Adding The Holdout Pistol by RollaTroll.

Firearms/Holdout_Pistol-RollaTroll/README.md

@@ -0,0 +1,58 @@
+# The Holdout Pistol
+
+#### Descriptions
+'The Holdout' was designed to be a replacement for the 'Liberator'. It is different (and possibly better) in many ways. First off, it is about half the empty weight of the Liberator. The barrel is a tad shorter and larger than the Liberators, as well as having rifling. It uses the same nail that the Liberator should use (I just used the same dimensions from the Liberator).
+
+#### Bill of Materials
+
+You will need to print:
+
+* 1 X Barrel_Latch
+* 1 X Barrel
+* 1 X Firing_Pin_Tube
+* 10 X Frame_Pins_Cap
+* 3 X Frame_Pin_Long
+* 8 X Frame_Pin_Short
+* 8 X Frame_Pin
+* 1 X Grip_Thickener_Left
+* 1 X Grip_Thickener_Right
+* 1 X Hammer
+* 1 X Main_Spring
+* 1 X Side_Extension_Left
+* 1 X Side_Extension_Right
+* 1 X Side_Left
+* 1 X Side_Right
+* 1 X Trigger
+
+You will need to obtain:
+* 1 X Pen Spring (Not sure what size or brand)
+* 1 X 7-9mm segment of a small paperclip or other wire (1mm diameter)
+* 1 X Nail (Unknown dimensions, same as one used with Liberator)
+
+
+
+#### Assembly Instructions
+
+Look at renders and/or the Solidworks Assembly for more detail and clarification.
+
+I recommend putting the Hammer and Trigger in before anything else. This should require the insertion of two regular Frame Pins. They may need to be sanded down in order to fit into the holes, just test and see. They should sit flush to the outside of whatever side (Left or Right) they are put into. Epoxy or other adequate glue should be used to fix them in place. 2 Frame Pin Caps could now be glued into the cavities around the Pins. The Hammer needs a frame pin to be glued into the apropriate hole. Letting it dry a little would be wise. Once the Trigger and Hammer are placed, makes sure they spin freely, especially the Hammer. If working, you can try to put the pen spring in (it will require bending) so it is sitting against the Trigger and fits in its socket. If it won't work now, wait untill everything else is done. Just try pulling the hammer back and see if it will push the trigger out of the way, then let it fall back into place. If it works, that is good, and you may continue.
+
+I suggest that you glue all neccesary Short Frame Pins into the row of 3 holes, ready for the Grip Thickener. The ends of the Pins should sit flush to the inside face of whatever Side (Left or Right) that you are working on. It would be best to do the same to the other Side before going any further. If the pins end up sitting slightly inside the side, then it is neccesary to sand that down untill flush with the rest of the face.You may then glue the apropriate Grip Thickener into place, so that the protruding studs of the pins fit into the holes in the grip.
+
+At this point, you should have both Sides with Grip thickeners glued into place via the Short Frame Pins. On one Side, you should have 2 Frame Pins glued into place, holding the Trigger and Hammer. If you intend to fire the gun later, it is neccesary to use a nail as a firing pin. I am (as of the moment) unsure as to the exact dimensions of the nail used in the Liberator, but You could look around in you hardware store/workshop to see if you have anything that fits. Once a suitable nail is found, you could glue the Firing Pin Tube in. Make sure you have the Nail sitting in the Firing Pin Tube as you glue it in. This will also aid in holding the two Sides together later.
+
+The 3 Long Frame Pins could now be glued in, along with one of the last Short Frame Pins. It would be easiest to do so using the correct Side Extension (Left or Right). Determine which Side you are using, then find the flat side (not the side with holes). That is its front. The completely rounded corner should be on the bottom. Now, glue the two Long Frame Pins into the top 2 holes, and the last one in the hole near the rounded corner. Make VERY sure they are pressed in ALL the way. A Short Frame Pin should now be glued into the remaining hole in the same way. Let it dry a bit, then glue it into the corresponding 4 holes of whatever Side (Left or Right) you are working on. The front of your Side Extension (Left or Right) should sit flush to whatever Side (Left or Right) you are working on, that is, extending that face.
+
+You should now have a Side (Left or Right) with a Side Extension and corresponding Pins, a Grip Thickener and corresponding Pins, a Trigger and corresponding Pin, a Hammer and corresponding Pin, along with 2 Pin Caps. The other Side (Left or Right) should just have it's Grip Thickener and corresponding Pins. You should now glue a regular Frame Pin into the empty hole in the bottom of the grip. It should be sitting against the Grip thickener on the other side. Now fit the Main Spring onto that Pin, the shorter of the 2 arms fitting into the inlet below the Pen Spring socket. The arm that sticks up towards the hammer should be tapered, and sit so it is pushed away when the Hammer is pulled.
+
+3 Frame Pins should now be glued into the remaining holes. They should be located on the Trigger Guard, above and to the right of the Pen Spring socket, and behind the Hammer. Glue tham all in so they sit flush to the outside of whatever Side (Left or Right) you are working on. You may then glue Frame Pin Caps into the corresponding sockets arouund those Pins.
+
+Now take the Barrel Latch and your Segment of Paperclip. Make sure the piece of the paperclip will fit through the hole in the Barrel Latch. If neccesary, drill a larger hole in the same place as the old one. Now, if neccesary, drill out the hole in both Sides. Put the paperclip segment into the Side you are working on (Left or Right), and fit the Barrel Latch onto that, make sure it turns freely.
+
+You should now be ready to glue the opposite Side together. Make sure the glue you use can be ajusted before it dries (Epoxy). I recomend you put glue on any large flat areas that would come in contact with the other side, especially around where the barrel will sit. Get glue ready on all the Pins/holes, then fit the Side on in one go. Make sure the Paperclip Segment/wire fits into the other side. If you wanted to, you could glue the wire in, but so long as you havn/t drilled further than 2.5mm on either side, and the paperclip segment is 7-9mm long, it shouldn't be neccesary.
+
+Now, once the opposite side is glued down, you may glue on all the remaining Frame Pin Caps. If you like, you could try the firing system now, so long as all the glue is dry. The Barrel is attached by sliding the rail through the track below where the Barrel sits. Lift the Barrel Latch as the Barrel comes into the place, then let it fall into place once more. Try gently pushing the Barrel back off and make sure it doesn't move. This is so that the Barrel doesn't fall off when the gun is angled
+down.
+
+#### DISCLAIMER
+I do not accept responsibility for and injury, death or legal issues that may arise from the manufacture or use of this design. It is illegal to manufacture this design in many places, due to its insufficient amount of steel, so be aware of local laws.

Firearms/Holdout_Pistol-RollaTroll/STEP/Barrel_Latch.step

@@ -0,0 +1,570 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Barrel_Latch.STEP',
+    '2014-02-20T00:25:49',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, -0.5000000000000000000 ) ) ;
+#2 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #131, .NOT_KNOWN. ) ;
+#3 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #222 ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#5 = PLANE ( 'NONE',  #106 ) ;
+#6 = LINE ( 'NONE', #407, #99 ) ;
+#7 = VECTOR ( 'NONE', #374, 1000.000000000000000 ) ;
+#8 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ;
+#9 = LINE ( 'NONE', #382, #165 ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 0.6471389759484339500, 2.500000000000016000, 19.25276251147295500 ) ) ;
+#11 = VERTEX_POINT ( 'NONE', #66 ) ;
+#12 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #2, #321 ) ;
+#13 = FILL_AREA_STYLE_COLOUR ( '', #70 ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000000500, 7.467955228502879100E-016 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ;
+#16 = VECTOR ( 'NONE', #424, 1000.000000000000100 ) ;
+#17 = LINE ( 'NONE', #316, #259 ) ;
+#18 = EDGE_LOOP ( 'NONE', ( #248, #157, #267, #225 ) ) ;
+#19 = FACE_OUTER_BOUND ( 'NONE', #24, .T. ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 6.123233995736764800E-017, 0.5000000000000000000 ) ) ;
+#22 = PLANE ( 'NONE',  #143 ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000100, 2.326899199291482900, 19.33093933771368700 ) ) ;
+#24 = EDGE_LOOP ( 'NONE', ( #411, #46, #270, #49 ) ) ;
+#25 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #353, #134 ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( -3.092643828256515900E-014, 2.500000000000016000, 19.85631590206291000 ) ) ;
+#27 = LINE ( 'NONE', #208, #394 ) ;
+#28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ;
+#30 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ;
+#31 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#32 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #38 ) ) ;
+#33 = EDGE_LOOP ( 'NONE', ( #306, #350, #172, #458, #212 ) ) ;
+#34 = ADVANCED_FACE ( 'NONE', ( #419 ), #317, .T. ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( 0.6352994239097302700, 2.534560618220825100, -0.8572891897747942900 ) ) ;
+#36 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #131 ) ) ;
+#37 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#38 = STYLED_ITEM ( 'NONE', ( #354 ), #334 ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( -1.335626404008642700, 2.461922143365418100, 19.81823804542733600 ) ) ;
+#41 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.073223304703379500, 19.42953920676627200 ) ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.695924903997825900, -1.695924903997804200 ) ) ;
+#44 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -7.343662714968604300E-015, 1.000000000000000000 ) ) ;
+#45 = CLOSED_SHELL ( 'NONE', ( #179, #244, #100, #282, #471, #440, #366, #408, #68, #141, #151, #34, #215 ) ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #455, .F. ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( 1.335626404008416900, 2.461922143363068500, 19.81823804542889500 ) ) ;
+#48 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000100, 2.381854399013992700, 19.24926314972451600 ) ) ;
+#49 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ;
+#50 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 6.123233995736764800E-017, 0.5000000000000000000 ) ) ;
+#51 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.500000000000016000, 19.25276251146963300 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#54 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #144, #412 ) ;
+#55 = VERTEX_POINT ( 'NONE', #118 ) ;
+#56 = VERTEX_POINT ( 'NONE', #457 ) ;
+#57 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #342 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #71, #319, #105 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#58 = EDGE_LOOP ( 'NONE', ( #135, #191, #344, #462 ) ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #51, #300 ) ;
+#60 = PLANE ( 'NONE',  #258 ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ;
+#62 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000100, 2.396726055209370100, 19.20062870424516200 ) ) ;
+#64 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -8.678157951031444400, 8.678157951031444400 ) ) ;
+#65 = VERTEX_POINT ( 'NONE', #175 ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -2.398400000000055200, 12.62332372685190100 ) ) ;
+#67 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#68 = ADVANCED_FACE ( 'NONE', ( #30, #410 ), #232, .T. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209370100, -2.398400000000000100 ) ) ;
+#70 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#71 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #278, .T. ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( -1.909743774423434000, 1.967183719848149900, 19.32349962191104000 ) ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ;
+#76 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #31, #284 ) ;
+#77 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.695924903997824100, -1.695924903997804800 ) ) ;
+#79 = VECTOR ( 'NONE', #401, 1000.000000000000100 ) ;
+#80 = CIRCLE ( 'NONE', #97, 12.84914878398185700 ) ;
+#81 = CARTESIAN_POINT ( 'NONE',  ( 1.909743774423421100, 1.967183719848153200, 19.32349962191104400 ) ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #418, .T. ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -4.856315902063046000, 12.49999999999984400 ) ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000100, 2.286762172047174200, 19.36327212536013700 ) ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.250000000000016000, 19.25276251146963300 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #235, .T. ) ;
+#89 = VECTOR ( 'NONE', #142, 1000.000000000000100 ) ;
+#90 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #422, #192 ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ;
+#92 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#94 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, -0.5000000000000000000 ) ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #176, #441 ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, -2.398400000000000100 ) ) ;
+#99 = VECTOR ( 'NONE', #231, 1000.000000000000100 ) ;
+#100 = ADVANCED_FACE ( 'NONE', ( #19 ), #214, .F. ) ;
+#101 = VECTOR ( 'NONE', #213, 1000.000000000000000 ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #230, .F. ) ;
+#103 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
+#104 = EDGE_LOOP ( 'NONE', ( #423, #286, #161, #260, #250 ) ) ;
+#105 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#106 = AXIS2_PLACEMENT_3D ( 'NONE', #380, #255, #44 ) ;
+#107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( -2.002858596119264400, 2.385134242477432700, 19.74145014454032700 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 1.695924903997825900, -1.695924903997804200 ) ) ;
+#112 = EDGE_CURVE ( 'NONE', #237, #293, #115, .T. ) ;
+#113 = LINE ( 'NONE', #186, #16 ) ;
+#114 = ORIENTED_EDGE ( 'NONE', *, *, #347, .T. ) ;
+#115 = LINE ( 'NONE', #265, #149 ) ;
+#116 = VERTEX_POINT ( 'NONE', #272 ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( 1.937421220429557800, 2.392423609567178500, 19.14672292661440900 ) ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209369700, -0.9951237527862509800 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #12 ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000100, 2.144356978872441500, 19.40418643318808700 ) ) ;
+#122 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#123 = EDGE_LOOP ( 'NONE', ( #420, #150 ) ) ;
+#124 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#125 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 7.343662714968602700E-015, -1.000000000000000000 ) ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#128 = LINE ( 'NONE', #288, #224 ) ;
+#129 = VERTEX_POINT ( 'NONE', #21 ) ;
+#130 = FACE_OUTER_BOUND ( 'NONE', #164, .T. ) ;
+#131 = PRODUCT ( 'Barrel_Latch', 'Barrel_Latch', '', ( #375 ) ) ;
+#132 = SURFACE_SIDE_STYLE ('',( #452 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ;
+#136 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#137 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
+#140 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#141 = ADVANCED_FACE ( 'NONE', ( #226, #130 ), #60, .F. ) ;
+#142 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865474600, -0.7071067811865474600 ) ) ;
+#143 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #402, #168 ) ;
+#144 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#145 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #183 ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
+#147 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #119, #388 ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( -1.937421220429570900, 2.392423609567174900, 19.14672292661440500 ) ) ;
+#149 = VECTOR ( 'NONE', #236, 1000.000000000000000 ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #323, .F. ) ;
+#151 = ADVANCED_FACE ( 'NONE', ( #292 ), #373, .F. ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.500000000000016000, 19.25276251146963300 ) ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, -0.5000000000000000000 ) ) ;
+#154 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #355 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #166, #432, #202 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.695924903997824100, -1.695924903997804800 ) ) ;
+#157 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
+#158 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000100, 2.003554981168197600, 19.35987088323108600 ) ) ;
+#159 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865475700, -0.7071067811865475700 ) ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -4.856315902063046000, 12.49999999999984400 ) ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
+#162 = VERTEX_POINT ( 'NONE', #404 ) ;
+#163 = CIRCLE ( 'NONE', #25, 0.5000000000000000000 ) ;
+#164 = EDGE_LOOP ( 'NONE', ( #75, #114, #155, #477, #438, #371, #200, #329 ) ) ;
+#165 = VECTOR ( 'NONE', #109, 1000.000000000000000 ) ;
+#166 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#167 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000001000, 2.003555021583809800, 19.35987092364671000 ) ) ;
+#168 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865474600, 0.7071067811865474600 ) ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.500000000000016000, 19.25276251146963300 ) ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( -1.294259548521051700, 2.464068315290481000, 19.21734413654351300 ) ) ;
+#171 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #320, #107 ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #426, .T. ) ;
+#173 = AXIS2_PLACEMENT_3D ( 'NONE', #470, #243, #28 ) ;
+#174 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.073223304703379500, 19.42953920676627200 ) ) ;
+#176 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#177 = FILL_AREA_STYLE ('',( #13 ) ) ;
+#178 = LINE ( 'NONE', #364, #79 ) ;
+#179 = ADVANCED_FACE ( 'NONE', ( #463 ), #381, .T. ) ;
+#180 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #430 ) ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
+#182 = VECTOR ( 'NONE', #4, 1000.000000000000000 ) ;
+#183 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#184 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#185 = EDGE_LOOP ( 'NONE', ( #91, #445 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -8.678157951031444400, 8.678157951031444400 ) ) ;
+#187 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865435800, 0.7071067811865515700 ) ) ;
+#188 = LINE ( 'NONE', #64, #89 ) ;
+#189 = VERTEX_POINT ( 'NONE', #50 ) ;
+#190 = CYLINDRICAL_SURFACE ( 'NONE', #220, 0.5000000000000000000 ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
+#192 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865435800, -0.7071067811865515700 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.6343600606083712500, 2.500000000000016000, 19.25276251146963000 ) ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000055200, 12.62332372685190100 ) ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.500000000000016000, 19.25276251146963300 ) ) ;
+#196 = AXIS2_PLACEMENT_3D ( 'NONE', #85, #339, #124 ) ;
+#197 = CIRCLE ( 'NONE', #173, 0.5000000000000000000 ) ;
+#198 = VERTEX_POINT ( 'NONE', #86 ) ;
+#199 = LINE ( 'NONE', #299, #92 ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #447, .T. ) ;
+#201 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #430 ), #154 ) ;
+#202 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#203 = EDGE_CURVE ( 'NONE', #11, #474, #199, .T. ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999400, 2.144316532517364800, 19.40418044166256800 ) ) ;
+#205 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 6.123233995736764800E-017, 0.5000000000000000000 ) ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( -0.6694697313851840600, 2.500000000003197400, 19.85631590206512300 ) ) ;
+#207 = VERTEX_POINT ( 'NONE', #326 ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000000500, 7.467955228502879100E-016 ) ) ;
+#209 = VECTOR ( 'NONE', #187, 1000.000000000000000 ) ;
+#210 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #403, #174 ) ;
+#211 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #278, .F. ) ;
+#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#214 = CYLINDRICAL_SURFACE ( 'NONE', #266, 12.84914878398185700 ) ;
+#215 = ADVANCED_FACE ( 'NONE', ( #476 ), #378, .T. ) ;
+#216 = ORIENTED_EDGE ( 'NONE', *, *, #356, .T. ) ;
+#217 = FILL_AREA_STYLE_COLOUR ( '', #184 ) ;
+#218 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#219 = SURFACE_STYLE_USAGE ( .BOTH. , #444 ) ;
+#220 = AXIS2_PLACEMENT_3D ( 'NONE', #327, #77, #110 ) ;
+#221 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#222 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 7.343662714968602700E-015, -1.000000000000000000 ) ) ;
+#224 = VECTOR ( 'NONE', #223, 1000.000000000000000 ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #347, .F. ) ;
+#226 = FACE_BOUND ( 'NONE', #185, .T. ) ;
+#227 = CARTESIAN_POINT ( 'NONE',  ( 0.6694697313853078500, 2.500000000003197400, 19.85631590206512300 ) ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#229 = ORIENTED_EDGE ( 'NONE', *, *, #455, .T. ) ;
+#230 = EDGE_CURVE ( 'NONE', #162, #65, #376, .T. ) ;
+#231 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865474600, -0.7071067811865474600 ) ) ;
+#232 = PLANE ( 'NONE',  #274 ) ;
+#233 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #38 ), #360 ) ;
+#234 = EDGE_LOOP ( 'NONE', ( #409, #309, #88, #314 ) ) ;
+#235 = EDGE_CURVE ( 'NONE', #345, #301, #271, .T. ) ;
+#236 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#237 = VERTEX_POINT ( 'NONE', #43 ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #112, .F. ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000300, 2.286709917746682300, 19.36330334866751100 ) ) ;
+#240 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209369700, -0.9951237527862509800 ) ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( -2.941022287939151200E-014, 2.073223304703378600, 19.42953920676626800 ) ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ;
+#243 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#244 = ADVANCED_FACE ( 'NONE', ( #103 ), #190, .F. ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#246 = AXIS2_PLACEMENT_3D ( 'NONE', #465, #41, #481 ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 1.695924903997824100, -1.695924903997804800 ) ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #426, .F. ) ;
+#249 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #418, .F. ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( -1.267847631248730300, 2.038261300339733400, 19.39457720240262300 ) ) ;
+#252 = CARTESIAN_POINT ( 'NONE',  ( 0.6344058695080432300, 2.073223304703379500, 19.42953920676627200 ) ) ;
+#253 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
+#254 = ORIENTED_EDGE ( 'NONE', *, *, #356, .F. ) ;
+#255 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 7.343662714968604300E-015 ) ) ;
+#256 = AXIS2_PLACEMENT_3D ( 'NONE', #338, #122, #390 ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( 1.275770037704151600, 2.037804939654486200, 19.39412084171737800 ) ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #431, #94, #351 ) ;
+#259 = VECTOR ( 'NONE', #318, 1000.000000000000000 ) ;
+#260 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262813900E-015, 2.500000000000016000, 19.85631590206291000 ) ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( -0.6343600606083673600, 2.500000000000016000, 19.25276251146963000 ) ) ;
+#265 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.695924903997825900, -1.695924903997804200 ) ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #393, #341 ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #372, .F. ) ;
+#268 = EDGE_CURVE ( 'NONE', #207, #469, #9, .T. ) ;
+#269 = VECTOR ( 'NONE', #62, 1000.000000000000000 ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ;
+#271 = LINE ( 'NONE', #1, #182 ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 3.821842048968396200, 3.821842048968396200 ) ) ;
+#274 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #302, #87 ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000300, 2.381873217331840200, 19.24926313516884900 ) ) ;
+#276 = SURFACE_STYLE_FILL_AREA ( #442 ) ;
+#277 = CARTESIAN_POINT ( 'NONE',  ( -2.985431208924157500E-014, 2.500000000000016000, 19.25276251146963300 ) ) ;
+#278 = EDGE_CURVE ( 'NONE', #328, #453, #386, .T. ) ;
+#279 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, -14.99999999999998600, -2.398400000000000100 ) ) ;
+#280 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -4.856315902063046000, 12.49999999999984400 ) ) ;
+#281 = AXIS2_PLACEMENT_3D ( 'NONE', #279, #211, #140 ) ;
+#282 = ADVANCED_FACE ( 'NONE', ( #427 ), #5, .F. ) ;
+#283 = LINE ( 'NONE', #98, #269 ) ;
+#284 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#285 = EDGE_LOOP ( 'NONE', ( #429, #102, #459, #253 ) ) ;
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #372, .T. ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, -0.9951237527862509800 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000000100, -1.761304065558069900E-014 ) ) ;
+#289 = EDGE_CURVE ( 'NONE', #379, #322, #128, .T. ) ;
+#290 = FACE_OUTER_BOUND ( 'NONE', #291, .T. ) ;
+#291 = EDGE_LOOP ( 'NONE', ( #139, #82, #15, #439 ) ) ;
+#292 = FACE_OUTER_BOUND ( 'NONE', #234, .T. ) ;
+#293 = VERTEX_POINT ( 'NONE', #111 ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 1.294259548520354300, 2.464068315290560500, 19.21734413654072400 ) ) ;
+#295 = PLANE ( 'NONE',  #90 ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999400, 2.327005664611107700, 19.33080905932041600 ) ) ;
+#297 = EDGE_CURVE ( 'NONE', #237, #361, #304, .T. ) ;
+#298 = PLANE ( 'NONE',  #480 ) ;
+#299 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -2.398400000000000100, -1.761304065558069900E-014 ) ) ;
+#300 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#301 = VERTEX_POINT ( 'NONE', #153 ) ;
+#302 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#303 = EDGE_CURVE ( 'NONE', #322, #237, #397, .T. ) ;
+#304 = LINE ( 'NONE', #78, #209 ) ;
+#305 = EDGE_CURVE ( 'NONE', #116, #453, #113, .T. ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #330, .F. ) ;
+#307 = EDGE_LOOP ( 'NONE', ( #61, #138, #396, #216, #242, #385, #146, #8 ) ) ;
+#308 = EDGE_CURVE ( 'NONE', #345, #129, #416, .T. ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#311 = EDGE_LOOP ( 'NONE', ( #449, #417, #29, #229 ) ) ;
+#312 = EDGE_CURVE ( 'NONE', #362, #198, #369, .T. ) ;
+#313 = VECTOR ( 'NONE', #448, 1000.000000000000000 ) ;
+#314 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ;
+#315 = EDGE_CURVE ( 'NONE', #379, #207, #405, .T. ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000055200, 12.62332372685190100 ) ) ;
+#317 = CYLINDRICAL_SURFACE ( 'NONE', #281, 17.50000000000000000 ) ;
+#318 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#319 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#320 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#321 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #222, 'design' ) ;
+#322 = VERTEX_POINT ( 'NONE', #14 ) ;
+#323 = EDGE_CURVE ( 'NONE', #189, #301, #197, .T. ) ;
+#324 = LINE ( 'NONE', #247, #7 ) ;
+#325 = EDGE_CURVE ( 'NONE', #322, #474, #27, .T. ) ;
+#326 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -4.420963031171996100, 12.06464712910879000 ) ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#328 = VERTEX_POINT ( 'NONE', #280 ) ;
+#329 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ;
+#330 = EDGE_CURVE ( 'NONE', #162, #328, #188, .T. ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( 2.002858596119251500, 2.385134242477436200, 19.74145014454033000 ) ) ;
+#332 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #478, 'distance_accuracy_value', 'NONE');
+#333 = EDGE_CURVE ( 'NONE', #453, #469, #6, .T. ) ;
+#334 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Latch', ( #383, #171 ), #57 ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ;
+#337 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000300, 2.195874540939430500, 19.39977707534400900 ) ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#339 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#340 = CARTESIAN_POINT ( 'NONE',  ( 1.267783531727445500, 2.465541434584166000, 19.21879621127400700 ) ) ;
+#341 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#342 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #71, 'distance_accuracy_value', 'NONE');
+#343 = EDGE_CURVE ( 'NONE', #198, #361, #283, .T. ) ;
+#344 = ORIENTED_EDGE ( 'NONE', *, *, #323, .T. ) ;
+#345 = VERTEX_POINT ( 'NONE', #95 ) ;
+#346 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #228, #454, #48, #296, #84, #337, #121, #389, #158, #218 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 0.0001468952207331836800, 0.0002937904414663673600, 0.0004406856621995510700, 0.0005875808829327347200 ),
+ .UNSPECIFIED. ) ;
+#347 = EDGE_CURVE ( 'NONE', #116, #56, #363, .T. ) ;
+#348 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #413, #479, #251, #39 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 0.0000000000000000000, 0.1102755425992019800 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9989868654398232900, 0.9989868654398232900, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#349 = PRESENTATION_STYLE_ASSIGNMENT (( #400 ) ) ;
+#350 = ORIENTED_EDGE ( 'NONE', *, *, #230, .T. ) ;
+#351 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#352 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #240, #467, #35, #287 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 6.174491408700058400, 6.391879205659114000 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9960657544841657900, 0.9960657544841657900, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#353 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#354 = PRESENTATION_STYLE_ASSIGNMENT (( #219 ) ) ;
+#355 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #166, 'distance_accuracy_value', 'NONE');
+#356 = EDGE_CURVE ( 'NONE', #328, #207, #178, .T. ) ;
+#357 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 2.396726055209370100, -0.9951237527862509800 ) ) ;
+#358 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #261, #456, #264, #52 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 6.174491408700058400, 6.283185307179586200 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9990157120038969400, 0.9990157120038969400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#359 = SHAPE_DEFINITION_REPRESENTATION ( #120, #334 ) ;
+#360 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #332 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #478, #249, #37 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#361 = VERTEX_POINT ( 'NONE', #357 ) ;
+#362 = VERTEX_POINT ( 'NONE', #169 ) ;
+#363 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #133, #167, #433, #204, #466, #239, #23, #275, #63, #310 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 4 ),
+ ( 1.301042606982605500E-018, 0.0001468614313496729400, 0.0002937228626993445800, 0.0004405842940490162000, 0.0005874457253986878700 ),
+ .UNSPECIFIED. ) ;
+#364 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 3.821842048968396200, 3.821842048968396200 ) ) ;
+#365 = EDGE_CURVE ( 'NONE', #65, #362, #368, .T. ) ;
+#366 = ADVANCED_FACE ( 'NONE', ( #384 ), #298, .F. ) ;
+#367 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#368 = CIRCLE ( 'NONE', #196, 0.2500000000000002200 ) ;
+#369 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #152, #193, #340, #126 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 0.0000000000000000000, 0.1086938984795280900 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9990157120038969400, 0.9990157120038969400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#370 = FACE_OUTER_BOUND ( 'NONE', #428, .T. ) ;
+#371 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#372 = EDGE_CURVE ( 'NONE', #56, #362, #358, .T. ) ;
+#373 = CYLINDRICAL_SURFACE ( 'NONE', #246, 0.5000000000000000000 ) ;
+#374 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865435800, 0.7071067811865515700 ) ) ;
+#375 = PRODUCT_CONTEXT ( 'NONE', #183, 'mechanical' ) ;
+#376 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #221, #446, #252, #42 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 6.172909764580385400, 6.283185307179586200 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9989868654398234000, 0.9989868654398234000, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#377 = CYLINDRICAL_SURFACE ( 'NONE', #54, 2.398400000000001000 ) ;
+#378 =( BOUNDED_SURFACE ( )  B_SPLINE_SURFACE ( 3, 2, ( 
+ ( #392, #262, #195 ),
+ ( #451, #227, #10 ),
+ ( #257, #47, #294 ),
+ ( #81, #331, #117 ) ),
+ .UNSPECIFIED., .F., .F., .F. ) 
+ B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
+ ( 3, 3 ),
+ ( 0.0000000000000000000, 0.1109371958547964700 ),
+ ( 0.0000000000000000000, 1.000000000000000000 ),
+ .UNSPECIFIED. ) 
+ GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_SURFACE ( (
+ ( 1.000000000000000000, 0.3826834323650885600, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3826824913970326400, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3836344193068912400, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3855126206718981800, 1.000000000000000000) ) ) 
+ REPRESENTATION_ITEM ( '' )  SURFACE ( )  );
+#379 = VERTEX_POINT ( 'NONE', #194 ) ;
+#380 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -2.398400000000000100, -1.761304065558069900E-014 ) ) ;
+#381 =( BOUNDED_SURFACE ( )  B_SPLINE_SURFACE ( 3, 2, ( 
+ ( #74, #108, #148 ),
+ ( #415, #40, #170 ),
+ ( #437, #206, #468 ),
+ ( #241, #26, #277 ) ),
+ .UNSPECIFIED., .F., .F., .F. ) 
+ B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
+ ( 3, 3 ),
+ ( 6.172248111324789100, 6.283185307179586200 ),
+ ( 0.0000000000000000000, 1.000000000000000000 ),
+ .UNSPECIFIED. ) 
+ GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_SURFACE ( (
+ ( 1.000000000000000000, 0.3855126206718981800, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3836344193068912400, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3826824913970326400, 1.000000000000000000),
+ ( 1.000000000000000000, 0.3826834323650885600, 1.000000000000000000) ) ) 
+ REPRESENTATION_ITEM ( '' )  SURFACE ( )  );
+#382 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -4.420963031171996100, 12.06464712910879000 ) ) ;
+#383 = MANIFOLD_SOLID_BREP ( 'Fillet7', #45 ) ;
+#384 = FACE_OUTER_BOUND ( 'NONE', #33, .T. ) ;
+#385 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ;
+#386 = LINE ( 'NONE', #160, #313 ) ;
+#387 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ;
+#388 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#389 = CARTESIAN_POINT ( 'NONE',  ( 1.898400000000000300, 2.048254017260473100, 19.38398858946490200 ) ) ;
+#390 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, -8.678157951031444400, 8.678157951031444400 ) ) ;
+#392 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.073223304703378600, 19.42953920676626800 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#394 = VECTOR ( 'NONE', #67, 1000.000000000000000 ) ;
+#395 = CIRCLE ( 'NONE', #76, 2.398400000000001000 ) ;
+#396 = ORIENTED_EDGE ( 'NONE', *, *, #330, .T. ) ;
+#397 = CIRCLE ( 'NONE', #256, 2.398400000000001000 ) ;
+#398 = EDGE_LOOP ( 'NONE', ( #336, #387, #254, #72 ) ) ;
+#399 = EDGE_CURVE ( 'NONE', #129, #345, #163, .T. ) ;
+#400 = SURFACE_STYLE_USAGE ( .BOTH. , #132 ) ;
+#401 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865474600, -0.7071067811865474600 ) ) ;
+#402 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.7071067811865475700, 0.7071067811865475700 ) ) ;
+#403 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#404 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 1.968443555257179100, 19.32475945732006700 ) ) ;
+#405 = CIRCLE ( 'NONE', #210, 12.84914878398185700 ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 8.673617379884035500E-016 ) ) ;
+#407 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 3.821842048968396200, 3.821842048968396200 ) ) ;
+#408 = ADVANCED_FACE ( 'NONE', ( #460 ), #22, .F. ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
+#410 = FACE_BOUND ( 'NONE', #123, .T. ) ;
+#411 = ORIENTED_EDGE ( 'NONE', *, *, #447, .F. ) ;
+#412 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( 1.231932600262814100E-015, 2.073223304703379500, 19.42953920676627200 ) ) ;
+#414 = EDGE_CURVE ( 'NONE', #129, #189, #473, .T. ) ;
+#415 = CARTESIAN_POINT ( 'NONE',  ( -1.275770037705721700, 2.037804939657478000, 19.39412084172036900 ) ) ;
+#416 = CIRCLE ( 'NONE', #59, 0.5000000000000000000 ) ;
+#417 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ;
+#418 = EDGE_CURVE ( 'NONE', #55, #361, #352, .T. ) ;
+#419 = FACE_OUTER_BOUND ( 'NONE', #104, .T. ) ;
+#420 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ;
+#421 = EDGE_CURVE ( 'NONE', #293, #55, #324, .T. ) ;
+#422 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865515700, 0.7071067811865435800 ) ) ;
+#423 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ;
+#424 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865474600, -0.7071067811865474600 ) ) ;
+#425 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865474600, 0.7071067811865474600 ) ) ;
+#426 = EDGE_CURVE ( 'NONE', #65, #116, #348, .T. ) ;
+#427 = FACE_OUTER_BOUND ( 'NONE', #311, .T. ) ;
+#428 = EDGE_LOOP ( 'NONE', ( #93, #238, #181, #20 ) ) ;
+#429 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
+#430 = STYLED_ITEM ( 'NONE', ( #349 ), #383 ) ;
+#431 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#432 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#433 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000100, 2.048269662221796800, 19.38398936786339300 ) ) ;
+#434 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#435 = EDGE_CURVE ( 'NONE', #301, #189, #436, .T. ) ;
+#436 = CIRCLE ( 'NONE', #147, 0.5000000000000000000 ) ;
+#437 = CARTESIAN_POINT ( 'NONE',  ( -0.6378942000479468400, 2.073223304706698600, 19.42953920676959000 ) ) ;
+#438 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#439 = ORIENTED_EDGE ( 'NONE', *, *, #112, .T. ) ;
+#440 = ADVANCED_FACE ( 'NONE', ( #290 ), #295, .F. ) ;
+#441 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#442 = FILL_AREA_STYLE ('',( #217 ) ) ;
+#443 = EDGE_CURVE ( 'NONE', #198, #162, #346, .T. ) ;
+#444 = SURFACE_SIDE_STYLE ('',( #276 ) ) ;
+#445 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ;
+#446 = CARTESIAN_POINT ( 'NONE',  ( 1.267847631248723500, 2.038261300339731600, 19.39457720240262300 ) ) ;
+#447 = EDGE_CURVE ( 'NONE', #11, #469, #80, .T. ) ;
+#448 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#449 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#450 = EDGE_CURVE ( 'NONE', #474, #293, #395, .T. ) ;
+#451 = CARTESIAN_POINT ( 'NONE',  ( 0.6378942000490815900, 2.073223304706629300, 19.42953920676952300 ) ) ;
+#452 = SURFACE_STYLE_FILL_AREA ( #177 ) ;
+#453 = VERTEX_POINT ( 'NONE', #83 ) ;
+#454 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999400, 2.396726055209370100, 19.20062764285987500 ) ) ;
+#455 = EDGE_CURVE ( 'NONE', #379, #11, #17, .T. ) ;
+#456 = CARTESIAN_POINT ( 'NONE',  ( -1.267783531727444000, 2.465541434584165500, 19.21879621127400700 ) ) ;
+#457 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 2.396726055209370100, 19.15096390874742500 ) ) ;
+#458 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ;
+#459 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ;
+#460 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ;
+#461 = LINE ( 'NONE', #69, #101 ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #235, .F. ) ;
+#463 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ;
+#464 = EDGE_CURVE ( 'NONE', #56, #55, #461, .T. ) ;
+#465 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#466 = CARTESIAN_POINT ( 'NONE',  ( -1.898400000000000100, 2.195837313778232800, 19.39978178211562800 ) ) ;
+#467 = CARTESIAN_POINT ( 'NONE',  ( -0.6352994239097320400, 2.534560618220825600, -0.8572891897747939600 ) ) ;
+#468 = CARTESIAN_POINT ( 'NONE',  ( -0.6471389759479548900, 2.500000000000014700, 19.25276251147295500 ) ) ;
+#469 = VERTEX_POINT ( 'NONE', #472 ) ;
+#470 = CARTESIAN_POINT ( 'NONE',  ( 1.898399999999999900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#471 = ADVANCED_FACE ( 'NONE', ( #370 ), #377, .T. ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -4.420963031171996100, 12.06464712910879000 ) ) ;
+#473 = LINE ( 'NONE', #205, #137 ) ;
+#474 = VERTEX_POINT ( 'NONE', #475 ) ;
+#475 = CARTESIAN_POINT ( 'NONE',  ( -1.898399999999999900, -2.398400000000000500, 7.467955228502879100E-016 ) ) ;
+#476 = FACE_OUTER_BOUND ( 'NONE', #285, .T. ) ;
+#477 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
+#478 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#479 = CARTESIAN_POINT ( 'NONE',  ( -0.6344058695080476700, 2.073223304703379900, 19.42953920676627200 ) ) ;
+#480 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #159, #425 ) ;
+#481 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Holdout_Pistol-RollaTroll/STEP/Firing_Pin_Tube.step

@@ -0,0 +1,231 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Firing_Pin_Tube.STEP',
+    '2014-02-20T00:26:58',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#2 = EDGE_LOOP ( 'NONE', ( #197, #163, #176, #57 ) ) ;
+#3 = VERTEX_POINT ( 'NONE', #17 ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #160, #60 ) ;
+#6 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ;
+#8 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#9 = VERTEX_POINT ( 'NONE', #168 ) ;
+#10 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#11 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#12 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#13 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #78, .T. ) ;
+#15 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #91, .NOT_KNOWN. ) ;
+#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, 4.286263797015736600E-016, 27.00000000000000000 ) ) ;
+#18 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #136, #71 ) ;
+#19 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
+#21 = VECTOR ( 'NONE', #188, 1000.000000000000000 ) ;
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#23 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #22, #131 ) ;
+#24 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = EDGE_LOOP ( 'NONE', ( #129, #153 ) ) ;
+#26 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #15, #40 ) ;
+#27 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #91 ) ) ;
+#28 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #47 ) ;
+#29 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#30 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Firing_Pin_Tube', ( #83, #93 ), #194 ) ;
+#32 = ORIENTED_EDGE ( 'NONE', *, *, #167, .T. ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#34 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #202, #90, #4 ) ;
+#36 = CYLINDRICAL_SURFACE ( 'NONE', #204, 3.500000000000000000 ) ;
+#37 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#38 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #182 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #12, #87, #1 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#39 = VERTEX_POINT ( 'NONE', #89 ) ;
+#40 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #29, 'design' ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
+#42 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #55 ), #38 ) ;
+#43 = ADVANCED_FACE ( 'NONE', ( #114, #53 ), #108, .F. ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 1.750000000000000000, 2.143131898507868300E-016, 27.00000000000000000 ) ) ;
+#45 = FACE_OUTER_BOUND ( 'NONE', #88, .T. ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
+#47 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #37, #140 ) ;
+#49 = ORIENTED_EDGE ( 'NONE', *, *, #78, .F. ) ;
+#50 = FILL_AREA_STYLE ('',( #196 ) ) ;
+#51 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#52 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #55 ) ) ;
+#53 = FACE_BOUND ( 'NONE', #207, .T. ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#55 = STYLED_ITEM ( 'NONE', ( #201 ), #83 ) ;
+#56 = AXIS2_PLACEMENT_3D ( 'NONE', #67, #116, #205 ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #112, .F. ) ;
+#58 = EDGE_LOOP ( 'NONE', ( #20, #46 ) ) ;
+#59 = SURFACE_STYLE_USAGE ( .BOTH. , #150 ) ;
+#60 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#61 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#62 = SURFACE_SIDE_STYLE ('',( #146 ) ) ;
+#63 = VERTEX_POINT ( 'NONE', #171 ) ;
+#64 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #13, #34 ) ;
+#65 = ADVANCED_FACE ( 'NONE', ( #45, #84 ), #162, .T. ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( -1.750000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#68 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #134, #51 ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ;
+#70 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #172, 'distance_accuracy_value', 'NONE');
+#71 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
+#73 = FACE_OUTER_BOUND ( 'NONE', #82, .T. ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( -3.500000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#75 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#76 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#77 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#78 = EDGE_CURVE ( 'NONE', #3, #80, #209, .T. ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ;
+#80 = VERTEX_POINT ( 'NONE', #74 ) ;
+#81 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #97, #8 ) ;
+#82 = EDGE_LOOP ( 'NONE', ( #49, #32, #132, #124 ) ) ;
+#83 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #203 ) ;
+#84 = FACE_BOUND ( 'NONE', #25, .T. ) ;
+#85 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( -1.750000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 = EDGE_LOOP ( 'NONE', ( #79, #14 ) ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( -3.500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#91 = PRODUCT ( 'Firing_Pin_Tube', 'Firing_Pin_Tube', '', ( #118 ) ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ;
+#93 = AXIS2_PLACEMENT_3D ( 'NONE', #211, #101, #11 ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( -3.500000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#95 = ADVANCED_FACE ( 'NONE', ( #73 ), #178, .T. ) ;
+#96 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #210, 'distance_accuracy_value', 'NONE');
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = EDGE_CURVE ( 'NONE', #80, #39, #107, .T. ) ;
+#99 = VERTEX_POINT ( 'NONE', #66 ) ;
+#100 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#102 = EDGE_CURVE ( 'NONE', #80, #3, #181, .T. ) ;
+#103 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #26 ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ;
+#105 = EDGE_CURVE ( 'NONE', #135, #192, #184, .T. ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#107 = LINE ( 'NONE', #94, #21 ) ;
+#108 = PLANE ( 'NONE',  #48 ) ;
+#109 = VECTOR ( 'NONE', #76, 1000.000000000000000 ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( -1.750000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#111 = EDGE_LOOP ( 'NONE', ( #144, #92, #126, #41 ) ) ;
+#112 = EDGE_CURVE ( 'NONE', #192, #99, #180, .T. ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#114 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
+#115 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#116 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#117 = EDGE_CURVE ( 'NONE', #99, #63, #193, .T. ) ;
+#118 = PRODUCT_CONTEXT ( 'NONE', #47, 'mechanical' ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, 4.286263797015736600E-016, 27.00000000000000000 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#121 = EDGE_CURVE ( 'NONE', #63, #99, #186, .T. ) ;
+#122 = ADVANCED_FACE ( 'NONE', ( #159 ), #36, .T. ) ;
+#123 = CYLINDRICAL_SURFACE ( 'NONE', #198, 1.750000000000000000 ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ;
+#125 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ;
+#127 = EDGE_CURVE ( 'NONE', #39, #9, #130, .T. ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #155, .F. ) ;
+#130 = CIRCLE ( 'NONE', #212, 3.500000000000000000 ) ;
+#131 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#132 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
+#133 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #29 ) ;
+#134 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#135 = VERTEX_POINT ( 'NONE', #142 ) ;
+#136 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#137 = PRESENTATION_STYLE_ASSIGNMENT (( #59 ) ) ;
+#138 = SURFACE_STYLE_FILL_AREA ( #50 ) ;
+#139 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#141 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 1.750000000000000000, 2.143131898507868300E-016, 27.00000000000000000 ) ) ;
+#143 = EDGE_LOOP ( 'NONE', ( #104, #185, #170, #69 ) ) ;
+#144 = ORIENTED_EDGE ( 'NONE', *, *, #167, .F. ) ;
+#145 = FACE_OUTER_BOUND ( 'NONE', #143, .T. ) ;
+#146 = SURFACE_STYLE_FILL_AREA ( #154 ) ;
+#147 = SHAPE_DEFINITION_REPRESENTATION ( #103, #31 ) ;
+#148 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ;
+#149 = LINE ( 'NONE', #119, #152 ) ;
+#150 = SURFACE_SIDE_STYLE ('',( #138 ) ) ;
+#151 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#152 = VECTOR ( 'NONE', #30, 1000.000000000000000 ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ;
+#154 = FILL_AREA_STYLE ('',( #214 ) ) ;
+#155 = EDGE_CURVE ( 'NONE', #192, #135, #157, .T. ) ;
+#156 = CIRCLE ( 'NONE', #199, 3.500000000000000000 ) ;
+#157 = CIRCLE ( 'NONE', #5, 1.750000000000000000 ) ;
+#158 = LINE ( 'NONE', #44, #109 ) ;
+#159 = FACE_OUTER_BOUND ( 'NONE', #111, .T. ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#161 = VECTOR ( 'NONE', #19, 1000.000000000000000 ) ;
+#162 = PLANE ( 'NONE',  #56 ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#165 = EDGE_CURVE ( 'NONE', #135, #63, #158, .T. ) ;
+#166 = ADVANCED_FACE ( 'NONE', ( #148 ), #123, .F. ) ;
+#167 = EDGE_CURVE ( 'NONE', #3, #9, #149, .T. ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, 4.286263797015736600E-016, 0.0000000000000000000 ) ) ;
+#169 = EDGE_CURVE ( 'NONE', #9, #39, #156, .T. ) ;
+#170 = ORIENTED_EDGE ( 'NONE', *, *, #112, .T. ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( 1.750000000000000000, 2.143131898507868300E-016, 0.0000000000000000000 ) ) ;
+#172 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#173 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#175 = SURFACE_STYLE_USAGE ( .BOTH. , #62 ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
+#177 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #70 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #172, #75, #195 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#178 = CYLINDRICAL_SURFACE ( 'NONE', #64, 3.500000000000000000 ) ;
+#179 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #187 ), #177 ) ;
+#180 = LINE ( 'NONE', #110, #161 ) ;
+#181 = CIRCLE ( 'NONE', #23, 3.500000000000000000 ) ;
+#182 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #12, 'distance_accuracy_value', 'NONE');
+#183 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #187 ) ) ;
+#184 = CIRCLE ( 'NONE', #35, 1.750000000000000000 ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ;
+#186 = CIRCLE ( 'NONE', #81, 1.750000000000000000 ) ;
+#187 = STYLED_ITEM ( 'NONE', ( #137 ), #31 ) ;
+#188 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#189 = ADVANCED_FACE ( 'NONE', ( #145 ), #208, .F. ) ;
+#190 = AXIS2_PLACEMENT_3D ( 'NONE', #213, #151, #85 ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#192 = VERTEX_POINT ( 'NONE', #86 ) ;
+#193 = CIRCLE ( 'NONE', #18, 1.750000000000000000 ) ;
+#194 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #96 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #210, #100, #10 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#195 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#196 = FILL_AREA_STYLE_COLOUR ( '', #141 ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #155, .T. ) ;
+#198 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #139, #173 ) ;
+#199 = AXIS2_PLACEMENT_3D ( 'NONE', #61, #174, #77 ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#201 = PRESENTATION_STYLE_ASSIGNMENT (( #175 ) ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#203 = CLOSED_SHELL ( 'NONE', ( #166, #95, #65, #43, #122, #189 ) ) ;
+#204 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #115, #24 ) ;
+#205 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#207 = EDGE_LOOP ( 'NONE', ( #72, #7 ) ) ;
+#208 = CYLINDRICAL_SURFACE ( 'NONE', #190, 1.750000000000000000 ) ;
+#209 = CIRCLE ( 'NONE', #68, 3.500000000000000000 ) ;
+#210 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#212 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #16, #125 ) ;
+#213 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 27.00000000000000000 ) ) ;
+#214 = FILL_AREA_STYLE_COLOUR ( '', #6 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Holdout_Pistol-RollaTroll/STEP/Frame_Pin.step

@@ -0,0 +1,157 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Frame_Pin.STEP',
+    '2014-02-20T01:01:56',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #13, .T. ) ;
+#2 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Frame_Pin', ( #72, #12 ), #9 ) ;
+#3 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #61, #98 ) ;
+#4 = EDGE_LOOP ( 'NONE', ( #131, #39, #15, #54 ) ) ;
+#5 = EDGE_CURVE ( 'NONE', #62, #46, #132, .T. ) ;
+#6 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#9 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #27 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #56, #134, #63 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#10 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#11 = SHAPE_DEFINITION_REPRESENTATION ( #71, #2 ) ;
+#12 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #64, #6 ) ;
+#13 = EDGE_CURVE ( 'NONE', #114, #62, #108, .T. ) ;
+#14 = PRESENTATION_STYLE_ASSIGNMENT (( #70 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #22, #92 ) ;
+#17 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#18 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #26, #75 ) ;
+#19 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#20 = EDGE_CURVE ( 'NONE', #67, #46, #24, .T. ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#23 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#24 = CIRCLE ( 'NONE', #59, 2.500000000000000000 ) ;
+#25 = CLOSED_SHELL ( 'NONE', ( #129, #84, #40, #135 ) ) ;
+#26 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #120, .NOT_KNOWN. ) ;
+#27 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #56, 'distance_accuracy_value', 'NONE');
+#28 = LINE ( 'NONE', #7, #83 ) ;
+#29 = FILL_AREA_STYLE_COLOUR ( '', #53 ) ;
+#30 = EDGE_LOOP ( 'NONE', ( #1, #124 ) ) ;
+#31 = CYLINDRICAL_SURFACE ( 'NONE', #125, 2.500000000000000000 ) ;
+#32 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#33 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#35 = FACE_OUTER_BOUND ( 'NONE', #30, .T. ) ;
+#36 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #120 ) ) ;
+#37 = EDGE_LOOP ( 'NONE', ( #95, #43, #93, #51 ) ) ;
+#38 = SURFACE_SIDE_STYLE ('',( #138 ) ) ;
+#39 = ORIENTED_EDGE ( 'NONE', *, *, #5, .T. ) ;
+#40 = ADVANCED_FACE ( 'NONE', ( #35 ), #109, .T. ) ;
+#41 = PLANE ( 'NONE',  #16 ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000000, 3.061616997868383100E-016, 10.00000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #13, .F. ) ;
+#44 = FACE_OUTER_BOUND ( 'NONE', #104, .T. ) ;
+#45 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#46 = VERTEX_POINT ( 'NONE', #47 ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000000, 3.061616997868383100E-016, -10.00000000000000000 ) ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ;
+#49 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #10, 'distance_accuracy_value', 'NONE');
+#50 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ;
+#52 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #58, #136 ) ;
+#53 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #137, .F. ) ;
+#55 = FACE_OUTER_BOUND ( 'NONE', #4, .T. ) ;
+#56 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#57 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#58 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #19, #96 ) ;
+#60 = FILL_AREA_STYLE ('',( #126 ) ) ;
+#61 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#62 = VERTEX_POINT ( 'NONE', #42 ) ;
+#63 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000000, 3.061616997868383100E-016, 10.00000000000000000 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#67 = VERTEX_POINT ( 'NONE', #101 ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ;
+#69 = PRESENTATION_STYLE_ASSIGNMENT (( #106 ) ) ;
+#70 = SURFACE_STYLE_USAGE ( .BOTH. , #140 ) ;
+#71 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #18 ) ;
+#72 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #25 ) ;
+#73 = STYLED_ITEM ( 'NONE', ( #14 ), #72 ) ;
+#74 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#75 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #17, 'design' ) ;
+#76 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #88 ) ;
+#77 = PRODUCT_CONTEXT ( 'NONE', #88, 'mechanical' ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ;
+#79 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #118, #33 ) ;
+#80 = CYLINDRICAL_SURFACE ( 'NONE', #3, 2.500000000000000000 ) ;
+#81 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#82 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#83 = VECTOR ( 'NONE', #119, 1000.000000000000000 ) ;
+#84 = ADVANCED_FACE ( 'NONE', ( #111 ), #31, .T. ) ;
+#85 = CIRCLE ( 'NONE', #115, 2.500000000000000000 ) ;
+#86 = SURFACE_STYLE_FILL_AREA ( #60 ) ;
+#87 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #73 ) ) ;
+#88 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#89 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#91 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #17 ) ;
+#92 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ;
+#94 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #73 ), #99 ) ;
+#95 = ORIENTED_EDGE ( 'NONE', *, *, #5, .F. ) ;
+#96 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = FILL_AREA_STYLE ('',( #29 ) ) ;
+#98 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#99 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #49 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #10, #82, #23 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#100 = VECTOR ( 'NONE', #89, 1000.000000000000000 ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ;
+#102 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#103 = STYLED_ITEM ( 'NONE', ( #69 ), #2 ) ;
+#104 = EDGE_LOOP ( 'NONE', ( #121, #48 ) ) ;
+#105 = CIRCLE ( 'NONE', #133, 2.500000000000000000 ) ;
+#106 = SURFACE_STYLE_USAGE ( .BOTH. , #38 ) ;
+#107 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #103 ) ) ;
+#108 = CIRCLE ( 'NONE', #52, 2.500000000000000000 ) ;
+#109 = PLANE ( 'NONE',  #79 ) ;
+#110 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #45, 'distance_accuracy_value', 'NONE');
+#111 = FACE_OUTER_BOUND ( 'NONE', #37, .T. ) ;
+#112 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#114 = VERTEX_POINT ( 'NONE', #127 ) ;
+#115 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #90, #32 ) ;
+#116 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #103 ), #128 ) ;
+#117 = EDGE_CURVE ( 'NONE', #62, #114, #85, .T. ) ;
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#120 = PRODUCT ( 'Frame_Pin', 'Frame_Pin', '', ( #77 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ;
+#122 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#123 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
+#125 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #50, #102 ) ;
+#126 = FILL_AREA_STYLE_COLOUR ( '', #74 ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000000, 0.0000000000000000000, 10.00000000000000000 ) ) ;
+#128 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #110 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #45, #122, #57 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#129 = ADVANCED_FACE ( 'NONE', ( #55 ), #80, .T. ) ;
+#130 = EDGE_CURVE ( 'NONE', #46, #67, #105, .T. ) ;
+#131 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
+#132 = LINE ( 'NONE', #65, #100 ) ;
+#133 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #8, #81 ) ;
+#134 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#135 = ADVANCED_FACE ( 'NONE', ( #44 ), #41, .F. ) ;
+#136 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#137 = EDGE_CURVE ( 'NONE', #114, #67, #28, .T. ) ;
+#138 = SURFACE_STYLE_FILL_AREA ( #97 ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ;
+#140 = SURFACE_SIDE_STYLE ('',( #86 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Holdout_Pistol-RollaTroll/STEP/Frame_Pin_Long.step

@@ -0,0 +1,157 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Frame_Pin_Long.STEP',
+    '2014-02-20T01:31:53',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #20, .NOT_KNOWN. ) ;
+#2 = SURFACE_STYLE_USAGE ( .BOTH. , #60 ) ;
+#3 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#5 = SURFACE_SIDE_STYLE ('',( #113 ) ) ;
+#6 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #20 ) ) ;
+#7 = VECTOR ( 'NONE', #139, 1000.000000000000000 ) ;
+#8 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#9 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#10 = EDGE_LOOP ( 'NONE', ( #128, #125 ) ) ;
+#11 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #45, 'design' ) ;
+#12 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#13 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#14 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #59 ) ;
+#15 = SURFACE_STYLE_FILL_AREA ( #130 ) ;
+#16 = PLANE ( 'NONE',  #63 ) ;
+#17 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#18 = EDGE_CURVE ( 'NONE', #108, #116, #30, .T. ) ;
+#19 = SHAPE_DEFINITION_REPRESENTATION ( #90, #100 ) ;
+#20 = PRODUCT ( 'Frame_Pin_Long', 'Frame_Pin_Long', '', ( #112 ) ) ;
+#21 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#22 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#23 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#24 = ADVANCED_FACE ( 'NONE', ( #91 ), #40, .T. ) ;
+#25 = FACE_OUTER_BOUND ( 'NONE', #49, .T. ) ;
+#26 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#27 = STYLED_ITEM ( 'NONE', ( #48 ), #14 ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -12.50000000000000000 ) ) ;
+#29 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#30 = CIRCLE ( 'NONE', #55, 2.500000000000000400 ) ;
+#31 = CIRCLE ( 'NONE', #107, 2.500000000000000400 ) ;
+#32 = VERTEX_POINT ( 'NONE', #52 ) ;
+#33 = FACE_OUTER_BOUND ( 'NONE', #10, .T. ) ;
+#34 = CIRCLE ( 'NONE', #114, 2.500000000000000400 ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #99, .T. ) ;
+#36 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #27 ) ) ;
+#37 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#38 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000400, 3.061616997868383600E-016, -12.50000000000000000 ) ) ;
+#39 = ADVANCED_FACE ( 'NONE', ( #87 ), #122, .T. ) ;
+#40 = CYLINDRICAL_SURFACE ( 'NONE', #74, 2.500000000000000400 ) ;
+#41 = FILL_AREA_STYLE_COLOUR ( '', #17 ) ;
+#42 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ;
+#44 = PLANE ( 'NONE',  #94 ) ;
+#45 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#46 = EDGE_LOOP ( 'NONE', ( #123, #35, #53, #84 ) ) ;
+#47 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #27 ), #50 ) ;
+#48 = PRESENTATION_STYLE_ASSIGNMENT (( #2 ) ) ;
+#49 = EDGE_LOOP ( 'NONE', ( #78, #102 ) ) ;
+#50 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #98 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #69, #9, #79 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#51 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000400, 3.061616997868383600E-016, 12.50000000000000000 ) ) ;
+#53 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
+#54 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#55 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #61, #3 ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ;
+#57 = LINE ( 'NONE', #96, #58 ) ;
+#58 = VECTOR ( 'NONE', #120, 1000.000000000000000 ) ;
+#59 = CLOSED_SHELL ( 'NONE', ( #39, #24, #129, #75 ) ) ;
+#60 = SURFACE_SIDE_STYLE ('',( #15 ) ) ;
+#61 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#62 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#63 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #26, #110 ) ;
+#64 = FILL_AREA_STYLE ('',( #41 ) ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000400, 0.0000000000000000000, -12.50000000000000000 ) ) ;
+#66 = FILL_AREA_STYLE_COLOUR ( '', #140 ) ;
+#67 = VERTEX_POINT ( 'NONE', #138 ) ;
+#68 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #23, #106 ) ;
+#69 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#70 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#71 = EDGE_CURVE ( 'NONE', #67, #108, #57, .T. ) ;
+#72 = SURFACE_STYLE_USAGE ( .BOTH. , #5 ) ;
+#73 = STYLED_ITEM ( 'NONE', ( #81 ), #100 ) ;
+#74 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #51, #111 ) ;
+#75 = ADVANCED_FACE ( 'NONE', ( #25 ), #44, .F. ) ;
+#76 = EDGE_CURVE ( 'NONE', #116, #108, #82, .T. ) ;
+#77 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#78 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ;
+#79 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#80 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#81 = PRESENTATION_STYLE_ASSIGNMENT (( #72 ) ) ;
+#82 = CIRCLE ( 'NONE', #68, 2.500000000000000400 ) ;
+#83 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #73 ) ) ;
+#84 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ;
+#85 = AXIS2_PLACEMENT_3D ( 'NONE', #70, #80, #42 ) ;
+#86 = EDGE_CURVE ( 'NONE', #32, #67, #31, .T. ) ;
+#87 = FACE_OUTER_BOUND ( 'NONE', #46, .T. ) ;
+#88 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -12.50000000000000000 ) ) ;
+#90 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #134 ) ;
+#91 = FACE_OUTER_BOUND ( 'NONE', #118, .T. ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#93 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #73 ), #104 ) ;
+#94 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #62, #4 ) ;
+#95 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #12, 'distance_accuracy_value', 'NONE');
+#96 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000400, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #69, 'distance_accuracy_value', 'NONE');
+#99 = EDGE_CURVE ( 'NONE', #32, #116, #103, .T. ) ;
+#100 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Frame_Pin_Long', ( #14, #126 ), #127 ) ;
+#101 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #77, 'distance_accuracy_value', 'NONE');
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
+#103 = LINE ( 'NONE', #115, #7 ) ;
+#104 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #95 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #12, #88, #21 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#105 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#106 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#107 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #54, #137 ) ;
+#108 = VERTEX_POINT ( 'NONE', #65 ) ;
+#109 = EDGE_CURVE ( 'NONE', #67, #32, #34, .T. ) ;
+#110 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#111 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#112 = PRODUCT_CONTEXT ( 'NONE', #136, 'mechanical' ) ;
+#113 = SURFACE_STYLE_FILL_AREA ( #64 ) ;
+#114 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #37, #8 ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000000400, 3.061616997868383600E-016, 12.50000000000000000 ) ) ;
+#116 = VERTEX_POINT ( 'NONE', #38 ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#118 = EDGE_LOOP ( 'NONE', ( #131, #43, #56, #135 ) ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#121 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #45 ) ;
+#122 = CYLINDRICAL_SURFACE ( 'NONE', #85, 2.500000000000000400 ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ;
+#124 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #136 ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ;
+#126 = AXIS2_PLACEMENT_3D ( 'NONE', #117, #97, #29 ) ;
+#127 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #101 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #77, #22, #13 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ;
+#129 = ADVANCED_FACE ( 'NONE', ( #33 ), #16, .T. ) ;
+#130 = FILL_AREA_STYLE ('',( #66 ) ) ;
+#131 = ORIENTED_EDGE ( 'NONE', *, *, #99, .F. ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -12.50000000000000000 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#134 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1, #11 ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ;
+#136 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#137 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( -2.500000000000000400, 0.0000000000000000000, 12.50000000000000000 ) ) ;
+#139 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#140 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Holdout_Pistol-RollaTroll/STEP/Frame_Pin_Short.step

@@ -0,0 +1,157 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Frame_Pin_Short.STEP',
+    '2014-02-20T01:53:37',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#2 = EDGE_LOOP ( 'NONE', ( #43, #62, #108, #31 ) ) ;
+#3 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#4 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#5 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#6 = EDGE_LOOP ( 'NONE', ( #117, #88, #75, #91 ) ) ;
+#7 = PRESENTATION_STYLE_ASSIGNMENT (( #46 ) ) ;
+#8 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #65, #137 ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999998700, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#10 = SURFACE_STYLE_FILL_AREA ( #34 ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
+#12 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #1, #80 ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#15 = CYLINDRICAL_SURFACE ( 'NONE', #35, 2.499999999999998700 ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999998700, 0.0000000000000000000, -3.750000000000000000 ) ) ;
+#17 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#18 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #123 ) ;
+#19 = ADVANCED_FACE ( 'NONE', ( #71 ), #55, .T. ) ;
+#20 = CIRCLE ( 'NONE', #29, 2.499999999999998700 ) ;
+#21 = VECTOR ( 'NONE', #96, 1000.000000000000000 ) ;
+#22 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#23 = LINE ( 'NONE', #89, #21 ) ;
+#24 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#26 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#27 = FACE_OUTER_BOUND ( 'NONE', #6, .T. ) ;
+#28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#29 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #92, #22 ) ;
+#30 = VECTOR ( 'NONE', #5, 1000.000000000000000 ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #106, .F. ) ;
+#32 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #45 ) ) ;
+#33 = LINE ( 'NONE', #105, #30 ) ;
+#34 = FILL_AREA_STYLE ('',( #37 ) ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #103, #25 ) ;
+#36 = EDGE_CURVE ( 'NONE', #72, #102, #67, .T. ) ;
+#37 = FILL_AREA_STYLE_COLOUR ( '', #83 ) ;
+#38 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#39 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #45 ), #51 ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
+#41 = EDGE_LOOP ( 'NONE', ( #79, #112 ) ) ;
+#42 = CIRCLE ( 'NONE', #8, 2.499999999999998700 ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
+#44 = FACE_OUTER_BOUND ( 'NONE', #41, .T. ) ;
+#45 = STYLED_ITEM ( 'NONE', ( #7 ), #139 ) ;
+#46 = SURFACE_STYLE_USAGE ( .BOTH. , #109 ) ;
+#47 = CLOSED_SHELL ( 'NONE', ( #19, #110, #122, #73 ) ) ;
+#48 = EDGE_CURVE ( 'NONE', #102, #72, #68, .T. ) ;
+#49 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #138, 'distance_accuracy_value', 'NONE');
+#50 = CARTESIAN_POINT ( 'NONE',  ( 2.499999999999998700, 3.061616997868381700E-016, -3.750000000000000000 ) ) ;
+#51 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #54 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #120, #63, #130 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#52 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#53 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#54 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #120, 'distance_accuracy_value', 'NONE');
+#55 = CYLINDRICAL_SURFACE ( 'NONE', #132, 2.499999999999998700 ) ;
+#56 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Frame_Pin_Short', ( #139, #116 ), #61 ) ;
+#57 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #114, 'distance_accuracy_value', 'NONE');
+#58 = AXIS2_PLACEMENT_3D ( 'NONE', #74, #28, #17 ) ;
+#59 = EDGE_LOOP ( 'NONE', ( #121, #60 ) ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
+#61 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #57 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #114, #52, #124 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#62 = ORIENTED_EDGE ( 'NONE', *, *, #99, .T. ) ;
+#63 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#64 = PLANE ( 'NONE',  #58 ) ;
+#65 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#66 = SURFACE_STYLE_USAGE ( .BOTH. , #84 ) ;
+#67 = CIRCLE ( 'NONE', #126, 2.499999999999998700 ) ;
+#68 = CIRCLE ( 'NONE', #119, 2.499999999999998700 ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
+#70 = FACE_OUTER_BOUND ( 'NONE', #59, .T. ) ;
+#71 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ;
+#72 = VERTEX_POINT ( 'NONE', #9 ) ;
+#73 = ADVANCED_FACE ( 'NONE', ( #44 ), #107, .F. ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #106, .T. ) ;
+#76 = STYLED_ITEM ( 'NONE', ( #134 ), #56 ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 2.499999999999998700, 3.061616997868381700E-016, 3.750000000000000000 ) ) ;
+#78 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ;
+#80 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#81 = VERTEX_POINT ( 'NONE', #16 ) ;
+#82 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #76 ) ) ;
+#83 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#84 = SURFACE_SIDE_STYLE ('',( #135 ) ) ;
+#85 = FILL_AREA_STYLE ('',( #100 ) ) ;
+#86 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #38 ) ;
+#87 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999998700, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#90 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #76 ), #94 ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#93 = EDGE_CURVE ( 'NONE', #81, #111, #42, .T. ) ;
+#94 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #49 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #138, #78, #4 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#96 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#99 = EDGE_CURVE ( 'NONE', #102, #111, #33, .T. ) ;
+#100 = FILL_AREA_STYLE_COLOUR ( '', #136 ) ;
+#101 = PRODUCT ( 'Frame_Pin_Short', 'Frame_Pin_Short', '', ( #104 ) ) ;
+#102 = VERTEX_POINT ( 'NONE', #77 ) ;
+#103 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#104 = PRODUCT_CONTEXT ( 'NONE', #3, 'mechanical' ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( 2.499999999999998700, 3.061616997868381700E-016, 3.750000000000000000 ) ) ;
+#106 = EDGE_CURVE ( 'NONE', #72, #81, #23, .T. ) ;
+#107 = PLANE ( 'NONE',  #12 ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
+#109 = SURFACE_SIDE_STYLE ('',( #10 ) ) ;
+#110 = ADVANCED_FACE ( 'NONE', ( #27 ), #15, .T. ) ;
+#111 = VERTEX_POINT ( 'NONE', #50 ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
+#113 = EDGE_CURVE ( 'NONE', #111, #81, #20, .T. ) ;
+#114 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#115 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ;
+#116 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #97, #26 ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #99, .F. ) ;
+#118 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#119 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #53, #125 ) ;
+#120 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ;
+#122 = ADVANCED_FACE ( 'NONE', ( #70 ), #64, .T. ) ;
+#123 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #129, #128 ) ;
+#124 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#125 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #95, #24 ) ;
+#127 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#128 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #38, 'design' ) ;
+#129 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #101, .NOT_KNOWN. ) ;
+#130 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#131 = SHAPE_DEFINITION_REPRESENTATION ( #18, #56 ) ;
+#132 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #127, #118 ) ;
+#133 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #3 ) ;
+#134 = PRESENTATION_STYLE_ASSIGNMENT (( #66 ) ) ;
+#135 = SURFACE_STYLE_FILL_AREA ( #85 ) ;
+#136 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#137 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#138 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#139 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #47 ) ;
+#140 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #101 ) ) ;
+ENDSEC;
+END-ISO-10303-21;