Upgrading the AR-15 Single Shot Upper Receiver to verion 2.0 by Proteus.
This commit is contained in:
ma duce
parent
df2f07e162
commit
421aca2741
|
|
@ -0,0 +1,20 @@
|
|||
# Single Shot AR-15 Upper
|
||||
|
||||
#### Author
|
||||
Proteus
|
||||
|
||||
#### Version
|
||||
2.0
|
||||
|
||||
#### Caliber(s)
|
||||
.380 ACP
|
||||
|
||||
#### Description
|
||||
Print two halves of upper. MEK together, make sure the holes line up in a lower. Single shot lower included but will work on any AR-15 lower. Acquire metal FCG (Printed disconnector works). Put FCG into lower, you do not need mag release etc. Give barrel an acetone vapor treatment. Load barrel by inserting round in back, inserting into upper, twist 45 degrees for a lock. Roofing nail into firing pin hole, make sure it lines up with the hammer.
|
||||
|
||||
##### Note
|
||||
Always check legality in your area, this would be considered a HANDGUN. For U.S. residents, you do not need to worry about the UFA with metal lowers. Plastic lowers is also probably not an issue as the FCG is all metal (however, be aware).
|
||||
|
||||
#### Credits
|
||||
|
||||
SS Lower inspired by the DefDist v5.0 Lower.
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 216 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
File diff suppressed because one or more lines are too long
|
|
@ -0,0 +1,824 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP214' ),
|
||||
'1' );
|
||||
FILE_NAME ('sec_1.STEP',
|
||||
'2013-10-23T01:30:39',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = AXIS2_PLACEMENT_3D ( 'NONE', #600, #92, #717 ) ;
|
||||
#2 = PLANE ( 'NONE', #433 ) ;
|
||||
#3 = ORIENTED_EDGE ( 'NONE', *, *, #324, .F. ) ;
|
||||
#4 = VECTOR ( 'NONE', #351, 39.37007874015748100 ) ;
|
||||
#5 = PLANE ( 'NONE', #691 ) ;
|
||||
#6 = EDGE_CURVE ( 'NONE', #708, #673, #761, .T. ) ;
|
||||
#7 = VERTEX_POINT ( 'NONE', #21 ) ;
|
||||
#8 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #83, #511 ) ;
|
||||
#9 = EDGE_LOOP ( 'NONE', ( #288, #647, #193, #275 ) ) ;
|
||||
#10 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#11 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ;
|
||||
#12 = EDGE_CURVE ( 'NONE', #52, #632, #452, .T. ) ;
|
||||
#13 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.3850000000000000600, 0.0000000000000000000 ) ) ;
|
||||
#14 = CYLINDRICAL_SURFACE ( 'NONE', #32, 0.7500000000000004400 ) ;
|
||||
#15 = EDGE_CURVE ( 'NONE', #474, #548, #106, .T. ) ;
|
||||
#16 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.4799999999999999800, -7.011999999999999600 ) ) ;
|
||||
#17 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
|
||||
#18 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
|
||||
#19 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ;
|
||||
#20 = VERTEX_POINT ( 'NONE', #16 ) ;
|
||||
#21 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.4799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#23 = DIRECTION ( 'NONE', ( -0.7071067811865487900, -0.7071067811865462400, 0.0000000000000000000 ) ) ;
|
||||
#24 = CARTESIAN_POINT ( 'NONE', ( 0.09359834161578858800, 1.460000000000000000, -7.112817947282732900 ) ) ;
|
||||
#25 = EDGE_CURVE ( 'NONE', #699, #548, #807, .T. ) ;
|
||||
#26 = AXIS2_PLACEMENT_3D ( 'NONE', #446, #327, #575 ) ;
|
||||
#27 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#28 = ADVANCED_FACE ( 'NONE', ( #18 ), #343, .T. ) ;
|
||||
#29 = CIRCLE ( 'NONE', #201, 0.7500000000000004400 ) ;
|
||||
#30 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#31 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#32 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #803, #132 ) ;
|
||||
#33 = ADVANCED_FACE ( 'NONE', ( #716 ), #407, .F. ) ;
|
||||
#34 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#36 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ;
|
||||
#37 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#38 = EDGE_CURVE ( 'NONE', #492, #52, #136, .T. ) ;
|
||||
#39 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#40 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#41 = FACE_OUTER_BOUND ( 'NONE', #705, .T. ) ;
|
||||
#42 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999995400, -4.338774769543363200 ) ) ;
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #221, .F. ) ;
|
||||
#44 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000002700, 0.0000000000000000000, -9.161685344605758500E-017 ) ) ;
|
||||
#45 = ORIENTED_EDGE ( 'NONE', *, *, #67, .F. ) ;
|
||||
#46 = DIRECTION ( 'NONE', ( 0.7071067811865462400, -0.7071067811865487900, -0.0000000000000000000 ) ) ;
|
||||
#47 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.074999999999999700, -5.672139458933667600 ) ) ;
|
||||
#48 = PLANE ( 'NONE', #535 ) ;
|
||||
#49 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #39, #487 ) ;
|
||||
#50 = LINE ( 'NONE', #721, #714 ) ;
|
||||
#51 = LINE ( 'NONE', #188, #557 ) ;
|
||||
#52 = VERTEX_POINT ( 'NONE', #782 ) ;
|
||||
#53 = ORIENTED_EDGE ( 'NONE', *, *, #211, .F. ) ;
|
||||
#54 = EDGE_CURVE ( 'NONE', #568, #126, #402, .T. ) ;
|
||||
#55 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #561 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #332, #775, #283 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#57 = CARTESIAN_POINT ( 'NONE', ( 0.7624127289459190500, 0.4799999999999999800, -6.735774483869296800 ) ) ;
|
||||
#58 = VECTOR ( 'NONE', #307, 39.37007874015748100 ) ;
|
||||
#59 = VECTOR ( 'NONE', #618, 39.37007874015748100 ) ;
|
||||
#60 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#61 = LINE ( 'NONE', #567, #611 ) ;
|
||||
#62 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ;
|
||||
#63 = EDGE_CURVE ( 'NONE', #126, #443, #436, .T. ) ;
|
||||
#64 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#65 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#66 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
|
||||
#67 = EDGE_CURVE ( 'NONE', #699, #490, #248, .T. ) ;
|
||||
#68 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#70 = ORIENTED_EDGE ( 'NONE', *, *, #748, .T. ) ;
|
||||
#71 = VECTOR ( 'NONE', #658, 39.37007874015748100 ) ;
|
||||
#72 = ORIENTED_EDGE ( 'NONE', *, *, #758, .F. ) ;
|
||||
#73 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#74 = EDGE_CURVE ( 'NONE', #398, #100, #570, .T. ) ;
|
||||
#75 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
|
||||
#76 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999995400, 0.0000000000000000000 ) ) ;
|
||||
#77 = PLANE ( 'NONE', #345 ) ;
|
||||
#78 = CARTESIAN_POINT ( 'NONE', ( 1.159999999999999500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#79 = LINE ( 'NONE', #267, #212 ) ;
|
||||
#80 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.9799999999999999800, -7.011999999999999600 ) ) ;
|
||||
#81 = LINE ( 'NONE', #531, #285 ) ;
|
||||
#82 = EDGE_CURVE ( 'NONE', #731, #449, #51, .T. ) ;
|
||||
#83 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#84 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ;
|
||||
#85 = DIRECTION ( 'NONE', ( 0.7071067811865462400, -0.7071067811865487900, 0.0000000000000000000 ) ) ;
|
||||
#86 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.460000000000000000, -5.892139458933668200 ) ) ;
|
||||
#87 = PRESENTATION_STYLE_ASSIGNMENT (( #298 ) ) ;
|
||||
#88 = VERTEX_POINT ( 'NONE', #194 ) ;
|
||||
#89 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#90 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #181, #249 ) ;
|
||||
#91 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #89 );
|
||||
#92 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#93 = FACE_OUTER_BOUND ( 'NONE', #572, .T. ) ;
|
||||
#94 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.159999999999999500, 0.0000000000000000000 ) ) ;
|
||||
#95 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #560, #202 ) ;
|
||||
#96 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.4799999999999999800, -6.876999999999999800 ) ) ;
|
||||
#97 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
|
||||
#98 = VECTOR ( 'NONE', #790, 39.37007874015748100 ) ;
|
||||
#99 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
|
||||
#100 = VERTEX_POINT ( 'NONE', #313 ) ;
|
||||
#101 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.074999999999999700, -5.672139458933667600 ) ) ;
|
||||
#102 = ADVANCED_FACE ( 'NONE', ( #601 ), #183, .F. ) ;
|
||||
#103 = ORIENTED_EDGE ( 'NONE', *, *, #737, .F. ) ;
|
||||
#104 = AXIS2_PLACEMENT_3D ( 'NONE', #636, #10, #504 ) ;
|
||||
#105 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.074999999999999700, -4.338774769543363200 ) ) ;
|
||||
#106 = LINE ( 'NONE', #526, #805 ) ;
|
||||
#107 = ADVANCED_FACE ( 'NONE', ( #754 ), #498, .T. ) ;
|
||||
#108 = FILL_AREA_STYLE ('',( #166 ) ) ;
|
||||
#109 = CARTESIAN_POINT ( 'NONE', ( 0.01150259868820851900, 1.460000000000000000, -6.880849487028914500 ) ) ;
|
||||
#110 = ORIENTED_EDGE ( 'NONE', *, *, #157, .T. ) ;
|
||||
#111 = AXIS2_PLACEMENT_3D ( 'NONE', #680, #254, #491 ) ;
|
||||
#112 = CYLINDRICAL_SURFACE ( 'NONE', #551, 0.8364997641620735000 ) ;
|
||||
#113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#114 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#115 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #747 ) ) ;
|
||||
#116 = ADVANCED_FACE ( 'NONE', ( #464, #277 ), #196, .T. ) ;
|
||||
#117 = EDGE_LOOP ( 'NONE', ( #749, #3 ) ) ;
|
||||
#118 = VERTEX_POINT ( 'NONE', #378 ) ;
|
||||
#119 = EDGE_CURVE ( 'NONE', #569, #490, #367, .T. ) ;
|
||||
#120 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ;
|
||||
#121 = ADVANCED_FACE ( 'NONE', ( #499 ), #112, .T. ) ;
|
||||
#122 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
|
||||
#123 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #276, #757 ) ;
|
||||
#124 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
|
||||
#125 = FACE_OUTER_BOUND ( 'NONE', #333, .T. ) ;
|
||||
#126 = VERTEX_POINT ( 'NONE', #629 ) ;
|
||||
#127 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 1.460000000000000000, -6.750000000000000000 ) ) ;
|
||||
#128 = VECTOR ( 'NONE', #724, 39.37007874015748100 ) ;
|
||||
#129 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ;
|
||||
#130 = VERTEX_POINT ( 'NONE', #742 ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#133 = VECTOR ( 'NONE', #305, 39.37007874015748100 ) ;
|
||||
#134 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#135 = CIRCLE ( 'NONE', #329, 0.2199999999999992800 ) ;
|
||||
#136 = LINE ( 'NONE', #532, #707 ) ;
|
||||
#137 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ;
|
||||
#138 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#139 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #269 ) ) ;
|
||||
#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#143 = EDGE_CURVE ( 'NONE', #608, #479, #696, .T. ) ;
|
||||
#144 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.3850000000000000600, -4.338774769543363200 ) ) ;
|
||||
#145 = PRESENTATION_STYLE_ASSIGNMENT (( #392 ) ) ;
|
||||
#146 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#148 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ;
|
||||
#149 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
|
||||
#150 = PLANE ( 'NONE', #187 ) ;
|
||||
#151 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #543 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #603, #354, #592 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#152 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.4799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.4799999999999999800, 0.0000000000000000000 ) ) ;
|
||||
#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#155 = LINE ( 'NONE', #304, #294 ) ;
|
||||
#156 = LINE ( 'NONE', #177, #497 ) ;
|
||||
#157 = EDGE_CURVE ( 'NONE', #608, #118, #614, .T. ) ;
|
||||
#158 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#159 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ;
|
||||
#160 = VECTOR ( 'NONE', #529, 39.37007874015748100 ) ;
|
||||
#161 = ORIENTED_EDGE ( 'NONE', *, *, #619, .T. ) ;
|
||||
#162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#163 = EDGE_CURVE ( 'NONE', #88, #659, #583, .T. ) ;
|
||||
#164 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#165 = ADVANCED_FACE ( 'NONE', ( #374 ), #427, .F. ) ;
|
||||
#166 = FILL_AREA_STYLE_COLOUR ( '', #416 ) ;
|
||||
#167 = VECTOR ( 'NONE', #726, 39.37007874015748100 ) ;
|
||||
#168 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ;
|
||||
#169 = CARTESIAN_POINT ( 'NONE', ( 0.06706515684144592800, 0.4799999999999999800, -7.060000000000000500 ) ) ;
|
||||
#170 = VERTEX_POINT ( 'NONE', #706 ) ;
|
||||
#171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#172 = ADVANCED_FACE ( 'NONE', ( #650 ), #447, .T. ) ;
|
||||
#173 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#174 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.8549999999999998700, -5.892139458933668200 ) ) ;
|
||||
#175 = CARTESIAN_POINT ( 'NONE', ( 0.7624127289459190500, 0.4799999999999999800, -6.735774483869296800 ) ) ;
|
||||
#176 = DIRECTION ( 'NONE', ( 1.665760971746501000E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#177 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.9799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#178 = LINE ( 'NONE', #510, #789 ) ;
|
||||
#179 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#180 = CIRCLE ( 'NONE', #563, 0.1349999999999995100 ) ;
|
||||
#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#182 = FACE_OUTER_BOUND ( 'NONE', #584, .T. ) ;
|
||||
#183 = CYLINDRICAL_SURFACE ( 'NONE', #651, 0.2199999999999992800 ) ;
|
||||
#184 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ;
|
||||
#185 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.4799999999999999800, -7.060000000000000500 ) ) ;
|
||||
#186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#187 = AXIS2_PLACEMENT_3D ( 'NONE', #331, #767, #69 ) ;
|
||||
#188 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#189 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ;
|
||||
#190 = VERTEX_POINT ( 'NONE', #773 ) ;
|
||||
#191 = EDGE_CURVE ( 'NONE', #398, #20, #320, .T. ) ;
|
||||
#192 = EDGE_LOOP ( 'NONE', ( #622, #615, #613, #458 ) ) ;
|
||||
#193 = ORIENTED_EDGE ( 'NONE', *, *, #722, .T. ) ;
|
||||
#194 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.159999999999999500, -4.338774769543363200 ) ) ;
|
||||
#195 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #262, #65 ) ;
|
||||
#196 = PLANE ( 'NONE', #318 ) ;
|
||||
#197 = SURFACE_STYLE_FILL_AREA ( #704 ) ;
|
||||
#198 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ;
|
||||
#199 = ORIENTED_EDGE ( 'NONE', *, *, #6, .T. ) ;
|
||||
#200 = VERTEX_POINT ( 'NONE', #648 ) ;
|
||||
#201 = AXIS2_PLACEMENT_3D ( 'NONE', #280, #520, #652 ) ;
|
||||
#202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#203 = EDGE_CURVE ( 'NONE', #632, #586, #217, .T. ) ;
|
||||
#204 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#205 = FACE_OUTER_BOUND ( 'NONE', #770, .T. ) ;
|
||||
#206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#207 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -6.650000000000000400 ) ) ;
|
||||
#208 = LINE ( 'NONE', #224, #488 ) ;
|
||||
#209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#210 = EDGE_CURVE ( 'NONE', #350, #466, #382, .T. ) ;
|
||||
#211 = EDGE_CURVE ( 'NONE', #744, #449, #208, .T. ) ;
|
||||
#212 = VECTOR ( 'NONE', #690, 39.37007874015748100 ) ;
|
||||
#213 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ;
|
||||
#214 = CYLINDRICAL_SURFACE ( 'NONE', #1, 0.1349999999999995100 ) ;
|
||||
#215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#216 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#217 = LINE ( 'NONE', #24, #394 ) ;
|
||||
#218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#219 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 0.0000000000000000000, -6.750000000000000000 ) ) ;
|
||||
#220 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.8549999999999998700, -5.892139458933668200 ) ) ;
|
||||
#221 = EDGE_CURVE ( 'NONE', #170, #88, #743, .T. ) ;
|
||||
#222 = ORIENTED_EDGE ( 'NONE', *, *, #430, .F. ) ;
|
||||
#223 = VERTEX_POINT ( 'NONE', #361 ) ;
|
||||
#224 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#225 = LINE ( 'NONE', #412, #544 ) ;
|
||||
#226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#227 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#228 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#229 = PLANE ( 'NONE', #455 ) ;
|
||||
#230 = ADVANCED_FACE ( 'NONE', ( #766 ), #300, .F. ) ;
|
||||
#231 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ;
|
||||
#232 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.3850000000000004000, -5.672139458933667600 ) ) ;
|
||||
#233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#234 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
|
||||
#235 = LINE ( 'NONE', #480, #494 ) ;
|
||||
#236 = VERTEX_POINT ( 'NONE', #468 ) ;
|
||||
#237 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.3850000000000000600, -0.0000000000000000000 ) ) ;
|
||||
#238 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#239 = EDGE_LOOP ( 'NONE', ( #454, #530, #346, #556 ) ) ;
|
||||
#240 = SURFACE_SIDE_STYLE ('',( #339 ) ) ;
|
||||
#241 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#242 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 1.075000000000000000, -4.338774769543363200 ) ) ;
|
||||
#243 = CIRCLE ( 'NONE', #741, 0.7500000000000004400 ) ;
|
||||
#244 = ORIENTED_EDGE ( 'NONE', *, *, #786, .T. ) ;
|
||||
#245 = EDGE_CURVE ( 'NONE', #190, #350, #225, .T. ) ;
|
||||
#246 = ORIENTED_EDGE ( 'NONE', *, *, #619, .F. ) ;
|
||||
#247 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#248 = LINE ( 'NONE', #589, #528 ) ;
|
||||
#249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#250 = AXIS2_PLACEMENT_3D ( 'NONE', #602, #417, #233 ) ;
|
||||
#251 = PLANE ( 'NONE', #738 ) ;
|
||||
#252 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
|
||||
#253 = FACE_OUTER_BOUND ( 'NONE', #800, .T. ) ;
|
||||
#254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#255 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
|
||||
#256 = FACE_OUTER_BOUND ( 'NONE', #342, .T. ) ;
|
||||
#257 = EDGE_CURVE ( 'NONE', #466, #492, #308, .T. ) ;
|
||||
#258 = ORIENTED_EDGE ( 'NONE', *, *, #12, .T. ) ;
|
||||
#259 = VECTOR ( 'NONE', #34, 39.37007874015748100 ) ;
|
||||
#260 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, -0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#261 = VERTEX_POINT ( 'NONE', #101 ) ;
|
||||
#262 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#263 = AXIS2_PLACEMENT_3D ( 'NONE', #688, #147, #325 ) ;
|
||||
#264 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#265 = ORIENTED_EDGE ( 'NONE', *, *, #676, .T. ) ;
|
||||
#266 = VECTOR ( 'NONE', #630, 39.37007874015748100 ) ;
|
||||
#267 = CARTESIAN_POINT ( 'NONE', ( 0.01150259868820851900, 0.9799999999999999800, -6.880849487028914500 ) ) ;
|
||||
#268 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ;
|
||||
#269 = STYLED_ITEM ( 'NONE', ( #87 ), #286 ) ;
|
||||
#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#271 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
|
||||
#272 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 0.4800000000000000900, -6.750000000000000000 ) ) ;
|
||||
#273 = EDGE_CURVE ( 'NONE', #130, #495, #793, .T. ) ;
|
||||
#274 = VECTOR ( 'NONE', #226, 39.37007874015748100 ) ;
|
||||
#275 = ORIENTED_EDGE ( 'NONE', *, *, #591, .F. ) ;
|
||||
#276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#277 = FACE_OUTER_BOUND ( 'NONE', #370, .T. ) ;
|
||||
#278 = AXIS2_PLACEMENT_3D ( 'NONE', #322, #756, #762 ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
|
||||
#280 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 0.9799999999999999800, -6.750000000000000000 ) ) ;
|
||||
#281 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #291, #521 ) ;
|
||||
#282 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ;
|
||||
#283 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#284 = FACE_OUTER_BOUND ( 'NONE', #626, .T. ) ;
|
||||
#285 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ;
|
||||
#286 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude22', #481 ) ;
|
||||
#287 = LINE ( 'NONE', #146, #752 ) ;
|
||||
#288 = ORIENTED_EDGE ( 'NONE', *, *, #157, .F. ) ;
|
||||
#289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#290 = EDGE_CURVE ( 'NONE', #368, #126, #135, .T. ) ;
|
||||
#291 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#292 = ADVANCED_FACE ( 'NONE', ( #182 ), #415, .T. ) ;
|
||||
#293 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.9799999999999999800, -6.876999999999999800 ) ) ;
|
||||
#294 = VECTOR ( 'NONE', #545, 39.37007874015748100 ) ;
|
||||
#295 = AXIS2_PLACEMENT_3D ( 'NONE', #801, #140, #802 ) ;
|
||||
#296 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ;
|
||||
#297 = ORIENTED_EDGE ( 'NONE', *, *, #763, .F. ) ;
|
||||
#298 = SURFACE_STYLE_USAGE ( .BOTH. , #240 ) ;
|
||||
#299 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#300 = PLANE ( 'NONE', #250 ) ;
|
||||
#301 = EDGE_CURVE ( 'NONE', #261, #659, #725, .T. ) ;
|
||||
#302 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #459, 'distance_accuracy_value', 'NONE');
|
||||
#303 = VERTEX_POINT ( 'NONE', #169 ) ;
|
||||
#304 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.3850000000000001200, 0.0000000000000000000 ) ) ;
|
||||
#305 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#307 = DIRECTION ( 'NONE', ( -1.665760971746501000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#308 = LINE ( 'NONE', #114, #259 ) ;
|
||||
#309 = CARTESIAN_POINT ( 'NONE', ( -2.860000000000000800, 0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#310 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #269 ), #151 ) ;
|
||||
#311 = VECTOR ( 'NONE', #502, 39.37007874015748100 ) ;
|
||||
#312 = EDGE_CURVE ( 'NONE', #357, #479, #61, .T. ) ;
|
||||
#313 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.9799999999999999800, -6.742000000000000000 ) ) ;
|
||||
#314 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
|
||||
#315 = LINE ( 'NONE', #472, #609 ) ;
|
||||
#316 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 1.460000000000000000, -6.750000000000000000 ) ) ;
|
||||
#317 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#318 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #64, #573 ) ;
|
||||
#319 = ORIENTED_EDGE ( 'NONE', *, *, #12, .F. ) ;
|
||||
#320 = LINE ( 'NONE', #695, #71 ) ;
|
||||
#321 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #302 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #459, #216, #337 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#322 = CARTESIAN_POINT ( 'NONE', ( 0.8332028222822542900, 1.460000000000000000, -6.724195096765828200 ) ) ;
|
||||
#323 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.4799999999999999800, -6.876999999999999800 ) ) ;
|
||||
#324 = EDGE_CURVE ( 'NONE', #223, #20, #517, .T. ) ;
|
||||
#325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#326 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.4799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#328 = VECTOR ( 'NONE', #241, 39.37007874015748100 ) ;
|
||||
#329 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #655, #606 ) ;
|
||||
#330 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#331 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#332 =( CONVERSION_BASED_UNIT ( 'INCH', #91 ) LENGTH_UNIT ( ) NAMED_UNIT ( #787 ) );
|
||||
#333 = EDGE_LOOP ( 'NONE', ( #640, #381, #685, #222 ) ) ;
|
||||
#334 = CYLINDRICAL_SURFACE ( 'NONE', #90, 0.2199999999999992800 ) ;
|
||||
#335 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.6050000000000000900, -5.672139458933667600 ) ) ;
|
||||
#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#337 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#338 = ORIENTED_EDGE ( 'NONE', *, *, #641, .F. ) ;
|
||||
#339 = SURFACE_STYLE_FILL_AREA ( #108 ) ;
|
||||
#340 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#341 = PRODUCT_CONTEXT ( 'NONE', #582, 'mechanical' ) ;
|
||||
#342 = EDGE_LOOP ( 'NONE', ( #444, #279, #785, #383, #550, #781, #149, #198, #687, #475, #694, #513 ) ) ;
|
||||
#343 = PLANE ( 'NONE', #406 ) ;
|
||||
#344 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#345 = AXIS2_PLACEMENT_3D ( 'NONE', #576, #448, #456 ) ;
|
||||
#346 = ORIENTED_EDGE ( 'NONE', *, *, #324, .T. ) ;
|
||||
#347 = LINE ( 'NONE', #86, #703 ) ;
|
||||
#348 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ;
|
||||
#349 = ADVANCED_FACE ( 'NONE', ( #256 ), #375, .F. ) ;
|
||||
#350 = VERTEX_POINT ( 'NONE', #555 ) ;
|
||||
#351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#352 = EDGE_CURVE ( 'NONE', #261, #699, #362, .T. ) ;
|
||||
#353 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #30, 'design' ) ;
|
||||
#354 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#355 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 0.0000000000000000000, -7.500000000000000000 ) ) ;
|
||||
#356 = COLOUR_RGB ( '',0.8941176470588234600, 0.9098039215686274400, 0.9294117647058823800 ) ;
|
||||
#357 = VERTEX_POINT ( 'NONE', #627 ) ;
|
||||
#358 = ADVANCED_FACE ( 'NONE', ( #581 ), #14, .T. ) ;
|
||||
#359 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#360 = EDGE_LOOP ( 'NONE', ( #70, #234, #616, #385, #682 ) ) ;
|
||||
#361 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.4799999999999999800, -6.742000000000000000 ) ) ;
|
||||
#362 = LINE ( 'NONE', #635, #799 ) ;
|
||||
#363 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
|
||||
#364 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#365 = EDGE_CURVE ( 'NONE', #200, #708, #783, .T. ) ;
|
||||
#366 = FACE_OUTER_BOUND ( 'NONE', #564, .T. ) ;
|
||||
#367 = LINE ( 'NONE', #134, #549 ) ;
|
||||
#368 = VERTEX_POINT ( 'NONE', #631 ) ;
|
||||
#369 = EDGE_CURVE ( 'NONE', #443, #449, #287, .T. ) ;
|
||||
#370 = EDGE_LOOP ( 'NONE', ( #428, #587, #319, #679, #518 ) ) ;
|
||||
#371 = CIRCLE ( 'NONE', #104, 0.8364997641620735000 ) ;
|
||||
#372 = VECTOR ( 'NONE', #23, 39.37007874015748100 ) ;
|
||||
#373 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 1.480000000000000000, -6.876999999999999800 ) ) ;
|
||||
#374 = FACE_OUTER_BOUND ( 'NONE', #239, .T. ) ;
|
||||
#375 = PLANE ( 'NONE', #195 ) ;
|
||||
#376 = CARTESIAN_POINT ( 'NONE', ( 1.159999999999999500, 0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#377 = VECTOR ( 'NONE', #364, 39.37007874015748100 ) ;
|
||||
#378 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -6.650000000000000400 ) ) ;
|
||||
#379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#380 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #483, #662 ) ;
|
||||
#381 = ORIENTED_EDGE ( 'NONE', *, *, #290, .T. ) ;
|
||||
#382 = LINE ( 'NONE', #152, #733 ) ;
|
||||
#383 = ORIENTED_EDGE ( 'NONE', *, *, #245, .T. ) ;
|
||||
#384 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#385 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ;
|
||||
#386 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#387 = EDGE_CURVE ( 'NONE', #118, #569, #400, .T. ) ;
|
||||
#388 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;
|
||||
#389 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#390 = VECTOR ( 'NONE', #299, 39.37007874015748100 ) ;
|
||||
#391 = FACE_BOUND ( 'NONE', #117, .T. ) ;
|
||||
#392 = SURFACE_STYLE_USAGE ( .BOTH. , #519 ) ;
|
||||
#393 = ORIENTED_EDGE ( 'NONE', *, *, #191, .T. ) ;
|
||||
#394 = VECTOR ( 'NONE', #218, 39.37007874015748100 ) ;
|
||||
#395 = ORIENTED_EDGE ( 'NONE', *, *, #301, .T. ) ;
|
||||
#396 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #56, #750 ) ;
|
||||
#397 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#398 = VERTEX_POINT ( 'NONE', #80 ) ;
|
||||
#399 = EDGE_LOOP ( 'NONE', ( #409, #794, #297, #363 ) ) ;
|
||||
#400 = LINE ( 'NONE', #142, #723 ) ;
|
||||
#401 = EDGE_LOOP ( 'NONE', ( #507, #599, #393, #546 ) ) ;
|
||||
#402 = LINE ( 'NONE', #675, #672 ) ;
|
||||
#403 = EDGE_CURVE ( 'NONE', #586, #303, #666, .T. ) ;
|
||||
#404 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6050000000000000900, -5.672139458933667600 ) ) ;
|
||||
#405 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 1.075000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#406 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #154, #462 ) ;
|
||||
#407 = PLANE ( 'NONE', #612 ) ;
|
||||
#408 = ADVANCED_FACE ( 'NONE', ( #253 ), #77, .F. ) ;
|
||||
#409 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ;
|
||||
#410 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#411 = CIRCLE ( 'NONE', #620, 0.7672225435568271700 ) ;
|
||||
#412 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -6.650000000000000400 ) ) ;
|
||||
#413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#414 = ORIENTED_EDGE ( 'NONE', *, *, #788, .F. ) ;
|
||||
#415 = PLANE ( 'NONE', #661 ) ;
|
||||
#416 = COLOUR_RGB ( '',0.8941176470588234600, 0.9098039215686274400, 0.9294117647058823800 ) ;
|
||||
#417 = DIRECTION ( 'NONE', ( -0.7071067811865487900, -0.7071067811865462400, -0.0000000000000000000 ) ) ;
|
||||
#418 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.6050000000000000900, -5.892139458933668200 ) ) ;
|
||||
#419 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#420 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999995400, -7.500000000000000000 ) ) ;
|
||||
#421 = EDGE_LOOP ( 'NONE', ( #701, #669, #780, #296 ) ) ;
|
||||
#422 = ADVANCED_FACE ( 'NONE', ( #566 ), #150, .F. ) ;
|
||||
#423 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#424 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#425 = ADVANCED_FACE ( 'NONE', ( #391, #93 ), #5, .T. ) ;
|
||||
#426 = EDGE_LOOP ( 'NONE', ( #649, #97, #53, #84, #500, #713 ) ) ;
|
||||
#427 = CYLINDRICAL_SURFACE ( 'NONE', #442, 0.1349999999999995100 ) ;
|
||||
#428 = ORIENTED_EDGE ( 'NONE', *, *, #722, .F. ) ;
|
||||
#429 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.6050000000000000900, -5.672139458933667600 ) ) ;
|
||||
#430 = EDGE_CURVE ( 'NONE', #508, #568, #553, .T. ) ;
|
||||
#431 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
|
||||
#432 = LINE ( 'NONE', #633, #804 ) ;
|
||||
#433 = AXIS2_PLACEMENT_3D ( 'NONE', #698, #270, #577 ) ;
|
||||
#434 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
|
||||
#435 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -1.665760971746501000E-016 ) ) ;
|
||||
#436 = LINE ( 'NONE', #237, #98 ) ;
|
||||
#437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#438 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#439 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#440 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
|
||||
#441 = LINE ( 'NONE', #242, #133 ) ;
|
||||
#442 = AXIS2_PLACEMENT_3D ( 'NONE', #373, #264, #451 ) ;
|
||||
#443 = VERTEX_POINT ( 'NONE', #644 ) ;
|
||||
#444 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ;
|
||||
#445 = EDGE_CURVE ( 'NONE', #474, #508, #347, .T. ) ;
|
||||
#446 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.8549999999999998700, -5.672139458933667600 ) ) ;
|
||||
#447 = PLANE ( 'NONE', #637 ) ;
|
||||
#448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#449 = VERTEX_POINT ( 'NONE', #384 ) ;
|
||||
#450 = CIRCLE ( 'NONE', #263, 0.7672225435568271700 ) ;
|
||||
#451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#452 = LINE ( 'NONE', #397, #274 ) ;
|
||||
#453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#454 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ;
|
||||
#455 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #541, #35 ) ;
|
||||
#456 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#457 = EDGE_CURVE ( 'NONE', #632, #515, #29, .T. ) ;
|
||||
#458 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ;
|
||||
#459 =( CONVERSION_BASED_UNIT ( 'INCH', #664 ) LENGTH_UNIT ( ) NAMED_UNIT ( #798 ) );
|
||||
#460 = ORIENTED_EDGE ( 'NONE', *, *, #221, .T. ) ;
|
||||
#461 = LINE ( 'NONE', #185, #58 ) ;
|
||||
#462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#464 = FACE_BOUND ( 'NONE', #665, .T. ) ;
|
||||
#465 = ORIENTED_EDGE ( 'NONE', *, *, #525, .T. ) ;
|
||||
#466 = VERTEX_POINT ( 'NONE', #326 ) ;
|
||||
#467 = EDGE_CURVE ( 'NONE', #236, #673, #243, .T. ) ;
|
||||
#468 = CARTESIAN_POINT ( 'NONE', ( 0.06706515684144592800, 0.0000000000000000000, -7.060000000000000500 ) ) ;
|
||||
#469 = VECTOR ( 'NONE', #389, 39.37007874015748100 ) ;
|
||||
#470 = ORIENTED_EDGE ( 'NONE', *, *, #751, .T. ) ;
|
||||
#471 = ADVANCED_FACE ( 'NONE', ( #547 ), #229, .F. ) ;
|
||||
#472 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#473 = VECTOR ( 'NONE', #453, 39.37007874015748100 ) ;
|
||||
#474 = VERTEX_POINT ( 'NONE', #220 ) ;
|
||||
#475 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
|
||||
#476 = CARTESIAN_POINT ( 'NONE', ( 0.01150259868820851900, 0.9799999999999999800, -6.880849487028914500 ) ) ;
|
||||
#477 = CARTESIAN_POINT ( 'NONE', ( 0.09359834161578858800, 0.9799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#478 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, -0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#479 = VERTEX_POINT ( 'NONE', #728 ) ;
|
||||
#480 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#481 = CLOSED_SHELL ( 'NONE', ( #165, #33, #28, #349, #422, #604, #471, #230, #172, #358, #718, #590, #537, #425, #121, #116, #594, #292, #408, #102, #660, #107, #610, #720 ) ) ;
|
||||
#482 = FACE_OUTER_BOUND ( 'NONE', #401, .T. ) ;
|
||||
#483 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#484 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
|
||||
#485 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #624, #353 ) ;
|
||||
#486 = ORIENTED_EDGE ( 'NONE', *, *, #711, .T. ) ;
|
||||
#487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#488 = VECTOR ( 'NONE', #533, 39.37007874015748100 ) ;
|
||||
#489 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -5.892139458933668200 ) ) ;
|
||||
#490 = VERTEX_POINT ( 'NONE', #105 ) ;
|
||||
#491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#492 = VERTEX_POINT ( 'NONE', #727 ) ;
|
||||
#493 = EDGE_CURVE ( 'NONE', #508, #368, #771, .T. ) ;
|
||||
#494 = VECTOR ( 'NONE', #306, 39.37007874015748100 ) ;
|
||||
#495 = VERTEX_POINT ( 'NONE', #667 ) ;
|
||||
#496 = EDGE_CURVE ( 'NONE', #659, #490, #441, .T. ) ;
|
||||
#497 = VECTOR ( 'NONE', #424, 39.37007874015748100 ) ;
|
||||
#498 = PLANE ( 'NONE', #295 ) ;
|
||||
#499 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
|
||||
#500 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ;
|
||||
#501 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#505 = LINE ( 'NONE', #536, #4 ) ;
|
||||
#506 = EDGE_CURVE ( 'NONE', #303, #236, #50, .T. ) ;
|
||||
#507 = ORIENTED_EDGE ( 'NONE', *, *, #681, .F. ) ;
|
||||
#508 = VERTEX_POINT ( 'NONE', #418 ) ;
|
||||
#509 = EDGE_CURVE ( 'NONE', #548, #368, #692, .T. ) ;
|
||||
#510 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.4799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#513 = ORIENTED_EDGE ( 'NONE', *, *, #67, .T. ) ;
|
||||
#514 = LINE ( 'NONE', #238, #390 ) ;
|
||||
#515 = VERTEX_POINT ( 'NONE', #476 ) ;
|
||||
#516 = STYLED_ITEM ( 'NONE', ( #145 ), #621 ) ;
|
||||
#517 = CIRCLE ( 'NONE', #396, 0.1349999999999995100 ) ;
|
||||
#518 = ORIENTED_EDGE ( 'NONE', *, *, #628, .T. ) ;
|
||||
#519 = SURFACE_SIDE_STYLE ('',( #197 ) ) ;
|
||||
#520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#522 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#523 = VECTOR ( 'NONE', #186, 39.37007874015748100 ) ;
|
||||
#524 = SHAPE_DEFINITION_REPRESENTATION ( #712, #621 ) ;
|
||||
#525 = EDGE_CURVE ( 'NONE', #791, #88, #678, .T. ) ;
|
||||
#526 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.8549999999999998700, -5.892139458933668200 ) ) ;
|
||||
#527 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
|
||||
#528 = VECTOR ( 'NONE', #171, 39.37007874015748100 ) ;
|
||||
#529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#530 = ORIENTED_EDGE ( 'NONE', *, *, #681, .T. ) ;
|
||||
#531 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#532 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -7.060000000000000500 ) ) ;
|
||||
#533 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#534 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
|
||||
#535 = AXIS2_PLACEMENT_3D ( 'NONE', #309, #732, #359 ) ;
|
||||
#536 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -6.650000000000000400 ) ) ;
|
||||
#537 = ADVANCED_FACE ( 'NONE', ( #366 ), #579, .T. ) ;
|
||||
#538 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ;
|
||||
#539 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #516 ), #321 ) ;
|
||||
#540 = LINE ( 'NONE', #42, #372 ) ;
|
||||
#541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#542 = EDGE_CURVE ( 'NONE', #495, #731, #540, .T. ) ;
|
||||
#543 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #603, 'distance_accuracy_value', 'NONE');
|
||||
#544 = VECTOR ( 'NONE', #40, 39.37007874015748100 ) ;
|
||||
#545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#546 = ORIENTED_EDGE ( 'NONE', *, *, #795, .T. ) ;
|
||||
#547 = FACE_OUTER_BOUND ( 'NONE', #192, .T. ) ;
|
||||
#548 = VERTEX_POINT ( 'NONE', #174 ) ;
|
||||
#549 = VECTOR ( 'NONE', #138, 39.37007874015748100 ) ;
|
||||
#550 = ORIENTED_EDGE ( 'NONE', *, *, #758, .T. ) ;
|
||||
#551 = AXIS2_PLACEMENT_3D ( 'NONE', #745, #131, #559 ) ;
|
||||
#552 = EDGE_CURVE ( 'NONE', #100, #398, #180, .T. ) ;
|
||||
#553 = CIRCLE ( 'NONE', #729, 0.2199999999999992800 ) ;
|
||||
#554 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ;
|
||||
#555 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.4799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#556 = ORIENTED_EDGE ( 'NONE', *, *, #191, .F. ) ;
|
||||
#557 = VECTOR ( 'NONE', #617, 39.37007874015748100 ) ;
|
||||
#558 = ORIENTED_EDGE ( 'NONE', *, *, #751, .F. ) ;
|
||||
#559 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#561 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #332, 'distance_accuracy_value', 'NONE');
|
||||
#562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#563 = AXIS2_PLACEMENT_3D ( 'NONE', #293, #27, #778 ) ;
|
||||
#564 = EDGE_LOOP ( 'NONE', ( #184, #72, #486, #36 ) ) ;
|
||||
#565 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
|
||||
#566 = FACE_OUTER_BOUND ( 'NONE', #605, .T. ) ;
|
||||
#567 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#568 = VERTEX_POINT ( 'NONE', #232 ) ;
|
||||
#569 = VERTEX_POINT ( 'NONE', #674 ) ;
|
||||
#570 = CIRCLE ( 'NONE', #111, 0.1349999999999995100 ) ;
|
||||
#571 = AXIS2_PLACEMENT_3D ( 'NONE', #501, #22, #463 ) ;
|
||||
#572 = EDGE_LOOP ( 'NONE', ( #625, #388, #11, #634, #348 ) ) ;
|
||||
#573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#574 = EDGE_CURVE ( 'NONE', #479, #673, #315, .T. ) ;
|
||||
#575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#576 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, -5.892139458933668200 ) ) ;
|
||||
#577 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#578 = LINE ( 'NONE', #420, #167 ) ;
|
||||
#579 = CYLINDRICAL_SURFACE ( 'NONE', #380, 0.7672225435568271700 ) ;
|
||||
#580 = EDGE_LOOP ( 'NONE', ( #148, #465, #43, #246 ) ) ;
|
||||
#581 = FACE_OUTER_BOUND ( 'NONE', #753, .T. ) ;
|
||||
#582 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#583 = LINE ( 'NONE', #260, #266 ) ;
|
||||
#584 = EDGE_LOOP ( 'NONE', ( #122, #470, #554, #440 ) ) ;
|
||||
#585 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
|
||||
#586 = VERTEX_POINT ( 'NONE', #776 ) ;
|
||||
#587 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
|
||||
#588 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #227 );
|
||||
#589 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.075000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#590 = ADVANCED_FACE ( 'NONE', ( #205 ), #593, .F. ) ;
|
||||
#591 = EDGE_CURVE ( 'NONE', #118, #190, #505, .T. ) ;
|
||||
#592 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#593 = PLANE ( 'NONE', #774 ) ;
|
||||
#594 = ADVANCED_FACE ( 'NONE', ( #482 ), #214, .F. ) ;
|
||||
#595 = LINE ( 'NONE', #68, #702 ) ;
|
||||
#596 = VECTOR ( 'NONE', #340, 39.37007874015748100 ) ;
|
||||
#597 = EDGE_CURVE ( 'NONE', #791, #569, #81, .T. ) ;
|
||||
#598 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#599 = ORIENTED_EDGE ( 'NONE', *, *, #552, .T. ) ;
|
||||
#600 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 1.480000000000000000, -6.876999999999999800 ) ) ;
|
||||
#601 = FACE_OUTER_BOUND ( 'NONE', #623, .T. ) ;
|
||||
#602 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#603 =( CONVERSION_BASED_UNIT ( 'INCH', #588 ) LENGTH_UNIT ( ) NAMED_UNIT ( #598 ) );
|
||||
#604 = ADVANCED_FACE ( 'NONE', ( #41 ), #656, .T. ) ;
|
||||
#605 = EDGE_LOOP ( 'NONE', ( #168, #137, #338, #460, #639, #734, #755, #124, #792, #265 ) ) ;
|
||||
#606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#607 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 1.480000000000000000, -6.742000000000000000 ) ) ;
|
||||
#608 = VERTEX_POINT ( 'NONE', #109 ) ;
|
||||
#609 = VECTOR ( 'NONE', #344, 39.37007874015748100 ) ;
|
||||
#610 = ADVANCED_FACE ( 'NONE', ( #683 ), #48, .T. ) ;
|
||||
#611 = VECTOR ( 'NONE', #438, 39.37007874015748100 ) ;
|
||||
#612 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #113, #670 ) ;
|
||||
#613 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ;
|
||||
#614 = CIRCLE ( 'NONE', #278, 0.8364997641620735000 ) ;
|
||||
#615 = ORIENTED_EDGE ( 'NONE', *, *, #676, .F. ) ;
|
||||
#616 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
|
||||
#617 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#618 = DIRECTION ( 'NONE', ( 0.7071067811865462400, -0.7071067811865487900, -0.0000000000000000000 ) ) ;
|
||||
#619 = EDGE_CURVE ( 'NONE', #357, #170, #654, .T. ) ;
|
||||
#620 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #437, #684 ) ;
|
||||
#621 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'sec_1', ( #286, #571 ), #55 ) ;
|
||||
#622 = ORIENTED_EDGE ( 'NONE', *, *, #748, .F. ) ;
|
||||
#623 = EDGE_LOOP ( 'NONE', ( #434, #189, #735, #414 ) ) ;
|
||||
#624 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #747, .NOT_KNOWN. ) ;
|
||||
#625 = ORIENTED_EDGE ( 'NONE', *, *, #711, .F. ) ;
|
||||
#626 = EDGE_LOOP ( 'NONE', ( #739, #806, #765, #797, #231 ) ) ;
|
||||
#627 = CARTESIAN_POINT ( 'NONE', ( 1.160000000000000400, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#628 = EDGE_CURVE ( 'NONE', #492, #190, #156, .T. ) ;
|
||||
#629 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.3850000000000000600, -5.672139458933667600 ) ) ;
|
||||
#630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#631 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6050000000000000900, -5.892139458933666400 ) ) ;
|
||||
#632 = VERTEX_POINT ( 'NONE', #477 ) ;
|
||||
#633 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.4799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#634 = ORIENTED_EDGE ( 'NONE', *, *, #737, .T. ) ;
|
||||
#635 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 1.074999999999999700, -5.672139458933667600 ) ) ;
|
||||
#636 = CARTESIAN_POINT ( 'NONE', ( 0.8332028222822542900, 0.9799999999999999800, -6.724195096765828200 ) ) ;
|
||||
#637 = AXIS2_PLACEMENT_3D ( 'NONE', #76, #85, #215 ) ;
|
||||
#638 = LINE ( 'NONE', #78, #311 ) ;
|
||||
#639 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ;
|
||||
#640 = ORIENTED_EDGE ( 'NONE', *, *, #493, .T. ) ;
|
||||
#641 = EDGE_CURVE ( 'NONE', #170, #200, #514, .T. ) ;
|
||||
#642 = ORIENTED_EDGE ( 'NONE', *, *, #552, .F. ) ;
|
||||
#643 = FILL_AREA_STYLE_COLOUR ( '', #356 ) ;
|
||||
#644 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.3850000000000001200, -4.338774769543363200 ) ) ;
|
||||
#645 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #516 ) ) ;
|
||||
#646 = VECTOR ( 'NONE', #46, 39.37007874015748100 ) ;
|
||||
#647 = ORIENTED_EDGE ( 'NONE', *, *, #786, .F. ) ;
|
||||
#648 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999994300, -7.500000000000000000 ) ) ;
|
||||
#649 = ORIENTED_EDGE ( 'NONE', *, *, #763, .T. ) ;
|
||||
#650 = FACE_OUTER_BOUND ( 'NONE', #399, .T. ) ;
|
||||
#651 = AXIS2_PLACEMENT_3D ( 'NONE', #730, #247, #736 ) ;
|
||||
#652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#653 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #30 ) ;
|
||||
#654 = LINE ( 'NONE', #423, #59 ) ;
|
||||
#655 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#656 = PLANE ( 'NONE', #49 ) ;
|
||||
#657 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
|
||||
#658 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#659 = VERTEX_POINT ( 'NONE', #663 ) ;
|
||||
#660 = ADVANCED_FACE ( 'NONE', ( #125 ), #334, .F. ) ;
|
||||
#661 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #435, #759 ) ;
|
||||
#662 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#663 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.075000000000000000, -4.338774769543363200 ) ) ;
|
||||
#664 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #158 );
|
||||
#665 = EDGE_LOOP ( 'NONE', ( #129, #642 ) ) ;
|
||||
#666 = CIRCLE ( 'NONE', #123, 0.7500000000000004400 ) ;
|
||||
#667 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999995400, -4.338774769543363200 ) ) ;
|
||||
#668 = EDGE_CURVE ( 'NONE', #495, #200, #578, .T. ) ;
|
||||
#669 = ORIENTED_EDGE ( 'NONE', *, *, #628, .F. ) ;
|
||||
#670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#671 = CARTESIAN_POINT ( 'NONE', ( 1.159999999999999500, 0.0000000000000000000, -7.500000000000000000 ) ) ;
|
||||
#672 = VECTOR ( 'NONE', #179, 39.37007874015748100 ) ;
|
||||
#673 = VERTEX_POINT ( 'NONE', #355 ) ;
|
||||
#674 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -4.338774769543363200 ) ) ;
|
||||
#675 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.3850000000000000600, -5.672139458933667600 ) ) ;
|
||||
#676 = EDGE_CURVE ( 'NONE', #568, #130, #155, .T. ) ;
|
||||
#677 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.6050000000000000900, -5.892139458933668200 ) ) ;
|
||||
#678 = LINE ( 'NONE', #37, #646 ) ;
|
||||
#679 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
|
||||
#680 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 0.9799999999999999800, -6.876999999999999800 ) ) ;
|
||||
#681 = EDGE_CURVE ( 'NONE', #100, #223, #796, .T. ) ;
|
||||
#682 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ;
|
||||
#683 = FACE_OUTER_BOUND ( 'NONE', #360, .T. ) ;
|
||||
#684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#685 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ;
|
||||
#686 = DIRECTION ( 'NONE', ( -0.7071067811865487900, -0.7071067811865462400, 0.0000000000000000000 ) ) ;
|
||||
#687 = ORIENTED_EDGE ( 'NONE', *, *, #290, .F. ) ;
|
||||
#688 = CARTESIAN_POINT ( 'NONE', ( 0.7624127289459190500, 0.0000000000000000000, -6.735774483869296800 ) ) ;
|
||||
#689 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.9799999999999999800, 0.0000000000000000000 ) ) ;
|
||||
#690 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#691 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #206, #512 ) ;
|
||||
#692 = LINE ( 'NONE', #489, #523 ) ;
|
||||
#693 = EDGE_LOOP ( 'NONE', ( #258, #99, #103, #558 ) ) ;
|
||||
#694 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ;
|
||||
#695 = CARTESIAN_POINT ( 'NONE', ( -0.2899999999999992000, 1.480000000000000000, -7.011999999999999600 ) ) ;
|
||||
#696 = CIRCLE ( 'NONE', #95, 0.7500000000000004400 ) ;
|
||||
#697 = EDGE_CURVE ( 'NONE', #791, #357, #235, .T. ) ;
|
||||
#698 = CARTESIAN_POINT ( 'NONE', ( -2.860000000000000800, 0.0000000000000000000, -4.338774769543363200 ) ) ;
|
||||
#699 = VERTEX_POINT ( 'NONE', #47 ) ;
|
||||
#700 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.460000000000000000, -6.650000000000000400 ) ) ;
|
||||
#701 = ORIENTED_EDGE ( 'NONE', *, *, #245, .F. ) ;
|
||||
#702 = VECTOR ( 'NONE', #379, 39.37007874015748100 ) ;
|
||||
#703 = VECTOR ( 'NONE', #73, 39.37007874015748100 ) ;
|
||||
#704 = FILL_AREA_STYLE ('',( #643 ) ) ;
|
||||
#705 = EDGE_LOOP ( 'NONE', ( #395, #213, #45, #565 ) ) ;
|
||||
#706 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.159999999999999500, -7.500000000000000000 ) ) ;
|
||||
#707 = VECTOR ( 'NONE', #176, 39.37007874015748100 ) ;
|
||||
#708 = VERTEX_POINT ( 'NONE', #671 ) ;
|
||||
#709 = EDGE_CURVE ( 'NONE', #7, #466, #461, .T. ) ;
|
||||
#710 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #582 ) ;
|
||||
#711 = EDGE_CURVE ( 'NONE', #350, #303, #411, .T. ) ;
|
||||
#712 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #485 ) ;
|
||||
#713 = ORIENTED_EDGE ( 'NONE', *, *, #6, .F. ) ;
|
||||
#714 = VECTOR ( 'NONE', #173, 39.37007874015748100 ) ;
|
||||
#715 = ORIENTED_EDGE ( 'NONE', *, *, #493, .F. ) ;
|
||||
#716 = FACE_OUTER_BOUND ( 'NONE', #777, .T. ) ;
|
||||
#717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#718 = ADVANCED_FACE ( 'NONE', ( #538 ), #251, .T. ) ;
|
||||
#719 = EDGE_CURVE ( 'NONE', #744, #236, #450, .T. ) ;
|
||||
#720 = ADVANCED_FACE ( 'NONE', ( #284 ), #2, .T. ) ;
|
||||
#721 = CARTESIAN_POINT ( 'NONE', ( 0.06706515684144592800, 0.4799999999999999800, -7.060000000000000500 ) ) ;
|
||||
#722 = EDGE_CURVE ( 'NONE', #515, #190, #371, .T. ) ;
|
||||
#723 = VECTOR ( 'NONE', #386, 39.37007874015748100 ) ;
|
||||
#724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#725 = LINE ( 'NONE', #764, #473 ) ;
|
||||
#726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#727 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#728 = CARTESIAN_POINT ( 'NONE', ( 0.7500000000000008900, 1.460000000000000000, -7.500000000000000000 ) ) ;
|
||||
#729 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #769, #503 ) ;
|
||||
#730 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.8549999999999998700, -5.672139458933667600 ) ) ;
|
||||
#731 = VERTEX_POINT ( 'NONE', #376 ) ;
|
||||
#732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#733 = VECTOR ( 'NONE', #522, 39.37007874015748100 ) ;
|
||||
#734 = ORIENTED_EDGE ( 'NONE', *, *, #301, .F. ) ;
|
||||
#735 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
|
||||
#736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#737 = EDGE_CURVE ( 'NONE', #7, #586, #178, .T. ) ;
|
||||
#738 = AXIS2_PLACEMENT_3D ( 'NONE', #700, #562, #209 ) ;
|
||||
#739 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ;
|
||||
#740 = CIRCLE ( 'NONE', #8, 0.1349999999999995100 ) ;
|
||||
#741 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #289, #413 ) ;
|
||||
#742 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.3850000000000000600, -4.338774769543363200 ) ) ;
|
||||
#743 = LINE ( 'NONE', #94, #128 ) ;
|
||||
#744 = VERTEX_POINT ( 'NONE', #207 ) ;
|
||||
#745 = CARTESIAN_POINT ( 'NONE', ( 0.8332028222822542900, 0.9799999999999999800, -6.724195096765828200 ) ) ;
|
||||
#746 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 0.2999999999999995400, -7.500000000000000000 ) ) ;
|
||||
#747 = PRODUCT ( 'sec_1', 'sec_1', '', ( #341 ) ) ;
|
||||
#748 = EDGE_CURVE ( 'NONE', #130, #443, #760, .T. ) ;
|
||||
#749 = ORIENTED_EDGE ( 'NONE', *, *, #795, .F. ) ;
|
||||
#750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#751 = EDGE_CURVE ( 'NONE', #52, #7, #595, .T. ) ;
|
||||
#752 = VECTOR ( 'NONE', #330, 39.37007874015748100 ) ;
|
||||
#753 = EDGE_LOOP ( 'NONE', ( #431, #527, #244, #314, #75, #784, #62, #268 ) ) ;
|
||||
#754 = FACE_OUTER_BOUND ( 'NONE', #693, .T. ) ;
|
||||
#755 = ORIENTED_EDGE ( 'NONE', *, *, #788, .T. ) ;
|
||||
#756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#757 = DIRECTION ( 'NONE', ( 3.642463991552348600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#758 = EDGE_CURVE ( 'NONE', #350, #744, #432, .T. ) ;
|
||||
#759 = DIRECTION ( 'NONE', ( -1.665760971746501000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#760 = LINE ( 'NONE', #144, #469 ) ;
|
||||
#761 = LINE ( 'NONE', #282, #596 ) ;
|
||||
#762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#763 = EDGE_CURVE ( 'NONE', #708, #731, #638, .T. ) ;
|
||||
#764 = CARTESIAN_POINT ( 'NONE', ( 1.460000000000000000, 1.075000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#765 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ;
|
||||
#766 = FACE_OUTER_BOUND ( 'NONE', #580, .T. ) ;
|
||||
#767 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#768 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.8549999999999998700, -5.672139458933667600 ) ) ;
|
||||
#769 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#770 = EDGE_LOOP ( 'NONE', ( #17, #161, #159, #534, #199, #484 ) ) ;
|
||||
#771 = LINE ( 'NONE', #677, #377 ) ;
|
||||
#772 = VECTOR ( 'NONE', #686, 39.37007874015748100 ) ;
|
||||
#773 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.9799999999999999800, -6.650000000000000400 ) ) ;
|
||||
#774 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #31, #162 ) ;
|
||||
#775 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#776 = CARTESIAN_POINT ( 'NONE', ( 0.09359834161578858800, 0.4800000000000000900, -7.112817947282732900 ) ) ;
|
||||
#777 = EDGE_LOOP ( 'NONE', ( #19, #120, #255, #252, #110, #66 ) ) ;
|
||||
#778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#779 = CIRCLE ( 'NONE', #26, 0.2199999999999992800 ) ;
|
||||
#780 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
|
||||
#781 = ORIENTED_EDGE ( 'NONE', *, *, #211, .T. ) ;
|
||||
#782 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#783 = LINE ( 'NONE', #746, #772 ) ;
|
||||
#784 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ;
|
||||
#785 = ORIENTED_EDGE ( 'NONE', *, *, #591, .T. ) ;
|
||||
#786 = EDGE_CURVE ( 'NONE', #515, #608, #79, .T. ) ;
|
||||
#787 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#788 = EDGE_CURVE ( 'NONE', #261, #474, #779, .T. ) ;
|
||||
#789 = VECTOR ( 'NONE', #141, 39.37007874015748100 ) ;
|
||||
#790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#791 = VERTEX_POINT ( 'NONE', #204 ) ;
|
||||
#792 = ORIENTED_EDGE ( 'NONE', *, *, #430, .T. ) ;
|
||||
#793 = LINE ( 'NONE', #478, #160 ) ;
|
||||
#794 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ;
|
||||
#795 = EDGE_CURVE ( 'NONE', #20, #223, #740, .T. ) ;
|
||||
#796 = LINE ( 'NONE', #607, #328 ) ;
|
||||
#797 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ;
|
||||
#798 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#799 = VECTOR ( 'NONE', #317, 39.37007874015748100 ) ;
|
||||
#800 = EDGE_LOOP ( 'NONE', ( #657, #271, #715, #585 ) ) ;
|
||||
#801 = CARTESIAN_POINT ( 'NONE', ( -0.5499999999999991600, 0.9799999999999999800, -7.112817947282732900 ) ) ;
|
||||
#802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#803 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#804 = VECTOR ( 'NONE', #439, 39.37007874015748100 ) ;
|
||||
#805 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ;
|
||||
#806 = ORIENTED_EDGE ( 'NONE', *, *, #525, .F. ) ;
|
||||
#807 = CIRCLE ( 'NONE', #281, 0.2199999999999992800 ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -1,28 +0,0 @@
|
|||
# Single Shot Polymer AR-15 Upper Receiver -Proteus
|
||||
|
||||
#### Caliber
|
||||
.380 ACP
|
||||
|
||||
#### Test Status:
|
||||
Untested
|
||||
|
||||
#### Description
|
||||
This is a 3D-Printable Single Shot AR-15 Upper Receiver. The goal behind this is to allow those living
|
||||
in the state of California to have a gun they can print without it being called a "Zip gun". Because this uses the AR-15 lower,
|
||||
which is legally by itself a gun, this is not a zipgun (meets criteria of being designed by a licensed manufacturer which the AR-15
|
||||
meets).
|
||||
|
||||
#### Instructions
|
||||
Print out either the full Upper if you have a printer capable of doing +7.5 ", or both pieces and use MEK to fuse them together completely.
|
||||
This design as-is will only work with a Charon v3.0 ABS Lower Receiver, however a slight modification to the rear takedown hole will allow a normal lower to be used.
|
||||
Add a 3.7 oz piece of metal to either the Upper or the Lower to comply with the UFA. This must be epoxyed on. For materials, do not use PLA.
|
||||
Use ABS in most cases. If you want to use PC, PETT, or Nylon, you must print it in one piece.
|
||||
|
||||
The barrel needs to be acetone treated before firing as would a liberator barrel. Insert barrel and twist 45 degrees to lock in place.
|
||||
|
||||
Insert a nail into the hole at the back of the barrel area for a firing pin.
|
||||
|
||||
This design requires a LPK (Lower Parts Kit). However, leave out the catch and the mag release (The catch will not even allow the upper to be mounted, and the release is useless as a mag is impossible in this design.)
|
||||
Printing a LPK is not reccomended as the parts would likely not stand up to the stress. When firing, the AR-15 Hammer is cocked back so as to hit the firing pin.
|
||||
|
||||
The creator takes no resposibility for any damage caused by this design. Use at your own risk.
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 224 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 207 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 145 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -1,612 +0,0 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP214' ),
|
||||
'1' );
|
||||
FILE_NAME ('SS_upper_barrel.STEP',
|
||||
'2013-09-13T23:18:57',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#2 = FACE_OUTER_BOUND ( 'NONE', #383, .T. ) ;
|
||||
#3 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #105, #244 ) ;
|
||||
#4 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ;
|
||||
#5 = AXIS2_PLACEMENT_3D ( 'NONE', #23, #347, #490 ) ;
|
||||
#6 = CIRCLE ( 'NONE', #567, 0.1000000000000000200 ) ;
|
||||
#7 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#8 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#9 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#10 = VECTOR ( 'NONE', #412, 39.37007874015748100 ) ;
|
||||
#11 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -0.1950000000000000100 ) ) ;
|
||||
#12 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -0.5399999999999999200 ) ) ;
|
||||
#13 = EDGE_LOOP ( 'NONE', ( #193, #488, #315, #219 ) ) ;
|
||||
#14 = VERTEX_POINT ( 'NONE', #12 ) ;
|
||||
#15 = EDGE_CURVE ( 'NONE', #237, #261, #205, .T. ) ;
|
||||
#16 = LINE ( 'NONE', #441, #489 ) ;
|
||||
#17 = ORIENTED_EDGE ( 'NONE', *, *, #537, .T. ) ;
|
||||
#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#19 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#20 = VERTEX_POINT ( 'NONE', #431 ) ;
|
||||
#21 = ORIENTED_EDGE ( 'NONE', *, *, #469, .F. ) ;
|
||||
#22 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #157, 'distance_accuracy_value', 'NONE');
|
||||
#23 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#24 = EDGE_CURVE ( 'NONE', #88, #237, #571, .T. ) ;
|
||||
#25 = SHAPE_DEFINITION_REPRESENTATION ( #365, #369 ) ;
|
||||
#26 = LINE ( 'NONE', #565, #379 ) ;
|
||||
#27 = EDGE_CURVE ( 'NONE', #560, #170, #225, .T. ) ;
|
||||
#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#29 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.2800000000000000300, 0.03999999999999999400 ) ) ;
|
||||
#30 = EDGE_LOOP ( 'NONE', ( #330, #211, #266, #550 ) ) ;
|
||||
#31 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#32 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #241, #430 ) ;
|
||||
#33 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#34 = LINE ( 'NONE', #316, #250 ) ;
|
||||
#35 = VECTOR ( 'NONE', #483, 39.37007874015748100 ) ;
|
||||
#36 = EDGE_CURVE ( 'NONE', #525, #545, #538, .T. ) ;
|
||||
#37 = CARTESIAN_POINT ( 'NONE', ( 2.388061258337338700E-017, 4.900000000000000400, 0.1950000000000000100 ) ) ;
|
||||
#38 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ;
|
||||
#39 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ;
|
||||
#40 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#41 = LINE ( 'NONE', #194, #246 ) ;
|
||||
#42 = CARTESIAN_POINT ( 'NONE', ( 5.388445916248353300E-017, 4.900000000000000400, -0.4399999999999999500 ) ) ;
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #338, .F. ) ;
|
||||
#44 = ORIENTED_EDGE ( 'NONE', *, *, #338, .T. ) ;
|
||||
#45 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ;
|
||||
#46 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.2949999999999999800 ) ) ;
|
||||
#47 = ORIENTED_EDGE ( 'NONE', *, *, #99, .T. ) ;
|
||||
#48 = EDGE_CURVE ( 'NONE', #377, #548, #415, .T. ) ;
|
||||
#49 = SURFACE_STYLE_FILL_AREA ( #436 ) ;
|
||||
#50 = FACE_OUTER_BOUND ( 'NONE', #238, .T. ) ;
|
||||
#51 = ADVANCED_FACE ( 'NONE', ( #289 ), #568, .T. ) ;
|
||||
#52 = EDGE_CURVE ( 'NONE', #255, #262, #102, .T. ) ;
|
||||
#53 = LINE ( 'NONE', #29, #94 ) ;
|
||||
#54 = PLANE ( 'NONE', #432 ) ;
|
||||
#55 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
|
||||
#56 = PLANE ( 'NONE', #3 ) ;
|
||||
#57 = EDGE_CURVE ( 'NONE', #526, #410, #209, .T. ) ;
|
||||
#58 = FACE_OUTER_BOUND ( 'NONE', #399, .T. ) ;
|
||||
#59 = VERTEX_POINT ( 'NONE', #534 ) ;
|
||||
#60 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, -0.04000000000000000100 ) ) ;
|
||||
#61 = AXIS2_PLACEMENT_3D ( 'NONE', #295, #523, #110 ) ;
|
||||
#62 = ORIENTED_EDGE ( 'NONE', *, *, #24, .T. ) ;
|
||||
#63 = VECTOR ( 'NONE', #233, 39.37007874015748100 ) ;
|
||||
#64 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #520, #516 ) ;
|
||||
#65 = VECTOR ( 'NONE', #439, 39.37007874015748100 ) ;
|
||||
#66 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#67 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#68 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#71 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude2', #318 ) ;
|
||||
#72 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.2800000000000000300, 0.04000000000000000100 ) ) ;
|
||||
#73 = CARTESIAN_POINT ( 'NONE', ( 2.388061258337338700E-017, 5.000000000000000000, 0.1950000000000000100 ) ) ;
|
||||
#74 = SURFACE_STYLE_USAGE ( .BOTH. , #486 ) ;
|
||||
#75 = EDGE_LOOP ( 'NONE', ( #449, #494, #361, #341 ) ) ;
|
||||
#76 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, -0.04000000000000000800 ) ) ;
|
||||
#77 = FACE_OUTER_BOUND ( 'NONE', #204, .T. ) ;
|
||||
#78 = VECTOR ( 'NONE', #435, 39.37007874015748100 ) ;
|
||||
#79 = EDGE_CURVE ( 'NONE', #144, #509, #111, .T. ) ;
|
||||
#80 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.4399999999999999500 ) ) ;
|
||||
#81 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#82 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#83 = PRESENTATION_STYLE_ASSIGNMENT (( #74 ) ) ;
|
||||
#84 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #276 ) ) ;
|
||||
#85 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#86 = EDGE_CURVE ( 'NONE', #262, #255, #456, .T. ) ;
|
||||
#87 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#88 = VERTEX_POINT ( 'NONE', #158 ) ;
|
||||
#89 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #381, #118 ) ;
|
||||
#90 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#91 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#92 = LINE ( 'NONE', #429, #570 ) ;
|
||||
#93 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#94 = VECTOR ( 'NONE', #166, 39.37007874015748100 ) ;
|
||||
#95 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #106 ) ) ;
|
||||
#96 = PLANE ( 'NONE', #527 ) ;
|
||||
#97 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#98 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#99 = EDGE_CURVE ( 'NONE', #144, #428, #53, .T. ) ;
|
||||
#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#101 = LINE ( 'NONE', #147, #288 ) ;
|
||||
#102 = CIRCLE ( 'NONE', #196, 0.1950000000000000100 ) ;
|
||||
#103 = PLANE ( 'NONE', #561 ) ;
|
||||
#104 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.2800000000000003000, -0.04000000000000000800 ) ) ;
|
||||
#105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#106 = STYLED_ITEM ( 'NONE', ( #296 ), #369 ) ;
|
||||
#107 = ORIENTED_EDGE ( 'NONE', *, *, #79, .T. ) ;
|
||||
#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#109 = LINE ( 'NONE', #290, #444 ) ;
|
||||
#110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#111 = CIRCLE ( 'NONE', #546, 0.5399999999999999200 ) ;
|
||||
#112 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#113 = EDGE_CURVE ( 'NONE', #350, #59, #445, .T. ) ;
|
||||
#114 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#115 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ;
|
||||
#116 = EDGE_CURVE ( 'NONE', #350, #334, #563, .T. ) ;
|
||||
#117 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
|
||||
#118 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#119 = CIRCLE ( 'NONE', #499, 0.1950000000000000100 ) ;
|
||||
#120 = LINE ( 'NONE', #76, #35 ) ;
|
||||
#121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#122 = EDGE_LOOP ( 'NONE', ( #68, #477, #303, #562 ) ) ;
|
||||
#123 = ORIENTED_EDGE ( 'NONE', *, *, #222, .F. ) ;
|
||||
#124 =( CONVERSION_BASED_UNIT ( 'INCH', #579 ) LENGTH_UNIT ( ) NAMED_UNIT ( #91 ) );
|
||||
#125 = AXIS2_PLACEMENT_3D ( 'NONE', #328, #506, #324 ) ;
|
||||
#126 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#127 = CIRCLE ( 'NONE', #174, 0.5399999999999999200 ) ;
|
||||
#128 = ORIENTED_EDGE ( 'NONE', *, *, #537, .F. ) ;
|
||||
#129 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ;
|
||||
#130 = CARTESIAN_POINT ( 'NONE', ( 3.612708057484692000E-017, 4.900000000000000400, -0.2949999999999999800 ) ) ;
|
||||
#131 = CARTESIAN_POINT ( 'NONE', ( 3.612708057484692000E-017, 5.000000000000000000, -0.2949999999999999800 ) ) ;
|
||||
#132 = CYLINDRICAL_SURFACE ( 'NONE', #467, 0.5399999999999999200 ) ;
|
||||
#133 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;
|
||||
#134 = AXIS2_PLACEMENT_3D ( 'NONE', #385, #245, #574 ) ;
|
||||
#135 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, -0.04000000000000000800 ) ) ;
|
||||
#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#137 = ORIENTED_EDGE ( 'NONE', *, *, #388, .T. ) ;
|
||||
#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, -0.04000000000000000800 ) ) ;
|
||||
#139 = LINE ( 'NONE', #271, #10 ) ;
|
||||
#140 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #67, #69 ) ;
|
||||
#141 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#142 = ORIENTED_EDGE ( 'NONE', *, *, #254, .F. ) ;
|
||||
#143 = EDGE_LOOP ( 'NONE', ( #4, #215 ) ) ;
|
||||
#144 = VERTEX_POINT ( 'NONE', #393 ) ;
|
||||
#145 = AXIS2_PLACEMENT_3D ( 'NONE', #256, #346, #217 ) ;
|
||||
#146 = TOROIDAL_SURFACE ( 'NONE', #5, 0.4399999999999999500, 0.1000000000000000100 ) ;
|
||||
#147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 0.03999999999999999400 ) ) ;
|
||||
#148 = EDGE_LOOP ( 'NONE', ( #286, #207, #351, #171 ) ) ;
|
||||
#149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#150 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
|
||||
#151 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#152 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#153 = EDGE_CURVE ( 'NONE', #20, #509, #120, .T. ) ;
|
||||
#154 = CIRCLE ( 'NONE', #411, 0.1000000000000000200 ) ;
|
||||
#155 = CARTESIAN_POINT ( 'NONE', ( 6.000769315822029800E-017, 5.000000000000000000, -0.4399999999999999500 ) ) ;
|
||||
#156 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #588, #448 ) ;
|
||||
#157 =( CONVERSION_BASED_UNIT ( 'INCH', #487 ) LENGTH_UNIT ( ) NAMED_UNIT ( #511 ) );
|
||||
#158 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, 0.03999999999999999400 ) ) ;
|
||||
#159 = ORIENTED_EDGE ( 'NONE', *, *, #592, .F. ) ;
|
||||
#160 = FACE_OUTER_BOUND ( 'NONE', #519, .T. ) ;
|
||||
#161 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ;
|
||||
#162 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.2800000000000003000, 0.04000000000000000100 ) ) ;
|
||||
#163 = EDGE_CURVE ( 'NONE', #410, #466, #199, .T. ) ;
|
||||
#164 = ORIENTED_EDGE ( 'NONE', *, *, #247, .F. ) ;
|
||||
#165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#167 = VECTOR ( 'NONE', #172, 39.37007874015748100 ) ;
|
||||
#168 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#169 = FILL_AREA_STYLE ('',( #257 ) ) ;
|
||||
#170 = VERTEX_POINT ( 'NONE', #162 ) ;
|
||||
#171 = ORIENTED_EDGE ( 'NONE', *, *, #222, .T. ) ;
|
||||
#172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#173 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
|
||||
#174 = AXIS2_PLACEMENT_3D ( 'NONE', #396, #484, #536 ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
|
||||
#176 = FACE_OUTER_BOUND ( 'NONE', #148, .T. ) ;
|
||||
#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#178 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#179 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #424, #468 ) ;
|
||||
#180 = EDGE_LOOP ( 'NONE', ( #214, #231 ) ) ;
|
||||
#181 = ADVANCED_FACE ( 'NONE', ( #450 ), #514, .T. ) ;
|
||||
#182 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#183 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ;
|
||||
#184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#185 = DIRECTION ( 'NONE', ( 1.224646799147353500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#186 = EDGE_CURVE ( 'NONE', #234, #14, #127, .T. ) ;
|
||||
#187 = EDGE_LOOP ( 'NONE', ( #43, #183, #137, #278 ) ) ;
|
||||
#188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#189 = ORIENTED_EDGE ( 'NONE', *, *, #447, .F. ) ;
|
||||
#190 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#191 = ADVANCED_FACE ( 'NONE', ( #299 ), #146, .T. ) ;
|
||||
#192 = LINE ( 'NONE', #73, #218 ) ;
|
||||
#193 = ORIENTED_EDGE ( 'NONE', *, *, #447, .T. ) ;
|
||||
#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, -0.1950000000000000100 ) ) ;
|
||||
#195 = PLANE ( 'NONE', #179 ) ;
|
||||
#196 = AXIS2_PLACEMENT_3D ( 'NONE', #437, #304, #121 ) ;
|
||||
#197 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.03999999999999999400 ) ) ;
|
||||
#198 = PLANE ( 'NONE', #32 ) ;
|
||||
#199 = LINE ( 'NONE', #19, #327 ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#201 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ;
|
||||
#202 = AXIS2_PLACEMENT_3D ( 'NONE', #420, #141, #325 ) ;
|
||||
#203 = PRODUCT_CONTEXT ( 'NONE', #531, 'mechanical' ) ;
|
||||
#204 = EDGE_LOOP ( 'NONE', ( #142, #404, #302, #243 ) ) ;
|
||||
#205 = LINE ( 'NONE', #301, #78 ) ;
|
||||
#206 = EDGE_CURVE ( 'NONE', #255, #545, #192, .T. ) ;
|
||||
#207 = ORIENTED_EDGE ( 'NONE', *, *, #57, .F. ) ;
|
||||
#208 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#209 = LINE ( 'NONE', #253, #65 ) ;
|
||||
#210 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #478, #18 ) ;
|
||||
#211 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ;
|
||||
#212 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#213 = EDGE_CURVE ( 'NONE', #419, #170, #16, .T. ) ;
|
||||
#214 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
|
||||
#215 = ORIENTED_EDGE ( 'NONE', *, *, #469, .T. ) ;
|
||||
#216 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #310, #70 ) ;
|
||||
#217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#218 = VECTOR ( 'NONE', #126, 39.37007874015748100 ) ;
|
||||
#219 = ORIENTED_EDGE ( 'NONE', *, *, #57, .T. ) ;
|
||||
#220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#221 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
|
||||
#222 = EDGE_CURVE ( 'NONE', #419, #466, #139, .T. ) ;
|
||||
#223 = PLANE ( 'NONE', #263 ) ;
|
||||
#224 = FACE_OUTER_BOUND ( 'NONE', #345, .T. ) ;
|
||||
#225 = CIRCLE ( 'NONE', #134, 0.5399999999999999200 ) ;
|
||||
#226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#227 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.2800000000000000300, -0.04000000000000000100 ) ) ;
|
||||
#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#229 = CYLINDRICAL_SURFACE ( 'NONE', #326, 0.1950000000000000100 ) ;
|
||||
#230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#231 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ;
|
||||
#232 = ADVANCED_FACE ( 'NONE', ( #454 ), #223, .F. ) ;
|
||||
#233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#234 = VERTEX_POINT ( 'NONE', #360 ) ;
|
||||
#235 = EDGE_CURVE ( 'NONE', #170, #279, #281, .T. ) ;
|
||||
#236 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, -0.04000000000000000100 ) ) ;
|
||||
#237 = VERTEX_POINT ( 'NONE', #590 ) ;
|
||||
#238 = EDGE_LOOP ( 'NONE', ( #21, #44, #129, #496 ) ) ;
|
||||
#239 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.2800000000000003000, -0.04000000000000000100 ) ) ;
|
||||
#240 = LINE ( 'NONE', #190, #586 ) ;
|
||||
#241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#242 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#243 = ORIENTED_EDGE ( 'NONE', *, *, #502, .T. ) ;
|
||||
#244 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#246 = VECTOR ( 'NONE', #93, 39.37007874015748100 ) ;
|
||||
#247 = EDGE_CURVE ( 'NONE', #466, #279, #34, .T. ) ;
|
||||
#248 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ;
|
||||
#249 = AXIS2_PLACEMENT_3D ( 'NONE', #532, #391, #108 ) ;
|
||||
#250 = VECTOR ( 'NONE', #498, 39.37007874015748100 ) ;
|
||||
#251 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ;
|
||||
#252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#253 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, -0.04000000000000000100 ) ) ;
|
||||
#254 = EDGE_CURVE ( 'NONE', #261, #268, #258, .T. ) ;
|
||||
#255 = VERTEX_POINT ( 'NONE', #37 ) ;
|
||||
#256 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#257 = FILL_AREA_STYLE_COLOUR ( '', #390 ) ;
|
||||
#258 = LINE ( 'NONE', #313, #505 ) ;
|
||||
#259 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #522, #149 ) ;
|
||||
#260 = CARTESIAN_POINT ( 'NONE', ( 6.613092715395707500E-017, 4.900000000000000400, 0.5399999999999999200 ) ) ;
|
||||
#261 = VERTEX_POINT ( 'NONE', #355 ) ;
|
||||
#262 = VERTEX_POINT ( 'NONE', #446 ) ;
|
||||
#263 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #136, #451 ) ;
|
||||
#264 = PLANE ( 'NONE', #125 ) ;
|
||||
#265 = LINE ( 'NONE', #227, #63 ) ;
|
||||
#266 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ;
|
||||
#267 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#268 = VERTEX_POINT ( 'NONE', #269 ) ;
|
||||
#269 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.0000000000000000000, -0.04000000000000000800 ) ) ;
|
||||
#270 = EDGE_LOOP ( 'NONE', ( #476, #201, #107, #395 ) ) ;
|
||||
#271 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, 0.04000000000000000100 ) ) ;
|
||||
#272 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #503, #552 ) ;
|
||||
#273 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#274 = FACE_OUTER_BOUND ( 'NONE', #180, .T. ) ;
|
||||
#275 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#276 = STYLED_ITEM ( 'NONE', ( #83 ), #71 ) ;
|
||||
#277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#278 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ;
|
||||
#279 = VERTEX_POINT ( 'NONE', #354 ) ;
|
||||
#280 = ADVANCED_FACE ( 'NONE', ( #2 ), #495, .T. ) ;
|
||||
#281 = LINE ( 'NONE', #72, #167 ) ;
|
||||
#282 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #555 ) ) ;
|
||||
#283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#284 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
|
||||
#285 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #405, #220 ) ;
|
||||
#286 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ;
|
||||
#287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#288 = VECTOR ( 'NONE', #463, 39.37007874015748100 ) ;
|
||||
#289 = FACE_OUTER_BOUND ( 'NONE', #575, .T. ) ;
|
||||
#290 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, -0.5399999999999999200 ) ) ;
|
||||
#291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#292 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#293 = ORIENTED_EDGE ( 'NONE', *, *, #502, .F. ) ;
|
||||
#294 = VERTEX_POINT ( 'NONE', #131 ) ;
|
||||
#295 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#296 = PRESENTATION_STYLE_ASSIGNMENT (( #573 ) ) ;
|
||||
#297 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#298 = VECTOR ( 'NONE', #407, 39.37007874015748100 ) ;
|
||||
#299 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
|
||||
#300 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #175, #544 ) ;
|
||||
#301 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#302 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ;
|
||||
#303 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ;
|
||||
#304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#305 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#306 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #380 );
|
||||
#307 = ORIENTED_EDGE ( 'NONE', *, *, #595, .F. ) ;
|
||||
#308 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#309 = AXIS2_PLACEMENT_3D ( 'NONE', #42, #366, #185 ) ;
|
||||
#310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#311 = CIRCLE ( 'NONE', #249, 0.5399999999999999200 ) ;
|
||||
#312 = EDGE_CURVE ( 'NONE', #350, #377, #154, .T. ) ;
|
||||
#313 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -0.04000000000000000800 ) ) ;
|
||||
#314 = CYLINDRICAL_SURFACE ( 'NONE', #541, 0.1950000000000000100 ) ;
|
||||
#315 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
|
||||
#316 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.04000000000000000100 ) ) ;
|
||||
#317 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #555, .NOT_KNOWN. ) ;
|
||||
#318 = CLOSED_SHELL ( 'NONE', ( #191, #504, #417, #280, #319, #500, #408, #549, #181, #321, #359, #414, #497, #232, #51, #591, #455, #558 ) ) ;
|
||||
#319 = ADVANCED_FACE ( 'NONE', ( #160 ), #132, .T. ) ;
|
||||
#320 = EDGE_CURVE ( 'NONE', #545, #525, #119, .T. ) ;
|
||||
#321 = ADVANCED_FACE ( 'NONE', ( #397 ), #513, .T. ) ;
|
||||
#322 = EDGE_CURVE ( 'NONE', #20, #261, #474, .T. ) ;
|
||||
#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#324 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#326 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #336, #9 ) ;
|
||||
#327 = VECTOR ( 'NONE', #580, 39.37007874015748100 ) ;
|
||||
#328 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#329 = EDGE_CURVE ( 'NONE', #526, #419, #421, .T. ) ;
|
||||
#330 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
|
||||
#331 = VECTOR ( 'NONE', #308, 39.37007874015748100 ) ;
|
||||
#332 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, -0.04000000000000000100 ) ) ;
|
||||
#333 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ;
|
||||
#334 = VERTEX_POINT ( 'NONE', #358 ) ;
|
||||
#335 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#336 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#337 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, 0.03999999999999999400 ) ) ;
|
||||
#338 = EDGE_CURVE ( 'NONE', #294, #262, #371, .T. ) ;
|
||||
#339 = TOROIDAL_SURFACE ( 'NONE', #64, 0.2949999999999999800, 0.1000000000000000100 ) ;
|
||||
#340 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#341 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
|
||||
#342 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #531 ) ;
|
||||
#343 = CIRCLE ( 'NONE', #202, 0.5399999999999999200 ) ;
|
||||
#344 = CARTESIAN_POINT ( 'NONE', ( 6.613092715395707500E-017, 5.000000000000000000, 0.5399999999999999200 ) ) ;
|
||||
#345 = EDGE_LOOP ( 'NONE', ( #164, #123, #493, #382 ) ) ;
|
||||
#346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#348 = VECTOR ( 'NONE', #465, 39.37007874015748100 ) ;
|
||||
#349 = VECTOR ( 'NONE', #418, 39.37007874015748100 ) ;
|
||||
#350 = VERTEX_POINT ( 'NONE', #260 ) ;
|
||||
#351 = ORIENTED_EDGE ( 'NONE', *, *, #329, .T. ) ;
|
||||
#352 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
|
||||
#353 = EDGE_CURVE ( 'NONE', #548, #377, #529, .T. ) ;
|
||||
#354 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.0000000000000000000, 0.04000000000000000100 ) ) ;
|
||||
#355 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.0000000000000000000, -0.04000000000000000800 ) ) ;
|
||||
#356 = CIRCLE ( 'NONE', #572, 0.2949999999999999800 ) ;
|
||||
#357 = SURFACE_STYLE_FILL_AREA ( #169 ) ;
|
||||
#358 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, -0.5399999999999999200 ) ) ;
|
||||
#359 = ADVANCED_FACE ( 'NONE', ( #176 ), #264, .T. ) ;
|
||||
#360 = CARTESIAN_POINT ( 'NONE', ( 0.5385164807134503700, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
|
||||
#361 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
|
||||
#362 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.2800000000000000300, 0.04000000000000000100 ) ) ;
|
||||
#363 = CIRCLE ( 'NONE', #259, 0.5399999999999999200 ) ;
|
||||
#364 = CIRCLE ( 'NONE', #457, 0.2949999999999999800 ) ;
|
||||
#365 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #406 ) ;
|
||||
#366 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
|
||||
#367 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.0000000000000000000, 0.03999999999999999400 ) ) ;
|
||||
#368 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#369 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'SS_upper_barrel', ( #71, #140 ), #475 ) ;
|
||||
#370 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#371 = CIRCLE ( 'NONE', #300, 0.1000000000000000200 ) ;
|
||||
#372 = VECTOR ( 'NONE', #566, 39.37007874015748100 ) ;
|
||||
#373 = AXIS2_PLACEMENT_3D ( 'NONE', #528, #291, #387 ) ;
|
||||
#374 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.2949999999999999800 ) ) ;
|
||||
#375 = EDGE_CURVE ( 'NONE', #560, #234, #265, .T. ) ;
|
||||
#376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#377 = VERTEX_POINT ( 'NONE', #453 ) ;
|
||||
#378 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.04000000000000000100 ) ) ;
|
||||
#379 = VECTOR ( 'NONE', #376, 39.37007874015748100 ) ;
|
||||
#380 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#381 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#382 = ORIENTED_EDGE ( 'NONE', *, *, #235, .T. ) ;
|
||||
#383 = EDGE_LOOP ( 'NONE', ( #221, #524, #460, #530, #39, #423, #507, #128 ) ) ;
|
||||
#384 = SURFACE_SIDE_STYLE ('',( #49 ) ) ;
|
||||
#385 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#386 =( CONVERSION_BASED_UNIT ( 'INCH', #306 ) LENGTH_UNIT ( ) NAMED_UNIT ( #97 ) );
|
||||
#387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#388 = EDGE_CURVE ( 'NONE', #547, #255, #6, .T. ) ;
|
||||
#389 = VECTOR ( 'NONE', #585, 39.37007874015748100 ) ;
|
||||
#390 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
|
||||
#391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#392 = ORIENTED_EDGE ( 'NONE', *, *, #400, .F. ) ;
|
||||
#393 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.2800000000000003000, 0.03999999999999999400 ) ) ;
|
||||
#394 = EDGE_LOOP ( 'NONE', ( #161, #189, #251, #508, #284, #307, #517, #426, #501, #159 ) ) ;
|
||||
#395 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ;
|
||||
#396 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#397 = FACE_OUTER_BOUND ( 'NONE', #470, .T. ) ;
|
||||
#398 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #106 ), #510 ) ;
|
||||
#399 = EDGE_LOOP ( 'NONE', ( #462, #409, #333, #62 ) ) ;
|
||||
#400 = EDGE_CURVE ( 'NONE', #334, #548, #403, .T. ) ;
|
||||
#401 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#402 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
|
||||
#403 = CIRCLE ( 'NONE', #309, 0.1000000000000000200 ) ;
|
||||
#404 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ;
|
||||
#405 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#406 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #317, #472 ) ;
|
||||
#407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#408 = ADVANCED_FACE ( 'NONE', ( #434, #583 ), #54, .F. ) ;
|
||||
#409 = ORIENTED_EDGE ( 'NONE', *, *, #99, .F. ) ;
|
||||
#410 = VERTEX_POINT ( 'NONE', #461 ) ;
|
||||
#411 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #85, #177 ) ;
|
||||
#412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#413 = EDGE_CURVE ( 'NONE', #88, #20, #240, .T. ) ;
|
||||
#414 = ADVANCED_FACE ( 'NONE', ( #557 ), #96, .F. ) ;
|
||||
#415 = CIRCLE ( 'NONE', #61, 0.4399999999999999500 ) ;
|
||||
#416 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#417 = ADVANCED_FACE ( 'NONE', ( #464 ), #314, .F. ) ;
|
||||
#418 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#419 = VERTEX_POINT ( 'NONE', #362 ) ;
|
||||
#420 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#421 = LINE ( 'NONE', #31, #298 ) ;
|
||||
#422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#423 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ;
|
||||
#424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#425 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#426 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
|
||||
#427 = FILL_AREA_STYLE_COLOUR ( '', #173 ) ;
|
||||
#428 = VERTEX_POINT ( 'NONE', #367 ) ;
|
||||
#429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.03999999999999999400 ) ) ;
|
||||
#430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#431 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.2800000000000000300, -0.04000000000000000800 ) ) ;
|
||||
#432 = AXIS2_PLACEMENT_3D ( 'NONE', #230, #87, #1 ) ;
|
||||
#433 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#434 = FACE_OUTER_BOUND ( 'NONE', #394, .T. ) ;
|
||||
#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#436 = FILL_AREA_STYLE ('',( #427 ) ) ;
|
||||
#437 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#438 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #276 ), #479 ) ;
|
||||
#439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#440 = EDGE_CURVE ( 'NONE', #547, #294, #364, .T. ) ;
|
||||
#441 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.04000000000000000100 ) ) ;
|
||||
#442 = EDGE_LOOP ( 'NONE', ( #593, #117, #133, #352 ) ) ;
|
||||
#443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#444 = VECTOR ( 'NONE', #7, 39.37007874015748100 ) ;
|
||||
#445 = LINE ( 'NONE', #344, #331 ) ;
|
||||
#446 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, -0.1950000000000000100 ) ) ;
|
||||
#447 = EDGE_CURVE ( 'NONE', #410, #234, #482, .T. ) ;
|
||||
#448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#449 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
|
||||
#450 = FACE_OUTER_BOUND ( 'NONE', #187, .T. ) ;
|
||||
#451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#452 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #124, 'distance_accuracy_value', 'NONE');
|
||||
#453 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.000000000000000000, 0.4399999999999999500 ) ) ;
|
||||
#454 = FACE_OUTER_BOUND ( 'NONE', #442, .T. ) ;
|
||||
#455 = ADVANCED_FACE ( 'NONE', ( #77 ), #551, .T. ) ;
|
||||
#456 = CIRCLE ( 'NONE', #216, 0.1950000000000000100 ) ;
|
||||
#457 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #90, #228 ) ;
|
||||
#458 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.0000000000000000000, 0.04000000000000000100 ) ) ;
|
||||
#459 = EDGE_CURVE ( 'NONE', #334, #350, #343, .T. ) ;
|
||||
#460 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
|
||||
#461 = CARTESIAN_POINT ( 'NONE', ( 0.5799999999999999600, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
|
||||
#462 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ;
|
||||
#463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#464 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ;
|
||||
#465 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#466 = VERTEX_POINT ( 'NONE', #458 ) ;
|
||||
#467 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #82, #40 ) ;
|
||||
#468 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#469 = EDGE_CURVE ( 'NONE', #294, #547, #356, .T. ) ;
|
||||
#470 = EDGE_LOOP ( 'NONE', ( #392, #553, #533, #45 ) ) ;
|
||||
#471 = CARTESIAN_POINT ( 'NONE', ( 2.388061258337338700E-017, 0.0000000000000000000, 0.1950000000000000100 ) ) ;
|
||||
#472 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #340, 'design' ) ;
|
||||
#473 = LINE ( 'NONE', #60, #348 ) ;
|
||||
#474 = LINE ( 'NONE', #135, #389 ) ;
|
||||
#475 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #22 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #157, #297, #112 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#476 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ;
|
||||
#477 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
|
||||
#478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#479 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #452 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #124, #540, #212 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#480 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #340 ) ;
|
||||
#481 = ORIENTED_EDGE ( 'NONE', *, *, #79, .F. ) ;
|
||||
#482 = LINE ( 'NONE', #594, #349 ) ;
|
||||
#483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#485 = ORIENTED_EDGE ( 'NONE', *, *, #24, .F. ) ;
|
||||
#486 = SURFACE_SIDE_STYLE ('',( #357 ) ) ;
|
||||
#487 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #577 );
|
||||
#488 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ;
|
||||
#489 = VECTOR ( 'NONE', #168, 39.37007874015748100 ) ;
|
||||
#490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#491 = EDGE_CURVE ( 'NONE', #262, #525, #41, .T. ) ;
|
||||
#492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#493 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
|
||||
#494 = ORIENTED_EDGE ( 'NONE', *, *, #400, .T. ) ;
|
||||
#495 = CYLINDRICAL_SURFACE ( 'NONE', #285, 0.5399999999999999200 ) ;
|
||||
#496 = ORIENTED_EDGE ( 'NONE', *, *, #388, .F. ) ;
|
||||
#497 = ADVANCED_FACE ( 'NONE', ( #224 ), #56, .T. ) ;
|
||||
#498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#499 = AXIS2_PLACEMENT_3D ( 'NONE', #267, #226, #492 ) ;
|
||||
#500 = ADVANCED_FACE ( 'NONE', ( #542, #274 ), #198, .T. ) ;
|
||||
#501 = ORIENTED_EDGE ( 'NONE', *, *, #254, .T. ) ;
|
||||
#502 = EDGE_CURVE ( 'NONE', #509, #268, #26, .T. ) ;
|
||||
#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#504 = ADVANCED_FACE ( 'NONE', ( #50 ), #339, .T. ) ;
|
||||
#505 = VECTOR ( 'NONE', #33, 39.37007874015748100 ) ;
|
||||
#506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#507 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ;
|
||||
#508 = ORIENTED_EDGE ( 'NONE', *, *, #247, .T. ) ;
|
||||
#509 = VERTEX_POINT ( 'NONE', #104 ) ;
|
||||
#510 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #521 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #386, #433, #114 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#511 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#513 = TOROIDAL_SURFACE ( 'NONE', #156, 0.4399999999999999500, 0.1000000000000000100 ) ;
|
||||
#514 = TOROIDAL_SURFACE ( 'NONE', #145, 0.2949999999999999800, 0.1000000000000000100 ) ;
|
||||
#515 = EDGE_CURVE ( 'NONE', #88, #144, #92, .T. ) ;
|
||||
#516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#517 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ;
|
||||
#518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#519 = EDGE_LOOP ( 'NONE', ( #55, #150, #17, #581, #293, #481, #47, #587 ) ) ;
|
||||
#520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#521 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #386, 'distance_accuracy_value', 'NONE');
|
||||
#522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#524 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
|
||||
#525 = VERTEX_POINT ( 'NONE', #11 ) ;
|
||||
#526 = VERTEX_POINT ( 'NONE', #332 ) ;
|
||||
#527 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #512, #554 ) ;
|
||||
#528 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#529 = CIRCLE ( 'NONE', #535, 0.4399999999999999500 ) ;
|
||||
#530 = ORIENTED_EDGE ( 'NONE', *, *, #235, .F. ) ;
|
||||
#531 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#533 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
|
||||
#534 = CARTESIAN_POINT ( 'NONE', ( 6.613092715395707500E-017, 0.0000000000000000000, 0.5399999999999999200 ) ) ;
|
||||
#535 = AXIS2_PLACEMENT_3D ( 'NONE', #368, #283, #277 ) ;
|
||||
#536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#537 = EDGE_CURVE ( 'NONE', #334, #14, #109, .T. ) ;
|
||||
#538 = CIRCLE ( 'NONE', #373, 0.1950000000000000100 ) ;
|
||||
#539 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.900000000000000400, 0.0000000000000000000 ) ) ;
|
||||
#540 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#541 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #416, #188 ) ;
|
||||
#542 = FACE_BOUND ( 'NONE', #143, .T. ) ;
|
||||
#543 = EDGE_LOOP ( 'NONE', ( #248, #559 ) ) ;
|
||||
#544 = DIRECTION ( 'NONE', ( 1.224646799147353500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#545 = VERTEX_POINT ( 'NONE', #471 ) ;
|
||||
#546 = AXIS2_PLACEMENT_3D ( 'NONE', #582, #28, #165 ) ;
|
||||
#547 = VERTEX_POINT ( 'NONE', #374 ) ;
|
||||
#548 = VERTEX_POINT ( 'NONE', #155 ) ;
|
||||
#549 = ADVANCED_FACE ( 'NONE', ( #569 ), #229, .F. ) ;
|
||||
#550 = ORIENTED_EDGE ( 'NONE', *, *, #320, .F. ) ;
|
||||
#551 = PLANE ( 'NONE', #272 ) ;
|
||||
#552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#553 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
|
||||
#554 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#555 = PRODUCT ( 'SS_upper_barrel', 'SS_upper_barrel', '', ( #203 ) ) ;
|
||||
#556 = FACE_OUTER_BOUND ( 'NONE', #270, .T. ) ;
|
||||
#557 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ;
|
||||
#558 = ADVANCED_FACE ( 'NONE', ( #556 ), #195, .F. ) ;
|
||||
#559 = ORIENTED_EDGE ( 'NONE', *, *, #320, .T. ) ;
|
||||
#560 = VERTEX_POINT ( 'NONE', #239 ) ;
|
||||
#561 = AXIS2_PLACEMENT_3D ( 'NONE', #197, #518, #242 ) ;
|
||||
#562 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ;
|
||||
#563 = CIRCLE ( 'NONE', #576, 0.5399999999999999200 ) ;
|
||||
#564 = EDGE_CURVE ( 'NONE', #237, #428, #101, .T. ) ;
|
||||
#565 = CARTESIAN_POINT ( 'NONE', ( -0.5385164807134503700, 0.2800000000000000300, -0.04000000000000000800 ) ) ;
|
||||
#566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#567 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #275, #184 ) ;
|
||||
#568 = PLANE ( 'NONE', #89 ) ;
|
||||
#569 = FACE_OUTER_BOUND ( 'NONE', #30, .T. ) ;
|
||||
#570 = VECTOR ( 'NONE', #8, 39.37007874015748100 ) ;
|
||||
#571 = LINE ( 'NONE', #337, #372 ) ;
|
||||
#572 = AXIS2_PLACEMENT_3D ( 'NONE', #425, #152, #287 ) ;
|
||||
#573 = SURFACE_STYLE_USAGE ( .BOTH. , #384 ) ;
|
||||
#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#575 = EDGE_LOOP ( 'NONE', ( #402, #485, #38, #115 ) ) ;
|
||||
#576 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #305, #443 ) ;
|
||||
#577 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#578 = CIRCLE ( 'NONE', #210, 0.5399999999999999200 ) ;
|
||||
#579 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #208 );
|
||||
#580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#581 = ORIENTED_EDGE ( 'NONE', *, *, #592, .T. ) ;
|
||||
#582 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2800000000000000300, 0.0000000000000000000 ) ) ;
|
||||
#583 = FACE_BOUND ( 'NONE', #543, .T. ) ;
|
||||
#584 = EDGE_CURVE ( 'NONE', #59, #279, #363, .T. ) ;
|
||||
#585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#586 = VECTOR ( 'NONE', #422, 39.37007874015748100 ) ;
|
||||
#587 = ORIENTED_EDGE ( 'NONE', *, *, #595, .T. ) ;
|
||||
#588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#589 = EDGE_CURVE ( 'NONE', #526, #560, #473, .T. ) ;
|
||||
#590 = CARTESIAN_POINT ( 'NONE', ( -0.5799999999999999600, 0.0000000000000000000, 0.03999999999999999400 ) ) ;
|
||||
#591 = ADVANCED_FACE ( 'NONE', ( #58 ), #103, .F. ) ;
|
||||
#592 = EDGE_CURVE ( 'NONE', #14, #268, #578, .T. ) ;
|
||||
#593 = ORIENTED_EDGE ( 'NONE', *, *, #329, .F. ) ;
|
||||
#594 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -0.04000000000000000100 ) ) ;
|
||||
#595 = EDGE_CURVE ( 'NONE', #428, #59, #311, .T. ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue