 = CARTESIAN_POINT ( 'NONE', ( 15.86238361814214300, 17.92067263347027500, -28.67075088557336900 ) ) ; +#33776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33777 = ADVANCED_FACE ( 'NONE', ( #36464 ), #65694, .T. ) ; +#33778 = CONICAL_SURFACE ( 'NONE', #25132, 10.00000000000009200, 0.7853981633974415100 ) ; +#33779 = VERTEX_POINT ( 'NONE', #22465 ) ; +#33780 = ORIENTED_EDGE ( 'NONE', *, *, #24041, .F. ) ; +#33781 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274713600, 14.05000000000000800, -28.20555803802992800 ) ) ; +#33782 = ORIENTED_EDGE ( 'NONE', *, *, #39872, .F. ) ; +#33783 = ORIENTED_EDGE ( 'NONE', *, *, #2804, .T. ) ; +#33784 = EDGE_CURVE ( 'NONE', #7230, #52871, #17906, .T. ) ; +#33785 = ORIENTED_EDGE ( 'NONE', *, *, #66926, .T. ) ; +#33786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33787 = CONICAL_SURFACE ( 'NONE', #57301, 10.50000000000009600, 0.7853981633974500600 ) ; +#33788 = ADVANCED_FACE ( 'NONE', ( #40373 ), #32576, .T. ) ; +#33789 = ORIENTED_EDGE ( 'NONE', *, *, #50187, .F. ) ; +#33790 = EDGE_CURVE ( 'NONE', #4381, #6017, #3421, .T. ) ; +#33791 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#33792 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180452700, 71.65075715145293600, -28.20555803802997700 ) ) ; +#33793 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33794 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 61.33333333333334300, 5.722645192245503900 ) ) ; +#33795 = EDGE_CURVE ( 'NONE', #25026, #74524, #54971, .T. ) ; +#33796 = CONICAL_SURFACE ( 'NONE', #65896, 10.00000000000009600, 0.7853981633974482800 ) ; +#33797 = AXIS2_PLACEMENT_3D ( 'NONE', #42948, #48928, #5710 ) ; +#33798 = CARTESIAN_POINT ( 'NONE', ( -16.81665446367276900, 6.893879557620969000, -28.20555803802992800 ) ) ; +#33799 = ORIENTED_EDGE ( 'NONE', *, *, #25359, .T. ) ; +#33800 = ADVANCED_FACE ( 'NONE', ( #49095 ), #64861, .T. ) ; +#33801 = VERTEX_POINT ( 'NONE', #39605 ) ; +#33802 = CARTESIAN_POINT ( 'NONE', ( -3.447244440452830200, 91.89098624823346000, -28.70555803803000600 ) ) ; +#33803 = CIRCLE ( 'NONE', #52140, 10.50000000000009600 ) ; +#33804 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33807 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 70.34267608797567600, -28.20555803802997700 ) ) ; +#33806 = CONICAL_SURFACE ( 'NONE', #24590, 10.50000000000009400, 0.7853981633974500600 ) ; +#33808 = AXIS2_PLACEMENT_3D ( 'NONE', #59945, #47648, #78714 ) ; +#33809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33810 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000381000, 79.63176086632779500, -28.70555803802999500 ) ) ; +#33812 = ORIENTED_EDGE ( 'NONE', *, *, #11985, .T. ) ; +#33811 = EDGE_CURVE ( 'NONE', #52786, #66932, #69751, .T. ) ; +#33813 = EDGE_CURVE ( 'NONE', #39774, #35408, #53017, .T. ) ; +#33814 = ADVANCED_FACE ( 'NONE', ( #579 ), #15191, .T. ) ; +#33815 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33817 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567156700, 41.24660241562189400, -28.20555803802996700 ) ) ; +#33816 = AXIS2_PLACEMENT_3D ( 'NONE', #9209, #40227, #46195 ) ; +#33818 = CARTESIAN_POINT ( 'NONE', ( -16.08618408563633300, 7.827631828727433600, -28.54394830537789200 ) ) ; +#33819 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 23.66666666666668600, -3.705558038030004400 ) ) ; +#33820 = FACE_OUTER_BOUND ( 'NONE', #45939, .T. ) ; +#33821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33822 = ORIENTED_EDGE ( 'NONE', *, *, #11291, .T. ) ; +#33823 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33824 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68931, #25440, #37911, #654 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0007677775503743731200 ), + .UNSPECIFIED. ) ; +#33825 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985000, 81.25732391202392100, -28.20555803802997700 ) ) ; +#33826 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#33827 = AXIS2_PLACEMENT_3D ( 'NONE', #31816, #38288, #1038 ) ; +#33828 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550015200, 79.83662311806124000, -28.37223523914948900 ) ) ; +#33829 = EDGE_LOOP ( 'NONE', ( #19430, #34702, #45754, #6649 ) ) ; +#33830 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21552, #77286, #27820, #71297 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927769500 ), + .UNSPECIFIED. ) ; +#33831 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124977800, 76.46717019299477200, -28.53914313452736800 ) ) ; +#33832 = EDGE_CURVE ( 'NONE', #45917, #77938, #31747, .T. ) ; +#33833 = ADVANCED_FACE ( 'NONE', ( #48248 ), #46286, .F. ) ; +#33834 = CIRCLE ( 'NONE', #26400, 9.500000000000099500 ) ; +#33835 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#33836 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430900, 20.67701665379241000, -28.20555803802994500 ) ) ; +#33837 = AXIS2_PLACEMENT_3D ( 'NONE', #32567, #76080, #38795 ) ; +#33838 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33839 = AXIS2_PLACEMENT_3D ( 'NONE', #2874, #9111, #40140 ) ; +#33840 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047600, 18.29722425778767600, -28.32715733700498000 ) ) ; +#33841 = EDGE_LOOP ( 'NONE', ( #8382, #50609, #53611, #11732 ) ) ; +#33842 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33843 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33844 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75117, #568, #44064, #6837 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721136000, 0.0008252574424209423600 ), + .UNSPECIFIED. ) ; +#33846 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#33847 = LINE ( 'NONE', #40667, #52298 ) ; +#33848 = ORIENTED_EDGE ( 'NONE', *, *, #26768, .T. ) ; +#33849 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33850 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217475100, 61.43945992495532900, -28.34042301926881200 ) ) ; +#33851 = AXIS2_PLACEMENT_3D ( 'NONE', #39782, #2500, #46018 ) ; +#33852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33853 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686887000, 71.58005252438356100, -28.24986299608882200 ) ) ; +#33854 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548966500, 41.44069092601378700, -28.35186440610859300 ) ) ; +#33855 = VERTEX_POINT ( 'NONE', #78552 ) ; +#33856 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#33857 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507625400, 10.52620220503712600, -28.70555803802992800 ) ) ; +#33858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32001, #25765, #38224, #970 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967423900E-007, 0.0008724366121409701600 ), + .UNSPECIFIED. ) ; +#33859 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752697200, 89.51229806853761800, -28.47147304844872900 ) ) ; +#33860 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33861 = FACE_OUTER_BOUND ( 'NONE', #32925, .T. ) ; +#33862 = CONICAL_SURFACE ( 'NONE', #73041, 10.50000000000009600, 0.7853981633974500600 ) ; +#33863 = AXIS2_PLACEMENT_3D ( 'NONE', #36654, #80190, #42904 ) ; +#33864 = ORIENTED_EDGE ( 'NONE', *, *, #74650, .F. ) ; +#33865 = ORIENTED_EDGE ( 'NONE', *, *, #57875, .F. ) ; +#33866 = ORIENTED_EDGE ( 'NONE', *, *, #15671, .F. ) ; +#33867 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .T. ) ; +#33868 = VERTEX_POINT ( 'NONE', #35030 ) ; +#33869 = EDGE_LOOP ( 'NONE', ( #13748, #5728, #40394, #55310, #31287, #53821, #30046 ) ) ; +#33870 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 83.65857157145681800, -28.20555803803047800 ) ) ; +#33871 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 67.33333333333334300, 2.794441961969998300 ) ) ; +#33872 = AXIS2_PLACEMENT_3D ( 'NONE', #50858, #13657, #57156 ) ; +#33873 = ORIENTED_EDGE ( 'NONE', *, *, #18412, .T. ) ; +#33874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26100, #19830, #57090, #69580 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711248893500E-007, 0.0008482615949371491400 ), + .UNSPECIFIED. ) ; +#33875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33876 = EDGE_CURVE ( 'NONE', #42918, #50428, #55285, .T. ) ; +#33877 = ORIENTED_EDGE ( 'NONE', *, *, #43172, .T. ) ; +#33878 = CONICAL_SURFACE ( 'NONE', #48525, 10.50000000000009600, 0.7853981633974500600 ) ; +#33879 = AXIS2_PLACEMENT_3D ( 'NONE', #58308, #21063, #64594 ) ; +#33880 = ORIENTED_EDGE ( 'NONE', *, *, #60027, .F. ) ; +#33881 = ORIENTED_EDGE ( 'NONE', *, *, #44441, .F. ) ; +#33882 = CARTESIAN_POINT ( 'NONE', ( -9.438174915909117500, 30.98385710212512100, -28.57719681746177500 ) ) ; +#33883 = CONICAL_SURFACE ( 'NONE', #55786, 10.50000000000009600, 0.7853981633974500600 ) ; +#33884 = ADVANCED_FACE ( 'NONE', ( #34557 ), #13263, .F. ) ; +#33885 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#33887 = ORIENTED_EDGE ( 'NONE', *, *, #59831, .F. ) ; +#33886 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33888 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736748100, 14.04999999999975700, -28.70555803803009500 ) ) ; +#33889 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#33890 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 38.66666666666667100, -10.73183747965883100 ) ) ; +#33891 = EDGE_CURVE ( 'NONE', #70561, #42191, #29837, .T. ) ; +#33892 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492456300, 21.02620220503760300, -28.70555803802994200 ) ) ; +#33893 = CONICAL_SURFACE ( 'NONE', #11951, 10.00000000000009400, 0.7853981633974447300 ) ; +#33894 = ORIENTED_EDGE ( 'NONE', *, *, #50187, .T. ) ; +#33895 = ADVANCED_FACE ( 'NONE', ( #62907 ), #44331, .T. ) ; +#33896 = EDGE_CURVE ( 'NONE', #2326, #48799, #60949, .T. ) ; +#33897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33898 = ORIENTED_EDGE ( 'NONE', *, *, #21424, .T. ) ; +#33899 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33900 = CARTESIAN_POINT ( 'NONE', ( -9.881082274201249400, 51.10238820582982600, -28.32098513914462500 ) ) ; +#33901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33903 = ADVANCED_FACE ( 'NONE', ( #67636 ), #16776, .T. ) ; +#33904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33905 = EDGE_CURVE ( 'NONE', #39795, #76994, #1424, .T. ) ; +#33906 = ADVANCED_FACE ( 'NONE', ( #77475 ), #42411, .F. ) ; +#33907 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725305700, 35.05000000000000400, -28.20555803802995200 ) ) ; +#33908 = EDGE_CURVE ( 'NONE', #73200, #9523, #40839, .T. ) ; +#33909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33910 = AXIS2_PLACEMENT_3D ( 'NONE', #56374, #19121, #62655 ) ; +#33911 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 80.16349705304865800, -28.30782889147482400 ) ) ; +#33912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33913 = FACE_OUTER_BOUND ( 'NONE', #51895, .T. ) ; +#33914 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 1.000000000000000900, 6.794441961969995200 ) ) ; +#33915 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306343900, 49.50210619075125600, -28.25343951603346000 ) ) ; +#33916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33918 = EDGE_LOOP ( 'NONE', ( #42876, #7757, #61507, #23069 ) ) ; +#33919 = ORIENTED_EDGE ( 'NONE', *, *, #3281, .T. ) ; +#33920 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#33921 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526989700, 60.01262610361147400, -28.29936525552464800 ) ) ; +#33922 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33923 = AXIS2_PLACEMENT_3D ( 'NONE', #70544, #8508, #52012 ) ; +#33924 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#33925 = EDGE_CURVE ( 'NONE', #65030, #63610, #26404, .T. ) ; +#33926 = EDGE_CURVE ( 'NONE', #55203, #39289, #79439, .T. ) ; +#33927 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544432300, 79.72166103827326800, -28.53892303408230200 ) ) ; +#33928 = EDGE_CURVE ( 'NONE', #9068, #12637, #11928, .T. ) ; +#33929 = CONICAL_SURFACE ( 'NONE', #63969, 10.00000000000009200, 0.7853981633974447300 ) ; +#33930 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41293, #16564, #35344, #78863 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696916579200E-007, 0.0008724363063897077500 ), + .UNSPECIFIED. ) ; +#33931 = FACE_OUTER_BOUND ( 'NONE', #21393, .T. ) ; +#33932 = ORIENTED_EDGE ( 'NONE', *, *, #20297, .T. ) ; +#33933 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33934 = ORIENTED_EDGE ( 'NONE', *, *, #14384, .F. ) ; +#33935 = AXIS2_PLACEMENT_3D ( 'NONE', #23515, #67019, #29798 ) ; +#33936 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#33937 = ORIENTED_EDGE ( 'NONE', *, *, #42484, .T. ) ; +#33938 = CIRCLE ( 'NONE', #6411, 9.500000000000099500 ) ; +#33939 = VERTEX_POINT ( 'NONE', #11341 ) ; +#33940 = ORIENTED_EDGE ( 'NONE', *, *, #66242, .F. ) ; +#33941 = ORIENTED_EDGE ( 'NONE', *, *, #79438, .T. ) ; +#33942 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534556000, 19.60079448659600100, -28.70555803802994200 ) ) ; +#33943 = ORIENTED_EDGE ( 'NONE', *, *, #41543, .T. ) ; +#33944 = EDGE_LOOP ( 'NONE', ( #65182, #70342, #1819, #27853, #32236, #32840 ) ) ; +#33945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33946 = EDGE_CURVE ( 'NONE', #72943, #25677, #78241, .T. ) ; +#33947 = AXIS2_PLACEMENT_3D ( 'NONE', #61429, #24150, #67658 ) ; +#33948 = AXIS2_PLACEMENT_3D ( 'NONE', #46112, #8841, #52361 ) ; +#33949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33950 = ORIENTED_EDGE ( 'NONE', *, *, #20640, .T. ) ; +#33951 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47048, #3542, #65863, #28636 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610248900, 0.0004765929656973524000 ), + .UNSPECIFIED. ) ; +#33952 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345123700, 60.27440177985806700, -28.29986836858020600 ) ) ; +#33953 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#33954 = FACE_OUTER_BOUND ( 'NONE', #60384, .T. ) ; +#33956 = VERTEX_POINT ( 'NONE', #4780 ) ; +#33955 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#33957 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#33958 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 10.33333333333335300, -10.73183747965883100 ) ) ; +#33959 = ORIENTED_EDGE ( 'NONE', *, *, #6404, .F. ) ; +#33960 = VERTEX_POINT ( 'NONE', #5338 ) ; +#33961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52451, #58735, #33989, #77507 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471652208440900E-007, 0.0002673661813021784000 ), + .UNSPECIFIED. ) ; +#33962 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230956100, 50.28860447109612200, -28.53900456328627700 ) ) ; +#33963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33964 = CONICAL_SURFACE ( 'NONE', #27105, 10.00000000000009400, 0.7853981633974447300 ) ; +#33965 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 44.66666666666667100, 1.294441961969997200 ) ) ; +#33966 = AXIS2_PLACEMENT_3D ( 'NONE', #66547, #10524, #23042 ) ; +#33967 = ORIENTED_EDGE ( 'NONE', *, *, #22964, .F. ) ; +#33968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33969 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80634, #37090, #74400, #43350 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390012246100E-007, 0.0008082646680356939800 ), + .UNSPECIFIED. ) ; +#33970 = EDGE_LOOP ( 'NONE', ( #57274, #79086, #51938, #12622 ) ) ; +#33971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33972 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 9.666666666666673200, 2.794441961969992100 ) ) ; +#33973 = AXIS2_PLACEMENT_3D ( 'NONE', #22312, #9805, #47032 ) ; +#33974 = CONICAL_SURFACE ( 'NONE', #33258, 10.00000000000009400, 0.7853981633974447300 ) ; +#33975 = VERTEX_POINT ( 'NONE', #79875 ) ; +#33976 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489605100, 39.15930907398613000, -28.35186440610853600 ) ) ; +#33977 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819192900, 51.65075715145311400, -28.20555803802997700 ) ) ; +#33978 = EDGE_CURVE ( 'NONE', #9705, #74194, #63794, .T. ) ; +#33979 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 47.00000000000001400, -1.205558038030002800 ) ) ; +#33980 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#33981 = EDGE_LOOP ( 'NONE', ( #66949, #15676, #24717, #50707, #23440 ) ) ; +#33982 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263255400, 35.04999999999995500, -28.70555803802995200 ) ) ; +#33983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33984 = AXIS2_PLACEMENT_3D ( 'NONE', #69738, #32480, #75995 ) ; +#33985 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475900, 14.04999999999976600, -28.20555803803009500 ) ) ; +#33986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#33988 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339104700, 51.46283204837309500, -28.48697406221716100 ) ) ; +#33989 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.53751622186547400, -28.32723995587591800 ) ) ; +#33990 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#33991 = AXIS2_PLACEMENT_3D ( 'NONE', #25365, #19083, #68862 ) ; +#33992 = CONICAL_SURFACE ( 'NONE', #19163, 10.00000000000009200, 0.7853981633974447300 ) ; +#33993 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 43.67681279774500800, -28.70555803802997700 ) ) ; +#33994 = FACE_OUTER_BOUND ( 'NONE', #41982, .T. ) ; +#33995 = ORIENTED_EDGE ( 'NONE', *, *, #41459, .F. ) ; +#33996 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339032400, 81.46283204837304500, -28.48697406221690500 ) ) ; +#33998 = EDGE_LOOP ( 'NONE', ( #50702, #20213, #6395 ) ) ; +#33997 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#33999 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 41.24660241562189400, -28.20555803802996700 ) ) ; +#34000 = ADVANCED_FACE ( 'NONE', ( #58972 ), #73582, .F. ) ; +#34001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34002 = ORIENTED_EDGE ( 'NONE', *, *, #14244, .F. ) ; +#34003 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 58.39962244433173300, -28.53664883431610000 ) ) ; +#34004 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69195, #25709, #38161, #913 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951569742400E-007, 0.0007331043932795766000 ), + .UNSPECIFIED. ) ; +#34005 = ADVANCED_FACE ( 'NONE', ( #11305 ), #40471, .F. ) ; +#34006 = CIRCLE ( 'NONE', #76923, 10.50000000000009600 ) ; +#34007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34008 = ORIENTED_EDGE ( 'NONE', *, *, #78318, .T. ) ; +#34009 = CONICAL_SURFACE ( 'NONE', #57302, 10.00000000000009200, 0.7853981633974447300 ) ; +#34010 = VERTEX_POINT ( 'NONE', #49082 ) ; +#34011 = ORIENTED_EDGE ( 'NONE', *, *, #31800, .F. ) ; +#34012 = EDGE_CURVE ( 'NONE', #61277, #64371, #75512, .T. ) ; +#34013 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 50.50000000000000700, -7.061964498581022400 ) ) ; +#34014 = ORIENTED_EDGE ( 'NONE', *, *, #631, .T. ) ; +#34015 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 42.97376207875060300, -28.70555803802997700 ) ) ; +#34016 = CIRCLE ( 'NONE', #44362, 9.500000000000099500 ) ; +#34017 = EDGE_CURVE ( 'NONE', #11959, #23277, #49279, .T. ) ; +#34018 = EDGE_LOOP ( 'NONE', ( #36731, #25426, #22245, #80201 ) ) ; +#34020 = VERTEX_POINT ( 'NONE', #18116 ) ; +#34019 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#34021 = EDGE_LOOP ( 'NONE', ( #26552, #9370, #6991, #15565 ) ) ; +#34022 = EDGE_LOOP ( 'NONE', ( #38473, #42910, #60115, #62846 ) ) ; +#34023 = ORIENTED_EDGE ( 'NONE', *, *, #72180, .F. ) ; +#34024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34025 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543600600, 70.07527064970112500, -28.39317435246123000 ) ) ; +#34027 = EDGE_LOOP ( 'NONE', ( #43581, #55831, #41112, #29311 ) ) ; +#34026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34029 = EDGE_CURVE ( 'NONE', #30244, #14523, #57036, .T. ) ; +#34030 = ADVANCED_FACE ( 'NONE', ( #27866 ), #55062, .T. ) ; +#34031 = ORIENTED_EDGE ( 'NONE', *, *, #54982, .T. ) ; +#34032 = FACE_OUTER_BOUND ( 'NONE', #67358, .T. ) ; +#34033 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660918100, 61.46283204837310200, -28.48697406221710100 ) ) ; +#34034 = EDGE_CURVE ( 'NONE', #27088, #34788, #34866, .T. ) ; +#34035 = ORIENTED_EDGE ( 'NONE', *, *, #54873, .T. ) ; +#34036 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006900, 48.50000000000000000, 4.650848422521014500 ) ) ; +#34037 = EDGE_CURVE ( 'NONE', #66793, #49013, #7364, .T. ) ; +#34038 = VERTEX_POINT ( 'NONE', #55896 ) ; +#34039 = EDGE_LOOP ( 'NONE', ( #50520, #40911, #77251, #55530 ) ) ; +#34040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34041 = EDGE_LOOP ( 'NONE', ( #40438, #40977, #17777, #47326 ) ) ; +#34042 = ORIENTED_EDGE ( 'NONE', *, *, #31999, .F. ) ; +#34043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34044 = CIRCLE ( 'NONE', #1422, 10.00000000000009400 ) ; +#34045 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 15.66666666666667700, 5.722645192245505700 ) ) ; +#34046 = AXIS2_PLACEMENT_3D ( 'NONE', #63259, #69477, #19720 ) ; +#34047 = ORIENTED_EDGE ( 'NONE', *, *, #4961, .T. ) ; +#34048 = EDGE_CURVE ( 'NONE', #63715, #55826, #20397, .T. ) ; +#34049 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 89.28967419478897200, -28.59353418718932400 ) ) ; +#34050 = EDGE_CURVE ( 'NONE', #71197, #68875, #5941, .T. ) ; +#34051 = EDGE_CURVE ( 'NONE', #56191, #23320, #25909, .T. ) ; +#34052 = ORIENTED_EDGE ( 'NONE', *, *, #71066, .T. ) ; +#34053 = AXIS2_PLACEMENT_3D ( 'NONE', #29879, #73357, #36094 ) ; +#34054 = CIRCLE ( 'NONE', #46218, 9.500000000000099500 ) ; +#34055 = ORIENTED_EDGE ( 'NONE', *, *, #23312, .T. ) ; +#34056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47015, #3512, #16042, #59580 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711422351500E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#34057 = ORIENTED_EDGE ( 'NONE', *, *, #23248, .F. ) ; +#34058 = CARTESIAN_POINT ( 'NONE', ( 3.628581783286484200, 70.16749699759769500, -28.25056166218025000 ) ) ; +#34059 = ORIENTED_EDGE ( 'NONE', *, *, #35192, .T. ) ; +#34060 = AXIS2_PLACEMENT_3D ( 'NONE', #1957, #45444, #8198 ) ; +#34061 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 19.00000000000001400, -6.205558038030003100 ) ) ; +#34062 = AXIS2_PLACEMENT_3D ( 'NONE', #9721, #53232, #15982 ) ; +#34063 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851495600, 23.59761904761906600, -28.70555803802994200 ) ) ; +#34064 = AXIS2_PLACEMENT_3D ( 'NONE', #55315, #42801, #49038 ) ; +#34065 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#34066 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 59.16666666666664300, -9.205558038030003900 ) ) ; +#34067 = CARTESIAN_POINT ( 'NONE', ( -3.782121345655931300E-014, 87.70389005397396400, -28.37519436813184000 ) ) ; +#34068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34069 = CONICAL_SURFACE ( 'NONE', #26105, 10.50000000000009600, 0.7853981633974500600 ) ; +#34070 = CIRCLE ( 'NONE', #44618, 9.500000000000101300 ) ; +#34071 = ORIENTED_EDGE ( 'NONE', *, *, #60393, .F. ) ; +#34072 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#34073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34074 = PLANE ( 'NONE', #63049 ) ; +#34075 = AXIS2_PLACEMENT_3D ( 'NONE', #21359, #64891, #27613 ) ; +#34076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34077 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34078 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39708, #8417, #8684, #52188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170519743300, 0.004414519045339624800 ), + .UNSPECIFIED. ) ; +#34079 = ADVANCED_FACE ( 'NONE', ( #23957 ), #69664, .T. ) ; +#34080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34082 = CIRCLE ( 'NONE', #64925, 10.50000000000009600 ) ; +#34083 = ORIENTED_EDGE ( 'NONE', *, *, #17968, .F. ) ; +#34084 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281063900, 90.46231468379673400, -28.37082013777818900 ) ) ; +#34085 = CARTESIAN_POINT ( 'NONE', ( -9.550579058145672200, 90.93286564902760500, -28.65428819219280900 ) ) ; +#34086 = EDGE_LOOP ( 'NONE', ( #514, #46107, #78848, #36906, #45696, #61949 ) ) ; +#34087 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 21.50000000000000400, 2.454695999814380200 ) ) ; +#34088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34089 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.22294471194858900, -28.20555803802995200 ) ) ; +#34091 = EDGE_CURVE ( 'NONE', #79387, #71219, #72270, .T. ) ; +#34090 = ORIENTED_EDGE ( 'NONE', *, *, #19293, .T. ) ; +#34092 = CIRCLE ( 'NONE', #40711, 10.00000000000009200 ) ; +#34093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34094 = ORIENTED_EDGE ( 'NONE', *, *, #35829, .T. ) ; +#34095 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34096 = AXIS2_PLACEMENT_3D ( 'NONE', #38104, #855, #44335 ) ; +#34097 = ORIENTED_EDGE ( 'NONE', *, *, #4416, .F. ) ; +#34098 = ORIENTED_EDGE ( 'NONE', *, *, #18677, .F. ) ; +#34099 = ORIENTED_EDGE ( 'NONE', *, *, #75834, .T. ) ; +#34100 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385264700, 41.60677350908864000, -28.30799595738874100 ) ) ; +#34101 = ORIENTED_EDGE ( 'NONE', *, *, #35495, .T. ) ; +#34102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34103 = ADVANCED_FACE ( 'NONE', ( #9318 ), #36563, .T. ) ; +#34104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34106 = CARTESIAN_POINT ( 'NONE', ( -17.36049707220280400, 41.43250300240230600, -28.25438406275899800 ) ) ; +#34107 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#34108 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000000, 47.67143691309412600, -28.36981695106783300 ) ) ; +#34109 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34110 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44313, #19622, #38349, #1102 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002333577134203751700 ), + .UNSPECIFIED. ) ; +#34111 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875031100, 76.46717019299457300, -28.53914313452775200 ) ) ; +#34112 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#34113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34114 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 41.24660241562189400, -28.20555803802996700 ) ) ; +#34115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34116 = CIRCLE ( 'NONE', #41645, 10.50000000000009200 ) ; +#34117 = AXIS2_PLACEMENT_3D ( 'NONE', #39057, #8052, #76340 ) ; +#34118 = ORIENTED_EDGE ( 'NONE', *, *, #72669, .T. ) ; +#34119 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#34120 = CARTESIAN_POINT ( 'NONE', ( 17.05876403037001800, 92.97385436247971300, -28.49144757267211500 ) ) ; +#34121 = ORIENTED_EDGE ( 'NONE', *, *, #37233, .F. ) ; +#34122 = ORIENTED_EDGE ( 'NONE', *, *, #69867, .F. ) ; +#34123 = VERTEX_POINT ( 'NONE', #664 ) ; +#34124 = ORIENTED_EDGE ( 'NONE', *, *, #44511, .F. ) ; +#34125 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 87.70389005397359500, -28.37519436813218800 ) ) ; +#34126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34128 = CONICAL_SURFACE ( 'NONE', #70176, 10.00000000000009200, 0.7853981633974447300 ) ; +#34129 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122139200, 41.02667319908792400, -28.37233769390156000 ) ) ; +#34130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34131 = VERTEX_POINT ( 'NONE', #68947 ) ; +#34132 = AXIS2_PLACEMENT_3D ( 'NONE', #33259, #76762, #39498 ) ; +#34133 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143967700, 55.15853008474736900, -28.52629299565633000 ) ) ; +#34134 = ADVANCED_FACE ( 'NONE', ( #21991 ), #3465, .T. ) ; +#34135 = EDGE_CURVE ( 'NONE', #68330, #58440, #20049, .T. ) ; +#34136 = FACE_OUTER_BOUND ( 'NONE', #66063, .T. ) ; +#34137 = VERTEX_POINT ( 'NONE', #19454 ) ; +#34138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3811, #22595, #41350, #4088 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880081499192800E-007, 0.0003101809493107614200 ), + .UNSPECIFIED. ) ; +#34139 = EDGE_LOOP ( 'NONE', ( #39758, #21233, #58357, #67800, #7941 ) ) ; +#34140 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431400, 49.42298334620763700, -28.20555803802997700 ) ) ; +#34141 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 65.16666666666668600, -3.349151577478988200 ) ) ; +#34142 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#34143 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#34144 = EDGE_CURVE ( 'NONE', #64735, #34172, #57788, .T. ) ; +#34145 = EDGE_CURVE ( 'NONE', #17804, #45092, #43308, .T. ) ; +#34146 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034401200, 17.92298334620717900, -28.20555803803002000 ) ) ; +#34147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34148 = ORIENTED_EDGE ( 'NONE', *, *, #16185, .F. ) ; +#34149 = EDGE_LOOP ( 'NONE', ( #70321, #24514, #52396, #72258 ) ) ; +#34150 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312635900, 65.80000000000507000, -28.70555803803014400 ) ) ; +#34151 = ORIENTED_EDGE ( 'NONE', *, *, #78393, .T. ) ; +#34152 = AXIS2_PLACEMENT_3D ( 'NONE', #60803, #67047, #29825 ) ; +#34153 = EDGE_CURVE ( 'NONE', #25204, #50311, #28919, .T. ) ; +#34154 = EDGE_CURVE ( 'NONE', #36426, #24557, #14402, .T. ) ; +#34155 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686884500, 60.01994747561652600, -28.24986299608878000 ) ) ; +#34156 = EDGE_CURVE ( 'NONE', #80558, #64775, #16045, .T. ) ; +#34157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34158 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252813000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#34159 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 36.50000000000000000, 6.847000845227646500 ) ) ; +#34160 = CIRCLE ( 'NONE', #23699, 9.500000000000097700 ) ; +#34162 = EDGE_LOOP ( 'NONE', ( #74605, #78302, #54222, #52407, #51684 ) ) ; +#34161 = EDGE_CURVE ( 'NONE', #43580, #56906, #80721, .T. ) ; +#34163 = ORIENTED_EDGE ( 'NONE', *, *, #50415, .F. ) ; +#34164 = AXIS2_PLACEMENT_3D ( 'NONE', #78635, #41339, #4082 ) ; +#34165 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528172200, 49.63131911501876200, -28.51286550264510200 ) ) ; +#34166 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 70.34267608797617300, -28.20555803803014400 ) ) ; +#34167 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#34168 = FACE_OUTER_BOUND ( 'NONE', #63850, .T. ) ; +#34169 = EDGE_LOOP ( 'NONE', ( #69980, #30662, #18503 ) ) ; +#34170 = EDGE_LOOP ( 'NONE', ( #19122, #68996, #60699, #40645 ) ) ; +#34171 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 50.90050506338822300, -28.70555803802997700 ) ) ; +#34172 = VERTEX_POINT ( 'NONE', #7721 ) ; +#34173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#34174 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#34175 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#34176 = ORIENTED_EDGE ( 'NONE', *, *, #36186, .F. ) ; +#34177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34178 = AXIS2_PLACEMENT_3D ( 'NONE', #10021, #53534, #16284 ) ; +#34179 = CONICAL_SURFACE ( 'NONE', #42149, 10.50000000000009600, 0.7853981633974500600 ) ; +#34180 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59969, #22691, #41446, #4182 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003690754108544893900, 0.001145887823880366900 ), + .UNSPECIFIED. ) ; +#34181 = ADVANCED_FACE ( 'NONE', ( #5444 ), #18080, .F. ) ; +#34182 = CARTESIAN_POINT ( 'NONE', ( 16.25414891926968900, 94.10829783853937200, -28.38587011735776100 ) ) ; +#34183 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34184 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.93250300240229200, -28.20555803802996700 ) ) ; +#34185 = ORIENTED_EDGE ( 'NONE', *, *, #4628, .T. ) ; +#34186 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#34187 = FACE_OUTER_BOUND ( 'NONE', #23794, .T. ) ; +#34188 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.23796787468685900, -28.38801640354855100 ) ) ; +#34189 = ORIENTED_EDGE ( 'NONE', *, *, #64343, .T. ) ; +#34190 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, -1.166666666666651200, -9.205558038030003900 ) ) ; +#34191 = ORIENTED_EDGE ( 'NONE', *, *, #64321, .F. ) ; +#34192 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#34193 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310632700, 81.49769010897038900, -28.61774594594310300 ) ) ; +#34194 = VERTEX_POINT ( 'NONE', #26530 ) ; +#34195 = EDGE_LOOP ( 'NONE', ( #58588, #16918, #73881, #45285 ) ) ; +#34196 = ORIENTED_EDGE ( 'NONE', *, *, #61285, .T. ) ; +#34197 = ORIENTED_EDGE ( 'NONE', *, *, #75048, .F. ) ; +#34198 = CONICAL_SURFACE ( 'NONE', #6566, 10.00000000000009200, 0.7853981633974447300 ) ; +#34199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34200 = ADVANCED_FACE ( 'NONE', ( #53109 ), #65790, .T. ) ; +#34201 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471413000, 9.968680884981180800, -28.51286550264493200 ) ) ; +#34202 = AXIS2_PLACEMENT_3D ( 'NONE', #13397, #56889, #19631 ) ; +#34203 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 51.25732391202398500, -28.20555803802997700 ) ) ; +#34204 = EDGE_CURVE ( 'NONE', #66821, #23241, #1521, .T. ) ; +#34205 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736729100, 24.54999999999995500, -28.70555803802994200 ) ) ; +#34206 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655685100, 38.92298334620757300, -28.20555803802996000 ) ) ; +#34207 = ORIENTED_EDGE ( 'NONE', *, *, #15936, .F. ) ; +#34208 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#34209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34210 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 38.00972971738994500, -28.70555803802996000 ) ) ; +#34211 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#34212 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34213 = CIRCLE ( 'NONE', #34714, 10.00000000000009400 ) ; +#34215 = VERTEX_POINT ( 'NONE', #20531 ) ; +#34214 = ADVANCED_FACE ( 'NONE', ( #67726 ), #16138, .T. ) ; +#34216 = EDGE_CURVE ( 'NONE', #45183, #30550, #66280, .T. ) ; +#34217 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747181000, 18.13131911501876200, -28.51286550264506300 ) ) ; +#34218 = AXIS2_PLACEMENT_3D ( 'NONE', #78175, #47389, #16430 ) ; +#34219 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#34220 = CARTESIAN_POINT ( 'NONE', ( -3.778746597914906400, 39.16476742015635900, -28.30311934730017100 ) ) ; +#34221 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 64.79999999999975600, -28.70555803803030800 ) ) ; +#34222 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#34223 = ADVANCED_FACE ( 'NONE', ( #49190 ), #45490, .T. ) ; +#34224 = AXIS2_PLACEMENT_3D ( 'NONE', #13309, #56803, #19553 ) ; +#34225 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#34226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34227 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 8.166666666666680300, 9.794441961969994300 ) ) ; +#34228 = VERTEX_POINT ( 'NONE', #58049 ) ; +#34229 = ORIENTED_EDGE ( 'NONE', *, *, #39870, .T. ) ; +#34231 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#34230 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75927, #69669, #57173, #38633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760852496900, 0.0007596411030273872100 ), + .UNSPECIFIED. ) ; +#34232 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34233 = ORIENTED_EDGE ( 'NONE', *, *, #44714, .T. ) ; +#34234 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 42.50000000000002100, -4.865812075874393000 ) ) ; +#34235 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34236 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34237 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 7.500000000000006200, -7.061964498581016200 ) ) ; +#34238 = CONICAL_SURFACE ( 'NONE', #3280, 10.50000000000009600, 0.7853981633974500600 ) ; +#34239 = ORIENTED_EDGE ( 'NONE', *, *, #60316, .T. ) ; +#34240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34241 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35470, #66466, #72727, #78988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207982721300E-007, 0.0008724366121410526700 ), + .UNSPECIFIED. ) ; +#34242 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#34244 = EDGE_CURVE ( 'NONE', #24204, #79096, #32673, .T. ) ; +#34243 = ORIENTED_EDGE ( 'NONE', *, *, #74942, .T. ) ; +#34245 = CARTESIAN_POINT ( 'NONE', ( 5.219792838936894200, 44.45000000000001000, 4.895946922822618700 ) ) ; +#34246 = ORIENTED_EDGE ( 'NONE', *, *, #39517, .T. ) ; +#34247 = FACE_OUTER_BOUND ( 'NONE', #78947, .T. ) ; +#34248 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 44.83333333333333600, 1.741883078712340300 ) ) ; +#34249 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 36.94142842854297000, -28.20555803802995200 ) ) ; +#34250 = ORIENTED_EDGE ( 'NONE', *, *, #27383, .F. ) ; +#34251 = ORIENTED_EDGE ( 'NONE', *, *, #72656, .T. ) ; +#34252 = EDGE_LOOP ( 'NONE', ( #7121, #20211, #56722 ) ) ; +#34253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34255 = ORIENTED_EDGE ( 'NONE', *, *, #7606, .T. ) ; +#34256 = ORIENTED_EDGE ( 'NONE', *, *, #49823, .F. ) ; +#34257 = FACE_OUTER_BOUND ( 'NONE', #35194, .T. ) ; +#34258 = CARTESIAN_POINT ( 'NONE', ( 3.976840323493679600, 10.01912043132454100, -28.30223257055597200 ) ) ; +#34259 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290034300, 18.06267502090464200, -28.41043597897511900 ) ) ; +#34260 = CARTESIAN_POINT ( 'NONE', ( 12.53318012365765500, 75.79999999999950000, -28.37307693585108100 ) ) ; +#34261 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#34262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34263 = ORIENTED_EDGE ( 'NONE', *, *, #80114, .F. ) ; +#34264 = VERTEX_POINT ( 'NONE', #32755 ) ; +#34265 = EDGE_CURVE ( 'NONE', #69501, #50513, #51118, .T. ) ; +#34266 = FACE_OUTER_BOUND ( 'NONE', #39386, .T. ) ; +#34267 = ORIENTED_EDGE ( 'NONE', *, *, #33524, .F. ) ; +#34268 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100560500, 31.47636006919921700, -28.38670679782176600 ) ) ; +#34269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34270 = EDGE_LOOP ( 'NONE', ( #68003, #48035, #56511, #2400 ) ) ; +#34271 = EDGE_CURVE ( 'NONE', #35532, #65591, #51754, .T. ) ; +#34272 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388400, 39.16349705304866500, -28.30782889147481300 ) ) ; +#34273 = VERTEX_POINT ( 'NONE', #64604 ) ; +#34274 = EDGE_LOOP ( 'NONE', ( #39532, #10151, #18194, #54484 ) ) ; +#34275 = ORIENTED_EDGE ( 'NONE', *, *, #48432, .F. ) ; +#34276 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 85.92347538297963200, -28.70555803803014400 ) ) ; +#34277 = CONICAL_SURFACE ( 'NONE', #51212, 10.50000000000009400, 0.7853981633974500600 ) ; +#34278 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743734500, 77.93535825203927900, -28.53896444442206000 ) ) ; +#34279 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999999700, -28.20555803802997700 ) ) ; +#34280 = EDGE_LOOP ( 'NONE', ( #17949, #77987, #20000 ) ) ; +#34281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34282 = FACE_OUTER_BOUND ( 'NONE', #27910, .T. ) ; +#34283 = AXIS2_PLACEMENT_3D ( 'NONE', #54675, #17428, #60950 ) ; +#34284 = EDGE_CURVE ( 'NONE', #46910, #76395, #37306, .T. ) ; +#34285 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507569900, 49.07379779496242400, -28.70555803802996700 ) ) ; +#34286 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58002, #14220, #27013, #70495 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572618868700E-007, 0.0007596410370205536400 ), + .UNSPECIFIED. ) ; +#34287 = EDGE_LOOP ( 'NONE', ( #6686, #11924, #37259, #10848 ) ) ; +#34288 = EDGE_CURVE ( 'NONE', #77231, #29475, #22890, .T. ) ; +#34289 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#34290 = AXIS2_PLACEMENT_3D ( 'NONE', #44412, #7179, #50688 ) ; +#34291 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 48.33333333333334300, 2.794441961969998300 ) ) ; +#34292 = CARTESIAN_POINT ( 'NONE', ( 4.350148153012866100E-014, 73.20037755566824000, -28.53664883431611800 ) ) ; +#34293 = CONICAL_SURFACE ( 'NONE', #74284, 10.50000000000009600, 0.7853981633974500600 ) ; +#34294 = ORIENTED_EDGE ( 'NONE', *, *, #70011, .T. ) ; +#34295 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67520, #48982, #24277, #67795 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185241100, 0.001517199873936355200 ), + .UNSPECIFIED. ) ; +#34297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8317, #14608, #70617, #33362, #76884, #39615, #2329, #45836 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.001719839228549898500, 0.002579758842824847800, 0.003439678457099797100 ), + .UNSPECIFIED. ) ; +#34298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34299 = ADVANCED_FACE ( 'NONE', ( #71631 ), #78434, .F. ) ; +#34300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34301 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 59.63176086632794400, -28.70555803802997700 ) ) ; +#34302 = AXIS2_PLACEMENT_3D ( 'NONE', #26089, #7539, #13842 ) ; +#34303 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540328400, 62.51973550835654700, -28.70555803803005900 ) ) ; +#34304 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34306 = EDGE_CURVE ( 'NONE', #2685, #19205, #8377, .T. ) ; +#34307 = EDGE_CURVE ( 'NONE', #19455, #6864, #38484, .T. ) ; +#34308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27327, #8506, #39801, #2516 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170519736400, 0.004414519045339631800 ), + .UNSPECIFIED. ) ; +#34309 = AXIS2_PLACEMENT_3D ( 'NONE', #49863, #6384, #37358 ) ; +#34310 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754100, 32.09027028261002100, -28.70555803802996000 ) ) ; +#34311 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 50.66666666666667900, -8.133761268305512700 ) ) ; +#34312 = ADVANCED_FACE ( 'NONE', ( #63836 ), #61887, .T. ) ; +#34313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34314 = VERTEX_POINT ( 'NONE', #71372 ) ; +#34315 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34316 = ORIENTED_EDGE ( 'NONE', *, *, #38744, .T. ) ; +#34317 = ADVANCED_FACE ( 'NONE', ( #14190 ), #76450, .T. ) ; +#34318 = EDGE_CURVE ( 'NONE', #66098, #53468, #74738, .T. ) ; +#34319 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 13.50000000000000400, -7.061964498581022400 ) ) ; +#34320 = CARTESIAN_POINT ( 'NONE', ( 20.14439310546382300, 94.17219629628003500, -27.28082673717237600 ) ) ; +#34321 = AXIS2_PLACEMENT_3D ( 'NONE', #67534, #17772, #36498 ) ; +#34322 = AXIS2_PLACEMENT_3D ( 'NONE', #52364, #64946, #21416 ) ; +#34323 = CARTESIAN_POINT ( 'NONE', ( -3.628581783286365600, 80.16749699759769500, -28.25056166218020700 ) ) ; +#34324 = ORIENTED_EDGE ( 'NONE', *, *, #57267, .T. ) ; +#34325 = ADVANCED_FACE ( 'NONE', ( #30743 ), #43347, .F. ) ; +#34326 = CIRCLE ( 'NONE', #76204, 10.50000000000009600 ) ; +#34327 = VERTEX_POINT ( 'NONE', #34377 ) ; +#34328 = CONICAL_SURFACE ( 'NONE', #42516, 10.00000000000009400, 0.7853981633974447300 ) ; +#34329 = ORIENTED_EDGE ( 'NONE', *, *, #39025, .T. ) ; +#34330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34331 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 9.932503002402294000, -28.20555803802994200 ) ) ; +#34332 = CIRCLE ( 'NONE', #45982, 10.00000000000009200 ) ; +#34333 = ORIENTED_EDGE ( 'NONE', *, *, #31663, .F. ) ; +#34334 = CARTESIAN_POINT ( 'NONE', ( 17.40093558791434700, 81.69271233864083100, -28.41359472476252200 ) ) ; +#34335 = EDGE_LOOP ( 'NONE', ( #19380, #71656, #6322, #52563 ) ) ; +#34336 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 16.83333333333333600, 3.794441961969996900 ) ) ; +#34337 = ORIENTED_EDGE ( 'NONE', *, *, #12705, .F. ) ; +#34338 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428227000, 71.52858243452108400, -28.70555803803014400 ) ) ; +#34339 = CIRCLE ( 'NONE', #37376, 10.00000000000009200 ) ; +#34340 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10811, #23059, #35575, #54315 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402313400 ), + .UNSPECIFIED. ) ; +#34341 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34343 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 57.00000000000000700, 6.794441961969995200 ) ) ; +#34344 = ORIENTED_EDGE ( 'NONE', *, *, #39035, .T. ) ; +#34345 = AXIS2_PLACEMENT_3D ( 'NONE', #39241, #1979, #45467 ) ; +#34346 = CIRCLE ( 'NONE', #34781, 10.50000000000009600 ) ; +#34347 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34348 = EDGE_LOOP ( 'NONE', ( #20249, #69508, #26649, #27250 ) ) ; +#34349 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#34350 = ORIENTED_EDGE ( 'NONE', *, *, #35846, .T. ) ; +#34351 = ORIENTED_EDGE ( 'NONE', *, *, #13316, .T. ) ; +#34352 = CONICAL_SURFACE ( 'NONE', #55902, 10.50000000000009800, 0.7853981633974518300 ) ; +#34353 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576909000, 14.04999999999975700, -28.65220501466660300 ) ) ; +#34354 = ORIENTED_EDGE ( 'NONE', *, *, #38652, .T. ) ; +#34355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34356 = CONICAL_SURFACE ( 'NONE', #50737, 10.50000000000009600, 0.7853981633974500600 ) ; +#34357 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877843500, 41.02667319908789500, -28.37233769390157100 ) ) ; +#34358 = AXIS2_PLACEMENT_3D ( 'NONE', #34754, #78262, #40996 ) ; +#34359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34360 = EDGE_CURVE ( 'NONE', #25412, #77114, #60299, .T. ) ; +#34361 = EDGE_LOOP ( 'NONE', ( #41392, #12748, #13361, #49133 ) ) ; +#34362 = CARTESIAN_POINT ( 'NONE', ( -3.535187653982936800, 9.406791769321969800, -28.68794773163825000 ) ) ; +#34363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34364 = AXIS2_PLACEMENT_3D ( 'NONE', #29271, #72745, #35486 ) ; +#34365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34366 = CIRCLE ( 'NONE', #14805, 10.50000000000009600 ) ; +#34367 = EDGE_LOOP ( 'NONE', ( #29524, #34176, #36072, #26115 ) ) ; +#34368 = CONICAL_SURFACE ( 'NONE', #10726, 10.50000000000009600, 0.7853981633974518300 ) ; +#34369 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#34370 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653757400, 51.39409401757628600, -28.39369363572365000 ) ) ; +#34371 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#34372 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34373 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#34374 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34375 = CARTESIAN_POINT ( 'NONE', ( 3.031778038947877500, 70.28233213024643100, -28.25051428653851500 ) ) ; +#34376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34377 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894335400, 24.55000000000001500, -28.70555803802994200 ) ) ; +#34378 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310460400, 28.60230989102909800, -28.61774594594333000 ) ) ; +#34379 = CARTESIAN_POINT ( 'NONE', ( 17.14620600645632800, 62.51871030405743600, -28.47270666107741000 ) ) ; +#34380 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34381 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#34382 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#34383 = EDGE_CURVE ( 'NONE', #52833, #56019, #45772, .T. ) ; +#34384 = CARTESIAN_POINT ( 'NONE', ( -9.651444164861413100, 8.144909198925859100, -28.55411387316860300 ) ) ; +#34385 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274707400, 35.05000000000000400, -28.20555803802995200 ) ) ; +#34386 = EDGE_CURVE ( 'NONE', #24421, #42094, #31368, .T. ) ; +#34387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34388 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390709100, 71.46283204837338600, -28.48697406221672800 ) ) ; +#34389 = ORIENTED_EDGE ( 'NONE', *, *, #4358, .F. ) ; +#34390 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.54999999999999700, -28.20555803802994200 ) ) ; +#34391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34392 = CARTESIAN_POINT ( 'NONE', ( 17.07349692871609600, 61.37839075872547300, -28.29547734244375700 ) ) ; +#34393 = CARTESIAN_POINT ( 'NONE', ( 8.116254736416763600, 45.54999999999998300, -28.53994725305377100 ) ) ; +#34394 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.47246552159110400, -28.38801640354855800 ) ) ; +#34395 = EDGE_CURVE ( 'NONE', #44986, #5229, #16903, .T. ) ; +#34396 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#34397 = VERTEX_POINT ( 'NONE', #47117 ) ; +#34398 = EDGE_CURVE ( 'NONE', #49135, #56941, #47236, .T. ) ; +#34399 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14888, #46127, #64963, #27686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555486613300E-007, 0.0009605145132142475600 ), + .UNSPECIFIED. ) ; +#34400 = CONICAL_SURFACE ( 'NONE', #39134, 10.00000000000009400, 0.7853981633974447300 ) ; +#34401 = VERTEX_POINT ( 'NONE', #72193 ) ; +#34402 = AXIS2_PLACEMENT_3D ( 'NONE', #66077, #28847, #72338 ) ; +#34403 = CONICAL_SURFACE ( 'NONE', #26363, 10.00000000000009600, 0.7853981633974447300 ) ; +#34404 = ORIENTED_EDGE ( 'NONE', *, *, #18887, .F. ) ; +#34405 = VERTEX_POINT ( 'NONE', #65936 ) ; +#34406 = FACE_OUTER_BOUND ( 'NONE', #76364, .T. ) ; +#34407 = ORIENTED_EDGE ( 'NONE', *, *, #20579, .F. ) ; +#34408 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274709400, 45.54999999999999700, -28.20555803802996700 ) ) ; +#34409 = ORIENTED_EDGE ( 'NONE', *, *, #31884, .F. ) ; +#34410 = ADVANCED_FACE ( 'NONE', ( #12243 ), #74522, .F. ) ; +#34411 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 63.00000000000000000, -1.205558038030005300 ) ) ; +#34412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18728, #24988, #222, #43709 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721068014400E-007, 0.001076779618376944000 ), + .UNSPECIFIED. ) ; +#34413 = EDGE_CURVE ( 'NONE', #32933, #25226, #10286, .T. ) ; +#34414 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#34415 = EDGE_CURVE ( 'NONE', #68977, #18101, #2407, .T. ) ; +#34416 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#34417 = EDGE_CURVE ( 'NONE', #23125, #1543, #68744, .T. ) ; +#34418 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34419 = ADVANCED_FACE ( 'NONE', ( #45270 ), #24878, .T. ) ; +#34420 = CIRCLE ( 'NONE', #24303, 10.00000000000009200 ) ; +#34421 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#34422 = VERTEX_POINT ( 'NONE', #35467 ) ; +#34423 = CIRCLE ( 'NONE', #31092, 10.00000000000009200 ) ; +#34424 = AXIS2_PLACEMENT_3D ( 'NONE', #13660, #57160, #19905 ) ; +#34425 = ORIENTED_EDGE ( 'NONE', *, *, #713, .T. ) ; +#34426 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34429 = ORIENTED_EDGE ( 'NONE', *, *, #53339, .F. ) ; +#34428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47208, #66028, #10263, #53765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061278700E-007, 0.001119323292485661300 ), + .UNSPECIFIED. ) ; +#34430 = EDGE_LOOP ( 'NONE', ( #49889, #59416, #32103, #67823 ) ) ; +#34431 = AXIS2_PLACEMENT_3D ( 'NONE', #40531, #3258, #46763 ) ; +#34432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34433 = ORIENTED_EDGE ( 'NONE', *, *, #8987, .F. ) ; +#34434 = EDGE_CURVE ( 'NONE', #37185, #62129, #54270, .T. ) ; +#34435 = FACE_OUTER_BOUND ( 'NONE', #69668, .T. ) ; +#34436 = AXIS2_PLACEMENT_3D ( 'NONE', #15570, #9563, #77847 ) ; +#34437 = AXIS2_PLACEMENT_3D ( 'NONE', #11235, #54724, #17485 ) ; +#34438 = VERTEX_POINT ( 'NONE', #41680 ) ; +#34439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34440 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15830, #9561, #53073, #59352 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710731200, 0.0008082646680357285700 ), + .UNSPECIFIED. ) ; +#34441 = ADVANCED_FACE ( 'NONE', ( #26833 ), #72585, .T. ) ; +#34442 = CARTESIAN_POINT ( 'NONE', ( 17.24640981996099500, 8.531987225494672700, -28.44963959303929400 ) ) ; +#34443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34444 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999930700, 87.70389005397375100, -28.37519436813202500 ) ) ; +#34445 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 34.33333333333334300, -6.705558038030005700 ) ) ; +#34446 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34447 = ORIENTED_EDGE ( 'NONE', *, *, #9251, .F. ) ; +#34448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34449 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 9.746602415621548900, -28.20555803803025800 ) ) ; +#34450 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#34451 = EDGE_LOOP ( 'NONE', ( #4041, #29196, #63838, #45606, #21623 ) ) ; +#34452 = CIRCLE ( 'NONE', #44490, 10.00000000000009600 ) ; +#34453 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048100, 70.69949493661160000, -28.70555803803030800 ) ) ; +#34454 = CARTESIAN_POINT ( 'NONE', ( -4.801413064971206300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#34455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34458 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873543400, 43.17955320215948900, -28.64059091698901900 ) ) ; +#34459 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655937800, 17.92298334620740300, -28.20555803802993500 ) ) ; +#34460 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34461 = AXIS2_PLACEMENT_3D ( 'NONE', #67862, #24086, #11841 ) ; +#34462 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#34463 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.73237991241951100, -28.26633708900882500 ) ) ; +#34464 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, -3.333333333333326800, 5.722645192245505700 ) ) ; +#34465 = FACE_OUTER_BOUND ( 'NONE', #58141, .T. ) ; +#34466 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252815100, 20.46868088498121800, -28.51286550264510200 ) ) ; +#34467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34468 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 19.90050506338822300, -28.70555803802995200 ) ) ; +#34469 = ORIENTED_EDGE ( 'NONE', *, *, #55916, .T. ) ; +#34470 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 90.07141756547892400, -28.70555803802997700 ) ) ; +#34471 = CARTESIAN_POINT ( 'NONE', ( 3.976832725519294300, 39.08088969930761900, -28.30223898143235700 ) ) ; +#34472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34473 = AXIS2_PLACEMENT_3D ( 'NONE', #15317, #58817, #21589 ) ; +#34474 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474191200, 31.36172549728279800, -28.47230003642276600 ) ) ; +#34475 = EDGE_LOOP ( 'NONE', ( #67651, #22811, #62127 ) ) ; +#34476 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24449, #61722, #74236, #36933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656155263100, 0.001302223101366053900 ), + .UNSPECIFIED. ) ; +#34477 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195931300, 73.65857157145700300, -28.37229765499282100 ) ) ; +#34478 = VERTEX_POINT ( 'NONE', #35718 ) ; +#34479 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489639300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#34480 = EDGE_CURVE ( 'NONE', #79585, #66489, #80363, .T. ) ; +#34481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34482 = CIRCLE ( 'NONE', #64692, 10.00000000000009200 ) ; +#34483 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#34484 = ORIENTED_EDGE ( 'NONE', *, *, #51854, .F. ) ; +#34485 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544432100, 51.87833896172670500, -28.53892303408230500 ) ) ; +#34486 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, 70.03751622186510400, -28.32723995587630500 ) ) ; +#34487 = CIRCLE ( 'NONE', #30998, 10.00000000000009400 ) ; +#34488 = AXIS2_PLACEMENT_3D ( 'NONE', #46948, #9718, #53229 ) ; +#34489 = ORIENTED_EDGE ( 'NONE', *, *, #17706, .F. ) ; +#34490 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#34491 = CIRCLE ( 'NONE', #52674, 10.50000000000009600 ) ; +#34492 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34493 = FACE_OUTER_BOUND ( 'NONE', #43829, .T. ) ; +#34494 = ORIENTED_EDGE ( 'NONE', *, *, #33200, .T. ) ; +#34495 = ORIENTED_EDGE ( 'NONE', *, *, #22611, .T. ) ; +#34496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34497 = ORIENTED_EDGE ( 'NONE', *, *, #33498, .T. ) ; +#34498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34499 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34500 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34501 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627475100, 87.93535825203916500, -28.53896444442250400 ) ) ; +#34502 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#34503 = ADVANCED_FACE ( 'NONE', ( #28830 ), #22927, .F. ) ; +#34504 = FACE_OUTER_BOUND ( 'NONE', #11212, .T. ) ; +#34505 = ORIENTED_EDGE ( 'NONE', *, *, #24414, .T. ) ; +#34506 = FACE_OUTER_BOUND ( 'NONE', #20485, .T. ) ; +#34507 = EDGE_CURVE ( 'NONE', #68070, #38367, #39455, .T. ) ; +#34508 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#34509 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ; +#34510 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034406200, 28.42298334620740300, -28.20555803802994500 ) ) ; +#34511 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000063900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#34512 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 6.000000000000004400, -12.20555803803000200 ) ) ; +#34513 = ORIENTED_EDGE ( 'NONE', *, *, #75266, .T. ) ; +#34515 = EDGE_CURVE ( 'NONE', #27898, #65179, #56001, .T. ) ; +#34514 = ORIENTED_EDGE ( 'NONE', *, *, #28802, .F. ) ; +#34516 = ORIENTED_EDGE ( 'NONE', *, *, #31082, .T. ) ; +#34517 = ORIENTED_EDGE ( 'NONE', *, *, #67402, .F. ) ; +#34518 = ADVANCED_FACE ( 'NONE', ( #8295 ), #37484, .F. ) ; +#34519 = CONICAL_SURFACE ( 'NONE', #64279, 10.50000000000009600, 0.7853981633974500600 ) ; +#34520 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 40.33333333333334300, 3.124568980892187500 ) ) ; +#34521 = ORIENTED_EDGE ( 'NONE', *, *, #28039, .T. ) ; +#34522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34523 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15085, #52303, #33853, #77370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278509800, 0.0005468822770170140900 ), + .UNSPECIFIED. ) ; +#34524 = EDGE_CURVE ( 'NONE', #33477, #73096, #54051, .T. ) ; +#34525 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 5.333333333333342800, 5.722645192245503900 ) ) ; +#34526 = EDGE_CURVE ( 'NONE', #42850, #8208, #39821, .T. ) ; +#34527 = ORIENTED_EDGE ( 'NONE', *, *, #43750, .T. ) ; +#34528 = ORIENTED_EDGE ( 'NONE', *, *, #23084, .F. ) ; +#34529 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34531 = EDGE_CURVE ( 'NONE', #79804, #7367, #25389, .T. ) ; +#34532 = ORIENTED_EDGE ( 'NONE', *, *, #63641, .F. ) ; +#34533 = CARTESIAN_POINT ( 'NONE', ( 6.056155057929117000, 44.44999999999999600, 4.659070067903749100 ) ) ; +#34534 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655644300, 41.67701665379239300, -28.20555803802997400 ) ) ; +#34535 = CIRCLE ( 'NONE', #74240, 10.50000000000009600 ) ; +#34536 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 42.66666666666667900, -6.705558038030000400 ) ) ; +#34537 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75220, #56447, #683, #44157 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.096666480321159400E-016, 0.001179148174662775000 ), + .UNSPECIFIED. ) ; +#34538 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533250800, 38.80869142985022800, -28.37223374938531600 ) ) ; +#34539 = AXIS2_PLACEMENT_3D ( 'NONE', #36174, #73977, #36694 ) ; +#34540 = EDGE_CURVE ( 'NONE', #25145, #47514, #10910, .T. ) ; +#34541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34542 = EDGE_CURVE ( 'NONE', #66366, #68448, #59936, .T. ) ; +#34543 = EDGE_CURVE ( 'NONE', #23362, #36688, #77218, .T. ) ; +#34544 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#34545 = ADVANCED_FACE ( 'NONE', ( #70593 ), #52069, .F. ) ; +#34546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34547 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34548 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34549 = AXIS2_PLACEMENT_3D ( 'NONE', #21632, #65154, #27904 ) ; +#34550 = FACE_OUTER_BOUND ( 'NONE', #71558, .T. ) ; +#34551 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571919100, 70.07141756547886800, -28.70555803803014400 ) ) ; +#34552 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34556 = ORIENTED_EDGE ( 'NONE', *, *, #19378, .F. ) ; +#34555 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#34557 = FACE_OUTER_BOUND ( 'NONE', #59994, .T. ) ; +#34558 = AXIS2_PLACEMENT_3D ( 'NONE', #18164, #61711, #24437 ) ; +#34559 = AXIS2_PLACEMENT_3D ( 'NONE', #74875, #43822, #31366 ) ; +#34560 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 87.92318720225496500, -28.70555803802997700 ) ) ; +#34561 = EDGE_LOOP ( 'NONE', ( #62686, #59077, #53902 ) ) ; +#34562 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 89.77559325427182600, -28.45987523529581900 ) ) ; +#34563 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34565 = CIRCLE ( 'NONE', #17736, 9.500000000000095900 ) ; +#34566 = FACE_OUTER_BOUND ( 'NONE', #64541, .T. ) ; +#34567 = ORIENTED_EDGE ( 'NONE', *, *, #72638, .F. ) ; +#34568 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.16666666666668600, -3.349151577478988200 ) ) ; +#34569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34570 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34571 = ORIENTED_EDGE ( 'NONE', *, *, #12837, .T. ) ; +#34572 = CONICAL_SURFACE ( 'NONE', #44775, 10.50000000000009800, 0.7853981633974518300 ) ; +#34573 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#34574 = EDGE_LOOP ( 'NONE', ( #10059, #50196, #76240 ) ) ; +#34575 = VERTEX_POINT ( 'NONE', #18289 ) ; +#34576 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 59.91070809551060700, -28.20555803802997700 ) ) ; +#34577 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811641900, 30.89435118792235400, -28.41114655922301700 ) ) ; +#34578 = AXIS2_PLACEMENT_3D ( 'NONE', #31280, #74794, #37489 ) ; +#34579 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.16749699759768800, -28.20555803802997700 ) ) ; +#34580 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 80.07141756547893900, -28.70555803802997700 ) ) ; +#34581 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73877, #80113, #55338, #18095 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849952700, 0.007639752840043633300 ), + .UNSPECIFIED. ) ; +#34582 = CYLINDRICAL_SURFACE ( 'NONE', #54424, 10.00000000000000200 ) ; +#34583 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 89.94924284854654700, -28.20555803803014400 ) ) ; +#34584 = ORIENTED_EDGE ( 'NONE', *, *, #75505, .F. ) ; +#34585 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34586 = CIRCLE ( 'NONE', #44478, 10.00000000000009200 ) ; +#34587 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 52.83333333333334300, 6.794441961969994300 ) ) ; +#34588 = EDGE_LOOP ( 'NONE', ( #33239, #78572, #56640 ) ) ; +#34589 = EDGE_CURVE ( 'NONE', #79578, #61724, #62782, .T. ) ; +#34590 = ORIENTED_EDGE ( 'NONE', *, *, #37123, .F. ) ; +#34591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34592 = AXIS2_PLACEMENT_3D ( 'NONE', #32090, #19853, #69335 ) ; +#34593 = ORIENTED_EDGE ( 'NONE', *, *, #29683, .F. ) ; +#34594 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583923400, 39.58874248361071600, -28.53740755999535500 ) ) ; +#34595 = ORIENTED_EDGE ( 'NONE', *, *, #49353, .F. ) ; +#34596 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34597 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 11.33333333333334800, 2.794441961969998300 ) ) ; +#34598 = CARTESIAN_POINT ( 'NONE', ( 22.76860289943864800, 95.48430141742245800, -25.00231612941065500 ) ) ; +#34599 = CIRCLE ( 'NONE', #76601, 10.50000000000009600 ) ; +#34600 = ORIENTED_EDGE ( 'NONE', *, *, #62778, .T. ) ; +#34601 = ORIENTED_EDGE ( 'NONE', *, *, #5062, .T. ) ; +#34602 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34603 = ADVANCED_FACE ( 'NONE', ( #4418 ), #19004, .T. ) ; +#34604 = VERTEX_POINT ( 'NONE', #80569 ) ; +#34605 = VERTEX_POINT ( 'NONE', #43279 ) ; +#34606 = CIRCLE ( 'NONE', #74354, 10.00000000000009400 ) ; +#34607 = AXIS2_PLACEMENT_3D ( 'NONE', #5236, #79770, #48720 ) ; +#34608 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386300, 49.66349705304866500, -28.30782889147481600 ) ) ; +#34609 = ORIENTED_EDGE ( 'NONE', *, *, #35232, .F. ) ; +#34610 = CIRCLE ( 'NONE', #53835, 10.50000000000009600 ) ; +#34611 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70821, #64349, #21085, #33571 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674238320847600E-007, 0.0007606607323829793700 ), + .UNSPECIFIED. ) ; +#34612 = CARTESIAN_POINT ( 'NONE', ( 17.30192380577525700, 81.75831290081718800, -28.43753768099859900 ) ) ; +#34613 = ADVANCED_FACE ( 'NONE', ( #41408 ), #66718, .T. ) ; +#34614 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 14.66666666666668000, -5.535685056952199400 ) ) ; +#34615 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 80.16749699759769500, -28.20555803802997700 ) ) ; +#34616 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#34617 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 54.83333333333332100, -9.205558038030003900 ) ) ; +#34618 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567151000, 39.35339758437810800, -28.20555803802995200 ) ) ; +#34619 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34620 = EDGE_CURVE ( 'NONE', #24516, #70202, #2449, .T. ) ; +#34621 = FACE_OUTER_BOUND ( 'NONE', #15040, .T. ) ; +#34622 = ADVANCED_FACE ( 'NONE', ( #35584 ), #55802, .T. ) ; +#34623 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878500, 49.66749699759768100, -28.23966044827354300 ) ) ; +#34624 = EDGE_CURVE ( 'NONE', #45798, #33956, #57964, .T. ) ; +#34625 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27877, #34106, #9326, #52849 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005926491507000E-007, 0.0004431156063178025000 ), + .UNSPECIFIED. ) ; +#34626 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762400, 21.02620220503713400, -28.70555803802994200 ) ) ; +#34627 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484832000, 80.22161678501177600, -28.29547179040455900 ) ) ; +#34628 = ORIENTED_EDGE ( 'NONE', *, *, #54152, .T. ) ; +#34629 = ORIENTED_EDGE ( 'NONE', *, *, #36772, .T. ) ; +#34630 = CONICAL_SURFACE ( 'NONE', #69724, 10.50000000000009600, 0.7853981633974500600 ) ; +#34631 = EDGE_CURVE ( 'NONE', #33956, #893, #20995, .T. ) ; +#34632 = ORIENTED_EDGE ( 'NONE', *, *, #59165, .T. ) ; +#34633 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34634 = ADVANCED_FACE ( 'NONE', ( #6370 ), #48171, .F. ) ; +#34635 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#34636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34638 = CIRCLE ( 'NONE', #73979, 10.00000000000009400 ) ; +#34639 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528131800, 30.96868088498121800, -28.51286550264512000 ) ) ; +#34640 = FACE_OUTER_BOUND ( 'NONE', #24592, .T. ) ; +#34641 = EDGE_CURVE ( 'NONE', #71559, #6558, #48259, .T. ) ; +#34642 = VERTEX_POINT ( 'NONE', #37549 ) ; +#34643 = EDGE_CURVE ( 'NONE', #35373, #52754, #33845, .T. ) ; +#34644 = VECTOR ( 'NONE', #14543, 1000.000000000000000 ) ; +#34645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34646 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34647 = ORIENTED_EDGE ( 'NONE', *, *, #52837, .F. ) ; +#34648 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#34649 = CARTESIAN_POINT ( 'NONE', ( -17.04027359854958200, 18.22437813624630100, -28.30310527599297600 ) ) ; +#34650 = ORIENTED_EDGE ( 'NONE', *, *, #22863, .T. ) ; +#34651 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056672700, 24.54999999999998600, -28.70555803802994200 ) ) ; +#34652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34653 = AXIS2_PLACEMENT_3D ( 'NONE', #46734, #9488, #53001 ) ; +#34654 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34655 = EDGE_CURVE ( 'NONE', #78459, #65127, #19376, .T. ) ; +#34656 = EDGE_CURVE ( 'NONE', #146, #67675, #4911, .T. ) ; +#34657 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34658 = EDGE_CURVE ( 'NONE', #46133, #30658, #71229, .T. ) ; +#34659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42475, #17492, #48723, #11510 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782419900, 0.0004366687057309875700 ), + .UNSPECIFIED. ) ; +#34660 = FACE_OUTER_BOUND ( 'NONE', #4902, .T. ) ; +#34661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34662 = CONICAL_SURFACE ( 'NONE', #21573, 10.50000000000009800, 0.7853981633974500600 ) ; +#34663 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#34664 = CARTESIAN_POINT ( 'NONE', ( -24.85169778502906400, 97.84910109025646800, -20.47801750490137000 ) ) ; +#34665 = VERTEX_POINT ( 'NONE', #56884 ) ; +#34666 = AXIS2_PLACEMENT_3D ( 'NONE', #48761, #55039, #5270 ) ; +#34667 = ORIENTED_EDGE ( 'NONE', *, *, #19322, .T. ) ; +#34668 = VERTEX_POINT ( 'NONE', #63161 ) ; +#34669 = ORIENTED_EDGE ( 'NONE', *, *, #3134, .F. ) ; +#34670 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#34671 = CONICAL_SURFACE ( 'NONE', #49514, 10.00000000000009200, 0.7853981633974447300 ) ; +#34672 = FACE_OUTER_BOUND ( 'NONE', #13727, .T. ) ; +#34673 = AXIS2_PLACEMENT_3D ( 'NONE', #27303, #51979, #8482 ) ; +#34674 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#34675 = AXIS2_PLACEMENT_3D ( 'NONE', #56008, #6249, #25025 ) ; +#34676 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 51.25732391202386400, -28.20555803803014400 ) ) ; +#34677 = EDGE_LOOP ( 'NONE', ( #22711, #14613, #35802, #50683, #74374, #69238 ) ) ; +#34678 = AXIS2_PLACEMENT_3D ( 'NONE', #1118, #44604, #7375 ) ; +#34679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34680 = CIRCLE ( 'NONE', #20609, 9.500000000000099500 ) ; +#34681 = ORIENTED_EDGE ( 'NONE', *, *, #1298, .F. ) ; +#34682 = EDGE_LOOP ( 'NONE', ( #30721, #24880, #29712 ) ) ; +#34683 = CONICAL_SURFACE ( 'NONE', #16804, 10.50000000000009600, 0.7853981633974500600 ) ; +#34684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34685 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 60.83333333333332900, 0.9380355014189731800 ) ) ; +#34686 = AXIS2_PLACEMENT_3D ( 'NONE', #61403, #24119, #67624 ) ; +#34687 = EDGE_CURVE ( 'NONE', #17159, #45917, #56761, .T. ) ; +#34688 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939082500, 23.91466791010185500, -28.53910738522646500 ) ) ; +#34689 = ORIENTED_EDGE ( 'NONE', *, *, #37354, .T. ) ; +#34690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#34691 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34692 = CIRCLE ( 'NONE', #59479, 10.50000000000009600 ) ; +#34693 = ORIENTED_EDGE ( 'NONE', *, *, #79810, .T. ) ; +#34694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34695 = EDGE_CURVE ( 'NONE', #33868, #64739, #503, .T. ) ; +#34696 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999998200, 55.00000000000002100, -1.205558038030006400 ) ) ; +#34697 = FACE_OUTER_BOUND ( 'NONE', #54421, .T. ) ; +#34698 = AXIS2_PLACEMENT_3D ( 'NONE', #42230, #11275, #48215 ) ; +#34699 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40821, #65869, #3822, #47311 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647935184600E-007, 0.0007596411030280903200 ), + .UNSPECIFIED. ) ; +#34700 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034401200, 17.92298334620717900, -28.20555803803002000 ) ) ; +#34701 = ORIENTED_EDGE ( 'NONE', *, *, #60510, .F. ) ; +#34702 = ORIENTED_EDGE ( 'NONE', *, *, #8147, .T. ) ; +#34703 = CIRCLE ( 'NONE', #22805, 10.00000000000009200 ) ; +#34704 = ADVANCED_FACE ( 'NONE', ( #64790 ), #79365, .F. ) ; +#34705 = ORIENTED_EDGE ( 'NONE', *, *, #47832, .F. ) ; +#34706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34707 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 71.46283204837337200, -28.48697406221667400 ) ) ; +#34708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34709 = CARTESIAN_POINT ( 'NONE', ( -10.07349184251535600, 80.22161678501183200, -28.29547179040443400 ) ) ; +#34710 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34711 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 32.16666666666667900, 1.741883078712356500 ) ) ; +#34712 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#34713 = FACE_OUTER_BOUND ( 'NONE', #26360, .T. ) ; +#34714 = AXIS2_PLACEMENT_3D ( 'NONE', #26774, #70260, #33010 ) ; +#34715 = CIRCLE ( 'NONE', #67328, 10.00000000000009200 ) ; +#34716 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34717 = EDGE_LOOP ( 'NONE', ( #8727, #13425, #59473 ) ) ; +#34718 = CARTESIAN_POINT ( 'NONE', ( 17.40084336938093300, 69.90722698763534000, -28.41361853548548000 ) ) ; +#34719 = ADVANCED_FACE ( 'NONE', ( #17085 ), #46224, .T. ) ; +#34720 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 51.22294471194859300, -28.20555803803047800 ) ) ; +#34721 = PLANE ( 'NONE', #56843 ) ; +#34722 = ORIENTED_EDGE ( 'NONE', *, *, #77651, .T. ) ; +#34723 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.52242369685794200, -28.53861367218591000 ) ) ; +#34724 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34725 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 57.94142842854297700, -28.20555803802997700 ) ) ; +#34726 = ADVANCED_FACE ( 'NONE', ( #31670 ), #13187, .T. ) ; +#34727 = ORIENTED_EDGE ( 'NONE', *, *, #3394, .F. ) ; +#34728 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813700, 79.60439022488340300, -28.70555803802997700 ) ) ; +#34729 = AXIS2_PLACEMENT_3D ( 'NONE', #23786, #30069, #17538 ) ; +#34730 = ADVANCED_FACE ( 'NONE', ( #33610 ), #60879, .F. ) ; +#34731 = PLANE ( 'NONE', #8653 ) ; +#34732 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458373000, 18.58874248361023300, -28.53740755999557900 ) ) ; +#34733 = CIRCLE ( 'NONE', #38669, 9.500000000000099500 ) ; +#34734 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#34735 = ORIENTED_EDGE ( 'NONE', *, *, #45777, .F. ) ; +#34736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34737 = EDGE_CURVE ( 'NONE', #35530, #31582, #77395, .T. ) ; +#34738 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 66.66666666666664300, -5.535685056952199400 ) ) ; +#34739 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#34740 = EDGE_LOOP ( 'NONE', ( #78051, #37463, #900, #59417 ) ) ; +#34741 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 90.07141756547892400, -28.70555803802997700 ) ) ; +#34742 = CARTESIAN_POINT ( 'NONE', ( -8.783306465195842300, 70.79999999999998300, -28.32841359973437500 ) ) ; +#34743 = EDGE_LOOP ( 'NONE', ( #55840, #75252, #14458, #52432 ) ) ; +#34744 = ORIENTED_EDGE ( 'NONE', *, *, #36953, .T. ) ; +#34745 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#34746 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.22294471194861400, -28.20555803802997700 ) ) ; +#34747 = CONICAL_SURFACE ( 'NONE', #16682, 10.50000000000009800, 0.7853981633974518300 ) ; +#34748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34749 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#34750 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#34751 = ORIENTED_EDGE ( 'NONE', *, *, #60888, .T. ) ; +#34752 = PLANE ( 'NONE', #45131 ) ; +#34753 = VERTEX_POINT ( 'NONE', #20170 ) ; +#34754 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#34755 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22523, #78571, #16534, #60072 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728439183647200E-007, 0.0007763347809200604400 ), + .UNSPECIFIED. ) ; +#34756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34758 = FACE_OUTER_BOUND ( 'NONE', #61294, .T. ) ; +#34759 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#34760 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 10.12753447840916400, -28.38801640354880000 ) ) ; +#34761 = EDGE_CURVE ( 'NONE', #57912, #13206, #42284, .T. ) ; +#34762 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670954700, 27.94136558227939600, -28.48677465922826700 ) ) ; +#34763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39964, #8917, #52440, #15211 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646314600, 0.0009605145132141894500 ), + .UNSPECIFIED. ) ; +#34764 = EDGE_LOOP ( 'NONE', ( #24607, #55409, #66069, #46085, #38001 ) ) ; +#34765 = CIRCLE ( 'NONE', #79821, 9.500000000000097700 ) ; +#34766 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 36.94142842854304100, -28.20555803802995200 ) ) ; +#34767 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25408, #62647, #13168, #56636 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723664900, 0.0008252574424211169200 ), + .UNSPECIFIED. ) ; +#34768 = LINE ( 'NONE', #44861, #20165 ) ; +#34769 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762100, 31.52620220503713000, -28.70555803802995200 ) ) ; +#34770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34771 = AXIS2_PLACEMENT_3D ( 'NONE', #25799, #13287, #50482 ) ; +#34772 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 35.04999999999997600, -28.20555803802995200 ) ) ; +#34773 = EDGE_CURVE ( 'NONE', #42204, #53788, #27889, .T. ) ; +#34774 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#34775 = EDGE_CURVE ( 'NONE', #3092, #27031, #62825, .T. ) ; +#34776 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 53.20037755566779200, -28.53664883431653700 ) ) ; +#34777 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734566500, 51.32559822014132300, -28.29986836858043400 ) ) ; +#34778 = ORIENTED_EDGE ( 'NONE', *, *, #53967, .F. ) ; +#34779 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36770, #74064, #5783, #49257 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169438000, 0.001302223101367930900 ), + .UNSPECIFIED. ) ; +#34780 = EDGE_CURVE ( 'NONE', #893, #33226, #13418, .T. ) ; +#34781 = AXIS2_PLACEMENT_3D ( 'NONE', #31335, #74836, #37534 ) ; +#34782 = CARTESIAN_POINT ( 'NONE', ( 10.93544426077530000, 80.09037803491472100, -28.29483400905907700 ) ) ; +#34783 = CONICAL_SURFACE ( 'NONE', #34953, 10.00000000000009200, 0.7853981633974447300 ) ; +#34785 = ORIENTED_EDGE ( 'NONE', *, *, #13317, .F. ) ; +#34784 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#34786 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 38.92298334620756600, -28.20555803802995200 ) ) ; +#34787 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 3.833333333333335300, 9.794441961969999600 ) ) ; +#34788 = VERTEX_POINT ( 'NONE', #1902 ) ; +#34789 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124981300, 85.13282980700518000, -28.53914313452737900 ) ) ; +#34790 = VERTEX_POINT ( 'NONE', #26970 ) ; +#34791 = FACE_OUTER_BOUND ( 'NONE', #41984, .T. ) ; +#34792 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 38.16666666666668600, -6.205558038030004800 ) ) ; +#34793 = AXIS2_PLACEMENT_3D ( 'NONE', #32903, #45381, #8128 ) ; +#34794 = AXIS2_PLACEMENT_3D ( 'NONE', #73539, #79793, #42220 ) ; +#34795 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428640500, 10.02858243452102000, -28.70555803802994200 ) ) ; +#34796 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#34797 = VERTEX_POINT ( 'NONE', #70449 ) ; +#34798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34799 = EDGE_CURVE ( 'NONE', #8719, #74753, #50113, .T. ) ; +#34800 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 3.166666666666684300, -9.205558038030003900 ) ) ; +#34801 = AXIS2_PLACEMENT_3D ( 'NONE', #69333, #32087, #75584 ) ; +#34802 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825477500, 70.16054007504466500, -28.34042301926890100 ) ) ; +#34803 = CONICAL_SURFACE ( 'NONE', #66707, 10.00000000000009400, 0.7853981633974447300 ) ; +#34804 = EDGE_LOOP ( 'NONE', ( #16424, #11092, #69157 ) ) ; +#34805 = CARTESIAN_POINT ( 'NONE', ( 9.170084184831466700, 44.44999999999809900, -1.162422678207586400 ) ) ; +#34806 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 40.50000000000000000, 6.847000845227641200 ) ) ; +#34807 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 30.74660241562181900, -28.20555803802995200 ) ) ; +#34808 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20954, #26943, #33178, #27213, #70694, #33436 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249978154400, 0.003859526499956308800 ), + .UNSPECIFIED. ) ; +#34809 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#34810 = EDGE_CURVE ( 'NONE', #18232, #1821, #68655, .T. ) ; +#34811 = VERTEX_POINT ( 'NONE', #32926 ) ; +#34812 = AXIS2_PLACEMENT_3D ( 'NONE', #2909, #27702, #77449 ) ; +#34813 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23914, #16585, #41580, #67409 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700460100, 0.0009400395309963178100 ), + .UNSPECIFIED. ) ; +#34814 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627436900, 47.43535825203925100, -28.53896444442201700 ) ) ; +#34815 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34817 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890733900, 30.62856921007284300, -28.37063977681167500 ) ) ; +#34818 = LINE ( 'NONE', #22518, #20204 ) ; +#34819 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 28.48922577050340600, -28.37255355648631300 ) ) ; +#34820 = CONICAL_SURFACE ( 'NONE', #49036, 10.00000000000009200, 0.7853981633974447300 ) ; +#34821 = EDGE_LOOP ( 'NONE', ( #70155, #26358, #30911, #5688 ) ) ; +#34822 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492308000, 83.03944396378781800, -28.70555803803004500 ) ) ; +#34823 = CARTESIAN_POINT ( 'NONE', ( -4.002028721724253800, 20.31091476818473800, -28.25432823872344600 ) ) ; +#34824 = VERTEX_POINT ( 'NONE', #70721 ) ; +#34825 = EDGE_LOOP ( 'NONE', ( #68615, #21724, #38148 ) ) ; +#34826 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34827 = AXIS2_PLACEMENT_3D ( 'NONE', #57805, #14296, #45250 ) ; +#34828 = PLANE ( 'NONE', #2112 ) ; +#34829 = ORIENTED_EDGE ( 'NONE', *, *, #65747, .T. ) ; +#34830 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 71.25732391202376400, -28.20555803803014400 ) ) ; +#34831 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171893900, 81.13768531620326000, -28.37082013777819300 ) ) ; +#34832 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34833 = ADVANCED_FACE ( 'NONE', ( #29751 ), #42337, .F. ) ; +#34834 = CARTESIAN_POINT ( 'NONE', ( -8.694833884776247900, 8.955677477148114500, -28.65273083505965700 ) ) ; +#34835 = ORIENTED_EDGE ( 'NONE', *, *, #52756, .F. ) ; +#34836 = CARTESIAN_POINT ( 'NONE', ( 8.239936510889833700E-014, 67.22261628933260600, -28.70555803802997700 ) ) ; +#34837 = ADVANCED_FACE ( 'NONE', ( #27793 ), #9239, .T. ) ; +#34838 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#34839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34840 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34841 = CIRCLE ( 'NONE', #42381, 10.50000000000009400 ) ; +#34842 = VERTEX_POINT ( 'NONE', #52194 ) ; +#34843 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 44.00000000000002100, -1.205558038030005300 ) ) ; +#34844 = ORIENTED_EDGE ( 'NONE', *, *, #71517, .T. ) ; +#34845 = CONICAL_SURFACE ( 'NONE', #44304, 10.00000000000009200, 0.7853981633974447300 ) ; +#34846 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 75.79999999999999700, -28.20555803802997700 ) ) ; +#34847 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580925600, 27.36736912940422100, -28.67620115463453700 ) ) ; +#34848 = AXIS2_PLACEMENT_3D ( 'NONE', #26955, #76972, #58198 ) ; +#34849 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807117100, 66.79999999999977000, -28.70555803803014400 ) ) ; +#34850 = CARTESIAN_POINT ( 'NONE', ( -10.75702442553440900, 80.16517473503391500, -28.29551658696701800 ) ) ; +#34851 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#34852 = VERTEX_POINT ( 'NONE', #58495 ) ; +#34853 = ADVANCED_FACE ( 'NONE', ( #11231 ), #56953, .T. ) ; +#34854 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#34855 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 55.00000000000000700, -9.205558038030005700 ) ) ; +#34856 = CIRCLE ( 'NONE', #4656, 10.00000000000009600 ) ; +#34857 = ORIENTED_EDGE ( 'NONE', *, *, #8638, .F. ) ; +#34858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34859 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 75.79999999999982700, -28.20555803803014400 ) ) ; +#34860 = ORIENTED_EDGE ( 'NONE', *, *, #56545, .T. ) ; +#34861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34862 = ORIENTED_EDGE ( 'NONE', *, *, #5674, .T. ) ; +#34863 = FACE_OUTER_BOUND ( 'NONE', #76067, .T. ) ; +#34864 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 71.43945992495517300, -28.34042301926893600 ) ) ; +#34865 = CARTESIAN_POINT ( 'NONE', ( 2.688821387764051000E-014, 44.37738371066726000, -28.70555803802999500 ) ) ; +#34866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74422, #30901, #43379, #6132 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849811900, 0.0007596411030280959600 ), + .UNSPECIFIED. ) ; +#34867 = CIRCLE ( 'NONE', #7221, 9.500000000000095900 ) ; +#34869 = EDGE_CURVE ( 'NONE', #61057, #67158, #79716, .T. ) ; +#34868 = ORIENTED_EDGE ( 'NONE', *, *, #24735, .T. ) ; +#34870 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660888200, 80.13716795162605400, -28.48697406221736400 ) ) ; +#34871 = EDGE_CURVE ( 'NONE', #28597, #5963, #73502, .T. ) ; +#34872 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660979200, 60.13716795162655200, -28.48697406221649300 ) ) ; +#34873 = ORIENTED_EDGE ( 'NONE', *, *, #51024, .T. ) ; +#34874 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 12.50000000000001200, 2.454695999814385600 ) ) ; +#34875 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387501500, 56.46717019299462200, -28.53914313452728600 ) ) ; +#34876 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72947, #29465, #4652, #48146 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108132900, 0.0006040461757766612500 ), + .UNSPECIFIED. ) ; +#34877 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260044900, 61.39965687931166400, -28.70555803803001600 ) ) ; +#34878 = EDGE_CURVE ( 'NONE', #359, #34842, #65291, .T. ) ; +#34879 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34880 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 52.66666666666667100, 5.722645192245505700 ) ) ; +#34881 = CYLINDRICAL_SURFACE ( 'NONE', #10808, 10.00000000000000000 ) ; +#34882 = EDGE_CURVE ( 'NONE', #10560, #28207, #75446, .T. ) ; +#34883 = CONICAL_SURFACE ( 'NONE', #7833, 10.50000000000009600, 0.7853981633974500600 ) ; +#34884 = ORIENTED_EDGE ( 'NONE', *, *, #63484, .F. ) ; +#34885 = AXIS2_PLACEMENT_3D ( 'NONE', #5893, #49358, #12149 ) ; +#34886 = ORIENTED_EDGE ( 'NONE', *, *, #59798, .T. ) ; +#34887 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 54.37738371066728900, -28.70555803802997700 ) ) ; +#34888 = VERTEX_POINT ( 'NONE', #58756 ) ; +#34889 = VERTEX_POINT ( 'NONE', #21780 ) ; +#34890 = ORIENTED_EDGE ( 'NONE', *, *, #12624, .T. ) ; +#34891 = EDGE_LOOP ( 'NONE', ( #67287, #61568, #58059 ) ) ; +#34892 = ORIENTED_EDGE ( 'NONE', *, *, #8520, .F. ) ; +#34893 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 28.42298334620784700, -28.20555803802994200 ) ) ; +#34894 = ORIENTED_EDGE ( 'NONE', *, *, #68605, .F. ) ; +#34895 = EDGE_LOOP ( 'NONE', ( #70385, #54461, #52416, #73703 ) ) ; +#34896 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34897 = ORIENTED_EDGE ( 'NONE', *, *, #14159, .T. ) ; +#34898 = AXIS2_PLACEMENT_3D ( 'NONE', #52829, #3049, #9303 ) ; +#34899 = EDGE_CURVE ( 'NONE', #2651, #77841, #50747, .T. ) ; +#34900 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78183, #71940, #46868, #40916 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241106200, 0.0005195704752302078500 ), + .UNSPECIFIED. ) ; +#34901 = CARTESIAN_POINT ( 'NONE', ( 9.042760264135456100, 55.79999999999999700, -28.53819074160684000 ) ) ; +#34902 = EDGE_CURVE ( 'NONE', #47697, #8912, #44258, .T. ) ; +#34903 = EDGE_CURVE ( 'NONE', #51448, #40430, #25831, .T. ) ; +#34904 = ADVANCED_FACE ( 'NONE', ( #15112 ), #65581, .T. ) ; +#34905 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.52242369685794200, -28.53861367218591000 ) ) ; +#34907 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 31.28933626866496500, -28.53923937255171600 ) ) ; +#34906 = AXIS2_PLACEMENT_3D ( 'NONE', #22193, #65719, #28490 ) ; +#34908 = ORIENTED_EDGE ( 'NONE', *, *, #23399, .T. ) ; +#34909 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34910 = FACE_OUTER_BOUND ( 'NONE', #56320, .T. ) ; +#34911 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284937400, 28.77966528189957200, -28.30868034705243700 ) ) ; +#34912 = ORIENTED_EDGE ( 'NONE', *, *, #51249, .F. ) ; +#34913 = AXIS2_PLACEMENT_3D ( 'NONE', #48286, #60320, #66828 ) ; +#34914 = ORIENTED_EDGE ( 'NONE', *, *, #5443, .F. ) ; +#34915 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583925600, 41.01125751638927900, -28.53740755999536900 ) ) ; +#34916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34917 = ORIENTED_EDGE ( 'NONE', *, *, #14841, .T. ) ; +#34918 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34919 = AXIS2_PLACEMENT_3D ( 'NONE', #19739, #63278, #26013 ) ; +#34920 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#34921 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 59.97246552159072800, -28.38801640354892800 ) ) ; +#34922 = CIRCLE ( 'NONE', #32335, 10.00000000000009200 ) ; +#34923 = EDGE_CURVE ( 'NONE', #24430, #6864, #36318, .T. ) ; +#34924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34925 = ADVANCED_FACE ( 'NONE', ( #71556 ), #5366, .T. ) ; +#34926 = CARTESIAN_POINT ( 'NONE', ( 4.266526781884004500, 28.70564881207731400, -28.41114655922340400 ) ) ; +#34927 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939081300, 46.18533208989821000, -28.53910738522653600 ) ) ; +#34928 = AXIS2_PLACEMENT_3D ( 'NONE', #6723, #25514, #459 ) ; +#34929 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#34930 = AXIS2_PLACEMENT_3D ( 'NONE', #14499, #33522, #77045 ) ; +#34931 = EDGE_LOOP ( 'NONE', ( #71884, #59377, #37625 ) ) ; +#34932 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#34933 = ORIENTED_EDGE ( 'NONE', *, *, #75503, .T. ) ; +#34934 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34938 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#34939 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34940 = FACE_OUTER_BOUND ( 'NONE', #38660, .T. ) ; +#34941 = EDGE_LOOP ( 'NONE', ( #38113, #77237, #69939, #74536 ) ) ; +#34942 = CARTESIAN_POINT ( 'NONE', ( -16.34768037227507500, 92.94768037227508700, -28.61432978906881200 ) ) ; +#34943 = AXIS2_PLACEMENT_3D ( 'NONE', #39133, #1874, #45370 ) ; +#34944 = ORIENTED_EDGE ( 'NONE', *, *, #79801, .F. ) ; +#34945 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309802100, 65.79999999999999700, -28.70555803802997700 ) ) ; +#34946 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 57.92318720225497900, -28.70555803802997700 ) ) ; +#34947 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999962300, 49.13176086632792300, -28.70555803802996700 ) ) ; +#34948 = CARTESIAN_POINT ( 'NONE', ( -16.68942240455976000, 67.07608412203501300, -28.56336785413097700 ) ) ; +#34949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34951 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2612, #9419, #59199, #21950 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.412374106065608900E-016, 0.001179148174663705000 ), + .UNSPECIFIED. ) ; +#34952 = ADVANCED_FACE ( 'NONE', ( #38411 ), #53031, .F. ) ; +#34953 = AXIS2_PLACEMENT_3D ( 'NONE', #2696, #27504, #46205 ) ; +#34954 = FACE_OUTER_BOUND ( 'NONE', #43214, .T. ) ; +#34955 = FACE_OUTER_BOUND ( 'NONE', #40308, .T. ) ; +#34956 = VERTEX_POINT ( 'NONE', #34836 ) ; +#34957 = ORIENTED_EDGE ( 'NONE', *, *, #25292, .T. ) ; +#34958 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 58.66666666666667100, -5.205558038030003100 ) ) ; +#34959 = AXIS2_PLACEMENT_3D ( 'NONE', #13561, #57064, #19799 ) ; +#34960 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898058200, 60.38105266879260600, -28.33409528117009700 ) ) ; +#34961 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#34962 = CARTESIAN_POINT ( 'NONE', ( 2.997978530266273400, 18.28907435382943100, -28.25433648786267700 ) ) ; +#34963 = EDGE_CURVE ( 'NONE', #10766, #59592, #58893, .T. ) ; +#34964 = CIRCLE ( 'NONE', #69644, 9.500000000000101300 ) ; +#34965 = ORIENTED_EDGE ( 'NONE', *, *, #71585, .F. ) ; +#34967 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #625, #75440, #895, #44373 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785989073400, 0.001246815221881415700 ), + .UNSPECIFIED. ) ; +#34966 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630000, 38.92298334620783600, -28.20555803802995200 ) ) ; +#34968 = FACE_OUTER_BOUND ( 'NONE', #65044, .T. ) ; +#34969 = VERTEX_POINT ( 'NONE', #53301 ) ; +#34970 = VERTEX_POINT ( 'NONE', #22576 ) ; +#34971 = AXIS2_PLACEMENT_3D ( 'NONE', #827, #44309, #7079 ) ; +#34972 = ORIENTED_EDGE ( 'NONE', *, *, #78739, .T. ) ; +#34973 = FACE_OUTER_BOUND ( 'NONE', #6251, .T. ) ; +#34974 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 52.83333333333334300, 0.9380355014189739600 ) ) ; +#34975 = ORIENTED_EDGE ( 'NONE', *, *, #26409, .T. ) ; +#34976 = EDGE_LOOP ( 'NONE', ( #1286, #27355, #5 ) ) ; +#34977 = EDGE_LOOP ( 'NONE', ( #6845, #77086, #22123, #74394, #40782 ) ) ; +#34978 = ORIENTED_EDGE ( 'NONE', *, *, #28727, .T. ) ; +#34979 = ORIENTED_EDGE ( 'NONE', *, *, #13857, .F. ) ; +#34980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34981 = EDGE_LOOP ( 'NONE', ( #59116, #63559, #80697, #45534 ) ) ; +#34982 = ORIENTED_EDGE ( 'NONE', *, *, #42791, .F. ) ; +#34983 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38357, #50592, #44583, #7355, #50863, #13662 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003310700, 0.004118671204006621500 ), + .UNSPECIFIED. ) ; +#34984 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551700, 76.13383585008105600, -28.37247596307124900 ) ) ; +#34985 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#34986 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#34987 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 30.00000000000001800, -1.205558038030002800 ) ) ; +#34988 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 49.66749699759768100, -28.20555803802996700 ) ) ; +#34989 = CIRCLE ( 'NONE', #56291, 10.00000000000009600 ) ; +#34991 = ORIENTED_EDGE ( 'NONE', *, *, #64105, .F. ) ; +#34990 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050735900, 38.57379779496234600, -28.70555803802995200 ) ) ; +#34992 = EDGE_CURVE ( 'NONE', #48589, #56550, #21874, .T. ) ; +#34993 = EDGE_LOOP ( 'NONE', ( #63233, #71543, #75936 ) ) ; +#34994 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#34995 = ORIENTED_EDGE ( 'NONE', *, *, #69889, .F. ) ; +#34996 = ORIENTED_EDGE ( 'NONE', *, *, #60193, .F. ) ; +#34998 = EDGE_CURVE ( 'NONE', #10538, #4580, #7378, .T. ) ; +#34997 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7432, #44657, #19979, #63509 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185220936769000E-007, 0.0006654852833079496400 ), + .UNSPECIFIED. ) ; +#34999 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#35000 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 60.34267608797601700, -28.20555803802997700 ) ) ; +#35001 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35002 = CONICAL_SURFACE ( 'NONE', #46834, 10.00000000000009200, 0.7853981633974447300 ) ; +#35003 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#35004 = EDGE_CURVE ( 'NONE', #60491, #78760, #73737, .T. ) ; +#35005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70953, #27465, #64745, #33697 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674116562500E-007, 0.0007987728781051912100 ), + .UNSPECIFIED. ) ; +#35006 = EDGE_LOOP ( 'NONE', ( #10356, #47811, #79613 ) ) ; +#35007 = ADVANCED_FACE ( 'NONE', ( #23881 ), #3389, .T. ) ; +#35008 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#35009 = EDGE_CURVE ( 'NONE', #51757, #71216, #19965, .T. ) ; +#35010 = AXIS2_PLACEMENT_3D ( 'NONE', #31289, #25311, #253 ) ; +#35011 = PLANE ( 'NONE', #1860 ) ; +#35012 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35013 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 64.50000000000001400, 2.454695999814385600 ) ) ; +#35014 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034405500, 38.92298334620738800, -28.20555803802996000 ) ) ; +#35015 = FACE_OUTER_BOUND ( 'NONE', #950, .T. ) ; +#35016 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195972100, 15.94142842854297200, -28.37229765499274200 ) ) ; +#35017 = ORIENTED_EDGE ( 'NONE', *, *, #26576, .T. ) ; +#35018 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 9.968680884981225200, -28.51286550264508800 ) ) ; +#35019 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.93250300240229200, -28.20555803802996700 ) ) ; +#35020 = EDGE_LOOP ( 'NONE', ( #52070, #56920, #76618, #50454 ) ) ; +#35021 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35022 = ORIENTED_EDGE ( 'NONE', *, *, #76463, .T. ) ; +#35023 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 70.34267608797553400, -28.20555803803047800 ) ) ; +#35024 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 90.34267608797567600, -28.20555803802997700 ) ) ; +#35025 = ADVANCED_FACE ( 'NONE', ( #36484 ), #34572, .F. ) ; +#35026 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949257800, 10.52620220503774500, -28.70555803803042500 ) ) ; +#35027 = AXIS2_PLACEMENT_3D ( 'NONE', #65037, #15239, #21518 ) ; +#35028 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#35029 = EDGE_CURVE ( 'NONE', #76395, #45369, #51052, .T. ) ; +#35030 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567154100, 20.24660241562189000, -28.20555803802994200 ) ) ; +#35031 = EDGE_CURVE ( 'NONE', #53696, #74996, #54988, .T. ) ; +#35032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#35033 = EDGE_CURVE ( 'NONE', #5506, #11987, #59258, .T. ) ; +#35034 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.94142842854297000, -28.20555803802997700 ) ) ; +#35035 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35036 = CARTESIAN_POINT ( 'NONE', ( -9.277608394786787100, 50.55000000000005400, -28.70555803802997400 ) ) ; +#35037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35038 = CARTESIAN_POINT ( 'NONE', ( 4.561825084090894900, 41.48385710212512100, -28.57719681746179300 ) ) ; +#35039 = AXIS2_PLACEMENT_3D ( 'NONE', #42417, #17163, #79710 ) ; +#35040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35041 = FACE_OUTER_BOUND ( 'NONE', #69935, .T. ) ; +#35042 = ADVANCED_FACE ( 'NONE', ( #67650 ), #49109, .F. ) ; +#35043 = CIRCLE ( 'NONE', #49877, 10.50000000000009200 ) ; +#35044 = VERTEX_POINT ( 'NONE', #4867 ) ; +#35045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35046 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 73.65857157145704500, -28.20555803803014400 ) ) ; +#35047 = EDGE_CURVE ( 'NONE', #46380, #49811, #7286, .T. ) ; +#35048 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#35049 = AXIS2_PLACEMENT_3D ( 'NONE', #61060, #23782, #67301 ) ; +#35050 = ORIENTED_EDGE ( 'NONE', *, *, #2724, .T. ) ; +#35051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35052 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 9.940690926013783000, -28.35186440610855700 ) ) ; +#35053 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75347, #13087, #56847, #19595 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487555952400, 0.001085359101287688000 ), + .UNSPECIFIED. ) ; +#35054 = ADVANCED_FACE ( 'NONE', ( #69582 ), #80289, .T. ) ; +#35055 = FACE_OUTER_BOUND ( 'NONE', #69098, .T. ) ; +#35056 = EDGE_LOOP ( 'NONE', ( #2938, #56356, #3327 ) ) ; +#35057 = CONICAL_SURFACE ( 'NONE', #4641, 10.50000000000009600, 0.7853981633974500600 ) ; +#35058 = VERTEX_POINT ( 'NONE', #36162 ) ; +#35059 = CARTESIAN_POINT ( 'NONE', ( 2.951898572809961600, 93.52999794783627900, -28.52121714037359000 ) ) ; +#35060 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#35061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35062 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 1.666666666666677200, -10.73183747965883100 ) ) ; +#35063 = CIRCLE ( 'NONE', #64229, 10.00000000000009600 ) ; +#35064 = ORIENTED_EDGE ( 'NONE', *, *, #75781, .T. ) ; +#35065 = ORIENTED_EDGE ( 'NONE', *, *, #18231, .T. ) ; +#35066 = EDGE_LOOP ( 'NONE', ( #6339, #80468, #33015, #75527 ) ) ; +#35067 = EDGE_LOOP ( 'NONE', ( #5459, #71347, #49756, #11555 ) ) ; +#35069 = ORIENTED_EDGE ( 'NONE', *, *, #2254, .F. ) ; +#35068 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567159000, 39.35339758437810100, -28.20555803802995200 ) ) ; +#35070 = ORIENTED_EDGE ( 'NONE', *, *, #56414, .T. ) ; +#35071 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 35.99999999999999300, 3.794441961969998300 ) ) ; +#35072 = AXIS2_PLACEMENT_3D ( 'NONE', #41425, #47653, #78719 ) ; +#35073 = ORIENTED_EDGE ( 'NONE', *, *, #45793, .T. ) ; +#35074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35075 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506397300, 49.58087956867520800, -28.30223257055574800 ) ) ; +#35076 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#35077 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 1.000000000000000900, 6.794441961969995200 ) ) ; +#35078 = AXIS2_PLACEMENT_3D ( 'NONE', #51835, #20886, #76900 ) ; +#35079 = ORIENTED_EDGE ( 'NONE', *, *, #58349, .F. ) ; +#35080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35081 = FACE_OUTER_BOUND ( 'NONE', #5135, .T. ) ; +#35082 = ORIENTED_EDGE ( 'NONE', *, *, #42625, .T. ) ; +#35083 = CARTESIAN_POINT ( 'NONE', ( 6.421168944261220100, 44.44999999999999600, -8.138729359741585500 ) ) ; +#35084 = ORIENTED_EDGE ( 'NONE', *, *, #66804, .F. ) ; +#35085 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 57.92318720225497900, -28.70555803802997700 ) ) ; +#35086 = EDGE_CURVE ( 'NONE', #30007, #68074, #44740, .T. ) ; +#35087 = ORIENTED_EDGE ( 'NONE', *, *, #65118, .T. ) ; +#35088 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 38.33333333333333600, -10.73183747965883100 ) ) ; +#35089 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 81.25732391202386400, -28.20555803803014400 ) ) ; +#35090 = AXIS2_PLACEMENT_3D ( 'NONE', #35765, #79035, #41996 ) ; +#35091 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 81.25732391202397800, -28.20555803802997700 ) ) ; +#35092 = CONICAL_SURFACE ( 'NONE', #17066, 10.00000000000009400, 0.7853981633974447300 ) ; +#35094 = AXIS2_PLACEMENT_3D ( 'NONE', #50033, #296, #31338 ) ; +#35093 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6542, #43773, #19049, #62574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002139977954368458800, 0.002490143138876298700 ), + .UNSPECIFIED. ) ; +#35095 = ORIENTED_EDGE ( 'NONE', *, *, #18008, .T. ) ; +#35096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35098 = EDGE_LOOP ( 'NONE', ( #42897, #999, #52428, #26045 ) ) ; +#35097 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567176700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#35099 = CARTESIAN_POINT ( 'NONE', ( -16.93949773756162000, 93.53949773756163200, -28.51567264113192500 ) ) ; +#35100 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 69.94924284854654700, -28.20555803803014400 ) ) ; +#35101 = AXIS2_PLACEMENT_3D ( 'NONE', #43432, #68476, #24956 ) ; +#35102 = VECTOR ( 'NONE', #61917, 1000.000000000000000 ) ; +#35103 = ORIENTED_EDGE ( 'NONE', *, *, #18554, .F. ) ; +#35104 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 80.16749699759769500, -28.20555803802997700 ) ) ; +#35105 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67315, #11294, #48772, #11568 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714869512300E-007, 0.0005869108620977575000 ), + .UNSPECIFIED. ) ; +#35106 = ORIENTED_EDGE ( 'NONE', *, *, #2669, .F. ) ; +#35107 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.79999999999999700, -28.20555803802997700 ) ) ; +#35108 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310461500, 9.997690108970880700, -28.61774594594333000 ) ) ; +#35109 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#35110 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#35111 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 22.65857157145701000, -28.20555803802995200 ) ) ; +#35112 = ADVANCED_FACE ( 'NONE', ( #32592 ), #47157, .F. ) ; +#35113 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35114 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#35115 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35116 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35117 = EDGE_CURVE ( 'NONE', #31077, #20598, #30362, .T. ) ; +#35118 = FACE_OUTER_BOUND ( 'NONE', #45212, .T. ) ; +#35119 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 41.83333333333332900, 0.9380355014189731800 ) ) ; +#35120 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 89.60439022488337500, -28.70555803802997700 ) ) ; +#35121 = EDGE_CURVE ( 'NONE', #58529, #59592, #15878, .T. ) ; +#35122 = ORIENTED_EDGE ( 'NONE', *, *, #30852, .T. ) ; +#35123 = ORIENTED_EDGE ( 'NONE', *, *, #69570, .F. ) ; +#35124 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155515000, 85.79999999999967000, -28.20555803803030800 ) ) ; +#35125 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#35126 = ADVANCED_FACE ( 'NONE', ( #21913 ), #14107, .F. ) ; +#35127 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35128 = CARTESIAN_POINT ( 'NONE', ( -0.3600649073968119600, 57.15000000000000600, 7.495441902515466400 ) ) ; +#35129 = EDGE_CURVE ( 'NONE', #61277, #78744, #1403, .T. ) ; +#35130 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35131 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7445, #32221, #13753, #57237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634977728700E-007, 0.0008082706238602385700 ), + .UNSPECIFIED. ) ; +#35132 = FACE_OUTER_BOUND ( 'NONE', #31028, .T. ) ; +#35133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35134 = EDGE_LOOP ( 'NONE', ( #28521, #35579, #30472, #65465 ) ) ; +#35135 = ORIENTED_EDGE ( 'NONE', *, *, #31908, .T. ) ; +#35136 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#35137 = EDGE_CURVE ( 'NONE', #5650, #77318, #67739, .T. ) ; +#35138 = CARTESIAN_POINT ( 'NONE', ( 0.9480595314138696700, 57.07371263207993200, 6.794441961969995200 ) ) ; +#35139 = EDGE_CURVE ( 'NONE', #44206, #31689, #53266, .T. ) ; +#35140 = ADVANCED_FACE ( 'NONE', ( #65712 ), #63760, .T. ) ; +#35141 = CONICAL_SURFACE ( 'NONE', #60531, 10.50000000000009600, 0.7853981633974482800 ) ; +#35142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35143 = VERTEX_POINT ( 'NONE', #49420 ) ; +#35144 = ORIENTED_EDGE ( 'NONE', *, *, #45002, .T. ) ; +#35145 = ORIENTED_EDGE ( 'NONE', *, *, #76898, .F. ) ; +#35146 = EDGE_LOOP ( 'NONE', ( #11888, #80678, #52283, #79285 ) ) ; +#35147 = ADVANCED_FACE ( 'NONE', ( #18011 ), #61994, .T. ) ; +#35148 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003200, 81.43250300240195800, -28.20555803803030800 ) ) ; +#35149 = ORIENTED_EDGE ( 'NONE', *, *, #17269, .T. ) ; +#35150 = AXIS2_PLACEMENT_3D ( 'NONE', #26168, #69643, #32400 ) ; +#35151 = EDGE_CURVE ( 'NONE', #46628, #25185, #30671, .T. ) ; +#35152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35153 = EDGE_CURVE ( 'NONE', #56903, #14966, #38772, .T. ) ; +#35154 = EDGE_CURVE ( 'NONE', #77818, #70214, #24356, .T. ) ; +#35155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35156 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19445, #56692, #13213, #62977 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207940065300E-007, 0.0008724366121409702700 ), + .UNSPECIFIED. ) ; +#35157 = ADVANCED_FACE ( 'NONE', ( #61811 ), #76375, .F. ) ; +#35158 = CIRCLE ( 'NONE', #9857, 10.50000000000009600 ) ; +#35159 = AXIS2_PLACEMENT_3D ( 'NONE', #61035, #23764, #67266 ) ; +#35160 = ORIENTED_EDGE ( 'NONE', *, *, #75696, .T. ) ; +#35161 = ORIENTED_EDGE ( 'NONE', *, *, #70011, .F. ) ; +#35162 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35163 = ORIENTED_EDGE ( 'NONE', *, *, #52892, .F. ) ; +#35164 = ORIENTED_EDGE ( 'NONE', *, *, #76931, .F. ) ; +#35165 = ORIENTED_EDGE ( 'NONE', *, *, #78861, .F. ) ; +#35166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35167 = ORIENTED_EDGE ( 'NONE', *, *, #70961, .T. ) ; +#35168 = FACE_OUTER_BOUND ( 'NONE', #67668, .T. ) ; +#35169 = AXIS2_PLACEMENT_3D ( 'NONE', #45355, #39113, #69608 ) ; +#35170 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 10.33333333333335300, -3.705558038030004400 ) ) ; +#35171 = AXIS2_PLACEMENT_3D ( 'NONE', #16186, #59712, #22438 ) ; +#35172 = ORIENTED_EDGE ( 'NONE', *, *, #46944, .F. ) ; +#35173 = AXIS2_PLACEMENT_3D ( 'NONE', #48565, #11359, #54846 ) ; +#35174 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#35175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35176 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 50.50000000000000700, -7.061964498581022400 ) ) ; +#35177 = ORIENTED_EDGE ( 'NONE', *, *, #70463, .T. ) ; +#35178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35179 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35180 = CIRCLE ( 'NONE', #70671, 10.00000000000009200 ) ; +#35181 = ORIENTED_EDGE ( 'NONE', *, *, #67011, .T. ) ; +#35182 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198469800, 50.90033558196108000, -28.70555803802997700 ) ) ; +#35183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6426, #18926, #68705, #31469 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083080053800E-007, 0.0003101809493109008500 ), + .UNSPECIFIED. ) ; +#35184 = CARTESIAN_POINT ( 'NONE', ( -15.07025710783655000, 9.859485784326885500, -28.70457077705549100 ) ) ; +#35185 = AXIS2_PLACEMENT_3D ( 'NONE', #20424, #51371, #26691 ) ; +#35186 = EDGE_CURVE ( 'NONE', #61679, #51665, #28749, .T. ) ; +#35187 = CARTESIAN_POINT ( 'NONE', ( -15.31009149620114200, 50.54999999999999000, -28.51528817706617500 ) ) ; +#35188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35189 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 81.52858243452105600, -28.70555803802997700 ) ) ; +#35190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35191 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 61.82440674572717400, -28.45987523529583300 ) ) ; +#35192 = EDGE_CURVE ( 'NONE', #25758, #24948, #9888, .T. ) ; +#35193 = PLANE ( 'NONE', #61649 ) ; +#35194 = EDGE_LOOP ( 'NONE', ( #18409, #52526, #48955, #68384 ) ) ; +#35195 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35196 = ORIENTED_EDGE ( 'NONE', *, *, #15351, .F. ) ; +#35197 = AXIS2_PLACEMENT_3D ( 'NONE', #44241, #38014, #7023 ) ; +#35198 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#35199 = ORIENTED_EDGE ( 'NONE', *, *, #43324, .T. ) ; +#35200 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35201 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35202 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 90.16749699759755300, -28.20555803803030800 ) ) ; +#35203 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#35204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35205 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35206 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#35207 = CIRCLE ( 'NONE', #51745, 9.500000000000097700 ) ; +#35208 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35209 = ORIENTED_EDGE ( 'NONE', *, *, #17342, .F. ) ; +#35210 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385194500, 41.60677350908856900, -28.30799595738883000 ) ) ; +#35211 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205874400, 31.01754275546395000, -28.27504145778805600 ) ) ; +#35212 = AXIS2_PLACEMENT_3D ( 'NONE', #62522, #25262, #68772 ) ; +#35213 = ORIENTED_EDGE ( 'NONE', *, *, #2460, .T. ) ; +#35214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35215 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 80.29722425778841500, -28.32715733700494500 ) ) ; +#35216 = VERTEX_POINT ( 'NONE', #31512 ) ; +#35217 = CIRCLE ( 'NONE', #65183, 10.00000000000009200 ) ; +#35218 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35219 = ORIENTED_EDGE ( 'NONE', *, *, #44805, .F. ) ; +#35221 = VERTEX_POINT ( 'NONE', #43706 ) ; +#35220 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35222 = ORIENTED_EDGE ( 'NONE', *, *, #46192, .F. ) ; +#35223 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428612000, 39.07141756547895300, -28.70555803802995200 ) ) ; +#35224 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35225 = AXIS2_PLACEMENT_3D ( 'NONE', #51616, #76667, #64210 ) ; +#35226 = CIRCLE ( 'NONE', #70272, 10.00000000000009600 ) ; +#35227 = CARTESIAN_POINT ( 'NONE', ( -3.639407206442136100, 18.16749699759768800, -28.25435056028468100 ) ) ; +#35228 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 61.82440674572717400, -28.45987523529583300 ) ) ; +#35229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77380, #40109, #46329, #9074 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287104276100E-007, 0.0004318378175232945800 ), + .UNSPECIFIED. ) ; +#35230 = ORIENTED_EDGE ( 'NONE', *, *, #74726, .T. ) ; +#35231 = VECTOR ( 'NONE', #36761, 1000.000000000000000 ) ; +#35232 = EDGE_CURVE ( 'NONE', #2862, #49270, #12166, .T. ) ; +#35233 = ORIENTED_EDGE ( 'NONE', *, *, #26300, .T. ) ; +#35234 = ORIENTED_EDGE ( 'NONE', *, *, #50322, .T. ) ; +#35235 = ORIENTED_EDGE ( 'NONE', *, *, #44329, .T. ) ; +#35236 = VERTEX_POINT ( 'NONE', #56512 ) ; +#35237 = ORIENTED_EDGE ( 'NONE', *, *, #36639, .T. ) ; +#35238 = ADVANCED_FACE ( 'NONE', ( #1437 ), #10203, .T. ) ; +#35239 = CONICAL_SURFACE ( 'NONE', #34698, 10.50000000000009600, 0.7853981633974500600 ) ; +#35240 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 56.50000000000002800, 4.650848422521012700 ) ) ; +#35241 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35242 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#35243 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#35244 = ADVANCED_FACE ( 'NONE', ( #45188 ), #57888, .F. ) ; +#35245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35246 = EDGE_CURVE ( 'NONE', #30284, #31582, #76196, .T. ) ; +#35247 = EDGE_CURVE ( 'NONE', #13752, #5847, #61772, .T. ) ; +#35248 = CIRCLE ( 'NONE', #58640, 10.00000000000009200 ) ; +#35249 = ORIENTED_EDGE ( 'NONE', *, *, #23317, .T. ) ; +#35251 = ORIENTED_EDGE ( 'NONE', *, *, #19654, .F. ) ; +#35250 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274713600, 14.05000000000000800, -28.20555803802992800 ) ) ; +#35252 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275506100, 50.66666666666668600, -5.205558038030008400 ) ) ; +#35253 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630700, 28.42298334620784000, -28.20555803802994200 ) ) ; +#35254 = AXIS2_PLACEMENT_3D ( 'NONE', #17216, #60746, #23473 ) ; +#35255 = EDGE_CURVE ( 'NONE', #3945, #18254, #43269, .T. ) ; +#35256 = EDGE_CURVE ( 'NONE', #53533, #36405, #47249, .T. ) ; +#35257 = EDGE_CURVE ( 'NONE', #14896, #23115, #16063, .T. ) ; +#35258 = ADVANCED_FACE ( 'NONE', ( #78356 ), #55921, .T. ) ; +#35259 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555678000, 59.72166103827329000, -28.53892303408229800 ) ) ; +#35260 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823703100, 48.69543746431602900, -28.61277292027075300 ) ) ; +#35261 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819156900, 71.65075715145272300, -28.20555803803005900 ) ) ; +#35262 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 27.83333333333334300, -4.152999154772353500 ) ) ; +#35263 = EDGE_CURVE ( 'NONE', #31373, #74558, #72502, .T. ) ; +#35264 = AXIS2_PLACEMENT_3D ( 'NONE', #65752, #28516, #72009 ) ; +#35265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35266 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999994000, 38.63176086632793000, -28.70555803802995200 ) ) ; +#35267 = VERTEX_POINT ( 'NONE', #20078 ) ; +#35268 = PLANE ( 'NONE', #11566 ) ; +#35269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77476, #58711, #46427, #9179 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815665825500E-007, 0.0007763385940576989800 ), + .UNSPECIFIED. ) ; +#35270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35271 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.36762008758048400, -28.26633708900883900 ) ) ; +#35272 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819191100, 59.94924284854719300, -28.20555803802997700 ) ) ; +#35274 = ORIENTED_EDGE ( 'NONE', *, *, #71847, .T. ) ; +#35273 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362749100, 57.56528145730370500, -28.66119098264620700 ) ) ; +#35275 = AXIS2_PLACEMENT_3D ( 'NONE', #79853, #42557, #5320 ) ; +#35276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35277 = AXIS2_PLACEMENT_3D ( 'NONE', #14618, #64417, #51824 ) ; +#35278 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35279 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040599400, 47.44142842854297000, -28.37229765499281000 ) ) ; +#35280 = FACE_OUTER_BOUND ( 'NONE', #41957, .T. ) ; +#35281 = VERTEX_POINT ( 'NONE', #7521 ) ; +#35282 = FACE_OUTER_BOUND ( 'NONE', #3678, .T. ) ; +#35283 = VERTEX_POINT ( 'NONE', #76074 ) ; +#35284 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 62.33333333333335000, -3.705558038030004400 ) ) ; +#35285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35286 = PLANE ( 'NONE', #64462 ) ; +#35287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35288 = FACE_OUTER_BOUND ( 'NONE', #17273, .T. ) ; +#35289 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35290 = ORIENTED_EDGE ( 'NONE', *, *, #26576, .F. ) ; +#35291 = ORIENTED_EDGE ( 'NONE', *, *, #75583, .T. ) ; +#35292 = EDGE_LOOP ( 'NONE', ( #47328, #8705, #47585, #72067, #56064 ) ) ; +#35293 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180791100, 59.94924284854687400, -28.20555803802997700 ) ) ; +#35294 = EDGE_LOOP ( 'NONE', ( #9113, #43128, #69184 ) ) ; +#35295 = AXIS2_PLACEMENT_3D ( 'NONE', #13023, #56516, #19253 ) ; +#35296 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306343500, 39.00210619075126300, -28.25343951603344500 ) ) ; +#35297 = EDGE_CURVE ( 'NONE', #79303, #43592, #8209, .T. ) ; +#35298 = CIRCLE ( 'NONE', #70759, 10.00000000000009600 ) ; +#35299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35300 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541607800, 29.08874248361072300, -28.53740755999534400 ) ) ; +#35301 = VERTEX_POINT ( 'NONE', #45023 ) ; +#35302 = CARTESIAN_POINT ( 'NONE', ( -6.625198948454311700, 50.55000000000000400, -28.45531454621837100 ) ) ; +#35303 = ORIENTED_EDGE ( 'NONE', *, *, #35511, .F. ) ; +#35304 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.23796787468685900, -28.38801640354854800 ) ) ; +#35305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35306 = CIRCLE ( 'NONE', #10816, 10.00000000000009400 ) ; +#35307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35308 = VERTEX_POINT ( 'NONE', #63595 ) ; +#35309 = EDGE_CURVE ( 'NONE', #26524, #57238, #24801, .T. ) ; +#35310 = ORIENTED_EDGE ( 'NONE', *, *, #68946, .T. ) ; +#35311 = CARTESIAN_POINT ( 'NONE', ( 4.239894507327713700, 89.66414768974083000, -28.38420446581277900 ) ) ; +#35312 = AXIS2_PLACEMENT_3D ( 'NONE', #74250, #37196, #80737 ) ; +#35313 = AXIS2_PLACEMENT_3D ( 'NONE', #30756, #36973, #24488 ) ; +#35314 = VERTEX_POINT ( 'NONE', #20329 ) ; +#35315 = ORIENTED_EDGE ( 'NONE', *, *, #50799, .T. ) ; +#35316 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#35317 = FACE_OUTER_BOUND ( 'NONE', #8697, .T. ) ; +#35318 = ORIENTED_EDGE ( 'NONE', *, *, #51581, .T. ) ; +#35319 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#35320 = CARTESIAN_POINT ( 'NONE', ( -0.8996655518395213500, 80.79999999999999700, -28.20555803802989600 ) ) ; +#35321 = FACE_OUTER_BOUND ( 'NONE', #63455, .T. ) ; +#35322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35323 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 9.968680884981225200, -28.51286550264508800 ) ) ; +#35324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35325 = ADVANCED_FACE ( 'NONE', ( #74448 ), #53969, .F. ) ; +#35326 = ORIENTED_EDGE ( 'NONE', *, *, #6550, .F. ) ; +#35327 = AXIS2_PLACEMENT_3D ( 'NONE', #30900, #68415, #49611 ) ; +#35328 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#35329 = CONICAL_SURFACE ( 'NONE', #29980, 10.00000000000009200, 0.7853981633974447300 ) ; +#35330 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35331 = ORIENTED_EDGE ( 'NONE', *, *, #59681, .T. ) ; +#35332 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, -0.4999999999999870700, 6.847000845227646500 ) ) ; +#35333 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28252, #65504, #40697, #3435 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775793222900, 0.0009605145132142221900 ), + .UNSPECIFIED. ) ; +#35334 = COLOUR_RGB ( '',0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ; +#35335 = CARTESIAN_POINT ( 'NONE', ( 7.899665551839473400, 80.79999999999984100, -28.20555803803004100 ) ) ; +#35336 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33045, #63808, #51769, #14556 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278322300, 0.0005468822770175648700 ), + .UNSPECIFIED. ) ; +#35337 = ADVANCED_FACE ( 'NONE', ( #6295 ), #20907, .F. ) ; +#35338 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 33.83333333333333600, -6.205558038030004800 ) ) ; +#35339 = AXIS2_PLACEMENT_3D ( 'NONE', #19436, #62974, #25718 ) ; +#35340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35341 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873539100, 22.17955320215950700, -28.64059091698902600 ) ) ; +#35342 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, -1.166666666666651200, -9.205558038030003900 ) ) ; +#35343 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6376, #43610, #18883, #62408 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418781233401400E-007, 0.0002745453538439340900 ), + .UNSPECIFIED. ) ; +#35344 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662741841000, 83.66464174796055900, -28.53896444442204600 ) ) ; +#35345 = EDGE_CURVE ( 'NONE', #2875, #54282, #41340, .T. ) ; +#35346 = CARTESIAN_POINT ( 'NONE', ( -1.076980892916454200, 44.44999999999999600, -10.64218282336635300 ) ) ; +#35347 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#35348 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 36.16666666666667100, 9.794441961969994300 ) ) ; +#35349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35350 = VERTEX_POINT ( 'NONE', #20608 ) ; +#35351 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 30.85277818615432100, -28.70555803802999200 ) ) ; +#35352 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433000, 12.16464174796073600, -28.53896444442197800 ) ) ; +#35353 = ORIENTED_EDGE ( 'NONE', *, *, #60418, .F. ) ; +#35354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53280, #9784, #78326, #41047 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925603910700E-007, 0.0004084731003436738200 ), + .UNSPECIFIED. ) ; +#35355 = ORIENTED_EDGE ( 'NONE', *, *, #70600, .F. ) ; +#35356 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35357 = ADVANCED_FACE ( 'NONE', ( #37408 ), #68584, .T. ) ; +#35358 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 60.16349705304866500, -28.30782889147482400 ) ) ; +#35359 = FACE_OUTER_BOUND ( 'NONE', #3041, .T. ) ; +#35360 = ORIENTED_EDGE ( 'NONE', *, *, #6975, .T. ) ; +#35361 = FACE_OUTER_BOUND ( 'NONE', #51964, .T. ) ; +#35362 = EDGE_CURVE ( 'NONE', #1321, #54383, #32811, .T. ) ; +#35363 = ORIENTED_EDGE ( 'NONE', *, *, #11167, .T. ) ; +#35364 = PLANE ( 'NONE', #62399 ) ; +#35365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35366 = VERTEX_POINT ( 'NONE', #2075 ) ; +#35367 = FACE_OUTER_BOUND ( 'NONE', #77903, .T. ) ; +#35368 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 90.16054007504463600, -28.34042301926880800 ) ) ; +#35369 = EDGE_CURVE ( 'NONE', #7843, #16848, #70515, .T. ) ; +#35370 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 30.94069092601378700, -28.35186440610858600 ) ) ; +#35371 = VERTEX_POINT ( 'NONE', #14614 ) ; +#35372 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#35373 = VERTEX_POINT ( 'NONE', #70626 ) ; +#35374 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187867700, 79.99813478817169700, -28.24089224568490400 ) ) ; +#35375 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670951500, 21.15863441772060900, -28.48677465922828100 ) ) ; +#35376 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#35377 = ORIENTED_EDGE ( 'NONE', *, *, #60781, .F. ) ; +#35378 = EDGE_CURVE ( 'NONE', #50605, #23507, #39367, .T. ) ; +#35379 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#35380 = FACE_OUTER_BOUND ( 'NONE', #32123, .T. ) ; +#35381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8986, #15011, #33775, #52516, #15285, #58788 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0003916983562614932900, 0.001136699028516357800, 0.001881699700771226800 ), + .UNSPECIFIED. ) ; +#35382 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35383 = EDGE_CURVE ( 'NONE', #53604, #49071, #22851, .T. ) ; +#35384 = CARTESIAN_POINT ( 'NONE', ( -16.56643609059975800, 33.87492275335525000, -28.58387515229126000 ) ) ; +#35385 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192773200, 64.80000000000008200, -28.70555803802997700 ) ) ; +#35386 = ORIENTED_EDGE ( 'NONE', *, *, #76965, .F. ) ; +#35387 = CONICAL_SURFACE ( 'NONE', #62900, 10.50000000000009900, 0.7853981633974518300 ) ; +#35388 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 39.66666666666667900, -5.205558038030003100 ) ) ; +#35389 = ORIENTED_EDGE ( 'NONE', *, *, #54080, .T. ) ; +#35390 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, 16.29444196196997700 ) ) ; +#35391 = ORIENTED_EDGE ( 'NONE', *, *, #8758, .F. ) ; +#35392 = VERTEX_POINT ( 'NONE', #76890 ) ; +#35393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35394 = ORIENTED_EDGE ( 'NONE', *, *, #71054, .T. ) ; +#35395 = FACE_OUTER_BOUND ( 'NONE', #61445, .T. ) ; +#35396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35399 = AXIS2_PLACEMENT_3D ( 'NONE', #70004, #32751, #76267 ) ; +#35400 = ORIENTED_EDGE ( 'NONE', *, *, #14256, .T. ) ; +#35401 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658419600, 80.15151454780948400, -28.67627428870426000 ) ) ; +#35402 = CARTESIAN_POINT ( 'NONE', ( -6.439158162624512900, 57.15000000000002000, 5.411255915507845200 ) ) ; +#35403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35404 = EDGE_CURVE ( 'NONE', #9298, #51716, #4345, .T. ) ; +#35405 = EDGE_CURVE ( 'NONE', #29376, #4625, #51981, .T. ) ; +#35406 = VERTEX_POINT ( 'NONE', #33643 ) ; +#35407 = AXIS2_PLACEMENT_3D ( 'NONE', #61274, #54976, #17744 ) ; +#35408 = VERTEX_POINT ( 'NONE', #64951 ) ; +#35409 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35411 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ; +#35412 = FACE_OUTER_BOUND ( 'NONE', #39748, .T. ) ; +#35413 = CARTESIAN_POINT ( 'NONE', ( -20.23749094015580100, 7.381254776493703300, -27.22428460165802000 ) ) ; +#35414 = PLANE ( 'NONE', #61155 ) ; +#35415 = EDGE_CURVE ( 'NONE', #74753, #29475, #18364, .T. ) ; +#35416 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 12.17681279774500400, -28.70555803802994200 ) ) ; +#35417 = AXIS2_PLACEMENT_3D ( 'NONE', #8215, #45193, #45457 ) ; +#35418 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000006900, 63.20037755566776400, -28.53664883431653700 ) ) ; +#35419 = ADVANCED_FACE ( 'NONE', ( #66641 ), #424, .F. ) ; +#35420 = CIRCLE ( 'NONE', #10182, 9.500000000000099500 ) ; +#35421 = AXIS2_PLACEMENT_3D ( 'NONE', #42003, #73315, #36039 ) ; +#35422 = ORIENTED_EDGE ( 'NONE', *, *, #66212, .T. ) ; +#35423 = ADVANCED_FACE ( 'NONE', ( #35506 ), #48099, .F. ) ; +#35424 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 8.166666666666680300, 0.1341879241256129200 ) ) ; +#35425 = ORIENTED_EDGE ( 'NONE', *, *, #24058, .T. ) ; +#35426 = CARTESIAN_POINT ( 'NONE', ( 11.39745464760882900, 50.73330895810809700, -28.60301268563901500 ) ) ; +#35427 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 48.33333333333334300, 2.794441961969998300 ) ) ; +#35428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44295, #803, #56850, #19602 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099552960713900E-007, 0.0008759529789578684800 ), + .UNSPECIFIED. ) ; +#35429 = FACE_OUTER_BOUND ( 'NONE', #9493, .T. ) ; +#35430 = AXIS2_PLACEMENT_3D ( 'NONE', #8404, #76685, #51901 ) ; +#35431 = VERTEX_POINT ( 'NONE', #40423 ) ; +#35432 = CIRCLE ( 'NONE', #15382, 10.00000000000009600 ) ; +#35433 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462194600, 70.20590598242353100, -28.39369363572387800 ) ) ; +#35434 = EDGE_LOOP ( 'NONE', ( #59549, #64261, #59553 ) ) ; +#35435 = ADVANCED_FACE ( 'NONE', ( #33527 ), #15034, .F. ) ; +#35436 = VERTEX_POINT ( 'NONE', #52919 ) ; +#35437 = CIRCLE ( 'NONE', #45372, 10.00000000000009200 ) ; +#35438 = VERTEX_POINT ( 'NONE', #15679 ) ; +#35439 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55850, #12365, #68378, #31134 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750182292600, 0.005168056621189865900 ), + .UNSPECIFIED. ) ; +#35440 = ORIENTED_EDGE ( 'NONE', *, *, #29444, .T. ) ; +#35441 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702741500, 59.37488905616160700, -28.55192314908416100 ) ) ; +#35442 = EDGE_LOOP ( 'NONE', ( #29259, #24044, #45730, #9510 ) ) ; +#35443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35444 = AXIS2_PLACEMENT_3D ( 'NONE', #72466, #35204, #78718 ) ; +#35445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1211, #76013, #14010, #57522, #20261, #63800 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409473600, 0.003857515824818947200 ), + .UNSPECIFIED. ) ; +#35446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35447 = ADVANCED_FACE ( 'NONE', ( #50035 ), #62743, .F. ) ; +#35448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35449 = EDGE_CURVE ( 'NONE', #42969, #25284, #79283, .T. ) ; +#35451 = FACE_OUTER_BOUND ( 'NONE', #56281, .T. ) ; +#35450 = CARTESIAN_POINT ( 'NONE', ( -11.72239160521347200, 50.54999999999999700, -28.70555803802997400 ) ) ; +#35452 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35453 = ORIENTED_EDGE ( 'NONE', *, *, #3394, .T. ) ; +#35454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35455 = FACE_OUTER_BOUND ( 'NONE', #75910, .T. ) ; +#35456 = AXIS2_PLACEMENT_3D ( 'NONE', #47043, #9815, #53321 ) ; +#35457 = ORIENTED_EDGE ( 'NONE', *, *, #17501, .T. ) ; +#35458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35460 = ORIENTED_EDGE ( 'NONE', *, *, #52884, .F. ) ; +#35459 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31661, #25686, #75436, #38142 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248431800, 0.0008027336008625343400 ), + .UNSPECIFIED. ) ; +#35461 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#35462 = VERTEX_POINT ( 'NONE', #71724 ) ; +#35463 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345582300, 61.52472935029874900, -28.39317435246162100 ) ) ; +#35464 = ORIENTED_EDGE ( 'NONE', *, *, #28256, .T. ) ; +#35465 = CONICAL_SURFACE ( 'NONE', #15279, 10.00000000000009600, 0.7853981633974482800 ) ; +#35466 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448300, 85.79999999999998300, -28.20555803802997700 ) ) ; +#35467 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700200, 23.61903418172678600, -28.69431509262337700 ) ) ; +#35469 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4394, #78952, #35433, #10664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258794292500E-007, 0.0004559721492007869400 ), + .UNSPECIFIED. ) ; +#35468 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614782900, 49.49322649091141800, -28.30799595738881900 ) ) ; +#35470 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 67.92318720225497900, -28.70555803802997700 ) ) ; +#35471 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#35472 = VERTEX_POINT ( 'NONE', #77965 ) ; +#35473 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#35474 = EDGE_LOOP ( 'NONE', ( #20621, #15443, #4094 ) ) ; +#35475 = EDGE_CURVE ( 'NONE', #64447, #15269, #3893, .T. ) ; +#35476 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35478 = VERTEX_POINT ( 'NONE', #15950 ) ; +#35479 = CONICAL_SURFACE ( 'NONE', #39280, 10.50000000000009600, 0.7853981633974518300 ) ; +#35480 = EDGE_CURVE ( 'NONE', #13589, #26055, #31601, .T. ) ; +#35481 = CARTESIAN_POINT ( 'NONE', ( -3.628494729608065400, 71.43250300240228500, -28.25053119339279900 ) ) ; +#35482 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 90.34267608797600200, -28.20555803802997700 ) ) ; +#35483 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385104300, 10.10677350908850700, -28.30799595738889700 ) ) ; +#35484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35485 = EDGE_CURVE ( 'NONE', #66973, #58176, #70200, .T. ) ; +#35486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35487 = EDGE_CURVE ( 'NONE', #38012, #56550, #18933, .T. ) ; +#35488 = AXIS2_PLACEMENT_3D ( 'NONE', #59155, #77932, #40658 ) ; +#35489 = CONICAL_SURFACE ( 'NONE', #5377, 10.50000000000009600, 0.7853981633974500600 ) ; +#35490 = ORIENTED_EDGE ( 'NONE', *, *, #80501, .F. ) ; +#35491 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 54.33333333333334300, -8.133761268305512700 ) ) ; +#35492 = AXIS2_PLACEMENT_3D ( 'NONE', #5595, #49076, #11862 ) ; +#35494 = VERTEX_POINT ( 'NONE', #28780 ) ; +#35493 = EDGE_CURVE ( 'NONE', #1293, #54555, #55744, .T. ) ; +#35495 = EDGE_CURVE ( 'NONE', #59629, #15056, #2371, .T. ) ; +#35496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17376, #4853, #48610, #11398 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.696657692344220000E-016, 0.001179148174667349000 ), + .UNSPECIFIED. ) ; +#35497 = EDGE_CURVE ( 'NONE', #69303, #33110, #41290, .T. ) ; +#35498 = VERTEX_POINT ( 'NONE', #60022 ) ; +#35499 = ADVANCED_FACE ( 'NONE', ( #29671 ), #44176, .F. ) ; +#35500 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492351800, 68.56055603621139500, -28.70555803803001300 ) ) ; +#35501 = VERTEX_POINT ( 'NONE', #23014 ) ; +#35502 = CIRCLE ( 'NONE', #24207, 10.50000000000009600 ) ; +#35503 = ORIENTED_EDGE ( 'NONE', *, *, #62497, .F. ) ; +#35504 = AXIS2_PLACEMENT_3D ( 'NONE', #62715, #6661, #19184 ) ; +#35505 = ORIENTED_EDGE ( 'NONE', *, *, #6866, .F. ) ; +#35506 = FACE_OUTER_BOUND ( 'NONE', #34361, .T. ) ; +#35507 = FACE_OUTER_BOUND ( 'NONE', #58222, .T. ) ; +#35508 = ORIENTED_EDGE ( 'NONE', *, *, #59409, .F. ) ; +#35509 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35510 = VERTEX_POINT ( 'NONE', #60294 ) ; +#35511 = EDGE_CURVE ( 'NONE', #53626, #61057, #16995, .T. ) ; +#35512 = ORIENTED_EDGE ( 'NONE', *, *, #54871, .F. ) ; +#35513 = ADVANCED_FACE ( 'NONE', ( #64712 ), #75372, .F. ) ; +#35514 = AXIS2_PLACEMENT_3D ( 'NONE', #71508, #77747, #15484 ) ; +#35515 = AXIS2_PLACEMENT_3D ( 'NONE', #67157, #11136, #23648 ) ; +#35516 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35517 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180756500, 79.94924284854684500, -28.20555803802997700 ) ) ; +#35518 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965400, 39.15930907398619400, -28.35186440610857500 ) ) ; +#35519 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.23796787468685200, -28.38801640354855100 ) ) ; +#35520 = CARTESIAN_POINT ( 'NONE', ( -16.10512553857337200, 19.54666532841804700, -28.65803483468210500 ) ) ; +#35521 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 25.66666666666667500, 4.294441961969993400 ) ) ; +#35522 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#35523 = FACE_OUTER_BOUND ( 'NONE', #66019, .T. ) ; +#35524 = VERTEX_POINT ( 'NONE', #17030 ) ; +#35525 = PLANE ( 'NONE', #27364 ) ; +#35526 = CONICAL_SURFACE ( 'NONE', #55486, 10.00000000000009400, 0.7853981633974447300 ) ; +#35527 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180654400, 61.65075715145295700, -28.20555803803014100 ) ) ; +#35528 = ORIENTED_EDGE ( 'NONE', *, *, #45335, .F. ) ; +#35529 = ADVANCED_FACE ( 'NONE', ( #46144 ), #42250, .T. ) ; +#35530 = VERTEX_POINT ( 'NONE', #73061 ) ; +#35531 = ORIENTED_EDGE ( 'NONE', *, *, #40433, .F. ) ; +#35532 = VERTEX_POINT ( 'NONE', #79310 ) ; +#35533 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145308900, 59.73198281203412600, -28.34169759783695900 ) ) ; +#35534 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#35535 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35537 = ADVANCED_FACE ( 'NONE', ( #13109 ), #9152, .T. ) ; +#35536 = ORIENTED_EDGE ( 'NONE', *, *, #53577, .T. ) ; +#35538 = CONICAL_SURFACE ( 'NONE', #7389, 10.00000000000009400, 0.7853981633974447300 ) ; +#35539 = VERTEX_POINT ( 'NONE', #11041 ) ; +#35540 = AXIS2_PLACEMENT_3D ( 'NONE', #57086, #19820, #63355 ) ; +#35541 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#35542 = ORIENTED_EDGE ( 'NONE', *, *, #68836, .F. ) ; +#35543 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56269, #19007, #75060, #37765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904732859400E-007, 0.0005865296644889182300 ), + .UNSPECIFIED. ) ; +#35544 = ADVANCED_FACE ( 'NONE', ( #11158 ), #56872, .F. ) ; +#35545 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338531900, 28.49322649091134400, -28.30799595738868700 ) ) ; +#35546 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999961800, 79.63176086632792300, -28.70555803802997700 ) ) ; +#35547 = ORIENTED_EDGE ( 'NONE', *, *, #73014, .T. ) ; +#35548 = ORIENTED_EDGE ( 'NONE', *, *, #9738, .F. ) ; +#35549 = AXIS2_PLACEMENT_3D ( 'NONE', #74866, #23998, #37562 ) ; +#35550 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#35551 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 60.16666666666666400, 0.1341879241256129200 ) ) ; +#35552 = CARTESIAN_POINT ( 'NONE', ( 19.85875255392922200, 0.2824948921419213100, -21.14446223635266300 ) ) ; +#35553 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#35554 = ORIENTED_EDGE ( 'NONE', *, *, #71429, .T. ) ; +#35555 = LINE ( 'NONE', #74641, #52038 ) ; +#35556 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9545, #41094, #59887, #22606 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722413562300E-007, 0.0002592600401783426800 ), + .UNSPECIFIED. ) ; +#35557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35558 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883996500, 49.70564881207732100, -28.41114655922342500 ) ) ; +#35559 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650754300, 50.20543520232829600, -28.70555803802996700 ) ) ; +#35560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35561 = AXIS2_PLACEMENT_3D ( 'NONE', #42028, #79587, #29859 ) ; +#35562 = CARTESIAN_POINT ( 'NONE', ( 5.060928057032967300, 10.00000000000003700, -28.70555803802998100 ) ) ; +#35563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35564 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#35565 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35566 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 30.74660241562181500, -28.20555803802995200 ) ) ; +#35567 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 67.94142842854297700, -28.20555803802997700 ) ) ; +#35568 = AXIS2_PLACEMENT_3D ( 'NONE', #66207, #16427, #22681 ) ; +#35569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35570 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#35571 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35572 = ORIENTED_EDGE ( 'NONE', *, *, #55190, .F. ) ; +#35573 = CONICAL_SURFACE ( 'NONE', #33272, 10.00000000000009200, 0.7853981633974447300 ) ; +#35574 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 81.25732391202370800, -28.20555803803030800 ) ) ; +#35575 = CARTESIAN_POINT ( 'NONE', ( -14.89966555183968600, 60.79999999999999000, -28.20555803802989900 ) ) ; +#35576 = ORIENTED_EDGE ( 'NONE', *, *, #8814, .T. ) ; +#35577 = CIRCLE ( 'NONE', #62537, 10.00000000000009200 ) ; +#35578 = CONICAL_SURFACE ( 'NONE', #51177, 10.50000000000009600, 0.7853981633974482800 ) ; +#35580 = EDGE_CURVE ( 'NONE', #35524, #38513, #26845, .T. ) ; +#35579 = ORIENTED_EDGE ( 'NONE', *, *, #31438, .T. ) ; +#35581 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35582 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 66.50000000000001400, -9.258116921287651700 ) ) ; +#35583 = EDGE_CURVE ( 'NONE', #19662, #73022, #77312, .T. ) ; +#35584 = FACE_OUTER_BOUND ( 'NONE', #75201, .T. ) ; +#35585 = ORIENTED_EDGE ( 'NONE', *, *, #34037, .F. ) ; +#35586 = ORIENTED_EDGE ( 'NONE', *, *, #28474, .T. ) ; +#35587 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 31.66666666666667500, 3.124568980892192800 ) ) ; +#35588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35589 = EDGE_CURVE ( 'NONE', #70215, #33956, #12394, .T. ) ; +#35590 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42819, #80105, #55327, #18083 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750729900, 0.0007596411030278643700 ), + .UNSPECIFIED. ) ; +#35592 = CIRCLE ( 'NONE', #22265, 9.500000000000097700 ) ; +#35591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35593 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, -3.333333333333326800, 5.722645192245505700 ) ) ; +#35594 = EDGE_CURVE ( 'NONE', #10382, #46457, #78723, .T. ) ; +#35595 = CIRCLE ( 'NONE', #18458, 9.500000000000099500 ) ; +#35596 = ORIENTED_EDGE ( 'NONE', *, *, #60133, .T. ) ; +#35597 = EDGE_CURVE ( 'NONE', #59578, #26910, #64269, .T. ) ; +#35598 = VERTEX_POINT ( 'NONE', #67596 ) ; +#35599 = CARTESIAN_POINT ( 'NONE', ( -8.392770678299619600, 44.45000000000006700, -5.215615521943052000 ) ) ; +#35600 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35601 = ORIENTED_EDGE ( 'NONE', *, *, #45399, .T. ) ; +#35602 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 34.00000000000000700, -12.20555803803000200 ) ) ; +#35603 = VERTEX_POINT ( 'NONE', #73866 ) ; +#35604 = ORIENTED_EDGE ( 'NONE', *, *, #49001, .T. ) ; +#35605 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488136200, 89.60439022488338900, -28.70555803802997700 ) ) ; +#35606 = EDGE_LOOP ( 'NONE', ( #23211, #65586, #28319, #14413 ) ) ; +#35607 = CONICAL_SURFACE ( 'NONE', #71379, 10.00000000000009200, 0.7853981633974447300 ) ; +#35608 = ORIENTED_EDGE ( 'NONE', *, *, #66684, .T. ) ; +#35609 = AXIS2_PLACEMENT_3D ( 'NONE', #53760, #60573, #41768 ) ; +#35610 = EDGE_CURVE ( 'NONE', #50891, #45862, #60794, .T. ) ; +#35611 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709903200, 49.56267502090536700, -28.41043597897461800 ) ) ; +#35612 = EDGE_CURVE ( 'NONE', #33097, #25229, #49728, .T. ) ; +#35613 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#35614 = EDGE_CURVE ( 'NONE', #122, #69297, #25756, .T. ) ; +#35615 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35616 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35617 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 29.75227248018355700, -28.70555803802998100 ) ) ; +#35618 = CARTESIAN_POINT ( 'NONE', ( 23.50567235401594600, 5.747365669740493600, -23.97236457831487800 ) ) ; +#35619 = FACE_OUTER_BOUND ( 'NONE', #65964, .T. ) ; +#35620 = AXIS2_PLACEMENT_3D ( 'NONE', #32299, #75801, #38503 ) ; +#35621 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609194100, 35.68533208989812500, -28.53910738522647600 ) ) ; +#35622 = CARTESIAN_POINT ( 'NONE', ( -9.198586935028780300, 94.72249899919931700, -28.20555803802997700 ) ) ; +#35623 = ORIENTED_EDGE ( 'NONE', *, *, #77157, .F. ) ; +#35624 = CONICAL_SURFACE ( 'NONE', #36101, 10.00000000000009200, 0.7853981633974447300 ) ; +#35625 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898059600, 39.38105266879264100, -28.33409528117009300 ) ) ; +#35626 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13314, #69316, #7279, #50786 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#35627 = CARTESIAN_POINT ( 'NONE', ( 19.97982364054003700, 101.5599023948819300, -19.74072083322734300 ) ) ; +#35628 = ADVANCED_FACE ( 'NONE', ( #73433 ), #54917, .T. ) ; +#35629 = AXIS2_PLACEMENT_3D ( 'NONE', #79824, #42534, #5289 ) ; +#35630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35631 = AXIS2_PLACEMENT_3D ( 'NONE', #44517, #7284, #50789 ) ; +#35632 = ADVANCED_FACE ( 'NONE', ( #27707 ), #12110, .T. ) ; +#35633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35634 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#35635 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#35636 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, 69.97246552159074900, -28.38801640354893200 ) ) ; +#35637 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 37.50000000000001400, 4.650848422521012700 ) ) ; +#35638 = CIRCLE ( 'NONE', #6340, 10.00000000000009200 ) ; +#35639 = PLANE ( 'NONE', #75660 ) ; +#35640 = CYLINDRICAL_SURFACE ( 'NONE', #12389, 10.00000000000000000 ) ; +#35641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35642 = EDGE_LOOP ( 'NONE', ( #31458, #19580, #48673, #44527 ) ) ; +#35643 = FACE_OUTER_BOUND ( 'NONE', #62205, .T. ) ; +#35644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35646 = AXIS2_PLACEMENT_3D ( 'NONE', #80422, #43134, #5895 ) ; +#35647 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343277900, 49.85339758437807900, -28.20555803802996700 ) ) ; +#35648 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655593200, 49.42298334620760900, -28.20555803802997400 ) ) ; +#35649 = CARTESIAN_POINT ( 'NONE', ( -9.462171640175595800, 57.14999999999999900, -1.435379768804188700 ) ) ; +#35650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35651 = EDGE_LOOP ( 'NONE', ( #47587, #5721, #33474, #75024, #68621, #13819, #53966 ) ) ; +#35652 = ADVANCED_FACE ( 'NONE', ( #58808 ), #5282, .F. ) ; +#35653 = FACE_OUTER_BOUND ( 'NONE', #60560, .T. ) ; +#35654 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803803001300 ) ) ; +#35655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35656 = CONICAL_SURFACE ( 'NONE', #22533, 10.50000000000009600, 0.7853981633974518300 ) ; +#35657 = ORIENTED_EDGE ( 'NONE', *, *, #15446, .T. ) ; +#35658 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552800, 61.49769010897077900, -28.61774594594320900 ) ) ; +#35659 = EDGE_CURVE ( 'NONE', #70927, #24389, #21834, .T. ) ; +#35660 = CARTESIAN_POINT ( 'NONE', ( -22.81292617491768500, 6.093536956551146100, -24.94723488262745500 ) ) ; +#35661 = AXIS2_PLACEMENT_3D ( 'NONE', #3909, #9906, #28723 ) ; +#35663 = VERTEX_POINT ( 'NONE', #6115 ) ; +#35662 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 75.67652461701985100, -28.70555803803014400 ) ) ; +#35664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35665 = ORIENTED_EDGE ( 'NONE', *, *, #64276, .T. ) ; +#35666 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 73.65857157145681800, -28.20555803803047800 ) ) ; +#35667 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35668 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 77.60073525436762100, -28.70555803803007700 ) ) ; +#35669 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46385, #65242, #71454, #34201 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972908994056700E-007, 0.0005865296644898753600 ), + .UNSPECIFIED. ) ; +#35670 = CONICAL_SURFACE ( 'NONE', #45442, 10.50000000000009800, 0.7853981633974500600 ) ; +#35671 = ORIENTED_EDGE ( 'NONE', *, *, #23573, .F. ) ; +#35672 = AXIS2_PLACEMENT_3D ( 'NONE', #79660, #23652, #36159 ) ; +#35673 = ORIENTED_EDGE ( 'NONE', *, *, #29379, .T. ) ; +#35674 = ORIENTED_EDGE ( 'NONE', *, *, #78747, .T. ) ; +#35675 = VERTEX_POINT ( 'NONE', #49582 ) ; +#35676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35677 = CIRCLE ( 'NONE', #32865, 10.50000000000009600 ) ; +#35678 = CIRCLE ( 'NONE', #74924, 10.50000000000009600 ) ; +#35679 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 6.000000000000004400, -1.205558038030002800 ) ) ; +#35680 = ORIENTED_EDGE ( 'NONE', *, *, #44128, .T. ) ; +#35681 = AXIS2_PLACEMENT_3D ( 'NONE', #67054, #61081, #36043 ) ; +#35682 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609424100, 51.46283204837338600, -28.48697406221667800 ) ) ; +#35683 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.16666666666668600, -3.349151577478988200 ) ) ; +#35684 = EDGE_LOOP ( 'NONE', ( #42174, #37021, #66188, #55607 ) ) ; +#35685 = CIRCLE ( 'NONE', #44493, 10.00000000000009600 ) ; +#35686 = ORIENTED_EDGE ( 'NONE', *, *, #31325, .F. ) ; +#35687 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35688 = EDGE_CURVE ( 'NONE', #65351, #78128, #38340, .T. ) ; +#35689 = ORIENTED_EDGE ( 'NONE', *, *, #51852, .T. ) ; +#35690 = CARTESIAN_POINT ( 'NONE', ( 3.935444260775300400, 70.09037803491490600, -28.29483400905890600 ) ) ; +#35691 = CONICAL_SURFACE ( 'NONE', #69914, 10.50000000000009600, 0.7853981633974500600 ) ; +#35692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35693 = CONICAL_SURFACE ( 'NONE', #28326, 10.50000000000009800, 0.7853981633974518300 ) ; +#35694 = ORIENTED_EDGE ( 'NONE', *, *, #47247, .T. ) ; +#35695 = ADVANCED_FACE ( 'NONE', ( #71473 ), #19890, .T. ) ; +#35696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35697 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 25.72261628933269900, -28.70555803802994200 ) ) ; +#35698 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747327900, 18.13131911501848800, -28.51286550264574200 ) ) ; +#35699 = EDGE_CURVE ( 'NONE', #58204, #55227, #35343, .T. ) ; +#35700 = EDGE_CURVE ( 'NONE', #28772, #8719, #40306, .T. ) ; +#35701 = CIRCLE ( 'NONE', #79262, 10.50000000000009600 ) ; +#35702 = EDGE_LOOP ( 'NONE', ( #41488, #45136, #14298, #8720 ) ) ; +#35703 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922525700, 81.50962196508467600, -28.29483400905911900 ) ) ; +#35704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35705 = FACE_OUTER_BOUND ( 'NONE', #20544, .T. ) ; +#35706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35707 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686917200, 71.58005252438303500, -28.24986299608925200 ) ) ; +#35708 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54562, #79327, #35801, #60843 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418781233401400E-007, 0.0002745453538439332700 ), + .UNSPECIFIED. ) ; +#35709 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35710 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136756400, 79.92958814301768200, -28.27321389036166700 ) ) ; +#35712 = VERTEX_POINT ( 'NONE', #68661 ) ; +#35711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35713 = ADVANCED_FACE ( 'NONE', ( #7207 ), #31415, .T. ) ; +#35714 = FACE_OUTER_BOUND ( 'NONE', #23268, .T. ) ; +#35715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35716 = AXIS2_PLACEMENT_3D ( 'NONE', #27112, #8573, #8304 ) ; +#35717 = EDGE_CURVE ( 'NONE', #50347, #77015, #69505, .T. ) ; +#35718 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195753600, 38.00972971738994500, -28.70555803802996000 ) ) ; +#35719 = EDGE_CURVE ( 'NONE', #69283, #17938, #20861, .T. ) ; +#35720 = ORIENTED_EDGE ( 'NONE', *, *, #13585, .T. ) ; +#35721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35722 = EDGE_CURVE ( 'NONE', #30431, #75377, #52950, .T. ) ; +#35723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35725 = FACE_OUTER_BOUND ( 'NONE', #55843, .T. ) ; +#35726 = AXIS2_PLACEMENT_3D ( 'NONE', #19638, #63170, #25907 ) ; +#35727 = FACE_OUTER_BOUND ( 'NONE', #40111, .T. ) ; +#35728 = ORIENTED_EDGE ( 'NONE', *, *, #10583, .T. ) ; +#35729 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182100, 28.63131911501876900, -28.51286550264508100 ) ) ; +#35730 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#35731 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, 91.25227248018352100, -28.70555803802999500 ) ) ; +#35732 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 49.23827450271716800, -28.47230003642277300 ) ) ; +#35733 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 90.13716795162659400, -28.48697406221657500 ) ) ; +#35734 = EDGE_LOOP ( 'NONE', ( #60340, #38557, #26488 ) ) ; +#35735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35736 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #43646, #37398 ) ; +#35737 = CARTESIAN_POINT ( 'NONE', ( -3.160449548281049300, 51.13768531620325300, -28.37082013777818500 ) ) ; +#35738 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#35739 = AXIS2_PLACEMENT_3D ( 'NONE', #74777, #37469, #238 ) ; +#35740 = CARTESIAN_POINT ( 'NONE', ( 2.487278546917083500, 51.47860033657563900, -28.56001054660900400 ) ) ; +#35741 = CARTESIAN_POINT ( 'NONE', ( 4.230811753656584400, 80.94994472024590900, -28.43636979168697800 ) ) ; +#35742 = ADVANCED_FACE ( 'NONE', ( #23795 ), #1356, .F. ) ; +#35743 = CONICAL_SURFACE ( 'NONE', #12627, 10.50000000000009600, 0.7853981633974500600 ) ; +#35744 = ORIENTED_EDGE ( 'NONE', *, *, #17828, .T. ) ; +#35745 = EDGE_LOOP ( 'NONE', ( #28902, #33245, #754, #79548, #20018 ) ) ; +#35746 = ORIENTED_EDGE ( 'NONE', *, *, #78161, .F. ) ; +#35747 = ORIENTED_EDGE ( 'NONE', *, *, #52756, .T. ) ; +#35748 = CIRCLE ( 'NONE', #48933, 10.00000000000009200 ) ; +#35749 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 52.16666666666666400, 6.794441961969992500 ) ) ; +#35750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35751 = AXIS2_PLACEMENT_3D ( 'NONE', #23214, #66738, #29504 ) ; +#35752 = ORIENTED_EDGE ( 'NONE', *, *, #38325, .T. ) ; +#35753 = EDGE_CURVE ( 'NONE', #67880, #43258, #34491, .T. ) ; +#35754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35756 = CARTESIAN_POINT ( 'NONE', ( -16.62994320778227900, 30.11224493817486400, -28.57183245893611100 ) ) ; +#35757 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33620, #27661, #46350, #9103 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885671829717000E-007, 0.0003940053330073065800 ), + .UNSPECIFIED. ) ; +#35758 = CONICAL_SURFACE ( 'NONE', #53355, 10.50000000000009800, 0.7853981633974500600 ) ; +#35759 = EDGE_LOOP ( 'NONE', ( #8225, #4527, #43188, #35928, #7383, #5404 ) ) ; +#35760 = VERTEX_POINT ( 'NONE', #38156 ) ; +#35762 = EDGE_CURVE ( 'NONE', #79214, #11747, #3310, .T. ) ; +#35761 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25182, #62453, #74961, #37659, #404, #43910 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082188300, 0.004114855318164376500 ), + .UNSPECIFIED. ) ; +#35763 = ORIENTED_EDGE ( 'NONE', *, *, #42349, .T. ) ; +#35764 = AXIS2_PLACEMENT_3D ( 'NONE', #10638, #62721, #25462 ) ; +#35765 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35766 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43415, #68181, #74720, #37417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438863791200E-007, 0.0007763347809200384300 ), + .UNSPECIFIED. ) ; +#35767 = CONICAL_SURFACE ( 'NONE', #7880, 10.50000000000009600, 0.7853981633974500600 ) ; +#35768 = PLANE ( 'NONE', #27294 ) ; +#35769 = VERTEX_POINT ( 'NONE', #7158 ) ; +#35770 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372570600, 87.93535825203869600, -28.53896444442243300 ) ) ; +#35771 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35773 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 23.50000000000001100, -9.258116921287651700 ) ) ; +#35774 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77447, #40173, #15437, #58944 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671438463100E-007, 0.0007670610367941802000 ), + .UNSPECIFIED. ) ; +#35775 = CARTESIAN_POINT ( 'NONE', ( 3.839550451718974200, 60.46231468379703200, -28.37082013777847000 ) ) ; +#35776 = AXIS2_PLACEMENT_3D ( 'NONE', #57139, #19884, #63414 ) ; +#35777 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 51.62753447840886200, -28.38801640354855800 ) ) ; +#35778 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35779 = CONICAL_SURFACE ( 'NONE', #75549, 10.00000000000009200, 0.7853981633974447300 ) ; +#35780 = ORIENTED_EDGE ( 'NONE', *, *, #55927, .T. ) ; +#35781 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35782 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047300, 80.29722425778764700, -28.32715733700501900 ) ) ; +#35783 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285890300, 77.92318720225479500, -28.70555803803030800 ) ) ; +#35784 = CIRCLE ( 'NONE', #18046, 10.50000000000009600 ) ; +#35785 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35786 = AXIS2_PLACEMENT_3D ( 'NONE', #20953, #14945, #58467 ) ; +#35787 = ORIENTED_EDGE ( 'NONE', *, *, #45200, .F. ) ; +#35788 = ADVANCED_FACE ( 'NONE', ( #67570 ), #25971, .T. ) ; +#35789 = CARTESIAN_POINT ( 'NONE', ( -20.15766577437019800, 101.5981352707135800, -18.92853111650401500 ) ) ; +#35790 = CARTESIAN_POINT ( 'NONE', ( 17.03177803894773100, 60.28233213024646600, -28.25051428653852200 ) ) ; +#35791 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#35792 = EDGE_CURVE ( 'NONE', #4221, #3718, #6383, .T. ) ; +#35793 = CONICAL_SURFACE ( 'NONE', #5699, 10.50000000000009800, 0.7853981633974518300 ) ; +#35794 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 58.00000000000002100, -1.205558038030002800 ) ) ; +#35795 = ORIENTED_EDGE ( 'NONE', *, *, #2562, .T. ) ; +#35796 = CARTESIAN_POINT ( 'NONE', ( 22.16360899856030600, 2.836391001439845500, -25.93569519633415900 ) ) ; +#35797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35799 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#35800 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#35801 = CARTESIAN_POINT ( 'NONE', ( -3.959729345560815800, 49.72438272935919900, -28.30310183417010000 ) ) ; +#35802 = ORIENTED_EDGE ( 'NONE', *, *, #44228, .F. ) ; +#35803 = ADVANCED_FACE ( 'NONE', ( #65632 ), #80214, .T. ) ; +#35804 = CARTESIAN_POINT ( 'NONE', ( 17.03178561562191700, 81.31767869357311400, -28.25052235028461600 ) ) ; +#35805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35806 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148611600, 36.00238095238080400, -28.70555803802995200 ) ) ; +#35807 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955600, 51.49747404049692500, -28.26641963845899900 ) ) ; +#35808 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 43.99926474563212500, -28.70555803802997700 ) ) ; +#35809 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67872, #11850, #24359, #30637 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553807710900E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#35810 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658257200, 20.44848545219035400, -28.67627428870437000 ) ) ; +#35811 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 59.63176086632793700, -28.70555803802997700 ) ) ; +#35812 = FACE_OUTER_BOUND ( 'NONE', #59424, .T. ) ; +#35813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35814 = FACE_OUTER_BOUND ( 'NONE', #70659, .T. ) ; +#35815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35816 = VERTEX_POINT ( 'NONE', #75977 ) ; +#35817 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35820 = EDGE_CURVE ( 'NONE', #46310, #44565, #72729, .T. ) ; +#35819 = ORIENTED_EDGE ( 'NONE', *, *, #51866, .T. ) ; +#35821 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456209800, 61.52472935029896200, -28.39317435246121200 ) ) ; +#35822 = ORIENTED_EDGE ( 'NONE', *, *, #52851, .T. ) ; +#35823 = ADVANCED_FACE ( 'NONE', ( #49027 ), #47078, .F. ) ; +#35824 = ORIENTED_EDGE ( 'NONE', *, *, #19984, .T. ) ; +#35825 = VERTEX_POINT ( 'NONE', #69979 ) ; +#35826 = AXIS2_PLACEMENT_3D ( 'NONE', #8723, #52227, #15006 ) ; +#35827 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#35828 = VERTEX_POINT ( 'NONE', #32728 ) ; +#35829 = EDGE_CURVE ( 'NONE', #42291, #18178, #36411, .T. ) ; +#35830 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948466500, 60.58127875436122900, -28.53757464917609700 ) ) ; +#35831 = ADVANCED_FACE ( 'NONE', ( #63686 ), #78279, .T. ) ; +#35832 = EDGE_CURVE ( 'NONE', #52976, #25396, #14031, .T. ) ; +#35833 = CONICAL_SURFACE ( 'NONE', #36059, 10.00000000000009600, 0.7853981633974482800 ) ; +#35834 = AXIS2_PLACEMENT_3D ( 'NONE', #54284, #17052, #60571 ) ; +#35836 = ORIENTED_EDGE ( 'NONE', *, *, #51897, .F. ) ; +#35835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35837 = CARTESIAN_POINT ( 'NONE', ( 9.530136888809634500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#35838 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 64.33333333333334300, 4.294441961970000500 ) ) ; +#35839 = EDGE_LOOP ( 'NONE', ( #21390, #19355, #24066 ) ) ; +#35840 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35841 = FACE_OUTER_BOUND ( 'NONE', #74099, .T. ) ; +#35842 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 29.50000000000001800, -4.865812075874393000 ) ) ; +#35843 = AXIS2_PLACEMENT_3D ( 'NONE', #20862, #27120, #45552 ) ; +#35844 = AXIS2_PLACEMENT_3D ( 'NONE', #29678, #54115, #66915 ) ; +#35845 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#35847 = ORIENTED_EDGE ( 'NONE', *, *, #66983, .F. ) ; +#35846 = EDGE_CURVE ( 'NONE', #5963, #7682, #50977, .T. ) ; +#35848 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171147300, 40.29999999999999000, -28.57107744631858600 ) ) ; +#35849 = EDGE_CURVE ( 'NONE', #27170, #46910, #30592, .T. ) ; +#35850 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019277900, 84.80000000000008200, -28.70555803802997700 ) ) ; +#35851 = AXIS2_PLACEMENT_3D ( 'NONE', #26318, #69793, #32538 ) ; +#35852 = FACE_OUTER_BOUND ( 'NONE', #68893, .T. ) ; +#35853 = ORIENTED_EDGE ( 'NONE', *, *, #863, .T. ) ; +#35854 = CARTESIAN_POINT ( 'NONE', ( -8.261962014097727900, 44.45000000000001000, 1.837066747103734700 ) ) ; +#35855 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507543800, 50.20543520232829600, -28.70555803802996700 ) ) ; +#35856 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 31.83333333333334300, 9.794441961969999600 ) ) ; +#35857 = EDGE_LOOP ( 'NONE', ( #57181, #30467, #14505, #12512, #33731 ) ) ; +#35858 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471817200, 18.13131911501876200, -28.51286550264506700 ) ) ; +#35859 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35860 = VERTEX_POINT ( 'NONE', #45461 ) ; +#35861 = EDGE_CURVE ( 'NONE', #38080, #10423, #58240, .T. ) ; +#35862 = AXIS2_PLACEMENT_3D ( 'NONE', #71377, #34115, #77620 ) ; +#35863 = AXIS2_PLACEMENT_3D ( 'NONE', #42342, #5098, #48585 ) ; +#35864 = CARTESIAN_POINT ( 'NONE', ( 16.02235059838247700, 50.55000000000000400, -28.65316072681825700 ) ) ; +#35865 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 51.52858243452104100, -28.70555803802997700 ) ) ; +#35866 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#35867 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35868 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890721900, 28.97143078992715500, -28.37063977681165700 ) ) ; +#35869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35622, #72876, #4590, #48078, #10862, #54353, #17116, #60646 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.589900327696125400E-017, 0.001725689008354397800, 0.002588533512531588900, 0.003451378016708779900 ), + .UNSPECIFIED. ) ; +#35870 = CARTESIAN_POINT ( 'NONE', ( 20.75825688776928500, 7.120992334569461200, -26.88268007550967900 ) ) ; +#35871 = CYLINDRICAL_SURFACE ( 'NONE', #60419, 10.00000000000000200 ) ; +#35872 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#35873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35874 = ORIENTED_EDGE ( 'NONE', *, *, #49860, .F. ) ; +#35875 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#35876 = ORIENTED_EDGE ( 'NONE', *, *, #74456, .T. ) ; +#35877 = CARTESIAN_POINT ( 'NONE', ( 19.14792989901544800, 99.89595466048305600, -24.29228987266672500 ) ) ; +#35878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35879 = CARTESIAN_POINT ( 'NONE', ( -3.132146184890725500, 49.97143078992715500, -28.37063977681168200 ) ) ; +#35880 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35881 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64932, #2865, #21667, #65203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760841053200, 0.0007596411030281088600 ), + .UNSPECIFIED. ) ; +#35882 = ADVANCED_FACE ( 'NONE', ( #32521 ), #76292, .F. ) ; +#35883 = FACE_OUTER_BOUND ( 'NONE', #19995, .T. ) ; +#35884 = VERTEX_POINT ( 'NONE', #58287 ) ; +#35885 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35886 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#35887 = FACE_OUTER_BOUND ( 'NONE', #49649, .T. ) ; +#35888 = AXIS2_PLACEMENT_3D ( 'NONE', #24889, #68397, #31158 ) ; +#35889 = VERTEX_POINT ( 'NONE', #21047 ) ; +#35890 = ORIENTED_EDGE ( 'NONE', *, *, #46154, .T. ) ; +#35891 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 35.33333333333334300, -8.133761268305512700 ) ) ; +#35892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35893 = ORIENTED_EDGE ( 'NONE', *, *, #64696, .F. ) ; +#35894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35895 = FACE_OUTER_BOUND ( 'NONE', #62483, .T. ) ; +#35896 = ORIENTED_EDGE ( 'NONE', *, *, #64083, .T. ) ; +#35897 = ORIENTED_EDGE ( 'NONE', *, *, #77493, .F. ) ; +#35899 = EDGE_LOOP ( 'NONE', ( #32955, #68672, #23918 ) ) ; +#35898 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 31.06248377813450300, -28.32723995587591400 ) ) ; +#35900 = ORIENTED_EDGE ( 'NONE', *, *, #31557, .F. ) ; +#35901 = ORIENTED_EDGE ( 'NONE', *, *, #40700, .F. ) ; +#35902 = CARTESIAN_POINT ( 'NONE', ( -3.976832725519376900, 28.58088969930748700, -28.30223898143226100 ) ) ; +#35903 = ADVANCED_FACE ( 'NONE', ( #17934 ), #43196, .F. ) ; +#35904 = AXIS2_PLACEMENT_3D ( 'NONE', #63324, #50474, #38243 ) ; +#35906 = ORIENTED_EDGE ( 'NONE', *, *, #45545, .F. ) ; +#35905 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805682500, 15.68572799237470300, -28.67630847257079200 ) ) ; +#35907 = CARTESIAN_POINT ( 'NONE', ( -6.682182065435729800, 57.14999999999998400, -7.951174287919824800 ) ) ; +#35908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65214, #58912, #2880, #27952 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565729524493700E-007, 0.0006649316450224829200 ), + .UNSPECIFIED. ) ; +#35910 = EDGE_CURVE ( 'NONE', #49739, #36509, #43746, .T. ) ; +#35911 = VERTEX_POINT ( 'NONE', #57752 ) ; +#35912 = CIRCLE ( 'NONE', #40683, 10.00000000000009400 ) ; +#35913 = ORIENTED_EDGE ( 'NONE', *, *, #78352, .F. ) ; +#35914 = CARTESIAN_POINT ( 'NONE', ( -4.561825084090867400, 41.48385710212512100, -28.57719681746179000 ) ) ; +#35915 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 70.34267608797553400, -28.20555803803047800 ) ) ; +#35916 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35917 = ORIENTED_EDGE ( 'NONE', *, *, #49235, .T. ) ; +#35918 = ORIENTED_EDGE ( 'NONE', *, *, #58954, .F. ) ; +#35919 = ADVANCED_FACE ( 'NONE', ( #59784 ), #10131, .T. ) ; +#35920 = ORIENTED_EDGE ( 'NONE', *, *, #12854, .T. ) ; +#35921 = FACE_OUTER_BOUND ( 'NONE', #25448, .T. ) ; +#35922 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#35923 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35924 = ORIENTED_EDGE ( 'NONE', *, *, #55949, .F. ) ; +#35925 = ADVANCED_FACE ( 'NONE', ( #28673 ), #57812, .F. ) ; +#35926 = EDGE_CURVE ( 'NONE', #34642, #9389, #74378, .T. ) ; +#35927 = FACE_OUTER_BOUND ( 'NONE', #69898, .T. ) ; +#35928 = ORIENTED_EDGE ( 'NONE', *, *, #58580, .F. ) ; +#35929 = EDGE_CURVE ( 'NONE', #19349, #71510, #45112, .T. ) ; +#35930 = ORIENTED_EDGE ( 'NONE', *, *, #51909, .F. ) ; +#35931 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701896400, 65.79999999999988300, -28.70555803803014400 ) ) ; +#35932 = ORIENTED_EDGE ( 'NONE', *, *, #71195, .F. ) ; +#35933 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 3.833333333333335300, -2.545304000185615800 ) ) ; +#35934 = CARTESIAN_POINT ( 'NONE', ( -15.85159581709215700, 10.16410593582545400, -28.68054222049887200 ) ) ; +#35935 = EDGE_CURVE ( 'NONE', #12332, #13513, #29373, .T. ) ; +#35936 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54968, #11484, #67488, #31358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099546579760600E-007, 0.0008759529789575333600 ), + .UNSPECIFIED. ) ; +#35937 = CARTESIAN_POINT ( 'NONE', ( -4.720904428264002900, 61.50050415885242200, -28.63287458792237700 ) ) ; +#35938 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 44.00000000000002100, -1.205558038030005300 ) ) ; +#35939 = EDGE_CURVE ( 'NONE', #73484, #19506, #14860, .T. ) ; +#35940 = AXIS2_PLACEMENT_3D ( 'NONE', #79789, #48734, #36256 ) ; +#35941 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 68.16545993132805800, -28.70555803803024400 ) ) ; +#35942 = CIRCLE ( 'NONE', #44132, 10.00000000000009200 ) ; +#35943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35944 = FACE_OUTER_BOUND ( 'NONE', #26766, .T. ) ; +#35945 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 9.166666666666685600, -3.349151577478988200 ) ) ; +#35946 = EDGE_LOOP ( 'NONE', ( #33077, #10277, #62371, #15293 ) ) ; +#35947 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 90.07141756547892400, -28.70555803802997700 ) ) ; +#35948 = ORIENTED_EDGE ( 'NONE', *, *, #34810, .T. ) ; +#35949 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#35950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35951 = ORIENTED_EDGE ( 'NONE', *, *, #56475, .T. ) ; +#35952 = AXIS2_PLACEMENT_3D ( 'NONE', #20957, #27216, #58187 ) ; +#35953 = EDGE_CURVE ( 'NONE', #1484, #13624, #61742, .T. ) ; +#35954 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873280300, 89.89196326503821400, -28.29033182162382700 ) ) ; +#35955 = EDGE_CURVE ( 'NONE', #30160, #24508, #380, .T. ) ; +#35956 = EDGE_CURVE ( 'NONE', #48654, #22471, #66736, .T. ) ; +#35958 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35957 = AXIS2_PLACEMENT_3D ( 'NONE', #28105, #71606, #34342 ) ; +#35959 = CONICAL_SURFACE ( 'NONE', #51864, 10.00000000000009200, 0.7853981633974447300 ) ; +#35960 = ORIENTED_EDGE ( 'NONE', *, *, #54064, .F. ) ; +#35961 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.87705528805138800, -28.20555803802996700 ) ) ; +#35962 = CONICAL_SURFACE ( 'NONE', #44735, 10.50000000000009200, 0.7853981633974482800 ) ; +#35963 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 81.07757630314203800, -28.53861367218593200 ) ) ; +#35964 = ORIENTED_EDGE ( 'NONE', *, *, #50027, .T. ) ; +#35965 = ORIENTED_EDGE ( 'NONE', *, *, #56391, .T. ) ; +#35966 = AXIS2_PLACEMENT_3D ( 'NONE', #41162, #28711, #3892 ) ; +#35967 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310450800, 18.10230989102908700, -28.61774594594334400 ) ) ; +#35968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#35969 = ORIENTED_EDGE ( 'NONE', *, *, #36649, .F. ) ; +#35970 = CIRCLE ( 'NONE', #11075, 9.500000000000097700 ) ; +#35971 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 81.65075715145215400, -28.20555803803047800 ) ) ; +#35972 = ORIENTED_EDGE ( 'NONE', *, *, #39739, .T. ) ; +#35973 = ORIENTED_EDGE ( 'NONE', *, *, #6916, .F. ) ; +#35974 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35976 = AXIS2_PLACEMENT_3D ( 'NONE', #25650, #19363, #69134 ) ; +#35977 = EDGE_LOOP ( 'NONE', ( #79546, #29652, #9576, #12899, #4287 ) ) ; +#35978 = ORIENTED_EDGE ( 'NONE', *, *, #53932, .F. ) ; +#35979 = EDGE_LOOP ( 'NONE', ( #77949, #6589, #27565 ) ) ; +#35980 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.36203212531315600, -28.38801640354855100 ) ) ; +#35981 = ORIENTED_EDGE ( 'NONE', *, *, #73491, .F. ) ; +#35982 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#35984 = ORIENTED_EDGE ( 'NONE', *, *, #7440, .F. ) ; +#35983 = EDGE_CURVE ( 'NONE', #2580, #56903, #12082, .T. ) ; +#35985 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35986 = AXIS2_PLACEMENT_3D ( 'NONE', #7142, #50646, #13446 ) ; +#35987 = AXIS2_PLACEMENT_3D ( 'NONE', #39124, #1866, #45363 ) ; +#35988 = ORIENTED_EDGE ( 'NONE', *, *, #2079, .T. ) ; +#35989 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#35990 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28536, #78557, #16520, #60056 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336188055199800E-007, 0.0006649560044135932600 ), + .UNSPECIFIED. ) ; +#35991 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091594100, 11.57425125164786900, -28.70555803803001300 ) ) ; +#35992 = CARTESIAN_POINT ( 'NONE', ( -15.05231272353724500, 55.84128927986391500, -28.70545447299020500 ) ) ; +#35993 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 71.65075715145216900, -28.20555803803047800 ) ) ; +#35994 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35995 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 33.39610994602603000, -28.37519436813182200 ) ) ; +#35996 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#35997 = FACE_OUTER_BOUND ( 'NONE', #9364, .T. ) ; +#35998 = ORIENTED_EDGE ( 'NONE', *, *, #13331, .F. ) ; +#35999 = EDGE_LOOP ( 'NONE', ( #45031, #23424, #27290 ) ) ; +#36000 = EDGE_LOOP ( 'NONE', ( #13057, #1157, #36862, #40604, #35508 ) ) ; +#36001 = ORIENTED_EDGE ( 'NONE', *, *, #59209, .F. ) ; +#36002 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80790, #56016, #74801, #37500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736129143100E-007, 0.0002745102201815917600 ), + .UNSPECIFIED. ) ; +#36003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36005 = CARTESIAN_POINT ( 'NONE', ( 1.851846210996577600, 75.79999999999998300, -28.37148172714593400 ) ) ; +#36006 = CIRCLE ( 'NONE', #55639, 10.00000000000009600 ) ; +#36007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36008 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36010 = EDGE_LOOP ( 'NONE', ( #50555, #38581, #54464 ) ) ; +#36011 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36012 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36013 = ORIENTED_EDGE ( 'NONE', *, *, #73390, .T. ) ; +#36014 = AXIS2_PLACEMENT_3D ( 'NONE', #52915, #3138, #21937 ) ; +#36015 = CONICAL_SURFACE ( 'NONE', #17078, 10.50000000000009600, 0.7853981633974500600 ) ; +#36016 = ORIENTED_EDGE ( 'NONE', *, *, #30716, .T. ) ; +#36017 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153682400, 70.79999999999998300, -28.55171188418376000 ) ) ; +#36018 = EDGE_LOOP ( 'NONE', ( #2860, #70295, #11361, #74916 ) ) ; +#36019 = ADVANCED_FACE ( 'NONE', ( #41256 ), #59369, .T. ) ; +#36020 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 50.00000000000000700, -9.205558038030005700 ) ) ; +#36021 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003400, 90.24722181384551300, -28.70555803803016200 ) ) ; +#36022 = AXIS2_PLACEMENT_3D ( 'NONE', #31677, #75188, #37900 ) ; +#36023 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614782900, 38.99322649091141800, -28.30799595738880800 ) ) ; +#36024 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36025 = ADVANCED_FACE ( 'NONE', ( #15984 ), #22778, .T. ) ; +#36026 = EDGE_CURVE ( 'NONE', #80788, #32323, #39292, .T. ) ; +#36027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36028 = CIRCLE ( 'NONE', #34431, 10.00000000000009200 ) ; +#36029 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36030 = ORIENTED_EDGE ( 'NONE', *, *, #2299, .F. ) ; +#36031 = ORIENTED_EDGE ( 'NONE', *, *, #30496, .F. ) ; +#36032 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#36033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36034 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#36035 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34474, #77988, #3438, #46940, #9712, #53218 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409477500, 0.003857515824818955100 ), + .UNSPECIFIED. ) ; +#36036 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36037 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 81.25732391202362200, -28.20555803803030800 ) ) ; +#36038 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 21.33333333333335000, 8.320721403598817300 ) ) ; +#36039 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36040 = FACE_OUTER_BOUND ( 'NONE', #27430, .T. ) ; +#36041 = ORIENTED_EDGE ( 'NONE', *, *, #72422, .F. ) ; +#36042 = VERTEX_POINT ( 'NONE', #72173 ) ; +#36043 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36044 = EDGE_CURVE ( 'NONE', #44748, #6922, #26690, .T. ) ; +#36045 = FACE_OUTER_BOUND ( 'NONE', #62200, .T. ) ; +#36046 = EDGE_CURVE ( 'NONE', #75531, #65275, #55839, .T. ) ; +#36047 = EDGE_LOOP ( 'NONE', ( #32086, #46990, #27014, #43136 ) ) ; +#36048 = EDGE_LOOP ( 'NONE', ( #51498, #36567, #3804 ) ) ; +#36049 = ORIENTED_EDGE ( 'NONE', *, *, #3283, .T. ) ; +#36050 = ORIENTED_EDGE ( 'NONE', *, *, #23832, .F. ) ; +#36051 = ORIENTED_EDGE ( 'NONE', *, *, #9087, .T. ) ; +#36052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36054 = EDGE_LOOP ( 'NONE', ( #12721, #49802, #11445, #63710, #30139, #61207 ) ) ; +#36055 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285565200, 53.67681279774481600, -28.70555803803030800 ) ) ; +#36056 = EDGE_CURVE ( 'NONE', #21805, #70673, #52221, .T. ) ; +#36057 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36058 = EDGE_CURVE ( 'NONE', #5323, #70223, #72430, .T. ) ; +#36060 = ORIENTED_EDGE ( 'NONE', *, *, #34034, .F. ) ; +#36059 = AXIS2_PLACEMENT_3D ( 'NONE', #80432, #49105, #43145 ) ; +#36061 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#36062 = CONICAL_SURFACE ( 'NONE', #4126, 10.50000000000009600, 0.7853981633974500600 ) ; +#36063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36064 = ORIENTED_EDGE ( 'NONE', *, *, #7302, .T. ) ; +#36065 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 55.83333333333334300, -2.545304000185615800 ) ) ; +#36066 = ORIENTED_EDGE ( 'NONE', *, *, #31288, .F. ) ; +#36067 = EDGE_CURVE ( 'NONE', #62498, #66318, #24722, .T. ) ; +#36068 = CARTESIAN_POINT ( 'NONE', ( 20.54877962962059400, 7.225610185189947500, -27.04757241308029200 ) ) ; +#36069 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.20037755566823300, -28.53664883431610000 ) ) ; +#36070 = ORIENTED_EDGE ( 'NONE', *, *, #1844, .T. ) ; +#36071 = ORIENTED_EDGE ( 'NONE', *, *, #21779, .F. ) ; +#36072 = ORIENTED_EDGE ( 'NONE', *, *, #46594, .T. ) ; +#36073 = ORIENTED_EDGE ( 'NONE', *, *, #59791, .F. ) ; +#36074 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049501400, 31.40771342879321900, -28.53891855579988100 ) ) ; +#36075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36076 = FACE_OUTER_BOUND ( 'NONE', #24832, .T. ) ; +#36077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36078 = CARTESIAN_POINT ( 'NONE', ( -15.89670794580928400, 32.23263087059572000, -28.67620115463453300 ) ) ; +#36079 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6437, #74978, #12981, #56465 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524586495300E-007, 0.0007303749718165169000 ), + .UNSPECIFIED. ) ; +#36080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36081 = AXIS2_PLACEMENT_3D ( 'NONE', #40536, #3263, #46767 ) ; +#36082 = EDGE_LOOP ( 'NONE', ( #14072, #752, #55503 ) ) ; +#36083 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459464700, 52.51973550835653300, -28.70555803803014100 ) ) ; +#36084 = EDGE_CURVE ( 'NONE', #6862, #31068, #6222, .T. ) ; +#36085 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841388800, 20.43650294695131500, -28.30782889147480900 ) ) ; +#36086 = EDGE_CURVE ( 'NONE', #28268, #24516, #70439, .T. ) ; +#36087 = EDGE_CURVE ( 'NONE', #38210, #4580, #53899, .T. ) ; +#36088 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#36089 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 60.58127875436078800, -28.53757464917570300 ) ) ; +#36090 = CARTESIAN_POINT ( 'NONE', ( 11.00202872172428300, 20.31091476818470900, -28.25432823872342800 ) ) ; +#36091 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#36092 = AXIS2_PLACEMENT_3D ( 'NONE', #5075, #67100, #42318 ) ; +#36093 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700200, 23.61903418172678600, -28.69431509262337700 ) ) ; +#36094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36095 = CIRCLE ( 'NONE', #30092, 9.500000000000099500 ) ; +#36096 = EDGE_LOOP ( 'NONE', ( #28080, #8081, #33107 ) ) ; +#36097 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10326, #1623, #20413, #63947 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716402700, 0.004080294652942915800 ), + .UNSPECIFIED. ) ; +#36098 = VERTEX_POINT ( 'NONE', #16931 ) ; +#36099 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36100 = EDGE_CURVE ( 'NONE', #64447, #12163, #8136, .T. ) ; +#36101 = AXIS2_PLACEMENT_3D ( 'NONE', #71524, #3225, #28041 ) ; +#36102 = AXIS2_PLACEMENT_3D ( 'NONE', #53144, #15889, #59423 ) ; +#36103 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999559900, 81.78933626866494000, -28.53923937255185800 ) ) ; +#36104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36105 = PLANE ( 'NONE', #28054 ) ; +#36106 = ADVANCED_FACE ( 'NONE', ( #37325 ), #2287, .T. ) ; +#36107 = CARTESIAN_POINT ( 'NONE', ( 11.46986311118992000, 9.146957350529865100, -28.66910751791844400 ) ) ; +#36108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36109 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 62.16666666666666400, -4.152999154772358800 ) ) ; +#36110 = ORIENTED_EDGE ( 'NONE', *, *, #6377, .F. ) ; +#36111 = ORIENTED_EDGE ( 'NONE', *, *, #7328, .F. ) ; +#36112 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36113 = ORIENTED_EDGE ( 'NONE', *, *, #44704, .T. ) ; +#36114 = ADVANCED_FACE ( 'NONE', ( #4267 ), #49964, .F. ) ; +#36115 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 27.33333333333333900, 1.294441961969997200 ) ) ; +#36116 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#36117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#36118 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54882, #11394, #23906, #67401, #30186, #73670 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 1.546338383594702500E-016, 0.001942186938636354000, 0.003884373877272553600 ), + .UNSPECIFIED. ) ; +#36119 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551100, 85.46616414991845500, -28.37247596307074800 ) ) ; +#36120 = CONICAL_SURFACE ( 'NONE', #79446, 10.50000000000009600, 0.7853981633974500600 ) ; +#36121 = AXIS2_PLACEMENT_3D ( 'NONE', #45830, #8581, #52082 ) ; +#36122 = ORIENTED_EDGE ( 'NONE', *, *, #8147, .F. ) ; +#36123 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609688800, 70.13716795162660800, -28.48697406221658900 ) ) ; +#36124 = ORIENTED_EDGE ( 'NONE', *, *, #25578, .F. ) ; +#36125 = CARTESIAN_POINT ( 'NONE', ( -6.129633642477899400, 44.45000000000002400, 4.023581091773267300 ) ) ; +#36126 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621800, 50.33106028708540700, -28.57333386111662300 ) ) ; +#36128 = EDGE_CURVE ( 'NONE', #71340, #2565, #20823, .T. ) ; +#36127 = ORIENTED_EDGE ( 'NONE', *, *, #33730, .F. ) ; +#36129 = CIRCLE ( 'NONE', #3656, 10.50000000000009600 ) ; +#36130 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 29.66666666666667100, -10.73183747965883100 ) ) ; +#36131 = ORIENTED_EDGE ( 'NONE', *, *, #60052, .F. ) ; +#36132 = AXIS2_PLACEMENT_3D ( 'NONE', #29456, #72942, #35676 ) ; +#36133 = EDGE_LOOP ( 'NONE', ( #28206, #9597, #47344 ) ) ; +#36134 = ORIENTED_EDGE ( 'NONE', *, *, #21238, .T. ) ; +#36135 = PLANE ( 'NONE', #50877 ) ; +#36136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36137 = EDGE_LOOP ( 'NONE', ( #52764, #17729, #76763, #17776 ) ) ; +#36138 = AXIS2_PLACEMENT_3D ( 'NONE', #6761, #37751, #13046 ) ; +#36139 = CIRCLE ( 'NONE', #33837, 10.00000000000009400 ) ; +#36140 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999969400, 59.63176086632793000, -28.70555803802997700 ) ) ; +#36141 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198451100, 80.90033558196108700, -28.70555803802997700 ) ) ; +#36142 = ADVANCED_FACE ( 'NONE', ( #68513 ), #30006, .T. ) ; +#36143 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47833, #60126, #48092, #10879 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.919124238417039900E-005, 0.0003659026359592292700 ), + .UNSPECIFIED. ) ; +#36144 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428613500, 67.92318720225486600, -28.70555803803047500 ) ) ; +#36145 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#36146 = CARTESIAN_POINT ( 'NONE', ( 17.24454976001801400, 8.877725119990993000, -28.45040264298925300 ) ) ; +#36147 = CONICAL_SURFACE ( 'NONE', #8744, 10.00000000000009200, 0.7853981633974447300 ) ; +#36148 = AXIS2_PLACEMENT_3D ( 'NONE', #13480, #19716, #50684 ) ; +#36149 = VERTEX_POINT ( 'NONE', #11486 ) ; +#36150 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801551600, 60.69966441803880700, -28.70555803803030800 ) ) ; +#36151 = ORIENTED_EDGE ( 'NONE', *, *, #46870, .T. ) ; +#36152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36153 = VERTEX_POINT ( 'NONE', #23731 ) ; +#36154 = ORIENTED_EDGE ( 'NONE', *, *, #77153, .T. ) ; +#36155 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36157 = CARTESIAN_POINT ( 'NONE', ( 17.87309312512676800, 97.34619732297535700, -26.88990322319475700 ) ) ; +#36158 = VERTEX_POINT ( 'NONE', #61268 ) ; +#36159 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36160 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533340100, 49.30869142985031300, -28.37223374938522000 ) ) ; +#36161 = FACE_OUTER_BOUND ( 'NONE', #57065, .T. ) ; +#36162 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484955900, 59.28967419478918500, -28.59353418718928100 ) ) ; +#36163 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 59.94924284854741400, -28.20555803802997700 ) ) ; +#36164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36165 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36166 = EDGE_CURVE ( 'NONE', #48902, #70786, #37772, .T. ) ; +#36167 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 33.16666666666667900, 6.794441961969992500 ) ) ; +#36168 = CIRCLE ( 'NONE', #5519, 10.00000000000009200 ) ; +#36169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36170 = ORIENTED_EDGE ( 'NONE', *, *, #44141, .F. ) ; +#36171 = EDGE_CURVE ( 'NONE', #21332, #38513, #18861, .T. ) ; +#36172 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59618, #47598, #4102, #60163 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572391251900E-007, 0.0004669842289003374700 ), + .UNSPECIFIED. ) ; +#36173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36174 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#36175 = CARTESIAN_POINT ( 'NONE', ( 1.690695031808205700, 57.14999999999978500, -10.34308713678984000 ) ) ; +#36176 = EDGE_CURVE ( 'NONE', #29509, #48654, #35437, .T. ) ; +#36177 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715851400, 55.79999999999976300, -28.70525300642641800 ) ) ; +#36178 = EDGE_CURVE ( 'NONE', #45918, #13305, #66559, .T. ) ; +#36179 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#36180 = EDGE_CURVE ( 'NONE', #22101, #45798, #23346, .T. ) ; +#36181 = ORIENTED_EDGE ( 'NONE', *, *, #50881, .T. ) ; +#36182 = VERTEX_POINT ( 'NONE', #36740 ) ; +#36183 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36184 = ORIENTED_EDGE ( 'NONE', *, *, #46857, .T. ) ; +#36185 = AXIS2_PLACEMENT_3D ( 'NONE', #13560, #57061, #19798 ) ; +#36186 = EDGE_CURVE ( 'NONE', #21452, #9324, #8829, .T. ) ; +#36187 = EDGE_CURVE ( 'NONE', #39538, #54616, #33455, .T. ) ; +#36188 = EDGE_CURVE ( 'NONE', #78578, #45253, #75191, .T. ) ; +#36189 = ADVANCED_FACE ( 'NONE', ( #64629 ), #79213, .T. ) ; +#36190 = CONICAL_SURFACE ( 'NONE', #71584, 10.00000000000009200, 0.7853981633974447300 ) ; +#36191 = EDGE_LOOP ( 'NONE', ( #48123, #8750, #39854, #27394 ) ) ; +#36192 = VERTEX_POINT ( 'NONE', #38371 ) ; +#36193 = AXIS2_PLACEMENT_3D ( 'NONE', #58082, #70586, #14570 ) ; +#36194 = CONICAL_SURFACE ( 'NONE', #51527, 10.50000000000009600, 0.7853981633974482800 ) ; +#36195 = ORIENTED_EDGE ( 'NONE', *, *, #49104, .T. ) ; +#36196 = ORIENTED_EDGE ( 'NONE', *, *, #31763, .T. ) ; +#36197 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 65.79999999999999700, -28.20555803802997700 ) ) ; +#36198 = VERTEX_POINT ( 'NONE', #7366 ) ; +#36199 = ADVANCED_FACE ( 'NONE', ( #31529 ), #13676, .T. ) ; +#36200 = AXIS2_PLACEMENT_3D ( 'NONE', #63295, #50728, #69514 ) ; +#36201 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 1.666666666666677200, 1.294441961969997200 ) ) ; +#36202 = EDGE_LOOP ( 'NONE', ( #53059, #31377, #7283 ) ) ; +#36203 = AXIS2_PLACEMENT_3D ( 'NONE', #16370, #59893, #22612 ) ; +#36204 = AXIS2_PLACEMENT_3D ( 'NONE', #11266, #4987, #73013 ) ; +#36205 = CIRCLE ( 'NONE', #46789, 10.50000000000009600 ) ; +#36206 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16607, #60139, #35401, #78911 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.081668171172168200E-017, 0.001333132141655308300 ), + .UNSPECIFIED. ) ; +#36207 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567153600, 20.24660241562189400, -28.20555803802994200 ) ) ; +#36208 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 41.83333333333332900, 0.9380355014189731800 ) ) ; +#36209 = EDGE_LOOP ( 'NONE', ( #74994, #52362, #37412, #48783 ) ) ; +#36210 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528154400, 9.968680884981225200, -28.51286550264508400 ) ) ; +#36211 = FACE_OUTER_BOUND ( 'NONE', #61954, .T. ) ; +#36212 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36213 = EDGE_LOOP ( 'NONE', ( #80778, #30310, #52586 ) ) ; +#36214 = ADVANCED_FACE ( 'NONE', ( #51910 ), #29599, .F. ) ; +#36215 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#36216 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36217 = VERTEX_POINT ( 'NONE', #32416 ) ; +#36218 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 7.000000000000006200, -1.205558038030005300 ) ) ; +#36219 = ORIENTED_EDGE ( 'NONE', *, *, #27283, .T. ) ; +#36220 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459539300, 59.08026449164331200, -28.70555803803006300 ) ) ; +#36221 = FACE_OUTER_BOUND ( 'NONE', #64013, .T. ) ; +#36222 = ORIENTED_EDGE ( 'NONE', *, *, #68095, .F. ) ; +#36223 = CARTESIAN_POINT ( 'NONE', ( 12.14815378900369900, 65.79999999999951400, -28.37148172714619700 ) ) ; +#36224 = CIRCLE ( 'NONE', #71139, 10.00000000000009200 ) ; +#36225 = AXIS2_PLACEMENT_3D ( 'NONE', #33664, #77185, #39919 ) ; +#36226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36227 = EDGE_CURVE ( 'NONE', #23233, #67444, #62657, .T. ) ; +#36228 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36230 = ADVANCED_FACE ( 'NONE', ( #346 ), #69666, .T. ) ; +#36231 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#36232 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467678100, 19.76893971292313200, -28.57333386111099900 ) ) ; +#36233 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.43250300240228500, -28.20555803802997700 ) ) ; +#36234 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853321600, 28.30869142985022100, -28.37223374938532000 ) ) ; +#36235 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534294900, 70.65007990305390700, -28.43638873268730200 ) ) ; +#36236 = FACE_OUTER_BOUND ( 'NONE', #69588, .T. ) ; +#36237 = ORIENTED_EDGE ( 'NONE', *, *, #13316, .F. ) ; +#36238 = EDGE_CURVE ( 'NONE', #44569, #78548, #60757, .T. ) ; +#36239 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 36.60073525436786900, -28.70555803802995200 ) ) ; +#36240 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36241 = AXIS2_PLACEMENT_3D ( 'NONE', #43625, #49873, #37110 ) ; +#36242 = PLANE ( 'NONE', #55267 ) ; +#36243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36244 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965575000, 41.67701665379186000, -28.20555803802996700 ) ) ; +#36245 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#36246 = CARTESIAN_POINT ( 'NONE', ( 16.37417643433616000, 92.92804471127679700, -28.61131985026917200 ) ) ; +#36247 = CARTESIAN_POINT ( 'NONE', ( -11.50207502155148700, 90.99854748491394200, -28.70555803802997700 ) ) ; +#36248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36250 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148417400, 13.09761904761919600, -28.70555803802992800 ) ) ; +#36251 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#36252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36253 = AXIS2_PLACEMENT_3D ( 'NONE', #42833, #5588, #49067 ) ; +#36254 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252813000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#36255 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#36256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36257 = ORIENTED_EDGE ( 'NONE', *, *, #6640, .F. ) ; +#36258 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32185, #25947, #7139, #75682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007679735311067964800 ), + .UNSPECIFIED. ) ; +#36259 = EDGE_LOOP ( 'NONE', ( #1148, #49436, #30928, #4459 ) ) ; +#36260 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567146500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#36261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36262 = AXIS2_PLACEMENT_3D ( 'NONE', #39305, #14840, #2297 ) ; +#36263 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36264 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274332500, 22.66464174796073300, -28.53896444442198500 ) ) ; +#36265 = FACE_OUTER_BOUND ( 'NONE', #10738, .T. ) ; +#36266 = ORIENTED_EDGE ( 'NONE', *, *, #69034, .T. ) ; +#36267 = CONICAL_SURFACE ( 'NONE', #25871, 10.00000000000009400, 0.7853981633974447300 ) ; +#36269 = EDGE_CURVE ( 'NONE', #56186, #59094, #46236, .T. ) ; +#36268 = ORIENTED_EDGE ( 'NONE', *, *, #12519, .T. ) ; +#36270 = CIRCLE ( 'NONE', #16837, 10.00000000000009400 ) ; +#36271 = PLANE ( 'NONE', #47159 ) ; +#36272 = EDGE_LOOP ( 'NONE', ( #56833, #48750, #76691, #32272 ) ) ; +#36273 = VERTEX_POINT ( 'NONE', #35019 ) ; +#36274 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 47.83333333333332100, 6.794441961969992500 ) ) ; +#36275 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#36276 = FACE_OUTER_BOUND ( 'NONE', #78657, .T. ) ; +#36277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36278 = ADVANCED_FACE ( 'NONE', ( #46072 ), #44098, .T. ) ; +#36279 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700000, 34.11903418172681800, -28.69431509262337700 ) ) ; +#36280 = EDGE_LOOP ( 'NONE', ( #66984, #64498, #77382, #71970, #45785, #18954, #12711 ) ) ; +#36281 = EDGE_CURVE ( 'NONE', #76613, #50034, #31830, .T. ) ; +#36282 = CIRCLE ( 'NONE', #18076, 10.50000000000022600 ) ; +#36283 = ORIENTED_EDGE ( 'NONE', *, *, #52782, .T. ) ; +#36284 = VERTEX_POINT ( 'NONE', #60306 ) ; +#36285 = ORIENTED_EDGE ( 'NONE', *, *, #20320, .T. ) ; +#36286 = FACE_OUTER_BOUND ( 'NONE', #41517, .T. ) ; +#36287 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905200, 84.83849307182669000, -28.68631150211663400 ) ) ; +#36288 = EDGE_LOOP ( 'NONE', ( #52085, #51951, #66194, #71993 ) ) ; +#36289 = CIRCLE ( 'NONE', #42412, 10.00000000000009200 ) ; +#36290 = ADVANCED_FACE ( 'NONE', ( #16924 ), #11078, .F. ) ; +#36291 = AXIS2_PLACEMENT_3D ( 'NONE', #23121, #72883, #79147 ) ; +#36292 = EDGE_CURVE ( 'NONE', #46812, #27666, #60715, .T. ) ; +#36293 = EDGE_CURVE ( 'NONE', #1835, #62031, #48020, .T. ) ; +#36294 = CARTESIAN_POINT ( 'NONE', ( 1.645813086125027700, 86.46717019299369200, -28.53914313452683200 ) ) ; +#36295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36296 = PLANE ( 'NONE', #75063 ) ; +#36297 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387501300, 76.46717019299461500, -28.53914313452728600 ) ) ; +#36298 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 19.16666666666667500, -12.20555803803000000 ) ) ; +#36299 = ORIENTED_EDGE ( 'NONE', *, *, #76631, .T. ) ; +#36300 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 101.5999999999999900, -18.70555803803001300 ) ) ; +#36301 = ORIENTED_EDGE ( 'NONE', *, *, #57396, .T. ) ; +#36302 = EDGE_CURVE ( 'NONE', #8073, #27811, #27629, .T. ) ; +#36303 = AXIS2_PLACEMENT_3D ( 'NONE', #9599, #65401, #46835 ) ; +#36304 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#36305 = FACE_OUTER_BOUND ( 'NONE', #5764, .T. ) ; +#36306 = ORIENTED_EDGE ( 'NONE', *, *, #32453, .T. ) ; +#36307 = ADVANCED_FACE ( 'NONE', ( #13036 ), #73359, .T. ) ; +#36308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72181, #28693, #66190, #28959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674897166400E-007, 0.0007987728781051773300 ), + .UNSPECIFIED. ) ; +#36309 = CIRCLE ( 'NONE', #27411, 10.00000000000009400 ) ; +#36310 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#36311 = CARTESIAN_POINT ( 'NONE', ( 3.064555739224939400, 60.09037803491490600, -28.29483400905883500 ) ) ; +#36312 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44793, #1316, #26380, #69857 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709392300, 0.0006599881756735032200 ), + .UNSPECIFIED. ) ; +#36313 = AXIS2_PLACEMENT_3D ( 'NONE', #12298, #55782, #18535 ) ; +#36314 = AXIS2_PLACEMENT_3D ( 'NONE', #27361, #27081, #77103 ) ; +#36315 = EDGE_CURVE ( 'NONE', #23276, #51553, #9072, .T. ) ; +#36316 = ADVANCED_FACE ( 'NONE', ( #58744 ), #23724, .T. ) ; +#36317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34560, #3515, #47021, #9798 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207975616800E-007, 0.0008724366121409723300 ), + .UNSPECIFIED. ) ; +#36319 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707773500, 49.43589406416700200, -28.68054222049974200 ) ) ; +#36320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36321 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 53.66666666666668600, 1.294441961969997200 ) ) ; +#36322 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36323 = ORIENTED_EDGE ( 'NONE', *, *, #8565, .F. ) ; +#36324 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 70.90050506338820900, -28.70555803802997700 ) ) ; +#36325 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274710500, 24.86787096422374800, -28.37244029424741900 ) ) ; +#36326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36327 = AXIS2_PLACEMENT_3D ( 'NONE', #25010, #68529, #31273 ) ; +#36328 = AXIS2_PLACEMENT_3D ( 'NONE', #2266, #45770, #8527 ) ; +#36329 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4719, #41988, #54509, #17255 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653070500 ), + .UNSPECIFIED. ) ; +#36331 = ORIENTED_EDGE ( 'NONE', *, *, #54664, .F. ) ; +#36332 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148538400, 36.00238095238092500, -28.70555803802995200 ) ) ; +#36333 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36334 = FACE_OUTER_BOUND ( 'NONE', #59645, .T. ) ; +#36335 = CARTESIAN_POINT ( 'NONE', ( 11.46986311118992000, 9.146957350529865100, -28.66910751791844400 ) ) ; +#36336 = ORIENTED_EDGE ( 'NONE', *, *, #25631, .F. ) ; +#36337 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#36338 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550024200, 89.83662311806180900, -28.37223523914888900 ) ) ; +#36339 = CIRCLE ( 'NONE', #38808, 10.00000000000009400 ) ; +#36340 = ORIENTED_EDGE ( 'NONE', *, *, #51117, .T. ) ; +#36341 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36342 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 28.66749699759768400, -28.20555803802994200 ) ) ; +#36343 = CIRCLE ( 'NONE', #73085, 10.00000000000009200 ) ; +#36344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36345 = AXIS2_PLACEMENT_3D ( 'NONE', #67376, #11360, #73103 ) ; +#36347 = ORIENTED_EDGE ( 'NONE', *, *, #49488, .F. ) ; +#36346 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36348 = ORIENTED_EDGE ( 'NONE', *, *, #67156, .F. ) ; +#36349 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#36350 = EDGE_LOOP ( 'NONE', ( #35235, #2645, #15836, #57375 ) ) ; +#36351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36352 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285718900, 73.67681279774498600, -28.70555803802997700 ) ) ; +#36353 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#36354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6439, #42582, #18943, #62473 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143679725000E-007, 0.0004559721418121067800 ), + .UNSPECIFIED. ) ; +#36355 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344350900, 31.17701665379241800, -28.20555803802996000 ) ) ; +#36356 = CIRCLE ( 'NONE', #20130, 10.50000000000009200 ) ; +#36357 = EDGE_LOOP ( 'NONE', ( #29169, #6277, #58389, #58996 ) ) ; +#36358 = AXIS2_PLACEMENT_3D ( 'NONE', #19048, #62573, #25332 ) ; +#36359 = LINE ( 'NONE', #52665, #42186 ) ; +#36360 = ORIENTED_EDGE ( 'NONE', *, *, #49724, .T. ) ; +#36361 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 60.00000000000001400, -1.205558038030002800 ) ) ; +#36362 = ORIENTED_EDGE ( 'NONE', *, *, #51602, .T. ) ; +#36363 = ORIENTED_EDGE ( 'NONE', *, *, #5193, .F. ) ; +#36364 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548987100, 18.15930907398587700, -28.35186440610879900 ) ) ; +#36365 = ORIENTED_EDGE ( 'NONE', *, *, #21769, .F. ) ; +#36366 = FACE_OUTER_BOUND ( 'NONE', #14882, .T. ) ; +#36367 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 25.16666666666666400, -2.545304000185620600 ) ) ; +#36368 = CARTESIAN_POINT ( 'NONE', ( -12.68596550977829900, 35.04999999999998300, -28.37321477197629000 ) ) ; +#36369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36371 = VERTEX_POINT ( 'NONE', #73334 ) ; +#36372 = EDGE_LOOP ( 'NONE', ( #4217, #57431, #45627, #73448, #50297 ) ) ; +#36373 = ORIENTED_EDGE ( 'NONE', *, *, #40922, .T. ) ; +#36374 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#36375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36376 = FACE_OUTER_BOUND ( 'NONE', #55390, .T. ) ; +#36377 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 27.50000000000000700, 6.847000845227646500 ) ) ; +#36378 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#36379 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 71.46283204837325800, -28.48697406221693700 ) ) ; +#36380 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670956800, 38.44136558227941000, -28.48677465922827100 ) ) ; +#36381 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000045300, 18.16749699759753200, -28.20555803803025800 ) ) ; +#36382 = CARTESIAN_POINT ( 'NONE', ( -16.33099763933876900, 23.97317079140168200, -28.62115403300391800 ) ) ; +#36383 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#36384 = CIRCLE ( 'NONE', #67472, 9.500000000000097700 ) ; +#36385 = ADVANCED_FACE ( 'NONE', ( #25678 ), #71390, .F. ) ; +#36386 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#36387 = EDGE_CURVE ( 'NONE', #73022, #6326, #17353, .T. ) ; +#36388 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 61.65075715145309900, -28.20555803802997700 ) ) ; +#36389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36390 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#36391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36393 = ORIENTED_EDGE ( 'NONE', *, *, #31269, .T. ) ; +#36392 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349246100, 19.89456479767167400, -28.70555803802994200 ) ) ; +#36394 = ADVANCED_FACE ( 'NONE', ( #7135 ), #54810, .T. ) ; +#36395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36396 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709865900, 10.03732497909436800, -28.41043597897465700 ) ) ; +#36397 = ORIENTED_EDGE ( 'NONE', *, *, #67931, .F. ) ; +#36398 = ADVANCED_FACE ( 'NONE', ( #77243 ), #21768, .F. ) ; +#36399 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576909000, 14.04999999999975700, -28.65220501466660300 ) ) ; +#36400 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686400, 31.17701665379241000, -28.20555803802996000 ) ) ; +#36401 = EDGE_CURVE ( 'NONE', #13352, #38012, #2868, .T. ) ; +#36402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57029, #13527, #69518, #32268 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678003494900, 0.0007670610367933436300 ), + .UNSPECIFIED. ) ; +#36403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36404 = FACE_OUTER_BOUND ( 'NONE', #48570, .T. ) ; +#36405 = VERTEX_POINT ( 'NONE', #48805 ) ; +#36406 = AXIS2_PLACEMENT_3D ( 'NONE', #58950, #21718, #65255 ) ; +#36407 = CONICAL_SURFACE ( 'NONE', #10139, 10.50000000000009600, 0.7853981633974500600 ) ; +#36408 = ORIENTED_EDGE ( 'NONE', *, *, #46336, .T. ) ; +#36409 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 31.00000000000001400, -9.205558038030005700 ) ) ; +#36410 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 73.99926474563206100, -28.70555803803007700 ) ) ; +#36411 = CIRCLE ( 'NONE', #77702, 10.50000000000009600 ) ; +#36412 = CONICAL_SURFACE ( 'NONE', #51762, 10.50000000000009600, 0.7853981633974500600 ) ; +#36413 = ORIENTED_EDGE ( 'NONE', *, *, #65418, .T. ) ; +#36414 = EDGE_LOOP ( 'NONE', ( #34071, #63216, #69200 ) ) ; +#36415 = ORIENTED_EDGE ( 'NONE', *, *, #35511, .T. ) ; +#36416 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36418 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #43866, #6636 ) ; +#36419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36420 = CARTESIAN_POINT ( 'NONE', ( 7.586347318202403900, 57.14999999999998400, -5.486634891386006400 ) ) ; +#36421 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25824, #63083, #75564, #38278 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735871631800E-007, 0.0008693051355035859000 ), + .UNSPECIFIED. ) ; +#36422 = EDGE_CURVE ( 'NONE', #35267, #10125, #69196, .T. ) ; +#36423 = EDGE_CURVE ( 'NONE', #998, #58595, #54733, .T. ) ; +#36425 = CONICAL_SURFACE ( 'NONE', #3910, 10.50000000000009600, 0.7853981633974500600 ) ; +#36424 = AXIS2_PLACEMENT_3D ( 'NONE', #18444, #43437, #24700 ) ; +#36426 = VERTEX_POINT ( 'NONE', #80117 ) ; +#36427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36428 = CONICAL_SURFACE ( 'NONE', #2322, 10.00000000000009200, 0.7853981633974447300 ) ; +#36429 = AXIS2_PLACEMENT_3D ( 'NONE', #27157, #70649, #33394 ) ; +#36430 = ORIENTED_EDGE ( 'NONE', *, *, #31201, .F. ) ; +#36431 = ORIENTED_EDGE ( 'NONE', *, *, #42615, .F. ) ; +#36433 = ORIENTED_EDGE ( 'NONE', *, *, #37450, .F. ) ; +#36432 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5940, #43168, #12197, #55677 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390015080500E-007, 0.0008082646680356970200 ), + .UNSPECIFIED. ) ; +#36434 = CARTESIAN_POINT ( 'NONE', ( -4.512589988549028600, 70.12140959736000000, -28.55996453402213900 ) ) ; +#36435 = ORIENTED_EDGE ( 'NONE', *, *, #74336, .F. ) ; +#36436 = AXIS2_PLACEMENT_3D ( 'NONE', #60064, #22781, #66307 ) ; +#36437 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997500, 48.91684396980712500, -28.70555803802996700 ) ) ; +#36438 = ORIENTED_EDGE ( 'NONE', *, *, #62340, .F. ) ; +#36439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36440 = EDGE_CURVE ( 'NONE', #71059, #9360, #42169, .T. ) ; +#36441 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36442 = CONICAL_SURFACE ( 'NONE', #51683, 10.50000000000009600, 0.7853981633974500600 ) ; +#36443 = AXIS2_PLACEMENT_3D ( 'NONE', #52418, #21203, #21468 ) ; +#36444 = AXIS2_PLACEMENT_3D ( 'NONE', #31145, #31407, #49849 ) ; +#36445 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36446 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70339, #64132, #76598, #39328 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.091337135425211100E-018, 0.001246264537621187300 ), + .UNSPECIFIED. ) ; +#36447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36448 = ORIENTED_EDGE ( 'NONE', *, *, #663, .T. ) ; +#36449 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 49.57141756547891700, -28.70555803802996700 ) ) ; +#36450 = ORIENTED_EDGE ( 'NONE', *, *, #50911, .F. ) ; +#36451 = VECTOR ( 'NONE', #53887, 1000.000000000000000 ) ; +#36452 = AXIS2_PLACEMENT_3D ( 'NONE', #35949, #42173, #73230 ) ; +#36453 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, -0.4999999999999870700, -4.865812075874393000 ) ) ; +#36454 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36455 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 39.66666666666667900, -5.205558038030003100 ) ) ; +#36456 = AXIS2_PLACEMENT_3D ( 'NONE', #52076, #14855, #58380 ) ; +#36457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36458 = CONICAL_SURFACE ( 'NONE', #41821, 10.00000000000009400, 0.7853981633974447300 ) ; +#36459 = CARTESIAN_POINT ( 'NONE', ( 4.266526781884032900, 18.20564881207730700, -28.41114655922341800 ) ) ; +#36460 = CARTESIAN_POINT ( 'NONE', ( 10.12141251450012900, 61.76337688193766700, -28.37223523914919800 ) ) ; +#36461 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 4.833333333333352600, 0.9380355014189731800 ) ) ; +#36462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36463 = ORIENTED_EDGE ( 'NONE', *, *, #26906, .T. ) ; +#36464 = FACE_OUTER_BOUND ( 'NONE', #52566, .T. ) ; +#36465 = AXIS2_PLACEMENT_3D ( 'NONE', #53839, #29145, #60121 ) ; +#36466 = ORIENTED_EDGE ( 'NONE', *, *, #52436, .F. ) ; +#36467 = CARTESIAN_POINT ( 'NONE', ( -9.487278546916906300, 71.47860033657565300, -28.56001054660905300 ) ) ; +#36468 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79745, #73494, #30011, #5217, #48701, #11492 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0003916983562638284500, 0.001136699028517851400, 0.001881699700771874700 ), + .UNSPECIFIED. ) ; +#36469 = ORIENTED_EDGE ( 'NONE', *, *, #44248, .T. ) ; +#36470 = ADVANCED_FACE ( 'NONE', ( #54835 ), #52880, .T. ) ; +#36471 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 60.51916201875669500, -28.45106778992438000 ) ) ; +#36472 = EDGE_CURVE ( 'NONE', #67971, #30084, #69427, .T. ) ; +#36473 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.68929190448939400, -28.20555803802997700 ) ) ; +#36474 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.66749699759768800, -28.20555803802994200 ) ) ; +#36475 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609406800, 71.46283204837340000, -28.48697406221669900 ) ) ; +#36476 = CONICAL_SURFACE ( 'NONE', #52607, 10.00000000000009400, 0.7853981633974447300 ) ; +#36477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36478 = CIRCLE ( 'NONE', #27312, 10.50000000000009600 ) ; +#36479 = EDGE_LOOP ( 'NONE', ( #73928, #49804, #72424 ) ) ; +#36480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36482 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#36483 = ORIENTED_EDGE ( 'NONE', *, *, #61083, .T. ) ; +#36484 = FACE_OUTER_BOUND ( 'NONE', #60367, .T. ) ; +#36485 = CARTESIAN_POINT ( 'NONE', ( -3.427738916792670400, 8.799999999999828400, -28.63329695482268300 ) ) ; +#36486 = ORIENTED_EDGE ( 'NONE', *, *, #17146, .F. ) ; +#36487 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894330600, 14.04999999999997600, -28.70555803802992800 ) ) ; +#36488 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .T. ) ; +#36489 = ADVANCED_FACE ( 'NONE', ( #5204 ), #3234, .F. ) ; +#36490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36491 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 80.16054007504433800, -28.34042301926905700 ) ) ; +#36492 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36493 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#36494 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#36495 = FACE_OUTER_BOUND ( 'NONE', #40941, .T. ) ; +#36496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36499 = ORIENTED_EDGE ( 'NONE', *, *, #38696, .T. ) ; +#36500 = CIRCLE ( 'NONE', #32028, 10.00000000000009400 ) ; +#36501 = EDGE_CURVE ( 'NONE', #66045, #49658, #19813, .T. ) ; +#36502 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36503 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#36504 = VERTEX_POINT ( 'NONE', #49601 ) ; +#36505 = CARTESIAN_POINT ( 'NONE', ( 15.12771242901986000, 9.866092851561594700, -28.70466362490903100 ) ) ; +#36506 = ORIENTED_EDGE ( 'NONE', *, *, #70124, .T. ) ; +#36507 = EDGE_CURVE ( 'NONE', #72435, #75712, #36343, .T. ) ; +#36508 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543113700, 51.36477483291890400, -28.27573853395004700 ) ) ; +#36509 = VERTEX_POINT ( 'NONE', #43365 ) ; +#36510 = ORIENTED_EDGE ( 'NONE', *, *, #66939, .F. ) ; +#36511 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#36512 = ORIENTED_EDGE ( 'NONE', *, *, #13082, .T. ) ; +#36513 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 53.65857157145694600, -28.20555803802997700 ) ) ; +#36514 = CONICAL_SURFACE ( 'NONE', #30763, 10.00000000000009600, 0.7853981633974482800 ) ; +#36515 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 41.67701665379185300, -28.20555803802996700 ) ) ; +#36516 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782548300, 90.16054007504448000, -28.34042301926905300 ) ) ; +#36517 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#36518 = ORIENTED_EDGE ( 'NONE', *, *, #24414, .F. ) ; +#36519 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36520 = EDGE_CURVE ( 'NONE', #17315, #54328, #40269, .T. ) ; +#36521 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 80.16054007504463600, -28.34042301926881500 ) ) ; +#36522 = ADVANCED_FACE ( 'NONE', ( #75299 ), #18897, .T. ) ; +#36523 = EDGE_CURVE ( 'NONE', #73343, #36741, #25844, .T. ) ; +#36524 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ; +#36525 = CIRCLE ( 'NONE', #28505, 9.500000000000099500 ) ; +#36526 = AXIS2_PLACEMENT_3D ( 'NONE', #53346, #22621, #65885 ) ; +#36527 = ORIENTED_EDGE ( 'NONE', *, *, #13581, .F. ) ; +#36528 = CONICAL_SURFACE ( 'NONE', #76225, 10.00000000000009200, 0.7853981633974415100 ) ; +#36529 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36530 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44756, #1270, #13822, #57319 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446462551400E-007, 0.0002745498510224182400 ), + .UNSPECIFIED. ) ; +#36531 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 45.66666666666667100, -8.133761268305512700 ) ) ; +#36532 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36533 = AXIS2_PLACEMENT_3D ( 'NONE', #24540, #68057, #30805 ) ; +#36534 = EDGE_CURVE ( 'NONE', #60268, #39400, #67485, .T. ) ; +#36535 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#36536 = EDGE_CURVE ( 'NONE', #7608, #19495, #56794, .T. ) ; +#36537 = EDGE_CURVE ( 'NONE', #74615, #35889, #11382, .T. ) ; +#36538 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 31.17701665379220800, -28.20555803802996000 ) ) ; +#36539 = CARTESIAN_POINT ( 'NONE', ( -9.997978530266227200, 49.78907435382948400, -28.25433648786267300 ) ) ; +#36540 = AXIS2_PLACEMENT_3D ( 'NONE', #44616, #50886, #13704 ) ; +#36541 = CIRCLE ( 'NONE', #25658, 10.00000000000009400 ) ; +#36542 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36543 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36544 = EDGE_CURVE ( 'NONE', #12422, #44639, #77677, .T. ) ; +#36545 = EDGE_LOOP ( 'NONE', ( #39308, #5746, #36813, #59157 ) ) ; +#36546 = FACE_OUTER_BOUND ( 'NONE', #37640, .T. ) ; +#36547 = AXIS2_PLACEMENT_3D ( 'NONE', #57822, #20566, #64104 ) ; +#36548 = AXIS2_PLACEMENT_3D ( 'NONE', #50487, #70396, #13024 ) ; +#36549 = ORIENTED_EDGE ( 'NONE', *, *, #22587, .T. ) ; +#36550 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36551 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72704, #78965, #16938, #60470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203489287046400E-007, 0.0008990233139251587500 ), + .UNSPECIFIED. ) ; +#36552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36553 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.737967874686777500, -28.38801640354855500 ) ) ; +#36554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36555 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 17.00000000000001800, 9.794441961969996100 ) ) ; +#36556 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#36557 = CIRCLE ( 'NONE', #53093, 10.00000000000009400 ) ; +#36558 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427200, 22.67681279774499400, -28.70555803802995200 ) ) ; +#36559 = CIRCLE ( 'NONE', #19422, 10.50000000000009600 ) ; +#36560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36561 = ORIENTED_EDGE ( 'NONE', *, *, #78285, .T. ) ; +#36562 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063465500, 10.09789380924872900, -28.25343951603342800 ) ) ; +#36563 = CONICAL_SURFACE ( 'NONE', #41139, 10.00000000000009200, 0.7853981633974447300 ) ; +#36564 = EDGE_LOOP ( 'NONE', ( #32913, #77019, #44117, #37870 ) ) ; +#36565 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36566 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#36567 = ORIENTED_EDGE ( 'NONE', *, *, #30927, .T. ) ; +#36568 = AXIS2_PLACEMENT_3D ( 'NONE', #38180, #50696, #7455 ) ; +#36569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3782, #10060, #66100, #28880 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799625124100E-007, 0.0005050252131284979100 ), + .UNSPECIFIED. ) ; +#36570 = CIRCLE ( 'NONE', #12870, 10.00000000000009400 ) ; +#36571 = ADVANCED_FACE ( 'NONE', ( #40233 ), #48953, .F. ) ; +#36572 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428597800, 49.57141756547894600, -28.70555803802996700 ) ) ; +#36574 = CIRCLE ( 'NONE', #34062, 9.500000000000095900 ) ; +#36573 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551028200, 48.50000000000000000, 4.650848422521008300 ) ) ; +#36575 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042484800, 32.09027028261001400, -28.70555803802994900 ) ) ; +#36576 = ORIENTED_EDGE ( 'NONE', *, *, #38419, .F. ) ; +#36577 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 51.50000000000001400, -4.865812075874393000 ) ) ; +#36578 = ORIENTED_EDGE ( 'NONE', *, *, #15929, .T. ) ; +#36579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36580 = EDGE_CURVE ( 'NONE', #7301, #8848, #1291, .T. ) ; +#36581 = EDGE_LOOP ( 'NONE', ( #64998, #3330, #19400, #829, #39727 ) ) ; +#36582 = ORIENTED_EDGE ( 'NONE', *, *, #23520, .F. ) ; +#36583 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 10.28933626866497300, -28.53923937255169500 ) ) ; +#36584 = AXIS2_PLACEMENT_3D ( 'NONE', #70059, #32798, #76316 ) ; +#36585 = ORIENTED_EDGE ( 'NONE', *, *, #28271, .F. ) ; +#36586 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36587 = CIRCLE ( 'NONE', #57896, 9.500000000000097700 ) ; +#36588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36589 = ADVANCED_FACE ( 'NONE', ( #17867 ), #80135, .F. ) ; +#36590 = CONICAL_SURFACE ( 'NONE', #14552, 10.50000000000009400, 0.7853981633974500600 ) ; +#36591 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36592 = AXIS2_PLACEMENT_3D ( 'NONE', #9875, #78155, #16137 ) ; +#36594 = ORIENTED_EDGE ( 'NONE', *, *, #6261, .T. ) ; +#36593 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36595 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36596 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#36597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36598 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#36599 = ORIENTED_EDGE ( 'NONE', *, *, #38854, .F. ) ; +#36600 = FACE_OUTER_BOUND ( 'NONE', #4207, .T. ) ; +#36601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36602 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973404500, 64.26498457889739800, -28.70555803803001600 ) ) ; +#36603 = AXIS2_PLACEMENT_3D ( 'NONE', #28607, #34839, #65841 ) ; +#36604 = ADVANCED_FACE ( 'NONE', ( #32441 ), #47008, .F. ) ; +#36605 = ORIENTED_EDGE ( 'NONE', *, *, #19780, .T. ) ; +#36606 = CONICAL_SURFACE ( 'NONE', #92, 10.50000000000009600, 0.7853981633974500600 ) ; +#36607 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492454500, 42.02620220503759200, -28.70555803802996700 ) ) ; +#36608 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16673, #22928, #66455, #72715 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716351100, 0.004080294652942879400 ), + .UNSPECIFIED. ) ; +#36609 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#36610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36611 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 80.69966441803890700, -28.70555803802997700 ) ) ; +#36612 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159368300, 19.19809558586064600, -28.70555803803001600 ) ) ; +#36613 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36615 = CARTESIAN_POINT ( 'NONE', ( 17.31587870724582200, 28.97683288890993600, -28.43418176890224600 ) ) ; +#36616 = VERTEX_POINT ( 'NONE', #1192 ) ; +#36617 = ADVANCED_FACE ( 'NONE', ( #34406 ), #13957, .F. ) ; +#36618 = EDGE_CURVE ( 'NONE', #53536, #51449, #30523, .T. ) ; +#36619 = CYLINDRICAL_SURFACE ( 'NONE', #34461, 7.500000000000000000 ) ; +#36621 = ORIENTED_EDGE ( 'NONE', *, *, #40589, .F. ) ; +#36620 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.49747404049738000, -28.26641963845862900 ) ) ; +#36622 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 57.83333333333333600, 1.741883078712340300 ) ) ; +#36623 = EDGE_CURVE ( 'NONE', #77229, #7540, #38265, .T. ) ; +#36624 = FACE_OUTER_BOUND ( 'NONE', #39844, .T. ) ; +#36625 = CARTESIAN_POINT ( 'NONE', ( 9.621978672527612600, 18.13131911501838900, -28.51286550264558900 ) ) ; +#36626 = VERTEX_POINT ( 'NONE', #26262 ) ; +#36627 = FACE_OUTER_BOUND ( 'NONE', #53492, .T. ) ; +#36628 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 23.00000000000000400, -1.205558038030002800 ) ) ; +#36629 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 34.73212903577628900, -28.37244029424740400 ) ) ; +#36630 = EDGE_CURVE ( 'NONE', #9664, #53914, #63239, .T. ) ; +#36631 = EDGE_LOOP ( 'NONE', ( #20984, #56495, #73687 ) ) ; +#36632 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#36633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36634 = CARTESIAN_POINT ( 'NONE', ( -2.198586935028918400, 94.72249899919880500, -28.20555803803014400 ) ) ; +#36635 = CONICAL_SURFACE ( 'NONE', #41081, 10.50000000000009600, 0.7853981633974500600 ) ; +#36636 = CONICAL_SURFACE ( 'NONE', #50613, 10.50000000000009800, 0.7853981633974500600 ) ; +#36637 = EDGE_CURVE ( 'NONE', #2521, #29236, #50896, .T. ) ; +#36638 = ORIENTED_EDGE ( 'NONE', *, *, #15586, .T. ) ; +#36639 = EDGE_CURVE ( 'NONE', #44641, #43398, #15901, .T. ) ; +#36640 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044600, 82.51973550835663200, -28.70555803802997400 ) ) ; +#36641 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 25.33333333333334300, -6.705558038030005700 ) ) ; +#36642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36643 = EDGE_LOOP ( 'NONE', ( #16578, #4649, #19579 ) ) ; +#36644 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300911100, 78.40378923506904100, -28.61864990621732500 ) ) ; +#36645 = ORIENTED_EDGE ( 'NONE', *, *, #47927, .F. ) ; +#36646 = AXIS2_PLACEMENT_3D ( 'NONE', #41678, #4428, #47917 ) ; +#36647 = EDGE_CURVE ( 'NONE', #70963, #40939, #65572, .T. ) ; +#36648 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465409300, 18.99920551340398900, -28.70555803802992800 ) ) ; +#36649 = EDGE_CURVE ( 'NONE', #38410, #3913, #78194, .T. ) ; +#36650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36651 = EDGE_CURVE ( 'NONE', #32815, #55167, #48727, .T. ) ; +#36652 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 14.05000000000000200, -28.20555803802992800 ) ) ; +#36653 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51124, #26459, #45143, #7909 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215299801600E-007, 0.0007606633682806919300 ), + .UNSPECIFIED. ) ; +#36654 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#36655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36656 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428634700, 80.07141756547881100, -28.70555803803014400 ) ) ; +#36657 = CONICAL_SURFACE ( 'NONE', #56940, 10.50000000000009600, 0.7853981633974500600 ) ; +#36658 = VERTEX_POINT ( 'NONE', #64052 ) ; +#36659 = AXIS2_PLACEMENT_3D ( 'NONE', #57793, #20543, #64073 ) ; +#36660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36661 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#36662 = EDGE_LOOP ( 'NONE', ( #70462, #14564, #29155, #16612 ) ) ; +#36663 = ORIENTED_EDGE ( 'NONE', *, *, #49974, .F. ) ; +#36664 = ORIENTED_EDGE ( 'NONE', *, *, #37530, .F. ) ; +#36665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36667 = ORIENTED_EDGE ( 'NONE', *, *, #10665, .T. ) ; +#36668 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 30.75489551879203300, -28.37193179497695900 ) ) ; +#36669 = PLANE ( 'NONE', #20881 ) ; +#36670 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36671 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#36672 = CONICAL_SURFACE ( 'NONE', #4167, 10.50000000000009600, 0.7853981633974500600 ) ; +#36673 = AXIS2_PLACEMENT_3D ( 'NONE', #41917, #23430, #60704 ) ; +#36674 = CARTESIAN_POINT ( 'NONE', ( -16.64092028683107200, 90.81678172719070100, -28.56462680123444300 ) ) ; +#36675 = AXIS2_PLACEMENT_3D ( 'NONE', #70045, #32786, #76301 ) ; +#36676 = ORIENTED_EDGE ( 'NONE', *, *, #53223, .T. ) ; +#36677 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100661700, 38.62363993080087700, -28.38670679782167700 ) ) ; +#36678 = AXIS2_PLACEMENT_3D ( 'NONE', #13329, #19568, #50531 ) ; +#36679 = ADVANCED_FACE ( 'NONE', ( #63611 ), #43129, .T. ) ; +#36680 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 77.46443389862717800, -28.54207364681943900 ) ) ; +#36681 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 70.34267608797567600, -28.20555803802997700 ) ) ; +#36682 = VERTEX_POINT ( 'NONE', #76798 ) ; +#36683 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100670600, 28.12363993080086600, -28.38670679782166700 ) ) ; +#36684 = CONICAL_SURFACE ( 'NONE', #72685, 10.00000000000009400, 0.7853981633974447300 ) ; +#36685 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 28.83333333333333900, 6.794441961969992500 ) ) ; +#36686 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052316600, 90.28233213024636000, -28.25051428653865000 ) ) ; +#36687 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 47.44142842854306300, -28.20555803802996700 ) ) ; +#36688 = VERTEX_POINT ( 'NONE', #39530 ) ; +#36689 = CONICAL_SURFACE ( 'NONE', #29821, 10.50000000000009600, 0.7853981633974482800 ) ; +#36690 = CONICAL_SURFACE ( 'NONE', #56372, 10.00000000000009200, 0.7853981633974447300 ) ; +#36691 = ADVANCED_FACE ( 'NONE', ( #45036 ), #10053, .F. ) ; +#36692 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883532800, 28.70564881207761900, -28.41114655922298100 ) ) ; +#36693 = AXIS2_PLACEMENT_3D ( 'NONE', #67245, #30023, #73503 ) ; +#36694 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36695 = CARTESIAN_POINT ( 'NONE', ( 7.806778718592750200, 57.14999999999989900, -3.082236884864949300 ) ) ; +#36696 = ORIENTED_EDGE ( 'NONE', *, *, #32372, .F. ) ; +#36697 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#36698 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36699 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120823800, 49.88098890548146600, -28.33427604305564200 ) ) ; +#36700 = CONICAL_SURFACE ( 'NONE', #18251, 10.00000000000009200, 0.7853981633974447300 ) ; +#36701 = ORIENTED_EDGE ( 'NONE', *, *, #28193, .T. ) ; +#36702 = ADVANCED_FACE ( 'NONE', ( #28591 ), #57726, .T. ) ; +#36703 = EDGE_CURVE ( 'NONE', #15594, #59571, #34308, .T. ) ; +#36704 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 49.66749699759768100, -28.20555803802996700 ) ) ; +#36705 = EDGE_LOOP ( 'NONE', ( #3977, #74033, #45436 ) ) ; +#36706 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34846, #66126, #47570, #10349 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082045437600E-007, 0.001076191670833090700 ), + .UNSPECIFIED. ) ; +#36707 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000063900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#36708 = EDGE_LOOP ( 'NONE', ( #51444, #67161, #1292 ) ) ; +#36709 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 16.62623792124937700, -28.70555803802992800 ) ) ; +#36710 = ORIENTED_EDGE ( 'NONE', *, *, #76419, .T. ) ; +#36711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36712 = CIRCLE ( 'NONE', #37302, 9.499999999999964500 ) ; +#36713 = CARTESIAN_POINT ( 'NONE', ( -1.266348137463069200E-013, 83.65857157145696000, -28.20555803803014400 ) ) ; +#36714 = ORIENTED_EDGE ( 'NONE', *, *, #49572, .F. ) ; +#36715 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428624000, 28.57141756547896300, -28.70555803802994200 ) ) ; +#36716 = ADVANCED_FACE ( 'NONE', ( #61666 ), #46035, .T. ) ; +#36717 = AXIS2_PLACEMENT_3D ( 'NONE', #23823, #67324, #30098 ) ; +#36718 = CIRCLE ( 'NONE', #6759, 10.00000000000009600 ) ; +#36719 = ORIENTED_EDGE ( 'NONE', *, *, #3633, .F. ) ; +#36720 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36721 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#36722 = ORIENTED_EDGE ( 'NONE', *, *, #14235, .T. ) ; +#36723 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, -2.666666666666660700, 3.124568980892187500 ) ) ; +#36724 = AXIS2_PLACEMENT_3D ( 'NONE', #66960, #29723, #73219 ) ; +#36725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36726 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 37.50000000000001400, 4.650848422521012700 ) ) ; +#36727 = CIRCLE ( 'NONE', #36436, 9.500000000000099500 ) ; +#36728 = FACE_OUTER_BOUND ( 'NONE', #77032, .T. ) ; +#36729 = ORIENTED_EDGE ( 'NONE', *, *, #40376, .T. ) ; +#36730 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#36731 = ORIENTED_EDGE ( 'NONE', *, *, #22613, .F. ) ; +#36732 = EDGE_CURVE ( 'NONE', #57210, #46628, #19845, .T. ) ; +#36733 = ORIENTED_EDGE ( 'NONE', *, *, #35953, .T. ) ; +#36734 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.62753447840889000, -28.38801640354855800 ) ) ; +#36735 = ORIENTED_EDGE ( 'NONE', *, *, #61681, .F. ) ; +#36736 = ORIENTED_EDGE ( 'NONE', *, *, #65666, .F. ) ; +#36737 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 2.666666666666678500, -5.205558038030003100 ) ) ; +#36738 = ORIENTED_EDGE ( 'NONE', *, *, #52678, .T. ) ; +#36739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36740 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148611600, 36.00238095238080400, -28.70555803802995200 ) ) ; +#36741 = VERTEX_POINT ( 'NONE', #52009 ) ; +#36742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36743 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4915, #4645, #54684, #17438 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259737495400E-007, 0.0004559721492006331500 ), + .UNSPECIFIED. ) ; +#36744 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 16.62623792124938400, -28.70555803802992800 ) ) ; +#36745 = CARTESIAN_POINT ( 'NONE', ( 9.343046065457414800, 79.08026449164026400, -28.70555803803160400 ) ) ; +#36746 = CIRCLE ( 'NONE', #80379, 10.00000000000009600 ) ; +#36747 = ORIENTED_EDGE ( 'NONE', *, *, #11317, .F. ) ; +#36748 = EDGE_CURVE ( 'NONE', #1821, #72475, #59704, .T. ) ; +#36750 = EDGE_CURVE ( 'NONE', #60591, #6854, #76220, .T. ) ; +#36749 = ORIENTED_EDGE ( 'NONE', *, *, #47701, .T. ) ; +#36751 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36752 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16361, #53610, #28911, #72405 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722413562300E-007, 0.0002592600401783426800 ), + .UNSPECIFIED. ) ; +#36753 = EDGE_LOOP ( 'NONE', ( #2212, #28312, #65236 ) ) ; +#36754 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 34.09761904761919700, -28.70555803802995200 ) ) ; +#36755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36756 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#36757 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36858, #74429, #68427, #31186, #74695, #37388 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003192800, 0.004118671204006385500 ), + .UNSPECIFIED. ) ; +#36758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36759 = FACE_OUTER_BOUND ( 'NONE', #65377, .T. ) ; +#36760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#36762 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853689300, 51.25732391202355800, -28.20555803803030800 ) ) ; +#36763 = AXIS2_PLACEMENT_3D ( 'NONE', #39537, #70548, #45484 ) ; +#36764 = EDGE_CURVE ( 'NONE', #31605, #30821, #74303, .T. ) ; +#36765 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.16749699759768800, -28.20555803802995200 ) ) ; +#36766 = EDGE_CURVE ( 'NONE', #60859, #74314, #12002, .T. ) ; +#36767 = EDGE_CURVE ( 'NONE', #12346, #66219, #41184, .T. ) ; +#36768 = ORIENTED_EDGE ( 'NONE', *, *, #3888, .T. ) ; +#36769 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.79999999999982700, -28.20555803803014400 ) ) ; +#36770 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 79.97246552159111800, -28.38801640354855100 ) ) ; +#36771 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37536, #74841, #43791, #6563 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019575038104900E-007, 0.0007596410370203616300 ), + .UNSPECIFIED. ) ; +#36772 = EDGE_CURVE ( 'NONE', #54124, #33477, #26622, .T. ) ; +#36773 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.61077422949657700, -28.37255355648634800 ) ) ; +#36774 = AXIS2_PLACEMENT_3D ( 'NONE', #19265, #43979, #25266 ) ; +#36775 = FACE_OUTER_BOUND ( 'NONE', #70322, .T. ) ; +#36776 = ORIENTED_EDGE ( 'NONE', *, *, #22883, .F. ) ; +#36777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36778 = VERTEX_POINT ( 'NONE', #77604 ) ; +#36779 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#36780 = FACE_OUTER_BOUND ( 'NONE', #58830, .T. ) ; +#36781 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36782 = AXIS2_PLACEMENT_3D ( 'NONE', #76896, #39629, #2343 ) ; +#36783 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454059400, 59.08026449164300000, -28.70555803803022200 ) ) ; +#36784 = CARTESIAN_POINT ( 'NONE', ( -17.36059854261446500, 49.66749699759768100, -28.25434854811490100 ) ) ; +#36785 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #68984, #12712 ) ; +#36786 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#36787 = CIRCLE ( 'NONE', #63022, 10.00000000000009400 ) ; +#36788 = ORIENTED_EDGE ( 'NONE', *, *, #76373, .F. ) ; +#36789 = ADVANCED_FACE ( 'NONE', ( #72360 ), #70363, .F. ) ; +#36790 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034900, 49.65930907398620800, -28.35186440610858900 ) ) ; +#36791 = VERTEX_POINT ( 'NONE', #65656 ) ; +#36792 = ADVANCED_FACE ( 'NONE', ( #8072 ), #37257, .F. ) ; +#36793 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 43.50000000000002800, 4.650848422521016300 ) ) ; +#36794 = VERTEX_POINT ( 'NONE', #40880 ) ; +#36795 = AXIS2_PLACEMENT_3D ( 'NONE', #66376, #29149, #72631 ) ; +#36796 = EDGE_CURVE ( 'NONE', #23333, #26934, #6145, .T. ) ; +#36797 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#36798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20405, #63938, #26669, #70153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405670491950400E-007, 0.0007670610367937889200 ), + .UNSPECIFIED. ) ; +#36799 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 41.35277818615431800, -28.70555803802999500 ) ) ; +#36800 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#36801 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 70.36203212531316400, -28.38801640354855800 ) ) ; +#36802 = ADVANCED_FACE ( 'NONE', ( #39208 ), #68430, .T. ) ; +#36803 = CIRCLE ( 'NONE', #74897, 10.00000000000009400 ) ; +#36804 = FACE_OUTER_BOUND ( 'NONE', #13291, .T. ) ; +#36805 = ORIENTED_EDGE ( 'NONE', *, *, #66231, .T. ) ; +#36806 = ORIENTED_EDGE ( 'NONE', *, *, #70480, .F. ) ; +#36807 = ORIENTED_EDGE ( 'NONE', *, *, #45911, .T. ) ; +#36808 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456184000, 60.07527064970104600, -28.39317435246126200 ) ) ; +#36809 = EDGE_CURVE ( 'NONE', #41798, #6729, #5375, .T. ) ; +#36810 = ORIENTED_EDGE ( 'NONE', *, *, #70705, .F. ) ; +#36811 = AXIS2_PLACEMENT_3D ( 'NONE', #57929, #45365, #26938 ) ; +#36812 = AXIS2_PLACEMENT_3D ( 'NONE', #3018, #46512, #9271 ) ; +#36813 = ORIENTED_EDGE ( 'NONE', *, *, #10373, .T. ) ; +#36814 = EDGE_LOOP ( 'NONE', ( #12883, #5362, #79085, #68308 ) ) ; +#36815 = ORIENTED_EDGE ( 'NONE', *, *, #40089, .T. ) ; +#36816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36817 = VERTEX_POINT ( 'NONE', #3601 ) ; +#36818 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#36819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36820 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 90.37705528805042800, -28.20555803803047800 ) ) ; +#36821 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 14.83333333333333200, -12.20555803803000600 ) ) ; +#36822 = CARTESIAN_POINT ( 'NONE', ( 2.254548258614907000, 18.09617684379240300, -28.64146614751487300 ) ) ; +#36823 = CONICAL_SURFACE ( 'NONE', #47449, 10.50000000000009600, 0.7853981633974500600 ) ; +#36824 = AXIS2_PLACEMENT_3D ( 'NONE', #58938, #9428, #52936 ) ; +#36825 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36826 = ORIENTED_EDGE ( 'NONE', *, *, #64563, .F. ) ; +#36827 = EDGE_LOOP ( 'NONE', ( #3935, #757, #58728 ) ) ; +#36828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36829 = ORIENTED_EDGE ( 'NONE', *, *, #20459, .T. ) ; +#36830 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#36831 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650641000, 49.58087956867520800, -28.30223257055574800 ) ) ; +#36832 = CARTESIAN_POINT ( 'NONE', ( -17.24297557446558200, 80.16517473503391500, -28.29551658696701800 ) ) ; +#36833 = CONICAL_SURFACE ( 'NONE', #42187, 10.00000000000009400, 0.7853981633974447300 ) ; +#36834 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#36835 = AXIS2_PLACEMENT_3D ( 'NONE', #77976, #28517, #72011 ) ; +#36836 = EDGE_LOOP ( 'NONE', ( #18265, #29675, #20197, #15060 ) ) ; +#36837 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999997300, 46.33333333333334300, -8.133761268305514500 ) ) ; +#36838 = EDGE_CURVE ( 'NONE', #25126, #56481, #4190, .T. ) ; +#36839 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 49.33333333333335700, 3.124568980892187500 ) ) ; +#36840 = CIRCLE ( 'NONE', #5146, 10.00000000000009200 ) ; +#36841 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455567000, 61.87833896172669800, -28.53892303408230200 ) ) ; +#36842 = ORIENTED_EDGE ( 'NONE', *, *, #73781, .F. ) ; +#36843 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36844 = EDGE_LOOP ( 'NONE', ( #12200, #596, #55403, #50211 ) ) ; +#36845 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.65857157145701000, -28.20555803802995200 ) ) ; +#36846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36848 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#36849 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 0.0000000000000000000, 16.29444196196998700 ) ) ; +#36850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36851 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.61077422949657000, -28.37255355648632000 ) ) ; +#36852 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269787300, 60.01262610361139600, -28.29936525552453500 ) ) ; +#36853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36854 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55344, #30641, #68138, #30891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083003128400E-007, 0.0003101809493108536800 ), + .UNSPECIFIED. ) ; +#36855 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36856 = EDGE_CURVE ( 'NONE', #5954, #71934, #71707, .T. ) ; +#36857 = FACE_OUTER_BOUND ( 'NONE', #21762, .T. ) ; +#36858 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535000, 55.79999999999999000, -28.63843632546336000 ) ) ; +#36859 = FACE_OUTER_BOUND ( 'NONE', #22704, .T. ) ; +#36860 = EDGE_CURVE ( 'NONE', #67444, #74017, #53827, .T. ) ; +#36861 = ORIENTED_EDGE ( 'NONE', *, *, #3281, .F. ) ; +#36862 = ORIENTED_EDGE ( 'NONE', *, *, #41828, .F. ) ; +#36863 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#36864 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819000, 28.63131911501876900, -28.51286550264507700 ) ) ; +#36865 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 19.25227248018356000, -28.70555803802997400 ) ) ; +#36866 = ORIENTED_EDGE ( 'NONE', *, *, #74567, .T. ) ; +#36867 = EDGE_CURVE ( 'NONE', #6766, #39289, #22703, .T. ) ; +#36868 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9125, #46370, #21690, #65229 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005484695251775850500, 0.006175442520169416800 ), + .UNSPECIFIED. ) ; +#36869 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 28.66749699759768400, -28.20555803802994200 ) ) ; +#36870 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857280700, 47.42318720225497900, -28.70555803802996700 ) ) ; +#36871 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36872 = ADVANCED_FACE ( 'NONE', ( #55767 ), #35193, .T. ) ; +#36873 = CONICAL_SURFACE ( 'NONE', #15458, 10.00000000000009200, 0.7853981633974447300 ) ; +#36875 = ORIENTED_EDGE ( 'NONE', *, *, #46967, .F. ) ; +#36874 = EDGE_CURVE ( 'NONE', #56579, #70590, #51838, .T. ) ; +#36876 = CONICAL_SURFACE ( 'NONE', #4169, 10.50000000000009200, 0.7853981633974482800 ) ; +#36877 = ORIENTED_EDGE ( 'NONE', *, *, #76436, .T. ) ; +#36878 = AXIS2_PLACEMENT_3D ( 'NONE', #47377, #72461, #22673 ) ; +#36879 = ORIENTED_EDGE ( 'NONE', *, *, #1888, .F. ) ; +#36880 = ORIENTED_EDGE ( 'NONE', *, *, #35753, .F. ) ; +#36881 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 55.66666666666667900, -6.705558038030000400 ) ) ; +#36882 = CONICAL_SURFACE ( 'NONE', #30398, 10.00000000000009600, 0.7853981633974482800 ) ; +#36883 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44148, #6932, #62983, #25731 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710160900, 0.0008082646680354865700 ), + .UNSPECIFIED. ) ; +#36884 = ORIENTED_EDGE ( 'NONE', *, *, #35493, .T. ) ; +#36885 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ; +#36886 = ORIENTED_EDGE ( 'NONE', *, *, #60610, .F. ) ; +#36888 = VERTEX_POINT ( 'NONE', #47911 ) ; +#36887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#36889 = ADVANCED_FACE ( 'NONE', ( #20746 ), #10688, .T. ) ; +#36890 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 20.83333333333333600, 0.1341879241256075400 ) ) ; +#36891 = ORIENTED_EDGE ( 'NONE', *, *, #19627, .F. ) ; +#36892 = AXIS2_PLACEMENT_3D ( 'NONE', #54564, #17302, #60844 ) ; +#36893 = PLANE ( 'NONE', #71113 ) ; +#36894 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19620, #69376, #75629, #38344 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354268447000E-007, 0.0004318366892334399600 ), + .UNSPECIFIED. ) ; +#36895 = EDGE_CURVE ( 'NONE', #46777, #18844, #18787, .T. ) ; +#36896 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36897 = EDGE_CURVE ( 'NONE', #40985, #76184, #57228, .T. ) ; +#36898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36899 = AXIS2_PLACEMENT_3D ( 'NONE', #65119, #27855, #71349 ) ; +#36900 = ORIENTED_EDGE ( 'NONE', *, *, #62517, .T. ) ; +#36901 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#36902 = CIRCLE ( 'NONE', #64679, 10.00000000000009200 ) ; +#36903 = EDGE_LOOP ( 'NONE', ( #28099, #9904, #2367 ) ) ; +#36904 = VERTEX_POINT ( 'NONE', #35971 ) ; +#36905 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972572500, 52.22511094383838100, -28.55192314908416400 ) ) ; +#36906 = ORIENTED_EDGE ( 'NONE', *, *, #60269, .F. ) ; +#36907 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 23.16666666666667100, 1.741883078712356500 ) ) ; +#36908 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 37.39962244433174000, -28.53664883431607900 ) ) ; +#36909 = ORIENTED_EDGE ( 'NONE', *, *, #42670, .T. ) ; +#36910 = VERTEX_POINT ( 'NONE', #73243 ) ; +#36911 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189881600, 10.47636006919877400, -28.38670679782159900 ) ) ; +#36912 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.418457393421038000, -28.68863412692833800 ) ) ; +#36913 = FACE_OUTER_BOUND ( 'NONE', #67511, .T. ) ; +#36914 = EDGE_CURVE ( 'NONE', #26103, #30007, #2216, .T. ) ; +#36915 = AXIS2_PLACEMENT_3D ( 'NONE', #45129, #50865, #7899 ) ; +#36916 = AXIS2_PLACEMENT_3D ( 'NONE', #5574, #49053, #11842 ) ; +#36917 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 90.10252595950235800, -28.26641963845891000 ) ) ; +#36918 = PLANE ( 'NONE', #39204 ) ; +#36919 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 14.05000000000000200, -28.20555803802992800 ) ) ; +#36921 = VERTEX_POINT ( 'NONE', #16947 ) ; +#36920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36922 = ADVANCED_FACE ( 'NONE', ( #24648 ), #64552, .T. ) ; +#36923 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362723500, 87.56528145730219100, -28.66119098264625700 ) ) ; +#36924 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36925 = CARTESIAN_POINT ( 'NONE', ( 11.56182508409089500, 20.48385710212512100, -28.57719681746176500 ) ) ; +#36926 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#36927 = CIRCLE ( 'NONE', #65587, 10.50000000000009600 ) ; +#36928 = VERTEX_POINT ( 'NONE', #30022 ) ; +#36929 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.65857157145701000, -28.20555803802995200 ) ) ; +#36930 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310457600, 28.60230989102909800, -28.61774594594333400 ) ) ; +#36931 = VERTEX_POINT ( 'NONE', #73501 ) ; +#36932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36933 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 71.82440674572720200, -28.45987523529583300 ) ) ; +#36934 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195365300, 10.41634594406191500, -28.35038903107271200 ) ) ; +#36935 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 61.96823913367206400, -28.70555803802997700 ) ) ; +#36936 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042462600, 38.00972971738994500, -28.70555803802996000 ) ) ; +#36937 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14869, #21146, #27404, #70890 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786123407200E-007, 0.0007677775503743802700 ), + .UNSPECIFIED. ) ; +#36938 = PLANE ( 'NONE', #26961 ) ; +#36939 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000036000, 80.69949493661177100, -28.70555803802997700 ) ) ; +#36940 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36941 = AXIS2_PLACEMENT_3D ( 'NONE', #4941, #48434, #11220 ) ; +#36942 = CONICAL_SURFACE ( 'NONE', #38920, 10.50000000000009800, 0.7853981633974518300 ) ; +#36943 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 26.66666666666667100, -8.133761268305512700 ) ) ; +#36944 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807148400, 56.79999999999998300, -28.70555803802997700 ) ) ; +#36945 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 62.31032580521099400, -28.59353418718932400 ) ) ; +#36946 = CIRCLE ( 'NONE', #20736, 9.500000000000097700 ) ; +#36947 = ORIENTED_EDGE ( 'NONE', *, *, #17858, .F. ) ; +#36948 = CARTESIAN_POINT ( 'NONE', ( 3.572261083207513000, 8.799999999999668500, -28.63329695482266100 ) ) ; +#36949 = AXIS2_PLACEMENT_3D ( 'NONE', #62443, #49879, #68688 ) ; +#36951 = ORIENTED_EDGE ( 'NONE', *, *, #14826, .F. ) ; +#36950 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#36952 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#36953 = EDGE_CURVE ( 'NONE', #42194, #23320, #42758, .T. ) ; +#36954 = CONICAL_SURFACE ( 'NONE', #80036, 10.50000000000009600, 0.7853981633974500600 ) ; +#36955 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36956 = ORIENTED_EDGE ( 'NONE', *, *, #22654, .F. ) ; +#36957 = CIRCLE ( 'NONE', #77079, 10.00000000000009600 ) ; +#36958 = ORIENTED_EDGE ( 'NONE', *, *, #60891, .F. ) ; +#36959 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629200, 90.80000000000001100, -28.55171188418377400 ) ) ; +#36960 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 30.72294471194860000, -28.20555803802996700 ) ) ; +#36961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36962 = CONICAL_SURFACE ( 'NONE', #47478, 10.00000000000009600, 0.7853981633974447300 ) ; +#36963 = EDGE_LOOP ( 'NONE', ( #18895, #41884, #29365, #42354 ) ) ; +#36964 = EDGE_LOOP ( 'NONE', ( #16009, #35318, #2107, #20107 ) ) ; +#36965 = VERTEX_POINT ( 'NONE', #17753 ) ; +#36966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36967 = ORIENTED_EDGE ( 'NONE', *, *, #45535, .T. ) ; +#36968 = ORIENTED_EDGE ( 'NONE', *, *, #10951, .F. ) ; +#36969 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260077900, 81.39965687931103800, -28.70555803803001300 ) ) ; +#36970 = ORIENTED_EDGE ( 'NONE', *, *, #40702, .T. ) ; +#36971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42740, #80029, #55253, #18012 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622851996800, 0.0009376791149930208200 ), + .UNSPECIFIED. ) ; +#36972 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36974 = ADVANCED_FACE ( 'NONE', ( #35367 ), #31455, .T. ) ; +#36975 = CONICAL_SURFACE ( 'NONE', #40103, 10.50000000000009600, 0.7853981633974518300 ) ; +#36977 = EDGE_CURVE ( 'NONE', #12788, #72435, #47945, .T. ) ; +#36976 = ORIENTED_EDGE ( 'NONE', *, *, #62896, .T. ) ; +#36978 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 41.24660241562189400, -28.20555803802996700 ) ) ; +#36979 = ORIENTED_EDGE ( 'NONE', *, *, #37758, .T. ) ; +#36980 = ORIENTED_EDGE ( 'NONE', *, *, #37574, .F. ) ; +#36982 = EDGE_CURVE ( 'NONE', #60512, #4794, #28362, .T. ) ; +#36981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71661, #9629, #28446, #71935 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720846358100E-007, 0.0002592600401777336300 ), + .UNSPECIFIED. ) ; +#36983 = ORIENTED_EDGE ( 'NONE', *, *, #37470, .T. ) ; +#36984 = VERTEX_POINT ( 'NONE', #24265 ) ; +#36985 = CIRCLE ( 'NONE', #33736, 10.50000000000009600 ) ; +#36986 = ADVANCED_FACE ( 'NONE', ( #16850 ), #62576, .F. ) ; +#36987 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 70.33333333333331400, -5.535685056952199400 ) ) ; +#36988 = VERTEX_POINT ( 'NONE', #74048 ) ; +#36989 = CARTESIAN_POINT ( 'NONE', ( -16.93949773756162000, 93.53949773756163200, -28.51567264113192500 ) ) ; +#36990 = EDGE_CURVE ( 'NONE', #48354, #64791, #13864, .T. ) ; +#36991 = ORIENTED_EDGE ( 'NONE', *, *, #52818, .T. ) ; +#36992 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#36993 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 35.33333333333334300, -8.133761268305512700 ) ) ; +#36994 = EDGE_CURVE ( 'NONE', #53446, #57725, #80170, .T. ) ; +#36995 = AXIS2_PLACEMENT_3D ( 'NONE', #6444, #25224, #442 ) ; +#36996 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#36997 = CONICAL_SURFACE ( 'NONE', #74391, 10.00000000000009200, 0.7853981633974447300 ) ; +#36999 = ORIENTED_EDGE ( 'NONE', *, *, #10684, .T. ) ; +#36998 = ADVANCED_FACE ( 'NONE', ( #79140 ), #29523, .T. ) ; +#37000 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474192200, 20.86172549728280500, -28.47230003642276200 ) ) ; +#37001 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37002 = ADVANCED_FACE ( 'NONE', ( #274 ), #77168, .T. ) ; +#37003 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 0.5000000000000158800, 4.650848422521012700 ) ) ; +#37004 = ORIENTED_EDGE ( 'NONE', *, *, #42364, .F. ) ; +#37005 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #28733 ), #41188 ) ; +#37006 = EDGE_CURVE ( 'NONE', #71934, #74602, #65721, .T. ) ; +#37007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37008 = EDGE_CURVE ( 'NONE', #55249, #11933, #12952, .T. ) ; +#37009 = CARTESIAN_POINT ( 'NONE', ( 9.624686020919302400, 8.372468488016762600, -28.60279861539360300 ) ) ; +#37010 = EDGE_CURVE ( 'NONE', #80546, #69802, #51183, .T. ) ; +#37011 = ADVANCED_FACE ( 'NONE', ( #33379 ), #27552, .F. ) ; +#37012 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714284700, 47.42318720225497200, -28.70555803802996700 ) ) ; +#37013 = AXIS2_PLACEMENT_3D ( 'NONE', #77991, #46943, #34756 ) ; +#37014 = CONICAL_SURFACE ( 'NONE', #16675, 10.00000000000009200, 0.7853981633974447300 ) ; +#37015 = CARTESIAN_POINT ( 'NONE', ( 10.37141821671398600, 90.16749699759735400, -28.25056166218041300 ) ) ; +#37016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37018 = ORIENTED_EDGE ( 'NONE', *, *, #70841, .T. ) ; +#37019 = CARTESIAN_POINT ( 'NONE', ( -12.29416214178216500, 24.54999999999999700, -28.37136602294608800 ) ) ; +#37020 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000000, 48.12623792124937700, -28.70555803802996700 ) ) ; +#37021 = ORIENTED_EDGE ( 'NONE', *, *, #40814, .T. ) ; +#37022 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 75.79999999999999700, -28.63843632546336000 ) ) ; +#37023 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#37024 = EDGE_CURVE ( 'NONE', #36616, #62074, #36771, .T. ) ; +#37025 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844491400, 76.13383585008141100, -28.37247596307091900 ) ) ; +#37026 = CARTESIAN_POINT ( 'NONE', ( 3.778842085587715600, 41.43523632220588100, -28.30315276798567200 ) ) ; +#37027 = AXIS2_PLACEMENT_3D ( 'NONE', #62317, #25037, #68558 ) ; +#37028 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818910400, 59.94924284854708700, -28.20555803802997700 ) ) ; +#37029 = AXIS2_PLACEMENT_3D ( 'NONE', #14963, #58485, #21243 ) ; +#37030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37031 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28418, #22119, #59379, #34639 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799616514600E-007, 0.0005050252131287525900 ), + .UNSPECIFIED. ) ; +#37032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37033 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390804100, 13.41466791010193500, -28.53910738522641900 ) ) ; +#37034 = CIRCLE ( 'NONE', #42954, 10.00000000000009200 ) ; +#37035 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.62753447840889000, -28.38801640354855800 ) ) ; +#37036 = ORIENTED_EDGE ( 'NONE', *, *, #14513, .T. ) ; +#37037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37038 = EDGE_LOOP ( 'NONE', ( #11328, #47110, #78230 ) ) ; +#37039 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662741760000, 73.66464174796051600, -28.53896444442203500 ) ) ; +#37040 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846291900, 90.80000000000001100, -28.55171188418377800 ) ) ; +#37041 = ORIENTED_EDGE ( 'NONE', *, *, #5818, .T. ) ; +#37042 = CIRCLE ( 'NONE', #73033, 9.500000000000101300 ) ; +#37043 = ORIENTED_EDGE ( 'NONE', *, *, #64388, .F. ) ; +#37044 = ORIENTED_EDGE ( 'NONE', *, *, #9098, .T. ) ; +#37045 = ORIENTED_EDGE ( 'NONE', *, *, #62553, .F. ) ; +#37046 = CARTESIAN_POINT ( 'NONE', ( 10.22125914545566000, 28.66476764525110700, -28.30311733712046200 ) ) ; +#37047 = ORIENTED_EDGE ( 'NONE', *, *, #47927, .T. ) ; +#37048 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.84510448120794000, -28.37193179497695900 ) ) ; +#37049 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37050 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.66749699759768100, -28.20555803802996700 ) ) ; +#37051 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#37052 = CARTESIAN_POINT ( 'NONE', ( -9.487278546916897400, 81.47860033657565300, -28.56001054660905700 ) ) ; +#37053 = AXIS2_PLACEMENT_3D ( 'NONE', #51983, #76774, #8484 ) ; +#37054 = EDGE_LOOP ( 'NONE', ( #20521, #26339, #759 ) ) ; +#37055 = FACE_OUTER_BOUND ( 'NONE', #67395, .T. ) ; +#37056 = EDGE_LOOP ( 'NONE', ( #28404, #20691, #15525, #4179 ) ) ; +#37057 = VERTEX_POINT ( 'NONE', #12843 ) ; +#37058 = EDGE_LOOP ( 'NONE', ( #26643, #62457, #33919, #79648 ) ) ; +#37059 = EDGE_LOOP ( 'NONE', ( #27089, #8124, #24576 ) ) ; +#37060 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5516, #42760, #18025, #61561 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001538296717493309300 ), + .UNSPECIFIED. ) ; +#37061 = VERTEX_POINT ( 'NONE', #56322 ) ; +#37062 = CONICAL_SURFACE ( 'NONE', #17543, 10.00000000000009200, 0.7853981633974447300 ) ; +#37063 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 41.33333333333335700, -5.205558038030008400 ) ) ; +#37065 = AXIS2_PLACEMENT_3D ( 'NONE', #48957, #11753, #55235 ) ; +#37064 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9850, #78408, #16378, #59903 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549583498902800E-007, 0.0002592578639939285300 ), + .UNSPECIFIED. ) ; +#37066 = EDGE_LOOP ( 'NONE', ( #22162, #9654, #52144, #6939 ) ) ; +#37067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37069 = ADVANCED_FACE ( 'NONE', ( #49892 ), #75218, .F. ) ; +#37070 = AXIS2_PLACEMENT_3D ( 'NONE', #68693, #31714, #75214 ) ; +#37071 = FACE_OUTER_BOUND ( 'NONE', #15470, .T. ) ; +#37073 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ; +#37072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37074 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #306, #74855, #50044, #12852 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001492013864177404900 ), + .UNSPECIFIED. ) ; +#37075 = ADVANCED_FACE ( 'NONE', ( #45993 ), #42099, .F. ) ; +#37076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37077 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#37078 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#37079 = CARTESIAN_POINT ( 'NONE', ( -16.42212147479898800, 41.48660297389273000, -28.58281552185033200 ) ) ; +#37080 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 12.66666666666667100, 8.320721403598824400 ) ) ; +#37081 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911116600, 61.19833471562216700, -28.28704243186579200 ) ) ; +#37082 = EDGE_CURVE ( 'NONE', #76937, #64055, #22328, .T. ) ; +#37083 = ADVANCED_FACE ( 'NONE', ( #14890 ), #8999, .T. ) ; +#37084 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 83.67681279774500100, -28.70555803802997700 ) ) ; +#37085 = EDGE_CURVE ( 'NONE', #6036, #63837, #7837, .T. ) ; +#37086 = ORIENTED_EDGE ( 'NONE', *, *, #41057, .F. ) ; +#37087 = EDGE_LOOP ( 'NONE', ( #28670, #71184, #10803 ) ) ; +#37088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#37089 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 33.15857157145700300, -28.20555803802996700 ) ) ; +#37090 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416090400, 41.01125751638927900, -28.53740755999537300 ) ) ; +#37091 = ORIENTED_EDGE ( 'NONE', *, *, #74798, .F. ) ; +#37092 = EDGE_CURVE ( 'NONE', #14357, #60081, #74204, .T. ) ; +#37093 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#37094 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39240, #76507, #58025, #20774 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185221687409600E-007, 0.0006654852833082112600 ), + .UNSPECIFIED. ) ; +#37095 = ADVANCED_FACE ( 'NONE', ( #10998 ), #56716, .F. ) ; +#37096 = EDGE_CURVE ( 'NONE', #35911, #77629, #59738, .T. ) ; +#37097 = CIRCLE ( 'NONE', #60157, 10.00000000000009600 ) ; +#37098 = ORIENTED_EDGE ( 'NONE', *, *, #713, .F. ) ; +#37099 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#37100 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#37101 = ORIENTED_EDGE ( 'NONE', *, *, #5450, .T. ) ; +#37102 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 47.16666666666667900, -6.205558038030004800 ) ) ; +#37103 = EDGE_CURVE ( 'NONE', #76799, #41995, #45204, .T. ) ; +#37104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#37105 = CONICAL_SURFACE ( 'NONE', #23459, 10.00000000000009200, 0.7853981633974447300 ) ; +#37106 = VERTEX_POINT ( 'NONE', #50575 ) ; +#37107 = ORIENTED_EDGE ( 'NONE', *, *, #41401, .T. ) ; +#37108 = VERTEX_POINT ( 'NONE', #7339 ) ; +#37109 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37110 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37111 = ADVANCED_FACE ( 'NONE', ( #58664 ), #23646, .T. ) ; +#37112 = CARTESIAN_POINT ( 'NONE', ( -3.628581783286365600, 70.16749699759769500, -28.25056166218020700 ) ) ; +#37113 = VERTEX_POINT ( 'NONE', #38606 ) ; +#37114 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428612900, 49.57141756547894600, -28.70555803802996700 ) ) ; +#37115 = ORIENTED_EDGE ( 'NONE', *, *, #52217, .F. ) ; +#37116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37117 = AXIS2_PLACEMENT_3D ( 'NONE', #20350, #51579, #14361 ) ; +#37118 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37119 = CONICAL_SURFACE ( 'NONE', #53618, 10.00000000000009200, 0.7853981633974447300 ) ; +#37120 = EDGE_CURVE ( 'NONE', #30084, #53826, #25600, .T. ) ; +#37121 = EDGE_CURVE ( 'NONE', #2740, #28144, #30817, .T. ) ; +#37122 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37123 = EDGE_CURVE ( 'NONE', #63031, #7046, #44031, .T. ) ; +#37124 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#37125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37126 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 71.25732391202396300, -28.20555803802997700 ) ) ; +#37127 = CARTESIAN_POINT ( 'NONE', ( -2.277608394786786200, 50.55000000000005400, -28.70555803802997400 ) ) ; +#37128 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#37129 = LINE ( 'NONE', #43018, #35231 ) ; +#37130 = AXIS2_PLACEMENT_3D ( 'NONE', #24560, #68076, #30828 ) ; +#37131 = ORIENTED_EDGE ( 'NONE', *, *, #76670, .T. ) ; +#37132 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627434800, 83.66464174796072900, -28.53896444442202100 ) ) ; +#37133 = ORIENTED_EDGE ( 'NONE', *, *, #45064, .F. ) ; +#37134 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37135 = ORIENTED_EDGE ( 'NONE', *, *, #32965, .T. ) ; +#37136 = ORIENTED_EDGE ( 'NONE', *, *, #68927, .F. ) ; +#37137 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#37138 = ORIENTED_EDGE ( 'NONE', *, *, #49992, .T. ) ; +#37139 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#37140 = VECTOR ( 'NONE', #6869, 1000.000000000000000 ) ; +#37141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37142 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#37143 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510358000, 49.65930907398620800, -28.35186440610858900 ) ) ; +#37144 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040718200, 47.44142842854297000, -28.37229765499281000 ) ) ; +#37145 = ORIENTED_EDGE ( 'NONE', *, *, #15685, .T. ) ; +#37146 = CIRCLE ( 'NONE', #16965, 10.50000000000009400 ) ; +#37147 = ORIENTED_EDGE ( 'NONE', *, *, #79565, .T. ) ; +#37148 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 53.50000000000000700, 6.847000845227641200 ) ) ; +#37149 = ORIENTED_EDGE ( 'NONE', *, *, #68474, .T. ) ; +#37150 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3084, #9054, #15623, #59123 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387257887800E-007, 0.0007987676590763809600 ), + .UNSPECIFIED. ) ; +#37151 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#37152 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 18.66666666666667100, -3.705558038030004400 ) ) ; +#37153 = AXIS2_PLACEMENT_3D ( 'NONE', #27997, #2918, #9160 ) ; +#37154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#37155 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#37156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37157 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37158 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702740100, 59.37488905616108800, -28.55192314908463700 ) ) ; +#37159 = EDGE_CURVE ( 'NONE', #65209, #46326, #16353, .T. ) ; +#37160 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.737967874686777500, -28.38801640354855500 ) ) ; +#37161 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 21.00000000000001800, -1.205558038030002800 ) ) ; +#37162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37163 = EDGE_LOOP ( 'NONE', ( #12530, #64805, #77414 ) ) ; +#37164 = AXIS2_PLACEMENT_3D ( 'NONE', #37939, #13235, #19473 ) ; +#37165 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#37166 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 90.07141756547889600, -28.70555803802997700 ) ) ; +#37167 = VERTEX_POINT ( 'NONE', #26434 ) ; +#37168 = CARTESIAN_POINT ( 'NONE', ( 2.624686020919306800, 8.372468488016760800, -28.60279861539359900 ) ) ; +#37169 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056670900, 14.04999999999997800, -28.70555803802992800 ) ) ; +#37170 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701400, 25.48096581827318700, -28.69431509262337700 ) ) ; +#37171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37172 = CARTESIAN_POINT ( 'NONE', ( -2.963744891818757700, 89.94924284854707300, -28.20555803803005900 ) ) ; +#37173 = FACE_OUTER_BOUND ( 'NONE', #1296, .T. ) ; +#37174 = ORIENTED_EDGE ( 'NONE', *, *, #16306, .F. ) ; +#37175 = CIRCLE ( 'NONE', #57651, 10.00000000000009200 ) ; +#37176 = AXIS2_PLACEMENT_3D ( 'NONE', #57411, #63696, #13910 ) ; +#37177 = ORIENTED_EDGE ( 'NONE', *, *, #29093, .F. ) ; +#37178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37179 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826525400, 38.95051138331399400, -28.33414295261581400 ) ) ; +#37180 = ADVANCED_FACE ( 'NONE', ( #40161 ), #38193, .T. ) ; +#37181 = EDGE_LOOP ( 'NONE', ( #39457, #75414, #4592 ) ) ; +#37182 = CIRCLE ( 'NONE', #80795, 10.00000000000009200 ) ; +#37183 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37184 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510337200, 30.94069092601379400, -28.35186440610857500 ) ) ; +#37185 = VERTEX_POINT ( 'NONE', #39148 ) ; +#37186 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#37187 = ORIENTED_EDGE ( 'NONE', *, *, #11493, .F. ) ; +#37188 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 10.17701665379185300, -28.20555803802992800 ) ) ; +#37189 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#37190 = ADVANCED_FACE ( 'NONE', ( #60648 ), #5128, .F. ) ; +#37191 = ORIENTED_EDGE ( 'NONE', *, *, #48450, .F. ) ; +#37192 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804072300, 47.44142842854297000, -28.37229765499281000 ) ) ; +#37193 = CONICAL_SURFACE ( 'NONE', #45710, 10.50000000000009400, 0.7853981633974500600 ) ; +#37194 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62464, #74967, #43923, #6678 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447103417000E-007, 0.0002745498510224810200 ), + .UNSPECIFIED. ) ; +#37195 = ADVANCED_FACE ( 'NONE', ( #71307 ), #52799, .F. ) ; +#37196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37197 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37198 = CARTESIAN_POINT ( 'NONE', ( -10.46481234601704300, 9.406791769321968000, -28.68794773163825000 ) ) ; +#37199 = ORIENTED_EDGE ( 'NONE', *, *, #23431, .F. ) ; +#37200 = FACE_OUTER_BOUND ( 'NONE', #42109, .T. ) ; +#37201 = EDGE_CURVE ( 'NONE', #13621, #67687, #1847, .T. ) ; +#37202 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 24.50000000000001800, 4.650848422521016300 ) ) ; +#37203 = ORIENTED_EDGE ( 'NONE', *, *, #51833, .F. ) ; +#37204 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37206 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68468, #18429, #74724, #37424 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565734085195400E-007, 0.0006649316450229557400 ), + .UNSPECIFIED. ) ; +#37207 = EDGE_LOOP ( 'NONE', ( #74782, #30878, #43882 ) ) ; +#37208 = ORIENTED_EDGE ( 'NONE', *, *, #1497, .F. ) ; +#37209 = EDGE_LOOP ( 'NONE', ( #19773, #69350, #23008, #74395 ) ) ; +#37210 = VECTOR ( 'NONE', #6652, 1000.000000000000000 ) ; +#37211 = ORIENTED_EDGE ( 'NONE', *, *, #23552, .F. ) ; +#37212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53375, #59653, #41136, #3851 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100394329100, 0.001517194977238211900 ), + .UNSPECIFIED. ) ; +#37213 = CONICAL_SURFACE ( 'NONE', #61764, 10.50000000000009600, 0.7853981633974518300 ) ; +#37214 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37215 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807161900, 74.79999999999998300, -28.70555803802997700 ) ) ; +#37216 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873536600, 11.67955320215951100, -28.64059091698902600 ) ) ; +#37218 = ORIENTED_EDGE ( 'NONE', *, *, #66038, .F. ) ; +#37217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21173, #33662, #77182, #39916 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736150955800E-007, 0.0006649316450229786100 ), + .UNSPECIFIED. ) ; +#37219 = ORIENTED_EDGE ( 'NONE', *, *, #56894, .T. ) ; +#37220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37221 = EDGE_CURVE ( 'NONE', #44982, #8089, #54755, .T. ) ; +#37222 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37223 = EDGE_CURVE ( 'NONE', #78744, #47124, #68182, .T. ) ; +#37224 = CIRCLE ( 'NONE', #25790, 10.50000000000009900 ) ; +#37225 = EDGE_LOOP ( 'NONE', ( #629, #36360, #70057 ) ) ; +#37226 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153686800, 60.79999999999998300, -28.55171188418376400 ) ) ; +#37227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37228 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002100, 83.43454006867176500, -28.70555803802999500 ) ) ; +#37229 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148544600, 15.00238095238092000, -28.70555803802992800 ) ) ; +#37230 = AXIS2_PLACEMENT_3D ( 'NONE', #24438, #36920, #74481 ) ; +#37231 = EDGE_CURVE ( 'NONE', #75756, #11961, #66487, .T. ) ; +#37232 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#37233 = EDGE_CURVE ( 'NONE', #28190, #35314, #7057, .T. ) ; +#37234 = EDGE_CURVE ( 'NONE', #60832, #69047, #53725, .T. ) ; +#37235 = AXIS2_PLACEMENT_3D ( 'NONE', #52543, #15313, #58813 ) ; +#37236 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37238 = ORIENTED_EDGE ( 'NONE', *, *, #35612, .T. ) ; +#37240 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79920, #17645, #5109, #11661 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625876322760700E-007, 0.0002930369617398645500 ), + .UNSPECIFIED. ) ; +#37239 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37241 = ORIENTED_EDGE ( 'NONE', *, *, #75852, .T. ) ; +#37242 = AXIS2_PLACEMENT_3D ( 'NONE', #5203, #73479, #48691 ) ; +#37243 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 68.16666666666668600, 3.794441961969996900 ) ) ; +#37244 = AXIS2_PLACEMENT_3D ( 'NONE', #22247, #65782, #28554 ) ; +#37245 = AXIS2_PLACEMENT_3D ( 'NONE', #41082, #22592, #28626 ) ; +#37246 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51267, #14071, #45280, #8044 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785963473700E-007, 0.0006862403197095472100 ), + .UNSPECIFIED. ) ; +#37247 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37248 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 33.16666666666667900, 6.794441961969992500 ) ) ; +#37249 = FACE_OUTER_BOUND ( 'NONE', #51767, .T. ) ; +#37250 = ORIENTED_EDGE ( 'NONE', *, *, #40568, .T. ) ; +#37251 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 65.79999999999998300, -28.20555803802997700 ) ) ; +#37252 = FACE_OUTER_BOUND ( 'NONE', #68274, .T. ) ; +#37253 = ORIENTED_EDGE ( 'NONE', *, *, #76926, .T. ) ; +#37254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37255 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 58.39962244433174700, -28.53664883431611100 ) ) ; +#37256 = ORIENTED_EDGE ( 'NONE', *, *, #15089, .F. ) ; +#37257 = CONICAL_SURFACE ( 'NONE', #28318, 10.50000000000009600, 0.7853981633974500600 ) ; +#37258 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 70.50000000000002800, -9.258116921287651700 ) ) ; +#37259 = ORIENTED_EDGE ( 'NONE', *, *, #62775, .F. ) ; +#37260 = ORIENTED_EDGE ( 'NONE', *, *, #54043, .F. ) ; +#37261 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534569400, 29.49920551340399300, -28.70555803802994200 ) ) ; +#37262 = AXIS2_PLACEMENT_3D ( 'NONE', #20536, #51488, #26800 ) ; +#37263 = EDGE_CURVE ( 'NONE', #44803, #71059, #21699, .T. ) ; +#37264 = CONICAL_SURFACE ( 'NONE', #46191, 10.50000000000009200, 0.7853981633974482800 ) ; +#37265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37266 = ADVANCED_FACE ( 'NONE', ( #73284 ), #67417, .T. ) ; +#37267 = CARTESIAN_POINT ( 'NONE', ( -10.98574357684217700, 71.58004100757902700, -28.24987021275288500 ) ) ; +#37268 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507686300, 17.57379779496231400, -28.70555803803009500 ) ) ; +#37269 = VERTEX_POINT ( 'NONE', #28903 ) ; +#37270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37271 = FACE_OUTER_BOUND ( 'NONE', #67362, .T. ) ; +#37272 = ORIENTED_EDGE ( 'NONE', *, *, #76925, .F. ) ; +#37273 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 11.92856308690589500, -28.36981695106777200 ) ) ; +#37274 = EDGE_CURVE ( 'NONE', #14827, #2143, #36270, .T. ) ; +#37275 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462829400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#37276 = ORIENTED_EDGE ( 'NONE', *, *, #55439, .F. ) ; +#37277 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#37278 = AXIS2_PLACEMENT_3D ( 'NONE', #8181, #51681, #14470 ) ; +#37279 = ORIENTED_EDGE ( 'NONE', *, *, #31420, .T. ) ; +#37280 = VERTEX_POINT ( 'NONE', #72398 ) ; +#37281 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37282 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049506200, 10.40771342879318200, -28.53891855579980700 ) ) ; +#37283 = ADVANCED_FACE ( 'NONE', ( #19736 ), #65497, .F. ) ; +#37284 = CIRCLE ( 'NONE', #78924, 10.00000000000009400 ) ; +#37285 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37288 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#37289 = ORIENTED_EDGE ( 'NONE', *, *, #70233, .F. ) ; +#37290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37291 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#37292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37293 = ORIENTED_EDGE ( 'NONE', *, *, #38533, .F. ) ; +#37294 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972572500, 59.37488905616159900, -28.55192314908416400 ) ) ; +#37295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13304, #38264, #57073, #19811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849890300, 0.007919184322923060800 ), + .UNSPECIFIED. ) ; +#37296 = CONICAL_SURFACE ( 'NONE', #34673, 10.00000000000009600, 0.7853981633974447300 ) ; +#37297 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.22294471194861400, -28.20555803802997700 ) ) ; +#37298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37299 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#37300 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#37301 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37302 = AXIS2_PLACEMENT_3D ( 'NONE', #31321, #74822, #37526 ) ; +#37303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37304 = PLANE ( 'NONE', #16133 ) ; +#37305 = ADVANCED_FACE ( 'NONE', ( #17788 ), #72650, .T. ) ; +#37306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14795, #70816, #27340, #77080 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983715074001100E-007, 0.001076779618376770300 ), + .UNSPECIFIED. ) ; +#37307 = EDGE_CURVE ( 'NONE', #25486, #68176, #50825, .T. ) ; +#37308 = CONICAL_SURFACE ( 'NONE', #74291, 10.00000000000009600, 0.7853981633974447300 ) ; +#37309 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37310 = ORIENTED_EDGE ( 'NONE', *, *, #46152, .T. ) ; +#37311 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 39.16666666666669300, 0.9380355014189834000 ) ) ; +#37312 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 70.34267608797603100, -28.20555803802997700 ) ) ; +#37313 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75875, #63391, #44815, #7577 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.315697764555996100E-016, 0.001246264537621700600 ), + .UNSPECIFIED. ) ; +#37314 = ORIENTED_EDGE ( 'NONE', *, *, #5298, .T. ) ; +#37315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37317 = VERTEX_POINT ( 'NONE', #54120 ) ; +#37316 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260044500, 71.39965687931166400, -28.70555803803001600 ) ) ; +#37318 = CIRCLE ( 'NONE', #75607, 9.500000000000099500 ) ; +#37319 = ORIENTED_EDGE ( 'NONE', *, *, #13883, .T. ) ; +#37320 = CIRCLE ( 'NONE', #46079, 10.00000000000009200 ) ; +#37321 = EDGE_CURVE ( 'NONE', #77818, #44982, #3159, .T. ) ; +#37322 = EDGE_LOOP ( 'NONE', ( #56649, #77048, #819, #42089 ) ) ; +#37323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37324 = ORIENTED_EDGE ( 'NONE', *, *, #37957, .F. ) ; +#37325 = FACE_OUTER_BOUND ( 'NONE', #33970, .T. ) ; +#37326 = ORIENTED_EDGE ( 'NONE', *, *, #67044, .F. ) ; +#37327 = ORIENTED_EDGE ( 'NONE', *, *, #22374, .T. ) ; +#37328 = ORIENTED_EDGE ( 'NONE', *, *, #77266, .T. ) ; +#37329 = AXIS2_PLACEMENT_3D ( 'NONE', #29045, #3959, #16494 ) ; +#37330 = EDGE_CURVE ( 'NONE', #13621, #47643, #69351, .T. ) ; +#37331 = EDGE_CURVE ( 'NONE', #73641, #68569, #48880, .T. ) ; +#37332 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62628, #19096, #56351, #25384 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241112200, 0.0005195704752301965700 ), + .UNSPECIFIED. ) ; +#37333 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507532300, 50.20543520232829600, -28.70555803802996700 ) ) ; +#37334 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.36203212531319200, -28.38801640354855500 ) ) ; +#37335 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 10.49999999999999800, -9.258116921287651700 ) ) ; +#37336 = CONICAL_SURFACE ( 'NONE', #35736, 10.00000000000009400, 0.7853981633974447300 ) ; +#37337 = EDGE_CURVE ( 'NONE', #3351, #31227, #39242, .T. ) ; +#37338 = ORIENTED_EDGE ( 'NONE', *, *, #28366, .F. ) ; +#37339 = AXIS2_PLACEMENT_3D ( 'NONE', #16315, #59843, #22563 ) ; +#37340 = CIRCLE ( 'NONE', #55011, 10.00000000000009400 ) ; +#37341 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506395100, 28.58087956867520400, -28.30223257055572000 ) ) ; +#37342 = VERTEX_POINT ( 'NONE', #79431 ) ; +#37343 = EDGE_LOOP ( 'NONE', ( #11840, #7840, #30443 ) ) ; +#37344 = ORIENTED_EDGE ( 'NONE', *, *, #75317, .F. ) ; +#37345 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#37346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37347 = CARTESIAN_POINT ( 'NONE', ( -12.29416214178217400, 14.05000000000000600, -28.37136602294607000 ) ) ; +#37348 = ORIENTED_EDGE ( 'NONE', *, *, #75515, .F. ) ; +#37349 = FACE_OUTER_BOUND ( 'NONE', #50434, .T. ) ; +#37350 = AXIS2_PLACEMENT_3D ( 'NONE', #4056, #53819, #59841 ) ; +#37351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37352 = ORIENTED_EDGE ( 'NONE', *, *, #55829, .T. ) ; +#37353 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37354 = EDGE_CURVE ( 'NONE', #21820, #55826, #34332, .T. ) ; +#37355 = EDGE_CURVE ( 'NONE', #75725, #26122, #24819, .T. ) ; +#37356 = ADVANCED_FACE ( 'NONE', ( #15822 ), #61583, .T. ) ; +#37357 = EDGE_LOOP ( 'NONE', ( #68756, #71500, #7171 ) ) ; +#37359 = AXIS2_PLACEMENT_3D ( 'NONE', #28825, #10282, #66058 ) ; +#37358 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37360 = ORIENTED_EDGE ( 'NONE', *, *, #51242, .T. ) ; +#37361 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#37362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37363 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 45.00000000000000700, 3.794441961969998300 ) ) ; +#37364 = ORIENTED_EDGE ( 'NONE', *, *, #64785, .T. ) ; +#37365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37366 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873299900, 81.70803673496190800, -28.29033182162404000 ) ) ; +#37367 = ORIENTED_EDGE ( 'NONE', *, *, #61786, .T. ) ; +#37368 = CIRCLE ( 'NONE', #43450, 10.00000000000009400 ) ; +#37369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37370 = CARTESIAN_POINT ( 'NONE', ( 3.599312978277290100, 92.17541673345654400, -28.69290071860185900 ) ) ; +#37371 = EDGE_CURVE ( 'NONE', #22529, #36198, #10360, .T. ) ; +#37372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37373 = ADVANCED_FACE ( 'NONE', ( #63541 ), #28519, .F. ) ; +#37374 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37375 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654408300, 90.07527064970101100, -28.39317435246135400 ) ) ; +#37376 = AXIS2_PLACEMENT_3D ( 'NONE', #6410, #49887, #12690 ) ; +#37377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37378 = AXIS2_PLACEMENT_3D ( 'NONE', #39677, #2404, #45900 ) ; +#37379 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#37380 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719598500, 43.65857157145702400, -28.37229765499279200 ) ) ; +#37381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58386, #14863, #70883, #33627 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565735345297200E-007, 0.0002592140922082574300 ), + .UNSPECIFIED. ) ; +#37382 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.68929190448938000, -28.20555803802997700 ) ) ; +#37383 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37385 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274741400, 14.04999999999976300, -28.20555803803009500 ) ) ; +#37386 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37387 = VECTOR ( 'NONE', #60812, 1000.000000000000000 ) ; +#37388 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 51.82440674572815500, -28.45987523529581900 ) ) ; +#37389 = ADVANCED_FACE ( 'NONE', ( #78103 ), #76138, .T. ) ; +#37390 = ADVANCED_FACE ( 'NONE', ( #44968 ), #43042, .F. ) ; +#37391 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571400400, 60.07141756547891700, -28.70555803802997700 ) ) ; +#37392 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274712100, 45.86787096422377600, -28.37244029424745800 ) ) ; +#37393 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290091100, 20.53732497909458800, -28.41043597897465400 ) ) ; +#37394 = ORIENTED_EDGE ( 'NONE', *, *, #8873, .T. ) ; +#37395 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428624000, 28.57141756547896300, -28.70555803802994200 ) ) ; +#37396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37397 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37400 = EDGE_LOOP ( 'NONE', ( #55378, #17145, #69231, #5620 ) ) ; +#37399 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 26.42318720225497600, -28.70555803802994200 ) ) ; +#37401 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#37402 = ADVANCED_FACE ( 'NONE', ( #30448 ), #67718, .T. ) ; +#37403 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55505, #11997, #68019, #30776 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885673997766700E-007, 0.0007987728781051831900 ), + .UNSPECIFIED. ) ; +#37404 = AXIS2_PLACEMENT_3D ( 'NONE', #20611, #39339, #57859 ) ; +#37405 = CONICAL_SURFACE ( 'NONE', #46544, 10.50000000000009600, 0.7853981633974500600 ) ; +#37406 = EDGE_LOOP ( 'NONE', ( #11390, #31624, #41452, #42840 ) ) ; +#37407 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 51.33333333333333600, -10.73183747965883100 ) ) ; +#37408 = FACE_OUTER_BOUND ( 'NONE', #72365, .T. ) ; +#37409 = CONICAL_SURFACE ( 'NONE', #75734, 10.00000000000009200, 0.7853981633974447300 ) ; +#37410 = ORIENTED_EDGE ( 'NONE', *, *, #1231, .T. ) ; +#37411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37412 = ORIENTED_EDGE ( 'NONE', *, *, #31325, .T. ) ; +#37413 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 16.50000000000000700, 2.454695999814380200 ) ) ; +#37414 = AXIS2_PLACEMENT_3D ( 'NONE', #67153, #29933, #73413 ) ; +#37415 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23660, #29948, #5142, #48630 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001538296717493302400 ), + .UNSPECIFIED. ) ; +#37416 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818076400, 59.94924284854686600, -28.20555803803047800 ) ) ; +#37417 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894335400, 24.55000000000001500, -28.70555803802994200 ) ) ; +#37418 = EDGE_CURVE ( 'NONE', #26617, #70543, #59628, .T. ) ; +#37419 = FACE_OUTER_BOUND ( 'NONE', #1662, .T. ) ; +#37420 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#37421 = ORIENTED_EDGE ( 'NONE', *, *, #21917, .T. ) ; +#37422 = CIRCLE ( 'NONE', #72204, 9.500000000000101300 ) ; +#37423 = ORIENTED_EDGE ( 'NONE', *, *, #56804, .F. ) ; +#37424 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356200, 80.79999999999968500, -28.55171188418412200 ) ) ; +#37425 = EDGE_LOOP ( 'NONE', ( #60432, #36340, #78942, #68158, #70766 ) ) ; +#37426 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 18.83333333333333900, -4.152999154772353500 ) ) ; +#37428 = VERTEX_POINT ( 'NONE', #61489 ) ; +#37427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17999, #55245, #67779, #30534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704003975200 ), + .UNSPECIFIED. ) ; +#37429 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155515000, 85.79999999999967000, -28.20555803803030800 ) ) ; +#37430 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .T. ) ; +#37431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37432 = ORIENTED_EDGE ( 'NONE', *, *, #48401, .T. ) ; +#37433 = CONICAL_SURFACE ( 'NONE', #75665, 10.50000000000009600, 0.7853981633974500600 ) ; +#37434 = ORIENTED_EDGE ( 'NONE', *, *, #2892, .T. ) ; +#37435 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#37436 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25531, #19242, #56507, #69023 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951433624200E-007, 0.0007331043932795554500 ), + .UNSPECIFIED. ) ; +#37437 = CARTESIAN_POINT ( 'NONE', ( 16.52200773130725200, 41.47693523592567300, -28.54785533207244800 ) ) ; +#37438 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 41.44069092601377900, -28.35186440610859600 ) ) ; +#37439 = EDGE_LOOP ( 'NONE', ( #80611, #56551, #45988 ) ) ; +#37440 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 79.41684396980637900, -28.70555803803024400 ) ) ; +#37441 = EDGE_CURVE ( 'NONE', #28207, #17804, #46931, .T. ) ; +#37442 = ORIENTED_EDGE ( 'NONE', *, *, #26676, .T. ) ; +#37443 = FACE_OUTER_BOUND ( 'NONE', #7164, .T. ) ; +#37444 = EDGE_CURVE ( 'NONE', #49871, #122, #13886, .T. ) ; +#37445 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37446 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853718400, 60.34267608797617300, -28.20555803803014400 ) ) ; +#37447 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948464100, 90.58127875436058200, -28.53757464917613600 ) ) ; +#37448 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#37449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37450 = EDGE_CURVE ( 'NONE', #20905, #3423, #76651, .T. ) ; +#37451 = ADVANCED_FACE ( 'NONE', ( #80063 ), #24573, .T. ) ; +#37452 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#37454 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811161000, 77.05460903980878100, -28.69802137271993600 ) ) ; +#37453 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 80.34267608797600200, -28.20555803802997700 ) ) ; +#37455 = EDGE_CURVE ( 'NONE', #11478, #56323, #62217, .T. ) ; +#37456 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000000400, 81.43250300240228500, -28.20555803802997700 ) ) ; +#37457 = AXIS2_PLACEMENT_3D ( 'NONE', #14810, #58331, #21091 ) ; +#37458 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279000, 39.35339758437808700, -28.20555803802995200 ) ) ; +#37459 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 22.33333333333334300, -5.205558038030008400 ) ) ; +#37460 = CIRCLE ( 'NONE', #74141, 9.500000000000097700 ) ; +#37461 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660897100, 70.13716795162599700, -28.48697406221726800 ) ) ; +#37462 = ORIENTED_EDGE ( 'NONE', *, *, #24870, .T. ) ; +#37463 = ORIENTED_EDGE ( 'NONE', *, *, #7752, .T. ) ; +#37464 = FACE_OUTER_BOUND ( 'NONE', #72959, .T. ) ; +#37465 = ADVANCED_FACE ( 'NONE', ( #41111 ), #72281, .F. ) ; +#37466 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655605600, 38.92298334620759400, -28.20555803802996000 ) ) ; +#37467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#37468 = AXIS2_PLACEMENT_3D ( 'NONE', #30531, #37007, #68034 ) ; +#37469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37471 = ORIENTED_EDGE ( 'NONE', *, *, #30822, .F. ) ; +#37470 = EDGE_CURVE ( 'NONE', #64791, #26910, #7998, .T. ) ; +#37472 = EDGE_CURVE ( 'NONE', #66057, #52291, #47705, .T. ) ; +#37473 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70086, #64148, #70350, #33112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287113152400E-007, 0.0007303759720927695700 ), + .UNSPECIFIED. ) ; +#37474 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582500, 65.79999999999982700, -28.70525300642874800 ) ) ; +#37475 = EDGE_CURVE ( 'NONE', #59554, #13603, #33278, .T. ) ; +#37476 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#37477 = CIRCLE ( 'NONE', #4141, 10.00000000000009200 ) ; +#37478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37479 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37480 = CIRCLE ( 'NONE', #72120, 10.00000000000009200 ) ; +#37481 = ORIENTED_EDGE ( 'NONE', *, *, #41873, .F. ) ; +#37482 = AXIS2_PLACEMENT_3D ( 'NONE', #7726, #51207, #14007 ) ; +#37483 = ADVANCED_FACE ( 'NONE', ( #57645 ), #22622, .F. ) ; +#37484 = CONICAL_SURFACE ( 'NONE', #64636, 10.50000000000009600, 0.7853981633974518300 ) ; +#37485 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462829400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#37486 = AXIS2_PLACEMENT_3D ( 'NONE', #16167, #41169, #3906 ) ; +#37488 = EDGE_LOOP ( 'NONE', ( #71853, #26779, #26306 ) ) ; +#37487 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192778600, 66.79999999999982700, -28.70555803803030800 ) ) ; +#37489 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37490 = EDGE_CURVE ( 'NONE', #4132, #26644, #39128, .T. ) ; +#37491 = ORIENTED_EDGE ( 'NONE', *, *, #79060, .F. ) ; +#37492 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187775300, 61.60186521182759400, -28.24089224568519500 ) ) ; +#37493 = AXIS2_PLACEMENT_3D ( 'NONE', #66258, #72510, #22730 ) ; +#37494 = AXIS2_PLACEMENT_3D ( 'NONE', #29996, #73476, #36212 ) ; +#37495 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 47.10073525436786200, -28.70555803802996700 ) ) ; +#37496 = CIRCLE ( 'NONE', #5578, 10.00000000000009400 ) ; +#37497 = ADVANCED_FACE ( 'NONE', ( #74231 ), #53748, .F. ) ; +#37498 = CIRCLE ( 'NONE', #57537, 10.00000000000009200 ) ; +#37499 = EDGE_LOOP ( 'NONE', ( #62289, #72576, #75008 ) ) ; +#37500 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548987100, 18.15930907398587700, -28.35186440610879900 ) ) ; +#37501 = EDGE_LOOP ( 'NONE', ( #68210, #46458, #68252, #31998 ) ) ; +#37502 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009100, 15.94142842854307000, -28.20555803802992800 ) ) ; +#37503 = ORIENTED_EDGE ( 'NONE', *, *, #31307, .F. ) ; +#37504 = EDGE_LOOP ( 'NONE', ( #17387, #31959, #80216, #37289 ) ) ; +#37505 = VERTEX_POINT ( 'NONE', #31805 ) ; +#37506 = ADVANCED_FACE ( 'NONE', ( #9971 ), #20670, .F. ) ; +#37507 = FACE_OUTER_BOUND ( 'NONE', #24138, .T. ) ; +#37508 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 66.00000000000000000, -6.205558038030003100 ) ) ; +#37509 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60124, #16595, #66375, #29148 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572489594000E-007, 0.0007596410370205397600 ), + .UNSPECIFIED. ) ; +#37510 = VERTEX_POINT ( 'NONE', #44252 ) ; +#37511 = ORIENTED_EDGE ( 'NONE', *, *, #77516, .F. ) ; +#37512 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 14.05000000000000600, -28.20555803802992800 ) ) ; +#37513 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#37514 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 31.00000000000001400, -9.205558038030005700 ) ) ; +#37515 = VERTEX_POINT ( 'NONE', #50509 ) ; +#37516 = CIRCLE ( 'NONE', #48208, 9.500000000000099500 ) ; +#37517 = AXIS2_PLACEMENT_3D ( 'NONE', #13015, #56505, #19240 ) ; +#37518 = CARTESIAN_POINT ( 'NONE', ( 10.44924322801819700, 8.958478180218991200, -28.65366437610099800 ) ) ; +#37519 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37520 = ORIENTED_EDGE ( 'NONE', *, *, #8839, .F. ) ; +#37521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37523 = CONICAL_SURFACE ( 'NONE', #23599, 10.50000000000009600, 0.7853981633974500600 ) ; +#37524 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 68.33333333333334300, 8.320721403598817300 ) ) ; +#37525 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24275, #42750, #55535, #18285 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646121100, 0.0009605145132142215400 ), + .UNSPECIFIED. ) ; +#37526 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37527 = AXIS2_PLACEMENT_3D ( 'NONE', #72530, #35276, #78791 ) ; +#37528 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.802775742211540700, -28.32715733700493000 ) ) ; +#37529 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338502400, 10.10677350908861500, -28.30799595738888300 ) ) ; +#37530 = EDGE_CURVE ( 'NONE', #60588, #56186, #18825, .T. ) ; +#37531 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#37532 = AXIS2_PLACEMENT_3D ( 'NONE', #42140, #4890, #48385 ) ; +#37533 = FACE_OUTER_BOUND ( 'NONE', #64815, .T. ) ; +#37534 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37535 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880588700, 23.92896305882237900, -28.53160243214819000 ) ) ; +#37536 = CARTESIAN_POINT ( 'NONE', ( 9.904737509656014200, 17.92298334620663500, -28.20555803803009800 ) ) ; +#37537 = CONICAL_SURFACE ( 'NONE', #63993, 10.50000000000009600, 0.7853981633974518300 ) ; +#37538 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528193500, 39.13131911501876200, -28.51286550264508400 ) ) ; +#37539 = CARTESIAN_POINT ( 'NONE', ( 9.997978530266234300, 49.78907435382948400, -28.25433648786267000 ) ) ; +#37540 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747186300, 41.46868088498121800, -28.51286550264512700 ) ) ; +#37541 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#37542 = ORIENTED_EDGE ( 'NONE', *, *, #38297, .T. ) ; +#37543 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274698100, 24.23212903577619000, -28.37244029424743600 ) ) ; +#37545 = ORIENTED_EDGE ( 'NONE', *, *, #51384, .T. ) ; +#37544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37546 = CONICAL_SURFACE ( 'NONE', #77001, 10.50000000000009600, 0.7853981633974500600 ) ; +#37547 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#37548 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 84.37738371066728900, -28.70555803802997700 ) ) ; +#37549 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428576500, 39.07141756547892400, -28.70555803802995200 ) ) ; +#37550 = ORIENTED_EDGE ( 'NONE', *, *, #18749, .T. ) ; +#37551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37552 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60212, #4162, #66456, #29237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672988948400E-007, 0.0007670610367940306900 ), + .UNSPECIFIED. ) ; +#37553 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148632300, 36.00238095238077600, -28.70555803802995200 ) ) ; +#37554 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719593400, 33.15857157145701000, -28.37229765499281000 ) ) ; +#37555 = CARTESIAN_POINT ( 'NONE', ( 3.064555739224958900, 61.50962196508507400, -28.29483400905885300 ) ) ; +#37556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37557 = CONICAL_SURFACE ( 'NONE', #68717, 10.50000000000009600, 0.7853981633974482800 ) ; +#37558 = CONICAL_SURFACE ( 'NONE', #5856, 10.50000000000009600, 0.7853981633974482800 ) ; +#37560 = EDGE_CURVE ( 'NONE', #25204, #11576, #6074, .T. ) ; +#37559 = ORIENTED_EDGE ( 'NONE', *, *, #17833, .T. ) ; +#37561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37562 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37563 = EDGE_CURVE ( 'NONE', #2388, #57688, #37182, .T. ) ; +#37564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37565 = ORIENTED_EDGE ( 'NONE', *, *, #48338, .F. ) ; +#37566 = ORIENTED_EDGE ( 'NONE', *, *, #1334, .T. ) ; +#37567 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801593800, 80.90033558196088800, -28.70555803803014400 ) ) ; +#37568 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999989200, 29.79999999999999000, -28.70555803802995200 ) ) ; +#37569 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550800, 55.46616414991844100, -28.37247596307075200 ) ) ; +#37570 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#37571 = EDGE_CURVE ( 'NONE', #45798, #46801, #4354, .T. ) ; +#37572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15338, #21607, #27871, #71363 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104967207600, 0.0007670610367941894200 ), + .UNSPECIFIED. ) ; +#37574 = EDGE_CURVE ( 'NONE', #43655, #36158, #11935, .T. ) ; +#37575 = CIRCLE ( 'NONE', #74703, 10.00000000000009200 ) ; +#37576 = VERTEX_POINT ( 'NONE', #26096 ) ; +#37577 = EDGE_CURVE ( 'NONE', #43862, #10610, #70669, .T. ) ; +#37578 = ORIENTED_EDGE ( 'NONE', *, *, #43181, .T. ) ; +#37579 = ADVANCED_FACE ( 'NONE', ( #4111 ), #18715, .F. ) ; +#37580 = ORIENTED_EDGE ( 'NONE', *, *, #70857, .T. ) ; +#37581 = EDGE_LOOP ( 'NONE', ( #16456, #42400, #46798 ) ) ; +#37582 = ORIENTED_EDGE ( 'NONE', *, *, #50551, .T. ) ; +#37583 = ADVANCED_FACE ( 'NONE', ( #51764 ), #7817, .T. ) ; +#37584 = FACE_OUTER_BOUND ( 'NONE', #15935, .T. ) ; +#37585 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 37.00000000000001400, -1.205558038030005300 ) ) ; +#37586 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 90.34267608797600200, -28.20555803802997700 ) ) ; +#37587 = CIRCLE ( 'NONE', #62407, 10.00000000000009600 ) ; +#37588 = ORIENTED_EDGE ( 'NONE', *, *, #16200, .T. ) ; +#37589 = ORIENTED_EDGE ( 'NONE', *, *, #7794, .T. ) ; +#37590 = EDGE_CURVE ( 'NONE', #42103, #28772, #56203, .T. ) ; +#37591 = EDGE_CURVE ( 'NONE', #40037, #45369, #41735, .T. ) ; +#37592 = EDGE_CURVE ( 'NONE', #70673, #74974, #27315, .T. ) ; +#37593 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217475100, 61.43945992495532900, -28.34042301926881200 ) ) ; +#37594 = ADVANCED_FACE ( 'NONE', ( #35288 ), #49807, .F. ) ; +#37595 = FACE_OUTER_BOUND ( 'NONE', #77972, .T. ) ; +#37596 = AXIS2_PLACEMENT_3D ( 'NONE', #8093, #20643, #76644 ) ; +#37597 = CARTESIAN_POINT ( 'NONE', ( -2.438065798940674900, 49.61613388835922900, -28.57723500840072400 ) ) ; +#37598 = VERTEX_POINT ( 'NONE', #33131 ) ; +#37599 = CONICAL_SURFACE ( 'NONE', #53241, 10.50000000000009600, 0.7853981633974518300 ) ; +#37600 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66229, #29000, #72482, #35228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656155483200, 0.001302223101366058000 ), + .UNSPECIFIED. ) ; +#37601 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37602 = CIRCLE ( 'NONE', #40772, 10.50000000000009600 ) ; +#37603 = EDGE_CURVE ( 'NONE', #67289, #51473, #12858, .T. ) ; +#37604 = AXIS2_PLACEMENT_3D ( 'NONE', #48960, #80018, #11755 ) ; +#37605 = AXIS2_PLACEMENT_3D ( 'NONE', #7194, #75749, #50718 ) ; +#37606 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37608 = ORIENTED_EDGE ( 'NONE', *, *, #65525, .T. ) ; +#37607 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37609 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#37610 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819073900, 51.65075715145259500, -28.20555803803014100 ) ) ; +#37611 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37612 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 8.333333333333342800, 4.294441961970000500 ) ) ; +#37613 = CARTESIAN_POINT ( 'NONE', ( 17.40084336938094400, 59.90722698763530500, -28.41361853548547200 ) ) ; +#37614 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#37615 = CONICAL_SURFACE ( 'NONE', #41697, 10.50000000000009600, 0.7853981633974482800 ) ; +#37616 = ORIENTED_EDGE ( 'NONE', *, *, #38516, .T. ) ; +#37617 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37618 = FACE_OUTER_BOUND ( 'NONE', #50824, .T. ) ; +#37619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37620 = ORIENTED_EDGE ( 'NONE', *, *, #41658, .T. ) ; +#37621 = EDGE_LOOP ( 'NONE', ( #75146, #985, #43981, #73713 ) ) ; +#37622 = FACE_OUTER_BOUND ( 'NONE', #78849, .T. ) ; +#37623 = AXIS2_PLACEMENT_3D ( 'NONE', #56075, #37551, #74859 ) ; +#37624 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#37625 = ORIENTED_EDGE ( 'NONE', *, *, #69104, .F. ) ; +#37626 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37627 = AXIS2_PLACEMENT_3D ( 'NONE', #48878, #55152, #5403 ) ; +#37628 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 52.97376207875060300, -28.70555803802997700 ) ) ; +#37629 = FACE_OUTER_BOUND ( 'NONE', #41237, .T. ) ; +#37630 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#37631 = CONICAL_SURFACE ( 'NONE', #10499, 10.00000000000009200, 0.7853981633974447300 ) ; +#37632 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 42.83333333333333600, -6.205558038030004800 ) ) ; +#37633 = ORIENTED_EDGE ( 'NONE', *, *, #43896, .F. ) ; +#37634 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#37635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37636 = EDGE_CURVE ( 'NONE', #70202, #36405, #66415, .T. ) ; +#37637 = AXIS2_PLACEMENT_3D ( 'NONE', #14223, #57729, #64019 ) ; +#37638 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939080100, 13.41466791010193300, -28.53910738522641900 ) ) ; +#37639 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#37640 = EDGE_LOOP ( 'NONE', ( #33481, #36222, #40779 ) ) ; +#37641 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#37642 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#37643 = AXIS2_PLACEMENT_3D ( 'NONE', #41877, #4630, #48113 ) ; +#37644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37646 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#37647 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59752, #28782, #72268, #35008 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674237374353900E-007, 0.0007606607323828896000 ), + .UNSPECIFIED. ) ; +#37648 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 80.51916201875670300, -28.45106778992437700 ) ) ; +#37649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37650 = CONICAL_SURFACE ( 'NONE', #76710, 10.00000000000009600, 0.7853981633974447300 ) ; +#37651 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000042600, 68.62623792124929900, -28.70555803803047500 ) ) ; +#37652 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537167900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#37653 = ORIENTED_EDGE ( 'NONE', *, *, #26573, .F. ) ; +#37654 = AXIS2_PLACEMENT_3D ( 'NONE', #47746, #10514, #54016 ) ; +#37655 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#37656 = ORIENTED_EDGE ( 'NONE', *, *, #56037, .F. ) ; +#37657 = ORIENTED_EDGE ( 'NONE', *, *, #41536, .T. ) ; +#37658 = EDGE_LOOP ( 'NONE', ( #33995, #48483, #19493, #78588 ) ) ; +#37659 = CARTESIAN_POINT ( 'NONE', ( -16.68942240455975300, 87.07608412203499900, -28.56336785413097700 ) ) ; +#37660 = EDGE_LOOP ( 'NONE', ( #62375, #51573, #37656 ) ) ; +#37661 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851514300, 13.09761904761874600, -28.70555803803025800 ) ) ; +#37662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37663 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567173200, 9.746602415621898900, -28.20555803802992800 ) ) ; +#37664 = FACE_OUTER_BOUND ( 'NONE', #12792, .T. ) ; +#37665 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180657900, 71.65075715145295000, -28.20555803803014100 ) ) ; +#37666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37667 = ORIENTED_EDGE ( 'NONE', *, *, #7072, .F. ) ; +#37668 = ORIENTED_EDGE ( 'NONE', *, *, #13097, .T. ) ; +#37669 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609170600, 80.13716795162640900, -28.48697406221692000 ) ) ; +#37670 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#37671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37672 = ADVANCED_FACE ( 'NONE', ( #70290 ), #45586, .T. ) ; +#37673 = CIRCLE ( 'NONE', #35173, 10.00000000000009600 ) ; +#37674 = EDGE_CURVE ( 'NONE', #17490, #69759, #79179, .T. ) ; +#37675 = ORIENTED_EDGE ( 'NONE', *, *, #29303, .F. ) ; +#37676 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#37677 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 49.16666666666667100, 9.794441961969994300 ) ) ; +#37678 = EDGE_LOOP ( 'NONE', ( #14648, #28060, #21753, #13421 ) ) ; +#37679 = EDGE_CURVE ( 'NONE', #73096, #35769, #64727, .T. ) ; +#37680 = CARTESIAN_POINT ( 'NONE', ( -16.73584074218854300, 18.67436051799360500, -28.45080305021058800 ) ) ; +#37681 = FACE_OUTER_BOUND ( 'NONE', #42362, .T. ) ; +#37682 = ADVANCED_FACE ( 'NONE', ( #68346 ), #64483, .F. ) ; +#37683 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 14.33333333333335300, -5.535685056952199400 ) ) ; +#37684 = EDGE_CURVE ( 'NONE', #77979, #35501, #50192, .T. ) ; +#37685 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 61.52858243452105600, -28.70555803802997700 ) ) ; +#37686 = ORIENTED_EDGE ( 'NONE', *, *, #26326, .T. ) ; +#37687 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385086600, 20.60677350908850200, -28.30799595738891100 ) ) ; +#37688 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911123700, 81.19833471562199600, -28.28704243186601600 ) ) ; +#37689 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386700, 30.93650294695131500, -28.30782889147482000 ) ) ; +#37690 = EDGE_CURVE ( 'NONE', #75740, #42022, #2134, .T. ) ; +#37691 = EDGE_CURVE ( 'NONE', #37916, #23277, #35774, .T. ) ; +#37692 = VECTOR ( 'NONE', #26051, 1000.000000000000000 ) ; +#37693 = EDGE_LOOP ( 'NONE', ( #51447, #26419, #46166 ) ) ; +#37694 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300882000, 53.19621076493094600, -28.61864990621736000 ) ) ; +#37695 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 16.66666666666667500, 4.294441961969993400 ) ) ; +#37696 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2822, #2544, #27615, #46316 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648281873426800E-007, 0.0004318378175225118400 ), + .UNSPECIFIED. ) ; +#37698 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37699 = ORIENTED_EDGE ( 'NONE', *, *, #33928, .F. ) ; +#37700 = FACE_OUTER_BOUND ( 'NONE', #7987, .T. ) ; +#37701 = AXIS2_PLACEMENT_3D ( 'NONE', #66371, #10330, #72628 ) ; +#37702 = EDGE_CURVE ( 'NONE', #31531, #39227, #16763, .T. ) ; +#37703 = EDGE_CURVE ( 'NONE', #55722, #74451, #21321, .T. ) ; +#37704 = ORIENTED_EDGE ( 'NONE', *, *, #9984, .T. ) ; +#37705 = CARTESIAN_POINT ( 'NONE', ( 11.03590776526159400, 39.00212297965121900, -28.25344967589749600 ) ) ; +#37706 = EDGE_CURVE ( 'NONE', #61855, #59532, #33303, .T. ) ; +#37707 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37708 = ADVANCED_FACE ( 'NONE', ( #204 ), #21711, .T. ) ; +#37709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37710 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37712 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218857500, 40.92563948200643900, -28.45080305021058500 ) ) ; +#37713 = AXIS2_PLACEMENT_3D ( 'NONE', #73654, #36370, #79905 ) ; +#37714 = FACE_OUTER_BOUND ( 'NONE', #63984, .T. ) ; +#37715 = ORIENTED_EDGE ( 'NONE', *, *, #55585, .F. ) ; +#37716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37717 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819190700, 51.65075715145310700, -28.20555803802997700 ) ) ; +#37718 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263700, 28.07379779496234900, -28.70555803802994200 ) ) ; +#37719 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#37720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37721 = CARTESIAN_POINT ( 'NONE', ( -11.57884904549878700, 92.13371821560551200, -28.70555803803002000 ) ) ; +#37722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37723 = ORIENTED_EDGE ( 'NONE', *, *, #6880, .F. ) ; +#37724 = AXIS2_PLACEMENT_3D ( 'NONE', #60613, #73116, #17091 ) ; +#37725 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#37726 = AXIS2_PLACEMENT_3D ( 'NONE', #62644, #68885, #336 ) ; +#37727 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428473500, 70.07141756547855500, -28.70555803803030800 ) ) ; +#37728 = AXIS2_PLACEMENT_3D ( 'NONE', #70574, #33315, #76831 ) ; +#37729 = CIRCLE ( 'NONE', #25948, 10.50000000000009600 ) ; +#37730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37731 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999999999999998200, -28.70555803803001300 ) ) ; +#37732 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274693400, 14.05000000000000200, -28.20555803802992800 ) ) ; +#37733 = CIRCLE ( 'NONE', #60538, 10.50000000000009600 ) ; +#37734 = ORIENTED_EDGE ( 'NONE', *, *, #6252, .F. ) ; +#37735 = ORIENTED_EDGE ( 'NONE', *, *, #55238, .F. ) ; +#37736 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.418457393421038000, -28.68863412692833800 ) ) ; +#37737 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 20.16666666666668600, 0.9380355014189834000 ) ) ; +#37738 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042380900, 11.09027028261017200, -28.70555803803005900 ) ) ; +#37739 = ORIENTED_EDGE ( 'NONE', *, *, #1976, .F. ) ; +#37740 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.87705528805140200, -28.20555803802994200 ) ) ; +#37741 = ORIENTED_EDGE ( 'NONE', *, *, #71943, .F. ) ; +#37742 = ORIENTED_EDGE ( 'NONE', *, *, #60256, .F. ) ; +#37743 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174866200, 80.16054007504448000, -28.34042301926892500 ) ) ; +#37744 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37745 = AXIS2_PLACEMENT_3D ( 'NONE', #11134, #54634, #17384 ) ; +#37747 = ORIENTED_EDGE ( 'NONE', *, *, #71424, .F. ) ; +#37746 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37748 = EDGE_CURVE ( 'NONE', #862, #10617, #6840, .T. ) ; +#37749 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079883000, 39.16616330387869700, -28.27375072930954800 ) ) ; +#37750 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349245900, 30.39456479767167000, -28.70555803802995200 ) ) ; +#37751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37752 = VERTEX_POINT ( 'NONE', #59214 ) ; +#37753 = CONICAL_SURFACE ( 'NONE', #23547, 10.00000000000009200, 0.7853981633974447300 ) ; +#37754 = ORIENTED_EDGE ( 'NONE', *, *, #42238, .F. ) ; +#37755 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#37756 = VERTEX_POINT ( 'NONE', #22227 ) ; +#37758 = EDGE_CURVE ( 'NONE', #56790, #59944, #26545, .T. ) ; +#37757 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6929, #44144, #50403, #13216 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043655800, 0.008406583008691313800 ), + .UNSPECIFIED. ) ; +#37759 = ORIENTED_EDGE ( 'NONE', *, *, #55037, .F. ) ; +#37760 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.22294471194858200, -28.20555803802995200 ) ) ; +#37761 = AXIS2_PLACEMENT_3D ( 'NONE', #66293, #72547, #22755 ) ; +#37762 = CARTESIAN_POINT ( 'NONE', ( -8.705837858217961400, 24.54999999999999700, -28.37136602294620900 ) ) ; +#37763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42218, #17232, #79523, #4981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207934412900E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#37764 = FACE_OUTER_BOUND ( 'NONE', #8763, .T. ) ; +#37765 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142000, 30.96868088498121800, -28.51286550264512000 ) ) ; +#37766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37767 = ORIENTED_EDGE ( 'NONE', *, *, #79924, .T. ) ; +#37768 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#37769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37770 = EDGE_LOOP ( 'NONE', ( #42416, #24271, #200, #22770, #15490 ) ) ; +#37771 = ADVANCED_FACE ( 'NONE', ( #31374 ), #29453, .F. ) ; +#37772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24000, #67492, #30267, #73767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082046110400E-007, 0.001119323292485690600 ), + .UNSPECIFIED. ) ; +#37773 = AXIS2_PLACEMENT_3D ( 'NONE', #71732, #52925, #28243 ) ; +#37774 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567142500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#37775 = CIRCLE ( 'NONE', #71883, 10.50000000000009900 ) ; +#37776 = EDGE_LOOP ( 'NONE', ( #33848, #76393, #31479 ) ) ; +#37777 = ORIENTED_EDGE ( 'NONE', *, *, #31001, .T. ) ; +#37778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37779 = ADVANCED_FACE ( 'NONE', ( #14809 ), #77092, .F. ) ; +#37780 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 63.83333333333332100, 3.794441961969996900 ) ) ; +#37781 = AXIS2_PLACEMENT_3D ( 'NONE', #5640, #49121, #11910 ) ; +#37782 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20055, #57304, #76049, #38766 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061362300E-007, 0.001119323292485656500 ), + .UNSPECIFIED. ) ; +#37783 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 87.94142842854287800, -28.20555803803047800 ) ) ; +#37784 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576918600, 35.05000000000000400, -28.65220501466659200 ) ) ; +#37785 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 28.83333333333333900, 6.794441961969992500 ) ) ; +#37786 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#37787 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654402600, 81.52472935029898300, -28.39317435246130100 ) ) ; +#37788 = EDGE_CURVE ( 'NONE', #20694, #4580, #12879, .T. ) ; +#37789 = CIRCLE ( 'NONE', #18692, 9.500000000000099500 ) ; +#37790 = ADVANCED_FACE ( 'NONE', ( #62495 ), #27475, .F. ) ; +#37791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37792 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#37793 = ADVANCED_FACE ( 'NONE', ( #47873 ), #75143, .T. ) ; +#37794 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 66.16666666666670000, -12.20555803803000000 ) ) ; +#37795 = ORIENTED_EDGE ( 'NONE', *, *, #29125, .F. ) ; +#37796 = ORIENTED_EDGE ( 'NONE', *, *, #35086, .F. ) ; +#37797 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609424100, 51.46283204837338600, -28.48697406221667800 ) ) ; +#37798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24224, #80241, #5719, #49196 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621168500 ), + .UNSPECIFIED. ) ; +#37799 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492445900, 40.89456479767167000, -28.70555803802996700 ) ) ; +#37800 = ADVANCED_FACE ( 'NONE', ( #79064 ), #42027, .F. ) ; +#37801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37802 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 57.92318720225497900, -28.70555803802997700 ) ) ; +#37803 = FACE_OUTER_BOUND ( 'NONE', #72654, .T. ) ; +#37804 = EDGE_LOOP ( 'NONE', ( #569, #52663, #69838, #56023 ) ) ; +#37805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37806 = FACE_OUTER_BOUND ( 'NONE', #2780, .T. ) ; +#37807 = ORIENTED_EDGE ( 'NONE', *, *, #58435, .F. ) ; +#37809 = EDGE_CURVE ( 'NONE', #20451, #37185, #73186, .T. ) ; +#37808 = ORIENTED_EDGE ( 'NONE', *, *, #13746, .T. ) ; +#37810 = EDGE_CURVE ( 'NONE', #25126, #9151, #58701, .T. ) ; +#37811 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703000, 46.48096581827313400, -28.69431509262337300 ) ) ; +#37812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37813 = ORIENTED_EDGE ( 'NONE', *, *, #49722, .T. ) ; +#37814 = CYLINDRICAL_SURFACE ( 'NONE', #14750, 10.00000000000000200 ) ; +#37815 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819088100, 71.65075715145258100, -28.20555803803014100 ) ) ; +#37816 = ORIENTED_EDGE ( 'NONE', *, *, #50205, .T. ) ; +#37817 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#37818 = VERTEX_POINT ( 'NONE', #72813 ) ; +#37819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37820 = EDGE_LOOP ( 'NONE', ( #49625, #4591, #56329, #66340 ) ) ; +#37821 = ORIENTED_EDGE ( 'NONE', *, *, #3284, .T. ) ; +#37822 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495025600, 28.19228657120672200, -28.53891855579989600 ) ) ; +#37823 = ORIENTED_EDGE ( 'NONE', *, *, #24259, .F. ) ; +#37824 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344056900, 28.42298334620768300, -28.20555803802994200 ) ) ; +#37825 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 36.70389005397399300, -28.37519436813177600 ) ) ; +#37826 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 33.17681279774499400, -28.70555803802996700 ) ) ; +#37827 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37828 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37829 = AXIS2_PLACEMENT_3D ( 'NONE', #63697, #32657, #32396 ) ; +#37830 = ORIENTED_EDGE ( 'NONE', *, *, #41177, .T. ) ; +#37831 = EDGE_CURVE ( 'NONE', #58270, #79471, #55684, .T. ) ; +#37832 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281064800, 70.46231468379673400, -28.37082013777818900 ) ) ; +#37833 = EDGE_CURVE ( 'NONE', #29591, #79077, #43955, .T. ) ; +#37834 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#37835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37836 = EDGE_CURVE ( 'NONE', #5932, #55826, #58592, .T. ) ; +#37837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37838 = CONICAL_SURFACE ( 'NONE', #75596, 10.00000000000009400, 0.7853981633974447300 ) ; +#37839 = AXIS2_PLACEMENT_3D ( 'NONE', #37634, #50391, #12665 ) ; +#37840 = VERTEX_POINT ( 'NONE', #23298 ) ; +#37841 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 44.59761904761919000, -28.70555803802996700 ) ) ; +#37842 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985146500, 36.00238095238093900, -28.70555803802995200 ) ) ; +#37843 = ORIENTED_EDGE ( 'NONE', *, *, #19628, .T. ) ; +#37844 = ORIENTED_EDGE ( 'NONE', *, *, #64101, .T. ) ; +#37845 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 61.43650294695131500, -28.30782889147482400 ) ) ; +#37846 = CONICAL_SURFACE ( 'NONE', #70324, 10.00000000000009600, 0.7853981633974482800 ) ; +#37847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37849 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122157000, 20.02667319908792000, -28.37233769390153200 ) ) ; +#37850 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000010200, 9.589561077180745100, -28.52734861045625100 ) ) ; +#37852 = VERTEX_POINT ( 'NONE', #4531 ) ; +#37851 = AXIS2_PLACEMENT_3D ( 'NONE', #55907, #37141, #24925 ) ; +#37853 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530700, 45.55000000000000400, -28.20555803802996700 ) ) ; +#37854 = EDGE_LOOP ( 'NONE', ( #14910, #902, #77733, #3581 ) ) ; +#37855 = CIRCLE ( 'NONE', #20758, 10.00000000000009200 ) ; +#37856 = ORIENTED_EDGE ( 'NONE', *, *, #74363, .F. ) ; +#37857 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#37858 = ORIENTED_EDGE ( 'NONE', *, *, #41980, .T. ) ; +#37859 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 34.83333333333332100, -3.349151577478984600 ) ) ; +#37860 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#37861 = AXIS2_PLACEMENT_3D ( 'NONE', #3816, #47306, #10092 ) ; +#37862 = EDGE_CURVE ( 'NONE', #70072, #62074, #45914, .T. ) ; +#37863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37864 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#37865 = ADVANCED_FACE ( 'NONE', ( #25522 ), #6989, .T. ) ; +#37866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16834, #4314, #66608, #29387 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160291158200, 0.0006028148015511363600 ), + .UNSPECIFIED. ) ; +#37867 = FACE_OUTER_BOUND ( 'NONE', #42762, .T. ) ; +#37868 = EDGE_CURVE ( 'NONE', #38210, #56225, #44191, .T. ) ; +#37869 = CIRCLE ( 'NONE', #25998, 9.500000000000095900 ) ; +#37870 = ORIENTED_EDGE ( 'NONE', *, *, #4201, .F. ) ; +#37871 = AXIS2_PLACEMENT_3D ( 'NONE', #39666, #70668, #45887 ) ; +#37872 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007436600, 10.78032162676581700, -28.55467576046953900 ) ) ; +#37873 = ADVANCED_FACE ( 'NONE', ( #40088 ), #54685, .T. ) ; +#37874 = VERTEX_POINT ( 'NONE', #11343 ) ; +#37875 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25900, #62898, #32139, #75646 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.008791465289788802400, 0.008828470447789544700 ), + .UNSPECIFIED. ) ; +#37876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37877 = CARTESIAN_POINT ( 'NONE', ( -1.283695372222837200E-013, 15.94142842854310700, -28.20555803802992800 ) ) ; +#37878 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458391500, 29.08874248361071600, -28.53740755999534400 ) ) ; +#37879 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 6.166666666666678500, -4.152999154772358800 ) ) ; +#37880 = FACE_OUTER_BOUND ( 'NONE', #41969, .T. ) ; +#37881 = EDGE_LOOP ( 'NONE', ( #71828, #1339, #62128, #51691, #73381 ) ) ; +#37882 = CONICAL_SURFACE ( 'NONE', #32279, 10.00000000000009400, 0.7853981633974447300 ) ; +#37883 = AXIS2_PLACEMENT_3D ( 'NONE', #65675, #34376, #71918 ) ; +#37884 = VERTEX_POINT ( 'NONE', #54824 ) ; +#37885 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339071400, 51.46283204837340700, -28.48697406221673100 ) ) ; +#37886 = ORIENTED_EDGE ( 'NONE', *, *, #21124, .T. ) ; +#37887 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999989900, 80.79999999999968500, -28.20555803803030800 ) ) ; +#37888 = ADVANCED_FACE ( 'NONE', ( #10915 ), #21626, .T. ) ; +#37889 = FACE_OUTER_BOUND ( 'NONE', #30471, .T. ) ; +#37890 = CARTESIAN_POINT ( 'NONE', ( 17.41531457165559600, 90.41631403997796200, -28.40988208712484900 ) ) ; +#37891 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43208, #80503, #12232, #55720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001707792749031740100 ), + .UNSPECIFIED. ) ; +#37892 = ORIENTED_EDGE ( 'NONE', *, *, #63484, .T. ) ; +#37893 = ORIENTED_EDGE ( 'NONE', *, *, #23102, .T. ) ; +#37894 = ORIENTED_EDGE ( 'NONE', *, *, #59163, .T. ) ; +#37895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37896 = ORIENTED_EDGE ( 'NONE', *, *, #78502, .T. ) ; +#37897 = CARTESIAN_POINT ( 'NONE', ( 17.07362509777610200, 5.852458537215270000, -27.80510719842702700 ) ) ; +#37898 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819000, 28.63131911501876900, -28.51286550264507700 ) ) ; +#37899 = VERTEX_POINT ( 'NONE', #67356 ) ; +#37900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37901 = AXIS2_PLACEMENT_3D ( 'NONE', #9873, #34916, #53107 ) ; +#37902 = ORIENTED_EDGE ( 'NONE', *, *, #4146, .F. ) ; +#37903 = CARTESIAN_POINT ( 'NONE', ( -9.279102202939519400, 61.50050326225952800, -28.63287226700114000 ) ) ; +#37904 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57641, #69880, #1607, #20400 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249095000, 0.0008027336008645225500 ), + .UNSPECIFIED. ) ; +#37905 = ADVANCED_FACE ( 'NONE', ( #8918 ), #38116, .T. ) ; +#37906 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37907 = ORIENTED_EDGE ( 'NONE', *, *, #27152, .T. ) ; +#37908 = CIRCLE ( 'NONE', #71944, 10.00000000000009400 ) ; +#37909 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 40.66666666666667900, 3.124568980892192800 ) ) ; +#37910 = ORIENTED_EDGE ( 'NONE', *, *, #22883, .T. ) ; +#37911 = CARTESIAN_POINT ( 'NONE', ( 5.100117264795685800, 45.54999999999999700, -28.53808257741934500 ) ) ; +#37912 = ORIENTED_EDGE ( 'NONE', *, *, #8363, .F. ) ; +#37913 = ORIENTED_EDGE ( 'NONE', *, *, #20457, .T. ) ; +#37914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37915 = ORIENTED_EDGE ( 'NONE', *, *, #56177, .T. ) ; +#37916 = VERTEX_POINT ( 'NONE', #5341 ) ; +#37917 = FACE_OUTER_BOUND ( 'NONE', #40068, .T. ) ; +#37918 = CARTESIAN_POINT ( 'NONE', ( 24.26979450417898600, 100.8697945041774100, -22.72922797357802300 ) ) ; +#37919 = ADVANCED_FACE ( 'NONE', ( #56627 ), #36194, .F. ) ; +#37920 = CARTESIAN_POINT ( 'NONE', ( -12.21669353480419000, 80.79999999999999700, -28.32841359973437900 ) ) ; +#37921 = ORIENTED_EDGE ( 'NONE', *, *, #27746, .T. ) ; +#37922 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 89.94924284854654700, -28.20555803803014400 ) ) ; +#37923 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37925 = ORIENTED_EDGE ( 'NONE', *, *, #53811, .T. ) ; +#37926 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37927 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 81.25732391202375000, -28.20555803803014400 ) ) ; +#37928 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825121300, 51.43945992495515900, -28.34042301926892500 ) ) ; +#37929 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567153600, 20.24660241562189400, -28.20555803802994200 ) ) ; +#37930 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877863900, 39.57332680091207800, -28.37233769390155700 ) ) ; +#37931 = CIRCLE ( 'NONE', #50369, 10.50000000000009600 ) ; +#37932 = ORIENTED_EDGE ( 'NONE', *, *, #56808, .F. ) ; +#37933 = EDGE_CURVE ( 'NONE', #3715, #64320, #69277, .T. ) ; +#37934 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 12.87738371066728100, -28.70555803802994200 ) ) ; +#37935 = ORIENTED_EDGE ( 'NONE', *, *, #26675, .F. ) ; +#37936 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#37937 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 101.5999999999999900, -18.70555803803001300 ) ) ; +#37938 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159814400, 29.90190441413979300, -28.70555803803001600 ) ) ; +#37939 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#37940 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#37941 = CARTESIAN_POINT ( 'NONE', ( 12.29416214178191200, 35.04999999999999700, -28.37136602294632900 ) ) ; +#37942 = EDGE_CURVE ( 'NONE', #47841, #71041, #29830, .T. ) ; +#37943 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.30277574221156600, -28.32715733700494500 ) ) ; +#37944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8575, #39874, #18815, #62345 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137488327400 ), + .UNSPECIFIED. ) ; +#37946 = EDGE_CURVE ( 'NONE', #8567, #53623, #15324, .T. ) ; +#37947 = AXIS2_PLACEMENT_3D ( 'NONE', #24480, #30744, #61763 ) ; +#37948 = CONICAL_SURFACE ( 'NONE', #73505, 10.50000000000009200, 0.7853981633974482800 ) ; +#37949 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 47.00000000000001400, -12.20555803803000200 ) ) ; +#37950 = ORIENTED_EDGE ( 'NONE', *, *, #64423, .F. ) ; +#37951 = ORIENTED_EDGE ( 'NONE', *, *, #53597, .F. ) ; +#37952 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 12.16666666666667300, 3.794441961969996900 ) ) ; +#37953 = AXIS2_PLACEMENT_3D ( 'NONE', #60216, #66458, #16680 ) ; +#37954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37955 = EDGE_CURVE ( 'NONE', #15824, #8089, #842, .T. ) ; +#37956 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#37957 = EDGE_CURVE ( 'NONE', #68070, #14216, #67186, .T. ) ; +#37958 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#37959 = AXIS2_PLACEMENT_3D ( 'NONE', #28582, #65823, #16031 ) ; +#37960 = CONICAL_SURFACE ( 'NONE', #10701, 10.50000000000009200, 0.7853981633974482800 ) ; +#37961 = EDGE_LOOP ( 'NONE', ( #18039, #17975, #22702, #44870 ) ) ; +#37962 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188001000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#37963 = ORIENTED_EDGE ( 'NONE', *, *, #4004, .F. ) ; +#37964 = ORIENTED_EDGE ( 'NONE', *, *, #15572, .T. ) ; +#37965 = CONICAL_SURFACE ( 'NONE', #79815, 10.00000000000009200, 0.7853981633974447300 ) ; +#37966 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534556900, 30.10079448659600100, -28.70555803802995200 ) ) ; +#37967 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 14.50000000000000400, -9.258116921287651700 ) ) ; +#37968 = ORIENTED_EDGE ( 'NONE', *, *, #23450, .T. ) ; +#37969 = AXIS2_PLACEMENT_3D ( 'NONE', #38546, #1313, #44790 ) ; +#37970 = ORIENTED_EDGE ( 'NONE', *, *, #52198, .T. ) ; +#37971 = ORIENTED_EDGE ( 'NONE', *, *, #12953, .F. ) ; +#37972 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195349300, 17.68365405593801000, -28.35038903107273700 ) ) ; +#37973 = ORIENTED_EDGE ( 'NONE', *, *, #64972, .F. ) ; +#37975 = ORIENTED_EDGE ( 'NONE', *, *, #69415, .F. ) ; +#37974 = EDGE_CURVE ( 'NONE', #30748, #66219, #52720, .T. ) ; +#37976 = AXIS2_PLACEMENT_3D ( 'NONE', #7799, #51288, #14084 ) ; +#37977 = AXIS2_PLACEMENT_3D ( 'NONE', #53182, #15939, #59466 ) ; +#37978 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59517, #15990, #72034, #34769 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569587707300E-007, 0.0007596410370203568600 ), + .UNSPECIFIED. ) ; +#37979 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465416400, 29.49920551340399300, -28.70555803802994200 ) ) ; +#37980 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37981 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 63.65857157145693200, -28.20555803802997700 ) ) ; +#37982 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123095300, 39.78860447109612900, -28.53900456328625900 ) ) ; +#37983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37984 = FACE_OUTER_BOUND ( 'NONE', #65753, .T. ) ; +#37985 = ORIENTED_EDGE ( 'NONE', *, *, #15497, .T. ) ; +#37986 = VERTEX_POINT ( 'NONE', #5886 ) ; +#37987 = ADVANCED_FACE ( 'NONE', ( #23555 ), #50753, .F. ) ; +#37988 = ORIENTED_EDGE ( 'NONE', *, *, #28910, .T. ) ; +#37989 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019288400, 66.79999999999944300, -28.70555803803047500 ) ) ; +#37990 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52134, #8632, #21185, #64714, #27451, #70928 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003203200, 0.004118671204006406400 ), + .UNSPECIFIED. ) ; +#37991 = EDGE_LOOP ( 'NONE', ( #49180, #5946, #54224, #25855, #9198 ) ) ; +#37992 = ORIENTED_EDGE ( 'NONE', *, *, #1959, .F. ) ; +#37993 = AXIS2_PLACEMENT_3D ( 'NONE', #76500, #39507, #2238 ) ; +#37994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37995 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192778600, 76.79999999999982700, -28.70555803803030800 ) ) ; +#37996 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753700, 28.07379779496241300, -28.70555803802994200 ) ) ; +#37997 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37998 = ADVANCED_FACE ( 'NONE', ( #3086 ), #18653, .T. ) ; +#37999 = FACE_OUTER_BOUND ( 'NONE', #38339, .T. ) ; +#38000 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.63556610137281700, -28.54207364681942500 ) ) ; +#38001 = ORIENTED_EDGE ( 'NONE', *, *, #36056, .T. ) ; +#38002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38003 = ADVANCED_FACE ( 'NONE', ( #5044 ), #31181, .T. ) ; +#38004 = ORIENTED_EDGE ( 'NONE', *, *, #59322, .F. ) ; +#38005 = CARTESIAN_POINT ( 'NONE', ( -10.07349692871593700, 51.37839075872577900, -28.29547734244344800 ) ) ; +#38007 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609824300, 51.46283204837368400, -28.48697406221626200 ) ) ; +#38006 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.73796787468680200, -28.38801640354855500 ) ) ; +#38008 = AXIS2_PLACEMENT_3D ( 'NONE', #17653, #79931, #30439 ) ; +#38009 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654669400, 81.32559822014187000, -28.29986836858022800 ) ) ; +#38010 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 18.00000000000001400, -1.205558038030005300 ) ) ; +#38011 = CIRCLE ( 'NONE', #846, 10.00000000000009400 ) ; +#38012 = VERTEX_POINT ( 'NONE', #68420 ) ; +#38013 = ORIENTED_EDGE ( 'NONE', *, *, #26109, .F. ) ; +#38014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38015 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660979200, 60.13716795162655200, -28.48697406221649300 ) ) ; +#38016 = AXIS2_PLACEMENT_3D ( 'NONE', #25894, #7353, #69383 ) ; +#38017 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#38018 = EDGE_CURVE ( 'NONE', #78760, #36921, #19660, .T. ) ; +#38019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38020 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 89.77559325427189700, -28.45987523529578700 ) ) ; +#38021 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38022 = AXIS2_PLACEMENT_3D ( 'NONE', #33552, #77068, #39803 ) ; +#38023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38024 = ORIENTED_EDGE ( 'NONE', *, *, #10665, .F. ) ; +#38025 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#38026 = ORIENTED_EDGE ( 'NONE', *, *, #8641, .F. ) ; +#38027 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38028 = ORIENTED_EDGE ( 'NONE', *, *, #60158, .F. ) ; +#38029 = CARTESIAN_POINT ( 'NONE', ( 8.899882735204323900, 24.55000000000000100, -28.53808257741931700 ) ) ; +#38030 = CARTESIAN_POINT ( 'NONE', ( -10.02315967650650600, 31.01912043132465500, -28.30223257055582000 ) ) ; +#38031 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274714700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#38032 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 27.12623792124938800, -28.70555803802994200 ) ) ; +#38033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77051, #43459, #24991, #68508 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.536890596062305800E-017, 0.001333132141655093100 ), + .UNSPECIFIED. ) ; +#38034 = CIRCLE ( 'NONE', #75261, 9.500000000000099500 ) ; +#38035 = ORIENTED_EDGE ( 'NONE', *, *, #2439, .F. ) ; +#38036 = ORIENTED_EDGE ( 'NONE', *, *, #60942, .F. ) ; +#38037 = EDGE_CURVE ( 'NONE', #25185, #4381, #73205, .T. ) ; +#38038 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38039 = FACE_OUTER_BOUND ( 'NONE', #20863, .T. ) ; +#38040 = EDGE_CURVE ( 'NONE', #48190, #42577, #52695, .T. ) ; +#38041 = VERTEX_POINT ( 'NONE', #31446 ) ; +#38042 = VERTEX_POINT ( 'NONE', #12687 ) ; +#38043 = ORIENTED_EDGE ( 'NONE', *, *, #9473, .T. ) ; +#38044 = ORIENTED_EDGE ( 'NONE', *, *, #80372, .F. ) ; +#38045 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 61.66666666666668600, -5.535685056952199400 ) ) ; +#38046 = CONICAL_SURFACE ( 'NONE', #17164, 10.00000000000009200, 0.7853981633974447300 ) ; +#38047 = EDGE_CURVE ( 'NONE', #18877, #69758, #38226, .T. ) ; +#38048 = CARTESIAN_POINT ( 'NONE', ( 1.899882735204323500, 14.05000000000000800, -28.53808257741930300 ) ) ; +#38049 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 26.66666666666667100, -8.133761268305512700 ) ) ; +#38050 = EDGE_CURVE ( 'NONE', #49395, #16677, #23810, .T. ) ; +#38051 = EDGE_LOOP ( 'NONE', ( #1112, #78774, #55910, #27269 ) ) ; +#38052 = FACE_OUTER_BOUND ( 'NONE', #7870, .T. ) ; +#38053 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38054 = ORIENTED_EDGE ( 'NONE', *, *, #39741, .F. ) ; +#38055 = EDGE_LOOP ( 'NONE', ( #19289, #79078, #29732 ) ) ; +#38056 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#38057 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050758100, 17.57379779496243800, -28.70555803802992800 ) ) ; +#38058 = ORIENTED_EDGE ( 'NONE', *, *, #40589, .T. ) ; +#38059 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 64.00000000000000000, 9.794441961969996100 ) ) ; +#38060 = VERTEX_POINT ( 'NONE', #50408 ) ; +#38061 = ORIENTED_EDGE ( 'NONE', *, *, #73986, .T. ) ; +#38062 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35566, #72818, #4534, #48012 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799250230000E-007, 0.0005050252131287626700 ), + .UNSPECIFIED. ) ; +#38063 = ORIENTED_EDGE ( 'NONE', *, *, #76408, .F. ) ; +#38064 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38066 = CONICAL_SURFACE ( 'NONE', #53971, 10.00000000000009200, 0.7853981633974447300 ) ; +#38067 = AXIS2_PLACEMENT_3D ( 'NONE', #39533, #70808, #58042 ) ; +#38068 = EDGE_CURVE ( 'NONE', #78429, #37317, #71236, .T. ) ; +#38069 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38070 = EDGE_CURVE ( 'NONE', #75603, #77573, #67338, .T. ) ; +#38071 = EDGE_CURVE ( 'NONE', #12775, #7843, #17709, .T. ) ; +#38072 = ADVANCED_FACE ( 'NONE', ( #34247 ), #63457, .F. ) ; +#38073 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428587200, 51.52858243452104900, -28.70555803802997700 ) ) ; +#38074 = ORIENTED_EDGE ( 'NONE', *, *, #77896, .T. ) ; +#38075 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455814100, 81.52472935029891200, -28.39317435246146800 ) ) ; +#38076 = AXIS2_PLACEMENT_3D ( 'NONE', #17249, #41987, #60779 ) ; +#38077 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 20.96823913367203900, -28.70555803802995200 ) ) ; +#38078 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38079 = CIRCLE ( 'NONE', #65475, 10.00000000000009200 ) ; +#38080 = VERTEX_POINT ( 'NONE', #32231 ) ; +#38081 = CARTESIAN_POINT ( 'NONE', ( -16.99797853026622400, 28.78907435382948800, -28.25433648786264500 ) ) ; +#38082 = CARTESIAN_POINT ( 'NONE', ( 9.819172343672439900, 9.542716366279794500, -28.36017162544768800 ) ) ; +#38083 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29582, #66818, #79330, #42037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206595264800E-005, 0.001076779618376409000 ), + .UNSPECIFIED. ) ; +#38084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38085 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 80.34267608797617300, -28.20555803803014400 ) ) ; +#38086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38087 = EDGE_CURVE ( 'NONE', #55877, #71715, #9307, .T. ) ; +#38088 = CARTESIAN_POINT ( 'NONE', ( -3.935438998026854900, 51.50961459723760100, -28.29483879644633900 ) ) ; +#38089 = ADVANCED_FACE ( 'NONE', ( #48804 ), #30371, .T. ) ; +#38090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38091 = AXIS2_PLACEMENT_3D ( 'NONE', #36632, #80167, #42883 ) ; +#38092 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471817200, 18.13131911501876200, -28.51286550264506700 ) ) ; +#38093 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 70.69966441803892100, -28.70555803802997700 ) ) ; +#38094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38095 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38097 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 90.13716795162648100, -28.48697406221665300 ) ) ; +#38098 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 9.968680884981225200, -28.51286550264508800 ) ) ; +#38099 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 67.50000000000002800, -7.061964498581016200 ) ) ; +#38100 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469300, 14.05000000000000600, -28.20555803802992800 ) ) ; +#38101 = ORIENTED_EDGE ( 'NONE', *, *, #49123, .T. ) ; +#38102 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38103 = ORIENTED_EDGE ( 'NONE', *, *, #53615, .F. ) ; +#38104 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38106 = AXIS2_PLACEMENT_3D ( 'NONE', #35564, #41775, #72811 ) ; +#38107 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466641400, 9.268939712914631800, -28.57333386111658400 ) ) ; +#38108 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 73.65857157145693200, -28.20555803802997700 ) ) ; +#38110 = ADVANCED_FACE ( 'NONE', ( #1128 ), #78033, .T. ) ; +#38109 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74158, #18381, #37112, #80657 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185006500, 0.001517199873936116100 ), + .UNSPECIFIED. ) ; +#38111 = CIRCLE ( 'NONE', #54880, 10.00000000000009400 ) ; +#38112 = ORIENTED_EDGE ( 'NONE', *, *, #22400, .F. ) ; +#38113 = ORIENTED_EDGE ( 'NONE', *, *, #72518, .T. ) ; +#38115 = EDGE_CURVE ( 'NONE', #31077, #15447, #15750, .T. ) ; +#38114 = ORIENTED_EDGE ( 'NONE', *, *, #68707, .F. ) ; +#38116 = CYLINDRICAL_SURFACE ( 'NONE', #55727, 10.00000000000000200 ) ; +#38117 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#38118 = ORIENTED_EDGE ( 'NONE', *, *, #41771, .F. ) ; +#38119 = AXIS2_PLACEMENT_3D ( 'NONE', #5649, #49132, #11916 ) ; +#38120 = ORIENTED_EDGE ( 'NONE', *, *, #31909, .T. ) ; +#38121 = ORIENTED_EDGE ( 'NONE', *, *, #40946, .F. ) ; +#38122 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 32.66666666666667900, 2.794441961969992100 ) ) ; +#38123 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841332300, 90.16349705304836000, -28.30782889147497600 ) ) ; +#38124 = ORIENTED_EDGE ( 'NONE', *, *, #80166, .T. ) ; +#38125 = AXIS2_PLACEMENT_3D ( 'NONE', #44940, #7706, #51193 ) ; +#38126 = FACE_OUTER_BOUND ( 'NONE', #28601, .T. ) ; +#38127 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#38128 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542400, 30.10079448659600500, -28.70555803802995200 ) ) ; +#38129 = ORIENTED_EDGE ( 'NONE', *, *, #39189, .T. ) ; +#38130 = ORIENTED_EDGE ( 'NONE', *, *, #21182, .T. ) ; +#38131 = CONICAL_SURFACE ( 'NONE', #9233, 10.50000000000009600, 0.7853981633974500600 ) ; +#38132 = ORIENTED_EDGE ( 'NONE', *, *, #77668, .T. ) ; +#38133 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 69.91070809551060000, -28.20555803802997700 ) ) ; +#38134 = ORIENTED_EDGE ( 'NONE', *, *, #47583, .F. ) ; +#38135 = ORIENTED_EDGE ( 'NONE', *, *, #72770, .T. ) ; +#38136 = EDGE_LOOP ( 'NONE', ( #46556, #8310, #31635 ) ) ; +#38137 = ORIENTED_EDGE ( 'NONE', *, *, #73368, .F. ) ; +#38138 = CIRCLE ( 'NONE', #42908, 9.500000000000095900 ) ; +#38139 = ORIENTED_EDGE ( 'NONE', *, *, #9249, .T. ) ; +#38140 = CONICAL_SURFACE ( 'NONE', #37761, 10.50000000000009600, 0.7853981633974482800 ) ; +#38141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38142 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000048000, 18.36203212531224300, -28.38801640354843800 ) ) ; +#38143 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 4.000000000000006200, -1.205558038030002800 ) ) ; +#38144 = VERTEX_POINT ( 'NONE', #38712 ) ; +#38145 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#38146 = EDGE_CURVE ( 'NONE', #33939, #6616, #75644, .T. ) ; +#38147 = CONICAL_SURFACE ( 'NONE', #40902, 10.00000000000009600, 0.7853981633974482800 ) ; +#38148 = ORIENTED_EDGE ( 'NONE', *, *, #59261, .T. ) ; +#38149 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666200, 71.46283204837337200, -28.48697406221659600 ) ) ; +#38150 = EDGE_CURVE ( 'NONE', #27817, #29509, #61219, .T. ) ; +#38151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71639, #77888, #22128, #65667 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.245905485348462400E-017, 0.002676326193402436100 ), + .UNSPECIFIED. ) ; +#38152 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38153 = CARTESIAN_POINT ( 'NONE', ( 18.51119784546559200, 2.977237991460444500, -25.82614619879530300 ) ) ; +#38154 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38156 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 27.12623792124938000, -28.70555803802994200 ) ) ; +#38157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38158 = EDGE_CURVE ( 'NONE', #15598, #462, #32294, .T. ) ; +#38159 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 37.62623792124939100, -28.70555803802995200 ) ) ; +#38160 = ADVANCED_FACE ( 'NONE', ( #13813 ), #11857, .T. ) ; +#38161 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 10.28933626866497200, -28.53923937255169500 ) ) ; +#38162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38164 = EDGE_CURVE ( 'NONE', #80445, #63152, #46695, .T. ) ; +#38165 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 38.50000000000000000, -4.865812075874393000 ) ) ; +#38166 = EDGE_CURVE ( 'NONE', #7754, #12346, #65432, .T. ) ; +#38167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38168 = ORIENTED_EDGE ( 'NONE', *, *, #57666, .T. ) ; +#38169 = EDGE_LOOP ( 'NONE', ( #49919, #72756, #50981 ) ) ; +#38170 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#38171 = CARTESIAN_POINT ( 'NONE', ( 19.05713977887430800, 99.71427955774909400, -24.57775787457192300 ) ) ; +#38172 = ADVANCED_FACE ( 'NONE', ( #28443 ), #42967, .T. ) ; +#38173 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#38174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38175 = AXIS2_PLACEMENT_3D ( 'NONE', #45228, #7984, #51483 ) ; +#38176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38177 = EDGE_CURVE ( 'NONE', #76162, #65491, #32266, .T. ) ; +#38178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38179 = EDGE_CURVE ( 'NONE', #51121, #79524, #44884, .T. ) ; +#38180 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#38181 = EDGE_CURVE ( 'NONE', #44409, #9036, #17820, .T. ) ; +#38182 = ORIENTED_EDGE ( 'NONE', *, *, #65196, .F. ) ; +#38183 = FACE_OUTER_BOUND ( 'NONE', #42437, .T. ) ; +#38184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38185 = ORIENTED_EDGE ( 'NONE', *, *, #52734, .T. ) ; +#38186 = CONICAL_SURFACE ( 'NONE', #13365, 10.50000000000009600, 0.7853981633974500600 ) ; +#38187 = ORIENTED_EDGE ( 'NONE', *, *, #39267, .T. ) ; +#38188 = AXIS2_PLACEMENT_3D ( 'NONE', #54834, #79608, #11348 ) ; +#38189 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#38190 = ADVANCED_FACE ( 'NONE', ( #79991 ), #57574, .T. ) ; +#38191 = ADVANCED_FACE ( 'NONE', ( #76063 ), #24494, .F. ) ; +#38192 = ORIENTED_EDGE ( 'NONE', *, *, #21061, .F. ) ; +#38193 = CONICAL_SURFACE ( 'NONE', #64283, 10.00000000000009600, 0.7853981633974447300 ) ; +#38194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38196 = ORIENTED_EDGE ( 'NONE', *, *, #18407, .F. ) ; +#38195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38197 = ORIENTED_EDGE ( 'NONE', *, *, #70961, .F. ) ; +#38198 = CARTESIAN_POINT ( 'NONE', ( 10.87858748549984100, 51.76337688193807200, -28.37223523914928300 ) ) ; +#38199 = AXIS2_PLACEMENT_3D ( 'NONE', #20753, #64296, #27021 ) ; +#38200 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310704100, 80.10230989102886700, -28.61774594594300300 ) ) ; +#38201 = VERTEX_POINT ( 'NONE', #2807 ) ; +#38202 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877867000, 29.07332680091207800, -28.37233769390153900 ) ) ; +#38203 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#38204 = AXIS2_PLACEMENT_3D ( 'NONE', #5834, #49309, #12090 ) ; +#38205 = CONICAL_SURFACE ( 'NONE', #1416, 10.50000000000009800, 0.7853981633974518300 ) ; +#38207 = ADVANCED_FACE ( 'NONE', ( #61511 ), #71098, .T. ) ; +#38206 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5720, #80242, #11982, #55481 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764781222596600E-007, 0.0009376791149929568500 ), + .UNSPECIFIED. ) ; +#38208 = ORIENTED_EDGE ( 'NONE', *, *, #39300, .F. ) ; +#38209 = FACE_OUTER_BOUND ( 'NONE', #71, .T. ) ; +#38210 = VERTEX_POINT ( 'NONE', #40078 ) ; +#38211 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 44.83333333333333600, 9.794441961969999600 ) ) ; +#38212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53945, #10444, #66472, #29261 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962237538100, 0.0005195704752300855500 ), + .UNSPECIFIED. ) ; +#38213 = ORIENTED_EDGE ( 'NONE', *, *, #71176, .T. ) ; +#38214 = ORIENTED_EDGE ( 'NONE', *, *, #74110, .F. ) ; +#38215 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#38216 = FACE_OUTER_BOUND ( 'NONE', #15016, .T. ) ; +#38217 = VERTEX_POINT ( 'NONE', #65144 ) ; +#38218 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2569, #8813, #64913, #27641 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710583081700E-007, 0.0008482615949373525300 ), + .UNSPECIFIED. ) ; +#38219 = FACE_OUTER_BOUND ( 'NONE', #75784, .T. ) ; +#38220 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 10.00000000000001100, -6.205558038030003100 ) ) ; +#38221 = AXIS2_PLACEMENT_3D ( 'NONE', #52590, #15363, #58865 ) ; +#38222 = CONICAL_SURFACE ( 'NONE', #4451, 10.50000000000009600, 0.7853981633974500600 ) ; +#38223 = CARTESIAN_POINT ( 'NONE', ( -16.57123091997350900, 81.47225659168403000, -28.53062721603924600 ) ) ; +#38224 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804073200, 12.15857157145700600, -28.37229765499279200 ) ) ; +#38225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#38227 = ORIENTED_EDGE ( 'NONE', *, *, #60871, .F. ) ; +#38226 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12940, #19185, #68951, #31712 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206652101400E-005, 0.001076779618376923800 ), + .UNSPECIFIED. ) ; +#38228 = ORIENTED_EDGE ( 'NONE', *, *, #38732, .F. ) ; +#38229 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 58.17143691309408400, -28.36981695106780800 ) ) ; +#38230 = FACE_OUTER_BOUND ( 'NONE', #28588, .T. ) ; +#38231 = ORIENTED_EDGE ( 'NONE', *, *, #17161, .T. ) ; +#38232 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999551000, 51.61077422949652100, -28.37255355648645100 ) ) ; +#38233 = EDGE_CURVE ( 'NONE', #5959, #6871, #46860, .T. ) ; +#38234 = CONICAL_SURFACE ( 'NONE', #66476, 10.50000000000009600, 0.7853981633974500600 ) ; +#38235 = AXIS2_PLACEMENT_3D ( 'NONE', #69140, #25914, #75406 ) ; +#38236 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38238 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865853500, 30.68727262089430100, -28.28853693900642000 ) ) ; +#38239 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38241 = AXIS2_PLACEMENT_3D ( 'NONE', #2071, #51559, #39335 ) ; +#38242 = CARTESIAN_POINT ( 'NONE', ( 15.63200844836982700, 92.86401692075458000, -28.62535009469199200 ) ) ; +#38243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38244 = CARTESIAN_POINT ( 'NONE', ( -19.70313306247966200, 0.5937334653534794800, -22.10083875562623800 ) ) ; +#38245 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66174, #59916, #16397, #72434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388532077300E-007, 0.0007987676590766542900 ), + .UNSPECIFIED. ) ; +#38246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38247 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38248 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38250 = ORIENTED_EDGE ( 'NONE', *, *, #38883, .T. ) ; +#38249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38251 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 90.69966441803875100, -28.70555803802997700 ) ) ; +#38252 = AXIS2_PLACEMENT_3D ( 'NONE', #70508, #20759, #39220 ) ; +#38253 = EDGE_LOOP ( 'NONE', ( #33529, #5250, #68049 ) ) ; +#38254 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #51464, #63773, #64046 ), + ( #26772, #70259, #33008 ), + ( #76511, #39245, #1984 ), + ( #45469, #8224, #51727 ), + ( #14518, #58029, #20781 ), + ( #64318, #27046, #70531 ), + ( #33279, #76786, #39522 ), + ( #2249, #45745, #8497 ), + ( #52000, #14781, #58296 ), + ( #21054, #64587, #27319 ), + ( #70801, #33542, #77062 ), + ( #39790, #2509, #46027 ), + ( #8764, #52272, #15048 ), + ( #58560, #21325, #64852 ), + ( #27584, #71071, #33818 ), + ( #77330, #40060, #2777 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.141592653589793100, 3.326076607702222800, 3.510560561814652500, 3.695044515927081700, 3.879528470039511400, 4.064012424151941100, 4.248496378264370300, 4.617464286489229700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070791747819835700, 1.000000000000000000), + ( 1.000000000000000000, 0.7111929068709389500, 1.000000000000000000), + ( 1.000000000000000000, 0.7266179049923230400, 1.000000000000000000), + ( 1.000000000000000000, 0.7379288426924370800, 1.000000000000000000), + ( 1.000000000000000000, 0.7654477440270011100, 1.000000000000000000), + ( 1.000000000000000000, 0.7816266199753283400, 1.000000000000000000), + ( 1.000000000000000000, 0.8160489695658583700, 1.000000000000000000), + ( 1.000000000000000000, 0.8342769553577061800, 1.000000000000000000), + ( 1.000000000000000000, 0.8701929910407556500, 1.000000000000000000), + ( 1.000000000000000000, 0.8878763461558574200, 1.000000000000000000), + ( 1.000000000000000000, 0.9206108609225329700, 1.000000000000000000), + ( 1.000000000000000000, 0.9356619584782377400, 1.000000000000000000), + ( 1.000000000000000000, 0.9745709972570929500, 1.000000000000000000), + ( 1.000000000000000000, 0.9920621202393834500, 1.000000000000000000), + ( 1.000000000000000000, 0.9977515558036765800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#38255 = ADVANCED_FACE ( 'NONE', ( #26470 ), #39051, .F. ) ; +#38256 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416070000, 39.58874248361070900, -28.53740755999534800 ) ) ; +#38257 = CONICAL_SURFACE ( 'NONE', #14156, 10.00000000000009200, 0.7853981633974447300 ) ; +#38258 = EDGE_LOOP ( 'NONE', ( #58594, #2899, #37566 ) ) ; +#38259 = CIRCLE ( 'NONE', #5483, 10.00000000000009200 ) ; +#38261 = EDGE_CURVE ( 'NONE', #7754, #70245, #3323, .T. ) ; +#38260 = ORIENTED_EDGE ( 'NONE', *, *, #28719, .F. ) ; +#38262 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 15.83333333333334300, -3.349151577478984600 ) ) ; +#38263 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#38264 = CARTESIAN_POINT ( 'NONE', ( 17.24584322970067200, 60.70681957915906000, -28.45010557050480000 ) ) ; +#38265 = CIRCLE ( 'NONE', #38125, 10.50000000000009600 ) ; +#38266 = ORIENTED_EDGE ( 'NONE', *, *, #66726, .F. ) ; +#38267 = ORIENTED_EDGE ( 'NONE', *, *, #75888, .F. ) ; +#38268 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819507300, 81.65075715145330500, -28.20555803802997700 ) ) ; +#38269 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 30.74660241562181500, -28.20555803802995200 ) ) ; +#38270 = ADVANCED_FACE ( 'NONE', ( #72208 ), #5997, .T. ) ; +#38271 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091597500, 22.07425125164784100, -28.70555803803001300 ) ) ; +#38272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38273 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#38274 = CIRCLE ( 'NONE', #63387, 10.00000000000009200 ) ; +#38275 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155229900, 55.80000000000015300, -28.20555803803030800 ) ) ; +#38276 = EDGE_LOOP ( 'NONE', ( #15988, #53867, #53530 ) ) ; +#38277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38278 = CARTESIAN_POINT ( 'NONE', ( -4.469863111190365500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#38279 = EDGE_CURVE ( 'NONE', #47046, #63152, #22545, .T. ) ; +#38280 = CIRCLE ( 'NONE', #1850, 5.000000000000000900 ) ; +#38281 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38282 = EDGE_CURVE ( 'NONE', #52565, #40091, #69651, .T. ) ; +#38283 = EDGE_LOOP ( 'NONE', ( #63566, #80026, #29815 ) ) ; +#38284 = ADVANCED_FACE ( 'NONE', ( #74148 ), #37105, .T. ) ; +#38285 = ORIENTED_EDGE ( 'NONE', *, *, #76842, .F. ) ; +#38286 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 15.92318720225497800, -28.70555803802992800 ) ) ; +#38287 = VERTEX_POINT ( 'NONE', #40897 ) ; +#38288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#38289 = ORIENTED_EDGE ( 'NONE', *, *, #61691, .F. ) ; +#38290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38291 = CONICAL_SURFACE ( 'NONE', #34592, 10.00000000000009600, 0.7853981633974482800 ) ; +#38292 = EDGE_LOOP ( 'NONE', ( #61526, #29085, #74710, #48213 ) ) ; +#38293 = EDGE_CURVE ( 'NONE', #39034, #54615, #55191, .T. ) ; +#38294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38295 = EDGE_CURVE ( 'NONE', #38457, #39079, #70207, .T. ) ; +#38296 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 60.34267608797551900, -28.20555803803047800 ) ) ; +#38297 = EDGE_CURVE ( 'NONE', #75712, #63837, #7923, .T. ) ; +#38298 = ADVANCED_FACE ( 'NONE', ( #41034 ), #51680, .F. ) ; +#38299 = ORIENTED_EDGE ( 'NONE', *, *, #51113, .F. ) ; +#38300 = EDGE_CURVE ( 'NONE', #19028, #44803, #68269, .T. ) ; +#38301 = AXIS2_PLACEMENT_3D ( 'NONE', #53588, #16339, #59864 ) ; +#38302 = EDGE_LOOP ( 'NONE', ( #25847, #48209, #60970, #20749, #13258, #22719, #75095 ) ) ; +#38303 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189967800, 41.97636006919954400, -28.38670679782195400 ) ) ; +#38304 = EDGE_LOOP ( 'NONE', ( #17154, #43148, #14756 ) ) ; +#38305 = CIRCLE ( 'NONE', #66950, 9.500000000000095900 ) ; +#38306 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 81.25732391202386400, -28.20555803803014400 ) ) ; +#38307 = ADVANCED_FACE ( 'NONE', ( #4038 ), #2062, .T. ) ; +#38308 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 59.50000000000002100, 2.454695999814385600 ) ) ; +#38309 = AXIS2_PLACEMENT_3D ( 'NONE', #11118, #54614, #17362 ) ; +#38310 = AXIS2_PLACEMENT_3D ( 'NONE', #47238, #28832, #59809 ) ; +#38311 = CARTESIAN_POINT ( 'NONE', ( -10.36059854261446500, 18.16749699759768800, -28.25434854811486900 ) ) ; +#38312 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38313 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#38314 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 24.50000000000001800, 4.650848422521016300 ) ) ; +#38315 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8583, #45831, #21143, #64664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207918752900E-007, 0.0008724366121409661500 ), + .UNSPECIFIED. ) ; +#38316 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290090400, 41.53732497909459200, -28.41043597897467500 ) ) ; +#38317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38318 = CIRCLE ( 'NONE', #75808, 10.50000000000009600 ) ; +#38319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38320 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 61.83333333333334300, -12.20555803803000600 ) ) ; +#38321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38322 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#38323 = ORIENTED_EDGE ( 'NONE', *, *, #63262, .T. ) ; +#38324 = AXIS2_PLACEMENT_3D ( 'NONE', #69652, #32407, #75909 ) ; +#38325 = EDGE_CURVE ( 'NONE', #4132, #29208, #40735, .T. ) ; +#38326 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6358, #43595, #49842, #12633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810941700, 0.0005317208426588660400 ), + .UNSPECIFIED. ) ; +#38327 = ORIENTED_EDGE ( 'NONE', *, *, #70124, .F. ) ; +#38328 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#38329 = EDGE_LOOP ( 'NONE', ( #75078, #22419, #2718, #78206 ) ) ; +#38330 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252842800, 28.63131911501858400, -28.51286550264480000 ) ) ; +#38331 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027366200, 62.22511094383831000, -28.55192314908413200 ) ) ; +#38332 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701868900, 85.79999999999998300, -28.70555803802997700 ) ) ; +#38333 = CONICAL_SURFACE ( 'NONE', #22974, 10.00000000000009400, 0.7853981633974447300 ) ; +#38334 = VERTEX_POINT ( 'NONE', #29251 ) ; +#38335 = FACE_OUTER_BOUND ( 'NONE', #62919, .T. ) ; +#38336 = ORIENTED_EDGE ( 'NONE', *, *, #34284, .F. ) ; +#38337 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38338 = EDGE_CURVE ( 'NONE', #37598, #29460, #26309, .T. ) ; +#38339 = EDGE_LOOP ( 'NONE', ( #57504, #15626, #8654, #40608 ) ) ; +#38340 = CIRCLE ( 'NONE', #19318, 9.500000000000101300 ) ; +#38341 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344307300, 31.17701665379242100, -28.20555803802996000 ) ) ; +#38342 = CIRCLE ( 'NONE', #60164, 10.50000000000009600 ) ; +#38343 = AXIS2_PLACEMENT_3D ( 'NONE', #28990, #35214, #10175 ) ; +#38344 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390812100, 51.46283204837324400, -28.48697406221691300 ) ) ; +#38345 = VERTEX_POINT ( 'NONE', #4173 ) ; +#38346 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 67.94142842854287800, -28.20555803803047800 ) ) ; +#38347 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471848200, 41.46868088498121800, -28.51286550264512700 ) ) ; +#38348 = EDGE_LOOP ( 'NONE', ( #2752, #6843, #49324, #53774 ) ) ; +#38349 = CARTESIAN_POINT ( 'NONE', ( -4.289075880095317900, 7.615022776544382300, -28.44796972294024300 ) ) ; +#38351 = ORIENTED_EDGE ( 'NONE', *, *, #21542, .F. ) ; +#38350 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 60.79999999999999000, -28.20555803802997700 ) ) ; +#38352 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192774100, 84.80000000000008200, -28.70555803802997700 ) ) ; +#38354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28552, #22244, #59518, #34772 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276997789000E-007, 0.0007677744771234474500 ), + .UNSPECIFIED. ) ; +#38353 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38355 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528429300, 18.13131911501857700, -28.51286550264478600 ) ) ; +#38356 = CONICAL_SURFACE ( 'NONE', #72217, 10.00000000000009400, 0.7853981633974447300 ) ; +#38357 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519700, 75.79999999999982700, -28.63843632546337800 ) ) ; +#38358 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#38359 = ORIENTED_EDGE ( 'NONE', *, *, #53098, .T. ) ; +#38360 = AXIS2_PLACEMENT_3D ( 'NONE', #31799, #75560, #63076 ) ; +#38361 = CIRCLE ( 'NONE', #19021, 9.500000000000099500 ) ; +#38362 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 65.33333333333334300, 5.722645192245503900 ) ) ; +#38363 = EDGE_LOOP ( 'NONE', ( #1920, #7705, #37907, #49247 ) ) ; +#38364 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38366 = ORIENTED_EDGE ( 'NONE', *, *, #76567, .F. ) ; +#38367 = VERTEX_POINT ( 'NONE', #4432 ) ; +#38368 = CARTESIAN_POINT ( 'NONE', ( 11.30404578338976400, 60.13716795162665100, -28.48697406221639000 ) ) ; +#38369 = ORIENTED_EDGE ( 'NONE', *, *, #55578, .F. ) ; +#38370 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#38371 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 28.66749699759768400, -28.20555803802994200 ) ) ; +#38372 = ORIENTED_EDGE ( 'NONE', *, *, #47625, .T. ) ; +#38373 = CONICAL_SURFACE ( 'NONE', #39192, 10.00000000000009200, 0.7853981633974447300 ) ; +#38374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38375 = ORIENTED_EDGE ( 'NONE', *, *, #58214, .T. ) ; +#38376 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 43.20037755566824700, -28.53664883431610400 ) ) ; +#38377 = ORIENTED_EDGE ( 'NONE', *, *, #11436, .F. ) ; +#38378 = ORIENTED_EDGE ( 'NONE', *, *, #49943, .T. ) ; +#38379 = EDGE_CURVE ( 'NONE', #63100, #48521, #11833, .T. ) ; +#38380 = ORIENTED_EDGE ( 'NONE', *, *, #36084, .T. ) ; +#38381 = ADVANCED_FACE ( 'NONE', ( #53676 ), #49735, .T. ) ; +#38382 = CIRCLE ( 'NONE', #3292, 10.50000000000009600 ) ; +#38383 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38384 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 43.65857157145701700, -28.20555803802997700 ) ) ; +#38385 = ADVANCED_FACE ( 'NONE', ( #18636 ), #16697, .T. ) ; +#38386 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 30.49999999999999300, -7.061964498581016200 ) ) ; +#38387 = CARTESIAN_POINT ( 'NONE', ( -17.32922790642990700, 61.13127791441743100, -28.43092544535692300 ) ) ; +#38388 = CARTESIAN_POINT ( 'NONE', ( 8.466819876342333000, 75.79999999999998300, -28.37307693585060900 ) ) ; +#38389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71553, #34292, #9521, #53029 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576353100 ), + .UNSPECIFIED. ) ; +#38390 = ADVANCED_FACE ( 'NONE', ( #66336 ), #64405, .F. ) ; +#38391 = EDGE_CURVE ( 'NONE', #66678, #14568, #78144, .T. ) ; +#38392 = FACE_OUTER_BOUND ( 'NONE', #64703, .T. ) ; +#38393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38394 = EDGE_CURVE ( 'NONE', #38804, #56207, #63703, .T. ) ; +#38395 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38396 = ORIENTED_EDGE ( 'NONE', *, *, #51505, .T. ) ; +#38397 = ORIENTED_EDGE ( 'NONE', *, *, #68599, .F. ) ; +#38398 = CIRCLE ( 'NONE', #77593, 9.500000000000099500 ) ; +#38399 = AXIS2_PLACEMENT_3D ( 'NONE', #29973, #73458, #36183 ) ; +#38400 = EDGE_CURVE ( 'NONE', #76058, #43443, #120, .T. ) ; +#38401 = ORIENTED_EDGE ( 'NONE', *, *, #66038, .T. ) ; +#38402 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846543500, 40.60079448659599400, -28.70555803802996700 ) ) ; +#38403 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985147800, 36.00238095238092500, -28.70555803802995200 ) ) ; +#38404 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 1.833333333333333000, 1.741883078712340300 ) ) ; +#38405 = EDGE_CURVE ( 'NONE', #69375, #79978, #35217, .T. ) ; +#38406 = FACE_OUTER_BOUND ( 'NONE', #61053, .T. ) ; +#38407 = AXIS2_PLACEMENT_3D ( 'NONE', #38442, #1201, #44677 ) ; +#38408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38409 = FACE_OUTER_BOUND ( 'NONE', #56199, .T. ) ; +#38410 = VERTEX_POINT ( 'NONE', #17503 ) ; +#38411 = FACE_OUTER_BOUND ( 'NONE', #4919, .T. ) ; +#38412 = ORIENTED_EDGE ( 'NONE', *, *, #70474, .T. ) ; +#38413 = CARTESIAN_POINT ( 'NONE', ( 19.59143623927800000, 0.8169588536579532900, -22.66951944587199100 ) ) ; +#38414 = EDGE_LOOP ( 'NONE', ( #30402, #50724, #55305, #63597 ) ) ; +#38415 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38416 = AXIS2_PLACEMENT_3D ( 'NONE', #7809, #51302, #14093 ) ; +#38417 = PLANE ( 'NONE', #63922 ) ; +#38418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #670, #50409, #69227, #31969 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721021198900E-007, 0.001076779618376944000 ), + .UNSPECIFIED. ) ; +#38419 = EDGE_CURVE ( 'NONE', #80699, #13532, #49182, .T. ) ; +#38420 = EDGE_CURVE ( 'NONE', #68660, #51542, #20595, .T. ) ; +#38423 = FACE_OUTER_BOUND ( 'NONE', #60036, .T. ) ; +#38422 = AXIS2_PLACEMENT_3D ( 'NONE', #382, #43870, #6642 ) ; +#38421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38424 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034451500, 10.17701665379219700, -28.20555803802993500 ) ) ; +#38425 = ORIENTED_EDGE ( 'NONE', *, *, #36067, .F. ) ; +#38426 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 51.43383669612129000, -28.27375072930956200 ) ) ; +#38428 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 36.33333333333332900, 1.294441961969997200 ) ) ; +#38427 = FACE_OUTER_BOUND ( 'NONE', #62990, .T. ) ; +#38429 = ORIENTED_EDGE ( 'NONE', *, *, #69867, .T. ) ; +#38430 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#38431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38432 = ORIENTED_EDGE ( 'NONE', *, *, #12597, .F. ) ; +#38433 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#38434 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59525, #21985, #65788, #28558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710631560500E-007, 0.0008482615949373553500 ), + .UNSPECIFIED. ) ; +#38435 = VERTEX_POINT ( 'NONE', #36250 ) ; +#38436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38437 = ORIENTED_EDGE ( 'NONE', *, *, #34589, .T. ) ; +#38438 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 67.94142842854297700, -28.37229765499282100 ) ) ; +#38439 = EDGE_CURVE ( 'NONE', #51415, #79782, #55614, .T. ) ; +#38440 = CARTESIAN_POINT ( 'NONE', ( 19.21761716322135900, 93.70880858161157800, -27.84387079877670600 ) ) ; +#38441 = CIRCLE ( 'NONE', #43241, 9.500000000000097700 ) ; +#38442 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#38443 = AXIS2_PLACEMENT_3D ( 'NONE', #24290, #67804, #30562 ) ; +#38445 = VERTEX_POINT ( 'NONE', #79513 ) ; +#38444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38446 = AXIS2_PLACEMENT_3D ( 'NONE', #15412, #58916, #21681 ) ; +#38447 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#38448 = ORIENTED_EDGE ( 'NONE', *, *, #69406, .F. ) ; +#38449 = CARTESIAN_POINT ( 'NONE', ( 4.186539978270463500, 6.877501000801542500, -28.20555803803025800 ) ) ; +#38450 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819088100, 71.65075715145258100, -28.20555803803014100 ) ) ; +#38451 = ORIENTED_EDGE ( 'NONE', *, *, #7440, .T. ) ; +#38452 = ORIENTED_EDGE ( 'NONE', *, *, #48632, .T. ) ; +#38453 = CYLINDRICAL_SURFACE ( 'NONE', #15951, 10.00000000000000200 ) ; +#38454 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38456 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567160700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#38457 = VERTEX_POINT ( 'NONE', #11784 ) ; +#38458 = FACE_OUTER_BOUND ( 'NONE', #8003, .T. ) ; +#38459 = CARTESIAN_POINT ( 'NONE', ( 9.277608394787083800, 50.54999999999995500, -28.70555803803009800 ) ) ; +#38460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38461 = CARTESIAN_POINT ( 'NONE', ( 10.37150777124400700, 81.43250300240215700, -28.25053031809475400 ) ) ; +#38462 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38463 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#38464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#38465 = AXIS2_PLACEMENT_3D ( 'NONE', #33276, #76784, #39519 ) ; +#38466 = CONICAL_SURFACE ( 'NONE', #8911, 10.50000000000009400, 0.7853981633974500600 ) ; +#38467 = ORIENTED_EDGE ( 'NONE', *, *, #52279, .T. ) ; +#38468 = ADVANCED_FACE ( 'NONE', ( #47792 ), #45832, .T. ) ; +#38469 = CIRCLE ( 'NONE', #55662, 10.00000000000009200 ) ; +#38470 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 7.833333333333339300, 3.794441961969996900 ) ) ; +#38471 = AXIS2_PLACEMENT_3D ( 'NONE', #72022, #9713, #22223 ) ; +#38472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38473 = ORIENTED_EDGE ( 'NONE', *, *, #2436, .F. ) ; +#38474 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819378900, 81.65075715145303500, -28.20555803802997700 ) ) ; +#38475 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62712, #25454, #50405, #13220, #56700, #19453 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 9.851335625380350200E-017, 0.001587068747398150200, 0.003174137494796201900 ), + .UNSPECIFIED. ) ; +#38476 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38477 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.15857157145701000, -28.20555803802994200 ) ) ; +#38478 = EDGE_CURVE ( 'NONE', #43426, #61206, #34779, .T. ) ; +#38479 = CONICAL_SURFACE ( 'NONE', #32259, 10.50000000000009600, 0.7853981633974518300 ) ; +#38480 = CIRCLE ( 'NONE', #11104, 10.00000000000009200 ) ; +#38481 = AXIS2_PLACEMENT_3D ( 'NONE', #22962, #78475, #47677 ) ; +#38482 = ORIENTED_EDGE ( 'NONE', *, *, #42239, .F. ) ; +#38483 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#38484 = CIRCLE ( 'NONE', #10406, 10.00000000000009400 ) ; +#38485 = ORIENTED_EDGE ( 'NONE', *, *, #73812, .T. ) ; +#38486 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189933600, 38.62363993080087000, -28.38670679782167700 ) ) ; +#38487 = ORIENTED_EDGE ( 'NONE', *, *, #5937, .F. ) ; +#38488 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38489 = ADVANCED_FACE ( 'NONE', ( #62424 ), #12804, .F. ) ; +#38490 = CONICAL_SURFACE ( 'NONE', #76943, 10.00000000000009200, 0.7853981633974447300 ) ; +#38491 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38492 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#38493 = CONICAL_SURFACE ( 'NONE', #77297, 10.00000000000009200, 0.7853981633974447300 ) ; +#38494 = VERTEX_POINT ( 'NONE', #61830 ) ; +#38495 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715066300, 39.27966528189954700, -28.30868034705248300 ) ) ; +#38496 = EDGE_CURVE ( 'NONE', #39773, #33779, #20298, .T. ) ; +#38497 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 60.69966441803890000, -28.70555803802997700 ) ) ; +#38498 = ORIENTED_EDGE ( 'NONE', *, *, #31819, .T. ) ; +#38499 = VERTEX_POINT ( 'NONE', #6053 ) ; +#38500 = EDGE_CURVE ( 'NONE', #60353, #30197, #5837, .T. ) ; +#38501 = CARTESIAN_POINT ( 'NONE', ( -18.52007980567570300, 2.959842952566062100, -25.83100533889427200 ) ) ; +#38502 = ORIENTED_EDGE ( 'NONE', *, *, #22121, .F. ) ; +#38503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38504 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714229600, 15.92318720225459400, -28.70555803803025800 ) ) ; +#38505 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 39.13131911501876200, -28.51286550264508800 ) ) ; +#38506 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040394200, 12.15857157145700800, -28.37229765499276400 ) ) ; +#38507 = CIRCLE ( 'NONE', #27177, 9.500000000000097700 ) ; +#38508 = CIRCLE ( 'NONE', #6201, 10.00000000000009200 ) ; +#38509 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#38510 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14234, #38951, #20494, #64032 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169801700E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#38511 = EDGE_LOOP ( 'NONE', ( #44172, #37135, #9860, #62126, #338 ) ) ; +#38512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#38513 = VERTEX_POINT ( 'NONE', #62092 ) ; +#38514 = EDGE_CURVE ( 'NONE', #80726, #59983, #72177, .T. ) ; +#38515 = CARTESIAN_POINT ( 'NONE', ( -10.34402138938949500, 8.107395204316654600, -28.54957942741933900 ) ) ; +#38516 = EDGE_CURVE ( 'NONE', #65128, #18844, #57687, .T. ) ; +#38517 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#38518 = FACE_OUTER_BOUND ( 'NONE', #60461, .T. ) ; +#38519 = AXIS2_PLACEMENT_3D ( 'NONE', #41298, #4037, #47522 ) ; +#38520 = ORIENTED_EDGE ( 'NONE', *, *, #16254, .T. ) ; +#38521 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655689600, 41.67701665379241400, -28.20555803802997400 ) ) ; +#38522 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 13.66666666666667700, 2.794441961969992100 ) ) ; +#38523 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148517700, 46.50238095238093200, -28.70555803802996700 ) ) ; +#38524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38525 = ORIENTED_EDGE ( 'NONE', *, *, #25732, .F. ) ; +#38526 = FACE_OUTER_BOUND ( 'NONE', #72490, .T. ) ; +#38527 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42632, #30437, #49143, #11925 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736373637000E-007, 0.0009376786059871995000 ), + .UNSPECIFIED. ) ; +#38528 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#38529 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466624000, 19.76893971291457000, -28.57333386111661300 ) ) ; +#38530 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38531 = AXIS2_PLACEMENT_3D ( 'NONE', #48604, #17901, #11666 ) ; +#38532 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38533 = EDGE_CURVE ( 'NONE', #8161, #58529, #43210, .T. ) ; +#38535 = ORIENTED_EDGE ( 'NONE', *, *, #73237, .T. ) ; +#38534 = EDGE_CURVE ( 'NONE', #66426, #20847, #28820, .T. ) ; +#38536 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000014200, 11.47376207875059400, -28.70555803802994200 ) ) ; +#38537 = EDGE_CURVE ( 'NONE', #56108, #26473, #29380, .T. ) ; +#38538 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38539 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049507300, 49.19228657120675800, -28.53891855579986700 ) ) ; +#38540 = AXIS2_PLACEMENT_3D ( 'NONE', #69650, #32404, #75907 ) ; +#38541 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 10.12753447840889900, -28.38801640354855500 ) ) ; +#38542 = CONICAL_SURFACE ( 'NONE', #5261, 10.50000000000009600, 0.7853981633974500600 ) ; +#38543 = ORIENTED_EDGE ( 'NONE', *, *, #24398, .F. ) ; +#38544 = CONICAL_SURFACE ( 'NONE', #7116, 10.50000000000009600, 0.7853981633974518300 ) ; +#38545 = AXIS2_PLACEMENT_3D ( 'NONE', #77802, #46482, #2994 ) ; +#38546 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#38547 = VERTEX_POINT ( 'NONE', #37553 ) ; +#38548 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#38549 = EDGE_CURVE ( 'NONE', #6854, #73343, #33229, .T. ) ; +#38550 = ORIENTED_EDGE ( 'NONE', *, *, #2191, .T. ) ; +#38551 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#38552 = CONICAL_SURFACE ( 'NONE', #24353, 10.00000000000009600, 0.7853981633974482800 ) ; +#38553 = AXIS2_PLACEMENT_3D ( 'NONE', #47069, #9852, #53357 ) ; +#38554 = AXIS2_PLACEMENT_3D ( 'NONE', #42469, #5233, #48716 ) ; +#38555 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#38557 = ORIENTED_EDGE ( 'NONE', *, *, #63713, .T. ) ; +#38556 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042492800, 42.59027028261002800, -28.70555803802999500 ) ) ; +#38558 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571429700, 39.07141756547892400, -28.70555803802995200 ) ) ; +#38559 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58667, #15158, #27687, #71186 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001008322012793431300, 0.0003934298461347595200 ), + .UNSPECIFIED. ) ; +#38560 = ADVANCED_FACE ( 'NONE', ( #14730 ), #27400, .F. ) ; +#38561 = CIRCLE ( 'NONE', #36892, 10.00000000000009400 ) ; +#38562 = CONICAL_SURFACE ( 'NONE', #38106, 10.50000000000009600, 0.7853981633974482800 ) ; +#38563 = ORIENTED_EDGE ( 'NONE', *, *, #27369, .T. ) ; +#38564 = CARTESIAN_POINT ( 'NONE', ( 4.720904428263970900, 71.50050415885223700, -28.63287458792251500 ) ) ; +#38565 = PLANE ( 'NONE', #61 ) ; +#38566 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38567 = ORIENTED_EDGE ( 'NONE', *, *, #63708, .T. ) ; +#38568 = ORIENTED_EDGE ( 'NONE', *, *, #57094, .F. ) ; +#38569 = ADVANCED_FACE ( 'NONE', ( #31291 ), #75074, .T. ) ; +#38570 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 57.33333333333335700, -3.705558038030004400 ) ) ; +#38571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38572 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#38573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1255, #75788, #31753, #44736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721891215600E-007, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#38574 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#38575 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 22.33333333333334300, -5.205558038030008400 ) ) ; +#38576 = CIRCLE ( 'NONE', #69433, 10.50000000000009600 ) ; +#38577 = AXIS2_PLACEMENT_3D ( 'NONE', #62147, #24879, #68390 ) ; +#38578 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#38579 = ORIENTED_EDGE ( 'NONE', *, *, #43856, .T. ) ; +#38580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38581 = ORIENTED_EDGE ( 'NONE', *, *, #62068, .F. ) ; +#38582 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#38583 = ADVANCED_FACE ( 'NONE', ( #9898 ), #41963, .F. ) ; +#38584 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ; +#38585 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 59.66666666666667100, 8.320721403598824400 ) ) ; +#38586 = EDGE_LOOP ( 'NONE', ( #5367, #57842, #58200, #18516 ) ) ; +#38587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38589 = CONICAL_SURFACE ( 'NONE', #72462, 10.00000000000009400, 0.7853981633974447300 ) ; +#38590 = AXIS2_PLACEMENT_3D ( 'NONE', #71337, #34076, #77592 ) ; +#38591 = ORIENTED_EDGE ( 'NONE', *, *, #12292, .F. ) ; +#38592 = ORIENTED_EDGE ( 'NONE', *, *, #17423, .T. ) ; +#38593 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086481800, 41.12812581275677800, -28.37194250757537300 ) ) ; +#38594 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#38595 = ADVANCED_FACE ( 'NONE', ( #43880 ), #8838, .T. ) ; +#38596 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385181600, 20.60677350908857600, -28.30799595738880500 ) ) ; +#38597 = EDGE_CURVE ( 'NONE', #48563, #79585, #25442, .T. ) ; +#38598 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38600 = CONICAL_SURFACE ( 'NONE', #60173, 10.00000000000009400, 0.7853981633974447300 ) ; +#38601 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000038600, 61.07757630314360900, -28.53861367218446400 ) ) ; +#38602 = EDGE_LOOP ( 'NONE', ( #37319, #46583, #65803, #31561, #46706 ) ) ; +#38603 = AXIS2_PLACEMENT_3D ( 'NONE', #28805, #72298, #35037 ) ; +#38604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38605 = ORIENTED_EDGE ( 'NONE', *, *, #32847, .T. ) ; +#38606 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 80.69966441803890700, -28.70555803802997700 ) ) ; +#38607 = CONICAL_SURFACE ( 'NONE', #8891, 10.50000000000009600, 0.7853981633974518300 ) ; +#38608 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614805100, 31.10677350908857600, -28.30799595738881900 ) ) ; +#38609 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38558, #32343, #57362, #20117 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820729589800E-007, 0.0005869288236378067400 ), + .UNSPECIFIED. ) ; +#38610 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410165800, 90.46048989987065200, -28.36889022317254200 ) ) ; +#38611 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38612 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736729100, 24.54999999999995500, -28.70555803802994200 ) ) ; +#38613 = PLANE ( 'NONE', #33036 ) ; +#38614 = CONICAL_SURFACE ( 'NONE', #39698, 10.50000000000009600, 0.7853981633974482800 ) ; +#38615 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368900, 60.79999999999998300, -28.55171188418376000 ) ) ; +#38616 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#38617 = CARTESIAN_POINT ( 'NONE', ( 10.97684032349359000, 20.51912043132477600, -28.30223257055572700 ) ) ; +#38618 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449975400, 69.83662311806182300, -28.37223523914888900 ) ) ; +#38619 = EDGE_LOOP ( 'NONE', ( #62991, #39797, #20060, #43232, #69768, #48025, #38563, #16952 ) ) ; +#38620 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 80.13716795162648100, -28.48697406221665300 ) ) ; +#38621 = CARTESIAN_POINT ( 'NONE', ( 17.26457816485422800, 49.31692616327583100, -28.44650835714144300 ) ) ; +#38622 = EDGE_CURVE ( 'NONE', #71510, #37108, #14312, .T. ) ; +#38623 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 63.16666666666667900, -9.205558038030003900 ) ) ; +#38624 = FACE_OUTER_BOUND ( 'NONE', #15734, .T. ) ; +#38625 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868711200, 9.584862158801836800, -28.32821106611847400 ) ) ; +#38626 = EDGE_LOOP ( 'NONE', ( #39120, #17280, #36430, #52467, #33940, #72847 ) ) ; +#38627 = CARTESIAN_POINT ( 'NONE', ( 5.405592002871559400E-015, 47.20389005397395000, -28.37519436813182600 ) ) ; +#38628 = EDGE_CURVE ( 'NONE', #6076, #3197, #77011, .T. ) ; +#38629 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230975600, 30.31139552890386200, -28.53900456328626600 ) ) ; +#38630 = CARTESIAN_POINT ( 'NONE', ( -3.371507771243923600, 61.43250300240229200, -28.25053031809460100 ) ) ; +#38631 = EDGE_LOOP ( 'NONE', ( #80156, #40777, #38730, #42805 ) ) ; +#38632 = FACE_OUTER_BOUND ( 'NONE', #75922, .T. ) ; +#38633 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344754100, 10.17701665379211600, -28.20555803803009800 ) ) ; +#38634 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 71.25732391202396300, -28.20555803802997700 ) ) ; +#38635 = CARTESIAN_POINT ( 'NONE', ( 1.851846210996577600, 65.79999999999998300, -28.37148172714593400 ) ) ; +#38636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38637 = EDGE_CURVE ( 'NONE', #68569, #37280, #58519, .T. ) ; +#38638 = CARTESIAN_POINT ( 'NONE', ( -16.45764012468388400, 85.17573043145935700, -28.60339038649757300 ) ) ; +#38639 = ORIENTED_EDGE ( 'NONE', *, *, #32964, .T. ) ; +#38640 = EDGE_CURVE ( 'NONE', #19770, #64978, #80623, .T. ) ; +#38641 = AXIS2_PLACEMENT_3D ( 'NONE', #47164, #77673, #16208 ) ; +#38642 = FACE_OUTER_BOUND ( 'NONE', #48646, .T. ) ; +#38643 = ORIENTED_EDGE ( 'NONE', *, *, #43782, .F. ) ; +#38644 = EDGE_CURVE ( 'NONE', #28056, #53681, #10839, .T. ) ; +#38645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38646 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 69.77559325427188200, -28.45987523529578700 ) ) ; +#38647 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 28.33333333333334300, 5.722645192245503900 ) ) ; +#38648 = ORIENTED_EDGE ( 'NONE', *, *, #34037, .T. ) ; +#38649 = AXIS2_PLACEMENT_3D ( 'NONE', #68240, #30999, #74509 ) ; +#38650 = EDGE_CURVE ( 'NONE', #14575, #46838, #66180, .T. ) ; +#38651 = CARTESIAN_POINT ( 'NONE', ( 17.90233405034981500, 61.36492161058527700, -28.27580420063998900 ) ) ; +#38652 = EDGE_CURVE ( 'NONE', #40126, #78304, #78999, .T. ) ; +#38653 = EDGE_CURVE ( 'NONE', #76858, #66775, #51659, .T. ) ; +#38654 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#38655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65792, #34789, #22530, #66064 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225029928000E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#38656 = ADVANCED_FACE ( 'NONE', ( #40019 ), #54612, .T. ) ; +#38657 = CIRCLE ( 'NONE', #7231, 10.00000000000009400 ) ; +#38658 = CIRCLE ( 'NONE', #61612, 10.50000000000009600 ) ; +#38659 = ORIENTED_EDGE ( 'NONE', *, *, #32277, .F. ) ; +#38660 = EDGE_LOOP ( 'NONE', ( #60433, #16621, #55490, #23189 ) ) ; +#38661 = AXIS2_PLACEMENT_3D ( 'NONE', #2820, #46313, #9061 ) ; +#38662 = ORIENTED_EDGE ( 'NONE', *, *, #64204, .T. ) ; +#38663 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999996400, 11.47376207875059300, -28.70555803802994200 ) ) ; +#38664 = ORIENTED_EDGE ( 'NONE', *, *, #74410, .F. ) ; +#38665 = ORIENTED_EDGE ( 'NONE', *, *, #70973, .F. ) ; +#38666 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999803700, 72.97376207875046800, -28.70555803803030800 ) ) ; +#38667 = ADVANCED_FACE ( 'NONE', ( #56556 ), #39168, .T. ) ; +#38668 = AXIS2_PLACEMENT_3D ( 'NONE', #24695, #80718, #30960 ) ; +#38669 = AXIS2_PLACEMENT_3D ( 'NONE', #44076, #6855, #50338 ) ; +#38670 = ORIENTED_EDGE ( 'NONE', *, *, #35589, .T. ) ; +#38671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38673 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, -0.3333333333333209400, -6.705558038030000400 ) ) ; +#38674 = FACE_OUTER_BOUND ( 'NONE', #23814, .T. ) ; +#38676 = ORIENTED_EDGE ( 'NONE', *, *, #76555, .T. ) ; +#38675 = CARTESIAN_POINT ( 'NONE', ( 2.279102202939420300, 61.50050326225952800, -28.63287226700119700 ) ) ; +#38677 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169300, 61.25732391202397100, -28.20555803802997700 ) ) ; +#38678 = ORIENTED_EDGE ( 'NONE', *, *, #67997, .F. ) ; +#38679 = ADVANCED_FACE ( 'NONE', ( #73129 ), #4975, .F. ) ; +#38680 = ORIENTED_EDGE ( 'NONE', *, *, #72556, .T. ) ; +#38681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38683 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#38682 = CIRCLE ( 'NONE', #11013, 10.00000000000009200 ) ; +#38684 = AXIS2_PLACEMENT_3D ( 'NONE', #6510, #49991, #12793 ) ; +#38685 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906779400, 59.92963663972543000, -28.27338767626452000 ) ) ; +#38686 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269787300, 70.01262610361141000, -28.29936525552453800 ) ) ; +#38687 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#38688 = VERTEX_POINT ( 'NONE', #20898 ) ; +#38689 = ADVANCED_FACE ( 'NONE', ( #71157 ), #52639, .F. ) ; +#38690 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#38691 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#38692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38693 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 34.16666666666668600, -2.545304000185620600 ) ) ; +#38694 = CONICAL_SURFACE ( 'NONE', #18730, 10.50000000000009600, 0.7853981633974500600 ) ; +#38695 = VERTEX_POINT ( 'NONE', #33392 ) ; +#38696 = EDGE_CURVE ( 'NONE', #19712, #56502, #69206, .T. ) ; +#38697 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956700, 51.61077422949630700, -28.37255355648657900 ) ) ; +#38698 = AXIS2_PLACEMENT_3D ( 'NONE', #63383, #69601, #13618 ) ; +#38699 = ORIENTED_EDGE ( 'NONE', *, *, #8078, .T. ) ; +#38700 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66418, #10114, #10657, #54141 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454575920800E-007, 0.0004559726636569753100 ), + .UNSPECIFIED. ) ; +#38701 = EDGE_LOOP ( 'NONE', ( #44594, #46795, #5427, #16547 ) ) ; +#38702 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195753700, 42.59027028261004900, -28.70555803802997400 ) ) ; +#38703 = ADVANCED_FACE ( 'NONE', ( #23489 ), #3007, .F. ) ; +#38704 = CONICAL_SURFACE ( 'NONE', #21151, 10.50000000000009800, 0.7853981633974518300 ) ; +#38705 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#38706 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38707 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 70.16749699759751000, -28.20555803803014400 ) ) ; +#38708 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 64.37738371066728900, -28.70555803802997700 ) ) ; +#38709 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260019500, 90.20034312068833100, -28.70555803803001600 ) ) ; +#38710 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.16749699759738200, -28.20555803803047800 ) ) ; +#38711 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38712 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#38713 = CARTESIAN_POINT ( 'NONE', ( -10.22125914545564400, 28.66476764525110700, -28.30311733712046200 ) ) ; +#38714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38715 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000075500, 83.20037755566792700, -28.53664883431636700 ) ) ; +#38716 = AXIS2_PLACEMENT_3D ( 'NONE', #35982, #17489, #61013 ) ; +#38717 = FACE_OUTER_BOUND ( 'NONE', #50756, .T. ) ; +#38718 = ORIENTED_EDGE ( 'NONE', *, *, #52084, .F. ) ; +#38719 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 36.94142842854297000, -28.20555803802995200 ) ) ; +#38720 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#38721 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105215300, 61.31766786975352100, -28.25051428653849000 ) ) ; +#38722 = ORIENTED_EDGE ( 'NONE', *, *, #25087, .T. ) ; +#38723 = CARTESIAN_POINT ( 'NONE', ( 7.238199452803985200, 83.65857157145661900, -28.37229765499304100 ) ) ; +#38724 = EDGE_LOOP ( 'NONE', ( #60421, #22138, #9994, #43662 ) ) ; +#38725 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473788300, 38.73827450271181800, -28.47230003642365000 ) ) ; +#38726 = CARTESIAN_POINT ( 'NONE', ( 8.116254736416767200, 14.04999999999997900, -28.53994725305373200 ) ) ; +#38727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38728 = FACE_OUTER_BOUND ( 'NONE', #32320, .T. ) ; +#38729 = CIRCLE ( 'NONE', #80302, 10.50000000000009600 ) ; +#38730 = ORIENTED_EDGE ( 'NONE', *, *, #38644, .T. ) ; +#38731 = ORIENTED_EDGE ( 'NONE', *, *, #76811, .T. ) ; +#38732 = EDGE_CURVE ( 'NONE', #61214, #36984, #37217, .T. ) ; +#38733 = ORIENTED_EDGE ( 'NONE', *, *, #66919, .T. ) ; +#38734 = EDGE_CURVE ( 'NONE', #44180, #9754, #6917, .T. ) ; +#38735 = EDGE_LOOP ( 'NONE', ( #40747, #14226, #44885 ) ) ; +#38736 = ORIENTED_EDGE ( 'NONE', *, *, #63235, .F. ) ; +#38737 = EDGE_LOOP ( 'NONE', ( #24432, #11809, #49383, #11011 ) ) ; +#38738 = VERTEX_POINT ( 'NONE', #2626 ) ; +#38740 = ORIENTED_EDGE ( 'NONE', *, *, #26181, .T. ) ; +#38739 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38741 = VERTEX_POINT ( 'NONE', #27439 ) ; +#38742 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 5.666666666666683800, -5.535685056952199400 ) ) ; +#38743 = EDGE_LOOP ( 'NONE', ( #76654, #441, #47624, #14504, #3739 ) ) ; +#38744 = EDGE_CURVE ( 'NONE', #77911, #64905, #36129, .T. ) ; +#38745 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965575000, 41.67701665379186000, -28.20555803802996700 ) ) ; +#38746 = EDGE_LOOP ( 'NONE', ( #32063, #37238, #49493, #75501 ) ) ; +#38747 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 70.51916201875610600, -28.45106778992441600 ) ) ; +#38748 = CIRCLE ( 'NONE', #64209, 9.500000000000097700 ) ; +#38749 = ORIENTED_EDGE ( 'NONE', *, *, #45517, .F. ) ; +#38750 = EDGE_CURVE ( 'NONE', #70061, #46397, #21544, .T. ) ; +#38752 = EDGE_CURVE ( 'NONE', #60061, #50861, #22791, .T. ) ; +#38751 = ORIENTED_EDGE ( 'NONE', *, *, #13222, .T. ) ; +#38753 = CARTESIAN_POINT ( 'NONE', ( 5.727308459283269000, 75.79999999999967000, -28.53979898350192800 ) ) ; +#38754 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63138, #19614, #69369, #32117 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782222300, 0.0004366687057304556000 ), + .UNSPECIFIED. ) ; +#38755 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455915300, 70.07527064970103900, -28.39317435246135100 ) ) ; +#38756 = ORIENTED_EDGE ( 'NONE', *, *, #24362, .F. ) ; +#38757 = EDGE_LOOP ( 'NONE', ( #7701, #29024, #12356 ) ) ; +#38758 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 44.44999999999999600, -1.205558038030005300 ) ) ; +#38759 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16802, #54033, #29354, #72833 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159532100E-007, 0.0008724363063898906500 ), + .UNSPECIFIED. ) ; +#38760 = FACE_OUTER_BOUND ( 'NONE', #69972, .T. ) ; +#38761 = AXIS2_PLACEMENT_3D ( 'NONE', #3226, #40506, #71525 ) ; +#38762 = EDGE_LOOP ( 'NONE', ( #37964, #73114, #53050 ) ) ; +#38763 = EDGE_CURVE ( 'NONE', #77533, #60793, #60496, .T. ) ; +#38764 = EDGE_CURVE ( 'NONE', #26090, #16869, #19575, .T. ) ; +#38765 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#38766 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807174400, 54.79999999999985500, -28.70555803803014400 ) ) ; +#38767 = EDGE_CURVE ( 'NONE', #48799, #40799, #8287, .T. ) ; +#38768 = ORIENTED_EDGE ( 'NONE', *, *, #3538, .T. ) ; +#38769 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655456400, 10.17701665379220800, -28.20555803802993500 ) ) ; +#38770 = PLANE ( 'NONE', #68261 ) ; +#38771 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#38772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5960, #37192, #55971, #18725 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698062847700E-007, 0.0008724363063899798800 ), + .UNSPECIFIED. ) ; +#38773 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#38774 = AXIS2_PLACEMENT_3D ( 'NONE', #61596, #24323, #67837 ) ; +#38775 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825477500, 70.16054007504466500, -28.34042301926890100 ) ) ; +#38776 = CARTESIAN_POINT ( 'NONE', ( 11.74534273518457500, 41.50380841767820800, -28.64142799534457500 ) ) ; +#38777 = VECTOR ( 'NONE', #73873, 1000.000000000000000 ) ; +#38778 = VERTEX_POINT ( 'NONE', #15711 ) ; +#38779 = ADVANCED_FACE ( 'NONE', ( #34168 ), #1055, .T. ) ; +#38780 = CARTESIAN_POINT ( 'NONE', ( -17.21123107090154700, 5.577537848894447600, -27.67449565340701400 ) ) ; +#38781 = ORIENTED_EDGE ( 'NONE', *, *, #72542, .F. ) ; +#38782 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615369000, 80.79999999999998300, -28.55171188418376400 ) ) ; +#38783 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999954900, 81.43250300240198700, -28.20555803803047800 ) ) ; +#38784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38785 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#38786 = ORIENTED_EDGE ( 'NONE', *, *, #33199, .F. ) ; +#38787 = ADVANCED_FACE ( 'NONE', ( #50677 ), #15670, .F. ) ; +#38788 = AXIS2_PLACEMENT_3D ( 'NONE', #77049, #2495, #70787 ) ; +#38789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38790 = AXIS2_PLACEMENT_3D ( 'NONE', #12795, #12521, #74796 ) ; +#38791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42998, #61796, #80548, #43257 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978776974900, 0.0006311001363622032100 ), + .UNSPECIFIED. ) ; +#38792 = AXIS2_PLACEMENT_3D ( 'NONE', #32419, #75930, #38636 ) ; +#38793 = ADVANCED_FACE ( 'NONE', ( #17638, #67267 ), #28533, .T. ) ; +#38794 = CARTESIAN_POINT ( 'NONE', ( -9.813460021729275300, 6.877501000800537900, -28.20555803802992800 ) ) ; +#38795 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38796 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528429300, 18.13131911501857700, -28.51286550264478600 ) ) ; +#38797 = CIRCLE ( 'NONE', #50936, 10.00000000000009400 ) ; +#38798 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 11.50000000000002300, -7.061964498581016200 ) ) ; +#38799 = CARTESIAN_POINT ( 'NONE', ( 15.12207074529080900, 9.755858509418383000, -28.70257734043093800 ) ) ; +#38800 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805682500, 36.68572799237469400, -28.67630847257083500 ) ) ; +#38801 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.62753447840813700, -28.38801640354867200 ) ) ; +#38802 = CONICAL_SURFACE ( 'NONE', #71865, 10.50000000000009200, 0.7853981633974482800 ) ; +#38803 = ORIENTED_EDGE ( 'NONE', *, *, #2772, .F. ) ; +#38804 = VERTEX_POINT ( 'NONE', #22225 ) ; +#38805 = CARTESIAN_POINT ( 'NONE', ( 15.02628644574478900, 65.88243067206822400, -28.70555803803001600 ) ) ; +#38806 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#38807 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819626700, 81.65075715145296400, -28.20555803803005900 ) ) ; +#38808 = AXIS2_PLACEMENT_3D ( 'NONE', #80127, #42859, #5610 ) ; +#38810 = ORIENTED_EDGE ( 'NONE', *, *, #43754, .T. ) ; +#38809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38811 = EDGE_CURVE ( 'NONE', #30748, #28540, #74648, .T. ) ; +#38812 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174874700, 70.16054007504448000, -28.34042301926893600 ) ) ; +#38813 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65968, #34688, #9927, #28736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#38814 = CARTESIAN_POINT ( 'NONE', ( 9.279233496942126200, 60.09951448976266900, -28.63282631410023200 ) ) ; +#38815 = CIRCLE ( 'NONE', #23802, 10.50000000000009600 ) ; +#38816 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38817 = ORIENTED_EDGE ( 'NONE', *, *, #63977, .F. ) ; +#38818 = FACE_OUTER_BOUND ( 'NONE', #41179, .T. ) ; +#38819 = ORIENTED_EDGE ( 'NONE', *, *, #32116, .T. ) ; +#38820 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38821 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576917600, 35.04999999999999700, -28.65220501466659500 ) ) ; +#38822 = ORIENTED_EDGE ( 'NONE', *, *, #47489, .T. ) ; +#38823 = ORIENTED_EDGE ( 'NONE', *, *, #14126, .F. ) ; +#38824 = EDGE_CURVE ( 'NONE', #21296, #34123, #60197, .T. ) ; +#38825 = CONICAL_SURFACE ( 'NONE', #13711, 10.00000000000009200, 0.7853981633974447300 ) ; +#38826 = ORIENTED_EDGE ( 'NONE', *, *, #14230, .F. ) ; +#38827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38828 = ORIENTED_EDGE ( 'NONE', *, *, #74069, .T. ) ; +#38829 = EDGE_LOOP ( 'NONE', ( #363, #17562, #30992 ) ) ; +#38830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38831 = ORIENTED_EDGE ( 'NONE', *, *, #58439, .F. ) ; +#38832 = ORIENTED_EDGE ( 'NONE', *, *, #70870, .T. ) ; +#38833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38834 = ORIENTED_EDGE ( 'NONE', *, *, #57025, .F. ) ; +#38835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38836 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846183500, 80.79999999999982700, -28.55171188418389100 ) ) ; +#38837 = CONICAL_SURFACE ( 'NONE', #2080, 10.50000000000009600, 0.7853981633974518300 ) ; +#38838 = AXIS2_PLACEMENT_3D ( 'NONE', #20782, #64319, #27047 ) ; +#38839 = VERTEX_POINT ( 'NONE', #22509 ) ; +#38840 = EDGE_LOOP ( 'NONE', ( #11526, #63777, #56000, #77803 ) ) ; +#38841 = ORIENTED_EDGE ( 'NONE', *, *, #3865, .T. ) ; +#38842 = ORIENTED_EDGE ( 'NONE', *, *, #73029, .T. ) ; +#38843 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042475900, 17.00972971738997000, -28.70555803802992000 ) ) ; +#38844 = FACE_OUTER_BOUND ( 'NONE', #64545, .T. ) ; +#38845 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 55.16666666666667900, 0.1341879241256129200 ) ) ; +#38846 = ORIENTED_EDGE ( 'NONE', *, *, #4624, .F. ) ; +#38847 = AXIS2_PLACEMENT_3D ( 'NONE', #54771, #17800, #5274 ) ; +#38848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38849 = CARTESIAN_POINT ( 'NONE', ( -10.04027359854958600, 39.22437813624629400, -28.30310527599300100 ) ) ; +#38850 = EDGE_LOOP ( 'NONE', ( #52514, #24108, #5929 ) ) ; +#38851 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#38852 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 20.16666666666668600, 0.9380355014189834000 ) ) ; +#38853 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957539200, 27.50972971738994100, -28.70555803802994500 ) ) ; +#38854 = EDGE_CURVE ( 'NONE', #359, #36284, #45666, .T. ) ; +#38855 = FACE_OUTER_BOUND ( 'NONE', #46587, .T. ) ; +#38856 = EDGE_LOOP ( 'NONE', ( #61929, #11650, #32858, #68771 ) ) ; +#38857 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001600, 53.43454006867175800, -28.70555803802999500 ) ) ; +#38858 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 57.50000000000000700, -9.258116921287651700 ) ) ; +#38859 = ORIENTED_EDGE ( 'NONE', *, *, #71819, .T. ) ; +#38860 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#38861 = ORIENTED_EDGE ( 'NONE', *, *, #72647, .T. ) ; +#38862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38863 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38864 = CARTESIAN_POINT ( 'NONE', ( 2.688821387764051000E-014, 44.37738371066726000, -28.70555803802999500 ) ) ; +#38865 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53707, #10195, #22710, #66245 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549120749300E-007, 0.0008759529789573985900 ), + .UNSPECIFIED. ) ; +#38866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38867 = EDGE_CURVE ( 'NONE', #59554, #79232, #48733, .T. ) ; +#38868 = CIRCLE ( 'NONE', #30635, 10.00000000000009600 ) ; +#38869 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38870 = FACE_OUTER_BOUND ( 'NONE', #36209, .T. ) ; +#38871 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#38872 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748475100, 61.37838321498787800, -28.29547179040484300 ) ) ; +#38873 = ORIENTED_EDGE ( 'NONE', *, *, #7099, .F. ) ; +#38874 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844493900, 85.79999999999998300, -28.20555803802997700 ) ) ; +#38875 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349246600, 29.20543520232828200, -28.70555803802994200 ) ) ; +#38876 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 79.91070809551060000, -28.20555803802997700 ) ) ; +#38877 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38878 = ADVANCED_FACE ( 'NONE', ( #65356 ), #13747, .F. ) ; +#38879 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301200, 76.79999999999962800, -28.70555803802997700 ) ) ; +#38880 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#38881 = AXIS2_PLACEMENT_3D ( 'NONE', #7255, #56774, #1007 ) ; +#38882 = EDGE_LOOP ( 'NONE', ( #24230, #76468, #54076, #40885 ) ) ; +#38883 = EDGE_CURVE ( 'NONE', #3316, #14733, #31270, .T. ) ; +#38884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38885 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28263, #22231, #41000, #3714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005926521990600E-007, 0.0004431156063177979500 ), + .UNSPECIFIED. ) ; +#38886 = EDGE_CURVE ( 'NONE', #15998, #77798, #16810, .T. ) ; +#38887 = CARTESIAN_POINT ( 'NONE', ( 10.75702442553471600, 70.16517473503377300, -28.29551658696729900 ) ) ; +#38888 = CIRCLE ( 'NONE', #71697, 10.50000000000009600 ) ; +#38889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38891 = ORIENTED_EDGE ( 'NONE', *, *, #24526, .T. ) ; +#38890 = EDGE_CURVE ( 'NONE', #10656, #51136, #2295, .T. ) ; +#38892 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310632700, 81.49769010897038900, -28.61774594594310300 ) ) ; +#38893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38894 = CONICAL_SURFACE ( 'NONE', #60439, 10.50000000000009600, 0.7853981633974500600 ) ; +#38895 = ORIENTED_EDGE ( 'NONE', *, *, #50803, .T. ) ; +#38896 = AXIS2_PLACEMENT_3D ( 'NONE', #68849, #25346, #56593 ) ; +#38897 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 61.00000000000001400, 6.794441961969995200 ) ) ; +#38898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38899 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#38900 = EDGE_LOOP ( 'NONE', ( #69735, #14986, #50778, #55368 ) ) ; +#38901 = FACE_OUTER_BOUND ( 'NONE', #50808, .T. ) ; +#38902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58382, #14858, #2591, #46101 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207932961300E-007, 0.0008724366121409674500 ), + .UNSPECIFIED. ) ; +#38903 = ORIENTED_EDGE ( 'NONE', *, *, #45414, .T. ) ; +#38904 = ORIENTED_EDGE ( 'NONE', *, *, #58373, .T. ) ; +#38906 = ORIENTED_EDGE ( 'NONE', *, *, #18212, .F. ) ; +#38905 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38907 = ORIENTED_EDGE ( 'NONE', *, *, #65049, .F. ) ; +#38908 = EDGE_LOOP ( 'NONE', ( #75404, #27669, #40390, #54599 ) ) ; +#38909 = ORIENTED_EDGE ( 'NONE', *, *, #80604, .T. ) ; +#38910 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 51.82440674572815500, -28.45987523529581900 ) ) ; +#38911 = AXIS2_PLACEMENT_3D ( 'NONE', #2152, #45644, #8406 ) ; +#38912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38913 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38914 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38915 = AXIS2_PLACEMENT_3D ( 'NONE', #61318, #24036, #67545 ) ; +#38916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38917 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29560, #23266, #23005, #73049 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785963473700E-007, 0.0007677775503743802700 ), + .UNSPECIFIED. ) ; +#38918 = ADVANCED_FACE ( 'NONE', ( #30306 ), #79076, .T. ) ; +#38919 = EDGE_CURVE ( 'NONE', #25994, #41038, #68650, .T. ) ; +#38920 = AXIS2_PLACEMENT_3D ( 'NONE', #76117, #32611, #7841 ) ; +#38921 = EDGE_LOOP ( 'NONE', ( #77743, #61940, #74150 ) ) ; +#38922 = FACE_OUTER_BOUND ( 'NONE', #22645, .T. ) ; +#38923 = ORIENTED_EDGE ( 'NONE', *, *, #56391, .F. ) ; +#38924 = DIRECTION ( 'NONE', ( -1.000000000000000000, 2.246879930788959000E-014, 0.0000000000000000000 ) ) ; +#38925 = VERTEX_POINT ( 'NONE', #79337 ) ; +#38926 = ORIENTED_EDGE ( 'NONE', *, *, #11564, .T. ) ; +#38927 = ORIENTED_EDGE ( 'NONE', *, *, #72045, .F. ) ; +#38928 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 21.97376207875059600, -28.70555803802995200 ) ) ; +#38929 = FACE_OUTER_BOUND ( 'NONE', #56460, .T. ) ; +#38930 = EDGE_CURVE ( 'NONE', #6870, #1060, #54176, .T. ) ; +#38931 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 26.16666666666668200, -9.205558038030003900 ) ) ; +#38932 = AXIS2_PLACEMENT_3D ( 'NONE', #58947, #65249, #15442 ) ; +#38933 = ORIENTED_EDGE ( 'NONE', *, *, #25160, .F. ) ; +#38934 = AXIS2_PLACEMENT_3D ( 'NONE', #61303, #79777, #36249 ) ; +#38935 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38936 = VERTEX_POINT ( 'NONE', #60848 ) ; +#38937 = CIRCLE ( 'NONE', #10279, 9.500000000000095900 ) ; +#38939 = ORIENTED_EDGE ( 'NONE', *, *, #62330, .T. ) ; +#38938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38940 = AXIS2_PLACEMENT_3D ( 'NONE', #63813, #14023, #32775 ) ; +#38941 = VERTEX_POINT ( 'NONE', #17307 ) ; +#38942 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747186900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#38943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75890, #51089, #57401, #20150 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259781242500E-007, 0.0004559721492004809300 ), + .UNSPECIFIED. ) ; +#38944 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#38945 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#38946 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, -2.499999999999989800, 6.847000845227641200 ) ) ; +#38947 = AXIS2_PLACEMENT_3D ( 'NONE', #65300, #28032, #71515 ) ; +#38948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38949 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 46.72261628933269200, -28.70555803802996700 ) ) ; +#38950 = CONICAL_SURFACE ( 'NONE', #4161, 10.50000000000009600, 0.7853981633974500600 ) ; +#38951 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124984400, 65.13282980700519400, -28.53914313452737900 ) ) ; +#38952 = ORIENTED_EDGE ( 'NONE', *, *, #73614, .T. ) ; +#38953 = EDGE_LOOP ( 'NONE', ( #14599, #48270, #34517, #50940, #48652 ) ) ; +#38954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38955 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#38956 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807117100, 76.79999999999977000, -28.70555803803014400 ) ) ; +#38957 = EDGE_LOOP ( 'NONE', ( #45120, #52224, #30621 ) ) ; +#38958 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.23796787468685900, -28.38801640354855100 ) ) ; +#38959 = AXIS2_PLACEMENT_3D ( 'NONE', #45938, #27225, #2427 ) ; +#38960 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782560200, 60.16054007504464400, -28.34042301926892900 ) ) ; +#38961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38962 = ADVANCED_FACE ( 'NONE', ( #46780 ), #48285, .T. ) ; +#38963 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846183500, 80.79999999999982700, -28.55171188418389100 ) ) ; +#38964 = FACE_OUTER_BOUND ( 'NONE', #22923, .T. ) ; +#38965 = EDGE_LOOP ( 'NONE', ( #56359, #75529, #44809, #73053 ) ) ; +#38966 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#38967 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38968 = ORIENTED_EDGE ( 'NONE', *, *, #1824, .F. ) ; +#38969 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 32.00000000000000700, -1.205558038030002800 ) ) ; +#38970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#38971 = CIRCLE ( 'NONE', #17262, 10.00000000000009600 ) ; +#38972 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#38973 = EDGE_LOOP ( 'NONE', ( #51666, #16613, #70282, #15332, #50994, #50504, #65106, #70866 ) ) ; +#38974 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734533100, 71.32559822014154300, -28.29986836858055100 ) ) ; +#38975 = ORIENTED_EDGE ( 'NONE', *, *, #19387, .T. ) ; +#38976 = ORIENTED_EDGE ( 'NONE', *, *, #59606, .F. ) ; +#38977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38978 = ORIENTED_EDGE ( 'NONE', *, *, #15707, .F. ) ; +#38979 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 96.59999999999999400, 16.29444196196997700 ) ) ; +#38980 = ORIENTED_EDGE ( 'NONE', *, *, #65980, .F. ) ; +#38981 = ADVANCED_FACE ( 'NONE', ( #32217 ), #28370, .T. ) ; +#38982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38984 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#38985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38986 = CARTESIAN_POINT ( 'NONE', ( -15.85159581709219300, 20.66410593582544300, -28.68054222049886800 ) ) ; +#38987 = CARTESIAN_POINT ( 'NONE', ( 6.559481897351430600E-015, 32.92856308690584700, -28.36981695106783600 ) ) ; +#38988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#38989 = CONICAL_SURFACE ( 'NONE', #19752, 10.50000000000009600, 0.7853981633974500600 ) ; +#38990 = ORIENTED_EDGE ( 'NONE', *, *, #43259, .T. ) ; +#38992 = EDGE_CURVE ( 'NONE', #49536, #17080, #39717, .T. ) ; +#38991 = EDGE_LOOP ( 'NONE', ( #17681, #38733, #15894 ) ) ; +#38993 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812300, 59.60439022488336000, -28.70555803802997700 ) ) ; +#38994 = EDGE_LOOP ( 'NONE', ( #44544, #29124, #43198, #31486, #17559 ) ) ; +#38995 = ADVANCED_FACE ( 'NONE', ( #77954 ), #67355, .T. ) ; +#38997 = EDGE_CURVE ( 'NONE', #17606, #74886, #25281, .T. ) ; +#38996 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73324, #29840, #5030, #48517 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786116826900E-007, 0.0007677775503743757200 ), + .UNSPECIFIED. ) ; +#38998 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985147800, 46.50238095238093200, -28.70555803802996700 ) ) ; +#38999 = ORIENTED_EDGE ( 'NONE', *, *, #74456, .F. ) ; +#39000 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999969400, 59.63176086632793000, -28.70555803802997700 ) ) ; +#39001 = EDGE_LOOP ( 'NONE', ( #80485, #56420, #34735 ) ) ; +#39002 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39003 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 42.59027028261002800, -28.70555803802996700 ) ) ; +#39004 = CIRCLE ( 'NONE', #3447, 9.500000000000095900 ) ; +#39005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39006 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 9.589561077180748700, -28.52734861045625100 ) ) ; +#39007 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909300, 66.76150692817284900, -28.68631150211663100 ) ) ; +#39008 = ORIENTED_EDGE ( 'NONE', *, *, #2562, .F. ) ; +#39009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39010 = EDGE_CURVE ( 'NONE', #34788, #77263, #61437, .T. ) ; +#39011 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472982400, 28.63131911501866600, -28.51286550264547900 ) ) ; +#39012 = ADVANCED_FACE ( 'NONE', ( #63380 ), #42892, .F. ) ; +#39013 = ORIENTED_EDGE ( 'NONE', *, *, #78007, .F. ) ; +#39014 = EDGE_CURVE ( 'NONE', #21820, #5932, #59468, .T. ) ; +#39015 = AXIS2_PLACEMENT_3D ( 'NONE', #61667, #24392, #67902 ) ; +#39016 = FACE_OUTER_BOUND ( 'NONE', #23244, .T. ) ; +#39017 = ORIENTED_EDGE ( 'NONE', *, *, #60853, .T. ) ; +#39018 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555584300, 89.72166103827315500, -28.53892303408237300 ) ) ; +#39019 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 3.500000000000007100, 2.454695999814385600 ) ) ; +#39020 = AXIS2_PLACEMENT_3D ( 'NONE', #71619, #34359, #77865 ) ; +#39021 = EDGE_CURVE ( 'NONE', #22718, #61123, #10814, .T. ) ; +#39022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39023 = EDGE_CURVE ( 'NONE', #70202, #2253, #77125, .T. ) ; +#39024 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34301, #77808, #71839, #34579 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690784078700E-007, 0.0007331055842534707500 ), + .UNSPECIFIED. ) ; +#39025 = EDGE_CURVE ( 'NONE', #61551, #61776, #62670, .T. ) ; +#39026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39027 = CARTESIAN_POINT ( 'NONE', ( 17.22115791441229500, 30.93523632220588100, -28.30315276798566200 ) ) ; +#39028 = AXIS2_PLACEMENT_3D ( 'NONE', #48008, #5056, #73349 ) ; +#39029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39030 = ORIENTED_EDGE ( 'NONE', *, *, #17615, .F. ) ; +#39031 = EDGE_LOOP ( 'NONE', ( #31225, #71389, #66289, #22433, #10457 ) ) ; +#39032 = AXIS2_PLACEMENT_3D ( 'NONE', #75741, #38460, #1218 ) ; +#39033 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343041700, 60.65007990305426200, -28.43638873268704600 ) ) ; +#39034 = VERTEX_POINT ( 'NONE', #68153 ) ; +#39035 = EDGE_CURVE ( 'NONE', #55704, #41798, #44804, .T. ) ; +#39036 = AXIS2_PLACEMENT_3D ( 'NONE', #6980, #75270, #44210 ) ; +#39037 = AXIS2_PLACEMENT_3D ( 'NONE', #15304, #58806, #21580 ) ; +#39038 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39039 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39041 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38505, #32038, #50759, #1268 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850289500, 0.0007596411030281055000 ), + .UNSPECIFIED. ) ; +#39042 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#39043 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583833200, 18.58874248361047400, -28.53740755999545800 ) ) ; +#39044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39045 = CIRCLE ( 'NONE', #35150, 10.50000000000009200 ) ; +#39046 = VERTEX_POINT ( 'NONE', #55630 ) ; +#39047 = ORIENTED_EDGE ( 'NONE', *, *, #17497, .F. ) ; +#39048 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#39049 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#39050 = ORIENTED_EDGE ( 'NONE', *, *, #3621, .F. ) ; +#39051 = CONICAL_SURFACE ( 'NONE', #10962, 10.50000000000009600, 0.7853981633974500600 ) ; +#39052 = ORIENTED_EDGE ( 'NONE', *, *, #80039, .T. ) ; +#39053 = AXIS2_PLACEMENT_3D ( 'NONE', #76675, #39417, #2142 ) ; +#39054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39055 = ORIENTED_EDGE ( 'NONE', *, *, #64819, .T. ) ; +#39056 = ORIENTED_EDGE ( 'NONE', *, *, #11634, .F. ) ; +#39057 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#39058 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 81.43650294695081000, -28.30782889147504700 ) ) ; +#39059 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338539400, 17.99322649091128300, -28.30799595738858100 ) ) ; +#39060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39062 = CIRCLE ( 'NONE', #74476, 10.50000000000009400 ) ; +#39063 = ADVANCED_FACE ( 'NONE', ( #75994 ), #57501, .F. ) ; +#39064 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39065 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39066 = AXIS2_PLACEMENT_3D ( 'NONE', #58751, #65038, #76982 ) ; +#39067 = ORIENTED_EDGE ( 'NONE', *, *, #70204, .F. ) ; +#39068 = FACE_OUTER_BOUND ( 'NONE', #56115, .T. ) ; +#39069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39070 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 9.333333333333346400, 5.722645192245503900 ) ) ; +#39071 = ORIENTED_EDGE ( 'NONE', *, *, #63225, .T. ) ; +#39072 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#39073 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958900, 81.46283204837338600, -28.48697406221667400 ) ) ; +#39074 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576700, 20.67701665379184900, -28.20555803802994200 ) ) ; +#39075 = ORIENTED_EDGE ( 'NONE', *, *, #48121, .F. ) ; +#39076 = ORIENTED_EDGE ( 'NONE', *, *, #36440, .T. ) ; +#39077 = ORIENTED_EDGE ( 'NONE', *, *, #49615, .F. ) ; +#39078 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7610, #76161, #14172, #57669 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867039867900E-007, 0.001076778502991284900 ), + .UNSPECIFIED. ) ; +#39079 = VERTEX_POINT ( 'NONE', #18652 ) ; +#39080 = VECTOR ( 'NONE', #65409, 1000.000000000000000 ) ; +#39081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39082 = ADVANCED_FACE ( 'NONE', ( #38039 ), #24423, .T. ) ; +#39083 = AXIS2_PLACEMENT_3D ( 'NONE', #25802, #44759, #63339 ) ; +#39084 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39085 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922514900, 90.09037803491442300, -28.29483400905923000 ) ) ; +#39086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39087 = EDGE_CURVE ( 'NONE', #75104, #35373, #48161, .T. ) ; +#39088 = ORIENTED_EDGE ( 'NONE', *, *, #13582, .F. ) ; +#39089 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280405700, 22.65857157145700600, -28.37229765499279600 ) ) ; +#39090 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#39091 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#39092 = AXIS2_PLACEMENT_3D ( 'NONE', #56874, #19619, #63146 ) ; +#39093 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#39094 = FACE_OUTER_BOUND ( 'NONE', #13498, .T. ) ; +#39095 = ORIENTED_EDGE ( 'NONE', *, *, #32711, .F. ) ; +#39097 = ORIENTED_EDGE ( 'NONE', *, *, #38867, .F. ) ; +#39096 = ADVANCED_FACE ( 'NONE', ( #74073 ), #12686, .T. ) ; +#39098 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 60.34267608797601700, -28.20555803802997700 ) ) ; +#39099 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454045000, 89.08026449164336200, -28.70555803802997700 ) ) ; +#39100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39103 = ADVANCED_FACE ( 'NONE', ( #40960 ), #55549, .T. ) ; +#39104 = EDGE_CURVE ( 'NONE', #29405, #25931, #33745, .T. ) ; +#39105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39107 = EDGE_CURVE ( 'NONE', #41336, #34327, #79913, .T. ) ; +#39108 = ORIENTED_EDGE ( 'NONE', *, *, #6278, .T. ) ; +#39109 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 28.57141756547892100, -28.70555803802994200 ) ) ; +#39110 = VERTEX_POINT ( 'NONE', #43900 ) ; +#39111 = ADVANCED_FACE ( 'NONE', ( #7842 ), #5924, .T. ) ; +#39112 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 53.00000000000000700, -1.205558038030002800 ) ) ; +#39113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39114 = EDGE_CURVE ( 'NONE', #49575, #77015, #19278, .T. ) ; +#39115 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79171, #10889, #60675, #23394 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001043664170964746000 ), + .UNSPECIFIED. ) ; +#39116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39117 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 18.00000000000001400, -1.205558038030005300 ) ) ; +#39118 = EDGE_CURVE ( 'NONE', #19608, #53523, #4802, .T. ) ; +#39119 = CONICAL_SURFACE ( 'NONE', #14740, 10.50000000000009600, 0.7853981633974500600 ) ; +#39120 = ORIENTED_EDGE ( 'NONE', *, *, #44511, .T. ) ; +#39121 = AXIS2_PLACEMENT_3D ( 'NONE', #44012, #56554, #515 ) ; +#39122 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 33.17681279774499400, -28.70555803802996700 ) ) ; +#39123 = FACE_OUTER_BOUND ( 'NONE', #34335, .T. ) ; +#39124 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#39125 = ORIENTED_EDGE ( 'NONE', *, *, #10198, .T. ) ; +#39126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39127 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286463400, 52.66699492863851600, -28.67024809316607700 ) ) ; +#39128 = CIRCLE ( 'NONE', #31964, 10.00000000000009400 ) ; +#39129 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 55.33333333333334300, 4.294441961970000500 ) ) ; +#39130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39131 = ORIENTED_EDGE ( 'NONE', *, *, #37274, .F. ) ; +#39132 = VERTEX_POINT ( 'NONE', #69225 ) ; +#39133 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#39134 = AXIS2_PLACEMENT_3D ( 'NONE', #14965, #33997, #58750 ) ; +#39135 = CONICAL_SURFACE ( 'NONE', #29126, 10.50000000000009600, 0.7853981633974482800 ) ; +#39136 = EDGE_CURVE ( 'NONE', #26388, #14833, #71135, .T. ) ; +#39137 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274710100, 24.55000000000000100, -28.20555803802994200 ) ) ; +#39138 = EDGE_CURVE ( 'NONE', #29475, #54691, #26392, .T. ) ; +#39139 = CARTESIAN_POINT ( 'NONE', ( 16.53469939396887900, 9.232650303015562400, -28.58709120703529600 ) ) ; +#39140 = EDGE_CURVE ( 'NONE', #40419, #80632, #22467, .T. ) ; +#39141 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#39142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39143 = ORIENTED_EDGE ( 'NONE', *, *, #21557, .T. ) ; +#39144 = FACE_OUTER_BOUND ( 'NONE', #52748, .T. ) ; +#39145 = AXIS2_PLACEMENT_3D ( 'NONE', #23965, #36441, #61237 ) ; +#39146 = ORIENTED_EDGE ( 'NONE', *, *, #3764, .T. ) ; +#39147 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818041300, 51.65075715145332700, -28.20555803803005900 ) ) ; +#39148 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 81.08083798124329200, -28.45106778992437700 ) ) ; +#39149 = EDGE_LOOP ( 'NONE', ( #39969, #43772, #31847 ) ) ; +#39150 = CARTESIAN_POINT ( 'NONE', ( 11.44167460485270000, 8.915291560575486300, -28.64723264288321400 ) ) ; +#39151 = VERTEX_POINT ( 'NONE', #19726 ) ; +#39152 = ORIENTED_EDGE ( 'NONE', *, *, #53507, .F. ) ; +#39153 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059900, 57.94142842854297700, -28.37229765499282100 ) ) ; +#39154 = LINE ( 'NONE', #12673, #37210 ) ; +#39155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39157 = ORIENTED_EDGE ( 'NONE', *, *, #37636, .F. ) ; +#39158 = CARTESIAN_POINT ( 'NONE', ( -11.00202872172426200, 20.31091476818470900, -28.25432823872342800 ) ) ; +#39159 = EDGE_CURVE ( 'NONE', #19988, #24233, #9823, .T. ) ; +#39160 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 21.97376207875059600, -28.70555803802995200 ) ) ; +#39161 = FACE_OUTER_BOUND ( 'NONE', #19329, .T. ) ; +#39162 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#39163 = AXIS2_PLACEMENT_3D ( 'NONE', #54767, #5004, #17535 ) ; +#39164 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#39165 = AXIS2_PLACEMENT_3D ( 'NONE', #42320, #5078, #48562 ) ; +#39166 = CARTESIAN_POINT ( 'NONE', ( 8.466819876342331200, 55.79999999999999000, -28.37307693585060900 ) ) ; +#39167 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999941800, 61.96823913367190800, -28.70555803803014400 ) ) ; +#39168 = PLANE ( 'NONE', #63632 ) ; +#39169 = ORIENTED_EDGE ( 'NONE', *, *, #80383, .F. ) ; +#39170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39171 = CARTESIAN_POINT ( 'NONE', ( 17.41531457165560700, 80.41631403997794800, -28.40988208712484600 ) ) ; +#39172 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390325400, 61.46283204837320100, -28.48697406221674200 ) ) ; +#39173 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 58.83333333333332100, -9.205558038030003900 ) ) ; +#39174 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818070600, 61.65075715145340500, -28.20555803803031100 ) ) ; +#39175 = CONICAL_SURFACE ( 'NONE', #727, 10.50000000000009200, 0.7853981633974482800 ) ; +#39176 = VERTEX_POINT ( 'NONE', #13225 ) ; +#39177 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#39178 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#39179 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56251, #12776, #75040, #37743 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625870550326400E-007, 0.0002930369617397597100 ), + .UNSPECIFIED. ) ; +#39180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39181 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39182 = AXIS2_PLACEMENT_3D ( 'NONE', #22677, #53933, #35205 ) ; +#39183 = CARTESIAN_POINT ( 'NONE', ( 16.63895135775479900, 19.45782482474340100, -28.57035285187586000 ) ) ; +#39184 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39185 = CARTESIAN_POINT ( 'NONE', ( -11.50207502155148000, 50.60145251508603800, -28.70555803802997700 ) ) ; +#39186 = AXIS2_PLACEMENT_3D ( 'NONE', #46126, #8863, #52375 ) ; +#39187 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819169800, 69.94924284854653300, -28.20555803803030800 ) ) ; +#39188 = ADVANCED_FACE ( 'NONE', ( #11791 ), #3951, .F. ) ; +#39189 = EDGE_CURVE ( 'NONE', #74705, #32803, #20515, .T. ) ; +#39190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39191 = ORIENTED_EDGE ( 'NONE', *, *, #20100, .T. ) ; +#39192 = AXIS2_PLACEMENT_3D ( 'NONE', #60798, #67040, #54518 ) ; +#39193 = VERTEX_POINT ( 'NONE', #7725 ) ; +#39194 = ADVANCED_FACE ( 'NONE', ( #70131 ), #35141, .F. ) ; +#39195 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 24.00000000000000700, 6.794441961969995200 ) ) ; +#39196 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 60.10230989102911500, -28.61774594594330900 ) ) ; +#39197 = AXIS2_PLACEMENT_3D ( 'NONE', #25347, #31599, #62598 ) ; +#39198 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39199 = VERTEX_POINT ( 'NONE', #70014 ) ; +#39200 = ADVANCED_FACE ( 'NONE', ( #72128 ), #1989, .T. ) ; +#39201 = FACE_OUTER_BOUND ( 'NONE', #13279, .T. ) ; +#39202 = ORIENTED_EDGE ( 'NONE', *, *, #53078, .F. ) ; +#39203 = CIRCLE ( 'NONE', #49763, 10.50000000000009600 ) ; +#39204 = AXIS2_PLACEMENT_3D ( 'NONE', #11922, #12192, #55673 ) ; +#39205 = ORIENTED_EDGE ( 'NONE', *, *, #3283, .F. ) ; +#39206 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 71.25732391202386400, -28.20555803803014400 ) ) ; +#39207 = ORIENTED_EDGE ( 'NONE', *, *, #37123, .T. ) ; +#39208 = FACE_OUTER_BOUND ( 'NONE', #58879, .T. ) ; +#39209 = ORIENTED_EDGE ( 'NONE', *, *, #73257, .F. ) ; +#39210 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 40.30000000000008200, -28.70555803802995200 ) ) ; +#39211 = ORIENTED_EDGE ( 'NONE', *, *, #2760, .F. ) ; +#39212 = ORIENTED_EDGE ( 'NONE', *, *, #74766, .F. ) ; +#39213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39214 = FACE_OUTER_BOUND ( 'NONE', #23245, .T. ) ; +#39215 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39670, #33416, #70941, #33690 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983716875119300E-007, 0.001076779618376418600 ), + .UNSPECIFIED. ) ; +#39216 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#39217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39218 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 67.50000000000002800, -7.061964498581016200 ) ) ; +#39219 = ORIENTED_EDGE ( 'NONE', *, *, #64641, .F. ) ; +#39220 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39221 = CONICAL_SURFACE ( 'NONE', #33686, 10.50000000000009600, 0.7853981633974500600 ) ; +#39222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39223 = EDGE_CURVE ( 'NONE', #29595, #46517, #53607, .T. ) ; +#39224 = EDGE_LOOP ( 'NONE', ( #62742, #16220, #67589 ) ) ; +#39225 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32340, #50521, #1310, #44788 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083003128400E-007, 0.0003101809493109007400 ), + .UNSPECIFIED. ) ; +#39226 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#39228 = EDGE_CURVE ( 'NONE', #79251, #24967, #37042, .T. ) ; +#39227 = VERTEX_POINT ( 'NONE', #1735 ) ; +#39229 = ORIENTED_EDGE ( 'NONE', *, *, #55465, .T. ) ; +#39230 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#39231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39232 = EDGE_LOOP ( 'NONE', ( #58768, #13837, #18397, #15337 ) ) ; +#39233 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77624, #34120, #46581, #9340, #52862, #15624 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 1.558164123622142400E-016, 0.0009708406316374638400, 0.001941681263274772000 ), + .UNSPECIFIED. ) ; +#39234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39235 = CONICAL_SURFACE ( 'NONE', #58040, 10.50000000000009600, 0.7853981633974500600 ) ; +#39236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39238 = EDGE_LOOP ( 'NONE', ( #65283, #29474, #57159, #68362 ) ) ; +#39237 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159813700, 40.40190441413980700, -28.70555803803001600 ) ) ; +#39239 = EDGE_CURVE ( 'NONE', #23233, #30821, #56663, .T. ) ; +#39240 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428121800, 81.52858243452112700, -28.70555803803014400 ) ) ; +#39241 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#39243 = ORIENTED_EDGE ( 'NONE', *, *, #63816, .F. ) ; +#39242 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10896, #54392, #29687, #73187 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549601210800E-007, 0.0008759529789575486400 ), + .UNSPECIFIED. ) ; +#39244 = ORIENTED_EDGE ( 'NONE', *, *, #42997, .T. ) ; +#39245 = CARTESIAN_POINT ( 'NONE', ( -24.88560645924177800, 0.1143935407576744800, -20.53921242634119100 ) ) ; +#39246 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807171300, 74.80000000000001100, -28.70555803802997700 ) ) ; +#39247 = EDGE_CURVE ( 'NONE', #35301, #43792, #42180, .T. ) ; +#39248 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 29.83333333333333600, 0.1341879241256075400 ) ) ; +#39249 = EDGE_CURVE ( 'NONE', #36965, #41201, #68189, .T. ) ; +#39250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39251 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239500, 31.52620220503713000, -28.70555803802995200 ) ) ; +#39252 = ORIENTED_EDGE ( 'NONE', *, *, #49651, .F. ) ; +#39253 = CIRCLE ( 'NONE', #26349, 10.00000000000009200 ) ; +#39254 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725291500, 35.05000000000000400, -28.20555803802995200 ) ) ; +#39255 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146668500, 28.30869142985029200, -28.37223374938520900 ) ) ; +#39256 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 75.79999999999996900, -28.70555803802997700 ) ) ; +#39257 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.43250300240228500, -28.20555803802997700 ) ) ; +#39258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39259 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#39260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39261 = AXIS2_PLACEMENT_3D ( 'NONE', #26442, #7620, #44856 ) ; +#39262 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274330700, 47.43535825203925100, -28.53896444442200300 ) ) ; +#39263 = EDGE_CURVE ( 'NONE', #55143, #16582, #27782, .T. ) ; +#39264 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655600300, 28.42298334620759400, -28.20555803802994500 ) ) ; +#39265 = EDGE_CURVE ( 'NONE', #64266, #70616, #13312, .T. ) ; +#39266 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 51.43945992495533700, -28.34042301926881200 ) ) ; +#39267 = EDGE_CURVE ( 'NONE', #50428, #48103, #79623, .T. ) ; +#39268 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39269 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660918100, 61.46283204837310200, -28.48697406221710100 ) ) ; +#39270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39271 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39273 = AXIS2_PLACEMENT_3D ( 'NONE', #17229, #79520, #42211 ) ; +#39274 = CONICAL_SURFACE ( 'NONE', #61780, 10.00000000000009400, 0.7853981633974447300 ) ; +#39275 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174866200, 80.16054007504448000, -28.34042301926892500 ) ) ; +#39276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39277 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 70.34267608797617300, -28.20555803803014400 ) ) ; +#39278 = ORIENTED_EDGE ( 'NONE', *, *, #68534, .T. ) ; +#39279 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000162500, 88.62623792124919900, -28.70555803803030800 ) ) ; +#39280 = AXIS2_PLACEMENT_3D ( 'NONE', #57918, #64202, #14398 ) ; +#39281 = AXIS2_PLACEMENT_3D ( 'NONE', #78749, #41460, #4198 ) ; +#39282 = CARTESIAN_POINT ( 'NONE', ( -17.40875264640681800, 9.679479877896472600, -28.41157636893868200 ) ) ; +#39283 = AXIS2_PLACEMENT_3D ( 'NONE', #79890, #42596, #5356 ) ; +#39285 = ORIENTED_EDGE ( 'NONE', *, *, #37233, .T. ) ; +#39284 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 70.34267608797603100, -28.20555803802997700 ) ) ; +#39286 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67670, #24159, #5646, #49129 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646193200, 0.0009605145132141883600 ), + .UNSPECIFIED. ) ; +#39287 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 71.52858243452104100, -28.70555803802997700 ) ) ; +#39288 = CIRCLE ( 'NONE', #63123, 9.500000000000099500 ) ; +#39289 = VERTEX_POINT ( 'NONE', #46046 ) ; +#39290 = FACE_OUTER_BOUND ( 'NONE', #21234, .T. ) ; +#39291 = VERTEX_POINT ( 'NONE', #21347 ) ; +#39292 = CIRCLE ( 'NONE', #63668, 10.50000000000009600 ) ; +#39293 = VERTEX_POINT ( 'NONE', #64875 ) ; +#39294 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609161200, 90.13716795162640900, -28.48697406221693000 ) ) ; +#39295 = ORIENTED_EDGE ( 'NONE', *, *, #78837, .T. ) ; +#39296 = VERTEX_POINT ( 'NONE', #77081 ) ; +#39297 = ADVANCED_FACE ( 'NONE', ( #51601 ), #45, .F. ) ; +#39298 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 1.333333333333345900, -3.705558038030004400 ) ) ; +#39299 = AXIS2_PLACEMENT_3D ( 'NONE', #33190, #76698, #39431 ) ; +#39300 = EDGE_CURVE ( 'NONE', #53468, #73484, #16617, .T. ) ; +#39301 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760500, 42.02620220503713700, -28.70555803802996700 ) ) ; +#39302 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39303 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349245900, 39.70543520232828200, -28.70555803802995200 ) ) ; +#39304 = CIRCLE ( 'NONE', #31569, 9.500000000000097700 ) ; +#39305 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#39306 = EDGE_LOOP ( 'NONE', ( #13795, #74856, #68570, #6791 ) ) ; +#39307 = FACE_OUTER_BOUND ( 'NONE', #54535, .T. ) ; +#39308 = ORIENTED_EDGE ( 'NONE', *, *, #53422, .T. ) ; +#39309 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39310 = EDGE_CURVE ( 'NONE', #3004, #64482, #18568, .T. ) ; +#39311 = CARTESIAN_POINT ( 'NONE', ( 17.38218670428396400, 28.39495213045392700, -28.41843566569990300 ) ) ; +#39312 = VERTEX_POINT ( 'NONE', #77359 ) ; +#39313 = AXIS2_PLACEMENT_3D ( 'NONE', #25815, #44507, #63072 ) ; +#39314 = ORIENTED_EDGE ( 'NONE', *, *, #49764, .T. ) ; +#39315 = EDGE_LOOP ( 'NONE', ( #40022, #47075, #41983 ) ) ; +#39316 = FACE_OUTER_BOUND ( 'NONE', #69648, .T. ) ; +#39317 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15353, #9049, #46301, #21616 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678005859500, 0.0007670610367941072400 ), + .UNSPECIFIED. ) ; +#39318 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#39319 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455568600, 69.72166103827333900, -28.53892303408230500 ) ) ; +#39320 = ADVANCED_FACE ( 'NONE', ( #33154 ), #14660, .F. ) ; +#39321 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 75.46616414991841300, -28.37247596307076200 ) ) ; +#39322 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 80.79999999999951400, -28.70555803803047500 ) ) ; +#39323 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002800, 18.53085164125335600, -28.45573375118225100 ) ) ; +#39324 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 66.13383585008146800, -28.37247596307072000 ) ) ; +#39325 = ORIENTED_EDGE ( 'NONE', *, *, #24526, .F. ) ; +#39326 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#39327 = VERTEX_POINT ( 'NONE', #46575 ) ; +#39328 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655695300, 10.17701665379238400, -28.20555803802992800 ) ) ; +#39329 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39330 = ORIENTED_EDGE ( 'NONE', *, *, #63596, .T. ) ; +#39331 = FACE_OUTER_BOUND ( 'NONE', #4344, .T. ) ; +#39332 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39333 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39334 = CARTESIAN_POINT ( 'NONE', ( 11.72076650305771200, 60.09951448976269000, -28.63282631410017100 ) ) ; +#39335 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39336 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39338 = AXIS2_PLACEMENT_3D ( 'NONE', #76947, #39682, #2410 ) ; +#39339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39340 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58566, #39796, #27588, #71078 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549120749300E-007, 0.0008759529789574139900 ), + .UNSPECIFIED. ) ; +#39341 = PLANE ( 'NONE', #63034 ) ; +#39342 = CARTESIAN_POINT ( 'NONE', ( -9.769169305343028900, 70.65007990305427700, -28.43638873268705300 ) ) ; +#39343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39344 = EDGE_CURVE ( 'NONE', #59770, #58204, #65176, .T. ) ; +#39345 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 7.166666666666683800, -9.205558038030003900 ) ) ; +#39346 = CIRCLE ( 'NONE', #22068, 9.500000000000097700 ) ; +#39347 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#39348 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 5.000000000000000000, 16.29444196196998400 ) ) ; +#39349 = ORIENTED_EDGE ( 'NONE', *, *, #17335, .F. ) ; +#39350 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 61.82440674572717400, -28.45987523529583300 ) ) ; +#39351 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39352 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22258, #3737, #10016, #53526 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001020022808752812900, 0.0007606607323828935100 ), + .UNSPECIFIED. ) ; +#39353 = ORIENTED_EDGE ( 'NONE', *, *, #52598, .T. ) ; +#39354 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582500, 65.79999999999982700, -28.70525300642874800 ) ) ; +#39355 = ORIENTED_EDGE ( 'NONE', *, *, #6366, .F. ) ; +#39356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39357 = FACE_OUTER_BOUND ( 'NONE', #64139, .T. ) ; +#39358 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 37.39962244433175400, -28.53664883431609000 ) ) ; +#39359 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274711000, 45.23212903577626800, -28.37244029424742600 ) ) ; +#39360 = FACE_OUTER_BOUND ( 'NONE', #77456, .T. ) ; +#39361 = EDGE_CURVE ( 'NONE', #70191, #74615, #38971, .T. ) ; +#39362 = ORIENTED_EDGE ( 'NONE', *, *, #10452, .F. ) ; +#39363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39364 = EDGE_CURVE ( 'NONE', #52135, #69411, #49652, .T. ) ; +#39365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40619, #78170, #16150, #59682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276997789000E-007, 0.0007677744771234620900 ), + .UNSPECIFIED. ) ; +#39366 = ORIENTED_EDGE ( 'NONE', *, *, #43975, .F. ) ; +#39367 = CIRCLE ( 'NONE', #64161, 10.50000000000009600 ) ; +#39368 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000900, 19.34772751981642700, -28.70555803802998100 ) ) ; +#39369 = CIRCLE ( 'NONE', #11674, 9.500000000000099500 ) ; +#39371 = VERTEX_POINT ( 'NONE', #3077 ) ; +#39370 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310471800, 49.60230989102910100, -28.61774594594331600 ) ) ; +#39372 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39373 = ORIENTED_EDGE ( 'NONE', *, *, #80022, .T. ) ; +#39374 = AXIS2_PLACEMENT_3D ( 'NONE', #48451, #11239, #54727 ) ; +#39375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39376 = EDGE_CURVE ( 'NONE', #34888, #22529, #47716, .T. ) ; +#39377 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#39378 = EDGE_CURVE ( 'NONE', #12513, #39868, #64327, .T. ) ; +#39379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22569, #16319, #78335, #28877 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247638609700, 0.0009605145132133884400 ), + .UNSPECIFIED. ) ; +#39381 = EDGE_CURVE ( 'NONE', #60514, #24570, #31220, .T. ) ; +#39382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39383 = ADVANCED_FACE ( 'NONE', ( #66269 ), #60426, .T. ) ; +#39384 = CONICAL_SURFACE ( 'NONE', #23713, 10.00000000000009200, 0.7853981633974447300 ) ; +#39385 = EDGE_CURVE ( 'NONE', #51254, #26410, #60291, .T. ) ; +#39386 = EDGE_LOOP ( 'NONE', ( #57883, #36219, #23525, #61202 ) ) ; +#39387 = AXIS2_PLACEMENT_3D ( 'NONE', #3697, #47197, #9969 ) ; +#39388 = CONICAL_SURFACE ( 'NONE', #34666, 10.50000000000009600, 0.7853981633974518300 ) ; +#39389 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#39390 = VERTEX_POINT ( 'NONE', #54760 ) ; +#39391 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 30.74660241562181500, -28.20555803802995200 ) ) ; +#39392 = ORIENTED_EDGE ( 'NONE', *, *, #17628, .T. ) ; +#39393 = ORIENTED_EDGE ( 'NONE', *, *, #70476, .T. ) ; +#39394 = VERTEX_POINT ( 'NONE', #42233 ) ; +#39395 = ORIENTED_EDGE ( 'NONE', *, *, #49255, .T. ) ; +#39396 = ADVANCED_FACE ( 'NONE', ( #45752 ), #27326, .F. ) ; +#39397 = FACE_OUTER_BOUND ( 'NONE', #13266, .T. ) ; +#39398 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 50.83333333333335000, -2.545304000185615800 ) ) ; +#39399 = AXIS2_PLACEMENT_3D ( 'NONE', #17574, #61380, #54805 ) ; +#39400 = VERTEX_POINT ( 'NONE', #30062 ) ; +#39401 = AXIS2_PLACEMENT_3D ( 'NONE', #40926, #47142, #28186 ) ; +#39402 = EDGE_LOOP ( 'NONE', ( #51625, #3669, #31471 ) ) ; +#39403 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345602500, 51.52472935029903300, -28.39317435246123700 ) ) ; +#39404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39405 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39406 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 15.83333333333334300, -3.349151577478984600 ) ) ; +#39407 = VERTEX_POINT ( 'NONE', #73554 ) ; +#39408 = EDGE_LOOP ( 'NONE', ( #46129, #59225, #27500 ) ) ; +#39409 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 71.46283204837325800, -28.48697406221693700 ) ) ; +#39410 = ORIENTED_EDGE ( 'NONE', *, *, #76099, .F. ) ; +#39411 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39412 = ADVANCED_FACE ( 'NONE', ( #29302 ), #74990, .F. ) ; +#39413 = CONICAL_SURFACE ( 'NONE', #31462, 10.00000000000009200, 0.7853981633974447300 ) ; +#39414 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 53.16666666666667900, -4.152999154772358800 ) ) ; +#39415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39418 = AXIS2_PLACEMENT_3D ( 'NONE', #69031, #31782, #75288 ) ; +#39419 = EDGE_CURVE ( 'NONE', #6774, #6854, #10762, .T. ) ; +#39420 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621500, 29.33106028708543200, -28.57333386111662700 ) ) ; +#39421 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43085, #80364, #55597, #18355 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466049262590100E-007, 0.0002929914227444423000 ), + .UNSPECIFIED. ) ; +#39422 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153451500, 90.79999999999967000, -28.55171188418384900 ) ) ; +#39423 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194923200, 56.76150692817307700, -28.68631150211662400 ) ) ; +#39424 = ADVANCED_FACE ( 'NONE', ( #43814 ), #25374, .T. ) ; +#39425 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.22261628933270600, -28.70555803802995200 ) ) ; +#39426 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 53.42856308690588900, -28.36981695106780800 ) ) ; +#39427 = CIRCLE ( 'NONE', #53267, 10.00000000000009200 ) ; +#39428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39430 = EDGE_CURVE ( 'NONE', #25412, #30550, #41885, .T. ) ; +#39431 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39432 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188004200, 20.06914835874664500, -28.45573375118225100 ) ) ; +#39433 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #68942 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #43456, #37452, #219 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#39434 = AXIS2_PLACEMENT_3D ( 'NONE', #62032, #24755, #68265 ) ; +#39435 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#39436 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39437 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 71.43945992495532900, -28.34042301926885800 ) ) ; +#39438 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#39440 = EDGE_LOOP ( 'NONE', ( #13809, #19806, #29118 ) ) ; +#39439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39441 = CIRCLE ( 'NONE', #12441, 10.50000000000009600 ) ; +#39442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39443 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498100800, 69.99827085154638000, -28.24094723680271500 ) ) ; +#39444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39445 = ORIENTED_EDGE ( 'NONE', *, *, #21293, .T. ) ; +#39446 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#39447 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618200, 80.79999999999968500, -28.55171188418406200 ) ) ; +#39448 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 101.5999999999999900, -18.70555803803000600 ) ) ; +#39449 = FACE_OUTER_BOUND ( 'NONE', #43180, .T. ) ; +#39450 = FACE_OUTER_BOUND ( 'NONE', #12053, .T. ) ; +#39451 = EDGE_LOOP ( 'NONE', ( #68069, #19797, #16318 ) ) ; +#39452 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 56.66666666666667900, 5.722645192245505700 ) ) ; +#39453 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39454 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39455 = CIRCLE ( 'NONE', #56254, 10.00000000000009200 ) ; +#39456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39457 = ORIENTED_EDGE ( 'NONE', *, *, #66461, .T. ) ; +#39458 = ORIENTED_EDGE ( 'NONE', *, *, #2548, .F. ) ; +#39459 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498100100, 89.99827085154638000, -28.24094723680271500 ) ) ; +#39460 = AXIS2_PLACEMENT_3D ( 'NONE', #44401, #7170, #50675 ) ; +#39461 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39462 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583910900, 20.01125751638927900, -28.53740755999534400 ) ) ; +#39463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33456, #70710, #2428, #45940 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367399379100, 0.0005556746457753992300 ), + .UNSPECIFIED. ) ; +#39464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39465 = FACE_OUTER_BOUND ( 'NONE', #11380, .T. ) ; +#39466 = CONICAL_SURFACE ( 'NONE', #32509, 10.00000000000009200, 0.7853981633974447300 ) ; +#39467 = EDGE_LOOP ( 'NONE', ( #46167, #15847, #15789 ) ) ; +#39468 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#39469 = EDGE_LOOP ( 'NONE', ( #9558, #32959, #41257, #77204 ) ) ; +#39470 = VERTEX_POINT ( 'NONE', #49010 ) ; +#39471 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#39472 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30570, #74077, #49269, #12058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082045858500E-007, 0.001119323292485937100 ), + .UNSPECIFIED. ) ; +#39473 = EDGE_LOOP ( 'NONE', ( #71404, #7764, #53470 ) ) ; +#39474 = ORIENTED_EDGE ( 'NONE', *, *, #52961, .F. ) ; +#39475 = CARTESIAN_POINT ( 'NONE', ( 1.783306465195845700, 80.79999999999999700, -28.32841359973439000 ) ) ; +#39476 = ORIENTED_EDGE ( 'NONE', *, *, #57300, .T. ) ; +#39477 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 21.83333333333334600, -9.205558038030003900 ) ) ; +#39478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39479 = FACE_OUTER_BOUND ( 'NONE', #26506, .T. ) ; +#39480 = ORIENTED_EDGE ( 'NONE', *, *, #43685, .F. ) ; +#39481 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#39482 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471826900, 39.13131911501876200, -28.51286550264508800 ) ) ; +#39483 = ADVANCED_FACE ( 'NONE', ( #58438 ), #56476, .T. ) ; +#39484 = FACE_OUTER_BOUND ( 'NONE', #68819, .T. ) ; +#39485 = EDGE_CURVE ( 'NONE', #40239, #67155, #45759, .T. ) ; +#39486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39487 = ORIENTED_EDGE ( 'NONE', *, *, #78007, .T. ) ; +#39488 = CIRCLE ( 'NONE', #40243, 10.50000000000009600 ) ; +#39489 = EDGE_CURVE ( 'NONE', #301, #61855, #76935, .T. ) ; +#39490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39491 = ADVANCED_FACE ( 'NONE', ( #73051 ), #6849, .F. ) ; +#39492 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 60.16054007504464400, -28.34042301926881200 ) ) ; +#39493 = EDGE_CURVE ( 'NONE', #22802, #36626, #31365, .T. ) ; +#39494 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 30.93250300240229200, -28.20555803802996700 ) ) ; +#39495 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 65.33333333333334300, 5.722645192245503900 ) ) ; +#39496 = EDGE_CURVE ( 'NONE', #43346, #30703, #12726, .T. ) ; +#39497 = AXIS2_PLACEMENT_3D ( 'NONE', #25634, #38090, #62886 ) ; +#39498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39499 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39500 = FACE_OUTER_BOUND ( 'NONE', #78225, .T. ) ; +#39501 = ADVANCED_FACE ( 'NONE', ( #8769 ), #37965, .T. ) ; +#39502 = CARTESIAN_POINT ( 'NONE', ( -11.46986311119036400, 9.146957350529760300, -28.66910751791843700 ) ) ; +#39503 = CIRCLE ( 'NONE', #72330, 10.00000000000009200 ) ; +#39504 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39505 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489670800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#39506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39508 = ORIENTED_EDGE ( 'NONE', *, *, #17003, .T. ) ; +#39509 = FACE_OUTER_BOUND ( 'NONE', #59661, .T. ) ; +#39510 = CARTESIAN_POINT ( 'NONE', ( 10.22115791441229100, 41.43523632220588100, -28.30315276798567200 ) ) ; +#39511 = AXIS2_PLACEMENT_3D ( 'NONE', #7982, #51481, #14266 ) ; +#39512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39513 = VERTEX_POINT ( 'NONE', #37312 ) ; +#39514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39515 = EDGE_CURVE ( 'NONE', #16784, #55877, #16897, .T. ) ; +#39516 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51092, #32380, #38601, #13897 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286991308300E-007, 0.0007303759720891763100 ), + .UNSPECIFIED. ) ; +#39517 = EDGE_CURVE ( 'NONE', #29405, #55213, #2396, .T. ) ; +#39518 = ADVANCED_FACE ( 'NONE', ( #39942 ), #4895, .T. ) ; +#39519 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39521 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39520 = AXIS2_PLACEMENT_3D ( 'NONE', #5491, #11758, #42727 ) ; +#39522 = CARTESIAN_POINT ( 'NONE', ( -19.41519222706117600, 1.169615545877854300, -23.43868275677219900 ) ) ; +#39523 = FACE_OUTER_BOUND ( 'NONE', #28135, .T. ) ; +#39524 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498193900, 10.10172914845360900, -28.24094723680242000 ) ) ; +#39525 = CONICAL_SURFACE ( 'NONE', #65795, 10.00000000000009200, 0.7853981633974447300 ) ; +#39526 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 27.66666666666667100, -3.705558038030004400 ) ) ; +#39527 = ORIENTED_EDGE ( 'NONE', *, *, #25717, .F. ) ; +#39528 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488151300, 69.60439022488344600, -28.70555803803014400 ) ) ; +#39529 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39530 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.16749699759768800, -28.20555803802995200 ) ) ; +#39531 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 79.97246552159074900, -28.38801640354893500 ) ) ; +#39532 = ORIENTED_EDGE ( 'NONE', *, *, #3766, .T. ) ; +#39533 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#39534 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428600900, 60.07141756547895300, -28.70555803802997700 ) ) ; +#39535 = EDGE_CURVE ( 'NONE', #67038, #55309, #23405, .T. ) ; +#39536 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 51.62753447840886200, -28.38801640354855800 ) ) ; +#39538 = VERTEX_POINT ( 'NONE', #37586 ) ; +#39537 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#39539 = ADVANCED_FACE ( 'NONE', ( #71079 ), #43838, .T. ) ; +#39540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39541 = AXIS2_PLACEMENT_3D ( 'NONE', #78629, #29152, #22842 ) ; +#39542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39543 = AXIS2_PLACEMENT_3D ( 'NONE', #33267, #76777, #39506 ) ; +#39544 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 9.722944711948574800, -28.20555803802994200 ) ) ; +#39545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39546 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428614700, 15.92318720225486000, -28.70555803803042500 ) ) ; +#39547 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#39548 = CARTESIAN_POINT ( 'NONE', ( -0.8538690485112069300, 8.865230368351724600, -28.64096433122108800 ) ) ; +#39549 = CIRCLE ( 'NONE', #24657, 10.00000000000009200 ) ; +#39550 = PLANE ( 'NONE', #53957 ) ; +#39551 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286467500, 52.66699492863742200, -28.67024809316608400 ) ) ; +#39552 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943633700, 14.05000000000011400, -28.70555803803025800 ) ) ; +#39553 = EDGE_LOOP ( 'NONE', ( #69791, #24738, #24250 ) ) ; +#39554 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 71.43945992495517300, -28.34042301926893600 ) ) ; +#39555 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 43.65857157145691000, -28.20555803802997700 ) ) ; +#39556 = ORIENTED_EDGE ( 'NONE', *, *, #26633, .T. ) ; +#39557 = EDGE_LOOP ( 'NONE', ( #47501, #52184, #50452 ) ) ; +#39558 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#39559 = AXIS2_PLACEMENT_3D ( 'NONE', #5293, #55054, #11572 ) ; +#39560 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76988, #64521, #2440, #45959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647894252800E-007, 0.0007596411030280939000 ), + .UNSPECIFIED. ) ; +#39561 = VERTEX_POINT ( 'NONE', #50082 ) ; +#39562 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260013100, 28.70034312068831600, -28.70555803803001600 ) ) ; +#39563 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906698000, 81.67036336027379700, -28.27338767626477200 ) ) ; +#39564 = CIRCLE ( 'NONE', #56828, 9.500000000000099500 ) ; +#39565 = CIRCLE ( 'NONE', #79108, 10.00000000000009200 ) ; +#39566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50813, #7312, #57117, #19856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669796446112100E-007, 0.0005050252131279747800 ), + .UNSPECIFIED. ) ; +#39568 = PLANE ( 'NONE', #6893 ) ; +#39569 = EDGE_LOOP ( 'NONE', ( #48782, #45608, #39353, #74936, #75534 ) ) ; +#39570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39571 = ORIENTED_EDGE ( 'NONE', *, *, #39515, .F. ) ; +#39572 = FACE_OUTER_BOUND ( 'NONE', #74973, .T. ) ; +#39573 = AXIS2_PLACEMENT_3D ( 'NONE', #70701, #39692, #27220 ) ; +#39574 = ORIENTED_EDGE ( 'NONE', *, *, #49693, .T. ) ; +#39575 = FACE_OUTER_BOUND ( 'NONE', #56498, .T. ) ; +#39576 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52760, #9224, #65331, #28059 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659355400, 0.0005685240369918452900 ), + .UNSPECIFIED. ) ; +#39577 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#39578 = CIRCLE ( 'NONE', #44901, 10.50000000000009400 ) ; +#39579 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, -0.8333333333333262600, 0.1341879241256129200 ) ) ; +#39580 = AXIS2_PLACEMENT_3D ( 'NONE', #16686, #29250, #53930 ) ; +#39581 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 80.51916201875670300, -28.45106778992437700 ) ) ; +#39582 = EDGE_LOOP ( 'NONE', ( #42269, #41793, #39775 ) ) ; +#39583 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260017700, 49.70034312068833800, -28.70555803803001600 ) ) ; +#39584 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#39585 = EDGE_CURVE ( 'NONE', #35436, #63087, #68734, .T. ) ; +#39586 = AXIS2_PLACEMENT_3D ( 'NONE', #3536, #40810, #71843 ) ; +#39587 = CONICAL_SURFACE ( 'NONE', #29275, 10.00000000000009200, 0.7853981633974447300 ) ; +#39588 = VERTEX_POINT ( 'NONE', #62927 ) ; +#39589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39591 = FACE_OUTER_BOUND ( 'NONE', #74003, .T. ) ; +#39592 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39593 = ORIENTED_EDGE ( 'NONE', *, *, #38919, .T. ) ; +#39594 = CIRCLE ( 'NONE', #46714, 10.00000000000009200 ) ; +#39595 = ADVANCED_FACE ( 'NONE', ( #21470 ), #19500, .T. ) ; +#39596 = ORIENTED_EDGE ( 'NONE', *, *, #48541, .F. ) ; +#39597 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39598 = CARTESIAN_POINT ( 'NONE', ( 1.298084469544156900, 9.866352599407848700, -28.70555803803002000 ) ) ; +#39599 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24787, #18795, #37528, #282 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287100512100E-007, 0.0002670038068533863800 ), + .UNSPECIFIED. ) ; +#39600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39601 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39602 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 42.66666666666667900, -10.73183747965883100 ) ) ; +#39603 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39604 = FACE_OUTER_BOUND ( 'NONE', #48332, .T. ) ; +#39605 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339071400, 51.46283204837340700, -28.48697406221673100 ) ) ; +#39606 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#39607 = FACE_OUTER_BOUND ( 'NONE', #516, .T. ) ; +#39608 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39610 = EDGE_CURVE ( 'NONE', #28286, #5959, #54261, .T. ) ; +#39609 = VERTEX_POINT ( 'NONE', #38123 ) ; +#39611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39612 = ADVANCED_FACE ( 'NONE', ( #52558 ), #67194, .F. ) ; +#39613 = EDGE_CURVE ( 'NONE', #7230, #52334, #39806, .T. ) ; +#39614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39615 = CARTESIAN_POINT ( 'NONE', ( -11.46762026031822400, 94.26940775139536300, -28.34592507370791000 ) ) ; +#39616 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39617 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853324900, 28.30869142985022800, -28.37223374938530200 ) ) ; +#39618 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39619 = ADVANCED_FACE ( 'NONE', ( #69130 ), #56928, .T. ) ; +#39620 = ORIENTED_EDGE ( 'NONE', *, *, #57860, .F. ) ; +#39621 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#39622 = EDGE_CURVE ( 'NONE', #5379, #38201, #25380, .T. ) ; +#39623 = ADVANCED_FACE ( 'NONE', ( #36045 ), #17558, .T. ) ; +#39624 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448300, 85.79999999999998300, -28.20555803802997700 ) ) ; +#39625 = EDGE_CURVE ( 'NONE', #55930, #5802, #34092, .T. ) ; +#39626 = CARTESIAN_POINT ( 'NONE', ( 4.036255108181464400, 89.94924284854707300, -28.20555803803014100 ) ) ; +#39627 = CIRCLE ( 'NONE', #16805, 9.500000000000099500 ) ; +#39628 = AXIS2_PLACEMENT_3D ( 'NONE', #22180, #22444, #9936 ) ; +#39629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39630 = VERTEX_POINT ( 'NONE', #13946 ) ; +#39631 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 5.000000000000004400, 6.794441961969995200 ) ) ; +#39632 = VERTEX_POINT ( 'NONE', #1415 ) ; +#39633 = CARTESIAN_POINT ( 'NONE', ( -16.88106447389087000, 60.49763722318499500, -28.32100408376067300 ) ) ; +#39634 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627436000, 57.93535825203924400, -28.53896444442202500 ) ) ; +#39635 = ORIENTED_EDGE ( 'NONE', *, *, #58349, .T. ) ; +#39636 = EDGE_LOOP ( 'NONE', ( #64993, #61598, #71125, #74678 ) ) ; +#39637 = CARTESIAN_POINT ( 'NONE', ( -10.70417714314167100, 9.519451428761128000, -28.52576311647842300 ) ) ; +#39638 = CIRCLE ( 'NONE', #32278, 10.50000000000009600 ) ; +#39639 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079885500, 9.933836696121284500, -28.27375072930953700 ) ) ; +#39640 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39642 = VERTEX_POINT ( 'NONE', #44892 ) ; +#39641 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39643 = AXIS2_PLACEMENT_3D ( 'NONE', #42844, #67613, #36586 ) ; +#39644 = EDGE_CURVE ( 'NONE', #12178, #4437, #2937, .T. ) ; +#39645 = EDGE_CURVE ( 'NONE', #37342, #14529, #62359, .T. ) ; +#39646 = EDGE_CURVE ( 'NONE', #66808, #21792, #10904, .T. ) ; +#39647 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39648 = CONICAL_SURFACE ( 'NONE', #28400, 10.50000000000009600, 0.7853981633974500600 ) ; +#39649 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#39650 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286482800, 58.93300507136160600, -28.67024809316606200 ) ) ; +#39651 = AXIS2_PLACEMENT_3D ( 'NONE', #69480, #32230, #75729 ) ; +#39652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39653 = VERTEX_POINT ( 'NONE', #57714 ) ; +#39654 = EDGE_LOOP ( 'NONE', ( #27628, #20576, #50136, #66597, #44826 ) ) ; +#39655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 5.551115123125783700E-016 ) ) ; +#39656 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67265, #23763, #73529, #36254 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799646171300E-007, 0.0005050252131287511800 ), + .UNSPECIFIED. ) ; +#39657 = PLANE ( 'NONE', #3062 ) ; +#39658 = CONICAL_SURFACE ( 'NONE', #59510, 10.50000000000009400, 0.7853981633974500600 ) ; +#39659 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 81.46283204837340000, -28.48697406221667100 ) ) ; +#39660 = EDGE_CURVE ( 'NONE', #1113, #25185, #77211, .T. ) ; +#39661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39662 = AXIS2_PLACEMENT_3D ( 'NONE', #79656, #5131, #36155 ) ; +#39663 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#39664 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999930700, 77.70389005397376500, -28.37519436813202100 ) ) ; +#39665 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 40.89456479767167000, -28.70555803802996700 ) ) ; +#39666 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39667 = ORIENTED_EDGE ( 'NONE', *, *, #47222, .F. ) ; +#39668 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702741000, 69.37488905616109500, -28.55192314908464400 ) ) ; +#39669 = CIRCLE ( 'NONE', #58872, 10.50000000000009600 ) ; +#39671 = ORIENTED_EDGE ( 'NONE', *, *, #31345, .T. ) ; +#39670 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148420900, 44.59761904761919000, -28.70555803802996700 ) ) ; +#39672 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#39673 = CONICAL_SURFACE ( 'NONE', #48742, 10.50000000000009600, 0.7853981633974500600 ) ; +#39674 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 48.66666666666667100, 1.294441961969997200 ) ) ; +#39675 = AXIS2_PLACEMENT_3D ( 'NONE', #13584, #69313, #7274 ) ; +#39676 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#39677 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#39678 = EDGE_LOOP ( 'NONE', ( #12586, #7381, #33490, #73694 ) ) ; +#39679 = CARTESIAN_POINT ( 'NONE', ( -1.272691540716739000, 55.79999999999976300, -28.53979898350171500 ) ) ; +#39680 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 13.66666666666667700, 2.794441961969992100 ) ) ; +#39681 = AXIS2_PLACEMENT_3D ( 'NONE', #12863, #25370, #50056 ) ; +#39682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39683 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39684 = CONICAL_SURFACE ( 'NONE', #57287, 10.00000000000009200, 0.7853981633974447300 ) ; +#39685 = ORIENTED_EDGE ( 'NONE', *, *, #3865, .F. ) ; +#39686 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39687 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 51.00000000000000700, -1.205558038030002800 ) ) ; +#39688 = EDGE_LOOP ( 'NONE', ( #52642, #75012, #49461, #1564 ) ) ; +#39689 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472982400, 28.63131911501866600, -28.51286550264547900 ) ) ; +#39690 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#39691 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9910, #47137, #59697, #22427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.796294493718590200E-007, 0.0007679767755145127100 ), + .UNSPECIFIED. ) ; +#39692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39693 = FACE_OUTER_BOUND ( 'NONE', #71870, .T. ) ; +#39694 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39695 = CONICAL_SURFACE ( 'NONE', #31350, 10.00000000000009200, 0.7853981633974447300 ) ; +#39696 = VERTEX_POINT ( 'NONE', #57989 ) ; +#39697 = ORIENTED_EDGE ( 'NONE', *, *, #28715, .T. ) ; +#39698 = AXIS2_PLACEMENT_3D ( 'NONE', #4174, #72472, #60223 ) ; +#39699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39700 = ORIENTED_EDGE ( 'NONE', *, *, #55142, .T. ) ; +#39701 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21123, #58363, #33608, #77129 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203483666106700E-007, 0.0008990233139251996300 ), + .UNSPECIFIED. ) ; +#39702 = VERTEX_POINT ( 'NONE', #39196 ) ; +#39703 = ORIENTED_EDGE ( 'NONE', *, *, #30074, .T. ) ; +#39704 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328924500, 41.73798719401658300, -28.29447340919114900 ) ) ; +#39705 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#39706 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 83.65857157145681800, -28.20555803803047800 ) ) ; +#39707 = EDGE_LOOP ( 'NONE', ( #70757, #69138, #61663 ) ) ; +#39708 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 71.43650294695081000, -28.30782889147504400 ) ) ; +#39709 = CARTESIAN_POINT ( 'NONE', ( 7.806255641895631900E-015, 25.72261628933269900, -28.70555803802994200 ) ) ; +#39710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32937, #70188, #51664, #14456 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207941517400E-007, 0.0008724366121409659300 ), + .UNSPECIFIED. ) ; +#39711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39712 = CARTESIAN_POINT ( 'NONE', ( 4.722391605212648000, 50.55000000000001100, -28.70555803803009800 ) ) ; +#39713 = ADVANCED_FACE ( 'NONE', ( #54534 ), #15599, .T. ) ; +#39714 = ORIENTED_EDGE ( 'NONE', *, *, #9458, .F. ) ; +#39715 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#39716 = ADVANCED_FACE ( 'NONE', ( #78920 ), #63305, .T. ) ; +#39717 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11342, #48544, #61117, #23856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711248893500E-007, 0.0008482615949371491400 ), + .UNSPECIFIED. ) ; +#39718 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#39719 = PLANE ( 'NONE', #11611 ) ; +#39720 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#39721 = CONICAL_SURFACE ( 'NONE', #11047, 10.50000000000009600, 0.7853981633974500600 ) ; +#39722 = EDGE_CURVE ( 'NONE', #80471, #72130, #79834, .T. ) ; +#39723 = ORIENTED_EDGE ( 'NONE', *, *, #53958, .T. ) ; +#39724 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 54.49999999999998600, -7.061964498581022400 ) ) ; +#39725 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39726 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39727 = ORIENTED_EDGE ( 'NONE', *, *, #71957, .T. ) ; +#39728 = EDGE_CURVE ( 'NONE', #46699, #3936, #48653, .T. ) ; +#39729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39730 = CIRCLE ( 'NONE', #18276, 10.50000000000009600 ) ; +#39731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39732 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819213700, 71.65075715145309200, -28.20555803802997700 ) ) ; +#39733 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39734 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#39735 = EDGE_CURVE ( 'NONE', #19038, #30914, #62771, .T. ) ; +#39736 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432712300, 18.35339758437789800, -28.20555803803009500 ) ) ; +#39737 = ORIENTED_EDGE ( 'NONE', *, *, #48643, .T. ) ; +#39738 = ADVANCED_FACE ( 'NONE', ( #978 ), #77877, .T. ) ; +#39739 = EDGE_CURVE ( 'NONE', #79978, #49536, #13670, .T. ) ; +#39740 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39741 = EDGE_CURVE ( 'NONE', #51554, #2862, #48253, .T. ) ; +#39742 = FACE_OUTER_BOUND ( 'NONE', #22689, .T. ) ; +#39743 = ORIENTED_EDGE ( 'NONE', *, *, #17003, .F. ) ; +#39744 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39745 = ORIENTED_EDGE ( 'NONE', *, *, #56417, .F. ) ; +#39746 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70868, #2307, #46093, #52340 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248238200, 0.0008027336008623712800 ), + .UNSPECIFIED. ) ; +#39747 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39748 = EDGE_LOOP ( 'NONE', ( #18331, #73138, #29616, #6749 ) ) ; +#39749 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 19.66666666666667100, 5.722645192245505700 ) ) ; +#39750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39751 = EDGE_CURVE ( 'NONE', #2167, #42624, #33830, .T. ) ; +#39752 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41736, #79041, #54250, #17010 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004034700 ), + .UNSPECIFIED. ) ; +#39753 = EDGE_CURVE ( 'NONE', #5138, #19093, #19364, .T. ) ; +#39754 = EDGE_CURVE ( 'NONE', #62602, #72036, #32146, .T. ) ; +#39755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39756 = AXIS2_PLACEMENT_3D ( 'NONE', #13283, #37994, #26060 ) ; +#39757 = FACE_OUTER_BOUND ( 'NONE', #18045, .T. ) ; +#39758 = ORIENTED_EDGE ( 'NONE', *, *, #64789, .T. ) ; +#39759 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.16749699759768800, -28.20555803802995200 ) ) ; +#39760 = ORIENTED_EDGE ( 'NONE', *, *, #36637, .T. ) ; +#39761 = AXIS2_PLACEMENT_3D ( 'NONE', #61349, #24074, #67577 ) ; +#39762 = AXIS2_PLACEMENT_3D ( 'NONE', #32064, #69318, #38281 ) ; +#39763 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492457900, 30.39456479767170500, -28.70555803802995200 ) ) ; +#39764 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39765 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 63.16666666666667900, -9.205558038030003900 ) ) ; +#39766 = CONICAL_SURFACE ( 'NONE', #34771, 10.00000000000009200, 0.7853981633974415100 ) ; +#39767 = ORIENTED_EDGE ( 'NONE', *, *, #28715, .F. ) ; +#39768 = CONICAL_SURFACE ( 'NONE', #27658, 10.00000000000009200, 0.7853981633974447300 ) ; +#39769 = ORIENTED_EDGE ( 'NONE', *, *, #38295, .F. ) ; +#39770 = ORIENTED_EDGE ( 'NONE', *, *, #74513, .T. ) ; +#39771 = EDGE_LOOP ( 'NONE', ( #6443, #48975, #4068, #72881 ) ) ; +#39772 = CONICAL_SURFACE ( 'NONE', #49622, 10.00000000000009200, 0.7853981633974447300 ) ; +#39773 = VERTEX_POINT ( 'NONE', #78385 ) ; +#39774 = VERTEX_POINT ( 'NONE', #16368 ) ; +#39775 = ORIENTED_EDGE ( 'NONE', *, *, #52220, .T. ) ; +#39776 = ORIENTED_EDGE ( 'NONE', *, *, #24620, .F. ) ; +#39777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39778 = EDGE_LOOP ( 'NONE', ( #52485, #76134, #34484, #10654 ) ) ; +#39779 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844496800, 85.46616414991841300, -28.37247596307076200 ) ) ; +#39780 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 41.78933626866496800, -28.53923937255172300 ) ) ; +#39781 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498000, 70.16054007504415300, -28.34042301926921700 ) ) ; +#39782 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#39783 = AXIS2_PLACEMENT_3D ( 'NONE', #61411, #18130, #61671 ) ; +#39784 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 51.62753447840886200, -28.38801640354855800 ) ) ; +#39785 = ORIENTED_EDGE ( 'NONE', *, *, #72333, .F. ) ; +#39786 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#39787 = ADVANCED_FACE ( 'NONE', ( #30229 ), #11714, .T. ) ; +#39788 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#39789 = ORIENTED_EDGE ( 'NONE', *, *, #58557, .F. ) ; +#39790 = CARTESIAN_POINT ( 'NONE', ( -20.54877962962102700, 7.225610185189943900, -27.04757241307995500 ) ) ; +#39791 = FACE_OUTER_BOUND ( 'NONE', #61389, .T. ) ; +#39792 = CARTESIAN_POINT ( 'NONE', ( 8.314034490221695600, 35.04999999999997600, -28.37321477197629300 ) ) ; +#39793 = ORIENTED_EDGE ( 'NONE', *, *, #79112, .F. ) ; +#39794 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 25.50000000000000700, 2.454695999814380200 ) ) ; +#39795 = VERTEX_POINT ( 'NONE', #72407 ) ; +#39796 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 87.70389005397393600, -28.37519436813182900 ) ) ; +#39797 = ORIENTED_EDGE ( 'NONE', *, *, #13917, .T. ) ; +#39799 = EDGE_CURVE ( 'NONE', #20052, #21332, #28284, .T. ) ; +#39798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66013, #59488, #35016, #78536 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207925857400E-007, 0.0008724366121410536500 ), + .UNSPECIFIED. ) ; +#39800 = ORIENTED_EDGE ( 'NONE', *, *, #65466, .T. ) ; +#39801 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187775700, 51.60186521182759400, -28.24089224568519500 ) ) ; +#39802 = ORIENTED_EDGE ( 'NONE', *, *, #63970, .F. ) ; +#39803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39804 = AXIS2_PLACEMENT_3D ( 'NONE', #47672, #10448, #53948 ) ; +#39805 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567157600, 28.85339758437810400, -28.20555803802994200 ) ) ; +#39806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25935, #63195, #38387, #1135 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562423100, 0.001296017758337971000 ), + .UNSPECIFIED. ) ; +#39807 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39808 = CONICAL_SURFACE ( 'NONE', #53650, 10.00000000000009600, 0.7853981633974482800 ) ; +#39809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39811 = ADVANCED_FACE ( 'NONE', ( #44723 ), #42811, .T. ) ; +#39812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39813 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 18.13131911501876600, -28.51286550264506300 ) ) ; +#39814 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495010900, 31.40771342879321900, -28.53891855579988900 ) ) ; +#39815 = CARTESIAN_POINT ( 'NONE', ( -7.899665551839508000, 80.79999999999999700, -28.20555803802989600 ) ) ; +#39816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39817 = VERTEX_POINT ( 'NONE', #16625 ) ; +#39818 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.43250300240229200, -28.20555803802997700 ) ) ; +#39819 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39820 = CARTESIAN_POINT ( 'NONE', ( -15.24268566510272300, 9.878657167448636800, -28.70261278770272600 ) ) ; +#39821 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48457, #73517, #11513, #55001 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354307292000E-007, 0.0004318366892330684600 ), + .UNSPECIFIED. ) ; +#39822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39823 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39825 = AXIS2_PLACEMENT_3D ( 'NONE', #73690, #36391, #79947 ) ; +#39826 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544432300, 69.72166103827328200, -28.53892303408230200 ) ) ; +#39827 = CONICAL_SURFACE ( 'NONE', #68170, 10.50000000000009600, 0.7853981633974500600 ) ; +#39828 = ORIENTED_EDGE ( 'NONE', *, *, #6191, .F. ) ; +#39829 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39830 = ORIENTED_EDGE ( 'NONE', *, *, #33432, .T. ) ; +#39831 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046500, 70.29722425778766100, -28.32715733700501900 ) ) ; +#39832 = VERTEX_POINT ( 'NONE', #66404 ) ; +#39833 = CARTESIAN_POINT ( 'NONE', ( 4.239894507328266100, 51.93585231025954800, -28.38420446581291800 ) ) ; +#39834 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567155400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#39835 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943328200, 24.54999999999998600, -28.70555803802994200 ) ) ; +#39836 = AXIS2_PLACEMENT_3D ( 'NONE', #36304, #42541, #73576 ) ; +#39837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35848, #73119, #4825, #48327 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005783220423748065700, 0.006247607834334078000 ), + .UNSPECIFIED. ) ; +#39838 = CARTESIAN_POINT ( 'NONE', ( -3.464812346016866900, 9.406791769321907600, -28.68794773163824300 ) ) ; +#39839 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999626100, 74.13556610137278800, -28.54207364681969100 ) ) ; +#39840 = ADVANCED_FACE ( 'NONE', ( #59384 ), #9747, .F. ) ; +#39841 = EDGE_CURVE ( 'NONE', #54597, #34797, #4904, .T. ) ; +#39842 = CONICAL_SURFACE ( 'NONE', #58241, 10.50000000000009600, 0.7853981633974500600 ) ; +#39843 = CONICAL_SURFACE ( 'NONE', #23363, 10.00000000000009600, 0.7853981633974482800 ) ; +#39844 = EDGE_LOOP ( 'NONE', ( #37041, #41945, #21935, #42285 ) ) ; +#39845 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 69.16666666666665700, -3.349151577478988200 ) ) ; +#39846 = ORIENTED_EDGE ( 'NONE', *, *, #75305, .T. ) ; +#39847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5978, #49453, #12240, #55728 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671484908600E-007, 0.0007670610367944446400 ), + .UNSPECIFIED. ) ; +#39848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39849 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39850 = FACE_OUTER_BOUND ( 'NONE', #8071, .T. ) ; +#39851 = ORIENTED_EDGE ( 'NONE', *, *, #48408, .T. ) ; +#39852 = PLANE ( 'NONE', #52920 ) ; +#39853 = FACE_OUTER_BOUND ( 'NONE', #22700, .T. ) ; +#39854 = ORIENTED_EDGE ( 'NONE', *, *, #68466, .F. ) ; +#39856 = EDGE_CURVE ( 'NONE', #40811, #12827, #71220, .T. ) ; +#39855 = ORIENTED_EDGE ( 'NONE', *, *, #28719, .T. ) ; +#39857 = EDGE_CURVE ( 'NONE', #80236, #33714, #26317, .T. ) ; +#39858 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39859 = FACE_OUTER_BOUND ( 'NONE', #25348, .T. ) ; +#39860 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39861 = VERTEX_POINT ( 'NONE', #35666 ) ; +#39862 = ORIENTED_EDGE ( 'NONE', *, *, #18633, .T. ) ; +#39863 = EDGE_LOOP ( 'NONE', ( #68198, #62362, #35087, #45530, #12385, #25444, #17440 ) ) ; +#39864 = VERTEX_POINT ( 'NONE', #60437 ) ; +#39865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39866 = ORIENTED_EDGE ( 'NONE', *, *, #16891, .T. ) ; +#39867 = ORIENTED_EDGE ( 'NONE', *, *, #56286, .T. ) ; +#39868 = VERTEX_POINT ( 'NONE', #79189 ) ; +#39869 = EDGE_CURVE ( 'NONE', #60567, #38741, #75918, .T. ) ; +#39870 = EDGE_CURVE ( 'NONE', #60356, #3260, #56756, .T. ) ; +#39871 = CARTESIAN_POINT ( 'NONE', ( -3.243064933257743900, 71.43482203710631500, -28.29548531138976800 ) ) ; +#39872 = EDGE_CURVE ( 'NONE', #74631, #73926, #50600, .T. ) ; +#39873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39874 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300911100, 58.40378923506907700, -28.61864990621732100 ) ) ; +#39875 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39876 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39877 = CARTESIAN_POINT ( 'NONE', ( -10.46947945219829500, 91.59999999999999400, -28.70555803802999500 ) ) ; +#39878 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 40.50000000000000000, 6.847000845227646500 ) ) ; +#39879 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39880 = CIRCLE ( 'NONE', #76081, 9.500000000000097700 ) ; +#39881 = AXIS2_PLACEMENT_3D ( 'NONE', #25371, #56898, #850 ) ; +#39882 = ORIENTED_EDGE ( 'NONE', *, *, #51135, .T. ) ; +#39883 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#39884 = ORIENTED_EDGE ( 'NONE', *, *, #63266, .F. ) ; +#39885 = CARTESIAN_POINT ( 'NONE', ( 17.14620600645649900, 52.51871030405739300, -28.47270666107737500 ) ) ; +#39886 = ORIENTED_EDGE ( 'NONE', *, *, #38752, .F. ) ; +#39887 = ORIENTED_EDGE ( 'NONE', *, *, #71942, .T. ) ; +#39888 = VERTEX_POINT ( 'NONE', #54679 ) ; +#39889 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#39890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#39891 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 41.24660241562189400, -28.20555803802996700 ) ) ; +#39892 = CIRCLE ( 'NONE', #48834, 10.50000000000009800 ) ; +#39893 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #43922, #6677 ) ; +#39894 = VERTEX_POINT ( 'NONE', #67204 ) ; +#39895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39896 = AXIS2_PLACEMENT_3D ( 'NONE', #68781, #31535, #75043 ) ; +#39897 = ORIENTED_EDGE ( 'NONE', *, *, #20119, .F. ) ; +#39898 = VERTEX_POINT ( 'NONE', #11185 ) ; +#39899 = ADVANCED_FACE ( 'NONE', ( #61362 ), #7760, .T. ) ; +#39900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39902 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660888200, 80.13716795162605400, -28.48697406221736400 ) ) ; +#39903 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 2.833333333333345000, -9.205558038030003900 ) ) ; +#39904 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819702700, 81.65075715145306400, -28.20555803803014100 ) ) ; +#39905 = CIRCLE ( 'NONE', #4552, 10.50000000000009600 ) ; +#39906 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 60.79999999999998300, -28.55171188418376400 ) ) ; +#39907 = ORIENTED_EDGE ( 'NONE', *, *, #65643, .F. ) ; +#39908 = ORIENTED_EDGE ( 'NONE', *, *, #57856, .F. ) ; +#39909 = VERTEX_POINT ( 'NONE', #5176 ) ; +#39910 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462301200, 61.39409401757607300, -28.39369363572379300 ) ) ; +#39911 = ADVANCED_FACE ( 'NONE', ( #24341 ), #55467, .F. ) ; +#39912 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#39913 = EDGE_CURVE ( 'NONE', #75825, #55704, #42278, .T. ) ; +#39914 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#39915 = CARTESIAN_POINT ( 'NONE', ( -10.60962834309945400, 8.516676710273198800, -28.59744054000112000 ) ) ; +#39916 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326900, 60.79999999999991200, -28.55171188418385200 ) ) ; +#39917 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 9.940690926013795400, -28.35186440610855000 ) ) ; +#39918 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51888, #70685, #8659, #52164 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025930300, 0.0006251342085520260800 ), + .UNSPECIFIED. ) ; +#39919 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39921 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472529100, 24.86787096422377300, -28.37244029424742900 ) ) ; +#39922 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690204100, 85.79999999999967000, -28.70555803803030800 ) ) ; +#39923 = CONICAL_SURFACE ( 'NONE', #52619, 10.50000000000009600, 0.7853981633974500600 ) ; +#39924 = ADVANCED_FACE ( 'NONE', ( #57430 ), #22391, .T. ) ; +#39925 = EDGE_CURVE ( 'NONE', #7843, #69496, #27870, .T. ) ; +#39926 = ORIENTED_EDGE ( 'NONE', *, *, #19275, .T. ) ; +#39927 = CARTESIAN_POINT ( 'NONE', ( 3.221157914412295900, 41.43523632220588100, -28.30315276798567200 ) ) ; +#39928 = ORIENTED_EDGE ( 'NONE', *, *, #79558, .T. ) ; +#39929 = AXIS2_PLACEMENT_3D ( 'NONE', #44154, #68957, #674 ) ; +#39930 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 10.17701665379185300, -28.20555803802992800 ) ) ; +#39931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51134, #7920, #26731, #70205 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882715944300E-007, 0.0004435496461727859100 ), + .UNSPECIFIED. ) ; +#39932 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.86203212531317100, -28.38801640354855500 ) ) ; +#39933 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 90.16054007504463600, -28.34042301926880800 ) ) ; +#39934 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#39935 = ADVANCED_FACE ( 'NONE', ( #72048 ), #70053, .T. ) ; +#39936 = CIRCLE ( 'NONE', #73252, 10.00000000000009200 ) ; +#39937 = ORIENTED_EDGE ( 'NONE', *, *, #57652, .T. ) ; +#39938 = AXIS2_PLACEMENT_3D ( 'NONE', #69365, #50570, #25877 ) ; +#39939 = VERTEX_POINT ( 'NONE', #74007 ) ; +#39940 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939080600, 46.18533208989821000, -28.53910738522653300 ) ) ; +#39941 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 12.16666666666667300, 9.794441961969994300 ) ) ; +#39942 = FACE_OUTER_BOUND ( 'NONE', #22072, .T. ) ; +#39943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44841, #69893, #7877, #51358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629347723897800E-007, 0.0007670609591623582300 ), + .UNSPECIFIED. ) ; +#39944 = ORIENTED_EDGE ( 'NONE', *, *, #65981, .F. ) ; +#39945 = ORIENTED_EDGE ( 'NONE', *, *, #33064, .T. ) ; +#39946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39948 = ORIENTED_EDGE ( 'NONE', *, *, #10481, .T. ) ; +#39947 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309802100, 75.79999999999999700, -28.70555803802997700 ) ) ; +#39949 = ORIENTED_EDGE ( 'NONE', *, *, #45645, .T. ) ; +#39950 = ADVANCED_FACE ( 'NONE', ( #38901 ), #36962, .T. ) ; +#39951 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 46.50000000000001400, -4.865812075874393000 ) ) ; +#39952 = AXIS2_PLACEMENT_3D ( 'NONE', #27481, #33710, #8925 ) ; +#39953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29564, #23272, #54260, #73057 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925591345000E-007, 0.0004084731003435250100 ), + .UNSPECIFIED. ) ; +#39954 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844441900, 55.79999999999975600, -28.20555803803014400 ) ) ; +#39955 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 11.50000000000002300, -7.061964498581016200 ) ) ; +#39956 = VERTEX_POINT ( 'NONE', #5716 ) ; +#39957 = CONICAL_SURFACE ( 'NONE', #64089, 10.00000000000009200, 0.7853981633974447300 ) ; +#39958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39959 = EDGE_CURVE ( 'NONE', #62327, #32617, #53529, .T. ) ; +#39960 = VERTEX_POINT ( 'NONE', #18233 ) ; +#39961 = ORIENTED_EDGE ( 'NONE', *, *, #46391, .F. ) ; +#39962 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39963 = ORIENTED_EDGE ( 'NONE', *, *, #46200, .F. ) ; +#39964 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368700, 70.79999999999998300, -28.55171188418375600 ) ) ; +#39965 = ORIENTED_EDGE ( 'NONE', *, *, #54252, .T. ) ; +#39966 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 48.83333333333334300, 1.741883078712340300 ) ) ; +#39967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#39968 = VERTEX_POINT ( 'NONE', #49195 ) ; +#39969 = ORIENTED_EDGE ( 'NONE', *, *, #37159, .F. ) ; +#39970 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#39971 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105215700, 81.31766786975353500, -28.25051428653849000 ) ) ; +#39972 = CONICAL_SURFACE ( 'NONE', #24329, 10.50000000000009600, 0.7853981633974500600 ) ; +#39973 = ORIENTED_EDGE ( 'NONE', *, *, #41873, .T. ) ; +#39974 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567148300, 49.85339758437810100, -28.20555803802996700 ) ) ; +#39975 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39976 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526982600, 51.58737389638847800, -28.29936525552462400 ) ) ; +#39977 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169300, 61.25732391202397100, -28.20555803802997700 ) ) ; +#39978 = EDGE_CURVE ( 'NONE', #19681, #18334, #40879, .T. ) ; +#39979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39980 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 65.79999999999998300, -28.20555803802997700 ) ) ; +#39981 = CIRCLE ( 'NONE', #77469, 10.50000000000009600 ) ; +#39982 = ORIENTED_EDGE ( 'NONE', *, *, #37684, .F. ) ; +#39983 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39985 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39988 = AXIS2_PLACEMENT_3D ( 'NONE', #27274, #71032, #70754 ) ; +#39989 = EDGE_CURVE ( 'NONE', #54546, #5327, #65272, .T. ) ; +#39990 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385219800, 28.49322649091141500, -28.30799595738879400 ) ) ; +#39991 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29315, #23017, #35279, #72793 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213689337400E-007, 0.0008724366121415440300 ), + .UNSPECIFIED. ) ; +#39992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39993 = EDGE_CURVE ( 'NONE', #57282, #66170, #13408, .T. ) ; +#39994 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344316200, 28.42298334620755500, -28.20555803802994900 ) ) ; +#39995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#39996 = AXIS2_PLACEMENT_3D ( 'NONE', #72805, #35560, #79072 ) ; +#39997 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 52.33333333333334300, 2.794441961969998300 ) ) ; +#39998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#39999 = ORIENTED_EDGE ( 'NONE', *, *, #43877, .T. ) ; +#40000 = VERTEX_POINT ( 'NONE', #37229 ) ; +#40001 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#40002 = VERTEX_POINT ( 'NONE', #80781 ) ; +#40003 = ADVANCED_FACE ( 'NONE', ( #73996 ), #18485, .F. ) ; +#40004 = AXIS2_PLACEMENT_3D ( 'NONE', #8579, #14861, #45826 ) ; +#40005 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 44.66666666666667100, 5.722645192245505700 ) ) ; +#40006 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#40007 = AXIS2_PLACEMENT_3D ( 'NONE', #66648, #41869, #4620 ) ; +#40008 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40009 = EDGE_CURVE ( 'NONE', #70776, #45119, #35063, .T. ) ; +#40010 = EDGE_CURVE ( 'NONE', #53533, #6075, #79706, .T. ) ; +#40011 = AXIS2_PLACEMENT_3D ( 'NONE', #57556, #20306, #63835 ) ; +#40012 = VECTOR ( 'NONE', #17918, 1000.000000000000000 ) ; +#40013 = ORIENTED_EDGE ( 'NONE', *, *, #25097, .T. ) ; +#40014 = ORIENTED_EDGE ( 'NONE', *, *, #32132, .F. ) ; +#40015 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40016 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 46.66666666666668600, -8.133761268305512700 ) ) ; +#40017 = ADVANCED_FACE ( 'NONE', ( #51530 ), #49571, .F. ) ; +#40018 = VERTEX_POINT ( 'NONE', #12794 ) ; +#40019 = FACE_OUTER_BOUND ( 'NONE', #47618, .T. ) ; +#40020 = ORIENTED_EDGE ( 'NONE', *, *, #32374, .T. ) ; +#40021 = ORIENTED_EDGE ( 'NONE', *, *, #52814, .F. ) ; +#40022 = ORIENTED_EDGE ( 'NONE', *, *, #39489, .F. ) ; +#40023 = ADVANCED_FACE ( 'NONE', ( #3868 ), #49993, .T. ) ; +#40025 = EDGE_LOOP ( 'NONE', ( #35747, #38437, #54952 ) ) ; +#40024 = EDGE_CURVE ( 'NONE', #46801, #21936, #1916, .T. ) ; +#40026 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 17.50000000000000400, -7.061964498581022400 ) ) ; +#40027 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#40028 = ORIENTED_EDGE ( 'NONE', *, *, #75196, .T. ) ; +#40029 = AXIS2_PLACEMENT_3D ( 'NONE', #46579, #9336, #52859 ) ; +#40030 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #25260, 'distance_accuracy_value', 'NONE'); +#40031 = AXIS2_PLACEMENT_3D ( 'NONE', #29903, #79636, #11379 ) ; +#40032 = CONICAL_SURFACE ( 'NONE', #4640, 10.00000000000009400, 0.7853981633974447300 ) ; +#40033 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40034 = ADVANCED_FACE ( 'NONE', ( #46703 ), #64254, .F. ) ; +#40035 = CONICAL_SURFACE ( 'NONE', #56185, 10.50000000000009600, 0.7853981633974500600 ) ; +#40036 = ORIENTED_EDGE ( 'NONE', *, *, #14723, .T. ) ; +#40037 = VERTEX_POINT ( 'NONE', #62831 ) ; +#40038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8142, #45393, #14443, #57948 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694887957000E-007, 0.0008724363063899950600 ), + .UNSPECIFIED. ) ; +#40039 = ORIENTED_EDGE ( 'NONE', *, *, #72316, .T. ) ; +#40040 = EDGE_LOOP ( 'NONE', ( #7847, #44828, #32870 ) ) ; +#40041 = VERTEX_POINT ( 'NONE', #69068 ) ; +#40042 = FACE_OUTER_BOUND ( 'NONE', #21547, .T. ) ; +#40043 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428598300, 31.02858243452103400, -28.70555803802996700 ) ) ; +#40044 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310551700, 71.49769010897077200, -28.61774594594320900 ) ) ; +#40045 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 61.00000000000001400, 6.794441961969995200 ) ) ; +#40046 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #43616, #6381 ) ; +#40047 = CONICAL_SURFACE ( 'NONE', #32085, 10.00000000000009200, 0.7853981633974447300 ) ; +#40048 = ORIENTED_EDGE ( 'NONE', *, *, #55242, .F. ) ; +#40049 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40050 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027364400, 79.37488905616132200, -28.55192314908443400 ) ) ; +#40051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40053 = AXIS2_PLACEMENT_3D ( 'NONE', #997, #57050, #19789 ) ; +#40054 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40055 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25885, #63151, #75630, #38346 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641855781966400E-007, 0.0008759659331882802600 ), + .UNSPECIFIED. ) ; +#40057 = CARTESIAN_POINT ( 'NONE', ( 17.04027359854960700, 28.72437813624630100, -28.30310527599299400 ) ) ; +#40058 = EDGE_CURVE ( 'NONE', #26910, #25682, #65282, .T. ) ; +#40059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40060 = CARTESIAN_POINT ( 'NONE', ( -15.71193568073205400, 9.288064319267944000, -28.68299730642571900 ) ) ; +#40061 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 23.33333333333335000, -5.535685056952199400 ) ) ; +#40062 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#40063 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.23796787468678800, -28.38801640354855500 ) ) ; +#40064 = ORIENTED_EDGE ( 'NONE', *, *, #8757, .T. ) ; +#40065 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40067 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901105000, 41.53732497909474100, -28.41043597897444800 ) ) ; +#40068 = EDGE_LOOP ( 'NONE', ( #8297, #13155, #66892, #70943, #18094, #78309, #20145, #46076 ) ) ; +#40069 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510364300, 39.15930907398620100, -28.35186440610857500 ) ) ; +#40070 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#40071 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#40072 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806990500, 66.79999999999964200, -28.70555803802997700 ) ) ; +#40073 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40074 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198452400, 70.90033558196107300, -28.70555803802997700 ) ) ; +#40075 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804098000, 15.94142842854297200, -28.37229765499280300 ) ) ; +#40076 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 47.44142842854306300, -28.20555803802996700 ) ) ; +#40077 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42471, #24274, #43014, #5775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206598839900E-005, 0.001076779618376413800 ), + .UNSPECIFIED. ) ; +#40078 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 60.34267608797603800, -28.20555803802997700 ) ) ; +#40079 = CONICAL_SURFACE ( 'NONE', #46507, 10.50000000000009600, 0.7853981633974518300 ) ; +#40080 = EDGE_LOOP ( 'NONE', ( #15941, #49570, #42878, #22874 ) ) ; +#40081 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736705500, 35.04999999999999700, -28.70555803802995200 ) ) ; +#40082 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40083 = ORIENTED_EDGE ( 'NONE', *, *, #3733, .F. ) ; +#40084 = EDGE_CURVE ( 'NONE', #53696, #8615, #66191, .T. ) ; +#40085 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 51.43650294695131500, -28.30782889147482400 ) ) ; +#40086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40087 = VERTEX_POINT ( 'NONE', #50529 ) ; +#40088 = FACE_OUTER_BOUND ( 'NONE', #27328, .T. ) ; +#40089 = EDGE_CURVE ( 'NONE', #4270, #36904, #16545, .T. ) ; +#40090 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40091 = VERTEX_POINT ( 'NONE', #7037 ) ; +#40092 = ORIENTED_EDGE ( 'NONE', *, *, #66534, .T. ) ; +#40093 = ORIENTED_EDGE ( 'NONE', *, *, #54714, .F. ) ; +#40094 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40095 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40096 = ORIENTED_EDGE ( 'NONE', *, *, #41750, .F. ) ; +#40097 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 43.65857157145701700, -28.20555803802997700 ) ) ; +#40098 = FACE_OUTER_BOUND ( 'NONE', #76761, .T. ) ; +#40099 = EDGE_CURVE ( 'NONE', #4580, #24198, #80771, .T. ) ; +#40100 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#40101 = EDGE_CURVE ( 'NONE', #80692, #5460, #50740, .T. ) ; +#40102 = ORIENTED_EDGE ( 'NONE', *, *, #10810, .F. ) ; +#40103 = AXIS2_PLACEMENT_3D ( 'NONE', #11528, #17775, #73533 ) ; +#40104 = CIRCLE ( 'NONE', #894, 2.499999999999998700 ) ; +#40105 = ORIENTED_EDGE ( 'NONE', *, *, #39753, .T. ) ; +#40106 = VERTEX_POINT ( 'NONE', #32341 ) ; +#40107 = ORIENTED_EDGE ( 'NONE', *, *, #43864, .T. ) ; +#40108 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32420, #38638, #1400, #44875, #7639, #51127 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002059335602003182800, 0.004118671204006365600 ), + .UNSPECIFIED. ) ; +#40109 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730100800, 80.01262610361146700, -28.29936525552464100 ) ) ; +#40110 = FACE_OUTER_BOUND ( 'NONE', #14585, .T. ) ; +#40111 = EDGE_LOOP ( 'NONE', ( #66819, #45039, #19087 ) ) ; +#40112 = ADVANCED_FACE ( 'NONE', ( #20445 ), #62277, .T. ) ; +#40113 = LINE ( 'NONE', #17300, #21650 ) ; +#40114 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 67.00000000000000000, -1.205558038030005300 ) ) ; +#40115 = AXIS2_PLACEMENT_3D ( 'NONE', #27484, #70974, #33717 ) ; +#40116 = EDGE_CURVE ( 'NONE', #32622, #77335, #68116, .T. ) ; +#40117 = EDGE_CURVE ( 'NONE', #6772, #35438, #36312, .T. ) ; +#40118 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 20.44069092601378700, -28.35186440610856500 ) ) ; +#40119 = EDGE_CURVE ( 'NONE', #53616, #80393, #21862, .T. ) ; +#40120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40121 = ADVANCED_FACE ( 'NONE', ( #33067 ), #76853, .T. ) ; +#40122 = AXIS2_PLACEMENT_3D ( 'NONE', #3300, #46810, #9564 ) ; +#40123 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922516000, 51.50962196508484000, -28.29483400905903800 ) ) ; +#40124 = AXIS2_PLACEMENT_3D ( 'NONE', #35206, #78722, #41429 ) ; +#40125 = FACE_OUTER_BOUND ( 'NONE', #67849, .T. ) ; +#40126 = VERTEX_POINT ( 'NONE', #57618 ) ; +#40127 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#40128 = AXIS2_PLACEMENT_3D ( 'NONE', #63174, #25910, #69398 ) ; +#40129 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 30.96868088498121500, -28.51286550264512000 ) ) ; +#40130 = EDGE_CURVE ( 'NONE', #49395, #46150, #7368, .T. ) ; +#40131 = AXIS2_PLACEMENT_3D ( 'NONE', #14404, #51889, #64211 ) ; +#40132 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40133 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495026000, 31.40771342879321900, -28.53891855579988900 ) ) ; +#40134 = ADVANCED_FACE ( 'NONE', ( #12643 ), #43731, .F. ) ; +#40135 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000469800, 90.69949493661177100, -28.70555803803014400 ) ) ; +#40136 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#40137 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 38.33333333333333600, -6.705558038030005700 ) ) ; +#40138 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434400, 53.66464174796018900, -28.53896444442245100 ) ) ; +#40139 = CARTESIAN_POINT ( 'NONE', ( 15.99167745881062100, 85.79999999999984100, -28.49360982174035300 ) ) ; +#40140 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40141 = ORIENTED_EDGE ( 'NONE', *, *, #67778, .F. ) ; +#40142 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#40143 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40144 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#40146 = VERTEX_POINT ( 'NONE', #51592 ) ; +#40145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40147 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123097100, 29.28860447109613200, -28.53900456328625500 ) ) ; +#40148 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76280, #76551, #14558, #58065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251704500, 0.003631405919786732800 ), + .UNSPECIFIED. ) ; +#40149 = CARTESIAN_POINT ( 'NONE', ( 17.50829783853938100, 92.85414891926969000, -28.38587011735776100 ) ) ; +#40150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40151 = CIRCLE ( 'NONE', #38649, 10.00000000000009200 ) ; +#40152 = AXIS2_PLACEMENT_3D ( 'NONE', #9687, #53189, #15945 ) ; +#40153 = ORIENTED_EDGE ( 'NONE', *, *, #11594, .F. ) ; +#40154 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.16749699759769500, -28.20555803802997700 ) ) ; +#40155 = CIRCLE ( 'NONE', #38324, 10.00000000000009200 ) ; +#40156 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504983800, 41.90771342879322200, -28.53891855579990300 ) ) ; +#40157 = ORIENTED_EDGE ( 'NONE', *, *, #52347, .T. ) ; +#40158 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 0.6666666666666765100, 5.722645192245505700 ) ) ; +#40159 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#40160 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300913600, 73.19621076493004400, -28.61864990621748800 ) ) ; +#40161 = FACE_OUTER_BOUND ( 'NONE', #39408, .T. ) ; +#40162 = ORIENTED_EDGE ( 'NONE', *, *, #34643, .F. ) ; +#40163 = ORIENTED_EDGE ( 'NONE', *, *, #20816, .T. ) ; +#40164 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#40165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40166 = AXIS2_PLACEMENT_3D ( 'NONE', #56136, #50120, #12917 ) ; +#40167 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40169 = FACE_OUTER_BOUND ( 'NONE', #896, .T. ) ; +#40170 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40172 = EDGE_CURVE ( 'NONE', #26714, #49034, #60346, .T. ) ; +#40173 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444315800, 59.72166103827328200, -28.53892303408230500 ) ) ; +#40174 = ORIENTED_EDGE ( 'NONE', *, *, #21442, .T. ) ; +#40175 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752500, 32.09027028261002100, -28.70555803802995600 ) ) ; +#40176 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#40177 = FACE_OUTER_BOUND ( 'NONE', #36259, .T. ) ; +#40178 = AXIS2_PLACEMENT_3D ( 'NONE', #38538, #57343, #20098 ) ; +#40179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40180 = ORIENTED_EDGE ( 'NONE', *, *, #48326, .T. ) ; +#40181 = VERTEX_POINT ( 'NONE', #45337 ) ; +#40182 = ORIENTED_EDGE ( 'NONE', *, *, #46275, .T. ) ; +#40183 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877843900, 20.02667319908792400, -28.37233769390153200 ) ) ; +#40184 = FACE_OUTER_BOUND ( 'NONE', #74713, .T. ) ; +#40185 = ORIENTED_EDGE ( 'NONE', *, *, #71066, .F. ) ; +#40186 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965400, 39.15930907398619400, -28.35186440610857500 ) ) ; +#40187 = FACE_OUTER_BOUND ( 'NONE', #18375, .T. ) ; +#40188 = CARTESIAN_POINT ( 'NONE', ( -16.62383503578070400, 9.214590232756293600, -28.57283534926718700 ) ) ; +#40189 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041000, 77.94142842854287800, -28.20555803803047800 ) ) ; +#40190 = ADVANCED_FACE ( 'NONE', ( #78843 ), #74913, .T. ) ; +#40191 = EDGE_LOOP ( 'NONE', ( #78123, #45604, #60203, #615, #72920 ) ) ; +#40192 = EDGE_CURVE ( 'NONE', #57688, #39390, #10687, .T. ) ; +#40193 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#40194 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#40195 = CONICAL_SURFACE ( 'NONE', #49672, 10.50000000000009600, 0.7853981633974500600 ) ; +#40196 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576917600, 45.54999999999999000, -28.65220501466659500 ) ) ; +#40197 = ORIENTED_EDGE ( 'NONE', *, *, #24542, .T. ) ; +#40198 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 10.00000000000001100, -12.20555803803000200 ) ) ; +#40199 = CIRCLE ( 'NONE', #58120, 10.00000000000009600 ) ; +#40200 = EDGE_CURVE ( 'NONE', #38688, #79988, #29229, .T. ) ; +#40201 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80323, #17779, #49273, #12060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002317346715348124500, 0.0006984166105118073300 ), + .UNSPECIFIED. ) ; +#40202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40203 = ADVANCED_FACE ( 'NONE', ( #27248 ), #8702, .T. ) ; +#40204 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 44.33333333333334300, 3.124568980892187500 ) ) ; +#40205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40206 = EDGE_CURVE ( 'NONE', #30703, #7698, #25293, .T. ) ; +#40207 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609141700, 70.13716795162640900, -28.48697406221694500 ) ) ; +#40208 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 9.333333333333346400, 5.722645192245503900 ) ) ; +#40209 = EDGE_CURVE ( 'NONE', #57367, #66366, #73724, .T. ) ; +#40210 = AXIS2_PLACEMENT_3D ( 'NONE', #30929, #61945, #68172 ) ; +#40211 = CARTESIAN_POINT ( 'NONE', ( -17.03178561562176100, 51.31767869357339900, -28.25052235028429900 ) ) ; +#40212 = EDGE_CURVE ( 'NONE', #37852, #28145, #59248, .T. ) ; +#40213 = PLANE ( 'NONE', #43142 ) ; +#40214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40215 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 46.66666666666667900, -6.705558038030000400 ) ) ; +#40216 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660897100, 70.13716795162599700, -28.48697406221726800 ) ) ; +#40217 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#40218 = EDGE_LOOP ( 'NONE', ( #14729, #6972, #20066 ) ) ; +#40220 = ORIENTED_EDGE ( 'NONE', *, *, #76567, .T. ) ; +#40219 = EDGE_CURVE ( 'NONE', #36794, #75589, #44731, .T. ) ; +#40221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40222 = EDGE_CURVE ( 'NONE', #45119, #9002, #47637, .T. ) ; +#40223 = EDGE_CURVE ( 'NONE', #56537, #41981, #31146, .T. ) ; +#40224 = ORIENTED_EDGE ( 'NONE', *, *, #28360, .T. ) ; +#40225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40226 = ADVANCED_FACE ( 'NONE', ( #41806 ), #6769, .F. ) ; +#40227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40228 = CONICAL_SURFACE ( 'NONE', #1617, 10.00000000000009400, 0.7853981633974447300 ) ; +#40229 = VERTEX_POINT ( 'NONE', #71482 ) ; +#40230 = FACE_OUTER_BOUND ( 'NONE', #59202, .T. ) ; +#40231 = ORIENTED_EDGE ( 'NONE', *, *, #67557, .T. ) ; +#40232 = AXIS2_PLACEMENT_3D ( 'NONE', #17611, #67371, #54841 ) ; +#40233 = FACE_OUTER_BOUND ( 'NONE', #36000, .T. ) ; +#40234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40235 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769061700, 50.28860447109610700, -28.53900456328626900 ) ) ; +#40236 = CARTESIAN_POINT ( 'NONE', ( 15.05232299489569100, 85.84127283767757900, -28.70545439276234100 ) ) ; +#40237 = ORIENTED_EDGE ( 'NONE', *, *, #72668, .F. ) ; +#40238 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 81.25732391202397800, -28.20555803802997700 ) ) ; +#40239 = VERTEX_POINT ( 'NONE', #40455 ) ; +#40240 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 50.90033558196108000, -28.70555803802997700 ) ) ; +#40241 = EDGE_CURVE ( 'NONE', #5959, #28518, #30359, .T. ) ; +#40242 = VERTEX_POINT ( 'NONE', #46689 ) ; +#40243 = AXIS2_PLACEMENT_3D ( 'NONE', #65561, #28321, #71798 ) ; +#40244 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#40245 = AXIS2_PLACEMENT_3D ( 'NONE', #59695, #22425, #65953 ) ; +#40246 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62387, #25411, #44097, #6886 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526869221100E-007, 0.0007303749718167623700 ), + .UNSPECIFIED. ) ; +#40247 = FACE_OUTER_BOUND ( 'NONE', #76088, .T. ) ; +#40248 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#40249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40250 = ORIENTED_EDGE ( 'NONE', *, *, #77196, .F. ) ; +#40251 = CONICAL_SURFACE ( 'NONE', #53466, 10.50000000000009900, 0.7853981633974518300 ) ; +#40252 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.16666666666667900, -3.349151577478988200 ) ) ; +#40253 = EDGE_LOOP ( 'NONE', ( #6151, #62902, #24672 ) ) ; +#40254 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428612900, 49.57141756547894600, -28.70555803802996700 ) ) ; +#40255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40256 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78443, #34927, #10162, #53664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983720959801700E-007, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#40257 = ORIENTED_EDGE ( 'NONE', *, *, #36056, .F. ) ; +#40258 = ORIENTED_EDGE ( 'NONE', *, *, #66595, .T. ) ; +#40259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40260 = ORIENTED_EDGE ( 'NONE', *, *, #80275, .T. ) ; +#40261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12470, #49682, #55964, #18719 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241069400, 0.0005195704752304447500 ), + .UNSPECIFIED. ) ; +#40262 = CONICAL_SURFACE ( 'NONE', #22076, 10.00000000000009200, 0.7853981633974447300 ) ; +#40263 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 4.999999999999997300, 16.29444196196998700 ) ) ; +#40264 = PLANE ( 'NONE', #2457 ) ; +#40265 = AXIS2_PLACEMENT_3D ( 'NONE', #10100, #53614, #16367 ) ; +#40266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40268 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31170, #61908, #49869, #12670 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.430543460228409900E-017, 0.001707792749031543900 ), + .UNSPECIFIED. ) ; +#40270 = ORIENTED_EDGE ( 'NONE', *, *, #42343, .F. ) ; +#40271 = AXIS2_PLACEMENT_3D ( 'NONE', #39606, #76596, #2323 ) ; +#40272 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150699400, 41.32033471810044000, -28.30868034705252600 ) ) ; +#40273 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 48.83333333333334300, 6.794441961969994300 ) ) ; +#40274 = EDGE_LOOP ( 'NONE', ( #54832, #64361, #70093 ) ) ; +#40275 = EDGE_CURVE ( 'NONE', #30876, #9140, #15867, .T. ) ; +#40276 = CIRCLE ( 'NONE', #54422, 10.00000000000009600 ) ; +#40277 = AXIS2_PLACEMENT_3D ( 'NONE', #48141, #10919, #54420 ) ; +#40278 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702727600, 82.22511094383828800, -28.55192314908445200 ) ) ; +#40279 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 15.33333333333334500, 2.794441961969998300 ) ) ; +#40280 = AXIS2_PLACEMENT_3D ( 'NONE', #69046, #38019, #25563 ) ; +#40281 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40283 = ADVANCED_FACE ( 'NONE', ( #23327 ), #54453, .T. ) ; +#40284 = AXIS2_PLACEMENT_3D ( 'NONE', #69741, #57508, #44945 ) ; +#40285 = CIRCLE ( 'NONE', #54958, 10.00000000000009200 ) ; +#40286 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567157600, 28.85339758437810400, -28.20555803802994200 ) ) ; +#40287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40288 = ORIENTED_EDGE ( 'NONE', *, *, #19899, .F. ) ; +#40289 = ADVANCED_FACE ( 'NONE', ( #39859 ), #21385, .T. ) ; +#40290 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 18.66666666666667100, -5.535685056952199400 ) ) ; +#40291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40292 = ORIENTED_EDGE ( 'NONE', *, *, #40101, .T. ) ; +#40293 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52142, #45886, #20916, #14920 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019568659430100E-007, 0.0004669842289004804800 ), + .UNSPECIFIED. ) ; +#40294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40295 = CARTESIAN_POINT ( 'NONE', ( -17.03244381443369100, 63.20063685273898100, -28.49841021997938000 ) ) ; +#40296 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 58.83333333333332100, -9.205558038030003900 ) ) ; +#40297 = FACE_OUTER_BOUND ( 'NONE', #34743, .T. ) ; +#40298 = ORIENTED_EDGE ( 'NONE', *, *, #3651, .T. ) ; +#40299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40300 = CONICAL_SURFACE ( 'NONE', #70043, 10.00000000000009400, 0.7853981633974447300 ) ; +#40302 = EDGE_CURVE ( 'NONE', #65153, #26822, #1392, .T. ) ; +#40301 = ORIENTED_EDGE ( 'NONE', *, *, #25609, .F. ) ; +#40303 = ADVANCED_FACE ( 'NONE', ( #56392 ), #69057, .T. ) ; +#40304 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#40305 = EDGE_CURVE ( 'NONE', #69830, #27795, #67730, .T. ) ; +#40306 = CIRCLE ( 'NONE', #27691, 10.50000000000009600 ) ; +#40307 = CONICAL_SURFACE ( 'NONE', #18446, 10.00000000000009200, 0.7853981633974447300 ) ; +#40308 = EDGE_LOOP ( 'NONE', ( #50857, #64022, #25759 ) ) ; +#40309 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40310 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40311 = ORIENTED_EDGE ( 'NONE', *, *, #73017, .T. ) ; +#40312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40313 = ORIENTED_EDGE ( 'NONE', *, *, #75140, .T. ) ; +#40314 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868434400, 18.51513784120162500, -28.32821106612160000 ) ) ; +#40315 = EDGE_CURVE ( 'NONE', #15972, #70151, #45678, .T. ) ; +#40316 = ADVANCED_FACE ( 'NONE', ( #37889 ), #19411, .T. ) ; +#40317 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 75.79999999999998300, -28.20555803802997700 ) ) ; +#40319 = CONICAL_SURFACE ( 'NONE', #59693, 10.50000000000009200, 0.7853981633974482800 ) ; +#40318 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 75.67652461702000700, -28.70555803802997700 ) ) ; +#40320 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 90.34267608797603100, -28.20555803802997700 ) ) ; +#40321 = ORIENTED_EDGE ( 'NONE', *, *, #27126, .T. ) ; +#40322 = EDGE_CURVE ( 'NONE', #8567, #27405, #35970, .T. ) ; +#40324 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 21.16666666666667900, 3.794441961969996900 ) ) ; +#40323 = CIRCLE ( 'NONE', #74800, 10.50000000000009600 ) ; +#40325 = EDGE_CURVE ( 'NONE', #70697, #43614, #53256, .T. ) ; +#40326 = VERTEX_POINT ( 'NONE', #60067 ) ; +#40327 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#40328 = ORIENTED_EDGE ( 'NONE', *, *, #15088, .F. ) ; +#40329 = ORIENTED_EDGE ( 'NONE', *, *, #24240, .T. ) ; +#40330 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537515900, 81.39409401757626500, -28.39369363572360100 ) ) ; +#40331 = PLANE ( 'NONE', #79755 ) ; +#40332 = EDGE_LOOP ( 'NONE', ( #17245, #53053, #36450 ) ) ; +#40333 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 70.70627955247211100, -28.45034744217088700 ) ) ; +#40334 = VERTEX_POINT ( 'NONE', #47770 ) ; +#40335 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747186900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#40336 = ADVANCED_FACE ( 'NONE', ( #71003 ), #50518, .F. ) ; +#40337 = CONICAL_SURFACE ( 'NONE', #26737, 10.50000000000009600, 0.7853981633974500600 ) ; +#40338 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40341 = AXIS2_PLACEMENT_3D ( 'NONE', #38509, #50761, #1274 ) ; +#40342 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492612600, 17.57379779496144700, -28.70555803802994200 ) ) ; +#40343 = EDGE_CURVE ( 'NONE', #62677, #59820, #38759, .T. ) ; +#40344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40345 = EDGE_CURVE ( 'NONE', #52976, #23642, #24351, .T. ) ; +#40346 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#40347 = EDGE_CURVE ( 'NONE', #27173, #59224, #9882, .T. ) ; +#40348 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#40349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40350 = ORIENTED_EDGE ( 'NONE', *, *, #33304, .F. ) ; +#40351 = CARTESIAN_POINT ( 'NONE', ( 10.22125914545565300, 39.16476764525110400, -28.30311733712047600 ) ) ; +#40352 = CARTESIAN_POINT ( 'NONE', ( 17.04026895850643400, 41.37561462481247100, -28.30309985153377300 ) ) ; +#40353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40354 = AXIS2_PLACEMENT_3D ( 'NONE', #52060, #27374, #14838 ) ; +#40355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40356 = ORIENTED_EDGE ( 'NONE', *, *, #31954, .T. ) ; +#40357 = CONICAL_SURFACE ( 'NONE', #63281, 10.00000000000009600, 0.7853981633974447300 ) ; +#40358 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#40359 = CARTESIAN_POINT ( 'NONE', ( -4.002028721724246700, 9.810914768184737500, -28.25432823872343500 ) ) ; +#40360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40362 = AXIS2_PLACEMENT_3D ( 'NONE', #18079, #61628, #24342 ) ; +#40363 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#40364 = AXIS2_PLACEMENT_3D ( 'NONE', #72408, #35152, #78663 ) ; +#40365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40366 = AXIS2_PLACEMENT_3D ( 'NONE', #17235, #79529, #42222 ) ; +#40367 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999998900, 69.98922577050318200, -28.37255355648658300 ) ) ; +#40368 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#40369 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20342, #57597, #63877, #26621 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625869030613800E-007, 0.0002930369617396957400 ), + .UNSPECIFIED. ) ; +#40370 = CIRCLE ( 'NONE', #25153, 10.50000000000009600 ) ; +#40371 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007439300, 48.81967837323412600, -28.55467576046958900 ) ) ; +#40372 = EDGE_LOOP ( 'NONE', ( #65907, #23192, #10115, #6612, #1137 ) ) ; +#40373 = FACE_OUTER_BOUND ( 'NONE', #34981, .T. ) ; +#40374 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 64.83333333333335700, 0.9380355014189731800 ) ) ; +#40375 = AXIS2_PLACEMENT_3D ( 'NONE', #52392, #15165, #58676 ) ; +#40376 = EDGE_CURVE ( 'NONE', #77263, #29475, #72973, .T. ) ; +#40377 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29661, #73173, #48367, #11147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964086500, 0.0005839769583123741600 ), + .UNSPECIFIED. ) ; +#40378 = VERTEX_POINT ( 'NONE', #73099 ) ; +#40379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40380 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#40382 = ORIENTED_EDGE ( 'NONE', *, *, #19512, .T. ) ; +#40381 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40384 = CONICAL_SURFACE ( 'NONE', #27635, 10.50000000000009200, 0.7853981633974482800 ) ; +#40385 = CIRCLE ( 'NONE', #66387, 10.00000000000009400 ) ; +#40386 = EDGE_LOOP ( 'NONE', ( #14509, #24786, #60364 ) ) ; +#40387 = EDGE_CURVE ( 'NONE', #12931, #51472, #67116, .T. ) ; +#40388 = CARTESIAN_POINT ( 'NONE', ( 9.198586935028792800, 94.72249899919930300, -28.20555803802997700 ) ) ; +#40389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9139, #33927, #15434, #58941 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671528707000E-007, 0.0007670610367941799900 ), + .UNSPECIFIED. ) ; +#40390 = ORIENTED_EDGE ( 'NONE', *, *, #16867, .F. ) ; +#40391 = VECTOR ( 'NONE', #2982, 1000.000000000000000 ) ; +#40392 = AXIS2_PLACEMENT_3D ( 'NONE', #7979, #51479, #14263 ) ; +#40393 = ORIENTED_EDGE ( 'NONE', *, *, #73330, .F. ) ; +#40394 = ORIENTED_EDGE ( 'NONE', *, *, #63304, .F. ) ; +#40395 = ADVANCED_FACE ( 'NONE', ( #4814 ), #65186, .F. ) ; +#40396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64295, #58010, #64021, #27018 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025105208100, 0.0005411754951809004800 ), + .UNSPECIFIED. ) ; +#40397 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044300, 69.08026449164336200, -28.70555803802997700 ) ) ; +#40398 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#40399 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#40400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40401 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 36.16666666666669300, 1.741883078712356500 ) ) ; +#40402 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 36.22261628933270600, -28.70555803802995200 ) ) ; +#40403 = FACE_OUTER_BOUND ( 'NONE', #3528, .T. ) ; +#40404 = ORIENTED_EDGE ( 'NONE', *, *, #20194, .T. ) ; +#40405 = AXIS2_PLACEMENT_3D ( 'NONE', #49329, #12119, #55609 ) ; +#40406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40407 = FACE_OUTER_BOUND ( 'NONE', #16926, .T. ) ; +#40408 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#40409 = ORIENTED_EDGE ( 'NONE', *, *, #78501, .T. ) ; +#40410 = ADVANCED_FACE ( 'NONE', ( #17478 ), #32067, .F. ) ; +#40411 = ORIENTED_EDGE ( 'NONE', *, *, #45926, .F. ) ; +#40412 = ORIENTED_EDGE ( 'NONE', *, *, #50203, .F. ) ; +#40413 = CARTESIAN_POINT ( 'NONE', ( -16.48490044933404500, 94.35718404202099000, -28.32563125783858700 ) ) ; +#40414 = EDGE_LOOP ( 'NONE', ( #21354, #40490, #43238, #21473 ) ) ; +#40415 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40416 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 67.92318720225497900, -28.70555803802997700 ) ) ; +#40417 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40418 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752687300, 89.51229806853760400, -28.47147304844863300 ) ) ; +#40420 = ADVANCED_FACE ( 'NONE', ( #48575 ), #79759, .F. ) ; +#40419 = VERTEX_POINT ( 'NONE', #48559 ) ; +#40421 = FACE_OUTER_BOUND ( 'NONE', #4509, .T. ) ; +#40422 = ORIENTED_EDGE ( 'NONE', *, *, #42855, .T. ) ; +#40423 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389100, 9.936502946951318200, -28.30782889147480600 ) ) ; +#40424 = AXIS2_PLACEMENT_3D ( 'NONE', #64643, #70860, #58358 ) ; +#40425 = VERTEX_POINT ( 'NONE', #61135 ) ; +#40426 = ADVANCED_FACE ( 'NONE', ( #52481 ), #46617, .T. ) ; +#40427 = CARTESIAN_POINT ( 'NONE', ( 16.27436192410776200, 92.87436192413703400, -28.65146180447623400 ) ) ; +#40428 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40429 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 5.000000000000000000, 16.29444196196997700 ) ) ; +#40430 = VERTEX_POINT ( 'NONE', #73630 ) ; +#40431 = CONICAL_SURFACE ( 'NONE', #59191, 10.00000000000009200, 0.7853981633974447300 ) ; +#40432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40433 = EDGE_CURVE ( 'NONE', #77643, #58100, #76189, .T. ) ; +#40434 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, -1.499999999999974700, -7.061964498581022400 ) ) ; +#40435 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40436 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707771700, 20.66410593583298200, -28.68054222049974200 ) ) ; +#40437 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#40438 = ORIENTED_EDGE ( 'NONE', *, *, #40701, .F. ) ; +#40439 = FACE_OUTER_BOUND ( 'NONE', #27957, .T. ) ; +#40440 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 36.92318720225497900, -28.70555803802995200 ) ) ; +#40441 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344080000, 38.92298334620767300, -28.20555803802995200 ) ) ; +#40442 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841392000, 18.16349705304866200, -28.30782889147480200 ) ) ; +#40443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40444 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#40445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53012, #9503, #59286, #22039 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941454800, 0.001517194977238260300 ), + .UNSPECIFIED. ) ; +#40446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40447 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40448 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40449 = EDGE_CURVE ( 'NONE', #39642, #59395, #61768, .T. ) ; +#40450 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#40451 = CONICAL_SURFACE ( 'NONE', #73065, 10.00000000000009200, 0.7853981633974447300 ) ; +#40452 = ORIENTED_EDGE ( 'NONE', *, *, #40678, .F. ) ; +#40453 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 41.46868088498121800, -28.51286550264513100 ) ) ; +#40454 = EDGE_LOOP ( 'NONE', ( #7390, #74401, #10096, #53968 ) ) ; +#40455 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825387800, 71.43945992495515900, -28.34042301926901400 ) ) ; +#40456 = CONICAL_SURFACE ( 'NONE', #23887, 10.00000000000009200, 0.7853981633974447300 ) ; +#40457 = AXIS2_PLACEMENT_3D ( 'NONE', #4599, #10873, #41854 ) ; +#40458 = EDGE_CURVE ( 'NONE', #74052, #48835, #47239, .T. ) ; +#40459 = EDGE_CURVE ( 'NONE', #53552, #1090, #34016, .T. ) ; +#40461 = VERTEX_POINT ( 'NONE', #11890 ) ; +#40460 = CARTESIAN_POINT ( 'NONE', ( -2.997978530266222300, 18.28907435382948100, -28.25433648786263100 ) ) ; +#40462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40463 = EDGE_CURVE ( 'NONE', #48799, #5753, #15528, .T. ) ; +#40464 = CONICAL_SURFACE ( 'NONE', #19763, 10.50000000000009600, 0.7853981633974482800 ) ; +#40465 = AXIS2_PLACEMENT_3D ( 'NONE', #40875, #65653, #53390 ) ; +#40466 = FACE_OUTER_BOUND ( 'NONE', #49290, .T. ) ; +#40467 = ORIENTED_EDGE ( 'NONE', *, *, #7794, .F. ) ; +#40468 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40469 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40470 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 7.833333333333339300, 9.794441961969999600 ) ) ; +#40471 = CONICAL_SURFACE ( 'NONE', #11965, 10.50000000000009600, 0.7853981633974500600 ) ; +#40472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40473 = ORIENTED_EDGE ( 'NONE', *, *, #43896, .T. ) ; +#40474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40475 = ORIENTED_EDGE ( 'NONE', *, *, #26198, .F. ) ; +#40476 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 42.16666666666667900, -6.205558038030004800 ) ) ; +#40477 = AXIS2_PLACEMENT_3D ( 'NONE', #74832, #25061, #287 ) ; +#40478 = AXIS2_PLACEMENT_3D ( 'NONE', #64618, #70834, #8801 ) ; +#40479 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #952, #69490, #7471, #50964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464040500, 0.001179659862024492800 ), + .UNSPECIFIED. ) ; +#40483 = CONICAL_SURFACE ( 'NONE', #64470, 10.00000000000009200, 0.7853981633974447300 ) ; +#40482 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#40484 = EDGE_CURVE ( 'NONE', #37510, #19874, #32800, .T. ) ; +#40485 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 7.166666666666683800, -9.205558038030003900 ) ) ; +#40486 = FACE_OUTER_BOUND ( 'NONE', #64548, .T. ) ; +#40487 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492444200, 30.39456479767167000, -28.70555803802995200 ) ) ; +#40488 = ORIENTED_EDGE ( 'NONE', *, *, #14025, .T. ) ; +#40489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40490 = ORIENTED_EDGE ( 'NONE', *, *, #21011, .T. ) ; +#40491 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#40492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40493 = ORIENTED_EDGE ( 'NONE', *, *, #55844, .F. ) ; +#40494 = ORIENTED_EDGE ( 'NONE', *, *, #13686, .T. ) ; +#40495 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 44.50000000000000700, 6.847000845227641200 ) ) ; +#40496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49091, #55367, #30656, #74180 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.796294493718590200E-007, 0.0007679767755145087000 ), + .UNSPECIFIED. ) ; +#40497 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466629300, 39.83106028708537800, -28.57333386111660200 ) ) ; +#40498 = ORIENTED_EDGE ( 'NONE', *, *, #38379, .F. ) ; +#40499 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#40500 = CIRCLE ( 'NONE', #12041, 10.00000000000009400 ) ; +#40501 = CIRCLE ( 'NONE', #65061, 10.00000000000009400 ) ; +#40502 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #43727, #6500 ) ; +#40503 = VERTEX_POINT ( 'NONE', #61412 ) ; +#40504 = AXIS2_PLACEMENT_3D ( 'NONE', #39819, #2528, #46048 ) ; +#40505 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782499500, 51.43945992495499600, -28.34042301926905000 ) ) ; +#40506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40507 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428627600, 39.07141756547895300, -28.70555803802995200 ) ) ; +#40508 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.36203212531319200, -28.38801640354855500 ) ) ; +#40509 = CONICAL_SURFACE ( 'NONE', #51283, 10.00000000000009400, 0.7853981633974447300 ) ; +#40510 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 77.94142842854297700, -28.20555803802997700 ) ) ; +#40511 = ORIENTED_EDGE ( 'NONE', *, *, #58099, .T. ) ; +#40512 = CIRCLE ( 'NONE', #68376, 10.00000000000009400 ) ; +#40513 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 38.91070809551056400, -28.20555803802995200 ) ) ; +#40514 = AXIS2_PLACEMENT_3D ( 'NONE', #73912, #49099, #11895 ) ; +#40515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40517 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471864200, 20.46868088498121800, -28.51286550264509900 ) ) ; +#40518 = ADVANCED_FACE ( 'NONE', ( #58364 ), #13595, .T. ) ; +#40519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#40520 = ORIENTED_EDGE ( 'NONE', *, *, #68328, .T. ) ; +#40521 = ADVANCED_FACE ( 'NONE', ( #63223 ), #28203, .T. ) ; +#40522 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286484500, 62.66699492863728000, -28.67024809316606200 ) ) ; +#40523 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40524 = AXIS2_PLACEMENT_3D ( 'NONE', #75090, #37791, #533 ) ; +#40525 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 48.00000000000000700, -1.205558038030005300 ) ) ; +#40526 = FACE_OUTER_BOUND ( 'NONE', #78834, .T. ) ; +#40527 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40528 = ORIENTED_EDGE ( 'NONE', *, *, #60621, .F. ) ; +#40529 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.20037755566824700, -28.53664883431610000 ) ) ; +#40530 = CONICAL_SURFACE ( 'NONE', #75409, 10.50000000000009600, 0.7853981633974500600 ) ; +#40531 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#40532 = ORIENTED_EDGE ( 'NONE', *, *, #31584, .F. ) ; +#40533 = CONICAL_SURFACE ( 'NONE', #11845, 10.00000000000009600, 0.7853981633974447300 ) ; +#40534 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 38.97246552159109700, -28.38801640354855800 ) ) ; +#40535 = AXIS2_PLACEMENT_3D ( 'NONE', #56319, #19064, #62597 ) ; +#40536 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#40537 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#40538 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180791100, 59.94924284854687400, -28.20555803802997700 ) ) ; +#40539 = ORIENTED_EDGE ( 'NONE', *, *, #26914, .T. ) ; +#40540 = ADVANCED_FACE ( 'NONE', ( #2850 ), #75839, .F. ) ; +#40541 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27683, #64959, #40156, #2891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572074165100E-007, 0.0007596410370205239300 ), + .UNSPECIFIED. ) ; +#40542 = CARTESIAN_POINT ( 'NONE', ( -10.77884208558770100, 41.43523632220588100, -28.30315276798567200 ) ) ; +#40543 = FACE_OUTER_BOUND ( 'NONE', #43006, .T. ) ; +#40544 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#40545 = CIRCLE ( 'NONE', #75656, 10.00000000000009400 ) ; +#40546 = ORIENTED_EDGE ( 'NONE', *, *, #18308, .F. ) ; +#40547 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 51.00000000000000700, -9.205558038030005700 ) ) ; +#40548 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180760100, 81.65075715145273700, -28.20555803802997700 ) ) ; +#40549 = ORIENTED_EDGE ( 'NONE', *, *, #9369, .T. ) ; +#40550 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 13.16666666666667700, -3.349151577478988200 ) ) ; +#40551 = EDGE_LOOP ( 'NONE', ( #24724, #15275, #10156 ) ) ; +#40552 = CARTESIAN_POINT ( 'NONE', ( 20.15290796999663000, 94.17645397963268300, -27.27571340763702100 ) ) ; +#40553 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301200, 66.79999999999964200, -28.70555803802997700 ) ) ; +#40554 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823701300, 31.90456253568396500, -28.61277292027075700 ) ) ; +#40555 = CONICAL_SURFACE ( 'NONE', #31923, 10.50000000000009400, 0.7853981633974500600 ) ; +#40556 = VERTEX_POINT ( 'NONE', #18668 ) ; +#40557 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40558 = EDGE_LOOP ( 'NONE', ( #73151, #73765, #12267, #12203, #3233 ) ) ; +#40559 = ORIENTED_EDGE ( 'NONE', *, *, #6756, .F. ) ; +#40560 = ORIENTED_EDGE ( 'NONE', *, *, #3502, .T. ) ; +#40561 = EDGE_CURVE ( 'NONE', #69496, #7149, #18358, .T. ) ; +#40562 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6935, #13228, #44421, #7185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466043697382400E-007, 0.0002929914227444504400 ), + .UNSPECIFIED. ) ; +#40563 = ORIENTED_EDGE ( 'NONE', *, *, #67869, .T. ) ; +#40564 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#40565 = FACE_OUTER_BOUND ( 'NONE', #32764, .T. ) ; +#40566 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 16.50000000000000700, 2.454695999814385600 ) ) ; +#40567 = ORIENTED_EDGE ( 'NONE', *, *, #24283, .T. ) ; +#40568 = EDGE_CURVE ( 'NONE', #15606, #20370, #3878, .T. ) ; +#40569 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670950100, 10.65863441772062700, -28.48677465922827800 ) ) ; +#40570 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223655200, 51.76592160028369000, -28.37510699173786900 ) ) ; +#40571 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 56.66666666666667900, 5.722645192245505700 ) ) ; +#40572 = EDGE_CURVE ( 'NONE', #57903, #51437, #30154, .T. ) ; +#40573 = EDGE_LOOP ( 'NONE', ( #28843, #71504, #47333, #9075, #32741 ) ) ; +#40574 = CONICAL_SURFACE ( 'NONE', #43455, 10.50000000000009600, 0.7853981633974500600 ) ; +#40575 = AXIS2_PLACEMENT_3D ( 'NONE', #27995, #15719, #77719 ) ; +#40576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40577 = ORIENTED_EDGE ( 'NONE', *, *, #38068, .F. ) ; +#40578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40579 = FACE_OUTER_BOUND ( 'NONE', #21346, .T. ) ; +#40580 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26271, #32486, #51203, #14002 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850203900, 0.0007596411030283606100 ), + .UNSPECIFIED. ) ; +#40581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40582 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 61.52858243452105600, -28.70555803802997700 ) ) ; +#40584 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40583 = FACE_OUTER_BOUND ( 'NONE', #32990, .T. ) ; +#40585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40586 = AXIS2_PLACEMENT_3D ( 'NONE', #13195, #44127, #68922 ) ; +#40588 = ORIENTED_EDGE ( 'NONE', *, *, #32934, .T. ) ; +#40587 = EDGE_CURVE ( 'NONE', #30072, #56108, #70194, .T. ) ; +#40589 = EDGE_CURVE ( 'NONE', #55770, #29021, #55735, .T. ) ; +#40590 = ADVANCED_FACE ( 'NONE', ( #77799 ), #26235, .F. ) ; +#40591 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#40593 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#40592 = AXIS2_PLACEMENT_3D ( 'NONE', #49669, #55955, #6197 ) ; +#40594 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911113400, 60.40166528437795500, -28.28704243186590300 ) ) ; +#40595 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#40596 = FACE_OUTER_BOUND ( 'NONE', #33454, .T. ) ; +#40597 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40598 = ORIENTED_EDGE ( 'NONE', *, *, #41642, .F. ) ; +#40599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#40600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40601 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40602 = AXIS2_PLACEMENT_3D ( 'NONE', #35316, #78824, #41531 ) ; +#40603 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#40604 = ORIENTED_EDGE ( 'NONE', *, *, #12895, .F. ) ; +#40605 = EDGE_CURVE ( 'NONE', #61916, #898, #41282, .T. ) ; +#40606 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#40608 = ORIENTED_EDGE ( 'NONE', *, *, #42594, .T. ) ; +#40607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40609 = ADVANCED_FACE ( 'NONE', ( #61286 ), #73922, .T. ) ; +#40610 = CONICAL_SURFACE ( 'NONE', #76399, 10.50000000000009600, 0.7853981633974500600 ) ; +#40611 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40612 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#40613 = AXIS2_PLACEMENT_3D ( 'NONE', #33957, #52698, #71213 ) ; +#40614 = CARTESIAN_POINT ( 'NONE', ( -3.703847664712689300E-014, 77.46443389862713500, -28.54207364681949200 ) ) ; +#40615 = AXIS2_PLACEMENT_3D ( 'NONE', #12912, #56390, #19139 ) ; +#40616 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 21.97376207875058900, -28.70555803802995200 ) ) ; +#40617 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.67143691309408700, -28.36981695106777200 ) ) ; +#40618 = ORIENTED_EDGE ( 'NONE', *, *, #72179, .F. ) ; +#40619 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736714400, 35.05000000000001100, -28.70555803802995200 ) ) ; +#40620 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65411, #21868, #59675, #22403 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648283228334400E-007, 0.0004318378175228910900 ), + .UNSPECIFIED. ) ; +#40621 = CARTESIAN_POINT ( 'NONE', ( 16.68942240455970000, 64.52391587796454100, -28.56336785413098400 ) ) ; +#40622 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153706400, 50.79999999999999000, -28.55171188418377400 ) ) ; +#40623 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654552600, 71.32559822014179900, -28.29986836858019600 ) ) ; +#40624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40626 = CIRCLE ( 'NONE', #10958, 10.00000000000009200 ) ; +#40627 = ORIENTED_EDGE ( 'NONE', *, *, #55211, .F. ) ; +#40628 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754800, 19.89456479767150300, -28.70555803802994200 ) ) ; +#40629 = AXIS2_PLACEMENT_3D ( 'NONE', #54969, #61537, #36462 ) ; +#40630 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510334500, 9.940690926013795400, -28.35186440610855000 ) ) ; +#40631 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385100800, 31.10677350908850500, -28.30799595738892500 ) ) ; +#40632 = ORIENTED_EDGE ( 'NONE', *, *, #61957, .T. ) ; +#40633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40634 = CARTESIAN_POINT ( 'NONE', ( 17.03178561562191700, 61.31767869357311400, -28.25052235028461600 ) ) ; +#40635 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 69.97246552159113300, -28.38801640354855100 ) ) ; +#40636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40637 = ADVANCED_FACE ( 'NONE', ( #11633 ), #40797, .T. ) ; +#40638 = CIRCLE ( 'NONE', #19777, 10.00000000000009200 ) ; +#40639 = CIRCLE ( 'NONE', #24073, 9.500000000000097700 ) ; +#40640 = AXIS2_PLACEMENT_3D ( 'NONE', #27388, #70877, #33619 ) ; +#40641 = ORIENTED_EDGE ( 'NONE', *, *, #17131, .T. ) ; +#40642 = ORIENTED_EDGE ( 'NONE', *, *, #72699, .T. ) ; +#40643 = ORIENTED_EDGE ( 'NONE', *, *, #21407, .T. ) ; +#40644 = ORIENTED_EDGE ( 'NONE', *, *, #72174, .T. ) ; +#40645 = ORIENTED_EDGE ( 'NONE', *, *, #66908, .T. ) ; +#40646 = ORIENTED_EDGE ( 'NONE', *, *, #25233, .T. ) ; +#40647 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298134700, 75.79999999999965600, -28.70555803803030800 ) ) ; +#40648 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 62.66666666666667900, -5.205558038030003100 ) ) ; +#40649 = AXIS2_PLACEMENT_3D ( 'NONE', #54100, #16858, #60394 ) ; +#40650 = VERTEX_POINT ( 'NONE', #69242 ) ; +#40651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#40653 = EDGE_CURVE ( 'NONE', #79184, #39588, #59306, .T. ) ; +#40654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40655 = CIRCLE ( 'NONE', #67871, 10.00000000000009200 ) ; +#40656 = AXIS2_PLACEMENT_3D ( 'NONE', #48447, #11233, #54723 ) ; +#40657 = ORIENTED_EDGE ( 'NONE', *, *, #3762, .T. ) ; +#40658 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40659 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000010700, 56.83333333333335000, 0.9380355014189739600 ) ) ; +#40660 = ORIENTED_EDGE ( 'NONE', *, *, #44581, .F. ) ; +#40661 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63190, #75417, #6594, #25929 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0007303759720927721800 ), + .UNSPECIFIED. ) ; +#40662 = CONICAL_SURFACE ( 'NONE', #54237, 10.50000000000009600, 0.7853981633974482800 ) ; +#40663 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.43250300240228500, -28.20555803802997700 ) ) ; +#40665 = EDGE_LOOP ( 'NONE', ( #67420, #40969, #26417 ) ) ; +#40664 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507686300, 17.57379779496231400, -28.70555803803009500 ) ) ; +#40666 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 15.94142842854265000, -28.20555803803025800 ) ) ; +#40667 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#40668 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 34.00000000000001400, -1.205558038030002800 ) ) ; +#40669 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 80.51916201875670300, -28.45106778992437700 ) ) ; +#40670 = EDGE_CURVE ( 'NONE', #14649, #2388, #26835, .T. ) ; +#40671 = FACE_OUTER_BOUND ( 'NONE', #24446, .T. ) ; +#40672 = ORIENTED_EDGE ( 'NONE', *, *, #18798, .T. ) ; +#40673 = EDGE_CURVE ( 'NONE', #29021, #9168, #12384, .T. ) ; +#40674 = EDGE_LOOP ( 'NONE', ( #24457, #55707, #34011 ) ) ; +#40675 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000421000, 78.39962244433169800, -28.53664883431635200 ) ) ; +#40676 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489086800, 18.47143078992693400, -28.37063977681179200 ) ) ; +#40677 = CONICAL_SURFACE ( 'NONE', #12811, 10.00000000000009200, 0.7853981633974415100 ) ; +#40678 = EDGE_CURVE ( 'NONE', #74194, #45917, #57349, .T. ) ; +#40679 = ADVANCED_FACE ( 'NONE', ( #9662 ), #69492, .T. ) ; +#40680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40681 = EDGE_CURVE ( 'NONE', #74506, #77640, #78710, .T. ) ; +#40682 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#40683 = AXIS2_PLACEMENT_3D ( 'NONE', #60167, #22892, #66413 ) ; +#40684 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701800, 23.61903418172678900, -28.69431509262337700 ) ) ; +#40685 = FACE_OUTER_BOUND ( 'NONE', #32973, .T. ) ; +#40686 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, -3.666666666666665200, 2.794441961969998300 ) ) ; +#40687 = ORIENTED_EDGE ( 'NONE', *, *, #72961, .T. ) ; +#40688 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754300, 39.70543520232828200, -28.70555803802995200 ) ) ; +#40689 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#40690 = ORIENTED_EDGE ( 'NONE', *, *, #4847, .F. ) ; +#40691 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#40692 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#40693 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#40694 = VERTEX_POINT ( 'NONE', #32506 ) ; +#40695 = ADVANCED_FACE ( 'NONE', ( #44642 ), #38825, .T. ) ; +#40696 = CARTESIAN_POINT ( 'NONE', ( 16.52197549498847800, 39.12306210240190300, -28.54786661478398500 ) ) ; +#40697 = CARTESIAN_POINT ( 'NONE', ( 3.031785615621766600, 61.31767869357339200, -28.25052235028430300 ) ) ; +#40698 = AXIS2_PLACEMENT_3D ( 'NONE', #49244, #12032, #61817 ) ; +#40699 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 41.78933626866496800, -28.53923937255172700 ) ) ; +#40700 = EDGE_CURVE ( 'NONE', #39046, #70379, #64260, .T. ) ; +#40701 = EDGE_CURVE ( 'NONE', #32539, #67366, #899, .T. ) ; +#40702 = EDGE_CURVE ( 'NONE', #8048, #10425, #49718, .T. ) ; +#40703 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2925, #15462, #40460, #3194 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852012000, 0.0009376791149930214700 ), + .UNSPECIFIED. ) ; +#40704 = CIRCLE ( 'NONE', #45660, 10.50000000000009600 ) ; +#40705 = CYLINDRICAL_SURFACE ( 'NONE', #16204, 10.00000000000000200 ) ; +#40706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40707 = ORIENTED_EDGE ( 'NONE', *, *, #22828, .T. ) ; +#40708 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651185800, 51.99560977511661300, -28.70555803802997700 ) ) ; +#40709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40710 = ORIENTED_EDGE ( 'NONE', *, *, #69891, .F. ) ; +#40711 = AXIS2_PLACEMENT_3D ( 'NONE', #20201, #63736, #26478 ) ; +#40712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40713 = EDGE_LOOP ( 'NONE', ( #7311, #15221, #41186, #48246 ) ) ; +#40714 = ADVANCED_FACE ( 'NONE', ( #55386 ), #69969, .F. ) ; +#40715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49792, #68614, #6582, #50061 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849964300, 0.0007596411030280981200 ), + .UNSPECIFIED. ) ; +#40716 = CIRCLE ( 'NONE', #8996, 10.00000000000009600 ) ; +#40717 = ORIENTED_EDGE ( 'NONE', *, *, #27740, .T. ) ; +#40718 = VERTEX_POINT ( 'NONE', #39279 ) ; +#40719 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851719400, 15.00238095238093400, -28.70555803803025800 ) ) ; +#40720 = ORIENTED_EDGE ( 'NONE', *, *, #77510, .F. ) ; +#40721 = ORIENTED_EDGE ( 'NONE', *, *, #35247, .T. ) ; +#40722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40723 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .T. ) ; +#40724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55298, #11820, #74111, #36801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560432900, 0.003631405919786738400 ), + .UNSPECIFIED. ) ; +#40725 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#40726 = EDGE_CURVE ( 'NONE', #71000, #30212, #35336, .T. ) ; +#40727 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40728 = AXIS2_PLACEMENT_3D ( 'NONE', #33058, #76569, #39302 ) ; +#40729 = AXIS2_PLACEMENT_3D ( 'NONE', #2113, #26905, #39375 ) ; +#40730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40731 = ORIENTED_EDGE ( 'NONE', *, *, #20085, .F. ) ; +#40732 = CARTESIAN_POINT ( 'NONE', ( 5.148153789003704800, 85.79999999999967000, -28.37148172714603000 ) ) ; +#40733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40734 = ADVANCED_FACE ( 'NONE', ( #71968 ), #36882, .T. ) ; +#40735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10434, #47655, #60222, #22939 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823692534337300E-007, 0.0008724363063894256400 ), + .UNSPECIFIED. ) ; +#40736 = FACE_OUTER_BOUND ( 'NONE', #37961, .T. ) ; +#40738 = ORIENTED_EDGE ( 'NONE', *, *, #58821, .T. ) ; +#40737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40739 = CARTESIAN_POINT ( 'NONE', ( 9.497924978448521600, 90.99854748491378600, -28.70555803802997700 ) ) ; +#40740 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 75.92347538298001600, -28.70555803802997700 ) ) ; +#40741 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 5.666666666666683800, -10.73183747965883100 ) ) ; +#40742 = VERTEX_POINT ( 'NONE', #70570 ) ; +#40743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40744 = CONICAL_SURFACE ( 'NONE', #13051, 10.00000000000009600, 0.7853981633974482800 ) ; +#40745 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 40.00000000000000000, 3.794441961969998300 ) ) ; +#40746 = AXIS2_PLACEMENT_3D ( 'NONE', #937, #63265, #26001 ) ; +#40747 = ORIENTED_EDGE ( 'NONE', *, *, #3250, .T. ) ; +#40748 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#40749 = VERTEX_POINT ( 'NONE', #76825 ) ; +#40750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40751 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 5.000000000000004400, 6.794441961969995200 ) ) ; +#40752 = AXIS2_PLACEMENT_3D ( 'NONE', #62525, #25265, #68774 ) ; +#40753 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40755 = CONICAL_SURFACE ( 'NONE', #10881, 10.50000000000009400, 0.7853981633974500600 ) ; +#40756 = ORIENTED_EDGE ( 'NONE', *, *, #52453, .T. ) ; +#40757 = CARTESIAN_POINT ( 'NONE', ( 6.609746638425665600, 44.44999999999999600, 4.252518877878362200 ) ) ; +#40758 = EDGE_CURVE ( 'NONE', #33376, #29698, #20848, .T. ) ; +#40759 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 42.33333333333334300, -10.73183747965883100 ) ) ; +#40760 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40761 = AXIS2_PLACEMENT_3D ( 'NONE', #45272, #8035, #51536 ) ; +#40762 = ORIENTED_EDGE ( 'NONE', *, *, #79654, .F. ) ; +#40763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75097, #31581, #538, #44036 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251678000, 0.003631405919786722400 ), + .UNSPECIFIED. ) ; +#40764 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042462600, 38.00972971738994500, -28.70555803802996000 ) ) ; +#40765 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.62753447840929500, -28.38801640354893500 ) ) ; +#40766 = AXIS2_PLACEMENT_3D ( 'NONE', #66192, #28962, #72452 ) ; +#40767 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6285, #49769, #12556, #56050 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917667860700E-007, 0.0004089036991175619200 ), + .UNSPECIFIED. ) ; +#40768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40769 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#40770 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 20.44069092601379400, -28.35186440610856100 ) ) ; +#40771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40772 = AXIS2_PLACEMENT_3D ( 'NONE', #28888, #72375, #35115 ) ; +#40773 = CIRCLE ( 'NONE', #30168, 10.50000000000009600 ) ; +#40774 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472516600, 14.04999999999928800, -28.20555803803042500 ) ) ; +#40775 = FACE_OUTER_BOUND ( 'NONE', #60456, .T. ) ; +#40776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40777 = ORIENTED_EDGE ( 'NONE', *, *, #27697, .T. ) ; +#40779 = ORIENTED_EDGE ( 'NONE', *, *, #71074, .F. ) ; +#40778 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880587100, 44.92896305882240400, -28.53160243214819800 ) ) ; +#40780 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467680500, 30.26893971292316000, -28.57333386111099600 ) ) ; +#40781 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182800, 49.63131911501876200, -28.51286550264510900 ) ) ; +#40782 = ORIENTED_EDGE ( 'NONE', *, *, #71976, .F. ) ; +#40783 = FACE_OUTER_BOUND ( 'NONE', #35434, .T. ) ; +#40784 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465442200, 40.60079448659599400, -28.70555803802996700 ) ) ; +#40785 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#40786 = EDGE_LOOP ( 'NONE', ( #36016, #24045, #2858, #4979 ) ) ; +#40787 = CARTESIAN_POINT ( 'NONE', ( -4.036255108181025600, 89.94924284854707300, -28.20555803802997700 ) ) ; +#40788 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40789 = CONICAL_SURFACE ( 'NONE', #59948, 10.00000000000009400, 0.7853981633974447300 ) ; +#40790 = ORIENTED_EDGE ( 'NONE', *, *, #25507, .F. ) ; +#40791 = VERTEX_POINT ( 'NONE', #33310 ) ; +#40792 = EDGE_CURVE ( 'NONE', #34010, #72825, #6374, .T. ) ; +#40793 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 45.83333333333335000, 0.9380355014189731800 ) ) ; +#40794 = CARTESIAN_POINT ( 'NONE', ( 10.62849472960812800, 71.43250300240195800, -28.25053119339314400 ) ) ; +#40795 = ORIENTED_EDGE ( 'NONE', *, *, #54514, .F. ) ; +#40796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40797 = CONICAL_SURFACE ( 'NONE', #77770, 10.00000000000009200, 0.7853981633974447300 ) ; +#40798 = EDGE_CURVE ( 'NONE', #50924, #41614, #72719, .T. ) ; +#40799 = VERTEX_POINT ( 'NONE', #14816 ) ; +#40800 = EDGE_LOOP ( 'NONE', ( #70228, #80234, #73975, #55381 ) ) ; +#40802 = VERTEX_POINT ( 'NONE', #46059 ) ; +#40801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#40803 = ORIENTED_EDGE ( 'NONE', *, *, #27756, .F. ) ; +#40804 = VERTEX_POINT ( 'NONE', #52304 ) ; +#40805 = ADVANCED_FACE ( 'NONE', ( #53443 ), #7677, .T. ) ; +#40806 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40807 = VERTEX_POINT ( 'NONE', #64892 ) ; +#40808 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#40809 = EDGE_CURVE ( 'NONE', #64905, #57731, #24264, .T. ) ; +#40810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40811 = VERTEX_POINT ( 'NONE', #33854 ) ; +#40812 = CONICAL_SURFACE ( 'NONE', #70355, 10.00000000000009200, 0.7853981633974415100 ) ; +#40813 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344754100, 10.17701665379211600, -28.20555803803009800 ) ) ; +#40814 = EDGE_CURVE ( 'NONE', #72305, #25861, #5762, .T. ) ; +#40815 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448994900, 53.16666666666667900, 6.794441961969994300 ) ) ; +#40817 = EDGE_CURVE ( 'NONE', #29510, #35712, #42737, .T. ) ; +#40816 = ORIENTED_EDGE ( 'NONE', *, *, #75262, .F. ) ; +#40818 = VERTEX_POINT ( 'NONE', #52591 ) ; +#40819 = ADVANCED_FACE ( 'NONE', ( #22316 ), #15364, .T. ) ; +#40820 = VERTEX_POINT ( 'NONE', #59128 ) ; +#40821 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507453100, 21.02620220503759200, -28.70555803802998100 ) ) ; +#40822 = EDGE_LOOP ( 'NONE', ( #3266, #50705, #62124, #67322 ) ) ; +#40823 = ORIENTED_EDGE ( 'NONE', *, *, #70855, .T. ) ; +#40824 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432841900, 39.35339758437810100, -28.20555803802995200 ) ) ; +#40825 = ADVANCED_FACE ( 'NONE', ( #3799 ), #66119, .F. ) ; +#40826 = CONICAL_SURFACE ( 'NONE', #5169, 10.50000000000009800, 0.7853981633974518300 ) ; +#40827 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40828 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 11.00000000000001100, -1.205558038030005300 ) ) ; +#40829 = CARTESIAN_POINT ( 'NONE', ( 23.48798283389625400, 95.84373220801562400, -24.02475535962351600 ) ) ; +#40830 = AXIS2_PLACEMENT_3D ( 'NONE', #78980, #28975, #29247 ) ; +#40831 = VERTEX_POINT ( 'NONE', #71663 ) ; +#40832 = EDGE_CURVE ( 'NONE', #67505, #5527, #1829, .T. ) ; +#40833 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 17.97246552159106500, -28.38801640354855800 ) ) ; +#40834 = EDGE_CURVE ( 'NONE', #78782, #67833, #58228, .T. ) ; +#40835 = EDGE_CURVE ( 'NONE', #58896, #5185, #43739, .T. ) ; +#40836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40837 = ORIENTED_EDGE ( 'NONE', *, *, #67185, .T. ) ; +#40838 = ADVANCED_FACE ( 'NONE', ( #51445 ), #16464, .F. ) ; +#40839 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35808, #73087, #48283, #11063 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003690754108544719800, 0.001145887823880333000 ), + .UNSPECIFIED. ) ; +#40840 = AXIS2_PLACEMENT_3D ( 'NONE', #51493, #14282, #45240 ) ; +#40841 = FACE_OUTER_BOUND ( 'NONE', #1079, .T. ) ; +#40843 = ORIENTED_EDGE ( 'NONE', *, *, #50733, .F. ) ; +#40842 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40844 = ORIENTED_EDGE ( 'NONE', *, *, #76926, .F. ) ; +#40845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40846 = AXIS2_PLACEMENT_3D ( 'NONE', #5189, #48683, #11467 ) ; +#40847 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 14.33333333333334300, -3.705558038030004400 ) ) ; +#40848 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40849 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51969, #8470, #70778, #33516 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648281868022800E-007, 0.0004318378175225345500 ), + .UNSPECIFIED. ) ; +#40850 = AXIS2_PLACEMENT_3D ( 'NONE', #20114, #63647, #26382 ) ; +#40851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40852 = CARTESIAN_POINT ( 'NONE', ( 1.466819876342328800, 65.79999999999998300, -28.37307693585060900 ) ) ; +#40853 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 54.49999999999998600, -7.061964498581022400 ) ) ; +#40854 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#40855 = CIRCLE ( 'NONE', #34801, 10.00000000000009200 ) ; +#40856 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40857 = FACE_OUTER_BOUND ( 'NONE', #40274, .T. ) ; +#40858 = ORIENTED_EDGE ( 'NONE', *, *, #9851, .T. ) ; +#40859 = CARTESIAN_POINT ( 'NONE', ( -17.41542217839998900, 90.41624506589143100, -28.40985430318291100 ) ) ; +#40860 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#40861 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280448000, 77.94142842854286400, -28.37229765499331800 ) ) ; +#40862 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#40863 = AXIS2_PLACEMENT_3D ( 'NONE', #11232, #61007, #5230 ) ; +#40864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40865 = ORIENTED_EDGE ( 'NONE', *, *, #28684, .T. ) ; +#40866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76281, #14019, #57540, #39007 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137488667000 ), + .UNSPECIFIED. ) ; +#40867 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#40868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40869 = FACE_OUTER_BOUND ( 'NONE', #79551, .T. ) ; +#40870 = ORIENTED_EDGE ( 'NONE', *, *, #22137, .F. ) ; +#40871 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40872 = CIRCLE ( 'NONE', #52025, 10.00000000000009600 ) ; +#40873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40874 = VERTEX_POINT ( 'NONE', #53419 ) ; +#40875 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#40876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40878 = EDGE_CURVE ( 'NONE', #73209, #5287, #29366, .T. ) ; +#40877 = ORIENTED_EDGE ( 'NONE', *, *, #22135, .T. ) ; +#40879 = CIRCLE ( 'NONE', #55838, 10.50000000000009600 ) ; +#40880 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 51.46283204837325800, -28.48697406221693400 ) ) ; +#40881 = ORIENTED_EDGE ( 'NONE', *, *, #27056, .F. ) ; +#40882 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40883 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#40884 = AXIS2_PLACEMENT_3D ( 'NONE', #79422, #42130, #4879 ) ; +#40885 = ORIENTED_EDGE ( 'NONE', *, *, #31680, .F. ) ; +#40886 = EDGE_LOOP ( 'NONE', ( #80702, #57873, #29256, #77500, #49055 ) ) ; +#40887 = ORIENTED_EDGE ( 'NONE', *, *, #58293, .F. ) ; +#40888 = EDGE_LOOP ( 'NONE', ( #71806, #59296, #21050 ) ) ; +#40889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40890 = VERTEX_POINT ( 'NONE', #34946 ) ; +#40891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40892 = CARTESIAN_POINT ( 'NONE', ( -16.56790757632389700, 46.72927195446096200, -28.58363361004981600 ) ) ; +#40893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40894 = CARTESIAN_POINT ( 'NONE', ( 9.487278546916590100, 61.47860033657553900, -28.56001054660934100 ) ) ; +#40895 = CARTESIAN_POINT ( 'NONE', ( -18.01245226984190900, 81.29377709843113600, -28.24172864879667300 ) ) ; +#40896 = PLANE ( 'NONE', #1417 ) ; +#40897 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344057800, 17.92298334620733500, -28.20555803802993500 ) ) ; +#40898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40899 = CARTESIAN_POINT ( 'NONE', ( -24.52461995806169500, 98.75207410021033600, -21.78534307049719500 ) ) ; +#40900 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100900, 40.55558404029871900, -28.45034744217088700 ) ) ; +#40901 = FACE_OUTER_BOUND ( 'NONE', #31070, .T. ) ; +#40902 = AXIS2_PLACEMENT_3D ( 'NONE', #61087, #48785, #5028 ) ; +#40903 = ORIENTED_EDGE ( 'NONE', *, *, #10260, .T. ) ; +#40904 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844081900, 71.29362734601328100, -28.24165217761328300 ) ) ; +#40905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40906 = ORIENTED_EDGE ( 'NONE', *, *, #42586, .T. ) ; +#40907 = EDGE_LOOP ( 'NONE', ( #8631, #70863, #75553 ) ) ; +#40908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40909 = ORIENTED_EDGE ( 'NONE', *, *, #71458, .F. ) ; +#40910 = ORIENTED_EDGE ( 'NONE', *, *, #3171, .F. ) ; +#40911 = ORIENTED_EDGE ( 'NONE', *, *, #4808, .F. ) ; +#40912 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703200, 25.48096581827319100, -28.69431509262337300 ) ) ; +#40913 = FACE_OUTER_BOUND ( 'NONE', #47143, .T. ) ; +#40914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40916 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 60.34267608797601700, -28.20555803802997700 ) ) ; +#40917 = ORIENTED_EDGE ( 'NONE', *, *, #23520, .T. ) ; +#40918 = AXIS2_PLACEMENT_3D ( 'NONE', #54698, #17449, #60980 ) ; +#40919 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40920 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784445100, 55.79999999999974800, -28.20555803803014400 ) ) ; +#40921 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75297, #749, #44235, #7016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850230400, 0.0007596411030283590900 ), + .UNSPECIFIED. ) ; +#40922 = EDGE_CURVE ( 'NONE', #20052, #24220, #14848, .T. ) ; +#40923 = FACE_OUTER_BOUND ( 'NONE', #67411, .T. ) ; +#40924 = ORIENTED_EDGE ( 'NONE', *, *, #41167, .F. ) ; +#40925 = EDGE_LOOP ( 'NONE', ( #17879, #1921, #80708, #4617 ) ) ; +#40926 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#40927 = ADVANCED_FACE ( 'NONE', ( #32992 ), #64174, .T. ) ; +#40928 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 60.50000000000001400, 4.650848422521012700 ) ) ; +#40929 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#40930 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#40931 = CARTESIAN_POINT ( 'NONE', ( -9.553492182972576100, 89.37488905616160700, -28.55192314908416100 ) ) ; +#40932 = ADVANCED_FACE ( 'NONE', ( #49500 ), #31061, .T. ) ; +#40934 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12096, #5842, #80097, #18347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141652819800 ), + .UNSPECIFIED. ) ; +#40933 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#40935 = EDGE_CURVE ( 'NONE', #17250, #79232, #47563, .T. ) ; +#40937 = EDGE_CURVE ( 'NONE', #66290, #44515, #373, .T. ) ; +#40936 = CIRCLE ( 'NONE', #76578, 10.00000000000009400 ) ; +#40938 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275506100, 54.66666666666670700, -5.205558038030008400 ) ) ; +#40939 = VERTEX_POINT ( 'NONE', #35223 ) ; +#40940 = ORIENTED_EDGE ( 'NONE', *, *, #10567, .F. ) ; +#40941 = EDGE_LOOP ( 'NONE', ( #5906, #19271, #44088, #37715 ) ) ; +#40942 = AXIS2_PLACEMENT_3D ( 'NONE', #64868, #27597, #71089 ) ; +#40943 = EDGE_CURVE ( 'NONE', #57293, #80780, #68047, .T. ) ; +#40944 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80308, #43023, #18293, #61832 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354285709600E-007, 0.0007670609591624643700 ), + .UNSPECIFIED. ) ; +#40945 = EDGE_CURVE ( 'NONE', #57451, #53788, #18411, .T. ) ; +#40946 = EDGE_CURVE ( 'NONE', #9324, #33173, #66724, .T. ) ; +#40947 = ADVANCED_FACE ( 'NONE', ( #34973 ), #29159, .T. ) ; +#40948 = PLANE ( 'NONE', #38641 ) ; +#40949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#40950 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655604300, 20.67701665379236100, -28.20555803802994500 ) ) ; +#40951 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 31.83333333333333600, -4.152999154772353500 ) ) ; +#40952 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40953 = CIRCLE ( 'NONE', #22134, 9.500000000000097700 ) ; +#40955 = ORIENTED_EDGE ( 'NONE', *, *, #41574, .T. ) ; +#40954 = EDGE_CURVE ( 'NONE', #9664, #10041, #52209, .T. ) ; +#40956 = EDGE_LOOP ( 'NONE', ( #31485, #79018, #71886, #45894 ) ) ; +#40957 = AXIS2_PLACEMENT_3D ( 'NONE', #68775, #62526, #228 ) ; +#40958 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807170800, 64.79999999999999700, -28.70555803802997700 ) ) ; +#40959 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344310900, 38.92298334620755900, -28.20555803802996000 ) ) ; +#40960 = FACE_OUTER_BOUND ( 'NONE', #29602, .T. ) ; +#40961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45269, #8034, #64114, #26832 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674960996100E-007, 0.0003940053330073650700 ), + .UNSPECIFIED. ) ; +#40962 = VERTEX_POINT ( 'NONE', #79256 ) ; +#40963 = CARTESIAN_POINT ( 'NONE', ( 17.90233405034982500, 51.36492161058528400, -28.27580420063998500 ) ) ; +#40964 = ORIENTED_EDGE ( 'NONE', *, *, #74206, .F. ) ; +#40965 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339032400, 81.46283204837304500, -28.48697406221690500 ) ) ; +#40966 = ORIENTED_EDGE ( 'NONE', *, *, #36166, .F. ) ; +#40967 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 72.97376207875058200, -28.70555803802997700 ) ) ; +#40968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40969 = ORIENTED_EDGE ( 'NONE', *, *, #7454, .T. ) ; +#40970 = CARTESIAN_POINT ( 'NONE', ( -17.40084336938112500, 71.69277301236455500, -28.41361853548543300 ) ) ; +#40971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74063, #30296, #18021, #36769 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459159610706500E-007, 0.0007679767755145098900 ), + .UNSPECIFIED. ) ; +#40972 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 23.37738371066728500, -28.70555803802995200 ) ) ; +#40973 = ORIENTED_EDGE ( 'NONE', *, *, #36796, .T. ) ; +#40974 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40975 = LINE ( 'NONE', #76919, #7856 ) ; +#40976 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 61.43945992495532900, -28.34042301926881200 ) ) ; +#40977 = ORIENTED_EDGE ( 'NONE', *, *, #20113, .T. ) ; +#40978 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 66.33333333333334300, -3.705558038030004400 ) ) ; +#40979 = ORIENTED_EDGE ( 'NONE', *, *, #47708, .F. ) ; +#40980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40981 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145308500, 71.86801718796490900, -28.34169759783703300 ) ) ; +#40982 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .F. ) ; +#40983 = VERTEX_POINT ( 'NONE', #67007 ) ; +#40984 = ORIENTED_EDGE ( 'NONE', *, *, #57284, .T. ) ; +#40985 = VERTEX_POINT ( 'NONE', #54487 ) ; +#40986 = EDGE_LOOP ( 'NONE', ( #17662, #71123, #42584, #72493, #23559 ) ) ; +#40987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40988 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477733700, 61.21410430764721200, -28.27354076558355800 ) ) ; +#40989 = CONICAL_SURFACE ( 'NONE', #73302, 10.00000000000009600, 0.7853981633974447300 ) ; +#40990 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344343800, 41.67701665379242100, -28.20555803802997400 ) ) ; +#40991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40992 = AXIS2_PLACEMENT_3D ( 'NONE', #41595, #4333, #47831 ) ; +#40993 = ORIENTED_EDGE ( 'NONE', *, *, #32951, .F. ) ; +#40994 = EDGE_CURVE ( 'NONE', #49811, #47573, #37763, .T. ) ; +#40995 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40996 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#40997 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.31066373133501200, -28.53923937255171600 ) ) ; +#40998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41000 = CARTESIAN_POINT ( 'NONE', ( -17.22115791441228400, 20.43523632220587800, -28.30315276798564700 ) ) ; +#41001 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#41002 = CONICAL_SURFACE ( 'NONE', #76388, 10.00000000000009400, 0.7853981633974447300 ) ; +#41003 = ORIENTED_EDGE ( 'NONE', *, *, #28862, .T. ) ; +#41004 = EDGE_CURVE ( 'NONE', #79978, #15109, #23334, .T. ) ; +#41005 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510926000, 49.97143078992715500, -28.37063977681169300 ) ) ; +#41006 = AXIS2_PLACEMENT_3D ( 'NONE', #46752, #77789, #15785 ) ; +#41007 = AXIS2_PLACEMENT_3D ( 'NONE', #65368, #40282, #21818 ) ; +#41008 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922501400, 90.09037803491503400, -28.29483400905891000 ) ) ; +#41009 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725667500, 33.16464174796073600, -28.53896444442200300 ) ) ; +#41010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#41011 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16148, #47380, #66203, #28977 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849974400, 0.007639752840043640200 ), + .UNSPECIFIED. ) ; +#41012 = ADVANCED_FACE ( 'NONE', ( #14501 ), #76767, .F. ) ; +#41013 = AXIS2_PLACEMENT_3D ( 'NONE', #59769, #22502, #66026 ) ; +#41014 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41015 = CARTESIAN_POINT ( 'NONE', ( -9.785741443456030800, 81.52472935029902600, -28.39317435246123000 ) ) ; +#41016 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 3.500000000000007100, 6.847000845227646500 ) ) ; +#41017 = ORIENTED_EDGE ( 'NONE', *, *, #48524, .F. ) ; +#41018 = ORIENTED_EDGE ( 'NONE', *, *, #12984, .T. ) ; +#41019 = ORIENTED_EDGE ( 'NONE', *, *, #72998, .F. ) ; +#41020 = ADVANCED_FACE ( 'NONE', ( #20365 ), #43659, .T. ) ; +#41021 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 37.83333333333334300, -6.205558038030004800 ) ) ; +#41022 = AXIS2_PLACEMENT_3D ( 'NONE', #72543, #35287, #78804 ) ; +#41023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41025 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#41026 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 2.833333333333345000, -9.205558038030003900 ) ) ; +#41027 = CIRCLE ( 'NONE', #30956, 10.00000000000009400 ) ; +#41028 = ORIENTED_EDGE ( 'NONE', *, *, #24504, .T. ) ; +#41029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#41031 = EDGE_CURVE ( 'NONE', #9301, #11747, #8823, .T. ) ; +#41030 = EDGE_LOOP ( 'NONE', ( #9807, #54314, #48004, #72797, #34593 ) ) ; +#41032 = CARTESIAN_POINT ( 'NONE', ( 9.145936125228159200, 44.44999999999998200, -2.529782444581352600 ) ) ; +#41033 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#41034 = FACE_OUTER_BOUND ( 'NONE', #320, .T. ) ; +#41035 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 40.16666666666667900, 9.794441961969994300 ) ) ; +#41036 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#41037 = ORIENTED_EDGE ( 'NONE', *, *, #46158, .F. ) ; +#41038 = VERTEX_POINT ( 'NONE', #30314 ) ; +#41039 = ORIENTED_EDGE ( 'NONE', *, *, #2669, .T. ) ; +#41040 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.56248377813476200, -28.32723995587616600 ) ) ; +#41041 = CARTESIAN_POINT ( 'NONE', ( -16.76918824634332200, 60.94994472024610800, -28.43636979168674700 ) ) ; +#41042 = ORIENTED_EDGE ( 'NONE', *, *, #30707, .T. ) ; +#41043 = ORIENTED_EDGE ( 'NONE', *, *, #21671, .T. ) ; +#41044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79211, #35690, #17190, #60714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782978300, 0.0004366687057310644900 ), + .UNSPECIFIED. ) ; +#41045 = CIRCLE ( 'NONE', #45227, 10.00000000000009400 ) ; +#41046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41047 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174760100, 60.16054007504465100, -28.34042301926881200 ) ) ; +#41048 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136831400, 38.92958814301754000, -28.27321389036145000 ) ) ; +#41049 = ADVANCED_FACE ( 'NONE', ( #60259 ), #10615, .F. ) ; +#41050 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000074600, 82.97376207875024100, -28.70555803803030800 ) ) ; +#41051 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 28.31066373133500800, -28.53923937255169500 ) ) ; +#41052 = EDGE_CURVE ( 'NONE', #46133, #53446, #27166, .T. ) ; +#41053 = CIRCLE ( 'NONE', #41071, 10.00000000000009200 ) ; +#41054 = ORIENTED_EDGE ( 'NONE', *, *, #15420, .F. ) ; +#41055 = ORIENTED_EDGE ( 'NONE', *, *, #10150, .F. ) ; +#41057 = EDGE_CURVE ( 'NONE', #22368, #66582, #75187, .T. ) ; +#41056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59166, #21922, #77941, #40664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574988970100E-007, 0.0007596410370205590600 ), + .UNSPECIFIED. ) ; +#41058 = EDGE_LOOP ( 'NONE', ( #78059, #1095, #22235, #48944 ) ) ; +#41059 = VERTEX_POINT ( 'NONE', #5528 ) ; +#41060 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41062 = CARTESIAN_POINT ( 'NONE', ( -12.06092805703277400, 10.00000000000006900, -28.70555803802998100 ) ) ; +#41063 = EDGE_LOOP ( 'NONE', ( #32065, #69025, #14964 ) ) ; +#41064 = FACE_OUTER_BOUND ( 'NONE', #5839, .T. ) ; +#41065 = CARTESIAN_POINT ( 'NONE', ( -7.853869048511098700, 8.865230368351721100, -28.64096433122108500 ) ) ; +#41066 = EDGE_CURVE ( 'NONE', #13752, #65404, #78763, .T. ) ; +#41067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41068 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.36762008758049100, -28.26633708900884300 ) ) ; +#41069 = EDGE_CURVE ( 'NONE', #42340, #30323, #12564, .T. ) ; +#41070 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112213300, 29.07332680091207800, -28.37233769390154200 ) ) ; +#41071 = AXIS2_PLACEMENT_3D ( 'NONE', #60217, #22933, #66459 ) ; +#41072 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 43.66666666666667100, -5.205558038030003100 ) ) ; +#41073 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444370800, 89.72166103827331100, -28.53892303408224200 ) ) ; +#41074 = CONICAL_SURFACE ( 'NONE', #56015, 10.50000000000009600, 0.7853981633974500600 ) ; +#41075 = ORIENTED_EDGE ( 'NONE', *, *, #22944, .F. ) ; +#41076 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148632300, 46.50238095238078300, -28.70555803802996700 ) ) ; +#41077 = ORIENTED_EDGE ( 'NONE', *, *, #49259, .T. ) ; +#41078 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#41079 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489667300, 9.940690926013793700, -28.35186440610855000 ) ) ; +#41080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41081 = AXIS2_PLACEMENT_3D ( 'NONE', #73083, #4775, #29579 ) ; +#41082 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#41083 = CARTESIAN_POINT ( 'NONE', ( 1.851224256354304000, 57.15000000000015500, 6.686077578882575700 ) ) ; +#41084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41085 = EDGE_CURVE ( 'NONE', #54691, #70595, #60744, .T. ) ; +#41086 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43104, #18105, #12127, #55618 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352854029600E-007, 0.0007670609591620245100 ), + .UNSPECIFIED. ) ; +#41087 = EDGE_CURVE ( 'NONE', #36509, #12775, #62203, .T. ) ; +#41088 = AXIS2_PLACEMENT_3D ( 'NONE', #27582, #52551, #58824 ) ; +#41089 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 36.94142842854297000, -28.20555803802995200 ) ) ; +#41090 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41091 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 55.33333333333334300, -8.133761268305512700 ) ) ; +#41092 = VERTEX_POINT ( 'NONE', #43299 ) ; +#41093 = CARTESIAN_POINT ( 'NONE', ( 15.27292969368545700, 75.79999999999984100, -28.53959444491381700 ) ) ; +#41094 = CARTESIAN_POINT ( 'NONE', ( -17.03177803894783100, 90.28233213024647300, -28.25051428653848600 ) ) ; +#41095 = EDGE_LOOP ( 'NONE', ( #2090, #19213, #32379 ) ) ; +#41096 = CARTESIAN_POINT ( 'NONE', ( -2.602551912736881700, 90.86668251344242700, -28.60300612529336600 ) ) ; +#41097 = EDGE_CURVE ( 'NONE', #69461, #73096, #46227, .T. ) ; +#41098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41099 = AXIS2_PLACEMENT_3D ( 'NONE', #57957, #20712, #64247 ) ; +#41100 = AXIS2_PLACEMENT_3D ( 'NONE', #42547, #42820, #80106 ) ; +#41101 = ORIENTED_EDGE ( 'NONE', *, *, #69212, .T. ) ; +#41102 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999984100, -28.20555803803014400 ) ) ; +#41103 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24106, #61391, #30376, #73886 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169438000, 0.001302223101367930900 ), + .UNSPECIFIED. ) ; +#41104 = ADVANCED_FACE ( 'NONE', ( #80694 ), #72901, .F. ) ; +#41105 = FACE_OUTER_BOUND ( 'NONE', #57291, .T. ) ; +#41106 = ORIENTED_EDGE ( 'NONE', *, *, #76790, .T. ) ; +#41107 = CIRCLE ( 'NONE', #28527, 10.50000000000009600 ) ; +#41108 = ORIENTED_EDGE ( 'NONE', *, *, #72192, .F. ) ; +#41109 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181873500, 51.65075715145283700, -28.20555803803047800 ) ) ; +#41110 = VERTEX_POINT ( 'NONE', #12591 ) ; +#41111 = FACE_OUTER_BOUND ( 'NONE', #77408, .T. ) ; +#41112 = ORIENTED_EDGE ( 'NONE', *, *, #35033, .F. ) ; +#41113 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 74.13556610137281700, -28.54207364681943600 ) ) ; +#41114 = ORIENTED_EDGE ( 'NONE', *, *, #48999, .T. ) ; +#41115 = ADVANCED_FACE ( 'NONE', ( #74840 ), #39772, .T. ) ; +#41117 = ORIENTED_EDGE ( 'NONE', *, *, #30132, .F. ) ; +#41116 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 12.16666666666667300, 0.1341879241256129200 ) ) ; +#41118 = ORIENTED_EDGE ( 'NONE', *, *, #7302, .F. ) ; +#41119 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550800, 56.13383585008146800, -28.37247596307072300 ) ) ; +#41120 = CIRCLE ( 'NONE', #24909, 9.500000000000142100 ) ; +#41121 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658318300, 61.44848545219039700, -28.67627428870433100 ) ) ; +#41122 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#41123 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 52.33333333333334300, 2.794441961969998300 ) ) ; +#41124 = ORIENTED_EDGE ( 'NONE', *, *, #49724, .F. ) ; +#41125 = AXIS2_PLACEMENT_3D ( 'NONE', #60995, #23735, #67237 ) ; +#41126 = CONICAL_SURFACE ( 'NONE', #20713, 10.50000000000009600, 0.7853981633974500600 ) ; +#41127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41128 = ORIENTED_EDGE ( 'NONE', *, *, #68478, .F. ) ; +#41129 = ADVANCED_FACE ( 'NONE', ( #8626 ), #25201, .T. ) ; +#41130 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#41131 = ORIENTED_EDGE ( 'NONE', *, *, #29012, .T. ) ; +#41132 = ORIENTED_EDGE ( 'NONE', *, *, #65151, .T. ) ; +#41133 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47495, #53786, #29094, #72577 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539782000, 0.0007090531776679212400 ), + .UNSPECIFIED. ) ; +#41134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41135 = CIRCLE ( 'NONE', #71043, 10.00000000000009600 ) ; +#41136 = CARTESIAN_POINT ( 'NONE', ( -2.254657264815547200, 41.50380841767819400, -28.64142799534453200 ) ) ; +#41137 = EDGE_LOOP ( 'NONE', ( #58456, #25581, #38584, #71192 ) ) ; +#41138 = CONICAL_SURFACE ( 'NONE', #32542, 10.50000000000009600, 0.7853981633974500600 ) ; +#41139 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #62713, #12937 ) ; +#41140 = ADVANCED_FACE ( 'NONE', ( #58278 ), #54377, .F. ) ; +#41141 = EDGE_CURVE ( 'NONE', #13063, #69758, #70923, .T. ) ; +#41142 = ORIENTED_EDGE ( 'NONE', *, *, #16190, .T. ) ; +#41143 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973000, 66.44146991525221300, -28.52629299565633000 ) ) ; +#41144 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761900, 81.43945992495534400, -28.34042301926881500 ) ) ; +#41145 = AXIS2_PLACEMENT_3D ( 'NONE', #63451, #26192, #69675 ) ; +#41146 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.16749699759768100, -28.20555803802997700 ) ) ; +#41147 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41148 = FACE_OUTER_BOUND ( 'NONE', #49376, .T. ) ; +#41149 = ORIENTED_EDGE ( 'NONE', *, *, #43170, .F. ) ; +#41150 = FACE_OUTER_BOUND ( 'NONE', #66564, .T. ) ; +#41151 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 17.91070809551053200, -28.20555803802992800 ) ) ; +#41152 = CARTESIAN_POINT ( 'NONE', ( -10.03178561562175400, 71.31767869357338400, -28.25052235028429200 ) ) ; +#41153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41154 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41155 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 28.84510448120794400, -28.37193179497693400 ) ) ; +#41156 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390812100, 51.46283204837324400, -28.48697406221691300 ) ) ; +#41157 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41161 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41162 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41163 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459498000, 69.08026449164323400, -28.70555803803005200 ) ) ; +#41164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41165 = EDGE_CURVE ( 'NONE', #71197, #39864, #31817, .T. ) ; +#41166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41167 = EDGE_CURVE ( 'NONE', #8208, #1580, #17343, .T. ) ; +#41168 = VERTEX_POINT ( 'NONE', #17913 ) ; +#41169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41170 = ORIENTED_EDGE ( 'NONE', *, *, #4946, .F. ) ; +#41171 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281057700, 71.13768531620323200, -28.37082013777818200 ) ) ; +#41172 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000002700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#41173 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 65.79999999999999700, -28.63843632546336000 ) ) ; +#41174 = EDGE_CURVE ( 'NONE', #26492, #8099, #2859, .T. ) ; +#41175 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725301600, 83.66464174796081500, -28.53896444442232300 ) ) ; +#41176 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25487, #37680, #31734, #75241 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258657406100, 0.0009376791149928384600 ), + .UNSPECIFIED. ) ; +#41177 = EDGE_CURVE ( 'NONE', #12178, #7991, #69185, .T. ) ; +#41178 = CIRCLE ( 'NONE', #58470, 9.500000000000097700 ) ; +#41179 = EDGE_LOOP ( 'NONE', ( #43753, #79692, #4562, #32218 ) ) ; +#41180 = AXIS2_PLACEMENT_3D ( 'NONE', #56474, #68999, #12991 ) ; +#41181 = CONICAL_SURFACE ( 'NONE', #20629, 10.00000000000009200, 0.7853981633974447300 ) ; +#41182 = ORIENTED_EDGE ( 'NONE', *, *, #71441, .F. ) ; +#41183 = ORIENTED_EDGE ( 'NONE', *, *, #29175, .F. ) ; +#41184 = CIRCLE ( 'NONE', #15759, 10.00000000000009200 ) ; +#41185 = ORIENTED_EDGE ( 'NONE', *, *, #59920, .F. ) ; +#41186 = ORIENTED_EDGE ( 'NONE', *, *, #34963, .F. ) ; +#41187 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 58.33333333333334300, -8.133761268305512700 ) ) ; +#41188 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #24149 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #65239, #27973, #71451 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#41189 = CIRCLE ( 'NONE', #29581, 10.00000000000009200 ) ; +#41190 = EDGE_CURVE ( 'NONE', #39296, #60477, #45597, .T. ) ; +#41191 = EDGE_CURVE ( 'NONE', #19042, #58834, #54725, .T. ) ; +#41192 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41193 = EDGE_CURVE ( 'NONE', #28056, #29475, #23249, .T. ) ; +#41194 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#41195 = ADVANCED_FACE ( 'NONE', ( #6688 ), #52400, .F. ) ; +#41196 = CONICAL_SURFACE ( 'NONE', #78525, 10.50000000000009800, 0.7853981633974500600 ) ; +#41197 = PLANE ( 'NONE', #5531 ) ; +#41198 = ORIENTED_EDGE ( 'NONE', *, *, #57997, .F. ) ; +#41199 = CIRCLE ( 'NONE', #50329, 10.50000000000009600 ) ; +#41200 = AXIS2_PLACEMENT_3D ( 'NONE', #3988, #16518, #60054 ) ; +#41201 = VERTEX_POINT ( 'NONE', #80730 ) ; +#41202 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 20.25489551879204000, -28.37193179497694500 ) ) ; +#41203 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551028200, 52.49999999999999300, 4.650848422521008300 ) ) ; +#41204 = ORIENTED_EDGE ( 'NONE', *, *, #1948, .F. ) ; +#41205 = VERTEX_POINT ( 'NONE', #6202 ) ; +#41206 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 89.94924284854739900, -28.20555803802997700 ) ) ; +#41207 = ORIENTED_EDGE ( 'NONE', *, *, #8492, .T. ) ; +#41208 = EDGE_CURVE ( 'NONE', #6009, #15003, #40261, .T. ) ; +#41209 = FACE_OUTER_BOUND ( 'NONE', #6606, .T. ) ; +#41210 = ADVANCED_FACE ( 'NONE', ( #41720 ), #19333, .T. ) ; +#41211 = AXIS2_PLACEMENT_3D ( 'NONE', #62045, #43765, #31305 ) ; +#41212 = AXIS2_PLACEMENT_3D ( 'NONE', #33458, #2430, #64510 ) ; +#41213 = CARTESIAN_POINT ( 'NONE', ( 10.93544426077511700, 90.09037803491499100, -28.29483400905924400 ) ) ; +#41214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41215 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#41216 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 29.66666666666667100, 4.294441961969993400 ) ) ; +#41217 = CARTESIAN_POINT ( 'NONE', ( 10.22125914545565600, 49.66476764525111800, -28.30311733712048600 ) ) ; +#41218 = ORIENTED_EDGE ( 'NONE', *, *, #73704, .F. ) ; +#41219 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515320000, 61.01872124563908500, -28.53757464917577400 ) ) ; +#41220 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.43250300240228500, -28.20555803802997700 ) ) ; +#41221 = ORIENTED_EDGE ( 'NONE', *, *, #44584, .T. ) ; +#41222 = ADVANCED_FACE ( 'NONE', ( #56321 ), #67034, .T. ) ; +#41223 = FACE_OUTER_BOUND ( 'NONE', #23900, .T. ) ; +#41224 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57629, #51336, #7845, #63917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247634572700, 0.0009605145132132172400 ), + .UNSPECIFIED. ) ; +#41225 = CARTESIAN_POINT ( 'NONE', ( -14.16026969497022700, 8.846142569402809700, -28.63881122220705300 ) ) ; +#41226 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41227 = ADVANCED_FACE ( 'NONE', ( #35895 ), #37814, .T. ) ; +#41228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41229 = ADVANCED_FACE ( 'NONE', ( #2759 ), #822, .T. ) ; +#41230 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528428000, 49.63131911501857700, -28.51286550264483200 ) ) ; +#41231 = AXIS2_PLACEMENT_3D ( 'NONE', #21040, #27306, #14770 ) ; +#41232 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950487200, 20.90771342879314100, -28.53891855579975000 ) ) ; +#41233 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 64.16666666666667100, 0.1341879241256129200 ) ) ; +#41234 = FACE_OUTER_BOUND ( 'NONE', #65197, .T. ) ; +#41235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41236 = PLANE ( 'NONE', #51873 ) ; +#41237 = EDGE_LOOP ( 'NONE', ( #4693, #32450, #26350 ) ) ; +#41238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41239 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034485600, 10.17701665379206900, -28.20555803803018300 ) ) ; +#41240 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736718000, 35.04999999999999700, -28.70555803802995200 ) ) ; +#41241 = AXIS2_PLACEMENT_3D ( 'NONE', #17460, #42449, #5210 ) ; +#41242 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312764400, 9.997690108970898500, -28.61774594593776700 ) ) ; +#41243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41244 = ORIENTED_EDGE ( 'NONE', *, *, #71205, .F. ) ; +#41245 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 51.96823913367205700, -28.70555803802997700 ) ) ; +#41246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41247 = ORIENTED_EDGE ( 'NONE', *, *, #39646, .T. ) ; +#41248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41249 = CIRCLE ( 'NONE', #3165, 10.00000000000009200 ) ; +#41250 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849241500, 18.27966528189946900, -28.30868034705256500 ) ) ; +#41251 = EDGE_LOOP ( 'NONE', ( #24148, #4202, #29269 ) ) ; +#41252 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609200500, 46.18533208989818900, -28.53910738522652200 ) ) ; +#41253 = CIRCLE ( 'NONE', #33597, 10.00000000000009200 ) ; +#41254 = AXIS2_PLACEMENT_3D ( 'NONE', #75481, #69483, #943 ) ; +#41255 = EDGE_LOOP ( 'NONE', ( #54687, #11722, #37208, #36696 ) ) ; +#41256 = FACE_OUTER_BOUND ( 'NONE', #65693, .T. ) ; +#41257 = ORIENTED_EDGE ( 'NONE', *, *, #18174, .F. ) ; +#41258 = EDGE_LOOP ( 'NONE', ( #46243, #79323, #13956, #73195 ) ) ; +#41259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41260 = ORIENTED_EDGE ( 'NONE', *, *, #71698, .F. ) ; +#41261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41262 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#41263 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41264 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346247200, 71.39409401757579600, -28.39369363572379600 ) ) ; +#41265 = CARTESIAN_POINT ( 'NONE', ( 9.813460021729298400, 6.877501000800541500, -28.20555803802992800 ) ) ; +#41266 = CIRCLE ( 'NONE', #19035, 10.00000000000009200 ) ; +#41267 = ORIENTED_EDGE ( 'NONE', *, *, #11544, .T. ) ; +#41268 = CIRCLE ( 'NONE', #21672, 10.50000000000009600 ) ; +#41269 = EDGE_CURVE ( 'NONE', #8428, #73936, #33938, .T. ) ; +#41270 = CARTESIAN_POINT ( 'NONE', ( 2.532379739681780000, 94.26940775139534900, -28.34592507370789600 ) ) ; +#41271 = EDGE_LOOP ( 'NONE', ( #1131, #36970, #47800, #30866 ) ) ; +#41272 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41273 = PLANE ( 'NONE', #69800 ) ; +#41274 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 1.333333333333345900, -6.705558038030005700 ) ) ; +#41275 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28589, #65829, #34822, #78332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839426248500 ), + .UNSPECIFIED. ) ; +#41276 = ORIENTED_EDGE ( 'NONE', *, *, #78138, .F. ) ; +#41278 = EDGE_CURVE ( 'NONE', #39864, #3351, #4731, .T. ) ; +#41277 = ORIENTED_EDGE ( 'NONE', *, *, #77399, .T. ) ; +#41279 = EDGE_LOOP ( 'NONE', ( #4356, #12351, #6399, #48885, #8292 ) ) ; +#41280 = PLANE ( 'NONE', #50812 ) ; +#41281 = ORIENTED_EDGE ( 'NONE', *, *, #64860, .F. ) ; +#41282 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31724, #68965, #37938, #685 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.052107275601604000E-016, 0.001679852151211031000 ), + .UNSPECIFIED. ) ; +#41283 = CIRCLE ( 'NONE', #79388, 10.00000000000009600 ) ; +#41284 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 35.66666666666666400, 3.124568980892192800 ) ) ; +#41285 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41286 = EDGE_CURVE ( 'NONE', #12824, #26714, #25833, .T. ) ; +#41287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41288 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 0.6666666666666765100, 5.722645192245505700 ) ) ; +#41289 = EDGE_CURVE ( 'NONE', #14529, #8316, #11373, .T. ) ; +#41291 = ORIENTED_EDGE ( 'NONE', *, *, #36867, .T. ) ; +#41290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66278, #29048, #4227, #47728 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572497345400E-007, 0.0007596410370205632900 ), + .UNSPECIFIED. ) ; +#41292 = ORIENTED_EDGE ( 'NONE', *, *, #49596, .T. ) ; +#41293 = CARTESIAN_POINT ( 'NONE', ( -1.266348137463069200E-013, 83.65857157145696000, -28.20555803803014400 ) ) ; +#41294 = EDGE_LOOP ( 'NONE', ( #76392, #78396, #39963, #18252, #39999 ) ) ; +#41295 = EDGE_CURVE ( 'NONE', #9664, #862, #68979, .T. ) ; +#41296 = EDGE_LOOP ( 'NONE', ( #29032, #40174, #34047, #69822 ) ) ; +#41297 = CARTESIAN_POINT ( 'NONE', ( 5.377794029324432400, 44.44999999999996700, -9.004793159855784900 ) ) ; +#41298 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#41299 = CIRCLE ( 'NONE', #26809, 9.500000000000097700 ) ; +#41300 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 38.00000000000000700, -12.20555803803000200 ) ) ; +#41301 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999936100, 15.70389005397358100, -28.37519436813209200 ) ) ; +#41302 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41303 = AXIS2_PLACEMENT_3D ( 'NONE', #8338, #51843, #14634 ) ; +#41304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39422, #20680, #64493, #27217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006649316450227372700, 0.0009605139212323209700 ), + .UNSPECIFIED. ) ; +#41305 = EDGE_CURVE ( 'NONE', #24430, #55552, #17403, .T. ) ; +#41306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41307 = EDGE_CURVE ( 'NONE', #69758, #24749, #50431, .T. ) ; +#41308 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 20.86172549728275200, -28.47230003642272300 ) ) ; +#41309 = EDGE_CURVE ( 'NONE', #19106, #70148, #21303, .T. ) ; +#41310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41312 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752696500, 69.51229806853761800, -28.47147304844873300 ) ) ; +#41313 = AXIS2_PLACEMENT_3D ( 'NONE', #55812, #18574, #62102 ) ; +#41314 = FACE_OUTER_BOUND ( 'NONE', #78998, .T. ) ; +#41315 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743565200, 33.16464174796073600, -28.53896444442202100 ) ) ; +#41316 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#41317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41319 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41320 = CARTESIAN_POINT ( 'NONE', ( 15.96403123228313700, 9.957507269861936900, -28.66554294595027500 ) ) ; +#41321 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034405500, 38.92298334620738800, -28.20555803802996000 ) ) ; +#41323 = ORIENTED_EDGE ( 'NONE', *, *, #62541, .T. ) ; +#41322 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41324 = ADVANCED_FACE ( 'NONE', ( #48488 ), #30075, .F. ) ; +#41325 = AXIS2_PLACEMENT_3D ( 'NONE', #64654, #27385, #70874 ) ; +#41326 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368900, 60.79999999999998300, -28.55171188418376000 ) ) ; +#41327 = ORIENTED_EDGE ( 'NONE', *, *, #44836, .F. ) ; +#41328 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56635, #13167, #62932, #25667 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001055846569138482900 ), + .UNSPECIFIED. ) ; +#41329 = ADVANCED_FACE ( 'NONE', ( #15449 ), #77716, .F. ) ; +#41330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41331 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41332 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284931700, 20.32033471810044000, -28.30868034705250100 ) ) ; +#41333 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123094600, 29.28860447109612900, -28.53900456328625500 ) ) ; +#41334 = CIRCLE ( 'NONE', #80269, 10.00000000000009200 ) ; +#41335 = CIRCLE ( 'NONE', #38221, 10.50000000000009600 ) ; +#41336 = VERTEX_POINT ( 'NONE', #57315 ) ; +#41337 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 41.49999999999998600, 4.650848422521012700 ) ) ; +#41338 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 96.59999999999999400, -18.70555803803001300 ) ) ; +#41339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41340 = LINE ( 'NONE', #70348, #26760 ) ; +#41341 = CIRCLE ( 'NONE', #63273, 9.500000000000099500 ) ; +#41342 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853719100, 61.25732391202397800, -28.20555803802997700 ) ) ; +#41343 = ORIENTED_EDGE ( 'NONE', *, *, #2756, .T. ) ; +#41344 = ORIENTED_EDGE ( 'NONE', *, *, #34417, .F. ) ; +#41345 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973384600, 87.33501542110279600, -28.70555803803001600 ) ) ; +#41346 = AXIS2_PLACEMENT_3D ( 'NONE', #71764, #34496, #78001 ) ; +#41347 = PLANE ( 'NONE', #65309 ) ; +#41348 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 52.18315603019263400, -28.70555803803024400 ) ) ; +#41349 = CARTESIAN_POINT ( 'NONE', ( -1.500843037795219800, 57.15000000000060300, 7.520761312465657200 ) ) ; +#41350 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079883400, 9.933836696121286300, -28.27375072930953700 ) ) ; +#41351 = ADVANCED_FACE ( 'NONE', ( #13512 ), #44559, .F. ) ; +#41352 = CIRCLE ( 'NONE', #48680, 10.50000000000009600 ) ; +#41353 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41354 = ORIENTED_EDGE ( 'NONE', *, *, #15242, .F. ) ; +#41355 = CIRCLE ( 'NONE', #76332, 10.00000000000009400 ) ; +#41356 = ORIENTED_EDGE ( 'NONE', *, *, #22181, .T. ) ; +#41357 = EDGE_CURVE ( 'NONE', #13616, #5527, #77666, .T. ) ; +#41358 = ORIENTED_EDGE ( 'NONE', *, *, #30499, .T. ) ; +#41359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41360 = AXIS2_PLACEMENT_3D ( 'NONE', #26017, #69493, #32248 ) ; +#41361 = ORIENTED_EDGE ( 'NONE', *, *, #51505, .F. ) ; +#41362 = ORIENTED_EDGE ( 'NONE', *, *, #38295, .T. ) ; +#41363 = CARTESIAN_POINT ( 'NONE', ( -2.497924978448501100, 90.99854748491415500, -28.70555803803014400 ) ) ; +#41364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41365 = FACE_OUTER_BOUND ( 'NONE', #56097, .T. ) ; +#41366 = EDGE_LOOP ( 'NONE', ( #36362, #30133, #42655, #32137 ) ) ; +#41367 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849395600, 9.820334718100513200, -28.30868034705253300 ) ) ; +#41368 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000006900, 63.42856308690550500, -28.36981695106818800 ) ) ; +#41369 = ORIENTED_EDGE ( 'NONE', *, *, #35139, .F. ) ; +#41370 = AXIS2_PLACEMENT_3D ( 'NONE', #26698, #70179, #32921 ) ; +#41371 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653751600, 70.20590598242374400, -28.39369363572359700 ) ) ; +#41372 = ORIENTED_EDGE ( 'NONE', *, *, #72179, .T. ) ; +#41373 = FACE_OUTER_BOUND ( 'NONE', #938, .T. ) ; +#41374 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 10.00000000000001100, -1.205558038030002800 ) ) ; +#41375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41377 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.16666666666667900, -3.349151577478988200 ) ) ; +#41378 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32464, #75979, #38686, #1445 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283326620100, 0.0007287255810274889800 ), + .UNSPECIFIED. ) ; +#41379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41380 = EDGE_CURVE ( 'NONE', #15771, #64333, #46533, .T. ) ; +#41381 = CONICAL_SURFACE ( 'NONE', #24096, 10.00000000000009200, 0.7853981633974447300 ) ; +#41382 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#41383 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444388600, 81.87833896172664100, -28.53892303408222000 ) ) ; +#41384 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59733, #3938, #22727, #66255 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697750139600E-007, 0.0008724363063898938000 ), + .UNSPECIFIED. ) ; +#41385 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223623600, 59.83407839971520300, -28.37510699173780500 ) ) ; +#41386 = ORIENTED_EDGE ( 'NONE', *, *, #51038, .T. ) ; +#41387 = CARTESIAN_POINT ( 'NONE', ( -17.04026895850641700, 20.37561462481247100, -28.30309985153374400 ) ) ; +#41388 = ORIENTED_EDGE ( 'NONE', *, *, #38992, .F. ) ; +#41389 = FACE_OUTER_BOUND ( 'NONE', #18572, .T. ) ; +#41390 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#41391 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6665, #68694, #12946, #56440 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572499928900E-007, 0.0007596410370205418200 ), + .UNSPECIFIED. ) ; +#41392 = ORIENTED_EDGE ( 'NONE', *, *, #47194, .F. ) ; +#41393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41394 = ADVANCED_FACE ( 'NONE', ( #79677 ), #75759, .F. ) ; +#41395 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#41396 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#41397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41398 = CIRCLE ( 'NONE', #64100, 9.500000000000099500 ) ; +#41399 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252842800, 28.63131911501858400, -28.51286550264480000 ) ) ; +#41400 = CIRCLE ( 'NONE', #63768, 10.50000000000009600 ) ; +#41401 = EDGE_CURVE ( 'NONE', #46667, #24052, #63231, .T. ) ; +#41402 = ORIENTED_EDGE ( 'NONE', *, *, #43685, .T. ) ; +#41403 = EDGE_CURVE ( 'NONE', #65338, #62677, #48719, .T. ) ; +#41404 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 47.42318720225497200, -28.70555803802996700 ) ) ; +#41405 = CARTESIAN_POINT ( 'NONE', ( 3.014248196868713600, 71.58005252438381700, -28.24986299608867700 ) ) ; +#41406 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 57.94142842854304100, -28.20555803802997700 ) ) ; +#41407 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30606, #67851, #80352, #43074 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099548350528500E-007, 0.0008759529789574180000 ), + .UNSPECIFIED. ) ; +#41408 = FACE_OUTER_BOUND ( 'NONE', #14206, .T. ) ; +#41409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41410 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#41411 = EDGE_LOOP ( 'NONE', ( #4512, #22334, #64883 ) ) ; +#41412 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41413 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 70.34267608797617300, -28.20555803803014400 ) ) ; +#41415 = ORIENTED_EDGE ( 'NONE', *, *, #18308, .T. ) ; +#41414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41416 = ADVANCED_FACE ( 'NONE', ( #61204 ), #20599, .T. ) ; +#41417 = CARTESIAN_POINT ( 'NONE', ( 10.03178561562192300, 51.31767869357326400, -28.25052235028445200 ) ) ; +#41418 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#41419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41420 = AXIS2_PLACEMENT_3D ( 'NONE', #67941, #49405, #12194 ) ; +#41421 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41422 = EDGE_CURVE ( 'NONE', #12986, #37113, #28117, .T. ) ; +#41423 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783879200, 60.16749699759768800, -28.23966044827355000 ) ) ; +#41424 = EDGE_CURVE ( 'NONE', #29557, #26549, #34297, .T. ) ; +#41426 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38677, #1434, #44917, #7674 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674113792700E-007, 0.0007987728781052020500 ), + .UNSPECIFIED. ) ; +#41425 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#41427 = EDGE_CURVE ( 'NONE', #63226, #22837, #65103, .T. ) ; +#41428 = FACE_OUTER_BOUND ( 'NONE', #62286, .T. ) ; +#41429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41430 = FACE_OUTER_BOUND ( 'NONE', #53216, .T. ) ; +#41431 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41432 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#41433 = ORIENTED_EDGE ( 'NONE', *, *, #21905, .T. ) ; +#41434 = AXIS2_PLACEMENT_3D ( 'NONE', #9022, #34073, #71062 ) ; +#41435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41436 = ORIENTED_EDGE ( 'NONE', *, *, #79060, .T. ) ; +#41437 = ORIENTED_EDGE ( 'NONE', *, *, #79926, .F. ) ; +#41438 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#41439 = EDGE_LOOP ( 'NONE', ( #38035, #63895, #3971 ) ) ; +#41440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41441 = EDGE_LOOP ( 'NONE', ( #70944, #58453, #79420 ) ) ; +#41442 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#41443 = CIRCLE ( 'NONE', #46309, 10.50000000000009600 ) ; +#41444 = AXIS2_PLACEMENT_3D ( 'NONE', #42710, #29999, #5479 ) ; +#41445 = AXIS2_PLACEMENT_3D ( 'NONE', #72037, #65526, #46961 ) ; +#41446 = CARTESIAN_POINT ( 'NONE', ( 15.32706481948994400, 33.90566704911476100, -28.70129136469037700 ) ) ; +#41447 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41448 = ORIENTED_EDGE ( 'NONE', *, *, #33079, .F. ) ; +#41449 = AXIS2_PLACEMENT_3D ( 'NONE', #47574, #10353, #53863 ) ; +#41450 = ORIENTED_EDGE ( 'NONE', *, *, #61826, .F. ) ; +#41451 = ADVANCED_FACE ( 'NONE', ( #63141 ), #26152, .T. ) ; +#41452 = ORIENTED_EDGE ( 'NONE', *, *, #53897, .T. ) ; +#41453 = CIRCLE ( 'NONE', #60773, 10.00000000000009600 ) ; +#41454 = ORIENTED_EDGE ( 'NONE', *, *, #1593, .F. ) ; +#41455 = ORIENTED_EDGE ( 'NONE', *, *, #44801, .T. ) ; +#41456 = FACE_OUTER_BOUND ( 'NONE', #68625, .T. ) ; +#41457 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 56.16666666666667900, 6.794441961969992500 ) ) ; +#41458 = AXIS2_PLACEMENT_3D ( 'NONE', #45773, #8529, #52033 ) ; +#41459 = EDGE_CURVE ( 'NONE', #75712, #7051, #59223, .T. ) ; +#41460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41461 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3769, #28581, #16308, #59838 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672710184600E-007, 0.0007670610367943055400 ), + .UNSPECIFIED. ) ; +#41462 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41464 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#41465 = FACE_OUTER_BOUND ( 'NONE', #20104, .T. ) ; +#41466 = CARTESIAN_POINT ( 'NONE', ( -3.639502927797187800, 9.932503002402294000, -28.25438406275895900 ) ) ; +#41467 = EDGE_CURVE ( 'NONE', #59983, #10719, #19837, .T. ) ; +#41468 = CONICAL_SURFACE ( 'NONE', #34794, 10.00000000000009200, 0.7853981633974447300 ) ; +#41469 = AXIS2_PLACEMENT_3D ( 'NONE', #70483, #33230, #76735 ) ; +#41470 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298136500, 85.79999999999967000, -28.70555803803030800 ) ) ; +#41471 = EDGE_LOOP ( 'NONE', ( #26336, #58060, #29701, #13072 ) ) ; +#41472 = EDGE_LOOP ( 'NONE', ( #72136, #77978, #16352 ) ) ; +#41473 = FACE_OUTER_BOUND ( 'NONE', #54004, .T. ) ; +#41474 = ORIENTED_EDGE ( 'NONE', *, *, #30712, .T. ) ; +#41475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41476 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100658600, 49.12363993080086300, -28.38670679782169200 ) ) ; +#41477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41478 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 27.50000000000000700, -9.258116921287651700 ) ) ; +#41479 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41480 = CIRCLE ( 'NONE', #56195, 9.500000000000099500 ) ; +#41481 = AXIS2_PLACEMENT_3D ( 'NONE', #30278, #36477, #30015 ) ; +#41482 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#41483 = CONICAL_SURFACE ( 'NONE', #57441, 10.00000000000009200, 0.7853981633974447300 ) ; +#41484 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444654600, 61.87833896172689000, -28.53892303408235500 ) ) ; +#41485 = ORIENTED_EDGE ( 'NONE', *, *, #48411, .T. ) ; +#41486 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548998800, 18.15930907398571700, -28.35186440610893000 ) ) ; +#41487 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41488 = ORIENTED_EDGE ( 'NONE', *, *, #51057, .T. ) ; +#41489 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466626800, 40.76893971291461600, -28.57333386111660500 ) ) ; +#41490 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019250800, 56.80000000000026000, -28.70555803803047500 ) ) ; +#41491 = ORIENTED_EDGE ( 'NONE', *, *, #49473, .F. ) ; +#41492 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41493 = AXIS2_PLACEMENT_3D ( 'NONE', #68567, #25050, #56044 ) ; +#41494 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66403, #22882, #29188, #72663 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957553771200E-005, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#41495 = ADVANCED_FACE ( 'NONE', ( #31990 ), #24199, .T. ) ; +#41496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41497 = CARTESIAN_POINT ( 'NONE', ( -16.44668611327757900, 51.48387403443064200, -28.57421789838282700 ) ) ; +#41498 = CONICAL_SURFACE ( 'NONE', #76227, 10.00000000000009600, 0.7853981633974482800 ) ; +#41499 = ORIENTED_EDGE ( 'NONE', *, *, #36026, .F. ) ; +#41500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41501 = EDGE_CURVE ( 'NONE', #3836, #74697, #40716, .T. ) ; +#41502 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 62.00000000000002800, -1.205558038030002800 ) ) ; +#41503 = EDGE_LOOP ( 'NONE', ( #22078, #56899, #69699 ) ) ; +#41504 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41505 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857315100, 33.17681279774500100, -28.70555803802996700 ) ) ; +#41506 = ORIENTED_EDGE ( 'NONE', *, *, #21557, .F. ) ; +#41507 = ORIENTED_EDGE ( 'NONE', *, *, #14637, .T. ) ; +#41508 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999974200, 16.16545993132805500, -28.70555803803001600 ) ) ; +#41509 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69943, #76738, #14734, #58247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284239400, 0.0006028148015512314400 ), + .UNSPECIFIED. ) ; +#41510 = ORIENTED_EDGE ( 'NONE', *, *, #12479, .F. ) ; +#41511 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41512 = CARTESIAN_POINT ( 'NONE', ( 3.874036235437264600, 9.632690823624496800, -28.36487527072587200 ) ) ; +#41513 = CIRCLE ( 'NONE', #61021, 10.50000000000009600 ) ; +#41514 = ADVANCED_FACE ( 'NONE', ( #73832 ), #9116, .T. ) ; +#41515 = FACE_OUTER_BOUND ( 'NONE', #64661, .T. ) ; +#41517 = EDGE_LOOP ( 'NONE', ( #16997, #52908, #20366 ) ) ; +#41516 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648800, 39.08087956867533600, -28.30223257055581600 ) ) ; +#41518 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#41519 = ORIENTED_EDGE ( 'NONE', *, *, #22348, .F. ) ; +#41520 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.23796787468681700, -28.38801640354855800 ) ) ; +#41521 = FACE_OUTER_BOUND ( 'NONE', #46284, .T. ) ; +#41522 = CARTESIAN_POINT ( 'NONE', ( -5.477130487985069100, 50.55000000000000400, -28.56111762074697000 ) ) ; +#41523 = VERTEX_POINT ( 'NONE', #77417 ) ; +#41524 = CARTESIAN_POINT ( 'NONE', ( 1.314034490221701600, 45.54999999999998300, -28.37321477197630100 ) ) ; +#41525 = EDGE_CURVE ( 'NONE', #62756, #50428, #5369, .T. ) ; +#41526 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 9.940690926013784800, -28.35186440610855700 ) ) ; +#41527 = ADVANCED_FACE ( 'NONE', ( #57273 ), #80292, .T. ) ; +#41528 = ORIENTED_EDGE ( 'NONE', *, *, #27730, .F. ) ; +#41529 = CIRCLE ( 'NONE', #61611, 10.50000000000009600 ) ; +#41530 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#41531 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41532 = FACE_OUTER_BOUND ( 'NONE', #51619, .T. ) ; +#41533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41534 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41535 = AXIS2_PLACEMENT_3D ( 'NONE', #4226, #72526, #53996 ) ; +#41536 = EDGE_CURVE ( 'NONE', #69853, #51526, #11557, .T. ) ; +#41537 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999986200, 17.63176086632777000, -28.70555803803009500 ) ) ; +#41538 = EDGE_CURVE ( 'NONE', #20370, #20598, #71694, .T. ) ; +#41539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41540 = ORIENTED_EDGE ( 'NONE', *, *, #16631, .F. ) ; +#41541 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31796, #50503, #56801, #19551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656155355300, 0.001302223101365874400 ), + .UNSPECIFIED. ) ; +#41542 = ADVANCED_FACE ( 'NONE', ( #17195 ), #78357, .F. ) ; +#41543 = EDGE_CURVE ( 'NONE', #72130, #57630, #57219, .T. ) ; +#41544 = AXIS2_PLACEMENT_3D ( 'NONE', #78054, #53288, #16035 ) ; +#41545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41546 = CONICAL_SURFACE ( 'NONE', #16707, 10.50000000000009600, 0.7853981633974500600 ) ; +#41548 = ORIENTED_EDGE ( 'NONE', *, *, #20707, .T. ) ; +#41547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41550 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, -0.8333333333333262600, 1.741883078712356500 ) ) ; +#41551 = CIRCLE ( 'NONE', #47729, 9.500000000000099500 ) ; +#41552 = ORIENTED_EDGE ( 'NONE', *, *, #56280, .F. ) ; +#41553 = CARTESIAN_POINT ( 'NONE', ( 11.56182508409090000, 30.98385710212512500, -28.57719681746178300 ) ) ; +#41554 = ORIENTED_EDGE ( 'NONE', *, *, #75854, .T. ) ; +#41555 = CONICAL_SURFACE ( 'NONE', #44077, 10.50000000000009400, 0.7853981633974500600 ) ; +#41556 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 33.50000000000000700, -4.865812075874393000 ) ) ; +#41557 = AXIS2_PLACEMENT_3D ( 'NONE', #54891, #17655, #61178 ) ; +#41558 = AXIS2_PLACEMENT_3D ( 'NONE', #39181, #57700, #8168 ) ; +#41559 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700200, 23.61903418172678600, -28.69431509262337700 ) ) ; +#41560 = EDGE_LOOP ( 'NONE', ( #20826, #11386, #70464, #56653 ) ) ; +#41561 = EDGE_CURVE ( 'NONE', #60669, #32213, #42747, .T. ) ; +#41562 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40967, #9954, #66000, #28775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192577220500 ), + .UNSPECIFIED. ) ; +#41563 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41564 = EDGE_CURVE ( 'NONE', #907, #25195, #14109, .T. ) ; +#41565 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, -1.499999999999974700, -7.061964498581022400 ) ) ; +#41566 = AXIS2_PLACEMENT_3D ( 'NONE', #35328, #78838, #41545 ) ; +#41567 = CONICAL_SURFACE ( 'NONE', #23339, 10.00000000000009400, 0.7853981633974447300 ) ; +#41568 = CONICAL_SURFACE ( 'NONE', #60996, 10.00000000000009200, 0.7853981633974447300 ) ; +#41569 = ORIENTED_EDGE ( 'NONE', *, *, #54883, .F. ) ; +#41570 = CARTESIAN_POINT ( 'NONE', ( -1.754344465967122100, 44.44999999999998900, -10.53544563100549200 ) ) ; +#41571 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 35.83333333333334300, 9.794441961969999600 ) ) ; +#41572 = CARTESIAN_POINT ( 'NONE', ( -8.466819876342325900, 75.79999999999999700, -28.37307693585060500 ) ) ; +#41573 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819213700, 71.65075715145309200, -28.20555803802997700 ) ) ; +#41574 = EDGE_CURVE ( 'NONE', #29509, #32148, #28356, .T. ) ; +#41575 = ORIENTED_EDGE ( 'NONE', *, *, #10443, .F. ) ; +#41576 = AXIS2_PLACEMENT_3D ( 'NONE', #2124, #58175, #20937 ) ; +#41577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41580 = CARTESIAN_POINT ( 'NONE', ( 2.254548258615041200, 39.09617684379259100, -28.64146614751468400 ) ) ; +#41581 = VECTOR ( 'NONE', #36351, 1000.000000000000000 ) ; +#41582 = VERTEX_POINT ( 'NONE', #67092 ) ; +#41583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41585 = EDGE_LOOP ( 'NONE', ( #25219, #25662, #22166 ) ) ; +#41586 = ORIENTED_EDGE ( 'NONE', *, *, #20922, .F. ) ; +#41587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41588 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36697, #55461, #74271, #36959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736117344500E-007, 0.0006649316450232187600 ), + .UNSPECIFIED. ) ; +#41589 = ORIENTED_EDGE ( 'NONE', *, *, #10032, .F. ) ; +#41590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41591 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 28.23827450271715000, -28.47230003642276900 ) ) ; +#41592 = EDGE_LOOP ( 'NONE', ( #28638, #51837, #55534 ) ) ; +#41593 = ADVANCED_FACE ( 'NONE', ( #47158 ), #76377, .F. ) ; +#41594 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 77.92318720225496500, -28.70555803802997700 ) ) ; +#41595 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#41596 = CARTESIAN_POINT ( 'NONE', ( -17.06616028005485200, 32.00593028296454900, -28.49013149708291700 ) ) ; +#41597 = CARTESIAN_POINT ( 'NONE', ( 3.535187653983306700, 9.406791769321852600, -28.68794773163824300 ) ) ; +#41598 = CIRCLE ( 'NONE', #40850, 9.500000000000099500 ) ; +#41599 = AXIS2_PLACEMENT_3D ( 'NONE', #2342, #45847, #8595 ) ; +#41600 = ORIENTED_EDGE ( 'NONE', *, *, #80617, .F. ) ; +#41601 = EDGE_LOOP ( 'NONE', ( #35355, #11000, #63385, #25398, #7561, #68445 ) ) ; +#41602 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 39.33333333333334300, -8.133761268305512700 ) ) ; +#41603 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#41604 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41605 = ORIENTED_EDGE ( 'NONE', *, *, #64698, .F. ) ; +#41606 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41607 = CONICAL_SURFACE ( 'NONE', #46951, 10.00000000000009400, 0.7853981633974447300 ) ; +#41608 = ADVANCED_FACE ( 'NONE', ( #28750 ), #43271, .F. ) ; +#41609 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999990100, 70.79999999999967000, -28.20555803803030800 ) ) ; +#41610 = AXIS2_PLACEMENT_3D ( 'NONE', #42373, #5126, #48616 ) ; +#41611 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#41612 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609669700, 61.46283204837337200, -28.48697406221659300 ) ) ; +#41613 = CARTESIAN_POINT ( 'NONE', ( -7.092549134034167800, 57.15000000000006300, 4.783754854984829700 ) ) ; +#41614 = VERTEX_POINT ( 'NONE', #73623 ) ; +#41615 = EDGE_CURVE ( 'NONE', #167, #19662, #13859, .T. ) ; +#41616 = CIRCLE ( 'NONE', #42161, 10.50000000000009600 ) ; +#41617 = ORIENTED_EDGE ( 'NONE', *, *, #38037, .F. ) ; +#41618 = ADVANCED_FACE ( 'NONE', ( #63761 ), #10204, .F. ) ; +#41619 = CARTESIAN_POINT ( 'NONE', ( -20.24596960135924200, 7.377015206717684000, -27.21906647748533800 ) ) ; +#41620 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 75.79999999999984100, -28.70525300642875200 ) ) ; +#41621 = EDGE_LOOP ( 'NONE', ( #14829, #40588, #51779, #77925, #657 ) ) ; +#41622 = ADVANCED_FACE ( 'NONE', ( #45189 ), #57890, .F. ) ; +#41623 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41624 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650649900, 41.51912043132468700, -28.30223257055582300 ) ) ; +#41625 = CONICAL_SURFACE ( 'NONE', #36262, 10.00000000000009600, 0.7853981633974482800 ) ; +#41626 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846291900, 90.80000000000001100, -28.55171188418377800 ) ) ; +#41627 = EDGE_LOOP ( 'NONE', ( #78102, #58973, #47190, #27899 ) ) ; +#41628 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25816, #56800, #38271, #1023 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001707792749031531500 ), + .UNSPECIFIED. ) ; +#41629 = ADVANCED_FACE ( 'NONE', ( #26761 ), #24804, .F. ) ; +#41630 = CIRCLE ( 'NONE', #26578, 10.00000000000009400 ) ; +#41632 = EDGE_CURVE ( 'NONE', #47186, #41059, #80160, .T. ) ; +#41631 = ORIENTED_EDGE ( 'NONE', *, *, #69278, .F. ) ; +#41633 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571390300, 83.67681279774493000, -28.70555803803047500 ) ) ; +#41634 = EDGE_CURVE ( 'NONE', #34401, #520, #12167, .T. ) ; +#41635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41636 = ORIENTED_EDGE ( 'NONE', *, *, #38146, .T. ) ; +#41637 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 7.833333333333339300, -2.545304000185615800 ) ) ; +#41638 = EDGE_CURVE ( 'NONE', #9809, #25412, #59868, .T. ) ; +#41639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41640 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 48.00000000000000700, -1.205558038030005300 ) ) ; +#41641 = CIRCLE ( 'NONE', #38399, 10.00000000000009200 ) ; +#41642 = EDGE_CURVE ( 'NONE', #13310, #58986, #41341, .T. ) ; +#41643 = FACE_OUTER_BOUND ( 'NONE', #3024, .T. ) ; +#41644 = ORIENTED_EDGE ( 'NONE', *, *, #40099, .F. ) ; +#41645 = AXIS2_PLACEMENT_3D ( 'NONE', #70829, #33578, #77093 ) ; +#41646 = CARTESIAN_POINT ( 'NONE', ( -3.469479452198195500, 91.59999999999999400, -28.70555803803007700 ) ) ; +#41647 = ORIENTED_EDGE ( 'NONE', *, *, #59028, .F. ) ; +#41648 = ORIENTED_EDGE ( 'NONE', *, *, #59375, .T. ) ; +#41649 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 69.91070809551072800, -28.20555803803030800 ) ) ; +#41650 = ORIENTED_EDGE ( 'NONE', *, *, #65010, .T. ) ; +#41651 = EDGE_LOOP ( 'NONE', ( #35425, #60166, #71577, #74328 ) ) ; +#41652 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#41653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41654 = ORIENTED_EDGE ( 'NONE', *, *, #78857, .F. ) ; +#41655 = AXIS2_PLACEMENT_3D ( 'NONE', #74040, #18266, #61795 ) ; +#41656 = EDGE_CURVE ( 'NONE', #62098, #65275, #65715, .T. ) ; +#41657 = EDGE_CURVE ( 'NONE', #75777, #39632, #51173, .T. ) ; +#41658 = EDGE_CURVE ( 'NONE', #46181, #13039, #36757, .T. ) ; +#41659 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41660 = AXIS2_PLACEMENT_3D ( 'NONE', #12634, #74904, #37611 ) ; +#41661 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922514200, 70.09037803491438000, -28.29483400905922300 ) ) ; +#41662 = ORIENTED_EDGE ( 'NONE', *, *, #34810, .F. ) ; +#41663 = CIRCLE ( 'NONE', #31897, 10.00000000000009600 ) ; +#41664 = AXIS2_PLACEMENT_3D ( 'NONE', #57787, #20535, #64067 ) ; +#41665 = EDGE_LOOP ( 'NONE', ( #77776, #26148, #15591, #72725 ) ) ; +#41666 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873324000, 61.70803673496114800, -28.29033182162437800 ) ) ; +#41667 = ORIENTED_EDGE ( 'NONE', *, *, #7219, .T. ) ; +#41668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41669 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.29722425778843600, -28.32715733700493400 ) ) ; +#41670 = AXIS2_PLACEMENT_3D ( 'NONE', #22688, #28992, #59964 ) ; +#41671 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40693, #46936, #53212, #15964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849904600, 0.0007596411030280970400 ), + .UNSPECIFIED. ) ; +#41672 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 4.999999999999997300, 0.0000000000000000000 ) ) ; +#41673 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543711600, 90.07527064970118100, -28.39317435246134000 ) ) ; +#41674 = CIRCLE ( 'NONE', #22442, 10.50000000000009800 ) ; +#41675 = EDGE_CURVE ( 'NONE', #48835, #11374, #74449, .T. ) ; +#41676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41677 = AXIS2_PLACEMENT_3D ( 'NONE', #54247, #17007, #60543 ) ; +#41678 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#41679 = AXIS2_PLACEMENT_3D ( 'NONE', #5199, #48687, #11477 ) ; +#41680 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784445100, 55.79999999999974800, -28.20555803803014400 ) ) ; +#41681 = ORIENTED_EDGE ( 'NONE', *, *, #62931, .T. ) ; +#41682 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899343600, 49.12363993080086300, -28.38670679782169500 ) ) ; +#41683 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 61.62753447840886900, -28.38801640354855800 ) ) ; +#41684 = CARTESIAN_POINT ( 'NONE', ( -11.56194429656799700, 49.61613305479826900, -28.57723854182876300 ) ) ; +#41685 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#41686 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41687 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880593300, 13.42896305882235100, -28.53160243214824000 ) ) ; +#41688 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042476300, 27.50972971738994100, -28.70555803802994500 ) ) ; +#41689 = FACE_OUTER_BOUND ( 'NONE', #40025, .T. ) ; +#41690 = ORIENTED_EDGE ( 'NONE', *, *, #44325, .T. ) ; +#41691 = ORIENTED_EDGE ( 'NONE', *, *, #11042, .F. ) ; +#41692 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825238600, 61.43945992495532900, -28.34042301926881200 ) ) ; +#41693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41694 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714270500, 53.67681279774500800, -28.70555803802997700 ) ) ; +#41695 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003400, 90.24722181384551300, -28.70555803803016200 ) ) ; +#41696 = CARTESIAN_POINT ( 'NONE', ( -1.899522206194603800E-013, 84.37738371066706100, -28.70555803802997700 ) ) ; +#41697 = AXIS2_PLACEMENT_3D ( 'NONE', #37719, #43960, #75018 ) ; +#41698 = CIRCLE ( 'NONE', #57762, 10.50000000000009600 ) ; +#41699 = CONICAL_SURFACE ( 'NONE', #27063, 10.00000000000009400, 0.7853981633974447300 ) ; +#41700 = ORIENTED_EDGE ( 'NONE', *, *, #7655, .T. ) ; +#41701 = ORIENTED_EDGE ( 'NONE', *, *, #64164, .T. ) ; +#41702 = ADVANCED_FACE ( 'NONE', ( #72503 ), #70516, .F. ) ; +#41703 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 54.00000000000000700, -9.205558038030005700 ) ) ; +#41704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41705 = AXIS2_PLACEMENT_3D ( 'NONE', #35003, #16745, #41492 ) ; +#41706 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 85.67652461702002100, -28.70555803802997700 ) ) ; +#41707 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 73.65857157145660500, -28.20555803803030800 ) ) ; +#41708 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18679, #62199, #68449, #31204 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0007303759720927721800 ), + .UNSPECIFIED. ) ; +#41709 = ADVANCED_FACE ( 'NONE', ( #8210 ), #37409, .T. ) ; +#41710 = EDGE_CURVE ( 'NONE', #36965, #77030, #53970, .T. ) ; +#41711 = FACE_OUTER_BOUND ( 'NONE', #16408, .T. ) ; +#41712 = EDGE_LOOP ( 'NONE', ( #13017, #9498, #59634, #20764, #45575 ) ) ; +#41713 = FACE_OUTER_BOUND ( 'NONE', #8396, .T. ) ; +#41714 = VERTEX_POINT ( 'NONE', #6667 ) ; +#41715 = ORIENTED_EDGE ( 'NONE', *, *, #63235, .T. ) ; +#41716 = AXIS2_PLACEMENT_3D ( 'NONE', #79433, #23688, #10897 ) ; +#41717 = VERTEX_POINT ( 'NONE', #74955 ) ; +#41718 = CARTESIAN_POINT ( 'NONE', ( -3.778842085587705000, 9.935236322205881300, -28.30315276798563700 ) ) ; +#41719 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41530, #47765, #66560, #29350 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215342219900E-007, 0.0007606633682806951800 ), + .UNSPECIFIED. ) ; +#41720 = FACE_OUTER_BOUND ( 'NONE', #31060, .T. ) ; +#41721 = ORIENTED_EDGE ( 'NONE', *, *, #3994, .T. ) ; +#41722 = ORIENTED_EDGE ( 'NONE', *, *, #73560, .T. ) ; +#41723 = ORIENTED_EDGE ( 'NONE', *, *, #14637, .F. ) ; +#41724 = ORIENTED_EDGE ( 'NONE', *, *, #53116, .T. ) ; +#41725 = ORIENTED_EDGE ( 'NONE', *, *, #77042, .T. ) ; +#41726 = CARTESIAN_POINT ( 'NONE', ( 17.22125914545566500, 49.66476764525111800, -28.30311733712048600 ) ) ; +#41727 = ORIENTED_EDGE ( 'NONE', *, *, #3750, .F. ) ; +#41728 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6317, #12052, #56082, #18830 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446631793300E-007, 0.0002745498510224810200 ), + .UNSPECIFIED. ) ; +#41729 = ORIENTED_EDGE ( 'NONE', *, *, #40275, .F. ) ; +#41730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41731 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 18.24722181384548500, -28.70555803803013400 ) ) ; +#41732 = ADVANCED_FACE ( 'NONE', ( #30672 ), #68587, .F. ) ; +#41733 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#41734 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 25.33333333333334300, 8.320721403598817300 ) ) ; +#41735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14101, #63889, #1818, #45325 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679645139318900E-007, 0.0007596411030281898500 ), + .UNSPECIFIED. ) ; +#41736 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 35.98096581827316200, -28.69431509262337300 ) ) ; +#41737 = CONICAL_SURFACE ( 'NONE', #50552, 10.00000000000009200, 0.7853981633974447300 ) ; +#41738 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999500, 79.98922577050314000, -28.37255355648661500 ) ) ; +#41739 = EDGE_CURVE ( 'NONE', #53345, #13443, #22321, .T. ) ; +#41740 = ORIENTED_EDGE ( 'NONE', *, *, #63996, .F. ) ; +#41741 = ORIENTED_EDGE ( 'NONE', *, *, #71026, .F. ) ; +#41742 = ORIENTED_EDGE ( 'NONE', *, *, #55933, .T. ) ; +#41743 = EDGE_CURVE ( 'NONE', #41201, #65068, #55922, .T. ) ; +#41744 = CARTESIAN_POINT ( 'NONE', ( 16.63912857669165700, 40.14521310961718100, -28.57032374330296400 ) ) ; +#41745 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#41746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41747 = CONICAL_SURFACE ( 'NONE', #32791, 10.50000000000009600, 0.7853981633974500600 ) ; +#41748 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41749 = ORIENTED_EDGE ( 'NONE', *, *, #66826, .T. ) ; +#41750 = EDGE_CURVE ( 'NONE', #40146, #43413, #39369, .T. ) ; +#41751 = ORIENTED_EDGE ( 'NONE', *, *, #33925, .T. ) ; +#41752 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510346100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#41753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41754 = EDGE_CURVE ( 'NONE', #76201, #79252, #7828, .T. ) ; +#41755 = AXIS2_PLACEMENT_3D ( 'NONE', #3463, #46968, #9743 ) ; +#41756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41757 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 59.83333333333333600, -2.545304000185615800 ) ) ; +#41758 = EDGE_CURVE ( 'NONE', #8161, #31509, #20909, .T. ) ; +#41759 = CIRCLE ( 'NONE', #41599, 10.00000000000009400 ) ; +#41760 = CARTESIAN_POINT ( 'NONE', ( 24.71750510785809100, 5.141247446071049300, -21.14446223635258800 ) ) ; +#41761 = ORIENTED_EDGE ( 'NONE', *, *, #29096, .F. ) ; +#41762 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41763 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41764 = ORIENTED_EDGE ( 'NONE', *, *, #54499, .T. ) ; +#41765 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091592300, 43.07425125164785100, -28.70555803803001600 ) ) ; +#41766 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686900, 20.67701665379241400, -28.20555803802994200 ) ) ; +#41767 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526945700, 61.58737389638820000, -28.29936525552472700 ) ) ; +#41768 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41769 = AXIS2_PLACEMENT_3D ( 'NONE', #13684, #57177, #19926 ) ; +#41770 = CARTESIAN_POINT ( 'NONE', ( -2.530136888809774400, 9.146957350529797600, -28.66910751791843700 ) ) ; +#41771 = EDGE_CURVE ( 'NONE', #29731, #55249, #4346, .T. ) ; +#41772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41773 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59754, #72004, #9699, #22484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691951796700E-007, 0.0008724363063894229300 ), + .UNSPECIFIED. ) ; +#41774 = EDGE_CURVE ( 'NONE', #77015, #49270, #22852, .T. ) ; +#41775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41776 = EDGE_CURVE ( 'NONE', #50416, #15131, #74200, .T. ) ; +#41777 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515429700, 80.58127875436079500, -28.53757464917570300 ) ) ; +#41778 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#41779 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 61.46283204837340000, -28.48697406221667400 ) ) ; +#41780 = AXIS2_PLACEMENT_3D ( 'NONE', #58158, #20914, #64453 ) ; +#41781 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41782 = CONICAL_SURFACE ( 'NONE', #49864, 10.50000000000009600, 0.7853981633974500600 ) ; +#41783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41784 = FACE_OUTER_BOUND ( 'NONE', #53846, .T. ) ; +#41785 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385159400, 10.10677350908837900, -28.30799595738898200 ) ) ; +#41786 = VERTEX_POINT ( 'NONE', #57254 ) ; +#41787 = CARTESIAN_POINT ( 'NONE', ( 3.556183125752454500E-014, 53.65857157145704500, -28.20555803802997700 ) ) ; +#41788 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 17.63176086632794400, -28.70555803802992800 ) ) ; +#41789 = EDGE_CURVE ( 'NONE', #34405, #46838, #59731, .T. ) ; +#41790 = CARTESIAN_POINT ( 'NONE', ( -10.63950292779718200, 20.43250300240229600, -28.25438406275897000 ) ) ; +#41791 = AXIS2_PLACEMENT_3D ( 'NONE', #61541, #67777, #55241 ) ; +#41792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41793 = ORIENTED_EDGE ( 'NONE', *, *, #64563, .T. ) ; +#41794 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#41795 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510340700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#41796 = ADVANCED_FACE ( 'NONE', ( #6297 ), #33528, .F. ) ; +#41797 = CONICAL_SURFACE ( 'NONE', #10208, 10.00000000000009200, 0.7853981633974447300 ) ; +#41798 = VERTEX_POINT ( 'NONE', #26543 ) ; +#41799 = CIRCLE ( 'NONE', #11456, 9.500000000000099500 ) ; +#41800 = ORIENTED_EDGE ( 'NONE', *, *, #55009, .F. ) ; +#41801 = ORIENTED_EDGE ( 'NONE', *, *, #8743, .F. ) ; +#41802 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#41803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41804 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567148300, 49.85339758437810100, -28.20555803802996700 ) ) ; +#41805 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 66.16666666666670000, -4.152999154772358800 ) ) ; +#41806 = FACE_OUTER_BOUND ( 'NONE', #46185, .T. ) ; +#41807 = ORIENTED_EDGE ( 'NONE', *, *, #30273, .T. ) ; +#41808 = ORIENTED_EDGE ( 'NONE', *, *, #22121, .T. ) ; +#41809 = ORIENTED_EDGE ( 'NONE', *, *, #10185, .F. ) ; +#41810 = ORIENTED_EDGE ( 'NONE', *, *, #78919, .F. ) ; +#41812 = ORIENTED_EDGE ( 'NONE', *, *, #65392, .F. ) ; +#41811 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434400, 33.16464174796073600, -28.53896444442200300 ) ) ; +#41813 = ORIENTED_EDGE ( 'NONE', *, *, #68208, .F. ) ; +#41814 = ADVANCED_FACE ( 'NONE', ( #35507 ), #425, .T. ) ; +#41815 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 31.33333333333334300, 1.294441961969997200 ) ) ; +#41816 = AXIS2_PLACEMENT_3D ( 'NONE', #50046, #56337, #31352 ) ; +#41817 = ORIENTED_EDGE ( 'NONE', *, *, #50323, .T. ) ; +#41818 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41819 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169300, 61.25732391202397100, -28.20555803802997700 ) ) ; +#41820 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, -3.666666666666665200, 2.794441961969998300 ) ) ; +#41821 = AXIS2_PLACEMENT_3D ( 'NONE', #23917, #24175, #17909 ) ; +#41822 = ORIENTED_EDGE ( 'NONE', *, *, #67755, .F. ) ; +#41823 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41824 = FACE_OUTER_BOUND ( 'NONE', #74538, .T. ) ; +#41825 = ORIENTED_EDGE ( 'NONE', *, *, #7330, .F. ) ; +#41826 = CARTESIAN_POINT ( 'NONE', ( -8.833022223998323600, 44.45000000000160200, -3.920423194057786300 ) ) ; +#41827 = ORIENTED_EDGE ( 'NONE', *, *, #5695, .F. ) ; +#41828 = EDGE_CURVE ( 'NONE', #28113, #45025, #51982, .T. ) ; +#41829 = ORIENTED_EDGE ( 'NONE', *, *, #32639, .T. ) ; +#41830 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 33.66666666666667900, -10.73183747965883100 ) ) ; +#41831 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465425300, 19.60079448659600100, -28.70555803802994200 ) ) ; +#41832 = AXIS2_PLACEMENT_3D ( 'NONE', #58006, #20748, #64294 ) ; +#41833 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 9.932503002402294000, -28.20555803802994200 ) ) ; +#41834 = FACE_OUTER_BOUND ( 'NONE', #1523, .T. ) ; +#41835 = AXIS2_PLACEMENT_3D ( 'NONE', #17150, #60681, #23401 ) ; +#41836 = ORIENTED_EDGE ( 'NONE', *, *, #63622, .T. ) ; +#41837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41839 = ORIENTED_EDGE ( 'NONE', *, *, #35939, .F. ) ; +#41838 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571894200, 80.07141756547886800, -28.70555803803014400 ) ) ; +#41840 = ADVANCED_FACE ( 'NONE', ( #18934 ), #31603, .T. ) ; +#41841 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 73.65857157145704500, -28.20555803803014400 ) ) ; +#41842 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57664, #20421, #76422, #39147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193417692100, 0.001049055495481418000 ), + .UNSPECIFIED. ) ; +#41844 = CARTESIAN_POINT ( 'NONE', ( 23.13814640700119100, 5.930985928104633800, -24.52008349904052800 ) ) ; +#41845 = AXIS2_PLACEMENT_3D ( 'NONE', #47998, #16768, #23289 ) ; +#41846 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 35.05000000000000400, -28.20555803802995200 ) ) ; +#41847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41848 = CONICAL_SURFACE ( 'NONE', #68652, 10.00000000000009600, 0.7853981633974482800 ) ; +#41849 = VERTEX_POINT ( 'NONE', #70288 ) ; +#41850 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.36203212531319200, -28.38801640354855800 ) ) ; +#41851 = ORIENTED_EDGE ( 'NONE', *, *, #18557, .T. ) ; +#41852 = CARTESIAN_POINT ( 'NONE', ( 19.91929456216016400, 101.4388464938722600, -20.51246260165573100 ) ) ; +#41853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41854 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41855 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002700, 33.49926474563215400, -28.70555803802996700 ) ) ; +#41856 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#41857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26595, #63846, #45278, #8043 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989777896700E-007, 0.0002930330874876893500 ), + .UNSPECIFIED. ) ; +#41858 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#41859 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41860 = CARTESIAN_POINT ( 'NONE', ( 3.572261083207513000, 8.799999999999668500, -28.63329695482266100 ) ) ; +#41861 = EDGE_CURVE ( 'NONE', #47046, #27788, #45194, .T. ) ; +#41862 = FACE_OUTER_BOUND ( 'NONE', #26323, .T. ) ; +#41863 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 37.16666666666670000, 6.794441961969992500 ) ) ; +#41864 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#41865 = EDGE_CURVE ( 'NONE', #44569, #21983, #30807, .T. ) ; +#41866 = ORIENTED_EDGE ( 'NONE', *, *, #70009, .F. ) ; +#41867 = ORIENTED_EDGE ( 'NONE', *, *, #77179, .T. ) ; +#41868 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609213600, 25.18533208989798700, -28.53910738522639400 ) ) ; +#41869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41870 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707825200, 61.66410593583272300, -28.68054222049971700 ) ) ; +#41871 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#41872 = CARTESIAN_POINT ( 'NONE', ( -9.430452032917330000, 57.15000000000001300, -2.119922725009879500 ) ) ; +#41873 = EDGE_CURVE ( 'NONE', #19850, #55826, #16343, .T. ) ; +#41874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41875 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #732, #75278, #19238, #44220 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.137242331171593000E-017, 0.001492013864175121400 ), + .UNSPECIFIED. ) ; +#41876 = CYLINDRICAL_SURFACE ( 'NONE', #48180, 10.00000000000000000 ) ; +#41877 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#41878 = ORIENTED_EDGE ( 'NONE', *, *, #35129, .T. ) ; +#41879 = ORIENTED_EDGE ( 'NONE', *, *, #34624, .F. ) ; +#41880 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41881 = EDGE_CURVE ( 'NONE', #43125, #39394, #1836, .T. ) ; +#41882 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#41883 = EDGE_CURVE ( 'NONE', #61816, #29238, #16996, .T. ) ; +#41884 = ORIENTED_EDGE ( 'NONE', *, *, #63708, .F. ) ; +#41885 = CIRCLE ( 'NONE', #58948, 10.00000000000009200 ) ; +#41886 = ORIENTED_EDGE ( 'NONE', *, *, #18661, .T. ) ; +#41887 = CARTESIAN_POINT ( 'NONE', ( -23.51769053823900200, 5.741401165178896100, -23.97634926787605600 ) ) ; +#41888 = ORIENTED_EDGE ( 'NONE', *, *, #60, .T. ) ; +#41889 = ORIENTED_EDGE ( 'NONE', *, *, #50671, .F. ) ; +#41890 = ORIENTED_EDGE ( 'NONE', *, *, #80166, .F. ) ; +#41891 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41892 = ORIENTED_EDGE ( 'NONE', *, *, #73446, .T. ) ; +#41893 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#41894 = AXIS2_PLACEMENT_3D ( 'NONE', #29410, #4329, #78897 ) ; +#41895 = EDGE_CURVE ( 'NONE', #31448, #76162, #68178, .T. ) ; +#41896 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#41897 = EDGE_CURVE ( 'NONE', #73156, #23991, #53715, .T. ) ; +#41898 = EDGE_CURVE ( 'NONE', #34438, #36928, #64713, .T. ) ; +#41899 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844502500, 55.80000000000000400, -28.20555803802997700 ) ) ; +#41900 = ADVANCED_FACE ( 'NONE', ( #2372 ), #79284, .T. ) ; +#41901 = CONICAL_SURFACE ( 'NONE', #51508, 10.50000000000009600, 0.7853981633974518300 ) ; +#41902 = AXIS2_PLACEMENT_3D ( 'NONE', #67660, #30424, #73933 ) ; +#41903 = ORIENTED_EDGE ( 'NONE', *, *, #8972, .T. ) ; +#41904 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 21.97376207875058900, -28.70555803802995200 ) ) ; +#41905 = EDGE_LOOP ( 'NONE', ( #34972, #19471, #65575 ) ) ; +#41906 = ORIENTED_EDGE ( 'NONE', *, *, #37490, .T. ) ; +#41907 = ORIENTED_EDGE ( 'NONE', *, *, #41427, .T. ) ; +#41908 = ORIENTED_EDGE ( 'NONE', *, *, #77057, .T. ) ; +#41909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41910 = CIRCLE ( 'NONE', #45117, 10.50000000000009600 ) ; +#41911 = ADVANCED_FACE ( 'NONE', ( #66642 ), #13112, .F. ) ; +#41912 = AXIS2_PLACEMENT_3D ( 'NONE', #54602, #17347, #60885 ) ; +#41913 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 5.666666666666683800, 1.294441961969997200 ) ) ; +#41914 = AXIS2_PLACEMENT_3D ( 'NONE', #25938, #63197, #7128 ) ; +#41915 = EDGE_LOOP ( 'NONE', ( #62658, #50862, #32013, #11584 ) ) ; +#41916 = AXIS2_PLACEMENT_3D ( 'NONE', #8545, #52046, #14823 ) ; +#41917 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#41918 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28121, #22110, #40859, #3583 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560432900, 0.003631405919786738400 ), + .UNSPECIFIED. ) ; +#41919 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 45.83333333333335000, 0.9380355014189731800 ) ) ; +#41920 = ORIENTED_EDGE ( 'NONE', *, *, #79027, .T. ) ; +#41921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#41922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41923 = FACE_OUTER_BOUND ( 'NONE', #77458, .T. ) ; +#41925 = ORIENTED_EDGE ( 'NONE', *, *, #41897, .T. ) ; +#41924 = ADVANCED_FACE ( 'NONE', ( #48100 ), #60795, .F. ) ; +#41926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41927 = CARTESIAN_POINT ( 'NONE', ( -1.899882735204321500, 45.54999999999999700, -28.53808257741935300 ) ) ; +#41928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41929 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627436400, 36.93535825203924400, -28.53896444442200000 ) ) ; +#41930 = AXIS2_PLACEMENT_3D ( 'NONE', #48355, #29645, #42100 ) ; +#41931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41932 = EDGE_CURVE ( 'NONE', #5138, #70054, #39233, .T. ) ; +#41933 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853330100, 20.79130857014966700, -28.37223374938520600 ) ) ; +#41934 = ADVANCED_FACE ( 'NONE', ( #50038 ), #52584, .T. ) ; +#41935 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973396100, 64.26498457889741200, -28.70555803803002000 ) ) ; +#41936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41938 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#41939 = EDGE_CURVE ( 'NONE', #72943, #57507, #24809, .T. ) ; +#41940 = EDGE_LOOP ( 'NONE', ( #24757, #43584, #66230 ) ) ; +#41941 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823698900, 27.69543746431598000, -28.61277292027076100 ) ) ; +#41942 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#41943 = EDGE_LOOP ( 'NONE', ( #31459, #55060, #33405, #19601 ) ) ; +#41944 = AXIS2_PLACEMENT_3D ( 'NONE', #10515, #54017, #16769 ) ; +#41945 = ORIENTED_EDGE ( 'NONE', *, *, #6389, .F. ) ; +#41946 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#41948 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41949 = CARTESIAN_POINT ( 'NONE', ( 1.040834085586084300E-014, 48.12623792124938400, -28.70555803802996700 ) ) ; +#41950 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027408800, 79.37488905616160700, -28.55192314908416100 ) ) ; +#41951 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#41952 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6990, #44218, #19526, #63048 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005783220423748002300, 0.006247607834333972200 ), + .UNSPECIFIED. ) ; +#41953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41954 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41955 = FACE_OUTER_BOUND ( 'NONE', #67263, .T. ) ; +#41956 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390808600, 25.18533208989815400, -28.53910738522647600 ) ) ; +#41957 = EDGE_LOOP ( 'NONE', ( #10386, #62770, #46109 ) ) ; +#41958 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41959 = AXIS2_PLACEMENT_3D ( 'NONE', #3426, #34736, #22211 ) ; +#41960 = ORIENTED_EDGE ( 'NONE', *, *, #57733, .T. ) ; +#41961 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555570100, 61.87833896172684700, -28.53892303408239400 ) ) ; +#41962 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466628200, 29.33106028708539300, -28.57333386111660200 ) ) ; +#41963 = CONICAL_SURFACE ( 'NONE', #21911, 10.50000000000009600, 0.7853981633974500600 ) ; +#41964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72384, #28893, #78637, #41342 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726972946900, 0.0008135742306947157900 ), + .UNSPECIFIED. ) ; +#41965 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.54999999999999700, -28.20555803802994200 ) ) ; +#41966 = ORIENTED_EDGE ( 'NONE', *, *, #50053, .T. ) ; +#41968 = ORIENTED_EDGE ( 'NONE', *, *, #50443, .T. ) ; +#41967 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462829400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#41969 = EDGE_LOOP ( 'NONE', ( #22783, #46357, #72454, #10946 ) ) ; +#41970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41971 = VERTEX_POINT ( 'NONE', #21880 ) ; +#41972 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729962200, 70.01262610361082700, -28.29936525552474400 ) ) ; +#41973 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285725100, 43.67681279774500800, -28.70555803802997700 ) ) ; +#41974 = AXIS2_PLACEMENT_3D ( 'NONE', #24151, #42887, #80174 ) ; +#41975 = FACE_OUTER_BOUND ( 'NONE', #44902, .T. ) ; +#41976 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388100, 20.43650294695131500, -28.30782889147481300 ) ) ; +#41977 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#41978 = ORIENTED_EDGE ( 'NONE', *, *, #53184, .T. ) ; +#41979 = CYLINDRICAL_SURFACE ( 'NONE', #64565, 10.00000000000000200 ) ; +#41980 = EDGE_CURVE ( 'NONE', #38695, #68330, #46146, .T. ) ; +#41981 = VERTEX_POINT ( 'NONE', #40628 ) ; +#41982 = EDGE_LOOP ( 'NONE', ( #37348, #70404, #57429 ) ) ; +#41983 = ORIENTED_EDGE ( 'NONE', *, *, #3518, .T. ) ; +#41984 = EDGE_LOOP ( 'NONE', ( #28931, #23728, #14255, #73382 ) ) ; +#41985 = CONICAL_SURFACE ( 'NONE', #20641, 10.50000000000009600, 0.7853981633974500600 ) ; +#41986 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 51.83333333333330700, 6.794441961969992500 ) ) ; +#41987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41988 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658264100, 60.15151454780964000, -28.67627428870436600 ) ) ; +#41989 = ADVANCED_FACE ( 'NONE', ( #77313 ), #75375, .T. ) ; +#41990 = ORIENTED_EDGE ( 'NONE', *, *, #30271, .T. ) ; +#41991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#41992 = EDGE_CURVE ( 'NONE', #47186, #10425, #11159, .T. ) ; +#41993 = EDGE_CURVE ( 'NONE', #59886, #80780, #15035, .T. ) ; +#41994 = CIRCLE ( 'NONE', #44529, 10.00000000000009200 ) ; +#41995 = VERTEX_POINT ( 'NONE', #65945 ) ; +#41996 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41997 = ADVANCED_FACE ( 'NONE', ( #27709 ), #9155, .F. ) ; +#41998 = EDGE_CURVE ( 'NONE', #28330, #20495, #10346, .T. ) ; +#41999 = EDGE_CURVE ( 'NONE', #78730, #55213, #76642, .T. ) ; +#42000 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1299, #75826, #20095, #63620 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565737084354300E-007, 0.0002592140922085876800 ), + .UNSPECIFIED. ) ; +#42001 = CARTESIAN_POINT ( 'NONE', ( 1.783306465195850800, 60.79999999999998300, -28.32841359973437900 ) ) ; +#42002 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 23.16666666666667100, -12.20555803803000000 ) ) ; +#42003 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42004 = EDGE_CURVE ( 'NONE', #25364, #16445, #25757, .T. ) ; +#42005 = AXIS2_PLACEMENT_3D ( 'NONE', #31951, #75462, #38167 ) ; +#42006 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343285500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#42007 = ADVANCED_FACE ( 'NONE', ( #29673 ), #40307, .T. ) ; +#42008 = ORIENTED_EDGE ( 'NONE', *, *, #32598, .F. ) ; +#42009 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#42010 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047300, 80.23237991241894900, -28.26633708900912700 ) ) ; +#42012 = ORIENTED_EDGE ( 'NONE', *, *, #65525, .F. ) ; +#42011 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42013 = AXIS2_PLACEMENT_3D ( 'NONE', #78148, #22383, #40871 ) ; +#42014 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#42015 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #6422, #37397 ) ; +#42016 = ADVANCED_FACE ( 'NONE', ( #73434 ), #7208, .F. ) ; +#42017 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 101.5999999999999900, -18.70555803803001300 ) ) ; +#42018 = FACE_OUTER_BOUND ( 'NONE', #66492, .T. ) ; +#42019 = ORIENTED_EDGE ( 'NONE', *, *, #25585, .T. ) ; +#42020 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145308500, 81.86801718796490900, -28.34169759783703300 ) ) ; +#42021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42022 = VERTEX_POINT ( 'NONE', #41688 ) ; +#42023 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 57.66666666666667900, 1.294441961969997200 ) ) ; +#42024 = CARTESIAN_POINT ( 'NONE', ( 18.90615055831641900, 2.187698883366193200, -24.97820584213105000 ) ) ; +#42025 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#42026 = VERTEX_POINT ( 'NONE', #4440 ) ; +#42027 = CONICAL_SURFACE ( 'NONE', #18221, 10.50000000000009400, 0.7853981633974500600 ) ; +#42028 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#42029 = ORIENTED_EDGE ( 'NONE', *, *, #70745, .T. ) ; +#42030 = ORIENTED_EDGE ( 'NONE', *, *, #47559, .F. ) ; +#42031 = ORIENTED_EDGE ( 'NONE', *, *, #9650, .T. ) ; +#42032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42034 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002500, 20.06914835874664500, -28.45573375118225100 ) ) ; +#42035 = AXIS2_PLACEMENT_3D ( 'NONE', #65352, #71850, #34585 ) ; +#42036 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11106, #23614, #29902, #73388 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925647719200E-007, 0.0004084731003435384000 ), + .UNSPECIFIED. ) ; +#42037 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469300, 14.05000000000000600, -28.20555803802992800 ) ) ; +#42038 = EDGE_CURVE ( 'NONE', #15003, #6607, #62209, .T. ) ; +#42039 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#42040 = FACE_OUTER_BOUND ( 'NONE', #11635, .T. ) ; +#42041 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465800, 20.49769010897087200, -28.61774594594332300 ) ) ; +#42042 = ORIENTED_EDGE ( 'NONE', *, *, #30243, .F. ) ; +#42043 = ORIENTED_EDGE ( 'NONE', *, *, #4113, .F. ) ; +#42044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42045 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725272000, 14.36787096422365600, -28.37244029424735800 ) ) ; +#42046 = FACE_OUTER_BOUND ( 'NONE', #678, .T. ) ; +#42047 = EDGE_LOOP ( 'NONE', ( #5276, #45634, #66805, #16623 ) ) ; +#42048 = CARTESIAN_POINT ( 'NONE', ( -3.242975574465505300, 60.16517473503391500, -28.29551658696704300 ) ) ; +#42049 = EDGE_CURVE ( 'NONE', #59962, #12868, #47698, .T. ) ; +#42050 = ORIENTED_EDGE ( 'NONE', *, *, #50651, .F. ) ; +#42051 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31777, #38000, #56777, #19534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884726000 ), + .UNSPECIFIED. ) ; +#42052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42053 = AXIS2_PLACEMENT_3D ( 'NONE', #15181, #58699, #21462 ) ; +#42054 = ORIENTED_EDGE ( 'NONE', *, *, #18008, .F. ) ; +#42055 = ORIENTED_EDGE ( 'NONE', *, *, #63972, .F. ) ; +#42056 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 88.62623792124939800, -28.70555803802997700 ) ) ; +#42057 = CONICAL_SURFACE ( 'NONE', #73679, 10.00000000000009400, 0.7853981633974447300 ) ; +#42058 = ORIENTED_EDGE ( 'NONE', *, *, #76570, .T. ) ; +#42059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42060 = CONICAL_SURFACE ( 'NONE', #12789, 10.00000000000009600, 0.7853981633974447300 ) ; +#42061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42062 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650641000, 39.08087956867520100, -28.30223257055573800 ) ) ; +#42063 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042484800, 21.59027028261001400, -28.70555803802993500 ) ) ; +#42064 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 60.34267608797551900, -28.20555803803047800 ) ) ; +#42065 = ORIENTED_EDGE ( 'NONE', *, *, #53439, .T. ) ; +#42066 = AXIS2_PLACEMENT_3D ( 'NONE', #22407, #65935, #28708 ) ; +#42067 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#42068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42069 = CONICAL_SURFACE ( 'NONE', #11729, 10.50000000000009600, 0.7853981633974500600 ) ; +#42070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42071 = ORIENTED_EDGE ( 'NONE', *, *, #55933, .F. ) ; +#42072 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 64.00000000000000000, -1.205558038030002800 ) ) ; +#42073 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 29.16666666666667100, -2.545304000185620600 ) ) ; +#42074 = AXIS2_PLACEMENT_3D ( 'NONE', #3866, #53652, #41147 ) ; +#42075 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857190500, 70.07141756547869700, -28.70555803803030800 ) ) ; +#42076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42077 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21754, #59003, #34258, #77761 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397651526200E-007, 0.0003301092607750790300 ), + .UNSPECIFIED. ) ; +#42078 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42079 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#42080 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194922800, 86.76150692817462600, -28.68631150211662400 ) ) ; +#42081 = CARTESIAN_POINT ( 'NONE', ( -7.790732658306470000, 44.45000000000001000, 2.613803906213195500 ) ) ; +#42082 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 31.50000000000001400, 6.847000845227646500 ) ) ; +#42083 = ORIENTED_EDGE ( 'NONE', *, *, #43404, .T. ) ; +#42084 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285726000, 33.17681279774500100, -28.70555803802996700 ) ) ; +#42085 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42086 = ORIENTED_EDGE ( 'NONE', *, *, #2928, .F. ) ; +#42087 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 60.69966441803890000, -28.70555803802997700 ) ) ; +#42088 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#42089 = ORIENTED_EDGE ( 'NONE', *, *, #19388, .F. ) ; +#42090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42091 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 28.85339758437810400, -28.20555803802994200 ) ) ; +#42092 = CARTESIAN_POINT ( 'NONE', ( 20.47617426084837800, 7.261939586864967200, -27.07345374395258000 ) ) ; +#42093 = CIRCLE ( 'NONE', #30383, 10.50000000000009600 ) ; +#42094 = VERTEX_POINT ( 'NONE', #29508 ) ; +#42095 = CIRCLE ( 'NONE', #805, 10.50000000000009800 ) ; +#42096 = ORIENTED_EDGE ( 'NONE', *, *, #78726, .T. ) ; +#42097 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851255800, 36.00238095238064800, -28.70555803802995200 ) ) ; +#42098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42099 = CONICAL_SURFACE ( 'NONE', #39197, 10.50000000000009600, 0.7853981633974500600 ) ; +#42100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42101 = EDGE_CURVE ( 'NONE', #9399, #12694, #33269, .T. ) ; +#42102 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42103 = VERTEX_POINT ( 'NONE', #41962 ) ; +#42104 = CARTESIAN_POINT ( 'NONE', ( 19.04145683989094100, 99.68292107897944700, -24.59355936854474600 ) ) ; +#42105 = ORIENTED_EDGE ( 'NONE', *, *, #63111, .F. ) ; +#42106 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#42107 = ADVANCED_FACE ( 'NONE', ( #42251 ), #54918, .F. ) ; +#42108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42109 = EDGE_LOOP ( 'NONE', ( #7387, #5166, #18659 ) ) ; +#42110 = CONICAL_SURFACE ( 'NONE', #52997, 10.50000000000009600, 0.7853981633974500600 ) ; +#42111 = ADVANCED_FACE ( 'NONE', ( #44177 ), #73265, .T. ) ; +#42112 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#42113 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#42114 = EDGE_CURVE ( 'NONE', #55934, #49544, #56875, .T. ) ; +#42115 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42117 = ORIENTED_EDGE ( 'NONE', *, *, #44836, .T. ) ; +#42118 = AXIS2_PLACEMENT_3D ( 'NONE', #12244, #55733, #18488 ) ; +#42119 = CONICAL_SURFACE ( 'NONE', #48779, 10.00000000000009200, 0.7853981633974447300 ) ; +#42120 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 35.00000000000000000, -9.205558038030005700 ) ) ; +#42121 = ORIENTED_EDGE ( 'NONE', *, *, #69688, .T. ) ; +#42122 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666600, 81.46283204837337200, -28.48697406221659300 ) ) ; +#42123 = ORIENTED_EDGE ( 'NONE', *, *, #65533, .T. ) ; +#42124 = ORIENTED_EDGE ( 'NONE', *, *, #54648, .F. ) ; +#42125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42126 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8728, #45985, #21278, #64821 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#42127 = CIRCLE ( 'NONE', #5890, 10.50000000000009200 ) ; +#42128 = EDGE_LOOP ( 'NONE', ( #20555, #14132, #56630, #16058 ) ) ; +#42129 = CIRCLE ( 'NONE', #4898, 10.50000000000009200 ) ; +#42130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42131 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#42132 = AXIS2_PLACEMENT_3D ( 'NONE', #72723, #78979, #29244 ) ; +#42133 = CARTESIAN_POINT ( 'NONE', ( -6.009339790672191500, 57.14999999999997000, -8.557856806504609900 ) ) ; +#42134 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312635900, 65.80000000000507000, -28.70555803803014400 ) ) ; +#42135 = EDGE_CURVE ( 'NONE', #1580, #74996, #23796, .T. ) ; +#42136 = EDGE_CURVE ( 'NONE', #76613, #68291, #58809, .T. ) ; +#42137 = EDGE_LOOP ( 'NONE', ( #53549, #54140, #9181, #73395 ) ) ; +#42138 = ORIENTED_EDGE ( 'NONE', *, *, #36501, .T. ) ; +#42139 = CARTESIAN_POINT ( 'NONE', ( -23.53553390593273100, 100.1355339059327300, -23.91561187082989900 ) ) ; +#42140 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42141 = FACE_OUTER_BOUND ( 'NONE', #41905, .T. ) ; +#42142 = ORIENTED_EDGE ( 'NONE', *, *, #59049, .T. ) ; +#42143 = FACE_OUTER_BOUND ( 'NONE', #43144, .T. ) ; +#42144 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42145 = AXIS2_PLACEMENT_3D ( 'NONE', #75843, #57096, #44522 ) ; +#42146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42147 = EDGE_CURVE ( 'NONE', #7719, #5802, #18817, .T. ) ; +#42148 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285712600, 12.17681279774500100, -28.70555803802994200 ) ) ; +#42149 = AXIS2_PLACEMENT_3D ( 'NONE', #57588, #63601, #26611 ) ; +#42150 = AXIS2_PLACEMENT_3D ( 'NONE', #28495, #71989, #34716 ) ; +#42151 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533315700, 49.30869142985029900, -28.37223374938523400 ) ) ; +#42152 = VECTOR ( 'NONE', #41029, 1000.000000000000000 ) ; +#42153 = CARTESIAN_POINT ( 'NONE', ( -1.283695372222837200E-013, 15.94142842854310700, -28.20555803802992800 ) ) ; +#42154 = AXIS2_PLACEMENT_3D ( 'NONE', #58555, #21313, #64842 ) ; +#42155 = ORIENTED_EDGE ( 'NONE', *, *, #8622, .F. ) ; +#42156 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 3.500000000000007100, -4.865812075874393000 ) ) ; +#42157 = EDGE_LOOP ( 'NONE', ( #28447, #33075, #41042, #58080 ) ) ; +#42158 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33220, #70473, #45692, #8443 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668610666200E-007, 0.0003940053330070031600 ), + .UNSPECIFIED. ) ; +#42159 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 43.66666666666667100, -5.205558038030003100 ) ) ; +#42160 = FACE_OUTER_BOUND ( 'NONE', #68548, .T. ) ; +#42161 = AXIS2_PLACEMENT_3D ( 'NONE', #24439, #67943, #30693 ) ; +#42162 = EDGE_LOOP ( 'NONE', ( #21471, #70955, #34505, #47409 ) ) ; +#42163 = FACE_OUTER_BOUND ( 'NONE', #1608, .T. ) ; +#42164 = VERTEX_POINT ( 'NONE', #73799 ) ; +#42165 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61068, #48766, #18062, #61602 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674235141908000E-007, 0.0007606607323826867500 ), + .UNSPECIFIED. ) ; +#42166 = CARTESIAN_POINT ( 'NONE', ( 17.90233405035082400, 41.36492161058564700, -28.27580420063968300 ) ) ; +#42167 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000421000, 88.39962244433169800, -28.53664883431635200 ) ) ; +#42168 = ORIENTED_EDGE ( 'NONE', *, *, #64797, .F. ) ; +#42169 = CIRCLE ( 'NONE', #52177, 9.500000000000095900 ) ; +#42170 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 8.833333333333351700, 0.9380355014189731800 ) ) ; +#42171 = VERTEX_POINT ( 'NONE', #30304 ) ; +#42172 = ORIENTED_EDGE ( 'NONE', *, *, #6978, .F. ) ; +#42173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#42174 = ORIENTED_EDGE ( 'NONE', *, *, #31663, .T. ) ; +#42175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42176 = AXIS2_PLACEMENT_3D ( 'NONE', #63429, #69646, #19903 ) ; +#42177 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42178 = ADVANCED_FACE ( 'NONE', ( #62744 ), #36412, .F. ) ; +#42179 = EDGE_CURVE ( 'NONE', #24201, #20363, #4349, .T. ) ; +#42180 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58051, #20797, #27068, #70558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571436600, 0.0008043487657975154400 ), + .UNSPECIFIED. ) ; +#42182 = CIRCLE ( 'NONE', #38309, 10.00000000000009200 ) ; +#42181 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189935100, 41.97636006919911700, -28.38670679782169500 ) ) ; +#42183 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 4.999999999999997300, 16.29444196196997700 ) ) ; +#42184 = ORIENTED_EDGE ( 'NONE', *, *, #6403, .T. ) ; +#42185 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408173200, 61.21413374642160200, -28.27331438134787000 ) ) ; +#42186 = VECTOR ( 'NONE', #15424, 1000.000000000000000 ) ; +#42187 = AXIS2_PLACEMENT_3D ( 'NONE', #27329, #76800, #70807 ) ; +#42188 = ORIENTED_EDGE ( 'NONE', *, *, #68948, .T. ) ; +#42189 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42191 = VERTEX_POINT ( 'NONE', #67808 ) ; +#42192 = VERTEX_POINT ( 'NONE', #30565 ) ; +#42193 = CARTESIAN_POINT ( 'NONE', ( -11.50207502155148000, 50.60145251508603800, -28.70555803802997700 ) ) ; +#42194 = VERTEX_POINT ( 'NONE', #74071 ) ; +#42195 = ADVANCED_FACE ( 'NONE', ( #52951 ), #3311, .F. ) ; +#42196 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ; +#42197 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 41.86172549728279800, -28.47230003642276900 ) ) ; +#42198 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187867700, 89.99813478817168300, -28.24089224568490400 ) ) ; +#42199 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#42200 = ORIENTED_EDGE ( 'NONE', *, *, #80136, .T. ) ; +#42201 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42203 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 55.92347538297996600, -28.70555803802997700 ) ) ; +#42204 = VERTEX_POINT ( 'NONE', #5792 ) ; +#42205 = ORIENTED_EDGE ( 'NONE', *, *, #66687, .T. ) ; +#42206 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305486600, 51.89604671418359800, -28.70555803803002000 ) ) ; +#42207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42208 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 69.94924284854670300, -28.20555803803047800 ) ) ; +#42209 = EDGE_CURVE ( 'NONE', #53090, #47561, #38342, .T. ) ; +#42210 = CARTESIAN_POINT ( 'NONE', ( 2.716823492901023300, 49.56267502090532400, -28.41043597897456200 ) ) ; +#42211 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42212 = VERTEX_POINT ( 'NONE', #55547 ) ; +#42213 = CONICAL_SURFACE ( 'NONE', #29458, 10.50000000000009600, 0.7853981633974518300 ) ; +#42214 = EDGE_CURVE ( 'NONE', #69375, #70400, #70660, .T. ) ; +#42215 = CARTESIAN_POINT ( 'NONE', ( -15.57141974618298400, 91.19760305329420200, -28.70555803803001600 ) ) ; +#42216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17810, #11563, #48768, #24068 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003299945329126362900, 0.001108409907889961200 ), + .UNSPECIFIED. ) ; +#42218 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 77.92318720225496500, -28.70555803802997700 ) ) ; +#42219 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#42220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42221 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.418457393421045200, -28.68863412692832800 ) ) ; +#42222 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42223 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51721, #8217, #64311, #27037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799625124100E-007, 0.0005050252131287490100 ), + .UNSPECIFIED. ) ; +#42224 = EDGE_CURVE ( 'NONE', #15291, #37756, #19892, .T. ) ; +#42225 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500141900, 51.76337688193822800, -28.37223523914899900 ) ) ; +#42226 = ADVANCED_FACE ( 'NONE', ( #69507 ), #50978, .T. ) ; +#42227 = EDGE_CURVE ( 'NONE', #27463, #63706, #56192, .T. ) ; +#42228 = AXIS2_PLACEMENT_3D ( 'NONE', #63201, #38393, #44363 ) ; +#42229 = CONICAL_SURFACE ( 'NONE', #77374, 10.00000000000009200, 0.7853981633974447300 ) ; +#42230 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#42231 = ORIENTED_EDGE ( 'NONE', *, *, #6119, .F. ) ; +#42232 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 49.66666666666667900, -8.133761268305512700 ) ) ; +#42233 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841386700, 30.93650294695131500, -28.30782889147482000 ) ) ; +#42234 = AXIS2_PLACEMENT_3D ( 'NONE', #15061, #58569, #21335 ) ; +#42236 = ORIENTED_EDGE ( 'NONE', *, *, #71130, .F. ) ; +#42235 = EDGE_CURVE ( 'NONE', #78359, #38080, #41728, .T. ) ; +#42237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42238 = EDGE_CURVE ( 'NONE', #54282, #3004, #21835, .T. ) ; +#42239 = EDGE_CURVE ( 'NONE', #44986, #52097, #27310, .T. ) ; +#42241 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ; +#42240 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 47.66545993132822200, -28.70555803802999200 ) ) ; +#42242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42243 = CIRCLE ( 'NONE', #14635, 10.00000000000009400 ) ; +#42244 = ORIENTED_EDGE ( 'NONE', *, *, #80038, .T. ) ; +#42245 = FACE_OUTER_BOUND ( 'NONE', #65571, .T. ) ; +#42246 = ORIENTED_EDGE ( 'NONE', *, *, #49382, .T. ) ; +#42247 = AXIS2_PLACEMENT_3D ( 'NONE', #23780, #72755, #61056 ) ; +#42248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42249 = ORIENTED_EDGE ( 'NONE', *, *, #2475, .F. ) ; +#42250 = CONICAL_SURFACE ( 'NONE', #54228, 10.00000000000009600, 0.7853981633974447300 ) ; +#42251 = FACE_OUTER_BOUND ( 'NONE', #32032, .T. ) ; +#42252 = ORIENTED_EDGE ( 'NONE', *, *, #30610, .T. ) ; +#42253 = EDGE_LOOP ( 'NONE', ( #62921, #7704, #19100, #72391 ) ) ; +#42254 = EDGE_CURVE ( 'NONE', #47643, #47186, #5283, .T. ) ; +#42255 = EDGE_LOOP ( 'NONE', ( #41644, #45670, #7429 ) ) ; +#42256 = AXIS2_PLACEMENT_3D ( 'NONE', #55398, #18152, #61692 ) ; +#42257 = AXIS2_PLACEMENT_3D ( 'NONE', #40142, #77684, #15407 ) ; +#42258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42259 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#42260 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42261 = CARTESIAN_POINT ( 'NONE', ( -11.72090442826400800, 81.50050415885243600, -28.63287458792238000 ) ) ; +#42262 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 21.00000000000000700, 9.794441961969996100 ) ) ; +#42263 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807170800, 54.80000000000001100, -28.70555803802997700 ) ) ; +#42264 = FACE_OUTER_BOUND ( 'NONE', #63913, .T. ) ; +#42265 = VERTEX_POINT ( 'NONE', #56342 ) ; +#42266 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#42267 = CONICAL_SURFACE ( 'NONE', #41434, 10.50000000000009600, 0.7853981633974482800 ) ; +#42268 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42269 = ORIENTED_EDGE ( 'NONE', *, *, #79897, .F. ) ; +#42270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14524, #8230, #70536, #33282 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849959700, 0.007639752840043633300 ), + .UNSPECIFIED. ) ; +#42271 = VERTEX_POINT ( 'NONE', #43812 ) ; +#42272 = VERTEX_POINT ( 'NONE', #37841 ) ; +#42273 = ORIENTED_EDGE ( 'NONE', *, *, #67184, .F. ) ; +#42274 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#42275 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#42276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42277 = EDGE_LOOP ( 'NONE', ( #65298, #18182, #4369 ) ) ; +#42278 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54944, #11454, #67464, #30237 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936651500, 0.0005776948474817100400 ), + .UNSPECIFIED. ) ; +#42279 = FACE_OUTER_BOUND ( 'NONE', #78100, .T. ) ; +#42280 = AXIS2_PLACEMENT_3D ( 'NONE', #60576, #23296, #66825 ) ; +#42281 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 71.25732391202376400, -28.20555803803014400 ) ) ; +#42282 = ADVANCED_FACE ( 'NONE', ( #34493 ), #32522, .T. ) ; +#42283 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 70.90050506338789700, -28.70555803803030800 ) ) ; +#42285 = ORIENTED_EDGE ( 'NONE', *, *, #14014, .F. ) ; +#42284 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45124, #57418, #51383, #14181 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467949127230300E-007, 0.0007331043932795604400 ), + .UNSPECIFIED. ) ; +#42286 = ORIENTED_EDGE ( 'NONE', *, *, #22269, .F. ) ; +#42287 = AXIS2_PLACEMENT_3D ( 'NONE', #22582, #53587, #72380 ) ; +#42288 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 55.50000000000000700, -4.865812075874393000 ) ) ; +#42289 = ORIENTED_EDGE ( 'NONE', *, *, #59428, .T. ) ; +#42290 = CARTESIAN_POINT ( 'NONE', ( 18.94831813611647700, 6.051681863884253300, -27.98939727084393800 ) ) ; +#42291 = VERTEX_POINT ( 'NONE', #56613 ) ; +#42292 = EDGE_CURVE ( 'NONE', #22429, #47665, #65633, .T. ) ; +#42293 = CIRCLE ( 'NONE', #59073, 10.50000000000009600 ) ; +#42294 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42295 = AXIS2_PLACEMENT_3D ( 'NONE', #17900, #24161, #67674 ) ; +#42296 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 71.25732391202396300, -28.20555803802997700 ) ) ; +#42297 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116469800, 28.70564881207762300, -28.41114655922297800 ) ) ; +#42298 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42299 = ADVANCED_FACE ( 'NONE', ( #67571 ), #12848, .T. ) ; +#42300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42301 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#42302 = AXIS2_PLACEMENT_3D ( 'NONE', #38972, #1718, #45215 ) ; +#42303 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#42304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58352, #14837, #27373, #70856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989832301100E-007, 0.0002930330874877995500 ), + .UNSPECIFIED. ) ; +#42305 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#42306 = CARTESIAN_POINT ( 'NONE', ( 6.946249744008665800E-015, 26.20389005397394300, -28.37519436813180100 ) ) ; +#42307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42308 = AXIS2_PLACEMENT_3D ( 'NONE', #13398, #44585, #32138 ) ; +#42309 = CARTESIAN_POINT ( 'NONE', ( -11.51272810170980600, 61.47860083896993900, -28.56001287362840900 ) ) ; +#42310 = CONICAL_SURFACE ( 'NONE', #72595, 10.50000000000009800, 0.7853981633974500600 ) ; +#42311 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743230500, 33.16464174796072900, -28.53896444442198500 ) ) ; +#42312 = ADVANCED_FACE ( 'NONE', ( #80215 ), #30593, .T. ) ; +#42313 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.41070809551055700, -28.20555803802994200 ) ) ; +#42314 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000091500, 15.94142842854307000, -28.20555803802992800 ) ) ; +#42315 = ORIENTED_EDGE ( 'NONE', *, *, #51387, .F. ) ; +#42316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42317 = ORIENTED_EDGE ( 'NONE', *, *, #69993, .T. ) ; +#42318 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42319 = CIRCLE ( 'NONE', #48378, 10.00000000000009400 ) ; +#42320 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#42321 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 38.92298334620756600, -28.20555803802995200 ) ) ; +#42322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42324 = ORIENTED_EDGE ( 'NONE', *, *, #17371, .F. ) ; +#42323 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.23796787468679200, -28.38801640354855100 ) ) ; +#42325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46679, #3179, #15716, #59220 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978158900E-007, 0.001076778502991146800 ), + .UNSPECIFIED. ) ; +#42326 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42327 = ADVANCED_FACE ( 'NONE', ( #15985 ), #78280, .F. ) ; +#42328 = FACE_OUTER_BOUND ( 'NONE', #44501, .T. ) ; +#42329 = FACE_OUTER_BOUND ( 'NONE', #41621, .T. ) ; +#42331 = EDGE_CURVE ( 'NONE', #31113, #38778, #14032, .T. ) ; +#42330 = ORIENTED_EDGE ( 'NONE', *, *, #62432, .T. ) ; +#42332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42333 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#42334 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 61.83333333333334300, 1.741883078712340300 ) ) ; +#42335 = EDGE_CURVE ( 'NONE', #67861, #27421, #79167, .T. ) ; +#42336 = ORIENTED_EDGE ( 'NONE', *, *, #66465, .F. ) ; +#42337 = CONICAL_SURFACE ( 'NONE', #71395, 10.50000000000009600, 0.7853981633974500600 ) ; +#42338 = ORIENTED_EDGE ( 'NONE', *, *, #9981, .F. ) ; +#42339 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#42340 = VERTEX_POINT ( 'NONE', #5102 ) ; +#42341 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 27.00000000000001800, -1.205558038030002800 ) ) ; +#42342 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#42343 = EDGE_CURVE ( 'NONE', #7748, #28848, #71475, .T. ) ; +#42345 = CONICAL_SURFACE ( 'NONE', #63990, 10.50000000000009600, 0.7853981633974500600 ) ; +#42344 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#42346 = FACE_OUTER_BOUND ( 'NONE', #41627, .T. ) ; +#42347 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#42348 = ORIENTED_EDGE ( 'NONE', *, *, #69396, .F. ) ; +#42349 = EDGE_CURVE ( 'NONE', #72943, #2326, #47079, .T. ) ; +#42350 = FACE_OUTER_BOUND ( 'NONE', #21700, .T. ) ; +#42351 = EDGE_CURVE ( 'NONE', #66219, #30287, #64717, .T. ) ; +#42352 = VERTEX_POINT ( 'NONE', #30167 ) ; +#42353 = CARTESIAN_POINT ( 'NONE', ( -6.079006772786334200, 44.44999999999998900, 3.994987765673467400 ) ) ; +#42354 = ORIENTED_EDGE ( 'NONE', *, *, #2301, .F. ) ; +#42355 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 29.33333333333333900, -6.705558038030005700 ) ) ; +#42356 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#42357 = ORIENTED_EDGE ( 'NONE', *, *, #32346, .T. ) ; +#42358 = ORIENTED_EDGE ( 'NONE', *, *, #20102, .T. ) ; +#42359 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#42360 = ORIENTED_EDGE ( 'NONE', *, *, #21803, .T. ) ; +#42361 = FACE_OUTER_BOUND ( 'NONE', #36272, .T. ) ; +#42362 = EDGE_LOOP ( 'NONE', ( #56922, #25142, #57798, #37741 ) ) ; +#42363 = AXIS2_PLACEMENT_3D ( 'NONE', #76529, #39260, #2003 ) ; +#42364 = EDGE_CURVE ( 'NONE', #301, #12827, #17935, .T. ) ; +#42365 = EDGE_CURVE ( 'NONE', #27733, #39888, #50182, .T. ) ; +#42366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42367 = EDGE_CURVE ( 'NONE', #43963, #29328, #63689, .T. ) ; +#42368 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003200, 81.43250300240195800, -28.20555803803030800 ) ) ; +#42369 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#42370 = CIRCLE ( 'NONE', #20131, 10.00000000000009200 ) ; +#42371 = AXIS2_PLACEMENT_3D ( 'NONE', #23861, #30128, #61126 ) ; +#42372 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803803001300 ) ) ; +#42373 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#42374 = EDGE_LOOP ( 'NONE', ( #59024, #56628, #65238, #52156, #17487 ) ) ; +#42375 = FACE_OUTER_BOUND ( 'NONE', #36814, .T. ) ; +#42376 = CARTESIAN_POINT ( 'NONE', ( 17.83590720534615700, 97.27181549717522600, -26.94149096159431900 ) ) ; +#42377 = AXIS2_PLACEMENT_3D ( 'NONE', #51968, #14760, #58264 ) ; +#42378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42379 = AXIS2_PLACEMENT_3D ( 'NONE', #41001, #3717, #47213 ) ; +#42380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42381 = AXIS2_PLACEMENT_3D ( 'NONE', #37078, #80620, #43339 ) ; +#42382 = ADVANCED_FACE ( 'NONE', ( #49029 ), #43197, .F. ) ; +#42383 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42384 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48861, #5378, #67663, #30425 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025160000, 0.0006251342085519778300 ), + .UNSPECIFIED. ) ; +#42385 = CARTESIAN_POINT ( 'NONE', ( 15.46693852783924500, 65.79999999999982700, -28.37297418064025200 ) ) ; +#42386 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 32.83333333333335000, 6.794441961969992500 ) ) ; +#42387 = CIRCLE ( 'NONE', #4764, 10.00000000000009400 ) ; +#42388 = CARTESIAN_POINT ( 'NONE', ( -10.75702442553440700, 60.16517473503392200, -28.29551658696701800 ) ) ; +#42389 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812300, 89.60439022488337500, -28.70555803802997700 ) ) ; +#42390 = ORIENTED_EDGE ( 'NONE', *, *, #53674, .F. ) ; +#42391 = CIRCLE ( 'NONE', #53036, 10.50000000000009600 ) ; +#42392 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583926500, 30.51125751638927900, -28.53740755999535500 ) ) ; +#42393 = ADVANCED_FACE ( 'NONE', ( #28675 ), #10132, .T. ) ; +#42394 = CARTESIAN_POINT ( 'NONE', ( 17.40887775794656300, 9.679560072258787800, -28.41154406527802600 ) ) ; +#42395 = AXIS2_PLACEMENT_3D ( 'NONE', #46312, #2818, #9059 ) ; +#42396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42398 = CARTESIAN_POINT ( 'NONE', ( 2.348457372322600100, 57.15000000000000600, -10.16630690061021800 ) ) ; +#42399 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42404, #79696, #42676, #5438 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466049174257200E-007, 0.0002929914227444337400 ), + .UNSPECIFIED. ) ; +#42400 = ORIENTED_EDGE ( 'NONE', *, *, #73700, .F. ) ; +#42401 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#42402 = CIRCLE ( 'NONE', #36418, 9.500000000000099500 ) ; +#42403 = CARTESIAN_POINT ( 'NONE', ( 15.02626848327793900, 55.71754128061508700, -28.70555803803001600 ) ) ; +#42404 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180452700, 71.65075715145293600, -28.20555803802997700 ) ) ; +#42405 = CONICAL_SURFACE ( 'NONE', #16820, 10.00000000000009200, 0.7853981633974447300 ) ; +#42406 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .F. ) ; +#42407 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42408 = ADVANCED_FACE ( 'NONE', ( #61743 ), #57813, .F. ) ; +#42409 = EDGE_CURVE ( 'NONE', #43125, #36273, #74380, .T. ) ; +#42410 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35100, #16309, #41312, #4055 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203483666106700E-007, 0.0008990233139251996300 ), + .UNSPECIFIED. ) ; +#42411 = CONICAL_SURFACE ( 'NONE', #80221, 10.50000000000009800, 0.7853981633974518300 ) ; +#42412 = AXIS2_PLACEMENT_3D ( 'NONE', #7370, #50874, #13681 ) ; +#42414 = ORIENTED_EDGE ( 'NONE', *, *, #37809, .F. ) ; +#42413 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 57.60073525436789100, -28.70555803802999500 ) ) ; +#42415 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.16749699759768800, -28.20555803802995200 ) ) ; +#42416 = ORIENTED_EDGE ( 'NONE', *, *, #65776, .F. ) ; +#42417 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#42418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69720, #13731, #50922, #32459 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191467814000E-007, 0.0006649560044143968800 ), + .UNSPECIFIED. ) ; +#42419 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42420 = FACE_OUTER_BOUND ( 'NONE', #47153, .T. ) ; +#42421 = ADVANCED_FACE ( 'NONE', ( #45116 ), #9256, .F. ) ; +#42422 = CONICAL_SURFACE ( 'NONE', #39762, 10.50000000000009600, 0.7853981633974500600 ) ; +#42423 = ORIENTED_EDGE ( 'NONE', *, *, #60508, .T. ) ; +#42424 = AXIS2_PLACEMENT_3D ( 'NONE', #27131, #70618, #33364 ) ; +#42425 = ORIENTED_EDGE ( 'NONE', *, *, #76790, .F. ) ; +#42426 = VERTEX_POINT ( 'NONE', #49645 ) ; +#42427 = ORIENTED_EDGE ( 'NONE', *, *, #46390, .F. ) ; +#42428 = CIRCLE ( 'NONE', #24545, 10.50000000000009600 ) ; +#42429 = CONICAL_SURFACE ( 'NONE', #40004, 10.00000000000009200, 0.7853981633974447300 ) ; +#42430 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 1.333333333333345900, 3.124568980892187500 ) ) ; +#42431 = ORIENTED_EDGE ( 'NONE', *, *, #44540, .T. ) ; +#42432 = AXIS2_PLACEMENT_3D ( 'NONE', #2226, #70783, #69712 ) ; +#42433 = ORIENTED_EDGE ( 'NONE', *, *, #22246, .F. ) ; +#42434 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#42435 = CARTESIAN_POINT ( 'NONE', ( -8.899882735204304400, 14.05000000000000400, -28.53808257741930300 ) ) ; +#42436 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 41.49999999999998600, 4.650848422521012700 ) ) ; +#42437 = EDGE_LOOP ( 'NONE', ( #19572, #40153, #1716, #37423 ) ) ; +#42438 = FACE_OUTER_BOUND ( 'NONE', #19193, .T. ) ; +#42440 = ORIENTED_EDGE ( 'NONE', *, *, #47809, .T. ) ; +#42439 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#42441 = EDGE_CURVE ( 'NONE', #12400, #70927, #25849, .T. ) ; +#42442 = ORIENTED_EDGE ( 'NONE', *, *, #14940, .F. ) ; +#42443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42444 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42445 = CIRCLE ( 'NONE', #51654, 10.00000000000009400 ) ; +#42446 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 6.666666666666682100, -5.205558038030003100 ) ) ; +#42447 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42448 = CARTESIAN_POINT ( 'NONE', ( 17.07349692871617500, 51.37839075872538100, -28.29547734244365000 ) ) ; +#42449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42451 = ORIENTED_EDGE ( 'NONE', *, *, #15089, .T. ) ; +#42452 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21052, #52270, #40057, #2775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735935196400E-007, 0.0002745102201814187200 ), + .UNSPECIFIED. ) ; +#42453 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534587600, 18.99920551340398900, -28.70555803802992800 ) ) ; +#42454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42455 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42458 = PLANE ( 'NONE', #45614 ) ; +#42459 = EDGE_CURVE ( 'NONE', #68330, #34327, #35766, .T. ) ; +#42460 = EDGE_CURVE ( 'NONE', #13600, #52833, #59785, .T. ) ; +#42461 = VECTOR ( 'NONE', #4756, 1000.000000000000000 ) ; +#42462 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#42463 = ORIENTED_EDGE ( 'NONE', *, *, #19963, .F. ) ; +#42464 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618500, 70.79999999999967000, -28.55171188418405800 ) ) ; +#42465 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747327900, 18.13131911501848800, -28.51286550264574200 ) ) ; +#42466 = FACE_OUTER_BOUND ( 'NONE', #18640, .T. ) ; +#42467 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736721500, 14.05000000000000200, -28.70555803802992800 ) ) ; +#42468 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42469 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42470 = ORIENTED_EDGE ( 'NONE', *, *, #6617, .F. ) ; +#42471 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700200, 23.61903418172678600, -28.69431509262337700 ) ) ; +#42473 = ORIENTED_EDGE ( 'NONE', *, *, #57757, .T. ) ; +#42472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42474 = LINE ( 'NONE', #40437, #75575 ) ; +#42475 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 80.16054007504462200, -28.34042301926884400 ) ) ; +#42476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42478 = AXIS2_PLACEMENT_3D ( 'NONE', #67578, #30347, #73846 ) ; +#42479 = EDGE_CURVE ( 'NONE', #80466, #25026, #21312, .T. ) ; +#42480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42481 = EDGE_CURVE ( 'NONE', #68660, #76544, #26693, .T. ) ; +#42482 = ORIENTED_EDGE ( 'NONE', *, *, #20558, .F. ) ; +#42483 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42484 = EDGE_CURVE ( 'NONE', #4270, #18214, #6833, .T. ) ; +#42485 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42486 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42487 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42488 = EDGE_CURVE ( 'NONE', #15598, #214, #73181, .T. ) ; +#42489 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42490 = CARTESIAN_POINT ( 'NONE', ( 17.04027359854960400, 39.22437813624629400, -28.30310527599300500 ) ) ; +#42491 = CIRCLE ( 'NONE', #7690, 9.500000000000099500 ) ; +#42492 = AXIS2_PLACEMENT_3D ( 'NONE', #22314, #28615, #59593 ) ; +#42493 = CONICAL_SURFACE ( 'NONE', #17286, 10.50000000000009600, 0.7853981633974482800 ) ; +#42494 = ORIENTED_EDGE ( 'NONE', *, *, #36534, .T. ) ; +#42495 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42496 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 87.22261628933213700, -28.70555803803047500 ) ) ; +#42497 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42498 = VERTEX_POINT ( 'NONE', #709 ) ; +#42499 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#42500 = ORIENTED_EDGE ( 'NONE', *, *, #32008, .T. ) ; +#42501 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715066700, 30.82033471810042600, -28.30868034705249800 ) ) ; +#42502 = AXIS2_PLACEMENT_3D ( 'NONE', #66607, #54338, #17102 ) ; +#42503 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 11.70037755566824200, -28.53664883431606500 ) ) ; +#42504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42505 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511880600, 51.99560977511662000, -28.70555803802997700 ) ) ; +#42506 = CONICAL_SURFACE ( 'NONE', #11087, 10.50000000000009600, 0.7853981633974518300 ) ; +#42507 = ORIENTED_EDGE ( 'NONE', *, *, #2460, .F. ) ; +#42508 = ORIENTED_EDGE ( 'NONE', *, *, #38177, .F. ) ; +#42509 = VERTEX_POINT ( 'NONE', #62754 ) ; +#42510 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36392, #73691, #55163, #17916 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389900332900E-007, 0.0008082646680357318200 ), + .UNSPECIFIED. ) ; +#42511 = VERTEX_POINT ( 'NONE', #12985 ) ; +#42512 = ADVANCED_FACE ( 'NONE', ( #76293 ), #7297, .F. ) ; +#42513 = FACE_OUTER_BOUND ( 'NONE', #28115, .T. ) ; +#42514 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 47.50000000000000700, 4.650848422521016300 ) ) ; +#42515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42516 = AXIS2_PLACEMENT_3D ( 'NONE', #25898, #19907, #1107 ) ; +#42517 = ORIENTED_EDGE ( 'NONE', *, *, #33545, .T. ) ; +#42518 = EDGE_CURVE ( 'NONE', #1054, #11374, #58690, .T. ) ; +#42519 = ORIENTED_EDGE ( 'NONE', *, *, #11787, .F. ) ; +#42520 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42521 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.65857157145702400, -28.20555803802997700 ) ) ; +#42522 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#42523 = ADVANCED_FACE ( 'NONE', ( #40407 ), #12083, .T. ) ; +#42524 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298136500, 65.79999999999968500, -28.70555803803030800 ) ) ; +#42525 = FACE_OUTER_BOUND ( 'NONE', #66305, .T. ) ; +#42526 = ORIENTED_EDGE ( 'NONE', *, *, #22701, .T. ) ; +#42527 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42528 = EDGE_CURVE ( 'NONE', #49674, #24258, #44181, .T. ) ; +#42529 = EDGE_LOOP ( 'NONE', ( #39067, #72569, #52482 ) ) ; +#42530 = FACE_OUTER_BOUND ( 'NONE', #58055, .T. ) ; +#42531 = AXIS2_PLACEMENT_3D ( 'NONE', #10441, #41435, #47663 ) ; +#42532 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42533 = FACE_OUTER_BOUND ( 'NONE', #2229, .T. ) ; +#42534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42535 = ORIENTED_EDGE ( 'NONE', *, *, #11229, .T. ) ; +#42536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34830, #16040, #16321, #59847 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190671804200E-007, 0.0006649560044141378600 ), + .UNSPECIFIED. ) ; +#42537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42538 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42539 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 18.83333333333333900, -12.20555803803000600 ) ) ; +#42540 = AXIS2_PLACEMENT_3D ( 'NONE', #44512, #63353, #1026 ) ; +#42541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42542 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567142500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#42543 = CIRCLE ( 'NONE', #9912, 9.500000000000097700 ) ; +#42544 = ORIENTED_EDGE ( 'NONE', *, *, #50800, .F. ) ; +#42545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42546 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985400, 71.25732391202390700, -28.20555803802997700 ) ) ; +#42547 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#42548 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653751900, 61.39409401757625800, -28.39369363572360100 ) ) ; +#42549 = ORIENTED_EDGE ( 'NONE', *, *, #56806, .T. ) ; +#42550 = CONICAL_SURFACE ( 'NONE', #59751, 10.00000000000009200, 0.7853981633974447300 ) ; +#42551 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42552 = AXIS2_PLACEMENT_3D ( 'NONE', #36378, #11660, #55141 ) ; +#42553 = ORIENTED_EDGE ( 'NONE', *, *, #62741, .T. ) ; +#42554 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39438, #45657, #51920, #14702 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549274299500E-007, 0.0008759529789574159400 ), + .UNSPECIFIED. ) ; +#42555 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#42556 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999997300, 50.33333333333335000, -8.133761268305514500 ) ) ; +#42557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42558 = EDGE_CURVE ( 'NONE', #19103, #14827, #29816, .T. ) ; +#42559 = FACE_OUTER_BOUND ( 'NONE', #5124, .T. ) ; +#42560 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 53.33333333333335000, 3.124568980892187500 ) ) ; +#42561 = ORIENTED_EDGE ( 'NONE', *, *, #69891, .T. ) ; +#42562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42563 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#42564 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#42565 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#42566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42567 = ORIENTED_EDGE ( 'NONE', *, *, #65392, .T. ) ; +#42568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42570 = CARTESIAN_POINT ( 'NONE', ( -2.550568452615780100, 50.66712112140498900, -28.65429851891194300 ) ) ; +#42571 = CARTESIAN_POINT ( 'NONE', ( 7.806255641895631900E-015, 25.72261628933269900, -28.70555803802994200 ) ) ; +#42572 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432841900, 39.35339758437810100, -28.20555803802995200 ) ) ; +#42573 = CIRCLE ( 'NONE', #58838, 10.00000000000009600 ) ; +#42574 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#42575 = CONICAL_SURFACE ( 'NONE', #54784, 10.00000000000009400, 0.7853981633974447300 ) ; +#42576 = CARTESIAN_POINT ( 'NONE', ( 11.18082765632743800, 9.542716366279488900, -28.36017162544802200 ) ) ; +#42577 = VERTEX_POINT ( 'NONE', #1243 ) ; +#42578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42579 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#42581 = EDGE_CURVE ( 'NONE', #34797, #76994, #15314, .T. ) ; +#42580 = ORIENTED_EDGE ( 'NONE', *, *, #79447, .T. ) ; +#42582 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654442000, 81.32559822014155800, -28.29986836858032000 ) ) ; +#42583 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42584 = ORIENTED_EDGE ( 'NONE', *, *, #79783, .F. ) ; +#42585 = ORIENTED_EDGE ( 'NONE', *, *, #77196, .T. ) ; +#42586 = EDGE_CURVE ( 'NONE', #28268, #24293, #23894, .T. ) ; +#42587 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57503, #63783, #38974, #1719 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249601800, 0.0007802304471361536500 ), + .UNSPECIFIED. ) ; +#42588 = ORIENTED_EDGE ( 'NONE', *, *, #12364, .F. ) ; +#42589 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42590 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.22294471194862800, -28.20555803802997700 ) ) ; +#42591 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828105100, 80.46231468379673400, -28.37082013777818500 ) ) ; +#42592 = AXIS2_PLACEMENT_3D ( 'NONE', #48659, #11449, #54941 ) ; +#42593 = EDGE_LOOP ( 'NONE', ( #1852, #72766, #57140 ) ) ; +#42594 = EDGE_CURVE ( 'NONE', #73733, #69760, #56972, .T. ) ; +#42595 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#42596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42597 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507540200, 10.52620220503734000, -28.70555803803009500 ) ) ; +#42598 = ADVANCED_FACE ( 'NONE', ( #42350 ), #69596, .T. ) ; +#42599 = EDGE_CURVE ( 'NONE', #10311, #2852, #5380, .T. ) ; +#42600 = CIRCLE ( 'NONE', #72066, 10.50000000000009900 ) ; +#42601 = ORIENTED_EDGE ( 'NONE', *, *, #77289, .F. ) ; +#42602 = EDGE_LOOP ( 'NONE', ( #54608, #44024, #36776, #24828, #24331, #22318, #77737 ) ) ; +#42603 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819343900, 59.94924284854693000, -28.20555803802997700 ) ) ; +#42604 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 59.66666666666667100, -6.705558038030000400 ) ) ; +#42605 = ORIENTED_EDGE ( 'NONE', *, *, #71551, .F. ) ; +#42606 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754100, 27.50972971738994100, -28.70555803802994500 ) ) ; +#42607 = CONICAL_SURFACE ( 'NONE', #41716, 10.50000000000009600, 0.7853981633974500600 ) ; +#42608 = ADVANCED_FACE ( 'NONE', ( #71570 ), #19985, .T. ) ; +#42609 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 24.83333333333333200, 0.1341879241256075400 ) ) ; +#42610 = AXIS2_PLACEMENT_3D ( 'NONE', #32579, #70098, #69840 ) ; +#42611 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42613 = VERTEX_POINT ( 'NONE', #14311 ) ; +#42612 = EDGE_CURVE ( 'NONE', #46628, #43614, #36500, .T. ) ; +#42614 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484573400, 70.58127875436078100, -28.53757464917569900 ) ) ; +#42615 = EDGE_CURVE ( 'NONE', #56186, #37280, #835, .T. ) ; +#42616 = AXIS2_PLACEMENT_3D ( 'NONE', #74930, #68666, #37626 ) ; +#42617 = CONICAL_SURFACE ( 'NONE', #66163, 10.50000000000009600, 0.7853981633974500600 ) ; +#42618 = VERTEX_POINT ( 'NONE', #45261 ) ; +#42619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42620 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 27.16666666666667500, 1.741883078712356500 ) ) ; +#42621 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#42622 = VERTEX_POINT ( 'NONE', #45529 ) ; +#42623 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807117500, 56.79999999999993300, -28.70555803802997700 ) ) ; +#42624 = VERTEX_POINT ( 'NONE', #8285 ) ; +#42625 = EDGE_CURVE ( 'NONE', #2617, #55080, #67177, .T. ) ; +#42626 = FACE_OUTER_BOUND ( 'NONE', #32535, .T. ) ; +#42627 = AXIS2_PLACEMENT_3D ( 'NONE', #80310, #43024, #5786 ) ; +#42628 = AXIS2_PLACEMENT_3D ( 'NONE', #34174, #77687, #40417 ) ; +#42629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42630 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 82.97376207875059600, -28.70555803802997700 ) ) ; +#42631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42632 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 20.24660241562182300, -28.20555803802994200 ) ) ; +#42634 = ADVANCED_FACE ( 'NONE', ( #21931 ), #51064, .F. ) ; +#42633 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18043, #61571, #24304, #67816 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259879944600E-007, 0.0004559721492004745300 ), + .UNSPECIFIED. ) ; +#42635 = CARTESIAN_POINT ( 'NONE', ( -16.93414660040043200, 22.14286054144887200, -28.51850601323090500 ) ) ; +#42636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42637 = CONICAL_SURFACE ( 'NONE', #4629, 10.00000000000009400, 0.7853981633974447300 ) ; +#42638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42640 = VERTEX_POINT ( 'NONE', #76844 ) ; +#42641 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462477000, 51.39409401757625800, -28.39369363572359700 ) ) ; +#42642 = VERTEX_POINT ( 'NONE', #39584 ) ; +#42643 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -49.81214711292819400, 4.415659757031871100E-015 ) ) ; +#42644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42645 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#42646 = VERTEX_POINT ( 'NONE', #2294 ) ; +#42647 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925243100, 17.31967837323366400, -28.55467576046983100 ) ) ; +#42648 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655676200, 28.42298334620756600, -28.20555803802994500 ) ) ; +#42649 = CIRCLE ( 'NONE', #54035, 10.00000000000009400 ) ; +#42650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42651 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459459400, 72.51973550835671700, -28.70555803803004500 ) ) ; +#42652 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 71.43650294695130800, -28.30782889147482400 ) ) ; +#42653 = FACE_OUTER_BOUND ( 'NONE', #34022, .T. ) ; +#42654 = AXIS2_PLACEMENT_3D ( 'NONE', #70528, #76509, #20776 ) ; +#42655 = ORIENTED_EDGE ( 'NONE', *, *, #60965, .F. ) ; +#42656 = EDGE_LOOP ( 'NONE', ( #63714, #66439, #66382, #71693 ) ) ; +#42657 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 30.66666666666667500, -8.133761268305512700 ) ) ; +#42658 = EDGE_LOOP ( 'NONE', ( #46071, #32200, #59884 ) ) ; +#42659 = CONICAL_SURFACE ( 'NONE', #79711, 10.00000000000009200, 0.7853981633974447300 ) ; +#42660 = EDGE_LOOP ( 'NONE', ( #32436, #10571, #77412 ) ) ; +#42661 = ORIENTED_EDGE ( 'NONE', *, *, #61932, .T. ) ; +#42662 = ORIENTED_EDGE ( 'NONE', *, *, #13604, .T. ) ; +#42663 = EDGE_LOOP ( 'NONE', ( #34239, #45403, #31546, #65278 ) ) ; +#42664 = ORIENTED_EDGE ( 'NONE', *, *, #13585, .F. ) ; +#42665 = AXIS2_PLACEMENT_3D ( 'NONE', #22504, #66027, #28799 ) ; +#42667 = ORIENTED_EDGE ( 'NONE', *, *, #64904, .F. ) ; +#42666 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#42668 = CARTESIAN_POINT ( 'NONE', ( 7.806964973224529200, 57.14999999999999900, -4.837995319014578600 ) ) ; +#42669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42670 = EDGE_CURVE ( 'NONE', #49674, #71511, #52689, .T. ) ; +#42671 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42672 = VERTEX_POINT ( 'NONE', #64639 ) ; +#42673 = FACE_OUTER_BOUND ( 'NONE', #70302, .T. ) ; +#42674 = ORIENTED_EDGE ( 'NONE', *, *, #70120, .T. ) ; +#42675 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655983500, 17.92298334620702600, -28.20555803803002000 ) ) ; +#42676 = CARTESIAN_POINT ( 'NONE', ( -3.935438998026763900, 71.50961459723748700, -28.29483879644641700 ) ) ; +#42677 = AXIS2_PLACEMENT_3D ( 'NONE', #60509, #23230, #66758 ) ; +#42678 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488151300, 59.60439022488343900, -28.70555803803014400 ) ) ; +#42679 = ORIENTED_EDGE ( 'NONE', *, *, #47581, .F. ) ; +#42680 = EDGE_LOOP ( 'NONE', ( #62341, #75683, #69416, #61101, #55940, #58689 ) ) ; +#42681 = ORIENTED_EDGE ( 'NONE', *, *, #38379, .T. ) ; +#42682 = EDGE_LOOP ( 'NONE', ( #23921, #74093, #1196, #30840, #39088, #42050 ) ) ; +#42683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42684 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58506, #33485, #64793, #27524, #71010, #33759 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002534260069688743500, 0.005068520139377487000 ), + .UNSPECIFIED. ) ; +#42685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42686 = CIRCLE ( 'NONE', #4679, 9.500000000000097700 ) ; +#42687 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714800, 49.85339758437810100, -28.20555803802996700 ) ) ; +#42688 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492465600, 49.07379779496241000, -28.70555803802996700 ) ) ; +#42689 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 77.94142842854304800, -28.20555803803030800 ) ) ; +#42690 = ORIENTED_EDGE ( 'NONE', *, *, #61697, .T. ) ; +#42691 = ADVANCED_FACE ( 'NONE', ( #38427 ), #18029, .F. ) ; +#42692 = EDGE_CURVE ( 'NONE', #13553, #42265, #34586, .T. ) ; +#42693 = CONICAL_SURFACE ( 'NONE', #79157, 10.00000000000009200, 0.7853981633974447300 ) ; +#42695 = EDGE_LOOP ( 'NONE', ( #63936, #37145, #75164, #36879, #25579, #21294, #30730, #35161 ) ) ; +#42694 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512263400, 61.99560977511676900, -28.70555803802997700 ) ) ; +#42696 = EDGE_CURVE ( 'NONE', #53776, #35760, #38218, .T. ) ; +#42697 = ORIENTED_EDGE ( 'NONE', *, *, #5079, .T. ) ; +#42698 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42699 = ORIENTED_EDGE ( 'NONE', *, *, #52959, .T. ) ; +#42700 = ADVANCED_FACE ( 'NONE', ( #73528 ), #71133, .T. ) ; +#42701 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, -0.8333333333333262600, -6.205558038030004800 ) ) ; +#42702 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#42703 = EDGE_CURVE ( 'NONE', #40556, #34969, #23800, .T. ) ; +#42704 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 39.33333333333334300, -8.133761268305512700 ) ) ; +#42705 = EDGE_CURVE ( 'NONE', #14733, #10382, #67665, .T. ) ; +#42706 = AXIS2_PLACEMENT_3D ( 'NONE', #16569, #60094, #22817 ) ; +#42707 = FACE_OUTER_BOUND ( 'NONE', #80387, .T. ) ; +#42708 = ADVANCED_FACE ( 'NONE', ( #3405 ), #16079, .T. ) ; +#42709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42710 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#42711 = FACE_OUTER_BOUND ( 'NONE', #7080, .T. ) ; +#42712 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 4.500000000000014200, 4.650848422521012700 ) ) ; +#42713 = ORIENTED_EDGE ( 'NONE', *, *, #35137, .T. ) ; +#42714 = ORIENTED_EDGE ( 'NONE', *, *, #57666, .F. ) ; +#42715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42716 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690205900, 55.79999999999966300, -28.70555803803030800 ) ) ; +#42717 = ORIENTED_EDGE ( 'NONE', *, *, #40024, .F. ) ; +#42718 = AXIS2_PLACEMENT_3D ( 'NONE', #48342, #42629, #5396 ) ; +#42719 = EDGE_CURVE ( 'NONE', #49022, #16188, #49124, .T. ) ; +#42720 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42721 = EDGE_CURVE ( 'NONE', #64739, #37108, #9296, .T. ) ; +#42722 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112217700, 30.52667319908790200, -28.37233769390156700 ) ) ; +#42723 = EDGE_CURVE ( 'NONE', #52990, #40461, #1454, .T. ) ; +#42725 = ADVANCED_FACE ( 'NONE', ( #32610 ), #78372, .F. ) ; +#42724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22350, #59627, #28654, #72146 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693209261600E-007, 0.0008724363063898880500 ), + .UNSPECIFIED. ) ; +#42726 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#42727 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42728 = FACE_OUTER_BOUND ( 'NONE', #23955, .T. ) ; +#42729 = ORIENTED_EDGE ( 'NONE', *, *, #39959, .F. ) ; +#42730 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730142100, 71.58737389638845600, -28.29936525552465600 ) ) ; +#42731 = CONICAL_SURFACE ( 'NONE', #47379, 10.00000000000009600, 0.7853981633974447300 ) ; +#42732 = ORIENTED_EDGE ( 'NONE', *, *, #20251, .F. ) ; +#42733 = ORIENTED_EDGE ( 'NONE', *, *, #15319, .T. ) ; +#42734 = AXIS2_PLACEMENT_3D ( 'NONE', #20173, #63702, #26448 ) ; +#42735 = ORIENTED_EDGE ( 'NONE', *, *, #26409, .F. ) ; +#42736 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1103, #44575, #63428, #26167 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001058016555892136700 ), + .UNSPECIFIED. ) ; +#42737 = CIRCLE ( 'NONE', #47004, 10.50000000000009600 ) ; +#42738 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#42739 = ORIENTED_EDGE ( 'NONE', *, *, #56781, .T. ) ; +#42740 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#42741 = AXIS2_PLACEMENT_3D ( 'NONE', #9524, #15792, #71285 ) ; +#42742 = EDGE_LOOP ( 'NONE', ( #41681, #5222, #63338, #18315, #66341, #25754 ) ) ; +#42743 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898008800, 51.21894733120746700, -28.33409528117022100 ) ) ; +#42744 = ORIENTED_EDGE ( 'NONE', *, *, #26558, .T. ) ; +#42745 = EDGE_LOOP ( 'NONE', ( #4755, #59255, #22793, #47751 ) ) ; +#42746 = ORIENTED_EDGE ( 'NONE', *, *, #27841, .F. ) ; +#42747 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29597, #42048, #11077, #54578 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185118600, 0.001517199873936354200 ), + .UNSPECIFIED. ) ; +#42748 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 49.66349705304866500, -28.30782889147481600 ) ) ; +#42749 = EDGE_CURVE ( 'NONE', #29329, #22567, #75632, .T. ) ; +#42750 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656960500, 80.65007990305427700, -28.43638873268705000 ) ) ; +#42751 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404400, 17.92298334620739200, -28.20555803802993500 ) ) ; +#42752 = AXIS2_PLACEMENT_3D ( 'NONE', #16107, #65621, #65899 ) ; +#42753 = AXIS2_PLACEMENT_3D ( 'NONE', #17757, #61293, #24013 ) ; +#42754 = ORIENTED_EDGE ( 'NONE', *, *, #38087, .F. ) ; +#42755 = CARTESIAN_POINT ( 'NONE', ( -11.16718281739631100, 90.56656192502381900, -28.37235298663060600 ) ) ; +#42756 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#42757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42758 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42465, #79760, #48710, #11503 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200807064100, 0.0008866563355353362700 ), + .UNSPECIFIED. ) ; +#42759 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42760 = CARTESIAN_POINT ( 'NONE', ( 17.25268700374509100, 40.04361721375111900, -28.44857805373787600 ) ) ; +#42761 = CONICAL_SURFACE ( 'NONE', #57862, 10.50000000000009600, 0.7853981633974500600 ) ; +#42762 = EDGE_LOOP ( 'NONE', ( #28823, #21720, #74100, #30152, #25252 ) ) ; +#42763 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#42764 = ORIENTED_EDGE ( 'NONE', *, *, #71942, .F. ) ; +#42765 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544433200, 81.87833896172669800, -28.53892303408229500 ) ) ; +#42766 = ORIENTED_EDGE ( 'NONE', *, *, #45973, .T. ) ; +#42767 = EDGE_LOOP ( 'NONE', ( #71576, #55470, #61313, #59325, #38550 ) ) ; +#42768 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818145900, 89.94924284854691600, -28.20555803803031100 ) ) ; +#42769 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 60.29722425778842900, -28.32715733700494100 ) ) ; +#42770 = CIRCLE ( 'NONE', #977, 10.50000000000009600 ) ; +#42771 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846307800, 60.79999999999999700, -28.55171188418377100 ) ) ; +#42772 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285896500, 67.92318720225480900, -28.70555803803030800 ) ) ; +#42773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42774 = ORIENTED_EDGE ( 'NONE', *, *, #71551, .T. ) ; +#42775 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42776 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42777 = VERTEX_POINT ( 'NONE', #3378 ) ; +#42778 = AXIS2_PLACEMENT_3D ( 'NONE', #37345, #103, #43606 ) ; +#42779 = CONICAL_SURFACE ( 'NONE', #2987, 10.00000000000009400, 0.7853981633974447300 ) ; +#42780 = ORIENTED_EDGE ( 'NONE', *, *, #47851, .F. ) ; +#42781 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#42782 = ORIENTED_EDGE ( 'NONE', *, *, #23946, .T. ) ; +#42783 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 45.33333333333333600, -5.205558038030008400 ) ) ; +#42784 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42785 = AXIS2_PLACEMENT_3D ( 'NONE', #77863, #40585, #3321 ) ; +#42786 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42787 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80428, #18133, #24660, #68166 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736384275200E-007, 0.0009376786059871959200 ), + .UNSPECIFIED. ) ; +#42788 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260020500, 41.39965687931163500, -28.70555803803001600 ) ) ; +#42789 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224877700, 61.50962196508497500, -28.29483400905894900 ) ) ; +#42790 = ADVANCED_FACE ( 'NONE', ( #14120 ), #45210, .T. ) ; +#42791 = EDGE_CURVE ( 'NONE', #55552, #19038, #61210, .T. ) ; +#42792 = AXIS2_PLACEMENT_3D ( 'NONE', #78817, #29075, #53769 ) ; +#42793 = CIRCLE ( 'NONE', #5587, 9.500000000000101300 ) ; +#42794 = CARTESIAN_POINT ( 'NONE', ( -10.22115791441228600, 30.93523632220587800, -28.30315276798566200 ) ) ; +#42795 = CONICAL_SURFACE ( 'NONE', #18114, 10.00000000000009600, 0.7853981633974447300 ) ; +#42796 = EDGE_LOOP ( 'NONE', ( #5628, #34469, #14430, #66345 ) ) ; +#42797 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970300, 63.65857157145682500, -28.20555803803047800 ) ) ; +#42798 = ADVANCED_FACE ( 'NONE', ( #53046 ), #12177, .F. ) ; +#42799 = EDGE_LOOP ( 'NONE', ( #11308, #80329, #25927, #59330 ) ) ; +#42800 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#42801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42802 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 73.65857157145681800, -28.20555803803047800 ) ) ; +#42803 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 16.66666666666667500, 8.320721403598824400 ) ) ; +#42804 = CONICAL_SURFACE ( 'NONE', #34152, 10.50000000000009600, 0.7853981633974518300 ) ; +#42805 = ORIENTED_EDGE ( 'NONE', *, *, #52946, .F. ) ; +#42806 = ORIENTED_EDGE ( 'NONE', *, *, #39189, .F. ) ; +#42807 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471826900, 39.13131911501876200, -28.51286550264508800 ) ) ; +#42808 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284931700, 49.77966528189953300, -28.30868034705251500 ) ) ; +#42809 = EDGE_CURVE ( 'NONE', #5650, #30989, #46688, .T. ) ; +#42810 = ADVANCED_FACE ( 'NONE', ( #47171 ), #59881, .T. ) ; +#42811 = CONICAL_SURFACE ( 'NONE', #9992, 10.00000000000009200, 0.7853981633974447300 ) ; +#42812 = EDGE_CURVE ( 'NONE', #55373, #52508, #76389, .T. ) ; +#42813 = EDGE_LOOP ( 'NONE', ( #16472, #23550, #14955, #71931, #43361 ) ) ; +#42814 = ORIENTED_EDGE ( 'NONE', *, *, #15796, .T. ) ; +#42815 = ORIENTED_EDGE ( 'NONE', *, *, #46557, .F. ) ; +#42816 = ORIENTED_EDGE ( 'NONE', *, *, #71927, .F. ) ; +#42817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42818 = ORIENTED_EDGE ( 'NONE', *, *, #57394, .T. ) ; +#42819 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 28.23827450271715000, -28.47230003642276900 ) ) ; +#42820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42821 = ORIENTED_EDGE ( 'NONE', *, *, #38420, .F. ) ; +#42822 = ORIENTED_EDGE ( 'NONE', *, *, #55685, .F. ) ; +#42823 = CARTESIAN_POINT ( 'NONE', ( 4.344797651231069800, 18.78860447109592300, -28.53900456328633700 ) ) ; +#42824 = EDGE_CURVE ( 'NONE', #74733, #301, #32257, .T. ) ; +#42825 = ADVANCED_FACE ( 'NONE', ( #61836 ), #66243, .T. ) ; +#42826 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171893900, 71.13768531620323200, -28.37082013777819300 ) ) ; +#42827 = EDGE_CURVE ( 'NONE', #23993, #55249, #17812, .T. ) ; +#42828 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448997100, 48.16666666666665700, 6.794441961969993400 ) ) ; +#42830 = ORIENTED_EDGE ( 'NONE', *, *, #17012, .T. ) ; +#42829 = AXIS2_PLACEMENT_3D ( 'NONE', #34985, #59736, #65986 ) ; +#42831 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 61.43945992495518000, -28.34042301926901400 ) ) ; +#42832 = FACE_OUTER_BOUND ( 'NONE', #48797, .T. ) ; +#42833 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#42834 = VERTEX_POINT ( 'NONE', #47956 ) ; +#42835 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 51.16666666666668600, -6.205558038030004800 ) ) ; +#42836 = ORIENTED_EDGE ( 'NONE', *, *, #32021, .T. ) ; +#42837 = EDGE_CURVE ( 'NONE', #40802, #43689, #63775, .T. ) ; +#42838 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819198200, 61.65075715145310700, -28.20555803802997700 ) ) ; +#42839 = PLANE ( 'NONE', #14463 ) ; +#42840 = ORIENTED_EDGE ( 'NONE', *, *, #12740, .F. ) ; +#42841 = ORIENTED_EDGE ( 'NONE', *, *, #11761, .T. ) ; +#42842 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 10.11077422949657200, -28.37255355648631300 ) ) ; +#42843 = ORIENTED_EDGE ( 'NONE', *, *, #21238, .F. ) ; +#42844 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#42845 = CONICAL_SURFACE ( 'NONE', #35313, 10.50000000000009600, 0.7853981633974500600 ) ; +#42846 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42848 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42849 = AXIS2_PLACEMENT_3D ( 'NONE', #43468, #6230, #49701 ) ; +#42850 = VERTEX_POINT ( 'NONE', #16985 ) ; +#42851 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.737967874686777500, -28.38801640354855500 ) ) ; +#42852 = EDGE_CURVE ( 'NONE', #22988, #61916, #3317, .T. ) ; +#42853 = EDGE_CURVE ( 'NONE', #50513, #26563, #28769, .T. ) ; +#42854 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42855 = EDGE_CURVE ( 'NONE', #67438, #57479, #69637, .T. ) ; +#42856 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344611100, 49.42298334620778600, -28.20555803802997400 ) ) ; +#42857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3973, #22489, #53747, #16505 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572401803800E-007, 0.0004669842289003365000 ), + .UNSPECIFIED. ) ; +#42859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42860 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 36.94142842854297000, -28.20555803802995200 ) ) ; +#42861 = AXIS2_PLACEMENT_3D ( 'NONE', #8799, #58597, #21095 ) ; +#42862 = CIRCLE ( 'NONE', #49312, 10.50000000000009600 ) ; +#42863 = ORIENTED_EDGE ( 'NONE', *, *, #4468, .T. ) ; +#42864 = VERTEX_POINT ( 'NONE', #11007 ) ; +#42865 = AXIS2_PLACEMENT_3D ( 'NONE', #55951, #62235, #12457 ) ; +#42866 = AXIS2_PLACEMENT_3D ( 'NONE', #75408, #38105, #857 ) ; +#42867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1015, #38256, #50767, #13566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390003743000E-007, 0.0008082646680357307400 ), + .UNSPECIFIED. ) ; +#42868 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 28.31066373133500800, -28.53923937255169500 ) ) ; +#42869 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42870 = PLANE ( 'NONE', #40514 ) ; +#42871 = CIRCLE ( 'NONE', #47371, 10.50000000000009600 ) ; +#42872 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804305000, 15.94142842854303400, -28.37229765499298000 ) ) ; +#42873 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 57.50000000000000700, 6.847000845227641200 ) ) ; +#42874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54822, #29870, #61115, #23855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574859695400E-007, 0.0007596410370205402000 ), + .UNSPECIFIED. ) ; +#42875 = ORIENTED_EDGE ( 'NONE', *, *, #26068, .T. ) ; +#42876 = ORIENTED_EDGE ( 'NONE', *, *, #54866, .F. ) ; +#42877 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550040600, 71.76337688193831400, -28.37223523914929000 ) ) ; +#42878 = ORIENTED_EDGE ( 'NONE', *, *, #4894, .T. ) ; +#42879 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 22.66666666666667100, -3.705558038030004400 ) ) ; +#42880 = AXIS2_PLACEMENT_3D ( 'NONE', #62552, #25302, #68796 ) ; +#42881 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#42882 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5770, #24806, #68313, #31066 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003299945329126106500, 0.001108409907889990900 ), + .UNSPECIFIED. ) ; +#42883 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42884 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185600, 30.96868088498122200, -28.51286550264512000 ) ) ; +#42885 = LINE ( 'NONE', #2422, #44798 ) ; +#42886 = ORIENTED_EDGE ( 'NONE', *, *, #46872, .F. ) ; +#42887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42888 = VERTEX_POINT ( 'NONE', #16720 ) ; +#42889 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#42890 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42891 = EDGE_CURVE ( 'NONE', #34797, #4221, #30682, .T. ) ; +#42892 = CONICAL_SURFACE ( 'NONE', #78761, 10.50000000000009200, 0.7853981633974482800 ) ; +#42893 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 25.00000000000002100, -1.205558038030002800 ) ) ; +#42894 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#42895 = EDGE_LOOP ( 'NONE', ( #32232, #20034, #64256, #11659, #26701, #4952, #2930, #23546 ) ) ; +#42896 = AXIS2_PLACEMENT_3D ( 'NONE', #1326, #7570, #38566 ) ; +#42897 = ORIENTED_EDGE ( 'NONE', *, *, #46682, .F. ) ; +#42898 = ORIENTED_EDGE ( 'NONE', *, *, #60752, .T. ) ; +#42899 = ORIENTED_EDGE ( 'NONE', *, *, #6755, .F. ) ; +#42900 = VERTEX_POINT ( 'NONE', #42240 ) ; +#42901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42902 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#42903 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#42904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42905 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428050700, 51.52858243452100600, -28.70555803803030800 ) ) ; +#42906 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.23796787468678800, -28.38801640354855500 ) ) ; +#42907 = CIRCLE ( 'NONE', #79672, 9.500000000000099500 ) ; +#42908 = AXIS2_PLACEMENT_3D ( 'NONE', #11508, #54993, #17758 ) ; +#42909 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853323300, 38.80869142985021400, -28.37223374938532300 ) ) ; +#42910 = ORIENTED_EDGE ( 'NONE', *, *, #44250, .T. ) ; +#42911 = VERTEX_POINT ( 'NONE', #48477 ) ; +#42912 = ADVANCED_FACE ( 'NONE', ( #43288 ), #24826, .T. ) ; +#42913 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063449500, 20.59789380924872800, -28.25343951603343800 ) ) ; +#42914 = VERTEX_POINT ( 'NONE', #30067 ) ; +#42915 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343285200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#42916 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 83.99926474563210400, -28.70555803802999500 ) ) ; +#42917 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.523234146875355000E-016 ) ) ; +#42918 = VERTEX_POINT ( 'NONE', #73558 ) ; +#42919 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609429500, 71.46283204837338600, -28.48697406221667100 ) ) ; +#42920 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42921 = ADVANCED_FACE ( 'NONE', ( #26776 ), #72516, .T. ) ; +#42922 = FACE_OUTER_BOUND ( 'NONE', #34993, .T. ) ; +#42923 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42924 = ORIENTED_EDGE ( 'NONE', *, *, #39751, .F. ) ; +#42925 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346210200, 90.20590598242330300, -28.39369363572414100 ) ) ; +#42926 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75280, #31771, #13284, #56771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641855781966400E-007, 0.0008759659331882782000 ), + .UNSPECIFIED. ) ; +#42927 = ADVANCED_FACE ( 'NONE', ( #57904 ), #39388, .F. ) ; +#42928 = ORIENTED_EDGE ( 'NONE', *, *, #50204, .T. ) ; +#42929 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#42930 = EDGE_CURVE ( 'NONE', #48907, #78782, #55181, .T. ) ; +#42931 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 28.50000000000001100, 4.650848422521016300 ) ) ; +#42932 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#42933 = CONICAL_SURFACE ( 'NONE', #59741, 10.50000000000009600, 0.7853981633974518300 ) ; +#42934 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993400, 77.22261628933213700, -28.70555803803047500 ) ) ; +#42935 = ORIENTED_EDGE ( 'NONE', *, *, #48636, .T. ) ; +#42936 = EDGE_CURVE ( 'NONE', #64305, #56906, #80312, .T. ) ; +#42937 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 20.96823913367203900, -28.70555803802995200 ) ) ; +#42938 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.16749699759768800, -28.20555803802997700 ) ) ; +#42939 = CARTESIAN_POINT ( 'NONE', ( 17.14620600645630700, 82.51871030405773400, -28.47270666107741000 ) ) ; +#42940 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 28.85339758437810400, -28.20555803802994200 ) ) ; +#42941 = EDGE_CURVE ( 'NONE', #80466, #6790, #55932, .T. ) ; +#42942 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42944 = EDGE_CURVE ( 'NONE', #66234, #33342, #40724, .T. ) ; +#42945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42946 = EDGE_CURVE ( 'NONE', #4762, #72130, #26303, .T. ) ; +#42947 = ORIENTED_EDGE ( 'NONE', *, *, #38763, .F. ) ; +#42948 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#42949 = ORIENTED_EDGE ( 'NONE', *, *, #15564, .F. ) ; +#42950 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344327800, 20.67701665379242500, -28.20555803802994200 ) ) ; +#42951 = VERTEX_POINT ( 'NONE', #18322 ) ; +#42952 = CARTESIAN_POINT ( 'NONE', ( -15.51770601915500700, 8.964587961689979100, -28.65180968932673600 ) ) ; +#42953 = CARTESIAN_POINT ( 'NONE', ( -12.88374526358323100, 14.04999999999997600, -28.53994725305373200 ) ) ; +#42954 = AXIS2_PLACEMENT_3D ( 'NONE', #34544, #78047, #40768 ) ; +#42955 = EDGE_CURVE ( 'NONE', #63854, #77573, #22869, .T. ) ; +#42956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71359, #71632, #9604, #53110 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907062557900E-007, 0.0006651184466340198300 ), + .UNSPECIFIED. ) ; +#42957 = EDGE_CURVE ( 'NONE', #14906, #7482, #11828, .T. ) ; +#42958 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148628700, 25.50238095238078300, -28.70555803802994200 ) ) ; +#42959 = EDGE_CURVE ( 'NONE', #10423, #35498, #78133, .T. ) ; +#42960 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.66749699759768800, -28.20555803802994200 ) ) ; +#42961 = CONICAL_SURFACE ( 'NONE', #57512, 10.00000000000009200, 0.7853981633974447300 ) ; +#42962 = EDGE_LOOP ( 'NONE', ( #67957, #35222, #11151 ) ) ; +#42963 = ORIENTED_EDGE ( 'NONE', *, *, #69073, .T. ) ; +#42964 = AXIS2_PLACEMENT_3D ( 'NONE', #30854, #74368, #37068 ) ; +#42965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42966 = EDGE_LOOP ( 'NONE', ( #34191, #3643, #54079, #6341 ) ) ; +#42967 = CONICAL_SURFACE ( 'NONE', #54181, 10.00000000000009400, 0.7853981633974447300 ) ; +#42968 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20806, #64363, #39562, #2274 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141652888300 ), + .UNSPECIFIED. ) ; +#42969 = VERTEX_POINT ( 'NONE', #68361 ) ; +#42970 = ORIENTED_EDGE ( 'NONE', *, *, #55805, .F. ) ; +#42971 = VERTEX_POINT ( 'NONE', #12353 ) ; +#42972 = AXIS2_PLACEMENT_3D ( 'NONE', #15032, #46009, #40049 ) ; +#42973 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, -2.999999999999992900, 3.794441961969998300 ) ) ; +#42974 = AXIS2_PLACEMENT_3D ( 'NONE', #13065, #56542, #19295 ) ; +#42975 = AXIS2_PLACEMENT_3D ( 'NONE', #57442, #20189, #63721 ) ; +#42976 = CONICAL_SURFACE ( 'NONE', #16091, 10.50000000000009600, 0.7853981633974500600 ) ; +#42977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42978 = CARTESIAN_POINT ( 'NONE', ( 10.36049707220281300, 9.932503002402294000, -28.25438406275895900 ) ) ; +#42979 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 37.16666666666670000, 6.794441961969992500 ) ) ; +#42980 = ORIENTED_EDGE ( 'NONE', *, *, #31999, .T. ) ; +#42981 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274707400, 35.05000000000000400, -28.20555803802995200 ) ) ; +#42982 = CONICAL_SURFACE ( 'NONE', #16056, 10.00000000000009400, 0.7853981633974447300 ) ; +#42983 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#42984 = VERTEX_POINT ( 'NONE', #55830 ) ; +#42985 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#42986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#42987 = ORIENTED_EDGE ( 'NONE', *, *, #56858, .F. ) ; +#42988 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 2.333333333333340100, -8.133761268305512700 ) ) ; +#42989 = ORIENTED_EDGE ( 'NONE', *, *, #69418, .T. ) ; +#42990 = VERTEX_POINT ( 'NONE', #31123 ) ; +#42991 = CIRCLE ( 'NONE', #45497, 10.00000000000009600 ) ; +#42992 = ORIENTED_EDGE ( 'NONE', *, *, #54292, .T. ) ; +#42993 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#42994 = FACE_OUTER_BOUND ( 'NONE', #24843, .T. ) ; +#42995 = AXIS2_PLACEMENT_3D ( 'NONE', #55358, #18121, #61658 ) ; +#42996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#42997 = EDGE_CURVE ( 'NONE', #14498, #12176, #63695, .T. ) ; +#42998 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#42999 = ADVANCED_FACE ( 'NONE', ( #8227 ), #20921, .T. ) ; +#43000 = EDGE_LOOP ( 'NONE', ( #44985, #71001, #20206, #24253, #66778, #21562, #38665, #24902 ) ) ; +#43001 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894000, 80.46231468379673400, -28.37082013777818900 ) ) ; +#43002 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43003 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898058600, 41.21894733120737400, -28.33409528117009700 ) ) ; +#43004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43005 = FACE_OUTER_BOUND ( 'NONE', #19314, .T. ) ; +#43006 = EDGE_LOOP ( 'NONE', ( #20669, #79980, #43364 ) ) ; +#43007 = ORIENTED_EDGE ( 'NONE', *, *, #73031, .F. ) ; +#43008 = EDGE_CURVE ( 'NONE', #79804, #38494, #49173, .T. ) ; +#43009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43012 = AXIS2_PLACEMENT_3D ( 'NONE', #42781, #5539, #49005 ) ; +#43013 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284934600, 49.77966528189954000, -28.30868034705250100 ) ) ; +#43014 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.23928571352700000, -28.36868303842826600 ) ) ; +#43015 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#43016 = ADVANCED_FACE ( 'NONE', ( #53985 ), #68609, .T. ) ; +#43017 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 80.36203212531316400, -28.38801640354855800 ) ) ; +#43018 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13993, #26518, #1985, #45470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735598852800E-007, 0.0006896863566005482500 ), + .UNSPECIFIED. ) ; +#43022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43023 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449985700, 71.76337688193821400, -28.37223523914899900 ) ) ; +#43024 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43025 = AXIS2_PLACEMENT_3D ( 'NONE', #58031, #58298, #8226 ) ; +#43026 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#43027 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534568500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#43028 = EDGE_LOOP ( 'NONE', ( #54298, #10678, #20115 ) ) ; +#43029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43030 = ORIENTED_EDGE ( 'NONE', *, *, #46255, .T. ) ; +#43031 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455599900, 71.87833896172615800, -28.53892303408255800 ) ) ; +#43032 = AXIS2_PLACEMENT_3D ( 'NONE', #56677, #19424, #62963 ) ; +#43033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43034 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43035 = ADVANCED_FACE ( 'NONE', ( #70533 ), #35526, .T. ) ; +#43036 = CIRCLE ( 'NONE', #13219, 10.50000000000009600 ) ; +#43037 = EDGE_LOOP ( 'NONE', ( #72044, #44879, #6505 ) ) ; +#43038 = CONICAL_SURFACE ( 'NONE', #7591, 10.00000000000009200, 0.7853981633974447300 ) ; +#43040 = EDGE_CURVE ( 'NONE', #48799, #79395, #52003, .T. ) ; +#43039 = ORIENTED_EDGE ( 'NONE', *, *, #27245, .F. ) ; +#43041 = VERTEX_POINT ( 'NONE', #19117 ) ; +#43042 = CONICAL_SURFACE ( 'NONE', #71037, 10.50000000000009600, 0.7853981633974500600 ) ; +#43043 = CARTESIAN_POINT ( 'NONE', ( -10.63940720644214200, 49.66749699759768800, -28.25435056028472400 ) ) ; +#43044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65941, #22412, #3895, #47386 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247639326400, 0.0009605145132132136700 ), + .UNSPECIFIED. ) ; +#43045 = ORIENTED_EDGE ( 'NONE', *, *, #80114, .T. ) ; +#43046 = EDGE_LOOP ( 'NONE', ( #71759, #24136, #32505, #45519, #37115 ) ) ; +#43047 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 43.16666666666669300, 0.9380355014189834000 ) ) ; +#43048 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180657900, 71.65075715145295000, -28.20555803803014100 ) ) ; +#43049 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19953, #32187, #26225, #69706 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775793244500, 0.0009605145132142258800 ), + .UNSPECIFIED. ) ; +#43050 = FACE_OUTER_BOUND ( 'NONE', #51227, .T. ) ; +#43051 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43052 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147900, 51.52858243452072900, -28.70555803803030800 ) ) ; +#43053 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43054 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996400, 55.67652461701997200, -28.70555803802997700 ) ) ; +#43055 = ORIENTED_EDGE ( 'NONE', *, *, #6054, .T. ) ; +#43056 = EDGE_CURVE ( 'NONE', #1321, #28056, #34767, .T. ) ; +#43057 = CONICAL_SURFACE ( 'NONE', #8156, 10.00000000000009200, 0.7853981633974447300 ) ; +#43058 = EDGE_LOOP ( 'NONE', ( #59142, #61910, #14146 ) ) ; +#43059 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274725400, 35.36787096422367700, -28.37244029424739400 ) ) ; +#43060 = VERTEX_POINT ( 'NONE', #6882 ) ; +#43061 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66993, #23477, #4959, #48455 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001033575782259687800, 0.0004330091189932844000 ), + .UNSPECIFIED. ) ; +#43062 = ORIENTED_EDGE ( 'NONE', *, *, #52205, .F. ) ; +#43063 = CIRCLE ( 'NONE', #66888, 10.50000000000009600 ) ; +#43064 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 5.551115123125783700E-016 ) ) ; +#43065 = ORIENTED_EDGE ( 'NONE', *, *, #777, .F. ) ; +#43066 = FACE_OUTER_BOUND ( 'NONE', #2302, .T. ) ; +#43067 = AXIS2_PLACEMENT_3D ( 'NONE', #76342, #8053, #14339 ) ; +#43068 = EDGE_CURVE ( 'NONE', #16374, #1214, #10223, .T. ) ; +#43069 = EDGE_CURVE ( 'NONE', #14665, #23991, #6316, .T. ) ; +#43070 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43072 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844637500, 56.13383585008146800, -28.37247596307084100 ) ) ; +#43073 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43074 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 44.37738371066728900, -28.70555803802997700 ) ) ; +#43075 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 14.50000000000000400, -9.258116921287651700 ) ) ; +#43076 = EDGE_LOOP ( 'NONE', ( #45452, #19047, #36064 ) ) ; +#43077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43078 = ORIENTED_EDGE ( 'NONE', *, *, #56432, .F. ) ; +#43079 = EDGE_CURVE ( 'NONE', #74485, #1906, #37422, .T. ) ; +#43080 = CARTESIAN_POINT ( 'NONE', ( -10.53052054780170200, 91.59999999999999400, -28.70555803802999500 ) ) ; +#43081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43082 = CONICAL_SURFACE ( 'NONE', #56493, 10.00000000000009400, 0.7853981633974447300 ) ; +#43083 = EDGE_LOOP ( 'NONE', ( #79698, #69776, #46475, #30580 ) ) ; +#43084 = FACE_OUTER_BOUND ( 'NONE', #76773, .T. ) ; +#43085 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180450100, 61.65075715145295000, -28.20555803802997700 ) ) ; +#43086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43087 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063268300, 49.50210619075101400, -28.25343951603330700 ) ) ; +#43088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43089 = AXIS2_PLACEMENT_3D ( 'NONE', #14421, #63676, #64228 ) ; +#43090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43091 = AXIS2_PLACEMENT_3D ( 'NONE', #24562, #68078, #30831 ) ; +#43092 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25433, #50122, #31679, #75190 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621178200 ), + .UNSPECIFIED. ) ; +#43093 = EDGE_CURVE ( 'NONE', #54001, #14357, #41355, .T. ) ; +#43094 = ADVANCED_FACE ( 'NONE', ( #4359 ), #440, .F. ) ; +#43095 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000469800, 80.69949493661177100, -28.70555803803014400 ) ) ; +#43096 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 46.00000000000002100, -9.205558038030011000 ) ) ; +#43097 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#43098 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 37.62623792124939100, -28.70555803802995200 ) ) ; +#43099 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 49.00000000000002100, 3.794441961969998300 ) ) ; +#43100 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 9.968680884981223400, -28.51286550264509100 ) ) ; +#43101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43103 = ORIENTED_EDGE ( 'NONE', *, *, #44110, .F. ) ; +#43104 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818070600, 61.65075715145340500, -28.20555803803031100 ) ) ; +#43105 = EDGE_LOOP ( 'NONE', ( #78928, #47719, #5871 ) ) ; +#43106 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 101.5999999999999900, -18.70555803802999900 ) ) ; +#43107 = EDGE_CURVE ( 'NONE', #7032, #8615, #20292, .T. ) ; +#43108 = ADVANCED_FACE ( 'NONE', ( #33546 ), #48117, .T. ) ; +#43109 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43111 = AXIS2_PLACEMENT_3D ( 'NONE', #34211, #3176, #33933 ) ; +#43112 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180654400, 61.65075715145295700, -28.20555803803014100 ) ) ; +#43113 = AXIS2_PLACEMENT_3D ( 'NONE', #42485, #55006, #17769 ) ; +#43114 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195928600, 87.94142842854296300, -28.37229765499282100 ) ) ; +#43115 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43116 = ORIENTED_EDGE ( 'NONE', *, *, #69430, .F. ) ; +#43117 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 22.65857157145701000, -28.20555803802995200 ) ) ; +#43118 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#43119 = CIRCLE ( 'NONE', #29335, 9.500000000000099500 ) ; +#43120 = CARTESIAN_POINT ( 'NONE', ( -2.769188246343313500, 50.94994472024610800, -28.43636979168675400 ) ) ; +#43121 = VERTEX_POINT ( 'NONE', #38956 ) ; +#43122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43124 = FACE_OUTER_BOUND ( 'NONE', #56719, .T. ) ; +#43125 = VERTEX_POINT ( 'NONE', #1702 ) ; +#43126 = ADVANCED_FACE ( 'NONE', ( #66660 ), #2386, .T. ) ; +#43127 = ADVANCED_FACE ( 'NONE', ( #50052 ), #62758, .T. ) ; +#43128 = ORIENTED_EDGE ( 'NONE', *, *, #47353, .F. ) ; +#43129 = CONICAL_SURFACE ( 'NONE', #59001, 10.00000000000009200, 0.7853981633974447300 ) ; +#43130 = AXIS2_PLACEMENT_3D ( 'NONE', #64084, #70300, #1752 ) ; +#43132 = ORIENTED_EDGE ( 'NONE', *, *, #27754, .T. ) ; +#43131 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#43133 = VERTEX_POINT ( 'NONE', #33000 ) ; +#43134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43136 = ORIENTED_EDGE ( 'NONE', *, *, #37096, .F. ) ; +#43137 = CIRCLE ( 'NONE', #8667, 10.00000000000009400 ) ; +#43138 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571429700, 39.07141756547892400, -28.70555803802995200 ) ) ; +#43139 = ADVANCED_FACE ( 'NONE', ( #17016 ), #29691, .T. ) ; +#43140 = FACE_OUTER_BOUND ( 'NONE', #74842, .T. ) ; +#43141 = ORIENTED_EDGE ( 'NONE', *, *, #22916, .T. ) ; +#43142 = AXIS2_PLACEMENT_3D ( 'NONE', #52439, #2957, #46443 ) ; +#43143 = FACE_OUTER_BOUND ( 'NONE', #46761, .T. ) ; +#43144 = EDGE_LOOP ( 'NONE', ( #38543, #57742, #25298 ) ) ; +#43145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43146 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 55.33333333333334300, -10.73183747965883100 ) ) ; +#43147 = VERTEX_POINT ( 'NONE', #45458 ) ; +#43148 = ORIENTED_EDGE ( 'NONE', *, *, #79196, .F. ) ; +#43149 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57526, #32760, #70019, #38993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350707512100E-007, 0.0007670609591623636500 ), + .UNSPECIFIED. ) ; +#43150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43151 = EDGE_LOOP ( 'NONE', ( #51607, #52667, #76649, #7068 ) ) ; +#43152 = VECTOR ( 'NONE', #50715, 1000.000000000000000 ) ; +#43153 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 20.50000000000000700, 2.454695999814380200 ) ) ; +#43154 = ORIENTED_EDGE ( 'NONE', *, *, #30484, .T. ) ; +#43155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43157 = ORIENTED_EDGE ( 'NONE', *, *, #32709, .T. ) ; +#43158 = ORIENTED_EDGE ( 'NONE', *, *, #27852, .F. ) ; +#43159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43160 = ORIENTED_EDGE ( 'NONE', *, *, #47596, .F. ) ; +#43161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43162 = FACE_OUTER_BOUND ( 'NONE', #2484, .T. ) ; +#43163 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 22.83333333333334300, -4.152999154772353500 ) ) ; +#43164 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655522100, 31.17701665379217600, -28.20555803802996000 ) ) ; +#43165 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#43166 = CARTESIAN_POINT ( 'NONE', ( -8.314034490221681400, 14.04999999999997600, -28.37321477197626900 ) ) ; +#43167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43168 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458390800, 20.01125751638927500, -28.53740755999534400 ) ) ; +#43169 = FACE_OUTER_BOUND ( 'NONE', #25378, .T. ) ; +#43170 = EDGE_CURVE ( 'NONE', #79252, #35281, #18948, .T. ) ; +#43171 = CARTESIAN_POINT ( 'NONE', ( -10.24297557446557700, 60.16517473503391500, -28.29551658696701800 ) ) ; +#43172 = EDGE_CURVE ( 'NONE', #45054, #38144, #5827, .T. ) ; +#43173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43177 = ORIENTED_EDGE ( 'NONE', *, *, #31292, .F. ) ; +#43176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43178 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#43179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43180 = EDGE_LOOP ( 'NONE', ( #46764, #10227, #49147 ) ) ; +#43181 = EDGE_CURVE ( 'NONE', #42834, #34790, #72171, .T. ) ; +#43182 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42323, #79621, #61142, #23872 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122924602700, 0.0007303749718171205900 ), + .UNSPECIFIED. ) ; +#43183 = ADVANCED_FACE ( 'NONE', ( #64730 ), #60813, .F. ) ; +#43184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43185 = EDGE_CURVE ( 'NONE', #78759, #74175, #57679, .T. ) ; +#43186 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43187 = LINE ( 'NONE', #41672, #4259 ) ; +#43188 = ORIENTED_EDGE ( 'NONE', *, *, #54410, .F. ) ; +#43189 = AXIS2_PLACEMENT_3D ( 'NONE', #61933, #24649, #68159 ) ; +#43190 = CIRCLE ( 'NONE', #50247, 10.50000000000009600 ) ; +#43191 = ORIENTED_EDGE ( 'NONE', *, *, #77874, .F. ) ; +#43192 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 26.33333333333334600, -5.205558038030008400 ) ) ; +#43193 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43194 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957539200, 27.50972971738994100, -28.70555803802994500 ) ) ; +#43195 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54335, #17099, #73128, #35855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635347222000E-007, 0.0008082706238602455100 ), + .UNSPECIFIED. ) ; +#43196 = CONICAL_SURFACE ( 'NONE', #21960, 10.50000000000009600, 0.7853981633974500600 ) ; +#43197 = CONICAL_SURFACE ( 'NONE', #50212, 10.50000000000009600, 0.7853981633974500600 ) ; +#43198 = ORIENTED_EDGE ( 'NONE', *, *, #19878, .T. ) ; +#43199 = ORIENTED_EDGE ( 'NONE', *, *, #36537, .F. ) ; +#43200 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21311, #46267, #65112, #27847 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.189061588081962300E-016, 0.001179148174667011400 ), + .UNSPECIFIED. ) ; +#43201 = VERTEX_POINT ( 'NONE', #39781 ) ; +#43202 = ADVANCED_FACE ( 'NONE', ( #77333 ), #27722, .T. ) ; +#43203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43204 = AXIS2_PLACEMENT_3D ( 'NONE', #46827, #9586, #53096 ) ; +#43205 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43206 = EDGE_CURVE ( 'NONE', #51468, #7744, #44195, .T. ) ; +#43207 = EDGE_CURVE ( 'NONE', #69303, #13589, #13133, .T. ) ; +#43208 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823716300, 10.90456253568389200, -28.61277292027073600 ) ) ; +#43209 = EDGE_CURVE ( 'NONE', #54555, #65963, #43200, .T. ) ; +#43210 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56076, #18824, #25083, #68602 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972909018566600E-007, 0.0005865296644901219100 ), + .UNSPECIFIED. ) ; +#43212 = FACE_OUTER_BOUND ( 'NONE', #51586, .T. ) ; +#43211 = AXIS2_PLACEMENT_3D ( 'NONE', #3673, #71705, #16210 ) ; +#43213 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881600, 60.16616330387870400, -28.27375072930956200 ) ) ; +#43214 = EDGE_LOOP ( 'NONE', ( #3795, #73267, #68972, #78421, #2013 ) ) ; +#43215 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43216 = FACE_OUTER_BOUND ( 'NONE', #72890, .T. ) ; +#43217 = AXIS2_PLACEMENT_3D ( 'NONE', #17600, #23857, #29872 ) ; +#43218 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000034200, 40.90050506338820900, -28.70555803802997700 ) ) ; +#43219 = ORIENTED_EDGE ( 'NONE', *, *, #27282, .F. ) ; +#43220 = ADVANCED_FACE ( 'NONE', ( #31619 ), #42267, .F. ) ; +#43221 = EDGE_LOOP ( 'NONE', ( #28097, #59136, #46608, #8357 ) ) ; +#43222 = ORIENTED_EDGE ( 'NONE', *, *, #49253, .T. ) ; +#43223 = ORIENTED_EDGE ( 'NONE', *, *, #16902, .F. ) ; +#43224 = AXIS2_PLACEMENT_3D ( 'NONE', #32243, #38195, #13499 ) ; +#43225 = ORIENTED_EDGE ( 'NONE', *, *, #14998, .F. ) ; +#43226 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#43227 = EDGE_CURVE ( 'NONE', #39939, #60512, #28811, .T. ) ; +#43228 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 10.00000000000000000, -28.70555803803001300 ) ) ; +#43229 = FACE_OUTER_BOUND ( 'NONE', #30073, .T. ) ; +#43230 = AXIS2_PLACEMENT_3D ( 'NONE', #63317, #26052, #69540 ) ; +#43231 = AXIS2_PLACEMENT_3D ( 'NONE', #46531, #9289, #52813 ) ; +#43232 = ORIENTED_EDGE ( 'NONE', *, *, #3994, .F. ) ; +#43233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43234 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609685300, 60.13716795162641700, -28.48697406221641200 ) ) ; +#43235 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43236 = ADVANCED_FACE ( 'NONE', ( #58828 ), #9170, .F. ) ; +#43237 = EDGE_LOOP ( 'NONE', ( #20180, #80391, #2308, #35411 ) ) ; +#43238 = ORIENTED_EDGE ( 'NONE', *, *, #2312, .T. ) ; +#43239 = ORIENTED_EDGE ( 'NONE', *, *, #4946, .T. ) ; +#43240 = CONICAL_SURFACE ( 'NONE', #61726, 10.50000000000009600, 0.7853981633974500600 ) ; +#43241 = AXIS2_PLACEMENT_3D ( 'NONE', #52174, #14946, #58468 ) ; +#43243 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53556, #15756, #59552, #16300 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885673928396800E-007, 0.0007987728781051958700 ), + .UNSPECIFIED. ) ; +#43242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43244 = ADVANCED_FACE ( 'NONE', ( #79298 ), #56893, .T. ) ; +#43245 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 70.00000000000001400, -6.205558038030003100 ) ) ; +#43246 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43438, #49670, #62241, #68481 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930420500E-018, 0.001333132141653069600 ), + .UNSPECIFIED. ) ; +#43247 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43248 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 35.00000000000000000, -9.205558038030005700 ) ) ; +#43249 = AXIS2_PLACEMENT_3D ( 'NONE', #9219, #52753, #15512 ) ; +#43250 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#43251 = CIRCLE ( 'NONE', #73655, 10.00000000000009600 ) ; +#43252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43253 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 0.1666666666666910300, 6.794441961969992500 ) ) ; +#43254 = EDGE_LOOP ( 'NONE', ( #52072, #33943, #59542 ) ) ; +#43255 = AXIS2_PLACEMENT_3D ( 'NONE', #26351, #69824, #32564 ) ; +#43256 = VERTEX_POINT ( 'NONE', #40582 ) ; +#43257 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.66749699759768400, -28.20555803802994200 ) ) ; +#43258 = VERTEX_POINT ( 'NONE', #3315 ) ; +#43259 = EDGE_CURVE ( 'NONE', #29841, #40425, #14304, .T. ) ; +#43260 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#43261 = CIRCLE ( 'NONE', #59435, 9.500000000000101300 ) ; +#43262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43263 = CONICAL_SURFACE ( 'NONE', #9026, 10.50000000000009200, 0.7853981633974482800 ) ; +#43264 = AXIS2_PLACEMENT_3D ( 'NONE', #13385, #19337, #75374 ) ; +#43265 = EDGE_LOOP ( 'NONE', ( #76062, #60951, #1477, #7386, #28225 ) ) ; +#43266 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408273800, 41.21413374642156000, -28.27331438134757100 ) ) ; +#43267 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#43268 = ORIENTED_EDGE ( 'NONE', *, *, #40192, .T. ) ; +#43269 = CIRCLE ( 'NONE', #34959, 10.50000000000009200 ) ; +#43270 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43271 = CONICAL_SURFACE ( 'NONE', #42371, 10.50000000000009600, 0.7853981633974500600 ) ; +#43272 = ORIENTED_EDGE ( 'NONE', *, *, #18819, .T. ) ; +#43273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43275 = EDGE_LOOP ( 'NONE', ( #46863, #55428, #25913, #7684 ) ) ; +#43274 = CARTESIAN_POINT ( 'NONE', ( -3.073479299796793900E-014, 67.70389005397385100, -28.37519436813192500 ) ) ; +#43276 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305487800, 59.70395328581638900, -28.70555803803001600 ) ) ; +#43277 = CARTESIAN_POINT ( 'NONE', ( 15.02628644574478900, 75.88243067206823900, -28.70555803803001600 ) ) ; +#43278 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#43279 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853718400, 60.34267608797617300, -28.20555803803014400 ) ) ; +#43280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43281 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.93250300240229200, -28.20555803802996700 ) ) ; +#43282 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 60.79999999999998300, -28.55171188418376700 ) ) ; +#43283 = CONICAL_SURFACE ( 'NONE', #2823, 10.00000000000009200, 0.7853981633974447300 ) ; +#43284 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784445100, 55.79999999999974800, -28.20555803803014400 ) ) ; +#43285 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43286 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#43287 = ORIENTED_EDGE ( 'NONE', *, *, #7563, .F. ) ; +#43288 = FACE_OUTER_BOUND ( 'NONE', #20290, .T. ) ; +#43289 = EDGE_CURVE ( 'NONE', #62053, #21465, #80613, .T. ) ; +#43290 = ORIENTED_EDGE ( 'NONE', *, *, #6519, .F. ) ; +#43291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61478, #17932, #73973, #36687 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213599292500E-007, 0.0008724366121414536100 ), + .UNSPECIFIED. ) ; +#43292 = ORIENTED_EDGE ( 'NONE', *, *, #47815, .F. ) ; +#43293 = EDGE_CURVE ( 'NONE', #44558, #77660, #66173, .T. ) ; +#43294 = CARTESIAN_POINT ( 'NONE', ( 1.851846210996574500, 85.79999999999998300, -28.37148172714593400 ) ) ; +#43295 = ORIENTED_EDGE ( 'NONE', *, *, #42292, .F. ) ; +#43296 = ORIENTED_EDGE ( 'NONE', *, *, #41097, .F. ) ; +#43297 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#43298 = ORIENTED_EDGE ( 'NONE', *, *, #8149, .F. ) ; +#43299 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428622700, 28.57141756547896000, -28.70555803802994200 ) ) ; +#43300 = CIRCLE ( 'NONE', #21500, 9.500000000000099500 ) ; +#43301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43302 = ORIENTED_EDGE ( 'NONE', *, *, #75849, .T. ) ; +#43303 = ORIENTED_EDGE ( 'NONE', *, *, #16722, .T. ) ; +#43304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43305 = EDGE_CURVE ( 'NONE', #39861, #71059, #51650, .T. ) ; +#43306 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 81.46283204837340000, -28.48697406221667100 ) ) ; +#43307 = EDGE_CURVE ( 'NONE', #76903, #62355, #37212, .T. ) ; +#43309 = ORIENTED_EDGE ( 'NONE', *, *, #77651, .F. ) ; +#43308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62982, #50406, #56992, #19722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691576175700E-007, 0.0008724363063893237200 ), + .UNSPECIFIED. ) ; +#43310 = ORIENTED_EDGE ( 'NONE', *, *, #50072, .T. ) ; +#43311 = AXIS2_PLACEMENT_3D ( 'NONE', #62842, #69082, #19299 ) ; +#43312 = ORIENTED_EDGE ( 'NONE', *, *, #78161, .T. ) ; +#43313 = ADVANCED_FACE ( 'NONE', ( #75395 ), #23817, .T. ) ; +#43314 = CONICAL_SURFACE ( 'NONE', #78896, 10.00000000000009400, 0.7853981633974447300 ) ; +#43315 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 47.10073525436786200, -28.70555803802996700 ) ) ; +#43316 = ADVANCED_FACE ( 'NONE', ( #46161 ), #59914, .T. ) ; +#43317 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 41.00000000000000700, -1.205558038030005300 ) ) ; +#43318 = CARTESIAN_POINT ( 'NONE', ( 10.03177803894799800, 70.28233213024626000, -28.25051428653864600 ) ) ; +#43319 = AXIS2_PLACEMENT_3D ( 'NONE', #59018, #21773, #65325 ) ; +#43320 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24772, #68278, #43501, #6263 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405670120295100E-007, 0.0007670610367941764100 ), + .UNSPECIFIED. ) ; +#43321 = EDGE_CURVE ( 'NONE', #42914, #9036, #22784, .T. ) ; +#43322 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 57.94142842854297700, -28.20555803802997700 ) ) ; +#43323 = EDGE_CURVE ( 'NONE', #76953, #36928, #8273, .T. ) ; +#43324 = EDGE_CURVE ( 'NONE', #21218, #69612, #74638, .T. ) ; +#43325 = CARTESIAN_POINT ( 'NONE', ( -15.05230528786075400, 55.75869881725289200, -28.70545453106903000 ) ) ; +#43326 = ADVANCED_FACE ( 'NONE', ( #25770 ), #54932, .F. ) ; +#43327 = AXIS2_PLACEMENT_3D ( 'NONE', #73727, #61502, #11723 ) ; +#43328 = VECTOR ( 'NONE', #25548, 1000.000000000000000 ) ; +#43329 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609213600, 35.68533208989798300, -28.53910738522640500 ) ) ; +#43330 = EDGE_CURVE ( 'NONE', #65079, #31952, #71490, .T. ) ; +#43331 = ORIENTED_EDGE ( 'NONE', *, *, #8851, .T. ) ; +#43332 = FACE_OUTER_BOUND ( 'NONE', #50341, .T. ) ; +#43333 = AXIS2_PLACEMENT_3D ( 'NONE', #11548, #36277, #61336 ) ; +#43334 = AXIS2_PLACEMENT_3D ( 'NONE', #54588, #60863, #23601 ) ; +#43335 = ORIENTED_EDGE ( 'NONE', *, *, #39014, .F. ) ; +#43336 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#43337 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79527, #10730, #48206, #42221 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.008791465289790228300, 0.008828470447790963800 ), + .UNSPECIFIED. ) ; +#43338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43341 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 12.33333333333335500, 4.294441961970000500 ) ) ; +#43342 = FACE_OUTER_BOUND ( 'NONE', #6281, .T. ) ; +#43343 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#43344 = CIRCLE ( 'NONE', #42880, 9.500000000000099500 ) ; +#43345 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#43346 = VERTEX_POINT ( 'NONE', #48992 ) ; +#43347 = CONICAL_SURFACE ( 'NONE', #14567, 10.50000000000009600, 0.7853981633974518300 ) ; +#43348 = ORIENTED_EDGE ( 'NONE', *, *, #54737, .F. ) ; +#43349 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274329800, 33.16464174796072900, -28.53896444442200000 ) ) ; +#43350 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 41.24660241562182300, -28.20555803802996700 ) ) ; +#43351 = ORIENTED_EDGE ( 'NONE', *, *, #17631, .F. ) ; +#43352 = AXIS2_PLACEMENT_3D ( 'NONE', #66464, #72726, #22936 ) ; +#43353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43354 = CIRCLE ( 'NONE', #7113, 10.00000000000009200 ) ; +#43355 = CONICAL_SURFACE ( 'NONE', #7475, 10.50000000000009600, 0.7853981633974500600 ) ; +#43356 = AXIS2_PLACEMENT_3D ( 'NONE', #2894, #46377, #9129 ) ; +#43357 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43358 = EDGE_LOOP ( 'NONE', ( #32339, #53441, #63280, #50898 ) ) ; +#43359 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43360 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 46.83333333333333600, -6.205558038030004800 ) ) ; +#43361 = ORIENTED_EDGE ( 'NONE', *, *, #22813, .T. ) ; +#43362 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899329400, 31.47636006919909200, -28.38670679782167000 ) ) ; +#43363 = EDGE_CURVE ( 'NONE', #31298, #47732, #40323, .T. ) ; +#43364 = ORIENTED_EDGE ( 'NONE', *, *, #68226, .F. ) ; +#43365 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.43250300240229200, -28.20555803802997700 ) ) ; +#43366 = AXIS2_PLACEMENT_3D ( 'NONE', #11285, #54779, #17544 ) ; +#43367 = ORIENTED_EDGE ( 'NONE', *, *, #36748, .T. ) ; +#43368 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43369 = ORIENTED_EDGE ( 'NONE', *, *, #4228, .T. ) ; +#43370 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996100, 10.68315603019281900, -28.70555803802998100 ) ) ; +#43371 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43372 = FACE_OUTER_BOUND ( 'NONE', #46289, .T. ) ; +#43373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43374 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 59.91070809551060700, -28.20555803802997700 ) ) ; +#43375 = AXIS2_PLACEMENT_3D ( 'NONE', #44049, #75110, #56597 ) ; +#43377 = ORIENTED_EDGE ( 'NONE', *, *, #49235, .F. ) ; +#43376 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#43378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43379 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661482600, 31.10677350908857300, -28.30799595738881900 ) ) ; +#43380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18713, #30699, #74741, #37440 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001492013864177411000 ), + .UNSPECIFIED. ) ; +#43381 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43382 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#43383 = CIRCLE ( 'NONE', #14877, 9.500000000000099500 ) ; +#43384 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#43385 = CARTESIAN_POINT ( 'NONE', ( 0.7591890557628392400, 50.54999999999999700, -28.47662666514796100 ) ) ; +#43386 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803803001300 ) ) ; +#43387 = AXIS2_PLACEMENT_3D ( 'NONE', #12739, #56217, #18960 ) ; +#43388 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180452700, 71.65075715145293600, -28.20555803802997700 ) ) ; +#43389 = ORIENTED_EDGE ( 'NONE', *, *, #74684, .T. ) ; +#43390 = CIRCLE ( 'NONE', #70992, 9.500000000000099500 ) ; +#43391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43393 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43394 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#43395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43397 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#43398 = VERTEX_POINT ( 'NONE', #80315 ) ; +#43399 = ADVANCED_FACE ( 'NONE', ( #15051 ), #69521, .T. ) ; +#43400 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21298, #71325, #9288, #52811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904305303700E-007, 0.0006651184466334838000 ), + .UNSPECIFIED. ) ; +#43401 = EDGE_CURVE ( 'NONE', #54616, #6780, #60190, .T. ) ; +#43402 = FACE_OUTER_BOUND ( 'NONE', #15839, .T. ) ; +#43403 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 53.16666666666667900, 9.794441961969994300 ) ) ; +#43404 = EDGE_CURVE ( 'NONE', #39864, #7698, #45656, .T. ) ; +#43405 = CIRCLE ( 'NONE', #43091, 9.500000000000099500 ) ; +#43406 = ORIENTED_EDGE ( 'NONE', *, *, #48383, .T. ) ; +#43407 = ADVANCED_FACE ( 'NONE', ( #5296 ), #36428, .T. ) ; +#43408 = CIRCLE ( 'NONE', #8711, 10.00000000000009200 ) ; +#43409 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 18.33333333333333900, -5.535685056952199400 ) ) ; +#43410 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432849900, 28.85339758437810100, -28.20555803802994200 ) ) ; +#43411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21250, #46214, #65048, #27783 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914292844000E-007, 0.0008482521192577297500 ), + .UNSPECIFIED. ) ; +#43412 = EDGE_CURVE ( 'NONE', #59983, #38012, #52968, .T. ) ; +#43413 = VERTEX_POINT ( 'NONE', #74603 ) ; +#43414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43415 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528700, 24.54999999999997600, -28.20555803802994200 ) ) ; +#43416 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#43417 = CIRCLE ( 'NONE', #51991, 9.500000000000095900 ) ; +#43418 = VECTOR ( 'NONE', #64344, 1000.000000000000000 ) ; +#43419 = EDGE_CURVE ( 'NONE', #46378, #8272, #31262, .T. ) ; +#43420 = EDGE_LOOP ( 'NONE', ( #67454, #79702, #28161, #8155 ) ) ; +#43421 = EDGE_CURVE ( 'NONE', #25364, #61765, #16799, .T. ) ; +#43422 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732831200, 59.66414768973982100, -28.38420446581345000 ) ) ; +#43423 = CARTESIAN_POINT ( 'NONE', ( 2.768442304073548400E-015, 57.70389005397400000, -28.37519436813179800 ) ) ; +#43424 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 20.66666666666667500, 4.294441961969993400 ) ) ; +#43425 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16128, #59660, #34907, #78425 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795729100 ), + .UNSPECIFIED. ) ; +#43426 = VERTEX_POINT ( 'NONE', #62358 ) ; +#43427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43428 = ORIENTED_EDGE ( 'NONE', *, *, #3189, .T. ) ; +#43429 = AXIS2_PLACEMENT_3D ( 'NONE', #38880, #45123, #32661 ) ; +#43430 = EDGE_CURVE ( 'NONE', #368, #36616, #21849, .T. ) ; +#43431 = EDGE_CURVE ( 'NONE', #5611, #69715, #7225, .T. ) ; +#43432 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#43433 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199500, 60.34267608797601000, -28.20555803802997700 ) ) ; +#43434 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22807, #16558, #66068, #66324 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278955367200, 0.001517194977238209800 ), + .UNSPECIFIED. ) ; +#43435 = EDGE_CURVE ( 'NONE', #25284, #62959, #38361, .T. ) ; +#43436 = ADVANCED_FACE ( 'NONE', ( #11174 ), #50057, .T. ) ; +#43437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43438 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 60.24722181384566300, -28.70555803802999500 ) ) ; +#43439 = ORIENTED_EDGE ( 'NONE', *, *, #7328, .T. ) ; +#43440 = AXIS2_PLACEMENT_3D ( 'NONE', #36255, #79785, #42495 ) ; +#43441 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43442 = ORIENTED_EDGE ( 'NONE', *, *, #62891, .T. ) ; +#43443 = VERTEX_POINT ( 'NONE', #25648 ) ; +#43444 = ORIENTED_EDGE ( 'NONE', *, *, #19274, .F. ) ; +#43445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43446 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344307300, 31.17701665379242100, -28.20555803802996000 ) ) ; +#43447 = VERTEX_POINT ( 'NONE', #19358 ) ; +#43448 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044600, 82.51973550835663200, -28.70555803802997400 ) ) ; +#43449 = CONICAL_SURFACE ( 'NONE', #79242, 10.00000000000009200, 0.7853981633974415100 ) ; +#43450 = AXIS2_PLACEMENT_3D ( 'NONE', #58174, #20936, #64472 ) ; +#43451 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991700, 19.29999999999999000, -28.70555803802994200 ) ) ; +#43452 = AXIS2_PLACEMENT_3D ( 'NONE', #72491, #29014, #35241 ) ; +#43453 = ORIENTED_EDGE ( 'NONE', *, *, #75061, .T. ) ; +#43454 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#43455 = AXIS2_PLACEMENT_3D ( 'NONE', #36353, #73635, #60868 ) ; +#43456 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#43457 = VERTEX_POINT ( 'NONE', #62905 ) ; +#43458 = FACE_OUTER_BOUND ( 'NONE', #74821, .T. ) ; +#43459 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260092300, 18.20034312068823100, -28.70555803803001300 ) ) ; +#43460 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 24.16666666666667100, 0.9380355014189834000 ) ) ; +#43461 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171144800, 29.79999999999999000, -28.57107744631859000 ) ) ; +#43462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43463 = ORIENTED_EDGE ( 'NONE', *, *, #38150, .T. ) ; +#43464 = CIRCLE ( 'NONE', #36547, 9.500000000000099500 ) ; +#43465 = CONICAL_SURFACE ( 'NONE', #42308, 10.00000000000009200, 0.7853981633974447300 ) ; +#43466 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43467 = AXIS2_PLACEMENT_3D ( 'NONE', #15236, #58745, #21514 ) ; +#43468 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43469 = EDGE_CURVE ( 'NONE', #79838, #506, #67587, .T. ) ; +#43470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43471 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#43472 = ORIENTED_EDGE ( 'NONE', *, *, #60792, .F. ) ; +#43473 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9199, #34245, #52991, #15746, #59264, #22009, #65552, #28305, #71791, #34533, #78031, #40757, #3482, #46985, #9770, #53270, #16024, #59544, #22275, #65804, #28571, #72072, #34805, #78317, #41032, #3754, #47255, #10030, #53550, #16296, #59824, #22542, #66076, #28846, #72337, #35083, #78595, #41297, #4036, #47521, #10303, #53804, #16567, #60093, #22816, #66334, #29119, #72598, #35346, #78867, #41570, #4307, #47790, #10572, #54071, #16827, #60365, #23090, #66603, #29378, #72861, #35599, #79118, #41826, #4574, #48062, #10837, #54334, #17098, #60622, #23352, #66872, #29633, #73127, #35854, #79381, #42081, #4833, #48333, #11113, #54609, #17359, #60897, #23620, #67134, #29914, #73396, #36125, #79641, #42353 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.465505300536223300E-017, 8.738589668147409900E-005, 0.0001747717933629235600, 0.0003495435867258198000, 0.0006990871734516090200, 0.001398174346903190100, 0.002097261520354771000, 0.002796348693806351500, 0.004194523040709511600, 0.005592697387612671800, 0.006990871734515832800, 0.008389046081418992000, 0.009787220428322153000, 0.01118539477522531200, 0.01188448194867689300, 0.01258356912212847300, 0.01398174346903163300, 0.01537991781593479000, 0.01677809216283795300, 0.01817626650974111400, 0.01957444085664427500, 0.02097261520354743600, 0.02237078955045059700, 0.02376896389735375800, 0.02446805107080533800, 0.02516713824425691900, 0.02796348693806324100, 0.03075983563186956300, 0.03145892280532114300, 0.03215800997877272400, 0.03355618432567588500, 0.03495435867257904600, 0.03635253301948220700, 0.03705162019293378700, 0.03775070736638536800, 0.03914888171328852900, 0.04054705606019169000, 0.04194523040709485100, 0.04264431758054643100, 0.04334340475399801200, 0.04404249192744959200, 0.04439203551417537900, 0.04456680730753828000, 0.04465419320421973300, 0.04474157910090118000 ), + .UNSPECIFIED. ) ; +#43474 = CARTESIAN_POINT ( 'NONE', ( 3.121412514500169000, 51.76337688193807200, -28.37223523914928300 ) ) ; +#43475 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#43476 = FACE_OUTER_BOUND ( 'NONE', #23198, .T. ) ; +#43477 = ORIENTED_EDGE ( 'NONE', *, *, #33715, .T. ) ; +#43478 = EDGE_CURVE ( 'NONE', #6326, #77643, #73451, .T. ) ; +#43479 = CIRCLE ( 'NONE', #26927, 9.500000000000097700 ) ; +#43480 = AXIS2_PLACEMENT_3D ( 'NONE', #51036, #13840, #57332 ) ; +#43481 = ORIENTED_EDGE ( 'NONE', *, *, #56784, .T. ) ; +#43482 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155513200, 65.79999999999968500, -28.20555803803030800 ) ) ; +#43483 = EDGE_LOOP ( 'NONE', ( #29087, #38036, #10994 ) ) ; +#43484 = ORIENTED_EDGE ( 'NONE', *, *, #55584, .F. ) ; +#43485 = CIRCLE ( 'NONE', #56621, 9.500000000000099500 ) ; +#43486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43487 = ORIENTED_EDGE ( 'NONE', *, *, #22022, .T. ) ; +#43488 = CARTESIAN_POINT ( 'NONE', ( -15.31403449022167800, 35.04999999999996900, -28.37321477197629700 ) ) ; +#43489 = ADVANCED_FACE ( 'NONE', ( #50992 ), #49045, .T. ) ; +#43490 = CONICAL_SURFACE ( 'NONE', #6635, 10.50000000000009600, 0.7853981633974500600 ) ; +#43491 = AXIS2_PLACEMENT_3D ( 'NONE', #56519, #19261, #13030 ) ; +#43492 = FACE_OUTER_BOUND ( 'NONE', #24297, .T. ) ; +#43493 = EDGE_LOOP ( 'NONE', ( #3484, #30173, #8380, #29546 ) ) ; +#43494 = CARTESIAN_POINT ( 'NONE', ( 11.23081175365658300, 80.94994472024578200, -28.43636979168714200 ) ) ; +#43495 = ORIENTED_EDGE ( 'NONE', *, *, #31201, .T. ) ; +#43496 = ADVANCED_FACE ( 'NONE', ( #34506 ), #16000, .F. ) ; +#43497 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 67.83333333333335700, 3.794441961969996900 ) ) ; +#43498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38857, #1609, #39127, #1870 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.250926888277100300E-017, 0.001871986839425514100 ), + .UNSPECIFIED. ) ; +#43499 = AXIS2_PLACEMENT_3D ( 'NONE', #2666, #46183, #8913 ) ; +#43500 = CARTESIAN_POINT ( 'NONE', ( -3.073491842515278600, 90.22161678501176100, -28.29547179040452000 ) ) ; +#43501 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499898100, 79.83662311806175200, -28.37223523914903100 ) ) ; +#43502 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 32.83333333333335000, 6.794441961969992500 ) ) ; +#43503 = CONICAL_SURFACE ( 'NONE', #78158, 10.50000000000009600, 0.7853981633974518300 ) ; +#43504 = CIRCLE ( 'NONE', #51656, 10.00000000000009200 ) ; +#43505 = CARTESIAN_POINT ( 'NONE', ( 9.813460021729298400, 6.877501000800541500, -28.20555803802992800 ) ) ; +#43506 = ORIENTED_EDGE ( 'NONE', *, *, #27283, .F. ) ; +#43507 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714285600, 12.17681279774500400, -28.70555803802994200 ) ) ; +#43508 = EDGE_CURVE ( 'NONE', #25861, #32608, #2290, .T. ) ; +#43509 = EDGE_LOOP ( 'NONE', ( #675, #16474, #62428, #19421 ) ) ; +#43510 = ADVANCED_FACE ( 'NONE', ( #19910 ), #63707, .F. ) ; +#43511 = ADVANCED_FACE ( 'NONE', ( #3329 ), #30614, .F. ) ; +#43512 = VERTEX_POINT ( 'NONE', #44865 ) ; +#43513 = ORIENTED_EDGE ( 'NONE', *, *, #50653, .F. ) ; +#43514 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 70.16666666666668600, -12.20555803803000000 ) ) ; +#43515 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52017, #27335, #46039, #8778 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898871800 ), + .UNSPECIFIED. ) ; +#43516 = ORIENTED_EDGE ( 'NONE', *, *, #8028, .F. ) ; +#43517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43518 = VERTEX_POINT ( 'NONE', #13930 ) ; +#43519 = ORIENTED_EDGE ( 'NONE', *, *, #68834, .T. ) ; +#43520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43521 = ADVANCED_FACE ( 'NONE', ( #32534 ), #78297, .T. ) ; +#43522 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489637100, 18.15930907398619700, -28.35186440610855000 ) ) ; +#43523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#43524 = CONICAL_SURFACE ( 'NONE', #79954, 10.50000000000009600, 0.7853981633974500600 ) ; +#43525 = EDGE_CURVE ( 'NONE', #9002, #39293, #14049, .T. ) ; +#43527 = EDGE_CURVE ( 'NONE', #8567, #31596, #1379, .T. ) ; +#43526 = ORIENTED_EDGE ( 'NONE', *, *, #4255, .T. ) ; +#43528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43529 = ORIENTED_EDGE ( 'NONE', *, *, #67184, .T. ) ; +#43530 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#43531 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#43532 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43533 = CARTESIAN_POINT ( 'NONE', ( 17.41542217839997500, 71.18375493410854900, -28.40985430318291400 ) ) ; +#43534 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000000400, 81.43250300240228500, -28.20555803802997700 ) ) ; +#43535 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#43536 = CIRCLE ( 'NONE', #72028, 10.00000000000009600 ) ; +#43537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43539 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#43540 = AXIS2_PLACEMENT_3D ( 'NONE', #17491, #35711, #67251 ) ; +#43541 = EDGE_CURVE ( 'NONE', #34228, #31241, #68643, .T. ) ; +#43542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43543 = EDGE_CURVE ( 'NONE', #63749, #29376, #54164, .T. ) ; +#43544 = CARTESIAN_POINT ( 'NONE', ( -16.52200773131486100, 9.976935235925044100, -28.54785533206973700 ) ) ; +#43545 = EDGE_LOOP ( 'NONE', ( #68434, #11304, #70388 ) ) ; +#43546 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39805, #77069, #2792, #46290 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674730726849000E-007, 0.0002745102201808982500 ), + .UNSPECIFIED. ) ; +#43547 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#43548 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708531400, 55.80000000000008200, -28.63843632546336300 ) ) ; +#43549 = EDGE_CURVE ( 'NONE', #5467, #67444, #39710, .T. ) ; +#43550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43552 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492377200, 10.52620220503713400, -28.70555803802992800 ) ) ; +#43553 = CIRCLE ( 'NONE', #29722, 10.50000000000009600 ) ; +#43554 = ORIENTED_EDGE ( 'NONE', *, *, #64916, .T. ) ; +#43555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43556 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 77.94142842854297700, -28.20555803802997700 ) ) ; +#43557 = FACE_OUTER_BOUND ( 'NONE', #73602, .T. ) ; +#43558 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.86203212531320600, -28.38801640354856200 ) ) ; +#43559 = AXIS2_PLACEMENT_3D ( 'NONE', #67604, #49066, #24097 ) ; +#43560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43561 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105216200, 70.28233213024648800, -28.25051428653847600 ) ) ; +#43562 = AXIS2_PLACEMENT_3D ( 'NONE', #28464, #59433, #22169 ) ; +#43563 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#43564 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#43565 = VERTEX_POINT ( 'NONE', #1914 ) ; +#43566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51477, #7978, #64056, #26786 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001827376358595688400 ), + .UNSPECIFIED. ) ; +#43567 = CONICAL_SURFACE ( 'NONE', #32267, 10.00000000000009400, 0.7853981633974447300 ) ; +#43568 = ORIENTED_EDGE ( 'NONE', *, *, #54119, .T. ) ; +#43569 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 46.48096581827314100, -28.69431509262337700 ) ) ; +#43570 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 38.83333333333334300, -3.349151577478984600 ) ) ; +#43571 = ORIENTED_EDGE ( 'NONE', *, *, #21074, .T. ) ; +#43572 = AXIS2_PLACEMENT_3D ( 'NONE', #1126, #44609, #7382 ) ; +#43573 = EDGE_CURVE ( 'NONE', #13752, #22567, #47099, .T. ) ; +#43574 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828104900, 90.46231468379673400, -28.37082013777818500 ) ) ; +#43575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43576 = ADVANCED_FACE ( 'NONE', ( #80229 ), #59801, .T. ) ; +#43577 = CIRCLE ( 'NONE', #73367, 10.00000000000009200 ) ; +#43578 = CIRCLE ( 'NONE', #22991, 10.00000000000009200 ) ; +#43579 = ORIENTED_EDGE ( 'NONE', *, *, #63840, .T. ) ; +#43580 = VERTEX_POINT ( 'NONE', #8435 ) ; +#43581 = ORIENTED_EDGE ( 'NONE', *, *, #45427, .T. ) ; +#43582 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43583 = EDGE_CURVE ( 'NONE', #11856, #75213, #25270, .T. ) ; +#43584 = ORIENTED_EDGE ( 'NONE', *, *, #17737, .F. ) ; +#43585 = EDGE_LOOP ( 'NONE', ( #79832, #3081, #30874 ) ) ; +#43586 = AXIS2_PLACEMENT_3D ( 'NONE', #5989, #12255, #43235 ) ; +#43587 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39011, #76284, #8008, #51506 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200802305500, 0.0008866563355347495000 ), + .UNSPECIFIED. ) ; +#43588 = ORIENTED_EDGE ( 'NONE', *, *, #74459, .F. ) ; +#43589 = ORIENTED_EDGE ( 'NONE', *, *, #49860, .T. ) ; +#43590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43591 = ADVANCED_FACE ( 'NONE', ( #12097 ), #26712, .T. ) ; +#43592 = VERTEX_POINT ( 'NONE', #76993 ) ; +#43593 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252732000, 18.13131911501820400, -28.51286550264586600 ) ) ; +#43594 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#43595 = CARTESIAN_POINT ( 'NONE', ( 3.959731041493580700, 41.37561462481246400, -28.30309985153377300 ) ) ; +#43596 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956700, 71.49747404049692500, -28.26641963845900200 ) ) ; +#43597 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 10.16666666666667100, -4.152999154772358800 ) ) ; +#43598 = CIRCLE ( 'NONE', #70958, 10.50000000000009600 ) ; +#43599 = AXIS2_PLACEMENT_3D ( 'NONE', #12682, #62441, #49878 ) ; +#43601 = ORIENTED_EDGE ( 'NONE', *, *, #38644, .F. ) ; +#43600 = CARTESIAN_POINT ( 'NONE', ( 17.30183166260287900, 59.84162552338041500, -28.43755849160219600 ) ) ; +#43602 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655676200, 28.42298334620756600, -28.20555803802994500 ) ) ; +#43603 = ORIENTED_EDGE ( 'NONE', *, *, #66680, .T. ) ; +#43604 = ADVANCED_FACE ( 'NONE', ( #17952 ), #74393, .F. ) ; +#43605 = ORIENTED_EDGE ( 'NONE', *, *, #63842, .F. ) ; +#43606 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43607 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#43608 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43609 = CIRCLE ( 'NONE', #65706, 10.50000000000009200 ) ; +#43610 = CARTESIAN_POINT ( 'NONE', ( -11.00202449666889000, 49.78907889423216200, -28.25433304472396800 ) ) ; +#43611 = AXIS2_PLACEMENT_3D ( 'NONE', #75713, #38431, #1190 ) ; +#43612 = ORIENTED_EDGE ( 'NONE', *, *, #60417, .F. ) ; +#43613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43614 = VERTEX_POINT ( 'NONE', #58502 ) ; +#43615 = ADVANCED_FACE ( 'NONE', ( #61757 ), #64788, .T. ) ; +#43616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43617 = CARTESIAN_POINT ( 'NONE', ( 17.40875264640714100, 18.42052012210267300, -28.41157636893861100 ) ) ; +#43618 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 44.66666666666667100, 3.124568980892192800 ) ) ; +#43619 = CIRCLE ( 'NONE', #38465, 10.50000000000009600 ) ; +#43620 = ORIENTED_EDGE ( 'NONE', *, *, #65314, .T. ) ; +#43621 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536600, 81.82440674572818300, -28.45987523529581900 ) ) ; +#43622 = ORIENTED_EDGE ( 'NONE', *, *, #19767, .F. ) ; +#43623 = VERTEX_POINT ( 'NONE', #77264 ) ; +#43624 = CARTESIAN_POINT ( 'NONE', ( 3.530520547801897300, 91.59999999999999400, -28.70555803803016200 ) ) ; +#43625 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#43626 = ADVANCED_FACE ( 'NONE', ( #28690 ), #24736, .F. ) ; +#43627 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 70.34267608797600200, -28.20555803803030800 ) ) ; +#43628 = CARTESIAN_POINT ( 'NONE', ( 2.997978530266251200, 49.78907435382946300, -28.25433648786268700 ) ) ; +#43629 = PLANE ( 'NONE', #7373 ) ; +#43630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70630, #27133, #2341, #45846 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002063080595559263500 ), + .UNSPECIFIED. ) ; +#43631 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43632 = CARTESIAN_POINT ( 'NONE', ( -1.116254736416681700, 14.05000000000004900, -28.53994725305383200 ) ) ; +#43633 = EDGE_CURVE ( 'NONE', #27795, #38042, #10806, .T. ) ; +#43634 = CIRCLE ( 'NONE', #61959, 10.50000000000009600 ) ; +#43635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43636 = CIRCLE ( 'NONE', #18702, 10.00000000000009200 ) ; +#43637 = EDGE_CURVE ( 'NONE', #20598, #71807, #45132, .T. ) ; +#43638 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#43639 = EDGE_LOOP ( 'NONE', ( #52179, #26862, #19741 ) ) ; +#43640 = CARTESIAN_POINT ( 'NONE', ( -12.53318012365767400, 55.79999999999999700, -28.37307693585060900 ) ) ; +#43641 = ORIENTED_EDGE ( 'NONE', *, *, #43583, .F. ) ; +#43642 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43643 = CARTESIAN_POINT ( 'NONE', ( -2.438065798940679800, 28.61613388835921900, -28.57723500840069500 ) ) ; +#43644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43645 = EDGE_CURVE ( 'NONE', #69111, #24338, #77118, .T. ) ; +#43646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43647 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804057200, 26.44142842854297400, -28.37229765499279200 ) ) ; +#43648 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43649 = CIRCLE ( 'NONE', #9731, 9.500000000000097700 ) ; +#43651 = ORIENTED_EDGE ( 'NONE', *, *, #31896, .F. ) ; +#43650 = EDGE_CURVE ( 'NONE', #10148, #67675, #76306, .T. ) ; +#43652 = CONICAL_SURFACE ( 'NONE', #2583, 10.50000000000009600, 0.7853981633974500600 ) ; +#43653 = ORIENTED_EDGE ( 'NONE', *, *, #10703, .T. ) ; +#43654 = AXIS2_PLACEMENT_3D ( 'NONE', #44061, #50319, #13122 ) ; +#43655 = VERTEX_POINT ( 'NONE', #15257 ) ; +#43656 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#43657 = ORIENTED_EDGE ( 'NONE', *, *, #7563, .T. ) ; +#43658 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 51.00000000000000700, -12.20555803803000200 ) ) ; +#43659 = CONICAL_SURFACE ( 'NONE', #20482, 10.00000000000009200, 0.7853981633974447300 ) ; +#43660 = EDGE_LOOP ( 'NONE', ( #50457, #51615, #58955, #38904 ) ) ; +#43661 = ORIENTED_EDGE ( 'NONE', *, *, #49708, .F. ) ; +#43662 = ORIENTED_EDGE ( 'NONE', *, *, #38653, .F. ) ; +#43663 = ORIENTED_EDGE ( 'NONE', *, *, #48053, .F. ) ; +#43664 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 16.16666666666667900, 3.794441961969996900 ) ) ; +#43665 = EDGE_LOOP ( 'NONE', ( #8000, #31668, #9997, #78080 ) ) ; +#43666 = AXIS2_PLACEMENT_3D ( 'NONE', #26526, #45225, #14000 ) ; +#43667 = EDGE_CURVE ( 'NONE', #78548, #47643, #62661, .T. ) ; +#43668 = EDGE_CURVE ( 'NONE', #19509, #47186, #48155, .T. ) ; +#43669 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 81.25732391202370800, -28.20555803803030800 ) ) ; +#43670 = AXIS2_PLACEMENT_3D ( 'NONE', #18271, #61800, #24529 ) ; +#43671 = ORIENTED_EDGE ( 'NONE', *, *, #25698, .T. ) ; +#43672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43673 = FACE_OUTER_BOUND ( 'NONE', #49851, .T. ) ; +#43674 = EDGE_LOOP ( 'NONE', ( #80008, #58275, #80050, #27261 ) ) ; +#43675 = ORIENTED_EDGE ( 'NONE', *, *, #10200, .T. ) ; +#43676 = EDGE_LOOP ( 'NONE', ( #7996, #14027, #39828, #58988, #77961 ) ) ; +#43677 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725302100, 24.54999999999999700, -28.20555803802994200 ) ) ; +#43678 = ORIENTED_EDGE ( 'NONE', *, *, #57972, .T. ) ; +#43679 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 18.50000000000000700, -9.258116921287651700 ) ) ; +#43680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43681 = ORIENTED_EDGE ( 'NONE', *, *, #6013, .T. ) ; +#43682 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19744, #57010, #38461, #1222 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104786600, 0.0005411754951807093400 ), + .UNSPECIFIED. ) ; +#43683 = CARTESIAN_POINT ( 'NONE', ( -4.512589988548826100, 90.12140959736002800, -28.55996453402206500 ) ) ; +#43684 = CIRCLE ( 'NONE', #62017, 9.500000000000095900 ) ; +#43685 = EDGE_CURVE ( 'NONE', #26468, #22570, #41268, .T. ) ; +#43686 = AXIS2_PLACEMENT_3D ( 'NONE', #35116, #53845, #16596 ) ; +#43687 = AXIS2_PLACEMENT_3D ( 'NONE', #8486, #51986, #14772 ) ; +#43688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43689 = VERTEX_POINT ( 'NONE', #9522 ) ; +#43690 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#43691 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#43692 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43693 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#43694 = FACE_OUTER_BOUND ( 'NONE', #55156, .T. ) ; +#43695 = ORIENTED_EDGE ( 'NONE', *, *, #54635, .T. ) ; +#43696 = ADVANCED_FACE ( 'NONE', ( #43216 ), #22795, .F. ) ; +#43697 = AXIS2_PLACEMENT_3D ( 'NONE', #67582, #73850, #24080 ) ; +#43698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43699 = EDGE_LOOP ( 'NONE', ( #27368, #61603, #39855 ) ) ; +#43700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43701 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171896900, 90.46231468379654900, -28.37082013777865400 ) ) ; +#43702 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43703 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43704 = ADVANCED_FACE ( 'NONE', ( #57826 ), #70457, .T. ) ; +#43705 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43706 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 10.52620220503754400, -28.70555803802992800 ) ) ; +#43707 = ADVANCED_FACE ( 'NONE', ( #39307 ), #55858, .T. ) ; +#43708 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056687800, 24.54999999999998600, -28.70555803802994200 ) ) ; +#43709 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725302100, 24.54999999999999700, -28.20555803802994200 ) ) ; +#43710 = CARTESIAN_POINT ( 'NONE', ( 10.69188627458393100, 39.58874248361072300, -28.53740755999535800 ) ) ; +#43711 = CIRCLE ( 'NONE', #41566, 10.00000000000009600 ) ; +#43712 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 22.00000000000001100, -1.205558038030005300 ) ) ; +#43713 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43714 = FACE_OUTER_BOUND ( 'NONE', #10545, .T. ) ; +#43715 = EDGE_LOOP ( 'NONE', ( #68188, #72661, #59806, #32776, #39886 ) ) ; +#43716 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 43.99926474563213200, -28.70555803802997700 ) ) ; +#43717 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284932100, 39.27966528189954000, -28.30868034705250100 ) ) ; +#43718 = AXIS2_PLACEMENT_3D ( 'NONE', #78983, #23208, #66462 ) ; +#43719 = ORIENTED_EDGE ( 'NONE', *, *, #44929, .F. ) ; +#43720 = EDGE_CURVE ( 'NONE', #5350, #54501, #72450, .T. ) ; +#43721 = FACE_OUTER_BOUND ( 'NONE', #79166, .T. ) ; +#43722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43723 = ORIENTED_EDGE ( 'NONE', *, *, #15928, .F. ) ; +#43724 = FACE_OUTER_BOUND ( 'NONE', #13697, .T. ) ; +#43725 = ORIENTED_EDGE ( 'NONE', *, *, #45905, .T. ) ; +#43726 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43728 = AXIS2_PLACEMENT_3D ( 'NONE', #34851, #78367, #41084 ) ; +#43729 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566721500, 24.54999999999998600, -28.70555803802994200 ) ) ; +#43730 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17851, #55091, #30380, #73890 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964862000, 0.0005839769583134433000 ), + .UNSPECIFIED. ) ; +#43731 = CONICAL_SURFACE ( 'NONE', #29344, 10.50000000000009600, 0.7853981633974518300 ) ; +#43732 = ORIENTED_EDGE ( 'NONE', *, *, #46772, .T. ) ; +#43733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43734 = VERTEX_POINT ( 'NONE', #10075 ) ; +#43735 = VERTEX_POINT ( 'NONE', #22585 ) ; +#43736 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 60.34267608797601700, -28.20555803802997700 ) ) ; +#43737 = ORIENTED_EDGE ( 'NONE', *, *, #19876, .T. ) ; +#43738 = ORIENTED_EDGE ( 'NONE', *, *, #70755, .T. ) ; +#43739 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34390, #59419, #78181, #40912 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978158900E-007, 0.001052545149297103800 ), + .UNSPECIFIED. ) ; +#43740 = ORIENTED_EDGE ( 'NONE', *, *, #45901, .T. ) ; +#43741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43742 = ORIENTED_EDGE ( 'NONE', *, *, #40172, .T. ) ; +#43743 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#43744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43745 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43746 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39784, #77054, #8754, #52267 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.477419510104565600E-005, 0.0003518478340460129400 ), + .UNSPECIFIED. ) ; +#43747 = VECTOR ( 'NONE', #3483, 1000.000000000000000 ) ; +#43748 = ORIENTED_EDGE ( 'NONE', *, *, #27384, .T. ) ; +#43750 = EDGE_CURVE ( 'NONE', #22368, #59944, #8157, .T. ) ; +#43749 = VERTEX_POINT ( 'NONE', #66118 ) ; +#43751 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 89.94924284854739900, -28.20555803802997700 ) ) ; +#43752 = VERTEX_POINT ( 'NONE', #72113 ) ; +#43753 = ORIENTED_EDGE ( 'NONE', *, *, #24495, .T. ) ; +#43754 = EDGE_CURVE ( 'NONE', #40229, #28171, #33739, .T. ) ; +#43755 = ORIENTED_EDGE ( 'NONE', *, *, #33419, .T. ) ; +#43756 = ORIENTED_EDGE ( 'NONE', *, *, #60527, .F. ) ; +#43757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43758 = CIRCLE ( 'NONE', #79612, 10.50000000000009900 ) ; +#43759 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 65.66666666666668600, -5.535685056952199400 ) ) ; +#43760 = VERTEX_POINT ( 'NONE', #22849 ) ; +#43761 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17903, #55147, #24167, #67684 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.160620118961455500E-017, 0.001492013864175166300 ), + .UNSPECIFIED. ) ; +#43762 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#43763 = EDGE_CURVE ( 'NONE', #23418, #76469, #10147, .T. ) ; +#43764 = ORIENTED_EDGE ( 'NONE', *, *, #32953, .F. ) ; +#43765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43766 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 30.66666666666667500, -8.133761268305512700 ) ) ; +#43767 = EDGE_CURVE ( 'NONE', #35530, #8089, #6240, .T. ) ; +#43768 = AXIS2_PLACEMENT_3D ( 'NONE', #9660, #34694, #78210 ) ; +#43769 = CARTESIAN_POINT ( 'NONE', ( 10.46481234601706400, 9.406791769321971600, -28.68794773163825000 ) ) ; +#43770 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526974300, 81.58737389638852700, -28.29936525552453500 ) ) ; +#43771 = FACE_OUTER_BOUND ( 'NONE', #31063, .T. ) ; +#43772 = ORIENTED_EDGE ( 'NONE', *, *, #13525, .T. ) ; +#43773 = CARTESIAN_POINT ( 'NONE', ( -9.558325395146773900, 8.915291560575775900, -28.64723264288325000 ) ) ; +#43774 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 68.00000000000000000, 9.794441961969996100 ) ) ; +#43775 = ORIENTED_EDGE ( 'NONE', *, *, #36044, .F. ) ; +#43776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43777 = ORIENTED_EDGE ( 'NONE', *, *, #55465, .F. ) ; +#43778 = AXIS2_PLACEMENT_3D ( 'NONE', #49337, #55346, #18376 ) ; +#43779 = EDGE_CURVE ( 'NONE', #48282, #22658, #20387, .T. ) ; +#43780 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34864, #72138, #28649, #78390 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104726100, 0.0005411754951806919900 ), + .UNSPECIFIED. ) ; +#43781 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 43.65857157145691000, -28.20555803802997700 ) ) ; +#43782 = EDGE_CURVE ( 'NONE', #16201, #37342, #37340, .T. ) ; +#43783 = EDGE_CURVE ( 'NONE', #58276, #2651, #5923, .T. ) ; +#43784 = ADVANCED_FACE ( 'NONE', ( #68530 ), #2300, .T. ) ; +#43785 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#43786 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#43787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43788 = AXIS2_PLACEMENT_3D ( 'NONE', #44682, #7457, #50956 ) ; +#43789 = FACE_OUTER_BOUND ( 'NONE', #33841, .T. ) ; +#43790 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748478600, 71.37838321498782100, -28.29547179040479700 ) ) ; +#43791 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950523800, 17.69228657120656900, -28.53891855580015100 ) ) ; +#43792 = VERTEX_POINT ( 'NONE', #29669 ) ; +#43793 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#43794 = ORIENTED_EDGE ( 'NONE', *, *, #16360, .F. ) ; +#43795 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43797 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#43798 = EDGE_CURVE ( 'NONE', #28617, #6355, #18873, .T. ) ; +#43799 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43800 = ADVANCED_FACE ( 'NONE', ( #35455 ), #33475, .T. ) ; +#43801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43802 = AXIS2_PLACEMENT_3D ( 'NONE', #78022, #40750, #3473 ) ; +#43803 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#43804 = AXIS2_PLACEMENT_3D ( 'NONE', #23925, #67419, #30196 ) ; +#43805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43807 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.43250300240228500, -28.20555803802997700 ) ) ; +#43808 = CIRCLE ( 'NONE', #45541, 10.50000000000009600 ) ; +#43809 = ORIENTED_EDGE ( 'NONE', *, *, #7497, .F. ) ; +#43810 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#43811 = ORIENTED_EDGE ( 'NONE', *, *, #44441, .T. ) ; +#43812 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#43813 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.79999999999951400, -28.20555803803047800 ) ) ; +#43814 = FACE_OUTER_BOUND ( 'NONE', #26149, .T. ) ; +#43815 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#43816 = EDGE_LOOP ( 'NONE', ( #18405, #55543, #65005 ) ) ; +#43817 = EDGE_LOOP ( 'NONE', ( #4568, #8937, #9578, #71829 ) ) ; +#43818 = ORIENTED_EDGE ( 'NONE', *, *, #16746, .T. ) ; +#43819 = VERTEX_POINT ( 'NONE', #73177 ) ; +#43820 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#43821 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#43822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43823 = AXIS2_PLACEMENT_3D ( 'NONE', #7543, #51041, #13847 ) ; +#43824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43825 = ADVANCED_FACE ( 'NONE', ( #49982 ), #362, .T. ) ; +#43826 = AXIS2_PLACEMENT_3D ( 'NONE', #56614, #75398, #62904 ) ; +#43827 = ORIENTED_EDGE ( 'NONE', *, *, #47594, .T. ) ; +#43828 = VECTOR ( 'NONE', #56717, 1000.000000000000000 ) ; +#43829 = EDGE_LOOP ( 'NONE', ( #12681, #17301, #79918 ) ) ; +#43830 = EDGE_LOOP ( 'NONE', ( #42963, #15896, #74804, #60896, #48196, #10692 ) ) ; +#43831 = EDGE_LOOP ( 'NONE', ( #33865, #22528, #35906, #77299, #53254 ) ) ; +#43832 = ORIENTED_EDGE ( 'NONE', *, *, #63246, .F. ) ; +#43833 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344350900, 31.17701665379241800, -28.20555803802996000 ) ) ; +#43834 = EDGE_LOOP ( 'NONE', ( #38366, #27915, #66215, #44423 ) ) ; +#43835 = VERTEX_POINT ( 'NONE', #42389 ) ; +#43836 = FACE_OUTER_BOUND ( 'NONE', #41366, .T. ) ; +#43837 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 36.66666666666667100, 2.794441961969992100 ) ) ; +#43838 = PLANE ( 'NONE', #19888 ) ; +#43839 = AXIS2_PLACEMENT_3D ( 'NONE', #42563, #5329, #79862 ) ; +#43840 = ORIENTED_EDGE ( 'NONE', *, *, #50546, .T. ) ; +#43841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43842 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20407, #1614, #14411, #57933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241065000, 0.0005195704752302032900 ), + .UNSPECIFIED. ) ; +#43844 = AXIS2_PLACEMENT_3D ( 'NONE', #41685, #4435, #47922 ) ; +#43845 = CIRCLE ( 'NONE', #48242, 10.50000000000009600 ) ; +#43846 = ORIENTED_EDGE ( 'NONE', *, *, #54291, .T. ) ; +#43847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4436, #23215, #66739, #29506 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881204106636100E-007, 0.0008724366121404029100 ), + .UNSPECIFIED. ) ; +#43849 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.80277574221156200, -28.32715733700493400 ) ) ; +#43850 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432775300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#43851 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 86.76150692817282100, -28.68631150211663100 ) ) ; +#43852 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 8.000000000000012400, -1.205558038030002800 ) ) ; +#43853 = EDGE_CURVE ( 'NONE', #65181, #12775, #72257, .T. ) ; +#43854 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43856 = EDGE_CURVE ( 'NONE', #45917, #28139, #57769, .T. ) ; +#43855 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64024, #76491, #45446, #8200 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866807014300E-007, 0.001076778502991257000 ), + .UNSPECIFIED. ) ; +#43857 = ORIENTED_EDGE ( 'NONE', *, *, #78750, .F. ) ; +#43858 = ORIENTED_EDGE ( 'NONE', *, *, #6501, .T. ) ; +#43859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43860 = CARTESIAN_POINT ( 'NONE', ( 15.87128661100562600, 8.257426777988747800, -28.57819369525178400 ) ) ; +#43861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43862 = VERTEX_POINT ( 'NONE', #36410 ) ; +#43863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43864 = EDGE_CURVE ( 'NONE', #38287, #19205, #4281, .T. ) ; +#43865 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6268, #62320, #18784, #68561 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207982721300E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#43866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43867 = ADVANCED_FACE ( 'NONE', ( #66577 ), #31543, .T. ) ; +#43868 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999949400, 31.46823913367205300, -28.70555803802996700 ) ) ; +#43869 = EDGE_CURVE ( 'NONE', #44748, #30876, #43291, .T. ) ; +#43870 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43871 = CYLINDRICAL_SURFACE ( 'NONE', #37701, 10.00000000000000000 ) ; +#43872 = ORIENTED_EDGE ( 'NONE', *, *, #48072, .F. ) ; +#43873 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 53.65857157145694600, -28.20555803802997700 ) ) ; +#43874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43875 = EDGE_LOOP ( 'NONE', ( #34785, #4283, #36866 ) ) ; +#43876 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 42.50000000000002100, -4.865812075874393000 ) ) ; +#43877 = EDGE_CURVE ( 'NONE', #19028, #44558, #28909, .T. ) ; +#43878 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#43879 = ORIENTED_EDGE ( 'NONE', *, *, #78232, .T. ) ; +#43880 = FACE_OUTER_BOUND ( 'NONE', #75790, .T. ) ; +#43881 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356100, 70.79999999999968500, -28.55171188418412200 ) ) ; +#43882 = ORIENTED_EDGE ( 'NONE', *, *, #67166, .F. ) ; +#43883 = EDGE_LOOP ( 'NONE', ( #69831, #75055, #55312 ) ) ; +#43884 = ORIENTED_EDGE ( 'NONE', *, *, #10742, .T. ) ; +#43885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43886 = ORIENTED_EDGE ( 'NONE', *, *, #57894, .F. ) ; +#43887 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 101.6000000000000100, -18.70555803803001300 ) ) ; +#43888 = ADVANCED_FACE ( 'NONE', ( #53912 ), #79227, .F. ) ; +#43889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#43891 = VERTEX_POINT ( 'NONE', #24465 ) ; +#43892 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662744233600, 63.66464174796078600, -28.53896444442210300 ) ) ; +#43893 = AXIS2_PLACEMENT_3D ( 'NONE', #42303, #48537, #36080 ) ; +#43894 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.22294471194862100, -28.20555803802997700 ) ) ; +#43895 = FACE_OUTER_BOUND ( 'NONE', #59201, .T. ) ; +#43896 = EDGE_CURVE ( 'NONE', #26644, #30281, #14390, .T. ) ; +#43897 = EDGE_CURVE ( 'NONE', #28595, #25276, #80710, .T. ) ; +#43898 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#43899 = EDGE_CURVE ( 'NONE', #61248, #53468, #51933, .T. ) ; +#43900 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 58.62623792124937700, -28.70555803802997700 ) ) ; +#43901 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 67.94142842854287800, -28.20555803803047800 ) ) ; +#43902 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 71.43250300240197200, -28.20555803803047800 ) ) ; +#43903 = CONICAL_SURFACE ( 'NONE', #39497, 10.00000000000009400, 0.7853981633974447300 ) ; +#43904 = AXIS2_PLACEMENT_3D ( 'NONE', #44752, #51015, #1266 ) ; +#43905 = EDGE_LOOP ( 'NONE', ( #11529, #77320, #7905, #20510, #26538, #52277, #71492, #6752, #4733, #10555, #63470, #52054, #48576, #13700, #58755, #53590, #1911, #72201, #33752, #52890, #5850, #18426, #8481, #71755, #66626, #46535, #5071, #41277, #1894, #80690, #53603, #29978, #36283, #68055, #1773, #39574, #61223, #331, #61129, #22630, #8086, #64156 ) ) ; +#43906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43907 = ADVANCED_FACE ( 'NONE', ( #48036 ), #12219, .T. ) ; +#43908 = VERTEX_POINT ( 'NONE', #68237 ) ; +#43909 = ADVANCED_FACE ( 'NONE', ( #62674 ), #13050, .T. ) ; +#43910 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708534600, 85.79999999999998300, -28.63843632546336000 ) ) ; +#43911 = ORIENTED_EDGE ( 'NONE', *, *, #63738, .T. ) ; +#43912 = EDGE_LOOP ( 'NONE', ( #10721, #8574, #3248 ) ) ; +#43913 = ORIENTED_EDGE ( 'NONE', *, *, #32331, .F. ) ; +#43914 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390746400, 13.41466791010139500, -28.53910738522677800 ) ) ; +#43915 = ORIENTED_EDGE ( 'NONE', *, *, #52837, .T. ) ; +#43916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43917 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454051400, 52.51973550835649700, -28.70555803803010200 ) ) ; +#43918 = CIRCLE ( 'NONE', #24805, 10.00000000000009200 ) ; +#43919 = AXIS2_PLACEMENT_3D ( 'NONE', #55051, #54785, #17814 ) ; +#43920 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004400, 39.69949493661175700, -28.70555803802995200 ) ) ; +#43921 = CARTESIAN_POINT ( 'NONE', ( 12.10011726479512900, 35.04999999999999700, -28.53808257741981800 ) ) ; +#43922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43923 = CARTESIAN_POINT ( 'NONE', ( 10.04026895850643800, 20.37561462481247400, -28.30309985153374800 ) ) ; +#43924 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466626800, 40.76893971291461600, -28.57333386111660500 ) ) ; +#43925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62779, #56488, #75269, #37981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192576588400 ), + .UNSPECIFIED. ) ; +#43926 = ADVANCED_FACE ( 'NONE', ( #64645 ), #60733, .T. ) ; +#43927 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43928 = CONICAL_SURFACE ( 'NONE', #71151, 10.00000000000009200, 0.7853981633974447300 ) ; +#43929 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 48.83333333333334300, 9.794441961969999600 ) ) ; +#43930 = ORIENTED_EDGE ( 'NONE', *, *, #69430, .T. ) ; +#43931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43932 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 14.00000000000001800, -6.205558038030003100 ) ) ; +#43933 = AXIS2_PLACEMENT_3D ( 'NONE', #24924, #68435, #31193 ) ; +#43934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43935 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#43936 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#43937 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 58.39962244433174000, -28.53664883431610000 ) ) ; +#43938 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973384600, 57.33501542110281000, -28.70555803803001600 ) ) ; +#43939 = EDGE_CURVE ( 'NONE', #67444, #1022, #77260, .T. ) ; +#43940 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 16.33333333333334600, 8.320721403598817300 ) ) ; +#43941 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000000000, 30.40050506338822300, -28.70555803802996700 ) ) ; +#43942 = VERTEX_POINT ( 'NONE', #24994 ) ; +#43943 = AXIS2_PLACEMENT_3D ( 'NONE', #22955, #66477, #29266 ) ; +#43944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43945 = ORIENTED_EDGE ( 'NONE', *, *, #17238, .T. ) ; +#43946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69587, #14112, #20373, #63902 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527065388100E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#43947 = CARTESIAN_POINT ( 'NONE', ( 10.97683272551938800, 39.08088969930749100, -28.30223898143227500 ) ) ; +#43948 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825473900, 80.16054007504465100, -28.34042301926890100 ) ) ; +#43949 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 75.67652461701985100, -28.70555803803014400 ) ) ; +#43950 = CIRCLE ( 'NONE', #38175, 10.50000000000009600 ) ; +#43951 = EDGE_LOOP ( 'NONE', ( #33177, #71966, #24316, #69428 ) ) ; +#43952 = EDGE_LOOP ( 'NONE', ( #30436, #4192, #58526 ) ) ; +#43953 = CARTESIAN_POINT ( 'NONE', ( -10.97684032349348400, 10.01912043132466200, -28.30223257055578800 ) ) ; +#43954 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#43955 = CIRCLE ( 'NONE', #22387, 9.500000000000099500 ) ; +#43956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43482, #56004, #74792, #37487 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061278200E-007, 0.001119323292485906600 ), + .UNSPECIFIED. ) ; +#43957 = VERTEX_POINT ( 'NONE', #37461 ) ; +#43958 = ORIENTED_EDGE ( 'NONE', *, *, #71364, .T. ) ; +#43959 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#43960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43961 = ORIENTED_EDGE ( 'NONE', *, *, #245, .F. ) ; +#43962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43963 = VERTEX_POINT ( 'NONE', #49963 ) ; +#43964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43965 = ORIENTED_EDGE ( 'NONE', *, *, #75728, .T. ) ; +#43966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43967 = AXIS2_PLACEMENT_3D ( 'NONE', #24081, #67586, #30350 ) ; +#43968 = CONICAL_SURFACE ( 'NONE', #52513, 10.00000000000009400, 0.7853981633974447300 ) ; +#43969 = ADVANCED_FACE ( 'NONE', ( #29612 ), #44114, .T. ) ; +#43970 = PRODUCT_CONTEXT ( 'NONE', #12767, 'mechanical' ) ; +#43971 = CARTESIAN_POINT ( 'NONE', ( -16.88106447389087000, 80.49763722318498100, -28.32100408376067300 ) ) ; +#43972 = VERTEX_POINT ( 'NONE', #75037 ) ; +#43973 = CYLINDRICAL_SURFACE ( 'NONE', #65052, 10.00000000000000200 ) ; +#43974 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462650700, 81.39409401757630700, -28.39369363572357900 ) ) ; +#43975 = EDGE_CURVE ( 'NONE', #9685, #12645, #66267, .T. ) ; +#43976 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 19.83333333333334300, -3.349151577478984600 ) ) ; +#43977 = ORIENTED_EDGE ( 'NONE', *, *, #80547, .T. ) ; +#43978 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 12.17681279774500200, -28.70555803802994200 ) ) ; +#43979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43980 = EDGE_LOOP ( 'NONE', ( #18529, #57728, #45842, #62305 ) ) ; +#43981 = ORIENTED_EDGE ( 'NONE', *, *, #36766, .T. ) ; +#43982 = EDGE_LOOP ( 'NONE', ( #14828, #9658, #79122, #27158 ) ) ; +#43983 = FACE_OUTER_BOUND ( 'NONE', #29077, .T. ) ; +#43984 = ORIENTED_EDGE ( 'NONE', *, *, #11990, .F. ) ; +#43985 = FACE_OUTER_BOUND ( 'NONE', #67114, .T. ) ; +#43986 = ADVANCED_FACE ( 'NONE', ( #46086 ), #58762, .F. ) ; +#43987 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 41.46868088498121800, -28.51286550264512700 ) ) ; +#43988 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174874700, 70.16054007504448000, -28.34042301926893600 ) ) ; +#43989 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 89.60439022488337500, -28.70555803802997700 ) ) ; +#43990 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654670700, 71.32559822014187000, -28.29986836858022800 ) ) ; +#43991 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#43992 = EDGE_CURVE ( 'NONE', #77114, #41092, #75314, .T. ) ; +#43993 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43994 = EDGE_CURVE ( 'NONE', #68993, #23588, #20839, .T. ) ; +#43995 = CONICAL_SURFACE ( 'NONE', #79989, 10.00000000000009200, 0.7853981633974447300 ) ; +#43996 = ORIENTED_EDGE ( 'NONE', *, *, #34395, .F. ) ; +#43997 = ADVANCED_FACE ( 'NONE', ( #11093 ), #73376, .T. ) ; +#43998 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#43999 = CARTESIAN_POINT ( 'NONE', ( -2.769188246343340200, 70.94994472024596600, -28.43636979168689600 ) ) ; +#44000 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906787900, 10.17036336027459600, -28.27338767626449500 ) ) ; +#44001 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655522100, 31.17701665379217600, -28.20555803802996000 ) ) ; +#44002 = AXIS2_PLACEMENT_3D ( 'NONE', #52348, #58634, #8824 ) ; +#44003 = EDGE_CURVE ( 'NONE', #41092, #45183, #51732, .T. ) ; +#44004 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269453400, 61.58737389638835700, -28.29936525552456000 ) ) ; +#44005 = EDGE_CURVE ( 'NONE', #11270, #64735, #37295, .T. ) ; +#44006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44007 = EDGE_CURVE ( 'NONE', #68008, #25185, #22873, .T. ) ; +#44008 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462477000, 90.20590598242372900, -28.39369363572359700 ) ) ; +#44009 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75972, #69719, #26244, #1439 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584768400, 0.0006651184466334771900 ), + .UNSPECIFIED. ) ; +#44010 = ADVANCED_FACE ( 'NONE', ( #25691 ), #40251, .F. ) ; +#44011 = AXIS2_PLACEMENT_3D ( 'NONE', #32144, #38365, #69394 ) ; +#44012 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#44013 = ORIENTED_EDGE ( 'NONE', *, *, #31542, .T. ) ; +#44014 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 23.37738371066728500, -28.70555803802995200 ) ) ; +#44015 = ORIENTED_EDGE ( 'NONE', *, *, #76538, .T. ) ; +#44016 = ADVANCED_FACE ( 'NONE', ( #14979 ), #57327, .T. ) ; +#44017 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 63.49999999999999300, 2.454695999814385600 ) ) ; +#44018 = AXIS2_PLACEMENT_3D ( 'NONE', #45368, #8116, #51624 ) ; +#44019 = AXIS2_PLACEMENT_3D ( 'NONE', #18995, #6493, #25278 ) ; +#44020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44021 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44022 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 28.50000000000001100, 4.650848422521016300 ) ) ; +#44023 = FACE_OUTER_BOUND ( 'NONE', #56087, .T. ) ; +#44024 = ORIENTED_EDGE ( 'NONE', *, *, #54768, .T. ) ; +#44025 = CIRCLE ( 'NONE', #5001, 9.500000000000097700 ) ; +#44026 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339055500, 81.46283204837337200, -28.48697406221665300 ) ) ; +#44027 = VERTEX_POINT ( 'NONE', #51030 ) ; +#44028 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534570700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#44029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44030 = EDGE_LOOP ( 'NONE', ( #21299, #74211, #71016, #31656 ) ) ; +#44031 = CIRCLE ( 'NONE', #60101, 9.500000000000099500 ) ; +#44032 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 65.83333333333332900, -12.20555803803000600 ) ) ; +#44033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40708, #34485, #59509, #22230 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672743396200E-007, 0.0007670610367943051000 ), + .UNSPECIFIED. ) ; +#44034 = EDGE_LOOP ( 'NONE', ( #47886, #9794, #77561 ) ) ; +#44035 = EDGE_LOOP ( 'NONE', ( #47068, #24177, #66746, #38289, #21736 ) ) ; +#44036 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.36203212531319200, -28.38801640354855800 ) ) ; +#44037 = AXIS2_PLACEMENT_3D ( 'NONE', #29767, #73260, #35994 ) ; +#44038 = EDGE_CURVE ( 'NONE', #70456, #3064, #8365, .T. ) ; +#44039 = FACE_OUTER_BOUND ( 'NONE', #54696, .T. ) ; +#44040 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#44041 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 47.20389005397393600, -28.37519436813182900 ) ) ; +#44042 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 33.15857157145691000, -28.20555803802996700 ) ) ; +#44043 = VERTEX_POINT ( 'NONE', #44768 ) ; +#44044 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819213700, 71.65075715145309200, -28.20555803802997700 ) ) ; +#44045 = CONICAL_SURFACE ( 'NONE', #36303, 10.50000000000009600, 0.7853981633974482800 ) ; +#44046 = EDGE_LOOP ( 'NONE', ( #70074, #79216, #57480, #38895 ) ) ; +#44047 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510340700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#44048 = EDGE_CURVE ( 'NONE', #4991, #52097, #74725, .T. ) ; +#44049 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#44050 = EDGE_LOOP ( 'NONE', ( #22586, #10613, #51576, #41185 ) ) ; +#44051 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44052 = AXIS2_PLACEMENT_3D ( 'NONE', #69232, #31974, #75482 ) ; +#44053 = ORIENTED_EDGE ( 'NONE', *, *, #76793, .T. ) ; +#44054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44055 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492634400, 28.07379779496234900, -28.70555803802994200 ) ) ; +#44056 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925625000, 10.78032162676582000, -28.55467576046953900 ) ) ; +#44057 = VERTEX_POINT ( 'NONE', #45034 ) ; +#44058 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#44059 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#44060 = FACE_OUTER_BOUND ( 'NONE', #19300, .T. ) ; +#44061 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#44062 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985147800, 36.00238095238092500, -28.70555803802995200 ) ) ; +#44063 = ORIENTED_EDGE ( 'NONE', *, *, #47832, .T. ) ; +#44064 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715066500, 20.32033471810043300, -28.30868034705248300 ) ) ; +#44065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44066 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44067 = EDGE_LOOP ( 'NONE', ( #20402, #24965, #65281 ) ) ; +#44068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44069 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820195600, 28.58258585630878200, -28.27509349209128300 ) ) ; +#44070 = AXIS2_PLACEMENT_3D ( 'NONE', #32646, #76154, #38866 ) ; +#44071 = EDGE_LOOP ( 'NONE', ( #10245, #8793, #3638, #8819 ) ) ; +#44072 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44073 = CONICAL_SURFACE ( 'NONE', #20604, 10.00000000000009200, 0.7853981633974415100 ) ; +#44074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44075 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#44076 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#44077 = AXIS2_PLACEMENT_3D ( 'NONE', #52445, #58723, #27752 ) ; +#44078 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 9.746602415621723000, -28.20555803803009500 ) ) ; +#44079 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60313, #66542, #29334, #72804 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005808194314993468000, 0.006247607834321682600 ), + .UNSPECIFIED. ) ; +#44080 = EDGE_CURVE ( 'NONE', #4270, #30379, #60284, .T. ) ; +#44081 = FACE_OUTER_BOUND ( 'NONE', #67190, .T. ) ; +#44082 = ADVANCED_FACE ( 'NONE', ( #16942 ), #14089, .T. ) ; +#44083 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.41070809551059300, -28.20555803802996700 ) ) ; +#44084 = ORIENTED_EDGE ( 'NONE', *, *, #47338, .T. ) ; +#44085 = ADVANCED_FACE ( 'NONE', ( #56814 ), #54850, .F. ) ; +#44086 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 34.50000000000000000, -7.061964498581016200 ) ) ; +#44087 = CARTESIAN_POINT ( 'NONE', ( 16.08902460162569900, 49.51983257179052300, -28.64886839674168700 ) ) ; +#44088 = ORIENTED_EDGE ( 'NONE', *, *, #31120, .T. ) ; +#44090 = ORIENTED_EDGE ( 'NONE', *, *, #74198, .F. ) ; +#44089 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44091 = ADVANCED_FACE ( 'NONE', ( #7148 ), #21788, .T. ) ; +#44092 = CONICAL_SURFACE ( 'NONE', #57393, 10.50000000000009600, 0.7853981633974500600 ) ; +#44093 = ORIENTED_EDGE ( 'NONE', *, *, #18875, .T. ) ; +#44094 = CONICAL_SURFACE ( 'NONE', #23730, 10.00000000000009600, 0.7853981633974482800 ) ; +#44095 = EDGE_CURVE ( 'NONE', #51472, #33069, #38280, .T. ) ; +#44096 = ORIENTED_EDGE ( 'NONE', *, *, #34383, .F. ) ; +#44097 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993300, 30.75489551879203300, -28.37193179497696200 ) ) ; +#44098 = CONICAL_SURFACE ( 'NONE', #2145, 10.00000000000009600, 0.7853981633974447300 ) ; +#44099 = ORIENTED_EDGE ( 'NONE', *, *, #19766, .T. ) ; +#44100 = CARTESIAN_POINT ( 'NONE', ( 16.42212147479897400, 9.986602973892727800, -28.58281552185030000 ) ) ; +#44101 = ORIENTED_EDGE ( 'NONE', *, *, #42936, .T. ) ; +#44102 = EDGE_LOOP ( 'NONE', ( #34628, #56005, #27742 ) ) ; +#44103 = AXIS2_PLACEMENT_3D ( 'NONE', #77284, #2728, #33770 ) ; +#44104 = EDGE_CURVE ( 'NONE', #67155, #51984, #45750, .T. ) ; +#44105 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846179900, 70.79999999999982700, -28.55171188418389900 ) ) ; +#44106 = CARTESIAN_POINT ( 'NONE', ( 17.07349692871609600, 71.37839075872547300, -28.29547734244375700 ) ) ; +#44107 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650751800, 29.20543520232828200, -28.70555803802994200 ) ) ; +#44108 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 5.833333333333348100, 1.741883078712340300 ) ) ; +#44109 = FACE_OUTER_BOUND ( 'NONE', #56924, .T. ) ; +#44110 = EDGE_CURVE ( 'NONE', #71041, #79395, #9086, .T. ) ; +#44111 = VERTEX_POINT ( 'NONE', #76902 ) ; +#44112 = AXIS2_PLACEMENT_3D ( 'NONE', #4246, #10519, #10258 ) ; +#44113 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654407900, 51.52472935029895500, -28.39317435246135100 ) ) ; +#44114 = CYLINDRICAL_SURFACE ( 'NONE', #40957, 10.00000000000000200 ) ; +#44115 = ORIENTED_EDGE ( 'NONE', *, *, #3762, .F. ) ; +#44116 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#44117 = ORIENTED_EDGE ( 'NONE', *, *, #54289, .T. ) ; +#44118 = ORIENTED_EDGE ( 'NONE', *, *, #56626, .F. ) ; +#44119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12675, #76004, #51199, #13999 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983718941024700E-007, 0.001076779618376607000 ), + .UNSPECIFIED. ) ; +#44120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44121 = CARTESIAN_POINT ( 'NONE', ( 17.16307750806192800, 5.673808732218692100, -27.72141176002974600 ) ) ; +#44122 = ORIENTED_EDGE ( 'NONE', *, *, #73190, .T. ) ; +#44123 = CIRCLE ( 'NONE', #13750, 10.00000000000009600 ) ; +#44124 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648800, 10.01912043132467300, -28.30223257055578000 ) ) ; +#44125 = AXIS2_PLACEMENT_3D ( 'NONE', #54659, #17409, #60938 ) ; +#44126 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44128 = EDGE_CURVE ( 'NONE', #20495, #67144, #31360, .T. ) ; +#44129 = EDGE_CURVE ( 'NONE', #63152, #19510, #16893, .T. ) ; +#44130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44132 = AXIS2_PLACEMENT_3D ( 'NONE', #51531, #14316, #57830 ) ; +#44131 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44133 = ORIENTED_EDGE ( 'NONE', *, *, #67860, .T. ) ; +#44134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44135 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 40.33333333333334300, 1.294441961969997200 ) ) ; +#44136 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 10.00000000000000000, -28.70555803803001300 ) ) ; +#44137 = ORIENTED_EDGE ( 'NONE', *, *, #14415, .F. ) ; +#44138 = FACE_OUTER_BOUND ( 'NONE', #19683, .T. ) ; +#44139 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000381000, 89.63176086632779500, -28.70555803802999500 ) ) ; +#44140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44141 = EDGE_CURVE ( 'NONE', #34273, #56249, #71403, .T. ) ; +#44142 = CARTESIAN_POINT ( 'NONE', ( 24.23118634885315700, 96.21559317442772400, -22.59264721291911500 ) ) ; +#44143 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001200, 71.07757630314171100, -28.53861367218625800 ) ) ; +#44144 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100900, 40.04280755395588900, -28.45034744217088700 ) ) ; +#44145 = AXIS2_PLACEMENT_3D ( 'NONE', #21878, #65426, #28167 ) ; +#44146 = AXIS2_PLACEMENT_3D ( 'NONE', #73652, #36369, #209 ) ; +#44147 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#44148 = CARTESIAN_POINT ( 'NONE', ( 17.22127746187991800, 9.569148358746559800, -28.45573375118228300 ) ) ; +#44149 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 87.92318720225497900, -28.70555803802997700 ) ) ; +#44150 = CARTESIAN_POINT ( 'NONE', ( -10.93544426077506100, 80.09037803491490600, -28.29483400905883500 ) ) ; +#44151 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528177500, 49.63131911501876200, -28.51286550264510900 ) ) ; +#44152 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541607300, 20.01125751638927900, -28.53740755999534400 ) ) ; +#44153 = CONICAL_SURFACE ( 'NONE', #64898, 10.00000000000009200, 0.7853981633974447300 ) ; +#44154 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#44155 = CARTESIAN_POINT ( 'NONE', ( -15.16868429911836600, 44.19769540679921200, -28.70555803803001600 ) ) ; +#44156 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000700, 40.34772751981643800, -28.70555803802999500 ) ) ; +#44157 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180657900, 71.65075715145295000, -28.20555803803014100 ) ) ; +#44158 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44159 = ORIENTED_EDGE ( 'NONE', *, *, #2508, .T. ) ; +#44160 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#44161 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44162 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 35.04999999999999700, -28.20555803802995200 ) ) ; +#44163 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.23796787468681700, -28.38801640354855800 ) ) ; +#44165 = ORIENTED_EDGE ( 'NONE', *, *, #19516, .F. ) ; +#44164 = CARTESIAN_POINT ( 'NONE', ( 3.839550451719029800, 61.13768531620297600, -28.37082013777843800 ) ) ; +#44166 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567154100, 20.24660241562189000, -28.20555803802994200 ) ) ; +#44168 = ADVANCED_FACE ( 'NONE', ( #27646 ), #19828, .T. ) ; +#44167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17006, #29552, #35770, #79291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693209261600E-007, 0.0008724363063898865300 ), + .UNSPECIFIED. ) ; +#44169 = CIRCLE ( 'NONE', #68833, 10.00000000000009200 ) ; +#44170 = ORIENTED_EDGE ( 'NONE', *, *, #46192, .T. ) ; +#44171 = FACE_OUTER_BOUND ( 'NONE', #7551, .T. ) ; +#44172 = ORIENTED_EDGE ( 'NONE', *, *, #44540, .F. ) ; +#44173 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 46.66666666666667900, -10.73183747965883100 ) ) ; +#44174 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14286, #1744, #70291, #33041 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141654637100 ), + .UNSPECIFIED. ) ; +#44175 = ORIENTED_EDGE ( 'NONE', *, *, #62759, .T. ) ; +#44176 = CONICAL_SURFACE ( 'NONE', #41705, 10.50000000000009800, 0.7853981633974500600 ) ; +#44177 = FACE_OUTER_BOUND ( 'NONE', #74864, .T. ) ; +#44178 = ORIENTED_EDGE ( 'NONE', *, *, #57849, .F. ) ; +#44179 = PLANE ( 'NONE', #49277 ) ; +#44180 = VERTEX_POINT ( 'NONE', #64962 ) ; +#44181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7220, #44456, #57028, #19768 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710631560500E-007, 0.0008482615949373553500 ), + .UNSPECIFIED. ) ; +#44182 = ORIENTED_EDGE ( 'NONE', *, *, #78501, .F. ) ; +#44183 = ADVANCED_FACE ( 'NONE', ( #23740 ), #67503, .T. ) ; +#44184 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 11.83333333333334600, 3.794441961969996900 ) ) ; +#44185 = AXIS2_PLACEMENT_3D ( 'NONE', #13811, #57310, #20063 ) ; +#44186 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567153600, 20.24660241562189400, -28.20555803802994200 ) ) ; +#44187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44188 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345591900, 90.07527064970101100, -28.39317435246134400 ) ) ; +#44189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44190 = EDGE_CURVE ( 'NONE', #8139, #28771, #36359, .T. ) ; +#44191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23577, #60849, #36089, #79601 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674171528600E-007, 0.0007987728781051912100 ), + .UNSPECIFIED. ) ; +#44192 = CIRCLE ( 'NONE', #42974, 10.00000000000009400 ) ; +#44193 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#44194 = ORIENTED_EDGE ( 'NONE', *, *, #16735, .F. ) ; +#44195 = CIRCLE ( 'NONE', #33089, 9.500000000000099500 ) ; +#44196 = ORIENTED_EDGE ( 'NONE', *, *, #50197, .T. ) ; +#44197 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019500, 51.43250300240212200, -28.20555803803014400 ) ) ; +#44198 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#44199 = ORIENTED_EDGE ( 'NONE', *, *, #61347, .F. ) ; +#44200 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 14.16666666666666600, -12.20555803803000000 ) ) ; +#44201 = ORIENTED_EDGE ( 'NONE', *, *, #12968, .T. ) ; +#44202 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534570300, 29.49920551340399300, -28.70555803802994200 ) ) ; +#44203 = EDGE_LOOP ( 'NONE', ( #80326, #2546, #61670, #35657 ) ) ; +#44204 = ORIENTED_EDGE ( 'NONE', *, *, #11778, .F. ) ; +#44205 = CONICAL_SURFACE ( 'NONE', #74151, 10.50000000000009600, 0.7853981633974518300 ) ; +#44206 = VERTEX_POINT ( 'NONE', #2896 ) ; +#44207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44208 = ADVANCED_FACE ( 'NONE', ( #5224 ), #1306, .T. ) ; +#44209 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 31.02858243452105600, -28.70555803802996700 ) ) ; +#44210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44211 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 39.07141756547892400, -28.70555803802995200 ) ) ; +#44212 = EDGE_LOOP ( 'NONE', ( #71497, #9999, #9935, #22986 ) ) ; +#44213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44214 = EDGE_CURVE ( 'NONE', #68102, #9619, #2390, .T. ) ; +#44215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44216 = ORIENTED_EDGE ( 'NONE', *, *, #65171, .T. ) ; +#44217 = FACE_OUTER_BOUND ( 'NONE', #34574, .T. ) ; +#44218 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171143700, 19.45593345534904400, -28.57107744631859300 ) ) ; +#44219 = EDGE_CURVE ( 'NONE', #30417, #14521, #3249, .T. ) ; +#44220 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310472500, 30.99769010897086800, -28.61774594594331600 ) ) ; +#44221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44222 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007441600, 21.28032162676585400, -28.55467576046957100 ) ) ; +#44223 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180860400, 81.65075715145344800, -28.20555803803030800 ) ) ; +#44224 = CARTESIAN_POINT ( 'NONE', ( -2.997978530266224500, 28.78907435382948800, -28.25433648786264500 ) ) ; +#44225 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44226 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939082400, 34.41466791010184800, -28.53910738522647300 ) ) ; +#44227 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12923, #6644, #31421, #56412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799586875300E-007, 0.0005050252131287526900 ), + .UNSPECIFIED. ) ; +#44228 = EDGE_CURVE ( 'NONE', #9619, #31993, #68729, .T. ) ; +#44229 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408276600, 30.71413374642153500, -28.27331438134756800 ) ) ; +#44230 = EDGE_CURVE ( 'NONE', #33380, #77240, #34423, .T. ) ; +#44231 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725678200, 83.66464174796072900, -28.53896444442200000 ) ) ; +#44232 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#44233 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 17.66666666666667900, 2.794441961969992100 ) ) ; +#44234 = CONICAL_SURFACE ( 'NONE', #55878, 10.50000000000009600, 0.7853981633974500600 ) ; +#44235 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661469500, 28.49322649091134400, -28.30799595738868700 ) ) ; +#44236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44237 = ORIENTED_EDGE ( 'NONE', *, *, #65762, .T. ) ; +#44238 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148547000, 34.09761904761908400, -28.70555803802999500 ) ) ; +#44239 = EDGE_LOOP ( 'NONE', ( #52243, #37843, #49202, #63720 ) ) ; +#44240 = FACE_OUTER_BOUND ( 'NONE', #76792, .T. ) ; +#44241 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44242 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44244 = AXIS2_PLACEMENT_3D ( 'NONE', #46193, #8928, #52447 ) ; +#44245 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 69.41684396980716100, -28.70555803802999500 ) ) ; +#44247 = VERTEX_POINT ( 'NONE', #46928 ) ; +#44246 = EDGE_CURVE ( 'NONE', #22200, #55143, #52889, .T. ) ; +#44248 = EDGE_CURVE ( 'NONE', #38839, #33514, #50915, .T. ) ; +#44249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44250 = EDGE_CURVE ( 'NONE', #14568, #68675, #54256, .T. ) ; +#44251 = AXIS2_PLACEMENT_3D ( 'NONE', #9853, #53358, #16108 ) ; +#44252 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 39.15930907398620100, -28.35186440610857200 ) ) ; +#44253 = CONICAL_SURFACE ( 'NONE', #79218, 10.00000000000009400, 0.7853981633974447300 ) ; +#44254 = CONICAL_SURFACE ( 'NONE', #28898, 10.50000000000009200, 0.7853981633974482800 ) ; +#44255 = ORIENTED_EDGE ( 'NONE', *, *, #67524, .F. ) ; +#44256 = AXIS2_PLACEMENT_3D ( 'NONE', #72469, #22410, #22679 ) ; +#44257 = CARTESIAN_POINT ( 'NONE', ( 3.360497072202816200, 30.93250300240228900, -28.25438406275898700 ) ) ; +#44258 = CIRCLE ( 'NONE', #11487, 9.500000000000099500 ) ; +#44259 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147100, 61.52858243452073600, -28.70555803803030800 ) ) ; +#44260 = AXIS2_PLACEMENT_3D ( 'NONE', #7365, #32150, #50604 ) ; +#44262 = VERTEX_POINT ( 'NONE', #34741 ) ; +#44261 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44263 = EDGE_CURVE ( 'NONE', #18860, #19205, #39798, .T. ) ; +#44264 = ORIENTED_EDGE ( 'NONE', *, *, #76557, .F. ) ; +#44265 = AXIS2_PLACEMENT_3D ( 'NONE', #56944, #50907, #44630 ) ; +#44266 = AXIS2_PLACEMENT_3D ( 'NONE', #39683, #2411, #45909 ) ; +#44267 = FACE_OUTER_BOUND ( 'NONE', #61853, .T. ) ; +#44268 = ADVANCED_FACE ( 'NONE', ( #69440 ), #41236, .F. ) ; +#44269 = CONICAL_SURFACE ( 'NONE', #51772, 10.00000000000009200, 0.7853981633974447300 ) ; +#44270 = ORIENTED_EDGE ( 'NONE', *, *, #67991, .T. ) ; +#44271 = ORIENTED_EDGE ( 'NONE', *, *, #19592, .T. ) ; +#44272 = EDGE_LOOP ( 'NONE', ( #44399, #22800, #25554, #30134 ) ) ; +#44273 = ORIENTED_EDGE ( 'NONE', *, *, #59524, .F. ) ; +#44274 = ORIENTED_EDGE ( 'NONE', *, *, #59538, .F. ) ; +#44275 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510924600, 41.12856921007282600, -28.37063977681169300 ) ) ; +#44276 = ORIENTED_EDGE ( 'NONE', *, *, #77057, .F. ) ; +#44277 = ADVANCED_FACE ( 'NONE', ( #32452 ), #47029, .F. ) ; +#44278 = FACE_OUTER_BOUND ( 'NONE', #21275, .T. ) ; +#44279 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 61.33333333333334300, -3.705558038030004400 ) ) ; +#44280 = EDGE_LOOP ( 'NONE', ( #37174, #63025, #17955, #17461 ) ) ; +#44281 = ORIENTED_EDGE ( 'NONE', *, *, #50733, .T. ) ; +#44282 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519700, 75.79999999999982700, -28.63843632546337800 ) ) ; +#44283 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 26.33333333333334600, -5.205558038030008400 ) ) ; +#44285 = VERTEX_POINT ( 'NONE', #29060 ) ; +#44284 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74744, #203, #56226, #18968 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464073500, 0.001179659862024491500 ), + .UNSPECIFIED. ) ; +#44286 = FACE_OUTER_BOUND ( 'NONE', #66156, .T. ) ; +#44287 = AXIS2_PLACEMENT_3D ( 'NONE', #65735, #28499, #71995 ) ; +#44288 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883553300, 41.39435118792236100, -28.41114655922301700 ) ) ; +#44289 = ADVANCED_FACE ( 'NONE', ( #15914 ), #35286, .T. ) ; +#44290 = ORIENTED_EDGE ( 'NONE', *, *, #11407, .T. ) ; +#44291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44292 = ADVANCED_FACE ( 'NONE', ( #48967 ), #25372, .T. ) ; +#44293 = CIRCLE ( 'NONE', #30407, 10.50000000000009600 ) ; +#44294 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 63.66666666666665700, 8.320721403598824400 ) ) ; +#44295 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 26.44142842854307300, -28.20555803802994200 ) ) ; +#44296 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844090100, 9.793627346013273900, -28.24165217761325400 ) ) ; +#44297 = AXIS2_PLACEMENT_3D ( 'NONE', #62961, #25705, #69188 ) ; +#44298 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4214, #41476, #53978, #16731 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.336808689942017700E-019, 0.001246264537621164600 ), + .UNSPECIFIED. ) ; +#44299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44300 = CARTESIAN_POINT ( 'NONE', ( -15.78330646519587800, 70.79999999999998300, -28.32841359973438200 ) ) ; +#44301 = ADVANCED_FACE ( 'NONE', ( #13973 ), #45048, .T. ) ; +#44302 = EDGE_CURVE ( 'NONE', #30197, #44206, #61680, .T. ) ; +#44303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44304 = AXIS2_PLACEMENT_3D ( 'NONE', #1569, #7818, #38820 ) ; +#44305 = FACE_OUTER_BOUND ( 'NONE', #53138, .T. ) ; +#44306 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175400, 51.13951010012876000, -28.36889022317247100 ) ) ; +#44307 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344350900, 31.17701665379241800, -28.20555803802996000 ) ) ; +#44308 = CONICAL_SURFACE ( 'NONE', #70742, 10.00000000000009400, 0.7853981633974447300 ) ; +#44309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44311 = CARTESIAN_POINT ( 'NONE', ( -2.881064473890917000, 80.49763722318510900, -28.32100408376079800 ) ) ; +#44312 = ORIENTED_EDGE ( 'NONE', *, *, #26796, .T. ) ; +#44313 = CARTESIAN_POINT ( 'NONE', ( -4.469863111190365500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#44314 = ORIENTED_EDGE ( 'NONE', *, *, #42367, .F. ) ; +#44315 = CONICAL_SURFACE ( 'NONE', #71287, 10.50000000000009600, 0.7853981633974482800 ) ; +#44316 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534557800, 30.10079448659599800, -28.70555803802995200 ) ) ; +#44317 = CARTESIAN_POINT ( 'NONE', ( 2.785741443455842100, 60.07527064970108200, -28.39317435246143600 ) ) ; +#44318 = EDGE_LOOP ( 'NONE', ( #47474, #18480, #77545 ) ) ; +#44319 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6476, #49954, #12769 ), + ( #56239, #18981, #62516 ), + ( #25261, #68767, #31518 ), + ( #75030, #37731, #477 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 4.687972405330763000, 4.712388980384689700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9998509762273990500, 1.000000000000000000), + ( 1.000000000000000000, 0.9999503143911578900, 1.000000000000000000), + ( 1.000000000000000000, 1.000000001323388100, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#44320 = CARTESIAN_POINT ( 'NONE', ( 11.72076650305811400, 90.09951448976248400, -28.63282631410047700 ) ) ; +#44321 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44322 = CIRCLE ( 'NONE', #11434, 10.50000000000009600 ) ; +#44323 = CIRCLE ( 'NONE', #29368, 9.500000000000097700 ) ; +#44325 = EDGE_CURVE ( 'NONE', #42026, #17621, #10900, .T. ) ; +#44324 = EDGE_LOOP ( 'NONE', ( #23915, #26024, #2877, #78532 ) ) ; +#44326 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 67.16666666666667100, -9.205558038030003900 ) ) ; +#44327 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943310400, 24.54999999999998600, -28.70555803802994200 ) ) ; +#44328 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#44329 = EDGE_CURVE ( 'NONE', #38334, #3478, #30538, .T. ) ; +#44330 = CARTESIAN_POINT ( 'NONE', ( -15.85864231129048300, 14.05000000000000600, -28.50266868976635600 ) ) ; +#44331 = CONICAL_SURFACE ( 'NONE', #59370, 10.00000000000009200, 0.7853981633974447300 ) ; +#44332 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736718000, 45.54999999999999700, -28.70555803802996700 ) ) ; +#44333 = ORIENTED_EDGE ( 'NONE', *, *, #35378, .F. ) ; +#44334 = EDGE_LOOP ( 'NONE', ( #60586, #28120, #9519, #63878 ) ) ; +#44335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44336 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701863500, 85.79999999999998300, -28.70555803802997700 ) ) ; +#44337 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44338 = EDGE_CURVE ( 'NONE', #35598, #23241, #77207, .T. ) ; +#44339 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596600, 73.65857157145701700, -28.37229765499279600 ) ) ; +#44340 = CONICAL_SURFACE ( 'NONE', #39399, 10.00000000000009600, 0.7853981633974447300 ) ; +#44341 = EDGE_CURVE ( 'NONE', #51526, #49759, #63631, .T. ) ; +#44342 = FACE_OUTER_BOUND ( 'NONE', #70440, .T. ) ; +#44343 = AXIS2_PLACEMENT_3D ( 'NONE', #49909, #12707, #56188 ) ; +#44344 = EDGE_LOOP ( 'NONE', ( #25047, #61673, #52817, #77699 ) ) ; +#44345 = EDGE_CURVE ( 'NONE', #31176, #33477, #62762, .T. ) ; +#44346 = VERTEX_POINT ( 'NONE', #55342 ) ; +#44347 = EDGE_LOOP ( 'NONE', ( #39948, #65569, #10785, #64292 ) ) ; +#44348 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44349 = ORIENTED_EDGE ( 'NONE', *, *, #68001, .F. ) ; +#44350 = CARTESIAN_POINT ( 'NONE', ( -17.37141821671362500, 80.16749699759769500, -28.25056166218020700 ) ) ; +#44351 = CIRCLE ( 'NONE', #80301, 10.50000000000009600 ) ; +#44352 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 32.33333333333333600, 5.722645192245503900 ) ) ; +#44353 = FACE_OUTER_BOUND ( 'NONE', #8618, .T. ) ; +#44354 = VERTEX_POINT ( 'NONE', #12122 ) ; +#44355 = AXIS2_PLACEMENT_3D ( 'NONE', #47300, #10084, #53593 ) ; +#44356 = EDGE_CURVE ( 'NONE', #5802, #15261, #48247, .T. ) ; +#44357 = EDGE_CURVE ( 'NONE', #42212, #22567, #17878, .T. ) ; +#44358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69391, #1110, #44591, #7361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.117499858742978600E-017, 0.001246264537621186500 ), + .UNSPECIFIED. ) ; +#44359 = EDGE_CURVE ( 'NONE', #10634, #15532, #78207, .T. ) ; +#44360 = ADVANCED_FACE ( 'NONE', ( #59720 ), #74317, .F. ) ; +#44361 = CONICAL_SURFACE ( 'NONE', #17981, 10.00000000000009400, 0.7853981633974447300 ) ; +#44362 = AXIS2_PLACEMENT_3D ( 'NONE', #18131, #61672, #24395 ) ; +#44363 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44364 = VERTEX_POINT ( 'NONE', #49867 ) ; +#44365 = CIRCLE ( 'NONE', #72572, 10.50000000000009600 ) ; +#44366 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736714400, 45.55000000000000400, -28.70555803802996700 ) ) ; +#44367 = EDGE_CURVE ( 'NONE', #70191, #4678, #28611, .T. ) ; +#44368 = ADVANCED_FACE ( 'NONE', ( #43143 ), #24667, .F. ) ; +#44369 = AXIS2_PLACEMENT_3D ( 'NONE', #3631, #16439, #3912 ) ; +#44370 = CARTESIAN_POINT ( 'NONE', ( -17.31587870724581500, 30.62316711109006900, -28.43418176890224900 ) ) ; +#44371 = ORIENTED_EDGE ( 'NONE', *, *, #40945, .T. ) ; +#44372 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 3.666666666666686500, -6.705558038030000400 ) ) ; +#44373 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965570000, 49.42298334620756600, -28.20555803802996700 ) ) ; +#44374 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#44375 = CIRCLE ( 'NONE', #52656, 10.00000000000009200 ) ; +#44376 = ORIENTED_EDGE ( 'NONE', *, *, #20958, .F. ) ; +#44377 = ADVANCED_FACE ( 'NONE', ( #57740 ), #72377, .F. ) ; +#44378 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500403000, 81.76337688193848400, -28.37223523914912000 ) ) ; +#44379 = CIRCLE ( 'NONE', #62912, 10.00000000000009200 ) ; +#44380 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 29.03085164125335300, -28.45573375118225100 ) ) ; +#44381 = CARTESIAN_POINT ( 'NONE', ( 18.62763710724224400, 2.744646741322335000, -25.58808874563529700 ) ) ; +#44382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44383 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609688800, 70.13716795162660800, -28.48697406221658900 ) ) ; +#44384 = ORIENTED_EDGE ( 'NONE', *, *, #11908, .T. ) ; +#44385 = FACE_OUTER_BOUND ( 'NONE', #59787, .T. ) ; +#44386 = AXIS2_PLACEMENT_3D ( 'NONE', #59614, #65873, #53332 ) ; +#44387 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#44388 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310635600, 71.49769010897038900, -28.61774594594309600 ) ) ; +#44389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36335, #73619, #42576, #5342 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.874864696301263600E-005, 0.0009376791149920949100 ), + .UNSPECIFIED. ) ; +#44390 = ORIENTED_EDGE ( 'NONE', *, *, #29199, .T. ) ; +#44391 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#44392 = ADVANCED_FACE ( 'NONE', ( #76236 ), #39221, .F. ) ; +#44393 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44394 = AXIS2_PLACEMENT_3D ( 'NONE', #8833, #52356, #15128 ) ; +#44395 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#44396 = CIRCLE ( 'NONE', #3533, 10.00000000000009400 ) ; +#44397 = LINE ( 'NONE', #16517, #59045 ) ; +#44398 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 38.16666666666668600, -2.545304000185620600 ) ) ; +#44399 = ORIENTED_EDGE ( 'NONE', *, *, #80507, .T. ) ; +#44400 = CARTESIAN_POINT ( 'NONE', ( -8.466819876342322400, 55.79999999999999700, -28.37307693585060900 ) ) ; +#44401 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#44402 = EDGE_CURVE ( 'NONE', #23333, #50273, #33824, .T. ) ; +#44403 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26118, #38564, #51065, #13866 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999377605100E-007, 0.0006654947828621677600 ), + .UNSPECIFIED. ) ; +#44404 = AXIS2_PLACEMENT_3D ( 'NONE', #66681, #79197, #41909 ) ; +#44405 = ORIENTED_EDGE ( 'NONE', *, *, #65961, .F. ) ; +#44406 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 63.67681279774509300, -28.70555803803030800 ) ) ; +#44407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44408 = CARTESIAN_POINT ( 'NONE', ( 21.23898402147985800, 97.83898402148334100, -26.72626334856289200 ) ) ; +#44409 = VERTEX_POINT ( 'NONE', #44136 ) ; +#44410 = ADVANCED_FACE ( 'NONE', ( #65588 ), #6165, .T. ) ; +#44411 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44412 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#44413 = AXIS2_PLACEMENT_3D ( 'NONE', #1031, #44514, #7277 ) ; +#44414 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44415 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 70.16349705304867300, -28.30782889147482400 ) ) ; +#44416 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.23796787468685200, -28.38801640354855100 ) ) ; +#44417 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378045200, 50.77483928597535400, -28.57108397021914600 ) ) ; +#44418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44419 = CONICAL_SURFACE ( 'NONE', #70994, 10.00000000000009400, 0.7853981633974447300 ) ; +#44420 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#44421 = CARTESIAN_POINT ( 'NONE', ( -10.93543899802686400, 81.50961459723761500, -28.29483879644633500 ) ) ; +#44422 = CARTESIAN_POINT ( 'NONE', ( -3.073491842515247100, 80.22161678501181800, -28.29547179040448400 ) ) ; +#44423 = ORIENTED_EDGE ( 'NONE', *, *, #26571, .T. ) ; +#44424 = AXIS2_PLACEMENT_3D ( 'NONE', #38979, #1723, #45219 ) ; +#44425 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929813500, 85.79999999999998300, -28.70555803802997700 ) ) ; +#44426 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44427 = ORIENTED_EDGE ( 'NONE', *, *, #41069, .F. ) ; +#44428 = EDGE_LOOP ( 'NONE', ( #2217, #23496, #26340 ) ) ; +#44429 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819378900, 81.65075715145303500, -28.20555803802997700 ) ) ; +#44430 = ORIENTED_EDGE ( 'NONE', *, *, #23207, .F. ) ; +#44431 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576916500, 45.54999999999999700, -28.65220501466659500 ) ) ; +#44432 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44433 = CIRCLE ( 'NONE', #43230, 10.50000000000009600 ) ; +#44434 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44435 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44436 = ORIENTED_EDGE ( 'NONE', *, *, #55325, .T. ) ; +#44437 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000013300, 27.12623792124938800, -28.70555803802994200 ) ) ; +#44438 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#44439 = ORIENTED_EDGE ( 'NONE', *, *, #7662, .F. ) ; +#44440 = FACE_OUTER_BOUND ( 'NONE', #8693, .T. ) ; +#44441 = EDGE_CURVE ( 'NONE', #27421, #50347, #8082, .T. ) ; +#44442 = EDGE_LOOP ( 'NONE', ( #16541, #53670, #31810, #3252 ) ) ; +#44443 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 44.50000000000000700, 6.847000845227646500 ) ) ; +#44444 = ORIENTED_EDGE ( 'NONE', *, *, #19375, .F. ) ; +#44445 = EDGE_CURVE ( 'NONE', #27811, #67043, #19360, .T. ) ; +#44446 = CIRCLE ( 'NONE', #56333, 10.50000000000009600 ) ; +#44447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44448 = CIRCLE ( 'NONE', #23049, 10.00000000000009200 ) ; +#44449 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 9.666666666666687400, -5.535685056952199400 ) ) ; +#44450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44451 = EDGE_CURVE ( 'NONE', #6774, #35828, #4893, .T. ) ; +#44452 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#44453 = EDGE_LOOP ( 'NONE', ( #3641, #9004, #79163 ) ) ; +#44454 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23852, #29868, #42570, #5336 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.955157123626523900E-007, 0.0002959323803888981700 ), + .UNSPECIFIED. ) ; +#44455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44456 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 47.67143691309408400, -28.36981695106779700 ) ) ; +#44457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44458 = EDGE_CURVE ( 'NONE', #53919, #56790, #26638, .T. ) ; +#44459 = EDGE_CURVE ( 'NONE', #2685, #69411, #41199, .T. ) ; +#44460 = FACE_OUTER_BOUND ( 'NONE', #22773, .T. ) ; +#44461 = ORIENTED_EDGE ( 'NONE', *, *, #30601, .F. ) ; +#44462 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999561700, 51.78933626866493300, -28.53923937255185800 ) ) ; +#44463 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44464 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#44465 = ORIENTED_EDGE ( 'NONE', *, *, #24218, .T. ) ; +#44466 = CONICAL_SURFACE ( 'NONE', #47185, 10.50000000000009600, 0.7853981633974482800 ) ; +#44467 = AXIS2_PLACEMENT_3D ( 'NONE', #51020, #57320, #7520 ) ; +#44468 = EDGE_CURVE ( 'NONE', #48654, #42426, #71215, .T. ) ; +#44469 = EDGE_CURVE ( 'NONE', #59244, #73953, #56750, .T. ) ; +#44470 = ORIENTED_EDGE ( 'NONE', *, *, #15586, .F. ) ; +#44471 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#44472 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44473 = EDGE_CURVE ( 'NONE', #40425, #39864, #10071, .T. ) ; +#44474 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44475 = CARTESIAN_POINT ( 'NONE', ( 11.19152310112212900, 39.57332680091204900, -28.37233769390153500 ) ) ; +#44476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44477 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44478 = AXIS2_PLACEMENT_3D ( 'NONE', #52327, #15104, #58625 ) ; +#44479 = CARTESIAN_POINT ( 'NONE', ( 15.48942937238581100, 92.57885858749000400, -28.66147705688780400 ) ) ; +#44480 = CIRCLE ( 'NONE', #12506, 9.500000000000097700 ) ; +#44481 = EDGE_LOOP ( 'NONE', ( #78370, #71671, #63867 ) ) ; +#44482 = CARTESIAN_POINT ( 'NONE', ( 9.487278546916586600, 71.47860033657553900, -28.56001054660934500 ) ) ; +#44483 = ADVANCED_FACE ( 'NONE', ( #22713 ), #68446, .T. ) ; +#44484 = CARTESIAN_POINT ( 'NONE', ( -19.45048326881743300, 1.098303135583050800, -23.30554774164344800 ) ) ; +#44485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44487 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 27.50972971738994100, -28.70555803802994500 ) ) ; +#44488 = ADVANCED_FACE ( 'NONE', ( #55785 ), #35387, .F. ) ; +#44489 = ORIENTED_EDGE ( 'NONE', *, *, #1803, .F. ) ; +#44490 = AXIS2_PLACEMENT_3D ( 'NONE', #24612, #68117, #30875 ) ; +#44491 = AXIS2_PLACEMENT_3D ( 'NONE', #47595, #10378, #53878 ) ; +#44492 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5571, #67858, #5846, #49317 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001137779926879155200, 0.0003808516268248754600 ), + .UNSPECIFIED. ) ; +#44493 = AXIS2_PLACEMENT_3D ( 'NONE', #36263, #79796, #42504 ) ; +#44494 = ADVANCED_FACE ( 'NONE', ( #20760 ), #2227, .T. ) ; +#44495 = CONICAL_SURFACE ( 'NONE', #12996, 10.50000000000009800, 0.7853981633974518300 ) ; +#44496 = FACE_OUTER_BOUND ( 'NONE', #63144, .T. ) ; +#44497 = EDGE_LOOP ( 'NONE', ( #73768, #19800, #75663 ) ) ; +#44498 = ORIENTED_EDGE ( 'NONE', *, *, #65623, .T. ) ; +#44499 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 15.50000000000002100, -7.061964498581016200 ) ) ; +#44500 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44501 = EDGE_LOOP ( 'NONE', ( #10225, #9732, #7681, #63172 ) ) ; +#44502 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528424400, 28.63131911501858400, -28.51286550264480400 ) ) ; +#44503 = ORIENTED_EDGE ( 'NONE', *, *, #30482, .F. ) ; +#44504 = VERTEX_POINT ( 'NONE', #64049 ) ; +#44505 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47532, #4054, #60102, #22825 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002138778209401257200 ), + .UNSPECIFIED. ) ; +#44506 = EDGE_LOOP ( 'NONE', ( #6246, #73229, #13574, #72718 ) ) ; +#44507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44509 = AXIS2_PLACEMENT_3D ( 'NONE', #2907, #46399, #9143 ) ; +#44510 = ORIENTED_EDGE ( 'NONE', *, *, #45782, .T. ) ; +#44511 = EDGE_CURVE ( 'NONE', #39861, #14568, #4203, .T. ) ; +#44512 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#44513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44515 = VERTEX_POINT ( 'NONE', #57766 ) ; +#44516 = CIRCLE ( 'NONE', #13690, 9.500000000000099500 ) ; +#44517 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44518 = VERTEX_POINT ( 'NONE', #45473 ) ; +#44519 = EDGE_CURVE ( 'NONE', #25229, #42164, #70382, .T. ) ; +#44520 = ORIENTED_EDGE ( 'NONE', *, *, #19612, .F. ) ; +#44521 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 70.13716795162659400, -28.48697406221667400 ) ) ; +#44522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44523 = CIRCLE ( 'NONE', #62594, 9.500000000000097700 ) ; +#44524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44525 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390573200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#44526 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44527 = ORIENTED_EDGE ( 'NONE', *, *, #10106, .F. ) ; +#44528 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76093, #14090, #70095, #32841 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.874864696301229700E-005, 0.0009376791149930110600 ), + .UNSPECIFIED. ) ; +#44529 = AXIS2_PLACEMENT_3D ( 'NONE', #12397, #55880, #18631 ) ; +#44530 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155513200, 65.79999999999968500, -28.20555803803030800 ) ) ; +#44531 = CONICAL_SURFACE ( 'NONE', #49427, 10.00000000000009400, 0.7853981633974447300 ) ; +#44532 = EDGE_LOOP ( 'NONE', ( #80502, #27491, #70094, #57113 ) ) ; +#44533 = ORIENTED_EDGE ( 'NONE', *, *, #25160, .T. ) ; +#44534 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 59.16666666666668600, 0.1341879241256129200 ) ) ; +#44535 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#44536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80717, #37168, #6194, #49665 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002333577134203751300 ), + .UNSPECIFIED. ) ; +#44537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44538 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 24.16666666666667100, 0.9380355014189834000 ) ) ; +#44539 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019300500, 74.79999999999928700, -28.70555803803047500 ) ) ; +#44540 = EDGE_CURVE ( 'NONE', #78943, #70832, #42270, .T. ) ; +#44541 = CONICAL_SURFACE ( 'NONE', #72916, 10.50000000000009400, 0.7853981633974500600 ) ; +#44542 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 61.50000000000001400, -9.258116921287651700 ) ) ; +#44543 = ORIENTED_EDGE ( 'NONE', *, *, #27611, .T. ) ; +#44544 = ORIENTED_EDGE ( 'NONE', *, *, #15098, .F. ) ; +#44545 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180452700, 71.65075715145293600, -28.20555803802997700 ) ) ; +#44546 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 57.94142842854307000, -28.20555803802997700 ) ) ; +#44547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44549 = FACE_OUTER_BOUND ( 'NONE', #18470, .T. ) ; +#44550 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995400, 27.91684396980717200, -28.70555803802998100 ) ) ; +#44551 = CONICAL_SURFACE ( 'NONE', #21920, 10.00000000000009200, 0.7853981633974447300 ) ; +#44552 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180789400, 69.94924284854687400, -28.20555803802997700 ) ) ; +#44553 = VERTEX_POINT ( 'NONE', #39528 ) ; +#44555 = EDGE_CURVE ( 'NONE', #10553, #36904, #27864, .T. ) ; +#44554 = ORIENTED_EDGE ( 'NONE', *, *, #25060, .T. ) ; +#44556 = CARTESIAN_POINT ( 'NONE', ( -16.56643609059974800, 44.37492275335523600, -28.58387515229125200 ) ) ; +#44557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44558 = VERTEX_POINT ( 'NONE', #14257 ) ; +#44559 = CONICAL_SURFACE ( 'NONE', #48076, 10.50000000000009600, 0.7853981633974518300 ) ; +#44560 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 80.90033558196108700, -28.70555803802997700 ) ) ; +#44561 = ORIENTED_EDGE ( 'NONE', *, *, #79447, .F. ) ; +#44562 = ORIENTED_EDGE ( 'NONE', *, *, #48665, .T. ) ; +#44563 = CARTESIAN_POINT ( 'NONE', ( 3.499999999986115100, 50.90050506339297000, -28.70555803803014400 ) ) ; +#44564 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 75.79999999999982700, -28.20555803803014400 ) ) ; +#44565 = VERTEX_POINT ( 'NONE', #21062 ) ; +#44566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67736, #11725, #55207, #30500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852063000, 0.0009376791149930222300 ), + .UNSPECIFIED. ) ; +#44567 = CARTESIAN_POINT ( 'NONE', ( 3.177655021797036700, 7.660694734812120800, -28.43770179755625800 ) ) ; +#44568 = ORIENTED_EDGE ( 'NONE', *, *, #67044, .T. ) ; +#44569 = VERTEX_POINT ( 'NONE', #14783 ) ; +#44570 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985164700, 44.59761904761935400, -28.70555803802996700 ) ) ; +#44571 = ORIENTED_EDGE ( 'NONE', *, *, #36044, .T. ) ; +#44572 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372567000, 12.16464174796073600, -28.53896444442197500 ) ) ; +#44573 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230949900, 50.28860447109612200, -28.53900456328628000 ) ) ; +#44574 = ADVANCED_FACE ( 'NONE', ( #53847 ), #16866, .T. ) ; +#44575 = CARTESIAN_POINT ( 'NONE', ( 15.86747754071088000, 9.011077667004025600, -28.65663056868666900 ) ) ; +#44576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44577 = AXIS2_PLACEMENT_3D ( 'NONE', #73162, #35878, #79409 ) ; +#44578 = EDGE_LOOP ( 'NONE', ( #47304, #68286, #52319, #17263 ) ) ; +#44579 = EDGE_CURVE ( 'NONE', #22183, #49213, #33398, .T. ) ; +#44580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44581 = EDGE_CURVE ( 'NONE', #57912, #28268, #51853, .T. ) ; +#44582 = CARTESIAN_POINT ( 'NONE', ( 3.464812346017064100, 9.406791769321971600, -28.68794773163824600 ) ) ; +#44583 = CARTESIAN_POINT ( 'NONE', ( 16.68767301991442100, 77.07041105632814000, -28.56367862433819800 ) ) ; +#44584 = EDGE_CURVE ( 'NONE', #79839, #48096, #49907, .T. ) ; +#44585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44586 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44587 = FACE_OUTER_BOUND ( 'NONE', #72673, .T. ) ; +#44588 = AXIS2_PLACEMENT_3D ( 'NONE', #4155, #47635, #10418 ) ; +#44589 = ORIENTED_EDGE ( 'NONE', *, *, #73580, .F. ) ; +#44590 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 65.00000000000000000, 6.794441961969995200 ) ) ; +#44591 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925614400, 48.81967837323414000, -28.55467576046958200 ) ) ; +#44592 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 50.02242369685793500, -28.53861367218592400 ) ) ; +#44593 = ORIENTED_EDGE ( 'NONE', *, *, #40305, .T. ) ; +#44594 = ORIENTED_EDGE ( 'NONE', *, *, #39496, .F. ) ; +#44595 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#44596 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714282000, 43.67681279774500800, -28.70555803802997700 ) ) ; +#44597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44598 = CONICAL_SURFACE ( 'NONE', #64646, 10.00000000000009200, 0.7853981633974447300 ) ; +#44599 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034401200, 17.92298334620717900, -28.20555803803002000 ) ) ; +#44600 = AXIS2_PLACEMENT_3D ( 'NONE', #43786, #6555, #50028 ) ; +#44601 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#44603 = EDGE_LOOP ( 'NONE', ( #67576, #43858, #58434, #31371 ) ) ; +#44602 = AXIS2_PLACEMENT_3D ( 'NONE', #2824, #46317, #9063 ) ; +#44604 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44605 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44606 = VERTEX_POINT ( 'NONE', #77336 ) ; +#44607 = ADVANCED_FACE ( 'NONE', ( #37271 ), #14908, .T. ) ; +#44608 = EDGE_CURVE ( 'NONE', #12788, #30550, #31472, .T. ) ; +#44609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44610 = FACE_OUTER_BOUND ( 'NONE', #48039, .T. ) ; +#44611 = ORIENTED_EDGE ( 'NONE', *, *, #5215, .F. ) ; +#44612 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.66749699759768800, -28.20555803802994200 ) ) ; +#44613 = VERTEX_POINT ( 'NONE', #65125 ) ; +#44614 = EDGE_CURVE ( 'NONE', #59983, #5879, #291, .T. ) ; +#44615 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 30.16666666666668600, -9.205558038030003900 ) ) ; +#44616 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#44617 = AXIS2_PLACEMENT_3D ( 'NONE', #74785, #62273, #37479 ) ; +#44618 = AXIS2_PLACEMENT_3D ( 'NONE', #21348, #64877, #27604 ) ; +#44619 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 75.79999999999998300, -28.20555803802997700 ) ) ; +#44620 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#44621 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31266, #18747, #49971, #12780 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736308633600E-007, 0.0008693051355035876400 ), + .UNSPECIFIED. ) ; +#44622 = CIRCLE ( 'NONE', #69198, 10.00000000000009200 ) ; +#44623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44624 = CIRCLE ( 'NONE', #55145, 10.00000000000009600 ) ; +#44625 = VERTEX_POINT ( 'NONE', #15331 ) ; +#44626 = AXIS2_PLACEMENT_3D ( 'NONE', #49368, #12159, #55651 ) ; +#44627 = CARTESIAN_POINT ( 'NONE', ( 17.03295546792551800, 73.19758746877413100, -28.49829281932971300 ) ) ; +#44628 = ORIENTED_EDGE ( 'NONE', *, *, #50566, .T. ) ; +#44629 = ORIENTED_EDGE ( 'NONE', *, *, #42224, .F. ) ; +#44630 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44632 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 1.499999999999993800, 6.847000845227641200 ) ) ; +#44633 = CONICAL_SURFACE ( 'NONE', #33677, 10.50000000000009600, 0.7853981633974482800 ) ; +#44634 = ORIENTED_EDGE ( 'NONE', *, *, #66333, .F. ) ; +#44635 = FACE_OUTER_BOUND ( 'NONE', #15375, .T. ) ; +#44636 = AXIS2_PLACEMENT_3D ( 'NONE', #271, #68823, #12822 ) ; +#44637 = ORIENTED_EDGE ( 'NONE', *, *, #53705, .T. ) ; +#44638 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155506100, 75.79999999999967000, -28.20555803803030800 ) ) ; +#44639 = VERTEX_POINT ( 'NONE', #3056 ) ; +#44640 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#44641 = VERTEX_POINT ( 'NONE', #21852 ) ; +#44642 = FACE_OUTER_BOUND ( 'NONE', #29038, .T. ) ; +#44643 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44644 = ORIENTED_EDGE ( 'NONE', *, *, #57592, .F. ) ; +#44645 = EDGE_LOOP ( 'NONE', ( #50043, #44868, #74068, #63533, #25089 ) ) ; +#44646 = ORIENTED_EDGE ( 'NONE', *, *, #1014, .F. ) ; +#44647 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541608900, 30.51125751638928200, -28.53740755999535500 ) ) ; +#44648 = ORIENTED_EDGE ( 'NONE', *, *, #4824, .T. ) ; +#44649 = CARTESIAN_POINT ( 'NONE', ( 19.66314699436132000, 0.6736905152627474800, -22.31468412465982400 ) ) ; +#44650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44651 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44652 = AXIS2_PLACEMENT_3D ( 'NONE', #31059, #43528, #18807 ) ; +#44653 = EDGE_LOOP ( 'NONE', ( #33031, #60810, #42519 ) ) ; +#44654 = CARTESIAN_POINT ( 'NONE', ( -16.52197549498861700, 18.12306210240191700, -28.54786661478390300 ) ) ; +#44655 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.84510448120794400, -28.37193179497693400 ) ) ; +#44656 = ADVANCED_FACE ( 'NONE', ( #66502 ), #29537, .T. ) ; +#44657 = CARTESIAN_POINT ( 'NONE', ( 9.279102202939078800, 51.50050326225942100, -28.63287226700147800 ) ) ; +#44658 = ORIENTED_EDGE ( 'NONE', *, *, #60618, .F. ) ; +#44659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44660 = FACE_OUTER_BOUND ( 'NONE', #46389, .T. ) ; +#44661 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44662 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 35.99999999999999300, -1.205558038030002800 ) ) ; +#44663 = EDGE_LOOP ( 'NONE', ( #16471, #62141, #35689, #35913 ) ) ; +#44664 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44666 = EDGE_LOOP ( 'NONE', ( #31293, #39830, #10290, #56327 ) ) ; +#44667 = ORIENTED_EDGE ( 'NONE', *, *, #1730, .F. ) ; +#44668 = ORIENTED_EDGE ( 'NONE', *, *, #34034, .T. ) ; +#44669 = ORIENTED_EDGE ( 'NONE', *, *, #34386, .T. ) ; +#44670 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44672 = ORIENTED_EDGE ( 'NONE', *, *, #78861, .T. ) ; +#44671 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45168, #51155, #63748, #51431 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283327314500, 0.0007287255810275607500 ), + .UNSPECIFIED. ) ; +#44673 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 90.24722181384564100, -28.70555803802999500 ) ) ; +#44674 = FACE_OUTER_BOUND ( 'NONE', #31017, .T. ) ; +#44675 = CARTESIAN_POINT ( 'NONE', ( 17.10880858161157600, 95.81761716322232300, -27.84387079877612700 ) ) ; +#44676 = ADVANCED_FACE ( 'NONE', ( #64567 ), #77187, .F. ) ; +#44677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44678 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999989300, 69.81066373133485600, -28.53923937255189000 ) ) ; +#44679 = ORIENTED_EDGE ( 'NONE', *, *, #67657, .T. ) ; +#44680 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459416700, 72.51973550835650400, -28.70555803803014100 ) ) ; +#44681 = ORIENTED_EDGE ( 'NONE', *, *, #2676, .F. ) ; +#44682 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#44683 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 58.62623792124938400, -28.70555803802997700 ) ) ; +#44684 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 70.10230989102910800, -28.61774594594330900 ) ) ; +#44685 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44686 = CARTESIAN_POINT ( 'NONE', ( 16.27330681499611100, 94.62716193550224400, -28.23689381550174100 ) ) ; +#44687 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#44688 = CIRCLE ( 'NONE', #36358, 9.500000000000097700 ) ; +#44689 = ORIENTED_EDGE ( 'NONE', *, *, #61468, .F. ) ; +#44690 = ADVANCED_FACE ( 'NONE', ( #46004 ), #44045, .F. ) ; +#44691 = EDGE_CURVE ( 'NONE', #71006, #28981, #13405, .T. ) ; +#44692 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44693 = ORIENTED_EDGE ( 'NONE', *, *, #20356, .T. ) ; +#44694 = CARTESIAN_POINT ( 'NONE', ( -17.37150777124396900, 51.43250300240229900, -28.25053031809458700 ) ) ; +#44695 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034432000, 41.67701665379240000, -28.20555803802997400 ) ) ; +#44696 = VERTEX_POINT ( 'NONE', #3331 ) ; +#44697 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 60.90033558196107300, -28.70555803802997700 ) ) ; +#44698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44699 = PLANE ( 'NONE', #50100 ) ; +#44700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44701 = EDGE_CURVE ( 'NONE', #28184, #27550, #79700, .T. ) ; +#44702 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44703 = ADVANCED_FACE ( 'NONE', ( #60664 ), #11012, .F. ) ; +#44704 = EDGE_CURVE ( 'NONE', #39390, #50101, #65270, .T. ) ; +#44705 = FACE_OUTER_BOUND ( 'NONE', #53511, .T. ) ; +#44706 = CIRCLE ( 'NONE', #9782, 10.00000000000009400 ) ; +#44707 = ORIENTED_EDGE ( 'NONE', *, *, #74192, .F. ) ; +#44708 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 7.500000000000000900, 2.454695999814385600 ) ) ; +#44709 = AXIS2_PLACEMENT_3D ( 'NONE', #13465, #56962, #19705 ) ; +#44710 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966700, 9.940690926013795400, -28.35186440610855000 ) ) ; +#44711 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567169600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#44712 = EDGE_CURVE ( 'NONE', #2762, #67137, #50732, .T. ) ; +#44713 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965628600, 17.92298334620783600, -28.20555803802992800 ) ) ; +#44714 = EDGE_CURVE ( 'NONE', #39956, #19932, #36308, .T. ) ; +#44715 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.39610994602603500, -28.37519436813180100 ) ) ; +#44716 = AXIS2_PLACEMENT_3D ( 'NONE', #75006, #37711, #460 ) ; +#44717 = CIRCLE ( 'NONE', #50796, 10.00000000000009200 ) ; +#44718 = ORIENTED_EDGE ( 'NONE', *, *, #59924, .T. ) ; +#44719 = ORIENTED_EDGE ( 'NONE', *, *, #41656, .T. ) ; +#44720 = AXIS2_PLACEMENT_3D ( 'NONE', #33663, #8614, #2628 ) ; +#44721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44722 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12301, #37015, #62075, #24797 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921143049800E-007, 0.0004084731003434223900 ), + .UNSPECIFIED. ) ; +#44723 = FACE_OUTER_BOUND ( 'NONE', #3307, .T. ) ; +#44724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44725 = ORIENTED_EDGE ( 'NONE', *, *, #6031, .T. ) ; +#44726 = AXIS2_PLACEMENT_3D ( 'NONE', #60331, #72830, #16796 ) ; +#44727 = ORIENTED_EDGE ( 'NONE', *, *, #5661, .F. ) ; +#44728 = ORIENTED_EDGE ( 'NONE', *, *, #70012, .F. ) ; +#44729 = ORIENTED_EDGE ( 'NONE', *, *, #31304, .T. ) ; +#44730 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 38.92298334620762300, -28.20555803802996700 ) ) ; +#44731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70932, #46151, #64990, #27716 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104962598600, 0.0007670610367938010600 ), + .UNSPECIFIED. ) ; +#44733 = ORIENTED_EDGE ( 'NONE', *, *, #57337, .T. ) ; +#44732 = EDGE_CURVE ( 'NONE', #3808, #54505, #62593, .T. ) ; +#44734 = AXIS2_PLACEMENT_3D ( 'NONE', #28013, #34226, #40469 ) ; +#44735 = AXIS2_PLACEMENT_3D ( 'NONE', #37614, #6626, #25143 ) ; +#44736 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725305700, 35.05000000000000400, -28.20555803802995200 ) ) ; +#44737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44738 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44740 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48627, #5139, #11415, #54904 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185221833408400E-007, 0.0006654852833079228600 ), + .UNSPECIFIED. ) ; +#44741 = FACE_OUTER_BOUND ( 'NONE', #33459, .T. ) ; +#44743 = VERTEX_POINT ( 'NONE', #47363 ) ; +#44742 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188353100, 39.20564881207762700, -28.41114655922298500 ) ) ; +#44744 = ORIENTED_EDGE ( 'NONE', *, *, #47702, .T. ) ; +#44745 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754100, 27.50972971738994100, -28.70555803802994500 ) ) ; +#44746 = ORIENTED_EDGE ( 'NONE', *, *, #26450, .F. ) ; +#44747 = EDGE_LOOP ( 'NONE', ( #69683, #23685, #33246, #75757 ) ) ; +#44748 = VERTEX_POINT ( 'NONE', #41404 ) ; +#44749 = VERTEX_POINT ( 'NONE', #16669 ) ; +#44750 = AXIS2_PLACEMENT_3D ( 'NONE', #42993, #5743, #49229 ) ; +#44751 = CARTESIAN_POINT ( 'NONE', ( -17.92159627810889000, 4.155520326980522800, -26.82603126540366400 ) ) ; +#44752 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44754 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444413000, 69.72166103827298400, -28.53892303408254000 ) ) ; +#44755 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44756 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#44757 = CIRCLE ( 'NONE', #60330, 10.50000000000009600 ) ; +#44758 = ORIENTED_EDGE ( 'NONE', *, *, #53239, .F. ) ; +#44759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34608, #22088, #47062, #9839 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520705200, 0.004414519045340990100 ), + .UNSPECIFIED. ) ; +#44761 = ADVANCED_FACE ( 'NONE', ( #47958 ), #42119, .T. ) ; +#44762 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.23237991241951100, -28.26633708900881500 ) ) ; +#44763 = AXIS2_PLACEMENT_3D ( 'NONE', #6301, #49780, #12575 ) ; +#44764 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 90.34267608797600200, -28.20555803802997700 ) ) ; +#44765 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 13.33333333333335000, 5.722645192245503900 ) ) ; +#44766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44767 = CIRCLE ( 'NONE', #7628, 10.50000000000009200 ) ; +#44768 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492447900, 28.07379779496243100, -28.70555803802995200 ) ) ; +#44769 = EDGE_LOOP ( 'NONE', ( #51781, #68983, #33880 ) ) ; +#44770 = CARTESIAN_POINT ( 'NONE', ( 15.68514033016294600, 45.54999999999999700, -28.35375031073498800 ) ) ; +#44771 = ORIENTED_EDGE ( 'NONE', *, *, #57487, .T. ) ; +#44772 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148360700, 23.59761904761933900, -28.70555803802994200 ) ) ; +#44773 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44774 = ADVANCED_FACE ( 'NONE', ( #79158 ), #9014, .F. ) ; +#44775 = AXIS2_PLACEMENT_3D ( 'NONE', #35379, #10603, #47826 ) ; +#44776 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957533900, 21.59027028261001700, -28.70555803802993500 ) ) ; +#44777 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13522, #50442, #63296, #26033 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169801700E-007, 0.001119324643800066700 ), + .UNSPECIFIED. ) ; +#44778 = CARTESIAN_POINT ( 'NONE', ( 9.487410011451164100, 60.12140959736002100, -28.55996453402207200 ) ) ; +#44779 = EDGE_CURVE ( 'NONE', #78358, #43413, #25616, .T. ) ; +#44780 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44781 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#44782 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 30.93250300240229200, -28.20555803802996700 ) ) ; +#44783 = AXIS2_PLACEMENT_3D ( 'NONE', #10968, #66987, #29753 ) ; +#44784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44785 = CONICAL_SURFACE ( 'NONE', #26587, 10.50000000000009600, 0.7853981633974482800 ) ; +#44786 = ADVANCED_FACE ( 'NONE', ( #75234 ), #53915, .T. ) ; +#44787 = ORIENTED_EDGE ( 'NONE', *, *, #6366, .T. ) ; +#44788 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388100, 20.43650294695131500, -28.30782889147481300 ) ) ; +#44789 = ORIENTED_EDGE ( 'NONE', *, *, #57412, .F. ) ; +#44790 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44791 = EDGE_LOOP ( 'NONE', ( #22059, #49656, #74805 ) ) ; +#44792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44793 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 30.93650294695131500, -28.30782889147481600 ) ) ; +#44794 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44795 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428569400, 10.02858243452105900, -28.70555803802994200 ) ) ; +#44796 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44797 = ADVANCED_FACE ( 'NONE', ( #12971 ), #23664, .F. ) ; +#44798 = VECTOR ( 'NONE', #45927, 1000.000000000000000 ) ; +#44799 = ORIENTED_EDGE ( 'NONE', *, *, #72653, .T. ) ; +#44800 = ORIENTED_EDGE ( 'NONE', *, *, #51130, .T. ) ; +#44801 = EDGE_CURVE ( 'NONE', #68363, #24123, #56729, .T. ) ; +#44802 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44803 = VERTEX_POINT ( 'NONE', #78970 ) ; +#44804 = CIRCLE ( 'NONE', #6290, 10.00000000000009400 ) ; +#44805 = EDGE_CURVE ( 'NONE', #62433, #34397, #21854, .T. ) ; +#44806 = VERTEX_POINT ( 'NONE', #54450 ) ; +#44807 = ORIENTED_EDGE ( 'NONE', *, *, #46984, .T. ) ; +#44808 = EDGE_LOOP ( 'NONE', ( #23411, #32439, #58466, #31188 ) ) ; +#44809 = ORIENTED_EDGE ( 'NONE', *, *, #73968, .T. ) ; +#44810 = ORIENTED_EDGE ( 'NONE', *, *, #39087, .F. ) ; +#44811 = ADVANCED_FACE ( 'NONE', ( #40177 ), #54773, .T. ) ; +#44812 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 57.00000000000001400, -1.205558038030002800 ) ) ; +#44813 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656962300, 80.94992009694570400, -28.43638873268705300 ) ) ; +#44814 = EDGE_CURVE ( 'NONE', #29278, #12346, #7363, .T. ) ; +#44815 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925621500, 21.28032162676580400, -28.55467576046954300 ) ) ; +#44816 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 22.00000000000001100, -1.205558038030005300 ) ) ; +#44817 = EDGE_CURVE ( 'NONE', #60076, #70202, #27563, .T. ) ; +#44818 = AXIS2_PLACEMENT_3D ( 'NONE', #35162, #16632, #53882 ) ; +#44819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44820 = FACE_OUTER_BOUND ( 'NONE', #25603, .T. ) ; +#44821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44822 = ORIENTED_EDGE ( 'NONE', *, *, #66974, .F. ) ; +#44823 = EDGE_LOOP ( 'NONE', ( #13373, #65212, #12340, #5161 ) ) ; +#44824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44825 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44826 = ORIENTED_EDGE ( 'NONE', *, *, #8637, .F. ) ; +#44827 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 59.33333333333334300, 4.294441961970000500 ) ) ; +#44828 = ORIENTED_EDGE ( 'NONE', *, *, #19375, .T. ) ; +#44829 = EDGE_LOOP ( 'NONE', ( #29880, #62220, #71381 ) ) ; +#44830 = ORIENTED_EDGE ( 'NONE', *, *, #28351, .T. ) ; +#44831 = ORIENTED_EDGE ( 'NONE', *, *, #65620, .F. ) ; +#44832 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#44833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44834 = FACE_OUTER_BOUND ( 'NONE', #28774, .T. ) ; +#44835 = AXIS2_PLACEMENT_3D ( 'NONE', #12310, #55795, #18547 ) ; +#44836 = EDGE_CURVE ( 'NONE', #44515, #43060, #73721, .T. ) ; +#44837 = EDGE_CURVE ( 'NONE', #35267, #18144, #7071, .T. ) ; +#44838 = CARTESIAN_POINT ( 'NONE', ( 2.254657264815473500, 20.50380841767820800, -28.64142799534453600 ) ) ; +#44839 = EDGE_CURVE ( 'NONE', #70193, #12763, #58680, .T. ) ; +#44840 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 80.34267608797600200, -28.20555803802997700 ) ) ; +#44841 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818145900, 89.94924284854691600, -28.20555803803031100 ) ) ; +#44842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76848, #33339, #45810, #8561 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353325962500E-007, 0.0007670609591621610100 ), + .UNSPECIFIED. ) ; +#44843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44845 = AXIS2_PLACEMENT_3D ( 'NONE', #45160, #7929, #51420 ) ; +#44846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44847 = CONICAL_SURFACE ( 'NONE', #43025, 10.00000000000009200, 0.7853981633974447300 ) ; +#44848 = ORIENTED_EDGE ( 'NONE', *, *, #21764, .F. ) ; +#44849 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239400, 42.02620220503713000, -28.70555803802996700 ) ) ; +#44850 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471852700, 30.96868088498121800, -28.51286550264511600 ) ) ; +#44851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44852 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44853 = EDGE_CURVE ( 'NONE', #79180, #33308, #71326, .T. ) ; +#44854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44855 = AXIS2_PLACEMENT_3D ( 'NONE', #8559, #33335, #70585 ) ; +#44856 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44857 = AXIS2_PLACEMENT_3D ( 'NONE', #33144, #33409, #20915 ) ; +#44858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57881, #39359, #70652, #33397 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867055907000E-007, 0.001076778502991277100 ), + .UNSPECIFIED. ) ; +#44859 = CARTESIAN_POINT ( 'NONE', ( -17.36049707220280100, 30.93250300240229200, -28.25438406275899100 ) ) ; +#44860 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528152600, 20.46868088498121800, -28.51286550264509900 ) ) ; +#44861 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#44862 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471300, 34.73928571352701800, -28.36868303842826900 ) ) ; +#44863 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 62.83333333333334300, -9.205558038030003900 ) ) ; +#44864 = PLANE ( 'NONE', #60557 ) ; +#44865 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217499100, 90.16054007504419600, -28.34042301926922700 ) ) ; +#44866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62781, #69013, #6981, #50471 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576486500 ), + .UNSPECIFIED. ) ; +#44867 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ; +#44868 = ORIENTED_EDGE ( 'NONE', *, *, #10106, .T. ) ; +#44869 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274726500, 45.54999999999998300, -28.20555803802996700 ) ) ; +#44870 = ORIENTED_EDGE ( 'NONE', *, *, #49775, .T. ) ; +#44871 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 51.78933626866496100, -28.53923937255171900 ) ) ; +#44872 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 65.79999999999998300, -28.20555803802997700 ) ) ; +#44873 = AXIS2_PLACEMENT_3D ( 'NONE', #26531, #57516, #32756 ) ; +#44874 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285725100, 43.67681279774500800, -28.70555803802997700 ) ) ; +#44875 = CARTESIAN_POINT ( 'NONE', ( -17.03244381443368000, 83.20063685273899500, -28.49841021997937300 ) ) ; +#44876 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34166, #21674, #59176, #21932 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720050340400E-007, 0.0002592600401780900000 ), + .UNSPECIFIED. ) ; +#44877 = FACE_OUTER_BOUND ( 'NONE', #47481, .T. ) ; +#44878 = AXIS2_PLACEMENT_3D ( 'NONE', #6220, #227, #43713 ) ; +#44879 = ORIENTED_EDGE ( 'NONE', *, *, #72244, .T. ) ; +#44880 = ORIENTED_EDGE ( 'NONE', *, *, #77873, .T. ) ; +#44881 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701879500, 75.79999999999999700, -28.70555803802997700 ) ) ; +#44882 = ADVANCED_FACE ( 'NONE', ( #21713 ), #19753, .F. ) ; +#44883 = EDGE_CURVE ( 'NONE', #25969, #50418, #36282, .T. ) ; +#44884 = CIRCLE ( 'NONE', #58362, 9.500000000000099500 ) ; +#44885 = ORIENTED_EDGE ( 'NONE', *, *, #79893, .F. ) ; +#44886 = AXIS2_PLACEMENT_3D ( 'NONE', #51802, #14584, #58093 ) ; +#44887 = ORIENTED_EDGE ( 'NONE', *, *, #65732, .F. ) ; +#44888 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44889 = EDGE_LOOP ( 'NONE', ( #3859, #29905, #50773, #34892 ) ) ; +#44890 = ADVANCED_FACE ( 'NONE', ( #38209 ), #50838, .F. ) ; +#44891 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 28.00000000000001100, 6.794441961969995200 ) ) ; +#44892 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655445700, 10.17701665379220800, -28.20555803802993500 ) ) ; +#44893 = EDGE_LOOP ( 'NONE', ( #58305, #32165, #2501 ) ) ; +#44894 = ORIENTED_EDGE ( 'NONE', *, *, #2724, .F. ) ; +#44895 = AXIS2_PLACEMENT_3D ( 'NONE', #16671, #60208, #22926 ) ; +#44896 = CONICAL_SURFACE ( 'NONE', #80184, 10.50000000000009400, 0.7853981633974482800 ) ; +#44897 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44898 = ADVANCED_FACE ( 'NONE', ( #69366 ), #17802, .T. ) ; +#44899 = ORIENTED_EDGE ( 'NONE', *, *, #72998, .T. ) ; +#44900 = LINE ( 'NONE', #47916, #59565 ) ; +#44901 = AXIS2_PLACEMENT_3D ( 'NONE', #22841, #66378, #29151 ) ; +#44902 = EDGE_LOOP ( 'NONE', ( #33156, #72075, #70859, #16285, #29383 ) ) ; +#44903 = ORIENTED_EDGE ( 'NONE', *, *, #68465, .F. ) ; +#44904 = ORIENTED_EDGE ( 'NONE', *, *, #52098, .F. ) ; +#44905 = ORIENTED_EDGE ( 'NONE', *, *, #60973, .F. ) ; +#44906 = FACE_OUTER_BOUND ( 'NONE', #25208, .T. ) ; +#44907 = CARTESIAN_POINT ( 'NONE', ( 11.03592035693673700, 31.09789380924897600, -28.25343951603329600 ) ) ; +#44908 = EDGE_LOOP ( 'NONE', ( #10996, #16989, #42780, #61982, #70060 ) ) ; +#44909 = CIRCLE ( 'NONE', #9665, 10.00000000000009600 ) ; +#44910 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 58.62623792124938400, -28.70555803802997700 ) ) ; +#44911 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49768, #6283, #37529, #285 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002317346715348256700, 0.0006984166105118168700 ), + .UNSPECIFIED. ) ; +#44912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44914 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, -0.6666666666666625200, -10.73183747965883100 ) ) ; +#44915 = ORIENTED_EDGE ( 'NONE', *, *, #17236, .T. ) ; +#44916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44917 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515426100, 61.01872124563919200, -28.53757464917570300 ) ) ; +#44918 = EDGE_CURVE ( 'NONE', #44696, #59532, #59245, .T. ) ; +#44919 = CIRCLE ( 'NONE', #60224, 10.00000000000009200 ) ; +#44920 = ORIENTED_EDGE ( 'NONE', *, *, #79820, .F. ) ; +#44921 = VERTEX_POINT ( 'NONE', #80556 ) ; +#44922 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#44923 = EDGE_CURVE ( 'NONE', #55080, #77608, #44722, .T. ) ; +#44924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44925 = PLANE ( 'NONE', #31231 ) ; +#44926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44927 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44928 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 46.72261628933269900, -28.70555803802996700 ) ) ; +#44929 = EDGE_CURVE ( 'NONE', #11868, #62677, #30352, .T. ) ; +#44930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44931 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44932 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44933 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995000, 49.13176086632792300, -28.70555803802996700 ) ) ; +#44934 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#44935 = EDGE_CURVE ( 'NONE', #67715, #45282, #52812, .T. ) ; +#44936 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 33.83333333333333600, 0.1341879241256075400 ) ) ; +#44937 = EDGE_CURVE ( 'NONE', #77464, #43133, #34346, .T. ) ; +#44938 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999979400, 60.79999999999982700, -28.20555803803014100 ) ) ; +#44939 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#44940 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#44941 = ORIENTED_EDGE ( 'NONE', *, *, #39114, .T. ) ; +#44942 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498192100, 38.99827085154639400, -28.24094723680242700 ) ) ; +#44943 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819626700, 81.65075715145296400, -28.20555803803005900 ) ) ; +#44944 = ORIENTED_EDGE ( 'NONE', *, *, #46276, .T. ) ; +#44945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44947 = CARTESIAN_POINT ( 'NONE', ( -3.959729345560824200, 18.22438272935921300, -28.30310183417005400 ) ) ; +#44948 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999999700, -28.20555803802997700 ) ) ; +#44949 = AXIS2_PLACEMENT_3D ( 'NONE', #29499, #72985, #35715 ) ; +#44950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#44951 = EDGE_CURVE ( 'NONE', #60591, #42864, #15860, .T. ) ; +#44952 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44953 = EDGE_CURVE ( 'NONE', #21775, #61295, #1384, .T. ) ; +#44954 = CARTESIAN_POINT ( 'NONE', ( 17.24297557446588100, 90.16517473503343200, -28.29551658696740500 ) ) ; +#44955 = EDGE_CURVE ( 'NONE', #54328, #1145, #67725, .T. ) ; +#44956 = ORIENTED_EDGE ( 'NONE', *, *, #71701, .T. ) ; +#44957 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#44958 = CARTESIAN_POINT ( 'NONE', ( 5.887396078741618600E-015, 32.70037755566822600, -28.53664883431610700 ) ) ; +#44959 = CIRCLE ( 'NONE', #2203, 10.00000000000009200 ) ; +#44960 = CARTESIAN_POINT ( 'NONE', ( -10.36059854261446300, 28.66749699759768400, -28.25434854811488300 ) ) ; +#44961 = ORIENTED_EDGE ( 'NONE', *, *, #33876, .F. ) ; +#44962 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#44963 = CONICAL_SURFACE ( 'NONE', #75887, 10.00000000000009400, 0.7853981633974447300 ) ; +#44964 = ORIENTED_EDGE ( 'NONE', *, *, #58658, .T. ) ; +#44965 = AXIS2_PLACEMENT_3D ( 'NONE', #70827, #33575, #77091 ) ; +#44966 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44967 = ORIENTED_EDGE ( 'NONE', *, *, #9867, .T. ) ; +#44968 = FACE_OUTER_BOUND ( 'NONE', #71893, .T. ) ; +#44969 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14872, #52093, #77148, #39891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764793994307600E-007, 0.0009376791149930056400 ), + .UNSPECIFIED. ) ; +#44970 = ORIENTED_EDGE ( 'NONE', *, *, #80447, .F. ) ; +#44971 = ORIENTED_EDGE ( 'NONE', *, *, #179, .T. ) ; +#44972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#44973 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44974 = AXIS2_PLACEMENT_3D ( 'NONE', #42434, #79724, #23716 ) ; +#44975 = ORIENTED_EDGE ( 'NONE', *, *, #48643, .F. ) ; +#44976 = VERTEX_POINT ( 'NONE', #44047 ) ; +#44977 = AXIS2_PLACEMENT_3D ( 'NONE', #45259, #51518, #26572 ) ; +#44978 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#44979 = AXIS2_PLACEMENT_3D ( 'NONE', #13610, #7292, #19843 ) ; +#44980 = VECTOR ( 'NONE', #48827, 1000.000000000000000 ) ; +#44981 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#44982 = VERTEX_POINT ( 'NONE', #6825 ) ; +#44983 = CIRCLE ( 'NONE', #4012, 10.50000000000009800 ) ; +#44984 = VERTEX_POINT ( 'NONE', #50309 ) ; +#44985 = ORIENTED_EDGE ( 'NONE', *, *, #47752, .F. ) ; +#44986 = VERTEX_POINT ( 'NONE', #552 ) ; +#44987 = ORIENTED_EDGE ( 'NONE', *, *, #23700, .T. ) ; +#44988 = CARTESIAN_POINT ( 'NONE', ( -17.38231690878858500, 28.39503779644464000, -28.41840204704135400 ) ) ; +#44989 = CONICAL_SURFACE ( 'NONE', #21024, 10.50000000000009600, 0.7853981633974500600 ) ; +#44990 = ORIENTED_EDGE ( 'NONE', *, *, #20960, .T. ) ; +#44991 = ADVANCED_FACE ( 'NONE', ( #5147 ), #32381, .T. ) ; +#44992 = CIRCLE ( 'NONE', #70055, 10.50000000000006400 ) ; +#44993 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 5.333333333333341900, -3.705558038030004400 ) ) ; +#44994 = AXIS2_PLACEMENT_3D ( 'NONE', #73783, #61290, #48712 ) ; +#44995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#44996 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25385, #62629, #37850, #586 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287100512100E-007, 0.0007057040544504642400 ), + .UNSPECIFIED. ) ; +#44997 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283200, 41.24660241562181500, -28.20555803802996700 ) ) ; +#44998 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#44999 = ORIENTED_EDGE ( 'NONE', *, *, #57612, .T. ) ; +#45000 = CONICAL_SURFACE ( 'NONE', #35672, 10.50000000000009900, 0.7853981633974518300 ) ; +#45001 = ORIENTED_EDGE ( 'NONE', *, *, #13194, .T. ) ; +#45002 = EDGE_CURVE ( 'NONE', #77798, #13368, #53253, .T. ) ; +#45003 = CIRCLE ( 'NONE', #61866, 10.00000000000009200 ) ; +#45004 = AXIS2_PLACEMENT_3D ( 'NONE', #10620, #35644, #79169 ) ; +#45005 = DIRECTION ( 'NONE', ( 1.776356839400250500E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45007 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000900, 19.34772751981642700, -28.70555803802998100 ) ) ; +#45008 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45009 = ADVANCED_FACE ( 'NONE', ( #18804 ), #62876, .T. ) ; +#45010 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17915, #55162, #80196, #42919 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354340730200E-007, 0.0004318366892330714400 ), + .UNSPECIFIED. ) ; +#45011 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45012 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45013 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000060800, 19.90050506338819500, -28.70555803802995200 ) ) ; +#45014 = AXIS2_PLACEMENT_3D ( 'NONE', #30357, #73862, #36565 ) ; +#45015 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45016 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747186900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#45017 = CARTESIAN_POINT ( 'NONE', ( -16.75304570016564700, 6.491641946448591900, -28.08849678415787900 ) ) ; +#45018 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610911800, 81.10236277681499900, -28.32100408376066600 ) ) ; +#45019 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#45020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45022 = ORIENTED_EDGE ( 'NONE', *, *, #76326, .T. ) ; +#45021 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743294300, 12.16464174796073600, -28.53896444442196400 ) ) ; +#45023 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 71.68929190448859900, -28.20555803803030800 ) ) ; +#45024 = AXIS2_PLACEMENT_3D ( 'NONE', #72950, #11206, #60708 ) ; +#45025 = VERTEX_POINT ( 'NONE', #31865 ) ; +#45026 = CARTESIAN_POINT ( 'NONE', ( 15.82622038785827800, 65.79999999999982700, -28.34928911331545000 ) ) ; +#45027 = FACE_OUTER_BOUND ( 'NONE', #39232, .T. ) ; +#45028 = EDGE_LOOP ( 'NONE', ( #69372, #30059, #28048, #48568, #58024 ) ) ; +#45029 = CONICAL_SURFACE ( 'NONE', #59709, 10.50000000000009600, 0.7853981633974518300 ) ; +#45030 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#45032 = EDGE_CURVE ( 'NONE', #69902, #1022, #38754, .T. ) ; +#45031 = ORIENTED_EDGE ( 'NONE', *, *, #28734, .F. ) ; +#45033 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 11.16666666666667500, -9.205558038030003900 ) ) ; +#45034 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855216800, 83.67681279774477300, -28.70555803802997700 ) ) ; +#45035 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056691400, 14.04999999999997900, -28.70555803802992800 ) ) ; +#45036 = FACE_OUTER_BOUND ( 'NONE', #55920, .T. ) ; +#45037 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12568, #37539, #56324, #19068 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736053062600E-007, 0.0002745102201814314600 ), + .UNSPECIFIED. ) ; +#45038 = ORIENTED_EDGE ( 'NONE', *, *, #2654, .F. ) ; +#45039 = ORIENTED_EDGE ( 'NONE', *, *, #12475, .F. ) ; +#45040 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671994600, 81.93585231025889500, -28.38420446581274700 ) ) ; +#45041 = PLANE ( 'NONE', #37117 ) ; +#45042 = CIRCLE ( 'NONE', #64490, 10.50000000000022600 ) ; +#45043 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 70.69966441803892100, -28.70555803802997700 ) ) ; +#45044 = CIRCLE ( 'NONE', #57632, 10.00000000000009200 ) ; +#45045 = ORIENTED_EDGE ( 'NONE', *, *, #245, .T. ) ; +#45046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45047 = EDGE_CURVE ( 'NONE', #9377, #65030, #24339, .T. ) ; +#45048 = CONICAL_SURFACE ( 'NONE', #60280, 10.00000000000009200, 0.7853981633974447300 ) ; +#45049 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45050 = EDGE_CURVE ( 'NONE', #69868, #56812, #1227, .T. ) ; +#45051 = ORIENTED_EDGE ( 'NONE', *, *, #4609, .F. ) ; +#45052 = ORIENTED_EDGE ( 'NONE', *, *, #74892, .T. ) ; +#45053 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 68.16545993132805800, -28.70555803803024400 ) ) ; +#45054 = VERTEX_POINT ( 'NONE', #56868 ) ; +#45055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45056 = EDGE_LOOP ( 'NONE', ( #77309, #6021, #42935, #47480 ) ) ; +#45057 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#45058 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 90.51916201875667400, -28.45106778992437700 ) ) ; +#45059 = CIRCLE ( 'NONE', #49657, 10.00000000000009200 ) ; +#45060 = AXIS2_PLACEMENT_3D ( 'NONE', #15064, #39810, #21339 ) ; +#45061 = ORIENTED_EDGE ( 'NONE', *, *, #12503, .F. ) ; +#45062 = EDGE_CURVE ( 'NONE', #4381, #23348, #48900, .T. ) ; +#45063 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280407100, 22.65857157145701000, -28.37229765499279600 ) ) ; +#45064 = EDGE_CURVE ( 'NONE', #46776, #35530, #9874, .T. ) ; +#45065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45066 = EDGE_CURVE ( 'NONE', #35221, #74485, #65513, .T. ) ; +#45067 = ADVANCED_FACE ( 'NONE', ( #15837 ), #13899, .T. ) ; +#45068 = VERTEX_POINT ( 'NONE', #51366 ) ; +#45069 = EDGE_CURVE ( 'NONE', #6456, #42984, #76186, .T. ) ; +#45070 = AXIS2_PLACEMENT_3D ( 'NONE', #56793, #19544, #63066 ) ; +#45071 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530700, 45.55000000000000400, -28.20555803802996700 ) ) ; +#45072 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818077900, 79.94924284854685900, -28.20555803802997700 ) ) ; +#45073 = ORIENTED_EDGE ( 'NONE', *, *, #47415, .F. ) ; +#45074 = CIRCLE ( 'NONE', #1273, 9.500000000000097700 ) ; +#45075 = ADVANCED_FACE ( 'NONE', ( #80077 ), #61599, .T. ) ; +#45076 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 54.83333333333334300, -2.545304000185615800 ) ) ; +#45077 = AXIS2_PLACEMENT_3D ( 'NONE', #8858, #52108, #21428 ) ; +#45078 = AXIS2_PLACEMENT_3D ( 'NONE', #63011, #13246, #6958 ) ; +#45079 = CARTESIAN_POINT ( 'NONE', ( -10.22115791441228400, 41.43523632220588100, -28.30315276798567200 ) ) ; +#45080 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963500, 39.15930907398619400, -28.35186440610857500 ) ) ; +#45081 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15264, #58774, #34025, #77540 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648281868022800E-007, 0.0004318378175225202900 ), + .UNSPECIFIED. ) ; +#45082 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45083 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 19.83333333333334300, -3.349151577478984600 ) ) ; +#45084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45085 = CIRCLE ( 'NONE', #40918, 10.00000000000009400 ) ; +#45086 = CARTESIAN_POINT ( 'NONE', ( 3.729655473350135300E-014, 82.97376207875062400, -28.70555803802997700 ) ) ; +#45087 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 80.34267608797603100, -28.20555803802997700 ) ) ; +#45088 = ADVANCED_FACE ( 'NONE', ( #3177 ), #45385, .T. ) ; +#45089 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 57.16666666666667100, -4.152999154772358800 ) ) ; +#45090 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544026900, 80.07527064970102500, -28.39317435246130800 ) ) ; +#45091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45092 = VERTEX_POINT ( 'NONE', #20690 ) ; +#45093 = AXIS2_PLACEMENT_3D ( 'NONE', #28887, #60125, #35382 ) ; +#45094 = EDGE_CURVE ( 'NONE', #19205, #42340, #61759, .T. ) ; +#45095 = ORIENTED_EDGE ( 'NONE', *, *, #7903, .T. ) ; +#45096 = CARTESIAN_POINT ( 'NONE', ( 16.59501820436462800, 9.202502049225310900, -28.57758159557670700 ) ) ; +#45097 = ORIENTED_EDGE ( 'NONE', *, *, #60193, .T. ) ; +#45098 = CARTESIAN_POINT ( 'NONE', ( 4.254659323422466500E-015, 44.13556610137280200, -28.54207364681942500 ) ) ; +#45099 = ADVANCED_FACE ( 'NONE', ( #63558 ), #11952, .F. ) ; +#45100 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 83.65857157145681800, -28.20555803803047800 ) ) ; +#45101 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#45102 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45103 = FACE_OUTER_BOUND ( 'NONE', #73920, .T. ) ; +#45104 = EDGE_LOOP ( 'NONE', ( #52245, #55018, #71514 ) ) ; +#45105 = CONICAL_SURFACE ( 'NONE', #60191, 10.50000000000009600, 0.7853981633974518300 ) ; +#45106 = ORIENTED_EDGE ( 'NONE', *, *, #45050, .F. ) ; +#45107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45108 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.59999999999999400, 16.29444196196997700 ) ) ; +#45109 = EDGE_CURVE ( 'NONE', #79993, #7602, #47235, .T. ) ; +#45110 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761000, 51.43945992495534400, -28.34042301926881900 ) ) ; +#45111 = ORIENTED_EDGE ( 'NONE', *, *, #61828, .F. ) ; +#45112 = CIRCLE ( 'NONE', #38590, 10.50000000000009600 ) ; +#45113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45114 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#45115 = AXIS2_PLACEMENT_3D ( 'NONE', #71822, #78071, #28342 ) ; +#45116 = FACE_OUTER_BOUND ( 'NONE', #42374, .T. ) ; +#45117 = AXIS2_PLACEMENT_3D ( 'NONE', #65609, #28383, #71866 ) ; +#45118 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345596500, 61.52472935029898300, -28.39317435246130800 ) ) ; +#45119 = VERTEX_POINT ( 'NONE', #70706 ) ; +#45120 = ORIENTED_EDGE ( 'NONE', *, *, #37946, .T. ) ; +#45121 = ORIENTED_EDGE ( 'NONE', *, *, #26143, .F. ) ; +#45122 = CARTESIAN_POINT ( 'NONE', ( 9.785741443456087700, 60.07527064970091900, -28.39317435246117700 ) ) ; +#45123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45124 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999953500, 61.43250300240195800, -28.20555803803014400 ) ) ; +#45125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45126 = CIRCLE ( 'NONE', #66478, 10.00000000000009200 ) ; +#45127 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#45129 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#45130 = EDGE_LOOP ( 'NONE', ( #20808, #48420, #77102, #12029 ) ) ; +#45131 = AXIS2_PLACEMENT_3D ( 'NONE', #22222, #78258, #40995 ) ; +#45132 = CIRCLE ( 'NONE', #13335, 10.00000000000009400 ) ; +#45133 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 60.66666666666667100, 5.722645192245505700 ) ) ; +#45134 = EDGE_LOOP ( 'NONE', ( #46619, #57380, #70532 ) ) ; +#45135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45136 = ORIENTED_EDGE ( 'NONE', *, *, #51897, .T. ) ; +#45137 = ORIENTED_EDGE ( 'NONE', *, *, #60973, .T. ) ; +#45138 = ORIENTED_EDGE ( 'NONE', *, *, #42581, .F. ) ; +#45139 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48377, #17408, #67178, #29958 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101751826000, 0.0007596411030283035800 ), + .UNSPECIFIED. ) ; +#45140 = ORIENTED_EDGE ( 'NONE', *, *, #34153, .F. ) ; +#45141 = FACE_OUTER_BOUND ( 'NONE', #47183, .T. ) ; +#45142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45143 = CARTESIAN_POINT ( 'NONE', ( -4.957239735864543900, 55.79999999999999000, -28.53819074160684000 ) ) ; +#45144 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.22294471194862100, -28.20555803802997700 ) ) ; +#45145 = AXIS2_PLACEMENT_3D ( 'NONE', #54011, #16761, #60305 ) ; +#45146 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#45147 = ORIENTED_EDGE ( 'NONE', *, *, #55578, .T. ) ; +#45148 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941500, 90.13716795162659400, -28.48697406221667800 ) ) ; +#45149 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807153100, 66.79999999999998300, -28.70555803802997700 ) ) ; +#45150 = ORIENTED_EDGE ( 'NONE', *, *, #51635, .T. ) ; +#45151 = ORIENTED_EDGE ( 'NONE', *, *, #67282, .T. ) ; +#45152 = EDGE_CURVE ( 'NONE', #46273, #26524, #44983, .T. ) ; +#45153 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 71.43945992495532900, -28.34042301926881200 ) ) ; +#45154 = ORIENTED_EDGE ( 'NONE', *, *, #31213, .F. ) ; +#45155 = EDGE_LOOP ( 'NONE', ( #6255, #30670, #33214, #62843 ) ) ; +#45156 = CIRCLE ( 'NONE', #53351, 9.500000000000097700 ) ; +#45157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45159 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 25.83333333333332900, -9.205558038030003900 ) ) ; +#45160 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#45161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45162 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 41.44069092601378700, -28.35186440610859300 ) ) ; +#45163 = ADVANCED_FACE ( 'NONE', ( #28539 ), #43057, .T. ) ; +#45164 = EDGE_CURVE ( 'NONE', #76201, #71041, #59643, .T. ) ; +#45165 = CONICAL_SURFACE ( 'NONE', #15271, 10.50000000000009600, 0.7853981633974500600 ) ; +#45166 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 60.16054007504464400, -28.34042301926881200 ) ) ; +#45167 = EDGE_CURVE ( 'NONE', #38738, #77552, #32795, .T. ) ; +#45168 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 80.13716795162659400, -28.48697406221667400 ) ) ; +#45169 = ORIENTED_EDGE ( 'NONE', *, *, #13551, .T. ) ; +#45170 = ADVANCED_FACE ( 'NONE', ( #46950 ), #26561, .T. ) ; +#45171 = EDGE_CURVE ( 'NONE', #6616, #26548, #18351, .T. ) ; +#45172 = ORIENTED_EDGE ( 'NONE', *, *, #56642, .T. ) ; +#45173 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#45174 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7042, #31835, #19574, #63099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.553824967135427400E-018, 0.001246264537621152400 ), + .UNSPECIFIED. ) ; +#45175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45176 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45177 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, -2.833333333333328600, 9.794441961969994300 ) ) ; +#45178 = EDGE_CURVE ( 'NONE', #60797, #62498, #3867, .T. ) ; +#45179 = FACE_OUTER_BOUND ( 'NONE', #46624, .T. ) ; +#45180 = AXIS2_PLACEMENT_3D ( 'NONE', #41418, #41676, #29245 ) ; +#45181 = CIRCLE ( 'NONE', #704, 10.00000000000009600 ) ; +#45182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45183 = VERTEX_POINT ( 'NONE', #52743 ) ; +#45184 = ADVANCED_FACE ( 'NONE', ( #30464 ), #41126, .F. ) ; +#45185 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61495, #67727, #73998, #36704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690709678500E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#45186 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45187 = EDGE_LOOP ( 'NONE', ( #7127, #15359, #74471, #12977 ) ) ; +#45188 = FACE_OUTER_BOUND ( 'NONE', #5841, .T. ) ; +#45189 = FACE_OUTER_BOUND ( 'NONE', #28110, .T. ) ; +#45190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45191 = ORIENTED_EDGE ( 'NONE', *, *, #23532, .T. ) ; +#45192 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713895700, 53.67681279774509300, -28.70555803803030800 ) ) ; +#45193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45194 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76540, #33037, #45501, #8254 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565741134155400E-007, 0.0002592140922089717600 ), + .UNSPECIFIED. ) ; +#45195 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 101.5999999999999900, -18.70555803802997700 ) ) ; +#45196 = ORIENTED_EDGE ( 'NONE', *, *, #24168, .T. ) ; +#45197 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#45198 = AXIS2_PLACEMENT_3D ( 'NONE', #23564, #73339, #79592 ) ; +#45199 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#45200 = EDGE_CURVE ( 'NONE', #43655, #47573, #70189, .T. ) ; +#45201 = EDGE_CURVE ( 'NONE', #26910, #63031, #55731, .T. ) ; +#45202 = ADVANCED_FACE ( 'NONE', ( #9991 ), #8012, .T. ) ; +#45203 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#45204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75625, #50843, #57144, #19889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736524795400E-007, 0.0002745102201814314600 ), + .UNSPECIFIED. ) ; +#45207 = CIRCLE ( 'NONE', #44491, 10.50000000000009600 ) ; +#45206 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655937800, 17.92298334620740300, -28.20555803802993500 ) ) ; +#45205 = AXIS2_PLACEMENT_3D ( 'NONE', #21844, #9308, #59096 ) ; +#45208 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45209 = ORIENTED_EDGE ( 'NONE', *, *, #11984, .F. ) ; +#45211 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 31.66666666666667500, -3.705558038030004400 ) ) ; +#45210 = CONICAL_SURFACE ( 'NONE', #69543, 10.00000000000009200, 0.7853981633974447300 ) ; +#45212 = EDGE_LOOP ( 'NONE', ( #51702, #24466, #60182, #51900 ) ) ; +#45213 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45214 = ORIENTED_EDGE ( 'NONE', *, *, #60942, .T. ) ; +#45215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45216 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#45217 = EDGE_LOOP ( 'NONE', ( #77814, #69722, #16619, #41691 ) ) ; +#45218 = ORIENTED_EDGE ( 'NONE', *, *, #10185, .T. ) ; +#45219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45220 = EDGE_CURVE ( 'NONE', #36273, #5295, #76155, .T. ) ; +#45221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45222 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45223 = ADVANCED_FACE ( 'NONE', ( #78121 ), #28327, .T. ) ; +#45224 = CIRCLE ( 'NONE', #13161, 9.500000000000097700 ) ; +#45225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45226 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349243400, 40.89456479767209600, -28.70555803802996700 ) ) ; +#45227 = AXIS2_PLACEMENT_3D ( 'NONE', #8431, #51930, #14709 ) ; +#45229 = EDGE_LOOP ( 'NONE', ( #60207, #44899, #54032, #17482, #26342, #27633, #22448, #3863 ) ) ; +#45228 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#45230 = AXIS2_PLACEMENT_3D ( 'NONE', #43608, #6373, #49855 ) ; +#45231 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655543400, 41.67701665379215800, -28.20555803802997400 ) ) ; +#45232 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45234 = CARTESIAN_POINT ( 'NONE', ( 16.44668611327855200, 61.48387403443023700, -28.57421789838282700 ) ) ; +#45235 = EDGE_LOOP ( 'NONE', ( #20200, #35145, #11074 ) ) ; +#45236 = ORIENTED_EDGE ( 'NONE', *, *, #70538, .T. ) ; +#45237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45239 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985164500, 34.09761904761935400, -28.70555803802995200 ) ) ; +#45240 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45241 = EDGE_LOOP ( 'NONE', ( #49734, #26378, #6320 ) ) ; +#45242 = CONICAL_SURFACE ( 'NONE', #62187, 10.00000000000009200, 0.7853981633974447300 ) ; +#45243 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754300, 21.59027028261003500, -28.70555803802994500 ) ) ; +#45244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45245 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074376800, 42.28032162676582600, -28.55467576046957800 ) ) ; +#45246 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898058600, 90.38105266879259100, -28.33409528117009700 ) ) ; +#45247 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#45248 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 49.42298334620782900, -28.20555803802996700 ) ) ; +#45249 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34807, #28575, #47259, #10034 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537445983003100E-007, 0.0002745498510224178100 ), + .UNSPECIFIED. ) ; +#45250 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45251 = AXIS2_PLACEMENT_3D ( 'NONE', #12016, #55519, #18269 ) ; +#45252 = FACE_OUTER_BOUND ( 'NONE', #4513, .T. ) ; +#45253 = VERTEX_POINT ( 'NONE', #40774 ) ; +#45254 = EDGE_LOOP ( 'NONE', ( #54536, #45702, #61221 ) ) ; +#45255 = FACE_OUTER_BOUND ( 'NONE', #70293, .T. ) ; +#45256 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 3.166666666666668700, 0.1341879241256129200 ) ) ; +#45257 = AXIS2_PLACEMENT_3D ( 'NONE', #44147, #31708, #37923 ) ; +#45258 = ORIENTED_EDGE ( 'NONE', *, *, #66926, .F. ) ; +#45259 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#45260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45261 = CARTESIAN_POINT ( 'NONE', ( 3.464812346017064100, 9.406791769321971600, -28.68794773163824600 ) ) ; +#45262 = EDGE_CURVE ( 'NONE', #60644, #37756, #41275, .T. ) ; +#45263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45264 = CONICAL_SURFACE ( 'NONE', #30727, 10.00000000000009200, 0.7853981633974447300 ) ; +#45265 = LINE ( 'NONE', #48930, #61882 ) ; +#45266 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #1120, #44605 ) ; +#45267 = ORIENTED_EDGE ( 'NONE', *, *, #5583, .F. ) ; +#45268 = CARTESIAN_POINT ( 'NONE', ( 9.553492182969053600, 89.37488905615671800, -28.55192314908697400 ) ) ; +#45269 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 71.25732391202370800, -28.20555803803030800 ) ) ; +#45270 = FACE_OUTER_BOUND ( 'NONE', #48948, .T. ) ; +#45271 = ORIENTED_EDGE ( 'NONE', *, *, #75708, .T. ) ; +#45272 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#45273 = EDGE_LOOP ( 'NONE', ( #19841, #79538, #26697 ) ) ; +#45274 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#45275 = CARTESIAN_POINT ( 'NONE', ( 17.90233405034981800, 71.36492161058528400, -28.27580420063998500 ) ) ; +#45276 = CIRCLE ( 'NONE', #11313, 9.500000000000097700 ) ; +#45277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45278 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922524800, 81.50962196508452000, -28.29483400905927900 ) ) ; +#45279 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844490800, 75.79999999999982700, -28.20555803803014400 ) ) ; +#45280 = CARTESIAN_POINT ( 'NONE', ( -15.85864231129047900, 24.54999999999999700, -28.50266868976635900 ) ) ; +#45281 = CIRCLE ( 'NONE', #20024, 10.00000000000009400 ) ; +#45282 = VERTEX_POINT ( 'NONE', #3774 ) ; +#45283 = EDGE_CURVE ( 'NONE', #43041, #53959, #57662, .T. ) ; +#45284 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45285 = ORIENTED_EDGE ( 'NONE', *, *, #46974, .F. ) ; +#45286 = ADVANCED_FACE ( 'NONE', ( #74254 ), #6086, .F. ) ; +#45287 = ORIENTED_EDGE ( 'NONE', *, *, #49123, .F. ) ; +#45288 = EDGE_CURVE ( 'NONE', #29509, #16872, #26830, .T. ) ; +#45289 = ORIENTED_EDGE ( 'NONE', *, *, #5101, .F. ) ; +#45290 = ORIENTED_EDGE ( 'NONE', *, *, #37679, .F. ) ; +#45291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45292 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042478600, 11.09027028261003000, -28.70555803802993500 ) ) ; +#45293 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45295 = ADVANCED_FACE ( 'NONE', ( #22639 ), #53771, .T. ) ; +#45294 = ORIENTED_EDGE ( 'NONE', *, *, #51149, .F. ) ; +#45296 = FACE_OUTER_BOUND ( 'NONE', #7768, .T. ) ; +#45297 = ORIENTED_EDGE ( 'NONE', *, *, #21179, .F. ) ; +#45298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#45299 = EDGE_CURVE ( 'NONE', #79988, #76259, #12378, .T. ) ; +#45300 = ADVANCED_FACE ( 'NONE', ( #72300 ), #35364, .T. ) ; +#45301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45302 = EDGE_CURVE ( 'NONE', #16784, #28139, #67439, .T. ) ; +#45304 = ORIENTED_EDGE ( 'NONE', *, *, #56307, .F. ) ; +#45303 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75463, #31953, #56975, #19710 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621189900 ), + .UNSPECIFIED. ) ; +#45305 = CIRCLE ( 'NONE', #6533, 10.00000000000009400 ) ; +#45306 = AXIS2_PLACEMENT_3D ( 'NONE', #63303, #26041, #69524 ) ; +#45307 = VERTEX_POINT ( 'NONE', #47812 ) ; +#45308 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45309 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 9.000000000000007100, 6.794441961969995200 ) ) ; +#45310 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#45311 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844488600, 85.46616414991842700, -28.37247596307075900 ) ) ; +#45312 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944361400, 20.79955846777004400, -28.38339015421974300 ) ) ; +#45313 = EDGE_LOOP ( 'NONE', ( #4771, #72587, #37821, #46856, #52877 ) ) ; +#45314 = CONICAL_SURFACE ( 'NONE', #54312, 10.00000000000009600, 0.7853981633974447300 ) ; +#45315 = CARTESIAN_POINT ( 'NONE', ( 15.05232299489569100, 65.84127283767759300, -28.70545439276234100 ) ) ; +#45316 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 70.16054007504466500, -28.34042301926880800 ) ) ; +#45317 = CARTESIAN_POINT ( 'NONE', ( -4.214258556543948800, 61.52472935029903300, -28.39317435246121900 ) ) ; +#45318 = AXIS2_PLACEMENT_3D ( 'NONE', #40691, #3432, #46934 ) ; +#45319 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70942, #14927, #39940, #2652 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867039556000E-007, 0.001076778502991534900 ), + .UNSPECIFIED. ) ; +#45320 = EDGE_CURVE ( 'NONE', #38547, #64791, #78705, .T. ) ; +#45322 = EDGE_LOOP ( 'NONE', ( #21409, #32759, #4876 ) ) ; +#45321 = EDGE_CURVE ( 'NONE', #77240, #45464, #64253, .T. ) ; +#45323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45324 = EDGE_CURVE ( 'NONE', #21332, #68194, #49712, .T. ) ; +#45325 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344754100, 10.17701665379211600, -28.20555803803009800 ) ) ; +#45326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45328 = CIRCLE ( 'NONE', #32884, 9.500000000000099500 ) ; +#45329 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58050, #45491, #27067, #70556 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921175730400E-007, 0.0004084731003434142600 ), + .UNSPECIFIED. ) ; +#45330 = CIRCLE ( 'NONE', #18088, 10.50000000000009600 ) ; +#45331 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#45332 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#45333 = ORIENTED_EDGE ( 'NONE', *, *, #37636, .T. ) ; +#45334 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467681300, 40.76893971292317100, -28.57333386111099200 ) ) ; +#45335 = EDGE_CURVE ( 'NONE', #35236, #67308, #70304, .T. ) ; +#45336 = ORIENTED_EDGE ( 'NONE', *, *, #33684, .T. ) ; +#45337 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 71.99560977511615100, -28.70555803803030800 ) ) ; +#45338 = CIRCLE ( 'NONE', #67126, 10.00000000000009200 ) ; +#45339 = AXIS2_PLACEMENT_3D ( 'NONE', #6535, #12814, #261 ) ; +#45340 = AXIS2_PLACEMENT_3D ( 'NONE', #27501, #33737, #64770 ) ; +#45341 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 77.46443389862686500, -28.54207364681969100 ) ) ; +#45343 = ORIENTED_EDGE ( 'NONE', *, *, #24735, .F. ) ; +#45342 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 5.000000000000000000, -18.70555803803001300 ) ) ; +#45344 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57944, #1896, #39153, #20696 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207932961300E-007, 0.0008724366121409710300 ), + .UNSPECIFIED. ) ; +#45345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45346 = CIRCLE ( 'NONE', #14510, 10.50000000000009600 ) ; +#45347 = FACE_OUTER_BOUND ( 'NONE', #58387, .T. ) ; +#45348 = ORIENTED_EDGE ( 'NONE', *, *, #61641, .T. ) ; +#45349 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45350 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#45351 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#45352 = ORIENTED_EDGE ( 'NONE', *, *, #28606, .T. ) ; +#45353 = VERTEX_POINT ( 'NONE', #42097 ) ; +#45354 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 52.66666666666668600, 1.294441961969997200 ) ) ; +#45355 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#45356 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#45357 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45358 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 17.66666666666667900, 2.794441961969992100 ) ) ; +#45359 = FACE_OUTER_BOUND ( 'NONE', #1204, .T. ) ; +#45360 = AXIS2_PLACEMENT_3D ( 'NONE', #8751, #52263, #15036 ) ; +#45361 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45362 = ORIENTED_EDGE ( 'NONE', *, *, #60239, .F. ) ; +#45363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45364 = ORIENTED_EDGE ( 'NONE', *, *, #42224, .T. ) ; +#45365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45366 = EDGE_LOOP ( 'NONE', ( #52784, #80784, #57954 ) ) ; +#45367 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 55.00000000000000000, -1.205558038030002800 ) ) ; +#45368 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#45369 = VERTEX_POINT ( 'NONE', #10861 ) ; +#45370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45371 = CONICAL_SURFACE ( 'NONE', #54195, 10.50000000000009600, 0.7853981633974518300 ) ; +#45372 = AXIS2_PLACEMENT_3D ( 'NONE', #24249, #67770, #30528 ) ; +#45373 = EDGE_LOOP ( 'NONE', ( #15698, #14383, #9012, #19452 ) ) ; +#45374 = VERTEX_POINT ( 'NONE', #60916 ) ; +#45375 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 29.75227248018355700, -28.70555803802998100 ) ) ; +#45376 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22472, #59747, #72259, #35000 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386343574400, 0.0008131256040089958600 ), + .UNSPECIFIED. ) ; +#45377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45379 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922505700, 51.50962196508494600, -28.29483400905893800 ) ) ; +#45380 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45382 = CIRCLE ( 'NONE', #71118, 10.00000000000009400 ) ; +#45383 = VERTEX_POINT ( 'NONE', #23644 ) ; +#45384 = AXIS2_PLACEMENT_3D ( 'NONE', #32233, #38455, #44685 ) ; +#45385 = PLANE ( 'NONE', #80626 ) ; +#45386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45387 = ORIENTED_EDGE ( 'NONE', *, *, #66148, .F. ) ; +#45388 = FACE_OUTER_BOUND ( 'NONE', #73417, .T. ) ; +#45389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45390 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265455200, 81.32559822014181300, -28.29986836858018900 ) ) ; +#45391 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999798400, 62.97376207875046800, -28.70555803803030800 ) ) ; +#45392 = CIRCLE ( 'NONE', #15770, 10.00000000000009200 ) ; +#45393 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280430800, 15.94142842854287600, -28.37229765499314700 ) ) ; +#45394 = ADVANCED_FACE ( 'NONE', ( #39144 ), #51780, .F. ) ; +#45395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45397 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#45398 = ORIENTED_EDGE ( 'NONE', *, *, #9458, .T. ) ; +#45399 = EDGE_CURVE ( 'NONE', #73953, #60076, #68364, .T. ) ; +#45400 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 58.49999999999999300, -7.061964498581022400 ) ) ; +#45401 = FACE_OUTER_BOUND ( 'NONE', #30000, .T. ) ; +#45402 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459451400, 82.51973550835676000, -28.70555803803004500 ) ) ; +#45403 = ORIENTED_EDGE ( 'NONE', *, *, #12303, .T. ) ; +#45404 = EDGE_CURVE ( 'NONE', #56481, #67444, #4128, .T. ) ; +#45405 = CONICAL_SURFACE ( 'NONE', #1861, 10.50000000000009600, 0.7853981633974500600 ) ; +#45406 = ORIENTED_EDGE ( 'NONE', *, *, #13203, .T. ) ; +#45407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45408 = EDGE_LOOP ( 'NONE', ( #9707, #60953, #26243 ) ) ; +#45409 = FACE_OUTER_BOUND ( 'NONE', #56028, .T. ) ; +#45410 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45412 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339004500, 70.13716795162646600, -28.48697406221666000 ) ) ; +#45413 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1097, #19618, #50845, #13650 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815783499500E-007, 0.0007763385940576963800 ), + .UNSPECIFIED. ) ; +#45414 = EDGE_CURVE ( 'NONE', #32815, #30197, #20688, .T. ) ; +#45415 = ORIENTED_EDGE ( 'NONE', *, *, #24166, .F. ) ; +#45416 = ADVANCED_FACE ( 'NONE', ( #55702 ), #49824, .T. ) ; +#45417 = EDGE_CURVE ( 'NONE', #5385, #16201, #35333, .T. ) ; +#45418 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922517200, 70.09037803491457900, -28.29483400905908400 ) ) ; +#45419 = CIRCLE ( 'NONE', #35957, 9.500000000000095900 ) ; +#45420 = ORIENTED_EDGE ( 'NONE', *, *, #61709, .F. ) ; +#45421 = EDGE_CURVE ( 'NONE', #66219, #75589, #35306, .T. ) ; +#45422 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41692, #60499, #79255, #41967 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367399496200, 0.0005556746457754060600 ), + .UNSPECIFIED. ) ; +#45423 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 23.66666666666667500, 5.722645192245505700 ) ) ; +#45424 = ORIENTED_EDGE ( 'NONE', *, *, #56286, .F. ) ; +#45425 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45426 = AXIS2_PLACEMENT_3D ( 'NONE', #33388, #76908, #39641 ) ; +#45427 = EDGE_CURVE ( 'NONE', #12163, #55704, #24589, .T. ) ; +#45428 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45429 = EDGE_CURVE ( 'NONE', #27440, #31675, #20842, .T. ) ; +#45430 = EDGE_CURVE ( 'NONE', #5570, #39861, #18731, .T. ) ; +#45431 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465696800, 60.65007990305426200, -28.43638873268705000 ) ) ; +#45432 = FACE_OUTER_BOUND ( 'NONE', #67903, .T. ) ; +#45433 = CIRCLE ( 'NONE', #22522, 10.00000000000009200 ) ; +#45434 = ORIENTED_EDGE ( 'NONE', *, *, #43093, .T. ) ; +#45435 = AXIS2_PLACEMENT_3D ( 'NONE', #74080, #53, #24835 ) ; +#45436 = ORIENTED_EDGE ( 'NONE', *, *, #70576, .F. ) ; +#45437 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45438 = EDGE_LOOP ( 'NONE', ( #66434, #22116, #16782, #11751 ) ) ; +#45439 = ORIENTED_EDGE ( 'NONE', *, *, #79709, .F. ) ; +#45440 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#45441 = AXIS2_PLACEMENT_3D ( 'NONE', #27111, #2047, #39597 ) ; +#45442 = AXIS2_PLACEMENT_3D ( 'NONE', #16615, #60146, #72655 ) ; +#45443 = ORIENTED_EDGE ( 'NONE', *, *, #24416, .T. ) ; +#45444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45445 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#45446 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609199400, 23.91466791010194700, -28.53910738522643000 ) ) ; +#45447 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 67.16666666666667100, -9.205558038030003900 ) ) ; +#45448 = CONICAL_SURFACE ( 'NONE', #67432, 10.00000000000009200, 0.7853981633974447300 ) ; +#45450 = ORIENTED_EDGE ( 'NONE', *, *, #63262, .F. ) ; +#45449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45451 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#45452 = ORIENTED_EDGE ( 'NONE', *, *, #41165, .F. ) ; +#45453 = ORIENTED_EDGE ( 'NONE', *, *, #27135, .F. ) ; +#45454 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45455 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 61.43945992495532900, -28.34042301926881200 ) ) ; +#45456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45457 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45458 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528172200, 49.63131911501876200, -28.51286550264510200 ) ) ; +#45459 = FACE_OUTER_BOUND ( 'NONE', #23254, .T. ) ; +#45460 = AXIS2_PLACEMENT_3D ( 'NONE', #46958, #9729, #53238 ) ; +#45461 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690295600, 65.79999999999950000, -28.70555803803030800 ) ) ; +#45462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45463 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567173200, 9.746602415621898900, -28.20555803802992800 ) ) ; +#45464 = VERTEX_POINT ( 'NONE', #3703 ) ; +#45465 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29745, #66979, #42185, #4944 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401332800, 0.004682530427069460400 ), + .UNSPECIFIED. ) ; +#45466 = ADVANCED_FACE ( 'NONE', ( #37200 ), #47889, .F. ) ; +#45467 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45468 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45469 = CARTESIAN_POINT ( 'NONE', ( -24.71750510785808400, 5.141247446071049300, -21.14446223635259200 ) ) ; +#45470 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466633200, 50.33106028708534300, -28.57333386111659500 ) ) ; +#45471 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 29.50000000000001800, 2.454695999814380200 ) ) ; +#45472 = CIRCLE ( 'NONE', #33863, 10.50000000000009600 ) ; +#45473 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511904600, 71.99560977511662000, -28.70555803802997700 ) ) ; +#45474 = VERTEX_POINT ( 'NONE', #41240 ) ; +#45475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45476 = EDGE_CURVE ( 'NONE', #66575, #22293, #6367, .T. ) ; +#45477 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#45478 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#45479 = AXIS2_PLACEMENT_3D ( 'NONE', #57536, #20272, #63809 ) ; +#45480 = EDGE_LOOP ( 'NONE', ( #25133, #66546, #27073 ) ) ; +#45481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45482 = ORIENTED_EDGE ( 'NONE', *, *, #54866, .T. ) ; +#45483 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 71.25732391202396300, -28.20555803802997700 ) ) ; +#45484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45485 = ADVANCED_FACE ( 'NONE', ( #224 ), #14825, .T. ) ; +#45486 = CIRCLE ( 'NONE', #19583, 9.500000000000099500 ) ; +#45487 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45488 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#45489 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.87705528805138800, -28.20555803802996700 ) ) ; +#45490 = PLANE ( 'NONE', #2033 ) ; +#45491 = CARTESIAN_POINT ( 'NONE', ( 10.37141821671397700, 70.16749699759738200, -28.25056166218041300 ) ) ; +#45492 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45493 = CARTESIAN_POINT ( 'NONE', ( 16.57123091997362600, 61.47225659168370300, -28.53062721603955200 ) ) ; +#45494 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 60.34267608797601700, -28.20555803802997700 ) ) ; +#45495 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056686000, 45.54999999999998300, -28.70555803802996700 ) ) ; +#45496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45497 = AXIS2_PLACEMENT_3D ( 'NONE', #77249, #39986, #2697 ) ; +#45498 = CIRCLE ( 'NONE', #78145, 9.500000000000095900 ) ; +#45499 = ORIENTED_EDGE ( 'NONE', *, *, #31058, .T. ) ; +#45500 = CARTESIAN_POINT ( 'NONE', ( 10.07349692871609300, 71.37839075872565800, -28.29547734244359000 ) ) ; +#45501 = CARTESIAN_POINT ( 'NONE', ( -17.07349692871594400, 61.37839075872577900, -28.29547734244345500 ) ) ; +#45502 = ADVANCED_FACE ( 'NONE', ( #2155 ), #62521, .F. ) ; +#45503 = CARTESIAN_POINT ( 'NONE', ( 3.031778038947873500, 80.28233213024641700, -28.25051428653851100 ) ) ; +#45504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38097, #843, #44320, #7100 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941253100, 0.001517194977238255500 ), + .UNSPECIFIED. ) ; +#45505 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 59.98922577050341000, -28.37255355648634800 ) ) ; +#45506 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#45507 = ORIENTED_EDGE ( 'NONE', *, *, #38300, .F. ) ; +#45508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45510 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67473, #23985, #30252, #73749 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082122505700E-007, 0.0007679735311067906300 ), + .UNSPECIFIED. ) ; +#45511 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310634900, 51.49769010897038900, -28.61774594594309900 ) ) ; +#45512 = ADVANCED_FACE ( 'NONE', ( #66428 ), #31389, .F. ) ; +#45513 = FACE_OUTER_BOUND ( 'NONE', #72866, .T. ) ; +#45514 = CIRCLE ( 'NONE', #62088, 9.500000000000099500 ) ; +#45515 = EDGE_LOOP ( 'NONE', ( #1574, #20761, #4818, #2783, #7484 ) ) ; +#45516 = ORIENTED_EDGE ( 'NONE', *, *, #34360, .F. ) ; +#45517 = EDGE_CURVE ( 'NONE', #4291, #998, #16787, .T. ) ; +#45518 = VERTEX_POINT ( 'NONE', #66543 ) ; +#45519 = ORIENTED_EDGE ( 'NONE', *, *, #51517, .F. ) ; +#45520 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57153, #75904, #13913, #57415 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353336549900E-007, 0.0007670609591621564600 ), + .UNSPECIFIED. ) ; +#45521 = EDGE_LOOP ( 'NONE', ( #76409, #3388, #70267 ) ) ; +#45522 = ORIENTED_EDGE ( 'NONE', *, *, #14620, .F. ) ; +#45524 = VERTEX_POINT ( 'NONE', #16770 ) ; +#45523 = CARTESIAN_POINT ( 'NONE', ( 2.785741443455752800, 90.07527064970079800, -28.39317435246150000 ) ) ; +#45525 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 1.000000000000014400, -1.205558038030002800 ) ) ; +#45526 = EDGE_LOOP ( 'NONE', ( #24652, #31744, #10078, #29407 ) ) ; +#45527 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655543400, 41.67701665379215800, -28.20555803802997400 ) ) ; +#45528 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155235200, 56.13383585008170900, -28.37247596307107100 ) ) ; +#45529 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489669500, 41.44069092601377900, -28.35186440610859600 ) ) ; +#45530 = ORIENTED_EDGE ( 'NONE', *, *, #29771, .T. ) ; +#45531 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45532 = CIRCLE ( 'NONE', #54271, 10.00000000000009400 ) ; +#45533 = EDGE_CURVE ( 'NONE', #25226, #51136, #64499, .T. ) ; +#45535 = EDGE_CURVE ( 'NONE', #6355, #23839, #79080, .T. ) ; +#45534 = ORIENTED_EDGE ( 'NONE', *, *, #69940, .T. ) ; +#45536 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033300, 71.46283204837304500, -28.48697406221691300 ) ) ; +#45537 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045800, 90.36203212531218300, -28.38801640354843400 ) ) ; +#45538 = VERTEX_POINT ( 'NONE', #23292 ) ; +#45539 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45540 = FACE_OUTER_BOUND ( 'NONE', #11465, .T. ) ; +#45541 = AXIS2_PLACEMENT_3D ( 'NONE', #55953, #18704, #62236 ) ; +#45542 = EDGE_CURVE ( 'NONE', #79539, #38287, #72710, .T. ) ; +#45543 = EDGE_CURVE ( 'NONE', #51373, #58204, #29469, .T. ) ; +#45544 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.123439965394496900E-014, 0.0000000000000000000 ) ) ; +#45545 = EDGE_CURVE ( 'NONE', #38041, #57039, #58226, .T. ) ; +#45547 = ORIENTED_EDGE ( 'NONE', *, *, #32602, .F. ) ; +#45546 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 30.93250300240228900, -28.20555803802996700 ) ) ; +#45548 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10407, #60194, #29215, #72700 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884731400 ), + .UNSPECIFIED. ) ; +#45549 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999954900, 81.43250300240198700, -28.20555803803047800 ) ) ; +#45550 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079818400, 71.43383669612080700, -28.27375072930982100 ) ) ; +#45551 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#45552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45553 = AXIS2_PLACEMENT_3D ( 'NONE', #3045, #59090, #40310 ) ; +#45554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45555 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146666200, 49.30869142985031300, -28.37223374938522000 ) ) ; +#45556 = FACE_OUTER_BOUND ( 'NONE', #35066, .T. ) ; +#45557 = ORIENTED_EDGE ( 'NONE', *, *, #5498, .F. ) ; +#45558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45559 = VERTEX_POINT ( 'NONE', #5051 ) ; +#45560 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000381000, 79.63176086632779500, -28.70555803802999500 ) ) ; +#45561 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454043900, 52.51973550835661800, -28.70555803802997400 ) ) ; +#45562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45563 = AXIS2_PLACEMENT_3D ( 'NONE', #34774, #3730, #59519 ) ; +#45564 = CARTESIAN_POINT ( 'NONE', ( 16.52197549498846000, 28.62306210240189600, -28.54786661478397700 ) ) ; +#45565 = AXIS2_PLACEMENT_3D ( 'NONE', #22860, #66389, #29170 ) ; +#45566 = ADVANCED_FACE ( 'NONE', ( #45934 ), #43973, .T. ) ; +#45567 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428560500, 18.07141756547892400, -28.70555803802992800 ) ) ; +#45568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45569 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#45570 = CONICAL_SURFACE ( 'NONE', #24418, 10.00000000000009400, 0.7853981633974447300 ) ; +#45571 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 6.833333333333344600, -9.205558038030003900 ) ) ; +#45572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45573 = CARTESIAN_POINT ( 'NONE', ( 15.07025710783656100, 9.859485784326881900, -28.70457077705549100 ) ) ; +#45574 = FACE_OUTER_BOUND ( 'NONE', #72864, .T. ) ; +#45575 = ORIENTED_EDGE ( 'NONE', *, *, #80271, .T. ) ; +#45576 = VERTEX_POINT ( 'NONE', #17593 ) ; +#45577 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45578 = ADVANCED_FACE ( 'NONE', ( #33322 ), #58611, .T. ) ; +#45579 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45580 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346246500, 80.20590598242371500, -28.39369363572360800 ) ) ; +#45581 = EDGE_CURVE ( 'NONE', #45791, #54505, #75160, .T. ) ; +#45582 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#45583 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45584 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#45585 = CIRCLE ( 'NONE', #18065, 10.50000000000009600 ) ; +#45586 = PLANE ( 'NONE', #48922 ) ; +#45587 = ORIENTED_EDGE ( 'NONE', *, *, #59436, .F. ) ; +#45588 = CIRCLE ( 'NONE', #79244, 10.00000000000009200 ) ; +#45589 = ORIENTED_EDGE ( 'NONE', *, *, #8264, .F. ) ; +#45590 = CARTESIAN_POINT ( 'NONE', ( 12.29416214178218600, 24.54999999999999700, -28.37136602294608400 ) ) ; +#45591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45592 = EDGE_LOOP ( 'NONE', ( #8840, #868, #35586, #17407 ) ) ; +#45593 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701700, 42.40456253568395100, -28.61277292027075700 ) ) ; +#45594 = EDGE_LOOP ( 'NONE', ( #10152, #68098, #49495, #22460 ) ) ; +#45595 = ADVANCED_FACE ( 'NONE', ( #10935 ), #8935, .T. ) ; +#45596 = EDGE_CURVE ( 'NONE', #10618, #75076, #43730, .T. ) ; +#45597 = CIRCLE ( 'NONE', #66357, 10.00000000000009200 ) ; +#45598 = ORIENTED_EDGE ( 'NONE', *, *, #10411, .T. ) ; +#45599 = ORIENTED_EDGE ( 'NONE', *, *, #2110, .F. ) ; +#45600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45601 = AXIS2_PLACEMENT_3D ( 'NONE', #45703, #8452, #51954 ) ; +#45602 = EDGE_LOOP ( 'NONE', ( #5389, #41207, #57696, #77311 ) ) ; +#45603 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29257, #4176, #41687, #4439 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867024206700E-007, 0.001052545149296782400 ), + .UNSPECIFIED. ) ; +#45604 = ORIENTED_EDGE ( 'NONE', *, *, #50663, .F. ) ; +#45605 = CARTESIAN_POINT ( 'NONE', ( -4.502075021551476700, 50.60145251508603800, -28.70555803802997700 ) ) ; +#45606 = ORIENTED_EDGE ( 'NONE', *, *, #74089, .T. ) ; +#45607 = ORIENTED_EDGE ( 'NONE', *, *, #63600, .F. ) ; +#45608 = ORIENTED_EDGE ( 'NONE', *, *, #76290, .T. ) ; +#45609 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857115300, 36.92318720225497900, -28.70555803802995200 ) ) ; +#45610 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45611 = ADVANCED_FACE ( 'NONE', ( #25544 ), #56643, .F. ) ; +#45612 = VERTEX_POINT ( 'NONE', #5601 ) ; +#45613 = FACE_OUTER_BOUND ( 'NONE', #9628, .T. ) ; +#45614 = AXIS2_PLACEMENT_3D ( 'NONE', #61000, #5223, #48705 ) ; +#45616 = ORIENTED_EDGE ( 'NONE', *, *, #39138, .T. ) ; +#45615 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45617 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650650200, 20.51912043132467600, -28.30223257055579100 ) ) ; +#45618 = ORIENTED_EDGE ( 'NONE', *, *, #11176, .T. ) ; +#45619 = ORIENTED_EDGE ( 'NONE', *, *, #75703, .F. ) ; +#45620 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#45621 = CIRCLE ( 'NONE', #20303, 9.500000000000095900 ) ; +#45622 = ADVANCED_FACE ( 'NONE', ( #12893 ), #23582, .F. ) ; +#45623 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 50.50000000000002100, -4.865812075874393000 ) ) ; +#45624 = AXIS2_PLACEMENT_3D ( 'NONE', #68829, #31580, #75096 ) ; +#45625 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 49.57141756547891700, -28.70555803802996700 ) ) ; +#45626 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333100, 24.55000000000001500, -28.70555803802994200 ) ) ; +#45627 = ORIENTED_EDGE ( 'NONE', *, *, #12372, .F. ) ; +#45628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45629 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 15.50000000000002100, -7.061964498581016200 ) ) ; +#45630 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 41.24660241562182300, -28.20555803802996700 ) ) ; +#45631 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328251000, 51.93585231025954800, -28.38420446581291400 ) ) ; +#45632 = EDGE_CURVE ( 'NONE', #18771, #46876, #40104, .T. ) ; +#45633 = FACE_OUTER_BOUND ( 'NONE', #34021, .T. ) ; +#45634 = ORIENTED_EDGE ( 'NONE', *, *, #40458, .T. ) ; +#45635 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 73.42856308690585400, -28.36981695106784000 ) ) ; +#45636 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 52.83333333333335000, 1.741883078712340300 ) ) ; +#45637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45638 = ORIENTED_EDGE ( 'NONE', *, *, #75384, .T. ) ; +#45639 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999996800, 38.41684396980713200, -28.70555803802995200 ) ) ; +#45640 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274716100, 35.04999999999996900, -28.20555803802995200 ) ) ; +#45641 = ORIENTED_EDGE ( 'NONE', *, *, #75235, .F. ) ; +#45642 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784465000, 56.12096679557679100, -28.36604143581850200 ) ) ; +#45643 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64082, #14295, #76554, #39284 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345058700, 0.0008131256040089979200 ), + .UNSPECIFIED. ) ; +#45644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45645 = EDGE_CURVE ( 'NONE', #55937, #72544, #29361, .T. ) ; +#45646 = CONICAL_SURFACE ( 'NONE', #20727, 10.00000000000009400, 0.7853981633974447300 ) ; +#45647 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148450900, 13.09761904761897000, -28.70555803803009500 ) ) ; +#45648 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44197, #38232, #44462, #7227 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932795529600 ), + .UNSPECIFIED. ) ; +#45649 = FACE_OUTER_BOUND ( 'NONE', #52894, .T. ) ; +#45650 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040100600, 77.94142842854277800, -28.37229765499293100 ) ) ; +#45651 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086484600, 20.12812581275677500, -28.37194250757535500 ) ) ; +#45652 = ORIENTED_EDGE ( 'NONE', *, *, #35956, .F. ) ; +#45653 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45656 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30824, #68072, #49525, #12329 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352939623900E-007, 0.0007670609591620242900 ), + .UNSPECIFIED. ) ; +#45657 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 33.39610994602603700, -28.37519436813182600 ) ) ; +#45658 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384630600, 70.79999999999998300, -28.55171188418376000 ) ) ; +#45659 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841333000, 70.16349705304836000, -28.30782889147497600 ) ) ; +#45660 = AXIS2_PLACEMENT_3D ( 'NONE', #79049, #41746, #4497 ) ; +#45661 = ORIENTED_EDGE ( 'NONE', *, *, #57366, .T. ) ; +#45662 = EDGE_CURVE ( 'NONE', #40503, #78197, #14846, .T. ) ; +#45663 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#45664 = EDGE_CURVE ( 'NONE', #20905, #46310, #365, .T. ) ; +#45665 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#45666 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35034, #78554, #47469, #10264 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549254487900E-007, 0.0008759529789574159400 ), + .UNSPECIFIED. ) ; +#45667 = FACE_OUTER_BOUND ( 'NONE', #75921, .T. ) ; +#45668 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844492300, 85.46616414991827100, -28.37247596307092200 ) ) ; +#45670 = ORIENTED_EDGE ( 'NONE', *, *, #62618, .T. ) ; +#45669 = EDGE_CURVE ( 'NONE', #53675, #33097, #73220, .T. ) ; +#45671 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45672 = CIRCLE ( 'NONE', #67206, 10.00000000000009600 ) ; +#45673 = ORIENTED_EDGE ( 'NONE', *, *, #37590, .F. ) ; +#45674 = AXIS2_PLACEMENT_3D ( 'NONE', #72093, #47276, #10050 ) ; +#45675 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 56.33333333333334300, 2.794441961969998300 ) ) ; +#45676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45678 = CIRCLE ( 'NONE', #2687, 10.50000000000009600 ) ; +#45679 = VERTEX_POINT ( 'NONE', #37114 ) ; +#45680 = EDGE_LOOP ( 'NONE', ( #9017, #17385, #48413, #35960 ) ) ; +#45681 = ORIENTED_EDGE ( 'NONE', *, *, #36281, .F. ) ; +#45682 = ORIENTED_EDGE ( 'NONE', *, *, #73121, .T. ) ; +#45683 = ORIENTED_EDGE ( 'NONE', *, *, #66333, .T. ) ; +#45684 = ORIENTED_EDGE ( 'NONE', *, *, #68336, .T. ) ; +#45685 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841332300, 90.16349705304836000, -28.30782889147497600 ) ) ; +#45686 = ADVANCED_FACE ( 'NONE', ( #60583 ), #38131, .F. ) ; +#45687 = AXIS2_PLACEMENT_3D ( 'NONE', #5655, #67945, #48612 ) ; +#45688 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 69.94924284854742800, -28.20555803802997700 ) ) ; +#45689 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#45690 = ORIENTED_EDGE ( 'NONE', *, *, #73629, .F. ) ; +#45691 = AXIS2_PLACEMENT_3D ( 'NONE', #57969, #2188, #76724 ) ; +#45692 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410165800, 80.46048989987068000, -28.36889022317254200 ) ) ; +#45693 = EDGE_CURVE ( 'NONE', #34228, #66366, #54699, .T. ) ; +#45694 = EDGE_CURVE ( 'NONE', #28981, #114, #66716, .T. ) ; +#45695 = AXIS2_PLACEMENT_3D ( 'NONE', #10552, #54047, #16812 ) ; +#45696 = ORIENTED_EDGE ( 'NONE', *, *, #17148, .F. ) ; +#45697 = CONICAL_SURFACE ( 'NONE', #9362, 10.50000000000009600, 0.7853981633974518300 ) ; +#45698 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45699 = ORIENTED_EDGE ( 'NONE', *, *, #27263, .T. ) ; +#45700 = ORIENTED_EDGE ( 'NONE', *, *, #60781, .T. ) ; +#45701 = ADVANCED_FACE ( 'NONE', ( #71255 ), #69295, .T. ) ; +#45702 = ORIENTED_EDGE ( 'NONE', *, *, #25357, .T. ) ; +#45703 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#45704 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12733, #183, #62482, #25230 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962715195100, 0.0008252574424210347300 ), + .UNSPECIFIED. ) ; +#45705 = ADVANCED_FACE ( 'NONE', ( #77110 ), #27494, .T. ) ; +#45706 = CIRCLE ( 'NONE', #7137, 10.50000000000009800 ) ; +#45707 = EDGE_CURVE ( 'NONE', #56473, #50347, #52204, .T. ) ; +#45708 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 21.50000000000002800, -7.061964498581022400 ) ) ; +#45709 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#45710 = AXIS2_PLACEMENT_3D ( 'NONE', #62718, #13229, #671 ) ; +#45711 = EDGE_LOOP ( 'NONE', ( #24428, #16921, #76020 ) ) ; +#45712 = AXIS2_PLACEMENT_3D ( 'NONE', #71226, #33968, #77484 ) ; +#45713 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27665, #64935, #21401, #71148 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001707792749031583100 ), + .UNSPECIFIED. ) ; +#45714 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#45715 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368900, 60.79999999999998300, -28.55171188418376000 ) ) ; +#45716 = EDGE_LOOP ( 'NONE', ( #42414, #30697, #77496, #9684 ) ) ; +#45717 = ADVANCED_FACE ( 'NONE', ( #21641 ), #3105, .F. ) ; +#45718 = CIRCLE ( 'NONE', #56126, 9.500000000000097700 ) ; +#45719 = ORIENTED_EDGE ( 'NONE', *, *, #70221, .T. ) ; +#45720 = EDGE_LOOP ( 'NONE', ( #30403, #76313, #36947 ) ) ; +#45721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45722 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660889700, 90.13716795162605400, -28.48697406221735000 ) ) ; +#45723 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428612000, 39.07141756547895300, -28.70555803802995200 ) ) ; +#45724 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#45725 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 65.00000000000000000, 6.794441961969995200 ) ) ; +#45726 = AXIS2_PLACEMENT_3D ( 'NONE', #27134, #64418, #76894 ) ; +#45727 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 10.28933626866497300, -28.53923937255169500 ) ) ; +#45728 = FACE_OUTER_BOUND ( 'NONE', #19663, .T. ) ; +#45729 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 90.69966441803890700, -28.70555803802997700 ) ) ; +#45730 = ORIENTED_EDGE ( 'NONE', *, *, #19157, .T. ) ; +#45731 = ORIENTED_EDGE ( 'NONE', *, *, #29856, .F. ) ; +#45732 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45734 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45735 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#45736 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042484800, 32.09027028261001400, -28.70555803802994900 ) ) ; +#45737 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#45738 = AXIS2_PLACEMENT_3D ( 'NONE', #17659, #61183, #23920 ) ; +#45739 = CARTESIAN_POINT ( 'NONE', ( -4.957239735864543000, 65.79999999999999700, -28.53819074160684000 ) ) ; +#45740 = CARTESIAN_POINT ( 'NONE', ( 5.727308459283293000, 55.79999999999950700, -28.53979898350186800 ) ) ; +#45741 = EDGE_CURVE ( 'NONE', #48925, #6558, #37757, .T. ) ; +#45742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45743 = FACE_OUTER_BOUND ( 'NONE', #17038, .T. ) ; +#45744 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .T. ) ; +#45745 = CARTESIAN_POINT ( 'NONE', ( -22.16360899856029200, 2.836391001439843700, -25.93569519633415900 ) ) ; +#45746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45747 = ORIENTED_EDGE ( 'NONE', *, *, #75045, .T. ) ; +#45748 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 27.33333333333335000, -5.535685056952199400 ) ) ; +#45749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45751 = ORIENTED_EDGE ( 'NONE', *, *, #50078, .T. ) ; +#45750 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51836, #2087, #27141, #70638 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349270652000E-007, 0.0004318366892326769000 ), + .UNSPECIFIED. ) ; +#45752 = FACE_OUTER_BOUND ( 'NONE', #78251, .T. ) ; +#45753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45754 = ORIENTED_EDGE ( 'NONE', *, *, #68562, .T. ) ; +#45755 = ORIENTED_EDGE ( 'NONE', *, *, #2648, .F. ) ; +#45756 = ORIENTED_EDGE ( 'NONE', *, *, #45427, .F. ) ; +#45757 = PLANE ( 'NONE', #33923 ) ; +#45758 = ORIENTED_EDGE ( 'NONE', *, *, #50088, .T. ) ; +#45759 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67831, #24318, #80334, #43048 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418720000, 0.001049055495481844900 ), + .UNSPECIFIED. ) ; +#45760 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 55.92347538297997300, -28.70555803802997700 ) ) ; +#45761 = EDGE_LOOP ( 'NONE', ( #57614, #56062, #77396 ) ) ; +#45762 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45763 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45765 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45766 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 80.79999999999999700, -28.55171188418376700 ) ) ; +#45767 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#45768 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#45769 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#45770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45771 = CARTESIAN_POINT ( 'NONE', ( -10.07349184251535800, 60.22161678501182500, -28.29547179040443400 ) ) ; +#45772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15874, #77894, #65676, #28432 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.589900327696125400E-017, 0.001179148174662937400 ), + .UNSPECIFIED. ) ; +#45773 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#45774 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#45775 = FACE_OUTER_BOUND ( 'NONE', #25404, .T. ) ; +#45777 = EDGE_CURVE ( 'NONE', #69853, #49759, #19678, .T. ) ; +#45776 = ORIENTED_EDGE ( 'NONE', *, *, #43994, .T. ) ; +#45778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45779 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498187800, 31.10172914845358600, -28.24094723680243700 ) ) ; +#45780 = ORIENTED_EDGE ( 'NONE', *, *, #55818, .F. ) ; +#45781 = ORIENTED_EDGE ( 'NONE', *, *, #8112, .T. ) ; +#45782 = EDGE_CURVE ( 'NONE', #34010, #4221, #5063, .T. ) ; +#45783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45784 = ORIENTED_EDGE ( 'NONE', *, *, #62588, .F. ) ; +#45785 = ORIENTED_EDGE ( 'NONE', *, *, #40101, .F. ) ; +#45786 = PLANE ( 'NONE', #80774 ) ; +#45787 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826460000, 81.64948861668521800, -28.33414295261598800 ) ) ; +#45788 = CONICAL_SURFACE ( 'NONE', #63421, 10.50000000000009600, 0.7853981633974500600 ) ; +#45789 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 49.41070809551059300, -28.20555803802996700 ) ) ; +#45790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45791 = VERTEX_POINT ( 'NONE', #19449 ) ; +#45792 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33426, #39679, #77216, #39954 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459157942702700E-007, 0.0007679767755142522800 ), + .UNSPECIFIED. ) ; +#45793 = EDGE_CURVE ( 'NONE', #50398, #6862, #23326, .T. ) ; +#45794 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 73.65857157145660500, -28.20555803803030800 ) ) ; +#45795 = EDGE_CURVE ( 'NONE', #7944, #780, #52740, .T. ) ; +#45796 = AXIS2_PLACEMENT_3D ( 'NONE', #8795, #52301, #15083 ) ; +#45797 = CIRCLE ( 'NONE', #10759, 9.500000000000097700 ) ; +#45798 = VERTEX_POINT ( 'NONE', #69476 ) ; +#45799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45800 = ADVANCED_FACE ( 'NONE', ( #42046 ), #32227, .T. ) ; +#45801 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 71.00000000000002800, -1.205558038030005300 ) ) ; +#45802 = AXIS2_PLACEMENT_3D ( 'NONE', #55776, #18530, #62066 ) ; +#45803 = EDGE_CURVE ( 'NONE', #64652, #38060, #67359, .T. ) ; +#45804 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 2, ( #71013, #2455, #40005, #2714, #46230, #8966, #52490, #15265, #58775, #79046, #27537, #71023, #33767, #77279, #40016, #2721, #46239, #8974, #52503, #15276, #58781, #21541, #65073, #27807, #71292, #34036, #77553, #40273, #3006, #46495, #9257, #52781, #15545, #59048, #21808, #65353, #28082, #71571, #34311, #77817, #40547, #3271, #46779, #9537, #53047, #15800, #59328, #22073, #65602, #28367, #71851, #34587, #78088, #40815, #3545, #47049, #9821, #53326, #16080, #59604, #22332, #65867, #28637, #72126, #34855, #78373, #41091, #3817, #47309, #10094, #53606, #16356, #59882, #22601, #66137, #28908, #72400, #35138, #78649 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.6729274660196560300, 0.6759259259259259300, 0.6805555555555555800, 0.6851851851851851200, 0.6898148148148148800, 0.6944444444444444200, 0.6990740740740740700, 0.7037037037037037200, 0.7083333333333332600, 0.7129629629629630200, 0.7175925925925925600, 0.7222222222222222100, 0.7268518518518518600, 0.7314814814814814000, 0.7361111111111111600, 0.7407407407407407000, 0.7453703703703703500, 0.7500000000000000000, 0.7546296296296296500, 0.7592592592592593000, 0.7638888888888888400, 0.7685185185185184900, 0.7731481481481481400, 0.7777777777777777900, 0.7824074074074074400, 0.7870370370370369800, 0.7916666666666666300, 0.7962962962962962800, 0.8009259259259259300, 0.8055555555555555800, 0.8101851851851851200, 0.8148148148148148800, 0.8194444444444444200, 0.8240740740740740700, 0.8287037037037037200, 0.8333333333333333700, 0.8379629629629630200, 0.8425925925925925600, 0.8472222222222222100, 0.8493094612075514600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 0.9844489316951370300, 0.9779312705583150800, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9659258262890683100, 1.000000000000000000, 0.9846378761473351100, 0.9831275833774533200 ) ) + REPRESENTATION_ITEM ( '' ) ); +#45805 = EDGE_CURVE ( 'NONE', #561, #16845, #8818, .T. ) ; +#45806 = EDGE_CURVE ( 'NONE', #31088, #74788, #75182, .T. ) ; +#45807 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.44142842854297000, -28.20555803802996700 ) ) ; +#45808 = ADVANCED_FACE ( 'NONE', ( #7013 ), #48828, .F. ) ; +#45809 = AXIS2_PLACEMENT_3D ( 'NONE', #25421, #68906, #6621 ) ; +#45810 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444413000, 79.72166103827298400, -28.53892303408254000 ) ) ; +#45811 = AXIS2_PLACEMENT_3D ( 'NONE', #7988, #76270, #14274 ) ; +#45812 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.60252595950259300, -28.26641963845861100 ) ) ; +#45813 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45814 = ORIENTED_EDGE ( 'NONE', *, *, #15103, .F. ) ; +#45815 = ORIENTED_EDGE ( 'NONE', *, *, #17295, .T. ) ; +#45816 = AXIS2_PLACEMENT_3D ( 'NONE', #35220, #41440, #72478 ) ; +#45817 = ORIENTED_EDGE ( 'NONE', *, *, #1841, .F. ) ; +#45818 = EDGE_CURVE ( 'NONE', #15059, #78359, #60738, .T. ) ; +#45819 = AXIS2_PLACEMENT_3D ( 'NONE', #29553, #73042, #35771 ) ; +#45820 = AXIS2_PLACEMENT_3D ( 'NONE', #61259, #79728, #67481 ) ; +#45821 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 72.31032580521099400, -28.59353418718932400 ) ) ; +#45822 = ADVANCED_FACE ( 'NONE', ( #36211 ), #15769, .F. ) ; +#45823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45824 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164800, 70.90033558196070400, -28.70555803803030800 ) ) ; +#45825 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 42.33333333333334300, -6.705558038030005700 ) ) ; +#45826 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45827 = FACE_OUTER_BOUND ( 'NONE', #56397, .T. ) ; +#45828 = ORIENTED_EDGE ( 'NONE', *, *, #14997, .F. ) ; +#45829 = EDGE_LOOP ( 'NONE', ( #19740, #74081, #7863, #18290, #12969 ) ) ; +#45830 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#45831 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372566700, 33.16464174796073600, -28.53896444442200700 ) ) ; +#45832 = CONICAL_SURFACE ( 'NONE', #77659, 10.00000000000009200, 0.7853981633974447300 ) ; +#45833 = EDGE_LOOP ( 'NONE', ( #32823, #47721, #7133, #2017 ) ) ; +#45834 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#45835 = ORIENTED_EDGE ( 'NONE', *, *, #42528, .F. ) ; +#45836 = CARTESIAN_POINT ( 'NONE', ( -11.80141306497121300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#45837 = CARTESIAN_POINT ( 'NONE', ( -16.53469939396896000, 9.232650303015518000, -28.58709120703527900 ) ) ; +#45838 = ORIENTED_EDGE ( 'NONE', *, *, #61591, .F. ) ; +#45839 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428500, 12.17681279774500600, -28.70555803802994200 ) ) ; +#45840 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45841 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818954800, 89.94924284854707300, -28.20555803802997700 ) ) ; +#45842 = ORIENTED_EDGE ( 'NONE', *, *, #51748, .T. ) ; +#45843 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45844 = FACE_OUTER_BOUND ( 'NONE', #30848, .T. ) ; +#45845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34990, #72253, #47433, #10222 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648719039000E-007, 0.0007596411030280992100 ), + .UNSPECIFIED. ) ; +#45846 = CARTESIAN_POINT ( 'NONE', ( 11.18653997827033200, 6.877501000802047000, -28.20555803803042500 ) ) ; +#45847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45849 = AXIS2_PLACEMENT_3D ( 'NONE', #733, #44221, #6994 ) ; +#45850 = ORIENTED_EDGE ( 'NONE', *, *, #38419, .T. ) ; +#45851 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609424100, 51.46283204837338600, -28.48697406221667800 ) ) ; +#45852 = FACE_OUTER_BOUND ( 'NONE', #15483, .T. ) ; +#45853 = CARTESIAN_POINT ( 'NONE', ( 17.38218670428150900, 17.89495213045234600, -28.41843566570053500 ) ) ; +#45854 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 4.666666666666680300, 5.722645192245505700 ) ) ; +#45855 = VERTEX_POINT ( 'NONE', #64060 ) ; +#45856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45857 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#45858 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#45859 = EDGE_LOOP ( 'NONE', ( #18160, #52974, #13298 ) ) ; +#45860 = VERTEX_POINT ( 'NONE', #57780 ) ; +#45861 = ORIENTED_EDGE ( 'NONE', *, *, #44338, .T. ) ; +#45862 = VERTEX_POINT ( 'NONE', #70271 ) ; +#45863 = CARTESIAN_POINT ( 'NONE', ( -16.57127784838931500, 60.12774695439684100, -28.53061079109372100 ) ) ; +#45864 = CONICAL_SURFACE ( 'NONE', #76378, 10.00000000000009600, 0.7853981633974482800 ) ; +#45865 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 9.936502946951316400, -28.30782889147480600 ) ) ; +#45866 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45867 = AXIS2_PLACEMENT_3D ( 'NONE', #4501, #47985, #10770 ) ; +#45868 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265454500, 80.27440177985818100, -28.29986836858019200 ) ) ; +#45869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45870 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#45871 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#45872 = EDGE_CURVE ( 'NONE', #55230, #28066, #32313, .T. ) ; +#45873 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708540700, 85.80000000000167400, -28.63843632546335300 ) ) ; +#45874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56569, #13084, #69096, #31845 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100398516300, 0.001249956855145818100 ), + .UNSPECIFIED. ) ; +#45875 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 73.65857157145693200, -28.20555803802997700 ) ) ; +#45876 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 65.79999999999996900, -28.70555803802997700 ) ) ; +#45877 = CARTESIAN_POINT ( 'NONE', ( -5.685965509778306200, 24.54999999999998300, -28.37321477197628300 ) ) ; +#45878 = AXIS2_PLACEMENT_3D ( 'NONE', #67456, #30224, #73715 ) ; +#45879 = CIRCLE ( 'NONE', #67001, 10.50000000000009600 ) ; +#45880 = EDGE_LOOP ( 'NONE', ( #22215, #518, #36365 ) ) ; +#45881 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45882 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 26.44142842854297000, -28.20555803802994200 ) ) ; +#45883 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217503000, 51.43945992495501000, -28.34042301926905700 ) ) ; +#45884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45885 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55697, #12213, #61997, #24713 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.170520653170729700E-016, 0.002676326193402513800 ), + .UNSPECIFIED. ) ; +#45886 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385151900, 17.99322649091106600, -28.30799595738880500 ) ) ; +#45887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45888 = ADVANCED_FACE ( 'NONE', ( #50769 ), #46874, .T. ) ; +#45889 = EDGE_CURVE ( 'NONE', #32971, #40326, #63472, .T. ) ; +#45890 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#45891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45893 = EDGE_CURVE ( 'NONE', #25542, #39110, #17724, .T. ) ; +#45892 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31050, #37267, #56049, #18801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466043697382400E-007, 0.0002929914227444504400 ), + .UNSPECIFIED. ) ; +#45894 = ORIENTED_EDGE ( 'NONE', *, *, #6966, .F. ) ; +#45895 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 20.43250300240229200, -28.20555803802995200 ) ) ; +#45896 = ORIENTED_EDGE ( 'NONE', *, *, #24523, .T. ) ; +#45897 = ADVANCED_FACE ( 'NONE', ( #80002 ), #61525, .T. ) ; +#45898 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 48.33333333333333600, 3.124568980892187500 ) ) ; +#45899 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45901 = EDGE_CURVE ( 'NONE', #71478, #44504, #46223, .T. ) ; +#45902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2072, #26858, #51560, #45561 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.341771812940338300E-018, 0.001179148174662945900 ), + .UNSPECIFIED. ) ; +#45903 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188003500, 9.569148358746641500, -28.45573375118225100 ) ) ; +#45904 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 13.33333333333335000, 5.722645192245503900 ) ) ; +#45905 = EDGE_CURVE ( 'NONE', #49715, #6870, #31812, .T. ) ; +#45906 = CONICAL_SURFACE ( 'NONE', #662, 10.00000000000009400, 0.7853981633974447300 ) ; +#45907 = VERTEX_POINT ( 'NONE', #2523 ) ; +#45908 = AXIS2_PLACEMENT_3D ( 'NONE', #52971, #59241, #21986 ) ; +#45909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45910 = ORIENTED_EDGE ( 'NONE', *, *, #25562, .T. ) ; +#45911 = EDGE_CURVE ( 'NONE', #74558, #75104, #17340, .T. ) ; +#45912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45913 = ORIENTED_EDGE ( 'NONE', *, *, #43293, .T. ) ; +#45914 = CIRCLE ( 'NONE', #30741, 10.50000000000009600 ) ; +#45915 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 50.66666666666667100, -6.705558038030000400 ) ) ; +#45916 = CARTESIAN_POINT ( 'NONE', ( 10.53518765398347900, 9.406791769321794000, -28.68794773163823600 ) ) ; +#45917 = VERTEX_POINT ( 'NONE', #77353 ) ; +#45918 = VERTEX_POINT ( 'NONE', #40072 ) ; +#45919 = EDGE_LOOP ( 'NONE', ( #23977, #26720, #26653 ) ) ; +#45920 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#45921 = AXIS2_PLACEMENT_3D ( 'NONE', #56911, #69401, #32160 ) ; +#45922 = CIRCLE ( 'NONE', #5112, 10.50000000000009800 ) ; +#45923 = EDGE_CURVE ( 'NONE', #39960, #69047, #2848, .T. ) ; +#45924 = EDGE_CURVE ( 'NONE', #44806, #54740, #13828, .T. ) ; +#45925 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 63.65857157145704500, -28.20555803803014400 ) ) ; +#45926 = EDGE_CURVE ( 'NONE', #39561, #60477, #69177, .T. ) ; +#45927 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#45928 = ADVANCED_FACE ( 'NONE', ( #30397 ), #11879, .T. ) ; +#45929 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#45930 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 70.51916201875668800, -28.45106778992437700 ) ) ; +#45931 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841388800, 20.43650294695131500, -28.30782889147480900 ) ) ; +#45932 = ORIENTED_EDGE ( 'NONE', *, *, #32705, .F. ) ; +#45933 = EDGE_LOOP ( 'NONE', ( #49750, #43331, #71004 ) ) ; +#45934 = FACE_OUTER_BOUND ( 'NONE', #75765, .T. ) ; +#45935 = AXIS2_PLACEMENT_3D ( 'NONE', #33407, #76922, #39661 ) ; +#45936 = ORIENTED_EDGE ( 'NONE', *, *, #19013, .F. ) ; +#45937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45938 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#45939 = EDGE_LOOP ( 'NONE', ( #16874, #3027, #24183, #53418 ) ) ; +#45940 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832100, 81.25732391202397800, -28.20555803802997700 ) ) ; +#45941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45942 = ORIENTED_EDGE ( 'NONE', *, *, #47373, .F. ) ; +#45943 = ORIENTED_EDGE ( 'NONE', *, *, #14742, .F. ) ; +#45944 = CONICAL_SURFACE ( 'NONE', #48613, 10.00000000000009200, 0.7853981633974447300 ) ; +#45945 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873300200, 71.70803673496189400, -28.29033182162404000 ) ) ; +#45946 = VERTEX_POINT ( 'NONE', #15613 ) ; +#45947 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819343900, 59.94924284854693000, -28.20555803802997700 ) ) ; +#45948 = EDGE_CURVE ( 'NONE', #58395, #146, #54721, .T. ) ; +#45949 = FACE_OUTER_BOUND ( 'NONE', #50437, .T. ) ; +#45950 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 90.52242369685797000, -28.53861367218593900 ) ) ; +#45951 = AXIS2_PLACEMENT_3D ( 'NONE', #74568, #37265, #14 ) ; +#45952 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#45953 = AXIS2_PLACEMENT_3D ( 'NONE', #20026, #63551, #57262 ) ; +#45954 = VERTEX_POINT ( 'NONE', #65412 ) ; +#45955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#45956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3690, #78239, #34732, #47189 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635238143200E-007, 0.0008082706238600631500 ), + .UNSPECIFIED. ) ; +#45957 = ORIENTED_EDGE ( 'NONE', *, *, #20711, .T. ) ; +#45958 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#45959 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655685100, 38.92298334620757300, -28.20555803802996000 ) ) ; +#45960 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 9.746602415621723000, -28.20555803803009500 ) ) ; +#45961 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.16666666666667100, -3.349151577478988200 ) ) ; +#45962 = CARTESIAN_POINT ( 'NONE', ( -16.88106447389087000, 70.49763722318498100, -28.32100408376067300 ) ) ; +#45963 = FACE_OUTER_BOUND ( 'NONE', #43875, .T. ) ; +#45964 = ORIENTED_EDGE ( 'NONE', *, *, #14273, .T. ) ; +#45965 = SHAPE_DEFINITION_REPRESENTATION ( #33735, #54491 ) ; +#45966 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857124100, 26.42318720225497600, -28.70555803802994200 ) ) ; +#45967 = AXIS2_PLACEMENT_3D ( 'NONE', #570, #44065, #6838 ) ; +#45968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45969 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530700, 45.55000000000000400, -28.20555803802996700 ) ) ; +#45970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45971 = AXIS2_PLACEMENT_3D ( 'NONE', #30446, #36660, #67690 ) ; +#45972 = CARTESIAN_POINT ( 'NONE', ( -8.616843969805909600, 74.79999999999820700, -28.70555803802997700 ) ) ; +#45973 = EDGE_CURVE ( 'NONE', #31791, #37576, #78052, .T. ) ; +#45974 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223634200, 79.83407839971529500, -28.37510699173776600 ) ) ; +#45975 = ORIENTED_EDGE ( 'NONE', *, *, #57285, .T. ) ; +#45976 = AXIS2_PLACEMENT_3D ( 'NONE', #45440, #26747, #27017 ) ; +#45977 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433500, 57.93535825203924400, -28.53896444442201400 ) ) ; +#45978 = ORIENTED_EDGE ( 'NONE', *, *, #71343, .T. ) ; +#45979 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 19.33333333333334600, 2.794441961969998300 ) ) ; +#45980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45982 = AXIS2_PLACEMENT_3D ( 'NONE', #11170, #54666, #17414 ) ; +#45981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24193, #61470, #36680, #80203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549120749300E-007, 0.0008759529789574139900 ), + .UNSPECIFIED. ) ; +#45983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#45984 = ORIENTED_EDGE ( 'NONE', *, *, #23237, .F. ) ; +#45985 = CARTESIAN_POINT ( 'NONE', ( -16.56486952901389400, 9.217576176120438400, -28.58240548800995400 ) ) ; +#45986 = ADVANCED_FACE ( 'NONE', ( #34266 ), #42982, .T. ) ; +#45987 = CIRCLE ( 'NONE', #61112, 9.500000000000097700 ) ; +#45988 = ORIENTED_EDGE ( 'NONE', *, *, #46632, .F. ) ; +#45989 = CIRCLE ( 'NONE', #56583, 9.500000000000097700 ) ; +#45990 = AXIS2_PLACEMENT_3D ( 'NONE', #35800, #42033, #73080 ) ; +#45991 = ORIENTED_EDGE ( 'NONE', *, *, #20803, .T. ) ; +#45992 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001200, 10.46823913367203900, -28.70555803802994200 ) ) ; +#45993 = FACE_OUTER_BOUND ( 'NONE', #68423, .T. ) ; +#45994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56604, #19346, #62883, #25632 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465980609200E-007, 0.0004435563144346458100 ), + .UNSPECIFIED. ) ; +#45995 = VERTEX_POINT ( 'NONE', #34651 ) ; +#45996 = VERTEX_POINT ( 'NONE', #78166 ) ; +#45997 = ADVANCED_FACE ( 'NONE', ( #28458 ), #65671, .T. ) ; +#45998 = CONICAL_SURFACE ( 'NONE', #23849, 10.50000000000009600, 0.7853981633974518300 ) ; +#45999 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46000 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46001 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 62.83333333333334300, -9.205558038030003900 ) ) ; +#46002 = EDGE_LOOP ( 'NONE', ( #53330, #23801, #2041 ) ) ; +#46003 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46004 = FACE_OUTER_BOUND ( 'NONE', #7607, .T. ) ; +#46005 = CARTESIAN_POINT ( 'NONE', ( -17.21438282754749600, 8.188762942183371900, -28.43250299045104200 ) ) ; +#46006 = EDGE_CURVE ( 'NONE', #14016, #2167, #76082, .T. ) ; +#46007 = ORIENTED_EDGE ( 'NONE', *, *, #69192, .F. ) ; +#46008 = ADVANCED_FACE ( 'NONE', ( #1146 ), #57590, .T. ) ; +#46009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46011 = EDGE_CURVE ( 'NONE', #76520, #21820, #40256, .T. ) ; +#46010 = EDGE_LOOP ( 'NONE', ( #33782, #6709, #51133, #45147 ) ) ; +#46012 = EDGE_LOOP ( 'NONE', ( #67176, #79753, #21537, #47292, #18805, #19415, #65124, #22106 ) ) ; +#46013 = CARTESIAN_POINT ( 'NONE', ( 1.561251128379126400E-014, 32.47376207875059600, -28.70555803802996700 ) ) ; +#46014 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310462200, 39.10230989102910100, -28.61774594594333000 ) ) ; +#46015 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.96823913367204300, -28.70555803802997700 ) ) ; +#46016 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 80.13716795162659400, -28.48697406221667400 ) ) ; +#46017 = ORIENTED_EDGE ( 'NONE', *, *, #23210, .T. ) ; +#46018 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46019 = FACE_OUTER_BOUND ( 'NONE', #30940, .T. ) ; +#46020 = EDGE_CURVE ( 'NONE', #67211, #5802, #25829, .T. ) ; +#46021 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46022 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48977, #5505, #67788, #30549 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695386940833800E-007, 0.0007987676590763776000 ), + .UNSPECIFIED. ) ; +#46023 = ADVANCED_FACE ( 'NONE', ( #9914 ), #24509, .T. ) ; +#46024 = ORIENTED_EDGE ( 'NONE', *, *, #58622, .T. ) ; +#46025 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#46026 = VERTEX_POINT ( 'NONE', #4166 ) ; +#46027 = CARTESIAN_POINT ( 'NONE', ( -17.77438981481022000, 4.451220370379395800, -27.04757241308028500 ) ) ; +#46028 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056689600, 35.04999999999997600, -28.70555803802995200 ) ) ; +#46029 = EDGE_CURVE ( 'NONE', #73931, #2651, #41053, .T. ) ; +#46030 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 25.16666666666666400, 3.794441961969996900 ) ) ; +#46031 = EDGE_CURVE ( 'NONE', #7865, #52802, #11370, .T. ) ; +#46032 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000408600, 67.94142842854304800, -28.20555803803030800 ) ) ; +#46033 = ORIENTED_EDGE ( 'NONE', *, *, #76150, .F. ) ; +#46034 = FACE_OUTER_BOUND ( 'NONE', #20285, .T. ) ; +#46035 = PLANE ( 'NONE', #79871 ) ; +#46036 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155506100, 75.79999999999967000, -28.20555803803030800 ) ) ; +#46037 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844490300, 76.13383585008155300, -28.37247596307075900 ) ) ; +#46038 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46039 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725658600, 43.66464174796073600, -28.53896444442201400 ) ) ; +#46040 = ADVANCED_FACE ( 'NONE', ( #65446 ), #55635, .T. ) ; +#46041 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 71.43650294695081000, -28.30782889147504400 ) ) ; +#46042 = EDGE_CURVE ( 'NONE', #35371, #56537, #72225, .T. ) ; +#46043 = EDGE_CURVE ( 'NONE', #35603, #63397, #44900, .T. ) ; +#46044 = PLANE ( 'NONE', #1659 ) ; +#46045 = EDGE_CURVE ( 'NONE', #78682, #21527, #7939, .T. ) ; +#46046 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000104400, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46047 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41413, #78711, #53922, #16678 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736094835600E-007, 0.0006649316450229723200 ), + .UNSPECIFIED. ) ; +#46048 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46049 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#46050 = CARTESIAN_POINT ( 'NONE', ( 16.42208926844542200, 49.61339344823292000, -28.58282679407406900 ) ) ; +#46051 = AXIS2_PLACEMENT_3D ( 'NONE', #18153, #61693, #24417 ) ; +#46052 = CONICAL_SURFACE ( 'NONE', #35225, 10.00000000000009600, 0.7853981633974447300 ) ; +#46053 = CARTESIAN_POINT ( 'NONE', ( 10.03178561562192300, 61.31767869357327800, -28.25052235028445200 ) ) ; +#46054 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 60.34267608797601700, -28.20555803802997700 ) ) ; +#46055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46056 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534557800, 40.60079448659599400, -28.70555803802996700 ) ) ; +#46057 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 61.43945992495501700, -28.34042301926910000 ) ) ; +#46058 = ORIENTED_EDGE ( 'NONE', *, *, #10971, .F. ) ; +#46059 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 75.79999999999982700, -28.20555803803014400 ) ) ; +#46060 = AXIS2_PLACEMENT_3D ( 'NONE', #36116, #29624, #79635 ) ; +#46061 = AXIS2_PLACEMENT_3D ( 'NONE', #26210, #69696, #32432 ) ; +#46062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46063 = AXIS2_PLACEMENT_3D ( 'NONE', #27365, #70835, #33588 ) ; +#46065 = ORIENTED_EDGE ( 'NONE', *, *, #58580, .T. ) ; +#46064 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003400, 70.24722181384551300, -28.70555803803016200 ) ) ; +#46066 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807117500, 56.79999999999993300, -28.70555803802997700 ) ) ; +#46067 = CIRCLE ( 'NONE', #51631, 10.00000000000009600 ) ; +#46068 = VERTEX_POINT ( 'NONE', #54194 ) ; +#46069 = CONICAL_SURFACE ( 'NONE', #11215, 10.00000000000009400, 0.7853981633974447300 ) ; +#46070 = ORIENTED_EDGE ( 'NONE', *, *, #20208, .F. ) ; +#46071 = ORIENTED_EDGE ( 'NONE', *, *, #6703, .F. ) ; +#46072 = FACE_OUTER_BOUND ( 'NONE', #52638, .T. ) ; +#46073 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80055, #5532, #49000, #11803 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957553608500E-005, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#46074 = VERTEX_POINT ( 'NONE', #41949 ) ; +#46075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46076 = ORIENTED_EDGE ( 'NONE', *, *, #21747, .F. ) ; +#46077 = EDGE_LOOP ( 'NONE', ( #60112, #72369, #54776 ) ) ; +#46078 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 68.83333333333334300, 0.9380355014189731800 ) ) ; +#46079 = AXIS2_PLACEMENT_3D ( 'NONE', #5129, #48619, #11406 ) ; +#46080 = EDGE_CURVE ( 'NONE', #33477, #77717, #77662, .T. ) ; +#46081 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 61.68929190448861300, -28.20555803803030800 ) ) ; +#46082 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823702100, 38.19543746431600100, -28.61277292027075700 ) ) ; +#46083 = FACE_OUTER_BOUND ( 'NONE', #60253, .T. ) ; +#46084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46085 = ORIENTED_EDGE ( 'NONE', *, *, #59756, .F. ) ; +#46086 = FACE_OUTER_BOUND ( 'NONE', #74948, .T. ) ; +#46087 = EDGE_LOOP ( 'NONE', ( #42055, #6244, #31131 ) ) ; +#46088 = EDGE_CURVE ( 'NONE', #77113, #61209, #63222, .T. ) ; +#46089 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042455500, 21.59027028261003500, -28.70555803802994500 ) ) ; +#46090 = ORIENTED_EDGE ( 'NONE', *, *, #6756, .T. ) ; +#46091 = AXIS2_PLACEMENT_3D ( 'NONE', #66541, #29332, #72802 ) ; +#46092 = ORIENTED_EDGE ( 'NONE', *, *, #5803, .F. ) ; +#46093 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120802500, 70.38098890548042200, -28.33427604305568800 ) ) ; +#46094 = EDGE_LOOP ( 'NONE', ( #20513, #15735, #59959 ) ) ; +#46095 = FACE_OUTER_BOUND ( 'NONE', #73536, .T. ) ; +#46096 = ADVANCED_FACE ( 'NONE', ( #74170 ), #48453, .T. ) ; +#46097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46098 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655698900, 28.42298334620753800, -28.20555803802994500 ) ) ; +#46099 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#46100 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 80.34267608797551900, -28.20555803803014400 ) ) ; +#46101 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 22.65857157145701000, -28.20555803802995200 ) ) ; +#46102 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 40.16666666666667900, 1.741883078712356500 ) ) ; +#46103 = CARTESIAN_POINT ( 'NONE', ( 4.239894507328267000, 59.66414768974006900, -28.38420446581324100 ) ) ; +#46104 = ORIENTED_EDGE ( 'NONE', *, *, #33439, .F. ) ; +#46105 = AXIS2_PLACEMENT_3D ( 'NONE', #47193, #35012, #66009 ) ; +#46106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46107 = ORIENTED_EDGE ( 'NONE', *, *, #76678, .T. ) ; +#46108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46109 = ORIENTED_EDGE ( 'NONE', *, *, #26775, .F. ) ; +#46110 = ADVANCED_FACE ( 'NONE', ( #6011 ), #61020, .T. ) ; +#46111 = VECTOR ( 'NONE', #4025, 1000.000000000000000 ) ; +#46112 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#46113 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46114 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 71.25732391202396300, -28.20555803802997700 ) ) ; +#46115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46117 = ADVANCED_FACE ( 'NONE', ( #22560 ), #4057, .F. ) ; +#46118 = AXIS2_PLACEMENT_3D ( 'NONE', #36901, #80442, #43159 ) ; +#46119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12424, #30918, #18670, #62189 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572327102400E-007, 0.0004669842289003201300 ), + .UNSPECIFIED. ) ; +#46120 = ADVANCED_FACE ( 'NONE', ( #39068 ), #51697, .T. ) ; +#46121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46122 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#46123 = EDGE_CURVE ( 'NONE', #54555, #9399, #48708, .T. ) ; +#46124 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 2.500000000000005300, -7.061964498581022400 ) ) ; +#46125 = FACE_OUTER_BOUND ( 'NONE', #20157, .T. ) ; +#46126 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#46127 = CARTESIAN_POINT ( 'NONE', ( 2.668959489915070400, 50.81480465755353700, -28.53901988778292400 ) ) ; +#46128 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148430000, 15.00238095238089100, -28.70555803803009500 ) ) ; +#46129 = ORIENTED_EDGE ( 'NONE', *, *, #70104, .F. ) ; +#46130 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46131 = PLANE ( 'NONE', #74682 ) ; +#46132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46133 = VERTEX_POINT ( 'NONE', #42751 ) ; +#46134 = CARTESIAN_POINT ( 'NONE', ( -10.53553486380897300, 9.181517971446963200, -28.67456072961195100 ) ) ; +#46135 = ORIENTED_EDGE ( 'NONE', *, *, #19388, .T. ) ; +#46136 = FACE_OUTER_BOUND ( 'NONE', #26012, .T. ) ; +#46137 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105669000, 35.04999999999997600, -28.70555803802995200 ) ) ; +#46138 = VERTEX_POINT ( 'NONE', #80034 ) ; +#46139 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#46140 = CIRCLE ( 'NONE', #49177, 10.00000000000009400 ) ; +#46141 = EDGE_CURVE ( 'NONE', #901, #72050, #26487, .T. ) ; +#46142 = ORIENTED_EDGE ( 'NONE', *, *, #17269, .F. ) ; +#46143 = EDGE_CURVE ( 'NONE', #1054, #59892, #34296, .T. ) ; +#46144 = FACE_OUTER_BOUND ( 'NONE', #57547, .T. ) ; +#46145 = CARTESIAN_POINT ( 'NONE', ( 3.360497072202812200, 41.43250300240230600, -28.25438406275899800 ) ) ; +#46146 = CIRCLE ( 'NONE', #70018, 10.00000000000009600 ) ; +#46148 = ORIENTED_EDGE ( 'NONE', *, *, #22712, .F. ) ; +#46147 = CARTESIAN_POINT ( 'NONE', ( 3.243064933257841200, 61.43482203710632200, -28.29548531138974700 ) ) ; +#46149 = ORIENTED_EDGE ( 'NONE', *, *, #78866, .T. ) ; +#46150 = VERTEX_POINT ( 'NONE', #61556 ) ; +#46151 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455700400, 51.52472935029882700, -28.39317435246158500 ) ) ; +#46152 = EDGE_CURVE ( 'NONE', #24597, #47599, #20614, .T. ) ; +#46153 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714800, 49.85339758437810100, -28.20555803802996700 ) ) ; +#46154 = EDGE_CURVE ( 'NONE', #76613, #47427, #37129, .T. ) ; +#46155 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46157 = CONICAL_SURFACE ( 'NONE', #17980, 10.50000000000009400, 0.7853981633974500600 ) ; +#46158 = EDGE_CURVE ( 'NONE', #22393, #9523, #19832, .T. ) ; +#46159 = EDGE_LOOP ( 'NONE', ( #49736, #41764, #28833 ) ) ; +#46160 = AXIS2_PLACEMENT_3D ( 'NONE', #38430, #1189, #44664 ) ; +#46161 = FACE_OUTER_BOUND ( 'NONE', #27583, .T. ) ; +#46162 = ORIENTED_EDGE ( 'NONE', *, *, #15584, .T. ) ; +#46163 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992900, 9.418457393421045200, -28.68863412692833100 ) ) ; +#46164 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 11.83333333333334600, 9.794441961969999600 ) ) ; +#46165 = ORIENTED_EDGE ( 'NONE', *, *, #68226, .T. ) ; +#46166 = ORIENTED_EDGE ( 'NONE', *, *, #30589, .F. ) ; +#46167 = ORIENTED_EDGE ( 'NONE', *, *, #76683, .T. ) ; +#46169 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807163900, 84.79999999999998300, -28.70555803802997700 ) ) ; +#46168 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72739, #35483, #10727, #54214 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574818573500E-007, 0.0004669842289003591000 ), + .UNSPECIFIED. ) ; +#46170 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 89.63176086632793700, -28.70555803802997700 ) ) ; +#46171 = ORIENTED_EDGE ( 'NONE', *, *, #15572, .F. ) ; +#46172 = FACE_OUTER_BOUND ( 'NONE', #56167, .T. ) ; +#46173 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 46.16666666666667100, -6.205558038030004800 ) ) ; +#46174 = AXIS2_PLACEMENT_3D ( 'NONE', #28687, #34909, #65919 ) ; +#46175 = AXIS2_PLACEMENT_3D ( 'NONE', #56174, #31196, #12701 ) ; +#46176 = ORIENTED_EDGE ( 'NONE', *, *, #16254, .F. ) ; +#46177 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#46178 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432843700, 18.35339758437810400, -28.20555803802992800 ) ) ; +#46179 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46180 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 11.16666666666667500, -9.205558038030003900 ) ) ; +#46181 = VERTEX_POINT ( 'NONE', #18287 ) ; +#46182 = EDGE_LOOP ( 'NONE', ( #35233, #19269, #64982 ) ) ; +#46183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46184 = CARTESIAN_POINT ( 'NONE', ( 11.30404578338976400, 60.13716795162665100, -28.48697406221639000 ) ) ; +#46185 = EDGE_LOOP ( 'NONE', ( #72894, #76932, #38639, #26562, #60263 ) ) ; +#46186 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#46187 = CIRCLE ( 'NONE', #42377, 10.00000000000009200 ) ; +#46188 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 48.50000000000000000, 6.847000845227641200 ) ) ; +#46189 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46190 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#46191 = AXIS2_PLACEMENT_3D ( 'NONE', #34854, #59603, #41090 ) ; +#46192 = EDGE_CURVE ( 'NONE', #30036, #67308, #70222, .T. ) ; +#46193 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#46194 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 28.85339758437810400, -28.20555803802994200 ) ) ; +#46195 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46196 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654641400, 61.32559822014175000, -28.29986836858011400 ) ) ; +#46197 = CIRCLE ( 'NONE', #8446, 9.500000000000099500 ) ; +#46198 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823701300, 31.90456253568396500, -28.61277292027075700 ) ) ; +#46199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46200 = EDGE_CURVE ( 'NONE', #18573, #25034, #5365, .T. ) ; +#46201 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46202 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715200, 20.24660241562189000, -28.20555803802994200 ) ) ; +#46203 = AXIS2_PLACEMENT_3D ( 'NONE', #33953, #77203, #77465 ) ; +#46204 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#46205 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46207 = EDGE_LOOP ( 'NONE', ( #15784, #5067, #47558, #69334 ) ) ; +#46206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46208 = ADVANCED_FACE ( 'NONE', ( #18656 ), #142, .F. ) ; +#46209 = CIRCLE ( 'NONE', #6697, 10.50000000000009600 ) ; +#46210 = CARTESIAN_POINT ( 'NONE', ( 5.148153789003716300, 75.79999999999965600, -28.37148172714602300 ) ) ; +#46211 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528182800, 28.63131911501876900, -28.51286550264508100 ) ) ; +#46212 = ORIENTED_EDGE ( 'NONE', *, *, #23732, .T. ) ; +#46213 = ADVANCED_FACE ( 'NONE', ( #66356 ), #47810, .T. ) ; +#46214 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 11.70037755566824200, -28.53664883431606500 ) ) ; +#46215 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999953500, 61.43250300240195800, -28.20555803803014400 ) ) ; +#46216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46217 = FACE_OUTER_BOUND ( 'NONE', #55392, .T. ) ; +#46218 = AXIS2_PLACEMENT_3D ( 'NONE', #78445, #41158, #3885 ) ; +#46219 = CONICAL_SURFACE ( 'NONE', #12171, 10.00000000000009400, 0.7853981633974447300 ) ; +#46220 = EDGE_LOOP ( 'NONE', ( #79679, #37759, #42043, #15094 ) ) ; +#46221 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 52.00000000000001400, -1.205558038030005300 ) ) ; +#46222 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#46223 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64600, #21070, #77076, #39813 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799619383900E-007, 0.0005050252131287071600 ), + .UNSPECIFIED. ) ; +#46224 = CONICAL_SURFACE ( 'NONE', #42176, 10.00000000000009600, 0.7853981633974482800 ) ; +#46225 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656722600, 49.85339758437807900, -28.20555803802996700 ) ) ; +#46226 = EDGE_LOOP ( 'NONE', ( #50869, #71156, #21064 ) ) ; +#46227 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49530, #68332, #31099, #74606 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.496346469501911600E-005, 0.0007303749718167648600 ), + .UNSPECIFIED. ) ; +#46228 = ORIENTED_EDGE ( 'NONE', *, *, #69862, .T. ) ; +#46229 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471817200, 18.13131911501876200, -28.51286550264506700 ) ) ; +#46230 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 45.00000000000001400, 6.794441961969995200 ) ) ; +#46231 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46233 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46234 = ADVANCED_FACE ( 'NONE', ( #33244 ), #14749, .T. ) ; +#46235 = CIRCLE ( 'NONE', #51400, 10.00000000000009400 ) ; +#46236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3975, #16506, #22752, #66288 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131287083500 ), + .UNSPECIFIED. ) ; +#46237 = FACE_OUTER_BOUND ( 'NONE', #22907, .T. ) ; +#46238 = ORIENTED_EDGE ( 'NONE', *, *, #42941, .T. ) ; +#46239 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 47.00000000000001400, -9.205558038030005700 ) ) ; +#46240 = ORIENTED_EDGE ( 'NONE', *, *, #21282, .T. ) ; +#46241 = ORIENTED_EDGE ( 'NONE', *, *, #31884, .T. ) ; +#46242 = ORIENTED_EDGE ( 'NONE', *, *, #64074, .F. ) ; +#46243 = ORIENTED_EDGE ( 'NONE', *, *, #77649, .F. ) ; +#46244 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 17.16666666666667100, -3.349151577478988200 ) ) ; +#46245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46246 = CIRCLE ( 'NONE', #44750, 10.50000000000009600 ) ; +#46247 = ORIENTED_EDGE ( 'NONE', *, *, #9484, .T. ) ; +#46248 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46348, #2863, #58898, #21664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799598355200E-007, 0.0005050252131287522600 ), + .UNSPECIFIED. ) ; +#46249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46250 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46251 = FACE_OUTER_BOUND ( 'NONE', #17557, .T. ) ; +#46252 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811158500, 74.54539096019117000, -28.69802137271993600 ) ) ; +#46253 = ORIENTED_EDGE ( 'NONE', *, *, #58458, .F. ) ; +#46254 = CONICAL_SURFACE ( 'NONE', #9507, 10.50000000000009600, 0.7853981633974518300 ) ; +#46255 = EDGE_CURVE ( 'NONE', #53823, #49578, #16709, .T. ) ; +#46256 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46258 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7039, #44004, #56831, #19567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349237213700E-007, 0.0004318366892326690400 ), + .UNSPECIFIED. ) ; +#46259 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305506800, 71.89604671418345600, -28.70555803803002000 ) ) ; +#46260 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 60.66666666666667100, 5.722645192245505700 ) ) ; +#46261 = EDGE_CURVE ( 'NONE', #22837, #37916, #31310, .T. ) ; +#46262 = AXIS2_PLACEMENT_3D ( 'NONE', #68253, #31013, #74523 ) ; +#46263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46264 = CONICAL_SURFACE ( 'NONE', #31370, 10.50000000000009600, 0.7853981633974500600 ) ; +#46265 = FACE_OUTER_BOUND ( 'NONE', #18413, .T. ) ; +#46266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46267 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671064200, 79.66414768973950800, -28.38420446581351800 ) ) ; +#46268 = CARTESIAN_POINT ( 'NONE', ( 10.28450904071136700, 92.73594724051950800, -28.65532419784739200 ) ) ; +#46269 = ORIENTED_EDGE ( 'NONE', *, *, #31197, .T. ) ; +#46270 = CIRCLE ( 'NONE', #15536, 10.00000000000009400 ) ; +#46271 = AXIS2_PLACEMENT_3D ( 'NONE', #16959, #60481, #23202 ) ; +#46272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46273 = VERTEX_POINT ( 'NONE', #25078 ) ; +#46274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46275 = EDGE_CURVE ( 'NONE', #23353, #13352, #68284, .T. ) ; +#46276 = EDGE_CURVE ( 'NONE', #44409, #38925, #2082, .T. ) ; +#46277 = ADVANCED_FACE ( 'NONE', ( #45852 ), #564, .T. ) ; +#46278 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46279 = AXIS2_PLACEMENT_3D ( 'NONE', #34261, #65316, #3228 ) ; +#46280 = FACE_OUTER_BOUND ( 'NONE', #74253, .T. ) ; +#46281 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528131300, 20.46868088498121800, -28.51286550264510200 ) ) ; +#46282 = FACE_OUTER_BOUND ( 'NONE', #4035, .T. ) ; +#46283 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 23.00000000000000400, -6.205558038030003100 ) ) ; +#46284 = EDGE_LOOP ( 'NONE', ( #74025, #29065, #12808, #19887, #62454 ) ) ; +#46285 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46286 = CONICAL_SURFACE ( 'NONE', #46825, 10.50000000000009200, 0.7853981633974482800 ) ; +#46287 = CARTESIAN_POINT ( 'NONE', ( 17.12369736223625300, 69.83407839971525300, -28.37510699173782000 ) ) ; +#46288 = AXIS2_PLACEMENT_3D ( 'NONE', #1578, #45055, #7826 ) ; +#46289 = EDGE_LOOP ( 'NONE', ( #57720, #33894, #38429 ) ) ; +#46290 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489654800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#46291 = EDGE_CURVE ( 'NONE', #12957, #22814, #71691, .T. ) ; +#46292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46294 = ORIENTED_EDGE ( 'NONE', *, *, #73983, .T. ) ; +#46293 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#46295 = ADVANCED_FACE ( 'NONE', ( #62449 ), #43903, .T. ) ; +#46296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46297 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46298 = AXIS2_PLACEMENT_3D ( 'NONE', #14347, #57861, #20612 ) ; +#46299 = AXIS2_PLACEMENT_3D ( 'NONE', #59743, #22463, #65993 ) ; +#46300 = CIRCLE ( 'NONE', #31102, 10.50000000000009600 ) ; +#46301 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873285300, 79.89196326503807200, -28.29033182162403300 ) ) ; +#46302 = CONICAL_SURFACE ( 'NONE', #10602, 10.00000000000009200, 0.7853981633974447300 ) ; +#46303 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 15.92318720225497600, -28.70555803802992800 ) ) ; +#46304 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46305 = ORIENTED_EDGE ( 'NONE', *, *, #44302, .T. ) ; +#46306 = ORIENTED_EDGE ( 'NONE', *, *, #40945, .F. ) ; +#46307 = ORIENTED_EDGE ( 'NONE', *, *, #27515, .F. ) ; +#46308 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686868000, 61.58005252438383100, -28.24986299608865200 ) ) ; +#46309 = AXIS2_PLACEMENT_3D ( 'NONE', #77591, #40312, #3046 ) ; +#46310 = VERTEX_POINT ( 'NONE', #13392 ) ; +#46311 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46312 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#46313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46314 = CONICAL_SURFACE ( 'NONE', #42752, 10.00000000000009600, 0.7853981633974482800 ) ; +#46315 = CIRCLE ( 'NONE', #69187, 9.500000000000131500 ) ; +#46316 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 80.13716795162648100, -28.48697406221665300 ) ) ; +#46317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46318 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46319 = ORIENTED_EDGE ( 'NONE', *, *, #63780, .T. ) ; +#46320 = ORIENTED_EDGE ( 'NONE', *, *, #78968, .F. ) ; +#46321 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#46322 = ADVANCED_FACE ( 'NONE', ( #49752 ), #10859, .F. ) ; +#46323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5648, #61704, #80452, #43164 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849860700, 0.0007596411030278630700 ), + .UNSPECIFIED. ) ; +#46324 = CONICAL_SURFACE ( 'NONE', #5468, 10.50000000000009600, 0.7853981633974482800 ) ; +#46325 = AXIS2_PLACEMENT_3D ( 'NONE', #12460, #55954, #18706 ) ; +#46326 = VERTEX_POINT ( 'NONE', #19624 ) ; +#46327 = ORIENTED_EDGE ( 'NONE', *, *, #23360, .T. ) ; +#46328 = FACE_OUTER_BOUND ( 'NONE', #44334, .T. ) ; +#46329 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455915300, 80.07527064970105400, -28.39317435246135100 ) ) ; +#46330 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 66.66666666666670000, -5.205558038030003100 ) ) ; +#46331 = AXIS2_PLACEMENT_3D ( 'NONE', #75905, #1370, #44580 ) ; +#46332 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9231, #52766, #28062, #71547 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716367600, 0.004080294652941822100 ), + .UNSPECIFIED. ) ; +#46333 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#46334 = EDGE_LOOP ( 'NONE', ( #1631, #70862, #26670 ) ) ; +#46335 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 39.37705528805139500, -28.20555803802995200 ) ) ; +#46336 = EDGE_CURVE ( 'NONE', #18573, #9360, #27423, .T. ) ; +#46337 = AXIS2_PLACEMENT_3D ( 'NONE', #21333, #64862, #27593 ) ; +#46338 = CONICAL_SURFACE ( 'NONE', #27681, 10.50000000000009600, 0.7853981633974500600 ) ; +#46339 = ORIENTED_EDGE ( 'NONE', *, *, #58421, .T. ) ; +#46340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46341 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46342 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56257, #12782, #62540, #25280 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.330737450703139900E-018, 0.001246264537621150300 ), + .UNSPECIFIED. ) ; +#46343 = FACE_OUTER_BOUND ( 'NONE', #56796, .T. ) ; +#46344 = VERTEX_POINT ( 'NONE', #38352 ) ; +#46345 = ORIENTED_EDGE ( 'NONE', *, *, #40587, .F. ) ; +#46346 = CONICAL_SURFACE ( 'NONE', #55069, 10.00000000000009400, 0.7853981633974447300 ) ; +#46347 = EDGE_LOOP ( 'NONE', ( #23781, #80510, #43367, #79236 ) ) ; +#46348 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#46349 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58719, #15207, #21488, #65009 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671402604500E-007, 0.0007670610367941734800 ), + .UNSPECIFIED. ) ; +#46350 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410180800, 51.13951010012875300, -28.36889022317251700 ) ) ; +#46351 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000456500, 90.34510448120788300, -28.37193179497707600 ) ) ; +#46352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46353 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 38.00000000000000700, -1.205558038030002800 ) ) ; +#46354 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 53.65857157145681800, -28.20555803803047800 ) ) ; +#46355 = CIRCLE ( 'NONE', #55127, 10.50000000000009600 ) ; +#46356 = CONICAL_SURFACE ( 'NONE', #68873, 10.50000000000009600, 0.7853981633974500600 ) ; +#46358 = EDGE_CURVE ( 'NONE', #31625, #52332, #57213, .T. ) ; +#46357 = ORIENTED_EDGE ( 'NONE', *, *, #46719, .T. ) ; +#46359 = EDGE_CURVE ( 'NONE', #3823, #70930, #42736, .T. ) ; +#46360 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175100, 71.13951010012876000, -28.36889022317246400 ) ) ; +#46361 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 51.07757630314203800, -28.53861367218593500 ) ) ; +#46362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46364 = ORIENTED_EDGE ( 'NONE', *, *, #37354, .F. ) ; +#46365 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#46366 = EDGE_CURVE ( 'NONE', #56250, #56481, #77024, .T. ) ; +#46367 = ADVANCED_FACE ( 'NONE', ( #12818 ), #41979, .T. ) ; +#46368 = CARTESIAN_POINT ( 'NONE', ( 5.100117264795682300, 35.05000000000000400, -28.53808257741933800 ) ) ; +#46369 = EDGE_CURVE ( 'NONE', #54546, #50469, #58532, .T. ) ; +#46370 = CARTESIAN_POINT ( 'NONE', ( 17.24313022136390200, 9.107924084365789600, -28.45072960819748400 ) ) ; +#46371 = CIRCLE ( 'NONE', #27779, 9.500000000000101300 ) ; +#46372 = AXIS2_PLACEMENT_3D ( 'NONE', #878, #7134, #50641 ) ; +#46373 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 80.16349705304865800, -28.30782889147482400 ) ) ; +#46374 = ORIENTED_EDGE ( 'NONE', *, *, #50308, .T. ) ; +#46375 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#46376 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 0.3333333333333382600, 2.794441961969998300 ) ) ; +#46377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46378 = VERTEX_POINT ( 'NONE', #63699 ) ; +#46379 = EDGE_LOOP ( 'NONE', ( #23075, #67270, #11598, #29759, #77722, #20592 ) ) ; +#46380 = VERTEX_POINT ( 'NONE', #38879 ) ; +#46381 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 30.96868088498122200, -28.51286550264512000 ) ) ; +#46382 = CIRCLE ( 'NONE', #18235, 10.00000000000009200 ) ; +#46383 = CARTESIAN_POINT ( 'NONE', ( -9.373691282604687200, 92.65850107289600100, -28.66333578723704200 ) ) ; +#46384 = ADVANCED_FACE ( 'NONE', ( #60513 ), #40035, .F. ) ; +#46385 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571446600, 10.02858243452106100, -28.70555803802994200 ) ) ; +#46387 = EDGE_LOOP ( 'NONE', ( #54869, #65373, #12485 ) ) ; +#46386 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#46388 = AXIS2_PLACEMENT_3D ( 'NONE', #40603, #9606, #77885 ) ; +#46389 = EDGE_LOOP ( 'NONE', ( #65150, #36578, #16099, #981 ) ) ; +#46390 = EDGE_CURVE ( 'NONE', #50311, #67971, #28350, .T. ) ; +#46391 = EDGE_CURVE ( 'NONE', #280, #3819, #75087, .T. ) ; +#46392 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63424, #26164, #7616, #51099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917674400800E-007, 0.0004089036991175628400 ), + .UNSPECIFIED. ) ; +#46393 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46394 = EDGE_CURVE ( 'NONE', #6237, #59504, #25460, .T. ) ; +#46395 = CARTESIAN_POINT ( 'NONE', ( 15.46693852783924900, 85.79999999999984100, -28.37297418064025200 ) ) ; +#46396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46397 = VERTEX_POINT ( 'NONE', #57684 ) ; +#46398 = FACE_OUTER_BOUND ( 'NONE', #26373, .T. ) ; +#46399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46400 = EDGE_LOOP ( 'NONE', ( #59480, #71614, #35065, #55410 ) ) ; +#46401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46402 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#46403 = AXIS2_PLACEMENT_3D ( 'NONE', #36275, #42515, #67295 ) ; +#46404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46405 = ORIENTED_EDGE ( 'NONE', *, *, #23691, .F. ) ; +#46406 = ADVANCED_FACE ( 'NONE', ( #73149 ), #54629, .F. ) ; +#46407 = ORIENTED_EDGE ( 'NONE', *, *, #51637, .F. ) ; +#46408 = CIRCLE ( 'NONE', #43802, 10.50000000000009600 ) ; +#46409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46410 = CONICAL_SURFACE ( 'NONE', #53772, 10.50000000000009800, 0.7853981633974518300 ) ; +#46411 = EDGE_CURVE ( 'NONE', #62561, #17583, #13856, .T. ) ; +#46412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46413 = AXIS2_PLACEMENT_3D ( 'NONE', #30678, #74203, #36896 ) ; +#46414 = AXIS2_PLACEMENT_3D ( 'NONE', #21412, #33897, #77415 ) ; +#46415 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46416 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46417 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719609400, 77.94142842854245100, -28.37229765499316900 ) ) ; +#46418 = CARTESIAN_POINT ( 'NONE', ( -15.99167745881034400, 85.79999999999998300, -28.49360982173995500 ) ) ; +#46419 = ORIENTED_EDGE ( 'NONE', *, *, #34542, .T. ) ; +#46420 = ADVANCED_FACE ( 'NONE', ( #8859 ), #21560, .T. ) ; +#46421 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46422 = CONICAL_SURFACE ( 'NONE', #28181, 10.50000000000009600, 0.7853981633974500600 ) ; +#46424 = VERTEX_POINT ( 'NONE', #58210 ) ; +#46423 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46425 = CARTESIAN_POINT ( 'NONE', ( 2.279233496941978300, 90.09951448976247000, -28.63282631410044100 ) ) ; +#46426 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 9.666666666666687400, -10.73183747965883100 ) ) ; +#46427 = CARTESIAN_POINT ( 'NONE', ( -12.68596550977831300, 45.54999999999998300, -28.37321477197630800 ) ) ; +#46428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46429 = ADVANCED_FACE ( 'NONE', ( #4990 ), #69230, .T. ) ; +#46430 = CONICAL_SURFACE ( 'NONE', #34729, 10.00000000000009200, 0.7853981633974447300 ) ; +#46431 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 44.00000000000000700, 3.794441961969998300 ) ) ; +#46432 = AXIS2_PLACEMENT_3D ( 'NONE', #48006, #17055, #4254 ) ; +#46434 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46433 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74183, #30657, #12151, #55644 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736051876800E-007, 0.0006649316450232021800 ), + .UNSPECIFIED. ) ; +#46435 = EDGE_LOOP ( 'NONE', ( #11806, #45439, #31696, #48139 ) ) ; +#46436 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46437 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 9.000000000000007100, 6.794441961969995200 ) ) ; +#46438 = AXIS2_PLACEMENT_3D ( 'NONE', #53311, #16338, #59863 ) ; +#46439 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540382500, 69.08026449164326300, -28.70555803803019800 ) ) ; +#46440 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 51.25732391202397800, -28.20555803802997700 ) ) ; +#46441 = FACE_OUTER_BOUND ( 'NONE', #20844, .T. ) ; +#46442 = ORIENTED_EDGE ( 'NONE', *, *, #12138, .F. ) ; +#46443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46444 = EDGE_CURVE ( 'NONE', #66196, #73958, #80155, .T. ) ; +#46445 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 46.33333333333334300, -10.73183747965883100 ) ) ; +#46446 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29086, #72566, #47768, #10541 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.074601341183654000E-006, 0.002338770195357540500 ), + .UNSPECIFIED. ) ; +#46447 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495029600, 38.69228657120672200, -28.53891855579990600 ) ) ; +#46448 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 78.16545993132803000, -28.70555803803024400 ) ) ; +#46449 = ORIENTED_EDGE ( 'NONE', *, *, #47116, .T. ) ; +#46450 = AXIS2_PLACEMENT_3D ( 'NONE', #14259, #57771, #20516 ) ; +#46451 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743486400, 43.66464174796073600, -28.53896444442202100 ) ) ; +#46452 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349245500, 50.20543520232829600, -28.70555803802996700 ) ) ; +#46453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46454 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 83.89610994602600200, -28.37519436813181500 ) ) ; +#46455 = FACE_OUTER_BOUND ( 'NONE', #34976, .T. ) ; +#46456 = FACE_OUTER_BOUND ( 'NONE', #61993, .T. ) ; +#46457 = VERTEX_POINT ( 'NONE', #52192 ) ; +#46458 = ORIENTED_EDGE ( 'NONE', *, *, #14014, .T. ) ; +#46459 = AXIS2_PLACEMENT_3D ( 'NONE', #50594, #56890, #19633 ) ; +#46460 = CARTESIAN_POINT ( 'NONE', ( 11.00202449666868500, 18.28907889423186700, -28.25433304472417400 ) ) ; +#46461 = ORIENTED_EDGE ( 'NONE', *, *, #46291, .T. ) ; +#46462 = EDGE_LOOP ( 'NONE', ( #5992, #48313, #19831, #68122, #49524, #6562, #9437 ) ) ; +#46463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46464 = PLANE ( 'NONE', #25064 ) ; +#46465 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580931600, 37.86736912940426000, -28.67620115463453000 ) ) ; +#46466 = EDGE_LOOP ( 'NONE', ( #71745, #33462, #57109 ) ) ; +#46467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46468 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#46469 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46470 = ORIENTED_EDGE ( 'NONE', *, *, #36537, .T. ) ; +#46471 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466779800, 49.30869142985021400, -28.37223374938534100 ) ) ; +#46472 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973386500, 54.26498457889726300, -28.70555803803001600 ) ) ; +#46473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46474 = FACE_OUTER_BOUND ( 'NONE', #2284, .T. ) ; +#46475 = ORIENTED_EDGE ( 'NONE', *, *, #32963, .F. ) ; +#46476 = EDGE_CURVE ( 'NONE', #21857, #32703, #65709, .T. ) ; +#46477 = ORIENTED_EDGE ( 'NONE', *, *, #35154, .F. ) ; +#46478 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 49.83333333333335000, 0.9380355014189731800 ) ) ; +#46479 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#46480 = ORIENTED_EDGE ( 'NONE', *, *, #46411, .F. ) ; +#46481 = EDGE_CURVE ( 'NONE', #40802, #25034, #51166, .T. ) ; +#46482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46483 = FACE_OUTER_BOUND ( 'NONE', #38900, .T. ) ; +#46484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46485 = ADVANCED_FACE ( 'NONE', ( #71175 ), #36147, .T. ) ; +#46486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46487 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46488 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 70.13716795162658000, -28.48697406221668500 ) ) ; +#46489 = EDGE_CURVE ( 'NONE', #63652, #42204, #36752, .T. ) ; +#46490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46491 = ORIENTED_EDGE ( 'NONE', *, *, #2760, .T. ) ; +#46492 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44764, #1285, #51026, #13829 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259841801200E-007, 0.0004559721492002251600 ), + .UNSPECIFIED. ) ; +#46493 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883571900, 41.39435118792235400, -28.41114655922302400 ) ) ; +#46494 = EDGE_CURVE ( 'NONE', #39898, #50513, #22315, .T. ) ; +#46495 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448994900, 49.16666666666667900, 6.794441961969994300 ) ) ; +#46496 = EDGE_CURVE ( 'NONE', #54616, #64964, #7823, .T. ) ; +#46497 = CIRCLE ( 'NONE', #45251, 10.50000000000009600 ) ; +#46498 = ORIENTED_EDGE ( 'NONE', *, *, #36536, .T. ) ; +#46499 = ADVANCED_FACE ( 'NONE', ( #6937 ), #3019, .T. ) ; +#46500 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988500, 50.19949493661175700, -28.70555803802996700 ) ) ; +#46501 = EDGE_LOOP ( 'NONE', ( #68160, #5529, #3875 ) ) ; +#46502 = CARTESIAN_POINT ( 'NONE', ( -12.92225278929814400, 65.79999999999996900, -28.70555803802997700 ) ) ; +#46503 = EDGE_LOOP ( 'NONE', ( #78623, #40311, #63999, #42273 ) ) ; +#46504 = ADVANCED_FACE ( 'NONE', ( #52659 ), #50700, .T. ) ; +#46505 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 15.00000000000000900, -1.205558038030005300 ) ) ; +#46506 = CARTESIAN_POINT ( 'NONE', ( 19.04221839912415600, 93.62046355070448600, -27.85628954055085400 ) ) ; +#46507 = AXIS2_PLACEMENT_3D ( 'NONE', #45488, #33028, #14540 ) ; +#46508 = EDGE_CURVE ( 'NONE', #19952, #26040, #67286, .T. ) ; +#46509 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.418457393421038000, -28.68863412692833800 ) ) ; +#46510 = EDGE_CURVE ( 'NONE', #66578, #66852, #74197, .T. ) ; +#46511 = EDGE_CURVE ( 'NONE', #51153, #65127, #59723, .T. ) ; +#46512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46513 = ADVANCED_FACE ( 'NONE', ( #38052 ), #1072, .F. ) ; +#46514 = AXIS2_PLACEMENT_3D ( 'NONE', #17604, #55103, #5347 ) ; +#46515 = CIRCLE ( 'NONE', #68723, 10.00000000000009400 ) ; +#46516 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46517 = VERTEX_POINT ( 'NONE', #11716 ) ; +#46518 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30124, #61404, #80129, #42860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213713669000E-007, 0.0008724366121415413200 ), + .UNSPECIFIED. ) ; +#46519 = VERTEX_POINT ( 'NONE', #55199 ) ; +#46520 = AXIS2_PLACEMENT_3D ( 'NONE', #70777, #33515, #77037 ) ; +#46521 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 18.33333333333333900, -3.705558038030004400 ) ) ; +#46522 = AXIS2_PLACEMENT_3D ( 'NONE', #40450, #59511, #22234 ) ; +#46523 = CARTESIAN_POINT ( 'NONE', ( 2.487278546916769500, 71.47860033657568100, -28.56001054660912800 ) ) ; +#46524 = AXIS2_PLACEMENT_3D ( 'NONE', #68380, #31136, #74644 ) ; +#46525 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 61.82440674572816200, -28.45987523529581900 ) ) ; +#46526 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 58.49999999999999300, -7.061964498581022400 ) ) ; +#46527 = FACE_OUTER_BOUND ( 'NONE', #745, .T. ) ; +#46528 = CIRCLE ( 'NONE', #13607, 10.50000000000009600 ) ; +#46529 = ORIENTED_EDGE ( 'NONE', *, *, #30353, .F. ) ; +#46530 = ORIENTED_EDGE ( 'NONE', *, *, #1497, .T. ) ; +#46531 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#46532 = ORIENTED_EDGE ( 'NONE', *, *, #4467, .F. ) ; +#46533 = CIRCLE ( 'NONE', #52240, 10.50000000000009600 ) ; +#46534 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46535 = ORIENTED_EDGE ( 'NONE', *, *, #24259, .T. ) ; +#46536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24910, #68685, #43892, #6657 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694470964800E-007, 0.0008724363063894245500 ), + .UNSPECIFIED. ) ; +#46537 = ORIENTED_EDGE ( 'NONE', *, *, #29913, .F. ) ; +#46538 = ORIENTED_EDGE ( 'NONE', *, *, #36649, .T. ) ; +#46539 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 32.47376207875059600, -28.70555803802996700 ) ) ; +#46540 = ORIENTED_EDGE ( 'NONE', *, *, #61199, .T. ) ; +#46541 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#46542 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811647600, 39.20564881207762700, -28.41114655922298800 ) ) ; +#46543 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164800, 70.90033558196070400, -28.70555803803030800 ) ) ; +#46544 = AXIS2_PLACEMENT_3D ( 'NONE', #27903, #34126, #40094 ) ; +#46545 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 70.37705528805044300, -28.20555803803047800 ) ) ; +#46546 = ORIENTED_EDGE ( 'NONE', *, *, #5814, .T. ) ; +#46547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46548 = ORIENTED_EDGE ( 'NONE', *, *, #38496, .T. ) ; +#46549 = FACE_OUTER_BOUND ( 'NONE', #50679, .T. ) ; +#46550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46551 = ORIENTED_EDGE ( 'NONE', *, *, #37355, .F. ) ; +#46552 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 20.83333333333333600, 3.794441961969996900 ) ) ; +#46553 = VERTEX_POINT ( 'NONE', #17959 ) ; +#46554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46556 = ORIENTED_EDGE ( 'NONE', *, *, #25220, .F. ) ; +#46557 = EDGE_CURVE ( 'NONE', #31113, #32608, #45185, .T. ) ; +#46558 = ORIENTED_EDGE ( 'NONE', *, *, #31127, .T. ) ; +#46559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46560 = ORIENTED_EDGE ( 'NONE', *, *, #70601, .F. ) ; +#46561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46562 = AXIS2_PLACEMENT_3D ( 'NONE', #20184, #63717, #26458 ) ; +#46563 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153706400, 50.79999999999999000, -28.55171188418377400 ) ) ; +#46564 = CIRCLE ( 'NONE', #72971, 10.50000000000009200 ) ; +#46565 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310477800, 41.49769010897086500, -28.61774594594330900 ) ) ; +#46566 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510361600, 28.65930907398620100, -28.35186440610856500 ) ) ; +#46567 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46568 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469300, 14.05000000000000600, -28.20555803802992800 ) ) ; +#46569 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769027500, 40.81139552890385900, -28.53900456328628000 ) ) ; +#46570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46571 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000048000, 18.36203212531224300, -28.38801640354843800 ) ) ; +#46572 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000000, 48.12623792124937700, -28.70555803802996700 ) ) ; +#46573 = ORIENTED_EDGE ( 'NONE', *, *, #17759, .F. ) ; +#46574 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31962, #69216, #50687, #13484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002063080595560022400 ), + .UNSPECIFIED. ) ; +#46575 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 69.63176086632792300, -28.70555803802997700 ) ) ; +#46576 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46577 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000020400, 51.25489551879273600, -28.37193179497631900 ) ) ; +#46578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46579 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#46580 = AXIS2_PLACEMENT_3D ( 'NONE', #64671, #27406, #70891 ) ; +#46581 = CARTESIAN_POINT ( 'NONE', ( 16.97751078472814600, 93.28902916813530100, -28.48383786585482700 ) ) ; +#46582 = CIRCLE ( 'NONE', #66634, 10.00000000000009600 ) ; +#46583 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .F. ) ; +#46584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46585 = ORIENTED_EDGE ( 'NONE', *, *, #60536, .T. ) ; +#46586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46587 = EDGE_LOOP ( 'NONE', ( #45398, #23578, #35106, #53193 ) ) ; +#46588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46589 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 79.28967419478900100, -28.59353418718932400 ) ) ; +#46590 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567180300, 9.746602415621831400, -28.20555803802992800 ) ) ; +#46591 = AXIS2_PLACEMENT_3D ( 'NONE', #77044, #2493, #33520 ) ; +#46592 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830880600, 49.45045548864060000, -28.33400579219035400 ) ) ; +#46593 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46594 = EDGE_CURVE ( 'NONE', #21452, #22293, #65370, .T. ) ; +#46595 = CIRCLE ( 'NONE', #77548, 9.500000000000099500 ) ; +#46596 = CONICAL_SURFACE ( 'NONE', #934, 10.00000000000009600, 0.7853981633974447300 ) ; +#46597 = EDGE_LOOP ( 'NONE', ( #406, #44562, #23592, #55863 ) ) ; +#46598 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466623300, 18.83106028708477500, -28.57333386111661300 ) ) ; +#46599 = ORIENTED_EDGE ( 'NONE', *, *, #1775, .F. ) ; +#46600 = ADVANCED_FACE ( 'NONE', ( #29396 ), #32235, .T. ) ; +#46601 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 64.50000000000001400, 4.650848422521012700 ) ) ; +#46602 = ORIENTED_EDGE ( 'NONE', *, *, #63724, .T. ) ; +#46603 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#46604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#46606 = ADVANCED_FACE ( 'NONE', ( #34187 ), #79934, .F. ) ; +#46607 = CIRCLE ( 'NONE', #54519, 9.500000000000095900 ) ; +#46608 = ORIENTED_EDGE ( 'NONE', *, *, #9959, .F. ) ; +#46609 = CARTESIAN_POINT ( 'NONE', ( -2.806444223050047200E-014, 15.46443389862717400, -28.54207364681940700 ) ) ; +#46610 = FACE_OUTER_BOUND ( 'NONE', #58807, .T. ) ; +#46611 = ORIENTED_EDGE ( 'NONE', *, *, #78880, .F. ) ; +#46613 = EDGE_CURVE ( 'NONE', #79988, #12694, #23505, .T. ) ; +#46612 = ORIENTED_EDGE ( 'NONE', *, *, #54663, .T. ) ; +#46614 = EDGE_CURVE ( 'NONE', #47225, #48987, #15689, .T. ) ; +#46615 = ORIENTED_EDGE ( 'NONE', *, *, #74110, .T. ) ; +#46616 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46617 = CONICAL_SURFACE ( 'NONE', #40232, 10.00000000000009200, 0.7853981633974415100 ) ; +#46618 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46619 = ORIENTED_EDGE ( 'NONE', *, *, #8855, .F. ) ; +#46620 = ORIENTED_EDGE ( 'NONE', *, *, #38653, .T. ) ; +#46621 = ORIENTED_EDGE ( 'NONE', *, *, #62938, .T. ) ; +#46622 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61584, #55289, #11808, #67826 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859997136400E-007, 0.0008759659331881954800 ), + .UNSPECIFIED. ) ; +#46623 = ORIENTED_EDGE ( 'NONE', *, *, #67504, .F. ) ; +#46624 = EDGE_LOOP ( 'NONE', ( #24682, #25464, #51364, #8902 ) ) ; +#46625 = CARTESIAN_POINT ( 'NONE', ( -1.851846210996834100, 65.79999999999982700, -28.37148172714633500 ) ) ; +#46626 = ORIENTED_EDGE ( 'NONE', *, *, #59375, .F. ) ; +#46627 = AXIS2_PLACEMENT_3D ( 'NONE', #54786, #73310, #61075 ) ; +#46628 = VERTEX_POINT ( 'NONE', #49456 ) ; +#46629 = EDGE_CURVE ( 'NONE', #16630, #55934, #17656, .T. ) ; +#46630 = EDGE_CURVE ( 'NONE', #36688, #1821, #30800, .T. ) ; +#46631 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922494300, 60.09037803491505500, -28.29483400905898400 ) ) ; +#46632 = EDGE_CURVE ( 'NONE', #52422, #80546, #16340, .T. ) ; +#46633 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#46634 = ADVANCED_FACE ( 'NONE', ( #19590 ), #77969, .T. ) ; +#46635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46636 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46638 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 35.83333333333334300, -4.152999154772353500 ) ) ; +#46639 = EDGE_CURVE ( 'NONE', #28848, #49135, #1828, .T. ) ; +#46640 = CIRCLE ( 'NONE', #45306, 9.500000000000097700 ) ; +#46641 = AXIS2_PLACEMENT_3D ( 'NONE', #35390, #78904, #41604 ) ; +#46643 = ORIENTED_EDGE ( 'NONE', *, *, #67156, .T. ) ; +#46642 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 88.17143691309409800, -28.36981695106780800 ) ) ; +#46644 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919795100, 18.37705528805047100, -28.20555803803042500 ) ) ; +#46645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46646 = ORIENTED_EDGE ( 'NONE', *, *, #63814, .F. ) ; +#46647 = ORIENTED_EDGE ( 'NONE', *, *, #52700, .F. ) ; +#46648 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.43250300240229200, -28.20555803802997700 ) ) ; +#46649 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925449600, 17.31967837323392000, -28.55467576046967800 ) ) ; +#46650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46652 = CIRCLE ( 'NONE', #59846, 10.50000000000009600 ) ; +#46653 = AXIS2_PLACEMENT_3D ( 'NONE', #42356, #5106, #48597 ) ; +#46654 = VERTEX_POINT ( 'NONE', #56266 ) ; +#46655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46656 = AXIS2_PLACEMENT_3D ( 'NONE', #10557, #47779, #23073 ) ; +#46657 = VERTEX_POINT ( 'NONE', #75056 ) ; +#46658 = CARTESIAN_POINT ( 'NONE', ( 15.84520696236543800, 92.02260348119152400, -28.70555803803001300 ) ) ; +#46659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46660 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46661 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46662 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -1.833333333333314600, -3.349151577478988200 ) ) ; +#46663 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46664 = FACE_OUTER_BOUND ( 'NONE', #825, .T. ) ; +#46665 = EDGE_LOOP ( 'NONE', ( #1756, #40064, #68063 ) ) ; +#46666 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195768700, 17.00972971738969600, -28.70555803803005900 ) ) ; +#46667 = VERTEX_POINT ( 'NONE', #37760 ) ; +#46668 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284931400, 30.82033471810043700, -28.30868034705251200 ) ) ; +#46669 = AXIS2_PLACEMENT_3D ( 'NONE', #32666, #76177, #38889 ) ; +#46670 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290103200, 39.06267502090533100, -28.41043597897454400 ) ) ; +#46671 = EDGE_CURVE ( 'NONE', #14453, #15059, #48746, .T. ) ; +#46672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46673 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69860, #32601, #7835, #51325 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764789991238400E-007, 0.0009376791149928365100 ), + .UNSPECIFIED. ) ; +#46675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46676 = CARTESIAN_POINT ( 'NONE', ( 17.26470821603530900, 31.28298664431370600, -28.44647976475484100 ) ) ; +#46677 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46678 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925630300, 38.31967837323414000, -28.55467576046956800 ) ) ; +#46679 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274709400, 45.54999999999999700, -28.20555803802996700 ) ) ; +#46680 = FACE_OUTER_BOUND ( 'NONE', #4914, .T. ) ; +#46682 = EDGE_CURVE ( 'NONE', #76469, #39909, #63394, .T. ) ; +#46681 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30307, #67540, #80049, #42768 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.349967114368502400E-016, 0.001179148174663107600 ), + .UNSPECIFIED. ) ; +#46683 = FACE_OUTER_BOUND ( 'NONE', #6392, .T. ) ; +#46684 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707913300, 61.66410593583241000, -28.68054222049963200 ) ) ; +#46685 = VERTEX_POINT ( 'NONE', #19290 ) ; +#46686 = AXIS2_PLACEMENT_3D ( 'NONE', #60225, #66470, #16695 ) ; +#46687 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153560700, 70.79999999999985500, -28.55171188418395900 ) ) ; +#46688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78488, #34962, #3929, #47413 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674730719089700E-007, 0.0002745102201811255000 ), + .UNSPECIFIED. ) ; +#46689 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747182600, 39.13131911501876200, -28.51286550264508800 ) ) ; +#46690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46691 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690204100, 85.79999999999967000, -28.70555803803030800 ) ) ; +#46692 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857167400, 22.67681279774499400, -28.70555803802995200 ) ) ; +#46693 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655600300, 28.42298334620759400, -28.20555803802994500 ) ) ; +#46694 = ADVANCED_FACE ( 'NONE', ( #13767 ), #11804, .F. ) ; +#46695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70279, #26798, #2007, #45494 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345036500, 0.0008131256040089892500 ), + .UNSPECIFIED. ) ; +#46696 = CONICAL_SURFACE ( 'NONE', #77398, 10.00000000000009400, 0.7853981633974447300 ) ; +#46697 = EDGE_LOOP ( 'NONE', ( #40102, #51575, #69742, #68124 ) ) ; +#46698 = AXIS2_PLACEMENT_3D ( 'NONE', #57084, #32330, #38532 ) ; +#46699 = VERTEX_POINT ( 'NONE', #769 ) ; +#46700 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528152600, 20.46868088498121800, -28.51286550264509900 ) ) ; +#46701 = PLANE ( 'NONE', #45908 ) ; +#46702 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 7.500000000000000900, 6.847000845227646500 ) ) ; +#46703 = FACE_OUTER_BOUND ( 'NONE', #34682, .T. ) ; +#46704 = ORIENTED_EDGE ( 'NONE', *, *, #45047, .T. ) ; +#46705 = EDGE_LOOP ( 'NONE', ( #30401, #25196, #13868, #74925 ) ) ; +#46706 = ORIENTED_EDGE ( 'NONE', *, *, #35137, .F. ) ; +#46707 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462965300, 51.25732391202377200, -28.20555803803014400 ) ) ; +#46708 = ORIENTED_EDGE ( 'NONE', *, *, #67965, .F. ) ; +#46709 = ORIENTED_EDGE ( 'NONE', *, *, #11535, .T. ) ; +#46710 = ORIENTED_EDGE ( 'NONE', *, *, #37862, .F. ) ; +#46711 = VERTEX_POINT ( 'NONE', #44259 ) ; +#46712 = ADVANCED_FACE ( 'NONE', ( #46796 ), #59482, .T. ) ; +#46713 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 41.83333333333333600, -6.205558038030004800 ) ) ; +#46714 = AXIS2_PLACEMENT_3D ( 'NONE', #67935, #30687, #74212 ) ; +#46715 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 6.833333333333344600, -9.205558038030003900 ) ) ; +#46716 = ORIENTED_EDGE ( 'NONE', *, *, #77625, .T. ) ; +#46717 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#46718 = CONICAL_SURFACE ( 'NONE', #49959, 10.50000000000009600, 0.7853981633974500600 ) ; +#46719 = EDGE_CURVE ( 'NONE', #6689, #53776, #68174, .T. ) ; +#46720 = ORIENTED_EDGE ( 'NONE', *, *, #43767, .T. ) ; +#46721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46722 = EDGE_LOOP ( 'NONE', ( #68517, #77936, #28279 ) ) ; +#46723 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46724 = ORIENTED_EDGE ( 'NONE', *, *, #76765, .T. ) ; +#46725 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 44.16666666666668600, 9.794441961969994300 ) ) ; +#46726 = EDGE_LOOP ( 'NONE', ( #35686, #59850, #6690, #33248 ) ) ; +#46727 = VERTEX_POINT ( 'NONE', #38286 ) ; +#46728 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4938, #47897, #36223, #79737 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674238356731000E-007, 0.0007606607323829817600 ), + .UNSPECIFIED. ) ; +#46729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46731 = CONICAL_SURFACE ( 'NONE', #10270, 10.50000000000009600, 0.7853981633974500600 ) ; +#46732 = VERTEX_POINT ( 'NONE', #44521 ) ; +#46733 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3326, #59378, #15855, #65649 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521668113100, 0.0009492057883285828100 ), + .UNSPECIFIED. ) ; +#46734 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#46735 = ADVANCED_FACE ( 'NONE', ( #76014 ), #26407, .T. ) ; +#46736 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#46737 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46738 = EDGE_CURVE ( 'NONE', #79782, #44515, #53713, .T. ) ; +#46739 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46740 = FACE_OUTER_BOUND ( 'NONE', #7359, .T. ) ; +#46741 = ORIENTED_EDGE ( 'NONE', *, *, #31741, .T. ) ; +#46742 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#46743 = EDGE_CURVE ( 'NONE', #66775, #67901, #39225, .T. ) ; +#46744 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877881200, 50.07332680091205600, -28.37233769390154200 ) ) ; +#46745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46746 = ORIENTED_EDGE ( 'NONE', *, *, #517, .T. ) ; +#46747 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#46748 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192851400, 56.79999999999998300, -28.70555803802997700 ) ) ; +#46749 = AXIS2_PLACEMENT_3D ( 'NONE', #5174, #67199, #79705 ) ; +#46750 = EDGE_CURVE ( 'NONE', #146, #76920, #24798, .T. ) ; +#46751 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46752 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46754 = EDGE_CURVE ( 'NONE', #68238, #22539, #42907, .T. ) ; +#46755 = CARTESIAN_POINT ( 'NONE', ( -10.04027359854958900, 28.72437813624630100, -28.30310527599299400 ) ) ; +#46756 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#46757 = AXIS2_PLACEMENT_3D ( 'NONE', #32485, #76006, #38706 ) ; +#46758 = CIRCLE ( 'NONE', #39032, 10.00000000000009200 ) ; +#46759 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 47.66666666666667900, -5.205558038030003100 ) ) ; +#46760 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655543400, 41.67701665379215800, -28.20555803802997400 ) ) ; +#46761 = EDGE_LOOP ( 'NONE', ( #40107, #60534, #65102, #75209, #79143 ) ) ; +#46762 = VERTEX_POINT ( 'NONE', #69854 ) ; +#46763 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46764 = ORIENTED_EDGE ( 'NONE', *, *, #18672, .F. ) ; +#46765 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830876000, 59.95045548864061400, -28.33400579219036800 ) ) ; +#46766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46767 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46768 = AXIS2_PLACEMENT_3D ( 'NONE', #51577, #14360, #57871 ) ; +#46769 = CARTESIAN_POINT ( 'NONE', ( 4.239894507327894000, 61.93585231025932100, -28.38420446581286400 ) ) ; +#46770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46772 = EDGE_CURVE ( 'NONE', #30036, #65603, #10343, .T. ) ; +#46773 = EDGE_CURVE ( 'NONE', #66775, #24749, #28385, .T. ) ; +#46774 = AXIS2_PLACEMENT_3D ( 'NONE', #50387, #13199, #56682 ) ; +#46775 = CIRCLE ( 'NONE', #48662, 9.500000000000099500 ) ; +#46776 = VERTEX_POINT ( 'NONE', #20368 ) ; +#46777 = VERTEX_POINT ( 'NONE', #39098 ) ; +#46778 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46779 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 51.33333333333334300, -8.133761268305512700 ) ) ; +#46780 = FACE_OUTER_BOUND ( 'NONE', #51416, .T. ) ; +#46781 = EDGE_LOOP ( 'NONE', ( #13678, #6143, #48674, #52522 ) ) ; +#46782 = ORIENTED_EDGE ( 'NONE', *, *, #62774, .F. ) ; +#46783 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 81.62753447840887600, -28.38801640354855100 ) ) ; +#46784 = ORIENTED_EDGE ( 'NONE', *, *, #54851, .T. ) ; +#46786 = ORIENTED_EDGE ( 'NONE', *, *, #24283, .F. ) ; +#46785 = EDGE_CURVE ( 'NONE', #65517, #42624, #30321, .T. ) ; +#46787 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 12.83333333333334300, 0.9380355014189731800 ) ) ; +#46788 = CARTESIAN_POINT ( 'NONE', ( 21.17575776913428200, 94.68746338599137900, -26.59223850014731700 ) ) ; +#46789 = AXIS2_PLACEMENT_3D ( 'NONE', #55544, #18295, #61834 ) ; +#46790 = AXIS2_PLACEMENT_3D ( 'NONE', #28230, #71720, #34456 ) ; +#46791 = CIRCLE ( 'NONE', #7236, 10.00000000000009600 ) ; +#46792 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195352500, 31.41634594406195200, -28.35038903107271900 ) ) ; +#46793 = ADVANCED_FACE ( 'NONE', ( #44820 ), #24441, .F. ) ; +#46794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15940, #9683, #59467, #22198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389829731700E-007, 0.0008082646680357270500 ), + .UNSPECIFIED. ) ; +#46795 = ORIENTED_EDGE ( 'NONE', *, *, #66132, .F. ) ; +#46796 = FACE_OUTER_BOUND ( 'NONE', #72351, .T. ) ; +#46797 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#46798 = ORIENTED_EDGE ( 'NONE', *, *, #49952, .F. ) ; +#46799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46800 = ORIENTED_EDGE ( 'NONE', *, *, #71344, .F. ) ; +#46801 = VERTEX_POINT ( 'NONE', #33138 ) ; +#46802 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#46803 = ORIENTED_EDGE ( 'NONE', *, *, #57285, .F. ) ; +#46804 = CONICAL_SURFACE ( 'NONE', #31604, 10.50000000000009600, 0.7853981633974518300 ) ; +#46805 = ADVANCED_FACE ( 'NONE', ( #56570 ), #72141, .F. ) ; +#46806 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 16.16666666666667900, 0.1341879241256129200 ) ) ; +#46807 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812200, 30.96868088498122200, -28.51286550264512700 ) ) ; +#46808 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25420, #31660, #13178, #56660 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917699779000E-007, 0.0004089036991175743900 ), + .UNSPECIFIED. ) ; +#46809 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46811 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 56.33333333333334300, 2.794441961969998300 ) ) ; +#46812 = VERTEX_POINT ( 'NONE', #39368 ) ; +#46813 = AXIS2_PLACEMENT_3D ( 'NONE', #64315, #70798, #14779 ) ; +#46814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46815 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#46816 = CONICAL_SURFACE ( 'NONE', #26387, 10.00000000000009400, 0.7853981633974447300 ) ; +#46818 = EDGE_LOOP ( 'NONE', ( #56211, #13114, #65599, #61288, #59344 ) ) ; +#46817 = ADVANCED_FACE ( 'NONE', ( #55561 ), #38989, .F. ) ; +#46819 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188355100, 28.70564881207762300, -28.41114655922298500 ) ) ; +#46820 = CARTESIAN_POINT ( 'NONE', ( 1.116254736416757900, 24.54999999999998300, -28.53994725305375400 ) ) ; +#46821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46822 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929813600, 85.79999999999950000, -28.70555803803047500 ) ) ; +#46823 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#46824 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385193600, 31.10677350908857300, -28.30799595738881900 ) ) ; +#46825 = AXIS2_PLACEMENT_3D ( 'NONE', #16252, #47207, #59771 ) ; +#46826 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30409, #67638, #61413, #73909 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736122634200E-007, 0.0009376786059871964600 ), + .UNSPECIFIED. ) ; +#46827 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#46828 = ADVANCED_FACE ( 'NONE', ( #57523 ), #5942, .F. ) ; +#46829 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#46830 = EDGE_CURVE ( 'NONE', #520, #901, #40975, .T. ) ; +#46831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46832 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410168000, 60.46048989987132700, -28.36889022317254200 ) ) ; +#46833 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#46834 = AXIS2_PLACEMENT_3D ( 'NONE', #41977, #4454, #73015 ) ; +#46835 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46836 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46838 = VERTEX_POINT ( 'NONE', #27169 ) ; +#46839 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 20.46868088498121800, -28.51286550264509900 ) ) ; +#46840 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46841 = ORIENTED_EDGE ( 'NONE', *, *, #40809, .F. ) ; +#46842 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 77.94142842854297700, -28.20555803802997700 ) ) ; +#46843 = VERTEX_POINT ( 'NONE', #33404 ) ; +#46844 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.48922577050341300, -28.37255355648630600 ) ) ; +#46845 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46847 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46848 = CARTESIAN_POINT ( 'NONE', ( 4.427738916792316500, 8.799999999999668500, -28.63329695482266100 ) ) ; +#46849 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 30.93250300240228900, -28.20555803802996700 ) ) ; +#46850 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 81.43650294695132200, -28.30782889147482400 ) ) ; +#46851 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519000, 65.79999999999982700, -28.63843632546338100 ) ) ; +#46852 = CARTESIAN_POINT ( 'NONE', ( 4.397454647608784100, 50.73330895810814700, -28.60301268563897300 ) ) ; +#46853 = CONICAL_SURFACE ( 'NONE', #32487, 10.00000000000009400, 0.7853981633974447300 ) ; +#46854 = ORIENTED_EDGE ( 'NONE', *, *, #53897, .F. ) ; +#46855 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 26.42318720225497900, -28.70555803802994200 ) ) ; +#46856 = ORIENTED_EDGE ( 'NONE', *, *, #178, .F. ) ; +#46857 = EDGE_CURVE ( 'NONE', #52802, #30539, #76638, .T. ) ; +#46858 = CARTESIAN_POINT ( 'NONE', ( -9.572261083207317600, 8.799999999999988300, -28.63329695482270100 ) ) ; +#46859 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148361800, 34.09761904761934700, -28.70555803802995200 ) ) ; +#46860 = CIRCLE ( 'NONE', #2573, 10.00000000000009200 ) ; +#46861 = EDGE_CURVE ( 'NONE', #34228, #46074, #62202, .T. ) ; +#46862 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#46863 = ORIENTED_EDGE ( 'NONE', *, *, #16275, .T. ) ; +#46865 = ORIENTED_EDGE ( 'NONE', *, *, #23804, .F. ) ; +#46864 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192774100, 84.80000000000008200, -28.70555803802997700 ) ) ; +#46866 = ORIENTED_EDGE ( 'NONE', *, *, #3171, .T. ) ; +#46867 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46868 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052157200, 60.28233213024647300, -28.25051428653848300 ) ) ; +#46869 = CONICAL_SURFACE ( 'NONE', #67678, 10.50000000000009600, 0.7853981633974482800 ) ; +#46870 = EDGE_CURVE ( 'NONE', #42622, #57688, #47695, .T. ) ; +#46871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78903, #10612, #29420, #72898 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453806916100, 0.0005317208426583702300 ), + .UNSPECIFIED. ) ; +#46872 = EDGE_CURVE ( 'NONE', #47573, #55930, #22485, .T. ) ; +#46873 = AXIS2_PLACEMENT_3D ( 'NONE', #59825, #78869, #10304 ) ; +#46874 = CONICAL_SURFACE ( 'NONE', #67645, 10.00000000000009200, 0.7853981633974447300 ) ; +#46875 = ORIENTED_EDGE ( 'NONE', *, *, #45429, .F. ) ; +#46876 = VERTEX_POINT ( 'NONE', #2636 ) ; +#46877 = ORIENTED_EDGE ( 'NONE', *, *, #40209, .T. ) ; +#46878 = EDGE_LOOP ( 'NONE', ( #12821, #77644, #75620 ) ) ; +#46879 = CONICAL_SURFACE ( 'NONE', #76272, 10.50000000000009600, 0.7853981633974500600 ) ; +#46880 = ORIENTED_EDGE ( 'NONE', *, *, #72234, .F. ) ; +#46881 = CIRCLE ( 'NONE', #40392, 10.00000000000009600 ) ; +#46882 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 62.33333333333333600, -8.133761268305512700 ) ) ; +#46883 = AXIS2_PLACEMENT_3D ( 'NONE', #11921, #55415, #18163 ) ; +#46884 = EDGE_CURVE ( 'NONE', #31227, #23115, #9838, .T. ) ; +#46885 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46886 = EDGE_CURVE ( 'NONE', #11257, #66318, #61454, .T. ) ; +#46887 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#46888 = EDGE_CURVE ( 'NONE', #17209, #30658, #33264, .T. ) ; +#46889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46890 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049508900, 41.90771342879318000, -28.53891855579982800 ) ) ; +#46891 = AXIS2_PLACEMENT_3D ( 'NONE', #51386, #14183, #57686 ) ; +#46892 = CONICAL_SURFACE ( 'NONE', #18501, 10.00000000000009400, 0.7853981633974447300 ) ; +#46893 = EDGE_LOOP ( 'NONE', ( #56568, #16118, #27251 ) ) ; +#46895 = ORIENTED_EDGE ( 'NONE', *, *, #25359, .F. ) ; +#46894 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.43250300240228500, -28.20555803802997700 ) ) ; +#46896 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551028200, 56.50000000000000000, 4.650848422521008300 ) ) ; +#46897 = AXIS2_PLACEMENT_3D ( 'NONE', #22058, #28354, #59309 ) ; +#46898 = EDGE_CURVE ( 'NONE', #58503, #67291, #18808, .T. ) ; +#46899 = ADVANCED_FACE ( 'NONE', ( #37055 ), #51617, .T. ) ; +#46900 = AXIS2_PLACEMENT_3D ( 'NONE', #10121, #53633, #16380 ) ; +#46901 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15620, #52857, #28165, #71651 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386350670000, 0.0008131256040088917800 ), + .UNSPECIFIED. ) ; +#46902 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46903 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#46904 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489605100, 39.15930907398613000, -28.35186440610853600 ) ) ; +#46905 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182100, 28.63131911501876900, -28.51286550264508100 ) ) ; +#46906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#46907 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 33.66666666666667900, 4.294441961969993400 ) ) ; +#46908 = ADVANCED_FACE ( 'NONE', ( #70147 ), #65516, .T. ) ; +#46909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43677, #49929, #25225, #68730 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438981465200E-007, 0.0007763347809200209700 ), + .UNSPECIFIED. ) ; +#46910 = VERTEX_POINT ( 'NONE', #40719 ) ; +#46911 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#46912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46914 = VERTEX_POINT ( 'NONE', #3446 ) ; +#46913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46915 = ADVANCED_FACE ( 'NONE', ( #53621 ), #2011, .F. ) ; +#46916 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#46917 = ADVANCED_FACE ( 'NONE', ( #3967 ), #49671, .T. ) ; +#46918 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805681500, 43.91427200762527900, -28.67630847257083800 ) ) ; +#46919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46920 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46921 = FACE_OUTER_BOUND ( 'NONE', #45880, .T. ) ; +#46922 = AXIS2_PLACEMENT_3D ( 'NONE', #369, #43859, #6630 ) ; +#46923 = ORIENTED_EDGE ( 'NONE', *, *, #68601, .F. ) ; +#46924 = FACE_OUTER_BOUND ( 'NONE', #67195, .T. ) ; +#46925 = ORIENTED_EDGE ( 'NONE', *, *, #55482, .F. ) ; +#46926 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, -3.999999999999989800, -1.205558038030005300 ) ) ; +#46927 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#46928 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 101.5999999999999900, -18.70555803803001300 ) ) ; +#46929 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#46930 = EDGE_LOOP ( 'NONE', ( #62695, #64257, #55405, #41822, #80436, #10763, #68935, #53974 ) ) ; +#46931 = CIRCLE ( 'NONE', #6930, 10.00000000000009200 ) ; +#46932 = VERTEX_POINT ( 'NONE', #34766 ) ; +#46933 = ORIENTED_EDGE ( 'NONE', *, *, #48896, .T. ) ; +#46934 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46935 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 90.13716795162659400, -28.48697406221657500 ) ) ; +#46936 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709906800, 20.53732497909461700, -28.41043597897460800 ) ) ; +#46937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46938 = AXIS2_PLACEMENT_3D ( 'NONE', #3587, #47088, #9863 ) ; +#46939 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#46940 = CARTESIAN_POINT ( 'NONE', ( 16.56790757632392900, 33.87072804553902500, -28.58363361004981200 ) ) ; +#46941 = CIRCLE ( 'NONE', #8187, 10.50000000000009600 ) ; +#46942 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 38.98922577050341700, -28.37255355648632000 ) ) ; +#46943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#46944 = EDGE_CURVE ( 'NONE', #25518, #68696, #68205, .T. ) ; +#46945 = CARTESIAN_POINT ( 'NONE', ( 11.11891772579880700, 51.10238820582976200, -28.32098513914468200 ) ) ; +#46946 = ORIENTED_EDGE ( 'NONE', *, *, #46481, .F. ) ; +#46947 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180760100, 81.65075715145273700, -28.20555803802997700 ) ) ; +#46948 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#46949 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 9.940690926013783000, -28.35186440610855700 ) ) ; +#46950 = FACE_OUTER_BOUND ( 'NONE', #74772, .T. ) ; +#46951 = AXIS2_PLACEMENT_3D ( 'NONE', #4262, #10530, #22771 ) ; +#46952 = PLANE ( 'NONE', #46522 ) ; +#46953 = ORIENTED_EDGE ( 'NONE', *, *, #54060, .T. ) ; +#46954 = ORIENTED_EDGE ( 'NONE', *, *, #58793, .T. ) ; +#46955 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ; +#46956 = FACE_OUTER_BOUND ( 'NONE', #48325, .T. ) ; +#46957 = VERTEX_POINT ( 'NONE', #3720 ) ; +#46958 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#46959 = FACE_OUTER_BOUND ( 'NONE', #39001, .T. ) ; +#46960 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#46961 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46963 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#46964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20530, #39262, #58048, #20796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213731429100E-007, 0.0008724366121415453300 ), + .UNSPECIFIED. ) ; +#46965 = ORIENTED_EDGE ( 'NONE', *, *, #43767, .F. ) ; +#46966 = ORIENTED_EDGE ( 'NONE', *, *, #27924, .F. ) ; +#46967 = EDGE_CURVE ( 'NONE', #58094, #2201, #4342, .T. ) ; +#46968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46969 = CONICAL_SURFACE ( 'NONE', #27348, 10.50000000000009600, 0.7853981633974500600 ) ; +#46970 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528142000, 30.96868088498121800, -28.51286550264512000 ) ) ; +#46971 = ORIENTED_EDGE ( 'NONE', *, *, #76965, .T. ) ; +#46972 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 5.333333333333341900, -6.705558038030005700 ) ) ; +#46973 = CONICAL_SURFACE ( 'NONE', #41006, 10.50000000000009600, 0.7853981633974518300 ) ; +#46974 = EDGE_CURVE ( 'NONE', #49715, #72305, #70655, .T. ) ; +#46975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#46976 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 39.66666666666667100, 3.124568980892192800 ) ) ; +#46977 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653713000, 90.20590598242350200, -28.39369363572371400 ) ) ; +#46978 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46979 = EDGE_CURVE ( 'NONE', #61765, #25994, #74092, .T. ) ; +#46980 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 4.666666666666680300, 5.722645192245505700 ) ) ; +#46981 = EDGE_CURVE ( 'NONE', #45791, #58834, #56190, .T. ) ; +#46982 = AXIS2_PLACEMENT_3D ( 'NONE', #3671, #28761, #72249 ) ; +#46983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#46984 = EDGE_CURVE ( 'NONE', #29591, #33975, #66283, .T. ) ; +#46985 = CARTESIAN_POINT ( 'NONE', ( 7.106453102137325400, 44.44999999999996700, 3.779894985458354600 ) ) ; +#46986 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 42.00000000000001400, -12.20555803803000200 ) ) ; +#46987 = CARTESIAN_POINT ( 'NONE', ( 15.56627166159372200, 40.19809558586061400, -28.70555803803001600 ) ) ; +#46988 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#46989 = CARTESIAN_POINT ( 'NONE', ( -16.88108227420126200, 61.10238820582982600, -28.32098513914461400 ) ) ; +#46990 = ORIENTED_EDGE ( 'NONE', *, *, #57366, .F. ) ; +#46991 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8748, #14769, #21304, #64839, #27566, #71056, #33802, #77310 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 4.336808689942017300E-019, 0.001725689008354083100, 0.002588533512531123100, 0.003451378016708163700 ), + .UNSPECIFIED. ) ; +#46992 = AXIS2_PLACEMENT_3D ( 'NONE', #18746, #62265, #25000 ) ; +#46993 = EDGE_CURVE ( 'NONE', #17105, #75300, #41719, .T. ) ; +#46994 = EDGE_CURVE ( 'NONE', #31311, #33093, #27302, .T. ) ; +#46995 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46996 = EDGE_CURVE ( 'NONE', #78429, #5994, #20538, .T. ) ; +#46997 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714272300, 36.92318720225497900, -28.70555803802995200 ) ) ; +#46998 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492433100, 39.70543520232828900, -28.70555803802995200 ) ) ; +#46999 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 0.0000000000000000000, 4.415659757031871100E-015 ) ) ; +#47000 = FACE_OUTER_BOUND ( 'NONE', #18403, .T. ) ; +#47001 = EDGE_LOOP ( 'NONE', ( #33019, #3747, #64644, #8803 ) ) ; +#47002 = CYLINDRICAL_SURFACE ( 'NONE', #68032, 10.00000000000000200 ) ; +#47003 = ORIENTED_EDGE ( 'NONE', *, *, #26546, .F. ) ; +#47004 = AXIS2_PLACEMENT_3D ( 'NONE', #77628, #40361, #3095 ) ; +#47005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47006 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47007 = ORIENTED_EDGE ( 'NONE', *, *, #61487, .F. ) ; +#47008 = CONICAL_SURFACE ( 'NONE', #25665, 10.50000000000009400, 0.7853981633974500600 ) ; +#47009 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26329, #63581, #69804, #32548 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007340749925888157500, 0.001390854281699860400 ), + .UNSPECIFIED. ) ; +#47010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47011 = EDGE_LOOP ( 'NONE', ( #37657, #52420, #16158 ) ) ; +#47012 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#47013 = ORIENTED_EDGE ( 'NONE', *, *, #47439, .T. ) ; +#47014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47015 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 77.94142842854297700, -28.20555803802997700 ) ) ; +#47016 = ADVANCED_FACE ( 'NONE', ( #33167 ), #31236, .T. ) ; +#47017 = AXIS2_PLACEMENT_3D ( 'NONE', #68201, #68477, #74734 ) ; +#47018 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47019 = ORIENTED_EDGE ( 'NONE', *, *, #26546, .T. ) ; +#47020 = AXIS2_PLACEMENT_3D ( 'NONE', #13412, #56910, #19648 ) ; +#47021 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 87.94142842854296300, -28.37229765499282100 ) ) ; +#47022 = CIRCLE ( 'NONE', #72806, 9.500000000000099500 ) ; +#47023 = ADVANCED_FACE ( 'NONE', ( #16629 ), #78934, .T. ) ; +#47024 = CIRCLE ( 'NONE', #70140, 10.50000000000009600 ) ; +#47025 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 59.77559325427183300, -28.45987523529581900 ) ) ; +#47026 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47028 = EDGE_LOOP ( 'NONE', ( #65984, #60663, #54493, #26065 ) ) ; +#47029 = CONICAL_SURFACE ( 'NONE', #47711, 10.50000000000009600, 0.7853981633974500600 ) ; +#47030 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 45.49999999999998600, 4.650848422521012700 ) ) ; +#47031 = ORIENTED_EDGE ( 'NONE', *, *, #15813, .F. ) ; +#47032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47033 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#47034 = ORIENTED_EDGE ( 'NONE', *, *, #39419, .F. ) ; +#47035 = ORIENTED_EDGE ( 'NONE', *, *, #5213, .F. ) ; +#47036 = ORIENTED_EDGE ( 'NONE', *, *, #69911, .T. ) ; +#47037 = CIRCLE ( 'NONE', #16362, 10.00000000000009200 ) ; +#47038 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47039 = AXIS2_PLACEMENT_3D ( 'NONE', #62829, #56539, #31818 ) ; +#47040 = ORIENTED_EDGE ( 'NONE', *, *, #12983, .T. ) ; +#47041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47042 = CARTESIAN_POINT ( 'NONE', ( 1.869858741100101300, 57.15000000000000600, 6.572849786732822600 ) ) ; +#47043 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#47045 = ADVANCED_FACE ( 'NONE', ( #18585 ), #48295, .T. ) ; +#47044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22218, #28522, #47201, #9974 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925607684200E-007, 0.0004084731003435263100 ), + .UNSPECIFIED. ) ; +#47046 = VERTEX_POINT ( 'NONE', #23589 ) ; +#47047 = ORIENTED_EDGE ( 'NONE', *, *, #23089, .F. ) ; +#47048 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 41.44069092601379400, -28.35186440610858600 ) ) ; +#47049 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551029100, 53.50000000000000700, 4.650848422521010900 ) ) ; +#47050 = VERTEX_POINT ( 'NONE', #54307 ) ; +#47051 = EDGE_CURVE ( 'NONE', #22541, #51858, #12842, .T. ) ; +#47052 = FACE_OUTER_BOUND ( 'NONE', #37406, .T. ) ; +#47053 = AXIS2_PLACEMENT_3D ( 'NONE', #1594, #76120, #57371 ) ; +#47054 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 30.74660241562190100, -28.20555803802995200 ) ) ; +#47055 = CARTESIAN_POINT ( 'NONE', ( -11.03592035693671600, 31.09789380924897300, -28.25343951603329300 ) ) ; +#47056 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 10.66666666666668600, -5.205558038030003100 ) ) ; +#47057 = CARTESIAN_POINT ( 'NONE', ( 24.03615795620379800, 96.11787285064066600, -22.99858302594087800 ) ) ; +#47058 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#47059 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28793, #22496, #59764, #35023 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345730900, 0.0008131256040082272700 ), + .UNSPECIFIED. ) ; +#47060 = AXIS2_PLACEMENT_3D ( 'NONE', #4955, #73508, #67250 ) ; +#47061 = CONICAL_SURFACE ( 'NONE', #7522, 10.00000000000009600, 0.7853981633974447300 ) ; +#47062 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187870600, 49.49813478817169700, -28.24089224568489300 ) ) ; +#47063 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180778700, 51.65075715145311400, -28.20555803802997700 ) ) ; +#47064 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#47065 = ORIENTED_EDGE ( 'NONE', *, *, #17348, .T. ) ; +#47066 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 14.00000000000001800, -1.205558038030002800 ) ) ; +#47067 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#47068 = ORIENTED_EDGE ( 'NONE', *, *, #45777, .T. ) ; +#47069 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#47070 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.16666666666667100, -3.349151577478988200 ) ) ; +#47071 = CIRCLE ( 'NONE', #13092, 10.50000000000009800 ) ; +#47072 = EDGE_LOOP ( 'NONE', ( #33437, #13437, #20677, #24671, #49482, #64088, #68110, #13330 ) ) ; +#47073 = CIRCLE ( 'NONE', #64381, 10.00000000000009600 ) ; +#47074 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 54.13556610137280200, -28.54207364681942500 ) ) ; +#47076 = EDGE_CURVE ( 'NONE', #68008, #22165, #35158, .T. ) ; +#47075 = ORIENTED_EDGE ( 'NONE', *, *, #18878, .T. ) ; +#47077 = EDGE_CURVE ( 'NONE', #4131, #68985, #64351, .T. ) ; +#47078 = CONICAL_SURFACE ( 'NONE', #73555, 10.50000000000009600, 0.7853981633974500600 ) ; +#47079 = CIRCLE ( 'NONE', #37713, 10.00000000000009200 ) ; +#47080 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70935, #8896, #27718, #71207 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921143049800E-007, 0.0004084731003434223900 ), + .UNSPECIFIED. ) ; +#47081 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#47082 = ORIENTED_EDGE ( 'NONE', *, *, #32826, .T. ) ; +#47083 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47084 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041000, 77.94142842854287800, -28.20555803803047800 ) ) ; +#47085 = ORIENTED_EDGE ( 'NONE', *, *, #71136, .T. ) ; +#47086 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.65857157145701000, -28.20555803802997700 ) ) ; +#47087 = ORIENTED_EDGE ( 'NONE', *, *, #32178, .F. ) ; +#47088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47089 = EDGE_CURVE ( 'NONE', #46628, #69640, #79162, .T. ) ; +#47090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47091 = ADVANCED_FACE ( 'NONE', ( #62368 ), #76948, .T. ) ; +#47092 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 42.97376207875061000, -28.70555803802997700 ) ) ; +#47094 = CONICAL_SURFACE ( 'NONE', #45563, 10.50000000000009600, 0.7853981633974482800 ) ; +#47093 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#47095 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#47096 = ORIENTED_EDGE ( 'NONE', *, *, #60468, .T. ) ; +#47097 = CARTESIAN_POINT ( 'NONE', ( 10.75693756550904600, 51.43482212736761700, -28.29548618595846300 ) ) ; +#47098 = EDGE_CURVE ( 'NONE', #10425, #1484, #64710, .T. ) ; +#47099 = CIRCLE ( 'NONE', #64937, 10.00000000000009200 ) ; +#47100 = EDGE_CURVE ( 'NONE', #1596, #13368, #47734, .T. ) ; +#47101 = VERTEX_POINT ( 'NONE', #5618 ) ; +#47102 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844081200, 61.29362734601329500, -28.24165217761328300 ) ) ; +#47103 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 26.89962244433175400, -28.53664883431607500 ) ) ; +#47104 = EDGE_LOOP ( 'NONE', ( #61366, #59329, #47423, #54157 ) ) ; +#47105 = ORIENTED_EDGE ( 'NONE', *, *, #71054, .F. ) ; +#47106 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47107 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47108 = ORIENTED_EDGE ( 'NONE', *, *, #56976, .F. ) ; +#47109 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47110 = ORIENTED_EDGE ( 'NONE', *, *, #5181, .T. ) ; +#47111 = ADVANCED_FACE ( 'NONE', ( #45775 ), #49090, .T. ) ; +#47112 = FACE_OUTER_BOUND ( 'NONE', #80792, .T. ) ; +#47113 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576916500, 45.54999999999999700, -28.65220501466659500 ) ) ; +#47114 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47115 = AXIS2_PLACEMENT_3D ( 'NONE', #15763, #71799, #28322 ) ; +#47116 = EDGE_CURVE ( 'NONE', #39193, #74917, #14676, .T. ) ; +#47117 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310450800, 18.10230989102908700, -28.61774594594334400 ) ) ; +#47118 = EDGE_CURVE ( 'NONE', #35408, #40334, #29320, .T. ) ; +#47119 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 77.22261628933269200, -28.70555803802997700 ) ) ; +#47120 = EDGE_CURVE ( 'NONE', #23878, #67043, #63, .T. ) ; +#47121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47122 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813500, 89.60439022488338900, -28.70555803802997700 ) ) ; +#47123 = ORIENTED_EDGE ( 'NONE', *, *, #13915, .F. ) ; +#47124 = VERTEX_POINT ( 'NONE', #80420 ) ; +#47125 = CARTESIAN_POINT ( 'NONE', ( -24.00438366383809500, 99.61328978911305400, -23.08064291336276600 ) ) ; +#47126 = AXIS2_PLACEMENT_3D ( 'NONE', #49549, #56111, #24853 ) ; +#47127 = ORIENTED_EDGE ( 'NONE', *, *, #48543, .F. ) ; +#47128 = FACE_OUTER_BOUND ( 'NONE', #11056, .T. ) ; +#47129 = CARTESIAN_POINT ( 'NONE', ( -16.63218627419846700, 91.54556288798843900, -28.57145755052419400 ) ) ; +#47130 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432843700, 18.35339758437810400, -28.20555803802992800 ) ) ; +#47131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47132 = AXIS2_PLACEMENT_3D ( 'NONE', #40304, #3042, #46534 ) ; +#47133 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823697100, 21.40456253568401100, -28.61277292027076400 ) ) ; +#47134 = AXIS2_PLACEMENT_3D ( 'NONE', #75576, #38294, #1045 ) ; +#47135 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700700, 44.61903418172683900, -28.69431509262337700 ) ) ; +#47136 = CARTESIAN_POINT ( 'NONE', ( -17.03295546792553900, 68.40241253122516700, -28.49829281932970600 ) ) ; +#47137 = CARTESIAN_POINT ( 'NONE', ( -15.27292969368531300, 65.79999999999999700, -28.53959444491375700 ) ) ; +#47138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47140 = ADVANCED_FACE ( 'NONE', ( #60444 ), #41901, .F. ) ; +#47139 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17623, #5093, #23883, #67383 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.815079945522738900E-016, 0.001179148174662868900 ), + .UNSPECIFIED. ) ; +#47141 = FACE_OUTER_BOUND ( 'NONE', #16998, .T. ) ; +#47142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47143 = EDGE_LOOP ( 'NONE', ( #17417, #46058, #26084 ) ) ; +#47144 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 60.16666666666668600, 6.794441961969992500 ) ) ; +#47145 = AXIS2_PLACEMENT_3D ( 'NONE', #30652, #74168, #36855 ) ; +#47146 = EDGE_CURVE ( 'NONE', #22814, #32523, #50178, .T. ) ; +#47147 = EDGE_LOOP ( 'NONE', ( #26799, #70689, #69995 ) ) ; +#47148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47149 = ORIENTED_EDGE ( 'NONE', *, *, #4965, .F. ) ; +#47150 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489758300, 18.15930907398603000, -28.35186440610867500 ) ) ; +#47151 = CONICAL_SURFACE ( 'NONE', #13579, 10.50000000000009600, 0.7853981633974500600 ) ; +#47152 = CONICAL_SURFACE ( 'NONE', #56464, 10.00000000000009400, 0.7853981633974447300 ) ; +#47153 = EDGE_LOOP ( 'NONE', ( #48571, #53807, #66110, #11292 ) ) ; +#47154 = EDGE_CURVE ( 'NONE', #30178, #28056, #27347, .T. ) ; +#47155 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999997300, 54.33333333333335700, -8.133761268305514500 ) ) ; +#47156 = ORIENTED_EDGE ( 'NONE', *, *, #74789, .F. ) ; +#47157 = CONICAL_SURFACE ( 'NONE', #69841, 10.50000000000009600, 0.7853981633974482800 ) ; +#47158 = FACE_OUTER_BOUND ( 'NONE', #40986, .T. ) ; +#47159 = AXIS2_PLACEMENT_3D ( 'NONE', #17528, #5263, #48751 ) ; +#47160 = ORIENTED_EDGE ( 'NONE', *, *, #7529, .T. ) ; +#47161 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47162 = ORIENTED_EDGE ( 'NONE', *, *, #17126, .T. ) ; +#47163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47164 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#47165 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807245900, 56.80000000000004700, -28.70555803803014400 ) ) ; +#47166 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 31.50000000000001400, -9.258116921287651700 ) ) ; +#47167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47168 = CIRCLE ( 'NONE', #71115, 10.50000000000009800 ) ; +#47169 = EDGE_LOOP ( 'NONE', ( #37421, #74625, #39480, #1220 ) ) ; +#47170 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#47171 = FACE_OUTER_BOUND ( 'NONE', #7765, .T. ) ; +#47172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47173 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, 69.97246552159074900, -28.38801640354893200 ) ) ; +#47174 = EDGE_LOOP ( 'NONE', ( #14662, #20468, #60199 ) ) ; +#47175 = ORIENTED_EDGE ( 'NONE', *, *, #72299, .T. ) ; +#47176 = ORIENTED_EDGE ( 'NONE', *, *, #22376, .F. ) ; +#47177 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19029, #62307, #68810, #31566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736136902400E-007, 0.0002745102201815276300 ), + .UNSPECIFIED. ) ; +#47178 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#47179 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#47180 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725667500, 57.93535825203924400, -28.53896444442201000 ) ) ; +#47181 = VERTEX_POINT ( 'NONE', #37391 ) ; +#47182 = FACE_OUTER_BOUND ( 'NONE', #9138, .T. ) ; +#47183 = EDGE_LOOP ( 'NONE', ( #640, #38132, #69906 ) ) ; +#47184 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47185 = AXIS2_PLACEMENT_3D ( 'NONE', #13193, #38157, #44126 ) ; +#47186 = VERTEX_POINT ( 'NONE', #12695 ) ; +#47187 = ADVANCED_FACE ( 'NONE', ( #58455 ), #73068, .F. ) ; +#47188 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 60.79999999999950700, -28.70555803803047500 ) ) ; +#47189 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650764600, 18.70543520232800100, -28.70555803803025800 ) ) ; +#47190 = ORIENTED_EDGE ( 'NONE', *, *, #42719, .F. ) ; +#47191 = CIRCLE ( 'NONE', #57633, 10.00000000000009400 ) ; +#47192 = CARTESIAN_POINT ( 'NONE', ( -16.99797853026622700, 49.78907435382948400, -28.25433648786267300 ) ) ; +#47193 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#47194 = EDGE_CURVE ( 'NONE', #18262, #21268, #35761, .T. ) ; +#47195 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 66.00000000000000000, -1.205558038030002800 ) ) ; +#47196 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47198 = CARTESIAN_POINT ( 'NONE', ( -7.899665551839509800, 70.79999999999998300, -28.20555803802988100 ) ) ; +#47199 = ORIENTED_EDGE ( 'NONE', *, *, #33679, .T. ) ; +#47200 = TOROIDAL_SURFACE ( 'NONE', #66370, 2.499999999999999600, 5.000000000000000000 ) ; +#47201 = CARTESIAN_POINT ( 'NONE', ( 3.242975574465654100, 90.16517473503375900, -28.29551658696716000 ) ) ; +#47202 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120822000, 61.21901109451851400, -28.33427604305564500 ) ) ; +#47203 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#47204 = ADVANCED_FACE ( 'NONE', ( #25391 ), #39957, .T. ) ; +#47205 = CARTESIAN_POINT ( 'NONE', ( -10.45214241435632600, 9.001892960388930800, -28.65770045238617300 ) ) ; +#47206 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47208 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155515000, 85.79999999999967000, -28.20555803803030800 ) ) ; +#47209 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567155400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#47210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47211 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571447500, 41.52858243452107000, -28.70555803802997700 ) ) ; +#47212 = EDGE_CURVE ( 'NONE', #58782, #40087, #21302, .T. ) ; +#47213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47214 = FACE_OUTER_BOUND ( 'NONE', #33151, .T. ) ; +#47215 = ADVANCED_FACE ( 'NONE', ( #12746 ), #6863, .T. ) ; +#47216 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47217 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47218 = EDGE_LOOP ( 'NONE', ( #26836, #72906, #17705, #71387 ) ) ; +#47219 = FACE_OUTER_BOUND ( 'NONE', #48951, .T. ) ; +#47220 = AXIS2_PLACEMENT_3D ( 'NONE', #26604, #70078, #32822 ) ; +#47221 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47222 = EDGE_CURVE ( 'NONE', #54671, #24408, #56492, .T. ) ; +#47223 = CARTESIAN_POINT ( 'NONE', ( -5.148153789003420600, 85.79999999999998300, -28.37148172714593700 ) ) ; +#47224 = EDGE_CURVE ( 'NONE', #18956, #16262, #6827, .T. ) ; +#47225 = VERTEX_POINT ( 'NONE', #37934 ) ; +#47226 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701700, 42.40456253568395100, -28.61277292027075700 ) ) ; +#47227 = ADVANCED_FACE ( 'NONE', ( #8789 ), #21487, .F. ) ; +#47228 = EDGE_CURVE ( 'NONE', #5959, #71216, #73179, .T. ) ; +#47229 = CIRCLE ( 'NONE', #26570, 10.00000000000009400 ) ; +#47230 = AXIS2_PLACEMENT_3D ( 'NONE', #69631, #32384, #75893 ) ; +#47231 = FACE_OUTER_BOUND ( 'NONE', #56017, .T. ) ; +#47232 = ORIENTED_EDGE ( 'NONE', *, *, #72762, .T. ) ; +#47233 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 79.94924284854670300, -28.20555803803047800 ) ) ; +#47234 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 3.166666666666668700, 1.741883078712356500 ) ) ; +#47235 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51907, #8410, #20967, #64501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634608920000E-007, 0.0007800579090274089200 ), + .UNSPECIFIED. ) ; +#47236 = CIRCLE ( 'NONE', #27095, 9.500000000000099500 ) ; +#47237 = ORIENTED_EDGE ( 'NONE', *, *, #18776, .F. ) ; +#47238 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47239 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36611, #5352, #42591, #80141 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388543157600E-007, 0.0007987676590766488700 ), + .UNSPECIFIED. ) ; +#47240 = ORIENTED_EDGE ( 'NONE', *, *, #41422, .F. ) ; +#47241 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 37.50000000000000700, -4.865812075874393000 ) ) ; +#47242 = AXIS2_PLACEMENT_3D ( 'NONE', #58193, #20964, #64496 ) ; +#47243 = AXIS2_PLACEMENT_3D ( 'NONE', #12061, #80324, #18306 ) ; +#47244 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819203500, 71.65075715145309200, -28.20555803802997700 ) ) ; +#47246 = CIRCLE ( 'NONE', #36313, 9.500000000000101300 ) ; +#47245 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#47247 = EDGE_CURVE ( 'NONE', #23024, #5506, #58685, .T. ) ; +#47248 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 2.500000000000005300, -7.061964498581022400 ) ) ; +#47249 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7256, #50762, #26067, #69554 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143706633600, 0.0006599881756728328600 ), + .UNSPECIFIED. ) ; +#47251 = FACE_OUTER_BOUND ( 'NONE', #3358, .T. ) ; +#47250 = AXIS2_PLACEMENT_3D ( 'NONE', #32872, #57626, #26651 ) ; +#47252 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47253 = EDGE_LOOP ( 'NONE', ( #16460, #38168, #66204, #59921 ) ) ; +#47254 = ORIENTED_EDGE ( 'NONE', *, *, #71709, .T. ) ; +#47255 = CARTESIAN_POINT ( 'NONE', ( 8.912131251683055300, 44.44999999999998900, -3.870056806731016200 ) ) ; +#47256 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462801900, 51.25732391202399200, -28.20555803802997700 ) ) ; +#47257 = ORIENTED_EDGE ( 'NONE', *, *, #80251, .F. ) ; +#47258 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 39.83333333333335000, 9.794441961969999600 ) ) ; +#47259 = CARTESIAN_POINT ( 'NONE', ( -10.95973104149356700, 30.87561462481245300, -28.30309985153375200 ) ) ; +#47260 = ORIENTED_EDGE ( 'NONE', *, *, #23176, .T. ) ; +#47261 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.49747404049751500, -28.26641963845876000 ) ) ; +#47262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47263 = EDGE_LOOP ( 'NONE', ( #9966, #15977, #8661, #77494 ) ) ; +#47264 = EDGE_CURVE ( 'NONE', #50273, #77479, #10774, .T. ) ; +#47265 = FACE_OUTER_BOUND ( 'NONE', #12809, .T. ) ; +#47266 = AXIS2_PLACEMENT_3D ( 'NONE', #77993, #40709, #3443 ) ; +#47267 = ORIENTED_EDGE ( 'NONE', *, *, #42343, .T. ) ; +#47268 = AXIS2_PLACEMENT_3D ( 'NONE', #36493, #67529, #73792 ) ; +#47269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #808, #44300, #19606, #63127 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402316400 ), + .UNSPECIFIED. ) ; +#47270 = ORIENTED_EDGE ( 'NONE', *, *, #8451, .T. ) ; +#47271 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#47272 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#47273 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385600, 60.16349705304866500, -28.30782889147482400 ) ) ; +#47274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47275 = CIRCLE ( 'NONE', #74810, 9.500000000000099500 ) ; +#47276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47277 = ORIENTED_EDGE ( 'NONE', *, *, #16423, .F. ) ; +#47278 = CONICAL_SURFACE ( 'NONE', #41791, 10.00000000000009200, 0.7853981633974447300 ) ; +#47279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47280 = AXIS2_PLACEMENT_3D ( 'NONE', #58069, #20815, #64373 ) ; +#47281 = CARTESIAN_POINT ( 'NONE', ( -5.304802448022819300, 8.955760754971620900, -28.65273796500219900 ) ) ; +#47282 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528131800, 30.96868088498121800, -28.51286550264512000 ) ) ; +#47283 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24322, #61592, #42788, #36799 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653077400 ), + .UNSPECIFIED. ) ; +#47284 = VERTEX_POINT ( 'NONE', #38459 ) ; +#47285 = ADVANCED_FACE ( 'NONE', ( #37984 ), #7468, .T. ) ; +#47286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47287 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#47288 = AXIS2_PLACEMENT_3D ( 'NONE', #40491, #3215, #46721 ) ; +#47289 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 43.33333333333334300, -8.133761268305512700 ) ) ; +#47290 = FACE_OUTER_BOUND ( 'NONE', #49389, .T. ) ; +#47291 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-014, 12.15857157145694100, -28.20555803802994200 ) ) ; +#47292 = ORIENTED_EDGE ( 'NONE', *, *, #72049, .T. ) ; +#47293 = FACE_OUTER_BOUND ( 'NONE', #29535, .T. ) ; +#47294 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47295 = EDGE_LOOP ( 'NONE', ( #56641, #48157, #11636, #37992 ) ) ; +#47296 = CIRCLE ( 'NONE', #10292, 10.00000000000009200 ) ; +#47297 = ADVANCED_FACE ( 'NONE', ( #23417 ), #36062, .F. ) ; +#47298 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280700, 51.25732391202398500, -28.20555803802997700 ) ) ; +#47299 = AXIS2_PLACEMENT_3D ( 'NONE', #9213, #52744, #15504 ) ; +#47300 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#47301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47302 = CARTESIAN_POINT ( 'NONE', ( 1.781678525564349700, 57.14999999999997000, 6.779723305202158400 ) ) ; +#47303 = CARTESIAN_POINT ( 'NONE', ( 2.133709875451472700E-013, 78.62623792124918500, -28.70555803802997700 ) ) ; +#47304 = ORIENTED_EDGE ( 'NONE', *, *, #23147, .T. ) ; +#47305 = CONICAL_SURFACE ( 'NONE', #74454, 10.50000000000009600, 0.7853981633974500600 ) ; +#47306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47307 = CONICAL_SURFACE ( 'NONE', #11580, 10.00000000000009200, 0.7853981633974447300 ) ; +#47308 = EDGE_LOOP ( 'NONE', ( #7864, #77924, #49355, #32919 ) ) ; +#47309 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 55.66666666666667900, -5.205558038030003100 ) ) ; +#47310 = ADVANCED_FACE ( 'NONE', ( #54548 ), #2954, .F. ) ; +#47311 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655604300, 20.67701665379236100, -28.20555803802994500 ) ) ; +#47312 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47314 = EDGE_LOOP ( 'NONE', ( #44967, #34151, #78377 ) ) ; +#47313 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466625000, 30.26893971291459100, -28.57333386111660900 ) ) ; +#47315 = ADVANCED_FACE ( 'NONE', ( #52581 ), #50619, .T. ) ; +#47316 = CARTESIAN_POINT ( 'NONE', ( -17.37150777124396900, 61.43250300240229200, -28.25053031809458700 ) ) ; +#47317 = EDGE_LOOP ( 'NONE', ( #37191, #27927, #25524, #17529 ) ) ; +#47318 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 101.5999999999999900, 16.29444196196998700 ) ) ; +#47319 = ADVANCED_FACE ( 'NONE', ( #19520 ), #17575, .T. ) ; +#47320 = FACE_OUTER_BOUND ( 'NONE', #57455, .T. ) ; +#47321 = VERTEX_POINT ( 'NONE', #38998 ) ; +#47322 = EDGE_CURVE ( 'NONE', #1001, #24306, #67210, .T. ) ; +#47323 = ORIENTED_EDGE ( 'NONE', *, *, #36630, .T. ) ; +#47324 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459539800, 69.08026449164330500, -28.70555803803006300 ) ) ; +#47325 = ORIENTED_EDGE ( 'NONE', *, *, #37703, .F. ) ; +#47326 = ORIENTED_EDGE ( 'NONE', *, *, #10198, .F. ) ; +#47327 = EDGE_CURVE ( 'NONE', #78096, #32442, #44174, .T. ) ; +#47328 = ORIENTED_EDGE ( 'NONE', *, *, #24637, .T. ) ; +#47329 = EDGE_LOOP ( 'NONE', ( #47499, #6206, #66967 ) ) ; +#47330 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.65857157145700300, -28.20555803802997700 ) ) ; +#47331 = CONICAL_SURFACE ( 'NONE', #37493, 10.00000000000009600, 0.7853981633974447300 ) ; +#47332 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 11.83333333333334600, -2.545304000185615800 ) ) ; +#47333 = ORIENTED_EDGE ( 'NONE', *, *, #41066, .T. ) ; +#47334 = EDGE_CURVE ( 'NONE', #73124, #10656, #29812, .T. ) ; +#47335 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#47336 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47337 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 52.00000000000001400, -1.205558038030005300 ) ) ; +#47338 = EDGE_CURVE ( 'NONE', #22200, #46133, #75007, .T. ) ; +#47340 = ORIENTED_EDGE ( 'NONE', *, *, #73109, .F. ) ; +#47339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42524, #50121, #56405, #19154 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459156297734600E-007, 0.0007679767755142042500 ), + .UNSPECIFIED. ) ; +#47341 = CIRCLE ( 'NONE', #29463, 9.500000000000099500 ) ; +#47342 = AXIS2_PLACEMENT_3D ( 'NONE', #37134, #80675, #43391 ) ; +#47343 = ORIENTED_EDGE ( 'NONE', *, *, #8875, .F. ) ; +#47344 = ORIENTED_EDGE ( 'NONE', *, *, #16649, .F. ) ; +#47345 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47346 = FACE_OUTER_BOUND ( 'NONE', #18952, .T. ) ; +#47347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47349 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285715300, 53.67681279774500800, -28.70555803802997700 ) ) ; +#47348 = CIRCLE ( 'NONE', #17316, 9.500000000000097700 ) ; +#47350 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47351 = AXIS2_PLACEMENT_3D ( 'NONE', #65642, #28414, #71898 ) ; +#47352 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35567, #72819, #48013, #10798 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711422351500E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#47353 = EDGE_CURVE ( 'NONE', #23109, #9070, #4912, .T. ) ; +#47354 = CARTESIAN_POINT ( 'NONE', ( 15.07025710783656100, 9.859485784326881900, -28.70457077705549100 ) ) ; +#47356 = ORIENTED_EDGE ( 'NONE', *, *, #48044, .F. ) ; +#47355 = EDGE_CURVE ( 'NONE', #54616, #19038, #71102, .T. ) ; +#47357 = EDGE_CURVE ( 'NONE', #70214, #14453, #34116, .T. ) ; +#47358 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 39.69949493661176400, -28.70555803802995200 ) ) ; +#47360 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205881200, 18.08245724453600900, -28.27504145778802800 ) ) ; +#47359 = AXIS2_PLACEMENT_3D ( 'NONE', #77675, #71985, #34710 ) ; +#47361 = AXIS2_PLACEMENT_3D ( 'NONE', #36598, #80125, #42857 ) ; +#47362 = FACE_OUTER_BOUND ( 'NONE', #21602, .T. ) ; +#47363 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 36.92318720225497900, -28.70555803802995200 ) ) ; +#47364 = ORIENTED_EDGE ( 'NONE', *, *, #79300, .F. ) ; +#47365 = CARTESIAN_POINT ( 'NONE', ( -9.198586935028780300, 94.72249899919931700, -28.20555803802997700 ) ) ; +#47366 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 17.97246552159106500, -28.38801640354855800 ) ) ; +#47367 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60004, #16480, #72511, #35261 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671386723100E-007, 0.0007670610367942118600 ), + .UNSPECIFIED. ) ; +#47368 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274716100, 35.04999999999996900, -28.20555803802995200 ) ) ; +#47369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47370 = VERTEX_POINT ( 'NONE', #52039 ) ; +#47371 = AXIS2_PLACEMENT_3D ( 'NONE', #57531, #20268, #63806 ) ; +#47372 = ORIENTED_EDGE ( 'NONE', *, *, #19015, .T. ) ; +#47373 = EDGE_CURVE ( 'NONE', #359, #77979, #993, .T. ) ; +#47374 = ORIENTED_EDGE ( 'NONE', *, *, #18335, .T. ) ; +#47375 = FACE_OUTER_BOUND ( 'NONE', #60454, .T. ) ; +#47376 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670953600, 21.15863441772060900, -28.48677465922828100 ) ) ; +#47377 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#47378 = AXIS2_PLACEMENT_3D ( 'NONE', #38492, #1260, #44738 ) ; +#47379 = AXIS2_PLACEMENT_3D ( 'NONE', #3039, #71327, #34068 ) ; +#47380 = CARTESIAN_POINT ( 'NONE', ( -17.24374921994469300, 60.98711723699935300, -28.45058723417198400 ) ) ; +#47381 = ORIENTED_EDGE ( 'NONE', *, *, #5337, .F. ) ; +#47382 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61623, #49313, #12098, #55593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061614900E-007, 0.001119323292485714000 ), + .UNSPECIFIED. ) ; +#47383 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450100, 65.47903320442294700, -28.36604143581858800 ) ) ; +#47384 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47386 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853733700, 61.25732391202370800, -28.20555803803030800 ) ) ; +#47387 = CIRCLE ( 'NONE', #44251, 10.00000000000009200 ) ; +#47388 = ORIENTED_EDGE ( 'NONE', *, *, #73238, .T. ) ; +#47389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47390 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309789700, 85.79999999999996900, -28.70555803802997700 ) ) ; +#47391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47392 = AXIS2_PLACEMENT_3D ( 'NONE', #27482, #70970, #33711 ) ; +#47393 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515423400, 71.01872124563918500, -28.53757464917569900 ) ) ; +#47394 = ORIENTED_EDGE ( 'NONE', *, *, #32686, .T. ) ; +#47395 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 61.43945992495533700, -28.34042301926885800 ) ) ; +#47396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47397 = FACE_OUTER_BOUND ( 'NONE', #19871, .T. ) ; +#47398 = CONICAL_SURFACE ( 'NONE', #78288, 10.00000000000009200, 0.7853981633974447300 ) ; +#47399 = AXIS2_PLACEMENT_3D ( 'NONE', #77780, #46467, #71535 ) ; +#47400 = EDGE_LOOP ( 'NONE', ( #69139, #67364, #77594, #41124 ) ) ; +#47401 = ORIENTED_EDGE ( 'NONE', *, *, #65764, .F. ) ; +#47402 = ORIENTED_EDGE ( 'NONE', *, *, #30733, .F. ) ; +#47403 = ORIENTED_EDGE ( 'NONE', *, *, #37831, .F. ) ; +#47404 = ORIENTED_EDGE ( 'NONE', *, *, #25212, .F. ) ; +#47405 = ADVANCED_FACE ( 'NONE', ( #48668 ), #46718, .F. ) ; +#47406 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 58.00000000000000700, -9.205558038030005700 ) ) ; +#47407 = AXIS2_PLACEMENT_3D ( 'NONE', #51282, #14082, #57583 ) ; +#47408 = ORIENTED_EDGE ( 'NONE', *, *, #40670, .F. ) ; +#47409 = ORIENTED_EDGE ( 'NONE', *, *, #3764, .F. ) ; +#47410 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 60.37705528805136600, -28.20555803802997700 ) ) ; +#47411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27488, #8672, #33722, #77233 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388206713500E-007, 0.0007987676590764765900 ), + .UNSPECIFIED. ) ; +#47412 = CARTESIAN_POINT ( 'NONE', ( 3.959731041493853800, 9.875614624812477900, -28.30309985153383000 ) ) ; +#47413 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489758300, 18.15930907398603000, -28.35186440610867500 ) ) ; +#47414 = ADVANCED_FACE ( 'NONE', ( #79854 ), #13692, .F. ) ; +#47415 = EDGE_CURVE ( 'NONE', #38494, #35598, #15307, .T. ) ; +#47416 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47417 = FACE_OUTER_BOUND ( 'NONE', #4989, .T. ) ; +#47418 = EDGE_LOOP ( 'NONE', ( #52178, #30526, #4492 ) ) ; +#47419 = AXIS2_PLACEMENT_3D ( 'NONE', #69374, #50846, #25882 ) ; +#47420 = EDGE_LOOP ( 'NONE', ( #47816, #20560, #72822 ) ) ; +#47421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47422 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448997100, 52.16666666666666400, 6.794441961969993400 ) ) ; +#47423 = ORIENTED_EDGE ( 'NONE', *, *, #62541, .F. ) ; +#47424 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 44.37738371066728100, -28.70555803802997700 ) ) ; +#47425 = CIRCLE ( 'NONE', #38603, 10.50000000000009800 ) ; +#47426 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387502900, 76.46717019299428800, -28.53914313452786200 ) ) ; +#47427 = VERTEX_POINT ( 'NONE', #58593 ) ; +#47428 = ADVANCED_FACE ( 'NONE', ( #15621 ), #61381, .F. ) ; +#47429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47431 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#47432 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 29.33333333333333900, 8.320721403598817300 ) ) ; +#47433 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146665600, 38.80869142985029900, -28.37223374938520600 ) ) ; +#47434 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537349100, 61.25732391202402700, -28.20555803802997700 ) ) ; +#47435 = EDGE_CURVE ( 'NONE', #15774, #46838, #77901, .T. ) ; +#47436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47437 = CONICAL_SURFACE ( 'NONE', #72949, 10.00000000000009400, 0.7853981633974447300 ) ; +#47438 = EDGE_LOOP ( 'NONE', ( #77723, #55616, #29241 ) ) ; +#47439 = EDGE_CURVE ( 'NONE', #54382, #48317, #30240, .T. ) ; +#47440 = ORIENTED_EDGE ( 'NONE', *, *, #76811, .F. ) ; +#47441 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 39.07141756547892400, -28.70555803802995200 ) ) ; +#47442 = CARTESIAN_POINT ( 'NONE', ( -12.13892652743401800, 8.993745444280872200, -28.65599007511346500 ) ) ; +#47443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47444 = CIRCLE ( 'NONE', #27958, 10.50000000000009800 ) ; +#47445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63430, #44859, #63701, #26446 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005926489308900E-007, 0.0004431156063178056400 ), + .UNSPECIFIED. ) ; +#47446 = EDGE_CURVE ( 'NONE', #47732, #53604, #65295, .T. ) ; +#47447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47448 = EDGE_CURVE ( 'NONE', #53013, #2565, #820, .T. ) ; +#47449 = AXIS2_PLACEMENT_3D ( 'NONE', #784, #13071, #38038 ) ; +#47450 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47451 = CONICAL_SURFACE ( 'NONE', #3053, 10.00000000000009200, 0.7853981633974447300 ) ; +#47452 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 63.83333333333332100, -2.545304000185615800 ) ) ; +#47453 = ORIENTED_EDGE ( 'NONE', *, *, #79312, .T. ) ; +#47454 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661468400, 38.99322649091134700, -28.30799595738869800 ) ) ; +#47455 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47456 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116431600, 41.39435118792236100, -28.41114655922302000 ) ) ; +#47457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55329, #74134, #12107, #8056 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782919200, 0.0004366687057310654100 ), + .UNSPECIFIED. ) ; +#47458 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47460 = ORIENTED_EDGE ( 'NONE', *, *, #39753, .F. ) ; +#47461 = PLANE ( 'NONE', #28625 ) ; +#47462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47463 = AXIS2_PLACEMENT_3D ( 'NONE', #77778, #40515, #3236 ) ; +#47464 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#47465 = EDGE_CURVE ( 'NONE', #50540, #65965, #67174, .T. ) ; +#47466 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 51.78933626866496800, -28.53923937255172700 ) ) ; +#47467 = EDGE_CURVE ( 'NONE', #78759, #5527, #69147, .T. ) ; +#47468 = EDGE_CURVE ( 'NONE', #9060, #49022, #63320, .T. ) ; +#47469 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.46443389862715600, -28.54207364681943600 ) ) ; +#47470 = CIRCLE ( 'NONE', #23309, 10.00000000000009600 ) ; +#47471 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#47472 = CONICAL_SURFACE ( 'NONE', #41212, 10.00000000000009400, 0.7853981633974447300 ) ; +#47473 = CARTESIAN_POINT ( 'NONE', ( -8.526184559857295400, 50.54999999999999700, -28.54256287284160700 ) ) ; +#47474 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .T. ) ; +#47475 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909500, 64.83849307182684600, -28.68631150211663100 ) ) ; +#47476 = PLANE ( 'NONE', #64006 ) ; +#47477 = VERTEX_POINT ( 'NONE', #9344 ) ; +#47478 = AXIS2_PLACEMENT_3D ( 'NONE', #67733, #36711, #48932 ) ; +#47479 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 28.42298334620784700, -28.20555803802994200 ) ) ; +#47480 = ORIENTED_EDGE ( 'NONE', *, *, #27493, .F. ) ; +#47481 = EDGE_LOOP ( 'NONE', ( #32911, #58732, #13888, #68199 ) ) ; +#47482 = ORIENTED_EDGE ( 'NONE', *, *, #17236, .F. ) ; +#47483 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754700, 50.20543520232829600, -28.70555803802996700 ) ) ; +#47484 = VERTEX_POINT ( 'NONE', #28444 ) ; +#47485 = ORIENTED_EDGE ( 'NONE', *, *, #55916, .F. ) ; +#47486 = ORIENTED_EDGE ( 'NONE', *, *, #28228, .F. ) ; +#47487 = ORIENTED_EDGE ( 'NONE', *, *, #46738, .T. ) ; +#47488 = CARTESIAN_POINT ( 'NONE', ( -17.41531457165532600, 51.18368596002119400, -28.40988208712491300 ) ) ; +#47489 = EDGE_CURVE ( 'NONE', #15678, #23119, #52686, .T. ) ; +#47490 = AXIS2_PLACEMENT_3D ( 'NONE', #80073, #67561, #11819 ) ; +#47491 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47492 = VERTEX_POINT ( 'NONE', #65947 ) ; +#47493 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47494 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47495 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 71.46283204837338600, -28.48697406221667400 ) ) ; +#47496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54385, #35905, #54660, #17411 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704003905000 ), + .UNSPECIFIED. ) ; +#47497 = ADVANCED_FACE ( 'NONE', ( #28302 ), #26333, .T. ) ; +#47498 = FACE_OUTER_BOUND ( 'NONE', #6150, .T. ) ; +#47499 = ORIENTED_EDGE ( 'NONE', *, *, #68721, .T. ) ; +#47501 = ORIENTED_EDGE ( 'NONE', *, *, #70376, .T. ) ; +#47500 = CARTESIAN_POINT ( 'NONE', ( 2.198586935028790500, 94.72249899919930300, -28.20555803802997700 ) ) ; +#47502 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345602500, 71.52472935029902600, -28.39317435246123700 ) ) ; +#47503 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571355100, 10.02858243452107900, -28.70555803802994200 ) ) ; +#47504 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 1.000000000000014400, -1.205558038030002800 ) ) ; +#47505 = EDGE_LOOP ( 'NONE', ( #43481, #54077, #58770, #73320 ) ) ; +#47506 = ORIENTED_EDGE ( 'NONE', *, *, #25730, .F. ) ; +#47507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47508 = CIRCLE ( 'NONE', #28200, 10.00000000000009200 ) ; +#47509 = ADVANCED_FACE ( 'NONE', ( #44741 ), #74013, .T. ) ; +#47510 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 35.33333333333332900, 1.294441961969997200 ) ) ; +#47511 = AXIS2_PLACEMENT_3D ( 'NONE', #29500, #72988, #35721 ) ; +#47512 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47513 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#47514 = VERTEX_POINT ( 'NONE', #22686 ) ; +#47515 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64142, #20873, #39617, #2332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648675523200E-007, 0.0007596411030278579700 ), + .UNSPECIFIED. ) ; +#47516 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 0.3333333333333382600, 2.794441961969998300 ) ) ; +#47517 = AXIS2_PLACEMENT_3D ( 'NONE', #34192, #77697, #40435 ) ; +#47518 = CARTESIAN_POINT ( 'NONE', ( 9.621978672527612600, 18.13131911501838900, -28.51286550264558900 ) ) ; +#47519 = CONICAL_SURFACE ( 'NONE', #69251, 10.00000000000009600, 0.7853981633974482800 ) ; +#47520 = ORIENTED_EDGE ( 'NONE', *, *, #6162, .T. ) ; +#47521 = CARTESIAN_POINT ( 'NONE', ( 4.209962487834123300, 44.44999999999998900, -9.712241114896670500 ) ) ; +#47522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47523 = EDGE_CURVE ( 'NONE', #62098, #27421, #9766, .T. ) ; +#47524 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 37.66666666666667100, -10.73183747965883100 ) ) ; +#47525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47526 = AXIS2_PLACEMENT_3D ( 'NONE', #36032, #48494, #29814 ) ; +#47527 = EDGE_LOOP ( 'NONE', ( #19359, #30759, #19927 ) ) ; +#47528 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489073400, 30.62856921007284000, -28.37063977681167500 ) ) ; +#47529 = ORIENTED_EDGE ( 'NONE', *, *, #66449, .F. ) ; +#47530 = AXIS2_PLACEMENT_3D ( 'NONE', #19334, #63142, #75370 ) ; +#47531 = CARTESIAN_POINT ( 'NONE', ( -17.38218670428379300, 20.70504786954614900, -28.41843566569994200 ) ) ; +#47532 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 90.51916201875609100, -28.45106778992441600 ) ) ; +#47533 = ADVANCED_FACE ( 'NONE', ( #42832 ), #24360, .F. ) ; +#47534 = CARTESIAN_POINT ( 'NONE', ( -1.824833689540994200E-013, 74.13556610137268900, -28.54207364681948500 ) ) ; +#47535 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 60.37705528805136600, -28.20555803802997700 ) ) ; +#47536 = AXIS2_PLACEMENT_3D ( 'NONE', #68739, #31495, #75000 ) ; +#47537 = CONICAL_SURFACE ( 'NONE', #7696, 10.00000000000009400, 0.7853981633974447300 ) ; +#47538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47539 = CIRCLE ( 'NONE', #56215, 10.50000000000009600 ) ; +#47540 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#47541 = ORIENTED_EDGE ( 'NONE', *, *, #66313, .F. ) ; +#47542 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34272, #71532, #28053, #40513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520725200, 0.004414519045341042100 ), + .UNSPECIFIED. ) ; +#47543 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890814900, 81.10236277681491400, -28.32100408376073700 ) ) ; +#47545 = ORIENTED_EDGE ( 'NONE', *, *, #32649, .F. ) ; +#47544 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47546 = CARTESIAN_POINT ( 'NONE', ( 15.24268566510272600, 9.878657167448636800, -28.70261278770272600 ) ) ; +#47547 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#47548 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492421100, 18.70543520232829600, -28.70555803802992800 ) ) ; +#47549 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610911400, 61.10236277681499900, -28.32100408376066300 ) ) ; +#47550 = CONICAL_SURFACE ( 'NONE', #52958, 10.00000000000009600, 0.7853981633974482800 ) ; +#47551 = CARTESIAN_POINT ( 'NONE', ( 15.68514033016295400, 24.54999999999999700, -28.35375031073496300 ) ) ; +#47552 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707914000, 51.66410593583241000, -28.68054222049963200 ) ) ; +#47553 = ORIENTED_EDGE ( 'NONE', *, *, #9372, .F. ) ; +#47554 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567156700, 41.24660241562189400, -28.20555803802996700 ) ) ; +#47555 = PLANE ( 'NONE', #43686 ) ; +#47556 = FACE_OUTER_BOUND ( 'NONE', #11631, .T. ) ; +#47557 = ORIENTED_EDGE ( 'NONE', *, *, #23448, .T. ) ; +#47558 = ORIENTED_EDGE ( 'NONE', *, *, #49486, .F. ) ; +#47559 = EDGE_CURVE ( 'NONE', #43512, #61277, #38212, .T. ) ; +#47560 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 41.16666666666665700, 6.794441961969992500 ) ) ; +#47561 = VERTEX_POINT ( 'NONE', #22949 ) ; +#47562 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609190500, 46.18533208989813200, -28.53910738522649400 ) ) ; +#47563 = CIRCLE ( 'NONE', #80417, 10.50000000000009600 ) ; +#47564 = EDGE_CURVE ( 'NONE', #44613, #65265, #11728, .T. ) ; +#47565 = ORIENTED_EDGE ( 'NONE', *, *, #46629, .T. ) ; +#47567 = ORIENTED_EDGE ( 'NONE', *, *, #36046, .F. ) ; +#47566 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#47568 = EDGE_LOOP ( 'NONE', ( #61033, #39314, #42058, #46599 ) ) ; +#47569 = ORIENTED_EDGE ( 'NONE', *, *, #25773, .F. ) ; +#47570 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971600, 76.44146991525258300, -28.52629299565627000 ) ) ; +#47571 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811119300, 87.05460903980933600, -28.69802137271995300 ) ) ; +#47573 = VERTEX_POINT ( 'NONE', #4443 ) ; +#47572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47574 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#47575 = CARTESIAN_POINT ( 'NONE', ( -2.849596282825071800, 57.15000000000107100, 7.313501243132336100 ) ) ; +#47576 = EDGE_CURVE ( 'NONE', #1355, #72649, #23793, .T. ) ; +#47577 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#47578 = FACE_OUTER_BOUND ( 'NONE', #22604, .T. ) ; +#47579 = EDGE_LOOP ( 'NONE', ( #58425, #38670, #2376, #40627 ) ) ; +#47580 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265474400, 60.27440177985813800, -28.29986836858017800 ) ) ; +#47581 = EDGE_CURVE ( 'NONE', #41971, #58896, #9292, .T. ) ; +#47583 = EDGE_CURVE ( 'NONE', #52332, #76520, #59407, .T. ) ; +#47582 = EDGE_LOOP ( 'NONE', ( #19192, #27174, #123 ) ) ; +#47584 = ORIENTED_EDGE ( 'NONE', *, *, #41467, .T. ) ; +#47585 = ORIENTED_EDGE ( 'NONE', *, *, #9263, .F. ) ; +#47586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47587 = ORIENTED_EDGE ( 'NONE', *, *, #78592, .T. ) ; +#47588 = CARTESIAN_POINT ( 'NONE', ( -19.14811158683254200, 7.926544602556333500, -27.80869628470563300 ) ) ; +#47589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47590 = CONICAL_SURFACE ( 'NONE', #63573, 10.00000000000009400, 0.7853981633974447300 ) ; +#47591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47593 = AXIS2_PLACEMENT_3D ( 'NONE', #51105, #14179, #7894 ) ; +#47594 = EDGE_CURVE ( 'NONE', #15003, #56207, #75932, .T. ) ; +#47595 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#47596 = EDGE_CURVE ( 'NONE', #28497, #71618, #75623, .T. ) ; +#47597 = EDGE_CURVE ( 'NONE', #46762, #15678, #61203, .T. ) ; +#47598 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338521300, 49.49322649091141100, -28.30799595738882200 ) ) ; +#47599 = VERTEX_POINT ( 'NONE', #17515 ) ; +#47600 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30997, #49439, #18744, #62264 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746978183091386100E-007, 0.0002745255138925571600 ), + .UNSPECIFIED. ) ; +#47601 = ADVANCED_FACE ( 'NONE', ( #40901 ), #22413, .F. ) ; +#47602 = AXIS2_PLACEMENT_3D ( 'NONE', #11524, #55013, #17774 ) ; +#47603 = CIRCLE ( 'NONE', #22308, 10.00000000000009200 ) ; +#47604 = ORIENTED_EDGE ( 'NONE', *, *, #7497, .T. ) ; +#47605 = VERTEX_POINT ( 'NONE', #42496 ) ; +#47606 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47607 = ADVANCED_FACE ( 'NONE', ( #72068 ), #70067, .T. ) ; +#47608 = AXIS2_PLACEMENT_3D ( 'NONE', #39676, #2403, #45899 ) ; +#47609 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 9.666666666666667900, 1.294441961969997200 ) ) ; +#47610 = AXIS2_PLACEMENT_3D ( 'NONE', #10467, #16718, #47685 ) ; +#47611 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 49.83333333333335000, 0.9380355014189731800 ) ) ; +#47612 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730465800, 51.58737389638867700, -28.29936525552431800 ) ) ; +#47613 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47614 = CIRCLE ( 'NONE', #29115, 9.500000000000099500 ) ; +#47615 = ADVANCED_FACE ( 'NONE', ( #7773 ), #36975, .F. ) ; +#47616 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 23.37738371066728500, -28.70555803802995200 ) ) ; +#47617 = CIRCLE ( 'NONE', #58252, 10.00000000000009400 ) ; +#47618 = EDGE_LOOP ( 'NONE', ( #41101, #72362, #77016, #47667 ) ) ; +#47619 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500259100, 81.76337688193812900, -28.37223523914886100 ) ) ; +#47620 = CARTESIAN_POINT ( 'NONE', ( -15.24268566510272300, 9.878657167448636800, -28.70261278770272600 ) ) ; +#47621 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715200, 20.24660241562189000, -28.20555803802994200 ) ) ; +#47622 = AXIS2_PLACEMENT_3D ( 'NONE', #52458, #2692, #39983 ) ; +#47623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47624 = ORIENTED_EDGE ( 'NONE', *, *, #67888, .T. ) ; +#47625 = EDGE_CURVE ( 'NONE', #29328, #62131, #46681, .T. ) ; +#47626 = CARTESIAN_POINT ( 'NONE', ( 14.05953275178618100, 9.743257667615466700, -28.70293744553715600 ) ) ; +#47627 = ADVANCED_FACE ( 'NONE', ( #38922 ), #24031, .T. ) ; +#47628 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47630 = CIRCLE ( 'NONE', #49251, 10.00000000000009200 ) ; +#47632 = ORIENTED_EDGE ( 'NONE', *, *, #28368, .F. ) ; +#47631 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648400, 28.58087956867533200, -28.30223257055580900 ) ) ; +#47633 = CIRCLE ( 'NONE', #42150, 9.500000000000099500 ) ; +#47634 = ORIENTED_EDGE ( 'NONE', *, *, #28829, .T. ) ; +#47635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47636 = EDGE_CURVE ( 'NONE', #19507, #5132, #32256, .T. ) ; +#47637 = CIRCLE ( 'NONE', #58480, 10.00000000000009400 ) ; +#47638 = ORIENTED_EDGE ( 'NONE', *, *, #14721, .T. ) ; +#47639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47640 = AXIS2_PLACEMENT_3D ( 'NONE', #1295, #32326, #44773 ) ; +#47641 = ORIENTED_EDGE ( 'NONE', *, *, #11763, .T. ) ; +#47642 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63881, #20347, #57605, #70096 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983720959801700E-007, 0.001076779618376950100 ), + .UNSPECIFIED. ) ; +#47643 = VERTEX_POINT ( 'NONE', #80317 ) ; +#47644 = ORIENTED_EDGE ( 'NONE', *, *, #64698, .T. ) ; +#47645 = EDGE_LOOP ( 'NONE', ( #68546, #53369, #29272 ) ) ; +#47646 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287000, 45.23212903577621100, -28.37244029424745400 ) ) ; +#47647 = ORIENTED_EDGE ( 'NONE', *, *, #19628, .F. ) ; +#47648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47649 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47650 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528143800, 41.46868088498121800, -28.51286550264512700 ) ) ; +#47651 = ORIENTED_EDGE ( 'NONE', *, *, #46857, .F. ) ; +#47652 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.66749699759768100, -28.20555803802996700 ) ) ; +#47653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47654 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 65.79999999999982700, -28.20555803803014400 ) ) ; +#47655 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195940100, 26.44142842854297000, -28.37229765499279200 ) ) ; +#47656 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47657 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900948700, 41.53732497909462000, -28.41043597897463300 ) ) ; +#47658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47659 = CONICAL_SURFACE ( 'NONE', #77639, 10.50000000000009600, 0.7853981633974518300 ) ; +#47660 = AXIS2_PLACEMENT_3D ( 'NONE', #31523, #6744, #50239 ) ; +#47661 = ORIENTED_EDGE ( 'NONE', *, *, #35415, .T. ) ; +#47662 = VERTEX_POINT ( 'NONE', #61565 ) ; +#47663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47664 = ORIENTED_EDGE ( 'NONE', *, *, #15046, .F. ) ; +#47665 = VERTEX_POINT ( 'NONE', #43027 ) ; +#47666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47667 = ORIENTED_EDGE ( 'NONE', *, *, #80754, .T. ) ; +#47668 = ORIENTED_EDGE ( 'NONE', *, *, #38767, .T. ) ; +#47669 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47670 = CARTESIAN_POINT ( 'NONE', ( -10.97683272551927500, 28.58088969930761500, -28.30223898143234300 ) ) ; +#47671 = CONICAL_SURFACE ( 'NONE', #46203, 10.00000000000009600, 0.7853981633974447300 ) ; +#47672 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47674 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466629300, 39.83106028708537800, -28.57333386111660200 ) ) ; +#47675 = ORIENTED_EDGE ( 'NONE', *, *, #52608, .F. ) ; +#47676 = AXIS2_PLACEMENT_3D ( 'NONE', #52715, #15487, #58985 ) ; +#47677 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47678 = EDGE_LOOP ( 'NONE', ( #30846, #73363, #16216, #25699 ) ) ; +#47679 = EDGE_CURVE ( 'NONE', #998, #26683, #57447, .T. ) ; +#47680 = CIRCLE ( 'NONE', #64523, 9.500000000000099500 ) ; +#47681 = EDGE_LOOP ( 'NONE', ( #37326, #9032, #51396, #67066, #30611, #24455 ) ) ; +#47682 = ORIENTED_EDGE ( 'NONE', *, *, #70226, .T. ) ; +#47683 = VERTEX_POINT ( 'NONE', #49268 ) ; +#47684 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 55.83333333333334300, 6.794441961969992500 ) ) ; +#47685 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47686 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510923400, 20.12856921007281500, -28.37063977681168900 ) ) ; +#47687 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284931400, 41.32033471810044000, -28.30868034705252600 ) ) ; +#47688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36107, #73378, #48572, #11366, #54854, #17618 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002025992967437394800, 0.004051985934874789700 ), + .UNSPECIFIED. ) ; +#47689 = ADVANCED_FACE ( 'NONE', ( #32166 ), #51549, .T. ) ; +#47690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47691 = EDGE_CURVE ( 'NONE', #51058, #45054, #17806, .T. ) ; +#47693 = EDGE_CURVE ( 'NONE', #31957, #11263, #3308, .T. ) ; +#47692 = CIRCLE ( 'NONE', #10969, 10.50000000000009600 ) ; +#47694 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609197200, 13.41466791010193500, -28.53910738522641900 ) ) ; +#47695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77192, #39927, #46145, #8886 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210958100, 0.001517199873936108900 ), + .UNSPECIFIED. ) ; +#47696 = VERTEX_POINT ( 'NONE', #18569 ) ; +#47697 = VERTEX_POINT ( 'NONE', #31097 ) ; +#47698 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66742, #10717, #73000, #35730 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799282739100E-007, 0.0005050252131287556200 ), + .UNSPECIFIED. ) ; +#47699 = ADVANCED_FACE ( 'NONE', ( #3897 ), #18500, .T. ) ; +#47700 = AXIS2_PLACEMENT_3D ( 'NONE', #67516, #42472, #24016 ) ; +#47701 = EDGE_CURVE ( 'NONE', #47573, #68363, #69633, .T. ) ; +#47702 = EDGE_CURVE ( 'NONE', #74656, #20451, #55178, .T. ) ; +#47703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47704 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 27.16666666666667500, -12.20555803803000000 ) ) ; +#47705 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6498, #18752, #31271, #49979 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192576680500 ), + .UNSPECIFIED. ) ; +#47706 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47707 = CONICAL_SURFACE ( 'NONE', #3884, 10.50000000000009800, 0.7853981633974500600 ) ; +#47709 = ORIENTED_EDGE ( 'NONE', *, *, #14742, .T. ) ; +#47708 = EDGE_CURVE ( 'NONE', #74434, #38012, #40715, .T. ) ; +#47710 = VERTEX_POINT ( 'NONE', #25091 ) ; +#47711 = AXIS2_PLACEMENT_3D ( 'NONE', #53746, #53491, #22751 ) ; +#47712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47713 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#47714 = ADVANCED_FACE ( 'NONE', ( #68134 ), #66209, .T. ) ; +#47715 = ORIENTED_EDGE ( 'NONE', *, *, #41998, .F. ) ; +#47716 = CIRCLE ( 'NONE', #25617, 10.50000000000009600 ) ; +#47717 = VERTEX_POINT ( 'NONE', #68870 ) ; +#47718 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47719 = ORIENTED_EDGE ( 'NONE', *, *, #43899, .F. ) ; +#47720 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47721 = ORIENTED_EDGE ( 'NONE', *, *, #61501, .T. ) ; +#47722 = CARTESIAN_POINT ( 'NONE', ( -16.88108227420125100, 51.10238820582982600, -28.32098513914462100 ) ) ; +#47723 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47724 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300879800, 58.40378923506980200, -28.61864990621753100 ) ) ; +#47725 = ADVANCED_FACE ( 'NONE', ( #35081 ), #33088, .T. ) ; +#47726 = EDGE_LOOP ( 'NONE', ( #66274, #75295, #20546 ) ) ; +#47727 = AXIS2_PLACEMENT_3D ( 'NONE', #74143, #61638, #80380 ) ; +#47728 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507587200, 28.07379779496243400, -28.70555803802994200 ) ) ; +#47729 = AXIS2_PLACEMENT_3D ( 'NONE', #2606, #46121, #8853 ) ; +#47730 = ADVANCED_FACE ( 'NONE', ( #5863 ), #80787, .T. ) ; +#47731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47732 = VERTEX_POINT ( 'NONE', #13140 ) ; +#47733 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#47734 = CIRCLE ( 'NONE', #26560, 9.500000000000097700 ) ; +#47735 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#47736 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ; +#47737 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 61.66666666666668600, 1.294441961969997200 ) ) ; +#47738 = EDGE_LOOP ( 'NONE', ( #40906, #35744, #24407 ) ) ; +#47739 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182600, 39.13131911501876200, -28.51286550264509500 ) ) ; +#47740 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484572600, 61.01872124563919200, -28.53757464917570300 ) ) ; +#47741 = ORIENTED_EDGE ( 'NONE', *, *, #71572, .T. ) ; +#47742 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ; +#47743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47744 = ORIENTED_EDGE ( 'NONE', *, *, #12220, .T. ) ; +#47745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47746 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47747 = CONICAL_SURFACE ( 'NONE', #50847, 10.50000000000009600, 0.7853981633974500600 ) ; +#47748 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489670800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#47749 = CARTESIAN_POINT ( 'NONE', ( -3.935444260775056600, 60.09037803491490600, -28.29483400905883500 ) ) ; +#47750 = AXIS2_PLACEMENT_3D ( 'NONE', #742, #75661, #12308 ) ; +#47751 = ORIENTED_EDGE ( 'NONE', *, *, #41632, .F. ) ; +#47752 = EDGE_CURVE ( 'NONE', #67291, #49697, #26299, .T. ) ; +#47753 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47755 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45851, #70634, #33373, #8597 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726977425200, 0.0008135742306951464300 ), + .UNSPECIFIED. ) ; +#47756 = CARTESIAN_POINT ( 'NONE', ( 10.77884208558771700, 20.43523632220587800, -28.30315276798564700 ) ) ; +#47757 = ORIENTED_EDGE ( 'NONE', *, *, #68259, .T. ) ; +#47758 = CARTESIAN_POINT ( 'NONE', ( -17.32922790642991400, 81.13127791441745300, -28.43092544535692000 ) ) ; +#47759 = CARTESIAN_POINT ( 'NONE', ( -4.722391605213471300, 50.54999999999999700, -28.70555803802997400 ) ) ; +#47760 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187000, 69.60439022488336000, -28.70555803802997700 ) ) ; +#47761 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 75.79999999999999700, -28.20555803802997700 ) ) ; +#47762 = CYLINDRICAL_SURFACE ( 'NONE', #39938, 10.00000000000000000 ) ; +#47763 = ORIENTED_EDGE ( 'NONE', *, *, #54390, .F. ) ; +#47764 = EDGE_CURVE ( 'NONE', #60477, #42834, #11825, .T. ) ; +#47765 = CARTESIAN_POINT ( 'NONE', ( 8.851846210996310300, 85.79999999999998300, -28.37148172714571000 ) ) ; +#47766 = STYLED_ITEM ( 'NONE', ( #2184 ), #54491 ) ; +#47767 = AXIS2_PLACEMENT_3D ( 'NONE', #49726, #12524, #56010 ) ; +#47768 = CARTESIAN_POINT ( 'NONE', ( -16.66296614144847900, 8.407630689877859000, -28.56619134221094200 ) ) ; +#47769 = CARTESIAN_POINT ( 'NONE', ( 17.24297557446551800, 60.16517473503392200, -28.29551658696704300 ) ) ; +#47770 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 35.05000000000000400, -28.20555803802995200 ) ) ; +#47771 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47772 = AXIS2_PLACEMENT_3D ( 'NONE', #37379, #62171, #6401 ) ; +#47773 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47774 = PLANE ( 'NONE', #6861 ) ; +#47775 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#47776 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 68.00000000000000000, -1.205558038030002800 ) ) ; +#47777 = EDGE_LOOP ( 'NONE', ( #68532, #21475, #1760 ) ) ; +#47778 = ORIENTED_EDGE ( 'NONE', *, *, #64458, .F. ) ; +#47779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47780 = ORIENTED_EDGE ( 'NONE', *, *, #49033, .T. ) ; +#47781 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 33.16666666666668600, -2.545304000185620600 ) ) ; +#47782 = AXIS2_PLACEMENT_3D ( 'NONE', #69466, #25987, #32216 ) ; +#47783 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47784 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819196400, 79.94924284854674600, -28.20555803802997700 ) ) ; +#47785 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -1.833333333333314600, -3.349151577478988200 ) ) ; +#47786 = FACE_OUTER_BOUND ( 'NONE', #75302, .T. ) ; +#47787 = ORIENTED_EDGE ( 'NONE', *, *, #38930, .T. ) ; +#47788 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#47789 = ORIENTED_EDGE ( 'NONE', *, *, #56053, .F. ) ; +#47790 = CARTESIAN_POINT ( 'NONE', ( -3.709868259763024600, 44.44999999999999600, -9.966404335981710700 ) ) ; +#47791 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#47792 = FACE_OUTER_BOUND ( 'NONE', #1655, .T. ) ; +#47793 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 35.50000000000000700, 6.847000845227646500 ) ) ; +#47794 = ORIENTED_EDGE ( 'NONE', *, *, #25465, .T. ) ; +#47795 = ORIENTED_EDGE ( 'NONE', *, *, #15101, .F. ) ; +#47796 = ORIENTED_EDGE ( 'NONE', *, *, #29771, .F. ) ; +#47797 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555567000, 71.87833896172684000, -28.53892303408239100 ) ) ; +#47798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47799 = ORIENTED_EDGE ( 'NONE', *, *, #17944, .T. ) ; +#47800 = ORIENTED_EDGE ( 'NONE', *, *, #41992, .F. ) ; +#47801 = EDGE_LOOP ( 'NONE', ( #15885, #76619, #39212, #71331 ) ) ; +#47802 = FACE_OUTER_BOUND ( 'NONE', #9680, .T. ) ; +#47803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47804 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47806 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285572300, 73.67681279774481600, -28.70555803803030800 ) ) ; +#47807 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10686, #47908, #35703, #79230 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989886705500E-007, 0.0002930330874877061500 ), + .UNSPECIFIED. ) ; +#47808 = CARTESIAN_POINT ( 'NONE', ( 24.76935079906265000, 5.115450126082080800, -20.85832528517298800 ) ) ; +#47809 = EDGE_CURVE ( 'NONE', #31444, #23878, #78124, .T. ) ; +#47810 = CONICAL_SURFACE ( 'NONE', #14496, 10.00000000000009200, 0.7853981633974447300 ) ; +#47811 = ORIENTED_EDGE ( 'NONE', *, *, #60012, .T. ) ; +#47812 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000044100, 78.62623792124928500, -28.70555803803047500 ) ) ; +#47813 = ORIENTED_EDGE ( 'NONE', *, *, #53456, .F. ) ; +#47814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#47815 = EDGE_CURVE ( 'NONE', #35143, #2750, #63684, .T. ) ; +#47816 = ORIENTED_EDGE ( 'NONE', *, *, #50306, .F. ) ; +#47817 = ORIENTED_EDGE ( 'NONE', *, *, #15786, .T. ) ; +#47818 = CARTESIAN_POINT ( 'NONE', ( 17.36049707220281500, 41.43250300240230600, -28.25438406275899800 ) ) ; +#47819 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344343800, 41.67701665379242100, -28.20555803802997400 ) ) ; +#47820 = ORIENTED_EDGE ( 'NONE', *, *, #59781, .T. ) ; +#47821 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47822 = ADVANCED_FACE ( 'NONE', ( #1934 ), #47659, .F. ) ; +#47823 = FACE_OUTER_BOUND ( 'NONE', #69241, .T. ) ; +#47824 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 12.17681279774499700, -28.70555803802994200 ) ) ; +#47825 = EDGE_CURVE ( 'NONE', #33691, #26321, #64272, .T. ) ; +#47826 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47827 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23879, #12743, #31499, #75005 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001871986839425554400 ), + .UNSPECIFIED. ) ; +#47828 = ADVANCED_FACE ( 'NONE', ( #20462 ), #78864, .T. ) ; +#47829 = ORIENTED_EDGE ( 'NONE', *, *, #64002, .F. ) ; +#47830 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47831 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47832 = EDGE_CURVE ( 'NONE', #80788, #4437, #49171, .T. ) ; +#47833 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.86203212531317800, -28.38801640354855800 ) ) ; +#47834 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#47835 = AXIS2_PLACEMENT_3D ( 'NONE', #838, #7089, #56883 ) ; +#47836 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 39.00000000000000700, -9.205558038030005700 ) ) ; +#47837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47838 = CONICAL_SURFACE ( 'NONE', #41959, 10.50000000000009900, 0.7853981633974518300 ) ; +#47839 = ORIENTED_EDGE ( 'NONE', *, *, #27280, .T. ) ; +#47840 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428553400, 60.07141756547892400, -28.70555803802997700 ) ) ; +#47841 = VERTEX_POINT ( 'NONE', #77222 ) ; +#47842 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47843 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#47844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47845 = AXIS2_PLACEMENT_3D ( 'NONE', #76527, #39258, #2001 ) ; +#47846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47847 = CARTESIAN_POINT ( 'NONE', ( -7.935386411363192700, 57.15000000000011900, 3.714294703973786600 ) ) ; +#47848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42915, #55159, #67695, #5663 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736096602200E-007, 0.0009376786059871937500 ), + .UNSPECIFIED. ) ; +#47849 = EDGE_CURVE ( 'NONE', #40983, #69853, #34763, .T. ) ; +#47850 = ADVANCED_FACE ( 'NONE', ( #14595 ), #45697, .F. ) ; +#47851 = EDGE_CURVE ( 'NONE', #44247, #62602, #55485, .T. ) ; +#47852 = AXIS2_PLACEMENT_3D ( 'NONE', #6284, #68575, #12553 ) ; +#47853 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#47854 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820120300, 80.08258585630864000, -28.27509349209150400 ) ) ; +#47855 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 65.79999999999999700, -28.70525300642875200 ) ) ; +#47856 = ORIENTED_EDGE ( 'NONE', *, *, #24855, .F. ) ; +#47857 = CARTESIAN_POINT ( 'NONE', ( -21.24918694036212600, 6.875798074848379600, -26.53370947232377800 ) ) ; +#47858 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47859 = EDGE_LOOP ( 'NONE', ( #35310, #46612, #2199, #47553, #57026 ) ) ; +#47860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47861 = EDGE_CURVE ( 'NONE', #42850, #27378, #20284, .T. ) ; +#47862 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280407300, 12.15857157145700800, -28.37229765499279200 ) ) ; +#47863 = AXIS2_PLACEMENT_3D ( 'NONE', #35886, #79412, #42116 ) ; +#47864 = AXIS2_PLACEMENT_3D ( 'NONE', #2236, #64309, #45734 ) ; +#47865 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#47866 = CARTESIAN_POINT ( 'NONE', ( 17.24584322970066800, 70.70681957915861900, -28.45010557050480000 ) ) ; +#47867 = CONICAL_SURFACE ( 'NONE', #68944, 10.00000000000009400, 0.7853981633974447300 ) ; +#47868 = EDGE_LOOP ( 'NONE', ( #74520, #3185, #55570, #75837, #45641 ) ) ; +#47869 = CIRCLE ( 'NONE', #39418, 10.50000000000009600 ) ; +#47870 = ORIENTED_EDGE ( 'NONE', *, *, #5237, .T. ) ; +#47871 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#47872 = ORIENTED_EDGE ( 'NONE', *, *, #52015, .T. ) ; +#47873 = FACE_OUTER_BOUND ( 'NONE', #10619, .T. ) ; +#47874 = ORIENTED_EDGE ( 'NONE', *, *, #75955, .T. ) ; +#47875 = AXIS2_PLACEMENT_3D ( 'NONE', #36556, #5565, #23811 ) ; +#47876 = ORIENTED_EDGE ( 'NONE', *, *, #38811, .F. ) ; +#47877 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 75.79999999999998300, -28.20555803802997700 ) ) ; +#47878 = ORIENTED_EDGE ( 'NONE', *, *, #30486, .F. ) ; +#47880 = ORIENTED_EDGE ( 'NONE', *, *, #22248, .T. ) ; +#47879 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 7.500000000000000900, -4.865812075874393000 ) ) ; +#47881 = ORIENTED_EDGE ( 'NONE', *, *, #17718, .F. ) ; +#47882 = CIRCLE ( 'NONE', #35862, 10.50000000000009600 ) ; +#47883 = CARTESIAN_POINT ( 'NONE', ( 11.50207502155157800, 50.60145251508568300, -28.70555803803030800 ) ) ; +#47884 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76241, #51450, #70248, #32997 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704003979100 ), + .UNSPECIFIED. ) ; +#47885 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 47.66666666666667900, -5.205558038030003100 ) ) ; +#47886 = ORIENTED_EDGE ( 'NONE', *, *, #48479, .F. ) ; +#47887 = AXIS2_PLACEMENT_3D ( 'NONE', #58734, #21509, #65021 ) ; +#47888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47889 = CONICAL_SURFACE ( 'NONE', #23321, 10.50000000000009200, 0.7853981633974482800 ) ; +#47890 = ORIENTED_EDGE ( 'NONE', *, *, #20459, .F. ) ; +#47891 = ORIENTED_EDGE ( 'NONE', *, *, #22587, .F. ) ; +#47892 = ORIENTED_EDGE ( 'NONE', *, *, #57370, .T. ) ; +#47893 = EDGE_LOOP ( 'NONE', ( #65053, #28657, #41650, #44894 ) ) ; +#47894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47895 = CONICAL_SURFACE ( 'NONE', #36148, 10.50000000000009600, 0.7853981633974518300 ) ; +#47896 = VERTEX_POINT ( 'NONE', #58989 ) ; +#47897 = CARTESIAN_POINT ( 'NONE', ( 11.95723973586456000, 65.79999999999951400, -28.53819074160733700 ) ) ; +#47898 = CIRCLE ( 'NONE', #43480, 10.50000000000009900 ) ; +#47899 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#47900 = AXIS2_PLACEMENT_3D ( 'NONE', #48182, #10977, #54473 ) ; +#47901 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#47902 = ADVANCED_FACE ( 'NONE', ( #49592 ), #60363, .T. ) ; +#47903 = EDGE_CURVE ( 'NONE', #17320, #76297, #76870, .T. ) ; +#47904 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274700100, 45.23212903577619000, -28.37244029424746500 ) ) ; +#47905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47906 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#47907 = AXIS2_PLACEMENT_3D ( 'NONE', #28628, #59601, #65857 ) ; +#47908 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686917700, 81.58005252438317700, -28.24986299608908900 ) ) ; +#47909 = FACE_OUTER_BOUND ( 'NONE', #40800, .T. ) ; +#47910 = EDGE_LOOP ( 'NONE', ( #63327, #74876, #7502 ) ) ; +#47911 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 55.92347538297996600, -28.70555803802997700 ) ) ; +#47912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47914 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#47915 = ADVANCED_FACE ( 'NONE', ( #31161 ), #10713, .F. ) ; +#47916 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#47917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47918 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 81.08083798124329200, -28.45106778992437700 ) ) ; +#47919 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41850, #35625, #54354, #17119 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401229600, 0.004682530427071051100 ), + .UNSPECIFIED. ) ; +#47920 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099026900, 49.56267502090536000, -28.41043597897461800 ) ) ; +#47921 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47922 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#47924 = EDGE_CURVE ( 'NONE', #36098, #7608, #5823, .T. ) ; +#47925 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999899600, 80.79999999999991200, -28.70555803802997700 ) ) ; +#47927 = EDGE_CURVE ( 'NONE', #19093, #33069, #12662, .T. ) ; +#47926 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56904, #19642, #75651, #38370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362990900, 0.0007987676590766491900 ), + .UNSPECIFIED. ) ; +#47928 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#47929 = EDGE_LOOP ( 'NONE', ( #18032, #50003, #32072 ) ) ; +#47930 = CARTESIAN_POINT ( 'NONE', ( -8.851846210996301400, 65.79999999999998300, -28.37148172714571000 ) ) ; +#47931 = ORIENTED_EDGE ( 'NONE', *, *, #62015, .T. ) ; +#47932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47933 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609139900, 70.13716795162604000, -28.48697406221692700 ) ) ; +#47934 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#47935 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807170800, 64.79999999999999700, -28.70555803802997700 ) ) ; +#47936 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.523234146875355000E-016 ) ) ; +#47937 = EDGE_CURVE ( 'NONE', #79130, #55373, #29254, .T. ) ; +#47938 = ADVANCED_FACE ( 'NONE', ( #27267 ), #8717, .T. ) ; +#47939 = EDGE_CURVE ( 'NONE', #63313, #8615, #72167, .T. ) ; +#47940 = CIRCLE ( 'NONE', #31905, 10.00000000000009200 ) ; +#47941 = VERTEX_POINT ( 'NONE', #10031 ) ; +#47942 = AXIS2_PLACEMENT_3D ( 'NONE', #59990, #22716, #66247 ) ; +#47943 = FACE_OUTER_BOUND ( 'NONE', #55307, .T. ) ; +#47944 = ORIENTED_EDGE ( 'NONE', *, *, #15485, .T. ) ; +#47945 = CIRCLE ( 'NONE', #10039, 10.00000000000009200 ) ; +#47946 = ORIENTED_EDGE ( 'NONE', *, *, #51611, .F. ) ; +#47947 = ORIENTED_EDGE ( 'NONE', *, *, #35688, .T. ) ; +#47948 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 53.66666666666667900, -8.133761268305512700 ) ) ; +#47949 = ORIENTED_EDGE ( 'NONE', *, *, #59908, .F. ) ; +#47950 = AXIS2_PLACEMENT_3D ( 'NONE', #43368, #6124, #49602 ) ; +#47951 = CIRCLE ( 'NONE', #19670, 10.00000000000009600 ) ; +#47952 = EDGE_CURVE ( 'NONE', #55233, #16467, #53546, .T. ) ; +#47953 = EDGE_CURVE ( 'NONE', #50435, #58204, #25308, .T. ) ; +#47954 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47955 = EDGE_CURVE ( 'NONE', #9420, #9705, #74934, .T. ) ; +#47956 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919700, 14.05000000000000400, -28.65220501466659200 ) ) ; +#47957 = ORIENTED_EDGE ( 'NONE', *, *, #60993, .F. ) ; +#47958 = FACE_OUTER_BOUND ( 'NONE', #30146, .T. ) ; +#47959 = AXIS2_PLACEMENT_3D ( 'NONE', #63529, #26277, #69749 ) ; +#47960 = VERTEX_POINT ( 'NONE', #35085 ) ; +#47961 = EDGE_LOOP ( 'NONE', ( #28777, #76335, #26544 ) ) ; +#47962 = EDGE_LOOP ( 'NONE', ( #15113, #36448, #69836, #63171, #41433 ) ) ; +#47963 = ORIENTED_EDGE ( 'NONE', *, *, #31655, .F. ) ; +#47964 = EDGE_CURVE ( 'NONE', #68974, #49715, #57665, .T. ) ; +#47965 = CONICAL_SURFACE ( 'NONE', #31494, 10.00000000000009600, 0.7853981633974447300 ) ; +#47966 = AXIS2_PLACEMENT_3D ( 'NONE', #40482, #15740, #59256 ) ; +#47967 = AXIS2_PLACEMENT_3D ( 'NONE', #17912, #61461, #24181 ) ; +#47968 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 70.34510448120778400, -28.37193179497729600 ) ) ; +#47969 = CARTESIAN_POINT ( 'NONE', ( 16.58259000732404700, 91.84185412319187900, -28.58001364135636300 ) ) ; +#47970 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24471, #12230, #18476, #62011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589649801606369800E-007, 0.0003301105057474666300 ), + .UNSPECIFIED. ) ; +#47971 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630000, 38.92298334620783600, -28.20555803802995200 ) ) ; +#47972 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47973 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47974 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 25.00000000000002100, 9.794441961969996100 ) ) ; +#47975 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541800, 51.01872124563919900, -28.53757464917570300 ) ) ; +#47976 = ORIENTED_EDGE ( 'NONE', *, *, #9099, .T. ) ; +#47977 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510344300, 18.15930907398619700, -28.35186440610855400 ) ) ; +#47978 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999932500, 20.96823913367206400, -28.70555803802995200 ) ) ; +#47979 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .T. ) ; +#47980 = LINE ( 'NONE', #41382, #64592 ) ; +#47981 = CARTESIAN_POINT ( 'NONE', ( 16.65164147752711400, 59.51229806853776700, -28.47147304844861500 ) ) ; +#47982 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47984 = AXIS2_PLACEMENT_3D ( 'NONE', #20355, #63888, #26632 ) ; +#47985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47986 = ADVANCED_FACE ( 'NONE', ( #58385 ), #6789, .T. ) ; +#47987 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630700, 28.42298334620784000, -28.20555803802994200 ) ) ; +#47988 = CARTESIAN_POINT ( 'NONE', ( -23.01334653323161900, 100.6039383362271500, -23.08084971458210800 ) ) ; +#47989 = AXIS2_PLACEMENT_3D ( 'NONE', #19913, #19357, #13667 ) ; +#47990 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#47991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#47992 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 59.50000000000002100, -4.865812075874393000 ) ) ; +#47993 = CIRCLE ( 'NONE', #43499, 10.50000000000009600 ) ; +#47994 = CARTESIAN_POINT ( 'NONE', ( 24.15704467281153000, 0.8429553271888991000, -23.01012232363650200 ) ) ; +#47995 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53022, #46755, #22050, #65584 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852029400, 0.0009376791149930240700 ), + .UNSPECIFIED. ) ; +#47996 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825387800, 71.43945992495515900, -28.34042301926901400 ) ) ; +#47997 = ORIENTED_EDGE ( 'NONE', *, *, #25117, .T. ) ; +#47998 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#47999 = ADVANCED_FACE ( 'NONE', ( #72995 ), #54478, .T. ) ; +#48000 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#48002 = AXIS2_PLACEMENT_3D ( 'NONE', #42294, #73601, #36322 ) ; +#48001 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70681, #51884, #52159, #14934 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716388000, 0.004080294652941977300 ), + .UNSPECIFIED. ) ; +#48003 = CARTESIAN_POINT ( 'NONE', ( 7.643150262926105200, 9.797591630864088700, -28.70350937758197000 ) ) ; +#48004 = ORIENTED_EDGE ( 'NONE', *, *, #35487, .T. ) ; +#48005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48006 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#48007 = EDGE_LOOP ( 'NONE', ( #13602, #39125, #12078, #37856, #57051 ) ) ; +#48008 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#48009 = FACE_OUTER_BOUND ( 'NONE', #75353, .T. ) ; +#48010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48011 = ORIENTED_EDGE ( 'NONE', *, *, #55526, .T. ) ; +#48012 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187800, 30.96868088498122200, -28.51286550264512300 ) ) ; +#48013 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 68.39962244433174000, -28.53664883431610000 ) ) ; +#48014 = FACE_OUTER_BOUND ( 'NONE', #47438, .T. ) ; +#48015 = AXIS2_PLACEMENT_3D ( 'NONE', #48189, #10982, #54477 ) ; +#48016 = ORIENTED_EDGE ( 'NONE', *, *, #27473, .F. ) ; +#48017 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385288600, 28.49322649091135400, -28.30799595738870500 ) ) ; +#48018 = ADVANCED_FACE ( 'NONE', ( #41824 ), #21402, .F. ) ; +#48019 = EDGE_LOOP ( 'NONE', ( #601, #36438, #3273, #47715 ) ) ; +#48020 = CIRCLE ( 'NONE', #14688, 10.50000000000009600 ) ; +#48021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73166, #10875, #60923, #23654 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674238356731000E-007, 0.0007606607323829817600 ), + .UNSPECIFIED. ) ; +#48022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48024 = ORIENTED_EDGE ( 'NONE', *, *, #26372, .T. ) ; +#48023 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48025 = ORIENTED_EDGE ( 'NONE', *, *, #69415, .T. ) ; +#48026 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48027 = ORIENTED_EDGE ( 'NONE', *, *, #78592, .F. ) ; +#48028 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484958100, 89.28967419478928500, -28.59353418718927700 ) ) ; +#48029 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999706900, 83.65857157145697400, -28.20555803803030800 ) ) ; +#48030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48033 = ADVANCED_FACE ( 'NONE', ( #71021 ), #69077, .F. ) ; +#48034 = CYLINDRICAL_SURFACE ( 'NONE', #790, 10.00000000000000200 ) ; +#48035 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .F. ) ; +#48036 = FACE_OUTER_BOUND ( 'NONE', #55201, .T. ) ; +#48037 = EDGE_CURVE ( 'NONE', #50545, #73075, #4829, .T. ) ; +#48038 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48039 = EDGE_LOOP ( 'NONE', ( #61566, #41817, #35576, #54551 ) ) ; +#48040 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#48041 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 60.07141756547892400, -28.70555803802997700 ) ) ; +#48042 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 65.83333333333332900, 1.741883078712340300 ) ) ; +#48044 = EDGE_CURVE ( 'NONE', #20135, #11286, #43195, .T. ) ; +#48043 = EDGE_LOOP ( 'NONE', ( #76214, #4702, #40409, #45154 ) ) ; +#48045 = ORIENTED_EDGE ( 'NONE', *, *, #65527, .F. ) ; +#48046 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#48047 = ORIENTED_EDGE ( 'NONE', *, *, #22361, .F. ) ; +#48048 = CONICAL_SURFACE ( 'NONE', #44404, 10.00000000000009400, 0.7853981633974447300 ) ; +#48049 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 31.00000000000001400, -1.205558038030002800 ) ) ; +#48050 = ORIENTED_EDGE ( 'NONE', *, *, #51748, .F. ) ; +#48051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48052 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 90.16749699759755300, -28.20555803803030800 ) ) ; +#48053 = EDGE_CURVE ( 'NONE', #65515, #62074, #62297, .T. ) ; +#48054 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1620, #69888, #7872, #51353 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438981465200E-007, 0.0007763347809200132800 ), + .UNSPECIFIED. ) ; +#48055 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, -3.999999999999989800, -1.205558038030005300 ) ) ; +#48056 = EDGE_CURVE ( 'NONE', #56903, #22718, #37908, .T. ) ; +#48057 = VERTEX_POINT ( 'NONE', #79382 ) ; +#48058 = VERTEX_POINT ( 'NONE', #36126 ) ; +#48059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48060 = EDGE_CURVE ( 'NONE', #42914, #44409, #28809, .T. ) ; +#48061 = ORIENTED_EDGE ( 'NONE', *, *, #15652, .T. ) ; +#48062 = CARTESIAN_POINT ( 'NONE', ( -9.031708188267073100, 44.45000000000001700, -2.808896117716659400 ) ) ; +#48063 = CONICAL_SURFACE ( 'NONE', #72681, 10.50000000000009600, 0.7853981633974482800 ) ; +#48064 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 33.33333333333332100, -6.705558038030005700 ) ) ; +#48065 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#48066 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499869700, 89.83662311806176600, -28.37223523914899900 ) ) ; +#48067 = AXIS2_PLACEMENT_3D ( 'NONE', #23293, #29866, #73341 ) ; +#48068 = EDGE_CURVE ( 'NONE', #80648, #26866, #39880, .T. ) ; +#48069 = EDGE_CURVE ( 'NONE', #25568, #80062, #52500, .T. ) ; +#48070 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48071 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 20.43250300240229200, -28.20555803802995200 ) ) ; +#48072 = EDGE_CURVE ( 'NONE', #18005, #26388, #14300, .T. ) ; +#48073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48074 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#48075 = CARTESIAN_POINT ( 'NONE', ( 22.90485055417043400, 6.047579358419876700, -24.83056793396285000 ) ) ; +#48076 = AXIS2_PLACEMENT_3D ( 'NONE', #63590, #13817, #20070 ) ; +#48077 = CIRCLE ( 'NONE', #43967, 9.500000000000099500 ) ; +#48078 = CARTESIAN_POINT ( 'NONE', ( -10.17141482565947700, 93.00673221364461100, -28.60974763495490000 ) ) ; +#48079 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 43.65857157145701700, -28.20555803802997700 ) ) ; +#48080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48081 = CARTESIAN_POINT ( 'NONE', ( 19.84867730405030900, 101.2974686327870300, -21.15018337238044300 ) ) ; +#48082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48083 = VERTEX_POINT ( 'NONE', #5383 ) ; +#48084 = AXIS2_PLACEMENT_3D ( 'NONE', #73845, #80087, #30346 ) ; +#48085 = PLANE ( 'NONE', #54408 ) ; +#48086 = AXIS2_PLACEMENT_3D ( 'NONE', #20101, #51051, #13851 ) ; +#48087 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48088 = ORIENTED_EDGE ( 'NONE', *, *, #3549, .T. ) ; +#48089 = ADVANCED_FACE ( 'NONE', ( #2870 ), #918, .F. ) ; +#48090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48091 = PLANE ( 'NONE', #70160 ) ; +#48092 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 49.73237991241949600, -28.26633708900883600 ) ) ; +#48093 = FACE_OUTER_BOUND ( 'NONE', #22434, .T. ) ; +#48094 = ORIENTED_EDGE ( 'NONE', *, *, #5425, .F. ) ; +#48095 = CIRCLE ( 'NONE', #36693, 9.500000000000095900 ) ; +#48096 = VERTEX_POINT ( 'NONE', #36640 ) ; +#48097 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 36.83333333333335000, 6.794441961969992500 ) ) ; +#48098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48099 = CONICAL_SURFACE ( 'NONE', #12548, 10.50000000000009600, 0.7853981633974518300 ) ; +#48100 = FACE_OUTER_BOUND ( 'NONE', #75798, .T. ) ; +#48101 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543121600, 28.73522516708109400, -28.27573853395003300 ) ) ; +#48102 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19674, #5790, #25939, #69419 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0007606633682806791400 ), + .UNSPECIFIED. ) ; +#48103 = VERTEX_POINT ( 'NONE', #80177 ) ; +#48104 = ORIENTED_EDGE ( 'NONE', *, *, #22976, .T. ) ; +#48105 = ORIENTED_EDGE ( 'NONE', *, *, #21905, .F. ) ; +#48106 = ADVANCED_FACE ( 'NONE', ( #35997 ), #48591, .F. ) ; +#48107 = CARTESIAN_POINT ( 'NONE', ( 17.22127746187991800, 9.569148358746559800, -28.45573375118228300 ) ) ; +#48108 = AXIS2_PLACEMENT_3D ( 'NONE', #74700, #62185, #43642 ) ; +#48109 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305507000, 61.89604671418344900, -28.70555803803002000 ) ) ; +#48110 = CARTESIAN_POINT ( 'NONE', ( -9.274435985812422300, 57.15000000000004100, -3.244601296459952000 ) ) ; +#48111 = CARTESIAN_POINT ( 'NONE', ( 9.769169305343032400, 60.65007990305427700, -28.43638873268705700 ) ) ; +#48112 = CIRCLE ( 'NONE', #30509, 10.00000000000009400 ) ; +#48113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48114 = ORIENTED_EDGE ( 'NONE', *, *, #61270, .F. ) ; +#48115 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 69.28967419478898600, -28.59353418718932400 ) ) ; +#48116 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948476500, 70.58127875436049700, -28.53757464917601500 ) ) ; +#48117 = CONICAL_SURFACE ( 'NONE', #3898, 10.00000000000009400, 0.7853981633974447300 ) ; +#48118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48119 = EDGE_LOOP ( 'NONE', ( #11643, #69571, #40903, #41510 ) ) ; +#48120 = ADVANCED_FACE ( 'NONE', ( #50534 ), #15544, .T. ) ; +#48121 = EDGE_CURVE ( 'NONE', #19993, #56225, #32084, .T. ) ; +#48122 = ORIENTED_EDGE ( 'NONE', *, *, #32354, .T. ) ; +#48123 = ORIENTED_EDGE ( 'NONE', *, *, #62751, .T. ) ; +#48124 = CARTESIAN_POINT ( 'NONE', ( -24.05487961159183600, 5.472756667898119400, -22.95874917990453000 ) ) ; +#48125 = ORIENTED_EDGE ( 'NONE', *, *, #75728, .F. ) ; +#48126 = AXIS2_PLACEMENT_3D ( 'NONE', #79006, #41693, #4448 ) ; +#48127 = ORIENTED_EDGE ( 'NONE', *, *, #52587, .F. ) ; +#48128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48129 = ORIENTED_EDGE ( 'NONE', *, *, #22503, .T. ) ; +#48130 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#48131 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48132 = CIRCLE ( 'NONE', #10036, 10.00000000000009400 ) ; +#48133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48134 = CARTESIAN_POINT ( 'NONE', ( -10.75702442553440900, 90.16517473503392900, -28.29551658696701800 ) ) ; +#48135 = ADVANCED_FACE ( 'NONE', ( #34032 ), #74208, .T. ) ; +#48136 = ORIENTED_EDGE ( 'NONE', *, *, #26821, .F. ) ; +#48137 = ORIENTED_EDGE ( 'NONE', *, *, #48649, .F. ) ; +#48138 = AXIS2_PLACEMENT_3D ( 'NONE', #67698, #30454, #73959 ) ; +#48139 = ORIENTED_EDGE ( 'NONE', *, *, #49836, .F. ) ; +#48140 = FACE_OUTER_BOUND ( 'NONE', #59109, .T. ) ; +#48141 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#48142 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 5.333333333333341900, 3.124568980892187500 ) ) ; +#48143 = AXIS2_PLACEMENT_3D ( 'NONE', #30613, #74125, #36825 ) ; +#48144 = CARTESIAN_POINT ( 'NONE', ( -2.279102202939514900, 51.50050326225951400, -28.63287226700114400 ) ) ; +#48145 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68081, #74355, #68335, #31105 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524562735000E-007, 0.0007303749718166469000 ), + .UNSPECIFIED. ) ; +#48146 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432849900, 28.85339758437810100, -28.20555803802994200 ) ) ; +#48147 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 45.49999999999998600, 4.650848422521012700 ) ) ; +#48148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48149 = EDGE_CURVE ( 'NONE', #23991, #60743, #80607, .T. ) ; +#48150 = CONICAL_SURFACE ( 'NONE', #14201, 10.00000000000009400, 0.7853981633974447300 ) ; +#48151 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72242, #28747, #41202, #3932 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527016346500E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#48152 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48154 = ORIENTED_EDGE ( 'NONE', *, *, #21655, .F. ) ; +#48155 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34015, #40529, #59305, #22056 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192577276900 ), + .UNSPECIFIED. ) ; +#48156 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48157 = ORIENTED_EDGE ( 'NONE', *, *, #33784, .T. ) ; +#48158 = FACE_OUTER_BOUND ( 'NONE', #78927, .T. ) ; +#48159 = ORIENTED_EDGE ( 'NONE', *, *, #66655, .F. ) ; +#48160 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#48161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74689, #31180, #6406, #49882 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572505078300E-007, 0.0004669842289003688100 ), + .UNSPECIFIED. ) ; +#48162 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#48163 = CONICAL_SURFACE ( 'NONE', #37468, 10.00000000000009200, 0.7853981633974447300 ) ; +#48164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48165 = CIRCLE ( 'NONE', #62212, 10.00000000000009200 ) ; +#48166 = EDGE_CURVE ( 'NONE', #53552, #35143, #66167, .T. ) ; +#48167 = ORIENTED_EDGE ( 'NONE', *, *, #28956, .F. ) ; +#48168 = EDGE_CURVE ( 'NONE', #22539, #42850, #51646, .T. ) ; +#48169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48170 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#48171 = CONICAL_SURFACE ( 'NONE', #29735, 10.50000000000009200, 0.7853981633974482800 ) ; +#48172 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#48173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48174 = ORIENTED_EDGE ( 'NONE', *, *, #10468, .T. ) ; +#48175 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#48177 = ORIENTED_EDGE ( 'NONE', *, *, #42292, .T. ) ; +#48176 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48178 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#48179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48180 = AXIS2_PLACEMENT_3D ( 'NONE', #2586, #64655, #39873 ) ; +#48181 = EDGE_CURVE ( 'NONE', #46838, #52911, #37206, .T. ) ; +#48182 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#48183 = EDGE_CURVE ( 'NONE', #29460, #52871, #22776, .T. ) ; +#48184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48185 = EDGE_CURVE ( 'NONE', #46133, #55143, #67132, .T. ) ; +#48186 = FACE_OUTER_BOUND ( 'NONE', #24219, .T. ) ; +#48187 = FACE_OUTER_BOUND ( 'NONE', #25775, .T. ) ; +#48188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48189 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#48190 = VERTEX_POINT ( 'NONE', #62478 ) ; +#48191 = AXIS2_PLACEMENT_3D ( 'NONE', #13668, #13404, #63438 ) ; +#48192 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819428200, 61.65075715145307100, -28.20555803803005900 ) ) ; +#48193 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48194 = ORIENTED_EDGE ( 'NONE', *, *, #28645, .F. ) ; +#48195 = VERTEX_POINT ( 'NONE', #56208 ) ; +#48196 = ORIENTED_EDGE ( 'NONE', *, *, #35004, .T. ) ; +#48197 = ORIENTED_EDGE ( 'NONE', *, *, #31921, .F. ) ; +#48198 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48199 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78496, #9939, #22449, #41206 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001008322012793431300, 0.0003934298461347595200 ), + .UNSPECIFIED. ) ; +#48200 = ORIENTED_EDGE ( 'NONE', *, *, #27493, .T. ) ; +#48201 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 51.43250300240195800, -28.20555803803030800 ) ) ; +#48202 = CONICAL_SURFACE ( 'NONE', #19790, 10.00000000000009200, 0.7853981633974447300 ) ; +#48203 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180760100, 81.65075715145273700, -28.20555803802997700 ) ) ; +#48204 = AXIS2_PLACEMENT_3D ( 'NONE', #32891, #39130, #14410 ) ; +#48205 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#48206 = CARTESIAN_POINT ( 'NONE', ( -10.51172359417775200, 9.414546627889175000, -28.68840631370114000 ) ) ; +#48207 = ORIENTED_EDGE ( 'NONE', *, *, #72762, .F. ) ; +#48208 = AXIS2_PLACEMENT_3D ( 'NONE', #62813, #25559, #69042 ) ; +#48209 = ORIENTED_EDGE ( 'NONE', *, *, #49974, .T. ) ; +#48210 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5546, #30335, #49014, #11818 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921885527100E-007, 0.0004084731003434967700 ), + .UNSPECIFIED. ) ; +#48211 = ORIENTED_EDGE ( 'NONE', *, *, #79333, .T. ) ; +#48212 = CONICAL_SURFACE ( 'NONE', #791, 10.50000000000009600, 0.7853981633974500600 ) ; +#48213 = ORIENTED_EDGE ( 'NONE', *, *, #525, .F. ) ; +#48214 = VECTOR ( 'NONE', #73671, 1000.000000000000000 ) ; +#48215 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48216 = ADVANCED_FACE ( 'NONE', ( #65207 ), #13612, .T. ) ; +#48217 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 51.49999999999998600, 4.650848422521016300 ) ) ; +#48218 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48219 = AXIS2_PLACEMENT_3D ( 'NONE', #60487, #72992, #35723 ) ; +#48220 = EDGE_CURVE ( 'NONE', #19525, #35501, #8270, .T. ) ; +#48221 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48222 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 41.43650294695131500, -28.30782889147482400 ) ) ; +#48223 = ADVANCED_FACE ( 'NONE', ( #79781 ), #61307, .T. ) ; +#48224 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48225 = CONICAL_SURFACE ( 'NONE', #18840, 10.50000000000009600, 0.7853981633974482800 ) ; +#48226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48227 = EDGE_CURVE ( 'NONE', #43942, #47514, #74634, .T. ) ; +#48228 = FACE_OUTER_BOUND ( 'NONE', #76027, .T. ) ; +#48229 = AXIS2_PLACEMENT_3D ( 'NONE', #19735, #63274, #26006 ) ; +#48230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48231 = ORIENTED_EDGE ( 'NONE', *, *, #30018, .F. ) ; +#48232 = ORIENTED_EDGE ( 'NONE', *, *, #34882, .F. ) ; +#48233 = FACE_OUTER_BOUND ( 'NONE', #16940, .T. ) ; +#48234 = ORIENTED_EDGE ( 'NONE', *, *, #37008, .F. ) ; +#48235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48238 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48239 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 22.83333333333334300, -12.20555803803000600 ) ) ; +#48240 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#48241 = CONICAL_SURFACE ( 'NONE', #37953, 10.00000000000009200, 0.7853981633974447300 ) ; +#48242 = AXIS2_PLACEMENT_3D ( 'NONE', #51362, #14165, #57661 ) ; +#48243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48244 = CONICAL_SURFACE ( 'NONE', #43352, 10.50000000000009600, 0.7853981633974500600 ) ; +#48245 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124971800, 66.46717019299461500, -28.53914313452753100 ) ) ; +#48246 = ORIENTED_EDGE ( 'NONE', *, *, #80360, .T. ) ; +#48247 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80647, #6121, #49597, #12401 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001076191670833090700 ), + .UNSPECIFIED. ) ; +#48248 = FACE_OUTER_BOUND ( 'NONE', #30483, .T. ) ; +#48249 = ORIENTED_EDGE ( 'NONE', *, *, #8873, .F. ) ; +#48250 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819206200, 59.94924284854685900, -28.20555803802997700 ) ) ; +#48251 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 80.16749699759736800, -28.20555803803047800 ) ) ; +#48252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33773, #71036, #52512, #15283 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345296700, 0.0008131256040090140700 ), + .UNSPECIFIED. ) ; +#48254 = ORIENTED_EDGE ( 'NONE', *, *, #46614, .T. ) ; +#48255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48256 = AXIS2_PLACEMENT_3D ( 'NONE', #52726, #15494, #58997 ) ; +#48257 = CIRCLE ( 'NONE', #35275, 10.00000000000009200 ) ; +#48258 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 16.62623792124938400, -28.70555803802992800 ) ) ; +#48259 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12855, #50045, #25358, #68858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635004868200E-007, 0.0004064396303281605200 ), + .UNSPECIFIED. ) ; +#48260 = CIRCLE ( 'NONE', #27295, 10.00000000000009400 ) ; +#48261 = ORIENTED_EDGE ( 'NONE', *, *, #69761, .T. ) ; +#48262 = EDGE_CURVE ( 'NONE', #2137, #79804, #60183, .T. ) ; +#48263 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 57.33333333333335000, 3.124568980892187500 ) ) ; +#48264 = VERTEX_POINT ( 'NONE', #25499 ) ; +#48265 = CARTESIAN_POINT ( 'NONE', ( 22.81230111663344600, 6.093849441683267400, -24.97820584213144100 ) ) ; +#48266 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48267 = EDGE_LOOP ( 'NONE', ( #43846, #17319, #27695 ) ) ; +#48268 = EDGE_LOOP ( 'NONE', ( #48374, #68846, #42231, #38736 ) ) ; +#48269 = ORIENTED_EDGE ( 'NONE', *, *, #51263, .F. ) ; +#48270 = ORIENTED_EDGE ( 'NONE', *, *, #21555, .F. ) ; +#48271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48272 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#48273 = FACE_OUTER_BOUND ( 'NONE', #10532, .T. ) ; +#48274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48275 = CIRCLE ( 'NONE', #27525, 10.00000000000009400 ) ; +#48276 = CARTESIAN_POINT ( 'NONE', ( 9.963744891818969100, 79.94924284854664600, -28.20555803803014100 ) ) ; +#48277 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344057800, 17.92298334620733500, -28.20555803802993500 ) ) ; +#48279 = ORIENTED_EDGE ( 'NONE', *, *, #27880, .F. ) ; +#48278 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807117500, 86.79999999999992600, -28.70555803802997700 ) ) ; +#48280 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48281 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74981, #25495, #44188, #6964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066681692467717800E-007, 0.0004318395898544835600 ), + .UNSPECIFIED. ) ; +#48282 = VERTEX_POINT ( 'NONE', #19498 ) ; +#48283 = CARTESIAN_POINT ( 'NONE', ( 15.32706481948993000, 44.40566704911475400, -28.70129136469037700 ) ) ; +#48284 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260016100, 20.39965687931165300, -28.70555803803001600 ) ) ; +#48285 = PLANE ( 'NONE', #62073 ) ; +#48286 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#48287 = ORIENTED_EDGE ( 'NONE', *, *, #51872, .T. ) ; +#48288 = CIRCLE ( 'NONE', #26352, 10.50000000000009400 ) ; +#48289 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#48290 = EDGE_CURVE ( 'NONE', #7754, #51468, #45648, .T. ) ; +#48291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48292 = ORIENTED_EDGE ( 'NONE', *, *, #14384, .T. ) ; +#48293 = CONICAL_SURFACE ( 'NONE', #5829, 10.50000000000009600, 0.7853981633974500600 ) ; +#48294 = EDGE_CURVE ( 'NONE', #62197, #65971, #46640, .T. ) ; +#48295 = PLANE ( 'NONE', #14028 ) ; +#48296 = CONICAL_SURFACE ( 'NONE', #53287, 10.50000000000009600, 0.7853981633974500600 ) ; +#48297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48298 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#48299 = PLANE ( 'NONE', #43334 ) ; +#48300 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#48301 = EDGE_CURVE ( 'NONE', #75159, #6449, #77815, .T. ) ; +#48302 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#48303 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000433400, 16.62623792124944100, -28.70555803803025800 ) ) ; +#48304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50515, #69054, #19558, #63085 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534732500 ), + .UNSPECIFIED. ) ; +#48305 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#48306 = ORIENTED_EDGE ( 'NONE', *, *, #62636, .T. ) ; +#48307 = ADVANCED_FACE ( 'NONE', ( #30171 ), #75857, .F. ) ; +#48308 = EDGE_CURVE ( 'NONE', #70223, #28207, #31261, .T. ) ; +#48309 = AXIS2_PLACEMENT_3D ( 'NONE', #29580, #73084, #35805 ) ; +#48310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48311 = CIRCLE ( 'NONE', #44287, 9.500000000000099500 ) ; +#48313 = ORIENTED_EDGE ( 'NONE', *, *, #21990, .T. ) ; +#48312 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#48314 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 80.13716795162658000, -28.48697406221668500 ) ) ; +#48315 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 63.66666666666665700, -6.705558038030000400 ) ) ; +#48316 = CONICAL_SURFACE ( 'NONE', #21210, 10.00000000000009400, 0.7853981633974447300 ) ; +#48317 = VERTEX_POINT ( 'NONE', #32536 ) ; +#48318 = ORIENTED_EDGE ( 'NONE', *, *, #60014, .F. ) ; +#48319 = ADVANCED_FACE ( 'NONE', ( #17507 ), #42761, .F. ) ; +#48320 = CIRCLE ( 'NONE', #20187, 10.00000000000009400 ) ; +#48321 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 28.83333333333333900, 0.1341879241256075400 ) ) ; +#48322 = AXIS2_PLACEMENT_3D ( 'NONE', #2593, #71419, #2320 ) ; +#48323 = AXIS2_PLACEMENT_3D ( 'NONE', #29959, #73440, #36173 ) ; +#48324 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48325 = EDGE_LOOP ( 'NONE', ( #56589, #47891, #26232 ) ) ; +#48326 = EDGE_CURVE ( 'NONE', #52738, #29731, #16791, .T. ) ; +#48327 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467681300, 40.76893971292317100, -28.57333386111099200 ) ) ; +#48328 = EDGE_CURVE ( 'NONE', #77798, #59962, #11648, .T. ) ; +#48329 = AXIS2_PLACEMENT_3D ( 'NONE', #8294, #51801, #76575 ) ; +#48330 = CIRCLE ( 'NONE', #30161, 9.500000000000099500 ) ; +#48331 = CIRCLE ( 'NONE', #4760, 9.500000000000099500 ) ; +#48332 = EDGE_LOOP ( 'NONE', ( #41043, #71407, #79734, #13508 ) ) ; +#48333 = CARTESIAN_POINT ( 'NONE', ( -7.372489514352175800, 44.45000000000001700, 3.160935144277583500 ) ) ; +#48334 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 31.16666666666667100, 1.741883078712356500 ) ) ; +#48335 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714800, 49.85339758437810100, -28.20555803802996700 ) ) ; +#48336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48338 = EDGE_CURVE ( 'NONE', #54615, #40146, #2286, .T. ) ; +#48339 = VERTEX_POINT ( 'NONE', #20305 ) ; +#48340 = AXIS2_PLACEMENT_3D ( 'NONE', #77900, #40625, #3354 ) ; +#48341 = AXIS2_PLACEMENT_3D ( 'NONE', #6997, #50481, #13286 ) ; +#48342 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48343 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#48344 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48345 = ADVANCED_FACE ( 'NONE', ( #28218 ), #73935, .T. ) ; +#48346 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48347 = CARTESIAN_POINT ( 'NONE', ( 20.30705233044418300, 7.346475732532450600, -27.18116052742384900 ) ) ; +#48348 = CONICAL_SURFACE ( 'NONE', #37605, 10.00000000000009400, 0.7853981633974447300 ) ; +#48349 = EDGE_LOOP ( 'NONE', ( #9726, #71963, #28364 ) ) ; +#48350 = CARTESIAN_POINT ( 'NONE', ( -2.497924978448501100, 90.99854748491415500, -28.70555803803014400 ) ) ; +#48351 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#48352 = EDGE_LOOP ( 'NONE', ( #23741, #24346, #5791, #43529 ) ) ; +#48353 = VERTEX_POINT ( 'NONE', #64113 ) ; +#48354 = VERTEX_POINT ( 'NONE', #26829 ) ; +#48355 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48357 = ORIENTED_EDGE ( 'NONE', *, *, #18321, .T. ) ; +#48358 = CARTESIAN_POINT ( 'NONE', ( 19.01531971918288000, 99.63064009050997100, -24.66451185557598100 ) ) ; +#48359 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#48360 = FACE_OUTER_BOUND ( 'NONE', #32059, .T. ) ; +#48361 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492439700, 50.20543520232830300, -28.70555803802996700 ) ) ; +#48362 = ORIENTED_EDGE ( 'NONE', *, *, #61083, .F. ) ; +#48363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48364 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100656400, 28.12363993080087000, -28.38670679782166700 ) ) ; +#48365 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22540, #28842, #4034, #47518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019567178915000E-007, 0.0004669842289006385000 ), + .UNSPECIFIED. ) ; +#48367 = CARTESIAN_POINT ( 'NONE', ( 17.90233405034981500, 81.36492161058528400, -28.27580420063998900 ) ) ; +#48368 = CIRCLE ( 'NONE', #1750, 10.50000000000009900 ) ; +#48369 = AXIS2_PLACEMENT_3D ( 'NONE', #56141, #62414, #6118 ) ; +#48370 = EDGE_LOOP ( 'NONE', ( #33762, #71256, #22239, #36749, #41455 ) ) ; +#48371 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 34.66666666666667900, -8.133761268305512700 ) ) ; +#48372 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48373 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#48374 = ORIENTED_EDGE ( 'NONE', *, *, #47322, .F. ) ; +#48375 = FACE_OUTER_BOUND ( 'NONE', #36010, .T. ) ; +#48376 = CONICAL_SURFACE ( 'NONE', #41254, 10.00000000000009400, 0.7853981633974447300 ) ; +#48377 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 20.86172549728275200, -28.47230003642272300 ) ) ; +#48378 = AXIS2_PLACEMENT_3D ( 'NONE', #39049, #1789, #45284 ) ; +#48379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48380 = CARTESIAN_POINT ( 'NONE', ( -4.890693870543882900, 57.15000000000004800, -9.326327571910287200 ) ) ; +#48381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40813, #78087, #9820, #53324 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.340489101601632800E-016, 0.001246264537622208000 ), + .UNSPECIFIED. ) ; +#48382 = ORIENTED_EDGE ( 'NONE', *, *, #16303, .F. ) ; +#48383 = EDGE_CURVE ( 'NONE', #5570, #11824, #68640, .T. ) ; +#48384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48385 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48386 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48388 = FACE_OUTER_BOUND ( 'NONE', #72296, .T. ) ; +#48389 = EDGE_LOOP ( 'NONE', ( #60825, #77281, #39050 ) ) ; +#48390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70702, #8673, #27489, #70979 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248246900, 0.0008027336008623821200 ), + .UNSPECIFIED. ) ; +#48391 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 90.16054007504463600, -28.34042301926880800 ) ) ; +#48392 = ORIENTED_EDGE ( 'NONE', *, *, #66352, .T. ) ; +#48393 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48394 = FACE_OUTER_BOUND ( 'NONE', #14030, .T. ) ; +#48395 = EDGE_LOOP ( 'NONE', ( #69564, #16468, #77980, #27729 ) ) ; +#48396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61890, #18357, #24615, #68126 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459159356217000E-007, 0.0007679767755145101100 ), + .UNSPECIFIED. ) ; +#48397 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.87738371066727800, -28.70555803802994200 ) ) ; +#48398 = ADVANCED_FACE ( 'NONE', ( #23350 ), #40812, .T. ) ; +#48399 = CONICAL_SURFACE ( 'NONE', #30734, 10.50000000000009600, 0.7853981633974500600 ) ; +#48401 = EDGE_CURVE ( 'NONE', #46138, #12492, #57364, .T. ) ; +#48400 = ORIENTED_EDGE ( 'NONE', *, *, #4739, .T. ) ; +#48402 = EDGE_CURVE ( 'NONE', #22541, #30178, #54159, .T. ) ; +#48403 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488106500, 51.99560977511662700, -28.70555803802997700 ) ) ; +#48404 = EDGE_LOOP ( 'NONE', ( #75443, #68369, #24536 ) ) ; +#48405 = ADVANCED_FACE ( 'NONE', ( #44660 ), #71987, .F. ) ; +#48406 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 3.166666666666668700, -6.205558038030004800 ) ) ; +#48407 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 71.46283204837337200, -28.48697406221667400 ) ) ; +#48408 = EDGE_CURVE ( 'NONE', #43689, #3723, #39701, .T. ) ; +#48409 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 43.33333333333334300, -8.133761268305512700 ) ) ; +#48410 = CONICAL_SURFACE ( 'NONE', #59289, 10.00000000000009600, 0.7853981633974482800 ) ; +#48411 = EDGE_CURVE ( 'NONE', #25204, #43447, #25267, .T. ) ; +#48412 = CONICAL_SURFACE ( 'NONE', #567, 10.00000000000009400, 0.7853981633974447300 ) ; +#48413 = ORIENTED_EDGE ( 'NONE', *, *, #20578, .T. ) ; +#48414 = AXIS2_PLACEMENT_3D ( 'NONE', #18302, #61841, #24556 ) ; +#48415 = ORIENTED_EDGE ( 'NONE', *, *, #70720, .F. ) ; +#48416 = VERTEX_POINT ( 'NONE', #58629 ) ; +#48417 = ADVANCED_FACE ( 'NONE', ( #7699 ), #38837, .F. ) ; +#48418 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48419 = ORIENTED_EDGE ( 'NONE', *, *, #8678, .F. ) ; +#48420 = ORIENTED_EDGE ( 'NONE', *, *, #30943, .T. ) ; +#48421 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 8.500000000000008900, 4.650848422521012700 ) ) ; +#48422 = ORIENTED_EDGE ( 'NONE', *, *, #15384, .F. ) ; +#48423 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 90.13716795162659400, -28.48697406221667400 ) ) ; +#48424 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999895600, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48425 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48426 = ORIENTED_EDGE ( 'NONE', *, *, #6850, .F. ) ; +#48427 = AXIS2_PLACEMENT_3D ( 'NONE', #2677, #70700, #77230 ) ; +#48428 = EDGE_CURVE ( 'NONE', #76799, #49715, #63242, .T. ) ; +#48429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48430 = EDGE_CURVE ( 'NONE', #24894, #53776, #26254, .T. ) ; +#48431 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55334, #24355, #61897, #24619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691922654500E-007, 0.0008724363063894229300 ), + .UNSPECIFIED. ) ; +#48432 = EDGE_CURVE ( 'NONE', #18527, #11257, #10804, .T. ) ; +#48433 = ADVANCED_FACE ( 'NONE', ( #59326 ), #15391, .T. ) ; +#48434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48435 = AXIS2_PLACEMENT_3D ( 'NONE', #41122, #3841, #47336 ) ; +#48436 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48437 = ORIENTED_EDGE ( 'NONE', *, *, #37331, .T. ) ; +#48438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48439 = CONICAL_SURFACE ( 'NONE', #56921, 10.00000000000009200, 0.7853981633974447300 ) ; +#48440 = AXIS2_PLACEMENT_3D ( 'NONE', #35471, #29503, #47921 ) ; +#48441 = VERTEX_POINT ( 'NONE', #27932 ) ; +#48442 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484490400, 51.01872124563913500, -28.53757464917579200 ) ) ; +#48443 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#48444 = ORIENTED_EDGE ( 'NONE', *, *, #42101, .T. ) ; +#48445 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#48446 = CARTESIAN_POINT ( 'NONE', ( 16.41529105773326300, 94.43058211546652100, -28.29658534940813700 ) ) ; +#48447 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#48448 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48449 = FACE_OUTER_BOUND ( 'NONE', #29786, .T. ) ; +#48450 = EDGE_CURVE ( 'NONE', #76395, #72149, #9677, .T. ) ; +#48451 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#48452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48453 = PLANE ( 'NONE', #66114 ) ; +#48454 = AXIS2_PLACEMENT_3D ( 'NONE', #25953, #32188, #75685 ) ; +#48455 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 31.17701665379185600, -28.20555803802995200 ) ) ; +#48456 = AXIS2_PLACEMENT_3D ( 'NONE', #64751, #52166, #21216 ) ; +#48457 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819192900, 51.65075715145311400, -28.20555803802997700 ) ) ; +#48458 = EDGE_LOOP ( 'NONE', ( #1936, #50219, #5309, #5253 ) ) ; +#48459 = CARTESIAN_POINT ( 'NONE', ( -3.160449548280999100, 90.46231468379684800, -28.37082013777828800 ) ) ; +#48460 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811158200, 87.05460903980839800, -28.69802137271993900 ) ) ; +#48461 = CONICAL_SURFACE ( 'NONE', #24461, 10.00000000000009400, 0.7853981633974447300 ) ; +#48462 = ORIENTED_EDGE ( 'NONE', *, *, #46979, .T. ) ; +#48463 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 63.65857157145661200, -28.20555803803030800 ) ) ; +#48464 = ORIENTED_EDGE ( 'NONE', *, *, #10747, .F. ) ; +#48465 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 96.59999999999999400, 16.29444196196999100 ) ) ; +#48466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#48468 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180800000, 51.65075715145310700, -28.20555803802997700 ) ) ; +#48469 = CONICAL_SURFACE ( 'NONE', #47852, 10.50000000000009600, 0.7853981633974482800 ) ; +#48470 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15781, #53015, #65579, #28336 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709832500, 0.0006599881756735987400 ), + .UNSPECIFIED. ) ; +#48471 = ORIENTED_EDGE ( 'NONE', *, *, #46870, .F. ) ; +#48472 = ORIENTED_EDGE ( 'NONE', *, *, #66789, .F. ) ; +#48473 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 49.33333333333335000, -5.205558038030008400 ) ) ; +#48474 = CARTESIAN_POINT ( 'NONE', ( 15.88358847659974900, 90.15151454780776400, -28.67627428870322600 ) ) ; +#48475 = AXIS2_PLACEMENT_3D ( 'NONE', #50379, #19152, #56675 ) ; +#48476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48477 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 60.36203212531316400, -28.38801640354855500 ) ) ; +#48478 = ADVANCED_FACE ( 'NONE', ( #24291 ), #52891, .T. ) ; +#48479 = EDGE_CURVE ( 'NONE', #43592, #51058, #77112, .T. ) ; +#48480 = CONICAL_SURFACE ( 'NONE', #68101, 10.50000000000009600, 0.7853981633974482800 ) ; +#48481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48482 = CONICAL_SURFACE ( 'NONE', #77669, 10.00000000000009400, 0.7853981633974447300 ) ; +#48483 = ORIENTED_EDGE ( 'NONE', *, *, #74277, .T. ) ; +#48484 = EDGE_LOOP ( 'NONE', ( #40717, #60377, #56970, #524 ) ) ; +#48485 = AXIS2_PLACEMENT_3D ( 'NONE', #63629, #1304, #76103 ) ; +#48486 = VERTEX_POINT ( 'NONE', #65708 ) ; +#48487 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48488 = FACE_OUTER_BOUND ( 'NONE', #698, .T. ) ; +#48489 = ORIENTED_EDGE ( 'NONE', *, *, #52399, .T. ) ; +#48490 = ORIENTED_EDGE ( 'NONE', *, *, #6302, .F. ) ; +#48491 = ORIENTED_EDGE ( 'NONE', *, *, #35246, .F. ) ; +#48492 = EDGE_LOOP ( 'NONE', ( #25127, #78042, #19833 ) ) ; +#48493 = VERTEX_POINT ( 'NONE', #53165 ) ; +#48494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48495 = ORIENTED_EDGE ( 'NONE', *, *, #4373, .F. ) ; +#48496 = ADVANCED_FACE ( 'NONE', ( #5787 ), #28477, .T. ) ; +#48497 = ORIENTED_EDGE ( 'NONE', *, *, #46671, .F. ) ; +#48498 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715600, 70.34267608797551900, -28.20555803803014400 ) ) ; +#48499 = PLANE ( 'NONE', #46627 ) ; +#48500 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20972, #58206, #33460, #76981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736382147600E-007, 0.0009376786059871911500 ), + .UNSPECIFIED. ) ; +#48501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48502 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748478600, 81.37838321498783500, -28.29547179040479700 ) ) ; +#48503 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 20.66666666666668600, 8.320721403598824400 ) ) ; +#48504 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609688800, 70.13716795162660800, -28.48697406221658900 ) ) ; +#48505 = FACE_OUTER_BOUND ( 'NONE', #42745, .T. ) ; +#48506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48508 = EDGE_CURVE ( 'NONE', #62167, #49795, #62656, .T. ) ; +#48509 = EDGE_LOOP ( 'NONE', ( #9277, #38990, #67398, #80469 ) ) ; +#48510 = ORIENTED_EDGE ( 'NONE', *, *, #11191, .F. ) ; +#48511 = ADVANCED_FACE ( 'NONE', ( #55401 ), #68067, .F. ) ; +#48512 = ORIENTED_EDGE ( 'NONE', *, *, #72808, .F. ) ; +#48513 = EDGE_CURVE ( 'NONE', #42352, #27173, #48151, .T. ) ; +#48514 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818961900, 79.94924284854708700, -28.20555803802997700 ) ) ; +#48515 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#48516 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48517 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263204800, 14.04999999999951400, -28.70555803803025800 ) ) ; +#48518 = CIRCLE ( 'NONE', #43728, 9.500000000000099500 ) ; +#48519 = ORIENTED_EDGE ( 'NONE', *, *, #40954, .T. ) ; +#48520 = EDGE_CURVE ( 'NONE', #10719, #26238, #20383, .T. ) ; +#48521 = VERTEX_POINT ( 'NONE', #53711 ) ; +#48522 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13118, #69117, #7086, #50583 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001511925583809461200, 0.002290256320676508800 ), + .UNSPECIFIED. ) ; +#48523 = ADVANCED_FACE ( 'NONE', ( #22330 ), #18424, .F. ) ; +#48524 = EDGE_CURVE ( 'NONE', #67964, #12898, #33729, .T. ) ; +#48525 = AXIS2_PLACEMENT_3D ( 'NONE', #43656, #165, #6429 ) ; +#48526 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48527 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 55.16666666666667900, -6.205558038030004800 ) ) ; +#48528 = EDGE_CURVE ( 'NONE', #17606, #72397, #19266, .T. ) ; +#48529 = FACE_OUTER_BOUND ( 'NONE', #80404, .T. ) ; +#48530 = CARTESIAN_POINT ( 'NONE', ( 16.68720606474875000, 6.625587870501353100, -28.19902840602357200 ) ) ; +#48531 = ORIENTED_EDGE ( 'NONE', *, *, #22075, .T. ) ; +#48532 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.65857157145700300, -28.20555803802997700 ) ) ; +#48533 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507522100, 29.20543520232828500, -28.70555803802994200 ) ) ; +#48534 = VERTEX_POINT ( 'NONE', #29287 ) ; +#48535 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48536 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 80.34267608797598800, -28.20555803802997700 ) ) ; +#48537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48538 = AXIS2_PLACEMENT_3D ( 'NONE', #16068, #22324, #65854 ) ; +#48539 = EDGE_CURVE ( 'NONE', #10125, #4075, #4792, .T. ) ; +#48540 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48541 = EDGE_CURVE ( 'NONE', #37317, #76771, #34989, .T. ) ; +#48542 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548954100, 9.940690926013790100, -28.35186440610860700 ) ) ; +#48543 = EDGE_CURVE ( 'NONE', #54382, #57816, #71124, .T. ) ; +#48544 = CARTESIAN_POINT ( 'NONE', ( 2.044746536350031200E-013, 78.17143691309404100, -28.36981695106791100 ) ) ; +#48545 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -18.70555803803001300 ) ) ; +#48546 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#48547 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#48548 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#48549 = AXIS2_PLACEMENT_3D ( 'NONE', #36863, #80423, #43135 ) ; +#48550 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000004100, 22.99926474563217500, -28.70555803802995200 ) ) ; +#48551 = CIRCLE ( 'NONE', #35851, 10.50000000000009900 ) ; +#48552 = FACE_OUTER_BOUND ( 'NONE', #16195, .T. ) ; +#48553 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48554 = EDGE_LOOP ( 'NONE', ( #27161, #47709, #40618 ) ) ; +#48555 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2717, #71290, #9248, #52777 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871337448200E-007, 0.0002930369617398659000 ), + .UNSPECIFIED. ) ; +#48556 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#48557 = EDGE_LOOP ( 'NONE', ( #50900, #41485, #19834, #55643 ) ) ; +#48558 = EDGE_CURVE ( 'NONE', #49007, #32364, #51465, .T. ) ; +#48559 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459495800, 72.51973550835650400, -28.70555803803009800 ) ) ; +#48560 = AXIS2_PLACEMENT_3D ( 'NONE', #65820, #28579, #72086 ) ; +#48561 = AXIS2_PLACEMENT_3D ( 'NONE', #22692, #28998, #59970 ) ; +#48562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48563 = VERTEX_POINT ( 'NONE', #4730 ) ; +#48564 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459582800, 52.51973550835659000, -28.70555803802997400 ) ) ; +#48565 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#48566 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040000, 71.43250300240211500, -28.20555803803014400 ) ) ; +#48567 = CIRCLE ( 'NONE', #21189, 10.50000000000009200 ) ; +#48568 = ORIENTED_EDGE ( 'NONE', *, *, #37592, .T. ) ; +#48569 = CYLINDRICAL_SURFACE ( 'NONE', #1528, 10.00000000000000200 ) ; +#48570 = EDGE_LOOP ( 'NONE', ( #19764, #14362, #56879 ) ) ; +#48571 = ORIENTED_EDGE ( 'NONE', *, *, #29804, .F. ) ; +#48572 = CARTESIAN_POINT ( 'NONE', ( 12.81094891286177000, 8.905953890812412500, -28.64557659445530600 ) ) ; +#48573 = VERTEX_POINT ( 'NONE', #60258 ) ; +#48574 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 61.50000000000001400, 6.847000845227641200 ) ) ; +#48575 = FACE_OUTER_BOUND ( 'NONE', #6627, .T. ) ; +#48576 = ORIENTED_EDGE ( 'NONE', *, *, #74825, .T. ) ; +#48577 = EDGE_LOOP ( 'NONE', ( #15718, #53367, #52874, #17789 ) ) ; +#48578 = ORIENTED_EDGE ( 'NONE', *, *, #77732, .T. ) ; +#48580 = ORIENTED_EDGE ( 'NONE', *, *, #24969, .T. ) ; +#48579 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#48581 = ORIENTED_EDGE ( 'NONE', *, *, #71746, .T. ) ; +#48582 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 26.66666666666668600, -3.705558038030004400 ) ) ; +#48583 = ORIENTED_EDGE ( 'NONE', *, *, #41052, .T. ) ; +#48584 = CARTESIAN_POINT ( 'NONE', ( -12.53318012365767400, 75.79999999999999700, -28.37307693585060900 ) ) ; +#48585 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48586 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48587 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 51.25732391202386400, -28.20555803803014400 ) ) ; +#48588 = AXIS2_PLACEMENT_3D ( 'NONE', #21403, #46106, #8311 ) ; +#48589 = VERTEX_POINT ( 'NONE', #23524 ) ; +#48590 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48591 = CONICAL_SURFACE ( 'NONE', #11996, 10.50000000000009800, 0.7853981633974518300 ) ; +#48592 = ORIENTED_EDGE ( 'NONE', *, *, #59538, .T. ) ; +#48593 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 10.00000000000000000, -28.70555803803001300 ) ) ; +#48594 = EDGE_CURVE ( 'NONE', #71807, #4291, #36902, .T. ) ; +#48595 = ORIENTED_EDGE ( 'NONE', *, *, #42331, .T. ) ; +#48596 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 29.00000000000001800, -1.205558038030002800 ) ) ; +#48597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48598 = ORIENTED_EDGE ( 'NONE', *, *, #56052, .F. ) ; +#48599 = EDGE_LOOP ( 'NONE', ( #80707, #38250, #18260, #75225, #29541 ) ) ; +#48600 = AXIS2_PLACEMENT_3D ( 'NONE', #23426, #29716, #60698 ) ; +#48601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48602 = FACE_OUTER_BOUND ( 'NONE', #33706, .T. ) ; +#48603 = EDGE_LOOP ( 'NONE', ( #38124, #52195, #16765 ) ) ; +#48604 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#48605 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#48606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48608 = ORIENTED_EDGE ( 'NONE', *, *, #20816, .F. ) ; +#48607 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939078500, 14.68533208989805400, -28.53910738522642300 ) ) ; +#48609 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53143, #9635, #71939, #34676 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485549318643800E-007, 0.0009605145132137878600 ), + .UNSPECIFIED. ) ; +#48610 = CARTESIAN_POINT ( 'NONE', ( -4.446507817030902900, 89.37488905615671800, -28.55192314908693500 ) ) ; +#48611 = CARTESIAN_POINT ( 'NONE', ( 5.685965509778318600, 45.54999999999998300, -28.37321477197630400 ) ) ; +#48612 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48613 = AXIS2_PLACEMENT_3D ( 'NONE', #20250, #76264, #32747 ) ; +#48614 = DIRECTION ( 'NONE', ( -1.000000000000000000, 9.912705577010291000E-016, 0.0000000000000000000 ) ) ; +#48615 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#48616 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48617 = FACE_OUTER_BOUND ( 'NONE', #62805, .T. ) ; +#48618 = ORIENTED_EDGE ( 'NONE', *, *, #66770, .T. ) ; +#48619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48620 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148834800, 46.50238095238052000, -28.70555803802996700 ) ) ; +#48621 = ORIENTED_EDGE ( 'NONE', *, *, #45694, .T. ) ; +#48622 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#48623 = CARTESIAN_POINT ( 'NONE', ( 17.82394323707824300, 97.24788649198447400, -26.95791713313520800 ) ) ; +#48624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48625 = EDGE_LOOP ( 'NONE', ( #55600, #52086, #60758 ) ) ; +#48626 = ADVANCED_FACE ( 'NONE', ( #3815 ), #67033, .T. ) ; +#48627 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428150200, 81.52858243452095600, -28.70555803803030800 ) ) ; +#48628 = ADVANCED_FACE ( 'NONE', ( #53465 ), #80706, .T. ) ; +#48629 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 59.77559325427183300, -28.45987523529581900 ) ) ; +#48630 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 30.56914835874665600, -28.45573375118225500 ) ) ; +#48631 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730249500, 51.58737389638851300, -28.29936525552453800 ) ) ; +#48632 = EDGE_CURVE ( 'NONE', #64284, #28313, #16483, .T. ) ; +#48633 = CONICAL_SURFACE ( 'NONE', #38545, 10.50000000000009600, 0.7853981633974518300 ) ; +#48634 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 32.50000000000001400, 4.650848422521016300 ) ) ; +#48635 = CARTESIAN_POINT ( 'NONE', ( 2.760105492671752500, 59.66414768974043900, -28.38420446581291000 ) ) ; +#48636 = EDGE_CURVE ( 'NONE', #36688, #31243, #66136, .T. ) ; +#48637 = CIRCLE ( 'NONE', #69694, 10.50000000000009600 ) ; +#48638 = EDGE_LOOP ( 'NONE', ( #20453, #130, #14309, #73218, #3922, #22081 ) ) ; +#48639 = CARTESIAN_POINT ( 'NONE', ( 2.279233496941953000, 70.09951448976247000, -28.63282631410046300 ) ) ; +#48640 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48641 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285715300, 53.67681279774500800, -28.70555803802997700 ) ) ; +#48642 = CARTESIAN_POINT ( 'NONE', ( 3.406123189448131000, 57.14999999999999900, -9.771249665744319300 ) ) ; +#48643 = EDGE_CURVE ( 'NONE', #59810, #26103, #69989, .T. ) ; +#48644 = CIRCLE ( 'NONE', #9096, 9.500000000000099500 ) ; +#48645 = EDGE_LOOP ( 'NONE', ( #34207, #18736, #13591, #66473 ) ) ; +#48646 = EDGE_LOOP ( 'NONE', ( #22943, #17032, #24979, #36348 ) ) ; +#48647 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489758300, 18.15930907398603000, -28.35186440610867500 ) ) ; +#48648 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825121300, 51.43945992495515900, -28.34042301926892500 ) ) ; +#48649 = EDGE_CURVE ( 'NONE', #52657, #25682, #56645, .T. ) ; +#48650 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48651 = EDGE_CURVE ( 'NONE', #51757, #66575, #42165, .T. ) ; +#48652 = ORIENTED_EDGE ( 'NONE', *, *, #42723, .T. ) ; +#48653 = CIRCLE ( 'NONE', #65771, 10.50000000000009600 ) ; +#48654 = VERTEX_POINT ( 'NONE', #24325 ) ; +#48655 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#48656 = ORIENTED_EDGE ( 'NONE', *, *, #8738, .T. ) ; +#48657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44599, #32157, #63444, #26185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.201387737496130400E-016, 0.001246264537621956300 ), + .UNSPECIFIED. ) ; +#48658 = ORIENTED_EDGE ( 'NONE', *, *, #61943, .F. ) ; +#48659 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#48660 = EDGE_LOOP ( 'NONE', ( #47931, #27971, #9855, #22643 ) ) ; +#48661 = ORIENTED_EDGE ( 'NONE', *, *, #61393, .T. ) ; +#48662 = AXIS2_PLACEMENT_3D ( 'NONE', #76073, #38789, #1548 ) ; +#48663 = EDGE_CURVE ( 'NONE', #10560, #3242, #27768, .T. ) ; +#48664 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.73796787468680200, -28.38801640354855500 ) ) ; +#48665 = EDGE_CURVE ( 'NONE', #19874, #75642, #17331, .T. ) ; +#48666 = EDGE_CURVE ( 'NONE', #49283, #74910, #33009, .T. ) ; +#48667 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#48668 = FACE_OUTER_BOUND ( 'NONE', #28293, .T. ) ; +#48669 = EDGE_LOOP ( 'NONE', ( #9354, #2219, #42406, #20765, #6945 ) ) ; +#48670 = PLANE ( 'NONE', #74090 ) ; +#48671 = ORIENTED_EDGE ( 'NONE', *, *, #65388, .F. ) ; +#48672 = EDGE_LOOP ( 'NONE', ( #23434, #80080, #41801 ) ) ; +#48673 = ORIENTED_EDGE ( 'NONE', *, *, #27533, .T. ) ; +#48674 = ORIENTED_EDGE ( 'NONE', *, *, #66941, .F. ) ; +#48675 = ORIENTED_EDGE ( 'NONE', *, *, #27132, .F. ) ; +#48676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48677 = CONICAL_SURFACE ( 'NONE', #78565, 10.50000000000009200, 0.7853981633974482800 ) ; +#48678 = AXIS2_PLACEMENT_3D ( 'NONE', #18353, #36828, #80631 ) ; +#48679 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 1.000000000000004200, 3.794441961969998300 ) ) ; +#48680 = AXIS2_PLACEMENT_3D ( 'NONE', #47865, #10647, #54131 ) ; +#48681 = ORIENTED_EDGE ( 'NONE', *, *, #6302, .T. ) ; +#48682 = AXIS2_PLACEMENT_3D ( 'NONE', #30055, #61043, #73543 ) ; +#48683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48684 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 83.99926474563204700, -28.70555803803007700 ) ) ; +#48685 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 41.16666666666665700, 6.794441961969992500 ) ) ; +#48686 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48688 = FACE_OUTER_BOUND ( 'NONE', #28234, .T. ) ; +#48689 = ORIENTED_EDGE ( 'NONE', *, *, #2077, .F. ) ; +#48690 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000000400, 81.43250300240228500, -28.20555803802997700 ) ) ; +#48691 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48692 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 6.333333333333343700, -8.133761268305512700 ) ) ; +#48694 = ORIENTED_EDGE ( 'NONE', *, *, #67045, .F. ) ; +#48693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48695 = AXIS2_PLACEMENT_3D ( 'NONE', #65510, #28262, #71754 ) ; +#48696 = EDGE_CURVE ( 'NONE', #39193, #26468, #2839, .T. ) ; +#48697 = CARTESIAN_POINT ( 'NONE', ( 4.745461813558602400, 49.59617548195239300, -28.64146967277547900 ) ) ; +#48698 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#48700 = ADVANCED_FACE ( 'NONE', ( #64189 ), #62219, .F. ) ; +#48699 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39206, #76482, #51700, #14480 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674960996100E-007, 0.0007987728781051750500 ), + .UNSPECIFIED. ) ; +#48701 = CARTESIAN_POINT ( 'NONE', ( 15.20655873232856700, 38.56067300957096900, -28.70555803803001600 ) ) ; +#48702 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48703 = CARTESIAN_POINT ( 'NONE', ( -17.22125914545564400, 28.66476764525111100, -28.30311733712046200 ) ) ; +#48704 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274457400, 49.80622828441262600, -28.24172590004350200 ) ) ; +#48705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48706 = FACE_OUTER_BOUND ( 'NONE', #67336, .T. ) ; +#48707 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48709 = EDGE_CURVE ( 'NONE', #2940, #31548, #78779, .T. ) ; +#48708 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61299, #17763, #73788, #36491 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625869030613800E-007, 0.0002930369617396957400 ), + .UNSPECIFIED. ) ; +#48710 = CARTESIAN_POINT ( 'NONE', ( 11.74546181355897000, 18.09617548195219400, -28.64146967277573100 ) ) ; +#48711 = ORIENTED_EDGE ( 'NONE', *, *, #58037, .T. ) ; +#48712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48713 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384630600, 70.79999999999998300, -28.55171188418376000 ) ) ; +#48714 = EDGE_LOOP ( 'NONE', ( #12972, #30157, #75778 ) ) ; +#48715 = AXIS2_PLACEMENT_3D ( 'NONE', #57776, #45221, #76265 ) ; +#48716 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48717 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#48718 = ORIENTED_EDGE ( 'NONE', *, *, #19011, .F. ) ; +#48719 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14336, #51274, #64140, #26855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884745500 ), + .UNSPECIFIED. ) ; +#48720 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48721 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#48722 = ADVANCED_FACE ( 'NONE', ( #49523 ), #12582, .F. ) ; +#48723 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868595900, 80.01994747561619200, -28.24986299608853100 ) ) ; +#48724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39254, #1990, #58038, #20788 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866729188900E-007, 0.001076778502991522600 ), + .UNSPECIFIED. ) ; +#48728 = CONICAL_SURFACE ( 'NONE', #27878, 10.00000000000009400, 0.7853981633974447300 ) ; +#48729 = ORIENTED_EDGE ( 'NONE', *, *, #12135, .T. ) ; +#48730 = AXIS2_PLACEMENT_3D ( 'NONE', #62419, #25154, #68670 ) ; +#48731 = EDGE_LOOP ( 'NONE', ( #1123, #12377, #79228 ) ) ; +#48732 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408281600, 9.714133746421508100, -28.27331438134755000 ) ) ; +#48733 = CIRCLE ( 'NONE', #32855, 10.50000000000009800 ) ; +#48734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48735 = VERTEX_POINT ( 'NONE', #49826 ) ; +#48736 = VERTEX_POINT ( 'NONE', #12620 ) ; +#48737 = EDGE_LOOP ( 'NONE', ( #68686, #46933, #6365 ) ) ; +#48738 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.03751622186547400, -28.32723995587591000 ) ) ; +#48739 = EDGE_LOOP ( 'NONE', ( #73646, #70132, #78733 ) ) ; +#48740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48741 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 60.16054007504464400, -28.34042301926880500 ) ) ; +#48742 = AXIS2_PLACEMENT_3D ( 'NONE', #33604, #64914, #58626 ) ; +#48743 = CIRCLE ( 'NONE', #75517, 10.00000000000009200 ) ; +#48744 = PLANE ( 'NONE', #65442 ) ; +#48745 = ADVANCED_FACE ( 'NONE', ( #31091 ), #60279, .T. ) ; +#48746 = CIRCLE ( 'NONE', #58804, 10.50000000000009600 ) ; +#48747 = EDGE_CURVE ( 'NONE', #56169, #46026, #69170, .T. ) ; +#48748 = ORIENTED_EDGE ( 'NONE', *, *, #45032, .T. ) ; +#48749 = EDGE_LOOP ( 'NONE', ( #64489, #9235, #49828, #39097, #27165 ) ) ; +#48750 = ORIENTED_EDGE ( 'NONE', *, *, #39239, .F. ) ; +#48751 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48752 = ORIENTED_EDGE ( 'NONE', *, *, #77625, .F. ) ; +#48753 = ORIENTED_EDGE ( 'NONE', *, *, #34144, .T. ) ; +#48754 = ORIENTED_EDGE ( 'NONE', *, *, #44814, .T. ) ; +#48755 = CONICAL_SURFACE ( 'NONE', #19069, 10.50000000000009600, 0.7853981633974500600 ) ; +#48756 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 47.16666666666667900, 0.9380355014189834000 ) ) ; +#48757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48758 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29092, #22787, #60071, #72574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728439036986100E-007, 0.0007763347809200209700 ), + .UNSPECIFIED. ) ; +#48759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48760 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280406100, 43.65857157145702400, -28.37229765499282100 ) ) ; +#48761 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#48762 = EDGE_LOOP ( 'NONE', ( #72601, #50935, #3022 ) ) ; +#48763 = CARTESIAN_POINT ( 'NONE', ( -15.16868429911838600, 33.69769540679922000, -28.70555803803001600 ) ) ; +#48764 = EDGE_CURVE ( 'NONE', #58803, #59252, #14519, .T. ) ; +#48765 = CONICAL_SURFACE ( 'NONE', #13865, 10.50000000000009600, 0.7853981633974500600 ) ; +#48767 = ORIENTED_EDGE ( 'NONE', *, *, #12613, .T. ) ; +#48766 = CARTESIAN_POINT ( 'NONE', ( -2.042760264135453900, 85.79999999999984100, -28.53819074160701800 ) ) ; +#48768 = CARTESIAN_POINT ( 'NONE', ( -15.32687855104135900, 15.19460332487162900, -28.70130020486395100 ) ) ; +#48769 = AXIS2_PLACEMENT_3D ( 'NONE', #29651, #54359, #60655 ) ; +#48770 = EDGE_CURVE ( 'NONE', #47662, #32055, #54712, .T. ) ; +#48771 = EDGE_CURVE ( 'NONE', #62964, #44986, #40246, .T. ) ; +#48772 = CARTESIAN_POINT ( 'NONE', ( -9.438065798940481700, 39.11613388835919400, -28.57723500840078000 ) ) ; +#48773 = PLANE ( 'NONE', #28841 ) ; +#48774 = PLANE ( 'NONE', #2582 ) ; +#48775 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 76.13383585008145400, -28.37247596307072000 ) ) ; +#48776 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 18.50000000000002100, -9.258116921287651700 ) ) ; +#48777 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48778 = EDGE_CURVE ( 'NONE', #60591, #36741, #25820, .T. ) ; +#48779 = AXIS2_PLACEMENT_3D ( 'NONE', #60204, #22661, #35190 ) ; +#48780 = CARTESIAN_POINT ( 'NONE', ( 4.283176507098982500, 39.06267502090533100, -28.41043597897454400 ) ) ; +#48781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48782 = ORIENTED_EDGE ( 'NONE', *, *, #48543, .T. ) ; +#48783 = ORIENTED_EDGE ( 'NONE', *, *, #14850, .F. ) ; +#48784 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48786 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#48788 = ORIENTED_EDGE ( 'NONE', *, *, #36084, .F. ) ; +#48787 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655644300, 41.67701665379239300, -28.20555803802997400 ) ) ; +#48789 = AXIS2_PLACEMENT_3D ( 'NONE', #43523, #62335, #19 ) ; +#48790 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507535400, 29.20543520232828200, -28.70555803802994200 ) ) ; +#48791 = AXIS2_PLACEMENT_3D ( 'NONE', #77631, #40365, #3097 ) ; +#48792 = EDGE_CURVE ( 'NONE', #76568, #74615, #11362, .T. ) ; +#48793 = ADVANCED_FACE ( 'NONE', ( #47578 ), #69162, .T. ) ; +#48794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48795 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 50.00000000000002100, -9.205558038030011000 ) ) ; +#48796 = FACE_OUTER_BOUND ( 'NONE', #2012, .T. ) ; +#48797 = EDGE_LOOP ( 'NONE', ( #29139, #10529, #47632, #57103, #13831 ) ) ; +#48798 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 48.91684396980715400, -28.70555803802999200 ) ) ; +#48799 = VERTEX_POINT ( 'NONE', #56935 ) ; +#48800 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 53.00000000000000700, 3.794441961969998300 ) ) ; +#48801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48802 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492445900, 40.89456479767167000, -28.70555803802996700 ) ) ; +#48803 = VERTEX_POINT ( 'NONE', #19680 ) ; +#48804 = FACE_OUTER_BOUND ( 'NONE', #51787, .T. ) ; +#48805 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.43250300240198000, -28.20555803803047800 ) ) ; +#48806 = ORIENTED_EDGE ( 'NONE', *, *, #46944, .T. ) ; +#48807 = ORIENTED_EDGE ( 'NONE', *, *, #3890, .T. ) ; +#48808 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .F. ) ; +#48809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48810 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48811 = EDGE_CURVE ( 'NONE', #63854, #79978, #77654, .T. ) ; +#48812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48813 = ADVANCED_FACE ( 'NONE', ( #1849 ), #74862, .F. ) ; +#48814 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48815 = EDGE_LOOP ( 'NONE', ( #65630, #27429, #47763, #52316, #52939, #49810, #54540, #13834 ) ) ; +#48816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48817 = ORIENTED_EDGE ( 'NONE', *, *, #14256, .F. ) ; +#48818 = AXIS2_PLACEMENT_3D ( 'NONE', #43991, #6765, #50253 ) ; +#48819 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 70.34267608797553400, -28.20555803803047800 ) ) ; +#48820 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#48821 = CIRCLE ( 'NONE', #63522, 10.00000000000009200 ) ; +#48822 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124983600, 55.13282980700520100, -28.53914313452737200 ) ) ; +#48823 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454033300, 62.51973550835640500, -28.70555803803022200 ) ) ; +#48824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70905, #64686, #39634, #33654 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697741709500E-007, 0.0008724363063898888100 ), + .UNSPECIFIED. ) ; +#48826 = VERTEX_POINT ( 'NONE', #50895 ) ; +#48827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#48828 = CONICAL_SURFACE ( 'NONE', #55116, 10.50000000000009600, 0.7853981633974500600 ) ; +#48829 = ORIENTED_EDGE ( 'NONE', *, *, #4353, .F. ) ; +#48830 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 29.02242369685794200, -28.53861367218590300 ) ) ; +#48831 = ADVANCED_FACE ( 'NONE', ( #27184 ), #41737, .T. ) ; +#48832 = EDGE_LOOP ( 'NONE', ( #61684, #38803, #3712, #40870, #50268 ) ) ; +#48833 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174618900, 81.43945992495534400, -28.34042301926885800 ) ) ; +#48834 = AXIS2_PLACEMENT_3D ( 'NONE', #24663, #68168, #30924 ) ; +#48835 = VERTEX_POINT ( 'NONE', #63474 ) ; +#48836 = EDGE_LOOP ( 'NONE', ( #5069, #61076, #55700, #50643, #21149 ) ) ; +#48837 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290089000, 20.53732497909458800, -28.41043597897465400 ) ) ; +#48838 = FACE_OUTER_BOUND ( 'NONE', #4367, .T. ) ; +#48839 = ORIENTED_EDGE ( 'NONE', *, *, #26541, .T. ) ; +#48840 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#48841 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230960500, 30.31139552890385900, -28.53900456328626600 ) ) ; +#48842 = FACE_OUTER_BOUND ( 'NONE', #13979, .T. ) ; +#48843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61999, #18464, #74499, #37198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632881349700E-007, 0.0007800579090280453400 ), + .UNSPECIFIED. ) ; +#48844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48845 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.23237991241950300, -28.26633708900883900 ) ) ; +#48846 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510340700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#48847 = ADVANCED_FACE ( 'NONE', ( #43673 ), #8642, .F. ) ; +#48848 = ORIENTED_EDGE ( 'NONE', *, *, #69770, .T. ) ; +#48849 = AXIS2_PLACEMENT_3D ( 'NONE', #62862, #25597, #69099 ) ; +#48850 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747118300, 9.968680884981161200, -28.51286550264485000 ) ) ; +#48851 = FACE_OUTER_BOUND ( 'NONE', #62357, .T. ) ; +#48852 = ORIENTED_EDGE ( 'NONE', *, *, #43401, .F. ) ; +#48853 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 59.33333333333334300, -10.73183747965883100 ) ) ; +#48854 = ORIENTED_EDGE ( 'NONE', *, *, #39104, .F. ) ; +#48855 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22224, #9983, #59773, #22507 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377689532809300E-007, 0.0007331055842532352600 ), + .UNSPECIFIED. ) ; +#48856 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 24.49999999999999600, 2.454695999814380200 ) ) ; +#48857 = AXIS2_PLACEMENT_3D ( 'NONE', #31597, #75107, #37812 ) ; +#48858 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372540000, 53.66464174796065800, -28.53896444442242200 ) ) ; +#48859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34338, #28102, #46523, #77844 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098185222533228100E-007, 0.0006654852833081736400 ), + .UNSPECIFIED. ) ; +#48860 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 50.90033558196089600, -28.70555803803014400 ) ) ; +#48861 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.41070809551059300, -28.20555803802996700 ) ) ; +#48862 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48864 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 26.83333333333333600, -4.152999154772353500 ) ) ; +#48865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48866 = EDGE_LOOP ( 'NONE', ( #10838, #43945, #57052, #65531 ) ) ; +#48867 = PLANE ( 'NONE', #42295 ) ; +#48868 = ORIENTED_EDGE ( 'NONE', *, *, #51418, .T. ) ; +#48869 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990700, 29.19949493661175700, -28.70555803802994200 ) ) ; +#48870 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 80.34267608797570400, -28.20555803802997700 ) ) ; +#48871 = ORIENTED_EDGE ( 'NONE', *, *, #57624, .T. ) ; +#48872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48873 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 20.86172549728275200, -28.47230003642272300 ) ) ; +#48874 = FACE_OUTER_BOUND ( 'NONE', #60730, .T. ) ; +#48875 = VERTEX_POINT ( 'NONE', #38663 ) ; +#48876 = CIRCLE ( 'NONE', #59207, 10.00000000000009200 ) ; +#48877 = ORIENTED_EDGE ( 'NONE', *, *, #49955, .F. ) ; +#48878 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#48879 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48880 = CIRCLE ( 'NONE', #41835, 10.50000000000009200 ) ; +#48881 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#48882 = EDGE_CURVE ( 'NONE', #57949, #51458, #10630, .T. ) ; +#48883 = ORIENTED_EDGE ( 'NONE', *, *, #21540, .T. ) ; +#48884 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818085700, 81.65075715145329100, -28.20555803803047800 ) ) ; +#48885 = ORIENTED_EDGE ( 'NONE', *, *, #22944, .T. ) ; +#48886 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#48887 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48888 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#48889 = EDGE_LOOP ( 'NONE', ( #80159, #15859, #70130, #2518 ) ) ; +#48890 = CIRCLE ( 'NONE', #51421, 10.00000000000009600 ) ; +#48891 = EDGE_CURVE ( 'NONE', #35392, #40229, #25218, .T. ) ; +#48892 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60389, #16854, #35627, #41852, #4597, #48081, #10870, #54357, #17122, #60652, #23377, #66896, #29649, #73159, #35877, #79408, #42104, #4861, #48358, #11137, #54639, #17388, #60921, #23650, #67159, #29938, #73415, #36157, #79659, #42376, #5134, #48623, #11409, #54898, #17666, #61187, #23926 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1249999999999930900, 0.1874999999999889500, 0.2187499999999876500, 0.2499999999999863400, 0.3749999999999809000, 0.4374999999999771300, 0.4687499999999743500, 0.4843749999999720800, 0.4921874999999704700, 0.4960937499999696900, 0.4999999999999689100, 0.6249999999999912300, 0.6875000000000026600, 0.7187500000000095500, 0.7343750000000118800, 0.7421875000000132100, 0.7460937500000126600, 0.7480468750000123200, 0.7500000000000119900, 0.8750000000000060000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#48893 = ADVANCED_FACE ( 'NONE', ( #45613 ), #23263, .T. ) ; +#48894 = CARTESIAN_POINT ( 'NONE', ( 15.68514033016295400, 14.04999999999976600, -28.35375031073507700 ) ) ; +#48895 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890751700, 49.97143078992716200, -28.37063977681169300 ) ) ; +#48896 = EDGE_CURVE ( 'NONE', #31837, #70940, #63209, .T. ) ; +#48897 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819190700, 51.65075715145310700, -28.20555803802997700 ) ) ; +#48898 = ORIENTED_EDGE ( 'NONE', *, *, #24027, .T. ) ; +#48899 = AXIS2_PLACEMENT_3D ( 'NONE', #77999, #59226, #28267 ) ; +#48900 = CIRCLE ( 'NONE', #55591, 10.00000000000009200 ) ; +#48901 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 30.33333333333333600, -5.205558038030008400 ) ) ; +#48902 = VERTEX_POINT ( 'NONE', #26746 ) ; +#48903 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#48904 = EDGE_LOOP ( 'NONE', ( #38213, #15426, #77638 ) ) ; +#48905 = ORIENTED_EDGE ( 'NONE', *, *, #3969, .F. ) ; +#48906 = FACE_OUTER_BOUND ( 'NONE', #44791, .T. ) ; +#48907 = VERTEX_POINT ( 'NONE', #64015 ) ; +#48908 = CONICAL_SURFACE ( 'NONE', #59107, 10.00000000000009200, 0.7853981633974447300 ) ; +#48909 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492475400, 21.02620220503761000, -28.70555803802994200 ) ) ; +#48910 = ADVANCED_FACE ( 'NONE', ( #39791 ), #70938, .T. ) ; +#48911 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48912 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914530900, 81.82440674572717400, -28.45987523529583300 ) ) ; +#48913 = AXIS2_PLACEMENT_3D ( 'NONE', #44391, #69191, #50664 ) ; +#48914 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#48915 = CARTESIAN_POINT ( 'NONE', ( 7.949130458965044900, 57.15000000000000600, -4.161669246570761000 ) ) ; +#48916 = EDGE_CURVE ( 'NONE', #48534, #69760, #48699, .T. ) ; +#48917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48918 = EDGE_CURVE ( 'NONE', #55473, #29238, #34286, .T. ) ; +#48919 = AXIS2_PLACEMENT_3D ( 'NONE', #25787, #69269, #32026 ) ; +#48920 = ORIENTED_EDGE ( 'NONE', *, *, #2913, .T. ) ; +#48921 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48922 = AXIS2_PLACEMENT_3D ( 'NONE', #64439, #76911, #39647 ) ; +#48923 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455600000, 51.87833896172616500, -28.53892303408255800 ) ) ; +#48924 = FACE_OUTER_BOUND ( 'NONE', #36096, .T. ) ; +#48925 = VERTEX_POINT ( 'NONE', #8193 ) ; +#48926 = ADVANCED_FACE ( 'NONE', ( #6706 ), #37838, .T. ) ; +#48927 = FACE_OUTER_BOUND ( 'NONE', #6708, .T. ) ; +#48928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48929 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48930 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#48931 = EDGE_CURVE ( 'NONE', #32526, #31065, #54394, .T. ) ; +#48932 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48933 = AXIS2_PLACEMENT_3D ( 'NONE', #59242, #21987, #65537 ) ; +#48934 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #75179, #6896 ) ; +#48935 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77099, #76548, #2540, #46057 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478989827842000E-007, 0.0002930330874876893500 ), + .UNSPECIFIED. ) ; +#48936 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215565900, 55.79999999999925800, -28.20555803803047800 ) ) ; +#48937 = ADVANCED_FACE ( 'NONE', ( #29176 ), #68995, .T. ) ; +#48938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48939 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24923, #6671, #25469, #68962 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635064131900E-007, 0.0008082706238602487600 ), + .UNSPECIFIED. ) ; +#48940 = AXIS2_PLACEMENT_3D ( 'NONE', #80266, #36739, #67769 ) ; +#48941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48942 = ORIENTED_EDGE ( 'NONE', *, *, #72321, .F. ) ; +#48943 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, -1.166666666666665400, -6.205558038030004800 ) ) ; +#48944 = ORIENTED_EDGE ( 'NONE', *, *, #78953, .F. ) ; +#48945 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 39.00000000000000700, -9.205558038030005700 ) ) ; +#48946 = FACE_OUTER_BOUND ( 'NONE', #74662, .T. ) ; +#48947 = AXIS2_PLACEMENT_3D ( 'NONE', #29, #25072, #56061 ) ; +#48948 = EDGE_LOOP ( 'NONE', ( #18712, #24715, #67074 ) ) ; +#48949 = FACE_OUTER_BOUND ( 'NONE', #69279, .T. ) ; +#48950 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#48951 = EDGE_LOOP ( 'NONE', ( #19688, #24247, #18229 ) ) ; +#48952 = ORIENTED_EDGE ( 'NONE', *, *, #49072, .T. ) ; +#48953 = CONICAL_SURFACE ( 'NONE', #13166, 10.50000000000009600, 0.7853981633974518300 ) ; +#48954 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 4.166666666666689200, 6.794441961969992500 ) ) ; +#48955 = ORIENTED_EDGE ( 'NONE', *, *, #62155, .F. ) ; +#48956 = EDGE_LOOP ( 'NONE', ( #26939, #44915, #54702 ) ) ; +#48957 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#48958 = AXIS2_PLACEMENT_3D ( 'NONE', #41856, #4605, #48087 ) ; +#48959 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 71.52858243452104100, -28.70555803802997700 ) ) ; +#48960 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#48961 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 60.36203212531316400, -28.38801640354855500 ) ) ; +#48962 = EDGE_CURVE ( 'NONE', #79769, #33779, #21326, .T. ) ; +#48963 = CIRCLE ( 'NONE', #28503, 10.00000000000009200 ) ; +#48964 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041600, 88.17143691309399900, -28.36981695106829800 ) ) ; +#48965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48966 = ORIENTED_EDGE ( 'NONE', *, *, #49291, .F. ) ; +#48967 = FACE_OUTER_BOUND ( 'NONE', #38302, .T. ) ; +#48968 = AXIS2_PLACEMENT_3D ( 'NONE', #79501, #73244, #4951 ) ; +#48969 = EDGE_LOOP ( 'NONE', ( #75137, #36701, #72451, #38810 ) ) ; +#48970 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621800, 50.33106028708540700, -28.57333386111662300 ) ) ; +#48971 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48972 = VERTEX_POINT ( 'NONE', #2483 ) ; +#48973 = PLANE ( 'NONE', #61748 ) ; +#48974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48975 = ORIENTED_EDGE ( 'NONE', *, *, #12668, .T. ) ; +#48976 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 51.22294471194859300, -28.20555803803047800 ) ) ; +#48977 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 60.69966441803886400, -28.70555803803014400 ) ) ; +#48978 = EDGE_LOOP ( 'NONE', ( #29182, #42830, #37545, #34094 ) ) ; +#48979 = CARTESIAN_POINT ( 'NONE', ( 18.01268492844084800, 49.80637265398669200, -28.24165217761327900 ) ) ; +#48980 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#48981 = CONICAL_SURFACE ( 'NONE', #67933, 10.50000000000009600, 0.7853981633974518300 ) ; +#48982 = CARTESIAN_POINT ( 'NONE', ( -10.24297557446558200, 80.16517473503391500, -28.29551658696701500 ) ) ; +#48983 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#48984 = VERTEX_POINT ( 'NONE', #45992 ) ; +#48985 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48986 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59755, #72005, #28787, #72274 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397469000, 0.001517194977238240300 ), + .UNSPECIFIED. ) ; +#48987 = VERTEX_POINT ( 'NONE', #70767 ) ; +#48988 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#48989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48990 = EDGE_CURVE ( 'NONE', #63399, #67964, #19821, .T. ) ; +#48991 = ORIENTED_EDGE ( 'NONE', *, *, #75365, .F. ) ; +#48992 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 89.60439022488283500, -28.70555803803047500 ) ) ; +#48993 = CONICAL_SURFACE ( 'NONE', #23711, 10.00000000000009200, 0.7853981633974447300 ) ; +#48994 = EDGE_CURVE ( 'NONE', #44206, #64791, #58297, .T. ) ; +#48995 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596400, 53.65857157145701700, -28.37229765499279600 ) ) ; +#48996 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 54.37738371066727400, -28.70555803802997700 ) ) ; +#48997 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 61.43650294695079600, -28.30782889147504700 ) ) ; +#48998 = PLANE ( 'NONE', #73748 ) ; +#48999 = EDGE_CURVE ( 'NONE', #15261, #12801, #5359, .T. ) ; +#49000 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784450500, 75.47903320442293300, -28.36604143581859100 ) ) ; +#49001 = EDGE_CURVE ( 'NONE', #6766, #13589, #71684, .T. ) ; +#49002 = AXIS2_PLACEMENT_3D ( 'NONE', #47871, #10653, #54137 ) ; +#49003 = FACE_OUTER_BOUND ( 'NONE', #38724, .T. ) ; +#49004 = ADVANCED_FACE ( 'NONE', ( #56340 ), #2778, .T. ) ; +#49005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49006 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14802, #39551, #2267, #58324 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001871986839426186300 ), + .UNSPECIFIED. ) ; +#49007 = VERTEX_POINT ( 'NONE', #52797 ) ; +#49008 = ADVANCED_FACE ( 'NONE', ( #67052 ), #50451, .F. ) ; +#49009 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 45.00000000000001400, -1.205558038030005300 ) ) ; +#49010 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823699600, 21.40456253568400800, -28.61277292027076100 ) ) ; +#49011 = AXIS2_PLACEMENT_3D ( 'NONE', #80563, #62080, #55533 ) ; +#49013 = VERTEX_POINT ( 'NONE', #77837 ) ; +#49012 = EDGE_CURVE ( 'NONE', #35712, #5847, #76787, .T. ) ; +#49014 = CARTESIAN_POINT ( 'NONE', ( 17.24297557446588100, 70.16517473503343200, -28.29551658696740900 ) ) ; +#49015 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432837500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#49016 = EDGE_CURVE ( 'NONE', #10125, #69885, #57205, .T. ) ; +#49017 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 30.96868088498122200, -28.51286550264512000 ) ) ; +#49018 = EDGE_CURVE ( 'NONE', #39773, #19205, #19353, .T. ) ; +#49019 = ORIENTED_EDGE ( 'NONE', *, *, #47564, .F. ) ; +#49020 = ADVANCED_FACE ( 'NONE', ( #52414 ), #65121, .T. ) ; +#49021 = FACE_OUTER_BOUND ( 'NONE', #20448, .T. ) ; +#49022 = VERTEX_POINT ( 'NONE', #9841 ) ; +#49023 = CONICAL_SURFACE ( 'NONE', #35185, 10.00000000000009200, 0.7853981633974447300 ) ; +#49024 = ORIENTED_EDGE ( 'NONE', *, *, #74085, .T. ) ; +#49025 = AXIS2_PLACEMENT_3D ( 'NONE', #20473, #64005, #26740 ) ; +#49026 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819343900, 59.94924284854693000, -28.20555803802997700 ) ) ; +#49027 = FACE_OUTER_BOUND ( 'NONE', #21088, .T. ) ; +#49028 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58047, #64601, #15069, #58574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572445753200E-007, 0.0004669842289003353600 ), + .UNSPECIFIED. ) ; +#49029 = FACE_OUTER_BOUND ( 'NONE', #11734, .T. ) ; +#49030 = VERTEX_POINT ( 'NONE', #16100 ) ; +#49031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49032 = ORIENTED_EDGE ( 'NONE', *, *, #49725, .F. ) ; +#49033 = EDGE_CURVE ( 'NONE', #5676, #46138, #42724, .T. ) ; +#49034 = VERTEX_POINT ( 'NONE', #47063 ) ; +#49035 = AXIS2_PLACEMENT_3D ( 'NONE', #64638, #52059, #33601 ) ; +#49036 = AXIS2_PLACEMENT_3D ( 'NONE', #39663, #45884, #76924 ) ; +#49037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49038 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49039 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499884300, 69.83662311806175200, -28.37223523914901300 ) ) ; +#49040 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 16.33333333333333600, 4.294441961970000500 ) ) ; +#49041 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#49042 = FACE_OUTER_BOUND ( 'NONE', #33483, .T. ) ; +#49043 = ORIENTED_EDGE ( 'NONE', *, *, #13793, .F. ) ; +#49044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#49045 = CONICAL_SURFACE ( 'NONE', #39881, 10.00000000000009200, 0.7853981633974447300 ) ; +#49046 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252816500, 49.63131911501876200, -28.51286550264511300 ) ) ; +#49047 = ORIENTED_EDGE ( 'NONE', *, *, #51538, .T. ) ; +#49048 = ORIENTED_EDGE ( 'NONE', *, *, #32006, .F. ) ; +#49049 = VERTEX_POINT ( 'NONE', #34870 ) ; +#49050 = ORIENTED_EDGE ( 'NONE', *, *, #77864, .T. ) ; +#49051 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477733700, 41.21410430764721200, -28.27354076558355800 ) ) ; +#49052 = PLANE ( 'NONE', #65942 ) ; +#49053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49054 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825243000, 90.16054007504463600, -28.34042301926880800 ) ) ; +#49055 = ORIENTED_EDGE ( 'NONE', *, *, #45923, .F. ) ; +#49056 = FACE_OUTER_BOUND ( 'NONE', #54949, .T. ) ; +#49057 = AXIS2_PLACEMENT_3D ( 'NONE', #76268, #38985, #1732 ) ; +#49058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49059 = ORIENTED_EDGE ( 'NONE', *, *, #66461, .F. ) ; +#49060 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42197, #54728, #73512, #36244 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750936400, 0.0007596411030283052100 ), + .UNSPECIFIED. ) ; +#49061 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 70.90033558196107300, -28.70555803802997700 ) ) ; +#49062 = ORIENTED_EDGE ( 'NONE', *, *, #75009, .F. ) ; +#49063 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448972200, 47.83333333333332900, 6.794441961970000500 ) ) ; +#49064 = ORIENTED_EDGE ( 'NONE', *, *, #55217, .T. ) ; +#49065 = AXIS2_PLACEMENT_3D ( 'NONE', #12772, #6485, #18987 ) ; +#49066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49068 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 50.83333333333335000, -6.205558038030004800 ) ) ; +#49069 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#49070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49071 = VERTEX_POINT ( 'NONE', #3834 ) ; +#49072 = EDGE_CURVE ( 'NONE', #16869, #14016, #28340, .T. ) ; +#49073 = LINE ( 'NONE', #17717, #19934 ) ; +#49074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49075 = AXIS2_PLACEMENT_3D ( 'NONE', #45539, #2042, #8298 ) ; +#49076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49077 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567157600, 28.85339758437810400, -28.20555803802994200 ) ) ; +#49078 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655646000, 31.17701665379238200, -28.20555803802996000 ) ) ; +#49079 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 60.16349705304866500, -28.30782889147482400 ) ) ; +#49080 = AXIS2_PLACEMENT_3D ( 'NONE', #72712, #35458, #78972 ) ; +#49081 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547400, 70.16054007504448000, -28.34042301926906000 ) ) ; +#49082 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965577100, 10.17701665379167200, -28.20555803803009500 ) ) ; +#49083 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174864400, 90.16054007504448000, -28.34042301926892500 ) ) ; +#49084 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877856300, 39.57332680091207100, -28.37233769390155700 ) ) ; +#49085 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 20.52858243452105900, -28.70555803802995200 ) ) ; +#49086 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566730400, 35.04999999999997600, -28.70555803802995200 ) ) ; +#49087 = AXIS2_PLACEMENT_3D ( 'NONE', #66906, #29660, #73172 ) ; +#49088 = CONICAL_SURFACE ( 'NONE', #66867, 10.50000000000009600, 0.7853981633974500600 ) ; +#49089 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 43.65857157145701700, -28.37229765499282100 ) ) ; +#49090 = PLANE ( 'NONE', #39015 ) ; +#49091 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561500, 55.79999999999999000, -28.70525300642875200 ) ) ; +#49092 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49093 = ORIENTED_EDGE ( 'NONE', *, *, #17256, .F. ) ; +#49094 = CARTESIAN_POINT ( 'NONE', ( -17.22125914545564700, 39.16476764525110400, -28.30311733712047200 ) ) ; +#49095 = FACE_OUTER_BOUND ( 'NONE', #50361, .T. ) ; +#49096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49098 = EDGE_LOOP ( 'NONE', ( #54930, #25055, #73541, #18721, #11227 ) ) ; +#49097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49100 = ADVANCED_FACE ( 'NONE', ( #845 ), #32004, .F. ) ; +#49101 = CIRCLE ( 'NONE', #21899, 10.50000000000009600 ) ; +#49102 = FACE_OUTER_BOUND ( 'NONE', #30760, .T. ) ; +#49104 = EDGE_CURVE ( 'NONE', #69853, #46732, #13848, .T. ) ; +#49103 = EDGE_LOOP ( 'NONE', ( #79534, #68228, #57668 ) ) ; +#49105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49106 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 57.16666666666667100, 9.794441961969994300 ) ) ; +#49107 = EDGE_CURVE ( 'NONE', #71478, #25026, #35912, .T. ) ; +#49108 = ORIENTED_EDGE ( 'NONE', *, *, #77732, .F. ) ; +#49109 = CONICAL_SURFACE ( 'NONE', #57333, 10.50000000000009200, 0.7853981633974482800 ) ; +#49110 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21811, #15549, #77821, #40548 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966677400, 0.0007670610367940253800 ), + .UNSPECIFIED. ) ; +#49111 = EDGE_LOOP ( 'NONE', ( #42071, #70579, #12246, #50077, #73684, #60283, #55076, #18884 ) ) ; +#49112 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818086000, 71.65075715145327700, -28.20555803803047800 ) ) ; +#49113 = ORIENTED_EDGE ( 'NONE', *, *, #42946, .F. ) ; +#49114 = ADVANCED_FACE ( 'NONE', ( #4749 ), #63166, .F. ) ; +#49115 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 22.33333333333334600, -5.535685056952199400 ) ) ; +#49116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49117 = EDGE_CURVE ( 'NONE', #46457, #50920, #79693, .T. ) ; +#49118 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49119 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#49120 = CONICAL_SURFACE ( 'NONE', #41914, 10.00000000000009600, 0.7853981633974447300 ) ; +#49121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49122 = VERTEX_POINT ( 'NONE', #41633 ) ; +#49123 = EDGE_CURVE ( 'NONE', #26948, #6862, #80146, .T. ) ; +#49124 = LINE ( 'NONE', #9373, #65726 ) ; +#49125 = EDGE_CURVE ( 'NONE', #56550, #24257, #65701, .T. ) ; +#49126 = VERTEX_POINT ( 'NONE', #16906 ) ; +#49127 = VERTEX_POINT ( 'NONE', #29452 ) ; +#49128 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 24.66666666666668900, 4.294441961969993400 ) ) ; +#49129 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 70.34267608797603100, -28.20555803802997700 ) ) ; +#49130 = ORIENTED_EDGE ( 'NONE', *, *, #44038, .F. ) ; +#49131 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362722800, 77.56528145730217700, -28.66119098264625700 ) ) ; +#49132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49133 = ORIENTED_EDGE ( 'NONE', *, *, #15927, .F. ) ; +#49134 = CIRCLE ( 'NONE', #64137, 10.50000000000009600 ) ; +#49135 = VERTEX_POINT ( 'NONE', #54417 ) ; +#49136 = AXIS2_PLACEMENT_3D ( 'NONE', #79243, #66733, #48179 ) ; +#49137 = ORIENTED_EDGE ( 'NONE', *, *, #62385, .F. ) ; +#49138 = EDGE_CURVE ( 'NONE', #22567, #64449, #15467, .T. ) ; +#49139 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#49140 = EDGE_CURVE ( 'NONE', #75947, #79130, #51159, .T. ) ; +#49141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49142 = EDGE_CURVE ( 'NONE', #77938, #17159, #36743, .T. ) ; +#49143 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123096400, 19.81139552890384800, -28.53900456328625900 ) ) ; +#49144 = ADVANCED_FACE ( 'NONE', ( #72919 ), #77731, .T. ) ; +#49145 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300911400, 88.40378923506904100, -28.61864990621732100 ) ) ; +#49146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49147 = ORIENTED_EDGE ( 'NONE', *, *, #40325, .F. ) ; +#49148 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973405200, 67.33501542110256800, -28.70555803803001600 ) ) ; +#49149 = ORIENTED_EDGE ( 'NONE', *, *, #20007, .T. ) ; +#49150 = FACE_OUTER_BOUND ( 'NONE', #37499, .T. ) ; +#49151 = AXIS2_PLACEMENT_3D ( 'NONE', #77366, #40086, #2813 ) ; +#49152 = ORIENTED_EDGE ( 'NONE', *, *, #56743, .T. ) ; +#49153 = CONICAL_SURFACE ( 'NONE', #32975, 10.50000000000009600, 0.7853981633974500600 ) ; +#49154 = CARTESIAN_POINT ( 'NONE', ( 8.899882735204322200, 14.05000000000000800, -28.53808257741930300 ) ) ; +#49155 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49157 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823716300, 10.90456253568389200, -28.61277292027073600 ) ) ; +#49158 = AXIS2_PLACEMENT_3D ( 'NONE', #42702, #5470, #79999 ) ; +#49159 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#49160 = AXIS2_PLACEMENT_3D ( 'NONE', #20296, #39022, #1768 ) ; +#49161 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567158500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#49162 = AXIS2_PLACEMENT_3D ( 'NONE', #76115, #38835, #1584 ) ; +#49163 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72317, #72038, #41264, #4008 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143690933400E-007, 0.0004559721418117034000 ), + .UNSPECIFIED. ) ; +#49164 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.66749699759768400, -28.20555803802994200 ) ) ; +#49165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49166 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49167 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 28.16666666666668600, 0.9380355014189834000 ) ) ; +#49168 = CONICAL_SURFACE ( 'NONE', #42287, 10.00000000000009600, 0.7853981633974447300 ) ; +#49169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49170 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999994000, 77.70389005397359500, -28.37519436813219200 ) ) ; +#49171 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1387, #38629, #70965, #33705 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764793994307600E-007, 0.0009376791149930025000 ), + .UNSPECIFIED. ) ; +#49172 = VERTEX_POINT ( 'NONE', #23708 ) ; +#49173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25118, #62382, #74891, #37593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004737422600E-007, 0.0004089065559708699300 ), + .UNSPECIFIED. ) ; +#49174 = VERTEX_POINT ( 'NONE', #67212 ) ; +#49175 = CONICAL_SURFACE ( 'NONE', #1444, 10.00000000000009200, 0.7853981633974447300 ) ; +#49176 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035082700, 90.23507838941434000, -28.27580420063968000 ) ) ; +#49177 = AXIS2_PLACEMENT_3D ( 'NONE', #74050, #36755, #80290 ) ; +#49178 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49179 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656716300, 28.85339758437810400, -28.20555803802994200 ) ) ; +#49180 = ORIENTED_EDGE ( 'NONE', *, *, #29379, .F. ) ; +#49181 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#49182 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61028, #11518, #17770, #61304 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735926810700E-007, 0.0006896863566006636100 ), + .UNSPECIFIED. ) ; +#49183 = CIRCLE ( 'NONE', #14039, 10.00000000000009600 ) ; +#49184 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747186300, 41.46868088498121800, -28.51286550264512700 ) ) ; +#49185 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.03751622186544900, -28.32723995587590300 ) ) ; +#49186 = CONICAL_SURFACE ( 'NONE', #23613, 10.00000000000009200, 0.7853981633974447300 ) ; +#49187 = ORIENTED_EDGE ( 'NONE', *, *, #12136, .T. ) ; +#49188 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 51.99560977511615800, -28.70555803803030800 ) ) ; +#49189 = EDGE_CURVE ( 'NONE', #41849, #62599, #17416, .T. ) ; +#49190 = FACE_OUTER_BOUND ( 'NONE', #64584, .T. ) ; +#49191 = AXIS2_PLACEMENT_3D ( 'NONE', #23393, #67449, #23677 ) ; +#49192 = ORIENTED_EDGE ( 'NONE', *, *, #31087, .F. ) ; +#49193 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 57.94142842854307000, -28.20555803802997700 ) ) ; +#49194 = ORIENTED_EDGE ( 'NONE', *, *, #56414, .F. ) ; +#49195 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536600, 81.82440674572818300, -28.45987523529581900 ) ) ; +#49196 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 49.42298334620755900, -28.20555803802996700 ) ) ; +#49197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49198 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#49199 = CONICAL_SURFACE ( 'NONE', #29565, 10.00000000000009400, 0.7853981633974447300 ) ; +#49200 = ADVANCED_FACE ( 'NONE', ( #46549 ), #48670, .T. ) ; +#49201 = CIRCLE ( 'NONE', #59075, 10.00000000000009200 ) ; +#49202 = ORIENTED_EDGE ( 'NONE', *, *, #9720, .F. ) ; +#49203 = AXIS2_PLACEMENT_3D ( 'NONE', #61369, #11578, #67592 ) ; +#49204 = ORIENTED_EDGE ( 'NONE', *, *, #46123, .F. ) ; +#49205 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#49206 = ORIENTED_EDGE ( 'NONE', *, *, #61325, .T. ) ; +#49207 = VERTEX_POINT ( 'NONE', #36449 ) ; +#49208 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45640, #8390, #51894, #14686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438814904700E-007, 0.0007763347809200166400 ), + .UNSPECIFIED. ) ; +#49209 = FACE_OUTER_BOUND ( 'NONE', #22020, .T. ) ; +#49210 = ADVANCED_FACE ( 'NONE', ( #48505 ), #11573, .T. ) ; +#49211 = CONICAL_SURFACE ( 'NONE', #43697, 10.00000000000009600, 0.7853981633974447300 ) ; +#49212 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, -3.333333333333323300, 3.124568980892192800 ) ) ; +#49213 = VERTEX_POINT ( 'NONE', #42694 ) ; +#49214 = AXIS2_PLACEMENT_3D ( 'NONE', #42439, #5197, #48686 ) ; +#49215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49216 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78885, #72617, #29133, #4323, #47808, #10589, #54090, #16843, #60380, #23107, #66617, #29395, #72873, #35618, #79133, #41844, #4586, #48075, #10858, #54349, #17113, #60640, #23372, #66885, #29642, #73148, #35870, #79401, #42092, #4854, #48347, #11129, #54628, #17378, #60913, #23637, #67150, #29929, #73411, #36146 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1249999999999758500, 0.1874999999999637200, 0.2187499999999572000, 0.2343749999999540600, 0.2499999999999509300, 0.3749999999999274500, 0.4374999999999155700, 0.4687499999999096800, 0.4843749999999066300, 0.4921874999999053500, 0.4960937499999052400, 0.4999999999999050800, 0.6249999999999187300, 0.6874999999999251700, 0.7187499999999282800, 0.7343749999999293900, 0.7421874999999298300, 0.7460937499999303900, 0.7480468749999308300, 0.7490234374999311700, 0.7499999999999313900, 0.8749999999999656900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#49217 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 36.83333333333335000, 6.794441961969992500 ) ) ; +#49218 = CIRCLE ( 'NONE', #33109, 10.50000000000009600 ) ; +#49220 = ORIENTED_EDGE ( 'NONE', *, *, #13695, .T. ) ; +#49219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49221 = PLANE ( 'NONE', #75064 ) ; +#49222 = EDGE_CURVE ( 'NONE', #31168, #17421, #28137, .T. ) ; +#49223 = ADVANCED_FACE ( 'NONE', ( #44587 ), #5458, .T. ) ; +#49224 = ORIENTED_EDGE ( 'NONE', *, *, #42235, .F. ) ; +#49225 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49226 = ADVANCED_FACE ( 'NONE', ( #61222 ), #26173, .T. ) ; +#49227 = FACE_OUTER_BOUND ( 'NONE', #32875, .T. ) ; +#49228 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 2.000000000000015500, -9.205558038030005700 ) ) ; +#49229 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49230 = ORIENTED_EDGE ( 'NONE', *, *, #16360, .T. ) ; +#49231 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548998800, 18.15930907398571700, -28.35186440610893000 ) ) ; +#49232 = ADVANCED_FACE ( 'NONE', ( #33954 ), #73852, .T. ) ; +#49233 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#49234 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#49235 = EDGE_CURVE ( 'NONE', #60445, #37317, #22301, .T. ) ; +#49236 = EDGE_CURVE ( 'NONE', #70364, #146, #59238, .T. ) ; +#49237 = FACE_OUTER_BOUND ( 'NONE', #46159, .T. ) ; +#49238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49239 = VERTEX_POINT ( 'NONE', #5995 ) ; +#49240 = CARTESIAN_POINT ( 'NONE', ( 17.30183166260285800, 79.84162552338044300, -28.43755849160219600 ) ) ; +#49241 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 34.73212903577625400, -28.37244029424742200 ) ) ; +#49242 = CIRCLE ( 'NONE', #1397, 10.00000000000009200 ) ; +#49243 = CARTESIAN_POINT ( 'NONE', ( -17.03295546792554300, 78.40241253122521000, -28.49829281932970600 ) ) ; +#49244 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#49245 = ORIENTED_EDGE ( 'NONE', *, *, #35297, .F. ) ; +#49247 = ORIENTED_EDGE ( 'NONE', *, *, #55620, .T. ) ; +#49246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49248 = CONICAL_SURFACE ( 'NONE', #57702, 10.50000000000009600, 0.7853981633974500600 ) ; +#49249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49250 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346205600, 51.39409401757593800, -28.39369363572405200 ) ) ; +#49251 = AXIS2_PLACEMENT_3D ( 'NONE', #15340, #58844, #21608 ) ; +#49252 = EDGE_CURVE ( 'NONE', #35408, #35438, #30091, .T. ) ; +#49253 = EDGE_CURVE ( 'NONE', #12775, #53919, #13528, .T. ) ; +#49254 = ORIENTED_EDGE ( 'NONE', *, *, #54648, .T. ) ; +#49255 = EDGE_CURVE ( 'NONE', #72943, #9849, #9593, .T. ) ; +#49256 = CARTESIAN_POINT ( 'NONE', ( -10.77884208558769800, 30.93523632220587800, -28.30315276798565800 ) ) ; +#49257 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 79.77559325427182600, -28.45987523529581900 ) ) ; +#49258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49259 = EDGE_CURVE ( 'NONE', #51449, #53446, #7816, .T. ) ; +#49260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49261 = CONICAL_SURFACE ( 'NONE', #61952, 10.50000000000009600, 0.7853981633974500600 ) ; +#49262 = AXIS2_PLACEMENT_3D ( 'NONE', #25549, #75298, #50493 ) ; +#49263 = CONICAL_SURFACE ( 'NONE', #71503, 10.50000000000009600, 0.7853981633974518300 ) ; +#49264 = ORIENTED_EDGE ( 'NONE', *, *, #72457, .T. ) ; +#49265 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769027100, 19.81139552890386900, -28.53900456328624800 ) ) ; +#49266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49268 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 79.60439022488336000, -28.70555803802997700 ) ) ; +#49269 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124969100, 75.13282980700492400, -28.53914313452760300 ) ) ; +#49270 = VERTEX_POINT ( 'NONE', #43751 ) ; +#49271 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#49272 = ORIENTED_EDGE ( 'NONE', *, *, #27020, .T. ) ; +#49273 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338502400, 31.10677350908861900, -28.30799595738890800 ) ) ; +#49274 = AXIS2_PLACEMENT_3D ( 'NONE', #19504, #39901, #2609 ) ; +#49275 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818910400, 59.94924284854708700, -28.20555803802997700 ) ) ; +#49276 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#49277 = AXIS2_PLACEMENT_3D ( 'NONE', #50436, #50181, #19485 ) ; +#49278 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 30.56914835874665600, -28.45573375118225500 ) ) ; +#49279 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11871, #24115, #36852, #80406 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283326655300, 0.0007287255810274895200 ), + .UNSPECIFIED. ) ; +#49280 = CIRCLE ( 'NONE', #9509, 9.500000000000097700 ) ; +#49281 = ORIENTED_EDGE ( 'NONE', *, *, #67461, .F. ) ; +#49282 = ORIENTED_EDGE ( 'NONE', *, *, #80021, .F. ) ; +#49283 = VERTEX_POINT ( 'NONE', #24762 ) ; +#49284 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49285 = VERTEX_POINT ( 'NONE', #50005 ) ; +#49286 = FACE_OUTER_BOUND ( 'NONE', #47868, .T. ) ; +#49287 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 42.83333333333334300, -3.349151577478984600 ) ) ; +#49288 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49289 = AXIS2_PLACEMENT_3D ( 'NONE', #35634, #79153, #41859 ) ; +#49290 = EDGE_LOOP ( 'NONE', ( #75779, #54069, #68622, #56106 ) ) ; +#49291 = EDGE_CURVE ( 'NONE', #76395, #73569, #74190, .T. ) ; +#49292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22899, #72157, #29200, #72687 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386348939100, 0.0008131256040089561800 ), + .UNSPECIFIED. ) ; +#49293 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#49294 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 90.16349705304865800, -28.30782889147482400 ) ) ; +#49295 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868699800, 61.58005252438362500, -28.24986299608883300 ) ) ; +#49296 = ADVANCED_FACE ( 'NONE', ( #40736 ), #55318, .F. ) ; +#49297 = FACE_OUTER_BOUND ( 'NONE', #52800, .T. ) ; +#49298 = EDGE_CURVE ( 'NONE', #38936, #75321, #59715, .T. ) ; +#49299 = ORIENTED_EDGE ( 'NONE', *, *, #28802, .T. ) ; +#49300 = FACE_OUTER_BOUND ( 'NONE', #34270, .T. ) ; +#49301 = AXIS2_PLACEMENT_3D ( 'NONE', #78345, #41067, #3788 ) ; +#49302 = CARTESIAN_POINT ( 'NONE', ( 1.038367061114153900E-014, 57.14999999999999900, -18.70555803802999900 ) ) ; +#49303 = CIRCLE ( 'NONE', #613, 10.50000000000009600 ) ; +#49304 = ADVANCED_FACE ( 'NONE', ( #42673 ), #22253, .T. ) ; +#49305 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.46616414991842700, -28.37247596307075500 ) ) ; +#49306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77918, #34393, #65688, #28451 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940577012600 ), + .UNSPECIFIED. ) ; +#49308 = EDGE_LOOP ( 'NONE', ( #77170, #53105, #31477 ) ) ; +#49307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49311 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 14.16666666666666600, -4.152999154772358800 ) ) ; +#49312 = AXIS2_PLACEMENT_3D ( 'NONE', #35028, #78550, #41243 ) ; +#49313 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844492100, 55.46616414991842000, -28.37247596307075900 ) ) ; +#49314 = FACE_OUTER_BOUND ( 'NONE', #35606, .T. ) ; +#49315 = ORIENTED_EDGE ( 'NONE', *, *, #67083, .F. ) ; +#49316 = ADVANCED_FACE ( 'NONE', ( #7627 ), #69921, .T. ) ; +#49317 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#49318 = ORIENTED_EDGE ( 'NONE', *, *, #54139, .T. ) ; +#49319 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49320 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 49.42298334620755900, -28.20555803802996700 ) ) ; +#49321 = ORIENTED_EDGE ( 'NONE', *, *, #52510, .T. ) ; +#49322 = CONICAL_SURFACE ( 'NONE', #49799, 10.50000000000009600, 0.7853981633974500600 ) ; +#49323 = AXIS2_PLACEMENT_3D ( 'NONE', #4241, #72799, #29326 ) ; +#49324 = ORIENTED_EDGE ( 'NONE', *, *, #24887, .T. ) ; +#49325 = ADVANCED_FACE ( 'NONE', ( #71903 ), #36823, .F. ) ; +#49326 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 81.43945992495534400, -28.34042301926880800 ) ) ; +#49327 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000008000, 45.66666666666667900, -8.133761268305514500 ) ) ; +#49328 = CARTESIAN_POINT ( 'NONE', ( 1.466819876342333200, 55.79999999999999000, -28.37307693585060500 ) ) ; +#49329 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#49330 = EDGE_CURVE ( 'NONE', #4991, #18097, #45174, .T. ) ; +#49331 = FACE_OUTER_BOUND ( 'NONE', #57074, .T. ) ; +#49332 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 48.66666666666667100, 3.124568980892192800 ) ) ; +#49333 = VERTEX_POINT ( 'NONE', #56836 ) ; +#49334 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188355600, 9.894351187922355400, -28.41114655922298500 ) ) ; +#49335 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074374100, 31.78032162676581900, -28.55467576046956400 ) ) ; +#49336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49337 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49338 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 70.16749699759769500, -28.20555803802997700 ) ) ; +#49339 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466700800, 20.79130857014967000, -28.37223374938520900 ) ) ; +#49340 = EDGE_LOOP ( 'NONE', ( #12263, #43157, #56575 ) ) ; +#49341 = ADVANCED_FACE ( 'NONE', ( #24214 ), #3732, .T. ) ; +#49342 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 81.25732391202386400, -28.20555803803014400 ) ) ; +#49343 = CARTESIAN_POINT ( 'NONE', ( -15.41232936306072800, 31.39604671417949800, -28.70555803803002000 ) ) ; +#49344 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#49345 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 20.78933626866497200, -28.53923937255170200 ) ) ; +#49346 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#49347 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71180, #33915, #15423, #58930 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052722011900E-007, 0.0003301033223275641600 ), + .UNSPECIFIED. ) ; +#49348 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484970800, 62.31032580520965100, -28.59353418718926000 ) ) ; +#49349 = CIRCLE ( 'NONE', #65661, 9.500000000000097700 ) ; +#49350 = FACE_OUTER_BOUND ( 'NONE', #8021, .T. ) ; +#49351 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#49353 = EDGE_CURVE ( 'NONE', #5932, #60447, #30789, .T. ) ; +#49352 = ORIENTED_EDGE ( 'NONE', *, *, #73730, .T. ) ; +#49354 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#49355 = ORIENTED_EDGE ( 'NONE', *, *, #71676, .F. ) ; +#49356 = ORIENTED_EDGE ( 'NONE', *, *, #72163, .T. ) ; +#49357 = EDGE_CURVE ( 'NONE', #25969, #21775, #16330, .T. ) ; +#49358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49359 = EDGE_LOOP ( 'NONE', ( #43295, #39862, #45619, #9764, #70662, #50603 ) ) ; +#49360 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#49361 = CARTESIAN_POINT ( 'NONE', ( 16.66295796991308400, 8.407800092318119300, -28.56619269386661800 ) ) ; +#49362 = CARTESIAN_POINT ( 'NONE', ( -17.36059854261446100, 39.16749699759768800, -28.25434854811489100 ) ) ; +#49363 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180860400, 81.65075715145344800, -28.20555803803030800 ) ) ; +#49364 = ORIENTED_EDGE ( 'NONE', *, *, #8172, .T. ) ; +#49365 = EDGE_CURVE ( 'NONE', #3605, #63908, #75776, .T. ) ; +#49366 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944366300, 38.80044153222985400, -28.38339015421985000 ) ) ; +#49367 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49368 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49369 = EDGE_CURVE ( 'NONE', #35911, #70927, #20301, .T. ) ; +#49370 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37885, #44113, #62950, #25690 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104965469600, 0.0007670610367943082500 ), + .UNSPECIFIED. ) ; +#49371 = FACE_OUTER_BOUND ( 'NONE', #42255, .T. ) ; +#49372 = AXIS2_PLACEMENT_3D ( 'NONE', #23203, #66731, #29498 ) ; +#49373 = ORIENTED_EDGE ( 'NONE', *, *, #7557, .F. ) ; +#49374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49375 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 55.00000000000000000, -12.20555803803000200 ) ) ; +#49376 = EDGE_LOOP ( 'NONE', ( #40917, #60169, #60501 ) ) ; +#49377 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153686800, 60.79999999999998300, -28.55171188418376400 ) ) ; +#49378 = FACE_OUTER_BOUND ( 'NONE', #55500, .T. ) ; +#49379 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 20.16666666666667500, 3.794441961969996900 ) ) ; +#49380 = AXIS2_PLACEMENT_3D ( 'NONE', #54816, #42300, #23847 ) ; +#49381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69123, #63164, #69387, #32135 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695385387936000E-007, 0.0007987676590761128400 ), + .UNSPECIFIED. ) ; +#49383 = ORIENTED_EDGE ( 'NONE', *, *, #41501, .T. ) ; +#49382 = EDGE_CURVE ( 'NONE', #70845, #52338, #1816, .T. ) ; +#49384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49385 = EDGE_CURVE ( 'NONE', #70148, #49575, #38748, .T. ) ; +#49386 = AXIS2_PLACEMENT_3D ( 'NONE', #3324, #46831, #9590 ) ; +#49387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49388 = CONICAL_SURFACE ( 'NONE', #60457, 10.50000000000009600, 0.7853981633974500600 ) ; +#49389 = EDGE_LOOP ( 'NONE', ( #64711, #30156, #52421, #62367 ) ) ; +#49390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49392 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 22.50000000000000400, -9.258116921287651700 ) ) ; +#49393 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #645, #62966, #69197, #31945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377688305211900E-007, 0.0007331055842533627700 ), + .UNSPECIFIED. ) ; +#49394 = CARTESIAN_POINT ( 'NONE', ( 2.621978672527905300, 18.13131911501857000, -28.51286550264531900 ) ) ; +#49395 = VERTEX_POINT ( 'NONE', #45072 ) ; +#49396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49397 = CARTESIAN_POINT ( 'NONE', ( 17.24297557446588400, 80.16517473503343200, -28.29551658696740900 ) ) ; +#49398 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .F. ) ; +#49399 = EDGE_CURVE ( 'NONE', #1950, #72280, #57290, .T. ) ; +#49400 = LINE ( 'NONE', #26580, #64059 ) ; +#49401 = AXIS2_PLACEMENT_3D ( 'NONE', #26975, #64522, #2177 ) ; +#49402 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49403 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 80.69966441803876500, -28.70555803802997700 ) ) ; +#49404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52160, #76944, #8655, #58447 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199257500, 0.005758240019604112100 ), + .UNSPECIFIED. ) ; +#49405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#49406 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#49407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49408 = FACE_OUTER_BOUND ( 'NONE', #10550, .T. ) ; +#49409 = ORIENTED_EDGE ( 'NONE', *, *, #26650, .T. ) ; +#49410 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909300, 66.76150692817284900, -28.68631150211663100 ) ) ; +#49411 = ADVANCED_FACE ( 'NONE', ( #5701 ), #38565, .T. ) ; +#49412 = CARTESIAN_POINT ( 'NONE', ( -10.37141821671361400, 60.16749699759768800, -28.25056166218020700 ) ) ; +#49413 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49414 = CARTESIAN_POINT ( 'NONE', ( 4.036255108181464400, 89.94924284854707300, -28.20555803803014100 ) ) ; +#49415 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#49416 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#49417 = ADVANCED_FACE ( 'NONE', ( #67984 ), #49450, .F. ) ; +#49418 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .F. ) ; +#49419 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230963200, 39.78860447109613600, -28.53900456328626900 ) ) ; +#49420 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818076400, 59.94924284854686600, -28.20555803803047800 ) ) ; +#49421 = ADVANCED_FACE ( 'NONE', ( #53387 ), #16405, .T. ) ; +#49422 = CONICAL_SURFACE ( 'NONE', #6615, 10.50000000000009600, 0.7853981633974482800 ) ; +#49423 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714283800, 22.67681279774500400, -28.70555803802995200 ) ) ; +#49424 = PLANE ( 'NONE', #18596 ) ; +#49425 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274710100, 24.55000000000000100, -28.20555803802994200 ) ) ; +#49426 = CIRCLE ( 'NONE', #53718, 10.50000000000009800 ) ; +#49427 = AXIS2_PLACEMENT_3D ( 'NONE', #42726, #42454, #11757 ) ; +#49428 = VERTEX_POINT ( 'NONE', #70403 ) ; +#49429 = ORIENTED_EDGE ( 'NONE', *, *, #27609, .F. ) ; +#49430 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 26.00000000000001400, -1.205558038030005300 ) ) ; +#49431 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844498100, 56.13383585008156700, -28.37247596307076200 ) ) ; +#49432 = ORIENTED_EDGE ( 'NONE', *, *, #1826, .T. ) ; +#49433 = ORIENTED_EDGE ( 'NONE', *, *, #17646, .T. ) ; +#49434 = EDGE_LOOP ( 'NONE', ( #28712, #19267, #53562, #66740, #28781 ) ) ; +#49435 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .F. ) ; +#49436 = ORIENTED_EDGE ( 'NONE', *, *, #24750, .T. ) ; +#49437 = EDGE_LOOP ( 'NONE', ( #54254, #25771, #8688 ) ) ; +#49438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49439 = CARTESIAN_POINT ( 'NONE', ( -11.00202255363279100, 9.810924020321918300, -28.25433525492746500 ) ) ; +#49440 = AXIS2_PLACEMENT_3D ( 'NONE', #25729, #69223, #31966 ) ; +#49442 = EDGE_LOOP ( 'NONE', ( #73001, #51211, #73036 ) ) ; +#49441 = CARTESIAN_POINT ( 'NONE', ( 10.63950292779720100, 41.43250300240230600, -28.25438406275899800 ) ) ; +#49443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49444 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252818300, 39.13131911501876200, -28.51286550264508100 ) ) ; +#49445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36734, #80263, #74301, #37000 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656170356300, 0.001370301364302533400 ), + .UNSPECIFIED. ) ; +#49446 = CARTESIAN_POINT ( 'NONE', ( 10.07349184251536500, 60.22161678501183200, -28.29547179040443100 ) ) ; +#49447 = EDGE_CURVE ( 'NONE', #51153, #20371, #51389, .T. ) ; +#49448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49449 = VERTEX_POINT ( 'NONE', #39391 ) ; +#49450 = CONICAL_SURFACE ( 'NONE', #76666, 10.50000000000009900, 0.7853981633974518300 ) ; +#49451 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 77.94142842854297700, -28.20555803802997700 ) ) ; +#49452 = AXIS2_PLACEMENT_3D ( 'NONE', #26463, #69934, #32682 ) ; +#49453 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455562700, 59.72166103827332500, -28.53892303408223800 ) ) ; +#49454 = ORIENTED_EDGE ( 'NONE', *, *, #20353, .T. ) ; +#49455 = ORIENTED_EDGE ( 'NONE', *, *, #45164, .F. ) ; +#49456 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985000, 81.25732391202392100, -28.20555803802997700 ) ) ; +#49457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49458 = CIRCLE ( 'NONE', #11499, 10.00000000000009200 ) ; +#49459 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49461 = ORIENTED_EDGE ( 'NONE', *, *, #73956, .T. ) ; +#49462 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#49463 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#49464 = ORIENTED_EDGE ( 'NONE', *, *, #12468, .T. ) ; +#49465 = EDGE_CURVE ( 'NONE', #76892, #52219, #68169, .T. ) ; +#49466 = FACE_OUTER_BOUND ( 'NONE', #11194, .T. ) ; +#49467 = ORIENTED_EDGE ( 'NONE', *, *, #58489, .F. ) ; +#49468 = EDGE_CURVE ( 'NONE', #24568, #56906, #18346, .T. ) ; +#49469 = ORIENTED_EDGE ( 'NONE', *, *, #5339, .F. ) ; +#49470 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 69.66666666666667100, -5.535685056952199400 ) ) ; +#49471 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6, #37255, #12540, #56040 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576680500 ), + .UNSPECIFIED. ) ; +#49472 = CARTESIAN_POINT ( 'NONE', ( -17.14558873657294300, 92.63841046666405500, -28.47492765063121200 ) ) ; +#49473 = EDGE_CURVE ( 'NONE', #33231, #53468, #53706, .T. ) ; +#49474 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 34.66666666666667900, -8.133761268305512700 ) ) ; +#49475 = EDGE_CURVE ( 'NONE', #42272, #28171, #39215, .T. ) ; +#49476 = AXIS2_PLACEMENT_3D ( 'NONE', #38483, #1250, #44721 ) ; +#49477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49478 = CONICAL_SURFACE ( 'NONE', #75985, 10.50000000000009600, 0.7853981633974500600 ) ; +#49479 = CIRCLE ( 'NONE', #45230, 10.50000000000009800 ) ; +#49480 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, -0.1666666666666480100, 6.794441961969992500 ) ) ; +#49481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78506, #47969, #66779, #29550 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001525413945291486600 ), + .UNSPECIFIED. ) ; +#49482 = ORIENTED_EDGE ( 'NONE', *, *, #7606, .F. ) ; +#49483 = VERTEX_POINT ( 'NONE', #52151 ) ; +#49484 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49485 = AXIS2_PLACEMENT_3D ( 'NONE', #34745, #78250, #40987 ) ; +#49486 = EDGE_CURVE ( 'NONE', #28925, #15824, #1772, .T. ) ; +#49487 = EDGE_CURVE ( 'NONE', #57348, #59799, #24790, .T. ) ; +#49488 = EDGE_CURVE ( 'NONE', #22296, #7767, #66055, .T. ) ; +#49489 = ADVANCED_FACE ( 'NONE', ( #34910 ), #78702, .F. ) ; +#49490 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#49491 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 80.58127875436079500, -28.53757464917570600 ) ) ; +#49492 = CONICAL_SURFACE ( 'NONE', #40457, 10.00000000000009400, 0.7853981633974447300 ) ; +#49493 = ORIENTED_EDGE ( 'NONE', *, *, #17355, .F. ) ; +#49494 = FACE_OUTER_BOUND ( 'NONE', #5687, .T. ) ; +#49495 = ORIENTED_EDGE ( 'NONE', *, *, #52315, .F. ) ; +#49496 = EDGE_LOOP ( 'NONE', ( #3956, #60711, #38999, #75953 ) ) ; +#49497 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998600, 11.47376207875059600, -28.70555803802994200 ) ) ; +#49498 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#49499 = ORIENTED_EDGE ( 'NONE', *, *, #62256, .F. ) ; +#49500 = FACE_OUTER_BOUND ( 'NONE', #21698, .T. ) ; +#49501 = ORIENTED_EDGE ( 'NONE', *, *, #35580, .F. ) ; +#49502 = VERTEX_POINT ( 'NONE', #52697 ) ; +#49503 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#49504 = ORIENTED_EDGE ( 'NONE', *, *, #13221, .F. ) ; +#49505 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#49506 = ORIENTED_EDGE ( 'NONE', *, *, #6961, .F. ) ; +#49507 = ORIENTED_EDGE ( 'NONE', *, *, #66465, .T. ) ; +#49508 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .F. ) ; +#49509 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 61.01872124563918500, -28.53757464917570600 ) ) ; +#49510 = EDGE_CURVE ( 'NONE', #35281, #47841, #31007, .T. ) ; +#49511 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807117100, 76.79999999999977000, -28.70555803803014400 ) ) ; +#49512 = ADVANCED_FACE ( 'NONE', ( #80625 ), #29097, .F. ) ; +#49513 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#49514 = AXIS2_PLACEMENT_3D ( 'NONE', #25325, #31573, #62565 ) ; +#49515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49516 = AXIS2_PLACEMENT_3D ( 'NONE', #15238, #58748, #21516 ) ; +#49517 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .T. ) ; +#49518 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567140300, 9.746602415621863400, -28.20555803803009500 ) ) ; +#49519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44406, #6923, #56982, #19714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202225457400E-007, 0.0008724366121407790200 ), + .UNSPECIFIED. ) ; +#49520 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714272300, 36.92318720225497900, -28.70555803802995200 ) ) ; +#49521 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484870100, 60.22161678501181100, -28.29547179040452300 ) ) ; +#49522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49523 = FACE_OUTER_BOUND ( 'NONE', #42162, .T. ) ; +#49524 = ORIENTED_EDGE ( 'NONE', *, *, #75135, .F. ) ; +#49525 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544465500, 81.87833896172675500, -28.53892303408252600 ) ) ; +#49526 = ORIENTED_EDGE ( 'NONE', *, *, #74688, .F. ) ; +#49527 = ORIENTED_EDGE ( 'NONE', *, *, #59152, .T. ) ; +#49528 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 81.65075715145280800, -28.20555803802997700 ) ) ; +#49529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49530 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.418457393421045200, -28.68863412692832800 ) ) ; +#49531 = FACE_OUTER_BOUND ( 'NONE', #33766, .T. ) ; +#49532 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#49533 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#49534 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#49535 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428555200, 81.52858243452105600, -28.70555803802997700 ) ) ; +#49536 = VERTEX_POINT ( 'NONE', #3200 ) ; +#49537 = ADVANCED_FACE ( 'NONE', ( #47498 ), #46701, .T. ) ; +#49538 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62705, #56148, #31431, #25447 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674017710600E-007, 0.0007987728781051934900 ), + .UNSPECIFIED. ) ; +#49539 = AXIS2_PLACEMENT_3D ( 'NONE', #33265, #39777, #58552 ) ; +#49540 = CIRCLE ( 'NONE', #5627, 10.00000000000009400 ) ; +#49541 = ORIENTED_EDGE ( 'NONE', *, *, #70104, .T. ) ; +#49542 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#49543 = ORIENTED_EDGE ( 'NONE', *, *, #68447, .F. ) ; +#49544 = VERTEX_POINT ( 'NONE', #71774 ) ; +#49545 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 40.66666666666667900, 2.794441961969992100 ) ) ; +#49546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49547 = AXIS2_PLACEMENT_3D ( 'NONE', #80268, #42996, #5744 ) ; +#49548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49549 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#49550 = CIRCLE ( 'NONE', #80642, 9.500000000000097700 ) ; +#49551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49552 = CIRCLE ( 'NONE', #37378, 10.50000000000009200 ) ; +#49553 = ORIENTED_EDGE ( 'NONE', *, *, #34417, .T. ) ; +#49554 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17874, #30413, #36615, #80145 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318563006400, 0.001319946300100793200 ), + .UNSPECIFIED. ) ; +#49555 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#49556 = ORIENTED_EDGE ( 'NONE', *, *, #12722, .T. ) ; +#49557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49558 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510358000, 49.65930907398620800, -28.35186440610858900 ) ) ; +#49559 = CARTESIAN_POINT ( 'NONE', ( 3.778746597914915700, 49.66476742015635900, -28.30311934730018200 ) ) ; +#49560 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49561 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.43250300240195800, -28.20555803803030800 ) ) ; +#49562 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 12.00000000000000900, -1.205558038030002800 ) ) ; +#49563 = CONICAL_SURFACE ( 'NONE', #24279, 10.00000000000009200, 0.7853981633974447300 ) ; +#49564 = ORIENTED_EDGE ( 'NONE', *, *, #52814, .T. ) ; +#49565 = FACE_OUTER_BOUND ( 'NONE', #18620, .T. ) ; +#49566 = EDGE_LOOP ( 'NONE', ( #56244, #28421, #25210, #66629 ) ) ; +#49567 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49569 = EDGE_CURVE ( 'NONE', #17037, #26822, #62137, .T. ) ; +#49570 = ORIENTED_EDGE ( 'NONE', *, *, #18372, .F. ) ; +#49571 = CONICAL_SURFACE ( 'NONE', #68365, 10.50000000000009600, 0.7853981633974482800 ) ; +#49572 = EDGE_CURVE ( 'NONE', #38695, #77231, #10333, .T. ) ; +#49573 = EDGE_LOOP ( 'NONE', ( #59823, #26689, #5984 ) ) ; +#49574 = VERTEX_POINT ( 'NONE', #40739 ) ; +#49575 = VERTEX_POINT ( 'NONE', #28281 ) ; +#49576 = ORIENTED_EDGE ( 'NONE', *, *, #4108, .F. ) ; +#49577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49578 = VERTEX_POINT ( 'NONE', #28559 ) ; +#49579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49580 = CARTESIAN_POINT ( 'NONE', ( 16.08902460162561700, 28.51983257179051600, -28.64886839674169700 ) ) ; +#49581 = ORIENTED_EDGE ( 'NONE', *, *, #50328, .T. ) ; +#49582 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49583 = ORIENTED_EDGE ( 'NONE', *, *, #46011, .F. ) ; +#49584 = EDGE_CURVE ( 'NONE', #56323, #48083, #76629, .T. ) ; +#49585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49586 = ADVANCED_FACE ( 'NONE', ( #32932 ), #10014, .T. ) ; +#49587 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#49588 = EDGE_CURVE ( 'NONE', #3836, #49674, #45532, .T. ) ; +#49589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49590 = ORIENTED_EDGE ( 'NONE', *, *, #75836, .T. ) ; +#49591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49592 = FACE_OUTER_BOUND ( 'NONE', #9097, .T. ) ; +#49593 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 90.34267608797601700, -28.20555803803030800 ) ) ; +#49594 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 46.50000000000001400, -4.865812075874393000 ) ) ; +#49595 = ORIENTED_EDGE ( 'NONE', *, *, #73373, .T. ) ; +#49596 = EDGE_CURVE ( 'NONE', #52661, #8255, #62192, .T. ) ; +#49597 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971600, 75.15853008474741200, -28.52629299565626700 ) ) ; +#49598 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807188400, 84.79999999999986900, -28.70555803803014400 ) ) ; +#49599 = ORIENTED_EDGE ( 'NONE', *, *, #31800, .T. ) ; +#49600 = ORIENTED_EDGE ( 'NONE', *, *, #34903, .F. ) ; +#49601 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158400, 23.59761904761920400, -28.70555803802994200 ) ) ; +#49602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49603 = CARTESIAN_POINT ( 'NONE', ( 4.801413064970932800, 94.72249899919830800, -28.20555803803030800 ) ) ; +#49604 = CONICAL_SURFACE ( 'NONE', #25414, 10.00000000000009200, 0.7853981633974447300 ) ; +#49605 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49606 = ADVANCED_FACE ( 'NONE', ( #64110 ), #10549, .F. ) ; +#49607 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49608 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49609 = AXIS2_PLACEMENT_3D ( 'NONE', #64691, #27435, #70912 ) ; +#49610 = ORIENTED_EDGE ( 'NONE', *, *, #67051, .F. ) ; +#49611 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49612 = EDGE_CURVE ( 'NONE', #26075, #27460, #27104, .T. ) ; +#49613 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372569300, 43.66464174796073600, -28.53896444442199600 ) ) ; +#49614 = EDGE_CURVE ( 'NONE', #10136, #55748, #43598, .T. ) ; +#49615 = EDGE_CURVE ( 'NONE', #73484, #62498, #60201, .T. ) ; +#49616 = ORIENTED_EDGE ( 'NONE', *, *, #33715, .F. ) ; +#49617 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52320, #15092, #71126, #33870 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202225457400E-007, 0.0008724366121404667700 ), + .UNSPECIFIED. ) ; +#49618 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49619 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#49620 = CARTESIAN_POINT ( 'NONE', ( 1.901631271234047300, 50.54999999999999700, -28.62400292823466000 ) ) ; +#49621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49622 = AXIS2_PLACEMENT_3D ( 'NONE', #20434, #15318, #6327 ) ; +#49623 = FACE_OUTER_BOUND ( 'NONE', #22011, .T. ) ; +#49625 = ORIENTED_EDGE ( 'NONE', *, *, #9215, .T. ) ; +#49624 = ADVANCED_FACE ( 'NONE', ( #76714 ), #47774, .T. ) ; +#49626 = ADVANCED_FACE ( 'NONE', ( #12508 ), #72839, .T. ) ; +#49627 = CARTESIAN_POINT ( 'NONE', ( -9.438174915909122800, 9.983857102125124800, -28.57719681746174700 ) ) ; +#49628 = VERTEX_POINT ( 'NONE', #17082 ) ; +#49629 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#49630 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844493900, 85.79999999999985500, -28.20555803803014400 ) ) ; +#49631 = AXIS2_PLACEMENT_3D ( 'NONE', #58633, #21395, #64930 ) ; +#49632 = AXIS2_PLACEMENT_3D ( 'NONE', #78918, #60424, #16890 ) ; +#49633 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49634 = CARTESIAN_POINT ( 'NONE', ( 11.39744808726311500, 90.86668251344210000, -28.60300612529368900 ) ) ; +#49635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49636 = ADVANCED_FACE ( 'NONE', ( #74783 ), #39721, .F. ) ; +#49637 = CIRCLE ( 'NONE', #6771, 10.00000000000009200 ) ; +#49638 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 52.83333333333335000, 9.794441961969999600 ) ) ; +#49639 = ORIENTED_EDGE ( 'NONE', *, *, #48792, .T. ) ; +#49640 = EDGE_LOOP ( 'NONE', ( #3417, #29457, #21910, #14830 ) ) ; +#49641 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 18.00000000000000700, -6.205558038030003100 ) ) ; +#49642 = AXIS2_PLACEMENT_3D ( 'NONE', #40725, #28270, #3449 ) ; +#49643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49644 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49645 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507542800, 31.52620220503759500, -28.70555803802995200 ) ) ; +#49646 = FACE_OUTER_BOUND ( 'NONE', #79135, .T. ) ; +#49647 = EDGE_LOOP ( 'NONE', ( #20673, #41892, #6020 ) ) ; +#49648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49649 = EDGE_LOOP ( 'NONE', ( #23521, #64504, #42733 ) ) ; +#49650 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459550000, 52.51973550835661800, -28.70555803802997700 ) ) ; +#49651 = EDGE_CURVE ( 'NONE', #1536, #52899, #56260, .T. ) ; +#49652 = CIRCLE ( 'NONE', #21449, 9.500000000000099500 ) ; +#49653 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.867620087580474900, -28.26633708900882500 ) ) ; +#49654 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 20.33333333333334300, 8.320721403598817300 ) ) ; +#49655 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000408600, 67.94142842854304800, -28.20555803803030800 ) ) ; +#49656 = ORIENTED_EDGE ( 'NONE', *, *, #27154, .T. ) ; +#49657 = AXIS2_PLACEMENT_3D ( 'NONE', #32770, #76279, #39005 ) ; +#49658 = VERTEX_POINT ( 'NONE', #66851 ) ; +#49659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27732, #65001, #21474, #71217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649374478900E-007, 0.0007596411030280901000 ), + .UNSPECIFIED. ) ; +#49660 = ORIENTED_EDGE ( 'NONE', *, *, #23448, .F. ) ; +#49661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49663 = ORIENTED_EDGE ( 'NONE', *, *, #33464, .T. ) ; +#49664 = ORIENTED_EDGE ( 'NONE', *, *, #33319, .F. ) ; +#49665 = CARTESIAN_POINT ( 'NONE', ( 2.813460021729300200, 6.877501000800539700, -28.20555803802993100 ) ) ; +#49666 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49667 = CARTESIAN_POINT ( 'NONE', ( 11.03590776526127300, 18.00212297965135000, -28.25344967589778400 ) ) ; +#49668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49669 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#49670 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260020200, 60.20034312068835200, -28.70555803803001600 ) ) ; +#49671 = CONICAL_SURFACE ( 'NONE', #57270, 10.00000000000009400, 0.7853981633974447300 ) ; +#49672 = AXIS2_PLACEMENT_3D ( 'NONE', #70990, #39711, #33740 ) ; +#49674 = VERTEX_POINT ( 'NONE', #4810 ) ; +#49673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49675 = ORIENTED_EDGE ( 'NONE', *, *, #11667, .F. ) ; +#49676 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804071400, 57.94142842854297700, -28.37229765499282100 ) ) ; +#49677 = ORIENTED_EDGE ( 'NONE', *, *, #49805, .T. ) ; +#49678 = ORIENTED_EDGE ( 'NONE', *, *, #24523, .F. ) ; +#49679 = VERTEX_POINT ( 'NONE', #73106 ) ; +#49680 = ORIENTED_EDGE ( 'NONE', *, *, #7813, .F. ) ; +#49681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49682 = CARTESIAN_POINT ( 'NONE', ( 3.073491842515437200, 90.22161678501173300, -28.29547179040451300 ) ) ; +#49683 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 65.79999999999998300, -28.70555803802997700 ) ) ; +#49684 = VERTEX_POINT ( 'NONE', #35837 ) ; +#49685 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 80.03751622186513300, -28.32723995587630800 ) ) ; +#49686 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818145900, 89.94924284854691600, -28.20555803803031100 ) ) ; +#49687 = CIRCLE ( 'NONE', #80081, 9.500000000000097700 ) ; +#49688 = VERTEX_POINT ( 'NONE', #67112 ) ; +#49689 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49690 = ADVANCED_FACE ( 'NONE', ( #14450 ), #70861, .F. ) ; +#49691 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825480200, 60.16054007504464400, -28.34042301926889700 ) ) ; +#49692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49693 = EDGE_CURVE ( 'NONE', #7631, #3823, #47688, .T. ) ; +#49694 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 23.83333333333333600, -3.349151577478984600 ) ) ; +#49695 = CONICAL_SURFACE ( 'NONE', #49790, 10.00000000000009600, 0.7853981633974482800 ) ; +#49696 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#49697 = VERTEX_POINT ( 'NONE', #5088 ) ; +#49698 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489605100, 39.15930907398613000, -28.35186440610853600 ) ) ; +#49699 = ADVANCED_FACE ( 'NONE', ( #25140 ), #37753, .T. ) ; +#49700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49701 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49703 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49704 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#49705 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819507300, 81.65075715145330500, -28.20555803802997700 ) ) ; +#49706 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49707 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188004200, 20.06914835874664500, -28.45573375118225100 ) ) ; +#49708 = EDGE_CURVE ( 'NONE', #79993, #58529, #33254, .T. ) ; +#49709 = CARTESIAN_POINT ( 'NONE', ( -1.116254736416754100, 24.54999999999998300, -28.53994725305374300 ) ) ; +#49710 = EDGE_CURVE ( 'NONE', #10560, #5323, #18799, .T. ) ; +#49711 = ADVANCED_FACE ( 'NONE', ( #23191 ), #4676, .F. ) ; +#49712 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60645, #4589, #29644, #73152 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950280427000E-007, 0.0007331043932794549500 ), + .UNSPECIFIED. ) ; +#49713 = ORIENTED_EDGE ( 'NONE', *, *, #68925, .T. ) ; +#49714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49715 = VERTEX_POINT ( 'NONE', #80153 ) ; +#49716 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743735100, 87.93535825203926500, -28.53896444442205600 ) ) ; +#49717 = ORIENTED_EDGE ( 'NONE', *, *, #49117, .T. ) ; +#49718 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39003, #45245, #20551, #64078 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.666343907633296100E-017, 0.001246264537621126000 ), + .UNSPECIFIED. ) ; +#49719 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286464800, 82.66699492863851600, -28.67024809316607300 ) ) ; +#49720 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49721 = AXIS2_PLACEMENT_3D ( 'NONE', #24957, #12458, #74735 ) ; +#49722 = EDGE_CURVE ( 'NONE', #55672, #68897, #4331, .T. ) ; +#49723 = PLANE ( 'NONE', #34675 ) ; +#49724 = EDGE_CURVE ( 'NONE', #61855, #9671, #70648, .T. ) ; +#49725 = EDGE_CURVE ( 'NONE', #43592, #62129, #41663, .T. ) ; +#49726 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#49727 = ADVANCED_FACE ( 'NONE', ( #6624 ), #35833, .T. ) ; +#49728 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80108, #42823, #18087, #61633 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764792204233700E-007, 0.0009376791149929310500 ), + .UNSPECIFIED. ) ; +#49729 = CONICAL_SURFACE ( 'NONE', #55946, 10.50000000000009600, 0.7853981633974500600 ) ; +#49730 = VERTEX_POINT ( 'NONE', #18408 ) ; +#49731 = ORIENTED_EDGE ( 'NONE', *, *, #53116, .F. ) ; +#49732 = AXIS2_PLACEMENT_3D ( 'NONE', #71612, #77861, #28124 ) ; +#49733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49734 = ORIENTED_EDGE ( 'NONE', *, *, #40937, .F. ) ; +#49735 = CONICAL_SURFACE ( 'NONE', #48440, 10.00000000000009400, 0.7853981633974447300 ) ; +#49736 = ORIENTED_EDGE ( 'NONE', *, *, #79300, .T. ) ; +#49737 = ORIENTED_EDGE ( 'NONE', *, *, #74202, .F. ) ; +#49738 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124977800, 66.46717019299478600, -28.53914313452736800 ) ) ; +#49739 = VERTEX_POINT ( 'NONE', #55654 ) ; +#49740 = EDGE_LOOP ( 'NONE', ( #41362, #57847, #28369, #68257 ) ) ; +#49741 = ADVANCED_FACE ( 'NONE', ( #8562 ), #2705, .T. ) ; +#49742 = AXIS2_PLACEMENT_3D ( 'NONE', #18257, #12000, #68024 ) ; +#49743 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 67.50000000000000000, 2.454695999814385600 ) ) ; +#49744 = AXIS2_PLACEMENT_3D ( 'NONE', #53516, #35051, #10008 ) ; +#49745 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21755, #15499, #34259, #77763 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019565698399300E-007, 0.0004669842289007912700 ), + .UNSPECIFIED. ) ; +#49746 = AXIS2_PLACEMENT_3D ( 'NONE', #29428, #47846, #79175 ) ; +#49747 = FACE_OUTER_BOUND ( 'NONE', #49984, .T. ) ; +#49748 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.43250300240228500, -28.20555803802997700 ) ) ; +#49749 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 32.50000000000001400, 4.650848422521016300 ) ) ; +#49750 = ORIENTED_EDGE ( 'NONE', *, *, #35659, .T. ) ; +#49751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49752 = FACE_OUTER_BOUND ( 'NONE', #59530, .T. ) ; +#49753 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195941900, 12.15857157145700800, -28.37229765499279200 ) ) ; +#49754 = ORIENTED_EDGE ( 'NONE', *, *, #7027, .F. ) ; +#49755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49756 = ORIENTED_EDGE ( 'NONE', *, *, #15685, .F. ) ; +#49757 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 69.83333333333334300, -12.20555803803000600 ) ) ; +#49758 = ORIENTED_EDGE ( 'NONE', *, *, #35257, .F. ) ; +#49759 = VERTEX_POINT ( 'NONE', #74446 ) ; +#49760 = EDGE_LOOP ( 'NONE', ( #9460, #5998, #78806, #32676, #47569, #71234 ) ) ; +#49761 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823701300, 31.90456253568396500, -28.61277292027075700 ) ) ; +#49762 = CONICAL_SURFACE ( 'NONE', #51320, 10.50000000000009800, 0.7853981633974518300 ) ; +#49763 = AXIS2_PLACEMENT_3D ( 'NONE', #77085, #39822, #2530 ) ; +#49764 = EDGE_CURVE ( 'NONE', #32526, #80471, #56181, .T. ) ; +#49765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1676, #27006, #33243, #76743 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648670355800E-007, 0.0007596411030278574300 ), + .UNSPECIFIED. ) ; +#49766 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49767 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 10.12753447840889900, -28.38801640354855500 ) ) ; +#49768 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 9.968680884981219800, -28.51286550264509500 ) ) ; +#49769 = CARTESIAN_POINT ( 'NONE', ( -3.628494729608066700, 81.43250300240228500, -28.25053119339279900 ) ) ; +#49770 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#49771 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 71.25732391202359400, -28.20555803803030800 ) ) ; +#49772 = FACE_OUTER_BOUND ( 'NONE', #30512, .T. ) ; +#49773 = ORIENTED_EDGE ( 'NONE', *, *, #60269, .T. ) ; +#49774 = ORIENTED_EDGE ( 'NONE', *, *, #77124, .F. ) ; +#49775 = EDGE_CURVE ( 'NONE', #57688, #77385, #41708, .T. ) ; +#49776 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49777 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49778 = AXIS2_PLACEMENT_3D ( 'NONE', #39471, #64278, #2198 ) ; +#49779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49782 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#49783 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#49784 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000004100, 22.99926474563217500, -28.70555803802995200 ) ) ; +#49785 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194906300, 66.76150692817331800, -28.68631150211663400 ) ) ; +#49786 = CARTESIAN_POINT ( 'NONE', ( -7.899665551839508000, 60.79999999999999000, -28.20555803802988500 ) ) ; +#49787 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#49788 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819155100, 61.65075715145276500, -28.20555803803005900 ) ) ; +#49789 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999979400, 60.79999999999982700, -28.20555803803014100 ) ) ; +#49790 = AXIS2_PLACEMENT_3D ( 'NONE', #61280, #5494, #11760 ) ; +#49791 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609431200, 61.46283204837340000, -28.48697406221666700 ) ) ; +#49792 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471864200, 20.46868088498121800, -28.51286550264509900 ) ) ; +#49793 = ORIENTED_EDGE ( 'NONE', *, *, #18049, .F. ) ; +#49794 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#49795 = VERTEX_POINT ( 'NONE', #74711 ) ; +#49796 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 20.33333333333334300, 1.294441961969997200 ) ) ; +#49797 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49798 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655646000, 31.17701665379238200, -28.20555803802996000 ) ) ; +#49799 = AXIS2_PLACEMENT_3D ( 'NONE', #19053, #278, #25335 ) ; +#49800 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49801 = CIRCLE ( 'NONE', #52232, 9.500000000000097700 ) ; +#49802 = ORIENTED_EDGE ( 'NONE', *, *, #42038, .T. ) ; +#49803 = CIRCLE ( 'NONE', #35295, 10.50000000000009200 ) ; +#49805 = EDGE_CURVE ( 'NONE', #16929, #33093, #19282, .T. ) ; +#49804 = ORIENTED_EDGE ( 'NONE', *, *, #32376, .T. ) ; +#49806 = ADVANCED_FACE ( 'NONE', ( #21253 ), #33878, .F. ) ; +#49807 = CONICAL_SURFACE ( 'NONE', #28140, 10.50000000000009600, 0.7853981633974500600 ) ; +#49808 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49809 = EDGE_LOOP ( 'NONE', ( #9825, #66079, #36488, #3725, #27395 ) ) ; +#49810 = ORIENTED_EDGE ( 'NONE', *, *, #46369, .T. ) ; +#49811 = VERTEX_POINT ( 'NONE', #25198 ) ; +#49812 = ADVANCED_FACE ( 'NONE', ( #54319 ), #760, .F. ) ; +#49813 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 38.49999999999996400, -7.061964498581016200 ) ) ; +#49814 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040173000, 57.94142842854297000, -28.37229765499279200 ) ) ; +#49815 = ORIENTED_EDGE ( 'NONE', *, *, #9473, .F. ) ; +#49816 = CIRCLE ( 'NONE', #31703, 10.50000000000009800 ) ; +#49817 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 32.92856308690590300, -28.36981695106779400 ) ) ; +#49818 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310551700, 71.49769010897077200, -28.61774594594320900 ) ) ; +#49819 = ADVANCED_FACE ( 'NONE', ( #66978 ), #48439, .T. ) ; +#49820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50292, #6812, #69103, #31852 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521659447600, 0.0009492057883278657200 ), + .UNSPECIFIED. ) ; +#49821 = EDGE_LOOP ( 'NONE', ( #33240, #58767, #2829 ) ) ; +#49822 = ORIENTED_EDGE ( 'NONE', *, *, #6846, .F. ) ; +#49823 = EDGE_CURVE ( 'NONE', #25145, #46762, #65051, .T. ) ; +#49824 = CONICAL_SURFACE ( 'NONE', #6625, 10.00000000000009400, 0.7853981633974447300 ) ; +#49825 = ORIENTED_EDGE ( 'NONE', *, *, #1371, .F. ) ; +#49826 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846306100, 70.79999999999998300, -28.55171188418376000 ) ) ; +#49827 = ORIENTED_EDGE ( 'NONE', *, *, #68948, .F. ) ; +#49828 = ORIENTED_EDGE ( 'NONE', *, *, #29800, .F. ) ; +#49829 = EDGE_LOOP ( 'NONE', ( #1791, #6390, #32541 ) ) ; +#49830 = FACE_OUTER_BOUND ( 'NONE', #36581, .T. ) ; +#49831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49832 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5832, #49305, #24600, #68105 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001119323292485706200 ), + .UNSPECIFIED. ) ; +#49833 = ORIENTED_EDGE ( 'NONE', *, *, #42936, .F. ) ; +#49834 = CONICAL_SURFACE ( 'NONE', #18489, 10.50000000000009800, 0.7853981633974518300 ) ; +#49835 = AXIS2_PLACEMENT_3D ( 'NONE', #17026, #60549, #23273 ) ; +#49836 = EDGE_CURVE ( 'NONE', #25229, #56129, #27297, .T. ) ; +#49837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57250, #63535, #38715, #1481 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217704565863900E-007, 0.0008482615949370341000 ), + .UNSPECIFIED. ) ; +#49838 = EDGE_CURVE ( 'NONE', #37505, #19681, #50368, .T. ) ; +#49839 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284896200, 18.27966528189930200, -28.30868034705283200 ) ) ; +#49840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49842 = CARTESIAN_POINT ( 'NONE', ( 4.002028721724268900, 41.31091476818473800, -28.25432823872346700 ) ) ; +#49843 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 39.53085164125334900, -28.45573375118225500 ) ) ; +#49844 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 9.833333333333342800, 1.741883078712340300 ) ) ; +#49845 = ORIENTED_EDGE ( 'NONE', *, *, #69889, .T. ) ; +#49846 = EDGE_CURVE ( 'NONE', #54777, #36158, #52331, .T. ) ; +#49847 = AXIS2_PLACEMENT_3D ( 'NONE', #10320, #78611, #66090 ) ; +#49848 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#49849 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49850 = CONICAL_SURFACE ( 'NONE', #38241, 10.50000000000009600, 0.7853981633974482800 ) ; +#49851 = EDGE_LOOP ( 'NONE', ( #38975, #61387, #11495 ) ) ; +#49852 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49853 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44107, #37878, #56661, #19402 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389873878000E-007, 0.0008082646680357293300 ), + .UNSPECIFIED. ) ; +#49854 = DIRECTION ( 'NONE', ( -1.000000000000000000, -7.665825646221153700E-014, 0.0000000000000000000 ) ) ; +#49855 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49856 = AXIS2_PLACEMENT_3D ( 'NONE', #80460, #30696, #36924 ) ; +#49857 = AXIS2_PLACEMENT_3D ( 'NONE', #14461, #76456, #26988 ) ; +#49858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34887, #47074, #78122, #78412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885322300 ), + .UNSPECIFIED. ) ; +#49859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49860 = EDGE_CURVE ( 'NONE', #48486, #34215, #12833, .T. ) ; +#49861 = EDGE_CURVE ( 'NONE', #53768, #12646, #79150, .T. ) ; +#49862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49864 = AXIS2_PLACEMENT_3D ( 'NONE', #4282, #29100, #47773 ) ; +#49863 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49865 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#49866 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 44.33333333333334300, 1.294441961969997200 ) ) ; +#49867 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 73.67681279774498600, -28.70555803802997700 ) ) ; +#49868 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063250600, 28.50210619075101100, -28.25343951603328200 ) ) ; +#49869 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580932000, 48.36736912940428800, -28.67620115463453000 ) ) ; +#49870 = ORIENTED_EDGE ( 'NONE', *, *, #44519, .F. ) ; +#49871 = VERTEX_POINT ( 'NONE', #20857 ) ; +#49872 = EDGE_CURVE ( 'NONE', #54900, #38741, #64700, .T. ) ; +#49873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49874 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534294900, 80.65007990305389300, -28.43638873268730200 ) ) ; +#49875 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#49876 = AXIS2_PLACEMENT_3D ( 'NONE', #55901, #56160, #18913 ) ; +#49877 = AXIS2_PLACEMENT_3D ( 'NONE', #46434, #9188, #52707 ) ; +#49878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49880 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#49881 = VERTEX_POINT ( 'NONE', #51808 ) ; +#49882 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 20.46868088498122200, -28.51286550264510200 ) ) ; +#49883 = CONICAL_SURFACE ( 'NONE', #11059, 10.50000000000009600, 0.7853981633974500600 ) ; +#49884 = CARTESIAN_POINT ( 'NONE', ( 9.438065798940472800, 49.61613388835919400, -28.57723500840080500 ) ) ; +#49885 = ORIENTED_EDGE ( 'NONE', *, *, #31416, .T. ) ; +#49886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49888 = CONICAL_SURFACE ( 'NONE', #79026, 10.00000000000009400, 0.7853981633974447300 ) ; +#49889 = ORIENTED_EDGE ( 'NONE', *, *, #18309, .T. ) ; +#49890 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49891 = ORIENTED_EDGE ( 'NONE', *, *, #47489, .F. ) ; +#49892 = FACE_OUTER_BOUND ( 'NONE', #51668, .T. ) ; +#49893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49895 = ORIENTED_EDGE ( 'NONE', *, *, #68326, .F. ) ; +#49894 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 55.79999999999999000, -28.20555803802997700 ) ) ; +#49896 = ORIENTED_EDGE ( 'NONE', *, *, #42558, .T. ) ; +#49897 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 42.97376207875059600, -28.70555803802997700 ) ) ; +#49898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49899 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#49900 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#49901 = FACE_OUTER_BOUND ( 'NONE', #42277, .T. ) ; +#49902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49903 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54626, #11127, #73409, #36144 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898987800 ), + .UNSPECIFIED. ) ; +#49904 = ADVANCED_FACE ( 'NONE', ( #15389 ), #30014, .F. ) ; +#49905 = VERTEX_POINT ( 'NONE', #52077 ) ; +#49906 = AXIS2_PLACEMENT_3D ( 'NONE', #27418, #39900, #64677 ) ; +#49907 = CIRCLE ( 'NONE', #11300, 9.500000000000097700 ) ; +#49908 = EDGE_LOOP ( 'NONE', ( #33445, #43045, #64335, #58537 ) ) ; +#49909 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#49910 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 50.66666666666667100, -10.73183747965883100 ) ) ; +#49911 = VERTEX_POINT ( 'NONE', #14856 ) ; +#49912 = ORIENTED_EDGE ( 'NONE', *, *, #53803, .T. ) ; +#49913 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310703400, 70.10230989102889500, -28.61774594594300700 ) ) ; +#49914 = ORIENTED_EDGE ( 'NONE', *, *, #21883, .T. ) ; +#49915 = ADVANCED_FACE ( 'NONE', ( #46474 ), #77658, .F. ) ; +#49916 = CIRCLE ( 'NONE', #43943, 10.00000000000009600 ) ; +#49917 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 15.83333333333335500, 3.794441961969996900 ) ) ; +#49918 = AXIS2_PLACEMENT_3D ( 'NONE', #55153, #17911, #61456 ) ; +#49919 = ORIENTED_EDGE ( 'NONE', *, *, #29217, .F. ) ; +#49920 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49921 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#49922 = EDGE_CURVE ( 'NONE', #62491, #18101, #13450, .T. ) ; +#49923 = ORIENTED_EDGE ( 'NONE', *, *, #79125, .T. ) ; +#49924 = EDGE_LOOP ( 'NONE', ( #24084, #12100, #42717, #73835 ) ) ; +#49925 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747182600, 39.13131911501876200, -28.51286550264508800 ) ) ; +#49926 = EDGE_LOOP ( 'NONE', ( #76398, #71241, #78351 ) ) ; +#49927 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.49747404049737300, -28.26641963845862500 ) ) ; +#49928 = CONICAL_SURFACE ( 'NONE', #59691, 10.50000000000009600, 0.7853981633974482800 ) ; +#49929 = CARTESIAN_POINT ( 'NONE', ( 5.685965509778316800, 24.54999999999998300, -28.37321477197628300 ) ) ; +#49930 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 18.16666666666667100, -12.20555803803000000 ) ) ; +#49931 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37228, #74525, #49719, #12518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-018, 0.001871986839425528200 ), + .UNSPECIFIED. ) ; +#49933 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 55.79999999999999000, -28.20555803802997700 ) ) ; +#49934 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 36.94142842854297000, -28.20555803802995200 ) ) ; +#49935 = ADVANCED_FACE ( 'NONE', ( #58219 ), #28063, .F. ) ; +#49936 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49938 = CIRCLE ( 'NONE', #22693, 9.500000000000097700 ) ; +#49939 = EDGE_CURVE ( 'NONE', #16929, #56416, #50173, .T. ) ; +#49940 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49941 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#49943 = EDGE_CURVE ( 'NONE', #14833, #48826, #35757, .T. ) ; +#49942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47054, #65871, #3826, #47313 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735867376600E-007, 0.0006896863566006315200 ), + .UNSPECIFIED. ) ; +#49944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49945 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187800, 30.96868088498122200, -28.51286550264512300 ) ) ; +#49946 = CARTESIAN_POINT ( 'NONE', ( -3.935438998026763900, 81.50961459723747300, -28.29483879644642000 ) ) ; +#49948 = ORIENTED_EDGE ( 'NONE', *, *, #4011, .F. ) ; +#49947 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49949 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 83.67681279774500100, -28.70555803802997700 ) ) ; +#49950 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609139900, 70.13716795162604000, -28.48697406221692700 ) ) ; +#49951 = ORIENTED_EDGE ( 'NONE', *, *, #77856, .F. ) ; +#49952 = EDGE_CURVE ( 'NONE', #59820, #49127, #61145, .T. ) ; +#49954 = CARTESIAN_POINT ( 'NONE', ( -15.18312431344644000, 9.816875686553551400, -28.70406746705046100 ) ) ; +#49953 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754700, 50.20543520232829600, -28.70555803802996700 ) ) ; +#49955 = EDGE_CURVE ( 'NONE', #45464, #37884, #63081, .T. ) ; +#49956 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#49957 = CIRCLE ( 'NONE', #24053, 9.500000000000099500 ) ; +#49958 = EDGE_LOOP ( 'NONE', ( #4827, #65851, #12730 ) ) ; +#49959 = AXIS2_PLACEMENT_3D ( 'NONE', #39829, #46055, #27354 ) ; +#49960 = CIRCLE ( 'NONE', #71129, 10.50000000000009600 ) ; +#49961 = ORIENTED_EDGE ( 'NONE', *, *, #62398, .F. ) ; +#49962 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 21.66666666666668200, 2.794441961969992100 ) ) ; +#49963 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571421700, 87.92318720225442500, -28.70555803803047500 ) ) ; +#49964 = CONICAL_SURFACE ( 'NONE', #24581, 10.50000000000009400, 0.7853981633974482800 ) ; +#49965 = ORIENTED_EDGE ( 'NONE', *, *, #30600, .T. ) ; +#49966 = ORIENTED_EDGE ( 'NONE', *, *, #66094, .F. ) ; +#49967 = ORIENTED_EDGE ( 'NONE', *, *, #68927, .T. ) ; +#49968 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963500, 39.15930907398619400, -28.35186440610857500 ) ) ; +#49969 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 75.79999999999998300, -28.20555803802997700 ) ) ; +#49970 = AXIS2_PLACEMENT_3D ( 'NONE', #49766, #12549, #56046 ) ; +#49971 = CARTESIAN_POINT ( 'NONE', ( 2.677527484459420600, 9.342828874293905600, -28.51468825946483300 ) ) ; +#49972 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#49973 = EDGE_CURVE ( 'NONE', #43623, #36149, #44516, .T. ) ; +#49974 = EDGE_CURVE ( 'NONE', #74718, #21643, #21288, .T. ) ; +#49975 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 65.67652461701985100, -28.70555803803014400 ) ) ; +#49976 = EDGE_CURVE ( 'NONE', #47484, #23125, #79624, .T. ) ; +#49978 = FACE_OUTER_BOUND ( 'NONE', #79681, .T. ) ; +#49977 = AXIS2_PLACEMENT_3D ( 'NONE', #12907, #56382, #19134 ) ; +#49979 = CARTESIAN_POINT ( 'NONE', ( -6.852157730108388000E-014, 43.65857157145693900, -28.20555803802997700 ) ) ; +#49980 = VERTEX_POINT ( 'NONE', #46904 ) ; +#49981 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999957400, 81.61077422949634300, -28.37255355648661500 ) ) ; +#49982 = FACE_OUTER_BOUND ( 'NONE', #52024, .T. ) ; +#49983 = AXIS2_PLACEMENT_3D ( 'NONE', #20799, #64347, #27069 ) ; +#49984 = EDGE_LOOP ( 'NONE', ( #36001, #78778, #61016 ) ) ; +#49985 = ORIENTED_EDGE ( 'NONE', *, *, #19512, .F. ) ; +#49986 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819702700, 81.65075715145306400, -28.20555803803014100 ) ) ; +#49987 = ORIENTED_EDGE ( 'NONE', *, *, #76305, .F. ) ; +#49988 = AXIS2_PLACEMENT_3D ( 'NONE', #47669, #16699, #4180 ) ; +#49989 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109117600, 60.49763722318498800, -28.32100408376067000 ) ) ; +#49990 = ORIENTED_EDGE ( 'NONE', *, *, #2079, .F. ) ; +#49991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49992 = EDGE_CURVE ( 'NONE', #63152, #3423, #11497, .T. ) ; +#49993 = PLANE ( 'NONE', #86 ) ; +#49994 = CIRCLE ( 'NONE', #65359, 10.00000000000009200 ) ; +#49995 = AXIS2_PLACEMENT_3D ( 'NONE', #23527, #67048, #29827 ) ; +#49996 = AXIS2_PLACEMENT_3D ( 'NONE', #24239, #67763, #30518 ) ; +#49997 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#49999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50000 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48250, #17564, #36311, #79842 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871341914200E-007, 0.0002930369617398778900 ), + .UNSPECIFIED. ) ; +#50001 = ADVANCED_FACE ( 'NONE', ( #68908 ), #73777, .T. ) ; +#50002 = ORIENTED_EDGE ( 'NONE', *, *, #79532, .F. ) ; +#50003 = ORIENTED_EDGE ( 'NONE', *, *, #74688, .T. ) ; +#50004 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50005 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999996400, 58.62623792124938400, -28.70555803802997700 ) ) ; +#50006 = ORIENTED_EDGE ( 'NONE', *, *, #67627, .F. ) ; +#50007 = CIRCLE ( 'NONE', #21098, 10.50000000000009600 ) ; +#50008 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 65.79999999999999700, -28.20555803802997700 ) ) ; +#50009 = ADVANCED_FACE ( 'NONE', ( #75688 ), #40948, .T. ) ; +#50010 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 65.33333333333334300, -3.705558038030004400 ) ) ; +#50011 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 30.33333333333333600, -5.205558038030008400 ) ) ; +#50012 = AXIS2_PLACEMENT_3D ( 'NONE', #32037, #75535, #38246 ) ; +#50013 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.66749699759768800, -28.20555803802994200 ) ) ; +#50014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50015 = FACE_OUTER_BOUND ( 'NONE', #1840, .T. ) ; +#50016 = ADVANCED_FACE ( 'NONE', ( #9517 ), #9943, .T. ) ; +#50017 = ADVANCED_FACE ( 'NONE', ( #59151 ), #7545, .F. ) ; +#50018 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 67.66666666666665700, 8.320721403598824400 ) ) ; +#50019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38020, #75312, #25287, #761 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957487769700, 0.004414112765716390000 ), + .UNSPECIFIED. ) ; +#50020 = ORIENTED_EDGE ( 'NONE', *, *, #13186, .F. ) ; +#50021 = AXIS2_PLACEMENT_3D ( 'NONE', #35541, #72790, #41748 ) ; +#50022 = ORIENTED_EDGE ( 'NONE', *, *, #65157, .T. ) ; +#50023 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911123700, 61.19833471562197500, -28.28704243186601300 ) ) ; +#50024 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488151300, 69.60439022488344600, -28.70555803803014400 ) ) ; +#50025 = VERTEX_POINT ( 'NONE', #53721 ) ; +#50026 = ADVANCED_FACE ( 'NONE', ( #24135 ), #55247, .T. ) ; +#50027 = EDGE_CURVE ( 'NONE', #26934, #39390, #71826, .T. ) ; +#50028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50029 = ORIENTED_EDGE ( 'NONE', *, *, #66505, .T. ) ; +#50030 = CONICAL_SURFACE ( 'NONE', #71616, 10.50000000000009600, 0.7853981633974500600 ) ; +#50031 = AXIS2_PLACEMENT_3D ( 'NONE', #23952, #11709, #36427 ) ; +#50032 = ORIENTED_EDGE ( 'NONE', *, *, #39228, .T. ) ; +#50033 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#50034 = VERTEX_POINT ( 'NONE', #22729 ) ; +#50035 = FACE_OUTER_BOUND ( 'NONE', #38701, .T. ) ; +#50036 = CARTESIAN_POINT ( 'NONE', ( 9.254548258615010100, 39.09617684379259100, -28.64146614751469900 ) ) ; +#50037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50038 = FACE_OUTER_BOUND ( 'NONE', #49829, .T. ) ; +#50039 = ORIENTED_EDGE ( 'NONE', *, *, #6978, .T. ) ; +#50040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50041 = ORIENTED_EDGE ( 'NONE', *, *, #79125, .F. ) ; +#50042 = CARTESIAN_POINT ( 'NONE', ( 10.24306493325792100, 51.43482203710616600, -28.29548531138987900 ) ) ; +#50043 = ORIENTED_EDGE ( 'NONE', *, *, #30731, .F. ) ; +#50044 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305610900, 69.70395328581611200, -28.70555803802999500 ) ) ; +#50045 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865852800, 39.41272737910568900, -28.28853693900642000 ) ) ; +#50046 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#50047 = FACE_OUTER_BOUND ( 'NONE', #9897, .T. ) ; +#50048 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372566000, 33.16464174796073600, -28.53896444442200300 ) ) ; +#50049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50050 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655694400, 38.92298334620754500, -28.20555803802996000 ) ) ; +#50051 = ORIENTED_EDGE ( 'NONE', *, *, #46898, .F. ) ; +#50052 = FACE_OUTER_BOUND ( 'NONE', #31452, .T. ) ; +#50053 = EDGE_CURVE ( 'NONE', #60899, #42646, #57207, .T. ) ; +#50054 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 30.94069092601377900, -28.35186440610858600 ) ) ; +#50055 = ORIENTED_EDGE ( 'NONE', *, *, #30958, .T. ) ; +#50056 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50057 = PLANE ( 'NONE', #31560 ) ; +#50058 = ORIENTED_EDGE ( 'NONE', *, *, #6881, .T. ) ; +#50060 = EDGE_CURVE ( 'NONE', #33956, #36988, #6817, .T. ) ; +#50059 = ORIENTED_EDGE ( 'NONE', *, *, #61932, .F. ) ; +#50061 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344327800, 20.67701665379242500, -28.20555803802994200 ) ) ; +#50062 = ORIENTED_EDGE ( 'NONE', *, *, #43782, .T. ) ; +#50063 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506468300, 49.58087956867527900, -28.30223257055580500 ) ) ; +#50064 = ORIENTED_EDGE ( 'NONE', *, *, #18049, .T. ) ; +#50065 = CONICAL_SURFACE ( 'NONE', #19936, 10.50000000000009600, 0.7853981633974500600 ) ; +#50066 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50068 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230974700, 19.81139552890386900, -28.53900456328625200 ) ) ; +#50069 = ORIENTED_EDGE ( 'NONE', *, *, #47465, .T. ) ; +#50070 = EDGE_LOOP ( 'NONE', ( #47820, #19315, #28088, #17936 ) ) ; +#50071 = CARTESIAN_POINT ( 'NONE', ( 11.03592035693668200, 10.09789380924836900, -28.25343951603380800 ) ) ; +#50072 = EDGE_CURVE ( 'NONE', #69301, #31022, #73169, .T. ) ; +#50073 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#50074 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71188, #27690, #33921, #77440 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283326915000, 0.0007287255810272726800 ), + .UNSPECIFIED. ) ; +#50075 = EDGE_CURVE ( 'NONE', #65938, #45917, #58673, .T. ) ; +#50076 = ORIENTED_EDGE ( 'NONE', *, *, #2804, .F. ) ; +#50077 = ORIENTED_EDGE ( 'NONE', *, *, #58801, .F. ) ; +#50078 = EDGE_CURVE ( 'NONE', #79164, #43963, #44167, .T. ) ; +#50079 = EDGE_LOOP ( 'NONE', ( #4727, #57628, #54472 ) ) ; +#50080 = CIRCLE ( 'NONE', #50714, 9.500000000000095900 ) ; +#50081 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 36.33333333333334300, 5.722645192245503900 ) ) ; +#50082 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701300, 14.98096581827321200, -28.69431509262337300 ) ) ; +#50083 = AXIS2_PLACEMENT_3D ( 'NONE', #7374, #38374, #50878 ) ; +#50084 = EDGE_CURVE ( 'NONE', #42918, #27378, #26097, .T. ) ; +#50085 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50086 = EDGE_CURVE ( 'NONE', #63652, #53788, #40655, .T. ) ; +#50087 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#50088 = EDGE_CURVE ( 'NONE', #67246, #4338, #42600, .T. ) ; +#50089 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#50090 = ADVANCED_FACE ( 'NONE', ( #31929 ), #20221, .F. ) ; +#50091 = AXIS2_PLACEMENT_3D ( 'NONE', #27176, #51862, #70663 ) ; +#50092 = CIRCLE ( 'NONE', #5860, 10.00000000000009600 ) ; +#50093 = CARTESIAN_POINT ( 'NONE', ( 4.118935526109027900, 60.49763722318521500, -28.32100408376091100 ) ) ; +#50094 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50095 = EDGE_CURVE ( 'NONE', #52219, #12637, #36746, .T. ) ; +#50096 = ORIENTED_EDGE ( 'NONE', *, *, #44953, .F. ) ; +#50097 = FACE_OUTER_BOUND ( 'NONE', #15256, .T. ) ; +#50098 = ADVANCED_FACE ( 'NONE', ( #5626 ), #54787, .F. ) ; +#50099 = AXIS2_PLACEMENT_3D ( 'NONE', #56047, #43520, #6026 ) ; +#50100 = AXIS2_PLACEMENT_3D ( 'NONE', #63285, #50968, #13780 ) ; +#50101 = VERTEX_POINT ( 'NONE', #11569 ) ; +#50102 = CARTESIAN_POINT ( 'NONE', ( -17.40875264640682100, 30.67947987789649700, -28.41157636893867900 ) ) ; +#50103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50104 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#50105 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999989900, 80.79999999999968500, -28.20555803803030800 ) ) ; +#50106 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 63.67681279774499400, -28.70555803802997700 ) ) ; +#50107 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 7.666666666666681200, -6.705558038030000400 ) ) ; +#50108 = CONICAL_SURFACE ( 'NONE', #25001, 10.00000000000009400, 0.7853981633974447300 ) ; +#50109 = FACE_OUTER_BOUND ( 'NONE', #11718, .T. ) ; +#50110 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356200, 80.79999999999968500, -28.55171188418412200 ) ) ; +#50111 = EDGE_LOOP ( 'NONE', ( #14091, #27168, #25468, #69527 ) ) ; +#50112 = ADVANCED_FACE ( 'NONE', ( #53307 ), #23806, .T. ) ; +#50113 = CIRCLE ( 'NONE', #63074, 10.50000000000009600 ) ; +#50114 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42034, #4519, #66814, #4773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.006877718201233491400, 0.007639752840043687900 ), + .UNSPECIFIED. ) ; +#50115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50116 = EDGE_LOOP ( 'NONE', ( #1579, #54991, #76331, #54305 ) ) ; +#50117 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528132700, 20.46868088498121800, -28.51286550264510200 ) ) ; +#50118 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50119 = EDGE_LOOP ( 'NONE', ( #21915, #26729, #72824, #51566 ) ) ; +#50120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50121 = CARTESIAN_POINT ( 'NONE', ( 5.727308459283273500, 65.79999999999968500, -28.53979898350193200 ) ) ; +#50122 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007436100, 17.31967837323415100, -28.55467576046954300 ) ) ; +#50123 = FACE_OUTER_BOUND ( 'NONE', #14210, .T. ) ; +#50124 = ADVANCED_FACE ( 'NONE', ( #38674 ), #48773, .T. ) ; +#50125 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#50127 = CIRCLE ( 'NONE', #68496, 10.00000000000009200 ) ; +#50126 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999100, 17.63176086632761000, -28.70555803803025800 ) ) ; +#50128 = AXIS2_PLACEMENT_3D ( 'NONE', #30965, #74486, #37178 ) ; +#50129 = ORIENTED_EDGE ( 'NONE', *, *, #37455, .T. ) ; +#50130 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50131 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 42.16666666666666400, -2.545304000185620600 ) ) ; +#50132 = ORIENTED_EDGE ( 'NONE', *, *, #74665, .T. ) ; +#50133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50134 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50135 = EDGE_CURVE ( 'NONE', #25223, #40126, #22178, .T. ) ; +#50136 = ORIENTED_EDGE ( 'NONE', *, *, #70975, .T. ) ; +#50137 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 69.91070809551060000, -28.20555803802997700 ) ) ; +#50138 = ORIENTED_EDGE ( 'NONE', *, *, #48891, .T. ) ; +#50139 = AXIS2_PLACEMENT_3D ( 'NONE', #2218, #33249, #39490 ) ; +#50140 = ORIENTED_EDGE ( 'NONE', *, *, #52700, .T. ) ; +#50141 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378067200, 90.82516071402385200, -28.57108397021908900 ) ) ; +#50142 = ORIENTED_EDGE ( 'NONE', *, *, #44805, .T. ) ; +#50143 = CARTESIAN_POINT ( 'NONE', ( 24.99999999997578100, 101.5999999999644100, -19.56036112515203100 ) ) ; +#50144 = ADVANCED_FACE ( 'NONE', ( #3654 ), #65970, .F. ) ; +#50145 = CIRCLE ( 'NONE', #11463, 10.50000000000009600 ) ; +#50146 = CARTESIAN_POINT ( 'NONE', ( 16.44673298324186200, 90.11613117245549600, -28.57420149389581400 ) ) ; +#50147 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 90.13716795162659400, -28.48697406221667400 ) ) ; +#50148 = AXIS2_PLACEMENT_3D ( 'NONE', #60943, #48384, #79691 ) ; +#50150 = ORIENTED_EDGE ( 'NONE', *, *, #46738, .F. ) ; +#50149 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 40.30000000000008200, -28.70555803802995200 ) ) ; +#50151 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309802100, 75.79999999999999700, -28.70555803802997700 ) ) ; +#50152 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 38.41684396980716800, -28.70555803802998400 ) ) ; +#50153 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50154 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 80.40166528437781300, -28.28704243186578500 ) ) ; +#50155 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 10.18929190448943500, -28.20555803802994200 ) ) ; +#50156 = FACE_OUTER_BOUND ( 'NONE', #13132, .T. ) ; +#50157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50158 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#50159 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000004300, 71.36762008758023500, -28.26633708900912000 ) ) ; +#50160 = AXIS2_PLACEMENT_3D ( 'NONE', #48272, #54560, #4772 ) ; +#50161 = ORIENTED_EDGE ( 'NONE', *, *, #11817, .F. ) ; +#50162 = FACE_OUTER_BOUND ( 'NONE', #6085, .T. ) ; +#50163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50164 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725219500, 13.73212903577577400, -28.37244029424772800 ) ) ; +#50165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50166 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732797300, 51.93585231025883800, -28.38420446581271200 ) ) ; +#50167 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 14.05000000000000400, -28.20555803802992800 ) ) ; +#50168 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -49.81214711292819400, 16.29444196196997700 ) ) ; +#50169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50170 = CARTESIAN_POINT ( 'NONE', ( 2.487410011450816000, 80.12140959735981500, -28.55996453402235600 ) ) ; +#50171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58636, #15122, #71145, #33888 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786120117100E-007, 0.0007677775503743773400 ), + .UNSPECIFIED. ) ; +#50174 = EDGE_CURVE ( 'NONE', #46932, #35530, #18273, .T. ) ; +#50175 = FACE_OUTER_BOUND ( 'NONE', #32772, .T. ) ; +#50176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#50177 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 48.50000000000000000, 6.847000845227646500 ) ) ; +#50178 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12421, #49627, #24922, #68431 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397512300, 0.001517194977238176800 ), + .UNSPECIFIED. ) ; +#50179 = EDGE_CURVE ( 'NONE', #28207, #66847, #29806, .T. ) ; +#50180 = CIRCLE ( 'NONE', #62409, 9.500000000000131500 ) ; +#50181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50182 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55131, #61430, #80169, #42884 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572445753200E-007, 0.0004669842289003662600 ), + .UNSPECIFIED. ) ; +#50183 = ORIENTED_EDGE ( 'NONE', *, *, #62224, .F. ) ; +#50184 = CIRCLE ( 'NONE', #62962, 10.50000000000009200 ) ; +#50185 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 13.66666666666667500, -5.535685056952199400 ) ) ; +#50186 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50187 = EDGE_CURVE ( 'NONE', #16582, #44641, #34841, .T. ) ; +#50188 = ORIENTED_EDGE ( 'NONE', *, *, #71847, .F. ) ; +#50189 = CARTESIAN_POINT ( 'NONE', ( 11.56194429656799900, 39.11613305479827600, -28.57723854182874500 ) ) ; +#50190 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 71.96823913367204300, -28.70555803802997700 ) ) ; +#50191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52389, #8879, #64975, #27698 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081983421000E-007, 0.001076191670834635700 ), + .UNSPECIFIED. ) ; +#50193 = CIRCLE ( 'NONE', #58818, 9.500000000000099500 ) ; +#50194 = CIRCLE ( 'NONE', #47511, 10.00000000000009200 ) ; +#50195 = EDGE_CURVE ( 'NONE', #9694, #61123, #15299, .T. ) ; +#50196 = ORIENTED_EDGE ( 'NONE', *, *, #69786, .T. ) ; +#50197 = EDGE_CURVE ( 'NONE', #5570, #60591, #51309, .T. ) ; +#50198 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905800, 54.83849307182666200, -28.68631150211663400 ) ) ; +#50199 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 16.00000000000000400, 9.794441961969996100 ) ) ; +#50200 = ORIENTED_EDGE ( 'NONE', *, *, #69275, .T. ) ; +#50201 = ORIENTED_EDGE ( 'NONE', *, *, #5313, .T. ) ; +#50202 = AXIS2_PLACEMENT_3D ( 'NONE', #17391, #42108, #67162 ) ; +#50203 = EDGE_CURVE ( 'NONE', #6017, #23406, #69848, .T. ) ; +#50204 = EDGE_CURVE ( 'NONE', #18312, #34956, #67915, .T. ) ; +#50205 = EDGE_CURVE ( 'NONE', #20495, #58752, #809, .T. ) ; +#50206 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#50207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50208 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042474100, 27.50972971738995900, -28.70555803802993500 ) ) ; +#50209 = PLANE ( 'NONE', #10826 ) ; +#50210 = CIRCLE ( 'NONE', #31464, 10.00000000000009200 ) ; +#50211 = ORIENTED_EDGE ( 'NONE', *, *, #52854, .F. ) ; +#50212 = AXIS2_PLACEMENT_3D ( 'NONE', #49119, #36633, #55399 ) ; +#50213 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#50214 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#50215 = ORIENTED_EDGE ( 'NONE', *, *, #49872, .T. ) ; +#50216 = ADVANCED_FACE ( 'NONE', ( #1693 ), #30926, .T. ) ; +#50217 = ORIENTED_EDGE ( 'NONE', *, *, #43079, .T. ) ; +#50218 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555667400, 51.87833896172670500, -28.53892303408230200 ) ) ; +#50219 = ORIENTED_EDGE ( 'NONE', *, *, #11173, .T. ) ; +#50220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50221 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#50222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50223 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#50224 = ADVANCED_FACE ( 'NONE', ( #64026 ), #78630, .T. ) ; +#50225 = CIRCLE ( 'NONE', #21919, 10.00000000000009600 ) ; +#50226 = FACE_OUTER_BOUND ( 'NONE', #26757, .T. ) ; +#50227 = AXIS2_PLACEMENT_3D ( 'NONE', #73651, #17627, #42611 ) ; +#50228 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 30.72294471194860000, -28.20555803802996700 ) ) ; +#50229 = AXIS2_PLACEMENT_3D ( 'NONE', #75153, #609, #31646 ) ; +#50230 = ORIENTED_EDGE ( 'NONE', *, *, #28271, .T. ) ; +#50231 = AXIS2_PLACEMENT_3D ( 'NONE', #21104, #27083, #64620 ) ; +#50232 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36575, #73876, #30366, #80112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.709724693207104400E-017, 0.001246264537621124900 ), + .UNSPECIFIED. ) ; +#50233 = ADVANCED_FACE ( 'NONE', ( #80552 ), #45448, .T. ) ; +#50234 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #6739 ) ; +#50235 = CARTESIAN_POINT ( 'NONE', ( 3.778842085587717400, 20.43523632220588100, -28.30315276798564700 ) ) ; +#50236 = CARTESIAN_POINT ( 'NONE', ( -16.76916930534303400, 80.65007990305429100, -28.43638873268705000 ) ) ; +#50237 = CONICAL_SURFACE ( 'NONE', #48682, 10.00000000000009200, 0.7853981633974447300 ) ; +#50238 = VERTEX_POINT ( 'NONE', #31659 ) ; +#50239 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50240 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 19.50000000000000400, -7.061964498581016200 ) ) ; +#50241 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120825900, 28.88098890548150200, -28.33427604305564200 ) ) ; +#50242 = EDGE_LOOP ( 'NONE', ( #69542, #3640, #15473 ) ) ; +#50243 = CONICAL_SURFACE ( 'NONE', #74118, 10.00000000000009200, 0.7853981633974447300 ) ; +#50244 = CONICAL_SURFACE ( 'NONE', #36603, 10.50000000000009400, 0.7853981633974500600 ) ; +#50245 = CARTESIAN_POINT ( 'NONE', ( 15.24268566510272600, 9.878657167448636800, -28.70261278770272600 ) ) ; +#50246 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345618200, 60.07527064970105400, -28.39317435246128000 ) ) ; +#50247 = AXIS2_PLACEMENT_3D ( 'NONE', #61184, #23923, #67418 ) ; +#50248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50249 = EDGE_CURVE ( 'NONE', #76859, #36273, #67164, .T. ) ; +#50250 = ORIENTED_EDGE ( 'NONE', *, *, #61062, .T. ) ; +#50251 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034400, 18.15930907398619400, -28.35186440610855000 ) ) ; +#50252 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#50253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50254 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124969800, 65.13282980700498100, -28.53914313452756700 ) ) ; +#50255 = CIRCLE ( 'NONE', #6802, 10.00000000000009200 ) ; +#50256 = EDGE_LOOP ( 'NONE', ( #78375, #57023, #75841 ) ) ; +#50257 = EDGE_CURVE ( 'NONE', #36910, #60567, #52676, .T. ) ; +#50258 = FACE_OUTER_BOUND ( 'NONE', #72187, .T. ) ; +#50259 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#50260 = AXIS2_PLACEMENT_3D ( 'NONE', #17049, #60569, #23290 ) ; +#50261 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#50262 = CARTESIAN_POINT ( 'NONE', ( -9.487410011450967000, 80.12140959736000000, -28.55996453402213600 ) ) ; +#50263 = EDGE_LOOP ( 'NONE', ( #70765, #11766, #8556, #49951 ) ) ; +#50264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50265 = LINE ( 'NONE', #68196, #64923 ) ; +#50266 = CARTESIAN_POINT ( 'NONE', ( -1.116254736416749200, 45.54999999999998300, -28.53994725305377100 ) ) ; +#50268 = ORIENTED_EDGE ( 'NONE', *, *, #38622, .F. ) ; +#50267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50269 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#50270 = CIRCLE ( 'NONE', #75978, 10.00000000000009200 ) ; +#50271 = AXIS2_PLACEMENT_3D ( 'NONE', #22748, #66284, #29055 ) ; +#50272 = FACE_OUTER_BOUND ( 'NONE', #5894, .T. ) ; +#50273 = VERTEX_POINT ( 'NONE', #621 ) ; +#50274 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#50275 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182100, 28.63131911501876900, -28.51286550264508100 ) ) ; +#50276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50277 = ORIENTED_EDGE ( 'NONE', *, *, #53195, .F. ) ; +#50278 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 63.16666666666667900, 0.1341879241256129200 ) ) ; +#50279 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50280 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548954100, 9.940690926013790100, -28.35186440610860700 ) ) ; +#50281 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 28.16666666666668600, 0.9380355014189834000 ) ) ; +#50282 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78333, #34823, #10051, #53566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446488987300E-007, 0.0002745498510224190000 ), + .UNSPECIFIED. ) ; +#50283 = CIRCLE ( 'NONE', #29356, 10.50000000000009600 ) ; +#50284 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174760100, 60.16054007504465100, -28.34042301926881200 ) ) ; +#50285 = VERTEX_POINT ( 'NONE', #42958 ) ; +#50286 = EDGE_CURVE ( 'NONE', #37899, #77818, #38206, .T. ) ; +#50287 = VERTEX_POINT ( 'NONE', #67735 ) ; +#50288 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305488700, 41.89604671418358400, -28.70555803803001600 ) ) ; +#50289 = ORIENTED_EDGE ( 'NONE', *, *, #32066, .T. ) ; +#50290 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 65.50000000000000000, -9.258116921287651700 ) ) ; +#50291 = VERTEX_POINT ( 'NONE', #75919 ) ; +#50292 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567000, 51.46283204837339300, -28.48697406221667400 ) ) ; +#50293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50294 = FACE_OUTER_BOUND ( 'NONE', #34895, .T. ) ; +#50295 = ORIENTED_EDGE ( 'NONE', *, *, #53313, .T. ) ; +#50296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40135, #8827, #46351, #9104 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524562735000E-007, 0.0007303749718166469000 ), + .UNSPECIFIED. ) ; +#50297 = ORIENTED_EDGE ( 'NONE', *, *, #13794, .T. ) ; +#50298 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 63.67681279774499400, -28.70555803802997700 ) ) ; +#50299 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#50300 = ADVANCED_FACE ( 'NONE', ( #49371 ), #12431, .T. ) ; +#50301 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#50302 = CARTESIAN_POINT ( 'NONE', ( -15.32631446541102900, 12.90457788868500600, -28.70132697598340600 ) ) ; +#50303 = FACE_OUTER_BOUND ( 'NONE', #70583, .T. ) ; +#50304 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#50305 = ORIENTED_EDGE ( 'NONE', *, *, #68949, .F. ) ; +#50306 = EDGE_CURVE ( 'NONE', #45369, #42265, #29020, .T. ) ; +#50308 = EDGE_CURVE ( 'NONE', #53681, #6581, #23784, .T. ) ; +#50307 = ORIENTED_EDGE ( 'NONE', *, *, #11167, .F. ) ; +#50309 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534571600, 19.60079448659599800, -28.70555803802994200 ) ) ; +#50310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50311 = VERTEX_POINT ( 'NONE', #43234 ) ; +#50312 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922505300, 71.50962196508494600, -28.29483400905893800 ) ) ; +#50313 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50314 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#50315 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50316 = FACE_OUTER_BOUND ( 'NONE', #73511, .T. ) ; +#50317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50318 = ADVANCED_FACE ( 'NONE', ( #47417 ), #43524, .F. ) ; +#50319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50320 = CARTESIAN_POINT ( 'NONE', ( -3.221259145455643400, 39.16476764525110400, -28.30311733712047200 ) ) ; +#50321 = AXIS2_PLACEMENT_3D ( 'NONE', #38877, #76168, #14175 ) ; +#50322 = EDGE_CURVE ( 'NONE', #5658, #73936, #60127, .T. ) ; +#50323 = EDGE_CURVE ( 'NONE', #39642, #80010, #9284, .T. ) ; +#50325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9115, #46360, #2328, #52641 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146363053800, 0.0007987676590766469100 ), + .UNSPECIFIED. ) ; +#50324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50326 = ORIENTED_EDGE ( 'NONE', *, *, #62994, .F. ) ; +#50327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50328 = EDGE_CURVE ( 'NONE', #59892, #49395, #76633, .T. ) ; +#50329 = AXIS2_PLACEMENT_3D ( 'NONE', #13744, #57233, #19989 ) ; +#50330 = FACE_OUTER_BOUND ( 'NONE', #34041, .T. ) ; +#50331 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873544100, 43.17955320215945400, -28.64059091698903400 ) ) ; +#50332 = ORIENTED_EDGE ( 'NONE', *, *, #12779, .T. ) ; +#50333 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50334 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658370400, 61.44848545218980000, -28.67627428870429500 ) ) ; +#50335 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.03751622186548100, -28.32723995587591800 ) ) ; +#50336 = CONICAL_SURFACE ( 'NONE', #9693, 10.50000000000009600, 0.7853981633974500600 ) ; +#50337 = AXIS2_PLACEMENT_3D ( 'NONE', #78701, #41397, #4152 ) ; +#50338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50339 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280409400, 73.65857157145700300, -28.37229765499284500 ) ) ; +#50340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50341 = EDGE_LOOP ( 'NONE', ( #30762, #72396, #58536, #20282 ) ) ; +#50342 = ADVANCED_FACE ( 'NONE', ( #16335 ), #58146, .T. ) ; +#50343 = FACE_OUTER_BOUND ( 'NONE', #65590, .T. ) ; +#50344 = ORIENTED_EDGE ( 'NONE', *, *, #66804, .T. ) ; +#50345 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826524700, 49.45051138331400200, -28.33414295261581400 ) ) ; +#50346 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 34.16666666666669300, -9.205558038030003900 ) ) ; +#50347 = VERTEX_POINT ( 'NONE', #62556 ) ; +#50348 = CARTESIAN_POINT ( 'NONE', ( 15.86238361814060500, 49.42067263347055900, -28.67075088557349400 ) ) ; +#50349 = AXIS2_PLACEMENT_3D ( 'NONE', #35136, #22599, #22331 ) ; +#50350 = EDGE_CURVE ( 'NONE', #60581, #28740, #74708, .T. ) ; +#50351 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 80.90033558196088800, -28.70555803803014400 ) ) ; +#50352 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35947, #73227, #4936, #48423 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907013536900E-007, 0.0006651184466337326300 ), + .UNSPECIFIED. ) ; +#50353 = CONICAL_SURFACE ( 'NONE', #46749, 10.50000000000009900, 0.7853981633974518300 ) ; +#50354 = FACE_OUTER_BOUND ( 'NONE', #36054, .T. ) ; +#50355 = ORIENTED_EDGE ( 'NONE', *, *, #5661, .T. ) ; +#50356 = VERTEX_POINT ( 'NONE', #19014 ) ; +#50357 = EDGE_LOOP ( 'NONE', ( #77907, #59149, #22129, #18638, #27211, #61891, #43663, #19657 ) ) ; +#50358 = EDGE_CURVE ( 'NONE', #12178, #14357, #10473, .T. ) ; +#50359 = ORIENTED_EDGE ( 'NONE', *, *, #56937, .T. ) ; +#50360 = AXIS2_PLACEMENT_3D ( 'NONE', #34222, #77729, #40462 ) ; +#50361 = EDGE_LOOP ( 'NONE', ( #23329, #29263, #66566, #44789 ) ) ; +#50362 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252837800, 9.968680884981202100, -28.51286550264501000 ) ) ; +#50363 = EDGE_LOOP ( 'NONE', ( #49967, #28353, #26313 ) ) ; +#50364 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.93250300240229200, -28.20555803802996700 ) ) ; +#50365 = CARTESIAN_POINT ( 'NONE', ( -17.38231690878857800, 49.39503779644465500, -28.41840204704135400 ) ) ; +#50366 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 23.37738371066728900, -28.70555803802995200 ) ) ; +#50367 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 5.499999999999999100, 6.847000845227641200 ) ) ; +#50368 = CIRCLE ( 'NONE', #65292, 10.50000000000009600 ) ; +#50369 = AXIS2_PLACEMENT_3D ( 'NONE', #53665, #16418, #59949 ) ; +#50370 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#50371 = ORIENTED_EDGE ( 'NONE', *, *, #65727, .F. ) ; +#50372 = EDGE_LOOP ( 'NONE', ( #23765, #44175, #50659 ) ) ; +#50373 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239400, 42.02620220503713000, -28.70555803802996700 ) ) ; +#50374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50375 = CARTESIAN_POINT ( 'NONE', ( 17.19805182908467200, 5.603893946865586200, -27.68744794323797700 ) ) ; +#50376 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 12.39610994602603500, -28.37519436813180100 ) ) ; +#50378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50377 = CIRCLE ( 'NONE', #59988, 10.00000000000009600 ) ; +#50379 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#50380 = AXIS2_PLACEMENT_3D ( 'NONE', #10420, #53916, #16670 ) ; +#50381 = CARTESIAN_POINT ( 'NONE', ( -2.769169305343231800, 90.65007990305416300, -28.43638873268701400 ) ) ; +#50382 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72297, #28804, #41250, #3991 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962719443000, 0.0008252574424211178900 ), + .UNSPECIFIED. ) ; +#50383 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 80.24722181384567000, -28.70555803802999500 ) ) ; +#50384 = EDGE_LOOP ( 'NONE', ( #25923, #11105, #27977 ) ) ; +#50385 = ADVANCED_FACE ( 'NONE', ( #62072 ), #72761, .T. ) ; +#50386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50387 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#50388 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188004200, 20.06914835874664500, -28.45573375118225100 ) ) ; +#50389 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 40.00000000000000000, -1.205558038030002800 ) ) ; +#50390 = CIRCLE ( 'NONE', #20280, 10.50000000000009600 ) ; +#50391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50392 = ORIENTED_EDGE ( 'NONE', *, *, #39517, .F. ) ; +#50393 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609170600, 80.13716795162640900, -28.48697406221692000 ) ) ; +#50394 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 69.97246552159113300, -28.38801640354855100 ) ) ; +#50395 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12527, #24761, #18768, #62301 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318561609900, 0.001296017758338048400 ), + .UNSPECIFIED. ) ; +#50396 = ORIENTED_EDGE ( 'NONE', *, *, #74474, .T. ) ; +#50397 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#50398 = VERTEX_POINT ( 'NONE', #75325 ) ; +#50399 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#50400 = CARTESIAN_POINT ( 'NONE', ( 19.61559317442669200, 100.8311863488535600, -22.59264721291799200 ) ) ; +#50401 = ADVANCED_FACE ( 'NONE', ( #25062 ), #39648, .F. ) ; +#50402 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#50403 = CARTESIAN_POINT ( 'NONE', ( -17.23693278408308400, 39.78642716943459600, -28.45216716783122700 ) ) ; +#50404 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205787000, 81.51754275546335300, -28.27504145778831600 ) ) ; +#50405 = CARTESIAN_POINT ( 'NONE', ( 11.62630871739487000, 92.65850107289561800, -28.66333578723706700 ) ) ; +#50406 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040276600, 53.65857157145704500, -28.37229765499282100 ) ) ; +#50407 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#50408 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, 79.63176086632761000, -28.70555803803030800 ) ) ; +#50409 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390823700, 34.41466791010179100, -28.53910738522651200 ) ) ; +#50410 = CARTESIAN_POINT ( 'NONE', ( 3.756937565509128600, 51.43482212736777400, -28.29548618595833500 ) ) ; +#50411 = CARTESIAN_POINT ( 'NONE', ( -3.031778038947720700, 80.28233213024645900, -28.25051428653852500 ) ) ; +#50412 = CONICAL_SURFACE ( 'NONE', #35407, 10.00000000000009200, 0.7853981633974447300 ) ; +#50413 = ADVANCED_FACE ( 'NONE', ( #8474 ), #6556, .T. ) ; +#50414 = ADVANCED_FACE ( 'NONE', ( #56184 ), #54235, .T. ) ; +#50415 = EDGE_CURVE ( 'NONE', #47181, #11959, #75614, .T. ) ; +#50416 = VERTEX_POINT ( 'NONE', #38296 ) ; +#50417 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50418 = VERTEX_POINT ( 'NONE', #63092 ) ; +#50419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50421 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972665300, 62.22511094383838800, -28.55192314908421700 ) ) ; +#50422 = ADVANCED_FACE ( 'NONE', ( #27027 ), #70781, .T. ) ; +#50423 = LINE ( 'NONE', #2073, #72887 ) ; +#50424 = EDGE_CURVE ( 'NONE', #7608, #206, #61190, .T. ) ; +#50425 = FACE_OUTER_BOUND ( 'NONE', #3551, .T. ) ; +#50426 = ORIENTED_EDGE ( 'NONE', *, *, #27249, .T. ) ; +#50427 = AXIS2_PLACEMENT_3D ( 'NONE', #6245, #49714, #12515 ) ; +#50428 = VERTEX_POINT ( 'NONE', #57102 ) ; +#50429 = ORIENTED_EDGE ( 'NONE', *, *, #43853, .T. ) ; +#50430 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 46.33333333333334300, -6.705558038030005700 ) ) ; +#50431 = CIRCLE ( 'NONE', #31453, 10.00000000000009200 ) ; +#50432 = EDGE_LOOP ( 'NONE', ( #67523, #15297, #43199 ) ) ; +#50433 = ORIENTED_EDGE ( 'NONE', *, *, #9137, .F. ) ; +#50434 = EDGE_LOOP ( 'NONE', ( #19074, #32149, #7569 ) ) ; +#50435 = VERTEX_POINT ( 'NONE', #1319 ) ; +#50437 = EDGE_LOOP ( 'NONE', ( #30236, #33325, #7491 ) ) ; +#50436 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50438 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 11.50000000000000500, 2.454695999814385600 ) ) ; +#50439 = ORIENTED_EDGE ( 'NONE', *, *, #31803, .T. ) ; +#50440 = AXIS2_PLACEMENT_3D ( 'NONE', #79240, #41948, #4688 ) ; +#50441 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50442 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875015100, 76.46717019299478600, -28.53914313452737500 ) ) ; +#50443 = EDGE_CURVE ( 'NONE', #12492, #27143, #41598, .T. ) ; +#50444 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59210, #15706, #28255, #71747 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.504625015047567300E-016, 0.001871986839426616500 ), + .UNSPECIFIED. ) ; +#50445 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000700, 101.5999999999999900, -1.205558038030003500 ) ) ; +#50446 = EDGE_CURVE ( 'NONE', #29328, #13573, #14367, .T. ) ; +#50447 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50448 = AXIS2_PLACEMENT_3D ( 'NONE', #28324, #71801, #34547 ) ; +#50449 = EDGE_LOOP ( 'NONE', ( #43832, #78717, #51158, #17711 ) ) ; +#50450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50451 = CONICAL_SURFACE ( 'NONE', #19862, 10.50000000000009600, 0.7853981633974500600 ) ; +#50452 = ORIENTED_EDGE ( 'NONE', *, *, #14482, .T. ) ; +#50453 = ORIENTED_EDGE ( 'NONE', *, *, #39610, .F. ) ; +#50454 = ORIENTED_EDGE ( 'NONE', *, *, #13435, .T. ) ; +#50455 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#50456 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877843500, 30.52667319908792400, -28.37233769390154600 ) ) ; +#50457 = ORIENTED_EDGE ( 'NONE', *, *, #74566, .F. ) ; +#50458 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 13.83333333333333700, -12.20555803803000600 ) ) ; +#50459 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#50460 = EDGE_LOOP ( 'NONE', ( #60348, #34042, #22785, #17622 ) ) ; +#50461 = AXIS2_PLACEMENT_3D ( 'NONE', #57355, #38830, #76110 ) ; +#50462 = FACE_OUTER_BOUND ( 'NONE', #34280, .T. ) ; +#50463 = EDGE_CURVE ( 'NONE', #8074, #62498, #46674, .T. ) ; +#50464 = AXIS2_PLACEMENT_3D ( 'NONE', #26870, #8062, #39065 ) ; +#50465 = AXIS2_PLACEMENT_3D ( 'NONE', #28770, #47172, #53469 ) ; +#50466 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123095700, 50.28860447109612200, -28.53900456328627700 ) ) ; +#50467 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655525700, 20.67701665379217200, -28.20555803802994500 ) ) ; +#50469 = VERTEX_POINT ( 'NONE', #44795 ) ; +#50468 = CARTESIAN_POINT ( 'NONE', ( -17.04026895850642400, 30.87561462481246700, -28.30309985153376200 ) ) ; +#50470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#50471 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 47.44142842854307000, -28.20555803802996700 ) ) ; +#50472 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#50473 = CARTESIAN_POINT ( 'NONE', ( 16.24682844054300900, 94.09365688108601900, -28.38965197393400100 ) ) ; +#50474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50475 = FACE_OUTER_BOUND ( 'NONE', #63240, .T. ) ; +#50476 = VERTEX_POINT ( 'NONE', #57623 ) ; +#50477 = AXIS2_PLACEMENT_3D ( 'NONE', #28125, #71613, #34355 ) ; +#50478 = CARTESIAN_POINT ( 'NONE', ( -19.97416284789112600, 0.05125150193978780800, -19.87624974289994000 ) ) ; +#50479 = ORIENTED_EDGE ( 'NONE', *, *, #25329, .F. ) ; +#50480 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 61.43945992495518000, -28.34042301926901400 ) ) ; +#50481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50483 = ORIENTED_EDGE ( 'NONE', *, *, #66109, .T. ) ; +#50482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67925, #55663, #80703, #43410 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794219278000E-007, 0.0009376791149930118200 ), + .UNSPECIFIED. ) ; +#50486 = ADVANCED_FACE ( 'NONE', ( #32853 ), #35758, .F. ) ; +#50487 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#50488 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#50489 = AXIS2_PLACEMENT_3D ( 'NONE', #68480, #31234, #74736 ) ; +#50490 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50491 = CIRCLE ( 'NONE', #27536, 9.500000000000099500 ) ; +#50492 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 17.33333333333333900, 5.722645192245503900 ) ) ; +#50493 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50494 = FACE_OUTER_BOUND ( 'NONE', #44663, .T. ) ; +#50495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38864, #45098, #7874, #51356 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859940172900E-007, 0.0008759659331885342900 ), + .UNSPECIFIED. ) ; +#50496 = ORIENTED_EDGE ( 'NONE', *, *, #6503, .F. ) ; +#50497 = ORIENTED_EDGE ( 'NONE', *, *, #23301, .T. ) ; +#50498 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274710100, 24.55000000000000100, -28.20555803802994200 ) ) ; +#50499 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#50500 = ADVANCED_FACE ( 'NONE', ( #68844 ), #2629, .F. ) ; +#50501 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181928500, 59.94924284854760500, -28.20555803803014400 ) ) ; +#50502 = AXIS2_PLACEMENT_3D ( 'NONE', #7622, #13916, #32401 ) ; +#50504 = ORIENTED_EDGE ( 'NONE', *, *, #62618, .F. ) ; +#50503 = CARTESIAN_POINT ( 'NONE', ( 17.40093558791441100, 51.69271233864078900, -28.41359472476250400 ) ) ; +#50505 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305485900, 69.70395328581638200, -28.70555803803002000 ) ) ; +#50506 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#50507 = EDGE_CURVE ( 'NONE', #77746, #24196, #19203, .T. ) ; +#50508 = FACE_OUTER_BOUND ( 'NONE', #73856, .T. ) ; +#50509 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999949400, 49.13176086632792300, -28.70555803802996700 ) ) ; +#50510 = ORIENTED_EDGE ( 'NONE', *, *, #47118, .T. ) ; +#50511 = CIRCLE ( 'NONE', #61503, 10.00000000000009400 ) ; +#50512 = ORIENTED_EDGE ( 'NONE', *, *, #58197, .F. ) ; +#50513 = VERTEX_POINT ( 'NONE', #45342 ) ; +#50514 = AXIS2_PLACEMENT_3D ( 'NONE', #77342, #40066, #2790 ) ; +#50515 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995000, 31.46823913367205300, -28.70555803802996700 ) ) ; +#50516 = ORIENTED_EDGE ( 'NONE', *, *, #71819, .F. ) ; +#50517 = ADVANCED_FACE ( 'NONE', ( #21175 ), #33796, .T. ) ; +#50518 = CONICAL_SURFACE ( 'NONE', #15232, 10.50000000000009600, 0.7853981633974500600 ) ; +#50519 = VERTEX_POINT ( 'NONE', #33146 ) ; +#50520 = ORIENTED_EDGE ( 'NONE', *, *, #39376, .F. ) ; +#50521 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 20.43250300240229200, -28.23966044827353300 ) ) ; +#50522 = ORIENTED_EDGE ( 'NONE', *, *, #61357, .F. ) ; +#50523 = VERTEX_POINT ( 'NONE', #2115 ) ; +#50524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50525 = VERTEX_POINT ( 'NONE', #45609 ) ; +#50526 = ORIENTED_EDGE ( 'NONE', *, *, #61833, .T. ) ; +#50527 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428600900, 41.52858243452104900, -28.70555803802997700 ) ) ; +#50528 = ORIENTED_EDGE ( 'NONE', *, *, #10450, .F. ) ; +#50529 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189000, 49.23827450271716800, -28.47230003642277300 ) ) ; +#50530 = VERTEX_POINT ( 'NONE', #76647 ) ; +#50531 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54344, #17109, #73142, #35864 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008962668203135514100, 0.001537179614978365000 ), + .UNSPECIFIED. ) ; +#50533 = ADVANCED_FACE ( 'NONE', ( #50303 ), #695, .F. ) ; +#50534 = FACE_OUTER_BOUND ( 'NONE', #75357, .T. ) ; +#50535 = ORIENTED_EDGE ( 'NONE', *, *, #8637, .T. ) ; +#50537 = EDGE_CURVE ( 'NONE', #53551, #17804, #32251, .T. ) ; +#50536 = ORIENTED_EDGE ( 'NONE', *, *, #31288, .T. ) ; +#50538 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#50539 = VERTEX_POINT ( 'NONE', #76927 ) ; +#50540 = VERTEX_POINT ( 'NONE', #39665 ) ; +#50541 = EDGE_CURVE ( 'NONE', #74558, #39653, #17260, .T. ) ; +#50542 = CONICAL_SURFACE ( 'NONE', #69703, 10.00000000000009200, 0.7853981633974447300 ) ; +#50543 = ADVANCED_FACE ( 'NONE', ( #23130 ), #31862, .T. ) ; +#50544 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 61.00000000000001400, -1.205558038030002800 ) ) ; +#50545 = VERTEX_POINT ( 'NONE', #27456 ) ; +#50546 = EDGE_CURVE ( 'NONE', #25749, #35675, #48368, .T. ) ; +#50547 = ORIENTED_EDGE ( 'NONE', *, *, #9720, .T. ) ; +#50548 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23128, #29416, #72891, #35635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#50549 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736720600, 14.05000000000000200, -28.70555803802992800 ) ) ; +#50550 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 26.00000000000001400, -1.205558038030005300 ) ) ; +#50551 = EDGE_CURVE ( 'NONE', #70514, #2762, #17798, .T. ) ; +#50552 = AXIS2_PLACEMENT_3D ( 'NONE', #13713, #19946, #7405 ) ; +#50553 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471848200, 41.46868088498121800, -28.51286550264512700 ) ) ; +#50554 = CONICAL_SURFACE ( 'NONE', #29611, 10.50000000000009400, 0.7853981633974500600 ) ; +#50555 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .T. ) ; +#50556 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 90.07141756547891000, -28.70555803802997700 ) ) ; +#50557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50558 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 63.33333333333333600, 4.294441961970000500 ) ) ; +#50559 = EDGE_LOOP ( 'NONE', ( #25547, #42662, #7549 ) ) ; +#50560 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 80.36203212531316400, -28.38801640354855800 ) ) ; +#50561 = AXIS2_PLACEMENT_3D ( 'NONE', #59393, #65663, #15866 ) ; +#50562 = EDGE_CURVE ( 'NONE', #64564, #47662, #3298, .T. ) ; +#50563 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50564 = EDGE_CURVE ( 'NONE', #27173, #23429, #69625, .T. ) ; +#50565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50566 = EDGE_CURVE ( 'NONE', #44558, #60268, #55169, .T. ) ; +#50567 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50568 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819702700, 81.65075715145306400, -28.20555803803014100 ) ) ; +#50569 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#50570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#50571 = AXIS2_PLACEMENT_3D ( 'NONE', #24051, #67555, #30333 ) ; +#50572 = CIRCLE ( 'NONE', #30285, 9.500000000000099500 ) ; +#50573 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50575 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344080000, 38.92298334620767300, -28.20555803802995200 ) ) ; +#50576 = CIRCLE ( 'NONE', #78044, 10.00000000000009200 ) ; +#50577 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312782400, 55.80000000000534000, -28.70555803803014400 ) ) ; +#50578 = EDGE_LOOP ( 'NONE', ( #50059, #10749, #25286, #45828, #24011 ) ) ; +#50579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41102, #78394, #10108, #53619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.127570259384924600E-017, 0.002676326193402298200 ), + .UNSPECIFIED. ) ; +#50580 = CARTESIAN_POINT ( 'NONE', ( 4.720904428264121900, 51.50050415885226600, -28.63287458792257600 ) ) ; +#50581 = CARTESIAN_POINT ( 'NONE', ( -2.963744891818757700, 89.94924284854707300, -28.20555803803005900 ) ) ; +#50582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50583 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 26.10073525436786600, -28.70555803802994200 ) ) ; +#50584 = EDGE_CURVE ( 'NONE', #44921, #64739, #40703, .T. ) ; +#50585 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#50586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#50587 = AXIS2_PLACEMENT_3D ( 'NONE', #49118, #5639, #24415 ) ; +#50588 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432843700, 18.35339758437810400, -28.20555803802992800 ) ) ; +#50589 = AXIS2_PLACEMENT_3D ( 'NONE', #9686, #53187, #15944 ) ; +#50590 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709896500, 18.06267502090533800, -28.41043597897452600 ) ) ; +#50591 = CIRCLE ( 'NONE', #52342, 9.500000000000099500 ) ; +#50592 = CARTESIAN_POINT ( 'NONE', ( 16.45764012468375600, 76.42426956854048100, -28.60339038649759400 ) ) ; +#50593 = ORIENTED_EDGE ( 'NONE', *, *, #16420, .F. ) ; +#50594 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50596 = ORIENTED_EDGE ( 'NONE', *, *, #40994, .F. ) ; +#50597 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 66.83333333333334300, -9.205558038030003900 ) ) ; +#50598 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 51.43250300240198000, -28.20555803803047800 ) ) ; +#50599 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50600 = CIRCLE ( 'NONE', #26686, 10.50000000000009600 ) ; +#50601 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725658600, 57.93535825203924400, -28.53896444442201400 ) ) ; +#50602 = ORIENTED_EDGE ( 'NONE', *, *, #9249, .F. ) ; +#50603 = ORIENTED_EDGE ( 'NONE', *, *, #75854, .F. ) ; +#50605 = VERTEX_POINT ( 'NONE', #34221 ) ; +#50604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50606 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#50607 = EDGE_LOOP ( 'NONE', ( #64360, #53322, #33395 ) ) ; +#50608 = ORIENTED_EDGE ( 'NONE', *, *, #54291, .F. ) ; +#50609 = ORIENTED_EDGE ( 'NONE', *, *, #5559, .T. ) ; +#50610 = ORIENTED_EDGE ( 'NONE', *, *, #32947, .F. ) ; +#50611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50612 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50613 = AXIS2_PLACEMENT_3D ( 'NONE', #36596, #11873, #42854 ) ; +#50614 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50615 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50616 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567900, 73.66464174796075800, -28.53896444442199600 ) ) ; +#50617 = AXIS2_PLACEMENT_3D ( 'NONE', #10342, #53850, #16600 ) ; +#50618 = EDGE_LOOP ( 'NONE', ( #53659, #2469, #381 ) ) ; +#50619 = CONICAL_SURFACE ( 'NONE', #16650, 10.00000000000009200, 0.7853981633974447300 ) ; +#50620 = ORIENTED_EDGE ( 'NONE', *, *, #15446, .F. ) ; +#50621 = VERTEX_POINT ( 'NONE', #46692 ) ; +#50622 = ORIENTED_EDGE ( 'NONE', *, *, #24986, .F. ) ; +#50623 = ADVANCED_FACE ( 'NONE', ( #52258 ), #63005, .T. ) ; +#50624 = EDGE_CURVE ( 'NONE', #79164, #25396, #26296, .T. ) ; +#50625 = ORIENTED_EDGE ( 'NONE', *, *, #27989, .T. ) ; +#50626 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.79722425778844300, -28.32715733700493400 ) ) ; +#50627 = ORIENTED_EDGE ( 'NONE', *, *, #34306, .T. ) ; +#50628 = ORIENTED_EDGE ( 'NONE', *, *, #68301, .F. ) ; +#50629 = ADVANCED_FACE ( 'NONE', ( #79545 ), #29951, .F. ) ; +#50630 = FACE_OUTER_BOUND ( 'NONE', #60242, .T. ) ; +#50631 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 32.00000000000000700, 6.794441961969995200 ) ) ; +#50632 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671990100, 81.93585231025934900, -28.38420446581283600 ) ) ; +#50633 = AXIS2_PLACEMENT_3D ( 'NONE', #70263, #33018, #76518 ) ; +#50634 = ORIENTED_EDGE ( 'NONE', *, *, #32602, .T. ) ; +#50635 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195757200, 53.65857157145708800, -28.37229765499300200 ) ) ; +#50636 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944368800, 28.30044153222984700, -28.38339015421984600 ) ) ; +#50637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78363, #34850, #16349, #59875 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184998900, 0.001517199873936112000 ), + .UNSPECIFIED. ) ; +#50638 = ADVANCED_FACE ( 'NONE', ( #15303 ), #77583, .T. ) ; +#50639 = AXIS2_PLACEMENT_3D ( 'NONE', #26171, #69654, #32408 ) ; +#50640 = CIRCLE ( 'NONE', #55056, 10.00000000000009200 ) ; +#50642 = EDGE_LOOP ( 'NONE', ( #21421, #1452, #32698, #3493 ) ) ; +#50641 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50643 = ORIENTED_EDGE ( 'NONE', *, *, #11878, .F. ) ; +#50644 = CARTESIAN_POINT ( 'NONE', ( -11.00202449666889500, 18.28907889423218700, -28.25433304472391400 ) ) ; +#50645 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459536600, 79.08026449164330500, -28.70555803803006300 ) ) ; +#50646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50647 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 22.89610994602603400, -28.37519436813181200 ) ) ; +#50648 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 3.333333333333343700, -10.73183747965883100 ) ) ; +#50649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50651 = EDGE_CURVE ( 'NONE', #31068, #58778, #11821, .T. ) ; +#50652 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853335100, 41.79130857014964600, -28.37223374938519500 ) ) ; +#50653 = EDGE_CURVE ( 'NONE', #49071, #7051, #78115, .T. ) ; +#50654 = ORIENTED_EDGE ( 'NONE', *, *, #60834, .F. ) ; +#50655 = EDGE_LOOP ( 'NONE', ( #56983, #40356, #17708, #50739 ) ) ; +#50656 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865854900, 28.91272737910569300, -28.28853693900641300 ) ) ; +#50657 = CARTESIAN_POINT ( 'NONE', ( 18.69274757716900500, 2.614499303464708400, -25.44758714530328400 ) ) ; +#50658 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999999600, 71.43250300240228500, -28.20555803802997700 ) ) ; +#50659 = ORIENTED_EDGE ( 'NONE', *, *, #43207, .T. ) ; +#50660 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#50661 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#50662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50663 = EDGE_CURVE ( 'NONE', #67158, #55231, #63673, .T. ) ; +#50664 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50665 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719590900, 15.94142842854242100, -28.37229765499324300 ) ) ; +#50666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50667 = FACE_OUTER_BOUND ( 'NONE', #43951, .T. ) ; +#50668 = EDGE_LOOP ( 'NONE', ( #21410, #10629, #46345 ) ) ; +#50669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50670 = EDGE_LOOP ( 'NONE', ( #44196, #60333, #58281 ) ) ; +#50671 = EDGE_CURVE ( 'NONE', #60567, #66678, #49163, .T. ) ; +#50672 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 37.83333333333334300, 0.1341879241256075400 ) ) ; +#50673 = EDGE_CURVE ( 'NONE', #60477, #27561, #34755, .T. ) ; +#50674 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615328200, 60.80000000000004000, -28.55171188418384500 ) ) ; +#50675 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50676 = ORIENTED_EDGE ( 'NONE', *, *, #23071, .F. ) ; +#50677 = FACE_OUTER_BOUND ( 'NONE', #40822, .T. ) ; +#50678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50679 = EDGE_LOOP ( 'NONE', ( #41907, #14626, #33780, #78770, #31294, #69067, #51771, #77525 ) ) ; +#50680 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#50681 = ORIENTED_EDGE ( 'NONE', *, *, #25465, .F. ) ; +#50682 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13440, #50644, #19687, #63204 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780710615300E-007, 0.0002745453538439289400 ), + .UNSPECIFIED. ) ; +#50683 = ORIENTED_EDGE ( 'NONE', *, *, #44214, .F. ) ; +#50684 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50685 = ORIENTED_EDGE ( 'NONE', *, *, #68807, .T. ) ; +#50686 = CARTESIAN_POINT ( 'NONE', ( 21.99787462947255200, 95.09893731473776800, -25.87172956347562200 ) ) ; +#50687 = CARTESIAN_POINT ( 'NONE', ( 3.871312284980190600, 7.471333297324520100, -28.40074127503917700 ) ) ; +#50688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50689 = AXIS2_PLACEMENT_3D ( 'NONE', #27062, #76806, #64339 ) ; +#50690 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#50691 = CIRCLE ( 'NONE', #46298, 10.50000000000009900 ) ; +#50692 = EDGE_CURVE ( 'NONE', #27463, #64857, #20276, .T. ) ; +#50693 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537171500, 60.34267608797603800, -28.20555803802997700 ) ) ; +#50694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47086, #22371, #3852, #47349 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694492241200E-007, 0.0008724363063896224200 ), + .UNSPECIFIED. ) ; +#50695 = EDGE_CURVE ( 'NONE', #54460, #12876, #64976, .T. ) ; +#50696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50697 = EDGE_CURVE ( 'NONE', #71952, #74753, #66907, .T. ) ; +#50698 = CARTESIAN_POINT ( 'NONE', ( 16.87499050669567800, 51.09368568082187800, -28.32746852027555900 ) ) ; +#50699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50700 = CONICAL_SURFACE ( 'NONE', #17133, 10.00000000000009200, 0.7853981633974447300 ) ; +#50701 = AXIS2_PLACEMENT_3D ( 'NONE', #61405, #67629, #42583 ) ; +#50702 = ORIENTED_EDGE ( 'NONE', *, *, #22007, .T. ) ; +#50703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50704 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769047900, 39.78860447109614300, -28.53900456328627300 ) ) ; +#50705 = ORIENTED_EDGE ( 'NONE', *, *, #10776, .F. ) ; +#50706 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102700, 19.29999999999999000, -28.45034744217088000 ) ) ; +#50707 = ORIENTED_EDGE ( 'NONE', *, *, #43668, .F. ) ; +#50708 = ORIENTED_EDGE ( 'NONE', *, *, #14467, .T. ) ; +#50709 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50710 = VERTEX_POINT ( 'NONE', #16808 ) ; +#50711 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174618900, 81.43945992495534400, -28.34042301926885800 ) ) ; +#50712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50713 = CIRCLE ( 'NONE', #10750, 10.50000000000009900 ) ; +#50714 = AXIS2_PLACEMENT_3D ( 'NONE', #45999, #8739, #52253 ) ; +#50715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#50716 = AXIS2_PLACEMENT_3D ( 'NONE', #28264, #78276, #65772 ) ; +#50717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50718 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50719 = AXIS2_PLACEMENT_3D ( 'NONE', #43594, #6357, #49841 ) ; +#50720 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 26.44142842854297000, -28.20555803802994200 ) ) ; +#50721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50722 = FACE_OUTER_BOUND ( 'NONE', #11324, .T. ) ; +#50723 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 44.16666666666668600, 1.741883078712356500 ) ) ; +#50724 = ORIENTED_EDGE ( 'NONE', *, *, #63517, .T. ) ; +#50725 = ADVANCED_FACE ( 'NONE', ( #46398 ), #75617, .F. ) ; +#50726 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 9.333333333333346400, -3.705558038030004400 ) ) ; +#50727 = AXIS2_PLACEMENT_3D ( 'NONE', #3094, #9348, #40360 ) ; +#50728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50730 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#50731 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#50733 = EDGE_CURVE ( 'NONE', #26791, #7846, #11422, .T. ) ; +#50732 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41146, #16135, #10149, #53651 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0002670038068533322800 ), + .UNSPECIFIED. ) ; +#50734 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449975400, 79.83662311806182300, -28.37223523914888900 ) ) ; +#50735 = VERTEX_POINT ( 'NONE', #4549 ) ; +#50736 = ORIENTED_EDGE ( 'NONE', *, *, #49976, .F. ) ; +#50737 = AXIS2_PLACEMENT_3D ( 'NONE', #13932, #51123, #1394 ) ; +#50738 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50739 = ORIENTED_EDGE ( 'NONE', *, *, #4089, .F. ) ; +#50740 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7290, #50795, #26110, #69589 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838145321056700E-007, 0.0004559721418119531500 ), + .UNSPECIFIED. ) ; +#50741 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50743 = CARTESIAN_POINT ( 'NONE', ( 11.28317650709959400, 18.06267502090538500, -28.41043597897513400 ) ) ; +#50744 = ADVANCED_FACE ( 'NONE', ( #27984 ), #26025, .T. ) ; +#50745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50747 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71274, #46471, #71542, #34285 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574878233300E-007, 0.0007596410370205578700 ), + .UNSPECIFIED. ) ; +#50748 = FACE_OUTER_BOUND ( 'NONE', #63396, .T. ) ; +#50749 = EDGE_LOOP ( 'NONE', ( #73005, #20827, #79899, #61359 ) ) ; +#50750 = AXIS2_PLACEMENT_3D ( 'NONE', #64945, #27673, #71164 ) ; +#50751 = ORIENTED_EDGE ( 'NONE', *, *, #44579, .F. ) ; +#50752 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 91.59999999999999400, -28.70555803803001300 ) ) ; +#50753 = CONICAL_SURFACE ( 'NONE', #64111, 10.50000000000009600, 0.7853981633974500600 ) ; +#50754 = ORIENTED_EDGE ( 'NONE', *, *, #76683, .F. ) ; +#50755 = CARTESIAN_POINT ( 'NONE', ( -19.11803408372251700, 1.763317461152564600, -24.38543155074305000 ) ) ; +#50756 = EDGE_LOOP ( 'NONE', ( #16336, #70640, #30241 ) ) ; +#50757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50758 = ORIENTED_EDGE ( 'NONE', *, *, #1841, .T. ) ; +#50759 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385209100, 38.99322649091141800, -28.30799595738880800 ) ) ; +#50760 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007441400, 31.78032162676584700, -28.55467576046957800 ) ) ; +#50761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50762 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079816900, 61.43383669612077800, -28.27375072930982500 ) ) ; +#50763 = AXIS2_PLACEMENT_3D ( 'NONE', #14765, #58546, #46003 ) ; +#50764 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10469, #47686, #16719, #60247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634771593700E-007, 0.0008082706238602624300 ), + .UNSPECIFIED. ) ; +#50765 = CIRCLE ( 'NONE', #55144, 10.00000000000009200 ) ; +#50766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50767 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890733500, 39.47143078992715500, -28.37063977681167200 ) ) ; +#50768 = ORIENTED_EDGE ( 'NONE', *, *, #41525, .T. ) ; +#50769 = FACE_OUTER_BOUND ( 'NONE', #41651, .T. ) ; +#50770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50771 = EDGE_CURVE ( 'NONE', #14221, #50416, #5819, .T. ) ; +#50772 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 15.16666666666667300, -9.205558038030003900 ) ) ; +#50773 = ORIENTED_EDGE ( 'NONE', *, *, #25003, .T. ) ; +#50774 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492458800, 19.89456479767169800, -28.70555803802994200 ) ) ; +#50775 = ORIENTED_EDGE ( 'NONE', *, *, #2195, .F. ) ; +#50776 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .T. ) ; +#50777 = CIRCLE ( 'NONE', #55423, 10.50000000000009600 ) ; +#50778 = ORIENTED_EDGE ( 'NONE', *, *, #46671, .T. ) ; +#50779 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#50780 = CIRCLE ( 'NONE', #23747, 10.50000000000009800 ) ; +#50781 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50782 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899348000, 20.97636006919909900, -28.38670679782166300 ) ) ; +#50783 = CARTESIAN_POINT ( 'NONE', ( -3.040273598549589000, 39.22437813624630100, -28.30310527599300100 ) ) ; +#50784 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36093, #73356, #5064, #48550 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01412728837592747000, 0.01489823379111372500 ), + .UNSPECIFIED. ) ; +#50785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50786 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 59.63176086632792300, -28.70555803802997700 ) ) ; +#50787 = CARTESIAN_POINT ( 'NONE', ( -15.78330646519587600, 80.79999999999999700, -28.32841359973439700 ) ) ; +#50788 = EDGE_CURVE ( 'NONE', #44976, #4437, #72156, .T. ) ; +#50789 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50790 = EDGE_CURVE ( 'NONE', #7646, #55672, #57657, .T. ) ; +#50791 = CIRCLE ( 'NONE', #78456, 10.00000000000009200 ) ; +#50792 = EDGE_LOOP ( 'NONE', ( #22238, #44520, #78478, #38397 ) ) ; +#50793 = CARTESIAN_POINT ( 'NONE', ( -11.54774122007436600, 27.81967837323414700, -28.55467576046955400 ) ) ; +#50794 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511848700, 51.99560977511661300, -28.70555803802997700 ) ) ; +#50795 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654565000, 81.32559822014181300, -28.29986836858018500 ) ) ; +#50796 = AXIS2_PLACEMENT_3D ( 'NONE', #42800, #5561, #49037 ) ; +#50797 = EDGE_CURVE ( 'NONE', #23277, #46777, #37673, .T. ) ; +#50798 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#50799 = EDGE_CURVE ( 'NONE', #24052, #66775, #43182, .T. ) ; +#50800 = EDGE_CURVE ( 'NONE', #61057, #14733, #13375, .T. ) ; +#50801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50802 = ADVANCED_FACE ( 'NONE', ( #59082 ), #40574, .F. ) ; +#50803 = EDGE_CURVE ( 'NONE', #70191, #33342, #28800, .T. ) ; +#50804 = AXIS2_PLACEMENT_3D ( 'NONE', #10614, #54108, #16871 ) ; +#50805 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007620300, 42.28032162676823400, -28.55467576047087900 ) ) ; +#50806 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ; +#50807 = CARTESIAN_POINT ( 'NONE', ( 16.62514415533964400, 9.187427922330183300, -28.57261973208896000 ) ) ; +#50808 = EDGE_LOOP ( 'NONE', ( #72487, #68981, #55641, #47105 ) ) ; +#50809 = ADVANCED_FACE ( 'NONE', ( #44440 ), #30411, .T. ) ; +#50810 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 58.83333333333335000, -2.545304000185615800 ) ) ; +#50811 = AXIS2_PLACEMENT_3D ( 'NONE', #17640, #61167, #23898 ) ; +#50812 = AXIS2_PLACEMENT_3D ( 'NONE', #72327, #47507, #10289 ) ; +#50813 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 9.746602415621548900, -28.20555803803025800 ) ) ; +#50814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50815 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290102800, 39.06267502090533100, -28.41043597897454000 ) ) ; +#50816 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 23.83333333333333600, -3.349151577478984600 ) ) ; +#50817 = CONICAL_SURFACE ( 'NONE', #63737, 10.00000000000009400, 0.7853981633974447300 ) ; +#50818 = EDGE_LOOP ( 'NONE', ( #77977, #8550, #61494 ) ) ; +#50819 = FACE_OUTER_BOUND ( 'NONE', #70518, .T. ) ; +#50820 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#50821 = ORIENTED_EDGE ( 'NONE', *, *, #49107, .T. ) ; +#50822 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#50823 = ADVANCED_FACE ( 'NONE', ( #57138 ), #71753, .F. ) ; +#50824 = EDGE_LOOP ( 'NONE', ( #53639, #41648, #26677 ) ) ; +#50825 = LINE ( 'NONE', #47853, #1217 ) ; +#50826 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 61.16666666666668600, -4.152999154772358800 ) ) ; +#50827 = ORIENTED_EDGE ( 'NONE', *, *, #62369, .T. ) ; +#50828 = ORIENTED_EDGE ( 'NONE', *, *, #24362, .T. ) ; +#50829 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 80.37705528805136600, -28.20555803802997700 ) ) ; +#50830 = AXIS2_PLACEMENT_3D ( 'NONE', #26449, #51109, #69919 ) ; +#50831 = EDGE_CURVE ( 'NONE', #63152, #31837, #14297, .T. ) ; +#50832 = CIRCLE ( 'NONE', #47266, 10.00000000000009600 ) ; +#50833 = ADVANCED_FACE ( 'NONE', ( #9435 ), #38600, .T. ) ; +#50834 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25768, #43937, #38229, #975 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577276900 ), + .UNSPECIFIED. ) ; +#50835 = CARTESIAN_POINT ( 'NONE', ( 2.497924978448558400, 50.60145251508603800, -28.70555803802997700 ) ) ; +#50836 = VERTEX_POINT ( 'NONE', #43138 ) ; +#50837 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#50838 = CONICAL_SURFACE ( 'NONE', #22254, 10.50000000000009200, 0.7853981633974482800 ) ; +#50839 = ORIENTED_EDGE ( 'NONE', *, *, #6089, .F. ) ; +#50840 = CARTESIAN_POINT ( 'NONE', ( -17.06616028005483800, 42.50593028296453500, -28.49013149708291700 ) ) ; +#50841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50842 = EDGE_CURVE ( 'NONE', #39296, #55704, #55173, .T. ) ; +#50843 = CARTESIAN_POINT ( 'NONE', ( 16.99797853026625200, 49.78907435382946300, -28.25433648786268700 ) ) ; +#50844 = EDGE_LOOP ( 'NONE', ( #48061, #36483, #58505, #38432, #9192, #66287 ) ) ; +#50845 = CARTESIAN_POINT ( 'NONE', ( -5.685965509778305300, 35.04999999999997600, -28.37321477197629300 ) ) ; +#50846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50847 = AXIS2_PLACEMENT_3D ( 'NONE', #78727, #16967, #35476 ) ; +#50848 = ORIENTED_EDGE ( 'NONE', *, *, #3272, .F. ) ; +#50849 = CARTESIAN_POINT ( 'NONE', ( 3.346383312680324200, 8.297294629097113000, -28.56190306242184800 ) ) ; +#50850 = CIRCLE ( 'NONE', #72619, 10.00000000000009400 ) ; +#50851 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 67.94142842854307700, -28.20555803802997700 ) ) ; +#50852 = ORIENTED_EDGE ( 'NONE', *, *, #66908, .F. ) ; +#50853 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428500, 12.17681279774500600, -28.70555803802994200 ) ) ; +#50854 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50855 = CIRCLE ( 'NONE', #75785, 9.500000000000097700 ) ; +#50856 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428500, 47.42318720225497200, -28.70555803802996700 ) ) ; +#50857 = ORIENTED_EDGE ( 'NONE', *, *, #48069, .T. ) ; +#50858 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#50859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #497, #31541, #56532, #19285 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574859695400E-007, 0.0007596410370209064400 ), + .UNSPECIFIED. ) ; +#50860 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -49.81214711292819400, 0.0000000000000000000 ) ) ; +#50861 = VERTEX_POINT ( 'NONE', #18400 ) ; +#50862 = ORIENTED_EDGE ( 'NONE', *, *, #53702, .F. ) ; +#50863 = CARTESIAN_POINT ( 'NONE', ( 17.14651939117039000, 79.08511947570718800, -28.47263588290810100 ) ) ; +#50864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50866 = AXIS2_PLACEMENT_3D ( 'NONE', #14096, #57607, #20352 ) ; +#50867 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 64.66666666666667100, 5.722645192245505700 ) ) ; +#50868 = FACE_OUTER_BOUND ( 'NONE', #413, .T. ) ; +#50869 = ORIENTED_EDGE ( 'NONE', *, *, #55478, .F. ) ; +#50870 = CIRCLE ( 'NONE', #14874, 9.500000000000097700 ) ; +#50871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18169, #48611, #24440, #67944 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728439030352800E-007, 0.0007763347809200208700 ), + .UNSPECIFIED. ) ; +#50872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50873 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484628100, 80.22161678501181800, -28.29547179040443800 ) ) ; +#50874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50876 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50877 = AXIS2_PLACEMENT_3D ( 'NONE', #73667, #30433, #73943 ) ; +#50878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50879 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540382500, 69.08026449164326300, -28.70555803803019800 ) ) ; +#50880 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65393, #59089, #15579, #28123, #71611, #34353 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409290000, 0.003857515824818579900 ), + .UNSPECIFIED. ) ; +#50881 = EDGE_CURVE ( 'NONE', #77259, #34228, #80599, .T. ) ; +#50882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50884 = EDGE_LOOP ( 'NONE', ( #13765, #21972, #66193, #73942 ) ) ; +#50885 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 29.83333333333334600, -9.205558038030003900 ) ) ; +#50886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50887 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#50888 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50889 = ADVANCED_FACE ( 'NONE', ( #42525 ), #69774, .T. ) ; +#50890 = CIRCLE ( 'NONE', #43319, 10.50000000000009600 ) ; +#50891 = VERTEX_POINT ( 'NONE', #12427 ) ; +#50892 = FACE_OUTER_BOUND ( 'NONE', #35474, .T. ) ; +#50893 = EDGE_CURVE ( 'NONE', #55343, #45862, #66160, .T. ) ; +#50894 = ORIENTED_EDGE ( 'NONE', *, *, #17451, .F. ) ; +#50895 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679528700, 51.08083798124332000, -28.45106778992437700 ) ) ; +#50896 = CIRCLE ( 'NONE', #42302, 9.500000000000097700 ) ; +#50897 = EDGE_CURVE ( 'NONE', #35044, #25412, #51638, .T. ) ; +#50898 = ORIENTED_EDGE ( 'NONE', *, *, #28486, .T. ) ; +#50899 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159369000, 40.19809558586062800, -28.70555803803001600 ) ) ; +#50900 = ORIENTED_EDGE ( 'NONE', *, *, #23596, .T. ) ; +#50901 = ADVANCED_FACE ( 'NONE', ( #5550 ), #36684, .T. ) ; +#50903 = VERTEX_POINT ( 'NONE', #18924 ) ; +#50902 = AXIS2_PLACEMENT_3D ( 'NONE', #5445, #48929, #11720 ) ; +#50904 = EDGE_CURVE ( 'NONE', #3701, #69179, #53226, .T. ) ; +#50905 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671686400, 79.66414768974017600, -28.38420446581312400 ) ) ; +#50906 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4673, #41935, #54440, #17200 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.570657605175019900E-017, 0.001043664170964704100 ), + .UNSPECIFIED. ) ; +#50907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50909 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 1.166666666666676300, 9.794441961969994300 ) ) ; +#50910 = FACE_OUTER_BOUND ( 'NONE', #53496, .T. ) ; +#50911 = EDGE_CURVE ( 'NONE', #65169, #29676, #37194, .T. ) ; +#50912 = VERTEX_POINT ( 'NONE', #56180 ) ; +#50913 = AXIS2_PLACEMENT_3D ( 'NONE', #660, #50949, #13759 ) ; +#50914 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 39.53085164125334900, -28.45573375118225500 ) ) ; +#50915 = CIRCLE ( 'NONE', #39387, 10.50000000000009600 ) ; +#50916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50917 = VERTEX_POINT ( 'NONE', #412 ) ; +#50918 = ADVANCED_FACE ( 'NONE', ( #24062 ), #51233, .F. ) ; +#50919 = ORIENTED_EDGE ( 'NONE', *, *, #35699, .F. ) ; +#50920 = VERTEX_POINT ( 'NONE', #68969 ) ; +#50921 = CARTESIAN_POINT ( 'NONE', ( 19.89665139156451800, 0.2067035990759927000, -21.05361551076766300 ) ) ; +#50922 = CARTESIAN_POINT ( 'NONE', ( -9.769188246343315300, 80.94994472024612300, -28.43636979168675100 ) ) ; +#50923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50924 = VERTEX_POINT ( 'NONE', #31728 ) ; +#50925 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708531400, 55.80000000000008200, -28.63843632546336300 ) ) ; +#50926 = FACE_OUTER_BOUND ( 'NONE', #15699, .T. ) ; +#50927 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527475900, 14.04999999999976600, -28.20555803803009500 ) ) ; +#50928 = AXIS2_PLACEMENT_3D ( 'NONE', #45579, #8336, #51842 ) ; +#50929 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963800, 84.37738371066720300, -28.70555803803047500 ) ) ; +#50930 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#50931 = EDGE_CURVE ( 'NONE', #51949, #14529, #22765, .T. ) ; +#50932 = EDGE_CURVE ( 'NONE', #20890, #67438, #8266, .T. ) ; +#50933 = ADVANCED_FACE ( 'NONE', ( #3576 ), #18196, .F. ) ; +#50934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50935 = ORIENTED_EDGE ( 'NONE', *, *, #71258, .T. ) ; +#50936 = AXIS2_PLACEMENT_3D ( 'NONE', #7163, #50666, #13470 ) ; +#50937 = ORIENTED_EDGE ( 'NONE', *, *, #56114, .T. ) ; +#50938 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 35.66666666666666400, -3.705558038030004400 ) ) ; +#50939 = CARTESIAN_POINT ( 'NONE', ( 4.578733230518933400, 92.13234779781920700, -28.70555803803001300 ) ) ; +#50940 = ORIENTED_EDGE ( 'NONE', *, *, #884, .F. ) ; +#50941 = FACE_OUTER_BOUND ( 'NONE', #20307, .T. ) ; +#50942 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50943 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#50944 = CARTESIAN_POINT ( 'NONE', ( -5.533180123657669600, 55.79999999999999700, -28.37307693585060900 ) ) ; +#50945 = EDGE_CURVE ( 'NONE', #80133, #4132, #74628, .T. ) ; +#50946 = CARTESIAN_POINT ( 'NONE', ( 17.39515713253135200, 93.99515713252300500, -28.48136328478222600 ) ) ; +#50947 = ADVANCED_FACE ( 'NONE', ( #20152 ), #65903, .F. ) ; +#50948 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 77.60073525436789100, -28.70555803802999500 ) ) ; +#50949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50950 = AXIS2_PLACEMENT_3D ( 'NONE', #80575, #24554, #74346 ) ; +#50951 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455702200, 61.52472935029884100, -28.39317435246158500 ) ) ; +#50952 = AXIS2_PLACEMENT_3D ( 'NONE', #22203, #65737, #28501 ) ; +#50953 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50954 = CARTESIAN_POINT ( 'NONE', ( 4.427738916792316500, 8.799999999999668500, -28.63329695482266100 ) ) ; +#50955 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999945800, 71.96823913367190100, -28.70555803803014400 ) ) ; +#50956 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#50958 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571390300, 73.67681279774493000, -28.70555803803047500 ) ) ; +#50959 = CIRCLE ( 'NONE', #20079, 10.50000000000009600 ) ; +#50960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63334, #19796, #26064, #69551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572924100, 0.0008043487657982741600 ), + .UNSPECIFIED. ) ; +#50962 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#50963 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.43250300240229200, -28.20555803802997700 ) ) ; +#50964 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 71.65075715145280800, -28.20555803802997700 ) ) ; +#50965 = ORIENTED_EDGE ( 'NONE', *, *, #14710, .T. ) ; +#50966 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#50967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50970 = ORIENTED_EDGE ( 'NONE', *, *, #56784, .F. ) ; +#50969 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50971 = FACE_OUTER_BOUND ( 'NONE', #30764, .T. ) ; +#50972 = AXIS2_PLACEMENT_3D ( 'NONE', #27579, #71067, #33815 ) ; +#50973 = ORIENTED_EDGE ( 'NONE', *, *, #13326, .F. ) ; +#50974 = CIRCLE ( 'NONE', #39299, 9.500000000000095900 ) ; +#50975 = ORIENTED_EDGE ( 'NONE', *, *, #68085, .T. ) ; +#50976 = ORIENTED_EDGE ( 'NONE', *, *, #33548, .F. ) ; +#50977 = CIRCLE ( 'NONE', #9425, 10.50000000000009200 ) ; +#50978 = CYLINDRICAL_SURFACE ( 'NONE', #76817, 5.000000000000000900 ) ; +#50979 = EDGE_LOOP ( 'NONE', ( #27917, #61791, #74843 ) ) ; +#50980 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192851400, 56.79999999999998300, -28.70555803802997700 ) ) ; +#50981 = ORIENTED_EDGE ( 'NONE', *, *, #80257, .F. ) ; +#50982 = ORIENTED_EDGE ( 'NONE', *, *, #64388, .T. ) ; +#50983 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 7.166666666666683800, 0.1341879241256129200 ) ) ; +#50984 = AXIS2_PLACEMENT_3D ( 'NONE', #10262, #72293, #22762 ) ; +#50985 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769039500, 30.31139552890385900, -28.53900456328626900 ) ) ; +#50986 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22659, #66183, #41661, #4409 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402675324091675800E-007, 0.0002930379123883493900 ), + .UNSPECIFIED. ) ; +#50987 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.63556610137281700, -28.54207364681940000 ) ) ; +#50988 = EDGE_CURVE ( 'NONE', #45253, #59592, #67841, .T. ) ; +#50989 = CONICAL_SURFACE ( 'NONE', #12272, 10.00000000000009200, 0.7853981633974447300 ) ; +#50990 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567000, 51.46283204837339300, -28.48697406221667400 ) ) ; +#50991 = ORIENTED_EDGE ( 'NONE', *, *, #63471, .T. ) ; +#50992 = FACE_OUTER_BOUND ( 'NONE', #18244, .T. ) ; +#50993 = AXIS2_PLACEMENT_3D ( 'NONE', #29789, #73277, #36012 ) ; +#50994 = ORIENTED_EDGE ( 'NONE', *, *, #5905, .F. ) ; +#50995 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312782400, 55.80000000000534000, -28.70555803803014400 ) ) ; +#50996 = ORIENTED_EDGE ( 'NONE', *, *, #35186, .F. ) ; +#50997 = ORIENTED_EDGE ( 'NONE', *, *, #80360, .F. ) ; +#50998 = ORIENTED_EDGE ( 'NONE', *, *, #75248, .F. ) ; +#50999 = EDGE_LOOP ( 'NONE', ( #74555, #56938, #68050, #53627 ) ) ; +#51000 = CIRCLE ( 'NONE', #76736, 9.500000000000097700 ) ; +#51001 = PLANE ( 'NONE', #76747 ) ; +#51002 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310635600, 71.49769010897038900, -28.61774594594309600 ) ) ; +#51003 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51004 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52755, #71537, #9504, #53014 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001246264537621179700 ), + .UNSPECIFIED. ) ; +#51005 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715067500, 39.27966528189954000, -28.30868034705250100 ) ) ; +#51006 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856404700, 53.67681279774490800, -28.70555803802997700 ) ) ; +#51007 = VERTEX_POINT ( 'NONE', #19748 ) ; +#51008 = EDGE_CURVE ( 'NONE', #38513, #44806, #61064, .T. ) ; +#51009 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079818000, 51.43383669612079200, -28.27375072930982100 ) ) ; +#51010 = ORIENTED_EDGE ( 'NONE', *, *, #59438, .T. ) ; +#51011 = ADVANCED_FACE ( 'NONE', ( #1626 ), #80487, .T. ) ; +#51012 = CONICAL_SURFACE ( 'NONE', #20022, 10.00000000000009200, 0.7853981633974447300 ) ; +#51013 = EDGE_CURVE ( 'NONE', #53826, #45798, #16256, .T. ) ; +#51014 = CARTESIAN_POINT ( 'NONE', ( -17.57978257246292100, 4.839854231955894400, -27.27294060452542400 ) ) ; +#51015 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51018 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 70.07141756547893900, -28.70555803802997700 ) ) ; +#51019 = ADVANCED_FACE ( 'NONE', ( #7483 ), #30855, .F. ) ; +#51020 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#51021 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#51022 = EDGE_CURVE ( 'NONE', #19850, #23738, #47341, .T. ) ; +#51023 = ADVANCED_FACE ( 'NONE', ( #49297 ), #62000, .F. ) ; +#51024 = EDGE_CURVE ( 'NONE', #16633, #75366, #60175, .T. ) ; +#51025 = AXIS2_PLACEMENT_3D ( 'NONE', #47791, #54072, #4308 ) ; +#51026 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537413700, 90.20590598242378600, -28.39369363572349800 ) ) ; +#51027 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 13.00000000000001100, 6.794441961969995200 ) ) ; +#51028 = CIRCLE ( 'NONE', #2719, 10.50000000000009600 ) ; +#51029 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#51030 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274709400, 45.54999999999999700, -28.20555803802996700 ) ) ; +#51031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10422, #22667, #10154, #53918 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353298044800E-007, 0.0007670609591623562700 ), + .UNSPECIFIED. ) ; +#51033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51034 = VERTEX_POINT ( 'NONE', #57543 ) ; +#51035 = CONICAL_SURFACE ( 'NONE', #9300, 10.00000000000009200, 0.7853981633974447300 ) ; +#51036 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#51037 = AXIS2_PLACEMENT_3D ( 'NONE', #49139, #67682, #80186 ) ; +#51039 = ORIENTED_EDGE ( 'NONE', *, *, #60050, .F. ) ; +#51038 = EDGE_CURVE ( 'NONE', #74526, #39513, #45643, .T. ) ; +#51040 = EDGE_CURVE ( 'NONE', #6871, #23494, #31253, .T. ) ; +#51041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51042 = EDGE_CURVE ( 'NONE', #71041, #48799, #78556, .T. ) ; +#51043 = EDGE_LOOP ( 'NONE', ( #64258, #29180, #2635, #50305 ) ) ; +#51044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51045 = FACE_OUTER_BOUND ( 'NONE', #16792, .T. ) ; +#51046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51047 = CARTESIAN_POINT ( 'NONE', ( -15.68514033016293200, 35.04999999999999700, -28.35375031073497000 ) ) ; +#51048 = CIRCLE ( 'NONE', #35646, 10.50000000000009600 ) ; +#51049 = EDGE_LOOP ( 'NONE', ( #34886, #73191, #53454, #14097 ) ) ; +#51050 = AXIS2_PLACEMENT_3D ( 'NONE', #57419, #32928, #51108 ) ; +#51051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51052 = CIRCLE ( 'NONE', #48958, 10.00000000000009400 ) ; +#51053 = AXIS2_PLACEMENT_3D ( 'NONE', #41078, #3801, #47294 ) ; +#51055 = VERTEX_POINT ( 'NONE', #58068 ) ; +#51054 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146282700, 90.34267608797584600, -28.20555803803047800 ) ) ; +#51056 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732800100, 89.66414768974077300, -28.38420446581270100 ) ) ; +#51057 = EDGE_CURVE ( 'NONE', #55233, #31392, #14299, .T. ) ; +#51058 = VERTEX_POINT ( 'NONE', #33048 ) ; +#51059 = AXIS2_PLACEMENT_3D ( 'NONE', #47335, #3840, #34879 ) ; +#51060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51062 = LINE ( 'NONE', #13948, #1450 ) ; +#51063 = ORIENTED_EDGE ( 'NONE', *, *, #25841, .T. ) ; +#51064 = CONICAL_SURFACE ( 'NONE', #36193, 10.50000000000009600, 0.7853981633974500600 ) ; +#51065 = CARTESIAN_POINT ( 'NONE', ( 4.512728101709655900, 71.47860083896974000, -28.56001287362850500 ) ) ; +#51066 = ORIENTED_EDGE ( 'NONE', *, *, #65702, .F. ) ; +#51067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51068 = ORIENTED_EDGE ( 'NONE', *, *, #79333, .F. ) ; +#51069 = EDGE_LOOP ( 'NONE', ( #38182, #64555, #38044, #63328 ) ) ; +#51070 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656713800, 18.35339758437810100, -28.20555803802992800 ) ) ; +#51071 = ORIENTED_EDGE ( 'NONE', *, *, #14121, .F. ) ; +#51072 = FACE_OUTER_BOUND ( 'NONE', #77685, .T. ) ; +#51073 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 56.66666666666667100, 1.294441961969997200 ) ) ; +#51074 = ORIENTED_EDGE ( 'NONE', *, *, #66936, .F. ) ; +#51075 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153688600, 80.79999999999999700, -28.55171188418376700 ) ) ; +#51076 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7635, #44871, #13934, #57439 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690784078700E-007, 0.0007331055842534707500 ), + .UNSPECIFIED. ) ; +#51077 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 21.66666666666668200, 2.794441961969992100 ) ) ; +#51078 = ORIENTED_EDGE ( 'NONE', *, *, #23596, .F. ) ; +#51079 = FACE_OUTER_BOUND ( 'NONE', #15828, .T. ) ; +#51080 = AXIS2_PLACEMENT_3D ( 'NONE', #25146, #68656, #31413 ) ; +#51081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51082 = CARTESIAN_POINT ( 'NONE', ( 17.22115791441221000, 9.935236322205881300, -28.30315276798566900 ) ) ; +#51083 = ORIENTED_EDGE ( 'NONE', *, *, #777, .T. ) ; +#51084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51085 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51086 = FACE_OUTER_BOUND ( 'NONE', #916, .T. ) ; +#51087 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 59.00000000000000700, -1.205558038030002800 ) ) ; +#51088 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#51089 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543400, 60.27440177985818800, -28.29986836858017800 ) ) ; +#51090 = EDGE_CURVE ( 'NONE', #67441, #26007, #22102, .T. ) ; +#51091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51092 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040400, 61.43250300240213600, -28.20555803803014400 ) ) ; +#51093 = AXIS2_PLACEMENT_3D ( 'NONE', #16785, #23047, #54025 ) ; +#51094 = CIRCLE ( 'NONE', #63185, 9.500000000000099500 ) ; +#51095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51096 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194903400, 54.83849307182673300, -28.68631150211663800 ) ) ; +#51097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51098 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999300, 15.60073525436785500, -28.70555803802992800 ) ) ; +#51099 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 51.43945992495533700, -28.34042301926881200 ) ) ; +#51101 = ORIENTED_EDGE ( 'NONE', *, *, #12737, .F. ) ; +#51100 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#51102 = ADVANCED_FACE ( 'NONE', ( #34758 ), #60055, .F. ) ; +#51103 = FACE_OUTER_BOUND ( 'NONE', #18414, .T. ) ; +#51104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51105 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#51106 = VERTEX_POINT ( 'NONE', #39838 ) ; +#51107 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812500, 69.60439022488336000, -28.70555803802997700 ) ) ; +#51108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51110 = CONICAL_SURFACE ( 'NONE', #57283, 10.00000000000009400, 0.7853981633974447300 ) ; +#51111 = CONICAL_SURFACE ( 'NONE', #79371, 10.00000000000009200, 0.7853981633974447300 ) ; +#51113 = EDGE_CURVE ( 'NONE', #40002, #43256, #63952, .T. ) ; +#51112 = VERTEX_POINT ( 'NONE', #2547 ) ; +#51114 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 62.50000000000001400, -7.061964498581022400 ) ) ; +#51115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51117 = EDGE_CURVE ( 'NONE', #47124, #23642, #16780, .T. ) ; +#51118 = LINE ( 'NONE', #70555, #34644 ) ; +#51119 = PLANE ( 'NONE', #56821 ) ; +#51120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53591, #22322, #72387, #35125 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709173300, 0.0006599881756734670100 ), + .UNSPECIFIED. ) ; +#51121 = VERTEX_POINT ( 'NONE', #46064 ) ; +#51122 = ORIENTED_EDGE ( 'NONE', *, *, #48891, .F. ) ; +#51123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51124 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#51125 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#51126 = EDGE_CURVE ( 'NONE', #35438, #72751, #76559, .T. ) ; +#51127 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536600, 81.82440674572818300, -28.45987523529581900 ) ) ; +#51128 = ADVANCED_FACE ( 'NONE', ( #32777 ), #74630, .T. ) ; +#51129 = CIRCLE ( 'NONE', #62910, 10.00000000000009200 ) ; +#51130 = EDGE_CURVE ( 'NONE', #74851, #39312, #2279, .T. ) ; +#51131 = CIRCLE ( 'NONE', #42379, 10.50000000000009900 ) ; +#51132 = AXIS2_PLACEMENT_3D ( 'NONE', #10214, #41214, #47429 ) ; +#51133 = ORIENTED_EDGE ( 'NONE', *, *, #65527, .T. ) ; +#51134 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#51135 = EDGE_CURVE ( 'NONE', #38941, #30417, #12355, .T. ) ; +#51136 = VERTEX_POINT ( 'NONE', #52870 ) ; +#51137 = ORIENTED_EDGE ( 'NONE', *, *, #32817, .F. ) ; +#51138 = ORIENTED_EDGE ( 'NONE', *, *, #63674, .F. ) ; +#51139 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432837500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#51140 = ORIENTED_EDGE ( 'NONE', *, *, #76188, .F. ) ; +#51141 = FACE_OUTER_BOUND ( 'NONE', #53990, .T. ) ; +#51142 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 27.66666666666667100, 5.722645192245505700 ) ) ; +#51143 = FACE_OUTER_BOUND ( 'NONE', #49496, .T. ) ; +#51144 = VERTEX_POINT ( 'NONE', #9356 ) ; +#51145 = ORIENTED_EDGE ( 'NONE', *, *, #42351, .T. ) ; +#51146 = EDGE_CURVE ( 'NONE', #70191, #35889, #68637, .T. ) ; +#51147 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 61.43650294695079600, -28.30782889147504700 ) ) ; +#51148 = EDGE_CURVE ( 'NONE', #49174, #13047, #54149, .T. ) ; +#51149 = EDGE_CURVE ( 'NONE', #78012, #44027, #45382, .T. ) ; +#51150 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306342100, 41.59789380924876700, -28.25343951603343500 ) ) ; +#51151 = ORIENTED_EDGE ( 'NONE', *, *, #15671, .T. ) ; +#51152 = CONICAL_SURFACE ( 'NONE', #12274, 10.00000000000009400, 0.7853981633974447300 ) ; +#51153 = VERTEX_POINT ( 'NONE', #9638 ) ; +#51154 = CIRCLE ( 'NONE', #25131, 9.500000000000097700 ) ; +#51155 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654403100, 80.07527064970101100, -28.39317435246130500 ) ) ; +#51156 = AXIS2_PLACEMENT_3D ( 'NONE', #37435, #43688, #49666 ) ; +#51157 = PLANE ( 'NONE', #21571 ) ; +#51158 = ORIENTED_EDGE ( 'NONE', *, *, #24385, .T. ) ; +#51159 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60697, #23420, #79458, #42153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207962621200E-007, 0.0008724366121410585300 ), + .UNSPECIFIED. ) ; +#51160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51161 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51162 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, -0.9999999999999833500, -12.20555803803000200 ) ) ; +#51163 = CARTESIAN_POINT ( 'NONE', ( 1.968911145233676100E-013, 15.22261628933274100, -28.70555803803009500 ) ) ; +#51164 = CONICAL_SURFACE ( 'NONE', #30320, 10.50000000000009200, 0.7853981633974482800 ) ; +#51165 = ORIENTED_EDGE ( 'NONE', *, *, #67532, .F. ) ; +#51166 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34859, #2434, #41093, #3824 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007675026475730911600 ), + .UNSPECIFIED. ) ; +#51167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51168 = CONICAL_SURFACE ( 'NONE', #40478, 10.50000000000009600, 0.7853981633974518300 ) ; +#51169 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 72.18315603019263400, -28.70555803803024400 ) ) ; +#51170 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 59.60439022488335300, -28.70555803802997700 ) ) ; +#51171 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#51172 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 51.43945992495533700, -28.34042301926881200 ) ) ; +#51173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43388, #61927, #12418, #55904 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.661670182694575800E-016, 0.001179148174663515100 ), + .UNSPECIFIED. ) ; +#51174 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.43250300240198000, -28.20555803803047800 ) ) ; +#51175 = ORIENTED_EDGE ( 'NONE', *, *, #11713, .F. ) ; +#51176 = FACE_OUTER_BOUND ( 'NONE', #43275, .T. ) ; +#51177 = AXIS2_PLACEMENT_3D ( 'NONE', #63090, #25834, #7036 ) ; +#51178 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826523600, 59.95051138331402300, -28.33414295261581700 ) ) ; +#51179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51180 = EDGE_LOOP ( 'NONE', ( #29542, #48754, #53348, #28176, #4269 ) ) ; +#51181 = ADVANCED_FACE ( 'NONE', ( #43458 ), #8407, .F. ) ; +#51182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37275, #74578, #56057, #18809 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454721738600E-007, 0.0004559726636569444100 ), + .UNSPECIFIED. ) ; +#51184 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51185 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 51.43945992495533700, -28.34042301926881200 ) ) ; +#51186 = CONICAL_SURFACE ( 'NONE', #49380, 10.00000000000009400, 0.7853981633974447300 ) ; +#51187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51188 = CONICAL_SURFACE ( 'NONE', #58978, 10.50000000000009900, 0.7853981633974518300 ) ; +#51189 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 33.50000000000000700, 2.454695999814380200 ) ) ; +#51190 = ORIENTED_EDGE ( 'NONE', *, *, #21286, .F. ) ; +#51191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51192 = EDGE_CURVE ( 'NONE', #14715, #11971, #39691, .T. ) ; +#51193 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51194 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 38.91070809551056400, -28.20555803802995200 ) ) ; +#51195 = AXIS2_PLACEMENT_3D ( 'NONE', #45351, #1856, #20389 ) ; +#51196 = ORIENTED_EDGE ( 'NONE', *, *, #8399, .T. ) ; +#51197 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972650700, 59.37488905616152100, -28.55192314908427400 ) ) ; +#51198 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.16749699759769500, -28.20555803802997700 ) ) ; +#51199 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274738700, 13.73212903577600700, -28.37244029424756800 ) ) ; +#51200 = ORIENTED_EDGE ( 'NONE', *, *, #74206, .T. ) ; +#51201 = ADVANCED_FACE ( 'NONE', ( #10396 ), #56112, .T. ) ; +#51202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51203 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338530500, 49.49322649091134000, -28.30799595738870900 ) ) ; +#51204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51205 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#51206 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51208 = CIRCLE ( 'NONE', #47020, 10.50000000000009600 ) ; +#51209 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#51210 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656745000, 18.35339758437769200, -28.20555803803025800 ) ) ; +#51211 = ORIENTED_EDGE ( 'NONE', *, *, #57738, .T. ) ; +#51212 = AXIS2_PLACEMENT_3D ( 'NONE', #30288, #61298, #67515 ) ; +#51213 = CARTESIAN_POINT ( 'NONE', ( 3.031785615621762200, 81.31767869357339900, -28.25052235028429900 ) ) ; +#51214 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171900600, 80.46231468379652100, -28.37082013777861900 ) ) ; +#51215 = ORIENTED_EDGE ( 'NONE', *, *, #21654, .F. ) ; +#51216 = ADVANCED_FACE ( 'NONE', ( #26952 ), #23045, .T. ) ; +#51217 = ORIENTED_EDGE ( 'NONE', *, *, #38394, .T. ) ; +#51218 = VERTEX_POINT ( 'NONE', #10183 ) ; +#51219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51220 = ORIENTED_EDGE ( 'NONE', *, *, #55480, .T. ) ; +#51221 = PLANE ( 'NONE', #59938 ) ; +#51222 = CARTESIAN_POINT ( 'NONE', ( 8.466819876342329500, 85.79999999999998300, -28.37307693585060900 ) ) ; +#51223 = FACE_OUTER_BOUND ( 'NONE', #47218, .T. ) ; +#51224 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333400, 35.05000000000001800, -28.70555803802995200 ) ) ; +#51225 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747186900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#51226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51227 = EDGE_LOOP ( 'NONE', ( #38327, #45406, #57984 ) ) ; +#51228 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44163, #37943, #68704, #6950 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.237823150467865600E-005, 0.0003590896259719823600 ), + .UNSPECIFIED. ) ; +#51230 = PLANE ( 'NONE', #30654 ) ; +#51231 = ADVANCED_FACE ( 'NONE', ( #41521 ), #70704, .F. ) ; +#51232 = ORIENTED_EDGE ( 'NONE', *, *, #43720, .T. ) ; +#51233 = CONICAL_SURFACE ( 'NONE', #76830, 10.50000000000009800, 0.7853981633974518300 ) ; +#51234 = EDGE_LOOP ( 'NONE', ( #57689, #69997, #18362, #79225, #71117 ) ) ; +#51235 = EDGE_CURVE ( 'NONE', #16845, #52508, #25258, .T. ) ; +#51236 = ORIENTED_EDGE ( 'NONE', *, *, #52926, .T. ) ; +#51237 = EDGE_CURVE ( 'NONE', #73484, #80699, #72690, .T. ) ; +#51238 = CIRCLE ( 'NONE', #71483, 10.50000000000009600 ) ; +#51239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51240 = CONICAL_SURFACE ( 'NONE', #64765, 10.50000000000009600, 0.7853981633974500600 ) ; +#51241 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 5.000000000000010700, -1.205558038030002800 ) ) ; +#51242 = EDGE_CURVE ( 'NONE', #21619, #19608, #24989, .T. ) ; +#51243 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174864400, 90.16054007504448000, -28.34042301926892500 ) ) ; +#51244 = ORIENTED_EDGE ( 'NONE', *, *, #9368, .F. ) ; +#51245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51247 = CARTESIAN_POINT ( 'NONE', ( -3.628581783286367400, 60.16749699759768800, -28.25056166218020700 ) ) ; +#51248 = EDGE_CURVE ( 'NONE', #72036, #77335, #6480, .T. ) ; +#51249 = EDGE_CURVE ( 'NONE', #43655, #54777, #58071, .T. ) ; +#51250 = FACE_OUTER_BOUND ( 'NONE', #71481, .T. ) ; +#51251 = ORIENTED_EDGE ( 'NONE', *, *, #77072, .F. ) ; +#51252 = CARTESIAN_POINT ( 'NONE', ( 17.26457816485423500, 28.31692616327580600, -28.44650835714144000 ) ) ; +#51253 = ORIENTED_EDGE ( 'NONE', *, *, #54372, .F. ) ; +#51254 = VERTEX_POINT ( 'NONE', #41695 ) ; +#51255 = ORIENTED_EDGE ( 'NONE', *, *, #26759, .T. ) ; +#51256 = CONICAL_SURFACE ( 'NONE', #41493, 10.00000000000009400, 0.7853981633974447300 ) ; +#51257 = AXIS2_PLACEMENT_3D ( 'NONE', #28580, #72088, #34815 ) ; +#51258 = EDGE_CURVE ( 'NONE', #73384, #23135, #10795, .T. ) ; +#51259 = EDGE_CURVE ( 'NONE', #67901, #46667, #77107, .T. ) ; +#51260 = ORIENTED_EDGE ( 'NONE', *, *, #9661, .F. ) ; +#51261 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274709400, 14.36787096422374800, -28.37244029424741100 ) ) ; +#51262 = CARTESIAN_POINT ( 'NONE', ( -5.294162141782173600, 24.54999999999999700, -28.37136602294608400 ) ) ; +#51263 = EDGE_CURVE ( 'NONE', #32608, #2580, #28937, .T. ) ; +#51264 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.40050506338822000, -28.70555803802996700 ) ) ; +#51265 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#51266 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195353200, 41.91634594406194500, -28.35038903107272600 ) ) ; +#51267 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#51268 = AXIS2_PLACEMENT_3D ( 'NONE', #12616, #43842, #31385 ) ; +#51269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51270 = FACE_OUTER_BOUND ( 'NONE', #69444, .T. ) ; +#51271 = ORIENTED_EDGE ( 'NONE', *, *, #45002, .F. ) ; +#51272 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725291500, 35.05000000000000400, -28.20555803802995200 ) ) ; +#51273 = CARTESIAN_POINT ( 'NONE', ( -15.87129870841574200, 8.257402583168508100, -28.57819117655338600 ) ) ; +#51274 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.63556610137281700, -28.54207364681940000 ) ) ; +#51275 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#51276 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.69949493661175700, -28.70555803802997700 ) ) ; +#51277 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 89.91070809551072800, -28.20555803803030800 ) ) ; +#51278 = ORIENTED_EDGE ( 'NONE', *, *, #55340, .F. ) ; +#51279 = AXIS2_PLACEMENT_3D ( 'NONE', #15576, #59085, #21832 ) ; +#51280 = CARTESIAN_POINT ( 'NONE', ( 3.639407206442152500, 28.66749699759768800, -28.25435056028469600 ) ) ; +#51281 = AXIS2_PLACEMENT_3D ( 'NONE', #50798, #13609, #57101 ) ; +#51282 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#51283 = AXIS2_PLACEMENT_3D ( 'NONE', #51125, #20456, #38916 ) ; +#51284 = ADVANCED_FACE ( 'NONE', ( #37595 ), #67009, .T. ) ; +#51285 = CONICAL_SURFACE ( 'NONE', #23959, 10.50000000000009400, 0.7853981633974500600 ) ; +#51286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51287 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67878, #61640, #12123, #55613 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003545673101750631700, 0.0007596411030282977300 ), + .UNSPECIFIED. ) ; +#51288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51289 = CIRCLE ( 'NONE', #74119, 9.500000000000097700 ) ; +#51290 = ORIENTED_EDGE ( 'NONE', *, *, #25576, .T. ) ; +#51291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51292 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 10.83333333333335200, -9.205558038030003900 ) ) ; +#51293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51294 = ORIENTED_EDGE ( 'NONE', *, *, #17690, .F. ) ; +#51295 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153558000, 80.79999999999984100, -28.55171188418395500 ) ) ; +#51296 = ORIENTED_EDGE ( 'NONE', *, *, #52471, .F. ) ; +#51297 = VERTEX_POINT ( 'NONE', #54745 ) ; +#51298 = EDGE_LOOP ( 'NONE', ( #30453, #54046, #32389, #18592, #24263 ) ) ; +#51299 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000010200, 9.418457393421036300, -28.68863412692833800 ) ) ; +#51300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51301 = ADVANCED_FACE ( 'NONE', ( #4532 ), #19119, .T. ) ; +#51302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51303 = AXIS2_PLACEMENT_3D ( 'NONE', #43384, #80667, #30906 ) ; +#51305 = ORIENTED_EDGE ( 'NONE', *, *, #44104, .T. ) ; +#51304 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#51306 = EDGE_CURVE ( 'NONE', #59962, #62498, #35685, .T. ) ; +#51307 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33369, #21153, #70897, #33648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276984628300E-007, 0.0007677744771234620900 ), + .UNSPECIFIED. ) ; +#51308 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51309 = CIRCLE ( 'NONE', #46524, 10.00000000000009200 ) ; +#51310 = ORIENTED_EDGE ( 'NONE', *, *, #54935, .F. ) ; +#51311 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51312 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51313 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51314 = EDGE_LOOP ( 'NONE', ( #63277, #17162, #79767, #72275 ) ) ; +#51315 = ADVANCED_FACE ( 'NONE', ( #52182 ), #50237, .T. ) ; +#51316 = EDGE_CURVE ( 'NONE', #30244, #71240, #66830, .T. ) ; +#51317 = ORIENTED_EDGE ( 'NONE', *, *, #74661, .T. ) ; +#51318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18651, #55897, #24914, #68417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083035862000E-007, 0.0003101809493108535200 ), + .UNSPECIFIED. ) ; +#51319 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286475500, 68.93300507136166300, -28.67024809316607300 ) ) ; +#51320 = AXIS2_PLACEMENT_3D ( 'NONE', #61329, #73814, #36529 ) ; +#51321 = CIRCLE ( 'NONE', #77713, 10.50000000000009600 ) ; +#51322 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51323 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825700, 79.66414768974041700, -28.38420446581291400 ) ) ; +#51324 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#51325 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343256600, 18.35339758437769200, -28.20555803803025800 ) ) ; +#51326 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75376, #50580, #7081, #56876 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999333565800E-007, 0.0006654947828616327100 ), + .UNSPECIFIED. ) ; +#51327 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 80.34267608797570400, -28.20555803802997700 ) ) ; +#51328 = EDGE_LOOP ( 'NONE', ( #63329, #2897, #71734, #69065 ) ) ; +#51329 = ADVANCED_FACE ( 'NONE', ( #68769 ), #48744, .T. ) ; +#51330 = AXIS2_PLACEMENT_3D ( 'NONE', #58561, #64854, #8765 ) ; +#51331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51332 = FACE_OUTER_BOUND ( 'NONE', #18789, .T. ) ; +#51334 = ORIENTED_EDGE ( 'NONE', *, *, #13642, .T. ) ; +#51333 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51335 = ORIENTED_EDGE ( 'NONE', *, *, #41538, .T. ) ; +#51336 = CARTESIAN_POINT ( 'NONE', ( 16.76916930534293800, 70.94992009694541900, -28.43638873268731600 ) ) ; +#51337 = ADVANCED_FACE ( 'NONE', ( #39572 ), #48998, .T. ) ; +#51338 = FACE_OUTER_BOUND ( 'NONE', #51346, .T. ) ; +#51339 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 54.50000000000001400, -4.865812075874393000 ) ) ; +#51340 = AXIS2_PLACEMENT_3D ( 'NONE', #63234, #50662, #31941 ) ; +#51341 = CARTESIAN_POINT ( 'NONE', ( -2.466255859631235800, 91.59999999999999400, -28.70555803803007700 ) ) ; +#51342 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 19.50000000000000400, -7.061964498581016200 ) ) ; +#51343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51344 = EDGE_CURVE ( 'NONE', #13694, #32442, #33726, .T. ) ; +#51345 = FACE_OUTER_BOUND ( 'NONE', #34170, .T. ) ; +#51346 = EDGE_LOOP ( 'NONE', ( #30116, #15115, #46540 ) ) ; +#51347 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#51348 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#51349 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 56.83333333333334300, 1.741883078712340300 ) ) ; +#51350 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180756500, 79.94924284854684500, -28.20555803802997700 ) ) ; +#51351 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368900, 60.79999999999998300, -28.55171188418376000 ) ) ; +#51352 = EDGE_LOOP ( 'NONE', ( #39325, #29081, #80802, #29770 ) ) ; +#51353 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943322900, 35.04999999999997600, -28.70555803802995200 ) ) ; +#51354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51817, #2331, #8589, #52091 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710915500, 0.0008082646680357284600 ), + .UNSPECIFIED. ) ; +#51355 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#51356 = CARTESIAN_POINT ( 'NONE', ( -6.852157730108388000E-014, 43.65857157145693900, -28.20555803802997700 ) ) ; +#51357 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#51358 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 89.60439022488283500, -28.70555803803047500 ) ) ; +#51359 = FACE_OUTER_BOUND ( 'NONE', #75806, .T. ) ; +#51360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51361 = FACE_OUTER_BOUND ( 'NONE', #58008, .T. ) ; +#51362 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#51363 = ORIENTED_EDGE ( 'NONE', *, *, #21601, .T. ) ; +#51365 = EDGE_CURVE ( 'NONE', #31068, #29074, #21108, .T. ) ; +#51364 = ORIENTED_EDGE ( 'NONE', *, *, #9866, .T. ) ; +#51366 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567155000, 30.74660241562189700, -28.20555803802995200 ) ) ; +#51367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51368 = ORIENTED_EDGE ( 'NONE', *, *, #74654, .F. ) ; +#51369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51370 = EDGE_LOOP ( 'NONE', ( #80440, #4058, #4666 ) ) ; +#51371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51372 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51373 = VERTEX_POINT ( 'NONE', #61573 ) ; +#51374 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#51375 = EDGE_LOOP ( 'NONE', ( #12168, #16962, #30076 ) ) ; +#51376 = VERTEX_POINT ( 'NONE', #49278 ) ; +#51377 = CARTESIAN_POINT ( 'NONE', ( 1.272691540716729900, 85.79999999999998300, -28.53979898350160100 ) ) ; +#51378 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#51379 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 50.79999999999999000, -28.45034744217088700 ) ) ; +#51380 = AXIS2_PLACEMENT_3D ( 'NONE', #13557, #75805, #38249 ) ; +#51381 = ORIENTED_EDGE ( 'NONE', *, *, #33832, .F. ) ; +#51382 = EDGE_CURVE ( 'NONE', #77100, #23333, #62649, .T. ) ; +#51383 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956500, 61.78933626866474800, -28.53923937255199300 ) ) ; +#51384 = EDGE_CURVE ( 'NONE', #62756, #42291, #17183, .T. ) ; +#51385 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 70.13716795162658000, -28.48697406221668500 ) ) ; +#51386 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#51387 = EDGE_CURVE ( 'NONE', #9494, #53523, #612, .T. ) ; +#51388 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#51389 = CIRCLE ( 'NONE', #8379, 10.50000000000009600 ) ; +#51390 = AXIS2_PLACEMENT_3D ( 'NONE', #817, #7074, #50573 ) ; +#51391 = EDGE_LOOP ( 'NONE', ( #61249, #62830, #30081, #53673 ) ) ; +#51392 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 60.33333333333334300, 2.794441961969998300 ) ) ; +#51393 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#51394 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 22.65857157145701000, -28.20555803802995200 ) ) ; +#51395 = VERTEX_POINT ( 'NONE', #74084 ) ; +#51396 = ORIENTED_EDGE ( 'NONE', *, *, #68033, .T. ) ; +#51397 = CARTESIAN_POINT ( 'NONE', ( -7.546047120499110900E-014, 54.37738371066721000, -28.70555803802997700 ) ) ; +#51398 = FACE_OUTER_BOUND ( 'NONE', #43483, .T. ) ; +#51399 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906698700, 51.67036336027379700, -28.27338767626476800 ) ) ; +#51400 = AXIS2_PLACEMENT_3D ( 'NONE', #33448, #76970, #39694 ) ; +#51401 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51402 = AXIS2_PLACEMENT_3D ( 'NONE', #12335, #55814, #18578 ) ; +#51403 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#51404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54989, #11505, #67509, #30282 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.938893903907228400E-017, 0.001043664170964717300 ), + .UNSPECIFIED. ) ; +#51405 = CARTESIAN_POINT ( 'NONE', ( -11.16718281739630000, 51.03343807497617500, -28.37235298663059500 ) ) ; +#51406 = ORIENTED_EDGE ( 'NONE', *, *, #33908, .F. ) ; +#51407 = EDGE_CURVE ( 'NONE', #25226, #47599, #48145, .T. ) ; +#51408 = AXIS2_PLACEMENT_3D ( 'NONE', #14122, #51331, #70128 ) ; +#51409 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052157200, 71.31766786975350700, -28.25051428653848300 ) ) ; +#51410 = FACE_OUTER_BOUND ( 'NONE', #9826, .T. ) ; +#51411 = VERTEX_POINT ( 'NONE', #62106 ) ; +#51412 = ADVANCED_FACE ( 'NONE', ( #31786 ), #46324, .F. ) ; +#51413 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 71.35277818615432500, -28.70555803802999500 ) ) ; +#51414 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46864, #71380, #53139, #15884 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279226101396600E-007, 0.001119324643800066700 ), + .UNSPECIFIED. ) ; +#51415 = VERTEX_POINT ( 'NONE', #6335 ) ; +#51416 = EDGE_LOOP ( 'NONE', ( #51236, #19283, #76278 ) ) ; +#51417 = ADVANCED_FACE ( 'NONE', ( #29873 ), #13299, .F. ) ; +#51418 = EDGE_CURVE ( 'NONE', #46380, #46150, #64902, .T. ) ; +#51419 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 25.50000000000000000, -7.061964498581022400 ) ) ; +#51420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51421 = AXIS2_PLACEMENT_3D ( 'NONE', #29076, #72561, #35305 ) ; +#51422 = AXIS2_PLACEMENT_3D ( 'NONE', #24286, #67801, #30557 ) ; +#51423 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#51424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51425 = ADVANCED_FACE ( 'NONE', ( #62936 ), #44361, .T. ) ; +#51426 = FACE_OUTER_BOUND ( 'NONE', #57020, .T. ) ; +#51427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51428 = CONICAL_SURFACE ( 'NONE', #24434, 10.00000000000009400, 0.7853981633974447300 ) ; +#51429 = ORIENTED_EDGE ( 'NONE', *, *, #73712, .T. ) ; +#51430 = AXIS2_PLACEMENT_3D ( 'NONE', #76832, #39570, #2278 ) ; +#51431 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818077900, 79.94924284854685900, -28.20555803802997700 ) ) ; +#51432 = ORIENTED_EDGE ( 'NONE', *, *, #16991, .T. ) ; +#51433 = CARTESIAN_POINT ( 'NONE', ( 17.90233405035089500, 9.864921610585623700, -28.27580420063965900 ) ) ; +#51434 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473003000, 80.01262610361132500, -28.29936525552463100 ) ) ; +#51435 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, -3.166666666666678500, 9.794441961969999600 ) ) ; +#51436 = CONICAL_SURFACE ( 'NONE', #27998, 10.50000000000009600, 0.7853981633974500600 ) ; +#51437 = VERTEX_POINT ( 'NONE', #56354 ) ; +#51438 = CIRCLE ( 'NONE', #41679, 10.00000000000009200 ) ; +#51439 = AXIS2_PLACEMENT_3D ( 'NONE', #36374, #79911, #42619 ) ; +#51440 = ORIENTED_EDGE ( 'NONE', *, *, #2475, .T. ) ; +#51441 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999999600, 71.43250300240228500, -28.20555803802997700 ) ) ; +#51442 = ORIENTED_EDGE ( 'NONE', *, *, #64456, .T. ) ; +#51443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51444 = ORIENTED_EDGE ( 'NONE', *, *, #64002, .T. ) ; +#51445 = FACE_OUTER_BOUND ( 'NONE', #60820, .T. ) ; +#51446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51447 = ORIENTED_EDGE ( 'NONE', *, *, #61114, .T. ) ; +#51448 = VERTEX_POINT ( 'NONE', #12872 ) ; +#51449 = VERTEX_POINT ( 'NONE', #62630 ) ; +#51450 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873542700, 26.92044679784048400, -28.64059091698901900 ) ) ; +#51451 = EDGE_LOOP ( 'NONE', ( #68292, #41003, #76695 ) ) ; +#51452 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 22.65857157145701000, -28.20555803802995200 ) ) ; +#51453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51454 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#51455 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#51456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51457 = AXIS2_PLACEMENT_3D ( 'NONE', #14960, #70984, #33728 ) ; +#51458 = VERTEX_POINT ( 'NONE', #25387 ) ; +#51459 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467681300, 40.76893971292317100, -28.57333386111099200 ) ) ; +#51460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51461 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21597, #58827, #34085, #77598 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006649316450232187600, 0.0009605139212323049300 ), + .UNSPECIFIED. ) ; +#51462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51463 = ORIENTED_EDGE ( 'NONE', *, *, #76193, .T. ) ; +#51464 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 5.000000000000000900, -18.70555803803001300 ) ) ; +#51465 = CIRCLE ( 'NONE', #60511, 10.50000000000009200 ) ; +#51466 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841388800, 20.43650294695131500, -28.30782889147480900 ) ) ; +#51467 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 31.33333333333333600, -5.535685056952199400 ) ) ; +#51468 = VERTEX_POINT ( 'NONE', #19098 ) ; +#51469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51471 = EDGE_LOOP ( 'NONE', ( #39330, #30305, #66320, #15133, #8173 ) ) ; +#51472 = VERTEX_POINT ( 'NONE', #31636 ) ; +#51473 = VERTEX_POINT ( 'NONE', #75132 ) ; +#51474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51475 = ORIENTED_EDGE ( 'NONE', *, *, #59561, .F. ) ; +#51476 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#51477 = CARTESIAN_POINT ( 'NONE', ( -16.34768037227507500, 92.94768037227508700, -28.61432978906881200 ) ) ; +#51478 = CIRCLE ( 'NONE', #80230, 10.50000000000009800 ) ; +#51479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51480 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 90.34267608797567600, -28.20555803802997700 ) ) ; +#51481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51482 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567176700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#51483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51485 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528152600, 20.46868088498121800, -28.51286550264509900 ) ) ; +#51486 = ORIENTED_EDGE ( 'NONE', *, *, #56212, .T. ) ; +#51487 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180789400, 69.94924284854687400, -28.20555803802997700 ) ) ; +#51488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51490 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877843900, 41.02667319908789500, -28.37233769390157100 ) ) ; +#51491 = EDGE_CURVE ( 'NONE', #14833, #29074, #60978, .T. ) ; +#51492 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51493 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#51494 = FACE_OUTER_BOUND ( 'NONE', #17542, .T. ) ; +#51495 = ORIENTED_EDGE ( 'NONE', *, *, #42238, .T. ) ; +#51496 = EDGE_CURVE ( 'NONE', #59592, #46685, #33720, .T. ) ; +#51497 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17771, #23761, #30300, #73795 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0007677775503743587000 ), + .UNSPECIFIED. ) ; +#51498 = ORIENTED_EDGE ( 'NONE', *, *, #51491, .T. ) ; +#51499 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 81.25732391202397800, -28.20555803802997700 ) ) ; +#51500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51501 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 90.37705528805135200, -28.20555803802997700 ) ) ; +#51502 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 9.932503002402294000, -28.20555803802994200 ) ) ; +#51503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72155, #34877, #41121, #3839 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001333132141653829400 ), + .UNSPECIFIED. ) ; +#51504 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528041508100, 83.65857157145704500, -28.37229765499291300 ) ) ; +#51505 = EDGE_CURVE ( 'NONE', #15610, #53113, #19249, .T. ) ; +#51506 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 28.57141756547892100, -28.70555803802994200 ) ) ; +#51507 = EDGE_CURVE ( 'NONE', #27666, #61231, #48288, .T. ) ; +#51508 = AXIS2_PLACEMENT_3D ( 'NONE', #6148, #74177, #30915 ) ; +#51509 = CIRCLE ( 'NONE', #24891, 10.50000000000009600 ) ; +#51510 = CONICAL_SURFACE ( 'NONE', #80661, 10.00000000000009600, 0.7853981633974482800 ) ; +#51511 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37028, #74334, #55801, #18552 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287189296000E-007, 0.0004318378175236011900 ), + .UNSPECIFIED. ) ; +#51512 = ORIENTED_EDGE ( 'NONE', *, *, #12238, .T. ) ; +#51513 = ADVANCED_FACE ( 'NONE', ( #15231 ), #59009, .T. ) ; +#51514 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 2.833333333333339700, -2.545304000185615800 ) ) ; +#51515 = EDGE_LOOP ( 'NONE', ( #80630, #20613, #24859, #4816 ) ) ; +#51516 = AXIS2_PLACEMENT_3D ( 'NONE', #15852, #3322, #59372 ) ; +#51517 = EDGE_CURVE ( 'NONE', #3342, #24588, #75548, .T. ) ; +#51518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51519 = EDGE_CURVE ( 'NONE', #32364, #6616, #4782, .T. ) ; +#51520 = EDGE_CURVE ( 'NONE', #56790, #50428, #11344, .T. ) ; +#51521 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489072400, 39.47143078992715500, -28.37063977681167500 ) ) ; +#51522 = AXIS2_PLACEMENT_3D ( 'NONE', #47431, #10216, #53723 ) ; +#51523 = CIRCLE ( 'NONE', #20111, 10.00000000000009600 ) ; +#51524 = VERTEX_POINT ( 'NONE', #63449 ) ; +#51525 = CIRCLE ( 'NONE', #8782, 9.500000000000097700 ) ; +#51526 = VERTEX_POINT ( 'NONE', #1399 ) ; +#51527 = AXIS2_PLACEMENT_3D ( 'NONE', #42574, #48824, #55097 ) ; +#51528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51529 = VERTEX_POINT ( 'NONE', #26190 ) ; +#51530 = FACE_OUTER_BOUND ( 'NONE', #47295, .T. ) ; +#51531 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#51532 = ORIENTED_EDGE ( 'NONE', *, *, #47264, .F. ) ; +#51533 = ORIENTED_EDGE ( 'NONE', *, *, #44095, .F. ) ; +#51534 = ORIENTED_EDGE ( 'NONE', *, *, #48181, .T. ) ; +#51535 = ORIENTED_EDGE ( 'NONE', *, *, #62633, .F. ) ; +#51536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51537 = ORIENTED_EDGE ( 'NONE', *, *, #37833, .F. ) ; +#51539 = ORIENTED_EDGE ( 'NONE', *, *, #14615, .F. ) ; +#51538 = EDGE_CURVE ( 'NONE', #13621, #44569, #79475, .T. ) ; +#51540 = AXIS2_PLACEMENT_3D ( 'NONE', #69806, #32550, #76053 ) ; +#51541 = AXIS2_PLACEMENT_3D ( 'NONE', #77851, #40576, #3306 ) ; +#51542 = VERTEX_POINT ( 'NONE', #50879 ) ; +#51543 = PLANE ( 'NONE', #28882 ) ; +#51544 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#51546 = ADVANCED_FACE ( 'NONE', ( #2552 ), #69674, .T. ) ; +#51545 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70255, #26769, #1975, #45463 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.853303177097572500E-005, 0.0008082646680357303000 ), + .UNSPECIFIED. ) ; +#51547 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387502000, 75.13282980700516600, -28.53914313452737900 ) ) ; +#51548 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#51549 = CONICAL_SURFACE ( 'NONE', #56788, 10.00000000000009200, 0.7853981633974447300 ) ; +#51550 = ORIENTED_EDGE ( 'NONE', *, *, #64675, .F. ) ; +#51551 = ORIENTED_EDGE ( 'NONE', *, *, #80604, .F. ) ; +#51552 = EDGE_LOOP ( 'NONE', ( #4150, #44668, #62153, #42184, #67221 ) ) ; +#51553 = VERTEX_POINT ( 'NONE', #1661 ) ; +#51554 = VERTEX_POINT ( 'NONE', #45148 ) ; +#51555 = ORIENTED_EDGE ( 'NONE', *, *, #36523, .T. ) ; +#51556 = AXIS2_PLACEMENT_3D ( 'NONE', #46190, #77226, #64758 ) ; +#51557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51558 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.23796787468679200, -28.38801640354855100 ) ) ; +#51559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51560 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702741000, 52.22511094383837400, -28.55192314908415700 ) ) ; +#51561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#51562 = FACE_OUTER_BOUND ( 'NONE', #15780, .T. ) ; +#51563 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428569400, 10.02858243452105900, -28.70555803802994200 ) ) ; +#51564 = ORIENTED_EDGE ( 'NONE', *, *, #60960, .T. ) ; +#51565 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51566 = ORIENTED_EDGE ( 'NONE', *, *, #41467, .F. ) ; +#51567 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 69.91070809551060000, -28.20555803802997700 ) ) ; +#51568 = AXIS2_PLACEMENT_3D ( 'NONE', #46747, #28334, #3237 ) ; +#51569 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195927700, 33.15857157145700300, -28.37229765499281000 ) ) ; +#51570 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 8.666666666666683800, 5.722645192245505700 ) ) ; +#51571 = FACE_OUTER_BOUND ( 'NONE', #7416, .T. ) ; +#51572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51573 = ORIENTED_EDGE ( 'NONE', *, *, #20220, .F. ) ; +#51574 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844493900, 85.79999999999998300, -28.20555803802997700 ) ) ; +#51575 = ORIENTED_EDGE ( 'NONE', *, *, #21407, .F. ) ; +#51576 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ; +#51577 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#51578 = AXIS2_PLACEMENT_3D ( 'NONE', #32824, #76347, #39061 ) ; +#51579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51580 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 24.54999999999997600, -28.20555803802994200 ) ) ; +#51581 = EDGE_CURVE ( 'NONE', #49502, #4132, #71120, .T. ) ; +#51582 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51583 = AXIS2_PLACEMENT_3D ( 'NONE', #19891, #26158, #57146 ) ; +#51584 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818086000, 71.65075715145327700, -28.20555803803047800 ) ) ; +#51585 = FACE_OUTER_BOUND ( 'NONE', #39451, .T. ) ; +#51586 = EDGE_LOOP ( 'NONE', ( #8995, #79278, #72010, #43442, #28292, #24427 ) ) ; +#51587 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#51588 = ORIENTED_EDGE ( 'NONE', *, *, #46743, .T. ) ; +#51589 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52300, #21351, #77365, #40085 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025958800, 0.0006251342085520325900 ), + .UNSPECIFIED. ) ; +#51590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51592 = CARTESIAN_POINT ( 'NONE', ( 9.343046065458670700, 89.08026449163855900, -28.70555803803005900 ) ) ; +#51593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51594 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 11.09027028261002800, -28.70555803802993500 ) ) ; +#51595 = ADVANCED_FACE ( 'NONE', ( #42438 ), #40509, .T. ) ; +#51596 = CONICAL_SURFACE ( 'NONE', #47115, 10.50000000000009600, 0.7853981633974500600 ) ; +#51597 = ORIENTED_EDGE ( 'NONE', *, *, #35086, .T. ) ; +#51598 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ; +#51599 = EDGE_CURVE ( 'NONE', #13816, #29390, #56638, .T. ) ; +#51600 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 17.97246552159110100, -28.38801640354855800 ) ) ; +#51601 = FACE_OUTER_BOUND ( 'NONE', #21528, .T. ) ; +#51602 = EDGE_CURVE ( 'NONE', #27811, #12824, #57069, .T. ) ; +#51603 = ORIENTED_EDGE ( 'NONE', *, *, #25576, .F. ) ; +#51604 = ORIENTED_EDGE ( 'NONE', *, *, #33795, .T. ) ; +#51605 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046700, 18.34510448120779100, -28.37193179497725000 ) ) ; +#51606 = ORIENTED_EDGE ( 'NONE', *, *, #79667, .T. ) ; +#51607 = ORIENTED_EDGE ( 'NONE', *, *, #14100, .T. ) ; +#51608 = ADVANCED_FACE ( 'NONE', ( #9361 ), #71674, .F. ) ; +#51609 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 52.33333333333334300, 3.124568980892187500 ) ) ; +#51610 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51611 = EDGE_CURVE ( 'NONE', #4729, #7085, #42158, .T. ) ; +#51612 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 17.33333333333333900, 5.722645192245503900 ) ) ; +#51613 = EDGE_CURVE ( 'NONE', #39817, #75931, #27760, .T. ) ; +#51615 = ORIENTED_EDGE ( 'NONE', *, *, #68144, .T. ) ; +#51614 = AXIS2_PLACEMENT_3D ( 'NONE', #13339, #75333, #25852 ) ; +#51616 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#51617 = CONICAL_SURFACE ( 'NONE', #40575, 10.00000000000009400, 0.7853981633974447300 ) ; +#51618 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 41.46868088498121800, -28.51286550264513100 ) ) ; +#51619 = EDGE_LOOP ( 'NONE', ( #73298, #26241, #55322, #45387 ) ) ; +#51620 = CARTESIAN_POINT ( 'NONE', ( -16.56790757632391500, 25.72927195446097000, -28.58363361004981200 ) ) ; +#51621 = EDGE_LOOP ( 'NONE', ( #77822, #45547, #25689 ) ) ; +#51622 = ADVANCED_FACE ( 'NONE', ( #7403 ), #27916, .T. ) ; +#51623 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 54.66666666666667100, -6.705558038030000400 ) ) ; +#51624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51625 = ORIENTED_EDGE ( 'NONE', *, *, #68522, .F. ) ; +#51626 = ORIENTED_EDGE ( 'NONE', *, *, #7126, .F. ) ; +#51627 = EDGE_LOOP ( 'NONE', ( #31995, #24492, #30516, #56279, #75461 ) ) ; +#51628 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 35.04999999999999700, -28.20555803802995200 ) ) ; +#51629 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#51630 = FACE_OUTER_BOUND ( 'NONE', #34195, .T. ) ; +#51631 = AXIS2_PLACEMENT_3D ( 'NONE', #71815, #34553, #78063 ) ; +#51632 = ORIENTED_EDGE ( 'NONE', *, *, #21654, .T. ) ; +#51633 = EDGE_CURVE ( 'NONE', #21820, #18254, #13295, .T. ) ; +#51634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51635 = EDGE_CURVE ( 'NONE', #32933, #62053, #79599, .T. ) ; +#51636 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567151000, 39.35339758437810800, -28.20555803802995200 ) ) ; +#51637 = EDGE_CURVE ( 'NONE', #14896, #47605, #73618, .T. ) ; +#51639 = ADVANCED_FACE ( 'NONE', ( #23989 ), #69700, .T. ) ; +#51638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37399, #74706, #43647, #6424 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213717221200E-007, 0.0008724366121415425100 ), + .UNSPECIFIED. ) ; +#51640 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51641 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148544600, 15.00238095238092000, -28.70555803802992800 ) ) ; +#51642 = AXIS2_PLACEMENT_3D ( 'NONE', #24484, #67994, #30752 ) ; +#51643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51644 = CONICAL_SURFACE ( 'NONE', #33150, 10.50000000000009600, 0.7853981633974500600 ) ; +#51645 = ORIENTED_EDGE ( 'NONE', *, *, #70491, .F. ) ; +#51646 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49650, #36905, #18694, #62223 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662944600 ), + .UNSPECIFIED. ) ; +#51647 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 65.79999999999999700, -28.63843632546336000 ) ) ; +#51648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51649 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849377400, 39.27966528189956800, -28.30868034705244800 ) ) ; +#51650 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28410, #65394, #65911, #28679 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549601210800E-007, 0.0008759529789575486400 ), + .UNSPECIFIED. ) ; +#51651 = CARTESIAN_POINT ( 'NONE', ( -10.95973104149357100, 20.37561462481245700, -28.30309985153373700 ) ) ; +#51652 = EDGE_CURVE ( 'NONE', #40804, #72597, #5474, .T. ) ; +#51653 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51654 = AXIS2_PLACEMENT_3D ( 'NONE', #36800, #80338, #43053 ) ; +#51655 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#51656 = AXIS2_PLACEMENT_3D ( 'NONE', #11620, #55111, #17873 ) ; +#51657 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51658 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1645, #7896, #63976, #26707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178127679500, 0.0006016798664344268500 ), + .UNSPECIFIED. ) ; +#51660 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#51661 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873541300, 32.67955320215948900, -28.64059091698902300 ) ) ; +#51662 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 58.16666666666665700, -3.349151577478988200 ) ) ; +#51663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51664 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195928600, 67.94142842854297700, -28.37229765499282100 ) ) ; +#51665 = VERTEX_POINT ( 'NONE', #65065 ) ; +#51666 = ORIENTED_EDGE ( 'NONE', *, *, #64581, .F. ) ; +#51667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51668 = EDGE_LOOP ( 'NONE', ( #15030, #24517, #77997, #49432 ) ) ; +#51669 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 28.42298334620784700, -28.20555803802994200 ) ) ; +#51670 = CARTESIAN_POINT ( 'NONE', ( -8.314034490221684900, 24.54999999999998300, -28.37321477197628300 ) ) ; +#51671 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#51672 = AXIS2_PLACEMENT_3D ( 'NONE', #4692, #48184, #10978 ) ; +#51673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51674 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51675 = CONICAL_SURFACE ( 'NONE', #43429, 10.00000000000009600, 0.7853981633974447300 ) ; +#51676 = EDGE_LOOP ( 'NONE', ( #36967, #62572, #18928, #61327 ) ) ; +#51677 = ORIENTED_EDGE ( 'NONE', *, *, #15277, .F. ) ; +#51679 = EDGE_CURVE ( 'NONE', #76021, #75931, #22031, .T. ) ; +#51678 = ORIENTED_EDGE ( 'NONE', *, *, #43008, .F. ) ; +#51680 = CONICAL_SURFACE ( 'NONE', #35966, 10.50000000000009900, 0.7853981633974518300 ) ; +#51681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51682 = ORIENTED_EDGE ( 'NONE', *, *, #28864, .F. ) ; +#51683 = AXIS2_PLACEMENT_3D ( 'NONE', #5285, #73565, #42532 ) ; +#51684 = ORIENTED_EDGE ( 'NONE', *, *, #66770, .F. ) ; +#51685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54879, #11392, #73668, #36379 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143679725000E-007, 0.0004559721418120913800 ), + .UNSPECIFIED. ) ; +#51686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51687 = ORIENTED_EDGE ( 'NONE', *, *, #7126, .T. ) ; +#51688 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 23.33333333333335000, 2.794441961969998300 ) ) ; +#51689 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654721300, 80.27440177985815200, -28.29986836858019200 ) ) ; +#51690 = ORIENTED_EDGE ( 'NONE', *, *, #57182, .F. ) ; +#51691 = ORIENTED_EDGE ( 'NONE', *, *, #42852, .T. ) ; +#51692 = AXIS2_PLACEMENT_3D ( 'NONE', #26153, #32386, #13648 ) ; +#51693 = CONICAL_SURFACE ( 'NONE', #61972, 10.00000000000009200, 0.7853981633974447300 ) ; +#51694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45013, #13806, #70066, #32812 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526820179500E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#51695 = CARTESIAN_POINT ( 'NONE', ( 17.24306493325778400, 71.43482203710600200, -28.29548531139009500 ) ) ; +#51696 = ADVANCED_FACE ( 'NONE', ( #55099 ), #3501, .F. ) ; +#51697 = CONICAL_SURFACE ( 'NONE', #78631, 10.00000000000009600, 0.7853981633974447300 ) ; +#51698 = AXIS2_PLACEMENT_3D ( 'NONE', #62484, #13001, #25235 ) ; +#51699 = EDGE_LOOP ( 'NONE', ( #9273, #34121, #29004, #34148 ) ) ; +#51700 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051555100, 71.01872124563912800, -28.53757464917582700 ) ) ; +#51701 = ORIENTED_EDGE ( 'NONE', *, *, #16873, .T. ) ; +#51702 = ORIENTED_EDGE ( 'NONE', *, *, #44837, .T. ) ; +#51703 = EDGE_LOOP ( 'NONE', ( #40013, #34693, #53849 ) ) ; +#51704 = ORIENTED_EDGE ( 'NONE', *, *, #19248, .T. ) ; +#51705 = FACE_OUTER_BOUND ( 'NONE', #18063, .T. ) ; +#51706 = ADVANCED_FACE ( 'NONE', ( #77509 ), #51152, .T. ) ; +#51707 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 9.936502946951316400, -28.30782889147480600 ) ) ; +#51708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51710 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 66.83333333333334300, -9.205558038030003900 ) ) ; +#51711 = EDGE_LOOP ( 'NONE', ( #28894, #39944, #17363, #35512 ) ) ; +#51712 = EDGE_CURVE ( 'NONE', #25711, #14507, #65159, .T. ) ; +#51713 = CIRCLE ( 'NONE', #11252, 10.50000000000009600 ) ; +#51714 = EDGE_LOOP ( 'NONE', ( #15212, #71992, #2531 ) ) ; +#51716 = VERTEX_POINT ( 'NONE', #22065 ) ; +#51715 = ADVANCED_FACE ( 'NONE', ( #53150 ), #18120, .T. ) ; +#51717 = CARTESIAN_POINT ( 'NONE', ( -15.02627602454272600, 65.88244694415101300, -28.70555803803001600 ) ) ; +#51718 = EDGE_CURVE ( 'NONE', #21026, #13352, #34680, .T. ) ; +#51719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51720 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471826900, 39.13131911501876200, -28.51286550264508800 ) ) ; +#51721 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 20.24660241562189000, -28.20555803802994200 ) ) ; +#51722 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#51723 = EDGE_CURVE ( 'NONE', #8089, #44639, #67759, .T. ) ; +#51724 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#51725 = ADVANCED_FACE ( 'NONE', ( #38518 ), #32704, .F. ) ; +#51726 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#51727 = CARTESIAN_POINT ( 'NONE', ( -19.85875255392921400, 0.2824948921419215800, -21.14446223635266600 ) ) ; +#51728 = EDGE_CURVE ( 'NONE', #70400, #80632, #49218, .T. ) ; +#51729 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 29.16666666666667100, 3.794441961969996900 ) ) ; +#51730 = EDGE_CURVE ( 'NONE', #16677, #59892, #50637, .T. ) ; +#51731 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 87.22261628933227900, -28.70555803803030800 ) ) ; +#51732 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69299, #25811, #1020, #44502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714962482600E-007, 0.0005869108620980679000 ), + .UNSPECIFIED. ) ; +#51733 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51734 = ORIENTED_EDGE ( 'NONE', *, *, #53325, .T. ) ; +#51735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51736 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655695300, 10.17701665379238400, -28.20555803802992800 ) ) ; +#51737 = ORIENTED_EDGE ( 'NONE', *, *, #4343, .F. ) ; +#51738 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 81.65075715145309200, -28.20555803802997400 ) ) ; +#51739 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074337700, 38.31967837323420400, -28.55467576046953900 ) ) ; +#51740 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#51741 = ADVANCED_FACE ( 'NONE', ( #65827 ), #63872, .F. ) ; +#51742 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894378600, 14.05000000000018000, -28.70555803803042500 ) ) ; +#51743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51744 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285728600, 36.92318720225497900, -28.70555803802995200 ) ) ; +#51745 = AXIS2_PLACEMENT_3D ( 'NONE', #39164, #1900, #45396 ) ; +#51746 = EDGE_CURVE ( 'NONE', #55345, #21619, #80413, .T. ) ; +#51747 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51748 = EDGE_CURVE ( 'NONE', #32815, #55473, #1552, .T. ) ; +#51749 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987500, 51.65075715145281500, -28.20555803802997700 ) ) ; +#51750 = EDGE_CURVE ( 'NONE', #20207, #12464, #36206, .T. ) ; +#51751 = CARTESIAN_POINT ( 'NONE', ( -4.446507817027405300, 69.37488905616162100, -28.55192314908415700 ) ) ; +#51752 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 31.28933626866496500, -28.53923937255171600 ) ) ; +#51753 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51754 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45767, #2264, #58317, #21075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521666616300, 0.0009492057883285854100 ), + .UNSPECIFIED. ) ; +#51755 = CIRCLE ( 'NONE', #64816, 9.500000000000099500 ) ; +#51756 = CARTESIAN_POINT ( 'NONE', ( 9.198586935028792800, 94.72249899919930300, -28.20555803802997700 ) ) ; +#51757 = VERTEX_POINT ( 'NONE', #78642 ) ; +#51758 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472516600, 14.04999999999928800, -28.20555803803042500 ) ) ; +#51759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51760 = FACE_OUTER_BOUND ( 'NONE', #9177, .T. ) ; +#51761 = VERTEX_POINT ( 'NONE', #41348 ) ; +#51762 = AXIS2_PLACEMENT_3D ( 'NONE', #61311, #17512, #80047 ) ; +#51763 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.79999999999951400, -28.20555803803047800 ) ) ; +#51764 = FACE_OUTER_BOUND ( 'NONE', #35946, .T. ) ; +#51765 = ORIENTED_EDGE ( 'NONE', *, *, #56183, .F. ) ; +#51766 = ORIENTED_EDGE ( 'NONE', *, *, #32252, .T. ) ; +#51767 = EDGE_LOOP ( 'NONE', ( #20617, #21244, #50307 ) ) ; +#51768 = CARTESIAN_POINT ( 'NONE', ( 16.98603156328920600, 38.86201280598339000, -28.29447340919110900 ) ) ; +#51769 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868677600, 51.58005252438383800, -28.24986299608864800 ) ) ; +#51770 = AXIS2_PLACEMENT_3D ( 'NONE', #70952, #33696, #77214 ) ; +#51771 = ORIENTED_EDGE ( 'NONE', *, *, #37231, .F. ) ; +#51772 = AXIS2_PLACEMENT_3D ( 'NONE', #53703, #66496, #60246 ) ; +#51773 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654445600, 51.32559822014155800, -28.29986836858031700 ) ) ; +#51774 = CARTESIAN_POINT ( 'NONE', ( -17.31587870724581900, 9.623167111090053200, -28.43418176890224600 ) ) ; +#51775 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7314, #50815, #26127, #69610 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850397400, 0.0007596411030283562700 ), + .UNSPECIFIED. ) ; +#51776 = AXIS2_PLACEMENT_3D ( 'NONE', #5624, #49097, #42869 ) ; +#51777 = CONICAL_SURFACE ( 'NONE', #58251, 10.00000000000009200, 0.7853981633974447300 ) ; +#51778 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743593500, 83.66464174796077200, -28.53896444442205600 ) ) ; +#51779 = ORIENTED_EDGE ( 'NONE', *, *, #8112, .F. ) ; +#51780 = CONICAL_SURFACE ( 'NONE', #70728, 10.50000000000009600, 0.7853981633974500600 ) ; +#51781 = ORIENTED_EDGE ( 'NONE', *, *, #51126, .F. ) ; +#51782 = ORIENTED_EDGE ( 'NONE', *, *, #20208, .T. ) ; +#51783 = ORIENTED_EDGE ( 'NONE', *, *, #21984, .T. ) ; +#51784 = ORIENTED_EDGE ( 'NONE', *, *, #73662, .T. ) ; +#51785 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819190700, 89.94924284854670300, -28.20555803802997700 ) ) ; +#51786 = FACE_OUTER_BOUND ( 'NONE', #61686, .T. ) ; +#51787 = EDGE_LOOP ( 'NONE', ( #58892, #38567, #73455, #36599 ) ) ; +#51788 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 0.6666666666666835100, 1.294441961969997200 ) ) ; +#51789 = AXIS2_PLACEMENT_3D ( 'NONE', #71260, #77515, #65032 ) ; +#51790 = EDGE_CURVE ( 'NONE', #57630, #77331, #21758, .T. ) ; +#51791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25096, #62365, #37569, #327 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225884001900E-007, 0.001119324643800057400 ), + .UNSPECIFIED. ) ; +#51792 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 38.97246552159109700, -28.38801640354855500 ) ) ; +#51793 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, 89.63176086632761000, -28.70555803803030800 ) ) ; +#51794 = ORIENTED_EDGE ( 'NONE', *, *, #78023, .T. ) ; +#51795 = ORIENTED_EDGE ( 'NONE', *, *, #1590, .F. ) ; +#51796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51797 = CIRCLE ( 'NONE', #50750, 10.00000000000009400 ) ; +#51798 = ORIENTED_EDGE ( 'NONE', *, *, #55463, .T. ) ; +#51799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51800 = EDGE_CURVE ( 'NONE', #43147, #31088, #7257, .T. ) ; +#51801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51802 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51803 = ADVANCED_FACE ( 'NONE', ( #36600 ), #78477, .F. ) ; +#51804 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#51805 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#51806 = CARTESIAN_POINT ( 'NONE', ( -1.939071942967037300, 10.00000000000003700, -28.70555803802998100 ) ) ; +#51807 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 81.56248377813391000, -28.32723995587616300 ) ) ; +#51808 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807171300, 64.79999999999999700, -28.70555803802997700 ) ) ; +#51809 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310476400, 60.10230989102911500, -28.61774594594330900 ) ) ; +#51810 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999961100, 63.89610994602590200, -28.37519436813230200 ) ) ; +#51811 = AXIS2_PLACEMENT_3D ( 'NONE', #44232, #31789, #62801 ) ; +#51812 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609041800, 14.68533208989813100, -28.53910738522659000 ) ) ; +#51813 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51814 = ADVANCED_FACE ( 'NONE', ( #16178 ), #10892, .T. ) ; +#51815 = ORIENTED_EDGE ( 'NONE', *, *, #65045, .T. ) ; +#51816 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51817 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 41.06914835874665900, -28.45573375118225800 ) ) ; +#51818 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841341200, 18.16349705304836000, -28.30782889147495100 ) ) ; +#51819 = ORIENTED_EDGE ( 'NONE', *, *, #33811, .T. ) ; +#51820 = ADVANCED_FACE ( 'NONE', ( #14219 ), #28870, .T. ) ; +#51821 = AXIS2_PLACEMENT_3D ( 'NONE', #9194, #34240, #21486 ) ; +#51822 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26597, #70069, #32813, #76333 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001119323292485661300 ), + .UNSPECIFIED. ) ; +#51823 = ADVANCED_FACE ( 'NONE', ( #30774 ), #76481, .F. ) ; +#51824 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51825 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428473500, 70.07141756547855500, -28.70555803803030800 ) ) ; +#51826 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51827 = CONICAL_SURFACE ( 'NONE', #75150, 10.00000000000009400, 0.7853981633974447300 ) ; +#51828 = ORIENTED_EDGE ( 'NONE', *, *, #18605, .T. ) ; +#51829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51830 = CONICAL_SURFACE ( 'NONE', #66493, 10.00000000000009200, 0.7853981633974447300 ) ; +#51831 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51833 = EDGE_CURVE ( 'NONE', #35143, #28926, #20083, .T. ) ; +#51832 = ORIENTED_EDGE ( 'NONE', *, *, #40943, .F. ) ; +#51834 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 6.500000000000017800, -7.061964498581022400 ) ) ; +#51835 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#51836 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180657900, 71.65075715145295000, -28.20555803803014100 ) ) ; +#51837 = ORIENTED_EDGE ( 'NONE', *, *, #26893, .T. ) ; +#51838 = CIRCLE ( 'NONE', #57460, 10.50000000000009600 ) ; +#51839 = ORIENTED_EDGE ( 'NONE', *, *, #16977, .T. ) ; +#51840 = ORIENTED_EDGE ( 'NONE', *, *, #20938, .T. ) ; +#51841 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 41.96823913367205700, -28.70555803802997700 ) ) ; +#51842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51844 = CONICAL_SURFACE ( 'NONE', #54565, 10.50000000000009200, 0.7853981633974482800 ) ; +#51845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51846 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67761, #24238, #80259, #42981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815624400800E-007, 0.0007763385940576932300 ), + .UNSPECIFIED. ) ; +#51848 = ORIENTED_EDGE ( 'NONE', *, *, #79304, .T. ) ; +#51849 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 36.94142842854304100, -28.20555803802995200 ) ) ; +#51850 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51851 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943310400, 24.54999999999998600, -28.70555803802994200 ) ) ; +#51852 = EDGE_CURVE ( 'NONE', #39400, #67588, #47275, .T. ) ; +#51853 = CIRCLE ( 'NONE', #7102, 10.00000000000009200 ) ; +#51854 = EDGE_CURVE ( 'NONE', #28207, #30212, #25941, .T. ) ; +#51855 = ORIENTED_EDGE ( 'NONE', *, *, #51040, .F. ) ; +#51856 = ORIENTED_EDGE ( 'NONE', *, *, #47334, .T. ) ; +#51857 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#51858 = VERTEX_POINT ( 'NONE', #73443 ) ; +#51859 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#51860 = ORIENTED_EDGE ( 'NONE', *, *, #76291, .F. ) ; +#51861 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51863 = FACE_OUTER_BOUND ( 'NONE', #28535, .T. ) ; +#51864 = AXIS2_PLACEMENT_3D ( 'NONE', #48721, #54994, #30027 ) ; +#51865 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.49747404049738700, -28.26641963845862200 ) ) ; +#51866 = EDGE_CURVE ( 'NONE', #47710, #12898, #12280, .T. ) ; +#51867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60397, #16862, #29415, #72888 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.908255262090379200E-017, 0.001492013864175925000 ), + .UNSPECIFIED. ) ; +#51868 = CARTESIAN_POINT ( 'NONE', ( -5.100117264795666300, 35.05000000000000400, -28.53808257741933500 ) ) ; +#51869 = EDGE_CURVE ( 'NONE', #10425, #38201, #45305, .T. ) ; +#51870 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 39.69949493661175700, -28.70555803802995200 ) ) ; +#51871 = ORIENTED_EDGE ( 'NONE', *, *, #2781, .F. ) ; +#51872 = EDGE_CURVE ( 'NONE', #25931, #55930, #61923, .T. ) ; +#51873 = AXIS2_PLACEMENT_3D ( 'NONE', #22488, #47455, #10250 ) ; +#51874 = CARTESIAN_POINT ( 'NONE', ( -10.04026895850642200, 30.87561462481246400, -28.30309985153375900 ) ) ; +#51875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51876 = VERTEX_POINT ( 'NONE', #48641 ) ; +#51877 = CONICAL_SURFACE ( 'NONE', #42972, 10.00000000000009200, 0.7853981633974447300 ) ; +#51878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35697, #79491, #17467, #60997 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859795293200E-007, 0.0008759659331885305000 ), + .UNSPECIFIED. ) ; +#51879 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51880 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#51881 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 50.16666666666666400, -6.205558038030004800 ) ) ; +#51882 = AXIS2_PLACEMENT_3D ( 'NONE', #37099, #80643, #43357 ) ; +#51883 = AXIS2_PLACEMENT_3D ( 'NONE', #52369, #77155, #21422 ) ; +#51884 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830849300, 17.95045548864062800, -28.33400579219043900 ) ) ; +#51885 = PLANE ( 'NONE', #41576 ) ; +#51886 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31508, #68759, #25250, #75020, #37721, #471 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001586792886075440300, 0.003173585772150880600 ), + .UNSPECIFIED. ) ; +#51887 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 15.16666666666667300, -9.205558038030003900 ) ) ; +#51888 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.68929190448939400, -28.20555803802997700 ) ) ; +#51889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51890 = CONICAL_SURFACE ( 'NONE', #1800, 10.00000000000009400, 0.7853981633974447300 ) ; +#51891 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390325400, 61.46283204837320100, -28.48697406221674200 ) ) ; +#51892 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 52.50000000000001400, 6.847000845227641200 ) ) ; +#51893 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#51894 = CARTESIAN_POINT ( 'NONE', ( -1.116254736416757000, 35.04999999999997600, -28.53994725305375400 ) ) ; +#51895 = EDGE_LOOP ( 'NONE', ( #43732, #67141, #6226, #1036 ) ) ; +#51896 = AXIS2_PLACEMENT_3D ( 'NONE', #13693, #19931, #50882 ) ; +#51897 = EDGE_CURVE ( 'NONE', #31392, #26055, #73615, .T. ) ; +#51898 = VERTEX_POINT ( 'NONE', #4883 ) ; +#51899 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.66749699759768800, -28.20555803802996700 ) ) ; +#51900 = ORIENTED_EDGE ( 'NONE', *, *, #36422, .F. ) ; +#51901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51902 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655604300, 20.67701665379236100, -28.20555803802994500 ) ) ; +#51903 = FACE_OUTER_BOUND ( 'NONE', #48731, .T. ) ; +#51904 = ORIENTED_EDGE ( 'NONE', *, *, #54311, .F. ) ; +#51905 = CIRCLE ( 'NONE', #44509, 10.00000000000009200 ) ; +#51906 = ORIENTED_EDGE ( 'NONE', *, *, #60752, .F. ) ; +#51907 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343284300, 9.746602415621378400, -28.20555803803042500 ) ) ; +#51908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51909 = EDGE_CURVE ( 'NONE', #29861, #59578, #43383, .T. ) ; +#51910 = FACE_OUTER_BOUND ( 'NONE', #79992, .T. ) ; +#51911 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 70.16749699759751000, -28.20555803803014400 ) ) ; +#51912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51913 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #47766 ) ) ; +#51914 = AXIS2_PLACEMENT_3D ( 'NONE', #43745, #6520, #49999 ) ; +#51915 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846538500, 19.60079448659409700, -28.70555803802994200 ) ) ; +#51916 = VERTEX_POINT ( 'NONE', #55451 ) ; +#51917 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148361800, 34.09761904761934700, -28.70555803802995200 ) ) ; +#51918 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819213700, 71.65075715145309200, -28.20555803802997700 ) ) ; +#51919 = ORIENTED_EDGE ( 'NONE', *, *, #41675, .T. ) ; +#51920 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 33.63556610137281700, -28.54207364681942500 ) ) ; +#51922 = ORIENTED_EDGE ( 'NONE', *, *, #71026, .T. ) ; +#51921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51923 = ADVANCED_FACE ( 'NONE', ( #26871 ), #8328, .F. ) ; +#51924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26354, #38515, #76078, #38794 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002063080595561519900 ), + .UNSPECIFIED. ) ; +#51926 = ADVANCED_FACE ( 'NONE', ( #59975 ), #56033, .T. ) ; +#51927 = CONICAL_SURFACE ( 'NONE', #48204, 10.00000000000009200, 0.7853981633974447300 ) ; +#51928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51929 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 81.25732391202370800, -28.20555803803030800 ) ) ; +#51930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51931 = ORIENTED_EDGE ( 'NONE', *, *, #21443, .F. ) ; +#51932 = AXIS2_PLACEMENT_3D ( 'NONE', #25170, #74949, #74683 ) ; +#51933 = CIRCLE ( 'NONE', #7564, 10.00000000000009600 ) ; +#51934 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 56.00000000000000700, -1.205558038030005300 ) ) ; +#51935 = ORIENTED_EDGE ( 'NONE', *, *, #13784, .F. ) ; +#51936 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.03751622186547400, -28.32723995587591000 ) ) ; +#51937 = CARTESIAN_POINT ( 'NONE', ( 16.57127784838958500, 60.12774695439686200, -28.53061079109362900 ) ) ; +#51938 = ORIENTED_EDGE ( 'NONE', *, *, #73716, .T. ) ; +#51939 = EDGE_LOOP ( 'NONE', ( #38648, #53612, #62653 ) ) ; +#51940 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51941 = ORIENTED_EDGE ( 'NONE', *, *, #49708, .T. ) ; +#51942 = FACE_OUTER_BOUND ( 'NONE', #57663, .T. ) ; +#51943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51944 = AXIS2_PLACEMENT_3D ( 'NONE', #44939, #7703, #51191 ) ; +#51945 = EDGE_LOOP ( 'NONE', ( #32168, #32765, #52013, #68551, #38192, #62406, #11255, #49062 ) ) ; +#51946 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#51947 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51948 = ADVANCED_FACE ( 'NONE', ( #10318 ), #22966, .F. ) ; +#51949 = VERTEX_POINT ( 'NONE', #62010 ) ; +#51950 = ORIENTED_EDGE ( 'NONE', *, *, #68109, .T. ) ; +#51951 = ORIENTED_EDGE ( 'NONE', *, *, #32372, .T. ) ; +#51952 = ORIENTED_EDGE ( 'NONE', *, *, #14640, .T. ) ; +#51953 = CIRCLE ( 'NONE', #47608, 10.50000000000009600 ) ; +#51954 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51955 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 21.16666666666668900, -3.349151577478988200 ) ) ; +#51956 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818954800, 89.94924284854707300, -28.20555803802997700 ) ) ; +#51957 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28886, #66107, #47551, #10335 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.184273249251258800E-005, 0.0007677744771234620900 ), + .UNSPECIFIED. ) ; +#51958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51959 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 28.57141756547892100, -28.70555803802994200 ) ) ; +#51960 = CIRCLE ( 'NONE', #56513, 10.00000000000009600 ) ; +#51961 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#51963 = EDGE_CURVE ( 'NONE', #79232, #8014, #24917, .T. ) ; +#51962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4956, #4425, #61015, #23752 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001707792749031561900 ), + .UNSPECIFIED. ) ; +#51964 = EDGE_LOOP ( 'NONE', ( #71911, #32023, #28688, #53631, #30690 ) ) ; +#51965 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#51966 = EDGE_CURVE ( 'NONE', #65129, #32995, #59133, .T. ) ; +#51967 = VERTEX_POINT ( 'NONE', #74510 ) ; +#51968 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#51969 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180783100, 79.94924284854681700, -28.20555803803030800 ) ) ; +#51970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51971 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 64.66666666666667100, 5.722645192245505700 ) ) ; +#51972 = EDGE_CURVE ( 'NONE', #63854, #75603, #58000, .T. ) ; +#51973 = CONICAL_SURFACE ( 'NONE', #20351, 10.50000000000009600, 0.7853981633974482800 ) ; +#51974 = ORIENTED_EDGE ( 'NONE', *, *, #18878, .F. ) ; +#51975 = AXIS2_PLACEMENT_3D ( 'NONE', #1366, #44854, #7619 ) ; +#51976 = FACE_OUTER_BOUND ( 'NONE', #43254, .T. ) ; +#51977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51978 = ORIENTED_EDGE ( 'NONE', *, *, #19984, .F. ) ; +#51979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51980 = EDGE_LOOP ( 'NONE', ( #65406, #77951, #19730 ) ) ; +#51981 = CIRCLE ( 'NONE', #4196, 9.500000000000099500 ) ; +#51982 = CIRCLE ( 'NONE', #36659, 10.50000000000009600 ) ; +#51983 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#51984 = VERTEX_POINT ( 'NONE', #31002 ) ; +#51985 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51987 = CARTESIAN_POINT ( 'NONE', ( -16.93414660040042100, 11.64286054144891300, -28.51850601323090500 ) ) ; +#51988 = ORIENTED_EDGE ( 'NONE', *, *, #30428, .T. ) ; +#51989 = ORIENTED_EDGE ( 'NONE', *, *, #77852, .F. ) ; +#51990 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#51991 = AXIS2_PLACEMENT_3D ( 'NONE', #2261, #45764, #8515 ) ; +#51992 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#51993 = EDGE_CURVE ( 'NONE', #78197, #67834, #44621, .T. ) ; +#51994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9321, #59108, #3341, #46842 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207975616800E-007, 0.0008724366121409723300 ), + .UNSPECIFIED. ) ; +#51995 = EDGE_CURVE ( 'NONE', #53468, #15529, #72618, .T. ) ; +#51996 = ADVANCED_FACE ( 'NONE', ( #39484 ), #21023, .F. ) ; +#51997 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298227100, 55.79999999999951400, -28.70555803803030800 ) ) ; +#51999 = CONICAL_SURFACE ( 'NONE', #52867, 10.50000000000009600, 0.7853981633974500600 ) ; +#51998 = AXIS2_PLACEMENT_3D ( 'NONE', #13100, #56590, #19323 ) ; +#52000 = CARTESIAN_POINT ( 'NONE', ( -22.81230111663281700, 6.093849441683254900, -24.97820584213212000 ) ) ; +#52001 = EDGE_LOOP ( 'NONE', ( #54462, #13882, #52943 ) ) ; +#52002 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389100, 9.936502946951318200, -28.30782889147480600 ) ) ; +#52004 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 27.00000000000001800, -6.205558038030003100 ) ) ; +#52003 = CIRCLE ( 'NONE', #59685, 10.00000000000009200 ) ; +#52005 = VERTEX_POINT ( 'NONE', #491 ) ; +#52006 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 81.65075715145215400, -28.20555803803047800 ) ) ; +#52007 = CARTESIAN_POINT ( 'NONE', ( 9.621978672527612600, 18.13131911501838900, -28.51286550264558900 ) ) ; +#52008 = VERTEX_POINT ( 'NONE', #43989 ) ; +#52009 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356100, 70.79999999999968500, -28.55171188418412200 ) ) ; +#52010 = ORIENTED_EDGE ( 'NONE', *, *, #29856, .T. ) ; +#52011 = ORIENTED_EDGE ( 'NONE', *, *, #41380, .T. ) ; +#52012 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52013 = ORIENTED_EDGE ( 'NONE', *, *, #56434, .T. ) ; +#52014 = CARTESIAN_POINT ( 'NONE', ( 15.02628644574481400, 55.88243067206804700, -28.70555803803001600 ) ) ; +#52015 = EDGE_CURVE ( 'NONE', #29936, #78784, #37516, .T. ) ; +#52016 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52017 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.65857157145701700, -28.20555803802997700 ) ) ; +#52018 = ADVANCED_FACE ( 'NONE', ( #74552 ), #52106, .F. ) ; +#52019 = FACE_OUTER_BOUND ( 'NONE', #79015, .T. ) ; +#52020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52021 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#52022 = AXIS2_PLACEMENT_3D ( 'NONE', #67168, #29950, #73423 ) ; +#52024 = EDGE_LOOP ( 'NONE', ( #17100, #4301, #11807, #23174 ) ) ; +#52023 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#52025 = AXIS2_PLACEMENT_3D ( 'NONE', #27570, #71061, #33805 ) ; +#52026 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.737967874686777500, -28.38801640354855500 ) ) ; +#52027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40069, #77071, #9042, #52567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108245100, 0.0006040461757766744800 ), + .UNSPECIFIED. ) ; +#52030 = CARTESIAN_POINT ( 'NONE', ( -2.530136888809774400, 9.146957350529797600, -28.66910751791843700 ) ) ; +#52031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52032 = ORIENTED_EDGE ( 'NONE', *, *, #19120, .F. ) ; +#52033 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52034 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52035 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 61.43945992495518000, -28.34042301926893600 ) ) ; +#52036 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820190300, 31.01741414369119100, -28.27509349209129800 ) ) ; +#52037 = EDGE_LOOP ( 'NONE', ( #35163, #29995, #18616, #15459 ) ) ; +#52038 = VECTOR ( 'NONE', #6356, 1000.000000000000000 ) ; +#52039 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153688600, 80.79999999999999700, -28.55171188418376700 ) ) ; +#52040 = AXIS2_PLACEMENT_3D ( 'NONE', #49041, #55317, #61355 ) ; +#52041 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783892300, 80.16749699759736800, -28.23966044827393100 ) ) ; +#52042 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027428400, 52.22511094383838100, -28.55192314908416400 ) ) ; +#52043 = CARTESIAN_POINT ( 'NONE', ( -4.178146130231356300, 93.78469023269130400, -28.46719432058929300 ) ) ; +#52044 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#52045 = CARTESIAN_POINT ( 'NONE', ( -11.95723973586455600, 75.79999999999998300, -28.53819074160683300 ) ) ; +#52046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52047 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 71.08083798124329200, -28.45106778992437700 ) ) ; +#52048 = ADVANCED_FACE ( 'NONE', ( #70633 ), #758, .T. ) ; +#52049 = AXIS2_PLACEMENT_3D ( 'NONE', #45929, #2150, #58477 ) ; +#52050 = CONICAL_SURFACE ( 'NONE', #65800, 10.00000000000009200, 0.7853981633974447300 ) ; +#52051 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3917, #41175, #53688, #16441 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202225457400E-007, 0.0008724366121404680700 ), + .UNSPECIFIED. ) ; +#52052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52053 = ORIENTED_EDGE ( 'NONE', *, *, #29423, .T. ) ; +#52054 = ORIENTED_EDGE ( 'NONE', *, *, #74005, .T. ) ; +#52055 = CIRCLE ( 'NONE', #37414, 10.00000000000009600 ) ; +#52056 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 70.66666666666668600, -5.205558038030003100 ) ) ; +#52057 = AXIS2_PLACEMENT_3D ( 'NONE', #41951, #72987, #4691 ) ; +#52058 = ORIENTED_EDGE ( 'NONE', *, *, #70599, .F. ) ; +#52059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52060 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#52061 = EDGE_CURVE ( 'NONE', #14498, #14526, #68692, .T. ) ; +#52062 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52063 = FACE_OUTER_BOUND ( 'NONE', #34931, .T. ) ; +#52064 = FACE_OUTER_BOUND ( 'NONE', #635, .T. ) ; +#52065 = AXIS2_PLACEMENT_3D ( 'NONE', #28901, #72394, #35130 ) ; +#52066 = ORIENTED_EDGE ( 'NONE', *, *, #55112, .T. ) ; +#52067 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537171500, 60.34267608797603800, -28.20555803802997700 ) ) ; +#52068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52069 = CONICAL_SURFACE ( 'NONE', #77121, 10.50000000000009600, 0.7853981633974500600 ) ; +#52070 = ORIENTED_EDGE ( 'NONE', *, *, #43897, .F. ) ; +#52071 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103800, 59.94924284854708700, -28.20555803802997700 ) ) ; +#52072 = ORIENTED_EDGE ( 'NONE', *, *, #56902, .F. ) ; +#52073 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 9.968680884981219800, -28.51286550264509500 ) ) ; +#52074 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056687800, 24.54999999999998600, -28.70555803802994200 ) ) ; +#52075 = CONICAL_SURFACE ( 'NONE', #40477, 10.00000000000009200, 0.7853981633974415100 ) ; +#52076 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#52077 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 12.49926474563211300, -28.70555803802994200 ) ) ; +#52078 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627434900, 26.43535825203924400, -28.53896444442199300 ) ) ; +#52079 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 42.00000000000001400, -1.205558038030002800 ) ) ; +#52080 = FACE_OUTER_BOUND ( 'NONE', #64391, .T. ) ; +#52081 = ORIENTED_EDGE ( 'NONE', *, *, #6513, .F. ) ; +#52082 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52084 = EDGE_CURVE ( 'NONE', #20286, #40650, #30254, .T. ) ; +#52085 = ORIENTED_EDGE ( 'NONE', *, *, #16993, .T. ) ; +#52086 = ORIENTED_EDGE ( 'NONE', *, *, #62144, .F. ) ; +#52087 = EDGE_CURVE ( 'NONE', #13531, #66170, #41453, .T. ) ; +#52088 = ORIENTED_EDGE ( 'NONE', *, *, #4815, .F. ) ; +#52089 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957538300, 48.50972971738993800, -28.70555803802996700 ) ) ; +#52090 = EDGE_LOOP ( 'NONE', ( #22733, #68118, #80720, #27721, #27979 ) ) ; +#52091 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 41.24660241562189400, -28.20555803802996700 ) ) ; +#52092 = CARTESIAN_POINT ( 'NONE', ( 16.33099763933876100, 25.12682920859831600, -28.62115403300391800 ) ) ; +#52093 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769025300, 40.81139552890385900, -28.53900456328628000 ) ) ; +#52094 = ORIENTED_EDGE ( 'NONE', *, *, #8397, .F. ) ; +#52095 = FACE_OUTER_BOUND ( 'NONE', #13680, .T. ) ; +#52096 = ORIENTED_EDGE ( 'NONE', *, *, #15461, .F. ) ; +#52097 = VERTEX_POINT ( 'NONE', #8369 ) ; +#52098 = EDGE_CURVE ( 'NONE', #59888, #76297, #6408, .T. ) ; +#52099 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15953, #22208, #78238, #40972 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549226006400E-007, 0.0008759529789574131200 ), + .UNSPECIFIED. ) ; +#52100 = ADVANCED_FACE ( 'NONE', ( #35619 ), #17114, .T. ) ; +#52101 = CARTESIAN_POINT ( 'NONE', ( 16.21298987513665700, 94.51407448843710300, -28.27406386184718600 ) ) ; +#52102 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528900, 34.73212903577627500, -28.37244029424741500 ) ) ; +#52103 = EDGE_CURVE ( 'NONE', #20990, #33110, #33649, .T. ) ; +#52104 = ORIENTED_EDGE ( 'NONE', *, *, #64799, .F. ) ; +#52105 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444445400, 89.72166103827299800, -28.53892303408250400 ) ) ; +#52106 = CONICAL_SURFACE ( 'NONE', #52368, 10.50000000000009600, 0.7853981633974500600 ) ; +#52107 = AXIS2_PLACEMENT_3D ( 'NONE', #16462, #47421, #65975 ) ; +#52108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#52110 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 4.333333333333341900, 2.794441961969998300 ) ) ; +#52111 = CARTESIAN_POINT ( 'NONE', ( 17.36059854261447600, 28.66749699759768800, -28.25434854811488300 ) ) ; +#52112 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52114 = ORIENTED_EDGE ( 'NONE', *, *, #31900, .T. ) ; +#52115 = FACE_OUTER_BOUND ( 'NONE', #48889, .T. ) ; +#52116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52117 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783880900, 9.932503002402292200, -28.23966044827352200 ) ) ; +#52118 = ADVANCED_FACE ( 'NONE', ( #50156 ), #48212, .F. ) ; +#52119 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823704200, 48.69543746431602900, -28.61277292027075300 ) ) ; +#52120 = AXIS2_PLACEMENT_3D ( 'NONE', #74418, #24628, #80652 ) ; +#52121 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#52122 = EDGE_CURVE ( 'NONE', #25889, #39407, #15764, .T. ) ; +#52123 = EDGE_CURVE ( 'NONE', #24026, #75158, #1278, .T. ) ; +#52124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52125 = EDGE_CURVE ( 'NONE', #74631, #53914, #66761, .T. ) ; +#52126 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#52127 = CARTESIAN_POINT ( 'NONE', ( -10.63950292779718300, 9.932503002402295800, -28.25438406275896200 ) ) ; +#52128 = AXIS2_PLACEMENT_3D ( 'NONE', #57246, #63268, #20008 ) ; +#52129 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52130 = CONICAL_SURFACE ( 'NONE', #70413, 10.50000000000009600, 0.7853981633974500600 ) ; +#52131 = ADVANCED_FACE ( 'NONE', ( #64824 ), #79402, .T. ) ; +#52132 = CONICAL_SURFACE ( 'NONE', #76458, 10.50000000000009800, 0.7853981633974500600 ) ; +#52133 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 47.44142842854297000, -28.20555803802996700 ) ) ; +#52134 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 75.79999999999999700, -28.63843632546336000 ) ) ; +#52135 = VERTEX_POINT ( 'NONE', #9180 ) ; +#52136 = EDGE_CURVE ( 'NONE', #9705, #63818, #15148, .T. ) ; +#52137 = EDGE_LOOP ( 'NONE', ( #47260, #49990, #66522 ) ) ; +#52138 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507562400, 49.07379779496243100, -28.70555803802996700 ) ) ; +#52139 = CONICAL_SURFACE ( 'NONE', #4565, 10.00000000000009600, 0.7853981633974482800 ) ; +#52140 = AXIS2_PLACEMENT_3D ( 'NONE', #72063, #34798, #78312 ) ; +#52141 = AXIS2_PLACEMENT_3D ( 'NONE', #73957, #36666, #80194 ) ; +#52142 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655983500, 17.92298334620702600, -28.20555803803002000 ) ) ; +#52144 = ORIENTED_EDGE ( 'NONE', *, *, #52696, .F. ) ; +#52143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52145 = CARTESIAN_POINT ( 'NONE', ( 5.216693534803973800, 60.80000000000000400, -28.32841359973442200 ) ) ; +#52146 = ADVANCED_FACE ( 'NONE', ( #4457 ), #29792, .T. ) ; +#52147 = FACE_OUTER_BOUND ( 'NONE', #31931, .T. ) ; +#52148 = CIRCLE ( 'NONE', #26724, 10.00000000000009200 ) ; +#52149 = EDGE_LOOP ( 'NONE', ( #75216, #417, #26284 ) ) ; +#52150 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52151 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714276700, 43.67681279774500800, -28.70555803802997700 ) ) ; +#52153 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52152 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77101, #64617, #70833, #39834 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389896553600E-007, 0.0008082646680357318200 ), + .UNSPECIFIED. ) ; +#52154 = ORIENTED_EDGE ( 'NONE', *, *, #27859, .F. ) ; +#52155 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52156 = ORIENTED_EDGE ( 'NONE', *, *, #58451, .F. ) ; +#52157 = ADVANCED_FACE ( 'NONE', ( #62857 ), #77428, .T. ) ; +#52158 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 48.00000000000000700, 3.794441961969998300 ) ) ; +#52159 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136768100, 17.92958814301760700, -28.27321389036163900 ) ) ; +#52160 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621800, 50.33106028708540700, -28.57333386111662300 ) ) ; +#52161 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999991300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#52162 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 13.00000000000001100, 6.794441961969995200 ) ) ; +#52163 = CIRCLE ( 'NONE', #62188, 9.500000000000099500 ) ; +#52164 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 71.43650294695130800, -28.30782889147482400 ) ) ; +#52165 = ORIENTED_EDGE ( 'NONE', *, *, #35297, .T. ) ; +#52166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52167 = ORIENTED_EDGE ( 'NONE', *, *, #775, .F. ) ; +#52168 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990700, 18.69949493661175700, -28.70555803802992800 ) ) ; +#52169 = ORIENTED_EDGE ( 'NONE', *, *, #20805, .F. ) ; +#52170 = ORIENTED_EDGE ( 'NONE', *, *, #47861, .T. ) ; +#52171 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 50.33333333333332900, -10.73183747965883100 ) ) ; +#52172 = ORIENTED_EDGE ( 'NONE', *, *, #42367, .T. ) ; +#52173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52174 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#52175 = FACE_OUTER_BOUND ( 'NONE', #30766, .T. ) ; +#52176 = CONICAL_SURFACE ( 'NONE', #45687, 10.00000000000009200, 0.7853981633974447300 ) ; +#52177 = AXIS2_PLACEMENT_3D ( 'NONE', #80388, #43102, #5872 ) ; +#52178 = ORIENTED_EDGE ( 'NONE', *, *, #30938, .T. ) ; +#52179 = ORIENTED_EDGE ( 'NONE', *, *, #21879, .T. ) ; +#52180 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344056900, 28.42298334620768300, -28.20555803802994200 ) ) ; +#52181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52182 = FACE_OUTER_BOUND ( 'NONE', #59334, .T. ) ; +#52183 = AXIS2_PLACEMENT_3D ( 'NONE', #23484, #66999, #29768 ) ; +#52184 = ORIENTED_EDGE ( 'NONE', *, *, #41191, .T. ) ; +#52185 = FACE_OUTER_BOUND ( 'NONE', #51945, .T. ) ; +#52186 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52187 = CARTESIAN_POINT ( 'NONE', ( 17.91566597477734400, 60.38589569235276900, -28.27354076558355800 ) ) ; +#52188 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 71.68929190448859900, -28.20555803803030800 ) ) ; +#52189 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 80.10230989102912200, -28.61774594594330900 ) ) ; +#52190 = FACE_OUTER_BOUND ( 'NONE', #19258, .T. ) ; +#52191 = CARTESIAN_POINT ( 'NONE', ( 6.230595343319193600, 50.54999999999999700, -28.45605139793075000 ) ) ; +#52192 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507535400, 29.20543520232828200, -28.70555803802994200 ) ) ; +#52193 = CARTESIAN_POINT ( 'NONE', ( 14.58275556010031700, 50.55000000000000400, -28.44691077104603800 ) ) ; +#52194 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 58.62623792124937700, -28.70555803802997700 ) ) ; +#52195 = ORIENTED_EDGE ( 'NONE', *, *, #59559, .T. ) ; +#52196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52197 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#52198 = EDGE_CURVE ( 'NONE', #14216, #38367, #67622, .T. ) ; +#52199 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 53.83333333333335700, 0.9380355014189731800 ) ) ; +#52200 = CIRCLE ( 'NONE', #10993, 9.500000000000095900 ) ; +#52201 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309789700, 85.79999999999996900, -28.70555803802997700 ) ) ; +#52202 = ORIENTED_EDGE ( 'NONE', *, *, #34017, .F. ) ; +#52203 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50147, #37375, #62709, #25451 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283327358400, 0.0007287255810273091100 ), + .UNSPECIFIED. ) ; +#52205 = EDGE_CURVE ( 'NONE', #25625, #58205, #31713, .T. ) ; +#52206 = CIRCLE ( 'NONE', #64471, 10.50000000000009600 ) ; +#52207 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999972900, 90.16749699759753900, -28.20555803803014400 ) ) ; +#52208 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .T. ) ; +#52209 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48201, #4706, #60769, #23495 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287015068700E-007, 0.0007303759720891763100 ), + .UNSPECIFIED. ) ; +#52210 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .F. ) ; +#52211 = CIRCLE ( 'NONE', #21741, 10.50000000000009200 ) ; +#52212 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019250800, 56.80000000000026000, -28.70555803803047500 ) ) ; +#52213 = ADVANCED_FACE ( 'NONE', ( #2482 ), #27828, .F. ) ; +#52214 = CARTESIAN_POINT ( 'NONE', ( -1.899522206194603800E-013, 84.37738371066706100, -28.70555803802997700 ) ) ; +#52215 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#52216 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026329600, 45.54999999999999700, -28.70555803802996700 ) ) ; +#52217 = EDGE_CURVE ( 'NONE', #28518, #3342, #53149, .T. ) ; +#52218 = PLANE ( 'NONE', #6241 ) ; +#52219 = VERTEX_POINT ( 'NONE', #78014 ) ; +#52220 = EDGE_CURVE ( 'NONE', #33247, #50621, #19043, .T. ) ; +#52221 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78691, #78420, #53905, #16658 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192577297500 ), + .UNSPECIFIED. ) ; +#52222 = CIRCLE ( 'NONE', #50928, 10.00000000000009600 ) ; +#52223 = CONICAL_SURFACE ( 'NONE', #18838, 10.00000000000009400, 0.7853981633974447300 ) ; +#52224 = ORIENTED_EDGE ( 'NONE', *, *, #25710, .T. ) ; +#52225 = EDGE_CURVE ( 'NONE', #56941, #17105, #38655, .T. ) ; +#52226 = ADVANCED_FACE ( 'NONE', ( #46251 ), #58927, .F. ) ; +#52227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52228 = ADVANCED_FACE ( 'NONE', ( #13226 ), #41280, .T. ) ; +#52229 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 19.00000000000001100, -1.205558038030005300 ) ) ; +#52230 = ORIENTED_EDGE ( 'NONE', *, *, #58249, .T. ) ; +#52231 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 90.13716795162659400, -28.48697406221667400 ) ) ; +#52232 = AXIS2_PLACEMENT_3D ( 'NONE', #55092, #17852, #61395 ) ; +#52233 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75001, #69008, #6977, #50467 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649374478900E-007, 0.0007596411030283389300 ), + .UNSPECIFIED. ) ; +#52234 = EDGE_CURVE ( 'NONE', #44639, #38499, #24236, .T. ) ; +#52235 = EDGE_CURVE ( 'NONE', #33855, #27088, #9785, .T. ) ; +#52236 = EDGE_CURVE ( 'NONE', #5301, #65615, #76077, .T. ) ; +#52237 = ADVANCED_FACE ( 'NONE', ( #75480 ), #9275, .T. ) ; +#52238 = FACE_OUTER_BOUND ( 'NONE', #17486, .T. ) ; +#52239 = ORIENTED_EDGE ( 'NONE', *, *, #72333, .T. ) ; +#52240 = AXIS2_PLACEMENT_3D ( 'NONE', #63859, #26601, #70075 ) ; +#52241 = ORIENTED_EDGE ( 'NONE', *, *, #6445, .T. ) ; +#52242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52243 = ORIENTED_EDGE ( 'NONE', *, *, #40222, .F. ) ; +#52244 = ORIENTED_EDGE ( 'NONE', *, *, #62860, .T. ) ; +#52245 = ORIENTED_EDGE ( 'NONE', *, *, #26914, .F. ) ; +#52246 = CARTESIAN_POINT ( 'NONE', ( 3.757024425534582600, 70.16517473503392900, -28.29551658696708200 ) ) ; +#52247 = CONICAL_SURFACE ( 'NONE', #40613, 10.00000000000009400, 0.7853981633974447300 ) ; +#52248 = AXIS2_PLACEMENT_3D ( 'NONE', #36818, #80348, #43070 ) ; +#52249 = AXIS2_PLACEMENT_3D ( 'NONE', #13593, #44784, #7548 ) ; +#52250 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#52251 = EDGE_LOOP ( 'NONE', ( #37101, #59700, #52360 ) ) ; +#52252 = EDGE_LOOP ( 'NONE', ( #22834, #19335, #59572, #78303, #38873 ) ) ; +#52253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79983, #42151, #11457, #42688 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572533109300E-007, 0.0007596410370205456200 ), + .UNSPECIFIED. ) ; +#52255 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148544600, 25.50238095238091800, -28.70555803802994200 ) ) ; +#52256 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428613500, 67.92318720225486600, -28.70555803803047500 ) ) ; +#52257 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 62.50000000000001400, -7.061964498581022400 ) ) ; +#52258 = FACE_OUTER_BOUND ( 'NONE', #78764, .T. ) ; +#52259 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929813600, 85.79999999999950000, -28.70555803803047500 ) ) ; +#52260 = CARTESIAN_POINT ( 'NONE', ( 3.628581783286455800, 60.16749699759768800, -28.25056166218023500 ) ) ; +#52261 = ORIENTED_EDGE ( 'NONE', *, *, #62824, .T. ) ; +#52262 = ORIENTED_EDGE ( 'NONE', *, *, #70476, .F. ) ; +#52263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52265 = FACE_OUTER_BOUND ( 'NONE', #3794, .T. ) ; +#52266 = AXIS2_PLACEMENT_3D ( 'NONE', #6673, #50165, #12958 ) ; +#52267 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.43250300240229200, -28.20555803802997700 ) ) ; +#52268 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#52269 = ORIENTED_EDGE ( 'NONE', *, *, #18191, .F. ) ; +#52270 = CARTESIAN_POINT ( 'NONE', ( 16.99797853026624100, 28.78907435382948800, -28.25433648786264500 ) ) ; +#52271 = CARTESIAN_POINT ( 'NONE', ( -3.040268958506421500, 41.37561462481247100, -28.30309985153377300 ) ) ; +#52272 = CARTESIAN_POINT ( 'NONE', ( -18.94831813611718700, 6.051681863885525200, -27.98939727084248100 ) ) ; +#52273 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274707600, 35.05000000000000400, -28.20555803802995200 ) ) ; +#52274 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 24.83333333333334600, 3.794441961969996900 ) ) ; +#52275 = CIRCLE ( 'NONE', #71386, 10.50000000000009600 ) ; +#52276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52277 = ORIENTED_EDGE ( 'NONE', *, *, #24863, .T. ) ; +#52278 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725815800, 67.93535825203886700, -28.53896444442219900 ) ) ; +#52279 = EDGE_CURVE ( 'NONE', #5741, #39774, #61654, .T. ) ; +#52280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52281 = AXIS2_PLACEMENT_3D ( 'NONE', #29512, #73009, #35735 ) ; +#52282 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155507000, 75.46616414991814300, -28.37247596307107900 ) ) ; +#52283 = ORIENTED_EDGE ( 'NONE', *, *, #53913, .T. ) ; +#52284 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.79999999999999700, -28.20555803802997700 ) ) ; +#52285 = CONICAL_SURFACE ( 'NONE', #73809, 10.50000000000009600, 0.7853981633974500600 ) ; +#52286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52287 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188353800, 49.70564881207761900, -28.41114655922299900 ) ) ; +#52288 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#52289 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#52290 = CARTESIAN_POINT ( 'NONE', ( 11.00202449666891300, 28.78907889423219000, -28.25433304472392500 ) ) ; +#52291 = VERTEX_POINT ( 'NONE', #79106 ) ; +#52292 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52293 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782523800, 51.43945992495533700, -28.34042301926881500 ) ) ; +#52294 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52295 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52296 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52297 = AXIS2_PLACEMENT_3D ( 'NONE', #23927, #42644, #5412 ) ; +#52298 = VECTOR ( 'NONE', #46906, 1000.000000000000000 ) ; +#52299 = ORIENTED_EDGE ( 'NONE', *, *, #3036, .T. ) ; +#52300 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.68929190448939400, -28.20555803802997700 ) ) ; +#52301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52302 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 70.23237991241897800, -28.26633708900912700 ) ) ; +#52303 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922502800, 71.50962196508493200, -28.29483400905892100 ) ) ; +#52304 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571488300, 71.52858243452088500, -28.70555803803014400 ) ) ; +#52305 = ORIENTED_EDGE ( 'NONE', *, *, #56107, .T. ) ; +#52306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52307 = AXIS2_PLACEMENT_3D ( 'NONE', #31144, #55857, #55592 ) ; +#52308 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 89.94924284854654700, -28.20555803803014400 ) ) ; +#52309 = PLANE ( 'NONE', #73452 ) ; +#52310 = CONICAL_SURFACE ( 'NONE', #30137, 10.50000000000009600, 0.7853981633974518300 ) ; +#52311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41573, #78873, #47797, #10577 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353238365000E-007, 0.0007670609591623401200 ), + .UNSPECIFIED. ) ; +#52312 = CIRCLE ( 'NONE', #4741, 10.00000000000009600 ) ; +#52313 = ORIENTED_EDGE ( 'NONE', *, *, #14971, .F. ) ; +#52314 = ORIENTED_EDGE ( 'NONE', *, *, #78752, .T. ) ; +#52315 = EDGE_CURVE ( 'NONE', #17172, #80528, #11271, .T. ) ; +#52316 = ORIENTED_EDGE ( 'NONE', *, *, #74074, .T. ) ; +#52317 = ORIENTED_EDGE ( 'NONE', *, *, #69278, .T. ) ; +#52318 = EDGE_LOOP ( 'NONE', ( #67213, #62051, #67244, #31000 ) ) ; +#52319 = ORIENTED_EDGE ( 'NONE', *, *, #65533, .F. ) ; +#52320 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571390300, 83.67681279774493000, -28.70555803803047500 ) ) ; +#52321 = ADVANCED_FACE ( 'NONE', ( #44286 ), #40431, .T. ) ; +#52322 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 68.50000000000002800, 4.650848422521012700 ) ) ; +#52323 = ORIENTED_EDGE ( 'NONE', *, *, #45109, .T. ) ; +#52324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38098, #844, #56891, #19634 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721182100, 0.0008252574424209039800 ), + .UNSPECIFIED. ) ; +#52325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52326 = CARTESIAN_POINT ( 'NONE', ( -3.535187653982936800, 9.406791769321969800, -28.68794773163825000 ) ) ; +#52327 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#52328 = ADVANCED_FACE ( 'NONE', ( #60914 ), #7318, .F. ) ; +#52329 = EDGE_LOOP ( 'NONE', ( #21565, #41925, #29998, #31588 ) ) ; +#52330 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286485300, 72.66699492863728000, -28.67024809316606600 ) ) ; +#52331 = LINE ( 'NONE', #14326, #17333 ) ; +#52332 = VERTEX_POINT ( 'NONE', #11100 ) ; +#52333 = EDGE_CURVE ( 'NONE', #12163, #39296, #23916, .T. ) ; +#52335 = EDGE_CURVE ( 'NONE', #24257, #69393, #25864, .T. ) ; +#52334 = VERTEX_POINT ( 'NONE', #60881 ) ; +#52336 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719846000, 60.69966441803892100, -28.70555803802997700 ) ) ; +#52337 = CARTESIAN_POINT ( 'NONE', ( 2.133709875451472700E-013, 88.62623792124918500, -28.70555803802997700 ) ) ; +#52338 = VERTEX_POINT ( 'NONE', #42339 ) ; +#52339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3573, #40852, #22359, #65900 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082138959800E-007, 0.0007679735311067960500 ), + .UNSPECIFIED. ) ; +#52340 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046900, 70.36203212531218300, -28.38801640354843100 ) ) ; +#52341 = CONICAL_SURFACE ( 'NONE', #43264, 10.50000000000009600, 0.7853981633974500600 ) ; +#52342 = AXIS2_PLACEMENT_3D ( 'NONE', #71415, #34157, #77670 ) ; +#52343 = EDGE_CURVE ( 'NONE', #2995, #53959, #47139, .T. ) ; +#52344 = EDGE_CURVE ( 'NONE', #38695, #33554, #32701, .T. ) ; +#52345 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52346 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63395, #51082, #13881, #57384 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210814600, 0.001517199873936111100 ), + .UNSPECIFIED. ) ; +#52347 = EDGE_CURVE ( 'NONE', #68343, #36616, #18247, .T. ) ; +#52349 = ORIENTED_EDGE ( 'NONE', *, *, #58180, .T. ) ; +#52348 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#52350 = ADVANCED_FACE ( 'NONE', ( #529 ), #21945, .T. ) ; +#52351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52353 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 39.83333333333335000, -4.152999154772353500 ) ) ; +#52354 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540386100, 59.08026449164324800, -28.70555803803019800 ) ) ; +#52355 = AXIS2_PLACEMENT_3D ( 'NONE', #69662, #75916, #26178 ) ; +#52356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52357 = CARTESIAN_POINT ( 'NONE', ( 10.92650815748483400, 90.22161678501160500, -28.29547179040472600 ) ) ; +#52358 = CARTESIAN_POINT ( 'NONE', ( 16.68942240455986700, 54.52391587796468300, -28.56336785413094900 ) ) ; +#52359 = CONICAL_SURFACE ( 'NONE', #76031, 10.00000000000009200, 0.7853981633974447300 ) ; +#52360 = ORIENTED_EDGE ( 'NONE', *, *, #28542, .T. ) ; +#52361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52362 = ORIENTED_EDGE ( 'NONE', *, *, #42459, .T. ) ; +#52363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52364 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#52365 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455603400, 81.87833896172621500, -28.53892303408260000 ) ) ; +#52366 = AXIS2_PLACEMENT_3D ( 'NONE', #70421, #2136, #26941 ) ; +#52367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52368 = AXIS2_PLACEMENT_3D ( 'NONE', #56528, #13043, #19273 ) ; +#52369 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#52370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52371 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 57.22261628933269900, -28.70555803802997700 ) ) ; +#52372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52373 = FACE_OUTER_BOUND ( 'NONE', #57600, .T. ) ; +#52374 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 2.166666666666683400, -3.349151577478988200 ) ) ; +#52375 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52377 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#52378 = VERTEX_POINT ( 'NONE', #36625 ) ; +#52379 = VERTEX_POINT ( 'NONE', #80158 ) ; +#52380 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 65.79999999999998300, -28.20555803802997700 ) ) ; +#52381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52383 = AXIS2_PLACEMENT_3D ( 'NONE', #61029, #23760, #67259 ) ; +#52384 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#52385 = EDGE_CURVE ( 'NONE', #49871, #69297, #55029, .T. ) ; +#52386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8825, #77134, #58635, #21398 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003632803484388649000, 0.0005093674608222693900 ), + .UNSPECIFIED. ) ; +#52388 = CONICAL_SURFACE ( 'NONE', #43067, 10.50000000000009600, 0.7853981633974500600 ) ; +#52389 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 55.79999999999999000, -28.20555803802997700 ) ) ; +#52390 = ORIENTED_EDGE ( 'NONE', *, *, #10916, .F. ) ; +#52391 = CONICAL_SURFACE ( 'NONE', #52626, 10.50000000000009600, 0.7853981633974500600 ) ; +#52392 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#52393 = ORIENTED_EDGE ( 'NONE', *, *, #75781, .F. ) ; +#52394 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#52395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52396 = ORIENTED_EDGE ( 'NONE', *, *, #65557, .F. ) ; +#52397 = CARTESIAN_POINT ( 'NONE', ( -10.37150777124396100, 71.43250300240228500, -28.25053031809458700 ) ) ; +#52398 = EDGE_LOOP ( 'NONE', ( #54676, #3485, #60679, #31315 ) ) ; +#52399 = EDGE_CURVE ( 'NONE', #5570, #64775, #3768, .T. ) ; +#52400 = CONICAL_SURFACE ( 'NONE', #74694, 10.50000000000009600, 0.7853981633974500600 ) ; +#52401 = ORIENTED_EDGE ( 'NONE', *, *, #77873, .F. ) ; +#52402 = AXIS2_PLACEMENT_3D ( 'NONE', #13496, #50703, #57002 ) ; +#52403 = ORIENTED_EDGE ( 'NONE', *, *, #79688, .T. ) ; +#52404 = ORIENTED_EDGE ( 'NONE', *, *, #59163, .F. ) ; +#52405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52406 = ORIENTED_EDGE ( 'NONE', *, *, #35383, .T. ) ; +#52407 = ORIENTED_EDGE ( 'NONE', *, *, #5498, .T. ) ; +#52408 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 81.25732391202397800, -28.20555803802997700 ) ) ; +#52409 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 51.43250300240198000, -28.20555803803047800 ) ) ; +#52410 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823699600, 21.40456253568400800, -28.61277292027076100 ) ) ; +#52411 = ORIENTED_EDGE ( 'NONE', *, *, #5315, .F. ) ; +#52412 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52413 = ADVANCED_FACE ( 'NONE', ( #71594 ), #53066, .F. ) ; +#52414 = FACE_OUTER_BOUND ( 'NONE', #53983, .T. ) ; +#52416 = ORIENTED_EDGE ( 'NONE', *, *, #71845, .F. ) ; +#52415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52417 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#52418 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#52419 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 11.50000000000000500, 6.847000845227646500 ) ) ; +#52420 = ORIENTED_EDGE ( 'NONE', *, *, #2568, .T. ) ; +#52421 = ORIENTED_EDGE ( 'NONE', *, *, #75710, .T. ) ; +#52422 = VERTEX_POINT ( 'NONE', #49377 ) ; +#52423 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#52424 = FACE_OUTER_BOUND ( 'NONE', #2674, .T. ) ; +#52425 = ADVANCED_FACE ( 'NONE', ( #56997 ), #38453, .T. ) ; +#52426 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 45.83333333333334300, -6.205558038030004800 ) ) ; +#52427 = AXIS2_PLACEMENT_3D ( 'NONE', #28035, #71521, #34253 ) ; +#52428 = ORIENTED_EDGE ( 'NONE', *, *, #74686, .F. ) ; +#52429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52431 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-014, 12.15857157145694100, -28.20555803802994200 ) ) ; +#52430 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40453, #77724, #52955, #15722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002317346715406824000, 0.0006984166105176762300 ), + .UNSPECIFIED. ) ; +#52432 = ORIENTED_EDGE ( 'NONE', *, *, #45288, .F. ) ; +#52433 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052153600, 90.28233213024645900, -28.25051428653848300 ) ) ; +#52434 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 10.83333333333335200, -9.205558038030003900 ) ) ; +#52435 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000003700, 11.93454006867175300, -28.70555803802998100 ) ) ; +#52436 = EDGE_CURVE ( 'NONE', #30178, #70620, #70084, .T. ) ; +#52437 = CONICAL_SURFACE ( 'NONE', #16597, 10.00000000000009200, 0.7853981633974447300 ) ; +#52438 = ORIENTED_EDGE ( 'NONE', *, *, #8016, .F. ) ; +#52439 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52440 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610913000, 70.49763722318499500, -28.32100408376067300 ) ) ; +#52441 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 48.16666666666667900, 9.794441961969994300 ) ) ; +#52442 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63900, #70389, #76641, #39370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001333132141653023200 ), + .UNSPECIFIED. ) ; +#52443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52444 = ORIENTED_EDGE ( 'NONE', *, *, #41774, .F. ) ; +#52445 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#52446 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.87705528805140900, -28.20555803802994200 ) ) ; +#52447 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52448 = CARTESIAN_POINT ( 'NONE', ( -17.24374921994469300, 70.98711723699935300, -28.45058723417198400 ) ) ; +#52449 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 90.10230989102912200, -28.61774594594330900 ) ) ; +#52450 = ADVANCED_FACE ( 'NONE', ( #73547 ), #67689, .T. ) ; +#52451 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.66749699759768100, -28.20555803802996700 ) ) ; +#52452 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609813600, 61.46283204837369900, -28.48697406221627300 ) ) ; +#52453 = EDGE_CURVE ( 'NONE', #53826, #79198, #3424, .T. ) ; +#52454 = FACE_OUTER_BOUND ( 'NONE', #31914, .T. ) ; +#52455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#52456 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 85.79999999999998300, -28.70555803802997700 ) ) ; +#52457 = FACE_OUTER_BOUND ( 'NONE', #26540, .T. ) ; +#52458 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#52459 = EDGE_CURVE ( 'NONE', #58204, #53919, #42370, .T. ) ; +#52460 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#52461 = EDGE_LOOP ( 'NONE', ( #70735, #45191, #50002 ) ) ; +#52462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52464 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#52465 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#52466 = AXIS2_PLACEMENT_3D ( 'NONE', #15280, #59050, #9261 ) ; +#52467 = ORIENTED_EDGE ( 'NONE', *, *, #27738, .F. ) ; +#52468 = EDGE_CURVE ( 'NONE', #51121, #24535, #55629, .T. ) ; +#52469 = CIRCLE ( 'NONE', #68598, 10.00000000000009200 ) ; +#52470 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388100, 20.43650294695131500, -28.30782889147481300 ) ) ; +#52472 = EDGE_LOOP ( 'NONE', ( #786, #66646, #61496, #9819 ) ) ; +#52471 = EDGE_CURVE ( 'NONE', #66366, #18101, #20012, .T. ) ; +#52473 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492447900, 28.07379779496243100, -28.70555803802995200 ) ) ; +#52474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52475 = FACE_OUTER_BOUND ( 'NONE', #75070, .T. ) ; +#52476 = ORIENTED_EDGE ( 'NONE', *, *, #25496, .T. ) ; +#52477 = AXIS2_PLACEMENT_3D ( 'NONE', #23566, #67081, #29864 ) ; +#52478 = ORIENTED_EDGE ( 'NONE', *, *, #42827, .T. ) ; +#52479 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 51.66666666666667900, -5.205558038030003100 ) ) ; +#52480 = ORIENTED_EDGE ( 'NONE', *, *, #55335, .T. ) ; +#52481 = FACE_OUTER_BOUND ( 'NONE', #70386, .T. ) ; +#52482 = ORIENTED_EDGE ( 'NONE', *, *, #66217, .T. ) ; +#52483 = ORIENTED_EDGE ( 'NONE', *, *, #42227, .T. ) ; +#52484 = EDGE_LOOP ( 'NONE', ( #34447, #26237, #11670 ) ) ; +#52485 = ORIENTED_EDGE ( 'NONE', *, *, #53811, .F. ) ; +#52486 = EDGE_LOOP ( 'NONE', ( #11708, #15744, #26979, #13053, #46708, #28223, #65977 ) ) ; +#52487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52488 = AXIS2_PLACEMENT_3D ( 'NONE', #64660, #77137, #39879 ) ; +#52489 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 24.54999999999997600, -28.20555803802994200 ) ) ; +#52490 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 45.33333333333334300, 5.722645192245503900 ) ) ; +#52492 = EDGE_LOOP ( 'NONE', ( #35505, #75059, #71574, #56919, #2016 ) ) ; +#52491 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52493 = AXIS2_PLACEMENT_3D ( 'NONE', #79682, #67179, #48640 ) ; +#52494 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52495 = EDGE_CURVE ( 'NONE', #67880, #51898, #36525, .T. ) ; +#52496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46014, #2235, #15038, #58553 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002681079286021495600, 0.0005869108620977475200 ), + .UNSPECIFIED. ) ; +#52497 = EDGE_CURVE ( 'NONE', #10634, #77660, #5401, .T. ) ; +#52498 = AXIS2_PLACEMENT_3D ( 'NONE', #58090, #27108, #14579 ) ; +#52499 = EDGE_LOOP ( 'NONE', ( #79103, #77381, #49192 ) ) ; +#52500 = LINE ( 'NONE', #23621, #19432 ) ; +#52501 = PLANE ( 'NONE', #25403 ) ; +#52502 = ORIENTED_EDGE ( 'NONE', *, *, #44614, .F. ) ; +#52503 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 47.33333333333333600, -8.133761268305512700 ) ) ; +#52504 = ORIENTED_EDGE ( 'NONE', *, *, #49943, .F. ) ; +#52505 = ORIENTED_EDGE ( 'NONE', *, *, #65548, .F. ) ; +#52506 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992500, 49.84510448120794000, -28.37193179497695900 ) ) ; +#52507 = EDGE_LOOP ( 'NONE', ( #14070, #72147, #66961, #39030 ) ) ; +#52508 = VERTEX_POINT ( 'NONE', #74975 ) ; +#52509 = FACE_OUTER_BOUND ( 'NONE', #55476, .T. ) ; +#52510 = EDGE_CURVE ( 'NONE', #14550, #12163, #41176, .T. ) ; +#52511 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 16.83333333333335000, 0.9380355014189731800 ) ) ; +#52512 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265455600, 90.27440177985818100, -28.29986836858018500 ) ) ; +#52513 = AXIS2_PLACEMENT_3D ( 'NONE', #34382, #40353, #27893 ) ; +#52514 = ORIENTED_EDGE ( 'NONE', *, *, #237, .F. ) ; +#52515 = AXIS2_PLACEMENT_3D ( 'NONE', #6468, #50222, #43702 ) ; +#52516 = CARTESIAN_POINT ( 'NONE', ( 15.42159809000408500, 17.69142961419011000, -28.69910740970343000 ) ) ; +#52517 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 70.37705528805136600, -28.20555803802997700 ) ) ; +#52518 = ORIENTED_EDGE ( 'NONE', *, *, #38811, .T. ) ; +#52519 = ADVANCED_FACE ( 'NONE', ( #69613 ), #32630, .F. ) ; +#52520 = CIRCLE ( 'NONE', #21254, 10.50000000000009600 ) ; +#52522 = ORIENTED_EDGE ( 'NONE', *, *, #49475, .F. ) ; +#52521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52523 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3713, #78559, #72560, #35304 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560437700, 0.003631405919786774000 ), + .UNSPECIFIED. ) ; +#52524 = ORIENTED_EDGE ( 'NONE', *, *, #28153, .F. ) ; +#52525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52526 = ORIENTED_EDGE ( 'NONE', *, *, #44263, .F. ) ; +#52527 = ADVANCED_FACE ( 'NONE', ( #51079 ), #44179, .T. ) ; +#52528 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 20.16666666666667500, 0.1341879241256129200 ) ) ; +#52529 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034400, 18.15930907398619400, -28.35186440610855000 ) ) ; +#52530 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#52531 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52532 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 60.33333333333334300, 2.794441961969998300 ) ) ; +#52533 = AXIS2_PLACEMENT_3D ( 'NONE', #62154, #49862, #12657 ) ; +#52534 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#52535 = CONICAL_SURFACE ( 'NONE', #9380, 10.50000000000009600, 0.7853981633974482800 ) ; +#52536 = ADVANCED_FACE ( 'NONE', ( #49150 ), #63797, .T. ) ; +#52537 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 70.51916201875668800, -28.45106778992437700 ) ) ; +#52538 = ORIENTED_EDGE ( 'NONE', *, *, #25608, .F. ) ; +#52539 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35562, #72807, #4523, #48003, #10791, #54285 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 6.071532165918824800E-018, 0.001942186938636038100, 0.003884373877272070100 ), + .UNSPECIFIED. ) ; +#52540 = ORIENTED_EDGE ( 'NONE', *, *, #68104, .F. ) ; +#52541 = CARTESIAN_POINT ( 'NONE', ( 4.239894507328262600, 79.66414768974007600, -28.38420446581323700 ) ) ; +#52542 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390048300, 70.13716795162662300, -28.48697406221649700 ) ) ; +#52543 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#52544 = CARTESIAN_POINT ( 'NONE', ( 9.821853869768640200, 93.78469023269130400, -28.46719432058929300 ) ) ; +#52545 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543028500, 70.23522516708057100, -28.27573853395030300 ) ) ; +#52546 = AXIS2_PLACEMENT_3D ( 'NONE', #57846, #20594, #64133 ) ; +#52547 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999974200, 79.98922577050328200, -28.37255355648648000 ) ) ; +#52548 = ADVANCED_FACE ( 'NONE', ( #16098 ), #30698, .T. ) ; +#52549 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 67.60073525436787600, -28.70555803802999500 ) ) ; +#52550 = EDGE_CURVE ( 'NONE', #14133, #53468, #47191, .T. ) ; +#52551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52552 = FACE_OUTER_BOUND ( 'NONE', #1922, .T. ) ; +#52553 = ORIENTED_EDGE ( 'NONE', *, *, #31698, .F. ) ; +#52554 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52555 = ORIENTED_EDGE ( 'NONE', *, *, #77072, .T. ) ; +#52556 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 22.66666666666668200, -5.535685056952199400 ) ) ; +#52557 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898060700, 20.21894733120734600, -28.33409528117008900 ) ) ; +#52558 = FACE_OUTER_BOUND ( 'NONE', #59494, .T. ) ; +#52559 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#52560 = VERTEX_POINT ( 'NONE', #69255 ) ; +#52561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52562 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#52563 = ORIENTED_EDGE ( 'NONE', *, *, #7437, .F. ) ; +#52564 = ORIENTED_EDGE ( 'NONE', *, *, #2110, .T. ) ; +#52565 = VERTEX_POINT ( 'NONE', #19757 ) ; +#52566 = EDGE_LOOP ( 'NONE', ( #56896, #39846, #54381, #43605 ) ) ; +#52567 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432854400, 39.35339758437810100, -28.20555803802995200 ) ) ; +#52568 = ORIENTED_EDGE ( 'NONE', *, *, #1713, .T. ) ; +#52569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52570 = ADVANCED_FACE ( 'NONE', ( #1478 ), #14141, .T. ) ; +#52571 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52572 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 37.17143691309409100, -28.36981695106778300 ) ) ; +#52573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52574 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198457300, 90.69966441803890700, -28.70555803802997700 ) ) ; +#52575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52576 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#52577 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49342, #5876, #61914, #24631 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674960996100E-007, 0.0007987728781051806900 ), + .UNSPECIFIED. ) ; +#52578 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#52579 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52580 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463500, 80.22161678501181800, -28.29547179040443800 ) ) ; +#52581 = FACE_OUTER_BOUND ( 'NONE', #36213, .T. ) ; +#52583 = EDGE_CURVE ( 'NONE', #76219, #5301, #80330, .T. ) ; +#52582 = ORIENTED_EDGE ( 'NONE', *, *, #40010, .F. ) ; +#52584 = PLANE ( 'NONE', #74227 ) ; +#52585 = ORIENTED_EDGE ( 'NONE', *, *, #15114, .F. ) ; +#52586 = ORIENTED_EDGE ( 'NONE', *, *, #76326, .F. ) ; +#52587 = EDGE_CURVE ( 'NONE', #4061, #21332, #65749, .T. ) ; +#52588 = ORIENTED_EDGE ( 'NONE', *, *, #4361, .F. ) ; +#52589 = EDGE_LOOP ( 'NONE', ( #4083, #23246, #59617, #53830, #27410, #3904, #35847, #30536 ) ) ; +#52590 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#52591 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 50.19949493661175700, -28.70555803802996700 ) ) ; +#52592 = VECTOR ( 'NONE', #67465, 1000.000000000000000 ) ; +#52593 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280409800, 63.65857157145700300, -28.37229765499284500 ) ) ; +#52594 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576918600, 35.05000000000000400, -28.65220501466659200 ) ) ; +#52595 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52596 = EDGE_LOOP ( 'NONE', ( #78465, #47199, #2061 ) ) ; +#52597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52598 = EDGE_CURVE ( 'NONE', #14357, #27795, #34606, .T. ) ; +#52599 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#52600 = EDGE_CURVE ( 'NONE', #214, #61971, #26743, .T. ) ; +#52601 = AXIS2_PLACEMENT_3D ( 'NONE', #5525, #11792, #55277 ) ; +#52602 = CIRCLE ( 'NONE', #25902, 10.50000000000009800 ) ; +#52603 = ORIENTED_EDGE ( 'NONE', *, *, #3820, .F. ) ; +#52604 = VERTEX_POINT ( 'NONE', #1234 ) ; +#52605 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736714400, 45.55000000000000400, -28.70555803802996700 ) ) ; +#52606 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 66.33333333333334300, -8.133761268305512700 ) ) ; +#52607 = AXIS2_PLACEMENT_3D ( 'NONE', #52732, #40221, #77504 ) ; +#52608 = EDGE_CURVE ( 'NONE', #9324, #59476, #12276, .T. ) ; +#52609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52610 = EDGE_CURVE ( 'NONE', #8948, #58003, #61854, .T. ) ; +#52611 = EDGE_CURVE ( 'NONE', #69758, #15380, #78603, .T. ) ; +#52612 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567142500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#52613 = AXIS2_PLACEMENT_3D ( 'NONE', #16381, #59906, #22635 ) ; +#52614 = CARTESIAN_POINT ( 'NONE', ( -1.283695372222837200E-013, 15.94142842854310700, -28.20555803802992800 ) ) ; +#52615 = AXIS2_PLACEMENT_3D ( 'NONE', #72991, #79248, #16961 ) ; +#52616 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049487900, 17.69228657120662600, -28.53891855580004800 ) ) ; +#52617 = EDGE_LOOP ( 'NONE', ( #21492, #32832, #38024 ) ) ; +#52618 = ORIENTED_EDGE ( 'NONE', *, *, #8638, .T. ) ; +#52619 = AXIS2_PLACEMENT_3D ( 'NONE', #26456, #7906, #38905 ) ; +#52620 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9043, #65135, #3067, #46565 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.060883542877794500E-017, 0.001492013864175162100 ), + .UNSPECIFIED. ) ; +#52621 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841392000, 18.16349705304866200, -28.30782889147480200 ) ) ; +#52622 = VERTEX_POINT ( 'NONE', #50980 ) ; +#52623 = EDGE_CURVE ( 'NONE', #6607, #71810, #64146, .T. ) ; +#52624 = ADVANCED_FACE ( 'NONE', ( #18048 ), #45405, .F. ) ; +#52625 = AXIS2_PLACEMENT_3D ( 'NONE', #69708, #32447, #75961 ) ; +#52626 = AXIS2_PLACEMENT_3D ( 'NONE', #33702, #39958, #27471 ) ; +#52627 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181928500, 59.94924284854760500, -28.20555803803014400 ) ) ; +#52628 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533315700, 31.29130857014966700, -28.37223374938522000 ) ) ; +#52629 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 90.16054007504462200, -28.34042301926884400 ) ) ; +#52630 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 37.66666666666667100, 4.294441961969993400 ) ) ; +#52631 = CARTESIAN_POINT ( 'NONE', ( -4.745342735184531000, 31.00380841767820400, -28.64142799534455000 ) ) ; +#52632 = FACE_OUTER_BOUND ( 'NONE', #9903, .T. ) ; +#52633 = EDGE_LOOP ( 'NONE', ( #20624, #74115, #29080 ) ) ; +#52634 = ORIENTED_EDGE ( 'NONE', *, *, #29339, .F. ) ; +#52635 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#52636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52637 = ADVANCED_FACE ( 'NONE', ( #78398 ), #60079, .F. ) ; +#52638 = EDGE_LOOP ( 'NONE', ( #41540, #69293, #31191 ) ) ; +#52639 = CONICAL_SURFACE ( 'NONE', #67781, 10.50000000000009600, 0.7853981633974518300 ) ; +#52640 = EDGE_LOOP ( 'NONE', ( #42236, #65927, #78463 ) ) ; +#52641 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#52642 = ORIENTED_EDGE ( 'NONE', *, *, #20465, .F. ) ; +#52643 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#52644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52645 = ORIENTED_EDGE ( 'NONE', *, *, #4945, .F. ) ; +#52646 = CARTESIAN_POINT ( 'NONE', ( -9.769188246343313500, 50.94994472024610800, -28.43636979168675400 ) ) ; +#52647 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943326400, 45.54999999999998300, -28.70555803802996700 ) ) ; +#52648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#52649 = ADVANCED_FACE ( 'NONE', ( #12380 ), #26982, .T. ) ; +#52650 = EDGE_LOOP ( 'NONE', ( #5312, #53445, #30190, #10220, #46320 ) ) ; +#52651 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343285500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#52652 = CONICAL_SURFACE ( 'NONE', #25508, 10.50000000000009400, 0.7853981633974500600 ) ; +#52653 = ADVANCED_FACE ( 'NONE', ( #9573 ), #74655, .T. ) ; +#52654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52655 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105653900, 14.05000000000004900, -28.70555803803009500 ) ) ; +#52656 = AXIS2_PLACEMENT_3D ( 'NONE', #10229, #53731, #16491 ) ; +#52657 = VERTEX_POINT ( 'NONE', #21112 ) ; +#52658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52659 = FACE_OUTER_BOUND ( 'NONE', #29059, .T. ) ; +#52660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52661 = VERTEX_POINT ( 'NONE', #64631 ) ; +#52662 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 1.387778780781445700E-014, -1.205558038030005300 ) ) ; +#52663 = ORIENTED_EDGE ( 'NONE', *, *, #72568, .F. ) ; +#52664 = PLANE ( 'NONE', #60088 ) ; +#52665 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#52666 = ORIENTED_EDGE ( 'NONE', *, *, #61102, .F. ) ; +#52667 = ORIENTED_EDGE ( 'NONE', *, *, #59524, .T. ) ; +#52668 = ORIENTED_EDGE ( 'NONE', *, *, #62512, .F. ) ; +#52669 = EDGE_LOOP ( 'NONE', ( #62595, #48578, #44589 ) ) ; +#52670 = FILL_AREA_STYLE_COLOUR ( '', #4336 ) ; +#52671 = CIRCLE ( 'NONE', #14914, 10.00000000000009200 ) ; +#52672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52673 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#52674 = AXIS2_PLACEMENT_3D ( 'NONE', #50661, #13462, #56960 ) ; +#52675 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463200, 51.37838321498817600, -28.29547179040444100 ) ) ; +#52676 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68904, #44106, #30497, #74011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775788512000, 0.0009605145132136704400 ), + .UNSPECIFIED. ) ; +#52677 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#52678 = EDGE_CURVE ( 'NONE', #50287, #72415, #76576, .T. ) ; +#52679 = EDGE_LOOP ( 'NONE', ( #753, #10924, #45052 ) ) ; +#52680 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#52681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52683 = CARTESIAN_POINT ( 'NONE', ( -5.883745263583233700, 45.54999999999998300, -28.53994725305377100 ) ) ; +#52684 = CIRCLE ( 'NONE', #9678, 9.500000000000097700 ) ; +#52685 = ORIENTED_EDGE ( 'NONE', *, *, #77636, .F. ) ; +#52686 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22418, #47129, #72209, #34942 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.430489624538199200E-017, 0.002142239874693905600 ), + .UNSPECIFIED. ) ; +#52687 = CARTESIAN_POINT ( 'NONE', ( -11.74546181355820800, 18.09617548195244700, -28.64146967277530100 ) ) ; +#52688 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431400, 49.42298334620763700, -28.20555803802997700 ) ) ; +#52689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45807, #33337, #58354, #21119 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553759417300E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#52690 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714272300, 47.42318720225497900, -28.70555803802996700 ) ) ; +#52691 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52693 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#52694 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708534600, 85.79999999999998300, -28.63843632546336000 ) ) ; +#52695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6407, #68691, #6662, #50155 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716355900, 0.004080294652942993900 ), + .UNSPECIFIED. ) ; +#52696 = EDGE_CURVE ( 'NONE', #20935, #4804, #62022, .T. ) ; +#52697 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#52698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52699 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 9.333333333333346400, -6.705558038030005700 ) ) ; +#52700 = EDGE_CURVE ( 'NONE', #49122, #3351, #49617, .T. ) ; +#52701 = ORIENTED_EDGE ( 'NONE', *, *, #61102, .T. ) ; +#52702 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465431500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#52703 = CARTESIAN_POINT ( 'NONE', ( -4.346153846153682400, 70.79999999999998300, -28.55171188418376000 ) ) ; +#52704 = ORIENTED_EDGE ( 'NONE', *, *, #32964, .F. ) ; +#52705 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 43.66666666666667900, 3.124568980892192800 ) ) ; +#52706 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001600, 88.16545993132820100, -28.70555803803001600 ) ) ; +#52707 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52708 = EDGE_CURVE ( 'NONE', #11374, #24370, #35229, .T. ) ; +#52709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52710 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 8.666666666666683800, 5.722645192245505700 ) ) ; +#52711 = EDGE_CURVE ( 'NONE', #66318, #68343, #20740, .T. ) ; +#52712 = CIRCLE ( 'NONE', #75722, 9.500000000000097700 ) ; +#52713 = VERTEX_POINT ( 'NONE', #2830 ) ; +#52714 = AXIS2_PLACEMENT_3D ( 'NONE', #62467, #31474, #18931 ) ; +#52715 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#52716 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 51.43945992495533700, -28.34042301926881200 ) ) ; +#52717 = ORIENTED_EDGE ( 'NONE', *, *, #36994, .F. ) ; +#52718 = EDGE_CURVE ( 'NONE', #1060, #77718, #6262, .T. ) ; +#52719 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 51.99560977511662000, -28.70555803802997700 ) ) ; +#52720 = CIRCLE ( 'NONE', #59934, 10.00000000000009400 ) ; +#52721 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 46.00000000000000700, -12.20555803803000200 ) ) ; +#52722 = PLANE ( 'NONE', #4983 ) ; +#52723 = EDGE_LOOP ( 'NONE', ( #4838, #58238, #21786 ) ) ; +#52724 = ORIENTED_EDGE ( 'NONE', *, *, #20374, .F. ) ; +#52725 = EDGE_LOOP ( 'NONE', ( #44349, #16011, #30566 ) ) ; +#52726 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#52727 = EDGE_LOOP ( 'NONE', ( #29468, #24393, #59053 ) ) ; +#52728 = AXIS2_PLACEMENT_3D ( 'NONE', #3807, #28899, #28624 ) ; +#52729 = FACE_OUTER_BOUND ( 'NONE', #64792, .T. ) ; +#52730 = EDGE_CURVE ( 'NONE', #19506, #27666, #72614, .T. ) ; +#52731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1451, #75989, #13741, #44933 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0007331043932795726900 ), + .UNSPECIFIED. ) ; +#52732 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#52733 = EDGE_CURVE ( 'NONE', #11625, #44027, #58124, .T. ) ; +#52734 = EDGE_CURVE ( 'NONE', #16470, #22529, #43479, .T. ) ; +#52735 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#52736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52737 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#52738 = VERTEX_POINT ( 'NONE', #40647 ) ; +#52739 = ORIENTED_EDGE ( 'NONE', *, *, #45795, .T. ) ; +#52740 = CIRCLE ( 'NONE', #38407, 10.00000000000009200 ) ; +#52741 = AXIS2_PLACEMENT_3D ( 'NONE', #6153, #5896, #43393 ) ; +#52742 = EDGE_LOOP ( 'NONE', ( #57236, #27715, #53656, #35135 ) ) ; +#52743 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528424400, 28.63131911501858400, -28.51286550264480400 ) ) ; +#52744 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52745 = ORIENTED_EDGE ( 'NONE', *, *, #7313, .F. ) ; +#52746 = CARTESIAN_POINT ( 'NONE', ( 9.695954216608885900, 80.13716795162622500, -28.48697406221719300 ) ) ; +#52747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52748 = EDGE_LOOP ( 'NONE', ( #47644, #40157, #29663 ) ) ; +#52749 = ORIENTED_EDGE ( 'NONE', *, *, #35154, .T. ) ; +#52750 = EDGE_LOOP ( 'NONE', ( #6087, #56326, #21255, #42442, #20384 ) ) ; +#52751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52752 = FACE_OUTER_BOUND ( 'NONE', #27356, .T. ) ; +#52753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52754 = VERTEX_POINT ( 'NONE', #21895 ) ; +#52755 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957530300, 48.50972971738993800, -28.70555803802997000 ) ) ; +#52756 = EDGE_CURVE ( 'NONE', #33691, #79578, #28963, .T. ) ; +#52757 = ADVANCED_FACE ( 'NONE', ( #58091 ), #72713, .T. ) ; +#52758 = FACE_OUTER_BOUND ( 'NONE', #3778, .T. ) ; +#52759 = AXIS2_PLACEMENT_3D ( 'NONE', #22025, #3496, #46995 ) ; +#52760 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 61.43945992495518000, -28.34042301926901400 ) ) ; +#52761 = AXIS2_PLACEMENT_3D ( 'NONE', #53684, #78734, #72481 ) ; +#52762 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#52763 = ADVANCED_FACE ( 'NONE', ( #10421 ), #6508, .T. ) ; +#52764 = ORIENTED_EDGE ( 'NONE', *, *, #31598, .F. ) ; +#52765 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811153600, 54.54539096019119200, -28.69802137271994300 ) ) ; +#52766 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830843300, 89.95045548864068500, -28.33400579219045000 ) ) ; +#52767 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 49.50000000000002100, 4.650848422521012700 ) ) ; +#52768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52769 = FACE_OUTER_BOUND ( 'NONE', #69002, .T. ) ; +#52770 = VERTEX_POINT ( 'NONE', #58125 ) ; +#52771 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528143800, 41.46868088498121800, -28.51286550264512700 ) ) ; +#52772 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846543500, 40.60079448659599400, -28.70555803802996700 ) ) ; +#52773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52774 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985145300, 25.50238095238092500, -28.70555803802994200 ) ) ; +#52775 = AXIS2_PLACEMENT_3D ( 'NONE', #4098, #10372, #53877 ) ; +#52776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52777 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 70.16054007504466500, -28.34042301926881200 ) ) ; +#52778 = ADVANCED_FACE ( 'NONE', ( #56131 ), #54186, .F. ) ; +#52779 = AXIS2_PLACEMENT_3D ( 'NONE', #58906, #21673, #65208 ) ; +#52780 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52781 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551029100, 49.50000000000000700, 4.650848422521010900 ) ) ; +#52782 = EDGE_CURVE ( 'NONE', #3947, #66435, #43630, .T. ) ; +#52783 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52784 = ORIENTED_EDGE ( 'NONE', *, *, #48060, .F. ) ; +#52785 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732780400, 81.93585231025905100, -28.38420446581295700 ) ) ; +#52786 = VERTEX_POINT ( 'NONE', #9919 ) ; +#52787 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 14.66666666666667500, -5.205558038030003100 ) ) ; +#52788 = CARTESIAN_POINT ( 'NONE', ( 19.62532987415531600, 93.91239383146236700, -27.57249940867796700 ) ) ; +#52789 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 26.42318720225497900, -28.70555803802994200 ) ) ; +#52790 = ORIENTED_EDGE ( 'NONE', *, *, #68246, .T. ) ; +#52791 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7777, #26849, #45555, #8312 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648719039000E-007, 0.0007596411030280992100 ), + .UNSPECIFIED. ) ; +#52792 = CIRCLE ( 'NONE', #80402, 9.500000000000099500 ) ; +#52793 = ORIENTED_EDGE ( 'NONE', *, *, #18794, .F. ) ; +#52794 = FACE_OUTER_BOUND ( 'NONE', #49103, .T. ) ; +#52795 = AXIS2_PLACEMENT_3D ( 'NONE', #20792, #1996, #64334 ) ; +#52796 = ORIENTED_EDGE ( 'NONE', *, *, #16522, .T. ) ; +#52797 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 42.18315603019281200, -28.70555803802999500 ) ) ; +#52798 = ORIENTED_EDGE ( 'NONE', *, *, #26947, .T. ) ; +#52799 = CONICAL_SURFACE ( 'NONE', #72610, 10.50000000000009600, 0.7853981633974500600 ) ; +#52800 = EDGE_LOOP ( 'NONE', ( #58550, #46532, #45984, #60651 ) ) ; +#52801 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171147300, 40.29999999999999000, -28.57107744631858600 ) ) ; +#52802 = VERTEX_POINT ( 'NONE', #39624 ) ; +#52803 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 18.00000000000000700, -1.205558038030002800 ) ) ; +#52804 = ORIENTED_EDGE ( 'NONE', *, *, #70945, .F. ) ; +#52805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80351, #61616, #30868, #74386 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572461355000E-007, 0.0004669842289003626800 ), + .UNSPECIFIED. ) ; +#52807 = FACE_OUTER_BOUND ( 'NONE', #71964, .T. ) ; +#52808 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 70.90033558196107300, -28.70555803802997700 ) ) ; +#52809 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 58.16666666666665700, -3.349151577478988200 ) ) ; +#52810 = ORIENTED_EDGE ( 'NONE', *, *, #72196, .T. ) ; +#52811 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 90.13716795162659400, -28.48697406221667400 ) ) ; +#52812 = CIRCLE ( 'NONE', #30612, 10.00000000000009600 ) ; +#52813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52814 = EDGE_CURVE ( 'NONE', #64371, #40807, #29273, .T. ) ; +#52815 = ORIENTED_EDGE ( 'NONE', *, *, #65416, .T. ) ; +#52816 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715068600, 28.77966528189953300, -28.30868034705248700 ) ) ; +#52818 = EDGE_CURVE ( 'NONE', #67144, #11478, #41551, .T. ) ; +#52817 = ORIENTED_EDGE ( 'NONE', *, *, #37321, .F. ) ; +#52819 = ORIENTED_EDGE ( 'NONE', *, *, #26068, .F. ) ; +#52820 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.16749699759769500, -28.20555803802997700 ) ) ; +#52821 = CONICAL_SURFACE ( 'NONE', #35101, 10.00000000000009400, 0.7853981633974447300 ) ; +#52822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52823 = CARTESIAN_POINT ( 'NONE', ( 16.84449792284933500, 39.27966528189954000, -28.30868034705250100 ) ) ; +#52824 = ORIENTED_EDGE ( 'NONE', *, *, #5183, .T. ) ; +#52825 = FACE_OUTER_BOUND ( 'NONE', #48669, .T. ) ; +#52826 = EDGE_LOOP ( 'NONE', ( #42105, #65787, #44053, #46803, #35969 ) ) ; +#52827 = EDGE_CURVE ( 'NONE', #13691, #2995, #14747, .T. ) ; +#52828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58960, #40188, #2921, #65260 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005874604244620993900, 0.005955425963927433000 ), + .UNSPECIFIED. ) ; +#52829 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#52830 = ADVANCED_FACE ( 'NONE', ( #8436 ), #4559, .T. ) ; +#52831 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526968100, 90.01262610361158100, -28.29936525552496500 ) ) ; +#52832 = CARTESIAN_POINT ( 'NONE', ( -15.05230528786076700, 75.75869881725290600, -28.70545453106903000 ) ) ; +#52833 = VERTEX_POINT ( 'NONE', #71171 ) ; +#52834 = CARTESIAN_POINT ( 'NONE', ( -4.186539978270701600, 6.877501000800540600, -28.20555803802993100 ) ) ; +#52835 = EDGE_CURVE ( 'NONE', #52802, #62098, #21125, .T. ) ; +#52836 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 20.50000000000000700, 2.454695999814385600 ) ) ; +#52837 = EDGE_CURVE ( 'NONE', #26454, #9494, #70733, .T. ) ; +#52838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52840 = VECTOR ( 'NONE', #17123, 1000.000000000000000 ) ; +#52841 = ORIENTED_EDGE ( 'NONE', *, *, #33081, .T. ) ; +#52842 = FACE_OUTER_BOUND ( 'NONE', #2846, .T. ) ; +#52843 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 71.43383669612127600, -28.27375072930956200 ) ) ; +#52844 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428580100, 63.67681279774445400, -28.70555803803047500 ) ) ; +#52845 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 44.44999999999999600, 0.0000000000000000000 ) ) ; +#52846 = ADVANCED_FACE ( 'NONE', ( #37618 ), #260, .T. ) ; +#52847 = PLANE ( 'NONE', #17142 ) ; +#52848 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174874700, 70.16054007504448000, -28.34042301926893600 ) ) ; +#52849 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 41.44069092601378700, -28.35186440610859300 ) ) ; +#52850 = AXIS2_PLACEMENT_3D ( 'NONE', #14081, #57582, #20328 ) ; +#52851 = EDGE_CURVE ( 'NONE', #15981, #53345, #66615, .T. ) ; +#52852 = EDGE_CURVE ( 'NONE', #69424, #70061, #52206, .T. ) ; +#52853 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548987100, 18.15930907398587700, -28.35186440610879900 ) ) ; +#52854 = EDGE_CURVE ( 'NONE', #56550, #77533, #52099, .T. ) ; +#52855 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182800, 49.63131911501876200, -28.51286550264510900 ) ) ; +#52856 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192778600, 76.79999999999982700, -28.70555803803030800 ) ) ; +#52857 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537141900, 80.20590598242367300, -28.39369363572356200 ) ) ; +#52858 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627436400, 26.43535825203924700, -28.53896444442198900 ) ) ; +#52859 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52860 = AXIS2_PLACEMENT_3D ( 'NONE', #34142, #77653, #40381 ) ; +#52861 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378067200, 90.82516071402385200, -28.57108397021908900 ) ) ; +#52862 = CARTESIAN_POINT ( 'NONE', ( 16.59634636297397100, 94.17246020872474300, -28.37265088019773500 ) ) ; +#52863 = ORIENTED_EDGE ( 'NONE', *, *, #11984, .T. ) ; +#52864 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52865 = AXIS2_PLACEMENT_3D ( 'NONE', #62143, #24877, #68389 ) ; +#52866 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230960500, 40.81139552890385900, -28.53900456328628000 ) ) ; +#52867 = AXIS2_PLACEMENT_3D ( 'NONE', #16900, #29189, #78932 ) ; +#52868 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#52869 = AXIS2_PLACEMENT_3D ( 'NONE', #24038, #67547, #30318 ) ; +#52871 = VERTEX_POINT ( 'NONE', #3689 ) ; +#52870 = CARTESIAN_POINT ( 'NONE', ( 3.499520597198455500, 80.69966441803890700, -28.70555803802997700 ) ) ; +#52872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58765, #15255, #77532, #40254 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248701348600, 0.0009400395309964084500 ), + .UNSPECIFIED. ) ; +#52874 = ORIENTED_EDGE ( 'NONE', *, *, #57963, .T. ) ; +#52875 = ADVANCED_FACE ( 'NONE', ( #68794 ), #34731, .T. ) ; +#52876 = FACE_OUTER_BOUND ( 'NONE', #23322, .T. ) ; +#52877 = ORIENTED_EDGE ( 'NONE', *, *, #25693, .F. ) ; +#52878 = CIRCLE ( 'NONE', #42995, 9.500000000000099500 ) ; +#52879 = ORIENTED_EDGE ( 'NONE', *, *, #74569, .T. ) ; +#52880 = CONICAL_SURFACE ( 'NONE', #56366, 10.00000000000009400, 0.7853981633974447300 ) ; +#52881 = ORIENTED_EDGE ( 'NONE', *, *, #54512, .T. ) ; +#52882 = ORIENTED_EDGE ( 'NONE', *, *, #54171, .T. ) ; +#52883 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 64.16666666666667100, 6.794441961969992500 ) ) ; +#52884 = EDGE_CURVE ( 'NONE', #37269, #67043, #37647, .T. ) ; +#52885 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52886 = CONICAL_SURFACE ( 'NONE', #67544, 10.00000000000009400, 0.7853981633974447300 ) ; +#52887 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#52888 = EDGE_LOOP ( 'NONE', ( #17811, #1170, #40452, #68657 ) ) ; +#52889 = CIRCLE ( 'NONE', #35264, 10.00000000000009400 ) ; +#52890 = ORIENTED_EDGE ( 'NONE', *, *, #3256, .T. ) ; +#52891 = PLANE ( 'NONE', #35488 ) ; +#52892 = EDGE_CURVE ( 'NONE', #57725, #27561, #19144, .T. ) ; +#52893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52894 = EDGE_LOOP ( 'NONE', ( #46442, #41361, #60672, #27521 ) ) ; +#52895 = ORIENTED_EDGE ( 'NONE', *, *, #71205, .T. ) ; +#52896 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244300, 19.89456479767167400, -28.70555803802994200 ) ) ; +#52897 = ORIENTED_EDGE ( 'NONE', *, *, #67839, .T. ) ; +#52898 = CONICAL_SURFACE ( 'NONE', #42896, 10.00000000000009400, 0.7853981633974447300 ) ; +#52899 = VERTEX_POINT ( 'NONE', #47188 ) ; +#52900 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44151, #49884, #13227, #56707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700654100, 0.0009400395309963764700 ), + .UNSPECIFIED. ) ; +#52901 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 71.62753447840884700, -28.38801640354855100 ) ) ; +#52902 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52903 = CARTESIAN_POINT ( 'NONE', ( 16.96381042528194500, 7.194715344817729500, -28.29267303639201000 ) ) ; +#52904 = CARTESIAN_POINT ( 'NONE', ( -16.42212147481426500, 20.48660297389124500, -28.58281552184495300 ) ) ; +#52905 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52906 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 35.50000000000000700, -9.258116921287651700 ) ) ; +#52907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52908 = ORIENTED_EDGE ( 'NONE', *, *, #60141, .T. ) ; +#52909 = AXIS2_PLACEMENT_3D ( 'NONE', #31162, #37362, #43359 ) ; +#52910 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 35.05000000000000400, -28.20555803802995200 ) ) ; +#52911 = VERTEX_POINT ( 'NONE', #66006 ) ; +#52912 = CIRCLE ( 'NONE', #32040, 10.50000000000009600 ) ; +#52913 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58969, #9452, #52969, #15731 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153200878460400E-007, 0.0003300514678516725900 ), + .UNSPECIFIED. ) ; +#52914 = CARTESIAN_POINT ( 'NONE', ( 10.04027359854960400, 39.22437813624629400, -28.30310527599300500 ) ) ; +#52915 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#52916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52917 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818956600, 69.94924284854708700, -28.20555803802997700 ) ) ; +#52918 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 89.94924284854739900, -28.20555803802997700 ) ) ; +#52919 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310471800, 49.60230989102910100, -28.61774594594331600 ) ) ; +#52920 = AXIS2_PLACEMENT_3D ( 'NONE', #52062, #46084, #8815 ) ; +#52921 = ADVANCED_FACE ( 'NONE', ( #39591 ), #17212, .T. ) ; +#52922 = CARTESIAN_POINT ( 'NONE', ( 15.42260348117765800, 92.44520696237293600, -28.70555803803001600 ) ) ; +#52923 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#52924 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 31.06248377813449900, -28.32723995587591400 ) ) ; +#52925 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52926 = EDGE_CURVE ( 'NONE', #57949, #35216, #33754, .T. ) ; +#52927 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -2.166666666666653200, 0.9380355014189731800 ) ) ; +#52928 = CONICAL_SURFACE ( 'NONE', #42432, 10.50000000000009600, 0.7853981633974518300 ) ; +#52929 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465800, 20.49769010897087200, -28.61774594594332300 ) ) ; +#52930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52931 = ORIENTED_EDGE ( 'NONE', *, *, #20814, .F. ) ; +#52932 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609813600, 61.46283204837369900, -28.48697406221627300 ) ) ; +#52933 = ADVANCED_FACE ( 'NONE', ( #35705 ), #48316, .T. ) ; +#52934 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#52935 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 22.67681279774500100, -28.70555803802995200 ) ) ; +#52936 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52937 = ORIENTED_EDGE ( 'NONE', *, *, #46511, .T. ) ; +#52938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52939 = ORIENTED_EDGE ( 'NONE', *, *, #58703, .T. ) ; +#52940 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063250600, 39.00210619075101400, -28.25343951603329300 ) ) ; +#52941 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#52942 = FACE_OUTER_BOUND ( 'NONE', #46597, .T. ) ; +#52943 = ORIENTED_EDGE ( 'NONE', *, *, #22377, .T. ) ; +#52944 = CARTESIAN_POINT ( 'NONE', ( -2.881082274201372400, 61.10238820582981100, -28.32098513914466400 ) ) ; +#52945 = FACE_OUTER_BOUND ( 'NONE', #21546, .T. ) ; +#52946 = EDGE_CURVE ( 'NONE', #51376, #53681, #23231, .T. ) ; +#52947 = ORIENTED_EDGE ( 'NONE', *, *, #45062, .F. ) ; +#52948 = ADVANCED_FACE ( 'NONE', ( #50258 ), #15258, .T. ) ; +#52949 = ORIENTED_EDGE ( 'NONE', *, *, #61113, .F. ) ; +#52950 = CIRCLE ( 'NONE', #44297, 10.50000000000009200 ) ; +#52951 = FACE_OUTER_BOUND ( 'NONE', #58541, .T. ) ; +#52953 = ORIENTED_EDGE ( 'NONE', *, *, #41998, .T. ) ; +#52952 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#52954 = ORIENTED_EDGE ( 'NONE', *, *, #5384, .F. ) ; +#52955 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338502800, 41.60677350908861900, -28.30799595738892500 ) ) ; +#52956 = ORIENTED_EDGE ( 'NONE', *, *, #65147, .T. ) ; +#52957 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666600, 81.46283204837337200, -28.48697406221659300 ) ) ; +#52958 = AXIS2_PLACEMENT_3D ( 'NONE', #54642, #4863, #11139 ) ; +#52959 = EDGE_CURVE ( 'NONE', #68977, #74697, #8730, .T. ) ; +#52960 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#52961 = EDGE_CURVE ( 'NONE', #71408, #1321, #75083, .T. ) ; +#52962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68945, #31707, #75206, #37922 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678005838400, 0.0007670610367941048500 ), + .UNSPECIFIED. ) ; +#52963 = ADVANCED_FACE ( 'NONE', ( #632 ), #62954, .T. ) ; +#52964 = CIRCLE ( 'NONE', #20606, 10.50000000000009800 ) ; +#52965 = EDGE_CURVE ( 'NONE', #780, #71106, #60637, .T. ) ; +#52966 = ORIENTED_EDGE ( 'NONE', *, *, #47559, .T. ) ; +#52967 = AXIS2_PLACEMENT_3D ( 'NONE', #66450, #72708, #22924 ) ; +#52968 = CIRCLE ( 'NONE', #6523, 10.00000000000009400 ) ; +#52969 = CARTESIAN_POINT ( 'NONE', ( 3.976832725519294300, 18.08088969930762200, -28.30223898143233200 ) ) ; +#52970 = EDGE_LOOP ( 'NONE', ( #582, #30158, #55681, #28666 ) ) ; +#52971 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#52972 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534586200, 29.49920551340399300, -28.70555803802994200 ) ) ; +#52973 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 7.166666666666683800, 1.741883078712356500 ) ) ; +#52974 = ORIENTED_EDGE ( 'NONE', *, *, #80183, .T. ) ; +#52975 = ORIENTED_EDGE ( 'NONE', *, *, #5698, .T. ) ; +#52976 = VERTEX_POINT ( 'NONE', #68164 ) ; +#52977 = ORIENTED_EDGE ( 'NONE', *, *, #61096, .T. ) ; +#52978 = CIRCLE ( 'NONE', #72604, 9.500000000000095900 ) ; +#52979 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 41.50000000000001400, -4.865812075874393000 ) ) ; +#52980 = AXIS2_PLACEMENT_3D ( 'NONE', #31591, #75105, #37805 ) ; +#52981 = AXIS2_PLACEMENT_3D ( 'NONE', #52868, #15636, #59130 ) ; +#52982 = ORIENTED_EDGE ( 'NONE', *, *, #25234, .T. ) ; +#52983 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 38.41684396980716800, -28.70555803802998400 ) ) ; +#52984 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654369200, 90.27440177985805300, -28.29986836858037700 ) ) ; +#52985 = EDGE_CURVE ( 'NONE', #49483, #8048, #66856, .T. ) ; +#52986 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 6.500000000000017800, -7.061964498581022400 ) ) ; +#52987 = ORIENTED_EDGE ( 'NONE', *, *, #525, .T. ) ; +#52988 = ORIENTED_EDGE ( 'NONE', *, *, #69761, .F. ) ; +#52989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#52990 = VERTEX_POINT ( 'NONE', #55647 ) ; +#52991 = CARTESIAN_POINT ( 'NONE', ( 5.246723554415373400, 44.44999999999986100, 4.909840335299445100 ) ) ; +#52992 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52993 = CIRCLE ( 'NONE', #32507, 10.50000000000009600 ) ; +#52994 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 43.83333333333334300, 9.794441961969999600 ) ) ; +#52995 = CARTESIAN_POINT ( 'NONE', ( -3.221259145455638100, 18.16476764525110700, -28.30311733712044700 ) ) ; +#52996 = EDGE_CURVE ( 'NONE', #74917, #12422, #46119, .T. ) ; +#52997 = AXIS2_PLACEMENT_3D ( 'NONE', #69051, #13049, #25565 ) ; +#52998 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7150, #44378, #25962, #69443 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352895825400E-007, 0.0007670609591620237500 ), + .UNSPECIFIED. ) ; +#52999 = AXIS2_PLACEMENT_3D ( 'NONE', #77360, #77082, #58583 ) ; +#53000 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 57.14999999999999900, -1.205558038030003500 ) ) ; +#53001 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53002 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855085800, 67.92318720225479500, -28.70555803802997700 ) ) ; +#53003 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153451500, 90.79999999999967000, -28.55171188418384900 ) ) ; +#53004 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53005 = FACE_OUTER_BOUND ( 'NONE', #49437, .T. ) ; +#53006 = CARTESIAN_POINT ( 'NONE', ( -9.452258779923846900, 31.78032162676816700, -28.55467576047083600 ) ) ; +#53007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53008 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11669, #17904, #73948, #36652 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983716890468600E-007, 0.001076779618376410800 ), + .UNSPECIFIED. ) ; +#53009 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567223800, 49.85339758437807900, -28.20555803802996700 ) ) ; +#53010 = AXIS2_PLACEMENT_3D ( 'NONE', #43397, #6161, #49635 ) ; +#53011 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 77.94142842854310500, -28.20555803802997700 ) ) ; +#53012 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339004500, 70.13716795162646600, -28.48697406221666000 ) ) ; +#53013 = VERTEX_POINT ( 'NONE', #80681 ) ; +#53014 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344303800, 49.42298334620756600, -28.20555803802996700 ) ) ; +#53016 = ORIENTED_EDGE ( 'NONE', *, *, #20446, .T. ) ; +#53015 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079883700, 28.66616330387869700, -28.27375072930954000 ) ) ; +#53017 = CIRCLE ( 'NONE', #34358, 10.00000000000009200 ) ; +#53018 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155498100, 56.13383585008156000, -28.37247596307076200 ) ) ; +#53019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53020 = ORIENTED_EDGE ( 'NONE', *, *, #32344, .F. ) ; +#53021 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 63.43454006867097000, -28.70555803803024400 ) ) ; +#53022 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#53023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53024 = FACE_OUTER_BOUND ( 'NONE', #31206, .T. ) ; +#53025 = AXIS2_PLACEMENT_3D ( 'NONE', #38056, #798, #44291 ) ; +#53026 = CIRCLE ( 'NONE', #43933, 10.00000000000009600 ) ; +#53027 = ORIENTED_EDGE ( 'NONE', *, *, #63623, .T. ) ; +#53028 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 47.33333333333333600, -8.133761268305512700 ) ) ; +#53029 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 73.65857157145704500, -28.20555803803014400 ) ) ; +#53030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53031 = CONICAL_SURFACE ( 'NONE', #28189, 10.50000000000009600, 0.7853981633974518300 ) ; +#53032 = ORIENTED_EDGE ( 'NONE', *, *, #74316, .T. ) ; +#53033 = ORIENTED_EDGE ( 'NONE', *, *, #29598, .F. ) ; +#53034 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 81.62753447840887600, -28.38801640354855100 ) ) ; +#53035 = ADVANCED_FACE ( 'NONE', ( #79499 ), #13320, .F. ) ; +#53036 = AXIS2_PLACEMENT_3D ( 'NONE', #6826, #50310, #13107 ) ; +#53037 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465429700, 30.10079448659600100, -28.70555803802995200 ) ) ; +#53038 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53039 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752689800, 52.08770193146234100, -28.47147304844861900 ) ) ; +#53040 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53041 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2349, #39637, #21166, #64687 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.853303177097571900E-005, 0.0008082646680357322500 ), + .UNSPECIFIED. ) ; +#53042 = CYLINDRICAL_SURFACE ( 'NONE', #50229, 10.00000000000000200 ) ; +#53043 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345555300, 90.07527064970038600, -28.39317435246185200 ) ) ; +#53044 = ORIENTED_EDGE ( 'NONE', *, *, #78352, .T. ) ; +#53045 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996800, 31.68315603019282300, -28.70555803802999200 ) ) ; +#53046 = FACE_OUTER_BOUND ( 'NONE', #7537, .T. ) ; +#53047 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 51.66666666666667900, -5.205558038030003100 ) ) ; +#53048 = ORIENTED_EDGE ( 'NONE', *, *, #58548, .T. ) ; +#53049 = ADVANCED_FACE ( 'NONE', ( #46343 ), #61006, .F. ) ; +#53050 = ORIENTED_EDGE ( 'NONE', *, *, #1621, .T. ) ; +#53051 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#53052 = ORIENTED_EDGE ( 'NONE', *, *, #23195, .F. ) ; +#53054 = ADVANCED_FACE ( 'NONE', ( #31813 ), #27934, .F. ) ; +#53053 = ORIENTED_EDGE ( 'NONE', *, *, #66316, .F. ) ; +#53055 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53056 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 12.50000000000001200, 4.650848422521012700 ) ) ; +#53057 = CARTESIAN_POINT ( 'NONE', ( 22.03807331266610300, 95.11871189127344900, -25.81504861979448900 ) ) ; +#53058 = CIRCLE ( 'NONE', #34943, 10.00000000000009400 ) ; +#53059 = ORIENTED_EDGE ( 'NONE', *, *, #46143, .F. ) ; +#53060 = ORIENTED_EDGE ( 'NONE', *, *, #59781, .F. ) ; +#53061 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 60.07141756547892400, -28.70555803802997700 ) ) ; +#53062 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57042, #13539, #69535, #32280 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882703668600E-007, 0.0004435496461727848800 ), + .UNSPECIFIED. ) ; +#53063 = ADVANCED_FACE ( 'NONE', ( #29897 ), #31465, .T. ) ; +#53064 = EDGE_LOOP ( 'NONE', ( #36885, #42681, #1070, #3450 ) ) ; +#53065 = EDGE_LOOP ( 'NONE', ( #62766, #39928, #54448 ) ) ; +#53066 = CONICAL_SURFACE ( 'NONE', #3419, 10.50000000000009600, 0.7853981633974518300 ) ; +#53067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53068 = EDGE_LOOP ( 'NONE', ( #17561, #73002, #21324, #33757 ) ) ; +#53069 = FACE_OUTER_BOUND ( 'NONE', #57570, .T. ) ; +#53070 = EDGE_CURVE ( 'NONE', #77229, #30265, #2576, .T. ) ; +#53071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53072 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 15.83333333333333700, -2.545304000185615800 ) ) ; +#53073 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865853800, 39.41272737910568900, -28.28853693900642000 ) ) ; +#53074 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53075 = EDGE_CURVE ( 'NONE', #42171, #33069, #77535, .T. ) ; +#53076 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875015100, 66.46717019299478600, -28.53914313452737500 ) ) ; +#53077 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 56.00000000000000700, -1.205558038030005300 ) ) ; +#53078 = EDGE_CURVE ( 'NONE', #10382, #36192, #44379, .T. ) ; +#53079 = AXIS2_PLACEMENT_3D ( 'NONE', #3184, #71761, #34492 ) ; +#53080 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53082 = CIRCLE ( 'NONE', #29848, 10.00000000000009400 ) ; +#53083 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53084 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75327, #31828, #69076, #38032 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711373872100E-007, 0.0008482615949373525300 ), + .UNSPECIFIED. ) ; +#53085 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#53086 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#53087 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462826700, 80.34267608797601700, -28.20555803803030800 ) ) ; +#53088 = ORIENTED_EDGE ( 'NONE', *, *, #28308, .T. ) ; +#53089 = PLANE ( 'NONE', #75532 ) ; +#53090 = VERTEX_POINT ( 'NONE', #43920 ) ; +#53091 = CYLINDRICAL_SURFACE ( 'NONE', #5635, 10.00000000000000200 ) ; +#53092 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534570700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#53093 = AXIS2_PLACEMENT_3D ( 'NONE', #38687, #1446, #44930 ) ; +#53095 = ORIENTED_EDGE ( 'NONE', *, *, #15810, .T. ) ; +#53094 = EDGE_CURVE ( 'NONE', #55473, #17606, #23072, .T. ) ; +#53096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53097 = EDGE_CURVE ( 'NONE', #61739, #72130, #31710, .T. ) ; +#53098 = EDGE_CURVE ( 'NONE', #58896, #71408, #75567, .T. ) ; +#53099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53100 = AXIS2_PLACEMENT_3D ( 'NONE', #19519, #56760, #63043 ) ; +#53101 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650751500, 18.70543520232827800, -28.70555803802992800 ) ) ; +#53102 = FACE_OUTER_BOUND ( 'NONE', #41063, .T. ) ; +#53103 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53104 = CIRCLE ( 'NONE', #1177, 10.00000000000009400 ) ; +#53105 = ORIENTED_EDGE ( 'NONE', *, *, #57758, .T. ) ; +#53106 = AXIS2_PLACEMENT_3D ( 'NONE', #2906, #46396, #9141 ) ; +#53107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53109 = FACE_OUTER_BOUND ( 'NONE', #22414, .T. ) ; +#53110 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609694100, 60.13716795162660800, -28.48697406221658600 ) ) ; +#53111 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044800, 59.08026449164335500, -28.70555803802997700 ) ) ; +#53112 = AXIS2_PLACEMENT_3D ( 'NONE', #29351, #79346, #73098 ) ; +#53113 = VERTEX_POINT ( 'NONE', #955 ) ; +#53114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53115 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 59.97246552159111800, -28.38801640354855500 ) ) ; +#53116 = EDGE_CURVE ( 'NONE', #14733, #74884, #17237, .T. ) ; +#53117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53118 = EDGE_LOOP ( 'NONE', ( #34890, #40028, #46090, #23306 ) ) ; +#53119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53120 = AXIS2_PLACEMENT_3D ( 'NONE', #28827, #72324, #35061 ) ; +#53121 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53122 = AXIS2_PLACEMENT_3D ( 'NONE', #69176, #31932, #75442 ) ; +#53123 = CARTESIAN_POINT ( 'NONE', ( 4.441674604852878800, 8.915291560575584000, -28.64723264288322500 ) ) ; +#53124 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 27.12623792124938800, -28.70555803802994200 ) ) ; +#53125 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#53126 = CONICAL_SURFACE ( 'NONE', #4500, 10.00000000000009200, 0.7853981633974447300 ) ; +#53127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53128 = CONICAL_SURFACE ( 'NONE', #4866, 10.50000000000009800, 0.7853981633974500600 ) ; +#53129 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999600, 96.67801017216390800, -18.81588111829280800 ) ) ; +#53130 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753200, 39.70543520232828900, -28.70555803802995200 ) ) ; +#53131 = ORIENTED_EDGE ( 'NONE', *, *, #38087, .T. ) ; +#53132 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465431500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#53133 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#53134 = ORIENTED_EDGE ( 'NONE', *, *, #25807, .T. ) ; +#53135 = ORIENTED_EDGE ( 'NONE', *, *, #8028, .T. ) ; +#53136 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 40.89456479767167000, -28.70555803802996700 ) ) ; +#53137 = AXIS2_PLACEMENT_3D ( 'NONE', #49484, #12290, #55772 ) ; +#53138 = EDGE_LOOP ( 'NONE', ( #71597, #44822, #48868, #61984 ) ) ; +#53139 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 85.46616414991845500, -28.37247596307074800 ) ) ; +#53140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53141 = CIRCLE ( 'NONE', #70395, 10.00000000000009200 ) ; +#53142 = CIRCLE ( 'NONE', #60451, 10.50000000000009900 ) ; +#53143 = CARTESIAN_POINT ( 'NONE', ( 9.497924978448480700, 50.60145251508584600, -28.70555803803014400 ) ) ; +#53144 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#53145 = ORIENTED_EDGE ( 'NONE', *, *, #11339, .T. ) ; +#53146 = EDGE_LOOP ( 'NONE', ( #1855, #49590, #26901, #71082, #48464 ) ) ; +#53147 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136828500, 49.42958814301755400, -28.27321389036145800 ) ) ; +#53148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53149 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16010, #53255, #28565, #72054 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662535512900, 0.0009765394310393585100 ), + .UNSPECIFIED. ) ; +#53150 = FACE_OUTER_BOUND ( 'NONE', #51049, .T. ) ; +#53151 = AXIS2_PLACEMENT_3D ( 'NONE', #37541, #43796, #74852 ) ; +#53152 = ORIENTED_EDGE ( 'NONE', *, *, #34761, .T. ) ; +#53153 = EDGE_LOOP ( 'NONE', ( #65324, #52230, #34099, #59702, #4918 ) ) ; +#53154 = CIRCLE ( 'NONE', #4274, 10.00000000000009200 ) ; +#53155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53156 = ADVANCED_FACE ( 'NONE', ( #11371 ), #40530, .F. ) ; +#53157 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 62.00000000000001400, -9.205558038030005700 ) ) ; +#53158 = AXIS2_PLACEMENT_3D ( 'NONE', #17127, #60659, #23380 ) ; +#53159 = ORIENTED_EDGE ( 'NONE', *, *, #65865, .F. ) ; +#53160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53161 = ADVANCED_FACE ( 'NONE', ( #25964 ), #7419, .T. ) ; +#53162 = EDGE_CURVE ( 'NONE', #40334, #31022, #24012, .T. ) ; +#53163 = CONICAL_SURFACE ( 'NONE', #17784, 10.50000000000009600, 0.7853981633974500600 ) ; +#53164 = VERTEX_POINT ( 'NONE', #20025 ) ; +#53165 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534586700, 29.49920551340399300, -28.70555803802994200 ) ) ; +#53166 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448997100, 56.16666666666666400, 6.794441961969993400 ) ) ; +#53167 = FACE_OUTER_BOUND ( 'NONE', #6828, .T. ) ; +#53168 = EDGE_LOOP ( 'NONE', ( #67967, #40224, #48883, #37047 ) ) ; +#53169 = ORIENTED_EDGE ( 'NONE', *, *, #32466, .F. ) ; +#53170 = FACE_OUTER_BOUND ( 'NONE', #6794, .T. ) ; +#53171 = EDGE_LOOP ( 'NONE', ( #13597, #1002, #73365, #35123 ) ) ; +#53172 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#53173 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345434500, 60.27440177985817400, -28.29986836858018500 ) ) ; +#53174 = ADVANCED_FACE ( 'NONE', ( #42466 ), #38544, .F. ) ; +#53175 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#53176 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 85.80000000000001100, -28.70555803802997700 ) ) ; +#53177 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 33.33333333333332100, 8.320721403598817300 ) ) ; +#53178 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465800, 20.49769010897087200, -28.61774594594332300 ) ) ; +#53179 = FACE_OUTER_BOUND ( 'NONE', #485, .T. ) ; +#53180 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 85.92347538298000100, -28.70555803802997700 ) ) ; +#53181 = FACE_OUTER_BOUND ( 'NONE', #5535, .T. ) ; +#53182 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#53184 = EDGE_CURVE ( 'NONE', #31952, #368, #2735, .T. ) ; +#53183 = EDGE_LOOP ( 'NONE', ( #77269, #60684, #59383, #63918, #34513, #33724, #45700, #9417 ) ) ; +#53185 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 75.79999999999996900, -28.70555803802997700 ) ) ; +#53186 = EDGE_CURVE ( 'NONE', #78686, #5932, #69093, .T. ) ; +#53187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53188 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16640, #4115, #22625, #60168 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0007303759720927819300 ), + .UNSPECIFIED. ) ; +#53189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53190 = VERTEX_POINT ( 'NONE', #26554 ) ; +#53191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53192 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499978900, 61.76337688193794400, -28.37223523914908100 ) ) ; +#53193 = ORIENTED_EDGE ( 'NONE', *, *, #44128, .F. ) ; +#53194 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53195 = EDGE_CURVE ( 'NONE', #28856, #10125, #54625, .T. ) ; +#53196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53197 = EDGE_CURVE ( 'NONE', #34215, #49395, #59034, .T. ) ; +#53198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53199 = CIRCLE ( 'NONE', #61137, 10.00000000000009600 ) ; +#53200 = AXIS2_PLACEMENT_3D ( 'NONE', #66947, #29713, #73203 ) ; +#53201 = CARTESIAN_POINT ( 'NONE', ( -4.957239735864543000, 75.79999999999999700, -28.53819074160684000 ) ) ; +#53202 = ORIENTED_EDGE ( 'NONE', *, *, #16889, .T. ) ; +#53203 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.86203212531320600, -28.38801640354856200 ) ) ; +#53204 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 67.83333333333334300, -2.545304000185615800 ) ) ; +#53205 = ORIENTED_EDGE ( 'NONE', *, *, #40449, .F. ) ; +#53206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53207 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53208 = ORIENTED_EDGE ( 'NONE', *, *, #21061, .T. ) ; +#53209 = ORIENTED_EDGE ( 'NONE', *, *, #35256, .T. ) ; +#53210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53211 = CIRCLE ( 'NONE', #8301, 9.500000000000097700 ) ; +#53212 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661482500, 20.60677350908857600, -28.30799595738880800 ) ) ; +#53213 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079885500, 18.16616330387869400, -28.27375072930953000 ) ) ; +#53214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53216 = EDGE_LOOP ( 'NONE', ( #39244, #35064, #16497 ) ) ; +#53215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53217 = AXIS2_PLACEMENT_3D ( 'NONE', #25071, #68591, #31342 ) ; +#53218 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576918600, 35.05000000000000400, -28.65220501466659200 ) ) ; +#53219 = ORIENTED_EDGE ( 'NONE', *, *, #79565, .F. ) ; +#53220 = EDGE_CURVE ( 'NONE', #57257, #68932, #55121, .T. ) ; +#53221 = EDGE_CURVE ( 'NONE', #8438, #21929, #40148, .T. ) ; +#53222 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 73.67681279774498600, -28.70555803802997700 ) ) ; +#53223 = EDGE_CURVE ( 'NONE', #66219, #36794, #25733, .T. ) ; +#53224 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#53225 = CARTESIAN_POINT ( 'NONE', ( 11.23081175365672200, 50.94994472024608000, -28.43636979168679300 ) ) ; +#53226 = LINE ( 'NONE', #160, #73699 ) ; +#53227 = CARTESIAN_POINT ( 'NONE', ( 16.53469939396887900, 9.232650303015562400, -28.58709120703529600 ) ) ; +#53228 = ORIENTED_EDGE ( 'NONE', *, *, #67746, .T. ) ; +#53229 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.718202300015086300E-014, 0.0000000000000000000 ) ) ; +#53230 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 70.16749699759739700, -28.20555803803047800 ) ) ; +#53231 = AXIS2_PLACEMENT_3D ( 'NONE', #27005, #20734, #45425 ) ; +#53232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53233 = VERTEX_POINT ( 'NONE', #20811 ) ; +#53234 = CIRCLE ( 'NONE', #46413, 10.50000000000009600 ) ; +#53235 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#53236 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#53237 = FACE_OUTER_BOUND ( 'NONE', #15989, .T. ) ; +#53238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53239 = EDGE_CURVE ( 'NONE', #59810, #30007, #9379, .T. ) ; +#53240 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53241 = AXIS2_PLACEMENT_3D ( 'NONE', #39849, #21376, #77123 ) ; +#53242 = AXIS2_PLACEMENT_3D ( 'NONE', #27179, #14919, #8635 ) ; +#53243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#53244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53245 = EDGE_LOOP ( 'NONE', ( #59340, #47394, #29308, #38260, #47744 ) ) ; +#53246 = ADVANCED_FACE ( 'NONE', ( #71692 ), #69717, .T. ) ; +#53247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53248 = FACE_OUTER_BOUND ( 'NONE', #52723, .T. ) ; +#53250 = ORIENTED_EDGE ( 'NONE', *, *, #69581, .F. ) ; +#53249 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819507300, 81.65075715145330500, -28.20555803802997700 ) ) ; +#53251 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849329500, 30.82033471810042600, -28.30868034705249800 ) ) ; +#53252 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 5.000000000000010700, -1.205558038030002800 ) ) ; +#53253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69109, #25619, #75368, #38077 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951557060200E-007, 0.0007331043932795528500 ), + .UNSPECIFIED. ) ; +#53254 = ORIENTED_EDGE ( 'NONE', *, *, #30289, .F. ) ; +#53255 = CARTESIAN_POINT ( 'NONE', ( -2.487278546917065700, 81.47860033657563900, -28.56001054660900000 ) ) ; +#53256 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22520, #16528, #35320, #78827 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-018, 0.002676326193402466900 ), + .UNSPECIFIED. ) ; +#53257 = ORIENTED_EDGE ( 'NONE', *, *, #18412, .F. ) ; +#53258 = ADVANCED_FACE ( 'NONE', ( #73644 ), #21101, .T. ) ; +#53259 = LINE ( 'NONE', #12828, #3609 ) ; +#53260 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 39.33333333333333600, 1.294441961969997200 ) ) ; +#53261 = AXIS2_PLACEMENT_3D ( 'NONE', #20006, #14005, #1475 ) ; +#53262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53263 = EDGE_LOOP ( 'NONE', ( #18990, #46620, #48675 ) ) ; +#53264 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609138100, 90.13716795162604000, -28.48697406221693000 ) ) ; +#53265 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 4.333333333333341900, 2.794441961969998300 ) ) ; +#53266 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80200, #36677, #74245, #36936 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.044427344733911300E-017, 0.001246264537621179100 ), + .UNSPECIFIED. ) ; +#53267 = AXIS2_PLACEMENT_3D ( 'NONE', #56522, #19263, #62804 ) ; +#53268 = CONICAL_SURFACE ( 'NONE', #45809, 10.50000000000009600, 0.7853981633974518300 ) ; +#53269 = ORIENTED_EDGE ( 'NONE', *, *, #77261, .F. ) ; +#53270 = CARTESIAN_POINT ( 'NONE', ( 7.690777826586627300, 44.45000000000001000, 3.084667325361498200 ) ) ; +#53271 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#53272 = EDGE_CURVE ( 'NONE', #30284, #9345, #57095, .T. ) ; +#53273 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 41.66666666666667900, -10.73183747965883100 ) ) ; +#53274 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53275 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.62753447840926700, -28.38801640354892800 ) ) ; +#53276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53277 = ORIENTED_EDGE ( 'NONE', *, *, #16829, .T. ) ; +#53278 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18267, #55518, #24525, #68035 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003003374200802297400, 0.0008866563355351789500 ), + .UNSPECIFIED. ) ; +#53279 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 47.44142842854307000, -28.20555803802996700 ) ) ; +#53280 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 60.16749699759768800, -28.20555803802997700 ) ) ; +#53281 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 38.97246552159109700, -28.38801640354855500 ) ) ; +#53282 = ADVANCED_FACE ( 'NONE', ( #53167 ), #51168, .F. ) ; +#53283 = CIRCLE ( 'NONE', #40602, 9.500000000000095900 ) ; +#53284 = CONICAL_SURFACE ( 'NONE', #36548, 10.50000000000009600, 0.7853981633974500600 ) ; +#53285 = EDGE_LOOP ( 'NONE', ( #72032, #5756, #42886, #35787, #56730 ) ) ; +#53286 = EDGE_LOOP ( 'NONE', ( #32288, #43477, #29613, #57825, #35172 ) ) ; +#53287 = AXIS2_PLACEMENT_3D ( 'NONE', #23384, #60661, #35885 ) ; +#53288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53290 = ORIENTED_EDGE ( 'NONE', *, *, #7454, .F. ) ; +#53291 = EDGE_LOOP ( 'NONE', ( #45936, #13515, #75693 ) ) ; +#53292 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#53293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53294 = ORIENTED_EDGE ( 'NONE', *, *, #73610, .T. ) ; +#53295 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999100, 60.24722181384566300, -28.70555803802999500 ) ) ; +#53296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#53298 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#53299 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53300 = EDGE_LOOP ( 'NONE', ( #34256, #17881, #26219, #24195, #44718, #70744 ) ) ; +#53301 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388400, 39.16349705304866500, -28.30782889147481300 ) ) ; +#53302 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15907, #28191, #22175, #65698 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001333132141653070500 ), + .UNSPECIFIED. ) ; +#53303 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122155200, 41.02667319908791700, -28.37233769390156000 ) ) ; +#53304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53305 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53306 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#53307 = FACE_OUTER_BOUND ( 'NONE', #60264, .T. ) ; +#53308 = EDGE_CURVE ( 'NONE', #62166, #71936, #3527, .T. ) ; +#53309 = ORIENTED_EDGE ( 'NONE', *, *, #56275, .F. ) ; +#53310 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 45.16666666666665000, 6.794441961969992500 ) ) ; +#53311 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#53312 = VERTEX_POINT ( 'NONE', #64896 ) ; +#53313 = EDGE_CURVE ( 'NONE', #76141, #40334, #11268, .T. ) ; +#53314 = FACE_OUTER_BOUND ( 'NONE', #64540, .T. ) ; +#53315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53317 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571893300, 90.07141756547885300, -28.70555803803014400 ) ) ; +#53318 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#53319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53320 = EDGE_CURVE ( 'NONE', #42509, #54501, #20105, .T. ) ; +#53321 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53322 = ORIENTED_EDGE ( 'NONE', *, *, #63264, .T. ) ; +#53323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53324 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957694600, 11.09027028261031100, -28.70555803803018000 ) ) ; +#53325 = EDGE_CURVE ( 'NONE', #46727, #57484, #67785, .T. ) ; +#53326 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 53.83333333333334300, 0.9380355014189729600 ) ) ; +#53327 = EDGE_CURVE ( 'NONE', #66932, #55930, #77567, .T. ) ; +#53328 = CIRCLE ( 'NONE', #47887, 10.00000000000009200 ) ; +#53329 = ORIENTED_EDGE ( 'NONE', *, *, #52279, .F. ) ; +#53330 = ORIENTED_EDGE ( 'NONE', *, *, #41561, .F. ) ; +#53331 = ORIENTED_EDGE ( 'NONE', *, *, #58472, .F. ) ; +#53332 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53333 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 10.33333333333334600, -8.133761268305512700 ) ) ; +#53334 = CARTESIAN_POINT ( 'NONE', ( 24.29160239825481700, 96.24574262840954500, -22.40710797942077900 ) ) ; +#53335 = CIRCLE ( 'NONE', #2886, 10.50000000000009200 ) ; +#53336 = AXIS2_PLACEMENT_3D ( 'NONE', #42199, #79507, #11243 ) ; +#53337 = EDGE_CURVE ( 'NONE', #50238, #60076, #63108, .T. ) ; +#53338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53339 = EDGE_CURVE ( 'NONE', #5650, #36682, #22057, .T. ) ; +#53340 = EDGE_CURVE ( 'NONE', #20372, #66219, #48609, .T. ) ; +#53341 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53342 = ADVANCED_FACE ( 'NONE', ( #5501 ), #32722, .T. ) ; +#53343 = AXIS2_PLACEMENT_3D ( 'NONE', #21625, #27897, #8792 ) ; +#53344 = CIRCLE ( 'NONE', #54665, 10.50000000000009600 ) ; +#53345 = VERTEX_POINT ( 'NONE', #47135 ) ; +#53346 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#53347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53348 = ORIENTED_EDGE ( 'NONE', *, *, #64553, .T. ) ; +#53349 = EDGE_LOOP ( 'NONE', ( #17103, #52897, #36306, #69504 ) ) ; +#53350 = ADVANCED_FACE ( 'NONE', ( #18142 ), #16172, .T. ) ; +#53351 = AXIS2_PLACEMENT_3D ( 'NONE', #74026, #36725, #80254 ) ; +#53352 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 13.66666666666667500, 1.294441961969997200 ) ) ; +#53353 = AXIS2_PLACEMENT_3D ( 'NONE', #26823, #57821, #64102 ) ; +#53354 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819155100, 61.65075715145276500, -28.20555803803005900 ) ) ; +#53355 = AXIS2_PLACEMENT_3D ( 'NONE', #63907, #45065, #20380 ) ; +#53356 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#53357 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53359 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 53.83333333333335700, 0.9380355014189731800 ) ) ; +#53360 = CONICAL_SURFACE ( 'NONE', #62390, 10.50000000000009600, 0.7853981633974500600 ) ; +#53361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59718, #16192, #28742, #72239 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001333132141653827500 ), + .UNSPECIFIED. ) ; +#53362 = CONICAL_SURFACE ( 'NONE', #3666, 10.50000000000009200, 0.7853981633974482800 ) ; +#53363 = ORIENTED_EDGE ( 'NONE', *, *, #44923, .T. ) ; +#53364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53365 = ORIENTED_EDGE ( 'NONE', *, *, #28940, .F. ) ; +#53366 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466625000, 30.26893971291459100, -28.57333386111660900 ) ) ; +#53367 = ORIENTED_EDGE ( 'NONE', *, *, #69326, .T. ) ; +#53368 = ADVANCED_FACE ( 'NONE', ( #1576 ), #63897, .F. ) ; +#53369 = ORIENTED_EDGE ( 'NONE', *, *, #13438, .T. ) ; +#53370 = EDGE_LOOP ( 'NONE', ( #2944, #11999, #54558, #74958 ) ) ; +#53371 = ORIENTED_EDGE ( 'NONE', *, *, #59561, .T. ) ; +#53372 = ORIENTED_EDGE ( 'NONE', *, *, #58743, .T. ) ; +#53373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53374 = ORIENTED_EDGE ( 'NONE', *, *, #47100, .F. ) ; +#53376 = ORIENTED_EDGE ( 'NONE', *, *, #45064, .T. ) ; +#53375 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528388900, 41.46868088498140300, -28.51286550264485000 ) ) ; +#53377 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000500500, 70.69949493661175700, -28.70555803803014400 ) ) ; +#53378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53379 = ORIENTED_EDGE ( 'NONE', *, *, #4930, .F. ) ; +#53380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46949, #15979, #65770, #28538 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0005441443751743810200, 0.0008182951912486320800 ), + .UNSPECIFIED. ) ; +#53381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53382 = ADVANCED_FACE ( 'NONE', ( #65849 ), #30801, .T. ) ; +#53383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53385 = ORIENTED_EDGE ( 'NONE', *, *, #11549, .T. ) ; +#53386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53387 = FACE_OUTER_BOUND ( 'NONE', #20045, .T. ) ; +#53388 = ORIENTED_EDGE ( 'NONE', *, *, #55810, .F. ) ; +#53389 = EDGE_LOOP ( 'NONE', ( #56881, #35196, #41, #53740 ) ) ; +#53390 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53391 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#53392 = EDGE_CURVE ( 'NONE', #44982, #35530, #49242, .T. ) ; +#53393 = ORIENTED_EDGE ( 'NONE', *, *, #8835, .T. ) ; +#53394 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14593, #51810, #64398, #27118 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549640834500E-007, 0.0008759529789575486400 ), + .UNSPECIFIED. ) ; +#53395 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53396 = AXIS2_PLACEMENT_3D ( 'NONE', #79962, #61211, #36416 ) ; +#53397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53398 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702742000, 62.22511094383837400, -28.55192314908416800 ) ) ; +#53399 = CIRCLE ( 'NONE', #46337, 10.00000000000009200 ) ; +#53400 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655695300, 10.17701665379238400, -28.20555803802992800 ) ) ; +#53401 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150911700, 28.77966528189938300, -28.30868034705269700 ) ) ; +#53402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53403 = ORIENTED_EDGE ( 'NONE', *, *, #39247, .T. ) ; +#53404 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53405 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47978, #10761, #54251, #17017 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534758500 ), + .UNSPECIFIED. ) ; +#53406 = VERTEX_POINT ( 'NONE', #53683 ) ; +#53407 = CARTESIAN_POINT ( 'NONE', ( 4.118935526109081200, 80.49763722318493800, -28.32100408376095800 ) ) ; +#53408 = CARTESIAN_POINT ( 'NONE', ( 10.12141251449988700, 89.83662311806176600, -28.37223523914902000 ) ) ; +#53409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53410 = CARTESIAN_POINT ( 'NONE', ( -23.53553390593273100, 100.1355339059327300, -23.91561187082989900 ) ) ; +#53411 = AXIS2_PLACEMENT_3D ( 'NONE', #36830, #80366, #43086 ) ; +#53412 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973500, 85.15853008474745400, -28.52629299565633000 ) ) ; +#53413 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.16749699759769500, -28.20555803802997700 ) ) ; +#53414 = CIRCLE ( 'NONE', #35888, 10.00000000000009600 ) ; +#53415 = ORIENTED_EDGE ( 'NONE', *, *, #47596, .T. ) ; +#53416 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53417 = ORIENTED_EDGE ( 'NONE', *, *, #18984, .T. ) ; +#53418 = ORIENTED_EDGE ( 'NONE', *, *, #49330, .F. ) ; +#53419 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298136500, 85.79999999999967000, -28.70555803803030800 ) ) ; +#53420 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825238600, 61.43945992495532900, -28.34042301926881200 ) ) ; +#53421 = AXIS2_PLACEMENT_3D ( 'NONE', #30259, #73755, #67479 ) ; +#53422 = EDGE_CURVE ( 'NONE', #3340, #38738, #34180, .T. ) ; +#53423 = CIRCLE ( 'NONE', #59323, 10.00000000000009200 ) ; +#53424 = FACE_OUTER_BOUND ( 'NONE', #57832, .T. ) ; +#53425 = ORIENTED_EDGE ( 'NONE', *, *, #65456, .F. ) ; +#53426 = EDGE_LOOP ( 'NONE', ( #27954, #48122, #8326, #59411, #37653 ) ) ; +#53427 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 59.83333333333335000, 6.794441961969992500 ) ) ; +#53428 = ORIENTED_EDGE ( 'NONE', *, *, #33667, .T. ) ; +#53429 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 51.43250300240229900, -28.20555803802997700 ) ) ; +#53430 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69627, #26142, #38596, #1343 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849904600, 0.0007596411030281015900 ), + .UNSPECIFIED. ) ; +#53431 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473788300, 38.73827450271181800, -28.47230003642365000 ) ) ; +#53432 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#53433 = ADVANCED_FACE ( 'NONE', ( #47293 ), #61947, .F. ) ; +#53434 = CIRCLE ( 'NONE', #19626, 10.50000000000009600 ) ; +#53435 = ORIENTED_EDGE ( 'NONE', *, *, #63728, .F. ) ; +#53436 = CIRCLE ( 'NONE', #37494, 10.50000000000009600 ) ; +#53437 = ORIENTED_EDGE ( 'NONE', *, *, #38696, .F. ) ; +#53439 = EDGE_CURVE ( 'NONE', #38080, #78012, #19725, .T. ) ; +#53438 = EDGE_LOOP ( 'NONE', ( #11719, #9682, #78636, #8408 ) ) ; +#53440 = EDGE_CURVE ( 'NONE', #39289, #46457, #78495, .T. ) ; +#53441 = ORIENTED_EDGE ( 'NONE', *, *, #57182, .T. ) ; +#53442 = CARTESIAN_POINT ( 'NONE', ( -2.651444164861583600, 8.144909198925935500, -28.55411387316860000 ) ) ; +#53443 = FACE_OUTER_BOUND ( 'NONE', #37881, .T. ) ; +#53444 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907236300E-015, 54.00000000000002800, -9.205558038030011000 ) ) ; +#53445 = ORIENTED_EDGE ( 'NONE', *, *, #14638, .T. ) ; +#53446 = VERTEX_POINT ( 'NONE', #66479 ) ; +#53447 = ORIENTED_EDGE ( 'NONE', *, *, #24039, .T. ) ; +#53448 = ORIENTED_EDGE ( 'NONE', *, *, #72536, .F. ) ; +#53449 = ORIENTED_EDGE ( 'NONE', *, *, #17121, .T. ) ; +#53450 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679516300, 60.51916201875676600, -28.45106778992441200 ) ) ; +#53451 = ORIENTED_EDGE ( 'NONE', *, *, #18108, .T. ) ; +#53452 = ADVANCED_FACE ( 'NONE', ( #16198 ), #12305, .F. ) ; +#53453 = AXIS2_PLACEMENT_3D ( 'NONE', #21865, #65410, #28155 ) ; +#53454 = ORIENTED_EDGE ( 'NONE', *, *, #61228, .F. ) ; +#53455 = EDGE_CURVE ( 'NONE', #20051, #23867, #5260, .T. ) ; +#53456 = EDGE_CURVE ( 'NONE', #39293, #57039, #71590, .T. ) ; +#53457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53458 = EDGE_CURVE ( 'NONE', #71715, #19682, #45330, .T. ) ; +#53459 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#53460 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#53461 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489654800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#53462 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 31.16666666666667100, -12.20555803803000000 ) ) ; +#53463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53464 = EDGE_CURVE ( 'NONE', #49449, #12178, #14236, .T. ) ; +#53465 = FACE_OUTER_BOUND ( 'NONE', #9749, .T. ) ; +#53466 = AXIS2_PLACEMENT_3D ( 'NONE', #69562, #38524, #26082 ) ; +#53468 = VERTEX_POINT ( 'NONE', #79526 ) ; +#53467 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53469 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53470 = ORIENTED_EDGE ( 'NONE', *, *, #54499, .F. ) ; +#53471 = ORIENTED_EDGE ( 'NONE', *, *, #18778, .T. ) ; +#53472 = ADVANCED_FACE ( 'NONE', ( #36624 ), #26896, .T. ) ; +#53473 = ORIENTED_EDGE ( 'NONE', *, *, #24963, .F. ) ; +#53474 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53476 = CARTESIAN_POINT ( 'NONE', ( 17.24454976001801400, 8.877725119990993000, -28.45040264298925300 ) ) ; +#53477 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53478 = ADVANCED_FACE ( 'NONE', ( #80435 ), #74579, .T. ) ; +#53479 = CONICAL_SURFACE ( 'NONE', #30226, 10.00000000000009400, 0.7853981633974447300 ) ; +#53480 = AXIS2_PLACEMENT_3D ( 'NONE', #46122, #52658, #77429 ) ; +#53481 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53482 = AXIS2_PLACEMENT_3D ( 'NONE', #38215, #44447, #75496 ) ; +#53483 = ORIENTED_EDGE ( 'NONE', *, *, #41743, .F. ) ; +#53484 = ADVANCED_FACE ( 'NONE', ( #59992 ), #41468, .T. ) ; +#53485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53486 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883558600, 30.89435118792235400, -28.41114655922301000 ) ) ; +#53487 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146656900, 20.79130857014956700, -28.37223374938506400 ) ) ; +#53488 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686867800, 61.58005252438383800, -28.24986299608865200 ) ) ; +#53489 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 65.66666666666668600, 1.294441961969997200 ) ) ; +#53490 = CIRCLE ( 'NONE', #61418, 10.50000000000009900 ) ; +#53491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53492 = EDGE_LOOP ( 'NONE', ( #182, #77809, #21901 ) ) ; +#53493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78787, #35273, #47724, #10497 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137485895400 ), + .UNSPECIFIED. ) ; +#53494 = ORIENTED_EDGE ( 'NONE', *, *, #79893, .T. ) ; +#53495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53496 = EDGE_LOOP ( 'NONE', ( #73453, #56378, #70926 ) ) ; +#53497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53499 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#53500 = AXIS2_PLACEMENT_3D ( 'NONE', #54366, #4608, #10878 ) ; +#53501 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#53502 = EDGE_CURVE ( 'NONE', #71810, #51916, #58015, .T. ) ; +#53503 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769043000, 50.28860447109612900, -28.53900456328628400 ) ) ; +#53504 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53505 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326900, 60.79999999999991200, -28.55171188418385200 ) ) ; +#53506 = FACE_OUTER_BOUND ( 'NONE', #7226, .T. ) ; +#53507 = EDGE_CURVE ( 'NONE', #55080, #27401, #57119, .T. ) ; +#53508 = CONICAL_SURFACE ( 'NONE', #68151, 10.00000000000009200, 0.7853981633974447300 ) ; +#53509 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53510 = AXIS2_PLACEMENT_3D ( 'NONE', #35113, #78626, #41330 ) ; +#53511 = EDGE_LOOP ( 'NONE', ( #45348, #23748, #26496 ) ) ; +#53512 = AXIS2_PLACEMENT_3D ( 'NONE', #22344, #65880, #28650 ) ; +#53513 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686889100, 90.01994747561644800, -28.24986299608865200 ) ) ; +#53514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53515 = ORIENTED_EDGE ( 'NONE', *, *, #37946, .F. ) ; +#53516 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#53517 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 30.74660241562181900, -28.20555803802995200 ) ) ; +#53518 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9529, #9245, #15794, #59315 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215293267200E-007, 0.0007606633682806903000 ), + .UNSPECIFIED. ) ; +#53519 = FACE_OUTER_BOUND ( 'NONE', #63546, .T. ) ; +#53520 = ORIENTED_EDGE ( 'NONE', *, *, #52220, .F. ) ; +#53521 = CONICAL_SURFACE ( 'NONE', #68738, 10.00000000000009200, 0.7853981633974447300 ) ; +#53522 = AXIS2_PLACEMENT_3D ( 'NONE', #10261, #53761, #16514 ) ; +#53523 = VERTEX_POINT ( 'NONE', #42772 ) ; +#53524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53525 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53526 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 55.79999999999999000, -28.20555803802997700 ) ) ; +#53527 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 2.833333333333339700, -4.152999154772353500 ) ) ; +#53528 = ORIENTED_EDGE ( 'NONE', *, *, #39249, .T. ) ; +#53529 = CIRCLE ( 'NONE', #51642, 10.50000000000009600 ) ; +#53530 = ORIENTED_EDGE ( 'NONE', *, *, #5315, .T. ) ; +#53531 = EDGE_LOOP ( 'NONE', ( #67863, #47794, #56362 ) ) ; +#53532 = VERTEX_POINT ( 'NONE', #30316 ) ; +#53533 = VERTEX_POINT ( 'NONE', #48997 ) ; +#53535 = ORIENTED_EDGE ( 'NONE', *, *, #42364, .T. ) ; +#53534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53536 = VERTEX_POINT ( 'NONE', #5257 ) ; +#53537 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 37.16666666666669300, -2.545304000185620600 ) ) ; +#53538 = AXIS2_PLACEMENT_3D ( 'NONE', #4511, #10781, #41762 ) ; +#53539 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 71.52858243452104100, -28.70555803802997700 ) ) ; +#53540 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187868100, 41.60186521182827600, -28.24089224568490800 ) ) ; +#53541 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31772, #75019, #44222, #6996 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.134355298878496100E-016, 0.001246264537621177800 ), + .UNSPECIFIED. ) ; +#53542 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53543 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 2.166666666666683400, -3.349151577478988200 ) ) ; +#53544 = VERTEX_POINT ( 'NONE', #55282 ) ; +#53545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53546 = CIRCLE ( 'NONE', #34402, 10.50000000000009600 ) ; +#53547 = EDGE_CURVE ( 'NONE', #47514, #56473, #42633, .T. ) ; +#53548 = ORIENTED_EDGE ( 'NONE', *, *, #4007, .T. ) ; +#53549 = ORIENTED_EDGE ( 'NONE', *, *, #41380, .F. ) ; +#53550 = CARTESIAN_POINT ( 'NONE', ( 8.635554319071289300, 44.44999999999999600, -4.733222893268003200 ) ) ; +#53551 = VERTEX_POINT ( 'NONE', #74083 ) ; +#53552 = VERTEX_POINT ( 'NONE', #36783 ) ; +#53553 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 39.50000000000000700, 6.847000845227646500 ) ) ; +#53554 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511880600, 51.99560977511662000, -28.70555803802997700 ) ) ; +#53555 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53556 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 80.34267608797598800, -28.20555803802997700 ) ) ; +#53557 = CONICAL_SURFACE ( 'NONE', #76979, 10.50000000000009600, 0.7853981633974518300 ) ; +#53558 = ORIENTED_EDGE ( 'NONE', *, *, #22726, .F. ) ; +#53559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53560 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53562 = ORIENTED_EDGE ( 'NONE', *, *, #55695, .T. ) ; +#53561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53563 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53564 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492444200, 30.39456479767167000, -28.70555803802995200 ) ) ; +#53565 = EDGE_CURVE ( 'NONE', #65491, #61765, #28237, .T. ) ; +#53566 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 20.44069092601379400, -28.35186440610856100 ) ) ; +#53567 = FACE_OUTER_BOUND ( 'NONE', #15823, .T. ) ; +#53568 = ORIENTED_EDGE ( 'NONE', *, *, #1014, .T. ) ; +#53569 = CARTESIAN_POINT ( 'NONE', ( -3.242975574465502700, 80.16517473503391500, -28.29551658696704700 ) ) ; +#53570 = EDGE_CURVE ( 'NONE', #5869, #39795, #43405, .T. ) ; +#53571 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32651, #69903, #38872, #1635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549584929701800E-007, 0.0002592578639937780400 ), + .UNSPECIFIED. ) ; +#53572 = ORIENTED_EDGE ( 'NONE', *, *, #14253, .F. ) ; +#53573 = PLANE ( 'NONE', #68353 ) ; +#53574 = CARTESIAN_POINT ( 'NONE', ( -15.07025710783655000, 9.859485784326885500, -28.70457077705549100 ) ) ; +#53575 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#53576 = ADVANCED_FACE ( 'NONE', ( #76496 ), #56058, .F. ) ; +#53577 = EDGE_CURVE ( 'NONE', #29955, #53312, #72639, .T. ) ; +#53578 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#53579 = ADVANCED_FACE ( 'NONE', ( #10344 ), #6431, .T. ) ; +#53580 = CARTESIAN_POINT ( 'NONE', ( -16.68942240455975300, 57.07608412203502700, -28.56336785413097700 ) ) ; +#53581 = EDGE_CURVE ( 'NONE', #14507, #14529, #22985, .T. ) ; +#53582 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801530200, 50.90033558196108000, -28.70555803802997700 ) ) ; +#53583 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53584 = AXIS2_PLACEMENT_3D ( 'NONE', #48178, #10974, #54470 ) ; +#53585 = LINE ( 'NONE', #59689, #55523 ) ; +#53586 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 43.00000000000000700, -9.205558038030005700 ) ) ; +#53587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53588 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#53589 = ORIENTED_EDGE ( 'NONE', *, *, #34871, .F. ) ; +#53590 = ORIENTED_EDGE ( 'NONE', *, *, #48508, .T. ) ; +#53591 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385200, 41.43650294695131500, -28.30782889147482400 ) ) ; +#53592 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 26.66545993132819000, -28.70555803802997700 ) ) ; +#53593 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.321694076934681800E-014, 0.0000000000000000000 ) ) ; +#53594 = AXIS2_PLACEMENT_3D ( 'NONE', #48814, #11601, #55090 ) ; +#53595 = CARTESIAN_POINT ( 'NONE', ( 1.602015045862687800, 57.15000000000002000, 6.924969647806870300 ) ) ; +#53596 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#53597 = EDGE_CURVE ( 'NONE', #54160, #26934, #13763, .T. ) ; +#53598 = ADVANCED_FACE ( 'NONE', ( #34697 ), #37537, .F. ) ; +#53599 = EDGE_CURVE ( 'NONE', #34131, #14656, #54109, .T. ) ; +#53600 = AXIS2_PLACEMENT_3D ( 'NONE', #40593, #34081, #71622 ) ; +#53601 = FACE_OUTER_BOUND ( 'NONE', #14587, .T. ) ; +#53602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53603 = ORIENTED_EDGE ( 'NONE', *, *, #6653, .T. ) ; +#53604 = VERTEX_POINT ( 'NONE', #37568 ) ; +#53605 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 17.98922577050341700, -28.37255355648629200 ) ) ; +#53606 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 56.00000000000000700, -1.205558038030005300 ) ) ; +#53607 = CIRCLE ( 'NONE', #68847, 10.50000000000009600 ) ; +#53608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53609 = ORIENTED_EDGE ( 'NONE', *, *, #12722, .F. ) ; +#53610 = CARTESIAN_POINT ( 'NONE', ( -17.03177803894783100, 70.28233213024648800, -28.25051428653848600 ) ) ; +#53611 = ORIENTED_EDGE ( 'NONE', *, *, #70913, .T. ) ; +#53612 = ORIENTED_EDGE ( 'NONE', *, *, #14512, .T. ) ; +#53613 = ORIENTED_EDGE ( 'NONE', *, *, #10799, .F. ) ; +#53614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53616 = VERTEX_POINT ( 'NONE', #25095 ) ; +#53615 = EDGE_CURVE ( 'NONE', #61214, #10560, #39503, .T. ) ; +#53617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53618 = AXIS2_PLACEMENT_3D ( 'NONE', #52197, #8694, #27242 ) ; +#53619 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846179900, 70.79999999999982700, -28.55171188418389900 ) ) ; +#53620 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16605, #22858, #78908, #41609 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.002676326193402455200 ), + .UNSPECIFIED. ) ; +#53621 = FACE_OUTER_BOUND ( 'NONE', #27472, .T. ) ; +#53622 = EDGE_LOOP ( 'NONE', ( #25904, #4208, #71185, #28098 ) ) ; +#53623 = VERTEX_POINT ( 'NONE', #31632 ) ; +#53624 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671691300, 69.66414768974019000, -28.38420446581311700 ) ) ; +#53625 = ORIENTED_EDGE ( 'NONE', *, *, #5002, .F. ) ; +#53626 = VERTEX_POINT ( 'NONE', #326 ) ; +#53627 = ORIENTED_EDGE ( 'NONE', *, *, #57517, .F. ) ; +#53628 = ORIENTED_EDGE ( 'NONE', *, *, #12504, .T. ) ; +#53629 = FACE_OUTER_BOUND ( 'NONE', #59648, .T. ) ; +#53630 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 11.50000000000000500, -4.865812075874393000 ) ) ; +#53631 = ORIENTED_EDGE ( 'NONE', *, *, #75152, .F. ) ; +#53632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53634 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 51.66666666666667900, -5.205558038030003100 ) ) ; +#53635 = EDGE_LOOP ( 'NONE', ( #6323, #73306, #73242 ) ) ; +#53636 = AXIS2_PLACEMENT_3D ( 'NONE', #54713, #60725, #17466 ) ; +#53637 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#53638 = FACE_OUTER_BOUND ( 'NONE', #70427, .T. ) ; +#53639 = ORIENTED_EDGE ( 'NONE', *, *, #29199, .F. ) ; +#53640 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53641 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#53642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53643 = AXIS2_PLACEMENT_3D ( 'NONE', #26274, #69747, #32490 ) ; +#53644 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#53645 = ADVANCED_FACE ( 'NONE', ( #28892 ), #52132, .F. ) ; +#53646 = EDGE_CURVE ( 'NONE', #29475, #38695, #68711, .T. ) ; +#53647 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#53648 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019300500, 74.79999999999928700, -28.70555803803047500 ) ) ; +#53649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53650 = AXIS2_PLACEMENT_3D ( 'NONE', #20190, #57444, #63723 ) ; +#53651 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 90.36203212531317800, -28.38801640354855800 ) ) ; +#53652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53653 = ORIENTED_EDGE ( 'NONE', *, *, #68635, .F. ) ; +#53654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53656 = ORIENTED_EDGE ( 'NONE', *, *, #52495, .T. ) ; +#53657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49698, #62263, #68518, #31263 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160285182600, 0.0006028148015512287300 ), + .UNSPECIFIED. ) ; +#53658 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#53659 = ORIENTED_EDGE ( 'NONE', *, *, #67869, .F. ) ; +#53660 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#53661 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#53662 = ADVANCED_FACE ( 'NONE', ( #4471 ), #35640, .T. ) ; +#53663 = CARTESIAN_POINT ( 'NONE', ( 16.72524054195351800, 20.91634594406196600, -28.35038903107271600 ) ) ; +#53664 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530700, 45.55000000000000400, -28.20555803802996700 ) ) ; +#53665 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#53666 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.16749699759768800, -28.20555803802997700 ) ) ; +#53667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53669 = FACE_OUTER_BOUND ( 'NONE', #70354, .T. ) ; +#53670 = ORIENTED_EDGE ( 'NONE', *, *, #25773, .T. ) ; +#53671 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#53672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53673 = ORIENTED_EDGE ( 'NONE', *, *, #29536, .F. ) ; +#53674 = EDGE_CURVE ( 'NONE', #49759, #10918, #21039, .T. ) ; +#53675 = VERTEX_POINT ( 'NONE', #69141 ) ; +#53676 = FACE_OUTER_BOUND ( 'NONE', #43660, .T. ) ; +#53677 = EDGE_CURVE ( 'NONE', #14523, #5570, #80056, .T. ) ; +#53678 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53679 = VERTEX_POINT ( 'NONE', #44336 ) ; +#53680 = ORIENTED_EDGE ( 'NONE', *, *, #20830, .F. ) ; +#53681 = VERTEX_POINT ( 'NONE', #856 ) ; +#53682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53683 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.15857157145701000, -28.20555803802996700 ) ) ; +#53684 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53685 = FACE_OUTER_BOUND ( 'NONE', #66135, .T. ) ; +#53686 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53687 = EDGE_CURVE ( 'NONE', #68696, #42352, #24936, .T. ) ; +#53688 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195592900, 83.65857157145708800, -28.37229765499311900 ) ) ; +#53689 = ADVANCED_FACE ( 'NONE', ( #70657 ), #69400, .T. ) ; +#53690 = EDGE_CURVE ( 'NONE', #27305, #49759, #65610, .T. ) ; +#53692 = ORIENTED_EDGE ( 'NONE', *, *, #50584, .F. ) ; +#53691 = AXIS2_PLACEMENT_3D ( 'NONE', #32270, #19774, #75780 ) ; +#53693 = VECTOR ( 'NONE', #11775, 1000.000000000000000 ) ; +#53694 = ORIENTED_EDGE ( 'NONE', *, *, #52497, .T. ) ; +#53695 = EDGE_LOOP ( 'NONE', ( #19102, #45758, #64330, #22417, #41662, #47374, #60498, #35930 ) ) ; +#53696 = VERTEX_POINT ( 'NONE', #1396 ) ; +#53697 = EDGE_LOOP ( 'NONE', ( #26816, #43348, #15074 ) ) ; +#53698 = EDGE_LOOP ( 'NONE', ( #48114, #38592, #33642 ) ) ; +#53699 = CIRCLE ( 'NONE', #59727, 9.500000000000099500 ) ; +#53700 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 57.66666666666667100, -8.133761268305512700 ) ) ; +#53701 = AXIS2_PLACEMENT_3D ( 'NONE', #71738, #53495, #3698 ) ; +#53702 = EDGE_CURVE ( 'NONE', #75756, #49628, #51076, .T. ) ; +#53703 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#53704 = EDGE_CURVE ( 'NONE', #5611, #56323, #66774, .T. ) ; +#53705 = EDGE_CURVE ( 'NONE', #36198, #22837, #36653, .T. ) ; +#53706 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51600, #76934, #14926, #58437 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001137779926878982600, 0.0003808516268244336400 ), + .UNSPECIFIED. ) ; +#53707 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 87.94142842854296300, -28.20555803802997700 ) ) ; +#53708 = AXIS2_PLACEMENT_3D ( 'NONE', #23043, #54293, #17056 ) ; +#53709 = CONICAL_SURFACE ( 'NONE', #4438, 10.00000000000009200, 0.7853981633974447300 ) ; +#53710 = ORIENTED_EDGE ( 'NONE', *, *, #8985, .F. ) ; +#53712 = ORIENTED_EDGE ( 'NONE', *, *, #26315, .F. ) ; +#53711 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459416700, 62.51973550835649000, -28.70555803803014100 ) ) ; +#53713 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13598, #50793, #26104, #69583 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001246264537621192100 ), + .UNSPECIFIED. ) ; +#53714 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448972200, 51.83333333333333600, 6.794441961970000500 ) ) ; +#53715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27351, #39826, #58591, #21352 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671528707000E-007, 0.0007670610367941799900 ), + .UNSPECIFIED. ) ; +#53716 = EDGE_CURVE ( 'NONE', #24370, #48835, #22207, .T. ) ; +#53717 = AXIS2_PLACEMENT_3D ( 'NONE', #75084, #44021, #56287 ) ; +#53718 = AXIS2_PLACEMENT_3D ( 'NONE', #9217, #52751, #15510 ) ; +#53719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53720 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818145900, 89.94924284854691600, -28.20555803803031100 ) ) ; +#53721 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 69.91070809551072800, -28.20555803803030800 ) ) ; +#53722 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#53723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53724 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 29.00000000000001800, 9.794441961969996100 ) ) ; +#53725 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15798, #59602, #78369, #41089 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331884708700 ), + .UNSPECIFIED. ) ; +#53726 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.62753447840886200, -28.38801640354855500 ) ) ; +#53727 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53728 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#53729 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499837300, 79.83662311806158100, -28.37223523914914100 ) ) ; +#53730 = ORIENTED_EDGE ( 'NONE', *, *, #49222, .T. ) ; +#53731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53732 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53733 = ORIENTED_EDGE ( 'NONE', *, *, #63357, .F. ) ; +#53734 = CARTESIAN_POINT ( 'NONE', ( 9.963744891818969100, 79.94924284854664600, -28.20555803803014100 ) ) ; +#53735 = ADVANCED_FACE ( 'NONE', ( #8347 ), #64840, .F. ) ; +#53736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53737 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 85.79999999999985500, -28.70525300642875200 ) ) ; +#53738 = FACE_OUTER_BOUND ( 'NONE', #31308, .T. ) ; +#53739 = AXIS2_PLACEMENT_3D ( 'NONE', #27569, #33804, #64841 ) ; +#53740 = ORIENTED_EDGE ( 'NONE', *, *, #4468, .F. ) ; +#53741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53742 = CONICAL_SURFACE ( 'NONE', #49289, 10.00000000000009200, 0.7853981633974447300 ) ; +#53743 = ORIENTED_EDGE ( 'NONE', *, *, #24495, .F. ) ; +#53744 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 63.49999999999999300, -4.865812075874393000 ) ) ; +#53745 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#53746 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53747 = CARTESIAN_POINT ( 'NONE', ( 9.716823492900974900, 49.56267502090536700, -28.41043597897461500 ) ) ; +#53748 = CONICAL_SURFACE ( 'NONE', #36138, 10.50000000000009800, 0.7853981633974518300 ) ; +#53749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53750 = EDGE_LOOP ( 'NONE', ( #19577, #58461, #67996, #65839, #63460, #72013 ) ) ; +#53751 = ORIENTED_EDGE ( 'NONE', *, *, #58579, .T. ) ; +#53752 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53753 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042475900, 38.00972971738995900, -28.70555803802994900 ) ) ; +#53754 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53755 = ADVANCED_FACE ( 'NONE', ( #2496 ), #32944, .T. ) ; +#53756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53758 = EDGE_LOOP ( 'NONE', ( #62064, #55024, #47878, #73499, #33326 ) ) ; +#53759 = AXIS2_PLACEMENT_3D ( 'NONE', #50606, #13407, #56905 ) ; +#53760 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#53761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53762 = FACE_OUTER_BOUND ( 'NONE', #62678, .T. ) ; +#53763 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.61077422949656300, -28.37255355648634800 ) ) ; +#53764 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78872, #4837, #23624, #67139 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349242621000E-007, 0.0004318366892326731100 ), + .UNSPECIFIED. ) ; +#53765 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 84.79999999999978400, -28.70555803803030800 ) ) ; +#53766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53767 = ORIENTED_EDGE ( 'NONE', *, *, #68144, .F. ) ; +#53768 = VERTEX_POINT ( 'NONE', #1925 ) ; +#53769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53770 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310703400, 70.10230989102889500, -28.61774594594300700 ) ) ; +#53771 = CONICAL_SURFACE ( 'NONE', #49847, 10.00000000000009200, 0.7853981633974447300 ) ; +#53772 = AXIS2_PLACEMENT_3D ( 'NONE', #44962, #26278, #57249 ) ; +#53773 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53774 = ORIENTED_EDGE ( 'NONE', *, *, #24969, .F. ) ; +#53775 = ADVANCED_FACE ( 'NONE', ( #17138 ), #64262, .T. ) ; +#53776 = VERTEX_POINT ( 'NONE', #33217 ) ; +#53777 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027433700, 89.37488905616122300, -28.55192314908449400 ) ) ; +#53778 = ORIENTED_EDGE ( 'NONE', *, *, #62082, .T. ) ; +#53779 = EDGE_LOOP ( 'NONE', ( #22299, #53371, #75694, #16180 ) ) ; +#53780 = CIRCLE ( 'NONE', #6938, 10.50000000000009600 ) ; +#53781 = ORIENTED_EDGE ( 'NONE', *, *, #15723, .T. ) ; +#53782 = CARTESIAN_POINT ( 'NONE', ( -17.32922790642990700, 51.13127791441742400, -28.43092544535692300 ) ) ; +#53783 = CIRCLE ( 'NONE', #78437, 10.00000000000009200 ) ; +#53784 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#53785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53786 = CARTESIAN_POINT ( 'NONE', ( -16.57123091997351600, 71.47225659168401500, -28.53062721603924200 ) ) ; +#53787 = ADVANCED_FACE ( 'NONE', ( #33669 ), #79418, .F. ) ; +#53788 = VERTEX_POINT ( 'NONE', #45688 ) ; +#53789 = EDGE_CURVE ( 'NONE', #17621, #45995, #7724, .T. ) ; +#53790 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53791 = CONICAL_SURFACE ( 'NONE', #9052, 10.50000000000009600, 0.7853981633974500600 ) ; +#53792 = ORIENTED_EDGE ( 'NONE', *, *, #71569, .T. ) ; +#53793 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 0.6666666666666835100, 4.294441961969993400 ) ) ; +#53794 = EDGE_CURVE ( 'NONE', #72226, #23151, #74087, .T. ) ; +#53795 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 35.00000000000000700, -1.205558038030002800 ) ) ; +#53796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53797 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000047100, 90.34510448120781200, -28.37193179497729600 ) ) ; +#53798 = EDGE_CURVE ( 'NONE', #72415, #64580, #15171, .T. ) ; +#53799 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9331, #65143, #34111, #52856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082045774300E-007, 0.001119323292485892500 ), + .UNSPECIFIED. ) ; +#53800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53801 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 1.387778780781445700E-014, -1.205558038030005300 ) ) ; +#53802 = EDGE_CURVE ( 'NONE', #75158, #69152, #19066, .T. ) ; +#53803 = EDGE_CURVE ( 'NONE', #38287, #11483, #59619, .T. ) ; +#53804 = CARTESIAN_POINT ( 'NONE', ( 2.954824614699703500, 44.45000000000000300, -10.23791206179098800 ) ) ; +#53805 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 37.33333333333334300, -6.705558038030005700 ) ) ; +#53806 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957537400, 38.00972971738994500, -28.70555803802995600 ) ) ; +#53807 = ORIENTED_EDGE ( 'NONE', *, *, #61859, .T. ) ; +#53808 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 39.24722181384565500, -28.70555803802998400 ) ) ; +#53809 = ORIENTED_EDGE ( 'NONE', *, *, #16646, .T. ) ; +#53810 = AXIS2_PLACEMENT_3D ( 'NONE', #14898, #2354, #21170 ) ; +#53811 = EDGE_CURVE ( 'NONE', #79455, #69438, #50180, .T. ) ; +#53812 = CARTESIAN_POINT ( 'NONE', ( 15.32688086116575800, 46.69459997165989800, -28.70130009522702300 ) ) ; +#53813 = EDGE_CURVE ( 'NONE', #22705, #60130, #45081, .T. ) ; +#53814 = EDGE_CURVE ( 'NONE', #67715, #51415, #30692, .T. ) ; +#53815 = ORIENTED_EDGE ( 'NONE', *, *, #4228, .F. ) ; +#53816 = PLANE ( 'NONE', #80517 ) ; +#53817 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389500, 28.66349705304866500, -28.30782889147480900 ) ) ; +#53818 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46032, #2515, #52278, #15055 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693202157600E-007, 0.0008724363063896957100 ), + .UNSPECIFIED. ) ; +#53819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53820 = CONICAL_SURFACE ( 'NONE', #62641, 10.50000000000009600, 0.7853981633974500600 ) ; +#53821 = ORIENTED_EDGE ( 'NONE', *, *, #45905, .F. ) ; +#53822 = CIRCLE ( 'NONE', #62329, 9.500000000000097700 ) ; +#53823 = VERTEX_POINT ( 'NONE', #59037 ) ; +#53824 = AXIS2_PLACEMENT_3D ( 'NONE', #73688, #36389, #79945 ) ; +#53825 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#53826 = VERTEX_POINT ( 'NONE', #21797 ) ; +#53827 = CIRCLE ( 'NONE', #44895, 10.00000000000009400 ) ; +#53828 = PLANE ( 'NONE', #21115 ) ; +#53829 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846183500, 80.79999999999982700, -28.55171188418389100 ) ) ; +#53830 = ORIENTED_EDGE ( 'NONE', *, *, #48666, .F. ) ; +#53831 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004900, 41.43250300240230600, -28.20555803802997700 ) ) ; +#53832 = EDGE_LOOP ( 'NONE', ( #36991, #50129, #61850, #35680 ) ) ; +#53833 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700000, 34.11903418172681800, -28.69431509262337700 ) ) ; +#53834 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 24.54999999999997600, -28.20555803802994200 ) ) ; +#53835 = AXIS2_PLACEMENT_3D ( 'NONE', #33885, #77401, #40132 ) ; +#53836 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#53837 = ORIENTED_EDGE ( 'NONE', *, *, #77526, .F. ) ; +#53838 = AXIS2_PLACEMENT_3D ( 'NONE', #4631, #48118, #10899 ) ; +#53839 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#53840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34511, #9744, #28561, #72046 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823695027924400E-007, 0.0008724363063896163500 ), + .UNSPECIFIED. ) ; +#53841 = FACE_OUTER_BOUND ( 'NONE', #13942, .T. ) ; +#53842 = ADVANCED_FACE ( 'NONE', ( #554 ), #77454, .F. ) ; +#53843 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807171300, 74.80000000000001100, -28.70555803802997700 ) ) ; +#53844 = CARTESIAN_POINT ( 'NONE', ( -16.33099763933874700, 34.47317079140167800, -28.62115403300391800 ) ) ; +#53845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53846 = EDGE_LOOP ( 'NONE', ( #3108, #6956, #11556, #53815 ) ) ; +#53847 = FACE_OUTER_BOUND ( 'NONE', #54858, .T. ) ; +#53848 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 40.83333333333335000, 6.794441961969992500 ) ) ; +#53849 = ORIENTED_EDGE ( 'NONE', *, *, #12968, .F. ) ; +#53850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53851 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274709400, 45.86787096422375500, -28.37244029424744700 ) ) ; +#53853 = ORIENTED_EDGE ( 'NONE', *, *, #30074, .F. ) ; +#53852 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46850, #22139, #40895, #3614 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003978642451280023000, 0.004380845134383041600 ), + .UNSPECIFIED. ) ; +#53854 = ORIENTED_EDGE ( 'NONE', *, *, #24142, .T. ) ; +#53855 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53856 = VERTEX_POINT ( 'NONE', #40534 ) ; +#53857 = CONICAL_SURFACE ( 'NONE', #70542, 10.00000000000009200, 0.7853981633974415100 ) ; +#53858 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53859 = ADVANCED_FACE ( 'NONE', ( #48228 ), #44308, .T. ) ; +#53860 = AXIS2_PLACEMENT_3D ( 'NONE', #65775, #21971, #78284 ) ; +#53861 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 71.62753447840884700, -28.38801640354855100 ) ) ; +#53862 = ORIENTED_EDGE ( 'NONE', *, *, #68046, .T. ) ; +#53863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53864 = CARTESIAN_POINT ( 'NONE', ( -3.721247131899669800, 57.14999999999999900, 7.038299425682551700 ) ) ; +#53865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59574, #78061, #3509, #22294 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647780480400E-007, 0.0007596411030278598200 ), + .UNSPECIFIED. ) ; +#53867 = ORIENTED_EDGE ( 'NONE', *, *, #51496, .T. ) ; +#53868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53869 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428132400, 71.52858243452097000, -28.70555803803030800 ) ) ; +#53870 = ORIENTED_EDGE ( 'NONE', *, *, #56289, .T. ) ; +#53871 = ADVANCED_FACE ( 'NONE', ( #13244 ), #40264, .T. ) ; +#53872 = EDGE_CURVE ( 'NONE', #5295, #2942, #16226, .T. ) ; +#53873 = CIRCLE ( 'NONE', #47132, 10.50000000000009200 ) ; +#53874 = CARTESIAN_POINT ( 'NONE', ( -19.72384517958694200, 7.638330027337339300, -27.52039800012041200 ) ) ; +#53875 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53876 = ADVANCED_FACE ( 'NONE', ( #60934 ), #75494, .T. ) ; +#53877 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53879 = ADVANCED_FACE ( 'NONE', ( #46265 ), #43490, .F. ) ; +#53880 = AXIS2_PLACEMENT_3D ( 'NONE', #52464, #58753, #8949 ) ; +#53881 = CIRCLE ( 'NONE', #14342, 10.50000000000009600 ) ; +#53882 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53883 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53884 = ORIENTED_EDGE ( 'NONE', *, *, #45200, .T. ) ; +#53885 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 9.333333333333346400, 3.124568980892187500 ) ) ; +#53886 = ORIENTED_EDGE ( 'NONE', *, *, #74300, .F. ) ; +#53887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#53888 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61367, #49051, #55326, #18081 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249095000, 0.0008027336008645225500 ), + .UNSPECIFIED. ) ; +#53889 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#53890 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 49.50000000000002100, 4.650848422521012700 ) ) ; +#53891 = CONICAL_SURFACE ( 'NONE', #67296, 10.50000000000009600, 0.7853981633974500600 ) ; +#53892 = EDGE_LOOP ( 'NONE', ( #75286, #35795, #78381, #49914, #244, #9220 ) ) ; +#53893 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428150200, 81.52858243452095600, -28.70555803803030800 ) ) ; +#53894 = CIRCLE ( 'NONE', #54433, 10.00000000000009200 ) ; +#53895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53897 = EDGE_CURVE ( 'NONE', #28971, #50476, #31733, .T. ) ; +#53896 = ORIENTED_EDGE ( 'NONE', *, *, #59046, .F. ) ; +#53898 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 51.62753447840813700, -28.38801640354866900 ) ) ; +#53899 = CIRCLE ( 'NONE', #12072, 10.00000000000009200 ) ; +#53900 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#53901 = ORIENTED_EDGE ( 'NONE', *, *, #57378, .F. ) ; +#53902 = ORIENTED_EDGE ( 'NONE', *, *, #66798, .T. ) ; +#53903 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53904 = ORIENTED_EDGE ( 'NONE', *, *, #74798, .T. ) ; +#53905 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.42856308690589300, -28.36981695106777900 ) ) ; +#53906 = CARTESIAN_POINT ( 'NONE', ( 13.05653207613410800, 9.792414212930761900, -28.70555803803002000 ) ) ; +#53908 = LINE ( 'NONE', #20952, #20836 ) ; +#53907 = CARTESIAN_POINT ( 'NONE', ( -16.02235059838246700, 50.54999999999999700, -28.65316072681825300 ) ) ; +#53909 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#53910 = ORIENTED_EDGE ( 'NONE', *, *, #37836, .F. ) ; +#53911 = EDGE_CURVE ( 'NONE', #70022, #16188, #1734, .T. ) ; +#53912 = FACE_OUTER_BOUND ( 'NONE', #74594, .T. ) ; +#53913 = EDGE_CURVE ( 'NONE', #18101, #53696, #60090, .T. ) ; +#53914 = VERTEX_POINT ( 'NONE', #22590 ) ; +#53915 = PLANE ( 'NONE', #69657 ) ; +#53916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53917 = ORIENTED_EDGE ( 'NONE', *, *, #47338, .F. ) ; +#53918 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188400, 59.60439022488282000, -28.70555803803047500 ) ) ; +#53919 = VERTEX_POINT ( 'NONE', #47298 ) ; +#53920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53921 = ORIENTED_EDGE ( 'NONE', *, *, #35404, .T. ) ; +#53922 = CARTESIAN_POINT ( 'NONE', ( -2.769169305343112800, 70.65007990305433300, -28.43638873268713500 ) ) ; +#53923 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#53924 = CIRCLE ( 'NONE', #27813, 9.500000000000099500 ) ; +#53925 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561200, 85.79999999999998300, -28.70525300642875200 ) ) ; +#53926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53927 = AXIS2_PLACEMENT_3D ( 'NONE', #18962, #62485, #25238 ) ; +#53928 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901141000, 39.06267502090524600, -28.41043597897441200 ) ) ; +#53929 = EDGE_CURVE ( 'NONE', #76283, #30539, #68084, .T. ) ; +#53930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51647, #2160, #20969, #64505 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001020022808752763800, 0.0007606607323828860200 ), + .UNSPECIFIED. ) ; +#53932 = EDGE_CURVE ( 'NONE', #1277, #6326, #29813, .T. ) ; +#53933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53934 = EDGE_CURVE ( 'NONE', #36741, #6854, #53620, .T. ) ; +#53935 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650651300, 31.01912043132466600, -28.30223257055581600 ) ) ; +#53936 = ORIENTED_EDGE ( 'NONE', *, *, #8776, .T. ) ; +#53937 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906786500, 28.42963663972537700, -28.27338767626449800 ) ) ; +#53938 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187871300, 31.10186521182828700, -28.24089224568489700 ) ) ; +#53939 = AXIS2_PLACEMENT_3D ( 'NONE', #10135, #78415, #47347 ) ; +#53940 = ORIENTED_EDGE ( 'NONE', *, *, #16531, .T. ) ; +#53941 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#53942 = ORIENTED_EDGE ( 'NONE', *, *, #27841, .T. ) ; +#53943 = CIRCLE ( 'NONE', #55968, 10.50000000000009600 ) ; +#53944 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11794, #30309, #18038, #61567 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002681079286022299000, 0.0005869108620977115300 ), + .UNSPECIFIED. ) ; +#53945 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217499100, 90.16054007504419600, -28.34042301926922700 ) ) ; +#53946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#53947 = AXIS2_PLACEMENT_3D ( 'NONE', #74034, #42986, #5738 ) ; +#53948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53949 = AXIS2_PLACEMENT_3D ( 'NONE', #47493, #53785, #41263 ) ; +#53950 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 31.17701665379186000, -28.20555803802995200 ) ) ; +#53951 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#53952 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454033300, 62.51973550835640500, -28.70555803803022200 ) ) ; +#53953 = FACE_OUTER_BOUND ( 'NONE', #65363, .T. ) ; +#53954 = EDGE_LOOP ( 'NONE', ( #14446, #41244, #49409, #77416 ) ) ; +#53955 = ADVANCED_FACE ( 'NONE', ( #27844 ), #41567, .T. ) ; +#53956 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 55.49999999999998600, 4.650848422521016300 ) ) ; +#53957 = AXIS2_PLACEMENT_3D ( 'NONE', #14276, #14800, #58323 ) ; +#53958 = EDGE_CURVE ( 'NONE', #74884, #65167, #58109, .T. ) ; +#53959 = VERTEX_POINT ( 'NONE', #60410 ) ; +#53960 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53962 = ORIENTED_EDGE ( 'NONE', *, *, #23100, .T. ) ; +#53961 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#53963 = ADVANCED_FACE ( 'NONE', ( #26995 ), #10622, .T. ) ; +#53964 = FACE_OUTER_BOUND ( 'NONE', #43265, .T. ) ; +#53965 = FACE_OUTER_BOUND ( 'NONE', #43028, .T. ) ; +#53966 = ORIENTED_EDGE ( 'NONE', *, *, #7547, .T. ) ; +#53967 = EDGE_CURVE ( 'NONE', #78600, #63036, #39115, .T. ) ; +#53968 = ORIENTED_EDGE ( 'NONE', *, *, #15681, .F. ) ; +#53969 = CONICAL_SURFACE ( 'NONE', #55773, 10.50000000000009600, 0.7853981633974518300 ) ; +#53970 = CIRCLE ( 'NONE', #79935, 9.500000000000099500 ) ; +#53971 = AXIS2_PLACEMENT_3D ( 'NONE', #1939, #15005, #14731 ) ; +#53972 = ORIENTED_EDGE ( 'NONE', *, *, #65644, .T. ) ; +#53973 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155515000, 85.79999999999967000, -28.20555803803030800 ) ) ; +#53974 = ORIENTED_EDGE ( 'NONE', *, *, #43079, .F. ) ; +#53975 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 79.60439022488334600, -28.70555803802997700 ) ) ; +#53976 = ADVANCED_FACE ( 'NONE', ( #62878 ), #56144, .T. ) ; +#53977 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24531, #74315, #12299, #55784 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747418780735348100E-007, 0.0002745453538439348500 ), + .UNSPECIFIED. ) ; +#53978 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925631200, 48.81967837323416100, -28.55467576046957100 ) ) ; +#53979 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#53980 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 26.83333333333333600, -12.20555803803000600 ) ) ; +#53981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53982 = FACE_OUTER_BOUND ( 'NONE', #77570, .T. ) ; +#53983 = EDGE_LOOP ( 'NONE', ( #12169, #43589, #52634, #73281 ) ) ; +#53984 = AXIS2_PLACEMENT_3D ( 'NONE', #49234, #12022, #55522 ) ; +#53985 = FACE_OUTER_BOUND ( 'NONE', #50256, .T. ) ; +#53986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53987 = ORIENTED_EDGE ( 'NONE', *, *, #54410, .T. ) ; +#53988 = ORIENTED_EDGE ( 'NONE', *, *, #65388, .T. ) ; +#53989 = ORIENTED_EDGE ( 'NONE', *, *, #80409, .T. ) ; +#53990 = EDGE_LOOP ( 'NONE', ( #44118, #63481, #68030 ) ) ; +#53991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53992 = ORIENTED_EDGE ( 'NONE', *, *, #25222, .F. ) ; +#53993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53994 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#53995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53996 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#53997 = ORIENTED_EDGE ( 'NONE', *, *, #67238, .T. ) ; +#53998 = CIRCLE ( 'NONE', #79864, 10.00000000000009400 ) ; +#53999 = ORIENTED_EDGE ( 'NONE', *, *, #17126, .F. ) ; +#54000 = AXIS2_PLACEMENT_3D ( 'NONE', #56580, #19316, #62866 ) ; +#54001 = VERTEX_POINT ( 'NONE', #79423 ) ; +#54002 = CARTESIAN_POINT ( 'NONE', ( -23.53553390593273100, 100.1355339059327300, -23.91561187082989900 ) ) ; +#54003 = ORIENTED_EDGE ( 'NONE', *, *, #49775, .F. ) ; +#54004 = EDGE_LOOP ( 'NONE', ( #29249, #39445, #41903, #11408 ) ) ; +#54005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54006 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#54007 = EDGE_CURVE ( 'NONE', #14833, #28145, #8447, .T. ) ; +#54008 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 61.33333333333334300, 3.124568980892187500 ) ) ; +#54009 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#54010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54011 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#54012 = EDGE_LOOP ( 'NONE', ( #38861, #38266, #26579, #66142 ) ) ; +#54013 = CONICAL_SURFACE ( 'NONE', #43919, 10.50000000000009600, 0.7853981633974500600 ) ; +#54014 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580917400, 16.86736912940423100, -28.67620115463455100 ) ) ; +#54015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39447, #33205, #8430, #51929 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247634500600, 0.0009605145132132173500 ), + .UNSPECIFIED. ) ; +#54016 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54017 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54018 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#54019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19585, #56841, #38311, #1065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936646300, 0.0005776948474817157900 ), + .UNSPECIFIED. ) ; +#54020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54021 = CARTESIAN_POINT ( 'NONE', ( -2.572261083207502800, 8.799999999999828400, -28.63329695482267900 ) ) ; +#54022 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171143700, 19.14330698006849100, -28.57107744631859300 ) ) ; +#54023 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567160700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#54024 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857147100, 61.52858243452073600, -28.70555803803030800 ) ) ; +#54025 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54027 = EDGE_CURVE ( 'NONE', #20207, #77029, #72732, .T. ) ; +#54028 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474188300, 38.73827450271715400, -28.47230003642277300 ) ) ; +#54029 = FACE_OUTER_BOUND ( 'NONE', #44506, .T. ) ; +#54030 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64777, #70993, #46210, #8952 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674239009508600E-007, 0.0007606607323829799200 ), + .UNSPECIFIED. ) ; +#54031 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#54032 = ORIENTED_EDGE ( 'NONE', *, *, #23419, .F. ) ; +#54033 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719592300, 12.15857157145700600, -28.37229765499279200 ) ) ; +#54034 = CIRCLE ( 'NONE', #45738, 10.50000000000009600 ) ; +#54035 = AXIS2_PLACEMENT_3D ( 'NONE', #42011, #4758, #48252 ) ; +#54036 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54037 = EDGE_CURVE ( 'NONE', #17566, #23882, #24697, .T. ) ; +#54038 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#54040 = EDGE_LOOP ( 'NONE', ( #40549, #44199, #30773 ) ) ; +#54039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54041 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 73.43454006867098400, -28.70555803803024400 ) ) ; +#54042 = ADVANCED_FACE ( 'NONE', ( #25028 ), #70749, .T. ) ; +#54043 = EDGE_CURVE ( 'NONE', #76201, #30160, #6522, .T. ) ; +#54044 = CONICAL_SURFACE ( 'NONE', #76565, 10.50000000000009600, 0.7853981633974500600 ) ; +#54045 = FACE_OUTER_BOUND ( 'NONE', #69210, .T. ) ; +#54046 = ORIENTED_EDGE ( 'NONE', *, *, #80557, .F. ) ; +#54047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54048 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#54049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54050 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 67.66666666666665700, -6.705558038030000400 ) ) ; +#54051 = CIRCLE ( 'NONE', #68780, 10.00000000000009200 ) ; +#54052 = EDGE_LOOP ( 'NONE', ( #73534, #59730, #28562 ) ) ; +#54053 = VERTEX_POINT ( 'NONE', #54923 ) ; +#54054 = ADVANCED_FACE ( 'NONE', ( #10437 ), #17684, .T. ) ; +#54055 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 32.83333333333333600, 0.1341879241256075400 ) ) ; +#54056 = AXIS2_PLACEMENT_3D ( 'NONE', #55422, #49407, #74222 ) ; +#54057 = AXIS2_PLACEMENT_3D ( 'NONE', #14991, #58507, #21264 ) ; +#54058 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54060 = EDGE_CURVE ( 'NONE', #22200, #40749, #10241, .T. ) ; +#54061 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6025, #12293, #68299, #31047 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001707792749031566200 ), + .UNSPECIFIED. ) ; +#54063 = CYLINDRICAL_SURFACE ( 'NONE', #48789, 10.00000000000000200 ) ; +#54062 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 59.63176086632794400, -28.70555803802997700 ) ) ; +#54064 = EDGE_CURVE ( 'NONE', #35825, #28926, #76533, .T. ) ; +#54065 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, -2.166666666666653200, 0.9380355014189731800 ) ) ; +#54067 = CONICAL_SURFACE ( 'NONE', #44977, 10.00000000000009600, 0.7853981633974482800 ) ; +#54066 = AXIS2_PLACEMENT_3D ( 'NONE', #41802, #4553, #48038 ) ; +#54068 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660893900, 51.46283204837311600, -28.48697406221719300 ) ) ; +#54069 = ORIENTED_EDGE ( 'NONE', *, *, #45893, .T. ) ; +#54070 = VERTEX_POINT ( 'NONE', #17941 ) ; +#54071 = CARTESIAN_POINT ( 'NONE', ( -6.017423196084910100, 44.44999999999998900, -8.510233996584624100 ) ) ; +#54072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54073 = ORIENTED_EDGE ( 'NONE', *, *, #79383, .T. ) ; +#54074 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 35.16666666666667100, 1.741883078712356500 ) ) ; +#54075 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.79999999999999700, -28.20555803802997700 ) ) ; +#54076 = ORIENTED_EDGE ( 'NONE', *, *, #6957, .F. ) ; +#54077 = ORIENTED_EDGE ( 'NONE', *, *, #40670, .T. ) ; +#54078 = PLANE ( 'NONE', #8922 ) ; +#54079 = ORIENTED_EDGE ( 'NONE', *, *, #41883, .T. ) ; +#54080 = EDGE_CURVE ( 'NONE', #51473, #6326, #62108, .T. ) ; +#54081 = CIRCLE ( 'NONE', #32296, 10.00000000000009200 ) ; +#54082 = AXIS2_PLACEMENT_3D ( 'NONE', #62987, #69229, #19460 ) ; +#54083 = EDGE_LOOP ( 'NONE', ( #22447, #52323, #60703, #54276 ) ) ; +#54084 = AXIS2_PLACEMENT_3D ( 'NONE', #21743, #65286, #28023 ) ; +#54085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54087 = ADVANCED_FACE ( 'NONE', ( #74667 ), #4571, .T. ) ; +#54088 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#54089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54090 = CARTESIAN_POINT ( 'NONE', ( 24.61661399836387400, 5.191729673672028900, -21.45392933964106100 ) ) ; +#54091 = VECTOR ( 'NONE', #14393, 1000.000000000000000 ) ; +#54092 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 67.94142842854287800, -28.20555803803047800 ) ) ; +#54093 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54094 = ORIENTED_EDGE ( 'NONE', *, *, #61014, .F. ) ; +#54095 = CIRCLE ( 'NONE', #27777, 10.00000000000009200 ) ; +#54096 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#54097 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474175900, 10.36172549728292400, -28.47230003642280100 ) ) ; +#54098 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985163800, 23.59761904761934300, -28.70555803802994200 ) ) ; +#54099 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#54100 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#54101 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#54102 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949238800, 42.02620220503713700, -28.70555803802996700 ) ) ; +#54103 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 51.43650294695131500, -28.30782889147482400 ) ) ; +#54104 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571428100, 67.92318720225497900, -28.70555803802997700 ) ) ; +#54105 = AXIS2_PLACEMENT_3D ( 'NONE', #21423, #64954, #27679 ) ; +#54106 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 38.66666666666668600, -8.133761268305512700 ) ) ; +#54107 = CIRCLE ( 'NONE', #2128, 10.50000000000009800 ) ; +#54108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54109 = CIRCLE ( 'NONE', #68128, 10.50000000000009600 ) ; +#54110 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11253, #48460, #17511, #61034 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001043664170964720400 ), + .UNSPECIFIED. ) ; +#54112 = VERTEX_POINT ( 'NONE', #36948 ) ; +#54113 = CIRCLE ( 'NONE', #29623, 10.50000000000006400 ) ; +#54114 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925626800, 21.28032162676582600, -28.55467576046955400 ) ) ; +#54115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54116 = AXIS2_PLACEMENT_3D ( 'NONE', #48879, #42638, #5405 ) ; +#54117 = CARTESIAN_POINT ( 'NONE', ( -8.607425036096193700, 57.15000000000002000, 2.525268775534424700 ) ) ; +#54118 = EDGE_LOOP ( 'NONE', ( #34008, #59998, #64425, #31919 ) ) ; +#54119 = EDGE_CURVE ( 'NONE', #78359, #10423, #11284, .T. ) ; +#54120 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 41.24660241562189400, -28.20555803802996700 ) ) ; +#54121 = CIRCLE ( 'NONE', #21316, 10.50000000000009600 ) ; +#54122 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 96.59999999999999400, 13.79444196196997700 ) ) ; +#54123 = CIRCLE ( 'NONE', #18360, 9.500000000000099500 ) ; +#54124 = VERTEX_POINT ( 'NONE', #30725 ) ; +#54125 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841334100, 80.16349705304836000, -28.30782889147497600 ) ) ; +#54126 = CARTESIAN_POINT ( 'NONE', ( -22.09548173606994900, 6.452565767159409700, -25.75764240579295000 ) ) ; +#54128 = VERTEX_POINT ( 'NONE', #5971 ) ; +#54127 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#54129 = PLANE ( 'NONE', #69453 ) ; +#54130 = ORIENTED_EDGE ( 'NONE', *, *, #41307, .F. ) ; +#54131 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54132 = ADVANCED_FACE ( 'NONE', ( #39604 ), #68804, .T. ) ; +#54133 = CIRCLE ( 'NONE', #32976, 10.50000000000009600 ) ; +#54134 = ORIENTED_EDGE ( 'NONE', *, *, #50195, .T. ) ; +#54135 = EDGE_CURVE ( 'NONE', #12313, #40037, #23086, .T. ) ; +#54136 = ORIENTED_EDGE ( 'NONE', *, *, #12292, .T. ) ; +#54137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54138 = ORIENTED_EDGE ( 'NONE', *, *, #57125, .T. ) ; +#54139 = EDGE_CURVE ( 'NONE', #33477, #35769, #47600, .T. ) ; +#54140 = ORIENTED_EDGE ( 'NONE', *, *, #13562, .T. ) ; +#54141 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567000, 51.46283204837339300, -28.48697406221667400 ) ) ; +#54142 = FACE_OUTER_BOUND ( 'NONE', #37054, .T. ) ; +#54143 = ADVANCED_FACE ( 'NONE', ( #21138 ), #66869, .F. ) ; +#54144 = FACE_OUTER_BOUND ( 'NONE', #2030, .T. ) ; +#54145 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 7.166666666666683800, -6.205558038030004800 ) ) ; +#54146 = ORIENTED_EDGE ( 'NONE', *, *, #8678, .T. ) ; +#54147 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54148 = EDGE_CURVE ( 'NONE', #44206, #71731, #33163, .T. ) ; +#54149 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34394, #46592, #53147, #15892 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716406200, 0.004080294652942919300 ), + .UNSPECIFIED. ) ; +#54150 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54151 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 47.33333333333333600, -8.133761268305512700 ) ) ; +#54152 = EDGE_CURVE ( 'NONE', #71559, #23355, #18705, .T. ) ; +#54153 = ORIENTED_EDGE ( 'NONE', *, *, #31888, .T. ) ; +#54154 = VECTOR ( 'NONE', #67818, 1000.000000000000000 ) ; +#54155 = AXIS2_PLACEMENT_3D ( 'NONE', #64888, #71108, #21355 ) ; +#54157 = ORIENTED_EDGE ( 'NONE', *, *, #31011, .T. ) ; +#54156 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54158 = ADVANCED_FACE ( 'NONE', ( #37629 ), #56253, .T. ) ; +#54159 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27107, #70592, #45812, #8564 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001137779926879106200, 0.0003808516268249048900 ), + .UNSPECIFIED. ) ; +#54160 = VERTEX_POINT ( 'NONE', #43987 ) ; +#54161 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#54162 = CIRCLE ( 'NONE', #65780, 9.500000000000099500 ) ; +#54163 = CARTESIAN_POINT ( 'NONE', ( -17.07349692871593700, 71.37839075872575700, -28.29547734244345100 ) ) ; +#54164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51394, #57697, #76449, #39177 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697193994700E-007, 0.0008724363063898948800 ), + .UNSPECIFIED. ) ; +#54166 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.73796787468680200, -28.38801640354855500 ) ) ; +#54165 = FACE_OUTER_BOUND ( 'NONE', #33551, .T. ) ; +#54167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54168 = AXIS2_PLACEMENT_3D ( 'NONE', #25056, #68571, #31326 ) ; +#54169 = EDGE_CURVE ( 'NONE', #3390, #73316, #4229, .T. ) ; +#54170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54172 = ORIENTED_EDGE ( 'NONE', *, *, #71555, .T. ) ; +#54171 = EDGE_CURVE ( 'NONE', #62615, #55722, #70557, .T. ) ; +#54173 = EDGE_CURVE ( 'NONE', #11856, #36928, #56094, .T. ) ; +#54174 = ADVANCED_FACE ( 'NONE', ( #35725 ), #17225, .T. ) ; +#54175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54176 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66827, #4783, #11068, #54572 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850278700, 0.0007596411030281088600 ), + .UNSPECIFIED. ) ; +#54177 = AXIS2_PLACEMENT_3D ( 'NONE', #7411, #50908, #13722 ) ; +#54178 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715110000, 18.27966528189927700, -28.30868034705286000 ) ) ; +#54179 = CARTESIAN_POINT ( 'NONE', ( 11.80141306497079000, 94.72249899919779600, -28.20555803803047500 ) ) ; +#54180 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54181 = AXIS2_PLACEMENT_3D ( 'NONE', #14547, #39270, #51753 ) ; +#54182 = CIRCLE ( 'NONE', #45849, 9.500000000000099500 ) ; +#54183 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#54184 = VERTEX_POINT ( 'NONE', #63073 ) ; +#54185 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54186 = CONICAL_SURFACE ( 'NONE', #35277, 10.50000000000009600, 0.7853981633974482800 ) ; +#54187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54188 = AXIS2_PLACEMENT_3D ( 'NONE', #79522, #42216, #4978 ) ; +#54189 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54190 = EDGE_CURVE ( 'NONE', #39470, #51411, #41628, .T. ) ; +#54192 = ORIENTED_EDGE ( 'NONE', *, *, #48962, .F. ) ; +#54191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54193 = CONICAL_SURFACE ( 'NONE', #77482, 10.50000000000009600, 0.7853981633974500600 ) ; +#54194 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000000000, 88.62623792124939800, -28.70555803802997700 ) ) ; +#54195 = AXIS2_PLACEMENT_3D ( 'NONE', #60805, #48237, #47972 ) ; +#54196 = AXIS2_PLACEMENT_3D ( 'NONE', #48950, #11743, #17986 ) ; +#54197 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 81.25732391202397800, -28.20555803802997700 ) ) ; +#54198 = ORIENTED_EDGE ( 'NONE', *, *, #49614, .T. ) ; +#54199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54200 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819091600, 61.65075715145258800, -28.20555803803014100 ) ) ; +#54201 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851406800, 25.50238095238082900, -28.70555803802994200 ) ) ; +#54202 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 36.94142842854307000, -28.20555803802995200 ) ) ; +#54203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54204 = CIRCLE ( 'NONE', #59317, 10.00000000000009200 ) ; +#54205 = FACE_OUTER_BOUND ( 'NONE', #31337, .T. ) ; +#54206 = EDGE_LOOP ( 'NONE', ( #32078, #59633, #57085 ) ) ; +#54207 = CARTESIAN_POINT ( 'NONE', ( -0.8996655518395214600, 60.79999999999999000, -28.20555803802988500 ) ) ; +#54208 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 80.16054007504433800, -28.34042301926905700 ) ) ; +#54209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54210 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 70.16749699759769500, -28.20555803802997700 ) ) ; +#54211 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70329, #1778, #7766, #33073 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562351500, 0.001319946300100755700 ), + .UNSPECIFIED. ) ; +#54212 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730213100, 90.01262610361159500, -28.29936525552471900 ) ) ; +#54213 = ORIENTED_EDGE ( 'NONE', *, *, #39856, .T. ) ; +#54214 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528154400, 9.968680884981225200, -28.51286550264508400 ) ) ; +#54215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54216 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 65.46616414991841300, -28.37247596307076200 ) ) ; +#54217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65989, #22458, #16482, #60006 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736094835600E-007, 0.0006649316450229624600 ), + .UNSPECIFIED. ) ; +#54218 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 49.42298334620782900, -28.20555803802996700 ) ) ; +#54219 = FACE_OUTER_BOUND ( 'NONE', #61147, .T. ) ; +#54220 = AXIS2_PLACEMENT_3D ( 'NONE', #7253, #50757, #13554 ) ; +#54221 = ORIENTED_EDGE ( 'NONE', *, *, #37085, .T. ) ; +#54222 = ORIENTED_EDGE ( 'NONE', *, *, #53502, .T. ) ; +#54223 = VERTEX_POINT ( 'NONE', #75557 ) ; +#54224 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ; +#54225 = FACE_OUTER_BOUND ( 'NONE', #56178, .T. ) ; +#54226 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 53.33333333333334300, -5.205558038030008400 ) ) ; +#54227 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#54228 = AXIS2_PLACEMENT_3D ( 'NONE', #60552, #66794, #54263 ) ; +#54229 = ORIENTED_EDGE ( 'NONE', *, *, #72024, .T. ) ; +#54230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54231 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54232 = ADVANCED_FACE ( 'NONE', ( #2594 ), #64936, .T. ) ; +#54233 = EDGE_CURVE ( 'NONE', #59892, #12986, #27200, .T. ) ; +#54234 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 57.94142842854297700, -28.20555803802997700 ) ) ; +#54235 = CONICAL_SURFACE ( 'NONE', #36678, 10.00000000000009400, 0.7853981633974447300 ) ; +#54236 = ORIENTED_EDGE ( 'NONE', *, *, #1510, .F. ) ; +#54237 = AXIS2_PLACEMENT_3D ( 'NONE', #55193, #61490, #5437 ) ; +#54238 = ORIENTED_EDGE ( 'NONE', *, *, #73126, .F. ) ; +#54239 = CARTESIAN_POINT ( 'NONE', ( 4.745342735184574500, 31.00380841767820800, -28.64142799534456400 ) ) ; +#54240 = ORIENTED_EDGE ( 'NONE', *, *, #47435, .T. ) ; +#54241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54242 = CIRCLE ( 'NONE', #80341, 10.00000000000009200 ) ; +#54243 = ADVANCED_FACE ( 'NONE', ( #647 ), #31831, .F. ) ; +#54244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54246 = ORIENTED_EDGE ( 'NONE', *, *, #54412, .T. ) ; +#54245 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#54247 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54248 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159813300, 19.40190441413977900, -28.70555803803001600 ) ) ; +#54249 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 24.66666666666667900, 8.320721403598824400 ) ) ; +#54250 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873542000, 37.42044679784050500, -28.64059091698903400 ) ) ; +#54251 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 20.61077422949657000, -28.37255355648632400 ) ) ; +#54252 = EDGE_CURVE ( 'NONE', #38435, #80010, #48330, .T. ) ; +#54253 = CONICAL_SURFACE ( 'NONE', #63060, 10.50000000000009600, 0.7853981633974500600 ) ; +#54254 = ORIENTED_EDGE ( 'NONE', *, *, #1824, .T. ) ; +#54255 = ADVANCED_FACE ( 'NONE', ( #19165 ), #62968, .T. ) ; +#54256 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78248, #40981, #16237, #59759 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203477792732600E-007, 0.0008990233139250863300 ), + .UNSPECIFIED. ) ; +#54257 = EDGE_CURVE ( 'NONE', #51136, #77911, #79516, .T. ) ; +#54258 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-015, 37.62623792124938400, -28.70555803802995200 ) ) ; +#54259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54260 = CARTESIAN_POINT ( 'NONE', ( 3.242975574465655000, 80.16517473503374400, -28.29551658696716000 ) ) ; +#54261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #872, #75420, #50632, #13426 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.777562605088864000E-017, 0.001179148174663266400 ), + .UNSPECIFIED. ) ; +#54262 = FACE_OUTER_BOUND ( 'NONE', #15546, .T. ) ; +#54263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54264 = EDGE_CURVE ( 'NONE', #55084, #61282, #12741, .T. ) ; +#54265 = ORIENTED_EDGE ( 'NONE', *, *, #68534, .F. ) ; +#54266 = ADVANCED_FACE ( 'NONE', ( #33763 ), #13334, .F. ) ; +#54267 = CARTESIAN_POINT ( 'NONE', ( -3.976832725519373400, 49.58088969930749100, -28.30223898143228600 ) ) ; +#54268 = CARTESIAN_POINT ( 'NONE', ( -22.16229725273922900, 101.1198277603886200, -21.80036009113971200 ) ) ; +#54269 = EDGE_CURVE ( 'NONE', #23819, #26791, #29909, .T. ) ; +#54270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47918, #4429, #10704, #54197 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362992000, 0.0007987676590766470200 ), + .UNSPECIFIED. ) ; +#54271 = AXIS2_PLACEMENT_3D ( 'NONE', #35060, #78577, #41272 ) ; +#54272 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54273 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#54274 = CIRCLE ( 'NONE', #18217, 10.00000000000009200 ) ; +#54275 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 59.16666666666667100, -6.205558038030004800 ) ) ; +#54276 = ORIENTED_EDGE ( 'NONE', *, *, #10914, .F. ) ; +#54277 = EDGE_CURVE ( 'NONE', #69802, #56250, #79052, .T. ) ; +#54278 = CARTESIAN_POINT ( 'NONE', ( 19.55260919700867500, 0.8947816059825741700, -22.88564861210925000 ) ) ; +#54279 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54280 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54281 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701700, 42.40456253568395100, -28.61277292027075700 ) ) ; +#54282 = VERTEX_POINT ( 'NONE', #8077 ) ; +#54283 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54284 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#54285 = CARTESIAN_POINT ( 'NONE', ( 8.939071942967052200, 10.00000000000003700, -28.70555803802998100 ) ) ; +#54286 = AXIS2_PLACEMENT_3D ( 'NONE', #32418, #1117, #69672 ) ; +#54287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54288 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10565, #72856, #79113, #41819 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646353100, 0.0009605145132142234900 ), + .UNSPECIFIED. ) ; +#54289 = EDGE_CURVE ( 'NONE', #27733, #17037, #52222, .T. ) ; +#54290 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54291 = EDGE_CURVE ( 'NONE', #35366, #45518, #46355, .T. ) ; +#54292 = EDGE_CURVE ( 'NONE', #31625, #1060, #54204, .T. ) ; +#54293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54294 = CIRCLE ( 'NONE', #42592, 10.00000000000009200 ) ; +#54295 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54296 = CONICAL_SURFACE ( 'NONE', #39662, 10.00000000000009200, 0.7853981633974447300 ) ; +#54297 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#54298 = ORIENTED_EDGE ( 'NONE', *, *, #55221, .F. ) ; +#54299 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 43.65857157145701700, -28.20555803802997700 ) ) ; +#54300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54301 = EDGE_LOOP ( 'NONE', ( #55623, #10408, #38129, #8, #67814, #33072, #42096, #31594 ) ) ; +#54302 = AXIS2_PLACEMENT_3D ( 'NONE', #21188, #64721, #27453 ) ; +#54303 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 81.43945992495515900, -28.34042301926901400 ) ) ; +#54304 = ORIENTED_EDGE ( 'NONE', *, *, #76208, .F. ) ; +#54305 = ORIENTED_EDGE ( 'NONE', *, *, #14378, .T. ) ; +#54306 = VERTEX_POINT ( 'NONE', #14633 ) ; +#54307 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 22.67681279774500100, -28.70555803802995200 ) ) ; +#54308 = ORIENTED_EDGE ( 'NONE', *, *, #43293, .F. ) ; +#54309 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856404700, 53.67681279774490800, -28.70555803802997700 ) ) ; +#54310 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148628700, 15.00238095238077700, -28.70555803802992800 ) ) ; +#54311 = EDGE_CURVE ( 'NONE', #10918, #69152, #15272, .T. ) ; +#54312 = AXIS2_PLACEMENT_3D ( 'NONE', #18797, #25057, #12295 ) ; +#54313 = AXIS2_PLACEMENT_3D ( 'NONE', #44978, #7739, #51226 ) ; +#54314 = ORIENTED_EDGE ( 'NONE', *, *, #47708, .T. ) ; +#54315 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 60.79999999999999000, -28.20555803802997700 ) ) ; +#54316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54317 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49188, #48923, #60948, #55464 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405667917298400E-007, 0.0007670610367940975900 ), + .UNSPECIFIED. ) ; +#54318 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#54319 = FACE_OUTER_BOUND ( 'NONE', #802, .T. ) ; +#54320 = ORIENTED_EDGE ( 'NONE', *, *, #40212, .F. ) ; +#54321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54322 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#54323 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 65.50000000000000000, 6.847000845227641200 ) ) ; +#54324 = ORIENTED_EDGE ( 'NONE', *, *, #33896, .F. ) ; +#54325 = CIRCLE ( 'NONE', #72497, 10.00000000000009400 ) ; +#54326 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 30.66666666666668200, -3.705558038030004400 ) ) ; +#54327 = AXIS2_PLACEMENT_3D ( 'NONE', #31878, #75387, #38094 ) ; +#54328 = VERTEX_POINT ( 'NONE', #52119 ) ; +#54329 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192778600, 66.79999999999982700, -28.70555803803030800 ) ) ; +#54330 = AXIS2_PLACEMENT_3D ( 'NONE', #6198, #49673, #12462 ) ; +#54331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#54332 = CIRCLE ( 'NONE', #3577, 10.50000000000009600 ) ; +#54333 = VERTEX_POINT ( 'NONE', #64690 ) ; +#54334 = CARTESIAN_POINT ( 'NONE', ( -9.086399070139918900, 44.45000000000002400, -2.128763418436760500 ) ) ; +#54335 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432791300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#54336 = EDGE_CURVE ( 'NONE', #52508, #24651, #64605, .T. ) ; +#54337 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 33.00000000000000000, -1.205558038030002800 ) ) ; +#54338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54339 = AXIS2_PLACEMENT_3D ( 'NONE', #27292, #70771, #33512 ) ; +#54340 = ORIENTED_EDGE ( 'NONE', *, *, #60525, .T. ) ; +#54341 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54342 = CARTESIAN_POINT ( 'NONE', ( -11.53374414036882600, 91.59999999999999400, -28.70555803802999500 ) ) ; +#54343 = ORIENTED_EDGE ( 'NONE', *, *, #74547, .T. ) ; +#54344 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466633200, 50.33106028708534300, -28.57333386111659500 ) ) ; +#54345 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.23796787468682400, -28.38801640354855100 ) ) ; +#54346 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349247300, 39.70543520232828200, -28.70555803802995200 ) ) ; +#54347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54348 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54349 = CARTESIAN_POINT ( 'NONE', ( 22.84759325550903200, 6.076203786849545100, -24.90359197865961600 ) ) ; +#54350 = AXIS2_PLACEMENT_3D ( 'NONE', #73337, #36075, #79589 ) ; +#54351 = CONICAL_SURFACE ( 'NONE', #78648, 10.50000000000009600, 0.7853981633974500600 ) ; +#54352 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372581200, 67.93535825203869600, -28.53896444442235800 ) ) ; +#54353 = CARTESIAN_POINT ( 'NONE', ( -10.40068702172304400, 92.17541673345678500, -28.69290071860184800 ) ) ; +#54354 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408278400, 39.38586625357847000, -28.27331438134756100 ) ) ; +#54355 = ORIENTED_EDGE ( 'NONE', *, *, #35610, .F. ) ; +#54356 = ORIENTED_EDGE ( 'NONE', *, *, #65418, .F. ) ; +#54357 = CARTESIAN_POINT ( 'NONE', ( 19.79697538293415000, 101.1939728448393900, -21.52918090194666700 ) ) ; +#54358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54360 = ADVANCED_FACE ( 'NONE', ( #77549 ), #59043, .F. ) ; +#54361 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54363 = ADVANCED_FACE ( 'NONE', ( #61031 ), #25981, .F. ) ; +#54364 = FACE_OUTER_BOUND ( 'NONE', #31410, .T. ) ; +#54365 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54366 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#54367 = ORIENTED_EDGE ( 'NONE', *, *, #7900, .T. ) ; +#54368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45630, #2130, #58178, #20945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446040077800E-007, 0.0002745498510224187300 ), + .UNSPECIFIED. ) ; +#54369 = CONICAL_SURFACE ( 'NONE', #40131, 10.00000000000009200, 0.7853981633974447300 ) ; +#54370 = ORIENTED_EDGE ( 'NONE', *, *, #46613, .T. ) ; +#54371 = ORIENTED_EDGE ( 'NONE', *, *, #11052, .T. ) ; +#54372 = EDGE_CURVE ( 'NONE', #3408, #11162, #50074, .T. ) ; +#54373 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 36.50000000000001400, 4.650848422521016300 ) ) ; +#54374 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54375 = ORIENTED_EDGE ( 'NONE', *, *, #19516, .T. ) ; +#54376 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100951700, 49.12363993080123900, -28.38670679782147800 ) ) ; +#54377 = CONICAL_SURFACE ( 'NONE', #58001, 10.50000000000009600, 0.7853981633974500600 ) ; +#54378 = EDGE_CURVE ( 'NONE', #31625, #21820, #50270, .T. ) ; +#54379 = ORIENTED_EDGE ( 'NONE', *, *, #16292, .F. ) ; +#54380 = ORIENTED_EDGE ( 'NONE', *, *, #72647, .F. ) ; +#54381 = ORIENTED_EDGE ( 'NONE', *, *, #31489, .T. ) ; +#54382 = VERTEX_POINT ( 'NONE', #9135 ) ; +#54383 = VERTEX_POINT ( 'NONE', #21704 ) ; +#54384 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148836600, 25.50238095238052300, -28.70555803802994200 ) ) ; +#54386 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ; +#54385 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701300, 14.98096581827321200, -28.69431509262337300 ) ) ; +#54387 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#54388 = CARTESIAN_POINT ( 'NONE', ( -8.899432983923834000, 57.15000000000000600, -4.548250787723930000 ) ) ; +#54389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45153, #26469, #51409, #14203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367399377400, 0.0005556746457753992300 ), + .UNSPECIFIED. ) ; +#54390 = EDGE_CURVE ( 'NONE', #5664, #27548, #35669, .T. ) ; +#54391 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846307800, 60.79999999999999700, -28.55171188418377100 ) ) ; +#54392 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999961600, 83.89610994602590200, -28.37519436813230600 ) ) ; +#54393 = ORIENTED_EDGE ( 'NONE', *, *, #34216, .T. ) ; +#54394 = CIRCLE ( 'NONE', #79802, 10.50000000000009600 ) ; +#54395 = VERTEX_POINT ( 'NONE', #64968 ) ; +#54396 = EDGE_CURVE ( 'NONE', #7754, #41614, #27946, .T. ) ; +#54397 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54399 = EDGE_CURVE ( 'NONE', #77640, #17105, #44396, .T. ) ; +#54398 = ORIENTED_EDGE ( 'NONE', *, *, #69629, .F. ) ; +#54400 = EDGE_LOOP ( 'NONE', ( #17553, #43487, #64500, #65108, #46477 ) ) ; +#54401 = ORIENTED_EDGE ( 'NONE', *, *, #21542, .T. ) ; +#54402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63675, #20151, #32644, #76151 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001738906318342033600, 0.001775972851781811500 ), + .UNSPECIFIED. ) ; +#54403 = ORIENTED_EDGE ( 'NONE', *, *, #21879, .F. ) ; +#54404 = CARTESIAN_POINT ( 'NONE', ( -24.30526887858583500, 5.347421603165573200, -22.37251683726934100 ) ) ; +#54405 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54406 = FACE_OUTER_BOUND ( 'NONE', #36836, .T. ) ; +#54407 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54408 = AXIS2_PLACEMENT_3D ( 'NONE', #54361, #66899, #29653 ) ; +#54409 = EDGE_CURVE ( 'NONE', #10564, #47841, #42491, .T. ) ; +#54410 = EDGE_CURVE ( 'NONE', #39939, #53623, #21213, .T. ) ; +#54411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79048, #29310, #10768, #17025 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249634900, 0.0007802304471363377500 ), + .UNSPECIFIED. ) ; +#54412 = EDGE_CURVE ( 'NONE', #11187, #55704, #6720, .T. ) ; +#54413 = CARTESIAN_POINT ( 'NONE', ( 2.233092656309821200, 55.80000000000001800, -28.70555803802997700 ) ) ; +#54414 = ORIENTED_EDGE ( 'NONE', *, *, #65400, .F. ) ; +#54415 = AXIS2_PLACEMENT_3D ( 'NONE', #30679, #36898, #67927 ) ; +#54416 = VECTOR ( 'NONE', #15416, 1000.000000000000000 ) ; +#54418 = ORIENTED_EDGE ( 'NONE', *, *, #25357, .F. ) ; +#54417 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459462900, 82.51973550835637600, -28.70555803803011200 ) ) ; +#54419 = ORIENTED_EDGE ( 'NONE', *, *, #17896, .F. ) ; +#54420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54421 = EDGE_LOOP ( 'NONE', ( #56818, #17457, #79671 ) ) ; +#54422 = AXIS2_PLACEMENT_3D ( 'NONE', #42881, #5636, #49116 ) ; +#54423 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 5.000000000000010700, 3.794441961969998300 ) ) ; +#54424 = AXIS2_PLACEMENT_3D ( 'NONE', #38127, #6879, #69158 ) ; +#54425 = AXIS2_PLACEMENT_3D ( 'NONE', #21363, #64899, #27618 ) ; +#54426 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 45.16666666666665000, 6.794441961969992500 ) ) ; +#54427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54428 = CIRCLE ( 'NONE', #6643, 10.50000000000009200 ) ; +#54429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54430 = CONICAL_SURFACE ( 'NONE', #31706, 10.50000000000009600, 0.7853981633974518300 ) ; +#54431 = ORIENTED_EDGE ( 'NONE', *, *, #8973, .F. ) ; +#54432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54433 = AXIS2_PLACEMENT_3D ( 'NONE', #36386, #79941, #42639 ) ; +#54434 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#54435 = VERTEX_POINT ( 'NONE', #65757 ) ; +#54436 = EDGE_CURVE ( 'NONE', #66453, #1950, #9396, .T. ) ; +#54437 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54438 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72535, #78795, #16749, #60298 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849853100, 0.0007596411030278620900 ), + .UNSPECIFIED. ) ; +#54439 = ADVANCED_FACE ( 'NONE', ( #11384 ), #71710, .F. ) ; +#54440 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811158900, 64.54539096019129800, -28.69802137271993600 ) ) ; +#54441 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#54442 = FACE_OUTER_BOUND ( 'NONE', #38850, .T. ) ; +#54444 = ORIENTED_EDGE ( 'NONE', *, *, #16829, .F. ) ; +#54443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54445 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54446 = CIRCLE ( 'NONE', #53122, 10.00000000000009400 ) ; +#54447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54448 = ORIENTED_EDGE ( 'NONE', *, *, #68816, .F. ) ; +#54449 = ORIENTED_EDGE ( 'NONE', *, *, #54763, .T. ) ; +#54450 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999984100, -28.20555803803014400 ) ) ; +#54451 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#54452 = EDGE_CURVE ( 'NONE', #26007, #59592, #73062, .T. ) ; +#54453 = CONICAL_SURFACE ( 'NONE', #70981, 10.00000000000009400, 0.7853981633974447300 ) ; +#54454 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 30.57757630314203800, -28.53861367218592100 ) ) ; +#54455 = EDGE_LOOP ( 'NONE', ( #1667, #27731, #30474, #13853 ) ) ; +#54456 = ORIENTED_EDGE ( 'NONE', *, *, #51042, .T. ) ; +#54457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54458 = CARTESIAN_POINT ( 'NONE', ( 17.06455573922525600, 71.50962196508452000, -28.29483400905928600 ) ) ; +#54459 = AXIS2_PLACEMENT_3D ( 'NONE', #42298, #79590, #48274 ) ; +#54460 = VERTEX_POINT ( 'NONE', #28794 ) ; +#54461 = ORIENTED_EDGE ( 'NONE', *, *, #79812, .F. ) ; +#54462 = ORIENTED_EDGE ( 'NONE', *, *, #876, .F. ) ; +#54463 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54464 = ORIENTED_EDGE ( 'NONE', *, *, #47702, .F. ) ; +#54465 = PLANE ( 'NONE', #38716 ) ; +#54466 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ; +#54467 = CARTESIAN_POINT ( 'NONE', ( 9.997971278275748800, 30.81091476818473800, -28.25432823872346000 ) ) ; +#54468 = ADVANCED_FACE ( 'NONE', ( #24024 ), #47461, .T. ) ; +#54469 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.68929190448939400, -28.20555803802997700 ) ) ; +#54470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54471 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385100800, 41.60677350908850500, -28.30799595738894000 ) ) ; +#54472 = ORIENTED_EDGE ( 'NONE', *, *, #73118, .F. ) ; +#54473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54474 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54475 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198450200, 90.69966441803909200, -28.70555803803014400 ) ) ; +#54476 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725302100, 24.54999999999999700, -28.20555803802994200 ) ) ; +#54477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54478 = CONICAL_SURFACE ( 'NONE', #51025, 10.00000000000009600, 0.7853981633974447300 ) ; +#54479 = AXIS2_PLACEMENT_3D ( 'NONE', #78798, #41500, #4235 ) ; +#54480 = VERTEX_POINT ( 'NONE', #3702 ) ; +#54481 = ORIENTED_EDGE ( 'NONE', *, *, #18060, .F. ) ; +#54482 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385314400, 49.49322649091134000, -28.30799595738871200 ) ) ; +#54483 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 80.34267608797570400, -28.20555803802997700 ) ) ; +#54484 = ORIENTED_EDGE ( 'NONE', *, *, #7781, .F. ) ; +#54485 = ORIENTED_EDGE ( 'NONE', *, *, #68213, .T. ) ; +#54486 = CARTESIAN_POINT ( 'NONE', ( 2.497924978448516200, 90.99854748491394200, -28.70555803802997700 ) ) ; +#54487 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 30.93250300240229200, -28.20555803802996700 ) ) ; +#54488 = CIRCLE ( 'NONE', #57202, 10.50000000000009600 ) ; +#54489 = PLANE ( 'NONE', #64863 ) ; +#54490 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823699600, 31.90456253568397200, -28.61277292027075700 ) ) ; +#54491 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Rear_Plate', ( #56500, #72827 ), #39433 ) ; +#54492 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 43.65857157145701700, -28.20555803802997700 ) ) ; +#54493 = ORIENTED_EDGE ( 'NONE', *, *, #69990, .F. ) ; +#54494 = AXIS2_PLACEMENT_3D ( 'NONE', #6183, #49648, #12446 ) ; +#54495 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.22294471194858200, -28.20555803802995200 ) ) ; +#54496 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54497 = ORIENTED_EDGE ( 'NONE', *, *, #66574, .F. ) ; +#54498 = ADVANCED_FACE ( 'NONE', ( #7434 ), #22069, .F. ) ; +#54499 = EDGE_CURVE ( 'NONE', #23277, #17425, #58581, .T. ) ; +#54500 = FACE_OUTER_BOUND ( 'NONE', #15991, .T. ) ; +#54501 = VERTEX_POINT ( 'NONE', #4245 ) ; +#54502 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656713800, 18.35339758437810100, -28.20555803802992800 ) ) ; +#54503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63966, #57681, #32922, #76429 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786059677000E-007, 0.0007677775503743747400 ), + .UNSPECIFIED. ) ; +#54504 = ORIENTED_EDGE ( 'NONE', *, *, #51995, .F. ) ; +#54505 = VERTEX_POINT ( 'NONE', #10257 ) ; +#54506 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 51.16666666666665700, 0.9380355014189834000 ) ) ; +#54507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54509 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260019800, 60.20034312068834500, -28.70555803803001600 ) ) ; +#54510 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 5.000000000000000000, -18.70555803803001300 ) ) ; +#54511 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#54512 = EDGE_CURVE ( 'NONE', #26388, #6941, #44079, .T. ) ; +#54514 = EDGE_CURVE ( 'NONE', #62090, #43891, #73657, .T. ) ; +#54513 = CIRCLE ( 'NONE', #1037, 10.50000000000009200 ) ; +#54515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54516 = ORIENTED_EDGE ( 'NONE', *, *, #60976, .T. ) ; +#54517 = ORIENTED_EDGE ( 'NONE', *, *, #70351, .F. ) ; +#54518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54519 = AXIS2_PLACEMENT_3D ( 'NONE', #8421, #51921, #14703 ) ; +#54520 = EDGE_CURVE ( 'NONE', #28268, #73055, #29710, .T. ) ; +#54521 = EDGE_CURVE ( 'NONE', #9178, #4270, #15198, .T. ) ; +#54522 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328247500, 59.66414768974043200, -28.38420446581291400 ) ) ; +#54523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54524 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25628, #31872, #7083, #50581 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782419900, 0.0004366687057301855300 ), + .UNSPECIFIED. ) ; +#54525 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#54526 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 79.28967419478900100, -28.59353418718932400 ) ) ; +#54527 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 22.50000000000000400, -9.258116921287651700 ) ) ; +#54528 = CIRCLE ( 'NONE', #69069, 10.00000000000009400 ) ; +#54530 = EDGE_LOOP ( 'NONE', ( #56273, #17877, #61396, #64079, #47796 ) ) ; +#54529 = EDGE_CURVE ( 'NONE', #27463, #10125, #38561, .T. ) ; +#54531 = ORIENTED_EDGE ( 'NONE', *, *, #36796, .F. ) ; +#54532 = AXIS2_PLACEMENT_3D ( 'NONE', #20244, #63778, #26520 ) ; +#54533 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 61.62753447840886900, -28.38801640354855800 ) ) ; +#54534 = FACE_OUTER_BOUND ( 'NONE', #31223, .T. ) ; +#54535 = EDGE_LOOP ( 'NONE', ( #75016, #53989, #78906 ) ) ; +#54536 = ORIENTED_EDGE ( 'NONE', *, *, #43289, .F. ) ; +#54537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54538 = ORIENTED_EDGE ( 'NONE', *, *, #13093, .F. ) ; +#54539 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54540 = ORIENTED_EDGE ( 'NONE', *, *, #60147, .T. ) ; +#54541 = AXIS2_PLACEMENT_3D ( 'NONE', #53909, #16667, #60200 ) ; +#54542 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#54543 = AXIS2_PLACEMENT_3D ( 'NONE', #12961, #56452, #19198 ) ; +#54544 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42748, #80032, #48979, #11773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183088900, 0.005168056621191878200 ), + .UNSPECIFIED. ) ; +#54545 = ADVANCED_FACE ( 'NONE', ( #75580 ), #36635, .F. ) ; +#54546 = VERTEX_POINT ( 'NONE', #67080 ) ; +#54547 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54548 = FACE_OUTER_BOUND ( 'NONE', #4442, .T. ) ; +#54549 = ORIENTED_EDGE ( 'NONE', *, *, #69688, .F. ) ; +#54550 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 57.00000000000001400, 3.794441961969998300 ) ) ; +#54551 = ORIENTED_EDGE ( 'NONE', *, *, #39870, .F. ) ; +#54552 = CARTESIAN_POINT ( 'NONE', ( 20.79878767428429500, 4.201212325716418200, -27.03915952075506000 ) ) ; +#54553 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548954100, 9.940690926013790100, -28.35186440610860700 ) ) ; +#54554 = ORIENTED_EDGE ( 'NONE', *, *, #9368, .T. ) ; +#54555 = VERTEX_POINT ( 'NONE', #48276 ) ; +#54556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54557 = ORIENTED_EDGE ( 'NONE', *, *, #60325, .F. ) ; +#54558 = ORIENTED_EDGE ( 'NONE', *, *, #17741, .T. ) ; +#54559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54561 = CONICAL_SURFACE ( 'NONE', #32652, 10.00000000000009600, 0.7853981633974482800 ) ; +#54562 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432775300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#54563 = ADVANCED_FACE ( 'NONE', ( #55134 ), #3541, .T. ) ; +#54564 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#54565 = AXIS2_PLACEMENT_3D ( 'NONE', #60144, #4091, #29178 ) ; +#54566 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274713600, 35.36787096422374100, -28.37244029424742200 ) ) ; +#54567 = ORIENTED_EDGE ( 'NONE', *, *, #75723, .T. ) ; +#54568 = EDGE_CURVE ( 'NONE', #26321, #40650, #723, .T. ) ; +#54569 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955900, 51.56248377813390200, -28.32723995587615900 ) ) ; +#54570 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 41.86172549728279800, -28.47230003642276900 ) ) ; +#54571 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 9.746602415621723000, -28.20555803803009500 ) ) ; +#54572 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431400, 49.42298334620763700, -28.20555803802997700 ) ) ; +#54573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54574 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54575 = CARTESIAN_POINT ( 'NONE', ( 15.16958695401596700, 12.69875723892622200, -28.70555803803001600 ) ) ; +#54576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54577 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54578 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#54579 = FACE_OUTER_BOUND ( 'NONE', #55303, .T. ) ; +#54581 = ORIENTED_EDGE ( 'NONE', *, *, #30246, .T. ) ; +#54580 = ADVANCED_FACE ( 'NONE', ( #40543 ), #51186, .T. ) ; +#54582 = EDGE_CURVE ( 'NONE', #36198, #23878, #67805, .T. ) ; +#54583 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54584 = AXIS2_PLACEMENT_3D ( 'NONE', #65528, #28276, #71769 ) ; +#54585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38108, #44339, #50616, #13416 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697630884800E-007, 0.0008724363063899925700 ), + .UNSPECIFIED. ) ; +#54586 = ORIENTED_EDGE ( 'NONE', *, *, #71563, .F. ) ; +#54587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54588 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 0.0000000000000000000, -1.205558038030003500 ) ) ; +#54589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54590 = CARTESIAN_POINT ( 'NONE', ( 4.002028721724263600, 30.81091476818473800, -28.25432823872346000 ) ) ; +#54591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54592 = ADVANCED_FACE ( 'NONE', ( #20120 ), #1587, .T. ) ; +#54593 = AXIS2_PLACEMENT_3D ( 'NONE', #41421, #22675, #10163 ) ; +#54594 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823694600, 10.90456253568403300, -28.61277292027076800 ) ) ; +#54595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54596 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 63.33333333333333600, -10.73183747965883100 ) ) ; +#54597 = VERTEX_POINT ( 'NONE', #61394 ) ; +#54598 = ORIENTED_EDGE ( 'NONE', *, *, #61903, .T. ) ; +#54599 = ORIENTED_EDGE ( 'NONE', *, *, #78114, .F. ) ; +#54600 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 28.50000000000001100, 2.454695999814380200 ) ) ; +#54601 = AXIS2_PLACEMENT_3D ( 'NONE', #22389, #78431, #28961 ) ; +#54602 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#54603 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736700200, 14.05000000000000200, -28.70555803802992800 ) ) ; +#54604 = PLANE ( 'NONE', #21457 ) ; +#54605 = FACE_OUTER_BOUND ( 'NONE', #5457, .T. ) ; +#54606 = ORIENTED_EDGE ( 'NONE', *, *, #60524, .F. ) ; +#54607 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805674900, 15.68572799237457500, -28.67630847257084500 ) ) ; +#54608 = ORIENTED_EDGE ( 'NONE', *, *, #63841, .F. ) ; +#54609 = CARTESIAN_POINT ( 'NONE', ( -6.887403939367473500, 44.44999999999998900, 3.652141190883154000 ) ) ; +#54610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54611 = ORIENTED_EDGE ( 'NONE', *, *, #9358, .F. ) ; +#54612 = CONICAL_SURFACE ( 'NONE', #51050, 10.00000000000009400, 0.7853981633974447300 ) ; +#54613 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 30.83333333333334300, -4.152999154772353500 ) ) ; +#54614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54615 = VERTEX_POINT ( 'NONE', #24109 ) ; +#54616 = VERTEX_POINT ( 'NONE', #5332 ) ; +#54617 = ORIENTED_EDGE ( 'NONE', *, *, #40302, .F. ) ; +#54618 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898058600, 70.38105266879260600, -28.33409528117009700 ) ) ; +#54619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54620 = ORIENTED_EDGE ( 'NONE', *, *, #43363, .T. ) ; +#54621 = FACE_OUTER_BOUND ( 'NONE', #75761, .T. ) ; +#54622 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#54623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54624 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281057300, 81.13768531620324600, -28.37082013777818200 ) ) ; +#54625 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20273, #39006, #8006, #51502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.496346469501784900E-005, 0.0007303749718167623700 ), + .UNSPECIFIED. ) ; +#54626 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 67.94142842854287800, -28.20555803803047800 ) ) ; +#54627 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492429500, 29.20543520232829600, -28.70555803802994200 ) ) ; +#54628 = CARTESIAN_POINT ( 'NONE', ( 20.26636846459229000, 7.366815960375550500, -27.20646305944610800 ) ) ; +#54629 = CONICAL_SURFACE ( 'NONE', #77043, 10.50000000000009600, 0.7853981633974500600 ) ; +#54630 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#54631 = ORIENTED_EDGE ( 'NONE', *, *, #50546, .F. ) ; +#54632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54633 = VERTEX_POINT ( 'NONE', #73889 ) ; +#54634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54635 = EDGE_CURVE ( 'NONE', #60491, #4991, #67067, .T. ) ; +#54636 = ORIENTED_EDGE ( 'NONE', *, *, #68374, .T. ) ; +#54637 = EDGE_LOOP ( 'NONE', ( #2624, #75475, #37187 ) ) ; +#54638 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54639 = CARTESIAN_POINT ( 'NONE', ( 18.84984637517495500, 99.29969089176863400, -25.10732355758754500 ) ) ; +#54640 = ORIENTED_EDGE ( 'NONE', *, *, #25087, .F. ) ; +#54641 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54642 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#54643 = CIRCLE ( 'NONE', #74846, 10.00000000000009400 ) ; +#54644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54645 = ADVANCED_FACE ( 'NONE', ( #18154 ), #49261, .F. ) ; +#54646 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855320000, 63.67681279774478800, -28.70555803802997700 ) ) ; +#54647 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54648 = EDGE_CURVE ( 'NONE', #75704, #57505, #65862, .T. ) ; +#54649 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#54650 = AXIS2_PLACEMENT_3D ( 'NONE', #31276, #43733, #68536 ) ; +#54651 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 34.33333333333334300, -5.205558038030008400 ) ) ; +#54652 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#54653 = FACE_OUTER_BOUND ( 'NONE', #47681, .T. ) ; +#54654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54655 = ORIENTED_EDGE ( 'NONE', *, *, #36703, .T. ) ; +#54656 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.93250300240229200, -28.20555803802996700 ) ) ; +#54657 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344316200, 28.42298334620755500, -28.20555803802994900 ) ) ; +#54658 = ADVANCED_FACE ( 'NONE', ( #34713 ), #80443, .F. ) ; +#54659 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#54660 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873537000, 16.42044679784047300, -28.64059091698903700 ) ) ; +#54661 = AXIS2_PLACEMENT_3D ( 'NONE', #29760, #73249, #35985 ) ; +#54662 = CARTESIAN_POINT ( 'NONE', ( -3.660672611417151900, 57.14999999999997000, -9.926410492097627300 ) ) ; +#54663 = EDGE_CURVE ( 'NONE', #7748, #6449, #52577, .T. ) ; +#54664 = EDGE_CURVE ( 'NONE', #65973, #2167, #38109, .T. ) ; +#54665 = AXIS2_PLACEMENT_3D ( 'NONE', #10588, #54089, #16842 ) ; +#54666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54667 = CARTESIAN_POINT ( 'NONE', ( -4.745342735184540800, 41.50380841767821500, -28.64142799534456400 ) ) ; +#54668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54669 = PLANE ( 'NONE', #6421 ) ; +#54670 = ADVANCED_FACE ( 'NONE', ( #53179 ), #47305, .F. ) ; +#54671 = VERTEX_POINT ( 'NONE', #12408 ) ; +#54672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54673 = AXIS2_PLACEMENT_3D ( 'NONE', #70112, #32860, #76379 ) ; +#54674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67815, #61570, #18042, #74082 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178127925600, 0.0006016798664344047300 ), + .UNSPECIFIED. ) ; +#54675 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#54676 = ORIENTED_EDGE ( 'NONE', *, *, #2206, .F. ) ; +#54677 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#54678 = EDGE_CURVE ( 'NONE', #28286, #23494, #63910, .T. ) ; +#54679 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185600, 30.96868088498122200, -28.51286550264512000 ) ) ; +#54680 = ADVANCED_FACE ( 'NONE', ( #57106 ), #78513, .F. ) ; +#54681 = CIRCLE ( 'NONE', #67399, 10.00000000000009200 ) ; +#54682 = ORIENTED_EDGE ( 'NONE', *, *, #77036, .T. ) ; +#54683 = EDGE_LOOP ( 'NONE', ( #21646, #56595, #13510 ) ) ; +#54684 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462415300, 60.20590598242367300, -28.39369363572366100 ) ) ; +#54685 = CONICAL_SURFACE ( 'NONE', #39028, 10.00000000000009200, 0.7853981633974447300 ) ; +#54686 = ORIENTED_EDGE ( 'NONE', *, *, #52965, .F. ) ; +#54687 = ORIENTED_EDGE ( 'NONE', *, *, #16779, .F. ) ; +#54688 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54689 = ORIENTED_EDGE ( 'NONE', *, *, #28631, .T. ) ; +#54690 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 2.833333333333339700, -6.205558038030004800 ) ) ; +#54691 = VERTEX_POINT ( 'NONE', #129 ) ; +#54692 = CONICAL_SURFACE ( 'NONE', #13486, 10.00000000000009200, 0.7853981633974447300 ) ; +#54693 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995400, 10.68315603019280900, -28.70555803802998100 ) ) ; +#54694 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#54695 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 43.00000000000000700, -9.205558038030005700 ) ) ; +#54696 = EDGE_LOOP ( 'NONE', ( #77872, #17704, #28960, #14981 ) ) ; +#54697 = AXIS2_PLACEMENT_3D ( 'NONE', #62239, #49668, #24958 ) ; +#54698 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54699 = CIRCLE ( 'NONE', #13451, 10.00000000000009400 ) ; +#54700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54701 = ORIENTED_EDGE ( 'NONE', *, *, #77994, .F. ) ; +#54702 = ORIENTED_EDGE ( 'NONE', *, *, #13581, .T. ) ; +#54703 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 8.166666666666689200, 6.794441961969992500 ) ) ; +#54704 = ORIENTED_EDGE ( 'NONE', *, *, #26699, .F. ) ; +#54705 = FACE_OUTER_BOUND ( 'NONE', #47308, .T. ) ; +#54706 = ORIENTED_EDGE ( 'NONE', *, *, #5870, .F. ) ; +#54707 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244500, 30.39456479767167000, -28.70555803802995200 ) ) ; +#54708 = CIRCLE ( 'NONE', #41944, 9.500000000000097700 ) ; +#54709 = AXIS2_PLACEMENT_3D ( 'NONE', #76172, #38884, #1641 ) ; +#54710 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223634200, 89.83407839971528100, -28.37510699173776300 ) ) ; +#54711 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 32.92856308690591000, -28.36981695106779400 ) ) ; +#54712 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6610, #50093, #68894, #31649 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736038553500E-007, 0.0006649316450227270800 ), + .UNSPECIFIED. ) ; +#54713 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#54714 = EDGE_CURVE ( 'NONE', #18937, #4729, #23705, .T. ) ; +#54715 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#54716 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182100, 28.63131911501876900, -28.51286550264508100 ) ) ; +#54717 = AXIS2_PLACEMENT_3D ( 'NONE', #52562, #15335, #58836 ) ; +#54718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54719 = CIRCLE ( 'NONE', #45014, 10.00000000000009200 ) ; +#54720 = EDGE_LOOP ( 'NONE', ( #42987, #37808, #9952, #6784, #48159 ) ) ; +#54721 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52848, #28156, #34375, #77890 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962238924300, 0.0005195704752302481800 ), + .UNSPECIFIED. ) ; +#54722 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#54723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54725 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24448, #67954, #5952, #49414 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782978300, 0.0004366687057299898800 ), + .UNSPECIFIED. ) ; +#54726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54727 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54728 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944358200, 41.79955846777004800, -28.38339015421975700 ) ) ; +#54729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54730 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042233400, 17.00972971738951900, -28.70555803803014800 ) ) ; +#54731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54732 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823694600, 10.90456253568403300, -28.61277292027076800 ) ) ; +#54733 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73883, #30372, #18102, #61642 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696555967100E-007, 0.0008724363063898914100 ), + .UNSPECIFIED. ) ; +#54734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54735 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54736 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54737 = EDGE_CURVE ( 'NONE', #58440, #59962, #14251, .T. ) ; +#54738 = EDGE_CURVE ( 'NONE', #78744, #26410, #9189, .T. ) ; +#54739 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54740 = VERTEX_POINT ( 'NONE', #43627 ) ; +#54741 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310704100, 80.10230989102886700, -28.61774594594300300 ) ) ; +#54742 = EDGE_LOOP ( 'NONE', ( #14437, #43526, #33655, #54549 ) ) ; +#54743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54745 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 33.17681279774500100, -28.70555803802996700 ) ) ; +#54746 = EDGE_CURVE ( 'NONE', #69375, #5448, #75521, .T. ) ; +#54747 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 69.94924284854687400, -28.20555803802997700 ) ) ; +#54748 = EDGE_CURVE ( 'NONE', #46914, #25158, #61093, .T. ) ; +#54749 = CIRCLE ( 'NONE', #12134, 9.500000000000097700 ) ; +#54750 = VERTEX_POINT ( 'NONE', #75204 ) ; +#54751 = AXIS2_PLACEMENT_3D ( 'NONE', #26217, #32440, #1149 ) ; +#54752 = FACE_OUTER_BOUND ( 'NONE', #4806, .T. ) ; +#54753 = EDGE_LOOP ( 'NONE', ( #74763, #31140, #40539, #78053 ) ) ; +#54754 = ORIENTED_EDGE ( 'NONE', *, *, #5789, .T. ) ; +#54755 = CIRCLE ( 'NONE', #76742, 10.00000000000009400 ) ; +#54756 = ORIENTED_EDGE ( 'NONE', *, *, #43206, .F. ) ; +#54757 = ORIENTED_EDGE ( 'NONE', *, *, #65868, .F. ) ; +#54758 = ADVANCED_FACE ( 'NONE', ( #69731 ), #28904, .T. ) ; +#54759 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 49.00000000000000700, -1.205558038030005300 ) ) ; +#54760 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 41.24660241562189400, -28.20555803802996700 ) ) ; +#54761 = AXIS2_PLACEMENT_3D ( 'NONE', #47109, #9880, #53397 ) ; +#54762 = CIRCLE ( 'NONE', #22282, 10.00000000000009200 ) ; +#54763 = EDGE_CURVE ( 'NONE', #42777, #9881, #45346, .T. ) ; +#54764 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70665, #45341, #39664, #2380 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641854087974100E-007, 0.0008759659331882802600 ), + .UNSPECIFIED. ) ; +#54765 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#54766 = EDGE_CURVE ( 'NONE', #54112, #36426, #46574, .T. ) ; +#54767 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54768 = EDGE_CURVE ( 'NONE', #56243, #25886, #32163, .T. ) ; +#54769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54770 = ADVANCED_FACE ( 'NONE', ( #16213 ), #60007, .T. ) ; +#54771 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54772 = VERTEX_POINT ( 'NONE', #1200 ) ; +#54773 = CONICAL_SURFACE ( 'NONE', #78008, 10.00000000000009200, 0.7853981633974447300 ) ; +#54774 = AXIS2_PLACEMENT_3D ( 'NONE', #61333, #17792, #48757 ) ; +#54775 = ORIENTED_EDGE ( 'NONE', *, *, #48594, .F. ) ; +#54776 = ORIENTED_EDGE ( 'NONE', *, *, #50308, .F. ) ; +#54777 = VERTEX_POINT ( 'NONE', #50948 ) ; +#54778 = FACE_OUTER_BOUND ( 'NONE', #60388, .T. ) ; +#54779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54780 = EDGE_LOOP ( 'NONE', ( #54398, #75624, #80554, #52931 ) ) ; +#54781 = EDGE_CURVE ( 'NONE', #60899, #2539, #76512, .T. ) ; +#54782 = CONICAL_SURFACE ( 'NONE', #21604, 10.00000000000009200, 0.7853981633974447300 ) ; +#54783 = AXIS2_PLACEMENT_3D ( 'NONE', #18421, #49384, #55664 ) ; +#54784 = AXIS2_PLACEMENT_3D ( 'NONE', #46911, #59470, #77956 ) ; +#54785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54786 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54787 = PLANE ( 'NONE', #12118 ) ; +#54788 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54789 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#54790 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 20.33333333333334300, 4.294441961970000500 ) ) ; +#54791 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#54792 = EDGE_LOOP ( 'NONE', ( #40657, #78480, #62299, #72344 ) ) ; +#54793 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#54794 = CONICAL_SURFACE ( 'NONE', #58056, 10.50000000000009600, 0.7853981633974500600 ) ; +#54795 = ORIENTED_EDGE ( 'NONE', *, *, #78752, .F. ) ; +#54796 = CIRCLE ( 'NONE', #79005, 10.50000000000009600 ) ; +#54797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54798 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54800 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 101.5999999999999900, 16.29444196196998700 ) ) ; +#54801 = AXIS2_PLACEMENT_3D ( 'NONE', #24380, #30650, #18117 ) ; +#54802 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109273200, 28.97143078992715800, -28.37063977681166400 ) ) ; +#54803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54804 = AXIS2_PLACEMENT_3D ( 'NONE', #41603, #4341, #47837 ) ; +#54805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54806 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 54.83333333333334300, -6.205558038030004800 ) ) ; +#54807 = CARTESIAN_POINT ( 'NONE', ( 18.37441212949750700, 8.312793935250534000, -28.19902840602414400 ) ) ; +#54808 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 80.07141756547892400, -28.70555803802997700 ) ) ; +#54809 = EDGE_CURVE ( 'NONE', #60180, #14507, #61961, .T. ) ; +#54810 = PLANE ( 'NONE', #48002 ) ; +#54811 = AXIS2_PLACEMENT_3D ( 'NONE', #5391, #55412, #18161 ) ; +#54812 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 71.46283204837337200, -28.48697406221667400 ) ) ; +#54813 = EDGE_LOOP ( 'NONE', ( #44470, #1229, #66124 ) ) ; +#54814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54815 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54816 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#54817 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54818 = AXIS2_PLACEMENT_3D ( 'NONE', #45477, #8233, #51733 ) ; +#54819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54820 = ORIENTED_EDGE ( 'NONE', *, *, #80739, .F. ) ; +#54821 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783880200, 20.43250300240229200, -28.23966044827352900 ) ) ; +#54822 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404400, 17.92298334620739200, -28.20555803802993500 ) ) ; +#54823 = ORIENTED_EDGE ( 'NONE', *, *, #16991, .F. ) ; +#54824 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454054600, 69.08026449164295000, -28.70555803803030800 ) ) ; +#54825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26359, #1290, #76087, #38801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571436600, 0.0008043487657975322400 ), + .UNSPECIFIED. ) ; +#54826 = CIRCLE ( 'NONE', #18317, 10.50000000000009800 ) ; +#54827 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#54828 = ORIENTED_EDGE ( 'NONE', *, *, #47691, .T. ) ; +#54829 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544437600, 89.72166103827331100, -28.53892303408224200 ) ) ; +#54830 = CONICAL_SURFACE ( 'NONE', #69568, 10.00000000000009400, 0.7853981633974447300 ) ; +#54831 = AXIS2_PLACEMENT_3D ( 'NONE', #19908, #50864, #63433 ) ; +#54832 = ORIENTED_EDGE ( 'NONE', *, *, #39035, .F. ) ; +#54833 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719845800, 90.69966441803875100, -28.70555803802997700 ) ) ; +#54834 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#54835 = FACE_OUTER_BOUND ( 'NONE', #8607, .T. ) ; +#54836 = CARTESIAN_POINT ( 'NONE', ( -3.031785615621593900, 81.31767869357335600, -28.25052235028431400 ) ) ; +#54838 = VERTEX_POINT ( 'NONE', #76005 ) ; +#54837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54839 = ORIENTED_EDGE ( 'NONE', *, *, #779, .F. ) ; +#54840 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807174400, 54.79999999999985500, -28.70555803803014400 ) ) ; +#54841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54842 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54843 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.65857157145700300, -28.20555803802997700 ) ) ; +#54844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10880, #29417, #17132, #60662 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471843510418600E-007, 0.0002673661861287511900 ), + .UNSPECIFIED. ) ; +#54845 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761900, 81.43945992495534400, -28.34042301926881500 ) ) ; +#54846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54847 = ADVANCED_FACE ( 'NONE', ( #12324 ), #74600, .T. ) ; +#54848 = CIRCLE ( 'NONE', #75869, 10.50000000000009600 ) ; +#54849 = ORIENTED_EDGE ( 'NONE', *, *, #78726, .F. ) ; +#54850 = CONICAL_SURFACE ( 'NONE', #70127, 10.50000000000009900, 0.7853981633974518300 ) ; +#54851 = EDGE_CURVE ( 'NONE', #40106, #24204, #10363, .T. ) ; +#54852 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#54853 = VERTEX_POINT ( 'NONE', #63789 ) ; +#54854 = CARTESIAN_POINT ( 'NONE', ( 14.83757230220721900, 8.874221649654817400, -28.64240249045230900 ) ) ; +#54855 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#54856 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 61.16666666666668600, 9.794441961969994300 ) ) ; +#54859 = EDGE_CURVE ( 'NONE', #74506, #56941, #32737, .T. ) ; +#54858 = EDGE_LOOP ( 'NONE', ( #18473, #66122, #55323, #23504, #32658 ) ) ; +#54857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2358, #14903, #33661, #77180, #39915, #2625, #46134, #8876 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001335052463302535600, 0.002002578694953801200, 0.002670104926605066500 ), + .UNSPECIFIED. ) ; +#54860 = ORIENTED_EDGE ( 'NONE', *, *, #20215, .T. ) ; +#54861 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54862 = ORIENTED_EDGE ( 'NONE', *, *, #12820, .T. ) ; +#54863 = ADVANCED_FACE ( 'NONE', ( #5518 ), #8360, .F. ) ; +#54864 = FACE_OUTER_BOUND ( 'NONE', #25104, .T. ) ; +#54865 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 26.33333333333334300, -5.535685056952199400 ) ) ; +#54866 = EDGE_CURVE ( 'NONE', #35406, #26239, #24946, .T. ) ; +#54867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8196, #1954, #51433, #51707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964876100, 0.0005839769583134363600 ), + .UNSPECIFIED. ) ; +#54868 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54869 = ORIENTED_EDGE ( 'NONE', *, *, #50358, .T. ) ; +#54870 = ORIENTED_EDGE ( 'NONE', *, *, #56929, .T. ) ; +#54871 = EDGE_CURVE ( 'NONE', #45253, #39795, #17702, .T. ) ; +#54872 = ORIENTED_EDGE ( 'NONE', *, *, #53078, .T. ) ; +#54873 = EDGE_CURVE ( 'NONE', #49449, #4704, #3211, .T. ) ; +#54874 = ORIENTED_EDGE ( 'NONE', *, *, #7973, .F. ) ; +#54875 = CONICAL_SURFACE ( 'NONE', #50227, 10.50000000000009600, 0.7853981633974500600 ) ; +#54876 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 28.66666666666668600, 4.294441961969993400 ) ) ; +#54877 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561200, 85.79999999999998300, -28.70525300642875200 ) ) ; +#54878 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#54879 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 71.25732391202386400, -28.20555803803014400 ) ) ; +#54880 = AXIS2_PLACEMENT_3D ( 'NONE', #33838, #77354, #40073 ) ; +#54881 = EDGE_CURVE ( 'NONE', #11157, #46910, #43417, .T. ) ; +#54882 = CARTESIAN_POINT ( 'NONE', ( -8.939071942967194300, 10.00000000000006900, -28.70555803802998100 ) ) ; +#54883 = EDGE_CURVE ( 'NONE', #29236, #71511, #41480, .T. ) ; +#54884 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54885 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529400, 45.23212903577628900, -28.37244029424742200 ) ) ; +#54886 = EDGE_CURVE ( 'NONE', #38741, #32145, #30819, .T. ) ; +#54887 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656715200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#54888 = ADVANCED_FACE ( 'NONE', ( #58030 ), #70670, .T. ) ; +#54889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54890 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999100, 17.81066373133471700, -28.53923937255197200 ) ) ; +#54891 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#54892 = AXIS2_PLACEMENT_3D ( 'NONE', #73901, #80134, #30400 ) ; +#54893 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54894 = CIRCLE ( 'NONE', #63340, 10.50000000000009600 ) ; +#54895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54896 = CARTESIAN_POINT ( 'NONE', ( -10.93543899802686200, 61.50961459723759400, -28.29483879644633500 ) ) ; +#54897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54898 = CARTESIAN_POINT ( 'NONE', ( 17.41676902789866300, 96.43440607826356400, -27.47480746991325500 ) ) ; +#54900 = VERTEX_POINT ( 'NONE', #46041 ) ; +#54899 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#54901 = AXIS2_PLACEMENT_3D ( 'NONE', #15020, #51708, #64833 ) ; +#54902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54903 = AXIS2_PLACEMENT_3D ( 'NONE', #72301, #35040, #78561 ) ; +#54904 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609168300, 81.46283204837325800, -28.48697406221694800 ) ) ; +#54905 = AXIS2_PLACEMENT_3D ( 'NONE', #18867, #62394, #25136 ) ; +#54906 = ORIENTED_EDGE ( 'NONE', *, *, #36534, .F. ) ; +#54907 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77519, #59019, #65326, #28057 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#54908 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54909 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#54910 = CIRCLE ( 'NONE', #27149, 10.50000000000009600 ) ; +#54911 = ORIENTED_EDGE ( 'NONE', *, *, #77378, .F. ) ; +#54912 = FACE_OUTER_BOUND ( 'NONE', #31052, .T. ) ; +#54913 = ORIENTED_EDGE ( 'NONE', *, *, #59103, .T. ) ; +#54914 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 32.16666666666667900, 0.9380355014189834000 ) ) ; +#54915 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 51.25732391202397800, -28.20555803802997700 ) ) ; +#54916 = ORIENTED_EDGE ( 'NONE', *, *, #27026, .F. ) ; +#54917 = CONICAL_SURFACE ( 'NONE', #79268, 10.00000000000009200, 0.7853981633974447300 ) ; +#54918 = CONICAL_SURFACE ( 'NONE', #26802, 10.50000000000009800, 0.7853981633974500600 ) ; +#54919 = VERTEX_POINT ( 'NONE', #2522 ) ; +#54920 = ORIENTED_EDGE ( 'NONE', *, *, #16306, .T. ) ; +#54921 = ORIENTED_EDGE ( 'NONE', *, *, #5440, .T. ) ; +#54922 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609141700, 70.13716795162640900, -28.48697406221694500 ) ) ; +#54923 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339104700, 51.46283204837309500, -28.48697406221716100 ) ) ; +#54924 = AXIS2_PLACEMENT_3D ( 'NONE', #33826, #77341, #40065 ) ; +#54925 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54926 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#54927 = CARTESIAN_POINT ( 'NONE', ( 4.602661550804643100, 57.15000000000001300, -9.105332570889233400 ) ) ; +#54928 = CIRCLE ( 'NONE', #76346, 10.00000000000009400 ) ; +#54929 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875016000, 55.13282980700518000, -28.53914313452737900 ) ) ; +#54930 = ORIENTED_EDGE ( 'NONE', *, *, #63419, .T. ) ; +#54931 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#54932 = CONICAL_SURFACE ( 'NONE', #62298, 10.50000000000009600, 0.7853981633974518300 ) ; +#54933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54934 = ORIENTED_EDGE ( 'NONE', *, *, #39223, .T. ) ; +#54935 = EDGE_CURVE ( 'NONE', #34438, #1549, #69538, .T. ) ; +#54936 = ORIENTED_EDGE ( 'NONE', *, *, #68601, .T. ) ; +#54937 = EDGE_LOOP ( 'NONE', ( #50547, #30681, #5469, #16174 ) ) ; +#54938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54939 = AXIS2_PLACEMENT_3D ( 'NONE', #76190, #45142, #32677 ) ; +#54940 = ORIENTED_EDGE ( 'NONE', *, *, #37788, .T. ) ; +#54941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54942 = ORIENTED_EDGE ( 'NONE', *, *, #78264, .T. ) ; +#54943 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#54944 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#54945 = CIRCLE ( 'NONE', #43366, 9.500000000000095900 ) ; +#54946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26014, #7190, #32245, #75743 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562056600, 0.001319946300100726200 ), + .UNSPECIFIED. ) ; +#54947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54948 = ADVANCED_FACE ( 'NONE', ( #23002 ), #37557, .F. ) ; +#54949 = EDGE_LOOP ( 'NONE', ( #62909, #11640, #37177, #8533, #67671 ) ) ; +#54950 = AXIS2_PLACEMENT_3D ( 'NONE', #40144, #2881, #46363 ) ; +#54951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54952 = ORIENTED_EDGE ( 'NONE', *, *, #6703, .T. ) ; +#54953 = CIRCLE ( 'NONE', #71600, 9.500000000000101300 ) ; +#54954 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11616, #48837, #24130, #67632 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002317346715348184100, 0.0006984166105118000700 ), + .UNSPECIFIED. ) ; +#54955 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660888200, 80.13716795162605400, -28.48697406221736400 ) ) ; +#54956 = ADVANCED_FACE ( 'NONE', ( #39523 ), #4487, .F. ) ; +#54957 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 0.6666666666666835100, 3.124568980892192800 ) ) ; +#54958 = AXIS2_PLACEMENT_3D ( 'NONE', #2753, #46263, #9013 ) ; +#54959 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 40.83333333333335000, 6.794441961969992500 ) ) ; +#54960 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310632700, 81.49769010897038900, -28.61774594594310300 ) ) ; +#54961 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 61.43945992495501000, -28.34042301926918800 ) ) ; +#54962 = EDGE_CURVE ( 'NONE', #33234, #26414, #21055, .T. ) ; +#54963 = CIRCLE ( 'NONE', #54330, 10.50000000000009600 ) ; +#54964 = ADVANCED_FACE ( 'NONE', ( #26915 ), #21610, .T. ) ; +#54965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54967 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 6.000000000000005300, -9.205558038030005700 ) ) ; +#54968 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 63.65857157145661200, -28.20555803803030800 ) ) ; +#54969 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#54970 = ORIENTED_EDGE ( 'NONE', *, *, #911, .T. ) ; +#54971 = CIRCLE ( 'NONE', #26032, 10.00000000000009400 ) ; +#54972 = EDGE_LOOP ( 'NONE', ( #43738, #32219, #71107, #73868 ) ) ; +#54973 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54974 = ORIENTED_EDGE ( 'NONE', *, *, #50195, .F. ) ; +#54975 = ADVANCED_FACE ( 'NONE', ( #6441 ), #52847, .T. ) ; +#54976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54977 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000043300, 88.62623792124928500, -28.70555803803047500 ) ) ; +#54978 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#54979 = CONICAL_SURFACE ( 'NONE', #35952, 10.50000000000009400, 0.7853981633974500600 ) ; +#54980 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188352900, 28.70564881207761600, -28.41114655922298100 ) ) ; +#54981 = CIRCLE ( 'NONE', #6436, 10.50000000000009800 ) ; +#54982 = EDGE_CURVE ( 'NONE', #47181, #48282, #72651, .T. ) ; +#54983 = ORIENTED_EDGE ( 'NONE', *, *, #4142, .T. ) ; +#54984 = EDGE_CURVE ( 'NONE', #15056, #77629, #54121, .T. ) ; +#54985 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049498400, 28.19228657120670400, -28.53891855579992400 ) ) ; +#54986 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389083100, 70.49763722318456900, -28.32100408376087600 ) ) ; +#54987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54988 = CIRCLE ( 'NONE', #53158, 10.00000000000009400 ) ; +#54989 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 83.99926474563204700, -28.70555803803007700 ) ) ; +#54990 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#54991 = ORIENTED_EDGE ( 'NONE', *, *, #9856, .T. ) ; +#54992 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54995 = ORIENTED_EDGE ( 'NONE', *, *, #14512, .F. ) ; +#54994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#54997 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000700, 44.44999999999999600, -2.478176394252585300E-015 ) ) ; +#54998 = CARTESIAN_POINT ( 'NONE', ( 3.160449548281063100, 60.46231468379674100, -28.37082013777818900 ) ) ; +#54999 = AXIS2_PLACEMENT_3D ( 'NONE', #36550, #17815, #80088 ) ; +#55000 = EDGE_CURVE ( 'NONE', #34811, #29005, #68725, .T. ) ; +#55001 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609427700, 51.46283204837339300, -28.48697406221667100 ) ) ; +#55002 = EDGE_CURVE ( 'NONE', #64099, #9377, #55070, .T. ) ; +#55003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55004 = EDGE_CURVE ( 'NONE', #4381, #1113, #40620, .T. ) ; +#55005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70900, #27424, #77163, #39902 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838258881786700E-007, 0.0004559721492010578300 ), + .UNSPECIFIED. ) ; +#55006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55007 = CYLINDRICAL_SURFACE ( 'NONE', #29462, 10.00000000000000200 ) ; +#55008 = PLANE ( 'NONE', #77441 ) ; +#55009 = EDGE_CURVE ( 'NONE', #10382, #11721, #26194, .T. ) ; +#55010 = ORIENTED_EDGE ( 'NONE', *, *, #17799, .T. ) ; +#55011 = AXIS2_PLACEMENT_3D ( 'NONE', #41864, #4616, #48098 ) ; +#55012 = VECTOR ( 'NONE', #40652, 1000.000000000000000 ) ; +#55013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55014 = ORIENTED_EDGE ( 'NONE', *, *, #39104, .T. ) ; +#55015 = VERTEX_POINT ( 'NONE', #41156 ) ; +#55016 = ORIENTED_EDGE ( 'NONE', *, *, #42959, .T. ) ; +#55017 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#55018 = ORIENTED_EDGE ( 'NONE', *, *, #51728, .T. ) ; +#55019 = CONICAL_SURFACE ( 'NONE', #18242, 10.00000000000009200, 0.7853981633974447300 ) ; +#55020 = CARTESIAN_POINT ( 'NONE', ( 7.899665551839515100, 60.80000000000000400, -28.20555803802989600 ) ) ; +#55021 = AXIS2_PLACEMENT_3D ( 'NONE', #42621, #5387, #48865 ) ; +#55022 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 90.16749699759755300, -28.20555803803030800 ) ) ; +#55023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55024 = ORIENTED_EDGE ( 'NONE', *, *, #32569, .F. ) ; +#55025 = AXIS2_PLACEMENT_3D ( 'NONE', #66857, #29618, #73113 ) ; +#55026 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#55027 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285713500, 22.67681279774500100, -28.70555803802995200 ) ) ; +#55028 = ORIENTED_EDGE ( 'NONE', *, *, #16190, .F. ) ; +#55029 = CIRCLE ( 'NONE', #80054, 10.50000000000009800 ) ; +#55030 = ORIENTED_EDGE ( 'NONE', *, *, #7385, .T. ) ; +#55031 = ORIENTED_EDGE ( 'NONE', *, *, #67405, .T. ) ; +#55032 = FACE_OUTER_BOUND ( 'NONE', #73549, .T. ) ; +#55033 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 35.04999999999999700, -28.20555803802995200 ) ) ; +#55034 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37928, #50410, #69228, #31970 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851665455400, 0.0005685240369921936400 ), + .UNSPECIFIED. ) ; +#55035 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 46.83333333333335700, -3.349151577478984600 ) ) ; +#55036 = AXIS2_PLACEMENT_3D ( 'NONE', #7897, #14184, #45127 ) ; +#55037 = EDGE_CURVE ( 'NONE', #39470, #52219, #11726, .T. ) ; +#55038 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433200, 43.66464174796073600, -28.53896444442201000 ) ) ; +#55039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55040 = ADVANCED_FACE ( 'NONE', ( #52147 ), #33685, .T. ) ; +#55041 = CIRCLE ( 'NONE', #58984, 10.00000000000009600 ) ; +#55042 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#55043 = EDGE_CURVE ( 'NONE', #35494, #66219, #78021, .T. ) ; +#55044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7449, #44678, #76008, #38707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377688403284500E-007, 0.0007331055842532350500 ), + .UNSPECIFIED. ) ; +#55045 = AXIS2_PLACEMENT_3D ( 'NONE', #30303, #73798, #36502 ) ; +#55046 = ORIENTED_EDGE ( 'NONE', *, *, #45324, .F. ) ; +#55047 = ORIENTED_EDGE ( 'NONE', *, *, #71699, .T. ) ; +#55048 = CONICAL_SURFACE ( 'NONE', #32202, 10.00000000000009200, 0.7853981633974447300 ) ; +#55049 = ADVANCED_FACE ( 'NONE', ( #19084 ), #574, .T. ) ; +#55050 = ORIENTED_EDGE ( 'NONE', *, *, #70589, .T. ) ; +#55051 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#55052 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55053 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 18.16666666666667100, -4.152999154772358800 ) ) ; +#55054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55055 = CIRCLE ( 'NONE', #44709, 10.00000000000009600 ) ; +#55056 = AXIS2_PLACEMENT_3D ( 'NONE', #70099, #32846, #76363 ) ; +#55057 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719592300, 22.65857157145700300, -28.37229765499279600 ) ) ; +#55058 = CONICAL_SURFACE ( 'NONE', #41816, 10.50000000000009800, 0.7853981633974518300 ) ; +#55059 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811645500, 49.70564881207761900, -28.41114655922300600 ) ) ; +#55060 = ORIENTED_EDGE ( 'NONE', *, *, #31307, .T. ) ; +#55061 = ADVANCED_FACE ( 'NONE', ( #56079 ), #48241, .T. ) ; +#55062 = CONICAL_SURFACE ( 'NONE', #24469, 10.00000000000009600, 0.7853981633974482800 ) ; +#55063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55064 = ORIENTED_EDGE ( 'NONE', *, *, #7414, .F. ) ; +#55065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55066 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063264800, 41.59789380924897300, -28.25343951603330700 ) ) ; +#55067 = ORIENTED_EDGE ( 'NONE', *, *, #11649, .T. ) ; +#55068 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760600, 31.52620220503713000, -28.70555803802995200 ) ) ; +#55069 = AXIS2_PLACEMENT_3D ( 'NONE', #80714, #12452, #49396 ) ; +#55070 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59398, #22131, #78165, #40892, #3610, #47113 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409455600, 0.003857515824818911300 ), + .UNSPECIFIED. ) ; +#55071 = FACE_OUTER_BOUND ( 'NONE', #32552, .T. ) ; +#55072 = ADVANCED_FACE ( 'NONE', ( #35653 ), #15182, .F. ) ; +#55073 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55075 = CIRCLE ( 'NONE', #13236, 10.50000000000009200 ) ; +#55074 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000008000, 49.66666666666668600, -8.133761268305514500 ) ) ; +#55076 = ORIENTED_EDGE ( 'NONE', *, *, #64445, .T. ) ; +#55077 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#55078 = EDGE_CURVE ( 'NONE', #33956, #75589, #31742, .T. ) ; +#55079 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 52.66666666666668600, 3.124568980892192800 ) ) ; +#55080 = VERTEX_POINT ( 'NONE', #35202 ) ; +#55081 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609179900, 23.91466791010185100, -28.53910738522646500 ) ) ; +#55082 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#55083 = EDGE_LOOP ( 'NONE', ( #30104, #12294, #57575 ) ) ; +#55084 = VERTEX_POINT ( 'NONE', #66730 ) ; +#55085 = ORIENTED_EDGE ( 'NONE', *, *, #27924, .T. ) ; +#55086 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883573700, 30.89435118792235400, -28.41114655922301000 ) ) ; +#55087 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 71.25489551879202600, -28.37193179497697000 ) ) ; +#55088 = CONICAL_SURFACE ( 'NONE', #16203, 10.50000000000009600, 0.7853981633974500600 ) ; +#55089 = FACE_OUTER_BOUND ( 'NONE', #1923, .T. ) ; +#55090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55091 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274462700, 28.80622828441264000, -28.24172590004348000 ) ) ; +#55093 = ORIENTED_EDGE ( 'NONE', *, *, #56275, .T. ) ; +#55092 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#55094 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55095 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732780400, 61.93585231025905100, -28.38420446581295000 ) ) ; +#55096 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 39.15930907398619400, -28.35186440610857500 ) ) ; +#55097 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55098 = EDGE_LOOP ( 'NONE', ( #65280, #24645, #36073, #23374 ) ) ; +#55099 = FACE_OUTER_BOUND ( 'NONE', #49926, .T. ) ; +#55100 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963800, 74.37738371066723200, -28.70555803803047500 ) ) ; +#55101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55102 = EDGE_CURVE ( 'NONE', #42624, #3142, #17151, .T. ) ; +#55103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55104 = ORIENTED_EDGE ( 'NONE', *, *, #77819, .T. ) ; +#55105 = FACE_OUTER_BOUND ( 'NONE', #74014, .T. ) ; +#55106 = EDGE_CURVE ( 'NONE', #58176, #65962, #63582, .T. ) ; +#55107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55108 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55109 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655445700, 10.17701665379220800, -28.20555803802993500 ) ) ; +#55110 = AXIS2_PLACEMENT_3D ( 'NONE', #55200, #42685, #79441 ) ; +#55111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55112 = EDGE_CURVE ( 'NONE', #78782, #40985, #66785, .T. ) ; +#55113 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504767000, 10.40771342879332000, -28.53891855579987100 ) ) ; +#55114 = ORIENTED_EDGE ( 'NONE', *, *, #23431, .T. ) ; +#55115 = EDGE_CURVE ( 'NONE', #58986, #23993, #50193, .T. ) ; +#55116 = AXIS2_PLACEMENT_3D ( 'NONE', #14001, #51202, #26527 ) ; +#55117 = CIRCLE ( 'NONE', #9415, 10.00000000000009600 ) ; +#55119 = ORIENTED_EDGE ( 'NONE', *, *, #59663, .F. ) ; +#55118 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#55120 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 59.00000000000000700, -12.20555803803000200 ) ) ; +#55121 = CIRCLE ( 'NONE', #15480, 9.500000000000099500 ) ; +#55122 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44083, #598, #50345, #13160 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572897600, 0.0008043487657983068000 ), + .UNSPECIFIED. ) ; +#55123 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063728400, 18.00210619075103200, -28.25343951603372600 ) ) ; +#55124 = EDGE_LOOP ( 'NONE', ( #76157, #12571, #27106 ) ) ; +#55125 = FACE_OUTER_BOUND ( 'NONE', #31275, .T. ) ; +#55126 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 24.16666666666667100, 3.794441961969996900 ) ) ; +#55127 = AXIS2_PLACEMENT_3D ( 'NONE', #20892, #64436, #27148 ) ; +#55128 = ORIENTED_EDGE ( 'NONE', *, *, #36401, .F. ) ; +#55129 = EDGE_CURVE ( 'NONE', #37986, #28740, #2510, .T. ) ; +#55130 = EDGE_CURVE ( 'NONE', #65030, #5994, #49060, .T. ) ; +#55131 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430200, 31.17701665379239600, -28.20555803802996000 ) ) ; +#55132 = AXIS2_PLACEMENT_3D ( 'NONE', #44393, #914, #44131 ) ; +#55133 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#55134 = FACE_OUTER_BOUND ( 'NONE', #13587, .T. ) ; +#55135 = FACE_OUTER_BOUND ( 'NONE', #51471, .T. ) ; +#55136 = ORIENTED_EDGE ( 'NONE', *, *, #17856, .F. ) ; +#55137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55138 = CARTESIAN_POINT ( 'NONE', ( 16.43537571558478300, 50.68842900094368500, -28.60406354543175300 ) ) ; +#55139 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 26.50000000000001100, -9.258116921287651700 ) ) ; +#55140 = EDGE_LOOP ( 'NONE', ( #22168, #8320, #57927, #5996 ) ) ; +#55141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55142 = EDGE_CURVE ( 'NONE', #27539, #4381, #34659, .T. ) ; +#55143 = VERTEX_POINT ( 'NONE', #60748 ) ; +#55144 = AXIS2_PLACEMENT_3D ( 'NONE', #43286, #6056, #49522 ) ; +#55145 = AXIS2_PLACEMENT_3D ( 'NONE', #78234, #40968, #3683 ) ; +#55146 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#55147 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305485700, 79.70395328581638200, -28.70555803803002000 ) ) ; +#55148 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#55149 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.36762008758047700, -28.26633708900882900 ) ) ; +#55150 = CONICAL_SURFACE ( 'NONE', #44369, 10.00000000000009200, 0.7853981633974447300 ) ; +#55151 = ORIENTED_EDGE ( 'NONE', *, *, #9306, .F. ) ; +#55152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55153 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#55154 = EDGE_LOOP ( 'NONE', ( #76882, #51922, #61423 ) ) ; +#55155 = ADVANCED_FACE ( 'NONE', ( #62899 ), #60944, .T. ) ; +#55156 = EDGE_LOOP ( 'NONE', ( #67215, #37932, #75598, #46626, #40021 ) ) ; +#55157 = ORIENTED_EDGE ( 'NONE', *, *, #39385, .T. ) ; +#55158 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 28.66349705304866500, -28.30782889147480600 ) ) ; +#55159 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112214000, 39.57332680091207800, -28.37233769390155700 ) ) ; +#55160 = ORIENTED_EDGE ( 'NONE', *, *, #237, .T. ) ; +#55161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55162 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730255300, 71.58737389638849900, -28.29936525552453100 ) ) ; +#55163 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489075000, 20.12856921007284000, -28.37063977681166400 ) ) ; +#55164 = ADVANCED_FACE ( 'NONE', ( #13256 ), #27857, .F. ) ; +#55165 = FACE_OUTER_BOUND ( 'NONE', #51314, .T. ) ; +#55166 = CARTESIAN_POINT ( 'NONE', ( 9.904737509656014200, 17.92298334620663500, -28.20555803803009800 ) ) ; +#55167 = VERTEX_POINT ( 'NONE', #80033 ) ; +#55168 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661468400, 10.10677350908812300, -28.30799595738914900 ) ) ; +#55169 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40189, #46417, #65262, #28004 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693237678500E-007, 0.0008724363063898831700 ), + .UNSPECIFIED. ) ; +#55170 = ADVANCED_FACE ( 'NONE', ( #77468 ), #75508, .T. ) ; +#55171 = ORIENTED_EDGE ( 'NONE', *, *, #8172, .F. ) ; +#55172 = CARTESIAN_POINT ( 'NONE', ( -2.785741443455965100, 51.52472935029898300, -28.39317435246130800 ) ) ; +#55173 = CIRCLE ( 'NONE', #64372, 10.00000000000009600 ) ; +#55174 = AXIS2_PLACEMENT_3D ( 'NONE', #64850, #9030, #77327 ) ; +#55175 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 30.00000000000001800, -1.205558038030005300 ) ) ; +#55176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55177 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55178 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37297, #12589, #31361, #74871 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421251874400, 0.0008027336008648024900 ), + .UNSPECIFIED. ) ; +#55179 = EDGE_LOOP ( 'NONE', ( #54324, #8934, #31652, #75840 ) ) ; +#55180 = FACE_OUTER_BOUND ( 'NONE', #36202, .T. ) ; +#55181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24059, #61337, #73821, #36538 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001246264537621180200 ), + .UNSPECIFIED. ) ; +#55182 = FACE_OUTER_BOUND ( 'NONE', #42813, .T. ) ; +#55183 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#55184 = AXIS2_PLACEMENT_3D ( 'NONE', #4252, #47754, #10522 ) ; +#55185 = PLANE ( 'NONE', #34539 ) ; +#55186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55187 = CARTESIAN_POINT ( 'NONE', ( 7.976632108935543600, 57.14999999999997000, -3.586726974263015700 ) ) ; +#55188 = VERTEX_POINT ( 'NONE', #18018 ) ; +#55189 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#55190 = EDGE_CURVE ( 'NONE', #66446, #48057, #11299, .T. ) ; +#55191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47122, #3615, #53408, #16154 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671484908600E-007, 0.0007670610367941474600 ), + .UNSPECIFIED. ) ; +#55192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55193 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#55194 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.10252595950258200, -28.26641963845859700 ) ) ; +#55195 = AXIS2_PLACEMENT_3D ( 'NONE', #23501, #4988, #60774 ) ; +#55196 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.43250300240229200, -28.20555803802997700 ) ) ; +#55197 = CONICAL_SURFACE ( 'NONE', #1553, 10.50000000000009400, 0.7853981633974482800 ) ; +#55198 = EDGE_LOOP ( 'NONE', ( #76936, #54340, #39373, #34229 ) ) ; +#55199 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000101300, 70.79999999999982700, -28.70555803802997700 ) ) ; +#55200 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#55201 = EDGE_LOOP ( 'NONE', ( #824, #56437, #36499 ) ) ; +#55202 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857159700, 57.92318720225497900, -28.70555803802997700 ) ) ; +#55203 = VERTEX_POINT ( 'NONE', #67794 ) ; +#55204 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086480700, 49.97187418724321600, -28.37194250757537300 ) ) ; +#55205 = FACE_OUTER_BOUND ( 'NONE', #79215, .T. ) ; +#55206 = EDGE_LOOP ( 'NONE', ( #71110, #22876, #26, #62272, #18629 ) ) ; +#55207 = CARTESIAN_POINT ( 'NONE', ( -16.99797853026622400, 39.28907435382948400, -28.25433648786265600 ) ) ; +#55208 = FACE_OUTER_BOUND ( 'NONE', #30629, .T. ) ; +#55210 = EDGE_CURVE ( 'NONE', #21296, #53544, #64853, .T. ) ; +#55209 = EDGE_LOOP ( 'NONE', ( #16530, #47567, #53393 ) ) ; +#55211 = EDGE_CURVE ( 'NONE', #9754, #893, #20192, .T. ) ; +#55212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #279, #74823, #31322, #6546 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141652934300 ), + .UNSPECIFIED. ) ; +#55213 = VERTEX_POINT ( 'NONE', #43017 ) ; +#55214 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, -1.499999999999983100, -4.865812075874393000 ) ) ; +#55215 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.87705528805138800, -28.20555803802996700 ) ) ; +#55216 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31053, #68303, #62071, #74573 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735926810700E-007, 0.0009376786059871952700 ), + .UNSPECIFIED. ) ; +#55217 = EDGE_CURVE ( 'NONE', #75213, #25542, #5722, .T. ) ; +#55218 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#55219 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 38.66666666666668600, -8.133761268305512700 ) ) ; +#55220 = CONICAL_SURFACE ( 'NONE', #67196, 10.50000000000009600, 0.7853981633974482800 ) ; +#55221 = EDGE_CURVE ( 'NONE', #44625, #57688, #72062, .T. ) ; +#55222 = FACE_OUTER_BOUND ( 'NONE', #68345, .T. ) ; +#55223 = ORIENTED_EDGE ( 'NONE', *, *, #60604, .F. ) ; +#55224 = AXIS2_PLACEMENT_3D ( 'NONE', #66604, #29120, #23091 ) ; +#55225 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#55226 = ORIENTED_EDGE ( 'NONE', *, *, #67969, .F. ) ; +#55227 = VERTEX_POINT ( 'NONE', #68317 ) ; +#55228 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818086000, 71.65075715145327700, -28.20555803803047800 ) ) ; +#55229 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 41.06914835874665900, -28.45573375118225800 ) ) ; +#55230 = VERTEX_POINT ( 'NONE', #31073 ) ; +#55231 = VERTEX_POINT ( 'NONE', #74589 ) ; +#55232 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 3.833333333333348100, 6.794441961969992500 ) ) ; +#55233 = VERTEX_POINT ( 'NONE', #24813 ) ; +#55234 = CARTESIAN_POINT ( 'NONE', ( 9.695954216608885900, 80.13716795162622500, -28.48697406221719300 ) ) ; +#55235 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55236 = EDGE_LOOP ( 'NONE', ( #23625, #67025, #28817, #33170 ) ) ; +#55237 = AXIS2_PLACEMENT_3D ( 'NONE', #56797, #19547, #63071 ) ; +#55238 = EDGE_CURVE ( 'NONE', #60793, #49502, #29832, .T. ) ; +#55239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55240 = EDGE_CURVE ( 'NONE', #67675, #46519, #44322, .T. ) ; +#55241 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55242 = EDGE_CURVE ( 'NONE', #35498, #70214, #79432, .T. ) ; +#55243 = ADVANCED_FACE ( 'NONE', ( #46280 ), #40464, .F. ) ; +#55244 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55245 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805684700, 26.18572799237469800, -28.67630847257079200 ) ) ; +#55246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55247 = CONICAL_SURFACE ( 'NONE', #51132, 10.00000000000009400, 0.7853981633974447300 ) ; +#55248 = CARTESIAN_POINT ( 'NONE', ( -9.438065798940465700, 18.11613388835919400, -28.57723500840075900 ) ) ; +#55249 = VERTEX_POINT ( 'NONE', #18623 ) ; +#55250 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55251 = EDGE_LOOP ( 'NONE', ( #43223, #29478, #50497 ) ) ; +#55252 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218858600, 39.67436051799355600, -28.45080305021057400 ) ) ; +#55253 = CARTESIAN_POINT ( 'NONE', ( -9.997978530266220100, 18.28907435382948400, -28.25433648786263100 ) ) ; +#55254 = CARTESIAN_POINT ( 'NONE', ( 15.11625473641676500, 45.54999999999998300, -28.53994725305376800 ) ) ; +#55255 = AXIS2_PLACEMENT_3D ( 'NONE', #65850, #28618, #72116 ) ; +#55256 = PLANE ( 'NONE', #63645 ) ; +#55257 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339055500, 81.46283204837337200, -28.48697406221665300 ) ) ; +#55258 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 60.79999999999999000, -28.20555803802997700 ) ) ; +#55259 = CIRCLE ( 'NONE', #15168, 10.00000000000009200 ) ; +#55260 = EDGE_CURVE ( 'NONE', #56207, #9324, #57030, .T. ) ; +#55261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55262 = ADVANCED_FACE ( 'NONE', ( #25901 ), #71624, .F. ) ; +#55263 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807170800, 54.80000000000001100, -28.70555803802997700 ) ) ; +#55264 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#55265 = AXIS2_PLACEMENT_3D ( 'NONE', #78673, #41376, #4122 ) ; +#55266 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55267 = AXIS2_PLACEMENT_3D ( 'NONE', #54990, #67512, #30286 ) ; +#55268 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451035100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#55269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55270 = ORIENTED_EDGE ( 'NONE', *, *, #13802, .T. ) ; +#55271 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#55272 = CARTESIAN_POINT ( 'NONE', ( -9.530136888809618500, 9.146957350529762100, -28.66910751791843400 ) ) ; +#55273 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55275 = CIRCLE ( 'NONE', #22901, 9.500000000000097700 ) ; +#55276 = ORIENTED_EDGE ( 'NONE', *, *, #61577, .F. ) ; +#55277 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55278 = ORIENTED_EDGE ( 'NONE', *, *, #78371, .F. ) ; +#55279 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#55280 = CIRCLE ( 'NONE', #16974, 9.500000000000095900 ) ; +#55281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55282 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 80.16749699759736800, -28.20555803803047800 ) ) ; +#55283 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987500, 51.65075715145281500, -28.20555803802997700 ) ) ; +#55284 = ADVANCED_FACE ( 'NONE', ( #73575 ), #38479, .F. ) ; +#55285 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41245, #47466, #53763, #16515 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534782300 ), + .UNSPECIFIED. ) ; +#55286 = AXIS2_PLACEMENT_3D ( 'NONE', #74657, #37088, #68123 ) ; +#55287 = FACE_OUTER_BOUND ( 'NONE', #8385, .T. ) ; +#55288 = ORIENTED_EDGE ( 'NONE', *, *, #11033, .F. ) ; +#55289 = CARTESIAN_POINT ( 'NONE', ( -1.824291588454751400E-013, 64.13556610137268900, -28.54207364681948500 ) ) ; +#55290 = EDGE_LOOP ( 'NONE', ( #72515, #37589, #10313, #3162, #12239 ) ) ; +#55291 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 44.66666666666667100, 2.794441961969992100 ) ) ; +#55292 = ORIENTED_EDGE ( 'NONE', *, *, #66088, .F. ) ; +#55293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55294 = AXIS2_PLACEMENT_3D ( 'NONE', #59656, #15851, #40864 ) ; +#55295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45723, #70504, #14761, #58266 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714865434900E-007, 0.0005869108620980738700 ), + .UNSPECIFIED. ) ; +#55296 = CARTESIAN_POINT ( 'NONE', ( 10.46947945219830500, 91.59999999999999400, -28.70555803802999500 ) ) ; +#55297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55298 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 70.51916201875668800, -28.45106778992437700 ) ) ; +#55299 = EDGE_CURVE ( 'NONE', #68913, #11733, #42402, .T. ) ; +#55300 = FACE_OUTER_BOUND ( 'NONE', #57448, .T. ) ; +#55301 = CONICAL_SURFACE ( 'NONE', #59455, 10.50000000000009600, 0.7853981633974500600 ) ; +#55302 = EDGE_LOOP ( 'NONE', ( #7204, #16713, #70170 ) ) ; +#55303 = EDGE_LOOP ( 'NONE', ( #22382, #64929, #5065, #53372 ) ) ; +#55304 = AXIS2_PLACEMENT_3D ( 'NONE', #79339, #42044, #4785 ) ; +#55305 = ORIENTED_EDGE ( 'NONE', *, *, #68522, .T. ) ; +#55306 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730372500, 60.01262610361149500, -28.29936525552455300 ) ) ; +#55307 = EDGE_LOOP ( 'NONE', ( #69135, #27272, #32003, #68797, #15672 ) ) ; +#55308 = EDGE_LOOP ( 'NONE', ( #62145, #69010, #1377, #42924 ) ) ; +#55309 = VERTEX_POINT ( 'NONE', #62152 ) ; +#55310 = ORIENTED_EDGE ( 'NONE', *, *, #58217, .T. ) ; +#55311 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#55312 = ORIENTED_EDGE ( 'NONE', *, *, #61574, .T. ) ; +#55313 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69246, #63000, #26019, #69494 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621158300 ), + .UNSPECIFIED. ) ; +#55314 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195753400, 48.50972971738993800, -28.70555803802997000 ) ) ; +#55315 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#55316 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 16.00000000000001400, -1.205558038030002800 ) ) ; +#55317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55318 = CONICAL_SURFACE ( 'NONE', #35010, 10.50000000000009600, 0.7853981633974500600 ) ; +#55319 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344080000, 38.92298334620767300, -28.20555803802995200 ) ) ; +#55320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55321 = EDGE_CURVE ( 'NONE', #9775, #69763, #57565, .T. ) ; +#55322 = ORIENTED_EDGE ( 'NONE', *, *, #63004, .F. ) ; +#55323 = ORIENTED_EDGE ( 'NONE', *, *, #56407, .F. ) ; +#55324 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901135700, 49.56267502090525300, -28.41043597897442700 ) ) ; +#55325 = EDGE_CURVE ( 'NONE', #30761, #46133, #43092, .T. ) ; +#55326 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120822000, 41.21901109451852800, -28.33427604305564500 ) ) ; +#55327 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328940900, 28.36201280598323700, -28.29447340919133300 ) ) ; +#55328 = CARTESIAN_POINT ( 'NONE', ( 10.97684032349359000, 41.51912043132477200, -28.30223257055575200 ) ) ; +#55329 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825473900, 80.16054007504465100, -28.34042301926890100 ) ) ; +#55330 = CIRCLE ( 'NONE', #58888, 9.500000000000097700 ) ; +#55331 = EDGE_CURVE ( 'NONE', #20976, #73086, #28709, .T. ) ; +#55332 = ORIENTED_EDGE ( 'NONE', *, *, #60023, .F. ) ; +#55333 = ADVANCED_FACE ( 'NONE', ( #7357 ), #69656, .F. ) ; +#55334 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008000, 26.44142842854304100, -28.20555803802994200 ) ) ; +#55335 = EDGE_CURVE ( 'NONE', #70776, #22543, #14198, .T. ) ; +#55336 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 47.50000000000000700, 4.650848422521016300 ) ) ; +#55337 = AXIS2_PLACEMENT_3D ( 'NONE', #78775, #41475, #4213 ) ; +#55338 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 80.89350487330096900, -28.45034744217088700 ) ) ; +#55339 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 50.50000000000002100, -4.865812075874393000 ) ) ; +#55340 = EDGE_CURVE ( 'NONE', #19874, #40556, #55055, .T. ) ; +#55341 = CONICAL_SURFACE ( 'NONE', #19204, 10.50000000000009600, 0.7853981633974500600 ) ; +#55342 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474175900, 10.36172549728292400, -28.47230003642280100 ) ) ; +#55343 = VERTEX_POINT ( 'NONE', #7160 ) ; +#55344 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 41.43250300240230600, -28.20555803802997700 ) ) ; +#55345 = VERTEX_POINT ( 'NONE', #63236 ) ; +#55346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55347 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55348 = ADVANCED_FACE ( 'NONE', ( #58966 ), #20043, .F. ) ; +#55349 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55350 = AXIS2_PLACEMENT_3D ( 'NONE', #31534, #25275, #68521 ) ; +#55351 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 87.92318720225497900, -28.70555803802997700 ) ) ; +#55352 = EDGE_CURVE ( 'NONE', #32428, #54691, #80523, .T. ) ; +#55353 = EDGE_CURVE ( 'NONE', #14665, #27031, #66070, .T. ) ; +#55354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68235, #24720, #80743, #43461 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199220200, 0.005783220423748033600 ), + .UNSPECIFIED. ) ; +#55355 = EDGE_CURVE ( 'NONE', #893, #67971, #36557, .T. ) ; +#55356 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 61.65075715145215400, -28.20555803803047800 ) ) ; +#55357 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 39.24722181384565500, -28.70555803802998400 ) ) ; +#55358 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55359 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#55360 = AXIS2_PLACEMENT_3D ( 'NONE', #21886, #65438, #15633 ) ; +#55361 = CONICAL_SURFACE ( 'NONE', #34309, 10.50000000000009200, 0.7853981633974482800 ) ; +#55362 = ADVANCED_FACE ( 'NONE', ( #21981 ), #51110, .T. ) ; +#55363 = ADVANCED_FACE ( 'NONE', ( #23951 ), #13988, .T. ) ; +#55364 = CIRCLE ( 'NONE', #11920, 10.00000000000009200 ) ; +#55365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55366 = ORIENTED_EDGE ( 'NONE', *, *, #78624, .F. ) ; +#55367 = CARTESIAN_POINT ( 'NONE', ( -15.27292969368531300, 55.79999999999999000, -28.53959444491376000 ) ) ; +#55368 = ORIENTED_EDGE ( 'NONE', *, *, #78857, .T. ) ; +#55369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55370 = AXIS2_PLACEMENT_3D ( 'NONE', #25236, #68740, #31496 ) ; +#55371 = AXIS2_PLACEMENT_3D ( 'NONE', #44601, #7372, #50876 ) ; +#55372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55373 = VERTEX_POINT ( 'NONE', #32732 ) ; +#55374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55375 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 53.67681279774444600, -28.70555803803047500 ) ) ; +#55376 = ADVANCED_FACE ( 'NONE', ( #67719 ), #1514, .T. ) ; +#55377 = CONICAL_SURFACE ( 'NONE', #2920, 10.00000000000009200, 0.7853981633974447300 ) ; +#55378 = ORIENTED_EDGE ( 'NONE', *, *, #44110, .T. ) ; +#55379 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42807, #48780, #11835, #55319 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760850289500, 0.0007596411030283568100 ), + .UNSPECIFIED. ) ; +#55380 = FACE_OUTER_BOUND ( 'NONE', #45235, .T. ) ; +#55381 = ORIENTED_EDGE ( 'NONE', *, *, #69533, .F. ) ; +#55382 = ORIENTED_EDGE ( 'NONE', *, *, #189, .F. ) ; +#55383 = CARTESIAN_POINT ( 'NONE', ( 7.714285714286139900, 15.92318720225502000, -28.70555803803025800 ) ) ; +#55384 = ORIENTED_EDGE ( 'NONE', *, *, #56201, .T. ) ; +#55385 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 56.83333333333334300, 9.794441961969999600 ) ) ; +#55386 = FACE_OUTER_BOUND ( 'NONE', #7918, .T. ) ; +#55387 = ORIENTED_EDGE ( 'NONE', *, *, #69311, .F. ) ; +#55388 = EDGE_LOOP ( 'NONE', ( #61424, #41358, #20010, #52585, #80537, #36110, #66051 ) ) ; +#55389 = ORIENTED_EDGE ( 'NONE', *, *, #13198, .F. ) ; +#55390 = EDGE_LOOP ( 'NONE', ( #35918, #80381, #34521 ) ) ; +#55392 = EDGE_LOOP ( 'NONE', ( #75464, #1404, #5948, #31915 ) ) ; +#55391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55393 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 22.00000000000001400, -6.205558038030003100 ) ) ; +#55394 = AXIS2_PLACEMENT_3D ( 'NONE', #75572, #1040, #32077 ) ; +#55395 = EDGE_LOOP ( 'NONE', ( #25535, #78212, #55366, #20281 ) ) ; +#55396 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609195900, 34.41466791010194000, -28.53910738522643300 ) ) ; +#55397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60760, #66998, #42206, #4967 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001492013864175138500 ), + .UNSPECIFIED. ) ; +#55398 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#55399 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55400 = ORIENTED_EDGE ( 'NONE', *, *, #38040, .F. ) ; +#55401 = FACE_OUTER_BOUND ( 'NONE', #69442, .T. ) ; +#55402 = ORIENTED_EDGE ( 'NONE', *, *, #30125, .T. ) ; +#55403 = ORIENTED_EDGE ( 'NONE', *, *, #76322, .T. ) ; +#55404 = EDGE_CURVE ( 'NONE', #56250, #80471, #34638, .T. ) ; +#55405 = ORIENTED_EDGE ( 'NONE', *, *, #21903, .T. ) ; +#55406 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 24.33333333333335000, 8.320721403598817300 ) ) ; +#55407 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26586, #76045, #32796, #76310 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336188111712300E-007, 0.0006649560044138620400 ), + .UNSPECIFIED. ) ; +#55408 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484570300, 71.01872124563918500, -28.53757464917570300 ) ) ; +#55409 = ORIENTED_EDGE ( 'NONE', *, *, #39087, .T. ) ; +#55410 = ORIENTED_EDGE ( 'NONE', *, *, #19056, .T. ) ; +#55411 = AXIS2_PLACEMENT_3D ( 'NONE', #45620, #8367, #51879 ) ; +#55412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55413 = CONICAL_SURFACE ( 'NONE', #17694, 10.00000000000009200, 0.7853981633974447300 ) ; +#55414 = ORIENTED_EDGE ( 'NONE', *, *, #47327, .F. ) ; +#55415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55416 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819243100, 69.94924284854681700, -28.20555803803005900 ) ) ; +#55417 = CARTESIAN_POINT ( 'NONE', ( 15.85159581709385400, 89.93589406417429200, -28.68054222049876100 ) ) ; +#55418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79512, #35992, #73258, #42203 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01103343117100362800, 0.01117762389919580200 ), + .UNSPECIFIED. ) ; +#55420 = EDGE_LOOP ( 'NONE', ( #50006, #33153, #76997, #9259 ) ) ; +#55419 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55421 = CARTESIAN_POINT ( 'NONE', ( -9.813460021729275300, 6.877501000800537900, -28.20555803802992800 ) ) ; +#55422 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#55423 = AXIS2_PLACEMENT_3D ( 'NONE', #30551, #74056, #36758 ) ; +#55424 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811158400, 67.05460903980839800, -28.69802137271993900 ) ) ; +#55425 = CIRCLE ( 'NONE', #53025, 10.50000000000009600 ) ; +#55426 = ORIENTED_EDGE ( 'NONE', *, *, #17238, .F. ) ; +#55427 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#55428 = ORIENTED_EDGE ( 'NONE', *, *, #69260, .T. ) ; +#55429 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 30.57757630314203800, -28.53861367218592100 ) ) ; +#55430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55431 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708534600, 85.79999999999998300, -28.63843632546336000 ) ) ; +#55432 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050734900, 17.57379779496201500, -28.70555803803025800 ) ) ; +#55433 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 20.24660241562181900, -28.20555803802994200 ) ) ; +#55434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#55435 = ADVANCED_FACE ( 'NONE', ( #9310 ), #32668, .F. ) ; +#55436 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 31.12753447840887200, -28.38801640354855500 ) ) ; +#55437 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051545500, 70.58127875436046800, -28.53757464917574200 ) ) ; +#55438 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#55439 = EDGE_CURVE ( 'NONE', #33166, #56108, #51545, .T. ) ; +#55440 = CONICAL_SURFACE ( 'NONE', #22271, 10.50000000000009800, 0.7853981633974500600 ) ; +#55441 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 27.83333333333336100, -3.349151577478984600 ) ) ; +#55442 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 90.34267608797601700, -28.20555803803030800 ) ) ; +#55443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55444 = EDGE_CURVE ( 'NONE', #27705, #5460, #37094, .T. ) ; +#55445 = FACE_OUTER_BOUND ( 'NONE', #55581, .T. ) ; +#55446 = ORIENTED_EDGE ( 'NONE', *, *, #57018, .T. ) ; +#55447 = ADVANCED_FACE ( 'NONE', ( #53102 ), #27041, .T. ) ; +#55448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55450 = ORIENTED_EDGE ( 'NONE', *, *, #50446, .T. ) ; +#55449 = CARTESIAN_POINT ( 'NONE', ( 16.68942240455935900, 84.52391587796564900, -28.56336785413105200 ) ) ; +#55451 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 87.94142842854310500, -28.20555803802997700 ) ) ; +#55452 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844490800, 75.79999999999982700, -28.20555803803014400 ) ) ; +#55453 = EDGE_CURVE ( 'NONE', #62355, #69111, #65785, .T. ) ; +#55454 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46848, #53123, #15873, #59400 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002139977954367058000, 0.002490143138875294300 ), + .UNSPECIFIED. ) ; +#55455 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55456 = FACE_OUTER_BOUND ( 'NONE', #8733, .T. ) ; +#55457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55458 = ORIENTED_EDGE ( 'NONE', *, *, #78697, .F. ) ; +#55459 = FACE_OUTER_BOUND ( 'NONE', #32405, .T. ) ; +#55460 = ORIENTED_EDGE ( 'NONE', *, *, #72823, .F. ) ; +#55461 = CARTESIAN_POINT ( 'NONE', ( -16.88106447389086600, 90.49763722318499500, -28.32100408376067700 ) ) ; +#55462 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55463 = EDGE_CURVE ( 'NONE', #31156, #78197, #49183, .T. ) ; +#55464 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819073900, 51.65075715145259500, -28.20555803803014100 ) ) ; +#55465 = EDGE_CURVE ( 'NONE', #79252, #24508, #18075, .T. ) ; +#55466 = ADVANCED_FACE ( 'NONE', ( #3460 ), #14186, .F. ) ; +#55467 = CONICAL_SURFACE ( 'NONE', #35039, 10.50000000000009600, 0.7853981633974518300 ) ; +#55468 = VERTEX_POINT ( 'NONE', #15044 ) ; +#55469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55470 = ORIENTED_EDGE ( 'NONE', *, *, #66936, .T. ) ; +#55471 = ORIENTED_EDGE ( 'NONE', *, *, #25494, .F. ) ; +#55472 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 20.44069092601377900, -28.35186440610857200 ) ) ; +#55473 = VERTEX_POINT ( 'NONE', #64848 ) ; +#55474 = VERTEX_POINT ( 'NONE', #27576 ) ; +#55475 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#55476 = EDGE_LOOP ( 'NONE', ( #1153, #52685, #9572, #43116 ) ) ; +#55477 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55478 = EDGE_CURVE ( 'NONE', #65169, #77798, #47229, .T. ) ; +#55479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55480 = EDGE_CURVE ( 'NONE', #27266, #47599, #22678, .T. ) ; +#55481 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#55482 = EDGE_CURVE ( 'NONE', #59892, #40326, #8171, .T. ) ; +#55483 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274641600, 77.93535825203929300, -28.53896444442226600 ) ) ; +#55484 = ADVANCED_FACE ( 'NONE', ( #16130 ), #45264, .T. ) ; +#55485 = LINE ( 'NONE', #77495, #16565 ) ; +#55486 = AXIS2_PLACEMENT_3D ( 'NONE', #50089, #56370, #6602 ) ; +#55487 = ORIENTED_EDGE ( 'NONE', *, *, #7642, .T. ) ; +#55488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55489 = ORIENTED_EDGE ( 'NONE', *, *, #74207, .T. ) ; +#55490 = ORIENTED_EDGE ( 'NONE', *, *, #69677, .F. ) ; +#55491 = ORIENTED_EDGE ( 'NONE', *, *, #31803, .F. ) ; +#55492 = EDGE_LOOP ( 'NONE', ( #40288, #3719, #39152 ) ) ; +#55493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55494 = CONICAL_SURFACE ( 'NONE', #64507, 10.50000000000009600, 0.7853981633974500600 ) ; +#55495 = ADVANCED_FACE ( 'NONE', ( #63830 ), #12234, .F. ) ; +#55496 = AXIS2_PLACEMENT_3D ( 'NONE', #34349, #77855, #40578 ) ; +#55497 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, -3.666666666666665200, 1.294441961969997200 ) ) ; +#55498 = AXIS2_PLACEMENT_3D ( 'NONE', #26113, #44524, #19842 ) ; +#55499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29472, #66692, #41927, #4662 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750786076128000E-007, 0.0007677775503743750700 ), + .UNSPECIFIED. ) ; +#55500 = EDGE_LOOP ( 'NONE', ( #37675, #27831, #68206, #5110 ) ) ; +#55501 = AXIS2_PLACEMENT_3D ( 'NONE', #13937, #69933, #32681 ) ; +#55502 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944366000, 49.30044153222986100, -28.38339015421985700 ) ) ; +#55503 = ORIENTED_EDGE ( 'NONE', *, *, #75692, .F. ) ; +#55504 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 36.50000000000001400, 4.650848422521016300 ) ) ; +#55505 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199000, 51.25732391202399200, -28.20555803802997700 ) ) ; +#55506 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#55507 = CIRCLE ( 'NONE', #70185, 10.50000000000009200 ) ; +#55508 = EDGE_LOOP ( 'NONE', ( #65697, #36976, #37582 ) ) ; +#55509 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 9.932503002402294000, -28.20555803802994200 ) ) ; +#55510 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 1.666666666666677400, -8.133761268305512700 ) ) ; +#55511 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2864, #40133, #52628, #15398 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647744716600E-007, 0.0007596411030280956300 ), + .UNSPECIFIED. ) ; +#55512 = EDGE_LOOP ( 'NONE', ( #40993, #1471, #27480, #19958, #77115 ) ) ; +#55513 = CARTESIAN_POINT ( 'NONE', ( 9.695954216608885900, 80.13716795162622500, -28.48697406221719300 ) ) ; +#55514 = AXIS2_PLACEMENT_3D ( 'NONE', #31182, #74691, #37384 ) ; +#55515 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155229900, 55.80000000000015300, -28.20555803803030800 ) ) ; +#55516 = EDGE_CURVE ( 'NONE', #4804, #39079, #28821, .T. ) ; +#55517 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044300, 62.51973550835661100, -28.70555803802997400 ) ) ; +#55518 = CARTESIAN_POINT ( 'NONE', ( 4.561944296568905900, 18.11613305479818300, -28.57723854182904300 ) ) ; +#55519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55520 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195939300, 47.44142842854297000, -28.37229765499281000 ) ) ; +#55521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55523 = VECTOR ( 'NONE', #9902, 1000.000000000000000 ) ; +#55524 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55525 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#55526 = EDGE_CURVE ( 'NONE', #7991, #55203, #61880, .T. ) ; +#55527 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009100, 15.94142842854307000, -28.20555803802992800 ) ) ; +#55528 = ORIENTED_EDGE ( 'NONE', *, *, #69534, .F. ) ; +#55529 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55530 = ORIENTED_EDGE ( 'NONE', *, *, #37371, .F. ) ; +#55531 = AXIS2_PLACEMENT_3D ( 'NONE', #12069, #24314, #49284 ) ; +#55532 = CARTESIAN_POINT ( 'NONE', ( -2.813460021729408600, 6.877501000801044200, -28.20555803803009500 ) ) ; +#55533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55534 = ORIENTED_EDGE ( 'NONE', *, *, #63505, .F. ) ; +#55535 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109115800, 80.49763722318498100, -28.32100408376067000 ) ) ; +#55536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55537 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609170600, 80.13716795162640900, -28.48697406221692000 ) ) ; +#55538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55539 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#55540 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73885, #61644, #74154, #36845 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884697800 ), + .UNSPECIFIED. ) ; +#55541 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#55542 = CIRCLE ( 'NONE', #67995, 10.00000000000009200 ) ; +#55543 = ORIENTED_EDGE ( 'NONE', *, *, #58579, .F. ) ; +#55544 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#55545 = AXIS2_PLACEMENT_3D ( 'NONE', #21056, #45746, #77063 ) ; +#55546 = ORIENTED_EDGE ( 'NONE', *, *, #48632, .F. ) ; +#55547 = CARTESIAN_POINT ( 'NONE', ( 4.801413064970932800, 94.72249899919830800, -28.20555803803030800 ) ) ; +#55548 = EDGE_LOOP ( 'NONE', ( #4596, #23903, #23842 ) ) ; +#55549 = CONICAL_SURFACE ( 'NONE', #22982, 10.00000000000009200, 0.7853981633974447300 ) ; +#55550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55551 = ORIENTED_EDGE ( 'NONE', *, *, #37121, .F. ) ; +#55552 = VERTEX_POINT ( 'NONE', #15583 ) ; +#55553 = ORIENTED_EDGE ( 'NONE', *, *, #48709, .F. ) ; +#55554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55555 = ORIENTED_EDGE ( 'NONE', *, *, #9982, .F. ) ; +#55556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55558 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#55559 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36324, #79866, #55087, #17848 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527041627800E-007, 0.0007303749718167598700 ), + .UNSPECIFIED. ) ; +#55560 = ORIENTED_EDGE ( 'NONE', *, *, #24799, .T. ) ; +#55561 = FACE_OUTER_BOUND ( 'NONE', #33647, .T. ) ; +#55562 = EDGE_CURVE ( 'NONE', #59592, #34797, #30736, .T. ) ; +#55563 = ORIENTED_EDGE ( 'NONE', *, *, #34631, .F. ) ; +#55564 = ORIENTED_EDGE ( 'NONE', *, *, #45645, .F. ) ; +#55565 = ADVANCED_FACE ( 'NONE', ( #80355 ), #10278, .T. ) ; +#55566 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120823100, 30.71901109451850300, -28.33427604305564500 ) ) ; +#55567 = EDGE_LOOP ( 'NONE', ( #30642, #24721, #41019, #37503 ) ) ; +#55568 = EDGE_LOOP ( 'NONE', ( #22086, #60406, #71818, #51988 ) ) ; +#55569 = ORIENTED_EDGE ( 'NONE', *, *, #42365, .F. ) ; +#55570 = ORIENTED_EDGE ( 'NONE', *, *, #5789, .F. ) ; +#55571 = ADVANCED_FACE ( 'NONE', ( #43342 ), #57958, .F. ) ; +#55572 = CIRCLE ( 'NONE', #25883, 10.00000000000009200 ) ; +#55573 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 42.50000000000001400, -7.061964498581016200 ) ) ; +#55574 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#55575 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#55576 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#55577 = ADVANCED_FACE ( 'NONE', ( #26826 ), #24871, .T. ) ; +#55578 = EDGE_CURVE ( 'NONE', #893, #73926, #74529, .T. ) ; +#55579 = CONICAL_SURFACE ( 'NONE', #3946, 10.50000000000009600, 0.7853981633974500600 ) ; +#55581 = EDGE_LOOP ( 'NONE', ( #72118, #4363, #48211, #79859 ) ) ; +#55580 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.36203212531319200, -28.38801640354855800 ) ) ; +#55582 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72319, #28818, #22524, #35052 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005926994792800E-007, 0.0004431156063178419100 ), + .UNSPECIFIED. ) ; +#55583 = AXIS2_PLACEMENT_3D ( 'NONE', #64143, #70346, #20603 ) ; +#55584 = EDGE_CURVE ( 'NONE', #65390, #47050, #41398, .T. ) ; +#55585 = EDGE_CURVE ( 'NONE', #38041, #59880, #59930, .T. ) ; +#55586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55587 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#55588 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 13.83333333333334800, 1.741883078712340300 ) ) ; +#55589 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55590 = EDGE_CURVE ( 'NONE', #66057, #69111, #78426, .T. ) ; +#55591 = AXIS2_PLACEMENT_3D ( 'NONE', #7603, #51095, #13901 ) ; +#55592 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55593 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807186800, 54.80000000000003300, -28.70555803802997700 ) ) ; +#55594 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 75.67652461702000700, -28.70555803802997700 ) ) ; +#55595 = ORIENTED_EDGE ( 'NONE', *, *, #45803, .F. ) ; +#55596 = VERTEX_POINT ( 'NONE', #3854 ) ; +#55597 = CARTESIAN_POINT ( 'NONE', ( -3.935438998026759400, 61.50961459723746600, -28.29483879644642000 ) ) ; +#55598 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492470100, 42.02620220503759200, -28.70555803802996700 ) ) ; +#55599 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 90.16054007504462200, -28.34042301926884400 ) ) ; +#55600 = ORIENTED_EDGE ( 'NONE', *, *, #63107, .T. ) ; +#55601 = AXIS2_PLACEMENT_3D ( 'NONE', #76688, #70432, #27222 ) ; +#55602 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55603 = AXIS2_PLACEMENT_3D ( 'NONE', #49533, #6067, #37049 ) ; +#55604 = EDGE_CURVE ( 'NONE', #69612, #35510, #60086, .T. ) ; +#55605 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 45.33333333333334300, -5.205558038030015500 ) ) ; +#55606 = CYLINDRICAL_SURFACE ( 'NONE', #22610, 10.00000000000000000 ) ; +#55607 = ORIENTED_EDGE ( 'NONE', *, *, #47903, .T. ) ; +#55608 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844502500, 55.80000000000000400, -28.20555803802997700 ) ) ; +#55609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55610 = ORIENTED_EDGE ( 'NONE', *, *, #53455, .T. ) ; +#55611 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 48.33333333333333600, 1.294441961969997200 ) ) ; +#55612 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#55613 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 31.17701665379186000, -28.20555803802995200 ) ) ; +#55614 = CIRCLE ( 'NONE', #73500, 9.500000000000101300 ) ; +#55615 = ORIENTED_EDGE ( 'NONE', *, *, #17896, .T. ) ; +#55616 = ORIENTED_EDGE ( 'NONE', *, *, #1141, .T. ) ; +#55617 = EDGE_LOOP ( 'NONE', ( #2019, #7675, #72014, #21772 ) ) ; +#55618 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651225500, 61.99560977511662700, -28.70555803803014400 ) ) ; +#55619 = PLANE ( 'NONE', #2737 ) ; +#55620 = EDGE_CURVE ( 'NONE', #47225, #60356, #45548, .T. ) ; +#55621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55622 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55623 = ORIENTED_EDGE ( 'NONE', *, *, #63489, .F. ) ; +#55624 = ORIENTED_EDGE ( 'NONE', *, *, #16420, .T. ) ; +#55625 = AXIS2_PLACEMENT_3D ( 'NONE', #18291, #61829, #24550 ) ; +#55626 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999994000, 20.96823913367206400, -28.70555803802995200 ) ) ; +#55627 = CIRCLE ( 'NONE', #10376, 10.00000000000009400 ) ; +#55628 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55629 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80698, #68454, #6432, #49913 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.255140518769849200E-017, 0.001333132141655299400 ), + .UNSPECIFIED. ) ; +#55630 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252732000, 18.13131911501820400, -28.51286550264586600 ) ) ; +#55631 = CARTESIAN_POINT ( 'NONE', ( -5.216693534804147000, 70.79999999999998300, -28.32841359973437500 ) ) ; +#55632 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609429500, 71.46283204837338600, -28.48697406221667100 ) ) ; +#55633 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#55634 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55635 = CONICAL_SURFACE ( 'NONE', #45180, 10.00000000000009200, 0.7853981633974447300 ) ; +#55636 = EDGE_LOOP ( 'NONE', ( #16602, #61139, #71383, #63046 ) ) ; +#55637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55638 = EDGE_LOOP ( 'NONE', ( #72904, #14457, #72224, #55981 ) ) ; +#55639 = AXIS2_PLACEMENT_3D ( 'NONE', #27367, #70837, #33589 ) ; +#55640 = ORIENTED_EDGE ( 'NONE', *, *, #15812, .F. ) ; +#55641 = ORIENTED_EDGE ( 'NONE', *, *, #15669, .F. ) ; +#55642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55643 = ORIENTED_EDGE ( 'NONE', *, *, #54064, .T. ) ; +#55644 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 60.79999999999998300, -28.55171188418376700 ) ) ; +#55645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#55646 = LINE ( 'NONE', #28154, #39080 ) ; +#55647 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 55.92347538297997300, -28.70555803802997700 ) ) ; +#55648 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#55649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55650 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743465300, 47.43535825203925800, -28.53896444442200000 ) ) ; +#55651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55652 = ADVANCED_FACE ( 'NONE', ( #8290 ), #6361, .T. ) ; +#55653 = AXIS2_PLACEMENT_3D ( 'NONE', #11652, #55137, #17894 ) ; +#55654 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 51.62753447840886200, -28.38801640354855800 ) ) ; +#55655 = FACE_OUTER_BOUND ( 'NONE', #17252, .T. ) ; +#55656 = ORIENTED_EDGE ( 'NONE', *, *, #71808, .T. ) ; +#55657 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 54.66666666666667100, -10.73183747965883100 ) ) ; +#55658 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ; +#55659 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55660 = ADVANCED_FACE ( 'NONE', ( #39449 ), #54044, .F. ) ; +#55661 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 19.83333333333334300, 3.794441961969996900 ) ) ; +#55662 = AXIS2_PLACEMENT_3D ( 'NONE', #71531, #34269, #77773 ) ; +#55663 = CARTESIAN_POINT ( 'NONE', ( 4.344797651230964100, 29.28860447109612900, -28.53900456328625500 ) ) ; +#55664 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55666 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747181000, 18.13131911501876200, -28.51286550264506300 ) ) ; +#55667 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 22.16666666666667500, -12.20555803803000000 ) ) ; +#55668 = ORIENTED_EDGE ( 'NONE', *, *, #34051, .F. ) ; +#55669 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75865, #26395, #69869, #32616 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539341200, 0.0009765394310397412400 ), + .UNSPECIFIED. ) ; +#55670 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007460200, 10.78032162676646500, -28.55467576047001500 ) ) ; +#55671 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#55672 = VERTEX_POINT ( 'NONE', #60465 ) ; +#55673 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55674 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 71.25732391202359400, -28.20555803803030800 ) ) ; +#55675 = ADVANCED_FACE ( 'NONE', ( #55994 ), #20988, .T. ) ; +#55676 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857191200, 80.07141756547869700, -28.70555803803030800 ) ) ; +#55677 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 20.24660241562182300, -28.20555803802994200 ) ) ; +#55678 = CIRCLE ( 'NONE', #18903, 10.00000000000009200 ) ; +#55679 = EDGE_LOOP ( 'NONE', ( #67004, #71573, #33632 ) ) ; +#55680 = FACE_OUTER_BOUND ( 'NONE', #19361, .T. ) ; +#55681 = ORIENTED_EDGE ( 'NONE', *, *, #56543, .F. ) ; +#55682 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528190400, 39.13131911501876200, -28.51286550264508800 ) ) ; +#55683 = EDGE_CURVE ( 'NONE', #20598, #167, #37477, .T. ) ; +#55684 = LINE ( 'NONE', #29342, #60563 ) ; +#55685 = EDGE_CURVE ( 'NONE', #75104, #79251, #31157, .T. ) ; +#55686 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#55687 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .T. ) ; +#55688 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#55689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55690 = ORIENTED_EDGE ( 'NONE', *, *, #41758, .F. ) ; +#55691 = VERTEX_POINT ( 'NONE', #29737 ) ; +#55692 = ORIENTED_EDGE ( 'NONE', *, *, #20899, .T. ) ; +#55693 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#55694 = CIRCLE ( 'NONE', #33241, 10.00000000000009400 ) ; +#55695 = EDGE_CURVE ( 'NONE', #45282, #69758, #72579, .T. ) ; +#55696 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 31.11077422949656700, -28.37255355648633400 ) ) ; +#55697 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999990100, 70.79999999999967000, -28.20555803803030800 ) ) ; +#55698 = EDGE_CURVE ( 'NONE', #49270, #18262, #16688, .T. ) ; +#55699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55700 = ORIENTED_EDGE ( 'NONE', *, *, #24152, .T. ) ; +#55701 = AXIS2_PLACEMENT_3D ( 'NONE', #43638, #6417, #49893 ) ; +#55702 = FACE_OUTER_BOUND ( 'NONE', #69971, .T. ) ; +#55703 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 25.66666666666667100, 2.794441961969992100 ) ) ; +#55704 = VERTEX_POINT ( 'NONE', #23733 ) ; +#55705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55706 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362704000, 64.03471854269754700, -28.66119098264626800 ) ) ; +#55707 = ORIENTED_EDGE ( 'NONE', *, *, #44367, .T. ) ; +#55708 = ORIENTED_EDGE ( 'NONE', *, *, #32705, .T. ) ; +#55709 = ORIENTED_EDGE ( 'NONE', *, *, #33332, .T. ) ; +#55710 = FACE_OUTER_BOUND ( 'NONE', #55980, .T. ) ; +#55711 = ORIENTED_EDGE ( 'NONE', *, *, #3270, .T. ) ; +#55712 = CONICAL_SURFACE ( 'NONE', #49191, 10.50000000000009600, 0.7853981633974500600 ) ; +#55713 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 65.47903320442301800, -28.36604143581847400 ) ) ; +#55714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55715 = AXIS2_PLACEMENT_3D ( 'NONE', #40867, #47090, #78139 ) ; +#55716 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55718 = EDGE_CURVE ( 'NONE', #55143, #52754, #22919, .T. ) ; +#55719 = EDGE_CURVE ( 'NONE', #54223, #61208, #2193, .T. ) ; +#55720 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 11.93454006867179600, -28.70555803802997700 ) ) ; +#55721 = EDGE_CURVE ( 'NONE', #62964, #30415, #5436, .T. ) ; +#55722 = VERTEX_POINT ( 'NONE', #17738 ) ; +#55723 = AXIS2_PLACEMENT_3D ( 'NONE', #34986, #65987, #22456 ) ; +#55724 = ORIENTED_EDGE ( 'NONE', *, *, #44839, .F. ) ; +#55725 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55726 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 38.97246552159109700, -28.38801640354855800 ) ) ; +#55727 = AXIS2_PLACEMENT_3D ( 'NONE', #48545, #73617, #79878 ) ; +#55728 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819191100, 59.94924284854719300, -28.20555803802997700 ) ) ; +#55729 = CIRCLE ( 'NONE', #17436, 10.00000000000009200 ) ; +#55730 = VERTEX_POINT ( 'NONE', #61271 ) ; +#55731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21766, #34268, #53006, #15772 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.350664344060663200E-016, 0.001246264537623636300 ), + .UNSPECIFIED. ) ; +#55732 = CONICAL_SURFACE ( 'NONE', #14433, 10.00000000000009200, 0.7853981633974415100 ) ; +#55733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55734 = AXIS2_PLACEMENT_3D ( 'NONE', #14288, #57796, #20548 ) ; +#55735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43917, #12699, #50166, #12959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.046025310236324200E-016, 0.001179148174663059500 ), + .UNSPECIFIED. ) ; +#55736 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#55737 = EDGE_CURVE ( 'NONE', #80412, #16374, #68544, .T. ) ; +#55738 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894330600, 14.04999999999997600, -28.70555803802992800 ) ) ; +#55739 = AXIS2_PLACEMENT_3D ( 'NONE', #63584, #991, #26331 ) ; +#55740 = AXIS2_PLACEMENT_3D ( 'NONE', #52534, #21830, #34347 ) ; +#55741 = CARTESIAN_POINT ( 'NONE', ( -3.221259145455643000, 28.66476764525110700, -28.30311733712046200 ) ) ; +#55742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55743 = ADVANCED_FACE ( 'NONE', ( #74515 ), #2442, .F. ) ; +#55744 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34728, #72265, #10238, #53734 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671528707000E-007, 0.0007670610367941475700 ), + .UNSPECIFIED. ) ; +#55745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55746 = EDGE_LOOP ( 'NONE', ( #57917, #54146, #15904 ) ) ; +#55747 = AXIS2_PLACEMENT_3D ( 'NONE', #51629, #58724, #71242 ) ; +#55748 = VERTEX_POINT ( 'NONE', #61540 ) ; +#55749 = ADVANCED_FACE ( 'NONE', ( #66711 ), #50108, .T. ) ; +#55750 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 69.33333333333334300, -3.705558038030004400 ) ) ; +#55751 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76682, #2148, #8400, #51899 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936601600, 0.0005776948474817080900 ), + .UNSPECIFIED. ) ; +#55752 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 90.80000000000001100, -28.45034744217088700 ) ) ; +#55753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55754 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 34.33333333333334300, -5.205558038030008400 ) ) ; +#55755 = CONICAL_SURFACE ( 'NONE', #50083, 10.00000000000009200, 0.7853981633974447300 ) ; +#55756 = AXIS2_PLACEMENT_3D ( 'NONE', #9795, #53296, #16041 ) ; +#55757 = ORIENTED_EDGE ( 'NONE', *, *, #25585, .F. ) ; +#55758 = CARTESIAN_POINT ( 'NONE', ( -5.727308459283261000, 65.79999999999999700, -28.53979898350160100 ) ) ; +#55759 = FACE_OUTER_BOUND ( 'NONE', #43420, .T. ) ; +#55760 = CARTESIAN_POINT ( 'NONE', ( -17.38231690878858500, 17.89503779644463000, -28.41840204704135400 ) ) ; +#55761 = ORIENTED_EDGE ( 'NONE', *, *, #47581, .T. ) ; +#55762 = ADVANCED_FACE ( 'NONE', ( #52063 ), #17077, .T. ) ; +#55763 = DIRECTION ( 'NONE', ( 2.523234146875355000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55765 = ADVANCED_FACE ( 'NONE', ( #68651 ), #12011, .T. ) ; +#55766 = ORIENTED_EDGE ( 'NONE', *, *, #27609, .T. ) ; +#55767 = FACE_OUTER_BOUND ( 'NONE', #13139, .T. ) ; +#55768 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, -0.4999999999999728000, 4.650848422521016300 ) ) ; +#55769 = ORIENTED_EDGE ( 'NONE', *, *, #22701, .F. ) ; +#55770 = VERTEX_POINT ( 'NONE', #30786 ) ; +#55771 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55773 = AXIS2_PLACEMENT_3D ( 'NONE', #51021, #63868, #1799 ) ; +#55774 = CIRCLE ( 'NONE', #37861, 10.00000000000009400 ) ; +#55775 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31383, #25114, #43574, #74889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388543157600E-007, 0.0007987676590766499500 ), + .UNSPECIFIED. ) ; +#55776 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#55777 = CARTESIAN_POINT ( 'NONE', ( 9.710924119904683800, 7.615022776544383200, -28.44796972294024300 ) ) ; +#55778 = ADVANCED_FACE ( 'NONE', ( #33605 ), #48163, .T. ) ; +#55779 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55780 = EDGE_CURVE ( 'NONE', #58433, #75158, #64782, .T. ) ; +#55781 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655937400, 17.92298334620740600, -28.20555803802993500 ) ) ; +#55782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55783 = ORIENTED_EDGE ( 'NONE', *, *, #76300, .T. ) ; +#55784 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#55785 = FACE_OUTER_BOUND ( 'NONE', #22968, .T. ) ; +#55786 = AXIS2_PLACEMENT_3D ( 'NONE', #45114, #63960, #51372 ) ; +#55787 = ORIENTED_EDGE ( 'NONE', *, *, #69629, .T. ) ; +#55788 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55789 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 57.94142842854304100, -28.20555803802997700 ) ) ; +#55790 = ORIENTED_EDGE ( 'NONE', *, *, #55884, .F. ) ; +#55791 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55793 = EDGE_LOOP ( 'NONE', ( #13961, #68727, #63636 ) ) ; +#55794 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#55795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55796 = ORIENTED_EDGE ( 'NONE', *, *, #1375, .T. ) ; +#55797 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#55798 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853339700, 10.29130857014959200, -28.37223374938508500 ) ) ; +#55799 = FACE_OUTER_BOUND ( 'NONE', #1755, .T. ) ; +#55800 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55801 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455787400, 60.07527064970111800, -28.39317435246148600 ) ) ; +#55802 = PLANE ( 'NONE', #21373 ) ; +#55803 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195927700, 36.94142842854297000, -28.37229765499279600 ) ) ; +#55804 = ORIENTED_EDGE ( 'NONE', *, *, #23301, .F. ) ; +#55805 = EDGE_CURVE ( 'NONE', #8588, #49126, #54061, .T. ) ; +#55806 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#55807 = VERTEX_POINT ( 'NONE', #55517 ) ; +#55808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55809 = FACE_OUTER_BOUND ( 'NONE', #18115, .T. ) ; +#55810 = EDGE_CURVE ( 'NONE', #78314, #36182, #18998, .T. ) ; +#55811 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#55812 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#55813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55815 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#55816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55817 = EDGE_CURVE ( 'NONE', #43908, #4799, #4411, .T. ) ; +#55818 = EDGE_CURVE ( 'NONE', #49730, #23882, #39599, .T. ) ; +#55819 = AXIS2_PLACEMENT_3D ( 'NONE', #44802, #7567, #51067 ) ; +#55820 = FACE_OUTER_BOUND ( 'NONE', #8885, .T. ) ; +#55821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55822 = ORIENTED_EDGE ( 'NONE', *, *, #26874, .F. ) ; +#55823 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 40.33333333333334300, 5.722645192245503900 ) ) ; +#55824 = AXIS2_PLACEMENT_3D ( 'NONE', #78336, #41061, #3780 ) ; +#55826 = VERTEX_POINT ( 'NONE', #43781 ) ; +#55825 = EDGE_CURVE ( 'NONE', #61214, #60669, #25151, .T. ) ; +#55827 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 58.39962244433173300, -28.53664883431610400 ) ) ; +#55828 = EDGE_CURVE ( 'NONE', #60076, #64735, #10708, .T. ) ; +#55829 = EDGE_CURVE ( 'NONE', #25126, #60514, #77005, .T. ) ; +#55831 = ORIENTED_EDGE ( 'NONE', *, *, #24862, .T. ) ; +#55830 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019100, 81.43250300240214300, -28.20555803803014400 ) ) ; +#55832 = ADVANCED_FACE ( 'NONE', ( #31664 ), #56585, .T. ) ; +#55833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13464, #1179, #19974, #63501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527016346500E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#55834 = FACE_OUTER_BOUND ( 'NONE', #63220, .T. ) ; +#55835 = ORIENTED_EDGE ( 'NONE', *, *, #40241, .T. ) ; +#55836 = FACE_OUTER_BOUND ( 'NONE', #78195, .T. ) ; +#55837 = ORIENTED_EDGE ( 'NONE', *, *, #34244, .T. ) ; +#55838 = AXIS2_PLACEMENT_3D ( 'NONE', #5986, #49460, #12249 ) ; +#55839 = CIRCLE ( 'NONE', #72020, 9.500000000000097700 ) ; +#55840 = ORIENTED_EDGE ( 'NONE', *, *, #25707, .F. ) ; +#55841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78504, #34984, #47426, #10211 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061614900E-007, 0.001119323292485692100 ), + .UNSPECIFIED. ) ; +#55843 = EDGE_LOOP ( 'NONE', ( #6166, #71007, #68997, #9440 ) ) ; +#55844 = EDGE_CURVE ( 'NONE', #54740, #22705, #35577, .T. ) ; +#55845 = EDGE_LOOP ( 'NONE', ( #14333, #23822, #43065, #26504, #37542, #29755 ) ) ; +#55846 = ADVANCED_FACE ( 'NONE', ( #15107 ), #13181, .F. ) ; +#55847 = AXIS2_PLACEMENT_3D ( 'NONE', #30583, #61594, #67836 ) ; +#55848 = AXIS2_PLACEMENT_3D ( 'NONE', #79617, #11356, #54842 ) ; +#55849 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25176, #62448, #74954, #37652 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646393200, 0.0009605145132142260900 ), + .UNSPECIFIED. ) ; +#55850 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841332300, 90.16349705304836000, -28.30782889147497600 ) ) ; +#55851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55852 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#55853 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#55854 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 11.66666666666668000, -6.705558038030000400 ) ) ; +#55855 = FACE_OUTER_BOUND ( 'NONE', #32108, .T. ) ; +#55856 = EDGE_LOOP ( 'NONE', ( #8445, #62524, #46538, #11500 ) ) ; +#55857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55858 = CYLINDRICAL_SURFACE ( 'NONE', #42492, 10.00000000000000200 ) ; +#55859 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 61.08083798124328500, -28.45106778992438000 ) ) ; +#55860 = ORIENTED_EDGE ( 'NONE', *, *, #67659, .T. ) ; +#55861 = ADVANCED_FACE ( 'NONE', ( #79359 ), #19605, .T. ) ; +#55863 = ORIENTED_EDGE ( 'NONE', *, *, #34641, .F. ) ; +#55862 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61353, #24078, #80091, #42802 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202225457400E-007, 0.0008724366121404667700 ), + .UNSPECIFIED. ) ; +#55864 = ORIENTED_EDGE ( 'NONE', *, *, #35820, .T. ) ; +#55865 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 59.91070809551060700, -28.20555803802997700 ) ) ; +#55866 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310460400, 28.60230989102909800, -28.61774594594333000 ) ) ; +#55867 = ORIENTED_EDGE ( 'NONE', *, *, #10032, .T. ) ; +#55868 = CONICAL_SURFACE ( 'NONE', #62702, 10.00000000000009200, 0.7853981633974447300 ) ; +#55869 = AXIS2_PLACEMENT_3D ( 'NONE', #23479, #66994, #29763 ) ; +#55870 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63492, #57211, #13724, #69713 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241212000, 0.0005195704752302465500 ), + .UNSPECIFIED. ) ; +#55872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55873 = ADVANCED_FACE ( 'NONE', ( #62819 ), #44253, .T. ) ; +#55874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55875 = ORIENTED_EDGE ( 'NONE', *, *, #74336, .T. ) ; +#55876 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048100, 18.69949493661160400, -28.70555803803025800 ) ) ; +#55877 = VERTEX_POINT ( 'NONE', #44546 ) ; +#55878 = AXIS2_PLACEMENT_3D ( 'NONE', #28245, #65494, #15694 ) ; +#55879 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 83.42856308690586800, -28.36981695106784000 ) ) ; +#55880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55881 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 46.16666666666667100, -2.545304000185620600 ) ) ; +#55882 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 81.65075715145280800, -28.20555803802997700 ) ) ; +#55883 = ORIENTED_EDGE ( 'NONE', *, *, #53337, .F. ) ; +#55884 = EDGE_CURVE ( 'NONE', #69606, #30200, #77390, .T. ) ; +#55885 = CIRCLE ( 'NONE', #51770, 9.500000000000101300 ) ; +#55886 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#55887 = AXIS2_PLACEMENT_3D ( 'NONE', #5015, #49031, #61345 ) ; +#55888 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 57.70389005397394300, -28.37519436813183700 ) ) ; +#55889 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310461500, 9.997690108970880700, -28.61774594594333000 ) ) ; +#55890 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504987300, 20.90771342879323300, -28.53891855579987800 ) ) ; +#55891 = ADVANCED_FACE ( 'NONE', ( #29744 ), #58886, .T. ) ; +#55892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55893 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567223800, 49.85339758437807900, -28.20555803802996700 ) ) ; +#55894 = AXIS2_PLACEMENT_3D ( 'NONE', #57404, #20158, #63685 ) ; +#55895 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.43250300240229200, -28.20555803802997700 ) ) ; +#55896 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471852700, 30.96868088498121800, -28.51286550264511600 ) ) ; +#55897 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 81.43250300240228500, -28.23966044827355000 ) ) ; +#55898 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#55899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55900 = PLANE ( 'NONE', #20418 ) ; +#55901 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000400, 101.5999999999999900, -18.70555803802999200 ) ) ; +#55902 = AXIS2_PLACEMENT_3D ( 'NONE', #455, #720, #69007 ) ; +#55903 = CONICAL_SURFACE ( 'NONE', #56968, 10.00000000000009400, 0.7853981633974447300 ) ; +#55904 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540442900, 72.51973550835660400, -28.70555803802997700 ) ) ; +#55905 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338504600, 20.60677350908860800, -28.30799595738889400 ) ) ; +#55906 = ORIENTED_EDGE ( 'NONE', *, *, #75014, .F. ) ; +#55907 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55908 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328940900, 38.86201280598324100, -28.29447340919134000 ) ) ; +#55910 = ORIENTED_EDGE ( 'NONE', *, *, #73491, .T. ) ; +#55909 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615344500, 90.79999999999950000, -28.55171188418401200 ) ) ; +#55911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55912 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16030, #28323, #15766, #59562, #22287, #65822 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001586792886075440100, 0.003173585772150880200 ), + .UNSPECIFIED. ) ; +#55913 = CONICAL_SURFACE ( 'NONE', #71953, 10.50000000000009600, 0.7853981633974518300 ) ; +#55914 = CIRCLE ( 'NONE', #63294, 10.00000000000009400 ) ; +#55916 = EDGE_CURVE ( 'NONE', #37317, #34137, #62558, .T. ) ; +#55915 = EDGE_LOOP ( 'NONE', ( #36466, #7775, #8389 ) ) ; +#55917 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.43250300240229200, -28.20555803802997700 ) ) ; +#55918 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 52.50000000000001400, 6.847000845227646500 ) ) ; +#55919 = EDGE_CURVE ( 'NONE', #51437, #43121, #75438, .T. ) ; +#55920 = EDGE_LOOP ( 'NONE', ( #67233, #54213, #36051 ) ) ; +#55921 = CONICAL_SURFACE ( 'NONE', #39083, 10.00000000000009200, 0.7853981633974447300 ) ; +#55922 = CIRCLE ( 'NONE', #7463, 10.50000000000009200 ) ; +#55923 = ORIENTED_EDGE ( 'NONE', *, *, #63111, .T. ) ; +#55924 = ORIENTED_EDGE ( 'NONE', *, *, #69653, .T. ) ; +#55925 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 17.66666666666667500, -5.535685056952199400 ) ) ; +#55926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55927 = EDGE_CURVE ( 'NONE', #51529, #29595, #70587, .T. ) ; +#55928 = FACE_OUTER_BOUND ( 'NONE', #20312, .T. ) ; +#55929 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55930 = VERTEX_POINT ( 'NONE', #26426 ) ; +#55931 = EDGE_CURVE ( 'NONE', #54001, #76599, #48054, .T. ) ; +#55932 = CIRCLE ( 'NONE', #38774, 9.500000000000099500 ) ; +#55933 = EDGE_CURVE ( 'NONE', #63706, #35267, #11224, .T. ) ; +#55934 = VERTEX_POINT ( 'NONE', #20412 ) ; +#55935 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 61.62753447840886900, -28.38801640354855800 ) ) ; +#55936 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492465600, 49.07379779496241000, -28.70555803802996700 ) ) ; +#55937 = VERTEX_POINT ( 'NONE', #57654 ) ; +#55938 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 20.00000000000001100, 9.794441961969996100 ) ) ; +#55939 = ORIENTED_EDGE ( 'NONE', *, *, #13709, .F. ) ; +#55940 = ORIENTED_EDGE ( 'NONE', *, *, #70954, .F. ) ; +#55941 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#55942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55943 = ORIENTED_EDGE ( 'NONE', *, *, #63596, .F. ) ; +#55944 = CIRCLE ( 'NONE', #71520, 10.50000000000009600 ) ; +#55945 = ORIENTED_EDGE ( 'NONE', *, *, #18318, .T. ) ; +#55946 = AXIS2_PLACEMENT_3D ( 'NONE', #32924, #63968, #70182 ) ; +#55947 = EDGE_CURVE ( 'NONE', #21619, #36626, #27786, .T. ) ; +#55948 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3828, #41096, #78658, #41363 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006649316450227301100, 0.0009605139212323390800 ), + .UNSPECIFIED. ) ; +#55949 = EDGE_CURVE ( 'NONE', #24894, #75740, #33616, .T. ) ; +#55950 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 11.70037755566824500, -28.53664883431606500 ) ) ; +#55951 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#55952 = EDGE_CURVE ( 'NONE', #66402, #34753, #19158, .T. ) ; +#55953 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#55954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55957 = ORIENTED_EDGE ( 'NONE', *, *, #33334, .T. ) ; +#55958 = AXIS2_PLACEMENT_3D ( 'NONE', #36503, #24296, #55274 ) ; +#55959 = ORIENTED_EDGE ( 'NONE', *, *, #72169, .F. ) ; +#55960 = ADVANCED_FACE ( 'NONE', ( #60872 ), #40384, .F. ) ; +#55961 = FACE_OUTER_BOUND ( 'NONE', #78060, .T. ) ; +#55962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33233, #20730, #39475, #2200 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.067918987441531400E-017, 0.002676326193402430500 ), + .UNSPECIFIED. ) ; +#55963 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#55964 = CARTESIAN_POINT ( 'NONE', ( 3.031778038947872600, 90.28233213024641700, -28.25051428653850700 ) ) ; +#55965 = CARTESIAN_POINT ( 'NONE', ( -10.24297557446558200, 90.16517473503392900, -28.29551658696701500 ) ) ; +#55966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55967 = ADVANCED_FACE ( 'NONE', ( #46217 ), #7278, .F. ) ; +#55968 = AXIS2_PLACEMENT_3D ( 'NONE', #46177, #8908, #52429 ) ; +#55969 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#55970 = AXIS2_PLACEMENT_3D ( 'NONE', #10743, #54230, #16983 ) ; +#55971 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274343100, 47.43535825203925100, -28.53896444442200300 ) ) ; +#55972 = AXIS2_PLACEMENT_3D ( 'NONE', #61415, #36614, #80144 ) ; +#55973 = ADVANCED_FACE ( 'NONE', ( #56947 ), #54979, .F. ) ; +#55974 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55977 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 23.50000000000002100, -7.061964498581016200 ) ) ; +#55978 = FACE_OUTER_BOUND ( 'NONE', #73426, .T. ) ; +#55979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55980 = EDGE_LOOP ( 'NONE', ( #22664, #79139, #9320, #45236 ) ) ; +#55981 = ORIENTED_EDGE ( 'NONE', *, *, #58743, .F. ) ; +#55982 = FACE_OUTER_BOUND ( 'NONE', #19114, .T. ) ; +#55983 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905900, 64.83849307182666200, -28.68631150211663400 ) ) ; +#55984 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 39.35339758437810100, -28.20555803802995200 ) ) ; +#55985 = AXIS2_PLACEMENT_3D ( 'NONE', #46201, #46463, #40234 ) ; +#55986 = CARTESIAN_POINT ( 'NONE', ( 4.512589988548684000, 60.12140959736003500, -28.55996453402201500 ) ) ; +#55987 = EDGE_CURVE ( 'NONE', #11721, #26644, #4694, .T. ) ; +#55988 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995699800, 13.11903418172676800, -28.69431509262337700 ) ) ; +#55989 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 65.67652461702000700, -28.70555803802997700 ) ) ; +#55990 = ORIENTED_EDGE ( 'NONE', *, *, #31185, .F. ) ; +#55991 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37215, #80749, #6492, #49969 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225029928000E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#55992 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55993 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#55994 = FACE_OUTER_BOUND ( 'NONE', #61998, .T. ) ; +#55995 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 71.46283204837325800, -28.48697406221693700 ) ) ; +#55996 = CONICAL_SURFACE ( 'NONE', #22064, 10.50000000000009600, 0.7853981633974500600 ) ; +#55997 = EDGE_LOOP ( 'NONE', ( #28436, #70731, #25694, #42816 ) ) ; +#55998 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752686900, 59.51229806853761100, -28.47147304844863300 ) ) ; +#55999 = EDGE_CURVE ( 'NONE', #57479, #78429, #73496, .T. ) ; +#56000 = ORIENTED_EDGE ( 'NONE', *, *, #23671, .T. ) ; +#56001 = CIRCLE ( 'NONE', #60464, 10.50000000000009600 ) ; +#56002 = CARTESIAN_POINT ( 'NONE', ( -4.230830694656961400, 60.94992009694571100, -28.43638873268705300 ) ) ; +#56003 = AXIS2_PLACEMENT_3D ( 'NONE', #38806, #39081, #26627 ) ; +#56005 = ORIENTED_EDGE ( 'NONE', *, *, #76199, .T. ) ; +#56004 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155509700, 66.13383585008128300, -28.37247596307111800 ) ) ; +#56006 = ORIENTED_EDGE ( 'NONE', *, *, #69677, .T. ) ; +#56007 = CARTESIAN_POINT ( 'NONE', ( 17.90495709205787000, 61.51754275546334600, -28.27504145778831600 ) ) ; +#56008 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#56009 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#56010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56011 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9688, #34723, #28500, #47178 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527065388100E-007, 0.0007303749718167673600 ), + .UNSPECIFIED. ) ; +#56012 = CONICAL_SURFACE ( 'NONE', #28021, 10.50000000000009600, 0.7853981633974518300 ) ; +#56013 = CIRCLE ( 'NONE', #70030, 10.00000000000009200 ) ; +#56014 = ORIENTED_EDGE ( 'NONE', *, *, #72321, .T. ) ; +#56015 = AXIS2_PLACEMENT_3D ( 'NONE', #13301, #19541, #50490 ) ; +#56016 = CARTESIAN_POINT ( 'NONE', ( 9.997978530266408400, 18.28907435382924300, -28.25433648786283000 ) ) ; +#56017 = EDGE_LOOP ( 'NONE', ( #70390, #53792, #73995, #40473 ) ) ; +#56018 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 15.92318720225498100, -28.70555803802992800 ) ) ; +#56019 = VERTEX_POINT ( 'NONE', #21226 ) ; +#56020 = ORIENTED_EDGE ( 'NONE', *, *, #75263, .T. ) ; +#56021 = ORIENTED_EDGE ( 'NONE', *, *, #56647, .T. ) ; +#56022 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844490300, 66.13383585008156700, -28.37247596307075900 ) ) ; +#56023 = ORIENTED_EDGE ( 'NONE', *, *, #3445, .F. ) ; +#56024 = CONICAL_SURFACE ( 'NONE', #21356, 10.50000000000009800, 0.7853981633974518300 ) ; +#56025 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 67.16666666666665700, 0.1341879241256129200 ) ) ; +#56026 = EDGE_LOOP ( 'NONE', ( #17406, #54942, #71426 ) ) ; +#56027 = AXIS2_PLACEMENT_3D ( 'NONE', #46717, #52989, #77751 ) ; +#56028 = EDGE_LOOP ( 'NONE', ( #4047, #43472, #71253 ) ) ; +#56029 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943308600, 14.04999999999997800, -28.70555803802992800 ) ) ; +#56030 = CARTESIAN_POINT ( 'NONE', ( -10.62849472960806600, 81.43250300240228500, -28.25053119339279900 ) ) ; +#56031 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 32.16666666666667900, 0.9380355014189834000 ) ) ; +#56032 = ORIENTED_EDGE ( 'NONE', *, *, #64860, .T. ) ; +#56033 = CONICAL_SURFACE ( 'NONE', #23228, 10.00000000000009600, 0.7853981633974447300 ) ; +#56035 = ORIENTED_EDGE ( 'NONE', *, *, #46613, .F. ) ; +#56034 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#56036 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736720600, 14.05000000000000200, -28.70555803802992800 ) ) ; +#56037 = EDGE_CURVE ( 'NONE', #51297, #6460, #25822, .T. ) ; +#56038 = EDGE_LOOP ( 'NONE', ( #24807, #29630, #68980 ) ) ; +#56039 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#56040 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 57.94142842854304100, -28.20555803802997700 ) ) ; +#56041 = CONICAL_SURFACE ( 'NONE', #11086, 10.50000000000009600, 0.7853981633974500600 ) ; +#56042 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 69.50000000000002800, -9.258116921287651700 ) ) ; +#56043 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49184, #5703, #18219, #61755 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721163100, 0.0008252574424209514700 ), + .UNSPECIFIED. ) ; +#56044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56045 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432849900, 28.85339758437810100, -28.20555803802994200 ) ) ; +#56046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56047 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56048 = ADVANCED_FACE ( 'NONE', ( #9232 ), #69575, .F. ) ; +#56049 = CARTESIAN_POINT ( 'NONE', ( -10.93543899802686200, 71.50961459723760100, -28.29483879644633500 ) ) ; +#56050 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239000, 81.43945992495534400, -28.34042301926881200 ) ) ; +#56051 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56052 = EDGE_CURVE ( 'NONE', #24987, #4221, #71018, .T. ) ; +#56053 = EDGE_CURVE ( 'NONE', #52291, #76471, #56547, .T. ) ; +#56054 = FACE_OUTER_BOUND ( 'NONE', #70796, .T. ) ; +#56055 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#56056 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.54999999999999700, -28.20555803802994200 ) ) ; +#56057 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537499900, 61.39409401757624400, -28.39369363572358300 ) ) ; +#56058 = CONICAL_SURFACE ( 'NONE', #47243, 10.50000000000009600, 0.7853981633974500600 ) ; +#56059 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454045000, 89.08026449164336200, -28.70555803802997700 ) ) ; +#56060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56062 = ORIENTED_EDGE ( 'NONE', *, *, #7316, .F. ) ; +#56063 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56064 = ORIENTED_EDGE ( 'NONE', *, *, #15707, .T. ) ; +#56065 = ADVANCED_FACE ( 'NONE', ( #42328 ), #36476, .T. ) ; +#56066 = CIRCLE ( 'NONE', #12918, 10.00000000000009400 ) ; +#56067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56069 = PLANE ( 'NONE', #14268 ) ; +#56070 = AXIS2_PLACEMENT_3D ( 'NONE', #73510, #79771, #5238 ) ; +#56071 = EDGE_CURVE ( 'NONE', #45369, #31691, #42077, .T. ) ; +#56072 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#56073 = EDGE_CURVE ( 'NONE', #45524, #50291, #23875, .T. ) ; +#56074 = EDGE_LOOP ( 'NONE', ( #57910, #77194, #43996 ) ) ; +#56075 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56076 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 10.02858243452106100, -28.70555803802994200 ) ) ; +#56077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56078 = EDGE_CURVE ( 'NONE', #68993, #8089, #27660, .T. ) ; +#56079 = FACE_OUTER_BOUND ( 'NONE', #12489, .T. ) ; +#56080 = CIRCLE ( 'NONE', #69931, 10.00000000000009400 ) ; +#56081 = EDGE_LOOP ( 'NONE', ( #52165, #53862, #37667 ) ) ; +#56082 = CARTESIAN_POINT ( 'NONE', ( 10.04026895850642700, 41.37561462481245700, -28.30309985153376200 ) ) ; +#56083 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654561000, 61.32559822014179200, -28.29986836858017800 ) ) ; +#56084 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 77.46443389862717800, -28.54207364681943600 ) ) ; +#56085 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56086 = ORIENTED_EDGE ( 'NONE', *, *, #77261, .T. ) ; +#56087 = EDGE_LOOP ( 'NONE', ( #28553, #47408, #9159, #65944 ) ) ; +#56088 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148362300, 13.09761904761934800, -28.70555803802992800 ) ) ; +#56089 = AXIS2_PLACEMENT_3D ( 'NONE', #43097, #74408, #61900 ) ; +#56090 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344343800, 41.67701665379242100, -28.20555803802997400 ) ) ; +#56091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56092 = AXIS2_PLACEMENT_3D ( 'NONE', #9123, #52654, #15415 ) ; +#56093 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56095 = ADVANCED_FACE ( 'NONE', ( #38406 ), #67644, .T. ) ; +#56094 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38015, #50246, #7024, #50501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002240675813183374000, 0.0006556005030030383100 ), + .UNSPECIFIED. ) ; +#56096 = FACE_OUTER_BOUND ( 'NONE', #2551, .T. ) ; +#56097 = EDGE_LOOP ( 'NONE', ( #24482, #21012, #9107 ) ) ; +#56098 = ORIENTED_EDGE ( 'NONE', *, *, #32537, .T. ) ; +#56099 = ORIENTED_EDGE ( 'NONE', *, *, #44302, .F. ) ; +#56100 = ORIENTED_EDGE ( 'NONE', *, *, #5828, .T. ) ; +#56101 = VERTEX_POINT ( 'NONE', #9783 ) ; +#56102 = FACE_OUTER_BOUND ( 'NONE', #14051, .T. ) ; +#56103 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 38.16666666666665000, -9.205558038030003900 ) ) ; +#56104 = FACE_OUTER_BOUND ( 'NONE', #26010, .T. ) ; +#56105 = AXIS2_PLACEMENT_3D ( 'NONE', #75935, #26197, #32423 ) ; +#56106 = ORIENTED_EDGE ( 'NONE', *, *, #26476, .F. ) ; +#56107 = EDGE_CURVE ( 'NONE', #9324, #66575, #19956, .T. ) ; +#56108 = VERTEX_POINT ( 'NONE', #3494 ) ; +#56109 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#56110 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#56111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56112 = CONICAL_SURFACE ( 'NONE', #79470, 10.00000000000009200, 0.7853981633974415100 ) ; +#56113 = ORIENTED_EDGE ( 'NONE', *, *, #42615, .T. ) ; +#56114 = EDGE_CURVE ( 'NONE', #31625, #3936, #13196, .T. ) ; +#56115 = EDGE_LOOP ( 'NONE', ( #7196, #63986, #26854 ) ) ; +#56116 = FACE_OUTER_BOUND ( 'NONE', #79750, .T. ) ; +#56117 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #47766 ), #60328 ) ; +#56118 = AXIS2_PLACEMENT_3D ( 'NONE', #19016, #62557, #25306 ) ; +#56119 = CONICAL_SURFACE ( 'NONE', #67360, 10.50000000000009600, 0.7853981633974482800 ) ; +#56121 = VERTEX_POINT ( 'NONE', #22023 ) ; +#56120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56122 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56123 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 30.85277818615432100, -28.70555803802999200 ) ) ; +#56124 = PLANE ( 'NONE', #41660 ) ; +#56125 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 9.500000000000003600, 6.847000845227641200 ) ) ; +#56126 = AXIS2_PLACEMENT_3D ( 'NONE', #75476, #38176, #935 ) ; +#56127 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56128 = CIRCLE ( 'NONE', #54220, 9.500000000000099500 ) ; +#56129 = VERTEX_POINT ( 'NONE', #16029 ) ; +#56130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56131 = FACE_OUTER_BOUND ( 'NONE', #71579, .T. ) ; +#56132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40441, #71741, #34471, #77984 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153200878460400E-007, 0.0003300514678516607800 ), + .UNSPECIFIED. ) ; +#56133 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528300, 14.05000000000000200, -28.20555803802992800 ) ) ; +#56134 = ORIENTED_EDGE ( 'NONE', *, *, #5313, .F. ) ; +#56135 = LINE ( 'NONE', #42359, #4563 ) ; +#56136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#56137 = AXIS2_PLACEMENT_3D ( 'NONE', #75993, #44665, #1458 ) ; +#56138 = ORIENTED_EDGE ( 'NONE', *, *, #52926, .F. ) ; +#56139 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56140 = ADVANCED_FACE ( 'NONE', ( #21908 ), #18002, .T. ) ; +#56141 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#56142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56143 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188000700, 18.53085164125271300, -28.45573375118225800 ) ) ; +#56144 = CONICAL_SURFACE ( 'NONE', #35844, 10.00000000000009200, 0.7853981633974447300 ) ; +#56145 = CONICAL_SURFACE ( 'NONE', #74611, 10.00000000000009200, 0.7853981633974447300 ) ; +#56146 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 44.00000000000000700, -1.205558038030002800 ) ) ; +#56147 = ORIENTED_EDGE ( 'NONE', *, *, #42179, .F. ) ; +#56148 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894600, 90.46231468379673400, -28.37082013777818900 ) ) ; +#56149 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116458300, 49.70564881207762700, -28.41114655922300300 ) ) ; +#56150 = ORIENTED_EDGE ( 'NONE', *, *, #30577, .F. ) ; +#56151 = ADVANCED_FACE ( 'NONE', ( #51045 ), #65704, .T. ) ; +#56152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56154 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 69.94924284854687400, -28.20555803802997700 ) ) ; +#56155 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000003200, 81.43250300240195800, -28.20555803803030800 ) ) ; +#56156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56157 = FACE_OUTER_BOUND ( 'NONE', #15962, .T. ) ; +#56158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56159 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.982541115402066600E-016 ) ) ; +#56161 = ORIENTED_EDGE ( 'NONE', *, *, #14139, .T. ) ; +#56162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56163 = ORIENTED_EDGE ( 'NONE', *, *, #71955, .T. ) ; +#56164 = ADVANCED_FACE ( 'NONE', ( #3381 ), #78601, .T. ) ; +#56165 = ADVANCED_FACE ( 'NONE', ( #5360 ), #16055, .T. ) ; +#56166 = EDGE_LOOP ( 'NONE', ( #1831, #59493, #77340, #54517 ) ) ; +#56167 = EDGE_LOOP ( 'NONE', ( #62620, #61810, #1595, #36431 ) ) ; +#56168 = EDGE_CURVE ( 'NONE', #1145, #46699, #79511, .T. ) ; +#56169 = VERTEX_POINT ( 'NONE', #66348 ) ; +#56170 = CARTESIAN_POINT ( 'NONE', ( -12.72730845928326800, 55.79999999999999700, -28.53979898350160100 ) ) ; +#56171 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999998200, 77.22261628933269200, -28.70555803802997700 ) ) ; +#56172 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116445800, 9.894351187922351800, -28.41114655922298100 ) ) ; +#56173 = CONICAL_SURFACE ( 'NONE', #15614, 10.50000000000009600, 0.7853981633974500600 ) ; +#56174 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#56175 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#56176 = ORIENTED_EDGE ( 'NONE', *, *, #9960, .F. ) ; +#56177 = EDGE_CURVE ( 'NONE', #34010, #49730, #1430, .T. ) ; +#56178 = EDGE_LOOP ( 'NONE', ( #6919, #15493, #33614 ) ) ; +#56179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56180 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#56182 = ADVANCED_FACE ( 'NONE', ( #53024 ), #47151, .F. ) ; +#56181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24669, #6167, #12435, #55917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#56183 = EDGE_CURVE ( 'NONE', #51373, #59770, #65069, .T. ) ; +#56184 = FACE_OUTER_BOUND ( 'NONE', #29385, .T. ) ; +#56185 = AXIS2_PLACEMENT_3D ( 'NONE', #20168, #51104, #26441 ) ; +#56186 = VERTEX_POINT ( 'NONE', #72867 ) ; +#56187 = ORIENTED_EDGE ( 'NONE', *, *, #48308, .F. ) ; +#56188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56189 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 50.33333333333332900, -6.705558038030005700 ) ) ; +#56190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16525, #53777, #35311, #78822 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.312011859487003500E-016, 0.001179148174663128700 ), + .UNSPECIFIED. ) ; +#56191 = VERTEX_POINT ( 'NONE', #10314 ) ; +#56192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68327, #24827, #43, #43552 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569559694900E-007, 0.0007596410370203575100 ), + .UNSPECIFIED. ) ; +#56193 = FACE_OUTER_BOUND ( 'NONE', #43715, .T. ) ; +#56194 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 15.50000000000000000, 2.454695999814385600 ) ) ; +#56195 = AXIS2_PLACEMENT_3D ( 'NONE', #58315, #21069, #64599 ) ; +#56196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56197 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 41.67701665379225100, -28.20555803802997400 ) ) ; +#56199 = EDGE_LOOP ( 'NONE', ( #38208, #32094, #3627 ) ) ; +#56198 = EDGE_CURVE ( 'NONE', #63365, #33097, #34565, .T. ) ; +#56200 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56201 = EDGE_CURVE ( 'NONE', #6941, #18005, #50532, .T. ) ; +#56202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56203 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20358, #1568, #26635, #70101 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001679852151197471300 ), + .UNSPECIFIED. ) ; +#56204 = AXIS2_PLACEMENT_3D ( 'NONE', #43785, #25340, #56309 ) ; +#56205 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#56206 = FACE_OUTER_BOUND ( 'NONE', #9769, .T. ) ; +#56207 = VERTEX_POINT ( 'NONE', #4581 ) ; +#56208 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 63.43454006867177200, -28.70555803802999500 ) ) ; +#56209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56210 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 17.83333333333333200, -12.20555803803000600 ) ) ; +#56211 = ORIENTED_EDGE ( 'NONE', *, *, #38400, .F. ) ; +#56212 = EDGE_CURVE ( 'NONE', #66558, #32854, #49101, .T. ) ; +#56213 = CIRCLE ( 'NONE', #61321, 10.50000000000009600 ) ; +#56214 = AXIS2_PLACEMENT_3D ( 'NONE', #17396, #4871, #23662 ) ; +#56215 = AXIS2_PLACEMENT_3D ( 'NONE', #2767, #46266, #9021 ) ; +#56216 = ORIENTED_EDGE ( 'NONE', *, *, #49468, .T. ) ; +#56217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56218 = CARTESIAN_POINT ( 'NONE', ( 3.628581783286471700, 80.16749699759772300, -28.25056166218025000 ) ) ; +#56219 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630700, 28.42298334620784000, -28.20555803802994200 ) ) ; +#56220 = CARTESIAN_POINT ( 'NONE', ( -10.93543899802686100, 51.50961459723760100, -28.29483879644633500 ) ) ; +#56221 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 69.77559325427184000, -28.45987523529581900 ) ) ; +#56222 = CARTESIAN_POINT ( 'NONE', ( -11.03592035693672800, 41.59789380924897300, -28.25343951603330700 ) ) ; +#56223 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 9.940690926013795400, -28.35186440610855000 ) ) ; +#56224 = CIRCLE ( 'NONE', #69788, 10.00000000000009200 ) ; +#56225 = VERTEX_POINT ( 'NONE', #42087 ) ; +#56226 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145294300, 81.86801718796586200, -28.34169759783691900 ) ) ; +#56227 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56228 = AXIS2_PLACEMENT_3D ( 'NONE', #18345, #61879, #24606 ) ; +#56229 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 51.35277818615432500, -28.70555803802999500 ) ) ; +#56230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56232 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180760100, 81.65075715145273700, -28.20555803802997700 ) ) ; +#56233 = ORIENTED_EDGE ( 'NONE', *, *, #67643, .F. ) ; +#56234 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59481, #3425, #47192, #9964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852014200, 0.0009376791149930240700 ), + .UNSPECIFIED. ) ; +#56235 = ADVANCED_FACE ( 'NONE', ( #71548 ), #61802, .T. ) ; +#56236 = CONICAL_SURFACE ( 'NONE', #77522, 10.00000000000009400, 0.7853981633974447300 ) ; +#56237 = FILL_AREA_STYLE ('',( #68229 ) ) ; +#56239 = CARTESIAN_POINT ( 'NONE', ( -15.16277716586360000, 9.918611417068200700, -28.70456437345707100 ) ) ; +#56238 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 24.55000000000000100, -28.20555803802994200 ) ) ; +#56240 = CARTESIAN_POINT ( 'NONE', ( -3.243064933257743000, 81.43482203710631500, -28.29548531138976800 ) ) ; +#56241 = FACE_OUTER_BOUND ( 'NONE', #26480, .T. ) ; +#56242 = AXIS2_PLACEMENT_3D ( 'NONE', #27761, #52736, #2971 ) ; +#56243 = VERTEX_POINT ( 'NONE', #29922 ) ; +#56244 = ORIENTED_EDGE ( 'NONE', *, *, #58679, .T. ) ; +#56245 = CARTESIAN_POINT ( 'NONE', ( 10.46481234601706400, 9.406791769321971600, -28.68794773163825000 ) ) ; +#56246 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 21.33333333333334300, 5.722645192245503900 ) ) ; +#56247 = EDGE_LOOP ( 'NONE', ( #9000, #13755, #76957, #22189 ) ) ; +#56248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56249 = VERTEX_POINT ( 'NONE', #36140 ) ; +#56250 = VERTEX_POINT ( 'NONE', #79650 ) ; +#56251 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819196400, 79.94924284854674600, -28.20555803802997700 ) ) ; +#56252 = ADVANCED_FACE ( 'NONE', ( #30664 ), #28743, .T. ) ; +#56253 = PLANE ( 'NONE', #17626 ) ; +#56254 = AXIS2_PLACEMENT_3D ( 'NONE', #35989, #79508, #42201 ) ; +#56255 = ORIENTED_EDGE ( 'NONE', *, *, #5934, .T. ) ; +#56256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56257 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042476300, 38.00972971738994500, -28.70555803802995600 ) ) ; +#56258 = EDGE_CURVE ( 'NONE', #68751, #45559, #36118, .T. ) ; +#56259 = ORIENTED_EDGE ( 'NONE', *, *, #77752, .F. ) ; +#56260 = CIRCLE ( 'NONE', #15204, 10.50000000000009200 ) ; +#56261 = AXIS2_PLACEMENT_3D ( 'NONE', #16351, #10355, #78644 ) ; +#56262 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.79999999999982700, -28.20555803803014400 ) ) ; +#56263 = EDGE_LOOP ( 'NONE', ( #27499, #16725, #35893, #34324 ) ) ; +#56264 = ADVANCED_FACE ( 'NONE', ( #14102 ), #79925, .T. ) ; +#56265 = ORIENTED_EDGE ( 'NONE', *, *, #32789, .F. ) ; +#56266 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 89.28967419478897200, -28.59353418718932400 ) ) ; +#56267 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#56268 = CONICAL_SURFACE ( 'NONE', #9933, 10.50000000000009600, 0.7853981633974500600 ) ; +#56269 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428612900, 31.02858243452103400, -28.70555803802996700 ) ) ; +#56270 = EDGE_LOOP ( 'NONE', ( #37260, #29835, #39229, #10871 ) ) ; +#56271 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428573000, 20.52858243452105600, -28.70555803802995200 ) ) ; +#56272 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627435500, 67.93535825203923700, -28.53896444442202500 ) ) ; +#56273 = ORIENTED_EDGE ( 'NONE', *, *, #24718, .F. ) ; +#56274 = ADVANCED_FACE ( 'NONE', ( #45179 ), #59858, .T. ) ; +#56275 = EDGE_CURVE ( 'NONE', #561, #65351, #21666, .T. ) ; +#56276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56277 = FACE_OUTER_BOUND ( 'NONE', #23331, .T. ) ; +#56279 = ORIENTED_EDGE ( 'NONE', *, *, #75981, .T. ) ; +#56278 = CARTESIAN_POINT ( 'NONE', ( 5.685965509778466000, 14.05000000000012300, -28.37321477197647500 ) ) ; +#56280 = EDGE_CURVE ( 'NONE', #53914, #9168, #78349, .T. ) ; +#56281 = EDGE_LOOP ( 'NONE', ( #71177, #59612, #56100, #67377 ) ) ; +#56282 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56283 = ADVANCED_FACE ( 'NONE', ( #76368 ), #10196, .F. ) ; +#56284 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 65.00000000000000000, -1.205558038030002800 ) ) ; +#56285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56286 = EDGE_CURVE ( 'NONE', #76239, #55309, #7161, .T. ) ; +#56287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56288 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 30.00000000000001800, -1.205558038030005300 ) ) ; +#56289 = EDGE_CURVE ( 'NONE', #78441, #1293, #32584, .T. ) ; +#56290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #818, #44306, #19615, #63139 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004050844146362934000, 0.0007987676590766501700 ), + .UNSPECIFIED. ) ; +#56291 = AXIS2_PLACEMENT_3D ( 'NONE', #60533, #23247, #66773 ) ; +#56292 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.94142842854297000, -28.20555803802995200 ) ) ; +#56293 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849330800, 20.32033471810043300, -28.30868034705248300 ) ) ; +#56294 = CIRCLE ( 'NONE', #14516, 9.500000000000099500 ) ; +#56295 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56296 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 67.33333333333334300, 4.294441961970000500 ) ) ; +#56297 = ORIENTED_EDGE ( 'NONE', *, *, #41615, .T. ) ; +#56298 = VERTEX_POINT ( 'NONE', #44238 ) ; +#56299 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -3.965082230804130200E-016 ) ) ; +#56300 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344325100, 41.67701665379241400, -28.20555803802997400 ) ) ; +#56301 = AXIS2_PLACEMENT_3D ( 'NONE', #24901, #12403, #74675 ) ; +#56302 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20313, #57567, #70064, #32809 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206654125800E-005, 0.001076779618376919000 ), + .UNSPECIFIED. ) ; +#56303 = EDGE_CURVE ( 'NONE', #55309, #39609, #73519, .T. ) ; +#56304 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174632600, 60.16054007504464400, -28.34042301926885100 ) ) ; +#56305 = EDGE_CURVE ( 'NONE', #2754, #62452, #43261, .T. ) ; +#56306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56307 = EDGE_CURVE ( 'NONE', #57210, #15056, #12161, .T. ) ; +#56308 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#56309 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56310 = CYLINDRICAL_SURFACE ( 'NONE', #51380, 10.00000000000000000 ) ; +#56311 = ORIENTED_EDGE ( 'NONE', *, *, #25839, .T. ) ; +#56312 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56313 = CIRCLE ( 'NONE', #31824, 10.00000000000009200 ) ; +#56314 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217475800, 60.16054007504465100, -28.34042301926880800 ) ) ; +#56315 = ORIENTED_EDGE ( 'NONE', *, *, #29800, .T. ) ; +#56316 = ORIENTED_EDGE ( 'NONE', *, *, #49385, .T. ) ; +#56317 = AXIS2_PLACEMENT_3D ( 'NONE', #14006, #57518, #20260 ) ; +#56318 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823704200, 48.69543746431602900, -28.61277292027075300 ) ) ; +#56319 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#56320 = EDGE_LOOP ( 'NONE', ( #74835, #15802, #43742, #37471, #8790 ) ) ; +#56321 = FACE_OUTER_BOUND ( 'NONE', #54753, .T. ) ; +#56322 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390325400, 61.46283204837320100, -28.48697406221674200 ) ) ; +#56323 = VERTEX_POINT ( 'NONE', #38268 ) ; +#56324 = CARTESIAN_POINT ( 'NONE', ( 10.04027359854960500, 49.72437813624630800, -28.30310527599301900 ) ) ; +#56325 = EDGE_LOOP ( 'NONE', ( #1463, #1409, #22850 ) ) ; +#56326 = ORIENTED_EDGE ( 'NONE', *, *, #35580, .T. ) ; +#56327 = ORIENTED_EDGE ( 'NONE', *, *, #78263, .T. ) ; +#56328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56329 = ORIENTED_EDGE ( 'NONE', *, *, #72413, .F. ) ; +#56330 = EDGE_CURVE ( 'NONE', #24894, #73720, #59042, .T. ) ; +#56331 = PLANE ( 'NONE', #17000 ) ; +#56332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56333 = AXIS2_PLACEMENT_3D ( 'NONE', #47245, #10027, #53542 ) ; +#56334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56335 = AXIS2_PLACEMENT_3D ( 'NONE', #24447, #67953, #30708 ) ; +#56336 = EDGE_LOOP ( 'NONE', ( #60707, #53415, #57980, #76314 ) ) ; +#56338 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25526, #56503, #62790, #69020 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192575660300 ), + .UNSPECIFIED. ) ; +#56337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56339 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#56340 = FACE_OUTER_BOUND ( 'NONE', #10174, .T. ) ; +#56341 = ORIENTED_EDGE ( 'NONE', *, *, #10093, .F. ) ; +#56342 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 9.746602415621548900, -28.20555803803025800 ) ) ; +#56343 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387502600, 86.46717019299431700, -28.53914313452786500 ) ) ; +#56344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56345 = ORIENTED_EDGE ( 'NONE', *, *, #57979, .F. ) ; +#56346 = ORIENTED_EDGE ( 'NONE', *, *, #49117, .F. ) ; +#56347 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063431700, 49.50210619075123500, -28.25343951603344500 ) ) ; +#56348 = CIRCLE ( 'NONE', #14576, 10.00000000000009200 ) ; +#56349 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#56350 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56351 = CARTESIAN_POINT ( 'NONE', ( 3.031778038947846400, 60.28233213024646600, -28.25051428653849000 ) ) ; +#56352 = AXIS2_PLACEMENT_3D ( 'NONE', #1815, #45323, #39086 ) ; +#56353 = ORIENTED_EDGE ( 'NONE', *, *, #27882, .T. ) ; +#56354 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459536600, 79.08026449164330500, -28.70555803803006300 ) ) ; +#56355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56356 = ORIENTED_EDGE ( 'NONE', *, *, #19613, .T. ) ; +#56357 = AXIS2_PLACEMENT_3D ( 'NONE', #32672, #76182, #38898 ) ; +#56358 = FACE_OUTER_BOUND ( 'NONE', #50263, .T. ) ; +#56359 = ORIENTED_EDGE ( 'NONE', *, *, #49569, .F. ) ; +#56360 = ADVANCED_FACE ( 'NONE', ( #80281 ), #8202, .F. ) ; +#56361 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769034200, 18.78860447109612900, -28.53900456328624100 ) ) ; +#56362 = ORIENTED_EDGE ( 'NONE', *, *, #8962, .F. ) ; +#56363 = ADVANCED_FACE ( 'NONE', ( #74442 ), #55913, .F. ) ; +#56364 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 36.00000000000002100, 6.794441961969995200 ) ) ; +#56365 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#56366 = AXIS2_PLACEMENT_3D ( 'NONE', #74149, #49074, #36843 ) ; +#56367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56368 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71610, #46820, #65634, #28408 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815611134200E-007, 0.0007763385940576964900 ), + .UNSPECIFIED. ) ; +#56369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56371 = ADVANCED_FACE ( 'NONE', ( #24794 ), #22843, .T. ) ; +#56372 = AXIS2_PLACEMENT_3D ( 'NONE', #16963, #42207, #73261 ) ; +#56373 = CIRCLE ( 'NONE', #62415, 9.500000000000099500 ) ; +#56374 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#56375 = CIRCLE ( 'NONE', #35863, 10.00000000000009200 ) ; +#56376 = ORIENTED_EDGE ( 'NONE', *, *, #79413, .T. ) ; +#56377 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#56378 = ORIENTED_EDGE ( 'NONE', *, *, #5324, .T. ) ; +#56379 = CARTESIAN_POINT ( 'NONE', ( 9.497924978448521600, 90.99854748491378600, -28.70555803802997700 ) ) ; +#56380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56381 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855033600, 15.92318720225479800, -28.70555803802992800 ) ) ; +#56382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56383 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 7.333333333333350800, -10.73183747965883100 ) ) ; +#56384 = CONICAL_SURFACE ( 'NONE', #18553, 10.50000000000009600, 0.7853981633974500600 ) ; +#56385 = ORIENTED_EDGE ( 'NONE', *, *, #56808, .T. ) ; +#56386 = CONICAL_SURFACE ( 'NONE', #15616, 10.50000000000009800, 0.7853981633974500600 ) ; +#56387 = ORIENTED_EDGE ( 'NONE', *, *, #39136, .F. ) ; +#56388 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965600, 28.65930907398619700, -28.35186440610856500 ) ) ; +#56389 = EDGE_LOOP ( 'NONE', ( #77883, #75861, #64031, #21109 ) ) ; +#56390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56391 = EDGE_CURVE ( 'NONE', #4221, #15529, #41334, .T. ) ; +#56392 = FACE_OUTER_BOUND ( 'NONE', #48577, .T. ) ; +#56393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56394 = EDGE_CURVE ( 'NONE', #71659, #12957, #44528, .T. ) ; +#56395 = ORIENTED_EDGE ( 'NONE', *, *, #57161, .F. ) ; +#56396 = EDGE_LOOP ( 'NONE', ( #53710, #30806, #9241 ) ) ; +#56397 = EDGE_LOOP ( 'NONE', ( #18332, #57214, #20084, #34556 ) ) ; +#56398 = ORIENTED_EDGE ( 'NONE', *, *, #28382, .T. ) ; +#56399 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56400 = ORIENTED_EDGE ( 'NONE', *, *, #22212, .F. ) ; +#56401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56402 = PLANE ( 'NONE', #66150 ) ; +#56403 = ORIENTED_EDGE ( 'NONE', *, *, #21158, .F. ) ; +#56404 = ORIENTED_EDGE ( 'NONE', *, *, #22002, .T. ) ; +#56405 = CARTESIAN_POINT ( 'NONE', ( 5.533180123657679400, 65.79999999999968500, -28.37307693585093900 ) ) ; +#56406 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37717, #75013, #50218, #13011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354277768600E-007, 0.0007670609591624482200 ), + .UNSPECIFIED. ) ; +#56407 = EDGE_CURVE ( 'NONE', #49172, #67776, #30164, .T. ) ; +#56408 = CARTESIAN_POINT ( 'NONE', ( -2.892002542654715100, 70.27440177985812400, -28.29986836858019900 ) ) ; +#56409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56410 = EDGE_CURVE ( 'NONE', #48573, #15748, #15659, .T. ) ; +#56411 = EDGE_LOOP ( 'NONE', ( #31609, #9878, #38968, #44961 ) ) ; +#56412 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 9.968680884981219800, -28.51286550264509500 ) ) ; +#56413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56414 = EDGE_CURVE ( 'NONE', #46876, #70193, #57879, .T. ) ; +#56415 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 41.83333333333333600, 0.1341879241256075400 ) ) ; +#56416 = VERTEX_POINT ( 'NONE', #70366 ) ; +#56417 = EDGE_CURVE ( 'NONE', #18844, #76162, #26753, .T. ) ; +#56418 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#56419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56420 = ORIENTED_EDGE ( 'NONE', *, *, #27282, .T. ) ; +#56421 = ORIENTED_EDGE ( 'NONE', *, *, #77547, .T. ) ; +#56422 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21259, #27523, #2710, #46225 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004021513104710893800, 0.0008082646680356936600 ), + .UNSPECIFIED. ) ; +#56423 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#56424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56425 = CONICAL_SURFACE ( 'NONE', #11353, 10.50000000000009600, 0.7853981633974500600 ) ; +#56426 = CARTESIAN_POINT ( 'NONE', ( 24.95124250429653000, 96.57562125214849400, -19.84443304485031600 ) ) ; +#56427 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56428 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 80.79999999999999700, -28.20555803802997700 ) ) ; +#56429 = AXIS2_PLACEMENT_3D ( 'NONE', #23850, #30121, #61111 ) ; +#56430 = EDGE_LOOP ( 'NONE', ( #16923, #36184, #16163, #2246, #60515 ) ) ; +#56431 = CARTESIAN_POINT ( 'NONE', ( -17.70813552120822000, 51.21901109451852100, -28.33427604305564500 ) ) ; +#56432 = EDGE_CURVE ( 'NONE', #30374, #74996, #1181, .T. ) ; +#56433 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707767600, 38.93589406416699500, -28.68054222049974600 ) ) ; +#56434 = EDGE_CURVE ( 'NONE', #39702, #80445, #67528, .T. ) ; +#56435 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 21.18315603019279400, -28.70555803802998100 ) ) ; +#56436 = EDGE_CURVE ( 'NONE', #30232, #33477, #53041, .T. ) ; +#56437 = ORIENTED_EDGE ( 'NONE', *, *, #56937, .F. ) ; +#56438 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801593800, 80.90033558196088800, -28.70555803803014400 ) ) ; +#56439 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985000, 81.25732391202392100, -28.20555803802997700 ) ) ; +#56440 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753500, 49.07379779496241000, -28.70555803802996700 ) ) ; +#56441 = AXIS2_PLACEMENT_3D ( 'NONE', #32559, #57577, #69816 ) ; +#56442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56443 = CONICAL_SURFACE ( 'NONE', #76990, 10.50000000000009400, 0.7853981633974500600 ) ; +#56444 = ORIENTED_EDGE ( 'NONE', *, *, #59679, .F. ) ; +#56445 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965570000, 49.42298334620756600, -28.20555803802996700 ) ) ; +#56446 = ORIENTED_EDGE ( 'NONE', *, *, #62151, .T. ) ; +#56447 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027181500, 72.22511094383830300, -28.55192314908421400 ) ) ; +#56448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56449 = AXIS2_PLACEMENT_3D ( 'NONE', #12087, #55586, #18340 ) ; +#56450 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274713000, 13.73212903577628700, -28.37244029424737900 ) ) ; +#56451 = AXIS2_PLACEMENT_3D ( 'NONE', #45049, #7821, #51313 ) ; +#56452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56453 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 51.25489551879203300, -28.37193179497697000 ) ) ; +#56454 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428634700, 80.07141756547881100, -28.70555803803014400 ) ) ; +#56455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56456 = ADVANCED_FACE ( 'NONE', ( #39357 ), #20900, .T. ) ; +#56457 = CIRCLE ( 'NONE', #61009, 10.00000000000009400 ) ; +#56458 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 48.16666666666667900, 1.741883078712356500 ) ) ; +#56459 = ORIENTED_EDGE ( 'NONE', *, *, #67391, .F. ) ; +#56460 = EDGE_LOOP ( 'NONE', ( #7469, #10233, #10176 ) ) ; +#56461 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#56462 = ADVANCED_FACE ( 'NONE', ( #6286 ), #2618, .T. ) ; +#56463 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 13.33333333333335900, -3.705558038030004400 ) ) ; +#56464 = AXIS2_PLACEMENT_3D ( 'NONE', #12698, #37662, #31460 ) ; +#56465 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000460100, 18.16749699759770200, -28.20555803803009500 ) ) ; +#56466 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747182600, 39.13131911501876200, -28.51286550264508800 ) ) ; +#56467 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32057, #50783, #7272, #13580 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622851988200, 0.0009376791149930218000 ), + .UNSPECIFIED. ) ; +#56468 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#56469 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410172600, 81.13951010012866000, -28.36889022317260300 ) ) ; +#56470 = FACE_OUTER_BOUND ( 'NONE', #75448, .T. ) ; +#56471 = ORIENTED_EDGE ( 'NONE', *, *, #23792, .F. ) ; +#56472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56473 = VERTEX_POINT ( 'NONE', #77171 ) ; +#56474 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#56475 = EDGE_CURVE ( 'NONE', #58643, #55930, #38559, .T. ) ; +#56476 = CONICAL_SURFACE ( 'NONE', #63137, 10.00000000000009200, 0.7853981633974447300 ) ; +#56477 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769026200, 30.31139552890385900, -28.53900456328626600 ) ) ; +#56478 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 15.66666666666667100, 8.320721403598824400 ) ) ; +#56479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56480 = ORIENTED_EDGE ( 'NONE', *, *, #36269, .T. ) ; +#56481 = VERTEX_POINT ( 'NONE', #52380 ) ; +#56482 = ORIENTED_EDGE ( 'NONE', *, *, #78502, .F. ) ; +#56483 = EDGE_LOOP ( 'NONE', ( #19499, #1115, #78461 ) ) ; +#56484 = ORIENTED_EDGE ( 'NONE', *, *, #68129, .T. ) ; +#56485 = CARTESIAN_POINT ( 'NONE', ( -11.90673326026327800, 14.05000000000000600, -28.70555803802992800 ) ) ; +#56486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56487 = ADVANCED_FACE ( 'NONE', ( #53964 ), #51973, .F. ) ; +#56488 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 63.20037755566821900, -28.53664883431611800 ) ) ; +#56489 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714270500, 26.42318720225497900, -28.70555803802994200 ) ) ; +#56490 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 20.44069092601379400, -28.35186440610856100 ) ) ; +#56491 = CARTESIAN_POINT ( 'NONE', ( -0.8996655518395244600, 70.79999999999998300, -28.20555803802988100 ) ) ; +#56492 = LINE ( 'NONE', #13232, #43828 ) ; +#56493 = AXIS2_PLACEMENT_3D ( 'NONE', #48886, #49156, #61465 ) ; +#56494 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56495 = ORIENTED_EDGE ( 'NONE', *, *, #5099, .F. ) ; +#56496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56497 = ORIENTED_EDGE ( 'NONE', *, *, #7973, .T. ) ; +#56498 = EDGE_LOOP ( 'NONE', ( #39191, #68040, #13253, #1074 ) ) ; +#56499 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56500 = MANIFOLD_SOLID_BREP ( 'LPattern4', #27775 ) ; +#56501 = EDGE_LOOP ( 'NONE', ( #13359, #39013, #72303, #67111 ) ) ; +#56502 = VERTEX_POINT ( 'NONE', #46128 ) ; +#56503 = CARTESIAN_POINT ( 'NONE', ( 3.689097264716007000E-014, 83.20037755566822600, -28.53664883431613200 ) ) ; +#56504 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462657100, 61.25732391202388500, -28.20555803803014400 ) ) ; +#56505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56507 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 89.81066373133502600, -28.53923937255171900 ) ) ; +#56508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56509 = FACE_OUTER_BOUND ( 'NONE', #23391, .T. ) ; +#56510 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10828, #23079, #23340, #66863 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690709678500E-007, 0.0007331055842534808400 ), + .UNSPECIFIED. ) ; +#56511 = ORIENTED_EDGE ( 'NONE', *, *, #76064, .F. ) ; +#56512 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 67.60073525436760600, -28.70555803803007700 ) ) ; +#56513 = AXIS2_PLACEMENT_3D ( 'NONE', #43343, #6106, #49567 ) ; +#56514 = ORIENTED_EDGE ( 'NONE', *, *, #15164, .F. ) ; +#56515 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988500, 50.19949493661175700, -28.70555803802996700 ) ) ; +#56517 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492458800, 19.89456479767169800, -28.70555803802994200 ) ) ; +#56516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56518 = CARTESIAN_POINT ( 'NONE', ( -1.272691540716713400, 75.79999999999984100, -28.53979898350178200 ) ) ; +#56519 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56520 = EDGE_CURVE ( 'NONE', #20134, #53681, #9673, .T. ) ; +#56521 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 19.16666666666666400, -9.205558038030003900 ) ) ; +#56522 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#56523 = CIRCLE ( 'NONE', #17554, 9.500000000000099500 ) ; +#56524 = ORIENTED_EDGE ( 'NONE', *, *, #54190, .F. ) ; +#56525 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50228, #6737, #62792, #25534 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964929700, 0.0005839769583133971100 ), + .UNSPECIFIED. ) ; +#56526 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734532700, 81.32559822014155800, -28.29986836858054700 ) ) ; +#56527 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#56528 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#56529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56530 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#56531 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56532 = CARTESIAN_POINT ( 'NONE', ( -3.792055760494845300, 17.69228657120658700, -28.53891855580007000 ) ) ; +#56533 = EDGE_CURVE ( 'NONE', #44743, #30197, #75982, .T. ) ; +#56534 = EDGE_CURVE ( 'NONE', #67155, #55249, #31592, .T. ) ; +#56535 = ORIENTED_EDGE ( 'NONE', *, *, #19235, .T. ) ; +#56536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56537 = VERTEX_POINT ( 'NONE', #34468 ) ; +#56538 = ORIENTED_EDGE ( 'NONE', *, *, #4703, .T. ) ; +#56539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56540 = AXIS2_PLACEMENT_3D ( 'NONE', #27659, #46097, #33886 ) ; +#56541 = EDGE_CURVE ( 'NONE', #76892, #12637, #61559, .T. ) ; +#56542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56543 = EDGE_CURVE ( 'NONE', #13310, #23993, #15025, .T. ) ; +#56544 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#56545 = EDGE_CURVE ( 'NONE', #64449, #6009, #47044, .T. ) ; +#56546 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56547 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27755, #65019, #46451, #9204 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697749473600E-007, 0.0008724363063898889200 ), + .UNSPECIFIED. ) ; +#56548 = ADVANCED_FACE ( 'NONE', ( #62734 ), #77305, .F. ) ; +#56549 = CONICAL_SURFACE ( 'NONE', #50202, 10.50000000000009600, 0.7853981633974518300 ) ; +#56550 = VERTEX_POINT ( 'NONE', #22495 ) ; +#56551 = ORIENTED_EDGE ( 'NONE', *, *, #24754, .T. ) ; +#56552 = AXIS2_PLACEMENT_3D ( 'NONE', #57428, #1383, #51116 ) ; +#56553 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651225500, 71.99560977511660600, -28.70555803803014400 ) ) ; +#56554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56555 = ORIENTED_EDGE ( 'NONE', *, *, #26036, .T. ) ; +#56556 = FACE_OUTER_BOUND ( 'NONE', #31107, .T. ) ; +#56557 = ORIENTED_EDGE ( 'NONE', *, *, #4375, .F. ) ; +#56558 = ORIENTED_EDGE ( 'NONE', *, *, #23248, .T. ) ; +#56559 = ORIENTED_EDGE ( 'NONE', *, *, #22726, .T. ) ; +#56560 = ORIENTED_EDGE ( 'NONE', *, *, #77124, .T. ) ; +#56561 = ADVANCED_FACE ( 'NONE', ( #48093 ), #72285, .T. ) ; +#56562 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 62.83333333333335000, -2.545304000185615800 ) ) ; +#56563 = AXIS2_PLACEMENT_3D ( 'NONE', #8388, #14683, #45637 ) ; +#56564 = CIRCLE ( 'NONE', #8781, 10.00000000000009400 ) ; +#56565 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56566 = CARTESIAN_POINT ( 'NONE', ( 15.82622038785828200, 75.79999999999984100, -28.34928911331544700 ) ) ; +#56567 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 27.83333333333336100, -3.349151577478984600 ) ) ; +#56568 = ORIENTED_EDGE ( 'NONE', *, *, #72065, .F. ) ; +#56569 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812200, 30.96868088498122200, -28.51286550264512700 ) ) ; +#56570 = FACE_OUTER_BOUND ( 'NONE', #55746, .T. ) ; +#56571 = CARTESIAN_POINT ( 'NONE', ( -13.10033444816066100, 70.79999999999998300, -28.20555803802985700 ) ) ; +#56572 = ORIENTED_EDGE ( 'NONE', *, *, #22468, .T. ) ; +#56573 = ADVANCED_FACE ( 'NONE', ( #29662 ), #27699, .T. ) ; +#56574 = CARTESIAN_POINT ( 'NONE', ( 17.13281128086491400, 18.47187418724266200, -28.37194250757546500 ) ) ; +#56575 = ORIENTED_EDGE ( 'NONE', *, *, #78659, .T. ) ; +#56576 = ADVANCED_FACE ( 'NONE', ( #13101 ), #75361, .F. ) ; +#56577 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 65.16666666666668600, -4.152999154772358800 ) ) ; +#56578 = ORIENTED_EDGE ( 'NONE', *, *, #74927, .T. ) ; +#56579 = VERTEX_POINT ( 'NONE', #29063 ) ; +#56580 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#56581 = CARTESIAN_POINT ( 'NONE', ( -3.639407206442138300, 28.66749699759768800, -28.25435056028469600 ) ) ; +#56582 = FACE_OUTER_BOUND ( 'NONE', #64570, .T. ) ; +#56583 = AXIS2_PLACEMENT_3D ( 'NONE', #36251, #79778, #42487 ) ; +#56584 = EDGE_CURVE ( 'NONE', #16374, #43735, #11148, .T. ) ; +#56585 = PLANE ( 'NONE', #66699 ) ; +#56586 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492470100, 42.02620220503759200, -28.70555803802996700 ) ) ; +#56587 = ADVANCED_FACE ( 'NONE', ( #46136 ), #25751, .F. ) ; +#56588 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155508800, 65.46616414991811400, -28.37247596307108600 ) ) ; +#56589 = ORIENTED_EDGE ( 'NONE', *, *, #38997, .F. ) ; +#56590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56591 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995699800, 13.11903418172676800, -28.69431509262337700 ) ) ; +#56592 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56593 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56594 = CIRCLE ( 'NONE', #36253, 10.50000000000009600 ) ; +#56595 = ORIENTED_EDGE ( 'NONE', *, *, #77142, .T. ) ; +#56596 = EDGE_CURVE ( 'NONE', #63837, #15598, #58802, .T. ) ; +#56597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56598 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56599 = AXIS2_PLACEMENT_3D ( 'NONE', #1215, #69487, #75736 ) ; +#56600 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45715, #45431, #70762, #33508 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646240300, 0.0009605145132141868500 ), + .UNSPECIFIED. ) ; +#56601 = CARTESIAN_POINT ( 'NONE', ( 3.942873268533245500, 28.30869142985022800, -28.37223374938530500 ) ) ; +#56602 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#56603 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 36.46443389862718500, -28.54207364681939700 ) ) ; +#56604 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.16749699759768800, -28.20555803802995200 ) ) ; +#56605 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849296100, 9.820334718100443900, -28.30868034705248700 ) ) ; +#56606 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 35.04999999999999700, -28.20555803802995200 ) ) ; +#56607 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404400, 17.92298334620739200, -28.20555803802993500 ) ) ; +#56608 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#56609 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310477800, 41.49769010897086500, -28.61774594594330900 ) ) ; +#56610 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.41070809551055700, -28.20555803802994200 ) ) ; +#56611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56612 = AXIS2_PLACEMENT_3D ( 'NONE', #26682, #15540, #40267 ) ; +#56613 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 50.90033558196108000, -28.70555803802997700 ) ) ; +#56614 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#56615 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56616 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310633400, 61.49769010897038200, -28.61774594594310300 ) ) ; +#56617 = ORIENTED_EDGE ( 'NONE', *, *, #13082, .F. ) ; +#56618 = EDGE_LOOP ( 'NONE', ( #39252, #56555, #9404, #13138, #12279 ) ) ; +#56619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#56620 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 20.24660241562189000, -28.20555803802994200 ) ) ; +#56621 = AXIS2_PLACEMENT_3D ( 'NONE', #3221, #46729, #9478 ) ; +#56622 = CARTESIAN_POINT ( 'NONE', ( 9.438174915909121100, 30.98385710212512100, -28.57719681746177900 ) ) ; +#56623 = CYLINDRICAL_SURFACE ( 'NONE', #63260, 10.00000000000000000 ) ; +#56624 = ORIENTED_EDGE ( 'NONE', *, *, #21319, .F. ) ; +#56626 = EDGE_CURVE ( 'NONE', #38513, #40239, #32604, .T. ) ; +#56625 = ORIENTED_EDGE ( 'NONE', *, *, #68809, .T. ) ; +#56627 = FACE_OUTER_BOUND ( 'NONE', #26942, .T. ) ; +#56628 = ORIENTED_EDGE ( 'NONE', *, *, #30132, .T. ) ; +#56629 = ORIENTED_EDGE ( 'NONE', *, *, #10209, .T. ) ; +#56630 = ORIENTED_EDGE ( 'NONE', *, *, #65196, .T. ) ; +#56631 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 33.83333333333334300, -9.205558038030003900 ) ) ; +#56632 = CARTESIAN_POINT ( 'NONE', ( 15.20655873232858800, 49.06067300957097600, -28.70555803803002300 ) ) ; +#56633 = ORIENTED_EDGE ( 'NONE', *, *, #54738, .F. ) ; +#56634 = CIRCLE ( 'NONE', #42627, 10.00000000000009200 ) ; +#56635 = CARTESIAN_POINT ( 'NONE', ( -16.53469939396896000, 9.232650303015518000, -28.58709120703527900 ) ) ; +#56636 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656716300, 28.85339758437810400, -28.20555803802994200 ) ) ; +#56637 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 30.74660241562181900, -28.20555803802995200 ) ) ; +#56638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76459, #32946, #1930, #45412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648281873426800E-007, 0.0004318378175225197500 ), + .UNSPECIFIED. ) ; +#56639 = ADVANCED_FACE ( 'NONE', ( #70507 ), #56862, .T. ) ; +#56640 = ORIENTED_EDGE ( 'NONE', *, *, #61340, .T. ) ; +#56641 = ORIENTED_EDGE ( 'NONE', *, *, #39613, .F. ) ; +#56642 = EDGE_CURVE ( 'NONE', #55552, #58752, #9142, .T. ) ; +#56643 = CONICAL_SURFACE ( 'NONE', #73375, 10.50000000000009600, 0.7853981633974500600 ) ; +#56644 = ORIENTED_EDGE ( 'NONE', *, *, #17352, .T. ) ; +#56645 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24065, #67567, #42794, #5553 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925627604300E-007, 0.0004431156063177091500 ), + .UNSPECIFIED. ) ; +#56646 = ORIENTED_EDGE ( 'NONE', *, *, #70320, .F. ) ; +#56647 = EDGE_CURVE ( 'NONE', #64791, #14827, #42243, .T. ) ; +#56648 = EDGE_LOOP ( 'NONE', ( #60243, #60153, #58811 ) ) ; +#56649 = ORIENTED_EDGE ( 'NONE', *, *, #68921, .T. ) ; +#56650 = ORIENTED_EDGE ( 'NONE', *, *, #14482, .F. ) ; +#56651 = CONICAL_SURFACE ( 'NONE', #1213, 10.50000000000009600, 0.7853981633974500600 ) ; +#56652 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 11.09027028261003000, -28.70555803802993500 ) ) ; +#56653 = ORIENTED_EDGE ( 'NONE', *, *, #31440, .F. ) ; +#56654 = CONICAL_SURFACE ( 'NONE', #25296, 10.00000000000009200, 0.7853981633974447300 ) ; +#56655 = ADVANCED_FACE ( 'NONE', ( #60788 ), #71465, .F. ) ; +#56656 = AXIS2_PLACEMENT_3D ( 'NONE', #58785, #34043, #77556 ) ; +#56657 = ORIENTED_EDGE ( 'NONE', *, *, #33526, .T. ) ; +#56658 = EDGE_CURVE ( 'NONE', #27733, #67246, #18151, .T. ) ; +#56659 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 71.25732391202386400, -28.20555803803014400 ) ) ; +#56660 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 71.43945992495532900, -28.34042301926881200 ) ) ; +#56661 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510925500, 28.97143078992715500, -28.37063977681166400 ) ) ; +#56662 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 5.166666666666681200, 9.794441961969994300 ) ) ; +#56664 = ORIENTED_EDGE ( 'NONE', *, *, #65512, .F. ) ; +#56663 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51487, #70278, #51751, #14546 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662954800 ), + .UNSPECIFIED. ) ; +#56665 = EDGE_CURVE ( 'NONE', #49759, #60902, #3670, .T. ) ; +#56666 = AXIS2_PLACEMENT_3D ( 'NONE', #5333, #48816, #11602 ) ; +#56667 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56669 = CONICAL_SURFACE ( 'NONE', #20061, 10.00000000000009200, 0.7853981633974447300 ) ; +#56670 = ORIENTED_EDGE ( 'NONE', *, *, #73029, .F. ) ; +#56671 = ADVANCED_FACE ( 'NONE', ( #7200 ), #38333, .T. ) ; +#56672 = CARTESIAN_POINT ( 'NONE', ( 17.32922790642997800, 90.46872208558184500, -28.43092544535690500 ) ) ; +#56673 = CARTESIAN_POINT ( 'NONE', ( 17.20629820083182100, 5.587403411472581500, -27.67935349084486100 ) ) ; +#56674 = AXIS2_PLACEMENT_3D ( 'NONE', #15664, #59172, #21927 ) ; +#56675 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56676 = AXIS2_PLACEMENT_3D ( 'NONE', #73708, #36417, #79964 ) ; +#56677 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56678 = EDGE_CURVE ( 'NONE', #3902, #5281, #54910, .T. ) ; +#56679 = EDGE_CURVE ( 'NONE', #4437, #57816, #69984, .T. ) ; +#56680 = ADVANCED_FACE ( 'NONE', ( #40297 ), #69498, .T. ) ; +#56681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56683 = AXIS2_PLACEMENT_3D ( 'NONE', #8566, #52068, #14847 ) ; +#56682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56684 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999561200, 81.96823913367204300, -28.70555803803014400 ) ) ; +#56685 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#56686 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 39.66666666666667100, -3.705558038030004400 ) ) ; +#56687 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003000, 71.35277818615384100, -28.70555803803016200 ) ) ; +#56688 = ORIENTED_EDGE ( 'NONE', *, *, #13224, .T. ) ; +#56689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30082, #23798, #61072, #36287 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487908500 ), + .UNSPECIFIED. ) ; +#56690 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56691 = ORIENTED_EDGE ( 'NONE', *, *, #51581, .F. ) ; +#56692 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725653300, 47.43535825203925800, -28.53896444442200000 ) ) ; +#56693 = EDGE_CURVE ( 'NONE', #5959, #46628, #21826, .T. ) ; +#56694 = CARTESIAN_POINT ( 'NONE', ( 23.26835236489644400, 99.86835236489645200, -24.60739684354884500 ) ) ; +#56695 = ADVANCED_FACE ( 'NONE', ( #73424 ), #19883, .F. ) ; +#56696 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56697 = AXIS2_PLACEMENT_3D ( 'NONE', #15880, #22144, #9622 ) ; +#56698 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.23796787468685900, -28.38801640354855100 ) ) ; +#56699 = AXIS2_PLACEMENT_3D ( 'NONE', #30162, #36117, #61157 ) ; +#56700 = CARTESIAN_POINT ( 'NONE', ( 11.76641327336527400, 94.21601807324954300, -28.37203026796585800 ) ) ; +#56701 = CARTESIAN_POINT ( 'NONE', ( 17.32934156052453300, 61.13134338025905400, -28.43089930266688000 ) ) ; +#56702 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26511, #57485, #57750, #20500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386344745400, 0.0008131256040077001300 ), + .UNSPECIFIED. ) ; +#56703 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56704 = EDGE_LOOP ( 'NONE', ( #35998, #45022, #8464, #47019, #19755 ) ) ; +#56705 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719593200, 87.94142842854296300, -28.37229765499282100 ) ) ; +#56706 = CONICAL_SURFACE ( 'NONE', #9481, 10.00000000000009400, 0.7853981633974447300 ) ; +#56707 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428576500, 49.57141756547892400, -28.70555803802996700 ) ) ; +#56708 = ORIENTED_EDGE ( 'NONE', *, *, #70855, .F. ) ; +#56709 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#56710 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#56711 = FACE_OUTER_BOUND ( 'NONE', #4613, .T. ) ; +#56712 = EDGE_LOOP ( 'NONE', ( #26748, #70924, #18663 ) ) ; +#56713 = CARTESIAN_POINT ( 'NONE', ( -12.53318012365767400, 85.79999999999998300, -28.37307693585060500 ) ) ; +#56714 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567151000, 39.35339758437810800, -28.20555803802995200 ) ) ; +#56715 = ORIENTED_EDGE ( 'NONE', *, *, #35151, .F. ) ; +#56716 = CONICAL_SURFACE ( 'NONE', #47530, 10.50000000000009600, 0.7853981633974482800 ) ; +#56717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#56718 = ORIENTED_EDGE ( 'NONE', *, *, #33651, .T. ) ; +#56719 = EDGE_LOOP ( 'NONE', ( #3267, #61533, #79561 ) ) ; +#56720 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56722 = ORIENTED_EDGE ( 'NONE', *, *, #69468, .F. ) ; +#56723 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#56724 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56725 = FACE_OUTER_BOUND ( 'NONE', #73726, .T. ) ; +#56726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56727 = EDGE_LOOP ( 'NONE', ( #48269, #42815, #48595, #3814 ) ) ; +#56728 = AXIS2_PLACEMENT_3D ( 'NONE', #50125, #12921, #56409 ) ; +#56729 = CIRCLE ( 'NONE', #73853, 9.500000000000097700 ) ; +#56730 = ORIENTED_EDGE ( 'NONE', *, *, #37574, .T. ) ; +#56731 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 46.00000000000000700, -1.205558038030002800 ) ) ; +#56732 = EDGE_LOOP ( 'NONE', ( #53910, #31251, #72529, #67342 ) ) ; +#56733 = ORIENTED_EDGE ( 'NONE', *, *, #28008, .F. ) ; +#56734 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ; +#56735 = ORIENTED_EDGE ( 'NONE', *, *, #9306, .T. ) ; +#56736 = CONICAL_SURFACE ( 'NONE', #9040, 10.00000000000009200, 0.7853981633974447300 ) ; +#56737 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 11.16666666666668900, 0.1341879241256129200 ) ) ; +#56738 = AXIS2_PLACEMENT_3D ( 'NONE', #33092, #76600, #39329 ) ; +#56739 = VERTEX_POINT ( 'NONE', #24371 ) ; +#56740 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56741 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#56742 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922501600, 80.09037803491502000, -28.29483400905891000 ) ) ; +#56743 = EDGE_CURVE ( 'NONE', #79838, #70673, #55540, .T. ) ; +#56744 = ORIENTED_EDGE ( 'NONE', *, *, #65983, .T. ) ; +#56745 = VERTEX_POINT ( 'NONE', #80392 ) ; +#56746 = CARTESIAN_POINT ( 'NONE', ( 17.24942871785973300, 50.73233621223956600, -28.44928083730075800 ) ) ; +#56747 = LINE ( 'NONE', #9796, #21734 ) ; +#56748 = EDGE_LOOP ( 'NONE', ( #24205, #42970, #47647, #11866, #72701 ) ) ; +#56749 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 61.78933626866497500, -28.53923937255173000 ) ) ; +#56750 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50674, #7441, #1457, #44938 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.002676326193402609200 ), + .UNSPECIFIED. ) ; +#56751 = FACE_OUTER_BOUND ( 'NONE', #67249, .T. ) ; +#56752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56753 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 13.50000000000000900, -9.258116921287651700 ) ) ; +#56754 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56755 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56756 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10906, #60691, #79445, #42148 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159532100E-007, 0.0008724363063898906500 ), + .UNSPECIFIED. ) ; +#56757 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543300, 50.49920551340399300, -28.70555803802996700 ) ) ; +#56758 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 36.22261628933270600, -28.70555803802995200 ) ) ; +#56759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56761 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7093, #44317, #32131, #75640 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283324222400, 0.0007287255810275582600 ), + .UNSPECIFIED. ) ; +#56762 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56763 = CARTESIAN_POINT ( 'NONE', ( 15.85179525542133800, 93.30363845825583300, -28.55999296337028400 ) ) ; +#56764 = FACE_OUTER_BOUND ( 'NONE', #68028, .T. ) ; +#56765 = EDGE_CURVE ( 'NONE', #28268, #32803, #41086, .T. ) ; +#56766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56767 = ADVANCED_FACE ( 'NONE', ( #52942 ), #67563, .F. ) ; +#56768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56769 = EDGE_CURVE ( 'NONE', #60081, #69830, #3302, .T. ) ; +#56770 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#56771 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000408600, 67.94142842854304800, -28.20555803803030800 ) ) ; +#56772 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#56773 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841389500, 39.16349705304865800, -28.30782889147481300 ) ) ; +#56775 = ORIENTED_EDGE ( 'NONE', *, *, #72542, .T. ) ; +#56774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56776 = ADVANCED_FACE ( 'NONE', ( #79277 ), #17925, .F. ) ; +#56777 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 33.39610994602603700, -28.37519436813182600 ) ) ; +#56778 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 90.34267608797567600, -28.20555803802997700 ) ) ; +#56779 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20832, #58081, #39583, #2293 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001333132141653025400 ), + .UNSPECIFIED. ) ; +#56780 = ORIENTED_EDGE ( 'NONE', *, *, #56436, .T. ) ; +#56781 = EDGE_CURVE ( 'NONE', #23878, #8073, #26648, .T. ) ; +#56782 = ADVANCED_FACE ( 'NONE', ( #50971 ), #65624, .T. ) ; +#56783 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#56784 = EDGE_CURVE ( 'NONE', #56121, #14649, #1346, .T. ) ; +#56785 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56786 = CIRCLE ( 'NONE', #5813, 10.00000000000009600 ) ; +#56787 = ORIENTED_EDGE ( 'NONE', *, *, #28859, .F. ) ; +#56788 = AXIS2_PLACEMENT_3D ( 'NONE', #12057, #67810, #55550 ) ; +#56789 = CIRCLE ( 'NONE', #77927, 10.50000000000009600 ) ; +#56790 = VERTEX_POINT ( 'NONE', #12672 ) ; +#56791 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 17.00000000000001400, 6.794441961969995200 ) ) ; +#56792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56793 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#56794 = CIRCLE ( 'NONE', #8926, 10.00000000000009200 ) ; +#56795 = ORIENTED_EDGE ( 'NONE', *, *, #8078, .F. ) ; +#56796 = EDGE_LOOP ( 'NONE', ( #13786, #51368, #73347, #32366 ) ) ; +#56797 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#56798 = VERTEX_POINT ( 'NONE', #125 ) ; +#56799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56800 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580925900, 21.73263087059575900, -28.67620115463453300 ) ) ; +#56801 = CARTESIAN_POINT ( 'NONE', ( 17.30192380577536300, 51.75831290081711700, -28.43753768099858100 ) ) ; +#56802 = AXIS2_PLACEMENT_3D ( 'NONE', #53000, #15761, #59272 ) ; +#56803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56804 = EDGE_CURVE ( 'NONE', #66170, #42971, #12173, .T. ) ; +#56805 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15445, #52683, #65251, #27990 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815819119900E-007, 0.0007763385940577032100 ), + .UNSPECIFIED. ) ; +#56806 = EDGE_CURVE ( 'NONE', #66196, #39538, #34482, .T. ) ; +#56807 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56808 = EDGE_CURVE ( 'NONE', #35350, #61277, #78507, .T. ) ; +#56810 = CONICAL_SURFACE ( 'NONE', #30052, 10.00000000000009200, 0.7853981633974447300 ) ; +#56809 = AXIS2_PLACEMENT_3D ( 'NONE', #72158, #10122, #78409 ) ; +#56811 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534570300, 39.99920551340398600, -28.70555803802995200 ) ) ; +#56812 = VERTEX_POINT ( 'NONE', #12930 ) ; +#56813 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263300, 49.07379779496234600, -28.70555803802996700 ) ) ; +#56814 = FACE_OUTER_BOUND ( 'NONE', #12599, .T. ) ; +#56815 = AXIS2_PLACEMENT_3D ( 'NONE', #4696, #10980, #41954 ) ; +#56816 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609421500, 81.46283204837340000, -28.48697406221668500 ) ) ; +#56817 = EDGE_LOOP ( 'NONE', ( #15604, #37913, #25216 ) ) ; +#56818 = ORIENTED_EDGE ( 'NONE', *, *, #59056, .F. ) ; +#56819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56820 = ORIENTED_EDGE ( 'NONE', *, *, #13801, .F. ) ; +#56821 = AXIS2_PLACEMENT_3D ( 'NONE', #7632, #69927, #32674 ) ; +#56822 = PLANE ( 'NONE', #33827 ) ; +#56823 = ORIENTED_EDGE ( 'NONE', *, *, #48056, .T. ) ; +#56824 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 24.55000000000000100, -28.20555803802994200 ) ) ; +#56825 = EDGE_CURVE ( 'NONE', #38513, #54740, #44169, .T. ) ; +#56826 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#56827 = CIRCLE ( 'NONE', #26266, 9.500000000000095900 ) ; +#56828 = AXIS2_PLACEMENT_3D ( 'NONE', #7663, #51160, #13966 ) ; +#56829 = AXIS2_PLACEMENT_3D ( 'NONE', #71233, #27745, #8914 ) ; +#56830 = EDGE_LOOP ( 'NONE', ( #10462, #52954, #28989, #38369 ) ) ; +#56831 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543758700, 61.52472935029881300, -28.39317435246134000 ) ) ; +#56832 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#56833 = ORIENTED_EDGE ( 'NONE', *, *, #36764, .T. ) ; +#56834 = ORIENTED_EDGE ( 'NONE', *, *, #38732, .T. ) ; +#56835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56836 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.86203212531320600, -28.38801640354856200 ) ) ; +#56837 = ORIENTED_EDGE ( 'NONE', *, *, #64323, .T. ) ; +#56838 = CONICAL_SURFACE ( 'NONE', #37724, 10.00000000000009400, 0.7853981633974447300 ) ; +#56839 = CARTESIAN_POINT ( 'NONE', ( 10.07349692871609500, 81.37839075872562900, -28.29547734244359000 ) ) ; +#56840 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 60.66666666666667900, 1.294441961969997200 ) ) ; +#56841 = CARTESIAN_POINT ( 'NONE', ( -10.22125914545564000, 18.16476764525110700, -28.30311733712044700 ) ) ; +#56842 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 25.66666666666667100, 2.794441961969992100 ) ) ; +#56843 = AXIS2_PLACEMENT_3D ( 'NONE', #3682, #53475, #16219 ) ; +#56844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56846 = CONICAL_SURFACE ( 'NONE', #4924, 10.00000000000009200, 0.7853981633974447300 ) ; +#56847 = CARTESIAN_POINT ( 'NONE', ( -11.03590776526158900, 49.50212297965121200, -28.25344967589750300 ) ) ; +#56848 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.43250300240229200, -28.20555803802997700 ) ) ; +#56849 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 62.99999999999999300, -1.205558038030002800 ) ) ; +#56850 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 25.96443389862718500, -28.54207364681938600 ) ) ; +#56851 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390709100, 71.46283204837338600, -28.48697406221672800 ) ) ; +#56852 = ORIENTED_EDGE ( 'NONE', *, *, #21526, .F. ) ; +#56853 = AXIS2_PLACEMENT_3D ( 'NONE', #69454, #32201, #75702 ) ; +#56854 = ORIENTED_EDGE ( 'NONE', *, *, #35485, .T. ) ; +#56855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56856 = VERTEX_POINT ( 'NONE', #44139 ) ; +#56857 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875024900, 65.13282980700489600, -28.53914313452768400 ) ) ; +#56858 = EDGE_CURVE ( 'NONE', #80776, #16766, #64043, .T. ) ; +#56859 = CARTESIAN_POINT ( 'NONE', ( -3.976840323493484200, 10.01912043132466200, -28.30223257055578800 ) ) ; +#56860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11111, #60894, #73394, #36123 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907038046900E-007, 0.0006651184466340161500 ), + .UNSPECIFIED. ) ; +#56861 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56862 = CONICAL_SURFACE ( 'NONE', #6275, 10.00000000000009200, 0.7853981633974447300 ) ; +#56863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56864 = EDGE_LOOP ( 'NONE', ( #79658, #54343, #78282, #2248, #75920 ) ) ; +#56865 = CIRCLE ( 'NONE', #74265, 10.00000000000009400 ) ; +#56866 = AXIS2_PLACEMENT_3D ( 'NONE', #39090, #70102, #51311 ) ; +#56867 = ORIENTED_EDGE ( 'NONE', *, *, #73125, .F. ) ; +#56868 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 81.65075715145280800, -28.20555803802997700 ) ) ; +#56869 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56870 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957533900, 32.09027028261002100, -28.70555803802995200 ) ) ; +#56871 = ORIENTED_EDGE ( 'NONE', *, *, #77277, .F. ) ; +#56872 = CONICAL_SURFACE ( 'NONE', #62582, 10.50000000000009200, 0.7853981633974482800 ) ; +#56873 = CARTESIAN_POINT ( 'NONE', ( 9.530136888809634500, 9.146957350529762100, -28.66910751791843700 ) ) ; +#56874 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#56875 = CIRCLE ( 'NONE', #35159, 9.500000000000097700 ) ; +#56876 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390812100, 51.46283204837324400, -28.48697406221691300 ) ) ; +#56877 = EDGE_LOOP ( 'NONE', ( #31934, #8330, #25813 ) ) ; +#56878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56879 = ORIENTED_EDGE ( 'NONE', *, *, #56679, .F. ) ; +#56881 = ORIENTED_EDGE ( 'NONE', *, *, #14244, .T. ) ; +#56880 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#56882 = ADVANCED_FACE ( 'NONE', ( #36404 ), #63677, .T. ) ; +#56883 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56884 = CARTESIAN_POINT ( 'NONE', ( 2.233092656309821200, 55.80000000000001800, -28.70555803802997700 ) ) ; +#56885 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48648, #11442, #67457, #30225 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193420145700, 0.001049055495482330900 ), + .UNSPECIFIED. ) ; +#56886 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#56887 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428636500, 18.07141756547896700, -28.70555803802992800 ) ) ; +#56888 = FACE_OUTER_BOUND ( 'NONE', #41943, .T. ) ; +#56889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56891 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150683400, 9.820334718100440300, -28.30868034705248700 ) ) ; +#56892 = VERTEX_POINT ( 'NONE', #927 ) ; +#56893 = CONICAL_SURFACE ( 'NONE', #49732, 10.00000000000009200, 0.7853981633974447300 ) ; +#56894 = EDGE_CURVE ( 'NONE', #23507, #71618, #49519, .T. ) ; +#56895 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 66.50000000000000000, -7.061964498581022400 ) ) ; +#56896 = ORIENTED_EDGE ( 'NONE', *, *, #31327, .F. ) ; +#56897 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507467300, 31.52620220503758800, -28.70555803802998800 ) ) ; +#56898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56899 = ORIENTED_EDGE ( 'NONE', *, *, #25924, .F. ) ; +#56902 = EDGE_CURVE ( 'NONE', #72130, #77331, #32516, .T. ) ; +#56901 = ORIENTED_EDGE ( 'NONE', *, *, #19386, .T. ) ; +#56900 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47273, #3770, #66086, #28868 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183069800, 0.005168056621191832200 ), + .UNSPECIFIED. ) ; +#56903 = VERTEX_POINT ( 'NONE', #69473 ) ; +#56904 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 90.51916201875667400, -28.45106778992437700 ) ) ; +#56905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56906 = VERTEX_POINT ( 'NONE', #44673 ) ; +#56907 = CIRCLE ( 'NONE', #22550, 10.00000000000009400 ) ; +#56908 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732829600, 79.66414768973987700, -28.38420446581344000 ) ) ; +#56909 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454032900, 72.51973550835639100, -28.70555803803022200 ) ) ; +#56910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56911 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#56912 = EDGE_LOOP ( 'NONE', ( #57134, #523, #74237, #66713 ) ) ; +#56913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56914 = EDGE_CURVE ( 'NONE', #31405, #1875, #35131, .T. ) ; +#56915 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510344300, 18.15930907398619700, -28.35186440610855400 ) ) ; +#56916 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69183, #50376, #6903, #31938 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549226006400E-007, 0.0008759529789574144200 ), + .UNSPECIFIED. ) ; +#56917 = ADVANCED_FACE ( 'NONE', ( #5275 ), #14026, .T. ) ; +#56918 = EDGE_CURVE ( 'NONE', #5460, #55084, #20648, .T. ) ; +#56919 = ORIENTED_EDGE ( 'NONE', *, *, #51635, .F. ) ; +#56920 = ORIENTED_EDGE ( 'NONE', *, *, #25714, .T. ) ; +#56921 = AXIS2_PLACEMENT_3D ( 'NONE', #37676, #43927, #24933 ) ; +#56922 = ORIENTED_EDGE ( 'NONE', *, *, #79904, .F. ) ; +#56923 = EDGE_CURVE ( 'NONE', #28066, #10560, #6178, .T. ) ; +#56924 = EDGE_LOOP ( 'NONE', ( #13796, #75991, #32357, #74723 ) ) ; +#56925 = FACE_OUTER_BOUND ( 'NONE', #20409, .T. ) ; +#56926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56927 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 31.66666666666667500, 5.722645192245505700 ) ) ; +#56928 = PLANE ( 'NONE', #36540 ) ; +#56929 = EDGE_CURVE ( 'NONE', #41205, #32780, #23787, .T. ) ; +#56930 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713895700, 53.67681279774509300, -28.70555803803030800 ) ) ; +#56931 = EDGE_CURVE ( 'NONE', #33868, #36682, #15975, .T. ) ; +#56932 = EDGE_CURVE ( 'NONE', #32148, #57507, #47071, .T. ) ; +#56933 = AXIS2_PLACEMENT_3D ( 'NONE', #68163, #74435, #24654 ) ; +#56934 = FACE_OUTER_BOUND ( 'NONE', #23412, .T. ) ; +#56935 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655685100, 38.92298334620757300, -28.20555803802996000 ) ) ; +#56936 = ORIENTED_EDGE ( 'NONE', *, *, #25105, .T. ) ; +#56937 = EDGE_CURVE ( 'NONE', #19712, #12182, #30586, .T. ) ; +#56938 = ORIENTED_EDGE ( 'NONE', *, *, #78264, .F. ) ; +#56939 = FACE_OUTER_BOUND ( 'NONE', #45134, .T. ) ; +#56940 = AXIS2_PLACEMENT_3D ( 'NONE', #4183, #16704, #41447 ) ; +#56941 = VERTEX_POINT ( 'NONE', #32746 ) ; +#56942 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972653800, 79.37488905616152100, -28.55192314908427100 ) ) ; +#56943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2507, #77059, #33539, #8760 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405672975714100E-007, 0.0007670610367940275500 ), + .UNSPECIFIED. ) ; +#56944 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#56945 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894334700, 35.05000000000000400, -28.70555803802995200 ) ) ; +#56946 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 3.000000000000002200, -12.20555803803000200 ) ) ; +#56947 = FACE_OUTER_BOUND ( 'NONE', #4968, .T. ) ; +#56948 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#56949 = CONICAL_SURFACE ( 'NONE', #53860, 10.50000000000009600, 0.7853981633974500600 ) ; +#56950 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#56951 = VERTEX_POINT ( 'NONE', #51736 ) ; +#56952 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001200, 23.37738371066728500, -28.70555803802995200 ) ) ; +#56953 = CONICAL_SURFACE ( 'NONE', #79739, 10.00000000000009600, 0.7853981633974482800 ) ; +#56954 = PLANE ( 'NONE', #7853 ) ; +#56955 = ORIENTED_EDGE ( 'NONE', *, *, #15076, .F. ) ; +#56956 = CARTESIAN_POINT ( 'NONE', ( 18.70799376455867200, 2.584012005781103100, -25.41400080068548600 ) ) ; +#56957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56958 = CARTESIAN_POINT ( 'NONE', ( 16.68767301991446300, 57.07041105632827500, -28.56367862433819500 ) ) ; +#56959 = ORIENTED_EDGE ( 'NONE', *, *, #50424, .T. ) ; +#56960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56961 = CARTESIAN_POINT ( 'NONE', ( 16.57123091997393900, 71.47225659168367400, -28.53062721603944100 ) ) ; +#56962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56963 = CIRCLE ( 'NONE', #41557, 10.00000000000009200 ) ; +#56964 = ADVANCED_FACE ( 'NONE', ( #78268 ), #76286, .F. ) ; +#56965 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#56967 = CONICAL_SURFACE ( 'NONE', #4387, 10.50000000000009600, 0.7853981633974500600 ) ; +#56966 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#56968 = AXIS2_PLACEMENT_3D ( 'NONE', #77410, #40406, #27948 ) ; +#56969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#56970 = ORIENTED_EDGE ( 'NONE', *, *, #13546, .F. ) ; +#56971 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142855112400, 87.92318720225479500, -28.70555803802997700 ) ) ; +#56973 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 37.50000000000000700, 2.454695999814380200 ) ) ; +#56972 = CIRCLE ( 'NONE', #6985, 10.50000000000009600 ) ; +#56974 = ORIENTED_EDGE ( 'NONE', *, *, #12715, .T. ) ; +#56975 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100947700, 41.97636006919872600, -28.38670679782147500 ) ) ; +#56976 = EDGE_CURVE ( 'NONE', #6864, #46068, #72508, .T. ) ; +#56977 = EDGE_LOOP ( 'NONE', ( #60142, #71323, #65222 ) ) ; +#56978 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56980 = AXIS2_PLACEMENT_3D ( 'NONE', #5184, #48676, #11464 ) ; +#56981 = VERTEX_POINT ( 'NONE', #20791 ) ; +#56982 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195760700, 63.65857157145707400, -28.37229765499300200 ) ) ; +#56983 = ORIENTED_EDGE ( 'NONE', *, *, #50095, .F. ) ; +#56984 = CARTESIAN_POINT ( 'NONE', ( 18.49893731473591900, 98.59787462947461700, -25.87172956347383500 ) ) ; +#56985 = ADVANCED_FACE ( 'NONE', ( #45103 ), #45757, .T. ) ; +#56986 = CONICAL_SURFACE ( 'NONE', #1541, 10.50000000000009600, 0.7853981633974500600 ) ; +#56987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56988 = CARTESIAN_POINT ( 'NONE', ( 11.95723973586425100, 55.80000000000026700, -28.53819074160723800 ) ) ; +#56990 = ORIENTED_EDGE ( 'NONE', *, *, #929, .F. ) ; +#56989 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540331000, 72.51973550835654700, -28.70555803803005900 ) ) ; +#56991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56992 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662742971200, 53.66464174796077900, -28.53896444442201400 ) ) ; +#56993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#56994 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#56995 = ORIENTED_EDGE ( 'NONE', *, *, #27989, .F. ) ; +#56996 = EDGE_LOOP ( 'NONE', ( #35572, #32069, #15630 ) ) ; +#56997 = FACE_OUTER_BOUND ( 'NONE', #10597, .T. ) ; +#56998 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#56999 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000044200, 16.62623792124928500, -28.70555803803042500 ) ) ; +#57000 = AXIS2_PLACEMENT_3D ( 'NONE', #76802, #64596, #8510 ) ; +#57001 = ORIENTED_EDGE ( 'NONE', *, *, #44451, .F. ) ; +#57002 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57003 = ORIENTED_EDGE ( 'NONE', *, *, #28008, .T. ) ; +#57004 = ADVANCED_FACE ( 'NONE', ( #61736 ), #26681, .T. ) ; +#57005 = CONICAL_SURFACE ( 'NONE', #42865, 10.50000000000009600, 0.7853981633974500600 ) ; +#57006 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67160, #23653, #36160, #79661 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648644926800E-007, 0.0007596411030280929200 ), + .UNSPECIFIED. ) ; +#57007 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555592300, 81.87833896172685400, -28.53892303408241900 ) ) ; +#57008 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#57009 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100671100, 41.97636006919909600, -28.38670679782168400 ) ) ; +#57010 = CARTESIAN_POINT ( 'NONE', ( 10.24306493325792600, 81.43482203710615900, -28.29548531138988200 ) ) ; +#57011 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567160700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#57012 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57013 = CARTESIAN_POINT ( 'NONE', ( -6.100334448160480400, 60.79999999999998300, -28.20555803802988500 ) ) ; +#57014 = ADVANCED_FACE ( 'NONE', ( #49021 ), #74371, .T. ) ; +#57015 = EDGE_CURVE ( 'NONE', #74996, #50435, #10124, .T. ) ; +#57016 = CIRCLE ( 'NONE', #77219, 10.50000000000009800 ) ; +#57017 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 43.83333333333334300, -4.152999154772353500 ) ) ; +#57018 = EDGE_CURVE ( 'NONE', #29731, #13310, #58026, .T. ) ; +#57019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#57020 = EDGE_LOOP ( 'NONE', ( #14577, #23539, #36582 ) ) ; +#57021 = CIRCLE ( 'NONE', #48857, 10.50000000000009600 ) ; +#57022 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 9.000000000000003600, -1.205558038030002800 ) ) ; +#57023 = ORIENTED_EDGE ( 'NONE', *, *, #2679, .T. ) ; +#57024 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510361600, 28.65930907398620100, -28.35186440610856500 ) ) ; +#57025 = EDGE_CURVE ( 'NONE', #13589, #63007, #43546, .T. ) ; +#57026 = ORIENTED_EDGE ( 'NONE', *, *, #77897, .F. ) ; +#57027 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22038, #40778, #59576, #22295 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206603964800E-005, 0.001076779618376415300 ), + .UNSPECIFIED. ) ; +#57028 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 47.89962244433173300, -28.53664883431609300 ) ) ; +#57029 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 71.82440674572720200, -28.45987523529583300 ) ) ; +#57030 = CIRCLE ( 'NONE', #23942, 10.00000000000009200 ) ; +#57031 = CIRCLE ( 'NONE', #54327, 9.500000000000097700 ) ; +#57032 = EDGE_CURVE ( 'NONE', #38688, #64652, #29173, .T. ) ; +#57033 = ORIENTED_EDGE ( 'NONE', *, *, #57707, .T. ) ; +#57034 = EDGE_CURVE ( 'NONE', #76903, #7608, #14653, .T. ) ; +#57035 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 83.67681279774501500, -28.70555803802997700 ) ) ; +#57036 = CIRCLE ( 'NONE', #20294, 9.500000000000099500 ) ; +#57037 = EDGE_LOOP ( 'NONE', ( #56834, #31062, #34052 ) ) ; +#57038 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57039 = VERTEX_POINT ( 'NONE', #9041 ) ; +#57040 = EDGE_CURVE ( 'NONE', #20847, #74377, #175, .T. ) ; +#57041 = EDGE_CURVE ( 'NONE', #68184, #66234, #66515, .T. ) ; +#57042 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 49.66749699759768100, -28.20555803802996700 ) ) ; +#57043 = EDGE_CURVE ( 'NONE', #80648, #58433, #51994, .T. ) ; +#57044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70444, #39158, #51651, #76705 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446042058800E-007, 0.0002745498510224153700 ), + .UNSPECIFIED. ) ; +#57045 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57046 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57047 = FACE_OUTER_BOUND ( 'NONE', #62248, .T. ) ; +#57048 = ORIENTED_EDGE ( 'NONE', *, *, #72439, .T. ) ; +#57049 = AXIS2_PLACEMENT_3D ( 'NONE', #33602, #77389, #40120 ) ; +#57050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57051 = ORIENTED_EDGE ( 'NONE', *, *, #26372, .F. ) ; +#57052 = ORIENTED_EDGE ( 'NONE', *, *, #30944, .F. ) ; +#57053 = CARTESIAN_POINT ( 'NONE', ( -18.90018766101960400, 2.199444854795427500, -24.96636700000717800 ) ) ; +#57054 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .T. ) ; +#57055 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57056 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410175400, 60.46048989987122700, -28.36889022317247100 ) ) ; +#57057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57058 = FACE_OUTER_BOUND ( 'NONE', #39569, .T. ) ; +#57059 = LINE ( 'NONE', #36300, #3492 ) ; +#57060 = AXIS2_PLACEMENT_3D ( 'NONE', #12379, #18615, #6111 ) ; +#57061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57062 = AXIS2_PLACEMENT_3D ( 'NONE', #66673, #72933, #60440 ) ; +#57063 = ORIENTED_EDGE ( 'NONE', *, *, #65416, .F. ) ; +#57064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57065 = EDGE_LOOP ( 'NONE', ( #44444, #12433, #71452 ) ) ; +#57066 = ADVANCED_FACE ( 'NONE', ( #80206 ), #24714, .T. ) ; +#57067 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544433000, 61.87833896172669800, -28.53892303408229500 ) ) ; +#57068 = ORIENTED_EDGE ( 'NONE', *, *, #28483, .T. ) ; +#57069 = CIRCLE ( 'NONE', #59696, 9.500000000000099500 ) ; +#57070 = EDGE_LOOP ( 'NONE', ( #67822, #8749, #69843, #428, #71790 ) ) ; +#57071 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489669500, 41.44069092601377900, -28.35186440610859600 ) ) ; +#57072 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 14.83333333333334100, -9.205558038030003900 ) ) ; +#57073 = CARTESIAN_POINT ( 'NONE', ( 17.24582400329030600, 60.89404291337248100, -28.45010999295951500 ) ) ; +#57074 = EDGE_LOOP ( 'NONE', ( #66921, #63556, #71999 ) ) ; +#57075 = CONICAL_SURFACE ( 'NONE', #55847, 10.50000000000009600, 0.7853981633974500600 ) ; +#57076 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69471, #13749, #32482, #75997 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001707792749031429200 ), + .UNSPECIFIED. ) ; +#57077 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57078 = CARTESIAN_POINT ( 'NONE', ( 3.243064933257827900, 51.43482203710632200, -28.29548531138974700 ) ) ; +#57079 = ADVANCED_FACE ( 'NONE', ( #28664 ), #72423, .F. ) ; +#57080 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 80.16749699759769500, -28.20555803802997700 ) ) ; +#57081 = AXIS2_PLACEMENT_3D ( 'NONE', #27985, #52680, #65247 ) ; +#57082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57083 = EDGE_CURVE ( 'NONE', #48589, #29936, #8129, .T. ) ; +#57084 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#57085 = ORIENTED_EDGE ( 'NONE', *, *, #21420, .T. ) ; +#57086 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#57087 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57088 = PLANE ( 'NONE', #40178 ) ; +#57089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57090 = CARTESIAN_POINT ( 'NONE', ( 2.107334138059952800E-013, 88.39962244433161200, -28.53664883431616100 ) ) ; +#57091 = FACE_OUTER_BOUND ( 'NONE', #12894, .T. ) ; +#57092 = EDGE_LOOP ( 'NONE', ( #44904, #32255, #69900, #19801, #34333 ) ) ; +#57093 = ADVANCED_FACE ( 'NONE', ( #57807 ), #22768, .F. ) ; +#57094 = EDGE_CURVE ( 'NONE', #63863, #60588, #39288, .T. ) ; +#57095 = CIRCLE ( 'NONE', #23830, 10.50000000000009200 ) ; +#57096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57097 = ORIENTED_EDGE ( 'NONE', *, *, #44038, .T. ) ; +#57098 = ORIENTED_EDGE ( 'NONE', *, *, #29913, .T. ) ; +#57099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57100 = FACE_OUTER_BOUND ( 'NONE', #50432, .T. ) ; +#57101 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57103 = ORIENTED_EDGE ( 'NONE', *, *, #17853, .F. ) ; +#57102 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 51.43250300240229200, -28.20555803802997700 ) ) ; +#57104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57105 = ADVANCED_FACE ( 'NONE', ( #55834 ), #53891, .F. ) ; +#57106 = FACE_OUTER_BOUND ( 'NONE', #39473, .T. ) ; +#57107 = AXIS2_PLACEMENT_3D ( 'NONE', #24895, #74409, #62158 ) ; +#57108 = FACE_OUTER_BOUND ( 'NONE', #53245, .T. ) ; +#57109 = ORIENTED_EDGE ( 'NONE', *, *, #21074, .F. ) ; +#57110 = CARTESIAN_POINT ( 'NONE', ( 3.985751803131512000, 60.01994747561619200, -28.24986299608857400 ) ) ; +#57111 = CARTESIAN_POINT ( 'NONE', ( -3.330398220515308400, 71.01872124563908500, -28.53757464917576000 ) ) ; +#57112 = ORIENTED_EDGE ( 'NONE', *, *, #67568, .F. ) ; +#57113 = ORIENTED_EDGE ( 'NONE', *, *, #79219, .T. ) ; +#57114 = ADVANCED_FACE ( 'NONE', ( #59775 ), #20817, .T. ) ; +#57115 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 58.50000000000000700, -4.865812075874393000 ) ) ; +#57116 = AXIS2_PLACEMENT_3D ( 'NONE', #34143, #77657, #40383 ) ; +#57117 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883219300, 9.894351187922390900, -28.41114655922292400 ) ) ; +#57118 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109122100, 81.10236277681499900, -28.32100408376067700 ) ) ; +#57119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55022, #17780, #73807, #36516 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925595429800E-007, 0.0004084731003434351300 ), + .UNSPECIFIED. ) ; +#57120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57121 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 23.50000000000002100, -7.061964498581016200 ) ) ; +#57122 = CIRCLE ( 'NONE', #36102, 10.50000000000009600 ) ; +#57123 = EDGE_LOOP ( 'NONE', ( #24740, #49553, #64169 ) ) ; +#57124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57125 = EDGE_CURVE ( 'NONE', #30265, #7540, #37318, .T. ) ; +#57126 = ORIENTED_EDGE ( 'NONE', *, *, #79221, .T. ) ; +#57127 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57129 = ORIENTED_EDGE ( 'NONE', *, *, #50695, .F. ) ; +#57130 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 60.83333333333335000, 1.741883078712340300 ) ) ; +#57131 = ORIENTED_EDGE ( 'NONE', *, *, #1191, .T. ) ; +#57132 = FACE_OUTER_BOUND ( 'NONE', #58694, .T. ) ; +#57133 = ORIENTED_EDGE ( 'NONE', *, *, #45803, .T. ) ; +#57134 = ORIENTED_EDGE ( 'NONE', *, *, #14272, .T. ) ; +#57135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57137 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#57138 = FACE_OUTER_BOUND ( 'NONE', #52484, .T. ) ; +#57139 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#57140 = ORIENTED_EDGE ( 'NONE', *, *, #28587, .T. ) ; +#57141 = EDGE_CURVE ( 'NONE', #24597, #29731, #12077, .T. ) ; +#57142 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#57143 = VERTEX_POINT ( 'NONE', #59940 ) ; +#57144 = CARTESIAN_POINT ( 'NONE', ( 17.04027359854961100, 49.72437813624628700, -28.30310527599303000 ) ) ; +#57145 = FACE_OUTER_BOUND ( 'NONE', #52742, .T. ) ; +#57146 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57147 = CARTESIAN_POINT ( 'NONE', ( 3.449243228018197300, 8.958478180218989500, -28.65366437610099800 ) ) ; +#57148 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311236100, 65.80000000000264000, -28.70555803802997700 ) ) ; +#57149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57150 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719594300, 12.15857157145700600, -28.37229765499279200 ) ) ; +#57151 = FACE_OUTER_BOUND ( 'NONE', #53146, .T. ) ; +#57152 = CARTESIAN_POINT ( 'NONE', ( -13.10033444816065500, 60.79999999999998300, -28.20555803802986000 ) ) ; +#57153 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180780500, 59.94924284854683800, -28.20555803803030800 ) ) ; +#57154 = AXIS2_PLACEMENT_3D ( 'NONE', #54899, #17669, #61188 ) ; +#57155 = EDGE_CURVE ( 'NONE', #44518, #75777, #37552, .T. ) ; +#57156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57157 = EDGE_CURVE ( 'NONE', #22393, #58782, #41249, .T. ) ; +#57158 = CARTESIAN_POINT ( 'NONE', ( 3.488276405822249500, 9.414546627889173200, -28.68840631370114000 ) ) ; +#57159 = ORIENTED_EDGE ( 'NONE', *, *, #69361, .F. ) ; +#57160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#57161 = EDGE_CURVE ( 'NONE', #20757, #70202, #23144, .T. ) ; +#57162 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 80.69966441803890700, -28.70555803802997700 ) ) ; +#57163 = AXIS2_PLACEMENT_3D ( 'NONE', #54183, #16944, #60474 ) ; +#57164 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 64.33333333333334300, 2.794441961969998300 ) ) ; +#57165 = FACE_OUTER_BOUND ( 'NONE', #31833, .T. ) ; +#57166 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844441900, 55.79999999999975600, -28.20555803803014400 ) ) ; +#57167 = EDGE_LOOP ( 'NONE', ( #5686, #20224, #24920, #5865, #35353, #15292, #35177 ) ) ; +#57168 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 49.84510448120794000, -28.37193179497696200 ) ) ; +#57169 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70738, #27258, #8709, #52212 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766073443347400E-007, 0.001119323292485774700 ), + .UNSPECIFIED. ) ; +#57171 = ORIENTED_EDGE ( 'NONE', *, *, #11061, .F. ) ; +#57172 = FACE_OUTER_BOUND ( 'NONE', #78037, .T. ) ; +#57173 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614763300, 10.10677350908825300, -28.30799595738906800 ) ) ; +#57174 = AXIS2_PLACEMENT_3D ( 'NONE', #25613, #62872, #56312 ) ; +#57175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57176 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57178 = AXIS2_PLACEMENT_3D ( 'NONE', #59422, #22157, #65687 ) ; +#57179 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.65857157145702400, -28.20555803802997700 ) ) ; +#57180 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459539800, 69.08026449164330500, -28.70555803803006300 ) ) ; +#57181 = ORIENTED_EDGE ( 'NONE', *, *, #36087, .T. ) ; +#57182 = EDGE_CURVE ( 'NONE', #50513, #70193, #43187, .T. ) ; +#57183 = FACE_OUTER_BOUND ( 'NONE', #16752, .T. ) ; +#57184 = EDGE_LOOP ( 'NONE', ( #55031, #30322, #32348 ) ) ; +#57185 = ADVANCED_FACE ( 'NONE', ( #51903 ), #66551, .T. ) ; +#57186 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57187 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 70.07141756547893900, -28.70555803802997700 ) ) ; +#57188 = ADVANCED_FACE ( 'NONE', ( #6214 ), #4684, .T. ) ; +#57189 = EDGE_CURVE ( 'NONE', #23867, #71000, #8640, .T. ) ; +#57190 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 29.50000000000002100, -7.061964498581022400 ) ) ; +#57191 = ORIENTED_EDGE ( 'NONE', *, *, #27473, .T. ) ; +#57192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57193 = AXIS2_PLACEMENT_3D ( 'NONE', #762, #31806, #38021 ) ; +#57194 = AXIS2_PLACEMENT_3D ( 'NONE', #52294, #71097, #33843 ) ; +#57195 = ADVANCED_FACE ( 'NONE', ( #68505 ), #16917, .F. ) ; +#57196 = CONICAL_SURFACE ( 'NONE', #50461, 10.00000000000009200, 0.7853981633974447300 ) ; +#57197 = FACE_OUTER_BOUND ( 'NONE', #45366, .T. ) ; +#57198 = ORIENTED_EDGE ( 'NONE', *, *, #4594, .F. ) ; +#57199 = ORIENTED_EDGE ( 'NONE', *, *, #40058, .F. ) ; +#57200 = EDGE_LOOP ( 'NONE', ( #53613, #12731, #1938, #64108 ) ) ; +#57201 = ORIENTED_EDGE ( 'NONE', *, *, #54746, .F. ) ; +#57202 = AXIS2_PLACEMENT_3D ( 'NONE', #18674, #62191, #24930 ) ; +#57203 = ORIENTED_EDGE ( 'NONE', *, *, #35929, .T. ) ; +#57204 = ORIENTED_EDGE ( 'NONE', *, *, #39107, .T. ) ; +#57205 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34331, #15821, #59346, #22090 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925594641000E-007, 0.0004431156063178606100 ), + .UNSPECIFIED. ) ; +#57206 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 0.8333333333333370300, 9.794441961969999600 ) ) ; +#57207 = CIRCLE ( 'NONE', #59541, 9.500000000000095900 ) ; +#57208 = AXIS2_PLACEMENT_3D ( 'NONE', #75599, #38319, #1075 ) ; +#57210 = VERTEX_POINT ( 'NONE', #4953 ) ; +#57209 = PLANE ( 'NONE', #17445 ) ; +#57211 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748463900, 60.22161678501183200, -28.29547179040443100 ) ) ; +#57212 = ORIENTED_EDGE ( 'NONE', *, *, #65924, .F. ) ; +#57213 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63156, #75636, #7350, #50856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691653422500E-007, 0.0008724363063894279100 ), + .UNSPECIFIED. ) ; +#57214 = ORIENTED_EDGE ( 'NONE', *, *, #9150, .T. ) ; +#57215 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489075000, 30.62856921007284300, -28.37063977681167500 ) ) ; +#57216 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#57217 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57219 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23303, #60587, #35821, #79344 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350299386700E-007, 0.0004318366892326860100 ), + .UNSPECIFIED. ) ; +#57221 = CARTESIAN_POINT ( 'NONE', ( 17.14651939117037900, 59.08511947570713100, -28.47263588290810100 ) ) ; +#57220 = FACE_OUTER_BOUND ( 'NONE', #62363, .T. ) ; +#57222 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57223 = AXIS2_PLACEMENT_3D ( 'NONE', #31866, #75369, #38078 ) ; +#57224 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#57225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57226 = EDGE_LOOP ( 'NONE', ( #23021, #16880, #8469, #67575 ) ) ; +#57227 = PLANE ( 'NONE', #21827 ) ; +#57228 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66985, #10966, #54454, #29750 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287064110800E-007, 0.0007303759720927695700 ), + .UNSPECIFIED. ) ; +#57229 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527500, 35.36787096422378300, -28.37244029424744300 ) ) ; +#57230 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609040400, 60.13716795162677200, -28.48697406221666400 ) ) ; +#57231 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 35.33333333333332900, -5.535685056952199400 ) ) ; +#57232 = FACE_OUTER_BOUND ( 'NONE', #46010, .T. ) ; +#57233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57234 = ORIENTED_EDGE ( 'NONE', *, *, #8222, .F. ) ; +#57235 = CARTESIAN_POINT ( 'NONE', ( -10.07349184251535400, 70.22161678501183200, -28.29547179040443100 ) ) ; +#57236 = ORIENTED_EDGE ( 'NONE', *, *, #45795, .F. ) ; +#57237 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507540700, 39.70543520232828200, -28.70555803802995200 ) ) ; +#57238 = VERTEX_POINT ( 'NONE', #42193 ) ; +#57239 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298138300, 55.79999999999997600, -28.70555803802997700 ) ) ; +#57240 = CARTESIAN_POINT ( 'NONE', ( 17.02721798809242400, 92.61360899404620300, -28.49792175823334600 ) ) ; +#57241 = CIRCLE ( 'NONE', #23772, 10.00000000000009400 ) ; +#57242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57243 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655593200, 49.42298334620760900, -28.20555803802997400 ) ) ; +#57244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57245 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 90.10230989102912200, -28.61774594594330900 ) ) ; +#57246 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#57247 = CARTESIAN_POINT ( 'NONE', ( 1.561251128379126400E-014, 32.47376207875059600, -28.70555803802996700 ) ) ; +#57248 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260019600, 70.20034312068834500, -28.70555803803001600 ) ) ; +#57249 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57250 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999706900, 83.65857157145697400, -28.20555803803030800 ) ) ; +#57251 = CONICAL_SURFACE ( 'NONE', #12987, 10.00000000000009600, 0.7853981633974482800 ) ; +#57252 = ORIENTED_EDGE ( 'NONE', *, *, #36867, .F. ) ; +#57253 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743468600, 36.93535825203924400, -28.53896444442198900 ) ) ; +#57254 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 31.12753447840887200, -28.38801640354855500 ) ) ; +#57255 = EDGE_CURVE ( 'NONE', #46801, #50924, #49957, .T. ) ; +#57256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57257 = VERTEX_POINT ( 'NONE', #11237 ) ; +#57258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57259 = VERTEX_POINT ( 'NONE', #61011 ) ; +#57260 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537164400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#57261 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57262 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57263 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#57264 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61414, #42868, #74187, #36869 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690562570100E-007, 0.0007331055842534731400 ), + .UNSPECIFIED. ) ; +#57265 = EDGE_CURVE ( 'NONE', #66170, #53446, #18854, .T. ) ; +#57266 = CONICAL_SURFACE ( 'NONE', #37329, 10.50000000000009600, 0.7853981633974500600 ) ; +#57267 = EDGE_CURVE ( 'NONE', #22477, #23125, #74980, .T. ) ; +#57268 = CYLINDRICAL_SURFACE ( 'NONE', #71978, 10.00000000000000000 ) ; +#57269 = ORIENTED_EDGE ( 'NONE', *, *, #12860, .F. ) ; +#57270 = AXIS2_PLACEMENT_3D ( 'NONE', #53235, #59515, #9725 ) ; +#57271 = ORIENTED_EDGE ( 'NONE', *, *, #28836, .F. ) ; +#57272 = ORIENTED_EDGE ( 'NONE', *, *, #17499, .T. ) ; +#57273 = FACE_OUTER_BOUND ( 'NONE', #14819, .T. ) ; +#57274 = ORIENTED_EDGE ( 'NONE', *, *, #18555, .F. ) ; +#57275 = ORIENTED_EDGE ( 'NONE', *, *, #6738, .T. ) ; +#57276 = ORIENTED_EDGE ( 'NONE', *, *, #36086, .F. ) ; +#57278 = ORIENTED_EDGE ( 'NONE', *, *, #31819, .F. ) ; +#57277 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#57279 = EDGE_LOOP ( 'NONE', ( #65905, #37394, #65105 ) ) ; +#57280 = ADVANCED_FACE ( 'NONE', ( #33449 ), #31520, .F. ) ; +#57281 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 6.833333333333335700, -2.545304000185615800 ) ) ; +#57282 = VERTEX_POINT ( 'NONE', #36487 ) ; +#57283 = AXIS2_PLACEMENT_3D ( 'NONE', #69727, #57225, #75980 ) ; +#57284 = EDGE_CURVE ( 'NONE', #5527, #39832, #60540, .T. ) ; +#57285 = EDGE_CURVE ( 'NONE', #3913, #61214, #46022, .T. ) ; +#57286 = EDGE_CURVE ( 'NONE', #45907, #76799, #31613, .T. ) ; +#57287 = AXIS2_PLACEMENT_3D ( 'NONE', #38239, #44476, #75524 ) ; +#57288 = ORIENTED_EDGE ( 'NONE', *, *, #70376, .F. ) ; +#57289 = CARTESIAN_POINT ( 'NONE', ( 17.41531457165561400, 70.41631403997794800, -28.40988208712484600 ) ) ; +#57290 = CIRCLE ( 'NONE', #68341, 9.500000000000099500 ) ; +#57291 = EDGE_LOOP ( 'NONE', ( #57638, #50332, #21851, #21374, #19338, #58227, #19677 ) ) ; +#57292 = AXIS2_PLACEMENT_3D ( 'NONE', #34208, #77708, #40447 ) ; +#57293 = VERTEX_POINT ( 'NONE', #74054 ) ; +#57294 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730100800, 70.01262610361149500, -28.29936525552464100 ) ) ; +#57295 = EDGE_LOOP ( 'NONE', ( #38826, #16638, #66664, #43794, #41800, #62417 ) ) ; +#57296 = ORIENTED_EDGE ( 'NONE', *, *, #6142, .T. ) ; +#57297 = AXIS2_PLACEMENT_3D ( 'NONE', #48023, #23307, #66838 ) ; +#57298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57299 = CIRCLE ( 'NONE', #33879, 9.500000000000099500 ) ; +#57300 = EDGE_CURVE ( 'NONE', #28549, #11554, #2281, .T. ) ; +#57301 = AXIS2_PLACEMENT_3D ( 'NONE', #66060, #22526, #78300 ) ; +#57302 = AXIS2_PLACEMENT_3D ( 'NONE', #62951, #56668, #25692 ) ; +#57303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57304 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844437300, 55.46616414991820000, -28.37247596307091500 ) ) ; +#57305 = ORIENTED_EDGE ( 'NONE', *, *, #12010, .F. ) ; +#57306 = ADVANCED_FACE ( 'NONE', ( #48009 ), #62650, .T. ) ; +#57307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57308 = CARTESIAN_POINT ( 'NONE', ( -3.014248196868599900, 70.01994747561619200, -28.24986299608853500 ) ) ; +#57309 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 70.34267608797600200, -28.20555803803030800 ) ) ; +#57310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57311 = VECTOR ( 'NONE', #61635, 1000.000000000000000 ) ; +#57312 = ORIENTED_EDGE ( 'NONE', *, *, #28493, .F. ) ; +#57313 = CARTESIAN_POINT ( 'NONE', ( -17.39823273417429000, 5.203350255233800700, -27.48047765246668200 ) ) ; +#57314 = ORIENTED_EDGE ( 'NONE', *, *, #58548, .F. ) ; +#57315 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 25.72261628933269900, -28.70555803802994200 ) ) ; +#57316 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489500, 61.43945992495518000, -28.34042301926893600 ) ) ; +#57317 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511819400, 69.60439022488353100, -28.70555803803030800 ) ) ; +#57318 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801549800, 90.69966441803892100, -28.70555803803030800 ) ) ; +#57319 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510337200, 30.94069092601379400, -28.35186440610857500 ) ) ; +#57320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35018, #59760, #16238, #78537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397412600, 0.001517194977238169600 ), + .UNSPECIFIED. ) ; +#57323 = AXIS2_PLACEMENT_3D ( 'NONE', #68592, #50040, #31343 ) ; +#57324 = FACE_OUTER_BOUND ( 'NONE', #63803, .T. ) ; +#57325 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 12.66666666666667300, 5.722645192245505700 ) ) ; +#57326 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567176700, 20.24660241562181900, -28.20555803802994200 ) ) ; +#57327 = PLANE ( 'NONE', #65991 ) ; +#57328 = FACE_OUTER_BOUND ( 'NONE', #48737, .T. ) ; +#57329 = ORIENTED_EDGE ( 'NONE', *, *, #41193, .F. ) ; +#57330 = ORIENTED_EDGE ( 'NONE', *, *, #69160, .T. ) ; +#57331 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#57332 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57333 = AXIS2_PLACEMENT_3D ( 'NONE', #66901, #54362, #35880 ) ; +#57334 = EDGE_LOOP ( 'NONE', ( #38130, #66696, #61289, #34124, #8234 ) ) ; +#57335 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69033, #56518, #19540, #63058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459157009427500E-007, 0.0007679767755143062800 ), + .UNSPECIFIED. ) ; +#57336 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609685300, 60.13716795162641700, -28.48697406221641200 ) ) ; +#57337 = EDGE_CURVE ( 'NONE', #61282, #12264, #14954, .T. ) ; +#57338 = FACE_OUTER_BOUND ( 'NONE', #80051, .T. ) ; +#57339 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 73.99926474563206100, -28.70555803803007700 ) ) ; +#57340 = ORIENTED_EDGE ( 'NONE', *, *, #18296, .T. ) ; +#57341 = CIRCLE ( 'NONE', #16684, 10.00000000000009200 ) ; +#57342 = ORIENTED_EDGE ( 'NONE', *, *, #5696, .T. ) ; +#57343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57344 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853334200, 49.30869142985031300, -28.37223374938522000 ) ) ; +#57345 = ORIENTED_EDGE ( 'NONE', *, *, #35955, .T. ) ; +#57346 = AXIS2_PLACEMENT_3D ( 'NONE', #17483, #42468, #36240 ) ; +#57347 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#57348 = VERTEX_POINT ( 'NONE', #74327 ) ; +#57349 = CIRCLE ( 'NONE', #5345, 10.00000000000009200 ) ; +#57350 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54571, #60847, #5054, #48542 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747502689823900900E-007, 0.0002745485907028732800 ), + .UNSPECIFIED. ) ; +#57351 = ORIENTED_EDGE ( 'NONE', *, *, #7693, .T. ) ; +#57352 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462292300, 70.20590598242360200, -28.39369363572378500 ) ) ; +#57353 = ORIENTED_EDGE ( 'NONE', *, *, #6519, .T. ) ; +#57354 = ORIENTED_EDGE ( 'NONE', *, *, #24636, .T. ) ; +#57355 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#57356 = ORIENTED_EDGE ( 'NONE', *, *, #72087, .T. ) ; +#57357 = EDGE_LOOP ( 'NONE', ( #1459, #2408, #29327, #7528 ) ) ; +#57358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#57360 = EDGE_LOOP ( 'NONE', ( #22386, #76057, #21122, #73377 ) ) ; +#57361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68054, #61815, #49243, #30804, #74326, #37022 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082187800, 0.004114855318164375600 ), + .UNSPECIFIED. ) ; +#57362 = CARTESIAN_POINT ( 'NONE', ( -4.561944296567989300, 39.11613305479827600, -28.57723854182874800 ) ) ; +#57363 = ADVANCED_FACE ( 'NONE', ( #70433 ), #13026, .T. ) ; +#57364 = CIRCLE ( 'NONE', #74553, 9.500000000000099500 ) ; +#57365 = ORIENTED_EDGE ( 'NONE', *, *, #30589, .T. ) ; +#57366 = EDGE_CURVE ( 'NONE', #74066, #24389, #17147, .T. ) ; +#57367 = VERTEX_POINT ( 'NONE', #24808 ) ; +#57368 = VERTEX_POINT ( 'NONE', #6300 ) ; +#57369 = ORIENTED_EDGE ( 'NONE', *, *, #40387, .F. ) ; +#57370 = EDGE_CURVE ( 'NONE', #72923, #16445, #79205, .T. ) ; +#57371 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57372 = FACE_OUTER_BOUND ( 'NONE', #19414, .T. ) ; +#57373 = ADVANCED_FACE ( 'NONE', ( #29589 ), #44092, .F. ) ; +#57374 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 56.33333333333335000, 3.124568980892187500 ) ) ; +#57375 = ORIENTED_EDGE ( 'NONE', *, *, #63722, .F. ) ; +#57376 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 60.16749699759768800, -28.20555803802997700 ) ) ; +#57377 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832100, 81.25732391202397800, -28.20555803802997700 ) ) ; +#57378 = EDGE_CURVE ( 'NONE', #41981, #60011, #60706, .T. ) ; +#57379 = ORIENTED_EDGE ( 'NONE', *, *, #75253, .T. ) ; +#57380 = ORIENTED_EDGE ( 'NONE', *, *, #61903, .F. ) ; +#57381 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 21.33333333333334300, 5.722645192245503900 ) ) ; +#57382 = EDGE_CURVE ( 'NONE', #47696, #24420, #2646, .T. ) ; +#57383 = AXIS2_PLACEMENT_3D ( 'NONE', #11196, #17174, #60962 ) ; +#57384 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.932503002402292200, -28.20555803802994200 ) ) ; +#57385 = FACE_OUTER_BOUND ( 'NONE', #34764, .T. ) ; +#57386 = EDGE_LOOP ( 'NONE', ( #28730, #25203, #14754, #67590 ) ) ; +#57387 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#57388 = ADVANCED_FACE ( 'NONE', ( #64623 ), #75292, .F. ) ; +#57389 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 58.66666666666667900, -6.705558038030000400 ) ) ; +#57390 = VERTEX_POINT ( 'NONE', #557 ) ; +#57391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#57392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57393 = AXIS2_PLACEMENT_3D ( 'NONE', #18814, #49779, #62344 ) ; +#57394 = EDGE_CURVE ( 'NONE', #69682, #26644, #68990, .T. ) ; +#57395 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#57396 = EDGE_CURVE ( 'NONE', #2413, #48803, #11070, .T. ) ; +#57397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68490, #24973, #74749, #37446 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247645163200, 0.0009605145132138824000 ), + .UNSPECIFIED. ) ; +#57398 = CARTESIAN_POINT ( 'NONE', ( 2.438174915909135300, 20.48385710212512100, -28.57719681746175800 ) ) ; +#57399 = EDGE_CURVE ( 'NONE', #1236, #9324, #54524, .T. ) ; +#57400 = ADVANCED_FACE ( 'NONE', ( #27623 ), #25671, .T. ) ; +#57401 = CARTESIAN_POINT ( 'NONE', ( -11.20584859653752100, 60.20590598242372900, -28.39369363572360100 ) ) ; +#57402 = AXIS2_PLACEMENT_3D ( 'NONE', #33238, #39478, #70486 ) ; +#57403 = CIRCLE ( 'NONE', #59821, 10.00000000000009200 ) ; +#57404 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57405 = FACE_OUTER_BOUND ( 'NONE', #18714, .T. ) ; +#57406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57407 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 35.05000000000000400, -28.20555803802995200 ) ) ; +#57408 = ORIENTED_EDGE ( 'NONE', *, *, #48528, .T. ) ; +#57409 = CARTESIAN_POINT ( 'NONE', ( -9.602545352391260300, 50.73330895810819600, -28.60301268563893000 ) ) ; +#57410 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57411 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#57412 = EDGE_CURVE ( 'NONE', #56981, #77240, #40056, .T. ) ; +#57413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57414 = AXIS2_PLACEMENT_3D ( 'NONE', #40380, #3116, #46604 ) ; +#57415 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511817600, 59.60439022488355200, -28.70555803803030800 ) ) ; +#57416 = AXIS2_PLACEMENT_3D ( 'NONE', #71202, #33949, #77461 ) ; +#57417 = ORIENTED_EDGE ( 'NONE', *, *, #25480, .T. ) ; +#57418 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999955600, 61.61077422949630000, -28.37255355648656500 ) ) ; +#57419 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#57420 = CIRCLE ( 'NONE', #70116, 10.50000000000009600 ) ; +#57421 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.47246552159110400, -28.38801640354855800 ) ) ; +#57422 = ORIENTED_EDGE ( 'NONE', *, *, #32116, .F. ) ; +#57423 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57424 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880588300, 34.42896305882239700, -28.53160243214819000 ) ) ; +#57425 = FACE_OUTER_BOUND ( 'NONE', #56912, .T. ) ; +#57426 = ORIENTED_EDGE ( 'NONE', *, *, #50988, .T. ) ; +#57427 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 62.16666666666665000, -3.349151577478988200 ) ) ; +#57428 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57429 = ORIENTED_EDGE ( 'NONE', *, *, #45662, .F. ) ; +#57430 = FACE_OUTER_BOUND ( 'NONE', #3313, .T. ) ; +#57431 = ORIENTED_EDGE ( 'NONE', *, *, #27730, .T. ) ; +#57432 = ORIENTED_EDGE ( 'NONE', *, *, #67302, .T. ) ; +#57434 = ORIENTED_EDGE ( 'NONE', *, *, #58353, .T. ) ; +#57433 = CARTESIAN_POINT ( 'NONE', ( -3.243064933257744400, 61.43482203710631500, -28.29548531138976800 ) ) ; +#57435 = VERTEX_POINT ( 'NONE', #44570 ) ; +#57436 = ORIENTED_EDGE ( 'NONE', *, *, #18301, .F. ) ; +#57437 = ORIENTED_EDGE ( 'NONE', *, *, #884, .T. ) ; +#57438 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826460800, 51.64948861668521100, -28.33414295261598400 ) ) ; +#57439 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 51.43250300240229900, -28.20555803802997700 ) ) ; +#57440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57441 = AXIS2_PLACEMENT_3D ( 'NONE', #57786, #45233, #26795 ) ; +#57442 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57443 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15601, #59105, #34370, #77880 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454575920800E-007, 0.0004559726636571102400 ), + .UNSPECIFIED. ) ; +#57444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57445 = AXIS2_PLACEMENT_3D ( 'NONE', #63064, #25810, #69298 ) ; +#57446 = EDGE_LOOP ( 'NONE', ( #69701, #50535, #30505, #41586, #76226 ) ) ; +#57447 = CIRCLE ( 'NONE', #48414, 10.00000000000009400 ) ; +#57448 = EDGE_LOOP ( 'NONE', ( #22531, #35601, #29629 ) ) ; +#57449 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#57450 = VERTEX_POINT ( 'NONE', #32125 ) ; +#57451 = VERTEX_POINT ( 'NONE', #50851 ) ; +#57452 = EDGE_CURVE ( 'NONE', #11162, #14140, #25640, .T. ) ; +#57453 = EDGE_LOOP ( 'NONE', ( #34197, #71873, #38786, #6224, #42138 ) ) ; +#57454 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39000, #26807, #45505, #8259 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690686006000E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#57455 = EDGE_LOOP ( 'NONE', ( #26641, #58369, #8645 ) ) ; +#57456 = AXIS2_PLACEMENT_3D ( 'NONE', #58371, #21127, #64651 ) ; +#57457 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57458 = FACE_OUTER_BOUND ( 'NONE', #54052, .T. ) ; +#57459 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 27.33333333333334600, 2.794441961969998300 ) ) ; +#57460 = AXIS2_PLACEMENT_3D ( 'NONE', #23199, #66717, #29493 ) ; +#57461 = VERTEX_POINT ( 'NONE', #57148 ) ; +#57462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57463 = ADVANCED_FACE ( 'NONE', ( #340 ), #73350, .F. ) ; +#57464 = AXIS2_PLACEMENT_3D ( 'NONE', #4870, #11146, #42115 ) ; +#57465 = CIRCLE ( 'NONE', #41013, 5.000000000000000900 ) ; +#57467 = EDGE_LOOP ( 'NONE', ( #53520, #31827, #19679, #20288 ) ) ; +#57466 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#57468 = ORIENTED_EDGE ( 'NONE', *, *, #45911, .F. ) ; +#57469 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 30.94069092601378300, -28.35186440610858600 ) ) ; +#57470 = ADVANCED_FACE ( 'NONE', ( #35429 ), #40228, .T. ) ; +#57471 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57472 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, -1.333333333333325000, -10.73183747965883100 ) ) ; +#57473 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609813600, 61.46283204837369900, -28.48697406221627300 ) ) ; +#57474 = EDGE_CURVE ( 'NONE', #79804, #35598, #56786, .T. ) ; +#57475 = FACE_OUTER_BOUND ( 'NONE', #38602, .T. ) ; +#57476 = ADVANCED_FACE ( 'NONE', ( #77236 ), #71385, .T. ) ; +#57477 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042459000, 11.09027028261002600, -28.70555803802993500 ) ) ; +#57478 = EDGE_CURVE ( 'NONE', #31957, #55934, #11168, .T. ) ; +#57479 = VERTEX_POINT ( 'NONE', #7889 ) ; +#57480 = ORIENTED_EDGE ( 'NONE', *, *, #70204, .T. ) ; +#57481 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550024600, 59.83662311806182300, -28.37223523914888900 ) ) ; +#57482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57483 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#57484 = VERTEX_POINT ( 'NONE', #51098 ) ; +#57485 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653698300, 60.20590598242359400, -28.39369363572356900 ) ) ; +#57486 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.16749699759768800, -28.20555803802997700 ) ) ; +#57487 = EDGE_CURVE ( 'NONE', #47643, #61442, #77466, .T. ) ; +#57488 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20241, #1710, #7970, #51466 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964934100, 0.0005839769583134224800 ), + .UNSPECIFIED. ) ; +#57489 = ADVANCED_FACE ( 'NONE', ( #23719 ), #38257, .T. ) ; +#57490 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 69.28967419478925600, -28.59353418718928100 ) ) ; +#57491 = FACE_OUTER_BOUND ( 'NONE', #47001, .T. ) ; +#57492 = ORIENTED_EDGE ( 'NONE', *, *, #76570, .F. ) ; +#57493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57494 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180781400, 69.94924284854683100, -28.20555803803030800 ) ) ; +#57495 = ORIENTED_EDGE ( 'NONE', *, *, #16022, .F. ) ; +#57496 = EDGE_CURVE ( 'NONE', #71041, #17474, #63020, .T. ) ; +#57497 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 33.16666666666668600, 3.794441961969996900 ) ) ; +#57498 = EDGE_CURVE ( 'NONE', #15824, #77820, #54826, .T. ) ; +#57499 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#57500 = VERTEX_POINT ( 'NONE', #70441 ) ; +#57501 = CONICAL_SURFACE ( 'NONE', #10474, 10.50000000000009600, 0.7853981633974500600 ) ; +#57502 = ORIENTED_EDGE ( 'NONE', *, *, #72494, .T. ) ; +#57503 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033300, 71.46283204837304500, -28.48697406221691300 ) ) ; +#57504 = ORIENTED_EDGE ( 'NONE', *, *, #68466, .T. ) ; +#57505 = VERTEX_POINT ( 'NONE', #57945 ) ; +#57506 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671695700, 59.66414768974019700, -28.38420446581311300 ) ) ; +#57507 = VERTEX_POINT ( 'NONE', #51917 ) ; +#57508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57509 = ORIENTED_EDGE ( 'NONE', *, *, #78845, .F. ) ; +#57510 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819353600, 69.94924284854693000, -28.20555803802997700 ) ) ; +#57511 = ADVANCED_FACE ( 'NONE', ( #9067 ), #69421, .F. ) ; +#57512 = AXIS2_PLACEMENT_3D ( 'NONE', #17494, #42477, #73515 ) ; +#57513 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57514 = EDGE_CURVE ( 'NONE', #49449, #77471, #48500, .T. ) ; +#57515 = EDGE_CURVE ( 'NONE', #54900, #35301, #34078, .T. ) ; +#57516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57517 = EDGE_CURVE ( 'NONE', #52661, #66973, #19630, .T. ) ; +#57518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57519 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 44.37738371066728100, -28.70555803802997700 ) ) ; +#57520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57521 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 41.67701665379221500, -28.20555803802997400 ) ) ; +#57522 = CARTESIAN_POINT ( 'NONE', ( 16.56790757632391500, 44.37072804553902500, -28.58363361004981600 ) ) ; +#57523 = FACE_OUTER_BOUND ( 'NONE', #70843, .T. ) ; +#57524 = AXIS2_PLACEMENT_3D ( 'NONE', #58859, #9055, #15361 ) ; +#57525 = VERTEX_POINT ( 'NONE', #21245 ) ; +#57526 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818910400, 59.94924284854708700, -28.20555803802997700 ) ) ; +#57527 = ORIENTED_EDGE ( 'NONE', *, *, #68809, .F. ) ; +#57528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57529 = ORIENTED_EDGE ( 'NONE', *, *, #60255, .F. ) ; +#57530 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59406, #53129, #9335, #22143, #65679, #28437, #71925, #34664, #78173, #40899, #3617, #47125, #9892, #53410 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -2.000000444445062400E-005, 0.0003853527406680782400, 0.0007907054857806070900, 0.001601410976005648900, 0.003222821956455756900, 0.004844232936905864100, 0.006465643917355970800 ), + .UNSPECIFIED. ) ; +#57531 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#57532 = ORIENTED_EDGE ( 'NONE', *, *, #78118, .T. ) ; +#57533 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57534 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252732000, 18.13131911501820400, -28.51286550264586600 ) ) ; +#57535 = FACE_OUTER_BOUND ( 'NONE', #62056, .T. ) ; +#57536 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#57537 = AXIS2_PLACEMENT_3D ( 'NONE', #64384, #27097, #70584 ) ; +#57538 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 14.05000000000000400, -28.20555803802992800 ) ) ; +#57539 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50645, #56942, #50905, #13720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.673268521848308600E-017, 0.001179148174663247300 ), + .UNSPECIFIED. ) ; +#57540 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362722800, 67.56528145730220600, -28.66119098264625700 ) ) ; +#57541 = ORIENTED_EDGE ( 'NONE', *, *, #15899, .F. ) ; +#57542 = AXIS2_PLACEMENT_3D ( 'NONE', #32868, #39101, #70119 ) ; +#57543 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310475700, 51.49769010897087200, -28.61774594594330900 ) ) ; +#57544 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57545 = EDGE_LOOP ( 'NONE', ( #14473, #26695, #14923, #50602 ) ) ; +#57546 = CIRCLE ( 'NONE', #62356, 10.00000000000009200 ) ; +#57547 = EDGE_LOOP ( 'NONE', ( #21437, #80138, #51795, #48598 ) ) ; +#57548 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17219, #54471, #29762, #73251 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574896139500E-007, 0.0004669842289003635500 ), + .UNSPECIFIED. ) ; +#57549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57550 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 4.666666666666678500, 1.294441961969997200 ) ) ; +#57551 = AXIS2_PLACEMENT_3D ( 'NONE', #24538, #68051, #30802 ) ; +#57552 = CARTESIAN_POINT ( 'NONE', ( 17.26457816484935000, 38.81692616327257600, -28.44650835714260100 ) ) ; +#57553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57554 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155506100, 75.79999999999967000, -28.20555803803030800 ) ) ; +#57555 = EDGE_CURVE ( 'NONE', #28597, #42918, #5194, .T. ) ; +#57556 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#57557 = ORIENTED_EDGE ( 'NONE', *, *, #53464, .T. ) ; +#57558 = ORIENTED_EDGE ( 'NONE', *, *, #48069, .F. ) ; +#57559 = AXIS2_PLACEMENT_3D ( 'NONE', #11699, #17939, #5429 ) ; +#57560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57561 = ORIENTED_EDGE ( 'NONE', *, *, #16801, .T. ) ; +#57562 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#57563 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465425300, 19.60079448659600100, -28.70555803802994200 ) ) ; +#57564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57565 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31417, #68663, #56408, #19156 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345780200, 0.0008131256040088004900 ), + .UNSPECIFIED. ) ; +#57566 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57567 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880588700, 35.67103694117759000, -28.53160243214819800 ) ) ; +#57568 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#57569 = CONICAL_SURFACE ( 'NONE', #70007, 10.00000000000009400, 0.7853981633974447300 ) ; +#57570 = EDGE_LOOP ( 'NONE', ( #1314, #17826, #70362 ) ) ; +#57571 = ORIENTED_EDGE ( 'NONE', *, *, #28737, .T. ) ; +#57572 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 75.79999999999998300, -28.70555803802997700 ) ) ; +#57573 = ADVANCED_FACE ( 'NONE', ( #21761 ), #19804, .T. ) ; +#57574 = CONICAL_SURFACE ( 'NONE', #62545, 10.00000000000009200, 0.7853981633974447300 ) ; +#57575 = ORIENTED_EDGE ( 'NONE', *, *, #23532, .F. ) ; +#57576 = ORIENTED_EDGE ( 'NONE', *, *, #31424, .F. ) ; +#57577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57579 = ORIENTED_EDGE ( 'NONE', *, *, #55685, .T. ) ; +#57580 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537729900, 51.39409401757608000, -28.39369363572381000 ) ) ; +#57581 = ADVANCED_FACE ( 'NONE', ( #42160 ), #67477, .T. ) ; +#57582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57583 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57584 = AXIS2_PLACEMENT_3D ( 'NONE', #55225, #17985, #61524 ) ; +#57585 = FACE_OUTER_BOUND ( 'NONE', #19264, .T. ) ; +#57586 = ADVANCED_FACE ( 'NONE', ( #52876 ), #34400, .T. ) ; +#57587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57588 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#57589 = EDGE_LOOP ( 'NONE', ( #38525, #13613, #80118 ) ) ; +#57590 = CONICAL_SURFACE ( 'NONE', #32718, 10.00000000000009600, 0.7853981633974447300 ) ; +#57591 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385394300, 17.99322649091128300, -28.30799595738858100 ) ) ; +#57592 = EDGE_CURVE ( 'NONE', #8064, #25969, #50890, .T. ) ; +#57593 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 10.50000000000002100, -7.061964498581022400 ) ) ; +#57594 = EDGE_LOOP ( 'NONE', ( #36983, #19297, #13970, #24377 ) ) ; +#57595 = CARTESIAN_POINT ( 'NONE', ( 15.24414149058161900, 9.877929254709192400, -28.70257734043093800 ) ) ; +#57596 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506413300, 31.01912043132477600, -28.30223257055574100 ) ) ; +#57597 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686894100, 90.01994747561586500, -28.24986299608873400 ) ) ; +#57598 = VERTEX_POINT ( 'NONE', #9218 ) ; +#57599 = ORIENTED_EDGE ( 'NONE', *, *, #54277, .F. ) ; +#57600 = EDGE_LOOP ( 'NONE', ( #7303, #10080, #26583 ) ) ; +#57601 = CONICAL_SURFACE ( 'NONE', #37176, 10.50000000000009600, 0.7853981633974500600 ) ; +#57602 = ORIENTED_EDGE ( 'NONE', *, *, #12503, .T. ) ; +#57603 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57604 = CONICAL_SURFACE ( 'NONE', #73785, 10.00000000000009200, 0.7853981633974447300 ) ; +#57605 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725299500, 45.23212903577621100, -28.37244029424745400 ) ) ; +#57606 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57608 = ORIENTED_EDGE ( 'NONE', *, *, #13260, .T. ) ; +#57609 = PLANE ( 'NONE', #61066 ) ; +#57610 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274707400, 35.05000000000000400, -28.20555803802995200 ) ) ; +#57611 = EDGE_CURVE ( 'NONE', #67634, #78682, #7130, .T. ) ; +#57612 = EDGE_CURVE ( 'NONE', #75603, #49536, #5164, .T. ) ; +#57613 = CIRCLE ( 'NONE', #64403, 10.00000000000009400 ) ; +#57614 = ORIENTED_EDGE ( 'NONE', *, *, #14136, .T. ) ; +#57615 = VERTEX_POINT ( 'NONE', #59284 ) ; +#57616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1482, #20016, #51213, #14012 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775793403900, 0.0009605145132142252300 ), + .UNSPECIFIED. ) ; +#57617 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103300, 89.94924284854707300, -28.20555803802997700 ) ) ; +#57618 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540434000, 79.08026449164337600, -28.70555803802997400 ) ) ; +#57619 = AXIS2_PLACEMENT_3D ( 'NONE', #15611, #52569, #59112 ) ; +#57620 = EDGE_CURVE ( 'NONE', #4132, #57143, #46067, .T. ) ; +#57621 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 30.74660241562181900, -28.20555803802995200 ) ) ; +#57622 = EDGE_CURVE ( 'NONE', #62129, #51058, #71487, .T. ) ; +#57623 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540443800, 82.51973550835661800, -28.70555803802997400 ) ) ; +#57624 = EDGE_CURVE ( 'NONE', #53345, #52338, #57027, .T. ) ; +#57625 = EDGE_CURVE ( 'NONE', #74194, #55877, #58737, .T. ) ; +#57626 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57628 = ORIENTED_EDGE ( 'NONE', *, *, #27515, .T. ) ; +#57629 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618500, 70.79999999999967000, -28.55171188418405800 ) ) ; +#57630 = VERTEX_POINT ( 'NONE', #72100 ) ; +#57631 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 54.16666666666666400, -6.205558038030004800 ) ) ; +#57632 = AXIS2_PLACEMENT_3D ( 'NONE', #34186, #77693, #40432 ) ; +#57633 = AXIS2_PLACEMENT_3D ( 'NONE', #63292, #26029, #69509 ) ; +#57634 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298136500, 65.79999999999968500, -28.70555803803030800 ) ) ; +#57635 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 81.25732391202375000, -28.20555803803014400 ) ) ; +#57636 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 19.16666666666666400, -9.205558038030003900 ) ) ; +#57637 = FACE_OUTER_BOUND ( 'NONE', #48404, .T. ) ; +#57638 = ORIENTED_EDGE ( 'NONE', *, *, #24152, .F. ) ; +#57639 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 41.44069092601379400, -28.35186440610858600 ) ) ; +#57640 = CIRCLE ( 'NONE', #36795, 10.00000000000009200 ) ; +#57641 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 71.22294471194862800, -28.20555803802997700 ) ) ; +#57642 = VERTEX_POINT ( 'NONE', #53295 ) ; +#57643 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57645 = FACE_OUTER_BOUND ( 'NONE', #26718, .T. ) ; +#57646 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 56.50000000000002800, 6.847000845227641200 ) ) ; +#57647 = ORIENTED_EDGE ( 'NONE', *, *, #69290, .F. ) ; +#57648 = ORIENTED_EDGE ( 'NONE', *, *, #33200, .F. ) ; +#57649 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857148900, 81.52858243452072900, -28.70555803803030800 ) ) ; +#57650 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#57651 = AXIS2_PLACEMENT_3D ( 'NONE', #42113, #4869, #48365 ) ; +#57652 = EDGE_CURVE ( 'NONE', #38513, #63404, #42536, .T. ) ; +#57653 = CONICAL_SURFACE ( 'NONE', #12410, 10.00000000000009400, 0.7853981633974447300 ) ; +#57654 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312778200, 30.99769010897088600, -28.61774594593774500 ) ) ; +#57655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57656 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48303, #73102, #29888, #73370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460908817572200E-007, 0.0008482521192574834100 ), + .UNSPECIFIED. ) ; +#57658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57660 = ORIENTED_EDGE ( 'NONE', *, *, #29997, .T. ) ; +#57661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57662 = CIRCLE ( 'NONE', #37339, 9.500000000000095900 ) ; +#57663 = EDGE_LOOP ( 'NONE', ( #36676, #62660, #5521 ) ) ; +#57664 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782499500, 51.43945992495499600, -28.34042301926905000 ) ) ; +#57666 = EDGE_CURVE ( 'NONE', #59252, #74017, #28130, .T. ) ; +#57665 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41033, #66335, #72599, #35347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108137200, 0.0006040461757766279600 ), + .UNSPECIFIED. ) ; +#57667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57668 = ORIENTED_EDGE ( 'NONE', *, *, #12254, .T. ) ; +#57669 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851264700, 46.50238095238065500, -28.70555803802996700 ) ) ; +#57670 = AXIS2_PLACEMENT_3D ( 'NONE', #22839, #72373, #72630 ) ; +#57671 = ORIENTED_EDGE ( 'NONE', *, *, #36856, .T. ) ; +#57672 = AXIS2_PLACEMENT_3D ( 'NONE', #34602, #40836, #3556 ) ; +#57673 = ORIENTED_EDGE ( 'NONE', *, *, #25345, .T. ) ; +#57674 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#57675 = CONICAL_SURFACE ( 'NONE', #41845, 10.00000000000009200, 0.7853981633974415100 ) ; +#57676 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57677 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#57678 = ORIENTED_EDGE ( 'NONE', *, *, #58293, .T. ) ; +#57679 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70788, #27309, #2499, #46016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259792450400E-007, 0.0004559721492004691100 ), + .UNSPECIFIED. ) ; +#57680 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310471400, 49.60230989102910800, -28.61774594594331600 ) ) ; +#57681 = CARTESIAN_POINT ( 'NONE', ( -1.705837858217821500, 35.04999999999999700, -28.37136602294610200 ) ) ; +#57682 = ADVANCED_FACE ( 'NONE', ( #36334 ), #53573, .T. ) ; +#57683 = CIRCLE ( 'NONE', #14317, 10.00000000000009200 ) ; +#57684 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760600, 21.02620220503713400, -28.70555803802994200 ) ) ; +#57685 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999568800, 61.61077422949649200, -28.37255355648642700 ) ) ; +#57686 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57688 = VERTEX_POINT ( 'NONE', #53831 ) ; +#57687 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43282, #31085, #49786, #12581 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402419200 ), + .UNSPECIFIED. ) ; +#57689 = ORIENTED_EDGE ( 'NONE', *, *, #32748, .F. ) ; +#57690 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57691 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#57692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57693 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 60.00000000000002100, -1.205558038030005300 ) ) ; +#57694 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57695 = CONICAL_SURFACE ( 'NONE', #64884, 10.00000000000009200, 0.7853981633974447300 ) ; +#57696 = ORIENTED_EDGE ( 'NONE', *, *, #28228, .T. ) ; +#57697 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195923300, 22.65857157145701000, -28.37229765499279600 ) ) ; +#57698 = FACE_OUTER_BOUND ( 'NONE', #51515, .T. ) ; +#57699 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 51.68929190448859900, -28.20555803803030800 ) ) ; +#57700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57701 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57702 = AXIS2_PLACEMENT_3D ( 'NONE', #11054, #79322, #48266 ) ; +#57703 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 90.34267608797601700, -28.20555803803030800 ) ) ; +#57704 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 26.44142842854297000, -28.20555803802994200 ) ) ; +#57705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57706 = ADVANCED_FACE ( 'NONE', ( #3229 ), #80126, .T. ) ; +#57707 = EDGE_CURVE ( 'NONE', #39291, #30244, #13659, .T. ) ; +#57708 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#57709 = ORIENTED_EDGE ( 'NONE', *, *, #15309, .T. ) ; +#57710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28576, #46989, #41041, #3760 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191238692100E-007, 0.0006649560044143968800 ), + .UNSPECIFIED. ) ; +#57711 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189800, 17.73827450271713600, -28.47230003642276600 ) ) ; +#57712 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ; +#57713 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 25.16666666666668200, -3.349151577478988200 ) ) ; +#57714 = CARTESIAN_POINT ( 'NONE', ( -12.52766439985163800, 23.59761904761934300, -28.70555803802994200 ) ) ; +#57715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11929, #49148, #18170, #61714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.688072698881470600E-017, 0.001043664170964410300 ), + .UNSPECIFIED. ) ; +#57716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#57717 = ORIENTED_EDGE ( 'NONE', *, *, #42599, .T. ) ; +#57718 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#57719 = CIRCLE ( 'NONE', #6875, 9.500000000000095900 ) ; +#57720 = ORIENTED_EDGE ( 'NONE', *, *, #22835, .F. ) ; +#57721 = CIRCLE ( 'NONE', #24784, 9.500000000000099500 ) ; +#57722 = EDGE_CURVE ( 'NONE', #20135, #9694, #17859, .T. ) ; +#57723 = ORIENTED_EDGE ( 'NONE', *, *, #30892, .F. ) ; +#57724 = CARTESIAN_POINT ( 'NONE', ( -17.01424819686885200, 60.01994747561639800, -28.24986299608865200 ) ) ; +#57725 = VERTEX_POINT ( 'NONE', #16402 ) ; +#57726 = CONICAL_SURFACE ( 'NONE', #67349, 10.00000000000009200, 0.7853981633974415100 ) ; +#57727 = EDGE_CURVE ( 'NONE', #13063, #6036, #79969, .T. ) ; +#57728 = ORIENTED_EDGE ( 'NONE', *, *, #7092, .T. ) ; +#57729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57730 = ORIENTED_EDGE ( 'NONE', *, *, #42479, .F. ) ; +#57731 = VERTEX_POINT ( 'NONE', #16666 ) ; +#57732 = CARTESIAN_POINT ( 'NONE', ( 15.78330646519587600, 60.79999999999999000, -28.32841359973438200 ) ) ; +#57733 = EDGE_CURVE ( 'NONE', #16391, #31548, #65529, .T. ) ; +#57734 = CONICAL_SURFACE ( 'NONE', #333, 10.50000000000009800, 0.7853981633974518300 ) ; +#57735 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 87.94142842854310500, -28.20555803802997700 ) ) ; +#57736 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, -3.499999999999996000, 6.847000845227646500 ) ) ; +#57737 = CIRCLE ( 'NONE', #6066, 10.00000000000009400 ) ; +#57738 = EDGE_CURVE ( 'NONE', #33380, #43201, #50986, .T. ) ; +#57739 = ORIENTED_EDGE ( 'NONE', *, *, #68231, .T. ) ; +#57740 = FACE_OUTER_BOUND ( 'NONE', #50670, .T. ) ; +#57741 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#57742 = ORIENTED_EDGE ( 'NONE', *, *, #28381, .T. ) ; +#57743 = EDGE_LOOP ( 'NONE', ( #16526, #47557, #18562 ) ) ; +#57744 = ORIENTED_EDGE ( 'NONE', *, *, #35910, .T. ) ; +#57745 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57746 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.23796787468678800, -28.38801640354855500 ) ) ; +#57747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57749 = ORIENTED_EDGE ( 'NONE', *, *, #32264, .F. ) ; +#57750 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734516700, 60.27440177985786100, -28.29986836858040900 ) ) ; +#57751 = FACE_OUTER_BOUND ( 'NONE', #212, .T. ) ; +#57752 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832100, 81.25732391202397800, -28.20555803802997700 ) ) ; +#57753 = AXIS2_PLACEMENT_3D ( 'NONE', #67346, #36326, #42568 ) ; +#57755 = ORIENTED_EDGE ( 'NONE', *, *, #37490, .F. ) ; +#57754 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846310500, 80.79999999999998300, -28.55171188418376400 ) ) ; +#57756 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#57757 = EDGE_CURVE ( 'NONE', #29074, #28144, #36551, .T. ) ; +#57758 = EDGE_CURVE ( 'NONE', #62498, #42194, #22117, .T. ) ; +#57759 = ADVANCED_FACE ( 'NONE', ( #15895 ), #30515, .T. ) ; +#57760 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 9.940690926013784800, -28.35186440610855700 ) ) ; +#57761 = ORIENTED_EDGE ( 'NONE', *, *, #59657, .T. ) ; +#57762 = AXIS2_PLACEMENT_3D ( 'NONE', #71901, #34636, #78146 ) ; +#57763 = ORIENTED_EDGE ( 'NONE', *, *, #11046, .F. ) ; +#57764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57765 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 31.00000000000002500, -6.205558038030003100 ) ) ; +#57766 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404300, 28.42298334620739900, -28.20555803802994500 ) ) ; +#57767 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57768 = ORIENTED_EDGE ( 'NONE', *, *, #41141, .F. ) ; +#57769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5151, #48635, #67443, #30210 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.341771812940338300E-018, 0.001179148174662903400 ), + .UNSPECIFIED. ) ; +#57770 = CONICAL_SURFACE ( 'NONE', #5464, 10.50000000000009600, 0.7853981633974500600 ) ; +#57771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57772 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841389500, 39.16349705304865800, -28.30782889147481300 ) ) ; +#57773 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57774 = CARTESIAN_POINT ( 'NONE', ( -9.881082274201251200, 71.10238820582981100, -28.32098513914462100 ) ) ; +#57775 = EDGE_CURVE ( 'NONE', #30160, #2388, #63602, .T. ) ; +#57776 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#57777 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#57778 = ADVANCED_FACE ( 'NONE', ( #32435 ), #61657, .T. ) ; +#57779 = CARTESIAN_POINT ( 'NONE', ( 12.68596550977853900, 14.05000000000020000, -28.37321477197657100 ) ) ; +#57780 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 70.24722181384565500, -28.70555803802999500 ) ) ; +#57781 = AXIS2_PLACEMENT_3D ( 'NONE', #27516, #58499, #64781 ) ; +#57782 = CARTESIAN_POINT ( 'NONE', ( -5.216693534804153200, 80.79999999999999700, -28.32841359973439000 ) ) ; +#57783 = AXIS2_PLACEMENT_3D ( 'NONE', #18880, #43861, #6632 ) ; +#57784 = CARTESIAN_POINT ( 'NONE', ( -9.219797288041370100, 42.59027028261149200, -28.70555803803067400 ) ) ; +#57785 = CARTESIAN_POINT ( 'NONE', ( -9.716823492901133000, 28.56267502090524600, -28.41043597897440500 ) ) ; +#57786 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#57787 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57788 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75477, #56701, #936, #44416 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003326095576560275900, 0.003631405919786761400 ), + .UNSPECIFIED. ) ; +#57789 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#57790 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#57791 = CONICAL_SURFACE ( 'NONE', #45024, 10.50000000000009600, 0.7853981633974518300 ) ; +#57792 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853689300, 51.25732391202355800, -28.20555803803030800 ) ) ; +#57793 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#57794 = ADVANCED_FACE ( 'NONE', ( #47000 ), #28584, .F. ) ; +#57795 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#57796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57798 = ORIENTED_EDGE ( 'NONE', *, *, #3401, .F. ) ; +#57799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57800 = PLANE ( 'NONE', #62230 ) ; +#57801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57802 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74027, #67756, #42978, #5732 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210954000, 0.001517199873936105000 ), + .UNSPECIFIED. ) ; +#57804 = ORIENTED_EDGE ( 'NONE', *, *, #77762, .F. ) ; +#57803 = CARTESIAN_POINT ( 'NONE', ( -16.54352418670957900, 48.94136558227941700, -28.48677465922826700 ) ) ; +#57805 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#57806 = ADVANCED_FACE ( 'NONE', ( #48946 ), #76213, .F. ) ; +#57807 = FACE_OUTER_BOUND ( 'NONE', #43076, .T. ) ; +#57808 = AXIS2_PLACEMENT_3D ( 'NONE', #49490, #12296, #55779 ) ; +#57809 = ORIENTED_EDGE ( 'NONE', *, *, #6382, .F. ) ; +#57810 = CIRCLE ( 'NONE', #37745, 10.00000000000009200 ) ; +#57811 = ORIENTED_EDGE ( 'NONE', *, *, #5421, .F. ) ; +#57812 = CONICAL_SURFACE ( 'NONE', #30334, 10.50000000000009600, 0.7853981633974518300 ) ; +#57813 = CONICAL_SURFACE ( 'NONE', #58589, 10.50000000000009600, 0.7853981633974500600 ) ; +#57814 = ORIENTED_EDGE ( 'NONE', *, *, #55919, .F. ) ; +#57815 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803803001300 ) ) ; +#57816 = VERTEX_POINT ( 'NONE', #30012 ) ; +#57817 = EDGE_LOOP ( 'NONE', ( #7201, #31109, #35673 ) ) ; +#57818 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 2.500000000000011100, -4.865812075874393000 ) ) ; +#57819 = AXIS2_PLACEMENT_3D ( 'NONE', #51205, #69479, #44952 ) ; +#57820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41973, #60505, #10989, #54492 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207974165800E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#57821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57822 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#57823 = EDGE_CURVE ( 'NONE', #46838, #38688, #78189, .T. ) ; +#57824 = CONICAL_SURFACE ( 'NONE', #2336, 10.50000000000009400, 0.7853981633974500600 ) ; +#57825 = ORIENTED_EDGE ( 'NONE', *, *, #66505, .F. ) ; +#57826 = FACE_OUTER_BOUND ( 'NONE', #7410, .T. ) ; +#57827 = AXIS2_PLACEMENT_3D ( 'NONE', #14197, #57705, #20458 ) ; +#57828 = EDGE_LOOP ( 'NONE', ( #23369, #67664, #59972, #69693 ) ) ; +#57829 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526945500, 71.58737389638820000, -28.29936525552472700 ) ) ; +#57830 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57831 = ORIENTED_EDGE ( 'NONE', *, *, #15983, .F. ) ; +#57832 = EDGE_LOOP ( 'NONE', ( #2089, #44554, #49793 ) ) ; +#57833 = VERTEX_POINT ( 'NONE', #73495 ) ; +#57834 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890887700, 60.49763722318498100, -28.32100408376066300 ) ) ; +#57835 = ORIENTED_EDGE ( 'NONE', *, *, #28003, .F. ) ; +#57836 = CONICAL_SURFACE ( 'NONE', #50139, 10.00000000000009600, 0.7853981633974482800 ) ; +#57837 = VERTEX_POINT ( 'NONE', #36232 ) ; +#57838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57840 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#57841 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987500, 51.65075715145281500, -28.20555803802997700 ) ) ; +#57842 = ORIENTED_EDGE ( 'NONE', *, *, #25880, .T. ) ; +#57843 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#57844 = ORIENTED_EDGE ( 'NONE', *, *, #54529, .F. ) ; +#57845 = EDGE_CURVE ( 'NONE', #52338, #32721, #7624, .T. ) ; +#57846 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57847 = ORIENTED_EDGE ( 'NONE', *, *, #28473, .T. ) ; +#57848 = CYLINDRICAL_SURFACE ( 'NONE', #10117, 10.00000000000000000 ) ; +#57849 = EDGE_CURVE ( 'NONE', #6036, #15598, #73984, .T. ) ; +#57850 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048800, 80.69949493661160000, -28.70555803803030800 ) ) ; +#57851 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 80.07141756547893900, -28.70555803802997700 ) ) ; +#57852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57853 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#57854 = CARTESIAN_POINT ( 'NONE', ( 9.254657264815444200, 10.00380841767821100, -28.64142799534453600 ) ) ; +#57855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#57856 = EDGE_CURVE ( 'NONE', #34020, #79164, #59522, .T. ) ; +#57857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5944, #80192, #12202, #55682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572329740300E-007, 0.0004669842289003199100 ), + .UNSPECIFIED. ) ; +#57858 = ADVANCED_FACE ( 'NONE', ( #1282 ), #26612, .T. ) ; +#57859 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57860 = EDGE_CURVE ( 'NONE', #13553, #48573, #44996, .T. ) ; +#57861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57862 = AXIS2_PLACEMENT_3D ( 'NONE', #76044, #20046, #69792 ) ; +#57863 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 8.333333333333344600, 2.794441961969998300 ) ) ; +#57864 = FACE_OUTER_BOUND ( 'NONE', #45602, .T. ) ; +#57865 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#57866 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#57867 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091595100, 27.02574874835210400, -28.70555803803001300 ) ) ; +#57868 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769035900, 50.28860447109612900, -28.53900456328628400 ) ) ; +#57869 = ORIENTED_EDGE ( 'NONE', *, *, #16646, .F. ) ; +#57870 = ADVANCED_FACE ( 'NONE', ( #65566 ), #74295, .T. ) ; +#57871 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57873 = ORIENTED_EDGE ( 'NONE', *, *, #70171, .F. ) ; +#57872 = EDGE_CURVE ( 'NONE', #13600, #58205, #30604, .T. ) ; +#57874 = EDGE_CURVE ( 'NONE', #35314, #45995, #43119, .T. ) ; +#57875 = EDGE_CURVE ( 'NONE', #39293, #53406, #10045, .T. ) ; +#57876 = EDGE_LOOP ( 'NONE', ( #13706, #32894, #124 ) ) ; +#57877 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433000, 22.66464174796073300, -28.53896444442198500 ) ) ; +#57878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8475, #45727, #58274, #21033 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690562570100E-007, 0.0007331055842534731400 ), + .UNSPECIFIED. ) ; +#57879 = CIRCLE ( 'NONE', #3646, 5.000000000000000900 ) ; +#57880 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528700, 24.54999999999997600, -28.20555803802994200 ) ) ; +#57881 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274726500, 45.54999999999998300, -28.20555803802996700 ) ) ; +#57882 = CONICAL_SURFACE ( 'NONE', #17410, 10.50000000000009600, 0.7853981633974500600 ) ; +#57883 = ORIENTED_EDGE ( 'NONE', *, *, #35405, .T. ) ; +#57884 = AXIS2_PLACEMENT_3D ( 'NONE', #36088, #67087, #5055 ) ; +#57885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57886 = ADVANCED_FACE ( 'NONE', ( #59699 ), #859, .T. ) ; +#57887 = ORIENTED_EDGE ( 'NONE', *, *, #69993, .F. ) ; +#57888 = CONICAL_SURFACE ( 'NONE', #30785, 10.50000000000009600, 0.7853981633974500600 ) ; +#57889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57890 = CONICAL_SURFACE ( 'NONE', #50701, 10.50000000000009600, 0.7853981633974500600 ) ; +#57892 = VERTEX_POINT ( 'NONE', #13414 ) ; +#57891 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 31.46823913367203900, -28.70555803802996700 ) ) ; +#57893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57894 = EDGE_CURVE ( 'NONE', #60477, #62677, #11994, .T. ) ; +#57895 = ORIENTED_EDGE ( 'NONE', *, *, #1826, .F. ) ; +#57896 = AXIS2_PLACEMENT_3D ( 'NONE', #38313, #1067, #44537 ) ; +#57897 = AXIS2_PLACEMENT_3D ( 'NONE', #77518, #46745, #65323 ) ; +#57898 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70997, #27514, #8955, #52470 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025930300, 0.0006251342085520851700 ), + .UNSPECIFIED. ) ; +#57899 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820188500, 81.51741414369118400, -28.27509349209130500 ) ) ; +#57900 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#57901 = ADVANCED_FACE ( 'NONE', ( #13952 ), #55755, .T. ) ; +#57902 = FACE_OUTER_BOUND ( 'NONE', #67197, .T. ) ; +#57903 = VERTEX_POINT ( 'NONE', #26188 ) ; +#57904 = FACE_OUTER_BOUND ( 'NONE', #6628, .T. ) ; +#57905 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57906 = ORIENTED_EDGE ( 'NONE', *, *, #40653, .T. ) ; +#57907 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#57908 = EDGE_LOOP ( 'NONE', ( #67469, #64016, #33386 ) ) ; +#57909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40318, #21595, #52832, #15589 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003632803484388639800, 0.0005093674608222848900 ), + .UNSPECIFIED. ) ; +#57910 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .F. ) ; +#57911 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571397700, 80.07141756547891000, -28.70555803802997700 ) ) ; +#57912 = VERTEX_POINT ( 'NONE', #75929 ) ; +#57913 = ADVANCED_FACE ( 'NONE', ( #72355 ), #22697, .T. ) ; +#57914 = CONICAL_SURFACE ( 'NONE', #25661, 10.00000000000009400, 0.7853981633974447300 ) ; +#57915 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 52.00000000000000000, 3.794441961969998300 ) ) ; +#57916 = ORIENTED_EDGE ( 'NONE', *, *, #40726, .F. ) ; +#57917 = ORIENTED_EDGE ( 'NONE', *, *, #75367, .F. ) ; +#57918 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#57919 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57920 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4026, #78587, #35075, #10294 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047509519900E-007, 0.0003301033223275573800 ), + .UNSPECIFIED. ) ; +#57921 = PLANE ( 'NONE', #22990 ) ; +#57922 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 17.00000000000001400, 6.794441961969995200 ) ) ; +#57923 = ORIENTED_EDGE ( 'NONE', *, *, #10931, .T. ) ; +#57924 = ORIENTED_EDGE ( 'NONE', *, *, #46359, .F. ) ; +#57925 = AXIS2_PLACEMENT_3D ( 'NONE', #77859, #40581, #3312 ) ; +#57926 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466625000, 30.26893971291459100, -28.57333386111660900 ) ) ; +#57927 = ORIENTED_EDGE ( 'NONE', *, *, #41750, .T. ) ; +#57928 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919000, 24.55000000000000100, -28.65220501466659500 ) ) ; +#57929 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#57930 = FACE_OUTER_BOUND ( 'NONE', #59531, .T. ) ; +#57931 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 54.33333333333333600, -10.73183747965883100 ) ) ; +#57932 = CARTESIAN_POINT ( 'NONE', ( 5.216693534804065300, 80.79999999999982700, -28.32841359973454900 ) ) ; +#57933 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 70.34267608797598800, -28.20555803802997700 ) ) ; +#57934 = AXIS2_PLACEMENT_3D ( 'NONE', #17992, #32152, #18263 ) ; +#57935 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57936 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#57937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57938 = AXIS2_PLACEMENT_3D ( 'NONE', #1210, #38714, #1480 ) ; +#57939 = FACE_OUTER_BOUND ( 'NONE', #38757, .T. ) ; +#57940 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 15.70389005397398900, -28.37519436813175800 ) ) ; +#57941 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910400, 76.76150692817282100, -28.68631150211663100 ) ) ; +#57942 = CARTESIAN_POINT ( 'NONE', ( 11.46986311118992000, 9.146957350529865100, -28.66910751791844400 ) ) ; +#57943 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57944 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285718000, 57.92318720225497900, -28.70555803802997700 ) ) ; +#57945 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 71.96823913367204300, -28.70555803802997700 ) ) ; +#57946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57947 = CARTESIAN_POINT ( 'NONE', ( -17.23693278408307700, 50.28642716943459600, -28.45216716783122700 ) ) ; +#57949 = VERTEX_POINT ( 'NONE', #44874 ) ; +#57948 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428614700, 15.92318720225486000, -28.70555803803042500 ) ) ; +#57950 = FACE_OUTER_BOUND ( 'NONE', #60869, .T. ) ; +#57951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57952 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#57953 = CARTESIAN_POINT ( 'NONE', ( 8.272691540716733600, 55.79999999999999000, -28.53979898350160500 ) ) ; +#57954 = ORIENTED_EDGE ( 'NONE', *, *, #38181, .F. ) ; +#57955 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76952, #27748, #71235, #33976 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465984701400E-007, 0.0004435563144346812600 ), + .UNSPECIFIED. ) ; +#57956 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 80.51916201875612000, -28.45106778992441600 ) ) ; +#57957 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#57958 = CONICAL_SURFACE ( 'NONE', #55715, 10.50000000000009600, 0.7853981633974500600 ) ; +#57959 = CONICAL_SURFACE ( 'NONE', #13735, 10.50000000000009600, 0.7853981633974500600 ) ; +#57961 = EDGE_CURVE ( 'NONE', #27352, #68176, #16124, .T. ) ; +#57960 = EDGE_LOOP ( 'NONE', ( #75690, #63667, #12490, #7931 ) ) ; +#57962 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 57.83333333333331400, 0.9380355014189731800 ) ) ; +#57963 = EDGE_CURVE ( 'NONE', #10311, #63310, #41178, .T. ) ; +#57964 = CIRCLE ( 'NONE', #17198, 10.00000000000009200 ) ; +#57965 = ORIENTED_EDGE ( 'NONE', *, *, #55129, .T. ) ; +#57966 = ORIENTED_EDGE ( 'NONE', *, *, #70799, .F. ) ; +#57967 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434200, 73.66464174796020400, -28.53896444442245100 ) ) ; +#57968 = ADVANCED_FACE ( 'NONE', ( #39201 ), #53820, .F. ) ; +#57969 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#57970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57971 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57972 = EDGE_CURVE ( 'NONE', #22567, #66277, #1644, .T. ) ; +#57973 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844504500, 66.13383585008156700, -28.37247596307075900 ) ) ; +#57974 = CIRCLE ( 'NONE', #23828, 10.00000000000009200 ) ; +#57975 = EDGE_CURVE ( 'NONE', #69283, #62677, #70353, .T. ) ; +#57976 = CIRCLE ( 'NONE', #65893, 9.500000000000099500 ) ; +#57977 = ORIENTED_EDGE ( 'NONE', *, *, #50072, .F. ) ; +#57978 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 63.43454006867177200, -28.70555803802999500 ) ) ; +#57979 = EDGE_CURVE ( 'NONE', #13532, #19506, #67981, .T. ) ; +#57980 = ORIENTED_EDGE ( 'NONE', *, *, #8373, .T. ) ; +#57981 = ADVANCED_FACE ( 'NONE', ( #8063 ), #4185, .F. ) ; +#57982 = ORIENTED_EDGE ( 'NONE', *, *, #49072, .F. ) ; +#57983 = EDGE_LOOP ( 'NONE', ( #38299, #34975, #15560, #76387, #27913 ) ) ; +#57984 = ORIENTED_EDGE ( 'NONE', *, *, #876, .T. ) ; +#57985 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 50.90050506338822300, -28.70555803802997700 ) ) ; +#57987 = ADVANCED_FACE ( 'NONE', ( #6136 ), #51827, .T. ) ; +#57986 = ORIENTED_EDGE ( 'NONE', *, *, #49572, .T. ) ; +#57988 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 23.00000000000000700, -1.205558038030005300 ) ) ; +#57989 = CARTESIAN_POINT ( 'NONE', ( 2.277608394786526900, 50.54999999999998300, -28.70555803802997000 ) ) ; +#57990 = FACE_OUTER_BOUND ( 'NONE', #71355, .T. ) ; +#57991 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45087, #7860, #63934, #26667 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259789648300E-007, 0.0004559721492008688500 ), + .UNSPECIFIED. ) ; +#57992 = EDGE_LOOP ( 'NONE', ( #5153, #57532, #13594, #74887 ) ) ; +#57993 = AXIS2_PLACEMENT_3D ( 'NONE', #52384, #15161, #58670 ) ; +#57994 = EDGE_CURVE ( 'NONE', #54128, #76471, #68421, .T. ) ; +#57995 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#57996 = EDGE_CURVE ( 'NONE', #26822, #31243, #24640, .T. ) ; +#57997 = EDGE_CURVE ( 'NONE', #43346, #2617, #57719, .T. ) ; +#57998 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217490200, 71.43945992495501700, -28.34042301926910700 ) ) ; +#57999 = ADVANCED_FACE ( 'NONE', ( #20742 ), #49883, .F. ) ; +#58000 = CIRCLE ( 'NONE', #35739, 10.50000000000009600 ) ; +#58001 = AXIS2_PLACEMENT_3D ( 'NONE', #48622, #54897, #5133 ) ; +#58002 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344310900, 38.92298334620755900, -28.20555803802996000 ) ) ; +#58003 = VERTEX_POINT ( 'NONE', #27528 ) ; +#58004 = FACE_OUTER_BOUND ( 'NONE', #15383, .T. ) ; +#58005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21066, #58313, #70810, #33557 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.983217757678558600E-016, 0.001246264537621667400 ), + .UNSPECIFIED. ) ; +#58006 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#58007 = AXIS2_PLACEMENT_3D ( 'NONE', #71142, #2313, #52345 ) ; +#58008 = EDGE_LOOP ( 'NONE', ( #62262, #43653, #64317 ) ) ; +#58009 = AXIS2_PLACEMENT_3D ( 'NONE', #41882, #79183, #54397 ) ; +#58010 = CARTESIAN_POINT ( 'NONE', ( 3.243064933257838500, 71.43482203710632900, -28.29548531138974700 ) ) ; +#58011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58012 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 66.50000000000000000, -7.061964498581022400 ) ) ; +#58013 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 70.16749699759751000, -28.20555803803014400 ) ) ; +#58014 = CIRCLE ( 'NONE', #57925, 10.50000000000009800 ) ; +#58015 = CIRCLE ( 'NONE', #38915, 10.00000000000009200 ) ; +#58016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58017 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473036700, 81.58737389638862700, -28.29936525552441000 ) ) ; +#58018 = PLANE ( 'NONE', #37993 ) ; +#58019 = ORIENTED_EDGE ( 'NONE', *, *, #69503, .F. ) ; +#58020 = CONICAL_SURFACE ( 'NONE', #47782, 10.00000000000009400, 0.7853981633974447300 ) ; +#58021 = AXIS2_PLACEMENT_3D ( 'NONE', #10000, #16267, #47217 ) ; +#58022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58023 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#58024 = ORIENTED_EDGE ( 'NONE', *, *, #65747, .F. ) ; +#58025 = CARTESIAN_POINT ( 'NONE', ( 2.487278546916747800, 81.47860033657568100, -28.56001054660913100 ) ) ; +#58026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46036, #52282, #27594, #71085 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081906236700E-007, 0.001119323292485661300 ), + .UNSPECIFIED. ) ; +#58027 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567151900, 9.746602415621900700, -28.20555803802992800 ) ) ; +#58028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58029 = CARTESIAN_POINT ( 'NONE', ( -24.15704467281182100, 0.8429553271884667700, -23.01012232363660800 ) ) ; +#58030 = FACE_OUTER_BOUND ( 'NONE', #38965, .T. ) ; +#58031 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58032 = CIRCLE ( 'NONE', #61632, 10.50000000000009600 ) ; +#58033 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 28.83333333333335000, 3.794441961969996900 ) ) ; +#58034 = ORIENTED_EDGE ( 'NONE', *, *, #7550, .F. ) ; +#58035 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#58036 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428619100, 10.02858243452102000, -28.70555803802994200 ) ) ; +#58037 = EDGE_CURVE ( 'NONE', #4625, #25647, #2209, .T. ) ; +#58038 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390810400, 34.41466791010177700, -28.53910738522651500 ) ) ; +#58039 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753700, 28.07379779496241300, -28.70555803802994200 ) ) ; +#58040 = AXIS2_PLACEMENT_3D ( 'NONE', #7737, #76550, #70296 ) ; +#58041 = EDGE_LOOP ( 'NONE', ( #71874, #6001, #62737, #72229 ) ) ; +#58042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58043 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846306100, 70.79999999999998300, -28.55171188418376000 ) ) ; +#58044 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#58046 = ORIENTED_EDGE ( 'NONE', *, *, #6741, .T. ) ; +#58045 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58047 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344316200, 28.42298334620755500, -28.20555803802994900 ) ) ; +#58048 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 47.44142842854297000, -28.37229765499281000 ) ) ; +#58049 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 47.44142842854297000, -28.20555803802996700 ) ) ; +#58050 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000044600, 70.16749699759752400, -28.20555803803030800 ) ) ; +#58051 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 71.68929190448859900, -28.20555803803030800 ) ) ; +#58052 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1464, #32222, #7711, #51198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184998900, 0.001517199873936116900 ), + .UNSPECIFIED. ) ; +#58053 = FACE_OUTER_BOUND ( 'NONE', #56648, .T. ) ; +#58054 = PLANE ( 'NONE', #10850 ) ; +#58055 = EDGE_LOOP ( 'NONE', ( #66210, #37241, #50289 ) ) ; +#58056 = AXIS2_PLACEMENT_3D ( 'NONE', #71270, #77520, #27772 ) ; +#58057 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 60.69966441803892100, -28.70555803802997700 ) ) ; +#58058 = ORIENTED_EDGE ( 'NONE', *, *, #19387, .F. ) ; +#58059 = ORIENTED_EDGE ( 'NONE', *, *, #20631, .F. ) ; +#58060 = ORIENTED_EDGE ( 'NONE', *, *, #9851, .F. ) ; +#58061 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 89.77559325427189700, -28.45987523529578700 ) ) ; +#58062 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338512400, 10.10677350908848600, -28.30799595738896500 ) ) ; +#58063 = FACE_OUTER_BOUND ( 'NONE', #59145, .T. ) ; +#58064 = CARTESIAN_POINT ( 'NONE', ( -3.715490959288633800, 92.73594724051950800, -28.65532419784739200 ) ) ; +#58065 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.23796787468678800, -28.38801640354855500 ) ) ; +#58066 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#58067 = VERTEX_POINT ( 'NONE', #77002 ) ; +#58068 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492634400, 49.07379779496234600, -28.70555803802996700 ) ) ; +#58069 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58070 = EDGE_LOOP ( 'NONE', ( #58515, #5496, #55787, #72977 ) ) ; +#58071 = CIRCLE ( 'NONE', #23714, 10.50000000000009600 ) ; +#58072 = EDGE_CURVE ( 'NONE', #74851, #56892, #18779, .T. ) ; +#58073 = ORIENTED_EDGE ( 'NONE', *, *, #66212, .F. ) ; +#58074 = CONICAL_SURFACE ( 'NONE', #19901, 10.00000000000009600, 0.7853981633974447300 ) ; +#58075 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13781, #69497, #63554, #26295, #69771, #32514 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409469300, 0.003857515824818938600 ), + .UNSPECIFIED. ) ; +#58076 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58077 = CIRCLE ( 'NONE', #75677, 10.00000000000009200 ) ; +#58078 = ADVANCED_FACE ( 'NONE', ( #37249 ), #64547, .F. ) ; +#58079 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 0.3333333333333417500, 3.124568980892187500 ) ) ; +#58080 = ORIENTED_EDGE ( 'NONE', *, *, #33609, .F. ) ; +#58081 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658261100, 49.65151454780963300, -28.67627428870437000 ) ) ; +#58082 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58083 = ADVANCED_FACE ( 'NONE', ( #45027 ), #31447, .T. ) ; +#58084 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#58085 = EDGE_CURVE ( 'NONE', #3351, #60061, #47940, .T. ) ; +#58086 = EDGE_CURVE ( 'NONE', #62561, #51526, #16844, .T. ) ; +#58087 = FACE_OUTER_BOUND ( 'NONE', #22278, .T. ) ; +#58088 = ORIENTED_EDGE ( 'NONE', *, *, #24752, .T. ) ; +#58089 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#58090 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58091 = FACE_OUTER_BOUND ( 'NONE', #34430, .T. ) ; +#58092 = EDGE_LOOP ( 'NONE', ( #17097, #55030, #14581 ) ) ; +#58093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58094 = VERTEX_POINT ( 'NONE', #15537 ) ; +#58095 = EDGE_LOOP ( 'NONE', ( #45638, #80369, #62208 ) ) ; +#58096 = CIRCLE ( 'NONE', #48256, 10.00000000000009600 ) ; +#58097 = AXIS2_PLACEMENT_3D ( 'NONE', #75002, #37707, #457 ) ; +#58098 = EDGE_CURVE ( 'NONE', #11933, #78441, #53518, .T. ) ; +#58099 = EDGE_CURVE ( 'NONE', #76501, #28926, #39024, .T. ) ; +#58100 = VERTEX_POINT ( 'NONE', #53037 ) ; +#58101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58102 = EDGE_CURVE ( 'NONE', #29329, #12265, #24601, .T. ) ; +#58103 = CARTESIAN_POINT ( 'NONE', ( 10.12141251449987500, 69.83662311806179400, -28.37223523914900300 ) ) ; +#58104 = ADVANCED_FACE ( 'NONE', ( #66483 ), #65596, .T. ) ; +#58105 = CARTESIAN_POINT ( 'NONE', ( 2.131562220965626700E-013, 68.17143691309389900, -28.36981695106780800 ) ) ; +#58106 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823697100, 21.40456253568401100, -28.61277292027076400 ) ) ; +#58107 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269807800, 90.01262610361141000, -28.29936525552456000 ) ) ; +#58108 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459653000, 69.08026449164327700, -28.70555803803014100 ) ) ; +#58109 = CIRCLE ( 'NONE', #27529, 9.500000000000099500 ) ; +#58110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58111 = CIRCLE ( 'NONE', #77213, 9.500000000000101300 ) ; +#58112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58113 = ORIENTED_EDGE ( 'NONE', *, *, #4144, .T. ) ; +#58114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58115 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#58116 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#58117 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 29.84772751981643100, -28.70555803802999200 ) ) ; +#58118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#58119 = EDGE_LOOP ( 'NONE', ( #60653, #36561, #14915 ) ) ; +#58120 = AXIS2_PLACEMENT_3D ( 'NONE', #12286, #55764, #18525 ) ; +#58121 = AXIS2_PLACEMENT_3D ( 'NONE', #54038, #16807, #60334 ) ; +#58122 = CARTESIAN_POINT ( 'NONE', ( 16.42208926844535500, 28.61339344823292000, -28.58282679407406900 ) ) ; +#58123 = AXIS2_PLACEMENT_3D ( 'NONE', #4621, #73184, #66917 ) ; +#58124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52605, #27920, #71679, #34408 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018277010949300E-007, 0.0007677744771234635000 ), + .UNSPECIFIED. ) ; +#58125 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 80.07141756547859800, -28.70555803803030800 ) ) ; +#58126 = CARTESIAN_POINT ( 'NONE', ( 11.27356422922823500, 7.503450341053878400, -28.41129763681830400 ) ) ; +#58127 = LINE ( 'NONE', #61138, #41581 ) ; +#58128 = ORIENTED_EDGE ( 'NONE', *, *, #21293, .F. ) ; +#58129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58130 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 6.166666666666695400, -3.349151577478988200 ) ) ; +#58131 = VERTEX_POINT ( 'NONE', #34849 ) ; +#58132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58133 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252815100, 20.46868088498121800, -28.51286550264510200 ) ) ; +#58134 = ORIENTED_EDGE ( 'NONE', *, *, #57155, .T. ) ; +#58135 = EDGE_LOOP ( 'NONE', ( #34590, #48136, #62372 ) ) ; +#58136 = ORIENTED_EDGE ( 'NONE', *, *, #29324, .F. ) ; +#58137 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58139 = AXIS2_PLACEMENT_3D ( 'NONE', #33570, #21084, #27344 ) ; +#58141 = EDGE_LOOP ( 'NONE', ( #53917, #78823, #12559, #39 ) ) ; +#58140 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 80.13716795162658000, -28.48697406221668500 ) ) ; +#58142 = EDGE_CURVE ( 'NONE', #23406, #3009, #263, .T. ) ; +#58143 = CARTESIAN_POINT ( 'NONE', ( -10.03178561562175400, 81.31767869357339900, -28.25052235028429900 ) ) ; +#58144 = ORIENTED_EDGE ( 'NONE', *, *, #15190, .T. ) ; +#58145 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58146 = CONICAL_SURFACE ( 'NONE', #11688, 10.00000000000009600, 0.7853981633974482800 ) ; +#58147 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 74.13556610137280200, -28.54207364681942500 ) ) ; +#58148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58149 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#58150 = EDGE_LOOP ( 'NONE', ( #2727, #20913, #63441, #44800 ) ) ; +#58151 = EDGE_CURVE ( 'NONE', #33956, #79585, #10142, .T. ) ; +#58152 = ORIENTED_EDGE ( 'NONE', *, *, #64086, .T. ) ; +#58153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58154 = AXIS2_PLACEMENT_3D ( 'NONE', #21272, #71028, #58520 ) ; +#58155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58156 = FACE_OUTER_BOUND ( 'NONE', #8476, .T. ) ; +#58157 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58158 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58159 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 20.43250300240229200, -28.20555803802995200 ) ) ; +#58160 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263255400, 35.04999999999995500, -28.70555803802995200 ) ) ; +#58161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58163 = EDGE_LOOP ( 'NONE', ( #64630, #69386, #61232, #30105 ) ) ; +#58164 = ADVANCED_FACE ( 'NONE', ( #79134 ), #12942, .T. ) ; +#58165 = FACE_OUTER_BOUND ( 'NONE', #30967, .T. ) ; +#58166 = ORIENTED_EDGE ( 'NONE', *, *, #18778, .F. ) ; +#58168 = CARTESIAN_POINT ( 'NONE', ( 10.22115791441229100, 20.43523632220587800, -28.30315276798565100 ) ) ; +#58167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50167, #56450, #19197, #62729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866776315700E-007, 0.001076778502991249200 ), + .UNSPECIFIED. ) ; +#58169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58170 = ADVANCED_FACE ( 'NONE', ( #35359 ), #41347, .T. ) ; +#58171 = VECTOR ( 'NONE', #59150, 1000.000000000000000 ) ; +#58172 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 49.83333333333332900, -6.205558038030004800 ) ) ; +#58173 = AXIS2_PLACEMENT_3D ( 'NONE', #38064, #537, #75351 ) ; +#58174 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58176 = VERTEX_POINT ( 'NONE', #53861 ) ; +#58177 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 14.83333333333334100, -9.205558038030003900 ) ) ; +#58178 = CARTESIAN_POINT ( 'NONE', ( 3.040268958506426000, 41.37561462481245700, -28.30309985153376200 ) ) ; +#58179 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 15.92318720225497800, -28.70555803802992800 ) ) ; +#58180 = EDGE_CURVE ( 'NONE', #27561, #65338, #45987, .T. ) ; +#58181 = CONICAL_SURFACE ( 'NONE', #40592, 10.00000000000009400, 0.7853981633974447300 ) ; +#58182 = ORIENTED_EDGE ( 'NONE', *, *, #68465, .T. ) ; +#58183 = ADVANCED_FACE ( 'NONE', ( #33370 ), #27547, .T. ) ; +#58184 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 52.16666666666666400, 9.794441961969994300 ) ) ; +#58185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58186 = ORIENTED_EDGE ( 'NONE', *, *, #76975, .T. ) ; +#58187 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#58189 = ADVANCED_FACE ( 'NONE', ( #14881 ), #75211, .F. ) ; +#58190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58191 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925624100, 21.28032162676580100, -28.55467576046954300 ) ) ; +#58192 = CONICAL_SURFACE ( 'NONE', #60862, 10.50000000000009600, 0.7853981633974518300 ) ; +#58193 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#58194 = CIRCLE ( 'NONE', #47967, 10.50000000000009600 ) ; +#58195 = ORIENTED_EDGE ( 'NONE', *, *, #66148, .T. ) ; +#58197 = EDGE_CURVE ( 'NONE', #61916, #5295, #76439, .T. ) ; +#58196 = ORIENTED_EDGE ( 'NONE', *, *, #34526, .T. ) ; +#58198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58199 = ORIENTED_EDGE ( 'NONE', *, *, #58564, .F. ) ; +#58200 = ORIENTED_EDGE ( 'NONE', *, *, #72412, .T. ) ; +#58201 = EDGE_LOOP ( 'NONE', ( #62682, #46033, #62423 ) ) ; +#58202 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 80.90033558196108700, -28.70555803802997700 ) ) ; +#58203 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349247700, 29.20543520232828500, -28.70555803802994200 ) ) ; +#58204 = VERTEX_POINT ( 'NONE', #35647 ) ; +#58205 = VERTEX_POINT ( 'NONE', #79173 ) ; +#58206 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877842100, 30.52667319908789900, -28.37233769390156700 ) ) ; +#58207 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58208 = CARTESIAN_POINT ( 'NONE', ( 15.32689004915725300, 15.19458663502677200, -28.70129965917120900 ) ) ; +#58209 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58210 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164800, 80.90033558196071800, -28.70555803803030800 ) ) ; +#58211 = CARTESIAN_POINT ( 'NONE', ( 16.87500833472984900, 70.01262610361055700, -28.29936525552493600 ) ) ; +#58212 = AXIS2_PLACEMENT_3D ( 'NONE', #17284, #60824, #23538 ) ; +#58213 = ORIENTED_EDGE ( 'NONE', *, *, #63126, .F. ) ; +#58214 = EDGE_CURVE ( 'NONE', #5287, #47101, #62013, .T. ) ; +#58215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58216 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 28.57141756547892100, -28.70555803802994200 ) ) ; +#58217 = EDGE_CURVE ( 'NONE', #42990, #49207, #62567, .T. ) ; +#58218 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533309900, 28.30869142985028800, -28.37223374938521300 ) ) ; +#58219 = FACE_OUTER_BOUND ( 'NONE', #60628, .T. ) ; +#58220 = AXIS2_PLACEMENT_3D ( 'NONE', #23111, #66619, #29399 ) ; +#58221 = ORIENTED_EDGE ( 'NONE', *, *, #35362, .T. ) ; +#58222 = EDGE_LOOP ( 'NONE', ( #60741, #48839, #3781 ) ) ; +#58223 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 55.66666666666667900, -5.205558038030003100 ) ) ; +#58224 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 51.43945992495533700, -28.34042301926881200 ) ) ; +#58225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58226 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17303, #60845, #36078, #79593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.731694791879714500E-017, 0.001707792749031497900 ), + .UNSPECIFIED. ) ; +#58227 = ORIENTED_EDGE ( 'NONE', *, *, #75583, .F. ) ; +#58228 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3362, #40631, #22152, #65686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574777488700E-007, 0.0004669842289003650700 ), + .UNSPECIFIED. ) ; +#58229 = FACE_OUTER_BOUND ( 'NONE', #47726, .T. ) ; +#58230 = AXIS2_PLACEMENT_3D ( 'NONE', #24701, #30964, #12199 ) ; +#58231 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972608900, 72.22511094383847300, -28.55192314908426700 ) ) ; +#58232 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58234 = ORIENTED_EDGE ( 'NONE', *, *, #62172, .F. ) ; +#58233 = AXIS2_PLACEMENT_3D ( 'NONE', #71012, #33760, #77271 ) ; +#58235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58238 = ORIENTED_EDGE ( 'NONE', *, *, #59040, .T. ) ; +#58237 = EDGE_CURVE ( 'NONE', #42646, #40037, #10992, .T. ) ; +#58239 = EDGE_CURVE ( 'NONE', #39561, #43749, #47496, .T. ) ; +#58240 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76779, #39510, #2241, #45737 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210952500, 0.001517199873936110900 ), + .UNSPECIFIED. ) ; +#58241 = AXIS2_PLACEMENT_3D ( 'NONE', #17081, #10817, #60605 ) ; +#58242 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349245500, 50.20543520232829600, -28.70555803802996700 ) ) ; +#58243 = FACE_OUTER_BOUND ( 'NONE', #19413, .T. ) ; +#58244 = EDGE_LOOP ( 'NONE', ( #2465, #76400, #68763 ) ) ; +#58245 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 60.90033558196107300, -28.70555803802997700 ) ) ; +#58246 = ORIENTED_EDGE ( 'NONE', *, *, #32262, .F. ) ; +#58247 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655698900, 28.42298334620753800, -28.20555803802994500 ) ) ; +#58248 = ORIENTED_EDGE ( 'NONE', *, *, #53098, .F. ) ; +#58249 = EDGE_CURVE ( 'NONE', #46424, #73316, #33057, .T. ) ; +#58250 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 20.83333333333333200, 0.9380355014189731800 ) ) ; +#58251 = AXIS2_PLACEMENT_3D ( 'NONE', #56710, #50699, #944 ) ; +#58252 = AXIS2_PLACEMENT_3D ( 'NONE', #77744, #40481, #3210 ) ; +#58253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17652, #54885, #67404, #30188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866823131200E-007, 0.001076778502991277300 ), + .UNSPECIFIED. ) ; +#58254 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58255 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473790800, 17.73827450271187100, -28.47230003642364700 ) ) ; +#58256 = ADVANCED_FACE ( 'NONE', ( #77159 ), #8992, .T. ) ; +#58257 = CIRCLE ( 'NONE', #66133, 10.50000000000009200 ) ; +#58258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58259 = FACE_OUTER_BOUND ( 'NONE', #35977, .T. ) ; +#58260 = ORIENTED_EDGE ( 'NONE', *, *, #46275, .F. ) ; +#58261 = EDGE_LOOP ( 'NONE', ( #78865, #79460, #17963 ) ) ; +#58262 = ADVANCED_FACE ( 'NONE', ( #44023 ), #56706, .T. ) ; +#58263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58265 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59616, #16094, #78095, #22343 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.524738305209347400E-016, 0.001179148174667009700 ), + .UNSPECIFIED. ) ; +#58266 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528430600, 39.13131911501858400, -28.51286550264481800 ) ) ; +#58267 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650641000, 28.58087956867520400, -28.30223257055572400 ) ) ; +#58268 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 64.33333333333334300, 2.794441961969998300 ) ) ; +#58269 = FACE_OUTER_BOUND ( 'NONE', #68214, .T. ) ; +#58270 = VERTEX_POINT ( 'NONE', #17686 ) ; +#58271 = CONICAL_SURFACE ( 'NONE', #10976, 10.00000000000009200, 0.7853981633974415100 ) ; +#58272 = AXIS2_PLACEMENT_3D ( 'NONE', #58652, #77156, #8854 ) ; +#58273 = ORIENTED_EDGE ( 'NONE', *, *, #80255, .F. ) ; +#58274 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 10.11077422949657400, -28.37255355648631300 ) ) ; +#58275 = ORIENTED_EDGE ( 'NONE', *, *, #34761, .F. ) ; +#58276 = VERTEX_POINT ( 'NONE', #67451 ) ; +#58277 = ADVANCED_FACE ( 'NONE', ( #73280 ), #23638, .F. ) ; +#58278 = FACE_OUTER_BOUND ( 'NONE', #26717, .T. ) ; +#58279 = CARTESIAN_POINT ( 'NONE', ( -11.28907588009531400, 7.615022776544383200, -28.44796972294024700 ) ) ; +#58280 = EDGE_LOOP ( 'NONE', ( #50217, #60603, #78056, #72896 ) ) ; +#58281 = ORIENTED_EDGE ( 'NONE', *, *, #24398, .T. ) ; +#58282 = EDGE_LOOP ( 'NONE', ( #12483, #16539, #75578, #63473, #47485 ) ) ; +#58283 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#58284 = ORIENTED_EDGE ( 'NONE', *, *, #50415, .T. ) ; +#58285 = CARTESIAN_POINT ( 'NONE', ( -17.40092861945200700, 81.69271692343123400, -28.41359652401176600 ) ) ; +#58286 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474191500, 10.36172549728281200, -28.47230003642276600 ) ) ; +#58287 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999932500, 15.22261628933229200, -28.70555803803025800 ) ) ; +#58288 = AXIS2_PLACEMENT_3D ( 'NONE', #36661, #24178, #11675 ) ; +#58289 = ORIENTED_EDGE ( 'NONE', *, *, #56183, .T. ) ; +#58290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58291 = ADVANCED_FACE ( 'NONE', ( #25589 ), #29517, .T. ) ; +#58292 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155229900, 55.80000000000015300, -28.20555803803030800 ) ) ; +#58293 = EDGE_CURVE ( 'NONE', #63036, #47960, #60641, .T. ) ; +#58294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58295 = EDGE_LOOP ( 'NONE', ( #76702, #4971, #25590, #67930 ) ) ; +#58296 = CARTESIAN_POINT ( 'NONE', ( -18.90615055831642300, 2.187698883367029000, -24.97820584213195600 ) ) ; +#58297 = CIRCLE ( 'NONE', #11536, 10.00000000000009400 ) ; +#58298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58299 = ORIENTED_EDGE ( 'NONE', *, *, #57034, .T. ) ; +#58300 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 26.66666666666667500, -5.535685056952199400 ) ) ; +#58301 = ORIENTED_EDGE ( 'NONE', *, *, #62538, .T. ) ; +#58302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58303 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#58304 = ORIENTED_EDGE ( 'NONE', *, *, #45201, .F. ) ; +#58305 = ORIENTED_EDGE ( 'NONE', *, *, #8041, .T. ) ; +#58306 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58307 = EDGE_LOOP ( 'NONE', ( #42155, #38664, #67429, #66506 ) ) ; +#58308 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#58309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58310 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715851400, 55.79999999999976300, -28.70525300642641800 ) ) ; +#58311 = CIRCLE ( 'NONE', #49452, 10.00000000000009200 ) ; +#58312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58313 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100939700, 17.62363993080124300, -28.38670679782144300 ) ) ; +#58314 = ADVANCED_FACE ( 'NONE', ( #58653 ), #55185, .T. ) ; +#58315 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#58316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58317 = CARTESIAN_POINT ( 'NONE', ( -4.720904428264018900, 81.50050415885243600, -28.63287458792238000 ) ) ; +#58318 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 9.936502946951316400, -28.30782889147480600 ) ) ; +#58319 = ORIENTED_EDGE ( 'NONE', *, *, #73612, .T. ) ; +#58320 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123094300, 18.78860447109612500, -28.53900456328624100 ) ) ; +#58321 = CARTESIAN_POINT ( 'NONE', ( 1.695197551977157800, 8.955760754971615600, -28.65273796500219200 ) ) ; +#58322 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 10.00000000000000000, -28.70555803803001300 ) ) ; +#58323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58324 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999971000, 53.43454006867090600, -28.70555803803001600 ) ) ; +#58325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58326 = EDGE_CURVE ( 'NONE', #10553, #17490, #18608, .T. ) ; +#58327 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001200, 23.37738371066728500, -28.70555803802995200 ) ) ; +#58328 = FACE_OUTER_BOUND ( 'NONE', #34451, .T. ) ; +#58329 = ORIENTED_EDGE ( 'NONE', *, *, #19612, .T. ) ; +#58330 = EDGE_CURVE ( 'NONE', #21983, #68569, #42093, .T. ) ; +#58331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58332 = EDGE_LOOP ( 'NONE', ( #62023, #74540, #13059, #77205 ) ) ; +#58333 = CARTESIAN_POINT ( 'NONE', ( 4.780202711957540100, 17.00972971738994100, -28.70555803802993100 ) ) ; +#58334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58335 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965577100, 10.17701665379167200, -28.20555803803009500 ) ) ; +#58336 = CARTESIAN_POINT ( 'NONE', ( -4.627647533476960900, 94.50078697889557600, -28.27843125503092700 ) ) ; +#58337 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58338 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#58339 = EDGE_CURVE ( 'NONE', #42271, #10423, #4145, .T. ) ; +#58340 = EDGE_CURVE ( 'NONE', #7944, #77640, #40151, .T. ) ; +#58341 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #14153, #63940, #70157, #32892 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.577209620058479100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9984777913445870300, 0.9984777913445870300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#58342 = AXIS2_PLACEMENT_3D ( 'NONE', #2816, #58862, #40090 ) ; +#58343 = CIRCLE ( 'NONE', #54066, 10.00000000000009400 ) ; +#58344 = FACE_OUTER_BOUND ( 'NONE', #64243, .T. ) ; +#58345 = ORIENTED_EDGE ( 'NONE', *, *, #55516, .T. ) ; +#58346 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 70.33333333333334300, -8.133761268305512700 ) ) ; +#58347 = EDGE_LOOP ( 'NONE', ( #12734, #51, #38927, #56259 ) ) ; +#58348 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22682, #35211, #53938, #16693 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520702600, 0.004414519045340991800 ), + .UNSPECIFIED. ) ; +#58349 = EDGE_CURVE ( 'NONE', #14521, #59807, #71301, .T. ) ; +#58350 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#58351 = EDGE_CURVE ( 'NONE', #74910, #73156, #7050, .T. ) ; +#58352 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819633000, 51.65075715145291500, -28.20555803803005900 ) ) ; +#58353 = EDGE_CURVE ( 'NONE', #64564, #21527, #70451, .T. ) ; +#58354 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 46.96443389862715600, -28.54207364681942500 ) ) ; +#58355 = AXIS2_PLACEMENT_3D ( 'NONE', #1164, #63211, #44631 ) ; +#58356 = FACE_OUTER_BOUND ( 'NONE', #54530, .T. ) ; +#58357 = ORIENTED_EDGE ( 'NONE', *, *, #54984, .F. ) ; +#58358 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58359 = CONICAL_SURFACE ( 'NONE', #3072, 10.00000000000009400, 0.7853981633974447300 ) ; +#58360 = EDGE_LOOP ( 'NONE', ( #55384, #73961, #52881 ) ) ; +#58361 = ORIENTED_EDGE ( 'NONE', *, *, #64675, .T. ) ; +#58362 = AXIS2_PLACEMENT_3D ( 'NONE', #64608, #27343, #70820 ) ; +#58363 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145279100, 79.73198281203376300, -28.34169759783722100 ) ) ; +#58364 = FACE_OUTER_BOUND ( 'NONE', #38957, .T. ) ; +#58365 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 81.43650294695132200, -28.30782889147482400 ) ) ; +#58366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76231, #51434, #70237, #32981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066681692467717800E-007, 0.0004318395898544924500 ), + .UNSPECIFIED. ) ; +#58367 = ORIENTED_EDGE ( 'NONE', *, *, #1308, .T. ) ; +#58368 = ORIENTED_EDGE ( 'NONE', *, *, #22665, .F. ) ; +#58369 = ORIENTED_EDGE ( 'NONE', *, *, #52497, .F. ) ; +#58370 = EDGE_LOOP ( 'NONE', ( #47963, #14844, #44237 ) ) ; +#58371 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58372 = ORIENTED_EDGE ( 'NONE', *, *, #55299, .F. ) ; +#58374 = ORIENTED_EDGE ( 'NONE', *, *, #61062, .F. ) ; +#58373 = EDGE_CURVE ( 'NONE', #35472, #11933, #55991, .T. ) ; +#58375 = ADVANCED_FACE ( 'NONE', ( #21691 ), #12778, .T. ) ; +#58376 = AXIS2_PLACEMENT_3D ( 'NONE', #42983, #74031, #80260 ) ; +#58377 = ORIENTED_EDGE ( 'NONE', *, *, #18749, .F. ) ; +#58378 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43507, #3, #49753, #12536 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207926220000E-007, 0.0008724366121409686400 ), + .UNSPECIFIED. ) ; +#58379 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 81.43945992495501700, -28.34042301926910000 ) ) ; +#58380 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58381 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58382 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428600, 22.67681279774500400, -28.70555803802995200 ) ) ; +#58383 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 41.66666666666667100, 4.294441961969993400 ) ) ; +#58384 = PLANE ( 'NONE', #52488 ) ; +#58385 = FACE_OUTER_BOUND ( 'NONE', #64018, .T. ) ; +#58387 = EDGE_LOOP ( 'NONE', ( #45121, #54598, #69127 ) ) ; +#58386 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537349100, 61.25732391202402700, -28.20555803802997700 ) ) ; +#58388 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148430000, 15.00238095238089100, -28.70555803803009500 ) ) ; +#58389 = ORIENTED_EDGE ( 'NONE', *, *, #57474, .F. ) ; +#58390 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58391 = ORIENTED_EDGE ( 'NONE', *, *, #3217, .T. ) ; +#58392 = ADVANCED_FACE ( 'NONE', ( #69342 ), #3148, .T. ) ; +#58393 = ORIENTED_EDGE ( 'NONE', *, *, #68452, .T. ) ; +#58394 = ORIENTED_EDGE ( 'NONE', *, *, #52892, .T. ) ; +#58395 = VERTEX_POINT ( 'NONE', #43988 ) ; +#58396 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#58397 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465696200, 70.94992009694571800, -28.43638873268704600 ) ) ; +#58398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58399 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455562200, 89.72166103827331100, -28.53892303408224500 ) ) ; +#58400 = ADVANCED_FACE ( 'NONE', ( #36265 ), #50817, .T. ) ; +#58401 = CONICAL_SURFACE ( 'NONE', #2976, 10.00000000000009200, 0.7853981633974447300 ) ; +#58402 = ORIENTED_EDGE ( 'NONE', *, *, #32847, .F. ) ; +#58403 = ORIENTED_EDGE ( 'NONE', *, *, #37274, .T. ) ; +#58404 = ADVANCED_FACE ( 'NONE', ( #38183 ), #17783, .T. ) ; +#58405 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 35.04999999999997600, -28.20555803802995200 ) ) ; +#58406 = AXIS2_PLACEMENT_3D ( 'NONE', #1267, #44753, #7517 ) ; +#58407 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 4.000000000000003600, -1.205558038030005300 ) ) ; +#58408 = FACE_OUTER_BOUND ( 'NONE', #50111, .T. ) ; +#58409 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#58410 = ORIENTED_EDGE ( 'NONE', *, *, #48121, .T. ) ; +#58411 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580930900, 27.36736912940424600, -28.67620115463453000 ) ) ; +#58412 = ORIENTED_EDGE ( 'NONE', *, *, #29078, .T. ) ; +#58413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58414 = ORIENTED_EDGE ( 'NONE', *, *, #60754, .T. ) ; +#58415 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615369000, 80.79999999999998300, -28.55171188418376400 ) ) ; +#58416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58417 = AXIS2_PLACEMENT_3D ( 'NONE', #42014, #48255, #35785 ) ; +#58418 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58419 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43690, #193, #12742, #56219 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284225800, 0.0006028148015507083100 ), + .UNSPECIFIED. ) ; +#58420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58421 = EDGE_CURVE ( 'NONE', #4131, #24911, #19728, .T. ) ; +#58422 = CARTESIAN_POINT ( 'NONE', ( 17.03244381443376900, 88.39936314726203600, -28.49841021997935900 ) ) ; +#58423 = CARTESIAN_POINT ( 'NONE', ( 12.50184790939081300, 25.18533208989819300, -28.53910738522650400 ) ) ; +#58424 = CONICAL_SURFACE ( 'NONE', #35976, 10.50000000000009600, 0.7853981633974482800 ) ; +#58425 = ORIENTED_EDGE ( 'NONE', *, *, #59261, .F. ) ; +#58426 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194922800, 86.76150692817462600, -28.68631150211662400 ) ) ; +#58427 = EDGE_LOOP ( 'NONE', ( #26224, #57275, #79630 ) ) ; +#58428 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285729500, 26.42318720225497900, -28.70555803802994200 ) ) ; +#58429 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504962000, 49.19228657120673600, -28.53891855579990300 ) ) ; +#58430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58432 = CONICAL_SURFACE ( 'NONE', #49721, 10.50000000000009600, 0.7853981633974500600 ) ; +#58433 = VERTEX_POINT ( 'NONE', #25558 ) ; +#58434 = ORIENTED_EDGE ( 'NONE', *, *, #53798, .T. ) ; +#58435 = EDGE_CURVE ( 'NONE', #80238, #15394, #41541, .T. ) ; +#58436 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732828900, 69.66414768973986300, -28.38420446581343300 ) ) ; +#58437 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.16749699759737200, -28.20555803803025800 ) ) ; +#58438 = FACE_OUTER_BOUND ( 'NONE', #76176, .T. ) ; +#58439 = EDGE_CURVE ( 'NONE', #691, #1906, #34326, .T. ) ; +#58440 = VERTEX_POINT ( 'NONE', #25817 ) ; +#58441 = ORIENTED_EDGE ( 'NONE', *, *, #71093, .T. ) ; +#58443 = ORIENTED_EDGE ( 'NONE', *, *, #78647, .T. ) ; +#58442 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58444 = ORIENTED_EDGE ( 'NONE', *, *, #76975, .F. ) ; +#58445 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 47.66666666666667100, 3.124568980892192800 ) ) ; +#58447 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378051200, 50.77483928597539600, -28.57108397021911700 ) ) ; +#58446 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69325, #7555, #26379, #69856 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446513682000E-007, 0.0002745498510224182400 ), + .UNSPECIFIED. ) ; +#58448 = EDGE_CURVE ( 'NONE', #63226, #75756, #52792, .T. ) ; +#58449 = CARTESIAN_POINT ( 'NONE', ( -11.72076650305797700, 70.09951448976266900, -28.63282631410026700 ) ) ; +#58450 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 12.66666666666667300, 5.722645192245505700 ) ) ; +#58451 = EDGE_CURVE ( 'NONE', #30013, #2305, #5121, .T. ) ; +#58453 = ORIENTED_EDGE ( 'NONE', *, *, #40117, .T. ) ; +#58452 = AXIS2_PLACEMENT_3D ( 'NONE', #34784, #53525, #16278 ) ; +#58454 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 51.43250300240198000, -28.20555803803047800 ) ) ; +#58455 = FACE_OUTER_BOUND ( 'NONE', #61695, .T. ) ; +#58456 = ORIENTED_EDGE ( 'NONE', *, *, #20212, .F. ) ; +#58457 = ORIENTED_EDGE ( 'NONE', *, *, #70257, .F. ) ; +#58458 = EDGE_CURVE ( 'NONE', #38012, #59886, #27098, .T. ) ; +#58459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58460 = ORIENTED_EDGE ( 'NONE', *, *, #5920, .T. ) ; +#58461 = ORIENTED_EDGE ( 'NONE', *, *, #72127, .F. ) ; +#58462 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 50.00000000000002100, -12.20555803803000200 ) ) ; +#58463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12516, #49716, #18761, #62282 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881206271092700E-007, 0.0008724366121410587400 ), + .UNSPECIFIED. ) ; +#58464 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#58465 = ORIENTED_EDGE ( 'NONE', *, *, #25413, .T. ) ; +#58466 = ORIENTED_EDGE ( 'NONE', *, *, #71563, .T. ) ; +#58467 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58468 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58469 = FACE_OUTER_BOUND ( 'NONE', #52617, .T. ) ; +#58470 = AXIS2_PLACEMENT_3D ( 'NONE', #45146, #7911, #51401 ) ; +#58471 = EDGE_LOOP ( 'NONE', ( #22893, #7206, #184, #77497 ) ) ; +#58472 = EDGE_CURVE ( 'NONE', #28330, #63375, #67410, .T. ) ; +#58473 = EDGE_CURVE ( 'NONE', #79077, #3798, #54749, .T. ) ; +#58474 = CARTESIAN_POINT ( 'NONE', ( -12.72730845928327200, 65.79999999999998300, -28.53979898350160500 ) ) ; +#58475 = EDGE_CURVE ( 'NONE', #8615, #49628, #1207, .T. ) ; +#58476 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#58477 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58479 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192690600, 56.80000000000002600, -28.70555803803030800 ) ) ; +#58480 = AXIS2_PLACEMENT_3D ( 'NONE', #2919, #46412, #9162 ) ; +#58481 = CARTESIAN_POINT ( 'NONE', ( -12.14815378900369700, 85.79999999999998300, -28.37148172714570600 ) ) ; +#58482 = CIRCLE ( 'NONE', #44070, 10.50000000000009600 ) ; +#58483 = ORIENTED_EDGE ( 'NONE', *, *, #61712, .F. ) ; +#58484 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944359200, 41.79955846777004100, -28.38339015421975400 ) ) ; +#58485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58486 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#58487 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#58488 = CARTESIAN_POINT ( 'NONE', ( -3.778842085587709800, 20.43523632220588100, -28.30315276798564700 ) ) ; +#58489 = EDGE_CURVE ( 'NONE', #61108, #51373, #12631, .T. ) ; +#58490 = CARTESIAN_POINT ( 'NONE', ( 7.759189055763032500, 50.55000000000001100, -28.47662666514797200 ) ) ; +#58491 = ADVANCED_FACE ( 'NONE', ( #15816 ), #32843, .T. ) ; +#58492 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #68572, #12832 ) ; +#58493 = CARTESIAN_POINT ( 'NONE', ( 16.02235059838247700, 50.55000000000000400, -28.65316072681825700 ) ) ; +#58494 = AXIS2_PLACEMENT_3D ( 'NONE', #20274, #63810, #26555 ) ; +#58495 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.16749699759769500, -28.20555803802997700 ) ) ; +#58496 = ADVANCED_FACE ( 'NONE', ( #32356 ), #45041, .T. ) ; +#58497 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846544800, 30.10079448659600500, -28.70555803802995200 ) ) ; +#58498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58500 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 53.50000000000002800, 4.650848422521012700 ) ) ; +#58501 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384630600, 70.79999999999998300, -28.55171188418376000 ) ) ; +#58502 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999999700, -28.20555803802997700 ) ) ; +#58503 = VERTEX_POINT ( 'NONE', #20630 ) ; +#58504 = ORIENTED_EDGE ( 'NONE', *, *, #26058, .F. ) ; +#58505 = ORIENTED_EDGE ( 'NONE', *, *, #36269, .F. ) ; +#58506 = CARTESIAN_POINT ( 'NONE', ( 4.469863111190076000, 9.146957350529831400, -28.66910751791844100 ) ) ; +#58507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58508 = AXIS2_PLACEMENT_3D ( 'NONE', #25360, #50324, #13126 ) ; +#58509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58510 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#58511 = ADVANCED_FACE ( 'NONE', ( #48874 ), #78097, .F. ) ; +#58512 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62404, #43860, #62680, #25428, #68917, #31673, #75185, #37897, #634, #44121, #6902, #50375, #13190, #56673, #19418, #62956, #25700, #69182, #31937, #75449, #38153, #905, #44381, #7154, #50657, #13459, #56956, #19701, #63230, #25966, #69447, #32197, #75698, #38413, #1175, #44649, #7421, #50921, #13730, #57216 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000370500, 0.1875000000000558200, 0.2187500000000650300, 0.2343750000000698100, 0.2421875000000722800, 0.2460937500000730500, 0.2480468750000734700, 0.2490234375000734400, 0.2500000000000733900, 0.3750000000000688300, 0.4375000000000665000, 0.4687500000000656700, 0.4843750000000652800, 0.4921875000000650600, 0.4960937500000646700, 0.4980468750000645000, 0.5000000000000642800, 0.6250000000000502900, 0.6875000000000430800, 0.7187500000000390800, 0.7343750000000368600, 0.7500000000000345300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#58513 = FACE_OUTER_BOUND ( 'NONE', #11254, .T. ) ; +#58514 = AXIS2_PLACEMENT_3D ( 'NONE', #62243, #24962, #68483 ) ; +#58515 = ORIENTED_EDGE ( 'NONE', *, *, #16046, .F. ) ; +#58516 = ORIENTED_EDGE ( 'NONE', *, *, #47448, .F. ) ; +#58518 = EDGE_CURVE ( 'NONE', #56108, #10766, #30442, .T. ) ; +#58517 = ORIENTED_EDGE ( 'NONE', *, *, #30289, .T. ) ; +#58519 = CIRCLE ( 'NONE', #38540, 10.50000000000009600 ) ; +#58520 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58521 = ORIENTED_EDGE ( 'NONE', *, *, #67093, .T. ) ; +#58522 = AXIS2_PLACEMENT_3D ( 'NONE', #64556, #76751, #14755 ) ; +#58523 = VERTEX_POINT ( 'NONE', #33126 ) ; +#58524 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116448100, 41.39435118792235400, -28.41114655922301700 ) ) ; +#58525 = ORIENTED_EDGE ( 'NONE', *, *, #75048, .T. ) ; +#58526 = ORIENTED_EDGE ( 'NONE', *, *, #4163, .F. ) ; +#58527 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 18.66666666666667900, -5.205558038030003100 ) ) ; +#58528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58529 = VERTEX_POINT ( 'NONE', #2095 ) ; +#58530 = FACE_OUTER_BOUND ( 'NONE', #9894, .T. ) ; +#58531 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006700, 20.61077422949657000, -28.37255355648632400 ) ) ; +#58532 = CIRCLE ( 'NONE', #60402, 9.500000000000095900 ) ; +#58533 = AXIS2_PLACEMENT_3D ( 'NONE', #11330, #54814, #17589 ) ; +#58534 = ORIENTED_EDGE ( 'NONE', *, *, #25838, .F. ) ; +#58535 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492448200, 29.20543520232829600, -28.70555803802994200 ) ) ; +#58536 = ORIENTED_EDGE ( 'NONE', *, *, #40817, .T. ) ; +#58537 = ORIENTED_EDGE ( 'NONE', *, *, #38179, .F. ) ; +#58538 = ORIENTED_EDGE ( 'NONE', *, *, #69403, .F. ) ; +#58539 = VERTEX_POINT ( 'NONE', #39350 ) ; +#58540 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34210, #46678, #15713, #59218 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.498374721940738900E-018, 0.001246264537621160200 ), + .UNSPECIFIED. ) ; +#58541 = EDGE_LOOP ( 'NONE', ( #25930, #77882, #52505, #76785, #77537 ) ) ; +#58542 = CIRCLE ( 'NONE', #29025, 10.00000000000009400 ) ; +#58543 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890762400, 30.62856921007283300, -28.37063977681168200 ) ) ; +#58544 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58545 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 62.16666666666665000, -3.349151577478988200 ) ) ; +#58546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58548 = EDGE_CURVE ( 'NONE', #46932, #31582, #63531, .T. ) ; +#58549 = CIRCLE ( 'NONE', #23762, 10.00000000000009400 ) ; +#58550 = ORIENTED_EDGE ( 'NONE', *, *, #58475, .T. ) ; +#58551 = EDGE_CURVE ( 'NONE', #24479, #25931, #78961, .T. ) ; +#58552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58553 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252818300, 39.13131911501876200, -28.51286550264508100 ) ) ; +#58554 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537141000, 70.20590598242367300, -28.39369363572355800 ) ) ; +#58555 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#58556 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58557 = EDGE_CURVE ( 'NONE', #79839, #67861, #13877, .T. ) ; +#58558 = ADVANCED_FACE ( 'NONE', ( #80057 ), #76129, .F. ) ; +#58559 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#58560 = CARTESIAN_POINT ( 'NONE', ( -18.37441212950036700, 8.312793935251244500, -28.19902840602271300 ) ) ; +#58561 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#58562 = EDGE_CURVE ( 'NONE', #80791, #9070, #11930, .T. ) ; +#58563 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 24.49999999999999600, 2.454695999814385600 ) ) ; +#58564 = EDGE_CURVE ( 'NONE', #70202, #58909, #61578, .T. ) ; +#58565 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#58566 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 87.94142842854296300, -28.20555803802997700 ) ) ; +#58567 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198588800, 80.90033558196111600, -28.70555803802997700 ) ) ; +#58568 = ORIENTED_EDGE ( 'NONE', *, *, #50931, .T. ) ; +#58569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58570 = ORIENTED_EDGE ( 'NONE', *, *, #72314, .F. ) ; +#58571 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.23796787468681700, -28.38801640354855800 ) ) ; +#58572 = ADVANCED_FACE ( 'NONE', ( #28509 ), #46131, .T. ) ; +#58573 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784445100, 55.79999999999974800, -28.20555803803014400 ) ) ; +#58574 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 28.63131911501876600, -28.51286550264508100 ) ) ; +#58575 = AXIS2_PLACEMENT_3D ( 'NONE', #11413, #54902, #17672 ) ; +#58576 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58577 = EDGE_CURVE ( 'NONE', #2702, #50735, #64519, .T. ) ; +#58578 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#58579 = EDGE_CURVE ( 'NONE', #48103, #53919, #29672, .T. ) ; +#58580 = EDGE_CURVE ( 'NONE', #31022, #39939, #15172, .T. ) ; +#58581 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35293, #72549, #47749, #10518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871337448700E-007, 0.0002930369617398683400 ), + .UNSPECIFIED. ) ; +#58582 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58583 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58584 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#58585 = CIRCLE ( 'NONE', #20001, 10.50000000000009600 ) ; +#58586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58587 = ORIENTED_EDGE ( 'NONE', *, *, #37560, .F. ) ; +#58588 = ORIENTED_EDGE ( 'NONE', *, *, #63625, .T. ) ; +#58589 = AXIS2_PLACEMENT_3D ( 'NONE', #5915, #12174, #43156 ) ; +#58590 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996400, 55.67652461701997200, -28.70555803802997700 ) ) ; +#58591 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013700, 69.83662311806175200, -28.37223523914899600 ) ) ; +#58592 = CIRCLE ( 'NONE', #26581, 10.00000000000009200 ) ; +#58593 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 15.60073525436771100, -28.70555803803009500 ) ) ; +#58594 = ORIENTED_EDGE ( 'NONE', *, *, #61685, .T. ) ; +#58595 = VERTEX_POINT ( 'NONE', #52935 ) ; +#58596 = ORIENTED_EDGE ( 'NONE', *, *, #8257, .T. ) ; +#58597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#58598 = AXIS2_PLACEMENT_3D ( 'NONE', #80165, #24413, #11906 ) ; +#58599 = ORIENTED_EDGE ( 'NONE', *, *, #15791, .T. ) ; +#58600 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#58601 = ORIENTED_EDGE ( 'NONE', *, *, #61239, .F. ) ; +#58602 = AXIS2_PLACEMENT_3D ( 'NONE', #57995, #20737, #64286 ) ; +#58603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58604 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655695300, 10.17701665379238400, -28.20555803802992800 ) ) ; +#58605 = AXIS2_PLACEMENT_3D ( 'NONE', #15369, #58869, #21639 ) ; +#58606 = CONICAL_SURFACE ( 'NONE', #60905, 10.00000000000009200, 0.7853981633974447300 ) ; +#58607 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145279400, 89.73198281203377700, -28.34169759783721800 ) ) ; +#58608 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58609 = ADVANCED_FACE ( 'NONE', ( #46921 ), #74223, .F. ) ; +#58610 = ORIENTED_EDGE ( 'NONE', *, *, #32491, .F. ) ; +#58611 = CONICAL_SURFACE ( 'NONE', #60873, 10.00000000000009400, 0.7853981633974447300 ) ; +#58612 = VERTEX_POINT ( 'NONE', #28253 ) ; +#58613 = ORIENTED_EDGE ( 'NONE', *, *, #75609, .T. ) ; +#58614 = ORIENTED_EDGE ( 'NONE', *, *, #28754, .T. ) ; +#58615 = EDGE_LOOP ( 'NONE', ( #2437, #21490, #55160 ) ) ; +#58616 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#58617 = CIRCLE ( 'NONE', #5402, 10.00000000000009400 ) ; +#58618 = VERTEX_POINT ( 'NONE', #77986 ) ; +#58619 = CIRCLE ( 'NONE', #16951, 10.50000000000009600 ) ; +#58620 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 68.16666666666668600, 6.794441961969992500 ) ) ; +#58621 = AXIS2_PLACEMENT_3D ( 'NONE', #17661, #73686, #36152 ) ; +#58622 = EDGE_CURVE ( 'NONE', #55877, #10560, #26536, .T. ) ; +#58623 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841334100, 80.16349705304836000, -28.30782889147497600 ) ) ; +#58624 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630000, 38.92298334620783600, -28.20555803802995200 ) ) ; +#58625 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58626 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58627 = FACE_OUTER_BOUND ( 'NONE', #51234, .T. ) ; +#58628 = ORIENTED_EDGE ( 'NONE', *, *, #40200, .T. ) ; +#58629 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542300, 39.99920551340399300, -28.70555803802995200 ) ) ; +#58630 = EDGE_CURVE ( 'NONE', #70673, #75104, #44959, .T. ) ; +#58631 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #394, #68682, #43887 ), + ( #6654, #50143, #12933 ), + ( #56426, #19175, #62706 ), + ( #25449, #68938, #31699 ), + ( #75203, #37918, #656 ), + ( #44142, #6926, #50400 ), + ( #13214, #56694, #19447 ), + ( #62978, #25724, #69214 ), + ( #31961, #75471, #38171 ), + ( #930, #44408, #7176 ), + ( #50686, #13482, #56984 ), + ( #19717, #63256, #25993 ), + ( #69474, #32224, #75719 ), + ( #38440, #1198, #44675 ), + ( #7447, #50946, #13756 ), + ( #57240, #19996, #63518 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.454017768442592600, 6.624850229705598900, 6.795682690968605200, 6.966515152231611600, 7.137347613494617900, 7.308180074757624200, 7.649844997283636000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070862519842668900, 1.000000000000000000), + ( 1.000000000000000000, 0.7106018197994478100, 1.000000000000000000), + ( 1.000000000000000000, 0.7239022307452328600, 1.000000000000000000), + ( 1.000000000000000000, 0.7336892744212045700, 1.000000000000000000), + ( 1.000000000000000000, 0.7577950102856320100, 1.000000000000000000), + ( 1.000000000000000000, 0.7720929082910649200, 1.000000000000000000), + ( 1.000000000000000000, 0.8029933245699921700, 1.000000000000000000), + ( 1.000000000000000000, 0.8195831566265597800, 1.000000000000000000), + ( 1.000000000000000000, 0.8529234057494349300, 1.000000000000000000), + ( 1.000000000000000000, 0.8696689623935616200, 1.000000000000000000), + ( 1.000000000000000000, 0.9015157145874095300, 1.000000000000000000), + ( 1.000000000000000000, 0.9166161117414262100, 1.000000000000000000), + ( 1.000000000000000000, 0.9573577968885111900, 1.000000000000000000), + ( 1.000000000000000000, 0.9783458588968424500, 1.000000000000000000), + ( 1.000000000000000000, 0.9896726408988846300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#58632 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 75.79999999999998300, -28.20555803802997700 ) ) ; +#58633 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58635 = CARTESIAN_POINT ( 'NONE', ( -15.05230528786076000, 85.75869881725290600, -28.70545453106903000 ) ) ; +#58636 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274741400, 14.04999999999976300, -28.20555803803009500 ) ) ; +#58637 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285726000, 33.17681279774500100, -28.70555803802996700 ) ) ; +#58638 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972540500, 69.37488905616157800, -28.55192314908420700 ) ) ; +#58639 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 39.50000000000000700, -9.258116921287651700 ) ) ; +#58640 = AXIS2_PLACEMENT_3D ( 'NONE', #54006, #16756, #60300 ) ; +#58641 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390045600, 90.13716795162662300, -28.48697406221649700 ) ) ; +#58642 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708531400, 55.80000000000008200, -28.63843632546336300 ) ) ; +#58643 = VERTEX_POINT ( 'NONE', #15967 ) ; +#58644 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474189800, 41.86172549728279100, -28.47230003642276600 ) ) ; +#58645 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899324100, 20.97636006919908500, -28.38670679782165600 ) ) ; +#58646 = CARTESIAN_POINT ( 'NONE', ( -6.418476861114186200E-014, 22.65857157145693900, -28.20555803802995200 ) ) ; +#58647 = ORIENTED_EDGE ( 'NONE', *, *, #51728, .F. ) ; +#58648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58649 = AXIS2_PLACEMENT_3D ( 'NONE', #67928, #5918, #49387 ) ; +#58650 = ADVANCED_FACE ( 'NONE', ( #9961 ), #7989, .T. ) ; +#58651 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819155100, 61.65075715145276500, -28.20555803803005900 ) ) ; +#58652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#58653 = FACE_OUTER_BOUND ( 'NONE', #13377, .T. ) ; +#58654 = EDGE_LOOP ( 'NONE', ( #43723, #22066, #74172, #10540 ) ) ; +#58655 = VECTOR ( 'NONE', #18024, 1000.000000000000000 ) ; +#58656 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58658 = EDGE_CURVE ( 'NONE', #27817, #36921, #24566, .T. ) ; +#58657 = EDGE_LOOP ( 'NONE', ( #23358, #37328, #15656 ) ) ; +#58659 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 1.833333333333343900, 0.9380355014189731800 ) ) ; +#58660 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.46443389862715600, -28.54207364681941100 ) ) ; +#58661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58662 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58663 = EDGE_LOOP ( 'NONE', ( #46305, #15926, #48362, #76296, #66871 ) ) ; +#58664 = FACE_OUTER_BOUND ( 'NONE', #38292, .T. ) ; +#58665 = ORIENTED_EDGE ( 'NONE', *, *, #78389, .T. ) ; +#58666 = ORIENTED_EDGE ( 'NONE', *, *, #31038, .T. ) ; +#58667 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 80.16054007504463600, -28.34042301926881200 ) ) ; +#58668 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58669 = ADVANCED_FACE ( 'NONE', ( #65486 ), #39119, .F. ) ; +#58670 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58671 = CIRCLE ( 'NONE', #65558, 9.500000000000095900 ) ; +#58672 = CARTESIAN_POINT ( 'NONE', ( -1.705837858217821700, 24.54999999999999700, -28.37136602294609100 ) ) ; +#58673 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10755, #35259, #60542, #23260 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671587833100E-007, 0.0007670610367941799900 ), + .UNSPECIFIED. ) ; +#58674 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58675 = ORIENTED_EDGE ( 'NONE', *, *, #66570, .T. ) ; +#58676 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58678 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#58679 = EDGE_CURVE ( 'NONE', #9036, #77587, #700, .T. ) ; +#58680 = LINE ( 'NONE', #79756, #73297 ) ; +#58681 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 71.43945992495532900, -28.34042301926880500 ) ) ; +#58682 = EDGE_CURVE ( 'NONE', #52219, #58896, #55678, .T. ) ; +#58683 = ORIENTED_EDGE ( 'NONE', *, *, #78374, .F. ) ; +#58684 = ADVANCED_FACE ( 'NONE', ( #72271 ), #70280, .T. ) ; +#58685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50706, #26011, #32241, #75739 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043687900, 0.008406583008691341500 ), + .UNSPECIFIED. ) ; +#58686 = ORIENTED_EDGE ( 'NONE', *, *, #59908, .T. ) ; +#58687 = ORIENTED_EDGE ( 'NONE', *, *, #42837, .T. ) ; +#58688 = FACE_OUTER_BOUND ( 'NONE', #37059, .T. ) ; +#58689 = ORIENTED_EDGE ( 'NONE', *, *, #9843, .T. ) ; +#58690 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19491, #56742, #69259, #32002 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782222300, 0.0004366687057304556000 ), + .UNSPECIFIED. ) ; +#58691 = CONICAL_SURFACE ( 'NONE', #77344, 10.00000000000009200, 0.7853981633974447300 ) ; +#58692 = AXIS2_PLACEMENT_3D ( 'NONE', #20702, #26967, #70445 ) ; +#58693 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 26.44142842854297000, -28.20555803802994200 ) ) ; +#58694 = EDGE_LOOP ( 'NONE', ( #24739, #55171, #69083, #80462 ) ) ; +#58695 = EDGE_CURVE ( 'NONE', #45119, #37510, #67036, .T. ) ; +#58696 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#58697 = EDGE_CURVE ( 'NONE', #59252, #49428, #6070, .T. ) ; +#58698 = CARTESIAN_POINT ( 'NONE', ( -17.37141821671362500, 90.16749699759768100, -28.25056166218020700 ) ) ; +#58699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58700 = ADVANCED_FACE ( 'NONE', ( #41105 ), #20661, .T. ) ; +#58701 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16519, #4258, #23044, #66550 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694472379900E-007, 0.0008724363063896186300 ), + .UNSPECIFIED. ) ; +#58702 = ORIENTED_EDGE ( 'NONE', *, *, #46719, .F. ) ; +#58703 = EDGE_CURVE ( 'NONE', #5327, #54546, #52539, .T. ) ; +#58704 = AXIS2_PLACEMENT_3D ( 'NONE', #57499, #7702, #63511 ) ; +#58705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58706 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58707 = CARTESIAN_POINT ( 'NONE', ( -3.464812346016866900, 9.406791769321907600, -28.68794773163824300 ) ) ; +#58708 = ORIENTED_EDGE ( 'NONE', *, *, #32686, .F. ) ; +#58709 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 11.16666666666668900, 1.741883078712356500 ) ) ; +#58710 = FACE_OUTER_BOUND ( 'NONE', #39688, .T. ) ; +#58711 = CARTESIAN_POINT ( 'NONE', ( -12.88374526358324700, 45.54999999999998300, -28.53994725305377500 ) ) ; +#58712 = CARTESIAN_POINT ( 'NONE', ( -8.851846210996299600, 75.79999999999998300, -28.37148172714571000 ) ) ; +#58713 = ADVANCED_FACE ( 'NONE', ( #53738 ), #68339, .F. ) ; +#58714 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 45.50000000000000700, -4.865812075874393000 ) ) ; +#58715 = AXIS2_PLACEMENT_3D ( 'NONE', #29224, #72705, #35452 ) ; +#58716 = AXIS2_PLACEMENT_3D ( 'NONE', #62461, #49898, #74966 ) ; +#58717 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 10.50000000000002100, -7.061964498581022400 ) ) ; +#58718 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 82.31032580520964400, -28.59353418718925600 ) ) ; +#58719 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 69.60439022488334600, -28.70555803802997700 ) ) ; +#58720 = CONICAL_SURFACE ( 'NONE', #56027, 10.50000000000009600, 0.7853981633974500600 ) ; +#58721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58722 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 47.83333333333334300, 9.794441961969999600 ) ) ; +#58723 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58725 = ORIENTED_EDGE ( 'NONE', *, *, #44468, .F. ) ; +#58726 = AXIS2_PLACEMENT_3D ( 'NONE', #54122, #16888, #60423 ) ; +#58727 = EDGE_CURVE ( 'NONE', #32995, #60477, #38083, .T. ) ; +#58728 = ORIENTED_EDGE ( 'NONE', *, *, #24718, .T. ) ; +#58729 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37628, #74933, #384, #43873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192576721700 ), + .UNSPECIFIED. ) ; +#58730 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105653900, 14.05000000000004900, -28.70555803803009500 ) ) ; +#58731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58732 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .T. ) ; +#58733 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 79.41684396980716100, -28.70555803802999500 ) ) ; +#58734 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#58735 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.60252595950260000, -28.26641963845862500 ) ) ; +#58736 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58737 = CIRCLE ( 'NONE', #55824, 10.00000000000009200 ) ; +#58738 = ORIENTED_EDGE ( 'NONE', *, *, #51237, .F. ) ; +#58739 = FACE_OUTER_BOUND ( 'NONE', #682, .T. ) ; +#58740 = ORIENTED_EDGE ( 'NONE', *, *, #42703, .F. ) ; +#58741 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.65857157145702400, -28.20555803802997700 ) ) ; +#58742 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 90.13716795162659400, -28.48697406221657500 ) ) ; +#58743 = EDGE_CURVE ( 'NONE', #36182, #5753, #23672, .T. ) ; +#58744 = FACE_OUTER_BOUND ( 'NONE', #76854, .T. ) ; +#58745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58746 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725652400, 12.16464174796073600, -28.53896444442197500 ) ) ; +#58747 = AXIS2_PLACEMENT_3D ( 'NONE', #59237, #71486, #15729 ) ; +#58748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58749 = ORIENTED_EDGE ( 'NONE', *, *, #71845, .T. ) ; +#58750 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58751 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#58752 = VERTEX_POINT ( 'NONE', #48278 ) ; +#58753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58755 = ORIENTED_EDGE ( 'NONE', *, *, #3117, .T. ) ; +#58754 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#58756 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714270500, 53.67681279774500800, -28.70555803802997700 ) ) ; +#58757 = CONICAL_SURFACE ( 'NONE', #17520, 10.50000000000009600, 0.7853981633974518300 ) ; +#58758 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#58759 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001400, 61.25489551879176300, -28.37193179497724700 ) ) ; +#58760 = ORIENTED_EDGE ( 'NONE', *, *, #22976, .F. ) ; +#58761 = AXIS2_PLACEMENT_3D ( 'NONE', #48152, #10939, #54429 ) ; +#58762 = CONICAL_SURFACE ( 'NONE', #36774, 10.50000000000009600, 0.7853981633974518300 ) ; +#58763 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 51.33333333333334300, -8.133761268305512700 ) ) ; +#58764 = ORIENTED_EDGE ( 'NONE', *, *, #29175, .T. ) ; +#58765 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528178400, 49.63131911501876200, -28.51286550264510900 ) ) ; +#58766 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 33.63556610137281700, -28.54207364681942500 ) ) ; +#58767 = ORIENTED_EDGE ( 'NONE', *, *, #74882, .F. ) ; +#58768 = ORIENTED_EDGE ( 'NONE', *, *, #41066, .F. ) ; +#58769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58770 = ORIENTED_EDGE ( 'NONE', *, *, #74671, .F. ) ; +#58771 = CONICAL_SURFACE ( 'NONE', #5388, 10.50000000000009600, 0.7853981633974500600 ) ; +#58772 = CARTESIAN_POINT ( 'NONE', ( 4.502075021551499700, 90.99854748491397100, -28.70555803803030800 ) ) ; +#58773 = ADVANCED_FACE ( 'NONE', ( #22616 ), #60846, .T. ) ; +#58774 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269464000, 70.01262610361159500, -28.29936525552457400 ) ) ; +#58775 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 45.66666666666667100, 2.794441961969992100 ) ) ; +#58776 = AXIS2_PLACEMENT_3D ( 'NONE', #60475, #23197, #66715 ) ; +#58777 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58778 = VERTEX_POINT ( 'NONE', #79594 ) ; +#58779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58780 = ORIENTED_EDGE ( 'NONE', *, *, #16663, .T. ) ; +#58781 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 47.66666666666667900, -5.205558038030003100 ) ) ; +#58782 = VERTEX_POINT ( 'NONE', #23567 ) ; +#58783 = ADVANCED_FACE ( 'NONE', ( #37173 ), #18709, .T. ) ; +#58784 = FACE_OUTER_BOUND ( 'NONE', #64736, .T. ) ; +#58785 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#58786 = ADVANCED_FACE ( 'NONE', ( #57637 ), #4104, .T. ) ; +#58787 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 16.50000000000000700, 4.650848422521012700 ) ) ; +#58788 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000023400, 17.41684396980682000, -28.70555803803042500 ) ) ; +#58789 = ADVANCED_FACE ( 'NONE', ( #35280 ), #33294, .F. ) ; +#58790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12466, #49676, #24964, #68485 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697166273400E-007, 0.0008724363063898879400 ), + .UNSPECIFIED. ) ; +#58791 = FACE_OUTER_BOUND ( 'NONE', #23639, .T. ) ; +#58792 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416072200, 29.08874248361071200, -28.53740755999534400 ) ) ; +#58793 = EDGE_CURVE ( 'NONE', #48096, #67861, #49801, .T. ) ; +#58794 = EDGE_LOOP ( 'NONE', ( #72774, #52810, #30184, #65950 ) ) ; +#58795 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 19.83333333333334300, -2.545304000185615800 ) ) ; +#58796 = CARTESIAN_POINT ( 'NONE', ( -10.06455573922502300, 81.50962196508494600, -28.29483400905891700 ) ) ; +#58797 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28489, #9675, #34709, #78221 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722430117000E-007, 0.0002592600401783434900 ), + .UNSPECIFIED. ) ; +#58798 = ORIENTED_EDGE ( 'NONE', *, *, #79498, .T. ) ; +#58799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58800 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 60.00000000000002100, -1.205558038030005300 ) ) ; +#58801 = EDGE_CURVE ( 'NONE', #75742, #24233, #51755, .T. ) ; +#58802 = CIRCLE ( 'NONE', #2096, 10.00000000000009200 ) ; +#58803 = VERTEX_POINT ( 'NONE', #79872 ) ; +#58804 = AXIS2_PLACEMENT_3D ( 'NONE', #50259, #13056, #56536 ) ; +#58805 = CONICAL_SURFACE ( 'NONE', #44994, 10.00000000000009600, 0.7853981633974447300 ) ; +#58806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58807 = EDGE_LOOP ( 'NONE', ( #64971, #12085, #19169, #45138 ) ) ; +#58808 = FACE_OUTER_BOUND ( 'NONE', #62213, .T. ) ; +#58809 = CIRCLE ( 'NONE', #47602, 9.500000000000099500 ) ; +#58810 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 32.92856308690590300, -28.36981695106779700 ) ) ; +#58811 = ORIENTED_EDGE ( 'NONE', *, *, #19975, .F. ) ; +#58812 = CARTESIAN_POINT ( 'NONE', ( -16.19858693502878200, 94.72249899919930300, -28.20555803802997700 ) ) ; +#58813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58814 = EDGE_LOOP ( 'NONE', ( #46491, #57739, #35095 ) ) ; +#58815 = CARTESIAN_POINT ( 'NONE', ( 9.372352466523041800, 94.50078697889557600, -28.27843125503092700 ) ) ; +#58816 = ORIENTED_EDGE ( 'NONE', *, *, #17929, .T. ) ; +#58817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58818 = AXIS2_PLACEMENT_3D ( 'NONE', #4957, #48452, #11242 ) ; +#58819 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31254, #74760, #37454, #221 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.836219262631321200E-017, 0.001043664170964393800 ), + .UNSPECIFIED. ) ; +#58820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58821 = EDGE_CURVE ( 'NONE', #73343, #19234, #9153, .T. ) ; +#58822 = EDGE_CURVE ( 'NONE', #23425, #2291, #75495, .T. ) ; +#58823 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999989200, 19.30000000000000100, -28.70555803802994200 ) ) ; +#58825 = CIRCLE ( 'NONE', #68014, 10.50000000000009600 ) ; +#58824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58826 = ORIENTED_EDGE ( 'NONE', *, *, #4604, .F. ) ; +#58827 = CARTESIAN_POINT ( 'NONE', ( -9.602551912736711200, 90.86668251344247000, -28.60300612529336900 ) ) ; +#58829 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 22.33333333333334600, -3.705558038030004400 ) ) ; +#58828 = FACE_OUTER_BOUND ( 'NONE', #46334, .T. ) ; +#58830 = EDGE_LOOP ( 'NONE', ( #40865, #38828, #13534, #61453, #38467 ) ) ; +#58831 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#58832 = ORIENTED_EDGE ( 'NONE', *, *, #63896, .F. ) ; +#58833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58834 = VERTEX_POINT ( 'NONE', #30647 ) ; +#58835 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 69.77559325427188200, -28.45987523529578700 ) ) ; +#58836 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58837 = ORIENTED_EDGE ( 'NONE', *, *, #14381, .T. ) ; +#58838 = AXIS2_PLACEMENT_3D ( 'NONE', #45332, #8090, #51590 ) ; +#58839 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544433200, 79.72166103827277100, -28.53892303408279200 ) ) ; +#58840 = ORIENTED_EDGE ( 'NONE', *, *, #7642, .F. ) ; +#58841 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462965300, 51.25732391202377200, -28.20555803803014400 ) ) ; +#58842 = EDGE_CURVE ( 'NONE', #8316, #14507, #61071, .T. ) ; +#58843 = PLANE ( 'NONE', #22184 ) ; +#58844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58845 = FACE_OUTER_BOUND ( 'NONE', #31397, .T. ) ; +#58846 = AXIS2_PLACEMENT_3D ( 'NONE', #20880, #51826, #70632 ) ; +#58847 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534558700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#58848 = AXIS2_PLACEMENT_3D ( 'NONE', #47713, #10492, #53986 ) ; +#58849 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542400, 30.10079448659600500, -28.70555803802995200 ) ) ; +#58850 = ORIENTED_EDGE ( 'NONE', *, *, #77819, .F. ) ; +#58851 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58855 = ORIENTED_EDGE ( 'NONE', *, *, #62172, .T. ) ; +#58856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58858 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#58859 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#58860 = ORIENTED_EDGE ( 'NONE', *, *, #34780, .F. ) ; +#58861 = FACE_OUTER_BOUND ( 'NONE', #10736, .T. ) ; +#58862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58863 = AXIS2_PLACEMENT_3D ( 'NONE', #46823, #9582, #3318 ) ; +#58864 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909800, 84.83849307182683200, -28.68631150211663100 ) ) ; +#58865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58866 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 63.65857157145693200, -28.20555803802997700 ) ) ; +#58867 = CARTESIAN_POINT ( 'NONE', ( 15.68514033016294600, 35.05000000000000400, -28.35375031073497000 ) ) ; +#58868 = CARTESIAN_POINT ( 'NONE', ( 3.464812346017064100, 9.406791769321971600, -28.68794773163824600 ) ) ; +#58869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58870 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56897, #13402, #63169, #25906 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647902004200E-007, 0.0007596411030280947600 ), + .UNSPECIFIED. ) ; +#58872 = AXIS2_PLACEMENT_3D ( 'NONE', #31498, #75004, #37709 ) ; +#58873 = CIRCLE ( 'NONE', #12659, 10.00000000000009600 ) ; +#58874 = EDGE_LOOP ( 'NONE', ( #24032, #27728, #65825 ) ) ; +#58875 = ADVANCED_FACE ( 'NONE', ( #66408 ), #47867, .T. ) ; +#58876 = CONICAL_SURFACE ( 'NONE', #23395, 10.00000000000009600, 0.7853981633974447300 ) ; +#58877 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 66.00000000000000000, -9.205558038030005700 ) ) ; +#58878 = AXIS2_PLACEMENT_3D ( 'NONE', #45397, #8148, #51657 ) ; +#58879 = EDGE_LOOP ( 'NONE', ( #46162, #29212, #60262, #49455, #2081, #26817 ) ) ; +#58880 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#58881 = CARTESIAN_POINT ( 'NONE', ( -3.874036235437129200, 9.632690823624765000, -28.36487527072564800 ) ) ; +#58882 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388400, 39.16349705304866500, -28.30782889147481300 ) ) ; +#58883 = ADVANCED_FACE ( 'NONE', ( #2127 ), #14799, .F. ) ; +#58884 = EDGE_CURVE ( 'NONE', #70364, #19665, #31369, .T. ) ; +#58885 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 73.43454006867098400, -28.70555803803024400 ) ) ; +#58886 = CONICAL_SURFACE ( 'NONE', #6753, 10.00000000000009400, 0.7853981633974447300 ) ; +#58887 = CIRCLE ( 'NONE', #70523, 9.500000000000097700 ) ; +#58888 = AXIS2_PLACEMENT_3D ( 'NONE', #27868, #71360, #34095 ) ; +#58889 = ORIENTED_EDGE ( 'NONE', *, *, #11083, .T. ) ; +#58890 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58892 = ORIENTED_EDGE ( 'NONE', *, *, #18270, .F. ) ; +#58893 = CIRCLE ( 'NONE', #32328, 10.00000000000009200 ) ; +#58894 = ORIENTED_EDGE ( 'NONE', *, *, #35829, .F. ) ; +#58895 = CARTESIAN_POINT ( 'NONE', ( -2.042760264136513000, 65.79999999999982700, -28.53819074160794100 ) ) ; +#58896 = VERTEX_POINT ( 'NONE', #68149 ) ; +#58897 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23579, #4784, #36090, #79603 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810910800, 0.0005317208426589115700 ), + .UNSPECIFIED. ) ; +#58898 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116426300, 30.89435118792235000, -28.41114655922300600 ) ) ; +#58899 = ADVANCED_FACE ( 'NONE', ( #59621 ), #45906, .T. ) ; +#58900 = CIRCLE ( 'NONE', #12387, 9.500000000000099500 ) ; +#58901 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528358700, 9.968680884981202100, -28.51286550264501000 ) ) ; +#58902 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 37.33333333333334300, 8.320721403598817300 ) ) ; +#58903 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471852700, 30.96868088498121800, -28.51286550264511600 ) ) ; +#58904 = FACE_OUTER_BOUND ( 'NONE', #21994, .T. ) ; +#58905 = EDGE_LOOP ( 'NONE', ( #49912, #4997, #73816 ) ) ; +#58906 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#58907 = EDGE_CURVE ( 'NONE', #46326, #7754, #62489, .T. ) ; +#58908 = ORIENTED_EDGE ( 'NONE', *, *, #25329, .T. ) ; +#58909 = VERTEX_POINT ( 'NONE', #68414 ) ; +#58911 = EDGE_CURVE ( 'NONE', #30821, #5467, #16751, .T. ) ; +#58910 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7299, #13614, #32345, #75860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001871986839425567000 ), + .UNSPECIFIED. ) ; +#58912 = CARTESIAN_POINT ( 'NONE', ( 11.11893552610875700, 60.49763722318502300, -28.32100408376081200 ) ) ; +#58913 = EDGE_LOOP ( 'NONE', ( #46854, #41548, #44115 ) ) ; +#58914 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58915 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#58916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#58918 = ORIENTED_EDGE ( 'NONE', *, *, #31584, .T. ) ; +#58919 = CONICAL_SURFACE ( 'NONE', #69814, 10.50000000000009600, 0.7853981633974500600 ) ; +#58920 = VERTEX_POINT ( 'NONE', #18647 ) ; +#58921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58922 = EDGE_LOOP ( 'NONE', ( #63267, #26773, #13294, #12273, #54757, #47232, #40182, #28393 ) ) ; +#58923 = EDGE_CURVE ( 'NONE', #67598, #76184, #43036, .T. ) ; +#58924 = CARTESIAN_POINT ( 'NONE', ( 16.90159045905184200, 93.50159045905188300, -28.54307608304602800 ) ) ; +#58925 = EDGE_CURVE ( 'NONE', #40694, #78930, #46536, .T. ) ; +#58926 = ORIENTED_EDGE ( 'NONE', *, *, #71824, .F. ) ; +#58927 = CONICAL_SURFACE ( 'NONE', #38310, 10.50000000000009600, 0.7853981633974518300 ) ; +#58928 = AXIS2_PLACEMENT_3D ( 'NONE', #57466, #20210, #63747 ) ; +#58929 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, -0.3333333333333243800, -5.205558038030003100 ) ) ; +#58930 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 49.65930907398620100, -28.35186440610858900 ) ) ; +#58931 = VERTEX_POINT ( 'NONE', #50149 ) ; +#58932 = CIRCLE ( 'NONE', #67906, 9.500000000000099500 ) ; +#58933 = SURFACE_SIDE_STYLE ('',( #68576 ) ) ; +#58934 = CARTESIAN_POINT ( 'NONE', ( -9.466255859631168300, 91.59999999999999400, -28.70555803802999500 ) ) ; +#58935 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58936 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841387000, 49.66349705304866500, -28.30782889147481600 ) ) ; +#58937 = AXIS2_PLACEMENT_3D ( 'NONE', #78159, #53114, #3604 ) ; +#58938 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#58939 = EDGE_CURVE ( 'NONE', #80466, #691, #29448, .T. ) ; +#58940 = EDGE_CURVE ( 'NONE', #67505, #13616, #32121, .T. ) ; +#58941 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818077900, 79.94924284854685900, -28.20555803802997700 ) ) ; +#58942 = EDGE_CURVE ( 'NONE', #73072, #41714, #17682, .T. ) ; +#58943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58944 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180791100, 59.94924284854687400, -28.20555803802997700 ) ) ; +#58945 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430200, 31.17701665379239600, -28.20555803802996000 ) ) ; +#58946 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#58947 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#58948 = AXIS2_PLACEMENT_3D ( 'NONE', #11815, #55293, #18055 ) ; +#58949 = CIRCLE ( 'NONE', #54804, 9.500000000000099500 ) ; +#58950 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#58951 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#58952 = ORIENTED_EDGE ( 'NONE', *, *, #65157, .F. ) ; +#58953 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#58954 = EDGE_CURVE ( 'NONE', #881, #33376, #3183, .T. ) ; +#58955 = ORIENTED_EDGE ( 'NONE', *, *, #59209, .T. ) ; +#58956 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#58957 = FACE_OUTER_BOUND ( 'NONE', #71538, .T. ) ; +#58958 = AXIS2_PLACEMENT_3D ( 'NONE', #37155, #80704, #43414 ) ; +#58959 = AXIS2_PLACEMENT_3D ( 'NONE', #59746, #22470, #65997 ) ; +#58960 = CARTESIAN_POINT ( 'NONE', ( -16.62514415533942400, 9.187427922330284600, -28.57261973208899500 ) ) ; +#58961 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58962 = EDGE_LOOP ( 'NONE', ( #37892, #80794, #64633, #59449 ) ) ; +#58963 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950492900, 28.19228657120675800, -28.53891855579984200 ) ) ; +#58964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11060, #67084, #73342, #36083 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.057658750885070300E-016, 0.001179148174662843300 ), + .UNSPECIFIED. ) ; +#58965 = ADVANCED_FACE ( 'NONE', ( #64476 ), #27468, .T. ) ; +#58966 = FACE_OUTER_BOUND ( 'NONE', #14582, .T. ) ; +#58967 = FACE_OUTER_BOUND ( 'NONE', #37056, .T. ) ; +#58968 = ORIENTED_EDGE ( 'NONE', *, *, #72061, .T. ) ; +#58969 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344323300, 17.92298334620759800, -28.20555803802994200 ) ) ; +#58970 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 0.0000000000000000000, -18.70555803802999500 ) ) ; +#58971 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 9.000000000000003600, -1.205558038030002800 ) ) ; +#58972 = FACE_OUTER_BOUND ( 'NONE', #5152, .T. ) ; +#58973 = ORIENTED_EDGE ( 'NONE', *, *, #53911, .T. ) ; +#58974 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#58975 = EDGE_LOOP ( 'NONE', ( #39785, #64695, #52502 ) ) ; +#58976 = ADVANCED_FACE ( 'NONE', ( #60556 ), #75136, .F. ) ; +#58977 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 43.33333333333333600, 1.294441961969997200 ) ) ; +#58978 = AXIS2_PLACEMENT_3D ( 'NONE', #80124, #80408, #74165 ) ; +#58979 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58981 = CONICAL_SURFACE ( 'NONE', #47727, 10.50000000000009600, 0.7853981633974518300 ) ; +#58980 = CARTESIAN_POINT ( 'NONE', ( 2.875008334730036800, 70.01262610361114000, -28.29936525552469100 ) ) ; +#58982 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 8.333333333333344600, 2.794441961969998300 ) ) ; +#58983 = CIRCLE ( 'NONE', #73167, 10.50000000000009600 ) ; +#58984 = AXIS2_PLACEMENT_3D ( 'NONE', #16870, #60405, #23133 ) ; +#58985 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58986 = VERTEX_POINT ( 'NONE', #56989 ) ; +#58987 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.16749699759768100, -28.20555803802997700 ) ) ; +#58988 = ORIENTED_EDGE ( 'NONE', *, *, #63623, .F. ) ; +#58989 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148838400, 15.00238095238052300, -28.70555803802992800 ) ) ; +#58990 = EDGE_CURVE ( 'NONE', #37317, #71559, #12875, .T. ) ; +#58991 = ORIENTED_EDGE ( 'NONE', *, *, #15584, .F. ) ; +#58992 = ORIENTED_EDGE ( 'NONE', *, *, #33681, .T. ) ; +#58993 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 45.66666666666667900, -10.73183747965883100 ) ) ; +#58994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#58995 = AXIS2_PLACEMENT_3D ( 'NONE', #6190, #49662, #12453 ) ; +#58996 = ORIENTED_EDGE ( 'NONE', *, *, #48262, .F. ) ; +#58997 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#58998 = CONICAL_SURFACE ( 'NONE', #67796, 10.00000000000009200, 0.7853981633974447300 ) ; +#58999 = FACE_OUTER_BOUND ( 'NONE', #18657, .T. ) ; +#59001 = AXIS2_PLACEMENT_3D ( 'NONE', #14527, #64328, #70540 ) ; +#59000 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11838, #55324, #30619, #74127 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854485400, 0.0007596411030281084200 ), + .UNSPECIFIED. ) ; +#59002 = ORIENTED_EDGE ( 'NONE', *, *, #13466, .T. ) ; +#59003 = CARTESIAN_POINT ( 'NONE', ( 4.035920356936641100, 10.09789380924848800, -28.25343951603368000 ) ) ; +#59004 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428614500, 77.92318720225485200, -28.70555803803047500 ) ) ; +#59005 = ADVANCED_FACE ( 'NONE', ( #79055 ), #25516, .F. ) ; +#59006 = CARTESIAN_POINT ( 'NONE', ( 12.72730845928322900, 75.79999999999950000, -28.53979898350205600 ) ) ; +#59007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59009 = CONICAL_SURFACE ( 'NONE', #30510, 10.00000000000009400, 0.7853981633974447300 ) ; +#59010 = AXIS2_PLACEMENT_3D ( 'NONE', #13924, #57423, #20174 ) ; +#59011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59012 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 39.69949493661176400, -28.70555803802995200 ) ) ; +#59013 = ORIENTED_EDGE ( 'NONE', *, *, #30927, .F. ) ; +#59014 = CONICAL_SURFACE ( 'NONE', #43333, 10.50000000000009600, 0.7853981633974482800 ) ; +#59015 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#59016 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22558, #59836, #72352, #35097 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721824500, 0.0008252574424210017700 ), + .UNSPECIFIED. ) ; +#59017 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 37.16545993132819300, -28.70555803802998100 ) ) ; +#59018 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#59019 = CARTESIAN_POINT ( 'NONE', ( -3.464500224097548700, 9.204283415895382300, -28.67591357691969700 ) ) ; +#59020 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 14.05000000000000600, -28.20555803802992800 ) ) ; +#59021 = CARTESIAN_POINT ( 'NONE', ( 4.745342735184572700, 20.50380841767821500, -28.64142799534454700 ) ) ; +#59022 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#59023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59024 = ORIENTED_EDGE ( 'NONE', *, *, #5303, .T. ) ; +#59025 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59026 = CARTESIAN_POINT ( 'NONE', ( -8.616843969805909600, 74.79999999999820700, -28.70555803802997700 ) ) ; +#59027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59028 = EDGE_CURVE ( 'NONE', #42094, #63100, #69506, .T. ) ; +#59029 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 49.16666666666667900, 6.794441961969992500 ) ) ; +#59030 = LINE ( 'NONE', #29307, #42461 ) ; +#59031 = ORIENTED_EDGE ( 'NONE', *, *, #4220, .T. ) ; +#59032 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900889600, 41.53732497909458500, -28.41043597897467900 ) ) ; +#59033 = EDGE_CURVE ( 'NONE', #43908, #70364, #55044, .T. ) ; +#59034 = CIRCLE ( 'NONE', #11315, 10.00000000000009200 ) ; +#59035 = EDGE_LOOP ( 'NONE', ( #56086, #26716, #65902 ) ) ; +#59036 = FACE_OUTER_BOUND ( 'NONE', #63628, .T. ) ; +#59037 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000900, 40.25227248018354900, -28.70555803802998100 ) ) ; +#59038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59039 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#59040 = EDGE_CURVE ( 'NONE', #67594, #16633, #40580, .T. ) ; +#59041 = ORIENTED_EDGE ( 'NONE', *, *, #24863, .F. ) ; +#59042 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50498, #19816, #1294, #44772 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866806936400E-007, 0.001076778502991281700 ), + .UNSPECIFIED. ) ; +#59043 = CONICAL_SURFACE ( 'NONE', #67655, 10.50000000000009400, 0.7853981633974500600 ) ; +#59044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59045 = VECTOR ( 'NONE', #35032, 1000.000000000000000 ) ; +#59046 = EDGE_CURVE ( 'NONE', #16570, #45282, #26157, .T. ) ; +#59047 = ORIENTED_EDGE ( 'NONE', *, *, #42518, .F. ) ; +#59048 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 49.83333333333335000, 0.9380355014189729600 ) ) ; +#59049 = EDGE_CURVE ( 'NONE', #56739, #16784, #43950, .T. ) ; +#59051 = ORIENTED_EDGE ( 'NONE', *, *, #6953, .T. ) ; +#59050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59052 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 14.33333333333334600, -8.133761268305512700 ) ) ; +#59053 = ORIENTED_EDGE ( 'NONE', *, *, #73373, .F. ) ; +#59054 = CARTESIAN_POINT ( 'NONE', ( 19.89754282002182600, 94.04868818399167200, -27.42438002030513600 ) ) ; +#59055 = AXIS2_PLACEMENT_3D ( 'NONE', #52023, #21071, #20795 ) ; +#59056 = EDGE_CURVE ( 'NONE', #26859, #47370, #11697, .T. ) ; +#59057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59058 = EDGE_CURVE ( 'NONE', #66446, #79995, #77084, .T. ) ; +#59059 = EDGE_CURVE ( 'NONE', #69047, #22570, #77998, .T. ) ; +#59060 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034432500, 31.17701665379225800, -28.20555803802996000 ) ) ; +#59061 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5115, #17651, #36380, #79927 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399031929559100E-007, 0.0009968645831862628200 ), + .UNSPECIFIED. ) ; +#59062 = ADVANCED_FACE ( 'NONE', ( #42018 ), #40079, .F. ) ; +#59063 = CIRCLE ( 'NONE', #19399, 10.00000000000009400 ) ; +#59064 = ORIENTED_EDGE ( 'NONE', *, *, #1567, .F. ) ; +#59065 = AXIS2_PLACEMENT_3D ( 'NONE', #49354, #12145, #55637 ) ; +#59066 = ORIENTED_EDGE ( 'NONE', *, *, #5696, .F. ) ; +#59067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59068 = VERTEX_POINT ( 'NONE', #70552 ) ; +#59069 = EDGE_LOOP ( 'NONE', ( #73419, #49318, #45290 ) ) ; +#59070 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 70.16749699759751000, -28.20555803803014400 ) ) ; +#59071 = CONICAL_SURFACE ( 'NONE', #34928, 10.00000000000009200, 0.7853981633974447300 ) ; +#59072 = ADVANCED_FACE ( 'NONE', ( #73199 ), #6982, .T. ) ; +#59073 = AXIS2_PLACEMENT_3D ( 'NONE', #15298, #58799, #21575 ) ; +#59074 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 17.66666666666667500, 1.294441961969997200 ) ) ; +#59075 = AXIS2_PLACEMENT_3D ( 'NONE', #29079, #72562, #35307 ) ; +#59076 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 81.43945992495534400, -28.34042301926880800 ) ) ; +#59077 = ORIENTED_EDGE ( 'NONE', *, *, #79097, .T. ) ; +#59078 = AXIS2_PLACEMENT_3D ( 'NONE', #37609, #68647, #56122 ) ; +#59079 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#59080 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 57.83333333333331400, 0.9380355014189731800 ) ) ; +#59081 = ORIENTED_EDGE ( 'NONE', *, *, #30339, .F. ) ; +#59082 = FACE_OUTER_BOUND ( 'NONE', #73915, .T. ) ; +#59083 = ADVANCED_FACE ( 'NONE', ( #197 ), #56623, .T. ) ; +#59084 = ORIENTED_EDGE ( 'NONE', *, *, #17993, .F. ) ; +#59085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59086 = CIRCLE ( 'NONE', #17270, 10.50000000000009800 ) ; +#59087 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23416, #48134, #60693, #66942 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184994600, 0.001517199873936112000 ), + .UNSPECIFIED. ) ; +#59088 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 69.81066373133501200, -28.53923937255172300 ) ) ; +#59089 = CARTESIAN_POINT ( 'NONE', ( 17.06581962135453900, 11.00863606381453300, -28.49020639256005400 ) ) ; +#59090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59091 = CIRCLE ( 'NONE', #27223, 10.00000000000009200 ) ; +#59092 = AXIS2_PLACEMENT_3D ( 'NONE', #9039, #52561, #15334 ) ; +#59093 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218850400, 18.67436051799297300, -28.45080305021060200 ) ) ; +#59094 = VERTEX_POINT ( 'NONE', #14793 ) ; +#59095 = ADVANCED_FACE ( 'NONE', ( #23545 ), #21617, .F. ) ; +#59096 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59097 = CARTESIAN_POINT ( 'NONE', ( -3.822344978202968100, 7.660694734812120800, -28.43770179755625800 ) ) ; +#59098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59099 = CONICAL_SURFACE ( 'NONE', #53151, 10.50000000000009600, 0.7853981633974500600 ) ; +#59100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59101 = ORIENTED_EDGE ( 'NONE', *, *, #16500, .F. ) ; +#59102 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999895600, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59103 = EDGE_CURVE ( 'NONE', #2143, #42969, #63561, .T. ) ; +#59104 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#59105 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734546000, 51.32559822014181300, -28.29986836858020300 ) ) ; +#59106 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567159000, 39.35339758437810100, -28.20555803802995200 ) ) ; +#59107 = AXIS2_PLACEMENT_3D ( 'NONE', #70195, #76454, #20454 ) ; +#59108 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274331600, 77.93535825203925100, -28.53896444442201400 ) ) ; +#59109 = EDGE_LOOP ( 'NONE', ( #80171, #69235, #80603 ) ) ; +#59110 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#59111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#59113 = ORIENTED_EDGE ( 'NONE', *, *, #66924, .F. ) ; +#59112 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59114 = FACE_OUTER_BOUND ( 'NONE', #60085, .T. ) ; +#59115 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047300, 18.23237991241892100, -28.26633708900904600 ) ) ; +#59116 = ORIENTED_EDGE ( 'NONE', *, *, #39140, .T. ) ; +#59117 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 28.74722181384564800, -28.70555803802998100 ) ) ; +#59118 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000020400, 51.07757630314360900, -28.53861367218446400 ) ) ; +#59119 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#59120 = AXIS2_PLACEMENT_3D ( 'NONE', #59186, #52916, #46650 ) ; +#59121 = FACE_OUTER_BOUND ( 'NONE', #16855, .T. ) ; +#59122 = ORIENTED_EDGE ( 'NONE', *, *, #65287, .F. ) ; +#59123 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 70.34267608797600200, -28.20555803803030800 ) ) ; +#59124 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#59125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59126 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59127 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#59128 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042459000, 48.50972971738993800, -28.70555803802997400 ) ) ; +#59129 = ORIENTED_EDGE ( 'NONE', *, *, #21769, .T. ) ; +#59130 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59131 = AXIS2_PLACEMENT_3D ( 'NONE', #21579, #65099, #27839 ) ; +#59132 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#59133 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12229, #37216, #12500, #55988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.002386166704003913200 ), + .UNSPECIFIED. ) ; +#59134 = FACE_OUTER_BOUND ( 'NONE', #37770, .T. ) ; +#59135 = CIRCLE ( 'NONE', #7352, 10.00000000000009400 ) ; +#59136 = ORIENTED_EDGE ( 'NONE', *, *, #43323, .F. ) ; +#59137 = ORIENTED_EDGE ( 'NONE', *, *, #20356, .F. ) ; +#59138 = EDGE_CURVE ( 'NONE', #1277, #51473, #49028, .T. ) ; +#59139 = ORIENTED_EDGE ( 'NONE', *, *, #41710, .T. ) ; +#59140 = ORIENTED_EDGE ( 'NONE', *, *, #56769, .T. ) ; +#59141 = EDGE_LOOP ( 'NONE', ( #60230, #47162, #78688 ) ) ; +#59142 = ORIENTED_EDGE ( 'NONE', *, *, #78747, .F. ) ; +#59143 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 19.25227248018307700, -28.70555803803013400 ) ) ; +#59144 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 63.83333333333333600, 6.794441961969992500 ) ) ; +#59145 = EDGE_LOOP ( 'NONE', ( #68998, #32685, #49059 ) ) ; +#59146 = PLANE ( 'NONE', #30977 ) ; +#59147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59148 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59149 = ORIENTED_EDGE ( 'NONE', *, *, #51090, .T. ) ; +#59150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#59151 = FACE_OUTER_BOUND ( 'NONE', #69445, .T. ) ; +#59152 = EDGE_CURVE ( 'NONE', #45068, #49449, #38111, .T. ) ; +#59154 = EDGE_CURVE ( 'NONE', #2995, #37342, #54681, .T. ) ; +#59153 = ORIENTED_EDGE ( 'NONE', *, *, #53439, .F. ) ; +#59155 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#59156 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000008900, 57.07371263207992500, -2.153617569443897000 ) ) ; +#59157 = ORIENTED_EDGE ( 'NONE', *, *, #70162, .F. ) ; +#59158 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 53.65857157145694600, -28.20555803802997700 ) ) ; +#59159 = CIRCLE ( 'NONE', #19331, 9.500000000000099500 ) ; +#59160 = ADVANCED_FACE ( 'NONE', ( #71230 ), #36190, .T. ) ; +#59161 = AXIS2_PLACEMENT_3D ( 'NONE', #30603, #74120, #36819 ) ; +#59162 = EDGE_CURVE ( 'NONE', #14341, #69573, #52712, .T. ) ; +#59163 = EDGE_CURVE ( 'NONE', #78429, #60445, #34625, .T. ) ; +#59164 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 71.56248377813447800, -28.32723995587591800 ) ) ; +#59165 = EDGE_CURVE ( 'NONE', #10564, #19495, #20161, .T. ) ; +#59167 = ORIENTED_EDGE ( 'NONE', *, *, #20331, .T. ) ; +#59166 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655983500, 17.92298334620702600, -28.20555803803002000 ) ) ; +#59168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59170 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 87.46443389862686500, -28.54207364681969800 ) ) ; +#59171 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 35.16666666666667100, -12.20555803803000000 ) ) ; +#59172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59173 = EDGE_CURVE ( 'NONE', #49536, #26239, #5684, .T. ) ; +#59174 = AXIS2_PLACEMENT_3D ( 'NONE', #72637, #60668, #10885 ) ; +#59175 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 88.39962244433174000, -28.53664883431610400 ) ) ; +#59176 = CARTESIAN_POINT ( 'NONE', ( -3.073491842515244400, 70.22161678501181800, -28.29547179040447700 ) ) ; +#59177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59178 = FACE_OUTER_BOUND ( 'NONE', #9600, .T. ) ; +#59179 = EDGE_LOOP ( 'NONE', ( #19484, #32061, #54606 ) ) ; +#59180 = ADVANCED_FACE ( 'NONE', ( #10911 ), #67330, .T. ) ; +#59181 = CARTESIAN_POINT ( 'NONE', ( -16.93949773756162000, 93.53949773756163200, -28.51567264113192500 ) ) ; +#59182 = VERTEX_POINT ( 'NONE', #15872 ) ; +#59183 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#59184 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26495, #7408, #44627, #69955, #32710, #76222 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082580300, 0.004114855318165160600 ), + .UNSPECIFIED. ) ; +#59185 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655983500, 17.92298334620702600, -28.20555803803002000 ) ) ; +#59186 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#59187 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#59188 = ADVANCED_FACE ( 'NONE', ( #69271 ), #34238, .F. ) ; +#59189 = AXIS2_PLACEMENT_3D ( 'NONE', #79915, #11657, #11389 ) ; +#59190 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#59191 = AXIS2_PLACEMENT_3D ( 'NONE', #66584, #23332, #17087 ) ; +#59192 = ADVANCED_FACE ( 'NONE', ( #3079 ), #1122, .F. ) ; +#59193 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998900, 91.59999999999998000, -28.70555803803001300 ) ) ; +#59194 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59195 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344303800, 49.42298334620756600, -28.20555803802996700 ) ) ; +#59196 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714284700, 36.92318720225497200, -28.70555803802995200 ) ) ; +#59197 = FACE_OUTER_BOUND ( 'NONE', #9108, .T. ) ; +#59198 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, -2.499999999999979100, 4.650848422521012700 ) ) ; +#59199 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972482400, 52.22511094383822400, -28.55192314908428800 ) ) ; +#59200 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#59201 = EDGE_LOOP ( 'NONE', ( #54911, #62245, #2535 ) ) ; +#59202 = EDGE_LOOP ( 'NONE', ( #25777, #36031, #17473, #71150 ) ) ; +#59203 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 20.44069092601378700, -28.35186440610856500 ) ) ; +#59204 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#59205 = ORIENTED_EDGE ( 'NONE', *, *, #61472, .F. ) ; +#59206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59207 = AXIS2_PLACEMENT_3D ( 'NONE', #32929, #76440, #39170 ) ; +#59208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59209 = EDGE_CURVE ( 'NONE', #44354, #35472, #17703, .T. ) ; +#59210 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 78.16545993132803000, -28.70555803803024400 ) ) ; +#59211 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528145500, 30.96868088498121800, -28.51286550264512000 ) ) ; +#59212 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#59213 = CONICAL_SURFACE ( 'NONE', #16529, 10.00000000000009400, 0.7853981633974447300 ) ; +#59214 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736722400, 24.54999999999999700, -28.70555803802994200 ) ) ; +#59215 = CONICAL_SURFACE ( 'NONE', #30293, 10.50000000000009600, 0.7853981633974482800 ) ; +#59216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59217 = EDGE_LOOP ( 'NONE', ( #29181, #40488, #377, #26020 ) ) ; +#59218 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 38.92298334620756600, -28.20555803802995200 ) ) ; +#59219 = ORIENTED_EDGE ( 'NONE', *, *, #32424, .F. ) ; +#59220 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148834800, 46.50238095238052000, -28.70555803802996700 ) ) ; +#59221 = ORIENTED_EDGE ( 'NONE', *, *, #24153, .F. ) ; +#59222 = EDGE_CURVE ( 'NONE', #80692, #42984, #19655, .T. ) ; +#59223 = CIRCLE ( 'NONE', #673, 10.00000000000009600 ) ; +#59224 = VERTEX_POINT ( 'NONE', #16147 ) ; +#59225 = ORIENTED_EDGE ( 'NONE', *, *, #79196, .T. ) ; +#59226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59227 = AXIS2_PLACEMENT_3D ( 'NONE', #30043, #17773, #61310 ) ; +#59228 = ORIENTED_EDGE ( 'NONE', *, *, #5068, .T. ) ; +#59229 = ORIENTED_EDGE ( 'NONE', *, *, #19120, .T. ) ; +#59230 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, 26.10073525436786600, -28.70555803802994200 ) ) ; +#59231 = EDGE_LOOP ( 'NONE', ( #73884, #11240, #26162, #2056 ) ) ; +#59232 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 47.44142842854306300, -28.20555803802996700 ) ) ; +#59233 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#59234 = ORIENTED_EDGE ( 'NONE', *, *, #54664, .T. ) ; +#59235 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.23796787468682400, -28.38801640354855800 ) ) ; +#59236 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280447300, 87.94142842854286400, -28.37229765499331800 ) ) ; +#59237 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#59238 = CIRCLE ( 'NONE', #18310, 10.00000000000009400 ) ; +#59239 = AXIS2_PLACEMENT_3D ( 'NONE', #63886, #32580, #26630 ) ; +#59240 = ORIENTED_EDGE ( 'NONE', *, *, #39741, .T. ) ; +#59241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59242 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#59243 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 6.833333333333335700, -4.152999154772353500 ) ) ; +#59244 = VERTEX_POINT ( 'NONE', #3883 ) ; +#59245 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30797, #43003, #43266, #6033 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401247800, 0.004682530427070974800 ), + .UNSPECIFIED. ) ; +#59246 = ORIENTED_EDGE ( 'NONE', *, *, #13845, .T. ) ; +#59247 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59248 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45883, #2379, #8890, #52409 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025110890400, 0.0005411754951807252800 ), + .UNSPECIFIED. ) ; +#59249 = CONICAL_SURFACE ( 'NONE', #77126, 10.00000000000009200, 0.7853981633974447300 ) ; +#59250 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 41.16666666666667100, -2.545304000185620600 ) ) ; +#59251 = AXIS2_PLACEMENT_3D ( 'NONE', #55941, #62231, #49661 ) ; +#59252 = VERTEX_POINT ( 'NONE', #78167 ) ; +#59253 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528145500, 30.96868088498121800, -28.51286550264512000 ) ) ; +#59254 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#59255 = ORIENTED_EDGE ( 'NONE', *, *, #24103, .T. ) ; +#59256 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59257 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 6.166666666666695400, -3.349151577478988200 ) ) ; +#59258 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66628, #10876, #29655, #73168 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251698800, 0.003631405919786719300 ), + .UNSPECIFIED. ) ; +#59259 = PLANE ( 'NONE', #72742 ) ; +#59260 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59261 = EDGE_CURVE ( 'NONE', #70215, #9754, #58585, .T. ) ; +#59262 = CIRCLE ( 'NONE', #31730, 9.500000000000097700 ) ; +#59263 = EDGE_LOOP ( 'NONE', ( #60517, #64377, #21237 ) ) ; +#59264 = CARTESIAN_POINT ( 'NONE', ( 5.332653347308521100, 44.44999999999997400, 4.926396551043571200 ) ) ; +#59265 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507486000, 42.02620220503758500, -28.70555803802999500 ) ) ; +#59266 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 43.50000000000000700, 6.847000845227646500 ) ) ; +#59267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59268 = ORIENTED_EDGE ( 'NONE', *, *, #11156, .F. ) ; +#59269 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#59270 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 80.34267608797603100, -28.20555803802997700 ) ) ; +#59271 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12614, #74367, #68636, #31384 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258657911900, 0.0009376791149928468100 ), + .UNSPECIFIED. ) ; +#59272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59273 = PLANE ( 'NONE', #50448 ) ; +#59274 = EDGE_CURVE ( 'NONE', #26644, #57143, #5036, .T. ) ; +#59275 = CIRCLE ( 'NONE', #46774, 10.50000000000009600 ) ; +#59276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59277 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#59278 = CIRCLE ( 'NONE', #59341, 9.500000000000095900 ) ; +#59279 = CARTESIAN_POINT ( 'NONE', ( 9.279233496941847300, 80.09951448976229900, -28.63282631410065800 ) ) ; +#59280 = EDGE_CURVE ( 'NONE', #63863, #58931, #8910, .T. ) ; +#59281 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#59282 = ORIENTED_EDGE ( 'NONE', *, *, #996, .F. ) ; +#59283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#59285 = VERTEX_POINT ( 'NONE', #28707 ) ; +#59284 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032400, 30.94069092601377900, -28.35186440610858200 ) ) ; +#59286 = CARTESIAN_POINT ( 'NONE', ( 11.72076650305811400, 70.09951448976248400, -28.63282631410048000 ) ) ; +#59287 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59288 = ADVANCED_FACE ( 'NONE', ( #50748 ), #46853, .T. ) ; +#59289 = AXIS2_PLACEMENT_3D ( 'NONE', #5712, #61766, #18228 ) ; +#59290 = ORIENTED_EDGE ( 'NONE', *, *, #55115, .F. ) ; +#59291 = EDGE_CURVE ( 'NONE', #22950, #39513, #63453, .T. ) ; +#59292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44452, #38223, #25493, #7217 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539825900, 0.0007090531776679212400 ), + .UNSPECIFIED. ) ; +#59293 = ADVANCED_FACE ( 'NONE', ( #79987 ), #78026, .F. ) ; +#59294 = FACE_OUTER_BOUND ( 'NONE', #68462, .T. ) ; +#59296 = ORIENTED_EDGE ( 'NONE', *, *, #17475, .T. ) ; +#59295 = EDGE_CURVE ( 'NONE', #52604, #56856, #13807, .T. ) ; +#59297 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#59298 = FACE_OUTER_BOUND ( 'NONE', #58975, .T. ) ; +#59299 = ORIENTED_EDGE ( 'NONE', *, *, #62517, .F. ) ; +#59300 = AXIS2_PLACEMENT_3D ( 'NONE', #70005, #38982, #14267 ) ; +#59301 = ORIENTED_EDGE ( 'NONE', *, *, #48524, .T. ) ; +#59302 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 47.00000000000001400, -9.205558038030005700 ) ) ; +#59303 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 71.43945992495501700, -28.34042301926918800 ) ) ; +#59304 = ORIENTED_EDGE ( 'NONE', *, *, #56769, .F. ) ; +#59305 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.42856308690589600, -28.36981695106780800 ) ) ; +#59306 = CIRCLE ( 'NONE', #1147, 9.500000000000099500 ) ; +#59307 = ORIENTED_EDGE ( 'NONE', *, *, #80518, .T. ) ; +#59308 = ORIENTED_EDGE ( 'NONE', *, *, #41193, .T. ) ; +#59310 = ORIENTED_EDGE ( 'NONE', *, *, #64342, .F. ) ; +#59309 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59311 = ORIENTED_EDGE ( 'NONE', *, *, #58954, .T. ) ; +#59312 = ORIENTED_EDGE ( 'NONE', *, *, #43779, .F. ) ; +#59313 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.43250300240228500, -28.20555803802997700 ) ) ; +#59314 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59316 = ORIENTED_EDGE ( 'NONE', *, *, #26365, .F. ) ; +#59315 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 75.80000000000001100, -28.70555803802997700 ) ) ; +#59317 = AXIS2_PLACEMENT_3D ( 'NONE', #76907, #39640, #2352 ) ; +#59318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59319 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59320 = EDGE_CURVE ( 'NONE', #79578, #40126, #72031, .T. ) ; +#59321 = ADVANCED_FACE ( 'NONE', ( #30364 ), #28435, .T. ) ; +#59322 = EDGE_CURVE ( 'NONE', #78012, #59471, #57548, .T. ) ; +#59323 = AXIS2_PLACEMENT_3D ( 'NONE', #75706, #38421, #1184 ) ; +#59324 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#59325 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .F. ) ; +#59326 = FACE_OUTER_BOUND ( 'NONE', #17958, .T. ) ; +#59327 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#59328 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 52.00000000000001400, -1.205558038030005300 ) ) ; +#59329 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .T. ) ; +#59330 = ORIENTED_EDGE ( 'NONE', *, *, #77652, .F. ) ; +#59331 = EDGE_LOOP ( 'NONE', ( #10913, #2282, #26200, #47254 ) ) ; +#59332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59333 = ORIENTED_EDGE ( 'NONE', *, *, #32101, .F. ) ; +#59334 = EDGE_LOOP ( 'NONE', ( #1918, #40823, #61746, #71138 ) ) ; +#59335 = CIRCLE ( 'NONE', #13530, 10.00000000000009400 ) ; +#59336 = EDGE_CURVE ( 'NONE', #6581, #35408, #43061, .T. ) ; +#59337 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 12.16666666666666400, 6.794441961969992500 ) ) ; +#59338 = CARTESIAN_POINT ( 'NONE', ( 22.47122326939642500, 95.33552048323467400, -25.35493831077813500 ) ) ; +#59339 = AXIS2_PLACEMENT_3D ( 'NONE', #12050, #18026, #48989 ) ; +#59340 = ORIENTED_EDGE ( 'NONE', *, *, #53308, .F. ) ; +#59341 = AXIS2_PLACEMENT_3D ( 'NONE', #53477, #16222, #59748 ) ; +#59342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59343 = PLANE ( 'NONE', #57672 ) ; +#59344 = ORIENTED_EDGE ( 'NONE', *, *, #63096, .F. ) ; +#59345 = CIRCLE ( 'NONE', #7147, 9.500000000000099500 ) ; +#59347 = VERTEX_POINT ( 'NONE', #54730 ) ; +#59346 = CARTESIAN_POINT ( 'NONE', ( -3.221157914412192500, 9.935236322205883000, -28.30315276798566900 ) ) ; +#59348 = ORIENTED_EDGE ( 'NONE', *, *, #70268, .T. ) ; +#59349 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033300, 71.46283204837304500, -28.48697406221691300 ) ) ; +#59350 = ORIENTED_EDGE ( 'NONE', *, *, #25018, .T. ) ; +#59351 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 15.50000000000001100, -4.865812075874393000 ) ) ; +#59352 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656715200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#59353 = CARTESIAN_POINT ( 'NONE', ( 10.72257783544433200, 69.72166103827278500, -28.53892303408279200 ) ) ; +#59354 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 63.65857157145693200, -28.20555803802997700 ) ) ; +#59355 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181873500, 51.65075715145283700, -28.20555803803047800 ) ) ; +#59356 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 55.66666666666667900, -5.205558038030003100 ) ) ; +#59357 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32790, #39027, #64109, #26825 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210960700, 0.001517199873936109800 ), + .UNSPECIFIED. ) ; +#59358 = AXIS2_PLACEMENT_3D ( 'NONE', #46278, #46547, #34080 ) ; +#59359 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#59360 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59361 = CONICAL_SURFACE ( 'NONE', #73875, 10.50000000000009600, 0.7853981633974482800 ) ; +#59362 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881900, 49.66616330387869000, -28.27375072930955500 ) ) ; +#59363 = CIRCLE ( 'NONE', #59833, 10.00000000000009200 ) ; +#59364 = ORIENTED_EDGE ( 'NONE', *, *, #28836, .T. ) ; +#59365 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59367 = CARTESIAN_POINT ( 'NONE', ( 12.53318012365767600, 85.79999999999951400, -28.37307693585110300 ) ) ; +#59368 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 9.932503002402294000, -28.20555803802994200 ) ) ; +#59369 = PLANE ( 'NONE', #59502 ) ; +#59370 = AXIS2_PLACEMENT_3D ( 'NONE', #60051, #72553, #78811 ) ; +#59371 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13850, #51047, #76104, #38821 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0006862403197095262800 ), + .UNSPECIFIED. ) ; +#59372 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59373 = ADVANCED_FACE ( 'NONE', ( #32287 ), #76056, .T. ) ; +#59374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59375 = EDGE_CURVE ( 'NONE', #40807, #48441, #28674, .T. ) ; +#59376 = VECTOR ( 'NONE', #30085, 1000.000000000000000 ) ; +#59377 = ORIENTED_EDGE ( 'NONE', *, *, #77402, .T. ) ; +#59378 = CARTESIAN_POINT ( 'NONE', ( -4.512728101709893900, 71.47860083896993900, -28.56001287362844100 ) ) ; +#59379 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116425400, 30.89435118792235400, -28.41114655922301000 ) ) ; +#59380 = EDGE_LOOP ( 'NONE', ( #26418, #79885, #36733, #40382 ) ) ; +#59381 = AXIS2_PLACEMENT_3D ( 'NONE', #73544, #24040, #5259 ) ; +#59382 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534571600, 18.99920551340398600, -28.70555803802992800 ) ) ; +#59383 = ORIENTED_EDGE ( 'NONE', *, *, #71572, .F. ) ; +#59384 = FACE_OUTER_BOUND ( 'NONE', #56166, .T. ) ; +#59385 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#59386 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13006, #25515, #31758, #75271 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.002676326193402561000 ), + .UNSPECIFIED. ) ; +#59387 = ORIENTED_EDGE ( 'NONE', *, *, #69645, .F. ) ; +#59388 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 70.16054007504466500, -28.34042301926880800 ) ) ; +#59389 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488088700, 61.99560977511647800, -28.70555803803014400 ) ) ; +#59390 = ORIENTED_EDGE ( 'NONE', *, *, #39722, .F. ) ; +#59391 = ORIENTED_EDGE ( 'NONE', *, *, #17739, .T. ) ; +#59392 = ORIENTED_EDGE ( 'NONE', *, *, #68046, .F. ) ; +#59393 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#59394 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825500, 61.93585231025955600, -28.38420446581291400 ) ) ; +#59395 = VERTEX_POINT ( 'NONE', #5243 ) ; +#59396 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59397 = ADVANCED_FACE ( 'NONE', ( #11848 ), #42961, .T. ) ; +#59398 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474187600, 49.23827450271716800, -28.47230003642277300 ) ) ; +#59399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59400 = CARTESIAN_POINT ( 'NONE', ( 4.469863111190076000, 9.146957350529831400, -28.66910751791844100 ) ) ; +#59402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71423, #77680, #3131, #46644 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750182418400, 0.005168056621190063700 ), + .UNSPECIFIED. ) ; +#59401 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.982541115402053100E-015, 0.0000000000000000000 ) ) ; +#59403 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 70.34267608797603100, -28.20555803802997700 ) ) ; +#59404 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59405 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609406800, 71.46283204837340000, -28.48697406221669900 ) ) ; +#59406 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 96.59999999999999400, -18.70555803803001300 ) ) ; +#59407 = CIRCLE ( 'NONE', #23437, 10.50000000000009200 ) ; +#59409 = EDGE_CURVE ( 'NONE', #77938, #33514, #14171, .T. ) ; +#59408 = ORIENTED_EDGE ( 'NONE', *, *, #31763, .F. ) ; +#59410 = CARTESIAN_POINT ( 'NONE', ( 15.57141974618304500, 91.19760305329354800, -28.70555803803002000 ) ) ; +#59411 = ORIENTED_EDGE ( 'NONE', *, *, #46031, .F. ) ; +#59412 = VERTEX_POINT ( 'NONE', #11512 ) ; +#59413 = EDGE_CURVE ( 'NONE', #46068, #44262, #65423, .T. ) ; +#59414 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109251000, 41.12856921007284700, -28.37063977681168200 ) ) ; +#59415 = ORIENTED_EDGE ( 'NONE', *, *, #4637, .T. ) ; +#59416 = ORIENTED_EDGE ( 'NONE', *, *, #26589, .T. ) ; +#59417 = ORIENTED_EDGE ( 'NONE', *, *, #53184, .F. ) ; +#59418 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583922900, 18.58874248361071600, -28.53740755999533700 ) ) ; +#59419 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472500, 24.86071428647299100, -28.36868303842826900 ) ) ; +#59420 = CIRCLE ( 'NONE', #39434, 9.500000000000101300 ) ; +#59421 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59422 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59424 = EDGE_LOOP ( 'NONE', ( #54860, #74182, #14484 ) ) ; +#59425 = EDGE_CURVE ( 'NONE', #41614, #33956, #59539, .T. ) ; +#59426 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59427 = ADVANCED_FACE ( 'NONE', ( #48796 ), #57569, .T. ) ; +#59428 = EDGE_CURVE ( 'NONE', #14833, #21828, #80495, .T. ) ; +#59429 = AXIS2_PLACEMENT_3D ( 'NONE', #79119, #16828, #35600 ) ; +#59430 = FACE_OUTER_BOUND ( 'NONE', #58135, .T. ) ; +#59431 = ORIENTED_EDGE ( 'NONE', *, *, #70836, .T. ) ; +#59432 = ORIENTED_EDGE ( 'NONE', *, *, #73956, .F. ) ; +#59433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#59434 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 61.66666666666668600, -8.133761268305512700 ) ) ; +#59435 = AXIS2_PLACEMENT_3D ( 'NONE', #50779, #13575, #57077 ) ; +#59436 = EDGE_CURVE ( 'NONE', #32445, #50710, #66040, .T. ) ; +#59437 = CARTESIAN_POINT ( 'NONE', ( -3.371507771243966300, 51.43250300240229900, -28.25053031809458700 ) ) ; +#59438 = EDGE_CURVE ( 'NONE', #16869, #58131, #15742, .T. ) ; +#59439 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80278, #5749, #24527, #68037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037045122254491000E-007, 0.0004669856434892170500 ), + .UNSPECIFIED. ) ; +#59440 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59441 = EDGE_CURVE ( 'NONE', #61765, #22658, #51511, .T. ) ; +#59442 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390045600, 90.13716795162662300, -28.48697406221649700 ) ) ; +#59443 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998600, 18.24722181384563800, -28.70555803802997400 ) ) ; +#59444 = AXIS2_PLACEMENT_3D ( 'NONE', #45584, #39356, #51846 ) ; +#59445 = FACE_OUTER_BOUND ( 'NONE', #34169, .T. ) ; +#59446 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#59447 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448972200, 55.83333333333332900, 6.794441961970000500 ) ) ; +#59448 = ORIENTED_EDGE ( 'NONE', *, *, #26759, .F. ) ; +#59449 = ORIENTED_EDGE ( 'NONE', *, *, #36188, .F. ) ; +#59450 = AXIS2_PLACEMENT_3D ( 'NONE', #34573, #40801, #71835 ) ; +#59451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59452 = ORIENTED_EDGE ( 'NONE', *, *, #37103, .T. ) ; +#59453 = EDGE_CURVE ( 'NONE', #47321, #61108, #61506, .T. ) ; +#59454 = AXIS2_PLACEMENT_3D ( 'NONE', #53889, #16647, #60176 ) ; +#59455 = AXIS2_PLACEMENT_3D ( 'NONE', #49505, #27, #6040 ) ; +#59456 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883524900, 49.70564881207761900, -28.41114655922299500 ) ) ; +#59457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59459 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725625800, 15.93535825203885800, -28.53896444442227700 ) ) ; +#59460 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 33.00000000000001400, 9.794441961969996100 ) ) ; +#59461 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#59462 = CONICAL_SURFACE ( 'NONE', #77892, 10.50000000000009600, 0.7853981633974518300 ) ; +#59463 = ORIENTED_EDGE ( 'NONE', *, *, #75814, .F. ) ; +#59464 = ORIENTED_EDGE ( 'NONE', *, *, #25345, .F. ) ; +#59465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59466 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59467 = CARTESIAN_POINT ( 'NONE', ( -10.86785381510925900, 18.47143078992715500, -28.37063977681164700 ) ) ; +#59468 = CIRCLE ( 'NONE', #2104, 10.00000000000009200 ) ; +#59469 = ORIENTED_EDGE ( 'NONE', *, *, #8267, .T. ) ; +#59470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59471 = VERTEX_POINT ( 'NONE', #62087 ) ; +#59472 = CARTESIAN_POINT ( 'NONE', ( 11.72090442826397400, 81.50050415885208100, -28.63287458792267900 ) ) ; +#59473 = ORIENTED_EDGE ( 'NONE', *, *, #15223, .F. ) ; +#59474 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 77.94142842854304800, -28.20555803803030800 ) ) ; +#59475 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59476 = VERTEX_POINT ( 'NONE', #31075 ) ; +#59477 = ADVANCED_FACE ( 'NONE', ( #26466 ), #72199, .T. ) ; +#59478 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567147400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#59479 = AXIS2_PLACEMENT_3D ( 'NONE', #56399, #19145, #62679 ) ; +#59480 = ORIENTED_EDGE ( 'NONE', *, *, #49838, .F. ) ; +#59481 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 49.65930907398620100, -28.35186440610858900 ) ) ; +#59482 = CONICAL_SURFACE ( 'NONE', #71324, 10.00000000000009200, 0.7853981633974447300 ) ; +#59483 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057900, 61.46283204837340700, -28.48697406221668200 ) ) ; +#59484 = ORIENTED_EDGE ( 'NONE', *, *, #10093, .T. ) ; +#59485 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 67.50000000000000000, -4.865812075874393000 ) ) ; +#59486 = ORIENTED_EDGE ( 'NONE', *, *, #47334, .F. ) ; +#59487 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007100, 62.97376207875004900, -28.70555803803047500 ) ) ; +#59488 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725673700, 15.93535825203924000, -28.53896444442194600 ) ) ; +#59489 = ORIENTED_EDGE ( 'NONE', *, *, #66448, .F. ) ; +#59490 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45841, #2334, #58399, #21148 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350759894700E-007, 0.0007670609591623666800 ), + .UNSPECIFIED. ) ; +#59491 = VERTEX_POINT ( 'NONE', #49784 ) ; +#59492 = VERTEX_POINT ( 'NONE', #5779 ) ; +#59493 = ORIENTED_EDGE ( 'NONE', *, *, #66555, .F. ) ; +#59494 = EDGE_LOOP ( 'NONE', ( #2929, #45415, #49825 ) ) ; +#59495 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 20.43250300240229200, -28.20555803802995200 ) ) ; +#59496 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583910900, 30.51125751638927900, -28.53740755999535500 ) ) ; +#59497 = CONICAL_SURFACE ( 'NONE', #56599, 10.50000000000009600, 0.7853981633974518300 ) ; +#59498 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899348900, 41.97636006919910300, -28.38670679782168800 ) ) ; +#59499 = ADVANCED_FACE ( 'NONE', ( #9889 ), #56069, .T. ) ; +#59500 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465400, 39.10230989102910100, -28.61774594594332300 ) ) ; +#59501 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#59502 = AXIS2_PLACEMENT_3D ( 'NONE', #78136, #53378, #16120 ) ; +#59503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59504 = VERTEX_POINT ( 'NONE', #37548 ) ; +#59505 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004900, 41.43250300240230600, -28.20555803802997700 ) ) ; +#59506 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484928200, 79.28967419478900100, -28.59353418718932400 ) ) ; +#59507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59508 = EDGE_CURVE ( 'NONE', #24535, #19524, #37074, .T. ) ; +#59509 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013600, 51.76337688193823500, -28.37223523914899900 ) ) ; +#59510 = AXIS2_PLACEMENT_3D ( 'NONE', #48289, #29592, #35817 ) ; +#59511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59512 = CIRCLE ( 'NONE', #72252, 9.500000000000101300 ) ; +#59514 = ORIENTED_EDGE ( 'NONE', *, *, #8381, .F. ) ; +#59513 = ADVANCED_FACE ( 'NONE', ( #7917 ), #55606, .T. ) ; +#59515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59516 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59517 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 31.17701665379220800, -28.20555803802996000 ) ) ; +#59518 = CARTESIAN_POINT ( 'NONE', ( -12.29416214178217200, 35.05000000000001100, -28.37136602294609800 ) ) ; +#59519 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59520 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458390800, 30.51125751638927900, -28.53740755999535500 ) ) ; +#59521 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653787100, 51.39409401757586700, -28.39369363572396300 ) ) ; +#59522 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54977, #24007, #48964, #11759 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460908845593100E-007, 0.0008482521192571711600 ), + .UNSPECIFIED. ) ; +#59523 = ADVANCED_FACE ( 'NONE', ( #44877 ), #31612, .T. ) ; +#59524 = EDGE_CURVE ( 'NONE', #75678, #31582, #22644, .T. ) ; +#59525 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 36.94142842854297000, -28.20555803802995200 ) ) ; +#59526 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451036300, 28.65930907398620100, -28.35186440610856500 ) ) ; +#59527 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 69.63176086632792300, -28.70555803802997700 ) ) ; +#59528 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 4.666666666666678500, 4.294441961969993400 ) ) ; +#59529 = EDGE_CURVE ( 'NONE', #40799, #79395, #8137, .T. ) ; +#59530 = EDGE_LOOP ( 'NONE', ( #15058, #73037, #6764 ) ) ; +#59531 = EDGE_LOOP ( 'NONE', ( #18085, #49507, #56625, #48011 ) ) ; +#59532 = VERTEX_POINT ( 'NONE', #6836 ) ; +#59533 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 39.00000000000000000, -1.205558038030002800 ) ) ; +#59534 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734519200, 90.27440177985788200, -28.29986836858044400 ) ) ; +#59535 = EDGE_CURVE ( 'NONE', #11483, #561, #74504, .T. ) ; +#59536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23378, #60654, #29650, #73161 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838549582554084100E-007, 0.0002592578639937676900 ), + .UNSPECIFIED. ) ; +#59537 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 4.000000000000003600, -1.205558038030005300 ) ) ; +#59538 = EDGE_CURVE ( 'NONE', #15003, #65026, #24490, .T. ) ; +#59539 = CIRCLE ( 'NONE', #65876, 10.00000000000009400 ) ; +#59540 = EDGE_LOOP ( 'NONE', ( #11788, #37704, #25618, #59311, #7629, #78563, #14452, #22754, #2691, #73211, #13978, #71947, #36805, #73990, #2584, #40105, #24203, #5629, #43389, #18502, #20731, #33783, #47757, #11957, #37886, #67894, #71960, #33682, #47453, #27814, #61687, #30488, #70289, #64864, #5400, #63855, #32088, #43439, #25638, #45443, #54920, #30889, #73457, #59654, #76107, #4473, #62828, #67603, #40644, #30096, #56014, #64744, #74624, #52882, #76515, #21793, #57602, #62184, #8509, #77315, #32471, #13596, #26276, #6315, #23040, #8322, #50828, #26828, #36285, #7866, #28201, #12608, #58749, #63571, #72925, #24226, #4280, #29336, #6332, #1133, #72498, #67365, #54655, #75758, #6133, #56718, #77964, #78941, #5637, #66501, #10731, #15365, #77958, #70437, #48753, #69163, #73758, #76367, #38120, #75926, #70307, #20172, #14824, #74037, #61040, #26322, #35363, #61388, #17527, #5537, #39866, #67272, #8794, #53403, #32713, #30373, #38859, #73585, #71973, #47870, #70434, #63188, #34667, #37364 ) ) ; +#59541 = AXIS2_PLACEMENT_3D ( 'NONE', #16730, #60273, #22997 ) ; +#59542 = ORIENTED_EDGE ( 'NONE', *, *, #51790, .T. ) ; +#59543 = EDGE_CURVE ( 'NONE', #20495, #56323, #41027, .T. ) ; +#59544 = CARTESIAN_POINT ( 'NONE', ( 8.385791608194443500, 44.44999999999993200, 1.903397530102400200 ) ) ; +#59545 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#59546 = ORIENTED_EDGE ( 'NONE', *, *, #20640, .F. ) ; +#59547 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 41.33333333333335000, -6.705558038030005700 ) ) ; +#59548 = VERTEX_POINT ( 'NONE', #63158 ) ; +#59549 = ORIENTED_EDGE ( 'NONE', *, *, #16750, .F. ) ; +#59550 = VERTEX_POINT ( 'NONE', #19625 ) ; +#59551 = PLANE ( 'NONE', #73325 ) ; +#59552 = CARTESIAN_POINT ( 'NONE', ( -3.669601779484573400, 80.58127875436079500, -28.53757464917569900 ) ) ; +#59553 = ORIENTED_EDGE ( 'NONE', *, *, #10954, .T. ) ; +#59554 = VERTEX_POINT ( 'NONE', #44316 ) ; +#59555 = AXIS2_PLACEMENT_3D ( 'NONE', #37467, #18994, #62536 ) ; +#59556 = CIRCLE ( 'NONE', #20256, 9.500000000000099500 ) ; +#59557 = EDGE_CURVE ( 'NONE', #3853, #48486, #39045, .T. ) ; +#59558 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#59559 = EDGE_CURVE ( 'NONE', #58440, #15998, #60063, .T. ) ; +#59560 = PLANE ( 'NONE', #65330 ) ; +#59561 = EDGE_CURVE ( 'NONE', #53826, #34273, #45520, .T. ) ; +#59562 = CARTESIAN_POINT ( 'NONE', ( 2.373516431940519300, 92.66042437177418400, -28.66312194083703300 ) ) ; +#59563 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063461900, 20.59789380924873100, -28.25343951603343500 ) ) ; +#59564 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 73.67681279774444600, -28.70555803803047500 ) ) ; +#59565 = VECTOR ( 'NONE', #4427, 1000.000000000000000 ) ; +#59566 = AXIS2_PLACEMENT_3D ( 'NONE', #34127, #9349, #52864 ) ; +#59567 = ORIENTED_EDGE ( 'NONE', *, *, #74105, .F. ) ; +#59568 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#59569 = ORIENTED_EDGE ( 'NONE', *, *, #5237, .F. ) ; +#59570 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59571 = VERTEX_POINT ( 'NONE', #63700 ) ; +#59572 = ORIENTED_EDGE ( 'NONE', *, *, #22468, .F. ) ; +#59573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24267, #74051, #30803, #74324 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284715900, 0.0006028148015512777400 ), + .UNSPECIFIED. ) ; +#59574 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507583700, 17.57379779496243800, -28.70555803802992800 ) ) ; +#59575 = CONICAL_SURFACE ( 'NONE', #20539, 10.00000000000009600, 0.7853981633974447300 ) ; +#59576 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527470100, 45.23928571352701100, -28.36868303842828400 ) ) ; +#59577 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59578 = VERTEX_POINT ( 'NONE', #20169 ) ; +#59579 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59580 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 78.62623792124938400, -28.70555803802997700 ) ) ; +#59581 = CIRCLE ( 'NONE', #69584, 9.500000000000099500 ) ; +#59582 = AXIS2_PLACEMENT_3D ( 'NONE', #19228, #62777, #25510 ) ; +#59583 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 70.90033558196107300, -28.70555803802997700 ) ) ; +#59584 = AXIS2_PLACEMENT_3D ( 'NONE', #50612, #63179, #25916 ) ; +#59585 = ADVANCED_FACE ( 'NONE', ( #5991 ), #4032, .F. ) ; +#59586 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002100, 29.03085164125335300, -28.45573375118225800 ) ) ; +#59587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59589 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 44.83333333333332100, 6.794441961969992500 ) ) ; +#59590 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999983700, 54.37738371066698300, -28.70555803803047500 ) ) ; +#59591 = FACE_OUTER_BOUND ( 'NONE', #59331, .T. ) ; +#59592 = VERTEX_POINT ( 'NONE', #76171 ) ; +#59593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59594 = ORIENTED_EDGE ( 'NONE', *, *, #16899, .T. ) ; +#59595 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 77.22261628933232200, -28.70555803803030800 ) ) ; +#59596 = ADVANCED_FACE ( 'NONE', ( #70201 ), #51675, .T. ) ; +#59597 = AXIS2_PLACEMENT_3D ( 'NONE', #19838, #63366, #26108 ) ; +#59598 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000072800, 53.42856308690556200, -28.36981695106809600 ) ) ; +#59599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59600 = CARTESIAN_POINT ( 'NONE', ( 1.876777570536818800, 57.14999999999999900, 6.601631360360042500 ) ) ; +#59601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59602 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 36.46443389862716300, -28.54207364681941100 ) ) ; +#59603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59604 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 54.16666666666667100, -3.349151577478988200 ) ) ; +#59605 = ADVANCED_FACE ( 'NONE', ( #20590 ), #18628, .T. ) ; +#59606 = EDGE_CURVE ( 'NONE', #33855, #53190, #35207, .T. ) ; +#59607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59608 = ORIENTED_EDGE ( 'NONE', *, *, #62539, .T. ) ; +#59609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59610 = AXIS2_PLACEMENT_3D ( 'NONE', #2119, #64198, #76656 ) ; +#59611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59612 = ORIENTED_EDGE ( 'NONE', *, *, #653, .T. ) ; +#59613 = ADVANCED_FACE ( 'NONE', ( #22538 ), #49729, .F. ) ; +#59614 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 96.59999999999999400, 0.0000000000000000000 ) ) ; +#59615 = CARTESIAN_POINT ( 'NONE', ( 24.41550846826648800, 96.30774884459388800, -22.07501099903295800 ) ) ; +#59616 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819190700, 89.94924284854670300, -28.20555803802997700 ) ) ; +#59617 = ORIENTED_EDGE ( 'NONE', *, *, #58351, .F. ) ; +#59618 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965570000, 49.42298334620756600, -28.20555803802996700 ) ) ; +#59619 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64794, #27526, #2713, #46229 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569863971300E-007, 0.0004669842289003270600 ), + .UNSPECIFIED. ) ; +#59620 = ADVANCED_FACE ( 'NONE', ( #53669 ), #74140, .T. ) ; +#59621 = FACE_OUTER_BOUND ( 'NONE', #21860, .T. ) ; +#59622 = ORIENTED_EDGE ( 'NONE', *, *, #4850, .T. ) ; +#59623 = CIRCLE ( 'NONE', #40992, 9.499999999999964500 ) ; +#59624 = AXIS2_PLACEMENT_3D ( 'NONE', #61818, #24541, #68059 ) ; +#59625 = ORIENTED_EDGE ( 'NONE', *, *, #64208, .F. ) ; +#59626 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660893900, 51.46283204837311600, -28.48697406221719300 ) ) ; +#59627 = CARTESIAN_POINT ( 'NONE', ( 6.761800547196084900, 77.94142842854259400, -28.37229765499300200 ) ) ; +#59628 = CIRCLE ( 'NONE', #79394, 9.500000000000099500 ) ; +#59629 = VERTEX_POINT ( 'NONE', #70448 ) ; +#59630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59631 = VERTEX_POINT ( 'NONE', #33197 ) ; +#59633 = ORIENTED_EDGE ( 'NONE', *, *, #49222, .F. ) ; +#59632 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 13.33333333333335900, 3.124568980892187500 ) ) ; +#59634 = ORIENTED_EDGE ( 'NONE', *, *, #58102, .T. ) ; +#59635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59636 = CIRCLE ( 'NONE', #79126, 10.50000000000009600 ) ; +#59637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59638 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877852300, 50.07332680091207100, -28.37233769390156700 ) ) ; +#59639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59640 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 53.50000000000002800, 4.650848422521012700 ) ) ; +#59641 = EDGE_LOOP ( 'NONE', ( #40301, #2091, #22516 ) ) ; +#59642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59643 = CIRCLE ( 'NONE', #12373, 10.00000000000009400 ) ; +#59644 = EDGE_CURVE ( 'NONE', #50025, #12332, #31129, .T. ) ; +#59645 = EDGE_LOOP ( 'NONE', ( #76304, #3985, #78387 ) ) ; +#59647 = EDGE_CURVE ( 'NONE', #43957, #33380, #16656, .T. ) ; +#59646 = ORIENTED_EDGE ( 'NONE', *, *, #16932, .F. ) ; +#59648 = EDGE_LOOP ( 'NONE', ( #72829, #21181, #11273 ) ) ; +#59649 = ORIENTED_EDGE ( 'NONE', *, *, #45924, .F. ) ; +#59650 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252842800, 28.63131911501858400, -28.51286550264480000 ) ) ; +#59651 = CONICAL_SURFACE ( 'NONE', #29397, 10.00000000000009400, 0.7853981633974447300 ) ; +#59652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59653 = CARTESIAN_POINT ( 'NONE', ( -2.438174915909317800, 41.48385710212510700, -28.57719681746171500 ) ) ; +#59654 = ORIENTED_EDGE ( 'NONE', *, *, #47051, .T. ) ; +#59655 = FACE_OUTER_BOUND ( 'NONE', #11621, .T. ) ; +#59656 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#59657 = EDGE_CURVE ( 'NONE', #58433, #6807, #2161, .T. ) ; +#59658 = CARTESIAN_POINT ( 'NONE', ( 8.851846210996310300, 55.79999999999999000, -28.37148172714570600 ) ) ; +#59659 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#59660 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 31.11077422949656700, -28.37255355648633400 ) ) ; +#59661 = EDGE_LOOP ( 'NONE', ( #35490, #15451, #1154 ) ) ; +#59662 = CARTESIAN_POINT ( 'NONE', ( 3.014248196869008900, 81.58005252438341900, -28.24986299608894000 ) ) ; +#59663 = EDGE_CURVE ( 'NONE', #79995, #18005, #68514, .T. ) ; +#59664 = EDGE_CURVE ( 'NONE', #35438, #62615, #2054, .T. ) ; +#59665 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109264700, 41.12856921007284000, -28.37063977681168200 ) ) ; +#59666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59667 = FACE_OUTER_BOUND ( 'NONE', #71888, .T. ) ; +#59668 = EDGE_LOOP ( 'NONE', ( #42697, #27796, #75764, #18632 ) ) ; +#59669 = CONICAL_SURFACE ( 'NONE', #66042, 10.00000000000009200, 0.7853981633974447300 ) ; +#59670 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#59671 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819156900, 71.65075715145272300, -28.20555803803005900 ) ) ; +#59672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59673 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29677, #35902, #11164, #54657 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007557664487556059700, 0.001085359101287711900 ), + .UNSPECIFIED. ) ; +#59674 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 29.02242369685794200, -28.53861367218590300 ) ) ; +#59675 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456189800, 80.07527064970106800, -28.39317435246125500 ) ) ; +#59676 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59677 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#59678 = AXIS2_PLACEMENT_3D ( 'NONE', #28865, #41310, #66084 ) ; +#59679 = EDGE_CURVE ( 'NONE', #63067, #29731, #54030, .T. ) ; +#59680 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510337200, 30.94069092601379400, -28.35186440610857500 ) ) ; +#59681 = EDGE_CURVE ( 'NONE', #79993, #15610, #37097, .T. ) ; +#59682 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274707600, 35.05000000000000400, -28.20555803802995200 ) ) ; +#59683 = EDGE_CURVE ( 'NONE', #79539, #18860, #66329, .T. ) ; +#59684 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59685 = AXIS2_PLACEMENT_3D ( 'NONE', #37864, #610, #44089 ) ; +#59686 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 85.79999999999984100, -28.20555803803014400 ) ) ; +#59687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59689 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#59690 = EDGE_LOOP ( 'NONE', ( #23686, #36829, #17434, #78296, #72154 ) ) ; +#59691 = AXIS2_PLACEMENT_3D ( 'NONE', #3309, #71330, #53083 ) ; +#59692 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59693 = AXIS2_PLACEMENT_3D ( 'NONE', #38555, #69590, #75851 ) ; +#59694 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59695 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#59696 = AXIS2_PLACEMENT_3D ( 'NONE', #20724, #64267, #26991 ) ; +#59697 = CARTESIAN_POINT ( 'NONE', ( -15.46693852783917000, 65.79999999999999700, -28.37297418064014200 ) ) ; +#59698 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 26.42318720225498300, -28.70555803802994200 ) ) ; +#59699 = FACE_OUTER_BOUND ( 'NONE', #69884, .T. ) ; +#59700 = ORIENTED_EDGE ( 'NONE', *, *, #57452, .T. ) ; +#59701 = CONICAL_SURFACE ( 'NONE', #80544, 10.50000000000009600, 0.7853981633974500600 ) ; +#59702 = ORIENTED_EDGE ( 'NONE', *, *, #41789, .F. ) ; +#59703 = ORIENTED_EDGE ( 'NONE', *, *, #18425, .F. ) ; +#59704 = CIRCLE ( 'NONE', #75670, 9.500000000000101300 ) ; +#59705 = ORIENTED_EDGE ( 'NONE', *, *, #20146, .F. ) ; +#59706 = EDGE_LOOP ( 'NONE', ( #41344, #50736, #1051 ) ) ; +#59707 = ADVANCED_FACE ( 'NONE', ( #16689 ), #14724, .T. ) ; +#59708 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 59.50000000000002100, 4.650848422521016300 ) ) ; +#59709 = AXIS2_PLACEMENT_3D ( 'NONE', #140, #56158, #12688 ) ; +#59710 = EDGE_CURVE ( 'NONE', #8316, #37342, #39576, .T. ) ; +#59711 = FACE_OUTER_BOUND ( 'NONE', #74016, .T. ) ; +#59712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59713 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 42.97376207875059600, -28.70555803802997700 ) ) ; +#59714 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818954800, 89.94924284854707300, -28.20555803802997700 ) ) ; +#59715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75073, #31563, #6793, #50275 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.099081820705129600E-007, 0.0005869288236378033700 ), + .UNSPECIFIED. ) ; +#59716 = ADVANCED_FACE ( 'NONE', ( #111 ), #33225, .T. ) ; +#59717 = CONICAL_SURFACE ( 'NONE', #61846, 10.50000000000009600, 0.7853981633974518300 ) ; +#59718 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 81.35277818615432500, -28.70555803802999500 ) ) ; +#59719 = ORIENTED_EDGE ( 'NONE', *, *, #43323, .T. ) ; +#59720 = FACE_OUTER_BOUND ( 'NONE', #48603, .T. ) ; +#59721 = ORIENTED_EDGE ( 'NONE', *, *, #46884, .F. ) ; +#59722 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432841900, 39.35339758437810100, -28.20555803802995200 ) ) ; +#59724 = EDGE_CURVE ( 'NONE', #52622, #36198, #25128, .T. ) ; +#59723 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29971, #17697, #36434, #79977 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904677865800E-007, 0.0006651184466334838000 ), + .UNSPECIFIED. ) ; +#59725 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000008000, 53.66666666666669300, -8.133761268305514500 ) ) ; +#59726 = ORIENTED_EDGE ( 'NONE', *, *, #4609, .T. ) ; +#59727 = AXIS2_PLACEMENT_3D ( 'NONE', #49542, #12345, #55821 ) ; +#59728 = ORIENTED_EDGE ( 'NONE', *, *, #70705, .T. ) ; +#59729 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 44.13556610137283100, -28.54207364681943600 ) ) ; +#59730 = ORIENTED_EDGE ( 'NONE', *, *, #40024, .T. ) ; +#59731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1483, #7729, #51214, #14013 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695385950892100E-007, 0.0007987676590765252700 ), + .UNSPECIFIED. ) ; +#59732 = CONICAL_SURFACE ( 'NONE', #28912, 10.50000000000009600, 0.7853981633974482800 ) ; +#59733 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-014, 12.15857157145694100, -28.20555803802994200 ) ) ; +#59734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59735 = ADVANCED_FACE ( 'NONE', ( #47786 ), #9508, .T. ) ; +#59736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59737 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 30.83333333333334300, -12.20555803803000600 ) ) ; +#59738 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69371, #25881, #1096, #44560 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674933730100E-007, 0.0007987728781052874900 ), + .UNSPECIFIED. ) ; +#59739 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59740 = ORIENTED_EDGE ( 'NONE', *, *, #11281, .F. ) ; +#59741 = AXIS2_PLACEMENT_3D ( 'NONE', #77332, #15050, #52554 ) ; +#59742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59743 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#59744 = ORIENTED_EDGE ( 'NONE', *, *, #28737, .F. ) ; +#59745 = CONICAL_SURFACE ( 'NONE', #65439, 10.50000000000009600, 0.7853981633974500600 ) ; +#59746 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#59747 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462406000, 60.20590598242367300, -28.39369363572366500 ) ) ; +#59748 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59749 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#59750 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 71.62753447840884700, -28.38801640354855100 ) ) ; +#59751 = AXIS2_PLACEMENT_3D ( 'NONE', #45199, #32730, #69981 ) ; +#59752 = CARTESIAN_POINT ( 'NONE', ( -9.233092656309796800, 55.79999999999999000, -28.70555803802997700 ) ) ; +#59753 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849376100, 49.77966528189956800, -28.30868034705246200 ) ) ; +#59754 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 36.94142842854304100, -28.20555803802995200 ) ) ; +#59755 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 9.968680884981223400, -28.51286550264509100 ) ) ; +#59756 = EDGE_CURVE ( 'NONE', #21805, #36149, #31285, .T. ) ; +#59757 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 65.33333333333334300, 3.124568980892187500 ) ) ; +#59758 = FACE_OUTER_BOUND ( 'NONE', #8665, .T. ) ; +#59759 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 72.31032580520964400, -28.59353418718925600 ) ) ; +#59760 = CARTESIAN_POINT ( 'NONE', ( -4.561825084090852300, 9.983857102125123000, -28.57719681746174300 ) ) ; +#59761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59762 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#59763 = EDGE_LOOP ( 'NONE', ( #68083, #64729, #5545, #50150 ) ) ; +#59764 = CARTESIAN_POINT ( 'NONE', ( 11.10799745734526300, 70.27440177985781100, -28.29986836858050500 ) ) ; +#59765 = CARTESIAN_POINT ( 'NONE', ( 9.785741443455711100, 90.07527064970042800, -28.39317435246152500 ) ) ; +#59766 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59767 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#59768 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59769 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 4.999999999999997300, 13.79444196196998700 ) ) ; +#59770 = VERTEX_POINT ( 'NONE', #40781 ) ; +#59771 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40497, #65554, #46987, #9774 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001679852151197484800 ), + .UNSPECIFIED. ) ; +#59773 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999971100, 89.98922577050328200, -28.37255355648648000 ) ) ; +#59774 = ORIENTED_EDGE ( 'NONE', *, *, #32352, .T. ) ; +#59775 = FACE_OUTER_BOUND ( 'NONE', #45526, .T. ) ; +#59776 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59777 = ORIENTED_EDGE ( 'NONE', *, *, #20479, .T. ) ; +#59778 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274722500, 45.86787096422376900, -28.37244029424745100 ) ) ; +#59779 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715066300, 18.27966528189952600, -28.30868034705247300 ) ) ; +#59780 = FACE_OUTER_BOUND ( 'NONE', #20247, .T. ) ; +#59781 = EDGE_CURVE ( 'NONE', #5802, #52661, #78990, .T. ) ; +#59782 = VERTEX_POINT ( 'NONE', #59583 ) ; +#59783 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 33.17681279774500100, -28.70555803802996700 ) ) ; +#59784 = FACE_OUTER_BOUND ( 'NONE', #15184, .T. ) ; +#59785 = CIRCLE ( 'NONE', #75273, 10.00000000000009200 ) ; +#59786 = ORIENTED_EDGE ( 'NONE', *, *, #29802, .T. ) ; +#59787 = EDGE_LOOP ( 'NONE', ( #4158, #80770, #55064, #59896 ) ) ; +#59788 = EDGE_LOOP ( 'NONE', ( #26249, #51039, #55487, #23030 ) ) ; +#59789 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#59790 = AXIS2_PLACEMENT_3D ( 'NONE', #57853, #39337, #33102 ) ; +#59791 = EDGE_CURVE ( 'NONE', #71659, #38345, #10668, .T. ) ; +#59792 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#59793 = EDGE_CURVE ( 'NONE', #25889, #70151, #76976, .T. ) ; +#59794 = CARTESIAN_POINT ( 'NONE', ( 9.438065798940478100, 28.61613388835919700, -28.57723500840077700 ) ) ; +#59795 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 70.34267608797617300, -28.20555803803014400 ) ) ; +#59796 = ADVANCED_FACE ( 'NONE', ( #45827 ), #60486, .T. ) ; +#59797 = CIRCLE ( 'NONE', #23225, 10.00000000000009200 ) ; +#59798 = EDGE_CURVE ( 'NONE', #39632, #53013, #77006, .T. ) ; +#59799 = VERTEX_POINT ( 'NONE', #4072 ) ; +#59800 = AXIS2_PLACEMENT_3D ( 'NONE', #38869, #1629, #45107 ) ; +#59801 = CONICAL_SURFACE ( 'NONE', #69078, 10.00000000000009200, 0.7853981633974447300 ) ; +#59802 = CARTESIAN_POINT ( 'NONE', ( 3.469479452198304800, 91.59999999999999400, -28.70555803802999500 ) ) ; +#59803 = VERTEX_POINT ( 'NONE', #47548 ) ; +#59804 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473037100, 71.58737389638859800, -28.29936525552441000 ) ) ; +#59805 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 2.500000000000011100, -9.258116921287651700 ) ) ; +#59806 = ORIENTED_EDGE ( 'NONE', *, *, #46884, .T. ) ; +#59807 = VERTEX_POINT ( 'NONE', #35110 ) ; +#59808 = ORIENTED_EDGE ( 'NONE', *, *, #56330, .T. ) ; +#59809 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59810 = VERTEX_POINT ( 'NONE', #78622 ) ; +#59811 = ADVANCED_FACE ( 'NONE', ( #29374 ), #43871, .T. ) ; +#59812 = CONICAL_SURFACE ( 'NONE', #37637, 10.50000000000009600, 0.7853981633974500600 ) ; +#59813 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 36.83333333333335000, 0.1341879241256075400 ) ) ; +#59814 = AXIS2_PLACEMENT_3D ( 'NONE', #27490, #70980, #33725 ) ; +#59815 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #43560, #6330 ) ; +#59816 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385200, 41.43650294695131500, -28.30782889147482400 ) ) ; +#59817 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66206, #59953, #16425, #72468 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867009169300E-007, 0.001076778502991087600 ), + .UNSPECIFIED. ) ; +#59818 = EDGE_CURVE ( 'NONE', #9060, #16188, #62416, .T. ) ; +#59819 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 1.833333333333343900, 0.9380355014189731800 ) ) ; +#59820 = VERTEX_POINT ( 'NONE', #47824 ) ; +#59821 = AXIS2_PLACEMENT_3D ( 'NONE', #39389, #2117, #45615 ) ; +#59822 = ORIENTED_EDGE ( 'NONE', *, *, #58249, .F. ) ; +#59823 = ORIENTED_EDGE ( 'NONE', *, *, #54119, .F. ) ; +#59824 = CARTESIAN_POINT ( 'NONE', ( 8.374770354172486700, 44.44999999999999600, -5.367579707288671300 ) ) ; +#59825 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#59826 = CIRCLE ( 'NONE', #78404, 9.500000000000099500 ) ; +#59827 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 39.16666666666669300, 1.741883078712356500 ) ) ; +#59828 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999932500, 15.22261628933229200, -28.70555803803025800 ) ) ; +#59829 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59830 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#59831 = EDGE_CURVE ( 'NONE', #31952, #35884, #12798, .T. ) ; +#59832 = AXIS2_PLACEMENT_3D ( 'NONE', #23048, #54026, #28806 ) ; +#59833 = AXIS2_PLACEMENT_3D ( 'NONE', #74341, #37032, #80572 ) ; +#59834 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#59835 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 90.16749699759768100, -28.20555803802997700 ) ) ; +#59836 = CARTESIAN_POINT ( 'NONE', ( 9.733473218116454700, 41.39435118792235400, -28.41114655922301000 ) ) ; +#59837 = ADVANCED_FACE ( 'NONE', ( #64400 ), #25436, .F. ) ; +#59838 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180778700, 51.65075715145311400, -28.20555803802997700 ) ) ; +#59839 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428640500, 10.02858243452102000, -28.70555803802994200 ) ) ; +#59840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12666, #49868, #31426, #74938 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047511842900E-007, 0.0003301033223275632300 ), + .UNSPECIFIED. ) ; +#59841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59842 = CIRCLE ( 'NONE', #44394, 10.00000000000009200 ) ; +#59843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59844 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454033500, 82.51973550835639100, -28.70555803803023000 ) ) ; +#59845 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#59846 = AXIS2_PLACEMENT_3D ( 'NONE', #58608, #21365, #64900 ) ; +#59847 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153560700, 70.79999999999985500, -28.55171188418395900 ) ) ; +#59848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59850 = ORIENTED_EDGE ( 'NONE', *, *, #39107, .F. ) ; +#59849 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#59851 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#59852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59853 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48564, #30140, #64733, #27459 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.844546244749648100E-017, 0.001179148174662888400 ), + .UNSPECIFIED. ) ; +#59854 = EDGE_LOOP ( 'NONE', ( #60260, #36013, #63774, #20080 ) ) ; +#59855 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535000, 55.79999999999999000, -28.63843632546336000 ) ) ; +#59856 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.23796787468681700, -28.38801640354855500 ) ) ; +#59857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59858 = CONICAL_SURFACE ( 'NONE', #38531, 10.00000000000009400, 0.7853981633974447300 ) ; +#59859 = AXIS2_PLACEMENT_3D ( 'NONE', #5382, #73660, #48862 ) ; +#59860 = CIRCLE ( 'NONE', #34075, 9.500000000000101300 ) ; +#59861 = ORIENTED_EDGE ( 'NONE', *, *, #43107, .F. ) ; +#59862 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 42.66666666666667100, -8.133761268305512700 ) ) ; +#59863 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59865 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39266, #76532, #8246, #51749 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278442600, 0.0005468822770170173400 ), + .UNSPECIFIED. ) ; +#59866 = EDGE_LOOP ( 'NONE', ( #33329, #33262, #57097, #53032 ) ) ; +#59867 = VECTOR ( 'NONE', #38512, 1000.000000000000000 ) ; +#59868 = CIRCLE ( 'NONE', #59065, 10.00000000000009200 ) ; +#59869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59870 = ORIENTED_EDGE ( 'NONE', *, *, #57043, .T. ) ; +#59871 = ORIENTED_EDGE ( 'NONE', *, *, #29192, .F. ) ; +#59872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59873 = AXIS2_PLACEMENT_3D ( 'NONE', #21767, #46199, #65318 ) ; +#59874 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.20037755566797000, -28.53664883431634900 ) ) ; +#59875 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 80.16749699759769500, -28.20555803802997700 ) ) ; +#59876 = CARTESIAN_POINT ( 'NONE', ( 1.194207761677168500, 57.14999999999999100, 7.139334059044307100 ) ) ; +#59877 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76163, #20164, #45118, #7888 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354296478000E-007, 0.0004318366892330758900 ), + .UNSPECIFIED. ) ; +#59878 = CIRCLE ( 'NONE', #1275, 10.50000000000009600 ) ; +#59879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59880 = VERTEX_POINT ( 'NONE', #41855 ) ; +#59881 = CONICAL_SURFACE ( 'NONE', #77902, 10.00000000000009200, 0.7853981633974447300 ) ; +#59882 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 56.33333333333334300, 2.794441961969998300 ) ) ; +#59883 = EDGE_LOOP ( 'NONE', ( #54418, #73597, #48125 ) ) ; +#59884 = ORIENTED_EDGE ( 'NONE', *, *, #47825, .F. ) ; +#59885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59886 = VERTEX_POINT ( 'NONE', #4602 ) ; +#59887 = CARTESIAN_POINT ( 'NONE', ( -17.07349184251535900, 90.22161678501181800, -28.29547179040443400 ) ) ; +#59888 = VERTEX_POINT ( 'NONE', #17125 ) ; +#59889 = PLANE ( 'NONE', #52775 ) ; +#59890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59891 = FACE_OUTER_BOUND ( 'NONE', #11931, .T. ) ; +#59892 = VERTEX_POINT ( 'NONE', #60657 ) ; +#59893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59894 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#59895 = ADVANCED_FACE ( 'NONE', ( #41955 ), #48085, .T. ) ; +#59896 = ORIENTED_EDGE ( 'NONE', *, *, #34923, .F. ) ; +#59897 = EDGE_CURVE ( 'NONE', #62491, #46517, #62528, .T. ) ; +#59898 = ORIENTED_EDGE ( 'NONE', *, *, #13095, .T. ) ; +#59899 = FACE_OUTER_BOUND ( 'NONE', #53300, .T. ) ; +#59900 = EDGE_CURVE ( 'NONE', #30703, #40425, #48021, .T. ) ; +#59901 = ADVANCED_FACE ( 'NONE', ( #10834 ), #56549, .F. ) ; +#59902 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 11.16666666666666600, -6.205558038030004800 ) ) ; +#59903 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825121300, 51.43945992495515900, -28.34042301926892500 ) ) ; +#59904 = EDGE_CURVE ( 'NONE', #61277, #10390, #73122, .T. ) ; +#59905 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71718, #59472, #78233, #40965 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098466999410227600E-007, 0.0006654947828621747000 ), + .UNSPECIFIED. ) ; +#59906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59907 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 51.33333333333334300, -8.133761268305512700 ) ) ; +#59908 = EDGE_CURVE ( 'NONE', #53544, #4729, #27393, .T. ) ; +#59909 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #31190, #74431 ) ; +#59910 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59911 = FACE_OUTER_BOUND ( 'NONE', #58347, .T. ) ; +#59912 = ADVANCED_FACE ( 'NONE', ( #58513 ), #71149, .T. ) ; +#59913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59914 = PLANE ( 'NONE', #66469 ) ; +#59915 = ORIENTED_EDGE ( 'NONE', *, *, #49142, .T. ) ; +#59916 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541600, 71.01872124563918500, -28.53757464917569900 ) ) ; +#59917 = ORIENTED_EDGE ( 'NONE', *, *, #6404, .T. ) ; +#59918 = CIRCLE ( 'NONE', #20772, 10.50000000000009800 ) ; +#59919 = AXIS2_PLACEMENT_3D ( 'NONE', #22115, #53381, #34633 ) ; +#59921 = ORIENTED_EDGE ( 'NONE', *, *, #17836, .T. ) ; +#59920 = EDGE_CURVE ( 'NONE', #59347, #36616, #33591, .T. ) ; +#59922 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59923 = EDGE_CURVE ( 'NONE', #53768, #59491, #68266, .T. ) ; +#59924 = EDGE_CURVE ( 'NONE', #5070, #15678, #19124, .T. ) ; +#59925 = ADVANCED_FACE ( 'NONE', ( #23482 ), #4966, .F. ) ; +#59926 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59928 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59927 = AXIS2_PLACEMENT_3D ( 'NONE', #53979, #16732, #60275 ) ; +#59929 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 65.79999999999982700, -28.20555803803014400 ) ) ; +#59930 = LINE ( 'NONE', #10141, #76444 ) ; +#59931 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59932 = FACE_OUTER_BOUND ( 'NONE', #3803, .T. ) ; +#59933 = ORIENTED_EDGE ( 'NONE', *, *, #23193, .F. ) ; +#59934 = AXIS2_PLACEMENT_3D ( 'NONE', #74424, #37125, #80666 ) ; +#59935 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 57.46443389862719200, -28.54207364681942500 ) ) ; +#59936 = CIRCLE ( 'NONE', #72958, 10.00000000000009200 ) ; +#59937 = CARTESIAN_POINT ( 'NONE', ( -10.07349692871593500, 71.37839075872575700, -28.29547734244344800 ) ) ; +#59938 = AXIS2_PLACEMENT_3D ( 'NONE', #50709, #32766, #76276 ) ; +#59939 = ORIENTED_EDGE ( 'NONE', *, *, #40058, .T. ) ; +#59940 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725302100, 24.54999999999999700, -28.20555803802994200 ) ) ; +#59941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59942 = EDGE_CURVE ( 'NONE', #40962, #79471, #38034, .T. ) ; +#59944 = VERTEX_POINT ( 'NONE', #61727 ) ; +#59943 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#59945 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#59946 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 75.79999999999999700, -28.70525300642875200 ) ) ; +#59947 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#59948 = AXIS2_PLACEMENT_3D ( 'NONE', #46815, #53081, #28114 ) ; +#59949 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59950 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75373, #63145, #32120, #75627 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634738785000E-007, 0.0008082706238602540800 ), + .UNSPECIFIED. ) ; +#59951 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#59952 = CIRCLE ( 'NONE', #15479, 9.500000000000095900 ) ; +#59953 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725274600, 24.86787096422365900, -28.37244029424737200 ) ) ; +#59954 = FACE_OUTER_BOUND ( 'NONE', #9355, .T. ) ; +#59955 = EDGE_LOOP ( 'NONE', ( #23895, #4445, #37442, #8837, #31364 ) ) ; +#59956 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#59957 = CARTESIAN_POINT ( 'NONE', ( -8.851846210996294300, 85.79999999999998300, -28.37148172714570600 ) ) ; +#59958 = ORIENTED_EDGE ( 'NONE', *, *, #15101, .T. ) ; +#59959 = ORIENTED_EDGE ( 'NONE', *, *, #15710, .F. ) ; +#59960 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54210, #79001, #23221, #66747 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951433624200E-007, 0.0007331043932795554500 ), + .UNSPECIFIED. ) ; +#59961 = AXIS2_PLACEMENT_3D ( 'NONE', #40217, #33983, #65016 ) ; +#59962 = VERTEX_POINT ( 'NONE', #55433 ) ; +#59963 = ORIENTED_EDGE ( 'NONE', *, *, #70117, .F. ) ; +#59964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59965 = ORIENTED_EDGE ( 'NONE', *, *, #32590, .F. ) ; +#59966 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#59967 = CONICAL_SURFACE ( 'NONE', #77095, 10.00000000000009400, 0.7853981633974447300 ) ; +#59968 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 80.34267608797570400, -28.20555803802997700 ) ) ; +#59969 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 33.49926474563211100, -28.70555803802996700 ) ) ; +#59970 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59971 = EDGE_LOOP ( 'NONE', ( #65846, #51855, #69062, #50453 ) ) ; +#59972 = ORIENTED_EDGE ( 'NONE', *, *, #58911, .T. ) ; +#59973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#59974 = VERTEX_POINT ( 'NONE', #36935 ) ; +#59975 = FACE_OUTER_BOUND ( 'NONE', #69056, .T. ) ; +#59976 = AXIS2_PLACEMENT_3D ( 'NONE', #78064, #72101, #59577 ) ; +#59977 = EDGE_LOOP ( 'NONE', ( #18738, #72243, #60257 ) ) ; +#59978 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ; +#59979 = CONICAL_SURFACE ( 'NONE', #62664, 10.00000000000009200, 0.7853981633974447300 ) ; +#59980 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 57.33333333333335700, -5.205558038030008400 ) ) ; +#59981 = AXIS2_PLACEMENT_3D ( 'NONE', #51565, #57855, #8058 ) ; +#59982 = CARTESIAN_POINT ( 'NONE', ( -3.243064933257830500, 51.43482203710631500, -28.29548531138973600 ) ) ; +#59983 = VERTEX_POINT ( 'NONE', #49159 ) ; +#59984 = CARTESIAN_POINT ( 'NONE', ( 4.002028721724539800, 9.810914768184741100, -28.25432823872353400 ) ) ; +#59985 = ADVANCED_FACE ( 'NONE', ( #54605 ), #36120, .F. ) ; +#59986 = EDGE_CURVE ( 'NONE', #65, #31405, #4665, .T. ) ; +#59987 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#59988 = AXIS2_PLACEMENT_3D ( 'NONE', #20692, #64234, #26960 ) ; +#59989 = CONICAL_SURFACE ( 'NONE', #12067, 10.00000000000009400, 0.7853981633974447300 ) ; +#59990 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#59991 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 51.50000000000001400, 4.650848422521016300 ) ) ; +#59992 = FACE_OUTER_BOUND ( 'NONE', #77477, .T. ) ; +#59993 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 43.65857157145701700, -28.20555803802997700 ) ) ; +#59994 = EDGE_LOOP ( 'NONE', ( #131, #75319, #19394, #33932 ) ) ; +#59995 = ORIENTED_EDGE ( 'NONE', *, *, #71462, .T. ) ; +#59996 = CONICAL_SURFACE ( 'NONE', #31155, 10.00000000000009200, 0.7853981633974447300 ) ; +#59997 = ADVANCED_FACE ( 'NONE', ( #21536 ), #3003, .T. ) ; +#59998 = ORIENTED_EDGE ( 'NONE', *, *, #21443, .T. ) ; +#59999 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807146000, 86.79999999999996900, -28.70555803802997700 ) ) ; +#60000 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567700, 36.93535825203925100, -28.53896444442196800 ) ) ; +#60001 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16941, #22920, #60202, #60472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122928014600, 0.0007303749718165144100 ), + .UNSPECIFIED. ) ; +#60002 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.65857157145661900, -28.20555803803030800 ) ) ; +#60003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60004 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488088700, 71.99560977511647800, -28.70555803803014400 ) ) ; +#60005 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 28.66666666666668600, 8.320721403598824400 ) ) ; +#60006 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153560700, 70.79999999999985500, -28.55171188418395900 ) ) ; +#60007 = CONICAL_SURFACE ( 'NONE', #18686, 10.00000000000009200, 0.7853981633974447300 ) ; +#60008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60009 = FACE_OUTER_BOUND ( 'NONE', #79640, .T. ) ; +#60010 = CARTESIAN_POINT ( 'NONE', ( -3.535187653982936800, 9.406791769321969800, -28.68794773163825000 ) ) ; +#60012 = EDGE_CURVE ( 'NONE', #24389, #5959, #69199, .T. ) ; +#60011 = VERTEX_POINT ( 'NONE', #43451 ) ; +#60013 = ADVANCED_FACE ( 'NONE', ( #19570 ), #80733, .T. ) ; +#60014 = EDGE_CURVE ( 'NONE', #62098, #79839, #70986, .T. ) ; +#60015 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60016 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60017 = EDGE_LOOP ( 'NONE', ( #51278, #49660, #58740 ) ) ; +#60018 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.30277574221158000, -28.32715733700494100 ) ) ; +#60019 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60020 = ADVANCED_FACE ( 'NONE', ( #52632 ), #17633, .F. ) ; +#60021 = ORIENTED_EDGE ( 'NONE', *, *, #13707, .T. ) ; +#60022 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 40.90050506338822300, -28.70555803802997700 ) ) ; +#60023 = EDGE_CURVE ( 'NONE', #80788, #15753, #34160, .T. ) ; +#60024 = ADVANCED_FACE ( 'NONE', ( #50667 ), #48728, .T. ) ; +#60025 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#60026 = CARTESIAN_POINT ( 'NONE', ( -16.57123091997325300, 51.47225659168404400, -28.53062721603933800 ) ) ; +#60027 = EDGE_CURVE ( 'NONE', #72751, #6772, #56525, .T. ) ; +#60028 = CIRCLE ( 'NONE', #67907, 9.500000000000097700 ) ; +#60029 = AXIS2_PLACEMENT_3D ( 'NONE', #20125, #63651, #26390 ) ; +#60030 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#60031 = VERTEX_POINT ( 'NONE', #25254 ) ; +#60032 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 63.16666666666667900, -6.205558038030004800 ) ) ; +#60033 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60034 = ORIENTED_EDGE ( 'NONE', *, *, #50328, .F. ) ; +#60035 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 5.000000000000000900, -18.70555803803001300 ) ) ; +#60036 = EDGE_LOOP ( 'NONE', ( #53548, #51819, #31849, #66299 ) ) ; +#60037 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#60038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56610, #6844, #44069, #62897 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025185800, 0.0006251342085520286800 ), + .UNSPECIFIED. ) ; +#60039 = ORIENTED_EDGE ( 'NONE', *, *, #67657, .F. ) ; +#60040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60041 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 60.69949493661175700, -28.70555803802997700 ) ) ; +#60042 = CIRCLE ( 'NONE', #15117, 10.50000000000009600 ) ; +#60043 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60044 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807245900, 86.80000000000004000, -28.70555803803014400 ) ) ; +#60045 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48407, #4926, #67222, #29988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002843208521659398300, 0.0009492057883278530300 ), + .UNSPECIFIED. ) ; +#60047 = ORIENTED_EDGE ( 'NONE', *, *, #61641, .F. ) ; +#60046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60049 = ORIENTED_EDGE ( 'NONE', *, *, #12602, .F. ) ; +#60050 = EDGE_CURVE ( 'NONE', #70227, #31241, #67258, .T. ) ; +#60051 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60052 = EDGE_CURVE ( 'NONE', #76933, #53406, #42051, .T. ) ; +#60053 = EDGE_CURVE ( 'NONE', #36817, #5879, #27630, .T. ) ; +#60054 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60055 = CONICAL_SURFACE ( 'NONE', #50231, 10.50000000000009600, 0.7853981633974500600 ) ; +#60056 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615328200, 60.80000000000004000, -28.55171188418384500 ) ) ; +#60057 = ORIENTED_EDGE ( 'NONE', *, *, #52678, .F. ) ; +#60058 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484970800, 62.31032580520965100, -28.59353418718926000 ) ) ; +#60059 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566869200, 45.54999999999998300, -28.70555803802996700 ) ) ; +#60060 = AXIS2_PLACEMENT_3D ( 'NONE', #74527, #24746, #80515 ) ; +#60061 = VERTEX_POINT ( 'NONE', #1009 ) ; +#60062 = CONICAL_SURFACE ( 'NONE', #3192, 10.00000000000009200, 0.7853981633974447300 ) ; +#60063 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75638, #19902, #38617, #1367 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392203916400E-007, 0.0003301092607755755400 ), + .UNSPECIFIED. ) ; +#60064 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.70555803803042500 ) ) ; +#60065 = CIRCLE ( 'NONE', #50639, 10.00000000000009400 ) ; +#60066 = EDGE_CURVE ( 'NONE', #77938, #16201, #75069, .T. ) ; +#60067 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 79.63176086632792300, -28.70555803802997700 ) ) ; +#60068 = AXIS2_PLACEMENT_3D ( 'NONE', #55576, #74109, #68093 ) ; +#60069 = AXIS2_PLACEMENT_3D ( 'NONE', #11892, #55372, #18132 ) ; +#60070 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300866700, 68.40378923506912700, -28.61864990621755200 ) ) ; +#60071 = CARTESIAN_POINT ( 'NONE', ( -8.116254736416749400, 45.54999999999998300, -28.53994725305377100 ) ) ; +#60072 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105664400, 14.05000000000002000, -28.70555803802992800 ) ) ; +#60073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60074 = ORIENTED_EDGE ( 'NONE', *, *, #42853, .T. ) ; +#60075 = CONICAL_SURFACE ( 'NONE', #1, 10.50000000000009800, 0.7853981633974518300 ) ; +#60076 = VERTEX_POINT ( 'NONE', #25801 ) ; +#60077 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 47.44142842854306300, -28.20555803802996700 ) ) ; +#60078 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 0.3333333333333417500, 8.320721403598817300 ) ) ; +#60079 = CONICAL_SURFACE ( 'NONE', #6068, 10.50000000000009600, 0.7853981633974500600 ) ; +#60080 = ORIENTED_EDGE ( 'NONE', *, *, #65171, .F. ) ; +#60081 = VERTEX_POINT ( 'NONE', #13290 ) ; +#60082 = CIRCLE ( 'NONE', #60828, 10.50000000000009200 ) ; +#60083 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 34.66666666666667100, -3.705558038030004400 ) ) ; +#60084 = AXIS2_PLACEMENT_3D ( 'NONE', #79510, #42202, #4964 ) ; +#60085 = EDGE_LOOP ( 'NONE', ( #64175, #17525, #61835, #23984 ) ) ; +#60086 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47354, #47626, #53906, #16661 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.003012607932589621900 ), + .UNSPECIFIED. ) ; +#60087 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, -0.3333333333333243800, -5.205558038030003100 ) ) ; +#60088 = AXIS2_PLACEMENT_3D ( 'NONE', #71448, #3156, #46663 ) ; +#60089 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310634900, 51.49769010897038900, -28.61774594594309900 ) ) ; +#60090 = CIRCLE ( 'NONE', #14993, 10.00000000000009400 ) ; +#60091 = FACE_OUTER_BOUND ( 'NONE', #75924, .T. ) ; +#60092 = EDGE_LOOP ( 'NONE', ( #38114, #56538, #36506, #13154 ) ) ; +#60093 = CARTESIAN_POINT ( 'NONE', ( 1.637015245184818100, 44.45000000000001700, -10.57360042643955300 ) ) ; +#60094 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60095 = EDGE_CURVE ( 'NONE', #907, #22091, #13173, .T. ) ; +#60096 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 37.00000000000001400, -1.205558038030002800 ) ) ; +#60097 = AXIS2_PLACEMENT_3D ( 'NONE', #30595, #74116, #36816 ) ; +#60098 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658261800, 30.94848545219034700, -28.67627428870437000 ) ) ; +#60099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60100 = ORIENTED_EDGE ( 'NONE', *, *, #40572, .T. ) ; +#60101 = AXIS2_PLACEMENT_3D ( 'NONE', #7885, #51369, #14170 ) ; +#60102 = CARTESIAN_POINT ( 'NONE', ( 17.21337454949771800, 91.94610680728214900, -28.45813828539370100 ) ) ; +#60103 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187875900, 28.49813478817166900, -28.24089224568487900 ) ) ; +#60104 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528153100, 9.968680884981223400, -28.51286550264508800 ) ) ; +#60105 = CIRCLE ( 'NONE', #1522, 10.00000000000009400 ) ; +#60106 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60107 = FACE_OUTER_BOUND ( 'NONE', #73301, .T. ) ; +#60108 = EDGE_LOOP ( 'NONE', ( #28700, #64513, #35948, #75571 ) ) ; +#60109 = AXIS2_PLACEMENT_3D ( 'NONE', #44471, #7238, #50741 ) ; +#60110 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 80.16749699759753900, -28.20555803803030800 ) ) ; +#60111 = ORIENTED_EDGE ( 'NONE', *, *, #76064, .T. ) ; +#60112 = ORIENTED_EDGE ( 'NONE', *, *, #67775, .T. ) ; +#60113 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60114 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537342000, 81.25732391202386400, -28.20555803803014400 ) ) ; +#60115 = ORIENTED_EDGE ( 'NONE', *, *, #32021, .F. ) ; +#60116 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60117 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528200, 24.23212903577626100, -28.37244029424740800 ) ) ; +#60118 = ADVANCED_FACE ( 'NONE', ( #8830 ), #63373, .F. ) ; +#60119 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60120 = ORIENTED_EDGE ( 'NONE', *, *, #23207, .T. ) ; +#60121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60122 = ORIENTED_EDGE ( 'NONE', *, *, #8222, .T. ) ; +#60123 = ADVANCED_FACE ( 'NONE', ( #15665 ), #30297, .T. ) ; +#60124 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655685600, 38.92298334620756600, -28.20555803802995200 ) ) ; +#60125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60126 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.79722425778842200, -28.32715733700494100 ) ) ; +#60127 = CIRCLE ( 'NONE', #3296, 10.50000000000009600 ) ; +#60128 = ORIENTED_EDGE ( 'NONE', *, *, #29125, .T. ) ; +#60129 = EDGE_CURVE ( 'NONE', #46553, #15606, #46775, .T. ) ; +#60130 = VERTEX_POINT ( 'NONE', #69823 ) ; +#60131 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 40.50000000000002100, 4.650848422521016300 ) ) ; +#60132 = EDGE_LOOP ( 'NONE', ( #35763, #31863, #13091, #73834 ) ) ; +#60133 = EDGE_CURVE ( 'NONE', #50101, #46843, #65348, .T. ) ; +#60134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16160, #53412, #28441, #59686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957553608500E-005, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#60136 = CONICAL_SURFACE ( 'NONE', #26150, 10.50000000000009600, 0.7853981633974500600 ) ; +#60137 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 24.55000000000000100, -28.20555803802994200 ) ) ; +#60138 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#60139 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260101000, 80.20034312068827400, -28.70555803803001300 ) ) ; +#60140 = CARTESIAN_POINT ( 'NONE', ( -4.352634706788554900, 57.14999999999998400, 6.776594624708351100 ) ) ; +#60141 = EDGE_CURVE ( 'NONE', #36192, #61292, #79483, .T. ) ; +#60142 = ORIENTED_EDGE ( 'NONE', *, *, #72879, .F. ) ; +#60143 = ADVANCED_FACE ( 'NONE', ( #79906 ), #76345, .T. ) ; +#60144 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#60145 = EDGE_CURVE ( 'NONE', #37874, #31444, #32208, .T. ) ; +#60146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60147 = EDGE_CURVE ( 'NONE', #50469, #30072, #65033, .T. ) ; +#60148 = CIRCLE ( 'NONE', #25543, 10.00000000000009200 ) ; +#60149 = ORIENTED_EDGE ( 'NONE', *, *, #40223, .F. ) ; +#60150 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60151 = CARTESIAN_POINT ( 'NONE', ( -19.99306593700901000, 7.503544703530956800, -27.37002804544695400 ) ) ; +#60152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60153 = ORIENTED_EDGE ( 'NONE', *, *, #33784, .F. ) ; +#60154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60155 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60156 = FACE_OUTER_BOUND ( 'NONE', #43676, .T. ) ; +#60157 = AXIS2_PLACEMENT_3D ( 'NONE', #65042, #27778, #71273 ) ; +#60158 = EDGE_CURVE ( 'NONE', #15440, #52291, #50495, .T. ) ; +#60159 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116588400, 9.894351187922383800, -28.41114655922296400 ) ) ; +#60160 = EDGE_CURVE ( 'NONE', #41786, #43125, #36097, .T. ) ; +#60161 = ORIENTED_EDGE ( 'NONE', *, *, #26109, .T. ) ; +#60162 = EDGE_CURVE ( 'NONE', #49574, #12876, #13739, .T. ) ; +#60163 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252817900, 49.63131911501876200, -28.51286550264511300 ) ) ; +#60164 = AXIS2_PLACEMENT_3D ( 'NONE', #61837, #24555, #68071 ) ; +#60165 = FACE_OUTER_BOUND ( 'NONE', #80430, .T. ) ; +#60166 = ORIENTED_EDGE ( 'NONE', *, *, #28096, .F. ) ; +#60167 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#60168 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000034200, 60.69949493661177100, -28.70555803802997700 ) ) ; +#60169 = ORIENTED_EDGE ( 'NONE', *, *, #47415, .T. ) ; +#60170 = AXIS2_PLACEMENT_3D ( 'NONE', #21482, #65004, #27737 ) ; +#60171 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 9.000000000000003600, 3.794441961969998300 ) ) ; +#60172 = AXIS2_PLACEMENT_3D ( 'NONE', #73028, #35754, #79271 ) ; +#60173 = AXIS2_PLACEMENT_3D ( 'NONE', #24400, #55374, #74188 ) ; +#60174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60175 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45248, #1751, #57803, #20556 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399031994326400E-007, 0.0009968645831862255200 ), + .UNSPECIFIED. ) ; +#60176 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60177 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 49.16666666666667900, 6.794441961969992500 ) ) ; +#60178 = CONICAL_SURFACE ( 'NONE', #44103, 10.00000000000009400, 0.7853981633974447300 ) ; +#60179 = CIRCLE ( 'NONE', #14652, 10.00000000000009200 ) ; +#60180 = VERTEX_POINT ( 'NONE', #14160 ) ; +#60181 = ORIENTED_EDGE ( 'NONE', *, *, #46390, .T. ) ; +#60182 = ORIENTED_EDGE ( 'NONE', *, *, #80493, .F. ) ; +#60183 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13259, #56749, #63026, #25772 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534732500 ), + .UNSPECIFIED. ) ; +#60184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60185 = ORIENTED_EDGE ( 'NONE', *, *, #27270, .F. ) ; +#60186 = ORIENTED_EDGE ( 'NONE', *, *, #8738, .F. ) ; +#60187 = ORIENTED_EDGE ( 'NONE', *, *, #38767, .F. ) ; +#60188 = ORIENTED_EDGE ( 'NONE', *, *, #80296, .T. ) ; +#60189 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873270700, 59.89196326503810800, -28.29033182162388400 ) ) ; +#60190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61839, #18300, #74349, #37040 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736099276700E-007, 0.0006649316450232187600 ), + .UNSPECIFIED. ) ; +#60191 = AXIS2_PLACEMENT_3D ( 'NONE', #59015, #65321, #15506 ) ; +#60192 = ORIENTED_EDGE ( 'NONE', *, *, #34780, .T. ) ; +#60193 = EDGE_CURVE ( 'NONE', #4381, #33691, #1049, .T. ) ; +#60194 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 12.63556610137281700, -28.54207364681940000 ) ) ; +#60195 = ADVANCED_FACE ( 'NONE', ( #77948 ), #59462, .F. ) ; +#60196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60197 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78266, #9985, #28801, #72295 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248246900, 0.0008027336008623635800 ), + .UNSPECIFIED. ) ; +#60198 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310634900, 51.49769010897038900, -28.61774594594309900 ) ) ; +#60199 = ORIENTED_EDGE ( 'NONE', *, *, #39869, .F. ) ; +#60200 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60201 = CIRCLE ( 'NONE', #75138, 10.00000000000009400 ) ; +#60202 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.23237991241896300, -28.26633708900912700 ) ) ; +#60203 = ORIENTED_EDGE ( 'NONE', *, *, #34869, .F. ) ; +#60204 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60205 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819156900, 71.65075715145272300, -28.20555803803005900 ) ) ; +#60206 = EDGE_CURVE ( 'NONE', #78600, #34438, #21645, .T. ) ; +#60207 = ORIENTED_EDGE ( 'NONE', *, *, #44937, .T. ) ; +#60208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60210 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708540700, 85.80000000000167400, -28.63843632546335300 ) ) ; +#60211 = AXIS2_PLACEMENT_3D ( 'NONE', #32577, #51300, #14092 ) ; +#60212 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511904600, 71.99560977511662000, -28.70555803802997700 ) ) ; +#60213 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269683400, 90.01262610361172300, -28.29936525552480100 ) ) ; +#60214 = CIRCLE ( 'NONE', #74046, 10.50000000000009600 ) ; +#60215 = ADVANCED_FACE ( 'NONE', ( #61431 ), #26385, .F. ) ; +#60216 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#60217 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60218 = CARTESIAN_POINT ( 'NONE', ( -2.811079983385294900, 38.99322649091135400, -28.30799595738871200 ) ) ; +#60219 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079881900, 60.16616330387870400, -28.27375072930956200 ) ) ; +#60220 = ORIENTED_EDGE ( 'NONE', *, *, #38071, .F. ) ; +#60221 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 30.94069092601379400, -28.35186440610857500 ) ) ; +#60222 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725669300, 26.43535825203924700, -28.53896444442197800 ) ) ; +#60223 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60224 = AXIS2_PLACEMENT_3D ( 'NONE', #7262, #50770, #13568 ) ; +#60225 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60227 = CONICAL_SURFACE ( 'NONE', #17677, 10.00000000000009200, 0.7853981633974447300 ) ; +#60228 = ORIENTED_EDGE ( 'NONE', *, *, #45062, .T. ) ; +#60229 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105668900, 24.54999999999998600, -28.70555803802994200 ) ) ; +#60230 = ORIENTED_EDGE ( 'NONE', *, *, #33562, .T. ) ; +#60231 = CARTESIAN_POINT ( 'NONE', ( -4.331040510084940300, 90.78519534244644300, -28.53901988778293500 ) ) ; +#60232 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37166, #31226, #43683, #6450 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904677865800E-007, 0.0006651184466338027700 ), + .UNSPECIFIED. ) ; +#60233 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#60234 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650651500, 41.51912043132465900, -28.30223257055582700 ) ) ; +#60235 = AXIS2_PLACEMENT_3D ( 'NONE', #34529, #78028, #40753 ) ; +#60236 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60237 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52354, #70882, #46103, #15125 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.321154511682636300E-016, 0.001179148174663072100 ), + .UNSPECIFIED. ) ; +#60238 = ADVANCED_FACE ( 'NONE', ( #11785 ), #75987, .T. ) ; +#60239 = EDGE_CURVE ( 'NONE', #17315, #46699, #42885, .T. ) ; +#60240 = FACE_OUTER_BOUND ( 'NONE', #9363, .T. ) ; +#60241 = FACE_OUTER_BOUND ( 'NONE', #11615, .T. ) ; +#60242 = EDGE_LOOP ( 'NONE', ( #16712, #68860, #65509 ) ) ; +#60243 = ORIENTED_EDGE ( 'NONE', *, *, #5193, .T. ) ; +#60244 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 55.16666666666665700, 0.9380355014189834000 ) ) ; +#60245 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715065800, 49.77966528189954000, -28.30868034705250100 ) ) ; +#60246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60247 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754800, 19.89456479767150300, -28.70555803802994200 ) ) ; +#60248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60249 = CONICAL_SURFACE ( 'NONE', #73840, 10.50000000000009600, 0.7853981633974500600 ) ; +#60250 = ORIENTED_EDGE ( 'NONE', *, *, #31185, .T. ) ; +#60251 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 57.46443389862717800, -28.54207364681943600 ) ) ; +#60252 = CIRCLE ( 'NONE', #44266, 9.500000000000099500 ) ; +#60253 = EDGE_LOOP ( 'NONE', ( #25697, #67096, #815, #52553 ) ) ; +#60255 = EDGE_CURVE ( 'NONE', #67715, #44515, #6909, .T. ) ; +#60254 = ORIENTED_EDGE ( 'NONE', *, *, #53070, .F. ) ; +#60256 = EDGE_CURVE ( 'NONE', #52833, #10918, #28363, .T. ) ; +#60257 = ORIENTED_EDGE ( 'NONE', *, *, #49236, .F. ) ; +#60258 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000010200, 9.418457393421036300, -28.68863412692833800 ) ) ; +#60259 = FACE_OUTER_BOUND ( 'NONE', #60448, .T. ) ; +#60260 = ORIENTED_EDGE ( 'NONE', *, *, #7921, .T. ) ; +#60261 = EDGE_LOOP ( 'NONE', ( #58666, #18078, #60670 ) ) ; +#60262 = ORIENTED_EDGE ( 'NONE', *, *, #57496, .F. ) ; +#60263 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .F. ) ; +#60264 = EDGE_LOOP ( 'NONE', ( #68331, #64887, #16811, #11882, #6685 ) ) ; +#60265 = CARTESIAN_POINT ( 'NONE', ( 17.36059854261447600, 49.66749699759768100, -28.25434854811490100 ) ) ; +#60266 = ORIENTED_EDGE ( 'NONE', *, *, #28153, .T. ) ; +#60267 = AXIS2_PLACEMENT_3D ( 'NONE', #48980, #11774, #55261 ) ; +#60268 = VERTEX_POINT ( 'NONE', #8671 ) ; +#60269 = EDGE_CURVE ( 'NONE', #64305, #43580, #7136, .T. ) ; +#60270 = EDGE_CURVE ( 'NONE', #55672, #76395, #9816, .T. ) ; +#60271 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60272 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60274 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571411600, 53.67681279774470200, -28.70555803803047500 ) ) ; +#60275 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60276 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 26.50000000000001100, -9.258116921287651700 ) ) ; +#60277 = CARTESIAN_POINT ( 'NONE', ( 1.616843969807190400, 54.80000000000003300, -28.70555803802997700 ) ) ; +#60278 = EDGE_CURVE ( 'NONE', #62090, #63313, #40953, .T. ) ; +#60279 = CONICAL_SURFACE ( 'NONE', #29793, 10.00000000000009400, 0.7853981633974447300 ) ; +#60280 = AXIS2_PLACEMENT_3D ( 'NONE', #5325, #48801, #54010 ) ; +#60281 = PLANE ( 'NONE', #17891 ) ; +#60282 = ORIENTED_EDGE ( 'NONE', *, *, #58217, .F. ) ; +#60283 = ORIENTED_EDGE ( 'NONE', *, *, #32424, .T. ) ; +#60284 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70092, #26620, #76356, #39073 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143690933400E-007, 0.0004559721418116968400 ), + .UNSPECIFIED. ) ; +#60285 = VERTEX_POINT ( 'NONE', #58733 ) ; +#60286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60287 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60289 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 80.13716795162660800, -28.48697406221657100 ) ) ; +#60290 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467482000, 9.268939712926288300, -28.57333386110744300 ) ) ; +#60291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36021, #73289, #48474, #11277 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.081668171172168500E-017, 0.001333132141678534900 ), + .UNSPECIFIED. ) ; +#60292 = FACE_OUTER_BOUND ( 'NONE', #42137, .T. ) ; +#60293 = AXIS2_PLACEMENT_3D ( 'NONE', #24893, #68400, #31160 ) ; +#60294 = CARTESIAN_POINT ( 'NONE', ( 12.06092805703280400, 10.00000000000006800, -28.70555803802998100 ) ) ; +#60295 = AXIS2_PLACEMENT_3D ( 'NONE', #65227, #27959, #71439 ) ; +#60296 = ORIENTED_EDGE ( 'NONE', *, *, #72667, .T. ) ; +#60297 = ADVANCED_FACE ( 'NONE', ( #24419 ), #22459, .T. ) ; +#60298 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655445700, 10.17701665379220800, -28.20555803802993500 ) ) ; +#60299 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3349, #40617, #9616, #53124 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710583081700E-007, 0.0008482615949373574100 ), + .UNSPECIFIED. ) ; +#60300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60301 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 61.00000000000001400, 3.794441961969998300 ) ) ; +#60302 = CONICAL_SURFACE ( 'NONE', #30665, 10.50000000000009600, 0.7853981633974500600 ) ; +#60303 = CARTESIAN_POINT ( 'NONE', ( 24.99999999997384100, 2.789805534718532000E-011, -19.62890550647759400 ) ) ; +#60304 = ORIENTED_EDGE ( 'NONE', *, *, #62493, .T. ) ; +#60305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60306 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 57.22261628933269200, -28.70555803802997700 ) ) ; +#60307 = ORIENTED_EDGE ( 'NONE', *, *, #75026, .F. ) ; +#60308 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052321100, 71.31766786975330800, -28.25051428653865700 ) ) ; +#60309 = ORIENTED_EDGE ( 'NONE', *, *, #20707, .F. ) ; +#60310 = CARTESIAN_POINT ( 'NONE', ( 3.704177143141925500, 9.519451428760932600, -28.52576311647852900 ) ) ; +#60311 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506423900, 20.51912043132477600, -28.30223257055572700 ) ) ; +#60312 = ADVANCED_FACE ( 'NONE', ( #57491 ), #70123, .F. ) ; +#60313 = CARTESIAN_POINT ( 'NONE', ( 16.63444121378045200, 50.77483928597535400, -28.57108397021914600 ) ) ; +#60314 = AXIS2_PLACEMENT_3D ( 'NONE', #57449, #20195, #63727 ) ; +#60315 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#60316 = EDGE_CURVE ( 'NONE', #33939, #8011, #5916, .T. ) ; +#60317 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14936, #58449, #21214, #64746 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904305303700E-007, 0.0006651184466334838000 ), + .UNSPECIFIED. ) ; +#60319 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841388100, 20.43650294695131500, -28.30782889147481300 ) ) ; +#60320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60322 = CARTESIAN_POINT ( 'NONE', ( -16.56790757632391500, 36.22927195446095500, -28.58363361004981600 ) ) ; +#60323 = CONICAL_SURFACE ( 'NONE', #33224, 10.50000000000009600, 0.7853981633974500600 ) ; +#60324 = ADVANCED_FACE ( 'NONE', ( #72122 ), #20506, .F. ) ; +#60325 = EDGE_CURVE ( 'NONE', #63152, #70940, #37034, .T. ) ; +#60326 = CONICAL_SURFACE ( 'NONE', #62440, 10.50000000000009600, 0.7853981633974500600 ) ; +#60327 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60328 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #40030 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #25260, #68766, #31516 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#60329 = ORIENTED_EDGE ( 'NONE', *, *, #27369, .F. ) ; +#60330 = AXIS2_PLACEMENT_3D ( 'NONE', #50269, #13067, #56546 ) ; +#60331 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#60332 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 69.28967419478898600, -28.59353418718932400 ) ) ; +#60333 = ORIENTED_EDGE ( 'NONE', *, *, #44951, .T. ) ; +#60334 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60335 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60336 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52214, #21265, #64795, #27527 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859863398300E-007, 0.0008759659331882474100 ), + .UNSPECIFIED. ) ; +#60337 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60338 = ADVANCED_FACE ( 'NONE', ( #53601 ), #51596, .F. ) ; +#60339 = CYLINDRICAL_SURFACE ( 'NONE', #56070, 10.00000000000000200 ) ; +#60340 = ORIENTED_EDGE ( 'NONE', *, *, #7655, .F. ) ; +#60341 = FACE_OUTER_BOUND ( 'NONE', #44030, .T. ) ; +#60342 = AXIS2_PLACEMENT_3D ( 'NONE', #50690, #13489, #56991 ) ; +#60343 = EDGE_LOOP ( 'NONE', ( #11251, #77424, #29867 ) ) ; +#60344 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60345 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 67.33333333333334300, -10.73183747965883100 ) ) ; +#60346 = CIRCLE ( 'NONE', #33453, 10.00000000000009400 ) ; +#60347 = ORIENTED_EDGE ( 'NONE', *, *, #71588, .F. ) ; +#60348 = ORIENTED_EDGE ( 'NONE', *, *, #80489, .F. ) ; +#60349 = EDGE_LOOP ( 'NONE', ( #6138, #46498, #51066 ) ) ; +#60350 = ORIENTED_EDGE ( 'NONE', *, *, #29654, .F. ) ; +#60352 = ORIENTED_EDGE ( 'NONE', *, *, #27884, .T. ) ; +#60351 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846183500, 80.79999999999982700, -28.55171188418389100 ) ) ; +#60353 = VERTEX_POINT ( 'NONE', #46997 ) ; +#60354 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 32.50000000000000700, 2.454695999814380200 ) ) ; +#60355 = AXIS2_PLACEMENT_3D ( 'NONE', #32742, #76258, #38970 ) ; +#60356 = VERTEX_POINT ( 'NONE', #65562 ) ; +#60357 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459582800, 52.51973550835659000, -28.70555803802997400 ) ) ; +#60358 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099050000, 20.53732497909462000, -28.41043597897460400 ) ) ; +#60359 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459450000, 79.08026449164309200, -28.70555803803004500 ) ) ; +#60360 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, -2.499999999999979100, 4.650848422521012700 ) ) ; +#60361 = ORIENTED_EDGE ( 'NONE', *, *, #26874, .T. ) ; +#60362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60363 = CONICAL_SURFACE ( 'NONE', #13567, 10.00000000000009200, 0.7853981633974447300 ) ; +#60364 = ORIENTED_EDGE ( 'NONE', *, *, #42038, .F. ) ; +#60365 = CARTESIAN_POINT ( 'NONE', ( -6.952121582421637100, 44.44999999999998900, -7.510944389258823700 ) ) ; +#60366 = ORIENTED_EDGE ( 'NONE', *, *, #18905, .F. ) ; +#60367 = EDGE_LOOP ( 'NONE', ( #43775, #30829, #12649, #69348, #27701 ) ) ; +#60368 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 34.83333333333333600, -4.152999154772353500 ) ) ; +#60369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60371 = LINE ( 'NONE', #4550, #10725 ) ; +#60372 = ORIENTED_EDGE ( 'NONE', *, *, #29022, .T. ) ; +#60373 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661478900, 49.49322649091141100, -28.30799595738882200 ) ) ; +#60374 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71712, #3404, #9679, #53180 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01103343117100363800, 0.01117762389919586800 ), + .UNSPECIFIED. ) ; +#60375 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60377 = ORIENTED_EDGE ( 'NONE', *, *, #56804, .T. ) ; +#60376 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60378 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760500, 10.52620220503713200, -28.70555803802992800 ) ) ; +#60379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60380 = CARTESIAN_POINT ( 'NONE', ( 24.51552888560742700, 5.242239103832941000, -21.78117265024494000 ) ) ; +#60381 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60382 = FACE_OUTER_BOUND ( 'NONE', #3402, .T. ) ; +#60383 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60384 = EDGE_LOOP ( 'NONE', ( #56265, #71254, #50096 ) ) ; +#60385 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60386 = EDGE_CURVE ( 'NONE', #56739, #28139, #3944, .T. ) ; +#60387 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60388 = EDGE_LOOP ( 'NONE', ( #65619, #8437, #68677 ) ) ; +#60389 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 101.5999999999999900, -18.70555803803001300 ) ) ; +#60390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60391 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 71.99560977511662000, -28.70555803802997700 ) ) ; +#60392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60393 = EDGE_CURVE ( 'NONE', #9301, #79214, #73481, .T. ) ; +#60394 = DIRECTION ( 'NONE', ( -1.000000000000000000, 2.511218746175895500E-014, 0.0000000000000000000 ) ) ; +#60395 = ADVANCED_FACE ( 'NONE', ( #68183 ), #65821, .T. ) ; +#60396 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#60397 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552400, 81.49769010897078700, -28.61774594594320900 ) ) ; +#60398 = EDGE_CURVE ( 'NONE', #59471, #78359, #59016, .T. ) ; +#60399 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6538, #12817, #19044, #62570 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217704504487900E-007, 0.0008482615949370187100 ), + .UNSPECIFIED. ) ; +#60400 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 60.79999999999998300, -28.55171188418376400 ) ) ; +#60401 = CARTESIAN_POINT ( 'NONE', ( 3.535499775902625400, 9.204283415895263300, -28.67591357691969400 ) ) ; +#60402 = AXIS2_PLACEMENT_3D ( 'NONE', #69913, #32660, #76170 ) ; +#60403 = FACE_OUTER_BOUND ( 'NONE', #46818, .T. ) ; +#60404 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 38.33333333333334300, -5.205558038030008400 ) ) ; +#60405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60406 = ORIENTED_EDGE ( 'NONE', *, *, #31078, .T. ) ; +#60407 = EDGE_LOOP ( 'NONE', ( #30590, #8866, #76974, #33866 ) ) ; +#60408 = PLANE ( 'NONE', #45004 ) ; +#60409 = ADVANCED_FACE ( 'NONE', ( #74065 ), #66261, .T. ) ; +#60410 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459497600, 62.51973550835651800, -28.70555803803009800 ) ) ; +#60411 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467680500, 30.26893971292316000, -28.57333386111099600 ) ) ; +#60412 = AXIS2_PLACEMENT_3D ( 'NONE', #33559, #77075, #39812 ) ; +#60413 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537349100, 61.25732391202402700, -28.20555803802997700 ) ) ; +#60414 = CARTESIAN_POINT ( 'NONE', ( -9.091732824364809700, 57.15000000000003400, 1.255522444989336100 ) ) ; +#60415 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61471, #11949, #74251, #36939 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927769500 ), + .UNSPECIFIED. ) ; +#60416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60417 = EDGE_CURVE ( 'NONE', #7245, #5138, #44505, .T. ) ; +#60418 = EDGE_CURVE ( 'NONE', #12694, #5301, #55542, .T. ) ; +#60419 = AXIS2_PLACEMENT_3D ( 'NONE', #74828, #286, #31332 ) ; +#60420 = CIRCLE ( 'NONE', #58097, 10.00000000000009600 ) ; +#60421 = ORIENTED_EDGE ( 'NONE', *, *, #77749, .F. ) ; +#60422 = EDGE_LOOP ( 'NONE', ( #53365, #75126, #38834 ) ) ; +#60423 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60425 = ADVANCED_FACE ( 'NONE', ( #38964 ), #53816, .T. ) ; +#60426 = CONICAL_SURFACE ( 'NONE', #38076, 10.00000000000009200, 0.7853981633974447300 ) ; +#60427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55781, #62070, #17, #43522 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052615776500E-007, 0.0003301033223275548900 ), + .UNSPECIFIED. ) ; +#60428 = ORIENTED_EDGE ( 'NONE', *, *, #25992, .T. ) ; +#60429 = CARTESIAN_POINT ( 'NONE', ( -22.52079167673663200, 6.239690436107736100, -25.29877424851630300 ) ) ; +#60430 = ORIENTED_EDGE ( 'NONE', *, *, #68344, .F. ) ; +#60431 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60432 = ORIENTED_EDGE ( 'NONE', *, *, #75955, .F. ) ; +#60433 = ORIENTED_EDGE ( 'NONE', *, *, #18776, .T. ) ; +#60434 = ADVANCED_FACE ( 'NONE', ( #7838 ), #37, .T. ) ; +#60436 = VERTEX_POINT ( 'NONE', #29130 ) ; +#60435 = EDGE_CURVE ( 'NONE', #64092, #1780, #30131, .T. ) ; +#60437 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818085700, 81.65075715145329100, -28.20555803803047800 ) ) ; +#60438 = AXIS2_PLACEMENT_3D ( 'NONE', #79669, #5144, #36165 ) ; +#60439 = AXIS2_PLACEMENT_3D ( 'NONE', #34072, #40051, #77589 ) ; +#60440 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70077, #63862, #20325, #76341 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210954000, 0.001517199873936107000 ), + .UNSPECIFIED. ) ; +#60442 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60443 = ADVANCED_FACE ( 'NONE', ( #33148 ), #47707, .F. ) ; +#60444 = FACE_OUTER_BOUND ( 'NONE', #44893, .T. ) ; +#60445 = VERTEX_POINT ( 'NONE', #17111 ) ; +#60446 = CARTESIAN_POINT ( 'NONE', ( 12.72730845928325700, 55.79999999999927200, -28.53979898350196700 ) ) ; +#60447 = VERTEX_POINT ( 'NONE', #60636 ) ; +#60448 = EDGE_LOOP ( 'NONE', ( #1742, #29778, #15922, #65538 ) ) ; +#60449 = EDGE_LOOP ( 'NONE', ( #12420, #6154, #7077, #65088, #63061, #2841 ) ) ; +#60450 = ORIENTED_EDGE ( 'NONE', *, *, #47964, .T. ) ; +#60451 = AXIS2_PLACEMENT_3D ( 'NONE', #18923, #70740, #67559 ) ; +#60452 = CONICAL_SURFACE ( 'NONE', #71762, 10.50000000000009600, 0.7853981633974500600 ) ; +#60453 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 6.833333333333335700, -6.205558038030004800 ) ) ; +#60454 = EDGE_LOOP ( 'NONE', ( #1398, #1616, #44101, #67807 ) ) ; +#60455 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 47.00000000000001400, -9.205558038030005700 ) ) ; +#60456 = EDGE_LOOP ( 'NONE', ( #8130, #865, #53134, #14145 ) ) ; +#60457 = AXIS2_PLACEMENT_3D ( 'NONE', #71526, #3227, #28043 ) ; +#60458 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60459 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60460 = CONICAL_SURFACE ( 'NONE', #19085, 10.50000000000009600, 0.7853981633974500600 ) ; +#60461 = EDGE_LOOP ( 'NONE', ( #79765, #37844, #43827, #46269, #26319 ) ) ; +#60462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60463 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#60464 = AXIS2_PLACEMENT_3D ( 'NONE', #11244, #54731, #17498 ) ; +#60465 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 15.94142842854265000, -28.20555803803025800 ) ) ; +#60466 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77690, #2889, #65485, #28239 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610226400, 0.0004765929656973752200 ), + .UNSPECIFIED. ) ; +#60467 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60468 = EDGE_CURVE ( 'NONE', #62498, #11257, #64316, .T. ) ; +#60469 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60470 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484952000, 52.31032580520978600, -28.59353418718928800 ) ) ; +#60471 = CARTESIAN_POINT ( 'NONE', ( 10.73680695938944000, 92.73236790253305600, -28.64516875322538100 ) ) ; +#60472 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.16749699759738200, -28.20555803803047800 ) ) ; +#60473 = AXIS2_PLACEMENT_3D ( 'NONE', #72648, #35403, #78913 ) ; +#60474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60475 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60476 = EDGE_LOOP ( 'NONE', ( #60906, #22626, #62822 ) ) ; +#60477 = VERTEX_POINT ( 'NONE', #73146 ) ; +#60478 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 61.65075715145215400, -28.20555803803047800 ) ) ; +#60479 = ORIENTED_EDGE ( 'NONE', *, *, #18655, .T. ) ; +#60480 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390045600, 90.13716795162662300, -28.48697406221649700 ) ) ; +#60481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60482 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282700, 9.746602415621900700, -28.20555803802992800 ) ) ; +#60483 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328251000, 79.66414768974043200, -28.38420446581291400 ) ) ; +#60484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60485 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972181700, 62.22511094383834500, -28.55192314908456600 ) ) ; +#60486 = CONICAL_SURFACE ( 'NONE', #21072, 10.00000000000009400, 0.7853981633974447300 ) ; +#60487 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60488 = ORIENTED_EDGE ( 'NONE', *, *, #56289, .F. ) ; +#60489 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451075600, 9.940690926013799000, -28.35186440610870300 ) ) ; +#60490 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60491 = VERTEX_POINT ( 'NONE', #23368 ) ; +#60492 = EDGE_CURVE ( 'NONE', #54597, #49905, #1982, .T. ) ; +#60493 = CARTESIAN_POINT ( 'NONE', ( -1.783306465195872300, 60.79999999999998300, -28.32841359973438600 ) ) ; +#60494 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609161200, 90.13716795162640900, -28.48697406221693000 ) ) ; +#60495 = ORIENTED_EDGE ( 'NONE', *, *, #56914, .T. ) ; +#60496 = CIRCLE ( 'NONE', #12024, 9.500000000000099500 ) ; +#60497 = EDGE_CURVE ( 'NONE', #80692, #64905, #15644, .T. ) ; +#60498 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ; +#60500 = ORIENTED_EDGE ( 'NONE', *, *, #63018, .F. ) ; +#60499 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484629000, 61.37838321498815500, -28.29547179040443800 ) ) ; +#60501 = ORIENTED_EDGE ( 'NONE', *, *, #12099, .T. ) ; +#60502 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60503 = ORIENTED_EDGE ( 'NONE', *, *, #22246, .T. ) ; +#60504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36399, #73696, #48894, #11689 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.184273249246103500E-005, 0.0007677744771232311500 ), + .UNSPECIFIED. ) ; +#60505 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274343100, 43.66464174796073600, -28.53896444442201400 ) ) ; +#60506 = CIRCLE ( 'NONE', #68737, 10.00000000000009200 ) ; +#60507 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#60508 = EDGE_CURVE ( 'NONE', #66170, #53536, #1151, .T. ) ; +#60509 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#60510 = EDGE_CURVE ( 'NONE', #68875, #31387, #67487, .T. ) ; +#60512 = VERTEX_POINT ( 'NONE', #54887 ) ; +#60511 = AXIS2_PLACEMENT_3D ( 'NONE', #11015, #54515, #17264 ) ; +#60513 = FACE_OUTER_BOUND ( 'NONE', #36191, .T. ) ; +#60514 = VERTEX_POINT ( 'NONE', #73672 ) ; +#60515 = ORIENTED_EDGE ( 'NONE', *, *, #2548, .T. ) ; +#60516 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18548, #55798, #37282, #31 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569554527400E-007, 0.0007596410370205056100 ), + .UNSPECIFIED. ) ; +#60517 = ORIENTED_EDGE ( 'NONE', *, *, #13565, .F. ) ; +#60518 = ORIENTED_EDGE ( 'NONE', *, *, #17646, .F. ) ; +#60519 = ADVANCED_FACE ( 'NONE', ( #49646 ), #62353, .F. ) ; +#60520 = CIRCLE ( 'NONE', #37278, 9.500000000000097700 ) ; +#60521 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 53.00000000000000700, -1.205558038030005300 ) ) ; +#60522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60523 = AXIS2_PLACEMENT_3D ( 'NONE', #18898, #62430, #25164 ) ; +#60524 = EDGE_CURVE ( 'NONE', #67289, #41092, #78915, .T. ) ; +#60525 = EDGE_CURVE ( 'NONE', #38435, #74524, #53008, .T. ) ; +#60526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60527 = EDGE_CURVE ( 'NONE', #52754, #42640, #38527, .T. ) ; +#60528 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#60529 = ADVANCED_FACE ( 'NONE', ( #16611 ), #12719, .F. ) ; +#60530 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 53.65857157145681800, -28.20555803803047800 ) ) ; +#60531 = AXIS2_PLACEMENT_3D ( 'NONE', #44957, #76010, #51206 ) ; +#60532 = CIRCLE ( 'NONE', #75331, 9.500000000000101300 ) ; +#60534 = ORIENTED_EDGE ( 'NONE', *, *, #63588, .T. ) ; +#60533 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60535 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60536 = EDGE_CURVE ( 'NONE', #23131, #22429, #29295, .T. ) ; +#60537 = AXIS2_PLACEMENT_3D ( 'NONE', #41025, #65796, #3748 ) ; +#60538 = AXIS2_PLACEMENT_3D ( 'NONE', #55686, #18452, #61986 ) ; +#60539 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60541 = ADVANCED_FACE ( 'NONE', ( #45743 ), #18165, .F. ) ; +#60540 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80031, #73786, #11771, #55257 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454532170500E-007, 0.0004559726636569475000 ), + .UNSPECIFIED. ) ; +#60542 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499865700, 59.83662311806175200, -28.37223523914899600 ) ) ; +#60543 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60544 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 24.33333333333335000, 4.294441961970000500 ) ) ; +#60545 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60546 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344057800, 17.92298334620733500, -28.20555803802993500 ) ) ; +#60547 = ORIENTED_EDGE ( 'NONE', *, *, #58557, .T. ) ; +#60548 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60550 = EDGE_LOOP ( 'NONE', ( #9772, #33877, #51255 ) ) ; +#60549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60551 = AXIS2_PLACEMENT_3D ( 'NONE', #70100, #32850, #76366 ) ; +#60552 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#60553 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3606, #59394, #53398, #16142 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.498374721940738900E-018, 0.001179148174662947400 ), + .UNSPECIFIED. ) ; +#60554 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344303800, 49.42298334620756600, -28.20555803802996700 ) ) ; +#60555 = CARTESIAN_POINT ( 'NONE', ( -21.25302106838599400, 101.4508288463315000, -20.48361083403092300 ) ) ; +#60556 = FACE_OUTER_BOUND ( 'NONE', #56263, .T. ) ; +#60557 = AXIS2_PLACEMENT_3D ( 'NONE', #38364, #51115, #13927 ) ; +#60558 = EDGE_LOOP ( 'NONE', ( #22005, #37352, #7477, #49966 ) ) ; +#60559 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754300, 29.20543520232828500, -28.70555803802994200 ) ) ; +#60560 = EDGE_LOOP ( 'NONE', ( #2414, #10202, #29440, #73600, #80093 ) ) ; +#60561 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 58.83333333333335000, -6.205558038030004800 ) ) ; +#60562 = CARTESIAN_POINT ( 'NONE', ( 24.10521839401738800, 5.447390802991326300, -22.88564861210934600 ) ) ; +#60563 = VECTOR ( 'NONE', #35565, 1000.000000000000000 ) ; +#60564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60565 = EDGE_LOOP ( 'NONE', ( #62300, #62923, #1391, #48991 ) ) ; +#60566 = ORIENTED_EDGE ( 'NONE', *, *, #33498, .F. ) ; +#60567 = VERTEX_POINT ( 'NONE', #61975 ) ; +#60568 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537167900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#60569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60570 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654376300, 61.52472935029864900, -28.39317435246151400 ) ) ; +#60571 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60572 = AXIS2_PLACEMENT_3D ( 'NONE', #68141, #30893, #74416 ) ; +#60573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60574 = CIRCLE ( 'NONE', #65082, 9.500000000000101300 ) ; +#60575 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60576 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60577 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 59.98922577050341000, -28.37255355648634500 ) ) ; +#60578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60579 = EDGE_LOOP ( 'NONE', ( #12896, #38822, #44013, #39767 ) ) ; +#60580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60581 = VERTEX_POINT ( 'NONE', #24696 ) ; +#60582 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 44.13556610137283100, -28.54207364681943900 ) ) ; +#60583 = FACE_OUTER_BOUND ( 'NONE', #8716, .T. ) ; +#60584 = AXIS2_PLACEMENT_3D ( 'NONE', #61030, #11250, #17505 ) ; +#60585 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 20.24660241562189000, -28.20555803802994200 ) ) ; +#60586 = ORIENTED_EDGE ( 'NONE', *, *, #75611, .F. ) ; +#60587 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730496000, 61.58737389638849900, -28.29936525552444900 ) ) ; +#60588 = VERTEX_POINT ( 'NONE', #30962 ) ; +#60589 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60590 = ORIENTED_EDGE ( 'NONE', *, *, #55000, .T. ) ; +#60591 = VERTEX_POINT ( 'NONE', #55674 ) ; +#60592 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11534, #61044, #36264, #55027 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697152790800E-007, 0.0008724363063898906500 ), + .UNSPECIFIED. ) ; +#60593 = PLANE ( 'NONE', #57297 ) ; +#60594 = CONICAL_SURFACE ( 'NONE', #57000, 10.50000000000009600, 0.7853981633974500600 ) ; +#60595 = ORIENTED_EDGE ( 'NONE', *, *, #42209, .F. ) ; +#60596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60597 = CARTESIAN_POINT ( 'NONE', ( -10.77884208558769800, 20.43523632220588100, -28.30315276798564700 ) ) ; +#60598 = CIRCLE ( 'NONE', #8568, 10.00000000000009400 ) ; +#60599 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#60600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60601 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60602 = ADVANCED_FACE ( 'NONE', ( #35132 ), #27317, .T. ) ; +#60603 = ORIENTED_EDGE ( 'NONE', *, *, #26198, .T. ) ; +#60604 = EDGE_CURVE ( 'NONE', #32617, #59803, #43808, .T. ) ; +#60605 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60606 = FACE_OUTER_BOUND ( 'NONE', #33981, .T. ) ; +#60607 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60608 = ORIENTED_EDGE ( 'NONE', *, *, #21843, .T. ) ; +#60609 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 65.16666666666668600, 9.794441961969994300 ) ) ; +#60610 = EDGE_CURVE ( 'NONE', #11257, #60797, #24127, .T. ) ; +#60611 = ADVANCED_FACE ( 'NONE', ( #31216 ), #58432, .F. ) ; +#60612 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 30.33333333333335000, -5.535685056952199400 ) ) ; +#60613 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#60614 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60615 = EDGE_CURVE ( 'NONE', #25204, #39956, #74984, .T. ) ; +#60616 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985148300, 46.50238095238093200, -28.70555803802996700 ) ) ; +#60617 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60618 = EDGE_CURVE ( 'NONE', #67505, #25931, #60420, .T. ) ; +#60619 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#60620 = EDGE_CURVE ( 'NONE', #20096, #51468, #18559, .T. ) ; +#60621 = EDGE_CURVE ( 'NONE', #54691, #14733, #10757, .T. ) ; +#60622 = CARTESIAN_POINT ( 'NONE', ( -9.084007566902247500, 44.45000000000013800, -1.215419428336508100 ) ) ; +#60623 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60624 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 32.66666666666667100, 4.294441961969993400 ) ) ; +#60625 = CARTESIAN_POINT ( 'NONE', ( 2.254548258615050500, 28.59617684379258800, -28.64146614751467400 ) ) ; +#60626 = ORIENTED_EDGE ( 'NONE', *, *, #6119, .T. ) ; +#60627 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571427900, 18.07141756547892100, -28.70555803802992800 ) ) ; +#60628 = EDGE_LOOP ( 'NONE', ( #22034, #46643, #63594, #43513, #24656 ) ) ; +#60629 = AXIS2_PLACEMENT_3D ( 'NONE', #11058, #17594, #11337 ) ; +#60630 = EDGE_CURVE ( 'NONE', #10382, #26644, #14655, .T. ) ; +#60631 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#60632 = EDGE_CURVE ( 'NONE', #2326, #29006, #9643, .T. ) ; +#60633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60634 = EDGE_CURVE ( 'NONE', #34575, #5295, #75954, .T. ) ; +#60635 = ORIENTED_EDGE ( 'NONE', *, *, #79097, .F. ) ; +#60636 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195808600, 42.59027028261223100, -28.70555803802997000 ) ) ; +#60638 = ADVANCED_FACE ( 'NONE', ( #76930 ), #75520, .T. ) ; +#60637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49363, #5897, #61935, #24658 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349281465900E-007, 0.0004318366892326852500 ), + .UNSPECIFIED. ) ; +#60639 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655445700, 10.17701665379220800, -28.20555803802993500 ) ) ; +#60640 = CARTESIAN_POINT ( 'NONE', ( 22.48891841669512800, 6.255539522195180200, -25.35435570179053500 ) ) ; +#60641 = CIRCLE ( 'NONE', #22021, 10.50000000000009600 ) ; +#60642 = ORIENTED_EDGE ( 'NONE', *, *, #33813, .F. ) ; +#60643 = FACE_OUTER_BOUND ( 'NONE', #72520, .T. ) ; +#60644 = VERTEX_POINT ( 'NONE', #19517 ) ; +#60645 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040000, 71.43250300240211500, -28.20555803803014400 ) ) ; +#60646 = CARTESIAN_POINT ( 'NONE', ( -10.46947945219829500, 91.59999999999999400, -28.70555803802999500 ) ) ; +#60647 = ORIENTED_EDGE ( 'NONE', *, *, #74825, .F. ) ; +#60648 = FACE_OUTER_BOUND ( 'NONE', #33285, .T. ) ; +#60649 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 71.52858243452105600, -28.70555803802997700 ) ) ; +#60650 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60651 = ORIENTED_EDGE ( 'NONE', *, *, #19479, .F. ) ; +#60652 = CARTESIAN_POINT ( 'NONE', ( 19.67589355184981400, 100.9517848888531700, -22.28727092413250300 ) ) ; +#60653 = ORIENTED_EDGE ( 'NONE', *, *, #68447, .T. ) ; +#60654 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052321900, 81.31766786975330800, -28.25051428653866000 ) ) ; +#60655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60656 = AXIS2_PLACEMENT_3D ( 'NONE', #43336, #6098, #49557 ) ; +#60657 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 80.16749699759769500, -28.20555803802997700 ) ) ; +#60658 = AXIS2_PLACEMENT_3D ( 'NONE', #63893, #26640, #70105 ) ; +#60659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60660 = FACE_OUTER_BOUND ( 'NONE', #34086, .T. ) ; +#60661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60662 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.62753447840813700, -28.38801640354867200 ) ) ; +#60663 = ORIENTED_EDGE ( 'NONE', *, *, #34899, .F. ) ; +#60664 = FACE_OUTER_BOUND ( 'NONE', #60740, .T. ) ; +#60665 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 36.16666666666668600, 0.9380355014189834000 ) ) ; +#60666 = ORIENTED_EDGE ( 'NONE', *, *, #65878, .T. ) ; +#60667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60669 = VERTEX_POINT ( 'NONE', #13542 ) ; +#60670 = ORIENTED_EDGE ( 'NONE', *, *, #2185, .T. ) ; +#60671 = CARTESIAN_POINT ( 'NONE', ( 18.01268492844091200, 28.80637265398670600, -28.24165217761325400 ) ) ; +#60672 = ORIENTED_EDGE ( 'NONE', *, *, #29423, .F. ) ; +#60673 = CONICAL_SURFACE ( 'NONE', #60688, 10.00000000000009600, 0.7853981633974482800 ) ; +#60674 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 74.79999999999975600, -28.70555803803030800 ) ) ; +#60675 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973411600, 57.33501542110249700, -28.70555803803001600 ) ) ; +#60676 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60677 = CARTESIAN_POINT ( 'NONE', ( -8.330711401340288100, 57.15000000000001300, -5.793976935732795000 ) ) ; +#60678 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 18.07141756547892100, -28.70555803802992800 ) ) ; +#60679 = ORIENTED_EDGE ( 'NONE', *, *, #65328, .F. ) ; +#60680 = ORIENTED_EDGE ( 'NONE', *, *, #10895, .T. ) ; +#60681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60682 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471848200, 41.46868088498121800, -28.51286550264512700 ) ) ; +#60683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60684 = ORIENTED_EDGE ( 'NONE', *, *, #45662, .T. ) ; +#60685 = EDGE_CURVE ( 'NONE', #42194, #11257, #61532, .T. ) ; +#60686 = FACE_OUTER_BOUND ( 'NONE', #5702, .T. ) ; +#60687 = CARTESIAN_POINT ( 'NONE', ( -24.42674536205603900, 5.286632557609529200, -22.04342891319835500 ) ) ; +#60688 = AXIS2_PLACEMENT_3D ( 'NONE', #42219, #36007, #23497 ) ; +#60689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65951, #66223, #22690, #28995 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276987918400E-007, 0.0007677744771234667500 ), + .UNSPECIFIED. ) ; +#60690 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428634700, 90.07141756547879700, -28.70555803803014400 ) ) ; +#60691 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804057200, 12.15857157145701000, -28.37229765499279200 ) ) ; +#60692 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109113200, 70.49763722318496700, -28.32100408376066600 ) ) ; +#60693 = CARTESIAN_POINT ( 'NONE', ( -10.62858178328637000, 90.16749699759768100, -28.25056166218020700 ) ) ; +#60694 = ADVANCED_FACE ( 'NONE', ( #73045 ), #6841, .T. ) ; +#60695 = AXIS2_PLACEMENT_3D ( 'NONE', #11941, #24451, #36670 ) ; +#60696 = FACE_OUTER_BOUND ( 'NONE', #74771, .T. ) ; +#60697 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856985400, 15.92318720225501300, -28.70555803802992800 ) ) ; +#60698 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60699 = ORIENTED_EDGE ( 'NONE', *, *, #6727, .F. ) ; +#60700 = ADVANCED_FACE ( 'NONE', ( #25362 ), #7508, .T. ) ; +#60701 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 4.666666666666678500, 3.124568980892192800 ) ) ; +#60702 = AXIS2_PLACEMENT_3D ( 'NONE', #61622, #49044, #67854 ) ; +#60703 = ORIENTED_EDGE ( 'NONE', *, *, #6653, .F. ) ; +#60704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60705 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 44.83333333333332100, 6.794441961969992500 ) ) ; +#60706 = CIRCLE ( 'NONE', #61589, 10.50000000000009900 ) ; +#60707 = ORIENTED_EDGE ( 'NONE', *, *, #68244, .F. ) ; +#60708 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60709 = CIRCLE ( 'NONE', #27923, 10.00000000000009200 ) ; +#60710 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655689600, 41.67701665379241400, -28.20555803802997400 ) ) ; +#60712 = EDGE_CURVE ( 'NONE', #45855, #23983, #47009, .T. ) ; +#60711 = ORIENTED_EDGE ( 'NONE', *, *, #30391, .T. ) ; +#60713 = ADVANCED_FACE ( 'NONE', ( #56470 ), #37960, .F. ) ; +#60714 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180781400, 69.94924284854683100, -28.20555803803030800 ) ) ; +#60715 = LINE ( 'NONE', #41763, #14961 ) ; +#60716 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 10.00000000000000900, -9.205558038030005700 ) ) ; +#60717 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#60718 = ORIENTED_EDGE ( 'NONE', *, *, #45047, .F. ) ; +#60719 = ORIENTED_EDGE ( 'NONE', *, *, #76473, .T. ) ; +#60720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60721 = VERTEX_POINT ( 'NONE', #51264 ) ; +#60722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60723 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049501800, 20.90771342879322600, -28.53891855579987100 ) ) ; +#60724 = ADVANCED_FACE ( 'NONE', ( #71069 ), #4886, .F. ) ; +#60725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#60727 = FACE_OUTER_BOUND ( 'NONE', #38762, .T. ) ; +#60726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60728 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60730 = EDGE_LOOP ( 'NONE', ( #26946, #69429, #12327 ) ) ; +#60731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60732 = EDGE_CURVE ( 'NONE', #49578, #48972, #21464, .T. ) ; +#60733 = CONICAL_SURFACE ( 'NONE', #24292, 10.00000000000009200, 0.7853981633974447300 ) ; +#60734 = EDGE_CURVE ( 'NONE', #4205, #58834, #8762, .T. ) ; +#60735 = ORIENTED_EDGE ( 'NONE', *, *, #56765, .T. ) ; +#60736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60738 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45226, #1727, #7983, #51482 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169391912883200E-007, 0.0008082646680356959300 ), + .UNSPECIFIED. ) ; +#60739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60740 = EDGE_LOOP ( 'NONE', ( #22313, #59350, #19814 ) ) ; +#60741 = ORIENTED_EDGE ( 'NONE', *, *, #28039, .F. ) ; +#60742 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#60743 = VERTEX_POINT ( 'NONE', #26593 ) ; +#60744 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24301, #80321, #37046, #80583 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465996977000E-007, 0.0004435563144346486300 ), + .UNSPECIFIED. ) ; +#60745 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655676200, 28.42298334620756600, -28.20555803802994500 ) ) ; +#60746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60747 = FACE_OUTER_BOUND ( 'NONE', #23976, .T. ) ; +#60748 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#60749 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#60750 = AXIS2_PLACEMENT_3D ( 'NONE', #46633, #9391, #52902 ) ; +#60751 = ORIENTED_EDGE ( 'NONE', *, *, #25717, .T. ) ; +#60752 = EDGE_CURVE ( 'NONE', #72226, #17822, #23400, .T. ) ; +#60753 = EDGE_CURVE ( 'NONE', #44976, #12178, #32573, .T. ) ; +#60754 = EDGE_CURVE ( 'NONE', #56892, #21619, #18127, .T. ) ; +#60755 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610913200, 80.49763722318499500, -28.32100408376067700 ) ) ; +#60756 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958200, 71.46283204837337200, -28.48697406221668500 ) ) ; +#60758 = ORIENTED_EDGE ( 'NONE', *, *, #46754, .F. ) ; +#60757 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66015, #78539, #47456, #10254 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131287496600 ), + .UNSPECIFIED. ) ; +#60759 = ORIENTED_EDGE ( 'NONE', *, *, #36292, .F. ) ; +#60760 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310475700, 51.49769010897087200, -28.61774594594330900 ) ) ; +#60761 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60762 = AXIS2_PLACEMENT_3D ( 'NONE', #38899, #1652, #45135 ) ; +#60763 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326900, 60.79999999999991200, -28.55171188418385200 ) ) ; +#60764 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#60765 = ORIENTED_EDGE ( 'NONE', *, *, #45201, .T. ) ; +#60766 = FACE_OUTER_BOUND ( 'NONE', #7568, .T. ) ; +#60767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60768 = CARTESIAN_POINT ( 'NONE', ( 2.832817182603681900, 90.56656192502381900, -28.37235298663061300 ) ) ; +#60769 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002500, 51.07757630314344500, -28.53861367218462400 ) ) ; +#60770 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540443800, 82.51973550835661800, -28.70555803802997400 ) ) ; +#60771 = AXIS2_PLACEMENT_3D ( 'NONE', #27210, #76956, #64486 ) ; +#60772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21131, #33615, #39871, #2585 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004721052600E-007, 0.0004089065559710139100 ), + .UNSPECIFIED. ) ; +#60773 = AXIS2_PLACEMENT_3D ( 'NONE', #51880, #14664, #58169 ) ; +#60774 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60775 = CIRCLE ( 'NONE', #29987, 10.50000000000009800 ) ; +#60776 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 71.96823913367204300, -28.70555803802997700 ) ) ; +#60777 = ORIENTED_EDGE ( 'NONE', *, *, #75386, .F. ) ; +#60778 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 50.83333333333335000, -3.349151577478984600 ) ) ; +#60779 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60780 = AXIS2_PLACEMENT_3D ( 'NONE', #73524, #48188, #54734 ) ; +#60781 = EDGE_CURVE ( 'NONE', #79471, #58270, #3642, .T. ) ; +#60782 = EDGE_LOOP ( 'NONE', ( #39737, #1303, #44758 ) ) ; +#60783 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38031, #31825, #50266, #776 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438868766400E-007, 0.0007763347809200336600 ), + .UNSPECIFIED. ) ; +#60785 = ORIENTED_EDGE ( 'NONE', *, *, #75834, .F. ) ; +#60784 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60786 = ADVANCED_FACE ( 'NONE', ( #69122 ), #2927, .T. ) ; +#60787 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60788 = FACE_OUTER_BOUND ( 'NONE', #66835, .T. ) ; +#60789 = ORIENTED_EDGE ( 'NONE', *, *, #75046, .F. ) ; +#60790 = CONICAL_SURFACE ( 'NONE', #32528, 10.50000000000009600, 0.7853981633974500600 ) ; +#60791 = EDGE_LOOP ( 'NONE', ( #36719, #31627, #34354, #17751 ) ) ; +#60792 = EDGE_CURVE ( 'NONE', #9178, #73072, #69953, .T. ) ; +#60793 = VERTEX_POINT ( 'NONE', #52074 ) ; +#60794 = CIRCLE ( 'NONE', #70911, 10.50000000000009600 ) ; +#60795 = CONICAL_SURFACE ( 'NONE', #53343, 10.50000000000009600, 0.7853981633974500600 ) ; +#60796 = AXIS2_PLACEMENT_3D ( 'NONE', #63538, #26281, #69756 ) ; +#60797 = VERTEX_POINT ( 'NONE', #77133 ) ; +#60798 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#60799 = ORIENTED_EDGE ( 'NONE', *, *, #61707, .F. ) ; +#60800 = ORIENTED_EDGE ( 'NONE', *, *, #4710, .T. ) ; +#60801 = ADVANCED_FACE ( 'NONE', ( #19492 ), #41876, .T. ) ; +#60802 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60803 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#60804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60805 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#60806 = CARTESIAN_POINT ( 'NONE', ( -11.51272810170978300, 81.47860083896995300, -28.56001287362839800 ) ) ; +#60807 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 22.16666666666668600, -4.152999154772358800 ) ) ; +#60808 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462811600, 60.34267608797633600, -28.20555803803030800 ) ) ; +#60809 = LINE ( 'NONE', #7291, #11169 ) ; +#60810 = ORIENTED_EDGE ( 'NONE', *, *, #29217, .T. ) ; +#60811 = AXIS2_PLACEMENT_3D ( 'NONE', #20153, #20417, #63953 ) ; +#60812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#60813 = CONICAL_SURFACE ( 'NONE', #24759, 10.50000000000009600, 0.7853981633974500600 ) ; +#60814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60815 = ORIENTED_EDGE ( 'NONE', *, *, #39660, .F. ) ; +#60816 = ADVANCED_FACE ( 'NONE', ( #52552 ), #17552, .T. ) ; +#60817 = ORIENTED_EDGE ( 'NONE', *, *, #77277, .T. ) ; +#60818 = ORIENTED_EDGE ( 'NONE', *, *, #50027, .F. ) ; +#60819 = ORIENTED_EDGE ( 'NONE', *, *, #7070, .F. ) ; +#60820 = EDGE_LOOP ( 'NONE', ( #17609, #68811, #50608, #76216, #21499 ) ) ; +#60821 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343285200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#60822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60823 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000460100, 18.16749699759770200, -28.20555803803009500 ) ) ; +#60824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60825 = ORIENTED_EDGE ( 'NONE', *, *, #24617, .T. ) ; +#60826 = CIRCLE ( 'NONE', #78321, 9.500000000000099500 ) ; +#60827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60828 = AXIS2_PLACEMENT_3D ( 'NONE', #59269, #22016, #65555 ) ; +#60829 = ADVANCED_FACE ( 'NONE', ( #36040 ), #21396, .T. ) ; +#60830 = CARTESIAN_POINT ( 'NONE', ( -11.50207502155148700, 90.99854748491394200, -28.70555803802997700 ) ) ; +#60831 = ORIENTED_EDGE ( 'NONE', *, *, #21716, .T. ) ; +#60832 = VERTEX_POINT ( 'NONE', #71143 ) ; +#60833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60834 = EDGE_CURVE ( 'NONE', #48264, #14357, #55511, .T. ) ; +#60835 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 56.66666666666667100, 3.124568980892192800 ) ) ; +#60836 = EDGE_LOOP ( 'NONE', ( #55414, #43495, #41889, #34404, #12753, #33119, #68821, #8634 ) ) ; +#60837 = CARTESIAN_POINT ( 'NONE', ( 18.26454230036461400, 3.470915399270702000, -26.30484836595918100 ) ) ; +#60838 = CARTESIAN_POINT ( 'NONE', ( -4.266526781883532000, 39.20564881207762700, -28.41114655922299500 ) ) ; +#60839 = ORIENTED_EDGE ( 'NONE', *, *, #10359, .T. ) ; +#60840 = CONICAL_SURFACE ( 'NONE', #25745, 10.50000000000009600, 0.7853981633974500600 ) ; +#60841 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#60842 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543000, 71.32559822014178500, -28.29986836858017400 ) ) ; +#60843 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510346100, 49.65930907398620800, -28.35186440610858900 ) ) ; +#60844 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60845 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091593000, 32.57425125164785100, -28.70555803803001300 ) ) ; +#60846 = PLANE ( 'NONE', #48067 ) ; +#60847 = CARTESIAN_POINT ( 'NONE', ( 16.99797127827561400, 9.810914768184741100, -28.25432823872348100 ) ) ; +#60848 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 28.57141756547892100, -28.70555803802994200 ) ) ; +#60849 = CARTESIAN_POINT ( 'NONE', ( -10.83955045171894200, 60.46231468379674100, -28.37082013777818900 ) ) ; +#60850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80181, #36644, #49131, #11915 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137488681300 ), + .UNSPECIFIED. ) ; +#60851 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#60852 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851103000, 15.00238095238043800, -28.70555803802992800 ) ) ; +#60853 = EDGE_CURVE ( 'NONE', #17209, #30974, #50591, .T. ) ; +#60854 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#60855 = FACE_OUTER_BOUND ( 'NONE', #45254, .T. ) ; +#60856 = EDGE_CURVE ( 'NONE', #8099, #65275, #67188, .T. ) ; +#60857 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467482000, 9.268939712926288300, -28.57333386110744300 ) ) ; +#60858 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#60859 = VERTEX_POINT ( 'NONE', #40397 ) ; +#60860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#60861 = FACE_OUTER_BOUND ( 'NONE', #35067, .T. ) ; +#60862 = AXIS2_PLACEMENT_3D ( 'NONE', #77825, #28087, #34315 ) ; +#60863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#60864 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#60865 = EDGE_CURVE ( 'NONE', #62732, #28313, #34082, .T. ) ; +#60866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76989, #33473, #2441, #45960 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723538600, 0.0008252574424209111300 ), + .UNSPECIFIED. ) ; +#60867 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100675500, 20.97636006919908500, -28.38670679782165600 ) ) ; +#60869 = EDGE_LOOP ( 'NONE', ( #7759, #64467, #60963 ) ) ; +#60868 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60870 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274455300, 80.30622828441261200, -28.24172590004350500 ) ) ; +#60871 = EDGE_CURVE ( 'NONE', #66062, #8848, #41056, .T. ) ; +#60872 = FACE_OUTER_BOUND ( 'NONE', #75240, .T. ) ; +#60873 = AXIS2_PLACEMENT_3D ( 'NONE', #54817, #23848, #11335 ) ; +#60874 = CIRCLE ( 'NONE', #33002, 10.00000000000009200 ) ; +#60875 = ORIENTED_EDGE ( 'NONE', *, *, #26094, .T. ) ; +#60876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60877 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 62.99999999999999300, -12.20555803803000200 ) ) ; +#60878 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37474, #74780, #6497, #49975 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007365383014251031000, 0.0008826254138086257700 ), + .UNSPECIFIED. ) ; +#60879 = CONICAL_SURFACE ( 'NONE', #50502, 10.50000000000009800, 0.7853981633974518300 ) ; +#60880 = ORIENTED_EDGE ( 'NONE', *, *, #9338, .T. ) ; +#60881 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 61.08083798124328500, -28.45106778992438000 ) ) ; +#60882 = ORIENTED_EDGE ( 'NONE', *, *, #30792, .F. ) ; +#60883 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 28.16666666666667500, 3.794441961969996900 ) ) ; +#60884 = AXIS2_PLACEMENT_3D ( 'NONE', #77947, #52907, #34446 ) ; +#60885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60887 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76949, #45631, #27205, #14939 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662943900 ), + .UNSPECIFIED. ) ; +#60888 = EDGE_CURVE ( 'NONE', #71559, #45119, #54528, .T. ) ; +#60890 = FACE_OUTER_BOUND ( 'NONE', #72506, .T. ) ; +#60889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60891 = EDGE_CURVE ( 'NONE', #46777, #11959, #26623, .T. ) ; +#60893 = CIRCLE ( 'NONE', #72683, 9.500000000000101300 ) ; +#60892 = AXIS2_PLACEMENT_3D ( 'NONE', #2304, #33344, #39590 ) ; +#60894 = CARTESIAN_POINT ( 'NONE', ( -2.279233496942125700, 70.09951448976268300, -28.63282631410022800 ) ) ; +#60895 = ORIENTED_EDGE ( 'NONE', *, *, #14899, .F. ) ; +#60896 = ORIENTED_EDGE ( 'NONE', *, *, #22840, .T. ) ; +#60897 = CARTESIAN_POINT ( 'NONE', ( -6.511089597118251000, 44.44999999999998900, 3.917782571671938100 ) ) ; +#60898 = CARTESIAN_POINT ( 'NONE', ( -15.04683942065165400, 9.906321158696684400, -28.70522894562343600 ) ) ; +#60899 = VERTEX_POINT ( 'NONE', #78219 ) ; +#60900 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 30.50000000000000400, -9.258116921287651700 ) ) ; +#60901 = ORIENTED_EDGE ( 'NONE', *, *, #5597, .F. ) ; +#60902 = VERTEX_POINT ( 'NONE', #34707 ) ; +#60903 = EDGE_CURVE ( 'NONE', #5132, #36509, #39936, .T. ) ; +#60904 = CONICAL_SURFACE ( 'NONE', #48940, 10.50000000000009900, 0.7853981633974518300 ) ; +#60905 = AXIS2_PLACEMENT_3D ( 'NONE', #65680, #9893, #78174 ) ; +#60906 = ORIENTED_EDGE ( 'NONE', *, *, #17799, .F. ) ; +#60907 = AXIS2_PLACEMENT_3D ( 'NONE', #44755, #7518, #51017 ) ; +#60908 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60909 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752687600, 69.51229806853763200, -28.47147304844863000 ) ) ; +#60910 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#60911 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60913 = CARTESIAN_POINT ( 'NONE', ( 20.25318837172750000, 7.373405819788472600, -27.21461353857644400 ) ) ; +#60914 = FACE_OUTER_BOUND ( 'NONE', #78126, .T. ) ; +#60915 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60916 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511819400, 69.60439022488353100, -28.70555803803030800 ) ) ; +#60917 = EDGE_LOOP ( 'NONE', ( #61386, #72747, #61422, #58213 ) ) ; +#60918 = CIRCLE ( 'NONE', #59582, 10.00000000000009400 ) ; +#60919 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846538500, 19.60079448659409700, -28.70555803802994200 ) ) ; +#60920 = CARTESIAN_POINT ( 'NONE', ( -9.497924978448507400, 90.99854748491394200, -28.70555803802997700 ) ) ; +#60921 = CARTESIAN_POINT ( 'NONE', ( 18.37777428491923400, 98.35615017928711300, -26.08321359643188900 ) ) ; +#60922 = ADVANCED_FACE ( 'NONE', ( #65264 ), #46696, .T. ) ; +#60923 = CARTESIAN_POINT ( 'NONE', ( 12.14815378900369900, 85.79999999999951400, -28.37148172714619700 ) ) ; +#60924 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#60925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13116, #25629, #75631, #38347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572484426000E-007, 0.0004669842289003619800 ), + .UNSPECIFIED. ) ; +#60926 = ADVANCED_FACE ( 'NONE', ( #973 ), #13661, .T. ) ; +#60927 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489670800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#60928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60929 = AXIS2_PLACEMENT_3D ( 'NONE', #68665, #6641, #19161 ) ; +#60930 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 34.00000000000001400, -1.205558038030005300 ) ) ; +#60931 = CONICAL_SURFACE ( 'NONE', #39681, 10.00000000000009200, 0.7853981633974447300 ) ; +#60932 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60933 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346247200, 51.39409401757625800, -28.39369363572360100 ) ) ; +#60934 = FACE_OUTER_BOUND ( 'NONE', #12108, .T. ) ; +#60935 = ORIENTED_EDGE ( 'NONE', *, *, #29654, .T. ) ; +#60936 = CIRCLE ( 'NONE', #75451, 10.00000000000009400 ) ; +#60937 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109264300, 30.62856921007284000, -28.37063977681167500 ) ) ; +#60938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60939 = AXIS2_PLACEMENT_3D ( 'NONE', #14601, #76334, #51813 ) ; +#60940 = CARTESIAN_POINT ( 'NONE', ( -2.368180934154614300, 57.15000000000002700, -10.33278949099261200 ) ) ; +#60941 = ORIENTED_EDGE ( 'NONE', *, *, #25105, .F. ) ; +#60942 = EDGE_CURVE ( 'NONE', #27401, #62131, #12148, .T. ) ; +#60943 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#60944 = CONICAL_SURFACE ( 'NONE', #67181, 10.00000000000009400, 0.7853981633974447300 ) ; +#60945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60946 = CONICAL_SURFACE ( 'NONE', #76725, 10.50000000000009600, 0.7853981633974482800 ) ; +#60947 = EDGE_LOOP ( 'NONE', ( #25351, #56387, #43872, #55119, #10074, #41810, #72922 ) ) ; +#60948 = CARTESIAN_POINT ( 'NONE', ( 10.12141251450012900, 51.76337688193765300, -28.37223523914919800 ) ) ; +#60949 = CIRCLE ( 'NONE', #63569, 10.00000000000009200 ) ; +#60951 = ORIENTED_EDGE ( 'NONE', *, *, #19479, .T. ) ; +#60950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60952 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60953 = ORIENTED_EDGE ( 'NONE', *, *, #52385, .T. ) ; +#60954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#60955 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61133, #17610, #23866, #67370 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885342900 ), + .UNSPECIFIED. ) ; +#60956 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387498000, 86.46717019299367700, -28.53914313452682800 ) ) ; +#60957 = FACE_OUTER_BOUND ( 'NONE', #49958, .T. ) ; +#60958 = CONICAL_SURFACE ( 'NONE', #18921, 10.00000000000009400, 0.7853981633974447300 ) ; +#60959 = ORIENTED_EDGE ( 'NONE', *, *, #2781, .T. ) ; +#60960 = EDGE_CURVE ( 'NONE', #28510, #70776, #78482, .T. ) ; +#60961 = ORIENTED_EDGE ( 'NONE', *, *, #527, .T. ) ; +#60962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60963 = ORIENTED_EDGE ( 'NONE', *, *, #1731, .T. ) ; +#60965 = EDGE_CURVE ( 'NONE', #67043, #26714, #32134, .T. ) ; +#60964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3724, #41008, #53513, #16265 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782231300, 0.0004366687057304556000 ), + .UNSPECIFIED. ) ; +#60966 = ORIENTED_EDGE ( 'NONE', *, *, #10556, .T. ) ; +#60967 = CIRCLE ( 'NONE', #3665, 10.00000000000009200 ) ; +#60968 = FACE_OUTER_BOUND ( 'NONE', #48492, .T. ) ; +#60969 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 2.500000000000000400, -4.865812075874393000 ) ) ; +#60970 = ORIENTED_EDGE ( 'NONE', *, *, #9210, .F. ) ; +#60971 = ORIENTED_EDGE ( 'NONE', *, *, #16635, .F. ) ; +#60972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#60973 = EDGE_CURVE ( 'NONE', #32148, #10062, #48644, .T. ) ; +#60974 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60975 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 42.66666666666667100, -8.133761268305512700 ) ) ; +#60976 = EDGE_CURVE ( 'NONE', #11554, #79578, #64017, .T. ) ; +#60977 = ORIENTED_EDGE ( 'NONE', *, *, #42944, .T. ) ; +#60978 = CIRCLE ( 'NONE', #22158, 10.00000000000009200 ) ; +#60979 = AXIS2_PLACEMENT_3D ( 'NONE', #55811, #80581, #68329 ) ; +#60981 = VERTEX_POINT ( 'NONE', #41731 ) ; +#60980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60982 = ORIENTED_EDGE ( 'NONE', *, *, #5979, .F. ) ; +#60983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60984 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 87.94142842854303400, -28.20555803803030800 ) ) ; +#60985 = CONICAL_SURFACE ( 'NONE', #30863, 10.00000000000009200, 0.7853981633974447300 ) ; +#60986 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 7.833333333333348100, 6.794441961969992500 ) ) ; +#60987 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#60988 = CARTESIAN_POINT ( 'NONE', ( 17.03178561562193800, 51.31767869357295100, -28.25052235028445200 ) ) ; +#60989 = AXIS2_PLACEMENT_3D ( 'NONE', #71523, #34541, #28040 ) ; +#60990 = EDGE_CURVE ( 'NONE', #48654, #12178, #15590, .T. ) ; +#60992 = EDGE_LOOP ( 'NONE', ( #63957, #58221, #24708, #21239, #69285, #32455, #57329 ) ) ; +#60991 = EDGE_CURVE ( 'NONE', #48441, #35350, #49481, .T. ) ; +#60993 = EDGE_CURVE ( 'NONE', #27031, #73156, #63299, .T. ) ; +#60994 = ADVANCED_FACE ( 'NONE', ( #79830 ), #79290, .T. ) ; +#60995 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#60997 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008000, 26.44142842854304100, -28.20555803802994200 ) ) ; +#60996 = AXIS2_PLACEMENT_3D ( 'NONE', #28934, #66161, #59639 ) ; +#60998 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#60999 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.80000000000008600, -28.70555803802994200 ) ) ; +#61000 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61001 = AXIS2_PLACEMENT_3D ( 'NONE', #67257, #30037, #73522 ) ; +#61002 = CONICAL_SURFACE ( 'NONE', #36014, 10.00000000000009200, 0.7853981633974447300 ) ; +#61003 = ORIENTED_EDGE ( 'NONE', *, *, #39138, .F. ) ; +#61004 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651225500, 61.99560977511662700, -28.70555803803014400 ) ) ; +#61005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61006 = CONICAL_SURFACE ( 'NONE', #42015, 10.50000000000009600, 0.7853981633974500600 ) ; +#61007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61008 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61009 = AXIS2_PLACEMENT_3D ( 'NONE', #26719, #70192, #32942 ) ; +#61010 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301600, 56.79999999999963500, -28.70555803802997700 ) ) ; +#61011 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000034200, 60.69949493661177100, -28.70555803802997700 ) ) ; +#61012 = ORIENTED_EDGE ( 'NONE', *, *, #7557, .T. ) ; +#61013 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61014 = EDGE_CURVE ( 'NONE', #45918, #71496, #30220, .T. ) ; +#61016 = ORIENTED_EDGE ( 'NONE', *, *, #5215, .T. ) ; +#61015 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091596200, 48.02574874835215000, -28.70555803803001300 ) ) ; +#61017 = ADVANCED_FACE ( 'NONE', ( #61356 ), #42804, .F. ) ; +#61018 = CONICAL_SURFACE ( 'NONE', #63447, 10.50000000000009600, 0.7853981633974518300 ) ; +#61019 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61020 = PLANE ( 'NONE', #74443 ) ; +#61021 = AXIS2_PLACEMENT_3D ( 'NONE', #38944, #1690, #45175 ) ; +#61022 = CARTESIAN_POINT ( 'NONE', ( 16.29446774118121900, 93.51865524770634900, -28.53771223658352000 ) ) ; +#61023 = AXIS2_PLACEMENT_3D ( 'NONE', #65296, #40489, #21746 ) ; +#61024 = ORIENTED_EDGE ( 'NONE', *, *, #16053, .T. ) ; +#61025 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#61026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57071, #19808, #75813, #38521 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610433000, 0.0004765929656973908300 ), + .UNSPECIFIED. ) ; +#61027 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61028 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 20.24660241562189400, -28.20555803802994200 ) ) ; +#61029 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#61030 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#61031 = FACE_OUTER_BOUND ( 'NONE', #22469, .T. ) ; +#61032 = CIRCLE ( 'NONE', #42280, 10.50000000000009600 ) ; +#61033 = ORIENTED_EDGE ( 'NONE', *, *, #48931, .F. ) ; +#61034 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999990600, 87.60073525436762100, -28.70555803803001600 ) ) ; +#61035 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#61036 = CARTESIAN_POINT ( 'NONE', ( -16.11476726930881800, 91.05074060643370600, -28.65717938149375500 ) ) ; +#61037 = CARTESIAN_POINT ( 'NONE', ( 3.867853815109265200, 20.12856921007284000, -28.37063977681166400 ) ) ; +#61038 = ORIENTED_EDGE ( 'NONE', *, *, #10357, .F. ) ; +#61039 = CARTESIAN_POINT ( 'NONE', ( 2.042760264135989400, 75.79999999999998300, -28.53819074160730600 ) ) ; +#61040 = ORIENTED_EDGE ( 'NONE', *, *, #59644, .T. ) ; +#61041 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188355200, 30.89435118792235000, -28.41114655922300300 ) ) ; +#61042 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#61043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61044 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804059000, 22.65857157145701000, -28.37229765499279600 ) ) ; +#61045 = ADVANCED_FACE ( 'NONE', ( #77868 ), #48499, .T. ) ; +#61046 = CIRCLE ( 'NONE', #75173, 10.50000000000009800 ) ; +#61047 = ORIENTED_EDGE ( 'NONE', *, *, #26906, .F. ) ; +#61048 = ORIENTED_EDGE ( 'NONE', *, *, #44953, .T. ) ; +#61049 = ORIENTED_EDGE ( 'NONE', *, *, #34687, .T. ) ; +#61050 = ORIENTED_EDGE ( 'NONE', *, *, #15346, .F. ) ; +#61051 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849331700, 28.77966528189953300, -28.30868034705249100 ) ) ; +#61052 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61121, #5343, #24121, #67625 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401231300, 0.004682530427071134400 ), + .UNSPECIFIED. ) ; +#61053 = EDGE_LOOP ( 'NONE', ( #15538, #23873, #28304 ) ) ; +#61054 = FACE_OUTER_BOUND ( 'NONE', #5433, .T. ) ; +#61055 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 48.66666666666667900, 2.794441961969992100 ) ) ; +#61056 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61057 = VERTEX_POINT ( 'NONE', #23805 ) ; +#61058 = ORIENTED_EDGE ( 'NONE', *, *, #30835, .T. ) ; +#61059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61060 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#61061 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#61062 = EDGE_CURVE ( 'NONE', #23751, #41582, #75908, .T. ) ; +#61063 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 49.13176086632793700, -28.70555803802996700 ) ) ; +#61064 = CIRCLE ( 'NONE', #12764, 10.00000000000009200 ) ; +#61065 = ORIENTED_EDGE ( 'NONE', *, *, #31784, .F. ) ; +#61066 = AXIS2_PLACEMENT_3D ( 'NONE', #32585, #63891, #26637 ) ; +#61067 = ORIENTED_EDGE ( 'NONE', *, *, #747, .T. ) ; +#61068 = CARTESIAN_POINT ( 'NONE', ( -2.233092656309832800, 85.79999999999988300, -28.70555803803014400 ) ) ; +#61069 = ORIENTED_EDGE ( 'NONE', *, *, #51750, .T. ) ; +#61070 = CONICAL_SURFACE ( 'NONE', #31348, 10.00000000000009200, 0.7853981633974447300 ) ; +#61071 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18112, #67882, #80400, #43112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418643000, 0.001049055495481820400 ), + .UNSPECIFIED. ) ; +#61072 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362702900, 84.03471854269754700, -28.66119098264627100 ) ) ; +#61073 = FACE_OUTER_BOUND ( 'NONE', #46501, .T. ) ; +#61074 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 41.43250300240230600, -28.20555803802997700 ) ) ; +#61076 = ORIENTED_EDGE ( 'NONE', *, *, #42365, .T. ) ; +#61075 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61078 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#61079 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 20.00000000000000000, -1.205558038030002800 ) ) ; +#61080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61083 = EDGE_CURVE ( 'NONE', #40939, #59094, #35105, .T. ) ; +#61084 = CIRCLE ( 'NONE', #61523, 9.500000000000097700 ) ; +#61085 = EDGE_LOOP ( 'NONE', ( #38676, #17917, #78685, #18646, #9091 ) ) ; +#61086 = EDGE_CURVE ( 'NONE', #57293, #59886, #11705, .T. ) ; +#61087 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#61088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61089 = FACE_OUTER_BOUND ( 'NONE', #62930, .T. ) ; +#61090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61091 = EDGE_CURVE ( 'NONE', #70940, #3423, #44717, .T. ) ; +#61092 = ORIENTED_EDGE ( 'NONE', *, *, #5901, .F. ) ; +#61093 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25450, #62708, #44143, #6928 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287015068700E-007, 0.0007303759720927572100 ), + .UNSPECIFIED. ) ; +#61094 = ADVANCED_FACE ( 'NONE', ( #28277 ), #7753, .T. ) ; +#61095 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 9.932503002402292200, -28.20555803802994200 ) ) ; +#61096 = EDGE_CURVE ( 'NONE', #146, #20052, #24334, .T. ) ; +#61097 = AXIS2_PLACEMENT_3D ( 'NONE', #25483, #68976, #32808 ) ; +#61098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61099 = CONICAL_SURFACE ( 'NONE', #55723, 10.50000000000009600, 0.7853981633974482800 ) ; +#61100 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 54.50000000000001400, -4.865812075874393000 ) ) ; +#61101 = ORIENTED_EDGE ( 'NONE', *, *, #13883, .F. ) ; +#61102 = EDGE_CURVE ( 'NONE', #5932, #77818, #73988, .T. ) ; +#61103 = CARTESIAN_POINT ( 'NONE', ( 16.63972831208273500, 8.360271687921809300, -28.62410630009216600 ) ) ; +#61104 = CARTESIAN_POINT ( 'NONE', ( -11.51258998854903800, 80.12140959736000000, -28.55996453402214300 ) ) ; +#61105 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109257600, 28.97143078992715500, -28.37063977681166400 ) ) ; +#61106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61107 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61108 = VERTEX_POINT ( 'NONE', #55314 ) ; +#61109 = ADVANCED_FACE ( 'NONE', ( #9737 ), #22381, .T. ) ; +#61110 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 80.13716795162658000, -28.48697406221667800 ) ) ; +#61111 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61112 = AXIS2_PLACEMENT_3D ( 'NONE', #29168, #72645, #35398 ) ; +#61113 = EDGE_CURVE ( 'NONE', #45374, #35860, #38888, .T. ) ; +#61114 = EDGE_CURVE ( 'NONE', #74602, #1090, #26310, .T. ) ; +#61115 = CARTESIAN_POINT ( 'NONE', ( -10.79205576049498600, 17.69228657120670100, -28.53891855579991000 ) ) ; +#61116 = EDGE_CURVE ( 'NONE', #50347, #43942, #20622, .T. ) ; +#61117 = CARTESIAN_POINT ( 'NONE', ( 2.118370688913196600E-013, 78.39962244433161200, -28.53664883431616100 ) ) ; +#61118 = FACE_OUTER_BOUND ( 'NONE', #66416, .T. ) ; +#61119 = FACE_OUTER_BOUND ( 'NONE', #65808, .T. ) ; +#61120 = ORIENTED_EDGE ( 'NONE', *, *, #29300, .T. ) ; +#61121 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.36203212531321700, -28.38801640354855800 ) ) ; +#61122 = CARTESIAN_POINT ( 'NONE', ( -3.221157914412283500, 20.43523632220588100, -28.30315276798565100 ) ) ; +#61123 = VERTEX_POINT ( 'NONE', #49558 ) ; +#61124 = AXIS2_PLACEMENT_3D ( 'NONE', #61934, #55645, #30659 ) ; +#61125 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#61126 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61127 = ORIENTED_EDGE ( 'NONE', *, *, #80616, .F. ) ; +#61128 = ADVANCED_FACE ( 'NONE', ( #72041 ), #36954, .F. ) ; +#61129 = ORIENTED_EDGE ( 'NONE', *, *, #31412, .F. ) ; +#61130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61131 = ORIENTED_EDGE ( 'NONE', *, *, #27436, .F. ) ; +#61132 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999988500, 16.39962244433175400, -28.53664883431606500 ) ) ; +#61133 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 64.37738371066728900, -28.70555803802997700 ) ) ; +#61134 = EDGE_CURVE ( 'NONE', #63300, #29011, #70047, .T. ) ; +#61135 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.79999999999951400, -28.20555803803047800 ) ) ; +#61136 = AXIS2_PLACEMENT_3D ( 'NONE', #72350, #35096, #78602 ) ; +#61137 = AXIS2_PLACEMENT_3D ( 'NONE', #23227, #66753, #29513 ) ; +#61138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#61139 = ORIENTED_EDGE ( 'NONE', *, *, #2698, .F. ) ; +#61140 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#61141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61142 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.36762008758047700, -28.26633708900882900 ) ) ; +#61143 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000043100, 70.90050506338806700, -28.70555803803014400 ) ) ; +#61144 = ADVANCED_FACE ( 'NONE', ( #53519 ), #68108, .T. ) ; +#61145 = CIRCLE ( 'NONE', #5319, 9.500000000000097700 ) ; +#61146 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .T. ) ; +#61147 = EDGE_LOOP ( 'NONE', ( #28049, #49713, #13519 ) ) ; +#61148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61150 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 60.83333333333335000, 9.794441961969999600 ) ) ; +#61151 = ORIENTED_EDGE ( 'NONE', *, *, #22961, .T. ) ; +#61152 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55033, #11538, #24047, #67552 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438961565800E-007, 0.0007763347809200321400 ), + .UNSPECIFIED. ) ; +#61153 = CIRCLE ( 'NONE', #33399, 10.00000000000009400 ) ; +#61154 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 26.00000000000001100, -6.205558038030003100 ) ) ; +#61155 = AXIS2_PLACEMENT_3D ( 'NONE', #60154, #47860, #10645 ) ; +#61156 = CARTESIAN_POINT ( 'NONE', ( -12.72730845928327200, 75.79999999999998300, -28.53979898350160500 ) ) ; +#61157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61158 = EDGE_LOOP ( 'NONE', ( #44543, #75675, #63214, #24942 ) ) ; +#61159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61161 = AXIS2_PLACEMENT_3D ( 'NONE', #3130, #28219, #77679 ) ; +#61162 = CIRCLE ( 'NONE', #57808, 10.50000000000009200 ) ; +#61163 = ORIENTED_EDGE ( 'NONE', *, *, #41424, .F. ) ; +#61164 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823696000, 17.19543746431594000, -28.61277292027076400 ) ) ; +#61165 = EDGE_CURVE ( 'NONE', #37167, #13206, #20435, .T. ) ; +#61166 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 28.33333333333334600, 8.320721403598817300 ) ) ; +#61167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61168 = AXIS2_PLACEMENT_3D ( 'NONE', #73208, #11199, #54688 ) ; +#61169 = ORIENTED_EDGE ( 'NONE', *, *, #4250, .T. ) ; +#61170 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#61171 = ORIENTED_EDGE ( 'NONE', *, *, #71480, .F. ) ; +#61172 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122131200, 18.57332680091207100, -28.37233769390152800 ) ) ; +#61173 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61174 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#61175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61176 = CARTESIAN_POINT ( 'NONE', ( 1.621966450038314600E-013, 77.22261628933252100, -28.70555803802997700 ) ) ; +#61177 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61179 = AXIS2_PLACEMENT_3D ( 'NONE', #2519, #33555, #39807 ) ; +#61180 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818041300, 51.65075715145332700, -28.20555803803005900 ) ) ; +#61181 = CIRCLE ( 'NONE', #77060, 10.00000000000009400 ) ; +#61182 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#61183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61184 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61185 = EDGE_LOOP ( 'NONE', ( #30324, #41647, #30354, #10624, #4330 ) ) ; +#61186 = ORIENTED_EDGE ( 'NONE', *, *, #34656, .T. ) ; +#61187 = CARTESIAN_POINT ( 'NONE', ( 16.69248133767934700, 94.98496267535871600, -28.13297204219428900 ) ) ; +#61188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61189 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747118300, 9.968680884981161200, -28.51286550264485000 ) ) ; +#61190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75577, #63370, #75853, #38556 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.851335625380350200E-018, 0.001246264537621167000 ), + .UNSPECIFIED. ) ; +#61191 = ADVANCED_FACE ( 'NONE', ( #55456 ), #18478, .T. ) ; +#61192 = CONICAL_SURFACE ( 'NONE', #4002, 10.00000000000009200, 0.7853981633974447300 ) ; +#61193 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#61194 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489671700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#61195 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61196 = FACE_OUTER_BOUND ( 'NONE', #69523, .T. ) ; +#61197 = ORIENTED_EDGE ( 'NONE', *, *, #61824, .F. ) ; +#61198 = ORIENTED_EDGE ( 'NONE', *, *, #69055, .T. ) ; +#61199 = EDGE_CURVE ( 'NONE', #3423, #46310, #51523, .T. ) ; +#61200 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 31.83333333333333900, -3.349151577478984600 ) ) ; +#61201 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.16749699759768800, -28.20555803802997700 ) ) ; +#61202 = ORIENTED_EDGE ( 'NONE', *, *, #43543, .T. ) ; +#61203 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35731, #42215, #61036, #23767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001694669825366916700 ), + .UNSPECIFIED. ) ; +#61204 = FACE_OUTER_BOUND ( 'NONE', #45919, .T. ) ; +#61205 = EDGE_CURVE ( 'NONE', #49574, #13752, #6146, .T. ) ; +#61206 = VERTEX_POINT ( 'NONE', #25418 ) ; +#61207 = ORIENTED_EDGE ( 'NONE', *, *, #75933, .T. ) ; +#61208 = VERTEX_POINT ( 'NONE', #31658 ) ; +#61209 = VERTEX_POINT ( 'NONE', #20527 ) ; +#61210 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3652, #40931, #16191, #59714 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001179148174662981200 ), + .UNSPECIFIED. ) ; +#61211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61212 = ADVANCED_FACE ( 'NONE', ( #35055 ), #49563, .T. ) ; +#61214 = VERTEX_POINT ( 'NONE', #33026 ) ; +#61213 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61215 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61216 = CARTESIAN_POINT ( 'NONE', ( 5.667266028859931000, 57.14999999999815800, -8.266040901498334000 ) ) ; +#61217 = EDGE_CURVE ( 'NONE', #52661, #13600, #66182, .T. ) ; +#61218 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026315400, 14.04999999999926700, -28.70555803803042500 ) ) ; +#61219 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57247, #44958, #38987, #1736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914355333300E-007, 0.0008482521192576394300 ), + .UNSPECIFIED. ) ; +#61220 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155498100, 55.46616414991842000, -28.37247596307076200 ) ) ; +#61221 = ORIENTED_EDGE ( 'NONE', *, *, #62642, .F. ) ; +#61222 = FACE_OUTER_BOUND ( 'NONE', #53068, .T. ) ; +#61223 = ORIENTED_EDGE ( 'NONE', *, *, #21890, .T. ) ; +#61224 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61225 = EDGE_CURVE ( 'NONE', #43623, #64266, #72486, .T. ) ; +#61226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61228 = EDGE_CURVE ( 'NONE', #75777, #2565, #1904, .T. ) ; +#61227 = ORIENTED_EDGE ( 'NONE', *, *, #3480, .F. ) ; +#61229 = EDGE_LOOP ( 'NONE', ( #20710, #11658, #78720, #58760, #2967 ) ) ; +#61230 = ADVANCED_FACE ( 'NONE', ( #3858 ), #64244, .T. ) ; +#61231 = VERTEX_POINT ( 'NONE', #14791 ) ; +#61232 = ORIENTED_EDGE ( 'NONE', *, *, #78236, .F. ) ; +#61233 = CARTESIAN_POINT ( 'NONE', ( -4.035920356936727200, 20.59789380924897600, -28.25343951603328200 ) ) ; +#61234 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690293800, 75.79999999999950000, -28.70555803803030800 ) ) ; +#61235 = CIRCLE ( 'NONE', #68790, 10.50000000000009400 ) ; +#61236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61238 = AXIS2_PLACEMENT_3D ( 'NONE', #20605, #64145, #26861 ) ; +#61239 = EDGE_CURVE ( 'NONE', #55373, #12182, #58005, .T. ) ; +#61240 = EDGE_CURVE ( 'NONE', #47186, #49483, #43515, .T. ) ; +#61241 = EDGE_CURVE ( 'NONE', #77820, #14453, #5838, .T. ) ; +#61242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61243 = ORIENTED_EDGE ( 'NONE', *, *, #7558, .F. ) ; +#61244 = ADVANCED_FACE ( 'NONE', ( #80760 ), #14572, .F. ) ; +#61245 = AXIS2_PLACEMENT_3D ( 'NONE', #65175, #9080, #71399 ) ; +#61246 = CIRCLE ( 'NONE', #40046, 10.50000000000009600 ) ; +#61248 = VERTEX_POINT ( 'NONE', #77349 ) ; +#61247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61249 = ORIENTED_EDGE ( 'NONE', *, *, #76782, .F. ) ; +#61251 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72957, #22908, #41929, #4667 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698652492200E-007, 0.0008724363063899827000 ), + .UNSPECIFIED. ) ; +#61250 = CARTESIAN_POINT ( 'NONE', ( 16.78574144345554600, 80.07527064970038600, -28.39317435246186200 ) ) ; +#61252 = ORIENTED_EDGE ( 'NONE', *, *, #5695, .T. ) ; +#61253 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 0.3333333333333417500, 1.294441961969997200 ) ) ; +#61254 = AXIS2_PLACEMENT_3D ( 'NONE', #41896, #48133, #79190 ) ; +#61255 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15592, #40594, #46832, #9592 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885671222875600E-007, 0.0003940053330072586600 ), + .UNSPECIFIED. ) ; +#61256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61257 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 40.50000000000002100, 4.650848422521016300 ) ) ; +#61258 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 41.24660241562189400, -28.20555803802996700 ) ) ; +#61259 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61260 = CIRCLE ( 'NONE', #9252, 10.50000000000009600 ) ; +#61261 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150959600, 18.27966528189935500, -28.30868034705273200 ) ) ; +#61262 = PLANE ( 'NONE', #53947 ) ; +#61263 = FACE_OUTER_BOUND ( 'NONE', #60791, .T. ) ; +#61264 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 5.666666666666681200, -8.133761268305512700 ) ) ; +#61265 = ORIENTED_EDGE ( 'NONE', *, *, #4826, .F. ) ; +#61266 = ORIENTED_EDGE ( 'NONE', *, *, #20441, .T. ) ; +#61267 = AXIS2_PLACEMENT_3D ( 'NONE', #34209, #77448, #46677 ) ; +#61268 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 78.16545993132820100, -28.70555803802999500 ) ) ; +#61269 = ORIENTED_EDGE ( 'NONE', *, *, #14230, .T. ) ; +#61270 = EDGE_CURVE ( 'NONE', #62129, #25931, #47630, .T. ) ; +#61271 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 4.999999999999995600, -18.70555803803001300 ) ) ; +#61272 = CARTESIAN_POINT ( 'NONE', ( 17.36059854261461400, 18.16749699759719400, -28.25434854811530600 ) ) ; +#61273 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 62.31032580521099400, -28.59353418718932400 ) ) ; +#61274 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#61275 = FACE_OUTER_BOUND ( 'NONE', #67601, .T. ) ; +#61277 = VERTEX_POINT ( 'NONE', #2520 ) ; +#61276 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105667300, 45.54999999999998300, -28.70555803802996700 ) ) ; +#61278 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61279 = CIRCLE ( 'NONE', #43231, 10.00000000000009600 ) ; +#61280 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#61281 = VERTEX_POINT ( 'NONE', #65136 ) ; +#61282 = VERTEX_POINT ( 'NONE', #27873 ) ; +#61283 = CARTESIAN_POINT ( 'NONE', ( -16.22669991988171700, 50.48827478264048100, -28.63215901840168700 ) ) ; +#61284 = ORIENTED_EDGE ( 'NONE', *, *, #79027, .F. ) ; +#61285 = EDGE_CURVE ( 'NONE', #77818, #78686, #29138, .T. ) ; +#61286 = FACE_OUTER_BOUND ( 'NONE', #34561, .T. ) ; +#61287 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868446500, 39.51513784120218300, -28.32821106612155000 ) ) ; +#61288 = ORIENTED_EDGE ( 'NONE', *, *, #33079, .T. ) ; +#61289 = ORIENTED_EDGE ( 'NONE', *, *, #44250, .F. ) ; +#61290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61291 = AXIS2_PLACEMENT_3D ( 'NONE', #70547, #33289, #76804 ) ; +#61292 = VERTEX_POINT ( 'NONE', #46566 ) ; +#61293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61294 = EDGE_LOOP ( 'NONE', ( #51919, #59047, #37344 ) ) ; +#61295 = VERTEX_POINT ( 'NONE', #9323 ) ; +#61296 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.23237991241948900, -28.26633708900883900 ) ) ; +#61297 = ORIENTED_EDGE ( 'NONE', *, *, #71245, .F. ) ; +#61298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61299 = CARTESIAN_POINT ( 'NONE', ( 9.963744891818969100, 79.94924284854664600, -28.20555803803014100 ) ) ; +#61300 = ORIENTED_EDGE ( 'NONE', *, *, #77649, .T. ) ; +#61301 = CARTESIAN_POINT ( 'NONE', ( -10.62849472960806600, 61.43250300240229200, -28.25053119339279900 ) ) ; +#61302 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571400400, 41.52858243452107000, -28.70555803802997700 ) ) ; +#61303 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#61304 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466624000, 19.76893971291457000, -28.57333386111661300 ) ) ; +#61305 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61306 = CARTESIAN_POINT ( 'NONE', ( -10.12141251449997400, 81.76337688193832800, -28.37223523914912000 ) ) ; +#61307 = CONICAL_SURFACE ( 'NONE', #41180, 10.00000000000009200, 0.7853981633974447300 ) ; +#61308 = AXIS2_PLACEMENT_3D ( 'NONE', #37630, #385, #43874 ) ; +#61309 = ORIENTED_EDGE ( 'NONE', *, *, #49922, .F. ) ; +#61310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61311 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#61312 = EDGE_LOOP ( 'NONE', ( #18299, #53987, #53515, #3802, #9601, #67285, #51101 ) ) ; +#61313 = ORIENTED_EDGE ( 'NONE', *, *, #77546, .F. ) ; +#61314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61315 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.10252595950259300, -28.26641963845861800 ) ) ; +#61316 = CONICAL_SURFACE ( 'NONE', #43130, 10.00000000000009400, 0.7853981633974447300 ) ; +#61317 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61318 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#61319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61320 = ORIENTED_EDGE ( 'NONE', *, *, #76812, .T. ) ; +#61321 = AXIS2_PLACEMENT_3D ( 'NONE', #34421, #77930, #40654 ) ; +#61322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61323 = EDGE_LOOP ( 'NONE', ( #9568, #79831, #56138, #29471 ) ) ; +#61324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52910, #9400, #65477, #28224 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785901388800E-007, 0.0007677775503743551200 ), + .UNSPECIFIED. ) ; +#61325 = EDGE_CURVE ( 'NONE', #45798, #41614, #31139, .T. ) ; +#61326 = CIRCLE ( 'NONE', #40524, 10.00000000000009200 ) ; +#61327 = ORIENTED_EDGE ( 'NONE', *, *, #43798, .T. ) ; +#61328 = ADVANCED_FACE ( 'NONE', ( #16537 ), #29221, .F. ) ; +#61329 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61330 = ORIENTED_EDGE ( 'NONE', *, *, #48326, .F. ) ; +#61331 = ADVANCED_FACE ( 'NONE', ( #40869 ), #76846, .F. ) ; +#61332 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 46.50000000000001400, -7.061964498581016200 ) ) ; +#61333 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#61334 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56381, #12906, #75176, #37877 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213710116700E-007, 0.0008724366121412678800 ), + .UNSPECIFIED. ) ; +#61335 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61337 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925623200, 31.78032162676581900, -28.55467576046956400 ) ) ; +#61338 = ADVANCED_FACE ( 'NONE', ( #45667 ), #9609, .T. ) ; +#61339 = CARTESIAN_POINT ( 'NONE', ( -10.04027359854959100, 49.72437813624630800, -28.30310527599301900 ) ) ; +#61340 = EDGE_CURVE ( 'NONE', #39960, #9389, #57420, .T. ) ; +#61341 = FACE_OUTER_BOUND ( 'NONE', #18037, .T. ) ; +#61342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61343 = FACE_OUTER_BOUND ( 'NONE', #16757, .T. ) ; +#61344 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .T. ) ; +#61345 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61346 = AXIS2_PLACEMENT_3D ( 'NONE', #5137, #73416, #11411 ) ; +#61347 = EDGE_CURVE ( 'NONE', #51218, #56951, #14627, .T. ) ; +#61348 = EDGE_CURVE ( 'NONE', #13513, #65707, #12636, .T. ) ; +#61349 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61350 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30138, #67373, #36103, #73632 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932795554500 ), + .UNSPECIFIED. ) ; +#61351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61352 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851508900, 34.09761904761905500, -28.70555803802995200 ) ) ; +#61353 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571390300, 73.67681279774493000, -28.70555803803047500 ) ) ; +#61354 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 17.83333333333333200, 1.741883078712340300 ) ) ; +#61355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61356 = FACE_OUTER_BOUND ( 'NONE', #31917, .T. ) ; +#61358 = ORIENTED_EDGE ( 'NONE', *, *, #7452, .F. ) ; +#61357 = EDGE_CURVE ( 'NONE', #50920, #36192, #147, .T. ) ; +#61359 = ORIENTED_EDGE ( 'NONE', *, *, #76706, .T. ) ; +#61360 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372565200, 22.66464174796073300, -28.53896444442198500 ) ) ; +#61361 = ORIENTED_EDGE ( 'NONE', *, *, #27992, .F. ) ; +#61362 = FACE_OUTER_BOUND ( 'NONE', #52398, .T. ) ; +#61363 = ORIENTED_EDGE ( 'NONE', *, *, #29192, .T. ) ; +#61364 = ORIENTED_EDGE ( 'NONE', *, *, #56923, .F. ) ; +#61365 = ORIENTED_EDGE ( 'NONE', *, *, #58373, .F. ) ; +#61366 = ORIENTED_EDGE ( 'NONE', *, *, #71943, .T. ) ; +#61367 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.22294471194861400, -28.20555803802997700 ) ) ; +#61368 = ORIENTED_EDGE ( 'NONE', *, *, #16777, .T. ) ; +#61369 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#61370 = ORIENTED_EDGE ( 'NONE', *, *, #76765, .F. ) ; +#61371 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819378900, 81.65075715145303500, -28.20555803802997700 ) ) ; +#61372 = ORIENTED_EDGE ( 'NONE', *, *, #31304, .F. ) ; +#61373 = AXIS2_PLACEMENT_3D ( 'NONE', #50569, #13374, #56861 ) ; +#61374 = CARTESIAN_POINT ( 'NONE', ( -10.05712673146655300, 31.29130857014956400, -28.37223374938507800 ) ) ; +#61375 = AXIS2_PLACEMENT_3D ( 'NONE', #28450, #15888, #78182 ) ; +#61376 = EDGE_CURVE ( 'NONE', #19205, #25026, #33060, .T. ) ; +#61377 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 80.34267608797617300, -28.20555803803014400 ) ) ; +#61378 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 49.33333333333335700, -5.205558038030015500 ) ) ; +#61379 = ORIENTED_EDGE ( 'NONE', *, *, #71686, .F. ) ; +#61380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61381 = CONICAL_SURFACE ( 'NONE', #58342, 10.50000000000009600, 0.7853981633974482800 ) ; +#61382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61383 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 52.33333333333334300, 1.294441961969997200 ) ) ; +#61384 = ORIENTED_EDGE ( 'NONE', *, *, #5079, .F. ) ; +#61385 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61386 = ORIENTED_EDGE ( 'NONE', *, *, #6881, .F. ) ; +#61387 = ORIENTED_EDGE ( 'NONE', *, *, #50799, .F. ) ; +#61388 = ORIENTED_EDGE ( 'NONE', *, *, #30825, .T. ) ; +#61389 = EDGE_LOOP ( 'NONE', ( #24638, #40162, #44810 ) ) ; +#61390 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61391 = CARTESIAN_POINT ( 'NONE', ( -17.40093558791467000, 69.90728766135835300, -28.41359472476244000 ) ) ; +#61392 = FACE_OUTER_BOUND ( 'NONE', #15902, .T. ) ; +#61393 = EDGE_CURVE ( 'NONE', #79180, #51411, #78833, .T. ) ; +#61394 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572800, 12.17681279774500400, -28.70555803802994200 ) ) ; +#61395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61396 = ORIENTED_EDGE ( 'NONE', *, *, #27810, .T. ) ; +#61397 = AXIS2_PLACEMENT_3D ( 'NONE', #40348, #3078, #46576 ) ; +#61398 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#61399 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844502500, 55.80000000000000400, -28.20555803802997700 ) ) ; +#61400 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35120, #41073, #22848, #66380 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671443756500E-007, 0.0007670610367944312000 ), + .UNSPECIFIED. ) ; +#61401 = CARTESIAN_POINT ( 'NONE', ( 4.035907765261594400, 49.50212297965121900, -28.25344967589750300 ) ) ; +#61402 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534571100, 39.99920551340398600, -28.70555803802995200 ) ) ; +#61403 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#61404 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743308200, 36.93535825203924400, -28.53896444442198900 ) ) ; +#61405 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61406 = CONICAL_SURFACE ( 'NONE', #63435, 10.50000000000009400, 0.7853981633974500600 ) ; +#61407 = ORIENTED_EDGE ( 'NONE', *, *, #863, .F. ) ; +#61408 = CARTESIAN_POINT ( 'NONE', ( -3.942873268533301900, 41.79130857014966700, -28.37223374938523400 ) ) ; +#61409 = AXIS2_PLACEMENT_3D ( 'NONE', #61939, #55911, #31199 ) ; +#61410 = ORIENTED_EDGE ( 'NONE', *, *, #29790, .T. ) ; +#61411 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61412 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528153100, 9.968680884981223400, -28.51286550264508800 ) ) ; +#61413 = CARTESIAN_POINT ( 'NONE', ( 2.655202348769049300, 29.28860447109613200, -28.53900456328625500 ) ) ; +#61414 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999940500, 28.13176086632792000, -28.70555803802994200 ) ) ; +#61415 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61416 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466437400, 10.29130857014973400, -28.37223374938515600 ) ) ; +#61417 = ADVANCED_FACE ( 'NONE', ( #43721 ), #41797, .T. ) ; +#61418 = AXIS2_PLACEMENT_3D ( 'NONE', #50822, #13631, #57127 ) ; +#61419 = CIRCLE ( 'NONE', #55734, 10.00000000000009200 ) ; +#61420 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555630500, 59.72166103827314000, -28.53892303408242300 ) ) ; +#61421 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 58.66666666666667900, -10.73183747965883100 ) ) ; +#61422 = ORIENTED_EDGE ( 'NONE', *, *, #30253, .T. ) ; +#61423 = ORIENTED_EDGE ( 'NONE', *, *, #48328, .F. ) ; +#61424 = ORIENTED_EDGE ( 'NONE', *, *, #57733, .F. ) ; +#61425 = ADVANCED_FACE ( 'NONE', ( #62269 ), #8691, .F. ) ; +#61426 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 23.83333333333333900, 3.794441961969996900 ) ) ; +#61427 = AXIS2_PLACEMENT_3D ( 'NONE', #7075, #50574, #13379 ) ; +#61428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27891, #65145, #40351, #3080 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417466029714900E-007, 0.0004435563144346536700 ), + .UNSPECIFIED. ) ; +#61429 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61430 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661480000, 31.10677350908856900, -28.30799595738881900 ) ) ; +#61431 = FACE_OUTER_BOUND ( 'NONE', #23250, .T. ) ; +#61432 = EDGE_LOOP ( 'NONE', ( #44201, #21453, #19407 ) ) ; +#61433 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61434 = ORIENTED_EDGE ( 'NONE', *, *, #48328, .T. ) ; +#61435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61437 = CIRCLE ( 'NONE', #70383, 10.00000000000009600 ) ; +#61438 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 26.16666666666667900, -12.20555803803000000 ) ) ; +#61439 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24949, #43423, #31221, #74727 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099548350528500E-007, 0.0008759529789573851500 ), + .UNSPECIFIED. ) ; +#61440 = ORIENTED_EDGE ( 'NONE', *, *, #56693, .T. ) ; +#61441 = ORIENTED_EDGE ( 'NONE', *, *, #40673, .F. ) ; +#61442 = VERTEX_POINT ( 'NONE', #29242 ) ; +#61443 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 60.16054007504464400, -28.34042301926881200 ) ) ; +#61444 = PLANE ( 'NONE', #54811 ) ; +#61445 = EDGE_LOOP ( 'NONE', ( #55151, #12710, #57204, #4348 ) ) ; +#61446 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432843700, 18.35339758437810400, -28.20555803802992800 ) ) ; +#61447 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61448 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61449 = ADVANCED_FACE ( 'NONE', ( #58356 ), #56384, .F. ) ; +#61450 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#61451 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61452 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 35.05000000000000400, -28.20555803802995200 ) ) ; +#61453 = ORIENTED_EDGE ( 'NONE', *, *, #2627, .F. ) ; +#61454 = CIRCLE ( 'NONE', #36406, 10.00000000000009600 ) ; +#61455 = ORIENTED_EDGE ( 'NONE', *, *, #62553, .T. ) ; +#61456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61457 = ORIENTED_EDGE ( 'NONE', *, *, #23344, .F. ) ; +#61458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61459 = EDGE_CURVE ( 'NONE', #78358, #40146, #74906, .T. ) ; +#61460 = ORIENTED_EDGE ( 'NONE', *, *, #53794, .T. ) ; +#61461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61462 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654557500, 51.32559822014179900, -28.29986836858018500 ) ) ; +#61463 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#61464 = ORIENTED_EDGE ( 'NONE', *, *, #13435, .F. ) ; +#61465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61466 = CYLINDRICAL_SURFACE ( 'NONE', #5014, 10.00000000000000200 ) ; +#61467 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#61468 = EDGE_CURVE ( 'NONE', #9664, #29021, #25282, .T. ) ; +#61469 = ORIENTED_EDGE ( 'NONE', *, *, #25202, .T. ) ; +#61470 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 77.70389005397395000, -28.37519436813183300 ) ) ; +#61471 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 80.16749699759769500, -28.20555803802997700 ) ) ; +#61472 = EDGE_CURVE ( 'NONE', #24201, #36658, #10676, .T. ) ; +#61473 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925628600, 27.81967837323414400, -28.55467576046955700 ) ) ; +#61474 = AXIS2_PLACEMENT_3D ( 'NONE', #47216, #9996, #53509 ) ; +#61475 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 29.66666666666667500, 2.794441961969992100 ) ) ; +#61476 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#61477 = FACE_OUTER_BOUND ( 'NONE', #54720, .T. ) ; +#61478 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 47.42318720225497200, -28.70555803802996700 ) ) ; +#61479 = ORIENTED_EDGE ( 'NONE', *, *, #44356, .F. ) ; +#61480 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61481 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 60.52242369685793500, -28.53861367218592800 ) ) ; +#61482 = CARTESIAN_POINT ( 'NONE', ( 7.936780899983814300, 57.15000000000002000, -3.301856158520099200 ) ) ; +#61483 = EDGE_CURVE ( 'NONE', #73733, #28695, #72963, .T. ) ; +#61484 = EDGE_CURVE ( 'NONE', #74584, #71304, #66488, .T. ) ; +#61485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76530, #70275, #2005, #45489 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401240900, 0.004682530427071011200 ), + .UNSPECIFIED. ) ; +#61486 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61487 = EDGE_CURVE ( 'NONE', #50416, #35143, #27238, .T. ) ; +#61488 = AXIS2_PLACEMENT_3D ( 'NONE', #63318, #50746, #57045 ) ; +#61489 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 80.79999999999999700, -28.55171188418376700 ) ) ; +#61490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61491 = CARTESIAN_POINT ( 'NONE', ( -4.186539978270701600, 6.877501000800540600, -28.20555803802993100 ) ) ; +#61492 = AXIS2_PLACEMENT_3D ( 'NONE', #65508, #28261, #71752 ) ; +#61493 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825238600, 61.43945992495532900, -28.34042301926881200 ) ) ; +#61494 = ORIENTED_EDGE ( 'NONE', *, *, #24522, .T. ) ; +#61495 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000000, 49.13176086632793700, -28.70555803802996700 ) ) ; +#61496 = ORIENTED_EDGE ( 'NONE', *, *, #20514, .T. ) ; +#61497 = AXIS2_PLACEMENT_3D ( 'NONE', #4795, #11079, #17067 ) ; +#61498 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 82.97376207875059600, -28.70555803802997700 ) ) ; +#61499 = ORIENTED_EDGE ( 'NONE', *, *, #39014, .T. ) ; +#61500 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743564700, 57.93535825203924400, -28.53896444442202800 ) ) ; +#61501 = EDGE_CURVE ( 'NONE', #75366, #42900, #51962, .T. ) ; +#61502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61503 = AXIS2_PLACEMENT_3D ( 'NONE', #56950, #19696, #63218 ) ; +#61504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61505 = ADVANCED_FACE ( 'NONE', ( #23316 ), #21379, .T. ) ; +#61506 = CIRCLE ( 'NONE', #78388, 9.500000000000097700 ) ; +#61507 = ORIENTED_EDGE ( 'NONE', *, *, #9215, .F. ) ; +#61508 = ORIENTED_EDGE ( 'NONE', *, *, #77668, .F. ) ; +#61509 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#61510 = ORIENTED_EDGE ( 'NONE', *, *, #16409, .T. ) ; +#61511 = FACE_OUTER_BOUND ( 'NONE', #28885, .T. ) ; +#61512 = ORIENTED_EDGE ( 'NONE', *, *, #30961, .F. ) ; +#61513 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #43517, #6273 ) ; +#61514 = ORIENTED_EDGE ( 'NONE', *, *, #68103, .T. ) ; +#61515 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#61516 = EDGE_LOOP ( 'NONE', ( #73464, #10458, #67057, #78455 ) ) ; +#61517 = ADVANCED_FACE ( 'NONE', ( #39850 ), #60339, .T. ) ; +#61518 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, -1.833333333333333000, -2.545304000185620600 ) ) ; +#61519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39502, #76768, #58279, #21037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002333577134203749500 ), + .UNSPECIFIED. ) ; +#61520 = CIRCLE ( 'NONE', #3553, 9.500000000000097700 ) ; +#61521 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61522 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 38.33333333333334300, -5.205558038030008400 ) ) ; +#61523 = AXIS2_PLACEMENT_3D ( 'NONE', #56602, #19344, #62881 ) ; +#61524 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61525 = CONICAL_SURFACE ( 'NONE', #80151, 10.00000000000009200, 0.7853981633974447300 ) ; +#61526 = ORIENTED_EDGE ( 'NONE', *, *, #3593, .T. ) ; +#61527 = ADVANCED_FACE ( 'NONE', ( #54442 ), #35959, .T. ) ; +#61528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61529 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 10.11077422949656500, -28.37255355648630600 ) ) ; +#61530 = ORIENTED_EDGE ( 'NONE', *, *, #69193, .T. ) ; +#61531 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 3.500000000000008900, 4.650848422521016300 ) ) ; +#61532 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63038, #50743, #26050, #69537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760837039500, 0.0007596411030282642200 ), + .UNSPECIFIED. ) ; +#61533 = ORIENTED_EDGE ( 'NONE', *, *, #21411, .F. ) ; +#61534 = ORIENTED_EDGE ( 'NONE', *, *, #3437, .T. ) ; +#61535 = CONICAL_SURFACE ( 'NONE', #3832, 10.50000000000009600, 0.7853981633974500600 ) ; +#61536 = EDGE_LOOP ( 'NONE', ( #16816, #56936, #3466, #8248, #41506, #34995, #13275 ) ) ; +#61537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61538 = CIRCLE ( 'NONE', #1311, 10.00000000000009400 ) ; +#61539 = AXIS2_PLACEMENT_3D ( 'NONE', #23656, #67163, #29944 ) ; +#61540 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999899600, 90.79999999999991200, -28.70555803802997700 ) ) ; +#61541 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#61542 = ADVANCED_FACE ( 'NONE', ( #37880 ), #2840, .T. ) ; +#61543 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009100, 15.94142842854307000, -28.20555803802992800 ) ) ; +#61544 = EDGE_CURVE ( 'NONE', #66582, #8772, #19404, .T. ) ; +#61545 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61546 = AXIS2_PLACEMENT_3D ( 'NONE', #61008, #35975, #73504 ) ; +#61547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61548 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 79.77559325427188200, -28.45987523529578700 ) ) ; +#61549 = CONICAL_SURFACE ( 'NONE', #26848, 10.50000000000009600, 0.7853981633974500600 ) ; +#61550 = ORIENTED_EDGE ( 'NONE', *, *, #12114, .F. ) ; +#61551 = VERTEX_POINT ( 'NONE', #17760 ) ; +#61552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61553 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527472700, 45.54999999999998300, -28.20555803802996700 ) ) ; +#61554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61555 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811647600, 49.70564881207762700, -28.41114655922299900 ) ) ; +#61556 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044500, 79.08026449164336200, -28.70555803802997700 ) ) ; +#61557 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#61558 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#61559 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59203, #9708, #15961, #59495 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210960700, 0.001517199873936111100 ), + .UNSPECIFIED. ) ; +#61560 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61561 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188002100, 41.06914835874665900, -28.45573375118225800 ) ) ; +#61562 = EDGE_CURVE ( 'NONE', #24220, #2505, #4803, .T. ) ; +#61563 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 81.65075715145309200, -28.20555803802997400 ) ) ; +#61564 = EDGE_CURVE ( 'NONE', #55826, #22393, #52469, .T. ) ; +#61565 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462811600, 60.34267608797633600, -28.20555803803030800 ) ) ; +#61566 = ORIENTED_EDGE ( 'NONE', *, *, #70975, .F. ) ; +#61567 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252816500, 49.63131911501876200, -28.51286550264511300 ) ) ; +#61568 = ORIENTED_EDGE ( 'NONE', *, *, #37221, .F. ) ; +#61569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61570 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.03751622186521800, -28.32723995587616600 ) ) ; +#61571 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543700, 90.27440177985818100, -28.29986836858018200 ) ) ; +#61572 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61573 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034431400, 49.42298334620755200, -28.20555803802997400 ) ) ; +#61574 = EDGE_CURVE ( 'NONE', #47370, #26321, #37525, .T. ) ; +#61575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61576 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34746, #40988, #47202, #9975 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249095000, 0.0008027336008645225500 ), + .UNSPECIFIED. ) ; +#61577 = EDGE_CURVE ( 'NONE', #58067, #56903, #23117, .T. ) ; +#61578 = CIRCLE ( 'NONE', #62170, 10.00000000000009200 ) ; +#61579 = ORIENTED_EDGE ( 'NONE', *, *, #15564, .T. ) ; +#61580 = AXIS2_PLACEMENT_3D ( 'NONE', #11462, #54951, #17707 ) ; +#61581 = FACE_OUTER_BOUND ( 'NONE', #28460, .T. ) ; +#61582 = ORIENTED_EDGE ( 'NONE', *, *, #55102, .T. ) ; +#61583 = CONICAL_SURFACE ( 'NONE', #50148, 10.00000000000009400, 0.7853981633974447300 ) ; +#61584 = CARTESIAN_POINT ( 'NONE', ( -1.786765180256111300E-013, 64.37738371066707500, -28.70555803802997700 ) ) ; +#61585 = ORIENTED_EDGE ( 'NONE', *, *, #42227, .F. ) ; +#61586 = ORIENTED_EDGE ( 'NONE', *, *, #54512, .F. ) ; +#61587 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 44.33333333333334300, 5.722645192245503900 ) ) ; +#61588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61589 = AXIS2_PLACEMENT_3D ( 'NONE', #12846, #56328, #19071 ) ; +#61590 = CONICAL_SURFACE ( 'NONE', #72346, 10.00000000000009200, 0.7853981633974447300 ) ; +#61591 = EDGE_CURVE ( 'NONE', #23348, #43121, #8606, .T. ) ; +#61592 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658265600, 41.44848545219034000, -28.67627428870436600 ) ) ; +#61593 = EDGE_CURVE ( 'NONE', #45954, #34956, #74960, .T. ) ; +#61594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61595 = EDGE_CURVE ( 'NONE', #13531, #35221, #60516, .T. ) ; +#61596 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#61597 = ADVANCED_FACE ( 'NONE', ( #70996 ), #889, .T. ) ; +#61598 = ORIENTED_EDGE ( 'NONE', *, *, #13915, .T. ) ; +#61599 = CONICAL_SURFACE ( 'NONE', #68113, 10.00000000000009200, 0.7853981633974447300 ) ; +#61600 = AXIS2_PLACEMENT_3D ( 'NONE', #21018, #64544, #27277 ) ; +#61601 = ORIENTED_EDGE ( 'NONE', *, *, #24474, .F. ) ; +#61602 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844493900, 85.79999999999985500, -28.20555803803014400 ) ) ; +#61603 = ORIENTED_EDGE ( 'NONE', *, *, #80143, .T. ) ; +#61604 = EDGE_LOOP ( 'NONE', ( #21717, #63120, #61120, #17470 ) ) ; +#61605 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2381, #52145, #21195, #64725 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.002676326193402686400 ), + .UNSPECIFIED. ) ; +#61606 = FACE_OUTER_BOUND ( 'NONE', #29525, .T. ) ; +#61607 = ORIENTED_EDGE ( 'NONE', *, *, #50788, .F. ) ; +#61608 = EDGE_CURVE ( 'NONE', #40742, #66402, #34006, .T. ) ; +#61609 = CONICAL_SURFACE ( 'NONE', #3339, 10.00000000000009200, 0.7853981633974447300 ) ; +#61610 = ADVANCED_FACE ( 'NONE', ( #69045 ), #32058, .T. ) ; +#61611 = AXIS2_PLACEMENT_3D ( 'NONE', #15649, #59147, #21904 ) ; +#61612 = AXIS2_PLACEMENT_3D ( 'NONE', #46415, #9163, #52692 ) ; +#61613 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844493900, 85.79999999999998300, -28.20555803802997700 ) ) ; +#61614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61616 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385199400, 10.10677350908857600, -28.30799595738879400 ) ) ; +#61617 = CARTESIAN_POINT ( 'NONE', ( -16.52200773130723400, 41.47693523592568000, -28.54785533207245200 ) ) ; +#61618 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 15.66666666666667100, -6.705558038030000400 ) ) ; +#61619 = ORIENTED_EDGE ( 'NONE', *, *, #11217, .F. ) ; +#61620 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 57.14999999999999900, 0.0000000000000000000 ) ) ; +#61621 = ORIENTED_EDGE ( 'NONE', *, *, #18688, .T. ) ; +#61622 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#61623 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#61624 = CIRCLE ( 'NONE', #39825, 10.00000000000009600 ) ; +#61625 = ORIENTED_EDGE ( 'NONE', *, *, #21917, .F. ) ; +#61626 = ADVANCED_FACE ( 'NONE', ( #50508 ), #79748, .F. ) ; +#61627 = FACE_OUTER_BOUND ( 'NONE', #39224, .T. ) ; +#61628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61629 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471413000, 9.968680884981180800, -28.51286550264493200 ) ) ; +#61630 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 72.97376207875058200, -28.70555803802997700 ) ) ; +#61631 = CARTESIAN_POINT ( 'NONE', ( -3.628581783286367400, 90.16749699759768100, -28.25056166218020700 ) ) ; +#61632 = AXIS2_PLACEMENT_3D ( 'NONE', #45768, #8523, #52027 ) ; +#61633 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432712300, 18.35339758437789800, -28.20555803803009500 ) ) ; +#61634 = ADVANCED_FACE ( 'NONE', ( #65178 ), #56331, .T. ) ; +#61635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#61636 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 47.16666666666667900, 0.9380355014189848400 ) ) ; +#61637 = AXIS2_PLACEMENT_3D ( 'NONE', #38263, #1018, #44500 ) ; +#61638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61639 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 50.16666666666666400, -2.545304000185620600 ) ) ; +#61640 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944359200, 31.29955846777004400, -28.38339015421975700 ) ) ; +#61641 = EDGE_CURVE ( 'NONE', #59182, #11747, #17468, .T. ) ; +#61642 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 22.67681279774500100, -28.70555803802995200 ) ) ; +#61643 = AXIS2_PLACEMENT_3D ( 'NONE', #64393, #76580, #39592 ) ; +#61644 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 23.13556610137281300, -28.54207364681941100 ) ) ; +#61645 = EDGE_LOOP ( 'NONE', ( #52949, #70113, #50058, #52104 ) ) ; +#61646 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174630400, 70.16054007504466500, -28.34042301926885100 ) ) ; +#61647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61648 = CARTESIAN_POINT ( 'NONE', ( -15.85159581709225100, 31.16410593582544000, -28.68054222049886400 ) ) ; +#61649 = AXIS2_PLACEMENT_3D ( 'NONE', #29230, #41668, #4417 ) ; +#61650 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856430500, 30.04666532841558900, -28.65803483468292600 ) ) ; +#61651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61653 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198448400, 80.69966441803887800, -28.70555803803014400 ) ) ; +#61654 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29364, #41811, #4560, #48046 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207967061300E-007, 0.0008724366121409710300 ), + .UNSPECIFIED. ) ; +#61655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61656 = CARTESIAN_POINT ( 'NONE', ( -6.100334448160478700, 70.79999999999998300, -28.20555803802988100 ) ) ; +#61657 = CONICAL_SURFACE ( 'NONE', #4248, 10.00000000000009200, 0.7853981633974447300 ) ; +#61658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61659 = VERTEX_POINT ( 'NONE', #37826 ) ; +#61660 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61661 = FACE_OUTER_BOUND ( 'NONE', #8832, .T. ) ; +#61662 = AXIS2_PLACEMENT_3D ( 'NONE', #54649, #79668, #67167 ) ; +#61663 = ORIENTED_EDGE ( 'NONE', *, *, #37159, .T. ) ; +#61664 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274333400, 43.66464174796073600, -28.53896444442201400 ) ) ; +#61665 = ORIENTED_EDGE ( 'NONE', *, *, #14745, .T. ) ; +#61666 = FACE_OUTER_BOUND ( 'NONE', #72383, .T. ) ; +#61667 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61669 = ORIENTED_EDGE ( 'NONE', *, *, #43170, .T. ) ; +#61668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61670 = ORIENTED_EDGE ( 'NONE', *, *, #46141, .T. ) ; +#61671 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61673 = ORIENTED_EDGE ( 'NONE', *, *, #75121, .T. ) ; +#61674 = CARTESIAN_POINT ( 'NONE', ( -16.10512553856427000, 19.05333467158443400, -28.65803483468293000 ) ) ; +#61675 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#61676 = CONICAL_SURFACE ( 'NONE', #51896, 10.00000000000009400, 0.7853981633974447300 ) ; +#61677 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 60.34267608797601700, -28.20555803802997700 ) ) ; +#61678 = CONICAL_SURFACE ( 'NONE', #45077, 10.50000000000009600, 0.7853981633974500600 ) ; +#61679 = VERTEX_POINT ( 'NONE', #13120 ) ; +#61680 = CIRCLE ( 'NONE', #72781, 10.00000000000009400 ) ; +#61681 = EDGE_CURVE ( 'NONE', #11747, #69301, #45994, .T. ) ; +#61682 = ORIENTED_EDGE ( 'NONE', *, *, #821, .T. ) ; +#61683 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 56.50000000000002800, 6.847000845227646500 ) ) ; +#61685 = EDGE_CURVE ( 'NONE', #49034, #7032, #31579, .T. ) ; +#61684 = ORIENTED_EDGE ( 'NONE', *, *, #35929, .F. ) ; +#61686 = EDGE_LOOP ( 'NONE', ( #11627, #65350, #10501 ) ) ; +#61687 = ORIENTED_EDGE ( 'NONE', *, *, #1699, .T. ) ; +#61688 = FACE_OUTER_BOUND ( 'NONE', #49809, .T. ) ; +#61689 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 21.66666666666667900, -5.535685056952199400 ) ) ; +#61690 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#61691 = EDGE_CURVE ( 'NONE', #69272, #50912, #48567, .T. ) ; +#61692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61694 = EDGE_LOOP ( 'NONE', ( #19439, #64188, #44384, #24426 ) ) ; +#61695 = EDGE_LOOP ( 'NONE', ( #18666, #70907, #53331, #52953 ) ) ; +#61696 = PLANE ( 'NONE', #58649 ) ; +#61697 = EDGE_CURVE ( 'NONE', #10423, #44285, #17120, .T. ) ; +#61698 = EDGE_CURVE ( 'NONE', #53696, #62090, #2616, .T. ) ; +#61699 = ORIENTED_EDGE ( 'NONE', *, *, #19861, .T. ) ; +#61700 = FACE_OUTER_BOUND ( 'NONE', #67029, .T. ) ; +#61701 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 24.00000000000000700, 9.794441961969996100 ) ) ; +#61702 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#61703 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50008, #56022, #49738, #12807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082201152900E-007, 0.001119323292485721600 ), + .UNSPECIFIED. ) ; +#61704 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900884300, 31.03732497909458100, -28.41043597897467200 ) ) ; +#61705 = CARTESIAN_POINT ( 'NONE', ( 17.37141821671398700, 80.16749699759718300, -28.25056166218057600 ) ) ; +#61706 = AXIS2_PLACEMENT_3D ( 'NONE', #48983, #11776, #55266 ) ; +#61707 = EDGE_CURVE ( 'NONE', #32692, #54616, #67106, .T. ) ; +#61708 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997500, 90.03751622186537400, -28.32723995587606000 ) ) ; +#61709 = EDGE_CURVE ( 'NONE', #20694, #10538, #68959, .T. ) ; +#61710 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 96.59999999999999400, 16.29444196196997700 ) ) ; +#61711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61712 = EDGE_CURVE ( 'NONE', #12957, #9750, #63213, .T. ) ; +#61713 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#61714 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194906300, 66.76150692817331800, -28.68631150211663400 ) ) ; +#61715 = AXIS2_PLACEMENT_3D ( 'NONE', #27610, #15078, #33849 ) ; +#61716 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949247500, 38.57379779496241000, -28.70555803802995200 ) ) ; +#61717 = CYLINDRICAL_SURFACE ( 'NONE', #18514, 10.00000000000000200 ) ; +#61718 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#61719 = ADVANCED_FACE ( 'NONE', ( #15517 ), #44633, .F. ) ; +#61720 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 60.16054007504464400, -28.34042301926880500 ) ) ; +#61721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61722 = CARTESIAN_POINT ( 'NONE', ( 17.40093558791436500, 71.69271233864081700, -28.41359472476251500 ) ) ; +#61724 = VERTEX_POINT ( 'NONE', #26440 ) ; +#61723 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.43250300240228500, -28.20555803802997700 ) ) ; +#61725 = ADVANCED_FACE ( 'NONE', ( #6760 ), #11624, .F. ) ; +#61726 = AXIS2_PLACEMENT_3D ( 'NONE', #61782, #49215, #30770 ) ; +#61727 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551000, 55.79999999999999000, -28.20555803802997700 ) ) ; +#61728 = AXIS2_PLACEMENT_3D ( 'NONE', #58350, #21117, #64637 ) ; +#61729 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534587600, 18.99920551340398900, -28.70555803802992800 ) ) ; +#61730 = AXIS2_PLACEMENT_3D ( 'NONE', #57900, #20646, #64187 ) ; +#61731 = ORIENTED_EDGE ( 'NONE', *, *, #34687, .F. ) ; +#61732 = ADVANCED_FACE ( 'NONE', ( #77788 ), #7891, .T. ) ; +#61733 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, -49.81214711292819400, 0.0000000000000000000 ) ) ; +#61734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61736 = FACE_OUTER_BOUND ( 'NONE', #74382, .T. ) ; +#61737 = EDGE_LOOP ( 'NONE', ( #22098, #350, #7439, #49987 ) ) ; +#61738 = CIRCLE ( 'NONE', #76840, 10.50000000000009600 ) ; +#61739 = VERTEX_POINT ( 'NONE', #20429 ) ; +#61740 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 27.50000000000000400, -7.061964498581016200 ) ) ; +#61741 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484826200, 90.22161678501176100, -28.29547179040456600 ) ) ; +#61742 = CIRCLE ( 'NONE', #42785, 9.500000000000099500 ) ; +#61743 = FACE_OUTER_BOUND ( 'NONE', #59854, .T. ) ; +#61744 = ORIENTED_EDGE ( 'NONE', *, *, #32951, .T. ) ; +#61745 = ORIENTED_EDGE ( 'NONE', *, *, #28026, .F. ) ; +#61746 = ORIENTED_EDGE ( 'NONE', *, *, #28684, .F. ) ; +#61747 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432837500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#61748 = AXIS2_PLACEMENT_3D ( 'NONE', #30545, #43010, #5766 ) ; +#61749 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708540700, 85.80000000000167400, -28.63843632546335300 ) ) ; +#61750 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#61751 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466628200, 29.33106028708539300, -28.57333386111660200 ) ) ; +#61752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61753 = CONICAL_SURFACE ( 'NONE', #53949, 10.50000000000009600, 0.7853981633974500600 ) ; +#61754 = ORIENTED_EDGE ( 'NONE', *, *, #20007, .F. ) ; +#61755 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283200, 41.24660241562181500, -28.20555803802996700 ) ) ; +#61756 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61757 = FACE_OUTER_BOUND ( 'NONE', #58295, .T. ) ; +#61758 = ORIENTED_EDGE ( 'NONE', *, *, #9949, .T. ) ; +#61760 = EDGE_CURVE ( 'NONE', #5753, #40041, #54503, .T. ) ; +#61759 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64231, #57940, #33186, #76693 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099552960713900E-007, 0.0008759529789578664200 ), + .UNSPECIFIED. ) ; +#61761 = EDGE_LOOP ( 'NONE', ( #70872, #38535, #5046, #28248 ) ) ; +#61762 = ORIENTED_EDGE ( 'NONE', *, *, #66217, .F. ) ; +#61763 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61764 = AXIS2_PLACEMENT_3D ( 'NONE', #61480, #67709, #30214 ) ; +#61765 = VERTEX_POINT ( 'NONE', #70180 ) ; +#61766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61767 = ORIENTED_EDGE ( 'NONE', *, *, #57474, .T. ) ; +#61768 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55109, #11085, #24131, #67635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397376897500E-007, 0.0003301092607755730400 ), + .UNSPECIFIED. ) ; +#61769 = CONICAL_SURFACE ( 'NONE', #25162, 10.00000000000009400, 0.7853981633974447300 ) ; +#61770 = CARTESIAN_POINT ( 'NONE', ( 16.99797127827574900, 30.81091476818473000, -28.25432823872346000 ) ) ; +#61771 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 9.746602415621723000, -28.20555803803009500 ) ) ; +#61772 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56778, #13292, #75542, #38251 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668727679600E-007, 0.0007987728781047483100 ), + .UNSPECIFIED. ) ; +#61773 = ORIENTED_EDGE ( 'NONE', *, *, #17969, .F. ) ; +#61774 = AXIS2_PLACEMENT_3D ( 'NONE', #18356, #18618, #49579 ) ; +#61775 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965800, 41.44069092601378700, -28.35186440610859300 ) ) ; +#61776 = VERTEX_POINT ( 'NONE', #39160 ) ; +#61777 = FACE_OUTER_BOUND ( 'NONE', #63763, .T. ) ; +#61778 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61779 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, -3.999999999999985300, -1.205558038030002800 ) ) ; +#61780 = AXIS2_PLACEMENT_3D ( 'NONE', #5475, #36457, #11742 ) ; +#61781 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62585, #19057, #75101, #37799 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632938723500E-007, 0.0008082706238600363700 ), + .UNSPECIFIED. ) ; +#61782 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61783 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#61784 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 36.16666666666668600, 0.9380355014189834000 ) ) ; +#61785 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61786 = EDGE_CURVE ( 'NONE', #79210, #68291, #40038, .T. ) ; +#61787 = CIRCLE ( 'NONE', #27805, 9.500000000000097700 ) ; +#61788 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#61789 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 10.28933626866496100, -28.53923937255168400 ) ) ; +#61790 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 1.333333333333339300, -5.205558038030008400 ) ) ; +#61791 = ORIENTED_EDGE ( 'NONE', *, *, #21662, .F. ) ; +#61792 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972574700, 89.37488905616140800, -28.55192314908432400 ) ) ; +#61793 = ORIENTED_EDGE ( 'NONE', *, *, #7903, .F. ) ; +#61794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67560, #24056, #30336, #73819 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.955259894952262400E-007, 3.750963391305327800E-005 ), + .UNSPECIFIED. ) ; +#61795 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61796 = CARTESIAN_POINT ( 'NONE', ( -10.77874659791490300, 28.66476742015635900, -28.30311934730016100 ) ) ; +#61797 = ORIENTED_EDGE ( 'NONE', *, *, #31438, .F. ) ; +#61798 = ADVANCED_FACE ( 'NONE', ( #28194 ), #26700, .T. ) ; +#61799 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609139900, 70.13716795162604000, -28.48697406221692700 ) ) ; +#61800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61802 = CONICAL_SURFACE ( 'NONE', #26091, 10.00000000000009200, 0.7853981633974447300 ) ; +#61803 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61804 = CONICAL_SURFACE ( 'NONE', #73182, 10.50000000000009600, 0.7853981633974518300 ) ; +#61805 = EDGE_CURVE ( 'NONE', #67634, #21527, #46607, .T. ) ; +#61806 = ORIENTED_EDGE ( 'NONE', *, *, #20479, .F. ) ; +#61807 = EDGE_CURVE ( 'NONE', #30876, #52338, #13586, .T. ) ; +#61808 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61809 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61810 = ORIENTED_EDGE ( 'NONE', *, *, #25607, .T. ) ; +#61811 = FACE_OUTER_BOUND ( 'NONE', #32301, .T. ) ; +#61812 = CARTESIAN_POINT ( 'NONE', ( -12.10011726479566700, 24.55000000000000100, -28.53808257741932100 ) ) ; +#61813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61814 = VECTOR ( 'NONE', #67899, 1000.000000000000000 ) ; +#61815 = CARTESIAN_POINT ( 'NONE', ( -17.14620600645635700, 79.08128969594172000, -28.47270666107740700 ) ) ; +#61816 = VERTEX_POINT ( 'NONE', #76707 ) ; +#61817 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61818 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#61820 = EDGE_LOOP ( 'NONE', ( #46955, #1172, #38823, #26289 ) ) ; +#61819 = CARTESIAN_POINT ( 'NONE', ( 2.107689023311820600E-013, 67.94142842854276400, -28.20555803802997700 ) ) ; +#61821 = ADVANCED_FACE ( 'NONE', ( #30144 ), #73914, .T. ) ; +#61822 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707777200, 59.93589406416700200, -28.68054222049973800 ) ) ; +#61823 = AXIS2_PLACEMENT_3D ( 'NONE', #34373, #40607, #71640 ) ; +#61824 = EDGE_CURVE ( 'NONE', #73336, #47284, #25602, .T. ) ; +#61825 = CARTESIAN_POINT ( 'NONE', ( -3.985751803131264600, 80.01994747561620600, -28.24986299608849500 ) ) ; +#61826 = EDGE_CURVE ( 'NONE', #60268, #67588, #9653, .T. ) ; +#61827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61828 = EDGE_CURVE ( 'NONE', #62561, #63652, #26228, .T. ) ; +#61829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61830 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217475100, 61.43945992495532900, -28.34042301926881200 ) ) ; +#61831 = CIRCLE ( 'NONE', #11202, 10.50000000000009900 ) ; +#61832 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 71.99560977511660600, -28.70555803802997700 ) ) ; +#61833 = EDGE_CURVE ( 'NONE', #61442, #44569, #11135, .T. ) ; +#61834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61835 = ORIENTED_EDGE ( 'NONE', *, *, #34398, .T. ) ; +#61836 = FACE_OUTER_BOUND ( 'NONE', #52499, .T. ) ; +#61837 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#61838 = ORIENTED_EDGE ( 'NONE', *, *, #31525, .F. ) ; +#61839 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 90.34267608797600200, -28.20555803802997700 ) ) ; +#61840 = ORIENTED_EDGE ( 'NONE', *, *, #28308, .F. ) ; +#61841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61842 = ORIENTED_EDGE ( 'NONE', *, *, #43259, .F. ) ; +#61843 = ORIENTED_EDGE ( 'NONE', *, *, #66789, .T. ) ; +#61844 = EDGE_LOOP ( 'NONE', ( #75970, #73991, #13808 ) ) ; +#61845 = CYLINDRICAL_SURFACE ( 'NONE', #4770, 10.00000000000000200 ) ; +#61846 = AXIS2_PLACEMENT_3D ( 'NONE', #3151, #71444, #27962 ) ; +#61847 = CARTESIAN_POINT ( 'NONE', ( 10.12141251450012500, 71.76337688193764600, -28.37223523914919800 ) ) ; +#61848 = EDGE_LOOP ( 'NONE', ( #19195, #21938, #38380, #19812 ) ) ; +#61849 = AXIS2_PLACEMENT_3D ( 'NONE', #32524, #76035, #38739 ) ; +#61850 = ORIENTED_EDGE ( 'NONE', *, *, #59543, .F. ) ; +#61851 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725307500, 45.55000000000000400, -28.20555803802996700 ) ) ; +#61852 = ADVANCED_FACE ( 'NONE', ( #75827 ), #7666, .F. ) ; +#61853 = EDGE_LOOP ( 'NONE', ( #27446, #79676, #60635 ) ) ; +#61854 = CIRCLE ( 'NONE', #78527, 9.500000000000129700 ) ; +#61855 = VERTEX_POINT ( 'NONE', #46468 ) ; +#61856 = CIRCLE ( 'NONE', #10601, 10.00000000000009400 ) ; +#61857 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 42.16666666666665000, -9.205558038030003900 ) ) ; +#61858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61859 = EDGE_CURVE ( 'NONE', #19665, #71496, #77436, .T. ) ; +#61860 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61861 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878100, 90.16749699759768100, -28.23966044827355000 ) ) ; +#61862 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#61863 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24061, #61339, #36539, #80075 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852047800, 0.0009376791149930240700 ), + .UNSPECIFIED. ) ; +#61864 = CONICAL_SURFACE ( 'NONE', #71512, 10.00000000000009600, 0.7853981633974482800 ) ; +#61865 = EDGE_CURVE ( 'NONE', #43760, #74434, #62993, .T. ) ; +#61866 = AXIS2_PLACEMENT_3D ( 'NONE', #60396, #23127, #66631 ) ; +#61867 = AXIS2_PLACEMENT_3D ( 'NONE', #16095, #9836, #53341 ) ; +#61868 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.48922577050340600, -28.37255355648631300 ) ) ; +#61869 = EDGE_LOOP ( 'NONE', ( #59703, #69739, #40328 ) ) ; +#61870 = CIRCLE ( 'NONE', #2503, 10.00000000000009400 ) ; +#61871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60059, #66301, #41524, #4263 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815815803300E-007, 0.0007763385940577130800 ), + .UNSPECIFIED. ) ; +#61872 = ORIENTED_EDGE ( 'NONE', *, *, #78659, .F. ) ; +#61873 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528136700, 41.46868088498121800, -28.51286550264512700 ) ) ; +#61874 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103300, 89.94924284854707300, -28.20555803802997700 ) ) ; +#61875 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807245900, 56.80000000000004700, -28.70555803803014400 ) ) ; +#61876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61878 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 13.50000000000000900, 6.847000845227641200 ) ) ; +#61879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61880 = CIRCLE ( 'NONE', #43204, 10.50000000000009600 ) ; +#61881 = AXIS2_PLACEMENT_3D ( 'NONE', #41518, #4249, #47753 ) ; +#61882 = VECTOR ( 'NONE', #5447, 1000.000000000000000 ) ; +#61883 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#61884 = EDGE_LOOP ( 'NONE', ( #51251, #70460, #53428, #3721, #73782 ) ) ; +#61885 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 23.37738371066728100, -28.70555803802995200 ) ) ; +#61886 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40950, #78222, #9945, #53461 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392172109800E-007, 0.0003301092607755696300 ), + .UNSPECIFIED. ) ; +#61887 = CYLINDRICAL_SURFACE ( 'NONE', #22911, 10.00000000000000200 ) ; +#61888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61889 = EDGE_LOOP ( 'NONE', ( #62373, #43612, #5487, #3089, #75884 ) ) ; +#61890 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701863500, 85.79999999999998300, -28.70555803802997700 ) ) ; +#61891 = ORIENTED_EDGE ( 'NONE', *, *, #37862, .T. ) ; +#61892 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61893 = AXIS2_PLACEMENT_3D ( 'NONE', #29574, #35797, #66807 ) ; +#61894 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5568, #42808, #55059, #49046 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131287236400 ), + .UNSPECIFIED. ) ; +#61895 = FACE_OUTER_BOUND ( 'NONE', #5999, .T. ) ; +#61896 = ADVANCED_FACE ( 'NONE', ( #61275 ), #55377, .T. ) ; +#61897 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372569100, 26.43535825203924700, -28.53896444442196100 ) ) ; +#61899 = FACE_OUTER_BOUND ( 'NONE', #7018, .T. ) ; +#61898 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000012400, 45.00000000000002800, -1.205558038030006400 ) ) ; +#61900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61901 = ORIENTED_EDGE ( 'NONE', *, *, #78878, .T. ) ; +#61902 = CARTESIAN_POINT ( 'NONE', ( 11.74546181355822200, 49.59617548195244300, -28.64146967277533700 ) ) ; +#61903 = EDGE_CURVE ( 'NONE', #75076, #15598, #48470, .T. ) ; +#61904 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 48.00000000000000700, -1.205558038030002800 ) ) ; +#61905 = ORIENTED_EDGE ( 'NONE', *, *, #76419, .F. ) ; +#61906 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61907 = ORIENTED_EDGE ( 'NONE', *, *, #3633, .T. ) ; +#61908 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091595000, 48.02574874835213600, -28.70555803803001300 ) ) ; +#61909 = EDGE_LOOP ( 'NONE', ( #18162, #64259, #73283 ) ) ; +#61910 = ORIENTED_EDGE ( 'NONE', *, *, #32492, .F. ) ; +#61911 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 3.965082230804130200E-016 ) ) ; +#61912 = ADVANCED_FACE ( 'NONE', ( #71959 ), #22302, .F. ) ; +#61913 = CIRCLE ( 'NONE', #13012, 10.50000000000009900 ) ; +#61914 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051555300, 81.01872124563914200, -28.53757464917582700 ) ) ; +#61915 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205871200, 60.08245724453603700, -28.27504145778806300 ) ) ; +#61916 = VERTEX_POINT ( 'NONE', #40780 ) ; +#61917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61918 = ORIENTED_EDGE ( 'NONE', *, *, #42696, .F. ) ; +#61919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61921 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 22.20037755566824300, -28.53664883431607500 ) ) ; +#61922 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#61923 = CIRCLE ( 'NONE', #10732, 10.00000000000009200 ) ; +#61924 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000041000, 77.94142842854287800, -28.20555803803047800 ) ) ; +#61925 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61926 = EDGE_CURVE ( 'NONE', #47573, #26040, #34056, .T. ) ; +#61927 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328009400, 71.93585231025920700, -28.38420446581271900 ) ) ; +#61928 = ADVANCED_FACE ( 'NONE', ( #40783 ), #69961, .T. ) ; +#61929 = ORIENTED_EDGE ( 'NONE', *, *, #16175, .F. ) ; +#61930 = ADVANCED_FACE ( 'NONE', ( #42728 ), #36873, .T. ) ; +#61931 = FACE_OUTER_BOUND ( 'NONE', #38051, .T. ) ; +#61932 = EDGE_CURVE ( 'NONE', #15291, #75998, #53434, .T. ) ; +#61933 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#61934 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#61935 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543760500, 81.52472935029881300, -28.39317435246134400 ) ) ; +#61936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61937 = EDGE_CURVE ( 'NONE', #50519, #41205, #38815, .T. ) ; +#61938 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#61939 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#61940 = ORIENTED_EDGE ( 'NONE', *, *, #5013, .T. ) ; +#61941 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70165, #7875, #20683, #64226 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807048300, 0.0005317208426584801700 ), + .UNSPECIFIED. ) ; +#61942 = ADVANCED_FACE ( 'NONE', ( #59294 ), #51436, .F. ) ; +#61943 = EDGE_CURVE ( 'NONE', #10425, #3836, #68039, .T. ) ; +#61944 = FACE_OUTER_BOUND ( 'NONE', #58092, .T. ) ; +#61945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#61946 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 54.33333333333333600, -6.705558038030005700 ) ) ; +#61947 = CONICAL_SURFACE ( 'NONE', #5580, 10.50000000000009600, 0.7853981633974482800 ) ; +#61948 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.66749699759768800, -28.20555803802994200 ) ) ; +#61949 = ORIENTED_EDGE ( 'NONE', *, *, #29353, .F. ) ; +#61950 = FACE_OUTER_BOUND ( 'NONE', #53064, .T. ) ; +#61951 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 19.50000000000000700, 2.454695999814385600 ) ) ; +#61952 = AXIS2_PLACEMENT_3D ( 'NONE', #67617, #11865, #36591 ) ; +#61953 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 27.12623792124938800, -28.70555803802994200 ) ) ; +#61954 = EDGE_LOOP ( 'NONE', ( #27353, #64121, #34689, #65434 ) ) ; +#61955 = EDGE_CURVE ( 'NONE', #24749, #12646, #19598, .T. ) ; +#61956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#61957 = EDGE_CURVE ( 'NONE', #67715, #39653, #5130, .T. ) ; +#61958 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61959 = AXIS2_PLACEMENT_3D ( 'NONE', #47093, #9869, #53384 ) ; +#61960 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020500, 85.79999999999950000, -28.70555803803047500 ) ) ; +#61961 = CIRCLE ( 'NONE', #27039, 10.00000000000009200 ) ; +#61962 = CONICAL_SURFACE ( 'NONE', #24091, 10.50000000000009600, 0.7853981633974500600 ) ; +#61963 = ORIENTED_EDGE ( 'NONE', *, *, #33078, .F. ) ; +#61964 = CARTESIAN_POINT ( 'NONE', ( -10.98575180313127200, 70.01994747561620600, -28.24986299608849900 ) ) ; +#61965 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#61966 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 21.83333333333333600, -12.20555803803000600 ) ) ; +#61967 = CARTESIAN_POINT ( 'NONE', ( -16.73584074218855000, 29.17436051799359100, -28.45080305021059500 ) ) ; +#61968 = ORIENTED_EDGE ( 'NONE', *, *, #11290, .F. ) ; +#61969 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#61970 = EDGE_CURVE ( 'NONE', #75704, #52833, #71450, .T. ) ; +#61971 = VERTEX_POINT ( 'NONE', #41591 ) ; +#61972 = AXIS2_PLACEMENT_3D ( 'NONE', #39720, #39995, #21252 ) ; +#61973 = AXIS2_PLACEMENT_3D ( 'NONE', #25429, #31674, #19147 ) ; +#61974 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13658, #38618, #7623, #51107 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629350749307300E-007, 0.0007670609591623666800 ), + .UNSPECIFIED. ) ; +#61975 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 71.25732391202370800, -28.20555803803030800 ) ) ; +#61976 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 80.34267608797598800, -28.20555803802997700 ) ) ; +#61977 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61978 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 38.97246552159109700, -28.38801640354855500 ) ) ; +#61979 = CONICAL_SURFACE ( 'NONE', #30408, 10.00000000000009200, 0.7853981633974447300 ) ; +#61980 = ORIENTED_EDGE ( 'NONE', *, *, #22114, .F. ) ; +#61981 = CARTESIAN_POINT ( 'NONE', ( 15.22588627973387100, 67.33501542110238300, -28.70555803803002000 ) ) ; +#61982 = ORIENTED_EDGE ( 'NONE', *, *, #25117, .F. ) ; +#61983 = EDGE_LOOP ( 'NONE', ( #78847, #30179, #41260 ) ) ; +#61984 = ORIENTED_EDGE ( 'NONE', *, *, #40130, .F. ) ; +#61985 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49054, #5575, #61631, #24350 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185001300, 0.001517199873936116100 ), + .UNSPECIFIED. ) ; +#61986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61987 = ORIENTED_EDGE ( 'NONE', *, *, #37809, .T. ) ; +#61988 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61989 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474191500, 10.36172549728281200, -28.47230003642276600 ) ) ; +#61990 = PLANE ( 'NONE', #5557 ) ; +#61991 = FACE_OUTER_BOUND ( 'NONE', #59641, .T. ) ; +#61992 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61993 = EDGE_LOOP ( 'NONE', ( #36979, #31846, #53589, #33873 ) ) ; +#61994 = PLANE ( 'NONE', #9925 ) ; +#61995 = ADVANCED_FACE ( 'NONE', ( #3787 ), #1817, .F. ) ; +#61996 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 31.28933626866496500, -28.53923937255171200 ) ) ; +#61997 = CARTESIAN_POINT ( 'NONE', ( 15.78330646519572700, 70.79999999999967000, -28.32841359973469200 ) ) ; +#61998 = EDGE_LOOP ( 'NONE', ( #51682, #76822, #30751, #12572, #69273, #27624, #20319 ) ) ; +#61999 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567151900, 9.746602415621900700, -28.20555803802992800 ) ) ; +#62000 = CONICAL_SURFACE ( 'NONE', #33587, 10.50000000000009600, 0.7853981633974518300 ) ; +#62001 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 25.33333333333334600, 5.722645192245503900 ) ) ; +#62002 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#62003 = ORIENTED_EDGE ( 'NONE', *, *, #31078, .F. ) ; +#62004 = CIRCLE ( 'NONE', #32399, 9.500000000000101300 ) ; +#62005 = FACE_OUTER_BOUND ( 'NONE', #4368, .T. ) ; +#62006 = PLANE ( 'NONE', #10155 ) ; +#62007 = ADVANCED_FACE ( 'NONE', ( #20357 ), #49492, .T. ) ; +#62008 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#62009 = AXIS2_PLACEMENT_3D ( 'NONE', #14004, #20259, #70010 ) ; +#62010 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801596400, 60.90033558196090300, -28.70555803803014400 ) ) ; +#62011 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548965400, 20.44069092601378300, -28.35186440610856800 ) ) ; +#62012 = ORIENTED_EDGE ( 'NONE', *, *, #56743, .F. ) ; +#62013 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72908, #41870, #48109, #10891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.216025217875882900E-017, 0.001492013864175936000 ), + .UNSPECIFIED. ) ; +#62014 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555924900, 51.87833896172649200, -28.53892303408251900 ) ) ; +#62015 = EDGE_CURVE ( 'NONE', #26468, #2887, #66106, .T. ) ; +#62016 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#62017 = AXIS2_PLACEMENT_3D ( 'NONE', #76727, #39464, #2192 ) ; +#62018 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#62019 = CIRCLE ( 'NONE', #76611, 10.50000000000009600 ) ; +#62020 = VERTEX_POINT ( 'NONE', #66897 ) ; +#62021 = ADVANCED_FACE ( 'NONE', ( #5752 ), #80686, .T. ) ; +#62022 = CIRCLE ( 'NONE', #22745, 10.50000000000009600 ) ; +#62023 = ORIENTED_EDGE ( 'NONE', *, *, #9372, .T. ) ; +#62024 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#62025 = ORIENTED_EDGE ( 'NONE', *, *, #16074, .F. ) ; +#62026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62027 = ORIENTED_EDGE ( 'NONE', *, *, #4674, .T. ) ; +#62028 = FACE_OUTER_BOUND ( 'NONE', #31153, .T. ) ; +#62029 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62031 = VERTEX_POINT ( 'NONE', #17124 ) ; +#62030 = CARTESIAN_POINT ( 'NONE', ( 17.04026895850643400, 30.87561462481246400, -28.30309985153375900 ) ) ; +#62032 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#62033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57851, #70344, #33100, #76604 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972907029877300E-007, 0.0006651184466340315400 ), + .UNSPECIFIED. ) ; +#62034 = ADVANCED_FACE ( 'NONE', ( #16455 ), #47550, .T. ) ; +#62035 = CONICAL_SURFACE ( 'NONE', #27642, 10.00000000000009400, 0.7853981633974447300 ) ; +#62037 = EDGE_CURVE ( 'NONE', #51055, #22718, #57006, .T. ) ; +#62036 = ORIENTED_EDGE ( 'NONE', *, *, #66610, .F. ) ; +#62038 = EDGE_CURVE ( 'NONE', #28848, #17105, #32983, .T. ) ; +#62039 = CARTESIAN_POINT ( 'NONE', ( -17.40887775794658400, 28.92043992774117100, -28.41154406527801900 ) ) ; +#62040 = ORIENTED_EDGE ( 'NONE', *, *, #32711, .T. ) ; +#62041 = ADVANCED_FACE ( 'NONE', ( #57338 ), #78755, .F. ) ; +#62042 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 69.00000000000000000, -1.205558038030002800 ) ) ; +#62043 = CARTESIAN_POINT ( 'NONE', ( -3.031778038947783300, 90.28233213024636000, -28.25051428653859600 ) ) ; +#62044 = EDGE_CURVE ( 'NONE', #65478, #16201, #14490, .T. ) ; +#62045 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#62046 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 34.00000000000001400, -1.205558038030005300 ) ) ; +#62047 = CONICAL_SURFACE ( 'NONE', #61497, 10.50000000000009600, 0.7853981633974500600 ) ; +#62048 = EDGE_CURVE ( 'NONE', #35371, #65169, #42510, .T. ) ; +#62049 = CONICAL_SURFACE ( 'NONE', #5830, 10.50000000000009400, 0.7853981633974500600 ) ; +#62050 = AXIS2_PLACEMENT_3D ( 'NONE', #32794, #76309, #39029 ) ; +#62051 = ORIENTED_EDGE ( 'NONE', *, *, #47212, .T. ) ; +#62052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62053 = VERTEX_POINT ( 'NONE', #79948 ) ; +#62054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62055 = ORIENTED_EDGE ( 'NONE', *, *, #61707, .T. ) ; +#62056 = EDGE_LOOP ( 'NONE', ( #67041, #4042, #58374, #23565 ) ) ; +#62057 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, -0.8333333333333119400, 0.9380355014189834000 ) ) ; +#62058 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27770, #21515, #58746, #71261 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697186527600E-007, 0.0008724363063898942300 ), + .UNSPECIFIED. ) ; +#62059 = ORIENTED_EDGE ( 'NONE', *, *, #37331, .F. ) ; +#62060 = PLANE ( 'NONE', #33161 ) ; +#62061 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62062 = ORIENTED_EDGE ( 'NONE', *, *, #73238, .F. ) ; +#62063 = AXIS2_PLACEMENT_3D ( 'NONE', #66017, #10255, #3979 ) ; +#62064 = ORIENTED_EDGE ( 'NONE', *, *, #19496, .F. ) ; +#62065 = EDGE_CURVE ( 'NONE', #73052, #79539, #34964, .T. ) ; +#62066 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62067 = EDGE_CURVE ( 'NONE', #29557, #66793, #31051, .T. ) ; +#62068 = EDGE_CURVE ( 'NONE', #20451, #43592, #28095, .T. ) ; +#62069 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62070 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063433500, 18.00210619075126000, -28.25343951603342400 ) ) ; +#62071 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769044800, 19.81139552890386900, -28.53900456328624800 ) ) ; +#62072 = FACE_OUTER_BOUND ( 'NONE', #20436, .T. ) ; +#62073 = AXIS2_PLACEMENT_3D ( 'NONE', #23576, #29871, #73348 ) ; +#62074 = VERTEX_POINT ( 'NONE', #55432 ) ; +#62075 = CARTESIAN_POINT ( 'NONE', ( 10.24297557446588400, 90.16517473503358800, -28.29551658696724600 ) ) ; +#62076 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#62077 = ORIENTED_EDGE ( 'NONE', *, *, #46872, .T. ) ; +#62078 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62079 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62081 = CONICAL_SURFACE ( 'NONE', #13644, 10.00000000000009200, 0.7853981633974447300 ) ; +#62082 = EDGE_CURVE ( 'NONE', #31487, #34010, #13634, .T. ) ; +#62083 = CARTESIAN_POINT ( 'NONE', ( -3.148777716033726300E-014, 67.46443389862709200, -28.54207364681951700 ) ) ; +#62084 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000004900, 41.43250300240230600, -28.20555803802997700 ) ) ; +#62085 = CARTESIAN_POINT ( 'NONE', ( 15.05232299489569100, 75.84127283767757900, -28.70545439276234100 ) ) ; +#62086 = AXIS2_PLACEMENT_3D ( 'NONE', #13625, #57120, #19859 ) ; +#62087 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528150900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#62088 = AXIS2_PLACEMENT_3D ( 'NONE', #28332, #71813, #34552 ) ; +#62089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62090 = VERTEX_POINT ( 'NONE', #24452 ) ; +#62091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62092 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 71.25732391202376400, -28.20555803803014400 ) ) ; +#62093 = CARTESIAN_POINT ( 'NONE', ( 15.82622038785834400, 55.80000000000006800, -28.34928911331538600 ) ) ; +#62094 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#62095 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846313600, 60.79999999999999000, -28.55171188418376400 ) ) ; +#62096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62097 = LINE ( 'NONE', #75791, #37692 ) ; +#62098 = VERTEX_POINT ( 'NONE', #5956 ) ; +#62099 = CARTESIAN_POINT ( 'NONE', ( 2.042760264135985000, 85.79999999999998300, -28.53819074160730600 ) ) ; +#62100 = EDGE_LOOP ( 'NONE', ( #75251, #64428, #9570, #47856 ) ) ; +#62101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62102 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62103 = CONICAL_SURFACE ( 'NONE', #11264, 10.00000000000009400, 0.7853981633974447300 ) ; +#62104 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 41.46868088498121800, -28.51286550264512700 ) ) ; +#62105 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62106 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 22.43454006867178700, -28.70555803802998100 ) ) ; +#62107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62108 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30477, #36692, #18207, #61747 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293625900, 0.0007746639185392647000 ), + .UNSPECIFIED. ) ; +#62109 = AXIS2_PLACEMENT_3D ( 'NONE', #53085, #15845, #59365 ) ; +#62110 = CIRCLE ( 'NONE', #44716, 10.50000000000009600 ) ; +#62111 = ORIENTED_EDGE ( 'NONE', *, *, #34655, .F. ) ; +#62112 = ADVANCED_FACE ( 'NONE', ( #62194 ), #60249, .F. ) ; +#62113 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 10.18929190448942600, -28.20555803802994200 ) ) ; +#62114 = ADVANCED_FACE ( 'NONE', ( #24252 ), #61990, .T. ) ; +#62115 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 40.00000000000000700, 6.794441961969995200 ) ) ; +#62116 = ORIENTED_EDGE ( 'NONE', *, *, #55919, .T. ) ; +#62117 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#62118 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925540600, 10.78032162676603700, -28.55467576046969900 ) ) ; +#62119 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 40.90050506338822300, -28.70555803802997700 ) ) ; +#62120 = ADVANCED_FACE ( 'NONE', ( #18402 ), #10605, .F. ) ; +#62121 = FACE_OUTER_BOUND ( 'NONE', #4663, .T. ) ; +#62122 = FACE_OUTER_BOUND ( 'NONE', #78098, .T. ) ; +#62123 = ORIENTED_EDGE ( 'NONE', *, *, #43404, .F. ) ; +#62124 = ORIENTED_EDGE ( 'NONE', *, *, #15392, .F. ) ; +#62125 = AXIS2_PLACEMENT_3D ( 'NONE', #7992, #51489, #14277 ) ; +#62126 = ORIENTED_EDGE ( 'NONE', *, *, #39925, .T. ) ; +#62127 = ORIENTED_EDGE ( 'NONE', *, *, #68925, .F. ) ; +#62128 = ORIENTED_EDGE ( 'NONE', *, *, #28629, .T. ) ; +#62129 = VERTEX_POINT ( 'NONE', #6205 ) ; +#62130 = ORIENTED_EDGE ( 'NONE', *, *, #38405, .F. ) ; +#62131 = VERTEX_POINT ( 'NONE', #49686 ) ; +#62132 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.31066373133500800, -28.53923937255169500 ) ) ; +#62133 = ORIENTED_EDGE ( 'NONE', *, *, #48428, .T. ) ; +#62134 = ORIENTED_EDGE ( 'NONE', *, *, #3886, .F. ) ; +#62135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62136 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 11.33333333333334600, -10.73183747965883100 ) ) ; +#62137 = CIRCLE ( 'NONE', #41755, 10.00000000000009200 ) ; +#62139 = ORIENTED_EDGE ( 'NONE', *, *, #9451, .T. ) ; +#62138 = CARTESIAN_POINT ( 'NONE', ( 10.04026895850644200, 9.875614624812469000, -28.30309985153373400 ) ) ; +#62140 = EDGE_CURVE ( 'NONE', #69726, #68516, #43649, .T. ) ; +#62141 = ORIENTED_EDGE ( 'NONE', *, *, #12963, .F. ) ; +#62142 = ORIENTED_EDGE ( 'NONE', *, *, #70107, .T. ) ; +#62143 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#62144 = EDGE_CURVE ( 'NONE', #22539, #51876, #29147, .T. ) ; +#62145 = ORIENTED_EDGE ( 'NONE', *, *, #12012, .T. ) ; +#62146 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69839, #63615, #20092, #76095 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572543444100E-007, 0.0007596410370205472500 ), + .UNSPECIFIED. ) ; +#62147 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#62148 = CARTESIAN_POINT ( 'NONE', ( 15.20655873232855600, 28.06067300957098400, -28.70555803803002300 ) ) ; +#62149 = CIRCLE ( 'NONE', #5758, 10.00000000000009600 ) ; +#62150 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#62151 = EDGE_CURVE ( 'NONE', #20464, #23751, #45585, .T. ) ; +#62152 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.16749699759738200, -28.20555803803047800 ) ) ; +#62153 = ORIENTED_EDGE ( 'NONE', *, *, #21764, .T. ) ; +#62154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62155 = EDGE_CURVE ( 'NONE', #73052, #18860, #76758, .T. ) ; +#62156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62157 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#62158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62159 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 45.83333333333334300, 0.1341879241256075400 ) ) ; +#62160 = EDGE_CURVE ( 'NONE', #43614, #80692, #27156, .T. ) ; +#62161 = FACE_OUTER_BOUND ( 'NONE', #28065, .T. ) ; +#62162 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#62163 = ORIENTED_EDGE ( 'NONE', *, *, #68735, .T. ) ; +#62164 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#62165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62166 = VERTEX_POINT ( 'NONE', #68760 ) ; +#62167 = VERTEX_POINT ( 'NONE', #19243 ) ; +#62168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62170 = AXIS2_PLACEMENT_3D ( 'NONE', #27692, #71189, #33922 ) ; +#62171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62172 = EDGE_CURVE ( 'NONE', #51526, #63652, #12554, .T. ) ; +#62173 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#62174 = EDGE_CURVE ( 'NONE', #23799, #26055, #79942, .T. ) ; +#62175 = EDGE_CURVE ( 'NONE', #68932, #35598, #65498, .T. ) ; +#62176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62178 = PLANE ( 'NONE', #49876 ) ; +#62179 = AXIS2_PLACEMENT_3D ( 'NONE', #79657, #29937, #36156 ) ; +#62180 = FACE_OUTER_BOUND ( 'NONE', #29438, .T. ) ; +#62181 = FACE_OUTER_BOUND ( 'NONE', #37581, .T. ) ; +#62182 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#62183 = ORIENTED_EDGE ( 'NONE', *, *, #30166, .F. ) ; +#62184 = ORIENTED_EDGE ( 'NONE', *, *, #76809, .T. ) ; +#62185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62186 = CARTESIAN_POINT ( 'NONE', ( -2.254548258615130400, 28.59617684379260200, -28.64146614751464500 ) ) ; +#62187 = AXIS2_PLACEMENT_3D ( 'NONE', #3396, #34439, #46902 ) ; +#62188 = AXIS2_PLACEMENT_3D ( 'NONE', #4891, #48387, #11175 ) ; +#62189 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528193500, 39.13131911501876200, -28.51286550264508400 ) ) ; +#62190 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62193 = ADVANCED_FACE ( 'NONE', ( #41711 ), #39766, .T. ) ; +#62192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22525, #59804, #47502, #10283 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351388594800E-007, 0.0004318366892330737800 ), + .UNSPECIFIED. ) ; +#62194 = FACE_OUTER_BOUND ( 'NONE', #52318, .T. ) ; +#62195 = EDGE_LOOP ( 'NONE', ( #70481, #31290, #64394 ) ) ; +#62196 = CONICAL_SURFACE ( 'NONE', #58376, 10.00000000000009400, 0.7853981633974447300 ) ; +#62197 = VERTEX_POINT ( 'NONE', #75536 ) ; +#62198 = ORIENTED_EDGE ( 'NONE', *, *, #62411, .F. ) ; +#62199 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005300, 41.25489551879204700, -28.37193179497697300 ) ) ; +#62200 = EDGE_LOOP ( 'NONE', ( #48788, #45287, #10089, #73153 ) ) ; +#62201 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 52.16666666666667900, 1.741883078712356500 ) ) ; +#62202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52133, #64450, #70925, #33670 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217710631560500E-007, 0.0008482615949373553500 ), + .UNSPECIFIED. ) ; +#62203 = CIRCLE ( 'NONE', #41313, 10.00000000000009600 ) ; +#62204 = ORIENTED_EDGE ( 'NONE', *, *, #46088, .F. ) ; +#62205 = EDGE_LOOP ( 'NONE', ( #31428, #60250, #53095, #9840, #74698, #29780, #13157 ) ) ; +#62206 = VERTEX_POINT ( 'NONE', #44487 ) ; +#62208 = ORIENTED_EDGE ( 'NONE', *, *, #72518, .F. ) ; +#62207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62209 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66214, #22945, #16968, #60494 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838259789648300E-007, 0.0004559721492008839200 ), + .UNSPECIFIED. ) ; +#62210 = ADVANCED_FACE ( 'NONE', ( #58269 ), #6680, .T. ) ; +#62211 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 17.33333333333333900, -3.705558038030004400 ) ) ; +#62212 = AXIS2_PLACEMENT_3D ( 'NONE', #78569, #41259, #4001 ) ; +#62213 = EDGE_LOOP ( 'NONE', ( #55658, #43657, #66236 ) ) ; +#62214 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#62215 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782560200, 60.16054007504464400, -28.34042301926892900 ) ) ; +#62216 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#62217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74514, #31005, #6236, #49705 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.868354362588067700E-017, 0.001179148174662947400 ), + .UNSPECIFIED. ) ; +#62218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62219 = CONICAL_SURFACE ( 'NONE', #17240, 10.50000000000009800, 0.7853981633974518300 ) ; +#62220 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ; +#62221 = ORIENTED_EDGE ( 'NONE', *, *, #30125, .F. ) ; +#62222 = ORIENTED_EDGE ( 'NONE', *, *, #13671, .T. ) ; +#62223 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819192900, 51.65075715145311400, -28.20555803802997700 ) ) ; +#62224 = EDGE_CURVE ( 'NONE', #20897, #43426, #50961, .T. ) ; +#62225 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567171400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#62226 = EDGE_LOOP ( 'NONE', ( #43406, #6851, #65077 ) ) ; +#62227 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 19.66666666666666800, 8.320721403598824400 ) ) ; +#62228 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868443300, 29.01513784120220100, -28.32821106612155000 ) ) ; +#62229 = ORIENTED_EDGE ( 'NONE', *, *, #54396, .T. ) ; +#62230 = AXIS2_PLACEMENT_3D ( 'NONE', #69766, #20553, #64080 ) ; +#62231 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62232 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528187700, 28.63131911501876900, -28.51286550264507700 ) ) ; +#62233 = FACE_OUTER_BOUND ( 'NONE', #68056, .T. ) ; +#62234 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 11.47376207875060000, -28.70555803802994200 ) ) ; +#62235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62237 = EDGE_LOOP ( 'NONE', ( #24141, #5476, #1423 ) ) ; +#62236 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62238 = ADVANCED_FACE ( 'NONE', ( #74829 ), #56310, .T. ) ; +#62239 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#62240 = CARTESIAN_POINT ( 'NONE', ( 16.42212147479900600, 41.48660297389273000, -28.58281552185032800 ) ) ; +#62241 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658264500, 60.15151454780964000, -28.67627428870436600 ) ) ; +#62242 = AXIS2_PLACEMENT_3D ( 'NONE', #77781, #40516, #3239 ) ; +#62243 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#62244 = CIRCLE ( 'NONE', #47288, 10.00000000000009400 ) ; +#62245 = ORIENTED_EDGE ( 'NONE', *, *, #51995, .T. ) ; +#62246 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#62247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62248 = EDGE_LOOP ( 'NONE', ( #58377, #52058, #71104 ) ) ; +#62249 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#62250 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 90.16749699759768100, -28.20555803802997700 ) ) ; +#62251 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155400, 90.69966441803842400, -28.70555803803047500 ) ) ; +#62252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12451, #61967, #62228, #24951 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258657667400, 0.0009376791149928449600 ), + .UNSPECIFIED. ) ; +#62254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62255 = PLANE ( 'NONE', #31118 ) ; +#62256 = EDGE_CURVE ( 'NONE', #77643, #5229, #36530, .T. ) ; +#62257 = FACE_OUTER_BOUND ( 'NONE', #52001, .T. ) ; +#62258 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 23.16666666666668900, -9.205558038030003900 ) ) ; +#62259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62261 = FACE_OUTER_BOUND ( 'NONE', #21543, .T. ) ; +#62262 = ORIENTED_EDGE ( 'NONE', *, *, #38279, .F. ) ; +#62263 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506376400, 39.08087956867516500, -28.30223257055570600 ) ) ; +#62264 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 9.940690926013795400, -28.35186440610855000 ) ) ; +#62266 = ORIENTED_EDGE ( 'NONE', *, *, #32828, .F. ) ; +#62265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62267 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000700, 29.84772751981643100, -28.70555803802999200 ) ) ; +#62268 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#62269 = FACE_OUTER_BOUND ( 'NONE', #56501, .T. ) ; +#62270 = EDGE_LOOP ( 'NONE', ( #74533, #13151, #76553, #71393 ) ) ; +#62271 = CIRCLE ( 'NONE', #58848, 9.500000000000097700 ) ; +#62272 = ORIENTED_EDGE ( 'NONE', *, *, #24320, .F. ) ; +#62273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62274 = EDGE_CURVE ( 'NONE', #62691, #74526, #22093, .T. ) ; +#62275 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 59.28967419478899400, -28.59353418718932400 ) ) ; +#62276 = EDGE_CURVE ( 'NONE', #15453, #28717, #7587, .T. ) ; +#62277 = CONICAL_SURFACE ( 'NONE', #20965, 10.00000000000009600, 0.7853981633974447300 ) ; +#62278 = ORIENTED_EDGE ( 'NONE', *, *, #56436, .F. ) ; +#62279 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999994000, 38.63176086632793000, -28.70555803802995200 ) ) ; +#62280 = ORIENTED_EDGE ( 'NONE', *, *, #18335, .F. ) ; +#62281 = ORIENTED_EDGE ( 'NONE', *, *, #33078, .T. ) ; +#62282 = CARTESIAN_POINT ( 'NONE', ( -1.370431546021677600E-013, 87.94142842854310500, -28.20555803802997700 ) ) ; +#62283 = VERTEX_POINT ( 'NONE', #51277 ) ; +#62284 = ORIENTED_EDGE ( 'NONE', *, *, #33978, .T. ) ; +#62285 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428583600, 80.07141756547893900, -28.70555803802997700 ) ) ; +#62286 = EDGE_LOOP ( 'NONE', ( #47175, #6338, #58460 ) ) ; +#62287 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#62288 = AXIS2_PLACEMENT_3D ( 'NONE', #50206, #13003, #56486 ) ; +#62289 = ORIENTED_EDGE ( 'NONE', *, *, #60753, .F. ) ; +#62290 = EDGE_CURVE ( 'NONE', #63100, #57912, #23240, .T. ) ; +#62291 = EDGE_CURVE ( 'NONE', #12259, #39296, #73955, .T. ) ; +#62292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62293 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52030, #76815, #39548, #14798, #58321, #21081 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002534260069688668400, 0.005068520139377336900 ), + .UNSPECIFIED. ) ; +#62294 = EDGE_CURVE ( 'NONE', #58503, #49697, #25192, .T. ) ; +#62295 = CARTESIAN_POINT ( 'NONE', ( -15.11625473641674400, 35.04999999999997600, -28.53994725305376400 ) ) ; +#62296 = ADVANCED_FACE ( 'NONE', ( #37803 ), #52388, .F. ) ; +#62297 = CIRCLE ( 'NONE', #67760, 9.500000000000101300 ) ; +#62298 = AXIS2_PLACEMENT_3D ( 'NONE', #66438, #5524, #73802 ) ; +#62299 = ORIENTED_EDGE ( 'NONE', *, *, #25007, .F. ) ; +#62300 = ORIENTED_EDGE ( 'NONE', *, *, #45693, .F. ) ; +#62301 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679516300, 60.51916201875676600, -28.45106778992441200 ) ) ; +#62302 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#62303 = ORIENTED_EDGE ( 'NONE', *, *, #48383, .F. ) ; +#62304 = ORIENTED_EDGE ( 'NONE', *, *, #28602, .T. ) ; +#62305 = ORIENTED_EDGE ( 'NONE', *, *, #48918, .T. ) ; +#62306 = ORIENTED_EDGE ( 'NONE', *, *, #59793, .T. ) ; +#62307 = CARTESIAN_POINT ( 'NONE', ( 16.99797853026654000, 18.28907435382905100, -28.25433648786298200 ) ) ; +#62308 = CONICAL_SURFACE ( 'NONE', #58747, 10.50000000000009600, 0.7853981633974518300 ) ; +#62309 = ADVANCED_FACE ( 'NONE', ( #54364 ), #19324, .F. ) ; +#62310 = AXIS2_PLACEMENT_3D ( 'NONE', #68288, #31041, #74559 ) ; +#62311 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 66.83333333333334300, -2.545304000185615800 ) ) ; +#62312 = AXIS2_PLACEMENT_3D ( 'NONE', #78831, #10546, #16532 ) ; +#62313 = EDGE_LOOP ( 'NONE', ( #39527, #1312, #37138, #41701 ) ) ; +#62314 = AXIS2_PLACEMENT_3D ( 'NONE', #41871, #17143, #60676 ) ; +#62315 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#62316 = EDGE_LOOP ( 'NONE', ( #20925, #15147, #15625, #27010 ) ) ; +#62317 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#62318 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 31.83333333333333900, -3.349151577478984600 ) ) ; +#62319 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35191, #22925, #41666, #4415 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003770876678003485100, 0.0007670610367933406000 ), + .UNSPECIFIED. ) ; +#62320 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433200, 87.93535825203922200, -28.53896444442201000 ) ) ; +#62321 = LINE ( 'NONE', #69221, #14624 ) ; +#62323 = ORIENTED_EDGE ( 'NONE', *, *, #6858, .T. ) ; +#62322 = ADVANCED_FACE ( 'NONE', ( #4722 ), #67024, .F. ) ; +#62324 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62325 = ADVANCED_FACE ( 'NONE', ( #8613 ), #33929, .T. ) ; +#62326 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 69.16666666666665700, -4.152999154772358800 ) ) ; +#62327 = VERTEX_POINT ( 'NONE', #20874 ) ; +#62328 = ORIENTED_EDGE ( 'NONE', *, *, #32006, .T. ) ; +#62329 = AXIS2_PLACEMENT_3D ( 'NONE', #64880, #27606, #71099 ) ; +#62330 = EDGE_CURVE ( 'NONE', #6922, #42900, #50423, .T. ) ; +#62331 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73642, #194, #56220, #18964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466051796741600E-007, 0.0002929914227452654800 ), + .UNSPECIFIED. ) ; +#62332 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 60.34267608797618000, -28.20555803803014400 ) ) ; +#62333 = ADVANCED_FACE ( 'NONE', ( #2749 ), #48480, .F. ) ; +#62334 = CARTESIAN_POINT ( 'NONE', ( -15.43166316811158400, 54.54539096019117000, -28.69802137271993600 ) ) ; +#62335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62337 = CONICAL_SURFACE ( 'NONE', #70867, 10.00000000000009200, 0.7853981633974447300 ) ; +#62338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62339 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62340 = EDGE_CURVE ( 'NONE', #19038, #43835, #59490, .T. ) ; +#62341 = ORIENTED_EDGE ( 'NONE', *, *, #74044, .T. ) ; +#62342 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909300, 66.76150692817284900, -28.68631150211663100 ) ) ; +#62343 = EDGE_LOOP ( 'NONE', ( #36735, #79699, #57977 ) ) ; +#62344 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62345 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194923200, 56.76150692817307700, -28.68631150211662400 ) ) ; +#62346 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#62347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62348 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551700, 75.46616414991787300, -28.37247596307129500 ) ) ; +#62349 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62351 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36388, #17665, #54896, #79944 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466043647750000E-007, 0.0002929914227444455600 ), + .UNSPECIFIED. ) ; +#62350 = CARTESIAN_POINT ( 'NONE', ( -16.42212147481422600, 9.986602973891249800, -28.58281552184496000 ) ) ; +#62352 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.30277574221155100, -28.32715733700494500 ) ) ; +#62353 = CONICAL_SURFACE ( 'NONE', #16417, 10.50000000000009600, 0.7853981633974500600 ) ; +#62354 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963500, 39.15930907398619400, -28.35186440610857500 ) ) ; +#62355 = VERTEX_POINT ( 'NONE', #27408 ) ; +#62356 = AXIS2_PLACEMENT_3D ( 'NONE', #80553, #43262, #6030 ) ; +#62357 = EDGE_LOOP ( 'NONE', ( #67110, #23483, #18140, #37272 ) ) ; +#62358 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 79.97246552159111800, -28.38801640354855100 ) ) ; +#62359 = CIRCLE ( 'NONE', #49025, 10.00000000000009200 ) ; +#62360 = ORIENTED_EDGE ( 'NONE', *, *, #68786, .T. ) ; +#62362 = ORIENTED_EDGE ( 'NONE', *, *, #12180, .T. ) ; +#62361 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62363 = EDGE_LOOP ( 'NONE', ( #48618, #3561, #58372 ) ) ; +#62364 = EDGE_LOOP ( 'NONE', ( #21258, #27492, #79348, #42739 ) ) ; +#62365 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387502000, 55.13282980700523000, -28.53914313452735700 ) ) ; +#62366 = AXIS2_PLACEMENT_3D ( 'NONE', #75885, #38587, #1337 ) ; +#62367 = ORIENTED_EDGE ( 'NONE', *, *, #46042, .T. ) ; +#62368 = FACE_OUTER_BOUND ( 'NONE', #55617, .T. ) ; +#62369 = EDGE_CURVE ( 'NONE', #63863, #44569, #44969, .T. ) ; +#62370 = ORIENTED_EDGE ( 'NONE', *, *, #57620, .F. ) ; +#62371 = ORIENTED_EDGE ( 'NONE', *, *, #42209, .T. ) ; +#62372 = ORIENTED_EDGE ( 'NONE', *, *, #67931, .T. ) ; +#62373 = ORIENTED_EDGE ( 'NONE', *, *, #41932, .F. ) ; +#62374 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62375 = ORIENTED_EDGE ( 'NONE', *, *, #21338, .T. ) ; +#62376 = CIRCLE ( 'NONE', #11827, 10.00000000000009200 ) ; +#62377 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 37.83333333333333600, -9.205558038030003900 ) ) ; +#62378 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#62379 = ORIENTED_EDGE ( 'NONE', *, *, #22120, .F. ) ; +#62380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51169, #7683, #63762, #26508 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.238204282289467400E-016, 0.001492013864176155500 ), + .UNSPECIFIED. ) ; +#62381 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62382 = CARTESIAN_POINT ( 'NONE', ( -10.37150777124396100, 61.43250300240229200, -28.25053031809458700 ) ) ; +#62383 = ADVANCED_FACE ( 'NONE', ( #65095 ), #15436, .T. ) ; +#62384 = ORIENTED_EDGE ( 'NONE', *, *, #19560, .F. ) ; +#62385 = EDGE_CURVE ( 'NONE', #69868, #28848, #30579, .T. ) ; +#62386 = CONICAL_SURFACE ( 'NONE', #6578, 10.50000000000009600, 0.7853981633974518300 ) ; +#62388 = ORIENTED_EDGE ( 'NONE', *, *, #62874, .F. ) ; +#62387 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000044000, 30.40050506338820200, -28.70555803802996700 ) ) ; +#62389 = ADVANCED_FACE ( 'NONE', ( #17394 ), #63132, .F. ) ; +#62390 = AXIS2_PLACEMENT_3D ( 'NONE', #67060, #73058, #54539 ) ; +#62391 = EDGE_CURVE ( 'NONE', #4551, #45860, #68971, .T. ) ; +#62392 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#62393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62395 = CARTESIAN_POINT ( 'NONE', ( -3.691886274583917600, 50.08874248361073000, -28.53740755999537600 ) ) ; +#62396 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999957000, 71.56248377813391000, -28.32723995587615600 ) ) ; +#62397 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 9.166666666666664300, 9.794441961969994300 ) ) ; +#62398 = EDGE_CURVE ( 'NONE', #65938, #56249, #79664, .T. ) ; +#62399 = AXIS2_PLACEMENT_3D ( 'NONE', #66359, #41583, #4326 ) ; +#62400 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474191200, 31.36172549728279800, -28.47230003642276600 ) ) ; +#62401 = ADVANCED_FACE ( 'NONE', ( #35883 ), #61192, .T. ) ; +#62402 = ORIENTED_EDGE ( 'NONE', *, *, #4698, .T. ) ; +#62403 = EDGE_LOOP ( 'NONE', ( #36393, #80608, #62437 ) ) ; +#62404 = CARTESIAN_POINT ( 'NONE', ( 15.51770601915501400, 8.964587961689977300, -28.65180968932673600 ) ) ; +#62405 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372529000, 63.66464174796065800, -28.53896444442249700 ) ) ; +#62406 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .F. ) ; +#62407 = AXIS2_PLACEMENT_3D ( 'NONE', #12461, #55956, #18708 ) ; +#62408 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034900, 49.65930907398620800, -28.35186440610858900 ) ) ; +#62409 = AXIS2_PLACEMENT_3D ( 'NONE', #21531, #65062, #27799 ) ; +#62410 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22292, #53569, #72361, #35104 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185112300, 0.001517199873936352900 ), + .UNSPECIFIED. ) ; +#62411 = EDGE_CURVE ( 'NONE', #46654, #49270, #16103, .T. ) ; +#62412 = EDGE_CURVE ( 'NONE', #44743, #31689, #77707, .T. ) ; +#62413 = ADVANCED_FACE ( 'NONE', ( #31983 ), #11551, .T. ) ; +#62414 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62415 = AXIS2_PLACEMENT_3D ( 'NONE', #42067, #4809, #48310 ) ; +#62416 = CIRCLE ( 'NONE', #33561, 9.500000000000101300 ) ; +#62417 = ORIENTED_EDGE ( 'NONE', *, *, #42705, .F. ) ; +#62418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62419 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#62420 = ORIENTED_EDGE ( 'NONE', *, *, #20234, .F. ) ; +#62421 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 43.66666666666666400, -3.705558038030004400 ) ) ; +#62422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62423 = ORIENTED_EDGE ( 'NONE', *, *, #67980, .F. ) ; +#62424 = FACE_OUTER_BOUND ( 'NONE', #30195, .T. ) ; +#62425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62426 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25377, #31628, #50335, #13143 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0002673660010786276900 ), + .UNSPECIFIED. ) ; +#62427 = EDGE_LOOP ( 'NONE', ( #23591, #43930, #31988, #27546, #62578 ) ) ; +#62428 = ORIENTED_EDGE ( 'NONE', *, *, #76101, .F. ) ; +#62429 = EDGE_LOOP ( 'NONE', ( #59933, #52819, #24450, #61284 ) ) ; +#62430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62431 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#62433 = VERTEX_POINT ( 'NONE', #3413 ) ; +#62432 = EDGE_CURVE ( 'NONE', #17412, #2995, #1612, .T. ) ; +#62434 = ADVANCED_FACE ( 'NONE', ( #30068 ), #59213, .T. ) ; +#62435 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 80.34267608797551900, -28.20555803803014400 ) ) ; +#62436 = CARTESIAN_POINT ( 'NONE', ( 3.040273598549610300, 49.72437813624628700, -28.30310527599303000 ) ) ; +#62437 = ORIENTED_EDGE ( 'NONE', *, *, #51833, .T. ) ; +#62438 = AXIS2_PLACEMENT_3D ( 'NONE', #69484, #19732, #26004 ) ; +#62439 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 81.36762008758023500, -28.26633708900911700 ) ) ; +#62440 = AXIS2_PLACEMENT_3D ( 'NONE', #71506, #15482, #34236 ) ; +#62441 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62442 = CONICAL_SURFACE ( 'NONE', #27061, 10.00000000000009600, 0.7853981633974482800 ) ; +#62443 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#62444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62445 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62448 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343036000, 70.94992009694570400, -28.43638873268705000 ) ) ; +#62449 = FACE_OUTER_BOUND ( 'NONE', #46781, .T. ) ; +#62450 = ORIENTED_EDGE ( 'NONE', *, *, #43527, .T. ) ; +#62451 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#62452 = VERTEX_POINT ( 'NONE', #78235 ) ; +#62453 = CARTESIAN_POINT ( 'NONE', ( -17.14620600645635000, 89.08128969594170600, -28.47270666107740700 ) ) ; +#62454 = ORIENTED_EDGE ( 'NONE', *, *, #72024, .F. ) ; +#62455 = ORIENTED_EDGE ( 'NONE', *, *, #77856, .T. ) ; +#62456 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 59.41684396980716800, -28.70555803802999500 ) ) ; +#62457 = ORIENTED_EDGE ( 'NONE', *, *, #31893, .T. ) ; +#62458 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 87.94142842854303400, -28.20555803803030800 ) ) ; +#62459 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#62460 = CIRCLE ( 'NONE', #80561, 10.00000000000009400 ) ; +#62461 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62462 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#62463 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519000, 65.79999999999982700, -28.63843632546338100 ) ) ; +#62464 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567171400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#62465 = EDGE_LOOP ( 'NONE', ( #45333, #42338, #30636 ) ) ; +#62466 = AXIS2_PLACEMENT_3D ( 'NONE', #27960, #71440, #34183 ) ; +#62467 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#62468 = FACE_OUTER_BOUND ( 'NONE', #61884, .T. ) ; +#62469 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 50.00000000000002100, -1.205558038030002800 ) ) ; +#62470 = ORIENTED_EDGE ( 'NONE', *, *, #75344, .T. ) ; +#62471 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 15.16666666666667500, 0.1341879241256129200 ) ) ; +#62472 = AXIS2_PLACEMENT_3D ( 'NONE', #61718, #24444, #67950 ) ; +#62473 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609168300, 81.46283204837325800, -28.48697406221694800 ) ) ; +#62474 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49179, #22327, #18211, #61751 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736088091100E-007, 0.0006896863566006249100 ), + .UNSPECIFIED. ) ; +#62475 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900884300, 20.53732497909458100, -28.41043597897466500 ) ) ; +#62476 = EDGE_CURVE ( 'NONE', #30084, #80791, #67952, .T. ) ; +#62477 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661479100, 38.99322649091141800, -28.30799595738880500 ) ) ; +#62478 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 10.12753447840916400, -28.38801640354880000 ) ) ; +#62479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62480 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 17.50000000000000000, -9.258116921287651700 ) ) ; +#62481 = ORIENTED_EDGE ( 'NONE', *, *, #53458, .F. ) ; +#62482 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849102500, 18.27966528189938700, -28.30868034705269700 ) ) ; +#62483 = EDGE_LOOP ( 'NONE', ( #47404, #50142, #33576 ) ) ; +#62484 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#62485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62488 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034432000, 41.67701665379240000, -28.20555803802997400 ) ) ; +#62489 = CIRCLE ( 'NONE', #4843, 10.00000000000009400 ) ; +#62490 = ORIENTED_EDGE ( 'NONE', *, *, #51008, .F. ) ; +#62491 = VERTEX_POINT ( 'NONE', #16223 ) ; +#62492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62493 = EDGE_CURVE ( 'NONE', #50418, #65517, #75754, .T. ) ; +#62494 = ADVANCED_FACE ( 'NONE', ( #44549 ), #3684, .T. ) ; +#62495 = FACE_OUTER_BOUND ( 'NONE', #67198, .T. ) ; +#62496 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345591200, 70.07527064970102500, -28.39317435246135100 ) ) ; +#62497 = EDGE_CURVE ( 'NONE', #77718, #76520, #812, .T. ) ; +#62498 = VERTEX_POINT ( 'NONE', #10232 ) ; +#62499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71278, #77527, #15520, #59026 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001119323292487384500 ), + .UNSPECIFIED. ) ; +#62500 = ORIENTED_EDGE ( 'NONE', *, *, #23790, .F. ) ; +#62501 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026183300, 35.04999999999746100, -28.70555803802995200 ) ) ; +#62502 = EDGE_LOOP ( 'NONE', ( #15578, #44637, #17634, #60161 ) ) ; +#62503 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046200, 80.16749699759736800, -28.20555803803047800 ) ) ; +#62504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62505 = ADVANCED_FACE ( 'NONE', ( #46527 ), #57266, .F. ) ; +#62506 = ORIENTED_EDGE ( 'NONE', *, *, #65273, .F. ) ; +#62507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62508 = EDGE_LOOP ( 'NONE', ( #65895, #27632, #51190 ) ) ; +#62509 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26928, #1599, #39403, #2123 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351358655900E-007, 0.0004318366892330758900 ), + .UNSPECIFIED. ) ; +#62510 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#62511 = FACE_OUTER_BOUND ( 'NONE', #21008, .T. ) ; +#62512 = EDGE_CURVE ( 'NONE', #35501, #11350, #53493, .T. ) ; +#62513 = ADVANCED_FACE ( 'NONE', ( #9566 ), #24192, .T. ) ; +#62514 = SURFACE_STYLE_USAGE ( .BOTH. , #18980 ) ; +#62516 = CARTESIAN_POINT ( 'NONE', ( -15.08138858293179400, 9.837222834136394300, -28.70456437345707100 ) ) ; +#62515 = CARTESIAN_POINT ( 'NONE', ( -9.881064473890866400, 80.49763722318499500, -28.32100408376067700 ) ) ; +#62517 = EDGE_CURVE ( 'NONE', #47492, #15757, #40704, .T. ) ; +#62518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62519 = EDGE_LOOP ( 'NONE', ( #2452, #832, #74145 ) ) ; +#62520 = AXIS2_PLACEMENT_3D ( 'NONE', #40358, #3088, #46584 ) ; +#62521 = CONICAL_SURFACE ( 'NONE', #31665, 10.50000000000009600, 0.7853981633974500600 ) ; +#62522 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#62523 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 21.00000000000000400, 6.794441961969995200 ) ) ; +#62524 = ORIENTED_EDGE ( 'NONE', *, *, #30701, .T. ) ; +#62525 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#62526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#62527 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ; +#62528 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35376, #35879, #4865, #48361 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634381314300E-007, 0.0008082706238601679900 ), + .UNSPECIFIED. ) ; +#62529 = VERTEX_POINT ( 'NONE', #60290 ) ; +#62530 = ORIENTED_EDGE ( 'NONE', *, *, #13789, .F. ) ; +#62531 = FACE_OUTER_BOUND ( 'NONE', #41439, .T. ) ; +#62532 = ORIENTED_EDGE ( 'NONE', *, *, #75384, .F. ) ; +#62533 = CONICAL_SURFACE ( 'NONE', #47640, 10.50000000000009900, 0.7853981633974518300 ) ; +#62534 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#62535 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811646200, 39.20564881207762700, -28.41114655922298800 ) ) ; +#62536 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62537 = AXIS2_PLACEMENT_3D ( 'NONE', #807, #44299, #7063 ) ; +#62538 = EDGE_CURVE ( 'NONE', #3715, #69811, #26145, .T. ) ; +#62539 = EDGE_CURVE ( 'NONE', #45996, #21089, #73823, .T. ) ; +#62540 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100680400, 38.62363993080087700, -28.38670679782167000 ) ) ; +#62541 = EDGE_CURVE ( 'NONE', #6864, #20495, #42649, .T. ) ; +#62542 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62544 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62545 = AXIS2_PLACEMENT_3D ( 'NONE', #33568, #52031, #15073 ) ; +#62546 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#62547 = CIRCLE ( 'NONE', #24227, 9.500000000000095900 ) ; +#62548 = ORIENTED_EDGE ( 'NONE', *, *, #46080, .T. ) ; +#62549 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972380700, 82.22511094383806100, -28.55192314908441600 ) ) ; +#62550 = AXIS2_PLACEMENT_3D ( 'NONE', #5255, #36004, #23768 ) ; +#62551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62552 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#62553 = EDGE_CURVE ( 'NONE', #34264, #79096, #28107, .T. ) ; +#62554 = AXIS2_PLACEMENT_3D ( 'NONE', #24510, #68020, #30778 ) ; +#62555 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466633200, 50.33106028708534300, -28.57333386111659500 ) ) ; +#62556 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103300, 89.94924284854707300, -28.20555803802997700 ) ) ; +#62557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62558 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32373, #69623, #38593, #1341 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727633030110900E-007, 0.0004064396303279391800 ), + .UNSPECIFIED. ) ; +#62559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62560 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943633700, 14.05000000000011400, -28.70555803803025800 ) ) ; +#62561 = VERTEX_POINT ( 'NONE', #11040 ) ; +#62562 = ORIENTED_EDGE ( 'NONE', *, *, #76681, .F. ) ; +#62563 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 64.66666666666667100, 1.294441961969997200 ) ) ; +#62564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#62565 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62566 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 29.66666666666667500, 2.794441961969992100 ) ) ; +#62567 = CIRCLE ( 'NONE', #77759, 9.500000000000097700 ) ; +#62568 = AXIS2_PLACEMENT_3D ( 'NONE', #26345, #1544, #32560 ) ; +#62569 = ORIENTED_EDGE ( 'NONE', *, *, #37121, .T. ) ; +#62570 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007600, 72.97376207875005600, -28.70555803803047500 ) ) ; +#62571 = CONICAL_SURFACE ( 'NONE', #27434, 10.00000000000009200, 0.7853981633974447300 ) ; +#62572 = ORIENTED_EDGE ( 'NONE', *, *, #8889, .T. ) ; +#62573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62574 = CARTESIAN_POINT ( 'NONE', ( -9.530136888809618500, 9.146957350529762100, -28.66910751791843400 ) ) ; +#62575 = EDGE_LOOP ( 'NONE', ( #72501, #37565, #41276, #69773 ) ) ; +#62576 = CONICAL_SURFACE ( 'NONE', #14214, 10.50000000000009600, 0.7853981633974500600 ) ; +#62577 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 67.00000000000000000, -1.205558038030002800 ) ) ; +#62578 = ORIENTED_EDGE ( 'NONE', *, *, #23399, .F. ) ; +#62579 = ORIENTED_EDGE ( 'NONE', *, *, #63713, .F. ) ; +#62580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62581 = ORIENTED_EDGE ( 'NONE', *, *, #30360, .F. ) ; +#62582 = AXIS2_PLACEMENT_3D ( 'NONE', #54542, #60827, #10500 ) ; +#62583 = FACE_OUTER_BOUND ( 'NONE', #52750, .T. ) ; +#62584 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853733700, 61.25732391202370800, -28.20555803803030800 ) ) ; +#62585 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567156700, 41.24660241562189400, -28.20555803802996700 ) ) ; +#62586 = ADVANCED_FACE ( 'NONE', ( #55300 ), #53360, .F. ) ; +#62587 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62588 = EDGE_CURVE ( 'NONE', #76395, #12313, #38996, .T. ) ; +#62589 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 53.99926474563210400, -28.70555803803001600 ) ) ; +#62590 = CARTESIAN_POINT ( 'NONE', ( 6.592499485444489000E-015, 33.39610994602598000, -28.37519436813178700 ) ) ; +#62591 = EDGE_LOOP ( 'NONE', ( #79361, #57673, #28478, #66117 ) ) ; +#62592 = CARTESIAN_POINT ( 'NONE', ( -16.34768037227507500, 92.94768037227508700, -28.61432978906881200 ) ) ; +#62593 = CIRCLE ( 'NONE', #44588, 10.50000000000009600 ) ; +#62594 = AXIS2_PLACEMENT_3D ( 'NONE', #43475, #6238, #49706 ) ; +#62595 = ORIENTED_EDGE ( 'NONE', *, *, #30470, .T. ) ; +#62596 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174620600, 71.43945992495532900, -28.34042301926885800 ) ) ; +#62597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62598 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62599 = VERTEX_POINT ( 'NONE', #35783 ) ; +#62600 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 61.65075715145215400, -28.20555803803047800 ) ) ; +#62601 = CARTESIAN_POINT ( 'NONE', ( -6.418476861114186200E-014, 22.65857157145693900, -28.20555803802995200 ) ) ; +#62602 = VERTEX_POINT ( 'NONE', #54800 ) ; +#62603 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #874, #25669, #50636, #13429 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574859695400E-007, 0.0004053774948102836800 ), + .UNSPECIFIED. ) ; +#62604 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148344500, 44.59761904761938200, -28.70555803802996700 ) ) ; +#62605 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#62606 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056677100, 35.04999999999997600, -28.70555803802995200 ) ) ; +#62607 = ORIENTED_EDGE ( 'NONE', *, *, #27992, .T. ) ; +#62608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62609 = ADVANCED_FACE ( 'NONE', ( #69894 ), #20278, .T. ) ; +#62610 = CIRCLE ( 'NONE', #73193, 9.500000000000099500 ) ; +#62611 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#62612 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62613 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345436300, 70.27440177985819500, -28.29986836858018900 ) ) ; +#62614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62615 = VERTEX_POINT ( 'NONE', #67326 ) ; +#62616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62617 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504970400, 38.69228657120673600, -28.53891855579988900 ) ) ; +#62618 = EDGE_CURVE ( 'NONE', #4580, #5117, #24575, .T. ) ; +#62619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62620 = ORIENTED_EDGE ( 'NONE', *, *, #6032, .T. ) ; +#62621 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#62622 = CIRCLE ( 'NONE', #70623, 10.00000000000009200 ) ; +#62623 = EDGE_CURVE ( 'NONE', #69640, #5959, #10113, .T. ) ; +#62624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62625 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498184600, 61.60172914845357200, -28.24094723680244800 ) ) ; +#62626 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#62627 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#62628 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174760100, 60.16054007504465100, -28.34042301926881200 ) ) ; +#62629 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007100, 9.760897458958876200, -28.36630947932767900 ) ) ; +#62630 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 15.92318720225498100, -28.70555803802992800 ) ) ; +#62631 = EDGE_CURVE ( 'NONE', #7608, #2277, #76414, .T. ) ; +#62632 = ADVANCED_FACE ( 'NONE', ( #71881 ), #67960, .F. ) ; +#62633 = EDGE_CURVE ( 'NONE', #31009, #66196, #61985, .T. ) ; +#62634 = AXIS2_PLACEMENT_3D ( 'NONE', #53790, #4014, #28826 ) ; +#62635 = FACE_OUTER_BOUND ( 'NONE', #58874, .T. ) ; +#62636 = EDGE_CURVE ( 'NONE', #11374, #75158, #36803, .T. ) ; +#62637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62638 = ORIENTED_EDGE ( 'NONE', *, *, #11782, .F. ) ; +#62639 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 35.66666666666667100, 5.722645192245505700 ) ) ; +#62640 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62641 = AXIS2_PLACEMENT_3D ( 'NONE', #13935, #1660, #38914 ) ; +#62643 = ORIENTED_EDGE ( 'NONE', *, *, #29583, .F. ) ; +#62642 = EDGE_CURVE ( 'NONE', #21465, #24597, #47457, .T. ) ; +#62644 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#62645 = EDGE_CURVE ( 'NONE', #58643, #78730, #33040, .T. ) ; +#62646 = EDGE_CURVE ( 'NONE', #51055, #36778, #7597, .T. ) ; +#62648 = ORIENTED_EDGE ( 'NONE', *, *, #39300, .T. ) ; +#62647 = CARTESIAN_POINT ( 'NONE', ( 16.73347321811646900, 28.70564881207761900, -28.41114655922298100 ) ) ; +#62649 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30576, #12063, #18307, #61851 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721891215600E-007, 0.001076779618376913000 ), + .UNSPECIFIED. ) ; +#62650 = CONICAL_SURFACE ( 'NONE', #40698, 10.00000000000009400, 0.7853981633974447300 ) ; +#62651 = ORIENTED_EDGE ( 'NONE', *, *, #30494, .T. ) ; +#62652 = FACE_OUTER_BOUND ( 'NONE', #61536, .T. ) ; +#62653 = ORIENTED_EDGE ( 'NONE', *, *, #62067, .T. ) ; +#62654 = AXIS2_PLACEMENT_3D ( 'NONE', #58956, #21726, #65259 ) ; +#62655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62656 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71967, #3658, #53442, #16196 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.496446946337351300E-018, 0.001984222747274937100 ), + .UNSPECIFIED. ) ; +#62657 = CIRCLE ( 'NONE', #74623, 10.00000000000009400 ) ; +#62658 = ORIENTED_EDGE ( 'NONE', *, *, #64915, .F. ) ; +#62659 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#62660 = ORIENTED_EDGE ( 'NONE', *, *, #40219, .T. ) ; +#62661 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21791, #59032, #3254, #46760 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849964300, 0.0007596411030278604700 ), + .UNSPECIFIED. ) ; +#62662 = EDGE_CURVE ( 'NONE', #64333, #4680, #18589, .T. ) ; +#62663 = ORIENTED_EDGE ( 'NONE', *, *, #24493, .T. ) ; +#62664 = AXIS2_PLACEMENT_3D ( 'NONE', #68837, #56306, #544 ) ; +#62665 = AXIS2_PLACEMENT_3D ( 'NONE', #45247, #1749, #32511 ) ; +#62666 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#62667 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384618200, 80.79999999999968500, -28.55171188418406200 ) ) ; +#62668 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 90.36203212531317800, -28.38801640354855800 ) ) ; +#62669 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 7.000000000000008900, -12.20555803803000200 ) ) ; +#62670 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43117, #80410, #61921, #24639 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711450371900E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#62671 = CIRCLE ( 'NONE', #46653, 10.00000000000009200 ) ; +#62672 = ORIENTED_EDGE ( 'NONE', *, *, #61484, .T. ) ; +#62673 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 90.16054007504432400, -28.34042301926905700 ) ) ; +#62674 = FACE_OUTER_BOUND ( 'NONE', #1021, .T. ) ; +#62675 = CARTESIAN_POINT ( 'NONE', ( 13.10033444816027000, 80.79999999999967000, -28.20555803803023700 ) ) ; +#62676 = ORIENTED_EDGE ( 'NONE', *, *, #78263, .F. ) ; +#62677 = VERTEX_POINT ( 'NONE', #32172 ) ; +#62678 = EDGE_LOOP ( 'NONE', ( #78305, #61699, #50976, #7827 ) ) ; +#62679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62680 = CARTESIAN_POINT ( 'NONE', ( 16.18906703635483500, 7.619389812660781300, -28.43596454965340900 ) ) ; +#62681 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62682 = ORIENTED_EDGE ( 'NONE', *, *, #26191, .T. ) ; +#62683 = CIRCLE ( 'NONE', #77824, 10.00000000000009200 ) ; +#62684 = AXIS2_PLACEMENT_3D ( 'NONE', #56886, #19629, #63162 ) ; +#62685 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 10.17701665379185300, -28.20555803802992800 ) ) ; +#62686 = ORIENTED_EDGE ( 'NONE', *, *, #13671, .F. ) ; +#62687 = ADVANCED_FACE ( 'NONE', ( #22226 ), #34881, .T. ) ; +#62688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62689 = ORIENTED_EDGE ( 'NONE', *, *, #18767, .F. ) ; +#62690 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 60.16054007504464400, -28.34042301926880500 ) ) ; +#62691 = VERTEX_POINT ( 'NONE', #57187 ) ; +#62692 = AXIS2_PLACEMENT_3D ( 'NONE', #43692, #24702, #202 ) ; +#62693 = CARTESIAN_POINT ( 'NONE', ( 12.72730845928322400, 65.79999999999950000, -28.53979898350205600 ) ) ; +#62694 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 41.50000000000001400, 2.454695999814380200 ) ) ; +#62695 = ORIENTED_EDGE ( 'NONE', *, *, #45066, .F. ) ; +#62696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62697 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#62698 = EDGE_LOOP ( 'NONE', ( #3965, #42390, #5848 ) ) ; +#62699 = EDGE_CURVE ( 'NONE', #7519, #72417, #4112, .T. ) ; +#62700 = CONICAL_SURFACE ( 'NONE', #211, 10.00000000000009600, 0.7853981633974447300 ) ; +#62701 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62702 = AXIS2_PLACEMENT_3D ( 'NONE', #2486, #8736, #77031 ) ; +#62703 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59158, #15657, #65469, #28208 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694917099700E-007, 0.0008724363063896145100 ), + .UNSPECIFIED. ) ; +#62704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62705 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283600, 90.34267608797600200, -28.20555803802997700 ) ) ; +#62706 = CARTESIAN_POINT ( 'NONE', ( 19.97562125214849300, 101.5512425042965400, -19.84443304485031600 ) ) ; +#62707 = ADVANCED_FACE ( 'NONE', ( #3709 ), #49422, .F. ) ; +#62708 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.25489551879169900, -28.37193179497730400 ) ) ; +#62709 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526989700, 90.01262610361146700, -28.29936525552464100 ) ) ; +#62710 = AXIS2_PLACEMENT_3D ( 'NONE', #42401, #11440, #67455 ) ; +#62711 = CARTESIAN_POINT ( 'NONE', ( -13.10033444816066100, 80.79999999999999700, -28.20555803802987100 ) ) ; +#62712 = CARTESIAN_POINT ( 'NONE', ( 11.53374414036862600, 91.59999999999999400, -28.70555803803024400 ) ) ; +#62713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62714 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30608, #67853, #36822, #80354 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248703557600, 0.0009400395309963908900 ), + .UNSPECIFIED. ) ; +#62715 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#62716 = CARTESIAN_POINT ( 'NONE', ( -10.98575180313127200, 80.01994747561620600, -28.24986299608849900 ) ) ; +#62717 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#62718 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#62719 = AXIS2_PLACEMENT_3D ( 'NONE', #67344, #30117, #73604 ) ; +#62720 = CIRCLE ( 'NONE', #73212, 10.50000000000009600 ) ; +#62721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62722 = ADVANCED_FACE ( 'NONE', ( #51359 ), #16383, .F. ) ; +#62723 = ADVANCED_FACE ( 'NONE', ( #66029 ), #64085, .F. ) ; +#62724 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#62725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62726 = PLANE ( 'NONE', #68987 ) ; +#62727 = ORIENTED_EDGE ( 'NONE', *, *, #54257, .T. ) ; +#62728 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62729 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148348100, 13.09761904761937100, -28.70555803802992800 ) ) ; +#62730 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881200, 61.43383669612128300, -28.27375072930956200 ) ) ; +#62732 = VERTEX_POINT ( 'NONE', #38928 ) ; +#62731 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498184600, 41.60172914845357200, -28.24094723680244800 ) ) ; +#62733 = ADVANCED_FACE ( 'NONE', ( #38728 ), #30981, .T. ) ; +#62734 = FACE_OUTER_BOUND ( 'NONE', #17972, .T. ) ; +#62735 = ORIENTED_EDGE ( 'NONE', *, *, #71587, .T. ) ; +#62736 = CIRCLE ( 'NONE', #65914, 10.50000000000009600 ) ; +#62738 = EDGE_CURVE ( 'NONE', #59285, #42834, #70420, .T. ) ; +#62737 = ORIENTED_EDGE ( 'NONE', *, *, #78739, .F. ) ; +#62739 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432712300, 18.35339758437789800, -28.20555803803009500 ) ) ; +#62740 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 47.83333333333334300, -4.152999154772353500 ) ) ; +#62741 = EDGE_CURVE ( 'NONE', #71478, #22200, #47470, .T. ) ; +#62742 = ORIENTED_EDGE ( 'NONE', *, *, #67268, .F. ) ; +#62743 = CONICAL_SURFACE ( 'NONE', #20893, 10.50000000000009400, 0.7853981633974500600 ) ; +#62744 = FACE_OUTER_BOUND ( 'NONE', #39557, .T. ) ; +#62745 = ORIENTED_EDGE ( 'NONE', *, *, #4309, .T. ) ; +#62746 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62747 = ORIENTED_EDGE ( 'NONE', *, *, #30465, .T. ) ; +#62748 = ORIENTED_EDGE ( 'NONE', *, *, #54390, .T. ) ; +#62749 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 13.00000000000001600, -1.205558038030002800 ) ) ; +#62750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62751 = EDGE_CURVE ( 'NONE', #48534, #46914, #5671, .T. ) ; +#62752 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144800, 39.07141756547892400, -28.70555803802995200 ) ) ; +#62753 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62754 = CARTESIAN_POINT ( 'NONE', ( -2.428612866367529900E-014, 57.22261628933272700, -28.70555803802997700 ) ) ; +#62755 = CIRCLE ( 'NONE', #47134, 10.00000000000009400 ) ; +#62756 = VERTEX_POINT ( 'NONE', #57985 ) ; +#62757 = EDGE_CURVE ( 'NONE', #43614, #22304, #55962, .T. ) ; +#62758 = CONICAL_SURFACE ( 'NONE', #12260, 10.00000000000009400, 0.7853981633974447300 ) ; +#62759 = EDGE_CURVE ( 'NONE', #63007, #69303, #41509, .T. ) ; +#62760 = ORIENTED_EDGE ( 'NONE', *, *, #11970, .F. ) ; +#62761 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194995600, 56.76150692817510200, -28.68631150211658100 ) ) ; +#62762 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43100, #49334, #68137, #30890 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723127200, 0.0008252574424211023900 ), + .UNSPECIFIED. ) ; +#62763 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62764 = EDGE_LOOP ( 'NONE', ( #20214, #64716, #38643 ) ) ; +#62765 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 15.33333333333334600, 4.294441961970000500 ) ) ; +#62766 = ORIENTED_EDGE ( 'NONE', *, *, #7713, .F. ) ; +#62767 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62768 = ORIENTED_EDGE ( 'NONE', *, *, #70256, .T. ) ; +#62769 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#62770 = ORIENTED_EDGE ( 'NONE', *, *, #32395, .T. ) ; +#62771 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51956, #70758, #8726, #52231 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287230074800E-007, 0.0004318378175233004900 ), + .UNSPECIFIED. ) ; +#62772 = VECTOR ( 'NONE', #9093, 1000.000000000000000 ) ; +#62773 = AXIS2_PLACEMENT_3D ( 'NONE', #67428, #30201, #73693 ) ; +#62774 = EDGE_CURVE ( 'NONE', #43518, #74194, #18324, .T. ) ; +#62775 = EDGE_CURVE ( 'NONE', #52657, #26910, #32901, .T. ) ; +#62776 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432837500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#62777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62778 = EDGE_CURVE ( 'NONE', #66045, #359, #27076, .T. ) ; +#62779 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 62.97376207875058900, -28.70555803802997700 ) ) ; +#62780 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.44142842854296700, -28.20555803802994200 ) ) ; +#62781 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 48.12623792124937700, -28.70555803802996700 ) ) ; +#62782 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5781, #61825, #24548, #68064 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871337448200E-007, 0.0002930369617398659000 ), + .UNSPECIFIED. ) ; +#62783 = ORIENTED_EDGE ( 'NONE', *, *, #63674, .T. ) ; +#62784 = AXIS2_PLACEMENT_3D ( 'NONE', #30942, #74460, #37156 ) ; +#62785 = CARTESIAN_POINT ( 'NONE', ( -11.03592035693653300, 10.09789380924873100, -28.25343951603342800 ) ) ; +#62786 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282700, 9.746602415621900700, -28.20555803802992800 ) ) ; +#62787 = EDGE_LOOP ( 'NONE', ( #80213, #71636, #76405, #52169 ) ) ; +#62788 = CIRCLE ( 'NONE', #34060, 10.50000000000009600 ) ; +#62789 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#62790 = CARTESIAN_POINT ( 'NONE', ( 3.681656868178712400E-014, 83.42856308690583900, -28.36981695106786800 ) ) ; +#62791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62792 = CARTESIAN_POINT ( 'NONE', ( 17.90233405035085200, 30.86492161058562500, -28.27580420063967300 ) ) ; +#62793 = AXIS2_PLACEMENT_3D ( 'NONE', #76207, #45161, #32699 ) ; +#62794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62795 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50190, #6701, #68991, #31739 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690662334100E-007, 0.0007331055842534807300 ), + .UNSPECIFIED. ) ; +#62796 = AXIS2_PLACEMENT_3D ( 'NONE', #46321, #77106, #52597 ) ; +#62797 = ADVANCED_FACE ( 'NONE', ( #78675 ), #12476, .F. ) ; +#62798 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62800 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#62799 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000005200, 12.49926474563218900, -28.70555803802994200 ) ) ; +#62801 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62802 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 18.83333333333333900, -9.205558038030003900 ) ) ; +#62803 = CONICAL_SURFACE ( 'NONE', #35078, 10.00000000000009400, 0.7853981633974447300 ) ; +#62804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62805 = EDGE_LOOP ( 'NONE', ( #14128, #14073, #25373 ) ) ; +#62806 = ORIENTED_EDGE ( 'NONE', *, *, #55000, .F. ) ; +#62807 = CONICAL_SURFACE ( 'NONE', #70792, 10.50000000000009600, 0.7853981633974500600 ) ; +#62808 = CARTESIAN_POINT ( 'NONE', ( 15.08090515035404300, 9.959547424822977400, -28.70555803803000900 ) ) ; +#62809 = ADVANCED_FACE ( 'NONE', ( #14420 ), #60178, .T. ) ; +#62810 = AXIS2_PLACEMENT_3D ( 'NONE', #48881, #61458, #5409 ) ; +#62811 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62812 = EDGE_CURVE ( 'NONE', #24338, #30160, #12606, .T. ) ; +#62813 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#62814 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#62815 = ORIENTED_EDGE ( 'NONE', *, *, #30892, .T. ) ; +#62816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31544, #6768, #44257, #7030 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210959900, 0.001517199873936111700 ), + .UNSPECIFIED. ) ; +#62817 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404400, 17.92298334620739200, -28.20555803802993500 ) ) ; +#62818 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62819 = FACE_OUTER_BOUND ( 'NONE', #47420, .T. ) ; +#62820 = CARTESIAN_POINT ( 'NONE', ( 18.01482966498113200, 17.99827085154634800, -28.24094723680267200 ) ) ; +#62821 = FACE_OUTER_BOUND ( 'NONE', #44578, .T. ) ; +#62822 = ORIENTED_EDGE ( 'NONE', *, *, #25090, .F. ) ; +#62823 = ADVANCED_FACE ( 'NONE', ( #1753 ), #27816, .T. ) ; +#62824 = EDGE_CURVE ( 'NONE', #33227, #39864, #78940, .T. ) ; +#62825 = CIRCLE ( 'NONE', #58878, 10.50000000000009200 ) ; +#62826 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#62828 = ORIENTED_EDGE ( 'NONE', *, *, #43975, .T. ) ; +#62827 = CARTESIAN_POINT ( 'NONE', ( -8.899882735204613500, 24.54999999999999700, -28.53808257741957600 ) ) ; +#62829 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#62830 = ORIENTED_EDGE ( 'NONE', *, *, #39378, .F. ) ; +#62831 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492517100, 10.52620220503753700, -28.70555803803025800 ) ) ; +#62832 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655456400, 10.17701665379220800, -28.20555803802993500 ) ) ; +#62833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62834 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654557500, 90.27440177985818100, -28.29986836858018500 ) ) ; +#62835 = CIRCLE ( 'NONE', #47242, 9.500000000000097700 ) ; +#62836 = ADVANCED_FACE ( 'NONE', ( #62121 ), #10526, .T. ) ; +#62837 = CIRCLE ( 'NONE', #55970, 10.00000000000009200 ) ; +#62838 = ORIENTED_EDGE ( 'NONE', *, *, #1253, .T. ) ; +#62839 = AXIS2_PLACEMENT_3D ( 'NONE', #47735, #72539, #10507 ) ; +#62840 = CARTESIAN_POINT ( 'NONE', ( 17.24584322970066800, 80.70681957915861900, -28.45010557050480000 ) ) ; +#62841 = ORIENTED_EDGE ( 'NONE', *, *, #15466, .F. ) ; +#62842 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#62843 = ORIENTED_EDGE ( 'NONE', *, *, #47764, .F. ) ; +#62844 = VERTEX_POINT ( 'NONE', #46502 ) ; +#62845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62846 = ORIENTED_EDGE ( 'NONE', *, *, #16679, .T. ) ; +#62847 = ADVANCED_FACE ( 'NONE', ( #27084 ), #58192, .F. ) ; +#62848 = FACE_OUTER_BOUND ( 'NONE', #55793, .T. ) ; +#62849 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 62.50000000000001400, -4.865812075874393000 ) ) ; +#62850 = ORIENTED_EDGE ( 'NONE', *, *, #16902, .T. ) ; +#62851 = AXIS2_PLACEMENT_3D ( 'NONE', #43416, #55929, #37157 ) ; +#62852 = EDGE_LOOP ( 'NONE', ( #40393, #12117, #52317 ) ) ; +#62853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62854 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306339300, 10.09789380924864600, -28.25343951603353100 ) ) ; +#62855 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 27.50000000000000400, -7.061964498581016200 ) ) ; +#62856 = VERTEX_POINT ( 'NONE', #46783 ) ; +#62857 = FACE_OUTER_BOUND ( 'NONE', #19023, .T. ) ; +#62858 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62859 = CARTESIAN_POINT ( 'NONE', ( -12.21669353480418800, 70.79999999999998300, -28.32841359973436500 ) ) ; +#62860 = EDGE_CURVE ( 'NONE', #27421, #77015, #74758, .T. ) ; +#62861 = VERTEX_POINT ( 'NONE', #71578 ) ; +#62862 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#62863 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62864 = CIRCLE ( 'NONE', #13718, 10.00000000000009400 ) ; +#62865 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 64.83333333333334300, 1.741883078712340300 ) ) ; +#62866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62867 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62868 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62869 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567155000, 30.74660241562189700, -28.20555803802995200 ) ) ; +#62870 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62871 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71786, #28301, #16021, #65801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249689600, 0.0007802304471361598300 ), + .UNSPECIFIED. ) ; +#62872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62873 = EDGE_CURVE ( 'NONE', #33070, #17606, #64485, .T. ) ; +#62874 = EDGE_CURVE ( 'NONE', #73336, #14994, #76687, .T. ) ; +#62875 = FACE_OUTER_BOUND ( 'NONE', #38253, .T. ) ; +#62876 = PLANE ( 'NONE', #51390 ) ; +#62877 = CARTESIAN_POINT ( 'NONE', ( -17.04027359854958600, 28.72437813624630100, -28.30310527599299400 ) ) ; +#62878 = FACE_OUTER_BOUND ( 'NONE', #18508, .T. ) ; +#62879 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754700, 40.89456479767149900, -28.70555803802996700 ) ) ; +#62880 = CARTESIAN_POINT ( 'NONE', ( -18.01246063274466300, 18.30622828441264400, -28.24172590004346600 ) ) ; +#62881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62882 = ORIENTED_EDGE ( 'NONE', *, *, #62391, .F. ) ; +#62884 = ORIENTED_EDGE ( 'NONE', *, *, #62174, .T. ) ; +#62883 = CARTESIAN_POINT ( 'NONE', ( 17.22125914545566200, 39.16476764525110400, -28.30311733712047200 ) ) ; +#62885 = FACE_OUTER_BOUND ( 'NONE', #79933, .T. ) ; +#62886 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62887 = AXIS2_PLACEMENT_3D ( 'NONE', #64515, #27233, #70715 ) ; +#62888 = EDGE_CURVE ( 'NONE', #40425, #3351, #43577, .T. ) ; +#62889 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 70.13716795162658000, -28.48697406221667800 ) ) ; +#62890 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77550, #40272, #46493, #9255 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799625124100E-007, 0.0005050252131287587700 ), + .UNSPECIFIED. ) ; +#62891 = EDGE_CURVE ( 'NONE', #53681, #2291, #49942, .T. ) ; +#62892 = EDGE_LOOP ( 'NONE', ( #10987, #51597, #61092, #50839, #1833, #32935, #21110 ) ) ; +#62893 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484971600, 72.31032580520964400, -28.59353418718925600 ) ) ; +#62894 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62895 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274715200, 24.54999999999997200, -28.20555803802994200 ) ) ; +#62896 = EDGE_CURVE ( 'NONE', #2862, #70514, #35556, .T. ) ; +#62897 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 28.66349705304866500, -28.30782889147480600 ) ) ; +#62898 = CARTESIAN_POINT ( 'NONE', ( -3.523452819221323900, 9.410658115921107100, -28.68817749111424900 ) ) ; +#62899 = FACE_OUTER_BOUND ( 'NONE', #2834, .T. ) ; +#62900 = AXIS2_PLACEMENT_3D ( 'NONE', #69994, #76257, #32477 ) ; +#62901 = FACE_OUTER_BOUND ( 'NONE', #75329, .T. ) ; +#62902 = ORIENTED_EDGE ( 'NONE', *, *, #72438, .T. ) ; +#62903 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 67.83333333333337100, -3.349151577478984600 ) ) ; +#62904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62905 = CARTESIAN_POINT ( 'NONE', ( -9.277608394786787100, 50.55000000000005400, -28.70555803802997400 ) ) ; +#62906 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64495, #27221, #33447, #76969 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974184993900, 0.001517199873936111700 ), + .UNSPECIFIED. ) ; +#62907 = FACE_OUTER_BOUND ( 'NONE', #73004, .T. ) ; +#62908 = ORIENTED_EDGE ( 'NONE', *, *, #67526, .T. ) ; +#62909 = ORIENTED_EDGE ( 'NONE', *, *, #13419, .T. ) ; +#62910 = AXIS2_PLACEMENT_3D ( 'NONE', #4410, #47905, #10679 ) ; +#62911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62912 = AXIS2_PLACEMENT_3D ( 'NONE', #37940, #690, #44161 ) ; +#62913 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451075600, 9.940690926013799000, -28.35186440610870300 ) ) ; +#62914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62915 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5853, #36831, #43087, #49320 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284200900, 0.0006028148015512262400 ), + .UNSPECIFIED. ) ; +#62916 = FACE_OUTER_BOUND ( 'NONE', #40414, .T. ) ; +#62917 = FACE_OUTER_BOUND ( 'NONE', #36280, .T. ) ; +#62918 = ORIENTED_EDGE ( 'NONE', *, *, #32476, .F. ) ; +#62919 = EDGE_LOOP ( 'NONE', ( #43601, #8119, #68895, #21634 ) ) ; +#62920 = ADVANCED_FACE ( 'NONE', ( #80600 ), #56236, .T. ) ; +#62921 = ORIENTED_EDGE ( 'NONE', *, *, #46830, .F. ) ; +#62922 = ORIENTED_EDGE ( 'NONE', *, *, #44468, .T. ) ; +#62923 = ORIENTED_EDGE ( 'NONE', *, *, #25115, .F. ) ; +#62924 = ADVANCED_FACE ( 'NONE', ( #29071 ), #72406, .T. ) ; +#62925 = CIRCLE ( 'NONE', #46900, 10.00000000000009200 ) ; +#62926 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 33.50000000000001400, -7.061964498581022400 ) ) ; +#62927 = CARTESIAN_POINT ( 'NONE', ( 5.922252789298227100, 55.79999999999951400, -28.70555803803030800 ) ) ; +#62928 = CONICAL_SURFACE ( 'NONE', #6634, 10.50000000000009600, 0.7853981633974518300 ) ; +#62929 = AXIS2_PLACEMENT_3D ( 'NONE', #29433, #72921, #35655 ) ; +#62930 = EDGE_LOOP ( 'NONE', ( #17523, #53277, #68195, #44096 ) ) ; +#62931 = EDGE_CURVE ( 'NONE', #34797, #34010, #25119, .T. ) ; +#62932 = CARTESIAN_POINT ( 'NONE', ( -15.86757472215855800, 9.011090582793022100, -28.65663190915572400 ) ) ; +#62933 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567154100, 20.24660241562189000, -28.20555803802994200 ) ) ; +#62934 = ADVANCED_FACE ( 'NONE', ( #72812 ), #70840, .F. ) ; +#62935 = ORIENTED_EDGE ( 'NONE', *, *, #21079, .F. ) ; +#62936 = FACE_OUTER_BOUND ( 'NONE', #53370, .T. ) ; +#62937 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356100, 70.79999999999968500, -28.55171188418412200 ) ) ; +#62938 = EDGE_CURVE ( 'NONE', #25145, #10779, #6604, .T. ) ; +#62939 = ORIENTED_EDGE ( 'NONE', *, *, #51382, .T. ) ; +#62940 = FACE_OUTER_BOUND ( 'NONE', #19846, .T. ) ; +#62941 = AXIS2_PLACEMENT_3D ( 'NONE', #34502, #40733, #21979 ) ; +#62942 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62943 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.73796787468680600, -28.38801640354855100 ) ) ; +#62944 = ORIENTED_EDGE ( 'NONE', *, *, #61760, .F. ) ; +#62945 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80375, #74138, #5858, #49326 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004721052600E-007, 0.0004089065559708683100 ), + .UNSPECIFIED. ) ; +#62946 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372565800, 57.93535825203924400, -28.53896444442201400 ) ) ; +#62947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 23.13556610137282000, -28.54207364681941400 ) ) ; +#62948 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 4.833333333333341900, 9.794441961969999600 ) ) ; +#62949 = AXIS2_PLACEMENT_3D ( 'NONE', #17189, #4661, #23441 ) ; +#62950 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526977000, 51.58737389638849900, -28.29936525552456300 ) ) ; +#62951 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#62952 = FACE_OUTER_BOUND ( 'NONE', #40332, .T. ) ; +#62953 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ; +#62954 = CONICAL_SURFACE ( 'NONE', #29566, 10.00000000000009200, 0.7853981633974447300 ) ; +#62955 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488136200, 89.60439022488338900, -28.70555803802997700 ) ) ; +#62956 = CARTESIAN_POINT ( 'NONE', ( 17.51708091317565800, 4.965839902322463800, -27.37315423252758600 ) ) ; +#62957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62958 = CARTESIAN_POINT ( 'NONE', ( 17.37150777124371400, 61.43250300240198700, -28.25053031809502000 ) ) ; +#62959 = VERTEX_POINT ( 'NONE', #10642 ) ; +#62960 = FACE_OUTER_BOUND ( 'NONE', #2175, .T. ) ; +#62961 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#62962 = AXIS2_PLACEMENT_3D ( 'NONE', #54451, #17210, #60737 ) ; +#62963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62964 = VERTEX_POINT ( 'NONE', #23150 ) ; +#62965 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 36.94142842854307000, -28.20555803802995200 ) ) ; +#62966 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999984900, 17.81066373133488400, -28.53923937255180800 ) ) ; +#62967 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#62968 = CONICAL_SURFACE ( 'NONE', #34302, 10.00000000000009400, 0.7853981633974447300 ) ; +#62969 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62970 = FACE_OUTER_BOUND ( 'NONE', #51703, .T. ) ; +#62971 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 39.33333333333333600, -5.535685056952199400 ) ) ; +#62972 = ORIENTED_EDGE ( 'NONE', *, *, #39993, .T. ) ; +#62973 = CARTESIAN_POINT ( 'NONE', ( -8.272691540716726500, 55.79999999999999700, -28.53979898350160100 ) ) ; +#62974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62975 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849337000, 39.27966528189954000, -28.30868034705250100 ) ) ; +#62976 = CARTESIAN_POINT ( 'NONE', ( 9.487410011450800000, 90.12140959735964400, -28.55996453402252700 ) ) ; +#62977 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 47.44142842854297000, -28.20555803802996700 ) ) ; +#62978 = CARTESIAN_POINT ( 'NONE', ( 23.43599753889472100, 95.81799876944798200, -24.10539221927638600 ) ) ; +#62979 = ORIENTED_EDGE ( 'NONE', *, *, #79221, .F. ) ; +#62980 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310457600, 28.60230989102909800, -28.61774594594333400 ) ) ; +#62981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#62982 = CARTESIAN_POINT ( 'NONE', ( 3.556183125752454500E-014, 53.65857157145704500, -28.20555803802997700 ) ) ; +#62983 = CARTESIAN_POINT ( 'NONE', ( 17.04409106865851300, 9.687272620894162900, -28.28853693900653000 ) ) ; +#62984 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000408600, 67.94142842854304800, -28.20555803803030800 ) ) ; +#62985 = FACE_OUTER_BOUND ( 'NONE', #66802, .T. ) ; +#62986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62987 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#62988 = EDGE_LOOP ( 'NONE', ( #12669, #46548, #54192, #65358 ) ) ; +#62989 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#62990 = EDGE_LOOP ( 'NONE', ( #40260, #7106, #66414 ) ) ; +#62991 = ORIENTED_EDGE ( 'NONE', *, *, #35953, .F. ) ; +#62992 = ORIENTED_EDGE ( 'NONE', *, *, #22441, .F. ) ; +#62994 = EDGE_CURVE ( 'NONE', #25034, #9360, #21090, .T. ) ; +#62993 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27774, #59021, #77782, #40517 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972908985886000E-007, 0.0005865296644893962500 ), + .UNSPECIFIED. ) ; +#62995 = ORIENTED_EDGE ( 'NONE', *, *, #44003, .T. ) ; +#62996 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#62997 = FACE_OUTER_BOUND ( 'NONE', #25853, .T. ) ; +#62998 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -49.81214711292819400, 8.794441961969976500 ) ) ; +#62999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63000 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074373200, 27.81967837323414000, -28.55467576046955700 ) ) ; +#63001 = ORIENTED_EDGE ( 'NONE', *, *, #72438, .F. ) ; +#63002 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 41.43650294695131500, -28.30782889147482400 ) ) ; +#63003 = ADVANCED_FACE ( 'NONE', ( #8547 ), #21231, .T. ) ; +#63004 = EDGE_CURVE ( 'NONE', #40000, #75947, #37729, .T. ) ; +#63005 = CONICAL_SURFACE ( 'NONE', #5962, 10.00000000000009600, 0.7853981633974482800 ) ; +#63006 = AXIS2_PLACEMENT_3D ( 'NONE', #25569, #69060, #31814 ) ; +#63007 = VERTEX_POINT ( 'NONE', #17158 ) ; +#63008 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 45.66666666666667900, 4.294441961969993400 ) ) ; +#63009 = ORIENTED_EDGE ( 'NONE', *, *, #20477, .T. ) ; +#63010 = CONICAL_SURFACE ( 'NONE', #10482, 10.50000000000009200, 0.7853981633974482800 ) ; +#63011 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#63012 = CIRCLE ( 'NONE', #66302, 9.500000000000099500 ) ; +#63013 = ADVANCED_FACE ( 'NONE', ( #23170 ), #52310, .F. ) ; +#63014 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 10.83333333333335000, -2.545304000185615800 ) ) ; +#63015 = AXIS2_PLACEMENT_3D ( 'NONE', #61019, #23754, #67252 ) ; +#63016 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344056900, 28.42298334620768300, -28.20555803802994200 ) ) ; +#63017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63019 = ORIENTED_EDGE ( 'NONE', *, *, #42692, .T. ) ; +#63018 = EDGE_CURVE ( 'NONE', #53406, #27733, #68888, .T. ) ; +#63020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14439, #51649, #20698, #64236 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799625124100E-007, 0.0005050252131284528000 ), + .UNSPECIFIED. ) ; +#63021 = EDGE_CURVE ( 'NONE', #14568, #38741, #41641, .T. ) ; +#63022 = AXIS2_PLACEMENT_3D ( 'NONE', #48074, #10857, #54348 ) ; +#63023 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567155400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#63024 = CIRCLE ( 'NONE', #69829, 10.00000000000009600 ) ; +#63025 = ORIENTED_EDGE ( 'NONE', *, *, #31954, .F. ) ; +#63026 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.61077422949657700, -28.37255355648634800 ) ) ; +#63027 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#63028 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 13.16666666666667300, -4.152999154772358800 ) ) ; +#63029 = AXIS2_PLACEMENT_3D ( 'NONE', #20642, #64180, #26898 ) ; +#63030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63031 = VERTEX_POINT ( 'NONE', #4901 ) ; +#63032 = EDGE_CURVE ( 'NONE', #65707, #6774, #54294, .T. ) ; +#63033 = FACE_OUTER_BOUND ( 'NONE', #16999, .T. ) ; +#63034 = AXIS2_PLACEMENT_3D ( 'NONE', #64149, #45568, #8327 ) ; +#63035 = AXIS2_PLACEMENT_3D ( 'NONE', #53728, #22737, #66265 ) ; +#63036 = VERTEX_POINT ( 'NONE', #42413 ) ; +#63037 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#63038 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747327900, 18.13131911501848800, -28.51286550264574200 ) ) ; +#63039 = ADVANCED_FACE ( 'NONE', ( #39693 ), #50353, .F. ) ; +#63040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19073, #37825, #56603, #19345 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553009007500E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#63041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63042 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844501200, 66.13383585008146800, -28.37247596307072000 ) ) ; +#63043 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63044 = CARTESIAN_POINT ( 'NONE', ( 15.72819242488207300, 93.05639898418564800, -28.59922136427082500 ) ) ; +#63045 = CIRCLE ( 'NONE', #51522, 10.50000000000009200 ) ; +#63046 = ORIENTED_EDGE ( 'NONE', *, *, #37418, .F. ) ; +#63047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63048 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467678100, 19.76893971292313200, -28.57333386111099900 ) ) ; +#63049 = AXIS2_PLACEMENT_3D ( 'NONE', #65395, #77862, #40584 ) ; +#63050 = CARTESIAN_POINT ( 'NONE', ( -19.86435495142842800, 0.2709413477410213500, -21.03651726247471000 ) ) ; +#63051 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 60.51916201875669500, -28.45106778992438000 ) ) ; +#63052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63053 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819198200, 61.65075715145310700, -28.20555803802997700 ) ) ; +#63054 = EDGE_LOOP ( 'NONE', ( #54636, #75038, #63065, #46135 ) ) ; +#63055 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530300, 35.04999999999999700, -28.20555803802995200 ) ) ; +#63056 = CONICAL_SURFACE ( 'NONE', #71817, 10.50000000000009600, 0.7853981633974500600 ) ; +#63057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63058 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844490800, 75.79999999999982700, -28.20555803803014400 ) ) ; +#63059 = FACE_OUTER_BOUND ( 'NONE', #52640, .T. ) ; +#63060 = AXIS2_PLACEMENT_3D ( 'NONE', #6196, #68742, #25240 ) ; +#63061 = ORIENTED_EDGE ( 'NONE', *, *, #70828, .T. ) ; +#63062 = ORIENTED_EDGE ( 'NONE', *, *, #67627, .T. ) ; +#63063 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 16.66666666666668200, 5.722645192245505700 ) ) ; +#63064 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#63065 = ORIENTED_EDGE ( 'NONE', *, *, #53802, .F. ) ; +#63066 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63067 = VERTEX_POINT ( 'NONE', #61234 ) ; +#63068 = ORIENTED_EDGE ( 'NONE', *, *, #29446, .F. ) ; +#63069 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77004, #70743, #27264, #39736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108371400, 0.0006040461757763913900 ), + .UNSPECIFIED. ) ; +#63070 = VERTEX_POINT ( 'NONE', #23960 ) ; +#63071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63072 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63073 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001600, 53.43454006867175800, -28.70555803802999500 ) ) ; +#63074 = AXIS2_PLACEMENT_3D ( 'NONE', #45663, #8425, #51924 ) ; +#63075 = ORIENTED_EDGE ( 'NONE', *, *, #74437, .T. ) ; +#63076 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63077 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701800, 23.61903418172678900, -28.69431509262337700 ) ) ; +#63078 = EDGE_CURVE ( 'NONE', #3316, #35675, #2682, .T. ) ; +#63079 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877852800, 39.57332680091207100, -28.37233769390155700 ) ) ; +#63080 = ORIENTED_EDGE ( 'NONE', *, *, #51520, .F. ) ; +#63081 = CIRCLE ( 'NONE', #9470, 9.500000000000095900 ) ; +#63082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63083 = CARTESIAN_POINT ( 'NONE', ( -4.180827656327562800, 9.542716366279794500, -28.36017162544769100 ) ) ; +#63084 = AXIS2_PLACEMENT_3D ( 'NONE', #3060, #46561, #9319 ) ; +#63085 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.93250300240229200, -28.20555803802996700 ) ) ; +#63086 = ORIENTED_EDGE ( 'NONE', *, *, #37592, .F. ) ; +#63087 = VERTEX_POINT ( 'NONE', #36437 ) ; +#63088 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857289600, 26.42318720225497900, -28.70555803802994200 ) ) ; +#63089 = CIRCLE ( 'NONE', #12561, 10.00000000000009200 ) ; +#63090 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#63091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63092 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999899600, 70.79999999999991200, -28.70555803802997700 ) ) ; +#63093 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63094 = ORIENTED_EDGE ( 'NONE', *, *, #25237, .T. ) ; +#63095 = ADVANCED_FACE ( 'NONE', ( #19251 ), #740, .T. ) ; +#63096 = EDGE_CURVE ( 'NONE', #43443, #12400, #6595, .T. ) ; +#63097 = CARTESIAN_POINT ( 'NONE', ( 4.957239735864594500, 65.79999999999968500, -28.53819074160713500 ) ) ; +#63098 = CONICAL_SURFACE ( 'NONE', #32778, 10.50000000000009200, 0.7853981633974482800 ) ; +#63100 = VERTEX_POINT ( 'NONE', #30491 ) ; +#63099 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042503900, 32.09027028261000700, -28.70555803802998800 ) ) ; +#63101 = EDGE_CURVE ( 'NONE', #38012, #36817, #72939, .T. ) ; +#63102 = VERTEX_POINT ( 'NONE', #80237 ) ; +#63103 = CARTESIAN_POINT ( 'NONE', ( 16.62383408584591700, 9.214609942514096400, -28.57283550572520900 ) ) ; +#63104 = ADVANCED_FACE ( 'NONE', ( #33861 ), #48410, .T. ) ; +#63105 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 60.33333333333333600, 3.124568980892187500 ) ) ; +#63106 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 60.16749699759768800, -28.20555803802997700 ) ) ; +#63107 = EDGE_CURVE ( 'NONE', #68238, #51876, #65023, .T. ) ; +#63108 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71667, #34392, #40634, #3364 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775788680000, 0.0009605145132136789000 ), + .UNSPECIFIED. ) ; +#63109 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274713600, 14.05000000000000800, -28.20555803802992800 ) ) ; +#63110 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 25.33333333333334600, 5.722645192245503900 ) ) ; +#63111 = EDGE_CURVE ( 'NONE', #31065, #38410, #17308, .T. ) ; +#63112 = AXIS2_PLACEMENT_3D ( 'NONE', #32706, #76218, #38938 ) ; +#63113 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#63114 = CONICAL_SURFACE ( 'NONE', #56204, 10.50000000000009600, 0.7853981633974518300 ) ; +#63115 = ADVANCED_FACE ( 'NONE', ( #45513 ), #63056, .F. ) ; +#63116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#63117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63118 = ADVANCED_FACE ( 'NONE', ( #66957 ), #29992, .T. ) ; +#63119 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 62.66666666666667100, -6.705558038030000400 ) ) ; +#63120 = ORIENTED_EDGE ( 'NONE', *, *, #79487, .F. ) ; +#63121 = ORIENTED_EDGE ( 'NONE', *, *, #4708, .F. ) ; +#63122 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544011800, 71.52472935029899800, -28.39317435246128700 ) ) ; +#63123 = AXIS2_PLACEMENT_3D ( 'NONE', #34920, #78439, #41154 ) ; +#63124 = EDGE_CURVE ( 'NONE', #43734, #51916, #58463, .T. ) ; +#63125 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63126 = EDGE_CURVE ( 'NONE', #60180, #76544, #43956, .T. ) ; +#63127 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#63128 = EDGE_CURVE ( 'NONE', #52422, #46777, #29575, .T. ) ; +#63129 = ADVANCED_FACE ( 'NONE', ( #31911 ), #68539, .T. ) ; +#63130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63131 = CARTESIAN_POINT ( 'NONE', ( -4.035920356936534500, 10.09789380924872900, -28.25343951603342800 ) ) ; +#63132 = CONICAL_SURFACE ( 'NONE', #76434, 10.50000000000009600, 0.7853981633974500600 ) ; +#63133 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63134 = CONICAL_SURFACE ( 'NONE', #5244, 10.00000000000009400, 0.7853981633974447300 ) ; +#63135 = ORIENTED_EDGE ( 'NONE', *, *, #39265, .F. ) ; +#63136 = ORIENTED_EDGE ( 'NONE', *, *, #71587, .F. ) ; +#63137 = AXIS2_PLACEMENT_3D ( 'NONE', #5543, #36532, #42784 ) ; +#63138 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 70.16054007504466500, -28.34042301926880800 ) ) ; +#63139 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 51.25732391202397800, -28.20555803802997700 ) ) ; +#63140 = ORIENTED_EDGE ( 'NONE', *, *, #60630, .T. ) ; +#63141 = FACE_OUTER_BOUND ( 'NONE', #5928, .T. ) ; +#63142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63143 = ORIENTED_EDGE ( 'NONE', *, *, #52730, .F. ) ; +#63144 = EDGE_LOOP ( 'NONE', ( #80746, #31055, #1983, #28024 ) ) ; +#63145 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510923400, 30.62856921007281800, -28.37063977681170000 ) ) ; +#63146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63147 = ORIENTED_EDGE ( 'NONE', *, *, #52734, .F. ) ; +#63148 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63149 = EDGE_LOOP ( 'NONE', ( #11738, #78669, #79003, #38336 ) ) ; +#63150 = ORIENTED_EDGE ( 'NONE', *, *, #13380, .F. ) ; +#63151 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 67.46443389862682200, -28.54207364681979400 ) ) ; +#63152 = VERTEX_POINT ( 'NONE', #43736 ) ; +#63153 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846326100, 80.79999999999991200, -28.55171188418386000 ) ) ; +#63154 = EDGE_CURVE ( 'NONE', #21775, #3005, #15081, .T. ) ; +#63155 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63156 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 47.44142842854307000, -28.20555803802996700 ) ) ; +#63157 = AXIS2_PLACEMENT_3D ( 'NONE', #30941, #61956, #74458 ) ; +#63158 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 18.37705528805141600, -28.20555803802992800 ) ) ; +#63159 = AXIS2_PLACEMENT_3D ( 'NONE', #34999, #16218, #53474 ) ; +#63160 = VERTEX_POINT ( 'NONE', #68795 ) ; +#63161 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841389500, 39.16349705304865800, -28.30782889147481300 ) ) ; +#63162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63163 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#63164 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948433900, 51.01872124563905700, -28.53757464917594400 ) ) ; +#63165 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143971200, 55.15853008474739700, -28.52629299565627000 ) ) ; +#63166 = CONICAL_SURFACE ( 'NONE', #44818, 10.50000000000009600, 0.7853981633974500600 ) ; +#63167 = EDGE_LOOP ( 'NONE', ( #40532, #37043, #12531, #80298 ) ) ; +#63168 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 66.16666666666670000, -3.349151577478988200 ) ) ; +#63169 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466682600, 31.29130857014966700, -28.37223374938521700 ) ) ; +#63170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63171 = ORIENTED_EDGE ( 'NONE', *, *, #60865, .F. ) ; +#63172 = ORIENTED_EDGE ( 'NONE', *, *, #35153, .F. ) ; +#63173 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 57.94142842854297700, -28.20555803802997700 ) ) ; +#63174 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#63175 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472517700, 13.73212903577553800, -28.37244029424789500 ) ) ; +#63176 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7112, #13410, #56908, #19645 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.461806915638450700E-016, 0.001179148174663249200 ), + .UNSPECIFIED. ) ; +#63177 = CONICAL_SURFACE ( 'NONE', #47907, 10.50000000000009600, 0.7853981633974518300 ) ; +#63178 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732779900, 71.93585231025903700, -28.38420446581295000 ) ) ; +#63179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63180 = AXIS2_PLACEMENT_3D ( 'NONE', #5883, #12137, #43115 ) ; +#63181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63182 = ORIENTED_EDGE ( 'NONE', *, *, #66684, .F. ) ; +#63183 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.66749699759768100, -28.20555803802996700 ) ) ; +#63184 = ORIENTED_EDGE ( 'NONE', *, *, #60162, .F. ) ; +#63185 = AXIS2_PLACEMENT_3D ( 'NONE', #17136, #60667, #23388 ) ; +#63186 = CARTESIAN_POINT ( 'NONE', ( 3.639502927797198400, 20.43250300240229600, -28.25438406275897000 ) ) ; +#63187 = CIRCLE ( 'NONE', #62466, 10.00000000000009200 ) ; +#63188 = ORIENTED_EDGE ( 'NONE', *, *, #38824, .T. ) ; +#63189 = EDGE_CURVE ( 'NONE', #17621, #70061, #599, .T. ) ; +#63190 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.16749699759768800, -28.20555803802997700 ) ) ; +#63191 = AXIS2_PLACEMENT_3D ( 'NONE', #55671, #24693, #68197 ) ; +#63192 = EDGE_LOOP ( 'NONE', ( #22871, #22372, #53447, #59246 ) ) ; +#63193 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#63194 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 31.33333333333334600, 2.794441961969998300 ) ) ; +#63195 = CARTESIAN_POINT ( 'NONE', ( -17.41531457165532600, 61.18368596002118700, -28.40988208712491300 ) ) ; +#63196 = AXIS2_PLACEMENT_3D ( 'NONE', #33284, #45753, #27052 ) ; +#63197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63198 = ADVANCED_FACE ( 'NONE', ( #46455 ), #69063, .T. ) ; +#63199 = AXIS2_PLACEMENT_3D ( 'NONE', #69920, #32667, #76178 ) ; +#63200 = FACE_OUTER_BOUND ( 'NONE', #15674, .T. ) ; +#63201 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#63202 = CIRCLE ( 'NONE', #5113, 10.00000000000009400 ) ; +#63203 = ORIENTED_EDGE ( 'NONE', *, *, #22140, .F. ) ; +#63204 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034400, 18.15930907398619400, -28.35186440610855000 ) ) ; +#63205 = ORIENTED_EDGE ( 'NONE', *, *, #80616, .T. ) ; +#63206 = ADVANCED_FACE ( 'NONE', ( #15373 ), #44495, .F. ) ; +#63207 = ORIENTED_EDGE ( 'NONE', *, *, #11317, .T. ) ; +#63208 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841385600, 60.16349705304866500, -28.30782889147482400 ) ) ; +#63209 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45166, #1684, #57724, #20484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001008322012793347400, 0.0003934298461347495000 ), + .UNSPECIFIED. ) ; +#63210 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.94142842854297000, -28.20555803802997700 ) ) ; +#63211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63212 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 2.666666666666682100, -10.73183747965883100 ) ) ; +#63213 = CIRCLE ( 'NONE', #29545, 10.00000000000009200 ) ; +#63214 = ORIENTED_EDGE ( 'NONE', *, *, #57592, .T. ) ; +#63215 = CIRCLE ( 'NONE', #30754, 9.500000000000097700 ) ; +#63216 = ORIENTED_EDGE ( 'NONE', *, *, #41031, .T. ) ; +#63217 = ORIENTED_EDGE ( 'NONE', *, *, #4845, .F. ) ; +#63218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63219 = EDGE_CURVE ( 'NONE', #19103, #67990, #77635, .T. ) ; +#63220 = EDGE_LOOP ( 'NONE', ( #19104, #42065, #63475 ) ) ; +#63221 = ADVANCED_FACE ( 'NONE', ( #79600 ), #56822, .T. ) ; +#63222 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23475, #4689, #42198, #4958 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520682700, 0.004414519045340945000 ), + .UNSPECIFIED. ) ; +#63223 = FACE_OUTER_BOUND ( 'NONE', #47253, .T. ) ; +#63224 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63225 = EDGE_CURVE ( 'NONE', #4437, #10382, #4654, .T. ) ; +#63226 = VERTEX_POINT ( 'NONE', #50794 ) ; +#63227 = EDGE_LOOP ( 'NONE', ( #67743, #64662, #32151 ) ) ; +#63228 = ORIENTED_EDGE ( 'NONE', *, *, #48541, .T. ) ; +#63229 = EDGE_LOOP ( 'NONE', ( #60366, #38579, #76918, #24132 ) ) ; +#63230 = CARTESIAN_POINT ( 'NONE', ( 18.93391916877728000, 2.132164548752079300, -24.91269233601471800 ) ) ; +#63231 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76339, #32819, #8050, #51558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249022100, 0.0008027336008646058200 ), + .UNSPECIFIED. ) ; +#63232 = CARTESIAN_POINT ( 'NONE', ( 16.45764012468383100, 56.42426956854069400, -28.60339038649758000 ) ) ; +#63233 = ORIENTED_EDGE ( 'NONE', *, *, #70458, .F. ) ; +#63234 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#63235 = EDGE_CURVE ( 'NONE', #24306, #71334, #13431, .T. ) ; +#63236 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 65.79999999999998300, -28.20555803802997700 ) ) ; +#63237 = ADVANCED_FACE ( 'NONE', ( #61118 ), #26070, .T. ) ; +#63238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63239 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13998, #38697, #20246, #63782 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932794107100 ), + .UNSPECIFIED. ) ; +#63240 = EDGE_LOOP ( 'NONE', ( #6777, #3010, #41906, #20310, #49230 ) ) ; +#63241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63242 = CIRCLE ( 'NONE', #6266, 10.00000000000009400 ) ; +#63243 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#63244 = EDGE_CURVE ( 'NONE', #10390, #55343, #66948, .T. ) ; +#63245 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 37.16666666666669300, 3.794441961969996900 ) ) ; +#63246 = EDGE_CURVE ( 'NONE', #28171, #47186, #28045, .T. ) ; +#63247 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 70.51916201875610600, -28.45106778992441600 ) ) ; +#63248 = ORIENTED_EDGE ( 'NONE', *, *, #41177, .F. ) ; +#63249 = ORIENTED_EDGE ( 'NONE', *, *, #49973, .T. ) ; +#63250 = EDGE_LOOP ( 'NONE', ( #79736, #4561, #30673, #2321, #73833 ) ) ; +#63251 = ORIENTED_EDGE ( 'NONE', *, *, #67758, .F. ) ; +#63252 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079851700, 18.16616330387838800, -28.27375072930974300 ) ) ; +#63253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63254 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274331600, 67.93535825203925100, -28.53896444442201400 ) ) ; +#63255 = FACE_OUTER_BOUND ( 'NONE', #72052, .T. ) ; +#63256 = CARTESIAN_POINT ( 'NONE', ( 19.95875846688198500, 96.55875846688258000, -27.53094045458578900 ) ) ; +#63257 = ADVANCED_FACE ( 'NONE', ( #59134 ), #57196, .T. ) ; +#63258 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215565900, 55.79999999999925800, -28.20555803803047800 ) ) ; +#63259 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#63260 = AXIS2_PLACEMENT_3D ( 'NONE', #2263, #8517, #39542 ) ; +#63261 = ORIENTED_EDGE ( 'NONE', *, *, #65843, .T. ) ; +#63262 = EDGE_CURVE ( 'NONE', #36626, #48534, #73752, .T. ) ; +#63263 = CARTESIAN_POINT ( 'NONE', ( 4.273564229228396600, 7.503450341053584400, -28.41129763681824700 ) ) ; +#63264 = EDGE_CURVE ( 'NONE', #52754, #75104, #42573, .T. ) ; +#63265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63266 = EDGE_CURVE ( 'NONE', #67043, #42850, #9490, .T. ) ; +#63267 = ORIENTED_EDGE ( 'NONE', *, *, #1603, .F. ) ; +#63268 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63269 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63271 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079881900, 30.93383669612129000, -28.27375072930955500 ) ) ; +#63272 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428228800, 61.52858243452108400, -28.70555803803014400 ) ) ; +#63273 = AXIS2_PLACEMENT_3D ( 'NONE', #24647, #68156, #30910 ) ; +#63274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63275 = LINE ( 'NONE', #6016, #26283 ) ; +#63276 = ORIENTED_EDGE ( 'NONE', *, *, #67527, .T. ) ; +#63277 = ORIENTED_EDGE ( 'NONE', *, *, #54859, .F. ) ; +#63278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63279 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63280 = ORIENTED_EDGE ( 'NONE', *, *, #44839, .T. ) ; +#63281 = AXIS2_PLACEMENT_3D ( 'NONE', #52530, #9008, #2745 ) ; +#63282 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541800, 61.01872124563919200, -28.53757464917570300 ) ) ; +#63283 = AXIS2_PLACEMENT_3D ( 'NONE', #66303, #35569, #53773 ) ; +#63284 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769050100, 29.28860447109612900, -28.53900456328625500 ) ) ; +#63285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#63286 = AXIS2_PLACEMENT_3D ( 'NONE', #50104, #56380, #6620 ) ; +#63287 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59792, #47223, #28815, #72315 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215342219900E-007, 0.0007606633682817542300 ), + .UNSPECIFIED. ) ; +#63288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63289 = CONICAL_SURFACE ( 'NONE', #46897, 10.50000000000009600, 0.7853981633974500600 ) ; +#63290 = FACE_OUTER_BOUND ( 'NONE', #48832, .T. ) ; +#63291 = ORIENTED_EDGE ( 'NONE', *, *, #66349, .F. ) ; +#63292 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#63293 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 8.666666666666682100, 1.294441961969997200 ) ) ; +#63294 = AXIS2_PLACEMENT_3D ( 'NONE', #21858, #65405, #28147 ) ; +#63295 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#63296 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155495500, 76.13383585008155300, -28.37247596307075900 ) ) ; +#63297 = PLANE ( 'NONE', #15725 ) ; +#63298 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 32.70037755566824000, -28.53664883431609000 ) ) ; +#63299 = CIRCLE ( 'NONE', #17495, 10.50000000000009200 ) ; +#63300 = VERTEX_POINT ( 'NONE', #14375 ) ; +#63301 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544023400, 51.52472935029899000, -28.39317435246130500 ) ) ; +#63302 = ORIENTED_EDGE ( 'NONE', *, *, #80735, .T. ) ; +#63303 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#63304 = EDGE_CURVE ( 'NONE', #42990, #35436, #52442, .T. ) ; +#63305 = CONICAL_SURFACE ( 'NONE', #57402, 10.00000000000009200, 0.7853981633974447300 ) ; +#63306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63307 = EDGE_LOOP ( 'NONE', ( #1223, #18810, #10596 ) ) ; +#63308 = AXIS2_PLACEMENT_3D ( 'NONE', #8166, #39180, #45410 ) ; +#63309 = EDGE_LOOP ( 'NONE', ( #652, #59808, #62532, #67098 ) ) ; +#63310 = VERTEX_POINT ( 'NONE', #57891 ) ; +#63311 = VERTEX_POINT ( 'NONE', #14110 ) ; +#63312 = CARTESIAN_POINT ( 'NONE', ( -11.21425855654403300, 70.07527064970099700, -28.39317435246130800 ) ) ; +#63313 = VERTEX_POINT ( 'NONE', #45605 ) ; +#63314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63315 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#63316 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001800, 30.56914835874665200, -28.45573375118225500 ) ) ; +#63317 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#63318 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#63319 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#63320 = CIRCLE ( 'NONE', #79207, 10.50000000000009600 ) ; +#63322 = ORIENTED_EDGE ( 'NONE', *, *, #36178, .T. ) ; +#63321 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714288300, 26.42318720225497900, -28.70555803802994200 ) ) ; +#63323 = EDGE_LOOP ( 'NONE', ( #39295, #62972, #8162, #27505 ) ) ; +#63324 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#63325 = ORIENTED_EDGE ( 'NONE', *, *, #55355, .F. ) ; +#63326 = ADVANCED_FACE ( 'NONE', ( #35812 ), #55220, .F. ) ; +#63327 = ORIENTED_EDGE ( 'NONE', *, *, #72914, .F. ) ; +#63328 = ORIENTED_EDGE ( 'NONE', *, *, #19237, .T. ) ; +#63329 = ORIENTED_EDGE ( 'NONE', *, *, #77971, .T. ) ; +#63330 = CARTESIAN_POINT ( 'NONE', ( -18.76176767805585800, 2.476450745611908000, -25.29336063513898100 ) ) ; +#63331 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63332 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 60.40166528437781300, -28.28704243186578200 ) ) ; +#63333 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195754100, 32.09027028261002100, -28.70555803802996000 ) ) ; +#63334 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 79.91070809551060000, -28.20555803802997700 ) ) ; +#63335 = ADVANCED_FACE ( 'NONE', ( #11470 ), #22160, .F. ) ; +#63336 = FACE_OUTER_BOUND ( 'NONE', #64329, .T. ) ; +#63337 = CARTESIAN_POINT ( 'NONE', ( -4.745461813558211600, 49.59617548195244300, -28.64146967277533700 ) ) ; +#63338 = ORIENTED_EDGE ( 'NONE', *, *, #11564, .F. ) ; +#63339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63340 = AXIS2_PLACEMENT_3D ( 'NONE', #77585, #40299, #3038 ) ; +#63341 = ADVANCED_FACE ( 'NONE', ( #24118 ), #39657, .T. ) ; +#63342 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70639, #57867, #58411, #21162 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.919159918457851200E-017, 0.001707792749031473900 ), + .UNSPECIFIED. ) ; +#63343 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#63344 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#63345 = EDGE_CURVE ( 'NONE', #7719, #66973, #37990, .T. ) ; +#63346 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 14.50000000000000900, -7.061964498581022400 ) ) ; +#63347 = CIRCLE ( 'NONE', #71772, 10.00000000000009400 ) ; +#63348 = ORIENTED_EDGE ( 'NONE', *, *, #56201, .F. ) ; +#63349 = VERTEX_POINT ( 'NONE', #2374 ) ; +#63350 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#63351 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034451500, 10.17701665379219700, -28.20555803802993500 ) ) ; +#63352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80486, #24460, #5964, #49425 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276952154600E-007, 0.0007677744771234664300 ), + .UNSPECIFIED. ) ; +#63355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63356 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63357 = EDGE_CURVE ( 'NONE', #25889, #50347, #71802, .T. ) ; +#63359 = EDGE_CURVE ( 'NONE', #5385, #37342, #23557, .T. ) ; +#63358 = CIRCLE ( 'NONE', #68255, 9.500000000000099500 ) ; +#63360 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3441, #15971, #40997, #3706 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795651000 ), + .UNSPECIFIED. ) ; +#63361 = ORIENTED_EDGE ( 'NONE', *, *, #8972, .F. ) ; +#63362 = CARTESIAN_POINT ( 'NONE', ( 2.892002542654475800, 70.27440177985812400, -28.29986836858027400 ) ) ; +#63363 = ORIENTED_EDGE ( 'NONE', *, *, #52835, .T. ) ; +#63364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63365 = VERTEX_POINT ( 'NONE', #27711 ) ; +#63366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63367 = AXIS2_PLACEMENT_3D ( 'NONE', #5833, #49307, #12088 ) ; +#63368 = EDGE_CURVE ( 'NONE', #31617, #76021, #9056, .T. ) ; +#63369 = EDGE_CURVE ( 'NONE', #78359, #78012, #38657, .T. ) ; +#63370 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100650600, 41.97636006919910300, -28.38670679782168800 ) ) ; +#63371 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59076, #58796, #3030, #21822 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278501200, 0.0005468822770170082400 ), + .UNSPECIFIED. ) ; +#63372 = EDGE_CURVE ( 'NONE', #1060, #68974, #75418, .T. ) ; +#63373 = CONICAL_SURFACE ( 'NONE', #40341, 10.50000000000009600, 0.7853981633974500600 ) ; +#63375 = VERTEX_POINT ( 'NONE', #3186 ) ; +#63374 = EDGE_CURVE ( 'NONE', #16633, #52338, #7523, .T. ) ; +#63376 = ORIENTED_EDGE ( 'NONE', *, *, #8835, .F. ) ; +#63377 = AXIS2_PLACEMENT_3D ( 'NONE', #48373, #11155, #54654 ) ; +#63378 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188003500, 9.569148358746641500, -28.45573375118225100 ) ) ; +#63379 = ORIENTED_EDGE ( 'NONE', *, *, #45430, .T. ) ; +#63380 = FACE_OUTER_BOUND ( 'NONE', #35857, .T. ) ; +#63381 = ORIENTED_EDGE ( 'NONE', *, *, #10551, .F. ) ; +#63382 = EDGE_LOOP ( 'NONE', ( #40598, #28692, #59290 ) ) ; +#63383 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#63384 = ORIENTED_EDGE ( 'NONE', *, *, #58037, .F. ) ; +#63385 = ORIENTED_EDGE ( 'NONE', *, *, #27655, .T. ) ; +#63386 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 58.16666666666667100, -6.205558038030004800 ) ) ; +#63387 = AXIS2_PLACEMENT_3D ( 'NONE', #73940, #36642, #80180 ) ; +#63388 = AXIS2_PLACEMENT_3D ( 'NONE', #79367, #4819, #35840 ) ; +#63389 = CONICAL_SURFACE ( 'NONE', #67205, 10.50000000000009200, 0.7853981633974482800 ) ; +#63390 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63391 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100914000, 20.97636006919875500, -28.38670679782146800 ) ) ; +#63392 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 23.16666666666668900, -9.205558038030003900 ) ) ; +#63393 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#63394 = CIRCLE ( 'NONE', #63006, 5.000000000000000900 ) ; +#63395 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548954100, 9.940690926013790100, -28.35186440610860700 ) ) ; +#63396 = EDGE_LOOP ( 'NONE', ( #68975, #7974, #37902, #79356 ) ) ; +#63397 = VERTEX_POINT ( 'NONE', #59230 ) ; +#63398 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 91.59999999999999400, -28.70555803803001300 ) ) ; +#63399 = VERTEX_POINT ( 'NONE', #21970 ) ; +#63400 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 60.50000000000001400, 6.847000845227641200 ) ) ; +#63401 = ORIENTED_EDGE ( 'NONE', *, *, #18690, .T. ) ; +#63402 = ORIENTED_EDGE ( 'NONE', *, *, #68360, .T. ) ; +#63403 = ORIENTED_EDGE ( 'NONE', *, *, #28629, .F. ) ; +#63404 = VERTEX_POINT ( 'NONE', #46687 ) ; +#63405 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823716300, 10.90456253568389200, -28.61277292027073600 ) ) ; +#63406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63407 = FACE_OUTER_BOUND ( 'NONE', #15377, .T. ) ; +#63408 = AXIS2_PLACEMENT_3D ( 'NONE', #70184, #26709, #57690 ) ; +#63409 = EDGE_CURVE ( 'NONE', #79096, #66662, #75673, .T. ) ; +#63410 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35108, #41320, #4067, #47546 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001089487075279167100 ), + .UNSPECIFIED. ) ; +#63411 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 23.37738371066728500, -28.70555803802995200 ) ) ; +#63412 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#63413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63415 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263300, 38.57379779496234600, -28.70555803802995200 ) ) ; +#63416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#63417 = CIRCLE ( 'NONE', #30563, 10.00000000000009200 ) ; +#63418 = ORIENTED_EDGE ( 'NONE', *, *, #47467, .T. ) ; +#63419 = EDGE_CURVE ( 'NONE', #62677, #13531, #40638, .T. ) ; +#63420 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819198200, 61.65075715145310700, -28.20555803802997700 ) ) ; +#63421 = AXIS2_PLACEMENT_3D ( 'NONE', #42763, #11790, #80046 ) ; +#63422 = CARTESIAN_POINT ( 'NONE', ( 3.464812346017064100, 9.406791769321971600, -28.68794773163824600 ) ) ; +#63423 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 60.16054007504465100, -28.34042301926881200 ) ) ; +#63424 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 51.43250300240229900, -28.20555803802997700 ) ) ; +#63425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63426 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#63427 = ADVANCED_FACE ( 'NONE', ( #5607 ), #51285, .F. ) ; +#63428 = CARTESIAN_POINT ( 'NONE', ( 16.21166456674785600, 9.099612141850464300, -28.63723391752195700 ) ) ; +#63429 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#63430 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.93250300240229200, -28.20555803802996700 ) ) ; +#63431 = CARTESIAN_POINT ( 'NONE', ( 9.811079983385102600, 20.60677350908849800, -28.30799595738891100 ) ) ; +#63432 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428533400, 70.07141756547893900, -28.70555803802997700 ) ) ; +#63433 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63434 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63435 = AXIS2_PLACEMENT_3D ( 'NONE', #39351, #26884, #13846 ) ; +#63436 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 64.00000000000000000, -1.205558038030005300 ) ) ; +#63437 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63438 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63439 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#63440 = ORIENTED_EDGE ( 'NONE', *, *, #41167, .T. ) ; +#63441 = ORIENTED_EDGE ( 'NONE', *, *, #63489, .T. ) ; +#63442 = CARTESIAN_POINT ( 'NONE', ( 1.899882735204325500, 45.55000000000000400, -28.53808257741934500 ) ) ; +#63443 = VERTEX_POINT ( 'NONE', #72033 ) ; +#63444 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007459700, 17.31967837323388800, -28.55467576046969900 ) ) ; +#63445 = CARTESIAN_POINT ( 'NONE', ( -10.92650815748462800, 71.37838321498817600, -28.29547179040444100 ) ) ; +#63446 = CARTESIAN_POINT ( 'NONE', ( 10.24306493325779000, 61.43482203710616600, -28.29548531138992500 ) ) ; +#63447 = AXIS2_PLACEMENT_3D ( 'NONE', #32572, #51031, #1559 ) ; +#63448 = CARTESIAN_POINT ( 'NONE', ( -4.766318835084253400, 94.21465145973552100, -28.37247945210592800 ) ) ; +#63449 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507543700, 21.02620220503760300, -28.70555803802994200 ) ) ; +#63450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8536, #52041, #27358, #70831 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083047319200E-007, 0.0003101809493098267800 ), + .UNSPECIFIED. ) ; +#63451 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#63452 = ADVANCED_FACE ( 'NONE', ( #3634 ), #18249, .T. ) ; +#63453 = CIRCLE ( 'NONE', #36646, 10.00000000000009400 ) ; +#63454 = ORIENTED_EDGE ( 'NONE', *, *, #10268, .T. ) ; +#63456 = EDGE_CURVE ( 'NONE', #64964, #19038, #60964, .T. ) ; +#63455 = EDGE_LOOP ( 'NONE', ( #37044, #42841, #48437, #3608 ) ) ; +#63457 = CONICAL_SURFACE ( 'NONE', #25011, 10.50000000000009600, 0.7853981633974500600 ) ; +#63458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63459 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37661, #43914, #50164, #12955 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983715477543000E-007, 0.001076779618376254600 ), + .UNSPECIFIED. ) ; +#63460 = ORIENTED_EDGE ( 'NONE', *, *, #65776, .T. ) ; +#63461 = ORIENTED_EDGE ( 'NONE', *, *, #21998, .F. ) ; +#63462 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519000, 65.79999999999982700, -28.63843632546338100 ) ) ; +#63463 = ORIENTED_EDGE ( 'NONE', *, *, #32734, .F. ) ; +#63464 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 29.16666666666665700, -3.349151577478988200 ) ) ; +#63465 = ORIENTED_EDGE ( 'NONE', *, *, #44230, .T. ) ; +#63466 = EDGE_LOOP ( 'NONE', ( #57529, #30262, #67900, #47487 ) ) ; +#63467 = CIRCLE ( 'NONE', #71864, 10.00000000000009200 ) ; +#63468 = CARTESIAN_POINT ( 'NONE', ( 4.188920016614879700, 17.99322649091148600, -28.30799595738887900 ) ) ; +#63469 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#63470 = ORIENTED_EDGE ( 'NONE', *, *, #8525, .T. ) ; +#63471 = EDGE_CURVE ( 'NONE', #26866, #52379, #69827, .T. ) ; +#63472 = CIRCLE ( 'NONE', #71827, 9.500000000000097700 ) ; +#63473 = ORIENTED_EDGE ( 'NONE', *, *, #73662, .F. ) ; +#63474 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 80.34267608797600200, -28.20555803802997700 ) ) ; +#63475 = ORIENTED_EDGE ( 'NONE', *, *, #19397, .T. ) ; +#63476 = EDGE_CURVE ( 'NONE', #74850, #76469, #34818, .T. ) ; +#63477 = EDGE_LOOP ( 'NONE', ( #17643, #57811, #52668, #39982 ) ) ; +#63478 = VERTEX_POINT ( 'NONE', #22240 ) ; +#63479 = VECTOR ( 'NONE', #26439, 1000.000000000000000 ) ; +#63480 = CARTESIAN_POINT ( 'NONE', ( -16.10512553856428400, 40.05333467158440900, -28.65803483468293000 ) ) ; +#63481 = ORIENTED_EDGE ( 'NONE', *, *, #36171, .F. ) ; +#63482 = FACE_OUTER_BOUND ( 'NONE', #76234, .T. ) ; +#63483 = AXIS2_PLACEMENT_3D ( 'NONE', #5983, #49457, #12245 ) ; +#63484 = EDGE_CURVE ( 'NONE', #78578, #8197, #36727, .T. ) ; +#63485 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#63486 = PLANE ( 'NONE', #70858 ) ; +#63487 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 0.4999999999999979500, 6.847000845227646500 ) ) ; +#63488 = ORIENTED_EDGE ( 'NONE', *, *, #46029, .F. ) ; +#63489 = EDGE_CURVE ( 'NONE', #33532, #74851, #53283, .T. ) ; +#63490 = AXIS2_PLACEMENT_3D ( 'NONE', #8241, #51743, #14538 ) ; +#63491 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63492 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 60.16054007504465100, -28.34042301926881200 ) ) ; +#63493 = CIRCLE ( 'NONE', #31024, 10.50000000000009900 ) ; +#63494 = EDGE_LOOP ( 'NONE', ( #62500, #2945, #38135, #28006, #39143 ) ) ; +#63495 = EDGE_LOOP ( 'NONE', ( #41715, #63513, #10702, #4405 ) ) ; +#63496 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430200, 31.17701665379239600, -28.20555803802996000 ) ) ; +#63497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63499 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995689900, 14.98096581827296500, -28.69431509262338100 ) ) ; +#63500 = AXIS2_PLACEMENT_3D ( 'NONE', #14895, #58416, #21169 ) ; +#63501 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 30.93250300240229200, -28.20555803802996700 ) ) ; +#63502 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 65.79999999999998300, -28.70555803802997700 ) ) ; +#63503 = EDGE_CURVE ( 'NONE', #36371, #33960, #46446, .T. ) ; +#63504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40976, #78244, #53488, #16233 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278796100, 0.0005468822770176152800 ), + .UNSPECIFIED. ) ; +#63505 = EDGE_CURVE ( 'NONE', #28926, #23113, #32033, .T. ) ; +#63506 = ADVANCED_FACE ( 'NONE', ( #1679 ), #64011, .F. ) ; +#63507 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#63509 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 51.46283204837325800, -28.48697406221693400 ) ) ; +#63508 = AXIS2_PLACEMENT_3D ( 'NONE', #32470, #32207, #75986 ) ; +#63510 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 35.00000000000000700, -6.205558038030003100 ) ) ; +#63511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63512 = CARTESIAN_POINT ( 'NONE', ( 4.720031324268598300, 93.69934232704480300, -28.49690748628291500 ) ) ; +#63513 = ORIENTED_EDGE ( 'NONE', *, *, #4717, .T. ) ; +#63514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63515 = EDGE_LOOP ( 'NONE', ( #59387, #67934, #54921, #47778 ) ) ; +#63516 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906780400, 41.67036336027455700, -28.27338767626451600 ) ) ; +#63517 = EDGE_CURVE ( 'NONE', #17804, #9420, #17586, .T. ) ; +#63518 = CARTESIAN_POINT ( 'NONE', ( 16.01360899404621200, 93.62721798809241100, -28.49792175823335000 ) ) ; +#63519 = ADVANCED_FACE ( 'NONE', ( #16310 ), #60593, .T. ) ; +#63520 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#63521 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432843700, 18.35339758437810400, -28.20555803802992800 ) ) ; +#63522 = AXIS2_PLACEMENT_3D ( 'NONE', #31090, #74599, #37292 ) ; +#63523 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819091600, 61.65075715145258800, -28.20555803803014100 ) ) ; +#63524 = AXIS2_PLACEMENT_3D ( 'NONE', #47179, #46912, #9955 ) ; +#63525 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63526 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658263800, 90.15151454780964000, -28.67627428870436600 ) ) ; +#63527 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 33.87738371066728100, -28.70555803802996700 ) ) ; +#63528 = EDGE_LOOP ( 'NONE', ( #45682, #43675, #31867 ) ) ; +#63529 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#63530 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#63531 = CIRCLE ( 'NONE', #45426, 10.00000000000009600 ) ; +#63532 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63533 = ORIENTED_EDGE ( 'NONE', *, *, #72653, .F. ) ; +#63534 = PLANE ( 'NONE', #57938 ) ; +#63535 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000075500, 83.42856308690566900, -28.36981695106801700 ) ) ; +#63536 = CONICAL_SURFACE ( 'NONE', #63408, 10.50000000000009600, 0.7853981633974500600 ) ; +#63537 = ORIENTED_EDGE ( 'NONE', *, *, #15309, .F. ) ; +#63538 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#63539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63540 = ADVANCED_FACE ( 'NONE', ( #65958 ), #14345, .F. ) ; +#63541 = FACE_OUTER_BOUND ( 'NONE', #9341, .T. ) ; +#63542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63543 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8250, #33034, #70283, #51758 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983711486802800E-007, 0.001076779618376679000 ), + .UNSPECIFIED. ) ; +#63545 = VERTEX_POINT ( 'NONE', #42056 ) ; +#63544 = CARTESIAN_POINT ( 'NONE', ( -17.24306493325783400, 51.43482203710631500, -28.29548531138973600 ) ) ; +#63546 = EDGE_LOOP ( 'NONE', ( #14958, #40984, #13714 ) ) ; +#63547 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709905900, 41.53732497909462800, -28.41043597897463600 ) ) ; +#63548 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63549 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576918600, 35.05000000000000400, -28.65220501466659200 ) ) ; +#63550 = ORIENTED_EDGE ( 'NONE', *, *, #51866, .F. ) ; +#63551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63552 = FACE_OUTER_BOUND ( 'NONE', #41503, .T. ) ; +#63553 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63554 = CARTESIAN_POINT ( 'NONE', ( 16.93476732735788900, 22.14004081115112400, -28.51837550109416200 ) ) ; +#63555 = ADVANCED_FACE ( 'NONE', ( #80535 ), #62047, .F. ) ; +#63556 = ORIENTED_EDGE ( 'NONE', *, *, #55142, .F. ) ; +#63557 = AXIS2_PLACEMENT_3D ( 'NONE', #46829, #9589, #53099 ) ; +#63558 = FACE_OUTER_BOUND ( 'NONE', #23390, .T. ) ; +#63559 = ORIENTED_EDGE ( 'NONE', *, *, #22728, .T. ) ; +#63560 = ORIENTED_EDGE ( 'NONE', *, *, #34695, .T. ) ; +#63561 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70815, #27338, #39814, #2524 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572033233300E-007, 0.0007596410370205255600 ), + .UNSPECIFIED. ) ; +#63562 = ORIENTED_EDGE ( 'NONE', *, *, #76076, .F. ) ; +#63563 = ORIENTED_EDGE ( 'NONE', *, *, #4253, .F. ) ; +#63564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63565 = CONICAL_SURFACE ( 'NONE', #4324, 10.50000000000009600, 0.7853981633974500600 ) ; +#63566 = ORIENTED_EDGE ( 'NONE', *, *, #18193, .F. ) ; +#63567 = CONICAL_SURFACE ( 'NONE', #67463, 10.50000000000009600, 0.7853981633974500600 ) ; +#63568 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 6.500000000000005300, -4.865812075874393000 ) ) ; +#63569 = AXIS2_PLACEMENT_3D ( 'NONE', #72810, #35563, #79075 ) ; +#63570 = EDGE_CURVE ( 'NONE', #62529, #27271, #3087, .T. ) ; +#63571 = ORIENTED_EDGE ( 'NONE', *, *, #51148, .T. ) ; +#63572 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180778700, 51.65075715145311400, -28.20555803802997700 ) ) ; +#63573 = AXIS2_PLACEMENT_3D ( 'NONE', #30319, #61575, #67548 ) ; +#63574 = LINE ( 'NONE', #17389, #52840 ) ; +#63575 = ORIENTED_EDGE ( 'NONE', *, *, #51679, .F. ) ; +#63576 = CARTESIAN_POINT ( 'NONE', ( -1.851846210996908900, 55.80000000000006800, -28.37148172714627100 ) ) ; +#63577 = FACE_OUTER_BOUND ( 'NONE', #56996, .T. ) ; +#63578 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 69.77559325427184000, -28.45987523529581900 ) ) ; +#63579 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148628700, 15.00238095238077700, -28.70555803802992800 ) ) ; +#63580 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#63581 = CARTESIAN_POINT ( 'NONE', ( -16.43583308531796300, 50.68862753584483000, -28.60398777208251900 ) ) ; +#63582 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10700, #72984, #10973, #54469 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716404500, 0.004080294652942880300 ), + .UNSPECIFIED. ) ; +#63583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63584 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#63585 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124983100, 86.46717019299480000, -28.53914313452737500 ) ) ; +#63586 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#63587 = EDGE_CURVE ( 'NONE', #31791, #48907, #49349, .T. ) ; +#63588 = EDGE_CURVE ( 'NONE', #19205, #68985, #69409, .T. ) ; +#63589 = CARTESIAN_POINT ( 'NONE', ( -17.27646703504412800, 5.447042206823299500, -27.60913932685449300 ) ) ; +#63590 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#63591 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 81.43650294695081000, -28.30782889147504700 ) ) ; +#63592 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 90.34267608797601700, -28.20555803803030800 ) ) ; +#63594 = ORIENTED_EDGE ( 'NONE', *, *, #41459, .T. ) ; +#63593 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-014, 12.15857157145694100, -28.20555803802994200 ) ) ; +#63595 = CARTESIAN_POINT ( 'NONE', ( 9.093266739736723300, 24.54999999999999700, -28.70555803802994200 ) ) ; +#63596 = EDGE_CURVE ( 'NONE', #10656, #80692, #67890, .T. ) ; +#63597 = ORIENTED_EDGE ( 'NONE', *, *, #28910, .F. ) ; +#63598 = ADVANCED_FACE ( 'NONE', ( #78606 ), #76609, .T. ) ; +#63599 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.36203212531321700, -28.38801640354855800 ) ) ; +#63600 = EDGE_CURVE ( 'NONE', #47717, #24749, #54954, .T. ) ; +#63601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63602 = CIRCLE ( 'NONE', #76, 10.00000000000009400 ) ; +#63603 = ORIENTED_EDGE ( 'NONE', *, *, #78391, .F. ) ; +#63604 = AXIS2_PLACEMENT_3D ( 'NONE', #60623, #23354, #66873 ) ; +#63605 = CONICAL_SURFACE ( 'NONE', #51303, 10.50000000000009600, 0.7853981633974500600 ) ; +#63606 = EDGE_LOOP ( 'NONE', ( #7780, #19281, #32801, #79000 ) ) ; +#63607 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 12.33333333333334800, 2.794441961969998300 ) ) ; +#63608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63609 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180860400, 81.65075715145344800, -28.20555803803030800 ) ) ; +#63610 = VERTEX_POINT ( 'NONE', #67367 ) ; +#63611 = FACE_OUTER_BOUND ( 'NONE', #38283, .T. ) ; +#63612 = ORIENTED_EDGE ( 'NONE', *, *, #21663, .F. ) ; +#63613 = ORIENTED_EDGE ( 'NONE', *, *, #41501, .F. ) ; +#63614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63615 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853332100, 49.30869142985029900, -28.37223374938523800 ) ) ; +#63616 = ADVANCED_FACE ( 'NONE', ( #12414 ), #43503, .F. ) ; +#63617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63619 = AXIS2_PLACEMENT_3D ( 'NONE', #26086, #69563, #32324 ) ; +#63620 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217475100, 61.43945992495532900, -28.34042301926881200 ) ) ; +#63621 = CIRCLE ( 'NONE', #68634, 9.500000000000099500 ) ; +#63622 = EDGE_CURVE ( 'NONE', #74917, #44639, #60105, .T. ) ; +#63623 = EDGE_CURVE ( 'NONE', #7482, #77979, #40496, .T. ) ; +#63624 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506412800, 10.01912043132459800, -28.30223257055588300 ) ) ; +#63625 = EDGE_CURVE ( 'NONE', #49715, #32608, #32827, .T. ) ; +#63626 = FACE_OUTER_BOUND ( 'NONE', #4675, .T. ) ; +#63627 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811159800, 74.54539096019127000, -28.69802137271993600 ) ) ; +#63628 = EDGE_LOOP ( 'NONE', ( #46800, #58196, #63440 ) ) ; +#63629 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#63630 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285718000, 57.92318720225497900, -28.70555803802997700 ) ) ; +#63631 = CIRCLE ( 'NONE', #8643, 10.00000000000009600 ) ; +#63632 = AXIS2_PLACEMENT_3D ( 'NONE', #70377, #33130, #76630 ) ; +#63633 = ORIENTED_EDGE ( 'NONE', *, *, #55825, .F. ) ; +#63634 = ADVANCED_FACE ( 'NONE', ( #47397 ), #65336, .F. ) ; +#63635 = EDGE_LOOP ( 'NONE', ( #59452, #39392, #23913 ) ) ; +#63636 = ORIENTED_EDGE ( 'NONE', *, *, #73330, .T. ) ; +#63637 = AXIS2_PLACEMENT_3D ( 'NONE', #16342, #59869, #22588 ) ; +#63638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3008, #52506, #65076, #46500 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286254160500E-007, 0.0007303759720926888000 ), + .UNSPECIFIED. ) ; +#63639 = CARTESIAN_POINT ( 'NONE', ( 11.23083069465680600, 90.65007990305389300, -28.43638873268738000 ) ) ; +#63640 = ORIENTED_EDGE ( 'NONE', *, *, #30853, .F. ) ; +#63641 = EDGE_CURVE ( 'NONE', #18254, #70292, #29002, .T. ) ; +#63642 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 90.70627955247211100, -28.45034744217088700 ) ) ; +#63643 = CONICAL_SURFACE ( 'NONE', #76262, 10.50000000000009200, 0.7853981633974482800 ) ; +#63644 = AXIS2_PLACEMENT_3D ( 'NONE', #78949, #66424, #35175 ) ; +#63645 = AXIS2_PLACEMENT_3D ( 'NONE', #11770, #61554, #24269 ) ; +#63646 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 51.43945992495533700, -28.34042301926881200 ) ) ; +#63647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63648 = ADVANCED_FACE ( 'NONE', ( #45432 ), #30280, .T. ) ; +#63649 = ORIENTED_EDGE ( 'NONE', *, *, #28380, .T. ) ; +#63650 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158300, 44.59761904761920400, -28.70555803802996700 ) ) ; +#63651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63652 = VERTEX_POINT ( 'NONE', #12423 ) ; +#63653 = CONICAL_SURFACE ( 'NONE', #36200, 10.00000000000009200, 0.7853981633974447300 ) ; +#63654 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 30.93250300240228900, -28.20555803802996700 ) ) ; +#63655 = ADVANCED_FACE ( 'NONE', ( #15654 ), #77931, .T. ) ; +#63656 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 56.00000000000000700, 3.794441961969998300 ) ) ; +#63657 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.43250300240230600, -28.20555803802997700 ) ) ; +#63658 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123095200, 50.28860447109612200, -28.53900456328627300 ) ) ; +#63659 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#63660 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 21.00000000000000400, 6.794441961969995200 ) ) ; +#63661 = AXIS2_PLACEMENT_3D ( 'NONE', #31671, #75184, #37895 ) ; +#63662 = CARTESIAN_POINT ( 'NONE', ( -17.31587870724581500, 20.12316711109005500, -28.43418176890224900 ) ) ; +#63663 = FACE_OUTER_BOUND ( 'NONE', #70136, .T. ) ; +#63664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63665 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 58.33333333333334300, -10.73183747965883100 ) ) ; +#63666 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63667 = ORIENTED_EDGE ( 'NONE', *, *, #38534, .T. ) ; +#63668 = AXIS2_PLACEMENT_3D ( 'NONE', #47350, #10140, #53642 ) ; +#63669 = ORIENTED_EDGE ( 'NONE', *, *, #15861, .T. ) ; +#63670 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63672 = EDGE_LOOP ( 'NONE', ( #66157, #67732, #18417 ) ) ; +#63673 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16271, #59794, #66052, #28816 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700657400, 0.0009400395309963770100 ), + .UNSPECIFIED. ) ; +#63674 = EDGE_CURVE ( 'NONE', #28740, #68448, #26057, .T. ) ; +#63675 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.418457393421045200, -28.68863412692832800 ) ) ; +#63676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63677 = CONICAL_SURFACE ( 'NONE', #73026, 10.00000000000009400, 0.7853981633974447300 ) ; +#63678 = ORIENTED_EDGE ( 'NONE', *, *, #35309, .T. ) ; +#63679 = CONICAL_SURFACE ( 'NONE', #47622, 10.50000000000009800, 0.7853981633974518300 ) ; +#63680 = AXIS2_PLACEMENT_3D ( 'NONE', #11346, #79605, #23581 ) ; +#63681 = ORIENTED_EDGE ( 'NONE', *, *, #78260, .T. ) ; +#63682 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 38.92298334620762300, -28.20555803802996700 ) ) ; +#63683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63684 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25908, #69397, #75650, #38368 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648280397365000E-007, 0.0004318378175221073200 ), + .UNSPECIFIED. ) ; +#63685 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63686 = FACE_OUTER_BOUND ( 'NONE', #61737, .T. ) ; +#63687 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609431200, 61.46283204837340000, -28.48697406221666700 ) ) ; +#63688 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880590300, 35.67103694117759000, -28.53160243214819800 ) ) ; +#63689 = CIRCLE ( 'NONE', #46051, 9.500000000000095900 ) ; +#63690 = CARTESIAN_POINT ( 'NONE', ( -9.550568452615777900, 50.66712112140498900, -28.65429851891194700 ) ) ; +#63691 = EDGE_LOOP ( 'NONE', ( #57271, #79045, #59316 ) ) ; +#63692 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63693 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.65857157145701000, -28.20555803802997700 ) ) ; +#63694 = ORIENTED_EDGE ( 'NONE', *, *, #19354, .F. ) ; +#63695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #83, #37316, #6349, #49818 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001333132141653820700 ), + .UNSPECIFIED. ) ; +#63696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63698 = ORIENTED_EDGE ( 'NONE', *, *, #6377, .T. ) ; +#63697 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#63699 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609431200, 61.46283204837340000, -28.48697406221666700 ) ) ; +#63700 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 51.68929190448859900, -28.20555803803030800 ) ) ; +#63701 = CARTESIAN_POINT ( 'NONE', ( -17.22115791441228800, 30.93523632220587800, -28.30315276798566200 ) ) ; +#63702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63703 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54475, #29765, #48459, #11248 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695385844958000E-007, 0.0007987676590765264600 ), + .UNSPECIFIED. ) ; +#63704 = CIRCLE ( 'NONE', #10728, 10.00000000000009600 ) ; +#63705 = CARTESIAN_POINT ( 'NONE', ( 16.44668611327870500, 81.48387403443021500, -28.57421789838277000 ) ) ; +#63706 = VERTEX_POINT ( 'NONE', #74699 ) ; +#63707 = CONICAL_SURFACE ( 'NONE', #48191, 10.50000000000009600, 0.7853981633974500600 ) ; +#63708 = EDGE_CURVE ( 'NONE', #59944, #59412, #11596, .T. ) ; +#63709 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 61.83333333333331400, 0.9380355014189731800 ) ) ; +#63710 = ORIENTED_EDGE ( 'NONE', *, *, #55299, .T. ) ; +#63711 = ORIENTED_EDGE ( 'NONE', *, *, #43645, .F. ) ; +#63713 = EDGE_CURVE ( 'NONE', #5209, #39702, #77908, .T. ) ; +#63712 = ORIENTED_EDGE ( 'NONE', *, *, #26558, .F. ) ; +#63714 = ORIENTED_EDGE ( 'NONE', *, *, #36315, .F. ) ; +#63715 = VERTEX_POINT ( 'NONE', #405 ) ; +#63716 = CIRCLE ( 'NONE', #33502, 10.00000000000009200 ) ; +#63717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63718 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63719 = CARTESIAN_POINT ( 'NONE', ( -4.626483568059482500, 92.66042437177418400, -28.66312194083703300 ) ) ; +#63720 = ORIENTED_EDGE ( 'NONE', *, *, #75152, .T. ) ; +#63721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63722 = EDGE_CURVE ( 'NONE', #38334, #76395, #63459, .T. ) ; +#63723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63724 = EDGE_CURVE ( 'NONE', #12788, #26728, #48939, .T. ) ; +#63725 = ORIENTED_EDGE ( 'NONE', *, *, #9733, .T. ) ; +#63726 = AXIS2_PLACEMENT_3D ( 'NONE', #54525, #17274, #60804 ) ; +#63727 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63728 = EDGE_CURVE ( 'NONE', #58986, #67155, #34537, .T. ) ; +#63729 = EDGE_LOOP ( 'NONE', ( #44498, #66317, #46546 ) ) ; +#63730 = ADVANCED_FACE ( 'NONE', ( #13725 ), #44785, .F. ) ; +#63731 = CONICAL_SURFACE ( 'NONE', #36673, 10.50000000000009600, 0.7853981633974500600 ) ; +#63732 = CARTESIAN_POINT ( 'NONE', ( -3.959729345560822500, 28.72438272935921300, -28.30310183417006400 ) ) ; +#63733 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63941, #20408, #8118, #14412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286303202100E-007, 0.0007303759720926909700 ), + .UNSPECIFIED. ) ; +#63734 = ADVANCED_FACE ( 'NONE', ( #48706 ), #11762, .F. ) ; +#63735 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 27.00000000000001100, -1.205558038030005300 ) ) ; +#63736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63737 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #50248, #37746 ) ; +#63738 = EDGE_CURVE ( 'NONE', #52338, #9377, #20067, .T. ) ; +#63739 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16032, #34819, #41051, #3771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951631460900E-007, 0.0007331043932795801700 ), + .UNSPECIFIED. ) ; +#63740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#63741 = EDGE_CURVE ( 'NONE', #16279, #14665, #32191, .T. ) ; +#63742 = EDGE_CURVE ( 'NONE', #54615, #4205, #46758, .T. ) ; +#63743 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63744 = ADVANCED_FACE ( 'NONE', ( #28347 ), #26371, .F. ) ; +#63745 = AXIS2_PLACEMENT_3D ( 'NONE', #9631, #53140, #15886 ) ; +#63746 = CIRCLE ( 'NONE', #36121, 9.500000000000099500 ) ; +#63747 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63748 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526978900, 80.01262610361138200, -28.29936525552453500 ) ) ; +#63749 = VERTEX_POINT ( 'NONE', #7470 ) ; +#63750 = AXIS2_PLACEMENT_3D ( 'NONE', #75265, #37980, #721 ) ; +#63751 = ORIENTED_EDGE ( 'NONE', *, *, #57997, .T. ) ; +#63752 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#63753 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528150900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#63754 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, -1.666666666666656500, -6.705558038030005700 ) ) ; +#63755 = FACE_OUTER_BOUND ( 'NONE', #55206, .T. ) ; +#63756 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252843200, 18.13131911501858100, -28.51286550264478600 ) ) ; +#63757 = EDGE_LOOP ( 'NONE', ( #66211, #33709, #69530, #69467 ) ) ; +#63758 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343284300, 9.746602415621378400, -28.20555803803042500 ) ) ; +#63759 = ORIENTED_EDGE ( 'NONE', *, *, #14121, .T. ) ; +#63760 = CYLINDRICAL_SURFACE ( 'NONE', #5745, 10.00000000000000000 ) ; +#63761 = FACE_OUTER_BOUND ( 'NONE', #76715, .T. ) ; +#63762 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707917200, 71.66410593583241000, -28.68054222049963200 ) ) ; +#63763 = EDGE_LOOP ( 'NONE', ( #14679, #48357, #51071 ) ) ; +#63764 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462690200, 60.20590598242370800, -28.39369363572355800 ) ) ; +#63765 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462801900, 51.25732391202399200, -28.20555803802997700 ) ) ; +#63766 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408173200, 81.21413374642160900, -28.27331438134787000 ) ) ; +#63767 = ORIENTED_EDGE ( 'NONE', *, *, #6403, .F. ) ; +#63768 = AXIS2_PLACEMENT_3D ( 'NONE', #38548, #1315, #44792 ) ; +#63769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63770 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63771 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#63772 = CIRCLE ( 'NONE', #58602, 10.00000000000009400 ) ; +#63773 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 8.673617379884035500E-016, -18.70555803803001300 ) ) ; +#63774 = ORIENTED_EDGE ( 'NONE', *, *, #77706, .F. ) ; +#63776 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 32.83333333333333600, 3.794441961969996900 ) ) ; +#63775 = CIRCLE ( 'NONE', #9623, 10.00000000000009200 ) ; +#63777 = ORIENTED_EDGE ( 'NONE', *, *, #44555, .T. ) ; +#63778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63779 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#63780 = EDGE_CURVE ( 'NONE', #36509, #8494, #5594, .T. ) ; +#63781 = ORIENTED_EDGE ( 'NONE', *, *, #69515, .F. ) ; +#63782 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000009100, 51.96823913367169500, -28.70555803803030800 ) ) ; +#63783 = CARTESIAN_POINT ( 'NONE', ( 11.20584859653734500, 71.39409401757598100, -28.39369363572390300 ) ) ; +#63784 = AXIS2_PLACEMENT_3D ( 'NONE', #64737, #27461, #70946 ) ; +#63785 = ORIENTED_EDGE ( 'NONE', *, *, #49693, .F. ) ; +#63786 = ORIENTED_EDGE ( 'NONE', *, *, #56679, .T. ) ; +#63787 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567306400, 18.35339758437789800, -28.20555803803009500 ) ) ; +#63788 = CONICAL_SURFACE ( 'NONE', #68271, 10.00000000000009400, 0.7853981633974447300 ) ; +#63789 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466623300, 39.83106028708541400, -28.57333386111662300 ) ) ; +#63790 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#63792 = ORIENTED_EDGE ( 'NONE', *, *, #4637, .F. ) ; +#63791 = CARTESIAN_POINT ( 'NONE', ( -6.100334448160481300, 80.79999999999999700, -28.20555803802989600 ) ) ; +#63793 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.89610994602603700, -28.37519436813183700 ) ) ; +#63795 = ORIENTED_EDGE ( 'NONE', *, *, #41776, .F. ) ; +#63794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11605, #48822, #17854, #61399 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225418288900E-007, 0.001119324643800072800 ), + .UNSPECIFIED. ) ; +#63796 = ORIENTED_EDGE ( 'NONE', *, *, #64239, .T. ) ; +#63797 = CONICAL_SURFACE ( 'NONE', #45078, 10.00000000000009200, 0.7853981633974447300 ) ; +#63798 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 30.94069092601379400, -28.35186440610857500 ) ) ; +#63799 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 0.0000000000000000000, 13.79444196196998700 ) ) ; +#63800 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576917600, 45.54999999999999000, -28.65220501466659500 ) ) ; +#63801 = AXIS2_PLACEMENT_3D ( 'NONE', #37023, #80564, #43273 ) ; +#63802 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63803 = EDGE_LOOP ( 'NONE', ( #14735, #54913, #64430, #37073 ) ) ; +#63804 = FACE_OUTER_BOUND ( 'NONE', #77248, .T. ) ; +#63805 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#63806 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63807 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701868900, 85.79999999999998300, -28.70555803802997700 ) ) ; +#63808 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224935000, 51.50962196508508100, -28.29483400905883500 ) ) ; +#63809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63811 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78116, #3572, #59638, #22358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794190131600E-007, 0.0009376791149930075900 ), + .UNSPECIFIED. ) ; +#63812 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#63813 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 101.5999999999999900, -1.205558038030003500 ) ) ; +#63814 = EDGE_CURVE ( 'NONE', #7367, #4580, #71932, .T. ) ; +#63815 = FACE_OUTER_BOUND ( 'NONE', #50642, .T. ) ; +#63816 = EDGE_CURVE ( 'NONE', #43447, #52899, #42871, .T. ) ; +#63817 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189000, 28.23827450271715000, -28.47230003642276900 ) ) ; +#63818 = VERTEX_POINT ( 'NONE', #7734 ) ; +#63819 = VERTEX_POINT ( 'NONE', #26547 ) ; +#63820 = ADVANCED_FACE ( 'NONE', ( #59445 ), #51221, .T. ) ; +#63821 = FACE_OUTER_BOUND ( 'NONE', #48762, .T. ) ; +#63822 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 4.333333333333346400, 3.124568980892187500 ) ) ; +#63823 = EDGE_CURVE ( 'NONE', #38287, #561, #61419, .T. ) ; +#63824 = VERTEX_POINT ( 'NONE', #45243 ) ; +#63825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58868, #27362, #3098, #46590 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.853303177097544100E-005, 0.0008082646680356966900 ), + .UNSPECIFIED. ) ; +#63826 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488149600, 79.60439022488343100, -28.70555803803014400 ) ) ; +#63827 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#63828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63829 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#63830 = FACE_OUTER_BOUND ( 'NONE', #47859, .T. ) ; +#63831 = FACE_OUTER_BOUND ( 'NONE', #58922, .T. ) ; +#63832 = EDGE_CURVE ( 'NONE', #9324, #66196, #79894, .T. ) ; +#63833 = ORIENTED_EDGE ( 'NONE', *, *, #45069, .F. ) ; +#63834 = EDGE_CURVE ( 'NONE', #56249, #79198, #57454, .T. ) ; +#63835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63836 = FACE_OUTER_BOUND ( 'NONE', #29850, .T. ) ; +#63837 = VERTEX_POINT ( 'NONE', #64076 ) ; +#63838 = ORIENTED_EDGE ( 'NONE', *, *, #5566, .F. ) ; +#63839 = AXIS2_PLACEMENT_3D ( 'NONE', #47272, #53561, #16307 ) ; +#63840 = EDGE_CURVE ( 'NONE', #51898, #43258, #63358, .T. ) ; +#63841 = EDGE_CURVE ( 'NONE', #56243, #24335, #42968, .T. ) ; +#63842 = EDGE_CURVE ( 'NONE', #68193, #11157, #28574, .T. ) ; +#63843 = ADVANCED_FACE ( 'NONE', ( #9803 ), #45786, .T. ) ; +#63844 = CONICAL_SURFACE ( 'NONE', #46174, 10.00000000000009400, 0.7853981633974447300 ) ; +#63845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63846 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686917200, 81.58005252438302100, -28.24986299608924900 ) ) ; +#63847 = CARTESIAN_POINT ( 'NONE', ( -2.042760264136514800, 75.79999999999982700, -28.53819074160794100 ) ) ; +#63848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63849 = FACE_OUTER_BOUND ( 'NONE', #3790, .T. ) ; +#63850 = EDGE_LOOP ( 'NONE', ( #60880, #49064, #44503 ) ) ; +#63851 = AXIS2_PLACEMENT_3D ( 'NONE', #69449, #32199, #75700 ) ; +#63852 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63853 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851255800, 36.00238095238064800, -28.70555803802995200 ) ) ; +#63854 = VERTEX_POINT ( 'NONE', #77096 ) ; +#63855 = ORIENTED_EDGE ( 'NONE', *, *, #32600, .T. ) ; +#63856 = ORIENTED_EDGE ( 'NONE', *, *, #56541, .F. ) ; +#63857 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000047800, 80.52242369685778600, -28.53861367218625800 ) ) ; +#63858 = ORIENTED_EDGE ( 'NONE', *, *, #25924, .T. ) ; +#63859 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#63860 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63862 = CARTESIAN_POINT ( 'NONE', ( 3.221157914412297700, 9.935236322205879500, -28.30315276798563700 ) ) ; +#63863 = VERTEX_POINT ( 'NONE', #46056 ) ; +#63864 = CONICAL_SURFACE ( 'NONE', #52040, 10.00000000000009400, 0.7853981633974447300 ) ; +#63865 = AXIS2_PLACEMENT_3D ( 'NONE', #28407, #15841, #40856 ) ; +#63866 = AXIS2_PLACEMENT_3D ( 'NONE', #44794, #51060, #13327 ) ; +#63867 = ORIENTED_EDGE ( 'NONE', *, *, #11066, .T. ) ; +#63868 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63869 = AXIS2_PLACEMENT_3D ( 'NONE', #26725, #51674, #39184 ) ; +#63870 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64684, #33653, #58660, #21431 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553836192300E-007, 0.0008759529789578741200 ), + .UNSPECIFIED. ) ; +#63871 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519000, 65.79999999999982700, -28.63843632546338100 ) ) ; +#63872 = CONICAL_SURFACE ( 'NONE', #37245, 10.50000000000009600, 0.7853981633974518300 ) ; +#63873 = ORIENTED_EDGE ( 'NONE', *, *, #25097, .F. ) ; +#63874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63875 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 10.16666666666667300, -3.349151577478988200 ) ) ; +#63876 = CARTESIAN_POINT ( 'NONE', ( 15.12208893941178200, 9.877911060588219900, -28.70506118104238200 ) ) ; +#63877 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922516100, 90.09037803491456500, -28.29483400905907700 ) ) ; +#63878 = ORIENTED_EDGE ( 'NONE', *, *, #79079, .F. ) ; +#63879 = FACE_OUTER_BOUND ( 'NONE', #56748, .T. ) ; +#63880 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63881 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851502700, 44.59761904761904800, -28.70555803802996700 ) ) ; +#63882 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459516700, 82.51973550835644700, -28.70555803803008400 ) ) ; +#63883 = AXIS2_PLACEMENT_3D ( 'NONE', #18911, #62447, #25174 ) ; +#63884 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189932900, 49.12363993080087000, -28.38670679782169200 ) ) ; +#63885 = EDGE_CURVE ( 'NONE', #40831, #65707, #14075, .T. ) ; +#63886 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#63887 = ORIENTED_EDGE ( 'NONE', *, *, #77523, .F. ) ; +#63888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63889 = CARTESIAN_POINT ( 'NONE', ( 3.792055760495317300, 10.40771342879349800, -28.53891855580000200 ) ) ; +#63890 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62673, #19138, #68909, #31666 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962240830300, 0.0005195704752304184000 ), + .UNSPECIFIED. ) ; +#63891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63893 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#63894 = FACE_OUTER_BOUND ( 'NONE', #35999, .T. ) ; +#63895 = ORIENTED_EDGE ( 'NONE', *, *, #32492, .T. ) ; +#63896 = EDGE_CURVE ( 'NONE', #9002, #53406, #40936, .T. ) ; +#63897 = CONICAL_SURFACE ( 'NONE', #69673, 10.50000000000009600, 0.7853981633974518300 ) ; +#63898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63899 = AXIS2_PLACEMENT_3D ( 'NONE', #24847, #68347, #31111 ) ; +#63900 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 49.74722181384564800, -28.70555803802999200 ) ) ; +#63901 = ORIENTED_EDGE ( 'NONE', *, *, #45973, .F. ) ; +#63902 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.43250300240230600, -28.20555803802997700 ) ) ; +#63903 = ORIENTED_EDGE ( 'NONE', *, *, #52344, .T. ) ; +#63904 = CONICAL_SURFACE ( 'NONE', #78585, 10.50000000000009600, 0.7853981633974500600 ) ; +#63905 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #314, #37554, #50048, #12859 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898887000 ), + .UNSPECIFIED. ) ; +#63906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63908 = VERTEX_POINT ( 'NONE', #33581 ) ; +#63907 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.70555803802995200 ) ) ; +#63909 = ADVANCED_FACE ( 'NONE', ( #57475 ), #38950, .F. ) ; +#63910 = CIRCLE ( 'NONE', #78641, 9.500000000000097700 ) ; +#63911 = AXIS2_PLACEMENT_3D ( 'NONE', #15593, #59098, #21848 ) ; +#63912 = CIRCLE ( 'NONE', #15738, 10.00000000000009200 ) ; +#63913 = EDGE_LOOP ( 'NONE', ( #11062, #52299, #14127, #66510 ) ) ; +#63914 = PLANE ( 'NONE', #51408 ) ; +#63915 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#63916 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25435, #19162, #31685, #75192 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697166273400E-007, 0.0008724363063897039500 ), + .UNSPECIFIED. ) ; +#63917 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 71.25732391202370800, -28.20555803803030800 ) ) ; +#63918 = ORIENTED_EDGE ( 'NONE', *, *, #6758, .T. ) ; +#63919 = ORIENTED_EDGE ( 'NONE', *, *, #44230, .F. ) ; +#63920 = ADVANCED_FACE ( 'NONE', ( #72110 ), #5902, .T. ) ; +#63921 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 53.83333333333334300, -6.205558038030004800 ) ) ; +#63922 = AXIS2_PLACEMENT_3D ( 'NONE', #57224, #51179, #13986 ) ; +#63923 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 21.02620220503754200, -28.70555803802994200 ) ) ; +#63924 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.41070809551055000, -28.20555803802994200 ) ) ; +#63925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45080, #38849, #32351, #7850 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852029400, 0.0009376791149930240700 ), + .UNSPECIFIED. ) ; +#63926 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 18.83333333333333900, -9.205558038030003900 ) ) ; +#63927 = CONICAL_SURFACE ( 'NONE', #13719, 10.50000000000009600, 0.7853981633974500600 ) ; +#63928 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158400, 34.09761904761920400, -28.70555803802995200 ) ) ; +#63929 = VERTEX_POINT ( 'NONE', #58864 ) ; +#63930 = CARTESIAN_POINT ( 'NONE', ( -16.84449792284930000, 41.32033471810044000, -28.30868034705253300 ) ) ; +#63931 = EDGE_CURVE ( 'NONE', #47605, #79164, #80389, .T. ) ; +#63932 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .T. ) ; +#63933 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180783100, 79.94924284854681700, -28.20555803803030800 ) ) ; +#63934 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462315400, 80.20590598242361600, -28.39369363572376100 ) ) ; +#63935 = ADVANCED_FACE ( 'NONE', ( #7822 ), #3091, .T. ) ; +#63936 = ORIENTED_EDGE ( 'NONE', *, *, #6727, .T. ) ; +#63937 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 56.16666666666667100, 9.794441961969994300 ) ) ; +#63938 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555922700, 81.87833896172648500, -28.53892303408251500 ) ) ; +#63939 = ORIENTED_EDGE ( 'NONE', *, *, #79178, .T. ) ; +#63940 = CARTESIAN_POINT ( 'NONE', ( -15.90085294043552700, 92.50085294043555000, -28.67510226166322700 ) ) ; +#63941 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.66749699759768400, -28.20555803802994200 ) ) ; +#63942 = CIRCLE ( 'NONE', #41677, 10.50000000000009600 ) ; +#63943 = ORIENTED_EDGE ( 'NONE', *, *, #19277, .F. ) ; +#63944 = ORIENTED_EDGE ( 'NONE', *, *, #64304, .F. ) ; +#63945 = CARTESIAN_POINT ( 'NONE', ( -15.56627166159368700, 29.69809558586063500, -28.70555803803001600 ) ) ; +#63946 = CARTESIAN_POINT ( 'NONE', ( 16.62514415533964400, 9.187427922330183300, -28.57261973208896000 ) ) ; +#63947 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 31.18929190448939400, -28.20555803802996700 ) ) ; +#63948 = ADVANCED_FACE ( 'NONE', ( #24405 ), #37014, .T. ) ; +#63949 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 83.20037755566770000, -28.53664883431660500 ) ) ; +#63950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63952 = CIRCLE ( 'NONE', #54425, 10.50000000000009600 ) ; +#63953 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63954 = EDGE_CURVE ( 'NONE', #9750, #4075, #65946, .T. ) ; +#63955 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#63956 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#63957 = ORIENTED_EDGE ( 'NONE', *, *, #43056, .F. ) ; +#63958 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537199000, 51.25732391202399200, -28.20555803802997700 ) ) ; +#63959 = CONICAL_SURFACE ( 'NONE', #67311, 10.50000000000009400, 0.7853981633974500600 ) ; +#63960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63962 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655543400, 41.67701665379215800, -28.20555803802997400 ) ) ; +#63963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63964 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511912200, 81.99560977511663400, -28.70555803802997700 ) ) ; +#63965 = CONICAL_SURFACE ( 'NONE', #4787, 10.50000000000009600, 0.7853981633974518300 ) ; +#63966 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274716100, 35.04999999999996900, -28.20555803802995200 ) ) ; +#63967 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819191100, 59.94924284854719300, -28.20555803802997700 ) ) ; +#63968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63969 = AXIS2_PLACEMENT_3D ( 'NONE', #8319, #14610, #45562 ) ; +#63970 = EDGE_CURVE ( 'NONE', #46344, #27806, #51414, .T. ) ; +#63971 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 55.79999999999999000, -28.20555803802997700 ) ) ; +#63972 = EDGE_CURVE ( 'NONE', #46838, #76259, #36981, .T. ) ; +#63973 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571919100, 70.07141756547886800, -28.70555803803014400 ) ) ; +#63974 = ORIENTED_EDGE ( 'NONE', *, *, #12180, .F. ) ; +#63975 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17727, #73760, #11748, #55228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418720000, 0.001049055495481835800 ), + .UNSPECIFIED. ) ; +#63976 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 20.49747404049752200, -28.26641963845874300 ) ) ; +#63977 = EDGE_CURVE ( 'NONE', #54070, #561, #22547, .T. ) ; +#63978 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 15.92318720225497800, -28.70555803802992800 ) ) ; +#63979 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571488300, 61.52858243452089900, -28.70555803803014400 ) ) ; +#63980 = AXIS2_PLACEMENT_3D ( 'NONE', #76158, #32648, #44846 ) ; +#63981 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 59.66666666666667100, -5.205558038030003100 ) ) ; +#63982 = FACE_OUTER_BOUND ( 'NONE', #27188, .T. ) ; +#63983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63984 = EDGE_LOOP ( 'NONE', ( #74731, #44178, #80173 ) ) ; +#63985 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 46.72261628933269900, -28.70555803802996700 ) ) ; +#63986 = ORIENTED_EDGE ( 'NONE', *, *, #26191, .F. ) ; +#63987 = ORIENTED_EDGE ( 'NONE', *, *, #79336, .F. ) ; +#63988 = CIRCLE ( 'NONE', #23275, 9.500000000000099500 ) ; +#63989 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 51.62753447840813700, -28.38801640354866900 ) ) ; +#63990 = AXIS2_PLACEMENT_3D ( 'NONE', #2683, #77235, #58736 ) ; +#63991 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 80.34267608797600200, -28.20555803802997700 ) ) ; +#63992 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#63993 = AXIS2_PLACEMENT_3D ( 'NONE', #37300, #18837, #49797 ) ; +#63994 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124986700, 66.46717019299478600, -28.53914313452737500 ) ) ; +#63995 = ORIENTED_EDGE ( 'NONE', *, *, #77526, .T. ) ; +#63996 = EDGE_CURVE ( 'NONE', #47605, #29841, #75967, .T. ) ; +#63997 = AXIS2_PLACEMENT_3D ( 'NONE', #45349, #39105, #57905 ) ; +#63998 = CONICAL_SURFACE ( 'NONE', #15105, 10.50000000000009200, 0.7853981633974482800 ) ; +#63999 = ORIENTED_EDGE ( 'NONE', *, *, #5921, .F. ) ; +#64000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64001 = CARTESIAN_POINT ( 'NONE', ( -16.93476732735787800, 16.45995918884883800, -28.51837550109417300 ) ) ; +#64002 = EDGE_CURVE ( 'NONE', #76283, #23185, #53585, .T. ) ; +#64003 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 24.83333333333334300, 0.9380355014189731800 ) ) ; +#64004 = ORIENTED_EDGE ( 'NONE', *, *, #39913, .T. ) ; +#64005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64006 = AXIS2_PLACEMENT_3D ( 'NONE', #10531, #16786, #60321 ) ; +#64007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55509, #61529, #61789, #24513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795555600 ), + .UNSPECIFIED. ) ; +#64008 = AXIS2_PLACEMENT_3D ( 'NONE', #24817, #68322, #31084 ) ; +#64009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64010 = ADVANCED_FACE ( 'NONE', ( #22443 ), #78464, .T. ) ; +#64011 = CONICAL_SURFACE ( 'NONE', #44726, 10.50000000000009600, 0.7853981633974500600 ) ; +#64012 = CIRCLE ( 'NONE', #60069, 10.00000000000009400 ) ; +#64013 = EDGE_LOOP ( 'NONE', ( #40660, #53152, #17989, #78765 ) ) ; +#64014 = ORIENTED_EDGE ( 'NONE', *, *, #69053, .F. ) ; +#64015 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042476800, 32.09027028261002100, -28.70555803802996000 ) ) ; +#64016 = ORIENTED_EDGE ( 'NONE', *, *, #47, .T. ) ; +#64017 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53975, #16729, #72773, #35517 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671402604500E-007, 0.0007670610367941734800 ), + .UNSPECIFIED. ) ; +#64018 = EDGE_LOOP ( 'NONE', ( #15099, #2956, #3565, #22880 ) ) ; +#64019 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64020 = ADVANCED_FACE ( 'NONE', ( #70106 ), #18538, .T. ) ; +#64021 = CARTESIAN_POINT ( 'NONE', ( 3.371507771243965800, 71.43250300240229900, -28.25053031809460100 ) ) ; +#64022 = ORIENTED_EDGE ( 'NONE', *, *, #29911, .F. ) ; +#64023 = PLANE ( 'NONE', #5242 ) ; +#64024 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 24.55000000000000100, -28.20555803802994200 ) ) ; +#64025 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, -3.833333333333335300, 1.741883078712356500 ) ) ; +#64026 = FACE_OUTER_BOUND ( 'NONE', #30838, .T. ) ; +#64027 = AXIS2_PLACEMENT_3D ( 'NONE', #30426, #61435, #67667 ) ; +#64028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64029 = ORIENTED_EDGE ( 'NONE', *, *, #69982, .T. ) ; +#64030 = ADVANCED_FACE ( 'NONE', ( #51585 ), #66246, .T. ) ; +#64031 = ORIENTED_EDGE ( 'NONE', *, *, #1000, .F. ) ; +#64032 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 65.79999999999998300, -28.20555803802997700 ) ) ; +#64033 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64034 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507544600, 42.02620220503759200, -28.70555803802996700 ) ) ; +#64035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64038 = PLANE ( 'NONE', #25525 ) ; +#64037 = CIRCLE ( 'NONE', #9439, 10.50000000000009600 ) ; +#64039 = AXIS2_PLACEMENT_3D ( 'NONE', #59277, #22033, #65570 ) ; +#64040 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890869900, 80.49763722318499500, -28.32100408376068400 ) ) ; +#64041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64042 = ORIENTED_EDGE ( 'NONE', *, *, #10585, .T. ) ; +#64043 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19444, #62976, #25722, #69211 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278954419700, 0.001517194977238233800 ), + .UNSPECIFIED. ) ; +#64044 = ADVANCED_FACE ( 'NONE', ( #20493 ), #33135, .T. ) ; +#64045 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019100, 81.43250300240214300, -28.20555803803014400 ) ) ; +#64046 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 8.673617379884035500E-016, -18.70555803803001300 ) ) ; +#64047 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 30.66666666666668200, -5.535685056952199400 ) ) ; +#64048 = FACE_OUTER_BOUND ( 'NONE', #48509, .T. ) ; +#64049 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 18.13131911501876600, -28.51286550264506300 ) ) ; +#64050 = ORIENTED_EDGE ( 'NONE', *, *, #57267, .F. ) ; +#64051 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999953500, 61.43250300240195800, -28.20555803803014400 ) ) ; +#64052 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.96823913367204300, -28.70555803802997700 ) ) ; +#64053 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349246600, 50.20543520232829600, -28.70555803802996700 ) ) ; +#64054 = ORIENTED_EDGE ( 'NONE', *, *, #25562, .F. ) ; +#64055 = VERTEX_POINT ( 'NONE', #10445 ) ; +#64056 = CARTESIAN_POINT ( 'NONE', ( -16.23866012341730400, 94.14260110182036100, -28.39616125952509100 ) ) ; +#64057 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.96823913367204300, -28.70555803802997700 ) ) ; +#64058 = ADVANCED_FACE ( 'NONE', ( #35118 ), #21, .T. ) ; +#64059 = VECTOR ( 'NONE', #63829, 1000.000000000000000 ) ; +#64060 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378051200, 50.77483928597539600, -28.57108397021911700 ) ) ; +#64061 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 36.94142842854297000, -28.20555803802995200 ) ) ; +#64062 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 75.92347538298001600, -28.70555803802997700 ) ) ; +#64063 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528424400, 28.63131911501858400, -28.51286550264480400 ) ) ; +#64064 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567171400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#64065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64066 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49603, #24903, #68409, #31172, #74676, #37370, #126, #43624 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001725689008353779800, 0.002588533512530668600, 0.003451378016707557800 ), + .UNSPECIFIED. ) ; +#64067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64069 = CIRCLE ( 'NONE', #15588, 10.50000000000009600 ) ; +#64071 = EDGE_CURVE ( 'NONE', #11944, #39538, #8047, .T. ) ; +#64070 = ORIENTED_EDGE ( 'NONE', *, *, #64323, .F. ) ; +#64072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64073 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64074 = EDGE_CURVE ( 'NONE', #66821, #74017, #74417, .T. ) ; +#64075 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64076 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#64077 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#64078 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344325100, 41.67701665379241400, -28.20555803802997400 ) ) ; +#64079 = ORIENTED_EDGE ( 'NONE', *, *, #52827, .F. ) ; +#64080 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64081 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64082 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 70.13716795162659400, -28.48697406221667400 ) ) ; +#64083 = EDGE_CURVE ( 'NONE', #2167, #39327, #59960, .T. ) ; +#64084 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#64085 = CONICAL_SURFACE ( 'NONE', #14970, 10.50000000000009600, 0.7853981633974482800 ) ; +#64086 = EDGE_CURVE ( 'NONE', #12648, #80546, #45422, .T. ) ; +#64087 = FACE_OUTER_BOUND ( 'NONE', #62502, .T. ) ; +#64088 = ORIENTED_EDGE ( 'NONE', *, *, #27245, .T. ) ; +#64089 = AXIS2_PLACEMENT_3D ( 'NONE', #62182, #50163, #31456 ) ; +#64090 = ORIENTED_EDGE ( 'NONE', *, *, #53186, .F. ) ; +#64091 = ORIENTED_EDGE ( 'NONE', *, *, #34318, .T. ) ; +#64092 = VERTEX_POINT ( 'NONE', #4705 ) ; +#64093 = ORIENTED_EDGE ( 'NONE', *, *, #78391, .T. ) ; +#64094 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42597, #55113, #61416, #24134 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647097027500E-007, 0.0007596411030282485000 ), + .UNSPECIFIED. ) ; +#64095 = EDGE_LOOP ( 'NONE', ( #25517, #67857, #22796 ) ) ; +#64097 = ORIENTED_EDGE ( 'NONE', *, *, #71203, .F. ) ; +#64096 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64098 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 2.166666666666683400, -6.205558038030004800 ) ) ; +#64099 = VERTEX_POINT ( 'NONE', #35732 ) ; +#64100 = AXIS2_PLACEMENT_3D ( 'NONE', #53644, #16399, #59922 ) ; +#64101 = EDGE_CURVE ( 'NONE', #51112, #15003, #31029, .T. ) ; +#64102 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64103 = EDGE_CURVE ( 'NONE', #69715, #26859, #16598, .T. ) ; +#64104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64105 = EDGE_CURVE ( 'NONE', #49049, #12464, #16572, .T. ) ; +#64106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64107 = AXIS2_PLACEMENT_3D ( 'NONE', #10489, #78776, #41477 ) ; +#64108 = ORIENTED_EDGE ( 'NONE', *, *, #16663, .F. ) ; +#64109 = CARTESIAN_POINT ( 'NONE', ( 17.36049707220281500, 30.93250300240229200, -28.25438406275898700 ) ) ; +#64110 = FACE_OUTER_BOUND ( 'NONE', #57092, .T. ) ; +#64111 = AXIS2_PLACEMENT_3D ( 'NONE', #61922, #36853, #68154 ) ; +#64112 = ORIENTED_EDGE ( 'NONE', *, *, #26328, .T. ) ; +#64113 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428564100, 41.52858243452107000, -28.70555803802997700 ) ) ; +#64114 = CARTESIAN_POINT ( 'NONE', ( 17.15784271410172600, 71.13951010012863200, -28.36889022317260300 ) ) ; +#64115 = ORIENTED_EDGE ( 'NONE', *, *, #78982, .F. ) ; +#64116 = AXIS2_PLACEMENT_3D ( 'NONE', #33043, #76547, #39276 ) ; +#64117 = CONICAL_SURFACE ( 'NONE', #15653, 10.50000000000009400, 0.7853981633974500600 ) ; +#64118 = EDGE_CURVE ( 'NONE', #5879, #26238, #2063, .T. ) ; +#64119 = AXIS2_PLACEMENT_3D ( 'NONE', #64128, #26843, #70336 ) ; +#64120 = AXIS2_PLACEMENT_3D ( 'NONE', #22104, #71887, #59360 ) ; +#64121 = ORIENTED_EDGE ( 'NONE', *, *, #64820, .T. ) ; +#64122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64123 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466624000, 19.76893971291457000, -28.57333386111661300 ) ) ; +#64125 = EDGE_LOOP ( 'NONE', ( #56176, #34495, #58113, #19918, #22650, #22584, #78497, #25832 ) ) ; +#64124 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510340700, 30.94069092601377900, -28.35186440610858200 ) ) ; +#64126 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#64127 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64128 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#64129 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#64130 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 51.82440674572815500, -28.45987523529581900 ) ) ; +#64131 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801594600, 50.90033558196089600, -28.70555803803014400 ) ) ; +#64132 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925629900, 10.78032162676581900, -28.55467576046953900 ) ) ; +#64133 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64134 = CIRCLE ( 'NONE', #77584, 10.00000000000009200 ) ; +#64135 = ORIENTED_EDGE ( 'NONE', *, *, #13800, .F. ) ; +#64136 = ADVANCED_FACE ( 'NONE', ( #74047 ), #73535, .T. ) ; +#64137 = AXIS2_PLACEMENT_3D ( 'NONE', #71522, #34254, #77758 ) ; +#64138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64139 = EDGE_LOOP ( 'NONE', ( #36958, #74142, #52202 ) ) ; +#64140 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 12.39610994602603400, -28.37519436813180100 ) ) ; +#64141 = CARTESIAN_POINT ( 'NONE', ( 11.51258998854850000, 60.12140959736004900, -28.55996453402194700 ) ) ; +#64142 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949263700, 28.07379779496234900, -28.70555803802994200 ) ) ; +#64143 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#64144 = ADVANCED_FACE ( 'NONE', ( #3931 ), #14646, .F. ) ; +#64145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64146 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39294, #45523, #8271, #51785 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283328209000, 0.0007287255810278900300 ), + .UNSPECIFIED. ) ; +#64147 = ADVANCED_FACE ( 'NONE', ( #68171 ), #62337, .T. ) ; +#64148 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 20.25489551879203600, -28.37193179497694500 ) ) ; +#64149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64150 = AXIS2_PLACEMENT_3D ( 'NONE', #78619, #28596, #10327 ) ; +#64151 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725653300, 33.16464174796072900, -28.53896444442200000 ) ) ; +#64152 = CIRCLE ( 'NONE', #20239, 9.500000000000099500 ) ; +#64153 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 8.000000000000007100, -1.205558038030005300 ) ) ; +#64154 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000001100, 29.75227248018356000, -28.70555803802998100 ) ) ; +#64155 = FACE_OUTER_BOUND ( 'NONE', #76676, .T. ) ; +#64156 = ORIENTED_EDGE ( 'NONE', *, *, #21655, .T. ) ; +#64157 = ORIENTED_EDGE ( 'NONE', *, *, #38930, .F. ) ; +#64158 = CARTESIAN_POINT ( 'NONE', ( 3.535187653983306700, 9.406791769321852600, -28.68794773163824300 ) ) ; +#64159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64160 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269608800, 61.58737389638860500, -28.29936525552440000 ) ) ; +#64161 = AXIS2_PLACEMENT_3D ( 'NONE', #21150, #64674, #27413 ) ; +#64162 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64163 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 81.62753447840887600, -28.38801640354855100 ) ) ; +#64164 = EDGE_CURVE ( 'NONE', #3423, #42911, #68404, .T. ) ; +#64165 = VECTOR ( 'NONE', #11682, 1000.000000000000000 ) ; +#64166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64167 = ORIENTED_EDGE ( 'NONE', *, *, #26095, .T. ) ; +#64168 = CONICAL_SURFACE ( 'NONE', #45820, 10.50000000000009600, 0.7853981633974500600 ) ; +#64169 = ORIENTED_EDGE ( 'NONE', *, *, #78628, .F. ) ; +#64170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64171 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .F. ) ; +#64172 = AXIS2_PLACEMENT_3D ( 'NONE', #14432, #7887, #57943 ) ; +#64173 = ORIENTED_EDGE ( 'NONE', *, *, #58072, .T. ) ; +#64174 = CONICAL_SURFACE ( 'NONE', #72092, 10.00000000000009200, 0.7853981633974447300 ) ; +#64175 = ORIENTED_EDGE ( 'NONE', *, *, #62038, .F. ) ; +#64176 = ORIENTED_EDGE ( 'NONE', *, *, #48060, .T. ) ; +#64177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64178 = ORIENTED_EDGE ( 'NONE', *, *, #54881, .F. ) ; +#64179 = ORIENTED_EDGE ( 'NONE', *, *, #33441, .F. ) ; +#64180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64181 = ORIENTED_EDGE ( 'NONE', *, *, #45632, .F. ) ; +#64182 = ORIENTED_EDGE ( 'NONE', *, *, #16759, .T. ) ; +#64183 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#64184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64185 = ORIENTED_EDGE ( 'NONE', *, *, #31189, .T. ) ; +#64186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64187 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64188 = ORIENTED_EDGE ( 'NONE', *, *, #11853, .F. ) ; +#64189 = FACE_OUTER_BOUND ( 'NONE', #70071, .T. ) ; +#64190 = EDGE_CURVE ( 'NONE', #20926, #67594, #53944, .T. ) ; +#64192 = ORIENTED_EDGE ( 'NONE', *, *, #2412, .F. ) ; +#64191 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 9.968680884981225200, -28.51286550264508800 ) ) ; +#64193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64194 = ORIENTED_EDGE ( 'NONE', *, *, #7529, .F. ) ; +#64195 = EDGE_LOOP ( 'NONE', ( #64480, #6216, #79718 ) ) ; +#64196 = EDGE_CURVE ( 'NONE', #60591, #73343, #1963, .T. ) ; +#64198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64197 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2394, #58168, #14663, #45895 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210951400, 0.001517199873936106300 ), + .UNSPECIFIED. ) ; +#64199 = CARTESIAN_POINT ( 'NONE', ( -4.720766503057952900, 80.09951448976264000, -28.63282631410025700 ) ) ; +#64200 = FACE_OUTER_BOUND ( 'NONE', #3525, .T. ) ; +#64201 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 51.66666666666667100, 3.124568980892192800 ) ) ; +#64202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64204 = EDGE_CURVE ( 'NONE', #23348, #17822, #39472, .T. ) ; +#64205 = ORIENTED_EDGE ( 'NONE', *, *, #61376, .F. ) ; +#64206 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547800, 80.16054007504448000, -28.34042301926906000 ) ) ; +#64207 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 16.66666666666668200, 5.722645192245505700 ) ) ; +#64208 = EDGE_CURVE ( 'NONE', #57451, #65256, #25032, .T. ) ; +#64209 = AXIS2_PLACEMENT_3D ( 'NONE', #51333, #14124, #57627 ) ; +#64210 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64211 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64212 = CONICAL_SURFACE ( 'NONE', #69711, 10.00000000000009200, 0.7853981633974447300 ) ; +#64213 = ORIENTED_EDGE ( 'NONE', *, *, #61483, .T. ) ; +#64214 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 73.20037755566821100, -28.53664883431611800 ) ) ; +#64215 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567158500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#64216 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 54.00000000000001400, -12.20555803803000200 ) ) ; +#64217 = ORIENTED_EDGE ( 'NONE', *, *, #64719, .F. ) ; +#64218 = ORIENTED_EDGE ( 'NONE', *, *, #3538, .F. ) ; +#64219 = AXIS2_PLACEMENT_3D ( 'NONE', #28878, #16591, #78618 ) ; +#64220 = EDGE_CURVE ( 'NONE', #40018, #68363, #78901, .T. ) ; +#64221 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148544600, 25.50238095238091800, -28.70555803802994200 ) ) ; +#64222 = EDGE_CURVE ( 'NONE', #29376, #25647, #64302, .T. ) ; +#64223 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 90.16054007504432400, -28.34042301926905700 ) ) ; +#64224 = EDGE_CURVE ( 'NONE', #79978, #50710, #49637, .T. ) ; +#64225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64226 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567154100, 20.24660241562189000, -28.20555803802994200 ) ) ; +#64227 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 53.20037755566824000, -28.53664883431610400 ) ) ; +#64228 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64229 = AXIS2_PLACEMENT_3D ( 'NONE', #25020, #68541, #31281 ) ; +#64230 = FACE_OUTER_BOUND ( 'NONE', #66602, .T. ) ; +#64231 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000091500, 15.94142842854307000, -28.20555803802992800 ) ) ; +#64232 = CONICAL_SURFACE ( 'NONE', #24912, 10.00000000000009400, 0.7853981633974447300 ) ; +#64233 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662742047500, 77.93535825203905200, -28.53896444442206400 ) ) ; +#64234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64235 = ORIENTED_EDGE ( 'NONE', *, *, #59295, .T. ) ; +#64236 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528430600, 39.13131911501858400, -28.51286550264481800 ) ) ; +#64237 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466641400, 9.268939712914631800, -28.57333386111658400 ) ) ; +#64238 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#64239 = EDGE_CURVE ( 'NONE', #27460, #42672, #47692, .T. ) ; +#64240 = ADVANCED_FACE ( 'NONE', ( #45728 ), #31098, .T. ) ; +#64241 = AXIS2_PLACEMENT_3D ( 'NONE', #24852, #68359, #31122 ) ; +#64242 = AXIS2_PLACEMENT_3D ( 'NONE', #67909, #30660, #74186 ) ; +#64243 = EDGE_LOOP ( 'NONE', ( #78109, #71681, #38118, #61330 ) ) ; +#64244 = CONICAL_SURFACE ( 'NONE', #36763, 10.00000000000009200, 0.7853981633974447300 ) ; +#64245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64246 = ORIENTED_EDGE ( 'NONE', *, *, #16560, .T. ) ; +#64247 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64248 = CONICAL_SURFACE ( 'NONE', #29707, 10.00000000000009200, 0.7853981633974447300 ) ; +#64249 = ORIENTED_EDGE ( 'NONE', *, *, #43305, .F. ) ; +#64250 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 57.50000000000000700, 4.650848422521012700 ) ) ; +#64251 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469700, 35.04999999999999700, -28.20555803802995200 ) ) ; +#64252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54092, #10592, #54352, #17115 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693209261600E-007, 0.0008724363063896963600 ), + .UNSPECIFIED. ) ; +#64254 = CONICAL_SURFACE ( 'NONE', #4266, 10.50000000000009600, 0.7853981633974500600 ) ; +#64255 = EDGE_LOOP ( 'NONE', ( #58284, #67333, #25672, #18371, #22946 ) ) ; +#64256 = ORIENTED_EDGE ( 'NONE', *, *, #12709, .T. ) ; +#64257 = ORIENTED_EDGE ( 'NONE', *, *, #14826, .T. ) ; +#64258 = ORIENTED_EDGE ( 'NONE', *, *, #45872, .T. ) ; +#64259 = ORIENTED_EDGE ( 'NONE', *, *, #16631, .T. ) ; +#64260 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57534, #14017, #70027, #32768 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248712844900, 0.0006725414583636246400 ), + .UNSPECIFIED. ) ; +#64261 = ORIENTED_EDGE ( 'NONE', *, *, #30486, .T. ) ; +#64262 = PLANE ( 'NONE', #49857 ) ; +#64263 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64264 = AXIS2_PLACEMENT_3D ( 'NONE', #30034, #73518, #36248 ) ; +#64266 = VERTEX_POINT ( 'NONE', #31363 ) ; +#64265 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466623300, 18.83106028708477500, -28.57333386111661300 ) ) ; +#64267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64268 = ADVANCED_FACE ( 'NONE', ( #76916 ), #74872, .T. ) ; +#64269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55068, #11581, #61374, #24092 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649423613700E-007, 0.0007596411030283394700 ), + .UNSPECIFIED. ) ; +#64270 = AXIS2_PLACEMENT_3D ( 'NONE', #46927, #65233, #77975 ) ; +#64271 = ORIENTED_EDGE ( 'NONE', *, *, #33790, .T. ) ; +#64272 = CIRCLE ( 'NONE', #1016, 10.00000000000009200 ) ; +#64273 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#64274 = ORIENTED_EDGE ( 'NONE', *, *, #52335, .F. ) ; +#64275 = ORIENTED_EDGE ( 'NONE', *, *, #34543, .T. ) ; +#64276 = EDGE_CURVE ( 'NONE', #114, #2651, #10574, .T. ) ; +#64277 = ORIENTED_EDGE ( 'NONE', *, *, #23832, .T. ) ; +#64278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64279 = AXIS2_PLACEMENT_3D ( 'NONE', #55311, #67846, #36543 ) ; +#64280 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#64281 = CIRCLE ( 'NONE', #50360, 10.00000000000009200 ) ; +#64282 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 22.66666666666667500, -5.205558038030003100 ) ) ; +#64283 = AXIS2_PLACEMENT_3D ( 'NONE', #32912, #57667, #70172 ) ; +#64284 = VERTEX_POINT ( 'NONE', #6324 ) ; +#64285 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39974, #65020, #2969, #46452 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635049015000E-007, 0.0008082706238602437800 ), + .UNSPECIFIED. ) ; +#64286 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64287 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 83.67681279774444600, -28.70555803803047500 ) ) ; +#64288 = ORIENTED_EDGE ( 'NONE', *, *, #28240, .F. ) ; +#64289 = AXIS2_PLACEMENT_3D ( 'NONE', #986, #19514, #32019 ) ; +#64290 = FACE_OUTER_BOUND ( 'NONE', #10400, .T. ) ; +#64292 = ORIENTED_EDGE ( 'NONE', *, *, #48771, .T. ) ; +#64291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64293 = ORIENTED_EDGE ( 'NONE', *, *, #11667, .T. ) ; +#64294 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64295 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174765400, 71.43945992495534400, -28.34042301926881900 ) ) ; +#64296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20202, #75948, #63468, #26484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760840939900, 0.0007596411030283546500 ), + .UNSPECIFIED. ) ; +#64298 = CARTESIAN_POINT ( 'NONE', ( 10.22115791441229300, 30.93523632220588100, -28.30315276798566200 ) ) ; +#64299 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#64300 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 66.16666666666670000, -3.349151577478988200 ) ) ; +#64301 = EDGE_CURVE ( 'NONE', #68073, #28184, #76880, .T. ) ; +#64302 = CIRCLE ( 'NONE', #2577, 10.50000000000009800 ) ; +#64303 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 90.34267608797600200, -28.20555803802997700 ) ) ; +#64304 = EDGE_CURVE ( 'NONE', #3423, #44565, #62426, .T. ) ; +#64305 = VERTEX_POINT ( 'NONE', #580 ) ; +#64306 = ORIENTED_EDGE ( 'NONE', *, *, #35700, .F. ) ; +#64307 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64308 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567176700, 20.24660241562181900, -28.20555803802994200 ) ) ; +#64309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64311 = CARTESIAN_POINT ( 'NONE', ( 4.266526781883571000, 20.39435118792235700, -28.41114655922299500 ) ) ; +#64312 = CARTESIAN_POINT ( 'NONE', ( -5.148153789003688800, 65.79999999999998300, -28.37148172714571000 ) ) ; +#64313 = EDGE_CURVE ( 'NONE', #30245, #64775, #31203, .T. ) ; +#64314 = ADVANCED_FACE ( 'NONE', ( #60403 ), #58424, .F. ) ; +#64315 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64316 = CIRCLE ( 'NONE', #8036, 10.00000000000009600 ) ; +#64317 = ORIENTED_EDGE ( 'NONE', *, *, #44129, .F. ) ; +#64318 = CARTESIAN_POINT ( 'NONE', ( -24.10521839401724600, 5.447390802991303200, -22.88564861210971600 ) ) ; +#64319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64320 = VERTEX_POINT ( 'NONE', #7110 ) ; +#64321 = EDGE_CURVE ( 'NONE', #79395, #55473, #74971, .T. ) ; +#64322 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 28.50000000000001100, 2.454695999814385600 ) ) ; +#64323 = EDGE_CURVE ( 'NONE', #80393, #2862, #47926, .T. ) ; +#64324 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64325 = CARTESIAN_POINT ( 'NONE', ( 3.639407206442454500, 18.16749699759769100, -28.25435056028479200 ) ) ; +#64326 = ORIENTED_EDGE ( 'NONE', *, *, #31888, .F. ) ; +#64327 = CIRCLE ( 'NONE', #29809, 9.500000000000101300 ) ; +#64328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64329 = EDGE_LOOP ( 'NONE', ( #64801, #34601, #50230, #76223, #2514 ) ) ; +#64330 = ORIENTED_EDGE ( 'NONE', *, *, #23744, .T. ) ; +#64331 = EDGE_LOOP ( 'NONE', ( #22351, #74616, #46710, #72132 ) ) ; +#64332 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 88.17143691309409800, -28.36981695106780400 ) ) ; +#64333 = VERTEX_POINT ( 'NONE', #44596 ) ; +#64334 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64335 = ORIENTED_EDGE ( 'NONE', *, *, #79797, .T. ) ; +#64336 = CARTESIAN_POINT ( 'NONE', ( -15.88358847659810800, 20.44848545219209200, -28.67627428870334000 ) ) ; +#64337 = ADVANCED_FACE ( 'NONE', ( #12706 ), #8747, .F. ) ; +#64338 = CARTESIAN_POINT ( 'NONE', ( 3.040268958506426900, 30.87561462481244900, -28.30309985153374800 ) ) ; +#64339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64340 = AXIS2_PLACEMENT_3D ( 'NONE', #33743, #77253, #39987 ) ; +#64341 = CARTESIAN_POINT ( 'NONE', ( -11.56182508409088100, 30.98385710212512100, -28.57719681746177900 ) ) ; +#64342 = EDGE_CURVE ( 'NONE', #61724, #26321, #33501, .T. ) ; +#64343 = EDGE_CURVE ( 'NONE', #19202, #73931, #19026, .T. ) ; +#64344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#64345 = EDGE_CURVE ( 'NONE', #80471, #4762, #4577, .T. ) ; +#64346 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 30.93250300240228900, -28.20555803802996700 ) ) ; +#64347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64348 = CARTESIAN_POINT ( 'NONE', ( 9.373516431940519300, 92.66042437177418400, -28.66312194083703300 ) ) ; +#64349 = CARTESIAN_POINT ( 'NONE', ( 11.95723973586456300, 75.79999999999950000, -28.53819074160733700 ) ) ; +#64350 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64351 = CIRCLE ( 'NONE', #18197, 10.50000000000009600 ) ; +#64352 = AXIS2_PLACEMENT_3D ( 'NONE', #55806, #18566, #62096 ) ; +#64353 = ORIENTED_EDGE ( 'NONE', *, *, #40673, .T. ) ; +#64354 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387503100, 65.13282980700456900, -28.53914313452793600 ) ) ; +#64355 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244500, 40.89456479767167000, -28.70555803802996700 ) ) ; +#64356 = ORIENTED_EDGE ( 'NONE', *, *, #35832, .F. ) ; +#64357 = ADVANCED_FACE ( 'NONE', ( #25344 ), #51119, .T. ) ; +#64358 = EDGE_LOOP ( 'NONE', ( #22320, #45910, #20818, #13549 ) ) ; +#64359 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#64360 = ORIENTED_EDGE ( 'NONE', *, *, #20941, .F. ) ; +#64361 = ORIENTED_EDGE ( 'NONE', *, *, #72711, .T. ) ; +#64362 = EDGE_LOOP ( 'NONE', ( #25529, #32589, #75165 ) ) ; +#64363 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658251700, 28.65151454780961500, -28.67627428870437400 ) ) ; +#64364 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965630000, 38.92298334620783600, -28.20555803802995200 ) ) ; +#64365 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 81.68929190448862700, -28.20555803803030800 ) ) ; +#64366 = CIRCLE ( 'NONE', #55045, 10.00000000000009200 ) ; +#64367 = AXIS2_PLACEMENT_3D ( 'NONE', #77483, #40205, #2949 ) ; +#64368 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#64369 = AXIS2_PLACEMENT_3D ( 'NONE', #48221, #11006, #54508 ) ; +#64370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64371 = VERTEX_POINT ( 'NONE', #1654 ) ; +#64372 = AXIS2_PLACEMENT_3D ( 'NONE', #61938, #24662, #68167 ) ; +#64373 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64374 = ADVANCED_FACE ( 'NONE', ( #27300 ), #39923, .F. ) ; +#64375 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27040, #64312, #45739, #8490 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215299801600E-007, 0.0007606633682806883500 ), + .UNSPECIFIED. ) ; +#64376 = CIRCLE ( 'NONE', #23264, 10.00000000000009200 ) ; +#64377 = ORIENTED_EDGE ( 'NONE', *, *, #26174, .T. ) ; +#64378 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#64379 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5560, #36294, #18069, #61613 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279243833981100E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#64380 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 2.081668171172168200E-014, 3.794441961969998300 ) ) ; +#64381 = AXIS2_PLACEMENT_3D ( 'NONE', #46742, #9499, #53007 ) ; +#64382 = EDGE_CURVE ( 'NONE', #28672, #76201, #56457, .T. ) ; +#64383 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75733, #32234, #44686, #7461 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004037369524544153600, 0.004408558665409631000 ), + .UNSPECIFIED. ) ; +#64384 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#64385 = CARTESIAN_POINT ( 'NONE', ( 5.354186913874758400, 56.46717019299491400, -28.53914313452766300 ) ) ; +#64386 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 90.16749699759755300, -28.20555803803030800 ) ) ; +#64387 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64388 = EDGE_CURVE ( 'NONE', #39588, #36988, #29286, .T. ) ; +#64389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74646, #43596, #62396, #25138 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471843412342800E-007, 0.0002673661861287413800 ), + .UNSPECIFIED. ) ; +#64390 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ; +#64391 = EDGE_LOOP ( 'NONE', ( #23376, #74607, #8707, #15819 ) ) ; +#64392 = AXIS2_PLACEMENT_3D ( 'NONE', #20628, #64159, #26881 ) ; +#64393 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64394 = ORIENTED_EDGE ( 'NONE', *, *, #10466, .T. ) ; +#64395 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65101, #52260, #77308, #27840 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925652115300E-007, 0.0004084731003439171100 ), + .UNSPECIFIED. ) ; +#64396 = CARTESIAN_POINT ( 'NONE', ( -1.298286669309697500, 9.866394758536051400, -28.70555803803002000 ) ) ; +#64397 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 71.43650294695081000, -28.30782889147504400 ) ) ; +#64398 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999962000, 64.13556610137270300, -28.54207364681991900 ) ) ; +#64399 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 43.50000000000000700, -9.258116921287651700 ) ) ; +#64400 = FACE_OUTER_BOUND ( 'NONE', #74939, .T. ) ; +#64401 = EDGE_LOOP ( 'NONE', ( #63640, #80100, #69205, #66791 ) ) ; +#64402 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64403 = AXIS2_PLACEMENT_3D ( 'NONE', #63344, #26078, #69558 ) ; +#64404 = EDGE_LOOP ( 'NONE', ( #25313, #2776, #66859, #30308 ) ) ; +#64405 = CONICAL_SURFACE ( 'NONE', #56815, 10.50000000000009600, 0.7853981633974482800 ) ; +#64406 = ORIENTED_EDGE ( 'NONE', *, *, #540, .T. ) ; +#64407 = ORIENTED_EDGE ( 'NONE', *, *, #11339, .F. ) ; +#64408 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64410 = ORIENTED_EDGE ( 'NONE', *, *, #60160, .T. ) ; +#64411 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 60.07141756547892400, -28.70555803802997700 ) ) ; +#64412 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571434200, 49.57141756547891700, -28.70555803802996700 ) ) ; +#64413 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#64414 = ORIENTED_EDGE ( 'NONE', *, *, #20830, .T. ) ; +#64415 = FACE_OUTER_BOUND ( 'NONE', #12493, .T. ) ; +#64416 = ADVANCED_FACE ( 'NONE', ( #43789 ), #20449, .T. ) ; +#64417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64419 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079861300, 70.16616330387837800, -28.27375072930982800 ) ) ; +#64420 = ORIENTED_EDGE ( 'NONE', *, *, #3647, .T. ) ; +#64421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64422 = VECTOR ( 'NONE', #50586, 1000.000000000000000 ) ; +#64423 = EDGE_CURVE ( 'NONE', #5350, #17804, #70887, .T. ) ; +#64424 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 5.833333333333356100, 0.9380355014189731800 ) ) ; +#64425 = ORIENTED_EDGE ( 'NONE', *, *, #23195, .T. ) ; +#64426 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 60.34267608797601700, -28.20555803802997700 ) ) ; +#64427 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#64428 = ORIENTED_EDGE ( 'NONE', *, *, #48262, .T. ) ; +#64429 = ORIENTED_EDGE ( 'NONE', *, *, #12887, .T. ) ; +#64430 = ORIENTED_EDGE ( 'NONE', *, *, #35449, .T. ) ; +#64431 = ORIENTED_EDGE ( 'NONE', *, *, #13205, .T. ) ; +#64432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64433 = LINE ( 'NONE', #68880, #37140 ) ; +#64434 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567157600, 28.85339758437810400, -28.20555803802994200 ) ) ; +#64435 = ADVANCED_FACE ( 'NONE', ( #41862 ), #37948, .F. ) ; +#64436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64438 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60378, #66616, #17112, #60639 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649382456400E-007, 0.0007596411030283380600 ), + .UNSPECIFIED. ) ; +#64439 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64441 = CARTESIAN_POINT ( 'NONE', ( 12.10011726479568800, 24.55000000000000100, -28.53808257741932100 ) ) ; +#64442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64443 = EDGE_CURVE ( 'NONE', #42777, #29510, #54513, .T. ) ; +#64444 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 20.46868088498121800, -28.51286550264509900 ) ) ; +#64445 = EDGE_CURVE ( 'NONE', #56416, #18144, #23386, .T. ) ; +#64446 = CIRCLE ( 'NONE', #54479, 10.50000000000009600 ) ; +#64447 = VERTEX_POINT ( 'NONE', #70734 ) ; +#64449 = VERTEX_POINT ( 'NONE', #52207 ) ; +#64448 = ADVANCED_FACE ( 'NONE', ( #10746 ), #52535, .F. ) ; +#64450 = CARTESIAN_POINT ( 'NONE', ( 5.845440194374214500E-015, 47.67143691309408400, -28.36981695106779700 ) ) ; +#64451 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64454 = AXIS2_PLACEMENT_3D ( 'NONE', #67791, #30552, #74057 ) ; +#64455 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.62753447840889000, -28.38801640354855800 ) ) ; +#64456 = EDGE_CURVE ( 'NONE', #53544, #43689, #69108, .T. ) ; +#64457 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725291500, 35.05000000000000400, -28.20555803802995200 ) ) ; +#64458 = EDGE_CURVE ( 'NONE', #75334, #76799, #56422, .T. ) ; +#64459 = CARTESIAN_POINT ( 'NONE', ( 3.382710778154773800E-014, 52.97376207875062400, -28.70555803802997700 ) ) ; +#64460 = ADVANCED_FACE ( 'NONE', ( #73034 ), #2912, .F. ) ; +#64461 = EDGE_CURVE ( 'NONE', #51524, #37752, #19480, .T. ) ; +#64462 = AXIS2_PLACEMENT_3D ( 'NONE', #72278, #78802, #41504 ) ; +#64463 = CARTESIAN_POINT ( 'NONE', ( -9.997971278275736400, 30.81091476818473000, -28.25432823872346000 ) ) ; +#64464 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306343500, 20.59789380924876300, -28.25343951603341400 ) ) ; +#64465 = ORIENTED_EDGE ( 'NONE', *, *, #3445, .T. ) ; +#64466 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000002700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#64467 = ORIENTED_EDGE ( 'NONE', *, *, #38997, .T. ) ; +#64468 = ADVANCED_FACE ( 'NONE', ( #6824 ), #34069, .F. ) ; +#64469 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 49.50000000000000700, -4.865812075874393000 ) ) ; +#64470 = AXIS2_PLACEMENT_3D ( 'NONE', #62157, #62418, #49591 ) ; +#64471 = AXIS2_PLACEMENT_3D ( 'NONE', #65745, #28507, #72002 ) ; +#64472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64473 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24483, #80239, #36969, #80513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141654606100 ), + .UNSPECIFIED. ) ; +#64474 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 30.96868088498121800, -28.51286550264512000 ) ) ; +#64475 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 14.50000000000000900, -7.061964498581022400 ) ) ; +#64476 = FACE_OUTER_BOUND ( 'NONE', #20689, .T. ) ; +#64477 = ORIENTED_EDGE ( 'NONE', *, *, #9949, .F. ) ; +#64478 = CONICAL_SURFACE ( 'NONE', #14414, 10.00000000000009600, 0.7853981633974482800 ) ; +#64479 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#64480 = ORIENTED_EDGE ( 'NONE', *, *, #33891, .T. ) ; +#64481 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462657100, 61.25732391202388500, -28.20555803803014400 ) ) ; +#64482 = VERTEX_POINT ( 'NONE', #52772 ) ; +#64483 = CONICAL_SURFACE ( 'NONE', #44720, 10.50000000000009600, 0.7853981633974500600 ) ; +#64484 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 51.83333333333332900, 9.794441961969999600 ) ) ; +#64485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15804, #34594, #78090, #40824 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389852407300E-007, 0.0008082646680357287800 ), + .UNSPECIFIED. ) ; +#64486 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64487 = ORIENTED_EDGE ( 'NONE', *, *, #5040, .F. ) ; +#64488 = EDGE_LOOP ( 'NONE', ( #61048, #75845, #25445 ) ) ; +#64489 = ORIENTED_EDGE ( 'NONE', *, *, #9738, .T. ) ; +#64490 = AXIS2_PLACEMENT_3D ( 'NONE', #32687, #76198, #38924 ) ; +#64491 = EDGE_CURVE ( 'NONE', #10841, #44285, #50572, .T. ) ; +#64492 = CONICAL_SURFACE ( 'NONE', #6656, 10.00000000000009400, 0.7853981633974447300 ) ; +#64493 = CARTESIAN_POINT ( 'NONE', ( 4.449420941854242500, 90.93286564902753400, -28.65428819219304300 ) ) ; +#64494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64495 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 70.16054007504466500, -28.34042301926881200 ) ) ; +#64496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64497 = ORIENTED_EDGE ( 'NONE', *, *, #54264, .T. ) ; +#64498 = ORIENTED_EDGE ( 'NONE', *, *, #52217, .T. ) ; +#64499 = CIRCLE ( 'NONE', #35834, 10.50000000000009600 ) ; +#64500 = ORIENTED_EDGE ( 'NONE', *, *, #5558, .F. ) ; +#64501 = CARTESIAN_POINT ( 'NONE', ( 10.53518765398347900, 9.406791769321794000, -28.68794773163823600 ) ) ; +#64502 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 77.60073525436762100, -28.70555803803007700 ) ) ; +#64503 = EDGE_CURVE ( 'NONE', #55826, #12827, #36028, .T. ) ; +#64504 = ORIENTED_EDGE ( 'NONE', *, *, #61709, .T. ) ; +#64505 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 65.79999999999999700, -28.20555803802997700 ) ) ; +#64506 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717300, 20.24660241562189400, -28.20555803802994200 ) ) ; +#64507 = AXIS2_PLACEMENT_3D ( 'NONE', #6787, #7041, #37769 ) ; +#64508 = ORIENTED_EDGE ( 'NONE', *, *, #63570, .T. ) ; +#64509 = ORIENTED_EDGE ( 'NONE', *, *, #5536, .F. ) ; +#64510 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64511 = FACE_OUTER_BOUND ( 'NONE', #31752, .T. ) ; +#64512 = CARTESIAN_POINT ( 'NONE', ( 12.35418691387520200, 55.13282980700456200, -28.53914313452780900 ) ) ; +#64513 = ORIENTED_EDGE ( 'NONE', *, *, #29430, .F. ) ; +#64514 = CARTESIAN_POINT ( 'NONE', ( -3.639502927797190000, 20.43250300240229600, -28.25438406275897300 ) ) ; +#64515 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#64516 = CONICAL_SURFACE ( 'NONE', #35197, 10.00000000000009600, 0.7853981633974482800 ) ; +#64517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46386, #2902, #15432, #58936 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083080053800E-007, 0.0003101809493108745000 ), + .UNSPECIFIED. ) ; +#64520 = EDGE_LOOP ( 'NONE', ( #3257, #6022, #27145, #45482 ) ) ; +#64521 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504958900, 38.69228657120672900, -28.53891855579988900 ) ) ; +#64522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64523 = AXIS2_PLACEMENT_3D ( 'NONE', #13761, #57244, #20002 ) ; +#64524 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 55.33333333333334300, -8.133761268305512700 ) ) ; +#64525 = FACE_OUTER_BOUND ( 'NONE', #49566, .T. ) ; +#64526 = ORIENTED_EDGE ( 'NONE', *, *, #39118, .F. ) ; +#64527 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310476400, 60.10230989102911500, -28.61774594594330900 ) ) ; +#64528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64529 = ADVANCED_FACE ( 'NONE', ( #71055 ), #48633, .F. ) ; +#64530 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056672700, 24.54999999999998600, -28.70555803802994200 ) ) ; +#64531 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64532 = AXIS2_PLACEMENT_3D ( 'NONE', #7972, #51470, #14258 ) ; +#64533 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#64534 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#64535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41489, #23009, #41744, #4495 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199199400, 0.006247607834321633100 ), + .UNSPECIFIED. ) ; +#64537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64538 = ADVANCED_FACE ( 'NONE', ( #4872 ), #15575, .F. ) ; +#64539 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761900, 81.43945992495534400, -28.34042301926881500 ) ) ; +#64540 = EDGE_LOOP ( 'NONE', ( #35720, #73222, #57276, #38678 ) ) ; +#64541 = EDGE_LOOP ( 'NONE', ( #62935, #64275, #75597 ) ) ; +#64542 = ADVANCED_FACE ( 'NONE', ( #65252 ), #63289, .F. ) ; +#64543 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 20.50000000000000700, 4.650848422521012700 ) ) ; +#64544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64545 = EDGE_LOOP ( 'NONE', ( #27180, #20895, #39884, #57054 ) ) ; +#64546 = ADVANCED_FACE ( 'NONE', ( #32115 ), #21451, .T. ) ; +#64547 = CONICAL_SURFACE ( 'NONE', #23568, 10.50000000000009400, 0.7853981633974500600 ) ; +#64548 = EDGE_LOOP ( 'NONE', ( #45038, #16703, #37915 ) ) ; +#64549 = CIRCLE ( 'NONE', #35751, 10.00000000000009200 ) ; +#64550 = EDGE_LOOP ( 'NONE', ( #5392, #21881, #19964, #32276 ) ) ; +#64551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64552 = CONICAL_SURFACE ( 'NONE', #1675, 10.00000000000009200, 0.7853981633974447300 ) ; +#64553 = EDGE_CURVE ( 'NONE', #12346, #20135, #17539, .T. ) ; +#64554 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19284, #62820, #25564, #69050 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025356000, 0.0006251342085513989800 ), + .UNSPECIFIED. ) ; +#64555 = ORIENTED_EDGE ( 'NONE', *, *, #23281, .T. ) ; +#64556 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64557 = ORIENTED_EDGE ( 'NONE', *, *, #19671, .F. ) ; +#64558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64559 = EDGE_CURVE ( 'NONE', #34852, #69853, #79816, .T. ) ; +#64560 = CONICAL_SURFACE ( 'NONE', #2966, 10.50000000000009600, 0.7853981633974500600 ) ; +#64561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64562 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 64.00000000000000000, -1.205558038030005300 ) ) ; +#64563 = EDGE_CURVE ( 'NONE', #52713, #33247, #67170, .T. ) ; +#64564 = VERTEX_POINT ( 'NONE', #10079 ) ; +#64565 = AXIS2_PLACEMENT_3D ( 'NONE', #38616, #69642, #25892 ) ; +#64566 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427900, 33.17681279774500100, -28.70555803802996700 ) ) ; +#64567 = FACE_OUTER_BOUND ( 'NONE', #19131, .T. ) ; +#64568 = CARTESIAN_POINT ( 'NONE', ( -6.418476861114186200E-014, 22.65857157145693900, -28.20555803802995200 ) ) ; +#64569 = VERTEX_POINT ( 'NONE', #66121 ) ; +#64570 = EDGE_LOOP ( 'NONE', ( #62470, #33937, #71299, #47946 ) ) ; +#64571 = ORIENTED_EDGE ( 'NONE', *, *, #34878, .F. ) ; +#64572 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244500, 40.89456479767167000, -28.70555803802996700 ) ) ; +#64573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64574 = EDGE_LOOP ( 'NONE', ( #66776, #79837, #55278, #58816 ) ) ; +#64575 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 60.69966441803892100, -28.70555803802997700 ) ) ; +#64576 = CIRCLE ( 'NONE', #52281, 10.00000000000009400 ) ; +#64577 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#64578 = AXIS2_PLACEMENT_3D ( 'NONE', #27337, #52020, #70813 ) ; +#64580 = VERTEX_POINT ( 'NONE', #59595 ) ; +#64579 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#64581 = EDGE_CURVE ( 'NONE', #73209, #47046, #41964, .T. ) ; +#64582 = EDGE_CURVE ( 'NONE', #24063, #77007, #30207, .T. ) ; +#64583 = CARTESIAN_POINT ( 'NONE', ( -9.466255859631168300, 91.59999999999999400, -28.70555803802999500 ) ) ; +#64584 = EDGE_LOOP ( 'NONE', ( #70498, #50433, #44905 ) ) ; +#64585 = AXIS2_PLACEMENT_3D ( 'NONE', #50301, #6821, #62870 ) ; +#64586 = ORIENTED_EDGE ( 'NONE', *, *, #55002, .T. ) ; +#64587 = CARTESIAN_POINT ( 'NONE', ( -20.79878767428428400, 4.201212325715476800, -27.03915952075379500 ) ) ; +#64588 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 26.33333333333335300, -3.705558038030004400 ) ) ; +#64589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64590 = CARTESIAN_POINT ( 'NONE', ( 9.254548258614812900, 18.09617684379223200, -28.64146614751507200 ) ) ; +#64591 = ORIENTED_EDGE ( 'NONE', *, *, #44345, .T. ) ; +#64592 = VECTOR ( 'NONE', #78684, 1000.000000000000000 ) ; +#64593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64594 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64595 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#64596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64597 = EDGE_CURVE ( 'NONE', #7944, #54505, #27538, .T. ) ; +#64598 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#64599 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64600 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 18.35339758437810100, -28.20555803802992800 ) ) ; +#64601 = CARTESIAN_POINT ( 'NONE', ( -4.188920016614784600, 28.49322649091141500, -28.30799595738879800 ) ) ; +#64602 = AXIS2_PLACEMENT_3D ( 'NONE', #46541, #52822, #3044 ) ; +#64603 = CARTESIAN_POINT ( 'NONE', ( 3.628494729608143100, 71.43250300240211500, -28.25053119339297700 ) ) ; +#64604 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511817600, 59.60439022488355200, -28.70555803803030800 ) ) ; +#64605 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27433, #33385, #33659, #77173 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286303202100E-007, 0.0007303759720926884800 ), + .UNSPECIFIED. ) ; +#64606 = CARTESIAN_POINT ( 'NONE', ( -10.62849472960806500, 51.43250300240229900, -28.25053119339279900 ) ) ; +#64607 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188000700, 18.53085164125271300, -28.45573375118225800 ) ) ; +#64608 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#64609 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64610 = FACE_OUTER_BOUND ( 'NONE', #20674, .T. ) ; +#64611 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541800, 60.58127875436078100, -28.53757464917570300 ) ) ; +#64612 = AXIS2_PLACEMENT_3D ( 'NONE', #36535, #80071, #42786 ) ; +#64613 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#64614 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390527000, 61.46283204837340000, -28.48697406221666000 ) ) ; +#64615 = ORIENTED_EDGE ( 'NONE', *, *, #7592, .F. ) ; +#64616 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290106400, 10.03732497909451900, -28.41043597897464300 ) ) ; +#64617 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541607400, 50.08874248361072300, -28.53740755999536600 ) ) ; +#64618 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#64619 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 75.79999999999998300, -28.70555803802997700 ) ) ; +#64621 = EDGE_LOOP ( 'NONE', ( #36127, #24952, #12101, #47340 ) ) ; +#64620 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64622 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64623 = FACE_OUTER_BOUND ( 'NONE', #18176, .T. ) ; +#64624 = AXIS2_PLACEMENT_3D ( 'NONE', #71800, #34546, #78048 ) ; +#64625 = ORIENTED_EDGE ( 'NONE', *, *, #64803, .T. ) ; +#64626 = CONICAL_SURFACE ( 'NONE', #75304, 10.00000000000009400, 0.7853981633974447300 ) ; +#64627 = ORIENTED_EDGE ( 'NONE', *, *, #73732, .F. ) ; +#64628 = ORIENTED_EDGE ( 'NONE', *, *, #33016, .F. ) ; +#64629 = FACE_OUTER_BOUND ( 'NONE', #55302, .T. ) ; +#64630 = ORIENTED_EDGE ( 'NONE', *, *, #53802, .T. ) ; +#64631 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 71.65075715145280800, -28.20555803802997700 ) ) ; +#64632 = ORIENTED_EDGE ( 'NONE', *, *, #51237, .T. ) ; +#64633 = ORIENTED_EDGE ( 'NONE', *, *, #50988, .F. ) ; +#64634 = ADVANCED_FACE ( 'NONE', ( #46680 ), #11692, .T. ) ; +#64635 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 70.00000000000000000, -9.205558038030005700 ) ) ; +#64636 = AXIS2_PLACEMENT_3D ( 'NONE', #79245, #73254, #4962 ) ; +#64637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64638 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#64639 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428612000, 39.07141756547895300, -28.70555803802995200 ) ) ; +#64640 = ADVANCED_FACE ( 'NONE', ( #13645 ), #59361, .F. ) ; +#64641 = EDGE_CURVE ( 'NONE', #59476, #51757, #75892, .T. ) ; +#64642 = FACE_OUTER_BOUND ( 'NONE', #48389, .T. ) ; +#64643 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#64644 = ORIENTED_EDGE ( 'NONE', *, *, #69887, .T. ) ; +#64645 = FACE_OUTER_BOUND ( 'NONE', #11424, .T. ) ; +#64646 = AXIS2_PLACEMENT_3D ( 'NONE', #22862, #53865, #29172 ) ; +#64647 = ORIENTED_EDGE ( 'NONE', *, *, #13380, .T. ) ; +#64648 = ORIENTED_EDGE ( 'NONE', *, *, #52696, .T. ) ; +#64649 = EDGE_LOOP ( 'NONE', ( #44312, #19006, #23835, #14356 ) ) ; +#64650 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35559, #10789, #29578, #73082 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169391120986300E-007, 0.0008082646680358131300 ), + .UNSPECIFIED. ) ; +#64651 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64652 = VERTEX_POINT ( 'NONE', #16875 ) ; +#64653 = CIRCLE ( 'NONE', #69472, 10.00000000000009600 ) ; +#64654 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#64656 = ADVANCED_FACE ( 'NONE', ( #77853 ), #9722, .T. ) ; +#64657 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925626800, 27.81967837323414000, -28.55467576046955700 ) ) ; +#64658 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280409600, 26.44142842854297000, -28.37229765499281700 ) ) ; +#64659 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 41.33333333333335000, 8.320721403598817300 ) ) ; +#64660 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#64661 = EDGE_LOOP ( 'NONE', ( #12417, #1034, #62134, #8121, #64070 ) ) ; +#64662 = ORIENTED_EDGE ( 'NONE', *, *, #61086, .F. ) ; +#64663 = EDGE_CURVE ( 'NONE', #70620, #9685, #13074, .T. ) ; +#64664 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000400, 33.15857157145701000, -28.20555803802996700 ) ) ; +#64665 = ORIENTED_EDGE ( 'NONE', *, *, #65623, .F. ) ; +#64666 = LINE ( 'NONE', #41285, #46111 ) ; +#64667 = EDGE_CURVE ( 'NONE', #30761, #51449, #42793, .T. ) ; +#64668 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 24.54999999999997600, -28.20555803802994200 ) ) ; +#64669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64670 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074366100, 21.28032162676581500, -28.55467576046954600 ) ) ; +#64671 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#64672 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576920400, 24.54999999999999700, -28.65220501466659200 ) ) ; +#64673 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#64674 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64675 = EDGE_CURVE ( 'NONE', #41786, #36273, #79386, .T. ) ; +#64676 = CARTESIAN_POINT ( 'NONE', ( 16.22936320877688100, 94.30447372532758300, -28.33536657792572900 ) ) ; +#64677 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64678 = EDGE_CURVE ( 'NONE', #73343, #39312, #961, .T. ) ; +#64679 = AXIS2_PLACEMENT_3D ( 'NONE', #36029, #79550, #42248 ) ; +#64680 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846306100, 70.79999999999998300, -28.55171188418376000 ) ) ; +#64681 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567155400, 49.85339758437810100, -28.20555803802996700 ) ) ; +#64682 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 3.666666666666679400, -5.205558038030003100 ) ) ; +#64683 = CONICAL_SURFACE ( 'NONE', #35681, 10.50000000000009600, 0.7853981633974500600 ) ; +#64684 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.94142842854297000, -28.20555803802995200 ) ) ; +#64685 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807183300, 84.80000000000002600, -28.70555803802997700 ) ) ; +#64686 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280410300, 57.94142842854297700, -28.37229765499284200 ) ) ; +#64687 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282700, 9.746602415621900700, -28.20555803802992800 ) ) ; +#64688 = ORIENTED_EDGE ( 'NONE', *, *, #75592, .T. ) ; +#64689 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806157900, 86.79999999999785100, -28.70555803802997700 ) ) ; +#64690 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534572000, 18.99920551340398600, -28.70555803802992800 ) ) ; +#64691 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#64692 = AXIS2_PLACEMENT_3D ( 'NONE', #56423, #19172, #62704 ) ; +#64693 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050753500, 38.57379779496241000, -28.70555803802995200 ) ) ; +#64695 = ORIENTED_EDGE ( 'NONE', *, *, #60053, .T. ) ; +#64694 = EDGE_CURVE ( 'NONE', #73316, #52911, #64942, .T. ) ; +#64696 = EDGE_CURVE ( 'NONE', #22477, #11270, #50395, .T. ) ; +#64697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64698 = EDGE_CURVE ( 'NONE', #32707, #68343, #36002, .T. ) ; +#64699 = ORIENTED_EDGE ( 'NONE', *, *, #8085, .T. ) ; +#64700 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64397, #45550, #33352, #76866 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143706522400, 0.0006599881756728141000 ), + .UNSPECIFIED. ) ; +#64701 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 89.77559325427189700, -28.45987523529578700 ) ) ; +#64702 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 46.48096581827314100, -28.69431509262337700 ) ) ; +#64703 = EDGE_LOOP ( 'NONE', ( #79282, #19092, #7317 ) ) ; +#64704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64705 = CARTESIAN_POINT ( 'NONE', ( 17.04026895850643800, 20.37561462481247400, -28.30309985153374800 ) ) ; +#64706 = FACE_OUTER_BOUND ( 'NONE', #14058, .T. ) ; +#64707 = ORIENTED_EDGE ( 'NONE', *, *, #45581, .T. ) ; +#64708 = AXIS2_PLACEMENT_3D ( 'NONE', #26534, #76269, #38711 ) ; +#64709 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24128, #61408, #73903, #36607 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572076749100E-007, 0.0007596410370205248000 ), + .UNSPECIFIED. ) ; +#64711 = ORIENTED_EDGE ( 'NONE', *, *, #40223, .T. ) ; +#64712 = FACE_OUTER_BOUND ( 'NONE', #7673, .T. ) ; +#64713 = CIRCLE ( 'NONE', #49151, 10.00000000000009200 ) ; +#64715 = EDGE_LOOP ( 'NONE', ( #32836, #66048, #46865, #18495 ) ) ; +#64714 = CARTESIAN_POINT ( 'NONE', ( -17.03244381443369100, 73.20063685273898100, -28.49841021997938000 ) ) ; +#64716 = ORIENTED_EDGE ( 'NONE', *, *, #63359, .T. ) ; +#64717 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48587, #67388, #5374, #48860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674929972500E-007, 0.0007987728781051773300 ), + .UNSPECIFIED. ) ; +#64718 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280155100, 70.69966441803892100, -28.70555803802997700 ) ) ; +#64719 = EDGE_CURVE ( 'NONE', #73958, #10136, #28265, .T. ) ; +#64720 = ORIENTED_EDGE ( 'NONE', *, *, #47952, .T. ) ; +#64721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64722 = AXIS2_PLACEMENT_3D ( 'NONE', #35076, #78589, #41287 ) ; +#64723 = AXIS2_PLACEMENT_3D ( 'NONE', #49413, #61721, #12206 ) ; +#64724 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136825300, 61.67041185698241200, -28.27321389036146800 ) ) ; +#64725 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999992600, -28.20555803803005900 ) ) ; +#64726 = ADVANCED_FACE ( 'NONE', ( #26298 ), #7742, .T. ) ; +#64727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26888, #52127, #77183, #39917 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925598725800E-007, 0.0004431156063177166300 ), + .UNSPECIFIED. ) ; +#64728 = FACE_OUTER_BOUND ( 'NONE', #77801, .T. ) ; +#64729 = ORIENTED_EDGE ( 'NONE', *, *, #59046, .T. ) ; +#64730 = FACE_OUTER_BOUND ( 'NONE', #4450, .T. ) ; +#64731 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64732 = ORIENTED_EDGE ( 'NONE', *, *, #24904, .F. ) ; +#64733 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671745000, 51.93585231025954100, -28.38420446581290700 ) ) ; +#64734 = ORIENTED_EDGE ( 'NONE', *, *, #38047, .T. ) ; +#64735 = VERTEX_POINT ( 'NONE', #75072 ) ; +#64736 = EDGE_LOOP ( 'NONE', ( #33450, #9626, #61905, #45289 ) ) ; +#64737 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#64738 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64739 = VERTEX_POINT ( 'NONE', #37774 ) ; +#64740 = ADVANCED_FACE ( 'NONE', ( #44705 ), #55440, .F. ) ; +#64741 = CIRCLE ( 'NONE', #65811, 10.50000000000009600 ) ; +#64742 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 47.33333333333334300, 1.294441961969997200 ) ) ; +#64743 = AXIS2_PLACEMENT_3D ( 'NONE', #70375, #33129, #76628 ) ; +#64744 = ORIENTED_EDGE ( 'NONE', *, *, #60027, .T. ) ; +#64745 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 70.58127875436079500, -28.53757464917570600 ) ) ; +#64746 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 70.13716795162659400, -28.48697406221667400 ) ) ; +#64747 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 12.33333333333334800, 2.794441961969998300 ) ) ; +#64748 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ; +#64749 = AXIS2_PLACEMENT_3D ( 'NONE', #69924, #75915, #63437 ) ; +#64750 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.30277574221145900, -28.32715733700507200 ) ) ; +#64751 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#64752 = ORIENTED_EDGE ( 'NONE', *, *, #15936, .T. ) ; +#64753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64754 = CIRCLE ( 'NONE', #4864, 10.50000000000009900 ) ; +#64755 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 49.66666666666668600, -10.73183747965883100 ) ) ; +#64756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64757 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192848700, 66.79999999999998300, -28.70555803802997700 ) ) ; +#64758 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64759 = AXIS2_PLACEMENT_3D ( 'NONE', #12126, #18373, #49336 ) ; +#64760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48798, #73592, #36319, #11588 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.708504484033303300E-017, 0.001492013864175115100 ), + .UNSPECIFIED. ) ; +#64761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64762 = ADVANCED_FACE ( 'NONE', ( #24324 ), #22364, .F. ) ; +#64763 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 78.62623792124938400, -28.70555803802997700 ) ) ; +#64764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64765 = AXIS2_PLACEMENT_3D ( 'NONE', #67261, #79779, #54735 ) ; +#64766 = CIRCLE ( 'NONE', #26730, 10.50000000000009600 ) ; +#64767 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995701300, 34.11903418172681800, -28.69431509262337700 ) ) ; +#64768 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310682100, 18.10230989102885200, -28.61774594594303500 ) ) ; +#64769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64770 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64771 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223644200, 71.76592160028475600, -28.37510699173786900 ) ) ; +#64772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64773 = CARTESIAN_POINT ( 'NONE', ( -5.100117264795677800, 14.05000000000000600, -28.53808257741930300 ) ) ; +#64775 = VERTEX_POINT ( 'NONE', #56553 ) ; +#64774 = CARTESIAN_POINT ( 'NONE', ( 8.901631271234702300, 50.54999999999999000, -28.62400292823477700 ) ) ; +#64776 = CONICAL_SURFACE ( 'NONE', #58288, 10.50000000000009200, 0.7853981633974482800 ) ; +#64777 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690293800, 75.79999999999950000, -28.70555803803030800 ) ) ; +#64778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64779 = ORIENTED_EDGE ( 'NONE', *, *, #55828, .F. ) ; +#64780 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146249800, 51.25732391202375700, -28.20555803803030800 ) ) ; +#64781 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64782 = CIRCLE ( 'NONE', #45802, 10.00000000000009400 ) ; +#64783 = CONICAL_SURFACE ( 'NONE', #76248, 10.50000000000009600, 0.7853981633974482800 ) ; +#64785 = EDGE_CURVE ( 'NONE', #7085, #18214, #21545, .T. ) ; +#64784 = ORIENTED_EDGE ( 'NONE', *, *, #68698, .T. ) ; +#64786 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 53.16666666666667900, 6.794441961969992500 ) ) ; +#64787 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64788 = PLANE ( 'NONE', #9109 ) ; +#64789 = EDGE_CURVE ( 'NONE', #26321, #35911, #38868, .T. ) ; +#64790 = FACE_OUTER_BOUND ( 'NONE', #1720, .T. ) ; +#64791 = VERTEX_POINT ( 'NONE', #782 ) ; +#64792 = EDGE_LOOP ( 'NONE', ( #73016, #53044, #41450, #71669 ) ) ; +#64793 = CARTESIAN_POINT ( 'NONE', ( 6.146130951488689000, 8.865230368351737100, -28.64096433122108500 ) ) ; +#64794 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344057800, 17.92298334620733500, -28.20555803802993500 ) ) ; +#64795 = CARTESIAN_POINT ( 'NONE', ( -1.951092329650154100E-013, 83.89610994602595900, -28.37519436813192500 ) ) ; +#64796 = CARTESIAN_POINT ( 'NONE', ( 3.839550451718966300, 80.46231468379672000, -28.37082013777849100 ) ) ; +#64797 = EDGE_CURVE ( 'NONE', #52291, #73931, #40855, .T. ) ; +#64798 = CYLINDRICAL_SURFACE ( 'NONE', #13933, 10.00000000000000200 ) ; +#64799 = EDGE_CURVE ( 'NONE', #35860, #60180, #7043, .T. ) ; +#64800 = CIRCLE ( 'NONE', #35171, 9.500000000000099500 ) ; +#64801 = ORIENTED_EDGE ( 'NONE', *, *, #68213, .F. ) ; +#64802 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 71.52858243452104100, -28.70555803802997700 ) ) ; +#64803 = EDGE_CURVE ( 'NONE', #80789, #53826, #73400, .T. ) ; +#64804 = EDGE_CURVE ( 'NONE', #66932, #36158, #58910, .T. ) ; +#64805 = ORIENTED_EDGE ( 'NONE', *, *, #54148, .T. ) ; +#64806 = ORIENTED_EDGE ( 'NONE', *, *, #31991, .F. ) ; +#64807 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466620100, 18.83106028708544600, -28.57333386111662700 ) ) ; +#64808 = VERTEX_POINT ( 'NONE', #1323 ) ; +#64809 = ORIENTED_EDGE ( 'NONE', *, *, #63154, .T. ) ; +#64810 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.94142842854297000, -28.20555803802997700 ) ) ; +#64811 = ORIENTED_EDGE ( 'NONE', *, *, #4845, .T. ) ; +#64812 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 18.33333333333333900, -8.133761268305512700 ) ) ; +#64813 = CARTESIAN_POINT ( 'NONE', ( 17.10696782501636200, 92.65348391250817900, -28.48107268352801200 ) ) ; +#64814 = CIRCLE ( 'NONE', #28173, 10.00000000000009400 ) ; +#64815 = EDGE_LOOP ( 'NONE', ( #70133, #28309, #63080, #53257 ) ) ; +#64816 = AXIS2_PLACEMENT_3D ( 'NONE', #30382, #73892, #36593 ) ; +#64817 = EDGE_CURVE ( 'NONE', #40804, #51984, #44403, .T. ) ; +#64818 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#64819 = EDGE_CURVE ( 'NONE', #9591, #39898, #30047, .T. ) ; +#64820 = EDGE_CURVE ( 'NONE', #5279, #21820, #15550, .T. ) ; +#64821 = CARTESIAN_POINT ( 'NONE', ( -16.62514415533942400, 9.187427922330284600, -28.57261973208899500 ) ) ; +#64822 = ADVANCED_FACE ( 'NONE', ( #72029 ), #36942, .F. ) ; +#64823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9496, #15773, #71809, #34551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278941329000, 0.001517194977238257300 ), + .UNSPECIFIED. ) ; +#64824 = FACE_OUTER_BOUND ( 'NONE', #32988, .T. ) ; +#64825 = AXIS2_PLACEMENT_3D ( 'NONE', #58115, #20871, #64408 ) ; +#64826 = ORIENTED_EDGE ( 'NONE', *, *, #22594, .T. ) ; +#64827 = FACE_OUTER_BOUND ( 'NONE', #72997, .T. ) ; +#64828 = ADVANCED_FACE ( 'NONE', ( #61341 ), #63914, .T. ) ; +#64829 = AXIS2_PLACEMENT_3D ( 'NONE', #80618, #37076, #30602 ) ; +#64830 = AXIS2_PLACEMENT_3D ( 'NONE', #39093, #1825, #45327 ) ; +#64831 = CARTESIAN_POINT ( 'NONE', ( -10.63940720644214200, 18.16749699759768800, -28.25435056028468100 ) ) ; +#64832 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58637, #15123, #71146, #33889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207974165800E-007, 0.0008724366121409701600 ), + .UNSPECIFIED. ) ; +#64833 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64835 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 61.83333333333331400, 0.9380355014189731800 ) ) ; +#64836 = CARTESIAN_POINT ( 'NONE', ( -17.24454976001813800, 8.877725119990932600, -28.45040264298921800 ) ) ; +#64837 = CIRCLE ( 'NONE', #23019, 10.00000000000009200 ) ; +#64838 = ADVANCED_FACE ( 'NONE', ( #73970 ), #68096, .F. ) ; +#64839 = CARTESIAN_POINT ( 'NONE', ( -3.171414825659359900, 93.00673221364435500, -28.60974763495493900 ) ) ; +#64840 = CONICAL_SURFACE ( 'NONE', #29109, 10.50000000000009800, 0.7853981633974500600 ) ; +#64841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64843 = ORIENTED_EDGE ( 'NONE', *, *, #69536, .F. ) ; +#64844 = FACE_OUTER_BOUND ( 'NONE', #71328, .T. ) ; +#64845 = AXIS2_PLACEMENT_3D ( 'NONE', #56720, #19470, #62996 ) ; +#64846 = ORIENTED_EDGE ( 'NONE', *, *, #47576, .T. ) ; +#64847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15134, #33633, #77144, #58644 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656169426100, 0.001370301364302475100 ), + .UNSPECIFIED. ) ; +#64848 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344310900, 38.92298334620755900, -28.20555803802996000 ) ) ; +#64849 = ADVANCED_FACE ( 'NONE', ( #20419 ), #14386, .T. ) ; +#64850 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#64851 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64852 = CARTESIAN_POINT ( 'NONE', ( -16.68720606475018500, 6.625587870502487300, -28.19902840602414400 ) ) ; +#64853 = CIRCLE ( 'NONE', #3048, 10.00000000000009200 ) ; +#64854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64855 = CIRCLE ( 'NONE', #51672, 10.00000000000009200 ) ; +#64856 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 24.16666666666667100, 0.1341879241256129200 ) ) ; +#64857 = VERTEX_POINT ( 'NONE', #64191 ) ; +#64858 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#64859 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#64860 = EDGE_CURVE ( 'NONE', #63837, #13063, #57403, .T. ) ; +#64861 = CONICAL_SURFACE ( 'NONE', #30217, 10.00000000000009200, 0.7853981633974447300 ) ; +#64862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64863 = AXIS2_PLACEMENT_3D ( 'NONE', #16972, #29782, #73271 ) ; +#64864 = ORIENTED_EDGE ( 'NONE', *, *, #72764, .T. ) ; +#64865 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 79.94924284854670300, -28.20555803803047800 ) ) ; +#64866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64867 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#64869 = ORIENTED_EDGE ( 'NONE', *, *, #8041, .F. ) ; +#64868 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#64870 = ADVANCED_FACE ( 'NONE', ( #53506 ), #1886, .F. ) ; +#64871 = CARTESIAN_POINT ( 'NONE', ( 15.27292969368722600, 55.79999999999976300, -28.53959444491225000 ) ) ; +#64872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64873 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274351100, 15.93535825203924400, -28.53896444442197800 ) ) ; +#64874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64875 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 31.17701665379186000, -28.20555803802995200 ) ) ; +#64876 = CIRCLE ( 'NONE', #22744, 10.50000000000009200 ) ; +#64877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64879 = CONICAL_SURFACE ( 'NONE', #66372, 10.50000000000009600, 0.7853981633974500600 ) ; +#64880 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#64881 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64882 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#64883 = ORIENTED_EDGE ( 'NONE', *, *, #29583, .T. ) ; +#64884 = AXIS2_PLACEMENT_3D ( 'NONE', #30709, #80474, #67955 ) ; +#64885 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 85.92347538297963200, -28.70555803803014400 ) ) ; +#64886 = ORIENTED_EDGE ( 'NONE', *, *, #25707, .T. ) ; +#64887 = ORIENTED_EDGE ( 'NONE', *, *, #77272, .T. ) ; +#64888 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#64889 = ORIENTED_EDGE ( 'NONE', *, *, #49125, .F. ) ; +#64890 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64892 = CARTESIAN_POINT ( 'NONE', ( 16.24682844054300900, 94.09365688108601900, -28.38965197393400100 ) ) ; +#64893 = CONICAL_SURFACE ( 'NONE', #26111, 10.50000000000009400, 0.7853981633974500600 ) ; +#64894 = FACE_OUTER_BOUND ( 'NONE', #65874, .T. ) ; +#64895 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64896 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507453100, 21.02620220503759200, -28.70555803802998100 ) ) ; +#64897 = ORIENTED_EDGE ( 'NONE', *, *, #50697, .F. ) ; +#64898 = AXIS2_PLACEMENT_3D ( 'NONE', #49848, #98, #6362 ) ; +#64899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64901 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78957, #10670, #29476, #72956 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446015622400E-007, 0.0002745498510224212200 ), + .UNSPECIFIED. ) ; +#64902 = CIRCLE ( 'NONE', #13825, 9.500000000000097700 ) ; +#64903 = ORIENTED_EDGE ( 'NONE', *, *, #10914, .T. ) ; +#64904 = EDGE_CURVE ( 'NONE', #25682, #13603, #1056, .T. ) ; +#64905 = VERTEX_POINT ( 'NONE', #20923 ) ; +#64906 = FACE_OUTER_BOUND ( 'NONE', #67741, .T. ) ; +#64907 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64908 = CIRCLE ( 'NONE', #78330, 10.00000000000009400 ) ; +#64909 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 67.83333333333337100, 6.794441961969992500 ) ) ; +#64910 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543029200, 80.23522516708058600, -28.27573853395030300 ) ) ; +#64911 = ORIENTED_EDGE ( 'NONE', *, *, #20005, .F. ) ; +#64912 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.62753447840929500, -28.38801640354893500 ) ) ; +#64913 = CARTESIAN_POINT ( 'NONE', ( 8.317242019631025200E-015, 26.89962244433173700, -28.53664883431606500 ) ) ; +#64914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64915 = EDGE_CURVE ( 'NONE', #49628, #30212, #3846, .T. ) ; +#64916 = EDGE_CURVE ( 'NONE', #37884, #13816, #67394, .T. ) ; +#64917 = FACE_OUTER_BOUND ( 'NONE', #51552, .T. ) ; +#64918 = EDGE_LOOP ( 'NONE', ( #76874, #24629, #68826, #56514 ) ) ; +#64919 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949248600, 17.57379779496225000, -28.70555803803009500 ) ) ; +#64920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64921 = VECTOR ( 'NONE', #408, 1000.000000000000000 ) ; +#64922 = EDGE_LOOP ( 'NONE', ( #57755, #35752, #47085, #37633 ) ) ; +#64923 = VECTOR ( 'NONE', #37165, 1000.000000000000000 ) ; +#64924 = ADVANCED_FACE ( 'NONE', ( #35041 ), #33050, .F. ) ; +#64925 = AXIS2_PLACEMENT_3D ( 'NONE', #65471, #28213, #71702 ) ; +#64926 = EDGE_CURVE ( 'NONE', #13975, #57435, #49550, .T. ) ; +#64927 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40175, #27441, #15439, #58945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.498374721940738900E-018, 0.001246264537621169800 ), + .UNSPECIFIED. ) ; +#64928 = EDGE_CURVE ( 'NONE', #32213, #46777, #70037, .T. ) ; +#64929 = ORIENTED_EDGE ( 'NONE', *, *, #19987, .T. ) ; +#64930 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64931 = EDGE_CURVE ( 'NONE', #10564, #35281, #18465, .T. ) ; +#64932 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472979800, 49.63131911501867000, -28.51286550264550400 ) ) ; +#64933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64934 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 39.16666666666669300, -12.20555803803000000 ) ) ; +#64935 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580928100, 42.73263087059571300, -28.67620115463453300 ) ) ; +#64936 = CONICAL_SURFACE ( 'NONE', #21798, 10.00000000000009200, 0.7853981633974447300 ) ; +#64937 = AXIS2_PLACEMENT_3D ( 'NONE', #33209, #76719, #39454 ) ; +#64938 = CIRCLE ( 'NONE', #29842, 9.500000000000099500 ) ; +#64939 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64940 = ORIENTED_EDGE ( 'NONE', *, *, #39493, .F. ) ; +#64941 = ADVANCED_FACE ( 'NONE', ( #66166 ), #31125, .F. ) ; +#64942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23136, #18504, #43494, #6253 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190604993400E-007, 0.0006649560044141189900 ), + .UNSPECIFIED. ) ; +#64943 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000001800, 19.90050506338822300, -28.70555803802995200 ) ) ; +#64944 = PLANE ( 'NONE', #23503 ) ; +#64945 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#64946 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64947 = CARTESIAN_POINT ( 'NONE', ( 10.12141251450031400, 81.76337688193780200, -28.37223523914940100 ) ) ; +#64948 = ADVANCED_FACE ( 'NONE', ( #5822 ), #78820, .F. ) ; +#64949 = ORIENTED_EDGE ( 'NONE', *, *, #43421, .T. ) ; +#64950 = AXIS2_PLACEMENT_3D ( 'NONE', #21221, #64756, #27477 ) ; +#64951 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 31.17701665379185600, -28.20555803802995200 ) ) ; +#64952 = AXIS2_PLACEMENT_3D ( 'NONE', #31798, #49702, #8103 ) ; +#64953 = ADVANCED_FACE ( 'NONE', ( #64230 ), #45646, .T. ) ; +#64954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#64956 = FACE_OUTER_BOUND ( 'NONE', #276, .T. ) ; +#64957 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878100, 80.16749699759769500, -28.23966044827355000 ) ) ; +#64958 = ORIENTED_EDGE ( 'NONE', *, *, #60052, .T. ) ; +#64959 = CARTESIAN_POINT ( 'NONE', ( 3.057126731466696800, 41.79130857014966700, -28.37223374938523400 ) ) ; +#64960 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 1.500000000000004900, 4.650848422521012700 ) ) ; +#64961 = ORIENTED_EDGE ( 'NONE', *, *, #29340, .F. ) ; +#64962 = CARTESIAN_POINT ( 'NONE', ( 9.343046065459464700, 52.51973550835653300, -28.70555803803014100 ) ) ; +#64963 = CARTESIAN_POINT ( 'NONE', ( 2.832817182603705400, 51.03343807497617500, -28.37235298663058800 ) ) ; +#64964 = VERTEX_POINT ( 'NONE', #3199 ) ; +#64965 = ORIENTED_EDGE ( 'NONE', *, *, #25363, .T. ) ; +#64966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#64967 = CONICAL_SURFACE ( 'NONE', #65672, 10.50000000000009600, 0.7853981633974500600 ) ; +#64968 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000162500, 78.62623792124919900, -28.70555803803030800 ) ) ; +#64969 = AXIS2_PLACEMENT_3D ( 'NONE', #30298, #73794, #36496 ) ; +#64971 = ORIENTED_EDGE ( 'NONE', *, *, #73143, .F. ) ; +#64970 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782523800, 51.43945992495533700, -28.34042301926881500 ) ) ; +#64972 = EDGE_CURVE ( 'NONE', #68193, #63160, #52913, .T. ) ; +#64973 = ORIENTED_EDGE ( 'NONE', *, *, #33545, .F. ) ; +#64974 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#64975 = CARTESIAN_POINT ( 'NONE', ( -15.64690244143967700, 56.44146991525349900, -28.52629299565672800 ) ) ; +#64976 = LINE ( 'NONE', #78832, #4611 ) ; +#64977 = CARTESIAN_POINT ( 'NONE', ( 15.31403449022169700, 35.04999999999997600, -28.37321477197629300 ) ) ; +#64978 = VERTEX_POINT ( 'NONE', #46700 ) ; +#64979 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760500, 42.02620220503713700, -28.70555803802996700 ) ) ; +#64980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64981 = PLANE ( 'NONE', #25747 ) ; +#64982 = ORIENTED_EDGE ( 'NONE', *, *, #60129, .F. ) ; +#64983 = EDGE_CURVE ( 'NONE', #38410, #78383, #51509, .T. ) ; +#64984 = EDGE_LOOP ( 'NONE', ( #63919, #45683, #21695, #44170, #3835 ) ) ; +#64985 = CONICAL_SURFACE ( 'NONE', #74591, 10.00000000000009200, 0.7853981633974447300 ) ; +#64986 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#64987 = AXIS2_PLACEMENT_3D ( 'NONE', #32499, #20264, #7728 ) ; +#64988 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040400, 61.43250300240213600, -28.20555803803014400 ) ) ; +#64989 = CIRCLE ( 'NONE', #70436, 9.500000000000097700 ) ; +#64990 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729965800, 51.58737389638834300, -28.29936525552484400 ) ) ; +#64991 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571427900, 18.07141756547892100, -28.70555803802992800 ) ) ; +#64992 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#64993 = ORIENTED_EDGE ( 'NONE', *, *, #30387, .T. ) ; +#64994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14636, #58143, #33389, #76909 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565737000491700E-007, 0.0002592140922085934800 ), + .UNSPECIFIED. ) ; +#64995 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#64996 = CONICAL_SURFACE ( 'NONE', #15641, 10.00000000000009200, 0.7853981633974447300 ) ; +#64998 = ORIENTED_EDGE ( 'NONE', *, *, #78371, .T. ) ; +#64997 = CARTESIAN_POINT ( 'NONE', ( -11.56194429656799400, 39.11613305479827600, -28.57723854182875200 ) ) ; +#64999 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 75.79999999999999700, -28.70525300642875200 ) ) ; +#65000 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 10.83333333333335000, -4.152999154772353500 ) ) ; +#65001 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049509800, 20.90771342879318000, -28.53891855579981000 ) ) ; +#65002 = FACE_OUTER_BOUND ( 'NONE', #78889, .T. ) ; +#65003 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 45.16666666666667100, -2.545304000185620600 ) ) ; +#65004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65005 = ORIENTED_EDGE ( 'NONE', *, *, #39267, .F. ) ; +#65006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65007 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 10.16666666666667300, -3.349151577478988200 ) ) ; +#65008 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534568500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#65009 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180789400, 69.94924284854687400, -28.20555803802997700 ) ) ; +#65010 = EDGE_CURVE ( 'NONE', #34888, #16470, #47614, .T. ) ; +#65011 = CIRCLE ( 'NONE', #34906, 9.500000000000097700 ) ; +#65012 = ORIENTED_EDGE ( 'NONE', *, *, #35497, .T. ) ; +#65013 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#65014 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 47.50000000000000700, 6.847000845227646500 ) ) ; +#65015 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715600, 70.34267608797551900, -28.20555803803014400 ) ) ; +#65016 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65017 = ORIENTED_EDGE ( 'NONE', *, *, #9433, .F. ) ; +#65018 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17888, #36629, #55396, #18149 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866668103500E-007, 0.001076778502991247600 ), + .UNSPECIFIED. ) ; +#65019 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040930200, 43.65857157145702400, -28.37229765499284500 ) ) ; +#65020 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489072700, 49.97143078992715500, -28.37063977681168200 ) ) ; +#65021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65023 = CIRCLE ( 'NONE', #63483, 10.50000000000009600 ) ; +#65024 = CIRCLE ( 'NONE', #13124, 9.500000000000099500 ) ; +#65025 = ORIENTED_EDGE ( 'NONE', *, *, #76362, .T. ) ; +#65027 = EDGE_CURVE ( 'NONE', #2326, #27460, #38434, .T. ) ; +#65026 = VERTEX_POINT ( 'NONE', #65535 ) ; +#65028 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65029 = CARTESIAN_POINT ( 'NONE', ( 9.042760264135456100, 65.79999999999999700, -28.53819074160683700 ) ) ; +#65030 = VERTEX_POINT ( 'NONE', #28280 ) ; +#65031 = ORIENTED_EDGE ( 'NONE', *, *, #3051, .T. ) ; +#65032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65034 = EDGE_CURVE ( 'NONE', #76259, #38688, #24029, .T. ) ; +#65033 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51563, #57854, #69892, #32642 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904268226900E-007, 0.0005865296644889271200 ), + .UNSPECIFIED. ) ; +#65035 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 60.37705528805136600, -28.20555803802997700 ) ) ; +#65036 = ORIENTED_EDGE ( 'NONE', *, *, #9960, .T. ) ; +#65037 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65039 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999940500, 28.13176086632792000, -28.70555803802994200 ) ) ; +#65040 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65041 = ADVANCED_FACE ( 'NONE', ( #80741 ), #60323, .F. ) ; +#65042 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#65043 = AXIS2_PLACEMENT_3D ( 'NONE', #22077, #65605, #28374 ) ; +#65044 = EDGE_LOOP ( 'NONE', ( #48254, #77805, #22619, #76287 ) ) ; +#65045 = EDGE_CURVE ( 'NONE', #66662, #65026, #9542, .T. ) ; +#65046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65047 = ADVANCED_FACE ( 'NONE', ( #12619 ), #27224, .T. ) ; +#65048 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 11.92856308690589500, -28.36981695106777200 ) ) ; +#65049 = EDGE_CURVE ( 'NONE', #66318, #32707, #43711, .T. ) ; +#65050 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001200, 61.07757630314174000, -28.53861367218623700 ) ) ; +#65051 = CIRCLE ( 'NONE', #61097, 10.50000000000009600 ) ; +#65052 = AXIS2_PLACEMENT_3D ( 'NONE', #42301, #73340, #11057 ) ; +#65053 = ORIENTED_EDGE ( 'NONE', *, *, #40172, .F. ) ; +#65054 = ORIENTED_EDGE ( 'NONE', *, *, #71176, .F. ) ; +#65055 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 51.00000000000000700, -9.205558038030005700 ) ) ; +#65056 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#65057 = EDGE_LOOP ( 'NONE', ( #55489, #17241, #38952, #28445 ) ) ; +#65058 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65059 = CONICAL_SURFACE ( 'NONE', #64172, 10.50000000000009600, 0.7853981633974500600 ) ; +#65060 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474175900, 10.36172549728292400, -28.47230003642280100 ) ) ; +#65061 = AXIS2_PLACEMENT_3D ( 'NONE', #59461, #22195, #65722 ) ; +#65062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65063 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#65064 = AXIS2_PLACEMENT_3D ( 'NONE', #11964, #67977, #55448 ) ; +#65065 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007600, 72.97376207875005600, -28.70555803803047500 ) ) ; +#65066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65068 = VERTEX_POINT ( 'NONE', #72582 ) ; +#65067 = EDGE_CURVE ( 'NONE', #58834, #7944, #16523, .T. ) ; +#65070 = ADVANCED_FACE ( 'NONE', ( #62257 ), #41782, .F. ) ; +#65069 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23099, #60373, #35611, #79128 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572412355700E-007, 0.0004669842289003374200 ), + .UNSPECIFIED. ) ; +#65071 = EDGE_CURVE ( 'NONE', #29509, #72943, #58343, .T. ) ; +#65072 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265444900, 61.32559822014140800, -28.29986836858048000 ) ) ; +#65073 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 48.00000000000000700, -1.205558038030005300 ) ) ; +#65074 = FACE_OUTER_BOUND ( 'NONE', #22310, .T. ) ; +#65075 = ORIENTED_EDGE ( 'NONE', *, *, #75950, .F. ) ; +#65076 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999991600, 50.02242369685793500, -28.53861367218592100 ) ) ; +#65077 = ORIENTED_EDGE ( 'NONE', *, *, #50197, .F. ) ; +#65078 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 41.24660241562182300, -28.20555803802996700 ) ) ; +#65079 = VERTEX_POINT ( 'NONE', #23066 ) ; +#65080 = EDGE_CURVE ( 'NONE', #26957, #49007, #76834, .T. ) ; +#65081 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 16.16666666666668200, 6.794441961969992500 ) ) ; +#65082 = AXIS2_PLACEMENT_3D ( 'NONE', #34938, #78454, #41164 ) ; +#65083 = AXIS2_PLACEMENT_3D ( 'NONE', #1006, #7254, #38248 ) ; +#65084 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300883400, 88.40378923507003600, -28.61864990621752700 ) ) ; +#65085 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035082700, 70.23507838941435500, -28.27580420063968000 ) ) ; +#65086 = FACE_OUTER_BOUND ( 'NONE', #49442, .T. ) ; +#65087 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001100, 73.99926474563209000, -28.70555803802999500 ) ) ; +#65088 = ORIENTED_EDGE ( 'NONE', *, *, #15460, .F. ) ; +#65089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65090 = ORIENTED_EDGE ( 'NONE', *, *, #513, .T. ) ; +#65091 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 19.49999999999999300, -4.865812075874393000 ) ) ; +#65092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65093 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171143700, 19.29999999999999000, -28.57107744631859300 ) ) ; +#65094 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 59.66666666666667100, -5.205558038030003100 ) ) ; +#65095 = FACE_OUTER_BOUND ( 'NONE', #59380, .T. ) ; +#65096 = CIRCLE ( 'NONE', #17766, 10.50000000000009600 ) ; +#65097 = AXIS2_PLACEMENT_3D ( 'NONE', #643, #44130, #6908 ) ; +#65098 = ORIENTED_EDGE ( 'NONE', *, *, #20446, .F. ) ; +#65099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65100 = ORIENTED_EDGE ( 'NONE', *, *, #3036, .F. ) ; +#65101 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 60.16749699759768800, -28.20555803802997700 ) ) ; +#65102 = ORIENTED_EDGE ( 'NONE', *, *, #47077, .F. ) ; +#65103 = CIRCLE ( 'NONE', #73150, 10.50000000000009600 ) ; +#65104 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 70.34267608797600200, -28.20555803802997700 ) ) ; +#65105 = ORIENTED_EDGE ( 'NONE', *, *, #9618, .F. ) ; +#65106 = ORIENTED_EDGE ( 'NONE', *, *, #37788, .F. ) ; +#65107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40554, #3285, #46792, #9551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002504092785988685800, 0.001246815221881859100 ), + .UNSPECIFIED. ) ; +#65108 = ORIENTED_EDGE ( 'NONE', *, *, #47357, .F. ) ; +#65109 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999600, 60.90050506338821600, -28.70555803802997700 ) ) ; +#65110 = ORIENTED_EDGE ( 'NONE', *, *, #59724, .F. ) ; +#65111 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280165000, 60.90033558196072500, -28.70555803803030800 ) ) ; +#65112 = CARTESIAN_POINT ( 'NONE', ( 9.553492182969083800, 79.37488905615674600, -28.55192314908695300 ) ) ; +#65113 = AXIS2_PLACEMENT_3D ( 'NONE', #76877, #39611, #2325 ) ; +#65114 = EDGE_LOOP ( 'NONE', ( #49130, #68455, #68388, #67633 ) ) ; +#65115 = CARTESIAN_POINT ( 'NONE', ( 10.49999999998612300, 80.90050506339281400, -28.70555803803030800 ) ) ; +#65116 = ADVANCED_FACE ( 'NONE', ( #14562 ), #39842, .F. ) ; +#65117 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998200, 59.41684396980715400, -28.70555803802999500 ) ) ; +#65118 = EDGE_CURVE ( 'NONE', #26420, #73466, #56373, .T. ) ; +#65119 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#65120 = ORIENTED_EDGE ( 'NONE', *, *, #62759, .F. ) ; +#65121 = CONICAL_SURFACE ( 'NONE', #32358, 10.00000000000009200, 0.7853981633974447300 ) ; +#65122 = ORIENTED_EDGE ( 'NONE', *, *, #33419, .F. ) ; +#65123 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 22.00000000000001400, -1.205558038030002800 ) ) ; +#65124 = ORIENTED_EDGE ( 'NONE', *, *, #44341, .F. ) ; +#65125 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 62.97376207875058900, -28.70555803802997700 ) ) ; +#65126 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65127 = VERTEX_POINT ( 'NONE', #66849 ) ; +#65128 = VERTEX_POINT ( 'NONE', #11094 ) ; +#65129 = VERTEX_POINT ( 'NONE', #54594 ) ; +#65130 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873285300, 69.89196326503807200, -28.29033182162403300 ) ) ; +#65131 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349247300, 39.70543520232828200, -28.70555803802995200 ) ) ; +#65132 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528388900, 41.46868088498140300, -28.51286550264485000 ) ) ; +#65133 = CARTESIAN_POINT ( 'NONE', ( 4.118917725798852700, 51.10238820582969100, -28.32098513914472800 ) ) ; +#65134 = FACE_OUTER_BOUND ( 'NONE', #5742, .T. ) ; +#65135 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305487700, 41.89604671418359800, -28.70555803803001600 ) ) ; +#65136 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 9.746602415621900700, -28.20555803802992800 ) ) ; +#65137 = ADVANCED_FACE ( 'NONE', ( #72952 ), #70982, .T. ) ; +#65138 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65139 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65140 = CARTESIAN_POINT ( 'NONE', ( 4.512728101709655900, 81.47860083896975400, -28.56001287362850900 ) ) ; +#65141 = ORIENTED_EDGE ( 'NONE', *, *, #55719, .F. ) ; +#65142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65143 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155508800, 76.13383585008129700, -28.37247596307111800 ) ) ; +#65144 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 65.79999999999999700, -28.63843632546336000 ) ) ; +#65145 = CARTESIAN_POINT ( 'NONE', ( 10.36059854261447200, 39.16749699759768800, -28.25434854811489100 ) ) ; +#65146 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 80.34267608797603100, -28.20555803802997700 ) ) ; +#65147 = EDGE_CURVE ( 'NONE', #50347, #47514, #6745, .T. ) ; +#65148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65149 = LINE ( 'NONE', #65228, #54416 ) ; +#65150 = ORIENTED_EDGE ( 'NONE', *, *, #52852, .F. ) ; +#65151 = EDGE_CURVE ( 'NONE', #77643, #2143, #23302, .T. ) ; +#65152 = ORIENTED_EDGE ( 'NONE', *, *, #69797, .T. ) ; +#65153 = VERTEX_POINT ( 'NONE', #73105 ) ; +#65154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65156 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999998900, 69.81066373133481300, -28.53923937255195800 ) ) ; +#65157 = EDGE_CURVE ( 'NONE', #49013, #15972, #74893, .T. ) ; +#65158 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358240100E-015, 29.80000000000008600, -28.70555803802994200 ) ) ; +#65160 = ADVANCED_FACE ( 'NONE', ( #8675 ), #69035, .T. ) ; +#65159 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34303, #15268, #46769, #9530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.105975019248254100E-016, 0.001179148174662773300 ), + .UNSPECIFIED. ) ; +#65161 = EDGE_CURVE ( 'NONE', #75483, #55596, #75864, .T. ) ; +#65162 = AXIS2_PLACEMENT_3D ( 'NONE', #43815, #19090, #322 ) ; +#65163 = FACE_OUTER_BOUND ( 'NONE', #47329, .T. ) ; +#65164 = CIRCLE ( 'NONE', #9269, 9.500000000000095900 ) ; +#65165 = VERTEX_POINT ( 'NONE', #6187 ) ; +#65166 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548987100, 18.15930907398587700, -28.35186440610879900 ) ) ; +#65167 = VERTEX_POINT ( 'NONE', #18695 ) ; +#65168 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 65.66666666666668600, -8.133761268305512700 ) ) ; +#65169 = VERTEX_POINT ( 'NONE', #62225 ) ; +#65170 = AXIS2_PLACEMENT_3D ( 'NONE', #59558, #22284, #65819 ) ; +#65171 = EDGE_CURVE ( 'NONE', #55877, #42509, #61439, .T. ) ; +#65172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65173 = EDGE_CURVE ( 'NONE', #28936, #58503, #54428, .T. ) ; +#65174 = EDGE_CURVE ( 'NONE', #57143, #4660, #46909, .T. ) ; +#65175 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#65176 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52855, #9329, #60245, #22973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962720217700, 0.0008252574424208157300 ), + .UNSPECIFIED. ) ; +#65177 = AXIS2_PLACEMENT_3D ( 'NONE', #5434, #48917, #11704 ) ; +#65178 = FACE_OUTER_BOUND ( 'NONE', #47418, .T. ) ; +#65179 = VERTEX_POINT ( 'NONE', #55936 ) ; +#65180 = CONICAL_SURFACE ( 'NONE', #65674, 10.00000000000009200, 0.7853981633974447300 ) ; +#65181 = VERTEX_POINT ( 'NONE', #74991 ) ; +#65182 = ORIENTED_EDGE ( 'NONE', *, *, #36544, .F. ) ; +#65183 = AXIS2_PLACEMENT_3D ( 'NONE', #42486, #5249, #48726 ) ; +#65184 = ORIENTED_EDGE ( 'NONE', *, *, #2100, .T. ) ; +#65185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65186 = CONICAL_SURFACE ( 'NONE', #27764, 10.50000000000009600, 0.7853981633974482800 ) ; +#65187 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000045300, 18.16749699759753200, -28.20555803803025800 ) ) ; +#65188 = ORIENTED_EDGE ( 'NONE', *, *, #25714, .F. ) ; +#65189 = EDGE_LOOP ( 'NONE', ( #51442, #56688, #52390 ) ) ; +#65190 = AXIS2_PLACEMENT_3D ( 'NONE', #1919, #45407, #8163 ) ; +#65191 = ORIENTED_EDGE ( 'NONE', *, *, #65848, .T. ) ; +#65192 = ORIENTED_EDGE ( 'NONE', *, *, #17933, .T. ) ; +#65193 = EDGE_LOOP ( 'NONE', ( #18349, #72692, #42674 ) ) ; +#65194 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#65195 = ORIENTED_EDGE ( 'NONE', *, *, #24260, .T. ) ; +#65197 = EDGE_LOOP ( 'NONE', ( #11084, #5907, #68112, #24491, #2575, #5226 ) ) ; +#65196 = EDGE_CURVE ( 'NONE', #29561, #45383, #32481, .T. ) ; +#65198 = AXIS2_PLACEMENT_3D ( 'NONE', #76230, #32714, #44912 ) ; +#65199 = AXIS2_PLACEMENT_3D ( 'NONE', #22006, #65551, #28303 ) ; +#65200 = EDGE_LOOP ( 'NONE', ( #31761, #78217, #33789, #28680, #35728, #14055 ) ) ; +#65201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#65202 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65203 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344611100, 49.42298334620778600, -28.20555803802997400 ) ) ; +#65204 = CARTESIAN_POINT ( 'NONE', ( -3.371418216713580700, 90.16749699759768100, -28.25056166218022100 ) ) ; +#65205 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 36.99999999999999300, 9.794441961969996100 ) ) ; +#65206 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 36.46443389862717800, -28.54207364681940000 ) ) ; +#65207 = FACE_OUTER_BOUND ( 'NONE', #60422, .T. ) ; +#65209 = VERTEX_POINT ( 'NONE', #68470 ) ; +#65208 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65210 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086482100, 28.97187418724322000, -28.37194250757536200 ) ) ; +#65211 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819192900, 51.65075715145311400, -28.20555803802997700 ) ) ; +#65212 = ORIENTED_EDGE ( 'NONE', *, *, #174, .T. ) ; +#65213 = ORIENTED_EDGE ( 'NONE', *, *, #19101, .F. ) ; +#65214 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 60.34267608797551900, -28.20555803803047800 ) ) ; +#65215 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65216 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56652, #37872, #69166, #31920 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001246264537621207500 ), + .UNSPECIFIED. ) ; +#65217 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 71.43945992495532900, -28.34042301926881200 ) ) ; +#65218 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#65219 = CARTESIAN_POINT ( 'NONE', ( 3.360598542614474200, 28.66749699759768800, -28.25434854811488300 ) ) ; +#65220 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#65221 = FACE_OUTER_BOUND ( 'NONE', #23722, .T. ) ; +#65222 = ORIENTED_EDGE ( 'NONE', *, *, #20833, .F. ) ; +#65223 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#65224 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46543, #2769, #71335, #9297 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388206713500E-007, 0.0007987676590766554800 ), + .UNSPECIFIED. ) ; +#65225 = EDGE_LOOP ( 'NONE', ( #43055, #21517, #56150, #71084, #47003 ) ) ; +#65226 = ADVANCED_FACE ( 'NONE', ( #4789 ), #19391, .T. ) ; +#65227 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#65228 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#65229 = CARTESIAN_POINT ( 'NONE', ( 17.22127746187991800, 9.569148358746559800, -28.45573375118228300 ) ) ; +#65230 = AXIS2_PLACEMENT_3D ( 'NONE', #47720, #53993, #41487 ) ; +#65231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65232 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, -0.6666666666666626300, -8.133761268305512700 ) ) ; +#65233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65234 = CIRCLE ( 'NONE', #57208, 9.500000000000097700 ) ; +#65235 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305480900, 20.89604671418360800, -28.70555803803002000 ) ) ; +#65236 = ORIENTED_EDGE ( 'NONE', *, *, #46291, .F. ) ; +#65237 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153423900, 60.80000000000002600, -28.55171188418382000 ) ) ; +#65238 = ORIENTED_EDGE ( 'NONE', *, *, #70725, .F. ) ; +#65239 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#65240 = CARTESIAN_POINT ( 'NONE', ( -9.233586726634273500, 94.21601807325079400, -28.37203026796553800 ) ) ; +#65241 = ADVANCED_FACE ( 'NONE', ( #52454 ), #67091, .T. ) ; +#65242 = CARTESIAN_POINT ( 'NONE', ( 4.745342735184423500, 10.00380841767819000, -28.64142799534448600 ) ) ; +#65243 = AXIS2_PLACEMENT_3D ( 'NONE', #44387, #26248, #57222 ) ; +#65244 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65245 = CARTESIAN_POINT ( 'NONE', ( 15.27292969368545700, 85.79999999999985500, -28.53959444491381700 ) ) ; +#65246 = EDGE_CURVE ( 'NONE', #55233, #45068, #18035, .T. ) ; +#65247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65250 = AXIS2_PLACEMENT_3D ( 'NONE', #20635, #64170, #26889 ) ; +#65251 = CARTESIAN_POINT ( 'NONE', ( -5.685965509778303500, 45.54999999999998300, -28.37321477197630400 ) ) ; +#65252 = FACE_OUTER_BOUND ( 'NONE', #32917, .T. ) ; +#65253 = ADVANCED_FACE ( 'NONE', ( #29205 ), #33992, .T. ) ; +#65254 = FACE_OUTER_BOUND ( 'NONE', #62575, .T. ) ; +#65255 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65256 = VERTEX_POINT ( 'NONE', #25774 ) ; +#65257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65260 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467482000, 9.268939712926288300, -28.57333386110744300 ) ) ; +#65261 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#65262 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372571600, 77.93535825203869600, -28.53896444442243300 ) ) ; +#65263 = ADVANCED_FACE ( 'NONE', ( #21367 ), #877, .F. ) ; +#65264 = FACE_OUTER_BOUND ( 'NONE', #4820, .T. ) ; +#65265 = VERTEX_POINT ( 'NONE', #979 ) ; +#65266 = EDGE_LOOP ( 'NONE', ( #16387, #38101, #66128, #12158 ) ) ; +#65267 = EDGE_CURVE ( 'NONE', #17250, #58100, #50491, .T. ) ; +#65268 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#65269 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 8.666666666666682100, 4.294441961969993400 ) ) ; +#65271 = ORIENTED_EDGE ( 'NONE', *, *, #59049, .F. ) ; +#65270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22388, #59665, #34915, #78430 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634425460600E-007, 0.0008082706238601853400 ), + .UNSPECIFIED. ) ; +#65272 = LINE ( 'NONE', #43228, #5845 ) ; +#65273 = EDGE_CURVE ( 'NONE', #11374, #32971, #3546, .T. ) ; +#65274 = ORIENTED_EDGE ( 'NONE', *, *, #80021, .T. ) ; +#65275 = VERTEX_POINT ( 'NONE', #57035 ) ; +#65276 = ORIENTED_EDGE ( 'NONE', *, *, #18984, .F. ) ; +#65277 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65278 = ORIENTED_EDGE ( 'NONE', *, *, #38146, .F. ) ; +#65280 = ORIENTED_EDGE ( 'NONE', *, *, #61712, .T. ) ; +#65279 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65281 = ORIENTED_EDGE ( 'NONE', *, *, #24785, .F. ) ; +#65282 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44001, #31821, #38030, #773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397355176400E-007, 0.0003301092607755730400 ), + .UNSPECIFIED. ) ; +#65283 = ORIENTED_EDGE ( 'NONE', *, *, #26314, .F. ) ; +#65284 = ADVANCED_FACE ( 'NONE', ( #37867 ), #32045, .F. ) ; +#65285 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 43.00000000000001400, -1.205558038030002800 ) ) ; +#65286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65287 = EDGE_CURVE ( 'NONE', #5316, #74091, #48551, .T. ) ; +#65288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65289 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 8.000000000000007100, -1.205558038030005300 ) ) ; +#65290 = EDGE_CURVE ( 'NONE', #1022, #74526, #69866, .T. ) ; +#65291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8689, #15247, #34003, #77524 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711478392300E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#65293 = ORIENTED_EDGE ( 'NONE', *, *, #36422, .T. ) ; +#65292 = AXIS2_PLACEMENT_3D ( 'NONE', #57840, #20586, #64127 ) ; +#65294 = CARTESIAN_POINT ( 'NONE', ( 4.239894507328259900, 69.66414768974007600, -28.38420446581323700 ) ) ; +#65295 = CIRCLE ( 'NONE', #70844, 10.50000000000009900 ) ; +#65296 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#65297 = EDGE_LOOP ( 'NONE', ( #35103, #21160, #37823, #2067 ) ) ; +#65298 = ORIENTED_EDGE ( 'NONE', *, *, #73968, .F. ) ; +#65299 = EDGE_CURVE ( 'NONE', #56019, #48486, #17452, .T. ) ; +#65300 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#65301 = ORIENTED_EDGE ( 'NONE', *, *, #20353, .F. ) ; +#65302 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65303 = ORIENTED_EDGE ( 'NONE', *, *, #79332, .F. ) ; +#65304 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 45.33333333333333600, -6.705558038030005700 ) ) ; +#65305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65306 = VERTEX_POINT ( 'NONE', #63578 ) ; +#65307 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65308 = FACE_OUTER_BOUND ( 'NONE', #77434, .T. ) ; +#65309 = AXIS2_PLACEMENT_3D ( 'NONE', #72390, #16348, #47572 ) ; +#65310 = EDGE_LOOP ( 'NONE', ( #11183, #44137, #39366 ) ) ; +#65311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10191, #47412, #59984, #22709 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810838200, 0.0005317208426588582300 ), + .UNSPECIFIED. ) ; +#65312 = EDGE_CURVE ( 'NONE', #14529, #32055, #55407, .T. ) ; +#65313 = EDGE_CURVE ( 'NONE', #39956, #57912, #35942, .T. ) ; +#65314 = EDGE_CURVE ( 'NONE', #60567, #43565, #40961, .T. ) ; +#65315 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#65316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#65317 = AXIS2_PLACEMENT_3D ( 'NONE', #62459, #25187, #68700 ) ; +#65318 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65319 = CONICAL_SURFACE ( 'NONE', #38360, 10.50000000000009200, 0.7853981633974482800 ) ; +#65320 = EDGE_LOOP ( 'NONE', ( #22958, #65500, #24875, #50848, #70156, #42735 ) ) ; +#65321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65322 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65324 = ORIENTED_EDGE ( 'NONE', *, *, #73614, .F. ) ; +#65325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65326 = CARTESIAN_POINT ( 'NONE', ( -3.452142414356148800, 9.001892960388811800, -28.65770045238616200 ) ) ; +#65327 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999949400, 20.96823913367206800, -28.70555803802995200 ) ) ; +#65328 = EDGE_CURVE ( 'NONE', #40791, #22541, #26521, .T. ) ; +#65329 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459498000, 69.08026449164323400, -28.70555803803005200 ) ) ; +#65330 = AXIS2_PLACEMENT_3D ( 'NONE', #3765, #10040, #53560 ) ; +#65331 = CARTESIAN_POINT ( 'NONE', ( 3.628494729608143600, 61.43250300240213600, -28.25053119339297700 ) ) ; +#65332 = AXIS2_PLACEMENT_3D ( 'NONE', #29784, #73274, #36009 ) ; +#65333 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54303, #29345, #66833, #29596 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007565042193418582300, 0.001049055495481835600 ), + .UNSPECIFIED. ) ; +#65334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65335 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65336 = CONICAL_SURFACE ( 'NONE', #9879, 10.50000000000009600, 0.7853981633974518300 ) ; +#65337 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 48.83333333333331400, 6.794441961969992500 ) ) ; +#65338 = VERTEX_POINT ( 'NONE', #20572 ) ; +#65339 = ORIENTED_EDGE ( 'NONE', *, *, #52610, .T. ) ; +#65340 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#65341 = EDGE_LOOP ( 'NONE', ( #7229, #964, #46611 ) ) ; +#65342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65343 = ADVANCED_FACE ( 'NONE', ( #25263 ), #30127, .F. ) ; +#65344 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65345 = AXIS2_PLACEMENT_3D ( 'NONE', #48130, #10905, #54407 ) ; +#65346 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#65347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65348 = CIRCLE ( 'NONE', #52850, 10.50000000000009800 ) ; +#65349 = AXIS2_PLACEMENT_3D ( 'NONE', #65725, #59465, #34448 ) ; +#65350 = ORIENTED_EDGE ( 'NONE', *, *, #32331, .T. ) ; +#65351 = VERTEX_POINT ( 'NONE', #20843 ) ; +#65352 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#65353 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 50.16666666666667900, -3.349151577478988200 ) ) ; +#65354 = ADVANCED_FACE ( 'NONE', ( #15503 ), #77771, .T. ) ; +#65355 = EDGE_CURVE ( 'NONE', #70543, #25269, #13569, .T. ) ; +#65356 = FACE_OUTER_BOUND ( 'NONE', #76065, .T. ) ; +#65357 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#65358 = ORIENTED_EDGE ( 'NONE', *, *, #17929, .F. ) ; +#65359 = AXIS2_PLACEMENT_3D ( 'NONE', #42698, #5461, #48941 ) ; +#65360 = VERTEX_POINT ( 'NONE', #45537 ) ; +#65361 = VERTEX_POINT ( 'NONE', #58365 ) ; +#65362 = ADVANCED_FACE ( 'NONE', ( #65163 ), #28182, .T. ) ; +#65363 = EDGE_LOOP ( 'NONE', ( #76317, #59744, #52798 ) ) ; +#65364 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 14.00000000000001200, -9.205558038030005700 ) ) ; +#65365 = CARTESIAN_POINT ( 'NONE', ( 20.06774992035342800, 94.13386451617638800, -27.32643203531375400 ) ) ; +#65366 = CONICAL_SURFACE ( 'NONE', #50464, 10.50000000000009600, 0.7853981633974482800 ) ; +#65367 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#65368 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#65369 = ADVANCED_FACE ( 'NONE', ( #63200 ), #70865, .T. ) ; +#65370 = CIRCLE ( 'NONE', #29664, 9.500000000000095900 ) ; +#65371 = AXIS2_PLACEMENT_3D ( 'NONE', #21336, #64866, #27595 ) ; +#65372 = ORIENTED_EDGE ( 'NONE', *, *, #79275, .F. ) ; +#65373 = ORIENTED_EDGE ( 'NONE', *, *, #16159, .T. ) ; +#65374 = ORIENTED_EDGE ( 'NONE', *, *, #29113, .F. ) ; +#65375 = VERTEX_POINT ( 'NONE', #52337 ) ; +#65376 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825477500, 70.16054007504466500, -28.34042301926890100 ) ) ; +#65377 = EDGE_LOOP ( 'NONE', ( #59348, #46294, #75844, #20665, #74372 ) ) ; +#65378 = FACE_OUTER_BOUND ( 'NONE', #1502, .T. ) ; +#65379 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 17.33333333333333900, 3.124568980892187500 ) ) ; +#65380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65382 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195349300, 10.41634594406197300, -28.35038903107271200 ) ) ; +#65383 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192848700, 66.79999999999998300, -28.70555803802997700 ) ) ; +#65384 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 57.50000000000000700, 4.650848422521012700 ) ) ; +#65385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37962, #710, #56746, #19494 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.006877718201233408100, 0.007919184322923263800 ), + .UNSPECIFIED. ) ; +#65386 = CARTESIAN_POINT ( 'NONE', ( -3.695716148419048100E-014, 87.46443389862712100, -28.54207364681949200 ) ) ; +#65387 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484970800, 62.31032580520965100, -28.59353418718926000 ) ) ; +#65388 = EDGE_CURVE ( 'NONE', #66852, #9809, #44622, .T. ) ; +#65389 = CIRCLE ( 'NONE', #18028, 10.00000000000009400 ) ; +#65390 = VERTEX_POINT ( 'NONE', #46089 ) ; +#65391 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343285500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#65392 = EDGE_CURVE ( 'NONE', #37884, #70786, #46595, .T. ) ; +#65393 = CARTESIAN_POINT ( 'NONE', ( 17.14726587474175900, 10.36172549728292400, -28.47230003642280100 ) ) ; +#65394 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999961600, 73.89610994602591600, -28.37519436813230600 ) ) ; +#65395 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#65396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12785, #49981, #25288, #68789 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467950256755000E-007, 0.0007331043932795654300 ), + .UNSPECIFIED. ) ; +#65397 = EDGE_CURVE ( 'NONE', #11140, #13621, #2827, .T. ) ; +#65398 = CARTESIAN_POINT ( 'NONE', ( -3.609628343099456700, 8.516676710273198800, -28.59744054000112000 ) ) ; +#65399 = EDGE_CURVE ( 'NONE', #73316, #15774, #79729, .T. ) ; +#65400 = EDGE_CURVE ( 'NONE', #32617, #39817, #61260, .T. ) ; +#65401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65402 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65403 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17377, #54890, #73675, #36381 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377688354248200E-007, 0.0007331055842533627700 ), + .UNSPECIFIED. ) ; +#65404 = VERTEX_POINT ( 'NONE', #40388 ) ; +#65405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65406 = ORIENTED_EDGE ( 'NONE', *, *, #39364, .F. ) ; +#65407 = ORIENTED_EDGE ( 'NONE', *, *, #31525, .T. ) ; +#65408 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#65409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#65410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65411 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819371400, 79.94924284854695900, -28.20555803802997700 ) ) ; +#65412 = CARTESIAN_POINT ( 'NONE', ( 2.107689023311820600E-013, 67.94142842854276400, -28.20555803802997700 ) ) ; +#65413 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877846100, 41.02667319908791700, -28.37233769390156400 ) ) ; +#65414 = AXIS2_PLACEMENT_3D ( 'NONE', #32562, #39060, #1798 ) ; +#65415 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#65416 = EDGE_CURVE ( 'NONE', #66318, #60797, #12056, .T. ) ; +#65417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65418 = EDGE_CURVE ( 'NONE', #6076, #56745, #78379, .T. ) ; +#65419 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52542, #58554, #77316, #15312 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386350713900, 0.0008131256040088924300 ), + .UNSPECIFIED. ) ; +#65420 = EDGE_CURVE ( 'NONE', #18178, #72453, #11612, .T. ) ; +#65421 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#65422 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65423 = CIRCLE ( 'NONE', #61706, 10.50000000000009600 ) ; +#65424 = ORIENTED_EDGE ( 'NONE', *, *, #60856, .F. ) ; +#65425 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65426 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65427 = VERTEX_POINT ( 'NONE', #12395 ) ; +#65428 = AXIS2_PLACEMENT_3D ( 'NONE', #59148, #46889, #65460 ) ; +#65429 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459548200, 69.08026449164336200, -28.70555803802997700 ) ) ; +#65430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65431 = ORIENTED_EDGE ( 'NONE', *, *, #74671, .T. ) ; +#65432 = CIRCLE ( 'NONE', #49983, 10.00000000000009200 ) ; +#65433 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192773200, 74.80000000000006800, -28.70555803802997700 ) ) ; +#65434 = ORIENTED_EDGE ( 'NONE', *, *, #34048, .F. ) ; +#65436 = ORIENTED_EDGE ( 'NONE', *, *, #19847, .F. ) ; +#65435 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432826800, 9.746602415621900700, -28.20555803802992800 ) ) ; +#65437 = VERTEX_POINT ( 'NONE', #55876 ) ; +#65438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65439 = AXIS2_PLACEMENT_3D ( 'NONE', #12644, #56130, #49852 ) ; +#65440 = CARTESIAN_POINT ( 'NONE', ( -16.80855915145289000, 79.73198281203404700, -28.34169759783695900 ) ) ; +#65441 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#65442 = AXIS2_PLACEMENT_3D ( 'NONE', #55026, #73810, #36519 ) ; +#65443 = FACE_OUTER_BOUND ( 'NONE', #41411, .T. ) ; +#65444 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65445 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269463100, 60.01262610361158800, -28.29936525552457000 ) ) ; +#65446 = FACE_OUTER_BOUND ( 'NONE', #63307, .T. ) ; +#65447 = ORIENTED_EDGE ( 'NONE', *, *, #41634, .F. ) ; +#65448 = EDGE_LOOP ( 'NONE', ( #17578, #79124, #9421 ) ) ; +#65449 = ORIENTED_EDGE ( 'NONE', *, *, #62398, .T. ) ; +#65450 = CIRCLE ( 'NONE', #12201, 10.00000000000009200 ) ; +#65451 = ORIENTED_EDGE ( 'NONE', *, *, #55737, .T. ) ; +#65452 = ADVANCED_FACE ( 'NONE', ( #26216 ), #24241, .F. ) ; +#65453 = CIRCLE ( 'NONE', #27935, 9.500000000000095900 ) ; +#65454 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 63.50000000000000000, 4.650848422521016300 ) ) ; +#65455 = AXIS2_PLACEMENT_3D ( 'NONE', #34483, #21966, #59216 ) ; +#65456 = EDGE_CURVE ( 'NONE', #54395, #1780, #40773, .T. ) ; +#65457 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#65458 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3856, #78424, #34905, #47358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473286277920800E-007, 0.0007303759720926909700 ), + .UNSPECIFIED. ) ; +#65459 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999947600, 38.63176086632791600, -28.70555803802995200 ) ) ; +#65460 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65461 = ADVANCED_FACE ( 'NONE', ( #9641 ), #55361, .F. ) ; +#65462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65463 = FACE_OUTER_BOUND ( 'NONE', #61820, .T. ) ; +#65464 = ORIENTED_EDGE ( 'NONE', *, *, #3272, .T. ) ; +#65465 = ORIENTED_EDGE ( 'NONE', *, *, #52611, .F. ) ; +#65466 = EDGE_CURVE ( 'NONE', #28066, #66847, #7653, .T. ) ; +#65467 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451024800, 18.15930907398604800, -28.35186440610868200 ) ) ; +#65468 = AXIS2_PLACEMENT_3D ( 'NONE', #58044, #8511, #45762 ) ; +#65469 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627435500, 53.66464174796075100, -28.53896444442202500 ) ) ; +#65470 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905200, 84.83849307182669000, -28.68631150211663400 ) ) ; +#65471 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#65472 = ADVANCED_FACE ( 'NONE', ( #57324 ), #5736, .T. ) ; +#65473 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 87.22261628933227900, -28.70555803803030800 ) ) ; +#65474 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 34.83333333333333600, -12.20555803803000600 ) ) ; +#65475 = AXIS2_PLACEMENT_3D ( 'NONE', #12924, #56413, #19166 ) ; +#65476 = CARTESIAN_POINT ( 'NONE', ( 4.180827656327485500, 9.542716366279592000, -28.36017162544790800 ) ) ; +#65477 = CARTESIAN_POINT ( 'NONE', ( -8.899882735204307900, 35.05000000000000400, -28.53808257741932800 ) ) ; +#65478 = VERTEX_POINT ( 'NONE', #12922 ) ; +#65479 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567159000, 39.35339758437810100, -28.20555803802995200 ) ) ; +#65480 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65482 = ORIENTED_EDGE ( 'NONE', *, *, #32851, .F. ) ; +#65481 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65484 = AXIS2_PLACEMENT_3D ( 'NONE', #65703, #28472, #71961 ) ; +#65485 = CARTESIAN_POINT ( 'NONE', ( -11.03592035693671900, 20.59789380924897300, -28.25343951603328200 ) ) ; +#65486 = FACE_OUTER_BOUND ( 'NONE', #41441, .T. ) ; +#65487 = ORIENTED_EDGE ( 'NONE', *, *, #35659, .F. ) ; +#65488 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000004400, 22.99926474563216100, -28.70555803802995200 ) ) ; +#65489 = CONICAL_SURFACE ( 'NONE', #50830, 10.50000000000009600, 0.7853981633974500600 ) ; +#65490 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846310500, 80.79999999999998300, -28.55171188418376400 ) ) ; +#65492 = EDGE_CURVE ( 'NONE', #4205, #43413, #63916, .T. ) ; +#65491 = VERTEX_POINT ( 'NONE', #62690 ) ; +#65493 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, -2.833333333333316600, 6.794441961969992500 ) ) ; +#65494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65495 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65496 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65497 = CONICAL_SURFACE ( 'NONE', #12679, 10.50000000000009600, 0.7853981633974500600 ) ; +#65498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #210, #735, #19531, #63053 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662945000 ), + .UNSPECIFIED. ) ; +#65499 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .F. ) ; +#65500 = ORIENTED_EDGE ( 'NONE', *, *, #58214, .F. ) ; +#65501 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 36.94142842854297000, -28.20555803802995200 ) ) ; +#65502 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#65503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65504 = CARTESIAN_POINT ( 'NONE', ( 3.073496928715955700, 61.37839075872577900, -28.29547734244345800 ) ) ; +#65505 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 41.61077422949657000, -28.37255355648634500 ) ) ; +#65506 = CONICAL_SURFACE ( 'NONE', #38932, 10.50000000000009400, 0.7853981633974500600 ) ; +#65507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65508 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65509 = ORIENTED_EDGE ( 'NONE', *, *, #53337, .T. ) ; +#65510 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#65511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65512 = EDGE_CURVE ( 'NONE', #37269, #27378, #59275, .T. ) ; +#65513 = CIRCLE ( 'NONE', #59800, 9.500000000000097700 ) ; +#65514 = ORIENTED_EDGE ( 'NONE', *, *, #71788, .F. ) ; +#65515 = VERTEX_POINT ( 'NONE', #50126 ) ; +#65516 = PLANE ( 'NONE', #53079 ) ; +#65517 = VERTEX_POINT ( 'NONE', #19428 ) ; +#65518 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65519 = CONICAL_SURFACE ( 'NONE', #64289, 10.50000000000009800, 0.7853981633974518300 ) ; +#65520 = ORIENTED_EDGE ( 'NONE', *, *, #78366, .F. ) ; +#65521 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#65522 = FACE_OUTER_BOUND ( 'NONE', #29899, .T. ) ; +#65523 = AXIS2_PLACEMENT_3D ( 'NONE', #42645, #5413, #48887 ) ; +#65524 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65525 = EDGE_CURVE ( 'NONE', #7301, #42164, #49393, .T. ) ; +#65526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65527 = EDGE_CURVE ( 'NONE', #75589, #893, #38797, .T. ) ; +#65528 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#65529 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60198, #22918, #66447, #29222 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141654655600 ), + .UNSPECIFIED. ) ; +#65530 = ADVANCED_FACE ( 'NONE', ( #42707 ), #20338, .F. ) ; +#65531 = ORIENTED_EDGE ( 'NONE', *, *, #11436, .T. ) ; +#65532 = ORIENTED_EDGE ( 'NONE', *, *, #79926, .T. ) ; +#65533 = EDGE_CURVE ( 'NONE', #13600, #34215, #53423, .T. ) ; +#65534 = AXIS2_PLACEMENT_3D ( 'NONE', #4414, #79229, #72972 ) ; +#65535 = CARTESIAN_POINT ( 'NONE', ( 2.198586935028790500, 94.72249899919930300, -28.20555803802997700 ) ) ; +#65536 = CONICAL_SURFACE ( 'NONE', #10651, 10.50000000000009200, 0.7853981633974482800 ) ; +#65537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65538 = ORIENTED_EDGE ( 'NONE', *, *, #18438, .F. ) ; +#65539 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 6.500000000000005300, -9.258116921287651700 ) ) ; +#65540 = CIRCLE ( 'NONE', #49301, 10.50000000000009600 ) ; +#65541 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109121200, 71.10236277681498500, -28.32100408376067300 ) ) ; +#65542 = ADVANCED_FACE ( 'NONE', ( #36857 ), #3773, .T. ) ; +#65543 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 40.83333333333334300, 0.1341879241256075400 ) ) ; +#65544 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849313900, 30.82033471810043700, -28.30868034705251200 ) ) ; +#65545 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65546 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2978, #64773, #15513, #59020 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276991208600E-007, 0.0007677744771234629600 ), + .UNSPECIFIED. ) ; +#65547 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537155500, 90.34267608797567600, -28.20555803802997700 ) ) ; +#65548 = EDGE_CURVE ( 'NONE', #66489, #36794, #34997, .T. ) ; +#65549 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 5.833333333333356100, 0.9380355014189731800 ) ) ; +#65550 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019287000, 54.79999999999947100, -28.70555803803047500 ) ) ; +#65551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65552 = CARTESIAN_POINT ( 'NONE', ( 5.476989586464650700, 44.44999999999999600, 4.910785080153268600 ) ) ; +#65553 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 43.16666666666668600, 1.741883078712356500 ) ) ; +#65554 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856433700, 40.05333467158439500, -28.65803483468292300 ) ) ; +#65555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65556 = ORIENTED_EDGE ( 'NONE', *, *, #65290, .T. ) ; +#65557 = EDGE_CURVE ( 'NONE', #46138, #27143, #69950, .T. ) ; +#65558 = AXIS2_PLACEMENT_3D ( 'NONE', #13590, #57089, #19827 ) ; +#65559 = AXIS2_PLACEMENT_3D ( 'NONE', #77616, #21872, #27887 ) ; +#65560 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 38.98922577050341700, -28.37255355648631600 ) ) ; +#65561 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#65562 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.15857157145701200, -28.20555803802994200 ) ) ; +#65563 = ADVANCED_FACE ( 'NONE', ( #22289 ), #1804, .T. ) ; +#65564 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567146100, 39.35339758437810100, -28.20555803802995200 ) ) ; +#65565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65566 = FACE_OUTER_BOUND ( 'NONE', #75582, .T. ) ; +#65567 = ORIENTED_EDGE ( 'NONE', *, *, #62276, .T. ) ; +#65568 = CIRCLE ( 'NONE', #63883, 9.500000000000099500 ) ; +#65569 = ORIENTED_EDGE ( 'NONE', *, *, #66325, .T. ) ; +#65570 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65571 = EDGE_LOOP ( 'NONE', ( #1209, #27050, #79301 ) ) ; +#65572 = CIRCLE ( 'NONE', #50633, 10.50000000000009800 ) ; +#65573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65659, #28148, #22125, #28423 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191440981100E-007, 0.0006649560044144099900 ), + .UNSPECIFIED. ) ; +#65574 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.16749699759768800, -28.20555803802997700 ) ) ; +#65575 = ORIENTED_EDGE ( 'NONE', *, *, #72914, .T. ) ; +#65576 = CARTESIAN_POINT ( 'NONE', ( -17.03178561562176100, 81.31767869357339900, -28.25052235028429900 ) ) ; +#65577 = EDGE_LOOP ( 'NONE', ( #46866, #70511, #65449, #36170, #73830, #76210, #54756, #76003 ) ) ; +#65578 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65579 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 28.66749699759768800, -28.23966044827352200 ) ) ; +#65580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65581 = PLANE ( 'NONE', #24001 ) ; +#65582 = CONICAL_SURFACE ( 'NONE', #11799, 10.00000000000009400, 0.7853981633974447300 ) ; +#65583 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 89.97246552159111800, -28.38801640354855100 ) ) ; +#65584 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567146500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#65585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65586 = ORIENTED_EDGE ( 'NONE', *, *, #36651, .T. ) ; +#65587 = AXIS2_PLACEMENT_3D ( 'NONE', #69617, #32362, #75881 ) ; +#65588 = FACE_OUTER_BOUND ( 'NONE', #25680, .T. ) ; +#65589 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 46.66666666666668600, -8.133761268305512700 ) ) ; +#65590 = EDGE_LOOP ( 'NONE', ( #78119, #6888, #10447, #56482 ) ) ; +#65591 = VERTEX_POINT ( 'NONE', #7697 ) ; +#65592 = ORIENTED_EDGE ( 'NONE', *, *, #55210, .F. ) ; +#65593 = EDGE_LOOP ( 'NONE', ( #79721, #66563, #38228 ) ) ; +#65594 = CIRCLE ( 'NONE', #7975, 10.50000000000009600 ) ; +#65595 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 30.74660241562189700, -28.20555803802995200 ) ) ; +#65596 = PLANE ( 'NONE', #48538 ) ; +#65597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65598 = ORIENTED_EDGE ( 'NONE', *, *, #30339, .T. ) ; +#65599 = ORIENTED_EDGE ( 'NONE', *, *, #49584, .F. ) ; +#65600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65601 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65602 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 52.33333333333334300, 2.794441961969998300 ) ) ; +#65603 = VERTEX_POINT ( 'NONE', #57490 ) ; +#65604 = CIRCLE ( 'NONE', #27907, 10.50000000000009600 ) ; +#65605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65606 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032400, 30.94069092601377900, -28.35186440610858200 ) ) ; +#65607 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 11.83333333333333900, 6.794441961969992500 ) ) ; +#65608 = CARTESIAN_POINT ( 'NONE', ( 22.70504496601657600, 95.45251563193529900, -25.08006354188307800 ) ) ; +#65609 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#65610 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26186, #63445, #75928, #38634 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367409971200, 0.0005556746457764486300 ), + .UNSPECIFIED. ) ; +#65611 = ADVANCED_FACE ( 'NONE', ( #71945 ), #49478, .F. ) ; +#65612 = CIRCLE ( 'NONE', #11739, 10.00000000000009200 ) ; +#65613 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65614 = EDGE_CURVE ( 'NONE', #44504, #25026, #20517, .T. ) ; +#65615 = VERTEX_POINT ( 'NONE', #38963 ) ; +#65616 = ADVANCED_FACE ( 'NONE', ( #51426 ), #16443, .T. ) ; +#65617 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 15.16666666666667500, -6.205558038030004800 ) ) ; +#65618 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65619 = ORIENTED_EDGE ( 'NONE', *, *, #1375, .F. ) ; +#65620 = EDGE_CURVE ( 'NONE', #42984, #57731, #6060, .T. ) ; +#65621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65622 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 55.33333333333334300, -8.133761268305512700 ) ) ; +#65623 = EDGE_CURVE ( 'NONE', #780, #76219, #66089, .T. ) ; +#65624 = CONICAL_SURFACE ( 'NONE', #56301, 10.00000000000009200, 0.7853981633974447300 ) ; +#65625 = ORIENTED_EDGE ( 'NONE', *, *, #6590, .T. ) ; +#65626 = AXIS2_PLACEMENT_3D ( 'NONE', #22779, #66306, #29083 ) ; +#65627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65628 = CIRCLE ( 'NONE', #43467, 9.500000000000097700 ) ; +#65629 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#65630 = ORIENTED_EDGE ( 'NONE', *, *, #22105, .F. ) ; +#65631 = ADVANCED_FACE ( 'NONE', ( #32969 ), #47537, .T. ) ; +#65632 = FACE_OUTER_BOUND ( 'NONE', #39778, .T. ) ; +#65633 = CIRCLE ( 'NONE', #4379, 10.50000000000009600 ) ; +#65634 = CARTESIAN_POINT ( 'NONE', ( 1.314034490221690300, 24.54999999999998600, -28.37321477197628300 ) ) ; +#65635 = ORIENTED_EDGE ( 'NONE', *, *, #23065, .F. ) ; +#65636 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052319300, 80.28233213024637400, -28.25051428653865000 ) ) ; +#65637 = ORIENTED_EDGE ( 'NONE', *, *, #56305, .F. ) ; +#65638 = EDGE_LOOP ( 'NONE', ( #32153, #76699, #18280, #64903 ) ) ; +#65639 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900948300, 31.03732497909461700, -28.41043597897462200 ) ) ; +#65640 = AXIS2_PLACEMENT_3D ( 'NONE', #7691, #38961, #69983 ) ; +#65641 = EDGE_CURVE ( 'NONE', #8912, #32519, #80670, .T. ) ; +#65642 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#65643 = EDGE_CURVE ( 'NONE', #21775, #22562, #68021, .T. ) ; +#65644 = EDGE_CURVE ( 'NONE', #28540, #20372, #64152, .T. ) ; +#65645 = ADVANCED_FACE ( 'NONE', ( #18392 ), #45570, .T. ) ; +#65646 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 43.20037755566823300, -28.53664883431611400 ) ) ; +#65648 = CONICAL_SURFACE ( 'NONE', #28996, 10.50000000000009600, 0.7853981633974500600 ) ; +#65647 = AXIS2_PLACEMENT_3D ( 'NONE', #1261, #44739, #7511 ) ; +#65649 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571438600, 71.52858243452105600, -28.70555803802997700 ) ) ; +#65650 = ORIENTED_EDGE ( 'NONE', *, *, #44048, .F. ) ; +#65651 = VECTOR ( 'NONE', #76185, 1000.000000000000000 ) ; +#65652 = EDGE_LOOP ( 'NONE', ( #58840, #11112, #42168, #38028 ) ) ; +#65653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65654 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 27.12623792124938000, -28.70555803802994200 ) ) ; +#65655 = ORIENTED_EDGE ( 'NONE', *, *, #11176, .F. ) ; +#65656 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188400, 59.60439022488282000, -28.70555803803047500 ) ) ; +#65657 = ORIENTED_EDGE ( 'NONE', *, *, #47154, .F. ) ; +#65658 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65659 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 81.25732391202397800, -28.20555803802997700 ) ) ; +#65660 = EDGE_LOOP ( 'NONE', ( #18681, #34701, #38412, #59822 ) ) ; +#65661 = AXIS2_PLACEMENT_3D ( 'NONE', #48556, #11354, #54837 ) ; +#65662 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3530, #78082, #78360, #41079 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446044039800E-007, 0.0002745498510224169400 ), + .UNSPECIFIED. ) ; +#65663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65664 = ORIENTED_EDGE ( 'NONE', *, *, #30470, .F. ) ; +#65665 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 59.77559325427183300, -28.45987523529581900 ) ) ; +#65666 = EDGE_CURVE ( 'NONE', #23333, #4680, #78741, .T. ) ; +#65667 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846314900, 70.79999999999998300, -28.55171188418376000 ) ) ; +#65668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65669 = CIRCLE ( 'NONE', #4313, 10.50000000000009200 ) ; +#65670 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#65671 = PLANE ( 'NONE', #28610 ) ; +#65672 = AXIS2_PLACEMENT_3D ( 'NONE', #78840, #41549, #35330 ) ; +#65673 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65674 = AXIS2_PLACEMENT_3D ( 'NONE', #44374, #50650, #897 ) ; +#65675 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65676 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702742200, 72.22511094383837400, -28.55192314908417100 ) ) ; +#65677 = CARTESIAN_POINT ( 'NONE', ( 4.502075021551530800, 50.60145251508584600, -28.70555803803014400 ) ) ; +#65678 = ORIENTED_EDGE ( 'NONE', *, *, #17504, .F. ) ; +#65679 = CARTESIAN_POINT ( 'NONE', ( -24.98505944807304500, 96.99417846008651600, -19.26319829774765700 ) ) ; +#65680 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#65681 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997500, 91.25227248018305200, -28.70555803803016200 ) ) ; +#65682 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65683 = ORIENTED_EDGE ( 'NONE', *, *, #69418, .F. ) ; +#65684 = FACE_OUTER_BOUND ( 'NONE', #40191, .T. ) ; +#65685 = AXIS2_PLACEMENT_3D ( 'NONE', #6023, #18528, #62061 ) ; +#65686 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528145500, 30.96868088498121800, -28.51286550264512000 ) ) ; +#65687 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65688 = CARTESIAN_POINT ( 'NONE', ( 8.314034490221693800, 45.54999999999998300, -28.37321477197630800 ) ) ; +#65689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65690 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390037600, 60.13716795162663000, -28.48697406221648600 ) ) ; +#65691 = AXIS2_PLACEMENT_3D ( 'NONE', #7084, #50582, #13388 ) ; +#65692 = CIRCLE ( 'NONE', #79377, 10.50000000000009600 ) ; +#65693 = EDGE_LOOP ( 'NONE', ( #59721, #27255, #41740, #46407, #74709 ) ) ; +#65694 = CONICAL_SURFACE ( 'NONE', #17685, 10.00000000000009400, 0.7853981633974447300 ) ; +#65695 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 61.33333333333333600, -5.205558038030008400 ) ) ; +#65696 = AXIS2_PLACEMENT_3D ( 'NONE', #17392, #48363, #54644 ) ; +#65697 = ORIENTED_EDGE ( 'NONE', *, *, #78232, .F. ) ; +#65698 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310475700, 51.49769010897087200, -28.61774594594330900 ) ) ; +#65700 = EDGE_LOOP ( 'NONE', ( #58738, #13358, #56345, #36576 ) ) ; +#65699 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345199200, 90.27440177985802400, -28.29986836858028500 ) ) ; +#65701 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4380, #72676, #79195, #41904 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711450371900E-007, 0.0008482615949374469700 ), + .UNSPECIFIED. ) ; +#65702 = EDGE_CURVE ( 'NONE', #2277, #19495, #72404, .T. ) ; +#65703 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#65704 = CONICAL_SURFACE ( 'NONE', #73487, 10.00000000000009200, 0.7853981633974447300 ) ; +#65705 = FACE_OUTER_BOUND ( 'NONE', #73020, .T. ) ; +#65706 = AXIS2_PLACEMENT_3D ( 'NONE', #67510, #30283, #73784 ) ; +#65707 = VERTEX_POINT ( 'NONE', #8496 ) ; +#65708 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019283600, 74.80000000000001100, -28.70555803802997700 ) ) ; +#65709 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70717, #27234, #65870, #28642 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397499300, 0.001517194977238187200 ), + .UNSPECIFIED. ) ; +#65710 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 55.50000000000000700, 4.650848422521016300 ) ) ; +#65711 = ORIENTED_EDGE ( 'NONE', *, *, #25405, .F. ) ; +#65712 = FACE_OUTER_BOUND ( 'NONE', #58360, .T. ) ; +#65713 = ORIENTED_EDGE ( 'NONE', *, *, #12738, .T. ) ; +#65714 = CARTESIAN_POINT ( 'NONE', ( 2.233092656311228100, 85.80000000000262600, -28.70555803802997700 ) ) ; +#65715 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74173, #18393, #37132, #80671 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694917099700E-007, 0.0008724363063896018200 ), + .UNSPECIFIED. ) ; +#65716 = EDGE_LOOP ( 'NONE', ( #29084, #51317, #79476, #45169 ) ) ; +#65717 = ADVANCED_FACE ( 'NONE', ( #62180 ), #76748, .T. ) ; +#65718 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150653200, 49.77966528189954000, -28.30868034705250100 ) ) ; +#65719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65720 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 32.66666666666667100, 8.320721403598824400 ) ) ; +#65721 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55789, #12304, #24800, #68309 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696548212500E-007, 0.0008724363063898874000 ), + .UNSPECIFIED. ) ; +#65722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65723 = CIRCLE ( 'NONE', #46061, 10.00000000000009400 ) ; +#65724 = ORIENTED_EDGE ( 'NONE', *, *, #8252, .T. ) ; +#65725 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#65726 = VECTOR ( 'NONE', #46605, 1000.000000000000000 ) ; +#65727 = EDGE_CURVE ( 'NONE', #39513, #1022, #12537, .T. ) ; +#65728 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65729 = ORIENTED_EDGE ( 'NONE', *, *, #54851, .F. ) ; +#65730 = ADVANCED_FACE ( 'NONE', ( #34954 ), #27138, .T. ) ; +#65731 = VERTEX_POINT ( 'NONE', #77597 ) ; +#65732 = EDGE_CURVE ( 'NONE', #79836, #67211, #57909, .T. ) ; +#65733 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428573000, 47.42318720225497900, -28.70555803802996700 ) ) ; +#65734 = ORIENTED_EDGE ( 'NONE', *, *, #73587, .T. ) ; +#65735 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#65736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65739 = ADVANCED_FACE ( 'NONE', ( #14479 ), #74816, .F. ) ; +#65738 = ORIENTED_EDGE ( 'NONE', *, *, #77547, .F. ) ; +#65740 = CONICAL_SURFACE ( 'NONE', #55747, 10.00000000000009200, 0.7853981633974415100 ) ; +#65741 = ORIENTED_EDGE ( 'NONE', *, *, #68033, .F. ) ; +#65742 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086482900, 20.12812581275677500, -28.37194250757535500 ) ) ; +#65743 = EDGE_CURVE ( 'NONE', #58909, #77240, #10591, .T. ) ; +#65744 = ADVANCED_FACE ( 'NONE', ( #31039 ), #25178, .F. ) ; +#65745 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#65746 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65747 = EDGE_CURVE ( 'NONE', #59491, #74974, #41698, .T. ) ; +#65748 = ORIENTED_EDGE ( 'NONE', *, *, #25880, .F. ) ; +#65749 = CIRCLE ( 'NONE', #61849, 10.00000000000009200 ) ; +#65750 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526974600, 61.58737389638850600, -28.29936525552454200 ) ) ; +#65751 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 67.16666666666665700, -6.205558038030004800 ) ) ; +#65752 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#65753 = EDGE_LOOP ( 'NONE', ( #6451, #21391, #44964 ) ) ; +#65754 = CIRCLE ( 'NONE', #49631, 10.00000000000009600 ) ; +#65755 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507539400, 30.39456479767167000, -28.70555803802995200 ) ) ; +#65756 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074382100, 42.28032162676581900, -28.55467576046957100 ) ) ; +#65757 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 19.30000000000009000, -28.70555803802992800 ) ) ; +#65758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65760 = AXIS2_PLACEMENT_3D ( 'NONE', #62605, #6568, #31606 ) ; +#65761 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999969400, 41.96823913367205000, -28.70555803802997700 ) ) ; +#65762 = EDGE_CURVE ( 'NONE', #11715, #63102, #43634, .T. ) ; +#65763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68968, #25476, #62730, #31727 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083035862000E-007, 0.0003101809493108536800 ), + .UNSPECIFIED. ) ; +#65764 = EDGE_CURVE ( 'NONE', #46776, #27096, #58257, .T. ) ; +#65765 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992500, 38.81066373133501200, -28.53923937255170200 ) ) ; +#65766 = EDGE_CURVE ( 'NONE', #12178, #50530, #43425, .T. ) ; +#65767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65768 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 59.94924284854741400, -28.20555803802997700 ) ) ; +#65769 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537349100, 61.25732391202402700, -28.20555803802997700 ) ) ; +#65770 = CARTESIAN_POINT ( 'NONE', ( -16.99797744636719100, 9.810924020321918300, -28.25433525492746500 ) ) ; +#65771 = AXIS2_PLACEMENT_3D ( 'NONE', #77018, #39750, #2477 ) ; +#65772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65773 = CIRCLE ( 'NONE', #50617, 10.00000000000009200 ) ; +#65774 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65775 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#65776 = EDGE_CURVE ( 'NONE', #45054, #62098, #73900, .T. ) ; +#65777 = ORIENTED_EDGE ( 'NONE', *, *, #56781, .F. ) ; +#65778 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752900, 38.00972971738994500, -28.70555803802995600 ) ) ; +#65779 = FACE_OUTER_BOUND ( 'NONE', #26161, .T. ) ; +#65780 = AXIS2_PLACEMENT_3D ( 'NONE', #9651, #53160, #15908 ) ; +#65781 = AXIS2_PLACEMENT_3D ( 'NONE', #3193, #46690, #9446 ) ; +#65782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65784 = ORIENTED_EDGE ( 'NONE', *, *, #15913, .F. ) ; +#65783 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 53.65857157145681800, -28.20555803803047800 ) ) ; +#65785 = CIRCLE ( 'NONE', #5692, 9.500000000000099500 ) ; +#65786 = CIRCLE ( 'NONE', #27800, 10.50000000000009200 ) ; +#65787 = ORIENTED_EDGE ( 'NONE', *, *, #1775, .T. ) ; +#65788 = CARTESIAN_POINT ( 'NONE', ( 7.074921731553505200E-015, 37.39962244433174000, -28.53664883431607500 ) ) ; +#65789 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 4.333333333333346400, 8.320721403598817300 ) ) ; +#65790 = CONICAL_SURFACE ( 'NONE', #62009, 10.00000000000009400, 0.7853981633974447300 ) ; +#65791 = ORIENTED_EDGE ( 'NONE', *, *, #49252, .F. ) ; +#65792 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807160200, 84.79999999999998300, -28.70555803802997700 ) ) ; +#65793 = ORIENTED_EDGE ( 'NONE', *, *, #46444, .F. ) ; +#65794 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 38.66666666666667100, -3.705558038030004400 ) ) ; +#65795 = AXIS2_PLACEMENT_3D ( 'NONE', #14796, #33565, #39816 ) ; +#65797 = CIRCLE ( 'NONE', #67062, 10.00000000000009400 ) ; +#65796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65798 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 3.666666666666679400, -5.205558038030003100 ) ) ; +#65799 = CIRCLE ( 'NONE', #36675, 10.50000000000009600 ) ; +#65800 = AXIS2_PLACEMENT_3D ( 'NONE', #32047, #56792, #75552 ) ; +#65801 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 71.25732391202376400, -28.20555803803014400 ) ) ; +#65802 = EDGE_LOOP ( 'NONE', ( #53135, #56744, #16711 ) ) ; +#65803 = ORIENTED_EDGE ( 'NONE', *, *, #26430, .F. ) ; +#65804 = CARTESIAN_POINT ( 'NONE', ( 8.865190447464055300, 44.45000000000003800, 0.6327450826015423900 ) ) ; +#65805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65806 = EDGE_CURVE ( 'NONE', #11187, #41798, #29040, .T. ) ; +#65807 = EDGE_LOOP ( 'NONE', ( #56715, #73666, #77338 ) ) ; +#65808 = EDGE_LOOP ( 'NONE', ( #61455, #78617, #64811 ) ) ; +#65809 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 41.00000000000000700, -1.205558038030002800 ) ) ; +#65810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65811 = AXIS2_PLACEMENT_3D ( 'NONE', #33613, #77131, #39865 ) ; +#65812 = ORIENTED_EDGE ( 'NONE', *, *, #31120, .F. ) ; +#65813 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65814 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.68929190448941200, -28.20555803802995200 ) ) ; +#65815 = FACE_OUTER_BOUND ( 'NONE', #71083, .T. ) ; +#65816 = LINE ( 'NONE', #61620, #18109 ) ; +#65817 = ORIENTED_EDGE ( 'NONE', *, *, #66687, .F. ) ; +#65818 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .T. ) ; +#65819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65820 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#65821 = PLANE ( 'NONE', #63839 ) ; +#65822 = CARTESIAN_POINT ( 'NONE', ( 2.466255859631175900, 91.59999999999999400, -28.70555803802999500 ) ) ; +#65823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65825 = ORIENTED_EDGE ( 'NONE', *, *, #48401, .F. ) ; +#65824 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54808, #11326, #61104, #23841 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904305303700E-007, 0.0006651184466334838000 ), + .UNSPECIFIED. ) ; +#65826 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#65827 = FACE_OUTER_BOUND ( 'NONE', #67489, .T. ) ; +#65828 = AXIS2_PLACEMENT_3D ( 'NONE', #54909, #4582, #48070 ) ; +#65829 = CARTESIAN_POINT ( 'NONE', ( 15.98442875286485600, 82.66699492863726600, -28.67024809316606200 ) ) ; +#65830 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65831 = ORIENTED_EDGE ( 'NONE', *, *, #57738, .F. ) ; +#65832 = FACE_OUTER_BOUND ( 'NONE', #46379, .T. ) ; +#65833 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217475800, 60.16054007504465100, -28.34042301926880800 ) ) ; +#65834 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65835 = ADVANCED_FACE ( 'NONE', ( #60240 ), #6666, .F. ) ; +#65836 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#65837 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#65838 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39626, #76895, #52105, #14880 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629347751815500E-007, 0.0007670609591623610500 ), + .UNSPECIFIED. ) ; +#65839 = ORIENTED_EDGE ( 'NONE', *, *, #43172, .F. ) ; +#65840 = ADVANCED_FACE ( 'NONE', ( #72874 ), #54351, .F. ) ; +#65841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65842 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65843 = EDGE_CURVE ( 'NONE', #23983, #26524, #14528, .T. ) ; +#65844 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 44.49999999999999300, 4.650848422521016300 ) ) ; +#65845 = CIRCLE ( 'NONE', #63661, 9.500000000000099500 ) ; +#65846 = ORIENTED_EDGE ( 'NONE', *, *, #54678, .T. ) ; +#65848 = EDGE_CURVE ( 'NONE', #54128, #68448, #46, .T. ) ; +#65847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67621, #24116, #5606, #49083 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625870557024400E-007, 0.0002930369617397713100 ), + .UNSPECIFIED. ) ; +#65849 = FACE_OUTER_BOUND ( 'NONE', #39149, .T. ) ; +#65850 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65851 = ORIENTED_EDGE ( 'NONE', *, *, #9358, .T. ) ; +#65852 = CIRCLE ( 'NONE', #74403, 10.00000000000009200 ) ; +#65853 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#65854 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65855 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65856 = EDGE_CURVE ( 'NONE', #76453, #15551, #29134, .T. ) ; +#65857 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65858 = ORIENTED_EDGE ( 'NONE', *, *, #23684, .F. ) ; +#65859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75113, #62880, #19339, #25626 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964886400, 0.0005839769583134658500 ), + .UNSPECIFIED. ) ; +#65860 = ADVANCED_FACE ( 'NONE', ( #70901 ), #4712, .F. ) ; +#65861 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#65862 = CIRCLE ( 'NONE', #66129, 9.500000000000097700 ) ; +#65863 = CARTESIAN_POINT ( 'NONE', ( -4.035920356936727200, 41.59789380924897300, -28.25343951603330700 ) ) ; +#65864 = CIRCLE ( 'NONE', #19925, 10.00000000000009200 ) ; +#65865 = EDGE_CURVE ( 'NONE', #76162, #61765, #21280, .T. ) ; +#65866 = ORIENTED_EDGE ( 'NONE', *, *, #10705, .T. ) ; +#65867 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 54.50000000000000000, -7.061964498581025000 ) ) ; +#65868 = EDGE_CURVE ( 'NONE', #69682, #20990, #56294, .T. ) ; +#65869 = CARTESIAN_POINT ( 'NONE', ( -3.207944239504963800, 20.90771342879322600, -28.53891855579986700 ) ) ; +#65870 = CARTESIAN_POINT ( 'NONE', ( -2.254657264815460600, 20.50380841767821100, -28.64142799534453200 ) ) ; +#65872 = ORIENTED_EDGE ( 'NONE', *, *, #45782, .F. ) ; +#65871 = CARTESIAN_POINT ( 'NONE', ( 16.84726953868445400, 30.58486215879780800, -28.32821106612155000 ) ) ; +#65873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65874 = EDGE_LOOP ( 'NONE', ( #23156, #60666, #44646, #42679 ) ) ; +#65875 = CARTESIAN_POINT ( 'NONE', ( 24.82062775670587100, 96.51031612387487300, -20.89281363567696200 ) ) ; +#65876 = AXIS2_PLACEMENT_3D ( 'NONE', #24278, #67797, #30554 ) ; +#65877 = EDGE_CURVE ( 'NONE', #13975, #11140, #66397, .T. ) ; +#65878 = EDGE_CURVE ( 'NONE', #41336, #76860, #51878, .T. ) ; +#65879 = EDGE_CURVE ( 'NONE', #70596, #8074, #37789, .T. ) ; +#65880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65881 = CONICAL_SURFACE ( 'NONE', #77784, 10.50000000000009600, 0.7853981633974500600 ) ; +#65882 = ORIENTED_EDGE ( 'NONE', *, *, #72169, .T. ) ; +#65883 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65884 = ORIENTED_EDGE ( 'NONE', *, *, #52136, .F. ) ; +#65885 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65886 = ORIENTED_EDGE ( 'NONE', *, *, #8668, .T. ) ; +#65887 = ORIENTED_EDGE ( 'NONE', *, *, #79336, .T. ) ; +#65888 = EDGE_LOOP ( 'NONE', ( #45137, #70039, #20361, #40955 ) ) ; +#65889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65890 = CIRCLE ( 'NONE', #49995, 10.50000000000009800 ) ; +#65891 = AXIS2_PLACEMENT_3D ( 'NONE', #67754, #42977, #5731 ) ; +#65892 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 13.00000000000001600, 3.794441961969998300 ) ) ; +#65893 = AXIS2_PLACEMENT_3D ( 'NONE', #33600, #77122, #39848 ) ; +#65894 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 40.30000000000008200, -28.70555803802995200 ) ) ; +#65895 = ORIENTED_EDGE ( 'NONE', *, *, #54521, .F. ) ; +#65896 = AXIS2_PLACEMENT_3D ( 'NONE', #26909, #51593, #1843 ) ; +#65897 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 79.81066373133501200, -28.53923937255171900 ) ) ; +#65898 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20600, #64141, #39334, #2069 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278943165600, 0.001517194977238246600 ), + .UNSPECIFIED. ) ; +#65899 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65900 = CARTESIAN_POINT ( 'NONE', ( 1.077747210701861700, 65.79999999999996900, -28.70555803802997700 ) ) ; +#65901 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 53.16666666666667900, 6.794441961969992500 ) ) ; +#65902 = ORIENTED_EDGE ( 'NONE', *, *, #39485, .T. ) ; +#65903 = CONICAL_SURFACE ( 'NONE', #4388, 10.50000000000009600, 0.7853981633974500600 ) ; +#65905 = ORIENTED_EDGE ( 'NONE', *, *, #19852, .F. ) ; +#65904 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#65906 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65907 = ORIENTED_EDGE ( 'NONE', *, *, #11298, .T. ) ; +#65908 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#65909 = CONICAL_SURFACE ( 'NONE', #54783, 10.00000000000009200, 0.7853981633974447300 ) ; +#65910 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65911 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999962700, 74.13556610137271700, -28.54207364681992200 ) ) ; +#65913 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823703100, 42.40456253568395100, -28.61277292027075700 ) ) ; +#65912 = CONICAL_SURFACE ( 'NONE', #73094, 10.00000000000009600, 0.7853981633974447300 ) ; +#65914 = AXIS2_PLACEMENT_3D ( 'NONE', #55791, #18543, #62078 ) ; +#65915 = ORIENTED_EDGE ( 'NONE', *, *, #5340, .F. ) ; +#65916 = ADVANCED_FACE ( 'NONE', ( #39757 ), #67239, .T. ) ; +#65917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65919 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65920 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 51.43250300240195800, -28.20555803803030800 ) ) ; +#65921 = CIRCLE ( 'NONE', #25040, 10.00000000000009200 ) ; +#65922 = EDGE_LOOP ( 'NONE', ( #30355, #11789, #65487, #10494 ) ) ; +#65923 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 26.67143691309411600, -28.36981695106779400 ) ) ; +#65924 = EDGE_CURVE ( 'NONE', #24201, #56798, #68956, .T. ) ; +#65925 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65926 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 71.25732391202396300, -28.20555803802997700 ) ) ; +#65927 = ORIENTED_EDGE ( 'NONE', *, *, #63004, .T. ) ; +#65928 = ORIENTED_EDGE ( 'NONE', *, *, #57979, .T. ) ; +#65929 = EDGE_LOOP ( 'NONE', ( #66959, #39851, #65858, #53694, #54308 ) ) ; +#65930 = ADVANCED_FACE ( 'NONE', ( #52373 ), #50412, .T. ) ; +#65931 = CIRCLE ( 'NONE', #54000, 10.50000000000009600 ) ; +#65932 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#65933 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#65934 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65936 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155100, 80.69966441803876500, -28.70555803803047500 ) ) ; +#65937 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65926, #41152, #59937, #22666 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565737000491700E-007, 0.0002592140922085827400 ), + .UNSPECIFIED. ) ; +#65938 = VERTEX_POINT ( 'NONE', #80019 ) ; +#65939 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65940 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#65941 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384643800, 60.79999999999999700, -28.55171188418380600 ) ) ; +#65942 = AXIS2_PLACEMENT_3D ( 'NONE', #74132, #5852, #49319 ) ; +#65943 = CIRCLE ( 'NONE', #65177, 10.00000000000009200 ) ; +#65944 = ORIENTED_EDGE ( 'NONE', *, *, #73014, .F. ) ; +#65945 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 49.65930907398620800, -28.35186440610858900 ) ) ; +#65946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65435, #40359, #77912, #40630 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537446485025300E-007, 0.0002745498510224178100 ), + .UNSPECIFIED. ) ; +#65947 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650755000, 40.89456479767169100, -28.70555803802996700 ) ) ; +#65948 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65949 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537167900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#65950 = ORIENTED_EDGE ( 'NONE', *, *, #78374, .T. ) ; +#65951 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736718000, 35.04999999999999700, -28.70555803802995200 ) ) ; +#65952 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65953 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65954 = AXIS2_PLACEMENT_3D ( 'NONE', #36730, #5735, #74030 ) ; +#65955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65957 = ADVANCED_FACE ( 'NONE', ( #2738 ), #17381, .F. ) ; +#65958 = FACE_OUTER_BOUND ( 'NONE', #29695, .T. ) ; +#65959 = FACE_OUTER_BOUND ( 'NONE', #58471, .T. ) ; +#65960 = ORIENTED_EDGE ( 'NONE', *, *, #76652, .F. ) ; +#65961 = EDGE_CURVE ( 'NONE', #18877, #70022, #37427, .T. ) ; +#65962 = VERTEX_POINT ( 'NONE', #36473 ) ; +#65963 = VERTEX_POINT ( 'NONE', #36745 ) ; +#65964 = EDGE_LOOP ( 'NONE', ( #38425, #22959, #57063 ) ) ; +#65965 = VERTEX_POINT ( 'NONE', #80279 ) ; +#65966 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 59.16666666666667900, 0.9380355014189834000 ) ) ; +#65967 = ORIENTED_EDGE ( 'NONE', *, *, #46993, .F. ) ; +#65968 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158400, 23.59761904761920400, -28.70555803802994200 ) ) ; +#65969 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#65970 = CONICAL_SURFACE ( 'NONE', #34064, 10.50000000000009900, 0.7853981633974518300 ) ; +#65971 = VERTEX_POINT ( 'NONE', #24006 ) ; +#65972 = EDGE_CURVE ( 'NONE', #63819, #42777, #23232, .T. ) ; +#65974 = EDGE_CURVE ( 'NONE', #56903, #280, #23007, .T. ) ; +#65973 = VERTEX_POINT ( 'NONE', #12017 ) ; +#65975 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65976 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 53.33333333333335700, -5.205558038030015500 ) ) ; +#65977 = ORIENTED_EDGE ( 'NONE', *, *, #19488, .T. ) ; +#65978 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507543800, 50.20543520232829600, -28.70555803802996700 ) ) ; +#65979 = CONICAL_SURFACE ( 'NONE', #56866, 10.00000000000009600, 0.7853981633974447300 ) ; +#65980 = EDGE_CURVE ( 'NONE', #78759, #37113, #8507, .T. ) ; +#65981 = EDGE_CURVE ( 'NONE', #5869, #79210, #74870, .T. ) ; +#65982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65983 = EDGE_CURVE ( 'NONE', #55373, #44921, #60427, .T. ) ; +#65984 = ORIENTED_EDGE ( 'NONE', *, *, #6157, .T. ) ; +#65985 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71072, #27585, #2779, #46281 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799646171300E-007, 0.0005050252131287522600 ), + .UNSPECIFIED. ) ; +#65986 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65988 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 30.50000000000001400, -9.258116921287651700 ) ) ; +#65989 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462824900, 70.34267608797600200, -28.20555803803030800 ) ) ; +#65990 = EDGE_CURVE ( 'NONE', #52833, #27305, #45892, .T. ) ; +#65991 = AXIS2_PLACEMENT_3D ( 'NONE', #7533, #1289, #20088 ) ; +#65992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#65993 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65994 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#65995 = FACE_OUTER_BOUND ( 'NONE', #34367, .T. ) ; +#65996 = VERTEX_POINT ( 'NONE', #74572 ) ; +#65997 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65998 = ORIENTED_EDGE ( 'NONE', *, *, #50800, .T. ) ; +#65999 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101700, 29.79999999999999000, -28.45034744217088400 ) ) ; +#66000 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 73.42856308690588200, -28.36981695106780800 ) ) ; +#66001 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431400, 49.42298334620763700, -28.20555803802997700 ) ) ; +#66002 = FACE_OUTER_BOUND ( 'NONE', #18453, .T. ) ; +#66003 = AXIS2_PLACEMENT_3D ( 'NONE', #46660, #15688, #65231 ) ; +#66004 = AXIS2_PLACEMENT_3D ( 'NONE', #57277, #20032, #63564 ) ; +#66005 = ADVANCED_FACE ( 'NONE', ( #19311 ), #48469, .F. ) ; +#66006 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615356200, 80.79999999999968500, -28.55171188418412200 ) ) ; +#66007 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#66008 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 10.02858243452106100, -28.70555803802994200 ) ) ; +#66009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66010 = CONICAL_SURFACE ( 'NONE', #71348, 10.00000000000009400, 0.7853981633974447300 ) ; +#66011 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 65.00000000000000000, 3.794441961969998300 ) ) ; +#66012 = ORIENTED_EDGE ( 'NONE', *, *, #15460, .T. ) ; +#66013 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714267800, 15.92318720225497600, -28.70555803802992800 ) ) ; +#66014 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66015 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 41.24660241562189400, -28.20555803802996700 ) ) ; +#66016 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79250, #17223, #35995, #79514 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884803000 ), + .UNSPECIFIED. ) ; +#66017 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#66018 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609138100, 90.13716795162604000, -28.48697406221693000 ) ) ; +#66019 = EDGE_LOOP ( 'NONE', ( #27363, #20934, #63463, #6289 ) ) ; +#66020 = ADVANCED_FACE ( 'NONE', ( #8600 ), #35871, .T. ) ; +#66021 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#66022 = AXIS2_PLACEMENT_3D ( 'NONE', #73421, #36164, #79666 ) ; +#66023 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34615, #71604, #65897, #28662 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951433624200E-007, 0.0007331043932795554500 ), + .UNSPECIFIED. ) ; +#66024 = CARTESIAN_POINT ( 'NONE', ( -15.60419106281628200, 9.917488320457973600, -28.69383698522098000 ) ) ; +#66025 = EDGE_CURVE ( 'NONE', #45383, #35366, #31492, .T. ) ; +#66026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66028 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155512300, 85.46616414991811400, -28.37247596307107900 ) ) ; +#66029 = FACE_OUTER_BOUND ( 'NONE', #38737, .T. ) ; +#66030 = CIRCLE ( 'NONE', #66254, 10.00000000000009200 ) ; +#66031 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66032 = ORIENTED_EDGE ( 'NONE', *, *, #25976, .F. ) ; +#66033 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274726500, 45.54999999999998300, -28.20555803802996700 ) ) ; +#66034 = CARTESIAN_POINT ( 'NONE', ( 16.57127784838979100, 70.12774695439638600, -28.53061079109404100 ) ) ; +#66035 = ORIENTED_EDGE ( 'NONE', *, *, #46496, .F. ) ; +#66036 = VERTEX_POINT ( 'NONE', #68841 ) ; +#66037 = ADVANCED_FACE ( 'NONE', ( #67012 ), #63114, .F. ) ; +#66038 = EDGE_CURVE ( 'NONE', #57892, #3009, #79653, .T. ) ; +#66039 = ORIENTED_EDGE ( 'NONE', *, *, #72748, .F. ) ; +#66040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55537, #18288, #24546, #68062 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283328354800, 0.0007287255810278888300 ), + .UNSPECIFIED. ) ; +#66041 = CARTESIAN_POINT ( 'NONE', ( 16.93414660039946500, 16.45713945854720700, -28.51850601323108600 ) ) ; +#66042 = AXIS2_PLACEMENT_3D ( 'NONE', #54101, #4332, #16861 ) ; +#66043 = AXIS2_PLACEMENT_3D ( 'NONE', #28917, #72410, #35155 ) ; +#66044 = ORIENTED_EDGE ( 'NONE', *, *, #44801, .F. ) ; +#66045 = VERTEX_POINT ( 'NONE', #37802 ) ; +#66046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66047 = EDGE_LOOP ( 'NONE', ( #16064, #51950, #5682, #12685 ) ) ; +#66048 = ORIENTED_EDGE ( 'NONE', *, *, #26541, .F. ) ; +#66049 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66050 = CARTESIAN_POINT ( 'NONE', ( -5.354186913874970700, 86.46717019299369200, -28.53914313452683200 ) ) ; +#66051 = ORIENTED_EDGE ( 'NONE', *, *, #48709, .T. ) ; +#66052 = CARTESIAN_POINT ( 'NONE', ( 9.254548258615010100, 28.59617684379258400, -28.64146614751468800 ) ) ; +#66053 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#66054 = ADVANCED_FACE ( 'NONE', ( #15421 ), #13495, .F. ) ; +#66055 = CIRCLE ( 'NONE', #20944, 9.500000000000099500 ) ; +#66056 = AXIS2_PLACEMENT_3D ( 'NONE', #47464, #60048, #22760 ) ; +#66057 = VERTEX_POINT ( 'NONE', #69106 ) ; +#66059 = ORIENTED_EDGE ( 'NONE', *, *, #6779, .T. ) ; +#66058 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66060 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#66061 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 2.166666666666683400, -12.20555803803000000 ) ) ; +#66062 = VERTEX_POINT ( 'NONE', #75360 ) ; +#66063 = EDGE_LOOP ( 'NONE', ( #58465, #71846, #51848, #76889 ) ) ; +#66064 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#66065 = FACE_OUTER_BOUND ( 'NONE', #77278, .T. ) ; +#66066 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 36.50000000000001400, 2.454695999814380200 ) ) ; +#66067 = AXIS2_PLACEMENT_3D ( 'NONE', #35553, #17044, #79063 ) ; +#66068 = CARTESIAN_POINT ( 'NONE', ( 2.279233496941939200, 60.09951448976264000, -28.63282631410030300 ) ) ; +#66069 = ORIENTED_EDGE ( 'NONE', *, *, #3733, .T. ) ; +#66070 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31943, #1180, #19977, #63502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0007606633682806791400 ), + .UNSPECIFIED. ) ; +#66071 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566305200, 14.04999999999987800, -28.70555803803009500 ) ) ; +#66072 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 1.500000000000004900, 4.650848422521012700 ) ) ; +#66073 = EDGE_CURVE ( 'NONE', #68074, #28848, #17020, .T. ) ; +#66074 = CONICAL_SURFACE ( 'NONE', #48369, 10.00000000000009200, 0.7853981633974447300 ) ; +#66075 = ORIENTED_EDGE ( 'NONE', *, *, #75664, .F. ) ; +#66076 = CARTESIAN_POINT ( 'NONE', ( 7.846510414712837700, 44.44999999999972600, -6.371867642992550700 ) ) ; +#66077 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66078 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 38.83333333333335000, -4.152999154772353500 ) ) ; +#66079 = ORIENTED_EDGE ( 'NONE', *, *, #10337, .T. ) ; +#66080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66081 = ORIENTED_EDGE ( 'NONE', *, *, #79304, .F. ) ; +#66082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66083 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846541200, 29.49920551340398900, -28.70555803802994200 ) ) ; +#66084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66086 = CARTESIAN_POINT ( 'NONE', ( 18.01268492844081900, 60.30637265398667800, -28.24165217761328300 ) ) ; +#66087 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 80.79999999999998300, -28.45034744217088700 ) ) ; +#66088 = EDGE_CURVE ( 'NONE', #4075, #27463, #2517, .T. ) ; +#66089 = CIRCLE ( 'NONE', #3540, 10.00000000000009200 ) ; +#66090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66091 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66092 = CONICAL_SURFACE ( 'NONE', #32753, 10.50000000000009600, 0.7853981633974500600 ) ; +#66093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66094 = EDGE_CURVE ( 'NONE', #56250, #24570, #68869, .T. ) ; +#66095 = ORIENTED_EDGE ( 'NONE', *, *, #66703, .F. ) ; +#66096 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#66098 = VERTEX_POINT ( 'NONE', #69362 ) ; +#66097 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701865300, 65.79999999999998300, -28.70555803802997700 ) ) ; +#66099 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 81.01872124563918500, -28.53757464917570600 ) ) ; +#66100 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116542600, 41.39435118792228300, -28.41114655922291700 ) ) ; +#66101 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66102 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 90.69949493661175700, -28.70555803802997700 ) ) ; +#66103 = EDGE_CURVE ( 'NONE', #39956, #63100, #46515, .T. ) ; +#66104 = CARTESIAN_POINT ( 'NONE', ( 7.476294866274343100, 22.66464174796073300, -28.53896444442198500 ) ) ; +#66105 = ADVANCED_FACE ( 'NONE', ( #65086 ), #44541, .F. ) ; +#66106 = CIRCLE ( 'NONE', #44577, 9.500000000000099500 ) ; +#66107 = CARTESIAN_POINT ( 'NONE', ( 15.85864231129049500, 24.55000000000000100, -28.50266868976635900 ) ) ; +#66108 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305561200, 51.89604671418325700, -28.70555803802999500 ) ) ; +#66110 = ORIENTED_EDGE ( 'NONE', *, *, #72885, .T. ) ; +#66109 = EDGE_CURVE ( 'NONE', #69152, #22950, #61181, .T. ) ; +#66111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66112 = CONICAL_SURFACE ( 'NONE', #29248, 10.50000000000009600, 0.7853981633974500600 ) ; +#66113 = EDGE_LOOP ( 'NONE', ( #28384, #55047, #18487 ) ) ; +#66114 = AXIS2_PLACEMENT_3D ( 'NONE', #73250, #54729, #17493 ) ; +#66115 = ORIENTED_EDGE ( 'NONE', *, *, #9338, .F. ) ; +#66116 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 42.33333333333334300, -5.205558038030008400 ) ) ; +#66117 = ORIENTED_EDGE ( 'NONE', *, *, #12983, .F. ) ; +#66118 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823696000, 17.19543746431594000, -28.61277292027076400 ) ) ; +#66119 = CONICAL_SURFACE ( 'NONE', #55360, 10.50000000000009600, 0.7853981633974500600 ) ; +#66120 = ORIENTED_EDGE ( 'NONE', *, *, #51382, .F. ) ; +#66122 = ORIENTED_EDGE ( 'NONE', *, *, #19560, .T. ) ; +#66121 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 74.37738371066726000, -28.70555803802997700 ) ) ; +#66123 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52035, #27350, #46053, #8791 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775791148800, 0.0009605145132139141700 ), + .UNSPECIFIED. ) ; +#66124 = ORIENTED_EDGE ( 'NONE', *, *, #69312, .F. ) ; +#66125 = ORIENTED_EDGE ( 'NONE', *, *, #61468, .T. ) ; +#66126 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449000, 76.12096679557699000, -28.36604143581847700 ) ) ; +#66127 = ADVANCED_FACE ( 'NONE', ( #77695 ), #75735, .T. ) ; +#66128 = ORIENTED_EDGE ( 'NONE', *, *, #25363, .F. ) ; +#66129 = AXIS2_PLACEMENT_3D ( 'NONE', #36848, #80398, #43109 ) ; +#66130 = CARTESIAN_POINT ( 'NONE', ( 0.5398464241017434400, 57.14999999999999100, 7.347764838769589500 ) ) ; +#66131 = EDGE_CURVE ( 'NONE', #69461, #27440, #54402, .T. ) ; +#66132 = EDGE_CURVE ( 'NONE', #62131, #43346, #39943, .T. ) ; +#66133 = AXIS2_PLACEMENT_3D ( 'NONE', #22380, #65918, #28685 ) ; +#66134 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#66135 = EDGE_LOOP ( 'NONE', ( #63759, #14261, #1385, #21107 ) ) ; +#66136 = CIRCLE ( 'NONE', #4711, 10.00000000000009400 ) ; +#66137 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 56.66666666666667900, 5.722645192245505700 ) ) ; +#66138 = ORIENTED_EDGE ( 'NONE', *, *, #766, .T. ) ; +#66139 = EDGE_LOOP ( 'NONE', ( #21978, #26411, #43516 ) ) ; +#66140 = ADVANCED_FACE ( 'NONE', ( #28092 ), #42637, .T. ) ; +#66141 = ORIENTED_EDGE ( 'NONE', *, *, #69520, .F. ) ; +#66142 = ORIENTED_EDGE ( 'NONE', *, *, #8401, .F. ) ; +#66143 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 90.34267608797600200, -28.20555803802997700 ) ) ; +#66144 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#66145 = ADVANCED_FACE ( 'NONE', ( #31973 ), #9553, .T. ) ; +#66146 = LINE ( 'NONE', #24565, #18437 ) ; +#66147 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 61.43945992495532900, -28.34042301926881200 ) ) ; +#66148 = EDGE_CURVE ( 'NONE', #67964, #40000, #25502, .T. ) ; +#66149 = AXIS2_PLACEMENT_3D ( 'NONE', #15252, #46216, #52474 ) ; +#66150 = AXIS2_PLACEMENT_3D ( 'NONE', #50118, #74922, #62681 ) ; +#66151 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66152 = ORIENTED_EDGE ( 'NONE', *, *, #22505, .T. ) ; +#66153 = ADVANCED_FACE ( 'NONE', ( #797 ), #57251, .T. ) ; +#66154 = CIRCLE ( 'NONE', #13971, 9.500000000000097700 ) ; +#66156 = EDGE_LOOP ( 'NONE', ( #9577, #48444, #56035 ) ) ; +#66155 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734543200, 70.27440177985820900, -28.29986836858018200 ) ) ; +#66157 = ORIENTED_EDGE ( 'NONE', *, *, #19858, .F. ) ; +#66158 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 10.83333333333335000, -6.205558038030004800 ) ) ; +#66159 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66160 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55909, #49634, #68442, #31198 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006649316450227305500, 0.0009605139212322995100 ), + .UNSPECIFIED. ) ; +#66161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66162 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 51.00000000000000700, -9.205558038030005700 ) ) ; +#66163 = AXIS2_PLACEMENT_3D ( 'NONE', #24792, #6028, #55244 ) ; +#66164 = CARTESIAN_POINT ( 'NONE', ( 2.785741443456273700, 51.52472935029921100, -28.39317435246098500 ) ) ; +#66165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66166 = FACE_OUTER_BOUND ( 'NONE', #70848, .T. ) ; +#66167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74466, #37158, #43422, #6185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.984041393316990300E-016, 0.001179148174663402300 ), + .UNSPECIFIED. ) ; +#66168 = CARTESIAN_POINT ( 'NONE', ( -1.786765180256111300E-013, 74.37738371066707500, -28.70555803802997700 ) ) ; +#66169 = CONICAL_SURFACE ( 'NONE', #8188, 10.00000000000009200, 0.7853981633974447300 ) ; +#66170 = VERTEX_POINT ( 'NONE', #26950 ) ; +#66171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47084, #40861, #3585, #9862 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697130752600E-007, 0.0008724363063899009500 ), + .UNSPECIFIED. ) ; +#66174 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 70.90033558196107300, -28.70555803802997700 ) ) ; +#66175 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66176 = AXIS2_PLACEMENT_3D ( 'NONE', #7985, #51484, #14271 ) ; +#66177 = EDGE_LOOP ( 'NONE', ( #14264, #76857, #52796, #11149 ) ) ; +#66178 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#66179 = EDGE_CURVE ( 'NONE', #23758, #26714, #11037, .T. ) ; +#66180 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38620, #13919, #32665, #76174 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345709800, 0.0008131256040082206600 ), + .UNSPECIFIED. ) ; +#66181 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187880100, 17.99813478817165100, -28.24089224568486500 ) ) ; +#66182 = CIRCLE ( 'NONE', #28481, 10.00000000000009200 ) ; +#66184 = ORIENTED_EDGE ( 'NONE', *, *, #21998, .T. ) ; +#66183 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686890200, 70.01994747561565200, -28.24986299608890400 ) ) ; +#66185 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462801900, 51.25732391202399200, -28.20555803802997700 ) ) ; +#66186 = CIRCLE ( 'NONE', #37977, 10.00000000000009400 ) ; +#66187 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#66188 = ORIENTED_EDGE ( 'NONE', *, *, #68326, .T. ) ; +#66189 = AXIS2_PLACEMENT_3D ( 'NONE', #14722, #58236, #21003 ) ; +#66190 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051555000, 61.01872124563913500, -28.53757464917582400 ) ) ; +#66191 = CIRCLE ( 'NONE', #8409, 10.00000000000009600 ) ; +#66192 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#66193 = ORIENTED_EDGE ( 'NONE', *, *, #12035, .F. ) ; +#66194 = ORIENTED_EDGE ( 'NONE', *, *, #16873, .F. ) ; +#66195 = ORIENTED_EDGE ( 'NONE', *, *, #45901, .F. ) ; +#66196 = VERTEX_POINT ( 'NONE', #14419 ) ; +#66197 = ORIENTED_EDGE ( 'NONE', *, *, #71517, .F. ) ; +#66198 = ORIENTED_EDGE ( 'NONE', *, *, #29802, .F. ) ; +#66199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66200 = CARTESIAN_POINT ( 'NONE', ( 10.07349692871609800, 51.37839075872564400, -28.29547734244359300 ) ) ; +#66201 = CARTESIAN_POINT ( 'NONE', ( -15.46693852783917000, 75.79999999999999700, -28.37297418064014200 ) ) ; +#66202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66203 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 60.89350487330098400, -28.45034744217088700 ) ) ; +#66204 = ORIENTED_EDGE ( 'NONE', *, *, #36860, .F. ) ; +#66205 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#66206 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725289700, 24.55000000000000100, -28.20555803802994200 ) ) ; +#66207 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#66208 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66209 = CONICAL_SURFACE ( 'NONE', #65162, 10.00000000000009200, 0.7853981633974447300 ) ; +#66210 = ORIENTED_EDGE ( 'NONE', *, *, #15708, .T. ) ; +#66212 = EDGE_CURVE ( 'NONE', #4291, #52713, #77339, .T. ) ; +#66211 = ORIENTED_EDGE ( 'NONE', *, *, #19627, .T. ) ; +#66213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66214 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 90.34267608797603100, -28.20555803802997700 ) ) ; +#66215 = ORIENTED_EDGE ( 'NONE', *, *, #37690, .T. ) ; +#66216 = ORIENTED_EDGE ( 'NONE', *, *, #48308, .T. ) ; +#66217 = EDGE_CURVE ( 'NONE', #42204, #70191, #62906, .T. ) ; +#66218 = EDGE_LOOP ( 'NONE', ( #9422, #45218, #12124, #26391 ) ) ; +#66219 = VERTEX_POINT ( 'NONE', #8405 ) ; +#66220 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35605, #72865, #48066, #10846 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405671484908600E-007, 0.0007670610367941789000 ), + .UNSPECIFIED. ) ; +#66221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66222 = FACE_OUTER_BOUND ( 'NONE', #74018, .T. ) ; +#66223 = CARTESIAN_POINT ( 'NONE', ( 1.899882735204321900, 35.05000000000000400, -28.53808257741932800 ) ) ; +#66224 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#66225 = EDGE_LOOP ( 'NONE', ( #62111, #9260, #76245 ) ) ; +#66226 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510344300, 18.15930907398619700, -28.35186440610855400 ) ) ; +#66227 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76055, #63585, #32286, #38773 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800051100 ), + .UNSPECIFIED. ) ; +#66228 = EDGE_CURVE ( 'NONE', #62206, #42191, #26131, .T. ) ; +#66229 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.62753447840813700, -28.38801640354867200 ) ) ; +#66230 = ORIENTED_EDGE ( 'NONE', *, *, #24057, .T. ) ; +#66231 = EDGE_CURVE ( 'NONE', #67038, #65360, #48390, .T. ) ; +#66232 = AXIS2_PLACEMENT_3D ( 'NONE', #1774, #70051, #51528 ) ; +#66233 = CONICAL_SURFACE ( 'NONE', #18612, 10.50000000000009400, 0.7853981633974500600 ) ; +#66234 = VERTEX_POINT ( 'NONE', #45930 ) ; +#66235 = ORIENTED_EDGE ( 'NONE', *, *, #13898, .F. ) ; +#66236 = ORIENTED_EDGE ( 'NONE', *, *, #76079, .T. ) ; +#66237 = ADVANCED_FACE ( 'NONE', ( #59197 ), #7581, .F. ) ; +#66238 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 57.00000000000000700, -1.205558038030005300 ) ) ; +#66239 = AXIS2_PLACEMENT_3D ( 'NONE', #59762, #16242, #78541 ) ; +#66240 = EDGE_CURVE ( 'NONE', #368, #55672, #24176, .T. ) ; +#66241 = EDGE_CURVE ( 'NONE', #16848, #39894, #33961, .T. ) ; +#66242 = EDGE_CURVE ( 'NONE', #51665, #13694, #11537, .T. ) ; +#66243 = PLANE ( 'NONE', #13810 ) ; +#66244 = ADVANCED_FACE ( 'NONE', ( #40685 ), #22213, .T. ) ; +#66245 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999999100, 87.22261628933272000, -28.70555803802997700 ) ) ; +#66246 = CONICAL_SURFACE ( 'NONE', #41670, 10.00000000000009200, 0.7853981633974447300 ) ; +#66247 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66248 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 51.16666666666667100, 0.9380355014189848400 ) ) ; +#66249 = ORIENTED_EDGE ( 'NONE', *, *, #10103, .F. ) ; +#66250 = ORIENTED_EDGE ( 'NONE', *, *, #45094, .T. ) ; +#66251 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670956500, 27.94136558227939600, -28.48677465922826700 ) ) ; +#66252 = EDGE_CURVE ( 'NONE', #59182, #38445, #19503, .T. ) ; +#66253 = AXIS2_PLACEMENT_3D ( 'NONE', #63659, #26402, #69876 ) ; +#66254 = AXIS2_PLACEMENT_3D ( 'NONE', #9793, #53293, #16039 ) ; +#66255 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857176300, 12.17681279774499700, -28.70555803802994200 ) ) ; +#66256 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719597100, 36.94142842854297700, -28.37229765499277100 ) ) ; +#66257 = ADVANCED_FACE ( 'NONE', ( #33913 ), #30057, .T. ) ; +#66258 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66259 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 28.33333333333334600, 4.294441961970000500 ) ) ; +#66260 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966700, 9.940690926013795400, -28.35186440610855000 ) ) ; +#66261 = CONICAL_SURFACE ( 'NONE', #59678, 10.00000000000009400, 0.7853981633974447300 ) ; +#66262 = ORIENTED_EDGE ( 'NONE', *, *, #78432, .T. ) ; +#66263 = ORIENTED_EDGE ( 'NONE', *, *, #66088, .T. ) ; +#66264 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 65.79999999999998300, -28.20555803802997700 ) ) ; +#66265 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66266 = CARTESIAN_POINT ( 'NONE', ( -3.277422164555628700, 79.72166103827314000, -28.53892303408242300 ) ) ; +#66268 = ORIENTED_EDGE ( 'NONE', *, *, #55719, .T. ) ; +#66267 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37740, #31528, #50241, #13034 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421248988800, 0.0008027336008646278300 ), + .UNSPECIFIED. ) ; +#66269 = FACE_OUTER_BOUND ( 'NONE', #717, .T. ) ; +#66270 = ORIENTED_EDGE ( 'NONE', *, *, #24039, .F. ) ; +#66271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66272 = VERTEX_POINT ( 'NONE', #9489 ) ; +#66273 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002100, 29.03085164125335300, -28.45573375118225800 ) ) ; +#66274 = ORIENTED_EDGE ( 'NONE', *, *, #79312, .F. ) ; +#66275 = PLANE ( 'NONE', #3554 ) ; +#66276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66277 = VERTEX_POINT ( 'NONE', #53003 ) ; +#66278 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655698900, 28.42298334620753800, -28.20555803802994500 ) ) ; +#66279 = CARTESIAN_POINT ( 'NONE', ( 15.02626848327762800, 85.71754128061461100, -28.70555803803001600 ) ) ; +#66280 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64063, #57785, #76531, #39264 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854439300, 0.0007596411030281087500 ), + .UNSPECIFIED. ) ; +#66281 = AXIS2_PLACEMENT_3D ( 'NONE', #47081, #53373, #78129 ) ; +#66282 = ORIENTED_EDGE ( 'NONE', *, *, #16450, .T. ) ; +#66283 = CIRCLE ( 'NONE', #69775, 10.50000000000009800 ) ; +#66284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66285 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 62.83333333333335000, -6.205558038030004800 ) ) ; +#66286 = ORIENTED_EDGE ( 'NONE', *, *, #2835, .T. ) ; +#66287 = ORIENTED_EDGE ( 'NONE', *, *, #15791, .F. ) ; +#66288 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 39.13131911501876200, -28.51286550264508800 ) ) ; +#66289 = ORIENTED_EDGE ( 'NONE', *, *, #69290, .T. ) ; +#66290 = VERTEX_POINT ( 'NONE', #46736 ) ; +#66291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66292 = CONICAL_SURFACE ( 'NONE', #38343, 10.00000000000009200, 0.7853981633974447300 ) ; +#66293 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#66294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66295 = AXIS2_PLACEMENT_3D ( 'NONE', #19919, #44597, #75652 ) ; +#66296 = ORIENTED_EDGE ( 'NONE', *, *, #65868, .T. ) ; +#66297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50549, #38048, #19586, #63109 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276978047900E-007, 0.0007677744771234624100 ), + .UNSPECIFIED. ) ; +#66298 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66299 = ORIENTED_EDGE ( 'NONE', *, *, #49846, .F. ) ; +#66300 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66301 = CARTESIAN_POINT ( 'NONE', ( 1.116254736416767600, 45.54999999999998300, -28.53994725305376400 ) ) ; +#66302 = AXIS2_PLACEMENT_3D ( 'NONE', #70563, #33296, #76816 ) ; +#66303 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#66304 = CIRCLE ( 'NONE', #53984, 10.50000000000009600 ) ; +#66305 = EDGE_LOOP ( 'NONE', ( #42042, #37004, #7448 ) ) ; +#66306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66308 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.16749699759768800, -28.20555803802997700 ) ) ; +#66309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66310 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362704300, 67.56528145730244700, -28.66119098264627100 ) ) ; +#66311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80586, #24838, #43561, #6331 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241261300, 0.0005195704752302474200 ), + .UNSPECIFIED. ) ; +#66312 = ADVANCED_FACE ( 'NONE', ( #55287 ), #59273, .T. ) ; +#66313 = EDGE_CURVE ( 'NONE', #18771, #63070, #5657, .T. ) ; +#66314 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66315 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 2.081668171172168200E-014, 9.794441961969996100 ) ) ; +#66316 = EDGE_CURVE ( 'NONE', #29676, #19770, #5025, .T. ) ; +#66317 = ORIENTED_EDGE ( 'NONE', *, *, #21179, .T. ) ; +#66318 = VERTEX_POINT ( 'NONE', #22028 ) ; +#66319 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769050100, 39.78860447109613600, -28.53900456328626900 ) ) ; +#66320 = ORIENTED_EDGE ( 'NONE', *, *, #38744, .F. ) ; +#66321 = ADVANCED_FACE ( 'NONE', ( #69881 ), #67948, .F. ) ; +#66322 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 34.33333333333334300, -5.535685056952199400 ) ) ; +#66323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66324 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428600900, 60.07141756547895300, -28.70555803802997700 ) ) ; +#66325 = EDGE_CURVE ( 'NONE', #45068, #30415, #71358, .T. ) ; +#66326 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#66327 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, -0.6666666666666626300, -8.133761268305512700 ) ) ; +#66328 = EDGE_CURVE ( 'NONE', #1543, #47484, #56900, .T. ) ; +#66329 = CIRCLE ( 'NONE', #72666, 9.500000000000099500 ) ; +#66330 = ORIENTED_EDGE ( 'NONE', *, *, #53615, .T. ) ; +#66331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66332 = ORIENTED_EDGE ( 'NONE', *, *, #14235, .F. ) ; +#66333 = EDGE_CURVE ( 'NONE', #33380, #65603, #42410, .T. ) ; +#66334 = CARTESIAN_POINT ( 'NONE', ( 0.2777875663083738100, 44.44999999999998900, -10.71226769091009600 ) ) ; +#66335 = CARTESIAN_POINT ( 'NONE', ( 10.95972934556082900, 49.72438272935919900, -28.30310183417010000 ) ) ; +#66336 = FACE_OUTER_BOUND ( 'NONE', #67608, .T. ) ; +#66337 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 36.66666666666665700, 4.294441961969993400 ) ) ; +#66338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66339 = EDGE_LOOP ( 'NONE', ( #13321, #1438, #53936, #1758 ) ) ; +#66340 = ORIENTED_EDGE ( 'NONE', *, *, #70349, .T. ) ; +#66341 = ORIENTED_EDGE ( 'NONE', *, *, #77272, .F. ) ; +#66342 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349244500, 30.39456479767167000, -28.70555803802995200 ) ) ; +#66343 = ORIENTED_EDGE ( 'NONE', *, *, #51130, .F. ) ; +#66344 = ORIENTED_EDGE ( 'NONE', *, *, #28482, .F. ) ; +#66345 = ORIENTED_EDGE ( 'NONE', *, *, #21662, .T. ) ; +#66346 = CIRCLE ( 'NONE', #14539, 10.50000000000009600 ) ; +#66347 = EDGE_CURVE ( 'NONE', #79429, #40503, #28015, .T. ) ; +#66348 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428598300, 49.57141756547894600, -28.70555803802996700 ) ) ; +#66349 = EDGE_CURVE ( 'NONE', #2993, #20905, #13535, .T. ) ; +#66350 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57309, #20062, #76059, #38775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611718729667200E-007, 0.0002592600401777324300 ), + .UNSPECIFIED. ) ; +#66351 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 89.97246552159111800, -28.38801640354855100 ) ) ; +#66352 = EDGE_CURVE ( 'NONE', #80133, #15321, #53344, .T. ) ; +#66353 = ADVANCED_FACE ( 'NONE', ( #20262 ), #4322, .T. ) ; +#66354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66356 = FACE_OUTER_BOUND ( 'NONE', #39315, .T. ) ; +#66357 = AXIS2_PLACEMENT_3D ( 'NONE', #74235, #36932, #80472 ) ; +#66358 = VERTEX_POINT ( 'NONE', #47806 ) ; +#66359 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#66360 = EDGE_LOOP ( 'NONE', ( #26397, #3976, #67926, #79156 ) ) ; +#66361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66362 = ORIENTED_EDGE ( 'NONE', *, *, #30729, .T. ) ; +#66363 = EDGE_LOOP ( 'NONE', ( #61762, #5825, #36877 ) ) ; +#66364 = CARTESIAN_POINT ( 'NONE', ( -17.02315967650648800, 31.01912043132467600, -28.30223257055580900 ) ) ; +#66365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66366 = VERTEX_POINT ( 'NONE', #72872 ) ; +#66367 = CARTESIAN_POINT ( 'NONE', ( 17.38231690878855300, 10.20496220355537400, -28.41840204704136500 ) ) ; +#66368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66369 = CIRCLE ( 'NONE', #63899, 10.50000000000009600 ) ; +#66370 = AXIS2_PLACEMENT_3D ( 'NONE', #15119, #65201, #71414 ) ; +#66371 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#66372 = AXIS2_PLACEMENT_3D ( 'NONE', #79437, #29692, #35916 ) ; +#66373 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428598300, 31.02858243452103400, -28.70555803802996700 ) ) ; +#66374 = ORIENTED_EDGE ( 'NONE', *, *, #40206, .F. ) ; +#66375 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950496600, 38.69228657120673600, -28.53891855579988100 ) ) ; +#66376 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#66377 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11475, #79727, #17723, #61258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258831556100, 0.0009376791149929650900 ), + .UNSPECIFIED. ) ; +#66378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66379 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 40.16666666666668600, 0.9380355014189834000 ) ) ; +#66380 = CARTESIAN_POINT ( 'NONE', ( -4.036255108181025600, 89.94924284854707300, -28.20555803802997700 ) ) ; +#66381 = FACE_OUTER_BOUND ( 'NONE', #66139, .T. ) ; +#66382 = ORIENTED_EDGE ( 'NONE', *, *, #7559, .F. ) ; +#66383 = ORIENTED_EDGE ( 'NONE', *, *, #66240, .T. ) ; +#66384 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66385 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217498700, 80.16054007504416700, -28.34042301926922400 ) ) ; +#66386 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#66387 = AXIS2_PLACEMENT_3D ( 'NONE', #35319, #78826, #41533 ) ; +#66388 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66390 = CARTESIAN_POINT ( 'NONE', ( -5.350438627544588300, 57.15000000000004800, 6.241012207402057800 ) ) ; +#66391 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22578, #66108, #47552, #10336 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.130325535722081200E-016, 0.001492013864176163300 ), + .UNSPECIFIED. ) ; +#66392 = CARTESIAN_POINT ( 'NONE', ( 10.64286593949239700, 21.02620220503713400, -28.70555803802994200 ) ) ; +#66393 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660979200, 60.13716795162655200, -28.48697406221649300 ) ) ; +#66394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66395 = EDGE_CURVE ( 'NONE', #49674, #28171, #36787, .T. ) ; +#66396 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#66397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10959, #23455, #42181, #4942 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621188400 ), + .UNSPECIFIED. ) ; +#66398 = ORIENTED_EDGE ( 'NONE', *, *, #5715, .T. ) ; +#66399 = CARTESIAN_POINT ( 'NONE', ( -20.16156744948534700, 7.419226061524777400, -27.27058983740903700 ) ) ; +#66400 = AXIS2_PLACEMENT_3D ( 'NONE', #70029, #2023, #26810 ) ; +#66401 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66402 = VERTEX_POINT ( 'NONE', #35617 ) ; +#66403 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 86.76150692817282100, -28.68631150211663100 ) ) ; +#66404 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339055500, 81.46283204837337200, -28.48697406221665300 ) ) ; +#66405 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56232, #12757, #49946, #18976 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.401466049376327500E-007, 0.0002929914227444367200 ), + .UNSPECIFIED. ) ; +#66406 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970300, 63.65857157145682500, -28.20555803803047800 ) ) ; +#66407 = ADVANCED_FACE ( 'NONE', ( #3693 ), #66010, .T. ) ; +#66408 = FACE_OUTER_BOUND ( 'NONE', #3978, .T. ) ; +#66409 = ORIENTED_EDGE ( 'NONE', *, *, #76435, .F. ) ; +#66410 = FACE_OUTER_BOUND ( 'NONE', #61694, .T. ) ; +#66411 = AXIS2_PLACEMENT_3D ( 'NONE', #28335, #71816, #34554 ) ; +#66412 = ORIENTED_EDGE ( 'NONE', *, *, #972, .F. ) ; +#66413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66414 = ORIENTED_EDGE ( 'NONE', *, *, #56545, .F. ) ; +#66415 = CIRCLE ( 'NONE', #36429, 10.00000000000009200 ) ; +#66416 = EDGE_LOOP ( 'NONE', ( #15033, #38103, #67745 ) ) ; +#66417 = EDGE_LOOP ( 'NONE', ( #8867, #13500, #58248, #12084 ) ) ; +#66418 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462801900, 51.25732391202399200, -28.20555803802997700 ) ) ; +#66419 = ORIENTED_EDGE ( 'NONE', *, *, #27541, .T. ) ; +#66420 = ADVANCED_FACE ( 'NONE', ( #38717 ), #32887, .T. ) ; +#66422 = ORIENTED_EDGE ( 'NONE', *, *, #29012, .F. ) ; +#66421 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 8.666666666666682100, 3.124568980892192800 ) ) ; +#66423 = CIRCLE ( 'NONE', #40029, 10.00000000000009400 ) ; +#66424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66425 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 48.83333333333331400, 6.794441961969992500 ) ) ; +#66426 = VERTEX_POINT ( 'NONE', #79400 ) ; +#66427 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492444600, 50.20543520232830300, -28.70555803802996700 ) ) ; +#66428 = FACE_OUTER_BOUND ( 'NONE', #4296, .T. ) ; +#66429 = EDGE_CURVE ( 'NONE', #26055, #54480, #79835, .T. ) ; +#66430 = ORIENTED_EDGE ( 'NONE', *, *, #15076, .T. ) ; +#66431 = ADVANCED_FACE ( 'NONE', ( #73813 ), #80591, .T. ) ; +#66432 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830840100, 69.95045548864068500, -28.33400579219046000 ) ) ; +#66433 = ORIENTED_EDGE ( 'NONE', *, *, #22728, .F. ) ; +#66434 = ORIENTED_EDGE ( 'NONE', *, *, #62497, .T. ) ; +#66435 = VERTEX_POINT ( 'NONE', #73410 ) ; +#66436 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#66437 = CONICAL_SURFACE ( 'NONE', #23641, 10.00000000000009400, 0.7853981633974447300 ) ; +#66438 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66439 = ORIENTED_EDGE ( 'NONE', *, *, #24058, .F. ) ; +#66440 = CIRCLE ( 'NONE', #72716, 9.500000000000095900 ) ; +#66441 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#66442 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7524, #44762, #20082, #63599 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925476221555972100E-007, 0.0002670039411972709800 ), + .UNSPECIFIED. ) ; +#66443 = ADVANCED_FACE ( 'NONE', ( #49408 ), #47451, .T. ) ; +#66444 = ORIENTED_EDGE ( 'NONE', *, *, #69772, .T. ) ; +#66445 = CARTESIAN_POINT ( 'NONE', ( -14.59460194654701900, 50.55000000000001100, -28.44758689493329500 ) ) ; +#66446 = VERTEX_POINT ( 'NONE', #5120 ) ; +#66447 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260080000, 51.39965687931105300, -28.70555803803001300 ) ) ; +#66448 = EDGE_CURVE ( 'NONE', #49502, #4660, #34867, .T. ) ; +#66449 = EDGE_CURVE ( 'NONE', #65515, #66318, #65403, .T. ) ; +#66450 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66451 = CARTESIAN_POINT ( 'NONE', ( 3.064555739224957200, 71.50962196508507400, -28.29483400905885300 ) ) ; +#66452 = CIRCLE ( 'NONE', #42424, 9.500000000000095900 ) ; +#66453 = VERTEX_POINT ( 'NONE', #17654 ) ; +#66454 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#66455 = CARTESIAN_POINT ( 'NONE', ( -17.91666047136823500, 41.67041185698241200, -28.27321389036147200 ) ) ; +#66456 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500020600, 71.76337688193829900, -28.37223523914911300 ) ) ; +#66457 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#66458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66459 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66460 = AXIS2_PLACEMENT_3D ( 'NONE', #25512, #69009, #31755 ) ; +#66461 = EDGE_CURVE ( 'NONE', #16201, #2995, #16373, .T. ) ; +#66462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66463 = EDGE_CURVE ( 'NONE', #44743, #38547, #64069, .T. ) ; +#66464 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66465 = EDGE_CURVE ( 'NONE', #39289, #62861, #1741, .T. ) ; +#66466 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372568800, 67.93535825203923700, -28.53896444442199300 ) ) ; +#66467 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 61.82440674572816200, -28.45987523529581900 ) ) ; +#66468 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826527200, 28.45051138331398400, -28.33414295261581000 ) ) ; +#66469 = AXIS2_PLACEMENT_3D ( 'NONE', #22370, #66172, #28946 ) ; +#66470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66471 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66472 = CARTESIAN_POINT ( 'NONE', ( 17.03177803894799100, 90.28233213024611800, -28.25051428653880600 ) ) ; +#66473 = ORIENTED_EDGE ( 'NONE', *, *, #78645, .F. ) ; +#66474 = ORIENTED_EDGE ( 'NONE', *, *, #41883, .F. ) ; +#66475 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404300, 28.42298334620739900, -28.20555803802994500 ) ) ; +#66476 = AXIS2_PLACEMENT_3D ( 'NONE', #24778, #43252, #37001 ) ; +#66477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66478 = AXIS2_PLACEMENT_3D ( 'NONE', #41794, #4548, #48030 ) ; +#66479 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009100, 15.94142842854307000, -28.20555803802992800 ) ) ; +#66480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47025, #72108, #10067, #53580, #16332, #59855 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082191300, 0.004114855318164382600 ), + .UNSPECIFIED. ) ; +#66481 = CARTESIAN_POINT ( 'NONE', ( -4.766907343688772300, 85.80000000000262600, -28.70555803802997700 ) ) ; +#66482 = AXIS2_PLACEMENT_3D ( 'NONE', #54387, #79425, #23396 ) ; +#66483 = FACE_OUTER_BOUND ( 'NONE', #24900, .T. ) ; +#66484 = ORIENTED_EDGE ( 'NONE', *, *, #22478, .F. ) ; +#66485 = CIRCLE ( 'NONE', #10741, 10.00000000000009400 ) ; +#66486 = ORIENTED_EDGE ( 'NONE', *, *, #17853, .T. ) ; +#66487 = CIRCLE ( 'NONE', #133, 9.500000000000097700 ) ; +#66488 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10972, #54467, #29758, #73247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.747537447052285900E-007, 0.0002745498510224791700 ), + .UNSPECIFIED. ) ; +#66489 = VERTEX_POINT ( 'NONE', #42905 ) ; +#66490 = VERTEX_POINT ( 'NONE', #55421 ) ; +#66491 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 54.83333333333332100, -3.349151577478984600 ) ) ; +#66492 = EDGE_LOOP ( 'NONE', ( #32614, #35547, #12749, #55226 ) ) ; +#66493 = AXIS2_PLACEMENT_3D ( 'NONE', #33846, #58586, #52296 ) ; +#66494 = EDGE_CURVE ( 'NONE', #23333, #1001, #50871, .T. ) ; +#66495 = CONICAL_SURFACE ( 'NONE', #67082, 10.50000000000009600, 0.7853981633974482800 ) ; +#66496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66497 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 41.35277818615431800, -28.70555803802999500 ) ) ; +#66498 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725386900, 73.66464174796080000, -28.53896444442226300 ) ) ; +#66499 = ADVANCED_FACE ( 'NONE', ( #30966 ), #29057, .T. ) ; +#66500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#66501 = ORIENTED_EDGE ( 'NONE', *, *, #78628, .T. ) ; +#66502 = FACE_OUTER_BOUND ( 'NONE', #58280, .T. ) ; +#66503 = ORIENTED_EDGE ( 'NONE', *, *, #36982, .T. ) ; +#66504 = CARTESIAN_POINT ( 'NONE', ( -4.504763158465416400, 39.99920551340398600, -28.70555803802995200 ) ) ; +#66505 = EDGE_CURVE ( 'NONE', #68696, #52754, #36432, .T. ) ; +#66506 = ORIENTED_EDGE ( 'NONE', *, *, #69260, .F. ) ; +#66507 = AXIS2_PLACEMENT_3D ( 'NONE', #71293, #34040, #77555 ) ; +#66508 = ORIENTED_EDGE ( 'NONE', *, *, #34029, .T. ) ; +#66509 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#66510 = ORIENTED_EDGE ( 'NONE', *, *, #75634, .F. ) ; +#66511 = FACE_OUTER_BOUND ( 'NONE', #30247, .T. ) ; +#66512 = ADVANCED_FACE ( 'NONE', ( #51345 ), #76668, .F. ) ; +#66513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66515 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71362, #40333, #28150, #71637 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043633300, 0.007919184322923262000 ), + .UNSPECIFIED. ) ; +#66516 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 26.16666666666666800, -4.152999154772358800 ) ) ; +#66517 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#66518 = ORIENTED_EDGE ( 'NONE', *, *, #69982, .F. ) ; +#66519 = AXIS2_PLACEMENT_3D ( 'NONE', #43002, #18274, #61803 ) ; +#66520 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66521 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#66522 = ORIENTED_EDGE ( 'NONE', *, *, #57452, .F. ) ; +#66523 = ADVANCED_FACE ( 'NONE', ( #18311 ), #43567, .T. ) ; +#66524 = FACE_OUTER_BOUND ( 'NONE', #65266, .T. ) ; +#66525 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66526 = CARTESIAN_POINT ( 'NONE', ( -16.76918824634331500, 50.94994472024610800, -28.43636979168675400 ) ) ; +#66527 = CARTESIAN_POINT ( 'NONE', ( 3.221259145455861500, 18.16476764525094000, -28.30311733712054000 ) ) ; +#66528 = ADVANCED_FACE ( 'NONE', ( #12463 ), #10508, .T. ) ; +#66529 = AXIS2_PLACEMENT_3D ( 'NONE', #69622, #38321, #32368 ) ; +#66530 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52284, #46037, #33831, #77347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082201152900E-007, 0.001119323292485721600 ), + .UNSPECIFIED. ) ; +#66531 = ADVANCED_FACE ( 'NONE', ( #60165 ), #58181, .T. ) ; +#66532 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 30.56914835874665600, -28.45573375118225500 ) ) ; +#66533 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042360900, 17.00972971738973500, -28.70555803803003800 ) ) ; +#66534 = EDGE_CURVE ( 'NONE', #71797, #74733, #21989, .T. ) ; +#66535 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 60.66666666666667900, 3.124568980892192800 ) ) ; +#66536 = VECTOR ( 'NONE', #25865, 1000.000000000000000 ) ; +#66537 = CARTESIAN_POINT ( 'NONE', ( 19.97155789205646300, 0.05688421588670140900, -19.93543921666504200 ) ) ; +#66538 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801532000, 60.90033558196107300, -28.70555803802997700 ) ) ; +#66539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66540 = EDGE_LOOP ( 'NONE', ( #29402, #38731, #12866, #24280 ) ) ; +#66541 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803001300 ) ) ; +#66542 = CARTESIAN_POINT ( 'NONE', ( 16.63397925265175600, 50.62725315814181200, -28.57116050423394800 ) ) ; +#66543 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572400, 53.67681279774500100, -28.70555803802997700 ) ) ; +#66544 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66546 = ORIENTED_EDGE ( 'NONE', *, *, #77623, .T. ) ; +#66547 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#66548 = EDGE_LOOP ( 'NONE', ( #1998, #71183, #27043 ) ) ; +#66549 = CARTESIAN_POINT ( 'NONE', ( 10.63950292779719900, 20.43250300240229200, -28.25438406275897000 ) ) ; +#66550 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285712600, 63.67681279774500800, -28.70555803802997700 ) ) ; +#66551 = CONICAL_SURFACE ( 'NONE', #7327, 10.00000000000009200, 0.7853981633974447300 ) ; +#66552 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033100, 61.46283204837305200, -28.48697406221690900 ) ) ; +#66553 = EDGE_LOOP ( 'NONE', ( #13536, #13543, #41267 ) ) ; +#66554 = CONICAL_SURFACE ( 'NONE', #62810, 10.50000000000009600, 0.7853981633974518300 ) ; +#66555 = EDGE_CURVE ( 'NONE', #53788, #65306, #7498, .T. ) ; +#66556 = EDGE_LOOP ( 'NONE', ( #58034, #36363, #72230 ) ) ; +#66557 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576917600, 35.04999999999999700, -28.65220501466659500 ) ) ; +#66558 = VERTEX_POINT ( 'NONE', #31235 ) ; +#66559 = CIRCLE ( 'NONE', #49547, 10.50000000000009600 ) ; +#66560 = CARTESIAN_POINT ( 'NONE', ( 9.042760264135456100, 85.79999999999998300, -28.53819074160684400 ) ) ; +#66561 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28455, #34133, #78186, #40920 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.357984957514949900E-005, 0.001119324643799697200 ), + .UNSPECIFIED. ) ; +#66563 = ORIENTED_EDGE ( 'NONE', *, *, #18425, .T. ) ; +#66562 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217475800, 60.16054007504465100, -28.34042301926880800 ) ) ; +#66564 = EDGE_LOOP ( 'NONE', ( #4923, #9559, #24499, #420, #9918, #30344 ) ) ; +#66565 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#66566 = ORIENTED_EDGE ( 'NONE', *, *, #73887, .F. ) ; +#66567 = CARTESIAN_POINT ( 'NONE', ( 15.48501075492304000, 88.56055603621115300, -28.70555803803004500 ) ) ; +#66568 = AXIS2_PLACEMENT_3D ( 'NONE', #17567, #11311, #42276 ) ; +#66569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66570 = EDGE_CURVE ( 'NONE', #33855, #50545, #62110, .T. ) ; +#66571 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66573 = CONICAL_SURFACE ( 'NONE', #56563, 10.00000000000009400, 0.7853981633974447300 ) ; +#66574 = EDGE_CURVE ( 'NONE', #20598, #11, #73860, .T. ) ; +#66575 = VERTEX_POINT ( 'NONE', #25242 ) ; +#66576 = AXIS2_PLACEMENT_3D ( 'NONE', #48351, #11133, #54632 ) ; +#66577 = FACE_OUTER_BOUND ( 'NONE', #37357, .T. ) ; +#66578 = VERTEX_POINT ( 'NONE', #56490 ) ; +#66579 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66580 = PLANE ( 'NONE', #5717 ) ; +#66581 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 67.00000000000000000, -12.20555803803000200 ) ) ; +#66582 = VERTEX_POINT ( 'NONE', #19231 ) ; +#66583 = ORIENTED_EDGE ( 'NONE', *, *, #9100, .T. ) ; +#66584 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#66585 = ORIENTED_EDGE ( 'NONE', *, *, #45517, .T. ) ; +#66586 = CIRCLE ( 'NONE', #56980, 10.50000000000009600 ) ; +#66587 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 32.16666666666667900, 3.794441961969996900 ) ) ; +#66588 = AXIS2_PLACEMENT_3D ( 'NONE', #6454, #49937, #12745 ) ; +#66589 = AXIS2_PLACEMENT_3D ( 'NONE', #15535, #46486, #65344 ) ; +#66590 = ORIENTED_EDGE ( 'NONE', *, *, #57032, .T. ) ; +#66591 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66592 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344312700, 20.67701665379241400, -28.20555803802994200 ) ) ; +#66593 = EDGE_CURVE ( 'NONE', #63404, #44806, #59386, .T. ) ; +#66594 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 0.0000000000000000000, 13.79444196196997700 ) ) ; +#66595 = EDGE_CURVE ( 'NONE', #80344, #31625, #44866, .T. ) ; +#66596 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, -2.833333333333316600, 6.794441961969992500 ) ) ; +#66597 = ORIENTED_EDGE ( 'NONE', *, *, #71957, .F. ) ; +#66598 = AXIS2_PLACEMENT_3D ( 'NONE', #23323, #79362, #35835 ) ; +#66599 = ORIENTED_EDGE ( 'NONE', *, *, #14059, .T. ) ; +#66600 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#66601 = ORIENTED_EDGE ( 'NONE', *, *, #29970, .T. ) ; +#66602 = EDGE_LOOP ( 'NONE', ( #63712, #57408, #38819, #75988 ) ) ; +#66603 = CARTESIAN_POINT ( 'NONE', ( -7.376019861837178800, 44.45000000000040800, -6.975978748272826400 ) ) ; +#66604 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66605 = CIRCLE ( 'NONE', #68494, 9.500000000000095900 ) ; +#66606 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 34.50000000000000700, -9.258116921287651700 ) ) ; +#66607 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#66608 = CARTESIAN_POINT ( 'NONE', ( 16.96407964306386900, 18.00210619075091500, -28.25343951603387900 ) ) ; +#66609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66610 = EDGE_CURVE ( 'NONE', #32323, #65167, #14405, .T. ) ; +#66611 = AXIS2_PLACEMENT_3D ( 'NONE', #26279, #69754, #32496 ) ; +#66612 = AXIS2_PLACEMENT_3D ( 'NONE', #65545, #28297, #71782 ) ; +#66613 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66614 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390051800, 80.13716795162663700, -28.48697406221650000 ) ) ; +#66615 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27678, #34458, #46918, #9697 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004076700 ), + .UNSPECIFIED. ) ; +#66616 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950485500, 10.40771342879313500, -28.53891855579973600 ) ) ; +#66617 = CARTESIAN_POINT ( 'NONE', ( 24.29325988836280800, 5.353368510949721300, -22.44012448543122700 ) ) ; +#66618 = FACE_OUTER_BOUND ( 'NONE', #65802, .T. ) ; +#66619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66620 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66621 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 33.87738371066728100, -28.70555803802996700 ) ) ; +#66622 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#66623 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66624 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 51.52858243452106300, -28.70555803802997700 ) ) ; +#66626 = ORIENTED_EDGE ( 'NONE', *, *, #34154, .T. ) ; +#66625 = CARTESIAN_POINT ( 'NONE', ( -10.87858748550013700, 71.76337688193821400, -28.37223523914899600 ) ) ; +#66627 = ADVANCED_FACE ( 'NONE', ( #74742 ), #72795, .F. ) ; +#66628 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002800, 18.53085164125335600, -28.45573375118225100 ) ) ; +#66629 = ORIENTED_EDGE ( 'NONE', *, *, #38181, .T. ) ; +#66630 = ADVANCED_FACE ( 'NONE', ( #27072 ), #39684, .T. ) ; +#66631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66632 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819428200, 61.65075715145307100, -28.20555803803005900 ) ) ; +#66633 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 36.60073525436786900, -28.70555803802995200 ) ) ; +#66634 = AXIS2_PLACEMENT_3D ( 'NONE', #52923, #15684, #59194 ) ; +#66635 = ORIENTED_EDGE ( 'NONE', *, *, #79112, .T. ) ; +#66636 = CIRCLE ( 'NONE', #75767, 9.500000000000099500 ) ; +#66637 = ORIENTED_EDGE ( 'NONE', *, *, #10319, .T. ) ; +#66638 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 38.00000000000000700, -1.205558038030005300 ) ) ; +#66639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66640 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609040400, 60.13716795162677200, -28.48697406221666400 ) ) ; +#66641 = FACE_OUTER_BOUND ( 'NONE', #62465, .T. ) ; +#66642 = FACE_OUTER_BOUND ( 'NONE', #41665, .T. ) ; +#66643 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66644 = ORIENTED_EDGE ( 'NONE', *, *, #61937, .T. ) ; +#66645 = VERTEX_POINT ( 'NONE', #19786 ) ; +#66646 = ORIENTED_EDGE ( 'NONE', *, *, #44007, .T. ) ; +#66647 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 20.67701665379220800, -28.20555803802994500 ) ) ; +#66648 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#66649 = AXIS2_PLACEMENT_3D ( 'NONE', #5659, #18175, #67691 ) ; +#66650 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868712900, 30.58486215880184400, -28.32821106611848800 ) ) ; +#66651 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900964300, 49.56267502090536700, -28.41043597897461100 ) ) ; +#66652 = CARTESIAN_POINT ( 'NONE', ( -9.382664866628333700, 57.15000000000000600, -0.08125897271439161400 ) ) ; +#66653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66654 = ADVANCED_FACE ( 'NONE', ( #78665 ), #6591, .T. ) ; +#66655 = EDGE_CURVE ( 'NONE', #16766, #40718, #23161, .T. ) ; +#66656 = CONICAL_SURFACE ( 'NONE', #61254, 10.00000000000009600, 0.7853981633974447300 ) ; +#66657 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#66658 = ORIENTED_EDGE ( 'NONE', *, *, #20475, .F. ) ; +#66659 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#66660 = FACE_OUTER_BOUND ( 'NONE', #66981, .T. ) ; +#66661 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985158300, 44.59761904761920400, -28.70555803802996700 ) ) ; +#66662 = VERTEX_POINT ( 'NONE', #75793 ) ; +#66663 = ORIENTED_EDGE ( 'NONE', *, *, #78968, .T. ) ; +#66664 = ORIENTED_EDGE ( 'NONE', *, *, #70341, .T. ) ; +#66665 = CARTESIAN_POINT ( 'NONE', ( -22.75045725738968000, 6.124777918593432300, -25.02476794886750300 ) ) ; +#66666 = ORIENTED_EDGE ( 'NONE', *, *, #66788, .F. ) ; +#66667 = ORIENTED_EDGE ( 'NONE', *, *, #73982, .F. ) ; +#66668 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2276, #76827, #58064, #8540, #52043, #14818, #58336, #21099 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.001719839228549898500, 0.002579758842824847800, 0.003439678457099797100 ), + .UNSPECIFIED. ) ; +#66669 = ORIENTED_EDGE ( 'NONE', *, *, #19780, .F. ) ; +#66670 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 41.67701665379185300, -28.20555803802996700 ) ) ; +#66671 = CIRCLE ( 'NONE', #28314, 8.000000000000000000 ) ; +#66672 = ORIENTED_EDGE ( 'NONE', *, *, #25807, .F. ) ; +#66673 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#66674 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 71.08083798124323500, -28.45106778992441600 ) ) ; +#66675 = ORIENTED_EDGE ( 'NONE', *, *, #26315, .T. ) ; +#66676 = EDGE_CURVE ( 'NONE', #719, #14016, #30490, .T. ) ; +#66677 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215565900, 55.79999999999925800, -28.20555803803047800 ) ) ; +#66678 = VERTEX_POINT ( 'NONE', #32285 ) ; +#66679 = FACE_OUTER_BOUND ( 'NONE', #13920, .T. ) ; +#66680 = EDGE_CURVE ( 'NONE', #76162, #25994, #56224, .T. ) ; +#66681 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#66682 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 6.500000000000005300, -4.865812075874393000 ) ) ; +#66683 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66684 = EDGE_CURVE ( 'NONE', #10158, #12827, #16007, .T. ) ; +#66685 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 67.94142842854307700, -28.20555803802997700 ) ) ; +#66686 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 46.66666666666668600, -8.133761268305512700 ) ) ; +#66687 = EDGE_CURVE ( 'NONE', #2580, #30748, #25103, .T. ) ; +#66688 = AXIS2_PLACEMENT_3D ( 'NONE', #15627, #59125, #21884 ) ; +#66689 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66690 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66691 = CONICAL_SURFACE ( 'NONE', #78315, 10.50000000000009600, 0.7853981633974500600 ) ; +#66692 = CARTESIAN_POINT ( 'NONE', ( -1.705837858217819500, 45.54999999999999700, -28.37136602294611300 ) ) ; +#66693 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66694 = ORIENTED_EDGE ( 'NONE', *, *, #46594, .F. ) ; +#66695 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044800, 59.08026449164335500, -28.70555803802997700 ) ) ; +#66696 = ORIENTED_EDGE ( 'NONE', *, *, #30933, .F. ) ; +#66697 = FACE_OUTER_BOUND ( 'NONE', #62787, .T. ) ; +#66698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66699 = AXIS2_PLACEMENT_3D ( 'NONE', #44040, #19319, #62867 ) ; +#66701 = VERTEX_POINT ( 'NONE', #20314 ) ; +#66700 = EDGE_CURVE ( 'NONE', #23406, #23348, #1520, .T. ) ; +#66702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66703 = EDGE_CURVE ( 'NONE', #11943, #69992, #45498, .T. ) ; +#66704 = EDGE_CURVE ( 'NONE', #12163, #5506, #67859, .T. ) ; +#66705 = ADVANCED_FACE ( 'NONE', ( #70823 ), #68878, .F. ) ; +#66706 = CARTESIAN_POINT ( 'NONE', ( 1.472335600148538400, 36.00238095238092500, -28.70555803802995200 ) ) ; +#66708 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#66707 = AXIS2_PLACEMENT_3D ( 'NONE', #1428, #44913, #38672 ) ; +#66709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66710 = CARTESIAN_POINT ( 'NONE', ( 10.55275555954751400, 91.89098624823329000, -28.70555803803001300 ) ) ; +#66711 = FACE_OUTER_BOUND ( 'NONE', #70401, .T. ) ; +#66712 = FACE_OUTER_BOUND ( 'NONE', #15139, .T. ) ; +#66713 = ORIENTED_EDGE ( 'NONE', *, *, #11291, .F. ) ; +#66714 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66716 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55893, #43628, #62436, #25169 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674731196642100E-007, 0.0002745102201809060600 ), + .UNSPECIFIED. ) ; +#66717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66718 = CONICAL_SURFACE ( 'NONE', #4669, 10.00000000000009600, 0.7853981633974447300 ) ; +#66719 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#66720 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 39.16749699759768800, -28.20555803802995200 ) ) ; +#66721 = AXIS2_PLACEMENT_3D ( 'NONE', #48198, #79790, #42497 ) ; +#66722 = EDGE_LOOP ( 'NONE', ( #71239, #79805, #33692, #32075 ) ) ; +#66723 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72737, #54212, #73007, #35733 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287125892400E-007, 0.0004318378175228919000 ), + .UNSPECIFIED. ) ; +#66725 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 79.97246552159074900, -28.38801640354893500 ) ) ; +#66726 = EDGE_CURVE ( 'NONE', #24516, #29577, #53394, .T. ) ; +#66728 = ORIENTED_EDGE ( 'NONE', *, *, #32374, .F. ) ; +#66727 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#66729 = ADVANCED_FACE ( 'NONE', ( #21217 ), #35793, .F. ) ; +#66730 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819626700, 81.65075715145296400, -28.20555803803005900 ) ) ; +#66731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66732 = AXIS2_PLACEMENT_3D ( 'NONE', #42260, #61077, #23807 ) ; +#66733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66734 = CIRCLE ( 'NONE', #18086, 10.50000000000009200 ) ; +#66735 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344611100, 49.42298334620778600, -28.20555803802997400 ) ) ; +#66736 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28126, #46824, #65639, #28413 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572453666600E-007, 0.0004669842289003670200 ), + .UNSPECIFIED. ) ; +#66737 = CIRCLE ( 'NONE', #64369, 10.00000000000009200 ) ; +#66738 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66739 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804094500, 73.65857157145660500, -28.37229765499311500 ) ) ; +#66740 = ORIENTED_EDGE ( 'NONE', *, *, #38047, .F. ) ; +#66741 = CARTESIAN_POINT ( 'NONE', ( -11.18892001661468100, 28.49322649091134700, -28.30799595738868700 ) ) ; +#66742 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 20.24660241562181900, -28.20555803802994200 ) ) ; +#66743 = ORIENTED_EDGE ( 'NONE', *, *, #35475, .F. ) ; +#66744 = ORIENTED_EDGE ( 'NONE', *, *, #23344, .T. ) ; +#66745 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237700, 71.43945992495532900, -28.34042301926881200 ) ) ; +#66746 = ORIENTED_EDGE ( 'NONE', *, *, #5669, .F. ) ; +#66747 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 69.63176086632792300, -28.70555803802997700 ) ) ; +#66748 = ORIENTED_EDGE ( 'NONE', *, *, #6515, .T. ) ; +#66749 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66750 = CONICAL_SURFACE ( 'NONE', #3090, 10.00000000000009400, 0.7853981633974447300 ) ; +#66751 = CARTESIAN_POINT ( 'NONE', ( -4.239894507327997000, 81.93585231025919300, -28.38420446581270400 ) ) ; +#66752 = CARTESIAN_POINT ( 'NONE', ( -3.499520597198422200, 50.90033558196106600, -28.70555803802997700 ) ) ; +#66753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66754 = ORIENTED_EDGE ( 'NONE', *, *, #75723, .F. ) ; +#66755 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18961, #56218, #456, #43948 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005921268870200E-007, 0.0004084731003434388700 ), + .UNSPECIFIED. ) ; +#66756 = ORIENTED_EDGE ( 'NONE', *, *, #69389, .T. ) ; +#66757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66759 = ADVANCED_FACE ( 'NONE', ( #4643 ), #2667, .F. ) ; +#66760 = ORIENTED_EDGE ( 'NONE', *, *, #67772, .T. ) ; +#66761 = CIRCLE ( 'NONE', #4985, 9.500000000000099500 ) ; +#66762 = AXIS2_PLACEMENT_3D ( 'NONE', #51275, #57578, #7786 ) ; +#66763 = ORIENTED_EDGE ( 'NONE', *, *, #11645, .T. ) ; +#66764 = CIRCLE ( 'NONE', #77783, 10.50000000000009600 ) ; +#66765 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 52.66666666666667100, 2.794441961969992100 ) ) ; +#66766 = AXIS2_PLACEMENT_3D ( 'NONE', #17569, #61090, #23829 ) ; +#66767 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5177, #79713, #23701, #48664 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251697100, 0.003631405919786739700 ), + .UNSPECIFIED. ) ; +#66768 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66770 = EDGE_CURVE ( 'NONE', #68913, #65375, #8532, .T. ) ; +#66771 = AXIS2_PLACEMENT_3D ( 'NONE', #24216, #80227, #42942 ) ; +#66772 = FACE_OUTER_BOUND ( 'NONE', #35745, .T. ) ; +#66773 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66774 = CIRCLE ( 'NONE', #20723, 10.00000000000009600 ) ; +#66775 = VERTEX_POINT ( 'NONE', #21135 ) ; +#66776 = ORIENTED_EDGE ( 'NONE', *, *, #69615, .T. ) ; +#66777 = CONICAL_SURFACE ( 'NONE', #17090, 10.00000000000009200, 0.7853981633974447300 ) ; +#66778 = ORIENTED_EDGE ( 'NONE', *, *, #24844, .F. ) ; +#66779 = CARTESIAN_POINT ( 'NONE', ( 16.63284240240255900, 91.33594477306131400, -28.57134884846556500 ) ) ; +#66780 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66781 = CARTESIAN_POINT ( 'NONE', ( 0.8996655518395197900, 60.79999999999999000, -28.20555803802988500 ) ) ; +#66782 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 91.59999999999999400, -28.70555803803001300 ) ) ; +#66783 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 24.00000000000000700, -1.205558038030002800 ) ) ; +#66784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66785 = CIRCLE ( 'NONE', #54661, 10.00000000000009400 ) ; +#66786 = CONICAL_SURFACE ( 'NONE', #30880, 10.50000000000009600, 0.7853981633974518300 ) ; +#66788 = EDGE_CURVE ( 'NONE', #74545, #61551, #38902, .T. ) ; +#66787 = ORIENTED_EDGE ( 'NONE', *, *, #11787, .T. ) ; +#66789 = EDGE_CURVE ( 'NONE', #21619, #9494, #24478, .T. ) ; +#66790 = CARTESIAN_POINT ( 'NONE', ( -10.69188627458393100, 39.58874248361072300, -28.53740755999535500 ) ) ; +#66791 = ORIENTED_EDGE ( 'NONE', *, *, #55931, .F. ) ; +#66792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66793 = VERTEX_POINT ( 'NONE', #39877 ) ; +#66794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66795 = EDGE_CURVE ( 'NONE', #10918, #22950, #54274, .T. ) ; +#66796 = ADVANCED_FACE ( 'NONE', ( #37714 ), #17290, .F. ) ; +#66797 = CARTESIAN_POINT ( 'NONE', ( -20.62929316041256600, 101.5627473926823400, -19.59626104996972600 ) ) ; +#66798 = EDGE_CURVE ( 'NONE', #1236, #66196, #10020, .T. ) ; +#66799 = CIRCLE ( 'NONE', #2221, 10.00000000000009600 ) ; +#66800 = AXIS2_PLACEMENT_3D ( 'NONE', #78839, #41547, #4284 ) ; +#66801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66802 = EDGE_LOOP ( 'NONE', ( #58410, #29934, #71975, #27402 ) ) ; +#66803 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 58.50000000000000700, -4.865812075874393000 ) ) ; +#66804 = EDGE_CURVE ( 'NONE', #53681, #35438, #41630, .T. ) ; +#66805 = ORIENTED_EDGE ( 'NONE', *, *, #6049, .T. ) ; +#66806 = CARTESIAN_POINT ( 'NONE', ( 23.02772599325359000, 1.972274006746262100, -24.94722842225378700 ) ) ; +#66807 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66808 = VERTEX_POINT ( 'NONE', #71417 ) ; +#66809 = ORIENTED_EDGE ( 'NONE', *, *, #59040, .F. ) ; +#66810 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66811 = ORIENTED_EDGE ( 'NONE', *, *, #33081, .F. ) ; +#66812 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488291200, 51.99560977511638500, -28.70555803803014400 ) ) ; +#66813 = CONICAL_SURFACE ( 'NONE', #9387, 10.00000000000009200, 0.7853981633974447300 ) ; +#66814 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102700, 19.55558404029871900, -28.45034744217088400 ) ) ; +#66815 = ADVANCED_FACE ( 'NONE', ( #50343 ), #48399, .F. ) ; +#66816 = CONICAL_SURFACE ( 'NONE', #54056, 10.00000000000009600, 0.7853981633974482800 ) ; +#66817 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074372300, 17.31967837323413300, -28.55467576046954600 ) ) ; +#66819 = ORIENTED_EDGE ( 'NONE', *, *, #9343, .T. ) ; +#66818 = CARTESIAN_POINT ( 'NONE', ( -15.49872383880586400, 13.42896305882236200, -28.53160243214818300 ) ) ; +#66820 = AXIS2_PLACEMENT_3D ( 'NONE', #8169, #51673, #14464 ) ; +#66821 = VERTEX_POINT ( 'NONE', #21925 ) ; +#66822 = EDGE_CURVE ( 'NONE', #32519, #4205, #76312, .T. ) ; +#66823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66824 = EDGE_CURVE ( 'NONE', #60981, #36153, #33847, .T. ) ; +#66825 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66826 = EDGE_CURVE ( 'NONE', #46150, #49811, #65011, .T. ) ; +#66827 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183300, 49.63131911501876200, -28.51286550264510200 ) ) ; +#66828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66829 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22821, #60098, #72606, #35351 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653030300 ), + .UNSPECIFIED. ) ; +#66830 = CIRCLE ( 'NONE', #52869, 10.50000000000009200 ) ; +#66831 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528178400, 49.63131911501876200, -28.51286550264510900 ) ) ; +#66832 = AXIS2_PLACEMENT_3D ( 'NONE', #2640, #77459, #52691 ) ; +#66833 = CARTESIAN_POINT ( 'NONE', ( 3.985743576842280400, 81.58004100757882800, -28.24987021275312700 ) ) ; +#66834 = ADVANCED_FACE ( 'NONE', ( #729 ), #15933, .T. ) ; +#66835 = EDGE_LOOP ( 'NONE', ( #23512, #61186, #76739, #59786 ) ) ; +#66836 = FACE_OUTER_BOUND ( 'NONE', #8143, .T. ) ; +#66837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66839 = FACE_OUTER_BOUND ( 'NONE', #44481, .T. ) ; +#66840 = EDGE_CURVE ( 'NONE', #4291, #42613, #61886, .T. ) ; +#66841 = AXIS2_PLACEMENT_3D ( 'NONE', #50299, #62868, #6816 ) ; +#66842 = AXIS2_PLACEMENT_3D ( 'NONE', #70298, #33047, #76552 ) ; +#66843 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66844 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50050, #6577, #62617, #25366 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572466748500E-007, 0.0007596410370205549400 ), + .UNSPECIFIED. ) ; +#66846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66847 = VERTEX_POINT ( 'NONE', #47165 ) ; +#66848 = ADVANCED_FACE ( 'NONE', ( #19233 ), #29981, .F. ) ; +#66849 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 70.13716795162658000, -28.48697406221667800 ) ) ; +#66850 = CONICAL_SURFACE ( 'NONE', #66762, 10.00000000000009200, 0.7853981633974447300 ) ; +#66852 = VERTEX_POINT ( 'NONE', #28763 ) ; +#66851 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 58.16545993132821500, -28.70555803802999500 ) ) ; +#66853 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429200, 36.92318720225498700, -28.70555803802995200 ) ) ; +#66854 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 64.83333333333334300, 9.794441961969999600 ) ) ; +#66855 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65383, #53076, #71879, #34616 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169801700E-007, 0.001119324643800066700 ), + .UNSPECIFIED. ) ; +#66856 = CIRCLE ( 'NONE', #33695, 9.500000000000099500 ) ; +#66857 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#66858 = ORIENTED_EDGE ( 'NONE', *, *, #64382, .T. ) ; +#66859 = ORIENTED_EDGE ( 'NONE', *, *, #73354, .F. ) ; +#66860 = FACE_OUTER_BOUND ( 'NONE', #44823, .T. ) ; +#66861 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 30.00000000000000700, -6.205558038030003100 ) ) ; +#66862 = AXIS2_PLACEMENT_3D ( 'NONE', #32133, #75641, #38353 ) ; +#66863 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000000400, 81.43250300240228500, -28.20555803802997700 ) ) ; +#66864 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66865 = ORIENTED_EDGE ( 'NONE', *, *, #10636, .T. ) ; +#66866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50553, #44288, #796, #13353 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721302500, 0.0008252574424209129800 ), + .UNSPECIFIED. ) ; +#66867 = AXIS2_PLACEMENT_3D ( 'NONE', #6458, #12747, #80722 ) ; +#66868 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703000, 46.48096581827313400, -28.69431509262337300 ) ) ; +#66869 = CONICAL_SURFACE ( 'NONE', #77542, 10.50000000000009600, 0.7853981633974500600 ) ; +#66870 = FACE_OUTER_BOUND ( 'NONE', #44442, .T. ) ; +#66871 = ORIENTED_EDGE ( 'NONE', *, *, #7916, .F. ) ; +#66872 = CARTESIAN_POINT ( 'NONE', ( -8.884099215926085000, 44.44999999999999600, 0.1238496101745212400 ) ) ; +#66873 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66874 = EDGE_CURVE ( 'NONE', #56225, #59807, #63045, .T. ) ; +#66875 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 32.33333333333333600, 8.320721403598817300 ) ) ; +#66876 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528187700, 28.63131911501876900, -28.51286550264507700 ) ) ; +#66877 = AXIS2_PLACEMENT_3D ( 'NONE', #71048, #33786, #77294 ) ; +#66878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#66879 = ORIENTED_EDGE ( 'NONE', *, *, #18301, .T. ) ; +#66880 = AXIS2_PLACEMENT_3D ( 'NONE', #73714, #79970, #30221 ) ; +#66881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66882 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66884 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#66885 = CARTESIAN_POINT ( 'NONE', ( 21.46376187829121600, 6.768507587485713900, -26.34118869005910600 ) ) ; +#66886 = CONICAL_SURFACE ( 'NONE', #20981, 10.00000000000009400, 0.7853981633974447300 ) ; +#66887 = ORIENTED_EDGE ( 'NONE', *, *, #63503, .F. ) ; +#66888 = AXIS2_PLACEMENT_3D ( 'NONE', #42565, #5331, #48810 ) ; +#66889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66890 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000004400, 22.99926474563216100, -28.70555803802995200 ) ) ; +#66891 = ORIENTED_EDGE ( 'NONE', *, *, #75856, .F. ) ; +#66892 = ORIENTED_EDGE ( 'NONE', *, *, #19766, .F. ) ; +#66893 = ORIENTED_EDGE ( 'NONE', *, *, #67557, .F. ) ; +#66894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66895 = ORIENTED_EDGE ( 'NONE', *, *, #39799, .F. ) ; +#66896 = CARTESIAN_POINT ( 'NONE', ( 19.38386245728817800, 100.3681207558789100, -23.52172094991589200 ) ) ; +#66897 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812300, 59.60439022488336000, -28.70555803802997700 ) ) ; +#66898 = FACE_OUTER_BOUND ( 'NONE', #77656, .T. ) ; +#66899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66900 = ORIENTED_EDGE ( 'NONE', *, *, #39735, .T. ) ; +#66901 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21133, #64657, #2588, #46098 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.001246264537621154400 ), + .UNSPECIFIED. ) ; +#66903 = ADVANCED_FACE ( 'NONE', ( #79583 ), #61099, .F. ) ; +#66904 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528039300400, 63.65857157145681100, -28.37229765499286000 ) ) ; +#66905 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 69.60439022488334600, -28.70555803802997700 ) ) ; +#66906 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#66907 = CIRCLE ( 'NONE', #18459, 9.500000000000099500 ) ; +#66908 = EDGE_CURVE ( 'NONE', #42511, #4061, #47367, .T. ) ; +#66909 = ORIENTED_EDGE ( 'NONE', *, *, #61970, .F. ) ; +#66910 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 35.83333333333335000, -3.349151577478984600 ) ) ; +#66911 = VERTEX_POINT ( 'NONE', #3941 ) ; +#66912 = EDGE_CURVE ( 'NONE', #36153, #56191, #66945, .T. ) ; +#66913 = CONICAL_SURFACE ( 'NONE', #16259, 10.50000000000009600, 0.7853981633974518300 ) ; +#66914 = ADVANCED_FACE ( 'NONE', ( #46441 ), #11460, .T. ) ; +#66915 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66916 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#66917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66918 = CARTESIAN_POINT ( 'NONE', ( -7.593363006074227400, 57.15000000000005500, -6.931013282388509100 ) ) ; +#66919 = EDGE_CURVE ( 'NONE', #73343, #13816, #28030, .T. ) ; +#66920 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890869900, 60.49763722318500200, -28.32100408376068400 ) ) ; +#66921 = ORIENTED_EDGE ( 'NONE', *, *, #38037, .T. ) ; +#66922 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#66923 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280155800, 70.69966441803794100, -28.70555803803047500 ) ) ; +#66924 = EDGE_CURVE ( 'NONE', #57837, #72596, #32939, .T. ) ; +#66925 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715500, 30.74660241562189700, -28.20555803802995200 ) ) ; +#66926 = EDGE_CURVE ( 'NONE', #49395, #78759, #15358, .T. ) ; +#66927 = FACE_OUTER_BOUND ( 'NONE', #56270, .T. ) ; +#66928 = VERTEX_POINT ( 'NONE', #66782 ) ; +#66929 = ADVANCED_FACE ( 'NONE', ( #31898 ), #79039, .T. ) ; +#66930 = CARTESIAN_POINT ( 'NONE', ( -24.82406989062911500, 5.087962000824444600, -20.87171217337052200 ) ) ; +#66931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66932 = VERTEX_POINT ( 'NONE', #54526 ) ; +#66933 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#66934 = CIRCLE ( 'NONE', #13873, 10.50000000000009800 ) ; +#66935 = AXIS2_PLACEMENT_3D ( 'NONE', #23928, #73418, #42378 ) ; +#66936 = EDGE_CURVE ( 'NONE', #26683, #16363, #18486, .T. ) ; +#66937 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39659, #70931, #8888, #52408 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726977425200, 0.0008135742306951430700 ), + .UNSPECIFIED. ) ; +#66938 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66939 = EDGE_CURVE ( 'NONE', #39832, #22912, #4017, .T. ) ; +#66940 = ORIENTED_EDGE ( 'NONE', *, *, #36176, .T. ) ; +#66941 = EDGE_CURVE ( 'NONE', #28171, #47643, #13420, .T. ) ; +#66942 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 90.16749699759768100, -28.20555803802997700 ) ) ; +#66943 = ADVANCED_FACE ( 'NONE', ( #77621 ), #26054, .T. ) ; +#66944 = AXIS2_PLACEMENT_3D ( 'NONE', #24681, #55665, #61958 ) ; +#66945 = CIRCLE ( 'NONE', #59927, 10.50000000000009900 ) ; +#66946 = EDGE_LOOP ( 'NONE', ( #47741, #26077, #64390, #75768 ) ) ; +#66947 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#66948 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51054, #7553, #63639, #26377 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736099276700E-007, 0.0006649316450227305500 ), + .UNSPECIFIED. ) ; +#66949 = ORIENTED_EDGE ( 'NONE', *, *, #16722, .F. ) ; +#66950 = AXIS2_PLACEMENT_3D ( 'NONE', #68180, #30937, #74455 ) ; +#66951 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 4.333333333333346400, 1.294441961969997200 ) ) ; +#66952 = AXIS2_PLACEMENT_3D ( 'NONE', #50887, #13708, #19941 ) ; +#66953 = AXIS2_PLACEMENT_3D ( 'NONE', #59132, #21889, #65444 ) ; +#66954 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#66955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66956 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 44.49999999999999300, 4.650848422521016300 ) ) ; +#66957 = FACE_OUTER_BOUND ( 'NONE', #66556, .T. ) ; +#66958 = CONICAL_SURFACE ( 'NONE', #68857, 10.50000000000009600, 0.7853981633974500600 ) ; +#66959 = ORIENTED_EDGE ( 'NONE', *, *, #72163, .F. ) ; +#66960 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#66961 = ORIENTED_EDGE ( 'NONE', *, *, #32940, .F. ) ; +#66962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66963 = ORIENTED_EDGE ( 'NONE', *, *, #27270, .T. ) ; +#66964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66965 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66966 = ORIENTED_EDGE ( 'NONE', *, *, #179, .F. ) ; +#66967 = ORIENTED_EDGE ( 'NONE', *, *, #45220, .F. ) ; +#66968 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 9.666666666666683800, -8.133761268305512700 ) ) ; +#66969 = ORIENTED_EDGE ( 'NONE', *, *, #31269, .F. ) ; +#66970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66971 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#66972 = AXIS2_PLACEMENT_3D ( 'NONE', #30449, #36665, #67694 ) ; +#66973 = VERTEX_POINT ( 'NONE', #79827 ) ; +#66974 = EDGE_CURVE ( 'NONE', #46380, #34215, #70328, .T. ) ; +#66975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66976 = ORIENTED_EDGE ( 'NONE', *, *, #67888, .F. ) ; +#66977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66978 = FACE_OUTER_BOUND ( 'NONE', #44653, .T. ) ; +#66979 = CARTESIAN_POINT ( 'NONE', ( 17.70883560898008100, 61.21894733120746000, -28.33409528117022400 ) ) ; +#66980 = ORIENTED_EDGE ( 'NONE', *, *, #15861, .F. ) ; +#66981 = EDGE_LOOP ( 'NONE', ( #71593, #11420, #17513 ) ) ; +#66982 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999994700, 17.41684396980717500, -28.70555803802997400 ) ) ; +#66983 = EDGE_CURVE ( 'NONE', #2137, #23241, #44480, .T. ) ; +#66984 = ORIENTED_EDGE ( 'NONE', *, *, #22075, .F. ) ; +#66985 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000200, 30.93250300240229200, -28.20555803802996700 ) ) ; +#66986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#66988 = AXIS2_PLACEMENT_3D ( 'NONE', #17591, #36077, #61107 ) ; +#66989 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#66990 = CARTESIAN_POINT ( 'NONE', ( 11.00202449666890200, 39.28907889423216200, -28.25433304472395000 ) ) ; +#66991 = CONICAL_SURFACE ( 'NONE', #51583, 10.50000000000009800, 0.7853981633974518300 ) ; +#66992 = CARTESIAN_POINT ( 'NONE', ( -11.32247251554057300, 9.342828874293916300, -28.51468825946483000 ) ) ; +#66993 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548967200, 30.94069092601378300, -28.35186440610858200 ) ) ; +#66994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66995 = ORIENTED_EDGE ( 'NONE', *, *, #42957, .T. ) ; +#66996 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27307, #8485, #39779, #2498 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185305600E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#66997 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 80.34267608797603100, -28.20555803802997700 ) ) ; +#66998 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707776300, 51.66410593583299300, -28.68054222049973800 ) ) ; +#66999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67001 = AXIS2_PLACEMENT_3D ( 'NONE', #4507, #47991, #10775 ) ; +#67002 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#67003 = FACE_OUTER_BOUND ( 'NONE', #67200, .T. ) ; +#67004 = ORIENTED_EDGE ( 'NONE', *, *, #54886, .F. ) ; +#67005 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285572300, 63.67681279774481600, -28.70555803803030800 ) ) ; +#67006 = ORIENTED_EDGE ( 'NONE', *, *, #59222, .T. ) ; +#67007 = CARTESIAN_POINT ( 'NONE', ( -11.34615384615368700, 70.79999999999998300, -28.55171188418375600 ) ) ; +#67008 = AXIS2_PLACEMENT_3D ( 'NONE', #37420, #177, #43672 ) ; +#67009 = PLANE ( 'NONE', #40366 ) ; +#67010 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 10.00000000000000000, -28.70555803803001300 ) ) ; +#67011 = EDGE_CURVE ( 'NONE', #71240, #39861, #55862, .T. ) ; +#67012 = FACE_OUTER_BOUND ( 'NONE', #52725, .T. ) ; +#67013 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 71.61077422949655600, -28.37255355648634100 ) ) ; +#67014 = ORIENTED_EDGE ( 'NONE', *, *, #26445, .T. ) ; +#67015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47475, #78271, #16521, #60058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137489448900 ), + .UNSPECIFIED. ) ; +#67016 = ORIENTED_EDGE ( 'NONE', *, *, #61376, .T. ) ; +#67017 = ADVANCED_FACE ( 'NONE', ( #59121 ), #24099, .F. ) ; +#67018 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 50.50000000000000700, -7.061964498581016200 ) ) ; +#67019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67021 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67022 = CARTESIAN_POINT ( 'NONE', ( -18.01268492844081200, 41.29362734601330200, -28.24165217761328300 ) ) ; +#67023 = ADVANCED_FACE ( 'NONE', ( #42559 ), #71789, .T. ) ; +#67024 = CONICAL_SURFACE ( 'NONE', #59790, 10.50000000000009600, 0.7853981633974500600 ) ; +#67025 = ORIENTED_EDGE ( 'NONE', *, *, #67280, .T. ) ; +#67026 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#67027 = CONICAL_SURFACE ( 'NONE', #61023, 10.50000000000009400, 0.7853981633974500600 ) ; +#67028 = EDGE_LOOP ( 'NONE', ( #69132, #6719, #50991, #14364 ) ) ; +#67030 = EDGE_CURVE ( 'NONE', #55826, #27304, #41407, .T. ) ; +#67029 = EDGE_LOOP ( 'NONE', ( #14988, #14928, #61665 ) ) ; +#67031 = EDGE_CURVE ( 'NONE', #11478, #71770, #75662, .T. ) ; +#67032 = EDGE_LOOP ( 'NONE', ( #4831, #22015, #8164, #24685, #41183 ) ) ; +#67033 = PLANE ( 'NONE', #77161 ) ; +#67034 = CONICAL_SURFACE ( 'NONE', #2213, 10.00000000000009200, 0.7853981633974447300 ) ; +#67035 = ORIENTED_EDGE ( 'NONE', *, *, #20116, .F. ) ; +#67036 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78810, #35296, #41516, #4247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052653856500E-007, 0.0003301033223275558100 ), + .UNSPECIFIED. ) ; +#67037 = EDGE_LOOP ( 'NONE', ( #22029, #68139, #79531 ) ) ; +#67038 = VERTEX_POINT ( 'NONE', #36820 ) ; +#67039 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .T. ) ; +#67040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67041 = ORIENTED_EDGE ( 'NONE', *, *, #18439, .T. ) ; +#67042 = AXIS2_PLACEMENT_3D ( 'NONE', #58209, #39439, #20975 ) ; +#67043 = VERTEX_POINT ( 'NONE', #55587 ) ; +#67044 = EDGE_CURVE ( 'NONE', #27571, #65165, #26981, .T. ) ; +#67045 = EDGE_CURVE ( 'NONE', #55249, #76937, #7514, .T. ) ; +#67046 = CARTESIAN_POINT ( 'NONE', ( 17.07349184251556600, 70.22161678501139200, -28.29547179040480700 ) ) ; +#67047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67049 = CARTESIAN_POINT ( 'NONE', ( 2.716823492900948700, 20.53732497909461700, -28.41043597897460800 ) ) ; +#67050 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 21.83333333333333600, 1.741883078712340300 ) ) ; +#67051 = EDGE_CURVE ( 'NONE', #46914, #30245, #12514, .T. ) ; +#67052 = FACE_OUTER_BOUND ( 'NONE', #64255, .T. ) ; +#67053 = AXIS2_PLACEMENT_3D ( 'NONE', #45213, #51469, #1715 ) ; +#67054 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67055 = CARTESIAN_POINT ( 'NONE', ( -17.12369736223639200, 61.76592160028471300, -28.37510699173780900 ) ) ; +#67056 = VERTEX_POINT ( 'NONE', #12370 ) ; +#67057 = ORIENTED_EDGE ( 'NONE', *, *, #14638, .F. ) ; +#67058 = ORIENTED_EDGE ( 'NONE', *, *, #36180, .F. ) ; +#67059 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67060 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#67061 = FACE_OUTER_BOUND ( 'NONE', #51451, .T. ) ; +#67062 = AXIS2_PLACEMENT_3D ( 'NONE', #48162, #10960, #54445 ) ; +#67063 = CARTESIAN_POINT ( 'NONE', ( 3.669601779484722200, 71.01872124563895700, -28.53757464917590200 ) ) ; +#67065 = ORIENTED_EDGE ( 'NONE', *, *, #15710, .T. ) ; +#67064 = AXIS2_PLACEMENT_3D ( 'NONE', #56723, #19474, #62999 ) ; +#67066 = ORIENTED_EDGE ( 'NONE', *, *, #51519, .F. ) ; +#67067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80119, #30378, #5600, #49078 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849868800, 0.0007596411030280978000 ), + .UNSPECIFIED. ) ; +#67068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67069 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 81.65075715145215400, -28.20555803803047800 ) ) ; +#67070 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#67071 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 56.33333333333335000, 1.294441961969997200 ) ) ; +#67072 = FACE_OUTER_BOUND ( 'NONE', #76221, .T. ) ; +#67073 = CARTESIAN_POINT ( 'NONE', ( 21.52908460072908200, 6.735457699635217600, -26.30484836595934400 ) ) ; +#67074 = ORIENTED_EDGE ( 'NONE', *, *, #30351, .F. ) ; +#67075 = CARTESIAN_POINT ( 'NONE', ( -4.155502077150669200, 39.27966528189953300, -28.30868034705250100 ) ) ; +#67076 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67077 = ORIENTED_EDGE ( 'NONE', *, *, #39247, .F. ) ; +#67078 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430200, 31.17701665379239600, -28.20555803802996000 ) ) ; +#67079 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 69.94924284854670300, -28.20555803803047800 ) ) ; +#67080 = CARTESIAN_POINT ( 'NONE', ( 8.939071942967052200, 10.00000000000003700, -28.70555803802998100 ) ) ; +#67081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67082 = AXIS2_PLACEMENT_3D ( 'NONE', #66659, #35410, #4357 ) ; +#67083 = EDGE_CURVE ( 'NONE', #38445, #29736, #78844, .T. ) ; +#67084 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671529600, 51.93585231025925000, -28.38420446581316300 ) ) ; +#67085 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.62753447840926700, -28.38801640354892800 ) ) ; +#67086 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142857247400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#67087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67088 = CARTESIAN_POINT ( 'NONE', ( -3.040273598549590300, 49.72437813624630800, -28.30310527599301600 ) ) ; +#67089 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67090 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67091 = CONICAL_SURFACE ( 'NONE', #15000, 10.00000000000009200, 0.7853981633974447300 ) ; +#67092 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 63.43454006867097000, -28.70555803803024400 ) ) ; +#67093 = EDGE_CURVE ( 'NONE', #38741, #43792, #64389, .T. ) ; +#67094 = FACE_OUTER_BOUND ( 'NONE', #36545, .T. ) ; +#67095 = CARTESIAN_POINT ( 'NONE', ( 17.70918219830883100, 28.45045548864057500, -28.33400579219035000 ) ) ; +#67096 = ORIENTED_EDGE ( 'NONE', *, *, #55130, .T. ) ; +#67097 = AXIS2_PLACEMENT_3D ( 'NONE', #46963, #53244, #3458 ) ; +#67098 = ORIENTED_EDGE ( 'NONE', *, *, #36423, .F. ) ; +#67099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67101 = EDGE_LOOP ( 'NONE', ( #74269, #36909, #34933, #14977 ) ) ; +#67102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67104 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 80.16349705304865800, -28.30782889147482400 ) ) ; +#67105 = ADVANCED_FACE ( 'NONE', ( #73739 ), #56124, .T. ) ; +#67106 = CIRCLE ( 'NONE', #25356, 10.00000000000009400 ) ; +#67107 = ORIENTED_EDGE ( 'NONE', *, *, #37563, .T. ) ; +#67108 = CIRCLE ( 'NONE', #78168, 10.00000000000009200 ) ; +#67109 = AXIS2_PLACEMENT_3D ( 'NONE', #11209, #41926, #48418 ) ; +#67110 = ORIENTED_EDGE ( 'NONE', *, *, #58473, .T. ) ; +#67111 = ORIENTED_EDGE ( 'NONE', *, *, #63189, .F. ) ; +#67112 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.68929190448937300, -28.20555803802997700 ) ) ; +#67113 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#67114 = EDGE_LOOP ( 'NONE', ( #1348, #58329, #46306, #38978, #27331 ) ) ; +#67115 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 62.66666666666667100, -10.73183747965883100 ) ) ; +#67116 = CIRCLE ( 'NONE', #23583, 2.499999999999998700 ) ; +#67117 = VERTEX_POINT ( 'NONE', #50106 ) ; +#67118 = ORIENTED_EDGE ( 'NONE', *, *, #18474, .F. ) ; +#67119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39536, #27057, #33025, #2258 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716404000, 0.004080294652942880300 ), + .UNSPECIFIED. ) ; +#67120 = ORIENTED_EDGE ( 'NONE', *, *, #44814, .F. ) ; +#67122 = VERTEX_POINT ( 'NONE', #43851 ) ; +#67121 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189906300, 28.12363993080123600, -28.38670679782145700 ) ) ; +#67123 = EDGE_LOOP ( 'NONE', ( #27986, #62727, #75760, #75166 ) ) ; +#67124 = ADVANCED_FACE ( 'NONE', ( #55208 ), #31403, .T. ) ; +#67125 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 27.83333333333333200, 3.794441961969996900 ) ) ; +#67126 = AXIS2_PLACEMENT_3D ( 'NONE', #73240, #35968, #79497 ) ; +#67127 = ORIENTED_EDGE ( 'NONE', *, *, #10212, .F. ) ; +#67128 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957519700, 17.00972971738994100, -28.70555803802993100 ) ) ; +#67129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67130 = ORIENTED_EDGE ( 'NONE', *, *, #11713, .T. ) ; +#67131 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67132 = CIRCLE ( 'NONE', #28728, 10.00000000000009600 ) ; +#67133 = ORIENTED_EDGE ( 'NONE', *, *, #55828, .T. ) ; +#67134 = CARTESIAN_POINT ( 'NONE', ( -6.300705840951111200, 44.45000000000016600, 4.011003409769386100 ) ) ; +#67135 = ORIENTED_EDGE ( 'NONE', *, *, #57775, .T. ) ; +#67136 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#67137 = VERTEX_POINT ( 'NONE', #62668 ) ; +#67138 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 30.16666666666668200, -12.20555803803000000 ) ) ; +#67139 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339032400, 81.46283204837304500, -28.48697406221690500 ) ) ; +#67140 = ORIENTED_EDGE ( 'NONE', *, *, #29684, .T. ) ; +#67141 = ORIENTED_EDGE ( 'NONE', *, *, #4594, .T. ) ; +#67142 = CARTESIAN_POINT ( 'NONE', ( -17.91635473408273400, 70.38586625357844200, -28.27331438134757100 ) ) ; +#67143 = CIRCLE ( 'NONE', #13958, 10.50000000000009600 ) ; +#67144 = VERTEX_POINT ( 'NONE', #356 ) ; +#67145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67147 = EDGE_LOOP ( 'NONE', ( #43886, #33096, #52349, #80150 ) ) ; +#67146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67148 = ADVANCED_FACE ( 'NONE', ( #38642 ), #53268, .F. ) ; +#67149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67150 = CARTESIAN_POINT ( 'NONE', ( 19.39858383424887500, 7.801298154940412600, -27.70268440997211100 ) ) ; +#67151 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985187900, 15.00238095238098900, -28.70555803803042500 ) ) ; +#67152 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67153 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#67154 = CIRCLE ( 'NONE', #58761, 10.50000000000009800 ) ; +#67155 = VERTEX_POINT ( 'NONE', #623 ) ; +#67156 = EDGE_CURVE ( 'NONE', #47732, #75712, #49853, .T. ) ; +#67157 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#67158 = VERTEX_POINT ( 'NONE', #13179 ) ; +#67159 = CARTESIAN_POINT ( 'NONE', ( 18.10995735866418200, 97.82018447316527000, -26.53685704920870900 ) ) ; +#67161 = ORIENTED_EDGE ( 'NONE', *, *, #21193, .F. ) ; +#67160 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492634400, 49.07379779496234600, -28.70555803802996700 ) ) ; +#67162 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75175, #43849, #6894, #50364 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122924823800, 0.0007303749718171205900 ), + .UNSPECIFIED. ) ; +#67165 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925614400, 27.81967837323414400, -28.55467576046955700 ) ) ; +#67166 = EDGE_CURVE ( 'NONE', #61248, #66098, #35459, .T. ) ; +#67167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67168 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67169 = AXIS2_PLACEMENT_3D ( 'NONE', #62826, #504, #246 ) ; +#67170 = CIRCLE ( 'NONE', #63637, 9.500000000000168800 ) ; +#67171 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 33.66666666666667900, 2.794441961969992100 ) ) ; +#67172 = CARTESIAN_POINT ( 'NONE', ( 11.00202872172428100, 41.31091476818471600, -28.25432823872345300 ) ) ; +#67173 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#67174 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53136, #9627, #59414, #22150 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389882381100E-007, 0.0008082646680357337700 ), + .UNSPECIFIED. ) ; +#67175 = CIRCLE ( 'NONE', #40504, 10.50000000000009200 ) ; +#67176 = ORIENTED_EDGE ( 'NONE', *, *, #30163, .F. ) ; +#67177 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51793, #33059, #20834, #64386 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377688426957000E-007, 0.0007331055842533677500 ), + .UNSPECIFIED. ) ; +#67178 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328921000, 20.73798719401656500, -28.29447340919110600 ) ) ; +#67179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67180 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67181 = AXIS2_PLACEMENT_3D ( 'NONE', #17762, #54996, #30029 ) ; +#67182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67183 = CARTESIAN_POINT ( 'NONE', ( -0.5618686545626403500, 57.15000000000002000, -10.60384845430136600 ) ) ; +#67184 = EDGE_CURVE ( 'NONE', #65731, #63749, #20994, .T. ) ; +#67185 = EDGE_CURVE ( 'NONE', #21953, #9389, #6507, .T. ) ; +#67186 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5608, #61656, #55631, #18388 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.214306433183765000E-017, 0.002676326193402439600 ), + .UNSPECIFIED. ) ; +#67187 = AXIS2_PLACEMENT_3D ( 'NONE', #29132, #60379, #23106 ) ; +#67188 = CIRCLE ( 'NONE', #60750, 10.50000000000009600 ) ; +#67189 = CARTESIAN_POINT ( 'NONE', ( -16.93949773756162000, 93.53949773756163200, -28.51567264113192500 ) ) ; +#67190 = EDGE_LOOP ( 'NONE', ( #14866, #43651, #36549, #74094 ) ) ; +#67191 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .F. ) ; +#67192 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67193 = VERTEX_POINT ( 'NONE', #56945 ) ; +#67194 = CONICAL_SURFACE ( 'NONE', #24064, 10.50000000000009600, 0.7853981633974518300 ) ; +#67195 = EDGE_LOOP ( 'NONE', ( #50593, #12390, #16790, #33941, #63086 ) ) ; +#67196 = AXIS2_PLACEMENT_3D ( 'NONE', #51859, #2109, #8349 ) ; +#67197 = EDGE_LOOP ( 'NONE', ( #102, #78917, #68340, #77603 ) ) ; +#67198 = EDGE_LOOP ( 'NONE', ( #68733, #9274, #73698, #52504 ) ) ; +#67199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67200 = EDGE_LOOP ( 'NONE', ( #73459, #56837, #43879, #19565 ) ) ; +#67201 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963500, 39.15930907398619400, -28.35186440610857500 ) ) ; +#67203 = ORIENTED_EDGE ( 'NONE', *, *, #48181, .F. ) ; +#67202 = EDGE_CURVE ( 'NONE', #74697, #53696, #69810, .T. ) ; +#67204 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.47246552159110400, -28.38801640354855500 ) ) ; +#67205 = AXIS2_PLACEMENT_3D ( 'NONE', #27420, #45848, #77158 ) ; +#67206 = AXIS2_PLACEMENT_3D ( 'NONE', #66521, #29299, #72783 ) ; +#67207 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215551100, 86.13383585008099900, -28.37247596307048200 ) ) ; +#67208 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67209 = ADVANCED_FACE ( 'NONE', ( #57183 ), #3619, .T. ) ; +#67210 = CIRCLE ( 'NONE', #24990, 9.500000000000099500 ) ; +#67211 = VERTEX_POINT ( 'NONE', #19954 ) ; +#67212 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.47246552159110400, -28.38801640354855800 ) ) ; +#67213 = ORIENTED_EDGE ( 'NONE', *, *, #57157, .T. ) ; +#67214 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ; +#67215 = ORIENTED_EDGE ( 'NONE', *, *, #34012, .F. ) ; +#67216 = ORIENTED_EDGE ( 'NONE', *, *, #29788, .T. ) ; +#67217 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576917600, 35.04999999999999700, -28.65220501466659500 ) ) ; +#67218 = FACE_OUTER_BOUND ( 'NONE', #3559, .T. ) ; +#67219 = ADVANCED_FACE ( 'NONE', ( #5589 ), #63486, .T. ) ; +#67220 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 2.166666666666683400, -2.545304000185620600 ) ) ; +#67221 = ORIENTED_EDGE ( 'NONE', *, *, #66570, .F. ) ; +#67222 = CARTESIAN_POINT ( 'NONE', ( -11.72090442826401900, 71.50050415885242200, -28.63287458792238400 ) ) ; +#67223 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19981, #57229, #69730, #32472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866668103500E-007, 0.001076778502991528700 ), + .UNSPECIFIED. ) ; +#67224 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 67.46443389862717800, -28.54207364681942100 ) ) ; +#67225 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 42.33333333333334300, -5.205558038030008400 ) ) ; +#67226 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #50207, #62486 ) ; +#67227 = CARTESIAN_POINT ( 'NONE', ( 10.98574357684228200, 61.58004100757867100, -28.24987021275329000 ) ) ; +#67228 = CIRCLE ( 'NONE', #53522, 10.00000000000009200 ) ; +#67230 = ORIENTED_EDGE ( 'NONE', *, *, #13468, .F. ) ; +#67229 = ADVANCED_FACE ( 'NONE', ( #20196 ), #34803, .T. ) ; +#67231 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 7.500000000000006200, 4.650848422521016300 ) ) ; +#67233 = ORIENTED_EDGE ( 'NONE', *, *, #3518, .F. ) ; +#67232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67235 = AXIS2_PLACEMENT_3D ( 'NONE', #20982, #64518, #27237 ) ; +#67236 = ADVANCED_FACE ( 'NONE', ( #67873 ), #1666, .F. ) ; +#67237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67238 = EDGE_CURVE ( 'NONE', #38367, #75777, #18240, .T. ) ; +#67239 = PLANE ( 'NONE', #31215 ) ; +#67240 = AXIS2_PLACEMENT_3D ( 'NONE', #34371, #77881, #40601 ) ; +#67241 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462965300, 51.25732391202377200, -28.20555803803014400 ) ) ; +#67242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67243 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#67244 = ORIENTED_EDGE ( 'NONE', *, *, #10569, .F. ) ; +#67245 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#67246 = VERTEX_POINT ( 'NONE', #7664 ) ; +#67247 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003200, 51.23796787468685900, -28.38801640354854800 ) ) ; +#67248 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#67249 = EDGE_LOOP ( 'NONE', ( #67275, #50627, #11516, #72376 ) ) ; +#67250 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67251 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67254 = CARTESIAN_POINT ( 'NONE', ( -11.33104051008494300, 90.78519534244644300, -28.53901988778293500 ) ) ; +#67255 = PLANE ( 'NONE', #107 ) ; +#67256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67257 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#67258 = CIRCLE ( 'NONE', #32015, 9.500000000000099500 ) ; +#67259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67260 = EDGE_LOOP ( 'NONE', ( #75233, #21418, #73742, #55553 ) ) ; +#67261 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#67262 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656715200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#67263 = EDGE_LOOP ( 'NONE', ( #54485, #72918, #31820 ) ) ; +#67264 = EDGE_CURVE ( 'NONE', #22629, #51916, #72848, .T. ) ; +#67265 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715200, 20.24660241562189000, -28.20555803802994200 ) ) ; +#67266 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67267 = FACE_OUTER_BOUND ( 'NONE', #50116, .T. ) ; +#67268 = EDGE_CURVE ( 'NONE', #55930, #24479, #58366, .T. ) ; +#67269 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67270 = ORIENTED_EDGE ( 'NONE', *, *, #42749, .T. ) ; +#67272 = ORIENTED_EDGE ( 'NONE', *, *, #78140, .T. ) ; +#67271 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583927800, 20.01125751638927900, -28.53740755999534400 ) ) ; +#67273 = ORIENTED_EDGE ( 'NONE', *, *, #48651, .F. ) ; +#67274 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67275 = ORIENTED_EDGE ( 'NONE', *, *, #44459, .F. ) ; +#67276 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715900, 51.25732391202397800, -28.20555803802997700 ) ) ; +#67277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67278 = PLANE ( 'NONE', #1161 ) ; +#67279 = FACE_OUTER_BOUND ( 'NONE', #54040, .T. ) ; +#67280 = EDGE_CURVE ( 'NONE', #53626, #78784, #43855, .T. ) ; +#67281 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044300, 69.08026449164336200, -28.70555803802997700 ) ) ; +#67282 = EDGE_CURVE ( 'NONE', #74584, #78782, #9471, .T. ) ; +#67283 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51272, #1538, #20317, #63853 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978470700E-007, 0.001076778502991271100 ), + .UNSPECIFIED. ) ; +#67285 = ORIENTED_EDGE ( 'NONE', *, *, #29214, .F. ) ; +#67284 = AXIS2_PLACEMENT_3D ( 'NONE', #26489, #44623, #69951 ) ; +#67286 = CIRCLE ( 'NONE', #21297, 10.50000000000009600 ) ; +#67287 = ORIENTED_EDGE ( 'NONE', *, *, #79909, .F. ) ; +#67288 = ORIENTED_EDGE ( 'NONE', *, *, #16421, .T. ) ; +#67289 = VERTEX_POINT ( 'NONE', #20755 ) ; +#67290 = ORIENTED_EDGE ( 'NONE', *, *, #32588, .F. ) ; +#67291 = VERTEX_POINT ( 'NONE', #14488 ) ; +#67292 = ORIENTED_EDGE ( 'NONE', *, *, #67991, .F. ) ; +#67293 = FACE_OUTER_BOUND ( 'NONE', #74920, .T. ) ; +#67294 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 48.33333333333334300, 5.722645192245503900 ) ) ; +#67295 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67296 = AXIS2_PLACEMENT_3D ( 'NONE', #16141, #72186, #28701 ) ; +#67297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80090, #73847, #49039, #11830 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405670729561600E-007, 0.0007670610367941752200 ), + .UNSPECIFIED. ) ; +#67298 = EDGE_CURVE ( 'NONE', #26714, #36198, #36718, .T. ) ; +#67299 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099022400, 39.06267502090536700, -28.41043597897460400 ) ) ; +#67300 = EDGE_CURVE ( 'NONE', #36688, #26822, #40626, .T. ) ; +#67301 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67302 = EDGE_CURVE ( 'NONE', #70595, #61057, #29494, .T. ) ; +#67303 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#67304 = ADVANCED_FACE ( 'NONE', ( #22146 ), #63998, .F. ) ; +#67305 = ORIENTED_EDGE ( 'NONE', *, *, #45669, .F. ) ; +#67306 = AXIS2_PLACEMENT_3D ( 'NONE', #18316, #61858, #24580 ) ; +#67307 = CIRCLE ( 'NONE', #38838, 10.00000000000009200 ) ; +#67308 = VERTEX_POINT ( 'NONE', #52256 ) ; +#67309 = EDGE_CURVE ( 'NONE', #14016, #43972, #80525, .T. ) ; +#67310 = ADVANCED_FACE ( 'NONE', ( #16293 ), #14332, .T. ) ; +#67311 = AXIS2_PLACEMENT_3D ( 'NONE', #12444, #18689, #49644 ) ; +#67312 = AXIS2_PLACEMENT_3D ( 'NONE', #16490, #60015, #22740 ) ; +#67313 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 75.80000000000001100, -28.70555803802997700 ) ) ; +#67314 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8893, #2641, #21190, #52410 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704003968700 ), + .UNSPECIFIED. ) ; +#67315 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428612000, 39.07141756547895300, -28.70555803802995200 ) ) ; +#67316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67317 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67318 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 19.66666666666667900, -6.705558038030000400 ) ) ; +#67319 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.43250300240228500, -28.20555803802997700 ) ) ; +#67320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67321 = ADVANCED_FACE ( 'NONE', ( #51270 ), #62035, .T. ) ; +#67322 = ORIENTED_EDGE ( 'NONE', *, *, #47693, .F. ) ; +#67323 = ORIENTED_EDGE ( 'NONE', *, *, #33415, .F. ) ; +#67324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67327 = EDGE_LOOP ( 'NONE', ( #21212, #9015, #42744, #71907, #62003 ) ) ; +#67326 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 31.18929190448939400, -28.20555803802996700 ) ) ; +#67328 = AXIS2_PLACEMENT_3D ( 'NONE', #37122, #80664, #43381 ) ; +#67329 = ADVANCED_FACE ( 'NONE', ( #49331 ), #28988, .F. ) ; +#67330 = CONICAL_SURFACE ( 'NONE', #79922, 10.00000000000009400, 0.7853981633974447300 ) ; +#67331 = ORIENTED_EDGE ( 'NONE', *, *, #23237, .T. ) ; +#67332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67333 = ORIENTED_EDGE ( 'NONE', *, *, #34017, .T. ) ; +#67334 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 54.16666666666666400, -2.545304000185620600 ) ) ; +#67335 = CARTESIAN_POINT ( 'NONE', ( 15.47391100912209100, 9.052177981755825400, -28.66053837059378400 ) ) ; +#67337 = EDGE_CURVE ( 'NONE', #38217, #37598, #14984, .T. ) ; +#67336 = EDGE_LOOP ( 'NONE', ( #9450, #20685, #15645, #50277 ) ) ; +#67338 = CIRCLE ( 'NONE', #16668, 9.499999999999964500 ) ; +#67339 = VERTEX_POINT ( 'NONE', #65093 ) ; +#67340 = AXIS2_PLACEMENT_3D ( 'NONE', #24954, #55942, #43427 ) ; +#67341 = ORIENTED_EDGE ( 'NONE', *, *, #12895, .T. ) ; +#67342 = ORIENTED_EDGE ( 'NONE', *, *, #34048, .T. ) ; +#67343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67344 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#67345 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148608800, 25.50238095238080800, -28.70555803802994200 ) ) ; +#67346 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#67347 = ORIENTED_EDGE ( 'NONE', *, *, #34265, .F. ) ; +#67348 = ORIENTED_EDGE ( 'NONE', *, *, #37307, .T. ) ; +#67349 = AXIS2_PLACEMENT_3D ( 'NONE', #58306, #64593, #14785 ) ; +#67350 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67351 = CONICAL_SURFACE ( 'NONE', #34321, 10.50000000000009400, 0.7853981633974500600 ) ; +#67352 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#67353 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20992, #45962, #14982, #58501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736117344500E-007, 0.0006649316450231967500 ), + .UNSPECIFIED. ) ; +#67354 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, 26.44142842854296700, -28.20555803802994200 ) ) ; +#67355 = PLANE ( 'NONE', #74575 ) ; +#67356 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846538200, 40.60079448659411100, -28.70555803802996700 ) ) ; +#67357 = EDGE_LOOP ( 'NONE', ( #47634, #20591, #62953 ) ) ; +#67358 = EDGE_LOOP ( 'NONE', ( #33549, #33055, #64178 ) ) ; +#67359 = CIRCLE ( 'NONE', #46757, 9.500000000000095900 ) ; +#67360 = AXIS2_PLACEMENT_3D ( 'NONE', #76442, #20437, #32930 ) ; +#67361 = EDGE_LOOP ( 'NONE', ( #42899, #58441, #64277, #53385, #41554 ) ) ; +#67362 = EDGE_LOOP ( 'NONE', ( #43579, #64246, #42482, #30399 ) ) ; +#67363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67364 = ORIENTED_EDGE ( 'NONE', *, *, #70373, .T. ) ; +#67365 = ORIENTED_EDGE ( 'NONE', *, *, #3925, .T. ) ; +#67366 = VERTEX_POINT ( 'NONE', #52808 ) ; +#67367 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.62753447840926700, -28.38801640354892800 ) ) ; +#67368 = CONICAL_SURFACE ( 'NONE', #34607, 10.50000000000009600, 0.7853981633974518300 ) ; +#67369 = ORIENTED_EDGE ( 'NONE', *, *, #23803, .T. ) ; +#67370 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 63.65857157145693200, -28.20555803802997700 ) ) ; +#67371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67372 = CIRCLE ( 'NONE', #15395, 10.00000000000009200 ) ; +#67373 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999551900, 81.61077422949651300, -28.37255355648645100 ) ) ; +#67374 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67375 = CARTESIAN_POINT ( 'NONE', ( 3.371507771243951600, 81.43250300240229900, -28.25053031809460100 ) ) ; +#67376 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#67377 = ORIENTED_EDGE ( 'NONE', *, *, #59923, .F. ) ; +#67378 = EDGE_CURVE ( 'NONE', #42022, #6689, #45419, .T. ) ; +#67379 = CIRCLE ( 'NONE', #5993, 10.50000000000009900 ) ; +#67380 = EDGE_LOOP ( 'NONE', ( #68612, #528, #63325, #58128 ) ) ; +#67381 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 60.50000000000001400, 6.847000845227646500 ) ) ; +#67382 = EDGE_CURVE ( 'NONE', #33714, #26239, #30887, .T. ) ; +#67383 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459497600, 62.51973550835651800, -28.70555803803009800 ) ) ; +#67384 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 25.66666666666667500, -5.535685056952199400 ) ) ; +#67385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56438, #19187, #75212, #37927 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387925235400E-007, 0.0007987676590766496200 ), + .UNSPECIFIED. ) ; +#67386 = EDGE_CURVE ( 'NONE', #15394, #29074, #502, .T. ) ; +#67387 = CARTESIAN_POINT ( 'NONE', ( -3.839550451718942300, 70.46231468379672000, -28.37082013777818200 ) ) ; +#67388 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828120700, 51.13768531620315400, -28.37082013777833100 ) ) ; +#67389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67390 = EDGE_CURVE ( 'NONE', #31605, #56481, #66855, .T. ) ; +#67391 = EDGE_CURVE ( 'NONE', #49759, #52833, #47387, .T. ) ; +#67392 = CARTESIAN_POINT ( 'NONE', ( 16.02235059838247700, 50.55000000000000400, -28.65316072681825700 ) ) ; +#67393 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 28.00000000000001400, 9.794441961969996100 ) ) ; +#67394 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70674, #39668, #58436, #21200 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.307502868906023600E-016, 0.001179148174663247500 ), + .UNSPECIFIED. ) ; +#67395 = EDGE_LOOP ( 'NONE', ( #77149, #40560, #79956 ) ) ; +#67396 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 55.79999999999999000, -28.20555803802997700 ) ) ; +#67397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67398 = ORIENTED_EDGE ( 'NONE', *, *, #7900, .F. ) ; +#67399 = AXIS2_PLACEMENT_3D ( 'NONE', #9045, #52573, #15344 ) ; +#67400 = EDGE_CURVE ( 'NONE', #30155, #18312, #52339, .T. ) ; +#67401 = CARTESIAN_POINT ( 'NONE', ( -6.356849737073848600, 9.797591630864086900, -28.70350937758197000 ) ) ; +#67402 = EDGE_CURVE ( 'NONE', #5954, #26948, #78593, .T. ) ; +#67403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67404 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939081100, 44.91466791010194000, -28.53910738522644800 ) ) ; +#67405 = EDGE_CURVE ( 'NONE', #48589, #78784, #32814, .T. ) ; +#67406 = ORIENTED_EDGE ( 'NONE', *, *, #72915, .F. ) ; +#67407 = CARTESIAN_POINT ( 'NONE', ( 10.49999999998612300, 80.90050506339281400, -28.70555803803030800 ) ) ; +#67408 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67409 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428627600, 39.07141756547895300, -28.70555803802995200 ) ) ; +#67410 = CIRCLE ( 'NONE', #7932, 10.50000000000009600 ) ; +#67411 = EDGE_LOOP ( 'NONE', ( #11880, #76701, #25065, #15155 ) ) ; +#67412 = CIRCLE ( 'NONE', #71744, 9.500000000000099500 ) ; +#67413 = EDGE_LOOP ( 'NONE', ( #42317, #36884, #35165, #17021 ) ) ; +#67414 = AXIS2_PLACEMENT_3D ( 'NONE', #12692, #56162, #18916 ) ; +#67415 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#67416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67417 = CYLINDRICAL_SURFACE ( 'NONE', #21020, 10.00000000000000200 ) ; +#67418 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67420 = ORIENTED_EDGE ( 'NONE', *, *, #39021, .T. ) ; +#67421 = CARTESIAN_POINT ( 'NONE', ( 10.93543899802699400, 81.50961459723727400, -28.29483879644671900 ) ) ; +#67422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67423 = ORIENTED_EDGE ( 'NONE', *, *, #37455, .F. ) ; +#67424 = CARTESIAN_POINT ( 'NONE', ( 15.24268566510272600, 9.878657167448636800, -28.70261278770272600 ) ) ; +#67425 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#67426 = ADVANCED_FACE ( 'NONE', ( #76597 ), #74668, .F. ) ; +#67427 = AXIS2_PLACEMENT_3D ( 'NONE', #34065, #65092, #71317 ) ; +#67428 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#67429 = ORIENTED_EDGE ( 'NONE', *, *, #66228, .T. ) ; +#67430 = AXIS2_PLACEMENT_3D ( 'NONE', #4536, #10800, #41781 ) ; +#67431 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507573900, 28.07379779496243400, -28.70555803802994200 ) ) ; +#67432 = AXIS2_PLACEMENT_3D ( 'NONE', #19132, #25419, #24867 ) ; +#67433 = CONICAL_SURFACE ( 'NONE', #26481, 10.50000000000009600, 0.7853981633974518300 ) ; +#67434 = ADVANCED_FACE ( 'NONE', ( #60091 ), #41568, .T. ) ; +#67435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67436 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416078800, 50.08874248361072300, -28.53740755999536900 ) ) ; +#67437 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 70.34267608797603100, -28.20555803802997700 ) ) ; +#67438 = VERTEX_POINT ( 'NONE', #17689 ) ; +#67439 = CIRCLE ( 'NONE', #58220, 9.500000000000131500 ) ; +#67440 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 31.50000000000001400, -7.061964498581016200 ) ) ; +#67441 = VERTEX_POINT ( 'NONE', #61218 ) ; +#67442 = CARTESIAN_POINT ( 'NONE', ( -4.766907343690179200, 75.80000000000001100, -28.70555803802997700 ) ) ; +#67443 = CARTESIAN_POINT ( 'NONE', ( 2.553492182972604100, 59.37488905616162800, -28.55192314908414600 ) ) ; +#67444 = VERTEX_POINT ( 'NONE', #23947 ) ; +#67445 = ORIENTED_EDGE ( 'NONE', *, *, #4894, .F. ) ; +#67446 = CONICAL_SURFACE ( 'NONE', #51698, 10.50000000000009600, 0.7853981633974518300 ) ; +#67447 = ORIENTED_EDGE ( 'NONE', *, *, #27376, .F. ) ; +#67448 = FACE_OUTER_BOUND ( 'NONE', #75898, .T. ) ; +#67449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67450 = AXIS2_PLACEMENT_3D ( 'NONE', #65658, #15864, #34645 ) ; +#67451 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042487000, 48.50972971738993800, -28.70555803802998800 ) ) ; +#67452 = CARTESIAN_POINT ( 'NONE', ( 6.586766506700582700, 57.15000000000002000, -7.254012119170502300 ) ) ; +#67453 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43894, #397, #56431, #19182 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249095000, 0.0008027336008645225500 ), + .UNSPECIFIED. ) ; +#67454 = ORIENTED_EDGE ( 'NONE', *, *, #79450, .T. ) ; +#67455 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67456 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#67457 = CARTESIAN_POINT ( 'NONE', ( 3.985743576842140100, 51.58004100757897700, -28.24987021275292800 ) ) ; +#67458 = CARTESIAN_POINT ( 'NONE', ( 10.63950292779733600, 9.932503002402294000, -28.25438406275900500 ) ) ; +#67459 = CONICAL_SURFACE ( 'NONE', #78935, 10.50000000000009800, 0.7853981633974500600 ) ; +#67460 = ORIENTED_EDGE ( 'NONE', *, *, #29659, .F. ) ; +#67461 = EDGE_CURVE ( 'NONE', #17804, #74194, #65943, .T. ) ; +#67462 = CONICAL_SURFACE ( 'NONE', #6530, 10.00000000000009200, 0.7853981633974447300 ) ; +#67463 = AXIS2_PLACEMENT_3D ( 'NONE', #1924, #51943, #8440 ) ; +#67464 = CARTESIAN_POINT ( 'NONE', ( -17.36059854261445400, 18.16749699759768800, -28.25434854811486900 ) ) ; +#67465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#67466 = AXIS2_PLACEMENT_3D ( 'NONE', #65218, #34173, #21680 ) ; +#67467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67468 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 79.94924284854654700, -28.20555803803014400 ) ) ; +#67469 = ORIENTED_EDGE ( 'NONE', *, *, #44712, .F. ) ; +#67470 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 2.081668171172168200E-014, -1.205558038030002800 ) ) ; +#67471 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50373, #31935, #50652, #13457 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649413278800E-007, 0.0007596411030280925900 ), + .UNSPECIFIED. ) ; +#67472 = AXIS2_PLACEMENT_3D ( 'NONE', #3304, #46814, #9569 ) ; +#67473 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155500800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#67474 = ORIENTED_EDGE ( 'NONE', *, *, #59280, .F. ) ; +#67475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67476 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 40.16666666666668600, 0.9380355014189834000 ) ) ; +#67477 = CONICAL_SURFACE ( 'NONE', #35027, 10.00000000000009400, 0.7853981633974447300 ) ; +#67478 = ORIENTED_EDGE ( 'NONE', *, *, #28645, .T. ) ; +#67479 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67480 = FACE_OUTER_BOUND ( 'NONE', #36048, .T. ) ; +#67481 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67483 = EDGE_CURVE ( 'NONE', #50540, #5379, #12398, .T. ) ; +#67482 = ORIENTED_EDGE ( 'NONE', *, *, #54135, .F. ) ; +#67484 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348848200, 61.99560977511615800, -28.70555803803030800 ) ) ; +#67485 = CIRCLE ( 'NONE', #606, 9.500000000000095900 ) ; +#67486 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 5.333333333333342800, -5.205558038030008400 ) ) ; +#67487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42368, #5118, #23909, #67407 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720891787000 ), + .UNSPECIFIED. ) ; +#67488 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999626100, 64.13556610137278800, -28.54207364681969100 ) ) ; +#67489 = EDGE_LOOP ( 'NONE', ( #581, #21944, #78460, #48592, #76537 ) ) ; +#67490 = ORIENTED_EDGE ( 'NONE', *, *, #22357, .F. ) ; +#67491 = CARTESIAN_POINT ( 'NONE', ( 10.35713406050762100, 31.52620220503713000, -28.70555803802995200 ) ) ; +#67492 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 66.13383585008107000, -28.37247596307125300 ) ) ; +#67493 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#67494 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 96.59999999999999400, 8.794441961969989000 ) ) ; +#67495 = ADVANCED_FACE ( 'NONE', ( #43492 ), #56145, .T. ) ; +#67496 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752679800, 62.08770193146246900, -28.47147304844869400 ) ) ; +#67498 = CONICAL_SURFACE ( 'NONE', #80053, 10.00000000000009400, 0.7853981633974447300 ) ; +#67497 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#67499 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035084100, 49.73507838941434800, -28.27580420063967600 ) ) ; +#67500 = ORIENTED_EDGE ( 'NONE', *, *, #5803, .T. ) ; +#67501 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#67502 = EDGE_CURVE ( 'NONE', #62283, #55309, #72734, .T. ) ; +#67503 = CONICAL_SURFACE ( 'NONE', #18565, 10.00000000000009600, 0.7853981633974447300 ) ; +#67504 = EDGE_CURVE ( 'NONE', #65965, #10425, #26998, .T. ) ; +#67505 = VERTEX_POINT ( 'NONE', #73985 ) ; +#67506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67507 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656715200, 39.35339758437810800, -28.20555803802995200 ) ) ; +#67508 = ORIENTED_EDGE ( 'NONE', *, *, #28003, .T. ) ; +#67509 = CARTESIAN_POINT ( 'NONE', ( 15.43166316811159400, 84.54539096019127000, -28.69802137271993600 ) ) ; +#67510 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#67511 = EDGE_LOOP ( 'NONE', ( #68348, #8777, #72228 ) ) ; +#67512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67514 = ORIENTED_EDGE ( 'NONE', *, *, #8499, .T. ) ; +#67515 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67516 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#67517 = ADVANCED_FACE ( 'NONE', ( #10438 ), #70751, .F. ) ; +#67518 = CONICAL_SURFACE ( 'NONE', #51195, 10.00000000000009400, 0.7853981633974447300 ) ; +#67519 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67520 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 80.16054007504463600, -28.34042301926880800 ) ) ; +#67521 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515427000, 60.58127875436078100, -28.53757464917570300 ) ) ; +#67522 = AXIS2_PLACEMENT_3D ( 'NONE', #80349, #61614, #43071 ) ; +#67523 = ORIENTED_EDGE ( 'NONE', *, *, #39361, .F. ) ; +#67524 = EDGE_CURVE ( 'NONE', #31487, #41523, #37891, .T. ) ; +#67525 = CARTESIAN_POINT ( 'NONE', ( -10.75693756550920100, 61.43482212736793700, -28.29548618595819700 ) ) ; +#67526 = EDGE_CURVE ( 'NONE', #23113, #25204, #23463, .T. ) ; +#67527 = EDGE_CURVE ( 'NONE', #20096, #43518, #8961, .T. ) ; +#67528 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14629, #27146, #45863, #8609 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584772800, 0.0006651184466334739400 ), + .UNSPECIFIED. ) ; +#67529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67530 = ORIENTED_EDGE ( 'NONE', *, *, #80505, .F. ) ; +#67531 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, -1.205558038030003500 ) ) ; +#67532 = EDGE_CURVE ( 'NONE', #26934, #44625, #75318, .T. ) ; +#67533 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#67534 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#67535 = AXIS2_PLACEMENT_3D ( 'NONE', #4875, #23389, #35894 ) ; +#67536 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67537 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 75.79999999999999700, -28.20555803802997700 ) ) ; +#67538 = ORIENTED_EDGE ( 'NONE', *, *, #13260, .F. ) ; +#67539 = CIRCLE ( 'NONE', #40362, 10.00000000000009400 ) ; +#67540 = CARTESIAN_POINT ( 'NONE', ( 11.44650781702742700, 89.37488905616106600, -28.55192314908466100 ) ) ; +#67541 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 68.17143691309414100, -28.36981695106784300 ) ) ; +#67542 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67543 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67544 = AXIS2_PLACEMENT_3D ( 'NONE', #61702, #74210, #30430 ) ; +#67545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67546 = AXIS2_PLACEMENT_3D ( 'NONE', #29898, #73383, #36112 ) ; +#67547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67549 = ADVANCED_FACE ( 'NONE', ( #25029 ), #37631, .T. ) ; +#67550 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56757, #50466, #6976, #63037 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794188003900E-007, 0.0009376791149930469500 ), + .UNSPECIFIED. ) ; +#67551 = CONICAL_SURFACE ( 'NONE', #50763, 10.50000000000009600, 0.7853981633974518300 ) ; +#67552 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894334700, 35.05000000000000400, -28.70555803802995200 ) ) ; +#67553 = ORIENTED_EDGE ( 'NONE', *, *, #45032, .F. ) ; +#67554 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 46.16666666666668600, -9.205558038030003900 ) ) ; +#67555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67556 = AXIS2_PLACEMENT_3D ( 'NONE', #8429, #51928, #14707 ) ; +#67557 = EDGE_CURVE ( 'NONE', #67776, #73683, #60878, .T. ) ; +#67558 = ORIENTED_EDGE ( 'NONE', *, *, #53320, .F. ) ; +#67559 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67560 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629500, 50.79999999999999000, -28.55171188418376700 ) ) ; +#67561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67562 = ORIENTED_EDGE ( 'NONE', *, *, #51963, .F. ) ; +#67563 = CONICAL_SURFACE ( 'NONE', #43778, 10.50000000000009800, 0.7853981633974518300 ) ; +#67564 = EDGE_LOOP ( 'NONE', ( #23180, #48817, #50919 ) ) ; +#67565 = FACE_OUTER_BOUND ( 'NONE', #78992, .T. ) ; +#67566 = EDGE_LOOP ( 'NONE', ( #30597, #73111, #54531, #10912 ) ) ; +#67567 = CARTESIAN_POINT ( 'NONE', ( -10.36049707220280100, 30.93250300240228900, -28.25438406275898700 ) ) ; +#67568 = EDGE_CURVE ( 'NONE', #9298, #9849, #46342, .T. ) ; +#67569 = ORIENTED_EDGE ( 'NONE', *, *, #65990, .T. ) ; +#67570 = FACE_OUTER_BOUND ( 'NONE', #37660, .T. ) ; +#67571 = FACE_OUTER_BOUND ( 'NONE', #18740, .T. ) ; +#67572 = AXIS2_PLACEMENT_3D ( 'NONE', #18030, #24294, #55273 ) ; +#67573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68802, #44008, #62834, #25574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345015300, 0.0008131256040089807900 ), + .UNSPECIFIED. ) ; +#67574 = ORIENTED_EDGE ( 'NONE', *, *, #35487, .F. ) ; +#67575 = ORIENTED_EDGE ( 'NONE', *, *, #61698, .T. ) ; +#67576 = ORIENTED_EDGE ( 'NONE', *, *, #70939, .F. ) ; +#67577 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67578 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67579 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#67580 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#67581 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 17.50000000000001100, 6.847000845227641200 ) ) ; +#67582 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#67583 = FACE_OUTER_BOUND ( 'NONE', #2879, .T. ) ; +#67584 = EDGE_LOOP ( 'NONE', ( #2764, #15390, #5478 ) ) ; +#67585 = AXIS2_PLACEMENT_3D ( 'NONE', #20894, #64437, #27150 ) ; +#67586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67587 = CIRCLE ( 'NONE', #27396, 9.500000000000101300 ) ; +#67588 = VERTEX_POINT ( 'NONE', #18997 ) ; +#67589 = ORIENTED_EDGE ( 'NONE', *, *, #58551, .F. ) ; +#67590 = ORIENTED_EDGE ( 'NONE', *, *, #5674, .F. ) ; +#67591 = ORIENTED_EDGE ( 'NONE', *, *, #36637, .F. ) ; +#67592 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67593 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#67594 = VERTEX_POINT ( 'NONE', #31538 ) ; +#67595 = CIRCLE ( 'NONE', #68406, 9.500000000000099500 ) ; +#67596 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819198200, 61.65075715145310700, -28.20555803802997700 ) ) ; +#67597 = AXIS2_PLACEMENT_3D ( 'NONE', #64427, #14355, #20888 ) ; +#67598 = VERTEX_POINT ( 'NONE', #37750 ) ; +#67599 = ADVANCED_FACE ( 'NONE', ( #54205 ), #4572, .T. ) ; +#67600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67601 = EDGE_LOOP ( 'NONE', ( #18699, #62922, #51794, #26490 ) ) ; +#67602 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000012400, 49.00000000000002100, -1.205558038030006400 ) ) ; +#67603 = ORIENTED_EDGE ( 'NONE', *, *, #16175, .T. ) ; +#67604 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#67605 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725668400, 22.66464174796073300, -28.53896444442198900 ) ) ; +#67606 = EDGE_CURVE ( 'NONE', #6811, #46133, #31936, .T. ) ; +#67607 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 52.00000000000000000, -1.205558038030002800 ) ) ; +#67608 = EDGE_LOOP ( 'NONE', ( #33320, #44771, #62979 ) ) ; +#67609 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#67610 = ORIENTED_EDGE ( 'NONE', *, *, #61114, .F. ) ; +#67611 = FACE_OUTER_BOUND ( 'NONE', #35839, .T. ) ; +#67612 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344327800, 20.67701665379242500, -28.20555803802994200 ) ) ; +#67613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67614 = CARTESIAN_POINT ( 'NONE', ( 3.568292696511819400, 79.60439022488354500, -28.70555803803030800 ) ) ; +#67615 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67616 = ADVANCED_FACE ( 'NONE', ( #6524 ), #52223, .T. ) ; +#67617 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#67618 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#67619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67621 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819190700, 89.94924284854670300, -28.20555803802997700 ) ) ; +#67622 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52703, #21993, #65541, #28290 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646494600, 0.0009605145132142267400 ), + .UNSPECIFIED. ) ; +#67623 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67625 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 18.37705528805141600, -28.20555803802992800 ) ) ; +#67626 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507583700, 17.57379779496243800, -28.70555803802992800 ) ) ; +#67627 = EDGE_CURVE ( 'NONE', #44639, #78359, #68805, .T. ) ; +#67628 = CIRCLE ( 'NONE', #31946, 10.00000000000009400 ) ; +#67629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67630 = ADVANCED_FACE ( 'NONE', ( #39607 ), #2595, .T. ) ; +#67631 = EDGE_CURVE ( 'NONE', #52508, #561, #19167, .T. ) ; +#67632 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 20.67701665379184600, -28.20555803802994200 ) ) ; +#67633 = ORIENTED_EDGE ( 'NONE', *, *, #17824, .T. ) ; +#67634 = VERTEX_POINT ( 'NONE', #19555 ) ; +#67635 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 9.940690926013784800, -28.35186440610855700 ) ) ; +#67636 = FACE_OUTER_BOUND ( 'NONE', #80709, .T. ) ; +#67637 = AXIS2_PLACEMENT_3D ( 'NONE', #62024, #24744, #68256 ) ; +#67638 = CARTESIAN_POINT ( 'NONE', ( 2.808476898877865700, 29.07332680091208100, -28.37233769390153900 ) ) ; +#67639 = EDGE_CURVE ( 'NONE', #24328, #51967, #8449, .T. ) ; +#67641 = VERTEX_POINT ( 'NONE', #63077 ) ; +#67640 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 70.36203212531316400, -28.38801640354855800 ) ) ; +#67642 = ADVANCED_FACE ( 'NONE', ( #35727 ), #17226, .F. ) ; +#67643 = EDGE_CURVE ( 'NONE', #26822, #70776, #33765, .T. ) ; +#67644 = CONICAL_SURFACE ( 'NONE', #60989, 10.00000000000009200, 0.7853981633974447300 ) ; +#67645 = AXIS2_PLACEMENT_3D ( 'NONE', #39259, #76528, #45487 ) ; +#67646 = CONICAL_SURFACE ( 'NONE', #14775, 10.00000000000009200, 0.7853981633974447300 ) ; +#67647 = VERTEX_POINT ( 'NONE', #38536 ) ; +#67648 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67649 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 58.33333333333334300, -6.705558038030005700 ) ) ; +#67650 = FACE_OUTER_BOUND ( 'NONE', #3291, .T. ) ; +#67651 = ORIENTED_EDGE ( 'NONE', *, *, #54148, .F. ) ; +#67652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67653 = ORIENTED_EDGE ( 'NONE', *, *, #67839, .F. ) ; +#67654 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 23.50000000000001100, 2.454695999814385600 ) ) ; +#67655 = AXIS2_PLACEMENT_3D ( 'NONE', #39912, #76624, #2621 ) ; +#67656 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 53.65857157145681800, -28.20555803803047800 ) ) ; +#67657 = EDGE_CURVE ( 'NONE', #33093, #69885, #17480, .T. ) ; +#67658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67659 = EDGE_CURVE ( 'NONE', #50311, #67634, #2991, .T. ) ; +#67660 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#67662 = CONICAL_SURFACE ( 'NONE', #37726, 10.50000000000009600, 0.7853981633974500600 ) ; +#67661 = AXIS2_PLACEMENT_3D ( 'NONE', #38691, #1449, #44932 ) ; +#67663 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820190600, 49.58258585630880300, -28.27509349209129800 ) ) ; +#67664 = ORIENTED_EDGE ( 'NONE', *, *, #39239, .T. ) ; +#67665 = CIRCLE ( 'NONE', #52860, 10.00000000000009200 ) ; +#67666 = ORIENTED_EDGE ( 'NONE', *, *, #66680, .F. ) ; +#67667 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67668 = EDGE_LOOP ( 'NONE', ( #22126, #37410, #42205 ) ) ; +#67669 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 25.83333333333333900, -12.20555803803000600 ) ) ; +#67670 = CARTESIAN_POINT ( 'NONE', ( 2.653846153846314900, 70.79999999999998300, -28.55171188418376000 ) ) ; +#67671 = ORIENTED_EDGE ( 'NONE', *, *, #80069, .F. ) ; +#67672 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3837, #41113, #78403, #47330 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859863398300E-007, 0.0008759659331884803000 ), + .UNSPECIFIED. ) ; +#67673 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034485600, 10.17701665379206900, -28.20555803803018300 ) ) ; +#67674 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67675 = VERTEX_POINT ( 'NONE', #45043 ) ; +#67676 = EDGE_CURVE ( 'NONE', #9685, #30178, #23087, .T. ) ; +#67677 = FACE_OUTER_BOUND ( 'NONE', #58905, .T. ) ; +#67678 = AXIS2_PLACEMENT_3D ( 'NONE', #6314, #12323, #43551 ) ; +#67679 = ORIENTED_EDGE ( 'NONE', *, *, #25841, .F. ) ; +#67680 = AXIS2_PLACEMENT_3D ( 'NONE', #22475, #78522, #34724 ) ; +#67681 = EDGE_LOOP ( 'NONE', ( #7012, #1952, #36645, #35069 ) ) ; +#67682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#67684 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 80.10230989102912200, -28.61774594594330900 ) ) ; +#67685 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67686 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67687 = VERTEX_POINT ( 'NONE', #7814 ) ; +#67688 = ORIENTED_EDGE ( 'NONE', *, *, #34531, .F. ) ; +#67689 = CONICAL_SURFACE ( 'NONE', #11801, 10.00000000000009600, 0.7853981633974447300 ) ; +#67690 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67691 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67692 = ORIENTED_EDGE ( 'NONE', *, *, #74069, .F. ) ; +#67693 = CIRCLE ( 'NONE', #24655, 10.00000000000009600 ) ; +#67694 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67695 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123095700, 39.78860447109615000, -28.53900456328626900 ) ) ; +#67696 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 30.93250300240228900, -28.20555803802996700 ) ) ; +#67697 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67698 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#67699 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265432100, 90.27440177985785400, -28.29986836858059400 ) ) ; +#67700 = ADVANCED_FACE ( 'NONE', ( #66870 ), #14098, .T. ) ; +#67701 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#67702 = AXIS2_PLACEMENT_3D ( 'NONE', #40591, #9305, #77867 ) ; +#67703 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 29.33333333333333600, 5.722645192245503900 ) ) ; +#67704 = FACE_OUTER_BOUND ( 'NONE', #45130, .T. ) ; +#67705 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#67706 = EDGE_LOOP ( 'NONE', ( #72902, #150, #34514 ) ) ; +#67707 = ORIENTED_EDGE ( 'NONE', *, *, #77290, .F. ) ; +#67708 = CIRCLE ( 'NONE', #30676, 10.00000000000009600 ) ; +#67709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67710 = ADVANCED_FACE ( 'NONE', ( #21140 ), #15274, .T. ) ; +#67711 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 18.69949493661175300, -28.70555803802992800 ) ) ; +#67712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67714 = CARTESIAN_POINT ( 'NONE', ( 7.884892203504701800, 57.14999999999961500, -3.167542434102783600 ) ) ; +#67715 = VERTEX_POINT ( 'NONE', #51580 ) ; +#67716 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67717 = EDGE_CURVE ( 'NONE', #58931, #71276, #31832, .T. ) ; +#67718 = PLANE ( 'NONE', #2732 ) ; +#67719 = FACE_OUTER_BOUND ( 'NONE', #47505, .T. ) ; +#67720 = FACE_OUTER_BOUND ( 'NONE', #4365, .T. ) ; +#67721 = AXIS2_PLACEMENT_3D ( 'NONE', #5801, #43034, #42776 ) ; +#67722 = ORIENTED_EDGE ( 'NONE', *, *, #22233, .T. ) ; +#67723 = CARTESIAN_POINT ( 'NONE', ( 5.060928057032967300, 10.00000000000003700, -28.70555803802998100 ) ) ; +#67724 = ADVANCED_FACE ( 'NONE', ( #50272 ), #46356, .F. ) ; +#67725 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56318, #12838, #75106, #37811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004084100 ), + .UNSPECIFIED. ) ; +#67726 = FACE_OUTER_BOUND ( 'NONE', #44318, .T. ) ; +#67727 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 49.31066373133501200, -28.53923937255171200 ) ) ; +#67729 = ORIENTED_EDGE ( 'NONE', *, *, #56931, .T. ) ; +#67728 = CARTESIAN_POINT ( 'NONE', ( 4.035920356936736100, 20.59789380924896900, -28.25343951603328200 ) ) ; +#67730 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3727, #41009, #16268, #59789 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207918752900E-007, 0.0008724366121409682100 ), + .UNSPECIFIED. ) ; +#67731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67732 = ORIENTED_EDGE ( 'NONE', *, *, #63625, .F. ) ; +#67733 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#67734 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#67735 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999640300, 74.37738371066734500, -28.70555803803030800 ) ) ; +#67736 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 39.15930907398620100, -28.35186440610857200 ) ) ; +#67737 = CIRCLE ( 'NONE', #50337, 10.00000000000009600 ) ; +#67738 = ADVANCED_FACE ( 'NONE', ( #79518 ), #13336, .T. ) ; +#67739 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49161, #5416, #18190, #61729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736069583400E-007, 0.0009376786059871924500 ), + .UNSPECIFIED. ) ; +#67740 = CIRCLE ( 'NONE', #29942, 9.500000000000095900 ) ; +#67741 = EDGE_LOOP ( 'NONE', ( #62643, #23162, #65734, #4209 ) ) ; +#67742 = EDGE_CURVE ( 'NONE', #66272, #69152, #69322, .T. ) ; +#67743 = ORIENTED_EDGE ( 'NONE', *, *, #41993, .F. ) ; +#67744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67745 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .F. ) ; +#67746 = EDGE_CURVE ( 'NONE', #18527, #65515, #58111, .T. ) ; +#67747 = ORIENTED_EDGE ( 'NONE', *, *, #5452, .T. ) ; +#67748 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67749 = CONICAL_SURFACE ( 'NONE', #45339, 10.00000000000009400, 0.7853981633974447300 ) ; +#67750 = FACE_OUTER_BOUND ( 'NONE', #7138, .T. ) ; +#67751 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, -2.166666666666672300, 0.1341879241256075400 ) ) ; +#67752 = ORIENTED_EDGE ( 'NONE', *, *, #41564, .F. ) ; +#67753 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74041, #61272, #5748, #49231 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465388066200E-007, 0.0004435563144342825500 ), + .UNSPECIFIED. ) ; +#67754 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#67755 = EDGE_CURVE ( 'NONE', #6790, #80318, #29910, .T. ) ; +#67756 = CARTESIAN_POINT ( 'NONE', ( 10.22115791441229900, 9.935236322205879500, -28.30315276798563700 ) ) ; +#67757 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 38.00000000000000700, -1.205558038030005300 ) ) ; +#67758 = EDGE_CURVE ( 'NONE', #54124, #30232, #54857, .T. ) ; +#67759 = CIRCLE ( 'NONE', #24770, 10.00000000000009400 ) ; +#67760 = AXIS2_PLACEMENT_3D ( 'NONE', #11114, #54610, #17360 ) ; +#67762 = EDGE_LOOP ( 'NONE', ( #28426, #8314, #17889, #19596, #14424, #19640 ) ) ; +#67761 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566696000, 35.05000000000001100, -28.70555803802995200 ) ) ; +#67763 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67764 = ORIENTED_EDGE ( 'NONE', *, *, #12363, .F. ) ; +#67765 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428127100, 61.52858243452097000, -28.70555803803030800 ) ) ; +#67766 = CARTESIAN_POINT ( 'NONE', ( 17.40887775794659800, 41.17956007225885900, -28.41154406527801500 ) ) ; +#67767 = CIRCLE ( 'NONE', #45951, 9.500000000000099500 ) ; +#67768 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 3.166666666666684300, 0.9380355014189834000 ) ) ; +#67769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67771 = AXIS2_PLACEMENT_3D ( 'NONE', #63350, #51033, #75822 ) ; +#67772 = EDGE_CURVE ( 'NONE', #19600, #73384, #48331, .T. ) ; +#67773 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58623, #64910, #27637, #71131 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750182309100, 0.005168056621189865900 ), + .UNSPECIFIED. ) ; +#67774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67776 = VERTEX_POINT ( 'NONE', #39354 ) ; +#67775 = EDGE_CURVE ( 'NONE', #53681, #35408, #649, .T. ) ; +#67777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67778 = EDGE_CURVE ( 'NONE', #47683, #49395, #40389, .T. ) ; +#67779 = CARTESIAN_POINT ( 'NONE', ( -16.15629440873539500, 26.92044679784048700, -28.64059091698903700 ) ) ; +#67780 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67781 = AXIS2_PLACEMENT_3D ( 'NONE', #58145, #27155, #14641 ) ; +#67782 = CIRCLE ( 'NONE', #26129, 9.500000000000097700 ) ; +#67783 = ORIENTED_EDGE ( 'NONE', *, *, #1997, .F. ) ; +#67784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67785 = CIRCLE ( 'NONE', #52981, 10.50000000000009600 ) ; +#67786 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274698700, 24.54999999999999700, -28.20555803802994200 ) ) ; +#67787 = AXIS2_PLACEMENT_3D ( 'NONE', #16604, #60134, #22853 ) ; +#67788 = CARTESIAN_POINT ( 'NONE', ( -3.160449548281038200, 60.46231468379688300, -28.37082013777833100 ) ) ; +#67789 = EDGE_LOOP ( 'NONE', ( #6062, #35988, #27781 ) ) ; +#67790 = EDGE_CURVE ( 'NONE', #71807, #26685, #25963, .T. ) ; +#67792 = ORIENTED_EDGE ( 'NONE', *, *, #43779, .T. ) ; +#67791 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#67793 = CONICAL_SURFACE ( 'NONE', #53538, 10.50000000000009600, 0.7853981633974500600 ) ; +#67794 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507555000, 30.39456479767167000, -28.70555803802995200 ) ) ; +#67795 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 80.16749699759769500, -28.20555803802997700 ) ) ; +#67796 = AXIS2_PLACEMENT_3D ( 'NONE', #4391, #10661, #41639 ) ; +#67797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67798 = AXIS2_PLACEMENT_3D ( 'NONE', #55794, #18546, #62079 ) ; +#67799 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67800 = ORIENTED_EDGE ( 'NONE', *, *, #35495, .F. ) ; +#67801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67802 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#67803 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019385200, 86.79999999999783700, -28.70555803802997700 ) ) ; +#67804 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67805 = CIRCLE ( 'NONE', #53594, 10.00000000000009600 ) ; +#67806 = CYLINDRICAL_SURFACE ( 'NONE', #53261, 10.00000000000000000 ) ; +#67807 = ORIENTED_EDGE ( 'NONE', *, *, #49468, .F. ) ; +#67808 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285729500, 26.42318720225497900, -28.70555803802994200 ) ) ; +#67809 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67811 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 67.94142842854307700, -28.20555803802997700 ) ) ; +#67812 = EDGE_LOOP ( 'NONE', ( #36951, #68053, #73858, #19588 ) ) ; +#67813 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372567600, 53.66464174796075100, -28.53896444442200000 ) ) ; +#67814 = ORIENTED_EDGE ( 'NONE', *, *, #61165, .F. ) ; +#67815 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 59.97246552159072800, -28.38801640354892800 ) ) ; +#67816 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 90.13716795162659400, -28.48697406221667400 ) ) ; +#67817 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#67819 = CARTESIAN_POINT ( 'NONE', ( -9.438174915908756900, 41.48385710212515700, -28.57719681746191000 ) ) ; +#67820 = FACE_OUTER_BOUND ( 'NONE', #61185, .T. ) ; +#67821 = AXIS2_PLACEMENT_3D ( 'NONE', #6901, #50374, #13188 ) ; +#67822 = ORIENTED_EDGE ( 'NONE', *, *, #3933, .T. ) ; +#67823 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .F. ) ; +#67824 = ADVANCED_FACE ( 'NONE', ( #62970 ), #75581, .T. ) ; +#67825 = ORIENTED_EDGE ( 'NONE', *, *, #43307, .T. ) ; +#67826 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 63.65857157145704500, -28.20555803803014400 ) ) ; +#67827 = ORIENTED_EDGE ( 'NONE', *, *, #72419, .T. ) ; +#67828 = ADVANCED_FACE ( 'NONE', ( #27949 ), #42493, .F. ) ; +#67829 = CONICAL_SURFACE ( 'NONE', #12520, 10.00000000000009200, 0.7853981633974447300 ) ; +#67830 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 44.00000000000002100, 6.794441961969995200 ) ) ; +#67831 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825387800, 71.43945992495515900, -28.34042301926901400 ) ) ; +#67832 = AXIS2_PLACEMENT_3D ( 'NONE', #66175, #28949, #72436 ) ; +#67833 = VERTEX_POINT ( 'NONE', #59211 ) ; +#67834 = VERTEX_POINT ( 'NONE', #21961 ) ; +#67835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67836 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67838 = ADVANCED_FACE ( 'NONE', ( #11385 ), #9398, .T. ) ; +#67839 = EDGE_CURVE ( 'NONE', #71340, #44364, #11504, .T. ) ; +#67840 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28196, #71685, #46890, #9655 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572076749100E-007, 0.0007596410370203606500 ), + .UNSPECIFIED. ) ; +#67841 = CIRCLE ( 'NONE', #8544, 10.00000000000009600 ) ; +#67842 = AXIS2_PLACEMENT_3D ( 'NONE', #36337, #79879, #42578 ) ; +#67843 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.23237991241950300, -28.26633708900882900 ) ) ; +#67844 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .T. ) ; +#67845 = LINE ( 'NONE', #50445, #32781 ) ; +#67846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67847 = FACE_OUTER_BOUND ( 'NONE', #65807, .T. ) ; +#67848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71756, #34486, #9719, #53230 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178131411900, 0.0006016798664341615400 ), + .UNSPECIFIED. ) ; +#67849 = EDGE_LOOP ( 'NONE', ( #24760, #37970, #29260 ) ) ; +#67850 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#67851 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 43.89610994602598700, -28.37519436813180500 ) ) ; +#67852 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 15.33333333333334600, -10.73183747965883100 ) ) ; +#67853 = CARTESIAN_POINT ( 'NONE', ( 2.438065798940289000, 18.11613388835901300, -28.57723500840098700 ) ) ; +#67854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67855 = EDGE_CURVE ( 'NONE', #79395, #61816, #77800, .T. ) ; +#67856 = FACE_OUTER_BOUND ( 'NONE', #36372, .T. ) ; +#67857 = ORIENTED_EDGE ( 'NONE', *, *, #57849, .T. ) ; +#67858 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.53751622186547400, -28.32723995587591800 ) ) ; +#67860 = EDGE_CURVE ( 'NONE', #18101, #37515, #63360, .T. ) ; +#67859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14328, #20588, #76594, #39323 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635004868200E-007, 0.0004064396303281907100 ), + .UNSPECIFIED. ) ; +#67861 = VERTEX_POINT ( 'NONE', #72023 ) ; +#67862 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, -49.81214711292819400, 16.29444196196997700 ) ) ; +#67863 = ORIENTED_EDGE ( 'NONE', *, *, #5800, .T. ) ; +#67864 = CIRCLE ( 'NONE', #45624, 10.00000000000009200 ) ; +#67865 = EDGE_CURVE ( 'NONE', #56856, #64449, #48855, .T. ) ; +#67866 = ORIENTED_EDGE ( 'NONE', *, *, #21801, .F. ) ; +#67867 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35527, #72517, #41484, #79044 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352843442800E-007, 0.0007670609591620150800 ), + .UNSPECIFIED. ) ; +#67868 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537171500, 60.34267608797603800, -28.20555803802997700 ) ) ; +#67869 = EDGE_CURVE ( 'NONE', #16848, #12566, #77551, .T. ) ; +#67870 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999996400, 46.83333333333334300, -3.349151577478988200 ) ) ; +#67871 = AXIS2_PLACEMENT_3D ( 'NONE', #29826, #73311, #36036 ) ; +#67872 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 26.44142842854296700, -28.20555803802994200 ) ) ; +#67873 = FACE_OUTER_BOUND ( 'NONE', #72145, .T. ) ; +#67874 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 49.83333333333332900, 0.1341879241256075400 ) ) ; +#67875 = ORIENTED_EDGE ( 'NONE', *, *, #13686, .F. ) ; +#67876 = EDGE_CURVE ( 'NONE', #7944, #67880, #34428, .T. ) ; +#67877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67878 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474190100, 31.36172549728280500, -28.47230003642277300 ) ) ; +#67879 = CARTESIAN_POINT ( 'NONE', ( -3.242975574465504400, 70.16517473503391500, -28.29551658696704700 ) ) ; +#67880 = VERTEX_POINT ( 'NONE', #72294 ) ; +#67881 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67882 = CARTESIAN_POINT ( 'NONE', ( 3.935438998026989500, 61.50961459723740900, -28.29483879644655900 ) ) ; +#67883 = AXIS2_PLACEMENT_3D ( 'NONE', #56527, #62811, #13042 ) ; +#67884 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67885 = EDGE_CURVE ( 'NONE', #3819, #77100, #64938, .T. ) ; +#67886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67887 = EDGE_CURVE ( 'NONE', #18956, #53823, #44397, .T. ) ; +#67888 = EDGE_CURVE ( 'NONE', #14550, #67339, #19962, .T. ) ; +#67889 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145307800, 61.86801718796490900, -28.34169759783703300 ) ) ; +#67890 = CIRCLE ( 'NONE', #69795, 10.00000000000009200 ) ; +#67891 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465400, 39.10230989102910100, -28.61774594594332300 ) ) ; +#67892 = CONICAL_SURFACE ( 'NONE', #44857, 10.50000000000009600, 0.7853981633974500600 ) ; +#67893 = CARTESIAN_POINT ( 'NONE', ( -2.881082274201249800, 51.10238820582982600, -28.32098513914462100 ) ) ; +#67894 = ORIENTED_EDGE ( 'NONE', *, *, #1567, .T. ) ; +#67895 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67896 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#67897 = ORIENTED_EDGE ( 'NONE', *, *, #61828, .T. ) ; +#67898 = AXIS2_PLACEMENT_3D ( 'NONE', #34670, #47131, #71937 ) ; +#67899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67900 = ORIENTED_EDGE ( 'NONE', *, *, #38439, .T. ) ; +#67901 = VERTEX_POINT ( 'NONE', #60319 ) ; +#67902 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67903 = EDGE_LOOP ( 'NONE', ( #56650, #22799, #64235, #14495 ) ) ; +#67904 = CARTESIAN_POINT ( 'NONE', ( 16.62514415533964400, 9.187427922330183300, -28.57261973208896000 ) ) ; +#67905 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 39.15930907398620100, -28.35186440610857200 ) ) ; +#67906 = AXIS2_PLACEMENT_3D ( 'NONE', #69266, #32020, #75519 ) ; +#67907 = AXIS2_PLACEMENT_3D ( 'NONE', #26460, #69930, #32679 ) ; +#67908 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#67909 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67910 = ORIENTED_EDGE ( 'NONE', *, *, #44080, .F. ) ; +#67911 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67912 = CARTESIAN_POINT ( 'NONE', ( -17.07349184251535900, 60.22161678501182500, -28.29547179040443800 ) ) ; +#67913 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69360, #56588, #56857, #32112 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061278200E-007, 0.001119323292485673700 ), + .UNSPECIFIED. ) ; +#67914 = ADVANCED_FACE ( 'NONE', ( #25983 ), #71713, .T. ) ; +#67915 = CIRCLE ( 'NONE', #54905, 9.500000000000097700 ) ; +#67916 = ORIENTED_EDGE ( 'NONE', *, *, #35449, .F. ) ; +#67917 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.56248377813449900, -28.32723995587591800 ) ) ; +#67918 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 56.16666666666667100, 1.741883078712356500 ) ) ; +#67919 = ORIENTED_EDGE ( 'NONE', *, *, #42855, .F. ) ; +#67920 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651225500, 71.99560977511660600, -28.70555803803014400 ) ) ; +#67921 = CIRCLE ( 'NONE', #73562, 9.500000000000099500 ) ; +#67922 = ADVANCED_FACE ( 'NONE', ( #24025 ), #38562, .F. ) ; +#67923 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 21.33333333333335000, -3.705558038030004400 ) ) ; +#67924 = AXIS2_PLACEMENT_3D ( 'NONE', #13860, #57358, #20108 ) ; +#67925 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465429700, 29.49920551340398900, -28.70555803802994200 ) ) ; +#67926 = ORIENTED_EDGE ( 'NONE', *, *, #11970, .T. ) ; +#67927 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67928 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#67929 = CONICAL_SURFACE ( 'NONE', #39573, 10.50000000000009600, 0.7853981633974500600 ) ; +#67930 = ORIENTED_EDGE ( 'NONE', *, *, #74216, .T. ) ; +#67931 = EDGE_CURVE ( 'NONE', #48354, #7046, #61032, .T. ) ; +#67932 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 23.66666666666667500, 8.320721403598824400 ) ) ; +#67933 = AXIS2_PLACEMENT_3D ( 'NONE', #21204, #8649, #52153 ) ; +#67934 = ORIENTED_EDGE ( 'NONE', *, *, #19513, .T. ) ; +#67935 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#67936 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 9.932503002402294000, -28.20555803802994200 ) ) ; +#67937 = ORIENTED_EDGE ( 'NONE', *, *, #16801, .F. ) ; +#67938 = FACE_OUTER_BOUND ( 'NONE', #73918, .T. ) ; +#67939 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 60.07141756547895300, -28.70555803802997700 ) ) ; +#67940 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828107000, 80.46231468379643600, -28.37082013777820300 ) ) ; +#67941 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 0.0000000000000000000, -1.205558038030003500 ) ) ; +#67942 = ADVANCED_FACE ( 'NONE', ( #57108 ), #69733, .F. ) ; +#67943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67944 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943326400, 45.54999999999998300, -28.70555803802996700 ) ) ; +#67945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67946 = AXIS2_PLACEMENT_3D ( 'NONE', #55797, #6041, #74329 ) ; +#67947 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 20.52858243452105900, -28.70555803802995200 ) ) ; +#67948 = CONICAL_SURFACE ( 'NONE', #37959, 10.50000000000009600, 0.7853981633974500600 ) ; +#67949 = EDGE_LOOP ( 'NONE', ( #36806, #58568, #22325, #80272, #51551 ) ) ; +#67950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67951 = CARTESIAN_POINT ( 'NONE', ( 8.705837858217824600, 14.05000000000000600, -28.37136602294606600 ) ) ; +#67952 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34725, #71997, #47180, #9956 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898919500 ), + .UNSPECIFIED. ) ; +#67953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67954 = CARTESIAN_POINT ( 'NONE', ( 3.935444260775113900, 90.09037803491513300, -28.29483400905907700 ) ) ; +#67955 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67956 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670968900, 10.65863441772052800, -28.48677465922826700 ) ) ; +#67957 = ORIENTED_EDGE ( 'NONE', *, *, #45335, .T. ) ; +#67958 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#67959 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#67960 = CONICAL_SURFACE ( 'NONE', #70719, 10.50000000000009600, 0.7853981633974500600 ) ; +#67961 = CARTESIAN_POINT ( 'NONE', ( 10.77874659791492300, 28.66476742015636200, -28.30311934730015700 ) ) ; +#67962 = CONICAL_SURFACE ( 'NONE', #12043, 10.50000000000009200, 0.7853981633974482800 ) ; +#67963 = ORIENTED_EDGE ( 'NONE', *, *, #59557, .T. ) ; +#67964 = VERTEX_POINT ( 'NONE', #79335 ) ; +#67965 = EDGE_CURVE ( 'NONE', #9619, #51395, #5500, .T. ) ; +#67966 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 27.16666666666666100, -9.205558038030003900 ) ) ; +#67967 = ORIENTED_EDGE ( 'NONE', *, *, #53075, .F. ) ; +#67968 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344056900, 28.42298334620768300, -28.20555803802994200 ) ) ; +#67969 = EDGE_CURVE ( 'NONE', #52291, #56121, #71834, .T. ) ; +#67970 = ORIENTED_EDGE ( 'NONE', *, *, #7934, .F. ) ; +#67971 = VERTEX_POINT ( 'NONE', #4781 ) ; +#67972 = VERTEX_POINT ( 'NONE', #73346 ) ; +#67973 = ORIENTED_EDGE ( 'NONE', *, *, #60903, .T. ) ; +#67974 = ORIENTED_EDGE ( 'NONE', *, *, #36630, .F. ) ; +#67975 = ORIENTED_EDGE ( 'NONE', *, *, #14940, .T. ) ; +#67976 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67978 = ORIENTED_EDGE ( 'NONE', *, *, #74427, .F. ) ; +#67979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67980 = EDGE_CURVE ( 'NONE', #15610, #32242, #57350, .T. ) ; +#67981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1928, #39183, #20722, #64265 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199193300, 0.006247607834322183000 ), + .UNSPECIFIED. ) ; +#67982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67983 = ORIENTED_EDGE ( 'NONE', *, *, #66912, .T. ) ; +#67984 = FACE_OUTER_BOUND ( 'NONE', #20295, .T. ) ; +#67985 = ORIENTED_EDGE ( 'NONE', *, *, #62642, .T. ) ; +#67986 = CARTESIAN_POINT ( 'NONE', ( -17.38231690878858900, 38.89503779644464700, -28.41840204704135400 ) ) ; +#67987 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286465200, 72.66699492863848800, -28.67024809316607300 ) ) ; +#67988 = EDGE_CURVE ( 'NONE', #46133, #80318, #42874, .T. ) ; +#67989 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67991 = EDGE_CURVE ( 'NONE', #53776, #26791, #28480, .T. ) ; +#67990 = VERTEX_POINT ( 'NONE', #79598 ) ; +#67992 = ORIENTED_EDGE ( 'NONE', *, *, #8420, .T. ) ; +#67993 = FACE_OUTER_BOUND ( 'NONE', #24363, .T. ) ; +#67994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67995 = AXIS2_PLACEMENT_3D ( 'NONE', #78882, #41578, #4319 ) ; +#67996 = ORIENTED_EDGE ( 'NONE', *, *, #5934, .F. ) ; +#67997 = EDGE_CURVE ( 'NONE', #16590, #28268, #13977, .T. ) ; +#67998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67999 = EDGE_CURVE ( 'NONE', #15291, #3351, #80288, .T. ) ; +#68000 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68001 = EDGE_CURVE ( 'NONE', #71810, #6009, #65847, .T. ) ; +#68002 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68003 = ORIENTED_EDGE ( 'NONE', *, *, #10928, .T. ) ; +#68004 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74750, #49685, #18975, #62503 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178131239000, 0.0006016798664341466900 ), + .UNSPECIFIED. ) ; +#68005 = ADVANCED_FACE ( 'NONE', ( #5520 ), #36636, .F. ) ; +#68006 = AXIS2_PLACEMENT_3D ( 'NONE', #7422, #50923, #13732 ) ; +#68007 = CIRCLE ( 'NONE', #9287, 10.00000000000009200 ) ; +#68008 = VERTEX_POINT ( 'NONE', #61653 ) ; +#68009 = ORIENTED_EDGE ( 'NONE', *, *, #30369, .F. ) ; +#68010 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68011 = ADVANCED_FACE ( 'NONE', ( #22071 ), #3543, .T. ) ; +#68012 = AXIS2_PLACEMENT_3D ( 'NONE', #65908, #28671, #72168 ) ; +#68013 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 70.83333333333332900, -2.545304000185615800 ) ) ; +#68014 = AXIS2_PLACEMENT_3D ( 'NONE', #32867, #76384, #39100 ) ; +#68015 = AXIS2_PLACEMENT_3D ( 'NONE', #40008, #71017, #14995 ) ; +#68016 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 49.42298334620782900, -28.20555803802996700 ) ) ; +#68017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68018 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 35.83333333333335000, -3.349151577478984600 ) ) ; +#68019 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515430100, 51.01872124563919200, -28.53757464917570300 ) ) ; +#68020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68021 = CIRCLE ( 'NONE', #16075, 10.00000000000009400 ) ; +#68022 = ADVANCED_FACE ( 'NONE', ( #53181 ), #51188, .F. ) ; +#68023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68025 = ADVANCED_FACE ( 'NONE', ( #20122 ), #18155, .T. ) ; +#68026 = FACE_OUTER_BOUND ( 'NONE', #55154, .T. ) ; +#68027 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 1.000000000000014700, -1.205558038030005300 ) ) ; +#68028 = EDGE_LOOP ( 'NONE', ( #67844, #66980, #12070 ) ) ; +#68029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57407, #20162, #63688, #26435 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978158900E-007, 0.001052545149297075600 ), + .UNSPECIFIED. ) ; +#68030 = ORIENTED_EDGE ( 'NONE', *, *, #24165, .F. ) ; +#68031 = CARTESIAN_POINT ( 'NONE', ( 9.875008334729891100, 80.01262610361088400, -28.29936525552481500 ) ) ; +#68032 = AXIS2_PLACEMENT_3D ( 'NONE', #68422, #24918, #55899 ) ; +#68033 = EDGE_CURVE ( 'NONE', #5994, #6616, #34715, .T. ) ; +#68034 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68035 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571890700, 18.07141756547868600, -28.70555803802992800 ) ) ; +#68036 = ADVANCED_FACE ( 'NONE', ( #55135 ), #49263, .F. ) ; +#68037 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 30.96868088498122200, -28.51286550264512000 ) ) ; +#68038 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 47.44142842854296300, -28.20555803802996700 ) ) ; +#68039 = CIRCLE ( 'NONE', #32129, 10.00000000000009400 ) ; +#68040 = ORIENTED_EDGE ( 'NONE', *, *, #73402, .T. ) ; +#68041 = CIRCLE ( 'NONE', #33349, 10.00000000000009600 ) ; +#68042 = EDGE_LOOP ( 'NONE', ( #68120, #73938, #67130 ) ) ; +#68043 = VERTEX_POINT ( 'NONE', #12413 ) ; +#68044 = CARTESIAN_POINT ( 'NONE', ( 17.40084336938093300, 79.90722698763532600, -28.41361853548547600 ) ) ; +#68045 = ORIENTED_EDGE ( 'NONE', *, *, #2355, .T. ) ; +#68046 = EDGE_CURVE ( 'NONE', #43592, #65361, #51318, .T. ) ; +#68047 = CIRCLE ( 'NONE', #3772, 10.50000000000009800 ) ; +#68048 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 15.22261628933270000, -28.70555803802992800 ) ) ; +#68049 = ORIENTED_EDGE ( 'NONE', *, *, #3502, .F. ) ; +#68050 = ORIENTED_EDGE ( 'NONE', *, *, #35485, .F. ) ; +#68051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68052 = AXIS2_PLACEMENT_3D ( 'NONE', #18588, #6343, #37309 ) ; +#68053 = ORIENTED_EDGE ( 'NONE', *, *, #61595, .F. ) ; +#68054 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 79.77559325427182600, -28.45987523529581900 ) ) ; +#68055 = ORIENTED_EDGE ( 'NONE', *, *, #24945, .T. ) ; +#68056 = EDGE_LOOP ( 'NONE', ( #17477, #2819, #48024, #36301 ) ) ; +#68057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68058 = ORIENTED_EDGE ( 'NONE', *, *, #58907, .T. ) ; +#68059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68060 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 55.79999999999999000, -28.20555803802997700 ) ) ; +#68061 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880588200, 44.92896305882238300, -28.53160243214821900 ) ) ; +#68062 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819196400, 79.94924284854674600, -28.20555803802997700 ) ) ; +#68063 = ORIENTED_EDGE ( 'NONE', *, *, #13080, .F. ) ; +#68064 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 80.16054007504463600, -28.34042301926881200 ) ) ; +#68065 = CARTESIAN_POINT ( 'NONE', ( 17.91613173906785800, 20.67036336027458500, -28.27338767626450200 ) ) ; +#68066 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#68067 = CONICAL_SURFACE ( 'NONE', #39628, 10.50000000000009900, 0.7853981633974518300 ) ; +#68068 = AXIS2_PLACEMENT_3D ( 'NONE', #71625, #34363, #77871 ) ; +#68069 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .F. ) ; +#68070 = VERTEX_POINT ( 'NONE', #74687 ) ; +#68071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68072 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550040400, 81.76337688193831400, -28.37223523914928700 ) ) ; +#68073 = VERTEX_POINT ( 'NONE', #37382 ) ; +#68074 = VERTEX_POINT ( 'NONE', #138 ) ; +#68075 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 68.62623792124938400, -28.70555803802997700 ) ) ; +#68076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68077 = VECTOR ( 'NONE', #54496, 1000.000000000000000 ) ; +#68078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68079 = CARTESIAN_POINT ( 'NONE', ( -17.22125914545564700, 49.66476764525111100, -28.30311733712048600 ) ) ; +#68080 = AXIS2_PLACEMENT_3D ( 'NONE', #8220, #70254, #45462 ) ; +#68081 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000469800, 80.69949493661177100, -28.70555803803014400 ) ) ; +#68082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#68083 = ORIENTED_EDGE ( 'NONE', *, *, #77289, .T. ) ; +#68084 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28623, #41345, #47571, #10350 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.688072698881470600E-017, 0.001043664170963428700 ), + .UNSPECIFIED. ) ; +#68085 = EDGE_CURVE ( 'NONE', #74017, #35598, #40545, .T. ) ; +#68086 = FACE_OUTER_BOUND ( 'NONE', #40925, .T. ) ; +#68087 = EDGE_LOOP ( 'NONE', ( #38907, #3818, #41605 ) ) ; +#68088 = ORIENTED_EDGE ( 'NONE', *, *, #70755, .F. ) ; +#68089 = EDGE_LOOP ( 'NONE', ( #53437, #9818, #2661, #23667 ) ) ; +#68090 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 41.83333333333330700, -9.205558038030003900 ) ) ; +#68091 = CARTESIAN_POINT ( 'NONE', ( 10.07349184251556200, 70.22161678501157700, -28.29547179040464000 ) ) ; +#68092 = CARTESIAN_POINT ( 'NONE', ( 11.51272810171012900, 51.47860083896963300, -28.56001287362883900 ) ) ; +#68093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68094 = ADVANCED_FACE ( 'NONE', ( #1588 ), #43629, .T. ) ; +#68095 = EDGE_CURVE ( 'NONE', #59347, #68897, #73658, .T. ) ; +#68096 = CONICAL_SURFACE ( 'NONE', #47250, 10.50000000000009200, 0.7853981633974482800 ) ; +#68097 = CIRCLE ( 'NONE', #16579, 10.00000000000009400 ) ; +#68098 = ORIENTED_EDGE ( 'NONE', *, *, #15082, .T. ) ; +#68099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68100 = ADVANCED_FACE ( 'NONE', ( #7436 ), #47307, .T. ) ; +#68101 = AXIS2_PLACEMENT_3D ( 'NONE', #64413, #33365, #76887 ) ; +#68102 = VERTEX_POINT ( 'NONE', #56435 ) ; +#68103 = EDGE_CURVE ( 'NONE', #54740, #70364, #63912, .T. ) ; +#68104 = EDGE_CURVE ( 'NONE', #5295, #63837, #65864, .T. ) ; +#68105 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807188600, 64.80000000000004000, -28.70555803802997700 ) ) ; +#68106 = PLANE ( 'NONE', #27657 ) ; +#68107 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 13.16666666666667300, 9.794441961969994300 ) ) ; +#68108 = CONICAL_SURFACE ( 'NONE', #7556, 10.00000000000009200, 0.7853981633974447300 ) ; +#68110 = ORIENTED_EDGE ( 'NONE', *, *, #54135, .T. ) ; +#68109 = EDGE_CURVE ( 'NONE', #17566, #15610, #36883, .T. ) ; +#68111 = CIRCLE ( 'NONE', #21343, 10.00000000000009200 ) ; +#68112 = ORIENTED_EDGE ( 'NONE', *, *, #4708, .T. ) ; +#68113 = AXIS2_PLACEMENT_3D ( 'NONE', #63955, #76421, #20420 ) ; +#68114 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963100, 64.37738371066720300, -28.70555803803047500 ) ) ; +#68115 = ADVANCED_FACE ( 'NONE', ( #16215 ), #61962, .F. ) ; +#68116 = LINE ( 'NONE', #13861, #14578 ) ; +#68117 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68118 = ORIENTED_EDGE ( 'NONE', *, *, #70825, .T. ) ; +#68119 = ORIENTED_EDGE ( 'NONE', *, *, #49764, .F. ) ; +#68120 = ORIENTED_EDGE ( 'NONE', *, *, #58842, .F. ) ; +#68121 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6227, #55713, #12495, #55983 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081905900000E-007, 0.001076191670833090700 ), + .UNSPECIFIED. ) ; +#68122 = ORIENTED_EDGE ( 'NONE', *, *, #6623, .F. ) ; +#68123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68124 = ORIENTED_EDGE ( 'NONE', *, *, #747, .F. ) ; +#68125 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344343800, 41.67701665379242100, -28.20555803802997400 ) ) ; +#68126 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#68127 = ORIENTED_EDGE ( 'NONE', *, *, #3820, .T. ) ; +#68128 = AXIS2_PLACEMENT_3D ( 'NONE', #43821, #6585, #50067 ) ; +#68129 = EDGE_CURVE ( 'NONE', #25126, #56250, #14252, .T. ) ; +#68130 = ADVANCED_FACE ( 'NONE', ( #80444 ), #7182, .T. ) ; +#68132 = AXIS2_PLACEMENT_3D ( 'NONE', #33152, #26919, #70402 ) ; +#68131 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 44.66666666666668600, 2.794441961969994700 ) ) ; +#68133 = ORIENTED_EDGE ( 'NONE', *, *, #57514, .T. ) ; +#68134 = FACE_OUTER_BOUND ( 'NONE', #76662, .T. ) ; +#68135 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 47.66666666666667100, -3.705558038030004400 ) ) ; +#68136 = ORIENTED_EDGE ( 'NONE', *, *, #61357, .T. ) ; +#68137 = CARTESIAN_POINT ( 'NONE', ( -11.15550207715068300, 9.820334718100440300, -28.30868034705248700 ) ) ; +#68138 = CARTESIAN_POINT ( 'NONE', ( -17.69483626079880900, 41.43383669612129000, -28.27375072930956200 ) ) ; +#68139 = ORIENTED_EDGE ( 'NONE', *, *, #62044, .T. ) ; +#68140 = EDGE_LOOP ( 'NONE', ( #26852, #65191, #6712, #73066 ) ) ; +#68141 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#68142 = PLANE ( 'NONE', #11130 ) ; +#68143 = CIRCLE ( 'NONE', #42053, 10.00000000000009400 ) ; +#68144 = EDGE_CURVE ( 'NONE', #76937, #44354, #22446, .T. ) ; +#68145 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#68146 = ADVANCED_FACE ( 'NONE', ( #32739 ), #76513, .F. ) ; +#68147 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567180300, 9.746602415621831400, -28.20555803802992800 ) ) ; +#68148 = AXIS2_PLACEMENT_3D ( 'NONE', #73093, #35818, #79340 ) ; +#68149 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.54999999999999700, -28.20555803802994200 ) ) ; +#68150 = EDGE_LOOP ( 'NONE', ( #9791, #78612, #71894 ) ) ; +#68151 = AXIS2_PLACEMENT_3D ( 'NONE', #12319, #62091, #30816 ) ; +#68152 = EDGE_LOOP ( 'NONE', ( #65090, #2729, #47082 ) ) ; +#68153 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813500, 89.60439022488338900, -28.70555803802997700 ) ) ; +#68154 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68155 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68157 = FACE_OUTER_BOUND ( 'NONE', #5026, .T. ) ; +#68158 = ORIENTED_EDGE ( 'NONE', *, *, #35832, .T. ) ; +#68159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68160 = ORIENTED_EDGE ( 'NONE', *, *, #6957, .T. ) ; +#68161 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68162 = CARTESIAN_POINT ( 'NONE', ( 16.72467055933556400, 7.633606674725817800, -28.43685635650781800 ) ) ; +#68163 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68164 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 88.16545993132804400, -28.70555803803024400 ) ) ; +#68165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68166 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534571600, 19.60079448659599800, -28.70555803802994200 ) ) ; +#68167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68169 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26920, #45617, #64464, #27187 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001033575782259874200, 0.0004330091189932902500 ), + .UNSPECIFIED. ) ; +#68170 = AXIS2_PLACEMENT_3D ( 'NONE', #30172, #80176, #24156 ) ; +#68171 = FACE_OUTER_BOUND ( 'NONE', #597, .T. ) ; +#68172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68173 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 54.00000000000001400, -1.205558038030002800 ) ) ; +#68174 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63088, #19562, #32070, #75568 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207940065300E-007, 0.0008724366121409707000 ), + .UNSPECIFIED. ) ; +#68175 = VERTEX_POINT ( 'NONE', #63527 ) ; +#68176 = VERTEX_POINT ( 'NONE', #26275 ) ; +#68177 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079885500, 28.66616330387869700, -28.27375072930953700 ) ) ; +#68178 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58057, #64611, #2534, #46054 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695388520997600E-007, 0.0007987676590766501700 ), + .UNSPECIFIED. ) ; +#68179 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 19.16666666666667500, 0.1341879241256129200 ) ) ; +#68180 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#68181 = CARTESIAN_POINT ( 'NONE', ( 12.68596550977831900, 24.54999999999998600, -28.37321477197627600 ) ) ; +#68182 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9536, #53043, #71849, #34583 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002240675813118588100, 0.0006556005029978627600 ), + .UNSPECIFIED. ) ; +#68183 = FACE_OUTER_BOUND ( 'NONE', #45104, .T. ) ; +#68184 = VERTEX_POINT ( 'NONE', #69748 ) ; +#68185 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#68186 = ORIENTED_EDGE ( 'NONE', *, *, #74766, .T. ) ; +#68187 = CARTESIAN_POINT ( 'NONE', ( -10.93544426077506100, 70.09037803491492000, -28.29483400905883500 ) ) ; +#68188 = ORIENTED_EDGE ( 'NONE', *, *, #58085, .F. ) ; +#68189 = CIRCLE ( 'NONE', #77188, 10.50000000000009600 ) ; +#68190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68191 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 21.50000000000001100, -9.258116921287651700 ) ) ; +#68192 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000427200, 68.39962244433168300, -28.53664883431634500 ) ) ; +#68193 = VERTEX_POINT ( 'NONE', #13762 ) ; +#68194 = VERTEX_POINT ( 'NONE', #50955 ) ; +#68195 = ORIENTED_EDGE ( 'NONE', *, *, #68641, .T. ) ; +#68196 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 101.5999999999999900, -18.70555803803000600 ) ) ; +#68197 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68198 = ORIENTED_EDGE ( 'NONE', *, *, #51790, .F. ) ; +#68199 = ORIENTED_EDGE ( 'NONE', *, *, #74928, .T. ) ; +#68200 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736703700, 45.54999999999999700, -28.70555803802996700 ) ) ; +#68201 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68202 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034401200, 17.92298334620717900, -28.20555803803002000 ) ) ; +#68203 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 26.10073525436785500, -28.70555803802994200 ) ) ; +#68204 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68205 = CIRCLE ( 'NONE', #61474, 10.50000000000009900 ) ; +#68206 = ORIENTED_EDGE ( 'NONE', *, *, #1603, .T. ) ; +#68208 = EDGE_CURVE ( 'NONE', #55309, #43512, #7959, .T. ) ; +#68207 = ORIENTED_EDGE ( 'NONE', *, *, #12854, .F. ) ; +#68209 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 38.91070809551056400, -28.20555803802995200 ) ) ; +#68210 = ORIENTED_EDGE ( 'NONE', *, *, #70120, .F. ) ; +#68211 = ADVANCED_FACE ( 'NONE', ( #78515 ), #67806, .T. ) ; +#68212 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#68213 = EDGE_CURVE ( 'NONE', #63365, #53675, #30820, .T. ) ; +#68214 = EDGE_LOOP ( 'NONE', ( #37199, #32184, #66879, #983, #41182, #52588, #39907 ) ) ; +#68215 = ORIENTED_EDGE ( 'NONE', *, *, #19255, .T. ) ; +#68216 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68218 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148838400, 15.00238095238052300, -28.70555803802992800 ) ) ; +#68219 = EDGE_LOOP ( 'NONE', ( #72905, #54320, #59013 ) ) ; +#68220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68221 = ADVANCED_FACE ( 'NONE', ( #12326 ), #74601, .F. ) ; +#68222 = CIRCLE ( 'NONE', #75899, 10.00000000000009600 ) ; +#68223 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432854400, 39.35339758437810100, -28.20555803802995200 ) ) ; +#68224 = ORIENTED_EDGE ( 'NONE', *, *, #53934, .F. ) ; +#68225 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66876, #23357, #60625, #73131 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248700547900, 0.0009400395309963101200 ), + .UNSPECIFIED. ) ; +#68226 = EDGE_CURVE ( 'NONE', #64978, #65169, #74321, .T. ) ; +#68227 = ADVANCED_FACE ( 'NONE', ( #26917 ), #41483, .T. ) ; +#68228 = ORIENTED_EDGE ( 'NONE', *, *, #31768, .T. ) ; +#68229 = FILL_AREA_STYLE_COLOUR ( '', #35334 ) ; +#68230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68231 = EDGE_CURVE ( 'NONE', #8494, #16691, #59865, .T. ) ; +#68232 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68233 = AXIS2_PLACEMENT_3D ( 'NONE', #62724, #6668, #75219 ) ; +#68234 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 25.00000000000000700, 6.794441961969995200 ) ) ; +#68235 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466621500, 29.33106028708543200, -28.57333386111662700 ) ) ; +#68236 = FACE_OUTER_BOUND ( 'NONE', #44829, .T. ) ; +#68237 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988900, 69.63176086632779500, -28.70555803803014400 ) ) ; +#68238 = VERTEX_POINT ( 'NONE', #70277 ) ; +#68239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68240 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#68241 = AXIS2_PLACEMENT_3D ( 'NONE', #78694, #41393, #4143 ) ; +#68242 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68243 = EDGE_CURVE ( 'NONE', #39312, #22802, #45329, .T. ) ; +#68244 = EDGE_CURVE ( 'NONE', #28497, #4812, #58032, .T. ) ; +#68245 = CARTESIAN_POINT ( 'NONE', ( 10.03177803894783600, 60.28233213024648800, -28.25051428653847200 ) ) ; +#68246 = EDGE_CURVE ( 'NONE', #66402, #898, #28906, .T. ) ; +#68247 = AXIS2_PLACEMENT_3D ( 'NONE', #41733, #4484, #47973 ) ; +#68248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68249 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474188300, 38.73827450271715400, -28.47230003642277300 ) ) ; +#68250 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188000700, 18.53085164125271300, -28.45573375118225800 ) ) ; +#68251 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#68252 = ORIENTED_EDGE ( 'NONE', *, *, #75133, .T. ) ; +#68253 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68254 = ORIENTED_EDGE ( 'NONE', *, *, #48539, .T. ) ; +#68255 = AXIS2_PLACEMENT_3D ( 'NONE', #27079, #70569, #33306 ) ; +#68256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68257 = ORIENTED_EDGE ( 'NONE', *, *, #775, .T. ) ; +#68258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68259 = EDGE_CURVE ( 'NONE', #36931, #14293, #30932, .T. ) ; +#68260 = CARTESIAN_POINT ( 'NONE', ( -12.68596550977829900, 14.04999999999997800, -28.37321477197626500 ) ) ; +#68261 = AXIS2_PLACEMENT_3D ( 'NONE', #45011, #20057, #14068 ) ; +#68262 = AXIS2_PLACEMENT_3D ( 'NONE', #65906, #28669, #72162 ) ; +#68263 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 28.66749699759768400, -28.20555803802994200 ) ) ; +#68264 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77898, #34379, #71648, #40621, #3350, #46851 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002057427659082595900, 0.004114855318165191800 ), + .UNSPECIFIED. ) ; +#68265 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68266 = LINE ( 'NONE', #48888, #40012 ) ; +#68267 = EDGE_LOOP ( 'NONE', ( #27478, #69102, #23012, #37896 ) ) ; +#68268 = EDGE_LOOP ( 'NONE', ( #71024, #1606, #71058 ) ) ; +#68269 = CIRCLE ( 'NONE', #40124, 9.500000000000099500 ) ; +#68270 = ORIENTED_EDGE ( 'NONE', *, *, #73781, .T. ) ; +#68271 = AXIS2_PLACEMENT_3D ( 'NONE', #65307, #15495, #21751 ) ; +#68272 = ORIENTED_EDGE ( 'NONE', *, *, #23544, .T. ) ; +#68273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68274 = EDGE_LOOP ( 'NONE', ( #27970, #41741, #69680 ) ) ; +#68275 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 68.66666666666667100, 1.294441961969997200 ) ) ; +#68276 = CIRCLE ( 'NONE', #6192, 10.50000000000009600 ) ; +#68277 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000101300, 90.79999999999984100, -28.70555803802997700 ) ) ; +#68278 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555739800, 79.72166103827326800, -28.53892303408235500 ) ) ; +#68279 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 33.66666666666667900, 2.794441961969992100 ) ) ; +#68280 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52007, #8505, #64590, #27323 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003537385248708247900, 0.0009400395309965444100 ), + .UNSPECIFIED. ) ; +#68281 = AXIS2_PLACEMENT_3D ( 'NONE', #35372, #78892, #41590 ) ; +#68282 = ORIENTED_EDGE ( 'NONE', *, *, #73300, .F. ) ; +#68283 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 41.24660241562182300, -28.20555803802996700 ) ) ; +#68284 = CIRCLE ( 'NONE', #31202, 10.50000000000009600 ) ; +#68285 = CARTESIAN_POINT ( 'NONE', ( -17.26470821603528800, 17.81701335568623200, -28.44647976475484100 ) ) ; +#68286 = ORIENTED_EDGE ( 'NONE', *, *, #79547, .F. ) ; +#68287 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68288 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#68289 = ORIENTED_EDGE ( 'NONE', *, *, #30944, .T. ) ; +#68290 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 71.00000000000000000, -1.205558038030002800 ) ) ; +#68291 = VERTEX_POINT ( 'NONE', #39546 ) ; +#68292 = ORIENTED_EDGE ( 'NONE', *, *, #78731, .T. ) ; +#68293 = ORIENTED_EDGE ( 'NONE', *, *, #21038, .T. ) ; +#68294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68295 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580927400, 32.23263087059573500, -28.67620115463453300 ) ) ; +#68296 = CONICAL_SURFACE ( 'NONE', #30546, 10.00000000000009200, 0.7853981633974447300 ) ; +#68297 = AXIS2_PLACEMENT_3D ( 'NONE', #39621, #2337, #45843 ) ; +#68298 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46970, #9456, #53251, #16004 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721086200, 0.0008252574424209408400 ), + .UNSPECIFIED. ) ; +#68299 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091598200, 37.52574874835215700, -28.70555803803001300 ) ) ; +#68300 = ADVANCED_FACE ( 'NONE', ( #10365 ), #39525, .T. ) ; +#68301 = EDGE_CURVE ( 'NONE', #61551, #58896, #56080, .T. ) ; +#68302 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 15.94142842854248700, -28.20555803803042500 ) ) ; +#68303 = CARTESIAN_POINT ( 'NONE', ( 9.808476898877865200, 20.02667319908792400, -28.37233769390153500 ) ) ; +#68304 = AXIS2_PLACEMENT_3D ( 'NONE', #8415, #51912, #14699 ) ; +#68305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68306 = CYLINDRICAL_SURFACE ( 'NONE', #29507, 10.00000000000000200 ) ; +#68307 = ORIENTED_EDGE ( 'NONE', *, *, #43431, .T. ) ; +#68308 = ORIENTED_EDGE ( 'NONE', *, *, #45288, .T. ) ; +#68309 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571429000, 57.92318720225498700, -28.70555803802997700 ) ) ; +#68310 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59117, #15619, #71646, #34378 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.938893903907228400E-018, 0.001333132141652914600 ), + .UNSPECIFIED. ) ; +#68311 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#68312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68313 = CARTESIAN_POINT ( 'NONE', ( -15.32687855104136100, 36.19460332487159300, -28.70130020486395100 ) ) ; +#68314 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 81.07757630314203800, -28.53861367218593200 ) ) ; +#68315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68316 = ADVANCED_FACE ( 'NONE', ( #60009 ), #46044, .T. ) ; +#68317 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034900, 49.65930907398620800, -28.35186440610858900 ) ) ; +#68318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68321 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34276, #28055, #40236, #77777 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003593416339764630200, 0.0005041857630952008400 ), + .UNSPECIFIED. ) ; +#68320 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812600, 9.968680884981219800, -28.51286550264509500 ) ) ; +#68322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68323 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68324 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68325 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274726500, 45.54999999999998300, -28.20555803802996700 ) ) ; +#68326 = EDGE_CURVE ( 'NONE', #25861, #17320, #8361, .T. ) ; +#68327 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344544500, 10.17701665379220800, -28.20555803802993500 ) ) ; +#68328 = EDGE_CURVE ( 'NONE', #59810, #71106, #16466, .T. ) ; +#68329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68330 = VERTEX_POINT ( 'NONE', #77357 ) ; +#68331 = ORIENTED_EDGE ( 'NONE', *, *, #41758, .T. ) ; +#68332 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.589561077180748700, -28.52734861045624700 ) ) ; +#68333 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 50.02242369685793500, -28.53861367218592100 ) ) ; +#68334 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 59.77559325427183300, -28.45987523529581900 ) ) ; +#68335 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000456500, 80.34510448120789800, -28.37193179497707600 ) ) ; +#68336 = EDGE_CURVE ( 'NONE', #30876, #17663, #1966, .T. ) ; +#68337 = ADVANCED_FACE ( 'NONE', ( #24947 ), #37558, .F. ) ; +#68338 = EDGE_CURVE ( 'NONE', #45996, #54383, #68310, .T. ) ; +#68339 = CONICAL_SURFACE ( 'NONE', #35609, 10.50000000000009800, 0.7853981633974518300 ) ; +#68340 = ORIENTED_EDGE ( 'NONE', *, *, #39978, .F. ) ; +#68341 = AXIS2_PLACEMENT_3D ( 'NONE', #70129, #32874, #76391 ) ; +#68342 = FACE_OUTER_BOUND ( 'NONE', #10305, .T. ) ; +#68343 = VERTEX_POINT ( 'NONE', #52853 ) ; +#68344 = EDGE_CURVE ( 'NONE', #70223, #11961, #23004, .T. ) ; +#68345 = EDGE_LOOP ( 'NONE', ( #72750, #80142, #3182 ) ) ; +#68346 = FACE_OUTER_BOUND ( 'NONE', #35642, .T. ) ; +#68347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68348 = ORIENTED_EDGE ( 'NONE', *, *, #16022, .T. ) ; +#68349 = ORIENTED_EDGE ( 'NONE', *, *, #77402, .F. ) ; +#68350 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 39.66666666666667900, 5.722645192245505700 ) ) ; +#68351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68352 = ORIENTED_EDGE ( 'NONE', *, *, #50204, .F. ) ; +#68353 = AXIS2_PLACEMENT_3D ( 'NONE', #41319, #4066, #47544 ) ; +#68354 = CIRCLE ( 'NONE', #66611, 10.00000000000009200 ) ; +#68355 = EDGE_CURVE ( 'NONE', #28717, #12898, #72652, .T. ) ; +#68356 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655344100, 10.17701665379216200, -28.20555803803002000 ) ) ; +#68357 = EDGE_CURVE ( 'NONE', #65361, #74656, #53852, .T. ) ; +#68358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73322, #29838, #5027, #48514 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.522213672366955700E-017, 0.001179148174662983400 ), + .UNSPECIFIED. ) ; +#68359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68360 = EDGE_CURVE ( 'NONE', #2852, #39193, #39365, .T. ) ; +#68361 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492454500, 31.52620220503759500, -28.70555803802995200 ) ) ; +#68362 = ORIENTED_EDGE ( 'NONE', *, *, #68855, .F. ) ; +#68363 = VERTEX_POINT ( 'NONE', #47119 ) ; +#68364 = CIRCLE ( 'NONE', #74911, 10.00000000000009200 ) ; +#68365 = AXIS2_PLACEMENT_3D ( 'NONE', #62287, #43741, #49720 ) ; +#68366 = ORIENTED_EDGE ( 'NONE', *, *, #72194, .F. ) ; +#68367 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#68368 = ORIENTED_EDGE ( 'NONE', *, *, #46141, .F. ) ; +#68369 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .T. ) ; +#68370 = ORIENTED_EDGE ( 'NONE', *, *, #74983, .T. ) ; +#68371 = FACE_OUTER_BOUND ( 'NONE', #29773, .T. ) ; +#68372 = PLANE ( 'NONE', #8453 ) ; +#68373 = ORIENTED_EDGE ( 'NONE', *, *, #34050, .F. ) ; +#68374 = EDGE_CURVE ( 'NONE', #72470, #66272, #54123, .T. ) ; +#68375 = FACE_OUTER_BOUND ( 'NONE', #46705, .T. ) ; +#68376 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #43575, #6348 ) ; +#68377 = AXIS2_PLACEMENT_3D ( 'NONE', #18398, #61936, #24659 ) ; +#68378 = CARTESIAN_POINT ( 'NONE', ( 18.01268492843964000, 90.30637265398596000, -28.24165217761365200 ) ) ; +#68379 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524700, 90.16054007504463600, -28.34042301926880800 ) ) ; +#68380 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#68381 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68382 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999956500, 71.78933626866478300, -28.53923937255202100 ) ) ; +#68383 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 11.00000000000001800, -12.20555803803000200 ) ) ; +#68384 = ORIENTED_EDGE ( 'NONE', *, *, #73237, .F. ) ; +#68385 = CARTESIAN_POINT ( 'NONE', ( 11.53374414036862600, 91.59999999999999400, -28.70555803803024400 ) ) ; +#68386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68387 = LINE ( 'NONE', #8590, #20716 ) ; +#68388 = ORIENTED_EDGE ( 'NONE', *, *, #53162, .F. ) ; +#68389 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68390 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68391 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68392 = AXIS2_PLACEMENT_3D ( 'NONE', #5247, #48724, #11514 ) ; +#68393 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68394 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26959, #64233, #45650, #8414 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207983609100E-007, 0.0008724366121406936900 ), + .UNSPECIFIED. ) ; +#68395 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68396 = ADVANCED_FACE ( 'NONE', ( #70672 ), #35656, .F. ) ; +#68397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68398 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#68399 = AXIS2_PLACEMENT_3D ( 'NONE', #34739, #78247, #40980 ) ; +#68400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68401 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 45.50000000000000700, 2.454695999814380200 ) ) ; +#68402 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#68403 = EDGE_CURVE ( 'NONE', #69758, #70673, #52148, .T. ) ; +#68404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36511, #73804, #42769, #5526 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0002670038068533373200 ), + .UNSPECIFIED. ) ; +#68405 = ORIENTED_EDGE ( 'NONE', *, *, #14378, .F. ) ; +#68406 = AXIS2_PLACEMENT_3D ( 'NONE', #24596, #68099, #30860 ) ; +#68407 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 57.46443389862717100, -28.54207364681943600 ) ) ; +#68408 = ORIENTED_EDGE ( 'NONE', *, *, #45805, .F. ) ; +#68409 = CARTESIAN_POINT ( 'NONE', ( 4.161733373201526500, 93.79966511081674700, -28.47535546536788000 ) ) ; +#68410 = ADVANCED_FACE ( 'NONE', ( #45347 ), #66786, .F. ) ; +#68411 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68413 = AXIS2_PLACEMENT_3D ( 'NONE', #1889, #8135, #76423 ) ; +#68414 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 65.79999999999982700, -28.20555803803014400 ) ) ; +#68415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68417 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 81.43650294695132200, -28.30782889147482400 ) ) ; +#68418 = ORIENTED_EDGE ( 'NONE', *, *, #29195, .T. ) ; +#68419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68420 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344327800, 20.67701665379242500, -28.20555803802994200 ) ) ; +#68421 = CIRCLE ( 'NONE', #79331, 10.50000000000009600 ) ; +#68422 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#68423 = EDGE_LOOP ( 'NONE', ( #29688, #9430, #48207, #42818 ) ) ; +#68424 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68425 = CIRCLE ( 'NONE', #6548, 10.50000000000009600 ) ; +#68426 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .F. ) ; +#68427 = CARTESIAN_POINT ( 'NONE', ( -16.68767301991453400, 54.52958894367175400, -28.56367862433818400 ) ) ; +#68428 = ADVANCED_FACE ( 'NONE', ( #19086 ), #33687, .T. ) ; +#68429 = ADVANCED_FACE ( 'NONE', ( #2512 ), #575, .F. ) ; +#68430 = CONICAL_SURFACE ( 'NONE', #36592, 10.00000000000009400, 0.7853981633974447300 ) ; +#68431 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428619100, 10.02858243452102000, -28.70555803802994200 ) ) ; +#68433 = ORIENTED_EDGE ( 'NONE', *, *, #27020, .F. ) ; +#68432 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609189400, 46.18533208989819600, -28.53910738522652900 ) ) ; +#68434 = ORIENTED_EDGE ( 'NONE', *, *, #73612, .F. ) ; +#68435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68436 = CARTESIAN_POINT ( 'NONE', ( -17.40887775794658400, 49.92043992774114300, -28.41154406527801500 ) ) ; +#68437 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 43.42856308690589600, -28.36981695106780800 ) ) ; +#68438 = EDGE_LOOP ( 'NONE', ( #14321, #75075, #2817, #37491 ) ) ; +#68439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68440 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#68441 = CIRCLE ( 'NONE', #58726, 5.000000000000000900 ) ; +#68442 = CARTESIAN_POINT ( 'NONE', ( 11.44942094185424100, 90.93286564902734900, -28.65428819219321000 ) ) ; +#68443 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857191200, 90.07141756547871100, -28.70555803803030800 ) ) ; +#68444 = ADVANCED_FACE ( 'NONE', ( #6442 ), #48244, .F. ) ; +#68445 = ORIENTED_EDGE ( 'NONE', *, *, #29896, .F. ) ; +#68446 = CONICAL_SURFACE ( 'NONE', #58704, 10.00000000000009400, 0.7853981633974447300 ) ; +#68447 = EDGE_CURVE ( 'NONE', #74697, #22091, #24935, .T. ) ; +#68448 = VERTEX_POINT ( 'NONE', #16687 ) ; +#68449 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005300, 41.07757630314204500, -28.53861367218593500 ) ) ; +#68450 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 51.83333333333332900, -4.152999154772353500 ) ) ; +#68452 = EDGE_CURVE ( 'NONE', #36192, #69303, #50194, .T. ) ; +#68451 = ORIENTED_EDGE ( 'NONE', *, *, #53794, .F. ) ; +#68453 = ORIENTED_EDGE ( 'NONE', *, *, #7876, .F. ) ; +#68454 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260100800, 70.20034312068827400, -28.70555803803001300 ) ) ; +#68455 = ORIENTED_EDGE ( 'NONE', *, *, #76852, .T. ) ; +#68456 = LINE ( 'NONE', #46867, #70394 ) ; +#68457 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 17.00000000000000700, -1.205558038030002800 ) ) ; +#68458 = ORIENTED_EDGE ( 'NONE', *, *, #63587, .F. ) ; +#68459 = EDGE_CURVE ( 'NONE', #7748, #68875, #64855, .T. ) ; +#68460 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24256, #18003, #55248, #30537 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714317039300E-007, 0.0005869108620977539200 ), + .UNSPECIFIED. ) ; +#68461 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68462 = EDGE_LOOP ( 'NONE', ( #54456, #47668, #351 ) ) ; +#68463 = VERTEX_POINT ( 'NONE', #79246 ) ; +#68464 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#68465 = EDGE_CURVE ( 'NONE', #8139, #22912, #68726, .T. ) ; +#68466 = EDGE_CURVE ( 'NONE', #69760, #25158, #4490, .T. ) ; +#68467 = EDGE_LOOP ( 'NONE', ( #80514, #12805, #69021 ) ) ; +#68468 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 80.34267608797554800, -28.20555803803047800 ) ) ; +#68469 = CIRCLE ( 'NONE', #51279, 10.50000000000009600 ) ; +#68470 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761000, 51.43945992495534400, -28.34042301926881900 ) ) ; +#68471 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 19.33333333333333600, 4.294441961970000500 ) ) ; +#68472 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540331000, 82.51973550835656100, -28.70555803803005900 ) ) ; +#68473 = AXIS2_PLACEMENT_3D ( 'NONE', #51655, #57952, #8145 ) ; +#68474 = EDGE_CURVE ( 'NONE', #2754, #65129, #10478, .T. ) ; +#68475 = EDGE_CURVE ( 'NONE', #22718, #9694, #31743, .T. ) ; +#68476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68478 = EDGE_CURVE ( 'NONE', #14733, #74584, #17153, .T. ) ; +#68479 = CARTESIAN_POINT ( 'NONE', ( 10.97683272551917200, 18.08088969930748700, -28.30223898143247000 ) ) ; +#68480 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#68481 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310476400, 60.10230989102911500, -28.61774594594330900 ) ) ; +#68482 = AXIS2_PLACEMENT_3D ( 'NONE', #25369, #68864, #31620 ) ; +#68483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68484 = FACE_OUTER_BOUND ( 'NONE', #62364, .T. ) ; +#68485 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285725100, 57.92318720225497900, -28.70555803802997700 ) ) ; +#68486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1907, #39171, #14449, #57956 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318541751700, 0.001296017758336663000 ), + .UNSPECIFIED. ) ; +#68488 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#68489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68490 = CARTESIAN_POINT ( 'NONE', ( 16.65384615384643800, 60.79999999999999700, -28.55171188418380600 ) ) ; +#68491 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844497400, 55.79999999999999000, -28.20555803802997700 ) ) ; +#68493 = EDGE_LOOP ( 'NONE', ( #18172, #39926, #67910, #31608, #5591, #17023, #67447, #3120 ) ) ; +#68492 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#68494 = AXIS2_PLACEMENT_3D ( 'NONE', #28022, #71505, #34235 ) ; +#68495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68496 = AXIS2_PLACEMENT_3D ( 'NONE', #23517, #67020, #29801 ) ; +#68497 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56029, #18775, #74811, #37512 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815776866200E-007, 0.0007763385940576963800 ), + .UNSPECIFIED. ) ; +#68498 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#68499 = AXIS2_PLACEMENT_3D ( 'NONE', #30923, #6160, #49367 ) ; +#68500 = ORIENTED_EDGE ( 'NONE', *, *, #40726, .T. ) ; +#68501 = ADVANCED_FACE ( 'NONE', ( #21057 ), #67255, .T. ) ; +#68503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68502 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#68504 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68505 = FACE_OUTER_BOUND ( 'NONE', #25438, .T. ) ; +#68506 = ORIENTED_EDGE ( 'NONE', *, *, #44104, .F. ) ; +#68507 = FACE_OUTER_BOUND ( 'NONE', #17042, .T. ) ; +#68508 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310682100, 18.10230989102885200, -28.61774594594303500 ) ) ; +#68509 = ORIENTED_EDGE ( 'NONE', *, *, #20374, .T. ) ; +#68510 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 22.83333333333335700, -9.205558038030003900 ) ) ; +#68511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68512 = ORIENTED_EDGE ( 'NONE', *, *, #48666, .T. ) ; +#68513 = FACE_OUTER_BOUND ( 'NONE', #41095, .T. ) ; +#68514 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14705, #70718, #8687, #52193, #14969, #58493 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 6.659282363910180400E-016, 0.002153583375035095100, 0.004307166750069524100 ), + .UNSPECIFIED. ) ; +#68515 = ORIENTED_EDGE ( 'NONE', *, *, #22233, .F. ) ; +#68516 = VERTEX_POINT ( 'NONE', #61302 ) ; +#68517 = ORIENTED_EDGE ( 'NONE', *, *, #34658, .T. ) ; +#68518 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063250600, 39.00210619075099300, -28.25343951603328200 ) ) ; +#68519 = ADVANCED_FACE ( 'NONE', ( #46282 ), #60946, .F. ) ; +#68520 = AXIS2_PLACEMENT_3D ( 'NONE', #78057, #40776, #3507 ) ; +#68521 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68522 = EDGE_CURVE ( 'NONE', #9420, #63818, #77470, .T. ) ; +#68523 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561700, 65.79999999999999700, -28.70525300642875200 ) ) ; +#68524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68525 = FACE_OUTER_BOUND ( 'NONE', #33480, .T. ) ; +#68526 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534557800, 30.10079448659599800, -28.70555803802995200 ) ) ; +#68527 = EDGE_LOOP ( 'NONE', ( #58260, #8549, #76847, #55128 ) ) ; +#68528 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000002700, 49.66749699759768100, -28.20555803802996700 ) ) ; +#68529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68530 = FACE_OUTER_BOUND ( 'NONE', #14318, .T. ) ; +#68531 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 59.94924284854741400, -28.20555803802997700 ) ) ; +#68532 = ORIENTED_EDGE ( 'NONE', *, *, #14852, .F. ) ; +#68533 = ADVANCED_FACE ( 'NONE', ( #79434 ), #11302, .F. ) ; +#68534 = EDGE_CURVE ( 'NONE', #17105, #4205, #27858, .T. ) ; +#68535 = ORIENTED_EDGE ( 'NONE', *, *, #74899, .F. ) ; +#68536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68537 = AXIS2_PLACEMENT_3D ( 'NONE', #14631, #58138, #20891 ) ; +#68538 = EDGE_LOOP ( 'NONE', ( #17227, #76315, #79089 ) ) ; +#68539 = PLANE ( 'NONE', #8771 ) ; +#68540 = ORIENTED_EDGE ( 'NONE', *, *, #68605, .T. ) ; +#68541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68542 = CONICAL_SURFACE ( 'NONE', #11119, 10.00000000000009200, 0.7853981633974447300 ) ; +#68543 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925612600, 10.78032162676581500, -28.55467576046953900 ) ) ; +#68544 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80017, #36467, #5486, #48959 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539842100, 0.0009765394310395404400 ), + .UNSPECIFIED. ) ; +#68545 = ADVANCED_FACE ( 'NONE', ( #13257 ), #42405, .T. ) ; +#68546 = ORIENTED_EDGE ( 'NONE', *, *, #77596, .T. ) ; +#68547 = AXIS2_PLACEMENT_3D ( 'NONE', #69832, #32568, #76083 ) ; +#68548 = EDGE_LOOP ( 'NONE', ( #67574, #24683, #16546, #66152 ) ) ; +#68549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68551 = ORIENTED_EDGE ( 'NONE', *, *, #38164, .T. ) ; +#68552 = CONICAL_SURFACE ( 'NONE', #35169, 10.00000000000009200, 0.7853981633974447300 ) ; +#68553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68554 = ADVANCED_FACE ( 'NONE', ( #75509 ), #9311, .T. ) ; +#68555 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 66.50000000000001400, -4.865812075874393000 ) ) ; +#68556 = AXIS2_PLACEMENT_3D ( 'NONE', #47252, #10029, #53545 ) ; +#68557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68559 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 31.50000000000001400, -7.061964498581016200 ) ) ; +#68560 = CARTESIAN_POINT ( 'NONE', ( 10.17765502179703900, 7.660694734812120800, -28.43770179755625800 ) ) ; +#68561 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 87.94142842854296300, -28.20555803802997700 ) ) ; +#68562 = EDGE_CURVE ( 'NONE', #29278, #2305, #25903, .T. ) ; +#68563 = LINE ( 'NONE', #11031, #37387 ) ; +#68564 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660940800, 80.13716795162658000, -28.48697406221668500 ) ) ; +#68565 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 90.51916201875667400, -28.45106778992437700 ) ) ; +#68566 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 68.83333333333334300, 1.741883078712340300 ) ) ; +#68567 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#68568 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68569 = VERTEX_POINT ( 'NONE', #74338 ) ; +#68570 = ORIENTED_EDGE ( 'NONE', *, *, #64491, .T. ) ; +#68571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68573 = EDGE_LOOP ( 'NONE', ( #54995, #69907, #62420, #51828, #61163 ) ) ; +#68574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68576 = SURFACE_STYLE_FILL_AREA ( #15428 ) ; +#68577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68578 = ORIENTED_EDGE ( 'NONE', *, *, #80705, .F. ) ; +#68579 = FACE_OUTER_BOUND ( 'NONE', #41258, .T. ) ; +#68580 = EDGE_CURVE ( 'NONE', #68932, #9151, #44323, .T. ) ; +#68581 = ORIENTED_EDGE ( 'NONE', *, *, #57189, .F. ) ; +#68582 = EDGE_CURVE ( 'NONE', #426, #51106, #76769, .T. ) ; +#68583 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686878100, 71.58005252438373100, -28.24986299608873700 ) ) ; +#68584 = CYLINDRICAL_SURFACE ( 'NONE', #72489, 10.00000000000000000 ) ; +#68585 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.16749699759769500, -28.20555803802997700 ) ) ; +#68586 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#68587 = CONICAL_SURFACE ( 'NONE', #3287, 10.50000000000009200, 0.7853981633974482800 ) ; +#68588 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73264, #54482, #42210, #4973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569918020500E-007, 0.0004669842289003356800 ), + .UNSPECIFIED. ) ; +#68589 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#68590 = EDGE_LOOP ( 'NONE', ( #59448, #56255, #16913, #58182, #36510, #72385, #8031, #78278 ) ) ; +#68591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68592 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#68593 = ORIENTED_EDGE ( 'NONE', *, *, #71758, .T. ) ; +#68595 = ORIENTED_EDGE ( 'NONE', *, *, #47089, .F. ) ; +#68594 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68598 = AXIS2_PLACEMENT_3D ( 'NONE', #43015, #5776, #49246 ) ; +#68599 = EDGE_CURVE ( 'NONE', #11971, #63478, #24564, .T. ) ; +#68600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68601 = EDGE_CURVE ( 'NONE', #78215, #77587, #10104, .T. ) ; +#68602 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747118300, 9.968680884981161200, -28.51286550264485000 ) ) ; +#68603 = CIRCLE ( 'NONE', #5466, 10.00000000000009200 ) ; +#68604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68605 = EDGE_CURVE ( 'NONE', #40181, #78441, #15183, .T. ) ; +#68606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68607 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000035100, 90.69949493661177100, -28.70555803802997700 ) ) ; +#68608 = ORIENTED_EDGE ( 'NONE', *, *, #38070, .T. ) ; +#68609 = CONICAL_SURFACE ( 'NONE', #51268, 10.00000000000009400, 0.7853981633974447300 ) ; +#68610 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994200, 30.93250300240228900, -28.20555803802996700 ) ) ; +#68611 = ORIENTED_EDGE ( 'NONE', *, *, #20974, .F. ) ; +#68612 = ORIENTED_EDGE ( 'NONE', *, *, #53070, .T. ) ; +#68613 = EDGE_LOOP ( 'NONE', ( #15260, #65713, #37360, #67970, #78883 ) ) ; +#68614 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099065900, 20.53732497909462000, -28.41043597897460400 ) ) ; +#68615 = ORIENTED_EDGE ( 'NONE', *, *, #38734, .F. ) ; +#68616 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68617 = EDGE_LOOP ( 'NONE', ( #19343, #68272, #41813 ) ) ; +#68618 = CONICAL_SURFACE ( 'NONE', #3220, 10.00000000000009200, 0.7853981633974447300 ) ; +#68619 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919941100, 28.87705528805140900, -28.20555803802994200 ) ) ; +#68620 = AXIS2_PLACEMENT_3D ( 'NONE', #49865, #646, #19164 ) ; +#68621 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ; +#68622 = ORIENTED_EDGE ( 'NONE', *, *, #11896, .T. ) ; +#68623 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#68624 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142856768900, 57.92318720225498700, -28.70555803803001300 ) ) ; +#68625 = EDGE_LOOP ( 'NONE', ( #74305, #79004, #29262 ) ) ; +#68626 = ORIENTED_EDGE ( 'NONE', *, *, #19975, .T. ) ; +#68627 = ORIENTED_EDGE ( 'NONE', *, *, #26260, .F. ) ; +#68628 = ADVANCED_FACE ( 'NONE', ( #58967 ), #7358, .F. ) ; +#68629 = CIRCLE ( 'NONE', #46520, 10.00000000000009200 ) ; +#68630 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298124000, 75.79999999999999700, -28.70555803802997700 ) ) ; +#68631 = ADVANCED_FACE ( 'NONE', ( #29833 ), #55058, .F. ) ; +#68632 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 37.50000000000001400, -7.061964498581022400 ) ) ; +#68633 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 80.36203212531316400, -28.38801640354855800 ) ) ; +#68634 = AXIS2_PLACEMENT_3D ( 'NONE', #64273, #26997, #70479 ) ; +#68635 = EDGE_CURVE ( 'NONE', #32703, #43819, #71626, .T. ) ; +#68636 = CARTESIAN_POINT ( 'NONE', ( -16.84726953868444400, 39.51513784120219700, -28.32821106612155800 ) ) ; +#68637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15640, #71672, #77921, #40635 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0002673660010786253100 ), + .UNSPECIFIED. ) ; +#68638 = ADVANCED_FACE ( 'NONE', ( #40466 ), #75118, .T. ) ; +#68639 = CIRCLE ( 'NONE', #69937, 10.00000000000009400 ) ; +#68641 = EDGE_CURVE ( 'NONE', #3853, #56019, #57031, .T. ) ; +#68640 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20571, #57829, #2038, #45536 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629349242621000E-007, 0.0004318366892326819400 ), + .UNSPECIFIED. ) ; +#68642 = AXIS2_PLACEMENT_3D ( 'NONE', #56832, #63093, #13332 ) ; +#68643 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7902, #38627, #20444, #63985 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099553759417300E-007, 0.0008759529789578683700 ), + .UNSPECIFIED. ) ; +#68644 = EDGE_LOOP ( 'NONE', ( #26918, #5231, #24518, #29141 ) ) ; +#68645 = FACE_OUTER_BOUND ( 'NONE', #63229, .T. ) ; +#68646 = ORIENTED_EDGE ( 'NONE', *, *, #77274, .F. ) ; +#68647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68648 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312778200, 30.99769010897088600, -28.61774594593774500 ) ) ; +#68649 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 8.833333333333348100, 9.794441961969999600 ) ) ; +#68650 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23297, #60577, #73089, #35811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795603300 ), + .UNSPECIFIED. ) ; +#68651 = FACE_OUTER_BOUND ( 'NONE', #20109, .T. ) ; +#68652 = AXIS2_PLACEMENT_3D ( 'NONE', #7451, #32228, #50953 ) ; +#68653 = CONICAL_SURFACE ( 'NONE', #47039, 10.50000000000009600, 0.7853981633974500600 ) ; +#68654 = ORIENTED_EDGE ( 'NONE', *, *, #39136, .T. ) ; +#68655 = CIRCLE ( 'NONE', #67235, 9.500000000000099500 ) ; +#68656 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68657 = ORIENTED_EDGE ( 'NONE', *, *, #28606, .F. ) ; +#68658 = CARTESIAN_POINT ( 'NONE', ( -2.844497922849300600, 20.32033471810044000, -28.30868034705250100 ) ) ; +#68659 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571388500, 63.67681279774495100, -28.70555803803047500 ) ) ; +#68660 = VERTEX_POINT ( 'NONE', #19351 ) ; +#68661 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048800, 90.69949493661160000, -28.70555803803030800 ) ) ; +#68662 = AXIS2_PLACEMENT_3D ( 'NONE', #63779, #70262, #57767 ) ; +#68663 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462688400, 70.20590598242371500, -28.39369363572356200 ) ) ; +#68664 = CIRCLE ( 'NONE', #52980, 10.50000000000009600 ) ; +#68665 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#68667 = FACE_OUTER_BOUND ( 'NONE', #18826, .T. ) ; +#68666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68668 = CARTESIAN_POINT ( 'NONE', ( 12.53318012365765100, 65.79999999999951400, -28.37307693585108100 ) ) ; +#68669 = ORIENTED_EDGE ( 'NONE', *, *, #65420, .F. ) ; +#68670 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68671 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 43.33333333333333600, -5.535685056952199400 ) ) ; +#68672 = ORIENTED_EDGE ( 'NONE', *, *, #62155, .T. ) ; +#68673 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68674 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68675 = VERTEX_POINT ( 'NONE', #62893 ) ; +#68676 = CARTESIAN_POINT ( 'NONE', ( 11.11893552610901100, 70.49763722318468200, -28.32100408376105000 ) ) ; +#68677 = ORIENTED_EDGE ( 'NONE', *, *, #17690, .T. ) ; +#68678 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26588, #39033, #57834, #20575 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646163900, 0.0009605145132142348800 ), + .UNSPECIFIED. ) ; +#68679 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472528500, 13.73212903577627800, -28.37244029424738300 ) ) ; +#68680 = ORIENTED_EDGE ( 'NONE', *, *, #79438, .F. ) ; +#68681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68682 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 101.6000000000000100, -18.70555803803001300 ) ) ; +#68683 = FACE_OUTER_BOUND ( 'NONE', #57386, .T. ) ; +#68684 = CARTESIAN_POINT ( 'NONE', ( 16.57127784839741800, 90.12774695439695400, -28.53061079109137000 ) ) ; +#68686 = ORIENTED_EDGE ( 'NONE', *, *, #2849, .F. ) ; +#68685 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528042064600, 63.65857157145704500, -28.37229765499295200 ) ) ; +#68687 = CARTESIAN_POINT ( 'NONE', ( 6.285714285713901900, 73.67681279774508600, -28.70555803803030800 ) ) ; +#68688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34988, #72251, #41217, #3943 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417466013347000E-007, 0.0004435563144346459700 ), + .UNSPECIFIED. ) ; +#68690 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#68691 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830878800, 10.14954451135940900, -28.33400579219035700 ) ) ; +#68692 = LINE ( 'NONE', #75306, #54091 ) ; +#68693 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68694 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146668300, 49.30869142985029900, -28.37223374938523400 ) ) ; +#68695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68696 = VERTEX_POINT ( 'NONE', #840 ) ; +#68697 = CONICAL_SURFACE ( 'NONE', #31922, 10.50000000000009600, 0.7853981633974482800 ) ; +#68698 = EDGE_CURVE ( 'NONE', #12801, #58205, #73577, .T. ) ; +#68699 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714215400, 87.92318720225456700, -28.70555803803030800 ) ) ; +#68700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68701 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#68702 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489658800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#68703 = EDGE_CURVE ( 'NONE', #35603, #26320, #23954, .T. ) ; +#68704 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 51.36762008758048400, -28.26633708900884300 ) ) ; +#68705 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079884800, 39.16616330387869000, -28.27375072930954800 ) ) ; +#68706 = ADVANCED_FACE ( 'NONE', ( #62901 ), #20044, .T. ) ; +#68707 = EDGE_CURVE ( 'NONE', #42618, #48573, #76402, .T. ) ; +#68708 = AXIS2_PLACEMENT_3D ( 'NONE', #39162, #1899, #45395 ) ; +#68709 = CIRCLE ( 'NONE', #74614, 10.00000000000009400 ) ; +#68710 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 49.66666666666668600, 4.294441961969993400 ) ) ; +#68711 = CIRCLE ( 'NONE', #80637, 10.00000000000009600 ) ; +#68712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68713 = ORIENTED_EDGE ( 'NONE', *, *, #30600, .F. ) ; +#68714 = ADVANCED_FACE ( 'NONE', ( #5439 ), #26170, .F. ) ; +#68715 = FACE_OUTER_BOUND ( 'NONE', #2392, .T. ) ; +#68716 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 14.83333333333334500, -2.545304000185615800 ) ) ; +#68717 = AXIS2_PLACEMENT_3D ( 'NONE', #33835, #21340, #52286 ) ; +#68718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68719 = ORIENTED_EDGE ( 'NONE', *, *, #62860, .F. ) ; +#68720 = EDGE_CURVE ( 'NONE', #1022, #49283, #61974, .T. ) ; +#68721 = EDGE_CURVE ( 'NONE', #36273, #34575, #47445, .T. ) ; +#68722 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655937800, 17.92298334620740300, -28.20555803802993500 ) ) ; +#68723 = AXIS2_PLACEMENT_3D ( 'NONE', #19882, #63413, #26144 ) ; +#68724 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68725 = CIRCLE ( 'NONE', #25490, 9.500000000000097700 ) ; +#68726 = CIRCLE ( 'NONE', #55869, 9.500000000000097700 ) ; +#68727 = ORIENTED_EDGE ( 'NONE', *, *, #2924, .T. ) ; +#68728 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#68729 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52929, #15695, #71735, #34466 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193583594800, 0.0005865296644889253900 ), + .UNSPECIFIED. ) ; +#68730 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943328200, 24.54999999999998600, -28.70555803802994200 ) ) ; +#68731 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 17.16666666666667500, -4.152999154772358800 ) ) ; +#68732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68733 = ORIENTED_EDGE ( 'NONE', *, *, #54007, .T. ) ; +#68734 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6874, #44087, #50348, #13164, #56632, #19383 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0003916983562637877900, 0.001136699028517832800, 0.001881699700771882100 ), + .UNSPECIFIED. ) ; +#68735 = EDGE_CURVE ( 'NONE', #39312, #19234, #33030, .T. ) ; +#68736 = EDGE_LOOP ( 'NONE', ( #34829, #68680, #20948 ) ) ; +#68737 = AXIS2_PLACEMENT_3D ( 'NONE', #55438, #18195, #61735 ) ; +#68738 = AXIS2_PLACEMENT_3D ( 'NONE', #21585, #3314, #40309 ) ; +#68739 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#68740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68741 = ADVANCED_FACE ( 'NONE', ( #69658 ), #51111, .T. ) ; +#68742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68743 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655676200, 28.42298334620756600, -28.20555803802994500 ) ) ; +#68744 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53666, #41423, #60219, #22935 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083080053800E-007, 0.0003101809493108602400 ), + .UNSPECIFIED. ) ; +#68745 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 41.24660241562189400, -28.20555803802996700 ) ) ; +#68746 = CIRCLE ( 'NONE', #70501, 10.00000000000009200 ) ; +#68747 = ORIENTED_EDGE ( 'NONE', *, *, #59818, .F. ) ; +#68748 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68749 = CARTESIAN_POINT ( 'NONE', ( 9.279102202939125000, 71.50050326225940000, -28.63287226700145300 ) ) ; +#68750 = ORIENTED_EDGE ( 'NONE', *, *, #72071, .T. ) ; +#68751 = VERTEX_POINT ( 'NONE', #20432 ) ; +#68752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68753 = AXIS2_PLACEMENT_3D ( 'NONE', #36797, #80336, #43051 ) ; +#68754 = VERTEX_POINT ( 'NONE', #63973 ) ; +#68755 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 70.34267608797600200, -28.20555803802997700 ) ) ; +#68756 = ORIENTED_EDGE ( 'NONE', *, *, #30389, .F. ) ; +#68757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68758 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609406800, 71.46283204837340000, -28.48697406221669900 ) ) ; +#68759 = CARTESIAN_POINT ( 'NONE', ( -11.76631883508425400, 94.21465145973552100, -28.37247945210592800 ) ) ; +#68760 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 27.12623792124938000, -28.70555803802994200 ) ) ; +#68761 = FACE_OUTER_BOUND ( 'NONE', #21130, .T. ) ; +#68762 = CIRCLE ( 'NONE', #66588, 10.00000000000009200 ) ; +#68763 = ORIENTED_EDGE ( 'NONE', *, *, #79383, .F. ) ; +#68764 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47784, #4299, #16823, #60359 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.139252485880417300E-016, 0.001179148174663246000 ), + .UNSPECIFIED. ) ; +#68766 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#68767 = CARTESIAN_POINT ( 'NONE', ( -15.06104143737605000, 9.938958562623941600, -28.70555803803011200 ) ) ; +#68768 = VERTEX_POINT ( 'NONE', #51385 ) ; +#68769 = FACE_OUTER_BOUND ( 'NONE', #63382, .T. ) ; +#68770 = AXIS2_PLACEMENT_3D ( 'NONE', #40769, #34816, #9786 ) ; +#68771 = ORIENTED_EDGE ( 'NONE', *, *, #27697, .F. ) ; +#68772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68773 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 20.66666666666668600, 5.722645192245505700 ) ) ; +#68774 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68775 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#68776 = ORIENTED_EDGE ( 'NONE', *, *, #70656, .F. ) ; +#68777 = VECTOR ( 'NONE', #34690, 1000.000000000000000 ) ; +#68778 = CONICAL_SURFACE ( 'NONE', #24124, 10.50000000000009600, 0.7853981633974500600 ) ; +#68779 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68780 = AXIS2_PLACEMENT_3D ( 'NONE', #79775, #42480, #5246 ) ; +#68781 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#68782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68783 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73994, #30485, #36699, #80231 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001553543421249055700, 0.0008027336008645553000 ), + .UNSPECIFIED. ) ; +#68784 = ORIENTED_EDGE ( 'NONE', *, *, #49107, .F. ) ; +#68785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68786 = EDGE_CURVE ( 'NONE', #37342, #22183, #18582, .T. ) ; +#68787 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#68788 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#68789 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999958600, 81.96823913367188700, -28.70555803803030800 ) ) ; +#68790 = AXIS2_PLACEMENT_3D ( 'NONE', #23142, #66653, #29431 ) ; +#68791 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68792 = FACE_OUTER_BOUND ( 'NONE', #72379, .T. ) ; +#68793 = ORIENTED_EDGE ( 'NONE', *, *, #20100, .F. ) ; +#68794 = FACE_OUTER_BOUND ( 'NONE', #27894, .T. ) ; +#68795 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510359800, 18.15930907398620400, -28.35186440610855700 ) ) ; +#68796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68797 = ORIENTED_EDGE ( 'NONE', *, *, #17737, .T. ) ; +#68798 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68799 = CONICAL_SURFACE ( 'NONE', #5033, 10.00000000000009200, 0.7853981633974447300 ) ; +#68800 = CARTESIAN_POINT ( 'NONE', ( 9.438174915909124600, 20.48385710212512100, -28.57719681746176100 ) ) ; +#68801 = EDGE_LOOP ( 'NONE', ( #16294, #75402, #78132 ) ) ; +#68802 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 90.13716795162659400, -28.48697406221667400 ) ) ; +#68803 = ADVANCED_FACE ( 'NONE', ( #67720 ), #1903, .T. ) ; +#68804 = CYLINDRICAL_SURFACE ( 'NONE', #5096, 10.00000000000000000 ) ; +#68805 = CIRCLE ( 'NONE', #23013, 10.00000000000009400 ) ; +#68807 = EDGE_CURVE ( 'NONE', #34852, #23991, #38480, .T. ) ; +#68806 = ORIENTED_EDGE ( 'NONE', *, *, #59413, .F. ) ; +#68808 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68809 = EDGE_CURVE ( 'NONE', #62861, #7991, #36559, .T. ) ; +#68810 = CARTESIAN_POINT ( 'NONE', ( 17.04027359854992000, 18.22437813624584300, -28.30310527599334200 ) ) ; +#68811 = ORIENTED_EDGE ( 'NONE', *, *, #11217, .T. ) ; +#68812 = ADVANCED_FACE ( 'NONE', ( #21982 ), #49186, .T. ) ; +#68813 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 64.33333333333334300, 3.124568980892187500 ) ) ; +#68814 = EDGE_CURVE ( 'NONE', #34842, #5209, #65786, .T. ) ; +#68815 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 29.33333333333333600, 5.722645192245503900 ) ) ; +#68816 = EDGE_CURVE ( 'NONE', #57615, #27733, #4100, .T. ) ; +#68817 = FACE_OUTER_BOUND ( 'NONE', #35056, .T. ) ; +#68818 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#68819 = EDGE_LOOP ( 'NONE', ( #48197, #67514, #67460 ) ) ; +#68820 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#68821 = ORIENTED_EDGE ( 'NONE', *, *, #76260, .F. ) ; +#68822 = ADVANCED_FACE ( 'NONE', ( #34640 ), #80357, .F. ) ; +#68823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68824 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 41.49769010897086500, -28.61774594594330900 ) ) ; +#68825 = ADVANCED_FACE ( 'NONE', ( #1515 ), #18077, .T. ) ; +#68826 = ORIENTED_EDGE ( 'NONE', *, *, #34695, .F. ) ; +#68827 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 66.66666666666664300, -6.705558038030000400 ) ) ; +#68828 = ORIENTED_EDGE ( 'NONE', *, *, #50078, .F. ) ; +#68829 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#68830 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 28.65930907398619700, -28.35186440610856500 ) ) ; +#68831 = FACE_OUTER_BOUND ( 'NONE', #46077, .T. ) ; +#68832 = ORIENTED_EDGE ( 'NONE', *, *, #79449, .T. ) ; +#68833 = AXIS2_PLACEMENT_3D ( 'NONE', #50397, #13211, #56690 ) ; +#68834 = EDGE_CURVE ( 'NONE', #2995, #30155, #32669, .T. ) ; +#68835 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.65857157145700300, -28.20555803802997700 ) ) ; +#68836 = EDGE_CURVE ( 'NONE', #52871, #27788, #70409, .T. ) ; +#68837 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#68838 = EDGE_CURVE ( 'NONE', #36042, #29008, #55948, .T. ) ; +#68839 = ADVANCED_FACE ( 'NONE', ( #16132 ), #59889, .T. ) ; +#68840 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 46.96443389862715600, -28.54207364681942500 ) ) ; +#68841 = CARTESIAN_POINT ( 'NONE', ( 4.423544863740858100E-014, 62.97376207875063200, -28.70555803802997700 ) ) ; +#68842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20399, #70146, #76406, #39122 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898955300 ), + .UNSPECIFIED. ) ; +#68843 = CARTESIAN_POINT ( 'NONE', ( -15.16868429911841300, 12.69769540679922500, -28.70555803803001300 ) ) ; +#68844 = FACE_OUTER_BOUND ( 'NONE', #34149, .T. ) ; +#68845 = CARTESIAN_POINT ( 'NONE', ( -2.497924978448516200, 50.60145251508603800, -28.70555803802997700 ) ) ; +#68846 = ORIENTED_EDGE ( 'NONE', *, *, #26758, .F. ) ; +#68847 = AXIS2_PLACEMENT_3D ( 'NONE', #20534, #64065, #26797 ) ; +#68848 = ORIENTED_EDGE ( 'NONE', *, *, #53440, .F. ) ; +#68849 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#68850 = ORIENTED_EDGE ( 'NONE', *, *, #59535, .F. ) ; +#68851 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 41.52858243452107000, -28.70555803802997700 ) ) ; +#68852 = CARTESIAN_POINT ( 'NONE', ( -17.70865097826523600, 89.95051138331402300, -28.33414295261581700 ) ) ; +#68853 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 51.43250300240195800, -28.20555803803030800 ) ) ; +#68854 = CIRCLE ( 'NONE', #62125, 9.500000000000097700 ) ; +#68855 = EDGE_CURVE ( 'NONE', #67122, #60061, #41494, .T. ) ; +#68856 = AXIS2_PLACEMENT_3D ( 'NONE', #10295, #53800, #16559 ) ; +#68857 = AXIS2_PLACEMENT_3D ( 'NONE', #30969, #49681, #68216 ) ; +#68858 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001000, 39.53085164125334900, -28.45573375118225800 ) ) ; +#68859 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6740, #50235, #63186, #25925 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211426700, 0.001517199873936578400 ), + .UNSPECIFIED. ) ; +#68860 = ORIENTED_EDGE ( 'NONE', *, *, #69781, .T. ) ; +#68861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68863 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68865 = CIRCLE ( 'NONE', #3104, 10.50000000000009600 ) ; +#68866 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260020000, 41.39965687931163500, -28.70555803803001600 ) ) ; +#68867 = EDGE_LOOP ( 'NONE', ( #26457, #70614, #69459, #1076, #45516 ) ) ; +#68868 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#68869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25612, #19609, #38331, #1091 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.745703417650792100E-016, 0.001179148174663509400 ), + .UNSPECIFIED. ) ; +#68870 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252813000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#68871 = VECTOR ( 'NONE', #66500, 1000.000000000000000 ) ; +#68872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68873 = AXIS2_PLACEMENT_3D ( 'NONE', #20633, #69845, #26887 ) ; +#68874 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#68875 = VERTEX_POINT ( 'NONE', #35148 ) ; +#68876 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35272, #72525, #16742, #23010 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.903784089385842400E-016, 0.001179148174663462800 ), + .UNSPECIFIED. ) ; +#68877 = AXIS2_PLACEMENT_3D ( 'NONE', #20443, #63983, #26715 ) ; +#68878 = CONICAL_SURFACE ( 'NONE', #1512, 10.50000000000009800, 0.7853981633974518300 ) ; +#68879 = VERTEX_POINT ( 'NONE', #78929 ) ; +#68880 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000700, 57.14999999999999900, -2.478176394252585300E-015 ) ) ; +#68881 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 35.33333333333334300, 2.794441961969998300 ) ) ; +#68882 = ORIENTED_EDGE ( 'NONE', *, *, #76441, .T. ) ; +#68883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68884 = AXIS2_PLACEMENT_3D ( 'NONE', #55886, #18637, #62165 ) ; +#68885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68886 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#68887 = ADVANCED_FACE ( 'NONE', ( #63831 ), #35414, .T. ) ; +#68888 = CIRCLE ( 'NONE', #34283, 10.00000000000009400 ) ; +#68889 = FACE_OUTER_BOUND ( 'NONE', #48599, .T. ) ; +#68890 = ORIENTED_EDGE ( 'NONE', *, *, #79654, .T. ) ; +#68891 = ORIENTED_EDGE ( 'NONE', *, *, #40325, .T. ) ; +#68892 = AXIS2_PLACEMENT_3D ( 'NONE', #5251, #11520, #42489 ) ; +#68893 = EDGE_LOOP ( 'NONE', ( #43764, #40404, #33645, #59002 ) ) ; +#68894 = CARTESIAN_POINT ( 'NONE', ( 4.230830694656798000, 60.65007990305437600, -28.43638873268721000 ) ) ; +#68895 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .F. ) ; +#68896 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #6739, 'design' ) ; +#68897 = VERTEX_POINT ( 'NONE', #23152 ) ; +#68898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68899 = ADVANCED_FACE ( 'NONE', ( #30739 ), #54129, .T. ) ; +#68900 = ORIENTED_EDGE ( 'NONE', *, *, #28222, .F. ) ; +#68901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68902 = CARTESIAN_POINT ( 'NONE', ( 9.668959489915019700, 90.78519534244617300, -28.53901988778297700 ) ) ; +#68903 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22747, #60026, #41497, #4231 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662539819900, 0.0007090531776687532600 ), + .UNSPECIFIED. ) ; +#68904 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217490200, 71.43945992495501700, -28.34042301926910700 ) ) ; +#68905 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858902700, 77.92318720225479500, -28.70555803802997700 ) ) ; +#68906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68907 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 6.666666666666687400, -10.73183747965883100 ) ) ; +#68908 = FACE_OUTER_BOUND ( 'NONE', #46722, .T. ) ; +#68909 = CARTESIAN_POINT ( 'NONE', ( 10.03177803894799800, 90.28233213024626000, -28.25051428653864600 ) ) ; +#68910 = EDGE_CURVE ( 'NONE', #3092, #2137, #3461, .T. ) ; +#68911 = ORIENTED_EDGE ( 'NONE', *, *, #47, .F. ) ; +#68912 = ADVANCED_FACE ( 'NONE', ( #47231 ), #12237, .T. ) ; +#68913 = VERTEX_POINT ( 'NONE', #60690 ) ; +#68914 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#68915 = EDGE_CURVE ( 'NONE', #12878, #24421, #14187, .T. ) ; +#68916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68917 = CARTESIAN_POINT ( 'NONE', ( 16.74407751242512900, 6.510013420690184700, -28.08052970953932400 ) ) ; +#68918 = FACE_OUTER_BOUND ( 'NONE', #50119, .T. ) ; +#68919 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306341800, 10.09789380924876300, -28.25343951603340300 ) ) ; +#68920 = CARTESIAN_POINT ( 'NONE', ( -9.487278546916909900, 61.47860033657566700, -28.56001054660905300 ) ) ; +#68921 = EDGE_CURVE ( 'NONE', #75158, #71340, #53104, .T. ) ; +#68922 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68923 = ORIENTED_EDGE ( 'NONE', *, *, #51750, .F. ) ; +#68924 = ADVANCED_FACE ( 'NONE', ( #28822 ), #26827, .F. ) ; +#68925 = EDGE_CURVE ( 'NONE', #71731, #36688, #27065, .T. ) ; +#68926 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929801000, 65.79999999999971300, -28.70555803803047500 ) ) ; +#68927 = EDGE_CURVE ( 'NONE', #24430, #58752, #78428, .T. ) ; +#68928 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 41.16666666666667100, 3.794441961969996900 ) ) ; +#68929 = EDGE_CURVE ( 'NONE', #70845, #75366, #12596, .T. ) ; +#68930 = FACE_OUTER_BOUND ( 'NONE', #5031, .T. ) ; +#68931 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725307500, 45.55000000000000400, -28.20555803802996700 ) ) ; +#68932 = VERTEX_POINT ( 'NONE', #11184 ) ; +#68933 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471819800, 39.13131911501876200, -28.51286550264509100 ) ) ; +#68934 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906779700, 69.92963663972543000, -28.27338767626451600 ) ) ; +#68935 = ORIENTED_EDGE ( 'NONE', *, *, #58439, .T. ) ; +#68936 = CARTESIAN_POINT ( 'NONE', ( 16.87499050669594800, 90.50631431917726400, -28.32746852027543500 ) ) ; +#68937 = ORIENTED_EDGE ( 'NONE', *, *, #51746, .F. ) ; +#68938 = CARTESIAN_POINT ( 'NONE', ( 24.53347846121610900, 101.1334784612145900, -21.99586803407497700 ) ) ; +#68939 = ADVANCED_FACE ( 'NONE', ( #59932 ), #57959, .F. ) ; +#68940 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662744228000, 73.66464174796080000, -28.53896444442210300 ) ) ; +#68941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68942 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #43456, 'distance_accuracy_value', 'NONE'); +#68943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68944 = AXIS2_PLACEMENT_3D ( 'NONE', #49344, #36850, #74162 ) ; +#68945 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914520600, 89.77559325427189700, -28.45987523529578700 ) ) ; +#68946 = EDGE_CURVE ( 'NONE', #12694, #7748, #74518, .T. ) ; +#68947 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000048800, 80.69949493661160000, -28.70555803803030800 ) ) ; +#68948 = EDGE_CURVE ( 'NONE', #51254, #49911, #45265, .T. ) ; +#68949 = EDGE_CURVE ( 'NONE', #55230, #55877, #78931, .T. ) ; +#68950 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#68951 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527470900, 24.86071428647298700, -28.36868303842826900 ) ) ; +#68952 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68953 = PLANE ( 'NONE', #37070 ) ; +#68954 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003900, 71.30277574221145200, -28.32715733700507600 ) ) ; +#68955 = AXIS2_PLACEMENT_3D ( 'NONE', #45291, #76603, #39333 ) ; +#68956 = CIRCLE ( 'NONE', #27045, 10.50000000000009200 ) ; +#68957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68958 = CARTESIAN_POINT ( 'NONE', ( -15.32631446541100900, 44.40457788868503300, -28.70132697598340600 ) ) ; +#68959 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38350, #57152, #75903, #38615 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.170520653170729700E-016, 0.002676326193402645600 ), + .UNSPECIFIED. ) ; +#68960 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944362400, 49.30044153222989000, -28.38339015421980700 ) ) ; +#68961 = ORIENTED_EDGE ( 'NONE', *, *, #51611, .T. ) ; +#68962 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349246600, 29.20543520232828200, -28.70555803802994200 ) ) ; +#68963 = EDGE_LOOP ( 'NONE', ( #43913, #36433, #63291 ) ) ; +#68964 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#68965 = CARTESIAN_POINT ( 'NONE', ( -16.10512553857339000, 30.04666532841806500, -28.65803483468210500 ) ) ; +#68966 = AXIS2_PLACEMENT_3D ( 'NONE', #62392, #25134, #18865 ) ; +#68967 = AXIS2_PLACEMENT_3D ( 'NONE', #14370, #57885, #20636 ) ; +#68968 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.43250300240228500, -28.20555803802997700 ) ) ; +#68969 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000005800, 29.19949493661175700, -28.70555803802994200 ) ) ; +#68970 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 63.65857157145693200, -28.20555803802997700 ) ) ; +#68971 = LINE ( 'NONE', #9119, #21292 ) ; +#68972 = ORIENTED_EDGE ( 'NONE', *, *, #57757, .F. ) ; +#68973 = FACE_OUTER_BOUND ( 'NONE', #5059, .T. ) ; +#68974 = VERTEX_POINT ( 'NONE', #55475 ) ; +#68975 = ORIENTED_EDGE ( 'NONE', *, *, #10150, .T. ) ; +#68976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#68977 = VERTEX_POINT ( 'NONE', #11981 ) ; +#68978 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 47.50000000000000700, -9.258116921287651700 ) ) ; +#68979 = CIRCLE ( 'NONE', #23110, 10.00000000000009200 ) ; +#68980 = ORIENTED_EDGE ( 'NONE', *, *, #18885, .F. ) ; +#68981 = ORIENTED_EDGE ( 'NONE', *, *, #24945, .F. ) ; +#68982 = VERTEX_POINT ( 'NONE', #42952 ) ; +#68983 = ORIENTED_EDGE ( 'NONE', *, *, #40117, .F. ) ; +#68985 = VERTEX_POINT ( 'NONE', #36709 ) ; +#68984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#68986 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 12.66666666666667100, 1.294441961969997200 ) ) ; +#68987 = AXIS2_PLACEMENT_3D ( 'NONE', #68964, #43916, #31723 ) ; +#68988 = ORIENTED_EDGE ( 'NONE', *, *, #8264, .T. ) ; +#68989 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965600, 20.44069092601377900, -28.35186440610857200 ) ) ; +#68990 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44055, #37822, #56601, #19342 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648644926800E-007, 0.0007596411030278559100 ), + .UNSPECIFIED. ) ; +#68991 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 71.61077422949655600, -28.37255355648634100 ) ) ; +#68992 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#68993 = VERTEX_POINT ( 'NONE', #18230 ) ; +#68994 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919934000, 30.72294471194860000, -28.20555803802996700 ) ) ; +#68995 = CONICAL_SURFACE ( 'NONE', #3150, 10.00000000000009400, 0.7853981633974447300 ) ; +#68996 = ORIENTED_EDGE ( 'NONE', *, *, #41004, .T. ) ; +#68997 = ORIENTED_EDGE ( 'NONE', *, *, #43939, .F. ) ; +#68998 = ORIENTED_EDGE ( 'NONE', *, *, #9071, .T. ) ; +#68999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69000 = EDGE_CURVE ( 'NONE', #30080, #39227, #64473, .T. ) ; +#69001 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#69002 = EDGE_LOOP ( 'NONE', ( #18017, #16396, #41960 ) ) ; +#69003 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 15.00000000000001400, -1.205558038030002800 ) ) ; +#69004 = AXIS2_PLACEMENT_3D ( 'NONE', #79257, #54743, #79525 ) ; +#69005 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#69006 = CIRCLE ( 'NONE', #18754, 10.00000000000009400 ) ; +#69007 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69008 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950485600, 20.90771342879314100, -28.53891855579975000 ) ) ; +#69010 = ORIENTED_EDGE ( 'NONE', *, *, #76557, .T. ) ; +#69009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69011 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48175, #23471, #66990, #29757 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003298755638108212500, 0.0006040461757766355500 ), + .UNSPECIFIED. ) ; +#69012 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806990500, 66.79999999999964200, -28.70555803802997700 ) ) ; +#69013 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 47.89962244433175400, -28.53664883431610400 ) ) ; +#69014 = AXIS2_PLACEMENT_3D ( 'NONE', #5955, #12208, #43175 ) ; +#69015 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69016 = FACE_OUTER_BOUND ( 'NONE', #2395, .T. ) ; +#69017 = EDGE_LOOP ( 'NONE', ( #43777, #61669, #33236 ) ) ; +#69018 = ADVANCED_FACE ( 'NONE', ( #10280 ), #55996, .F. ) ; +#69019 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#69020 = CARTESIAN_POINT ( 'NONE', ( -1.266348137463069200E-013, 83.65857157145696000, -28.20555803803014400 ) ) ; +#69021 = ORIENTED_EDGE ( 'NONE', *, *, #63832, .T. ) ; +#69022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69023 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 89.63176086632793700, -28.70555803802997700 ) ) ; +#69025 = ORIENTED_EDGE ( 'NONE', *, *, #25730, .T. ) ; +#69024 = CARTESIAN_POINT ( 'NONE', ( -3.040273598549589000, 28.72437813624630500, -28.30310527599299100 ) ) ; +#69026 = ADVANCED_FACE ( 'NONE', ( #8291 ), #22921, .F. ) ; +#69027 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#69028 = AXIS2_PLACEMENT_3D ( 'NONE', #18872, #74392, #56127 ) ; +#69029 = ADVANCED_FACE ( 'NONE', ( #72580 ), #70588, .F. ) ; +#69030 = CARTESIAN_POINT ( 'NONE', ( -10.03178561562175600, 51.31767869357340600, -28.25052235028430300 ) ) ; +#69032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69031 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#69033 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701827100, 75.79999999999977000, -28.70555803803014400 ) ) ; +#69034 = EDGE_CURVE ( 'NONE', #75531, #65427, #49932, .T. ) ; +#69035 = CONICAL_SURFACE ( 'NONE', #2463, 10.00000000000009600, 0.7853981633974447300 ) ; +#69036 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 18.50000000000001400, -7.061964498581022400 ) ) ; +#69037 = CYLINDRICAL_SURFACE ( 'NONE', #56699, 10.00000000000000000 ) ; +#69038 = ORIENTED_EDGE ( 'NONE', *, *, #47815, .T. ) ; +#69039 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31894, #13153, #56622, #75412 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904317247900E-007, 0.0005865296644889221300 ), + .UNSPECIFIED. ) ; +#69040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69041 = ORIENTED_EDGE ( 'NONE', *, *, #66822, .F. ) ; +#69042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69043 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69045 = FACE_OUTER_BOUND ( 'NONE', #73206, .T. ) ; +#69046 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#69047 = VERTEX_POINT ( 'NONE', #18762 ) ; +#69048 = FACE_OUTER_BOUND ( 'NONE', #16290, .T. ) ; +#69049 = EDGE_LOOP ( 'NONE', ( #73978, #71971, #46558 ) ) ; +#69050 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841341200, 18.16349705304836000, -28.30782889147495100 ) ) ; +#69051 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#69053 = EDGE_CURVE ( 'NONE', #5802, #13600, #76446, .T. ) ; +#69052 = ORIENTED_EDGE ( 'NONE', *, *, #43068, .T. ) ; +#69054 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 31.28933626866496500, -28.53923937255171600 ) ) ; +#69055 = EDGE_CURVE ( 'NONE', #57348, #22543, #6363, .T. ) ; +#69056 = EDGE_LOOP ( 'NONE', ( #27125, #46240, #52088, #76855 ) ) ; +#69057 = CONICAL_SURFACE ( 'NONE', #79341, 10.00000000000009400, 0.7853981633974447300 ) ; +#69058 = EDGE_LOOP ( 'NONE', ( #12507, #62027, #41966, #50479 ) ) ; +#69059 = ORIENTED_EDGE ( 'NONE', *, *, #23575, .F. ) ; +#69060 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69061 = ORIENTED_EDGE ( 'NONE', *, *, #41999, .T. ) ; +#69062 = ORIENTED_EDGE ( 'NONE', *, *, #38233, .F. ) ; +#69063 = PLANE ( 'NONE', #17157 ) ; +#69064 = ORIENTED_EDGE ( 'NONE', *, *, #20709, .F. ) ; +#69065 = ORIENTED_EDGE ( 'NONE', *, *, #7558, .T. ) ; +#69066 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 10.12753447840889900, -28.38801640354855500 ) ) ; +#69067 = ORIENTED_EDGE ( 'NONE', *, *, #68344, .T. ) ; +#69068 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736728200, 35.04999999999995500, -28.70555803802995200 ) ) ; +#69069 = AXIS2_PLACEMENT_3D ( 'NONE', #15930, #59457, #22188 ) ; +#69070 = ORIENTED_EDGE ( 'NONE', *, *, #32240, .T. ) ; +#69071 = EDGE_CURVE ( 'NONE', #42951, #77479, #43344, .T. ) ; +#69072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#69073 = EDGE_CURVE ( 'NONE', #36921, #22471, #35543, .T. ) ; +#69074 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69075 = EDGE_CURVE ( 'NONE', #15206, #24370, #21076, .T. ) ; +#69076 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 26.89962244433175800, -28.53664883431607900 ) ) ; +#69077 = CONICAL_SURFACE ( 'NONE', #59429, 10.50000000000009600, 0.7853981633974500600 ) ; +#69078 = AXIS2_PLACEMENT_3D ( 'NONE', #26980, #64252, #70461 ) ; +#69079 = ORIENTED_EDGE ( 'NONE', *, *, #54173, .F. ) ; +#69080 = EDGE_LOOP ( 'NONE', ( #51334, #6318, #5831 ) ) ; +#69081 = CARTESIAN_POINT ( 'NONE', ( 4.766907343690295600, 65.79999999999950000, -28.70555803803030800 ) ) ; +#69082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69083 = ORIENTED_EDGE ( 'NONE', *, *, #32849, .T. ) ; +#69084 = ORIENTED_EDGE ( 'NONE', *, *, #18521, .F. ) ; +#69085 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489900, 81.43945992495517300, -28.34042301926894000 ) ) ; +#69086 = CIRCLE ( 'NONE', #9792, 9.500000000000097700 ) ; +#69087 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 62.16666666666666400, -6.205558038030004800 ) ) ; +#69088 = AXIS2_PLACEMENT_3D ( 'NONE', #8920, #52443, #15215 ) ; +#69089 = ORIENTED_EDGE ( 'NONE', *, *, #28482, .T. ) ; +#69090 = AXIS2_PLACEMENT_3D ( 'NONE', #70677, #33421, #76938 ) ; +#69091 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#69092 = EDGE_LOOP ( 'NONE', ( #21640, #64293, #51200, #16551, #25595 ) ) ; +#69093 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51225, #7738, #70031, #32771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849845500, 0.0007596411030280993200 ), + .UNSPECIFIED. ) ; +#69094 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 60.34267608797601700, -28.20555803802997700 ) ) ; +#69095 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 27.16666666666666100, -9.205558038030003900 ) ) ; +#69096 = CARTESIAN_POINT ( 'NONE', ( -16.42212147481431800, 30.98660297389124500, -28.58281552184495300 ) ) ; +#69097 = CONICAL_SURFACE ( 'NONE', #12910, 10.50000000000009400, 0.7853981633974500600 ) ; +#69098 = EDGE_LOOP ( 'NONE', ( #1073, #13870, #10383, #78070 ) ) ; +#69099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69101 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 64.50000000000001400, 6.847000845227641200 ) ) ; +#69102 = ORIENTED_EDGE ( 'NONE', *, *, #62175, .T. ) ; +#69103 = CARTESIAN_POINT ( 'NONE', ( -4.720904428264016200, 51.50050415885243600, -28.63287458792238000 ) ) ; +#69104 = EDGE_CURVE ( 'NONE', #14293, #5512, #6587, .T. ) ; +#69105 = ADVANCED_FACE ( 'NONE', ( #39450 ), #68653, .F. ) ; +#69106 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 42.97376207875059600, -28.70555803802997700 ) ) ; +#69107 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69108 = CIRCLE ( 'NONE', #13599, 10.00000000000009200 ) ; +#69109 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 20.43250300240229200, -28.20555803802995200 ) ) ; +#69110 = EDGE_CURVE ( 'NONE', #35308, #53626, #72932, .T. ) ; +#69111 = VERTEX_POINT ( 'NONE', #50527 ) ; +#69112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69113 = ORIENTED_EDGE ( 'NONE', *, *, #29547, .T. ) ; +#69114 = AXIS2_PLACEMENT_3D ( 'NONE', #20542, #64072, #26803 ) ; +#69115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69116 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100945900, 10.47636006919872600, -28.38670679782144300 ) ) ; +#69117 = CARTESIAN_POINT ( 'NONE', ( 15.32689004915739300, 25.69458663502700100, -28.70129965917120200 ) ) ; +#69118 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180778700, 51.65075715145311400, -28.20555803802997700 ) ) ; +#69119 = ADVANCED_FACE ( 'NONE', ( #54045 ), #35578, .F. ) ; +#69120 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116424500, 9.894351187922357100, -28.41114655922298500 ) ) ; +#69121 = CARTESIAN_POINT ( 'NONE', ( -3.360598542614460900, 39.16749699759768800, -28.25434854811489100 ) ) ; +#69122 = FACE_OUTER_BOUND ( 'NONE', #32844, .T. ) ; +#69123 = CARTESIAN_POINT ( 'NONE', ( 10.50047940280164300, 50.90033558196071800, -28.70555803803030800 ) ) ; +#69124 = ORIENTED_EDGE ( 'NONE', *, *, #19513, .F. ) ; +#69125 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#69126 = AXIS2_PLACEMENT_3D ( 'NONE', #77810, #46770, #71562 ) ; +#69127 = ORIENTED_EDGE ( 'NONE', *, *, #38158, .T. ) ; +#69128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69129 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 41.49769010897086500, -28.61774594594330900 ) ) ; +#69130 = FACE_OUTER_BOUND ( 'NONE', #54118, .T. ) ; +#69131 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260079500, 61.39965687931104600, -28.70555803803001300 ) ) ; +#69132 = ORIENTED_EDGE ( 'NONE', *, *, #62636, .F. ) ; +#69133 = ORIENTED_EDGE ( 'NONE', *, *, #11780, .T. ) ; +#69135 = ORIENTED_EDGE ( 'NONE', *, *, #79194, .F. ) ; +#69134 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69136 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73806, #55020, #80052, #42771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.195984522899319700E-017, 0.002676326193402428300 ), + .UNSPECIFIED. ) ; +#69137 = EDGE_LOOP ( 'NONE', ( #25013, #27648, #44728, #42764 ) ) ; +#69138 = ORIENTED_EDGE ( 'NONE', *, *, #76842, .T. ) ; +#69139 = ORIENTED_EDGE ( 'NONE', *, *, #9087, .F. ) ; +#69140 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#69141 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 19.29999999999992300, -28.70555803803009500 ) ) ; +#69142 = CARTESIAN_POINT ( 'NONE', ( 2.042760264135989400, 65.79999999999998300, -28.53819074160730600 ) ) ; +#69143 = AXIS2_PLACEMENT_3D ( 'NONE', #34809, #16299, #3759 ) ; +#69144 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 73.67681279774500100, -28.70555803802997700 ) ) ; +#69145 = ADVANCED_FACE ( 'NONE', ( #4412 ), #2444, .F. ) ; +#69146 = ORIENTED_EDGE ( 'NONE', *, *, #35594, .F. ) ; +#69147 = CIRCLE ( 'NONE', #75033, 10.00000000000009200 ) ; +#69148 = EDGE_CURVE ( 'NONE', #2143, #32815, #19000, .T. ) ; +#69149 = ORIENTED_EDGE ( 'NONE', *, *, #11782, .T. ) ; +#69150 = ORIENTED_EDGE ( 'NONE', *, *, #20004, .F. ) ; +#69151 = EDGE_LOOP ( 'NONE', ( #24528, #8940, #18406, #40141 ) ) ; +#69152 = VERTEX_POINT ( 'NONE', #7288 ) ; +#69153 = ORIENTED_EDGE ( 'NONE', *, *, #39989, .F. ) ; +#69154 = ORIENTED_EDGE ( 'NONE', *, *, #57141, .T. ) ; +#69155 = LINE ( 'NONE', #42419, #52592 ) ; +#69156 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 33.16666666666667900, -3.349151577478988200 ) ) ; +#69157 = ORIENTED_EDGE ( 'NONE', *, *, #28602, .F. ) ; +#69158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69159 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112215300, 30.52667319908790200, -28.37233769390156400 ) ) ; +#69160 = EDGE_CURVE ( 'NONE', #78383, #32526, #41400, .T. ) ; +#69161 = FACE_OUTER_BOUND ( 'NONE', #29617, .T. ) ; +#69163 = ORIENTED_EDGE ( 'NONE', *, *, #22975, .T. ) ; +#69162 = PLANE ( 'NONE', #46372 ) ; +#69164 = EDGE_CURVE ( 'NONE', #3478, #78678, #20989, .T. ) ; +#69165 = ORIENTED_EDGE ( 'NONE', *, *, #16177, .T. ) ; +#69166 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189905600, 10.47636006919873400, -28.38670679782144600 ) ) ; +#69167 = AXIS2_PLACEMENT_3D ( 'NONE', #16085, #59611, #22339 ) ; +#69168 = EDGE_CURVE ( 'NONE', #65965, #7287, #58446, .T. ) ; +#69169 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 59.91070809551060700, -28.20555803802997700 ) ) ; +#69170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25125, #31126, #37597, #344 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.098559714723532500E-007, 0.0005869108620980701800 ), + .UNSPECIFIED. ) ; +#69171 = CARTESIAN_POINT ( 'NONE', ( -17.26470821603527400, 49.31701335568625000, -28.44647976475484400 ) ) ; +#69172 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 4.500000000000002700, 6.847000845227646500 ) ) ; +#69173 = EDGE_CURVE ( 'NONE', #6871, #55084, #37480, .T. ) ; +#69174 = AXIS2_PLACEMENT_3D ( 'NONE', #54018, #42569, #79870 ) ; +#69175 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69176 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69177 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21611, #27876, #3069, #46568 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.466445206649001200E-005, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#69178 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819213700, 71.65075715145309200, -28.20555803802997700 ) ) ; +#69179 = VERTEX_POINT ( 'NONE', #32594 ) ; +#69180 = ORIENTED_EDGE ( 'NONE', *, *, #17933, .F. ) ; +#69181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#69182 = CARTESIAN_POINT ( 'NONE', ( 18.17231944135600900, 3.654101982772540900, -26.44051805342625600 ) ) ; +#69183 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 12.15857157145701000, -28.20555803802994200 ) ) ; +#69184 = ORIENTED_EDGE ( 'NONE', *, *, #27773, .F. ) ; +#69185 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67696, #36668, #55429, #18183 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287113152400E-007, 0.0007303759720927695700 ), + .UNSPECIFIED. ) ; +#69186 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819353600, 69.94924284854693000, -28.20555803802997700 ) ) ; +#69187 = AXIS2_PLACEMENT_3D ( 'NONE', #34712, #78224, #40952 ) ; +#69188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69189 = AXIS2_PLACEMENT_3D ( 'NONE', #23940, #5430, #48911 ) ; +#69190 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846553900, 90.79999999999982700, -28.55171188418368200 ) ) ; +#69191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69192 = EDGE_CURVE ( 'NONE', #15757, #13621, #43946, .T. ) ; +#69193 = EDGE_CURVE ( 'NONE', #50347, #70148, #29567, .T. ) ; +#69194 = ADVANCED_FACE ( 'NONE', ( #50109 ), #64783, .F. ) ; +#69195 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 9.932503002402292200, -28.20555803802994200 ) ) ; +#69196 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17844, #36583, #42842, #5593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690562570100E-007, 0.0007331055842534744400 ), + .UNSPECIFIED. ) ; +#69198 = AXIS2_PLACEMENT_3D ( 'NONE', #21386, #64920, #27649 ) ; +#69197 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999988000, 17.98922577050330700, -28.37255355648640500 ) ) ; +#69199 = CIRCLE ( 'NONE', #6973, 10.00000000000009200 ) ; +#69200 = ORIENTED_EDGE ( 'NONE', *, *, #35762, .F. ) ; +#69201 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69202 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ; +#69203 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 39.00000000000000000, -6.205558038030003100 ) ) ; +#69204 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715600, 70.34267608797551900, -28.20555803803014400 ) ) ; +#69205 = ORIENTED_EDGE ( 'NONE', *, *, #2195, .T. ) ; +#69206 = CIRCLE ( 'NONE', #71965, 10.50000000000009600 ) ; +#69207 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#69208 = ORIENTED_EDGE ( 'NONE', *, *, #35820, .F. ) ; +#69209 = ORIENTED_EDGE ( 'NONE', *, *, #52852, .T. ) ; +#69210 = EDGE_LOOP ( 'NONE', ( #45001, #75142, #79442 ) ) ; +#69211 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 90.07141756547859800, -28.70555803803030800 ) ) ; +#69213 = VERTEX_POINT ( 'NONE', #45334 ) ; +#69212 = EDGE_CURVE ( 'NONE', #69573, #63349, #17079, .T. ) ; +#69214 = CARTESIAN_POINT ( 'NONE', ( 19.21799876944743300, 100.0359975388949900, -24.10539221927591700 ) ) ; +#69215 = ADVANCED_FACE ( 'NONE', ( #66712 ), #15108, .T. ) ; +#69216 = CARTESIAN_POINT ( 'NONE', ( 3.655978610610833200, 8.107395204316864200, -28.54957942741934200 ) ) ; +#69217 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#69218 = AXIS2_PLACEMENT_3D ( 'NONE', #10172, #53672, #16428 ) ; +#69219 = CARTESIAN_POINT ( 'NONE', ( 18.01499697187775300, 81.60186521182760100, -28.24089224568519900 ) ) ; +#69220 = AXIS2_PLACEMENT_3D ( 'NONE', #75281, #69284, #63052 ) ; +#69221 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#69222 = FACE_OUTER_BOUND ( 'NONE', #47582, .T. ) ; +#69223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69225 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489900, 81.43945992495517300, -28.34042301926894000 ) ) ; +#69226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69227 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725303000, 34.73212903577621100, -28.37244029424744300 ) ) ; +#69228 = CARTESIAN_POINT ( 'NONE', ( 3.628494729608041000, 51.43250300240212200, -28.25053119339294800 ) ) ; +#69229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69230 = CONICAL_SURFACE ( 'NONE', #4612, 10.00000000000009200, 0.7853981633974447300 ) ; +#69231 = ORIENTED_EDGE ( 'NONE', *, *, #45535, .F. ) ; +#69232 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#69233 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69234 = ADVANCED_FACE ( 'NONE', ( #52064 ), #8351, .T. ) ; +#69235 = ORIENTED_EDGE ( 'NONE', *, *, #66676, .T. ) ; +#69236 = ADVANCED_FACE ( 'NONE', ( #33606 ), #46219, .T. ) ; +#69237 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466626800, 40.76893971291461600, -28.57333386111660500 ) ) ; +#69238 = ORIENTED_EDGE ( 'NONE', *, *, #39025, .F. ) ; +#69239 = EDGE_LOOP ( 'NONE', ( #40881, #32876, #19900 ) ) ; +#69240 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#69241 = EDGE_LOOP ( 'NONE', ( #38185, #16358, #68611, #35050 ) ) ; +#69242 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 80.13716795162658000, -28.48697406221667800 ) ) ; +#69243 = FACE_OUTER_BOUND ( 'NONE', #79680, .T. ) ; +#69244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69245 = CARTESIAN_POINT ( 'NONE', ( -2.760105492672012800, 61.93585231025930700, -28.38420446581281500 ) ) ; +#69246 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957525000, 27.50972971738994100, -28.70555803802994500 ) ) ; +#69247 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69248 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58160, #51868, #8355, #64457 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276782350400E-007, 0.0007677744771234664300 ), + .UNSPECIFIED. ) ; +#69249 = CARTESIAN_POINT ( 'NONE', ( -3.483152803492443300, 19.89456479767167400, -28.70555803802994200 ) ) ; +#69250 = ADVANCED_FACE ( 'NONE', ( #31667 ), #13183, .F. ) ; +#69251 = AXIS2_PLACEMENT_3D ( 'NONE', #31684, #62688, #37906 ) ; +#69252 = CIRCLE ( 'NONE', #77950, 10.00000000000009600 ) ; +#69253 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 45.33333333333334300, 8.320721403598817300 ) ) ; +#69254 = ORIENTED_EDGE ( 'NONE', *, *, #27640, .F. ) ; +#69255 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 36.60073525436785500, -28.70555803802995200 ) ) ; +#69256 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 10.49999999999999800, -4.865812075874393000 ) ) ; +#69257 = AXIS2_PLACEMENT_3D ( 'NONE', #27123, #58114, #33360 ) ; +#69258 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#69259 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686889300, 80.01994747561646200, -28.24986299608865200 ) ) ; +#69260 = EDGE_CURVE ( 'NONE', #4132, #42191, #15072, .T. ) ; +#69261 = AXIS2_PLACEMENT_3D ( 'NONE', #52599, #15371, #58870 ) ; +#69262 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 12.83333333333334100, 1.741883078712340300 ) ) ; +#69263 = ORIENTED_EDGE ( 'NONE', *, *, #26557, .F. ) ; +#69264 = ORIENTED_EDGE ( 'NONE', *, *, #36180, .T. ) ; +#69265 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428572400, 43.67681279774500800, -28.70555803802997700 ) ) ; +#69266 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#69267 = CARTESIAN_POINT ( 'NONE', ( -16.99797127827573500, 30.81091476818473800, -28.25432823872346000 ) ) ; +#69268 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69270 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#69271 = FACE_OUTER_BOUND ( 'NONE', #66339, .T. ) ; +#69272 = VERTEX_POINT ( 'NONE', #64718 ) ; +#69273 = ORIENTED_EDGE ( 'NONE', *, *, #31741, .F. ) ; +#69274 = CARTESIAN_POINT ( 'NONE', ( 15.65360307894354200, 92.90720723963164600, -28.61976886787521200 ) ) ; +#69275 = EDGE_CURVE ( 'NONE', #5765, #64284, #588, .T. ) ; +#69276 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#69277 = CIRCLE ( 'NONE', #47361, 10.50000000000009900 ) ; +#69278 = EDGE_CURVE ( 'NONE', #48083, #69715, #66937, .T. ) ; +#69279 = EDGE_LOOP ( 'NONE', ( #42172, #49264, #11099, #30405 ) ) ; +#69280 = CARTESIAN_POINT ( 'NONE', ( -19.77473233005076700, 0.4504337763652155900, -21.67952678336682500 ) ) ; +#69281 = ORIENTED_EDGE ( 'NONE', *, *, #48149, .F. ) ; +#69282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69283 = VERTEX_POINT ( 'NONE', #39930 ) ; +#69284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#69285 = ORIENTED_EDGE ( 'NONE', *, *, #12220, .F. ) ; +#69286 = CONICAL_SURFACE ( 'NONE', #21816, 10.00000000000009400, 0.7853981633974447300 ) ; +#69287 = EDGE_CURVE ( 'NONE', #6774, #60567, #29746, .T. ) ; +#69288 = ADVANCED_FACE ( 'NONE', ( #24874 ), #44254, .F. ) ; +#69289 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#69290 = EDGE_CURVE ( 'NONE', #33093, #15453, #60874, .T. ) ; +#69291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68472, #24953, #20089, #63609 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.208640909905172300E-016, 0.001179148174662244600 ), + .UNSPECIFIED. ) ; +#69292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69293 = ORIENTED_EDGE ( 'NONE', *, *, #54412, .F. ) ; +#69294 = AXIS2_PLACEMENT_3D ( 'NONE', #75125, #62624, #31626 ) ; +#69295 = CONICAL_SURFACE ( 'NONE', #17616, 10.00000000000009200, 0.7853981633974415100 ) ; +#69296 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 16.33333333333333900, 2.794441961969998300 ) ) ; +#69297 = VERTEX_POINT ( 'NONE', #52690 ) ; +#69298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69299 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428622700, 28.57141756547896000, -28.70555803802994200 ) ) ; +#69300 = ORIENTED_EDGE ( 'NONE', *, *, #64582, .F. ) ; +#69301 = VERTEX_POINT ( 'NONE', #40186 ) ; +#69302 = CYLINDRICAL_SURFACE ( 'NONE', #47060, 5.000000000000000900 ) ; +#69303 = VERTEX_POINT ( 'NONE', #71479 ) ; +#69304 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783890900, 90.16749699759738200, -28.23966044827393100 ) ) ; +#69305 = FACE_OUTER_BOUND ( 'NONE', #10866, .T. ) ; +#69306 = CARTESIAN_POINT ( 'NONE', ( 10.95973104149358700, 30.87561462481245300, -28.30309985153375200 ) ) ; +#69307 = ADVANCED_FACE ( 'NONE', ( #498 ), #75441, .F. ) ; +#69308 = AXIS2_PLACEMENT_3D ( 'NONE', #47271, #41046, #3763 ) ; +#69309 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 70.10230989102910800, -28.61774594594330900 ) ) ; +#69310 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41597, #60401, #79155, #41860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#69311 = EDGE_CURVE ( 'NONE', #27571, #5994, #52430, .T. ) ; +#69312 = EDGE_CURVE ( 'NONE', #71559, #19874, #77391, .T. ) ; +#69313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69314 = EDGE_CURVE ( 'NONE', #58433, #11374, #11226, .T. ) ; +#69315 = AXIS2_PLACEMENT_3D ( 'NONE', #61486, #24212, #67716 ) ; +#69316 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 59.98922577050341000, -28.37255355648634500 ) ) ; +#69317 = AXIS2_PLACEMENT_3D ( 'NONE', #36494, #80041, #42757 ) ; +#69318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69319 = CONICAL_SURFACE ( 'NONE', #49203, 10.00000000000009200, 0.7853981633974447300 ) ; +#69320 = ORIENTED_EDGE ( 'NONE', *, *, #69503, .T. ) ; +#69321 = ADVANCED_FACE ( 'NONE', ( #62821 ), #9234, .T. ) ; +#69322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14639, #14365, #27153, #70647 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001179148174662953500 ), + .UNSPECIFIED. ) ; +#69323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69324 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#69325 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 41.24660241562190100, -28.20555803802996700 ) ) ; +#69326 = EDGE_CURVE ( 'NONE', #78782, #10311, #37978, .T. ) ; +#69327 = AXIS2_PLACEMENT_3D ( 'NONE', #70236, #32980, #76490 ) ; +#69328 = AXIS2_PLACEMENT_3D ( 'NONE', #78029, #40754, #3479 ) ; +#69329 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571400400, 60.07141756547891700, -28.70555803802997700 ) ) ; +#69330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26749, #70232, #32977, #76487 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191440980000E-007, 0.0006649560044144007800 ), + .UNSPECIFIED. ) ; +#69331 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69332 = ADVANCED_FACE ( 'NONE', ( #79360 ), #56949, .F. ) ; +#69333 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#69334 = ORIENTED_EDGE ( 'NONE', *, *, #22022, .F. ) ; +#69335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69336 = ORIENTED_EDGE ( 'NONE', *, *, #6640, .T. ) ; +#69337 = ADVANCED_FACE ( 'NONE', ( #27787 ), #23877, .F. ) ; +#69338 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 60.00000000000001400, 3.794441961969998300 ) ) ; +#69339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69340 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567151000, 39.35339758437810800, -28.20555803802995200 ) ) ; +#69341 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 25.00000000000000700, 6.794441961969995200 ) ) ; +#69342 = FACE_OUTER_BOUND ( 'NONE', #36844, .T. ) ; +#69343 = AXIS2_PLACEMENT_3D ( 'NONE', #78519, #35270, #78785 ) ; +#69344 = ORIENTED_EDGE ( 'NONE', *, *, #51519, .T. ) ; +#69345 = CARTESIAN_POINT ( 'NONE', ( 16.81107998338503900, 41.60677350908861900, -28.30799595738892500 ) ) ; +#69346 = CIRCLE ( 'NONE', #30063, 10.50000000000009600 ) ; +#69347 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, 89.63176086632761000, -28.70555803803030800 ) ) ; +#69348 = ORIENTED_EDGE ( 'NONE', *, *, #49382, .F. ) ; +#69349 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310703400, 70.10230989102889500, -28.61774594594300700 ) ) ; +#69350 = ORIENTED_EDGE ( 'NONE', *, *, #33978, .F. ) ; +#69351 = CIRCLE ( 'NONE', #37643, 10.00000000000009600 ) ; +#69352 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 62.33333333333335000, -10.73183747965883100 ) ) ; +#69353 = VERTEX_POINT ( 'NONE', #28812 ) ; +#69354 = ORIENTED_EDGE ( 'NONE', *, *, #52851, .F. ) ; +#69355 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898058200, 80.38105266879262000, -28.33409528117009700 ) ) ; +#69356 = AXIS2_PLACEMENT_3D ( 'NONE', #38415, #1178, #44651 ) ; +#69357 = FACE_OUTER_BOUND ( 'NONE', #14739, .T. ) ; +#69358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69359 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33194, #70442, #64512, #27231 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081983421000E-007, 0.001119323292485552500 ), + .UNSPECIFIED. ) ; +#69360 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155513200, 65.79999999999968500, -28.20555803803030800 ) ) ; +#69361 = EDGE_CURVE ( 'NONE', #60061, #47124, #48165, .T. ) ; +#69362 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000048000, 18.36203212531224300, -28.38801640354843800 ) ) ; +#69363 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69364 = ORIENTED_EDGE ( 'NONE', *, *, #32826, .F. ) ; +#69365 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#69366 = FACE_OUTER_BOUND ( 'NONE', #25760, .T. ) ; +#69367 = AXIS2_PLACEMENT_3D ( 'NONE', #51850, #14642, #58148 ) ; +#69368 = ORIENTED_EDGE ( 'NONE', *, *, #58925, .T. ) ; +#69369 = CARTESIAN_POINT ( 'NONE', ( -10.01424819686889300, 70.01994747561646200, -28.24986299608865200 ) ) ; +#69370 = PLANE ( 'NONE', #73930 ) ; +#69371 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832100, 81.25732391202397800, -28.20555803802997700 ) ) ; +#69372 = ORIENTED_EDGE ( 'NONE', *, *, #5828, .F. ) ; +#69373 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 10.06248377813469700, -28.32723995587607000 ) ) ; +#69374 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#69375 = VERTEX_POINT ( 'NONE', #35046 ) ; +#69376 = CARTESIAN_POINT ( 'NONE', ( 4.124991665269825500, 51.58737389638846300, -28.29936525552462000 ) ) ; +#69377 = CIRCLE ( 'NONE', #43387, 9.500000000000095900 ) ; +#69378 = EDGE_LOOP ( 'NONE', ( #49315, #35457, #52564, #49435 ) ) ; +#69379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69380 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 41.78933626866496100, -28.53923937255172300 ) ) ; +#69381 = CONICAL_SURFACE ( 'NONE', #29972, 10.00000000000009600, 0.7853981633974447300 ) ; +#69382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69383 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69385 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69386 = ORIENTED_EDGE ( 'NONE', *, *, #71687, .T. ) ; +#69387 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171865800, 51.13768531620308300, -28.37082013777847000 ) ) ; +#69388 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 55.79999999999999000, -28.20555803802997700 ) ) ; +#69389 = EDGE_CURVE ( 'NONE', #72521, #78943, #23540, .T. ) ; +#69390 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 65.83333333333334300, 0.9380355014189731800 ) ) ; +#69391 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655593200, 49.42298334620760900, -28.20555803802997400 ) ) ; +#69392 = CONICAL_SURFACE ( 'NONE', #70564, 10.50000000000009600, 0.7853981633974500600 ) ; +#69393 = VERTEX_POINT ( 'NONE', #72309 ) ; +#69394 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69395 = CONICAL_SURFACE ( 'NONE', #74807, 10.00000000000009200, 0.7853981633974447300 ) ; +#69396 = EDGE_CURVE ( 'NONE', #9849, #76201, #40385, .T. ) ; +#69397 = CARTESIAN_POINT ( 'NONE', ( 11.12499166526929200, 60.01262610361168000, -28.29936525552458800 ) ) ; +#69398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69399 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666200, 71.46283204837337200, -28.48697406221659600 ) ) ; +#69400 = PLANE ( 'NONE', #24885 ) ; +#69401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62458, #18918, #25186, #68699 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823693209261600E-007, 0.0008724363063898880500 ), + .UNSPECIFIED. ) ; +#69403 = EDGE_CURVE ( 'NONE', #23125, #16097, #9047, .T. ) ; +#69404 = EDGE_CURVE ( 'NONE', #14906, #19508, #58887, .T. ) ; +#69405 = AXIS2_PLACEMENT_3D ( 'NONE', #8307, #2316, #70604 ) ; +#69406 = EDGE_CURVE ( 'NONE', #22200, #6790, #75411, .T. ) ; +#69407 = ADVANCED_FACE ( 'NONE', ( #42329 ), #21909, .F. ) ; +#69408 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472986000, 18.13131911501867700, -28.51286550264547200 ) ) ; +#69409 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42314, #5072, #61132, #23864 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711401893100E-007, 0.0008482615949373525300 ), + .UNSPECIFIED. ) ; +#69410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69411 = VERTEX_POINT ( 'NONE', #54310 ) ; +#69412 = ADVANCED_FACE ( 'NONE', ( #73498 ), #69578, .T. ) ; +#69413 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 31.00000000000000700, -1.205558038030005300 ) ) ; +#69414 = AXIS2_PLACEMENT_3D ( 'NONE', #60138, #10351, #66388 ) ; +#69416 = ORIENTED_EDGE ( 'NONE', *, *, #42721, .F. ) ; +#69415 = EDGE_CURVE ( 'NONE', #57367, #77167, #5361, .T. ) ; +#69417 = EDGE_CURVE ( 'NONE', #71722, #62964, #54981, .T. ) ; +#69418 = EDGE_CURVE ( 'NONE', #6326, #12788, #7281, .T. ) ; +#69419 = CARTESIAN_POINT ( 'NONE', ( -11.76690734369020100, 55.79999999999999000, -28.70555803802997700 ) ) ; +#69420 = ADVANCED_FACE ( 'NONE', ( #25825 ), #67646, .T. ) ; +#69421 = CONICAL_SURFACE ( 'NONE', #22500, 10.50000000000009400, 0.7853981633974482800 ) ; +#69422 = ORIENTED_EDGE ( 'NONE', *, *, #74586, .F. ) ; +#69423 = FACE_OUTER_BOUND ( 'NONE', #4835, .T. ) ; +#69424 = VERTEX_POINT ( 'NONE', #11355 ) ; +#69425 = AXIS2_PLACEMENT_3D ( 'NONE', #31461, #56448, #6674 ) ; +#69426 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806990500, 76.79999999999962800, -28.70555803802997700 ) ) ; +#69427 = CIRCLE ( 'NONE', #60572, 10.00000000000009200 ) ; +#69428 = ORIENTED_EDGE ( 'NONE', *, *, #21038, .F. ) ; +#69429 = ORIENTED_EDGE ( 'NONE', *, *, #40832, .T. ) ; +#69430 = EDGE_CURVE ( 'NONE', #7884, #16279, #60955, .T. ) ; +#69431 = AXIS2_PLACEMENT_3D ( 'NONE', #4318, #47804, #10584 ) ; +#69432 = ORIENTED_EDGE ( 'NONE', *, *, #34871, .T. ) ; +#69433 = AXIS2_PLACEMENT_3D ( 'NONE', #30053, #73540, #36261 ) ; +#69434 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112216100, 41.02667319908789500, -28.37233769390157100 ) ) ; +#69435 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 39.07141756547892400, -28.70555803802995200 ) ) ; +#69436 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 2.333333333333339300, -6.705558038030005700 ) ) ; +#69437 = CIRCLE ( 'NONE', #71723, 10.00000000000009400 ) ; +#69438 = VERTEX_POINT ( 'NONE', #54840 ) ; +#69439 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69440 = FACE_OUTER_BOUND ( 'NONE', #23961, .T. ) ; +#69441 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811657200, 18.20564881207769800, -28.41114655922286000 ) ) ; +#69442 = EDGE_LOOP ( 'NONE', ( #5047, #42822, #55708, #3589 ) ) ; +#69443 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512263400, 81.99560977511677600, -28.70555803802997700 ) ) ; +#69444 = EDGE_LOOP ( 'NONE', ( #4877, #2844, #25193, #1508 ) ) ; +#69445 = EDGE_LOOP ( 'NONE', ( #49581, #7930, #74643 ) ) ; +#69446 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69447 = CARTESIAN_POINT ( 'NONE', ( 19.36914419024513700, 1.260973545293312800, -23.57684582554235000 ) ) ; +#69448 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#69449 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#69450 = ORIENTED_EDGE ( 'NONE', *, *, #31860, .T. ) ; +#69451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#69452 = FACE_OUTER_BOUND ( 'NONE', #4306, .T. ) ; +#69453 = AXIS2_PLACEMENT_3D ( 'NONE', #41623, #47591, #29442 ) ; +#69454 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#69455 = CARTESIAN_POINT ( 'NONE', ( -16.42208926844538700, 18.11339344823292700, -28.58282679407403400 ) ) ; +#69456 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 29.02242369685794200, -28.53861367218590300 ) ) ; +#69457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2083, #2344, #21157, #64681 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723668700, 0.0008252574424211208200 ), + .UNSPECIFIED. ) ; +#69458 = CARTESIAN_POINT ( 'NONE', ( 13.52370513372562400, 15.93535825203869600, -28.53896444442244700 ) ) ; +#69459 = ORIENTED_EDGE ( 'NONE', *, *, #44003, .F. ) ; +#69460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69461 = VERTEX_POINT ( 'NONE', #30135 ) ; +#69462 = AXIS2_PLACEMENT_3D ( 'NONE', #47170, #9948, #53467 ) ; +#69463 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709909800, 10.03732497909458700, -28.41043597897465400 ) ) ; +#69464 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69465 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 36.83333333333335000, 3.794441961969996900 ) ) ; +#69466 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#69467 = ORIENTED_EDGE ( 'NONE', *, *, #17476, .F. ) ; +#69468 = EDGE_CURVE ( 'NONE', #26055, #167, #3382, .T. ) ; +#69469 = CIRCLE ( 'NONE', #15366, 9.500000000000099500 ) ; +#69470 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69471 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823696000, 17.19543746431594000, -28.61277292027076400 ) ) ; +#69472 = AXIS2_PLACEMENT_3D ( 'NONE', #61515, #24232, #67748 ) ; +#69473 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 47.44142842854296300, -28.20555803802996700 ) ) ; +#69474 = CARTESIAN_POINT ( 'NONE', ( 20.67774180416269700, 94.43887090208090700, -26.95707375742634300 ) ) ; +#69475 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252842800, 28.63131911501858400, -28.51286550264480000 ) ) ; +#69476 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155229900, 55.80000000000015300, -28.20555803803030800 ) ) ; +#69477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69478 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.16749699759769500, -28.20555803802997700 ) ) ; +#69479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69480 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#69481 = CARTESIAN_POINT ( 'NONE', ( 4.684165681787351100E-015, 58.39962244433176200, -28.53664883431611800 ) ) ; +#69482 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310462200, 39.10230989102910100, -28.61774594594333000 ) ) ; +#69483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69484 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#69485 = AXIS2_PLACEMENT_3D ( 'NONE', #65408, #28151, #71638 ) ; +#69486 = CIRCLE ( 'NONE', #71670, 10.50000000000009600 ) ; +#69487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69488 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#69489 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56439, #6664, #12945, #19188 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336190607183500E-007, 0.0006649560044143761700 ), + .UNSPECIFIED. ) ; +#69490 = CARTESIAN_POINT ( 'NONE', ( -16.65164147752690500, 72.08770193146233400, -28.47147304844861500 ) ) ; +#69491 = VERTEX_POINT ( 'NONE', #42590 ) ; +#69492 = PLANE ( 'NONE', #17864 ) ; +#69493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69494 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344316200, 28.42298334620755500, -28.20555803802994900 ) ) ; +#69496 = VERTEX_POINT ( 'NONE', #17871 ) ; +#69495 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#69497 = CARTESIAN_POINT ( 'NONE', ( 17.06581962135470600, 21.50863606381448200, -28.49020639256001900 ) ) ; +#69498 = CONICAL_SURFACE ( 'NONE', #31324, 10.00000000000009400, 0.7853981633974447300 ) ; +#69499 = ORIENTED_EDGE ( 'NONE', *, *, #65314, .F. ) ; +#69500 = CONICAL_SURFACE ( 'NONE', #5972, 10.50000000000009600, 0.7853981633974500600 ) ; +#69502 = EDGE_CURVE ( 'NONE', #50398, #9168, #19957, .T. ) ; +#69501 = VERTEX_POINT ( 'NONE', #73628 ) ; +#69503 = EDGE_CURVE ( 'NONE', #16467, #77471, #36478, .T. ) ; +#69504 = ORIENTED_EDGE ( 'NONE', *, *, #41657, .F. ) ; +#69505 = CIRCLE ( 'NONE', #36022, 10.00000000000009200 ) ; +#69506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13760, #50951, #19999, #63523 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104962628500, 0.0007670610367938010600 ), + .UNSPECIFIED. ) ; +#69507 = FACE_OUTER_BOUND ( 'NONE', #74450, .T. ) ; +#69508 = ORIENTED_EDGE ( 'NONE', *, *, #17146, .T. ) ; +#69509 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69510 = ORIENTED_EDGE ( 'NONE', *, *, #20732, .F. ) ; +#69511 = EDGE_LOOP ( 'NONE', ( #27497, #5757, #75198, #70915 ) ) ; +#69512 = ADVANCED_FACE ( 'NONE', ( #71549 ), #5621, .T. ) ; +#69513 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 8.333333333333342800, 3.124568980892187500 ) ) ; +#69514 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69515 = EDGE_CURVE ( 'NONE', #77385, #50101, #51048, .T. ) ; +#69516 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944367800, 17.80044153222984000, -28.38339015421984300 ) ) ; +#69517 = CONICAL_SURFACE ( 'NONE', #80531, 10.00000000000009200, 0.7853981633974447300 ) ; +#69518 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873323700, 71.70803673496116900, -28.29033182162437400 ) ) ; +#69519 = ORIENTED_EDGE ( 'NONE', *, *, #52343, .T. ) ; +#69520 = EDGE_CURVE ( 'NONE', #76162, #65128, #46433, .T. ) ; +#69521 = CONICAL_SURFACE ( 'NONE', #78996, 10.00000000000009200, 0.7853981633974447300 ) ; +#69522 = EDGE_CURVE ( 'NONE', #14698, #74718, #32017, .T. ) ; +#69523 = EDGE_LOOP ( 'NONE', ( #34527, #53625, #15376, #37086 ) ) ; +#69524 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69525 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69526 = VERTEX_POINT ( 'NONE', #24653 ) ; +#69527 = ORIENTED_EDGE ( 'NONE', *, *, #11893, .F. ) ; +#69528 = ORIENTED_EDGE ( 'NONE', *, *, #21556, .T. ) ; +#69529 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#69530 = ORIENTED_EDGE ( 'NONE', *, *, #14485, .F. ) ; +#69531 = CONICAL_SURFACE ( 'NONE', #47526, 10.50000000000009800, 0.7853981633974518300 ) ; +#69532 = AXIS2_PLACEMENT_3D ( 'NONE', #1881, #45378, #8125 ) ; +#69533 = EDGE_CURVE ( 'NONE', #66701, #66575, #17570, .T. ) ; +#69534 = EDGE_CURVE ( 'NONE', #61281, #36371, #53026, .T. ) ; +#69535 = CARTESIAN_POINT ( 'NONE', ( 10.77874659791491900, 49.66476742015635900, -28.30311934730018200 ) ) ; +#69536 = EDGE_CURVE ( 'NONE', #52219, #31993, #3075, .T. ) ; +#69537 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034401200, 17.92298334620717900, -28.20555803803002000 ) ) ; +#69539 = ADVANCED_FACE ( 'NONE', ( #34566 ), #16057, .F. ) ; +#69538 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58573, #15067, #64871, #27599 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055015082135669100E-007, 0.0007675026475694987700 ), + .UNSPECIFIED. ) ; +#69540 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69542 = ORIENTED_EDGE ( 'NONE', *, *, #70600, .T. ) ; +#69543 = AXIS2_PLACEMENT_3D ( 'NONE', #9652, #34691, #78202 ) ; +#69544 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69545 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651188100, 69.60439022488283500, -28.70555803803047500 ) ) ; +#69546 = ORIENTED_EDGE ( 'NONE', *, *, #38050, .F. ) ; +#69547 = FACE_OUTER_BOUND ( 'NONE', #36350, .T. ) ; +#69548 = CARTESIAN_POINT ( 'NONE', ( -18.72776984186886700, 2.544458905896018300, -25.37001692042070300 ) ) ; +#69549 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69550 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#69551 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 79.97246552159111800, -28.38801640354855100 ) ) ; +#69552 = AXIS2_PLACEMENT_3D ( 'NONE', #31147, #74396, #6368 ) ; +#69553 = AXIS2_PLACEMENT_3D ( 'NONE', #35922, #79448, #29708 ) ; +#69554 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 61.43250300240198000, -28.20555803803047800 ) ) ; +#69555 = AXIS2_PLACEMENT_3D ( 'NONE', #80327, #43033, #5799 ) ; +#69556 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69557 = CARTESIAN_POINT ( 'NONE', ( 2.107689023311820600E-013, 67.94142842854276400, -28.20555803802997700 ) ) ; +#69558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69559 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 14.16666666666667700, -3.349151577478988200 ) ) ; +#69560 = CONICAL_SURFACE ( 'NONE', #37627, 10.50000000000009600, 0.7853981633974500600 ) ; +#69561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69562 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#69563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69564 = ORIENTED_EDGE ( 'NONE', *, *, #27773, .T. ) ; +#69565 = CONICAL_SURFACE ( 'NONE', #73441, 10.50000000000009200, 0.7853981633974482800 ) ; +#69566 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019500, 51.43250300240212200, -28.20555803803014400 ) ) ; +#69567 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 80.52242369685794200, -28.53861367218593200 ) ) ; +#69568 = AXIS2_PLACEMENT_3D ( 'NONE', #15976, #40706, #9717 ) ; +#69569 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69570 = EDGE_CURVE ( 'NONE', #4205, #3808, #69402, .T. ) ; +#69571 = ORIENTED_EDGE ( 'NONE', *, *, #27843, .T. ) ; +#69572 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655344100, 10.17701665379216200, -28.20555803803002000 ) ) ; +#69573 = VERTEX_POINT ( 'NONE', #56171 ) ; +#69574 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875126100, 55.13282980700490300, -28.53914313452759900 ) ) ; +#69575 = CONICAL_SURFACE ( 'NONE', #48427, 10.50000000000009600, 0.7853981633974500600 ) ; +#69576 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#69577 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 80.79999999999999700, -28.20555803802997700 ) ) ; +#69578 = CONICAL_SURFACE ( 'NONE', #78909, 10.00000000000009200, 0.7853981633974447300 ) ; +#69579 = ORIENTED_EDGE ( 'NONE', *, *, #13793, .T. ) ; +#69580 = CARTESIAN_POINT ( 'NONE', ( 2.133709875451472700E-013, 88.62623792124918500, -28.70555803802997700 ) ) ; +#69581 = EDGE_CURVE ( 'NONE', #56903, #23333, #32587, .T. ) ; +#69582 = FACE_OUTER_BOUND ( 'NONE', #78955, .T. ) ; +#69583 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404300, 28.42298334620739900, -28.20555803802994500 ) ) ; +#69584 = AXIS2_PLACEMENT_3D ( 'NONE', #33556, #77073, #39809 ) ; +#69585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12880, #56361, #75144, #37857 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764792098132300E-007, 0.0009376791149927956300 ), + .UNSPECIFIED. ) ; +#69586 = ORIENTED_EDGE ( 'NONE', *, *, #27622, .F. ) ; +#69587 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 40.90050506338823100, -28.70555803802997700 ) ) ; +#69588 = EDGE_LOOP ( 'NONE', ( #66270, #10576, #45196 ) ) ; +#69589 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609421500, 81.46283204837340000, -28.48697406221668500 ) ) ; +#69590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69591 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999989900, 80.79999999999968500, -28.20555803803030800 ) ) ; +#69592 = ADVANCED_FACE ( 'NONE', ( #38409 ), #47152, .T. ) ; +#69593 = CONICAL_SURFACE ( 'NONE', #25255, 10.50000000000009600, 0.7853981633974482800 ) ; +#69594 = ORIENTED_EDGE ( 'NONE', *, *, #52708, .F. ) ; +#69595 = AXIS2_PLACEMENT_3D ( 'NONE', #6645, #31422, #50130 ) ; +#69596 = CONICAL_SURFACE ( 'NONE', #19521, 10.00000000000009400, 0.7853981633974447300 ) ; +#69597 = ORIENTED_EDGE ( 'NONE', *, *, #5111, .F. ) ; +#69598 = CARTESIAN_POINT ( 'NONE', ( -2.989537268536985400, 71.25732391202390700, -28.20555803802997700 ) ) ; +#69599 = ORIENTED_EDGE ( 'NONE', *, *, #52198, .F. ) ; +#69600 = ORIENTED_EDGE ( 'NONE', *, *, #37942, .F. ) ; +#69601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69602 = ORIENTED_EDGE ( 'NONE', *, *, #18875, .F. ) ; +#69603 = ADVANCED_FACE ( 'NONE', ( #65705 ), #62726, .T. ) ; +#69604 = CONICAL_SURFACE ( 'NONE', #26600, 10.00000000000009600, 0.7853981633974482800 ) ; +#69605 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 57.83333333333333600, -6.205558038030004800 ) ) ; +#69606 = VERTEX_POINT ( 'NONE', #37937 ) ; +#69607 = AXIS2_PLACEMENT_3D ( 'NONE', #15911, #65462, #22177 ) ; +#69608 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69610 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629000, 38.92298334620784300, -28.20555803802995200 ) ) ; +#69611 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 22.83333333333335700, -9.205558038030003900 ) ) ; +#69612 = VERTEX_POINT ( 'NONE', #684 ) ; +#69613 = FACE_OUTER_BOUND ( 'NONE', #5091, .T. ) ; +#69614 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69615 = EDGE_CURVE ( 'NONE', #79769, #63311, #18004, .T. ) ; +#69616 = EDGE_LOOP ( 'NONE', ( #57869, #54380, #4064, #32540, #26302 ) ) ; +#69617 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#69618 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#69619 = ADVANCED_FACE ( 'NONE', ( #63755 ), #61804, .F. ) ; +#69620 = FACE_OUTER_BOUND ( 'NONE', #16865, .T. ) ; +#69621 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 60.16666666666666400, 9.794441961969994300 ) ) ; +#69622 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#69623 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865853500, 41.18727262089430500, -28.28853693900643100 ) ) ; +#69624 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#69626 = ADVANCED_FACE ( 'NONE', ( #1433 ), #28744, .T. ) ; +#69625 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #15179, #71206, #9165, #52693 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925643944600E-007, 0.0004431156063177120800 ), + .UNSPECIFIED. ) ; +#69627 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528132700, 20.46868088498121800, -28.51286550264510200 ) ) ; +#69628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69629 = EDGE_CURVE ( 'NONE', #17037, #70776, #45181, .T. ) ; +#69630 = FACE_OUTER_BOUND ( 'NONE', #16015, .T. ) ; +#69631 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#69632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69633 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43556, #48, #56084, #18834 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549120749300E-007, 0.0008759529789574139900 ), + .UNSPECIFIED. ) ; +#69634 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 9.932503002402294000, -28.20555803802994200 ) ) ; +#69635 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285712600, 12.17681279774500100, -28.70555803802994200 ) ) ; +#69636 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#69637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48222, #4721, #67022, #29805 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183069800, 0.005168056621191832200 ), + .UNSPECIFIED. ) ; +#69638 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#69640 = VERTEX_POINT ( 'NONE', #50711 ) ; +#69639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69641 = FACE_OUTER_BOUND ( 'NONE', #19897, .T. ) ; +#69642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#69643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69644 = AXIS2_PLACEMENT_3D ( 'NONE', #36671, #80197, #42920 ) ; +#69645 = EDGE_CURVE ( 'NONE', #75109, #75334, #54946, .T. ) ; +#69646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69647 = EDGE_CURVE ( 'NONE', #78191, #52661, #40480, .T. ) ; +#69648 = EDGE_LOOP ( 'NONE', ( #45747, #2129, #44461 ) ) ; +#69649 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69650 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#69651 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40622, #46852, #22142, #65677 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.955157123653728000E-007, 0.0002959323803891256900 ), + .UNSPECIFIED. ) ; +#69652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#69653 = EDGE_CURVE ( 'NONE', #11140, #47696, #26047, .T. ) ; +#69654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69656 = CONICAL_SURFACE ( 'NONE', #40586, 10.50000000000009600, 0.7853981633974500600 ) ; +#69657 = AXIS2_PLACEMENT_3D ( 'NONE', #10685, #23196, #66714 ) ; +#69658 = FACE_OUTER_BOUND ( 'NONE', #29965, .T. ) ; +#69659 = ORIENTED_EDGE ( 'NONE', *, *, #68814, .F. ) ; +#69660 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 63.66666666666667900, -5.205558038030003100 ) ) ; +#69661 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467482000, 9.268939712926288300, -28.57333386110744300 ) ) ; +#69662 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#69663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69664 = CONICAL_SURFACE ( 'NONE', #36949, 10.00000000000009200, 0.7853981633974415100 ) ; +#69665 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462828500, 80.34267608797598800, -28.20555803802997700 ) ) ; +#69666 = PLANE ( 'NONE', #6346 ) ; +#69667 = ORIENTED_EDGE ( 'NONE', *, *, #62412, .T. ) ; +#69668 = EDGE_LOOP ( 'NONE', ( #32941, #19373, #32533, #57541, #34600 ) ) ; +#69669 = CARTESIAN_POINT ( 'NONE', ( 4.283176507098811900, 10.03732497909444100, -28.41043597897465400 ) ) ; +#69670 = AXIS2_PLACEMENT_3D ( 'NONE', #813, #75616, #69363 ) ; +#69671 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057900, 61.46283204837340700, -28.48697406221668200 ) ) ; +#69672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69673 = AXIS2_PLACEMENT_3D ( 'NONE', #72218, #65952, #9907 ) ; +#69674 = PLANE ( 'NONE', #55501 ) ; +#69675 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69676 = FACE_OUTER_BOUND ( 'NONE', #21016, .T. ) ; +#69677 = EDGE_CURVE ( 'NONE', #51916, #9324, #80283, .T. ) ; +#69679 = FACE_OUTER_BOUND ( 'NONE', #17696, .T. ) ; +#69678 = AXIS2_PLACEMENT_3D ( 'NONE', #47566, #35393, #53855 ) ; +#69680 = ORIENTED_EDGE ( 'NONE', *, *, #59559, .F. ) ; +#69681 = ORIENTED_EDGE ( 'NONE', *, *, #5536, .T. ) ; +#69682 = VERTEX_POINT ( 'NONE', #13776 ) ; +#69683 = ORIENTED_EDGE ( 'NONE', *, *, #11665, .F. ) ; +#69684 = VERTEX_POINT ( 'NONE', #32504 ) ; +#69685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49761, #68295, #24782, #12547 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953613800E-018, 0.001707792749031558200 ), + .UNSPECIFIED. ) ; +#69686 = CARTESIAN_POINT ( 'NONE', ( 16.68767301991442100, 67.07041105632814000, -28.56367862433819800 ) ) ; +#69687 = FACE_OUTER_BOUND ( 'NONE', #53291, .T. ) ; +#69688 = EDGE_CURVE ( 'NONE', #17105, #8912, #11583, .T. ) ; +#69689 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 28.83333333333333200, 0.9380355014189731800 ) ) ; +#69690 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 41.25489551879204700, -28.37193179497697300 ) ) ; +#69691 = CIRCLE ( 'NONE', #31244, 10.00000000000009400 ) ; +#69692 = AXIS2_PLACEMENT_3D ( 'NONE', #62544, #75313, #19557 ) ; +#69693 = ORIENTED_EDGE ( 'NONE', *, *, #43549, .T. ) ; +#69694 = AXIS2_PLACEMENT_3D ( 'NONE', #71924, #34661, #78171 ) ; +#69695 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36475, #73776, #42730, #5493 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966242100, 0.0007670610367940492300 ), + .UNSPECIFIED. ) ; +#69696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69697 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69698 = ADVANCED_FACE ( 'NONE', ( #30666 ), #43263, .F. ) ; +#69699 = ORIENTED_EDGE ( 'NONE', *, *, #21883, .F. ) ; +#69700 = CONICAL_SURFACE ( 'NONE', #68015, 10.00000000000009400, 0.7853981633974447300 ) ; +#69701 = ORIENTED_EDGE ( 'NONE', *, *, #79975, .F. ) ; +#69702 = CONICAL_SURFACE ( 'NONE', #76708, 10.50000000000009600, 0.7853981633974500600 ) ; +#69703 = AXIS2_PLACEMENT_3D ( 'NONE', #37401, #37671, #25190 ) ; +#69704 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000074600, 73.20037755566795600, -28.53664883431634900 ) ) ; +#69705 = ADVANCED_FACE ( 'NONE', ( #76371 ), #10197, .F. ) ; +#69706 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537167900, 71.25732391202396300, -28.20555803802997700 ) ) ; +#69707 = ORIENTED_EDGE ( 'NONE', *, *, #54190, .T. ) ; +#69708 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 96.59999999999999400, 16.29444196196998700 ) ) ; +#69709 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#69710 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 0.1666666666666696000, 1.741883078712356500 ) ) ; +#69711 = AXIS2_PLACEMENT_3D ( 'NONE', #26132, #26412, #51084 ) ; +#69712 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69713 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 60.34267608797603800, -28.20555803802997700 ) ) ; +#69714 = CIRCLE ( 'NONE', #21946, 10.50000000000009600 ) ; +#69715 = VERTEX_POINT ( 'NONE', #51499 ) ; +#69716 = ADVANCED_FACE ( 'NONE', ( #12162 ), #57882, .F. ) ; +#69717 = CYLINDRICAL_SURFACE ( 'NONE', #32161, 10.00000000000000200 ) ; +#69718 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69719 = CARTESIAN_POINT ( 'NONE', ( -16.44673298322516400, 90.11613117245443000, -28.57420149390117100 ) ) ; +#69720 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 81.25732391202397800, -28.20555803802997700 ) ) ; +#69721 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#69722 = ORIENTED_EDGE ( 'NONE', *, *, #8153, .T. ) ; +#69723 = FACE_OUTER_BOUND ( 'NONE', #41592, .T. ) ; +#69724 = AXIS2_PLACEMENT_3D ( 'NONE', #38337, #44557, #56869 ) ; +#69725 = CARTESIAN_POINT ( 'NONE', ( 10.62858178328649200, 60.16749699759768800, -28.25056166218025000 ) ) ; +#69726 = VERTEX_POINT ( 'NONE', #26808 ) ; +#69727 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69728 = ADVANCED_FACE ( 'NONE', ( #49102 ), #24795, .F. ) ; +#69729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69730 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939079500, 35.68533208989821000, -28.53910738522651500 ) ) ; +#69731 = FACE_OUTER_BOUND ( 'NONE', #17292, .T. ) ; +#69732 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69733 = CONICAL_SURFACE ( 'NONE', #46432, 10.50000000000009600, 0.7853981633974500600 ) ; +#69734 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 34.66666666666667900, -5.535685056952199400 ) ) ; +#69735 = ORIENTED_EDGE ( 'NONE', *, *, #55242, .T. ) ; +#69736 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507542800, 31.52620220503759500, -28.70555803802995200 ) ) ; +#69737 = CARTESIAN_POINT ( 'NONE', ( 4.801413064970932800, 94.72249899919830800, -28.20555803803030800 ) ) ; +#69738 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#69739 = ORIENTED_EDGE ( 'NONE', *, *, #880, .T. ) ; +#69740 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609421500, 81.46283204837340000, -28.48697406221668500 ) ) ; +#69741 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#69742 = ORIENTED_EDGE ( 'NONE', *, *, #43469, .F. ) ; +#69743 = ADVANCED_FACE ( 'NONE', ( #14104 ), #72496, .T. ) ; +#69744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69745 = CARTESIAN_POINT ( 'NONE', ( -4.002024496668898500, 18.28907889423218700, -28.25433304472391400 ) ) ; +#69746 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 63.89610994602603000, -28.37519436813183700 ) ) ; +#69747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69748 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 70.79999999999998300, -28.45034744217088700 ) ) ; +#69749 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69751 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3440, #76871, #15970, #59506 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487894200 ), + .UNSPECIFIED. ) ; +#69752 = CONICAL_SURFACE ( 'NONE', #52761, 10.50000000000009600, 0.7853981633974500600 ) ; +#69753 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428567600, 18.07141756547860100, -28.70555803803025800 ) ) ; +#69754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69755 = ORIENTED_EDGE ( 'NONE', *, *, #3250, .F. ) ; +#69756 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69757 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#69758 = VERTEX_POINT ( 'NONE', #14555 ) ; +#69759 = VERTEX_POINT ( 'NONE', #58061 ) ; +#69760 = VERTEX_POINT ( 'NONE', #20807 ) ; +#69761 = EDGE_CURVE ( 'NONE', #31022, #76951, #77895, .T. ) ; +#69762 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69763 = VERTEX_POINT ( 'NONE', #39277 ) ; +#69764 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285811200, 83.67681279774460300, -28.70555803803030800 ) ) ; +#69765 = CONICAL_SURFACE ( 'NONE', #80782, 10.50000000000009600, 0.7853981633974500600 ) ; +#69766 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#69767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69768 = ORIENTED_EDGE ( 'NONE', *, *, #11883, .F. ) ; +#69769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27023, #64298, #76756, #39494 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210952900, 0.001517199873936105000 ), + .UNSPECIFIED. ) ; +#69770 = EDGE_CURVE ( 'NONE', #11868, #77007, #74444, .T. ) ; +#69771 = CARTESIAN_POINT ( 'NONE', ( 16.33257079600106500, 23.97013982134319900, -28.62099087449130900 ) ) ; +#69772 = EDGE_CURVE ( 'NONE', #53544, #60031, #63450, .T. ) ; +#69773 = ORIENTED_EDGE ( 'NONE', *, *, #9451, .F. ) ; +#69774 = CONICAL_SURFACE ( 'NONE', #68499, 10.00000000000009200, 0.7853981633974447300 ) ; +#69775 = AXIS2_PLACEMENT_3D ( 'NONE', #54031, #16793, #60327 ) ; +#69776 = ORIENTED_EDGE ( 'NONE', *, *, #48290, .F. ) ; +#69777 = CIRCLE ( 'NONE', #42256, 10.00000000000009400 ) ; +#69778 = FACE_OUTER_BOUND ( 'NONE', #72213, .T. ) ; +#69779 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 6.166666666666678500, -6.205558038030004800 ) ) ; +#69780 = AXIS2_PLACEMENT_3D ( 'NONE', #50930, #20233, #63770 ) ; +#69781 = EDGE_CURVE ( 'NONE', #70202, #50238, #48935, .T. ) ; +#69782 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44162, #37941, #43921, #6948 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785914549600E-007, 0.0007677775503754671800 ), + .UNSPECIFIED. ) ; +#69783 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#69785 = ORIENTED_EDGE ( 'NONE', *, *, #77971, .F. ) ; +#69784 = EDGE_CURVE ( 'NONE', #8206, #75947, #59860, .T. ) ; +#69786 = EDGE_CURVE ( 'NONE', #15543, #52661, #34523, .T. ) ; +#69787 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#69788 = AXIS2_PLACEMENT_3D ( 'NONE', #38771, #1534, #45012 ) ; +#69789 = AXIS2_PLACEMENT_3D ( 'NONE', #78267, #40998, #3710 ) ; +#69790 = CONICAL_SURFACE ( 'NONE', #14085, 10.00000000000009600, 0.7853981633974482800 ) ; +#69791 = ORIENTED_EDGE ( 'NONE', *, *, #50086, .T. ) ; +#69792 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69794 = ORIENTED_EDGE ( 'NONE', *, *, #80274, .F. ) ; +#69795 = AXIS2_PLACEMENT_3D ( 'NONE', #79888, #42589, #5349 ) ; +#69796 = ORIENTED_EDGE ( 'NONE', *, *, #55211, .T. ) ; +#69797 = EDGE_CURVE ( 'NONE', #42026, #47050, #41335, .T. ) ; +#69798 = EDGE_LOOP ( 'NONE', ( #37462, #28831, #66675, #40559, #76796 ) ) ; +#69799 = FACE_OUTER_BOUND ( 'NONE', #45187, .T. ) ; +#69800 = AXIS2_PLACEMENT_3D ( 'NONE', #22797, #29102, #72583 ) ; +#69801 = AXIS2_PLACEMENT_3D ( 'NONE', #44640, #7413, #50916 ) ; +#69802 = VERTEX_POINT ( 'NONE', #64614 ) ; +#69803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69804 = CARTESIAN_POINT ( 'NONE', ( -16.23198932094852200, 50.61332291990217400, -28.63161540779368900 ) ) ; +#69805 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#69806 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#69807 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823703100, 42.40456253568395100, -28.61277292027075700 ) ) ; +#69808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69810 = CIRCLE ( 'NONE', #54177, 10.00000000000009600 ) ; +#69811 = VERTEX_POINT ( 'NONE', #21631 ) ; +#69812 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999955200, 51.43250300240198000, -28.20555803803047800 ) ) ; +#69813 = ADVANCED_FACE ( 'NONE', ( #8205 ), #70509, .T. ) ; +#69814 = AXIS2_PLACEMENT_3D ( 'NONE', #18791, #25051, #68568 ) ; +#69815 = CARTESIAN_POINT ( 'NONE', ( -17.22638019272591200, 5.547237995628445400, -27.65950191244093800 ) ) ; +#69816 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69817 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079816900, 81.43383669612077800, -28.27375072930982500 ) ) ; +#69818 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.16749699759769500, -28.20555803802997700 ) ) ; +#69819 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#69820 = CARTESIAN_POINT ( 'NONE', ( -9.487410011450967000, 70.12140959736000000, -28.55996453402213600 ) ) ; +#69821 = ADVANCED_FACE ( 'NONE', ( #78350 ), #37405, .F. ) ; +#69822 = ORIENTED_EDGE ( 'NONE', *, *, #59033, .T. ) ; +#69823 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390048300, 70.13716795162662300, -28.48697406221649700 ) ) ; +#69824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36944, #74257, #49431, #12218 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225185389200E-007, 0.001119324643800055700 ), + .UNSPECIFIED. ) ; +#69826 = ADVANCED_FACE ( 'NONE', ( #22845 ), #4337, .T. ) ; +#69827 = CIRCLE ( 'NONE', #32274, 9.500000000000099500 ) ; +#69828 = FACE_OUTER_BOUND ( 'NONE', #2391, .T. ) ; +#69829 = AXIS2_PLACEMENT_3D ( 'NONE', #13654, #57149, #19896 ) ; +#69830 = VERTEX_POINT ( 'NONE', #15632 ) ; +#69831 = ORIENTED_EDGE ( 'NONE', *, *, #74427, .T. ) ; +#69832 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#69833 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 12.00000000000001100, -1.205558038030005300 ) ) ; +#69834 = ORIENTED_EDGE ( 'NONE', *, *, #53097, .F. ) ; +#69835 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823702100, 38.19543746431600100, -28.61277292027075700 ) ) ; +#69836 = ORIENTED_EDGE ( 'NONE', *, *, #5597, .T. ) ; +#69837 = EDGE_LOOP ( 'NONE', ( #27568, #30329, #19410, #32039 ) ) ; +#69838 = ORIENTED_EDGE ( 'NONE', *, *, #42812, .F. ) ; +#69839 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034431400, 49.42298334620755200, -28.20555803802997400 ) ) ; +#69840 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69841 = AXIS2_PLACEMENT_3D ( 'NONE', #60924, #42380, #17673 ) ; +#69843 = ORIENTED_EDGE ( 'NONE', *, *, #29891, .F. ) ; +#69842 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195753400, 48.50972971738993800, -28.70555803802997000 ) ) ; +#69844 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819243100, 69.94924284854681700, -28.20555803803005900 ) ) ; +#69845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69846 = EDGE_CURVE ( 'NONE', #38367, #60436, #20053, .T. ) ; +#69847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73854, #55057, #61360, #36558 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697193994700E-007, 0.0008724363063898887000 ), + .UNSPECIFIED. ) ; +#69848 = CIRCLE ( 'NONE', #50719, 10.50000000000009600 ) ; +#69849 = PLANE ( 'NONE', #48485 ) ; +#69850 = AXIS2_PLACEMENT_3D ( 'NONE', #5502, #48974, #11767 ) ; +#69851 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69852 = ORIENTED_EDGE ( 'NONE', *, *, #32344, .T. ) ; +#69853 = VERTEX_POINT ( 'NONE', #28175 ) ; +#69854 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, 91.25227248018352100, -28.70555803802999500 ) ) ; +#69855 = FACE_OUTER_BOUND ( 'NONE', #36708, .T. ) ; +#69856 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 41.44069092601379400, -28.35186440610858600 ) ) ; +#69857 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.93250300240229200, -28.20555803802996700 ) ) ; +#69858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54201, #41956, #10981, #54476 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721860517000E-007, 0.001076779618376923800 ), + .UNSPECIFIED. ) ; +#69859 = CARTESIAN_POINT ( 'NONE', ( -9.760105492671991500, 69.66414768974078700, -28.38420446581270400 ) ) ; +#69860 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846550600, 18.99920551340369100, -28.70555803803025800 ) ) ; +#69861 = EDGE_LOOP ( 'NONE', ( #49043, #39008, #51074 ) ) ; +#69862 = EDGE_CURVE ( 'NONE', #17421, #40890, #26755, .T. ) ; +#69863 = CARTESIAN_POINT ( 'NONE', ( -17.24454976001813800, 8.877725119990932600, -28.45040264298921800 ) ) ; +#69864 = CONICAL_SURFACE ( 'NONE', #27086, 10.50000000000009200, 0.7853981633974482800 ) ; +#69865 = ORIENTED_EDGE ( 'NONE', *, *, #40798, .T. ) ; +#69867 = EDGE_CURVE ( 'NONE', #44641, #42640, #20903, .T. ) ; +#69866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20048, #57294, #38755, #1519 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066648287104276100E-007, 0.0004318378175232945800 ), + .UNSPECIFIED. ) ; +#69868 = VERTEX_POINT ( 'NONE', #2789 ) ; +#69869 = CARTESIAN_POINT ( 'NONE', ( -2.279102202939597100, 61.50050326225950700, -28.63287226700111500 ) ) ; +#69870 = CONICAL_SURFACE ( 'NONE', #29514, 10.50000000000009400, 0.7853981633974500600 ) ; +#69871 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 55.66666666666667900, 3.124568980892192800 ) ) ; +#69872 = CARTESIAN_POINT ( 'NONE', ( -10.36049707220279500, 41.43250300240230600, -28.25438406275899800 ) ) ; +#69873 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343277900, 49.85339758437807900, -28.20555803802996700 ) ) ; +#69874 = EDGE_CURVE ( 'NONE', #72417, #33380, #5581, .T. ) ; +#69875 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23481, #17221, #60755, #66997 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646184000, 0.0009605145132141894500 ), + .UNSPECIFIED. ) ; +#69876 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69877 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 20.66666666666668600, 5.722645192245505700 ) ) ; +#69878 = EDGE_CURVE ( 'NONE', #35911, #35532, #71921, .T. ) ; +#69879 = AXIS2_PLACEMENT_3D ( 'NONE', #73741, #67467, #29983 ) ; +#69880 = CARTESIAN_POINT ( 'NONE', ( -17.91566597477733700, 71.21410430764721900, -28.27354076558355800 ) ) ; +#69881 = FACE_OUTER_BOUND ( 'NONE', #58201, .T. ) ; +#69882 = ORIENTED_EDGE ( 'NONE', *, *, #78505, .F. ) ; +#69883 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 58.00000000000002100, -12.20555803803000200 ) ) ; +#69884 = EDGE_LOOP ( 'NONE', ( #71231, #1651, #51935, #4900, #66044 ) ) ; +#69885 = VERTEX_POINT ( 'NONE', #21603 ) ; +#69886 = AXIS2_PLACEMENT_3D ( 'NONE', #75378, #38084, #833 ) ; +#69887 = EDGE_CURVE ( 'NONE', #49628, #23867, #55914, .T. ) ; +#69888 = CARTESIAN_POINT ( 'NONE', ( 5.685965509778316800, 35.04999999999997600, -28.37321477197629300 ) ) ; +#69889 = EDGE_CURVE ( 'NONE', #53919, #33801, #57443, .T. ) ; +#69890 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823701300, 31.90456253568396500, -28.61277292027075700 ) ) ; +#69891 = EDGE_CURVE ( 'NONE', #19682, #3242, #42956, .T. ) ; +#69892 = CARTESIAN_POINT ( 'NONE', ( 9.438174915909124600, 9.983857102125123000, -28.57719681746175100 ) ) ; +#69893 = CARTESIAN_POINT ( 'NONE', ( 10.87858748550037500, 89.83662311806139700, -28.37223523914924800 ) ) ; +#69894 = FACE_OUTER_BOUND ( 'NONE', #17893, .T. ) ; +#69895 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#69896 = CIRCLE ( 'NONE', #28757, 10.00000000000009200 ) ; +#69897 = ORIENTED_EDGE ( 'NONE', *, *, #73141, .T. ) ; +#69898 = EDGE_LOOP ( 'NONE', ( #76159, #21383, #43103 ) ) ; +#69899 = AXIS2_PLACEMENT_3D ( 'NONE', #45709, #58528, #45980 ) ; +#69900 = ORIENTED_EDGE ( 'NONE', *, *, #32748, .T. ) ; +#69901 = CARTESIAN_POINT ( 'NONE', ( 16.32624390300895800, 53.19621076493010700, -28.61864990621750900 ) ) ; +#69902 = VERTEX_POINT ( 'NONE', #59388 ) ; +#69903 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105224900, 61.31766786975327200, -28.25051428653891300 ) ) ; +#69904 = ORIENTED_EDGE ( 'NONE', *, *, #73580, .T. ) ; +#69905 = CARTESIAN_POINT ( 'NONE', ( -9.497924978448516200, 50.60145251508603800, -28.70555803802997700 ) ) ; +#69906 = ORIENTED_EDGE ( 'NONE', *, *, #78549, .T. ) ; +#69907 = ORIENTED_EDGE ( 'NONE', *, *, #8013, .F. ) ; +#69908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69909 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#69910 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 101.5999999999999900, -28.70555803803001300 ) ) ; +#69911 = EDGE_CURVE ( 'NONE', #76876, #75931, #28567, .T. ) ; +#69912 = ADVANCED_FACE ( 'NONE', ( #53965 ), #2366, .T. ) ; +#69913 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#69914 = AXIS2_PLACEMENT_3D ( 'NONE', #46887, #3377, #52885 ) ; +#69915 = AXIS2_PLACEMENT_3D ( 'NONE', #59233, #21974, #65524 ) ; +#69916 = ORIENTED_EDGE ( 'NONE', *, *, #57041, .F. ) ; +#69917 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 70.16054007504466500, -28.34042301926881200 ) ) ; +#69918 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45766, #14794, #39815, #2525 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402418400 ), + .UNSPECIFIED. ) ; +#69919 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69920 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#69921 = CONICAL_SURFACE ( 'NONE', #43311, 10.00000000000009400, 0.7853981633974447300 ) ; +#69922 = ORIENTED_EDGE ( 'NONE', *, *, #58658, .F. ) ; +#69923 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 61.49999999999999300, 4.650848422521012700 ) ) ; +#69924 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69925 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#69926 = ORIENTED_EDGE ( 'NONE', *, *, #43330, .T. ) ; +#69927 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69928 = CIRCLE ( 'NONE', #54717, 10.00000000000009600 ) ; +#69929 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462477000, 80.20590598242372900, -28.39369363572359700 ) ) ; +#69930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69931 = AXIS2_PLACEMENT_3D ( 'NONE', #21345, #64874, #27602 ) ; +#69932 = CARTESIAN_POINT ( 'NONE', ( -4.533744140368824600, 91.59999999999999400, -28.70555803802999500 ) ) ; +#69933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69935 = EDGE_LOOP ( 'NONE', ( #20931, #37367, #31600, #31279, #13209 ) ) ; +#69936 = ADVANCED_FACE ( 'NONE', ( #39360 ), #50030, .F. ) ; +#69937 = AXIS2_PLACEMENT_3D ( 'NONE', #26080, #69561, #32316 ) ; +#69938 = CONICAL_SURFACE ( 'NONE', #27562, 10.00000000000009400, 0.7853981633974447300 ) ; +#69939 = ORIENTED_EDGE ( 'NONE', *, *, #47679, .F. ) ; +#69940 = EDGE_CURVE ( 'NONE', #4061, #40419, #14063, .T. ) ; +#69941 = AXIS2_PLACEMENT_3D ( 'NONE', #65194, #27936, #71409 ) ; +#69942 = ORIENTED_EDGE ( 'NONE', *, *, #80723, .T. ) ; +#69943 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489654800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#69944 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 26.66666666666667900, -5.205558038030003100 ) ) ; +#69945 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001800, 30.56914835874665200, -28.45573375118225500 ) ) ; +#69947 = AXIS2_PLACEMENT_3D ( 'NONE', #17211, #60739, #23462 ) ; +#69946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29206, #66432, #78956, #41649 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716318200, 0.004080294652941822100 ), + .UNSPECIFIED. ) ; +#69948 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#69949 = AXIS2_PLACEMENT_3D ( 'NONE', #10853, #60633, #66882 ) ; +#69950 = CIRCLE ( 'NONE', #67661, 10.50000000000009600 ) ; +#69951 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69952 = FACE_OUTER_BOUND ( 'NONE', #48638, .T. ) ; +#69953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58379, #14853, #27387, #70875 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104709600, 0.0005411754951802399900 ), + .UNSPECIFIED. ) ; +#69954 = ORIENTED_EDGE ( 'NONE', *, *, #68641, .F. ) ; +#69955 = CARTESIAN_POINT ( 'NONE', ( 16.68942240455971800, 74.52391587796454100, -28.56336785413098400 ) ) ; +#69956 = ORIENTED_EDGE ( 'NONE', *, *, #40222, .T. ) ; +#69957 = ORIENTED_EDGE ( 'NONE', *, *, #38158, .F. ) ; +#69958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#69959 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651191300, 71.99560977511662000, -28.70555803802997700 ) ) ; +#69960 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, -1.999999999999987300, -1.205558038030002800 ) ) ; +#69961 = CONICAL_SURFACE ( 'NONE', #11289, 10.00000000000009400, 0.7853981633974447300 ) ; +#69962 = ORIENTED_EDGE ( 'NONE', *, *, #4146, .T. ) ; +#69963 = CIRCLE ( 'NONE', #70871, 9.500000000000097700 ) ; +#69964 = ORIENTED_EDGE ( 'NONE', *, *, #41642, .T. ) ; +#69965 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 70.90050506338820900, -28.70555803802997700 ) ) ; +#69966 = ORIENTED_EDGE ( 'NONE', *, *, #44473, .T. ) ; +#69967 = EDGE_CURVE ( 'NONE', #56298, #5753, #80371, .T. ) ; +#69968 = EDGE_LOOP ( 'NONE', ( #28502, #8386, #1166 ) ) ; +#69969 = CONICAL_SURFACE ( 'NONE', #26215, 10.50000000000009900, 0.7853981633974518300 ) ; +#69970 = EDGE_CURVE ( 'NONE', #22950, #13019, #65937, .T. ) ; +#69971 = EDGE_LOOP ( 'NONE', ( #39965, #5718, #63887, #13814 ) ) ; +#69972 = EDGE_LOOP ( 'NONE', ( #6559, #13230, #47736, #71295, #67825, #77041 ) ) ; +#69973 = EDGE_LOOP ( 'NONE', ( #57906, #57417, #55389, #30097 ) ) ; +#69974 = ORIENTED_EDGE ( 'NONE', *, *, #80132, .F. ) ; +#69975 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 21.97376207875059600, -28.70555803802995200 ) ) ; +#69976 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609694100, 60.13716795162660800, -28.48697406221658600 ) ) ; +#69977 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69978 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#69979 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000400, 60.69949493661175700, -28.70555803802997700 ) ) ; +#69980 = ORIENTED_EDGE ( 'NONE', *, *, #21522, .F. ) ; +#69981 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69982 = EDGE_CURVE ( 'NONE', #6243, #39199, #66636, .T. ) ; +#69983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69984 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73603, #79865, #55086, #17846 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799619383900E-007, 0.0005050252131287549700 ), + .UNSPECIFIED. ) ; +#69985 = ADVANCED_FACE ( 'NONE', ( #18929 ), #419, .T. ) ; +#69986 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528174000, 18.13131911501876600, -28.51286550264506300 ) ) ; +#69987 = ORIENTED_EDGE ( 'NONE', *, *, #30750, .T. ) ; +#69988 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662744191900, 67.93535825203927900, -28.53896444442208800 ) ) ; +#69989 = CIRCLE ( 'NONE', #8856, 10.50000000000009600 ) ; +#69990 = EDGE_CURVE ( 'NONE', #9694, #2651, #16990, .T. ) ; +#69991 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 32.50000000000001400, 2.454695999814385600 ) ) ; +#69993 = EDGE_CURVE ( 'NONE', #38060, #1293, #33521, .T. ) ; +#69992 = VERTEX_POINT ( 'NONE', #10153 ) ; +#69994 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#69995 = ORIENTED_EDGE ( 'NONE', *, *, #19737, .F. ) ; +#69996 = ORIENTED_EDGE ( 'NONE', *, *, #51599, .T. ) ; +#69997 = ORIENTED_EDGE ( 'NONE', *, *, #37748, .T. ) ; +#69998 = ORIENTED_EDGE ( 'NONE', *, *, #69160, .F. ) ; +#69999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70000 = CARTESIAN_POINT ( 'NONE', ( 1.466819876342329000, 75.79999999999998300, -28.37307693585060900 ) ) ; +#70001 = CIRCLE ( 'NONE', #34364, 10.50000000000009600 ) ; +#70002 = CARTESIAN_POINT ( 'NONE', ( 9.655202348768948900, 18.78860447109592300, -28.53900456328633300 ) ) ; +#70003 = ADVANCED_FACE ( 'NONE', ( #51976 ), #15028, .T. ) ; +#70004 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#70005 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#70006 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 26.44142842854307300, -28.20555803802994200 ) ) ; +#70007 = AXIS2_PLACEMENT_3D ( 'NONE', #61557, #80035, #36492 ) ; +#70008 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70009 = EDGE_CURVE ( 'NONE', #63908, #14966, #31595, .T. ) ; +#70010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70011 = EDGE_CURVE ( 'NONE', #42511, #68194, #6288, .T. ) ; +#70012 = EDGE_CURVE ( 'NONE', #32367, #23494, #35502, .T. ) ; +#70013 = ORIENTED_EDGE ( 'NONE', *, *, #16, .F. ) ; +#70014 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534573800, 19.60079448659600100, -28.70555803802994200 ) ) ; +#70015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4517, #41765, #10787, #54281 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.813077866773594800E-018, 0.001707792749031570100 ), + .UNSPECIFIED. ) ; +#70016 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950487100, 41.90771342879313700, -28.53891855579977500 ) ) ; +#70017 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567176700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#70018 = AXIS2_PLACEMENT_3D ( 'NONE', #65682, #28442, #71929 ) ; +#70019 = CARTESIAN_POINT ( 'NONE', ( -10.27742216455561900, 59.72166103827332500, -28.53892303408224200 ) ) ; +#70020 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567155400, 41.24660241562189400, -28.20555803802996700 ) ) ; +#70021 = CONICAL_SURFACE ( 'NONE', #32190, 10.00000000000009600, 0.7853981633974482800 ) ; +#70022 = VERTEX_POINT ( 'NONE', #41941 ) ; +#70023 = ADVANCED_FACE ( 'NONE', ( #64706 ), #13104, .T. ) ; +#70024 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70025 = ORIENTED_EDGE ( 'NONE', *, *, #16450, .F. ) ; +#70026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70027 = CARTESIAN_POINT ( 'NONE', ( 16.42208926844654500, 18.11339344823253900, -28.58282679407413000 ) ) ; +#70028 = AXIS2_PLACEMENT_3D ( 'NONE', #74292, #6006, #18515 ) ; +#70029 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70030 = AXIS2_PLACEMENT_3D ( 'NONE', #8812, #52325, #15100 ) ; +#70031 = CARTESIAN_POINT ( 'NONE', ( 11.18892001661481900, 41.60677350908856900, -28.30799595738883300 ) ) ; +#70032 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#70033 = AXIS2_PLACEMENT_3D ( 'NONE', #26646, #39379, #8356 ) ; +#70034 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70035 = PLANE ( 'NONE', #38940 ) ; +#70036 = ADVANCED_FACE ( 'NONE', ( #79279 ), #60790, .F. ) ; +#70037 = CIRCLE ( 'NONE', #4031, 10.00000000000009200 ) ; +#70038 = FACE_OUTER_BOUND ( 'NONE', #64550, .T. ) ; +#70039 = ORIENTED_EDGE ( 'NONE', *, *, #8299, .T. ) ; +#70040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10010, #3731, #16272, #59795 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695386940833800E-007, 0.0007987676590763795500 ), + .UNSPECIFIED. ) ; +#70041 = CARTESIAN_POINT ( 'NONE', ( -2.963744891818757700, 89.94924284854707300, -28.20555803803005900 ) ) ; +#70042 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 4.000000000000006200, 3.794441961969998300 ) ) ; +#70043 = AXIS2_PLACEMENT_3D ( 'NONE', #6039, #74323, #12306 ) ; +#70044 = ORIENTED_EDGE ( 'NONE', *, *, #64220, .T. ) ; +#70045 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70046 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70047 = CIRCLE ( 'NONE', #3393, 10.50000000000009900 ) ; +#70048 = EDGE_LOOP ( 'NONE', ( #6543, #4929, #17807, #9556 ) ) ; +#70049 = FACE_OUTER_BOUND ( 'NONE', #72056, .T. ) ; +#70050 = ORIENTED_EDGE ( 'NONE', *, *, #50564, .T. ) ; +#70051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70052 = EDGE_CURVE ( 'NONE', #18573, #19028, #48095, .T. ) ; +#70053 = CONICAL_SURFACE ( 'NONE', #43327, 10.00000000000009400, 0.7853981633974447300 ) ; +#70054 = VERTEX_POINT ( 'NONE', #48446 ) ; +#70055 = AXIS2_PLACEMENT_3D ( 'NONE', #5970, #49438, #12225 ) ; +#70056 = ORIENTED_EDGE ( 'NONE', *, *, #36618, .F. ) ; +#70057 = ORIENTED_EDGE ( 'NONE', *, *, #20320, .F. ) ; +#70058 = ORIENTED_EDGE ( 'NONE', *, *, #67400, .F. ) ; +#70059 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#70060 = ORIENTED_EDGE ( 'NONE', *, *, #18904, .F. ) ; +#70061 = VERTEX_POINT ( 'NONE', #23746 ) ; +#70062 = CARTESIAN_POINT ( 'NONE', ( 10.49952059719841600, 60.90033558196090300, -28.70555803803014400 ) ) ; +#70063 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905200, 84.83849307182669000, -28.68631150211663400 ) ) ; +#70064 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527471300, 35.36071428647298400, -28.36868303842828400 ) ) ; +#70065 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#70066 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 20.25489551879203300, -28.37193179497695200 ) ) ; +#70067 = CONICAL_SURFACE ( 'NONE', #35940, 10.00000000000009400, 0.7853981633974447300 ) ; +#70068 = AXIS2_PLACEMENT_3D ( 'NONE', #43607, #6372, #49854 ) ; +#70069 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 85.46616414991795800, -28.37247596307124600 ) ) ; +#70070 = VERTEX_POINT ( 'NONE', #79763 ) ; +#70071 = EDGE_LOOP ( 'NONE', ( #38903, #78792, #58826, #64973 ) ) ; +#70072 = VERTEX_POINT ( 'NONE', #42467 ) ; +#70073 = VERTEX_POINT ( 'NONE', #36239 ) ; +#70074 = ORIENTED_EDGE ( 'NONE', *, *, #42944, .F. ) ; +#70075 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70076 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462965300, 51.25732391202377200, -28.20555803803014400 ) ) ; +#70077 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489667300, 9.940690926013793700, -28.35186440610855000 ) ) ; +#70078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70079 = CIRCLE ( 'NONE', #8682, 9.500000000000097700 ) ; +#70080 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510361600, 28.65930907398620100, -28.35186440610856500 ) ) ; +#70081 = EDGE_LOOP ( 'NONE', ( #65882, #54516, #34835, #46149 ) ) ; +#70082 = AXIS2_PLACEMENT_3D ( 'NONE', #6010, #49477, #12281 ) ; +#70083 = ORIENTED_EDGE ( 'NONE', *, *, #61484, .F. ) ; +#70084 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61948, #18416, #68177, #30934 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083080053800E-007, 0.0003101809493109162400 ), + .UNSPECIFIED. ) ; +#70085 = ADVANCED_FACE ( 'NONE', ( #68579 ), #11150, .T. ) ; +#70086 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 20.43250300240229200, -28.20555803802995200 ) ) ; +#70087 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#70088 = EDGE_CURVE ( 'NONE', #75998, #63929, #51404, .T. ) ; +#70089 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 9.833333333333357000, 0.9380355014189731800 ) ) ; +#70090 = CARTESIAN_POINT ( 'NONE', ( 15.04069429212271000, 9.918611415754581300, -28.70555803803001300 ) ) ; +#70091 = FACE_OUTER_BOUND ( 'NONE', #70109, .T. ) ; +#70092 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 81.25732391202370800, -28.20555803803030800 ) ) ; +#70093 = ORIENTED_EDGE ( 'NONE', *, *, #36809, .F. ) ; +#70094 = ORIENTED_EDGE ( 'NONE', *, *, #44248, .F. ) ; +#70095 = CARTESIAN_POINT ( 'NONE', ( -9.819172343672420300, 9.542716366279794500, -28.36017162544769100 ) ) ; +#70096 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725307500, 45.55000000000000400, -28.20555803802996700 ) ) ; +#70097 = ADVANCED_FACE ( 'NONE', ( #27703 ), #58805, .T. ) ; +#70098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70099 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#70100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#70101 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000001100, 29.75227248018356000, -28.70555803802998100 ) ) ; +#70102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70104 = EDGE_CURVE ( 'NONE', #9472, #71478, #36971, .T. ) ; +#70105 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70107 = EDGE_CURVE ( 'NONE', #27173, #7904, #46140, .T. ) ; +#70106 = FACE_OUTER_BOUND ( 'NONE', #19916, .T. ) ; +#70108 = ADVANCED_FACE ( 'NONE', ( #44171 ), #48973, .T. ) ; +#70109 = EDGE_LOOP ( 'NONE', ( #14949, #28520, #49664, #23510 ) ) ; +#70110 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#70111 = EDGE_LOOP ( 'NONE', ( #53999, #48808, #39362 ) ) ; +#70112 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#70113 = ORIENTED_EDGE ( 'NONE', *, *, #21442, .F. ) ; +#70114 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70115 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70116 = AXIS2_PLACEMENT_3D ( 'NONE', #78163, #40891, #3607 ) ; +#70117 = EDGE_CURVE ( 'NONE', #80692, #55084, #29665, .T. ) ; +#70118 = EDGE_CURVE ( 'NONE', #54919, #67715, #22535, .T. ) ; +#70119 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70120 = EDGE_CURVE ( 'NONE', #33091, #14999, #62736, .T. ) ; +#70121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70122 = ADVANCED_FACE ( 'NONE', ( #75364 ), #40300, .T. ) ; +#70123 = CONICAL_SURFACE ( 'NONE', #30493, 10.50000000000009600, 0.7853981633974500600 ) ; +#70125 = EDGE_LOOP ( 'NONE', ( #65482, #14285, #72238, #25550 ) ) ; +#70124 = EDGE_CURVE ( 'NONE', #78197, #13553, #56865, .T. ) ; +#70126 = ORIENTED_EDGE ( 'NONE', *, *, #7070, .T. ) ; +#70127 = AXIS2_PLACEMENT_3D ( 'NONE', #57866, #20619, #14354 ) ; +#70128 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70129 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70130 = ORIENTED_EDGE ( 'NONE', *, *, #57157, .F. ) ; +#70131 = FACE_OUTER_BOUND ( 'NONE', #13192, .T. ) ; +#70132 = ORIENTED_EDGE ( 'NONE', *, *, #51263, .T. ) ; +#70133 = ORIENTED_EDGE ( 'NONE', *, *, #57555, .T. ) ; +#70135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7304, #1059, #63103, #50807 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.005316570944199308600, 0.005397847036213564200 ), + .UNSPECIFIED. ) ; +#70134 = CARTESIAN_POINT ( 'NONE', ( 11.56194429656800600, 28.61613305479827600, -28.57723854182873800 ) ) ; +#70136 = EDGE_LOOP ( 'NONE', ( #39789, #48318, #28372, #20321 ) ) ; +#70137 = EDGE_LOOP ( 'NONE', ( #2225, #27279, #31904, #30312, #6218 ) ) ; +#70138 = ADVANCED_FACE ( 'NONE', ( #73427 ), #71469, .F. ) ; +#70139 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 53.50000000000000700, -4.865812075874393000 ) ) ; +#70140 = AXIS2_PLACEMENT_3D ( 'NONE', #34734, #78243, #40974 ) ; +#70141 = AXIS2_PLACEMENT_3D ( 'NONE', #75763, #57019, #7211 ) ; +#70142 = CARTESIAN_POINT ( 'NONE', ( -2.279968675731246700, 93.69934232704508800, -28.49690748628284700 ) ) ; +#70143 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#70144 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 18.50000000000001400, -7.061964498581022400 ) ) ; +#70145 = EDGE_LOOP ( 'NONE', ( #839, #11142, #51253 ) ) ; +#70146 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280406400, 33.15857157145701000, -28.37229765499281000 ) ) ; +#70147 = FACE_OUTER_BOUND ( 'NONE', #1770, .T. ) ; +#70148 = VERTEX_POINT ( 'NONE', #56059 ) ; +#70149 = CARTESIAN_POINT ( 'NONE', ( -17.06581962135468400, 27.59136393618548400, -28.49020639256002200 ) ) ; +#70150 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462829400, 61.25732391202397100, -28.20555803802997700 ) ) ; +#70151 = VERTEX_POINT ( 'NONE', #18811 ) ; +#70152 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 55.83333333333334300, 9.794441961969999600 ) ) ; +#70153 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819626700, 81.65075715145296400, -28.20555803803005900 ) ) ; +#70154 = VERTEX_POINT ( 'NONE', #62342 ) ; +#70155 = ORIENTED_EDGE ( 'NONE', *, *, #2532, .F. ) ; +#70156 = ORIENTED_EDGE ( 'NONE', *, *, #23089, .T. ) ; +#70157 = CARTESIAN_POINT ( 'NONE', ( -15.45094129026911000, 92.05094129026913700, -28.70555803803002000 ) ) ; +#70158 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534558700, 40.60079448659599400, -28.70555803802996700 ) ) ; +#70159 = CONICAL_SURFACE ( 'NONE', #77455, 10.00000000000009200, 0.7853981633974447300 ) ; +#70160 = AXIS2_PLACEMENT_3D ( 'NONE', #29658, #11145, #54647 ) ; +#70161 = VERTEX_POINT ( 'NONE', #31339 ) ; +#70162 = EDGE_CURVE ( 'NONE', #3340, #44749, #23789, .T. ) ; +#70163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70164 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70165 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489654800, 20.44069092601378300, -28.35186440610857200 ) ) ; +#70166 = CARTESIAN_POINT ( 'NONE', ( -16.44673298322516100, 70.11613117245444500, -28.57420149390117100 ) ) ; +#70167 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000019100, 81.43250300240214300, -28.20555803803014400 ) ) ; +#70168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70169 = CONICAL_SURFACE ( 'NONE', #12325, 10.50000000000009800, 0.7853981633974518300 ) ; +#70170 = ORIENTED_EDGE ( 'NONE', *, *, #44817, .F. ) ; +#70171 = EDGE_CURVE ( 'NONE', #12422, #34642, #8038, .T. ) ; +#70172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70173 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#70174 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 67.70389005397395000, -28.37519436813182900 ) ) ; +#70175 = AXIS2_PLACEMENT_3D ( 'NONE', #29414, #35633, #47830 ) ; +#70176 = AXIS2_PLACEMENT_3D ( 'NONE', #59894, #72139, #66151 ) ; +#70177 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70178 = CARTESIAN_POINT ( 'NONE', ( 16.56350803715084300, 9.244517477019531500, -28.58261694110143100 ) ) ; +#70179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70180 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818910400, 59.94924284854708700, -28.20555803802997700 ) ) ; +#70181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70182 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70183 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 69.94924284854742800, -28.20555803802997700 ) ) ; +#70184 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70185 = AXIS2_PLACEMENT_3D ( 'NONE', #60317, #23039, #66545 ) ; +#70186 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 59.33333333333334300, -8.133761268305512700 ) ) ; +#70187 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995700000, 34.11903418172681800, -28.69431509262337700 ) ) ; +#70188 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725655100, 67.93535825203925100, -28.53896444442201400 ) ) ; +#70189 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71530, #28050, #77772, #40510 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207920205000E-007, 0.0008724366121409694000 ), + .UNSPECIFIED. ) ; +#70190 = ORIENTED_EDGE ( 'NONE', *, *, #69404, .F. ) ; +#70191 = VERTEX_POINT ( 'NONE', #68585 ) ; +#70192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70193 = VERTEX_POINT ( 'NONE', #19067 ) ; +#70194 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #154, #56172, #74964, #37663 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721784400, 0.0008252574424209629600 ), + .UNSPECIFIED. ) ; +#70195 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#70196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70197 = AXIS2_PLACEMENT_3D ( 'NONE', #79858, #42562, #5326 ) ; +#70198 = CARTESIAN_POINT ( 'NONE', ( 4.230830694656807700, 90.65007990305406300, -28.43638873268721300 ) ) ; +#70199 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 71.22294471194861400, -28.20555803803047800 ) ) ; +#70200 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16225, #72000, #40970, #59750 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004054765957488069000, 0.004414112765716555700 ), + .UNSPECIFIED. ) ; +#70201 = FACE_OUTER_BOUND ( 'NONE', #54780, .T. ) ; +#70202 = VERTEX_POINT ( 'NONE', #62600 ) ; +#70204 = EDGE_CURVE ( 'NONE', #63652, #70191, #7203, .T. ) ; +#70203 = EDGE_LOOP ( 'NONE', ( #57647, #14666, #77028, #23143 ) ) ; +#70205 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510364300, 39.15930907398620100, -28.35186440610857500 ) ) ; +#70206 = ADVANCED_FACE ( 'NONE', ( #42245 ), #69500, .F. ) ; +#70207 = CIRCLE ( 'NONE', #27647, 9.500000000000099500 ) ; +#70208 = EDGE_LOOP ( 'NONE', ( #46615, #6736, #60718, #1244 ) ) ; +#70209 = ORIENTED_EDGE ( 'NONE', *, *, #69615, .F. ) ; +#70210 = CARTESIAN_POINT ( 'NONE', ( -16.33257079600105400, 14.62986017865679900, -28.62099087449130900 ) ) ; +#70211 = ORIENTED_EDGE ( 'NONE', *, *, #63954, .F. ) ; +#70212 = ADVANCED_FACE ( 'NONE', ( #21829 ), #36407, .F. ) ; +#70213 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 24.50000000000001800, 4.650848422521012700 ) ) ; +#70214 = VERTEX_POINT ( 'NONE', #62879 ) ; +#70215 = VERTEX_POINT ( 'NONE', #25623 ) ; +#70216 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51636, #1880, #70426, #33182 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674730639129700E-007, 0.0002745102201808978700 ), + .UNSPECIFIED. ) ; +#70217 = CONICAL_SURFACE ( 'NONE', #49401, 10.50000000000009600, 0.7853981633974500600 ) ; +#70218 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001000, 39.53085164125334900, -28.45573375118225800 ) ) ; +#70219 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#70220 = ADVANCED_FACE ( 'NONE', ( #5277 ), #3305, .T. ) ; +#70221 = EDGE_CURVE ( 'NONE', #56108, #49684, #74404, .T. ) ; +#70222 = CIRCLE ( 'NONE', #6164, 9.500000000000099500 ) ; +#70223 = VERTEX_POINT ( 'NONE', #50577 ) ; +#70224 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#70225 = ORIENTED_EDGE ( 'NONE', *, *, #79178, .F. ) ; +#70226 = EDGE_CURVE ( 'NONE', #77263, #25749, #59950, .T. ) ; +#70227 = VERTEX_POINT ( 'NONE', #7078 ) ; +#70228 = ORIENTED_EDGE ( 'NONE', *, *, #80168, .T. ) ; +#70229 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#70230 = EDGE_LOOP ( 'NONE', ( #13189, #1406, #59140, #44593 ) ) ; +#70231 = FACE_OUTER_BOUND ( 'NONE', #1216, .T. ) ; +#70232 = CARTESIAN_POINT ( 'NONE', ( -9.881082274201249400, 61.10238820582981800, -28.32098513914462500 ) ) ; +#70233 = EDGE_CURVE ( 'NONE', #25269, #32815, #45413, .T. ) ; +#70234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70235 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56109, #49817, #6347, #18850 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711478392300E-007, 0.0008482615949374496800 ), + .UNSPECIFIED. ) ; +#70236 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#70237 = CARTESIAN_POINT ( 'NONE', ( -16.78574144345591200, 80.07527064970103900, -28.39317435246135100 ) ) ; +#70238 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 68.00000000000000000, -1.205558038030005300 ) ) ; +#70239 = ORIENTED_EDGE ( 'NONE', *, *, #60256, .T. ) ; +#70240 = EDGE_CURVE ( 'NONE', #48190, #55596, #31018, .T. ) ; +#70241 = AXIS2_PLACEMENT_3D ( 'NONE', #36245, #67253, #23755 ) ; +#70242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70243 = PLANE ( 'NONE', #14062 ) ; +#70244 = CIRCLE ( 'NONE', #8580, 9.500000000000099500 ) ; +#70245 = VERTEX_POINT ( 'NONE', #44563 ) ; +#70246 = ORIENTED_EDGE ( 'NONE', *, *, #75317, .T. ) ; +#70247 = CARTESIAN_POINT ( 'NONE', ( -15.05231272353723600, 65.84128927986392900, -28.70545447299020500 ) ) ; +#70248 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805681800, 26.18572799237471200, -28.67630847257083500 ) ) ; +#70249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70250 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#70251 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70253 = AXIS2_PLACEMENT_3D ( 'NONE', #30645, #61647, #67881 ) ; +#70254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70255 = CARTESIAN_POINT ( 'NONE', ( 10.46481234601706400, 9.406791769321971600, -28.68794773163825000 ) ) ; +#70256 = EDGE_CURVE ( 'NONE', #25486, #3570, #25753, .T. ) ; +#70257 = EDGE_CURVE ( 'NONE', #35598, #46378, #16557, .T. ) ; +#70258 = AXIS2_PLACEMENT_3D ( 'NONE', #53647, #16401, #59928 ) ; +#70259 = CARTESIAN_POINT ( 'NONE', ( -24.99999999997169600, 2.869893161101600300E-011, -19.62890550647757200 ) ) ; +#70260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70261 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 30.33333333333333900, -3.705558038030004400 ) ) ; +#70262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70263 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#70264 = ORIENTED_EDGE ( 'NONE', *, *, #49973, .F. ) ; +#70265 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70267 = ORIENTED_EDGE ( 'NONE', *, *, #4124, .T. ) ; +#70268 = EDGE_CURVE ( 'NONE', #5664, #67647, #19886, .T. ) ; +#70269 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260790400, 20.39965687931247700, -28.70555803803001600 ) ) ; +#70270 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 30.74660241562181500, -28.20555803802995200 ) ) ; +#70271 = CARTESIAN_POINT ( 'NONE', ( 11.50207502155150200, 90.99854748491375700, -28.70555803803047500 ) ) ; +#70272 = AXIS2_PLACEMENT_3D ( 'NONE', #77528, #40249, #2986 ) ; +#70273 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804073200, 36.94142842854297000, -28.37229765499279600 ) ) ; +#70274 = AXIS2_PLACEMENT_3D ( 'NONE', #19419, #62957, #25701 ) ; +#70275 = CARTESIAN_POINT ( 'NONE', ( -17.70883560898058600, 49.88105266879261300, -28.33409528117009300 ) ) ; +#70276 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70277 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807186800, 54.80000000000003300, -28.70555803802997700 ) ) ; +#70278 = CARTESIAN_POINT ( 'NONE', ( -4.239894507328253700, 69.66414768974043200, -28.38420446581291800 ) ) ; +#70279 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#70280 = CONICAL_SURFACE ( 'NONE', #23097, 10.00000000000009200, 0.7853981633974447300 ) ; +#70281 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#70282 = ORIENTED_EDGE ( 'NONE', *, *, #78878, .F. ) ; +#70283 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472572200, 14.36787096422346400, -28.37244029424764200 ) ) ; +#70284 = CARTESIAN_POINT ( 'NONE', ( 9.655202348769030600, 40.81139552890385100, -28.53900456328628400 ) ) ; +#70285 = FACE_OUTER_BOUND ( 'NONE', #27712, .T. ) ; +#70286 = EDGE_LOOP ( 'NONE', ( #76813, #7224, #4606, #25859 ) ) ; +#70287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70288 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807153100, 76.79999999999998300, -28.70555803802997700 ) ) ; +#70289 = ORIENTED_EDGE ( 'NONE', *, *, #8381, .T. ) ; +#70290 = FACE_OUTER_BOUND ( 'NONE', #75222, .T. ) ; +#70291 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260079000, 71.39965687931105300, -28.70555803803001300 ) ) ; +#70292 = VERTEX_POINT ( 'NONE', #44849 ) ; +#70293 = EDGE_LOOP ( 'NONE', ( #43309, #73074, #67897, #73110, #69916 ) ) ; +#70294 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70295 = ORIENTED_EDGE ( 'NONE', *, *, #33566, .F. ) ; +#70296 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70298 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#70299 = FACE_OUTER_BOUND ( 'NONE', #18862, .T. ) ; +#70300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70301 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32203, #69455, #44654, #7427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002681079286020305200, 0.0005869108620980542400 ), + .UNSPECIFIED. ) ; +#70302 = EDGE_LOOP ( 'NONE', ( #71309, #11797, #18590, #20235 ) ) ; +#70303 = AXIS2_PLACEMENT_3D ( 'NONE', #49233, #18534, #62069 ) ; +#70304 = CIRCLE ( 'NONE', #66576, 10.50000000000009600 ) ; +#70305 = ORIENTED_EDGE ( 'NONE', *, *, #61217, .T. ) ; +#70306 = ORIENTED_EDGE ( 'NONE', *, *, #75710, .F. ) ; +#70307 = ORIENTED_EDGE ( 'NONE', *, *, #91, .T. ) ; +#70308 = ORIENTED_EDGE ( 'NONE', *, *, #43798, .F. ) ; +#70309 = CARTESIAN_POINT ( 'NONE', ( -15.11625473641674100, 24.54999999999998300, -28.53994725305375400 ) ) ; +#70310 = FACE_OUTER_BOUND ( 'NONE', #45521, .T. ) ; +#70311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22187, #59456, #65718, #28484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962720290400, 0.0008252574424208172400 ), + .UNSPECIFIED. ) ; +#70312 = ORIENTED_EDGE ( 'NONE', *, *, #14126, .T. ) ; +#70313 = ADVANCED_FACE ( 'NONE', ( #38335 ), #17927, .T. ) ; +#70314 = CONICAL_SURFACE ( 'NONE', #57559, 10.50000000000009600, 0.7853981633974500600 ) ; +#70315 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 1.833333333333333000, -6.205558038030004800 ) ) ; +#70316 = AXIS2_PLACEMENT_3D ( 'NONE', #38984, #38178, #45232 ) ; +#70317 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30396, #24122, #36602, #80130 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001043664170964443900 ), + .UNSPECIFIED. ) ; +#70318 = CARTESIAN_POINT ( 'NONE', ( 5.339745962155229900, 55.80000000000015300, -28.20555803803030800 ) ) ; +#70319 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 39.35339758437810100, -28.20555803802995200 ) ) ; +#70320 = EDGE_CURVE ( 'NONE', #56550, #19770, #34487, .T. ) ; +#70321 = ORIENTED_EDGE ( 'NONE', *, *, #27756, .T. ) ; +#70322 = EDGE_LOOP ( 'NONE', ( #75862, #54134, #2243 ) ) ; +#70323 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 47.44142842854306300, -28.20555803802996700 ) ) ; +#70324 = AXIS2_PLACEMENT_3D ( 'NONE', #8444, #33221, #51947 ) ; +#70325 = CIRCLE ( 'NONE', #13276, 9.500000000000101300 ) ; +#70326 = EDGE_LOOP ( 'NONE', ( #57296, #79715, #12095 ) ) ; +#70327 = CONICAL_SURFACE ( 'NONE', #31130, 10.50000000000009600, 0.7853981633974518300 ) ; +#70328 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73313, #36297, #48775, #11570 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279228135470000E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#70329 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 41.23796787468682400, -28.38801640354855100 ) ) ; +#70330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70332 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50110, #25424, #62675, #37887 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.002676326193402451700 ), + .UNSPECIFIED. ) ; +#70333 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#70334 = ADVANCED_FACE ( 'NONE', ( #52945 ), #49023, .T. ) ; +#70335 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 22.43454006867178000, -28.70555803802998100 ) ) ; +#70336 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70337 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70338 = CARTESIAN_POINT ( 'NONE', ( -12.35418691387501300, 66.46717019299462900, -28.53914313452728600 ) ) ; +#70339 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042481200, 11.09027028261002800, -28.70555803802993500 ) ) ; +#70340 = EDGE_CURVE ( 'NONE', #70545, #7631, #2045, .T. ) ; +#70341 = EDGE_CURVE ( 'NONE', #55231, #15321, #50974, .T. ) ; +#70342 = ORIENTED_EDGE ( 'NONE', *, *, #70171, .T. ) ; +#70343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70344 = CARTESIAN_POINT ( 'NONE', ( -2.279233496942131100, 80.09951448976265500, -28.63282631410022500 ) ) ; +#70345 = CARTESIAN_POINT ( 'NONE', ( 16.56643609059977300, 25.72507724664476900, -28.58387515229124900 ) ) ; +#70347 = EDGE_LOOP ( 'NONE', ( #8133, #34196, #6887, #59139, #39355, #40092, #77887 ) ) ; +#70346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70348 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#70349 = EDGE_CURVE ( 'NONE', #57903, #49536, #68394, .T. ) ; +#70350 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 20.07757630314203800, -28.53861367218591000 ) ) ; +#70351 = EDGE_CURVE ( 'NONE', #38217, #11971, #53931, .T. ) ; +#70352 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045500, 70.16749699759739700, -28.20555803803047800 ) ) ; +#70353 = CIRCLE ( 'NONE', #66820, 10.00000000000009600 ) ; +#70354 = EDGE_LOOP ( 'NONE', ( #48016, #74098, #46741 ) ) ; +#70355 = AXIS2_PLACEMENT_3D ( 'NONE', #33066, #51799, #39309 ) ; +#70356 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#70357 = FACE_OUTER_BOUND ( 'NONE', #57453, .T. ) ; +#70358 = VERTEX_POINT ( 'NONE', #58202 ) ; +#70359 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 7.666666666666682900, -5.205558038030003100 ) ) ; +#70360 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#70361 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 81.25732391202375000, -28.20555803803014400 ) ) ; +#70362 = ORIENTED_EDGE ( 'NONE', *, *, #59644, .F. ) ; +#70363 = CONICAL_SURFACE ( 'NONE', #24112, 10.50000000000009600, 0.7853981633974482800 ) ; +#70364 = VERTEX_POINT ( 'NONE', #51911 ) ; +#70365 = EDGE_LOOP ( 'NONE', ( #6387, #2402, #8393, #3238 ) ) ; +#70366 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736748100, 14.04999999999975700, -28.70555803803009500 ) ) ; +#70367 = CARTESIAN_POINT ( 'NONE', ( -10.37141821671362000, 70.16749699759769500, -28.25056166218020700 ) ) ; +#70368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70369 = AXIS2_PLACEMENT_3D ( 'NONE', #53752, #60040, #35021 ) ; +#70370 = CARTESIAN_POINT ( 'NONE', ( -17.91685310518276000, 81.67042952585912000, -28.27315057468851500 ) ) ; +#70371 = FACE_OUTER_BOUND ( 'NONE', #55209, .T. ) ; +#70372 = EDGE_CURVE ( 'NONE', #67972, #35911, #39463, .T. ) ; +#70373 = EDGE_CURVE ( 'NONE', #12827, #19219, #25024, .T. ) ; +#70374 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65564, #22027, #3498, #46998 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634334333100E-007, 0.0008082706238601599700 ), + .UNSPECIFIED. ) ; +#70375 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#70376 = EDGE_CURVE ( 'NONE', #64449, #19042, #10562, .T. ) ; +#70377 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#70378 = CARTESIAN_POINT ( 'NONE', ( -4.561944296567993700, 28.61613305479827200, -28.57723854182873800 ) ) ; +#70379 = VERTEX_POINT ( 'NONE', #64768 ) ; +#70380 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343285500, 28.85339758437810400, -28.20555803802994200 ) ) ; +#70381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70382 = CIRCLE ( 'NONE', #75394, 10.00000000000009600 ) ; +#70383 = AXIS2_PLACEMENT_3D ( 'NONE', #30392, #73896, #36597 ) ; +#70384 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#70385 = ORIENTED_EDGE ( 'NONE', *, *, #14710, .F. ) ; +#70386 = EDGE_LOOP ( 'NONE', ( #55400, #7424, #3952 ) ) ; +#70387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70388 = ORIENTED_EDGE ( 'NONE', *, *, #43056, .T. ) ; +#70389 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260018200, 49.70034312068833800, -28.70555803803001600 ) ) ; +#70390 = ORIENTED_EDGE ( 'NONE', *, *, #8987, .T. ) ; +#70391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70392 = EDGE_CURVE ( 'NONE', #30909, #45860, #65628, .T. ) ; +#70393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70394 = VECTOR ( 'NONE', #77630, 1000.000000000000000 ) ; +#70395 = AXIS2_PLACEMENT_3D ( 'NONE', #38851, #1601, #45082 ) ; +#70396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70397 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 81.68929190448938000, -28.20555803802997700 ) ) ; +#70398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70399 = ADVANCED_FACE ( 'NONE', ( #67565 ), #63679, .F. ) ; +#70400 = VERTEX_POINT ( 'NONE', #27769 ) ; +#70401 = EDGE_LOOP ( 'NONE', ( #37338, #14689, #55945, #50758 ) ) ; +#70402 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70403 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 64.37738371066728900, -28.70555803802997700 ) ) ; +#70404 = ORIENTED_EDGE ( 'NONE', *, *, #9369, .F. ) ; +#70405 = FACE_OUTER_BOUND ( 'NONE', #18947, .T. ) ; +#70406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70407 = ADVANCED_FACE ( 'NONE', ( #54912 ), #30588, .T. ) ; +#70408 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 51.33333333333333600, 1.294441961969997200 ) ) ; +#70410 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#70409 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28644, #47316, #22608, #66147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633005785048800E-007, 0.0004089065559709823600 ), + .UNSPECIFIED. ) ; +#70411 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000002300, 87.60073525436787600, -28.70555803803001600 ) ) ; +#70412 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 16.33333333333333900, 2.794441961969998300 ) ) ; +#70413 = AXIS2_PLACEMENT_3D ( 'NONE', #28676, #41134, #65910 ) ; +#70414 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#70415 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466628200, 29.33106028708539300, -28.57333386111660200 ) ) ; +#70416 = LINE ( 'NONE', #75877, #66536 ) ; +#70417 = CARTESIAN_POINT ( 'NONE', ( 4.205848596537302700, 61.39409401757608700, -28.39369363572369300 ) ) ; +#70418 = ADVANCED_FACE ( 'NONE', ( #80209 ), #78273, .F. ) ; +#70419 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 53.66666666666668600, -10.73183747965883100 ) ) ; +#70420 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57711, #14209, #64001, #26738, #70210, #32958 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409440000, 0.003857515824818880000 ), + .UNSPECIFIED. ) ; +#70421 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#70422 = ORIENTED_EDGE ( 'NONE', *, *, #75594, .F. ) ; +#70423 = AXIS2_PLACEMENT_3D ( 'NONE', #1114, #19643, #57169 ) ; +#70424 = ORIENTED_EDGE ( 'NONE', *, *, #49488, .T. ) ; +#70425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70426 = CARTESIAN_POINT ( 'NONE', ( 3.040273598549601400, 39.22437813624630100, -28.30310527599300500 ) ) ; +#70427 = EDGE_LOOP ( 'NONE', ( #17588, #4859, #42508 ) ) ; +#70428 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#70429 = ADVANCED_FACE ( 'NONE', ( #15980 ), #45105, .F. ) ; +#70430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70431 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999997300, 52.97376207875059600, -28.70555803802997700 ) ) ; +#70432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70433 = FACE_OUTER_BOUND ( 'NONE', #56817, .T. ) ; +#70434 = ORIENTED_EDGE ( 'NONE', *, *, #6080, .T. ) ; +#70435 = FACE_OUTER_BOUND ( 'NONE', #63495, .T. ) ; +#70436 = AXIS2_PLACEMENT_3D ( 'NONE', #39271, #2009, #45496 ) ; +#70437 = ORIENTED_EDGE ( 'NONE', *, *, #44005, .T. ) ; +#70438 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70439 = CIRCLE ( 'NONE', #7869, 10.00000000000009200 ) ; +#70440 = EDGE_LOOP ( 'NONE', ( #27631, #48920, #6715, #26193 ) ) ; +#70441 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957525000, 27.50972971738994100, -28.70555803802994500 ) ) ; +#70442 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215567300, 55.46616414991774500, -28.37247596307122400 ) ) ; +#70443 = ORIENTED_EDGE ( 'NONE', *, *, #29316, .F. ) ; +#70444 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343282000, 20.24660241562182300, -28.20555803802994200 ) ) ; +#70446 = ORIENTED_EDGE ( 'NONE', *, *, #22400, .T. ) ; +#70445 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70447 = CARTESIAN_POINT ( 'NONE', ( -16.88108227420125500, 71.10238820582981100, -28.32098513914461800 ) ) ; +#70448 = CARTESIAN_POINT ( 'NONE', ( -3.500479402801542700, 80.69966441803890700, -28.70555803802997700 ) ) ; +#70449 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 12.15857157145701000, -28.20555803802994200 ) ) ; +#70450 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#70451 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12497, #55986, #31265, #74775 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278946114700, 0.001517194977238246400 ), + .UNSPECIFIED. ) ; +#70452 = CIRCLE ( 'NONE', #39893, 10.00000000000009600 ) ; +#70453 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416051300, 18.58874248361070900, -28.53740755999532700 ) ) ; +#70454 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70455 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805679900, 33.41427200762528600, -28.67630847257083800 ) ) ; +#70456 = VERTEX_POINT ( 'NONE', #9214 ) ; +#70457 = CONICAL_SURFACE ( 'NONE', #30042, 10.00000000000009400, 0.7853981633974447300 ) ; +#70458 = EDGE_CURVE ( 'NONE', #33093, #426, #47073, .T. ) ; +#70459 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 57.16666666666667900, 6.794441961969992500 ) ) ; +#70460 = ORIENTED_EDGE ( 'NONE', *, *, #24030, .F. ) ; +#70461 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70463 = EDGE_CURVE ( 'NONE', #4753, #52770, #76861, .T. ) ; +#70462 = ORIENTED_EDGE ( 'NONE', *, *, #17967, .T. ) ; +#70464 = ORIENTED_EDGE ( 'NONE', *, *, #14025, .F. ) ; +#70465 = CARTESIAN_POINT ( 'NONE', ( -1.946998007594818400E-013, 53.89610994602597300, -28.37519436813192500 ) ) ; +#70466 = ORIENTED_EDGE ( 'NONE', *, *, #51517, .T. ) ; +#70467 = FACE_OUTER_BOUND ( 'NONE', #27614, .T. ) ; +#70468 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280398600, 73.65857157145646300, -28.37229765499320400 ) ) ; +#70469 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459459400, 72.51973550835671700, -28.70555803803004500 ) ) ; +#70470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70472 = ORIENTED_EDGE ( 'NONE', *, *, #36990, .F. ) ; +#70473 = CARTESIAN_POINT ( 'NONE', ( 17.07380754911110500, 80.40166528437728700, -28.28704243186590300 ) ) ; +#70474 = EDGE_CURVE ( 'NONE', #68875, #73316, #1349, .T. ) ; +#70475 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3411, #40675, #15946, #59474 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460910753631700E-007, 0.0008482521192571711600 ), + .UNSPECIFIED. ) ; +#70476 = EDGE_CURVE ( 'NONE', #68073, #52871, #9147, .T. ) ; +#70477 = ORIENTED_EDGE ( 'NONE', *, *, #76322, .F. ) ; +#70478 = ORIENTED_EDGE ( 'NONE', *, *, #32965, .F. ) ; +#70479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70480 = EDGE_CURVE ( 'NONE', #51949, #28113, #61738, .T. ) ; +#70481 = ORIENTED_EDGE ( 'NONE', *, *, #67238, .F. ) ; +#70482 = CONICAL_SURFACE ( 'NONE', #18457, 10.00000000000009600, 0.7853981633974482800 ) ; +#70483 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.70555803802997700 ) ) ; +#70484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70485 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 22.33333333333334300, -8.133761268305512700 ) ) ; +#70486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70487 = AXIS2_PLACEMENT_3D ( 'NONE', #3164, #15704, #40443 ) ; +#70488 = EDGE_CURVE ( 'NONE', #25229, #68193, #14029, .T. ) ; +#70489 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70490 = EDGE_CURVE ( 'NONE', #37505, #13142, #28668, .T. ) ; +#70491 = EDGE_CURVE ( 'NONE', #27539, #33691, #62410, .T. ) ; +#70492 = ADVANCED_FACE ( 'NONE', ( #12079 ), #74373, .F. ) ; +#70493 = AXIS2_PLACEMENT_3D ( 'NONE', #24706, #68217, #30970 ) ; +#70494 = CONICAL_SURFACE ( 'NONE', #65349, 10.00000000000009200, 0.7853981633974447300 ) ; +#70495 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492446100, 38.57379779496243800, -28.70555803802996700 ) ) ; +#70496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48647, #29966, #79971, #42675 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160286541700, 0.0006028148015508467700 ), + .UNSPECIFIED. ) ; +#70497 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 90.07141756547892400, -28.70555803802997700 ) ) ; +#70498 = ORIENTED_EDGE ( 'NONE', *, *, #56932, .T. ) ; +#70499 = ADVANCED_FACE ( 'NONE', ( #59780 ), #53828, .T. ) ; +#70500 = AXIS2_PLACEMENT_3D ( 'NONE', #53172, #34706, #28212 ) ; +#70501 = AXIS2_PLACEMENT_3D ( 'NONE', #36179, #79697, #42407 ) ; +#70502 = CARTESIAN_POINT ( 'NONE', ( -17.24297557446558200, 60.16517473503392200, -28.29551658696701800 ) ) ; +#70503 = ORIENTED_EDGE ( 'NONE', *, *, #57611, .F. ) ; +#70504 = CARTESIAN_POINT ( 'NONE', ( -2.254548258615124600, 39.09617684379259800, -28.64146614751465200 ) ) ; +#70505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70506 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 65.83333333333334300, 0.9380355014189731800 ) ) ; +#70507 = FACE_OUTER_BOUND ( 'NONE', #40386, .T. ) ; +#70508 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#70509 = CONICAL_SURFACE ( 'NONE', #42395, 10.00000000000009200, 0.7853981633974447300 ) ; +#70510 = CARTESIAN_POINT ( 'NONE', ( 9.540979117872439000E-015, 21.97376207875059600, -28.70555803802995200 ) ) ; +#70511 = ORIENTED_EDGE ( 'NONE', *, *, #26793, .T. ) ; +#70512 = ADVANCED_FACE ( 'NONE', ( #10127 ), #24716, .T. ) ; +#70513 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#70514 = VERTEX_POINT ( 'NONE', #35368 ) ; +#70515 = CIRCLE ( 'NONE', #68297, 10.00000000000009400 ) ; +#70516 = CONICAL_SURFACE ( 'NONE', #71595, 10.50000000000009800, 0.7853981633974518300 ) ; +#70517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70518 = EDGE_LOOP ( 'NONE', ( #66296, #74477, #21630, #76372 ) ) ; +#70519 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70521 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846179900, 70.79999999999982700, -28.55171188418389900 ) ) ; +#70522 = EDGE_LOOP ( 'NONE', ( #79609, #13098, #60566, #50610, #25551 ) ) ; +#70523 = AXIS2_PLACEMENT_3D ( 'NONE', #66565, #29352, #72832 ) ; +#70524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70525 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528358700, 9.968680884981202100, -28.51286550264501000 ) ) ; +#70526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70527 = ADVANCED_FACE ( 'NONE', ( #26684 ), #72427, .F. ) ; +#70528 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#70530 = FACE_OUTER_BOUND ( 'NONE', #69092, .T. ) ; +#70529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70531 = CARTESIAN_POINT ( 'NONE', ( -19.55260919700840800, 0.8947816059826969600, -22.88564861210957000 ) ) ; +#70532 = ORIENTED_EDGE ( 'NONE', *, *, #45596, .F. ) ; +#70534 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 28.16666666666667500, 0.1341879241256129200 ) ) ; +#70533 = FACE_OUTER_BOUND ( 'NONE', #72531, .T. ) ; +#70535 = ORIENTED_EDGE ( 'NONE', *, *, #79547, .T. ) ; +#70536 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 50.89350487330096900, -28.45034744217088700 ) ) ; +#70537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70538 = EDGE_CURVE ( 'NONE', #10012, #63070, #32518, .T. ) ; +#70539 = ORIENTED_EDGE ( 'NONE', *, *, #18066, .F. ) ; +#70540 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70541 = ORIENTED_EDGE ( 'NONE', *, *, #50179, .T. ) ; +#70542 = AXIS2_PLACEMENT_3D ( 'NONE', #8261, #14557, #45508 ) ; +#70543 = VERTEX_POINT ( 'NONE', #66621 ) ; +#70544 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#70545 = VERTEX_POINT ( 'NONE', #29403 ) ; +#70546 = CARTESIAN_POINT ( 'NONE', ( 9.497924978448480700, 50.60145251508584600, -28.70555803803014400 ) ) ; +#70547 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#70548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70549 = ADVANCED_FACE ( 'NONE', ( #8131 ), #6217, .T. ) ; +#70550 = FACE_OUTER_BOUND ( 'NONE', #73546, .T. ) ; +#70551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70553 = EDGE_LOOP ( 'NONE', ( #20038, #40979, #41589 ) ) ; +#70552 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428227000, 71.52858243452108400, -28.70555803803014400 ) ) ; +#70554 = CARTESIAN_POINT ( 'NONE', ( 3.756937565509312500, 71.43482212736776700, -28.29548618595838900 ) ) ; +#70555 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#70556 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 70.16054007504432400, -28.34042301926905700 ) ) ; +#70557 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18993, #13041, #31795, #75303 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571861400, 0.0008043487657981983800 ), + .UNSPECIFIED. ) ; +#70558 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999957000, 71.62753447840813700, -28.38801640354866900 ) ) ; +#70559 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465429700, 39.99920551340398600, -28.70555803802995200 ) ) ; +#70560 = CARTESIAN_POINT ( 'NONE', ( -10.03177803894783300, 60.28233213024647300, -28.25051428653848300 ) ) ; +#70561 = VERTEX_POINT ( 'NONE', #79141 ) ; +#70562 = CARTESIAN_POINT ( 'NONE', ( 9.466255859631179000, 91.59999999999999400, -28.70555803802999500 ) ) ; +#70563 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#70564 = AXIS2_PLACEMENT_3D ( 'NONE', #22040, #28058, #59287 ) ; +#70565 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627436700, 43.66464174796073600, -28.53896444442202800 ) ) ; +#70566 = EDGE_LOOP ( 'NONE', ( #79694, #14947, #75680 ) ) ; +#70567 = FACE_OUTER_BOUND ( 'NONE', #1992, .T. ) ; +#70568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70570 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.80000000000008600, -28.70555803802994200 ) ) ; +#70571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70572 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462297600, 51.39409401757606600, -28.39369363572379600 ) ) ; +#70573 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188003500, 9.569148358746641500, -28.45573375118225100 ) ) ; +#70574 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#70575 = CARTESIAN_POINT ( 'NONE', ( -17.41531457165532600, 71.18368596002118000, -28.40988208712491300 ) ) ; +#70576 = EDGE_CURVE ( 'NONE', #75642, #40556, #47919, .T. ) ; +#70577 = CIRCLE ( 'NONE', #61637, 10.50000000000009600 ) ; +#70578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70579 = ORIENTED_EDGE ( 'NONE', *, *, #74198, .T. ) ; +#70580 = EDGE_LOOP ( 'NONE', ( #14245, #2085, #66969 ) ) ; +#70581 = CIRCLE ( 'NONE', #41610, 9.500000000000097700 ) ; +#70582 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, -0.3333333333333209400, 3.124568980892192800 ) ) ; +#70583 = EDGE_LOOP ( 'NONE', ( #48583, #9227, #61384, #78540, #450 ) ) ; +#70584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70585 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70587 = CIRCLE ( 'NONE', #15097, 10.50000000000009600 ) ; +#70588 = CONICAL_SURFACE ( 'NONE', #30422, 10.50000000000009600, 0.7853981633974482800 ) ; +#70589 = EDGE_CURVE ( 'NONE', #50710, #10656, #41253, .T. ) ; +#70590 = VERTEX_POINT ( 'NONE', #60649 ) ; +#70591 = EDGE_CURVE ( 'NONE', #66575, #6871, #57810, .T. ) ; +#70592 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 28.53751622186546300, -28.32723995587590700 ) ) ; +#70593 = FACE_OUTER_BOUND ( 'NONE', #51714, .T. ) ; +#70594 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58934, #2901, #46383, #21703, #65240, #27975 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001587068747398933800, 0.003174137494797867700 ), + .UNSPECIFIED. ) ; +#70595 = VERTEX_POINT ( 'NONE', #10865 ) ; +#70596 = VERTEX_POINT ( 'NONE', #60919 ) ; +#70597 = ADVANCED_FACE ( 'NONE', ( #39290 ), #20820, .T. ) ; +#70598 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #44207, #6979 ) ; +#70599 = EDGE_CURVE ( 'NONE', #20304, #36273, #37320, .T. ) ; +#70600 = EDGE_CURVE ( 'NONE', #37899, #49578, #43190, .T. ) ; +#70601 = EDGE_CURVE ( 'NONE', #55084, #42984, #53894, .T. ) ; +#70602 = CIRCLE ( 'NONE', #44600, 10.00000000000009600 ) ; +#70603 = CARTESIAN_POINT ( 'NONE', ( 2.194425197110661000E-013, 68.62623792124919900, -28.70555803802997700 ) ) ; +#70604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70605 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819169800, 69.94924284854653300, -28.20555803803030800 ) ) ; +#70606 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 43.16666666666667900, -12.20555803803000000 ) ) ; +#70607 = CIRCLE ( 'NONE', #61728, 10.00000000000009200 ) ; +#70608 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .F. ) ; +#70609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70610 = AXIS2_PLACEMENT_3D ( 'NONE', #67809, #30567, #74072 ) ; +#70611 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#70612 = ORIENTED_EDGE ( 'NONE', *, *, #72634, .F. ) ; +#70613 = ADVANCED_FACE ( 'NONE', ( #22772 ), #18856, .T. ) ; +#70614 = ORIENTED_EDGE ( 'NONE', *, *, #34216, .F. ) ; +#70615 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507583200, 38.57379779496243800, -28.70555803802995200 ) ) ; +#70616 = VERTEX_POINT ( 'NONE', #11678 ) ; +#70617 = CARTESIAN_POINT ( 'NONE', ( -10.71549095928863700, 92.73594724051950800, -28.65532419784739200 ) ) ; +#70618 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70619 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#70621 = ADVANCED_FACE ( 'NONE', ( #4264 ), #66554, .F. ) ; +#70620 = VERTEX_POINT ( 'NONE', #55158 ) ; +#70622 = CYLINDRICAL_SURFACE ( 'NONE', #36452, 10.00000000000000000 ) ; +#70623 = AXIS2_PLACEMENT_3D ( 'NONE', #31314, #74817, #37522 ) ; +#70624 = AXIS2_PLACEMENT_3D ( 'NONE', #48302, #11088, #54589 ) ; +#70625 = ORIENTED_EDGE ( 'NONE', *, *, #51972, .T. ) ; +#70626 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 20.46868088498122200, -28.51286550264510200 ) ) ; +#70627 = AXIS2_PLACEMENT_3D ( 'NONE', #23682, #67182, #29962 ) ; +#70628 = ORIENTED_EDGE ( 'NONE', *, *, #9585, .T. ) ; +#70629 = ADVANCED_FACE ( 'NONE', ( #55836 ), #33451, .F. ) ; +#70630 = CARTESIAN_POINT ( 'NONE', ( 10.57226108320770000, 8.799999999999503300, -28.63329695482264000 ) ) ; +#70631 = ORIENTED_EDGE ( 'NONE', *, *, #13944, .F. ) ; +#70632 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70633 = FACE_OUTER_BOUND ( 'NONE', #46878, .T. ) ; +#70634 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462474400, 51.39409401757625800, -28.39369363572360100 ) ) ; +#70635 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 18.16749699759768800, -28.20555803802992800 ) ) ; +#70636 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 5.500000000000016900, 4.650848422521012700 ) ) ; +#70637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70638 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390328900, 71.46283204837320100, -28.48697406221674600 ) ) ; +#70639 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 26.66545993132818300, -28.70555803802997700 ) ) ; +#70640 = ORIENTED_EDGE ( 'NONE', *, *, #52996, .T. ) ; +#70641 = CONICAL_SURFACE ( 'NONE', #19398, 10.50000000000009600, 0.7853981633974500600 ) ; +#70642 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877852800, 50.07332680091207100, -28.37233769390156700 ) ) ; +#70643 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#70644 = AXIS2_PLACEMENT_3D ( 'NONE', #15354, #58856, #21618 ) ; +#70645 = EDGE_CURVE ( 'NONE', #7904, #23429, #33491, .T. ) ; +#70646 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70647 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819203500, 71.65075715145309200, -28.20555803802997700 ) ) ; +#70648 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18139, #36620, #67917, #30668 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0002673660010786276900 ), + .UNSPECIFIED. ) ; +#70649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70651 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 58.16545993132821500, -28.70555803802999500 ) ) ; +#70652 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609194500, 44.91466791010193300, -28.53910738522645500 ) ) ; +#70653 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70654 = CONICAL_SURFACE ( 'NONE', #53739, 10.50000000000009600, 0.7853981633974500600 ) ; +#70656 = EDGE_CURVE ( 'NONE', #70072, #368, #19012, .T. ) ; +#70655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16264, #41005, #3998, #47483 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635341553200E-007, 0.0008082706238602418300 ), + .UNSPECIFIED. ) ; +#70657 = FACE_OUTER_BOUND ( 'NONE', #31093, .T. ) ; +#70658 = AXIS2_PLACEMENT_3D ( 'NONE', #39744, #33768, #8977 ) ; +#70659 = EDGE_LOOP ( 'NONE', ( #45304, #24368, #19190, #7824, #21249 ) ) ; +#70660 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30823, #18297, #37039, #80577 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696348088800E-007, 0.0008724363063897108900 ), + .UNSPECIFIED. ) ; +#70661 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#70662 = ORIENTED_EDGE ( 'NONE', *, *, #14604, .T. ) ; +#70663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70664 = CONICAL_SURFACE ( 'NONE', #72852, 10.00000000000009200, 0.7853981633974447300 ) ; +#70665 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999929800, 77.22261628933232200, -28.70555803803030800 ) ) ; +#70667 = ORIENTED_EDGE ( 'NONE', *, *, #75696, .F. ) ; +#70666 = CARTESIAN_POINT ( 'NONE', ( 3.851608249733740900E-014, 53.42856308690593200, -28.36981695106780800 ) ) ; +#70668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70669 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57339, #20097, #63627, #26368 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.469999434971913000E-017, 0.001043664170964717300 ), + .UNSPECIFIED. ) ; +#70670 = CONICAL_SURFACE ( 'NONE', #64578, 10.00000000000009200, 0.7853981633974447300 ) ; +#70671 = AXIS2_PLACEMENT_3D ( 'NONE', #74574, #37270, #20 ) ; +#70672 = FACE_OUTER_BOUND ( 'NONE', #72586, .T. ) ; +#70673 = VERTEX_POINT ( 'NONE', #36929 ) ; +#70674 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454054600, 69.08026449164295000, -28.70555803803030800 ) ) ; +#70675 = CARTESIAN_POINT ( 'NONE', ( 3.221259145455632700, 49.66476764525111800, -28.30311733712049700 ) ) ; +#70676 = ORIENTED_EDGE ( 'NONE', *, *, #78505, .T. ) ; +#70677 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#70678 = VERTEX_POINT ( 'NONE', #74232 ) ; +#70679 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 49.16666666666667100, -2.545304000185620600 ) ) ; +#70680 = AXIS2_PLACEMENT_3D ( 'NONE', #44832, #13890, #26137 ) ; +#70681 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 17.97246552159110100, -28.38801640354855800 ) ) ; +#70682 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344350900, 31.17701665379241800, -28.20555803802996000 ) ) ; +#70683 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 14.16666666666667700, -3.349151577478988200 ) ) ; +#70684 = FACE_OUTER_BOUND ( 'NONE', #27664, .T. ) ; +#70685 = CARTESIAN_POINT ( 'NONE', ( -18.01482966498185000, 71.60172914845357200, -28.24094723680244800 ) ) ; +#70686 = ORIENTED_EDGE ( 'NONE', *, *, #53813, .F. ) ; +#70687 = EDGE_CURVE ( 'NONE', #65491, #25994, #4566, .T. ) ; +#70688 = ORIENTED_EDGE ( 'NONE', *, *, #58939, .F. ) ; +#70689 = ORIENTED_EDGE ( 'NONE', *, *, #55463, .F. ) ; +#70690 = ORIENTED_EDGE ( 'NONE', *, *, #5443, .T. ) ; +#70691 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 51.50000000000001400, 6.847000845227646500 ) ) ; +#70692 = ORIENTED_EDGE ( 'NONE', *, *, #11546, .T. ) ; +#70693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70694 = CARTESIAN_POINT ( 'NONE', ( 17.06616028005483400, 48.59406971703543100, -28.49013149708292000 ) ) ; +#70695 = CIRCLE ( 'NONE', #73514, 10.50000000000009600 ) ; +#70696 = CONICAL_SURFACE ( 'NONE', #29108, 10.00000000000009600, 0.7853981633974447300 ) ; +#70697 = VERTEX_POINT ( 'NONE', #5949 ) ; +#70698 = ORIENTED_EDGE ( 'NONE', *, *, #74907, .F. ) ; +#70699 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34462, #71730, #53201, #15956 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215299801600E-007, 0.0007606633682806883500 ), + .UNSPECIFIED. ) ; +#70700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70701 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70702 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 90.37705528805042800, -28.20555803803047800 ) ) ; +#70703 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 26.42318720225497900, -28.70555803802994200 ) ) ; +#70704 = CONICAL_SURFACE ( 'NONE', #7005, 10.50000000000009600, 0.7853981633974518300 ) ; +#70705 = EDGE_CURVE ( 'NONE', #32428, #3316, #49960, .T. ) ; +#70706 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629000, 38.92298334620784300, -28.20555803802995200 ) ) ; +#70707 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655344100, 10.17701665379216200, -28.20555803803002000 ) ) ; +#70708 = VERTEX_POINT ( 'NONE', #24705 ) ; +#70709 = CONICAL_SURFACE ( 'NONE', #49035, 10.00000000000009200, 0.7853981633974447300 ) ; +#70710 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484630800, 81.37838321498816200, -28.29547179040443400 ) ) ; +#70711 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70712 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 81.52858243452104100, -28.70555803802997700 ) ) ; +#70713 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 15.60073525436771100, -28.70555803803009500 ) ) ; +#70714 = FACE_OUTER_BOUND ( 'NONE', #16082, .T. ) ; +#70715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70716 = ADVANCED_FACE ( 'NONE', ( #70435 ), #64626, .T. ) ; +#70717 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528132700, 20.46868088498121800, -28.51286550264510200 ) ) ; +#70718 = CARTESIAN_POINT ( 'NONE', ( 12.43124310582091500, 50.54999999999999000, -28.55179745436885200 ) ) ; +#70719 = AXIS2_PLACEMENT_3D ( 'NONE', #67593, #24088, #80107 ) ; +#70720 = EDGE_CURVE ( 'NONE', #19508, #59412, #342, .T. ) ; +#70721 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003900, 71.23796787468685900, -28.38801640354854800 ) ) ; +#70722 = EDGE_LOOP ( 'NONE', ( #25303, #25533, #17199, #31375 ) ) ; +#70723 = ADVANCED_FACE ( 'NONE', ( #68507 ), #14956, .F. ) ; +#70724 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807188400, 84.79999999999986900, -28.70555803803014400 ) ) ; +#70725 = EDGE_CURVE ( 'NONE', #2305, #80208, #31522, .T. ) ; +#70726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70727 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813400, 59.60439022488336000, -28.70555803802997700 ) ) ; +#70728 = AXIS2_PLACEMENT_3D ( 'NONE', #67152, #4856, #66889 ) ; +#70729 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 55.00000000000000700, -9.205558038030005700 ) ) ; +#70730 = CIRCLE ( 'NONE', #58406, 9.500000000000099500 ) ; +#70731 = ORIENTED_EDGE ( 'NONE', *, *, #54336, .T. ) ; +#70732 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#70733 = CIRCLE ( 'NONE', #60295, 9.500000000000099500 ) ; +#70734 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656715200, 20.24660241562189000, -28.20555803802994200 ) ) ; +#70735 = ORIENTED_EDGE ( 'NONE', *, *, #58884, .T. ) ; +#70736 = ORIENTED_EDGE ( 'NONE', *, *, #7913, .T. ) ; +#70737 = FACE_OUTER_BOUND ( 'NONE', #44769, .T. ) ; +#70738 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215565900, 55.79999999999925800, -28.20555803803047800 ) ) ; +#70739 = AXIS2_PLACEMENT_3D ( 'NONE', #75272, #37983, #726 ) ; +#70740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70741 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70742 = AXIS2_PLACEMENT_3D ( 'NONE', #77806, #28074, #34300 ) ; +#70743 = CARTESIAN_POINT ( 'NONE', ( 3.959729345560791400, 18.22438272935914600, -28.30310183417011100 ) ) ; +#70744 = ORIENTED_EDGE ( 'NONE', *, *, #47597, .F. ) ; +#70745 = EDGE_CURVE ( 'NONE', #53788, #68768, #70873, .T. ) ; +#70746 = ADVANCED_FACE ( 'NONE', ( #48014 ), #46069, .T. ) ; +#70747 = EDGE_CURVE ( 'NONE', #30212, #11961, #56406, .T. ) ; +#70748 = AXIS2_PLACEMENT_3D ( 'NONE', #79627, #42332, #5087 ) ; +#70749 = CONICAL_SURFACE ( 'NONE', #52493, 10.00000000000009400, 0.7853981633974447300 ) ; +#70750 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 62.31032580521099400, -28.59353418718932400 ) ) ; +#70751 = CONICAL_SURFACE ( 'NONE', #6333, 10.50000000000009400, 0.7853981633974500600 ) ; +#70752 = ORIENTED_EDGE ( 'NONE', *, *, #75428, .F. ) ; +#70753 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462657100, 61.25732391202388500, -28.20555803803014400 ) ) ; +#70754 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70755 = EDGE_CURVE ( 'NONE', #2565, #79578, #35432, .T. ) ; +#70756 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 20.16666666666668600, 6.794441961969992500 ) ) ; +#70757 = ORIENTED_EDGE ( 'NONE', *, *, #71860, .T. ) ; +#70758 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730099000, 90.01262610361146700, -28.29936525552464500 ) ) ; +#70759 = AXIS2_PLACEMENT_3D ( 'NONE', #1739, #45238, #7993 ) ; +#70760 = AXIS2_PLACEMENT_3D ( 'NONE', #59254, #9464, #21997 ) ; +#70761 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#70762 = CARTESIAN_POINT ( 'NONE', ( -11.11893552610913000, 60.49763722318500200, -28.32100408376068400 ) ) ; +#70763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56056, #74837, #37535, #295 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866776315700E-007, 0.001052545149297102200 ), + .UNSPECIFIED. ) ; +#70764 = CIRCLE ( 'NONE', #8424, 10.00000000000009200 ) ; +#70765 = ORIENTED_EDGE ( 'NONE', *, *, #80655, .F. ) ; +#70766 = ORIENTED_EDGE ( 'NONE', *, *, #50624, .F. ) ; +#70767 = CARTESIAN_POINT ( 'NONE', ( -6.082456188943308600, 14.04999999999997800, -28.70555803802992800 ) ) ; +#70768 = ORIENTED_EDGE ( 'NONE', *, *, #42484, .F. ) ; +#70769 = ORIENTED_EDGE ( 'NONE', *, *, #11407, .F. ) ; +#70770 = ORIENTED_EDGE ( 'NONE', *, *, #69071, .T. ) ; +#70771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70772 = CIRCLE ( 'NONE', #26590, 10.00000000000009400 ) ; +#70773 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#70774 = ORIENTED_EDGE ( 'NONE', *, *, #63587, .T. ) ; +#70775 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32284, #75792, #51005, #13805 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293691500, 0.0007746639185392662200 ), + .UNSPECIFIED. ) ; +#70776 = VERTEX_POINT ( 'NONE', #31505 ) ; +#70777 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#70778 = CARTESIAN_POINT ( 'NONE', ( 4.214258556543608600, 80.07527064970111000, -28.39317435246123400 ) ) ; +#70779 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#70780 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 63.66666666666667900, -5.205558038030003100 ) ) ; +#70781 = TOROIDAL_SURFACE ( 'NONE', #44979, 2.499999999999999600, 5.000000000000000000 ) ; +#70782 = AXIS2_PLACEMENT_3D ( 'NONE', #71727, #40680, #40428 ) ; +#70783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70784 = PLANE ( 'NONE', #34930 ) ; +#70785 = EDGE_LOOP ( 'NONE', ( #2306, #38139, #26221, #47372 ) ) ; +#70786 = VERTEX_POINT ( 'NONE', #37989 ) ; +#70787 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70788 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 80.34267608797603100, -28.20555803802997700 ) ) ; +#70790 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428587200, 61.52858243452104100, -28.70555803802997700 ) ) ; +#70789 = CIRCLE ( 'NONE', #3716, 10.00000000000009200 ) ; +#70791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70792 = AXIS2_PLACEMENT_3D ( 'NONE', #36926, #5947, #74229 ) ; +#70793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #468, #6732, #75017, #13013 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397487400, 0.001517194977238244000 ), + .UNSPECIFIED. ) ; +#70795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70796 = EDGE_LOOP ( 'NONE', ( #45420, #54940, #74262 ) ) ; +#70797 = ADVANCED_FACE ( 'NONE', ( #79208 ), #77238, .T. ) ; +#70798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70799 = EDGE_CURVE ( 'NONE', #67339, #57837, #41952, .T. ) ; +#70800 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#70801 = CARTESIAN_POINT ( 'NONE', ( -21.52908460072864800, 6.735457699635214000, -26.30484836595966800 ) ) ; +#70802 = PLANE ( 'NONE', #55545 ) ; +#70803 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 26.00000000000001100, -1.205558038030002800 ) ) ; +#70804 = CYLINDRICAL_SURFACE ( 'NONE', #79726, 10.00000000000000000 ) ; +#70805 = ORIENTED_EDGE ( 'NONE', *, *, #60865, .T. ) ; +#70806 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70807 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70809 = ORIENTED_EDGE ( 'NONE', *, *, #53789, .F. ) ; +#70810 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925649900, 17.31967837323419000, -28.55467576046951800 ) ) ; +#70811 = ADVANCED_FACE ( 'NONE', ( #62652 ), #44094, .T. ) ; +#70812 = LINE ( 'NONE', #22980, #68871 ) ; +#70813 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70814 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752100, 21.59027028261002800, -28.70555803802994500 ) ) ; +#70815 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344307300, 31.17701665379242100, -28.20555803802996000 ) ) ; +#70816 = CARTESIAN_POINT ( 'NONE', ( 5.501847909391105200, 14.68533208989810400, -28.53910738522671100 ) ) ; +#70817 = ORIENTED_EDGE ( 'NONE', *, *, #64678, .T. ) ; +#70818 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 10.18929190448942600, -28.20555803802994200 ) ) ; +#70819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70820 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70821 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020700, 75.79999999999950000, -28.70555803803047500 ) ) ; +#70822 = CARTESIAN_POINT ( 'NONE', ( 16.52197549498848900, 49.62306210240189600, -28.54786661478399900 ) ) ; +#70823 = FACE_OUTER_BOUND ( 'NONE', #35146, .T. ) ; +#70825 = EDGE_CURVE ( 'NONE', #7612, #46932, #27531, .T. ) ; +#70824 = ORIENTED_EDGE ( 'NONE', *, *, #2197, .F. ) ; +#70826 = CARTESIAN_POINT ( 'NONE', ( 10.03178561562192100, 71.31767869357327100, -28.25052235028445200 ) ) ; +#70827 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#70828 = EDGE_CURVE ( 'NONE', #58782, #31625, #60709, .T. ) ; +#70829 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70830 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70831 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841334100, 80.16349705304836000, -28.30782889147497600 ) ) ; +#70832 = VERTEX_POINT ( 'NONE', #20901 ) ; +#70833 = CARTESIAN_POINT ( 'NONE', ( 10.13214618489073600, 49.97143078992714700, -28.37063977681168200 ) ) ; +#70834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70836 = EDGE_CURVE ( 'NONE', #54838, #13600, #13064, .T. ) ; +#70837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70838 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52820, #9294, #59088, #21836 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951606096500E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#70839 = ADVANCED_FACE ( 'NONE', ( #2283 ), #75294, .T. ) ; +#70840 = CONICAL_SURFACE ( 'NONE', #13442, 10.50000000000009600, 0.7853981633974482800 ) ; +#70841 = EDGE_CURVE ( 'NONE', #7846, #80233, #11073, .T. ) ; +#70842 = CIRCLE ( 'NONE', #43804, 9.500000000000097700 ) ; +#70843 = EDGE_LOOP ( 'NONE', ( #2215, #7977, #35674, #8954 ) ) ; +#70844 = AXIS2_PLACEMENT_3D ( 'NONE', #71658, #34387, #77909 ) ; +#70845 = VERTEX_POINT ( 'NONE', #64702 ) ; +#70846 = ORIENTED_EDGE ( 'NONE', *, *, #64074, .T. ) ; +#70847 = ORIENTED_EDGE ( 'NONE', *, *, #59793, .F. ) ; +#70848 = EDGE_LOOP ( 'NONE', ( #12407, #27332, #67482, #45784 ) ) ; +#70849 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000045300, 18.16749699759753200, -28.20555803803025800 ) ) ; +#70850 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 69.66666666666668600, -8.133761268305512700 ) ) ; +#70851 = EDGE_LOOP ( 'NONE', ( #18339, #28661, #36788 ) ) ; +#70852 = AXIS2_PLACEMENT_3D ( 'NONE', #541, #31858, #38069 ) ; +#70853 = EDGE_CURVE ( 'NONE', #46843, #70161, #29594, .T. ) ; +#70854 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70855 = EDGE_CURVE ( 'NONE', #62197, #40334, #79373, .T. ) ; +#70856 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174761000, 51.43945992495534400, -28.34042301926881900 ) ) ; +#70857 = EDGE_CURVE ( 'NONE', #31022, #60512, #51905, .T. ) ; +#70858 = AXIS2_PLACEMENT_3D ( 'NONE', #69709, #75686, #75962 ) ; +#70859 = ORIENTED_EDGE ( 'NONE', *, *, #5552, .F. ) ; +#70860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70861 = CONICAL_SURFACE ( 'NONE', #19377, 10.50000000000009400, 0.7853981633974500600 ) ; +#70862 = ORIENTED_EDGE ( 'NONE', *, *, #72554, .F. ) ; +#70863 = ORIENTED_EDGE ( 'NONE', *, *, #62994, .T. ) ; +#70864 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828106800, 60.46231468379674100, -28.37082013777819300 ) ) ; +#70865 = PLANE ( 'NONE', #73392 ) ; +#70866 = ORIENTED_EDGE ( 'NONE', *, *, #14136, .F. ) ; +#70867 = AXIS2_PLACEMENT_3D ( 'NONE', #55017, #61314, #11530 ) ; +#70868 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 70.37705528805044300, -28.20555803803047800 ) ) ; +#70869 = FACE_OUTER_BOUND ( 'NONE', #18785, .T. ) ; +#70870 = EDGE_CURVE ( 'NONE', #65996, #27733, #64927, .T. ) ; +#70871 = AXIS2_PLACEMENT_3D ( 'NONE', #18520, #62052, #24775 ) ; +#70872 = ORIENTED_EDGE ( 'NONE', *, *, #2312, .F. ) ; +#70873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6462, #74746, #62496, #25245 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066681692467717800E-007, 0.0004318395898544924500 ), + .UNSPECIFIED. ) ; +#70874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70876 = VERTEX_POINT ( 'NONE', #21446 ) ; +#70875 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999954900, 81.43250300240198700, -28.20555803803047800 ) ) ; +#70877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70879 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70881 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 41.00000000000000700, 9.794441961969996100 ) ) ; +#70882 = CARTESIAN_POINT ( 'NONE', ( 4.446507817027361800, 59.37488905616132900, -28.55192314908443800 ) ) ; +#70883 = CARTESIAN_POINT ( 'NONE', ( -3.073496928715834900, 61.37839075872581400, -28.29547734244353000 ) ) ; +#70884 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#70885 = CONICAL_SURFACE ( 'NONE', #59358, 10.00000000000009600, 0.7853981633974482800 ) ; +#70886 = ORIENTED_EDGE ( 'NONE', *, *, #12715, .F. ) ; +#70887 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51397, #20718, #70465, #33212 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641858823228600E-007, 0.0008759659331882821100 ), + .UNSPECIFIED. ) ; +#70888 = CARTESIAN_POINT ( 'NONE', ( 15.51770601915501400, 8.964587961689977300, -28.65180968932673600 ) ) ; +#70889 = ORIENTED_EDGE ( 'NONE', *, *, #4223, .T. ) ; +#70890 = CARTESIAN_POINT ( 'NONE', ( 11.90673326026315400, 14.04999999999926700, -28.70555803803042500 ) ) ; +#70891 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70892 = CARTESIAN_POINT ( 'NONE', ( 17.06616028005485900, 27.59406971703542400, -28.49013149708291700 ) ) ; +#70893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70894 = ADVANCED_FACE ( 'NONE', ( #27626 ), #25673, .T. ) ; +#70895 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609813600, 61.46283204837369900, -28.48697406221627300 ) ) ; +#70896 = CARTESIAN_POINT ( 'NONE', ( -12.50184790939080600, 34.41466791010193300, -28.53910738522643700 ) ) ; +#70897 = CARTESIAN_POINT ( 'NONE', ( -12.29416214178218600, 45.54999999999999700, -28.37136602294610600 ) ) ; +#70898 = AXIS2_PLACEMENT_3D ( 'NONE', #26602, #32820, #63860 ) ; +#70899 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957521400, 42.59027028261002800, -28.70555803802996700 ) ) ; +#70900 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853715200, 80.34267608797551900, -28.20555803803014400 ) ) ; +#70901 = FACE_OUTER_BOUND ( 'NONE', #50372, .T. ) ; +#70902 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 3.333333333333341000, -8.133761268305512700 ) ) ; +#70903 = CARTESIAN_POINT ( 'NONE', ( 17.08198180548965800, 28.65930907398619700, -28.35186440610856500 ) ) ; +#70904 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70905 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 57.94142842854304100, -28.20555803802997700 ) ) ; +#70906 = ORIENTED_EDGE ( 'NONE', *, *, #60023, .T. ) ; +#70907 = ORIENTED_EDGE ( 'NONE', *, *, #73829, .T. ) ; +#70908 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#70909 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654447300, 61.32559822014156500, -28.29986836858031700 ) ) ; +#70910 = ADVANCED_FACE ( 'NONE', ( #58739 ), #3174, .T. ) ; +#70911 = AXIS2_PLACEMENT_3D ( 'NONE', #5579, #49058, #11844 ) ; +#70912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70913 = EDGE_CURVE ( 'NONE', #35524, #46519, #16920, .T. ) ; +#70914 = VECTOR ( 'NONE', #51561, 1000.000000000000000 ) ; +#70915 = ORIENTED_EDGE ( 'NONE', *, *, #9251, .T. ) ; +#70916 = CIRCLE ( 'NONE', #69328, 10.00000000000009200 ) ; +#70917 = ORIENTED_EDGE ( 'NONE', *, *, #59904, .F. ) ; +#70918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70919 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70920 = VERTEX_POINT ( 'NONE', #9436 ) ; +#70921 = ORIENTED_EDGE ( 'NONE', *, *, #7331, .F. ) ; +#70922 = ADVANCED_FACE ( 'NONE', ( #42163 ), #7132, .T. ) ; +#70923 = CIRCLE ( 'NONE', #53824, 10.00000000000009200 ) ; +#70924 = ORIENTED_EDGE ( 'NONE', *, *, #52436, .T. ) ; +#70925 = CARTESIAN_POINT ( 'NONE', ( 6.372357437743846500E-015, 47.89962244433173300, -28.53664883431609300 ) ) ; +#70926 = ORIENTED_EDGE ( 'NONE', *, *, #27580, .F. ) ; +#70927 = VERTEX_POINT ( 'NONE', #46947 ) ; +#70928 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 71.82440674572814000, -28.45987523529581900 ) ) ; +#70929 = ORIENTED_EDGE ( 'NONE', *, *, #37933, .F. ) ; +#70930 = VERTEX_POINT ( 'NONE', #53227 ) ; +#70931 = CARTESIAN_POINT ( 'NONE', ( -9.794151403462477000, 81.39409401757625100, -28.39369363572359700 ) ) ; +#70932 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609180800, 51.46283204837325800, -28.48697406221693400 ) ) ; +#70933 = ORIENTED_EDGE ( 'NONE', *, *, #3549, .F. ) ; +#70934 = CARTESIAN_POINT ( 'NONE', ( -16.73584074218855400, 50.17436051799357700, -28.45080305021061000 ) ) ; +#70935 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046000, 80.16749699759753900, -28.20555803803030800 ) ) ; +#70936 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44245, #50505, #25818, #69309 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.075677338840736500E-017, 0.001492013864175160200 ), + .UNSPECIFIED. ) ; +#70937 = ADVANCED_FACE ( 'NONE', ( #9069 ), #54830, .T. ) ; +#70938 = CONICAL_SURFACE ( 'NONE', #71443, 10.00000000000009600, 0.7853981633974447300 ) ; +#70939 = EDGE_CURVE ( 'NONE', #11933, #5676, #71388, .T. ) ; +#70940 = VERTEX_POINT ( 'NONE', #65768 ) ; +#70941 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274702300, 45.23212903577624600, -28.37244029424743600 ) ) ; +#70942 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472529600, 45.54999999999999700, -28.20555803802996700 ) ) ; +#70943 = ORIENTED_EDGE ( 'NONE', *, *, #64491, .F. ) ; +#70944 = ORIENTED_EDGE ( 'NONE', *, *, #73718, .F. ) ; +#70945 = EDGE_CURVE ( 'NONE', #62355, #66057, #56789, .T. ) ; +#70946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70947 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 90.16749699759768100, -28.20555803802997700 ) ) ; +#70948 = FACE_OUTER_BOUND ( 'NONE', #54455, .T. ) ; +#70949 = ADVANCED_FACE ( 'NONE', ( #13029 ), #72025, .T. ) ; +#70950 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 47.00000000000001400, -1.205558038030002800 ) ) ; +#70951 = EDGE_LOOP ( 'NONE', ( #67530, #55387, #44681 ) ) ; +#70952 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#70953 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 70.34267608797603100, -28.20555803802997700 ) ) ; +#70954 = EDGE_CURVE ( 'NONE', #7922, #5650, #50382, .T. ) ; +#70955 = ORIENTED_EDGE ( 'NONE', *, *, #41789, .T. ) ; +#70956 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 12.00000000000001100, -1.205558038030005300 ) ) ; +#70957 = EDGE_CURVE ( 'NONE', #24293, #59244, #35990, .T. ) ; +#70958 = AXIS2_PLACEMENT_3D ( 'NONE', #54048, #16813, #60344 ) ; +#70959 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#70960 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194903400, 54.83849307182673300, -28.68631150211663800 ) ) ; +#70961 = EDGE_CURVE ( 'NONE', #43457, #43891, #21532, .T. ) ; +#70962 = CONICAL_SURFACE ( 'NONE', #76493, 10.00000000000009200, 0.7853981633974415100 ) ; +#70963 = VERTEX_POINT ( 'NONE', #22769 ) ; +#70964 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#70965 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122158800, 30.52667319908792400, -28.37233769390154600 ) ) ; +#70966 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 49.33333333333335700, -6.705558038030005700 ) ) ; +#70967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70968 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76534, #45234, #45493, #39269 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002680960718950752400, 0.0006654852833079124500 ), + .UNSPECIFIED. ) ; +#70969 = EDGE_LOOP ( 'NONE', ( #48127, #50852, #34294, #55046 ) ) ; +#70970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70971 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16016, #72059, #10025, #53539 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003116639662535545500, 0.0009765394310393613300 ), + .UNSPECIFIED. ) ; +#70972 = AXIS2_PLACEMENT_3D ( 'NONE', #76192, #70471, #57971 ) ; +#70973 = EDGE_CURVE ( 'NONE', #46711, #73055, #7038, .T. ) ; +#70974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70975 = EDGE_CURVE ( 'NONE', #39642, #60356, #38259, .T. ) ; +#70976 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#70977 = EDGE_CURVE ( 'NONE', #60356, #39773, #73353, .T. ) ; +#70978 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70979 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045800, 90.36203212531218300, -28.38801640354843400 ) ) ; +#70980 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#70981 = AXIS2_PLACEMENT_3D ( 'NONE', #65521, #15724, #34498 ) ; +#70982 = CONICAL_SURFACE ( 'NONE', #66598, 10.00000000000009600, 0.7853981633974482800 ) ; +#70983 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#70984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70985 = CYLINDRICAL_SURFACE ( 'NONE', #69220, 10.00000000000000000 ) ; +#70986 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37448, #74754, #6472, #49949 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697630884800E-007, 0.0008724363063899925700 ), + .UNSPECIFIED. ) ; +#70987 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467678100, 19.76893971292313200, -28.57333386111099900 ) ) ; +#70988 = ORIENTED_EDGE ( 'NONE', *, *, #72196, .F. ) ; +#70989 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70990 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#70991 = EDGE_CURVE ( 'NONE', #7602, #3947, #73389, .T. ) ; +#70992 = AXIS2_PLACEMENT_3D ( 'NONE', #7064, #50565, #13370 ) ; +#70993 = CARTESIAN_POINT ( 'NONE', ( 4.957239735864592800, 75.79999999999967000, -28.53819074160713900 ) ) ; +#70994 = AXIS2_PLACEMENT_3D ( 'NONE', #70032, #57801, #64081 ) ; +#70995 = ORIENTED_EDGE ( 'NONE', *, *, #32717, .T. ) ; +#70996 = FACE_OUTER_BOUND ( 'NONE', #73949, .T. ) ; +#70997 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.68929190448941200, -28.20555803802995200 ) ) ; +#70998 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .T. ) ; +#70999 = CIRCLE ( 'NONE', #74009, 10.00000000000009400 ) ; +#71000 = VERTEX_POINT ( 'NONE', #79338 ) ; +#71001 = ORIENTED_EDGE ( 'NONE', *, *, #16, .T. ) ; +#71002 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 52.83333333333334300, 6.794441961969992500 ) ) ; +#71003 = FACE_OUTER_BOUND ( 'NONE', #62519, .T. ) ; +#71004 = ORIENTED_EDGE ( 'NONE', *, *, #763, .F. ) ; +#71006 = VERTEX_POINT ( 'NONE', #66831 ) ; +#71005 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#71007 = ORIENTED_EDGE ( 'NONE', *, *, #7027, .T. ) ; +#71008 = ORIENTED_EDGE ( 'NONE', *, *, #73391, .T. ) ; +#71009 = ORIENTED_EDGE ( 'NONE', *, *, #12099, .F. ) ; +#71010 = CARTESIAN_POINT ( 'NONE', ( 8.695197551977138100, 8.955760754971610300, -28.65273796500219200 ) ) ; +#71011 = ADVANCED_FACE ( 'NONE', ( #40230 ), #19807, .F. ) ; +#71012 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71013 = CARTESIAN_POINT ( 'NONE', ( -6.079006772786334200, 44.44999999999998900, 3.994987765673467400 ) ) ; +#71014 = AXIS2_PLACEMENT_3D ( 'NONE', #25896, #13394, #69384 ) ; +#71016 = ORIENTED_EDGE ( 'NONE', *, *, #15749, .T. ) ; +#71015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71017 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71018 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58730, #15224, #71248, #33985 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859814546330600E-007, 0.0007763385940577260900 ), + .UNSPECIFIED. ) ; +#71019 = AXIS2_PLACEMENT_3D ( 'NONE', #31502, #62492, #68748 ) ; +#71020 = ORIENTED_EDGE ( 'NONE', *, *, #49385, .F. ) ; +#71021 = FACE_OUTER_BOUND ( 'NONE', #50578, .T. ) ; +#71022 = ORIENTED_EDGE ( 'NONE', *, *, #45543, .F. ) ; +#71023 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.16666666666668600, -3.349151577478988200 ) ) ; +#71024 = ORIENTED_EDGE ( 'NONE', *, *, #80132, .T. ) ; +#71025 = ADVANCED_FACE ( 'NONE', ( #21763 ), #23721, .T. ) ; +#71026 = EDGE_CURVE ( 'NONE', #15998, #59962, #58897, .T. ) ; +#71027 = ORIENTED_EDGE ( 'NONE', *, *, #14723, .F. ) ; +#71028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71029 = VERTEX_POINT ( 'NONE', #5058 ) ; +#71030 = ORIENTED_EDGE ( 'NONE', *, *, #6280, .F. ) ; +#71031 = AXIS2_PLACEMENT_3D ( 'NONE', #46256, #9001, #52525 ) ; +#71032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71033 = ADVANCED_FACE ( 'NONE', ( #5198 ), #34403, .T. ) ; +#71034 = CIRCLE ( 'NONE', #51430, 9.500000000000095900 ) ; +#71035 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 18.00000000000001400, -9.205558038030005700 ) ) ; +#71036 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346247200, 90.20590598242371500, -28.39369363572360100 ) ) ; +#71037 = AXIS2_PLACEMENT_3D ( 'NONE', #5435, #11706, #42671 ) ; +#71038 = ORIENTED_EDGE ( 'NONE', *, *, #64916, .F. ) ; +#71039 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71040 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 20.43250300240229200, -28.20555803802995200 ) ) ; +#71041 = VERTEX_POINT ( 'NONE', #17601 ) ; +#71042 = ADVANCED_FACE ( 'NONE', ( #69423 ), #1284, .F. ) ; +#71043 = AXIS2_PLACEMENT_3D ( 'NONE', #74155, #36846, #80394 ) ; +#71044 = CIRCLE ( 'NONE', #25423, 10.00000000000009600 ) ; +#71046 = ORIENTED_EDGE ( 'NONE', *, *, #64559, .F. ) ; +#71045 = CARTESIAN_POINT ( 'NONE', ( 1.314034490221693400, 14.04999999999998100, -28.37321477197627600 ) ) ; +#71047 = ORIENTED_EDGE ( 'NONE', *, *, #56533, .T. ) ; +#71048 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71049 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#71050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71051 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 61.49999999999999300, 4.650848422521012700 ) ) ; +#71052 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995000, 31.46823913367205300, -28.70555803802996700 ) ) ; +#71053 = CARTESIAN_POINT ( 'NONE', ( -16.96406991950722800, 7.195245837392696400, -28.29282665463146900 ) ) ; +#71054 = EDGE_CURVE ( 'NONE', #7631, #79993, #44389, .T. ) ; +#71055 = FACE_OUTER_BOUND ( 'NONE', #74799, .T. ) ; +#71056 = CARTESIAN_POINT ( 'NONE', ( -3.400687021722873300, 92.17541673345664300, -28.69290071860184500 ) ) ; +#71057 = EDGE_CURVE ( 'NONE', #49270, #2762, #17862, .T. ) ; +#71058 = ORIENTED_EDGE ( 'NONE', *, *, #51652, .F. ) ; +#71059 = VERTEX_POINT ( 'NONE', #55100 ) ; +#71060 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2208, #8458, #14746, #58255 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019575022150500E-007, 0.0004053774948085199000 ), + .UNSPECIFIED. ) ; +#71061 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71062 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71063 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890825500, 70.49763722318472500, -28.32100408376071600 ) ) ; +#71064 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#71065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71066 = EDGE_CURVE ( 'NONE', #65478, #61214, #36339, .T. ) ; +#71067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71068 = CARTESIAN_POINT ( 'NONE', ( -2.997971278275734600, 41.31091476818473800, -28.25432823872347000 ) ) ; +#71069 = FACE_OUTER_BOUND ( 'NONE', #59231, .T. ) ; +#71070 = ORIENTED_EDGE ( 'NONE', *, *, #11896, .F. ) ; +#71071 = CARTESIAN_POINT ( 'NONE', ( -16.63972831208344500, 8.360271687915785700, -28.62410630021335200 ) ) ; +#71072 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567153600, 20.24660241562189400, -28.20555803802994200 ) ) ; +#71073 = ORIENTED_EDGE ( 'NONE', *, *, #50086, .F. ) ; +#71074 = EDGE_CURVE ( 'NONE', #47896, #59347, #52878, .T. ) ; +#71075 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 23.83333333333333900, -2.545304000185615800 ) ) ; +#71076 = EDGE_CURVE ( 'NONE', #32364, #24420, #3231, .T. ) ; +#71077 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71078 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 87.22261628933270600, -28.70555803802997700 ) ) ; +#71079 = FACE_OUTER_BOUND ( 'NONE', #31006, .T. ) ; +#71080 = CARTESIAN_POINT ( 'NONE', ( -3.160449548280911200, 81.13768531620318900, -28.37082013777821700 ) ) ; +#71081 = ORIENTED_EDGE ( 'NONE', *, *, #51613, .F. ) ; +#71082 = ORIENTED_EDGE ( 'NONE', *, *, #56305, .T. ) ; +#71083 = EDGE_LOOP ( 'NONE', ( #2634, #57003, #72143, #34316 ) ) ; +#71084 = ORIENTED_EDGE ( 'NONE', *, *, #6858, .F. ) ; +#71085 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 74.79999999999975600, -28.70555803803030800 ) ) ; +#71086 = ORIENTED_EDGE ( 'NONE', *, *, #72045, .T. ) ; +#71087 = ORIENTED_EDGE ( 'NONE', *, *, #30822, .T. ) ; +#71088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71089 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71090 = CARTESIAN_POINT ( 'NONE', ( -11.31977005189933100, 20.97636006919910300, -28.38670679782166700 ) ) ; +#71091 = AXIS2_PLACEMENT_3D ( 'NONE', #73963, #36395, #42923 ) ; +#71092 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#71093 = EDGE_CURVE ( 'NONE', #23867, #42192, #30032, .T. ) ; +#71094 = EDGE_CURVE ( 'NONE', #45307, #44558, #15541, .T. ) ; +#71095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71096 = EDGE_CURVE ( 'NONE', #80412, #22950, #1044, .T. ) ; +#71097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71098 = PLANE ( 'NONE', #6767 ) ; +#71099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71100 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71101 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71102 = CIRCLE ( 'NONE', #37457, 10.00000000000009400 ) ; +#71103 = AXIS2_PLACEMENT_3D ( 'NONE', #62216, #24944, #68461 ) ; +#71104 = ORIENTED_EDGE ( 'NONE', *, *, #30729, .F. ) ; +#71105 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71106 = VERTEX_POINT ( 'NONE', #24641 ) ; +#71107 = ORIENTED_EDGE ( 'NONE', *, *, #57300, .F. ) ; +#71108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71109 = VERTEX_POINT ( 'NONE', #6137 ) ; +#71110 = ORIENTED_EDGE ( 'NONE', *, *, #64239, .F. ) ; +#71111 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#71112 = CIRCLE ( 'NONE', #36812, 10.50000000000009800 ) ; +#71113 = AXIS2_PLACEMENT_3D ( 'NONE', #61690, #43155, #5912 ) ; +#71114 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627435500, 63.66464174796072900, -28.53896444442202500 ) ) ; +#71115 = AXIS2_PLACEMENT_3D ( 'NONE', #39198, #1943, #45428 ) ; +#71116 = CARTESIAN_POINT ( 'NONE', ( 3.207944239504924700, 10.40771342879317100, -28.53891855579978900 ) ) ; +#71117 = ORIENTED_EDGE ( 'NONE', *, *, #19847, .T. ) ; +#71118 = AXIS2_PLACEMENT_3D ( 'NONE', #71941, #34679, #78184 ) ; +#71119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51403, #7912, #14196, #57704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859795293200E-007, 0.0008759659331884736900 ), + .UNSPECIFIED. ) ; +#71121 = ORIENTED_EDGE ( 'NONE', *, *, #5484, .F. ) ; +#71122 = CONICAL_SURFACE ( 'NONE', #56612, 10.00000000000009400, 0.7853981633974447300 ) ; +#71123 = ORIENTED_EDGE ( 'NONE', *, *, #34360, .T. ) ; +#71124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29540, #54239, #16994, #73035 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972908994056700E-007, 0.0005865296644893884500 ), + .UNSPECIFIED. ) ; +#71125 = ORIENTED_EDGE ( 'NONE', *, *, #11878, .T. ) ; +#71126 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719559300, 83.65857157145691800, -28.37229765499328200 ) ) ; +#71127 = ADVANCED_FACE ( 'NONE', ( #67480 ), #63605, .F. ) ; +#71128 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 67.50000000000002800, 4.650848422521016300 ) ) ; +#71129 = AXIS2_PLACEMENT_3D ( 'NONE', #30968, #74490, #37183 ) ; +#71130 = EDGE_CURVE ( 'NONE', #40000, #8206, #80131, .T. ) ; +#71131 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 80.37705528805041400, -28.20555803803047800 ) ) ; +#71132 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008000, 26.44142842854304100, -28.20555803802994200 ) ) ; +#71133 = PLANE ( 'NONE', #57049 ) ; +#71134 = ADVANCED_FACE ( 'NONE', ( #48949 ), #47002, .T. ) ; +#71135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44417, #939, #50698, #13491 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002587550632192906900, 0.0009605145132133645900 ), + .UNSPECIFIED. ) ; +#71136 = EDGE_CURVE ( 'NONE', #29208, #30281, #65568, .T. ) ; +#71137 = ORIENTED_EDGE ( 'NONE', *, *, #26464, .T. ) ; +#71138 = ORIENTED_EDGE ( 'NONE', *, *, #20947, .T. ) ; +#71139 = AXIS2_PLACEMENT_3D ( 'NONE', #30377, #73888, #36588 ) ; +#71140 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298124000, 75.79999999999999700, -28.70555803802997700 ) ) ; +#71141 = ORIENTED_EDGE ( 'NONE', *, *, #72699, .F. ) ; +#71142 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#71143 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 36.22261628933270600, -28.70555803802995200 ) ) ; +#71144 = ADVANCED_FACE ( 'NONE', ( #32437 ), #45029, .F. ) ; +#71145 = CARTESIAN_POINT ( 'NONE', ( -1.899882735204354600, 14.04999999999975900, -28.53808257741947000 ) ) ; +#71146 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804072300, 33.15857157145700300, -28.37229765499281000 ) ) ; +#71147 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 38.83333333333335000, -12.20555803803000600 ) ) ; +#71148 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 43.43454006867177200, -28.70555803802999500 ) ) ; +#71149 = CONICAL_SURFACE ( 'NONE', #66935, 10.00000000000009400, 0.7853981633974447300 ) ; +#71150 = ORIENTED_EDGE ( 'NONE', *, *, #21984, .F. ) ; +#71151 = AXIS2_PLACEMENT_3D ( 'NONE', #54273, #41756, #72794 ) ; +#71152 = ORIENTED_EDGE ( 'NONE', *, *, #15384, .T. ) ; +#71153 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 85.79999999999984100, -28.20555803803014400 ) ) ; +#71154 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865853100, 28.91272737910569300, -28.28853693900641300 ) ) ; +#71155 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495012300, 20.90771342879323300, -28.53891855579987800 ) ) ; +#71156 = ORIENTED_EDGE ( 'NONE', *, *, #50911, .T. ) ; +#71157 = FACE_OUTER_BOUND ( 'NONE', #17870, .T. ) ; +#71158 = ORIENTED_EDGE ( 'NONE', *, *, #24281, .F. ) ; +#71159 = ORIENTED_EDGE ( 'NONE', *, *, #51538, .F. ) ; +#71160 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66509, #60265, #41726, #4472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465980609200E-007, 0.0004435563144346427200 ), + .UNSPECIFIED. ) ; +#71162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71163 = EDGE_LOOP ( 'NONE', ( #14545, #75393, #31856, #77421, #55690 ) ) ; +#71164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71166 = EDGE_LOOP ( 'NONE', ( #63785, #35394, #35331, #38396, #5446, #57924 ) ) ; +#71167 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71168 = AXIS2_PLACEMENT_3D ( 'NONE', #68464, #18693, #74721 ) ; +#71169 = CONICAL_SURFACE ( 'NONE', #12999, 10.50000000000009800, 0.7853981633974500600 ) ; +#71170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38958, #13982, #63766, #1704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401338000, 0.004682530427069466400 ), + .UNSPECIFIED. ) ; +#71171 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 71.65075715145309200, -28.20555803802998100 ) ) ; +#71172 = CARTESIAN_POINT ( 'NONE', ( 5.294162141782187800, 35.05000000000000400, -28.37136602294609500 ) ) ; +#71173 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#71174 = ORIENTED_EDGE ( 'NONE', *, *, #80489, .T. ) ; +#71175 = FACE_OUTER_BOUND ( 'NONE', #22010, .T. ) ; +#71176 = EDGE_CURVE ( 'NONE', #44515, #75712, #78192, .T. ) ; +#71177 = ORIENTED_EDGE ( 'NONE', *, *, #49861, .T. ) ; +#71178 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 1.166666666666679800, 6.794441961969992500 ) ) ; +#71179 = EDGE_LOOP ( 'NONE', ( #52582, #53209, #72527 ) ) ; +#71180 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 49.42298334620782900, -28.20555803802996700 ) ) ; +#71181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71182 = ORIENTED_EDGE ( 'NONE', *, *, #52335, .T. ) ; +#71183 = ORIENTED_EDGE ( 'NONE', *, *, #17228, .T. ) ; +#71184 = ORIENTED_EDGE ( 'NONE', *, *, #6738, .F. ) ; +#71185 = ORIENTED_EDGE ( 'NONE', *, *, #22108, .F. ) ; +#71186 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 79.94924284854739900, -28.20555803802997700 ) ) ; +#71187 = CONICAL_SURFACE ( 'NONE', #49778, 10.00000000000009200, 0.7853981633974447300 ) ; +#71188 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339058100, 60.13716795162658700, -28.48697406221668200 ) ) ; +#71189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71190 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#71191 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71192 = ORIENTED_EDGE ( 'NONE', *, *, #60871, .T. ) ; +#71193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71194 = EDGE_CURVE ( 'NONE', #61214, #32213, #15897, .T. ) ; +#71195 = EDGE_CURVE ( 'NONE', #12914, #76219, #67385, .T. ) ; +#71196 = CYLINDRICAL_SURFACE ( 'NONE', #57107, 10.00000000000000200 ) ; +#71197 = VERTEX_POINT ( 'NONE', #401 ) ; +#71198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71199 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769025300, 19.81139552890386900, -28.53900456328625200 ) ) ; +#71200 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#71201 = AXIS2_PLACEMENT_3D ( 'NONE', #2699, #46206, #8950 ) ; +#71202 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#71203 = EDGE_CURVE ( 'NONE', #45576, #11805, #52900, .T. ) ; +#71204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71205 = EDGE_CURVE ( 'NONE', #75458, #54001, #38418, .T. ) ; +#71206 = CARTESIAN_POINT ( 'NONE', ( -10.36049707220279700, 20.43250300240229600, -28.25438406275897000 ) ) ; +#71207 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217498700, 80.16054007504433800, -28.34042301926905700 ) ) ; +#71208 = ADVANCED_FACE ( 'NONE', ( #50892 ), #59701, .F. ) ; +#71209 = EDGE_CURVE ( 'NONE', #61739, #78930, #76215, .T. ) ; +#71210 = AXIS2_PLACEMENT_3D ( 'NONE', #76516, #39250, #1988 ) ; +#71211 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71212 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71213 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71214 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 10.49999999999999800, -9.258116921287651700 ) ) ; +#71215 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25986, #32215, #26257, #69736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572033233300E-007, 0.0007596410370205246900 ), + .UNSPECIFIED. ) ; +#71216 = VERTEX_POINT ( 'NONE', #13493 ) ; +#71217 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431100, 20.67701665379226500, -28.20555803802994200 ) ) ; +#71218 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#71219 = VERTEX_POINT ( 'NONE', #69482 ) ; +#71220 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4370, #41624, #23153, #66670 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001033575782259647400, 0.0004330091189932694900 ), + .UNSPECIFIED. ) ; +#71221 = ADVANCED_FACE ( 'NONE', ( #13954 ), #942, .T. ) ; +#71222 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 44.83333333333333600, 0.1341879241256075400 ) ) ; +#71223 = AXIS2_PLACEMENT_3D ( 'NONE', #23457, #66977, #29743 ) ; +#71224 = AXIS2_PLACEMENT_3D ( 'NONE', #7193, #50717, #13501 ) ; +#71225 = CARTESIAN_POINT ( 'NONE', ( -15.98442875286463000, 88.93300507136145000, -28.67024809316607700 ) ) ; +#71226 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#71227 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#71228 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 9.833333333333357000, 0.9380355014189731800 ) ) ; +#71229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56607, #25639, #50590, #13393 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569825297900E-007, 0.0004669842289003206100 ), + .UNSPECIFIED. ) ; +#71230 = FACE_OUTER_BOUND ( 'NONE', #59690, .T. ) ; +#71231 = ORIENTED_EDGE ( 'NONE', *, *, #64220, .F. ) ; +#71232 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660958900, 81.46283204837338600, -28.48697406221667400 ) ) ; +#71233 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71234 = ORIENTED_EDGE ( 'NONE', *, *, #25956, .F. ) ; +#71235 = CARTESIAN_POINT ( 'NONE', ( 3.221259145455635900, 39.16476764525110400, -28.30311733712048300 ) ) ; +#71236 = CIRCLE ( 'NONE', #12510, 10.00000000000009600 ) ; +#71237 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 47.16666666666667900, 1.741883078712356500 ) ) ; +#71238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#71239 = ORIENTED_EDGE ( 'NONE', *, *, #72770, .F. ) ; +#71240 = VERTEX_POINT ( 'NONE', #50958 ) ; +#71241 = ORIENTED_EDGE ( 'NONE', *, *, #11629, .T. ) ; +#71242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71243 = ORIENTED_EDGE ( 'NONE', *, *, #13800, .T. ) ; +#71244 = AXIS2_PLACEMENT_3D ( 'NONE', #17152, #60683, #23404 ) ; +#71245 = EDGE_CURVE ( 'NONE', #10633, #45860, #24020, .T. ) ; +#71246 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70318, #45528, #64385, #27099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081983757700E-007, 0.001119323292485640900 ), + .UNSPECIFIED. ) ; +#71247 = FACE_OUTER_BOUND ( 'NONE', #72641, .T. ) ; +#71248 = CARTESIAN_POINT ( 'NONE', ( 15.31403449022162600, 14.05000000000005400, -28.37321477197637200 ) ) ; +#71249 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 70.79999999999998300, -28.45034744217088700 ) ) ; +#71250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71251 = ADVANCED_FACE ( 'NONE', ( #61661 ), #74297, .T. ) ; +#71252 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654430700, 51.52472935029880600, -28.39317435246158500 ) ) ; +#71253 = ORIENTED_EDGE ( 'NONE', *, *, #75154, .F. ) ; +#71254 = ORIENTED_EDGE ( 'NONE', *, *, #78228, .T. ) ; +#71255 = FACE_OUTER_BOUND ( 'NONE', #20440, .T. ) ; +#71256 = ORIENTED_EDGE ( 'NONE', *, *, #46020, .T. ) ; +#71257 = CARTESIAN_POINT ( 'NONE', ( -13.52370513372566000, 43.66464174796073600, -28.53896444442201000 ) ) ; +#71258 = EDGE_CURVE ( 'NONE', #56101, #72435, #9532, .T. ) ; +#71259 = ORIENTED_EDGE ( 'NONE', *, *, #43583, .T. ) ; +#71260 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#71261 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714268700, 12.17681279774500200, -28.70555803802994200 ) ) ; +#71262 = ORIENTED_EDGE ( 'NONE', *, *, #7813, .T. ) ; +#71263 = AXIS2_PLACEMENT_3D ( 'NONE', #16535, #60073, #22789 ) ; +#71264 = ORIENTED_EDGE ( 'NONE', *, *, #79788, .T. ) ; +#71265 = EDGE_LOOP ( 'NONE', ( #75969, #72835, #33440, #74743 ) ) ; +#71266 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091595000, 37.52574874835211500, -28.70555803803001300 ) ) ; +#71267 = CONICAL_SURFACE ( 'NONE', #13768, 10.00000000000009400, 0.7853981633974447300 ) ; +#71268 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034405500, 38.92298334620738800, -28.20555803802996000 ) ) ; +#71269 = ORIENTED_EDGE ( 'NONE', *, *, #79808, .T. ) ; +#71270 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#71271 = CARTESIAN_POINT ( 'NONE', ( -9.997971278275732800, 41.31091476818473800, -28.25432823872347000 ) ) ; +#71272 = CONICAL_SURFACE ( 'NONE', #33611, 10.50000000000009200, 0.7853981633974482800 ) ; +#71273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71274 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655948500, 49.42298334620738800, -28.20555803802997400 ) ) ; +#71275 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21180, #52397, #15169, #58681 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633004721052600E-007, 0.0004089065559708727000 ), + .UNSPECIFIED. ) ; +#71276 = VERTEX_POINT ( 'NONE', #32494 ) ; +#71277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71278 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.79999999999999700, -28.20555803802997700 ) ) ; +#71279 = AXIS2_PLACEMENT_3D ( 'NONE', #36215, #79730, #42443 ) ; +#71280 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 50.66666666666667900, -8.133761268305512700 ) ) ; +#71281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71282 = CIRCLE ( 'NONE', #53411, 10.00000000000009200 ) ; +#71283 = ORIENTED_EDGE ( 'NONE', *, *, #34542, .F. ) ; +#71284 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428600900, 41.52858243452104900, -28.70555803802997700 ) ) ; +#71285 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71286 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 24.86787096422377300, -28.37244029424742900 ) ) ; +#71287 = AXIS2_PLACEMENT_3D ( 'NONE', #48170, #29749, #4681 ) ; +#71288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71289 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#71290 = CARTESIAN_POINT ( 'NONE', ( -3.985751803131264600, 70.01994747561620600, -28.24986299608849500 ) ) ; +#71291 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346230100, 61.39409401757591000, -28.39369363572396000 ) ) ; +#71292 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 48.33333333333334300, 2.794441961969998300 ) ) ; +#71293 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#71294 = ORIENTED_EDGE ( 'NONE', *, *, #69502, .F. ) ; +#71295 = ORIENTED_EDGE ( 'NONE', *, *, #21077, .T. ) ; +#71296 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 15.83333333333334300, 6.794441961969992500 ) ) ; +#71297 = CARTESIAN_POINT ( 'NONE', ( -3.500000000000035100, 70.69949493661177100, -28.70555803802997700 ) ) ; +#71298 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194922800, 86.76150692817462600, -28.68631150211662400 ) ) ; +#71299 = ORIENTED_EDGE ( 'NONE', *, *, #64785, .F. ) ; +#71300 = ADVANCED_FACE ( 'NONE', ( #26615 ), #41181, .T. ) ; +#71301 = CIRCLE ( 'NONE', #42849, 10.50000000000009600 ) ; +#71302 = EDGE_LOOP ( 'NONE', ( #14751, #30003, #61067, #49152 ) ) ; +#71303 = CONICAL_SURFACE ( 'NONE', #9136, 10.00000000000009200, 0.7853981633974447300 ) ; +#71304 = VERTEX_POINT ( 'NONE', #63798 ) ; +#71305 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#71306 = ORIENTED_EDGE ( 'NONE', *, *, #26095, .F. ) ; +#71307 = FACE_OUTER_BOUND ( 'NONE', #65638, .T. ) ; +#71308 = EDGE_CURVE ( 'NONE', #74506, #49135, #57721, .T. ) ; +#71309 = ORIENTED_EDGE ( 'NONE', *, *, #43069, .F. ) ; +#71310 = CARTESIAN_POINT ( 'NONE', ( -16.62989890881928500, 39.98699567717052600, -28.57183973513139500 ) ) ; +#71311 = ORIENTED_EDGE ( 'NONE', *, *, #2100, .F. ) ; +#71312 = ADVANCED_FACE ( 'NONE', ( #11998 ), #72357, .F. ) ; +#71313 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 19.16666666666667500, -6.205558038030004800 ) ) ; +#71314 = EDGE_LOOP ( 'NONE', ( #58136, #13212, #77367 ) ) ; +#71315 = CARTESIAN_POINT ( 'NONE', ( -5.501847909390807700, 23.91466791010178700, -28.53910738522650100 ) ) ; +#71316 = CONICAL_SURFACE ( 'NONE', #78043, 10.50000000000009200, 0.7853981633974482800 ) ; +#71317 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71318 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#71319 = CARTESIAN_POINT ( 'NONE', ( -16.15668877708535300, 65.79999999999999700, -28.63843632546336000 ) ) ; +#71320 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 59.33333333333334300, -8.133761268305512700 ) ) ; +#71321 = EDGE_CURVE ( 'NONE', #11971, #16279, #8065, .T. ) ; +#71322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4828, #79378, #54607, #17354 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004288800 ), + .UNSPECIFIED. ) ; +#71323 = ORIENTED_EDGE ( 'NONE', *, *, #79860, .F. ) ; +#71324 = AXIS2_PLACEMENT_3D ( 'NONE', #38025, #7034, #43998 ) ; +#71325 = CARTESIAN_POINT ( 'NONE', ( -11.72076650305797700, 90.09951448976264000, -28.63282631410026700 ) ) ; +#71326 = CIRCLE ( 'NONE', #9741, 10.50000000000009800 ) ; +#71327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71328 = EDGE_LOOP ( 'NONE', ( #67118, #72924, #36060 ) ) ; +#71329 = ADVANCED_FACE ( 'NONE', ( #43124 ), #22699, .T. ) ; +#71330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71331 = ORIENTED_EDGE ( 'NONE', *, *, #59897, .F. ) ; +#71332 = EDGE_LOOP ( 'NONE', ( #38004, #1230, #73815 ) ) ; +#71333 = FACE_OUTER_BOUND ( 'NONE', #67564, .T. ) ; +#71334 = VERTEX_POINT ( 'NONE', #45495 ) ; +#71335 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171911600, 71.13768531620287700, -28.37082013777851900 ) ) ; +#71336 = CIRCLE ( 'NONE', #46562, 9.500000000000095900 ) ; +#71337 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#71338 = AXIS2_PLACEMENT_3D ( 'NONE', #30290, #36490, #67519 ) ; +#71340 = VERTEX_POINT ( 'NONE', #8249 ) ; +#71339 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#71341 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66923, #48116, #73189, #35915 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695389519249200E-007, 0.0007987676590765212600 ), + .UNSPECIFIED. ) ; +#71342 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 79.63176086632792300, -28.70555803802997700 ) ) ; +#71343 = EDGE_CURVE ( 'NONE', #65404, #12876, #75850, .T. ) ; +#71344 = EDGE_CURVE ( 'NONE', #42850, #1580, #24644, .T. ) ; +#71345 = ADVANCED_FACE ( 'NONE', ( #55759 ), #39550, .T. ) ; +#71346 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807153100, 76.79999999999998300, -28.70555803802997700 ) ) ; +#71347 = ORIENTED_EDGE ( 'NONE', *, *, #76100, .F. ) ; +#71349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71348 = AXIS2_PLACEMENT_3D ( 'NONE', #41842, #66354, #4585 ) ; +#71350 = ORIENTED_EDGE ( 'NONE', *, *, #28980, .F. ) ; +#71351 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 21.66666666666667900, 1.294441961969997200 ) ) ; +#71352 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71353 = CARTESIAN_POINT ( 'NONE', ( 17.91635473408279100, 20.21413374642151700, -28.27331438134755700 ) ) ; +#71354 = CIRCLE ( 'NONE', #66411, 10.00000000000009200 ) ; +#71355 = EDGE_LOOP ( 'NONE', ( #2742, #61171, #1360 ) ) ; +#71356 = FACE_OUTER_BOUND ( 'NONE', #494, .T. ) ; +#71357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78328, #34817, #10043, #53564 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632879459800E-007, 0.0008082706238600318200 ), + .UNSPECIFIED. ) ; +#71359 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428590300, 60.07141756547895300, -28.70555803802997700 ) ) ; +#71360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71361 = AXIS2_PLACEMENT_3D ( 'NONE', #27172, #58155, #64451 ) ; +#71362 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 70.79999999999998300, -28.45034744217088700 ) ) ; +#71363 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 81.65075715145215400, -28.20555803803047800 ) ) ; +#71364 = EDGE_CURVE ( 'NONE', #22165, #59629, #39203, .T. ) ; +#71365 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71366 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715068300, 41.32033471810043300, -28.30868034705250800 ) ) ; +#71367 = ADVANCED_FACE ( 'NONE', ( #10047 ), #20744, .T. ) ; +#71368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71369 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#71370 = AXIS2_PLACEMENT_3D ( 'NONE', #21426, #64955, #27680 ) ; +#71371 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#71372 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428587200, 51.52858243452104900, -28.70555803802997700 ) ) ; +#71373 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68659, #62405, #105, #31414 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202128840600E-007, 0.0008724366121404704500 ), + .UNSPECIFIED. ) ; +#71374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71376 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995701400, 25.48096581827318700, -28.69431509262337700 ) ) ; +#71377 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#71378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71379 = AXIS2_PLACEMENT_3D ( 'NONE', #40862, #15581, #78134 ) ; +#71380 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875016000, 85.13282980700523700, -28.53914313452735000 ) ) ; +#71381 = ORIENTED_EDGE ( 'NONE', *, *, #64789, .F. ) ; +#71382 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71383 = ORIENTED_EDGE ( 'NONE', *, *, #65355, .F. ) ; +#71384 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540436700, 52.51973550835660400, -28.70555803802997400 ) ) ; +#71385 = CONICAL_SURFACE ( 'NONE', #9979, 10.00000000000009600, 0.7853981633974447300 ) ; +#71386 = AXIS2_PLACEMENT_3D ( 'NONE', #7241, #50745, #13544 ) ; +#71387 = ORIENTED_EDGE ( 'NONE', *, *, #41097, .T. ) ; +#71388 = CIRCLE ( 'NONE', #73766, 10.00000000000009400 ) ; +#71389 = ORIENTED_EDGE ( 'NONE', *, *, #46994, .T. ) ; +#71390 = CONICAL_SURFACE ( 'NONE', #35561, 10.50000000000009600, 0.7853981633974518300 ) ; +#71391 = ORIENTED_EDGE ( 'NONE', *, *, #35031, .T. ) ; +#71392 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189933600, 49.12363993080087000, -28.38670679782168800 ) ) ; +#71393 = ORIENTED_EDGE ( 'NONE', *, *, #61241, .T. ) ; +#71394 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 65.33333333333334300, -5.205558038030008400 ) ) ; +#71395 = AXIS2_PLACEMENT_3D ( 'NONE', #33470, #39444, #14706 ) ; +#71396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#71397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51997, #45740, #2245, #58292 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459151199605300E-007, 0.0007679767755139799300 ), + .UNSPECIFIED. ) ; +#71398 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609141700, 70.13716795162640900, -28.48697406221694500 ) ) ; +#71399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71400 = EDGE_CURVE ( 'NONE', #44748, #42900, #53822, .T. ) ; +#71401 = FACE_OUTER_BOUND ( 'NONE', #69080, .T. ) ; +#71402 = ORIENTED_EDGE ( 'NONE', *, *, #21665, .T. ) ; +#71403 = CIRCLE ( 'NONE', #10221, 9.500000000000099500 ) ; +#71404 = ORIENTED_EDGE ( 'NONE', *, *, #50797, .T. ) ; +#71405 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853309800, 17.80869142985013200, -28.37223374938545800 ) ) ; +#71406 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#71407 = ORIENTED_EDGE ( 'NONE', *, *, #7692, .T. ) ; +#71408 = VERTEX_POINT ( 'NONE', #21349 ) ; +#71409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71410 = ORIENTED_EDGE ( 'NONE', *, *, #22613, .T. ) ; +#71411 = CONICAL_SURFACE ( 'NONE', #30432, 10.00000000000009200, 0.7853981633974447300 ) ; +#71412 = ADVANCED_FACE ( 'NONE', ( #70357 ), #51830, .T. ) ; +#71413 = ORIENTED_EDGE ( 'NONE', *, *, #59336, .T. ) ; +#71414 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71415 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#71416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71417 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001800, 30.56914835874665200, -28.45573375118225500 ) ) ; +#71418 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 36.66666666666667900, 8.320721403598824400 ) ) ; +#71419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71420 = ORIENTED_EDGE ( 'NONE', *, *, #36171, .T. ) ; +#71421 = CARTESIAN_POINT ( 'NONE', ( -9.438065798940476400, 49.61613388835920800, -28.57723500840079800 ) ) ; +#71422 = EDGE_LOOP ( 'NONE', ( #41722, #62455, #3336, #13651 ) ) ; +#71423 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841341200, 18.16349705304836000, -28.30782889147495100 ) ) ; +#71424 = EDGE_CURVE ( 'NONE', #24293, #50416, #4188, .T. ) ; +#71425 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71426 = ORIENTED_EDGE ( 'NONE', *, *, #73488, .F. ) ; +#71427 = ADVANCED_FACE ( 'NONE', ( #37252 ), #2211, .F. ) ; +#71428 = FACE_OUTER_BOUND ( 'NONE', #14099, .T. ) ; +#71429 = EDGE_CURVE ( 'NONE', #8089, #7615, #61428, .T. ) ; +#71430 = CARTESIAN_POINT ( 'NONE', ( 9.997978530266236100, 39.28907435382947700, -28.25433648786265600 ) ) ; +#71431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71432 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143800, 51.52858243452106300, -28.70555803802997700 ) ) ; +#71433 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006200, 28.66749699759768400, -28.20555803802994200 ) ) ; +#71434 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71435 = ADVANCED_FACE ( 'NONE', ( #6141 ), #49888, .T. ) ; +#71436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71437 = EDGE_CURVE ( 'NONE', #64092, #62053, #46901, .T. ) ; +#71438 = ADVANCED_FACE ( 'NONE', ( #35361 ), #16846, .F. ) ; +#71439 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71441 = EDGE_CURVE ( 'NONE', #20052, #21357, #32465, .T. ) ; +#71442 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.99747404049738400, -28.26641963845862500 ) ) ; +#71443 = AXIS2_PLACEMENT_3D ( 'NONE', #70224, #51427, #75952 ) ; +#71444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71445 = CARTESIAN_POINT ( 'NONE', ( 17.41542217839996100, 81.18375493410853500, -28.40985430318292200 ) ) ; +#71446 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -0.9999999999999870100, -9.205558038030005700 ) ) ; +#71447 = CIRCLE ( 'NONE', #59131, 10.50000000000009800 ) ; +#71448 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#71449 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707913600, 81.66410593583241000, -28.68054222049963500 ) ) ; +#71450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60391, #72627, #66625, #29408 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.067405673014219100E-007, 0.0007670610367943039100 ), + .UNSPECIFIED. ) ; +#71451 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#71452 = ORIENTED_EDGE ( 'NONE', *, *, #22863, .F. ) ; +#71453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71454 = CARTESIAN_POINT ( 'NONE', ( 4.561825084090591200, 9.983857102125089300, -28.57719681746165500 ) ) ; +#71455 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105215100, 51.31766786975352100, -28.25051428653849300 ) ) ; +#71456 = AXIS2_PLACEMENT_3D ( 'NONE', #53658, #3876, #10157 ) ; +#71457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71459 = ORIENTED_EDGE ( 'NONE', *, *, #47576, .F. ) ; +#71458 = EDGE_CURVE ( 'NONE', #13443, #29005, #68425, .T. ) ; +#71460 = EDGE_CURVE ( 'NONE', #66775, #64447, #66485, .T. ) ; +#71461 = CARTESIAN_POINT ( 'NONE', ( -1.899882735204323000, 24.55000000000000100, -28.53808257741933100 ) ) ; +#71462 = EDGE_CURVE ( 'NONE', #6017, #25149, #30517, .T. ) ; +#71463 = ORIENTED_EDGE ( 'NONE', *, *, #14513, .F. ) ; +#71464 = CARTESIAN_POINT ( 'NONE', ( 17.38231690878861000, 31.20496220355531100, -28.41840204704135100 ) ) ; +#71465 = CONICAL_SURFACE ( 'NONE', #18792, 10.50000000000009600, 0.7853981633974500600 ) ; +#71466 = ORIENTED_EDGE ( 'NONE', *, *, #62412, .F. ) ; +#71467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#71468 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851103000, 15.00238095238043800, -28.70555803802992800 ) ) ; +#71469 = CONICAL_SURFACE ( 'NONE', #78419, 10.50000000000009600, 0.7853981633974482800 ) ; +#71470 = ORIENTED_EDGE ( 'NONE', *, *, #26956, .F. ) ; +#71471 = AXIS2_PLACEMENT_3D ( 'NONE', #55574, #74103, #49288 ) ; +#71472 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 77.94142842854304800, -28.20555803803030800 ) ) ; +#71473 = FACE_OUTER_BOUND ( 'NONE', #42658, .T. ) ; +#71474 = CARTESIAN_POINT ( 'NONE', ( -11.56194429656798300, 18.11613305479827200, -28.57723854182872700 ) ) ; +#71475 = CIRCLE ( 'NONE', #33573, 10.00000000000009400 ) ; +#71477 = ORIENTED_EDGE ( 'NONE', *, *, #30243, .T. ) ; +#71476 = CARTESIAN_POINT ( 'NONE', ( 10.97683272551938500, 49.58088969930749800, -28.30223898143228900 ) ) ; +#71478 = VERTEX_POINT ( 'NONE', #22411 ) ; +#71479 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655698900, 28.42298334620753800, -28.20555803802994500 ) ) ; +#71480 = EDGE_CURVE ( 'NONE', #30284, #72537, #33374, .T. ) ; +#71481 = EDGE_LOOP ( 'NONE', ( #14438, #71152, #60642, #53329, #41356 ) ) ; +#71482 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148632300, 46.50238095238078300, -28.70555803802996700 ) ) ; +#71483 = AXIS2_PLACEMENT_3D ( 'NONE', #12717, #56200, #18944 ) ; +#71484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71485 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40238, #65576, #3510, #47012 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565741034105000E-007, 0.0002592140922089885100 ), + .UNSPECIFIED. ) ; +#71488 = CIRCLE ( 'NONE', #58121, 10.00000000000009200 ) ; +#71489 = ORIENTED_EDGE ( 'NONE', *, *, #56177, .F. ) ; +#71490 = CIRCLE ( 'NONE', #70610, 9.500000000000099500 ) ; +#71491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71492 = ORIENTED_EDGE ( 'NONE', *, *, #14957, .T. ) ; +#71493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71494 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 8.333333333333342800, 8.320721403598817300 ) ) ; +#71495 = ORIENTED_EDGE ( 'NONE', *, *, #49016, .T. ) ; +#71496 = VERTEX_POINT ( 'NONE', #41163 ) ; +#71497 = ORIENTED_EDGE ( 'NONE', *, *, #627, .T. ) ; +#71498 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432791300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#71499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71500 = ORIENTED_EDGE ( 'NONE', *, *, #65312, .T. ) ; +#71501 = CONICAL_SURFACE ( 'NONE', #35090, 10.50000000000009600, 0.7853981633974500600 ) ; +#71502 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 42.66666666666667900, -3.705558038030004400 ) ) ; +#71503 = AXIS2_PLACEMENT_3D ( 'NONE', #30902, #61920, #74423 ) ; +#71504 = ORIENTED_EDGE ( 'NONE', *, *, #35247, .F. ) ; +#71505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71506 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51379, #14442, #57947, #20701 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007639752840043633300, 0.008406583008691305100 ), + .UNSPECIFIED. ) ; +#71508 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#71509 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 7.666666666666682900, -5.205558038030003100 ) ) ; +#71510 = VERTEX_POINT ( 'NONE', #3616 ) ; +#71511 = VERTEX_POINT ( 'NONE', #16426 ) ; +#71512 = AXIS2_PLACEMENT_3D ( 'NONE', #48372, #35892, #4874 ) ; +#71513 = CARTESIAN_POINT ( 'NONE', ( 2.255140518769849200E-013, 16.62623792124918900, -28.70555803802992800 ) ) ; +#71514 = ORIENTED_EDGE ( 'NONE', *, *, #39140, .F. ) ; +#71515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71516 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71517 = EDGE_CURVE ( 'NONE', #8048, #72721, #18783, .T. ) ; +#71518 = CIRCLE ( 'NONE', #7474, 10.00000000000009200 ) ; +#71519 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 45.00000000000000700, -1.205558038030002800 ) ) ; +#71520 = AXIS2_PLACEMENT_3D ( 'NONE', #449, #43944, #6716 ) ; +#71521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71522 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71523 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#71524 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#71525 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71526 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#71527 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 39.37705528805138800, -28.20555803802995200 ) ) ; +#71528 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#71529 = FACE_OUTER_BOUND ( 'NONE', #26433, .T. ) ; +#71530 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428572100, 77.92318720225497900, -28.70555803802997700 ) ) ; +#71531 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71532 = CARTESIAN_POINT ( 'NONE', ( -17.90495709205875800, 39.08245724453602300, -28.27504145778804900 ) ) ; +#71533 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19713, #75715, #57235, #19992 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611722236285700E-007, 0.0002592600401783434900 ), + .UNSPECIFIED. ) ; +#71534 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142858902700, 77.92318720225479500, -28.70555803802997700 ) ) ; +#71535 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71536 = ORIENTED_EDGE ( 'NONE', *, *, #61760, .T. ) ; +#71537 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074373200, 48.81967837323414000, -28.55467576046958200 ) ) ; +#71538 = EDGE_LOOP ( 'NONE', ( #77227, #57201, #78110, #68451 ) ) ; +#71539 = ADVANCED_FACE ( 'NONE', ( #28586 ), #62571, .T. ) ; +#71540 = CONICAL_SURFACE ( 'NONE', #60939, 10.50000000000009600, 0.7853981633974518300 ) ; +#71541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71542 = CARTESIAN_POINT ( 'NONE', ( 3.207944239505017100, 49.19228657120669400, -28.53891855579996000 ) ) ; +#71543 = ORIENTED_EDGE ( 'NONE', *, *, #46994, .F. ) ; +#71544 = ADVANCED_FACE ( 'NONE', ( #47943 ), #29519, .T. ) ; +#71545 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#71546 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#71547 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 89.91070809551072800, -28.20555803803030800 ) ) ; +#71548 = FACE_OUTER_BOUND ( 'NONE', #55679, .T. ) ; +#71549 = FACE_OUTER_BOUND ( 'NONE', #49640, .T. ) ; +#71551 = EDGE_CURVE ( 'NONE', #462, #214, #18019, .T. ) ; +#71550 = ORIENTED_EDGE ( 'NONE', *, *, #45299, .F. ) ; +#71552 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 48.49999999999998600, 4.650848422521016300 ) ) ; +#71553 = CARTESIAN_POINT ( 'NONE', ( 5.030698080332740600E-014, 72.97376207875062400, -28.70555803802997700 ) ) ; +#71554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71555 = EDGE_CURVE ( 'NONE', #79302, #59770, #3535, .T. ) ; +#71556 = FACE_OUTER_BOUND ( 'NONE', #20841, .T. ) ; +#71557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71558 = EDGE_LOOP ( 'NONE', ( #20525, #48752, #78646, #73296, #2884 ) ) ; +#71559 = VERTEX_POINT ( 'NONE', #72730 ) ; +#71560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71561 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71563 = EDGE_CURVE ( 'NONE', #167, #6326, #64549, .T. ) ; +#71564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71565 = ADVANCED_FACE ( 'NONE', ( #31451 ), #78991, .T. ) ; +#71566 = CONICAL_SURFACE ( 'NONE', #12762, 10.00000000000009400, 0.7853981633974447300 ) ; +#71567 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999998800, 41.43250300240230600, -28.20555803802997700 ) ) ; +#71568 = ORIENTED_EDGE ( 'NONE', *, *, #32164, .T. ) ; +#71569 = EDGE_CURVE ( 'NONE', #54772, #57143, #69858, .T. ) ; +#71570 = FACE_OUTER_BOUND ( 'NONE', #46462, .T. ) ; +#71571 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 50.50000000000000700, -7.061964498581025000 ) ) ; +#71572 = EDGE_CURVE ( 'NONE', #426, #78197, #79136, .T. ) ; +#71573 = ORIENTED_EDGE ( 'NONE', *, *, #49872, .F. ) ; +#71574 = ORIENTED_EDGE ( 'NONE', *, *, #77745, .T. ) ; +#71575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71576 = ORIENTED_EDGE ( 'NONE', *, *, #47679, .T. ) ; +#71577 = ORIENTED_EDGE ( 'NONE', *, *, #72345, .F. ) ; +#71578 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492457900, 30.39456479767170500, -28.70555803802995200 ) ) ; +#71579 = EDGE_LOOP ( 'NONE', ( #7015, #71891, #53309, #10322, #20463 ) ) ; +#71580 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 13.66666666666667700, -8.133761268305512700 ) ) ; +#71581 = CARTESIAN_POINT ( 'NONE', ( 20.13486888978015400, 94.16743374641140500, -27.28653802249667100 ) ) ; +#71582 = CIRCLE ( 'NONE', #39053, 10.50000000000009600 ) ; +#71583 = ORIENTED_EDGE ( 'NONE', *, *, #48771, .F. ) ; +#71584 = AXIS2_PLACEMENT_3D ( 'NONE', #52288, #77078, #2797 ) ; +#71585 = EDGE_CURVE ( 'NONE', #51034, #69179, #55397, .T. ) ; +#71586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71587 = EDGE_CURVE ( 'NONE', #46727, #12956, #14884, .T. ) ; +#71588 = EDGE_CURVE ( 'NONE', #66558, #11977, #45989, .T. ) ; +#71589 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914546900, 51.82440674572707500, -28.45987523529580100 ) ) ; +#71590 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53950, #73010, #10988, #54490 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.586399032799689000E-007, 0.0009968645831862747500 ), + .UNSPECIFIED. ) ; +#71591 = PRODUCT ( 'Trellais_Rear_Plate', 'Trellais_Rear_Plate', '', ( #43970 ) ) ; +#71592 = ORIENTED_EDGE ( 'NONE', *, *, #79810, .F. ) ; +#71593 = ORIENTED_EDGE ( 'NONE', *, *, #63304, .T. ) ; +#71594 = FACE_OUTER_BOUND ( 'NONE', #27848, .T. ) ; +#71595 = AXIS2_PLACEMENT_3D ( 'NONE', #6412, #145, #49890 ) ; +#71596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71597 = ORIENTED_EDGE ( 'NONE', *, *, #53197, .F. ) ; +#71598 = CONICAL_SURFACE ( 'NONE', #51156, 10.50000000000009600, 0.7853981633974500600 ) ; +#71599 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428576500, 49.57141756547892400, -28.70555803802996700 ) ) ; +#71600 = AXIS2_PLACEMENT_3D ( 'NONE', #46809, #9562, #53074 ) ; +#71601 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 17.00000000000001800, 3.794441961969998300 ) ) ; +#71602 = AXIS2_PLACEMENT_3D ( 'NONE', #4788, #48291, #11076 ) ; +#71603 = AXIS2_PLACEMENT_3D ( 'NONE', #68000, #49197, #24486 ) ; +#71604 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 79.98922577050341000, -28.37255355648633800 ) ) ; +#71605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71607 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 57.16666666666667900, 6.794441961969992500 ) ) ; +#71608 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116473800, 39.20564881207762700, -28.41114655922298800 ) ) ; +#71609 = LINE ( 'NONE', #41338, #32647 ) ; +#71610 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566652700, 24.55000000000001100, -28.70555803802994200 ) ) ; +#71611 = CARTESIAN_POINT ( 'NONE', ( 16.33257079600093000, 13.47013982134300600, -28.62099087449131900 ) ) ; +#71612 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#71613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71614 = ORIENTED_EDGE ( 'NONE', *, *, #33566, .T. ) ; +#71615 = LINE ( 'NONE', #62339, #21973 ) ; +#71616 = AXIS2_PLACEMENT_3D ( 'NONE', #9877, #40882, #47106 ) ; +#71617 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567175800, 41.24660241562182300, -28.20555803802996700 ) ) ; +#71618 = VERTEX_POINT ( 'NONE', #30038 ) ; +#71619 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#71620 = ADVANCED_FACE ( 'NONE', ( #77162 ), #75215, .T. ) ; +#71621 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339003800, 90.13716795162648100, -28.48697406221665300 ) ) ; +#71622 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71623 = CARTESIAN_POINT ( 'NONE', ( -3.535534863808977900, 9.181517971446963200, -28.67456072961195100 ) ) ; +#71624 = CONICAL_SURFACE ( 'NONE', #28128, 10.50000000000009600, 0.7853981633974518300 ) ; +#71625 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71626 = CIRCLE ( 'NONE', #45967, 9.500000000000099500 ) ; +#71627 = VERTEX_POINT ( 'NONE', #11519 ) ; +#71628 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#71629 = EDGE_CURVE ( 'NONE', #76297, #30287, #10995, .T. ) ; +#71630 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71631 = FACE_OUTER_BOUND ( 'NONE', #63149, .T. ) ; +#71632 = CARTESIAN_POINT ( 'NONE', ( -2.279233496942129300, 60.09951448976266900, -28.63282631410022800 ) ) ; +#71633 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#71634 = AXIS2_PLACEMENT_3D ( 'NONE', #76998, #39731, #2453 ) ; +#71635 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2187, #39459, #76722, #45685 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408024394300, 0.0006251342085512214900 ), + .UNSPECIFIED. ) ; +#71636 = ORIENTED_EDGE ( 'NONE', *, *, #65173, .T. ) ; +#71637 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 70.51916201875668800, -28.45106778992437700 ) ) ; +#71638 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71639 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71641 = ORIENTED_EDGE ( 'NONE', *, *, #78880, .T. ) ; +#71640 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71642 = ADVANCED_FACE ( 'NONE', ( #12947 ), #55008, .T. ) ; +#71643 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#71644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71645 = CARTESIAN_POINT ( 'NONE', ( 9.279102202939128600, 61.50050326225941400, -28.63287226700145600 ) ) ; +#71646 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658253800, 28.65151454780961900, -28.67627428870437400 ) ) ; +#71647 = CIRCLE ( 'NONE', #17029, 10.00000000000009600 ) ; +#71648 = CARTESIAN_POINT ( 'NONE', ( 17.03295546792551800, 63.19758746877411700, -28.49829281932971300 ) ) ; +#71649 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#71650 = FACE_OUTER_BOUND ( 'NONE', #60261, .T. ) ; +#71651 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462826700, 80.34267608797601700, -28.20555803803030800 ) ) ; +#71652 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298124000, 65.79999999999999700, -28.70555803802997700 ) ) ; +#71653 = ORIENTED_EDGE ( 'NONE', *, *, #40200, .F. ) ; +#71654 = AXIS2_PLACEMENT_3D ( 'NONE', #9405, #77686, #15677 ) ; +#71655 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274711400, 34.73212903577628200, -28.37244029424741100 ) ) ; +#71656 = ORIENTED_EDGE ( 'NONE', *, *, #35497, .F. ) ; +#71657 = ORIENTED_EDGE ( 'NONE', *, *, #36580, .T. ) ; +#71658 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71659 = VERTEX_POINT ( 'NONE', #55272 ) ; +#71660 = ORIENTED_EDGE ( 'NONE', *, *, #69653, .F. ) ; +#71661 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 80.34267608797554800, -28.20555803803047800 ) ) ; +#71662 = CARTESIAN_POINT ( 'NONE', ( -4.205848596537570000, 71.39409401757629300, -28.39369363572365000 ) ) ; +#71663 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000046900, 70.36203212531218300, -28.38801640354843100 ) ) ; +#71664 = CIRCLE ( 'NONE', #28756, 10.00000000000009200 ) ; +#71665 = FACE_OUTER_BOUND ( 'NONE', #73432, .T. ) ; +#71666 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#71667 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217489500, 61.43945992495501700, -28.34042301926910000 ) ) ; +#71668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71669 = ORIENTED_EDGE ( 'NONE', *, *, #50566, .F. ) ; +#71670 = AXIS2_PLACEMENT_3D ( 'NONE', #59359, #22103, #65627 ) ; +#71671 = ORIENTED_EDGE ( 'NONE', *, *, #75390, .T. ) ; +#71672 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.10252595950261400, -28.26641963845862500 ) ) ; +#71673 = ADVANCED_FACE ( 'NONE', ( #266 ), #8994, .T. ) ; +#71674 = CONICAL_SURFACE ( 'NONE', #63869, 10.50000000000009600, 0.7853981633974518300 ) ; +#71675 = ORIENTED_EDGE ( 'NONE', *, *, #32018, .F. ) ; +#71676 = EDGE_CURVE ( 'NONE', #34194, #23418, #25593, .T. ) ; +#71677 = ORIENTED_EDGE ( 'NONE', *, *, #10210, .F. ) ; +#71678 = FACE_OUTER_BOUND ( 'NONE', #37501, .T. ) ; +#71679 = CARTESIAN_POINT ( 'NONE', ( 8.705837858217822900, 45.54999999999999700, -28.37136602294610600 ) ) ; +#71680 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 63.16666666666667900, 0.9380355014189834000 ) ) ; +#71681 = ORIENTED_EDGE ( 'NONE', *, *, #16421, .F. ) ; +#71682 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 38.98922577050341700, -28.37255355648632400 ) ) ; +#71683 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528429300, 18.13131911501857700, -28.51286550264478600 ) ) ; +#71684 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58535, #58792, #77572, #40286 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390012246100E-007, 0.0008082646680357329000 ), + .UNSPECIFIED. ) ; +#71685 = CARTESIAN_POINT ( 'NONE', ( -10.94287326853334400, 41.79130857014965300, -28.37223374938519500 ) ) ; +#71686 = EDGE_CURVE ( 'NONE', #40742, #24196, #42095, .T. ) ; +#71687 = EDGE_CURVE ( 'NONE', #69152, #1761, #40944, .T. ) ; +#71688 = CONICAL_SURFACE ( 'NONE', #1069, 10.00000000000009400, 0.7853981633974447300 ) ; +#71689 = ORIENTED_EDGE ( 'NONE', *, *, #58098, .F. ) ; +#71690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71691 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19348, #56605, #69120, #31876 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799627037400E-007, 0.0005050252131287522600 ), + .UNSPECIFIED. ) ; +#71692 = FACE_OUTER_BOUND ( 'NONE', #25926, .T. ) ; +#71693 = ORIENTED_EDGE ( 'NONE', *, *, #73038, .F. ) ; +#71694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29346, #72821, #48017, #10801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854446900, 0.0007596411030281073400 ), + .UNSPECIFIED. ) ; +#71695 = ORIENTED_EDGE ( 'NONE', *, *, #29240, .F. ) ; +#71696 = CIRCLE ( 'NONE', #32680, 9.500000000000099500 ) ; +#71697 = AXIS2_PLACEMENT_3D ( 'NONE', #37077, #80619, #43338 ) ; +#71698 = EDGE_CURVE ( 'NONE', #2092, #18050, #26514, .T. ) ; +#71699 = EDGE_CURVE ( 'NONE', #47662, #80789, #12045, .T. ) ; +#71700 = ORIENTED_EDGE ( 'NONE', *, *, #43040, .T. ) ; +#71701 = EDGE_CURVE ( 'NONE', #106, #73720, #44025, .T. ) ; +#71702 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71703 = CARTESIAN_POINT ( 'NONE', ( 17.21407029990559700, 8.186813333409483900, -28.43233123478979300 ) ) ; +#71704 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428623100, 10.02858243452102000, -28.70555803802994200 ) ) ; +#71705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71706 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 34.50000000000000700, -9.258116921287651700 ) ) ; +#71707 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72182, #59935, #78707, #41406 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859823774700E-007, 0.0008759659331885342900 ), + .UNSPECIFIED. ) ; +#71708 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 36.94142842854304100, -28.20555803802995200 ) ) ; +#71709 = EDGE_CURVE ( 'NONE', #34438, #21498, #78365, .T. ) ; +#71710 = CONICAL_SURFACE ( 'NONE', #16069, 10.50000000000009600, 0.7853981633974500600 ) ; +#71711 = AXIS2_PLACEMENT_3D ( 'NONE', #67173, #17402, #23669 ) ; +#71712 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561200, 85.79999999999998300, -28.70525300642875200 ) ) ; +#71713 = CONICAL_SURFACE ( 'NONE', #33966, 10.00000000000009200, 0.7853981633974447300 ) ; +#71714 = CARTESIAN_POINT ( 'NONE', ( 4.469863111190076000, 9.146957350529831400, -28.66910751791844100 ) ) ; +#71715 = VERTEX_POINT ( 'NONE', #18560 ) ; +#71716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71717 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#71718 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857148900, 81.52858243452072900, -28.70555803803030800 ) ) ; +#71719 = ORIENTED_EDGE ( 'NONE', *, *, #16072, .F. ) ; +#71720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71722 = VERTEX_POINT ( 'NONE', #24821 ) ; +#71723 = AXIS2_PLACEMENT_3D ( 'NONE', #30950, #74470, #37162 ) ; +#71724 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192773200, 64.80000000000008200, -28.70555803802997700 ) ) ; +#71725 = AXIS2_PLACEMENT_3D ( 'NONE', #48579, #11372, #54861 ) ; +#71726 = ADVANCED_FACE ( 'NONE', ( #27549 ), #71303, .T. ) ; +#71727 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#71728 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252814400, 41.46868088498121800, -28.51286550264512700 ) ) ; +#71729 = FACE_OUTER_BOUND ( 'NONE', #43639, .T. ) ; +#71730 = CARTESIAN_POINT ( 'NONE', ( -5.148153789003688800, 75.79999999999998300, -28.37148172714571000 ) ) ; +#71731 = VERTEX_POINT ( 'NONE', #62354 ) ; +#71732 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71733 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, -3.166666666666655000, 6.794441961969992500 ) ) ; +#71734 = ORIENTED_EDGE ( 'NONE', *, *, #28257, .F. ) ; +#71735 = CARTESIAN_POINT ( 'NONE', ( 16.52200773130722300, 20.47693523592567600, -28.54785533207243700 ) ) ; +#71736 = ORIENTED_EDGE ( 'NONE', *, *, #42214, .F. ) ; +#71737 = ORIENTED_EDGE ( 'NONE', *, *, #29904, .T. ) ; +#71738 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#71739 = CARTESIAN_POINT ( 'NONE', ( -2.279233496942131100, 90.09951448976265500, -28.63282631410022500 ) ) ; +#71740 = FACE_OUTER_BOUND ( 'NONE', #48739, .T. ) ; +#71741 = CARTESIAN_POINT ( 'NONE', ( 4.035907765261414100, 39.00212297965146700, -28.25344967589764200 ) ) ; +#71742 = ADVANCED_FACE ( 'NONE', ( #60643 ), #38186, .F. ) ; +#71743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71744 = AXIS2_PLACEMENT_3D ( 'NONE', #45958, #8692, #52196 ) ; +#71745 = ORIENTED_EDGE ( 'NONE', *, *, #48649, .T. ) ; +#71746 = EDGE_CURVE ( 'NONE', #53406, #29818, #63905, .T. ) ; +#71747 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 79.28967419478925600, -28.59353418718928100 ) ) ; +#71748 = EDGE_LOOP ( 'NONE', ( #34681, #3371, #47565, #15700 ) ) ; +#71749 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54845, #11358, #67375, #30142 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025105167900, 0.0005411754951808785800 ), + .UNSPECIFIED. ) ; +#71750 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#71751 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506394600, 39.08087956867519400, -28.30223257055573400 ) ) ; +#71752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71753 = CONICAL_SURFACE ( 'NONE', #51776, 10.50000000000009800, 0.7853981633974500600 ) ; +#71754 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71755 = ORIENTED_EDGE ( 'NONE', *, *, #54766, .T. ) ; +#71756 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, 69.97246552159074900, -28.38801640354893200 ) ) ; +#71757 = ADVANCED_FACE ( 'NONE', ( #73282 ), #5123, .T. ) ; +#71758 = EDGE_CURVE ( 'NONE', #20378, #19682, #21693, .T. ) ; +#71759 = ORIENTED_EDGE ( 'NONE', *, *, #40241, .F. ) ; +#71760 = CONICAL_SURFACE ( 'NONE', #565, 10.00000000000009200, 0.7853981633974447300 ) ; +#71761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71762 = AXIS2_PLACEMENT_3D ( 'NONE', #74070, #80313, #67536 ) ; +#71763 = CONICAL_SURFACE ( 'NONE', #35568, 10.00000000000009200, 0.7853981633974447300 ) ; +#71764 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71765 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 46.72261628933269900, -28.70555803802996700 ) ) ; +#71766 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#71767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71768 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650753900, 30.39456479767170200, -28.70555803802995200 ) ) ; +#71769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71770 = VERTEX_POINT ( 'NONE', #75119 ) ; +#71771 = ADVANCED_FACE ( 'NONE', ( #54752 ), #36267, .T. ) ; +#71772 = AXIS2_PLACEMENT_3D ( 'NONE', #52121, #14900, #58418 ) ; +#71773 = CIRCLE ( 'NONE', #5734, 10.50000000000009900 ) ; +#71775 = ORIENTED_EDGE ( 'NONE', *, *, #44341, .T. ) ; +#71774 = CARTESIAN_POINT ( 'NONE', ( 1.621966450038314600E-013, 87.22261628933252100, -28.70555803802997700 ) ) ; +#71776 = CARTESIAN_POINT ( 'NONE', ( -15.05231272353723600, 75.84128927986392900, -28.70545447299020500 ) ) ; +#71777 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 6.166666666666678500, -12.20555803803000000 ) ) ; +#71778 = ORIENTED_EDGE ( 'NONE', *, *, #31212, .F. ) ; +#71779 = FACE_OUTER_BOUND ( 'NONE', #72974, .T. ) ; +#71780 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 40.50000000000000000, 2.454695999814380200 ) ) ; +#71781 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995600, 39.16749699759768800, -28.20555803802995200 ) ) ; +#71782 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71783 = ORIENTED_EDGE ( 'NONE', *, *, #47924, .F. ) ; +#71784 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725212400, 14.04999999999952800, -28.20555803803025800 ) ) ; +#71785 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 5.500000000000016900, 4.650848422521012700 ) ) ; +#71786 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390328900, 71.46283204837320100, -28.48697406221674600 ) ) ; +#71787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71788 = EDGE_CURVE ( 'NONE', #19369, #70072, #69346, .T. ) ; +#71789 = CONICAL_SURFACE ( 'NONE', #20835, 10.00000000000009400, 0.7853981633974447300 ) ; +#71790 = ORIENTED_EDGE ( 'NONE', *, *, #66325, .F. ) ; +#71791 = CARTESIAN_POINT ( 'NONE', ( 5.749712055412007100, 44.44999999999999600, 4.815759355240902400 ) ) ; +#71792 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466681200, 41.79130857014967400, -28.37223374938523100 ) ) ; +#71793 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 42.83333333333333600, -4.152999154772353500 ) ) ; +#71794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#71795 = CARTESIAN_POINT ( 'NONE', ( -3.360598542614455100, 18.16749699759768800, -28.25434854811486900 ) ) ; +#71796 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537168400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#71797 = VERTEX_POINT ( 'NONE', #56609 ) ; +#71798 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71800 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71802 = CIRCLE ( 'NONE', #79704, 10.00000000000009200 ) ; +#71803 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78249, #34742, #47198, #9970 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676326193402425700 ), + .UNSPECIFIED. ) ; +#71804 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#71805 = CIRCLE ( 'NONE', #69915, 10.00000000000009400 ) ; +#71806 = ORIENTED_EDGE ( 'NONE', *, *, #14714, .F. ) ; +#71808 = EDGE_CURVE ( 'NONE', #79766, #30374, #23640, .T. ) ; +#71807 = VERTEX_POINT ( 'NONE', #62895 ) ; +#71809 = CARTESIAN_POINT ( 'NONE', ( 4.720766503058122500, 70.09951448976266900, -28.63282631410032100 ) ) ; +#71810 = VERTEX_POINT ( 'NONE', #7098 ) ; +#71811 = ORIENTED_EDGE ( 'NONE', *, *, #23703, .T. ) ; +#71812 = EDGE_CURVE ( 'NONE', #59888, #862, #49381, .T. ) ; +#71813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71814 = ORIENTED_EDGE ( 'NONE', *, *, #70226, .F. ) ; +#71815 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#71816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71817 = AXIS2_PLACEMENT_3D ( 'NONE', #18492, #30747, #80511 ) ; +#71818 = ORIENTED_EDGE ( 'NONE', *, *, #67483, .T. ) ; +#71819 = EDGE_CURVE ( 'NONE', #18523, #18756, #34983, .T. ) ; +#71820 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71821 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75291, #31785, #44231, #7011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697645093200E-007, 0.0008724363063899891000 ), + .UNSPECIFIED. ) ; +#71822 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71823 = CARTESIAN_POINT ( 'NONE', ( -17.30192380577545200, 89.84168709918189700, -28.43753768099855600 ) ) ; +#71824 = EDGE_CURVE ( 'NONE', #1540, #2862, #40155, .T. ) ; +#71825 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71826 = CIRCLE ( 'NONE', #55337, 10.00000000000009400 ) ; +#71827 = AXIS2_PLACEMENT_3D ( 'NONE', #76805, #39540, #2262 ) ; +#71828 = ORIENTED_EDGE ( 'NONE', *, *, #68246, .F. ) ; +#71829 = ORIENTED_EDGE ( 'NONE', *, *, #58822, .T. ) ; +#71830 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 46.33333333333333600, -5.205558038030008400 ) ) ; +#71831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71832 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71833 = ORIENTED_EDGE ( 'NONE', *, *, #35762, .T. ) ; +#71834 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73088, #29586, #23574, #67086 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823696547178600E-007, 0.0008724363063898905400 ), + .UNSPECIFIED. ) ; +#71835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71836 = CIRCLE ( 'NONE', #27704, 10.00000000000009400 ) ; +#71837 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136824200, 59.92958814301756800, -28.27321389036147200 ) ) ; +#71838 = ADVANCED_FACE ( 'NONE', ( #56711 ), #34328, .T. ) ; +#71839 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 59.98922577050341000, -28.37255355648634500 ) ) ; +#71840 = AXIS2_PLACEMENT_3D ( 'NONE', #46130, #52382, #45866 ) ; +#71841 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71842 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987500, 51.65075715145281500, -28.20555803802997700 ) ) ; +#71843 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36485, #80293, #12031, #55532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002063080595560765800 ), + .UNSPECIFIED. ) ; +#71846 = ORIENTED_EDGE ( 'NONE', *, *, #16932, .T. ) ; +#71845 = EDGE_CURVE ( 'NONE', #40087, #49174, #20502, .T. ) ; +#71847 = EDGE_CURVE ( 'NONE', #55080, #54615, #19733, .T. ) ; +#71848 = AXIS2_PLACEMENT_3D ( 'NONE', #56966, #25978, #69460 ) ; +#71849 = CARTESIAN_POINT ( 'NONE', ( 16.87500833472982400, 90.01262610361058600, -28.29936525552496100 ) ) ; +#71850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71851 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 52.66666666666667100, 5.722645192245505700 ) ) ; +#71852 = CONICAL_SURFACE ( 'NONE', #14561, 10.00000000000009400, 0.7853981633974447300 ) ; +#71853 = ORIENTED_EDGE ( 'NONE', *, *, #9383, .T. ) ; +#71854 = ADVANCED_FACE ( 'NONE', ( #52794 ), #65489, .F. ) ; +#71855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71856 = ORIENTED_EDGE ( 'NONE', *, *, #37957, .T. ) ; +#71857 = ORIENTED_EDGE ( 'NONE', *, *, #23317, .F. ) ; +#71858 = ADVANCED_FACE ( 'NONE', ( #17786 ), #32359, .F. ) ; +#71859 = CARTESIAN_POINT ( 'NONE', ( -10.97684032349357100, 31.01912043132477600, -28.30223257055573800 ) ) ; +#71860 = EDGE_CURVE ( 'NONE', #46326, #43518, #48876, .T. ) ; +#71861 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 11.50000000000002300, 4.650848422521016300 ) ) ; +#71862 = CARTESIAN_POINT ( 'NONE', ( 22.75901710612591700, 95.47950799507110300, -25.01411917527164900 ) ) ; +#71863 = CIRCLE ( 'NONE', #54494, 10.50000000000009600 ) ; +#71864 = AXIS2_PLACEMENT_3D ( 'NONE', #74861, #37556, #317 ) ; +#71865 = AXIS2_PLACEMENT_3D ( 'NONE', #53732, #3958, #10231 ) ; +#71866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71867 = ADVANCED_FACE ( 'NONE', ( #7053 ), #63536, .F. ) ; +#71868 = VECTOR ( 'NONE', #9787, 1000.000000000000000 ) ; +#71869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71870 = EDGE_LOOP ( 'NONE', ( #34629, #62278, #63251 ) ) ; +#71871 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71872 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#71873 = ORIENTED_EDGE ( 'NONE', *, *, #5421, .T. ) ; +#71874 = ORIENTED_EDGE ( 'NONE', *, *, #27640, .T. ) ; +#71875 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 14.83333333333333200, -6.205558038030004800 ) ) ; +#71876 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#71877 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12471, #55965, #18720, #62250 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185241100, 0.001517199873936355200 ), + .UNSPECIFIED. ) ; +#71878 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571427600, 63.67681279774500800, -28.70555803802997700 ) ) ; +#71879 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155495500, 66.13383585008156700, -28.37247596307075900 ) ) ; +#71880 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 55.00000000000000700, -9.205558038030005700 ) ) ; +#71881 = FACE_OUTER_BOUND ( 'NONE', #52461, .T. ) ; +#71882 = FACE_OUTER_BOUND ( 'NONE', #3899, .T. ) ; +#71883 = AXIS2_PLACEMENT_3D ( 'NONE', #34635, #78143, #40868 ) ; +#71884 = ORIENTED_EDGE ( 'NONE', *, *, #28983, .F. ) ; +#71885 = CARTESIAN_POINT ( 'NONE', ( 2.844497922849334800, 39.27966528189954000, -28.30868034705250100 ) ) ; +#71886 = ORIENTED_EDGE ( 'NONE', *, *, #28346, .T. ) ; +#71887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71888 = EDGE_LOOP ( 'NONE', ( #16101, #273, #9957, #70690 ) ) ; +#71889 = ORIENTED_EDGE ( 'NONE', *, *, #47924, .T. ) ; +#71890 = ORIENTED_EDGE ( 'NONE', *, *, #63816, .T. ) ; +#71891 = ORIENTED_EDGE ( 'NONE', *, *, #12357, .F. ) ; +#71892 = CARTESIAN_POINT ( 'NONE', ( -4.906733260263262500, 45.54999999999997600, -28.70555803802996700 ) ) ; +#71893 = EDGE_LOOP ( 'NONE', ( #51704, #23234, #67937, #5284, #43158 ) ) ; +#71894 = ORIENTED_EDGE ( 'NONE', *, *, #29096, .T. ) ; +#71895 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71896 = AXIS2_PLACEMENT_3D ( 'NONE', #23295, #66823, #29585 ) ; +#71897 = ORIENTED_EDGE ( 'NONE', *, *, #73493, .T. ) ; +#71898 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71899 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71900 = EDGE_CURVE ( 'NONE', #19525, #49658, #15818, .T. ) ; +#71901 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71902 = ORIENTED_EDGE ( 'NONE', *, *, #79549, .T. ) ; +#71903 = FACE_OUTER_BOUND ( 'NONE', #78209, .T. ) ; +#71904 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#71905 = VERTEX_POINT ( 'NONE', #63432 ) ; +#71906 = AXIS2_PLACEMENT_3D ( 'NONE', #55558, #30833, #12064 ) ; +#71907 = ORIENTED_EDGE ( 'NONE', *, *, #47465, .F. ) ; +#71908 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567223800, 49.85339758437807900, -28.20555803802996700 ) ) ; +#71909 = ORIENTED_EDGE ( 'NONE', *, *, #20316, .T. ) ; +#71910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71911 = ORIENTED_EDGE ( 'NONE', *, *, #2185, .F. ) ; +#71912 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#71913 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.13176086632794100, -28.70555803802994200 ) ) ; +#71914 = CONICAL_SURFACE ( 'NONE', #21384, 10.00000000000009600, 0.7853981633974447300 ) ; +#71915 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71916 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489667300, 9.940690926013793700, -28.35186440610855000 ) ) ; +#71917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71918 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71919 = ORIENTED_EDGE ( 'NONE', *, *, #30961, .T. ) ; +#71920 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428127100, 61.52858243452097000, -28.70555803803030800 ) ) ; +#71921 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77913, #27592, #40330, #3059 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220846454663421400E-007, 0.0004559726636569765100 ), + .UNSPECIFIED. ) ; +#71922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71923 = EDGE_LOOP ( 'NONE', ( #21283, #50355, #23318 ) ) ; +#71924 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#71925 = CARTESIAN_POINT ( 'NONE', ( -24.94050077549419700, 97.38502122269369500, -19.81723910052642900 ) ) ; +#71926 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188000700, 41.06914835874665900, -28.45573375118225800 ) ) ; +#71927 = EDGE_CURVE ( 'NONE', #64739, #59803, #6048, .T. ) ; +#71928 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 71.43650294695130800, -28.30782889147482400 ) ) ; +#71929 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71930 = LINE ( 'NONE', #30633, #57311 ) ; +#71931 = ORIENTED_EDGE ( 'NONE', *, *, #43401, .T. ) ; +#71933 = EDGE_CURVE ( 'NONE', #3342, #27705, #3152, .T. ) ; +#71932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32503, #20020, #38721, #1489 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002968006367409886100, 0.0005556746457764233600 ), + .UNSPECIFIED. ) ; +#71934 = VERTEX_POINT ( 'NONE', #2176 ) ; +#71935 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547800, 80.16054007504448000, -28.34042301926906000 ) ) ; +#71936 = VERTEX_POINT ( 'NONE', #58216 ) ; +#71937 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71938 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 20.43250300240229200, -28.20555803802995200 ) ) ; +#71939 = CARTESIAN_POINT ( 'NONE', ( 9.832817182603626800, 51.03343807497606800, -28.37235298663067300 ) ) ; +#71940 = CARTESIAN_POINT ( 'NONE', ( -3.926508157484629900, 60.22161678501182500, -28.29547179040443400 ) ) ; +#71941 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#71942 = EDGE_CURVE ( 'NONE', #66575, #32367, #72393, .T. ) ; +#71943 = EDGE_CURVE ( 'NONE', #25973, #53679, #67412, .T. ) ; +#71944 = AXIS2_PLACEMENT_3D ( 'NONE', #67136, #29915, #73397 ) ; +#71945 = FACE_OUTER_BOUND ( 'NONE', #13035, .T. ) ; +#71946 = CONICAL_SURFACE ( 'NONE', #67680, 10.00000000000009200, 0.7853981633974447300 ) ; +#71947 = ORIENTED_EDGE ( 'NONE', *, *, #78512, .T. ) ; +#71948 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#71949 = ORIENTED_EDGE ( 'NONE', *, *, #38734, .T. ) ; +#71950 = ADVANCED_FACE ( 'NONE', ( #50819 ), #44963, .T. ) ; +#71951 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 61.00000000000001400, -1.205558038030005300 ) ) ; +#71952 = VERTEX_POINT ( 'NONE', #58497 ) ; +#71953 = AXIS2_PLACEMENT_3D ( 'NONE', #57331, #63614, #13838 ) ; +#71954 = EDGE_CURVE ( 'NONE', #29208, #54772, #80059, .T. ) ; +#71955 = EDGE_CURVE ( 'NONE', #505, #67901, #57898, .T. ) ; +#71956 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#71957 = EDGE_CURVE ( 'NONE', #48875, #60356, #43411, .T. ) ; +#71958 = ADVANCED_FACE ( 'NONE', ( #46924 ), #76133, .T. ) ; +#71959 = FACE_OUTER_BOUND ( 'NONE', #6433, .T. ) ; +#71960 = ORIENTED_EDGE ( 'NONE', *, *, #46967, .T. ) ; +#71961 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71962 = CIRCLE ( 'NONE', #76586, 10.00000000000009200 ) ; +#71963 = ORIENTED_EDGE ( 'NONE', *, *, #35753, .T. ) ; +#71964 = EDGE_LOOP ( 'NONE', ( #3161, #57509, #74097, #1706 ) ) ; +#71965 = AXIS2_PLACEMENT_3D ( 'NONE', #52126, #14904, #58420 ) ; +#71966 = ORIENTED_EDGE ( 'NONE', *, *, #20251, .T. ) ; +#71967 = CARTESIAN_POINT ( 'NONE', ( -2.813460021729408600, 6.877501000801044200, -28.20555803803009500 ) ) ; +#71968 = FACE_OUTER_BOUND ( 'NONE', #56411, .T. ) ; +#71969 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 55.16666666666667900, 0.9380355014189848400 ) ) ; +#71970 = ORIENTED_EDGE ( 'NONE', *, *, #55444, .T. ) ; +#71971 = ORIENTED_EDGE ( 'NONE', *, *, #45806, .T. ) ; +#71972 = ORIENTED_EDGE ( 'NONE', *, *, #69073, .F. ) ; +#71973 = ORIENTED_EDGE ( 'NONE', *, *, #20582, .T. ) ; +#71974 = PLANE ( 'NONE', #14207 ) ; +#71975 = ORIENTED_EDGE ( 'NONE', *, *, #25475, .T. ) ; +#71976 = EDGE_CURVE ( 'NONE', #32387, #2740, #29029, .T. ) ; +#71977 = AXIS2_PLACEMENT_3D ( 'NONE', #72420, #23168, #54150 ) ; +#71978 = AXIS2_PLACEMENT_3D ( 'NONE', #36756, #30548, #74053 ) ; +#71979 = ORIENTED_EDGE ( 'NONE', *, *, #58793, .F. ) ; +#71980 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390573200, 60.13716795162658000, -28.48697406221667800 ) ) ; +#71981 = ADVANCED_FACE ( 'NONE', ( #61581 ), #43038, .T. ) ; +#71982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #919, #25713, #38426, #1187 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880082970393800E-007, 0.0003101809493108492900 ), + .UNSPECIFIED. ) ; +#71983 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#71984 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71986 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 32.33333333333333600, 4.294441961970000500 ) ) ; +#71987 = CONICAL_SURFACE ( 'NONE', #78740, 10.50000000000009600, 0.7853981633974500600 ) ; +#71988 = ORIENTED_EDGE ( 'NONE', *, *, #5183, .F. ) ; +#71989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#71990 = ORIENTED_EDGE ( 'NONE', *, *, #16305, .T. ) ; +#71991 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#71992 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .F. ) ; +#71993 = ORIENTED_EDGE ( 'NONE', *, *, #15927, .T. ) ; +#71994 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274328800, 51.29377171558717700, -28.24172590004390000 ) ) ; +#71995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71996 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819169800, 69.94924284854653300, -28.20555803803030800 ) ) ; +#71997 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195939300, 57.94142842854297700, -28.37229765499282100 ) ) ; +#71998 = CIRCLE ( 'NONE', #21850, 10.50000000000009800 ) ; +#71999 = ORIENTED_EDGE ( 'NONE', *, *, #73446, .F. ) ; +#72000 = CARTESIAN_POINT ( 'NONE', ( -17.30183166260302100, 71.75837447661945100, -28.43755849160216100 ) ) ; +#72001 = ORIENTED_EDGE ( 'NONE', *, *, #57612, .F. ) ; +#72002 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72003 = AXIS2_PLACEMENT_3D ( 'NONE', #633, #50115, #44120 ) ; +#72004 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719597300, 36.94142842854297000, -28.37229765499278100 ) ) ; +#72005 = CARTESIAN_POINT ( 'NONE', ( -11.56182508409087400, 9.983857102125124800, -28.57719681746175400 ) ) ; +#72006 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 66.83333333333334300, -6.205558038030004800 ) ) ; +#72007 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72008 = CONICAL_SURFACE ( 'NONE', #19694, 10.50000000000009600, 0.7853981633974518300 ) ; +#72009 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72010 = ORIENTED_EDGE ( 'NONE', *, *, #28864, .T. ) ; +#72011 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72012 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3353, #27892, #52858, #46855 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698665974400E-007, 0.0008724363063899832400 ), + .UNSPECIFIED. ) ; +#72013 = ORIENTED_EDGE ( 'NONE', *, *, #8376, .F. ) ; +#72014 = ORIENTED_EDGE ( 'NONE', *, *, #61564, .F. ) ; +#72015 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 30.74660241562189700, -28.20555803802995200 ) ) ; +#72016 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#72017 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783879900, 18.16749699759768800, -28.23966044827351100 ) ) ; +#72018 = CARTESIAN_POINT ( 'NONE', ( -10.46450022409772300, 9.204283415895467600, -28.67591357691970800 ) ) ; +#72020 = AXIS2_PLACEMENT_3D ( 'NONE', #41390, #4140, #47623 ) ; +#72019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25951, #69434, #75684, #38402 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736409166400E-007, 0.0009376786059871946200 ), + .UNSPECIFIED. ) ; +#72021 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#72022 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72023 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019277900, 84.80000000000008200, -28.70555803802997700 ) ) ; +#72024 = EDGE_CURVE ( 'NONE', #72320, #62452, #13880, .T. ) ; +#72025 = PLANE ( 'NONE', #9648 ) ; +#72026 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474191500, 10.36172549728281200, -28.47230003642276600 ) ) ; +#72027 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174866200, 80.16054007504448000, -28.34042301926892500 ) ) ; +#72028 = AXIS2_PLACEMENT_3D ( 'NONE', #11609, #55101, #17861 ) ; +#72029 = FACE_OUTER_BOUND ( 'NONE', #47645, .T. ) ; +#72030 = CONICAL_SURFACE ( 'NONE', #47268, 10.00000000000009400, 0.7853981633974447300 ) ; +#72031 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23204, #60483, #41950, #4690 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001179148174662938500 ), + .UNSPECIFIED. ) ; +#72032 = ORIENTED_EDGE ( 'NONE', *, *, #64804, .F. ) ; +#72033 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488291200, 81.99560977511637800, -28.70555803803014400 ) ) ; +#72034 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950487200, 31.40771342879313700, -28.53891855579976400 ) ) ; +#72035 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034405500, 38.92298334620738800, -28.20555803802996000 ) ) ; +#72036 = VERTEX_POINT ( 'NONE', #77790 ) ; +#72037 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#72038 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265453400, 71.32559822014134500, -28.29986836858039800 ) ) ; +#72039 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72040 = ADVANCED_FACE ( 'NONE', ( #78099 ), #74225, .T. ) ; +#72041 = FACE_OUTER_BOUND ( 'NONE', #78038, .T. ) ; +#72042 = ORIENTED_EDGE ( 'NONE', *, *, #65299, .F. ) ; +#72043 = FACE_OUTER_BOUND ( 'NONE', #55915, .T. ) ; +#72044 = ORIENTED_EDGE ( 'NONE', *, *, #39419, .T. ) ; +#72045 = EDGE_CURVE ( 'NONE', #71627, #18262, #14511, .T. ) ; +#72046 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285709100, 83.67681279774501500, -28.70555803802997700 ) ) ; +#72047 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 4.000000000000006200, 9.794441961969996100 ) ) ; +#72048 = FACE_OUTER_BOUND ( 'NONE', #48395, .T. ) ; +#72049 = EDGE_CURVE ( 'NONE', #14498, #70590, #9965, .T. ) ; +#72050 = VERTEX_POINT ( 'NONE', #3517 ) ; +#72051 = ORIENTED_EDGE ( 'NONE', *, *, #47353, .T. ) ; +#72052 = EDGE_LOOP ( 'NONE', ( #75513, #63796, #58991 ) ) ; +#72053 = EDGE_LOOP ( 'NONE', ( #66667, #52824, #69320 ) ) ; +#72055 = VERTEX_POINT ( 'NONE', #59586 ) ; +#72054 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 81.52858243452104100, -28.70555803802997700 ) ) ; +#72056 = EDGE_LOOP ( 'NONE', ( #66330, #44376, #63633 ) ) ; +#72057 = ADVANCED_FACE ( 'NONE', ( #26539 ), #24569, .F. ) ; +#72058 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 38.33333333333333600, -5.535685056952199400 ) ) ; +#72059 = CARTESIAN_POINT ( 'NONE', ( -2.487278546917064800, 71.47860033657563900, -28.56001054660900000 ) ) ; +#72060 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72061 = EDGE_CURVE ( 'NONE', #46519, #4187, #41107, .T. ) ; +#72062 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80567, #37026, #18550, #62084 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468211199300, 0.001517199873936352000 ), + .UNSPECIFIED. ) ; +#72063 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#72064 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 3.333333333333341000, -8.133761268305512700 ) ) ; +#72065 = EDGE_CURVE ( 'NONE', #61855, #44696, #34, .T. ) ; +#72067 = ORIENTED_EDGE ( 'NONE', *, *, #17603, .F. ) ; +#72066 = AXIS2_PLACEMENT_3D ( 'NONE', #5018, #48501, #11295 ) ; +#72068 = FACE_OUTER_BOUND ( 'NONE', #53183, .T. ) ; +#72069 = ORIENTED_EDGE ( 'NONE', *, *, #23571, .T. ) ; +#72070 = ORIENTED_EDGE ( 'NONE', *, *, #53458, .T. ) ; +#72071 = EDGE_CURVE ( 'NONE', #28695, #3902, #30444, .T. ) ; +#72072 = CARTESIAN_POINT ( 'NONE', ( 9.131208928268996800, 44.44999999999996700, -0.7112233018759467300 ) ) ; +#72073 = ORIENTED_EDGE ( 'NONE', *, *, #4142, .F. ) ; +#72074 = CARTESIAN_POINT ( 'NONE', ( -4.502075021551476700, 50.60145251508603800, -28.70555803802997700 ) ) ; +#72075 = ORIENTED_EDGE ( 'NONE', *, *, #15461, .T. ) ; +#72076 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 40.66666666666667900, 4.294441961969993400 ) ) ; +#72077 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651226400, 81.99560977511660600, -28.70555803803014400 ) ) ; +#72078 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510618300, 9.940690926013793700, -28.35186440610865300 ) ) ; +#72079 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825121300, 51.43945992495515900, -28.34042301926892500 ) ) ; +#72080 = CIRCLE ( 'NONE', #12897, 9.500000000000097700 ) ; +#72081 = AXIS2_PLACEMENT_3D ( 'NONE', #756, #44243, #7026 ) ; +#72082 = ORIENTED_EDGE ( 'NONE', *, *, #48220, .T. ) ; +#72083 = EDGE_CURVE ( 'NONE', #51761, #16391, #66391, .T. ) ; +#72084 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72085 = EDGE_CURVE ( 'NONE', #1580, #8615, #57640, .T. ) ; +#72086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72087 = EDGE_CURVE ( 'NONE', #66701, #49544, #59623, .T. ) ; +#72089 = ORIENTED_EDGE ( 'NONE', *, *, #35256, .F. ) ; +#72088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72090 = ADVANCED_FACE ( 'NONE', ( #28511 ), #6072, .F. ) ; +#72091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72092 = AXIS2_PLACEMENT_3D ( 'NONE', #78466, #53682, #9905 ) ; +#72093 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#72094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72095 = CIRCLE ( 'NONE', #14451, 9.500000000000101300 ) ; +#72096 = VERTEX_POINT ( 'NONE', #54102 ) ; +#72097 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72098 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#72099 = ORIENTED_EDGE ( 'NONE', *, *, #4046, .T. ) ; +#72100 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609669700, 61.46283204837337200, -28.48697406221659300 ) ) ; +#72101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72102 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72103 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72104 = AXIS2_PLACEMENT_3D ( 'NONE', #44472, #7239, #50742 ) ; +#72105 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72106 = AXIS2_PLACEMENT_3D ( 'NONE', #1116, #13683, #57176 ) ; +#72107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72108 = CARTESIAN_POINT ( 'NONE', ( -17.14620600645635700, 59.08128969594170600, -28.47270666107741000 ) ) ; +#72109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72110 = FACE_OUTER_BOUND ( 'NONE', #230, .T. ) ; +#72111 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 44.16666666666668600, 0.9380355014189834000 ) ) ; +#72112 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 11.47376207875059300, -28.70555803802994200 ) ) ; +#72113 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528187700, 28.63131911501876900, -28.51286550264507700 ) ) ; +#72114 = ORIENTED_EDGE ( 'NONE', *, *, #29091, .F. ) ; +#72115 = ORIENTED_EDGE ( 'NONE', *, *, #44325, .F. ) ; +#72116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72117 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32237, #57253, #76016, #38719 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207933849600E-007, 0.0008724366121409721100 ), + .UNSPECIFIED. ) ; +#72118 = ORIENTED_EDGE ( 'NONE', *, *, #36838, .F. ) ; +#72119 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72120 = AXIS2_PLACEMENT_3D ( 'NONE', #45057, #7829, #51322 ) ; +#72121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72122 = FACE_OUTER_BOUND ( 'NONE', #1915, .T. ) ; +#72123 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72124 = ORIENTED_EDGE ( 'NONE', *, *, #66840, .T. ) ; +#72125 = ORIENTED_EDGE ( 'NONE', *, *, #51057, .F. ) ; +#72126 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 54.83333333333333600, -9.205558038030003900 ) ) ; +#72127 = EDGE_CURVE ( 'NONE', #21273, #28771, #51867, .T. ) ; +#72128 = FACE_OUTER_BOUND ( 'NONE', #10631, .T. ) ; +#72129 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#72130 = VERTEX_POINT ( 'NONE', #66632 ) ; +#72131 = AXIS2_PLACEMENT_3D ( 'NONE', #52423, #39946, #27190 ) ; +#72132 = ORIENTED_EDGE ( 'NONE', *, *, #70656, .T. ) ; +#72133 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#72134 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .F. ) ; +#72135 = ORIENTED_EDGE ( 'NONE', *, *, #48450, .T. ) ; +#72136 = ORIENTED_EDGE ( 'NONE', *, *, #70162, .T. ) ; +#72137 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.59999999999999400, -18.70555803803001300 ) ) ; +#72138 = CARTESIAN_POINT ( 'NONE', ( 10.24306493325791900, 71.43482203710615900, -28.29548531138987900 ) ) ; +#72139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72140 = ADVANCED_FACE ( 'NONE', ( #39123 ), #53742, .T. ) ; +#72141 = CONICAL_SURFACE ( 'NONE', #15573, 10.50000000000009400, 0.7853981633974500600 ) ; +#72142 = AXIS2_PLACEMENT_3D ( 'NONE', #74585, #24810, #31071 ) ; +#72143 = ORIENTED_EDGE ( 'NONE', *, *, #6866, .T. ) ; +#72144 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72145 = EDGE_LOOP ( 'NONE', ( #33061, #27940, #80005, #80610 ) ) ; +#72146 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714215400, 77.92318720225458200, -28.70555803803030800 ) ) ; +#72147 = ORIENTED_EDGE ( 'NONE', *, *, #53570, .F. ) ; +#72148 = ORIENTED_EDGE ( 'NONE', *, *, #44357, .T. ) ; +#72149 = VERTEX_POINT ( 'NONE', #17130 ) ; +#72150 = CYLINDRICAL_SURFACE ( 'NONE', #13386, 10.00000000000000000 ) ; +#72151 = ADVANCED_FACE ( 'NONE', ( #22618 ), #20664, .F. ) ; +#72152 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 12.66666666666667100, 3.124568980892192800 ) ) ; +#72153 = CARTESIAN_POINT ( 'NONE', ( -3.431707303488259300, 71.99560977511657700, -28.70555803802997700 ) ) ; +#72154 = ORIENTED_EDGE ( 'NONE', *, *, #12341, .T. ) ; +#72155 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998900, 61.35277818615431800, -28.70555803802999500 ) ) ; +#72156 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41795, #4800, #54590, #17329 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453810912400, 0.0005317208426588627800 ), + .UNSPECIFIED. ) ; +#72157 = CARTESIAN_POINT ( 'NONE', ( -2.794151403462660400, 90.20590598242367300, -28.39369363572358700 ) ) ; +#72158 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72159 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 52.83333333333334300, 6.794441961969992500 ) ) ; +#72160 = VERTEX_POINT ( 'NONE', #66905 ) ; +#72161 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72163 = EDGE_CURVE ( 'NONE', #43689, #44558, #37175, .T. ) ; +#72164 = FACE_OUTER_BOUND ( 'NONE', #64362, .T. ) ; +#72166 = EDGE_LOOP ( 'NONE', ( #61410, #64949, #30234, #39205 ) ) ; +#72165 = ADVANCED_FACE ( 'NONE', ( #7994 ), #48091, .T. ) ; +#72167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72074, #28572, #3755, #47256 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.843485555230255000E-007, 0.0009605145132142479900 ), + .UNSPECIFIED. ) ; +#72168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72169 = EDGE_CURVE ( 'NONE', #25149, #11554, #72273, .T. ) ; +#72170 = CARTESIAN_POINT ( 'NONE', ( -16.81107998338539000, 28.49322649091128300, -28.30799595738859500 ) ) ; +#72171 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8216, #1969, #8487, #51987, #14773, #58286 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001929763249978164600, 0.003859526499956329200 ), + .UNSPECIFIED. ) ; +#72172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72173 = CARTESIAN_POINT ( 'NONE', ( -2.653846153846553900, 90.79999999999982700, -28.55171188418368200 ) ) ; +#72174 = EDGE_CURVE ( 'NONE', #36217, #51376, #37415, .T. ) ; +#72175 = ADVANCED_FACE ( 'NONE', ( #55680 ), #18711, .T. ) ; +#72176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72177 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24818, #5514, #74596, #37288 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210956600, 0.001517199873936108900 ), + .UNSPECIFIED. ) ; +#72178 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841392000, 18.16349705304866200, -28.30782889147480200 ) ) ; +#72179 = EDGE_CURVE ( 'NONE', #4704, #48654, #22992, .T. ) ; +#72180 = EDGE_CURVE ( 'NONE', #30013, #28981, #8491, .T. ) ; +#72181 = CARTESIAN_POINT ( 'NONE', ( 9.989537268537338500, 61.25732391202388500, -28.20555803803014400 ) ) ; +#72182 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 57.22261628933269200, -28.70555803802997700 ) ) ; +#72183 = ORIENTED_EDGE ( 'NONE', *, *, #3023, .T. ) ; +#72184 = CARTESIAN_POINT ( 'NONE', ( 2.343046065459495800, 72.51973550835650400, -28.70555803803009800 ) ) ; +#72185 = ORIENTED_EDGE ( 'NONE', *, *, #60278, .F. ) ; +#72186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72187 = EDGE_LOOP ( 'NONE', ( #72073, #66887, #55528, #68900 ) ) ; +#72188 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844486800, 85.79999999999998300, -28.20555803802997700 ) ) ; +#72189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72191 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146265600, 61.25732391202370800, -28.20555803803030800 ) ) ; +#72192 = EDGE_CURVE ( 'NONE', #29818, #14786, #4106, .T. ) ; +#72193 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 44.44999999999999600, -1.205558038030005700 ) ) ; +#72194 = EDGE_CURVE ( 'NONE', #51153, #62691, #11932, .T. ) ; +#72195 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72196 = EDGE_CURVE ( 'NONE', #36626, #5281, #74858, .T. ) ; +#72197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72198 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72199 = CONICAL_SURFACE ( 'NONE', #1728, 10.00000000000009400, 0.7853981633974447300 ) ; +#72200 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72201 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ; +#72202 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72203 = EDGE_LOOP ( 'NONE', ( #79020, #35181, #23177, #78265 ) ) ; +#72204 = AXIS2_PLACEMENT_3D ( 'NONE', #19970, #63498, #26246 ) ; +#72205 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857176300, 12.17681279774499700, -28.70555803802994200 ) ) ; +#72206 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#72207 = ORIENTED_EDGE ( 'NONE', *, *, #67887, .T. ) ; +#72208 = FACE_OUTER_BOUND ( 'NONE', #6681, .T. ) ; +#72209 = CARTESIAN_POINT ( 'NONE', ( -16.53329117585111900, 92.25255704737782000, -28.58908508234382500 ) ) ; +#72210 = ORIENTED_EDGE ( 'NONE', *, *, #12612, .T. ) ; +#72211 = ORIENTED_EDGE ( 'NONE', *, *, #11272, .T. ) ; +#72212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40765, #3490, #22280, #65814 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716339000, 0.004080294652942959200 ), + .UNSPECIFIED. ) ; +#72213 = EDGE_LOOP ( 'NONE', ( #58894, #63725, #15378, #7795, #68669 ) ) ; +#72214 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552800, 61.49769010897077900, -28.61774594594320900 ) ) ; +#72215 = AXIS2_PLACEMENT_3D ( 'NONE', #41130, #3847, #47345 ) ; +#72216 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006700, 49.31066373133501200, -28.53923937255171900 ) ) ; +#72217 = AXIS2_PLACEMENT_3D ( 'NONE', #51324, #63906, #20379 ) ; +#72218 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#72219 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 69.77559325427184000, -28.45987523529581900 ) ) ; +#72220 = AXIS2_PLACEMENT_3D ( 'NONE', #2716, #46232, #8968 ) ; +#72221 = CIRCLE ( 'NONE', #78661, 10.00000000000009200 ) ; +#72222 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30441, #55149, #80191, #42906 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287064110800E-007, 0.0002670038068533716900 ), + .UNSPECIFIED. ) ; +#72223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72224 = ORIENTED_EDGE ( 'NONE', *, *, #6916, .T. ) ; +#72225 = CIRCLE ( 'NONE', #49372, 10.50000000000009800 ) ; +#72226 = VERTEX_POINT ( 'NONE', #42651 ) ; +#72227 = ORIENTED_EDGE ( 'NONE', *, *, #36647, .T. ) ; +#72228 = ORIENTED_EDGE ( 'NONE', *, *, #11985, .F. ) ; +#72229 = ORIENTED_EDGE ( 'NONE', *, *, #80779, .T. ) ; +#72230 = ORIENTED_EDGE ( 'NONE', *, *, #44701, .F. ) ; +#72231 = CONICAL_SURFACE ( 'NONE', #5503, 10.50000000000009600, 0.7853981633974500600 ) ; +#72232 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 58.83333333333332100, -3.349151577478984600 ) ) ; +#72233 = AXIS2_PLACEMENT_3D ( 'NONE', #6663, #50157, #12943 ) ; +#72234 = EDGE_CURVE ( 'NONE', #33691, #22165, #60415, .T. ) ; +#72235 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72237 = ADVANCED_FACE ( 'NONE', ( #51760 ), #33297, .F. ) ; +#72238 = ORIENTED_EDGE ( 'NONE', *, *, #64456, .F. ) ; +#72239 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552400, 81.49769010897078700, -28.61774594594320900 ) ) ; +#72240 = FACE_OUTER_BOUND ( 'NONE', #3111, .T. ) ; +#72241 = EDGE_LOOP ( 'NONE', ( #46954, #8698, #38659, #26229 ) ) ; +#72243 = ORIENTED_EDGE ( 'NONE', *, *, #45948, .T. ) ; +#72242 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 19.90050506338822300, -28.70555803802995200 ) ) ; +#72244 = EDGE_CURVE ( 'NONE', #6854, #29839, #45885, .T. ) ; +#72245 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000012400, 53.00000000000001400, -1.205558038030006400 ) ) ; +#72246 = AXIS2_PLACEMENT_3D ( 'NONE', #12605, #18843, #49808 ) ; +#72247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72248 = ADVANCED_FACE ( 'NONE', ( #35282 ), #49424, .T. ) ; +#72249 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72250 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 30.16666666666668200, -4.152999154772358800 ) ) ; +#72251 = CARTESIAN_POINT ( 'NONE', ( 10.36059854261447200, 49.66749699759768100, -28.25434854811490100 ) ) ; +#72252 = AXIS2_PLACEMENT_3D ( 'NONE', #46833, #9594, #53103 ) ; +#72253 = CARTESIAN_POINT ( 'NONE', ( -10.20794423950492400, 38.69228657120676500, -28.53891855579985300 ) ) ; +#72254 = PLANE ( 'NONE', #63035 ) ; +#72255 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.30277574221155800, -28.32715733700494500 ) ) ; +#72256 = ADVANCED_FACE ( 'NONE', ( #66410 ), #64478, .T. ) ; +#72257 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73431, #60933, #11427, #54915 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726972903600, 0.0008135742306946972500 ), + .UNSPECIFIED. ) ; +#72258 = ORIENTED_EDGE ( 'NONE', *, *, #49033, .F. ) ; +#72259 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654520200, 60.27440177985816000, -28.29986836858022100 ) ) ; +#72260 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#72261 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 80.16054007504463600, -28.34042301926880800 ) ) ; +#72263 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .F. ) ; +#72262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72264 = ADVANCED_FACE ( 'NONE', ( #16755 ), #62255, .T. ) ; +#72265 = CARTESIAN_POINT ( 'NONE', ( 10.27742216455569500, 79.72166103827331100, -28.53892303408230500 ) ) ; +#72266 = AXIS2_PLACEMENT_3D ( 'NONE', #33273, #76781, #39512 ) ; +#72267 = ADVANCED_FACE ( 'NONE', ( #70285 ), #14804, .T. ) ; +#72268 = CARTESIAN_POINT ( 'NONE', ( -8.851846210996297900, 55.79999999999999700, -28.37148172714570600 ) ) ; +#72269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50152, #6659, #56433, #19183 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.647940464546886600E-017, 0.001492013864175035700 ), + .UNSPECIFIED. ) ; +#72271 = FACE_OUTER_BOUND ( 'NONE', #422, .T. ) ; +#72272 = EDGE_LOOP ( 'NONE', ( #70225, #65100, #53730, #67127 ) ) ; +#72273 = CIRCLE ( 'NONE', #66022, 9.500000000000099500 ) ; +#72274 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857142900, 10.02858243452105700, -28.70555803802994200 ) ) ; +#72276 = EDGE_CURVE ( 'NONE', #60793, #53626, #31484, .T. ) ; +#72275 = ORIENTED_EDGE ( 'NONE', *, *, #52225, .F. ) ; +#72277 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 64.66666666666667100, 3.124568980892192800 ) ) ; +#72278 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#72279 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72280 = VERTEX_POINT ( 'NONE', #74759 ) ; +#72281 = CONICAL_SURFACE ( 'NONE', #19450, 10.50000000000009600, 0.7853981633974518300 ) ; +#72282 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72283 = ORIENTED_EDGE ( 'NONE', *, *, #18439, .F. ) ; +#72284 = EDGE_LOOP ( 'NONE', ( #61372, #18737, #5562, #223 ) ) ; +#72285 = PLANE ( 'NONE', #66239 ) ; +#72286 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100660400, 38.62363993080087000, -28.38670679782167700 ) ) ; +#72287 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819153800, 89.94924284854653300, -28.20555803803030800 ) ) ; +#72288 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049540500, 10.40771342879368300, -28.53891855580013700 ) ) ; +#72289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72290 = PLANE ( 'NONE', #66056 ) ; +#72291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4927, #23717, #42435, #5191 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785901388800E-007, 0.0007677775503743551200 ), + .UNSPECIFIED. ) ; +#72292 = FACE_OUTER_BOUND ( 'NONE', #27589, .T. ) ; +#72293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72294 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192782100, 84.79999999999978400, -28.70555803803030800 ) ) ; +#72295 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000047600, 80.36203212531219700, -28.38801640354842300 ) ) ; +#72296 = EDGE_LOOP ( 'NONE', ( #4499, #2856, #43039, #65625 ) ) ; +#72297 = CARTESIAN_POINT ( 'NONE', ( 2.621978672527905300, 18.13131911501857000, -28.51286550264531900 ) ) ; +#72298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72299 = EDGE_CURVE ( 'NONE', #48835, #37428, #17002, .T. ) ; +#72300 = FACE_OUTER_BOUND ( 'NONE', #2467, .T. ) ; +#72301 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#72302 = EDGE_LOOP ( 'NONE', ( #49677, #11476, #33210, #77726 ) ) ; +#72303 = ORIENTED_EDGE ( 'NONE', *, *, #38750, .F. ) ; +#72304 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473790800, 17.73827450271187100, -28.47230003642364700 ) ) ; +#72305 = VERTEX_POINT ( 'NONE', #49953 ) ; +#72306 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72307 = CONICAL_SURFACE ( 'NONE', #50160, 10.50000000000009600, 0.7853981633974482800 ) ; +#72308 = EDGE_LOOP ( 'NONE', ( #23938, #68119, #69998, #47087 ) ) ; +#72309 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428573000, 20.52858243452105600, -28.70555803802995200 ) ) ; +#72310 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72311 = FACE_OUTER_BOUND ( 'NONE', #14204, .T. ) ; +#72312 = AXIS2_PLACEMENT_3D ( 'NONE', #64673, #46116, #70893 ) ; +#72313 = CARTESIAN_POINT ( 'NONE', ( -5.339745962155499000, 86.13383585008101300, -28.37247596307048500 ) ) ; +#72314 = EDGE_CURVE ( 'NONE', #68569, #47492, #49803, .T. ) ; +#72315 = CARTESIAN_POINT ( 'NONE', ( -4.766907343688772300, 85.80000000000262600, -28.70555803802997700 ) ) ; +#72316 = EDGE_CURVE ( 'NONE', #69868, #75300, #47869, .T. ) ; +#72317 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 71.25732391202370800, -28.20555803803030800 ) ) ; +#72318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73011, #22957, #54216, #35738 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800051300 ), + .UNSPECIFIED. ) ; +#72319 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 9.932503002402294000, -28.20555803802994200 ) ) ; +#72320 = VERTEX_POINT ( 'NONE', #62799 ) ; +#72321 = EDGE_CURVE ( 'NONE', #30740, #72751, #2504, .T. ) ; +#72322 = CARTESIAN_POINT ( 'NONE', ( 3.284509040711368400, 92.73594724051947900, -28.65532419784739200 ) ) ; +#72323 = FACE_OUTER_BOUND ( 'NONE', #50749, .T. ) ; +#72324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72325 = ORIENTED_EDGE ( 'NONE', *, *, #34271, .F. ) ; +#72326 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 1.833333333333333000, -12.20555803803000600 ) ) ; +#72327 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#72328 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 36.16666666666667100, 3.794441961969996900 ) ) ; +#72329 = AXIS2_PLACEMENT_3D ( 'NONE', #15502, #59008, #21760 ) ; +#72330 = AXIS2_PLACEMENT_3D ( 'NONE', #62627, #25383, #68872 ) ; +#72331 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#72332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72333 = EDGE_CURVE ( 'NONE', #36817, #59983, #68859, .T. ) ; +#72334 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 1.166666666666679800, 6.794441961969992500 ) ) ; +#72335 = AXIS2_PLACEMENT_3D ( 'NONE', #45890, #8644, #52150 ) ; +#72336 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72337 = CARTESIAN_POINT ( 'NONE', ( 7.046668098596278200, 44.44999999999999600, -7.472033602278380600 ) ) ; +#72338 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72339 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 38.50000000000000000, -9.258116921287651700 ) ) ; +#72340 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72341 = EDGE_LOOP ( 'NONE', ( #41106, #33822, #5299, #69041 ) ) ; +#72342 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#72343 = CARTESIAN_POINT ( 'NONE', ( -10.16044954828104900, 81.13768531620326000, -28.37082013777818200 ) ) ; +#72344 = ORIENTED_EDGE ( 'NONE', *, *, #12740, .T. ) ; +#72345 = EDGE_CURVE ( 'NONE', #60180, #71618, #199, .T. ) ; +#72346 = AXIS2_PLACEMENT_3D ( 'NONE', #4535, #29593, #54300 ) ; +#72347 = AXIS2_PLACEMENT_3D ( 'NONE', #12580, #77989, #52938 ) ; +#72348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72349 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67947, #74228, #36925, #80464 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972908985886000E-007, 0.0005865296644893884500 ), + .UNSPECIFIED. ) ; +#72350 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#72351 = EDGE_LOOP ( 'NONE', ( #8213, #13069, #21305, #54497 ) ) ; +#72352 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849331700, 41.32033471810042600, -28.30868034705250800 ) ) ; +#72353 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#72354 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#72355 = FACE_OUTER_BOUND ( 'NONE', #19527, .T. ) ; +#72356 = ORIENTED_EDGE ( 'NONE', *, *, #14727, .F. ) ; +#72357 = CONICAL_SURFACE ( 'NONE', #29010, 10.50000000000009600, 0.7853981633974518300 ) ; +#72358 = ORIENTED_EDGE ( 'NONE', *, *, #29338, .F. ) ; +#72359 = CARTESIAN_POINT ( 'NONE', ( -9.887923813067800400E-014, 33.15857157145691000, -28.20555803802996700 ) ) ; +#72360 = FACE_OUTER_BOUND ( 'NONE', #76018, .T. ) ; +#72361 = CARTESIAN_POINT ( 'NONE', ( -3.371418216713580700, 80.16749699759769500, -28.25056166218022100 ) ) ; +#72362 = ORIENTED_EDGE ( 'NONE', *, *, #7781, .T. ) ; +#72363 = CARTESIAN_POINT ( 'NONE', ( -8.466819876342325900, 65.79999999999999700, -28.37307693585060500 ) ) ; +#72364 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655522100, 31.17701665379217600, -28.20555803802996000 ) ) ; +#72365 = EDGE_LOOP ( 'NONE', ( #45781, #76726, #69707, #50754 ) ) ; +#72366 = CARTESIAN_POINT ( 'NONE', ( -10.97683272551928900, 39.08088969930761200, -28.30223898143235700 ) ) ; +#72367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72368 = ADVANCED_FACE ( 'NONE', ( #68342 ), #13964, .T. ) ; +#72369 = ORIENTED_EDGE ( 'NONE', *, *, #59336, .F. ) ; +#72370 = CARTESIAN_POINT ( 'NONE', ( 7.238199452804072300, 22.65857157145701000, -28.37229765499279600 ) ) ; +#72371 = FACE_OUTER_BOUND ( 'NONE', #31765, .T. ) ; +#72372 = ADVANCED_FACE ( 'NONE', ( #79058 ), #61676, .T. ) ; +#72373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72374 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20491, #76494, #14497, #58013 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470524634016500E-007, 0.0007303749718166618600 ), + .UNSPECIFIED. ) ; +#72375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72376 = ORIENTED_EDGE ( 'NONE', *, *, #19876, .F. ) ; +#72377 = CONICAL_SURFACE ( 'NONE', #29559, 10.50000000000009400, 0.7853981633974500600 ) ; +#72378 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 42.00000000000000700, -1.205558038030005300 ) ) ; +#72379 = EDGE_LOOP ( 'NONE', ( #26259, #68747, #20773 ) ) ; +#72380 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72381 = CARTESIAN_POINT ( 'NONE', ( -9.279233496941909500, 60.09951448976264000, -28.63282631410031000 ) ) ; +#72382 = ORIENTED_EDGE ( 'NONE', *, *, #55884, .T. ) ; +#72383 = EDGE_LOOP ( 'NONE', ( #35453, #43840, #37434, #15755 ) ) ; +#72384 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 61.46283204837340000, -28.48697406221667400 ) ) ; +#72385 = ORIENTED_EDGE ( 'NONE', *, *, #57284, .F. ) ; +#72386 = CIRCLE ( 'NONE', #13265, 10.50000000000009600 ) ; +#72387 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783879200, 41.43250300240230600, -28.23966044827355000 ) ) ; +#72388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72389 = AXIS2_PLACEMENT_3D ( 'NONE', #65830, #28590, #72094 ) ; +#72390 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#72391 = ORIENTED_EDGE ( 'NONE', *, *, #30849, .T. ) ; +#72392 = CARTESIAN_POINT ( 'NONE', ( -0.1343699490524946100, 57.14999999999999900, 7.470959123214227800 ) ) ; +#72393 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20986, #45668, #27239, #70724 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081906068400E-007, 0.001119323292485705800 ), + .UNSPECIFIED. ) ; +#72394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72395 = ADVANCED_FACE ( 'NONE', ( #31372 ), #28603, .T. ) ; +#72396 = ORIENTED_EDGE ( 'NONE', *, *, #64443, .T. ) ; +#72397 = VERTEX_POINT ( 'NONE', #1407 ) ; +#72398 = CARTESIAN_POINT ( 'NONE', ( -10.48315280349245900, 39.70543520232828200, -28.70555803802995200 ) ) ; +#72399 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988900, 17.63176086632794400, -28.70555803802992800 ) ) ; +#72400 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 57.00000000000000700, 6.794441961969995200 ) ) ; +#72401 = ORIENTED_EDGE ( 'NONE', *, *, #61865, .F. ) ; +#72402 = CONICAL_SURFACE ( 'NONE', #13823, 10.50000000000009600, 0.7853981633974500600 ) ; +#72403 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39788, #52271, #71068, #33817 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807164900, 0.0005317208426584866700 ), + .UNSPECIFIED. ) ; +#72405 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 70.16054007504466500, -28.34042301926881200 ) ) ; +#72406 = PLANE ( 'NONE', #9225 ) ; +#72407 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894378600, 14.05000000000018000, -28.70555803803042500 ) ) ; +#72408 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72409 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59816, #16288, #53540, #22536 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170520674900, 0.004414519045340937200 ), + .UNSPECIFIED. ) ; +#72410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#72411 = FACE_OUTER_BOUND ( 'NONE', #36018, .T. ) ; +#72412 = EDGE_CURVE ( 'NONE', #50605, #25711, #30530, .T. ) ; +#72413 = EDGE_CURVE ( 'NONE', #57903, #43121, #45042, .T. ) ; +#72414 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72415 = VERTEX_POINT ( 'NONE', #44881 ) ; +#72416 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 10.49999999999999800, -4.865812075874393000 ) ) ; +#72417 = VERTEX_POINT ( 'NONE', #1665 ) ; +#72418 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72419 = EDGE_CURVE ( 'NONE', #72649, #38367, #54389, .T. ) ; +#72420 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72421 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 50.66666666666667900, -8.133761268305512700 ) ) ; +#72422 = EDGE_CURVE ( 'NONE', #28672, #55691, #39931, .T. ) ; +#72423 = CONICAL_SURFACE ( 'NONE', #50561, 10.50000000000009600, 0.7853981633974500600 ) ; +#72424 = ORIENTED_EDGE ( 'NONE', *, *, #19438, .T. ) ; +#72425 = AXIS2_PLACEMENT_3D ( 'NONE', #19467, #75486, #31976 ) ; +#72426 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#72427 = CONICAL_SURFACE ( 'NONE', #25274, 10.50000000000009200, 0.7853981633974482800 ) ; +#72428 = ORIENTED_EDGE ( 'NONE', *, *, #35405, .F. ) ; +#72429 = EDGE_LOOP ( 'NONE', ( #10487, #21712, #15558 ) ) ; +#72430 = CIRCLE ( 'NONE', #76144, 10.50000000000009600 ) ; +#72431 = ORIENTED_EDGE ( 'NONE', *, *, #45404, .T. ) ; +#72432 = CARTESIAN_POINT ( 'NONE', ( -15.12771242901985300, 9.866092851561598200, -28.70466362490903500 ) ) ; +#72433 = EDGE_LOOP ( 'NONE', ( #68509, #13774, #2974 ) ) ; +#72434 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537153700, 71.25732391202396300, -28.20555803802997700 ) ) ; +#72435 = VERTEX_POINT ( 'NONE', #32952 ) ; +#72436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72437 = AXIS2_PLACEMENT_3D ( 'NONE', #66441, #22914, #35446 ) ; +#72438 = EDGE_CURVE ( 'NONE', #21619, #22802, #25492, .T. ) ; +#72439 = EDGE_CURVE ( 'NONE', #58523, #67990, #63621, .T. ) ; +#72440 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51891, #70417, #20949, #64481 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681249689600, 0.0007802304471363264700 ), + .UNSPECIFIED. ) ; +#72441 = EDGE_CURVE ( 'NONE', #54460, #13135, #47022, .T. ) ; +#72442 = ADVANCED_FACE ( 'NONE', ( #78200 ), #10064, .T. ) ; +#72443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72446 = FACE_OUTER_BOUND ( 'NONE', #15093, .T. ) ; +#72445 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72444 = AXIS2_PLACEMENT_3D ( 'NONE', #73043, #35772, #79292 ) ; +#72447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72448 = ORIENTED_EDGE ( 'NONE', *, *, #6180, .F. ) ; +#72449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72450 = CIRCLE ( 'NONE', #38301, 9.500000000000097700 ) ; +#72451 = ORIENTED_EDGE ( 'NONE', *, *, #28493, .T. ) ; +#72452 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72453 = VERTEX_POINT ( 'NONE', #58242 ) ; +#72454 = ORIENTED_EDGE ( 'NONE', *, *, #23081, .F. ) ; +#72455 = EDGE_LOOP ( 'NONE', ( #17866, #34233, #47257, #39243, #75092 ) ) ; +#72456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72457 = EDGE_CURVE ( 'NONE', #48195, #28595, #11023, .T. ) ; +#72458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72459 = ADVANCED_FACE ( 'NONE', ( #12009 ), #57734, .F. ) ; +#72460 = CIRCLE ( 'NONE', #66877, 10.50000000000009800 ) ; +#72461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72462 = AXIS2_PLACEMENT_3D ( 'NONE', #14327, #39044, #20587 ) ; +#72463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72464 = AXIS2_PLACEMENT_3D ( 'NONE', #59910, #22640, #66165 ) ; +#72465 = ORIENTED_EDGE ( 'NONE', *, *, #19933, .F. ) ; +#72466 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#72467 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72468 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851106600, 25.50238095238044200, -28.70555803802994200 ) ) ; +#72469 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#72470 = VERTEX_POINT ( 'NONE', #45972 ) ; +#72471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72475 = VERTEX_POINT ( 'NONE', #8718 ) ; +#72476 = CONICAL_SURFACE ( 'NONE', #5958, 10.50000000000009600, 0.7853981633974518300 ) ; +#72477 = AXIS2_PLACEMENT_3D ( 'NONE', #40499, #46730, #28036 ) ; +#72478 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72480 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63398, #13885, #32633, #76136 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#72481 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72482 = CARTESIAN_POINT ( 'NONE', ( 17.30192380577526000, 61.75831290081718800, -28.43753768099859900 ) ) ; +#72483 = ADVANCED_FACE ( 'NONE', ( #59711 ), #24661, .F. ) ; +#72484 = AXIS2_PLACEMENT_3D ( 'NONE', #60116, #66365, #16592 ) ; +#72485 = FACE_OUTER_BOUND ( 'NONE', #22397, .T. ) ; +#72486 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76524, #70269, #64336, #27058 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930420500E-018, 0.001333132141676192800 ), + .UNSPECIFIED. ) ; +#72487 = ORIENTED_EDGE ( 'NONE', *, *, #70340, .F. ) ; +#72488 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 56.66666666666667100, 2.794441961969992100 ) ) ; +#72489 = AXIS2_PLACEMENT_3D ( 'NONE', #26863, #45298, #76607 ) ; +#72490 = EDGE_LOOP ( 'NONE', ( #24627, #20359, #15180 ) ) ; +#72491 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72492 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857142900, 10.02858243452105700, -28.70555803802994200 ) ) ; +#72493 = ORIENTED_EDGE ( 'NONE', *, *, #37603, .T. ) ; +#72494 = EDGE_CURVE ( 'NONE', #48534, #76937, #43137, .T. ) ; +#72495 = PRESENTATION_STYLE_ASSIGNMENT (( #21702 ) ) ; +#72496 = CONICAL_SURFACE ( 'NONE', #25762, 10.00000000000009200, 0.7853981633974447300 ) ; +#72497 = AXIS2_PLACEMENT_3D ( 'NONE', #39705, #2429, #45941 ) ; +#72498 = ORIENTED_EDGE ( 'NONE', *, *, #3066, .T. ) ; +#72499 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274714300, 13.73212903577628200, -28.37244029424738300 ) ) ; +#72500 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999996400, 50.83333333333333600, -3.349151577478988200 ) ) ; +#72501 = ORIENTED_EDGE ( 'NONE', *, *, #61459, .T. ) ; +#72502 = CIRCLE ( 'NONE', #43255, 9.500000000000101300 ) ; +#72503 = FACE_OUTER_BOUND ( 'NONE', #43980, .T. ) ; +#72504 = VERTEX_POINT ( 'NONE', #64802 ) ; +#72505 = CARTESIAN_POINT ( 'NONE', ( 5.727308459283274400, 85.79999999999967000, -28.53979898350193200 ) ) ; +#72506 = EDGE_LOOP ( 'NONE', ( #63121, #6651, #61744 ) ) ; +#72507 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567176700, 41.24660241562182300, -28.20555803802996700 ) ) ; +#72508 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27054, #64332, #33287, #76801 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711422351500E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#72509 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999613600, 53.89610994602590200, -28.37519436813202500 ) ) ; +#72510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72511 = CARTESIAN_POINT ( 'NONE', ( 3.121412514499975400, 71.76337688193793000, -28.37223523914907700 ) ) ; +#72512 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 28.00000000000001400, -1.205558038030002800 ) ) ; +#72513 = PLANE ( 'NONE', #10384 ) ; +#72514 = CONICAL_SURFACE ( 'NONE', #19535, 10.50000000000009600, 0.7853981633974500600 ) ; +#72515 = ORIENTED_EDGE ( 'NONE', *, *, #51679, .T. ) ; +#72516 = CONICAL_SURFACE ( 'NONE', #30502, 10.00000000000009600, 0.7853981633974447300 ) ; +#72517 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500406100, 61.76337688193847000, -28.37223523914912000 ) ) ; +#72518 = EDGE_CURVE ( 'NONE', #58595, #106, #26631, .T. ) ; +#72519 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#72520 = EDGE_LOOP ( 'NONE', ( #60329, #58273, #45744, #71783 ) ) ; +#72521 = VERTEX_POINT ( 'NONE', #33764 ) ; +#72523 = EDGE_CURVE ( 'NONE', #60076, #20757, #77324, .T. ) ; +#72522 = ORIENTED_EDGE ( 'NONE', *, *, #32789, .T. ) ; +#72524 = ORIENTED_EDGE ( 'NONE', *, *, #45299, .T. ) ; +#72525 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671975500, 59.66414768974075100, -28.38420446581272600 ) ) ; +#72526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72527 = ORIENTED_EDGE ( 'NONE', *, *, #25343, .T. ) ; +#72528 = CIRCLE ( 'NONE', #11597, 9.500000000000095900 ) ; +#72529 = ORIENTED_EDGE ( 'NONE', *, *, #12114, .T. ) ; +#72530 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72531 = EDGE_LOOP ( 'NONE', ( #45343, #49754, #17322, #15306 ) ) ; +#72532 = EDGE_CURVE ( 'NONE', #39390, #54160, #62890, .T. ) ; +#72533 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26268, #63516, #32483, #76001 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667571935600, 0.0008043487657981699700 ), + .UNSPECIFIED. ) ; +#72534 = ADVANCED_FACE ( 'NONE', ( #76228 ), #52501, .T. ) ; +#72535 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528127800, 9.968680884981225200, -28.51286550264509100 ) ) ; +#72536 = EDGE_CURVE ( 'NONE', #19734, #78930, #74310, .T. ) ; +#72537 = VERTEX_POINT ( 'NONE', #34310 ) ; +#72538 = ORIENTED_EDGE ( 'NONE', *, *, #7452, .T. ) ; +#72539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72540 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 62.50000000000001400, -4.865812075874393000 ) ) ; +#72541 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72542 = EDGE_CURVE ( 'NONE', #7608, #52291, #41189, .T. ) ; +#72543 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72544 = VERTEX_POINT ( 'NONE', #53045 ) ; +#72545 = CIRCLE ( 'NONE', #35629, 9.500000000000099500 ) ; +#72546 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72548 = ADVANCED_FACE ( 'NONE', ( #2131 ), #77816, .T. ) ; +#72549 = CARTESIAN_POINT ( 'NONE', ( -3.985751803131263800, 60.01994747561622000, -28.24986299608850300 ) ) ; +#72550 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72551 = AXIS2_PLACEMENT_3D ( 'NONE', #28955, #72447, #35188 ) ; +#72552 = EDGE_CURVE ( 'NONE', #45369, #3478, #48381, .T. ) ; +#72553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72554 = EDGE_CURVE ( 'NONE', #7287, #10425, #33951, .T. ) ; +#72555 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#72556 = EDGE_CURVE ( 'NONE', #23867, #46326, #55774, .T. ) ; +#72557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72559 = CARTESIAN_POINT ( 'NONE', ( -7.769404656680600300, 50.54999999999999700, -28.45605139793075000 ) ) ; +#72560 = CARTESIAN_POINT ( 'NONE', ( 17.41542217840001400, 51.18375493410856300, -28.40985430318290700 ) ) ; +#72561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72563 = CONICAL_SURFACE ( 'NONE', #32422, 10.00000000000009200, 0.7853981633974447300 ) ; +#72564 = ADVANCED_FACE ( 'NONE', ( #72371 ), #37264, .F. ) ; +#72565 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44702, #57013, #6952, #7480 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.214306433183765000E-017, 0.002676326193402434000 ), + .UNSPECIFIED. ) ; +#72566 = CARTESIAN_POINT ( 'NONE', ( -16.72465273632056800, 7.633750005822578000, -28.43690117338045200 ) ) ; +#72567 = CARTESIAN_POINT ( 'NONE', ( 17.37141821671359700, 60.16749699759768800, -28.25056166218022100 ) ) ; +#72568 = EDGE_CURVE ( 'NONE', #52508, #75742, #19487, .T. ) ; +#72569 = ORIENTED_EDGE ( 'NONE', *, *, #46489, .T. ) ; +#72570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72571 = CONICAL_SURFACE ( 'NONE', #80701, 10.50000000000009400, 0.7853981633974500600 ) ; +#72572 = AXIS2_PLACEMENT_3D ( 'NONE', #56110, #18851, #62381 ) ; +#72573 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72574 = CARTESIAN_POINT ( 'NONE', ( -7.917543811056674500, 45.54999999999998300, -28.70555803802996700 ) ) ; +#72576 = ORIENTED_EDGE ( 'NONE', *, *, #50788, .T. ) ; +#72575 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099097900, 10.03732497909458500, -28.41043597897464700 ) ) ; +#72577 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310551700, 71.49769010897077200, -28.61774594594320900 ) ) ; +#72578 = ADVANCED_FACE ( 'NONE', ( #53841 ), #4197, .T. ) ; +#72579 = CIRCLE ( 'NONE', #8278, 10.00000000000009200 ) ; +#72580 = FACE_OUTER_BOUND ( 'NONE', #37854, .T. ) ; +#72581 = ORIENTED_EDGE ( 'NONE', *, *, #20354, .T. ) ; +#72582 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 42.18315603019281200, -28.70555803802999500 ) ) ; +#72583 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72584 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, -0.3333333333333209400, 8.320721403598824400 ) ) ; +#72585 = CONICAL_SURFACE ( 'NONE', #43718, 10.00000000000009200, 0.7853981633974447300 ) ; +#72586 = EDGE_LOOP ( 'NONE', ( #33324, #59301, #254, #12555 ) ) ; +#72587 = ORIENTED_EDGE ( 'NONE', *, *, #11438, .T. ) ; +#72588 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 34.00000000000000700, -6.205558038030003100 ) ) ; +#72589 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#72590 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805678500, 22.91427200762526800, -28.67630847257084200 ) ) ; +#72592 = LINE ( 'NONE', #43260, #76462 ) ; +#72591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72593 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -0.9999999999999870100, -9.205558038030005700 ) ) ; +#72594 = CONICAL_SURFACE ( 'NONE', #28397, 10.00000000000009600, 0.7853981633974482800 ) ; +#72595 = AXIS2_PLACEMENT_3D ( 'NONE', #28515, #15959, #72007 ) ; +#72596 = VERTEX_POINT ( 'NONE', #10364 ) ; +#72597 = VERTEX_POINT ( 'NONE', #53869 ) ; +#72598 = CARTESIAN_POINT ( 'NONE', ( -0.8512419287413609500, 44.45000000000003800, -10.66633541276109300 ) ) ; +#72599 = CARTESIAN_POINT ( 'NONE', ( 11.00202449666889500, 49.78907889423216200, -28.25433304472396800 ) ) ; +#72600 = EDGE_CURVE ( 'NONE', #34605, #11856, #5016, .T. ) ; +#72601 = ORIENTED_EDGE ( 'NONE', *, *, #19438, .F. ) ; +#72602 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 36.33333333333332900, 8.320721403598817300 ) ) ; +#72603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72604 = AXIS2_PLACEMENT_3D ( 'NONE', #49555, #12360, #55841 ) ; +#72605 = ORIENTED_EDGE ( 'NONE', *, *, #36227, .T. ) ; +#72606 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260018400, 30.89965687931164200, -28.70555803803001600 ) ) ; +#72607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#72608 = ORIENTED_EDGE ( 'NONE', *, *, #5452, .F. ) ; +#72609 = CIRCLE ( 'NONE', #50477, 10.00000000000009200 ) ; +#72610 = AXIS2_PLACEMENT_3D ( 'NONE', #14428, #21806, #1632 ) ; +#72611 = ORIENTED_EDGE ( 'NONE', *, *, #8855, .T. ) ; +#72612 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 47.10073525436786200, -28.70555803802996700 ) ) ; +#72613 = CARTESIAN_POINT ( 'NONE', ( -10.51684719650754300, 50.20543520232829600, -28.70555803802996700 ) ) ; +#72614 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46598, #77645, #15646, #59143 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001679852151197476300 ), + .UNSPECIFIED. ) ; +#72615 = CARTESIAN_POINT ( 'NONE', ( -8.498152090609190500, 25.18533208989812500, -28.53910738522646500 ) ) ; +#72616 = CARTESIAN_POINT ( 'NONE', ( -17.90233405035081700, 60.23507838941434800, -28.27580420063968300 ) ) ; +#72617 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 4.999999999999995600, -19.24456555051327900 ) ) ; +#72618 = CIRCLE ( 'NONE', #39896, 10.00000000000009600 ) ; +#72619 = AXIS2_PLACEMENT_3D ( 'NONE', #38765, #1529, #45006 ) ; +#72620 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547800, 80.16054007504448000, -28.34042301926906000 ) ) ; +#72621 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#72622 = ORIENTED_EDGE ( 'NONE', *, *, #28240, .T. ) ; +#72623 = FACE_OUTER_BOUND ( 'NONE', #61869, .T. ) ; +#72624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72625 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965574600, 31.17701665379186000, -28.20555803802995200 ) ) ; +#72626 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 80.16349705304865800, -28.30782889147482400 ) ) ; +#72627 = CARTESIAN_POINT ( 'NONE', ( -10.72257783544433000, 71.87833896172668300, -28.53892303408229500 ) ) ; +#72628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72629 = ADVANCED_FACE ( 'NONE', ( #39214 ), #51844, .F. ) ; +#72630 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72632 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 42.97376207875060300, -28.70555803802997700 ) ) ; +#72633 = CARTESIAN_POINT ( 'NONE', ( -5.354186913875013300, 65.13282980700522300, -28.53914313452735400 ) ) ; +#72634 = EDGE_CURVE ( 'NONE', #13403, #12931, #68441, .T. ) ; +#72635 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 39.83333333333334300, -3.349151577478984600 ) ) ; +#72636 = CONICAL_SURFACE ( 'NONE', #41231, 10.50000000000009200, 0.7853981633974482800 ) ; +#72637 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#72638 = EDGE_CURVE ( 'NONE', #23125, #34605, #20752, .T. ) ; +#72639 = CIRCLE ( 'NONE', #51402, 9.500000000000101300 ) ; +#72640 = CARTESIAN_POINT ( 'NONE', ( 5.383156030192889600, 86.79999999999959900, -28.70555803803030800 ) ) ; +#72641 = EDGE_LOOP ( 'NONE', ( #41128, #41724, #39723, #60982 ) ) ; +#72642 = FACE_OUTER_BOUND ( 'NONE', #78036, .T. ) ; +#72643 = ADVANCED_FACE ( 'NONE', ( #6159 ), #66495, .F. ) ; +#72644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72646 = CARTESIAN_POINT ( 'NONE', ( -6.089767956707055100, 57.15000000000002000, 5.703806629437150600 ) ) ; +#72647 = EDGE_CURVE ( 'NONE', #37840, #29577, #2223, .T. ) ; +#72648 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72649 = VERTEX_POINT ( 'NONE', #10898 ) ; +#72650 = PLANE ( 'NONE', #33506 ) ; +#72651 = CIRCLE ( 'NONE', #12980, 9.500000000000097700 ) ; +#72652 = CIRCLE ( 'NONE', #14194, 10.50000000000009600 ) ; +#72653 = EDGE_CURVE ( 'NONE', #28695, #73343, #71341, .T. ) ; +#72654 = EDGE_LOOP ( 'NONE', ( #10366, #52895, #7945, #76752 ) ) ; +#72655 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72656 = EDGE_CURVE ( 'NONE', #72130, #40694, #18793, .T. ) ; +#72657 = ADVANCED_FACE ( 'NONE', ( #70371 ), #29690, .T. ) ; +#72658 = CARTESIAN_POINT ( 'NONE', ( -20.22805471304442900, 7.385973307714241500, -27.23008379674763200 ) ) ; +#72659 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37665, #18920, #25188, #407 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629352929037000E-007, 0.0007670609591620299300 ), + .UNSPECIFIED. ) ; +#72661 = ORIENTED_EDGE ( 'NONE', *, *, #37337, .T. ) ; +#72660 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72662 = ADVANCED_FACE ( 'NONE', ( #35380 ), #64560, .F. ) ; +#72663 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784449700, 85.79999999999984100, -28.20555803803014400 ) ) ; +#72664 = ORIENTED_EDGE ( 'NONE', *, *, #77760, .T. ) ; +#72665 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434400, 12.16464174796073500, -28.53896444442197500 ) ) ; +#72666 = AXIS2_PLACEMENT_3D ( 'NONE', #40244, #2981, #46469 ) ; +#72667 = EDGE_CURVE ( 'NONE', #53675, #39199, #281, .T. ) ; +#72668 = EDGE_CURVE ( 'NONE', #10693, #41614, #56885, .T. ) ; +#72669 = EDGE_CURVE ( 'NONE', #75777, #72649, #42399, .T. ) ; +#72670 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72671 = ADVANCED_FACE ( 'NONE', ( #33391 ), #14901, .T. ) ; +#72672 = CONICAL_SURFACE ( 'NONE', #3785, 10.50000000000009200, 0.7853981633974482800 ) ; +#72673 = EDGE_LOOP ( 'NONE', ( #24126, #63550, #35391 ) ) ; +#72674 = AXIS2_PLACEMENT_3D ( 'NONE', #74865, #37561, #318 ) ; +#72675 = ORIENTED_EDGE ( 'NONE', *, *, #21663, .T. ) ; +#72676 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 22.42856308690589300, -28.36981695106777900 ) ) ; +#72677 = VERTEX_POINT ( 'NONE', #61491 ) ; +#72678 = ORIENTED_EDGE ( 'NONE', *, *, #71758, .F. ) ; +#72679 = CONICAL_SURFACE ( 'NONE', #31823, 10.00000000000009200, 0.7853981633974447300 ) ; +#72680 = CONICAL_SURFACE ( 'NONE', #16555, 10.50000000000009600, 0.7853981633974500600 ) ; +#72681 = AXIS2_PLACEMENT_3D ( 'NONE', #21742, #33424, #58979 ) ; +#72682 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 8.333333333333342800, 1.294441961969997200 ) ) ; +#72683 = AXIS2_PLACEMENT_3D ( 'NONE', #79540, #42237, #5003 ) ; +#72684 = ORIENTED_EDGE ( 'NONE', *, *, #17504, .T. ) ; +#72685 = AXIS2_PLACEMENT_3D ( 'NONE', #74438, #49902, #24929 ) ; +#72686 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#72687 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537160800, 90.34267608797586000, -28.20555803803014400 ) ) ; +#72688 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 48.49999999999998600, 4.650848422521016300 ) ) ; +#72689 = ORIENTED_EDGE ( 'NONE', *, *, #55590, .F. ) ; +#72690 = CIRCLE ( 'NONE', #11203, 10.00000000000009200 ) ; +#72691 = PLANE ( 'NONE', #20853 ) ; +#72692 = ORIENTED_EDGE ( 'NONE', *, *, #5818, .F. ) ; +#72693 = CIRCLE ( 'NONE', #18337, 10.50000000000009600 ) ; +#72694 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72696 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 30.93250300240229200, -28.20555803802996700 ) ) ; +#72695 = FACE_OUTER_BOUND ( 'NONE', #79887, .T. ) ; +#72697 = AXIS2_PLACEMENT_3D ( 'NONE', #53292, #16037, #59570 ) ; +#72698 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#72699 = EDGE_CURVE ( 'NONE', #49730, #10459, #47951, .T. ) ; +#72700 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 12.15857157145701200, -28.20555803802994200 ) ) ; +#72701 = ORIENTED_EDGE ( 'NONE', *, *, #19001, .F. ) ; +#72702 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#72703 = CARTESIAN_POINT ( 'NONE', ( -12.43172238542980100, 50.54999999999999700, -28.55169349139176300 ) ) ; +#72704 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181873500, 51.65075715145283700, -28.20555803803047800 ) ) ; +#72705 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72706 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#72707 = FACE_OUTER_BOUND ( 'NONE', #63606, .T. ) ; +#72708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72709 = ORIENTED_EDGE ( 'NONE', *, *, #51090, .F. ) ; +#72711 = EDGE_CURVE ( 'NONE', #55704, #6729, #28001, .T. ) ; +#72710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79329, #66817, #4776, #48277 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.887813025444319900E-018, 0.001246264537621133600 ), + .UNSPECIFIED. ) ; +#72712 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#72713 = CYLINDRICAL_SURFACE ( 'NONE', #43562, 10.00000000000000000 ) ; +#72714 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72715 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 41.68929190448937300, -28.20555803802997700 ) ) ; +#72716 = AXIS2_PLACEMENT_3D ( 'NONE', #70643, #33383, #76906 ) ; +#72717 = EDGE_LOOP ( 'NONE', ( #55939, #66250, #31143, #4033 ) ) ; +#72718 = ORIENTED_EDGE ( 'NONE', *, *, #19015, .F. ) ; +#72719 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33582, #52042, #39833, #2541 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.001179148174662956300 ), + .UNSPECIFIED. ) ; +#72720 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851488500, 44.59761904761904800, -28.70555803802996700 ) ) ; +#72721 = VERTEX_POINT ( 'NONE', #18220 ) ; +#72722 = FACE_OUTER_BOUND ( 'NONE', #51621, .T. ) ; +#72723 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#72724 = CARTESIAN_POINT ( 'NONE', ( -15.46693852783916500, 85.79999999999998300, -28.37297418064014600 ) ) ; +#72725 = ORIENTED_EDGE ( 'NONE', *, *, #50931, .F. ) ; +#72726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72727 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719597800, 67.94142842854297700, -28.37229765499279200 ) ) ; +#72728 = CARTESIAN_POINT ( 'NONE', ( -17.30183166260302500, 61.75837447661946600, -28.43755849160216100 ) ) ; +#72729 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1443, #38685, #51178, #13984 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572965300, 0.0008043487657982741600 ), + .UNSPECIFIED. ) ; +#72730 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656714500, 39.35339758437810100, -28.20555803802995200 ) ) ; +#72731 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280410200, 36.94142842854297000, -28.37229765499283100 ) ) ; +#72732 = CIRCLE ( 'NONE', #48323, 9.500000000000099500 ) ; +#72733 = AXIS2_PLACEMENT_3D ( 'NONE', #45030, #7801, #51291 ) ; +#72734 = CIRCLE ( 'NONE', #78790, 10.00000000000009200 ) ; +#72735 = ORIENTED_EDGE ( 'NONE', *, *, #48479, .T. ) ; +#72736 = CARTESIAN_POINT ( 'NONE', ( -4.167182817396301300, 90.56656192502380500, -28.37235298663059900 ) ) ; +#72737 = CARTESIAN_POINT ( 'NONE', ( -2.963744891818757700, 89.94924284854707300, -28.20555803803005900 ) ) ; +#72738 = EDGE_LOOP ( 'NONE', ( #31133, #78766, #67992, #45850, #12223, #8704 ) ) ; +#72739 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655456400, 10.17701665379220800, -28.20555803802993500 ) ) ; +#72740 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 41.67701665379221500, -28.20555803802997400 ) ) ; +#72741 = CARTESIAN_POINT ( 'NONE', ( -6.761800547195928600, 53.65857157145701000, -28.37229765499282100 ) ) ; +#72742 = AXIS2_PLACEMENT_3D ( 'NONE', #3477, #46983, #9765 ) ; +#72743 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23367, #17110, #29638, #73144 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936609700, 0.0005776948474817092800 ), + .UNSPECIFIED. ) ; +#72744 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72746 = FACE_OUTER_BOUND ( 'NONE', #39707, .T. ) ; +#72747 = ORIENTED_EDGE ( 'NONE', *, *, #30391, .F. ) ; +#72748 = EDGE_CURVE ( 'NONE', #25625, #78191, #13521, .T. ) ; +#72749 = ORIENTED_EDGE ( 'NONE', *, *, #18892, .T. ) ; +#72750 = ORIENTED_EDGE ( 'NONE', *, *, #78260, .F. ) ; +#72751 = VERTEX_POINT ( 'NONE', #36960 ) ; +#72752 = ADVANCED_FACE ( 'NONE', ( #31467 ), #45998, .F. ) ; +#72753 = FACE_OUTER_BOUND ( 'NONE', #59035, .T. ) ; +#72754 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 54.49999999999998600, -7.061964498581016200 ) ) ; +#72755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72756 = ORIENTED_EDGE ( 'NONE', *, *, #55844, .T. ) ; +#72757 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9550, #3282, #34323, #15811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185006500, 0.001517199873936116100 ), + .UNSPECIFIED. ) ; +#72758 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534550700, 18.99920551340383700, -28.70555803803009500 ) ) ; +#72759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72760 = ADVANCED_FACE ( 'NONE', ( #22707 ), #12966, .F. ) ; +#72761 = CONICAL_SURFACE ( 'NONE', #24190, 10.00000000000009400, 0.7853981633974447300 ) ; +#72762 = EDGE_CURVE ( 'NONE', #69682, #23353, #29529, .T. ) ; +#72764 = EDGE_CURVE ( 'NONE', #64, #8438, #79823, .T. ) ; +#72763 = ORIENTED_EDGE ( 'NONE', *, *, #61086, .T. ) ; +#72765 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 9.932503002402294000, -28.20555803802994200 ) ) ; +#72766 = ORIENTED_EDGE ( 'NONE', *, *, #13221, .T. ) ; +#72767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72768 = CIRCLE ( 'NONE', #32908, 10.00000000000009400 ) ; +#72769 = AXIS2_PLACEMENT_3D ( 'NONE', #31072, #68315, #43537 ) ; +#72770 = EDGE_CURVE ( 'NONE', #22368, #56790, #8080, .T. ) ; +#72771 = EDGE_CURVE ( 'NONE', #33070, #28617, #79149, .T. ) ; +#72772 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000046700, 70.52242369685780000, -28.53861367218626200 ) ) ; +#72774 = ORIENTED_EDGE ( 'NONE', *, *, #73031, .T. ) ; +#72773 = CARTESIAN_POINT ( 'NONE', ( -3.878587485500128100, 79.83662311806175200, -28.37223523914899900 ) ) ; +#72775 = ADVANCED_FACE ( 'NONE', ( #16859 ), #11005, .F. ) ; +#72776 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999633200, 54.37738371066736700, -28.70555803803030800 ) ) ; +#72777 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000002100, 61.30277574221146600, -28.32715733700507200 ) ) ; +#72778 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 25.83333333333333900, 1.741883078712340300 ) ) ; +#72779 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72780 = EDGE_CURVE ( 'NONE', #68875, #56812, #65396, .T. ) ; +#72781 = AXIS2_PLACEMENT_3D ( 'NONE', #73880, #36579, #80116 ) ; +#72782 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, 79.63176086632761000, -28.70555803803030800 ) ) ; +#72783 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72784 = FACE_OUTER_BOUND ( 'NONE', #80772, .T. ) ; +#72785 = EDGE_LOOP ( 'NONE', ( #7858, #8465, #11259 ) ) ; +#72786 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#72787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72788 = LINE ( 'NONE', #52887, #58171 ) ; +#72789 = AXIS2_PLACEMENT_3D ( 'NONE', #62967, #25712, #69201 ) ; +#72790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72791 = ORIENTED_EDGE ( 'NONE', *, *, #76706, .F. ) ; +#72792 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 30.74660241562190100, -28.20555803802995200 ) ) ; +#72793 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 47.44142842854297000, -28.20555803802996700 ) ) ; +#72794 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72795 = CONICAL_SURFACE ( 'NONE', #53100, 10.50000000000009600, 0.7853981633974500600 ) ; +#72796 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 60.33333333333333600, 1.294441961969997200 ) ) ; +#72797 = ORIENTED_EDGE ( 'NONE', *, *, #49125, .T. ) ; +#72798 = CARTESIAN_POINT ( 'NONE', ( 24.94311578411328200, 5.028442107943263300, -19.93543921666511700 ) ) ; +#72799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72801 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#72802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72803 = ORIENTED_EDGE ( 'NONE', *, *, #63372, .F. ) ; +#72804 = CARTESIAN_POINT ( 'NONE', ( 16.62080236466633200, 50.33106028708534300, -28.57333386111659500 ) ) ; +#72805 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72806 = AXIS2_PLACEMENT_3D ( 'NONE', #39468, #2196, #45698 ) ; +#72807 = CARTESIAN_POINT ( 'NONE', ( 5.701713330690303400, 9.866394758536055000, -28.70555803803002000 ) ) ; +#72808 = EDGE_CURVE ( 'NONE', #16181, #66645, #77177, .T. ) ; +#72809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72810 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#72811 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72812 = FACE_OUTER_BOUND ( 'NONE', #45761, .T. ) ; +#72813 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999991700, 28.13176086632792000, -28.70555803802994200 ) ) ; +#72814 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7867, #45090, #20141, #51350 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002971944283326625500, 0.0007287255810274895200 ), + .UNSPECIFIED. ) ; +#72815 = CONICAL_SURFACE ( 'NONE', #27178, 10.00000000000009200, 0.7853981633974447300 ) ; +#72816 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72817 = ORIENTED_EDGE ( 'NONE', *, *, #15801, .F. ) ; +#72818 = CARTESIAN_POINT ( 'NONE', ( 11.15550207715069000, 30.82033471810042600, -28.30868034705249800 ) ) ; +#72819 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 68.17143691309408400, -28.36981695106780400 ) ) ; +#72820 = ORIENTED_EDGE ( 'NONE', *, *, #12303, .F. ) ; +#72821 = CARTESIAN_POINT ( 'NONE', ( -2.716823492901133500, 28.56267502090524600, -28.41043597897440500 ) ) ; +#72822 = ORIENTED_EDGE ( 'NONE', *, *, #79202, .F. ) ; +#72823 = EDGE_CURVE ( 'NONE', #38287, #24233, #50859, .T. ) ; +#72824 = ORIENTED_EDGE ( 'NONE', *, *, #48520, .F. ) ; +#72825 = VERTEX_POINT ( 'NONE', #75052 ) ; +#72826 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528358700, 9.968680884981202100, -28.51286550264501000 ) ) ; +#72827 = AXIS2_PLACEMENT_3D ( 'NONE', #24984, #37730, #476 ) ; +#72828 = AXIS2_PLACEMENT_3D ( 'NONE', #44526, #7293, #50801 ) ; +#72829 = ORIENTED_EDGE ( 'NONE', *, *, #763, .T. ) ; +#72830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72831 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62943, #50102, #44370, #7141 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562813400, 0.001319946300100781000 ), + .UNSPECIFIED. ) ; +#72832 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72833 = CARTESIAN_POINT ( 'NONE', ( -13.28571428571426900, 12.17681279774499700, -28.70555803802994200 ) ) ; +#72834 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999626100, 84.13556610137287400, -28.54207364681974800 ) ) ; +#72835 = ORIENTED_EDGE ( 'NONE', *, *, #21784, .T. ) ; +#72836 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71926, #28438, #40900, #3618 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.006877718201233444500, 0.007639752840043655800 ), + .UNSPECIFIED. ) ; +#72837 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#72838 = ADVANCED_FACE ( 'NONE', ( #27557 ), #42110, .F. ) ; +#72839 = CONICAL_SURFACE ( 'NONE', #2665, 10.00000000000009600, 0.7853981633974447300 ) ; +#72840 = AXIS2_PLACEMENT_3D ( 'NONE', #38447, #51204, #63525 ) ; +#72841 = ORIENTED_EDGE ( 'NONE', *, *, #20234, .T. ) ; +#72843 = ORIENTED_EDGE ( 'NONE', *, *, #4458, .F. ) ; +#72842 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#72844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72845 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72846 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 66.66666666666664300, -10.73183747965883100 ) ) ; +#72847 = ORIENTED_EDGE ( 'NONE', *, *, #30182, .F. ) ; +#72848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7951, #32715, #14227, #57735 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207976504600E-007, 0.0008724366121406935800 ), + .UNSPECIFIED. ) ; +#72849 = CIRCLE ( 'NONE', #30795, 9.500000000000099500 ) ; +#72850 = ADVANCED_FACE ( 'NONE', ( #62583 ), #9007, .F. ) ; +#72851 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 31.83333333333334300, 3.794441961969996900 ) ) ; +#72852 = AXIS2_PLACEMENT_3D ( 'NONE', #76517, #45475, #33014 ) ; +#72853 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471847400, 20.46868088498121800, -28.51286550264509900 ) ) ; +#72854 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12283, #55760, #68285, #74556 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656171294200, 0.001370301364302646000 ), + .UNSPECIFIED. ) ; +#72855 = ORIENTED_EDGE ( 'NONE', *, *, #18074, .T. ) ; +#72856 = CARTESIAN_POINT ( 'NONE', ( 2.769169305343038600, 60.94992009694571800, -28.43638873268704600 ) ) ; +#72857 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, -3.166666666666655000, 6.794441961969992500 ) ) ; +#72858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72859 = CONICAL_SURFACE ( 'NONE', #46813, 10.00000000000009200, 0.7853981633974447300 ) ; +#72860 = EDGE_LOOP ( 'NONE', ( #51832, #13699, #34055, #22089 ) ) ; +#72861 = CARTESIAN_POINT ( 'NONE', ( -7.992829646542845400, 44.45000000000006000, -6.029677495840577000 ) ) ; +#72862 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 34.16666666666668600, -12.20555803803000000 ) ) ; +#72863 = CARTESIAN_POINT ( 'NONE', ( -4.191523101122140100, 20.02667319908792400, -28.37233769390153500 ) ) ; +#72864 = EDGE_LOOP ( 'NONE', ( #42289, #28287, #923 ) ) ; +#72865 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555683800, 89.72166103827329700, -28.53892303408230200 ) ) ; +#72866 = EDGE_LOOP ( 'NONE', ( #18259, #48510, #26847, #9186 ) ) ; +#72867 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567144700, 39.35339758437810100, -28.20555803802995200 ) ) ; +#72868 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72869 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72870 = ADVANCED_FACE ( 'NONE', ( #49901 ), #13315, .T. ) ; +#72871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72872 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655690400, 49.42298334620756600, -28.20555803802997400 ) ) ; +#72873 = CARTESIAN_POINT ( 'NONE', ( 23.65502873945849800, 5.672731645654296900, -23.72288308157708800 ) ) ; +#72874 = FACE_OUTER_BOUND ( 'NONE', #31992, .T. ) ; +#72875 = CARTESIAN_POINT ( 'NONE', ( -8.472335600148632300, 36.00238095238077600, -28.70555803802995200 ) ) ; +#72876 = CARTESIAN_POINT ( 'NONE', ( -9.545825865795293900, 94.27944769779141200, -28.35118195858155900 ) ) ; +#72877 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72878 = CIRCLE ( 'NONE', #454, 10.00000000000009200 ) ; +#72879 = EDGE_CURVE ( 'NONE', #9750, #38345, #36421, .T. ) ; +#72880 = ORIENTED_EDGE ( 'NONE', *, *, #18484, .F. ) ; +#72881 = ORIENTED_EDGE ( 'NONE', *, *, #62037, .F. ) ; +#72882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72884 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#72885 = EDGE_CURVE ( 'NONE', #71496, #13305, #58671, .T. ) ; +#72886 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68203, #24699, #74483, #37170 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003299945329126262600, 0.001108409907889974900 ), + .UNSPECIFIED. ) ; +#72887 = VECTOR ( 'NONE', #58118, 1000.000000000000000 ) ; +#72888 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999997200, 82.18315603019286200, -28.70555803802999500 ) ) ; +#72890 = EDGE_LOOP ( 'NONE', ( #21906, #34251, #22401, #63562, #63974 ) ) ; +#72889 = EDGE_CURVE ( 'NONE', #33406, #67505, #21975, .T. ) ; +#72891 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 41.61077422949657000, -28.37255355648634800 ) ) ; +#72892 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051542200, 70.58127875436079500, -28.53757464917570600 ) ) ; +#72893 = FACE_OUTER_BOUND ( 'NONE', #52329, .T. ) ; +#72894 = ORIENTED_EDGE ( 'NONE', *, *, #73126, .T. ) ; +#72895 = AXIS2_PLACEMENT_3D ( 'NONE', #14445, #57951, #20704 ) ; +#72896 = ORIENTED_EDGE ( 'NONE', *, *, #29817, .F. ) ; +#72897 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 37.66666666666667100, 2.794441961969992100 ) ) ; +#72898 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567140300, 9.746602415621863400, -28.20555803803009500 ) ) ; +#72899 = ORIENTED_EDGE ( 'NONE', *, *, #51966, .T. ) ; +#72900 = CARTESIAN_POINT ( 'NONE', ( 2.219797288042487000, 48.50972971738993800, -28.70555803802998800 ) ) ; +#72901 = CONICAL_SURFACE ( 'NONE', #45435, 10.50000000000009600, 0.7853981633974500600 ) ; +#72902 = ORIENTED_EDGE ( 'NONE', *, *, #15497, .F. ) ; +#72904 = ORIENTED_EDGE ( 'NONE', *, *, #25130, .F. ) ; +#72903 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#72905 = ORIENTED_EDGE ( 'NONE', *, *, #21801, .T. ) ; +#72906 = ORIENTED_EDGE ( 'NONE', *, *, #74441, .T. ) ; +#72907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72909 = ORIENTED_EDGE ( 'NONE', *, *, #10847, .T. ) ; +#72908 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552800, 61.49769010897077900, -28.61774594594320900 ) ) ; +#72910 = AXIS2_PLACEMENT_3D ( 'NONE', #40071, #46296, #77352 ) ; +#72911 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385209100, 49.49322649091141800, -28.30799595738881900 ) ) ; +#72912 = CARTESIAN_POINT ( 'NONE', ( -9.461440973572999600, 57.14999999999998400, -1.208515801746337800 ) ) ; +#72913 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#72914 = EDGE_CURVE ( 'NONE', #50917, #40985, #7490, .T. ) ; +#72915 = EDGE_CURVE ( 'NONE', #3945, #1060, #73843, .T. ) ; +#72916 = AXIS2_PLACEMENT_3D ( 'NONE', #57137, #44548, #7333 ) ; +#72917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72918 = ORIENTED_EDGE ( 'NONE', *, *, #45669, .T. ) ; +#72919 = FACE_OUTER_BOUND ( 'NONE', #36964, .T. ) ; +#72920 = ORIENTED_EDGE ( 'NONE', *, *, #50945, .F. ) ; +#72921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72922 = ORIENTED_EDGE ( 'NONE', *, *, #37748, .F. ) ; +#72923 = VERTEX_POINT ( 'NONE', #63630 ) ; +#72924 = ORIENTED_EDGE ( 'NONE', *, *, #39010, .F. ) ; +#72925 = ORIENTED_EDGE ( 'NONE', *, *, #30601, .T. ) ; +#72926 = CARTESIAN_POINT ( 'NONE', ( -22.80347686055973700, 6.098262120697175900, -24.95903976949953300 ) ) ; +#72927 = CARTESIAN_POINT ( 'NONE', ( 15.02626848327762800, 75.71754128061461100, -28.70555803803001600 ) ) ; +#72928 = CIRCLE ( 'NONE', #57827, 10.50000000000009600 ) ; +#72929 = EDGE_CURVE ( 'NONE', #9002, #11958, #59371, .T. ) ; +#72930 = AXIS2_PLACEMENT_3D ( 'NONE', #61195, #36403, #79957 ) ; +#72931 = AXIS2_PLACEMENT_3D ( 'NONE', #9580, #59366, #46821 ) ; +#72932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #772, #38029, #13322, #56824 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055018276984628300E-007, 0.0007677744771234645800 ), + .UNSPECIFIED. ) ; +#72933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72935 = ORIENTED_EDGE ( 'NONE', *, *, #69417, .F. ) ; +#72936 = ADVANCED_FACE ( 'NONE', ( #25606 ), #23657, .T. ) ; +#72937 = CONICAL_SURFACE ( 'NONE', #64027, 10.50000000000009600, 0.7853981633974518300 ) ; +#72938 = ORIENTED_EDGE ( 'NONE', *, *, #33332, .F. ) ; +#72939 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42950, #67728, #11980, #55472 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392203916400E-007, 0.0003301092607755739700 ), + .UNSPECIFIED. ) ; +#72940 = AXIS2_PLACEMENT_3D ( 'NONE', #5815, #24321, #50378 ) ; +#72941 = ORIENTED_EDGE ( 'NONE', *, *, #64926, .F. ) ; +#72942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72943 = VERTEX_POINT ( 'NONE', #57610 ) ; +#72944 = ADVANCED_FACE ( 'NONE', ( #56725 ), #71316, .F. ) ; +#72945 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 6.166666666666678500, -2.545304000185620600 ) ) ; +#72946 = CARTESIAN_POINT ( 'NONE', ( -2.487278546916905000, 51.47860033657566000, -28.56001054660905700 ) ) ; +#72947 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510361600, 28.65930907398620100, -28.35186440610856500 ) ) ; +#72948 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 46.33333333333333600, -5.205558038030008400 ) ) ; +#72949 = AXIS2_PLACEMENT_3D ( 'NONE', #78327, #66085, #53563 ) ; +#72950 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#72951 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000400, 57.14999999999999900, -18.70555803802999200 ) ) ; +#72952 = FACE_OUTER_BOUND ( 'NONE', #24155, .T. ) ; +#72953 = ADVANCED_FACE ( 'NONE', ( #40169 ), #38205, .F. ) ; +#72954 = FACE_OUTER_BOUND ( 'NONE', #14813, .T. ) ; +#72955 = ORIENTED_EDGE ( 'NONE', *, *, #38883, .F. ) ; +#72956 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451033300, 41.44069092601377900, -28.35186440610859600 ) ) ; +#72957 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007800, 36.94142842854304100, -28.20555803802995200 ) ) ; +#72958 = AXIS2_PLACEMENT_3D ( 'NONE', #61558, #24282, #67799 ) ; +#72959 = EDGE_LOOP ( 'NONE', ( #6830, #21382, #25437, #36621 ) ) ; +#72960 = ADVANCED_FACE ( 'NONE', ( #44039 ), #5140, .F. ) ; +#72961 = EDGE_CURVE ( 'NONE', #11576, #47662, #21708, .T. ) ; +#72962 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72963 = CIRCLE ( 'NONE', #35254, 10.50000000000009200 ) ; +#72965 = ORIENTED_EDGE ( 'NONE', *, *, #63225, .F. ) ; +#72964 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188424700, 18.20564881207717200, -28.41114655922361700 ) ) ; +#72966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72967 = CIRCLE ( 'NONE', #19782, 9.500000000000097700 ) ; +#72968 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72969 = ORIENTED_EDGE ( 'NONE', *, *, #35493, .F. ) ; +#72970 = ORIENTED_EDGE ( 'NONE', *, *, #31011, .F. ) ; +#72971 = AXIS2_PLACEMENT_3D ( 'NONE', #79177, #41874, #4623 ) ; +#72972 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72973 = CIRCLE ( 'NONE', #19390, 10.00000000000009600 ) ; +#72974 = EDGE_LOOP ( 'NONE', ( #73756, #78973, #59234 ) ) ; +#72975 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#72976 = ORIENTED_EDGE ( 'NONE', *, *, #72552, .T. ) ; +#72977 = ORIENTED_EDGE ( 'NONE', *, *, #60960, .F. ) ; +#72978 = ORIENTED_EDGE ( 'NONE', *, *, #45320, .F. ) ; +#72979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72980 = EDGE_LOOP ( 'NONE', ( #53653, #33950, #27693 ) ) ; +#72981 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#72982 = ORIENTED_EDGE ( 'NONE', *, *, #54766, .F. ) ; +#72983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72984 = CARTESIAN_POINT ( 'NONE', ( -17.70918219830878500, 71.64954451135936600, -28.33400579219035700 ) ) ; +#72985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72986 = EDGE_LOOP ( 'NONE', ( #78486, #11858, #68088, #38487 ) ) ; +#72987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72989 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24881, #68658, #6631, #50117 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799643301500E-007, 0.0005050252131287529100 ), + .UNSPECIFIED. ) ; +#72990 = CARTESIAN_POINT ( 'NONE', ( -2.219797288042492800, 42.59027028261002800, -28.70555803802999500 ) ) ; +#72991 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#72992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#72993 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343284300, 9.746602415621378400, -28.20555803803042500 ) ) ; +#72994 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72995 = FACE_OUTER_BOUND ( 'NONE', #63323, .T. ) ; +#72996 = ORIENTED_EDGE ( 'NONE', *, *, #19013, .T. ) ; +#72998 = EDGE_CURVE ( 'NONE', #43133, #72160, #73293, .T. ) ; +#72997 = EDGE_LOOP ( 'NONE', ( #44090, #61585, #35149, #4995 ) ) ; +#72999 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404300, 28.42298334620739900, -28.20555803802994500 ) ) ; +#73000 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188356700, 20.39435118792235000, -28.41114655922298800 ) ) ; +#73001 = ORIENTED_EDGE ( 'NONE', *, *, #8734, .T. ) ; +#73002 = ORIENTED_EDGE ( 'NONE', *, *, #78737, .T. ) ; +#73003 = EDGE_CURVE ( 'NONE', #39371, #5350, #7062, .T. ) ; +#73004 = EDGE_LOOP ( 'NONE', ( #5048, #59861, #54704 ) ) ; +#73005 = ORIENTED_EDGE ( 'NONE', *, *, #27758, .T. ) ; +#73006 = CARTESIAN_POINT ( 'NONE', ( 2.668959489915053500, 90.78519534244644300, -28.53901988778293800 ) ) ; +#73007 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456110300, 90.07527064970109600, -28.39317435246134000 ) ) ; +#73008 = CIRCLE ( 'NONE', #15509, 10.50000000000009600 ) ; +#73009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73010 = CARTESIAN_POINT ( 'NONE', ( -16.72524054195350400, 31.41634594406195900, -28.35038903107271900 ) ) ; +#73011 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019283600, 64.79999999999999700, -28.70555803802997700 ) ) ; +#73012 = ORIENTED_EDGE ( 'NONE', *, *, #7055, .T. ) ; +#73013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73014 = EDGE_CURVE ( 'NONE', #73931, #33159, #44858, .T. ) ; +#73015 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73016 = ORIENTED_EDGE ( 'NONE', *, *, #18174, .T. ) ; +#73017 = EDGE_CURVE ( 'NONE', #28190, #9809, #30481, .T. ) ; +#73018 = AXIS2_PLACEMENT_3D ( 'NONE', #11283, #29811, #48226 ) ; +#73019 = FACE_OUTER_BOUND ( 'NONE', #53349, .T. ) ; +#73020 = EDGE_LOOP ( 'NONE', ( #61512, #70025, #7369 ) ) ; +#73021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70651, #8342, #39650, #2364 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.626360489736106800E-017, 0.001871986839425858600 ), + .UNSPECIFIED. ) ; +#73022 = VERTEX_POINT ( 'NONE', #76913 ) ; +#73023 = EDGE_LOOP ( 'NONE', ( #62370, #56691, #20137, #8878 ) ) ; +#73024 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 52.33333333333334300, 5.722645192245503900 ) ) ; +#73025 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#73026 = AXIS2_PLACEMENT_3D ( 'NONE', #31958, #75200, #75468 ) ; +#73027 = EDGE_CURVE ( 'NONE', #80699, #76892, #15994, .T. ) ; +#73028 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#73029 = EDGE_CURVE ( 'NONE', #74091, #68330, #1506, .T. ) ; +#73030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73031 = EDGE_CURVE ( 'NONE', #39312, #36626, #54762, .T. ) ; +#73032 = ADVANCED_FACE ( 'NONE', ( #69357 ), #67433, .F. ) ; +#73033 = AXIS2_PLACEMENT_3D ( 'NONE', #39268, #2006, #45492 ) ; +#73034 = FACE_OUTER_BOUND ( 'NONE', #16700, .T. ) ; +#73035 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 30.96868088498121800, -28.51286550264512000 ) ) ; +#73036 = ORIENTED_EDGE ( 'NONE', *, *, #9867, .F. ) ; +#73037 = ORIENTED_EDGE ( 'NONE', *, *, #33049, .T. ) ; +#73038 = EDGE_CURVE ( 'NONE', #51553, #34889, #19747, .T. ) ; +#73039 = ADVANCED_FACE ( 'NONE', ( #75228 ), #17794, .T. ) ; +#73040 = AXIS2_PLACEMENT_3D ( 'NONE', #66326, #29112, #72591 ) ; +#73041 = AXIS2_PLACEMENT_3D ( 'NONE', #55963, #62247, #12469 ) ; +#73042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73043 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#73044 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 23.66666666666668600, -6.705558038030000400 ) ) ; +#73045 = FACE_OUTER_BOUND ( 'NONE', #53285, .T. ) ; +#73046 = ORIENTED_EDGE ( 'NONE', *, *, #77897, .T. ) ; +#73047 = EDGE_LOOP ( 'NONE', ( #79908, #52793, #14389 ) ) ; +#73048 = CARTESIAN_POINT ( 'NONE', ( -17.40084336938112100, 51.69277301236456200, -28.41361853548543300 ) ) ; +#73049 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263270500, 24.54999999999995500, -28.70555803802994200 ) ) ; +#73050 = ADVANCED_FACE ( 'NONE', ( #52807 ), #65506, .F. ) ; +#73051 = FACE_OUTER_BOUND ( 'NONE', #40253, .T. ) ; +#73052 = VERTEX_POINT ( 'NONE', #71468 ) ; +#73053 = ORIENTED_EDGE ( 'NONE', *, *, #40302, .T. ) ; +#73054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73055 = VERTEX_POINT ( 'NONE', #77711 ) ; +#73056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73057 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174866200, 80.16054007504448000, -28.34042301926892500 ) ) ; +#73058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73059 = EDGE_LOOP ( 'NONE', ( #32595, #64097, #40014, #29518, #55276 ) ) ; +#73060 = AXIS2_PLACEMENT_3D ( 'NONE', #45583, #51845, #2099 ) ; +#73061 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431800, 38.92298334620762300, -28.20555803802996700 ) ) ; +#73062 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35026, #72288, #78544, #41239 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679642088122600E-007, 0.0007596411030280268900 ), + .UNSPECIFIED. ) ; +#73063 = ADVANCED_FACE ( 'NONE', ( #60660 ), #32371, .F. ) ; +#73064 = CARTESIAN_POINT ( 'NONE', ( -20.31515592892578700, 101.5906804567335200, -19.15134935316995900 ) ) ; +#73065 = AXIS2_PLACEMENT_3D ( 'NONE', #51393, #1650, #57694 ) ; +#73066 = ORIENTED_EDGE ( 'NONE', *, *, #56053, .T. ) ; +#73067 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217464600, 60.16054007504464400, -28.34042301926885400 ) ) ; +#73068 = CONICAL_SURFACE ( 'NONE', #59909, 10.50000000000009600, 0.7853981633974500600 ) ; +#73069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73070 = ORIENTED_EDGE ( 'NONE', *, *, #20354, .F. ) ; +#73071 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 58.16666666666667100, -2.545304000185620600 ) ) ; +#73072 = VERTEX_POINT ( 'NONE', #15714 ) ; +#73073 = CARTESIAN_POINT ( 'NONE', ( 19.09195979516171000, 1.816080409676362800, -24.48497144683608100 ) ) ; +#73074 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .T. ) ; +#73075 = VERTEX_POINT ( 'NONE', #21967 ) ; +#73076 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73077 = ORIENTED_EDGE ( 'NONE', *, *, #41632, .T. ) ; +#73078 = ORIENTED_EDGE ( 'NONE', *, *, #12953, .T. ) ; +#73079 = AXIS2_PLACEMENT_3D ( 'NONE', #29637, #73136, #35859 ) ; +#73080 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73081 = CONICAL_SURFACE ( 'NONE', #20163, 10.00000000000009400, 0.7853981633974447300 ) ; +#73082 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343277900, 49.85339758437807900, -28.20555803802996700 ) ) ; +#73083 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#73084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73085 = AXIS2_PLACEMENT_3D ( 'NONE', #74673, #37369, #121 ) ; +#73086 = VERTEX_POINT ( 'NONE', #9438 ) ; +#73087 = CARTESIAN_POINT ( 'NONE', ( 15.16958695401591800, 44.19875723892622000, -28.70555803803001600 ) ) ; +#73088 = CARTESIAN_POINT ( 'NONE', ( -6.852157730108388000E-014, 43.65857157145693900, -28.20555803802997700 ) ) ; +#73089 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 59.81066373133501200, -28.53923937255172300 ) ) ; +#73090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73091 = CARTESIAN_POINT ( 'NONE', ( 10.57226108320770000, 8.799999999999503300, -28.63329695482264000 ) ) ; +#73092 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519700, 75.79999999999982700, -28.63843632546337800 ) ) ; +#73093 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#73094 = AXIS2_PLACEMENT_3D ( 'NONE', #67533, #36497, #24022 ) ; +#73095 = FACE_OUTER_BOUND ( 'NONE', #27967, .T. ) ; +#73096 = VERTEX_POINT ( 'NONE', #27988 ) ; +#73097 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#73098 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73099 = CARTESIAN_POINT ( 'NONE', ( -6.079006772786334200, 44.44999999999998900, 3.994987765673467400 ) ) ; +#73100 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543300, 29.49920551340399300, -28.70555803802994200 ) ) ; +#73101 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.68929190448941200, -28.20555803802995200 ) ) ; +#73102 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000427200, 16.39962244433171500, -28.53664883431631700 ) ) ; +#73103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73104 = EDGE_CURVE ( 'NONE', #51858, #30178, #50832, .T. ) ; +#73105 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752900, 38.00972971738994500, -28.70555803802995600 ) ) ; +#73106 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 38.91070809551056400, -28.20555803802995200 ) ) ; +#73107 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339058100, 60.13716795162658700, -28.48697406221668200 ) ) ; +#73108 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 64.50000000000001400, 6.847000845227646500 ) ) ; +#73109 = EDGE_CURVE ( 'NONE', #74319, #65707, #67848, .T. ) ; +#73110 = ORIENTED_EDGE ( 'NONE', *, *, #80079, .F. ) ; +#73111 = ORIENTED_EDGE ( 'NONE', *, *, #13710, .F. ) ; +#73112 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25167, #18899, #56149, #31432 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799619383900E-007, 0.0005050252131287126900 ), + .UNSPECIFIED. ) ; +#73113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73114 = ORIENTED_EDGE ( 'NONE', *, *, #21182, .F. ) ; +#73115 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 29.66666666666667100, -5.535685056952199400 ) ) ; +#73116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73118 = EDGE_CURVE ( 'NONE', #17938, #61281, #53380, .T. ) ; +#73119 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171147300, 40.45593345534906100, -28.57107744631858600 ) ) ; +#73120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73121 = EDGE_CURVE ( 'NONE', #66775, #16236, #38885, .T. ) ; +#73122 = CIRCLE ( 'NONE', #58575, 10.00000000000009200 ) ; +#73123 = ORIENTED_EDGE ( 'NONE', *, *, #75562, .F. ) ; +#73124 = VERTEX_POINT ( 'NONE', #72027 ) ; +#73125 = EDGE_CURVE ( 'NONE', #30658, #55143, #24472, .T. ) ; +#73126 = EDGE_CURVE ( 'NONE', #12367, #54160, #10007, .T. ) ; +#73127 = CARTESIAN_POINT ( 'NONE', ( -8.454318248548847900, 44.45000000000001000, 1.425712714279866500 ) ) ; +#73128 = CARTESIAN_POINT ( 'NONE', ( 3.691886274583927800, 50.08874248361072300, -28.53740755999537600 ) ) ; +#73129 = FACE_OUTER_BOUND ( 'NONE', #58070, .T. ) ; +#73130 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 32.00000000000000700, 9.794441961969996100 ) ) ; +#73131 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428641300, 28.57141756547896300, -28.70555803802994200 ) ) ; +#73132 = EDGE_LOOP ( 'NONE', ( #45151, #66966, #70083 ) ) ; +#73133 = EDGE_LOOP ( 'NONE', ( #33417, #60495, #20127, #7228, #7402 ) ) ; +#73134 = EDGE_LOOP ( 'NONE', ( #2786, #14202, #52982, #80480 ) ) ; +#73135 = CARTESIAN_POINT ( 'NONE', ( -4.561944296567988400, 18.11613305479827200, -28.57723854182873100 ) ) ; +#73136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73137 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .F. ) ; +#73138 = ORIENTED_EDGE ( 'NONE', *, *, #40954, .F. ) ; +#73139 = AXIS2_PLACEMENT_3D ( 'NONE', #12133, #18384, #42848 ) ; +#73140 = CONICAL_SURFACE ( 'NONE', #453, 10.50000000000009600, 0.7853981633974500600 ) ; +#73141 = EDGE_CURVE ( 'NONE', #43957, #24535, #76299, .T. ) ; +#73142 = CARTESIAN_POINT ( 'NONE', ( 16.22752675111647800, 50.48802503217734000, -28.63207404200746400 ) ) ; +#73143 = EDGE_CURVE ( 'NONE', #45253, #34797, #48890, .T. ) ; +#73144 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 49.66749699759768100, -28.20555803802996700 ) ) ; +#73145 = EDGE_CURVE ( 'NONE', #70227, #73931, #61871, .T. ) ; +#73146 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469300, 14.05000000000000600, -28.20555803802992800 ) ) ; +#73147 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#73148 = CARTESIAN_POINT ( 'NONE', ( 20.88024218210183500, 7.060053508687392600, -26.79535995692810600 ) ) ; +#73149 = FACE_OUTER_BOUND ( 'NONE', #38276, .T. ) ; +#73150 = AXIS2_PLACEMENT_3D ( 'NONE', #21145, #64669, #27403 ) ; +#73151 = ORIENTED_EDGE ( 'NONE', *, *, #71400, .T. ) ; +#73152 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999945800, 71.96823913367190100, -28.70555803803014400 ) ) ; +#73153 = ORIENTED_EDGE ( 'NONE', *, *, #28382, .F. ) ; +#73154 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#73155 = EDGE_LOOP ( 'NONE', ( #299, #67292, #7588, #5729 ) ) ; +#73156 = VERTEX_POINT ( 'NONE', #47760 ) ; +#73157 = EDGE_LOOP ( 'NONE', ( #45932, #57468, #11393, #9753 ) ) ; +#73158 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73159 = CARTESIAN_POINT ( 'NONE', ( 19.20520100076300500, 100.0105786307746600, -24.11680086864270600 ) ) ; +#73160 = ORIENTED_EDGE ( 'NONE', *, *, #8743, .T. ) ; +#73161 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825388200, 81.43945992495515900, -28.34042301926901400 ) ) ; +#73162 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#73163 = ADVANCED_FACE ( 'NONE', ( #36276 ), #47476, .T. ) ; +#73164 = CIRCLE ( 'NONE', #69114, 10.50000000000009900 ) ; +#73165 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #6618, #37606 ) ; +#73166 = CARTESIAN_POINT ( 'NONE', ( 11.76690734369020500, 85.79999999999950000, -28.70555803803047500 ) ) ; +#73167 = AXIS2_PLACEMENT_3D ( 'NONE', #70384, #33134, #76635 ) ; +#73168 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 18.36203212531321700, -28.38801640354855800 ) ) ; +#73169 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35518, #79038, #4483, #47971 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002731704160284259400, 0.0006028148015507194800 ), + .UNSPECIFIED. ) ; +#73170 = ADVANCED_FACE ( 'NONE', ( #1224 ), #30458, .T. ) ; +#73171 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655600300, 28.42298334620759400, -28.20555803802994500 ) ) ; +#73172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73173 = CARTESIAN_POINT ( 'NONE', ( 18.01246063274328800, 81.29377171558717000, -28.24172590004390300 ) ) ; +#73174 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 35.50000000000000700, -7.061964498581016200 ) ) ; +#73175 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73176 = FACE_OUTER_BOUND ( 'NONE', #70326, .T. ) ; +#73177 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428627600, 20.52858243452102700, -28.70555803802995200 ) ) ; +#73178 = EDGE_LOOP ( 'NONE', ( #1722, #71477, #76254, #8703, #53483, #33543 ) ) ; +#73179 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44429, #949, #57007, #19738 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354559179500E-007, 0.0007670609591623406600 ), + .UNSPECIFIED. ) ; +#73180 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 31.12753447840887200, -28.38801640354855500 ) ) ; +#73181 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74982, #436, #31740, #75250 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471652208440900E-007, 0.0002673661813022178100 ), + .UNSPECIFIED. ) ; +#73182 = AXIS2_PLACEMENT_3D ( 'NONE', #13234, #50419, #44158 ) ; +#73183 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73185 = CARTESIAN_POINT ( 'NONE', ( -7.000512866619794200, 57.14999999999999900, -7.624422141159004500 ) ) ; +#73186 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41520, #78814, #47758, #10527 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318593485500, 0.001296017758341079400 ), + .UNSPECIFIED. ) ; +#73187 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999963800, 84.37738371066720300, -28.70555803803047500 ) ) ; +#73188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73189 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171908400, 70.46231468379647800, -28.37082013777854400 ) ) ; +#73190 = EDGE_CURVE ( 'NONE', #67444, #20371, #47352, .T. ) ; +#73191 = ORIENTED_EDGE ( 'NONE', *, *, #47448, .T. ) ; +#73192 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 5.000000000000000000, -18.70555803803001300 ) ) ; +#73193 = AXIS2_PLACEMENT_3D ( 'NONE', #61317, #24035, #67543 ) ; +#73194 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#73195 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .T. ) ; +#73196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73197 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034400, 18.15930907398619400, -28.35186440610855000 ) ) ; +#73198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73199 = FACE_OUTER_BOUND ( 'NONE', #79762, .T. ) ; +#73200 = VERTEX_POINT ( 'NONE', #17060 ) ; +#73201 = AXIS2_PLACEMENT_3D ( 'NONE', #12472, #55966, #18722 ) ; +#73202 = ORIENTED_EDGE ( 'NONE', *, *, #2205, .T. ) ; +#73203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73204 = ORIENTED_EDGE ( 'NONE', *, *, #44359, .F. ) ; +#73205 = CIRCLE ( 'NONE', #8293, 10.00000000000009200 ) ; +#73206 = EDGE_LOOP ( 'NONE', ( #54775, #22319, #36826, #58073 ) ) ; +#73207 = EDGE_LOOP ( 'NONE', ( #40973, #7348, #51532, #22338 ) ) ; +#73208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73209 = VERTEX_POINT ( 'NONE', #41779 ) ; +#73210 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 4.000000000000006200, -1.205558038030002800 ) ) ; +#73211 = ORIENTED_EDGE ( 'NONE', *, *, #74202, .T. ) ; +#73212 = AXIS2_PLACEMENT_3D ( 'NONE', #50370, #13182, #56667 ) ; +#73213 = FACE_OUTER_BOUND ( 'NONE', #22260, .T. ) ; +#73214 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73215 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6386, #43617, #12661, #56143 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318544711600, 0.001319946300099576100 ), + .UNSPECIFIED. ) ; +#73216 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 67.70389005397397900, -28.37519436813180500 ) ) ; +#73217 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 44.16666666666668600, 0.9380355014189834000 ) ) ; +#73218 = ORIENTED_EDGE ( 'NONE', *, *, #36767, .F. ) ; +#73219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73220 = CIRCLE ( 'NONE', #5086, 10.50000000000009600 ) ; +#73221 = EDGE_CURVE ( 'NONE', #39861, #40802, #3167, .T. ) ; +#73222 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .T. ) ; +#73223 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919931200, 41.22294471194861400, -28.20555803802997700 ) ) ; +#73224 = EDGE_LOOP ( 'NONE', ( #60901, #47036, #63575, #79212, #50200, #38452 ) ) ; +#73225 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 9.333333333333346400, -5.205558038030008400 ) ) ; +#73226 = ORIENTED_EDGE ( 'NONE', *, *, #12215, .F. ) ; +#73227 = CARTESIAN_POINT ( 'NONE', ( -9.279233496942035600, 90.09951448976264000, -28.63282631410026000 ) ) ; +#73228 = FACE_OUTER_BOUND ( 'NONE', #44212, .T. ) ; +#73229 = ORIENTED_EDGE ( 'NONE', *, *, #70233, .T. ) ; +#73230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73231 = FACE_OUTER_BOUND ( 'NONE', #29305, .T. ) ; +#73232 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#73233 = ADVANCED_FACE ( 'NONE', ( #63552 ), #61590, .T. ) ; +#73234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73235 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#73236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#73237 = EDGE_CURVE ( 'NONE', #39773, #73052, #32927, .T. ) ; +#73238 = EDGE_CURVE ( 'NONE', #5527, #5611, #15832, .T. ) ; +#73239 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707759600, 17.93589406416697700, -28.68054222049975300 ) ) ; +#73240 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.20555803802997700 ) ) ; +#73241 = CIRCLE ( 'NONE', #1788, 10.00000000000009400 ) ; +#73242 = ORIENTED_EDGE ( 'NONE', *, *, #79220, .T. ) ; +#73243 = CARTESIAN_POINT ( 'NONE', ( 17.11467148217490200, 71.43945992495501700, -28.34042301926910700 ) ) ; +#73244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73245 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174749000, 51.43945992495533700, -28.34042301926881200 ) ) ; +#73246 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 85.92347538298000100, -28.70555803802997700 ) ) ; +#73247 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966300, 30.94069092601379400, -28.35186440610857500 ) ) ; +#73248 = ADVANCED_FACE ( 'NONE', ( #78112 ), #11946, .F. ) ; +#73249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73251 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528150900, 41.46868088498121800, -28.51286550264512700 ) ) ; +#73252 = AXIS2_PLACEMENT_3D ( 'NONE', #53459, #16207, #59734 ) ; +#73253 = EDGE_CURVE ( 'NONE', #59550, #42613, #18477, .T. ) ; +#73254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73255 = EDGE_CURVE ( 'NONE', #52008, #50347, #4005, .T. ) ; +#73256 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000003700, 11.93454006867175300, -28.70555803802998100 ) ) ; +#73257 = EDGE_CURVE ( 'NONE', #2754, #72320, #28530, .T. ) ; +#73258 = CARTESIAN_POINT ( 'NONE', ( -15.02627602454275100, 55.88244694415099900, -28.70555803803001600 ) ) ; +#73259 = CARTESIAN_POINT ( 'NONE', ( 16.87500833473034900, 71.58737389638845600, -28.29936525552462000 ) ) ; +#73260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73261 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73262 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547400, 70.16054007504448000, -28.34042301926906000 ) ) ; +#73263 = AXIS2_PLACEMENT_3D ( 'NONE', #70732, #58225, #45677 ) ; +#73264 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655948500, 49.42298334620738800, -28.20555803802997400 ) ) ; +#73265 = PLANE ( 'NONE', #39273 ) ; +#73266 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#73267 = ORIENTED_EDGE ( 'NONE', *, *, #18798, .F. ) ; +#73268 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660888200, 80.13716795162605400, -28.48697406221736400 ) ) ; +#73269 = ORIENTED_EDGE ( 'NONE', *, *, #12597, .T. ) ; +#73270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73271 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73272 = AXIS2_PLACEMENT_3D ( 'NONE', #15752, #59267, #22013 ) ; +#73273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73275 = AXIS2_PLACEMENT_3D ( 'NONE', #27191, #70406, #20930 ) ; +#73276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73278 = ADVANCED_FACE ( 'NONE', ( #13892 ), #26556, .F. ) ; +#73279 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68209, #30702, #37179, #80724 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001560099667572897600, 0.0008043487657983573200 ), + .UNSPECIFIED. ) ; +#73280 = FACE_OUTER_BOUND ( 'NONE', #42593, .T. ) ; +#73281 = ORIENTED_EDGE ( 'NONE', *, *, #34383, .T. ) ; +#73282 = FACE_OUTER_BOUND ( 'NONE', #4644, .T. ) ; +#73283 = ORIENTED_EDGE ( 'NONE', *, *, #18557, .F. ) ; +#73284 = FACE_OUTER_BOUND ( 'NONE', #7659, .T. ) ; +#73285 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#73286 = VERTEX_POINT ( 'NONE', #67626 ) ; +#73287 = EDGE_LOOP ( 'NONE', ( #50982, #27379, #41879, #14801 ) ) ; +#73288 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 50.16666666666667900, -9.205558038030003900 ) ) ; +#73289 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260876000, 90.20034312068746400, -28.70555803803001300 ) ) ; +#73290 = AXIS2_PLACEMENT_3D ( 'NONE', #48988, #11786, #5515 ) ; +#73291 = EDGE_CURVE ( 'NONE', #25276, #15552, #70317, .T. ) ; +#73292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40666, #15932, #59459, #22192 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823691929759000E-007, 0.0008724363063894139300 ), + .UNSPECIFIED. ) ; +#73293 = CIRCLE ( 'NONE', #13947, 10.50000000000009600 ) ; +#73294 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#73295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73296 = ORIENTED_EDGE ( 'NONE', *, *, #44357, .F. ) ; +#73297 = VECTOR ( 'NONE', #79495, 1000.000000000000000 ) ; +#73298 = ORIENTED_EDGE ( 'NONE', *, *, #75814, .T. ) ; +#73299 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73300 = EDGE_CURVE ( 'NONE', #17080, #23287, #46941, .T. ) ; +#73301 = EDGE_LOOP ( 'NONE', ( #26923, #41812, #48877 ) ) ; +#73302 = AXIS2_PLACEMENT_3D ( 'NONE', #1743, #14281, #51492 ) ; +#73303 = VERTEX_POINT ( 'NONE', #49086 ) ; +#73304 = CIRCLE ( 'NONE', #18391, 10.00000000000009200 ) ; +#73305 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818961900, 79.94924284854708700, -28.20555803802997700 ) ) ; +#73306 = ORIENTED_EDGE ( 'NONE', *, *, #17954, .T. ) ; +#73307 = FACE_OUTER_BOUND ( 'NONE', #68644, .T. ) ; +#73308 = CARTESIAN_POINT ( 'NONE', ( -4.656953934540438500, 59.08026449164336900, -28.70555803802997400 ) ) ; +#73309 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34720, #71994, #40963, #3680 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964114700, 0.0005839769583123669000 ), + .UNSPECIFIED. ) ; +#73310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73312 = CARTESIAN_POINT ( 'NONE', ( 10.96822196105233100, 81.31766786975315100, -28.25051428653882000 ) ) ; +#73313 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019301200, 76.79999999999962800, -28.70555803802997700 ) ) ; +#73314 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 21.50000000000000400, 6.847000845227641200 ) ) ; +#73315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73316 = VERTEX_POINT ( 'NONE', #73899 ) ; +#73317 = AXIS2_PLACEMENT_3D ( 'NONE', #59039, #9247, #34304 ) ; +#73318 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181919600, 61.65075715145310700, -28.20555803802997700 ) ) ; +#73319 = FACE_OUTER_BOUND ( 'NONE', #77193, .T. ) ; +#73320 = ORIENTED_EDGE ( 'NONE', *, *, #67969, .T. ) ; +#73321 = CONICAL_SURFACE ( 'NONE', #41444, 10.50000000000009600, 0.7853981633974500600 ) ; +#73322 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459548200, 79.08026449164334800, -28.70555803802997700 ) ) ; +#73323 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#73324 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725212400, 14.04999999999952800, -28.20555803803025800 ) ) ; +#73325 = AXIS2_PLACEMENT_3D ( 'NONE', #46988, #22279, #65813 ) ; +#73326 = ADVANCED_FACE ( 'NONE', ( #43050 ), #57653, .T. ) ; +#73327 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#73328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73330 = EDGE_CURVE ( 'NONE', #56323, #69715, #74247, .T. ) ; +#73331 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 56.00000000000000700, -1.205558038030002800 ) ) ; +#73332 = FACE_OUTER_BOUND ( 'NONE', #47314, .T. ) ; +#73333 = CARTESIAN_POINT ( 'NONE', ( 19.41230740457145000, 5.587692595428718400, -27.79708998677373800 ) ) ; +#73334 = CARTESIAN_POINT ( 'NONE', ( -16.81665446367276900, 6.893879557620969000, -28.20555803802992800 ) ) ; +#73335 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#73336 = VERTEX_POINT ( 'NONE', #80416 ) ; +#73337 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#73338 = ADVANCED_FACE ( 'NONE', ( #80070 ), #8007, .T. ) ; +#73339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#73341 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73342 = CARTESIAN_POINT ( 'NONE', ( 9.553492182972249200, 52.22511094383826000, -28.55192314908451200 ) ) ; +#73343 = VERTEX_POINT ( 'NONE', #24643 ) ; +#73344 = CARTESIAN_POINT ( 'NONE', ( 17.69483626079884400, 20.43383669612128300, -28.27375072930954400 ) ) ; +#73345 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #578, #68866, #25645, #69129 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001333132141653069600 ), + .UNSPECIFIED. ) ; +#73346 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239000, 81.43945992495534400, -28.34042301926881200 ) ) ; +#73347 = ORIENTED_EDGE ( 'NONE', *, *, #65067, .T. ) ; +#73348 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73350 = CONICAL_SURFACE ( 'NONE', #78257, 10.50000000000009600, 0.7853981633974500600 ) ; +#73351 = ORIENTED_EDGE ( 'NONE', *, *, #5698, .F. ) ; +#73352 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995707800, 13.11903418172686400, -28.69431509262337000 ) ) ; +#73353 = CIRCLE ( 'NONE', #13843, 10.00000000000009200 ) ; +#73354 = EDGE_CURVE ( 'NONE', #206, #54128, #41120, .T. ) ; +#73355 = ORIENTED_EDGE ( 'NONE', *, *, #21533, .T. ) ; +#73356 = CARTESIAN_POINT ( 'NONE', ( -15.32631446541102500, 23.40457788868502200, -28.70132697598340600 ) ) ; +#73357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73358 = ADVANCED_FACE ( 'NONE', ( #9980 ), #39135, .F. ) ; +#73359 = CONICAL_SURFACE ( 'NONE', #23036, 10.00000000000009200, 0.7853981633974415100 ) ; +#73360 = EDGE_CURVE ( 'NONE', #52754, #27173, #55694, .T. ) ; +#73362 = ORIENTED_EDGE ( 'NONE', *, *, #11064, .T. ) ; +#73361 = CARTESIAN_POINT ( 'NONE', ( -16.53469939396896000, 9.232650303015518000, -28.58709120703527900 ) ) ; +#73363 = ORIENTED_EDGE ( 'NONE', *, *, #62048, .T. ) ; +#73364 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73365 = ORIENTED_EDGE ( 'NONE', *, *, #44732, .F. ) ; +#73366 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#73367 = AXIS2_PLACEMENT_3D ( 'NONE', #72133, #34861, #78382 ) ; +#73368 = EDGE_CURVE ( 'NONE', #21831, #23125, #34339, .T. ) ; +#73369 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73370 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 15.94142842854265000, -28.20555803803025800 ) ) ; +#73371 = ADVANCED_FACE ( 'NONE', ( #72292 ), #62178, .F. ) ; +#73372 = CIRCLE ( 'NONE', #50811, 10.50000000000009600 ) ; +#73373 = EDGE_CURVE ( 'NONE', #26455, #20052, #55849, .T. ) ; +#73374 = ORIENTED_EDGE ( 'NONE', *, *, #40700, .T. ) ; +#73375 = AXIS2_PLACEMENT_3D ( 'NONE', #67618, #80120, #24110 ) ; +#73376 = CONICAL_SURFACE ( 'NONE', #49262, 10.00000000000009400, 0.7853981633974447300 ) ; +#73377 = ORIENTED_EDGE ( 'NONE', *, *, #28474, .F. ) ; +#73378 = CARTESIAN_POINT ( 'NONE', ( 12.13892652743364100, 8.993745444280927300, -28.65599007511346800 ) ) ; +#73379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73380 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 62.33333333333335000, -6.705558038030005700 ) ) ; +#73381 = ORIENTED_EDGE ( 'NONE', *, *, #40605, .T. ) ; +#73382 = ORIENTED_EDGE ( 'NONE', *, *, #64083, .F. ) ; +#73383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73384 = VERTEX_POINT ( 'NONE', #31450 ) ; +#73385 = FACE_OUTER_BOUND ( 'NONE', #42529, .T. ) ; +#73386 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 27.50000000000000700, 2.454695999814385600 ) ) ; +#73387 = AXIS2_PLACEMENT_3D ( 'NONE', #12227, #55714, #18471 ) ; +#73388 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174874700, 70.16054007504448000, -28.34042301926893600 ) ) ; +#73389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16783, #10796, #29590, #73091 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#73390 = EDGE_CURVE ( 'NONE', #2580, #38778, #41391, .T. ) ; +#73391 = EDGE_CURVE ( 'NONE', #38741, #34824, #26971, .T. ) ; +#73392 = AXIS2_PLACEMENT_3D ( 'NONE', #45813, #77130, #39860 ) ; +#73393 = ORIENTED_EDGE ( 'NONE', *, *, #34091, .T. ) ; +#73394 = CARTESIAN_POINT ( 'NONE', ( -2.487410011451146400, 70.12140959736001400, -28.55996453402207500 ) ) ; +#73395 = ORIENTED_EDGE ( 'NONE', *, *, #62662, .F. ) ; +#73396 = CARTESIAN_POINT ( 'NONE', ( -6.186983509741758700, 44.45000000000001000, 4.029746255247967000 ) ) ; +#73397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73398 = CIRCLE ( 'NONE', #41912, 9.500000000000097700 ) ; +#73399 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 29.83333333333334600, -12.20555803803000600 ) ) ; +#73400 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25850, #19573, #57110, #19848 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001440720065782073200, 0.0004366687057309747200 ), + .UNSPECIFIED. ) ; +#73401 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#73402 = EDGE_CURVE ( 'NONE', #76021, #11197, #12502, .T. ) ; +#73403 = AXIS2_PLACEMENT_3D ( 'NONE', #66208, #28986, #72473 ) ; +#73404 = AXIS2_PLACEMENT_3D ( 'NONE', #69819, #26347, #13821 ) ; +#73405 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#73406 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 69.94924284854742800, -28.20555803802997700 ) ) ; +#73407 = PLANE ( 'NONE', #26222 ) ; +#73408 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515423400, 81.01872124563918500, -28.53757464917569900 ) ) ; +#73409 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627474700, 67.93535825203913700, -28.53896444442250400 ) ) ; +#73410 = CARTESIAN_POINT ( 'NONE', ( 11.18653997827033200, 6.877501000802047000, -28.20555803803042500 ) ) ; +#73411 = CARTESIAN_POINT ( 'NONE', ( 17.84492399245714000, 8.577538003771433500, -28.31211723219302100 ) ) ; +#73412 = CIRCLE ( 'NONE', #34132, 10.00000000000009200 ) ; +#73413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73414 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 81.43945992495501700, -28.34042301926918800 ) ) ; +#73415 = CARTESIAN_POINT ( 'NONE', ( 17.92465373295035000, 97.44934868163586800, -26.81692177028490700 ) ) ; +#73417 = EDGE_LOOP ( 'NONE', ( #33042, #34650, #66125 ) ) ; +#73416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73419 = ORIENTED_EDGE ( 'NONE', *, *, #34524, .F. ) ; +#73420 = ADVANCED_FACE ( 'NONE', ( #22634 ), #37193, .F. ) ; +#73421 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#73422 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 79.97246552159111800, -28.38801640354855100 ) ) ; +#73423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73424 = FACE_OUTER_BOUND ( 'NONE', #26396, .T. ) ; +#73425 = AXIS2_PLACEMENT_3D ( 'NONE', #19427, #50386, #56681 ) ; +#73426 = EDGE_LOOP ( 'NONE', ( #16096, #54554, #49352 ) ) ; +#73427 = FACE_OUTER_BOUND ( 'NONE', #28199, .T. ) ; +#73428 = EDGE_LOOP ( 'NONE', ( #45690, #55990, #58457, #27972, #30688 ) ) ; +#73429 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 33.33333333333335000, 5.722645192245503900 ) ) ; +#73430 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534579100, 50.49920551340399300, -28.70555803802996700 ) ) ; +#73431 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 51.46283204837339300, -28.48697406221667400 ) ) ; +#73432 = EDGE_LOOP ( 'NONE', ( #75716, #60800, #72185 ) ) ; +#73433 = FACE_OUTER_BOUND ( 'NONE', #26085, .T. ) ; +#73434 = FACE_OUTER_BOUND ( 'NONE', #73527, .T. ) ; +#73435 = EDGE_LOOP ( 'NONE', ( #18604, #6609, #30584 ) ) ; +#73436 = ORIENTED_EDGE ( 'NONE', *, *, #56168, .T. ) ; +#73437 = ORIENTED_EDGE ( 'NONE', *, *, #7234, .T. ) ; +#73438 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#73439 = ADVANCED_FACE ( 'NONE', ( #70299 ), #4119, .T. ) ; +#73440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73441 = AXIS2_PLACEMENT_3D ( 'NONE', #20866, #27398, #58390 ) ; +#73442 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 81.25732391202362200, -28.20555803803030800 ) ) ; +#73443 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.41070809551055700, -28.20555803802994200 ) ) ; +#73444 = CARTESIAN_POINT ( 'NONE', ( 1.466217265774541600, 57.14999999999999900, -10.39118290423441600 ) ) ; +#73445 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10793, #35807, #54569, #17306 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925471843459736900E-007, 0.0002673661861287488100 ), + .UNSPECIFIED. ) ; +#73446 = EDGE_CURVE ( 'NONE', #25185, #27539, #78830, .T. ) ; +#73447 = CONICAL_SURFACE ( 'NONE', #55498, 10.50000000000009600, 0.7853981633974518300 ) ; +#73448 = ORIENTED_EDGE ( 'NONE', *, *, #60, .F. ) ; +#73449 = CARTESIAN_POINT ( 'NONE', ( 15.05230528786147600, 55.75869881725353100, -28.70545453106902700 ) ) ; +#73450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73451 = CIRCLE ( 'NONE', #35726, 10.00000000000009400 ) ; +#73452 = AXIS2_PLACEMENT_3D ( 'NONE', #64622, #71119, #33860 ) ; +#73453 = ORIENTED_EDGE ( 'NONE', *, *, #55404, .T. ) ; +#73454 = ADVANCED_FACE ( 'NONE', ( #24582 ), #51777, .T. ) ; +#73455 = ORIENTED_EDGE ( 'NONE', *, *, #10581, .T. ) ; +#73456 = ORIENTED_EDGE ( 'NONE', *, *, #13317, .T. ) ; +#73457 = ORIENTED_EDGE ( 'NONE', *, *, #65328, .T. ) ; +#73458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73459 = ORIENTED_EDGE ( 'NONE', *, *, #27884, .F. ) ; +#73460 = VECTOR ( 'NONE', #43064, 1000.000000000000000 ) ; +#73461 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#73462 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001100, 63.99926474563209700, -28.70555803802999500 ) ) ; +#73463 = ADVANCED_FACE ( 'NONE', ( #20678 ), #18726, .T. ) ; +#73464 = ORIENTED_EDGE ( 'NONE', *, *, #16292, .T. ) ; +#73465 = EDGE_CURVE ( 'NONE', #70054, #64371, #64383, .T. ) ; +#73466 = VERTEX_POINT ( 'NONE', #63272 ) ; +#73467 = FACE_OUTER_BOUND ( 'NONE', #35734, .T. ) ; +#73468 = EDGE_CURVE ( 'NONE', #29731, #67155, #68354, .T. ) ; +#73469 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 1.833333333333333000, 0.1341879241256075400 ) ) ; +#73470 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44710, #1239, #36562, #80102 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610474700, 0.0004765929656968642400 ), + .UNSPECIFIED. ) ; +#73471 = EDGE_CURVE ( 'NONE', #77640, #26103, #49837, .T. ) ; +#73472 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 42.00000000000000700, -1.205558038030005300 ) ) ; +#73473 = EDGE_CURVE ( 'NONE', #19219, #74838, #35445, .T. ) ; +#73474 = AXIS2_PLACEMENT_3D ( 'NONE', #12865, #44074, #25375 ) ; +#73475 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 57.94142842854297700, -28.20555803802997700 ) ) ; +#73476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73477 = FACE_OUTER_BOUND ( 'NONE', #43834, .T. ) ; +#73478 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#73479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73480 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 7.166666666666683800, 0.9380355014189834000 ) ) ; +#73481 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53281, #22285, #41048, #3767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716405300, 0.004080294652942961800 ), + .UNSPECIFIED. ) ; +#73482 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656716300, 28.85339758437810400, -28.20555803802994200 ) ) ; +#73483 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 57.14999999999999900, -18.70555803803000600 ) ) ; +#73484 = VERTEX_POINT ( 'NONE', #51210 ) ; +#73485 = CIRCLE ( 'NONE', #967, 9.500000000000097700 ) ; +#73486 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#73487 = AXIS2_PLACEMENT_3D ( 'NONE', #59834, #66082, #16304 ) ; +#73489 = ORIENTED_EDGE ( 'NONE', *, *, #68357, .T. ) ; +#73488 = EDGE_CURVE ( 'NONE', #65962, #20847, #35298, .T. ) ; +#73490 = CARTESIAN_POINT ( 'NONE', ( 4.561944296568764700, 49.61613305479819000, -28.57723854182903300 ) ) ; +#73491 = EDGE_CURVE ( 'NONE', #69424, #37818, #6081, .T. ) ; +#73492 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#73493 = EDGE_CURVE ( 'NONE', #78359, #63102, #20983, .T. ) ; +#73494 = CARTESIAN_POINT ( 'NONE', ( 16.08902460162564900, 39.01983257179050900, -28.64886839674169000 ) ) ; +#73495 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512255900, 71.99560977511676200, -28.70555803802997700 ) ) ; +#73496 = CIRCLE ( 'NONE', #40115, 10.00000000000009200 ) ; +#73497 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 81.25489551879202600, -28.37193179497697000 ) ) ; +#73498 = FACE_OUTER_BOUND ( 'NONE', #48370, .T. ) ; +#73499 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ; +#73500 = AXIS2_PLACEMENT_3D ( 'NONE', #55271, #18022, #61560 ) ; +#73501 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841390900, 9.936502946951316400, -28.30782889147480600 ) ) ; +#73502 = CIRCLE ( 'NONE', #3114, 10.50000000000009200 ) ; +#73503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73504 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73505 = AXIS2_PLACEMENT_3D ( 'NONE', #39178, #39456, #26984 ) ; +#73506 = ORIENTED_EDGE ( 'NONE', *, *, #75248, .T. ) ; +#73507 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73509 = EDGE_CURVE ( 'NONE', #67366, #50912, #59636, .T. ) ; +#73511 = EDGE_LOOP ( 'NONE', ( #38781, #56959, #40723, #47789 ) ) ; +#73510 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#73512 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328923800, 41.73798719401658300, -28.29447340919114900 ) ) ; +#73513 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73514 = AXIS2_PLACEMENT_3D ( 'NONE', #45445, #8199, #51709 ) ; +#73515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73516 = AXIS2_PLACEMENT_3D ( 'NONE', #34242, #34530, #59260 ) ; +#73517 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730251700, 51.58737389638851300, -28.29936525552453500 ) ) ; +#73518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25812, #69304, #32051, #75555 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083080053800E-007, 0.0003101809493098227700 ), + .UNSPECIFIED. ) ; +#73520 = FACE_OUTER_BOUND ( 'NONE', #3850, .T. ) ; +#73521 = PLANE ( 'NONE', #43113 ) ; +#73522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73523 = FACE_OUTER_BOUND ( 'NONE', #2393, .T. ) ; +#73524 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#73525 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825478400, 90.16054007504463600, -28.34042301926890100 ) ) ; +#73526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73527 = EDGE_LOOP ( 'NONE', ( #16398, #10120, #34868, #46242 ) ) ; +#73528 = FACE_OUTER_BOUND ( 'NONE', #61158, .T. ) ; +#73529 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811642600, 20.39435118792235700, -28.41114655922299500 ) ) ; +#73530 = CARTESIAN_POINT ( 'NONE', ( -15.99167745881035100, 75.79999999999998300, -28.49360982173995500 ) ) ; +#73531 = VERTEX_POINT ( 'NONE', #2010 ) ; +#73532 = ORIENTED_EDGE ( 'NONE', *, *, #65856, .T. ) ; +#73533 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73534 = ORIENTED_EDGE ( 'NONE', *, *, #57255, .F. ) ; +#73535 = PLANE ( 'NONE', #66721 ) ; +#73536 = EDGE_LOOP ( 'NONE', ( #64194, #42423, #42200, #44436 ) ) ; +#73537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73538 = CIRCLE ( 'NONE', #9901, 9.500000000000097700 ) ; +#73539 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#73540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73541 = ORIENTED_EDGE ( 'NONE', *, *, #22361, .T. ) ; +#73542 = ORIENTED_EDGE ( 'NONE', *, *, #69148, .T. ) ; +#73543 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73544 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#73545 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23631, #60909, #29924, #73406 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464040500, 0.001179659862024339300 ), + .UNSPECIFIED. ) ; +#73546 = EDGE_LOOP ( 'NONE', ( #39945, #78870, #24213, #39593 ) ) ; +#73547 = FACE_OUTER_BOUND ( 'NONE', #41560, .T. ) ; +#73548 = AXIS2_PLACEMENT_3D ( 'NONE', #60287, #66525, #60016 ) ; +#73549 = EDGE_LOOP ( 'NONE', ( #19381, #6375, #35901, #61508, #67478, #76732 ) ) ; +#73550 = CIRCLE ( 'NONE', #72104, 10.50000000000009800 ) ; +#73551 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567160700, 28.85339758437810400, -28.20555803802994200 ) ) ; +#73552 = ADVANCED_FACE ( 'NONE', ( #2146 ), #58054, .T. ) ; +#73553 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 48.00000000000000700, 6.794441961969995200 ) ) ; +#73554 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999995900, 89.63176086632793700, -28.70555803802997700 ) ) ; +#73555 = AXIS2_PLACEMENT_3D ( 'NONE', #32463, #20232, #13736 ) ; +#73556 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73557 = CARTESIAN_POINT ( 'NONE', ( -0.9175438110566557200, 45.55000000000000400, -28.70555803802996700 ) ) ; +#73558 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999996100, 51.96823913367205700, -28.70555803802997700 ) ) ; +#73559 = ADVANCED_FACE ( 'NONE', ( #53762 ), #64492, .T. ) ; +#73560 = EDGE_CURVE ( 'NONE', #6616, #39176, #218, .T. ) ; +#73561 = CARTESIAN_POINT ( 'NONE', ( -15.32631446541102300, 33.90457788868503300, -28.70132697598340600 ) ) ; +#73562 = AXIS2_PLACEMENT_3D ( 'NONE', #21177, #64704, #27442 ) ; +#73563 = CIRCLE ( 'NONE', #593, 10.50000000000009600 ) ; +#73564 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41899, #79191, #10908, #54413 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215360189700E-007, 0.0007606633682806934500 ), + .UNSPECIFIED. ) ; +#73565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73566 = ORIENTED_EDGE ( 'NONE', *, *, #64581, .T. ) ; +#73567 = ORIENTED_EDGE ( 'NONE', *, *, #5273, .T. ) ; +#73568 = FACE_OUTER_BOUND ( 'NONE', #76856, .T. ) ; +#73569 = VERTEX_POINT ( 'NONE', #39552 ) ; +#73570 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73571 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73573 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 19.33333333333333600, -10.73183747965883100 ) ) ; +#73574 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 71.43945992495532900, -28.34042301926881200 ) ) ; +#73575 = FACE_OUTER_BOUND ( 'NONE', #35006, .T. ) ; +#73576 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73577 = CIRCLE ( 'NONE', #62684, 10.50000000000009600 ) ; +#73578 = CARTESIAN_POINT ( 'NONE', ( -2.655202348769035900, 18.78860447109612900, -28.53900456328624100 ) ) ; +#73580 = EDGE_CURVE ( 'NONE', #45679, #56169, #76145, .T. ) ; +#73579 = ORIENTED_EDGE ( 'NONE', *, *, #52708, .T. ) ; +#73581 = EDGE_CURVE ( 'NONE', #45907, #35436, #6495, .T. ) ; +#73582 = CONICAL_SURFACE ( 'NONE', #7747, 10.50000000000009600, 0.7853981633974500600 ) ; +#73583 = ORIENTED_EDGE ( 'NONE', *, *, #13419, .F. ) ; +#73584 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#73585 = ORIENTED_EDGE ( 'NONE', *, *, #32851, .T. ) ; +#73586 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000071900, 53.65857157145661900, -28.20555803803030800 ) ) ; +#73587 = EDGE_CURVE ( 'NONE', #43835, #39407, #16774, .T. ) ; +#73588 = FACE_OUTER_BOUND ( 'NONE', #14469, .T. ) ; +#73589 = EDGE_CURVE ( 'NONE', #28672, #9849, #33314, .T. ) ; +#73590 = CONICAL_SURFACE ( 'NONE', #48086, 10.50000000000009200, 0.7853981633974482800 ) ; +#73591 = AXIS2_PLACEMENT_3D ( 'NONE', #21134, #45823, #58381 ) ; +#73592 = CARTESIAN_POINT ( 'NONE', ( -15.41232936305484800, 49.20395328581638900, -28.70555803803002000 ) ) ; +#73593 = ORIENTED_EDGE ( 'NONE', *, *, #46444, .T. ) ; +#73594 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73595 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 53.83333333333334300, 0.1341879241256075400 ) ) ; +#73596 = EDGE_CURVE ( 'NONE', #61231, #46812, #49816, .T. ) ; +#73597 = ORIENTED_EDGE ( 'NONE', *, *, #71437, .F. ) ; +#73598 = CARTESIAN_POINT ( 'NONE', ( 15.94782201824417800, 9.526088990877912700, -28.66053837059378400 ) ) ; +#73599 = ORIENTED_EDGE ( 'NONE', *, *, #75254, .T. ) ; +#73600 = ORIENTED_EDGE ( 'NONE', *, *, #79450, .F. ) ; +#73601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73602 = EDGE_LOOP ( 'NONE', ( #30522, #49717, #79384, #41291 ) ) ; +#73603 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#73604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73605 = FACE_OUTER_BOUND ( 'NONE', #31482, .T. ) ; +#73606 = CONICAL_SURFACE ( 'NONE', #48322, 10.00000000000009600, 0.7853981633974447300 ) ; +#73607 = ORIENTED_EDGE ( 'NONE', *, *, #63219, .F. ) ; +#73608 = AXIS2_PLACEMENT_3D ( 'NONE', #41611, #47844, #78910 ) ; +#73609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73610 = EDGE_CURVE ( 'NONE', #44518, #28549, #47882, .T. ) ; +#73611 = CARTESIAN_POINT ( 'NONE', ( 1.498152090609205200, 35.68533208989821000, -28.53910738522652200 ) ) ; +#73612 = EDGE_CURVE ( 'NONE', #71408, #28056, #66423, .T. ) ; +#73613 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428581100, 83.67681279774444600, -28.70555803803047500 ) ) ; +#73614 = EDGE_CURVE ( 'NONE', #46424, #75159, #14822, .T. ) ; +#73615 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73980, #17942, #80222, #42940 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794194386900E-007, 0.0009376791149930080300 ), + .UNSPECIFIED. ) ; +#73616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73617 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73618 = CIRCLE ( 'NONE', #72220, 9.500000000000095900 ) ; +#73619 = CARTESIAN_POINT ( 'NONE', ( 11.32247251554029600, 9.342828874293818600, -28.51468825946499700 ) ) ; +#73620 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73621 = AXIS2_PLACEMENT_3D ( 'NONE', #25471, #6946, #62728 ) ; +#73622 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73623 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180800000, 51.65075715145310700, -28.20555803802997700 ) ) ; +#73624 = ORIENTED_EDGE ( 'NONE', *, *, #31554, .F. ) ; +#73625 = LINE ( 'NONE', #6082, #79481 ) ; +#73626 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#73627 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#73628 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 96.59999999999999400, -18.70555803803001300 ) ) ; +#73629 = EDGE_CURVE ( 'NONE', #10085, #44613, #31382, .T. ) ; +#73630 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999996100, 65.92347538298001600, -28.70555803802997700 ) ) ; +#73631 = AXIS2_PLACEMENT_3D ( 'NONE', #60375, #23101, #66613 ) ; +#73632 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999561200, 81.96823913367204300, -28.70555803803014400 ) ) ; +#73633 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274335100, 73.66464174796072900, -28.53896444442201400 ) ) ; +#73634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73636 = CARTESIAN_POINT ( 'NONE', ( 4.035920356936732600, 31.09789380924897300, -28.25343951603329600 ) ) ; +#73637 = VERTEX_POINT ( 'NONE', #71652 ) ; +#73638 = ADVANCED_FACE ( 'NONE', ( #79074 ), #43968, .T. ) ; +#73639 = CONICAL_SURFACE ( 'NONE', #73548, 10.50000000000009600, 0.7853981633974500600 ) ; +#73641 = VERTEX_POINT ( 'NONE', #53130 ) ; +#73640 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343284300, 9.746602415621378400, -28.20555803803042500 ) ) ; +#73642 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 51.65075715145312800, -28.20555803802997700 ) ) ; +#73643 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 60.16666666666666400, 1.741883078712356500 ) ) ; +#73644 = FACE_OUTER_BOUND ( 'NONE', #57184, .T. ) ; +#73645 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650674900, 18.08087956867505500, -28.30223257055606800 ) ) ; +#73646 = ORIENTED_EDGE ( 'NONE', *, *, #9650, .F. ) ; +#73647 = ADVANCED_FACE ( 'NONE', ( #29464 ), #10926, .T. ) ; +#73648 = CYLINDRICAL_SURFACE ( 'NONE', #66067, 10.00000000000000000 ) ; +#73649 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 25.33333333333334300, -3.705558038030004400 ) ) ; +#73650 = AXIS2_PLACEMENT_3D ( 'NONE', #41891, #35664, #4636 ) ; +#73651 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#73652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#73653 = EDGE_LOOP ( 'NONE', ( #80058, #41617, #60815 ) ) ; +#73654 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73655 = AXIS2_PLACEMENT_3D ( 'NONE', #22462, #65992, #28768 ) ; +#73656 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73657 = CIRCLE ( 'NONE', #32729, 10.50000000000009800 ) ; +#73658 = CIRCLE ( 'NONE', #3208, 9.500000000000101300 ) ; +#73659 = ORIENTED_EDGE ( 'NONE', *, *, #58697, .T. ) ; +#73660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73661 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#73662 = EDGE_CURVE ( 'NONE', #34137, #48925, #72836, .T. ) ; +#73663 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 27.66666666666667100, 8.320721403598824400 ) ) ; +#73664 = AXIS2_PLACEMENT_3D ( 'NONE', #11986, #55493, #18243 ) ; +#73665 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7658, #44907, #13960, #57469 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392203916400E-007, 0.0003301092607755730400 ), + .UNSPECIFIED. ) ; +#73666 = ORIENTED_EDGE ( 'NONE', *, *, #18672, .T. ) ; +#73667 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73668 = CARTESIAN_POINT ( 'NONE', ( 9.794151403462297600, 71.39409401757608000, -28.39369363572379600 ) ) ; +#73669 = EDGE_LOOP ( 'NONE', ( #5677, #60547, #71979 ) ) ; +#73670 = CARTESIAN_POINT ( 'NONE', ( -5.060928057032790600, 10.00000000000006900, -28.70555803802998100 ) ) ; +#73671 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73672 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714282900, 63.67681279774499400, -28.70555803802997700 ) ) ; +#73673 = ADVANCED_FACE ( 'NONE', ( #62511 ), #58606, .T. ) ; +#73674 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507556700, 19.89456479767167400, -28.70555803802994200 ) ) ; +#73675 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999100, 17.98922577050314300, -28.37255355648656500 ) ) ; +#73676 = CARTESIAN_POINT ( 'NONE', ( -16.56643609059976500, 23.37492275335521800, -28.58387515229125200 ) ) ; +#73677 = VECTOR ( 'NONE', #23499, 1000.000000000000000 ) ; +#73678 = EDGE_LOOP ( 'NONE', ( #18189, #60719, #3544 ) ) ; +#73679 = AXIS2_PLACEMENT_3D ( 'NONE', #59110, #9322, #21863 ) ; +#73680 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73681 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73682 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451035100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#73683 = VERTEX_POINT ( 'NONE', #16157 ) ; +#73684 = ORIENTED_EDGE ( 'NONE', *, *, #66, .F. ) ; +#73685 = ORIENTED_EDGE ( 'NONE', *, *, #56073, .F. ) ; +#73686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73687 = ORIENTED_EDGE ( 'NONE', *, *, #27154, .F. ) ; +#73688 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73689 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 61.22294471194857800, -28.20555803803047800 ) ) ; +#73690 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#73691 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541609000, 20.01125751638927900, -28.53740755999534400 ) ) ; +#73692 = CIRCLE ( 'NONE', #64119, 9.500000000000101300 ) ; +#73693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73694 = ORIENTED_EDGE ( 'NONE', *, *, #57043, .F. ) ; +#73695 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73696 = CARTESIAN_POINT ( 'NONE', ( 15.85864231129045100, 14.04999999999976100, -28.50266868976643800 ) ) ; +#73697 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063281200, 31.09789380924897300, -28.25343951603329600 ) ) ; +#73698 = ORIENTED_EDGE ( 'NONE', *, *, #18441, .F. ) ; +#73699 = VECTOR ( 'NONE', #31468, 1000.000000000000000 ) ; +#73700 = EDGE_CURVE ( 'NONE', #49127, #42971, #60574, .T. ) ; +#73701 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 31.16666666666668200, -9.205558038030003900 ) ) ; +#73702 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 62.31032580521099400, -28.59353418718932400 ) ) ; +#73703 = ORIENTED_EDGE ( 'NONE', *, *, #47212, .F. ) ; +#73704 = EDGE_CURVE ( 'NONE', #77640, #28848, #27483, .T. ) ; +#73705 = CIRCLE ( 'NONE', #25635, 10.00000000000009400 ) ; +#73706 = CIRCLE ( 'NONE', #52183, 10.00000000000009200 ) ; +#73707 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999990600, 87.60073525436762100, -28.70555803803001600 ) ) ; +#73708 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#73709 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73710 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#73711 = CARTESIAN_POINT ( 'NONE', ( 7.313867583122992700, 57.14999999999998400, -6.107857319714094400 ) ) ; +#73712 = EDGE_CURVE ( 'NONE', #4291, #33868, #77105, .T. ) ; +#73713 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ; +#73714 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#73715 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73716 = EDGE_CURVE ( 'NONE', #69811, #21392, #75151, .T. ) ; +#73717 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451075600, 9.940690926013799000, -28.35186440610870300 ) ) ; +#73718 = EDGE_CURVE ( 'NONE', #6772, #62615, #58348, .T. ) ; +#73719 = CIRCLE ( 'NONE', #30775, 10.50000000000009800 ) ; +#73720 = VERTEX_POINT ( 'NONE', #3896 ) ; +#73721 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30019, #36234, #54985, #17748 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574919165100E-007, 0.0007596410370205471400 ), + .UNSPECIFIED. ) ; +#73722 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#73723 = ORIENTED_EDGE ( 'NONE', *, *, #5901, .T. ) ; +#73724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52138, #58429, #33675, #77197 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679647935184600E-007, 0.0007596411030280991000 ), + .UNSPECIFIED. ) ; +#73725 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823703100, 48.69543746431602900, -28.61277292027075300 ) ) ; +#73726 = EDGE_LOOP ( 'NONE', ( #27474, #37091, #66744, #33492 ) ) ; +#73727 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#73728 = FACE_OUTER_BOUND ( 'NONE', #28086, .T. ) ; +#73729 = AXIS2_PLACEMENT_3D ( 'NONE', #20681, #64225, #26949 ) ; +#73730 = EDGE_CURVE ( 'NONE', #22562, #69763, #12888, .T. ) ; +#73731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73732 = EDGE_CURVE ( 'NONE', #79995, #48057, #45922, .T. ) ; +#73733 = VERTEX_POINT ( 'NONE', #22942 ) ; +#73734 = EDGE_CURVE ( 'NONE', #66358, #55249, #43848, .T. ) ; +#73735 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#73736 = ADVANCED_FACE ( 'NONE', ( #25537 ), #7006, .F. ) ; +#73737 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47282, #10063, #22836, #66373 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009312744100397508000, 0.001517194977238200000 ), + .UNSPECIFIED. ) ; +#73738 = AXIS2_PLACEMENT_3D ( 'NONE', #53432, #22439, #9928 ) ; +#73739 = FACE_OUTER_BOUND ( 'NONE', #48268, .T. ) ; +#73740 = ORIENTED_EDGE ( 'NONE', *, *, #55129, .F. ) ; +#73741 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#73742 = ORIENTED_EDGE ( 'NONE', *, *, #6608, .T. ) ; +#73743 = ADVANCED_FACE ( 'NONE', ( #40098 ), #54692, .T. ) ; +#73744 = AXIS2_PLACEMENT_3D ( 'NONE', #37617, #366, #43854 ) ; +#73745 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, -0.3333333333333209400, -3.705558038030004400 ) ) ; +#73746 = AXIS2_PLACEMENT_3D ( 'NONE', #35667, #23415, #66938 ) ; +#73747 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49294, #5817, #61861, #24584 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709140800, 0.0006599881756734669000 ), + .UNSPECIFIED. ) ; +#73748 = AXIS2_PLACEMENT_3D ( 'NONE', #42775, #61322, #11802 ) ; +#73749 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298131100, 85.79999999999998300, -28.70555803802997700 ) ) ; +#73750 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#73751 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 39.83333333333334300, -3.349151577478984600 ) ) ; +#73752 = CIRCLE ( 'NONE', #54673, 10.00000000000009400 ) ; +#73753 = CONICAL_SURFACE ( 'NONE', #63159, 10.50000000000009600, 0.7853981633974500600 ) ; +#73754 = ORIENTED_EDGE ( 'NONE', *, *, #15225, .F. ) ; +#73755 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73756 = ORIENTED_EDGE ( 'NONE', *, *, #33439, .T. ) ; +#73757 = CARTESIAN_POINT ( 'NONE', ( -17.03177803894783100, 80.28233213024647300, -28.25051428653848600 ) ) ; +#73758 = ORIENTED_EDGE ( 'NONE', *, *, #6513, .T. ) ; +#73759 = ADVANCED_FACE ( 'NONE', ( #8927 ), #21638, .T. ) ; +#73760 = CARTESIAN_POINT ( 'NONE', ( 10.93543899802699200, 71.50961459723726000, -28.29483879644671900 ) ) ; +#73761 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949245800, 17.57379779496241700, -28.70555803802992800 ) ) ; +#73762 = EDGE_LOOP ( 'NONE', ( #19920, #67538, #47872, #13733 ) ) ; +#73763 = EDGE_LOOP ( 'NONE', ( #19341, #44880, #17860 ) ) ; +#73764 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 5.000000000000004400, -1.205558038030005300 ) ) ; +#73765 = ORIENTED_EDGE ( 'NONE', *, *, #61501, .F. ) ; +#73766 = AXIS2_PLACEMENT_3D ( 'NONE', #34759, #78269, #40999 ) ; +#73767 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019288400, 66.79999999999944300, -28.70555803803047500 ) ) ; +#73768 = ORIENTED_EDGE ( 'NONE', *, *, #72439, .F. ) ; +#73769 = EDGE_CURVE ( 'NONE', #19234, #13816, #29484, .T. ) ; +#73770 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25764, #75249, #32000, #75502 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.602085213965211000E-018, 0.001246264537621158500 ), + .UNSPECIFIED. ) ; +#73771 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73772 = ADVANCED_FACE ( 'NONE', ( #71247 ), #69286, .T. ) ; +#73773 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181919600, 61.65075715145310700, -28.20555803802997700 ) ) ; +#73774 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73775 = CARTESIAN_POINT ( 'NONE', ( -17.36059854261445400, 28.66749699759768800, -28.25434854811488300 ) ) ; +#73776 = CARTESIAN_POINT ( 'NONE', ( 2.785741443455902900, 71.52472935029896900, -28.39317435246137200 ) ) ; +#73777 = CONICAL_SURFACE ( 'NONE', #26196, 10.00000000000009600, 0.7853981633974447300 ) ; +#73778 = ORIENTED_EDGE ( 'NONE', *, *, #28739, .F. ) ; +#73779 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#73780 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#73781 = EDGE_CURVE ( 'NONE', #59892, #78759, #5052, .T. ) ; +#73782 = ORIENTED_EDGE ( 'NONE', *, *, #63244, .F. ) ; +#73783 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73784 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73785 = AXIS2_PLACEMENT_3D ( 'NONE', #64598, #58312, #52016 ) ; +#73786 = CARTESIAN_POINT ( 'NONE', ( -11.10799745734542500, 81.32559822014179900, -28.29986836858017100 ) ) ; +#73787 = CONICAL_SURFACE ( 'NONE', #50031, 10.50000000000009600, 0.7853981633974500600 ) ; +#73788 = CARTESIAN_POINT ( 'NONE', ( 10.06455573922516300, 80.09037803491457900, -28.29483400905907300 ) ) ; +#73789 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#73790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73791 = ORIENTED_EDGE ( 'NONE', *, *, #38164, .F. ) ; +#73792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73793 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73795 = CARTESIAN_POINT ( 'NONE', ( -9.093266739736703700, 45.54999999999999700, -28.70555803802996700 ) ) ; +#73796 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348813400, 81.99560977511662000, -28.70555803802997700 ) ) ; +#73797 = AXIS2_PLACEMENT_3D ( 'NONE', #648, #44134, #6912 ) ; +#73798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73799 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000460100, 18.16749699759770200, -28.20555803803009500 ) ) ; +#73800 = CIRCLE ( 'NONE', #10397, 10.00000000000009200 ) ; +#73801 = ORIENTED_EDGE ( 'NONE', *, *, #58098, .T. ) ; +#73802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73803 = ORIENTED_EDGE ( 'NONE', *, *, #58197, .T. ) ; +#73804 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 60.23237991241948900, -28.26633708900884300 ) ) ; +#73805 = CIRCLE ( 'NONE', #46118, 10.00000000000009200 ) ; +#73806 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999992600, -28.20555803803005900 ) ) ; +#73807 = CARTESIAN_POINT ( 'NONE', ( 10.75702442553472300, 90.16517473503375900, -28.29551658696730200 ) ) ; +#73808 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73809 = AXIS2_PLACEMENT_3D ( 'NONE', #40933, #9932, #78205 ) ; +#73810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73811 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000002300, 60.90050506338789700, -28.70555803803030800 ) ) ; +#73812 = EDGE_CURVE ( 'NONE', #60512, #69301, #14973, .T. ) ; +#73813 = FACE_OUTER_BOUND ( 'NONE', #67380, .T. ) ; +#73814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73815 = ORIENTED_EDGE ( 'NONE', *, *, #60398, .F. ) ; +#73816 = ORIENTED_EDGE ( 'NONE', *, *, #63823, .F. ) ; +#73817 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 45.83333333333334300, -9.205558038030003900 ) ) ; +#73818 = ORIENTED_EDGE ( 'NONE', *, *, #65067, .F. ) ; +#73819 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378051200, 50.77483928597539600, -28.57108397021911700 ) ) ; +#73820 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310472500, 30.99769010897086800, -28.61774594594331600 ) ) ; +#73821 = CARTESIAN_POINT ( 'NONE', ( 9.680229948100942400, 31.47636006919873400, -28.38670679782147100 ) ) ; +#73822 = ADVANCED_FACE ( 'NONE', ( #42040 ), #19672, .T. ) ; +#73823 = LINE ( 'NONE', #35535, #13505 ) ; +#73825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26312, #32532, #51247, #14047 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001109330974185004500, 0.001517199873936113700 ), + .UNSPECIFIED. ) ; +#73824 = CARTESIAN_POINT ( 'NONE', ( 2.813460021729300200, 6.877501000800539700, -28.20555803802993100 ) ) ; +#73826 = FACE_OUTER_BOUND ( 'NONE', #21021, .T. ) ; +#73827 = ORIENTED_EDGE ( 'NONE', *, *, #57382, .F. ) ; +#73829 = EDGE_CURVE ( 'NONE', #56323, #63375, #493, .T. ) ; +#73828 = ORIENTED_EDGE ( 'NONE', *, *, #43525, .F. ) ; +#73830 = ORIENTED_EDGE ( 'NONE', *, *, #10331, .T. ) ; +#73831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73832 = FACE_OUTER_BOUND ( 'NONE', #27937, .T. ) ; +#73833 = ORIENTED_EDGE ( 'NONE', *, *, #10931, .F. ) ; +#73834 = ORIENTED_EDGE ( 'NONE', *, *, #33946, .F. ) ; +#73835 = ORIENTED_EDGE ( 'NONE', *, *, #37571, .F. ) ; +#73836 = EDGE_LOOP ( 'NONE', ( #61550, #48231, #48174 ) ) ; +#73837 = ORIENTED_EDGE ( 'NONE', *, *, #1143, .F. ) ; +#73838 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428580100, 63.67681279774445400, -28.70555803803047500 ) ) ; +#73839 = ADVANCED_FACE ( 'NONE', ( #52729 ), #67351, .F. ) ; +#73840 = AXIS2_PLACEMENT_3D ( 'NONE', #49416, #12209, #74239 ) ; +#73841 = VERTEX_POINT ( 'NONE', #5517 ) ; +#73842 = EDGE_CURVE ( 'NONE', #7884, #62844, #23570, .T. ) ; +#73843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56813, #38539, #57344, #20099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679648632007900E-007, 0.0007596411030280927000 ), + .UNSPECIFIED. ) ; +#73844 = EDGE_CURVE ( 'NONE', #9750, #10125, #56634, .T. ) ; +#73845 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#73846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73847 = CARTESIAN_POINT ( 'NONE', ( 3.277422164555713600, 69.72166103827328200, -28.53892303408232700 ) ) ; +#73848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73849 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 17.16666666666667500, 9.794441961969994300 ) ) ; +#73850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73851 = EDGE_CURVE ( 'NONE', #58067, #61208, #36205, .T. ) ; +#73852 = CONICAL_SURFACE ( 'NONE', #14142, 10.00000000000009400, 0.7853981633974447300 ) ; +#73853 = AXIS2_PLACEMENT_3D ( 'NONE', #17208, #60736, #23460 ) ; +#73854 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 22.65857157145701000, -28.20555803802995200 ) ) ; +#73855 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#73856 = EDGE_LOOP ( 'NONE', ( #48471, #29994, #67107 ) ) ; +#73857 = ADVANCED_FACE ( 'NONE', ( #3099 ), #17716, .T. ) ; +#73858 = ORIENTED_EDGE ( 'NONE', *, *, #52087, .T. ) ; +#73859 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.43250300240229200, -28.20555803802997700 ) ) ; +#73860 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68743, #31500, #6724, #50208 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.091337135425211100E-018, 0.001246264537621152000 ), + .UNSPECIFIED. ) ; +#73861 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174623300, 80.16054007504462200, -28.34042301926884400 ) ) ; +#73862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73863 = CARTESIAN_POINT ( 'NONE', ( -3.023159676506413300, 41.51912043132477200, -28.30223257055575200 ) ) ; +#73864 = FACE_OUTER_BOUND ( 'NONE', #73023, .T. ) ; +#73865 = AXIS2_PLACEMENT_3D ( 'NONE', #7067, #19610, #63133 ) ; +#73866 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 26.66545993132818300, -28.70555803802997700 ) ) ; +#73868 = ORIENTED_EDGE ( 'NONE', *, *, #8132, .F. ) ; +#73867 = AXIS2_PLACEMENT_3D ( 'NONE', #3629, #40915, #22424 ) ; +#73869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52635, #71154, #65210, #27950 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635064131900E-007, 0.0004064396303281826400 ), + .UNSPECIFIED. ) ; +#73870 = EDGE_LOOP ( 'NONE', ( #29289, #27244, #31286, #42463, #45051 ) ) ; +#73871 = EDGE_CURVE ( 'NONE', #13531, #73096, #50765, .T. ) ; +#73872 = ADVANCED_FACE ( 'NONE', ( #38126 ), #15760, .F. ) ; +#73873 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#73875 = AXIS2_PLACEMENT_3D ( 'NONE', #41606, #47842, #66384 ) ; +#73874 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 48.66666666666668600, 2.794441961969994700 ) ) ; +#73876 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925631200, 31.78032162676581200, -28.55467576046956100 ) ) ; +#73877 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679527700, 81.08083798124329200, -28.45106778992437700 ) ) ; +#73878 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 51.66666666666667100, -3.705558038030004400 ) ) ; +#73879 = FACE_OUTER_BOUND ( 'NONE', #21564, .T. ) ; +#73880 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#73881 = ORIENTED_EDGE ( 'NONE', *, *, #40814, .F. ) ; +#73882 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73883 = CARTESIAN_POINT ( 'NONE', ( -6.418476861114186200E-014, 22.65857157145693900, -28.20555803802995200 ) ) ; +#73884 = ORIENTED_EDGE ( 'NONE', *, *, #11544, .F. ) ; +#73885 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 23.37738371066728100, -28.70555803802995200 ) ) ; +#73886 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 69.77559325427184000, -28.45987523529581900 ) ) ; +#73887 = EDGE_CURVE ( 'NONE', #77240, #48902, #48821, .T. ) ; +#73888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73889 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846307800, 60.79999999999999700, -28.55171188418377100 ) ) ; +#73890 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841389500, 28.66349705304866500, -28.30782889147480900 ) ) ; +#73891 = AXIS2_PLACEMENT_3D ( 'NONE', #26370, #45046, #32586 ) ; +#73892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73893 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#73894 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73895 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999970700, 83.65857157145681800, -28.20555803803047800 ) ) ; +#73896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73897 = CARTESIAN_POINT ( 'NONE', ( 15.44287341260015900, 39.20034312068832300, -28.70555803803001600 ) ) ; +#73898 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571488300, 61.52858243452089900, -28.70555803803014400 ) ) ; +#73899 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 81.25732391202362200, -28.20555803803030800 ) ) ; +#73900 = CIRCLE ( 'NONE', #70258, 10.00000000000009200 ) ; +#73901 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#73902 = CIRCLE ( 'NONE', #80185, 10.50000000000009800 ) ; +#73903 = CARTESIAN_POINT ( 'NONE', ( -3.792055760495013600, 41.90771342879322200, -28.53891855579990300 ) ) ; +#73904 = EDGE_LOOP ( 'NONE', ( #56403, #62506, #48306, #29454 ) ) ; +#73905 = AXIS2_PLACEMENT_3D ( 'NONE', #43648, #12429, #12704 ) ; +#73906 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73907 = ORIENTED_EDGE ( 'NONE', *, *, #34135, .F. ) ; +#73908 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73909 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534586700, 29.49920551340399300, -28.70555803802994200 ) ) ; +#73910 = EDGE_LOOP ( 'NONE', ( #61344, #26231, #15666, #72791 ) ) ; +#73911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#73913 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61543, #17998, #74043, #36744 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711373872100E-007, 0.0008482615949373553500 ), + .UNSPECIFIED. ) ; +#73914 = CONICAL_SURFACE ( 'NONE', #67042, 10.00000000000009400, 0.7853981633974447300 ) ; +#73915 = EDGE_LOOP ( 'NONE', ( #7670, #44799, #70817, #58683 ) ) ; +#73916 = CONICAL_SURFACE ( 'NONE', #55740, 10.50000000000009600, 0.7853981633974500600 ) ; +#73917 = AXIS2_PLACEMENT_3D ( 'NONE', #57387, #7583, #13884 ) ; +#73918 = EDGE_LOOP ( 'NONE', ( #16672, #28127, #71459 ) ) ; +#73919 = ORIENTED_EDGE ( 'NONE', *, *, #29202, .F. ) ; +#73920 = EDGE_LOOP ( 'NONE', ( #32295, #7733, #75516, #57356 ) ) ; +#73921 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 58.00000000000002100, -1.205558038030002800 ) ) ; +#73922 = CONICAL_SURFACE ( 'NONE', #73621, 10.00000000000009400, 0.7853981633974447300 ) ; +#73923 = ORIENTED_EDGE ( 'NONE', *, *, #39728, .F. ) ; +#73924 = VERTEX_POINT ( 'NONE', #62095 ) ; +#73925 = EDGE_LOOP ( 'NONE', ( #12841, #17401, #8989 ) ) ; +#73926 = VERTEX_POINT ( 'NONE', #40 ) ; +#73928 = ORIENTED_EDGE ( 'NONE', *, *, #44608, .T. ) ; +#73927 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#73929 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 23.16666666666667100, 0.1341879241256129200 ) ) ; +#73930 = AXIS2_PLACEMENT_3D ( 'NONE', #25620, #32118, #75622 ) ; +#73931 = VERTEX_POINT ( 'NONE', #68325 ) ; +#73932 = CARTESIAN_POINT ( 'NONE', ( 6.082456188943322900, 35.04999999999997600, -28.70555803802995200 ) ) ; +#73933 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73934 = ORIENTED_EDGE ( 'NONE', *, *, #32164, .F. ) ; +#73935 = CONICAL_SURFACE ( 'NONE', #66232, 10.00000000000009200, 0.7853981633974447300 ) ; +#73936 = VERTEX_POINT ( 'NONE', #24823 ) ; +#73937 = ORIENTED_EDGE ( 'NONE', *, *, #25220, .T. ) ; +#73938 = ORIENTED_EDGE ( 'NONE', *, *, #59710, .T. ) ; +#73939 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 25.50000000000000700, -9.258116921287651700 ) ) ; +#73940 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#73941 = ORIENTED_EDGE ( 'NONE', *, *, #13119, .T. ) ; +#73942 = ORIENTED_EDGE ( 'NONE', *, *, #1695, .F. ) ; +#73943 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73944 = CIRCLE ( 'NONE', #9313, 10.50000000000009200 ) ; +#73945 = ORIENTED_EDGE ( 'NONE', *, *, #6252, .T. ) ; +#73946 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230946300, 18.78860447109613200, -28.53900456328624100 ) ) ; +#73947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#73949 = EDGE_LOOP ( 'NONE', ( #64843, #77879, #5647 ) ) ; +#73948 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274695200, 13.73212903577624300, -28.37244029424740400 ) ) ; +#73950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#73951 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 69.94924284854654700, -28.20555803803014400 ) ) ; +#73952 = FACE_OUTER_BOUND ( 'NONE', #47961, .T. ) ; +#73953 = VERTEX_POINT ( 'NONE', #49789 ) ; +#73954 = ADVANCED_FACE ( 'NONE', ( #65443 ), #46869, .F. ) ; +#73956 = EDGE_CURVE ( 'NONE', #31957, #51916, #63467, .T. ) ; +#73955 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14080, #20326, #39059, #1797 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760854542300, 0.0007596411030283568100 ), + .UNSPECIFIED. ) ; +#73957 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#73958 = VERTEX_POINT ( 'NONE', #68607 ) ; +#73959 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73961 = ORIENTED_EDGE ( 'NONE', *, *, #48072, .T. ) ; +#73960 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.30277574221156600, -28.32715733700494500 ) ) ; +#73962 = ADVANCED_FACE ( 'NONE', ( #32307 ), #78045, .T. ) ; +#73963 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#73964 = EDGE_CURVE ( 'NONE', #9849, #3798, #66845, .T. ) ; +#73965 = ADVANCED_FACE ( 'NONE', ( #34257 ), #44896, .F. ) ; +#73966 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474190100, 31.36172549728280500, -28.47230003642277300 ) ) ; +#73967 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73968 = EDGE_CURVE ( 'NONE', #28119, #65153, #61520, .T. ) ; +#73969 = AXIS2_PLACEMENT_3D ( 'NONE', #60589, #23305, #66837 ) ; +#73970 = FACE_OUTER_BOUND ( 'NONE', #44034, .T. ) ; +#73971 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 29.00000000000001100, 6.794441961969995200 ) ) ; +#73972 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73973 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280410700, 47.44142842854296300, -28.37229765499284200 ) ) ; +#73974 = CIRCLE ( 'NONE', #55625, 10.00000000000009200 ) ; +#73975 = ORIENTED_EDGE ( 'NONE', *, *, #70591, .F. ) ; +#73976 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 90.37705528805135200, -28.20555803802997700 ) ) ; +#73978 = ORIENTED_EDGE ( 'NONE', *, *, #4004, .T. ) ; +#73977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#73979 = AXIS2_PLACEMENT_3D ( 'NONE', #57756, #20503, #64041 ) ; +#73980 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534569400, 29.49920551340399300, -28.70555803802994200 ) ) ; +#73981 = CARTESIAN_POINT ( 'NONE', ( 7.831385931770886300, 57.15000000000001300, -3.099683410549962200 ) ) ; +#73982 = EDGE_CURVE ( 'NONE', #48493, #77471, #30386, .T. ) ; +#73983 = EDGE_CURVE ( 'NONE', #67647, #50469, #13826, .T. ) ; +#73984 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11494, #48703, #73775, #36474 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936617900, 0.0005776948474817002800 ), + .UNSPECIFIED. ) ; +#73985 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000010300, 80.79999999999999700, -28.20555803802997700 ) ) ; +#73986 = EDGE_CURVE ( 'NONE', #64857, #9750, #52324, .T. ) ; +#73987 = AXIS2_PLACEMENT_3D ( 'NONE', #70065, #32810, #76329 ) ; +#73988 = CIRCLE ( 'NONE', #63367, 10.00000000000009200 ) ; +#73989 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73990 = ORIENTED_EDGE ( 'NONE', *, *, #79910, .T. ) ; +#73991 = ORIENTED_EDGE ( 'NONE', *, *, #24320, .T. ) ; +#73992 = PLANE ( 'NONE', #66771 ) ; +#73993 = AXIS2_PLACEMENT_3D ( 'NONE', #21964, #34481, #77992 ) ; +#73994 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919934400, 49.87705528805138800, -28.20555803802996700 ) ) ; +#73995 = ORIENTED_EDGE ( 'NONE', *, *, #59274, .F. ) ; +#73996 = FACE_OUTER_BOUND ( 'NONE', #56430, .T. ) ; +#73997 = ORIENTED_EDGE ( 'NONE', *, *, #53547, .F. ) ; +#73998 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 49.48922577050341000, -28.37255355648633400 ) ) ; +#73999 = AXIS2_PLACEMENT_3D ( 'NONE', #73627, #79614, #36346 ) ; +#74000 = ORIENTED_EDGE ( 'NONE', *, *, #58330, .T. ) ; +#74001 = ORIENTED_EDGE ( 'NONE', *, *, #3845, .T. ) ; +#74002 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 83.42856308690586800, -28.36981695106784000 ) ) ; +#74003 = EDGE_LOOP ( 'NONE', ( #4019, #1986, #22617, #712 ) ) ; +#74004 = ORIENTED_EDGE ( 'NONE', *, *, #27101, .F. ) ; +#74006 = ORIENTED_EDGE ( 'NONE', *, *, #63154, .F. ) ; +#74005 = EDGE_CURVE ( 'NONE', #1793, #28856, #37875, .T. ) ; +#74007 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819300, 39.13131911501876200, -28.51286550264508800 ) ) ; +#74008 = AXIS2_PLACEMENT_3D ( 'NONE', #47775, #54049, #66314 ) ; +#74009 = AXIS2_PLACEMENT_3D ( 'NONE', #57741, #20492, #64028 ) ; +#74010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74011 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 71.25732391202370800, -28.20555803803030800 ) ) ; +#74012 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4327, #66367, #10599, #54097 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009399990656170648000, 0.001370301364302764800 ), + .UNSPECIFIED. ) ; +#74013 = CONICAL_SURFACE ( 'NONE', #6743, 10.00000000000009200, 0.7853981633974447300 ) ; +#74014 = EDGE_LOOP ( 'NONE', ( #10371, #14053, #76558, #41827 ) ) ; +#74015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74016 = EDGE_LOOP ( 'NONE', ( #56974, #42357, #23330 ) ) ; +#74017 = VERTEX_POINT ( 'NONE', #25643 ) ; +#74018 = EDGE_LOOP ( 'NONE', ( #64628, #61968, #49048, #6478, #76878 ) ) ; +#74019 = EDGE_LOOP ( 'NONE', ( #73919, #45975, #10606, #3456 ) ) ; +#74020 = EDGE_LOOP ( 'NONE', ( #71294, #35073, #76437, #64353 ) ) ; +#74021 = AXIS2_PLACEMENT_3D ( 'NONE', #19054, #43776, #62580 ) ; +#74022 = CARTESIAN_POINT ( 'NONE', ( -17.24166002679528400, 60.51916201875669500, -28.45106778992438000 ) ) ; +#74023 = CONICAL_SURFACE ( 'NONE', #43586, 10.00000000000009400, 0.7853981633974447300 ) ; +#74024 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, -2.499999999999989800, 2.454695999814380200 ) ) ; +#74025 = ORIENTED_EDGE ( 'NONE', *, *, #8877, .F. ) ; +#74026 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#74027 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966700, 9.940690926013795400, -28.35186440610855000 ) ) ; +#74028 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 37.66666666666667100, 2.794441961969992100 ) ) ; +#74029 = AXIS2_PLACEMENT_3D ( 'NONE', #69636, #32392, #75902 ) ; +#74030 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74032 = CONICAL_SURFACE ( 'NONE', #15999, 10.50000000000009600, 0.7853981633974500600 ) ; +#74033 = ORIENTED_EDGE ( 'NONE', *, *, #55340, .T. ) ; +#74034 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74035 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 2.833333333333345000, -3.349151577478984600 ) ) ; +#74036 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17754, #55254, #18013, #61553 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940577123200 ), + .UNSPECIFIED. ) ; +#74037 = ORIENTED_EDGE ( 'NONE', *, *, #80247, .T. ) ; +#74038 = CARTESIAN_POINT ( 'NONE', ( 4.957239735864389400, 55.80000000000016800, -28.53819074160707500 ) ) ; +#74039 = AXIS2_PLACEMENT_3D ( 'NONE', #61467, #11687, #73695 ) ; +#74040 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74041 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.16749699759737200, -28.20555803803025800 ) ) ; +#74042 = ADVANCED_FACE ( 'NONE', ( #1140 ), #42976, .F. ) ; +#74043 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 16.39962244433175800, -28.53664883431606500 ) ) ; +#74044 = EDGE_CURVE ( 'NONE', #11917, #71510, #59556, .T. ) ; +#74045 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#74046 = AXIS2_PLACEMENT_3D ( 'NONE', #80291, #43011, #5767 ) ; +#74047 = FACE_OUTER_BOUND ( 'NONE', #77393, .T. ) ; +#74048 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999633200, 54.37738371066736700, -28.70555803803030800 ) ) ; +#74049 = EDGE_LOOP ( 'NONE', ( #68186, #9962, #35780, #54934 ) ) ; +#74050 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#74051 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650641000, 49.58087956867520800, -28.30223257055574800 ) ) ; +#74052 = VERTEX_POINT ( 'NONE', #57162 ) ; +#74053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74054 = CARTESIAN_POINT ( 'NONE', ( 5.527664399851510700, 23.59761904761906200, -28.70555803802994200 ) ) ; +#74055 = ORIENTED_EDGE ( 'NONE', *, *, #59924, .F. ) ; +#74056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74057 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74058 = ADVANCED_FACE ( 'NONE', ( #28453 ), #74164, .T. ) ; +#74059 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74060 = CARTESIAN_POINT ( 'NONE', ( 16.89200254265420800, 51.32559822014141600, -28.29986836858057200 ) ) ; +#74061 = CARTESIAN_POINT ( 'NONE', ( -10.63940720644214200, 39.16749699759768800, -28.25435056028471000 ) ) ; +#74062 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74063 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701896400, 65.79999999999988300, -28.70555803803014400 ) ) ; +#74064 = CARTESIAN_POINT ( 'NONE', ( -17.40093558791467000, 79.90728766135835300, -28.41359472476244000 ) ) ; +#74065 = FACE_OUTER_BOUND ( 'NONE', #38055, .T. ) ; +#74066 = VERTEX_POINT ( 'NONE', #1376 ) ; +#74067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74068 = ORIENTED_EDGE ( 'NONE', *, *, #64196, .T. ) ; +#74069 = EDGE_CURVE ( 'NONE', #40334, #38738, #23447, .T. ) ; +#74070 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74071 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747327900, 18.13131911501848800, -28.51286550264574200 ) ) ; +#74072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74073 = FACE_OUTER_BOUND ( 'NONE', #27236, .T. ) ; +#74074 = EDGE_CURVE ( 'NONE', #5664, #5327, #76075, .T. ) ; +#74075 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 51.22294471194862100, -28.20555803802997700 ) ) ; +#74076 = ORIENTED_EDGE ( 'NONE', *, *, #31416, .F. ) ; +#74078 = ORIENTED_EDGE ( 'NONE', *, *, #70841, .F. ) ; +#74077 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844492800, 75.46616414991818500, -28.37247596307096100 ) ) ; +#74079 = ORIENTED_EDGE ( 'NONE', *, *, #77738, .F. ) ; +#74080 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#74081 = ORIENTED_EDGE ( 'NONE', *, *, #50537, .T. ) ; +#74082 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.16749699759768800, -28.20555803802997700 ) ) ; +#74083 = CARTESIAN_POINT ( 'NONE', ( 3.382710778154773800E-014, 52.97376207875062400, -28.70555803802997700 ) ) ; +#74084 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 20.35277818615433200, -28.70555803802998400 ) ) ; +#74085 = EDGE_CURVE ( 'NONE', #47321, #32745, #26483, .T. ) ; +#74086 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528136700, 41.46868088498121800, -28.51286550264512700 ) ) ; +#74088 = ADVANCED_FACE ( 'NONE', ( #73213 ), #7933, .F. ) ; +#74087 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70469, #58231, #76999, #39732 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.906538933386796600E-018, 0.001179148174663111100 ), + .UNSPECIFIED. ) ; +#74089 = EDGE_CURVE ( 'NONE', #18570, #37061, #8953, .T. ) ; +#74091 = VERTEX_POINT ( 'NONE', #32931 ) ; +#74090 = AXIS2_PLACEMENT_3D ( 'NONE', #5182, #61247, #23973 ) ; +#74092 = CIRCLE ( 'NONE', #65626, 10.00000000000009600 ) ; +#74093 = ORIENTED_EDGE ( 'NONE', *, *, #77280, .F. ) ; +#74094 = ORIENTED_EDGE ( 'NONE', *, *, #62873, .F. ) ; +#74095 = ORIENTED_EDGE ( 'NONE', *, *, #26662, .T. ) ; +#74096 = CARTESIAN_POINT ( 'NONE', ( -10.77874659791490900, 49.66476742015635900, -28.30311934730018600 ) ) ; +#74097 = ORIENTED_EDGE ( 'NONE', *, *, #5796, .T. ) ; +#74098 = ORIENTED_EDGE ( 'NONE', *, *, #3746, .T. ) ; +#74099 = EDGE_LOOP ( 'NONE', ( #55050, #59486, #76620 ) ) ; +#74100 = ORIENTED_EDGE ( 'NONE', *, *, #37836, .T. ) ; +#74101 = FACE_OUTER_BOUND ( 'NONE', #70566, .T. ) ; +#74102 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 43.66666666666667900, 5.722645192245505700 ) ) ; +#74103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74104 = AXIS2_PLACEMENT_3D ( 'NONE', #13115, #56878, #44310 ) ; +#74105 = EDGE_CURVE ( 'NONE', #57143, #38012, #79998, .T. ) ; +#74106 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507568100, 38.57379779496243800, -28.70555803802995200 ) ) ; +#74107 = CARTESIAN_POINT ( 'NONE', ( 11.72090442826420500, 51.50050415885211700, -28.63287458792276000 ) ) ; +#74108 = EDGE_CURVE ( 'NONE', #57039, #21102, #75308, .T. ) ; +#74109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74110 = EDGE_CURVE ( 'NONE', #52338, #5994, #41045, .T. ) ; +#74111 = CARTESIAN_POINT ( 'NONE', ( -17.41542217839998900, 70.41624506589144500, -28.40985430318291100 ) ) ; +#74112 = AXIS2_PLACEMENT_3D ( 'NONE', #40027, #2731, #46245 ) ; +#74113 = FACE_OUTER_BOUND ( 'NONE', #48969, .T. ) ; +#74115 = ORIENTED_EDGE ( 'NONE', *, *, #59508, .T. ) ; +#74114 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274707600, 35.05000000000000400, -28.20555803802995200 ) ) ; +#74116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74117 = EDGE_CURVE ( 'NONE', #10012, #30200, #11870, .T. ) ; +#74118 = AXIS2_PLACEMENT_3D ( 'NONE', #59440, #28470, #3650 ) ; +#74119 = AXIS2_PLACEMENT_3D ( 'NONE', #34499, #78002, #40730 ) ; +#74120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74121 = CARTESIAN_POINT ( 'NONE', ( 3.639407206442149000, 49.66749699759768100, -28.25435056028472400 ) ) ; +#74122 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74123 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 15.00000000000001400, -12.20555803803000200 ) ) ; +#74124 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655694400, 38.92298334620754500, -28.20555803802996000 ) ) ; +#74125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74126 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 46.72261628933269900, -28.70555803802996700 ) ) ; +#74127 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655690400, 49.42298334620756600, -28.20555803802997400 ) ) ; +#74128 = ORIENTED_EDGE ( 'NONE', *, *, #20831, .T. ) ; +#74129 = EDGE_LOOP ( 'NONE', ( #36810, #6093, #31547, #72955 ) ) ; +#74130 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60137, #4619, #41868, #54384 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829867008857500E-007, 0.001076778502991157600 ), + .UNSPECIFIED. ) ; +#74131 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#74132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74133 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451034400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#74135 = EDGE_LOOP ( 'NONE', ( #40292, #16282, #59963 ) ) ; +#74134 = CARTESIAN_POINT ( 'NONE', ( 3.935444260775296900, 80.09037803491489200, -28.29483400905891300 ) ) ; +#74136 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74137 = ADVANCED_FACE ( 'NONE', ( #57585 ), #70217, .F. ) ; +#74138 = CARTESIAN_POINT ( 'NONE', ( -10.37150777124396100, 81.43250300240228500, -28.25053031809458700 ) ) ; +#74139 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 46.50000000000001400, -7.061964498581026800 ) ) ; +#74140 = CYLINDRICAL_SURFACE ( 'NONE', #68473, 10.00000000000000000 ) ; +#74141 = AXIS2_PLACEMENT_3D ( 'NONE', #1288, #44766, #7531 ) ; +#74142 = ORIENTED_EDGE ( 'NONE', *, *, #50797, .F. ) ; +#74143 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#74144 = CARTESIAN_POINT ( 'NONE', ( 11.56194429656800400, 49.61613305479826900, -28.57723854182876300 ) ) ; +#74145 = ORIENTED_EDGE ( 'NONE', *, *, #79746, .F. ) ; +#74146 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 49.50000000000000700, 2.454695999814380200 ) ) ; +#74147 = EDGE_CURVE ( 'NONE', #72825, #15610, #60866, .T. ) ; +#74148 = FACE_OUTER_BOUND ( 'NONE', #4954, .T. ) ; +#74149 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#74150 = ORIENTED_EDGE ( 'NONE', *, *, #9596, .F. ) ; +#74151 = AXIS2_PLACEMENT_3D ( 'NONE', #21916, #34432, #21660 ) ; +#74152 = VERTEX_POINT ( 'NONE', #70727 ) ; +#74153 = ORIENTED_EDGE ( 'NONE', *, *, #69326, .F. ) ; +#74154 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 22.89610994602603000, -28.37519436813180800 ) ) ; +#74155 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#74156 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#74157 = ADVANCED_FACE ( 'NONE', ( #6005 ), #37119, .T. ) ; +#74158 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825237200, 70.16054007504466500, -28.34042301926881200 ) ) ; +#74159 = ORIENTED_EDGE ( 'NONE', *, *, #30644, .F. ) ; +#74160 = ORIENTED_EDGE ( 'NONE', *, *, #13525, .F. ) ; +#74161 = AXIS2_PLACEMENT_3D ( 'NONE', #54185, #35704, #79231 ) ; +#74162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74163 = CARTESIAN_POINT ( 'NONE', ( -10.24306493325782700, 51.43482203710631500, -28.29548531138973600 ) ) ; +#74164 = CONICAL_SURFACE ( 'NONE', #24433, 10.00000000000009200, 0.7853981633974447300 ) ; +#74165 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74166 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510358000, 49.65930907398620800, -28.35186440610858900 ) ) ; +#74167 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 39.69949493661175700, -28.70555803802995200 ) ) ; +#74168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74170 = FACE_OUTER_BOUND ( 'NONE', #23491, .T. ) ; +#74171 = AXIS2_PLACEMENT_3D ( 'NONE', #48343, #11124, #54623 ) ; +#74172 = ORIENTED_EDGE ( 'NONE', *, *, #76566, .T. ) ; +#74173 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#74174 = ADVANCED_FACE ( 'NONE', ( #22557 ), #4051, .F. ) ; +#74175 = VERTEX_POINT ( 'NONE', #33747 ) ; +#74176 = ADVANCED_FACE ( 'NONE', ( #24502 ), #51693, .T. ) ; +#74177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74178 = ORIENTED_EDGE ( 'NONE', *, *, #64597, .F. ) ; +#74179 = ORIENTED_EDGE ( 'NONE', *, *, #31801, .F. ) ; +#74180 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784448700, 55.79999999999999000, -28.20555803802997700 ) ) ; +#74181 = FACE_OUTER_BOUND ( 'NONE', #50607, .T. ) ; +#74182 = ORIENTED_EDGE ( 'NONE', *, *, #72889, .F. ) ; +#74183 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 60.34267608797601700, -28.20555803802997700 ) ) ; +#74184 = CIRCLE ( 'NONE', #77937, 9.500000000000097700 ) ; +#74185 = CARTESIAN_POINT ( 'NONE', ( 16.71682349290103200, 28.56267502090533100, -28.41043597897453300 ) ) ; +#74186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74187 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008000, 28.48922577050340600, -28.37255355648631300 ) ) ; +#74188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74191 = ADVANCED_FACE ( 'NONE', ( #53685 ), #18649, .T. ) ; +#74190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12803, #56278, #19024, #62560 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728436222892800E-007, 0.0007763347809200472100 ), + .UNSPECIFIED. ) ; +#74192 = EDGE_CURVE ( 'NONE', #47514, #2862, #35226, .T. ) ; +#74193 = CONICAL_SURFACE ( 'NONE', #51811, 10.00000000000009200, 0.7853981633974415100 ) ; +#74194 = VERTEX_POINT ( 'NONE', #27785 ) ; +#74195 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 55.83333333333334300, -4.152999154772353500 ) ) ; +#74196 = ORIENTED_EDGE ( 'NONE', *, *, #62931, .F. ) ; +#74197 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79703, #5173, #61233, #23958 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610017700, 0.0004765929656973354300 ), + .UNSPECIFIED. ) ; +#74198 = EDGE_CURVE ( 'NONE', #63706, #19988, #39062, .T. ) ; +#74199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74200 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31975, #13770, #32500, #76017 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720762617800E-007, 0.0002592600401774774800 ), + .UNSPECIFIED. ) ; +#74201 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 21.00000000000001800, -1.205558038030002800 ) ) ; +#74202 = EDGE_CURVE ( 'NONE', #76239, #62283, #46332, .T. ) ; +#74203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44307, #7076, #13382, #56870 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.851760880005354300E-017, 0.001246264537621171100 ), + .UNSPECIFIED. ) ; +#74205 = CARTESIAN_POINT ( 'NONE', ( -16.96407964306343200, 18.00210619075126300, -28.25343951603342400 ) ) ; +#74206 = EDGE_CURVE ( 'NONE', #49395, #47573, #72221, .T. ) ; +#74207 = EDGE_CURVE ( 'NONE', #6449, #31387, #20610, .T. ) ; +#74208 = PLANE ( 'NONE', #32831 ) ; +#74209 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 23.33333333333335000, 4.294441961970000500 ) ) ; +#74210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74211 = ORIENTED_EDGE ( 'NONE', *, *, #33946, .T. ) ; +#74212 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74213 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.589561077180745100, -28.52734861045625100 ) ) ; +#74214 = ORIENTED_EDGE ( 'NONE', *, *, #1108, .T. ) ; +#74215 = AXIS2_PLACEMENT_3D ( 'NONE', #43278, #6044, #49515 ) ; +#74216 = EDGE_CURVE ( 'NONE', #5551, #62327, #68276, .T. ) ; +#74217 = EDGE_CURVE ( 'NONE', #54001, #27795, #55627, .T. ) ; +#74218 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000027000, 89.41684396980656400, -28.70555803803024400 ) ) ; +#74219 = EDGE_CURVE ( 'NONE', #43041, #49881, #66346, .T. ) ; +#74220 = ORIENTED_EDGE ( 'NONE', *, *, #47435, .F. ) ; +#74221 = CARTESIAN_POINT ( 'NONE', ( 11.51258998854883800, 80.12140959735987200, -28.55996453402223500 ) ) ; +#74222 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74223 = CONICAL_SURFACE ( 'NONE', #70487, 10.50000000000009600, 0.7853981633974518300 ) ; +#74224 = EDGE_LOOP ( 'NONE', ( #34255, #37608, #35290, #27291 ) ) ; +#74225 = CONICAL_SURFACE ( 'NONE', #15966, 10.00000000000009400, 0.7853981633974447300 ) ; +#74226 = ORIENTED_EDGE ( 'NONE', *, *, #45152, .T. ) ; +#74227 = AXIS2_PLACEMENT_3D ( 'NONE', #59124, #65430, #28169 ) ; +#74228 = CARTESIAN_POINT ( 'NONE', ( 11.74534273518457500, 20.50380841767821500, -28.64142799534455000 ) ) ; +#74229 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74230 = ORIENTED_EDGE ( 'NONE', *, *, #75061, .F. ) ; +#74231 = FACE_OUTER_BOUND ( 'NONE', #48836, .T. ) ; +#74232 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056689600, 35.04999999999997600, -28.70555803802995200 ) ) ; +#74233 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995400, 27.91684396980717200, -28.70555803802998100 ) ) ; +#74234 = ORIENTED_EDGE ( 'NONE', *, *, #79079, .T. ) ; +#74235 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#74236 = CARTESIAN_POINT ( 'NONE', ( 17.30192380577527800, 71.75831290081717400, -28.43753768099859500 ) ) ; +#74237 = ORIENTED_EDGE ( 'NONE', *, *, #58340, .F. ) ; +#74238 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310552400, 81.49769010897078700, -28.61774594594320900 ) ) ; +#74239 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74240 = AXIS2_PLACEMENT_3D ( 'NONE', #62315, #25036, #68557 ) ; +#74241 = ORIENTED_EDGE ( 'NONE', *, *, #1638, .F. ) ; +#74242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74243 = ORIENTED_EDGE ( 'NONE', *, *, #58990, .F. ) ; +#74244 = AXIS2_PLACEMENT_3D ( 'NONE', #70854, #33875, #21375 ) ; +#74245 = CARTESIAN_POINT ( 'NONE', ( -9.452258779925614400, 38.31967837323414000, -28.55467576046957500 ) ) ; +#74246 = AXIS2_PLACEMENT_3D ( 'NONE', #14921, #58431, #21194 ) ; +#74247 = CIRCLE ( 'NONE', #16577, 10.00000000000009400 ) ; +#74248 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34249, #9203, #28034, #77756 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823692541441200E-007, 0.0008724363063894277000 ), + .UNSPECIFIED. ) ; +#74249 = ADVANCED_FACE ( 'NONE', ( #33242 ), #31301, .T. ) ; +#74250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74251 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 80.52242369685794200, -28.53861367218593900 ) ) ; +#74252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74253 = EDGE_LOOP ( 'NONE', ( #13526, #70736, #1057, #59268, #44264 ) ) ; +#74254 = FACE_OUTER_BOUND ( 'NONE', #37820, .T. ) ; +#74255 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 26.83333333333335300, -9.205558038030003900 ) ) ; +#74256 = ORIENTED_EDGE ( 'NONE', *, *, #35009, .T. ) ; +#74257 = CARTESIAN_POINT ( 'NONE', ( 1.645813086124982400, 56.46717019299481400, -28.53914313452738200 ) ) ; +#74258 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300882300, 63.19621076493093900, -28.61864990621736000 ) ) ; +#74259 = ORIENTED_EDGE ( 'NONE', *, *, #55115, .T. ) ; +#74260 = EDGE_LOOP ( 'NONE', ( #75956, #29919, #44729 ) ) ; +#74261 = CIRCLE ( 'NONE', #58533, 10.00000000000009200 ) ; +#74262 = ORIENTED_EDGE ( 'NONE', *, *, #34998, .F. ) ; +#74263 = CONICAL_SURFACE ( 'NONE', #28425, 10.00000000000009200, 0.7853981633974447300 ) ; +#74264 = ADVANCED_FACE ( 'NONE', ( #49747 ), #78348, .T. ) ; +#74265 = AXIS2_PLACEMENT_3D ( 'NONE', #43531, #6296, #49777 ) ; +#74266 = CARTESIAN_POINT ( 'NONE', ( 10.77884208558771600, 41.43523632220588100, -28.30315276798567200 ) ) ; +#74267 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#74268 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74269 = ORIENTED_EDGE ( 'NONE', *, *, #66395, .F. ) ; +#74270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74271 = CARTESIAN_POINT ( 'NONE', ( -16.76916930534302700, 90.65007990305426200, -28.43638873268705700 ) ) ; +#74272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74273 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#74274 = FACE_OUTER_BOUND ( 'NONE', #59883, .T. ) ; +#74275 = ORIENTED_EDGE ( 'NONE', *, *, #27862, .T. ) ; +#74276 = ADVANCED_FACE ( 'NONE', ( #64415 ), #62442, .T. ) ; +#74277 = EDGE_CURVE ( 'NONE', #75712, #77746, #31925, .T. ) ; +#74278 = CONICAL_SURFACE ( 'NONE', #74379, 10.50000000000009200, 0.7853981633974482800 ) ; +#74279 = AXIS2_PLACEMENT_3D ( 'NONE', #30476, #24467, #67976 ) ; +#74280 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74281 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#74282 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 30.74660241562190100, -28.20555803802995200 ) ) ; +#74283 = ADVANCED_FACE ( 'NONE', ( #14741 ), #47555, .T. ) ; +#74284 = AXIS2_PLACEMENT_3D ( 'NONE', #12650, #37346, #68391 ) ; +#74285 = CARTESIAN_POINT ( 'NONE', ( -16.99797127827573500, 41.31091476818473800, -28.25432823872347400 ) ) ; +#74286 = ORIENTED_EDGE ( 'NONE', *, *, #56534, .F. ) ; +#74287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74288 = ORIENTED_EDGE ( 'NONE', *, *, #25838, .T. ) ; +#74289 = ADVANCED_FACE ( 'NONE', ( #79011 ), #12812, .T. ) ; +#74290 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 70.50000000000002800, -4.865812075874393000 ) ) ; +#74291 = AXIS2_PLACEMENT_3D ( 'NONE', #43250, #49219, #61785 ) ; +#74292 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#74293 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 35.50000000000000700, -7.061964498581016200 ) ) ; +#74294 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55882, #37366, #117, #43621 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629357050883600E-007, 0.0003902800319294280800 ), + .UNSPECIFIED. ) ; +#74295 = CONICAL_SURFACE ( 'NONE', #25112, 10.00000000000009200, 0.7853981633974447300 ) ; +#74296 = ORIENTED_EDGE ( 'NONE', *, *, #62645, .T. ) ; +#74297 = CONICAL_SURFACE ( 'NONE', #12291, 10.00000000000009600, 0.7853981633974482800 ) ; +#74298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74300 = EDGE_CURVE ( 'NONE', #35462, #56481, #17462, .T. ) ; +#74299 = EDGE_LOOP ( 'NONE', ( #4265, #30327, #19545 ) ) ; +#74301 = CARTESIAN_POINT ( 'NONE', ( 17.26470821603531600, 20.78298664431372000, -28.44647976475483700 ) ) ; +#74302 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74303 = CIRCLE ( 'NONE', #7396, 9.500000000000097700 ) ; +#74304 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 0.6666666666666765100, 2.794441961969992100 ) ) ; +#74305 = ORIENTED_EDGE ( 'NONE', *, *, #60418, .T. ) ; +#74306 = ORIENTED_EDGE ( 'NONE', *, *, #78479, .T. ) ; +#74307 = PLANE ( 'NONE', #65685 ) ; +#74308 = CARTESIAN_POINT ( 'NONE', ( -2.963744891818757700, 89.94924284854707300, -28.20555803803005900 ) ) ; +#74309 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54843, #11357, #73633, #36352 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694472379900E-007, 0.0008724363063896235000 ), + .UNSPECIFIED. ) ; +#74310 = CIRCLE ( 'NONE', #21224, 10.50000000000009600 ) ; +#74311 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754800, 30.39456479767151000, -28.70555803802995200 ) ) ; +#74313 = CIRCLE ( 'NONE', #14396, 10.00000000000009600 ) ; +#74312 = CARTESIAN_POINT ( 'NONE', ( 6.523705133725668400, 47.43535825203925100, -28.53896444442200300 ) ) ; +#74314 = VERTEX_POINT ( 'NONE', #54104 ) ; +#74315 = CARTESIAN_POINT ( 'NONE', ( -11.00202449666889300, 28.78907889423218300, -28.25433304472392800 ) ) ; +#74316 = EDGE_CURVE ( 'NONE', #3064, #70073, #2983, .T. ) ; +#74317 = CONICAL_SURFACE ( 'NONE', #17014, 10.50000000000009600, 0.7853981633974500600 ) ; +#74318 = EDGE_CURVE ( 'NONE', #15748, #54112, #69310, .T. ) ; +#74319 = VERTEX_POINT ( 'NONE', #35636 ) ; +#74320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74322 = ORIENTED_EDGE ( 'NONE', *, *, #63780, .F. ) ; +#74321 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51485, #7986, #20532, #64064 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962721776800, 0.0008252574424209642600 ), + .UNSPECIFIED. ) ; +#74323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74324 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965570000, 49.42298334620756600, -28.20555803802996700 ) ) ; +#74325 = EDGE_LOOP ( 'NONE', ( #12938, #77169, #17647 ) ) ; +#74326 = CARTESIAN_POINT ( 'NONE', ( -16.45968132316370000, 76.42850366851877200, -28.60315268788645300 ) ) ; +#74327 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143400, 39.07141756547892400, -28.70555803802995200 ) ) ; +#74328 = ORIENTED_EDGE ( 'NONE', *, *, #31163, .F. ) ; +#74329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74330 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000004400, 47.44142842854296300, -28.20555803802996700 ) ) ; +#74331 = FACE_OUTER_BOUND ( 'NONE', #25952, .T. ) ; +#74332 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310476400, 60.10230989102911500, -28.61774594594330900 ) ) ; +#74333 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 75.92347538297963200, -28.70555803803014400 ) ) ; +#74334 = CARTESIAN_POINT ( 'NONE', ( -9.875008334730035000, 60.01262610361151700, -28.29936525552471200 ) ) ; +#74335 = AXIS2_PLACEMENT_3D ( 'NONE', #3345, #15869, #59396 ) ; +#74336 = EDGE_CURVE ( 'NONE', #36405, #75399, #54844, .T. ) ; +#74337 = EDGE_CURVE ( 'NONE', #5847, #42777, #2076, .T. ) ; +#74339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26436, #57409, #63690, #69905 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.955157123653728000E-007, 0.0002959323803888981700 ), + .UNSPECIFIED. ) ; +#74338 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990900, 40.29999999999999000, -28.70555803802996700 ) ) ; +#74340 = EDGE_CURVE ( 'NONE', #57368, #881, #40377, .T. ) ; +#74341 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74342 = EDGE_LOOP ( 'NONE', ( #20245, #8229, #55450, #5768 ) ) ; +#74343 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826527500, 20.64948861668598900, -28.33414295261581000 ) ) ; +#74344 = EDGE_CURVE ( 'NONE', #24594, #60011, #136, .T. ) ; +#74345 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#74346 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74347 = AXIS2_PLACEMENT_3D ( 'NONE', #1807, #8069, #51572 ) ; +#74348 = ORIENTED_EDGE ( 'NONE', *, *, #15227, .T. ) ; +#74349 = CARTESIAN_POINT ( 'NONE', ( -9.769169305343025300, 90.65007990305426200, -28.43638873268705700 ) ) ; +#74350 = FACE_OUTER_BOUND ( 'NONE', #77306, .T. ) ; +#74351 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217475300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#74352 = CARTESIAN_POINT ( 'NONE', ( -10.13214618489072200, 18.47143078992715500, -28.37063977681164700 ) ) ; +#74353 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548964400, 49.65930907398620100, -28.35186440610858900 ) ) ; +#74354 = AXIS2_PLACEMENT_3D ( 'NONE', #7745, #51239, #14034 ) ; +#74355 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000464100, 80.52242369685791300, -28.53861367218606700 ) ) ; +#74356 = CARTESIAN_POINT ( 'NONE', ( -9.279102202939494500, 81.50050326225954200, -28.63287226700115100 ) ) ; +#74357 = FACE_OUTER_BOUND ( 'NONE', #80609, .T. ) ; +#74358 = ADVANCED_FACE ( 'NONE', ( #45844 ), #27415, .F. ) ; +#74359 = ORIENTED_EDGE ( 'NONE', *, *, #80407, .F. ) ; +#74360 = ADVANCED_FACE ( 'NONE', ( #16705 ), #75081, .F. ) ; +#74361 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 41.49999999999998600, -7.061964498581022400 ) ) ; +#74362 = AXIS2_PLACEMENT_3D ( 'NONE', #42383, #60928, #11418 ) ; +#74363 = EDGE_CURVE ( 'NONE', #2413, #39513, #25950, .T. ) ; +#74364 = ORIENTED_EDGE ( 'NONE', *, *, #73145, .F. ) ; +#74365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#74366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9403, #46649, #15675, #59185 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.228867774637808500E-017, 0.001246264537621212500 ), + .UNSPECIFIED. ) ; +#74367 = CARTESIAN_POINT ( 'NONE', ( -16.73584074218855400, 39.67436051799358400, -28.45080305021059500 ) ) ; +#74369 = ORIENTED_EDGE ( 'NONE', *, *, #39023, .T. ) ; +#74368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74370 = ADVANCED_FACE ( 'NONE', ( #47802 ), #30205, .T. ) ; +#74371 = CONICAL_SURFACE ( 'NONE', #38067, 10.00000000000009200, 0.7853981633974447300 ) ; +#74372 = ORIENTED_EDGE ( 'NONE', *, *, #74074, .F. ) ; +#74373 = CONICAL_SURFACE ( 'NONE', #8555, 10.50000000000009600, 0.7853981633974500600 ) ; +#74374 = ORIENTED_EDGE ( 'NONE', *, *, #26734, .F. ) ; +#74375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74376 = EDGE_CURVE ( 'NONE', #30212, #10456, #11489, .T. ) ; +#74377 = VERTEX_POINT ( 'NONE', #42652 ) ; +#74378 = CIRCLE ( 'NONE', #34473, 9.500000000000097700 ) ; +#74379 = AXIS2_PLACEMENT_3D ( 'NONE', #41858, #48090, #79152 ) ; +#74380 = CIRCLE ( 'NONE', #62784, 10.00000000000009400 ) ; +#74381 = AXIS2_PLACEMENT_3D ( 'NONE', #16627, #4376, #22888 ) ; +#74382 = EDGE_LOOP ( 'NONE', ( #77586, #34609, #38054 ) ) ; +#74383 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 28.66749699759768400, -28.20555803802994200 ) ) ; +#74384 = ORIENTED_EDGE ( 'NONE', *, *, #55947, .T. ) ; +#74385 = ORIENTED_EDGE ( 'NONE', *, *, #66974, .T. ) ; +#74386 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528153100, 9.968680884981223400, -28.51286550264508800 ) ) ; +#74387 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 12.83333333333334100, 9.794441961969999600 ) ) ; +#74388 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74389 = FACE_OUTER_BOUND ( 'NONE', #1585, .T. ) ; +#74390 = ORIENTED_EDGE ( 'NONE', *, *, #31556, .F. ) ; +#74391 = AXIS2_PLACEMENT_3D ( 'NONE', #29337, #4526, #72809 ) ; +#74392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74393 = CONICAL_SURFACE ( 'NONE', #77409, 10.50000000000009600, 0.7853981633974518300 ) ; +#74394 = ORIENTED_EDGE ( 'NONE', *, *, #16533, .F. ) ; +#74395 = ORIENTED_EDGE ( 'NONE', *, *, #63517, .F. ) ; +#74396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74397 = ORIENTED_EDGE ( 'NONE', *, *, #26326, .F. ) ; +#74398 = ORIENTED_EDGE ( 'NONE', *, *, #39841, .T. ) ; +#74399 = CARTESIAN_POINT ( 'NONE', ( -7.238199452804058100, 33.15857157145700300, -28.37229765499281000 ) ) ; +#74400 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890762800, 41.12856921007283300, -28.37063977681169600 ) ) ; +#74401 = ORIENTED_EDGE ( 'NONE', *, *, #8037, .T. ) ; +#74402 = CIRCLE ( 'NONE', #54339, 10.00000000000009200 ) ; +#74403 = AXIS2_PLACEMENT_3D ( 'NONE', #55082, #17843, #61385 ) ; +#74404 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #826, #38082, #13384, #56873 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735867376600E-007, 0.0008693051355035812400 ), + .UNSPECIFIED. ) ; +#74405 = ORIENTED_EDGE ( 'NONE', *, *, #28957, .F. ) ; +#74406 = CARTESIAN_POINT ( 'NONE', ( 5.200545803703474400, 44.44999999999998900, 4.873448734756340900 ) ) ; +#74407 = VERTEX_POINT ( 'NONE', #11691 ) ; +#74408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#74410 = EDGE_CURVE ( 'NONE', #62206, #61057, #77787, .T. ) ; +#74411 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 47.33333333333334300, -5.535685056952199400 ) ) ; +#74412 = EDGE_LOOP ( 'NONE', ( #1783, #62672, #54567 ) ) ; +#74413 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957520600, 32.09027028261002100, -28.70555803802995200 ) ) ; +#74414 = ORIENTED_EDGE ( 'NONE', *, *, #35717, .T. ) ; +#74415 = FACE_OUTER_BOUND ( 'NONE', #27240, .T. ) ; +#74416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74417 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34945, #29264, #47930, #10723 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674237361284700E-007, 0.0007606607323828873300 ), + .UNSPECIFIED. ) ; +#74418 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#74419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74420 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74421 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#74422 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187800, 30.96868088498122200, -28.51286550264512300 ) ) ; +#74423 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74424 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74425 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654559200, 71.32559822014178500, -28.29986836858018500 ) ) ; +#74426 = CARTESIAN_POINT ( 'NONE', ( -1.526184559857293000, 50.54999999999999700, -28.54256287284160700 ) ) ; +#74427 = EDGE_CURVE ( 'NONE', #26321, #26859, #60506, .T. ) ; +#74428 = CONICAL_SURFACE ( 'NONE', #40271, 10.50000000000009200, 0.7853981633974482800 ) ; +#74429 = CARTESIAN_POINT ( 'NONE', ( -16.45764012468389100, 55.17573043145937800, -28.60339038649757300 ) ) ; +#74430 = EDGE_CURVE ( 'NONE', #23151, #69375, #77020, .T. ) ; +#74431 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74432 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#74433 = CARTESIAN_POINT ( 'NONE', ( -1.077747210701865300, 85.79999999999984100, -28.70555803803014400 ) ) ; +#74434 = VERTEX_POINT ( 'NONE', #5420 ) ; +#74435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74437 = EDGE_CURVE ( 'NONE', #37752, #24894, #63354, .T. ) ; +#74439 = ORIENTED_EDGE ( 'NONE', *, *, #43783, .F. ) ; +#74438 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#74440 = ADVANCED_FACE ( 'NONE', ( #10851 ), #73140, .F. ) ; +#74441 = EDGE_CURVE ( 'NONE', #12957, #27440, #48843, .T. ) ; +#74442 = FACE_OUTER_BOUND ( 'NONE', #33569, .T. ) ; +#74443 = AXIS2_PLACEMENT_3D ( 'NONE', #60749, #79506, #73513 ) ; +#74444 = CIRCLE ( 'NONE', #29960, 10.50000000000009600 ) ; +#74445 = ORIENTED_EDGE ( 'NONE', *, *, #13444, .T. ) ; +#74446 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 71.25732391202396300, -28.20555803802997700 ) ) ; +#74447 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 53.66666666666668600, 4.294441961969993400 ) ) ; +#74448 = FACE_OUTER_BOUND ( 'NONE', #71265, .T. ) ; +#74449 = CIRCLE ( 'NONE', #67414, 10.00000000000009400 ) ; +#74450 = EDGE_LOOP ( 'NONE', ( #63461, #35070, #51690, #60074 ) ) ; +#74451 = VERTEX_POINT ( 'NONE', #12214 ) ; +#74452 = ADVANCED_FACE ( 'NONE', ( #58530 ), #40032, .T. ) ; +#74453 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 18.83333333333333900, -2.545304000185615800 ) ) ; +#74454 = AXIS2_PLACEMENT_3D ( 'NONE', #74420, #55622, #43373 ) ; +#74455 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74456 = EDGE_CURVE ( 'NONE', #19608, #22705, #56564, .T. ) ; +#74457 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #66187, #34911, #78703, #41399 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262669799630864400E-007, 0.0005050252131284528000 ), + .UNSPECIFIED. ) ; +#74458 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74459 = EDGE_CURVE ( 'NONE', #57293, #57143, #34412, .T. ) ; +#74460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74462 = CIRCLE ( 'NONE', #40364, 10.00000000000009200 ) ; +#74461 = AXIS2_PLACEMENT_3D ( 'NONE', #22657, #3857, #72445 ) ; +#74463 = EDGE_LOOP ( 'NONE', ( #51603, #43622, #30674 ) ) ; +#74464 = VECTOR ( 'NONE', #17797, 1000.000000000000000 ) ; +#74465 = ORIENTED_EDGE ( 'NONE', *, *, #24634, .F. ) ; +#74466 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454059400, 59.08026449164300000, -28.70555803803022200 ) ) ; +#74467 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 9.802775742211538900, -28.32715733700493000 ) ) ; +#74468 = ORIENTED_EDGE ( 'NONE', *, *, #12252, .F. ) ; +#74469 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 21.16666666666667100, -4.152999154772358800 ) ) ; +#74470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74471 = ORIENTED_EDGE ( 'NONE', *, *, #21843, .F. ) ; +#74472 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999991600, 39.69949493661175700, -28.70555803802995200 ) ) ; +#74473 = ORIENTED_EDGE ( 'NONE', *, *, #45707, .T. ) ; +#74474 = EDGE_CURVE ( 'NONE', #24389, #69640, #19951, .T. ) ; +#74475 = CIRCLE ( 'NONE', #29860, 10.00000000000009200 ) ; +#74476 = AXIS2_PLACEMENT_3D ( 'NONE', #15521, #59027, #21785 ) ; +#74477 = ORIENTED_EDGE ( 'NONE', *, *, #7437, .T. ) ; +#74478 = AXIS2_PLACEMENT_3D ( 'NONE', #13460, #56957, #19702 ) ; +#74479 = CARTESIAN_POINT ( 'NONE', ( -1.616843969807103300, 64.79999999999975600, -28.70555803803014400 ) ) ; +#74480 = CARTESIAN_POINT ( 'NONE', ( -8.116254736416749400, 14.04999999999997800, -28.53994725305373200 ) ) ; +#74481 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74482 = ADVANCED_FACE ( 'NONE', ( #43895 ), #71169, .F. ) ; +#74483 = CARTESIAN_POINT ( 'NONE', ( -15.32687855104136100, 25.69460332487161100, -28.70130020486395100 ) ) ; +#74484 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428100, 33.17681279774500100, -28.70555803802996700 ) ) ; +#74485 = VERTEX_POINT ( 'NONE', #31519 ) ; +#74486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74487 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#74488 = ORIENTED_EDGE ( 'NONE', *, *, #20582, .F. ) ; +#74489 = CIRCLE ( 'NONE', #23123, 10.00000000000009200 ) ; +#74490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74491 = AXIS2_PLACEMENT_3D ( 'NONE', #9947, #53463, #16212 ) ; +#74492 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49788, #31089, #37555, #316 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478981340243700E-007, 0.0002930330874878115400 ), + .UNSPECIFIED. ) ; +#74493 = CARTESIAN_POINT ( 'NONE', ( -3.976840323493579600, 31.01912043132478300, -28.30223257055573400 ) ) ; +#74494 = CARTESIAN_POINT ( 'NONE', ( -16.98603156328924200, 10.23798719401658600, -28.29447340919112400 ) ) ; +#74495 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79472, #35934, #11204, #54693 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.356538679906350400E-015, 0.001492013864198092600 ), + .UNSPECIFIED. ) ; +#74497 = PLANE ( 'NONE', #35312 ) ; +#74498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74499 = CARTESIAN_POINT ( 'NONE', ( -10.29582285685831000, 9.519451428761128000, -28.52576311647842600 ) ) ; +#74500 = AXIS2_PLACEMENT_3D ( 'NONE', #74571, #15, #31049 ) ; +#74501 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 24.66666666666667500, 5.722645192245505700 ) ) ; +#74502 = CONICAL_SURFACE ( 'NONE', #19930, 10.00000000000009600, 0.7853981633974447300 ) ; +#74503 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#74504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38092, #25636, #7090, #50588 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002699640600293685500, 0.0007746639185392655700 ), + .UNSPECIFIED. ) ; +#74505 = ORIENTED_EDGE ( 'NONE', *, *, #62775, .T. ) ; +#74506 = VERTEX_POINT ( 'NONE', #479 ) ; +#74507 = CONICAL_SURFACE ( 'NONE', #59873, 10.50000000000009600, 0.7853981633974500600 ) ; +#74508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74509 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74510 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000104800, 19.29999999999999000, -28.70555803802994200 ) ) ; +#74511 = ORIENTED_EDGE ( 'NONE', *, *, #56078, .F. ) ; +#74512 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344343800, 41.67701665379242100, -28.20555803802997400 ) ) ; +#74513 = EDGE_CURVE ( 'NONE', #25931, #33406, #5485, .T. ) ; +#74514 = CARTESIAN_POINT ( 'NONE', ( -9.343046065459551700, 82.51973550835661800, -28.70555803802996700 ) ) ; +#74515 = FACE_OUTER_BOUND ( 'NONE', #19641, .T. ) ; +#74516 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 50.19949493661175700, -28.70555803802996700 ) ) ; +#74517 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#74518 = CIRCLE ( 'NONE', #17887, 10.00000000000009400 ) ; +#74519 = AXIS2_PLACEMENT_3D ( 'NONE', #2459, #64535, #8714 ) ; +#74520 = ORIENTED_EDGE ( 'NONE', *, *, #59818, .T. ) ; +#74521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74522 = CONICAL_SURFACE ( 'NONE', #31264, 10.50000000000009900, 0.7853981633974518300 ) ; +#74523 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74524 = VERTEX_POINT ( 'NONE', #37732 ) ; +#74525 = CARTESIAN_POINT ( 'NONE', ( -15.48501075492351500, 83.03944396378861400, -28.70555803803001300 ) ) ; +#74526 = VERTEX_POINT ( 'NONE', #19256 ) ; +#74527 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#74528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74529 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22375, #59658, #34901, #78422 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0007606633682806951800 ), + .UNSPECIFIED. ) ; +#74530 = FACE_OUTER_BOUND ( 'NONE', #59069, .T. ) ; +#74531 = ADVANCED_FACE ( 'NONE', ( #25455 ), #38046, .T. ) ; +#74532 = FACE_OUTER_BOUND ( 'NONE', #50999, .T. ) ; +#74533 = ORIENTED_EDGE ( 'NONE', *, *, #5558, .T. ) ; +#74534 = EDGE_CURVE ( 'NONE', #12400, #28971, #71821, .T. ) ; +#74535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74536 = ORIENTED_EDGE ( 'NONE', *, *, #36423, .T. ) ; +#74537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74538 = EDGE_LOOP ( 'NONE', ( #22232, #77067, #7689, #1425 ) ) ; +#74539 = EDGE_CURVE ( 'NONE', #35406, #23348, #57335, .T. ) ; +#74540 = ORIENTED_EDGE ( 'NONE', *, *, #23622, .T. ) ; +#74541 = EDGE_LOOP ( 'NONE', ( #4658, #9876, #70933 ) ) ; +#74542 = ADVANCED_FACE ( 'NONE', ( #23500 ), #4986, .F. ) ; +#74543 = FACE_OUTER_BOUND ( 'NONE', #80492, .T. ) ; +#74544 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 68.33333333333334300, 3.124568980892187500 ) ) ; +#74545 = VERTEX_POINT ( 'NONE', #75547 ) ; +#74546 = ORIENTED_EDGE ( 'NONE', *, *, #10895, .F. ) ; +#74547 = EDGE_CURVE ( 'NONE', #47561, #76201, #42867, .T. ) ; +#74548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74549 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 33.33333333333335000, 5.722645192245503900 ) ) ; +#74550 = EDGE_CURVE ( 'NONE', #26090, #45954, #28469, .T. ) ; +#74551 = EDGE_LOOP ( 'NONE', ( #76252, #23508, #66035 ) ) ; +#74552 = FACE_OUTER_BOUND ( 'NONE', #5200, .T. ) ; +#74553 = AXIS2_PLACEMENT_3D ( 'NONE', #33343, #76851, #39589 ) ; +#74555 = ORIENTED_EDGE ( 'NONE', *, *, #33049, .F. ) ; +#74554 = CARTESIAN_POINT ( 'NONE', ( -16.79415140346247200, 71.39409401757625100, -28.39369363572360400 ) ) ; +#74556 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474189800, 17.73827450271713600, -28.47230003642276600 ) ) ; +#74557 = ADVANCED_FACE ( 'NONE', ( #6931 ), #52652, .F. ) ; +#74558 = VERTEX_POINT ( 'NONE', #1281 ) ; +#74559 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74560 = ADVANCED_FACE ( 'NONE', ( #21554 ), #19584, .F. ) ; +#74561 = FACE_OUTER_BOUND ( 'NONE', #57167, .T. ) ; +#74562 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 70.66666666666665700, -6.705558038030000400 ) ) ; +#74563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74564 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146282700, 90.34267608797584600, -28.20555803803047800 ) ) ; +#74565 = AXIS2_PLACEMENT_3D ( 'NONE', #4242, #47745, #10513 ) ; +#74566 = EDGE_CURVE ( 'NONE', #76937, #11933, #36139, .T. ) ; +#74567 = EDGE_CURVE ( 'NONE', #167, #1277, #8850, .T. ) ; +#74568 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#74569 = EDGE_CURVE ( 'NONE', #58909, #7519, #13963, .T. ) ; +#74570 = ADVANCED_FACE ( 'NONE', ( #54621 ), #34179, .F. ) ; +#74571 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.70555803802997700 ) ) ; +#74572 = CARTESIAN_POINT ( 'NONE', ( -11.78020271195752500, 32.09027028261002100, -28.70555803802995600 ) ) ; +#74573 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534573800, 19.60079448659600100, -28.70555803802994200 ) ) ; +#74574 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#74575 = AXIS2_PLACEMENT_3D ( 'NONE', #17599, #73616, #36333 ) ; +#74576 = FACE_OUTER_BOUND ( 'NONE', #10070, .T. ) ; +#74577 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#74578 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345425700, 61.32559822014179200, -28.29986836858017400 ) ) ; +#74579 = CONICAL_SURFACE ( 'NONE', #30628, 10.00000000000009400, 0.7853981633974447300 ) ; +#74580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74581 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.70555803803025800 ) ) ; +#74582 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71928, #22148, #40904, #3622 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183071500, 0.005168056621191836500 ), + .UNSPECIFIED. ) ; +#74583 = CARTESIAN_POINT ( 'NONE', ( 8.498152090609195900, 44.91466791010194000, -28.53910738522644100 ) ) ; +#74584 = VERTEX_POINT ( 'NONE', #76351 ) ; +#74585 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#74586 = EDGE_CURVE ( 'NONE', #36504, #74545, #50691, .T. ) ; +#74587 = ORIENTED_EDGE ( 'NONE', *, *, #12479, .T. ) ; +#74588 = CIRCLE ( 'NONE', #64532, 10.00000000000009200 ) ; +#74589 = CARTESIAN_POINT ( 'NONE', ( 9.071428571428581800, 28.57141756547892800, -28.70555803802994200 ) ) ; +#74590 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74591 = AXIS2_PLACEMENT_3D ( 'NONE', #38574, #13875, #32627 ) ; +#74592 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74593 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#74594 = EDGE_LOOP ( 'NONE', ( #74505, #59939, #48137 ) ) ; +#74595 = CARTESIAN_POINT ( 'NONE', ( -3.464812346016866900, 9.406791769321907600, -28.68794773163824300 ) ) ; +#74596 = CARTESIAN_POINT ( 'NONE', ( 3.360497072202814000, 20.43250300240229200, -28.25438406275897000 ) ) ; +#74597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74598 = CARTESIAN_POINT ( 'NONE', ( -5.294162141782172700, 45.54999999999999700, -28.37136602294610900 ) ) ; +#74599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74600 = CONICAL_SURFACE ( 'NONE', #31211, 10.00000000000009400, 0.7853981633974447300 ) ; +#74601 = CONICAL_SURFACE ( 'NONE', #44873, 10.50000000000009600, 0.7853981633974500600 ) ; +#74602 = VERTEX_POINT ( 'NONE', #32829 ) ; +#74603 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285890300, 87.92318720225479500, -28.70555803803030800 ) ) ; +#74604 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#74605 = ORIENTED_EDGE ( 'NONE', *, *, #74839, .F. ) ; +#74606 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.932503002402297600, -28.20555803802994200 ) ) ; +#74607 = ORIENTED_EDGE ( 'NONE', *, *, #6731, .T. ) ; +#74608 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#74609 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099068600, 41.53732497909461300, -28.41043597897463600 ) ) ; +#74610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74611 = AXIS2_PLACEMENT_3D ( 'NONE', #55189, #42669, #17946 ) ; +#74612 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74613 = CIRCLE ( 'NONE', #12155, 10.50000000000009600 ) ; +#74614 = AXIS2_PLACEMENT_3D ( 'NONE', #22647, #66171, #28945 ) ; +#74615 = VERTEX_POINT ( 'NONE', #51567 ) ; +#74616 = ORIENTED_EDGE ( 'NONE', *, *, #37024, .T. ) ; +#74617 = ORIENTED_EDGE ( 'NONE', *, *, #4124, .F. ) ; +#74618 = ORIENTED_EDGE ( 'NONE', *, *, #34899, .T. ) ; +#74619 = ORIENTED_EDGE ( 'NONE', *, *, #30933, .T. ) ; +#74620 = FACE_OUTER_BOUND ( 'NONE', #45515, .T. ) ; +#74621 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 39.33333333333334300, 2.794441961969998300 ) ) ; +#74622 = CARTESIAN_POINT ( 'NONE', ( 0.4762948662743077300, 57.93535825203925100, -28.53896444442198500 ) ) ; +#74623 = AXIS2_PLACEMENT_3D ( 'NONE', #16240, #59761, #22491 ) ; +#74624 = ORIENTED_EDGE ( 'NONE', *, *, #73718, .T. ) ; +#74625 = ORIENTED_EDGE ( 'NONE', *, *, #59059, .T. ) ; +#74626 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#74627 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 67.94142842854287800, -28.20555803803047800 ) ) ; +#74628 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44437, #958, #7195, #50720 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192577241100 ), + .UNSPECIFIED. ) ; +#74629 = ADVANCED_FACE ( 'NONE', ( #67279 ), #65366, .F. ) ; +#74630 = CONICAL_SURFACE ( 'NONE', #62796, 10.00000000000009200, 0.7853981633974447300 ) ; +#74631 = VERTEX_POINT ( 'NONE', #33113 ) ; +#74632 = AXIS2_PLACEMENT_3D ( 'NONE', #57789, #76271, #1738 ) ; +#74633 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#74634 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #75256, #31745, #6968, #50455 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962241296000, 0.0005195704752302263900 ), + .UNSPECIFIED. ) ; +#74635 = EDGE_LOOP ( 'NONE', ( #67323, #17636, #21692, #80579, #35528 ) ) ; +#74636 = CIRCLE ( 'NONE', #40728, 10.00000000000009200 ) ; +#74637 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78689, #10404, #36505, #80048 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001735021124194114500 ), + .UNSPECIFIED. ) ; +#74639 = CONICAL_SURFACE ( 'NONE', #54831, 10.50000000000009800, 0.7853981633974518300 ) ; +#74640 = ADVANCED_FACE ( 'NONE', ( #69222 ), #39341, .T. ) ; +#74641 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74643 = ORIENTED_EDGE ( 'NONE', *, *, #51730, .T. ) ; +#74642 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#74644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74646 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 71.43250300240197200, -28.20555803803047800 ) ) ; +#74647 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 10.66666666666667500, -10.73183747965883100 ) ) ; +#74648 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47209, #3707, #53503, #16253 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736096602200E-007, 0.0009376786059871995000 ), + .UNSPECIFIED. ) ; +#74649 = CARTESIAN_POINT ( 'NONE', ( 17.06687702944361000, 31.29955846777003700, -28.38339015421975000 ) ) ; +#74650 = EDGE_CURVE ( 'NONE', #65707, #12332, #80270, .T. ) ; +#74651 = LINE ( 'NONE', #49415, #26978 ) ; +#74652 = EDGE_LOOP ( 'NONE', ( #8933, #20486, #38568 ) ) ; +#74653 = ADVANCED_FACE ( 'NONE', ( #1064 ), #15680, .F. ) ; +#74654 = EDGE_CURVE ( 'NONE', #58834, #52604, #65838, .T. ) ; +#74655 = CONICAL_SURFACE ( 'NONE', #14397, 10.00000000000009400, 0.7853981633974447300 ) ; +#74656 = VERTEX_POINT ( 'NONE', #8596 ) ; +#74657 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#74658 = ORIENTED_EDGE ( 'NONE', *, *, #34051, .T. ) ; +#74659 = CONICAL_SURFACE ( 'NONE', #39952, 10.50000000000009800, 0.7853981633974518300 ) ; +#74660 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#74661 = EDGE_CURVE ( 'NONE', #1643, #39176, #51307, .T. ) ; +#74662 = EDGE_LOOP ( 'NONE', ( #62388, #2690, #71463, #47876, #4906, #1152 ) ) ; +#74663 = ADVANCED_FACE ( 'NONE', ( #17650 ), #63389, .F. ) ; +#74664 = PLANE ( 'NONE', #52533 ) ; +#74665 = EDGE_CURVE ( 'NONE', #68330, #61551, #79923, .T. ) ; +#74666 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 82.97376207875059600, -28.70555803802997700 ) ) ; +#74667 = FACE_OUTER_BOUND ( 'NONE', #77832, .T. ) ; +#74668 = CONICAL_SURFACE ( 'NONE', #56809, 10.50000000000009800, 0.7853981633974518300 ) ; +#74669 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 45.16666666666667100, 3.794441961969996900 ) ) ; +#74670 = ORIENTED_EDGE ( 'NONE', *, *, #16576, .F. ) ; +#74671 = EDGE_CURVE ( 'NONE', #52291, #2388, #48743, .T. ) ; +#74672 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74673 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#74674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30953, #80715, #18698, #62232 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572409717700E-007, 0.0004669842289003298800 ), + .UNSPECIFIED. ) ; +#74675 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74676 = CARTESIAN_POINT ( 'NONE', ( 3.736806959389305000, 92.73236790253328400, -28.64516875322535900 ) ) ; +#74677 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#74678 = ORIENTED_EDGE ( 'NONE', *, *, #54962, .F. ) ; +#74679 = ADVANCED_FACE ( 'NONE', ( #29393 ), #42659, .T. ) ; +#74680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74681 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#74682 = AXIS2_PLACEMENT_3D ( 'NONE', #21438, #77442, #40167 ) ; +#74683 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74684 = EDGE_CURVE ( 'NONE', #21643, #17566, #36868, .T. ) ; +#74685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8308, #76330, #76595, #14594 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487877700 ), + .UNSPECIFIED. ) ; +#74686 = EDGE_CURVE ( 'NONE', #42171, #23418, #3016, .T. ) ; +#74687 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#74688 = EDGE_CURVE ( 'NONE', #35438, #55722, #22437, .T. ) ; +#74689 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034430900, 20.67701665379241000, -28.20555803802994500 ) ) ; +#74690 = CONICAL_SURFACE ( 'NONE', #30864, 10.50000000000009600, 0.7853981633974518300 ) ; +#74691 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74693 = ORIENTED_EDGE ( 'NONE', *, *, #18321, .F. ) ; +#74694 = AXIS2_PLACEMENT_3D ( 'NONE', #55688, #43174, #61988 ) ; +#74695 = CARTESIAN_POINT ( 'NONE', ( -17.14651939117049700, 52.51488052429280600, -28.47263588290807600 ) ) ; +#74696 = ORIENTED_EDGE ( 'NONE', *, *, #24153, .T. ) ; +#74697 = VERTEX_POINT ( 'NONE', #59195 ) ; +#74698 = ORIENTED_EDGE ( 'NONE', *, *, #37010, .F. ) ; +#74699 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492377200, 10.52620220503713400, -28.70555803802992800 ) ) ; +#74700 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#74701 = AXIS2_PLACEMENT_3D ( 'NONE', #22452, #65982, #28758 ) ; +#74702 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#74703 = AXIS2_PLACEMENT_3D ( 'NONE', #11443, #54933, #17695 ) ; +#74704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74705 = VERTEX_POINT ( 'NONE', #9413 ) ; +#74706 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274327200, 26.43535825203924700, -28.53896444442197800 ) ) ; +#74707 = PLANE ( 'NONE', #73905 ) ; +#74708 = CIRCLE ( 'NONE', #15831, 10.50000000000009600 ) ; +#74709 = ORIENTED_EDGE ( 'NONE', *, *, #35257, .T. ) ; +#74710 = ORIENTED_EDGE ( 'NONE', *, *, #28459, .F. ) ; +#74711 = CARTESIAN_POINT ( 'NONE', ( -2.572261083207502800, 8.799999999999828400, -28.63329695482267900 ) ) ; +#74712 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 51.50000000000001400, -9.258116921287651700 ) ) ; +#74713 = EDGE_LOOP ( 'NONE', ( #46092, #17733, #69956, #7501 ) ) ; +#74714 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74715 = CONICAL_SURFACE ( 'NONE', #42792, 10.50000000000009600, 0.7853981633974500600 ) ; +#74716 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 16.66666666666667500, 1.294441961969997200 ) ) ; +#74717 = AXIS2_PLACEMENT_3D ( 'NONE', #35571, #10271, #4545 ) ; +#74718 = VERTEX_POINT ( 'NONE', #77691 ) ; +#74719 = CARTESIAN_POINT ( 'NONE', ( 10.98575180313163300, 60.01994747561619200, -28.24986299608861600 ) ) ; +#74720 = CARTESIAN_POINT ( 'NONE', ( 12.88374526358325600, 24.54999999999998600, -28.53994725305375000 ) ) ; +#74721 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74722 = CIRCLE ( 'NONE', #50489, 10.00000000000009400 ) ; +#74723 = ORIENTED_EDGE ( 'NONE', *, *, #45320, .T. ) ; +#74724 = CARTESIAN_POINT ( 'NONE', ( 11.23083069465684700, 80.65007990305395000, -28.43638873268742600 ) ) ; +#74726 = EDGE_CURVE ( 'NONE', #59592, #79993, #46791, .T. ) ; +#74725 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7805, #76086, #57596, #20341 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392206243600E-007, 0.0003301092607755734800 ), + .UNSPECIFIED. ) ; +#74727 = CARTESIAN_POINT ( 'NONE', ( -2.428612866367529900E-014, 57.22261628933272700, -28.70555803802997700 ) ) ; +#74728 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 19.00000000000000400, -1.205558038030002800 ) ) ; +#74729 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#74730 = AXIS2_PLACEMENT_3D ( 'NONE', #64368, #70571, #20810 ) ; +#74731 = ORIENTED_EDGE ( 'NONE', *, *, #21198, .T. ) ; +#74732 = CONICAL_SURFACE ( 'NONE', #32095, 10.50000000000009600, 0.7853981633974500600 ) ; +#74733 = VERTEX_POINT ( 'NONE', #71728 ) ; +#74734 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74735 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74736 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74737 = CARTESIAN_POINT ( 'NONE', ( -17.04393630873280300, 69.89196326503821400, -28.29033182162383000 ) ) ; +#74738 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46571, #33840, #59115, #21871 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.919124238435201600E-005, 0.0003659026359586744800 ), + .UNSPECIFIED. ) ; +#74739 = CARTESIAN_POINT ( 'NONE', ( -10.97684032349358300, 41.51912043132477900, -28.30223257055575600 ) ) ; +#74740 = AXIS2_PLACEMENT_3D ( 'NONE', #65834, #28598, #72102 ) ; +#74741 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305611100, 79.70395328581609800, -28.70555803802999500 ) ) ; +#74742 = FACE_OUTER_BOUND ( 'NONE', #52472, .T. ) ; +#74743 = ORIENTED_EDGE ( 'NONE', *, *, #9469, .T. ) ; +#74744 = CARTESIAN_POINT ( 'NONE', ( -16.49262442484927900, 82.31032580521097900, -28.59353418718932400 ) ) ; +#74745 = ADVANCED_FACE ( 'NONE', ( #31793 ), #77967, .T. ) ; +#74746 = CARTESIAN_POINT ( 'NONE', ( -16.87500833473003000, 70.01262610361133900, -28.29936525552463100 ) ) ; +#74747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74748 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#74749 = CARTESIAN_POINT ( 'NONE', ( 16.88106447389093000, 60.49763722318510200, -28.32100408376079400 ) ) ; +#74750 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 79.97246552159074900, -28.38801640354893500 ) ) ; +#74751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74752 = ADVANCED_FACE ( 'NONE', ( #41975 ), #56173, .F. ) ; +#74753 = VERTEX_POINT ( 'NONE', #73100 ) ; +#74754 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596600, 83.65857157145701700, -28.37229765499279600 ) ) ; +#74755 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754700, 40.89456479767149900, -28.70555803802996700 ) ) ; +#74756 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14672, #2125, #2405, #45903 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632881349700E-007, 0.0004064396303279732200 ), + .UNSPECIFIED. ) ; +#74757 = ADVANCED_FACE ( 'NONE', ( #44081 ), #6547, .F. ) ; +#74758 = CIRCLE ( 'NONE', #65043, 10.00000000000009200 ) ; +#74760 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973405000, 77.33501542110256800, -28.70555803803001600 ) ) ; +#74759 = CARTESIAN_POINT ( 'NONE', ( 13.08245618894334500, 45.55000000000000400, -28.70555803802996700 ) ) ; +#74761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74762 = FACE_OUTER_BOUND ( 'NONE', #65114, .T. ) ; +#74763 = ORIENTED_EDGE ( 'NONE', *, *, #22594, .F. ) ; +#74764 = EDGE_LOOP ( 'NONE', ( #46238, #38448, #48279, #57730 ) ) ; +#74765 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510926000, 39.47143078992716200, -28.37063977681168200 ) ) ; +#74766 = EDGE_CURVE ( 'NONE', #46517, #24812, #23122, .T. ) ; +#74767 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 22.49999999999999300, -7.061964498581022400 ) ) ; +#74768 = PLANE ( 'NONE', #44878 ) ; +#74769 = VERTEX_POINT ( 'NONE', #17328 ) ; +#74770 = EDGE_LOOP ( 'NONE', ( #55563, #6545, #58918, #58860 ) ) ; +#74771 = EDGE_LOOP ( 'NONE', ( #26614, #35853, #7300, #19027 ) ) ; +#74772 = EDGE_LOOP ( 'NONE', ( #62569, #40672, #43290, #27450 ) ) ; +#74773 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74774 = CARTESIAN_POINT ( 'NONE', ( -9.964079643063250600, 39.00210619075101400, -28.25343951603329300 ) ) ; +#74776 = ORIENTED_EDGE ( 'NONE', *, *, #57189, .T. ) ; +#74775 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571448400, 60.07141756547892400, -28.70555803802997700 ) ) ; +#74777 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#74778 = CARTESIAN_POINT ( 'NONE', ( -2.233092656312639400, 75.80000000000507000, -28.70555803803014400 ) ) ; +#74779 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44872, #38635, #69142, #7636 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215304702700E-007, 0.0007606633682817595400 ), + .UNSPECIFIED. ) ; +#74780 = CARTESIAN_POINT ( 'NONE', ( 15.05230528786095000, 65.75869881725270700, -28.70545453106903000 ) ) ; +#74781 = CARTESIAN_POINT ( 'NONE', ( -9.655202348769025300, 30.31139552890385900, -28.53900456328626600 ) ) ; +#74782 = ORIENTED_EDGE ( 'NONE', *, *, #43899, .T. ) ; +#74783 = FACE_OUTER_BOUND ( 'NONE', #63515, .T. ) ; +#74784 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74785 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#74786 = EDGE_CURVE ( 'NONE', #7615, #74917, #7950, .T. ) ; +#74787 = CARTESIAN_POINT ( 'NONE', ( -1.314034490221688500, 24.54999999999998600, -28.37321477197627600 ) ) ; +#74789 = EDGE_CURVE ( 'NONE', #46519, #24220, #39638, .T. ) ; +#74788 = VERTEX_POINT ( 'NONE', #60864 ) ; +#74790 = ORIENTED_EDGE ( 'NONE', *, *, #33444, .T. ) ; +#74791 = CARTESIAN_POINT ( 'NONE', ( -4.118935526109117600, 61.10236277681498500, -28.32100408376067000 ) ) ; +#74792 = CARTESIAN_POINT ( 'NONE', ( 5.354186913875032000, 66.46717019299457300, -28.53914313452774800 ) ) ; +#74793 = CIRCLE ( 'NONE', #26639, 10.00000000000009200 ) ; +#74794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74795 = EDGE_CURVE ( 'NONE', #71340, #50903, #74309, .T. ) ; +#74796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74797 = EDGE_CURVE ( 'NONE', #79455, #30212, #59853, .T. ) ; +#74798 = EDGE_CURVE ( 'NONE', #39176, #47321, #45319, .T. ) ; +#74799 = EDGE_LOOP ( 'NONE', ( #1388, #20700, #68307, #20738 ) ) ; +#74800 = AXIS2_PLACEMENT_3D ( 'NONE', #5793, #49267, #12054 ) ; +#74801 = CARTESIAN_POINT ( 'NONE', ( 10.04027359854979600, 18.22437813624602000, -28.30310527599320700 ) ) ; +#74802 = CIRCLE ( 'NONE', #7741, 9.500000000000097700 ) ; +#74804 = ORIENTED_EDGE ( 'NONE', *, *, #59152, .F. ) ; +#74803 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719596900, 15.94142842854297500, -28.37229765499274200 ) ) ; +#74805 = ORIENTED_EDGE ( 'NONE', *, *, #14852, .T. ) ; +#74806 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#74807 = AXIS2_PLACEMENT_3D ( 'NONE', #74302, #25045, #49755 ) ; +#74808 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 66.16666666666670000, -6.205558038030004800 ) ) ; +#74809 = AXIS2_PLACEMENT_3D ( 'NONE', #79620, #42322, #5080 ) ; +#74810 = AXIS2_PLACEMENT_3D ( 'NONE', #79686, #42397, #5162 ) ; +#74811 = CARTESIAN_POINT ( 'NONE', ( -5.685965509778302600, 14.04999999999997800, -28.37321477197626500 ) ) ; +#74812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9397, #46642, #59175, #21930 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217711422351500E-007, 0.0008482615949374420900 ), + .UNSPECIFIED. ) ; +#74813 = CARTESIAN_POINT ( 'NONE', ( -10.75693756550920300, 81.43482212736795100, -28.29548618595820000 ) ) ; +#74814 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 31.16666666666668200, -9.205558038030003900 ) ) ; +#74815 = CARTESIAN_POINT ( 'NONE', ( 10.39037165690054600, 8.516676710273200600, -28.59744054000112000 ) ) ; +#74816 = CONICAL_SURFACE ( 'NONE', #45205, 10.50000000000009600, 0.7853981633974518300 ) ; +#74817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74818 = FACE_OUTER_BOUND ( 'NONE', #60132, .T. ) ; +#74819 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 68.50000000000002800, 6.847000845227641200 ) ) ; +#74820 = ORIENTED_EDGE ( 'NONE', *, *, #67855, .F. ) ; +#74821 = EDGE_LOOP ( 'NONE', ( #14123, #51475, #11637, #67058 ) ) ; +#74822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74823 = CARTESIAN_POINT ( 'NONE', ( -15.88358847658254500, 39.15151454780962600, -28.67627428870437400 ) ) ; +#74824 = AXIS2_PLACEMENT_3D ( 'NONE', #9051, #2808, #52579 ) ; +#74825 = EDGE_CURVE ( 'NONE', #28856, #51106, #30921, .T. ) ; +#74826 = CARTESIAN_POINT ( 'NONE', ( -2.963744891819353600, 69.94924284854693000, -28.20555803802997700 ) ) ; +#74827 = ADVANCED_FACE ( 'NONE', ( #25052 ), #4601, .F. ) ; +#74828 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#74829 = FACE_OUTER_BOUND ( 'NONE', #5980, .T. ) ; +#74830 = ORIENTED_EDGE ( 'NONE', *, *, #64931, .F. ) ; +#74831 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43505, #2, #68560, #31309, #74815, #37518, #265, #43769 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001335052463302535400, 0.002002578694953800800, 0.002670104926605066100 ), + .UNSPECIFIED. ) ; +#74832 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#74833 = CIRCLE ( 'NONE', #15118, 10.50000000000009600 ) ; +#74834 = ORIENTED_EDGE ( 'NONE', *, *, #14784, .T. ) ; +#74835 = ORIENTED_EDGE ( 'NONE', *, *, #9037, .F. ) ; +#74836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74837 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527471500, 24.23928571352700000, -28.36868303842826600 ) ) ; +#74838 = VERTEX_POINT ( 'NONE', #40196 ) ; +#74839 = EDGE_CURVE ( 'NONE', #6607, #68913, #16451, .T. ) ; +#74840 = FACE_OUTER_BOUND ( 'NONE', #66113, .T. ) ; +#74841 = CARTESIAN_POINT ( 'NONE', ( 10.05712673146704400, 17.80869142985005700, -28.37223374938559000 ) ) ; +#74842 = EDGE_LOOP ( 'NONE', ( #71264, #10886, #63140 ) ) ; +#74843 = ORIENTED_EDGE ( 'NONE', *, *, #27541, .F. ) ; +#74844 = CARTESIAN_POINT ( 'NONE', ( 9.438065798940481700, 39.11613388835919400, -28.57723500840078400 ) ) ; +#74845 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74846 = AXIS2_PLACEMENT_3D ( 'NONE', #65357, #28085, #71575 ) ; +#74847 = ORIENTED_EDGE ( 'NONE', *, *, #55004, .T. ) ; +#74848 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805696000, 12.41427200762530000, -28.67630847257078100 ) ) ; +#74849 = VERTEX_POINT ( 'NONE', #15471 ) ; +#74850 = VERTEX_POINT ( 'NONE', #58970 ) ; +#74851 = VERTEX_POINT ( 'NONE', #21735 ) ; +#74852 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74854 = ADVANCED_FACE ( 'NONE', ( #37664 ), #52247, .T. ) ; +#74855 = CARTESIAN_POINT ( 'NONE', ( 15.85159581707925200, 69.93589406416673200, -28.68054222049965000 ) ) ; +#74856 = ORIENTED_EDGE ( 'NONE', *, *, #18767, .T. ) ; +#74857 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36681, #80204, #55437, #18192 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885668727679600E-007, 0.0007987728781047483100 ), + .UNSPECIFIED. ) ; +#74859 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74860 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#74861 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#74862 = CONICAL_SURFACE ( 'NONE', #42228, 10.50000000000009400, 0.7853981633974500600 ) ; +#74863 = AXIS2_PLACEMENT_3D ( 'NONE', #49770, #12558, #56051 ) ; +#74864 = EDGE_LOOP ( 'NONE', ( #14768, #2757, #52790 ) ) ; +#74865 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#74866 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#74867 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818910400, 59.94924284854708700, -28.20555803802997700 ) ) ; +#74868 = ORIENTED_EDGE ( 'NONE', *, *, #46511, .F. ) ; +#74869 = ORIENTED_EDGE ( 'NONE', *, *, #54886, .T. ) ; +#74870 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30793, #80550, #24793, #68302 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641853934424500E-007, 0.0008759659331879515300 ), + .UNSPECIFIED. ) ; +#74871 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.23796787468681700, -28.38801640354855800 ) ) ; +#74872 = PLANE ( 'NONE', #31815 ) ; +#74873 = CIRCLE ( 'NONE', #41145, 10.50000000000009600 ) ; +#74874 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74875 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#74876 = ORIENTED_EDGE ( 'NONE', *, *, #13481, .T. ) ; +#74877 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74878 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#74879 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57318, #26063, #20072, #63592 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695385994778000E-007, 0.0007987676590763806300 ), + .UNSPECIFIED. ) ; +#74880 = ORIENTED_EDGE ( 'NONE', *, *, #73871, .T. ) ; +#74881 = ADVANCED_FACE ( 'NONE', ( #72753 ), #19196, .F. ) ; +#74882 = EDGE_CURVE ( 'NONE', #79056, #2702, #35748, .T. ) ; +#74883 = FACE_OUTER_BOUND ( 'NONE', #6334, .T. ) ; +#74884 = VERTEX_POINT ( 'NONE', #52972 ) ; +#74885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74886 = VERTEX_POINT ( 'NONE', #28282 ) ; +#74887 = ORIENTED_EDGE ( 'NONE', *, *, #19378, .T. ) ; +#74888 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 37.16666666666668600, -3.349151577478988200 ) ) ; +#74889 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537159100, 90.34267608797600200, -28.20555803802997700 ) ) ; +#74890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74891 = CARTESIAN_POINT ( 'NONE', ( -10.24306493325783100, 61.43482203710630800, -28.29548531138973300 ) ) ; +#74892 = EDGE_CURVE ( 'NONE', #67211, #24123, #1956, .T. ) ; +#74893 = CIRCLE ( 'NONE', #79116, 10.50000000000009600 ) ; +#74894 = FACE_OUTER_BOUND ( 'NONE', #43221, .T. ) ; +#74895 = ORIENTED_EDGE ( 'NONE', *, *, #40935, .T. ) ; +#74896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74897 = AXIS2_PLACEMENT_3D ( 'NONE', #80368, #43088, #5854 ) ; +#74898 = ORIENTED_EDGE ( 'NONE', *, *, #41574, .F. ) ; +#74899 = EDGE_CURVE ( 'NONE', #22471, #49449, #68298, .T. ) ; +#74900 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985148100, 13.09761904761851200, -28.70555803803042500 ) ) ; +#74901 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33907, #71172, #46368, #9124 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085750785901388800E-007, 0.0007677775503743753900 ), + .UNSPECIFIED. ) ; +#74902 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807117500, 86.79999999999992600, -28.70555803802997700 ) ) ; +#74903 = CARTESIAN_POINT ( 'NONE', ( 14.89966555183929800, 80.79999999999968500, -28.20555803803019400 ) ) ; +#74904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74905 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 8.500000000000007100, 6.847000845227646500 ) ) ; +#74906 = CIRCLE ( 'NONE', #22724, 9.500000000000099500 ) ; +#74908 = ORIENTED_EDGE ( 'NONE', *, *, #66429, .F. ) ; +#74907 = EDGE_CURVE ( 'NONE', #12400, #71770, #53840, .T. ) ; +#74909 = CIRCLE ( 'NONE', #40615, 9.500000000000097700 ) ; +#74910 = VERTEX_POINT ( 'NONE', #59527 ) ; +#74911 = AXIS2_PLACEMENT_3D ( 'NONE', #48615, #11402, #54895 ) ; +#74912 = CARTESIAN_POINT ( 'NONE', ( 9.997978530266239600, 28.78907435382948800, -28.25433648786264500 ) ) ; +#74913 = CONICAL_SURFACE ( 'NONE', #37596, 10.00000000000009200, 0.7853981633974447300 ) ; +#74914 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#74915 = ORIENTED_EDGE ( 'NONE', *, *, #10319, .F. ) ; +#74916 = ORIENTED_EDGE ( 'NONE', *, *, #8492, .F. ) ; +#74917 = VERTEX_POINT ( 'NONE', #34786 ) ; +#74918 = EDGE_LOOP ( 'NONE', ( #5809, #40475, #38831, #14806 ) ) ; +#74919 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 19.25227248018307700, -28.70555803803013400 ) ) ; +#74920 = EDGE_LOOP ( 'NONE', ( #1688, #13117, #3620, #79305 ) ) ; +#74921 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#74922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74923 = EDGE_LOOP ( 'NONE', ( #46720, #30842, #66669 ) ) ; +#74924 = AXIS2_PLACEMENT_3D ( 'NONE', #50472, #13273, #56762 ) ; +#74925 = ORIENTED_EDGE ( 'NONE', *, *, #39925, .F. ) ; +#74926 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 80.10230989102912200, -28.61774594594330900 ) ) ; +#74927 = EDGE_CURVE ( 'NONE', #46181, #77979, #39352, .T. ) ; +#74928 = EDGE_CURVE ( 'NONE', #74052, #12986, #21167, .T. ) ; +#74929 = ADVANCED_FACE ( 'NONE', ( #68831 ), #33787, .F. ) ; +#74931 = AXIS2_PLACEMENT_3D ( 'NONE', #54852, #17617, #49391 ) ; +#74930 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#74932 = ORIENTED_EDGE ( 'NONE', *, *, #41980, .F. ) ; +#74933 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 53.20037755566823300, -28.53664883431611400 ) ) ; +#74934 = CIRCLE ( 'NONE', #42706, 10.50000000000009600 ) ; +#74935 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 43.00000000000001400, -6.205558038030003100 ) ) ; +#74936 = ORIENTED_EDGE ( 'NONE', *, *, #27852, .T. ) ; +#74937 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74938 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964000, 28.65930907398619700, -28.35186440610856500 ) ) ; +#74939 = EDGE_LOOP ( 'NONE', ( #35274, #79459, #18750 ) ) ; +#74940 = VERTEX_POINT ( 'NONE', #47503 ) ; +#74941 = CIRCLE ( 'NONE', #23863, 9.500000000000099500 ) ; +#74942 = EDGE_CURVE ( 'NONE', #32745, #30876, #24927, .T. ) ; +#74943 = ADVANCED_FACE ( 'NONE', ( #54225 ), #41273, .T. ) ; +#74944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74945 = AXIS2_PLACEMENT_3D ( 'NONE', #57790, #20537, #64068 ) ; +#74946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36163, #23659, #5141, #48629 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351151527300E-007, 0.0003902800319293251300 ), + .UNSPECIFIED. ) ; +#74947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74948 = EDGE_LOOP ( 'NONE', ( #77098, #69579, #62530 ) ) ; +#74949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74951 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74952 = ORIENTED_EDGE ( 'NONE', *, *, #30064, .F. ) ; +#74953 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#74954 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890877100, 71.10236277681498500, -28.32100408376067300 ) ) ; +#74955 = CARTESIAN_POINT ( 'NONE', ( -2.466255859631235800, 91.59999999999999400, -28.70555803803007700 ) ) ; +#74956 = LINE ( 'NONE', #14003, #10735 ) ; +#74958 = ORIENTED_EDGE ( 'NONE', *, *, #5453, .T. ) ; +#74957 = ADVANCED_FACE ( 'NONE', ( #66898 ), #64967, .F. ) ; +#74959 = ADVANCED_FACE ( 'NONE', ( #50294 ), #31854, .T. ) ; +#74960 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61819, #43274, #62083, #24811 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099548293565000E-007, 0.0008759529789572291300 ), + .UNSPECIFIED. ) ; +#74961 = CARTESIAN_POINT ( 'NONE', ( -17.03295546792553900, 88.40241253122518100, -28.49829281932970600 ) ) ; +#74962 = ORIENTED_EDGE ( 'NONE', *, *, #21535, .T. ) ; +#74963 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 60.10230989102911500, -28.61774594594330900 ) ) ; +#74964 = CARTESIAN_POINT ( 'NONE', ( 9.844497922849321000, 9.820334718100438600, -28.30868034705248700 ) ) ; +#74965 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74966 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74967 = CARTESIAN_POINT ( 'NONE', ( 9.997971278275748800, 20.31091476818473800, -28.25432823872344600 ) ) ; +#74968 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74969 = ADVANCED_FACE ( 'NONE', ( #17247 ), #66580, .T. ) ; +#74970 = AXIS2_PLACEMENT_3D ( 'NONE', #22209, #65746, #28508 ) ; +#74971 = CIRCLE ( 'NONE', #40128, 10.00000000000009400 ) ; +#74972 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 49.33333333333335700, 8.320721403598817300 ) ) ; +#74973 = EDGE_LOOP ( 'NONE', ( #40096, #30544, #7656 ) ) ; +#74974 = VERTEX_POINT ( 'NONE', #79102 ) ; +#74975 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.16749699759768800, -28.20555803802992800 ) ) ; +#74976 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 14.50000000000000400, -4.865812075874393000 ) ) ; +#74977 = AXIS2_PLACEMENT_3D ( 'NONE', #74487, #18447, #43441 ) ; +#74978 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000479200, 18.52242369685794500, -28.53861367218605600 ) ) ; +#74979 = CARTESIAN_POINT ( 'NONE', ( -11.72090442826402100, 61.50050415885242200, -28.63287458792238400 ) ) ; +#74980 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35980, #79768, #61296, #24014 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122921412900, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#74981 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 89.94924284854739900, -28.20555803802997700 ) ) ; +#74982 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.66749699759768800, -28.20555803802994200 ) ) ; +#74983 = EDGE_CURVE ( 'NONE', #28286, #32367, #2619, .T. ) ; +#74984 = CIRCLE ( 'NONE', #53927, 10.00000000000009400 ) ; +#74985 = ORIENTED_EDGE ( 'NONE', *, *, #80758, .T. ) ; +#74986 = CARTESIAN_POINT ( 'NONE', ( -17.90255987543115900, 30.86477483291889000, -28.27573853395004700 ) ) ; +#74987 = EDGE_LOOP ( 'NONE', ( #55458, #17220, #54701 ) ) ; +#74988 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74989 = ORIENTED_EDGE ( 'NONE', *, *, #22759, .F. ) ; +#74990 = CONICAL_SURFACE ( 'NONE', #46403, 10.50000000000009600, 0.7853981633974500600 ) ; +#74991 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 51.46283204837339300, -28.48697406221667400 ) ) ; +#74992 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 16.83333333333333600, 1.741883078712340300 ) ) ; +#74993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#74994 = ORIENTED_EDGE ( 'NONE', *, *, #74665, .F. ) ; +#74995 = EDGE_LOOP ( 'NONE', ( #26005, #78905, #11488, #5188, #77622 ) ) ; +#74996 = VERTEX_POINT ( 'NONE', #41804 ) ; +#74997 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#74998 = ORIENTED_EDGE ( 'NONE', *, *, #18420, .T. ) ; +#74999 = ORIENTED_EDGE ( 'NONE', *, *, #22174, .T. ) ; +#75000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75001 = CARTESIAN_POINT ( 'NONE', ( -10.35713406050760600, 21.02620220503713400, -28.70555803802994200 ) ) ; +#75002 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#75003 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71913, #15608, #46844, #78160 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690784078700E-007, 0.0007331055842534731400 ), + .UNSPECIFIED. ) ; +#75004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75005 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 58.16545993132821500, -28.70555803802999500 ) ) ; +#75006 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#75007 = CIRCLE ( 'NONE', #29203, 10.00000000000009600 ) ; +#75009 = EDGE_CURVE ( 'NONE', #11954, #3408, #10464, .T. ) ; +#75008 = ORIENTED_EDGE ( 'NONE', *, *, #39644, .F. ) ; +#75010 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#75011 = ORIENTED_EDGE ( 'NONE', *, *, #8366, .F. ) ; +#75012 = ORIENTED_EDGE ( 'NONE', *, *, #78490, .T. ) ; +#75013 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499856300, 51.76337688193822800, -28.37223523914899900 ) ) ; +#75014 = EDGE_CURVE ( 'NONE', #20976, #24479, #76754, .T. ) ; +#75015 = VERTEX_POINT ( 'NONE', #66853 ) ; +#75016 = ORIENTED_EDGE ( 'NONE', *, *, #28131, .T. ) ; +#75017 = CARTESIAN_POINT ( 'NONE', ( -11.74534273518455900, 20.50380841767821500, -28.64142799534455000 ) ) ; +#75018 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75019 = CARTESIAN_POINT ( 'NONE', ( 11.31977005189933600, 20.97636006919908200, -28.38670679782165300 ) ) ; +#75020 = CARTESIAN_POINT ( 'NONE', ( -11.62648356805948200, 92.66042437177418400, -28.66312194083703300 ) ) ; +#75021 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#75022 = FACE_OUTER_BOUND ( 'NONE', #70522, .T. ) ; +#75023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75024 = ORIENTED_EDGE ( 'NONE', *, *, #20831, .F. ) ; +#75025 = CARTESIAN_POINT ( 'NONE', ( 9.279233496941888100, 70.09951448976229900, -28.63282631410063700 ) ) ; +#75026 = EDGE_CURVE ( 'NONE', #25124, #62433, #8466, .T. ) ; +#75027 = ADVANCED_FACE ( 'NONE', ( #48360 ), #29940, .T. ) ; +#75028 = EDGE_LOOP ( 'NONE', ( #15213, #66444, #59569 ) ) ; +#75030 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, 9.999999999999998200, -28.70555803803001300 ) ) ; +#75029 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 80.79999999999999700, -28.55171188418376700 ) ) ; +#75031 = EDGE_CURVE ( 'NONE', #31068, #34438, #46382, .T. ) ; +#75032 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#75033 = AXIS2_PLACEMENT_3D ( 'NONE', #78176, #40908, #3624 ) ; +#75034 = CARTESIAN_POINT ( 'NONE', ( 10.48827640582224800, 9.414546627889173200, -28.68840631370114000 ) ) ; +#75035 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 20.33333333333334300, 2.794441961969998300 ) ) ; +#75036 = VECTOR ( 'NONE', #13643, 1000.000000000000000 ) ; +#75037 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.79999999999982700, -28.20555803803014400 ) ) ; +#75038 = ORIENTED_EDGE ( 'NONE', *, *, #67742, .T. ) ; +#75039 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48468, #42225, #79798, #42505 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629355108766200E-007, 0.0007670609591625356000 ), + .UNSPECIFIED. ) ; +#75040 = CARTESIAN_POINT ( 'NONE', ( 3.064555739225051300, 80.09037803491475000, -28.29483400905895300 ) ) ; +#75041 = ADVANCED_FACE ( 'NONE', ( #15294 ), #13364, .T. ) ; +#75042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75043 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75044 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609666200, 71.46283204837337200, -28.48697406221659600 ) ) ; +#75045 = EDGE_CURVE ( 'NONE', #13047, #2702, #70772, .T. ) ; +#75046 = EDGE_CURVE ( 'NONE', #56790, #48103, #62331, .T. ) ; +#75047 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#75048 = EDGE_CURVE ( 'NONE', #11350, #49658, #47827, .T. ) ; +#75049 = AXIS2_PLACEMENT_3D ( 'NONE', #13967, #20218, #51161 ) ; +#75050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75051 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990600, 50.79999999999999000, -28.70555803802997700 ) ) ; +#75052 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252837800, 9.968680884981202100, -28.51286550264501000 ) ) ; +#75053 = AXIS2_PLACEMENT_3D ( 'NONE', #58584, #64878, #52295 ) ; +#75054 = ADVANCED_FACE ( 'NONE', ( #686 ), #11412, .T. ) ; +#75055 = ORIENTED_EDGE ( 'NONE', *, *, #59056, .T. ) ; +#75056 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576920400, 24.54999999999999700, -28.65220501466659200 ) ) ; +#75057 = ORIENTED_EDGE ( 'NONE', *, *, #19129, .F. ) ; +#75058 = AXIS2_PLACEMENT_3D ( 'NONE', #36779, #80319, #43029 ) ; +#75059 = ORIENTED_EDGE ( 'NONE', *, *, #71195, .T. ) ; +#75060 = CARTESIAN_POINT ( 'NONE', ( 2.438174915909131700, 30.98385710212512500, -28.57719681746177500 ) ) ; +#75061 = EDGE_CURVE ( 'NONE', #80595, #25412, #33390, .T. ) ; +#75062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75063 = AXIS2_PLACEMENT_3D ( 'NONE', #30088, #54788, #79826 ) ; +#75064 = AXIS2_PLACEMENT_3D ( 'NONE', #55506, #74298, #36996 ) ; +#75065 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528152600, 20.46868088498121800, -28.51286550264509900 ) ) ; +#75066 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#75067 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 67.94142842854307700, -28.20555803802997700 ) ) ; +#75068 = ADVANCED_FACE ( 'NONE', ( #61054 ), #59071, .T. ) ; +#75069 = CIRCLE ( 'NONE', #36185, 10.00000000000009200 ) ; +#75070 = EDGE_LOOP ( 'NONE', ( #53052, #8091, #24611 ) ) ; +#75071 = ORIENTED_EDGE ( 'NONE', *, *, #4945, .T. ) ; +#75072 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 61.08083798124323500, -28.45106778992441600 ) ) ; +#75073 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143100, 28.57141756547892100, -28.70555803802994200 ) ) ; +#75074 = CONICAL_SURFACE ( 'NONE', #17747, 10.00000000000009400, 0.7853981633974447300 ) ; +#75075 = ORIENTED_EDGE ( 'NONE', *, *, #31801, .T. ) ; +#75076 = VERTEX_POINT ( 'NONE', #725 ) ; +#75077 = ORIENTED_EDGE ( 'NONE', *, *, #55683, .F. ) ; +#75078 = ORIENTED_EDGE ( 'NONE', *, *, #64461, .F. ) ; +#75079 = ADVANCED_FACE ( 'NONE', ( #79536 ), #26016, .F. ) ; +#75080 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 64.00000000000000000, 3.794441961969998300 ) ) ; +#75081 = CONICAL_SURFACE ( 'NONE', #60438, 10.50000000000009600, 0.7853981633974500600 ) ; +#75082 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#75083 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47987, #35545, #74185, #36864 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569918020500E-007, 0.0004669842289003324900 ), + .UNSPECIFIED. ) ; +#75084 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#75085 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 29.00000000000001100, 6.794441961969995200 ) ) ; +#75086 = ORIENTED_EDGE ( 'NONE', *, *, #20711, .F. ) ; +#75087 = CIRCLE ( 'NONE', #68708, 9.500000000000099500 ) ; +#75088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75089 = ORIENTED_EDGE ( 'NONE', *, *, #8599, .F. ) ; +#75090 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#75091 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707777600, 41.66410593583297100, -28.68054222049973800 ) ) ; +#75092 = ORIENTED_EDGE ( 'NONE', *, *, #48411, .F. ) ; +#75093 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 66.33333333333334300, -10.73183747965883100 ) ) ; +#75094 = EDGE_LOOP ( 'NONE', ( #74390, #51632, #12191, #6995, #14106 ) ) ; +#75095 = ORIENTED_EDGE ( 'NONE', *, *, #77559, .F. ) ; +#75096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75097 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188001000, 39.53085164125334900, -28.45573375118225800 ) ) ; +#75098 = CONICAL_SURFACE ( 'NONE', #16469, 10.50000000000009600, 0.7853981633974500600 ) ; +#75099 = AXIS2_PLACEMENT_3D ( 'NONE', #36834, #80370, #43090 ) ; +#75100 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 61.08083798124323500, -28.45106778992441600 ) ) ; +#75101 = CARTESIAN_POINT ( 'NONE', ( -3.308113725416075300, 41.01125751638927900, -28.53740755999536900 ) ) ; +#75102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75103 = EDGE_CURVE ( 'NONE', #45918, #30155, #18922, .T. ) ; +#75104 = VERTEX_POINT ( 'NONE', #13272 ) ; +#75105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75106 = CARTESIAN_POINT ( 'NONE', ( 15.85347128805683600, 47.18572799237470200, -28.67630847257083500 ) ) ; +#75107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75108 = CONICAL_SURFACE ( 'NONE', #79517, 10.00000000000009600, 0.7853981633974447300 ) ; +#75109 = VERTEX_POINT ( 'NONE', #32025 ) ; +#75110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75111 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#75112 = CARTESIAN_POINT ( 'NONE', ( -0.7142857142857167400, 22.67681279774499400, -28.70555803802995200 ) ) ; +#75113 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919945400, 18.37705528805141600, -28.20555803802992800 ) ) ; +#75114 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 89.97246552159111800, -28.38801640354855100 ) ) ; +#75115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75116 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489639300, 39.15930907398619400, -28.35186440610857500 ) ) ; +#75117 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747185100, 20.46868088498122200, -28.51286550264510200 ) ) ; +#75118 = PLANE ( 'NONE', #58508 ) ; +#75119 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285709100, 83.67681279774501500, -28.70555803802997700 ) ) ; +#75120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75121 = EDGE_CURVE ( 'NONE', #48972, #44982, #4463, .T. ) ; +#75122 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75123 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75124 = EDGE_CURVE ( 'NONE', #20286, #6807, #44433, .T. ) ; +#75125 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#75126 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .T. ) ; +#75127 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820187800, 61.51741414369118400, -28.27509349209130500 ) ) ; +#75128 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34947, #72216, #78468, #41172 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690611605900E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#75129 = ORIENTED_EDGE ( 'NONE', *, *, #31408, .T. ) ; +#75130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75131 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#75132 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 28.63131911501876600, -28.51286550264508100 ) ) ; +#75133 = EDGE_CURVE ( 'NONE', #16929, #15453, #75605, .T. ) ; +#75134 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75135 = EDGE_CURVE ( 'NONE', #59799, #31243, #70775, .T. ) ; +#75136 = CONICAL_SURFACE ( 'NONE', #25727, 10.50000000000009600, 0.7853981633974500600 ) ; +#75137 = ORIENTED_EDGE ( 'NONE', *, *, #18231, .F. ) ; +#75138 = AXIS2_PLACEMENT_3D ( 'NONE', #29359, #72844, #35581 ) ; +#75139 = ORIENTED_EDGE ( 'NONE', *, *, #75103, .F. ) ; +#75140 = EDGE_CURVE ( 'NONE', #80699, #52219, #27974, .T. ) ; +#75141 = ADVANCED_FACE ( 'NONE', ( #42513 ), #24049, .F. ) ; +#75142 = ORIENTED_EDGE ( 'NONE', *, *, #31545, .F. ) ; +#75143 = CONICAL_SURFACE ( 'NONE', #14050, 10.00000000000009200, 0.7853981633974447300 ) ; +#75144 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877852800, 18.57332680091207400, -28.37233769390152800 ) ) ; +#75145 = ORIENTED_EDGE ( 'NONE', *, *, #653, .F. ) ; +#75146 = ORIENTED_EDGE ( 'NONE', *, *, #76441, .F. ) ; +#75147 = EDGE_LOOP ( 'NONE', ( #22782, #58702, #47506, #35924 ) ) ; +#75148 = ADVANCED_FACE ( 'NONE', ( #62997 ), #38770, .T. ) ; +#75149 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 35.00000000000000700, -1.205558038030005300 ) ) ; +#75150 = AXIS2_PLACEMENT_3D ( 'NONE', #2189, #33219, #39461 ) ; +#75151 = CIRCLE ( 'NONE', #77563, 9.500000000000095900 ) ; +#75152 = EDGE_CURVE ( 'NONE', #53532, #9002, #56302, .T. ) ; +#75153 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#75154 = EDGE_CURVE ( 'NONE', #36904, #9178, #41857, .T. ) ; +#75155 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 30.74660241562181500, -28.20555803802995200 ) ) ; +#75156 = EDGE_CURVE ( 'NONE', #35884, #73569, #73692, .T. ) ; +#75157 = ADVANCED_FACE ( 'NONE', ( #40565 ), #38589, .T. ) ; +#75158 = VERTEX_POINT ( 'NONE', #76593 ) ; +#75159 = VERTEX_POINT ( 'NONE', #39322 ) ; +#75160 = CIRCLE ( 'NONE', #56666, 9.500000000000099500 ) ; +#75161 = AXIS2_PLACEMENT_3D ( 'NONE', #3451, #9730, #40727 ) ; +#75162 = VERTEX_POINT ( 'NONE', #2051 ) ; +#75163 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146301500, 71.25732391202359400, -28.20555803803030800 ) ) ; +#75164 = ORIENTED_EDGE ( 'NONE', *, *, #14842, .T. ) ; +#75165 = ORIENTED_EDGE ( 'NONE', *, *, #12615, .F. ) ; +#75166 = ORIENTED_EDGE ( 'NONE', *, *, #34413, .T. ) ; +#75167 = CIRCLE ( 'NONE', #26280, 10.50000000000009600 ) ; +#75168 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511866900, 79.60439022488334600, -28.70555803802997700 ) ) ; +#75169 = ORIENTED_EDGE ( 'NONE', *, *, #20475, .T. ) ; +#75170 = EDGE_CURVE ( 'NONE', #75162, #19455, #27437, .T. ) ; +#75171 = CIRCLE ( 'NONE', #46091, 9.499999999999964500 ) ; +#75172 = AXIS2_PLACEMENT_3D ( 'NONE', #38328, #1086, #44547 ) ; +#75173 = AXIS2_PLACEMENT_3D ( 'NONE', #58066, #20812, #64370 ) ; +#75174 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#75175 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 30.73796787468680600, -28.38801640354855100 ) ) ; +#75176 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528039996500, 15.94142842854277800, -28.37229765499287700 ) ) ; +#75177 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 6.333333333333346400, -6.705558038030005700 ) ) ; +#75178 = ORIENTED_EDGE ( 'NONE', *, *, #15681, .T. ) ; +#75179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75180 = FACE_OUTER_BOUND ( 'NONE', #1868, .T. ) ; +#75181 = ORIENTED_EDGE ( 'NONE', *, *, #39625, .T. ) ; +#75182 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57243, #1469, #20255, #63790 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368047486929600E-007, 0.0003301033223275558100 ), + .UNSPECIFIED. ) ; +#75183 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75185 = CARTESIAN_POINT ( 'NONE', ( 16.98802009436520400, 6.023309579818995700, -27.88169631804967000 ) ) ; +#75186 = CARTESIAN_POINT ( 'NONE', ( 10.43170730348813700, 79.60439022488340300, -28.70555803802997700 ) ) ; +#75187 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36513, #48995, #67813, #30571 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697630884800E-007, 0.0008724363063899960400 ), + .UNSPECIFIED. ) ; +#75188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75189 = CARTESIAN_POINT ( 'NONE', ( -2.881064473891025400, 90.49763722318495200, -28.32100408376068800 ) ) ; +#75190 = CARTESIAN_POINT ( 'NONE', ( -11.09526249034404400, 17.92298334620739200, -28.20555803802993500 ) ) ; +#75191 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80545, #7111, #63175, #25911 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983711874995400E-007, 0.001076779618375888200 ), + .UNSPECIFIED. ) ; +#75192 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285890300, 87.92318720225479500, -28.70555803803030800 ) ) ; +#75193 = AXIS2_PLACEMENT_3D ( 'NONE', #50213, #13008, #56494 ) ; +#75194 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 40.83333333333334300, 3.794441961969996900 ) ) ; +#75195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75196 = EDGE_CURVE ( 'NONE', #74407, #45307, #9424, .T. ) ; +#75197 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#75198 = ORIENTED_EDGE ( 'NONE', *, *, #3383, .T. ) ; +#75199 = AXIS2_PLACEMENT_3D ( 'NONE', #21567, #65089, #27833 ) ; +#75200 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75201 = EDGE_LOOP ( 'NONE', ( #9995, #69052, #10035 ) ) ; +#75202 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#75203 = CARTESIAN_POINT ( 'NONE', ( 24.61277623056487600, 96.40638811528127400, -21.51959371688695200 ) ) ; +#75204 = CARTESIAN_POINT ( 'NONE', ( 4.469863111190076000, 9.146957350529831400, -28.66910751791844100 ) ) ; +#75205 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309600, 81.43650294695081000, -28.30782889147504700 ) ) ; +#75206 = CARTESIAN_POINT ( 'NONE', ( 17.04393630873285700, 89.89196326503810000, -28.29033182162403300 ) ) ; +#75207 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45007, #1781, #20581, #64123 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 5.204170427930421300E-018, 0.001679852151197427300 ), + .UNSPECIFIED. ) ; +#75208 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#75209 = ORIENTED_EDGE ( 'NONE', *, *, #31784, .T. ) ; +#75210 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75211 = CONICAL_SURFACE ( 'NONE', #73608, 10.50000000000009600, 0.7853981633974500600 ) ; +#75212 = CARTESIAN_POINT ( 'NONE', ( 3.839550451719104400, 81.13768531620301900, -28.37082013777836300 ) ) ; +#75213 = VERTEX_POINT ( 'NONE', #51809 ) ; +#75214 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75215 = CONICAL_SURFACE ( 'NONE', #60780, 10.00000000000009400, 0.7853981633974447300 ) ; +#75216 = ORIENTED_EDGE ( 'NONE', *, *, #58942, .F. ) ; +#75217 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.86203212531317100, -28.38801640354855500 ) ) ; +#75218 = CONICAL_SURFACE ( 'NONE', #35094, 10.50000000000009600, 0.7853981633974500600 ) ; +#75219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75221 = ORIENTED_EDGE ( 'NONE', *, *, #11918, .T. ) ; +#75220 = CARTESIAN_POINT ( 'NONE', ( 4.656953934540331000, 72.51973550835654700, -28.70555803803005900 ) ) ; +#75222 = EDGE_LOOP ( 'NONE', ( #23335, #47880, #15248 ) ) ; +#75223 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75225 = ORIENTED_EDGE ( 'NONE', *, *, #27723, .F. ) ; +#75226 = CARTESIAN_POINT ( 'NONE', ( -2.343046065459565500, 62.51973550835663900, -28.70555803803005200 ) ) ; +#75227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75228 = FACE_OUTER_BOUND ( 'NONE', #44603, .T. ) ; +#75229 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801596400, 60.90033558196090300, -28.70555803803014400 ) ) ; +#75230 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62832, #31555, #6785, #25572 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569564862300E-007, 0.0007596410370203545800 ), + .UNSPECIFIED. ) ; +#75231 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#75232 = ADVANCED_FACE ( 'NONE', ( #71740 ), #69765, .F. ) ; +#75233 = ORIENTED_EDGE ( 'NONE', *, *, #30110, .T. ) ; +#75234 = FACE_OUTER_BOUND ( 'NONE', #45859, .T. ) ; +#75235 = EDGE_CURVE ( 'NONE', #9060, #45282, #12964, .T. ) ; +#75236 = VERTEX_POINT ( 'NONE', #45824 ) ; +#75237 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 47.16666666666667900, -12.20555803803000000 ) ) ; +#75239 = EDGE_CURVE ( 'NONE', #29714, #4729, #79269, .T. ) ; +#75238 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .T. ) ; +#75240 = EDGE_LOOP ( 'NONE', ( #44371, #42029, #34057, #21067, #19417, #59625 ) ) ; +#75241 = CARTESIAN_POINT ( 'NONE', ( -16.95509637656713800, 18.35339758437810100, -28.20555803802992800 ) ) ; +#75242 = CONICAL_SURFACE ( 'NONE', #69949, 10.50000000000009600, 0.7853981633974518300 ) ; +#75243 = ORIENTED_EDGE ( 'NONE', *, *, #65034, .T. ) ; +#75244 = ADVANCED_FACE ( 'NONE', ( #57132 ), #36672, .F. ) ; +#75245 = FACE_OUTER_BOUND ( 'NONE', #74541, .T. ) ; +#75246 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 12.33333333333335500, 3.124568980892187500 ) ) ; +#75247 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714268700, 12.17681279774500200, -28.70555803802994200 ) ) ; +#75248 = EDGE_CURVE ( 'NONE', #31791, #27795, #64832, .T. ) ; +#75249 = CARTESIAN_POINT ( 'NONE', ( -4.547741220074368800, 38.31967837323414000, -28.55467576046956800 ) ) ; +#75250 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999300, 28.47246552159108600, -28.38801640354855800 ) ) ; +#75251 = ORIENTED_EDGE ( 'NONE', *, *, #68910, .T. ) ; +#75252 = ORIENTED_EDGE ( 'NONE', *, *, #49330, .T. ) ; +#75253 = EDGE_CURVE ( 'NONE', #40106, #64449, #50296, .T. ) ; +#75254 = EDGE_CURVE ( 'NONE', #54223, #22718, #35881, .T. ) ; +#75255 = ORIENTED_EDGE ( 'NONE', *, *, #4698, .F. ) ; +#75256 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524700, 90.16054007504463600, -28.34042301926880800 ) ) ; +#75257 = FACE_OUTER_BOUND ( 'NONE', #72053, .T. ) ; +#75258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75259 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 14.66666666666668000, -6.705558038030000400 ) ) ; +#75260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75261 = AXIS2_PLACEMENT_3D ( 'NONE', #67958, #30711, #74242 ) ; +#75262 = EDGE_CURVE ( 'NONE', #77362, #44262, #53211, .T. ) ; +#75263 = EDGE_CURVE ( 'NONE', #47717, #64266, #21441, .T. ) ; +#75264 = CARTESIAN_POINT ( 'NONE', ( -4.344797651230950700, 29.28860447109613200, -28.53900456328625500 ) ) ; +#75265 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#75266 = EDGE_CURVE ( 'NONE', #31311, #40962, #6949, .T. ) ; +#75267 = CARTESIAN_POINT ( 'NONE', ( 6.567215906801286800E-015, 36.70389005397394300, -28.37519436813181200 ) ) ; +#75268 = ADVANCED_FACE ( 'NONE', ( #77576 ), #67829, .T. ) ; +#75269 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 63.42856308690586800, -28.36981695106784000 ) ) ; +#75270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75271 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999984100, -28.20555803803014400 ) ) ; +#75272 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#75273 = AXIS2_PLACEMENT_3D ( 'NONE', #12718, #56202, #18945 ) ; +#75274 = CARTESIAN_POINT ( 'NONE', ( 16.05950772022747200, 93.71907156246585700, -28.48071248858398300 ) ) ; +#75275 = CIRCLE ( 'NONE', #60235, 10.50000000000009600 ) ; +#75276 = PLANE ( 'NONE', #27574 ) ; +#75277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75278 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305484800, 31.39604671418359800, -28.70555803803002000 ) ) ; +#75279 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.65857157145701000, -28.20555803802997700 ) ) ; +#75280 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000135900, 67.22261628933253500, -28.70555803803030800 ) ) ; +#75281 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#75283 = ORIENTED_EDGE ( 'NONE', *, *, #63814, .T. ) ; +#75282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75284 = AXIS2_PLACEMENT_3D ( 'NONE', #51423, #57716, #7935 ) ; +#75285 = AXIS2_PLACEMENT_3D ( 'NONE', #28454, #65689, #3366 ) ; +#75286 = ORIENTED_EDGE ( 'NONE', *, *, #77546, .T. ) ; +#75287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75289 = CARTESIAN_POINT ( 'NONE', ( 2.794151403462644900, 51.39409401757614400, -28.39369363572344100 ) ) ; +#75288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67396, #23901, #79919, #42623 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766081983421000E-007, 0.001119323292485699900 ), + .UNSPECIFIED. ) ; +#75291 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000063900, 83.65857157145693200, -28.20555803802997700 ) ) ; +#75292 = CONICAL_SURFACE ( 'NONE', #65760, 10.50000000000009600, 0.7853981633974500600 ) ; +#75293 = EDGE_LOOP ( 'NONE', ( #29522, #35199, #64806 ) ) ; +#75294 = CONICAL_SURFACE ( 'NONE', #32054, 10.00000000000009400, 0.7853981633974447300 ) ; +#75295 = ORIENTED_EDGE ( 'NONE', *, *, #49473, .T. ) ; +#75296 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 18.16666666666668900, -3.349151577478988200 ) ) ; +#75297 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183700, 28.63131911501876900, -28.51286550264508100 ) ) ; +#75298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75299 = FACE_OUTER_BOUND ( 'NONE', #64649, .T. ) ; +#75300 = VERTEX_POINT ( 'NONE', #53176 ) ; +#75301 = ORIENTED_EDGE ( 'NONE', *, *, #47825, .T. ) ; +#75302 = EDGE_LOOP ( 'NONE', ( #55595, #68988, #29656, #5572, #34669, #68540, #53870, #57887 ) ) ; +#75303 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 31.12753447840886900, -28.38801640354855500 ) ) ; +#75304 = AXIS2_PLACEMENT_3D ( 'NONE', #68212, #18451, #18179 ) ; +#75305 = EDGE_CURVE ( 'NONE', #55672, #27170, #73292, .T. ) ; +#75306 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#75307 = CARTESIAN_POINT ( 'NONE', ( -17.59743545783878800, 39.16749699759768800, -28.23966044827353300 ) ) ; +#75308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1908, #51661, #70455, #33206 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002386166704004031200 ), + .UNSPECIFIED. ) ; +#75309 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75310 = CIRCLE ( 'NONE', #21685, 9.500000000000097700 ) ; +#75311 = ORIENTED_EDGE ( 'NONE', *, *, #8373, .F. ) ; +#75312 = CARTESIAN_POINT ( 'NONE', ( 17.30183166260292500, 89.84162552338051500, -28.43755849160218900 ) ) ; +#75313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75314 = CIRCLE ( 'NONE', #32609, 10.50000000000009600 ) ; +#75315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75316 = ORIENTED_EDGE ( 'NONE', *, *, #27280, .F. ) ; +#75317 = EDGE_CURVE ( 'NONE', #48835, #1054, #58797, .T. ) ; +#75319 = ORIENTED_EDGE ( 'NONE', *, *, #12103, .T. ) ; +#75318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74512, #80757, #18748, #62268 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392283046800E-007, 0.0003301092607755759700 ), + .UNSPECIFIED. ) ; +#75320 = AXIS2_PLACEMENT_3D ( 'NONE', #54815, #48812, #11600 ) ; +#75321 = VERTEX_POINT ( 'NONE', #46905 ) ; +#75322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75323 = ORIENTED_EDGE ( 'NONE', *, *, #60386, .F. ) ; +#75324 = CIRCLE ( 'NONE', #63784, 10.00000000000009200 ) ; +#75325 = CARTESIAN_POINT ( 'NONE', ( 11.76690734368979100, 55.80000000000027400, -28.70555803803047500 ) ) ; +#75326 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39409, #33168, #26665, #2132 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104962561800, 0.0007670610367937987800 ), + .UNSPECIFIED. ) ; +#75327 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000008900, 26.44142842854307300, -28.20555803802994200 ) ) ; +#75328 = ADVANCED_FACE ( 'NONE', ( #3567 ), #34747, .F. ) ; +#75329 = EDGE_LOOP ( 'NONE', ( #25470, #30060, #25165, #28677 ) ) ; +#75330 = ORIENTED_EDGE ( 'NONE', *, *, #53340, .T. ) ; +#75331 = AXIS2_PLACEMENT_3D ( 'NONE', #35791, #79318, #42021 ) ; +#75332 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 81.08083798124324900, -28.45106778992441600 ) ) ; +#75333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75334 = VERTEX_POINT ( 'NONE', #16209 ) ; +#75335 = CONICAL_SURFACE ( 'NONE', #25253, 10.50000000000009600, 0.7853981633974500600 ) ; +#75336 = CARTESIAN_POINT ( 'NONE', ( -6.418476861114186200E-014, 22.65857157145693900, -28.20555803802995200 ) ) ; +#75337 = ADVANCED_FACE ( 'NONE', ( #5541 ), #1615, .T. ) ; +#75338 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 61.83333333333334300, -6.205558038030004800 ) ) ; +#75339 = AXIS2_PLACEMENT_3D ( 'NONE', #56205, #62218, #68724 ) ; +#75340 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.20555803802997700 ) ) ; +#75341 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 26.83333333333335300, -9.205558038030003900 ) ) ; +#75342 = CARTESIAN_POINT ( 'NONE', ( 2.466255859631175900, 91.59999999999999400, -28.70555803802999500 ) ) ; +#75343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75344 = EDGE_CURVE ( 'NONE', #4729, #4270, #18187, .T. ) ; +#75345 = CIRCLE ( 'NONE', #13293, 9.500000000000099500 ) ; +#75346 = ADVANCED_FACE ( 'NONE', ( #22096 ), #32769, .F. ) ; +#75347 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451034900, 49.65930907398620800, -28.35186440610858900 ) ) ; +#75348 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656745000, 18.35339758437769200, -28.20555803803025800 ) ) ; +#75349 = ADVANCED_FACE ( 'NONE', ( #55165 ), #80477, .F. ) ; +#75350 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 64.16666666666667100, 9.794441961969994300 ) ) ; +#75351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75352 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#75353 = EDGE_LOOP ( 'NONE', ( #73723, #18935, #40270 ) ) ; +#75354 = EDGE_LOOP ( 'NONE', ( #70688, #8775, #51604, #24369 ) ) ; +#75355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75356 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38085, #44311, #19621, #63153 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565736097056400E-007, 0.0006649316450229786100 ), + .UNSPECIFIED. ) ; +#75357 = EDGE_LOOP ( 'NONE', ( #34860, #21839, #14716 ) ) ; +#75358 = ADVANCED_FACE ( 'NONE', ( #49286 ), #47331, .T. ) ; +#75359 = CARTESIAN_POINT ( 'NONE', ( -9.279102202939517600, 51.50050326225952100, -28.63287226700114000 ) ) ; +#75360 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655983500, 17.92298334620702600, -28.20555803803002000 ) ) ; +#75361 = CONICAL_SURFACE ( 'NONE', #70369, 10.50000000000009600, 0.7853981633974518300 ) ; +#75362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75363 = ORIENTED_EDGE ( 'NONE', *, *, #13367, .T. ) ; +#75364 = FACE_OUTER_BOUND ( 'NONE', #38921, .T. ) ; +#75365 = EDGE_CURVE ( 'NONE', #66366, #37986, #44298, .T. ) ; +#75366 = VERTEX_POINT ( 'NONE', #35260 ) ; +#75367 = EDGE_CURVE ( 'NONE', #36405, #34172, #29945, .T. ) ; +#75368 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 20.78933626866496100, -28.53923937255169500 ) ) ; +#75369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75370 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75371 = ORIENTED_EDGE ( 'NONE', *, *, #63505, .T. ) ; +#75372 = CONICAL_SURFACE ( 'NONE', #50021, 10.50000000000009600, 0.7853981633974500600 ) ; +#75373 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 30.74660241562181500, -28.20555803802995200 ) ) ; +#75374 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75375 = CONICAL_SURFACE ( 'NONE', #78399, 10.00000000000009400, 0.7853981633974447300 ) ; +#75376 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571473200, 51.52858243452088500, -28.70555803803014400 ) ) ; +#75377 = VERTEX_POINT ( 'NONE', #60274 ) ; +#75378 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#75379 = ORIENTED_EDGE ( 'NONE', *, *, #10301, .F. ) ; +#75380 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#75381 = ORIENTED_EDGE ( 'NONE', *, *, #6820, .T. ) ; +#75382 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#75383 = AXIS2_PLACEMENT_3D ( 'NONE', #58754, #21519, #65040 ) ; +#75384 = EDGE_CURVE ( 'NONE', #58595, #73720, #63942, .T. ) ; +#75385 = CARTESIAN_POINT ( 'NONE', ( 3.330398220515429700, 70.58127875436079500, -28.53757464917570300 ) ) ; +#75386 = EDGE_CURVE ( 'NONE', #62020, #37269, #20143, .T. ) ; +#75387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75388 = FACE_OUTER_BOUND ( 'NONE', #12231, .T. ) ; +#75389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75390 = EDGE_CURVE ( 'NONE', #65478, #73924, #15433, .T. ) ; +#75391 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547400, 70.16054007504448000, -28.34042301926906000 ) ) ; +#75392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75393 = ORIENTED_EDGE ( 'NONE', *, *, #35121, .T. ) ; +#75394 = AXIS2_PLACEMENT_3D ( 'NONE', #58035, #20784, #64324 ) ; +#75395 = FACE_OUTER_BOUND ( 'NONE', #40551, .T. ) ; +#75396 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 67.66666666666668600, -5.205558038030003100 ) ) ; +#75397 = ORIENTED_EDGE ( 'NONE', *, *, #56932, .F. ) ; +#75398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75399 = VERTEX_POINT ( 'NONE', #11026 ) ; +#75400 = ORIENTED_EDGE ( 'NONE', *, *, #7936, .T. ) ; +#75401 = CARTESIAN_POINT ( 'NONE', ( -15.68514033016293600, 14.05000000000000800, -28.35375031073495200 ) ) ; +#75402 = ORIENTED_EDGE ( 'NONE', *, *, #24403, .F. ) ; +#75403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75404 = ORIENTED_EDGE ( 'NONE', *, *, #37441, .T. ) ; +#75405 = CONICAL_SURFACE ( 'NONE', #1671, 10.00000000000009600, 0.7853981633974482800 ) ; +#75406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75407 = AXIS2_PLACEMENT_3D ( 'NONE', #17204, #41937, #60729 ) ; +#75408 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#75409 = AXIS2_PLACEMENT_3D ( 'NONE', #44434, #32249, #13237 ) ; +#75410 = CARTESIAN_POINT ( 'NONE', ( 16.73584074218867500, 9.425639482006397800, -28.45080305021061300 ) ) ; +#75411 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16800, #23056, #79090, #41788 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795529600 ), + .UNSPECIFIED. ) ; +#75412 = CARTESIAN_POINT ( 'NONE', ( 9.621978672528145500, 30.96868088498121800, -28.51286550264512000 ) ) ; +#75413 = EDGE_LOOP ( 'NONE', ( #54431, #52393, #23402, #18237, #70305, #39776 ) ) ; +#75414 = ORIENTED_EDGE ( 'NONE', *, *, #19159, .T. ) ; +#75415 = EDGE_LOOP ( 'NONE', ( #2613, #60266, #64407, #54466 ) ) ; +#75416 = CIRCLE ( 'NONE', #11684, 10.00000000000009200 ) ; +#75417 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 60.34510448120795400, -28.37193179497697300 ) ) ; +#75418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52688, #9157, #71476, #34219 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.588153195758592000E-007, 0.0003300514678516637600 ), + .UNSPECIFIED. ) ; +#75419 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 32.83333333333335000, 0.9380355014189731800 ) ) ; +#75420 = CARTESIAN_POINT ( 'NONE', ( -2.553492182972627600, 82.22511094383845900, -28.55192314908424900 ) ) ; +#75421 = AXIS2_PLACEMENT_3D ( 'NONE', #11172, #54668, #17419 ) ; +#75422 = EDGE_CURVE ( 'NONE', #70596, #61231, #65890, .T. ) ; +#75423 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957520600, 32.09027028261002100, -28.70555803802995200 ) ) ; +#75424 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123096200, 30.31139552890385100, -28.53900456328627700 ) ) ; +#75425 = ADVANCED_FACE ( 'NONE', ( #51223 ), #45371, .F. ) ; +#75426 = FACE_OUTER_BOUND ( 'NONE', #21513, .T. ) ; +#75427 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187867700, 69.99813478817169700, -28.24089224568490400 ) ) ; +#75428 = EDGE_CURVE ( 'NONE', #73316, #71197, #957, .T. ) ; +#75429 = AXIS2_PLACEMENT_3D ( 'NONE', #4009, #35324, #72039 ) ; +#75430 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#75431 = ORIENTED_EDGE ( 'NONE', *, *, #13689, .F. ) ; +#75432 = FACE_OUTER_BOUND ( 'NONE', #47011, .T. ) ; +#75433 = ADVANCED_FACE ( 'NONE', ( #30843 ), #17548, .T. ) ; +#75434 = ORIENTED_EDGE ( 'NONE', *, *, #35846, .F. ) ; +#75435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75436 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120808200, 18.38098890548046400, -28.33427604305567700 ) ) ; +#75437 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 4.166666666666675000, 1.741883078712356500 ) ) ; +#75438 = CIRCLE ( 'NONE', #10950, 9.500000000000095900 ) ; +#75439 = AXIS2_PLACEMENT_3D ( 'NONE', #73478, #66964, #23723 ) ; +#75440 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670949400, 48.94136558227929600, -28.48677465922833800 ) ) ; +#75441 = CONICAL_SURFACE ( 'NONE', #37153, 10.50000000000009600, 0.7853981633974500600 ) ; +#75442 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75443 = ORIENTED_EDGE ( 'NONE', *, *, #68338, .T. ) ; +#75444 = ADVANCED_FACE ( 'NONE', ( #16244 ), #36296, .T. ) ; +#75445 = CARTESIAN_POINT ( 'NONE', ( -2.785741443456179600, 71.52472935029894100, -28.39317435246124400 ) ) ; +#75446 = CIRCLE ( 'NONE', #7270, 10.00000000000009200 ) ; +#75447 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#75448 = EDGE_LOOP ( 'NONE', ( #27495, #75762, #57212, #30779 ) ) ; +#75449 = CARTESIAN_POINT ( 'NONE', ( 18.45737814638843900, 3.084708155478135700, -25.93063199914550400 ) ) ; +#75450 = ORIENTED_EDGE ( 'NONE', *, *, #9598, .F. ) ; +#75451 = AXIS2_PLACEMENT_3D ( 'NONE', #23743, #67242, #30020 ) ; +#75452 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998800, 37.39962244433176900, -28.53664883431609300 ) ) ; +#75453 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25545, #43974, #38009, #746 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003579241726978817900, 0.0008135742306949787000 ), + .UNSPECIFIED. ) ; +#75454 = CIRCLE ( 'NONE', #72329, 10.00000000000009200 ) ; +#75455 = ADVANCED_FACE ( 'NONE', ( #14290 ), #48774, .T. ) ; +#75456 = CYLINDRICAL_SURFACE ( 'NONE', #75284, 10.00000000000000000 ) ; +#75457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75458 = VERTEX_POINT ( 'NONE', #61352 ) ; +#75459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75460 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 38.66666666666667100, -5.535685056952199400 ) ) ; +#75461 = ORIENTED_EDGE ( 'NONE', *, *, #22614, .T. ) ; +#75462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75463 = CARTESIAN_POINT ( 'NONE', ( 9.219797288042469700, 42.59027028261004200, -28.70555803802997400 ) ) ; +#75464 = ORIENTED_EDGE ( 'NONE', *, *, #2314, .F. ) ; +#75465 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75466 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783863200, 18.16749699759737200, -28.23966044827378100 ) ) ; +#75467 = ORIENTED_EDGE ( 'NONE', *, *, #41638, .F. ) ; +#75468 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75469 = EDGE_LOOP ( 'NONE', ( #41118, #6169, #14483, #62123 ) ) ; +#75470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75471 = CARTESIAN_POINT ( 'NONE', ( 22.07696087712106300, 98.67696087711753700, -26.01289192403995500 ) ) ; +#75472 = ADVANCED_FACE ( 'NONE', ( #28928 ), #43449, .T. ) ; +#75473 = FACE_OUTER_BOUND ( 'NONE', #32787, .T. ) ; +#75474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75475 = ORIENTED_EDGE ( 'NONE', *, *, #35378, .T. ) ; +#75476 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#75477 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 61.08083798124323500, -28.45106778992441600 ) ) ; +#75478 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285896500, 67.92318720225480900, -28.70555803803030800 ) ) ; +#75479 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#75480 = FACE_OUTER_BOUND ( 'NONE', #23649, .T. ) ; +#75481 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#75482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75483 = VERTEX_POINT ( 'NONE', #36553 ) ; +#75484 = FACE_OUTER_BOUND ( 'NONE', #63635, .T. ) ; +#75485 = EDGE_CURVE ( 'NONE', #4799, #19665, #67297, .T. ) ; +#75486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17059, #67088, #5060, #48547 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852065100, 0.0009376791149930244000 ), + .UNSPECIFIED. ) ; +#75488 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925625900, 42.28032162676582600, -28.55467576046957800 ) ) ; +#75489 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#75490 = EDGE_CURVE ( 'NONE', #71905, #9828, #78543, .T. ) ; +#75491 = AXIS2_PLACEMENT_3D ( 'NONE', #1035, #69323, #56819 ) ; +#75492 = CONICAL_SURFACE ( 'NONE', #47989, 10.00000000000009200, 0.7853981633974447300 ) ; +#75493 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 45.00000000000000700, 9.794441961969996100 ) ) ; +#75494 = CONICAL_SURFACE ( 'NONE', #79109, 10.00000000000009400, 0.7853981633974447300 ) ; +#75495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80121, #24113, #61650, #24376 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001679852151197444000 ), + .UNSPECIFIED. ) ; +#75496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75497 = ORIENTED_EDGE ( 'NONE', *, *, #9540, .F. ) ; +#75498 = CONICAL_SURFACE ( 'NONE', #79634, 10.50000000000009600, 0.7853981633974500600 ) ; +#75499 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 10.16666666666668200, -6.205558038030004800 ) ) ; +#75500 = AXIS2_PLACEMENT_3D ( 'NONE', #5240, #5510, #24019 ) ; +#75501 = ORIENTED_EDGE ( 'NONE', *, *, #5062, .F. ) ; +#75502 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344310900, 38.92298334620755900, -28.20555803802996000 ) ) ; +#75503 = EDGE_CURVE ( 'NONE', #71511, #48736, #76549, .T. ) ; +#75504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75505 = EDGE_CURVE ( 'NONE', #35760, #15606, #60042, .T. ) ; +#75506 = AXIS2_PLACEMENT_3D ( 'NONE', #73147, #23371, #29641 ) ; +#75507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75508 = CONICAL_SURFACE ( 'NONE', #75500, 10.00000000000009200, 0.7853981633974447300 ) ; +#75509 = FACE_OUTER_BOUND ( 'NONE', #79740, .T. ) ; +#75510 = ORIENTED_EDGE ( 'NONE', *, *, #40561, .T. ) ; +#75511 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 12.50000000000001200, 6.847000845227641200 ) ) ; +#75512 = CIRCLE ( 'NONE', #16121, 10.00000000000009200 ) ; +#75513 = ORIENTED_EDGE ( 'NONE', *, *, #49612, .T. ) ; +#75514 = PLANE ( 'NONE', #24105 ) ; +#75515 = EDGE_CURVE ( 'NONE', #56951, #40503, #52806, .T. ) ; +#75516 = ORIENTED_EDGE ( 'NONE', *, *, #80168, .F. ) ; +#75517 = AXIS2_PLACEMENT_3D ( 'NONE', #77427, #40150, #2890 ) ; +#75518 = AXIS2_PLACEMENT_3D ( 'NONE', #42268, #4751, #48507 ) ; +#75519 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75520 = PLANE ( 'NONE', #2310 ) ; +#75521 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19178, #6655, #68940, #31702 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823694471102500E-007, 0.0008724363063894224900 ), + .UNSPECIFIED. ) ; +#75522 = CIRCLE ( 'NONE', #51882, 10.50000000000009600 ) ; +#75523 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543000, 39.99920551340398600, -28.70555803802995200 ) ) ; +#75524 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75526 = CIRCLE ( 'NONE', #64830, 10.50000000000009200 ) ; +#75527 = ORIENTED_EDGE ( 'NONE', *, *, #42581, .T. ) ; +#75528 = CARTESIAN_POINT ( 'NONE', ( 15.63561546792956800, 92.87123104169106100, -28.62442817842445600 ) ) ; +#75529 = ORIENTED_EDGE ( 'NONE', *, *, #8483, .T. ) ; +#75530 = ADVANCED_FACE ( 'NONE', ( #12348 ), #68106, .T. ) ; +#75531 = VERTEX_POINT ( 'NONE', #12369 ) ; +#75532 = AXIS2_PLACEMENT_3D ( 'NONE', #15848, #28411, #71895 ) ; +#75533 = CARTESIAN_POINT ( 'NONE', ( -19.71538762130071400, 0.5692151052466373200, -22.03209330240927600 ) ) ; +#75534 = ORIENTED_EDGE ( 'NONE', *, *, #47439, .F. ) ; +#75535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75536 = CARTESIAN_POINT ( 'NONE', ( 14.91754381105669000, 35.04999999999997600, -28.70555803802995200 ) ) ; +#75537 = ADVANCED_FACE ( 'NONE', ( #7473 ), #24976, .F. ) ; +#75538 = FACE_OUTER_BOUND ( 'NONE', #10716, .T. ) ; +#75539 = CONICAL_SURFACE ( 'NONE', #35843, 10.50000000000009400, 0.7853981633974500600 ) ; +#75540 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432847300, 20.24660241562189000, -28.20555803802994200 ) ) ; +#75541 = ORIENTED_EDGE ( 'NONE', *, *, #73871, .F. ) ; +#75542 = CARTESIAN_POINT ( 'NONE', ( 10.33039822051545500, 90.58127875436048300, -28.53757464917574200 ) ) ; +#75543 = ORIENTED_EDGE ( 'NONE', *, *, #45889, .F. ) ; +#75544 = ADVANCED_FACE ( 'NONE', ( #58063 ), #72679, .T. ) ; +#75545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75546 = ORIENTED_EDGE ( 'NONE', *, *, #58679, .F. ) ; +#75547 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571428600, 22.67681279774500400, -28.70555803802995200 ) ) ; +#75548 = CIRCLE ( 'NONE', #34678, 10.50000000000009600 ) ; +#75549 = AXIS2_PLACEMENT_3D ( 'NONE', #69268, #56759, #63041 ) ; +#75550 = ORIENTED_EDGE ( 'NONE', *, *, #41289, .T. ) ; +#75551 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 16.00000000000001400, -1.205558038030005300 ) ) ; +#75552 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75553 = ORIENTED_EDGE ( 'NONE', *, *, #46336, .F. ) ; +#75554 = FACE_OUTER_BOUND ( 'NONE', #18591, .T. ) ; +#75555 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841332300, 90.16349705304836000, -28.30782889147497600 ) ) ; +#75556 = CARTESIAN_POINT ( 'NONE', ( 11.00202872172428300, 30.81091476818470600, -28.25432823872344200 ) ) ; +#75557 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472979800, 49.63131911501867000, -28.51286550264550400 ) ) ; +#75558 = AXIS2_PLACEMENT_3D ( 'NONE', #39715, #45955, #76986 ) ; +#75559 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#75560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75561 = EDGE_LOOP ( 'NONE', ( #75833, #16831, #29150 ) ) ; +#75562 = EDGE_CURVE ( 'NONE', #44625, #39390, #38326, .T. ) ; +#75563 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#75564 = CARTESIAN_POINT ( 'NONE', ( -4.322472515540574100, 9.342828874293916300, -28.51468825946483000 ) ) ; +#75565 = FACE_OUTER_BOUND ( 'NONE', #32663, .T. ) ; +#75566 = EDGE_LOOP ( 'NONE', ( #19441, #27113, #54849, #32177 ) ) ; +#75567 = CIRCLE ( 'NONE', #71224, 10.00000000000009400 ) ; +#75568 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, 26.44142842854296700, -28.20555803802994200 ) ) ; +#75569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30058, #23776, #61051, #73551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723620500, 0.0008252574424211157200 ), + .UNSPECIFIED. ) ; +#75570 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75571 = ORIENTED_EDGE ( 'NONE', *, *, #46630, .F. ) ; +#75572 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#75573 = EDGE_LOOP ( 'NONE', ( #79457, #5931, #60430, #66216 ) ) ; +#75574 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#75575 = VECTOR ( 'NONE', #77698, 1000.000000000000000 ) ; +#75576 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#75578 = ORIENTED_EDGE ( 'NONE', *, *, #45741, .F. ) ; +#75577 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655644300, 41.67701665379239300, -28.20555803802997400 ) ) ; +#75579 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#75580 = FACE_OUTER_BOUND ( 'NONE', #52970, .T. ) ; +#75581 = CONICAL_SURFACE ( 'NONE', #13149, 10.00000000000009200, 0.7853981633974447300 ) ; +#75583 = EDGE_CURVE ( 'NONE', #33234, #55937, #23930, .T. ) ; +#75582 = EDGE_LOOP ( 'NONE', ( #6611, #3918, #512, #49137 ) ) ; +#75584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75585 = CARTESIAN_POINT ( 'NONE', ( -15.47405959995702000, 46.48096581827314100, -28.69431509262337700 ) ) ; +#75586 = EDGE_CURVE ( 'NONE', #51529, #53696, #9429, .T. ) ; +#75587 = CARTESIAN_POINT ( 'NONE', ( 10.03178561562192100, 81.31767869357327100, -28.25052235028445200 ) ) ; +#75588 = EDGE_LOOP ( 'NONE', ( #19325, #45258, #49675 ) ) ; +#75589 = VERTEX_POINT ( 'NONE', #37610 ) ; +#75590 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 59.66666666666667100, 3.124568980892192800 ) ) ; +#75591 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 38.91070809551056400, -28.20555803802995200 ) ) ; +#75592 = EDGE_CURVE ( 'NONE', #15774, #18937, #75750, .T. ) ; +#75593 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 24.66666666666667500, 5.722645192245505700 ) ) ; +#75594 = EDGE_CURVE ( 'NONE', #19712, #79130, #61334, .T. ) ; +#75595 = FACE_OUTER_BOUND ( 'NONE', #16020, .T. ) ; +#75596 = AXIS2_PLACEMENT_3D ( 'NONE', #45437, #39486, #64291 ) ; +#75597 = ORIENTED_EDGE ( 'NONE', *, *, #67300, .T. ) ; +#75598 = ORIENTED_EDGE ( 'NONE', *, *, #60991, .F. ) ; +#75599 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#75600 = ORIENTED_EDGE ( 'NONE', *, *, #26821, .T. ) ; +#75601 = ORIENTED_EDGE ( 'NONE', *, *, #33524, .T. ) ; +#75602 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 62.00000000000002800, -12.20555803803000200 ) ) ; +#75603 = VERTEX_POINT ( 'NONE', #68905 ) ; +#75604 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567140300, 9.746602415621863400, -28.20555803803009500 ) ) ; +#75605 = CIRCLE ( 'NONE', #47378, 10.00000000000009200 ) ; +#75606 = ORIENTED_EDGE ( 'NONE', *, *, #64345, .T. ) ; +#75607 = AXIS2_PLACEMENT_3D ( 'NONE', #35198, #78709, #41412 ) ; +#75608 = ORIENTED_EDGE ( 'NONE', *, *, #72748, .T. ) ; +#75609 = EDGE_CURVE ( 'NONE', #10918, #27305, #46808, .T. ) ; +#75610 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000001100, 8.799999999999668500, -28.20555803803025800 ) ) ; +#75611 = EDGE_CURVE ( 'NONE', #39894, #64099, #32370, .T. ) ; +#75612 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567146500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#75613 = EDGE_CURVE ( 'NONE', #19495, #71041, #26944, .T. ) ; +#75614 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69329, #25840, #1046, #44525 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904645691300E-007, 0.0006651184466334865100 ), + .UNSPECIFIED. ) ; +#75615 = CARTESIAN_POINT ( 'NONE', ( -0.4762948662743298800, 26.43535825203924700, -28.53896444442197800 ) ) ; +#75616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75617 = CONICAL_SURFACE ( 'NONE', #22633, 10.50000000000009600, 0.7853981633974500600 ) ; +#75618 = ORIENTED_EDGE ( 'NONE', *, *, #57823, .F. ) ; +#75619 = AXIS2_PLACEMENT_3D ( 'NONE', #62117, #24849, #68351 ) ; +#75620 = ORIENTED_EDGE ( 'NONE', *, *, #79595, .F. ) ; +#75621 = CARTESIAN_POINT ( 'NONE', ( -16.33099763933873700, 44.97317079140169200, -28.62115403300391800 ) ) ; +#75622 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67005, #29776, #4976, #48463 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881204113740000E-007, 0.0008724366121404036700 ), + .UNSPECIFIED. ) ; +#75624 = ORIENTED_EDGE ( 'NONE', *, *, #79549, .F. ) ; +#75625 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656722600, 49.85339758437807900, -28.20555803802996700 ) ) ; +#75626 = CIRCLE ( 'NONE', #73040, 10.00000000000009200 ) ; +#75627 = CARTESIAN_POINT ( 'NONE', ( 10.51684719650754800, 30.39456479767151000, -28.70555803802995200 ) ) ; +#75628 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910400, 76.76150692817282100, -28.68631150211663100 ) ) ; +#75629 = CARTESIAN_POINT ( 'NONE', ( 4.214258556544186800, 51.52472935029887700, -28.39317435246146500 ) ) ; +#75630 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993100, 67.70389005397365200, -28.37519436813215300 ) ) ; +#75631 = CARTESIAN_POINT ( 'NONE', ( -4.283176507099049100, 41.53732497909462000, -28.41043597897462900 ) ) ; +#75632 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59442, #15909, #65699, #28471 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386350719900, 0.0008131256040088924300 ), + .UNSPECIFIED. ) ; +#75633 = CONICAL_SURFACE ( 'NONE', #2156, 10.50000000000009600, 0.7853981633974500600 ) ; +#75634 = EDGE_CURVE ( 'NONE', #40890, #359, #17920, .T. ) ; +#75635 = ADVANCED_FACE ( 'NONE', ( #61991 ), #886, .T. ) ; +#75636 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719598700, 47.44142842854297000, -28.37229765499278500 ) ) ; +#75637 = AXIS2_PLACEMENT_3D ( 'NONE', #49921, #176, #6179 ) ; +#75638 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034431100, 20.67701665379226500, -28.20555803802994200 ) ) ; +#75639 = AXIS2_PLACEMENT_3D ( 'NONE', #47718, #10495, #53991 ) ; +#75640 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819206200, 59.94924284854685900, -28.20555803802997700 ) ) ; +#75641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75642 = VERTEX_POINT ( 'NONE', #1163 ) ; +#75643 = CARTESIAN_POINT ( 'NONE', ( -2.438065798940688200, 18.11613388835921500, -28.57723500840068100 ) ) ; +#75644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57519, #32493, #63793, #26535 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859843586800E-007, 0.0008759659331884726000 ), + .UNSPECIFIED. ) ; +#75645 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194905800, 54.83849307182666200, -28.68631150211663400 ) ) ; +#75646 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992900, 9.418457393421045200, -28.68863412692833100 ) ) ; +#75647 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 65.50000000000001400, 4.650848422521012700 ) ) ; +#75648 = FACE_OUTER_BOUND ( 'NONE', #38348, .T. ) ; +#75649 = EDGE_LOOP ( 'NONE', ( #70906, #68890, #72965, #34705 ) ) ; +#75650 = CARTESIAN_POINT ( 'NONE', ( 11.21425855654337600, 60.07527064970116700, -28.39317435246118400 ) ) ; +#75651 = CARTESIAN_POINT ( 'NONE', ( -17.07380754911115900, 90.40166528437779900, -28.28704243186578500 ) ) ; +#75652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75653 = ORIENTED_EDGE ( 'NONE', *, *, #15749, .F. ) ; +#75654 = FACE_OUTER_BOUND ( 'NONE', #69137, .T. ) ; +#75655 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#75656 = AXIS2_PLACEMENT_3D ( 'NONE', #12684, #56156, #18906 ) ; +#75657 = PLANE ( 'NONE', #45266 ) ; +#75658 = ORIENTED_EDGE ( 'NONE', *, *, #22464, .T. ) ; +#75659 = ADVANCED_FACE ( 'NONE', ( #10388 ), #6470, .F. ) ; +#75660 = AXIS2_PLACEMENT_3D ( 'NONE', #54374, #29668, #73175 ) ; +#75661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75662 = CIRCLE ( 'NONE', #25008, 9.500000000000097700 ) ; +#75663 = ORIENTED_EDGE ( 'NONE', *, *, #63219, .T. ) ; +#75664 = EDGE_CURVE ( 'NONE', #77335, #12763, #23033, .T. ) ; +#75665 = AXIS2_PLACEMENT_3D ( 'NONE', #74997, #37431, #37698 ) ; +#75666 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23183, #16928, #35441, #66695 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.818317413779077500E-016, 0.001179148174663468700 ), + .UNSPECIFIED. ) ; +#75667 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195939300, 43.65857157145701700, -28.37229765499282100 ) ) ; +#75668 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 30.66666666666667500, -5.205558038030003100 ) ) ; +#75669 = EDGE_LOOP ( 'NONE', ( #67688, #51137, #46646 ) ) ; +#75670 = AXIS2_PLACEMENT_3D ( 'NONE', #52559, #15333, #58833 ) ; +#75671 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52834, #9309, #59097, #21846, #65398, #28136, #71623, #34362 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001335052463302534300, 0.002002578694953799000, 0.002670104926605063900 ), + .UNSPECIFIED. ) ; +#75672 = CARTESIAN_POINT ( 'NONE', ( 8.272691540716740700, 75.79999999999999700, -28.53979898350160100 ) ) ; +#75673 = CIRCLE ( 'NONE', #15603, 10.50000000000009600 ) ; +#75674 = CIRCLE ( 'NONE', #58959, 10.00000000000009400 ) ; +#75675 = ORIENTED_EDGE ( 'NONE', *, *, #78771, .T. ) ; +#75676 = EDGE_LOOP ( 'NONE', ( #68911, #25944, #5788 ) ) ; +#75677 = AXIS2_PLACEMENT_3D ( 'NONE', #27241, #70726, #33472 ) ; +#75678 = VERTEX_POINT ( 'NONE', #38403 ) ; +#75679 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 75.79999999999998300, -28.20555803802997700 ) ) ; +#75680 = ORIENTED_EDGE ( 'NONE', *, *, #68459, .F. ) ; +#75681 = ORIENTED_EDGE ( 'NONE', *, *, #57555, .F. ) ; +#75682 = CARTESIAN_POINT ( 'NONE', ( 8.077747210701863500, 65.79999999999996900, -28.70555803802997700 ) ) ; +#75683 = ORIENTED_EDGE ( 'NONE', *, *, #38622, .T. ) ; +#75684 = CARTESIAN_POINT ( 'NONE', ( -11.34479765123097600, 40.81139552890385100, -28.53900456328628400 ) ) ; +#75685 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75687 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 2.000000000000008400, -1.205558038030002800 ) ) ; +#75688 = FACE_OUTER_BOUND ( 'NONE', #68150, .T. ) ; +#75690 = ORIENTED_EDGE ( 'NONE', *, *, #16409, .F. ) ; +#75689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75691 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#75692 = EDGE_CURVE ( 'NONE', #58276, #77259, #39564, .T. ) ; +#75693 = ORIENTED_EDGE ( 'NONE', *, *, #7652, .F. ) ; +#75694 = ORIENTED_EDGE ( 'NONE', *, *, #44141, .T. ) ; +#75695 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#75696 = EDGE_CURVE ( 'NONE', #48353, #59471, #3439, .T. ) ; +#75697 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75698 = CARTESIAN_POINT ( 'NONE', ( 19.54385106209677000, 0.9119795094605130900, -22.88071574731923600 ) ) ; +#75699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75701 = FACE_OUTER_BOUND ( 'NONE', #8018, .T. ) ; +#75702 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75703 = EDGE_CURVE ( 'NONE', #58003, #39696, #41513, .T. ) ; +#75704 = VERTEX_POINT ( 'NONE', #69959 ) ; +#75705 = ADVANCED_FACE ( 'NONE', ( #8391 ), #4518, .T. ) ; +#75706 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#75707 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#75708 = EDGE_CURVE ( 'NONE', #80648, #52379, #21096, .T. ) ; +#75709 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 36.50000000000000000, 2.454695999814385600 ) ) ; +#75710 = EDGE_CURVE ( 'NONE', #60011, #35371, #70695, .T. ) ; +#75711 = CIRCLE ( 'NONE', #6215, 10.50000000000009600 ) ; +#75712 = VERTEX_POINT ( 'NONE', #39216 ) ; +#75713 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#75714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75715 = CARTESIAN_POINT ( 'NONE', ( -10.03177803894782400, 70.28233213024648800, -28.25051428653847200 ) ) ; +#75716 = ORIENTED_EDGE ( 'NONE', *, *, #54514, .T. ) ; +#75717 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#75718 = ORIENTED_EDGE ( 'NONE', *, *, #53813, .T. ) ; +#75719 = CARTESIAN_POINT ( 'NONE', ( 17.83887090208089900, 97.27774180416223300, -26.95707375742662400 ) ) ; +#75720 = ADVANCED_FACE ( 'NONE', ( #37584 ), #64023, .T. ) ; +#75721 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#75722 = AXIS2_PLACEMENT_3D ( 'NONE', #77614, #40340, #3071 ) ; +#75723 = EDGE_CURVE ( 'NONE', #71304, #40985, #69769, .T. ) ; +#75724 = CARTESIAN_POINT ( 'NONE', ( 9.695954216609685300, 60.13716795162641700, -28.48697406221641200 ) ) ; +#75725 = VERTEX_POINT ( 'NONE', #33255 ) ; +#75726 = EDGE_CURVE ( 'NONE', #42672, #17474, #55295, .T. ) ; +#75727 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671533200, 71.93585231025926400, -28.38420446581315900 ) ) ; +#75728 = EDGE_CURVE ( 'NONE', #24597, #64092, #40849, .T. ) ; +#75729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75730 = CARTESIAN_POINT ( 'NONE', ( 4.424827886023193800E-015, 58.17143691309412600, -28.36981695106784300 ) ) ; +#75731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14865, #21408, #21675, #65211 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002542894374278324400, 0.0005468822770175596600 ), + .UNSPECIFIED. ) ; +#75732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75733 = CARTESIAN_POINT ( 'NONE', ( 16.41529105773326300, 94.43058211546652100, -28.29658534940813700 ) ) ; +#75734 = AXIS2_PLACEMENT_3D ( 'NONE', #62451, #68695, #43635 ) ; +#75735 = CONICAL_SURFACE ( 'NONE', #437, 10.00000000000009400, 0.7853981633974447300 ) ; +#75736 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75737 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75738 = ADVANCED_FACE ( 'NONE', ( #54142 ), #21030, .T. ) ; +#75739 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002800, 18.53085164125335600, -28.45573375118225100 ) ) ; +#75740 = VERTEX_POINT ( 'NONE', #52255 ) ; +#75741 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#75742 = VERTEX_POINT ( 'NONE', #15022 ) ; +#75743 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188001000, 50.03085164125333500, -28.45573375118225800 ) ) ; +#75744 = CARTESIAN_POINT ( 'NONE', ( 10.56829269651168500, 51.99560977511637100, -28.70555803803014400 ) ) ; +#75745 = ORIENTED_EDGE ( 'NONE', *, *, #25872, .F. ) ; +#75746 = AXIS2_PLACEMENT_3D ( 'NONE', #59079, #65381, #15569 ) ; +#75747 = AXIS2_PLACEMENT_3D ( 'NONE', #60854, #23584, #67090 ) ; +#75748 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75750 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50105, #74903, #19133, #62667 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.170520653170729700E-016, 0.002676326193402512000 ), + .UNSPECIFIED. ) ; +#75751 = AXIS2_PLACEMENT_3D ( 'NONE', #49463, #12253, #55742 ) ; +#75752 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567146500, 28.85339758437810100, -28.20555803802994200 ) ) ; +#75753 = ADVANCED_FACE ( 'NONE', ( #56102 ), #66813, .T. ) ; +#75754 = CIRCLE ( 'NONE', #20706, 10.50000000000009600 ) ; +#75755 = FACE_OUTER_BOUND ( 'NONE', #16979, .T. ) ; +#75756 = VERTEX_POINT ( 'NONE', #27558 ) ; +#75757 = ORIENTED_EDGE ( 'NONE', *, *, #76180, .T. ) ; +#75758 = ORIENTED_EDGE ( 'NONE', *, *, #13044, .T. ) ; +#75759 = CONICAL_SURFACE ( 'NONE', #56441, 10.50000000000009600, 0.7853981633974500600 ) ; +#75760 = ORIENTED_EDGE ( 'NONE', *, *, #31080, .T. ) ; +#75761 = EDGE_LOOP ( 'NONE', ( #14279, #56657, #16328 ) ) ; +#75762 = ORIENTED_EDGE ( 'NONE', *, *, #33127, .T. ) ; +#75764 = ORIENTED_EDGE ( 'NONE', *, *, #25212, .T. ) ; +#75763 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, -49.81214711292819400, 16.29444196196998700 ) ) ; +#75765 = EDGE_LOOP ( 'NONE', ( #20540, #69336, #65887, #47829 ) ) ; +#75766 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 8.000000000000012400, 3.794441961969998300 ) ) ; +#75767 = AXIS2_PLACEMENT_3D ( 'NONE', #78708, #41409, #4159 ) ; +#75768 = ORIENTED_EDGE ( 'NONE', *, *, #31440, .T. ) ; +#75769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75770 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48029, #23058, #72834, #10809 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099549601210800E-007, 0.0008759529789575333600 ), + .UNSPECIFIED. ) ; +#75771 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 57.22261628933269200, -28.70555803802997700 ) ) ; +#75772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75773 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 33.15857157145700300, -28.20555803802996700 ) ) ; +#75774 = EDGE_LOOP ( 'NONE', ( #19879, #2139, #71087 ) ) ; +#75775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75776 = CIRCLE ( 'NONE', #55819, 9.500000000000099500 ) ; +#75777 = VERTEX_POINT ( 'NONE', #33792 ) ; +#75778 = ORIENTED_EDGE ( 'NONE', *, *, #31780, .T. ) ; +#75779 = ORIENTED_EDGE ( 'NONE', *, *, #30482, .T. ) ; +#75780 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75781 = EDGE_CURVE ( 'NONE', #12176, #14526, #26425, .T. ) ; +#75782 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812500, 79.60439022488336000, -28.70555803802997700 ) ) ; +#75783 = EDGE_LOOP ( 'NONE', ( #79787, #22329, #24017, #20518, #76737, #63767 ) ) ; +#75784 = EDGE_LOOP ( 'NONE', ( #31895, #69368, #53448, #34914 ) ) ; +#75785 = AXIS2_PLACEMENT_3D ( 'NONE', #8964, #52487, #15263 ) ; +#75786 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75787 = CIRCLE ( 'NONE', #8816, 10.00000000000009200 ) ; +#75788 = CARTESIAN_POINT ( 'NONE', ( 5.501847909390807700, 35.68533208989815400, -28.53910738522649000 ) ) ; +#75790 = EDGE_LOOP ( 'NONE', ( #32556, #23645, #76048, #22947 ) ) ; +#75789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75791 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#75792 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188353800, 39.20564881207762700, -28.41114655922299500 ) ) ; +#75793 = CARTESIAN_POINT ( 'NONE', ( 3.469479452198304800, 91.59999999999999400, -28.70555803802999500 ) ) ; +#75794 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#75795 = AXIS2_PLACEMENT_3D ( 'NONE', #28229, #34455, #65480 ) ; +#75796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75797 = FACE_OUTER_BOUND ( 'NONE', #14119, .T. ) ; +#75798 = EDGE_LOOP ( 'NONE', ( #32167, #14873, #75601, #76030, #70306 ) ) ; +#75799 = CARTESIAN_POINT ( 'NONE', ( -18.71709413506527400, 2.565811689808226600, -25.39382583721321800 ) ) ; +#75800 = ORIENTED_EDGE ( 'NONE', *, *, #63021, .F. ) ; +#75801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75802 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686878300, 61.58005252438373100, -28.24986299608874100 ) ) ; +#75803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75804 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999962300, 59.63176086632792300, -28.70555803802997700 ) ) ; +#75806 = EDGE_LOOP ( 'NONE', ( #58393, #65120, #52210 ) ) ; +#75805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#75807 = CARTESIAN_POINT ( 'NONE', ( -4.378021327471822500, 49.63131911501876200, -28.51286550264510200 ) ) ; +#75808 = AXIS2_PLACEMENT_3D ( 'NONE', #9858, #53364, #16111 ) ; +#75809 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72112, #28614, #3797, #47291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914278833600E-007, 0.0008482521192576701100 ), + .UNSPECIFIED. ) ; +#75810 = ADVANCED_FACE ( 'NONE', ( #52175 ), #33712, .T. ) ; +#75811 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818079600, 61.65075715145309900, -28.20555803802997700 ) ) ; +#75812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75813 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063277600, 41.59789380924897300, -28.25343951603330700 ) ) ; +#75814 = EDGE_CURVE ( 'NONE', #67964, #79130, #50225, .T. ) ; +#75815 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 13.83333333333335500, 0.9380355014189731800 ) ) ; +#75816 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416090400, 20.01125751638927500, -28.53740755999534400 ) ) ; +#75817 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 80.34267608797617300, -28.20555803803014400 ) ) ; +#75818 = CARTESIAN_POINT ( 'NONE', ( 16.03160744576917600, 45.54999999999999000, -28.65220501466659500 ) ) ; +#75819 = CONICAL_SURFACE ( 'NONE', #34322, 10.00000000000009200, 0.7853981633974447300 ) ; +#75820 = ORIENTED_EDGE ( 'NONE', *, *, #37201, .F. ) ; +#75821 = EDGE_LOOP ( 'NONE', ( #6984, #79206, #56787, #66075 ) ) ; +#75822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75823 = ADVANCED_FACE ( 'NONE', ( #19109 ), #64893, .F. ) ; +#75825 = VERTEX_POINT ( 'NONE', #9285 ) ; +#75824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75826 = CARTESIAN_POINT ( 'NONE', ( -10.03178561562175600, 61.31767869357339900, -28.25052235028430300 ) ) ; +#75827 = FACE_OUTER_BOUND ( 'NONE', #26993, .T. ) ; +#75828 = ORIENTED_EDGE ( 'NONE', *, *, #42409, .T. ) ; +#75829 = CIRCLE ( 'NONE', #51541, 5.000000000000000900 ) ; +#75830 = EDGE_LOOP ( 'NONE', ( #57768, #54754, #44405, #64734 ) ) ; +#75831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75832 = CARTESIAN_POINT ( 'NONE', ( 10.77884208558771400, 30.93523632220587800, -28.30315276798566200 ) ) ; +#75834 = EDGE_CURVE ( 'NONE', #73316, #46838, #17177, .T. ) ; +#75833 = ORIENTED_EDGE ( 'NONE', *, *, #50671, .T. ) ; +#75835 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002800, 18.53085164125335600, -28.45573375118225100 ) ) ; +#75836 = EDGE_CURVE ( 'NONE', #69283, #65129, #11945, .T. ) ; +#75837 = ORIENTED_EDGE ( 'NONE', *, *, #22602, .F. ) ; +#75838 = ADVANCED_FACE ( 'NONE', ( #74620 ), #15219, .F. ) ; +#75839 = CONICAL_SURFACE ( 'NONE', #52741, 10.50000000000009600, 0.7853981633974518300 ) ; +#75840 = ORIENTED_EDGE ( 'NONE', *, *, #19987, .F. ) ; +#75841 = ORIENTED_EDGE ( 'NONE', *, *, #72494, .F. ) ; +#75842 = ORIENTED_EDGE ( 'NONE', *, *, #65641, .T. ) ; +#75843 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#75844 = ORIENTED_EDGE ( 'NONE', *, *, #46369, .F. ) ; +#75845 = ORIENTED_EDGE ( 'NONE', *, *, #26775, .T. ) ; +#75846 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75847 = AXIS2_PLACEMENT_3D ( 'NONE', #12366, #55851, #18607 ) ; +#75848 = ORIENTED_EDGE ( 'NONE', *, *, #43525, .T. ) ; +#75849 = EDGE_CURVE ( 'NONE', #16279, #9891, #78259, .T. ) ; +#75850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51756, #2008, #20800, #64348, #27070, #70562 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001586792886075440300, 0.003173585772150880600 ), + .UNSPECIFIED. ) ; +#75851 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75852 = EDGE_CURVE ( 'NONE', #55748, #44111, #31775, .T. ) ; +#75853 = CARTESIAN_POINT ( 'NONE', ( -2.452258779925621500, 42.28032162676581900, -28.55467576046957100 ) ) ; +#75854 = EDGE_CURVE ( 'NONE', #47665, #62491, #63811, .T. ) ; +#75855 = ADVANCED_FACE ( 'NONE', ( #602 ), #46314, .T. ) ; +#75856 = EDGE_CURVE ( 'NONE', #24749, #64447, #62925, .T. ) ; +#75857 = CONICAL_SURFACE ( 'NONE', #53691, 10.50000000000009600, 0.7853981633974518300 ) ; +#75858 = AXIS2_PLACEMENT_3D ( 'NONE', #48903, #11695, #55177 ) ; +#75859 = ORIENTED_EDGE ( 'NONE', *, *, #43939, .T. ) ; +#75861 = ORIENTED_EDGE ( 'NONE', *, *, #36166, .T. ) ; +#75860 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 78.16545993132820100, -28.70555803802999500 ) ) ; +#75862 = ORIENTED_EDGE ( 'NONE', *, *, #68475, .T. ) ; +#75863 = ORIENTED_EDGE ( 'NONE', *, *, #60508, .F. ) ; +#75864 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37160, #74467, #49653, #12449 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0004636637122921289900, 0.0007303749718168089900 ), + .UNSPECIFIED. ) ; +#75865 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609669700, 61.46283204837337200, -28.48697406221659300 ) ) ; +#75866 = FACE_OUTER_BOUND ( 'NONE', #40573, .T. ) ; +#75867 = ADVANCED_FACE ( 'NONE', ( #79462 ), #77501, .F. ) ; +#75868 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 57.50000000000000700, -4.865812075874393000 ) ) ; +#75869 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #43680, #6447 ) ; +#75870 = ORIENTED_EDGE ( 'NONE', *, *, #14174, .F. ) ; +#75871 = AXIS2_PLACEMENT_3D ( 'NONE', #5368, #24143, #11639 ) ; +#75872 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#75873 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75874 = ORIENTED_EDGE ( 'NONE', *, *, #9465, .F. ) ; +#75875 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655525700, 20.67701665379217200, -28.20555803802994500 ) ) ; +#75876 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 22.49999999999999300, -7.061964498581022400 ) ) ; +#75877 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 10.00000000000000000, -28.70555803803001300 ) ) ; +#75878 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655948500, 49.42298334620738800, -28.20555803802997400 ) ) ; +#75879 = CONICAL_SURFACE ( 'NONE', #79625, 10.00000000000009200, 0.7853981633974447300 ) ; +#75880 = ORIENTED_EDGE ( 'NONE', *, *, #36187, .F. ) ; +#75881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75882 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75883 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 59.83333333333333600, 9.794441961969999600 ) ) ; +#75884 = ORIENTED_EDGE ( 'NONE', *, *, #73465, .F. ) ; +#75885 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.70555803802992800 ) ) ; +#75886 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#75887 = AXIS2_PLACEMENT_3D ( 'NONE', #39718, #64245, #76987 ) ; +#75888 = EDGE_CURVE ( 'NONE', #1277, #25412, #29862, .T. ) ; +#75889 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75890 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 60.34267608797603800, -28.20555803802997700 ) ) ; +#75891 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -18.70555803803001300 ) ) ; +#75892 = CIRCLE ( 'NONE', #78025, 10.50000000000009600 ) ; +#75893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75894 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75895 = EDGE_CURVE ( 'NONE', #69526, #41059, #13288, .T. ) ; +#75896 = FACE_OUTER_BOUND ( 'NONE', #72429, .T. ) ; +#75897 = CARTESIAN_POINT ( 'NONE', ( 3.556183125752454500E-014, 53.65857157145704500, -28.20555803802997700 ) ) ; +#75898 = EDGE_LOOP ( 'NONE', ( #35079, #74587, #37968, #15408, #429 ) ) ; +#75899 = AXIS2_PLACEMENT_3D ( 'NONE', #44620, #7400, #50888 ) ; +#75900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75902 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75903 = CARTESIAN_POINT ( 'NONE', ( -12.21669353480418600, 60.79999999999999000, -28.32841359973436800 ) ) ; +#75904 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500186700, 59.83662311806141800, -28.37223523914928000 ) ) ; +#75905 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#75906 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45231, #1729, #14269, #57784 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.154400154137047900E-016, 0.001246264537623647600 ), + .UNSPECIFIED. ) ; +#75907 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75908 = LINE ( 'NONE', #73570, #59376 ) ; +#75909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75910 = EDGE_LOOP ( 'NONE', ( #60100, #58443, #50894, #29330 ) ) ; +#75911 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#75912 = AXIS2_PLACEMENT_3D ( 'NONE', #45582, #2356, #70646 ) ; +#75913 = EDGE_LOOP ( 'NONE', ( #14320, #41343, #46104, #35896 ) ) ; +#75914 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 63.33333333333333600, -8.133761268305512700 ) ) ; +#75915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75917 = EDGE_LOOP ( 'NONE', ( #933, #36722, #51606, #27627 ) ) ; +#75918 = CIRCLE ( 'NONE', #22513, 10.00000000000009200 ) ; +#75919 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000700, 57.14999999999999900, -1.205558038030005300 ) ) ; +#75920 = ORIENTED_EDGE ( 'NONE', *, *, #70853, .F. ) ; +#75921 = EDGE_LOOP ( 'NONE', ( #29520, #66635, #28247, #30839, #51537, #44807, #50625, #860 ) ) ; +#75922 = EDGE_LOOP ( 'NONE', ( #64406, #72941, #43351 ) ) ; +#75923 = ORIENTED_EDGE ( 'NONE', *, *, #59413, .T. ) ; +#75924 = EDGE_LOOP ( 'NONE', ( #1386, #11698, #57342, #30299 ) ) ; +#75925 = ORIENTED_EDGE ( 'NONE', *, *, #55482, .T. ) ; +#75926 = ORIENTED_EDGE ( 'NONE', *, *, #16576, .T. ) ; +#75927 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471413000, 9.968680884981180800, -28.51286550264493200 ) ) ; +#75928 = CARTESIAN_POINT ( 'NONE', ( -10.96822196105215300, 71.31766786975350700, -28.25051428653849300 ) ) ; +#75929 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999953500, 61.43250300240195800, -28.20555803803014400 ) ) ; +#75930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75931 = VERTEX_POINT ( 'NONE', #10393 ) ; +#75932 = CIRCLE ( 'NONE', #27625, 10.00000000000009400 ) ; +#75933 = EDGE_CURVE ( 'NONE', #33173, #56207, #49292, .T. ) ; +#75934 = ORIENTED_EDGE ( 'NONE', *, *, #44367, .F. ) ; +#75935 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#75936 = ORIENTED_EDGE ( 'NONE', *, *, #6758, .F. ) ; +#75937 = ORIENTED_EDGE ( 'NONE', *, *, #57727, .T. ) ; +#75938 = ADVANCED_FACE ( 'NONE', ( #48273 ), #11331, .T. ) ; +#75939 = EDGE_LOOP ( 'NONE', ( #44255, #53778, #74196, #78762, #76905 ) ) ; +#75940 = ORIENTED_EDGE ( 'NONE', *, *, #14620, .T. ) ; +#75941 = CARTESIAN_POINT ( 'NONE', ( 17.14651939117038600, 69.08511947570718800, -28.47263588290810100 ) ) ; +#75942 = ADVANCED_FACE ( 'NONE', ( #68761 ), #58998, .T. ) ; +#75943 = CONICAL_SURFACE ( 'NONE', #31132, 10.00000000000009600, 0.7853981633974447300 ) ; +#75944 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 28.50000000000001100, 4.650848422521012700 ) ) ; +#75945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64303, #20763, #2230, #45729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885674039870500E-007, 0.0007987728781051966300 ), + .UNSPECIFIED. ) ; +#75947 = VERTEX_POINT ( 'NONE', #16915 ) ; +#75948 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099360800, 18.06267502090561200, -28.41043597897493100 ) ) ; +#75949 = ADVANCED_FACE ( 'NONE', ( #27905 ), #25933, .F. ) ; +#75950 = EDGE_CURVE ( 'NONE', #61292, #10382, #34876, .T. ) ; +#75951 = CONICAL_SURFACE ( 'NONE', #75912, 10.50000000000009600, 0.7853981633974500600 ) ; +#75953 = ORIENTED_EDGE ( 'NONE', *, *, #32588, .T. ) ; +#75952 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75955 = EDGE_CURVE ( 'NONE', #47124, #79164, #2542, .T. ) ; +#75954 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #190, #50468, #69267, #32022 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002575457453807184900, 0.0005317208426584967600 ), + .UNSPECIFIED. ) ; +#75956 = ORIENTED_EDGE ( 'NONE', *, *, #10815, .F. ) ; +#75957 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 73.65857157145660500, -28.20555803803030800 ) ) ; +#75958 = AXIS2_PLACEMENT_3D ( 'NONE', #31014, #37227, #36966 ) ; +#75959 = EDGE_CURVE ( 'NONE', #69802, #65265, #20411, .T. ) ; +#75960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75962 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75963 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, -0.1666666666666588000, -4.152999154772353500 ) ) ; +#75964 = EDGE_CURVE ( 'NONE', #26728, #31298, #44351, .T. ) ; +#75965 = AXIS2_PLACEMENT_3D ( 'NONE', #52021, #14792, #58316 ) ; +#75966 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919938700, 20.68929190448941200, -28.20555803802995200 ) ) ; +#75967 = CIRCLE ( 'NONE', #25015, 9.500000000000099500 ) ; +#75968 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 75.79999999999998300, -28.20555803802997700 ) ) ; +#75969 = ORIENTED_EDGE ( 'NONE', *, *, #24613, .F. ) ; +#75970 = ORIENTED_EDGE ( 'NONE', *, *, #57496, .T. ) ; +#75971 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280153800, 50.90033558196108000, -28.70555803802997700 ) ) ; +#75972 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 90.10230989102912200, -28.61774594594330900 ) ) ; +#75973 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75974 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.20555803802995200 ) ) ; +#75975 = ORIENTED_EDGE ( 'NONE', *, *, #46861, .F. ) ; +#75976 = CARTESIAN_POINT ( 'NONE', ( 17.24306493325777700, 61.43482203710600200, -28.29548531139009200 ) ) ; +#75977 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 27.69543746431598300, -28.61277292027075700 ) ) ; +#75978 = AXIS2_PLACEMENT_3D ( 'NONE', #52673, #15431, #58935 ) ; +#75979 = CARTESIAN_POINT ( 'NONE', ( -4.214258556544026900, 70.07527064970101100, -28.39317435246130800 ) ) ; +#75980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75981 = EDGE_CURVE ( 'NONE', #57451, #50523, #5961, .T. ) ; +#75982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #40440, #77701, #21955, #65501 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881213710116700E-007, 0.0008724366121415439200 ), + .UNSPECIFIED. ) ; +#75983 = EDGE_CURVE ( 'NONE', #74524, #691, #72291, .T. ) ; +#75984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75985 = AXIS2_PLACEMENT_3D ( 'NONE', #13991, #20240, #51184 ) ; +#75987 = CYLINDRICAL_SURFACE ( 'NONE', #13799, 10.00000000000000200 ) ; +#75988 = ORIENTED_EDGE ( 'NONE', *, *, #12613, .F. ) ; +#75989 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 49.48922577050341700, -28.37255355648633100 ) ) ; +#75990 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75991 = ORIENTED_EDGE ( 'NONE', *, *, #35139, .T. ) ; +#75992 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 34.33333333333334300, -3.705558038030004400 ) ) ; +#75993 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#75994 = FACE_OUTER_BOUND ( 'NONE', #22229, .T. ) ; +#75995 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75996 = ORIENTED_EDGE ( 'NONE', *, *, #37933, .T. ) ; +#75997 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000004800, 16.16545993132822200, -28.70555803802997400 ) ) ; +#75998 = VERTEX_POINT ( 'NONE', #48684 ) ; +#75999 = ORIENTED_EDGE ( 'NONE', *, *, #41897, .F. ) ; +#76000 = ORIENTED_EDGE ( 'NONE', *, *, #996, .T. ) ; +#76001 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 41.62753447840886200, -28.38801640354855500 ) ) ; +#76003 = ORIENTED_EDGE ( 'NONE', *, *, #60620, .F. ) ; +#76002 = EDGE_CURVE ( 'NONE', #5527, #20363, #60967, .T. ) ; +#76004 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609213400, 13.41466791010162200, -28.53910738522661800 ) ) ; +#76005 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 74.37738371066727400, -28.70555803802997700 ) ) ; +#76006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76007 = AXIS2_PLACEMENT_3D ( 'NONE', #43810, #18829, #25086 ) ; +#76008 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999989300, 69.98922577050325300, -28.37255355648651200 ) ) ; +#76009 = CARTESIAN_POINT ( 'NONE', ( 17.37141821671398000, 90.16749699759719800, -28.25056166218057600 ) ) ; +#76010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76011 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65755, #59496, #15963, #72015 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389876712400E-007, 0.0008082646680357296500 ), + .UNSPECIFIED. ) ; +#76012 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76013 = CARTESIAN_POINT ( 'NONE', ( 17.06581962135468800, 42.50863606381447800, -28.49020639256002200 ) ) ; +#76014 = FACE_OUTER_BOUND ( 'NONE', #60017, .T. ) ; +#76015 = EDGE_LOOP ( 'NONE', ( #9659, #35022, #23727, #44999 ) ) ; +#76016 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040730900, 36.94142842854297000, -28.37229765499279600 ) ) ; +#76017 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782560200, 60.16054007504464400, -28.34042301926892900 ) ) ; +#76018 = EDGE_LOOP ( 'NONE', ( #14391, #1364, #75057, #8766 ) ) ; +#76019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76020 = ORIENTED_EDGE ( 'NONE', *, *, #12251, .F. ) ; +#76021 = VERTEX_POINT ( 'NONE', #36207 ) ; +#76022 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#76023 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76024 = CIRCLE ( 'NONE', #60796, 10.00000000000009200 ) ; +#76025 = CARTESIAN_POINT ( 'NONE', ( 17.06616028005394600, 38.09406971703067800, -28.49013149708311200 ) ) ; +#76026 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#76027 = EDGE_LOOP ( 'NONE', ( #45294, #78401, #2936, #72263 ) ) ; +#76028 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#76029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76030 = ORIENTED_EDGE ( 'NONE', *, *, #62048, .F. ) ; +#76031 = AXIS2_PLACEMENT_3D ( 'NONE', #16126, #59374, #53383 ) ; +#76032 = CONICAL_SURFACE ( 'NONE', #51330, 10.50000000000009600, 0.7853981633974500600 ) ; +#76033 = EDGE_LOOP ( 'NONE', ( #14912, #56297, #37734, #74908 ) ) ; +#76034 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51594, #20381, #76385, #14382 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.453269466693398700E-018, 0.001246264537621183900 ), + .UNSPECIFIED. ) ; +#76035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76036 = ADVANCED_FACE ( 'NONE', ( #75538 ), #23979, .F. ) ; +#76037 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 5.833333333333348100, -6.205558038030004800 ) ) ; +#76038 = AXIS2_PLACEMENT_3D ( 'NONE', #23041, #41772, #4528 ) ; +#76039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76040 = CARTESIAN_POINT ( 'NONE', ( 9.653846153846179900, 70.79999999999982700, -28.55171188418389900 ) ) ; +#76041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76042 = EDGE_CURVE ( 'NONE', #2388, #73931, #40500, .T. ) ; +#76043 = CARTESIAN_POINT ( 'NONE', ( 17.32922790642998100, 70.46872208558184500, -28.43092544535690500 ) ) ; +#76044 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#76045 = CARTESIAN_POINT ( 'NONE', ( 4.118917725798550800, 61.10238820582976900, -28.32098513914474900 ) ) ; +#76046 = ORIENTED_EDGE ( 'NONE', *, *, #17253, .T. ) ; +#76047 = ORIENTED_EDGE ( 'NONE', *, *, #31554, .T. ) ; +#76048 = ORIENTED_EDGE ( 'NONE', *, *, #27015, .F. ) ; +#76049 = CARTESIAN_POINT ( 'NONE', ( -1.645813086124917800, 55.13282980700499500, -28.53914313452751400 ) ) ; +#76050 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76051 = ADVANCED_FACE ( 'NONE', ( #57058 ), #55088, .F. ) ; +#76052 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76053 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76054 = CARTESIAN_POINT ( 'NONE', ( 16.54352418670956500, 42.15863441772057000, -28.48677465922828500 ) ) ; +#76055 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807146000, 86.79999999999996900, -28.70555803802997700 ) ) ; +#76056 = CONICAL_SURFACE ( 'NONE', #53336, 10.00000000000009200, 0.7853981633974447300 ) ; +#76057 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ; +#76058 = VERTEX_POINT ( 'NONE', #30513 ) ; +#76059 = CARTESIAN_POINT ( 'NONE', ( 3.926508157484832800, 70.22161678501176100, -28.29547179040455900 ) ) ; +#76060 = EDGE_CURVE ( 'NONE', #9667, #10766, #57802, .T. ) ; +#76061 = CARTESIAN_POINT ( 'NONE', ( 11.56182508409089300, 41.48385710212512100, -28.57719681746179300 ) ) ; +#76062 = ORIENTED_EDGE ( 'NONE', *, *, #40084, .T. ) ; +#76063 = FACE_OUTER_BOUND ( 'NONE', #55512, .T. ) ; +#76064 = EDGE_CURVE ( 'NONE', #54306, #28278, #7393, .T. ) ; +#76065 = EDGE_LOOP ( 'NONE', ( #74397, #51512, #32986, #5917 ) ) ; +#76066 = CARTESIAN_POINT ( 'NONE', ( -17.21439066057900600, 5.571218541242243900, -27.67137776882191600 ) ) ; +#76067 = EDGE_LOOP ( 'NONE', ( #33039, #54136, #41890, #35144 ) ) ; +#76068 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465696200, 80.94992009694571800, -28.43638873268704600 ) ) ; +#76069 = CARTESIAN_POINT ( 'NONE', ( 17.59743545783826600, 81.43250300240180200, -28.23966044827386000 ) ) ; +#76070 = ORIENTED_EDGE ( 'NONE', *, *, #47583, .T. ) ; +#76071 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76073 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76074 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782538400, 61.43945992495501000, -28.34042301926918800 ) ) ; +#76075 = CIRCLE ( 'NONE', #28647, 9.500000000000095900 ) ; +#76076 = EDGE_CURVE ( 'NONE', #26420, #66036, #42428, .T. ) ; +#76077 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78850, #35335, #16818, #60351 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.346507514538369300E-017, 0.002676326193402301700 ), + .UNSPECIFIED. ) ; +#76078 = CARTESIAN_POINT ( 'NONE', ( -10.12868771501990400, 7.471333297323885100, -28.40074127503903500 ) ) ; +#76079 = EDGE_CURVE ( 'NONE', #5301, #62053, #71664, .T. ) ; +#76080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76081 = AXIS2_PLACEMENT_3D ( 'NONE', #73661, #36375, #79912 ) ; +#76082 = CIRCLE ( 'NONE', #24404, 10.00000000000009200 ) ; +#76083 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76084 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 11.66666666666667500, -5.205558038030003100 ) ) ; +#76085 = ORIENTED_EDGE ( 'NONE', *, *, #59529, .F. ) ; +#76086 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063265700, 31.09789380924897300, -28.25343951603329600 ) ) ; +#76087 = CARTESIAN_POINT ( 'NONE', ( 17.70865097826460400, 61.64948861668521100, -28.33414295261598800 ) ) ; +#76088 = EDGE_LOOP ( 'NONE', ( #60626, #56311, #65784, #22487 ) ) ; +#76089 = ORIENTED_EDGE ( 'NONE', *, *, #58448, .T. ) ; +#76090 = ORIENTED_EDGE ( 'NONE', *, *, #52818, .F. ) ; +#76091 = LINE ( 'NONE', #69910, #63479 ) ; +#76092 = VERTEX_POINT ( 'NONE', #30771 ) ; +#76093 = CARTESIAN_POINT ( 'NONE', ( -9.530136888809618500, 9.146957350529762100, -28.66910751791843400 ) ) ; +#76094 = CONICAL_SURFACE ( 'NONE', #48715, 10.50000000000009800, 0.7853981633974500600 ) ; +#76095 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949247200, 49.07379779496241000, -28.70555803802996700 ) ) ; +#76096 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#76097 = AXIS2_PLACEMENT_3D ( 'NONE', #38528, #32574, #26361 ) ; +#76098 = CARTESIAN_POINT ( 'NONE', ( 3.064555739225054000, 70.09037803491473500, -28.29483400905895600 ) ) ; +#76099 = EDGE_CURVE ( 'NONE', #63067, #57833, #35677, .T. ) ; +#76100 = EDGE_CURVE ( 'NONE', #32984, #50710, #43320, .T. ) ; +#76101 = EDGE_CURVE ( 'NONE', #68193, #76395, #9350, .T. ) ; +#76102 = EDGE_LOOP ( 'NONE', ( #25144, #62939, #76789, #23710 ) ) ; +#76103 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76104 = CARTESIAN_POINT ( 'NONE', ( -15.85864231129047200, 35.04999999999999700, -28.50266868976636700 ) ) ; +#76105 = AXIS2_PLACEMENT_3D ( 'NONE', #45871, #76910, #2360 ) ; +#76106 = VECTOR ( 'NONE', #77694, 1000.000000000000000 ) ; +#76107 = ORIENTED_EDGE ( 'NONE', *, *, #19216, .T. ) ; +#76108 = EDGE_LOOP ( 'NONE', ( #71141, #18034, #50076 ) ) ; +#76109 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#76110 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76111 = EDGE_CURVE ( 'NONE', #5611, #21369, #28932, .T. ) ; +#76112 = AXIS2_PLACEMENT_3D ( 'NONE', #23432, #66955, #29720 ) ; +#76113 = AXIS2_PLACEMENT_3D ( 'NONE', #68589, #56060, #25070 ) ; +#76114 = CARTESIAN_POINT ( 'NONE', ( 14.47629486627434400, 22.66464174796073300, -28.53896444442198900 ) ) ; +#76115 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.70555803803047500 ) ) ; +#76116 = ADVANCED_FACE ( 'NONE', ( #73605 ), #20075, .F. ) ; +#76117 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#76118 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469900, 45.54999999999999700, -28.20555803802996700 ) ) ; +#76119 = EDGE_LOOP ( 'NONE', ( #38841, #594, #43154 ) ) ; +#76121 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6000, #18510, #62039, #24765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251685800, 0.003631405919786714600 ), + .UNSPECIFIED. ) ; +#76120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76122 = EDGE_LOOP ( 'NONE', ( #43571, #43884, #34489, #29404 ) ) ; +#76123 = ADVANCED_FACE ( 'NONE', ( #22018 ), #67749, .T. ) ; +#76124 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 55.33333333333334300, 1.294441961969997200 ) ) ; +#76125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76126 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567140300, 9.746602415621863400, -28.20555803803009500 ) ) ; +#76127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76128 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 20.33333333333334300, 2.794441961969998300 ) ) ; +#76129 = CONICAL_SURFACE ( 'NONE', #53810, 10.50000000000009600, 0.7853981633974500600 ) ; +#76130 = AXIS2_PLACEMENT_3D ( 'NONE', #38152, #1174, #75697 ) ; +#76131 = ORIENTED_EDGE ( 'NONE', *, *, #73629, .T. ) ; +#76132 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999998700, 41.43250300240230600, -28.20555803802997700 ) ) ; +#76133 = CONICAL_SURFACE ( 'NONE', #3436, 10.00000000000009600, 0.7853981633974447300 ) ; +#76134 = ORIENTED_EDGE ( 'NONE', *, *, #74797, .T. ) ; +#76135 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349243000, 18.70543520232814000, -28.70555803803009500 ) ) ; +#76136 = CARTESIAN_POINT ( 'NONE', ( 16.48638455847728300, 92.34319227923863600, -28.59447410321735800 ) ) ; +#76137 = ADVANCED_FACE ( 'NONE', ( #5462 ), #34671, .T. ) ; +#76138 = CONICAL_SURFACE ( 'NONE', #66880, 10.00000000000009400, 0.7853981633974447300 ) ; +#76139 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 57.66666666666667900, -10.73183747965883100 ) ) ; +#76140 = ORIENTED_EDGE ( 'NONE', *, *, #50904, .T. ) ; +#76141 = VERTEX_POINT ( 'NONE', #37784 ) ; +#76142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76144 = AXIS2_PLACEMENT_3D ( 'NONE', #72698, #35443, #78959 ) ; +#76145 = CIRCLE ( 'NONE', #19180, 9.500000000000099500 ) ; +#76146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76147 = CARTESIAN_POINT ( 'NONE', ( -9.621978672528424400, 28.63131911501858400, -28.51286550264480400 ) ) ; +#76148 = ADVANCED_FACE ( 'NONE', ( #69687 ), #1546, .T. ) ; +#76149 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, 26.44142842854296700, -28.20555803802994200 ) ) ; +#76150 = EDGE_CURVE ( 'NONE', #32242, #34010, #14416, .T. ) ; +#76151 = CARTESIAN_POINT ( 'NONE', ( -10.46481234601704300, 9.406791769321968000, -28.68794773163825000 ) ) ; +#76152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76153 = ORIENTED_EDGE ( 'NONE', *, *, #78104, .F. ) ; +#76154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76155 = CIRCLE ( 'NONE', #29098, 10.00000000000009400 ) ; +#76156 = AXIS2_PLACEMENT_3D ( 'NONE', #5612, #36601, #18122 ) ; +#76157 = ORIENTED_EDGE ( 'NONE', *, *, #55453, .F. ) ; +#76158 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#76159 = ORIENTED_EDGE ( 'NONE', *, *, #23472, .F. ) ; +#76160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76161 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725275500, 45.86787096422371200, -28.37244029424742200 ) ) ; +#76162 = VERTEX_POINT ( 'NONE', #69094 ) ; +#76163 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181919600, 61.65075715145310700, -28.20555803802997700 ) ) ; +#76164 = CIRCLE ( 'NONE', #62719, 9.500000000000099500 ) ; +#76165 = CARTESIAN_POINT ( 'NONE', ( 1.466819876342326100, 85.79999999999998300, -28.37307693585060900 ) ) ; +#76166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76167 = ORIENTED_EDGE ( 'NONE', *, *, #24218, .F. ) ; +#76168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76169 = CONICAL_SURFACE ( 'NONE', #11717, 10.00000000000009200, 0.7853981633974447300 ) ; +#76170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76171 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034485600, 10.17701665379206900, -28.20555803803018300 ) ) ; +#76172 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#76173 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#76174 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146284400, 80.34267608797554800, -28.20555803803047800 ) ) ; +#76175 = ORIENTED_EDGE ( 'NONE', *, *, #37868, .T. ) ; +#76176 = EDGE_LOOP ( 'NONE', ( #51232, #37912, #49281, #37950 ) ) ; +#76177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76179 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76180 = EDGE_CURVE ( 'NONE', #40802, #18523, #80734, .T. ) ; +#76181 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 61.16666666666665700, 6.794441961969992500 ) ) ; +#76182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76183 = FACE_OUTER_BOUND ( 'NONE', #53750, .T. ) ; +#76184 = VERTEX_POINT ( 'NONE', #31841 ) ; +#76185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#76186 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14168, #7881, #26687, #70167 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001602255851659458700, 0.0005685240369918753200 ), + .UNSPECIFIED. ) ; +#76187 = FACE_OUTER_BOUND ( 'NONE', #2770, .T. ) ; +#76188 = EDGE_CURVE ( 'NONE', #2539, #67964, #66297, .T. ) ; +#76189 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36349, #30136, #48841, #11619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735894395300E-007, 0.0009376786059871939700 ), + .UNSPECIFIED. ) ; +#76190 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#76191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76192 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#76193 = EDGE_CURVE ( 'NONE', #59974, #80528, #36587, .T. ) ; +#76194 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000003900, 71.23796787468685900, -28.38801640354854800 ) ) ; +#76195 = EDGE_CURVE ( 'NONE', #31077, #26685, #18107, .T. ) ; +#76196 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7004, #44226, #19537, #63055 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376942200 ), + .UNSPECIFIED. ) ; +#76197 = AXIS2_PLACEMENT_3D ( 'NONE', #42259, #48236, #66780 ) ; +#76198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76199 = EDGE_CURVE ( 'NONE', #23355, #45119, #51775, .T. ) ; +#76200 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#76201 = VERTEX_POINT ( 'NONE', #69340 ) ; +#76202 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 26.33333333333333900, -8.133761268305512700 ) ) ; +#76203 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 80.13716795162660800, -28.48697406221657100 ) ) ; +#76204 = AXIS2_PLACEMENT_3D ( 'NONE', #75559, #38272, #1024 ) ; +#76205 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74826, #31328, #6552, #50024 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353372408500E-007, 0.0007670609591622620600 ), + .UNSPECIFIED. ) ; +#76206 = EDGE_CURVE ( 'NONE', #7904, #65390, #37313, .T. ) ; +#76207 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.20555803803009500 ) ) ; +#76208 = EDGE_CURVE ( 'NONE', #38041, #61659, #3491, .T. ) ; +#76209 = EDGE_CURVE ( 'NONE', #36509, #16691, #53141, .T. ) ; +#76210 = ORIENTED_EDGE ( 'NONE', *, *, #22481, .T. ) ; +#76211 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76212 = ADVANCED_FACE ( 'NONE', ( #51141 ), #64985, .T. ) ; +#76213 = CONICAL_SURFACE ( 'NONE', #12611, 10.50000000000009600, 0.7853981633974500600 ) ; +#76214 = ORIENTED_EDGE ( 'NONE', *, *, #14157, .F. ) ; +#76215 = CIRCLE ( 'NONE', #3924, 9.500000000000097700 ) ; +#76216 = ORIENTED_EDGE ( 'NONE', *, *, #66025, .F. ) ; +#76217 = AXIS2_PLACEMENT_3D ( 'NONE', #59966, #66221, #3907 ) ; +#76218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76219 = VERTEX_POINT ( 'NONE', #57635 ) ; +#76220 = CIRCLE ( 'NONE', #3223, 10.00000000000009200 ) ; +#76221 = EDGE_LOOP ( 'NONE', ( #8412, #9595, #49948, #30001 ) ) ; +#76222 = CARTESIAN_POINT ( 'NONE', ( 16.15668877708519700, 75.79999999999982700, -28.63843632546337800 ) ) ; +#76223 = ORIENTED_EDGE ( 'NONE', *, *, #8839, .T. ) ; +#76224 = ADVANCED_FACE ( 'NONE', ( #65815 ), #7851, .T. ) ; +#76225 = AXIS2_PLACEMENT_3D ( 'NONE', #25783, #31754, #38237 ) ; +#76226 = ORIENTED_EDGE ( 'NONE', *, *, #22281, .T. ) ; +#76227 = AXIS2_PLACEMENT_3D ( 'NONE', #20186, #57440, #63718 ) ; +#76228 = FACE_OUTER_BOUND ( 'NONE', #16795, .T. ) ; +#76229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29530, #36023, #67299, #30065 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572401803800E-007, 0.0004669842289003271200 ), + .UNSPECIFIED. ) ; +#76230 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#76231 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181924300, 79.94924284854739900, -28.20555803802997700 ) ) ; +#76232 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, -2.333333333333328600, 4.294441961969993400 ) ) ; +#76233 = CONICAL_SURFACE ( 'NONE', #65828, 10.00000000000009200, 0.7853981633974447300 ) ; +#76234 = EDGE_LOOP ( 'NONE', ( #59122, #53992, #56735, #56670 ) ) ; +#76235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76236 = FACE_OUTER_BOUND ( 'NONE', #75566, .T. ) ; +#76237 = ORIENTED_EDGE ( 'NONE', *, *, #41085, .T. ) ; +#76238 = ADVANCED_FACE ( 'NONE', ( #17266 ), #15310, .T. ) ; +#76239 = VERTEX_POINT ( 'NONE', #1864 ) ; +#76240 = ORIENTED_EDGE ( 'NONE', *, *, #27622, .T. ) ; +#76241 = CARTESIAN_POINT ( 'NONE', ( 16.35907809823700600, 27.69543746431598300, -28.61277292027075700 ) ) ; +#76242 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76243 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537174600, 60.34267608797618000, -28.20555803803014400 ) ) ; +#76244 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#76245 = ORIENTED_EDGE ( 'NONE', *, *, #31228, .F. ) ; +#76246 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76247 = CIRCLE ( 'NONE', #33020, 9.500000000000099500 ) ; +#76248 = AXIS2_PLACEMENT_3D ( 'NONE', #32862, #1837, #70114 ) ; +#76249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76250 = CARTESIAN_POINT ( 'NONE', ( 10.75702442553464900, 60.16517473503391500, -28.29551658696710000 ) ) ; +#76251 = ADVANCED_FACE ( 'NONE', ( #48375 ), #63010, .F. ) ; +#76252 = ORIENTED_EDGE ( 'NONE', *, *, #47355, .T. ) ; +#76253 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#76254 = ORIENTED_EDGE ( 'NONE', *, *, #66534, .F. ) ; +#76255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76256 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 32.16666666666667900, 0.1341879241256129200 ) ) ; +#76257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76259 = VERTEX_POINT ( 'NONE', #64206 ) ; +#76260 = EDGE_CURVE ( 'NONE', #61679, #11824, #22897, .T. ) ; +#76261 = CIRCLE ( 'NONE', #73744, 10.00000000000009200 ) ; +#76262 = AXIS2_PLACEMENT_3D ( 'NONE', #34231, #21739, #65277 ) ; +#76263 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#76264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76265 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76266 = ADVANCED_FACE ( 'NONE', ( #49209 ), #57921, .T. ) ; +#76267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76268 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#76269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#76272 = AXIS2_PLACEMENT_3D ( 'NONE', #43535, #49781, #37281 ) ; +#76273 = CIRCLE ( 'NONE', #70082, 10.50000000000009600 ) ; +#76274 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#76275 = CARTESIAN_POINT ( 'NONE', ( 3.073491842515437600, 80.22161678501171900, -28.29547179040451300 ) ) ; +#76276 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76277 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76278 = ORIENTED_EDGE ( 'NONE', *, *, #48882, .F. ) ; +#76279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76280 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188004200, 20.06914835874664500, -28.45573375118225100 ) ) ; +#76281 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 69.28967419478925600, -28.59353418718928100 ) ) ; +#76283 = VERTEX_POINT ( 'NONE', #70411 ) ; +#76282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76284 = CARTESIAN_POINT ( 'NONE', ( 4.561944296568767300, 28.61613305479819000, -28.57723854182900400 ) ) ; +#76285 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36279, #73561, #48763, #11552 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01412728837592742500, 0.01489823379111373200 ), + .UNSPECIFIED. ) ; +#76286 = CONICAL_SURFACE ( 'NONE', #21439, 10.50000000000009600, 0.7853981633974518300 ) ; +#76287 = ORIENTED_EDGE ( 'NONE', *, *, #55620, .F. ) ; +#76288 = VECTOR ( 'NONE', #47814, 1000.000000000000000 ) ; +#76290 = EDGE_CURVE ( 'NONE', #57816, #14357, #8395, .T. ) ; +#76289 = ORIENTED_EDGE ( 'NONE', *, *, #32130, .F. ) ; +#76291 = EDGE_CURVE ( 'NONE', #61281, #9591, #74756, .T. ) ; +#76292 = CONICAL_SURFACE ( 'NONE', #17793, 10.50000000000009600, 0.7853981633974500600 ) ; +#76293 = FACE_OUTER_BOUND ( 'NONE', #57908, .T. ) ; +#76294 = ORIENTED_EDGE ( 'NONE', *, *, #75611, .T. ) ; +#76295 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499688900, 89.83662311806170900, -28.37223523914898500 ) ) ; +#76296 = ORIENTED_EDGE ( 'NONE', *, *, #36647, .F. ) ; +#76297 = VERTEX_POINT ( 'NONE', #52161 ) ; +#76298 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 3.666666666666686500, 3.124568980892192800 ) ) ; +#76299 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3993, #66034, #10265, #53770 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278957159400, 0.001249956855167838700 ), + .UNSPECIFIED. ) ; +#76300 = EDGE_CURVE ( 'NONE', #30909, #46732, #60318, .T. ) ; +#76301 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76303 = FACE_OUTER_BOUND ( 'NONE', #10722, .T. ) ; +#76304 = ORIENTED_EDGE ( 'NONE', *, *, #44732, .T. ) ; +#76305 = EDGE_CURVE ( 'NONE', #39371, #28207, #45792, .T. ) ; +#76306 = CIRCLE ( 'NONE', #17508, 10.50000000000009600 ) ; +#76307 = EDGE_CURVE ( 'NONE', #31009, #39538, #31381, .T. ) ; +#76308 = ORIENTED_EDGE ( 'NONE', *, *, #64817, .F. ) ; +#76309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76310 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153423900, 60.80000000000002600, -28.55171188418382000 ) ) ; +#76311 = ORIENTED_EDGE ( 'NONE', *, *, #67391, .T. ) ; +#76313 = ORIENTED_EDGE ( 'NONE', *, *, #25976, .T. ) ; +#76312 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65473, #59170, #34444, #77945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641853934424500E-007, 0.0008759659331882802600 ), + .UNSPECIFIED. ) ; +#76314 = ORIENTED_EDGE ( 'NONE', *, *, #29434, .F. ) ; +#76315 = ORIENTED_EDGE ( 'NONE', *, *, #24055, .T. ) ; +#76316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76317 = ORIENTED_EDGE ( 'NONE', *, *, #60145, .F. ) ; +#76318 = FACE_OUTER_BOUND ( 'NONE', #48956, .T. ) ; +#76319 = AXIS2_PLACEMENT_3D ( 'NONE', #23103, #16841, #60376 ) ; +#76320 = EDGE_LOOP ( 'NONE', ( #20263, #31694, #34433 ) ) ; +#76321 = EDGE_CURVE ( 'NONE', #27806, #19455, #79552, .T. ) ; +#76322 = EDGE_CURVE ( 'NONE', #4660, #77533, #38507, .T. ) ; +#76323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79833, #73578, #23818, #42542 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.751764794219278000E-007, 0.0009376791149930045600 ), + .UNSPECIFIED. ) ; +#76326 = EDGE_CURVE ( 'NONE', #76920, #19665, #16911, .T. ) ; +#76327 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#76328 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#76329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76330 = CARTESIAN_POINT ( 'NONE', ( -16.32624390300882300, 73.19621076493093900, -28.61864990621736000 ) ) ; +#76331 = ORIENTED_EDGE ( 'NONE', *, *, #56073, .T. ) ; +#76332 = AXIS2_PLACEMENT_3D ( 'NONE', #75974, #38681, #1440 ) ; +#76333 = CARTESIAN_POINT ( 'NONE', ( 12.38315603019278300, 84.79999999999959900, -28.70555803803047500 ) ) ; +#76334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76335 = ORIENTED_EDGE ( 'NONE', *, *, #44469, .F. ) ; +#76336 = ADVANCED_FACE ( 'NONE', ( #31868 ), #61070, .T. ) ; +#76337 = FACE_OUTER_BOUND ( 'NONE', #26139, .T. ) ; +#76338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76339 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919937900, 20.22294471194858200, -28.20555803802995200 ) ) ; +#76340 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76341 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000008400, 9.932503002402292200, -28.20555803802994200 ) ) ; +#76342 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#76343 = ADVANCED_FACE ( 'NONE', ( #699 ), #27994, .F. ) ; +#76344 = AXIS2_PLACEMENT_3D ( 'NONE', #16390, #59913, #22642 ) ; +#76345 = PLANE ( 'NONE', #65414 ) ; +#76346 = AXIS2_PLACEMENT_3D ( 'NONE', #20645, #64186, #26907 ) ; +#76347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76348 = AXIS2_PLACEMENT_3D ( 'NONE', #51946, #27262, #58235 ) ; +#76349 = ADVANCED_FACE ( 'NONE', ( #77588 ), #9467, .T. ) ; +#76350 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#76351 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567169600, 30.74660241562189700, -28.20555803802995200 ) ) ; +#76352 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#76353 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 9.500000000000016000, 4.650848422521012700 ) ) ; +#76354 = FACE_OUTER_BOUND ( 'NONE', #41030, .T. ) ; +#76355 = CARTESIAN_POINT ( 'NONE', ( 15.08138858424542400, 9.959305707877289700, -28.70555803803001300 ) ) ; +#76356 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346247200, 81.39409401757578200, -28.39369363572379300 ) ) ; +#76357 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390331600, 81.46283204837320100, -28.48697406221674900 ) ) ; +#76358 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000011700, 65.92347538297963200, -28.70555803803014400 ) ) ; +#76359 = ORIENTED_EDGE ( 'NONE', *, *, #14651, .F. ) ; +#76360 = AXIS2_PLACEMENT_3D ( 'NONE', #62717, #25459, #68952 ) ; +#76361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76362 = EDGE_CURVE ( 'NONE', #1613, #79429, #46408, .T. ) ; +#76363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76364 = EDGE_LOOP ( 'NONE', ( #3025, #56901, #2916, #15524 ) ) ; +#76365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76416, #1883, #45379, #8126 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478978545529900E-007, 0.0002930330874876968300 ), + .UNSPECIFIED. ) ; +#76366 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76367 = ORIENTED_EDGE ( 'NONE', *, *, #40010, .T. ) ; +#76368 = FACE_OUTER_BOUND ( 'NONE', #42682, .T. ) ; +#76369 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914536900, 89.77559325427182600, -28.45987523529581900 ) ) ; +#76370 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76371 = FACE_OUTER_BOUND ( 'NONE', #75413, .T. ) ; +#76372 = ORIENTED_EDGE ( 'NONE', *, *, #57394, .F. ) ; +#76373 = EDGE_CURVE ( 'NONE', #13752, #80776, #2420, .T. ) ; +#76374 = ORIENTED_EDGE ( 'NONE', *, *, #56894, .F. ) ; +#76375 = CONICAL_SURFACE ( 'NONE', #14094, 10.50000000000009600, 0.7853981633974518300 ) ; +#76376 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76377 = CONICAL_SURFACE ( 'NONE', #38188, 10.50000000000009600, 0.7853981633974500600 ) ; +#76378 = AXIS2_PLACEMENT_3D ( 'NONE', #25106, #74885, #62374 ) ; +#76380 = ORIENTED_EDGE ( 'NONE', *, *, #27447, .F. ) ; +#76379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76381 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702740400, 89.37488905616162100, -28.55192314908415000 ) ) ; +#76382 = ORIENTED_EDGE ( 'NONE', *, *, #48294, .T. ) ; +#76383 = CARTESIAN_POINT ( 'NONE', ( -11.65695393454044500, 79.08026449164336200, -28.70555803802997700 ) ) ; +#76384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76385 = CARTESIAN_POINT ( 'NONE', ( -4.319770051899054100, 10.47636006919873000, -28.38670679782144300 ) ) ; +#76386 = CONICAL_SURFACE ( 'NONE', #79467, 10.00000000000009600, 0.7853981633974482800 ) ; +#76387 = ORIENTED_EDGE ( 'NONE', *, *, #22352, .F. ) ; +#76388 = AXIS2_PLACEMENT_3D ( 'NONE', #40595, #46550, #3328 ) ; +#76389 = CIRCLE ( 'NONE', #1263, 10.00000000000009600 ) ; +#76390 = EDGE_LOOP ( 'NONE', ( #36956, #79509, #3106 ) ) ; +#76391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76392 = ORIENTED_EDGE ( 'NONE', *, *, #18598, .F. ) ; +#76393 = ORIENTED_EDGE ( 'NONE', *, *, #12138, .T. ) ; +#76394 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747183700, 28.63131911501876900, -28.51286550264508100 ) ) ; +#76395 = VERTEX_POINT ( 'NONE', #71784 ) ; +#76396 = LINE ( 'NONE', #15396, #62772 ) ; +#76397 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 53.16666666666667900, -2.545304000185620600 ) ) ; +#76398 = ORIENTED_EDGE ( 'NONE', *, *, #48185, .T. ) ; +#76399 = AXIS2_PLACEMENT_3D ( 'NONE', #58023, #14777, #2242 ) ; +#76400 = ORIENTED_EDGE ( 'NONE', *, *, #67282, .F. ) ; +#76401 = CARTESIAN_POINT ( 'NONE', ( -2.198586935028918400, 94.72249899919880500, -28.20555803803014400 ) ) ; +#76403 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76402 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44582, #1105, #57158, #19904 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.008791465289788805800, 0.008828470447789544700 ), + .UNSPECIFIED. ) ; +#76404 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 18.16666666666668900, -3.349151577478988200 ) ) ; +#76405 = ORIENTED_EDGE ( 'NONE', *, *, #62294, .T. ) ; +#76406 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627433900, 33.16464174796073600, -28.53896444442200300 ) ) ; +#76407 = CARTESIAN_POINT ( 'NONE', ( 16.63895135775480200, 29.95782482474361800, -28.57035285187586000 ) ) ; +#76408 = EDGE_CURVE ( 'NONE', #6807, #15206, #33803, .T. ) ; +#76409 = ORIENTED_EDGE ( 'NONE', *, *, #22828, .F. ) ; +#76410 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#76411 = CARTESIAN_POINT ( 'NONE', ( 3.308113725416070800, 18.58874248361071200, -28.53740755999533000 ) ) ; +#76412 = FACE_OUTER_BOUND ( 'NONE', #45594, .T. ) ; +#76413 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 55.50000000000000700, 6.847000845227646500 ) ) ; +#76414 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #48787, #55066, #73863, #36566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392231070700E-007, 0.0003301092607755804700 ), + .UNSPECIFIED. ) ; +#76415 = CARTESIAN_POINT ( 'NONE', ( 16.56486952901391200, 9.217576176120436700, -28.58240548800995000 ) ) ; +#76416 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819073900, 51.65075715145259500, -28.20555803803014100 ) ) ; +#76417 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274713600, 14.05000000000000800, -28.20555803802992800 ) ) ; +#76418 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 90.80000000000001100, -28.70555803802997700 ) ) ; +#76419 = EDGE_CURVE ( 'NONE', #57461, #4799, #44446, .T. ) ; +#76420 = CONICAL_SURFACE ( 'NONE', #3213, 10.50000000000009800, 0.7853981633974500600 ) ; +#76421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76422 = CARTESIAN_POINT ( 'NONE', ( 10.98574357684178400, 51.58004100757849400, -28.24987021275324400 ) ) ; +#76423 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76424 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76425 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 67.94142842854297700, -28.20555803802997700 ) ) ; +#76426 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548965800, 41.44069092601377900, -28.35186440610859600 ) ) ; +#76427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76428 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000079000, 63.65857157145661200, -28.20555803803030800 ) ) ; +#76430 = ORIENTED_EDGE ( 'NONE', *, *, #67997, .T. ) ; +#76429 = CARTESIAN_POINT ( 'NONE', ( -2.093266739736728200, 35.04999999999995500, -28.70555803802995200 ) ) ; +#76431 = ADVANCED_FACE ( 'NONE', ( #29956 ), #9441, .F. ) ; +#76432 = CONICAL_SURFACE ( 'NONE', #38959, 10.50000000000009600, 0.7853981633974518300 ) ; +#76433 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 69.91070809551072800, -28.20555803803030800 ) ) ; +#76434 = AXIS2_PLACEMENT_3D ( 'NONE', #8847, #33902, #33639 ) ; +#76435 = EDGE_CURVE ( 'NONE', #13603, #12788, #26028, .T. ) ; +#76436 = EDGE_CURVE ( 'NONE', #53788, #70191, #11429, .T. ) ; +#76437 = ORIENTED_EDGE ( 'NONE', *, *, #21049, .T. ) ; +#76438 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999577200, 61.78933626866489000, -28.53923937255181200 ) ) ; +#76439 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60411, #16879, #66650, #29427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258831294800, 0.0009376791149929642300 ), + .UNSPECIFIED. ) ; +#76440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76441 = EDGE_CURVE ( 'NONE', #23991, #57451, #75626, .T. ) ; +#76442 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#76443 = CARTESIAN_POINT ( 'NONE', ( 4.512728101709651400, 61.47860083896974700, -28.56001287362850100 ) ) ; +#76444 = VECTOR ( 'NONE', #16123, 1000.000000000000000 ) ; +#76445 = AXIS2_PLACEMENT_3D ( 'NONE', #8134, #39428, #70438 ) ; +#76446 = CIRCLE ( 'NONE', #34578, 10.00000000000009200 ) ; +#76447 = EDGE_LOOP ( 'NONE', ( #56421, #54393, #17217 ) ) ; +#76448 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 59.00000000000001400, -9.205558038030005700 ) ) ; +#76449 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725652400, 22.66464174796073300, -28.53896444442198900 ) ) ; +#76450 = CONICAL_SURFACE ( 'NONE', #18745, 10.00000000000009200, 0.7853981633974447300 ) ; +#76451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#76452 = ORIENTED_EDGE ( 'NONE', *, *, #16775, .F. ) ; +#76453 = VERTEX_POINT ( 'NONE', #66071 ) ; +#76454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76455 = AXIS2_PLACEMENT_3D ( 'NONE', #15230, #33990, #77508 ) ; +#76456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76457 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703200, 25.48096581827319100, -28.69431509262337300 ) ) ; +#76458 = AXIS2_PLACEMENT_3D ( 'NONE', #56350, #37848, #19095 ) ; +#76459 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 69.94924284854670300, -28.20555803803047800 ) ) ; +#76460 = ADVANCED_FACE ( 'NONE', ( #42530 ), #4028, .T. ) ; +#76461 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20324, #57580, #26603, #70076 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003245798681241663800, 0.0007802304471358130000 ), + .UNSPECIFIED. ) ; +#76462 = VECTOR ( 'NONE', #80551, 1000.000000000000000 ) ; +#76463 = EDGE_CURVE ( 'NONE', #50710, #77573, #68765, .T. ) ; +#76465 = FACE_OUTER_BOUND ( 'NONE', #56026, .T. ) ; +#76464 = AXIS2_PLACEMENT_3D ( 'NONE', #14925, #2387, #64731 ) ; +#76466 = ORIENTED_EDGE ( 'NONE', *, *, #44214, .T. ) ; +#76467 = CARTESIAN_POINT ( 'NONE', ( 10.01424819686896200, 70.01994747561590800, -28.24986299608875500 ) ) ; +#76468 = ORIENTED_EDGE ( 'NONE', *, *, #76925, .T. ) ; +#76469 = VERTEX_POINT ( 'NONE', #66594 ) ; +#76470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76471 = VERTEX_POINT ( 'NONE', #29371 ) ; +#76472 = ORIENTED_EDGE ( 'NONE', *, *, #74044, .F. ) ; +#76473 = EDGE_CURVE ( 'NONE', #73924, #16201, #54288, .T. ) ; +#76474 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 24.16666666666667100, 6.794441961969992500 ) ) ; +#76475 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414101700, 29.79999999999999000, -28.45034744217088400 ) ) ; +#76476 = LINE ( 'NONE', #25968, #28855 ) ; +#76477 = AXIS2_PLACEMENT_3D ( 'NONE', #36091, #79606, #42307 ) ; +#76478 = ORIENTED_EDGE ( 'NONE', *, *, #4710, .F. ) ; +#76479 = AXIS2_PLACEMENT_3D ( 'NONE', #43547, #6311, #36 ) ; +#76480 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188002500, 20.06914835874664500, -28.45573375118225100 ) ) ; +#76481 = CONICAL_SURFACE ( 'NONE', #66482, 10.50000000000009600, 0.7853981633974500600 ) ; +#76482 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828120900, 71.13768531620316100, -28.37082013777832800 ) ) ; +#76483 = ORIENTED_EDGE ( 'NONE', *, *, #3284, .F. ) ; +#76484 = FACE_OUTER_BOUND ( 'NONE', #55308, .T. ) ; +#76485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70987, #27498, #2693, #46202 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002483674258830990700, 0.0009376791149929640100 ), + .UNSPECIFIED. ) ; +#76486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76487 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846299000, 60.79999999999998300, -28.55171188418376700 ) ) ; +#76488 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.16749699759769500, -28.20555803802997700 ) ) ; +#76489 = ORIENTED_EDGE ( 'NONE', *, *, #28129, .F. ) ; +#76490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76491 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274713000, 24.23212903577628600, -28.37244029424739400 ) ) ; +#76492 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 67.66666666666668600, -5.205558038030003100 ) ) ; +#76493 = AXIS2_PLACEMENT_3D ( 'NONE', #7009, #75287, #25538 ) ; +#76494 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000482300, 70.52242369685789900, -28.53861367218607000 ) ) ; +#76495 = CIRCLE ( 'NONE', #20398, 10.00000000000009600 ) ; +#76496 = FACE_OUTER_BOUND ( 'NONE', #54083, .T. ) ; +#76497 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76498 = CARTESIAN_POINT ( 'NONE', ( -3.642865939492454500, 42.02620220503759200, -28.70555803802996700 ) ) ; +#76499 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#76500 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#76501 = VERTEX_POINT ( 'NONE', #54062 ) ; +#76502 = CIRCLE ( 'NONE', #35339, 10.50000000000009600 ) ; +#76503 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#76504 = AXIS2_PLACEMENT_3D ( 'NONE', #28328, #3504, #47006 ) ; +#76505 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 29.19949493661175700, -28.70555803802994200 ) ) ; +#76506 = ORIENTED_EDGE ( 'NONE', *, *, #53313, .F. ) ; +#76507 = CARTESIAN_POINT ( 'NONE', ( 2.279102202939203200, 81.50050326225955600, -28.63287226700126100 ) ) ; +#76508 = ADVANCED_FACE ( 'NONE', ( #57145 ), #71760, .T. ) ; +#76509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76510 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000024900, 80.90050506338805300, -28.70555803803014400 ) ) ; +#76511 = CARTESIAN_POINT ( 'NONE', ( -24.94311578411327400, 5.028442107943263300, -19.93543921666511700 ) ) ; +#76512 = CIRCLE ( 'NONE', #22859, 10.50000000000009600 ) ; +#76513 = CONICAL_SURFACE ( 'NONE', #36568, 10.50000000000009600, 0.7853981633974482800 ) ; +#76514 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 30.00000000000001800, -1.205558038030002800 ) ) ; +#76515 = ORIENTED_EDGE ( 'NONE', *, *, #37703, .T. ) ; +#76516 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#76517 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#76518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76519 = CARTESIAN_POINT ( 'NONE', ( 10.20794423950496800, 28.19228657120674700, -28.53891855579987100 ) ) ; +#76520 = VERTEX_POINT ( 'NONE', #60616 ) ; +#76521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76522 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000000000, 68.62623792124938400, -28.70555803802997700 ) ) ; +#76523 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 81.61077422949657000, -28.37255355648634100 ) ) ; +#76525 = ORIENTED_EDGE ( 'NONE', *, *, #39364, .T. ) ; +#76524 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 20.35277818615433200, -28.70555803802998400 ) ) ; +#76526 = ADVANCED_FACE ( 'NONE', ( #24067 ), #38607, .F. ) ; +#76527 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803001300 ) ) ; +#76528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76529 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#76530 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.86203212531317100, -28.38801640354855500 ) ) ; +#76531 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385292600, 28.49322649091135400, -28.30799595738870500 ) ) ; +#76532 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922502800, 51.50962196508494600, -28.29483400905892400 ) ) ; +#76533 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30216, #61481, #80220, #42938 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527065388100E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#76534 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310633400, 61.49769010897038200, -28.61774594594310300 ) ) ; +#76535 = CIRCLE ( 'NONE', #80425, 10.50000000000009600 ) ; +#76536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76537 = ORIENTED_EDGE ( 'NONE', *, *, #65045, .F. ) ; +#76538 = EDGE_CURVE ( 'NONE', #69353, #69213, #39837, .T. ) ; +#76539 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#76540 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853719100, 61.25732391202397800, -28.20555803802997700 ) ) ; +#76541 = ORIENTED_EDGE ( 'NONE', *, *, #30253, .F. ) ; +#76542 = ADVANCED_FACE ( 'NONE', ( #13383 ), #54604, .T. ) ; +#76543 = ORIENTED_EDGE ( 'NONE', *, *, #33334, .F. ) ; +#76544 = VERTEX_POINT ( 'NONE', #54329 ) ; +#76545 = EDGE_CURVE ( 'NONE', #46843, #1875, #59086, .T. ) ; +#76546 = ORIENTED_EDGE ( 'NONE', *, *, #6550, .T. ) ; +#76547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76548 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686917200, 61.58005252438302800, -28.24986299608924900 ) ) ; +#76549 = CIRCLE ( 'NONE', #10975, 9.500000000000099500 ) ; +#76550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76551 = CARTESIAN_POINT ( 'NONE', ( 17.31601142792136400, 20.12324289661777900, -28.43415153258097700 ) ) ; +#76552 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76553 = ORIENTED_EDGE ( 'NONE', *, *, #57498, .T. ) ; +#76554 = CARTESIAN_POINT ( 'NONE', ( -9.892002542654568100, 70.27440177985819500, -28.29986836858017400 ) ) ; +#76555 = EDGE_CURVE ( 'NONE', #44639, #31405, #73705, .T. ) ; +#76556 = ADVANCED_FACE ( 'NONE', ( #55180 ), #36689, .F. ) ; +#76557 = EDGE_CURVE ( 'NONE', #78459, #3142, #25406, .T. ) ; +#76558 = ORIENTED_EDGE ( 'NONE', *, *, #16889, .F. ) ; +#76559 = CIRCLE ( 'NONE', #58605, 10.00000000000009200 ) ; +#76560 = AXIS2_PLACEMENT_3D ( 'NONE', #50962, #13773, #57256 ) ; +#76561 = ORIENTED_EDGE ( 'NONE', *, *, #27620, .F. ) ; +#76562 = CIRCLE ( 'NONE', #24072, 10.00000000000009600 ) ; +#76563 = FACE_OUTER_BOUND ( 'NONE', #8300, .T. ) ; +#76564 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 1.500000000000015300, -4.865812075874393000 ) ) ; +#76565 = AXIS2_PLACEMENT_3D ( 'NONE', #47901, #54170, #4406 ) ; +#76566 = EDGE_CURVE ( 'NONE', #77128, #15440, #22109, .T. ) ; +#76568 = VERTEX_POINT ( 'NONE', #30423 ) ; +#76567 = EDGE_CURVE ( 'NONE', #24894, #69303, #7485, .T. ) ; +#76569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76570 = EDGE_CURVE ( 'NONE', #80471, #77331, #69777, .T. ) ; +#76571 = CARTESIAN_POINT ( 'NONE', ( -10.30811372541606400, 39.58874248361071600, -28.53740755999535500 ) ) ; +#76572 = AXIS2_PLACEMENT_3D ( 'NONE', #49619, #30903, #62177 ) ; +#76573 = CIRCLE ( 'NONE', #4186, 10.00000000000009200 ) ; +#76574 = ORIENTED_EDGE ( 'NONE', *, *, #41174, .F. ) ; +#76575 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76576 = CIRCLE ( 'NONE', #18580, 9.500000000000099500 ) ; +#76577 = ORIENTED_EDGE ( 'NONE', *, *, #35362, .F. ) ; +#76578 = AXIS2_PLACEMENT_3D ( 'NONE', #71111, #33852, #77369 ) ; +#76579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19817, #57078, #26087, #69566 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104804500, 0.0005411754951808448600 ), + .UNSPECIFIED. ) ; +#76580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76581 = ORIENTED_EDGE ( 'NONE', *, *, #75708, .F. ) ; +#76582 = EDGE_CURVE ( 'NONE', #44553, #17172, #53234, .T. ) ; +#76583 = ORIENTED_EDGE ( 'NONE', *, *, #22840, .F. ) ; +#76584 = FACE_OUTER_BOUND ( 'NONE', #57357, .T. ) ; +#76585 = AXIS2_PLACEMENT_3D ( 'NONE', #76867, #39600, #2317 ) ; +#76586 = AXIS2_PLACEMENT_3D ( 'NONE', #35179, #78681, #41379 ) ; +#76587 = ORIENTED_EDGE ( 'NONE', *, *, #9761, .T. ) ; +#76588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76590 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76591 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#76592 = CARTESIAN_POINT ( 'NONE', ( -15.44228214091592800, 22.07425125164786600, -28.70555803803001300 ) ) ; +#76593 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.79999999999999700, -28.20555803802997700 ) ) ; +#76594 = CARTESIAN_POINT ( 'NONE', ( -17.13281128086482500, 18.47187418724322300, -28.37194250757535100 ) ) ; +#76595 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362704000, 74.03471854269753300, -28.66119098264626800 ) ) ; +#76596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76597 = FACE_OUTER_BOUND ( 'NONE', #19301, .T. ) ; +#76598 = CARTESIAN_POINT ( 'NONE', ( 2.680229948100663500, 10.47636006919910800, -28.38670679782165600 ) ) ; +#76599 = VERTEX_POINT ( 'NONE', #73932 ) ; +#76600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76601 = AXIS2_PLACEMENT_3D ( 'NONE', #9777, #53276, #16028 ) ; +#76602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76604 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609703000, 80.13716795162660800, -28.48697406221657100 ) ) ; +#76605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76606 = EDGE_LOOP ( 'NONE', ( #29318, #13247, #73997 ) ) ; +#76607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76608 = ADVANCED_FACE ( 'NONE', ( #5555 ), #18203, .F. ) ; +#76609 = CONICAL_SURFACE ( 'NONE', #73999, 10.00000000000009200, 0.7853981633974447300 ) ; +#76610 = CIRCLE ( 'NONE', #26704, 10.50000000000009200 ) ; +#76611 = AXIS2_PLACEMENT_3D ( 'NONE', #66623, #29406, #72882 ) ; +#76612 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76613 = VERTEX_POINT ( 'NONE', #5914 ) ; +#76614 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 7.333333333333344600, -8.133761268305512700 ) ) ; +#76615 = ORIENTED_EDGE ( 'NONE', *, *, #25846, .T. ) ; +#76616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76617 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 10.00000000000000000, -28.70555803803001300 ) ) ; +#76618 = ORIENTED_EDGE ( 'NONE', *, *, #17230, .F. ) ; +#76619 = ORIENTED_EDGE ( 'NONE', *, *, #14600, .T. ) ; +#76620 = ORIENTED_EDGE ( 'NONE', *, *, #13449, .F. ) ; +#76621 = CARTESIAN_POINT ( 'NONE', ( -9.495236841534568500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#76622 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 70.16749699759769500, -28.20555803802997700 ) ) ; +#76623 = ADVANCED_FACE ( 'NONE', ( #20159 ), #65909, .T. ) ; +#76624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76625 = AXIS2_PLACEMENT_3D ( 'NONE', #77151, #39895, #2605 ) ; +#76626 = EDGE_LOOP ( 'NONE', ( #49833, #49773, #24015 ) ) ; +#76627 = ORIENTED_EDGE ( 'NONE', *, *, #26996, .F. ) ; +#76628 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76629 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53249, #22257, #41015, #3736 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351388594800E-007, 0.0004318366892330703600 ), + .UNSPECIFIED. ) ; +#76630 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76631 = EDGE_CURVE ( 'NONE', #52604, #5658, #1633, .T. ) ; +#76632 = CARTESIAN_POINT ( 'NONE', ( -4.745461813558210700, 28.59617548195244300, -28.64146967277531900 ) ) ; +#76633 = CIRCLE ( 'NONE', #7478, 10.00000000000009200 ) ; +#76634 = AXIS2_PLACEMENT_3D ( 'NONE', #33457, #33191, #70711 ) ; +#76635 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76636 = ORIENTED_EDGE ( 'NONE', *, *, #14957, .F. ) ; +#76637 = ADVANCED_FACE ( 'NONE', ( #40579 ), #16263, .F. ) ; +#76638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #20908, #8629, #14913, #58426 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082060941500E-007, 0.001076191670834628100 ), + .UNSPECIFIED. ) ; +#76639 = ORIENTED_EDGE ( 'NONE', *, *, #65071, .F. ) ; +#76640 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#76641 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658261500, 49.65151454780964000, -28.67627428870436300 ) ) ; +#76642 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53413, #16431, #35215, #78728 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0002670038068533322800 ), + .UNSPECIFIED. ) ; +#76643 = FACE_OUTER_BOUND ( 'NONE', #40786, .T. ) ; +#76644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76645 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510334500, 9.940690926013795400, -28.35186440610855000 ) ) ; +#76646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76647 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999962300, 31.46823913367205300, -28.70555803802996700 ) ) ; +#76648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76649 = ORIENTED_EDGE ( 'NONE', *, *, #34737, .F. ) ; +#76650 = ADVANCED_FACE ( 'NONE', ( #49300 ), #63959, .F. ) ; +#76651 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80504, #43213, #18479, #62016 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143709140800, 0.0006599881756734670100 ), + .UNSPECIFIED. ) ; +#76652 = EDGE_CURVE ( 'NONE', #15131, #35143, #10925, .T. ) ; +#76653 = CONICAL_SURFACE ( 'NONE', #13027, 10.00000000000009600, 0.7853981633974447300 ) ; +#76654 = ORIENTED_EDGE ( 'NONE', *, *, #25004, .F. ) ; +#76655 = EDGE_CURVE ( 'NONE', #50920, #6766, #51238, .T. ) ; +#76656 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76657 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 80.13716795162658000, -28.48697406221667800 ) ) ; +#76658 = ADVANCED_FACE ( 'NONE', ( #3582 ), #14302, .F. ) ; +#76659 = FACE_OUTER_BOUND ( 'NONE', #36479, .T. ) ; +#76660 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 51.00000000000000700, -1.205558038030002800 ) ) ; +#76661 = EDGE_CURVE ( 'NONE', #5765, #7904, #77228, .T. ) ; +#76662 = EDGE_LOOP ( 'NONE', ( #4726, #39937, #51260 ) ) ; +#76663 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033300, 71.46283204837304500, -28.48697406221691300 ) ) ; +#76664 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992900, 16.00000000000001400, -1.205558038030005300 ) ) ; +#76665 = EDGE_CURVE ( 'NONE', #75015, #34478, #34765, .T. ) ; +#76666 = AXIS2_PLACEMENT_3D ( 'NONE', #45350, #1592, #26652 ) ; +#76667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76668 = CONICAL_SURFACE ( 'NONE', #28134, 10.50000000000009600, 0.7853981633974518300 ) ; +#76669 = ORIENTED_EDGE ( 'NONE', *, *, #22544, .T. ) ; +#76670 = EDGE_CURVE ( 'NONE', #57505, #10918, #62795, .T. ) ; +#76671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76672 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 53.33333333333335000, -6.705558038030005700 ) ) ; +#76673 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999984100, -28.20555803803014400 ) ) ; +#76674 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76675 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.70555803803030800 ) ) ; +#76676 = EDGE_LOOP ( 'NONE', ( #10013, #18434, #51406, #31540, #39973 ) ) ; +#76677 = AXIS2_PLACEMENT_3D ( 'NONE', #29488, #41936, #66709 ) ; +#76678 = EDGE_CURVE ( 'NONE', #49270, #51554, #48281, .T. ) ; +#76679 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24691, #68192, #6189, #49655 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460910906631300E-007, 0.0008482521192571691000 ), + .UNSPECIFIED. ) ; +#76680 = CARTESIAN_POINT ( 'NONE', ( -16.10512553856427300, 29.55333467158442300, -28.65803483468293000 ) ) ; +#76681 = EDGE_CURVE ( 'NONE', #50291, #72050, #67845, .T. ) ; +#76682 = CARTESIAN_POINT ( 'NONE', ( -10.08198180548964200, 49.65930907398620800, -28.35186440610858900 ) ) ; +#76683 = EDGE_CURVE ( 'NONE', #33308, #51411, #30859, .T. ) ; +#76684 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143987600, 56.44146991525236200, -28.52629299565627400 ) ) ; +#76685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76686 = CARTESIAN_POINT ( 'NONE', ( -2.680229948100650200, 20.97636006919909900, -28.38670679782166300 ) ) ; +#76687 = CIRCLE ( 'NONE', #69167, 10.50000000000009600 ) ; +#76688 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#76689 = CYLINDRICAL_SURFACE ( 'NONE', #78773, 10.00000000000000200 ) ; +#76690 = ORIENTED_EDGE ( 'NONE', *, *, #74441, .F. ) ; +#76691 = ORIENTED_EDGE ( 'NONE', *, *, #12076, .F. ) ; +#76692 = AXIS2_PLACEMENT_3D ( 'NONE', #6781, #50264, #13061 ) ; +#76693 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999990200, 15.22261628933270000, -28.70555803802992800 ) ) ; +#76694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76695 = ORIENTED_EDGE ( 'NONE', *, *, #8149, .T. ) ; +#76696 = ORIENTED_EDGE ( 'NONE', *, *, #44246, .T. ) ; +#76697 = EDGE_LOOP ( 'NONE', ( #52172, #38372, #54874, #45751 ) ) ; +#76698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76699 = ORIENTED_EDGE ( 'NONE', *, *, #55439, .T. ) ; +#76700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76701 = ORIENTED_EDGE ( 'NONE', *, *, #19632, .T. ) ; +#76702 = ORIENTED_EDGE ( 'NONE', *, *, #39959, .T. ) ; +#76703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76704 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224832400, 71.50962196508503200, -28.29483400905890600 ) ) ; +#76705 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032800, 20.44069092601377900, -28.35186440610856800 ) ) ; +#76706 = EDGE_CURVE ( 'NONE', #67056, #72149, #33858, .T. ) ; +#76707 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999932100, 38.63176086632793000, -28.70555803802995200 ) ) ; +#76708 = AXIS2_PLACEMENT_3D ( 'NONE', #6601, #74890, #43841 ) ; +#76709 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660897100, 70.13716795162599700, -28.48697406221726800 ) ) ; +#76710 = AXIS2_PLACEMENT_3D ( 'NONE', #37142, #43395, #74436 ) ; +#76711 = ORIENTED_EDGE ( 'NONE', *, *, #36838, .T. ) ; +#76712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76713 = CARTESIAN_POINT ( 'NONE', ( 2.255140518769849200E-013, 16.62623792124918900, -28.70555803802992800 ) ) ; +#76714 = FACE_OUTER_BOUND ( 'NONE', #56038, .T. ) ; +#76715 = EDGE_LOOP ( 'NONE', ( #45699, #13282, #65664, #32478, #37256 ) ) ; +#76716 = ORIENTED_EDGE ( 'NONE', *, *, #9137, .T. ) ; +#76717 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 56.83333333333335000, 6.794441961969992500 ) ) ; +#76718 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 39.10252595950259300, -28.26641963845861800 ) ) ; +#76719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76720 = EDGE_LOOP ( 'NONE', ( #13798, #26851, #13990, #38058 ) ) ; +#76721 = CONICAL_SURFACE ( 'NONE', #48968, 10.00000000000009200, 0.7853981633974447300 ) ; +#76722 = CARTESIAN_POINT ( 'NONE', ( 17.90477814820119600, 90.08258585630862600, -28.27509349209150700 ) ) ; +#76723 = ADVANCED_FACE ( 'NONE', ( #80494 ), #60062, .T. ) ; +#76724 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76725 = AXIS2_PLACEMENT_3D ( 'NONE', #61025, #79776, #30295 ) ; +#76726 = ORIENTED_EDGE ( 'NONE', *, *, #4113, .T. ) ; +#76727 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#76728 = EDGE_LOOP ( 'NONE', ( #77419, #60839, #14889 ) ) ; +#76729 = AXIS2_PLACEMENT_3D ( 'NONE', #47196, #16235, #3696 ) ; +#76730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76731 = CIRCLE ( 'NONE', #26026, 9.500000000000099500 ) ; +#76732 = ORIENTED_EDGE ( 'NONE', *, *, #18700, .F. ) ; +#76733 = ADVANCED_FACE ( 'NONE', ( #12359 ), #63297, .T. ) ; +#76734 = EDGE_CURVE ( 'NONE', #59285, #39296, #19385, .T. ) ; +#76735 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76736 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #43590, #6352 ) ; +#76737 = ORIENTED_EDGE ( 'NONE', *, *, #48037, .F. ) ; +#76738 = CARTESIAN_POINT ( 'NONE', ( 3.023159676506411900, 28.58087956867520400, -28.30223257055572400 ) ) ; +#76739 = ORIENTED_EDGE ( 'NONE', *, *, #43650, .F. ) ; +#76740 = ADVANCED_FACE ( 'NONE', ( #45388 ), #10402, .F. ) ; +#76741 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 22.00000000000001800, -9.205558038030005700 ) ) ; +#76742 = AXIS2_PLACEMENT_3D ( 'NONE', #59324, #22067, #65600 ) ; +#76743 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344323300, 17.92298334620759800, -28.20555803802994200 ) ) ; +#76744 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432854400, 39.35339758437810100, -28.20555803802995200 ) ) ; +#76745 = ADVANCED_FACE ( 'NONE', ( #47346 ), #58074, .T. ) ; +#76746 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60205, #41405, #66451, #29228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402478981410255200E-007, 0.0002930330874878019900 ), + .UNSPECIFIED. ) ; +#76747 = AXIS2_PLACEMENT_3D ( 'NONE', #7505, #57303, #20054 ) ; +#76748 = CONICAL_SURFACE ( 'NONE', #32736, 10.00000000000009200, 0.7853981633974447300 ) ; +#76749 = CIRCLE ( 'NONE', #17165, 10.50000000000009600 ) ; +#76750 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ; +#76751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76752 = ORIENTED_EDGE ( 'NONE', *, *, #40305, .F. ) ; +#76753 = CARTESIAN_POINT ( 'NONE', ( -17.37141821671362500, 60.16749699759768800, -28.25056166218020700 ) ) ; +#76754 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79363, #10819, #4811, #48314 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193584768400, 0.0006651184466334694900 ), + .UNSPECIFIED. ) ; +#76755 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000011000, 47.44142842854307000, -28.20555803802996700 ) ) ; +#76756 = CARTESIAN_POINT ( 'NONE', ( 10.36049707220281000, 30.93250300240228900, -28.25438406275899100 ) ) ; +#76757 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 65.50000000000001400, 4.650848422521012700 ) ) ; +#76758 = CIRCLE ( 'NONE', #22243, 10.50000000000009400 ) ; +#76759 = VERTEX_POINT ( 'NONE', #76040 ) ; +#76760 = FACE_OUTER_BOUND ( 'NONE', #69973, .T. ) ; +#76761 = EDGE_LOOP ( 'NONE', ( #11558, #10734, #7296, #4452 ) ) ; +#76762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76763 = ORIENTED_EDGE ( 'NONE', *, *, #68580, .T. ) ; +#76764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76765 = EDGE_CURVE ( 'NONE', #53446, #39296, #76562, .T. ) ; +#76766 = ORIENTED_EDGE ( 'NONE', *, *, #10440, .T. ) ; +#76767 = CONICAL_SURFACE ( 'NONE', #16314, 10.50000000000009600, 0.7853981633974500600 ) ; +#76768 = CARTESIAN_POINT ( 'NONE', ( -11.37531397908069400, 8.372468488016760800, -28.60279861539359900 ) ) ; +#76770 = EDGE_CURVE ( 'NONE', #36658, #63375, #28944, .T. ) ; +#76769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #49518, #12318, #31081, #74595 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727632380101600E-007, 0.0007800579090277937000 ), + .UNSPECIFIED. ) ; +#76771 = VERTEX_POINT ( 'NONE', #44997 ) ; +#76772 = ORIENTED_EDGE ( 'NONE', *, *, #8988, .T. ) ; +#76773 = EDGE_LOOP ( 'NONE', ( #13900, #78767, #76716, #17188 ) ) ; +#76774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76775 = ORIENTED_EDGE ( 'NONE', *, *, #33393, .T. ) ; +#76776 = CARTESIAN_POINT ( 'NONE', ( 3.040268958506427300, 20.37561462481245700, -28.30309985153374100 ) ) ; +#76777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76778 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660941900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#76779 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548966100, 41.44069092601379400, -28.35186440610858600 ) ) ; +#76780 = EDGE_LOOP ( 'NONE', ( #79019, #54246, #34344 ) ) ; +#76781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76782 = EDGE_CURVE ( 'NONE', #39868, #47477, #62004, .T. ) ; +#76783 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23118, #78890, #47818, #66622 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001074688468210950800, 0.001517199873936107400 ), + .UNSPECIFIED. ) ; +#76784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76785 = ORIENTED_EDGE ( 'NONE', *, *, #34480, .F. ) ; +#76786 = CARTESIAN_POINT ( 'NONE', ( -23.02772599325357600, 1.972274006746262100, -24.94722842225378700 ) ) ; +#76787 = CIRCLE ( 'NONE', #24043, 10.50000000000009600 ) ; +#76788 = CARTESIAN_POINT ( 'NONE', ( 1.660254037844495700, 75.79999999999998300, -28.20555803802997700 ) ) ; +#76789 = ORIENTED_EDGE ( 'NONE', *, *, #12505, .F. ) ; +#76790 = EDGE_CURVE ( 'NONE', #32519, #40874, #43464, .T. ) ; +#76791 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 27.83333333333334300, -2.545304000185615800 ) ) ; +#76793 = EDGE_CURVE ( 'NONE', #77331, #61214, #74636, .T. ) ; +#76792 = EDGE_LOOP ( 'NONE', ( #44920, #558, #31672, #52988 ) ) ; +#76794 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914530900, 81.82440674572717400, -28.45987523529583300 ) ) ; +#76795 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510359800, 18.15930907398620400, -28.35186440610855700 ) ) ; +#76796 = ORIENTED_EDGE ( 'NONE', *, *, #71094, .T. ) ; +#76797 = ORIENTED_EDGE ( 'NONE', *, *, #15185, .T. ) ; +#76798 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567176700, 20.24660241562181900, -28.20555803802994200 ) ) ; +#76799 = VERTEX_POINT ( 'NONE', #14310 ) ; +#76800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76801 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000000000, 88.62623792124939800, -28.70555803802997700 ) ) ; +#76802 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#76803 = FACE_OUTER_BOUND ( 'NONE', #4251, .T. ) ; +#76804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76805 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#76806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76807 = AXIS2_PLACEMENT_3D ( 'NONE', #15246, #34001, #21520 ) ; +#76808 = CARTESIAN_POINT ( 'NONE', ( -11.92857142857143600, 31.02858243452105600, -28.70555803802996700 ) ) ; +#76809 = EDGE_CURVE ( 'NONE', #76951, #9301, #4925, .T. ) ; +#76810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76811 = EDGE_CURVE ( 'NONE', #45798, #9070, #71246, .T. ) ; +#76812 = EDGE_CURVE ( 'NONE', #20926, #24408, #56779, .T. ) ; +#76813 = ORIENTED_EDGE ( 'NONE', *, *, #54409, .T. ) ; +#76814 = CARTESIAN_POINT ( 'NONE', ( -11.19152310112212600, 18.57332680091206700, -28.37233769390152800 ) ) ; +#76815 = CARTESIAN_POINT ( 'NONE', ( -1.694833884776380900, 8.955677477148126900, -28.65273083505965700 ) ) ; +#76816 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76817 = AXIS2_PLACEMENT_3D ( 'NONE', #6058, #49266, #12328 ) ; +#76818 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 22.65857157145701000, -28.20555803802995200 ) ) ; +#76819 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280411800, 43.65857157145702400, -28.37229765499285300 ) ) ; +#76820 = CIRCLE ( 'NONE', #38947, 10.50000000000009600 ) ; +#76821 = EDGE_LOOP ( 'NONE', ( #41354, #19115, #43377 ) ) ; +#76822 = ORIENTED_EDGE ( 'NONE', *, *, #18474, .T. ) ; +#76823 = CARTESIAN_POINT ( 'NONE', ( 4.319770051899062000, 17.62363993080123900, -28.38670679782144600 ) ) ; +#76824 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473788300, 38.73827450271181800, -28.47230003642365000 ) ) ; +#76825 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 18.69949493661175300, -28.70555803802992800 ) ) ; +#76826 = AXIS2_PLACEMENT_3D ( 'NONE', #3209, #9463, #40479 ) ; +#76827 = CARTESIAN_POINT ( 'NONE', ( -3.575024471762824800, 92.18241614681682000, -28.70555803803002000 ) ) ; +#76828 = AXIS2_PLACEMENT_3D ( 'NONE', #54765, #17533, #61059 ) ; +#76829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#76830 = AXIS2_PLACEMENT_3D ( 'NONE', #37670, #56455, #50171 ) ; +#76831 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76832 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#76833 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13729, #26242, #32458, #75971 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885675059848600E-007, 0.0007987728781052867300 ), + .UNSPECIFIED. ) ; +#76834 = LINE ( 'NONE', #72842, #10666 ) ; +#76835 = CIRCLE ( 'NONE', #66612, 10.00000000000009400 ) ; +#76836 = ORIENTED_EDGE ( 'NONE', *, *, #46979, .F. ) ; +#76837 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76838 = ADVANCED_FACE ( 'NONE', ( #26958 ), #23052, .T. ) ; +#76839 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, -0.6666666666666625200, 1.294441961969997200 ) ) ; +#76840 = AXIS2_PLACEMENT_3D ( 'NONE', #28592, #72097, #34826 ) ; +#76841 = ORIENTED_EDGE ( 'NONE', *, *, #17451, .T. ) ; +#76842 = EDGE_CURVE ( 'NONE', #43518, #65209, #42304, .T. ) ; +#76843 = CARTESIAN_POINT ( 'NONE', ( -17.24374441227740100, 80.61266709210548200, -28.45058834003056300 ) ) ; +#76844 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846542400, 19.60079448659599400, -28.70555803802994200 ) ) ; +#76845 = ADVANCED_FACE ( 'NONE', ( #56116 ), #70709, .T. ) ; +#76846 = CONICAL_SURFACE ( 'NONE', #61823, 10.50000000000009600, 0.7853981633974500600 ) ; +#76847 = ORIENTED_EDGE ( 'NONE', *, *, #74105, .T. ) ; +#76848 = CARTESIAN_POINT ( 'NONE', ( 4.036255108180783100, 79.94924284854681700, -28.20555803803030800 ) ) ; +#76849 = FACE_OUTER_BOUND ( 'NONE', #12025, .T. ) ; +#76850 = EDGE_LOOP ( 'NONE', ( #36815, #77008, #18780 ) ) ; +#76851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76852 = EDGE_CURVE ( 'NONE', #70456, #31022, #27911, .T. ) ; +#76853 = CONICAL_SURFACE ( 'NONE', #25123, 10.00000000000009400, 0.7853981633974447300 ) ; +#76854 = EDGE_LOOP ( 'NONE', ( #48671, #43506, #48711, #29090 ) ) ; +#76855 = ORIENTED_EDGE ( 'NONE', *, *, #70240, .F. ) ; +#76856 = EDGE_LOOP ( 'NONE', ( #44689, #47323, #18494, #61441 ) ) ; +#76857 = ORIENTED_EDGE ( 'NONE', *, *, #79709, .T. ) ; +#76858 = VERTEX_POINT ( 'NONE', #64912 ) ; +#76859 = VERTEX_POINT ( 'NONE', #27639 ) ; +#76860 = VERTEX_POINT ( 'NONE', #71132 ) ; +#76861 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #52746, #77775, #59279, #22036 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278957563800, 0.001517194977238233800 ), + .UNSPECIFIED. ) ; +#76862 = PLANE ( 'NONE', #45441 ) ; +#76863 = CARTESIAN_POINT ( 'NONE', ( 0.6431502629261061100, 9.797591630864086900, -28.70350937758197000 ) ) ; +#76864 = ADVANCED_FACE ( 'NONE', ( #39575 ), #37599, .F. ) ; +#76865 = CARTESIAN_POINT ( 'NONE', ( -11.80141306497121300, 94.72249899919930300, -28.20555803802997700 ) ) ; +#76866 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999956300, 71.43250300240197200, -28.20555803803047800 ) ) ; +#76867 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#76868 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 42.83333333333333600, -12.20555803803000600 ) ) ; +#76869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76870 = CIRCLE ( 'NONE', #17722, 10.50000000000009600 ) ; +#76871 = CARTESIAN_POINT ( 'NONE', ( -16.02443482362704700, 77.56528145730244700, -28.66119098264626800 ) ) ; +#76872 = AXIS2_PLACEMENT_3D ( 'NONE', #76352, #39069, #1802 ) ; +#76874 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .T. ) ; +#76873 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76876 = VERTEX_POINT ( 'NONE', #2837 ) ; +#76877 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#76878 = ORIENTED_EDGE ( 'NONE', *, *, #18892, .F. ) ; +#76879 = EDGE_LOOP ( 'NONE', ( #18597, #43302, #54689, #61806 ) ) ; +#76880 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25092, #62625, #75127, #37845 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001985300408025958800, 0.0006251342085520325900 ), + .UNSPECIFIED. ) ; +#76881 = ORIENTED_EDGE ( 'NONE', *, *, #52343, .F. ) ; +#76882 = ORIENTED_EDGE ( 'NONE', *, *, #38886, .F. ) ; +#76883 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76884 = CARTESIAN_POINT ( 'NONE', ( -11.17814613023136200, 93.78469023269130400, -28.46719432058929300 ) ) ; +#76885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76886 = CARTESIAN_POINT ( 'NONE', ( -9.680229948100942400, 17.62363993080124700, -28.38670679782144300 ) ) ; +#76887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76888 = CONICAL_SURFACE ( 'NONE', #67097, 10.00000000000009200, 0.7853981633974447300 ) ; +#76889 = ORIENTED_EDGE ( 'NONE', *, *, #60604, .T. ) ; +#76890 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285710900, 47.42318720225497200, -28.70555803802996700 ) ) ; +#76891 = AXIS2_PLACEMENT_3D ( 'NONE', #72336, #35080, #78591 ) ; +#76892 = VERTEX_POINT ( 'NONE', #40118 ) ; +#76893 = CARTESIAN_POINT ( 'NONE', ( 2.785741443456171600, 61.52472935029916800, -28.39317435246108800 ) ) ; +#76894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76895 = CARTESIAN_POINT ( 'NONE', ( 3.878587485500374100, 89.83662311806155300, -28.37223523914908100 ) ) ; +#76896 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.70555803802996700 ) ) ; +#76897 = CARTESIAN_POINT ( 'NONE', ( 17.14726587473790800, 17.73827450271187100, -28.47230003642364700 ) ) ; +#76898 = EDGE_CURVE ( 'NONE', #1793, #9750, #13427, .T. ) ; +#76899 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 5.166666666666690900, 6.794441961969992500 ) ) ; +#76900 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76901 = CONICAL_SURFACE ( 'NONE', #51932, 10.00000000000009200, 0.7853981633974447300 ) ; +#76902 = CARTESIAN_POINT ( 'NONE', ( -3.530520547801695200, 91.59999999999999400, -28.70555803802999500 ) ) ; +#76903 = VERTEX_POINT ( 'NONE', #9079 ) ; +#76904 = ORIENTED_EDGE ( 'NONE', *, *, #59508, .F. ) ; +#76905 = ORIENTED_EDGE ( 'NONE', *, *, #14911, .T. ) ; +#76906 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76907 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#76908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76909 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474900, 81.43945992495534400, -28.34042301926880800 ) ) ; +#76910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76912 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 74.37738371066727400, -28.70555803802997700 ) ) ; +#76913 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507522100, 29.20543520232828500, -28.70555803802994200 ) ) ; +#76914 = EDGE_CURVE ( 'NONE', #44364, #53013, #6487, .T. ) ; +#76915 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571364000, 20.52858243452107300, -28.70555803802995200 ) ) ; +#76917 = EDGE_CURVE ( 'NONE', #48803, #69272, #41529, .T. ) ; +#76916 = FACE_OUTER_BOUND ( 'NONE', #64520, .T. ) ; +#76918 = ORIENTED_EDGE ( 'NONE', *, *, #45302, .F. ) ; +#76919 = CARTESIAN_POINT ( 'NONE', ( 1.038367061114153900E-014, 44.44999999999999600, -18.70555803802999900 ) ) ; +#76920 = VERTEX_POINT ( 'NONE', #71398 ) ; +#76921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76923 = AXIS2_PLACEMENT_3D ( 'NONE', #68594, #31346, #74853 ) ; +#76924 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76925 = EDGE_CURVE ( 'NONE', #79077, #28672, #79723, .T. ) ; +#76926 = EDGE_CURVE ( 'NONE', #72280, #27304, #54162, .T. ) ; +#76927 = CARTESIAN_POINT ( 'NONE', ( -17.14726587474190100, 31.36172549728280500, -28.47230003642277300 ) ) ; +#76928 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47042, #59600, #78364, #41083, #3810, #47302, #10087, #53595, #16350, #59876, #22593, #66130, #28900, #72392, #35128, #78643, #41349, #4087, #47575, #10354, #53864, #16608, #60140, #22861, #66390, #29171, #72646, #35402, #78912, #41613, #4352, #47847, #10626, #54117, #16882, #60414, #23141, #66652, #29429, #72912, #35649, #79176, #41872, #4622, #48110, #10893, #54388, #17144, #60677, #23397, #66918, #29681, #73185, #35907, #79426, #42133, #4884, #48380, #11166, #54662, #17413, #60940, #23683, #67183, #29963, #73444, #36175, #79687, #42398, #5163, #48642, #11435, #54927, #17688, #61216, #23943, #67452, #30218, #73711, #36420, #79968, #42668, #5431, #48915, #11703, #55187, #17943, #61482, #24211, #67714, #30480, #73981, #36695, #80223 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.563658610346375400E-017, 8.736882784678844300E-005, 0.0001747376556935612500, 0.0003494753113871047600, 0.0006989506227741918600, 0.001397901245548366100, 0.002096851868322540000, 0.002795802491096714500, 0.004193703736645062700, 0.005591604982193411700, 0.006290555604967585300, 0.006989506227741759000, 0.008387407473290104500, 0.009086358096064280800, 0.009785308718838453500, 0.01118320996438679900, 0.01258111120993514800, 0.01397901245548349500, 0.01537691370103184400, 0.01677481494658019500, 0.01747376556935437500, 0.01817271619212854800, 0.01957061743767689700, 0.02096851868322524900, 0.02236641992877359800, 0.02376432117432195100, 0.02446327179709613000, 0.02516222241987030700, 0.02656012366541867300, 0.02795802491096703600, 0.02935592615651540200, 0.03075382740206376500, 0.03354962989316048700, 0.03424858051593467800, 0.03494753113870886100, 0.03634543238425722000, 0.03774333362980558000, 0.03914123487535393900, 0.04053913612090229900, 0.04193703736645065800, 0.04263598798922483400, 0.04333493861199901000, 0.04403388923477319400, 0.04438336454616027100, 0.04455810220185382100, 0.04464547102970059500, 0.04473283985754736300 ), + .UNSPECIFIED. ) ; +#76929 = ADVANCED_FACE ( 'NONE', ( #24996 ), #35691, .F. ) ; +#76930 = FACE_OUTER_BOUND ( 'NONE', #23270, .T. ) ; +#76932 = ORIENTED_EDGE ( 'NONE', *, *, #53597, .T. ) ; +#76931 = EDGE_CURVE ( 'NONE', #49172, #73683, #8413, .T. ) ; +#76933 = VERTEX_POINT ( 'NONE', #78201 ) ; +#76934 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.03751622186536700, -28.32723995587601400 ) ) ; +#76935 = CIRCLE ( 'NONE', #67306, 10.00000000000009200 ) ; +#76936 = ORIENTED_EDGE ( 'NONE', *, *, #29521, .F. ) ; +#76937 = VERTEX_POINT ( 'NONE', #15385 ) ; +#76939 = ORIENTED_EDGE ( 'NONE', *, *, #58564, .T. ) ; +#76938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76940 = ORIENTED_EDGE ( 'NONE', *, *, #12035, .T. ) ; +#76941 = ADVANCED_FACE ( 'NONE', ( #4540 ), #50243, .T. ) ; +#76942 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 48.83333333333334300, 0.1341879241256075400 ) ) ; +#76943 = AXIS2_PLACEMENT_3D ( 'NONE', #7165, #31947, #75457 ) ; +#76944 = CARTESIAN_POINT ( 'NONE', ( -16.62941195799386700, 50.47864823602810700, -28.57191971780058300 ) ) ; +#76945 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 13.83333333333335500, 0.9380355014189731800 ) ) ; +#76946 = EDGE_LOOP ( 'NONE', ( #42544, #78299, #61269 ) ) ; +#76947 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#76948 = CONICAL_SURFACE ( 'NONE', #22362, 10.00000000000009200, 0.7853981633974447300 ) ; +#76949 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180778700, 51.65075715145311400, -28.20555803802997700 ) ) ; +#76950 = ORIENTED_EDGE ( 'NONE', *, *, #44129, .T. ) ; +#76951 = VERTEX_POINT ( 'NONE', #53431 ) ; +#76952 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000007500, 39.16749699759768800, -28.20555803802995200 ) ) ; +#76953 = VERTEX_POINT ( 'NONE', #16189 ) ; +#76954 = VERTEX_POINT ( 'NONE', #59713 ) ; +#76955 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 51.16666666666668600, 1.741883078712356500 ) ) ; +#76956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76957 = ORIENTED_EDGE ( 'NONE', *, *, #55516, .F. ) ; +#76958 = ORIENTED_EDGE ( 'NONE', *, *, #63503, .T. ) ; +#76959 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46215, #58759, #65050, #27784 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473285885586200E-007, 0.0007303759720927572100 ), + .UNSPECIFIED. ) ; +#76960 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524300, 81.43945992495534400, -28.34042301926881200 ) ) ; +#76961 = CIRCLE ( 'NONE', #53512, 10.00000000000009200 ) ; +#76962 = AXIS2_PLACEMENT_3D ( 'NONE', #33228, #20728, #76730 ) ; +#76963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51341, #20393, #26657, #70142, #32880, #76401 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 1.436393986538261500E-017, 0.001587068747398667800, 0.003174137494797321200 ), + .UNSPECIFIED. ) ; +#76964 = ORIENTED_EDGE ( 'NONE', *, *, #15723, .F. ) ; +#76965 = EDGE_CURVE ( 'NONE', #51112, #30223, #2556, .T. ) ; +#76966 = CARTESIAN_POINT ( 'NONE', ( 4.283176507099356400, 28.56267502090560500, -28.41043597897493800 ) ) ; +#76967 = CARTESIAN_POINT ( 'NONE', ( -12.53318012365767400, 65.79999999999999700, -28.37307693585060900 ) ) ; +#76968 = ADVANCED_FACE ( 'NONE', ( #52185 ), #616, .T. ) ; +#76969 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.16749699759769500, -28.20555803802997700 ) ) ; +#76970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76971 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#76972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76973 = FACE_OUTER_BOUND ( 'NONE', #63729, .T. ) ; +#76974 = ORIENTED_EDGE ( 'NONE', *, *, #76782, .T. ) ; +#76975 = EDGE_CURVE ( 'NONE', #31691, #42265, #65311, .T. ) ; +#76976 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22043, #78341, #22575, #66102 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927619800 ), + .UNSPECIFIED. ) ; +#76977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#76978 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #347, #68896 ) ; +#76979 = AXIS2_PLACEMENT_3D ( 'NONE', #75579, #57104, #69331 ) ; +#76980 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 33.49926474563211100, -28.70555803802996700 ) ) ; +#76981 = CARTESIAN_POINT ( 'NONE', ( 2.495236841534574300, 30.10079448659600100, -28.70555803802995200 ) ) ; +#76982 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76983 = CARTESIAN_POINT ( 'NONE', ( 5.473815440142127300, 50.54999999999999000, -28.54256287284167800 ) ) ; +#76984 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 90.16749699759768100, -28.20555803802997700 ) ) ; +#76985 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999995600, 78.62623792124938400, -28.70555803802997700 ) ) ; +#76986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76987 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76988 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507568100, 38.57379779496243800, -28.70555803802995200 ) ) ; +#76989 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252837800, 9.968680884981202100, -28.51286550264501000 ) ) ; +#76990 = AXIS2_PLACEMENT_3D ( 'NONE', #20258, #26529, #57513 ) ; +#76991 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 54.66666666666668600, -8.133761268305512700 ) ) ; +#76992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76993 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 81.43250300240228500, -28.20555803802997700 ) ) ; +#76994 = VERTEX_POINT ( 'NONE', #3928 ) ; +#76995 = EDGE_LOOP ( 'NONE', ( #39285, #14406, #75467, #28619 ) ) ; +#76996 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000010700, 8.799999999999828400, -28.70555803803009500 ) ) ; +#76997 = ORIENTED_EDGE ( 'NONE', *, *, #31655, .T. ) ; +#76998 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#76999 = CARTESIAN_POINT ( 'NONE', ( -2.760105492671868000, 71.93585231025950600, -28.38420446581293900 ) ) ; +#77000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77001 = AXIS2_PLACEMENT_3D ( 'NONE', #27051, #70537, #39529 ) ; +#77002 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 48.12623792124938400, -28.70555803802996700 ) ) ; +#77003 = CARTESIAN_POINT ( 'NONE', ( 3.500479402801553300, 80.69966441803865100, -28.70555803803030800 ) ) ; +#77004 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510359800, 18.15930907398620400, -28.35186440610855700 ) ) ; +#77005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68835, #25338, #6815, #50298 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698234737700E-007, 0.0008724363063899891000 ), + .UNSPECIFIED. ) ; +#77006 = CIRCLE ( 'NONE', #25232, 9.500000000000097700 ) ; +#77007 = VERTEX_POINT ( 'NONE', #72492 ) ; +#77008 = ORIENTED_EDGE ( 'NONE', *, *, #75154, .T. ) ; +#77009 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853733700, 61.25732391202370800, -28.20555803803030800 ) ) ; +#77010 = ORIENTED_EDGE ( 'NONE', *, *, #73851, .T. ) ; +#77011 = CIRCLE ( 'NONE', #34424, 8.000000000000000000 ) ; +#77012 = ORIENTED_EDGE ( 'NONE', *, *, #62411, .T. ) ; +#77013 = ORIENTED_EDGE ( 'NONE', *, *, #28734, .T. ) ; +#77014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77015 = VERTEX_POINT ( 'NONE', #29015 ) ; +#77016 = ORIENTED_EDGE ( 'NONE', *, *, #55780, .F. ) ; +#77017 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 19.83333333333334300, 6.794441961969992500 ) ) ; +#77018 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#77019 = ORIENTED_EDGE ( 'NONE', *, *, #56658, .F. ) ; +#77020 = CIRCLE ( 'NONE', #77077, 10.00000000000009200 ) ; +#77021 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 43.65857157145702400, -28.20555803802997700 ) ) ; +#77022 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77023 = ADVANCED_FACE ( 'NONE', ( #17191 ), #48293, .F. ) ; +#77024 = CIRCLE ( 'NONE', #51975, 10.00000000000009600 ) ; +#77025 = ORIENTED_EDGE ( 'NONE', *, *, #26589, .F. ) ; +#77026 = ORIENTED_EDGE ( 'NONE', *, *, #62662, .T. ) ; +#77027 = EDGE_CURVE ( 'NONE', #59962, #41981, #50764, .T. ) ; +#77028 = ORIENTED_EDGE ( 'NONE', *, *, #18090, .T. ) ; +#77029 = VERTEX_POINT ( 'NONE', #4199 ) ; +#77030 = VERTEX_POINT ( 'NONE', #66497 ) ; +#77031 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77032 = EDGE_LOOP ( 'NONE', ( #34857, #70535, #70044, #20369 ) ) ; +#77033 = CIRCLE ( 'NONE', #41469, 10.50000000000009200 ) ; +#77034 = ADVANCED_FACE ( 'NONE', ( #19123 ), #15235, .F. ) ; +#77035 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#77036 = EDGE_CURVE ( 'NONE', #12637, #2092, #31792, .T. ) ; +#77037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77038 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77039 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655678500, 28.42298334620757000, -28.20555803802994500 ) ) ; +#77040 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 63.33333333333333600, -8.133761268305512700 ) ) ; +#77041 = ORIENTED_EDGE ( 'NONE', *, *, #55453, .T. ) ; +#77042 = EDGE_CURVE ( 'NONE', #35860, #49213, #72693, .T. ) ; +#77043 = AXIS2_PLACEMENT_3D ( 'NONE', #8144, #70181, #51653 ) ; +#77044 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#77045 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77046 = FACE_OUTER_BOUND ( 'NONE', #35979, .T. ) ; +#77048 = ORIENTED_EDGE ( 'NONE', *, *, #74795, .T. ) ; +#77047 = ADVANCED_FACE ( 'NONE', ( #66836 ), #29881, .F. ) ; +#77049 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#77050 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56637, #69159, #75424, #38128 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674736349731600E-007, 0.0009376786059871894100 ), + .UNSPECIFIED. ) ; +#77051 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 18.24722181384548500, -28.70555803803013400 ) ) ; +#77052 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715851400, 55.79999999999976300, -28.70525300642641800 ) ) ; +#77053 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#77054 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 51.56248377813449200, -28.32723995587591800 ) ) ; +#77055 = AXIS2_PLACEMENT_3D ( 'NONE', #27875, #71368, #34104 ) ; +#77056 = EDGE_CURVE ( 'NONE', #39702, #57642, #36330, .T. ) ; +#77057 = EDGE_CURVE ( 'NONE', #55877, #28207, #21111, .T. ) ; +#77058 = ADVANCED_FACE ( 'NONE', ( #62940 ), #60985, .T. ) ; +#77059 = CARTESIAN_POINT ( 'NONE', ( -3.722577835444267800, 61.87833896172674000, -28.53892303408234800 ) ) ; +#77061 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77060 = AXIS2_PLACEMENT_3D ( 'NONE', #7596, #51091, #13895 ) ; +#77062 = CARTESIAN_POINT ( 'NONE', ( -18.26454230036461000, 3.470915399270911200, -26.30484836595933700 ) ) ; +#77063 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77064 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 25.66666666666667500, 1.294441961969997200 ) ) ; +#77065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77066 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77067 = ORIENTED_EDGE ( 'NONE', *, *, #44402, .T. ) ; +#77068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77069 = CARTESIAN_POINT ( 'NONE', ( 2.997978530266237400, 28.78907435382948800, -28.25433648786264100 ) ) ; +#77070 = EDGE_LOOP ( 'NONE', ( #59646, #4807, #26599, #38817 ) ) ; +#77071 = CARTESIAN_POINT ( 'NONE', ( 3.959729345560840700, 39.22438272935921300, -28.30310183417008200 ) ) ; +#77072 = EDGE_CURVE ( 'NONE', #41110, #10390, #77514, .T. ) ; +#77073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77074 = ADVANCED_FACE ( 'NONE', ( #13306 ), #11351, .T. ) ; +#77075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77076 = CARTESIAN_POINT ( 'NONE', ( -9.733473218116456500, 18.20564881207761900, -28.41114655922296700 ) ) ; +#77077 = AXIS2_PLACEMENT_3D ( 'NONE', #30717, #74252, #36940 ) ; +#77078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77079 = AXIS2_PLACEMENT_3D ( 'NONE', #40860, #3584, #47083 ) ; +#77080 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725212400, 14.04999999999952800, -28.20555803803025800 ) ) ; +#77081 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965628600, 17.92298334620783600, -28.20555803802992800 ) ) ; +#77082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77083 = CARTESIAN_POINT ( 'NONE', ( -15.16180434334073500, 9.919097828329633200, -28.70457623972511000 ) ) ; +#77084 = CIRCLE ( 'NONE', #42363, 10.50000000000009600 ) ; +#77085 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77086 = ORIENTED_EDGE ( 'NONE', *, *, #9575, .T. ) ; +#77087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77089 = ORIENTED_EDGE ( 'NONE', *, *, #71687, .F. ) ; +#77090 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#77091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77092 = CONICAL_SURFACE ( 'NONE', #1517, 10.50000000000009600, 0.7853981633974500600 ) ; +#77093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77094 = ORIENTED_EDGE ( 'NONE', *, *, #35688, .F. ) ; +#77095 = AXIS2_PLACEMENT_3D ( 'NONE', #13191, #19420, #67835 ) ; +#77097 = EDGE_LOOP ( 'NONE', ( #35542, #72684, #67490 ) ) ; +#77096 = CARTESIAN_POINT ( 'NONE', ( 1.616843969806990500, 76.79999999999962800, -28.70555803802997700 ) ) ; +#77098 = ORIENTED_EDGE ( 'NONE', *, *, #21963, .F. ) ; +#77099 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 61.65075715145215400, -28.20555803803047800 ) ) ; +#77100 = VERTEX_POINT ( 'NONE', #30066 ) ; +#77101 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349246600, 50.20543520232829600, -28.70555803802996700 ) ) ; +#77102 = ORIENTED_EDGE ( 'NONE', *, *, #29418, .T. ) ; +#77103 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77104 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#77105 = CIRCLE ( 'NONE', #73403, 10.00000000000009200 ) ; +#77106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #41976, #22960, #10990, #54495 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183107900, 0.005168056621191927600 ), + .UNSPECIFIED. ) ; +#77108 = ORIENTED_EDGE ( 'NONE', *, *, #67742, .F. ) ; +#77109 = AXIS2_PLACEMENT_3D ( 'NONE', #72353, #41311, #28867 ) ; +#77110 = FACE_OUTER_BOUND ( 'NONE', #73763, .T. ) ; +#77111 = ORIENTED_EDGE ( 'NONE', *, *, #2676, .T. ) ; +#77112 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46894, #3386, #15917, #59446 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633005785048800E-007, 0.0004089065559709823100 ), + .UNSPECIFIED. ) ; +#77113 = VERTEX_POINT ( 'NONE', #79811 ) ; +#77114 = VERTEX_POINT ( 'NONE', #5269 ) ; +#77115 = ORIENTED_EDGE ( 'NONE', *, *, #77392, .T. ) ; +#77116 = FACE_OUTER_BOUND ( 'NONE', #80226, .T. ) ; +#77117 = EDGE_LOOP ( 'NONE', ( #29255, #8054, #52244, #8805 ) ) ; +#77118 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71284, #27791, #9238, #52771 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.090972904625265100E-007, 0.0005865296644889207200 ), + .UNSPECIFIED. ) ; +#77119 = CIRCLE ( 'NONE', #21126, 10.00000000000009400 ) ; +#77120 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 69.33333333333334300, -5.205558038030008400 ) ) ; +#77121 = AXIS2_PLACEMENT_3D ( 'NONE', #73789, #43019, #30555 ) ; +#77122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77124 = EDGE_CURVE ( 'NONE', #6616, #29005, #21888, .T. ) ; +#77125 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55356, #67889, #5885, #49348 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203477708621700E-007, 0.0008990233139250881700 ), + .UNSPECIFIED. ) ; +#77126 = AXIS2_PLACEMENT_3D ( 'NONE', #72913, #60416, #35650 ) ; +#77127 = CONICAL_SURFACE ( 'NONE', #75795, 10.50000000000009800, 0.7853981633974500600 ) ; +#77128 = VERTEX_POINT ( 'NONE', #73557 ) ; +#77129 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 79.28967419478925600, -28.59353418718928100 ) ) ; +#77130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77132 = ADVANCED_FACE ( 'NONE', ( #33732 ), #59014, .F. ) ; +#77133 = CARTESIAN_POINT ( 'NONE', ( 10.91801819451024800, 18.15930907398604800, -28.35186440610868200 ) ) ; +#77134 = CARTESIAN_POINT ( 'NONE', ( -15.02626848327745200, 85.71754128061482400, -28.70555803803001600 ) ) ; +#77135 = CARTESIAN_POINT ( 'NONE', ( 9.760105492671803200, 69.66414768974053100, -28.38420446581287500 ) ) ; +#77136 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 40.66666666666667900, 8.320721403598824400 ) ) ; +#77137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77138 = CARTESIAN_POINT ( 'NONE', ( 11.65695393454054400, 89.08026449164296400, -28.70555803803030800 ) ) ; +#77139 = EDGE_CURVE ( 'NONE', #53164, #20134, #7398, .T. ) ; +#77140 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344312700, 20.67701665379241400, -28.20555803802994200 ) ) ; +#77141 = ADVANCED_FACE ( 'NONE', ( #46328 ), #25945, .T. ) ; +#77142 = EDGE_CURVE ( 'NONE', #47643, #44569, #42445, .T. ) ; +#77143 = EDGE_LOOP ( 'NONE', ( #16655, #54304, #1342 ) ) ; +#77144 = CARTESIAN_POINT ( 'NONE', ( 17.26470821603529900, 41.78298664431370200, -28.44647976475484100 ) ) ; +#77145 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #34150, #58895, #46625, #9381 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674214828118200E-007, 0.0007606607323827744600 ), + .UNSPECIFIED. ) ; +#77146 = CARTESIAN_POINT ( 'NONE', ( -9.219797288042476800, 17.00972971738996600, -28.70555803802992000 ) ) ; +#77147 = PLANE ( 'NONE', #30185 ) ; +#77149 = ORIENTED_EDGE ( 'NONE', *, *, #15799, .F. ) ; +#77148 = CARTESIAN_POINT ( 'NONE', ( -9.808476898877845700, 41.02667319908791700, -28.37233769390156400 ) ) ; +#77150 = ADVANCED_FACE ( 'NONE', ( #75554 ), #57075, .F. ) ; +#77151 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#77152 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67319, #79564, #30090, #73574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052633005785048800E-007, 0.0004089065559709823100 ), + .UNSPECIFIED. ) ; +#77153 = EDGE_CURVE ( 'NONE', #77113, #2762, #73747, .T. ) ; +#77154 = ADVANCED_FACE ( 'NONE', ( #64906 ), #23996, .T. ) ; +#77155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77157 = EDGE_CURVE ( 'NONE', #9881, #63819, #73625, .T. ) ; +#77158 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77159 = FACE_OUTER_BOUND ( 'NONE', #43151, .T. ) ; +#77160 = ORIENTED_EDGE ( 'NONE', *, *, #57255, .T. ) ; +#77161 = AXIS2_PLACEMENT_3D ( 'NONE', #73299, #5011, #48487 ) ; +#77162 = FACE_OUTER_BOUND ( 'NONE', #64922, .T. ) ; +#77163 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346208400, 80.20590598242328900, -28.39369363572415100 ) ) ; +#77164 = ORIENTED_EDGE ( 'NONE', *, *, #76307, .T. ) ; +#77165 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 3.000000000000002700, -9.205558038030005700 ) ) ; +#77166 = CARTESIAN_POINT ( 'NONE', ( -16.76916930534303400, 60.65007990305426200, -28.43638873268705000 ) ) ; +#77167 = VERTEX_POINT ( 'NONE', #12352 ) ; +#77168 = CONICAL_SURFACE ( 'NONE', #22556, 10.00000000000009200, 0.7853981633974447300 ) ; +#77169 = ORIENTED_EDGE ( 'NONE', *, *, #55009, .T. ) ; +#77170 = ORIENTED_EDGE ( 'NONE', *, *, #60468, .F. ) ; +#77171 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339057800, 90.13716795162659400, -28.48697406221667400 ) ) ; +#77172 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77173 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999990700, 18.69949493661175700, -28.70555803802992800 ) ) ; +#77174 = ORIENTED_EDGE ( 'NONE', *, *, #71094, .F. ) ; +#77175 = AXIS2_PLACEMENT_3D ( 'NONE', #75717, #38436, #1195 ) ; +#77176 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77177 = CIRCLE ( 'NONE', #48818, 9.500000000000099500 ) ; +#77178 = EDGE_CURVE ( 'NONE', #77629, #74066, #9365, .T. ) ; +#77179 = EDGE_CURVE ( 'NONE', #11933, #54555, #40512, .T. ) ; +#77180 = CARTESIAN_POINT ( 'NONE', ( -10.65361668731967100, 8.297294629097113000, -28.56190306242184800 ) ) ; +#77181 = EDGE_CURVE ( 'NONE', #24948, #2695, #44365, .T. ) ; +#77182 = CARTESIAN_POINT ( 'NONE', ( -2.769169305343111900, 60.65007990305431900, -28.43638873268713500 ) ) ; +#77183 = CARTESIAN_POINT ( 'NONE', ( -10.77884208558770000, 9.935236322205881300, -28.30315276798563700 ) ) ; +#77184 = ORIENTED_EDGE ( 'NONE', *, *, #5796, .F. ) ; +#77185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77186 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77187 = CONICAL_SURFACE ( 'NONE', #32141, 10.50000000000009600, 0.7853981633974500600 ) ; +#77188 = AXIS2_PLACEMENT_3D ( 'NONE', #45769, #8526, #52028 ) ; +#77189 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567158500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#77190 = ORIENTED_EDGE ( 'NONE', *, *, #34161, .F. ) ; +#77191 = ORIENTED_EDGE ( 'NONE', *, *, #50893, .T. ) ; +#77192 = CARTESIAN_POINT ( 'NONE', ( 3.081981805489669500, 41.44069092601377900, -28.35186440610859600 ) ) ; +#77193 = EDGE_LOOP ( 'NONE', ( #12604, #33703, #1995, #78925, #3903 ) ) ; +#77194 = ORIENTED_EDGE ( 'NONE', *, *, #62256, .T. ) ; +#77195 = CARTESIAN_POINT ( 'NONE', ( -9.071428571428612000, 20.52858243452102400, -28.70555803802995200 ) ) ; +#77196 = EDGE_CURVE ( 'NONE', #54853, #71559, #59271, .T. ) ; +#77197 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655690400, 49.42298334620756600, -28.20555803802997400 ) ) ; +#77198 = FACE_OUTER_BOUND ( 'NONE', #7151, .T. ) ; +#77199 = AXIS2_PLACEMENT_3D ( 'NONE', #68488, #74747, #43173 ) ; +#77200 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 61.68929190448938000, -28.20555803802997700 ) ) ; +#77201 = ORIENTED_EDGE ( 'NONE', *, *, #27843, .F. ) ; +#77202 = CARTESIAN_POINT ( 'NONE', ( -17.24297557446558200, 90.16517473503392900, -28.29551658696701800 ) ) ; +#77203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77204 = ORIENTED_EDGE ( 'NONE', *, *, #43877, .F. ) ; +#77205 = ORIENTED_EDGE ( 'NONE', *, *, #53599, .T. ) ; +#77206 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 12.33333333333335500, 8.320721403598817300 ) ) ; +#77207 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42838, #18098, #36841, #80385 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629354285709600E-007, 0.0007670609591624613300 ), + .UNSPECIFIED. ) ; +#77208 = CIRCLE ( 'NONE', #28994, 10.00000000000009600 ) ; +#77209 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252843200, 18.13131911501858100, -28.51286550264478600 ) ) ; +#77210 = CARTESIAN_POINT ( 'NONE', ( -9.042760264135443600, 75.79999999999999700, -28.53819074160683700 ) ) ; +#77211 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76203, #8186, #51689, #14475 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386349010100, 0.0008131256040091040600 ), + .UNSPECIFIED. ) ; +#77212 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 46.66666666666667900, -3.705558038030004400 ) ) ; +#77213 = AXIS2_PLACEMENT_3D ( 'NONE', #45870, #8612, #52124 ) ; +#77214 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77215 = CARTESIAN_POINT ( 'NONE', ( 7.491253024753336500E-015, 12.39610994602600500, -28.37519436813177600 ) ) ; +#77216 = CARTESIAN_POINT ( 'NONE', ( -1.466819876342303900, 55.79999999999974800, -28.37307693585074700 ) ) ; +#77217 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 11.66666666666667500, -5.205558038030003100 ) ) ; +#77218 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55268, #11779, #74061, #36765 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001881556978777019300, 0.0006311001363622174100 ), + .UNSPECIFIED. ) ; +#77219 = AXIS2_PLACEMENT_3D ( 'NONE', #8160, #51663, #14455 ) ; +#77220 = LINE ( 'NONE', #22272, #42152 ) ; +#77221 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77222 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534571100, 39.99920551340398600, -28.70555803802995200 ) ) ; +#77223 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 49.00000000000002100, -1.205558038030002800 ) ) ; +#77224 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000433400, 16.62623792124944100, -28.70555803803025800 ) ) ; +#77225 = AXIS2_PLACEMENT_3D ( 'NONE', #78599, #4045, #47262 ) ; +#77226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77227 = ORIENTED_EDGE ( 'NONE', *, *, #1803, .T. ) ; +#77228 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25214, #62475, #37687, #434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002929605760849894300, 0.0007596411030278643700 ), + .UNSPECIFIED. ) ; +#77229 = VERTEX_POINT ( 'NONE', #18600 ) ; +#77230 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77231 = VERTEX_POINT ( 'NONE', #337 ) ; +#77232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77233 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146265600, 61.25732391202370800, -28.20555803803030800 ) ) ; +#77234 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#77235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77236 = FACE_OUTER_BOUND ( 'NONE', #17926, .T. ) ; +#77237 = ORIENTED_EDGE ( 'NONE', *, *, #7331, .T. ) ; +#77238 = CONICAL_SURFACE ( 'NONE', #19550, 10.00000000000009200, 0.7853981633974447300 ) ; +#77239 = AXIS2_PLACEMENT_3D ( 'NONE', #12049, #74067, #49260 ) ; +#77240 = VERTEX_POINT ( 'NONE', #74627 ) ; +#77241 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77242 = CARTESIAN_POINT ( 'NONE', ( 8.851846210996310300, 65.79999999999999700, -28.37148172714570600 ) ) ; +#77243 = FACE_OUTER_BOUND ( 'NONE', #75354, .T. ) ; +#77244 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825478400, 90.16054007504463600, -28.34042301926890100 ) ) ; +#77245 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 52.97376207875060300, -28.70555803802997700 ) ) ; +#77246 = EDGE_LOOP ( 'NONE', ( #44746, #56161, #44787 ) ) ; +#77247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77248 = EDGE_LOOP ( 'NONE', ( #38502, #24745, #41221, #54916 ) ) ; +#77249 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#77251 = ORIENTED_EDGE ( 'NONE', *, *, #67298, .T. ) ; +#77250 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#77252 = ADVANCED_FACE ( 'NONE', ( #27919 ), #69702, .F. ) ; +#77253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56262, #6502, #50254, #13052 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.468766082061362300E-007, 0.001119323292485816400 ), + .UNSPECIFIED. ) ; +#77255 = ADVANCED_FACE ( 'NONE', ( #71678 ), #36606, .F. ) ; +#77256 = CONICAL_SURFACE ( 'NONE', #9120, 10.00000000000009200, 0.7853981633974415100 ) ; +#77257 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#77258 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782499500, 51.43945992495499600, -28.34042301926905000 ) ) ; +#77259 = VERTEX_POINT ( 'NONE', #25407 ) ; +#77260 = CIRCLE ( 'NONE', #28494, 10.00000000000009600 ) ; +#77261 = EDGE_CURVE ( 'NONE', #67155, #38513, #53154, .T. ) ; +#77262 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 52.50000000000001400, 4.650848422521016300 ) ) ; +#77263 = VERTEX_POINT ( 'NONE', #75155 ) ; +#77264 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999998800, 20.35277818615433200, -28.70555803802998400 ) ) ; +#77266 = EDGE_CURVE ( 'NONE', #31088, #50435, #22035, .T. ) ; +#77265 = ORIENTED_EDGE ( 'NONE', *, *, #57872, .F. ) ; +#77267 = ORIENTED_EDGE ( 'NONE', *, *, #71096, .F. ) ; +#77268 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77269 = ORIENTED_EDGE ( 'NONE', *, *, #66347, .T. ) ; +#77270 = FACE_OUTER_BOUND ( 'NONE', #64358, .T. ) ; +#77271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77272 = EDGE_CURVE ( 'NONE', #31509, #66911, #7407, .T. ) ; +#77273 = ADVANCED_FACE ( 'NONE', ( #38526 ), #34683, .F. ) ; +#77274 = EDGE_CURVE ( 'NONE', #42498, #12566, #44760, .T. ) ; +#77275 = ORIENTED_EDGE ( 'NONE', *, *, #16867, .T. ) ; +#77276 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#77277 = EDGE_CURVE ( 'NONE', #9849, #2326, #20091, .T. ) ; +#77278 = EDGE_LOOP ( 'NONE', ( #32170, #56353, #57171, #20596 ) ) ; +#77279 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 46.50000000000001400, -7.061964498581025000 ) ) ; +#77280 = EDGE_CURVE ( 'NONE', #21828, #29074, #30385, .T. ) ; +#77281 = ORIENTED_EDGE ( 'NONE', *, *, #34531, .T. ) ; +#77282 = FACE_OUTER_BOUND ( 'NONE', #1942, .T. ) ; +#77283 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 71.65075715145216900, -28.20555803803047800 ) ) ; +#77284 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#77285 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 17.66666666666667900, -8.133761268305512700 ) ) ; +#77286 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 70.34510448120795400, -28.37193179497697300 ) ) ; +#77287 = AXIS2_PLACEMENT_3D ( 'NONE', #43376, #6130, #49608 ) ; +#77288 = EDGE_CURVE ( 'NONE', #8942, #53406, #15891, .T. ) ; +#77289 = EDGE_CURVE ( 'NONE', #79782, #16570, #51154, .T. ) ; +#77290 = EDGE_CURVE ( 'NONE', #75704, #29231, #5480, .T. ) ; +#77291 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999949400, 20.96823913367206800, -28.70555803802995200 ) ) ; +#77292 = AXIS2_PLACEMENT_3D ( 'NONE', #27672, #2600, #71160 ) ; +#77293 = CONICAL_SURFACE ( 'NONE', #52307, 10.50000000000009600, 0.7853981633974500600 ) ; +#77294 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77295 = ORIENTED_EDGE ( 'NONE', *, *, #18296, .F. ) ; +#77296 = AXIS2_PLACEMENT_3D ( 'NONE', #25416, #68901, #31657 ) ; +#77297 = AXIS2_PLACEMENT_3D ( 'NONE', #69851, #14645, #39363 ) ; +#77298 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287000, 24.23212903577621100, -28.37244029424743300 ) ) ; +#77299 = ORIENTED_EDGE ( 'NONE', *, *, #76208, .T. ) ; +#77300 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146283400, 80.34267608797603100, -28.20555803802997700 ) ) ; +#77301 = CARTESIAN_POINT ( 'NONE', ( -15.85159581707824800, 71.66410593583272300, -28.68054222049971400 ) ) ; +#77302 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#77303 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 61.16666666666665700, 6.794441961969992500 ) ) ; +#77304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46439, #2953, #65294, #28028 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.484988143495895000E-016, 0.001179148174663073800 ), + .UNSPECIFIED. ) ; +#77305 = CONICAL_SURFACE ( 'NONE', #53701, 10.50000000000009600, 0.7853981633974482800 ) ; +#77306 = EDGE_LOOP ( 'NONE', ( #10076, #51429, #66032 ) ) ; +#77307 = VECTOR ( 'NONE', #12567, 1000.000000000000000 ) ; +#77308 = CARTESIAN_POINT ( 'NONE', ( 3.757024425534570600, 60.16517473503391500, -28.29551658696707200 ) ) ; +#77309 = ORIENTED_EDGE ( 'NONE', *, *, #11761, .F. ) ; +#77310 = CARTESIAN_POINT ( 'NONE', ( -3.469479452198195500, 91.59999999999999400, -28.70555803803007700 ) ) ; +#77311 = ORIENTED_EDGE ( 'NONE', *, *, #13551, .F. ) ; +#77312 = CIRCLE ( 'NONE', #66766, 10.50000000000009600 ) ; +#77313 = FACE_OUTER_BOUND ( 'NONE', #77829, .T. ) ; +#77314 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 61.25489551879203300, -28.37193179497697000 ) ) ; +#77315 = ORIENTED_EDGE ( 'NONE', *, *, #17256, .T. ) ; +#77316 = CARTESIAN_POINT ( 'NONE', ( 4.107997457345199200, 70.27440177985802400, -28.29986836858028500 ) ) ; +#77317 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#77318 = VERTEX_POINT ( 'NONE', #42453 ) ; +#77319 = CARTESIAN_POINT ( 'NONE', ( 10.46947945219830500, 91.59999999999999400, -28.70555803802999500 ) ) ; +#77320 = ORIENTED_EDGE ( 'NONE', *, *, #67758, .T. ) ; +#77321 = AXIS2_PLACEMENT_3D ( 'NONE', #25742, #31979, #75223 ) ; +#77322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77323 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#77324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77009, #65072, #71291, #34033 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838143734680500E-007, 0.0004559721418120913800 ), + .UNSPECIFIED. ) ; +#77325 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999971600, 79.81066373133491300, -28.53923937255183000 ) ) ; +#77326 = ADVANCED_FACE ( 'NONE', ( #55105 ), #32708, .F. ) ; +#77327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77329 = FACE_OUTER_BOUND ( 'NONE', #36643, .T. ) ; +#77328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77330 = CARTESIAN_POINT ( 'NONE', ( -15.94782201824421900, 9.526088990877886100, -28.66053837059378400 ) ) ; +#77331 = VERTEX_POINT ( 'NONE', #24003 ) ; +#77332 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#77334 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 23.50000000000001100, -4.865812075874393000 ) ) ; +#77333 = FACE_OUTER_BOUND ( 'NONE', #11014, .T. ) ; +#77335 = VERTEX_POINT ( 'NONE', #67494 ) ; +#77336 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.418457393421038000, -28.68863412692833800 ) ) ; +#77337 = EDGE_CURVE ( 'NONE', #71952, #77263, #1418, .T. ) ; +#77338 = ORIENTED_EDGE ( 'NONE', *, *, #26662, .F. ) ; +#77340 = ORIENTED_EDGE ( 'NONE', *, *, #29548, .T. ) ; +#77339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51902, #76686, #58191, #20962 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.705370968959021200E-018, 0.001246264537621139400 ), + .UNSPECIFIED. ) ; +#77341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77342 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#77343 = ORIENTED_EDGE ( 'NONE', *, *, #55331, .F. ) ; +#77344 = AXIS2_PLACEMENT_3D ( 'NONE', #11798, #48740, #55281 ) ; +#77345 = ORIENTED_EDGE ( 'NONE', *, *, #54007, .F. ) ; +#77346 = EDGE_LOOP ( 'NONE', ( #5155, #21657, #16116 ) ) ; +#77347 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807122900, 76.79999999999994000, -28.70555803802997700 ) ) ; +#77348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77349 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919795100, 18.37705528805047100, -28.20555803803042500 ) ) ; +#77350 = ADVANCED_FACE ( 'NONE', ( #3506 ), #80419, .T. ) ; +#77351 = CIRCLE ( 'NONE', #18374, 10.00000000000009600 ) ; +#77352 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77353 = CARTESIAN_POINT ( 'NONE', ( 2.963744891819206200, 59.94924284854685900, -28.20555803802997700 ) ) ; +#77354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30623, #18084, #55328, #74133 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392194607000E-007, 0.0003301092607755730400 ), + .UNSPECIFIED. ) ; +#77357 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472528700, 24.54999999999997600, -28.20555803802994200 ) ) ; +#77359 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000044600, 70.16749699759752400, -28.20555803803030800 ) ) ; +#77360 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#77361 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77362 = VERTEX_POINT ( 'NONE', #17996 ) ; +#77363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77364 = AXIS2_PLACEMENT_3D ( 'NONE', #470, #43962, #6735 ) ; +#77365 = CARTESIAN_POINT ( 'NONE', ( -17.90477814820187800, 51.51741414369119800, -28.27509349209130500 ) ) ; +#77366 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#77367 = ORIENTED_EDGE ( 'NONE', *, *, #53872, .F. ) ; +#77368 = CIRCLE ( 'NONE', #29941, 10.00000000000009200 ) ; +#77369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77370 = CARTESIAN_POINT ( 'NONE', ( -16.96374489181987100, 71.65075715145280800, -28.20555803802997700 ) ) ; +#77371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77372 = CARTESIAN_POINT ( 'NONE', ( 15.85864231129048300, 35.05000000000000400, -28.50266868976636300 ) ) ; +#77373 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 70.37705528805136600, -28.20555803802997700 ) ) ; +#77374 = AXIS2_PLACEMENT_3D ( 'NONE', #69175, #50649, #31930 ) ; +#77375 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484958100, 89.28967419478928500, -28.59353418718927700 ) ) ; +#77376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77377 = ADVANCED_FACE ( 'NONE', ( #49227 ), #47278, .T. ) ; +#77378 = EDGE_CURVE ( 'NONE', #53468, #3997, #67753, .T. ) ; +#77379 = FACE_OUTER_BOUND ( 'NONE', #38746, .T. ) ; +#77380 = CARTESIAN_POINT ( 'NONE', ( -9.963744891818961900, 79.94924284854708700, -28.20555803802997700 ) ) ; +#77381 = ORIENTED_EDGE ( 'NONE', *, *, #61134, .T. ) ; +#77382 = ORIENTED_EDGE ( 'NONE', *, *, #71933, .T. ) ; +#77383 = CIRCLE ( 'NONE', #52546, 10.00000000000009200 ) ; +#77384 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 67.16666666666667100, 0.9380355014189834000 ) ) ; +#77385 = VERTEX_POINT ( 'NONE', #12013 ) ; +#77386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11585, #42826, #80110, #49061 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885675103734400E-007, 0.0007987728781052868400 ), + .UNSPECIFIED. ) ; +#77388 = CARTESIAN_POINT ( 'NONE', ( -3.704177143141671900, 9.519451428761131600, -28.52576311647842300 ) ) ; +#77389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77390 = LINE ( 'NONE', #1085, #496 ) ; +#77391 = CIRCLE ( 'NONE', #41346, 10.00000000000009400 ) ; +#77392 = EDGE_CURVE ( 'NONE', #14429, #51144, #53278, .T. ) ; +#77393 = EDGE_LOOP ( 'NONE', ( #67348, #1309, #9644, #7601 ) ) ; +#77394 = EDGE_CURVE ( 'NONE', #66290, #72435, #38791, .T. ) ; +#77395 = CIRCLE ( 'NONE', #54709, 10.00000000000009200 ) ; +#77396 = ORIENTED_EDGE ( 'NONE', *, *, #10703, .F. ) ; +#77397 = EDGE_LOOP ( 'NONE', ( #10146, #68224, #28779 ) ) ; +#77398 = AXIS2_PLACEMENT_3D ( 'NONE', #46903, #3668, #47163 ) ; +#77399 = EDGE_CURVE ( 'NONE', #49684, #16023, #24378, .T. ) ; +#77400 = EDGE_CURVE ( 'NONE', #61679, #32442, #67767, .T. ) ; +#77401 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77402 = EDGE_CURVE ( 'NONE', #49730, #5512, #9908, .T. ) ; +#77403 = CIRCLE ( 'NONE', #8167, 9.500000000000097700 ) ; +#77404 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#77405 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 38.50000000000000000, -9.258116921287651700 ) ) ; +#77406 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280398600, 53.65857157145644900, -28.37229765499320400 ) ) ; +#77407 = CONICAL_SURFACE ( 'NONE', #47610, 10.50000000000009600, 0.7853981633974518300 ) ; +#77408 = EDGE_LOOP ( 'NONE', ( #7590, #22552, #79281, #7943, #61479 ) ) ; +#77409 = AXIS2_PLACEMENT_3D ( 'NONE', #2448, #8701, #39726 ) ; +#77410 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#77411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77412 = ORIENTED_EDGE ( 'NONE', *, *, #56902, .T. ) ; +#77413 = ORIENTED_EDGE ( 'NONE', *, *, #77288, .F. ) ; +#77414 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ; +#77415 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77416 = ORIENTED_EDGE ( 'NONE', *, *, #37092, .F. ) ; +#77417 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 11.93454006867179600, -28.70555803802997700 ) ) ; +#77418 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77419 = ORIENTED_EDGE ( 'NONE', *, *, #63101, .F. ) ; +#77420 = CIRCLE ( 'NONE', #53137, 10.50000000000009200 ) ; +#77421 = ORIENTED_EDGE ( 'NONE', *, *, #19750, .T. ) ; +#77422 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77423 = AXIS2_PLACEMENT_3D ( 'NONE', #58442, #21205, #64738 ) ; +#77424 = ORIENTED_EDGE ( 'NONE', *, *, #12738, .F. ) ; +#77425 = ADVANCED_FACE ( 'NONE', ( #63879 ), #78481, .T. ) ; +#77426 = EDGE_LOOP ( 'NONE', ( #41132, #11902, #49499 ) ) ; +#77427 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#77428 = CONICAL_SURFACE ( 'NONE', #21687, 10.00000000000009600, 0.7853981633974482800 ) ; +#77429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77430 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679515200, 81.08083798124324900, -28.45106778992441600 ) ) ; +#77431 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 0.8333333333333405900, 6.794441961969992500 ) ) ; +#77432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77433 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#77434 = EDGE_LOOP ( 'NONE', ( #60608, #66694, #47237 ) ) ; +#77435 = LINE ( 'NONE', #80456, #17118 ) ; +#77436 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9221, #2979, #21776, #65329 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.781279034813945800E-017, 0.001179148174663129300 ), + .UNSPECIFIED. ) ; +#77437 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77439 = ADVANCED_FACE ( 'NONE', ( #18126 ), #45314, .T. ) ; +#77440 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103800, 59.94924284854708700, -28.20555803802997700 ) ) ; +#77441 = AXIS2_PLACEMENT_3D ( 'NONE', #61305, #80042, #42759 ) ; +#77442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77443 = EDGE_CURVE ( 'NONE', #14016, #44553, #76205, .T. ) ; +#77444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77445 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274715200, 24.54999999999997200, -28.20555803802994200 ) ) ; +#77446 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#77447 = CARTESIAN_POINT ( 'NONE', ( -3.568292696511867800, 59.60439022488333900, -28.70555803802997700 ) ) ; +#77448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77450 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77451 = FACE_OUTER_BOUND ( 'NONE', #25314, .T. ) ; +#77452 = ADVANCED_FACE ( 'NONE', ( #30781 ), #12287, .F. ) ; +#77453 = EDGE_CURVE ( 'NONE', #19495, #32321, #61781, .T. ) ; +#77454 = CONICAL_SURFACE ( 'NONE', #66589, 10.50000000000009600, 0.7853981633974482800 ) ; +#77455 = AXIS2_PLACEMENT_3D ( 'NONE', #2812, #15360, #71105 ) ; +#77456 = EDGE_LOOP ( 'NONE', ( #13716, #17233, #79841, #72358 ) ) ; +#77457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77458 = EDGE_LOOP ( 'NONE', ( #57353, #48512, #55560 ) ) ; +#77459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77460 = CIRCLE ( 'NONE', #19703, 10.50000000000009900 ) ; +#77461 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77462 = PLANE ( 'NONE', #24769 ) ; +#77464 = VERTEX_POINT ( 'NONE', #31587 ) ; +#77463 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462811600, 60.34267608797633600, -28.20555803803030800 ) ) ; +#77465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77466 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63962, #20426, #32918, #76426 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585397364485300E-007, 0.0003301092607755714700 ), + .UNSPECIFIED. ) ; +#77467 = ADVANCED_FACE ( 'NONE', ( #65832 ), #59979, .T. ) ; +#77468 = FACE_OUTER_BOUND ( 'NONE', #21823, .T. ) ; +#77469 = AXIS2_PLACEMENT_3D ( 'NONE', #9814, #53319, #16071 ) ; +#77470 = CIRCLE ( 'NONE', #4295, 9.500000000000095900 ) ; +#77471 = VERTEX_POINT ( 'NONE', #13096 ) ; +#77472 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77473 = CARTESIAN_POINT ( 'NONE', ( 2.487410011450807500, 90.12140959735980100, -28.55996453402235600 ) ) ; +#77474 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 10.16666666666668200, -12.20555803803000000 ) ) ; +#77475 = FACE_OUTER_BOUND ( 'NONE', #57992, .T. ) ; +#77476 = CARTESIAN_POINT ( 'NONE', ( -13.08245618894333800, 45.55000000000000400, -28.70555803802996700 ) ) ; +#77477 = EDGE_LOOP ( 'NONE', ( #33452, #11810, #32183, #69834 ) ) ; +#77478 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#77479 = VERTEX_POINT ( 'NONE', #56586 ) ; +#77480 = ADVANCED_FACE ( 'NONE', ( #61931 ), #26880, .T. ) ; +#77481 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 44.50000000000000700, 2.454695999814380200 ) ) ; +#77482 = AXIS2_PLACEMENT_3D ( 'NONE', #59829, #66080, #53555 ) ; +#77483 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12849, #50042, #25354, #68853 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001328742025104753800, 0.0005411754951806998000 ), + .UNSPECIFIED. ) ; +#77487 = FACE_OUTER_BOUND ( 'NONE', #14284, .T. ) ; +#77486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77488 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551030900, 9.500000000000016000, 4.650848422521012700 ) ) ; +#77489 = CIRCLE ( 'NONE', #23124, 10.50000000000009600 ) ; +#77490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#77491 = ORIENTED_EDGE ( 'NONE', *, *, #15164, .T. ) ; +#77492 = CARTESIAN_POINT ( 'NONE', ( -17.07349692871594000, 51.37839075872577900, -28.29547734244345100 ) ) ; +#77493 = EDGE_CURVE ( 'NONE', #64580, #52738, #43390, .T. ) ; +#77494 = ORIENTED_EDGE ( 'NONE', *, *, #17951, .T. ) ; +#77495 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999300, 101.5999999999999900, 16.29444196196999100 ) ) ; +#77496 = ORIENTED_EDGE ( 'NONE', *, *, #49725, .T. ) ; +#77497 = ORIENTED_EDGE ( 'NONE', *, *, #20956, .T. ) ; +#77498 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 46.83333333333333600, -4.152999154772353500 ) ) ; +#77499 = CARTESIAN_POINT ( 'NONE', ( 16.79415140346212400, 70.20590598242331700, -28.39369363572410900 ) ) ; +#77500 = ORIENTED_EDGE ( 'NONE', *, *, #9615, .T. ) ; +#77501 = CONICAL_SURFACE ( 'NONE', #51059, 10.50000000000009400, 0.7853981633974500600 ) ; +#77502 = CONICAL_SURFACE ( 'NONE', #19151, 10.50000000000009600, 0.7853981633974518300 ) ; +#77503 = ORIENTED_EDGE ( 'NONE', *, *, #29921, .T. ) ; +#77504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77505 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#77506 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000002700, 84.37738371066727400, -28.70555803802997700 ) ) ; +#77507 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.47246552159110400, -28.38801640354855500 ) ) ; +#77508 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77509 = FACE_OUTER_BOUND ( 'NONE', #22164, .T. ) ; +#77510 = EDGE_CURVE ( 'NONE', #17583, #51526, #47269, .T. ) ; +#77511 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77512 = CARTESIAN_POINT ( 'NONE', ( 10.46481234601706400, 9.406791769321971600, -28.68794773163825000 ) ) ; +#77513 = EDGE_LOOP ( 'NONE', ( #62638, #42585, #74243, #53853, #78743 ) ) ; +#77514 = CIRCLE ( 'NONE', #35049, 10.00000000000009200 ) ; +#77515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77516 = EDGE_CURVE ( 'NONE', #33227, #49122, #28875, .T. ) ; +#77517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45149, #63994, #57973, #20725 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225169465500E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#77518 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#77519 = CARTESIAN_POINT ( 'NONE', ( -3.464812346016866900, 9.406791769321907600, -28.68794773163824300 ) ) ; +#77520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77522 = AXIS2_PLACEMENT_3D ( 'NONE', #66144, #16364, #28913 ) ; +#77523 = EDGE_CURVE ( 'NONE', #74524, #39642, #14222, .T. ) ; +#77524 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999800, 58.62623792124937700, -28.70555803802997700 ) ) ; +#77525 = ORIENTED_EDGE ( 'NONE', *, *, #58448, .F. ) ; +#77526 = EDGE_CURVE ( 'NONE', #20371, #62691, #16182, .T. ) ; +#77527 = CARTESIAN_POINT ( 'NONE', ( -8.660254037844493900, 75.46616414991793000, -28.37247596307101100 ) ) ; +#77528 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#77529 = AXIS2_PLACEMENT_3D ( 'NONE', #55349, #42847, #11867 ) ; +#77530 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 50.33333333333334300, -5.205558038030008400 ) ) ; +#77531 = FACE_OUTER_BOUND ( 'NONE', #80014, .T. ) ; +#77532 = CARTESIAN_POINT ( 'NONE', ( 2.254548258615030500, 49.59617684379258400, -28.64146614751470600 ) ) ; +#77533 = VERTEX_POINT ( 'NONE', #63411 ) ; +#77534 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#77535 = LINE ( 'NONE', #50168, #64921 ) ; +#77536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77537 = ORIENTED_EDGE ( 'NONE', *, *, #58151, .F. ) ; +#77538 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77539 = ADVANCED_FACE ( 'NONE', ( #76484 ), #8335, .F. ) ; +#77540 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390048300, 70.13716795162662300, -28.48697406221649700 ) ) ; +#77541 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#77542 = AXIS2_PLACEMENT_3D ( 'NONE', #80748, #24999, #43466 ) ; +#77543 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77544 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#77545 = ORIENTED_EDGE ( 'NONE', *, *, #52333, .F. ) ; +#77546 = EDGE_CURVE ( 'NONE', #43819, #16363, #32825, .T. ) ; +#77547 = EDGE_CURVE ( 'NONE', #12788, #45183, #18386, .T. ) ; +#77548 = AXIS2_PLACEMENT_3D ( 'NONE', #40127, #2851, #46341 ) ; +#77549 = FACE_OUTER_BOUND ( 'NONE', #53153, .T. ) ; +#77550 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432844600, 41.24660241562189400, -28.20555803802996700 ) ) ; +#77551 = CIRCLE ( 'NONE', #25653, 10.00000000000009400 ) ; +#77552 = VERTEX_POINT ( 'NONE', #69890 ) ; +#77553 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 48.66666666666667900, 5.722645192245505700 ) ) ; +#77554 = ADVANCED_FACE ( 'NONE', ( #41456 ), #56041, .F. ) ; +#77555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77557 = ORIENTED_EDGE ( 'NONE', *, *, #41564, .T. ) ; +#77556 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77558 = ADVANCED_FACE ( 'NONE', ( #58004 ), #22970, .F. ) ; +#77559 = EDGE_CURVE ( 'NONE', #14698, #70930, #3914, .T. ) ; +#77560 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 15.49999999999999800, 4.650848422521016300 ) ) ; +#77561 = ORIENTED_EDGE ( 'NONE', *, *, #47691, .F. ) ; +#77562 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#77563 = AXIS2_PLACEMENT_3D ( 'NONE', #41432, #4175, #47658 ) ; +#77564 = AXIS2_PLACEMENT_3D ( 'NONE', #38785, #45020, #76072 ) ; +#77565 = CARTESIAN_POINT ( 'NONE', ( 10.52345074905842300, 9.410658797990134200, -28.68817753164652400 ) ) ; +#77566 = CARTESIAN_POINT ( 'NONE', ( 10.79205576049509600, 31.40771342879317300, -28.53891855579981800 ) ) ; +#77567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46589, #9352, #65440, #28178 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002810765684464040500, 0.001179659862024339300 ), + .UNSPECIFIED. ) ; +#77568 = ADVANCED_FACE ( 'NONE', ( #1561 ), #70641, .F. ) ; +#77569 = CIRCLE ( 'NONE', #2701, 10.00000000000009200 ) ; +#77570 = EDGE_LOOP ( 'NONE', ( #38112, #32793, #18876, #36050, #32915, #38680, #71675 ) ) ; +#77571 = ORIENTED_EDGE ( 'NONE', *, *, #57141, .F. ) ; +#77572 = CARTESIAN_POINT ( 'NONE', ( 3.132146184890736200, 28.97143078992715500, -28.37063977681165700 ) ) ; +#77573 = VERTEX_POINT ( 'NONE', #14418 ) ; +#77574 = ORIENTED_EDGE ( 'NONE', *, *, #79314, .T. ) ; +#77575 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#77576 = FACE_OUTER_BOUND ( 'NONE', #26999, .T. ) ; +#77577 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155616900, 18.83333333333333900, -6.205558038030004800 ) ) ; +#77578 = ORIENTED_EDGE ( 'NONE', *, *, #15046, .T. ) ; +#77579 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655449300, 31.17701665379220800, -28.20555803802996000 ) ) ; +#77580 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#77581 = CARTESIAN_POINT ( 'NONE', ( -16.68767301991453400, 64.52958894367176900, -28.56367862433818400 ) ) ; +#77582 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 59.00000000000001400, -9.205558038030005700 ) ) ; +#77583 = CONICAL_SURFACE ( 'NONE', #14294, 10.00000000000009600, 0.7853981633974447300 ) ; +#77584 = AXIS2_PLACEMENT_3D ( 'NONE', #56965, #19706, #63238 ) ; +#77585 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#77586 = ORIENTED_EDGE ( 'NONE', *, *, #76678, .F. ) ; +#77587 = VERTEX_POINT ( 'NONE', #8123 ) ; +#77588 = FACE_OUTER_BOUND ( 'NONE', #65193, .T. ) ; +#77589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77591 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#77590 = CIRCLE ( 'NONE', #48015, 10.50000000000009600 ) ; +#77592 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77593 = AXIS2_PLACEMENT_3D ( 'NONE', #9112, #52636, #15404 ) ; +#77594 = ORIENTED_EDGE ( 'NONE', *, *, #3848, .F. ) ; +#77595 = CARTESIAN_POINT ( 'NONE', ( 8.660254037844504500, 76.13383585008155300, -28.37247596307075900 ) ) ; +#77596 = EDGE_CURVE ( 'NONE', #76201, #49980, #70216, .T. ) ; +#77597 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 23.37738371066728900, -28.70555803802995200 ) ) ; +#77598 = CARTESIAN_POINT ( 'NONE', ( -9.497924978448507400, 90.99854748491394200, -28.70555803802997700 ) ) ; +#77599 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000010700, 21.33333333333335000, 3.124568980892187500 ) ) ; +#77600 = AXIS2_PLACEMENT_3D ( 'NONE', #2826, #77376, #9066 ) ; +#77601 = FACE_OUTER_BOUND ( 'NONE', #47263, .T. ) ; +#77602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77603 = ORIENTED_EDGE ( 'NONE', *, *, #19056, .F. ) ; +#77604 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999962300, 49.13176086632792300, -28.70555803802996700 ) ) ; +#77605 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541607300, 39.58874248361071600, -28.53740755999535500 ) ) ; +#77606 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43558, #18836, #25094, #68619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004038141353401222600, 0.004682530427071084100 ), + .UNSPECIFIED. ) ; +#77607 = CARTESIAN_POINT ( 'NONE', ( -2.904737509655644300, 41.67701665379239300, -28.20555803802997400 ) ) ; +#77608 = VERTEX_POINT ( 'NONE', #64223 ) ; +#77609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77610 = CARTESIAN_POINT ( 'NONE', ( 11.26652678188356300, 41.39435118792235400, -28.41114655922301700 ) ) ; +#77611 = CIRCLE ( 'NONE', #8106, 10.00000000000009400 ) ; +#77612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77613 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77614 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77615 = ORIENTED_EDGE ( 'NONE', *, *, #41424, .T. ) ; +#77616 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#77617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77618 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.20555803802997700 ) ) ; +#77619 = CARTESIAN_POINT ( 'NONE', ( 16.99797127827574500, 41.31091476818473800, -28.25432823872347000 ) ) ; +#77620 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77621 = FACE_OUTER_BOUND ( 'NONE', #42128, .T. ) ; +#77623 = EDGE_CURVE ( 'NONE', #74788, #50435, #55751, .T. ) ; +#77622 = ORIENTED_EDGE ( 'NONE', *, *, #37577, .F. ) ; +#77624 = CARTESIAN_POINT ( 'NONE', ( 17.10696782501636200, 92.65348391250817900, -28.48107268352801200 ) ) ; +#77625 = EDGE_CURVE ( 'NONE', #66277, #13135, #41304, .T. ) ; +#77626 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000040500, 87.94142842854287800, -28.20555803803047800 ) ) ; +#77627 = CARTESIAN_POINT ( 'NONE', ( -4.107997457345463000, 71.32559822014182800, -28.29986836858021000 ) ) ; +#77628 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.70555803803030800 ) ) ; +#77629 = VERTEX_POINT ( 'NONE', #14691 ) ; +#77630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#77631 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803803001300 ) ) ; +#77632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77633 = EDGE_CURVE ( 'NONE', #66036, #40694, #26865, .T. ) ; +#77634 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77635 = CIRCLE ( 'NONE', #21334, 10.50000000000009600 ) ; +#77636 = EDGE_CURVE ( 'NONE', #14665, #62844, #12412, .T. ) ; +#77637 = CONICAL_SURFACE ( 'NONE', #29822, 10.50000000000009200, 0.7853981633974482800 ) ; +#77638 = ORIENTED_EDGE ( 'NONE', *, *, #40937, .T. ) ; +#77639 = AXIS2_PLACEMENT_3D ( 'NONE', #44595, #32147, #13406 ) ; +#77640 = VERTEX_POINT ( 'NONE', #8670 ) ; +#77641 = ORIENTED_EDGE ( 'NONE', *, *, #55037, .T. ) ; +#77642 = EDGE_LOOP ( 'NONE', ( #15193, #20011, #18100, #63248 ) ) ; +#77643 = VERTEX_POINT ( 'NONE', #70976 ) ; +#77644 = ORIENTED_EDGE ( 'NONE', *, *, #71209, .F. ) ; +#77645 = CARTESIAN_POINT ( 'NONE', ( 16.10512553856427700, 19.05333467158378400, -28.65803483468293000 ) ) ; +#77646 = ADVANCED_FACE ( 'NONE', ( #72623 ), #37523, .F. ) ; +#77647 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 65.00000000000000000, -1.205558038030005300 ) ) ; +#77648 = ORIENTED_EDGE ( 'NONE', *, *, #29907, .T. ) ; +#77649 = EDGE_CURVE ( 'NONE', #55373, #16929, #54095, .T. ) ; +#77650 = PLANE ( 'NONE', #14292 ) ; +#77651 = EDGE_CURVE ( 'NONE', #10748, #68184, #78735, .T. ) ; +#77652 = EDGE_CURVE ( 'NONE', #74996, #72453, #64285, .T. ) ; +#77653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77654 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69426, #25943, #32182, #75679 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279228135638900E-007, 0.001119324643800066500 ), + .UNSPECIFIED. ) ; +#77655 = ADVANCED_FACE ( 'NONE', ( #10323 ), #68697, .F. ) ; +#77656 = EDGE_LOOP ( 'NONE', ( #19423, #11218, #15622, #16241 ) ) ; +#77657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77658 = CONICAL_SURFACE ( 'NONE', #73591, 10.50000000000009600, 0.7853981633974500600 ) ; +#77659 = AXIS2_PLACEMENT_3D ( 'NONE', #67802, #24287, #73793 ) ; +#77660 = VERTEX_POINT ( 'NONE', #59004 ) ; +#77661 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77662 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60482, #79241, #66992, #29761 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735855423900E-007, 0.0008693051355035875300 ), + .UNSPECIFIED. ) ; +#77663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77664 = EDGE_LOOP ( 'NONE', ( #18545, #64249, #37098, #79496 ) ) ; +#77665 = AXIS2_PLACEMENT_3D ( 'NONE', #76451, #51667, #14459 ) ; +#77666 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #38782, #76068, #45018, #7785 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002959666247646341700, 0.0009605145132142456100 ), + .UNSPECIFIED. ) ; +#77667 = CIRCLE ( 'NONE', #45878, 10.00000000000009200 ) ; +#77668 = EDGE_CURVE ( 'NONE', #15529, #39046, #49745, .T. ) ; +#77669 = AXIS2_PLACEMENT_3D ( 'NONE', #51965, #45721, #33252 ) ; +#77671 = EDGE_LOOP ( 'NONE', ( #6163, #78877, #19245 ) ) ; +#77670 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77672 = ADVANCED_FACE ( 'NONE', ( #74561 ), #35624, .T. ) ; +#77673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77674 = CARTESIAN_POINT ( 'NONE', ( -16.52200773131488300, 20.47693523592504100, -28.54785533206974400 ) ) ; +#77675 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77676 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 36.33333333333332900, 4.294441961970000500 ) ) ; +#77677 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31693, #12928, #62975, #25721 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003205584962723712600, 0.0008252574424211113900 ), + .UNSPECIFIED. ) ; +#77678 = CARTESIAN_POINT ( 'NONE', ( -17.22127746188003500, 9.569148358746641500, -28.45573375118225100 ) ) ; +#77679 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77680 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543039900, 18.23522516708057900, -28.27573853395027500 ) ) ; +#77681 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 80.16749699759769500, -28.20555803802997700 ) ) ; +#77682 = CIRCLE ( 'NONE', #2028, 10.50000000000009600 ) ; +#77683 = ORIENTED_EDGE ( 'NONE', *, *, #8521, .T. ) ; +#77684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77685 = EDGE_LOOP ( 'NONE', ( #36415, #45815, #27320, #198 ) ) ; +#77686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77688 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#77689 = CARTESIAN_POINT ( 'NONE', ( 16.69011658230019200, 92.44505829115667000, -28.59787178215334100 ) ) ; +#77690 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451032800, 20.44069092601377900, -28.35186440610856800 ) ) ; +#77691 = CARTESIAN_POINT ( 'NONE', ( 16.81665446368110800, 6.893879557643169100, -28.20555803802619400 ) ) ; +#77692 = AXIS2_PLACEMENT_3D ( 'NONE', #29563, #73054, #35781 ) ; +#77693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77694 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77695 = FACE_OUTER_BOUND ( 'NONE', #55548, .T. ) ; +#77696 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, -1.333333333333325300, -8.133761268305512700 ) ) ; +#77697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77698 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77699 = ORIENTED_EDGE ( 'NONE', *, *, #50286, .F. ) ; +#77700 = ORIENTED_EDGE ( 'NONE', *, *, #77274, .T. ) ; +#77701 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274330700, 36.93535825203924400, -28.53896444442198900 ) ) ; +#77702 = AXIS2_PLACEMENT_3D ( 'NONE', #7963, #51456, #14242 ) ; +#77703 = PLANE ( 'NONE', #36824 ) ; +#77704 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46691, #21976, #40732, #3454 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.028674238314313200E-007, 0.0007606607323829861000 ), + .UNSPECIFIED. ) ; +#77705 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#77706 = EDGE_CURVE ( 'NONE', #11625, #38778, #39488, .T. ) ; +#77707 = CIRCLE ( 'NONE', #8146, 9.500000000000099500 ) ; +#77708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77709 = CIRCLE ( 'NONE', #38554, 10.00000000000009600 ) ; +#77710 = EDGE_LOOP ( 'NONE', ( #10616, #10868, #52975, #79819 ) ) ; +#77711 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033100, 61.46283204837305200, -28.48697406221690900 ) ) ; +#77712 = VERTEX_POINT ( 'NONE', #40505 ) ; +#77713 = AXIS2_PLACEMENT_3D ( 'NONE', #77186, #39920, #2631 ) ; +#77714 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#77715 = ORIENTED_EDGE ( 'NONE', *, *, #42959, .F. ) ; +#77716 = CONICAL_SURFACE ( 'NONE', #43904, 10.50000000000009600, 0.7853981633974482800 ) ; +#77717 = VERTEX_POINT ( 'NONE', #9486 ) ; +#77718 = VERTEX_POINT ( 'NONE', #78046 ) ; +#77719 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77720 = ORIENTED_EDGE ( 'NONE', *, *, #25237, .F. ) ; +#77721 = ORIENTED_EDGE ( 'NONE', *, *, #63369, .T. ) ; +#77722 = ORIENTED_EDGE ( 'NONE', *, *, #56858, .T. ) ; +#77723 = ORIENTED_EDGE ( 'NONE', *, *, #16522, .F. ) ; +#77724 = CARTESIAN_POINT ( 'NONE', ( -16.71682349290089000, 41.53732497909459200, -28.41043597897467900 ) ) ; +#77725 = CARTESIAN_POINT ( 'NONE', ( -2.875008334730494700, 81.58737389638851300, -28.29936525552444900 ) ) ; +#77726 = ORIENTED_EDGE ( 'NONE', *, *, #49939, .F. ) ; +#77727 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 39.15930907398619400, -28.35186440610857500 ) ) ; +#77728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77730 = ADVANCED_FACE ( 'NONE', ( #6416 ), #15762, .T. ) ; +#77731 = CONICAL_SURFACE ( 'NONE', #57383, 10.00000000000009400, 0.7853981633974447300 ) ; +#77732 = EDGE_CURVE ( 'NONE', #46074, #56169, #21027, .T. ) ; +#77733 = ORIENTED_EDGE ( 'NONE', *, *, #54582, .T. ) ; +#77734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77735 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 8.000000000000012400, 9.794441961969996100 ) ) ; +#77736 = ORIENTED_EDGE ( 'NONE', *, *, #77394, .F. ) ; +#77737 = ORIENTED_EDGE ( 'NONE', *, *, #23851, .T. ) ; +#77738 = EDGE_CURVE ( 'NONE', #79198, #30222, #35354, .T. ) ; +#77739 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77740 = FACE_OUTER_BOUND ( 'NONE', #58654, .T. ) ; +#77741 = ADVANCED_FACE ( 'NONE', ( #4460 ), #59560, .T. ) ; +#77742 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 42.33333333333334300, -5.535685056952199400 ) ) ; +#77743 = ORIENTED_EDGE ( 'NONE', *, *, #77738, .T. ) ; +#77744 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#77745 = EDGE_CURVE ( 'NONE', #76219, #62053, #19051, .T. ) ; +#77746 = VERTEX_POINT ( 'NONE', #66083 ) ; +#77747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77748 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999993300, 7.333333333333344600, -8.133761268305512700 ) ) ; +#77749 = EDGE_CURVE ( 'NONE', #31391, #76858, #20877, .T. ) ; +#77750 = AXIS2_PLACEMENT_3D ( 'NONE', #46099, #8826, #52351 ) ; +#77751 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77752 = EDGE_CURVE ( 'NONE', #2762, #71627, #6402, .T. ) ; +#77753 = FACE_OUTER_BOUND ( 'NONE', #52149, .T. ) ; +#77754 = ORIENTED_EDGE ( 'NONE', *, *, #55078, .F. ) ; +#77755 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 44.66666666666667100, 4.294441961969993400 ) ) ; +#77756 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714284700, 36.92318720225497200, -28.70555803802995200 ) ) ; +#77757 = VERTEX_POINT ( 'NONE', #72613 ) ; +#77758 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77759 = AXIS2_PLACEMENT_3D ( 'NONE', #66916, #29679, #73183 ) ; +#77760 = EDGE_CURVE ( 'NONE', #54435, #78128, #24921, .T. ) ; +#77761 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510618300, 9.940690926013793700, -28.35186440610865300 ) ) ; +#77762 = EDGE_CURVE ( 'NONE', #58782, #76799, #2485, .T. ) ; +#77763 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252732000, 18.13131911501820400, -28.51286550264586600 ) ) ; +#77764 = EDGE_CURVE ( 'NONE', #17412, #57461, #66764, .T. ) ; +#77765 = ADVANCED_FACE ( 'NONE', ( #52115 ), #31721, .T. ) ; +#77766 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 75.79999999999950000, -28.20555803803047800 ) ) ; +#77767 = CARTESIAN_POINT ( 'NONE', ( 17.70813552120824900, 39.38098890548148700, -28.33427604305564200 ) ) ; +#77768 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #76617, #33120, #2088, #45573 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 4.726440864384268400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999835454473604600, 0.9999835454473604600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#77769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77770 = AXIS2_PLACEMENT_3D ( 'NONE', #19472, #50420, #56721 ) ; +#77771 = CONICAL_SURFACE ( 'NONE', #52498, 10.00000000000009400, 0.7853981633974447300 ) ; +#77772 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280406300, 77.94142842854296300, -28.37229765499282100 ) ) ; +#77773 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77774 = CIRCLE ( 'NONE', #42628, 10.50000000000009200 ) ; +#77775 = CARTESIAN_POINT ( 'NONE', ( 9.487410011450604600, 80.12140959735965900, -28.55996453402259800 ) ) ; +#77776 = ORIENTED_EDGE ( 'NONE', *, *, #12504, .F. ) ; +#77777 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582700, 85.79999999999985500, -28.70525300642875200 ) ) ; +#77779 = ORIENTED_EDGE ( 'NONE', *, *, #49615, .T. ) ; +#77778 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#77780 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 90.79999999999950000, -28.20555803803047800 ) ) ; +#77781 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#77782 = CARTESIAN_POINT ( 'NONE', ( 4.561825084090888700, 20.48385710212512100, -28.57719681746176100 ) ) ; +#77783 = AXIS2_PLACEMENT_3D ( 'NONE', #35613, #79129, #41837 ) ; +#77784 = AXIS2_PLACEMENT_3D ( 'NONE', #79794, #30317, #24037 ) ; +#77785 = ORIENTED_EDGE ( 'NONE', *, *, #41309, .T. ) ; +#77786 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#77787 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #30462, #61473, #36683, #80205 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001246264537621167600 ), + .UNSPECIFIED. ) ; +#77788 = FACE_OUTER_BOUND ( 'NONE', #7044, .T. ) ; +#77789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77790 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 101.5999999999999900, 13.79444196196998700 ) ) ; +#77791 = ORIENTED_EDGE ( 'NONE', *, *, #75386, .T. ) ; +#77792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77793 = CIRCLE ( 'NONE', #39037, 10.50000000000009200 ) ; +#77794 = EDGE_LOOP ( 'NONE', ( #3222, #80541, #47949 ) ) ; +#77795 = ORIENTED_EDGE ( 'NONE', *, *, #14022, .F. ) ; +#77796 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 48.16666666666665700, 0.9380355014189834000 ) ) ; +#77797 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#77798 = VERTEX_POINT ( 'NONE', #48071 ) ; +#77799 = FACE_OUTER_BOUND ( 'NONE', #37181, .T. ) ; +#77800 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71750, #46942, #65765, #28532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925467951582424600E-007, 0.0007331043932795703100 ), + .UNSPECIFIED. ) ; +#77801 = EDGE_LOOP ( 'NONE', ( #16738, #13608, #38401, #59408 ) ) ; +#77803 = ORIENTED_EDGE ( 'NONE', *, *, #29338, .T. ) ; +#77802 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#77804 = VERTEX_POINT ( 'NONE', #10854 ) ; +#77805 = ORIENTED_EDGE ( 'NONE', *, *, #79114, .T. ) ; +#77806 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#77807 = AXIS2_PLACEMENT_3D ( 'NONE', #79443, #42146, #4905 ) ; +#77809 = ORIENTED_EDGE ( 'NONE', *, *, #27738, .T. ) ; +#77808 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 59.81066373133501900, -28.53923937255172300 ) ) ; +#77810 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#77811 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77812 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21574, #77298, #71315, #34063 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866807013700E-007, 0.001076778502991517800 ), + .UNSPECIFIED. ) ; +#77813 = AXIS2_PLACEMENT_3D ( 'NONE', #16214, #78226, #59742 ) ; +#77814 = ORIENTED_EDGE ( 'NONE', *, *, #50174, .F. ) ; +#77815 = CIRCLE ( 'NONE', #49476, 10.50000000000009600 ) ; +#77816 = PLANE ( 'NONE', #42035 ) ; +#77817 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 50.83333333333335000, -9.205558038030003900 ) ) ; +#77818 = VERTEX_POINT ( 'NONE', #4583 ) ; +#77819 = EDGE_CURVE ( 'NONE', #59631, #18101, #72743, .T. ) ; +#77820 = VERTEX_POINT ( 'NONE', #54346 ) ; +#77821 = CARTESIAN_POINT ( 'NONE', ( -4.124991665269854800, 81.58737389638842800, -28.29936525552465900 ) ) ; +#77822 = ORIENTED_EDGE ( 'NONE', *, *, #50692, .F. ) ; +#77823 = ORIENTED_EDGE ( 'NONE', *, *, #35047, .F. ) ; +#77824 = AXIS2_PLACEMENT_3D ( 'NONE', #68010, #30765, #74287 ) ; +#77825 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#77826 = CIRCLE ( 'NONE', #47280, 10.00000000000009200 ) ; +#77827 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 13.33333333333335000, -5.205558038030008400 ) ) ; +#77828 = CARTESIAN_POINT ( 'NONE', ( 20.15073647615661700, 94.17536818148286700, -27.27701809097457500 ) ) ; +#77829 = EDGE_LOOP ( 'NONE', ( #25005, #19676, #14628, #49272 ) ) ; +#77830 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77831 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105664800, 24.55000000000001100, -28.70555803802994200 ) ) ; +#77832 = EDGE_LOOP ( 'NONE', ( #30525, #49845, #67140 ) ) ; +#77833 = ADVANCED_FACE ( 'NONE', ( #64827 ), #79405, .F. ) ; +#77834 = AXIS2_PLACEMENT_3D ( 'NONE', #77886, #3343, #34372 ) ; +#77835 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 32.47376207875060300, -28.70555803802996700 ) ) ; +#77836 = CONICAL_SURFACE ( 'NONE', #67109, 10.50000000000009400, 0.7853981633974500600 ) ; +#77838 = ORIENTED_EDGE ( 'NONE', *, *, #73473, .F. ) ; +#77837 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999990900, 90.80000000000001100, -28.70555803802997700 ) ) ; +#77839 = EDGE_LOOP ( 'NONE', ( #41867, #72969, #60488, #71689 ) ) ; +#77840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77841 = VERTEX_POINT ( 'NONE', #11125 ) ; +#77842 = ADVANCED_FACE ( 'NONE', ( #535 ), #46254, .F. ) ; +#77843 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999992900, 16.66666666666667500, 3.124568980892192800 ) ) ; +#77844 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609406800, 71.46283204837340000, -28.48697406221669900 ) ) ; +#77845 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818077700, 69.94924284854670300, -28.20555803803047800 ) ) ; +#77846 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16322, #34831, #66099, #28879 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220885675103734400E-007, 0.0007987728781052868400 ), + .UNSPECIFIED. ) ; +#77847 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77848 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914546900, 51.82440674572707500, -28.45987523529580100 ) ) ; +#77849 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 56.83333333333335000, 6.794441961969992500 ) ) ; +#77850 = CARTESIAN_POINT ( 'NONE', ( 2.621978672528190400, 39.13131911501876200, -28.51286550264508800 ) ) ; +#77851 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 96.59999999999999400, -18.70555803803001300 ) ) ; +#77852 = EDGE_CURVE ( 'NONE', #56186, #44206, #62864, .T. ) ; +#77853 = FACE_OUTER_BOUND ( 'NONE', #33052, .T. ) ; +#77854 = ADVANCED_FACE ( 'NONE', ( #50162 ), #73407, .T. ) ; +#77855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77856 = EDGE_CURVE ( 'NONE', #39176, #57435, #58253, .T. ) ; +#77857 = CIRCLE ( 'NONE', #30648, 10.50000000000009900 ) ; +#77858 = ORIENTED_EDGE ( 'NONE', *, *, #49588, .T. ) ; +#77859 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#77860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77863 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#77864 = EDGE_CURVE ( 'NONE', #74850, #34194, #33656, .T. ) ; +#77865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77866 = ADVANCED_FACE ( 'NONE', ( #13231 ), #27832, .T. ) ; +#77867 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77868 = FACE_OUTER_BOUND ( 'NONE', #78687, .T. ) ; +#77869 = ORIENTED_EDGE ( 'NONE', *, *, #47953, .T. ) ; +#77870 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#77871 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77872 = ORIENTED_EDGE ( 'NONE', *, *, #13917, .F. ) ; +#77873 = EDGE_CURVE ( 'NONE', #60285, #20976, #43761, .T. ) ; +#77874 = EDGE_CURVE ( 'NONE', #30909, #65256, #44293, .T. ) ; +#77875 = CARTESIAN_POINT ( 'NONE', ( 2.733473218116473400, 49.70564881207762700, -28.41114655922299900 ) ) ; +#77876 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 4.999999999999997300, 16.29444196196997700 ) ) ; +#77877 = CONICAL_SURFACE ( 'NONE', #69899, 10.00000000000009400, 0.7853981633974447300 ) ; +#77878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77879 = ORIENTED_EDGE ( 'NONE', *, *, #75140, .F. ) ; +#77880 = CARTESIAN_POINT ( 'NONE', ( -11.30404578339071400, 51.46283204837340700, -28.48697406221673100 ) ) ; +#77881 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77882 = ORIENTED_EDGE ( 'NONE', *, *, #40219, .F. ) ; +#77883 = ORIENTED_EDGE ( 'NONE', *, *, #73887, .T. ) ; +#77884 = EDGE_LOOP ( 'NONE', ( #21301, #48871, #51839, #56560, #40909 ) ) ; +#77885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77886 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.20555803802995200 ) ) ; +#77887 = ORIENTED_EDGE ( 'NONE', *, *, #42824, .T. ) ; +#77888 = CARTESIAN_POINT ( 'NONE', ( 0.8996655518395199100, 70.79999999999998300, -28.20555803802988100 ) ) ; +#77889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77890 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169700, 70.34267608797603100, -28.20555803802997700 ) ) ; +#77891 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77892 = AXIS2_PLACEMENT_3D ( 'NONE', #57936, #57656, #32897 ) ; +#77893 = EDGE_CURVE ( 'NONE', #1022, #34852, #29795, .T. ) ; +#77894 = CARTESIAN_POINT ( 'NONE', ( -11.23989450732825500, 71.93585231025954800, -28.38420446581291400 ) ) ; +#77895 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64364, #51768, #33309, #76824 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574800225200E-007, 0.0004053774948092270200 ), + .UNSPECIFIED. ) ; +#77896 = EDGE_CURVE ( 'NONE', #26410, #49911, #29392, .T. ) ; +#77897 = EDGE_CURVE ( 'NONE', #12694, #14656, #14876, .T. ) ; +#77898 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 61.82440674572717400, -28.45987523529583300 ) ) ; +#77899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77900 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.70555803802997700 ) ) ; +#77901 = CIRCLE ( 'NONE', #62520, 10.00000000000009200 ) ; +#77902 = AXIS2_PLACEMENT_3D ( 'NONE', #41194, #72236, #10192 ) ; +#77903 = EDGE_LOOP ( 'NONE', ( #31944, #59719, #53558, #8538 ) ) ; +#77904 = EDGE_LOOP ( 'NONE', ( #50634, #55292, #70211 ) ) ; +#77905 = CARTESIAN_POINT ( 'NONE', ( -9.726435770771296100, 7.503450341052998200, -28.41129763681812600 ) ) ; +#77906 = ORIENTED_EDGE ( 'NONE', *, *, #51258, .T. ) ; +#77907 = ORIENTED_EDGE ( 'NONE', *, *, #6617, .T. ) ; +#77908 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #62456, #25184, #31457, #74963 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.060883542877794500E-017, 0.001492013864175154100 ), + .UNSPECIFIED. ) ; +#77909 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77910 = ORIENTED_EDGE ( 'NONE', *, *, #47446, .T. ) ; +#77911 = VERTEX_POINT ( 'NONE', #12193 ) ; +#77912 = CARTESIAN_POINT ( 'NONE', ( -3.959731041493560700, 9.875614624812470800, -28.30309985153373400 ) ) ; +#77913 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462832100, 81.25732391202397800, -28.20555803802997700 ) ) ; +#77914 = FACE_OUTER_BOUND ( 'NONE', #47147, .T. ) ; +#77915 = AXIS2_PLACEMENT_3D ( 'NONE', #12915, #56393, #19143 ) ; +#77916 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77917 = AXIS2_PLACEMENT_3D ( 'NONE', #30238, #73731, #36445 ) ; +#77918 = CARTESIAN_POINT ( 'NONE', ( 7.917543811056686000, 45.54999999999998300, -28.70555803802996700 ) ) ; +#77919 = ORIENTED_EDGE ( 'NONE', *, *, #19497, .T. ) ; +#77920 = AXIS2_PLACEMENT_3D ( 'NONE', #37051, #80588, #43304 ) ; +#77921 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 70.03751622186548800, -28.32723995587591400 ) ) ; +#77922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77923 = CIRCLE ( 'NONE', #67585, 10.50000000000009800 ) ; +#77924 = ORIENTED_EDGE ( 'NONE', *, *, #74686, .T. ) ; +#77925 = ORIENTED_EDGE ( 'NONE', *, *, #44853, .F. ) ; +#77926 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 62.83333333333334300, -3.349151577478984600 ) ) ; +#77927 = AXIS2_PLACEMENT_3D ( 'NONE', #53504, #16257, #59776 ) ; +#77928 = EDGE_CURVE ( 'NONE', #79387, #31766, #77435, .T. ) ; +#77929 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77931 = CONICAL_SURFACE ( 'NONE', #22394, 10.00000000000009200, 0.7853981633974447300 ) ; +#77932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#77933 = EDGE_CURVE ( 'NONE', #74524, #30323, #398, .T. ) ; +#77934 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000012400, 57.00000000000001400, -1.205558038030006400 ) ) ; +#77935 = ORIENTED_EDGE ( 'NONE', *, *, #72556, .F. ) ; +#77936 = ORIENTED_EDGE ( 'NONE', *, *, #73125, .T. ) ; +#77937 = AXIS2_PLACEMENT_3D ( 'NONE', #64867, #27596, #71088 ) ; +#77938 = VERTEX_POINT ( 'NONE', #43433 ) ; +#77939 = ADVANCED_FACE ( 'NONE', ( #11274 ), #9278, .T. ) ; +#77940 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.49747404049736600, -28.26641963845862500 ) ) ; +#77941 = CARTESIAN_POINT ( 'NONE', ( 3.207944239505165400, 17.69228657120660500, -28.53891855580007700 ) ) ; +#77942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59483, #21948, #65750, #28512 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966553300, 0.0007670610367943081400 ), + .UNSPECIFIED. ) ; +#77943 = CARTESIAN_POINT ( 'NONE', ( 17.24454976001801400, 8.877725119990993000, -28.45040264298925300 ) ) ; +#77944 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77945 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000404100, 87.94142842854303400, -28.20555803803030800 ) ) ; +#77946 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 34.16666666666668600, -4.152999154772358800 ) ) ; +#77947 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#77948 = FACE_OUTER_BOUND ( 'NONE', #44889, .T. ) ; +#77949 = ORIENTED_EDGE ( 'NONE', *, *, #47051, .F. ) ; +#77950 = AXIS2_PLACEMENT_3D ( 'NONE', #56685, #19433, #62969 ) ; +#77951 = ORIENTED_EDGE ( 'NONE', *, *, #30835, .F. ) ; +#77952 = ADVANCED_FACE ( 'NONE', ( #42375 ), #57005, .F. ) ; +#77953 = ORIENTED_EDGE ( 'NONE', *, *, #41754, .F. ) ; +#77954 = FACE_OUTER_BOUND ( 'NONE', #25851, .T. ) ; +#77955 = ORIENTED_EDGE ( 'NONE', *, *, #559, .F. ) ; +#77956 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77957 = ORIENTED_EDGE ( 'NONE', *, *, #52985, .F. ) ; +#77958 = ORIENTED_EDGE ( 'NONE', *, *, #64696, .T. ) ; +#77959 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#77960 = CARTESIAN_POINT ( 'NONE', ( 10.30811372541618600, 18.58874248361047800, -28.53740755999545800 ) ) ; +#77961 = ORIENTED_EDGE ( 'NONE', *, *, #42957, .F. ) ; +#77962 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488088700, 61.99560977511647800, -28.70555803803014400 ) ) ; +#77963 = ADVANCED_FACE ( 'NONE', ( #15156 ), #23922, .F. ) ; +#77964 = ORIENTED_EDGE ( 'NONE', *, *, #9959, .T. ) ; +#77965 = CARTESIAN_POINT ( 'NONE', ( 8.616843969807161900, 74.79999999999998300, -28.70555803802997700 ) ) ; +#77966 = ADVANCED_FACE ( 'NONE', ( #75484 ), #71598, .F. ) ; +#77967 = PLANE ( 'NONE', #19781 ) ; +#77968 = CARTESIAN_POINT ( 'NONE', ( 15.32706481948996200, 23.40566704911476100, -28.70129136469037300 ) ) ; +#77969 = CONICAL_SURFACE ( 'NONE', #54650, 10.00000000000009400, 0.7853981633974447300 ) ; +#77970 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999998900, 28.66749699759768800, -28.20555803802994200 ) ) ; +#77971 = EDGE_CURVE ( 'NONE', #55084, #31957, #7324, .T. ) ; +#77972 = EDGE_LOOP ( 'NONE', ( #13378, #51083, #19593 ) ) ; +#77973 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, -3.499999999999980900, 4.650848422521016300 ) ) ; +#77974 = ORIENTED_EDGE ( 'NONE', *, *, #79238, .T. ) ; +#77975 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77976 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#77977 = ORIENTED_EDGE ( 'NONE', *, *, #45543, .T. ) ; +#77978 = ORIENTED_EDGE ( 'NONE', *, *, #22181, .F. ) ; +#77979 = VERTEX_POINT ( 'NONE', #49933 ) ; +#77980 = ORIENTED_EDGE ( 'NONE', *, *, #37120, .F. ) ; +#77981 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57521, #14009, #70016, #32758 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019569580816700E-007, 0.0007596410370203638000 ), + .UNSPECIFIED. ) ; +#77982 = ORIENTED_EDGE ( 'NONE', *, *, #69970, .T. ) ; +#77983 = CONICAL_SURFACE ( 'NONE', #39929, 10.50000000000009600, 0.7853981633974518300 ) ; +#77984 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510364300, 39.15930907398620100, -28.35186440610857500 ) ) ; +#77985 = CARTESIAN_POINT ( 'NONE', ( 16.62197867252819300, 39.13131911501876200, -28.51286550264508800 ) ) ; +#77986 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 25.72261628933269900, -28.70555803802994200 ) ) ; +#77987 = ORIENTED_EDGE ( 'NONE', *, *, #45805, .T. ) ; +#77988 = CARTESIAN_POINT ( 'NONE', ( 17.06581962135470200, 32.00863606381447100, -28.49020639256001900 ) ) ; +#77989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77990 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.65857157145700300, -28.20555803802997700 ) ) ; +#77991 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 57.14999999999999900, 0.0000000000000000000 ) ) ; +#77992 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77993 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#77994 = EDGE_CURVE ( 'NONE', #47599, #21465, #66755, .T. ) ; +#77995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77996 = FACE_OUTER_BOUND ( 'NONE', #45322, .T. ) ; +#77997 = ORIENTED_EDGE ( 'NONE', *, *, #54809, .T. ) ; +#77998 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64061, #70273, #8242, #51744 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823698062847700E-007, 0.0008724363063899811800 ), + .UNSPECIFIED. ) ; +#77999 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.70555803803047500 ) ) ; +#78000 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.70555803802997700 ) ) ; +#78001 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78003 = EDGE_CURVE ( 'NONE', #58440, #61551, #60918, .T. ) ; +#78004 = CARTESIAN_POINT ( 'NONE', ( 17.24166002679514500, 90.51916201875609100, -28.45106778992441600 ) ) ; +#78005 = EDGE_CURVE ( 'NONE', #47896, #68897, #25868, .T. ) ; +#78006 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428613800, 87.92318720225486600, -28.70555803803047500 ) ) ; +#78007 = EDGE_CURVE ( 'NONE', #46397, #7904, #52233, .T. ) ; +#78008 = AXIS2_PLACEMENT_3D ( 'NONE', #4947, #48169, #42189 ) ; +#78009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78010 = CARTESIAN_POINT ( 'NONE', ( -15.02627602454272600, 75.88244694415101300, -28.70555803803001600 ) ) ; +#78011 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 5.833333333333348100, -12.20555803803000600 ) ) ; +#78012 = VERTEX_POINT ( 'NONE', #13002 ) ; +#78013 = ORIENTED_EDGE ( 'NONE', *, *, #61134, .F. ) ; +#78014 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576700, 20.67701665379184900, -28.20555803802994200 ) ) ; +#78015 = ORIENTED_EDGE ( 'NONE', *, *, #67309, .F. ) ; +#78016 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 40.16666666666667900, 3.794441961969996900 ) ) ; +#78017 = AXIS2_PLACEMENT_3D ( 'NONE', #26146, #69628, #32378 ) ; +#78018 = AXIS2_PLACEMENT_3D ( 'NONE', #78469, #3911, #59694 ) ; +#78019 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78020 = PLANE ( 'NONE', #2480 ) ; +#78021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #28973, #66200, #41417, #4165 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775791071800, 0.0009605145132139130800 ), + .UNSPECIFIED. ) ; +#78022 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#78023 = EDGE_CURVE ( 'NONE', #42426, #50530, #58932, .T. ) ; +#78024 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448995800, 5.166666666666690900, 6.794441961969992500 ) ) ; +#78025 = AXIS2_PLACEMENT_3D ( 'NONE', #72903, #35641, #79165 ) ; +#78026 = CONICAL_SURFACE ( 'NONE', #40830, 10.50000000000009600, 0.7853981633974482800 ) ; +#78027 = ORIENTED_EDGE ( 'NONE', *, *, #54452, .F. ) ; +#78028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78029 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#78030 = ORIENTED_EDGE ( 'NONE', *, *, #14157, .T. ) ; +#78031 = CARTESIAN_POINT ( 'NONE', ( 6.245925939610405200, 44.44999999999998200, 4.531787464554911400 ) ) ; +#78032 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.59999999999999400, -18.70555803803001300 ) ) ; +#78033 = CONICAL_SURFACE ( 'NONE', #33340, 10.00000000000009400, 0.7853981633974447300 ) ; +#78034 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 42.50000000000002100, -9.258116921287651700 ) ) ; +#78035 = CARTESIAN_POINT ( 'NONE', ( -10.56829269651187200, 59.60439022488335300, -28.70555803802997700 ) ) ; +#78036 = EDGE_LOOP ( 'NONE', ( #63379, #80451, #50996, #611, #62303 ) ) ; +#78037 = EDGE_LOOP ( 'NONE', ( #6299, #44133, #41721, #4852 ) ) ; +#78038 = EDGE_LOOP ( 'NONE', ( #55668, #4823, #46212, #995, #34744 ) ) ; +#78039 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344080000, 38.92298334620767300, -28.20555803802995200 ) ) ; +#78040 = EDGE_CURVE ( 'NONE', #898, #40742, #73550, .T. ) ; +#78041 = ORIENTED_EDGE ( 'NONE', *, *, #72085, .F. ) ; +#78042 = ORIENTED_EDGE ( 'NONE', *, *, #39645, .F. ) ; +#78043 = AXIS2_PLACEMENT_3D ( 'NONE', #14103, #63892, #51312 ) ; +#78044 = AXIS2_PLACEMENT_3D ( 'NONE', #28710, #72197, #34934 ) ; +#78045 = CONICAL_SURFACE ( 'NONE', #76007, 10.00000000000009600, 0.7853981633974482800 ) ; +#78046 = CARTESIAN_POINT ( 'NONE', ( 11.78020271195753700, 48.50972971738993800, -28.70555803802997000 ) ) ; +#78047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78048 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78049 = CARTESIAN_POINT ( 'NONE', ( 10.02315967650651300, 20.51912043132465900, -28.30223257055580500 ) ) ; +#78050 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#78051 = ORIENTED_EDGE ( 'NONE', *, *, #59831, .T. ) ; +#78052 = CIRCLE ( 'NONE', #11897, 10.50000000000009600 ) ; +#78053 = ORIENTED_EDGE ( 'NONE', *, *, #69940, .F. ) ; +#78054 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#78055 = PLANE ( 'NONE', #76504 ) ; +#78056 = ORIENTED_EDGE ( 'NONE', *, *, #10830, .F. ) ; +#78057 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 90.79999999999967000, -28.20555803803030800 ) ) ; +#78058 = AXIS2_PLACEMENT_3D ( 'NONE', #415, #50172, #74968 ) ; +#78059 = ORIENTED_EDGE ( 'NONE', *, *, #33908, .T. ) ; +#78060 = EDGE_LOOP ( 'NONE', ( #80526, #58837, #61607 ) ) ; +#78061 = CARTESIAN_POINT ( 'NONE', ( -3.207944239505006400, 17.69228657120669400, -28.53891855579992800 ) ) ; +#78062 = FACE_OUTER_BOUND ( 'NONE', #39467, .T. ) ; +#78063 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78064 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#78065 = ORIENTED_EDGE ( 'NONE', *, *, #70341, .F. ) ; +#78066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78067 = ADVANCED_FACE ( 'NONE', ( #38458 ), #36528, .T. ) ; +#78068 = CONICAL_SURFACE ( 'NONE', #36241, 10.00000000000009600, 0.7853981633974482800 ) ; +#78069 = ADVANCED_FACE ( 'NONE', ( #55032 ), #3431, .F. ) ; +#78070 = ORIENTED_EDGE ( 'NONE', *, *, #16777, .F. ) ; +#78071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78072 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.70555803802996700 ) ) ; +#78073 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78074 = AXIS2_PLACEMENT_3D ( 'NONE', #38582, #63116, #44824 ) ; +#78075 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.00000000000001400, -1.205558038030005300 ) ) ; +#78076 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999961600, 53.89610994602585200, -28.37519436813226300 ) ) ; +#78077 = VECTOR ( 'NONE', #52264, 1000.000000000000000 ) ; +#78078 = ORIENTED_EDGE ( 'NONE', *, *, #76042, .T. ) ; +#78079 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78080 = ORIENTED_EDGE ( 'NONE', *, *, #79114, .F. ) ; +#78081 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #33500, #2470, #45974, #8722 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629351216500500E-007, 0.0003902800319293326200 ), + .UNSPECIFIED. ) ; +#78082 = CARTESIAN_POINT ( 'NONE', ( 2.997971278275739900, 9.810914768184714400, -28.25432823872341700 ) ) ; +#78083 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812200, 30.96868088498122200, -28.51286550264512700 ) ) ; +#78084 = AXIS2_PLACEMENT_3D ( 'NONE', #20155, #63683, #26431 ) ; +#78085 = CARTESIAN_POINT ( 'NONE', ( 4.304045783390045600, 90.13716795162662300, -28.48697406221649700 ) ) ; +#78086 = ADVANCED_FACE ( 'NONE', ( #40439 ), #26049, .T. ) ; +#78087 = CARTESIAN_POINT ( 'NONE', ( 4.319770051898906600, 10.47636006919876400, -28.38670679782154600 ) ) ; +#78088 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 53.00000000000000700, 6.794441961969995200 ) ) ; +#78089 = ORIENTED_EDGE ( 'NONE', *, *, #68336, .F. ) ; +#78090 = CARTESIAN_POINT ( 'NONE', ( -3.867853815109262100, 39.47143078992715500, -28.37063977681167500 ) ) ; +#78091 = ORIENTED_EDGE ( 'NONE', *, *, #46029, .T. ) ; +#78092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78093 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 11.16666666666670000, 0.9380355014189834000 ) ) ; +#78094 = CARTESIAN_POINT ( 'NONE', ( 23.15836309692852900, 95.67918258196456800, -24.51959840644604700 ) ) ; +#78095 = CARTESIAN_POINT ( 'NONE', ( 2.553492182969101500, 89.37488905615676100, -28.55192314908693900 ) ) ; +#78096 = VERTEX_POINT ( 'NONE', #51002 ) ; +#78097 = CONICAL_SURFACE ( 'NONE', #32962, 10.50000000000009600, 0.7853981633974482800 ) ; +#78098 = EDGE_LOOP ( 'NONE', ( #75653, #72210, #16507 ) ) ; +#78099 = FACE_OUTER_BOUND ( 'NONE', #65297, .T. ) ; +#78100 = EDGE_LOOP ( 'NONE', ( #11182, #13909, #78078, #15175 ) ) ; +#78101 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78102 = ORIENTED_EDGE ( 'NONE', *, *, #65961, .T. ) ; +#78103 = FACE_OUTER_BOUND ( 'NONE', #56977, .T. ) ; +#78104 = EDGE_CURVE ( 'NONE', #49034, #49628, #21954, .T. ) ; +#78105 = ORIENTED_EDGE ( 'NONE', *, *, #33609, .T. ) ; +#78106 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914530900, 81.82440674572717400, -28.45987523529583300 ) ) ; +#78107 = ORIENTED_EDGE ( 'NONE', *, *, #17969, .T. ) ; +#78109 = ORIENTED_EDGE ( 'NONE', *, *, #17335, .T. ) ; +#78108 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 14.50000000000000400, -4.865812075874393000 ) ) ; +#78110 = ORIENTED_EDGE ( 'NONE', *, *, #74430, .F. ) ; +#78111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78112 = FACE_OUTER_BOUND ( 'NONE', #65448, .T. ) ; +#78113 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#78114 = EDGE_CURVE ( 'NONE', #28207, #69438, #37782, .T. ) ; +#78115 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #71768, #59520, #10009, #53517 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169390015080500E-007, 0.0008082646680356945200 ), + .UNSPECIFIED. ) ; +#78116 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534568500, 50.49920551340399300, -28.70555803802996700 ) ) ; +#78117 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, 54.66666666666668600, -8.133761268305512700 ) ) ; +#78118 = EDGE_CURVE ( 'NONE', #73841, #9809, #23364, .T. ) ; +#78119 = ORIENTED_EDGE ( 'NONE', *, *, #5870, .T. ) ; +#78120 = AXIS2_PLACEMENT_3D ( 'NONE', #23053, #17065, #48022 ) ; +#78121 = FACE_OUTER_BOUND ( 'NONE', #74652, .T. ) ; +#78122 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 53.89610994602600200, -28.37519436813181200 ) ) ; +#78123 = ORIENTED_EDGE ( 'NONE', *, *, #23665, .F. ) ; +#78124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #853, #50601, #19639, #63173 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207959957300E-007, 0.0008724366121409673400 ), + .UNSPECIFIED. ) ; +#78125 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 49.66749699759768100, -28.20555803802996700 ) ) ; +#78126 = EDGE_LOOP ( 'NONE', ( #57354, #38751, #28942, #34912, #53884 ) ) ; +#78127 = ORIENTED_EDGE ( 'NONE', *, *, #23702, .T. ) ; +#78128 = VERTEX_POINT ( 'NONE', #57563 ) ; +#78129 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78130 = CONICAL_SURFACE ( 'NONE', #16847, 10.00000000000009200, 0.7853981633974447300 ) ; +#78131 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825473900, 80.16054007504465100, -28.34042301926890100 ) ) ; +#78132 = ORIENTED_EDGE ( 'NONE', *, *, #60239, .T. ) ; +#78133 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #61862, #80598, #18601, #62119 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287089391600E-007, 0.0007303759720927721800 ), + .UNSPECIFIED. ) ; +#78134 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78135 = FACE_OUTER_BOUND ( 'NONE', #56732, .T. ) ; +#78136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#78137 = AXIS2_PLACEMENT_3D ( 'NONE', #26515, #51460, #14246 ) ; +#78138 = EDGE_CURVE ( 'NONE', #17105, #54615, #20019, .T. ) ; +#78139 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78140 = EDGE_CURVE ( 'NONE', #32145, #54900, #8849, .T. ) ; +#78141 = EDGE_CURVE ( 'NONE', #46812, #13532, #75207, .T. ) ; +#78142 = ADVANCED_FACE ( 'NONE', ( #69620 ), #51543, .T. ) ; +#78143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78144 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60756, #17222, #73259, #35993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104967074800, 0.0007670610367941894200 ), + .UNSPECIFIED. ) ; +#78146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78145 = AXIS2_PLACEMENT_3D ( 'NONE', #64129, #26844, #70337 ) ; +#78147 = ORIENTED_EDGE ( 'NONE', *, *, #16088, .F. ) ; +#78148 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#78149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78150 = AXIS2_PLACEMENT_3D ( 'NONE', #52941, #65767, #28534 ) ; +#78151 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 61.43650294695131500, -28.30782889147482400 ) ) ; +#78152 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803803001300 ) ) ; +#78153 = FACE_OUTER_BOUND ( 'NONE', #24481, .T. ) ; +#78154 = EDGE_LOOP ( 'NONE', ( #56644, #40721, #22179, #59978 ) ) ; +#78155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78156 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609174500, 34.41466791010179100, -28.53910738522651200 ) ) ; +#78157 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239500, 60.16054007504465100, -28.34042301926880800 ) ) ; +#78158 = AXIS2_PLACEMENT_3D ( 'NONE', #36609, #17868, #73906 ) ; +#78159 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#78160 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 28.66749699759768400, -28.20555803802994200 ) ) ; +#78161 = EDGE_CURVE ( 'NONE', #27806, #6864, #67693, .T. ) ; +#78162 = CARTESIAN_POINT ( 'NONE', ( -17.08198180548963700, 18.15930907398619700, -28.35186440610855000 ) ) ; +#78163 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78164 = ADVANCED_FACE ( 'NONE', ( #5408 ), #49153, .F. ) ; +#78165 = CARTESIAN_POINT ( 'NONE', ( -16.93476732735785400, 47.95995918884886300, -28.51837550109417300 ) ) ; +#78166 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 28.74722181384564800, -28.70555803802998100 ) ) ; +#78167 = CARTESIAN_POINT ( 'NONE', ( -8.077747210701865300, 65.79999999999998300, -28.70555803802997700 ) ) ; +#78168 = AXIS2_PLACEMENT_3D ( 'NONE', #1694, #45182, #7954 ) ; +#78169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78170 = CARTESIAN_POINT ( 'NONE', ( 8.899882735204320400, 35.05000000000000400, -28.53808257741932400 ) ) ; +#78171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78173 = CARTESIAN_POINT ( 'NONE', ( -24.76321441095520400, 98.15415480984205500, -20.91533303957041300 ) ) ; +#78174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78175 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#78176 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.20555803802997700 ) ) ; +#78177 = AXIS2_PLACEMENT_3D ( 'NONE', #75352, #38065, #804 ) ; +#78178 = CARTESIAN_POINT ( 'NONE', ( -3.516847196507520300, 18.70543520232828200, -28.70555803802992800 ) ) ; +#78179 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56851, #63122, #1082, #44545 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104965475000, 0.0007670610367946080300 ), + .UNSPECIFIED. ) ; +#78180 = ORIENTED_EDGE ( 'NONE', *, *, #53392, .T. ) ; +#78181 = CARTESIAN_POINT ( 'NONE', ( 15.49872383880590100, 25.17103694117760800, -28.53160243214819000 ) ) ; +#78182 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78183 = CARTESIAN_POINT ( 'NONE', ( -3.885328517825239500, 60.16054007504465100, -28.34042301926880800 ) ) ; +#78184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78185 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39977, #46196, #8932, #52452 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838145341231500E-007, 0.0004559721418115796400 ), + .UNSPECIFIED. ) ; +#78186 = CARTESIAN_POINT ( 'NONE', ( 15.66025403784444800, 55.47903320442284800, -28.36604143581859100 ) ) ; +#78187 = ORIENTED_EDGE ( 'NONE', *, *, #38992, .T. ) ; +#78188 = ADVANCED_FACE ( 'NONE', ( #1486 ), #76862, .T. ) ; +#78189 = CIRCLE ( 'NONE', #16772, 10.00000000000009200 ) ; +#78190 = AXIS2_PLACEMENT_3D ( 'NONE', #1101, #13908, #1361 ) ; +#78191 = VERTEX_POINT ( 'NONE', #45821 ) ; +#78192 = CIRCLE ( 'NONE', #72233, 10.00000000000009600 ) ; +#78193 = EDGE_LOOP ( 'NONE', ( #50392, #55014, #11181, #69061 ) ) ; +#78194 = CIRCLE ( 'NONE', #54818, 10.50000000000009600 ) ; +#78195 = EDGE_LOOP ( 'NONE', ( #35965, #57709, #36875, #31738 ) ) ; +#78196 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78197 = VERTEX_POINT ( 'NONE', #8572 ) ; +#78198 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 60.66666666666667100, 2.794441961969992100 ) ) ; +#78199 = AXIS2_PLACEMENT_3D ( 'NONE', #43454, #6208, #49689 ) ; +#78200 = FACE_OUTER_BOUND ( 'NONE', #46665, .T. ) ; +#78201 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 33.87738371066728100, -28.70555803802996700 ) ) ; +#78202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78203 = EDGE_CURVE ( 'NONE', #66062, #5650, #18052, .T. ) ; +#78204 = FACE_OUTER_BOUND ( 'NONE', #20729, .T. ) ; +#78205 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78206 = ORIENTED_EDGE ( 'NONE', *, *, #74437, .F. ) ; +#78207 = LINE ( 'NONE', #24898, #12023 ) ; +#78208 = AXIS2_PLACEMENT_3D ( 'NONE', #55529, #18282, #61813 ) ; +#78209 = EDGE_LOOP ( 'NONE', ( #55028, #44439, #922, #28921 ) ) ; +#78210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78211 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999996400, 54.83333333333332900, -3.349151577478988200 ) ) ; +#78212 = ORIENTED_EDGE ( 'NONE', *, *, #26444, .T. ) ; +#78213 = ORIENTED_EDGE ( 'NONE', *, *, #51718, .T. ) ; +#78214 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#78215 = VERTEX_POINT ( 'NONE', #52073 ) ; +#78216 = CIRCLE ( 'NONE', #45479, 10.50000000000009600 ) ; +#78217 = ORIENTED_EDGE ( 'NONE', *, *, #36639, .F. ) ; +#78218 = CARTESIAN_POINT ( 'NONE', ( -6.285714285714275800, 77.92318720225497900, -28.70555803802997700 ) ) ; +#78219 = CARTESIAN_POINT ( 'NONE', ( 3.357134060507625400, 10.52620220503712600, -28.70555803802992800 ) ) ; +#78220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78221 = CARTESIAN_POINT ( 'NONE', ( -10.11467148217474600, 80.16054007504463600, -28.34042301926880800 ) ) ; +#78222 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063261200, 20.59789380924897300, -28.25343951603328200 ) ) ; +#78223 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 32.00000000000000700, -1.205558038030002800 ) ) ; +#78224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78225 = EDGE_LOOP ( 'NONE', ( #46449, #11796, #20821, #63402 ) ) ; +#78226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78227 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510345200, 39.15930907398619400, -28.35186440610857500 ) ) ; +#78228 = EDGE_CURVE ( 'NONE', #1355, #61295, #60772, .T. ) ; +#78229 = CARTESIAN_POINT ( 'NONE', ( 17.30183166260285400, 69.84162552338045800, -28.43755849160219600 ) ) ; +#78230 = ORIENTED_EDGE ( 'NONE', *, *, #71258, .F. ) ; +#78231 = CONICAL_SURFACE ( 'NONE', #48678, 10.50000000000009600, 0.7853981633974518300 ) ; +#78232 = EDGE_CURVE ( 'NONE', #2862, #2762, #65754, .T. ) ; +#78233 = CARTESIAN_POINT ( 'NONE', ( 11.51272810170965100, 81.47860083896958400, -28.56001287362866800 ) ) ; +#78234 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#78235 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 12.17681279774499500, -28.70555803802994200 ) ) ; +#78236 = EDGE_CURVE ( 'NONE', #24026, #1761, #34610, .T. ) ; +#78237 = ADVANCED_FACE ( 'NONE', ( #53069 ), #30705, .F. ) ; +#78238 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 23.13556610137282000, -28.54207364681941100 ) ) ; +#78239 = CARTESIAN_POINT ( 'NONE', ( 10.86785381510902800, 18.47143078992671100, -28.37063977681193400 ) ) ; +#78240 = EDGE_CURVE ( 'NONE', #13603, #74849, #46248, .T. ) ; +#78241 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23853, #79597, #73611, #36332 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866978315000E-007, 0.001076778502991521100 ), + .UNSPECIFIED. ) ; +#78242 = AXIS2_PLACEMENT_3D ( 'NONE', #61509, #24229, #67744 ) ; +#78243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78244 = CARTESIAN_POINT ( 'NONE', ( -17.06455573922493200, 61.50962196508507400, -28.29483400905883500 ) ) ; +#78245 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 66.50000000000001400, -4.865812075874393000 ) ) ; +#78246 = CONICAL_SURFACE ( 'NONE', #15890, 10.50000000000009200, 0.7853981633974482800 ) ; +#78247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78248 = CARTESIAN_POINT ( 'NONE', ( 16.96374489182025500, 71.65075715145216900, -28.20555803803047800 ) ) ; +#78249 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846306100, 70.79999999999998300, -28.55171188418376000 ) ) ; +#78250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78251 = EDGE_LOOP ( 'NONE', ( #50201, #48580, #41108, #30587 ) ) ; +#78252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78253 = ADVANCED_FACE ( 'NONE', ( #16102 ), #47200, .T. ) ; +#78254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78257 = AXIS2_PLACEMENT_3D ( 'NONE', #13387, #7342, #26163 ) ; +#78258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78259 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #59354, #15833, #28402, #71878 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697630884800E-007, 0.0008724363063899973400 ), + .UNSPECIFIED. ) ; +#78261 = ORIENTED_EDGE ( 'NONE', *, *, #54568, .T. ) ; +#78260 = EDGE_CURVE ( 'NONE', #36928, #16097, #31840, .T. ) ; +#78262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78263 = EDGE_CURVE ( 'NONE', #52802, #26492, #17368, .T. ) ; +#78264 = EDGE_CURVE ( 'NONE', #58176, #20847, #4000, .T. ) ; +#78265 = ORIENTED_EDGE ( 'NONE', *, *, #53677, .F. ) ; +#78266 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919780600, 80.37705528805041400, -28.20555803803047800 ) ) ; +#78267 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#78268 = FACE_OUTER_BOUND ( 'NONE', #50884, .T. ) ; +#78269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78270 = ORIENTED_EDGE ( 'NONE', *, *, #34902, .F. ) ; +#78271 = CARTESIAN_POINT ( 'NONE', ( 16.02443482362734900, 64.03471854269724900, -28.66119098264625400 ) ) ; +#78272 = CARTESIAN_POINT ( 'NONE', ( -11.26652678188352400, 18.20564881207761900, -28.41114655922296700 ) ) ; +#78273 = CONICAL_SURFACE ( 'NONE', #55985, 10.50000000000009600, 0.7853981633974518300 ) ; +#78274 = ORIENTED_EDGE ( 'NONE', *, *, #41658, .F. ) ; +#78275 = AXIS2_PLACEMENT_3D ( 'NONE', #47318, #10101, #53617 ) ; +#78276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78277 = ADVANCED_FACE ( 'NONE', ( #63804 ), #45242, .T. ) ; +#78278 = ORIENTED_EDGE ( 'NONE', *, *, #20215, .F. ) ; +#78279 = CONICAL_SURFACE ( 'NONE', #1084, 10.00000000000009200, 0.7853981633974447300 ) ; +#78280 = CONICAL_SURFACE ( 'NONE', #16904, 10.50000000000009600, 0.7853981633974500600 ) ; +#78282 = ORIENTED_EDGE ( 'NONE', *, *, #54043, .T. ) ; +#78281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78283 = ORIENTED_EDGE ( 'NONE', *, *, #2800, .T. ) ; +#78284 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78285 = EDGE_CURVE ( 'NONE', #22091, #53696, #70311, .T. ) ; +#78286 = ORIENTED_EDGE ( 'NONE', *, *, #58353, .F. ) ; +#78287 = AXIS2_PLACEMENT_3D ( 'NONE', #34961, #78487, #41192 ) ; +#78288 = AXIS2_PLACEMENT_3D ( 'NONE', #71766, #71484, #15727 ) ; +#78289 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#78290 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194909500, 64.83849307182684600, -28.68631150211663100 ) ) ; +#78291 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007300, 52.97376207875005600, -28.70555803803047500 ) ) ; +#78292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58604, #15087, #71116, #33857 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572035817300E-007, 0.0007596410370203529600 ), + .UNSPECIFIED. ) ; +#78293 = CARTESIAN_POINT ( 'NONE', ( 11.01046273146249800, 51.25732391202375700, -28.20555803803030800 ) ) ; +#78294 = ADVANCED_FACE ( 'NONE', ( #32634 ), #12204, .F. ) ; +#78295 = CIRCLE ( 'NONE', #70624, 10.00000000000009400 ) ; +#78296 = ORIENTED_EDGE ( 'NONE', *, *, #18796, .T. ) ; +#78297 = CONICAL_SURFACE ( 'NONE', #56552, 10.00000000000009200, 0.7853981633974447300 ) ; +#78298 = CARTESIAN_POINT ( 'NONE', ( 10.88532851782547800, 80.16054007504448000, -28.34042301926906000 ) ) ; +#78299 = ORIENTED_EDGE ( 'NONE', *, *, #34869, .T. ) ; +#78300 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78301 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 3.666666666666686500, 8.320721403598824400 ) ) ; +#78302 = ORIENTED_EDGE ( 'NONE', *, *, #52623, .T. ) ; +#78303 = ORIENTED_EDGE ( 'NONE', *, *, #9843, .F. ) ; +#78304 = VERTEX_POINT ( 'NONE', #78218 ) ; +#78305 = ORIENTED_EDGE ( 'NONE', *, *, #32136, .T. ) ; +#78306 = CIRCLE ( 'NONE', #2726, 10.00000000000009400 ) ; +#78307 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 38.00000000000000700, -6.205558038030003100 ) ) ; +#78308 = AXIS2_PLACEMENT_3D ( 'NONE', #52576, #15350, #58852 ) ; +#78309 = ORIENTED_EDGE ( 'NONE', *, *, #77706, .T. ) ; +#78310 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#78311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78312 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78313 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 3.000000000000002700, -9.205558038030005700 ) ) ; +#78314 = VERTEX_POINT ( 'NONE', #3667 ) ; +#78315 = AXIS2_PLACEMENT_3D ( 'NONE', #51029, #63608, #20087 ) ; +#78316 = EDGE_LOOP ( 'NONE', ( #19825, #30251, #49418, #16701, #56867, #18662, #39017 ) ) ; +#78317 = CARTESIAN_POINT ( 'NONE', ( 9.177874716712134200, 44.44999999999808400, -2.069913605696986500 ) ) ; +#78318 = EDGE_CURVE ( 'NONE', #38936, #79655, #80332, .T. ) ; +#78319 = FACE_OUTER_BOUND ( 'NONE', #64621, .T. ) ; +#78320 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 40.33333333333334300, 8.320721403598817300 ) ) ; +#78321 = AXIS2_PLACEMENT_3D ( 'NONE', #15921, #59451, #22185 ) ; +#78322 = CARTESIAN_POINT ( 'NONE', ( -10.33039822051541600, 81.01872124563918500, -28.53757464917569900 ) ) ; +#78323 = AXIS2_PLACEMENT_3D ( 'NONE', #54722, #17479, #61005 ) ; +#78324 = CARTESIAN_POINT ( 'NONE', ( 14.71428571428573000, 47.42318720225497900, -28.70555803802996700 ) ) ; +#78325 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14887, #52111, #27427, #70903 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417465980609200E-007, 0.0004435563144346459200 ), + .UNSPECIFIED. ) ; +#78326 = CARTESIAN_POINT ( 'NONE', ( 3.242975574465595500, 60.16517473503391500, -28.29551658696701800 ) ) ; +#78327 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#78328 = CARTESIAN_POINT ( 'NONE', ( -2.955096376567155000, 30.74660241562189700, -28.20555803802995200 ) ) ; +#78329 = CARTESIAN_POINT ( 'NONE', ( -7.714285714285712600, 63.67681279774500800, -28.70555803802997700 ) ) ; +#78330 = AXIS2_PLACEMENT_3D ( 'NONE', #48605, #11395, #54884 ) ; +#78331 = CONICAL_SURFACE ( 'NONE', #11110, 10.00000000000009200, 0.7853981633974447300 ) ; +#78332 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 83.43454006867095500, -28.70555803803024400 ) ) ; +#78333 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#78334 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#78335 = CARTESIAN_POINT ( 'NONE', ( 9.881064473890852200, 61.10236277681496400, -28.32100408376070500 ) ) ; +#78336 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#78337 = CARTESIAN_POINT ( 'NONE', ( -13.05653207613409200, 9.792414212930760100, -28.70555803803002000 ) ) ; +#78338 = CARTESIAN_POINT ( 'NONE', ( -11.03590776526140600, 39.00212297965146700, -28.25344967589764500 ) ) ; +#78340 = ORIENTED_EDGE ( 'NONE', *, *, #58842, .T. ) ; +#78339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78341 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 90.34510448120794000, -28.37193179497697000 ) ) ; +#78342 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285728600, 22.67681279774500100, -28.70555803802995200 ) ) ; +#78343 = ORIENTED_EDGE ( 'NONE', *, *, #48166, .F. ) ; +#78344 = ADVANCED_FACE ( 'NONE', ( #28791 ), #43314, .T. ) ; +#78345 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#78346 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12640, #74912, #12911, #56388 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735935196400E-007, 0.0002745102201814179600 ), + .UNSPECIFIED. ) ; +#78347 = CARTESIAN_POINT ( 'NONE', ( -4.010462731462801900, 51.25732391202399200, -28.20555803802997700 ) ) ; +#78348 = PLANE ( 'NONE', #31230 ) ; +#78349 = CIRCLE ( 'NONE', #46883, 9.500000000000095900 ) ; +#78350 = FACE_OUTER_BOUND ( 'NONE', #18482, .T. ) ; +#78352 = EDGE_CURVE ( 'NONE', #39291, #67588, #55842, .T. ) ; +#78351 = ORIENTED_EDGE ( 'NONE', *, *, #67606, .T. ) ; +#78353 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 43.83333333333334300, -3.349151577478984600 ) ) ; +#78354 = PLANE ( 'NONE', #46438 ) ; +#78355 = EDGE_CURVE ( 'NONE', #15453, #14999, #41384, .T. ) ; +#78356 = FACE_OUTER_BOUND ( 'NONE', #14916, .T. ) ; +#78357 = CONICAL_SURFACE ( 'NONE', #29932, 10.50000000000009800, 0.7853981633974500600 ) ; +#78358 = VERTEX_POINT ( 'NONE', #59999 ) ; +#78359 = VERTEX_POINT ( 'NONE', #72507 ) ; +#78360 = CARTESIAN_POINT ( 'NONE', ( 3.040268958506433100, 9.875614624812458300, -28.30309985153372700 ) ) ; +#78361 = ADVANCED_FACE ( 'NONE', ( #76412 ), #10253, .F. ) ; +#78362 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.70555803802997700 ) ) ; +#78363 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 80.16054007504463600, -28.34042301926881500 ) ) ; +#78364 = CARTESIAN_POINT ( 'NONE', ( 1.872256045649985300, 57.15000000000015500, 6.631586531770874000 ) ) ; +#78365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43284, #62093, #38, #43548 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033213880061100E-007, 0.0006589639548288989300 ), + .UNSPECIFIED. ) ; +#78366 = EDGE_CURVE ( 'NONE', #57450, #47046, #26806, .T. ) ; +#78367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78368 = CIRCLE ( 'NONE', #15367, 10.00000000000009400 ) ; +#78369 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 36.70389005397393600, -28.37519436813181500 ) ) ; +#78370 = ORIENTED_EDGE ( 'NONE', *, *, #9951, .T. ) ; +#78371 = EDGE_CURVE ( 'NONE', #60356, #27463, #61856, .T. ) ; +#78372 = CONICAL_SURFACE ( 'NONE', #65428, 10.50000000000009600, 0.7853981633974500600 ) ; +#78373 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976200, 55.16666666666667100, -9.205558038030003900 ) ) ; +#78374 = EDGE_CURVE ( 'NONE', #3902, #39312, #26964, .T. ) ; +#78375 = ORIENTED_EDGE ( 'NONE', *, *, #10832, .T. ) ; +#78376 = ADVANCED_FACE ( 'NONE', ( #51086 ), #24846, .F. ) ; +#78377 = ORIENTED_EDGE ( 'NONE', *, *, #63032, .F. ) ; +#78378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78379 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 2, ( #3122, #59156, #77934, #40659, #3387, #46896, #9663, #53166, #15918, #59447, #22182, #65710, #28479, #71969, #34696, #78211, #40938, #3659, #47155, #9938, #53444, #16197, #59725, #22445, #65976, #28748, #72245, #34974, #78494, #41203, #3934, #47422, #10201, #53714, #16465, #59991, #22717, #66248, #29023, #72500, #35252, #79850, #42556, #5317, #48795, #11586, #55074, #17837, #61378, #24095, #67602, #30363, #73874, #36573, #80111, #42828, #5586, #49063, #11847, #55336, #18091, #61636, #24357, #67870, #30634, #74139, #36837, #80377, #43096, #5859, #49327, #12116, #55605, #18365, #61898, #24621, #68131, #30884, #74406 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3 ), + ( 0.1923572054591151400, 0.1944444444444444500, 0.1990740740740740700, 0.2037037037037036900, 0.2083333333333333400, 0.2129629629629629700, 0.2175925925925925900, 0.2222222222222222100, 0.2268518518518518600, 0.2314814814814814800, 0.2361111111111111000, 0.2407407407407407300, 0.2453703703703703800, 0.2500000000000000000, 0.2546296296296296500, 0.2592592592592592400, 0.2638888888888889000, 0.2685185185185185500, 0.2731481481481481400, 0.2777777777777777900, 0.2824074074074073800, 0.2870370370370370300, 0.2916666666666666900, 0.2962962962962962800, 0.3009259259259259300, 0.3055555555555555800, 0.3101851851851851700, 0.3148148148148148300, 0.3194444444444444200, 0.3240740740740740700, 0.3287037037037037200, 0.3333333333333333100, 0.3379629629629629700, 0.3425925925925926200, 0.3472222222222222100, 0.3518518518518518600, 0.3564814814814814500, 0.3611111111111111000, 0.3657407407407407600, 0.3687392006470106600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 0.9831275833774522100, 0.9846378761473335600, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9659258262890673100, 0.9999999999999990000, 0.9779312705583138600, 0.9844489316951360300 ) ) + REPRESENTATION_ITEM ( '' ) ); +#78380 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.20555803803014400 ) ) ; +#78381 = ORIENTED_EDGE ( 'NONE', *, *, #56931, .F. ) ; +#78382 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78384 = ADVANCED_FACE ( 'NONE', ( #57930 ), #35768, .T. ) ; +#78383 = VERTEX_POINT ( 'NONE', #29549 ) ; +#78385 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725287900, 14.05000000000000600, -28.20555803802992800 ) ) ; +#78386 = FACE_OUTER_BOUND ( 'NONE', #26252, .T. ) ; +#78387 = ORIENTED_EDGE ( 'NONE', *, *, #78432, .F. ) ; +#78388 = AXIS2_PLACEMENT_3D ( 'NONE', #74592, #37286, #32 ) ; +#78389 = EDGE_CURVE ( 'NONE', #20363, #5611, #74489, .T. ) ; +#78390 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000001600, 71.43250300240195800, -28.20555803803030800 ) ) ; +#78391 = EDGE_CURVE ( 'NONE', #23277, #37874, #12494, .T. ) ; +#78392 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69873, #26401, #63658, #32625 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.746674735304796300E-007, 0.0009376786059871707700 ), + .UNSPECIFIED. ) ; +#78393 = EDGE_CURVE ( 'NONE', #43201, #6774, #78825, .T. ) ; +#78394 = CARTESIAN_POINT ( 'NONE', ( 7.899665551839473400, 70.79999999999984100, -28.20555803803005200 ) ) ; +#78395 = ADVANCED_FACE ( 'NONE', ( #41373 ), #39413, .T. ) ; +#78396 = ORIENTED_EDGE ( 'NONE', *, *, #46481, .T. ) ; +#78397 = ORIENTED_EDGE ( 'NONE', *, *, #64103, .F. ) ; +#78398 = FACE_OUTER_BOUND ( 'NONE', #18275, .T. ) ; +#78399 = AXIS2_PLACEMENT_3D ( 'NONE', #53133, #15883, #22149 ) ; +#78400 = CARTESIAN_POINT ( 'NONE', ( 16.87500833472977700, 51.58737389638824300, -28.29936525552503900 ) ) ; +#78401 = ORIENTED_EDGE ( 'NONE', *, *, #32456, .F. ) ; +#78402 = CIRCLE ( 'NONE', #39761, 10.50000000000009900 ) ; +#78403 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 73.89610994602603000, -28.37519436813183700 ) ) ; +#78404 = AXIS2_PLACEMENT_3D ( 'NONE', #12813, #56285, #19039 ) ; +#78405 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 12.33333333333335500, 1.294441961969997200 ) ) ; +#78406 = AXIS2_PLACEMENT_3D ( 'NONE', #58880, #21652, #65172 ) ; +#78407 = AXIS2_PLACEMENT_3D ( 'NONE', #8639, #58161, #52143 ) ; +#78408 = CARTESIAN_POINT ( 'NONE', ( 3.968221961052078100, 51.31766786975327900, -28.25051428653855400 ) ) ; +#78409 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78410 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, 52.50000000000001400, 4.650848422521016300 ) ) ; +#78411 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78412 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000006900, 53.65857157145694600, -28.20555803802997700 ) ) ; +#78413 = FACE_OUTER_BOUND ( 'NONE', #49573, .T. ) ; +#78414 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#78415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78416 = EDGE_LOOP ( 'NONE', ( #12344, #57608, #56646, #1823 ) ) ; +#78417 = ORIENTED_EDGE ( 'NONE', *, *, #8376, .T. ) ; +#78418 = CIRCLE ( 'NONE', #47299, 10.50000000000009600 ) ; +#78419 = AXIS2_PLACEMENT_3D ( 'NONE', #68311, #74580, #24802 ) ; +#78420 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 22.20037755566824300, -28.53664883431607500 ) ) ; +#78421 = ORIENTED_EDGE ( 'NONE', *, *, #51365, .F. ) ; +#78422 = CARTESIAN_POINT ( 'NONE', ( 9.233092656309819900, 55.80000000000001800, -28.70555803802997700 ) ) ; +#78423 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #23994, #61261, #36459, #80006 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685177383126100E-007, 0.0005050261270285891400 ), + .UNSPECIFIED. ) ; +#78424 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 39.34510448120794700, -28.37193179497694500 ) ) ; +#78425 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999962300, 31.46823913367205300, -28.70555803802996700 ) ) ; +#78426 = CIRCLE ( 'NONE', #68241, 10.50000000000009600 ) ; +#78427 = CARTESIAN_POINT ( 'NONE', ( 3.064555739225104200, 81.50962196508486100, -28.29483400905898400 ) ) ; +#78428 = CIRCLE ( 'NONE', #9528, 10.50000000000009600 ) ; +#78429 = VERTEX_POINT ( 'NONE', #61074 ) ; +#78430 = CARTESIAN_POINT ( 'NONE', ( 3.516847196507555000, 40.89456479767167000, -28.70555803802996700 ) ) ; +#78431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78432 = EDGE_CURVE ( 'NONE', #3808, #45791, #72545, .T. ) ; +#78433 = CARTESIAN_POINT ( 'NONE', ( -17.91613173906789300, 17.92963663972535600, -28.27338767626449100 ) ) ; +#78434 = CONICAL_SURFACE ( 'NONE', #6229, 10.50000000000009600, 0.7853981633974500600 ) ; +#78435 = CARTESIAN_POINT ( 'NONE', ( -1.472335600148547000, 34.09761904761908400, -28.70555803802999500 ) ) ; +#78436 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#78437 = AXIS2_PLACEMENT_3D ( 'NONE', #24726, #68239, #30995 ) ; +#78438 = ORIENTED_EDGE ( 'NONE', *, *, #68109, .F. ) ; +#78439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78440 = CARTESIAN_POINT ( 'NONE', ( 17.20301974914531600, 71.82440674572720200, -28.45987523529583300 ) ) ; +#78441 = VERTEX_POINT ( 'NONE', #67313 ) ; +#78442 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472982400, 28.63131911501866600, -28.51286550264547900 ) ) ; +#78443 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985148300, 46.50238095238093200, -28.70555803802996700 ) ) ; +#78444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78445 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#78446 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#78447 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#78448 = FACE_OUTER_BOUND ( 'NONE', #35098, .T. ) ; +#78449 = CARTESIAN_POINT ( 'NONE', ( 4.230830694656881400, 80.65007990305416300, -28.43638873268729100 ) ) ; +#78450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78451 = CONICAL_SURFACE ( 'NONE', #67430, 10.50000000000009800, 0.7853981633974518300 ) ; +#78452 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.20555803802996700 ) ) ; +#78453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78455 = ORIENTED_EDGE ( 'NONE', *, *, #74797, .F. ) ; +#78456 = AXIS2_PLACEMENT_3D ( 'NONE', #74921, #37619, #370 ) ; +#78457 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#78458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78459 = VERTEX_POINT ( 'NONE', #17546 ) ; +#78460 = ORIENTED_EDGE ( 'NONE', *, *, #8521, .F. ) ; +#78461 = ORIENTED_EDGE ( 'NONE', *, *, #3514, .T. ) ; +#78462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78463 = ORIENTED_EDGE ( 'NONE', *, *, #69784, .F. ) ; +#78464 = PLANE ( 'NONE', #37486 ) ; +#78465 = ORIENTED_EDGE ( 'NONE', *, *, #24785, .T. ) ; +#78466 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.20555803802997700 ) ) ; +#78467 = CIRCLE ( 'NONE', #4646, 10.00000000000009400 ) ; +#78468 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000006700, 49.48922577050341000, -28.37255355648633800 ) ) ; +#78469 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.20555803802997700 ) ) ; +#78470 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55229, #11749, #67766, #30521 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003302471425251674600, 0.003631405919786732800 ), + .UNSPECIFIED. ) ; +#78471 = CARTESIAN_POINT ( 'NONE', ( -16.45968132316369600, 66.42850366851875800, -28.60315268788645300 ) ) ; +#78472 = ORIENTED_EDGE ( 'NONE', *, *, #71321, .T. ) ; +#78473 = AXIS2_PLACEMENT_3D ( 'NONE', #68818, #18782, #25327 ) ; +#78474 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 8.799999999999503300, -28.20555803803042500 ) ) ; +#78475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78476 = ORIENTED_EDGE ( 'NONE', *, *, #65027, .T. ) ; +#78477 = CONICAL_SURFACE ( 'NONE', #49746, 10.50000000000009600, 0.7853981633974518300 ) ; +#78478 = ORIENTED_EDGE ( 'NONE', *, *, #4250, .F. ) ; +#78479 = EDGE_CURVE ( 'NONE', #35675, #22450, #78402, .T. ) ; +#78480 = ORIENTED_EDGE ( 'NONE', *, *, #63970, .T. ) ; +#78481 = CONICAL_SURFACE ( 'NONE', #50099, 10.00000000000009600, 0.7853981633974447300 ) ; +#78482 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16478, #60000, #66256, #29031 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207981269700E-007, 0.0008724366121410526700 ), + .UNSPECIFIED. ) ; +#78483 = ADVANCED_FACE ( 'NONE', ( #8256 ), #54013, .F. ) ; +#78484 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 58.49999999999999300, -7.061964498581016200 ) ) ; +#78485 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 60.36203212531316400, -28.38801640354855500 ) ) ; +#78486 = ORIENTED_EDGE ( 'NONE', *, *, #50135, .T. ) ; +#78487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78488 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567158500, 18.35339758437810100, -28.20555803802992800 ) ) ; +#78489 = ADVANCED_FACE ( 'NONE', ( #59899 ), #20950, .F. ) ; +#78490 = EDGE_CURVE ( 'NONE', #13617, #31957, #64379, .T. ) ; +#78491 = EDGE_CURVE ( 'NONE', #78759, #67505, #14150, .T. ) ; +#78492 = CIRCLE ( 'NONE', #16231, 10.00000000000009600 ) ; +#78493 = EDGE_LOOP ( 'NONE', ( #42241, #79066, #52568 ) ) ; +#78494 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275521200, 52.66666666666667900, 2.794441961969994700 ) ) ; +#78495 = CIRCLE ( 'NONE', #9757, 10.50000000000009800 ) ; +#78496 = CARTESIAN_POINT ( 'NONE', ( -17.11467148217474900, 90.16054007504463600, -28.34042301926880800 ) ) ; +#78497 = ORIENTED_EDGE ( 'NONE', *, *, #47264, .T. ) ; +#78498 = ORIENTED_EDGE ( 'NONE', *, *, #41269, .T. ) ; +#78499 = CIRCLE ( 'NONE', #43611, 10.00000000000009600 ) ; +#78500 = AXIS2_PLACEMENT_3D ( 'NONE', #28703, #72189, #34924 ) ; +#78501 = EDGE_CURVE ( 'NONE', #7051, #52657, #6342, .T. ) ; +#78502 = EDGE_CURVE ( 'NONE', #74017, #57257, #49832, .T. ) ; +#78503 = EDGE_LOOP ( 'NONE', ( #11638, #40738, #30858 ) ) ; +#78504 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551300, 75.79999999999950000, -28.20555803803047800 ) ) ; +#78505 = EDGE_CURVE ( 'NONE', #21775, #69763, #22894, .T. ) ; +#78506 = CARTESIAN_POINT ( 'NONE', ( 16.48638455847728300, 92.34319227923863600, -28.59447410321735800 ) ) ; +#78508 = ADVANCED_FACE ( 'NONE', ( #55961 ), #18970, .F. ) ; +#78507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #50141, #6650, #68936, #31695 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002587550632199214300, 0.0009605145132141675500 ), + .UNSPECIFIED. ) ; +#78509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78510 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 29.83333333333333600, 1.741883078712340300 ) ) ; +#78511 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919941900, 28.87705528805140200, -28.20555803802994200 ) ) ; +#78512 = EDGE_CURVE ( 'NONE', #39609, #67038, #35439, .T. ) ; +#78513 = CONICAL_SURFACE ( 'NONE', #1972, 10.50000000000009600, 0.7853981633974482800 ) ; +#78514 = AXIS2_PLACEMENT_3D ( 'NONE', #70360, #76616, #26877 ) ; +#78515 = FACE_OUTER_BOUND ( 'NONE', #9900, .T. ) ; +#78516 = CARTESIAN_POINT ( 'NONE', ( -3.160449548280974700, 61.13768531620313200, -28.37082013777828500 ) ) ; +#78517 = ORIENTED_EDGE ( 'NONE', *, *, #34415, .F. ) ; +#78518 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 61.36762008758048400, -28.26633708900884300 ) ) ; +#78519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#78520 = ORIENTED_EDGE ( 'NONE', *, *, #78240, .F. ) ; +#78521 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78524 = ORIENTED_EDGE ( 'NONE', *, *, #40119, .T. ) ; +#78525 = AXIS2_PLACEMENT_3D ( 'NONE', #60030, #28786, #47450 ) ; +#78526 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#78527 = AXIS2_PLACEMENT_3D ( 'NONE', #57815, #20561, #64096 ) ; +#78528 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #43370, #80654, #12404, #55889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.969368287472575300E-017, 0.001492013864175037200 ), + .UNSPECIFIED. ) ; +#78529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78530 = CARTESIAN_POINT ( 'NONE', ( -2.733473218116569300, 49.70564881207770500, -28.41114655922290300 ) ) ; +#78531 = FACE_OUTER_BOUND ( 'NONE', #54792, .T. ) ; +#78532 = ORIENTED_EDGE ( 'NONE', *, *, #21444, .T. ) ; +#78533 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922184800, 64.33333333333334300, 1.294441961969997200 ) ) ; +#78534 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78535 = ORIENTED_EDGE ( 'NONE', *, *, #22120, .T. ) ; +#78536 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000091500, 15.94142842854307000, -28.20555803802992800 ) ) ; +#78537 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571355100, 10.02858243452107900, -28.70555803802994200 ) ) ; +#78538 = VERTEX_POINT ( 'NONE', #24865 ) ; +#78539 = CARTESIAN_POINT ( 'NONE', ( -9.844497922849305000, 41.32033471810044700, -28.30868034705252600 ) ) ; +#78540 = ORIENTED_EDGE ( 'NONE', *, *, #46888, .T. ) ; +#78541 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78542 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#78543 = CIRCLE ( 'NONE', #6782, 9.500000000000099500 ) ; +#78544 = CARTESIAN_POINT ( 'NONE', ( 10.94287326853378600, 10.29130857015004700, -28.37223374938535500 ) ) ; +#78545 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844491900, 86.13383585008146800, -28.37247596307096100 ) ) ; +#78546 = AXIS2_PLACEMENT_3D ( 'NONE', #67701, #30460, #73967 ) ; +#78548 = VERTEX_POINT ( 'NONE', #61873 ) ; +#78547 = CARTESIAN_POINT ( 'NONE', ( -15.96403123229864600, 9.957507269863676000, -28.66554294594906000 ) ) ; +#78549 = EDGE_CURVE ( 'NONE', #39046, #73484, #20971, .T. ) ; +#78550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78551 = ORIENTED_EDGE ( 'NONE', *, *, #42955, .F. ) ; +#78552 = CARTESIAN_POINT ( 'NONE', ( 11.92857142857144500, 31.02858243452105600, -28.70555803802996700 ) ) ; +#78553 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#78554 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999600, 57.70389005397393600, -28.37519436813184000 ) ) ; +#78555 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 70.79999999999998300, -28.20555803802997700 ) ) ; +#78556 = CIRCLE ( 'NONE', #37728, 10.00000000000009200 ) ; +#78557 = CARTESIAN_POINT ( 'NONE', ( 11.11891772579850400, 61.10238820582967600, -28.32098513914485900 ) ) ; +#78558 = ORIENTED_EDGE ( 'NONE', *, *, #76436, .F. ) ; +#78559 = CARTESIAN_POINT ( 'NONE', ( 17.32934156052462200, 51.13134338025910400, -28.43089930266685500 ) ) ; +#78560 = CARTESIAN_POINT ( 'NONE', ( 4.378021327471869600, 41.46868088498121800, -28.51286550264512700 ) ) ; +#78561 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78562 = EDGE_CURVE ( 'NONE', #68102, #51395, #35555, .T. ) ; +#78563 = ORIENTED_EDGE ( 'NONE', *, *, #11826, .T. ) ; +#78564 = VECTOR ( 'NONE', #19490, 1000.000000000000000 ) ; +#78565 = AXIS2_PLACEMENT_3D ( 'NONE', #72670, #72934, #60442 ) ; +#78566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36355, #73636, #5358, #48846 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589585392203916400E-007, 0.0003301092607755725600 ), + .UNSPECIFIED. ) ; +#78567 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78568 = FACE_OUTER_BOUND ( 'NONE', #74412, .T. ) ; +#78569 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.20555803803014400 ) ) ; +#78570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78571 = CARTESIAN_POINT ( 'NONE', ( -15.31403449022167400, 14.04999999999998100, -28.37321477197627200 ) ) ; +#78572 = ORIENTED_EDGE ( 'NONE', *, *, #23423, .T. ) ; +#78573 = ADVANCED_FACE ( 'NONE', ( #70567 ), #33577, .F. ) ; +#78574 = AXIS2_PLACEMENT_3D ( 'NONE', #17054, #23294, #54287 ) ; +#78575 = CARTESIAN_POINT ( 'NONE', ( 2.821853869768641100, 93.78469023269130400, -28.46719432058929300 ) ) ; +#78576 = CONICAL_SURFACE ( 'NONE', #64150, 10.50000000000009600, 0.7853981633974500600 ) ; +#78578 = VERTEX_POINT ( 'NONE', #74900 ) ; +#78577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78579 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 1.500000000000015300, -9.258116921287651700 ) ) ; +#78580 = ORIENTED_EDGE ( 'NONE', *, *, #11152, .T. ) ; +#78581 = ORIENTED_EDGE ( 'NONE', *, *, #33464, .F. ) ; +#78582 = ADVANCED_FACE ( 'NONE', ( #66679 ), #466, .F. ) ; +#78583 = CONICAL_SURFACE ( 'NONE', #70680, 10.00000000000009200, 0.7853981633974447300 ) ; +#78584 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155606000, 35.83333333333334300, 3.794441961969996900 ) ) ; +#78585 = AXIS2_PLACEMENT_3D ( 'NONE', #17582, #11593, #30115 ) ; +#78586 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78587 = CARTESIAN_POINT ( 'NONE', ( -2.964079643063254100, 49.50210619075100700, -28.25343951603330300 ) ) ; +#78588 = ORIENTED_EDGE ( 'NONE', *, *, #15185, .F. ) ; +#78589 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78590 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448970000, 0.8333333333333405900, 6.794441961969992500 ) ) ; +#78591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78592 = EDGE_CURVE ( 'NONE', #9262, #23287, #17046, .T. ) ; +#78593 = CIRCLE ( 'NONE', #48435, 9.500000000000099500 ) ; +#78594 = EDGE_LOOP ( 'NONE', ( #64784, #43062, #30419 ) ) ; +#78595 = CARTESIAN_POINT ( 'NONE', ( 6.087079090331144500, 44.44999999999995300, -8.444879763123395800 ) ) ; +#78596 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742346900, 38.16666666666668600, -12.20555803803000000 ) ) ; +#78597 = CARTESIAN_POINT ( 'NONE', ( 6.999999999999935200, 15.46443389862677800, -28.54207364681970600 ) ) ; +#78598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78599 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#78600 = VERTEX_POINT ( 'NONE', #19130 ) ; +#78601 = PLANE ( 'NONE', #5211 ) ; +#78602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78604 = ADVANCED_FACE ( 'NONE', ( #4382 ), #31643, .T. ) ; +#78603 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8019, #14303, #70309, #33053 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.085728438974832400E-007, 0.0007763347809200406000 ), + .UNSPECIFIED. ) ; +#78605 = CARTESIAN_POINT ( 'NONE', ( 2.254657264815485500, 10.00380841767820600, -28.64142799534452200 ) ) ; +#78606 = FACE_OUTER_BOUND ( 'NONE', #32169, .T. ) ; +#78607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78608 = LINE ( 'NONE', #10005, #30905 ) ; +#78610 = EDGE_CURVE ( 'NONE', #76759, #48534, #6488, .T. ) ; +#78609 = ORIENTED_EDGE ( 'NONE', *, *, #60050, .T. ) ; +#78611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78612 = ORIENTED_EDGE ( 'NONE', *, *, #44329, .F. ) ; +#78613 = ORIENTED_EDGE ( 'NONE', *, *, #28235, .F. ) ; +#78614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78615 = EDGE_CURVE ( 'NONE', #27096, #32513, #64754, .T. ) ; +#78616 = PLANE ( 'NONE', #10483 ) ; +#78617 = ORIENTED_EDGE ( 'NONE', *, *, #63409, .T. ) ; +#78618 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78619 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.70555803803030800 ) ) ; +#78620 = CARTESIAN_POINT ( 'NONE', ( -10.91801819451035100, 39.15930907398619400, -28.35186440610857900 ) ) ; +#78621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78622 = CARTESIAN_POINT ( 'NONE', ( 4.928571428571479500, 81.52858243452089900, -28.70555803803014400 ) ) ; +#78623 = ORIENTED_EDGE ( 'NONE', *, *, #27375, .T. ) ; +#78624 = EDGE_CURVE ( 'NONE', #76859, #66808, #72831, .T. ) ; +#78625 = CARTESIAN_POINT ( 'NONE', ( -11.23083069465696000, 60.94992009694571100, -28.43638873268704600 ) ) ; +#78626 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78628 = EDGE_CURVE ( 'NONE', #21831, #1543, #5667, .T. ) ; +#78629 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.20555803802995200 ) ) ; +#78630 = CONICAL_SURFACE ( 'NONE', #63286, 10.00000000000009200, 0.7853981633974447300 ) ; +#78631 = AXIS2_PLACEMENT_3D ( 'NONE', #5241, #11511, #42476 ) ; +#78632 = ORIENTED_EDGE ( 'NONE', *, *, #61217, .F. ) ; +#78633 = ORIENTED_EDGE ( 'NONE', *, *, #8641, .T. ) ; +#78634 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 41.66666666666667100, 2.794441961969992100 ) ) ; +#78635 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.20555803802997700 ) ) ; +#78636 = ORIENTED_EDGE ( 'NONE', *, *, #52782, .F. ) ; +#78637 = CARTESIAN_POINT ( 'NONE', ( -16.89200254265456300, 61.32559822014179200, -28.29986836858017400 ) ) ; +#78638 = FACE_OUTER_BOUND ( 'NONE', #68527, .T. ) ; +#78639 = CARTESIAN_POINT ( 'NONE', ( 17.01424819686890500, 80.01994747561565200, -28.24986299608891100 ) ) ; +#78640 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78641 = AXIS2_PLACEMENT_3D ( 'NONE', #31175, #74680, #37374 ) ; +#78642 = CARTESIAN_POINT ( 'NONE', ( -2.233092656309832800, 85.79999999999988300, -28.70555803803014400 ) ) ; +#78643 = CARTESIAN_POINT ( 'NONE', ( -1.039915011250220700, 57.14999999999997000, 7.536872988257989000 ) ) ; +#78644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78646 = ORIENTED_EDGE ( 'NONE', *, *, #57972, .F. ) ; +#78645 = EDGE_CURVE ( 'NONE', #76771, #64482, #72019, .T. ) ; +#78647 = EDGE_CURVE ( 'NONE', #51437, #4381, #57539, .T. ) ; +#78648 = AXIS2_PLACEMENT_3D ( 'NONE', #41396, #47629, #78698 ) ; +#78649 = CARTESIAN_POINT ( 'NONE', ( 1.869858741100101300, 57.15000000000000600, 6.572849786732822600 ) ) ; +#78650 = FACE_OUTER_BOUND ( 'NONE', #18125, .T. ) ; +#78651 = ORIENTED_EDGE ( 'NONE', *, *, #11419, .T. ) ; +#78652 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.70555803802997700 ) ) ; +#78653 = CARTESIAN_POINT ( 'NONE', ( -17.24454976001813800, 8.877725119990932600, -28.45040264298921800 ) ) ; +#78654 = ORIENTED_EDGE ( 'NONE', *, *, #30110, .F. ) ; +#78655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64466, #20929, #70675, #33420 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052417466013347000E-007, 0.0004435563144346820700 ), + .UNSPECIFIED. ) ; +#78656 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#78657 = EDGE_LOOP ( 'NONE', ( #41402, #67445, #22494 ) ) ; +#78658 = CARTESIAN_POINT ( 'NONE', ( -2.550579058145747700, 90.93286564902769000, -28.65428819219289400 ) ) ; +#78659 = EDGE_CURVE ( 'NONE', #70920, #20052, #43049, .T. ) ; +#78660 = FACE_OUTER_BOUND ( 'NONE', #59668, .T. ) ; +#78661 = AXIS2_PLACEMENT_3D ( 'NONE', #46756, #9516, #53023 ) ; +#78662 = AXIS2_PLACEMENT_3D ( 'NONE', #69448, #32198, #75699 ) ; +#78663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78664 = ADVANCED_FACE ( 'NONE', ( #37443 ), #15080, .T. ) ; +#78665 = FACE_OUTER_BOUND ( 'NONE', #50618, .T. ) ; +#78666 = ORIENTED_EDGE ( 'NONE', *, *, #14042, .F. ) ; +#78667 = AXIS2_PLACEMENT_3D ( 'NONE', #28492, #47167, #59739 ) ; +#78668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78669 = ORIENTED_EDGE ( 'NONE', *, *, #75305, .F. ) ; +#78670 = ADVANCED_FACE ( 'NONE', ( #2416 ), #51157, .T. ) ; +#78671 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 10.16666666666667100, -2.545304000185620600 ) ) ; +#78672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78673 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#78674 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 50.33333333333334300, -5.205558038030008400 ) ) ; +#78675 = FACE_OUTER_BOUND ( 'NONE', #7926, .T. ) ; +#78676 = FACE_OUTER_BOUND ( 'NONE', #31855, .T. ) ; +#78677 = AXIS2_PLACEMENT_3D ( 'NONE', #25059, #68574, #31331 ) ; +#78678 = VERTEX_POINT ( 'NONE', #20216 ) ; +#78679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78680 = ORIENTED_EDGE ( 'NONE', *, *, #16388, .F. ) ; +#78681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78682 = VERTEX_POINT ( 'NONE', #44910 ) ; +#78683 = ADVANCED_FACE ( 'NONE', ( #48140 ), #13159, .F. ) ; +#78684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#78685 = ORIENTED_EDGE ( 'NONE', *, *, #78986, .F. ) ; +#78686 = VERTEX_POINT ( 'NONE', #38942 ) ; +#78687 = EDGE_LOOP ( 'NONE', ( #58764, #75923, #40816 ) ) ; +#78688 = ORIENTED_EDGE ( 'NONE', *, *, #22734, .F. ) ; +#78689 = CARTESIAN_POINT ( 'NONE', ( 15.24268566510272600, 9.878657167448636800, -28.70261278770272600 ) ) ; +#78690 = CARTESIAN_POINT ( 'NONE', ( -16.99797127827573500, 20.31091476818473000, -28.25432823872344600 ) ) ; +#78691 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998600, 21.97376207875059600, -28.70555803802995200 ) ) ; +#78692 = AXIS2_PLACEMENT_3D ( 'NONE', #33292, #76810, #39545 ) ; +#78693 = ORIENTED_EDGE ( 'NONE', *, *, #80518, .F. ) ; +#78694 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#78695 = ADVANCED_FACE ( 'NONE', ( #79324 ), #60840, .F. ) ; +#78696 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#78697 = EDGE_CURVE ( 'NONE', #62053, #47599, #77368, .T. ) ; +#78698 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78699 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629300, 28.42298334620784700, -28.20555803802994200 ) ) ; +#78700 = ORIENTED_EDGE ( 'NONE', *, *, #54635, .F. ) ; +#78701 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#78702 = CONICAL_SURFACE ( 'NONE', #25102, 10.50000000000009600, 0.7853981633974500600 ) ; +#78703 = CARTESIAN_POINT ( 'NONE', ( -16.73347321811656800, 28.70564881207770100, -28.41114655922287500 ) ) ; +#78704 = EDGE_LOOP ( 'NONE', ( #80653, #57814, #12988 ) ) ; +#78705 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #72875, #35621, #79138, #41846 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983722279408100E-007, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#78706 = EDGE_LOOP ( 'NONE', ( #8770, #50396, #68595 ) ) ; +#78707 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 57.70389005397397900, -28.37519436813181500 ) ) ; +#78708 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.70555803802994200 ) ) ; +#78709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #69764, #26290, #38723, #1491 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202191357500E-007, 0.0008724366121407010600 ), + .UNSPECIFIED. ) ; +#78711 = CARTESIAN_POINT ( 'NONE', ( -2.881064473890917500, 70.49763722318510900, -28.32100408376079800 ) ) ; +#78712 = CIRCLE ( 'NONE', #78208, 9.500000000000095900 ) ; +#78713 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78714 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78716 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000002700, 44.37738371066728900, -28.70555803802997700 ) ) ; +#78717 = ORIENTED_EDGE ( 'NONE', *, *, #7298, .T. ) ; +#78718 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78719 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78720 = ORIENTED_EDGE ( 'NONE', *, *, #42460, .T. ) ; +#78721 = CARTESIAN_POINT ( 'NONE', ( 15.64690244143973400, 65.15853008474746800, -28.52629299565632700 ) ) ; +#78722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78723 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11314, #54802, #5311, #48790 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727635069800700E-007, 0.0008082706238602463800 ), + .UNSPECIFIED. ) ; +#78724 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78725 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655689600, 41.67701665379241400, -28.20555803802997400 ) ) ; +#78726 = EDGE_CURVE ( 'NONE', #10347, #56892, #62788, .T. ) ; +#78727 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.70555803802996700 ) ) ; +#78728 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 80.36203212531316400, -28.38801640354855800 ) ) ; +#78729 = FACE_OUTER_BOUND ( 'NONE', #29943, .T. ) ; +#78730 = VERTEX_POINT ( 'NONE', #76488 ) ; +#78731 = EDGE_CURVE ( 'NONE', #7843, #16633, #29715, .T. ) ; +#78732 = CARTESIAN_POINT ( 'NONE', ( 15.11625473641676900, 24.54999999999998600, -28.53994725305374700 ) ) ; +#78733 = ORIENTED_EDGE ( 'NONE', *, *, #1231, .F. ) ; +#78734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8929, #52448, #27757, #71249 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.007360964100849966600, 0.007639752840043633300 ), + .UNSPECIFIED. ) ; +#78736 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999986700, 18.16749699759768800, -28.20555803802992800 ) ) ; +#78737 = EDGE_CURVE ( 'NONE', #1950, #31625, #28659, .T. ) ; +#78738 = CARTESIAN_POINT ( 'NONE', ( -11.50476315846540800, 18.99920551340398600, -28.70555803802992800 ) ) ; +#78739 = EDGE_CURVE ( 'NONE', #40985, #34788, #46187, .T. ) ; +#78740 = AXIS2_PLACEMENT_3D ( 'NONE', #58089, #14845, #2303 ) ; +#78741 = CIRCLE ( 'NONE', #28633, 10.00000000000009200 ) ; +#78742 = CIRCLE ( 'NONE', #10377, 9.500000000000097700 ) ; +#78743 = ORIENTED_EDGE ( 'NONE', *, *, #76538, .F. ) ; +#78744 = VERTEX_POINT ( 'NONE', #45722 ) ; +#78745 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 56.33333333333334300, 5.722645192245503900 ) ) ; +#78746 = AXIS2_PLACEMENT_3D ( 'NONE', #41511, #22753, #72546 ) ; +#78747 = EDGE_CURVE ( 'NONE', #57912, #24293, #68629, .T. ) ; +#78748 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7649, #1419, #38651, #51147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001814799073964114700, 0.0005839769583123741600 ), + .UNSPECIFIED. ) ; +#78749 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.20555803802997700 ) ) ; +#78750 = EDGE_CURVE ( 'NONE', #36791, #76501, #50080, .T. ) ; +#78751 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78752 = EDGE_CURVE ( 'NONE', #62861, #49449, #14155, .T. ) ; +#78753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78754 = ADVANCED_FACE ( 'NONE', ( #44217 ), #9201, .F. ) ; +#78755 = CONICAL_SURFACE ( 'NONE', #61346, 10.50000000000009600, 0.7853981633974500600 ) ; +#78756 = ORIENTED_EDGE ( 'NONE', *, *, #16946, .F. ) ; +#78757 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78758 = CIRCLE ( 'NONE', #62554, 10.00000000000009200 ) ; +#78759 = VERTEX_POINT ( 'NONE', #77300 ) ; +#78760 = VERTEX_POINT ( 'NONE', #40043 ) ; +#78761 = AXIS2_PLACEMENT_3D ( 'NONE', #24117, #30123, #67623 ) ; +#78762 = ORIENTED_EDGE ( 'NONE', *, *, #39841, .F. ) ; +#78763 = CIRCLE ( 'NONE', #32968, 10.00000000000009400 ) ; +#78764 = EDGE_LOOP ( 'NONE', ( #49032, #72735, #17961 ) ) ; +#78765 = ORIENTED_EDGE ( 'NONE', *, *, #56765, .F. ) ; +#78766 = ORIENTED_EDGE ( 'NONE', *, *, #3333, .T. ) ; +#78767 = ORIENTED_EDGE ( 'NONE', *, *, #8299, .F. ) ; +#78768 = EDGE_LOOP ( 'NONE', ( #24048, #26785, #26733 ) ) ; +#78769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78770 = ORIENTED_EDGE ( 'NONE', *, *, #30271, .F. ) ; +#78771 = EDGE_CURVE ( 'NONE', #31778, #8064, #42293, .T. ) ; +#78772 = ADVANCED_FACE ( 'NONE', ( #27750 ), #40357, .T. ) ; +#78773 = AXIS2_PLACEMENT_3D ( 'NONE', #72098, #59283, #28594 ) ; +#78774 = ORIENTED_EDGE ( 'NONE', *, *, #15929, .F. ) ; +#78775 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 40.29999999999999000, -28.20555803802996700 ) ) ; +#78776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78777 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628819500, 27.66666666666667100, -6.705558038030000400 ) ) ; +#78778 = ORIENTED_EDGE ( 'NONE', *, *, #11229, .F. ) ; +#78779 = CIRCLE ( 'NONE', #21427, 9.500000000000099500 ) ; +#78780 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#78781 = ORIENTED_EDGE ( 'NONE', *, *, #48183, .T. ) ; +#78782 = VERTEX_POINT ( 'NONE', #77579 ) ; +#78783 = ADVANCED_FACE ( 'NONE', ( #58861 ), #7249, .F. ) ; +#78784 = VERTEX_POINT ( 'NONE', #3031 ) ; +#78785 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78786 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 41.43250300240230600, -28.20555803802997700 ) ) ; +#78787 = CARTESIAN_POINT ( 'NONE', ( -15.62012925194995600, 56.76150692817510200, -28.68631150211658100 ) ) ; +#78788 = ADVANCED_FACE ( 'NONE', ( #73467 ), #11198, .T. ) ; +#78789 = CIRCLE ( 'NONE', #28691, 10.00000000000009200 ) ; +#78790 = AXIS2_PLACEMENT_3D ( 'NONE', #49181, #11969, #55455 ) ; +#78791 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78792 = ORIENTED_EDGE ( 'NONE', *, *, #38500, .F. ) ; +#78793 = ADVANCED_FACE ( 'NONE', ( #23843 ), #21882, .F. ) ; +#78794 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999998900, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78795 = CARTESIAN_POINT ( 'NONE', ( -9.716823492900880800, 10.03732497909458700, -28.41043597897465400 ) ) ; +#78796 = AXIS2_PLACEMENT_3D ( 'NONE', #78414, #10133, #16395 ) ; +#78797 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 60.79999999999982700, -28.70555803803014400 ) ) ; +#78798 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#78799 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 62.16666666666666400, -2.545304000185620600 ) ) ; +#78800 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78801 = CIRCLE ( 'NONE', #55653, 10.00000000000009200 ) ; +#78802 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78803 = ORIENTED_EDGE ( 'NONE', *, *, #66463, .T. ) ; +#78804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78805 = CARTESIAN_POINT ( 'NONE', ( 15.44228214091547200, 16.52574874835184100, -28.70555803803004100 ) ) ; +#78806 = ORIENTED_EDGE ( 'NONE', *, *, #19275, .F. ) ; +#78807 = EDGE_LOOP ( 'NONE', ( #22147, #33553, #3188, #19698 ) ) ; +#78808 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150896600, 49.77966528189937600, -28.30868034705270700 ) ) ; +#78809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78810 = CARTESIAN_POINT ( 'NONE', ( -16.90473750965629000, 38.92298334620784300, -28.20555803802995200 ) ) ; +#78811 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78813 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349247700, 29.20543520232828500, -28.70555803802994200 ) ) ; +#78814 = CARTESIAN_POINT ( 'NONE', ( -17.41531457165533000, 81.18368596002119400, -28.40988208712491300 ) ) ; +#78815 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #51459, #7964, #39237, #1973 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.085598040246619500E-016, 0.001679852151211041900 ), + .UNSPECIFIED. ) ; +#78816 = CARTESIAN_POINT ( 'NONE', ( -6.240810944237157500, 50.54999999999999700, -28.47662666514796100 ) ) ; +#78817 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#78818 = AXIS2_PLACEMENT_3D ( 'NONE', #45774, #8530, #52034 ) ; +#78819 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 9.932503002402297600, -28.20555803802994200 ) ) ; +#78820 = CONICAL_SURFACE ( 'NONE', #16562, 10.50000000000009600, 0.7853981633974500600 ) ; +#78821 = CIRCLE ( 'NONE', #15010, 10.00000000000009200 ) ; +#78822 = CARTESIAN_POINT ( 'NONE', ( 4.036255108181464400, 89.94924284854707300, -28.20555803803014100 ) ) ; +#78823 = ORIENTED_EDGE ( 'NONE', *, *, #69406, .T. ) ; +#78824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78825 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4743, #67046, #5017, #48498 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962237572800, 0.0005195704752301040900 ), + .UNSPECIFIED. ) ; +#78826 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78827 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999999700, -28.20555803802997700 ) ) ; +#78828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78829 = ORIENTED_EDGE ( 'NONE', *, *, #45321, .T. ) ; +#78830 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31971, #50411, #44422, #7186 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611720050340400E-007, 0.0002592600401781018200 ), + .UNSPECIFIED. ) ; +#78831 = CARTESIAN_POINT ( 'NONE', ( 1.000574154678607800E-014, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78832 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 91.59999999999999400, -28.70555803803001300 ) ) ; +#78833 = CIRCLE ( 'NONE', #6045, 9.500000000000099500 ) ; +#78834 = EDGE_LOOP ( 'NONE', ( #31150, #69996, #60361, #14240, #41886 ) ) ; +#78835 = FACE_OUTER_BOUND ( 'NONE', #12902, .T. ) ; +#78836 = ORIENTED_EDGE ( 'NONE', *, *, #64301, .F. ) ; +#78837 = EDGE_CURVE ( 'NONE', #65338, #57282, #54953, .T. ) ; +#78838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78839 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78840 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.70555803802995200 ) ) ; +#78841 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, -0.6666666666666625200, 4.294441961970000500 ) ) ; +#78842 = ORIENTED_EDGE ( 'NONE', *, *, #69878, .F. ) ; +#78843 = FACE_OUTER_BOUND ( 'NONE', #15216, .T. ) ; +#78845 = EDGE_CURVE ( 'NONE', #13816, #33532, #80479, .T. ) ; +#78844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37334, #12092, #6359, #49843 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009872061318562655100, 0.001319946300100773700 ), + .UNSPECIFIED. ) ; +#78846 = ORIENTED_EDGE ( 'NONE', *, *, #5213, .T. ) ; +#78847 = ORIENTED_EDGE ( 'NONE', *, *, #77036, .F. ) ; +#78848 = ORIENTED_EDGE ( 'NONE', *, *, #21892, .F. ) ; +#78849 = EDGE_LOOP ( 'NONE', ( #51175, #62360, #23220, #57895 ) ) ; +#78851 = ORIENTED_EDGE ( 'NONE', *, *, #51520, .T. ) ; +#78850 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999984100, -28.20555803803014400 ) ) ; +#78852 = ORIENTED_EDGE ( 'NONE', *, *, #59647, .T. ) ; +#78853 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000005300, 33.66666666666667900, -5.535685056952199400 ) ) ; +#78854 = ORIENTED_EDGE ( 'NONE', *, *, #67790, .T. ) ; +#78855 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78856 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823697100, 21.40456253568401100, -28.61277292027076400 ) ) ; +#78857 = EDGE_CURVE ( 'NONE', #15059, #35498, #38382, .T. ) ; +#78858 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64836, #8746, #46005, #27564, #71053, #33798 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 6.938893903907228400E-018, 0.001038479869590360400, 0.002076959739180713800 ), + .UNSPECIFIED. ) ; +#78859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78860 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000003600, -1.333333333333325300, -8.133761268305512700 ) ) ; +#78861 = EDGE_CURVE ( 'NONE', #79988, #54555, #71518, .T. ) ; +#78862 = ORIENTED_EDGE ( 'NONE', *, *, #48994, .T. ) ; +#78863 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855216800, 83.67681279774477300, -28.70555803802997700 ) ) ; +#78864 = CONICAL_SURFACE ( 'NONE', #5196, 10.00000000000009400, 0.7853981633974447300 ) ; +#78865 = ORIENTED_EDGE ( 'NONE', *, *, #21411, .T. ) ; +#78866 = EDGE_CURVE ( 'NONE', #33691, #25149, #66023, .T. ) ; +#78867 = CARTESIAN_POINT ( 'NONE', ( -1.528382494088013300, 44.44999999999998900, -10.57681145224904800 ) ) ; +#78868 = ORIENTED_EDGE ( 'NONE', *, *, #56475, .F. ) ; +#78869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78870 = ORIENTED_EDGE ( 'NONE', *, *, #21900, .T. ) ; +#78871 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 35.99999999999999300, 9.794441961969996100 ) ) ; +#78872 = CARTESIAN_POINT ( 'NONE', ( 11.03625510818085700, 81.65075715145329100, -28.20555803803047800 ) ) ; +#78873 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499756400, 71.76337688193837000, -28.37223523914909200 ) ) ; +#78874 = CARTESIAN_POINT ( 'NONE', ( -14.23819945280405900, 12.15857157145700600, -28.37229765499279200 ) ) ; +#78875 = FACE_OUTER_BOUND ( 'NONE', #2384, .T. ) ; +#78876 = AXIS2_PLACEMENT_3D ( 'NONE', #46939, #9711, #53215 ) ; +#78877 = ORIENTED_EDGE ( 'NONE', *, *, #48896, .F. ) ; +#78878 = EDGE_CURVE ( 'NONE', #35539, #5287, #51503, .T. ) ; +#78879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78880 = EDGE_CURVE ( 'NONE', #12346, #10693, #37064, .T. ) ; +#78881 = EDGE_CURVE ( 'NONE', #17804, #43518, #75416, .T. ) ; +#78883 = ORIENTED_EDGE ( 'NONE', *, *, #77181, .F. ) ; +#78882 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#78884 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.70555803802997700 ) ) ; +#78885 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 4.999999999999995600, -18.70555803803001300 ) ) ; +#78886 = AXIS2_PLACEMENT_3D ( 'NONE', #37186, #24972, #11938 ) ; +#78887 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78888 = CONICAL_SURFACE ( 'NONE', #35327, 10.50000000000009800, 0.7853981633974518300 ) ; +#78889 = EDGE_LOOP ( 'NONE', ( #37858, #41415, #70929, #15745 ) ) ; +#78890 = CARTESIAN_POINT ( 'NONE', ( 17.22115791441229100, 41.43523632220588100, -28.30315276798567600 ) ) ; +#78891 = ORIENTED_EDGE ( 'NONE', *, *, #76199, .F. ) ; +#78892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78893 = CARTESIAN_POINT ( 'NONE', ( -18.12249899919930500, 79.91070809551060000, -28.20555803802997700 ) ) ; +#78894 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823697100, 21.40456253568401100, -28.61277292027076400 ) ) ; +#78895 = ADVANCED_FACE ( 'NONE', ( #25795 ), #3359, .F. ) ; +#78896 = AXIS2_PLACEMENT_3D ( 'NONE', #9940, #53457, #16206 ) ; +#78897 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78898 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #79132, #47534, #23105, #41841 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641859997136400E-007, 0.0008759659331881954800 ), + .UNSPECIFIED. ) ; +#78899 = ADVANCED_FACE ( 'NONE', ( #56925 ), #51012, .T. ) ; +#78900 = CARTESIAN_POINT ( 'NONE', ( -16.93414660040041000, 32.64286054144889000, -28.51850601323091200 ) ) ; +#78901 = CIRCLE ( 'NONE', #79235, 9.500000000000097700 ) ; +#78902 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 39.50000000000000700, -7.061964498581016200 ) ) ; +#78903 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489519400, 9.940690926013788300, -28.35186440610861400 ) ) ; +#78904 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#78905 = ORIENTED_EDGE ( 'NONE', *, *, #13070, .T. ) ; +#78906 = ORIENTED_EDGE ( 'NONE', *, *, #65080, .F. ) ; +#78907 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#78908 = CARTESIAN_POINT ( 'NONE', ( 13.10033444816026800, 70.79999999999968500, -28.20555803803023700 ) ) ; +#78909 = AXIS2_PLACEMENT_3D ( 'NONE', #10807, #60596, #48026 ) ; +#78910 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78911 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310704100, 80.10230989102886700, -28.61774594594300300 ) ) ; +#78912 = CARTESIAN_POINT ( 'NONE', ( -6.607302320435492100, 57.15000000000005500, 5.258861124920219500 ) ) ; +#78913 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78914 = ADVANCED_FACE ( 'NONE', ( #69547 ), #17976, .T. ) ; +#78915 = CIRCLE ( 'NONE', #20577, 9.500000000000097700 ) ; +#78916 = ORIENTED_EDGE ( 'NONE', *, *, #15225, .T. ) ; +#78917 = ORIENTED_EDGE ( 'NONE', *, *, #6031, .F. ) ; +#78918 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#78919 = EDGE_CURVE ( 'NONE', #10617, #66446, #22632, .T. ) ; +#78920 = FACE_OUTER_BOUND ( 'NONE', #49821, .T. ) ; +#78921 = CARTESIAN_POINT ( 'NONE', ( 16.62514415533964400, 9.187427922330183300, -28.57261973208896000 ) ) ; +#78922 = ORIENTED_EDGE ( 'NONE', *, *, #27383, .T. ) ; +#78923 = CARTESIAN_POINT ( 'NONE', ( -20.24377586602085800, 7.378112123506771700, -27.22041730175320500 ) ) ; +#78924 = AXIS2_PLACEMENT_3D ( 'NONE', #58600, #21361, #64895 ) ; +#78925 = ORIENTED_EDGE ( 'NONE', *, *, #76362, .F. ) ; +#78926 = CARTESIAN_POINT ( 'NONE', ( 15.05230528786095500, 75.75869881725272100, -28.70545453106903000 ) ) ; +#78927 = EDGE_LOOP ( 'NONE', ( #41908, #70541, #31207, #29226 ) ) ; +#78928 = ORIENTED_EDGE ( 'NONE', *, *, #17228, .F. ) ; +#78929 = CARTESIAN_POINT ( 'NONE', ( -9.653846153846297200, 50.79999999999999000, -28.55171188418377100 ) ) ; +#78930 = VERTEX_POINT ( 'NONE', #10660 ) ; +#78931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55202, #61500, #5714, #49193 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207966173500E-007, 0.0008724366121408865700 ), + .UNSPECIFIED. ) ; +#78932 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78933 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007100, 62.97376207875004900, -28.70555803803047500 ) ) ; +#78934 = CONICAL_SURFACE ( 'NONE', #1499, 10.00000000000009200, 0.7853981633974447300 ) ; +#78935 = AXIS2_PLACEMENT_3D ( 'NONE', #65578, #47014, #59579 ) ; +#78936 = ORIENTED_EDGE ( 'NONE', *, *, #64820, .F. ) ; +#78937 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929786500, 55.79999999999994700, -28.70555803803047500 ) ) ; +#78938 = ORIENTED_EDGE ( 'NONE', *, *, #48764, .F. ) ; +#78939 = ORIENTED_EDGE ( 'NONE', *, *, #3708, .T. ) ; +#78940 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3011, #40278, #52785, #15553 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.049985200913340900E-016, 0.001179148174662260900 ), + .UNSPECIFIED. ) ; +#78941 = ORIENTED_EDGE ( 'NONE', *, *, #29646, .T. ) ; +#78942 = ORIENTED_EDGE ( 'NONE', *, *, #40345, .F. ) ; +#78943 = VERTEX_POINT ( 'NONE', #16914 ) ; +#78944 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#78945 = CONICAL_SURFACE ( 'NONE', #59227, 10.00000000000009400, 0.7853981633974447300 ) ; +#78946 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 8.000000000000012400, -1.205558038030002800 ) ) ; +#78947 = EDGE_LOOP ( 'NONE', ( #54401, #10772, #62884 ) ) ; +#78948 = CARTESIAN_POINT ( 'NONE', ( 11.34615384615371300, 50.79999999999999000, -28.55171188418378100 ) ) ; +#78949 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.20555803802992800 ) ) ; +#78950 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 48.16666666666665700, 0.9380355014189834000 ) ) ; +#78951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78952 = CARTESIAN_POINT ( 'NONE', ( 9.892002542654369200, 70.27440177985805300, -28.29986836858037700 ) ) ; +#78953 = EDGE_CURVE ( 'NONE', #73200, #23738, #5328, .T. ) ; +#78954 = LINE ( 'NONE', #50837, #75036 ) ; +#78955 = EDGE_LOOP ( 'NONE', ( #35251, #70921, #44956, #20747 ) ) ; +#78956 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136756400, 69.92958814301768200, -28.27321389036166700 ) ) ; +#78957 = CARTESIAN_POINT ( 'NONE', ( -11.04490362343283200, 41.24660241562181500, -28.20555803802996700 ) ) ; +#78958 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#78959 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78961 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #58140, #45580, #45868, #8611 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003574755386345124300, 0.0008131256040090057300 ), + .UNSPECIFIED. ) ; +#78962 = ADVANCED_FACE ( 'NONE', ( #67611 ), #32557, .F. ) ; +#78963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78965 = CARTESIAN_POINT ( 'NONE', ( 16.80855915145251000, 51.86801718796557000, -28.34169759783737800 ) ) ; +#78966 = CARTESIAN_POINT ( 'NONE', ( 11.16173337320155000, 93.79966511081634900, -28.47535546536796900 ) ) ; +#78967 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78968 = EDGE_CURVE ( 'NONE', #10456, #19600, #8120, .T. ) ; +#78969 = EDGE_CURVE ( 'NONE', #26090, #58131, #52993, .T. ) ; +#78970 = CARTESIAN_POINT ( 'NONE', ( 12.92225278929801900, 75.79999999999969900, -28.70555803803047500 ) ) ; +#78971 = CARTESIAN_POINT ( 'NONE', ( -14.91754381105667300, 45.54999999999998300, -28.70555803802996700 ) ) ; +#78972 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78973 = ORIENTED_EDGE ( 'NONE', *, *, #17001, .T. ) ; +#78974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78975 = ORIENTED_EDGE ( 'NONE', *, *, #48227, .F. ) ; +#78976 = CARTESIAN_POINT ( 'NONE', ( 16.69595421660918100, 61.46283204837310200, -28.48697406221710100 ) ) ; +#78977 = EDGE_LOOP ( 'NONE', ( #66940, #7073, #71972, #69922, #43463 ) ) ; +#78978 = ADVANCED_FACE ( 'NONE', ( #65684 ), #63731, .F. ) ; +#78979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#78980 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#78981 = AXIS2_PLACEMENT_3D ( 'NONE', #63315, #7240, #32282 ) ; +#78982 = EDGE_CURVE ( 'NONE', #77587, #38925, #74496, .T. ) ; +#78983 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 80.79999999999968500, -28.20555803803030800 ) ) ; +#78984 = EDGE_CURVE ( 'NONE', #60902, #70590, #60045, .T. ) ; +#78985 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344303800, 49.42298334620756600, -28.20555803802996700 ) ) ; +#78986 = EDGE_CURVE ( 'NONE', #11715, #65, #80250, .T. ) ; +#78987 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #29043, #47722, #66526, #29309 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838336191357634600E-007, 0.0006649560044143933000 ), + .UNSPECIFIED. ) ; +#78988 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000009800, 67.94142842854307700, -28.20555803802997700 ) ) ; +#78989 = CARTESIAN_POINT ( 'NONE', ( -17.40084336938112100, 61.69277301236454700, -28.41361853548543300 ) ) ; +#78990 = CIRCLE ( 'NONE', #16898, 10.00000000000009200 ) ; +#78991 = PLANE ( 'NONE', #48219 ) ; +#78992 = EDGE_LOOP ( 'NONE', ( #34751, #13038, #36638 ) ) ; +#78993 = CARTESIAN_POINT ( 'NONE', ( -14.47629486627434900, 36.93535825203924400, -28.53896444442200300 ) ) ; +#78994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78995 = ORIENTED_EDGE ( 'NONE', *, *, #48651, .T. ) ; +#78996 = AXIS2_PLACEMENT_3D ( 'NONE', #43026, #36777, #18033 ) ; +#78997 = CARTESIAN_POINT ( 'NONE', ( 10.48315280349243400, 40.89456479767209600, -28.70555803802996700 ) ) ; +#78998 = EDGE_LOOP ( 'NONE', ( #39219, #47675, #52305, #67273 ) ) ; +#78999 = CIRCLE ( 'NONE', #46891, 9.500000000000099500 ) ; +#79000 = ORIENTED_EDGE ( 'NONE', *, *, #66788, .T. ) ; +#79002 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ; +#79001 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 69.98922577050341000, -28.37255355648633800 ) ) ; +#79003 = ORIENTED_EDGE ( 'NONE', *, *, #60270, .T. ) ; +#79004 = ORIENTED_EDGE ( 'NONE', *, *, #52236, .T. ) ; +#79005 = AXIS2_PLACEMENT_3D ( 'NONE', #37792, #534, #44029 ) ; +#79006 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79007 = AXIS2_PLACEMENT_3D ( 'NONE', #73369, #67103, #36104 ) ; +#79008 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#79009 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 53.65857157145701000, -28.20555803802997700 ) ) ; +#79010 = AXIS2_PLACEMENT_3D ( 'NONE', #54926, #17687, #61215 ) ; +#79011 = FACE_OUTER_BOUND ( 'NONE', #37658, .T. ) ; +#79012 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428212400, 51.52858243452108400, -28.70555803803014400 ) ) ; +#79013 = CARTESIAN_POINT ( 'NONE', ( 4.010462731463002600, 81.25732391202375000, -28.20555803803014400 ) ) ; +#79014 = ADVANCED_FACE ( 'NONE', ( #16026 ), #14074, .F. ) ; +#79015 = EDGE_LOOP ( 'NONE', ( #23470, #51068, #79315, #78938 ) ) ; +#79016 = VECTOR ( 'NONE', #6571, 1000.000000000000000 ) ; +#79017 = EDGE_LOOP ( 'NONE', ( #21389, #43678, #46716, #68713, #980 ) ) ; +#79018 = ORIENTED_EDGE ( 'NONE', *, *, #43541, .T. ) ; +#79019 = ORIENTED_EDGE ( 'NONE', *, *, #65806, .F. ) ; +#79020 = ORIENTED_EDGE ( 'NONE', *, *, #11033, .T. ) ; +#79021 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74516, #18753, #25009, #68528 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470526991065200E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#79022 = EDGE_LOOP ( 'NONE', ( #29674, #17890, #59307, #75874 ) ) ; +#79023 = CONICAL_SURFACE ( 'NONE', #72246, 10.00000000000009400, 0.7853981633974447300 ) ; +#79024 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 54.16666666666667100, -9.205558038030003900 ) ) ; +#79025 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#79026 = AXIS2_PLACEMENT_3D ( 'NONE', #77618, #9334, #34113 ) ; +#79027 = EDGE_CURVE ( 'NONE', #27806, #17173, #45510, .T. ) ; +#79028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79029 = CARTESIAN_POINT ( 'NONE', ( 6.761800547195760700, 73.65857157145708800, -28.37229765499300200 ) ) ; +#79030 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 68.16545993132821500, -28.70555803802999500 ) ) ; +#79031 = FACE_OUTER_BOUND ( 'NONE', #11236, .T. ) ; +#79032 = ORIENTED_EDGE ( 'NONE', *, *, #79275, .T. ) ; +#79033 = EDGE_CURVE ( 'NONE', #30036, #35236, #49073, .T. ) ; +#79034 = AXIS2_PLACEMENT_3D ( 'NONE', #3276, #34313, #52783 ) ; +#79035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79037 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#79038 = CARTESIAN_POINT ( 'NONE', ( 17.02315967650649900, 39.08087956867532900, -28.30223257055582000 ) ) ; +#79039 = PLANE ( 'NONE', #4149 ) ; +#79040 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257658500, 25.50000000000000700, 6.847000845227641200 ) ) ; +#79041 = CARTESIAN_POINT ( 'NONE', ( -15.85347128805686100, 36.68572799237468700, -28.67630847257079200 ) ) ; +#79042 = AXIS2_PLACEMENT_3D ( 'NONE', #25063, #68577, #31333 ) ; +#79043 = CARTESIAN_POINT ( 'NONE', ( -17.30183166260302500, 51.75837447661946600, -28.43755849160216100 ) ) ; +#79044 = CARTESIAN_POINT ( 'NONE', ( 3.568292696512263400, 61.99560977511676900, -28.70555803802997700 ) ) ; +#79045 = ORIENTED_EDGE ( 'NONE', *, *, #2206, .T. ) ; +#79046 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 45.83333333333335000, 0.9380355014189729600 ) ) ; +#79047 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181928500, 59.94924284854760500, -28.20555803803014400 ) ) ; +#79048 = CARTESIAN_POINT ( 'NONE', ( 11.30404578339033100, 61.46283204837305200, -28.48697406221690900 ) ) ; +#79050 = ORIENTED_EDGE ( 'NONE', *, *, #80522, .F. ) ; +#79049 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79051 = AXIS2_PLACEMENT_3D ( 'NONE', #76674, #39416, #2141 ) ; +#79052 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32842, #45317, #64160, #26883 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003355310104966989700, 0.0007670610367946052100 ), + .UNSPECIFIED. ) ; +#79053 = ADVANCED_FACE ( 'NONE', ( #30643 ), #28718, .F. ) ; +#79054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79055 = FACE_OUTER_BOUND ( 'NONE', #26189, .T. ) ; +#79056 = VERTEX_POINT ( 'NONE', #55215 ) ; +#79057 = CARTESIAN_POINT ( 'NONE', ( -16.69595421660942200, 71.46283204837338600, -28.48697406221667400 ) ) ; +#79058 = FACE_OUTER_BOUND ( 'NONE', #78416, .T. ) ; +#79060 = EDGE_CURVE ( 'NONE', #19952, #73086, #45156, .T. ) ; +#79059 = EDGE_LOOP ( 'NONE', ( #60831, #64356, #42580 ) ) ; +#79061 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999994700, 60.00000000000001400, -1.205558038030002800 ) ) ; +#79062 = CARTESIAN_POINT ( 'NONE', ( 24.45956414984537700, 0.5404358501551612700, -22.23742756933473800 ) ) ; +#79063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79064 = FACE_OUTER_BOUND ( 'NONE', #54400, .T. ) ; +#79065 = ORIENTED_EDGE ( 'NONE', *, *, #18554, .T. ) ; +#79066 = ORIENTED_EDGE ( 'NONE', *, *, #68816, .T. ) ; +#79067 = ORIENTED_EDGE ( 'NONE', *, *, #15327, .T. ) ; +#79068 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79069 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472979800, 49.63131911501867000, -28.51286550264550400 ) ) ; +#79070 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063277600, 20.59789380924897300, -28.25343951603328200 ) ) ; +#79071 = ADVANCED_FACE ( 'NONE', ( #61777 ), #30511, .T. ) ; +#79072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79073 = CARTESIAN_POINT ( 'NONE', ( -2.544299612921600700, 9.030944946791017000, -28.65917496040402700 ) ) ; +#79074 = FACE_OUTER_BOUND ( 'NONE', #76946, .T. ) ; +#79075 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79076 = PLANE ( 'NONE', #53708 ) ; +#79077 = VERTEX_POINT ( 'NONE', #11989 ) ; +#79078 = ORIENTED_EDGE ( 'NONE', *, *, #79812, .T. ) ; +#79079 = EDGE_CURVE ( 'NONE', #64099, #16633, #31119, .T. ) ; +#79080 = CIRCLE ( 'NONE', #48309, 10.50000000000009600 ) ; +#79081 = EDGE_LOOP ( 'NONE', ( #80629, #4539, #65122 ) ) ; +#79082 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79083 = ADVANCED_FACE ( 'NONE', ( #1410 ), #43240, .F. ) ; +#79084 = ORIENTED_EDGE ( 'NONE', *, *, #18213, .F. ) ; +#79085 = ORIENTED_EDGE ( 'NONE', *, *, #17720, .T. ) ; +#79086 = ORIENTED_EDGE ( 'NONE', *, *, #20477, .F. ) ; +#79087 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528040027300, 53.65857157145681800, -28.37229765499292000 ) ) ; +#79088 = FACE_OUTER_BOUND ( 'NONE', #22555, .T. ) ; +#79089 = ORIENTED_EDGE ( 'NONE', *, *, #39361, .T. ) ; +#79090 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 17.81066373133502300, -28.53923937255167000 ) ) ; +#79091 = FACE_OUTER_BOUND ( 'NONE', #62429, .T. ) ; +#79092 = AXIS2_PLACEMENT_3D ( 'NONE', #63193, #25932, #69410 ) ; +#79093 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#79094 = EDGE_CURVE ( 'NONE', #26122, #53616, #16644, .T. ) ; +#79095 = ADVANCED_FACE ( 'NONE', ( #78319 ), #10177, .T. ) ; +#79096 = VERTEX_POINT ( 'NONE', #68277 ) ; +#79097 = EDGE_CURVE ( 'NONE', #56207, #1236, #2144, .T. ) ; +#79098 = AXIS2_PLACEMENT_3D ( 'NONE', #23919, #67416, #30192 ) ; +#79099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#79100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79101 = CIRCLE ( 'NONE', #7512, 10.50000000000009800 ) ; +#79102 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571700, 22.67681279774499400, -28.70555803802995200 ) ) ; +#79103 = ORIENTED_EDGE ( 'NONE', *, *, #5816, .F. ) ; +#79104 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628824800, 66.33333333333334300, -6.705558038030005700 ) ) ; +#79105 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47748, #60311, #79070, #41766 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001469426634610523800, 0.0004765929656974042800 ), + .UNSPECIFIED. ) ; +#79106 = CARTESIAN_POINT ( 'NONE', ( -6.852157730108388000E-014, 43.65857157145693900, -28.20555803802997700 ) ) ; +#79107 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844382000, 31.50000000000001400, 2.454695999814385600 ) ) ; +#79108 = AXIS2_PLACEMENT_3D ( 'NONE', #69270, #32027, #75525 ) ; +#79109 = AXIS2_PLACEMENT_3D ( 'NONE', #28357, #46766, #40806 ) ; +#79110 = CARTESIAN_POINT ( 'NONE', ( -1.939071942967037300, 10.00000000000003700, -28.70555803802998100 ) ) ; +#79111 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000047800, 90.52242369685778600, -28.53861367218625800 ) ) ; +#79112 = EDGE_CURVE ( 'NONE', #42426, #45474, #34535, .T. ) ; +#79113 = CARTESIAN_POINT ( 'NONE', ( 2.881064473890882800, 61.10236277681498500, -28.32100408376067000 ) ) ; +#79114 = EDGE_CURVE ( 'NONE', #48987, #39773, #68497, .T. ) ; +#79115 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551006000, -3.499999999999980900, 4.650848422521016300 ) ) ; +#79116 = AXIS2_PLACEMENT_3D ( 'NONE', #61965, #24689, #68190 ) ; +#79117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79118 = CARTESIAN_POINT ( 'NONE', ( -8.563668193470285000, 44.45000000000160200, -4.787029383733694100 ) ) ; +#79119 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 90.79999999999982700, -28.70555803803014400 ) ) ; +#79120 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742354900, 33.83333333333333600, -12.20555803803000600 ) ) ; +#79121 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 20.24660241562189400, -28.20555803802994200 ) ) ; +#79122 = ORIENTED_EDGE ( 'NONE', *, *, #57620, .T. ) ; +#79123 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 60.79999999999999000, -28.20555803802997700 ) ) ; +#79124 = ORIENTED_EDGE ( 'NONE', *, *, #30644, .T. ) ; +#79125 = EDGE_CURVE ( 'NONE', #51007, #64333, #59826, .T. ) ; +#79126 = AXIS2_PLACEMENT_3D ( 'NONE', #8251, #51759, #14548 ) ; +#79127 = AXIS2_PLACEMENT_3D ( 'NONE', #34796, #78311, #41024 ) ; +#79128 = CARTESIAN_POINT ( 'NONE', ( -11.37802132747182800, 49.63131911501876200, -28.51286550264510900 ) ) ; +#79129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79130 = VERTEX_POINT ( 'NONE', #6534 ) ; +#79131 = CARTESIAN_POINT ( 'NONE', ( 4.720766503058108300, 80.09951448976264000, -28.63282631410032100 ) ) ; +#79132 = CARTESIAN_POINT ( 'NONE', ( -1.786765180256111300E-013, 74.37738371066707500, -28.70555803802997700 ) ) ; +#79133 = CARTESIAN_POINT ( 'NONE', ( 23.26365089063920200, 5.868284536824184300, -24.33880774750521100 ) ) ; +#79134 = FACE_OUTER_BOUND ( 'NONE', #65922, .T. ) ; +#79135 = EDGE_LOOP ( 'NONE', ( #58687, #13775, #50516, #17442 ) ) ; +#79136 = CIRCLE ( 'NONE', #44037, 10.00000000000009400 ) ; +#79137 = ORIENTED_EDGE ( 'NONE', *, *, #39856, .F. ) ; +#79138 = CARTESIAN_POINT ( 'NONE', ( -8.511022265274711200, 35.36787096422374800, -28.37244029424742900 ) ) ; +#79139 = ORIENTED_EDGE ( 'NONE', *, *, #29483, .T. ) ; +#79140 = FACE_OUTER_BOUND ( 'NONE', #62316, .T. ) ; +#79141 = CARTESIAN_POINT ( 'NONE', ( 8.472335600148836600, 25.50238095238052300, -28.70555803802994200 ) ) ; +#79142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79143 = ORIENTED_EDGE ( 'NONE', *, *, #53803, .F. ) ; +#79144 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999300, 41.35277818615431800, -28.70555803802999500 ) ) ; +#79145 = ORIENTED_EDGE ( 'NONE', *, *, #41538, .F. ) ; +#79146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79147 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79149 = CIRCLE ( 'NONE', #40502, 10.50000000000009800 ) ; +#79150 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70335, #76592, #14591, #58106 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.296157027441120200E-017, 0.001707792749031435500 ), + .UNSPECIFIED. ) ; +#79151 = ADVANCED_FACE ( 'NONE', ( #47128 ), #57848, .T. ) ; +#79152 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79154 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 57.60073525436789100, -28.70555803802999500 ) ) ; +#79155 = CARTESIAN_POINT ( 'NONE', ( 3.547857585644028400, 9.001892960388655500, -28.65770045238614500 ) ) ; +#79156 = ORIENTED_EDGE ( 'NONE', *, *, #56307, .T. ) ; +#79157 = AXIS2_PLACEMENT_3D ( 'NONE', #15954, #46919, #53196 ) ; +#79158 = FACE_OUTER_BOUND ( 'NONE', #55395, .T. ) ; +#79159 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 37.33333333333334300, 5.722645192245503900 ) ) ; +#79160 = ORIENTED_EDGE ( 'NONE', *, *, #12820, .F. ) ; +#79161 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925626800, 48.81967837323414000, -28.55467576046958200 ) ) ; +#79162 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11352, #54836, #5348, #48833 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565732876252800E-007, 0.0002592140922082521200 ), + .UNSPECIFIED. ) ; +#79163 = ORIENTED_EDGE ( 'NONE', *, *, #14615, .T. ) ; +#79164 = VERTEX_POINT ( 'NONE', #37783 ) ; +#79165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79166 = EDGE_LOOP ( 'NONE', ( #77184, #71038, #42567, #40966 ) ) ; +#79167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #35850, #17351, #36119, #79638 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.482279225946018500E-007, 0.001119324643800052600 ), + .UNSPECIFIED. ) ; +#79168 = FACE_OUTER_BOUND ( 'NONE', #72785, .T. ) ; +#79169 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79170 = ADVANCED_FACE ( 'NONE', ( #26735 ), #72476, .F. ) ; +#79171 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194923200, 56.76150692817307700, -28.68631150211662400 ) ) ; +#79172 = AXIS2_PLACEMENT_3D ( 'NONE', #43693, #6459, #49940 ) ; +#79173 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 73.67681279774500100, -28.70555803802997700 ) ) ; +#79174 = EDGE_LOOP ( 'NONE', ( #36111, #17555, #54682 ) ) ; +#79175 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79176 = CARTESIAN_POINT ( 'NONE', ( -9.446755628527833800, 57.14999999999998400, -1.890694502582230600 ) ) ; +#79177 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 80.79999999999998300, -28.70555803802997700 ) ) ; +#79178 = EDGE_CURVE ( 'NONE', #59944, #11162, #8180, .T. ) ; +#79180 = VERTEX_POINT ( 'NONE', #13079 ) ; +#79179 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #45873, #2361, #14905, #58422, #21174, #64701 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 6.834722437752129100E-016, 0.002059335602002400000, 0.004118671204004116500 ), + .UNSPECIFIED. ) ; +#79181 = ORIENTED_EDGE ( 'NONE', *, *, #37024, .F. ) ; +#79182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79184 = VERTEX_POINT ( 'NONE', #31302 ) ; +#79185 = ADVANCED_FACE ( 'NONE', ( #74415 ), #22818, .F. ) ; +#79186 = FACE_OUTER_BOUND ( 'NONE', #12574, .T. ) ; +#79187 = CARTESIAN_POINT ( 'NONE', ( -23.19475390705210000, 5.902621638154477600, -24.46746236131957600 ) ) ; +#79188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79189 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 36.22261628933271300, -28.70555803802995200 ) ) ; +#79190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79191 = CARTESIAN_POINT ( 'NONE', ( 1.851846210996311400, 55.79999999999999000, -28.37148172714571000 ) ) ; +#79192 = ADVANCED_FACE ( 'NONE', ( #76337 ), #70482, .T. ) ; +#79193 = CONICAL_SURFACE ( 'NONE', #31033, 10.00000000000009600, 0.7853981633974447300 ) ; +#79194 = EDGE_CURVE ( 'NONE', #31022, #46932, #6256, .T. ) ; +#79195 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000007100, 22.20037755566824000, -28.53664883431607500 ) ) ; +#79196 = EDGE_CURVE ( 'NONE', #9472, #22200, #54019, .T. ) ; +#79197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79198 = VERTEX_POINT ( 'NONE', #63106 ) ; +#79199 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 5.833333333333348100, 0.1341879241256075400 ) ) ; +#79200 = ORIENTED_EDGE ( 'NONE', *, *, #70957, .T. ) ; +#79201 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #67069, #42020, #11048, #29849 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.400203477792732600E-007, 0.0008990233139250863300 ), + .UNSPECIFIED. ) ; +#79202 = EDGE_CURVE ( 'NONE', #42265, #27548, #39567, .T. ) ; +#79203 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 46.00000000000001400, -1.205558038030005300 ) ) ; +#79204 = EDGE_CURVE ( 'NONE', #13617, #68463, #41299, .T. ) ; +#79205 = CIRCLE ( 'NONE', #53217, 10.50000000000009600 ) ; +#79206 = ORIENTED_EDGE ( 'NONE', *, *, #39754, .F. ) ; +#79207 = AXIS2_PLACEMENT_3D ( 'NONE', #53416, #16165, #59688 ) ; +#79208 = FACE_OUTER_BOUND ( 'NONE', #27189, .T. ) ; +#79209 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79210 = VERTEX_POINT ( 'NONE', #13622 ) ; +#79211 = CARTESIAN_POINT ( 'NONE', ( 3.885328517825477500, 70.16054007504466500, -28.34042301926890100 ) ) ; +#79212 = ORIENTED_EDGE ( 'NONE', *, *, #22777, .T. ) ; +#79213 = CONICAL_SURFACE ( 'NONE', #57934, 10.00000000000009200, 0.7853981633974447300 ) ; +#79214 = VERTEX_POINT ( 'NONE', #75591 ) ; +#79215 = EDGE_LOOP ( 'NONE', ( #16313, #4949, #1767, #12073 ) ) ; +#79216 = ORIENTED_EDGE ( 'NONE', *, *, #80079, .T. ) ; +#79217 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#79218 = AXIS2_PLACEMENT_3D ( 'NONE', #75610, #69358, #13369 ) ; +#79219 = EDGE_CURVE ( 'NONE', #38839, #79198, #25111, .T. ) ; +#79220 = EDGE_CURVE ( 'NONE', #56298, #16872, #24764, .T. ) ; +#79221 = EDGE_CURVE ( 'NONE', #13621, #61442, #10659, .T. ) ; +#79223 = FACE_OUTER_BOUND ( 'NONE', #75830, .T. ) ; +#79222 = AXIS2_PLACEMENT_3D ( 'NONE', #38945, #1691, #45176 ) ; +#79224 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.20555803802997700 ) ) ; +#79225 = ORIENTED_EDGE ( 'NONE', *, *, #55190, .T. ) ; +#79226 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#79227 = CONICAL_SURFACE ( 'NONE', #3403, 10.50000000000009800, 0.7853981633974518300 ) ; +#79228 = ORIENTED_EDGE ( 'NONE', *, *, #76060, .T. ) ; +#79229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79230 = CARTESIAN_POINT ( 'NONE', ( 10.11467148217489900, 81.43945992495517300, -28.34042301926894000 ) ) ; +#79231 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79232 = VERTEX_POINT ( 'NONE', #14134 ) ; +#79233 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79234 = VERTEX_POINT ( 'NONE', #57634 ) ; +#79235 = AXIS2_PLACEMENT_3D ( 'NONE', #43297, #6063, #49529 ) ; +#79236 = ORIENTED_EDGE ( 'NONE', *, *, #29056, .F. ) ; +#79237 = CARTESIAN_POINT ( 'NONE', ( 18.12249899919830700, 79.91070809551074200, -28.20555803803030800 ) ) ; +#79238 = EDGE_CURVE ( 'NONE', #41717, #30625, #76963, .T. ) ; +#79239 = FACE_OUTER_BOUND ( 'NONE', #10188, .T. ) ; +#79240 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#79241 = CARTESIAN_POINT ( 'NONE', ( -11.18082765632756000, 9.542716366279796200, -28.36017162544769100 ) ) ; +#79242 = AXIS2_PLACEMENT_3D ( 'NONE', #67579, #17817, #5291 ) ; +#79243 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#79244 = AXIS2_PLACEMENT_3D ( 'NONE', #6540, #50014, #12819 ) ; +#79245 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#79246 = CARTESIAN_POINT ( 'NONE', ( 2.343046065458664900, 89.08026449163853000, -28.70555803802998800 ) ) ; +#79247 = PLANE ( 'NONE', #22283 ) ; +#79248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79249 = ORIENTED_EDGE ( 'NONE', *, *, #73402, .F. ) ; +#79250 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 33.87738371066728100, -28.70555803802996700 ) ) ; +#79251 = VERTEX_POINT ( 'NONE', #63923 ) ; +#79252 = VERTEX_POINT ( 'NONE', #1862 ) ; +#79253 = CIRCLE ( 'NONE', #8539, 10.00000000000009200 ) ; +#79254 = CARTESIAN_POINT ( 'NONE', ( 15.31403449022169900, 24.54999999999998600, -28.37321477197628300 ) ) ; +#79255 = CARTESIAN_POINT ( 'NONE', ( -3.968221961052156300, 61.31766786975350700, -28.25051428653848300 ) ) ; +#79256 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428623100, 10.02858243452102000, -28.70555803802994200 ) ) ; +#79257 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 60.79999999999999000, -28.70555803802997700 ) ) ; +#79258 = CARTESIAN_POINT ( 'NONE', ( -2.989537268537164400, 51.25732391202397800, -28.20555803802997700 ) ) ; +#79259 = CARTESIAN_POINT ( 'NONE', ( 2.695954216609824300, 51.46283204837368400, -28.48697406221626200 ) ) ; +#79260 = CARTESIAN_POINT ( 'NONE', ( 4.346153846153558000, 80.79999999999984100, -28.55171188418395500 ) ) ; +#79261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39980, #77242, #65029, #27767 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215293267200E-007, 0.0007606633682806903000 ), + .UNSPECIFIED. ) ; +#79262 = AXIS2_PLACEMENT_3D ( 'NONE', #26856, #70343, #33099 ) ; +#79263 = CYLINDRICAL_SURFACE ( 'NONE', #60702, 10.00000000000000000 ) ; +#79264 = ORIENTED_EDGE ( 'NONE', *, *, #38650, .F. ) ; +#79265 = ADVANCED_FACE ( 'NONE', ( #39331 ), #68552, .T. ) ; +#79266 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 52.00000000000001400, 6.794441961969995200 ) ) ; +#79267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79268 = AXIS2_PLACEMENT_3D ( 'NONE', #30627, #17832, #74136 ) ; +#79269 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8576, #33621, #2590, #46100 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002606942962237504000, 0.0005195704752300855500 ), + .UNSPECIFIED. ) ; +#79270 = ORIENTED_EDGE ( 'NONE', *, *, #4674, .F. ) ; +#79271 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79273 = ORIENTED_EDGE ( 'NONE', *, *, #47146, .T. ) ; +#79272 = CARTESIAN_POINT ( 'NONE', ( -16.62080236467680500, 30.26893971292316000, -28.57333386111099600 ) ) ; +#79274 = ADVANCED_FACE ( 'NONE', ( #20869 ), #35479, .F. ) ; +#79275 = EDGE_CURVE ( 'NONE', #16691, #65181, #62509, .T. ) ; +#79276 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.70555803802996700 ) ) ; +#79277 = FACE_OUTER_BOUND ( 'NONE', #15282, .T. ) ; +#79278 = ORIENTED_EDGE ( 'NONE', *, *, #77337, .T. ) ; +#79279 = FACE_OUTER_BOUND ( 'NONE', #75573, .T. ) ; +#79280 = AXIS2_PLACEMENT_3D ( 'NONE', #74784, #37478, #240 ) ; +#79281 = ORIENTED_EDGE ( 'NONE', *, *, #68698, .F. ) ; +#79282 = ORIENTED_EDGE ( 'NONE', *, *, #57775, .F. ) ; +#79283 = CIRCLE ( 'NONE', #25053, 9.500000000000099500 ) ; +#79284 = CYLINDRICAL_SURFACE ( 'NONE', #61715, 5.000000000000000900 ) ; +#79285 = ORIENTED_EDGE ( 'NONE', *, *, #75586, .F. ) ; +#79286 = EDGE_LOOP ( 'NONE', ( #1873, #3468, #34979, #75139 ) ) ; +#79287 = ORIENTED_EDGE ( 'NONE', *, *, #31057, .T. ) ; +#79288 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79289 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14867, #8587, #21144, #64668 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815616938400E-007, 0.0007763385940577123200 ), + .UNSPECIFIED. ) ; +#79290 = PLANE ( 'NONE', #30030 ) ; +#79291 = CARTESIAN_POINT ( 'NONE', ( 13.28571428571421700, 87.92318720225442500, -28.70555803803047500 ) ) ; +#79292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79293 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999994700, 23.33333333333335000, -10.73183747965883100 ) ) ; +#79294 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719846000, 50.90033558196108000, -28.70555803802997700 ) ) ; +#79295 = CONICAL_SURFACE ( 'NONE', #13824, 10.50000000000009200, 0.7853981633974482800 ) ; +#79296 = ORIENTED_EDGE ( 'NONE', *, *, #46639, .F. ) ; +#79297 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#79298 = FACE_OUTER_BOUND ( 'NONE', #13037, .T. ) ; +#79299 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844487000, 65.79999999999982700, -28.20555803803014400 ) ) ; +#79300 = EDGE_CURVE ( 'NONE', #32213, #23277, #37368, .T. ) ; +#79301 = ORIENTED_EDGE ( 'NONE', *, *, #24963, .T. ) ; +#79302 = VERTEX_POINT ( 'NONE', #45625 ) ; +#79304 = EDGE_CURVE ( 'NONE', #54070, #32617, #51953, .T. ) ; +#79303 = VERTEX_POINT ( 'NONE', #27197 ) ; +#79305 = ORIENTED_EDGE ( 'NONE', *, *, #70351, .T. ) ; +#79306 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344544500, 10.17701665379220800, -28.20555803802993500 ) ) ; +#79307 = CARTESIAN_POINT ( 'NONE', ( 3.360598542614778900, 18.16749699759752400, -28.25434854811491500 ) ) ; +#79308 = ORIENTED_EDGE ( 'NONE', *, *, #70458, .T. ) ; +#79309 = CIRCLE ( 'NONE', #69941, 10.50000000000009600 ) ; +#79310 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390567900, 81.46283204837340000, -28.48697406221667400 ) ) ; +#79311 = ORIENTED_EDGE ( 'NONE', *, *, #9618, .T. ) ; +#79312 = EDGE_CURVE ( 'NONE', #33231, #14133, #48001, .T. ) ; +#79313 = CARTESIAN_POINT ( 'NONE', ( -20.07802431695812500, 101.6000000000000100, -18.81590112208399600 ) ) ; +#79314 = EDGE_CURVE ( 'NONE', #35044, #16084, #55885, .T. ) ; +#79315 = ORIENTED_EDGE ( 'NONE', *, *, #58697, .F. ) ; +#79316 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ; +#79317 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853718400, 60.34267608797617300, -28.20555803803014400 ) ) ; +#79318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79319 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000006200, 57.83333333333333600, 0.1341879241256075400 ) ) ; +#79320 = EDGE_CURVE ( 'NONE', #40091, #73336, #53943, .T. ) ; +#79321 = CARTESIAN_POINT ( 'NONE', ( 23.18391959032359800, 5.908040204838292700, -24.48497144683614800 ) ) ; +#79322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79323 = ORIENTED_EDGE ( 'NONE', *, *, #61239, .T. ) ; +#79324 = FACE_OUTER_BOUND ( 'NONE', #10637, .T. ) ; +#79325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79327 = CARTESIAN_POINT ( 'NONE', ( -4.002024496668882500, 49.78907889423216200, -28.25433304472396800 ) ) ; +#79328 = CARTESIAN_POINT ( 'NONE', ( 16.98953726853734000, 81.25732391202370800, -28.20555803803030800 ) ) ; +#79329 = CARTESIAN_POINT ( 'NONE', ( -4.780202711957519700, 17.00972971738994100, -28.70555803802993100 ) ) ; +#79330 = CARTESIAN_POINT ( 'NONE', ( -15.51102226527469500, 13.73928571352699500, -28.36868303842825500 ) ) ; +#79331 = AXIS2_PLACEMENT_3D ( 'NONE', #64533, #27260, #70741 ) ; +#79332 = EDGE_CURVE ( 'NONE', #3351, #36904, #4310, .T. ) ; +#79333 = EDGE_CURVE ( 'NONE', #49428, #73637, #12125, .T. ) ; +#79334 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53900, #22905, #54163, #16925 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.837565741034105000E-007, 0.0002592140922089885100 ), + .UNSPECIFIED. ) ; +#79335 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274713600, 14.05000000000000800, -28.20555803802992800 ) ) ; +#79336 = EDGE_CURVE ( 'NONE', #46654, #23185, #33585, .T. ) ; +#79337 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999995400, 10.68315603019280900, -28.70555803802998100 ) ) ; +#79338 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174749000, 51.43945992495533700, -28.34042301926881200 ) ) ; +#79339 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.70555803803014400 ) ) ; +#79340 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79341 = AXIS2_PLACEMENT_3D ( 'NONE', #15992, #34770, #53240 ) ; +#79342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79343 = CIRCLE ( 'NONE', #43356, 5.000000000000000900 ) ; +#79344 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609669700, 61.46283204837337200, -28.48697406221659300 ) ) ; +#79345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79347 = EDGE_CURVE ( 'NONE', #13206, #32803, #66605, .T. ) ; +#79348 = ORIENTED_EDGE ( 'NONE', *, *, #47120, .F. ) ; +#79349 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 29.79999999999999000, -28.20555803802995200 ) ) ; +#79350 = FACE_OUTER_BOUND ( 'NONE', #36631, .T. ) ; +#79351 = AXIS2_PLACEMENT_3D ( 'NONE', #13640, #57136, #19877 ) ; +#79352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79354 = CARTESIAN_POINT ( 'NONE', ( 2.452258779925632600, 21.28032162676581200, -28.55467576046954600 ) ) ; +#79356 = ORIENTED_EDGE ( 'NONE', *, *, #57155, .F. ) ; +#79355 = CARTESIAN_POINT ( 'NONE', ( 10.83955045171912000, 60.46231468379709600, -28.37082013777848000 ) ) ; +#79357 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#79358 = ADVANCED_FACE ( 'NONE', ( #18896 ), #48063, .F. ) ; +#79359 = FACE_OUTER_BOUND ( 'NONE', #25427, .T. ) ; +#79360 = FACE_OUTER_BOUND ( 'NONE', #67357, .T. ) ; +#79361 = ORIENTED_EDGE ( 'NONE', *, *, #23732, .F. ) ; +#79362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79363 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 80.10230989102912200, -28.61774594594330900 ) ) ; +#79364 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999300, 64.16666666666667100, 1.741883078712356500 ) ) ; +#79365 = CONICAL_SURFACE ( 'NONE', #38016, 10.50000000000009600, 0.7853981633974500600 ) ; +#79366 = ORIENTED_EDGE ( 'NONE', *, *, #14040, .F. ) ; +#79367 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#79368 = EDGE_LOOP ( 'NONE', ( #33302, #60479, #73532, #52987 ) ) ; +#79369 = ADVANCED_FACE ( 'NONE', ( #390 ), #15004, .F. ) ; +#79370 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922195400, 29.33333333333333900, -3.705558038030004400 ) ) ; +#79371 = AXIS2_PLACEMENT_3D ( 'NONE', #76173, #20171, #45125 ) ; +#79372 = CARTESIAN_POINT ( 'NONE', ( -12.88374526358323600, 35.04999999999998300, -28.53994725305376100 ) ) ; +#79373 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46137, #8880, #64977, #27700 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940576964900 ), + .UNSPECIFIED. ) ; +#79374 = CIRCLE ( 'NONE', #4023, 10.50000000000009600 ) ; +#79375 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79376 = CIRCLE ( 'NONE', #60172, 10.50000000000009600 ) ; +#79377 = AXIS2_PLACEMENT_3D ( 'NONE', #728, #44213, #6986 ) ; +#79378 = CARTESIAN_POINT ( 'NONE', ( 16.15629440873540500, 16.42044679784043400, -28.64059091698902600 ) ) ; +#79379 = ORIENTED_EDGE ( 'NONE', *, *, #69647, .T. ) ; +#79380 = ORIENTED_EDGE ( 'NONE', *, *, #66700, .F. ) ; +#79381 = CARTESIAN_POINT ( 'NONE', ( -7.915796098990403700, 44.44999999999999600, 2.423475159402512300 ) ) ; +#79382 = CARTESIAN_POINT ( 'NONE', ( 11.50476315846543300, 50.49920551340399300, -28.70555803802996700 ) ) ; +#79383 = EDGE_CURVE ( 'NONE', #67833, #74584, #19113, .T. ) ; +#79384 = ORIENTED_EDGE ( 'NONE', *, *, #76655, .T. ) ; +#79385 = CARTESIAN_POINT ( 'NONE', ( -5.499999999999987600, 31.66666666666667500, 8.320721403598824400 ) ) ; +#79386 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73180, #35898, #11160, #54656 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003346063178133325500, 0.0006016798664344121000 ), + .UNSPECIFIED. ) ; +#79387 = VERTEX_POINT ( 'NONE', #52983 ) ; +#79388 = AXIS2_PLACEMENT_3D ( 'NONE', #77575, #40287, #3026 ) ; +#79389 = ORIENTED_EDGE ( 'NONE', *, *, #29283, .F. ) ; +#79390 = PLANE ( 'NONE', #25917 ) ; +#79391 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 8.799999999999988300, -28.70555803802992800 ) ) ; +#79392 = ORIENTED_EDGE ( 'NONE', *, *, #42955, .T. ) ; +#79393 = FACE_OUTER_BOUND ( 'NONE', #52589, .T. ) ; +#79394 = AXIS2_PLACEMENT_3D ( 'NONE', #11972, #55457, #18218 ) ; +#79395 = VERTEX_POINT ( 'NONE', #71781 ) ; +#79396 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79397 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79398 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000001100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#79399 = ADVANCED_FACE ( 'NONE', ( #2327 ), #62700, .T. ) ; +#79400 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 71.23796787468680200, -28.38801640354855800 ) ) ; +#79401 = CARTESIAN_POINT ( 'NONE', ( 20.57092692123641700, 7.214591941427336500, -27.01040511901759800 ) ) ; +#79402 = CONICAL_SURFACE ( 'NONE', #9122, 10.00000000000009400, 0.7853981633974447300 ) ; +#79403 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 40.29999999999999000, -28.20555803802996700 ) ) ; +#79404 = ORIENTED_EDGE ( 'NONE', *, *, #10636, .F. ) ; +#79405 = CONICAL_SURFACE ( 'NONE', #5354, 10.50000000000009400, 0.7853981633974482800 ) ; +#79406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79408 = CARTESIAN_POINT ( 'NONE', ( 19.07754296731970100, 99.75511308203171300, -24.49371787645036100 ) ) ; +#79409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79410 = CARTESIAN_POINT ( 'NONE', ( -1.934216675714139900E-013, 63.65857157145704500, -28.20555803803014400 ) ) ; +#79411 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000000, 80.10252595950261400, -28.26641963845862500 ) ) ; +#79412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79413 = EDGE_CURVE ( 'NONE', #2597, #10390, #4651, .T. ) ; +#79414 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 35.16666666666665700, -9.205558038030003900 ) ) ; +#79415 = CONICAL_SURFACE ( 'NONE', #27203, 10.00000000000009200, 0.7853981633974447300 ) ; +#79416 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#79417 = EDGE_CURVE ( 'NONE', #80546, #80471, #31565, .T. ) ; +#79418 = CONICAL_SURFACE ( 'NONE', #45691, 10.50000000000009600, 0.7853981633974500600 ) ; +#79419 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999989300, 8.799999999999988300, -28.70555803802992800 ) ) ; +#79420 = ORIENTED_EDGE ( 'NONE', *, *, #59664, .T. ) ; +#79421 = CONICAL_SURFACE ( 'NONE', #42074, 10.00000000000009600, 0.7853981633974447300 ) ; +#79422 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 70.79999999999998300, -28.70555803802997700 ) ) ; +#79423 = CARTESIAN_POINT ( 'NONE', ( 5.488977734725305700, 35.05000000000000400, -28.20555803802995200 ) ) ; +#79424 = CARTESIAN_POINT ( 'NONE', ( 10.66960177948474000, 81.01872124563881500, -28.53757464917604700 ) ) ; +#79425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79426 = CARTESIAN_POINT ( 'NONE', ( -6.517797496492621100, 57.14999999999997000, -8.107796182626588100 ) ) ; +#79427 = EDGE_CURVE ( 'NONE', #12975, #72504, #70971, .T. ) ; +#79428 = CARTESIAN_POINT ( 'NONE', ( 15.07810594715582500, 65.79999999999982700, -28.70525300642874800 ) ) ; +#79429 = VERTEX_POINT ( 'NONE', #34795 ) ; +#79430 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64163, #20632, #70370, #33128 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002867161562547315200, 0.003513058538961174600 ), + .UNSPECIFIED. ) ; +#79431 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000040400, 61.43250300240213600, -28.20555803803014400 ) ) ; +#79432 = CIRCLE ( 'NONE', #15582, 10.50000000000009600 ) ; +#79433 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79434 = FACE_OUTER_BOUND ( 'NONE', #77397, .T. ) ; +#79435 = EDGE_CURVE ( 'NONE', #39312, #21619, #79253, .T. ) ; +#79436 = ORIENTED_EDGE ( 'NONE', *, *, #14059, .F. ) ; +#79437 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#79438 = EDGE_CURVE ( 'NONE', #53768, #74974, #16970, .T. ) ; +#79439 = CIRCLE ( 'NONE', #3588, 10.50000000000009800 ) ; +#79440 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79442 = ORIENTED_EDGE ( 'NONE', *, *, #17001, .F. ) ; +#79441 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79443 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.70555803803030800 ) ) ; +#79444 = ORIENTED_EDGE ( 'NONE', *, *, #28570, .T. ) ; +#79445 = CARTESIAN_POINT ( 'NONE', ( -7.476294866274330700, 12.16464174796073600, -28.53896444442197500 ) ) ; +#79446 = AXIS2_PLACEMENT_3D ( 'NONE', #43178, #80478, #24454 ) ; +#79447 = EDGE_CURVE ( 'NONE', #52976, #13337, #64666, .T. ) ; +#79448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79449 = EDGE_CURVE ( 'NONE', #15774, #4270, #33499, .T. ) ; +#79450 = EDGE_CURVE ( 'NONE', #26238, #51967, #50007, .T. ) ; +#79451 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 40.29999999999999000, -28.70555803802996700 ) ) ; +#79452 = FACE_OUTER_BOUND ( 'NONE', #26479, .T. ) ; +#79453 = ADVANCED_FACE ( 'NONE', ( #29634 ), #75335, .F. ) ; +#79454 = CIRCLE ( 'NONE', #35631, 9.500000000000097700 ) ; +#79455 = VERTEX_POINT ( 'NONE', #60357 ) ; +#79456 = AXIS2_PLACEMENT_3D ( 'NONE', #43936, #6702, #50191 ) ; +#79457 = ORIENTED_EDGE ( 'NONE', *, *, #51854, .T. ) ; +#79458 = CARTESIAN_POINT ( 'NONE', ( 0.2381994528039942400, 15.94142842854300700, -28.37229765499274200 ) ) ; +#79459 = ORIENTED_EDGE ( 'NONE', *, *, #31921, .T. ) ; +#79460 = ORIENTED_EDGE ( 'NONE', *, *, #66676, .F. ) ; +#79461 = CARTESIAN_POINT ( 'NONE', ( -4.502075021551483800, 90.99854748491394200, -28.70555803802997700 ) ) ; +#79462 = FACE_OUTER_BOUND ( 'NONE', #38991, .T. ) ; +#79463 = ADVANCED_FACE ( 'NONE', ( #77282 ), #42213, .F. ) ; +#79464 = CIRCLE ( 'NONE', #31676, 9.500000000000099500 ) ; +#79465 = AXIS2_PLACEMENT_3D ( 'NONE', #62214, #49643, #6176 ) ; +#79466 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 3.666666666666686500, -3.705558038030004400 ) ) ; +#79467 = AXIS2_PLACEMENT_3D ( 'NONE', #39481, #14476, #70489 ) ; +#79468 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11644, #48858, #24146, #67656 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881204029911300E-007, 0.0008724366121404667700 ), + .UNSPECIFIED. ) ; +#79469 = ORIENTED_EDGE ( 'NONE', *, *, #7092, .F. ) ; +#79470 = AXIS2_PLACEMENT_3D ( 'NONE', #3632, #65955, #40919 ) ; +#79471 = VERTEX_POINT ( 'NONE', #79110 ) ; +#79472 = CARTESIAN_POINT ( 'NONE', ( -16.32232026312764400, 9.997690108970898500, -28.61774594593776700 ) ) ; +#79473 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571436800, 61.52858243452105600, -28.70555803802997700 ) ) ; +#79474 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 43.83333333333334300, -3.349151577478984600 ) ) ; +#79475 = CIRCLE ( 'NONE', #42975, 10.00000000000009200 ) ; +#79476 = ORIENTED_EDGE ( 'NONE', *, *, #6280, .T. ) ; +#79477 = CARTESIAN_POINT ( 'NONE', ( -10.49952059719844800, 70.69966441803892100, -28.70555803802997700 ) ) ; +#79478 = ADVANCED_FACE ( 'NONE', ( #13073 ), #9114, .T. ) ; +#79479 = EDGE_LOOP ( 'NONE', ( #39793, #58725, #71811, #34337 ) ) ; +#79480 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609422400, 80.13716795162659400, -28.48697406221667400 ) ) ; +#79481 = VECTOR ( 'NONE', #49548, 1000.000000000000000 ) ; +#79482 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 9.000000000000007100, -1.205558038030005300 ) ) ; +#79483 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7792, #51280, #26607, #70080 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052076882729132600E-007, 0.0004435496461727858600 ), + .UNSPECIFIED. ) ; +#79484 = FACE_OUTER_BOUND ( 'NONE', #15427, .T. ) ; +#79485 = AXIS2_PLACEMENT_3D ( 'NONE', #62246, #24968, #68486 ) ; +#79486 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79487 = EDGE_CURVE ( 'NONE', #34604, #24389, #56510, .T. ) ; +#79488 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#79489 = ORIENTED_EDGE ( 'NONE', *, *, #43419, .T. ) ; +#79490 = ADVANCED_FACE ( 'NONE', ( #60766 ), #56838, .T. ) ; +#79491 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 25.96443389862717400, -28.54207364681939300 ) ) ; +#79492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79493 = CARTESIAN_POINT ( 'NONE', ( -11.12499166526974500, 71.58737389638851300, -28.29936525552453800 ) ) ; +#79494 = CONICAL_SURFACE ( 'NONE', #19309, 10.50000000000009600, 0.7853981633974500600 ) ; +#79495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#79496 = ORIENTED_EDGE ( 'NONE', *, *, #26072, .F. ) ; +#79497 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79498 = EDGE_CURVE ( 'NONE', #58920, #65, #73398, .T. ) ; +#79499 = FACE_OUTER_BOUND ( 'NONE', #72284, .T. ) ; +#79500 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79501 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 70.79999999999950000, -28.20555803803047800 ) ) ; +#79502 = AXIS2_PLACEMENT_3D ( 'NONE', #24107, #17849, #67615 ) ; +#79503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79504 = ORIENTED_EDGE ( 'NONE', *, *, #23671, .F. ) ; +#79505 = FACE_OUTER_BOUND ( 'NONE', #18068, .T. ) ; +#79506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79509 = ORIENTED_EDGE ( 'NONE', *, *, #60903, .F. ) ; +#79510 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#79511 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #16580, #53812, #29129, #72612 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001511800339341506900, 0.002290198854141488200 ), + .UNSPECIFIED. ) ; +#79512 = CARTESIAN_POINT ( 'NONE', ( -15.07810594715561500, 55.79999999999999000, -28.70525300642875200 ) ) ; +#79513 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 39.36203212531319200, -28.38801640354855500 ) ) ; +#79514 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 33.15857157145700300, -28.20555803802996700 ) ) ; +#79515 = CARTESIAN_POINT ( 'NONE', ( 10.98575180313151200, 70.01994747561603600, -28.24986299608874100 ) ) ; +#79516 = CIRCLE ( 'NONE', #38416, 10.50000000000009600 ) ; +#79517 = AXIS2_PLACEMENT_3D ( 'NONE', #17040, #73069, #29570 ) ; +#79518 = FACE_OUTER_BOUND ( 'NONE', #46226, .T. ) ; +#79519 = ORIENTED_EDGE ( 'NONE', *, *, #60492, .F. ) ; +#79520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79521 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79522 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 90.80000000000001100, -28.20555803802997700 ) ) ; +#79523 = CARTESIAN_POINT ( 'NONE', ( -13.76180054719593000, 77.94142842854297700, -28.37229765499282100 ) ) ; +#79524 = VERTEX_POINT ( 'NONE', #42075 ) ; +#79525 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79526 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, 18.16749699759737200, -28.20555803803025800 ) ) ; +#79527 = CARTESIAN_POINT ( 'NONE', ( -10.53518765398293600, 9.406791769321971600, -28.68794773163825000 ) ) ; +#79528 = AXIS2_PLACEMENT_3D ( 'NONE', #12989, #56472, #19217 ) ; +#79529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79530 = CONICAL_SURFACE ( 'NONE', #45953, 10.00000000000009400, 0.7853981633974447300 ) ; +#79531 = ORIENTED_EDGE ( 'NONE', *, *, #76473, .F. ) ; +#79532 = EDGE_CURVE ( 'NONE', #70364, #58395, #42036, .T. ) ; +#79533 = ORIENTED_EDGE ( 'NONE', *, *, #12615, .T. ) ; +#79534 = ORIENTED_EDGE ( 'NONE', *, *, #12111, .T. ) ; +#79535 = ORIENTED_EDGE ( 'NONE', *, *, #80640, .F. ) ; +#79536 = FACE_OUTER_BOUND ( 'NONE', #28915, .T. ) ; +#79537 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 49.83333333333335000, -9.205558038030003900 ) ) ; +#79538 = ORIENTED_EDGE ( 'NONE', *, *, #26430, .T. ) ; +#79539 = VERTEX_POINT ( 'NONE', #67128 ) ; +#79540 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#79541 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79542 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79543 = ADVANCED_FACE ( 'NONE', ( #58784 ), #7172, .F. ) ; +#79544 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655593200, 49.42298334620760900, -28.20555803802997400 ) ) ; +#79545 = FACE_OUTER_BOUND ( 'NONE', #73870, .T. ) ; +#79546 = ORIENTED_EDGE ( 'NONE', *, *, #24288, .F. ) ; +#79547 = EDGE_CURVE ( 'NONE', #34215, #40018, #27616, .T. ) ; +#79549 = EDGE_CURVE ( 'NONE', #12513, #17037, #13165, .T. ) ; +#79548 = ORIENTED_EDGE ( 'NONE', *, *, #24403, .T. ) ; +#79550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79551 = EDGE_LOOP ( 'NONE', ( #64627, #9844, #63348, #20209, #62133, #65436 ) ) ; +#79552 = CIRCLE ( 'NONE', #18821, 10.00000000000009600 ) ; +#79553 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21558, #77566, #15559, #59060 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037679649413278800E-007, 0.0007596411030280932500 ), + .UNSPECIFIED. ) ; +#79554 = FACE_OUTER_BOUND ( 'NONE', #38743, .T. ) ; +#79555 = ADVANCED_FACE ( 'NONE', ( #25720 ), #54875, .F. ) ; +#79556 = AXIS2_PLACEMENT_3D ( 'NONE', #77250, #77521, #33742 ) ; +#79557 = EDGE_CURVE ( 'NONE', #75377, #31068, #79468, .T. ) ; +#79558 = EDGE_CURVE ( 'NONE', #7051, #27733, #40276, .T. ) ; +#79559 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 60.79999999999967000, -28.20555803803030800 ) ) ; +#79561 = ORIENTED_EDGE ( 'NONE', *, *, #55321, .F. ) ; +#79560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#79563 = CARTESIAN_POINT ( 'NONE', ( 2.947441116742365500, 21.16666666666667900, 9.794441961969994300 ) ) ; +#79564 = CARTESIAN_POINT ( 'NONE', ( -17.37150777124396900, 71.43250300240228500, -28.25053031809458700 ) ) ; +#79565 = EDGE_CURVE ( 'NONE', #39193, #37576, #65018, .T. ) ; +#79566 = AXIS2_PLACEMENT_3D ( 'NONE', #27322, #58302, #64589 ) ; +#79567 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 61.82440674572816200, -28.45987523529581900 ) ) ; +#79568 = CONICAL_SURFACE ( 'NONE', #23990, 10.00000000000009400, 0.7853981633974447300 ) ; +#79569 = ORIENTED_EDGE ( 'NONE', *, *, #71480, .T. ) ; +#79570 = ADVANCED_FACE ( 'NONE', ( #44138 ), #5254, .F. ) ; +#79571 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79573 = CARTESIAN_POINT ( 'NONE', ( -3.114671482174618900, 81.43945992495534400, -28.34042301926885800 ) ) ; +#79574 = CONICAL_SURFACE ( 'NONE', #30575, 10.50000000000009600, 0.7853981633974500600 ) ; +#79575 = AXIS2_PLACEMENT_3D ( 'NONE', #54715, #48438, #11223 ) ; +#79576 = CARTESIAN_POINT ( 'NONE', ( 3.839550451719102600, 71.13768531620303300, -28.37082013777837000 ) ) ; +#79577 = AXIS2_PLACEMENT_3D ( 'NONE', #38462, #44698, #75748 ) ; +#79578 = VERTEX_POINT ( 'NONE', #30677 ) ; +#79579 = ADVANCED_FACE ( 'NONE', ( #71428 ), #36893, .T. ) ; +#79580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79581 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#79582 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79583 = FACE_OUTER_BOUND ( 'NONE', #26711, .T. ) ; +#79584 = CARTESIAN_POINT ( 'NONE', ( -4.330127018922187400, 55.66666666666667900, -3.705558038030004400 ) ) ; +#79585 = VERTEX_POINT ( 'NONE', #12172 ) ; +#79586 = CARTESIAN_POINT ( 'NONE', ( 17.51214229700728000, 4.975715405986013800, -27.37358685260334600 ) ) ; +#79587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79588 = CARTESIAN_POINT ( 'NONE', ( -10.64286593949244200, 31.52620220503753900, -28.70555803802995200 ) ) ; +#79589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79591 = ORIENTED_EDGE ( 'NONE', *, *, #53814, .F. ) ; +#79592 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79593 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823699600, 31.90456253568397200, -28.61277292027075700 ) ) ; +#79594 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000007300, 52.97376207875005600, -28.70555803803047500 ) ) ; +#79595 = EDGE_CURVE ( 'NONE', #19734, #61739, #38305, .T. ) ; +#79596 = CARTESIAN_POINT ( 'NONE', ( 0.9175438110566652700, 24.55000000000001100, -28.70555803802994200 ) ) ; +#79597 = CARTESIAN_POINT ( 'NONE', ( 1.511022265274727200, 35.36787096422378300, -28.37244029424745100 ) ) ; +#79598 = CARTESIAN_POINT ( 'NONE', ( -4.928571428571382600, 31.02858243452106600, -28.70555803802996700 ) ) ; +#79599 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77003, #14720, #64796, #27530 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.168695387257887800E-007, 0.0007987676590763812800 ), + .UNSPECIFIED. ) ; +#79600 = FACE_OUTER_BOUND ( 'NONE', #25630, .T. ) ; +#79601 = CARTESIAN_POINT ( 'NONE', ( -10.50047940280154900, 60.69966441803890000, -28.70555803802997700 ) ) ; +#79602 = CIRCLE ( 'NONE', #75639, 9.500000000000099500 ) ; +#79603 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343283900, 20.24660241562181900, -28.20555803802994200 ) ) ; +#79604 = ORIENTED_EDGE ( 'NONE', *, *, #59438, .F. ) ; +#79605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79607 = EDGE_LOOP ( 'NONE', ( #53921, #6184, #56871, #57112 ) ) ; +#79608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79609 = ORIENTED_EDGE ( 'NONE', *, *, #67045, .T. ) ; +#79610 = ORIENTED_EDGE ( 'NONE', *, *, #79897, .T. ) ; +#79611 = CARTESIAN_POINT ( 'NONE', ( 17.91666047136833500, 28.42958814301752200, -28.27321389036144300 ) ) ; +#79612 = AXIS2_PLACEMENT_3D ( 'NONE', #60337, #23061, #66572 ) ; +#79613 = ORIENTED_EDGE ( 'NONE', *, *, #62623, .F. ) ; +#79614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79617 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#79618 = ORIENTED_EDGE ( 'NONE', *, *, #4832, .F. ) ; +#79619 = CARTESIAN_POINT ( 'NONE', ( 9.964079643063266500, 39.00210619075101400, -28.25343951603329300 ) ) ; +#79620 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#79621 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 20.30277574221154800, -28.32715733700493000 ) ) ; +#79622 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39818, #64606, #8785, #52293 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.052472917670307500E-007, 0.0004089036991175709200 ), + .UNSPECIFIED. ) ; +#79624 = CIRCLE ( 'NONE', #17838, 10.00000000000009200 ) ; +#79625 = AXIS2_PLACEMENT_3D ( 'NONE', #5202, #54965, #60983 ) ; +#79626 = EDGE_LOOP ( 'NONE', ( #80316, #20942, #10782, #22163 ) ) ; +#79628 = EDGE_LOOP ( 'NONE', ( #44204, #60765, #39207, #6904 ) ) ; +#79627 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 90.80000000000001100, -28.20555803802997700 ) ) ; +#79629 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 62.00000000000002800, -1.205558038030002800 ) ) ; +#79630 = ORIENTED_EDGE ( 'NONE', *, *, #62751, .F. ) ; +#79631 = CARTESIAN_POINT ( 'NONE', ( 11.09526249034406200, 28.42298334620740300, -28.20555803802994500 ) ) ; +#79632 = CONICAL_SURFACE ( 'NONE', #76634, 10.50000000000009600, 0.7853981633974500600 ) ; +#79633 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 27.16666666666667500, 0.1341879241256129200 ) ) ; +#79634 = AXIS2_PLACEMENT_3D ( 'NONE', #48443, #54718, #4948 ) ; +#79635 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79637 = EDGE_LOOP ( 'NONE', ( #234, #47839, #42470, #19967 ) ) ; +#79638 = CARTESIAN_POINT ( 'NONE', ( -12.33974596215550400, 85.79999999999998300, -28.20555803802997700 ) ) ; +#79639 = CIRCLE ( 'NONE', #36941, 10.50000000000009600 ) ; +#79640 = EDGE_LOOP ( 'NONE', ( #12892, #62806, #57351 ) ) ; +#79641 = CARTESIAN_POINT ( 'NONE', ( -6.101146339308228600, 44.45000000000001700, 4.013928002800279100 ) ) ; +#79642 = CARTESIAN_POINT ( 'NONE', ( -15.07025710783655000, 9.859485784326885500, -28.70457077705549100 ) ) ; +#79643 = CARTESIAN_POINT ( 'NONE', ( 8.052558883257656700, 29.50000000000001800, -9.258116921287651700 ) ) ; +#79644 = ORIENTED_EDGE ( 'NONE', *, *, #65246, .T. ) ; +#79645 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6889, #44100, #617, #50362 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002678472193583155100, 0.0005865296644891685700 ), + .UNSPECIFIED. ) ; +#79646 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79647 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79648 = ORIENTED_EDGE ( 'NONE', *, *, #20849, .T. ) ; +#79649 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77319, #27311, #46268, #9024, #52544, #15316, #58815, #21587 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.001719839228549899000, 0.002579758842824848700, 0.003439678457099797900 ), + .UNSPECIFIED. ) ; +#79650 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180450100, 61.65075715145295000, -28.20555803802997700 ) ) ; +#79651 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.20555803802996700 ) ) ; +#79652 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -28.70555803803001300 ) ) ; +#79653 = CIRCLE ( 'NONE', #51998, 9.500000000000097700 ) ; +#79654 = EDGE_CURVE ( 'NONE', #15753, #10382, #50485, .T. ) ; +#79655 = VERTEX_POINT ( 'NONE', #61953 ) ; +#79656 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#79657 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 0.0000000000000000000, -18.70555803803001300 ) ) ; +#79658 = ORIENTED_EDGE ( 'NONE', *, *, #15348, .F. ) ; +#79659 = CARTESIAN_POINT ( 'NONE', ( 17.84709556909790600, 97.29419406284199600, -26.92606460560095300 ) ) ; +#79660 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#79661 = CARTESIAN_POINT ( 'NONE', ( 4.095262490344611100, 49.42298334620778600, -28.20555803802997400 ) ) ; +#79662 = ADVANCED_FACE ( 'NONE', ( #11116 ), #12442, .T. ) ; +#79663 = ADVANCED_FACE ( 'NONE', ( #21810 ), #3275, .T. ) ; +#79664 = CIRCLE ( 'NONE', #80614, 9.500000000000131500 ) ; +#79665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79667 = EDGE_CURVE ( 'NONE', #67193, #68175, #19851, .T. ) ; +#79668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79669 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79670 = CIRCLE ( 'NONE', #42753, 10.00000000000009400 ) ; +#79671 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ; +#79672 = AXIS2_PLACEMENT_3D ( 'NONE', #76109, #38827, #1577 ) ; +#79673 = EDGE_LOOP ( 'NONE', ( #24845, #6294, #2120 ) ) ; +#79674 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 33.00000000000001400, 6.794441961969995200 ) ) ; +#79675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79676 = ORIENTED_EDGE ( 'NONE', *, *, #57399, .F. ) ; +#79677 = FACE_OUTER_BOUND ( 'NONE', #71179, .T. ) ; +#79678 = ORIENTED_EDGE ( 'NONE', *, *, #46886, .F. ) ; +#79679 = ORIENTED_EDGE ( 'NONE', *, *, #58682, .F. ) ; +#79680 = EDGE_LOOP ( 'NONE', ( #26922, #30618, #10395, #58391, #69755 ) ) ; +#79681 = EDGE_LOOP ( 'NONE', ( #40843, #12342, #74004, #74078 ) ) ; +#79682 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 40.29999999999999000, -28.20555803802996700 ) ) ; +#79684 = ORIENTED_EDGE ( 'NONE', *, *, #63345, .T. ) ; +#79683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79685 = AXIS2_PLACEMENT_3D ( 'NONE', #74059, #36760, #80299 ) ; +#79686 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#79687 = CARTESIAN_POINT ( 'NONE', ( 2.131314901216975000, 57.14999999999980000, -10.23072671447201300 ) ) ; +#79688 = EDGE_CURVE ( 'NONE', #11286, #34970, #23766, .T. ) ; +#79689 = EDGE_CURVE ( 'NONE', #11977, #32854, #69469, .T. ) ; +#79690 = AXIS2_PLACEMENT_3D ( 'NONE', #66884, #60912, #48346 ) ; +#79691 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79692 = ORIENTED_EDGE ( 'NONE', *, *, #55353, .T. ) ; +#79693 = CIRCLE ( 'NONE', #49002, 10.50000000000009600 ) ; +#79694 = ORIENTED_EDGE ( 'NONE', *, *, #12136, .F. ) ; +#79695 = CARTESIAN_POINT ( 'NONE', ( 16.02235059838247700, 50.55000000000000400, -28.65316072681825700 ) ) ; +#79696 = CARTESIAN_POINT ( 'NONE', ( -3.985743576841980200, 71.58004100757877100, -28.24987021275305200 ) ) ; +#79697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79698 = ORIENTED_EDGE ( 'NONE', *, *, #60620, .T. ) ; +#79699 = ORIENTED_EDGE ( 'NONE', *, *, #79820, .T. ) ; +#79700 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78151, #3598, #47102, #9872 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183069800, 0.005168056621191832200 ), + .UNSPECIFIED. ) ; +#79701 = ORIENTED_EDGE ( 'NONE', *, *, #64086, .F. ) ; +#79702 = ORIENTED_EDGE ( 'NONE', *, *, #16423, .T. ) ; +#79703 = CARTESIAN_POINT ( 'NONE', ( -3.918018194510339800, 20.44069092601379400, -28.35186440610856100 ) ) ; +#79704 = AXIS2_PLACEMENT_3D ( 'NONE', #8887, #52405, #15174 ) ; +#79705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79706 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18763, #56007, #37492, #248 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003990342170519726800, 0.004414519045339631800 ), + .UNSPECIFIED. ) ; +#79707 = CIRCLE ( 'NONE', #52065, 9.500000000000097700 ) ; +#79708 = CARTESIAN_POINT ( 'NONE', ( -10.36059854261446000, 39.16749699759768800, -28.25434854811489100 ) ) ; +#79709 = EDGE_CURVE ( 'NONE', #39630, #42164, #36079, .T. ) ; +#79710 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79711 = AXIS2_PLACEMENT_3D ( 'NONE', #71173, #52370, #33909 ) ; +#79712 = AXIS2_PLACEMENT_3D ( 'NONE', #35778, #60814, #23531 ) ; +#79713 = CARTESIAN_POINT ( 'NONE', ( 17.31601142792136400, 30.62324289661778900, -28.43415153258097700 ) ) ; +#79714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79715 = ORIENTED_EDGE ( 'NONE', *, *, #71585, .T. ) ; +#79716 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #27511, #39990, #2703, #46211 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019572412355700E-007, 0.0004669842289003358500 ), + .UNSPECIFIED. ) ; +#79717 = CONICAL_SURFACE ( 'NONE', #49906, 10.00000000000009200, 0.7853981633974447300 ) ; +#79718 = ORIENTED_EDGE ( 'NONE', *, *, #5068, .F. ) ; +#79719 = AXIS2_PLACEMENT_3D ( 'NONE', #28681, #72172, #34896 ) ; +#79720 = ORIENTED_EDGE ( 'NONE', *, *, #36292, .T. ) ; +#79721 = ORIENTED_EDGE ( 'NONE', *, *, #76793, .F. ) ; +#79722 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 1.499999999999993800, 2.454695999814380200 ) ) ; +#79723 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65459, #9371, #71682, #34416 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690513533700E-007, 0.0007331055842534709700 ), + .UNSPECIFIED. ) ; +#79724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79725 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 41.66666666666667100, 2.794441961969992100 ) ) ; +#79726 = AXIS2_PLACEMENT_3D ( 'NONE', #724, #50470, #31757 ) ; +#79727 = CARTESIAN_POINT ( 'NONE', ( -16.73584074219412800, 40.92563948201439700, -28.45080305020446700 ) ) ; +#79728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79729 = CIRCLE ( 'NONE', #5103, 10.00000000000009200 ) ; +#79730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79732 = CONICAL_SURFACE ( 'NONE', #77564, 10.00000000000009600, 0.7853981633974447300 ) ; +#79733 = CARTESIAN_POINT ( 'NONE', ( -7.999999999999992000, 6.833333333333344600, -3.349151577478984600 ) ) ; +#79734 = ORIENTED_EDGE ( 'NONE', *, *, #67887, .F. ) ; +#79735 = CARTESIAN_POINT ( 'NONE', ( 3.500000000000101300, 60.79999999999982700, -28.70555803802997700 ) ) ; +#79736 = ORIENTED_EDGE ( 'NONE', *, *, #23081, .T. ) ; +#79737 = CARTESIAN_POINT ( 'NONE', ( 12.33974596215551000, 65.79999999999951400, -28.20555803803047800 ) ) ; +#79738 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79739 = AXIS2_PLACEMENT_3D ( 'NONE', #14972, #64778, #58215 ) ; +#79740 = EDGE_LOOP ( 'NONE', ( #30328, #11179, #69113 ) ) ; +#79741 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #54028, #10534, #16789, #60322, #23050, #66557 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001928757912409451700, 0.003857515824818903400 ), + .UNSPECIFIED. ) ; +#79742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79743 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79744 = ADVANCED_FACE ( 'NONE', ( #36376 ), #1325, .F. ) ; +#79745 = CARTESIAN_POINT ( 'NONE', ( 16.32232026310465400, 39.10230989102910100, -28.61774594594332300 ) ) ; +#79746 = EDGE_CURVE ( 'NONE', #23429, #76021, #21636, .T. ) ; +#79747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79748 = CONICAL_SURFACE ( 'NONE', #4477, 10.50000000000009600, 0.7853981633974500600 ) ; +#79750 = EDGE_LOOP ( 'NONE', ( #48419, #72089, #52081 ) ) ; +#79749 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.20555803803047800 ) ) ; +#79751 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#79752 = FACE_OUTER_BOUND ( 'NONE', #69511, .T. ) ; +#79753 = ORIENTED_EDGE ( 'NONE', *, *, #16038, .T. ) ; +#79754 = ORIENTED_EDGE ( 'NONE', *, *, #30849, .F. ) ; +#79755 = AXIS2_PLACEMENT_3D ( 'NONE', #71633, #3338, #46840 ) ; +#79756 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, -49.81214711292819400, 16.29444196196999100 ) ) ; +#79757 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725291500, 35.05000000000000400, -28.20555803802995200 ) ) ; +#79758 = EDGE_LOOP ( 'NONE', ( #34098, #64093, #20225, #42440 ) ) ; +#79759 = CONICAL_SURFACE ( 'NONE', #36092, 10.50000000000009600, 0.7853981633974500600 ) ; +#79760 = CARTESIAN_POINT ( 'NONE', ( 11.56194429656910000, 18.11613305479800200, -28.57723854182928100 ) ) ; +#79761 = EDGE_LOOP ( 'NONE', ( #41436, #77343, #22395, #28227, #44658, #5507, #33155, #58246 ) ) ; +#79762 = EDGE_LOOP ( 'NONE', ( #34429, #42713, #40707, #61358 ) ) ; +#79763 = CARTESIAN_POINT ( 'NONE', ( -5.922252789298138300, 55.79999999999997600, -28.70555803802997700 ) ) ; +#79764 = CARTESIAN_POINT ( 'NONE', ( 17.22127746187991800, 9.569148358746559800, -28.45573375118228300 ) ) ; +#79765 = ORIENTED_EDGE ( 'NONE', *, *, #29022, .F. ) ; +#79766 = VERTEX_POINT ( 'NONE', #6960 ) ; +#79767 = ORIENTED_EDGE ( 'NONE', *, *, #54399, .T. ) ; +#79768 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.29722425778842200, -28.32715733700493700 ) ) ; +#79769 = VERTEX_POINT ( 'NONE', #75247 ) ; +#79770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#79772 = ADVANCED_FACE ( 'NONE', ( #17897 ), #48993, .T. ) ; +#79773 = CARTESIAN_POINT ( 'NONE', ( 16.48638455847728300, 92.34319227923863600, -28.59447410321735800 ) ) ; +#79774 = ORIENTED_EDGE ( 'NONE', *, *, #77928, .T. ) ; +#79775 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#79776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79781 = FACE_OUTER_BOUND ( 'NONE', #62892, .T. ) ; +#79782 = VERTEX_POINT ( 'NONE', #25763 ) ; +#79783 = EDGE_CURVE ( 'NONE', #67289, #77114, #65604, .T. ) ; +#79784 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 9.737967874686777500, -28.38801640354855500 ) ) ; +#79785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79786 = ORIENTED_EDGE ( 'NONE', *, *, #16883, .F. ) ; +#79787 = ORIENTED_EDGE ( 'NONE', *, *, #33813, .T. ) ; +#79788 = EDGE_CURVE ( 'NONE', #26644, #61292, #7125, .T. ) ; +#79789 = CARTESIAN_POINT ( 'NONE', ( 8.805348767072163700E-015, 19.29999999999999000, -28.20555803802994200 ) ) ; +#79790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79791 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79792 = FACE_OUTER_BOUND ( 'NONE', #7825, .T. ) ; +#79793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79794 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#79795 = EDGE_LOOP ( 'NONE', ( #21223, #36134, #12080 ) ) ; +#79796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79797 = EDGE_CURVE ( 'NONE', #77804, #79524, #52912, .T. ) ; +#79798 = CARTESIAN_POINT ( 'NONE', ( 3.722577835444328600, 51.87833896172670500, -28.53892303408230200 ) ) ; +#79799 = ORIENTED_EDGE ( 'NONE', *, *, #52583, .T. ) ; +#79800 = ADVANCED_FACE ( 'NONE', ( #50941 ), #63653, .T. ) ; +#79801 = EDGE_CURVE ( 'NONE', #9667, #26473, #73470, .T. ) ; +#79802 = AXIS2_PLACEMENT_3D ( 'NONE', #21025, #64551, #27289 ) ; +#79803 = CONICAL_SURFACE ( 'NONE', #54593, 10.00000000000009600, 0.7853981633974447300 ) ; +#79804 = VERTEX_POINT ( 'NONE', #73859 ) ; +#79805 = ORIENTED_EDGE ( 'NONE', *, *, #41057, .T. ) ; +#79806 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 47.66666666666667900, 5.722645192245505700 ) ) ; +#79807 = AXIS2_PLACEMENT_3D ( 'NONE', #10424, #53920, #16676 ) ; +#79808 = EDGE_CURVE ( 'NONE', #76021, #71478, #67539, .T. ) ; +#79809 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#79810 = EDGE_CURVE ( 'NONE', #46026, #66366, #59000, .T. ) ; +#79811 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 90.16349705304865800, -28.30782889147482400 ) ) ; +#79812 = EDGE_CURVE ( 'NONE', #49174, #2702, #44492, .T. ) ; +#79813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79814 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37689, #74986, #25498, #68994 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004767280750183090600, 0.005168056621191878200 ), + .UNSPECIFIED. ) ; +#79815 = AXIS2_PLACEMENT_3D ( 'NONE', #18595, #49546, #61588 ) ; +#79816 = CIRCLE ( 'NONE', #51053, 10.00000000000009600 ) ; +#79817 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992000, 29.79999999999999000, -28.70555803802995200 ) ) ; +#79818 = CONICAL_SURFACE ( 'NONE', #52999, 10.50000000000009600, 0.7853981633974500600 ) ; +#79819 = ORIENTED_EDGE ( 'NONE', *, *, #68786, .F. ) ; +#79820 = EDGE_CURVE ( 'NONE', #11747, #31022, #34452, .T. ) ; +#79821 = AXIS2_PLACEMENT_3D ( 'NONE', #56468, #19214, #62753 ) ; +#79822 = AXIS2_PLACEMENT_3D ( 'NONE', #3953, #66271, #29041 ) ; +#79823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #68250, #24734, #6239, #49707 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001538296717493930300 ), + .UNSPECIFIED. ) ; +#79824 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#79825 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79826 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79827 = CARTESIAN_POINT ( 'NONE', ( -17.20301974914537300, 71.82440674572814000, -28.45987523529581900 ) ) ; +#79828 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 19.00000000000001400, -12.20555803803000200 ) ) ; +#79829 = CARTESIAN_POINT ( 'NONE', ( -5.488977734725289700, 24.55000000000000100, -28.20555803802994200 ) ) ; +#79830 = FACE_OUTER_BOUND ( 'NONE', #5774, .T. ) ; +#79831 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .T. ) ; +#79832 = ORIENTED_EDGE ( 'NONE', *, *, #5566, .T. ) ; +#79833 = CARTESIAN_POINT ( 'NONE', ( -2.495236841534571600, 18.99920551340398600, -28.70555803802992800 ) ) ; +#79834 = CIRCLE ( 'NONE', #61600, 10.00000000000009200 ) ; +#79835 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #42091, #35868, #11128, #54627 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262727634392651900E-007, 0.0008082706238601635500 ), + .UNSPECIFIED. ) ; +#79836 = VERTEX_POINT ( 'NONE', #55594 ) ; +#79837 = ORIENTED_EDGE ( 'NONE', *, *, #15812, .T. ) ; +#79838 = VERTEX_POINT ( 'NONE', #61885 ) ; +#79839 = VERTEX_POINT ( 'NONE', #37084 ) ; +#79840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79841 = ORIENTED_EDGE ( 'NONE', *, *, #37674, .F. ) ; +#79842 = CARTESIAN_POINT ( 'NONE', ( 3.114671482174760100, 60.16054007504465100, -28.34042301926881200 ) ) ; +#79843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79844 = ORIENTED_EDGE ( 'NONE', *, *, #51259, .F. ) ; +#79845 = CARTESIAN_POINT ( 'NONE', ( -3.064555739224877200, 81.50962196508497500, -28.29483400905894900 ) ) ; +#79846 = EDGE_LOOP ( 'NONE', ( #16081, #80719, #46621, #4754 ) ) ; +#79847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46015, #39780, #27034, #8752 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.937377690709678500E-007, 0.0007331055842534708600 ), + .UNSPECIFIED. ) ; +#79848 = ADVANCED_FACE ( 'NONE', ( #32479 ), #78231, .F. ) ; +#79849 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79850 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551010400, 50.50000000000000000, -7.061964498581026800 ) ) ; +#79851 = AXIS2_PLACEMENT_3D ( 'NONE', #79416, #79675, #23668 ) ; +#79852 = ORIENTED_EDGE ( 'NONE', *, *, #16891, .F. ) ; +#79853 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.20555803802997700 ) ) ; +#79854 = FACE_OUTER_BOUND ( 'NONE', #18496, .T. ) ; +#79855 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 60.36203212531315600, -28.38801640354855100 ) ) ; +#79856 = CARTESIAN_POINT ( 'NONE', ( 3.660254037844394400, 53.50000000000000700, 2.454695999814380200 ) ) ; +#79857 = ORIENTED_EDGE ( 'NONE', *, *, #15197, .F. ) ; +#79858 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.70555803802996700 ) ) ; +#79859 = ORIENTED_EDGE ( 'NONE', *, *, #30145, .F. ) ; +#79860 = EDGE_CURVE ( 'NONE', #72677, #9750, #30568, .T. ) ; +#79861 = ORIENTED_EDGE ( 'NONE', *, *, #40130, .T. ) ; +#79862 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79863 = ORIENTED_EDGE ( 'NONE', *, *, #12241, .T. ) ; +#79864 = AXIS2_PLACEMENT_3D ( 'NONE', #69005, #31751, #75260 ) ; +#79865 = CARTESIAN_POINT ( 'NONE', ( 4.155502077150701200, 30.82033471810043700, -28.30868034705251200 ) ) ; +#79866 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999500, 71.07757630314202400, -28.53861367218593200 ) ) ; +#79867 = FACE_OUTER_BOUND ( 'NONE', #8735, .T. ) ; +#79868 = CARTESIAN_POINT ( 'NONE', ( -1.511022265274715200, 24.54999999999997200, -28.20555803802994200 ) ) ; +#79869 = ADVANCED_FACE ( 'NONE', ( #47052 ), #28640, .T. ) ; +#79870 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79871 = AXIS2_PLACEMENT_3D ( 'NONE', #77066, #52280, #15057 ) ; +#79872 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999999100, 67.22261628933270600, -28.70555803802997700 ) ) ; +#79873 = ORIENTED_EDGE ( 'NONE', *, *, #63374, .F. ) ; +#79874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79875 = CARTESIAN_POINT ( 'NONE', ( 4.906733260263272300, 35.04999999999995500, -28.70555803802995200 ) ) ; +#79876 = CARTESIAN_POINT ( 'NONE', ( 7.132931438259246900E-015, 25.96443389862716000, -28.54207364681940000 ) ) ; +#79877 = CARTESIAN_POINT ( 'NONE', ( -4.002024496668897600, 39.28907889423218300, -28.25433304472393600 ) ) ; +#79878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79880 = CARTESIAN_POINT ( 'NONE', ( -11.03625510818103300, 89.94924284854707300, -28.20555803802997700 ) ) ; +#79881 = AXIS2_PLACEMENT_3D ( 'NONE', #57691, #26974, #70454 ) ; +#79882 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79883 = CONICAL_SURFACE ( 'NONE', #46698, 10.50000000000009600, 0.7853981633974482800 ) ; +#79885 = ORIENTED_EDGE ( 'NONE', *, *, #47098, .T. ) ; +#79884 = ADVANCED_FACE ( 'NONE', ( #27670 ), #100, .T. ) ; +#79886 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79887 = EDGE_LOOP ( 'NONE', ( #22846, #17731, #69254, #26151, #57717, #7059, #28376, #49678 ) ) ; +#79888 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 80.79999999999998300, -28.20555803802997700 ) ) ; +#79889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79890 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#79891 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3592, #28416, #65646, #47092 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441217712289641800E-007, 0.0008482615949374342800 ), + .UNSPECIFIED. ) ; +#79892 = ADVANCED_FACE ( 'NONE', ( #13997 ), #59745, .F. ) ; +#79893 = EDGE_CURVE ( 'NONE', #41614, #12346, #76261, .T. ) ; +#79894 = CIRCLE ( 'NONE', #64116, 10.00000000000009200 ) ; +#79895 = CARTESIAN_POINT ( 'NONE', ( -3.121412514499836400, 59.83662311806158800, -28.37223523914914500 ) ) ; +#79896 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 59.83333333333333600, -4.152999154772353500 ) ) ; +#79897 = EDGE_CURVE ( 'NONE', #52713, #50621, #15943, .T. ) ; +#79898 = ORIENTED_EDGE ( 'NONE', *, *, #55829, .F. ) ; +#79899 = ORIENTED_EDGE ( 'NONE', *, *, #30016, .F. ) ; +#79900 = CARTESIAN_POINT ( 'NONE', ( 11.54774122007438000, 27.81967837323414700, -28.55467576046955400 ) ) ; +#79901 = ORIENTED_EDGE ( 'NONE', *, *, #55240, .F. ) ; +#79902 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000005300, 25.00000000000002100, -1.205558038030002800 ) ) ; +#79903 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527300, 35.04999999999997600, -28.20555803802995200 ) ) ; +#79904 = EDGE_CURVE ( 'NONE', #17173, #25973, #45074, .T. ) ; +#79905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79906 = FACE_OUTER_BOUND ( 'NONE', #43952, .T. ) ; +#79907 = ORIENTED_EDGE ( 'NONE', *, *, #29904, .F. ) ; +#79908 = ORIENTED_EDGE ( 'NONE', *, *, #30016, .T. ) ; +#79909 = EDGE_CURVE ( 'NONE', #8089, #55188, #30120, .T. ) ; +#79910 = EDGE_CURVE ( 'NONE', #65360, #7245, #15637, .T. ) ; +#79911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79913 = CIRCLE ( 'NONE', #31334, 9.500000000000099500 ) ; +#79914 = CARTESIAN_POINT ( 'NONE', ( -9.526279441628814100, 27.33333333333333900, 4.294441961970000500 ) ) ; +#79915 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#79916 = ORIENTED_EDGE ( 'NONE', *, *, #42705, .T. ) ; +#79917 = EDGE_LOOP ( 'NONE', ( #68593, #42561, #37430, #40185, #23610, #59915, #26834 ) ) ; +#79918 = ORIENTED_EDGE ( 'NONE', *, *, #13444, .F. ) ; +#79919 = CARTESIAN_POINT ( 'NONE', ( -8.645813086124976000, 56.46717019299477900, -28.53914313452736500 ) ) ; +#79920 = CARTESIAN_POINT ( 'NONE', ( -4.036255108181025600, 89.94924284854707300, -28.20555803802997700 ) ) ; +#79921 = VERTEX_POINT ( 'NONE', #25696 ) ; +#79922 = AXIS2_PLACEMENT_3D ( 'NONE', #71643, #9613, #77891 ) ; +#79923 = CIRCLE ( 'NONE', #71370, 10.00000000000009600 ) ; +#79924 = EDGE_CURVE ( 'NONE', #23151, #12975, #1138, .T. ) ; +#79925 = PLANE ( 'NONE', #42718 ) ; +#79926 = EDGE_CURVE ( 'NONE', #70292, #5932, #67471, .T. ) ; +#79927 = CARTESIAN_POINT ( 'NONE', ( -16.35907809823701300, 38.19543746431600800, -28.61277292027075700 ) ) ; +#79928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79929 = EDGE_CURVE ( 'NONE', #780, #73936, #52998, .T. ) ; +#79930 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79932 = CARTESIAN_POINT ( 'NONE', ( -16.03160744576919000, 24.55000000000000100, -28.65220501466659500 ) ) ; +#79933 = EDGE_LOOP ( 'NONE', ( #62527, #57345, #12929, #74830, #34632 ) ) ; +#79934 = CONICAL_SURFACE ( 'NONE', #37947, 10.50000000000009800, 0.7853981633974518300 ) ; +#79935 = AXIS2_PLACEMENT_3D ( 'NONE', #12949, #56442, #19191 ) ; +#79936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79937 = ORIENTED_EDGE ( 'NONE', *, *, #70488, .F. ) ; +#79938 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#79939 = CARTESIAN_POINT ( 'NONE', ( -17.50000000000000400, 70.36203212531316400, -28.38801640354855800 ) ) ; +#79940 = VERTEX_POINT ( 'NONE', #56952 ) ; +#79941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #25532, #69024, #44224, #6998 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0006635435622852012000, 0.0009376791149930238600 ), + .UNSPECIFIED. ) ; +#79943 = ORIENTED_EDGE ( 'NONE', *, *, #44935, .F. ) ; +#79944 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524200, 61.43945992495532900, -28.34042301926881200 ) ) ; +#79945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79946 = EDGE_LOOP ( 'NONE', ( #51294, #80612, #15754, #51539, #18644 ) ) ; +#79947 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79948 = CARTESIAN_POINT ( 'NONE', ( 4.010462731462826700, 80.34267608797601700, -28.20555803803030800 ) ) ; +#79949 = CONICAL_SURFACE ( 'NONE', #27449, 10.50000000000009400, 0.7853981633974500600 ) ; +#79950 = AXIS2_PLACEMENT_3D ( 'NONE', #33791, #9283, #27835 ) ; +#79951 = CARTESIAN_POINT ( 'NONE', ( -16.64738859883171800, 90.80839482151895900, -28.55816943919835900 ) ) ; +#79952 = AXIS2_PLACEMENT_3D ( 'NONE', #54577, #79342, #17317 ) ; +#79953 = CARTESIAN_POINT ( 'NONE', ( -3.057126731466676400, 28.30869142985028800, -28.37223374938521300 ) ) ; +#79954 = AXIS2_PLACEMENT_3D ( 'NONE', #5988, #31020, #18498 ) ; +#79955 = ADVANCED_FACE ( 'NONE', ( #80178 ), #57770, .F. ) ; +#79956 = ORIENTED_EDGE ( 'NONE', *, *, #68946, .F. ) ; +#79957 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79958 = CARTESIAN_POINT ( 'NONE', ( 2.143593539448987800, 30.83333333333332900, -9.205558038030003900 ) ) ; +#79959 = CONICAL_SURFACE ( 'NONE', #22196, 10.50000000000009200, 0.7853981633974482800 ) ; +#79960 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79961 = ORIENTED_EDGE ( 'NONE', *, *, #35263, .T. ) ; +#79962 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#79963 = ADVANCED_FACE ( 'NONE', ( #10097 ), #24688, .F. ) ; +#79964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79965 = AXIS2_PLACEMENT_3D ( 'NONE', #35195, #53654, #28964 ) ; +#79966 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79967 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79968 = CARTESIAN_POINT ( 'NONE', ( 7.667637940079192300, 57.14999999999998400, -5.274519518250587100 ) ) ; +#79969 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78699, #4151, #47631, #10413 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.589368052756218800E-007, 0.0003301033223275598200 ), + .UNSPECIFIED. ) ; +#79970 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79971 = CARTESIAN_POINT ( 'NONE', ( 2.964079643063589000, 18.00210619075114900, -28.25343951603357700 ) ) ; +#79972 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#79973 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 9.932503002402294000, -28.20555803802994200 ) ) ; +#79974 = ADVANCED_FACE ( 'NONE', ( #74350 ), #72402, .F. ) ; +#79975 = EDGE_CURVE ( 'NONE', #32523, #68751, #8102, .T. ) ; +#79976 = EDGE_LOOP ( 'NONE', ( #57422, #66865, #23585 ) ) ; +#79977 = CARTESIAN_POINT ( 'NONE', ( -4.304045783390575000, 70.13716795162658000, -28.48697406221667800 ) ) ; +#79978 = VERTEX_POINT ( 'NONE', #75968 ) ; +#79979 = AXIS2_PLACEMENT_3D ( 'NONE', #40263, #2996, #46484 ) ; +#79980 = ORIENTED_EDGE ( 'NONE', *, *, #6147, .F. ) ; +#79981 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79982 = CARTESIAN_POINT ( 'NONE', ( -17.04409106865852400, 49.91272737910568200, -28.28853693900643100 ) ) ; +#79983 = CARTESIAN_POINT ( 'NONE', ( -4.095262490344303800, 49.42298334620756600, -28.20555803802996700 ) ) ; +#79984 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79985 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #64238, #64514, #58488, #21247 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.042005925639859800E-007, 0.0004431156063177198800 ), + .UNSPECIFIED. ) ; +#79986 = ADVANCED_FACE ( 'NONE', ( #12055 ), #22739, .T. ) ; +#79987 = FACE_OUTER_BOUND ( 'NONE', #38258, .T. ) ; +#79988 = VERTEX_POINT ( 'NONE', #20226 ) ; +#79989 = AXIS2_PLACEMENT_3D ( 'NONE', #77959, #65736, #53191 ) ; +#79990 = EDGE_LOOP ( 'NONE', ( #8067, #2963, #71046 ) ) ; +#79991 = FACE_OUTER_BOUND ( 'NONE', #40713, .T. ) ; +#79992 = EDGE_LOOP ( 'NONE', ( #26869, #9771, #52239 ) ) ; +#79993 = VERTEX_POINT ( 'NONE', #63758 ) ; +#79994 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414100200, 60.70627955247211100, -28.45034744217088700 ) ) ; +#79995 = VERTEX_POINT ( 'NONE', #26507 ) ; +#79996 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, -0.6666666666666625200, -5.535685056952199400 ) ) ; +#79997 = AXIS2_PLACEMENT_3D ( 'NONE', #65904, #28667, #72161 ) ; +#79998 = CIRCLE ( 'NONE', #41099, 10.00000000000009600 ) ; +#79999 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80000 = CARTESIAN_POINT ( 'NONE', ( 6.404563207644337000E-015, 40.29999999999999000, -28.70555803802996700 ) ) ; +#80001 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 39.50000000000000700, -7.061964498581016200 ) ) ; +#80002 = FACE_OUTER_BOUND ( 'NONE', #11664, .T. ) ; +#80003 = CARTESIAN_POINT ( 'NONE', ( -16.98953726853715600, 80.34267608797600200, -28.20555803802997700 ) ) ; +#80004 = EDGE_CURVE ( 'NONE', #29021, #862, #39253, .T. ) ; +#80005 = ORIENTED_EDGE ( 'NONE', *, *, #74207, .F. ) ; +#80006 = CARTESIAN_POINT ( 'NONE', ( 4.378021327472986000, 18.13131911501867700, -28.51286550264547200 ) ) ; +#80007 = CARTESIAN_POINT ( 'NONE', ( 9.963744891819091600, 61.65075715145258800, -28.20555803803014100 ) ) ; +#80008 = ORIENTED_EDGE ( 'NONE', *, *, #61165, .T. ) ; +#80009 = CARTESIAN_POINT ( 'NONE', ( 6.928203230275515000, 4.666666666666680300, 2.794441961969992100 ) ) ; +#80010 = VERTEX_POINT ( 'NONE', #57477 ) ; +#80011 = EDGE_LOOP ( 'NONE', ( #52411, #13094, #69794 ) ) ; +#80012 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #65131, #77605, #15602, #59106 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.203169389885215500E-007, 0.0008082646680357306300 ), + .UNSPECIFIED. ) ; +#80013 = CONICAL_SURFACE ( 'NONE', #72142, 10.00000000000009200, 0.7853981633974447300 ) ; +#80014 = EDGE_LOOP ( 'NONE', ( #801, #79604, #19405 ) ) ; +#80015 = CARTESIAN_POINT ( 'NONE', ( 7.604955987358252700E-015, 29.79999999999999000, -28.20555803802995200 ) ) ; +#80016 = FACE_OUTER_BOUND ( 'NONE', #44203, .T. ) ; +#80017 = CARTESIAN_POINT ( 'NONE', ( -9.695954216609429500, 71.46283204837338600, -28.48697406221667100 ) ) ; +#80018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80019 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488138000, 59.60439022488338200, -28.70555803802997700 ) ) ; +#80020 = CARTESIAN_POINT ( 'NONE', ( -17.24478940414102700, 19.29999999999999000, -28.45034744217088000 ) ) ; +#80021 = EDGE_CURVE ( 'NONE', #49881, #30155, #38510, .T. ) ; +#80022 = EDGE_CURVE ( 'NONE', #74524, #60356, #26654, .T. ) ; +#80023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80024 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80025 = CONICAL_SURFACE ( 'NONE', #14330, 10.50000000000009600, 0.7853981633974500600 ) ; +#80026 = ORIENTED_EDGE ( 'NONE', *, *, #23792, .T. ) ; +#80027 = EDGE_LOOP ( 'NONE', ( #1832, #71909, #71174, #65777 ) ) ; +#80028 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80029 = CARTESIAN_POINT ( 'NONE', ( -10.04027359854958600, 18.22437813624630100, -28.30310527599298000 ) ) ; +#80030 = CARTESIAN_POINT ( 'NONE', ( 15.47405959995703400, 35.98096581827316200, -28.69431509262337300 ) ) ; +#80031 = CARTESIAN_POINT ( 'NONE', ( -11.01046273146280400, 81.25732391202397800, -28.20555803802997700 ) ) ; +#80032 = CARTESIAN_POINT ( 'NONE', ( 17.90255987543116200, 49.73522516708107600, -28.27573853395004700 ) ) ; +#80033 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851492000, 34.09761904761904800, -28.70555803802995200 ) ) ; +#80034 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714215400, 77.92318720225458200, -28.70555803803030800 ) ) ; +#80035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80036 = AXIS2_PLACEMENT_3D ( 'NONE', #74642, #31135, #30865 ) ; +#80037 = EDGE_CURVE ( 'NONE', #14715, #40430, #24111, .T. ) ; +#80038 = EDGE_CURVE ( 'NONE', #25026, #9472, #9636, .T. ) ; +#80039 = EDGE_CURVE ( 'NONE', #39538, #10136, #75946, .T. ) ; +#80040 = CARTESIAN_POINT ( 'NONE', ( 6.285714285714284700, 47.42318720225497200, -28.70555803802996700 ) ) ; +#80041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80043 = EDGE_CURVE ( 'NONE', #77717, #54124, #61519, .T. ) ; +#80044 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 96.59999999999999400, -18.70555803803001300 ) ) ; +#80045 = AXIS2_PLACEMENT_3D ( 'NONE', #5424, #23937, #79960 ) ; +#80046 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80047 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80048 = CARTESIAN_POINT ( 'NONE', ( 15.07025710783656100, 9.859485784326881900, -28.70457077705549100 ) ) ; +#80049 = CARTESIAN_POINT ( 'NONE', ( 11.23989450732770800, 89.66414768974068700, -28.38420446581294600 ) ) ; +#80050 = ORIENTED_EDGE ( 'NONE', *, *, #62290, .F. ) ; +#80051 = EDGE_LOOP ( 'NONE', ( #54371, #26522, #23338, #64779 ) ) ; +#80052 = CARTESIAN_POINT ( 'NONE', ( 8.783306465195847700, 60.80000000000000400, -28.32841359973439700 ) ) ; +#80053 = AXIS2_PLACEMENT_3D ( 'NONE', #74729, #18433, #49931 ) ; +#80054 = AXIS2_PLACEMENT_3D ( 'NONE', #11903, #55391, #18143 ) ; +#80055 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 74.83849307182684600, -28.68631150211663100 ) ) ; +#80056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #56909, #19647, #63178, #25915 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.227482215243842600E-016, 0.001179148174662232900 ), + .UNSPECIFIED. ) ; +#80057 = FACE_OUTER_BOUND ( 'NONE', #73904, .T. ) ; +#80058 = ORIENTED_EDGE ( 'NONE', *, *, #55004, .F. ) ; +#80059 = CIRCLE ( 'NONE', #80068, 10.50000000000009600 ) ; +#80060 = ORIENTED_EDGE ( 'NONE', *, *, #28978, .F. ) ; +#80061 = ADVANCED_FACE ( 'NONE', ( #41223 ), #37296, .T. ) ; +#80062 = VERTEX_POINT ( 'NONE', #33525 ) ; +#80063 = FACE_OUTER_BOUND ( 'NONE', #70111, .T. ) ; +#80064 = EDGE_LOOP ( 'NONE', ( #15643, #53290, #54974 ) ) ; +#80065 = ORIENTED_EDGE ( 'NONE', *, *, #39739, .F. ) ; +#80066 = ADVANCED_FACE ( 'NONE', ( #61700 ), #4222, .F. ) ; +#80067 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 45.49999999999998600, -7.061964498581022400 ) ) ; +#80068 = AXIS2_PLACEMENT_3D ( 'NONE', #77257, #39992, #2704 ) ; +#80069 = EDGE_CURVE ( 'NONE', #30625, #30021, #46991, .T. ) ; +#80070 = FACE_OUTER_BOUND ( 'NONE', #67028, .T. ) ; +#80071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80073 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 40.29999999999999000, -28.20555803802996700 ) ) ; +#80074 = ADVANCED_FACE ( 'NONE', ( #70405 ), #51877, .T. ) ; +#80075 = CARTESIAN_POINT ( 'NONE', ( -9.955096376567148300, 49.85339758437810100, -28.20555803802996700 ) ) ; +#80076 = EDGE_LOOP ( 'NONE', ( #3481, #22014, #48656, #71027 ) ) ; +#80077 = FACE_OUTER_BOUND ( 'NONE', #13962, .T. ) ; +#80078 = ORIENTED_EDGE ( 'NONE', *, *, #18819, .F. ) ; +#80079 = EDGE_CURVE ( 'NONE', #66234, #63652, #32563, .T. ) ; +#80080 = ORIENTED_EDGE ( 'NONE', *, *, #80149, .F. ) ; +#80081 = AXIS2_PLACEMENT_3D ( 'NONE', #63469, #26213, #69697 ) ; +#80082 = ORIENTED_EDGE ( 'NONE', *, *, #43668, .T. ) ; +#80083 = FACE_OUTER_BOUND ( 'NONE', #1503, .T. ) ; +#80084 = CARTESIAN_POINT ( 'NONE', ( 14.23819945280398400, 63.65857157145644900, -28.37229765499320800 ) ) ; +#80085 = EDGE_LOOP ( 'NONE', ( #13436, #64699, #42030 ) ) ; +#80086 = CIRCLE ( 'NONE', #71634, 10.00000000000009200 ) ; +#80087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80088 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80089 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80090 = CARTESIAN_POINT ( 'NONE', ( 3.431707303488114900, 69.60439022488320400, -28.70555803802997700 ) ) ; +#80091 = CARTESIAN_POINT ( 'NONE', ( 13.76180054719559300, 73.65857157145693200, -28.37229765499328200 ) ) ; +#80092 = CARTESIAN_POINT ( 'NONE', ( -2.947441116742338900, 16.83333333333333600, 9.794441961969999600 ) ) ; +#80093 = ORIENTED_EDGE ( 'NONE', *, *, #64118, .F. ) ; +#80094 = CARTESIAN_POINT ( 'NONE', ( -2.071428571428586700, 70.07141756547893900, -28.70555803802997700 ) ) ; +#80095 = ORIENTED_EDGE ( 'NONE', *, *, #23193, .T. ) ; +#80096 = AXIS2_PLACEMENT_3D ( 'NONE', #2623, #46132, #8872 ) ; +#80097 = CARTESIAN_POINT ( 'NONE', ( -15.44287341260010400, 18.20034312068830200, -28.70555803803001600 ) ) ; +#80098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80099 = CIRCLE ( 'NONE', #73201, 10.00000000000009200 ) ; +#80100 = ORIENTED_EDGE ( 'NONE', *, *, #37234, .F. ) ; +#80101 = CONICAL_SURFACE ( 'NONE', #36811, 10.50000000000009400, 0.7853981633974500600 ) ; +#80102 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655456400, 10.17701665379220800, -28.20555803802993500 ) ) ; +#80103 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #22061, #46765, #71837, #34576 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.003433570393716350300, 0.004080294652942876800 ), + .UNSPECIFIED. ) ; +#80104 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.70555803802997700 ) ) ; +#80105 = CARTESIAN_POINT ( 'NONE', ( -17.06687702944367000, 28.30044153222985100, -28.38339015421984600 ) ) ; +#80106 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80107 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80108 = CARTESIAN_POINT ( 'NONE', ( 4.504763158465467000, 18.99920551340383700, -28.70555803803009500 ) ) ; +#80109 = AXIS2_PLACEMENT_3D ( 'NONE', #45858, #8604, #52113 ) ; +#80110 = CARTESIAN_POINT ( 'NONE', ( -10.66960177948457700, 71.01872124563918500, -28.53757464917570600 ) ) ; +#80111 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000011500, 48.33333333333335700, 5.722645192245503100 ) ) ; +#80112 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655686400, 31.17701665379241000, -28.20555803802996000 ) ) ; +#80113 = CARTESIAN_POINT ( 'NONE', ( -17.24374921994469300, 80.98711723699935300, -28.45058723417198400 ) ) ; +#80114 = EDGE_CURVE ( 'NONE', #19524, #77804, #53873, .T. ) ; +#80115 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 51.33333333333333600, -5.535685056952199400 ) ) ; +#80116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80117 = CARTESIAN_POINT ( 'NONE', ( 4.186539978270463500, 6.877501000801542500, -28.20555803803025800 ) ) ; +#80118 = ORIENTED_EDGE ( 'NONE', *, *, #56520, .F. ) ; +#80119 = CARTESIAN_POINT ( 'NONE', ( -2.621978672528131800, 30.96868088498121800, -28.51286550264512000 ) ) ; +#80120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80121 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000700, 29.84772751981643100, -28.70555803802999200 ) ) ; +#80122 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999993800, 57.94142842854297700, -28.20555803802997700 ) ) ; +#80123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80124 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 29.79999999999999000, -28.70555803802995200 ) ) ; +#80125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80126 = CONICAL_SURFACE ( 'NONE', #64219, 10.00000000000009200, 0.7853981633974447300 ) ; +#80127 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 50.79999999999999000, -28.20555803802997700 ) ) ; +#80128 = ORIENTED_EDGE ( 'NONE', *, *, #69797, .F. ) ; +#80129 = CARTESIAN_POINT ( 'NONE', ( -0.2381994528040578500, 36.94142842854297000, -28.37229765499279600 ) ) ; +#80130 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000001100, 63.99926474563209700, -28.70555803802999500 ) ) ; +#80131 = CIRCLE ( 'NONE', #55514, 9.500000000000097700 ) ; +#80132 = EDGE_CURVE ( 'NONE', #40804, #12766, #68469, .T. ) ; +#80133 = VERTEX_POINT ( 'NONE', #9293 ) ; +#80134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80135 = CONICAL_SURFACE ( 'NONE', #21504, 10.50000000000009400, 0.7853981633974500600 ) ; +#80136 = EDGE_CURVE ( 'NONE', #53536, #30761, #20787, .T. ) ; +#80138 = ORIENTED_EDGE ( 'NONE', *, *, #65981, .T. ) ; +#80137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80139 = ORIENTED_EDGE ( 'NONE', *, *, #69515, .T. ) ; +#80140 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80141 = CARTESIAN_POINT ( 'NONE', ( -9.989537268537160800, 80.34267608797600200, -28.20555803802997700 ) ) ; +#80142 = ORIENTED_EDGE ( 'NONE', *, *, #12363, .T. ) ; +#80143 = EDGE_CURVE ( 'NONE', #29475, #49030, #18111, .T. ) ; +#80144 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80145 = CARTESIAN_POINT ( 'NONE', ( 17.22127746188003500, 29.03085164125335300, -28.45573375118225100 ) ) ; +#80147 = ADVANCED_FACE ( 'NONE', ( #55809 ), #49928, .F. ) ; +#80146 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78937, #60446, #23163, #66677 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.087459151777253100E-007, 0.0007679767755134369600 ), + .UNSPECIFIED. ) ; +#80148 = FACE_OUTER_BOUND ( 'NONE', #15531, .T. ) ; +#80149 = EDGE_CURVE ( 'NONE', #42498, #16848, #3630, .T. ) ; +#80150 = ORIENTED_EDGE ( 'NONE', *, *, #41403, .T. ) ; +#80151 = AXIS2_PLACEMENT_3D ( 'NONE', #20794, #70551, #45765 ) ; +#80152 = ORIENTED_EDGE ( 'NONE', *, *, #34288, .F. ) ; +#80153 = CARTESIAN_POINT ( 'NONE', ( 11.04490362343279300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#80154 = CARTESIAN_POINT ( 'NONE', ( 9.526279441628830100, 57.66666666666667900, 4.294441961969993400 ) ) ; +#80155 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76984, #33466, #45950, #8686 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.925473287038829500E-007, 0.0007303759720927769500 ), + .UNSPECIFIED. ) ; +#80156 = ORIENTED_EDGE ( 'NONE', *, *, #72174, .F. ) ; +#80157 = ORIENTED_EDGE ( 'NONE', *, *, #22964, .T. ) ; +#80158 = CARTESIAN_POINT ( 'NONE', ( -8.616843969807122900, 76.79999999999994000, -28.70555803802997700 ) ) ; +#80159 = ORIENTED_EDGE ( 'NONE', *, *, #44955, .F. ) ; +#80160 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11881, #49089, #61664, #24386 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159168900E-007, 0.0008724363063898909800 ), + .UNSPECIFIED. ) ; +#80161 = ADVANCED_FACE ( 'NONE', ( #66524 ), #16894, .T. ) ; +#80162 = CIRCLE ( 'NONE', #41360, 10.50000000000009600 ) ; +#80163 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 22.83333333333334300, -2.545304000185615800 ) ) ; +#80164 = AXIS2_PLACEMENT_3D ( 'NONE', #52934, #15703, #59206 ) ; +#80165 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#80166 = EDGE_CURVE ( 'NONE', #77798, #58440, #33418, .T. ) ; +#80167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80168 = EDGE_CURVE ( 'NONE', #66701, #16630, #6186, .T. ) ; +#80169 = CARTESIAN_POINT ( 'NONE', ( -11.28317650709905200, 31.03732497909461700, -28.41043597897462200 ) ) ; +#80171 = ORIENTED_EDGE ( 'NONE', *, *, #20156, .F. ) ; +#80170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #55527, #30543, #24537, #68048 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.441099552989195900E-007, 0.0008759529789578713000 ), + .UNSPECIFIED. ) ; +#80172 = AXIS2_PLACEMENT_3D ( 'NONE', #76253, #26251, #7968 ) ; +#80173 = ORIENTED_EDGE ( 'NONE', *, *, #57727, .F. ) ; +#80174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80175 = ORIENTED_EDGE ( 'NONE', *, *, #63724, .F. ) ; +#80176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80177 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782523800, 51.43945992495533700, -28.34042301926881500 ) ) ; +#80178 = FACE_OUTER_BOUND ( 'NONE', #46400, .T. ) ; +#80179 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000500, 25.16666666666666400, -4.152999154772358800 ) ) ; +#80180 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80181 = CARTESIAN_POINT ( 'NONE', ( 16.49262442484957000, 79.28967419478925600, -28.59353418718928100 ) ) ; +#80182 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000900, 9.760897458958877900, -28.36630947932767900 ) ) ; +#80183 = EDGE_CURVE ( 'NONE', #44057, #12264, #2255, .T. ) ; +#80184 = AXIS2_PLACEMENT_3D ( 'NONE', #56339, #31356, #68863 ) ; +#80185 = AXIS2_PLACEMENT_3D ( 'NONE', #47723, #10496, #53995 ) ; +#80186 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80187 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80189 = ADVANCED_FACE ( 'NONE', ( #18833 ), #14929, .T. ) ; +#80190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80191 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 20.30277574221154400, -28.32715733700493400 ) ) ; +#80192 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385224700, 38.99322649091141100, -28.30799595738880500 ) ) ; +#80193 = CONICAL_SURFACE ( 'NONE', #3365, 10.50000000000009600, 0.7853981633974500600 ) ; +#80194 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80195 = CARTESIAN_POINT ( 'NONE', ( -15.22588627973404800, 84.26498457889741200, -28.70555803803001600 ) ) ; +#80196 = CARTESIAN_POINT ( 'NONE', ( -9.785741443455970400, 71.52472935029898300, -28.39317435246130100 ) ) ; +#80198 = ORIENTED_EDGE ( 'NONE', *, *, #75263, .F. ) ; +#80197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80199 = CARTESIAN_POINT ( 'NONE', ( -16.63444121378045200, 90.82516071402460500, -28.57108397021912800 ) ) ; +#80200 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655605600, 38.92298334620759400, -28.20555803802996000 ) ) ; +#80201 = ORIENTED_EDGE ( 'NONE', *, *, #57514, .F. ) ; +#80202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #37669, #50170, #12965, #56454 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0008526856278954270000, 0.001517194977238144300 ), + .UNSPECIFIED. ) ; +#80203 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999998200, 77.22261628933269200, -28.70555803802997700 ) ) ; +#80204 = CARTESIAN_POINT ( 'NONE', ( 10.16044954828107000, 70.46231468379640700, -28.37082013777820300 ) ) ; +#80205 = CARTESIAN_POINT ( 'NONE', ( 9.904737509655678500, 28.42298334620757000, -28.20555803802994500 ) ) ; +#80206 = FACE_OUTER_BOUND ( 'NONE', #16548, .T. ) ; +#80207 = AXIS2_PLACEMENT_3D ( 'NONE', #59659, #65917, #71899 ) ; +#80208 = VERTEX_POINT ( 'NONE', #35182 ) ; +#80209 = FACE_OUTER_BOUND ( 'NONE', #21478, .T. ) ; +#80210 = EDGE_LOOP ( 'NONE', ( #34584, #61918, #36594, #79145, #5441 ) ) ; +#80211 = CARTESIAN_POINT ( 'NONE', ( -3.999999999999986200, 28.66666666666667900, 5.722645192245505700 ) ) ; +#80212 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993800, 77.46443389862669400, -28.54207364681986500 ) ) ; +#80213 = ORIENTED_EDGE ( 'NONE', *, *, #5552, .T. ) ; +#80214 = CONICAL_SURFACE ( 'NONE', #65243, 10.00000000000009200, 0.7853981633974447300 ) ; +#80215 = FACE_OUTER_BOUND ( 'NONE', #18329, .T. ) ; +#80216 = ORIENTED_EDGE ( 'NONE', *, *, #45414, .F. ) ; +#80217 = ORIENTED_EDGE ( 'NONE', *, *, #43763, .T. ) ; +#80218 = EDGE_LOOP ( 'NONE', ( #75618, #79264, #11559 ) ) ; +#80219 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 96.59999999999999400, 8.794441961969976500 ) ) ; +#80220 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 60.34510448120794000, -28.37193179497697000 ) ) ; +#80221 = AXIS2_PLACEMENT_3D ( 'NONE', #54290, #48005, #60575 ) ; +#80222 = CARTESIAN_POINT ( 'NONE', ( -2.808476898877851000, 29.07332680091207800, -28.37233769390153900 ) ) ; +#80223 = CARTESIAN_POINT ( 'NONE', ( 7.778407824762828300, 57.14999999999999900, -3.075416779130120100 ) ) ; +#80224 = EDGE_CURVE ( 'NONE', #79836, #24123, #47980, .T. ) ; +#80225 = CONICAL_SURFACE ( 'NONE', #41445, 10.00000000000009200, 0.7853981633974447300 ) ; +#80226 = EDGE_LOOP ( 'NONE', ( #31277, #29297, #66409, #28012 ) ) ; +#80227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80229 = FACE_OUTER_BOUND ( 'NONE', #71923, .T. ) ; +#80230 = AXIS2_PLACEMENT_3D ( 'NONE', #43564, #6336, #49800 ) ; +#80231 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 49.86203212531317800, -28.38801640354855800 ) ) ; +#80232 = ORIENTED_EDGE ( 'NONE', *, *, #76435, .T. ) ; +#80233 = VERTEX_POINT ( 'NONE', #47616 ) ; +#80234 = ORIENTED_EDGE ( 'NONE', *, *, #5212, .T. ) ; +#80235 = ORIENTED_EDGE ( 'NONE', *, *, #28725, .F. ) ; +#80236 = VERTEX_POINT ( 'NONE', #66168 ) ; +#80237 = CARTESIAN_POINT ( 'NONE', ( 9.495236841534572000, 40.60079448659599400, -28.70555803802996700 ) ) ; +#80238 = VERTEX_POINT ( 'NONE', #53898 ) ; +#80239 = CARTESIAN_POINT ( 'NONE', ( 15.88358847658370700, 81.44848545218980000, -28.67627428870429500 ) ) ; +#80240 = FACE_OUTER_BOUND ( 'NONE', #5398, .T. ) ; +#80241 = CARTESIAN_POINT ( 'NONE', ( 9.452258779925626800, 48.81967837323414000, -28.55467576046958200 ) ) ; +#80242 = CARTESIAN_POINT ( 'NONE', ( 11.34479765123139900, 40.81139552890326200, -28.53900456328673500 ) ) ; +#80243 = CARTESIAN_POINT ( 'NONE', ( 17.79220243841309900, 51.43650294695080300, -28.30782889147504400 ) ) ; +#80244 = ADVANCED_FACE ( 'NONE', ( #321 ), #28943, .T. ) ; +#80245 = EDGE_LOOP ( 'NONE', ( #39108, #69070, #13176 ) ) ; +#80246 = EDGE_LOOP ( 'NONE', ( #51010, #21833, #78015, #57982 ) ) ; +#80247 = EDGE_CURVE ( 'NONE', #74319, #50025, #69946, .T. ) ; +#80248 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000006200, 40.29999999999999000, -28.20555803802996700 ) ) ; +#80249 = ORIENTED_EDGE ( 'NONE', *, *, #39430, .F. ) ; +#80250 = CIRCLE ( 'NONE', #40846, 10.50000000000009800 ) ; +#80251 = EDGE_CURVE ( 'NONE', #52899, #19932, #31490, .T. ) ; +#80252 = ADVANCED_FACE ( 'NONE', ( #79186 ), #29562, .T. ) ; +#80253 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, -2.833333333333328600, 3.794441961969996900 ) ) ; +#80254 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80255 = EDGE_CURVE ( 'NONE', #68448, #77167, #55499, .T. ) ; +#80256 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 37.33333333333334300, 5.722645192245503900 ) ) ; +#80257 = EDGE_CURVE ( 'NONE', #30469, #22705, #41044, .T. ) ; +#80258 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #17294, #36069, #5043, #48532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.346460914202333800E-007, 0.0008482521192577220500 ), + .UNSPECIFIED. ) ; +#80259 = CARTESIAN_POINT ( 'NONE', ( 1.314034490221690500, 35.04999999999997600, -28.37321477197629700 ) ) ; +#80260 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80261 = FACE_OUTER_BOUND ( 'NONE', #40674, .T. ) ; +#80262 = ADVANCED_FACE ( 'NONE', ( #43162 ), #44073, .T. ) ; +#80263 = CARTESIAN_POINT ( 'NONE', ( 17.38231690878860600, 20.70496220355532600, -28.41840204704135100 ) ) ; +#80264 = ADVANCED_FACE ( 'NONE', ( #46034 ), #11036, .F. ) ; +#80265 = CARTESIAN_POINT ( 'NONE', ( -5.856406460551008700, 2.500000000000022200, -7.061964498581016200 ) ) ; +#80266 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#80267 = EDGE_LOOP ( 'NONE', ( #75379, #18241, #77345 ) ) ; +#80268 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 60.79999999999999000, -28.70555803802997700 ) ) ; +#80269 = AXIS2_PLACEMENT_3D ( 'NONE', #57603, #20346, #63880 ) ; +#80270 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #70352, #14621, #64419, #27136 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.051880083047319200E-007, 0.0003101809493098227700 ), + .UNSPECIFIED. ) ; +#80272 = ORIENTED_EDGE ( 'NONE', *, *, #9734, .F. ) ; +#80271 = EDGE_CURVE ( 'NONE', #40718, #4205, #26608, .T. ) ; +#80273 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#80274 = EDGE_CURVE ( 'NONE', #10766, #79993, #77208, .T. ) ; +#80275 = EDGE_CURVE ( 'NONE', #64449, #71810, #27590, .T. ) ; +#80276 = ORIENTED_EDGE ( 'NONE', *, *, #54935, .T. ) ; +#80277 = ADVANCED_FACE ( 'NONE', ( #35412 ), #25649, .F. ) ; +#80278 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965576400, 31.17701665379185600, -28.20555803802995200 ) ) ; +#80279 = CARTESIAN_POINT ( 'NONE', ( -4.044903623432830400, 41.24660241562190100, -28.20555803802996700 ) ) ; +#80280 = CARTESIAN_POINT ( 'NONE', ( -12.38315603019277900, 54.80000000000008200, -28.70555803802997700 ) ) ; +#80281 = FACE_OUTER_BOUND ( 'NONE', #17488, .T. ) ; +#80282 = PLANE ( 'NONE', #66519 ) ; +#80283 = CIRCLE ( 'NONE', #4881, 10.00000000000009200 ) ; +#80284 = ORIENTED_EDGE ( 'NONE', *, *, #19354, .T. ) ; +#80285 = AXIS2_PLACEMENT_3D ( 'NONE', #15163, #58674, #21445 ) ; +#80286 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 70.79999999999998300, -28.70555803802997700 ) ) ; +#80287 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.70555803802994200 ) ) ; +#80288 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #73613, #11606, #30390, #73895 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881202211249000E-007, 0.0008724366121407015000 ), + .UNSPECIFIED. ) ; +#80289 = CONICAL_SURFACE ( 'NONE', #65696, 10.00000000000009200, 0.7853981633974447300 ) ; +#80290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80291 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80292 = CONICAL_SURFACE ( 'NONE', #17379, 10.00000000000009200, 0.7853981633974447300 ) ; +#80293 = CARTESIAN_POINT ( 'NONE', ( -3.344021389389329800, 8.107395204316761200, -28.54957942741934200 ) ) ; +#80294 = EDGE_LOOP ( 'NONE', ( #40237, #61621, #62229 ) ) ; +#80295 = CARTESIAN_POINT ( 'NONE', ( -1.498152090609175200, 23.91466791010178400, -28.53910738522650100 ) ) ; +#80296 = EDGE_CURVE ( 'NONE', #37167, #63100, #12132, .T. ) ; +#80298 = ORIENTED_EDGE ( 'NONE', *, *, #5298, .F. ) ; +#80297 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000009800, 48.12623792124938400, -28.70555803802996700 ) ) ; +#80299 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80300 = CARTESIAN_POINT ( 'NONE', ( 15.51102226527470900, 45.23928571352698200, -28.36868303842829800 ) ) ; +#80301 = AXIS2_PLACEMENT_3D ( 'NONE', #54694, #17446, #60974 ) ; +#80302 = AXIS2_PLACEMENT_3D ( 'NONE', #556, #44054, #6831 ) ; +#80303 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.20555803802997700 ) ) ; +#80305 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19070, #12845, #74583, #62604 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.299829866823131200E-007, 0.001076778502991253900 ), + .UNSPECIFIED. ) ; +#80304 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#80306 = CARTESIAN_POINT ( 'NONE', ( 16.95509637656717000, 41.24660241562189400, -28.20555803802996700 ) ) ; +#80307 = FACE_OUTER_BOUND ( 'NONE', #69239, .T. ) ; +#80308 = CARTESIAN_POINT ( 'NONE', ( -9.963744891819203500, 71.65075715145309200, -28.20555803802997700 ) ) ; +#80309 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 61.43250300240229200, -28.20555803802997700 ) ) ; +#80310 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.20555803802994200 ) ) ; +#80311 = ORIENTED_EDGE ( 'NONE', *, *, #37974, .T. ) ; +#80312 = LINE ( 'NONE', #42522, #74464 ) ; +#80313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80314 = ORIENTED_EDGE ( 'NONE', *, *, #62538, .F. ) ; +#80315 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000400, 19.25227248018356000, -28.70555803802997400 ) ) ; +#80316 = ORIENTED_EDGE ( 'NONE', *, *, #2922, .T. ) ; +#80317 = CARTESIAN_POINT ( 'NONE', ( -9.904737509655543400, 41.67701665379215800, -28.20555803802997400 ) ) ; +#80318 = VERTEX_POINT ( 'NONE', #73761 ) ; +#80319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80320 = ORIENTED_EDGE ( 'NONE', *, *, #80723, .F. ) ; +#80321 = CARTESIAN_POINT ( 'NONE', ( 10.36059854261447600, 28.66749699759768800, -28.25434854811488300 ) ) ; +#80322 = FACE_OUTER_BOUND ( 'NONE', #74260, .T. ) ; +#80323 = CARTESIAN_POINT ( 'NONE', ( -16.62197867252812200, 30.96868088498122200, -28.51286550264512700 ) ) ; +#80324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80325 = ORIENTED_EDGE ( 'NONE', *, *, #69403, .T. ) ; +#80326 = ORIENTED_EDGE ( 'NONE', *, *, #41634, .T. ) ; +#80327 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.20555803803047800 ) ) ; +#80328 = CARTESIAN_POINT ( 'NONE', ( -9.071428571427407700, 41.52858243452166700, -28.70555803802997700 ) ) ; +#80329 = ORIENTED_EDGE ( 'NONE', *, *, #12860, .T. ) ; +#80330 = CIRCLE ( 'NONE', #66004, 10.00000000000009200 ) ; +#80331 = ORIENTED_EDGE ( 'NONE', *, *, #60206, .F. ) ; +#80332 = CIRCLE ( 'NONE', #74701, 10.50000000000009600 ) ; +#80333 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 43.33333333333334300, 2.794441961969998300 ) ) ; +#80334 = CARTESIAN_POINT ( 'NONE', ( 3.985743576842289300, 71.58004100757882800, -28.24987021275311600 ) ) ; +#80335 = AXIS2_PLACEMENT_3D ( 'NONE', #47899, #10672, #54167 ) ; +#80336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80337 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #63591, #69817, #76069, #38783 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0003504124143706620600, 0.0006599881756728328600 ), + .UNSPECIFIED. ) ; +#80338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80339 = ADVANCED_FACE ( 'NONE', ( #42143 ), #73321, .F. ) ; +#80340 = EDGE_CURVE ( 'NONE', #52005, #44696, #78470, .T. ) ; +#80341 = AXIS2_PLACEMENT_3D ( 'NONE', #80415, #43122, #5888 ) ; +#80342 = FACE_OUTER_BOUND ( 'NONE', #23403, .T. ) ; +#80343 = CARTESIAN_POINT ( 'NONE', ( -2.695954216609694100, 60.13716795162660800, -28.48697406221658600 ) ) ; +#80344 = VERTEX_POINT ( 'NONE', #24243 ) ; +#80345 = CONICAL_SURFACE ( 'NONE', #9812, 10.50000000000009600, 0.7853981633974500600 ) ; +#80346 = ADVANCED_FACE ( 'NONE', ( #75257 ), #61262, .T. ) ; +#80347 = ORIENTED_EDGE ( 'NONE', *, *, #28108, .T. ) ; +#80348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80349 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.20555803802997700 ) ) ; +#80350 = CARTESIAN_POINT ( 'NONE', ( -1.660254037844441900, 55.79999999999975600, -28.20555803803014400 ) ) ; +#80351 = CARTESIAN_POINT ( 'NONE', ( 2.904737509655695300, 10.17701665379238400, -28.20555803802992800 ) ) ; +#80352 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 44.13556610137280200, -28.54207364681942100 ) ) ; +#80353 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000003600, 14.66666666666668000, -10.73183747965883100 ) ) ; +#80354 = CARTESIAN_POINT ( 'NONE', ( 2.071428571428562700, 18.07141756547875700, -28.70555803803009500 ) ) ; +#80355 = FACE_OUTER_BOUND ( 'NONE', #37621, .T. ) ; +#80356 = CARTESIAN_POINT ( 'NONE', ( 3.642865939492640600, 38.57379779496234600, -28.70555803802995200 ) ) ; +#80357 = CONICAL_SURFACE ( 'NONE', #31940, 10.50000000000009600, 0.7853981633974500600 ) ; +#80358 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 70.79999999999998300, -28.70555803802997700 ) ) ; +#80360 = EDGE_CURVE ( 'NONE', #10766, #48984, #64007, .T. ) ; +#80359 = ORIENTED_EDGE ( 'NONE', *, *, #25292, .F. ) ; +#80361 = ADVANCED_FACE ( 'NONE', ( #60686 ), #23695, .T. ) ; +#80362 = EDGE_CURVE ( 'NONE', #32707, #25229, #40199, .T. ) ; +#80363 = CIRCLE ( 'NONE', #47900, 10.50000000000009600 ) ; +#80364 = CARTESIAN_POINT ( 'NONE', ( -3.985743576841978400, 61.58004100757876400, -28.24987021275305600 ) ) ; +#80365 = ORIENTED_EDGE ( 'NONE', *, *, #44701, .T. ) ; +#80366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80367 = CARTESIAN_POINT ( 'NONE', ( 15.86238361814052100, 28.42067263347055200, -28.67075088557350400 ) ) ; +#80368 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 80.79999999999998300, -28.20555803802997700 ) ) ; +#80369 = ORIENTED_EDGE ( 'NONE', *, *, #71701, .F. ) ; +#80370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80371 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #78435, #78156, #3871, #47368 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.310983721098790900E-007, 0.001076779618376919300 ), + .UNSPECIFIED. ) ; +#80372 = EDGE_CURVE ( 'NONE', #77979, #16691, #9038, .T. ) ; +#80373 = CIRCLE ( 'NONE', #54541, 9.500000000000097700 ) ; +#80374 = ADVANCED_FACE ( 'NONE', ( #56751 ), #38234, .F. ) ; +#80375 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999300, 81.43250300240228500, -28.20555803802997700 ) ) ; +#80376 = EDGE_CURVE ( 'NONE', #39110, #71934, #49471, .T. ) ; +#80378 = FACE_OUTER_BOUND ( 'NONE', #57743, .T. ) ; +#80377 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448975300, 46.16666666666668600, -9.205558038030005700 ) ) ; +#80379 = AXIS2_PLACEMENT_3D ( 'NONE', #73571, #36295, #79825 ) ; +#80380 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80381 = ORIENTED_EDGE ( 'NONE', *, *, #27175, .T. ) ; +#80382 = CARTESIAN_POINT ( 'NONE', ( 1.339745962155622200, 49.16666666666667100, 3.794441961969996900 ) ) ; +#80383 = EDGE_CURVE ( 'NONE', #22567, #58834, #62622, .T. ) ; +#80384 = ORIENTED_EDGE ( 'NONE', *, *, #54311, .T. ) ; +#80385 = CARTESIAN_POINT ( 'NONE', ( -10.43170730348812800, 61.99560977511662700, -28.70555803802997700 ) ) ; +#80386 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999999600, 50.79999999999999000, -28.20555803802997700 ) ) ; +#80387 = EDGE_LOOP ( 'NONE', ( #62607, #62548, #48154, #32675, #20943, #32763 ) ) ; +#80388 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#80389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #21628, #27612, #34125, #77626 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.570641853934424500E-007, 0.0008759659331882802600 ), + .UNSPECIFIED. ) ; +#80390 = ORIENTED_EDGE ( 'NONE', *, *, #40275, .T. ) ; +#80391 = ORIENTED_EDGE ( 'NONE', *, *, #5002, .T. ) ; +#80392 = CARTESIAN_POINT ( 'NONE', ( 5.200545803703474400, 44.44999999999998900, 4.873448734756340900 ) ) ; +#80393 = VERTEX_POINT ( 'NONE', #68565 ) ; +#80394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80396 = ADVANCED_FACE ( 'NONE', ( #71356 ), #69395, .T. ) ; +#80397 = FACE_OUTER_BOUND ( 'NONE', #53622, .T. ) ; +#80398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80399 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#80401 = EDGE_LOOP ( 'NONE', ( #11683, #3235, #8026, #7707, #49464, #29610, #21505, #59205 ) ) ; +#80400 = CARTESIAN_POINT ( 'NONE', ( 3.985743576842282200, 61.58004100757882100, -28.24987021275312300 ) ) ; +#80402 = AXIS2_PLACEMENT_3D ( 'NONE', #13577, #57082, #19819 ) ; +#80403 = CARTESIAN_POINT ( 'NONE', ( -6.523705133725655100, 87.93535825203923700, -28.53896444442201400 ) ) ; +#80404 = EDGE_LOOP ( 'NONE', ( #44990, #28476, #33672 ) ) ; +#80405 = EDGE_CURVE ( 'NONE', #19594, #71659, #35093, .T. ) ; +#80406 = CARTESIAN_POINT ( 'NONE', ( -4.036255108180791100, 59.94924284854687400, -28.20555803802997700 ) ) ; +#80407 = EDGE_CURVE ( 'NONE', #70151, #35478, #54796, .T. ) ; +#80408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80409 = EDGE_CURVE ( 'NONE', #65165, #49007, #20607, .T. ) ; +#80410 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, 22.42856308690589600, -28.36981695106777900 ) ) ; +#80411 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000700, 39.34510448120794000, -28.37193179497694500 ) ) ; +#80412 = VERTEX_POINT ( 'NONE', #12823 ) ; +#80413 = CIRCLE ( 'NONE', #41449, 10.00000000000009400 ) ; +#80414 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000043200, 78.39962244433164100, -28.53664883431660100 ) ) ; +#80415 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 70.79999999999985500, -28.20555803803014400 ) ) ; +#80416 = CARTESIAN_POINT ( 'NONE', ( 4.722391605212648000, 50.55000000000001100, -28.70555803803009800 ) ) ; +#80417 = AXIS2_PLACEMENT_3D ( 'NONE', #10446, #53946, #16702 ) ; +#80418 = ORIENTED_EDGE ( 'NONE', *, *, #15813, .T. ) ; +#80419 = CONICAL_SURFACE ( 'NONE', #37604, 10.00000000000009200, 0.7853981633974447300 ) ; +#80420 = CARTESIAN_POINT ( 'NONE', ( 16.96374489181919300, 89.94924284854654700, -28.20555803803014400 ) ) ; +#80421 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80422 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80423 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80424 = AXIS2_PLACEMENT_3D ( 'NONE', #13540, #19783, #987 ) ; +#80425 = AXIS2_PLACEMENT_3D ( 'NONE', #63992, #26723, #70196 ) ; +#80426 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80427 = CARTESIAN_POINT ( 'NONE', ( -16.62080236466620100, 18.83106028708544600, -28.57333386111662700 ) ) ; +#80428 = CARTESIAN_POINT ( 'NONE', ( 2.955096376567176700, 20.24660241562181900, -28.20555803802994200 ) ) ; +#80429 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 26.66545993132819000, -28.70555803802997700 ) ) ; +#80430 = EDGE_LOOP ( 'NONE', ( #1696, #39487, #9768, #16836 ) ) ; +#80431 = CYLINDRICAL_SURFACE ( 'NONE', #3691, 10.00000000000000200 ) ; +#80433 = ORIENTED_EDGE ( 'NONE', *, *, #59138, .T. ) ; +#80432 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#80434 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257646000, 55.50000000000000700, -9.258116921287651700 ) ) ; +#80435 = FACE_OUTER_BOUND ( 'NONE', #46466, .T. ) ; +#80436 = ORIENTED_EDGE ( 'NONE', *, *, #42941, .F. ) ; +#80437 = CIRCLE ( 'NONE', #18622, 10.00000000000009600 ) ; +#80438 = CARTESIAN_POINT ( 'NONE', ( 4.330127018922200800, 20.66666666666667500, 1.294441961969997200 ) ) ; +#80439 = AXIS2_PLACEMENT_3D ( 'NONE', #26900, #70391, #33142 ) ; +#80440 = ORIENTED_EDGE ( 'NONE', *, *, #9661, .T. ) ; +#80441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #46028, #2511, #39792, #52273 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.123859815790132900E-007, 0.0007763385940576964900 ), + .UNSPECIFIED. ) ; +#80442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80443 = CONICAL_SURFACE ( 'NONE', #70253, 10.50000000000009600, 0.7853981633974500600 ) ; +#80444 = FACE_OUTER_BOUND ( 'NONE', #5726, .T. ) ; +#80445 = VERTEX_POINT ( 'NONE', #6808 ) ; +#80446 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80447 = EDGE_CURVE ( 'NONE', #64, #73484, #6129, .T. ) ; +#80448 = CARTESIAN_POINT ( 'NONE', ( -10.99999999999999500, 23.00000000000000400, -1.205558038030002800 ) ) ; +#80449 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 37.17143691309409100, -28.36981695106778300 ) ) ; +#80450 = AXIS2_PLACEMENT_3D ( 'NONE', #3205, #54093, #40472 ) ; +#80451 = ORIENTED_EDGE ( 'NONE', *, *, #30182, .T. ) ; +#80452 = CARTESIAN_POINT ( 'NONE', ( -9.811079983385084800, 31.10677350908850500, -28.30799595738892900 ) ) ; +#80453 = PLANE ( 'NONE', #63191 ) ; +#80454 = ORIENTED_EDGE ( 'NONE', *, *, #9733, .F. ) ; +#80455 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000045100, 90.16749699759738200, -28.20555803803047800 ) ) ; +#80456 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999500, 101.5999999999999900, -28.70555803803001300 ) ) ; +#80457 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 60.79999999999999000, -28.70555803802997700 ) ) ; +#80458 = CARTESIAN_POINT ( 'NONE', ( 15.62012925194910000, 86.76150692817282100, -28.68631150211663100 ) ) ; +#80459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80460 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999994700, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80461 = CIRCLE ( 'NONE', #22044, 9.500000000000099500 ) ; +#80462 = ORIENTED_EDGE ( 'NONE', *, *, #69110, .F. ) ; +#80463 = AXIS2_PLACEMENT_3D ( 'NONE', #62346, #12576, #18818 ) ; +#80464 = CARTESIAN_POINT ( 'NONE', ( 11.37802132747187000, 20.46868088498121800, -28.51286550264510200 ) ) ; +#80465 = CARTESIAN_POINT ( 'NONE', ( -16.65384615384629900, 80.79999999999998300, -28.55171188418376700 ) ) ; +#80466 = VERTEX_POINT ( 'NONE', #38057 ) ; +#80467 = ADVANCED_FACE ( 'NONE', ( #7108 ), #19775, .T. ) ; +#80468 = ORIENTED_EDGE ( 'NONE', *, *, #56052, .T. ) ; +#80469 = ORIENTED_EDGE ( 'NONE', *, *, #63931, .F. ) ; +#80470 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #60489, #29253, #29505, #72993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0002797115611122428600, 0.0005538854015461350500 ), + .UNSPECIFIED. ) ; +#80471 = VERTEX_POINT ( 'NONE', #56848 ) ; +#80472 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80473 = CARTESIAN_POINT ( 'NONE', ( 8.511022265274711200, 14.05000000000000400, -28.20555803802992800 ) ) ; +#80474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80475 = CARTESIAN_POINT ( 'NONE', ( 16.90473750965577100, 10.17701665379167200, -28.20555803803009500 ) ) ; +#80476 = ADVANCED_FACE ( 'NONE', ( #52842 ), #67462, .T. ) ; +#80477 = CONICAL_SURFACE ( 'NONE', #33348, 10.50000000000009600, 0.7853981633974500600 ) ; +#80478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80479 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #77845, #28103, #59353, #22099 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.066629353298044800E-007, 0.0007670609591623583300 ), + .UNSPECIFIED. ) ; +#80480 = ORIENTED_EDGE ( 'NONE', *, *, #18067, .F. ) ; +#80481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80482 = ADVANCED_FACE ( 'NONE', ( #58710 ), #34368, .F. ) ; +#80483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80484 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80485 = ORIENTED_EDGE ( 'NONE', *, *, #47849, .F. ) ; +#80486 = CARTESIAN_POINT ( 'NONE', ( 2.093266739736722400, 24.54999999999999700, -28.70555803802994200 ) ) ; +#80487 = CONICAL_SURFACE ( 'NONE', #16912, 10.00000000000009400, 0.7853981633974447300 ) ; +#80488 = EDGE_LOOP ( 'NONE', ( #14985, #56376, #70917, #41878, #20191, #24591, #25206 ) ) ; +#80489 = EDGE_CURVE ( 'NONE', #70070, #8073, #50870, .T. ) ; +#80490 = CARTESIAN_POINT ( 'NONE', ( 5.856406460551025500, 26.50000000000001400, -7.061964498581022400 ) ) ; +#80491 = CARTESIAN_POINT ( 'NONE', ( 4.547741220074341200, 27.81967837323420100, -28.55467576046953200 ) ) ; +#80492 = EDGE_LOOP ( 'NONE', ( #31559, #15450, #8729 ) ) ; +#80493 = EDGE_CURVE ( 'NONE', #10125, #33093, #21738, .T. ) ; +#80494 = FACE_OUTER_BOUND ( 'NONE', #11937, .T. ) ; +#80495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36762, #74060, #49250, #12042 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.220838145164597600E-007, 0.0004559721418122365100 ), + .UNSPECIFIED. ) ; +#80496 = CIRCLE ( 'NONE', #8936, 10.50000000000009600 ) ; +#80497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#80498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80501 = EDGE_CURVE ( 'NONE', #80546, #56250, #12992, .T. ) ; +#80502 = ORIENTED_EDGE ( 'NONE', *, *, #9596, .T. ) ; +#80503 = CARTESIAN_POINT ( 'NONE', ( 15.89670794580937500, 11.23263087059568800, -28.67620115463452600 ) ) ; +#80504 = CARTESIAN_POINT ( 'NONE', ( -17.79220243841384900, 60.16349705304866500, -28.30782889147482400 ) ) ; +#80505 = EDGE_CURVE ( 'NONE', #5994, #37317, #36309, .T. ) ; +#80506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80507 = EDGE_CURVE ( 'NONE', #66928, #48441, #72480, .T. ) ; +#80508 = CONICAL_SURFACE ( 'NONE', #51568, 10.00000000000009200, 0.7853981633974447300 ) ; +#80509 = EDGE_LOOP ( 'NONE', ( #64965, #36512, #67610, #20822 ) ) ; +#80510 = ORIENTED_EDGE ( 'NONE', *, *, #46630, .T. ) ; +#80511 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80512 = ORIENTED_EDGE ( 'NONE', *, *, #6162, .F. ) ; +#80513 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003200, 81.35277818615382700, -28.70555803803016200 ) ) ; +#80514 = ORIENTED_EDGE ( 'NONE', *, *, #66798, .F. ) ; +#80515 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80516 = CONICAL_SURFACE ( 'NONE', #58173, 10.00000000000009400, 0.7853981633974447300 ) ; +#80517 = AXIS2_PLACEMENT_3D ( 'NONE', #35356, #47805, #10586 ) ; +#80518 = EDGE_CURVE ( 'NONE', #75931, #59550, #3204, .T. ) ; +#80519 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#80520 = EDGE_CURVE ( 'NONE', #10656, #32445, #57991, .T. ) ; +#80521 = ORIENTED_EDGE ( 'NONE', *, *, #80376, .T. ) ; +#80522 = EDGE_CURVE ( 'NONE', #54184, #29561, #43498, .T. ) ; +#80523 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #32204, #69456, #44655, #7430 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.915470527016346500E-007, 0.0007303749718167622600 ), + .UNSPECIFIED. ) ; +#80524 = AXIS2_PLACEMENT_3D ( 'NONE', #69721, #57218, #32460 ) ; +#80525 = CIRCLE ( 'NONE', #19279, 10.00000000000009200 ) ; +#80526 = ORIENTED_EDGE ( 'NONE', *, *, #16159, .F. ) ; +#80527 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80528 = VERTEX_POINT ( 'NONE', #20403 ) ; +#80529 = AXIS2_PLACEMENT_3D ( 'NONE', #10130, #22366, #53640 ) ; +#80530 = CARTESIAN_POINT ( 'NONE', ( -1.339745962155608700, 70.16666666666668600, -6.205558038030004800 ) ) ; +#80531 = AXIS2_PLACEMENT_3D ( 'NONE', #39377, #76646, #8095 ) ; +#80532 = AXIS2_PLACEMENT_3D ( 'NONE', #71289, #34028, #77543 ) ; +#80533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80534 = CARTESIAN_POINT ( 'NONE', ( -2.143593539448976700, 35.16666666666665700, -9.205558038030003900 ) ) ; +#80535 = FACE_OUTER_BOUND ( 'NONE', #55638, .T. ) ; +#80536 = FACE_OUTER_BOUND ( 'NONE', #42157, .T. ) ; +#80537 = ORIENTED_EDGE ( 'NONE', *, *, #15968, .F. ) ; +#80538 = ORIENTED_EDGE ( 'NONE', *, *, #31420, .F. ) ; +#80539 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80540 = EDGE_LOOP ( 'NONE', ( #27900, #76175, #39075, #33934 ) ) ; +#80541 = ORIENTED_EDGE ( 'NONE', *, *, #75239, .T. ) ; +#80542 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000010700, 0.3333333333333382600, 5.722645192245503900 ) ) ; +#80543 = ORIENTED_EDGE ( 'NONE', *, *, #24391, .T. ) ; +#80544 = AXIS2_PLACEMENT_3D ( 'NONE', #19458, #38184, #25735 ) ; +#80545 = CARTESIAN_POINT ( 'NONE', ( 12.52766439985148100, 13.09761904761851200, -28.70555803803042500 ) ) ; +#80546 = VERTEX_POINT ( 'NONE', #70150 ) ; +#80547 = EDGE_CURVE ( 'NONE', #24328, #5650, #29127, .T. ) ; +#80548 = CARTESIAN_POINT ( 'NONE', ( -10.63940720644213800, 28.66749699759768400, -28.25435056028469200 ) ) ; +#80549 = ADVANCED_FACE ( 'NONE', ( #5172 ), #80101, .F. ) ; +#80550 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999993800, 15.46443389862661600, -28.54207364681987300 ) ) ; +#80551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#80552 = FACE_OUTER_BOUND ( 'NONE', #8681, .T. ) ; +#80553 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000008900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#80554 = ORIENTED_EDGE ( 'NONE', *, *, #39378, .T. ) ; +#80555 = ORIENTED_EDGE ( 'NONE', *, *, #72885, .F. ) ; +#80556 = CARTESIAN_POINT ( 'NONE', ( -3.081981805489637100, 18.15930907398619700, -28.35186440610855000 ) ) ; +#80557 = EDGE_CURVE ( 'NONE', #2253, #41582, #14612, .T. ) ; +#80558 = VERTEX_POINT ( 'NONE', #33172 ) ; +#80559 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#80560 = CARTESIAN_POINT ( 'NONE', ( -12.48897773472527100, 24.54999999999997600, -28.20555803802994200 ) ) ; +#80561 = AXIS2_PLACEMENT_3D ( 'NONE', #19105, #62637, #25397 ) ; +#80562 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #39554, #45500, #70826, #33574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0007016841775791113000, 0.0009605145132139155800 ), + .UNSPECIFIED. ) ; +#80563 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.20555803803014400 ) ) ; +#80564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80565 = FACE_OUTER_BOUND ( 'NONE', #32050, .T. ) ; +#80566 = ADVANCED_FACE ( 'NONE', ( #1251 ), #46973, .F. ) ; +#80567 = CARTESIAN_POINT ( 'NONE', ( 3.918018194510343400, 41.44069092601377900, -28.35186440610859600 ) ) ; +#80568 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 60.79999999999950700, -28.70555803803047500 ) ) ; +#80569 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 81.96823913367204300, -28.70555803802997700 ) ) ; +#80570 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80571 = ORIENTED_EDGE ( 'NONE', *, *, #60255, .T. ) ; +#80572 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80573 = CARTESIAN_POINT ( 'NONE', ( -5.527664399851639500, 13.09761904761934700, -28.70555803802992800 ) ) ; +#80574 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80575 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#80576 = AXIS2_PLACEMENT_3D ( 'NONE', #71904, #40873, #78149 ) ; +#80577 = CARTESIAN_POINT ( 'NONE', ( 0.7142857142855320000, 73.67681279774480200, -28.70555803802997700 ) ) ; +#80578 = CONICAL_SURFACE ( 'NONE', #68770, 10.50000000000009800, 0.7853981633974500600 ) ; +#80579 = ORIENTED_EDGE ( 'NONE', *, *, #26211, .T. ) ; +#80580 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 70.79999999999967000, -28.20555803803030800 ) ) ; +#80581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80582 = EDGE_LOOP ( 'NONE', ( #32690, #79786, #10381 ) ) ; +#80583 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965600, 28.65930907398619700, -28.35186440610856500 ) ) ; +#80584 = CONICAL_SURFACE ( 'NONE', #75339, 10.50000000000009600, 0.7853981633974482800 ) ; +#80585 = CARTESIAN_POINT ( 'NONE', ( 21.00000000000000400, 80.79999999999951400, -28.70555803803047500 ) ) ; +#80586 = CARTESIAN_POINT ( 'NONE', ( -10.88532851782524000, 70.16054007504466500, -28.34042301926881500 ) ) ; +#80587 = AXIS2_PLACEMENT_3D ( 'NONE', #64579, #70793, #21048 ) ; +#80588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80589 = ADVANCED_FACE ( 'NONE', ( #17827 ), #13931, .T. ) ; +#80590 = EDGE_CURVE ( 'NONE', #58920, #39390, #132, .T. ) ; +#80591 = CONICAL_SURFACE ( 'NONE', #79690, 10.00000000000009400, 0.7853981633974447300 ) ; +#80592 = VERTEX_POINT ( 'NONE', #9799 ) ; +#80593 = CARTESIAN_POINT ( 'NONE', ( -15.16936139502961500, 46.90150809589756200, -28.70555803803001600 ) ) ; +#80594 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000007100, 41.16666666666665700, -3.349151577478988200 ) ) ; +#80595 = VERTEX_POINT ( 'NONE', #22303 ) ; +#80596 = CARTESIAN_POINT ( 'NONE', ( -17.32934156052460800, 80.46865661974089800, -28.43089930266685500 ) ) ; +#80597 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999992900, 58.17143691309409100, -28.36981695106780800 ) ) ; +#80598 = CARTESIAN_POINT ( 'NONE', ( 10.50000000000000500, 41.25489551879204700, -28.37193179497697300 ) ) ; +#80599 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36870, #55650, #37144, #80683 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.489881207938289700E-007, 0.0008724366121409707000 ), + .UNSPECIFIED. ) ; +#80600 = FACE_OUTER_BOUND ( 'NONE', #10986, .T. ) ; +#80601 = FACE_OUTER_BOUND ( 'NONE', #50242, .T. ) ; +#80602 = ORIENTED_EDGE ( 'NONE', *, *, #16759, .F. ) ; +#80604 = EDGE_CURVE ( 'NONE', #28113, #33338, #65540, .T. ) ; +#80603 = ORIENTED_EDGE ( 'NONE', *, *, #46006, .T. ) ; +#80605 = ORIENTED_EDGE ( 'NONE', *, *, #38496, .F. ) ; +#80606 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.70555803802995200 ) ) ; +#80607 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #24686, #61964, #68187, #30947 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.402625871346379700E-007, 0.0002930369617398842300 ), + .UNSPECIFIED. ) ; +#80608 = ORIENTED_EDGE ( 'NONE', *, *, #76652, .T. ) ; +#80609 = EDGE_LOOP ( 'NONE', ( #20406, #55067, #69974, #12877, #68506 ) ) ; +#80610 = ORIENTED_EDGE ( 'NONE', *, *, #54663, .F. ) ; +#80611 = ORIENTED_EDGE ( 'NONE', *, *, #16305, .F. ) ; +#80612 = ORIENTED_EDGE ( 'NONE', *, *, #63096, .T. ) ; +#80613 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53087, #65636, #34627, #78131 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.838611718707455900E-007, 0.0002592600401777326000 ), + .UNSPECIFIED. ) ; +#80614 = AXIS2_PLACEMENT_3D ( 'NONE', #65220, #27956, #71434 ) ; +#80615 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ; +#80616 = EDGE_CURVE ( 'NONE', #4982, #46181, #66480, .T. ) ; +#80617 = EDGE_CURVE ( 'NONE', #38695, #54691, #32413, .T. ) ; +#80618 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000700, 29.79999999999999000, -28.70555803802995200 ) ) ; +#80619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80621 = CARTESIAN_POINT ( 'NONE', ( -16.32232026310476100, 41.49769010897086500, -28.61774594594330900 ) ) ; +#80622 = CARTESIAN_POINT ( 'NONE', ( -8.052558883257642500, 12.50000000000001200, 6.847000845227646500 ) ) ; +#80623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7096, #63431, #1372, #44860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.037019574859658900E-007, 0.0004669842289003639800 ), + .UNSPECIFIED. ) ; +#80624 = EDGE_CURVE ( 'NONE', #46657, #58896, #51957, .T. ) ; +#80625 = FACE_OUTER_BOUND ( 'NONE', #33323, .T. ) ; +#80626 = AXIS2_PLACEMENT_3D ( 'NONE', #32909, #51643, #14425 ) ; +#80627 = ORIENTED_EDGE ( 'NONE', *, *, #47937, .F. ) ; +#80628 = CARTESIAN_POINT ( 'NONE', ( -17.15784271410176500, 61.13951010012875300, -28.36889022317247500 ) ) ; +#80629 = ORIENTED_EDGE ( 'NONE', *, *, #6974, .F. ) ; +#80630 = ORIENTED_EDGE ( 'NONE', *, *, #35186, .T. ) ; +#80631 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80632 = VERTEX_POINT ( 'NONE', #53843 ) ; +#80633 = CARTESIAN_POINT ( 'NONE', ( 12.48897773472530700, 45.55000000000000400, -28.20555803802996700 ) ) ; +#80634 = CARTESIAN_POINT ( 'NONE', ( 3.483152803492457900, 40.89456479767169800, -28.70555803802996700 ) ) ; +#80635 = FACE_OUTER_BOUND ( 'NONE', #54637, .T. ) ; +#80636 = AXIS2_PLACEMENT_3D ( 'NONE', #71528, #34262, #77769 ) ; +#80637 = AXIS2_PLACEMENT_3D ( 'NONE', #19367, #62911, #25651 ) ; +#80638 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000500, 50.79999999999999000, -28.70555803802997700 ) ) ; +#80639 = EDGE_LOOP ( 'NONE', ( #69432, #34350, #26134, #73754, #77791, #22993, #10860, #75681 ) ) ; +#80640 = EDGE_CURVE ( 'NONE', #74917, #23588, #37509, .T. ) ; +#80641 = ADVANCED_FACE ( 'NONE', ( #15862 ), #28564, .F. ) ; +#80642 = AXIS2_PLACEMENT_3D ( 'NONE', #8898, #52415, #15186 ) ; +#80643 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80644 = CARTESIAN_POINT ( 'NONE', ( 7.714285714285728600, 36.92318720225497900, -28.70555803802995200 ) ) ; +#80645 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 47.00000000000001400, -6.205558038030003100 ) ) ; +#80646 = FACE_OUTER_BOUND ( 'NONE', #55845, .T. ) ; +#80647 = CARTESIAN_POINT ( 'NONE', ( -15.66025403784449400, 75.79999999999999700, -28.20555803802997700 ) ) ; +#80648 = VERTEX_POINT ( 'NONE', #41594 ) ; +#80649 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 84.13556610137280200, -28.54207364681942500 ) ) ; +#80650 = EDGE_LOOP ( 'NONE', ( #29931, #18542, #31924, #9065 ) ) ; +#80651 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4315, #78874, #35352, #10578 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.486823697159532100E-007, 0.0008724363063898964000 ), + .UNSPECIFIED. ) ; +#80652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80653 = ORIENTED_EDGE ( 'NONE', *, *, #72413, .T. ) ; +#80654 = CARTESIAN_POINT ( 'NONE', ( 15.41232936305480000, 10.39604671418360300, -28.70555803803002000 ) ) ; +#80655 = EDGE_CURVE ( 'NONE', #11140, #39176, #45003, .T. ) ; +#80656 = ADVANCED_FACE ( 'NONE', ( #61627 ), #59669, .T. ) ; +#80657 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999993800, 70.16749699759769500, -28.20555803802997700 ) ) ; +#80658 = CARTESIAN_POINT ( 'NONE', ( -18.01499697187867400, 59.99813478817170400, -28.24089224568490800 ) ) ; +#80659 = AXIS2_PLACEMENT_3D ( 'NONE', #29876, #54576, #67089 ) ; +#80660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80661 = AXIS2_PLACEMENT_3D ( 'NONE', #44535, #50814, #38312 ) ; +#80662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80663 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6725, #13007, #56491, #19232 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.107298248878237200E-018, 0.002676326193402476000 ), + .UNSPECIFIED. ) ; +#80664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80665 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80668 = CARTESIAN_POINT ( 'NONE', ( 0.3748010515456873200, 50.55000000000000400, -28.45531454621837100 ) ) ; +#80669 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80670 = CIRCLE ( 'NONE', #11909, 9.500000000000099500 ) ; +#80671 = CARTESIAN_POINT ( 'NONE', ( -14.71428571428571400, 83.67681279774501500, -28.70555803802997700 ) ) ; +#80672 = ADVANCED_FACE ( 'NONE', ( #30489 ), #26585, .F. ) ; +#80673 = ADVANCED_FACE ( 'NONE', ( #76187 ), #74278, .F. ) ; +#80674 = CIRCLE ( 'NONE', #70274, 10.00000000000009200 ) ; +#80675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80676 = EDGE_LOOP ( 'NONE', ( #11540, #47529, #10134, #79181 ) ) ; +#80677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80678 = ORIENTED_EDGE ( 'NONE', *, *, #14600, .F. ) ; +#80679 = CARTESIAN_POINT ( 'NONE', ( -1.272691540716728500, 85.79999999999984100, -28.53979898350176800 ) ) ; +#80680 = CARTESIAN_POINT ( 'NONE', ( -17.31601142792133900, 49.97675710338220500, -28.43415153258098000 ) ) ; +#80681 = CARTESIAN_POINT ( 'NONE', ( -5.383156030192773200, 74.80000000000006800, -28.70555803802997700 ) ) ; +#80682 = CARTESIAN_POINT ( 'NONE', ( 4.044903623432791300, 49.85339758437807900, -28.20555803802996700 ) ) ; +#80683 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 47.44142842854297000, -28.20555803802996700 ) ) ; +#80684 = CARTESIAN_POINT ( 'NONE', ( 2.989537268537169300, 61.25732391202397100, -28.20555803802997700 ) ) ; +#80685 = ADVANCED_FACE ( 'NONE', ( #63577 ), #23383, .T. ) ; +#80686 = CONICAL_SURFACE ( 'NONE', #48769, 10.00000000000009600, 0.7853981633974447300 ) ; +#80687 = ORIENTED_EDGE ( 'NONE', *, *, #76681, .T. ) ; +#80688 = CIRCLE ( 'NONE', #49996, 9.500000000000095900 ) ; +#80689 = AXIS2_PLACEMENT_3D ( 'NONE', #42889, #19252, #62798 ) ; +#80690 = ORIENTED_EDGE ( 'NONE', *, *, #22026, .T. ) ; +#80691 = ORIENTED_EDGE ( 'NONE', *, *, #46358, .F. ) ; +#80692 = VERTEX_POINT ( 'NONE', #42112 ) ; +#80693 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000014200, 53.33333333333335000, 8.320721403598817300 ) ) ; +#80694 = FACE_OUTER_BOUND ( 'NONE', #9670, .T. ) ; +#80695 = ORIENTED_EDGE ( 'NONE', *, *, #5085, .T. ) ; +#80696 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .T. ) ; +#80697 = ORIENTED_EDGE ( 'NONE', *, *, #7346, .F. ) ; +#80699 = VERTEX_POINT ( 'NONE', #17129 ) ; +#80698 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000003400, 70.24722181384551300, -28.70555803803016200 ) ) ; +#80700 = CARTESIAN_POINT ( 'NONE', ( -3.660254037844384200, 18.50000000000000700, -4.865812075874393000 ) ) ; +#80701 = AXIS2_PLACEMENT_3D ( 'NONE', #59568, #53289, #16036 ) ; +#80702 = ORIENTED_EDGE ( 'NONE', *, *, #23423, .F. ) ; +#80703 = CARTESIAN_POINT ( 'NONE', ( 4.191523101122148100, 29.07332680091207400, -28.37233769390153500 ) ) ; +#80704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80705 = EDGE_CURVE ( 'NONE', #40694, #43041, #23096, .T. ) ; +#80706 = CONICAL_SURFACE ( 'NONE', #73018, 10.00000000000009200, 0.7853981633974447300 ) ; +#80707 = ORIENTED_EDGE ( 'NONE', *, *, #63078, .F. ) ; +#80708 = ORIENTED_EDGE ( 'NONE', *, *, #28829, .F. ) ; +#80709 = EDGE_LOOP ( 'NONE', ( #52476, #8831, #67783 ) ) ; +#80710 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36945, #74258, #55706, #18468 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002676095137487877700 ), + .UNSPECIFIED. ) ; +#80711 = ORIENTED_EDGE ( 'NONE', *, *, #26174, .F. ) ; +#80712 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000700, 20.83333333333333600, 1.741883078712340300 ) ) ; +#80713 = EDGE_LOOP ( 'NONE', ( #41631, #3410, #55796, #72325, #78842, #25912, #78397 ) ) ; +#80714 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999300, 29.79999999999999000, -28.20555803802995200 ) ) ; +#80715 = CARTESIAN_POINT ( 'NONE', ( 2.811079983385218000, 28.49322649091141500, -28.30799595738879400 ) ) ; +#80716 = CONICAL_SURFACE ( 'NONE', #59381, 10.50000000000009600, 0.7853981633974500600 ) ; +#80717 = CARTESIAN_POINT ( 'NONE', ( 2.530136888809636700, 9.146957350529760300, -28.66910751791843700 ) ) ; +#80718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80719 = ORIENTED_EDGE ( 'NONE', *, *, #34540, .F. ) ; +#80720 = ORIENTED_EDGE ( 'NONE', *, *, #50174, .T. ) ; +#80721 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #57245, #63526, #38709, #1474 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.001333132141653067000 ), + .UNSPECIFIED. ) ; +#80722 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80723 = EDGE_CURVE ( 'NONE', #30550, #16084, #8592, .T. ) ; +#80724 = CARTESIAN_POINT ( 'NONE', ( -17.49999999999999600, 38.97246552159109700, -28.38801640354855800 ) ) ; +#80725 = CIRCLE ( 'NONE', #1431, 10.00000000000009400 ) ; +#80726 = VERTEX_POINT ( 'NONE', #60927 ) ; +#80727 = EDGE_CURVE ( 'NONE', #70940, #4982, #74946, .T. ) ; +#80728 = CARTESIAN_POINT ( 'NONE', ( -4.035920356936724600, 31.09789380924898000, -28.25343951603329300 ) ) ; +#80729 = ORIENTED_EDGE ( 'NONE', *, *, #73360, .F. ) ; +#80730 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 42.97376207875061000, -28.70555803802997700 ) ) ; +#80731 = CARTESIAN_POINT ( 'NONE', ( -11.44650781702742200, 82.22511094383840200, -28.55192314908416400 ) ) ; +#80732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80733 = PLANE ( 'NONE', #19511 ) ; +#80734 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #19307, #56566, #793, #44282 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.055033215306335900E-007, 0.0006589639548289188800 ), + .UNSPECIFIED. ) ; +#80735 = EDGE_CURVE ( 'NONE', #29595, #25854, #10019, .T. ) ; +#80736 = ADVANCED_FACE ( 'NONE', ( #11978 ), #8033, .T. ) ; +#80737 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80738 = CARTESIAN_POINT ( 'NONE', ( -13.99999999999999500, 80.79999999999998300, -28.20555803802997700 ) ) ; +#80739 = EDGE_CURVE ( 'NONE', #58094, #4221, #60504, .T. ) ; +#80740 = CARTESIAN_POINT ( 'NONE', ( 10.08198180548965400, 49.65930907398620800, -28.35186440610858900 ) ) ; +#80741 = FACE_OUTER_BOUND ( 'NONE', #72738, .T. ) ; +#80742 = CARTESIAN_POINT ( 'NONE', ( -6.928203230275500800, 24.33333333333334600, 2.794441961969998300 ) ) ; +#80743 = CARTESIAN_POINT ( 'NONE', ( -16.63448059171145100, 29.64330698006848800, -28.57107744631859000 ) ) ; +#80744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80745 = FACE_OUTER_BOUND ( 'NONE', #51939, .T. ) ; +#80746 = ORIENTED_EDGE ( 'NONE', *, *, #26328, .F. ) ; +#80747 = ADVANCED_FACE ( 'NONE', ( #43084 ), #55732, .T. ) ; +#80748 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000005300, 80.79999999999982700, -28.70555803803014400 ) ) ; +#80750 = EDGE_LOOP ( 'NONE', ( #75434, #79857, #63939, #18957 ) ) ; +#80749 = CARTESIAN_POINT ( 'NONE', ( 8.645813086124984900, 75.13282980700516600, -28.53914313452738200 ) ) ; +#80751 = AXIS2_PLACEMENT_3D ( 'NONE', #16934, #66702, #78960 ) ; +#80752 = CARTESIAN_POINT ( 'NONE', ( -6.999999999999991100, 19.29999999999999000, -28.70555803802994200 ) ) ; +#80753 = PLANE ( 'NONE', #21731 ) ; +#80754 = EDGE_CURVE ( 'NONE', #58433, #69573, #45981, .T. ) ; +#80755 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #74353, #68079, #36784, #37050 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0001347437747936617900, 0.0005776948474817112300 ), + .UNSPECIFIED. ) ; +#80756 = EDGE_CURVE ( 'NONE', #50539, #41786, #31570, .T. ) ; +#80757 = CARTESIAN_POINT ( 'NONE', ( 4.035920356936735200, 41.59789380924897300, -28.25343951603330700 ) ) ; +#80758 = EDGE_CURVE ( 'NONE', #54691, #77231, #17107, .T. ) ; +#80759 = AXIS2_PLACEMENT_3D ( 'NONE', #61078, #23808, #67317 ) ; +#80760 = FACE_OUTER_BOUND ( 'NONE', #28211, .T. ) ; +#80761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80762 = ORIENTED_EDGE ( 'NONE', *, *, #11817, .T. ) ; +#80763 = FACE_OUTER_BOUND ( 'NONE', #75028, .T. ) ; +#80764 = EDGE_LOOP ( 'NONE', ( #58647, #71736, #5007, #66433 ) ) ; +#80765 = CARTESIAN_POINT ( 'NONE', ( -3.357134060507540200, 10.52620220503734000, -28.70555803803009500 ) ) ; +#80766 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80767 = AXIS2_PLACEMENT_3D ( 'NONE', #18909, #62446, #25173 ) ; +#80768 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 90.80000000000001100, -28.20555803802997700 ) ) ; +#80769 = ADVANCED_FACE ( 'NONE', ( #41150 ), #36938, .F. ) ; +#80770 = ORIENTED_EDGE ( 'NONE', *, *, #42791, .T. ) ; +#80771 = CIRCLE ( 'NONE', #16788, 10.00000000000009200 ) ; +#80772 = EDGE_LOOP ( 'NONE', ( #27747, #15900, #21606, #51138 ) ) ; +#80773 = CARTESIAN_POINT ( 'NONE', ( -10.49999999999999100, 38.98922577050341700, -28.37255355648632000 ) ) ; +#80774 = AXIS2_PLACEMENT_3D ( 'NONE', #21093, #27357, #70830 ) ; +#80775 = EDGE_LOOP ( 'NONE', ( #11450, #2375, #71420, #49501 ) ) ; +#80776 = VERTEX_POINT ( 'NONE', #24458 ) ; +#80777 = ORIENTED_EDGE ( 'NONE', *, *, #36897, .F. ) ; +#80778 = ORIENTED_EDGE ( 'NONE', *, *, #46750, .F. ) ; +#80780 = VERTEX_POINT ( 'NONE', #49423 ) ; +#80779 = EDGE_CURVE ( 'NONE', #40985, #63310, #2604, .T. ) ; +#80781 = CARTESIAN_POINT ( 'NONE', ( -14.00000000000000200, 62.97376207875058900, -28.70555803802997700 ) ) ; +#80782 = AXIS2_PLACEMENT_3D ( 'NONE', #33353, #14592, #27117 ) ; +#80783 = AXIS2_PLACEMENT_3D ( 'NONE', #10399, #53895, #16652 ) ; +#80784 = ORIENTED_EDGE ( 'NONE', *, *, #43321, .T. ) ; +#80785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#80786 = ADVANCED_FACE ( 'NONE', ( #57698 ), #74497, .T. ) ; +#80787 = CONICAL_SURFACE ( 'NONE', #73474, 10.00000000000009200, 0.7853981633974447300 ) ; +#80788 = VERTEX_POINT ( 'NONE', #6211 ) ; +#80789 = VERTEX_POINT ( 'NONE', #49691 ) ; +#80790 = CARTESIAN_POINT ( 'NONE', ( 9.955096376567306400, 18.35339758437789800, -28.20555803803009500 ) ) ; +#80791 = VERTEX_POINT ( 'NONE', #12477 ) ; +#80792 = EDGE_LOOP ( 'NONE', ( #14616, #44270, #44281, #48094 ) ) ; +#80793 = ORIENTED_EDGE ( 'NONE', *, *, #64105, .T. ) ; +#80794 = ORIENTED_EDGE ( 'NONE', *, *, #31893, .F. ) ; +#80795 = AXIS2_PLACEMENT_3D ( 'NONE', #57087, #19824, #63356 ) ; +#80796 = CARTESIAN_POINT ( 'NONE', ( -20.99999999999998900, 19.29999999999999000, -28.20555803802994200 ) ) ; +#80797 = FACE_OUTER_BOUND ( 'NONE', #44102, .T. ) ; +#80798 = ADVANCED_FACE ( 'NONE', ( #48927 ), #70327, .F. ) ; +#80799 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930420500E-015, 68.00000000000000000, 3.794441961969998300 ) ) ; +#80800 = ORIENTED_EDGE ( 'NONE', *, *, #11038, .T. ) ; +#80801 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #31762, #38495, #44742, #7513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.262685178479141200E-007, 0.0005050261270277764300 ), + .UNSPECIFIED. ) ; +#80802 = ORIENTED_EDGE ( 'NONE', *, *, #73143, .T. ) ; +#80803 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, 33.00000000000001400, 6.794441961969995200 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Arm.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Arm.STL new file mode 100644 index 0000000..ee4e69b Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Arm.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_1.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_1.STL new file mode 100644 index 0000000..647e5cf Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_1.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_2.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_2.STL new file mode 100644 index 0000000..452fef7 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_2.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_1.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_1.STL new file mode 100644 index 0000000..e72672e Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_1.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_2.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_2.STL new file mode 100644 index 0000000..ed73c56 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_2.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_3.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_3.STL new file mode 100644 index 0000000..d672b4a Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_3.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Adjust.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Adjust.STL new file mode 100644 index 0000000..3eb27fe Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Adjust.STL differ diff --git a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Plate.STL b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Plate.STL new file mode 100644 index 0000000..6919b08 Binary files /dev/null and b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Plate.STL differ