Adding Madsen M-50 Magazine (Long) Extension by n0mad.

Rifles/Madsen_M-50-Magazine_Extension_Long-n0mad/README.md

@@ -0,0 +1,36 @@
+# N0mad's madsen m50 extra long magazine extension
+
+#### Author
+n0mad
+
+#### Version
+8.0
+
+#### License
+Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3). 
+
+#### Release Date
+2018/09/18
+
+#### Description
+This is a two part magazine extension for madsen m50 magazines.
+
+#### Test Record
+This was tested on with a madsen m50 submachine gun.  As of version 8 it feeds and runs when loaded up to 49 rounds (+17).
+
+#### Printing
+* All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
+* No support material needed
+* Print both pieces on their backs to preven the need of infill.
+* Print barrel standing on it rear end. 
+
+#### Finishing
+* Aquire six bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish. 
+* Drill out holes to fit bolt size. 
+* A longer magazine spring will be required. This extension should work with extended glock springs. 
+* I used the one found here. https://taccom3g.com/product/taccom-spring-kits/ The bolts and chicago screws will also work.
+* The existing follower will need to be removed and affixed the the glock spring. 
+* Clamp around magazine bolt down, no floor plate needed.  
+
+#### DISCLAIMER
+Use this information at your own risk and responsibility.