Adding The Grizzly Handgun by CanadianGunNut.

Firearms/Grizzly_Handgun-Canadiangunnut/README.md

@@ -0,0 +1,47 @@
+# The Grizzly Handgun
+#### Author
+Canadiangunnut
+
+#### Disclaimer
+The author of these files claims absolutely no liability for any damages, criminal charges, injury, or death resulting from use of these files.  
+
+#### Description
+This design is based off The Grizzly 2.0 Rifle that successfully fired multiple rounds of standard velocity .22LR ammunition.  The files are a ground up, from memory redraw and redesign, therefore no guarantee can be made to the successful  fit or function of the following files as they have not been field tested.  All safety precautions should be taken by anyone test firing a finished version (remote firing, etc.) which is done solely at the risk of the user.
+
+Like The Grizzly 2.0 this design borrows the idea of the coiled mainsprings from the Liberator designed by Defense Distributed.   Any files where the design is based on the work of Defense Distributed have been completely redrawn.  No files originating from the possession of Defense Distributed are contained in this .ZIP file.
+
+The .SLDPRT and .STEP files are included so any desired alterations can be made by the user.  If you alter this design please give credit to the original authors.
+
+#### Printing
+Original design printed in ABSplus.  No guarantee is made by the author to the fit, function or safety of any other material.  Also note 3D Printer quality and finished product quality varies greatly by brand.
+* Print the spring pin and hammer & trigger pin (X2) lying on their sides for best strength. 
+* Print the firing pin bushing, coil spring (X2 but it's good to print extras) and grip cap flat.
+* Print the hammer and trigger on their sides.
+* Print the spring pin bushing straight up.
+* Print the barrel straight up.
+* Print the receiver on it's side.
+
+# Assembly
+* See photos in ASSEMBLY folder
+
+For Americans wishing to follow the Undetectable Firearms Act print only the receiver and grip cap first.  Epoxy at least 6oz of steel into the hollow grip and glue the cap on.  Now you can print all the other parts.
+
+Due to 3D printers not printing holes to exact dimensions it may be a good idea to have on hand a small round needle file to enlarge any holes that are too tight and a flat file to reshape any pins that come out too large.
+
+Select a nail for your firing pin.  1" "Roofing Nails" from the local hardware store work great.  They have just under a 1/8" shaft diameter.  They may have barbs on the shaft that will need to be filed off, as well as any flashing around the base of the head.  File the nail to 1" total length and give it a rounded, centered tip.  This will help with ignition of primers.  When seated fully forward the nail should protrude about .050" into the barrel socket.
+
+After you place the nail in and check that it moves freely in the hole place the firing pin bushing in with the beveled side out facing the hammer nose.  Just place the bushing in so it sits level with the surrounding surface.  Once the gun is completed you can test various nails on empty cases until you get one that fires primers consistently and at that point it is  recommend to glue the bushing in. Superglue works great for this but make sure not to glue the nail in place.
+
+Next fit the coil springs over the lugs inside the receiver.  Something like a butter knife will help to press it on the lug once it is started.  The eyelet end of the spring will face forward, and make sure the outer large first coil loop faces the bottom of the opening even though as is the spring may not fit that well.  Later, the eyelet will be pulled up and back and be positioned behind the hammer and tighten the spring as the hammer is pulled back.
+
+Line up one of the spring eyelets so you can begin to insert the spring pin through the largest of the three holes on the side into the eyelet.   While holding the spring bushing in place between the two eyelets on the inside, from the outside drive the pin through the first eyelet, through the bushing, then the other eyelet.  Make sure the pin is centered so it does not catch on the inside of the receiver.
+Insert the trigger into the receiver.  Make sure the end  of the leaf spring arm goes into the slot at the bottom of the opening, it may help to push up the bottom of the coil springs near the trigger opening to move the spring bushing.  Insert the trigger pin in the lower of the three holes to secure it.  
+
+Take a piece of coat hanger wire and make a small hook on one end.  Use this to grab the bushing and carefully pull back the springs (not too far), and when clear fit the hammer in place while driving it's pin in through the upper small hole.   
+
+Now you can check the function.  The hammer should move freely with the springs behind it, and when pulled back enough the trigger should pop under the hammer's sear ledge and cock the hammer.  Pulling the trigger should release the hammer and the coil springs will snap it forward.  
+
+The barrel is easy, simply line up the lugs with the opening, insert all the way and twist clockwise until it locks into place making sure the front sight lines up the sight groove in the receiver.  Perform the reverse to remove.
+
+Do not pull the trigger much farther than it needs to be pulled or you may break the trigger spring.  Repeated cocking of the hammer will create stress fractures that will weaken the coil springs and eventually lead to cracks and failure.  
+

Firearms/Grizzly_Handgun-Canadiangunnut/STEP/firingpinbushing.step

@@ -0,0 +1,292 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('firingpinbushing.STEP',
+    '2013-10-27T06:42:52',
+    ( 'Matt' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = AXIS2_PLACEMENT_3D ( 'NONE', #165, #147, #82 ) ;
+#2 = FACE_BOUND ( 'NONE', #256, .T. ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ;
+#4 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #175 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #125, #252, #148 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#5 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#6 = VERTEX_POINT ( 'NONE', #251 ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#8 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #200, #250 ) ;
+#9 = CIRCLE ( 'NONE', #55, 0.2200000000000000000 ) ;
+#10 = CYLINDRICAL_SURFACE ( 'NONE', #27, 0.1600000000000000300 ) ;
+#11 = AXIS2_PLACEMENT_3D ( 'NONE', #47, #199, #103 ) ;
+#12 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ;
+#13 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'firingpinbushing', ( #219, #114 ), #4 ) ;
+#14 = VERTEX_POINT ( 'NONE', #257 ) ;
+#15 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#16 = CIRCLE ( 'NONE', #49, 0.1600000000000000300 ) ;
+#17 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#18 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #134 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #270, #164, #24 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#19 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #42 ), #18 ) ;
+#20 = CYLINDRICAL_SURFACE ( 'NONE', #34, 0.2200000000000000000 ) ;
+#21 = FACE_OUTER_BOUND ( 'NONE', #222, .T. ) ;
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#23 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#24 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#26 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #267, #23, #184 ) ;
+#28 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#29 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #197 ), #272 ) ;
+#30 = FACE_OUTER_BOUND ( 'NONE', #265, .T. ) ;
+#31 = FACE_OUTER_BOUND ( 'NONE', #101, .T. ) ;
+#32 = EDGE_LOOP ( 'NONE', ( #159, #155, #202, #74 ) ) ;
+#33 = VERTEX_POINT ( 'NONE', #168 ) ;
+#34 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #129, #115 ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
+#36 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #42 ) ) ;
+#37 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#38 = EDGE_LOOP ( 'NONE', ( #3, #259, #240, #41 ) ) ;
+#39 = FACE_BOUND ( 'NONE', #162, .T. ) ;
+#40 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #210, #261 ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
+#42 = STYLED_ITEM ( 'NONE', ( #246 ), #219 ) ;
+#43 = VERTEX_POINT ( 'NONE', #154 ) ;
+#44 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#45 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ;
+#46 = FACE_OUTER_BOUND ( 'NONE', #225, .T. ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#49 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #91, #37 ) ;
+#50 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #94, .T. ) ;
+#52 = FILL_AREA_STYLE ('',( #271 ) ) ;
+#53 = VECTOR ( 'NONE', #96, 39.37007874015748100 ) ;
+#54 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #77, #22 ) ;
+#56 = FACE_OUTER_BOUND ( 'NONE', #217, .T. ) ;
+#57 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #163, #145 ) ;
+#58 = LINE ( 'NONE', #176, #78 ) ;
+#59 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #146 );
+#60 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #5, #266 ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;
+#62 = CIRCLE ( 'NONE', #60, 0.2000000000000000400 ) ;
+#63 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #157, #156 ) ;
+#64 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #239, #223 ) ;
+#65 = AXIS2_PLACEMENT_3D ( 'NONE', #260, #213, #178 ) ;
+#66 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #67, #44 ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#70 = AXIS2_PLACEMENT_3D ( 'NONE', #211, #195, #194 ) ;
+#71 = CIRCLE ( 'NONE', #57, 0.2200000000000000000 ) ;
+#72 = ADVANCED_FACE ( 'NONE', ( #21 ), #215, .T. ) ;
+#73 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #242, #224 ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #99, .F. ) ;
+#75 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #139, #262 ) ;
+#76 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #54, #50 ) ;
+#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#78 = VECTOR ( 'NONE', #15, 39.37007874015748100 ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294707200E-017, 0.05000000000000000300, -0.2000000000000000400 ) ) ;
+#81 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #221 );
+#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( 1.959434878635765700E-017, 0.05000000000000000300, 0.1600000000000000300 ) ) ;
+#84 = SURFACE_STYLE_USAGE ( .BOTH. , #203 ) ;
+#85 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #206, #153 ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, 0.0000000000000000000 ) ) ;
+#87 = CIRCLE ( 'NONE', #64, 0.1600000000000000300 ) ;
+#88 = AXIS2_PLACEMENT_3D ( 'NONE', #126, #123, #120 ) ;
+#89 = EDGE_CURVE ( 'NONE', #188, #208, #191, .T. ) ;
+#90 = VERTEX_POINT ( 'NONE', #132 ) ;
+#91 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = CIRCLE ( 'NONE', #63, 0.2200000000000000000 ) ;
+#93 = EDGE_CURVE ( 'NONE', #208, #90, #204, .T. ) ;
+#94 = EDGE_CURVE ( 'NONE', #207, #188, #173, .T. ) ;
+#95 = EDGE_CURVE ( 'NONE', #207, #90, #181, .T. ) ;
+#96 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#97 = EDGE_CURVE ( 'NONE', #43, #6, #161, .T. ) ;
+#98 = ADVANCED_FACE ( 'NONE', ( #151 ), #136, .T. ) ;
+#99 = EDGE_CURVE ( 'NONE', #90, #43, #117, .T. ) ;
+#100 = VECTOR ( 'NONE', #138, 39.37007874015748100 ) ;
+#101 = EDGE_LOOP ( 'NONE', ( #227, #68 ) ) ;
+#102 = EDGE_CURVE ( 'NONE', #33, #149, #128, .T. ) ;
+#103 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#104 = PLANE ( 'NONE',  #8 ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;
+#106 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #177, #232 ) ;
+#107 =( CONVERSION_BASED_UNIT ( 'INCH', #81 ) LENGTH_UNIT ( ) NAMED_UNIT ( #182 ) );
+#108 = EDGE_CURVE ( 'NONE', #33, #186, #141, .T. ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#110 = EDGE_CURVE ( 'NONE', #90, #208, #87, .T. ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ;
+#112 = LINE ( 'NONE', #83, #216 ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 2.694222958124177300E-017, 0.05000000000000000300, 0.2200000000000000000 ) ) ;
+#114 = AXIS2_PLACEMENT_3D ( 'NONE', #231, #150, #274 ) ;
+#115 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#116 = EDGE_CURVE ( 'NONE', #186, #14, #92, .T. ) ;
+#117 = LINE ( 'NONE', #140, #100 ) ;
+#118 = EDGE_CURVE ( 'NONE', #149, #14, #58, .T. ) ;
+#119 = SURFACE_SIDE_STYLE ('',( #174 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = SHAPE_DEFINITION_REPRESENTATION ( #183, #13 ) ;
+#123 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ;
+#125 =( CONVERSION_BASED_UNIT ( 'INCH', #205 ) LENGTH_UNIT ( ) NAMED_UNIT ( #214 ) );
+#126 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, 0.2000000000000000400 ) ) ;
+#127 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#128 = CIRCLE ( 'NONE', #66, 0.2200000000000000000 ) ;
+#129 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#130 = EDGE_CURVE ( 'NONE', #188, #207, #62, .T. ) ;
+#131 = EDGE_CURVE ( 'NONE', #149, #33, #71, .T. ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, -0.1600000000000000300 ) ) ;
+#133 = EDGE_CURVE ( 'NONE', #14, #186, #9, .T. ) ;
+#134 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #270, 'distance_accuracy_value', 'NONE');
+#135 = EDGE_CURVE ( 'NONE', #6, #43, #16, .T. ) ;
+#136 = TOROIDAL_SURFACE ( 'NONE', #65, 0.2000000000000000400, 0.04000000000000000100 ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ;
+#138 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#139 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, -0.1600000000000000300 ) ) ;
+#141 = LINE ( 'NONE', #113, #53 ) ;
+#142 = PLANE ( 'NONE',  #40 ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.2000000000000000400 ) ) ;
+#144 = PRESENTATION_STYLE_ASSIGNMENT (( #84 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#146 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#147 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#148 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#149 = VERTEX_POINT ( 'NONE', #229 ) ;
+#150 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#151 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ;
+#152 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #107, 'distance_accuracy_value', 'NONE');
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.1600000000000000300 ) ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ;
+#156 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
+#160 = ADVANCED_FACE ( 'NONE', ( #39, #30 ), #142, .T. ) ;
+#161 = CIRCLE ( 'NONE', #70, 0.1600000000000000300 ) ;
+#162 = EDGE_LOOP ( 'NONE', ( #137, #51 ) ) ;
+#163 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#164 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#165 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#166 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #187 ) ;
+#167 = CLOSED_SHELL ( 'NONE', ( #98, #196, #180, #160, #245, #263, #226, #72 ) ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 2.694222958124177300E-017, 0.05000000000000000300, 0.2200000000000000000 ) ) ;
+#169 = PRODUCT_CONTEXT ( 'NONE', #187, 'mechanical' ) ;
+#170 = CYLINDRICAL_SURFACE ( 'NONE', #11, 0.1600000000000000300 ) ;
+#171 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#173 = CIRCLE ( 'NONE', #75, 0.2000000000000000400 ) ;
+#174 = SURFACE_STYLE_FILL_AREA ( #230 ) ;
+#175 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #125, 'distance_accuracy_value', 'NONE');
+#176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, -0.2200000000000000000 ) ) ;
+#177 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #235, .NOT_KNOWN. ) ;
+#178 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #99, .T. ) ;
+#180 = ADVANCED_FACE ( 'NONE', ( #237 ), #20, .T. ) ;
+#181 = CIRCLE ( 'NONE', #73, 0.03999999999999998000 ) ;
+#182 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#183 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #106 ) ;
+#184 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
+#186 = VERTEX_POINT ( 'NONE', #248 ) ;
+#187 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#188 = VERTEX_POINT ( 'NONE', #143 ) ;
+#189 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #28 ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#191 = CIRCLE ( 'NONE', #88, 0.03999999999999998000 ) ;
+#192 = SURFACE_STYLE_FILL_AREA ( #52 ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
+#194 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#195 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#196 = ADVANCED_FACE ( 'NONE', ( #268 ), #10, .F. ) ;
+#197 = STYLED_ITEM ( 'NONE', ( #144 ), #13 ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#199 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#200 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#201 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #235 ) ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#203 = SURFACE_SIDE_STYLE ('',( #192 ) ) ;
+#204 = CIRCLE ( 'NONE', #76, 0.1600000000000000300 ) ;
+#205 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #233 );
+#206 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#207 = VERTEX_POINT ( 'NONE', #80 ) ;
+#208 = VERTEX_POINT ( 'NONE', #218 ) ;
+#209 = CYLINDRICAL_SURFACE ( 'NONE', #1, 0.2200000000000000000 ) ;
+#210 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
+#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#214 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#215 = TOROIDAL_SURFACE ( 'NONE', #85, 0.2000000000000000400, 0.04000000000000000100 ) ;
+#216 = VECTOR ( 'NONE', #220, 39.37007874015748100 ) ;
+#217 = EDGE_LOOP ( 'NONE', ( #45, #61, #179, #124 ) ) ;
+#218 = CARTESIAN_POINT ( 'NONE',  ( 1.959434878635765700E-017, 0.01000000000000000400, 0.1600000000000000300 ) ) ;
+#219 = MANIFOLD_SOLID_BREP ( 'Fillet1', #167 ) ;
+#220 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#221 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#222 = EDGE_LOOP ( 'NONE', ( #247, #12, #193, #212 ) ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#224 = DIRECTION ( 'NONE',  ( 1.224646799147353900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#225 = EDGE_LOOP ( 'NONE', ( #254, #35, #26, #105 ) ) ;
+#226 = ADVANCED_FACE ( 'NONE', ( #56 ), #170, .F. ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ;
+#228 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, -0.2200000000000000000 ) ) ;
+#230 = FILL_AREA_STYLE ('',( #264 ) ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#232 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #28, 'design' ) ;
+#233 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#234 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ;
+#235 = PRODUCT ( 'firingpinbushing', 'firingpinbushing', '', ( #169 ) ) ;
+#236 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#237 = FACE_OUTER_BOUND ( 'NONE', #38, .T. ) ;
+#238 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#239 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294707200E-017, 0.01000000000000000400, -0.2000000000000000400 ) ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #94, .F. ) ;
+#245 = ADVANCED_FACE ( 'NONE', ( #31, #2 ), #104, .F. ) ;
+#246 = PRESENTATION_STYLE_ASSIGNMENT (( #249 ) ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( 2.694222958124177300E-017, 0.0000000000000000000, 0.2200000000000000000 ) ) ;
+#249 = SURFACE_STYLE_USAGE ( .BOTH. , #119 ) ;
+#250 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( 1.959434878635765700E-017, 0.0000000000000000000, 0.1600000000000000300 ) ) ;
+#252 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#253 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #197 ) ) ;
+#254 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, 0.0000000000000000000 ) ) ;
+#256 = EDGE_LOOP ( 'NONE', ( #48, #234 ) ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.2200000000000000000 ) ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, 0.0000000000000000000 ) ) ;
+#259 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ;
+#260 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000000400, 0.0000000000000000000 ) ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#262 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#263 = ADVANCED_FACE ( 'NONE', ( #46 ), #209, .T. ) ;
+#264 = FILL_AREA_STYLE_COLOUR ( '', #228 ) ;
+#265 = EDGE_LOOP ( 'NONE', ( #185, #158 ) ) ;
+#266 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, 0.0000000000000000000 ) ) ;
+#268 = FACE_OUTER_BOUND ( 'NONE', #32, .T. ) ;
+#269 = EDGE_LOOP ( 'NONE', ( #244, #111, #275, #171 ) ) ;
+#270 =( CONVERSION_BASED_UNIT ( 'INCH', #59 ) LENGTH_UNIT ( ) NAMED_UNIT ( #17 ) );
+#271 = FILL_AREA_STYLE_COLOUR ( '', #238 ) ;
+#272 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #152 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #107, #236, #127 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#273 = EDGE_CURVE ( 'NONE', #208, #6, #112, .T. ) ;
+#274 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#275 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Grizzly_Handgun-Canadiangunnut/STEP/gripcap.step

@@ -0,0 +1,490 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('gripcap.STEP',
+    '2013-10-27T06:42:41',
+    ( 'Matt' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #336, .T. ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696763200, 0.0000000000000000000, -0.6735278097209633800 ) ) ;
+#4 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876595100, 0.0000000000000000000, -0.7758414495051702000 ) ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( 0.2690475683083726200, 0.2399999999999999900, 0.6589939664956555600 ) ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( 0.1269466190774760900, 0.2399999999999999900, -0.8239551359992114400 ) ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.2000000000000000100, 0.0000000000000000000 ) ) ;
+#8 = CARTESIAN_POINT ( 'NONE',  ( 0.2010978808478385600, 0.2399999999999999900, 0.7566076238766986700 ) ) ;
+#9 = VERTEX_POINT ( 'NONE', #276 ) ;
+#10 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( 0.1767583650280399600, 0.2399999999999999900, 0.7825972111623750200 ) ) ;
+#12 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158410000, -1.935268268465785000E-013, -0.8035566666470467200 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.1269466190774597700, 0.2399999999999999900, 0.8239551359992729500 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882581500, 0.0000000000000000000, 0.5494047677003721700 ) ) ;
+#15 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658189200, 0.0000000000000000000, -0.7108262172917664300 ) ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658464500, -1.935268268465785000E-013, 0.7108262172917926300 ) ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696715400, 0.0000000000000000000, 0.6735278097209734800 ) ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876664200, 0.0000000000000000000, -0.7758414495051843000 ) ) ;
+#19 = CARTESIAN_POINT ( 'NONE',  ( -0.1297402131735385900, 0.1999999999999999300, -0.8280192695799060100 ) ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217181900, 0.0000000000000000000, -0.8654068839384291300 ) ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( -0.2733277620519454200, 0.1999999999999999300, 0.6614162736999431600 ) ) ;
+#23 = SHAPE_DEFINITION_REPRESENTATION ( #404, #427 ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( 0.02596893207439347100, 0.1999999999999995100, 0.8694430878194191500 ) ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000001700, -1.234423022841641900E-015, -0.1170243263083960700 ) ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658258600, 0.0000000000000000000, 0.7108262172917100300 ) ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( 0.4214430878194191400, 0.1999999999999995100, 0.1154206757929221900 ) ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( -0.4050956665966860000, 0.2399999999999999900, 0.2301566560563282100 ) ) ;
+#29 = CARTESIAN_POINT ( 'NONE',  ( -3.846049839230823600E-018, 0.2000000000000000400, -0.8694430878194191500 ) ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000000600, 0.0000000000000000000, 0.1170243263083932400 ) ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859983900, 0.0000000000000000000, 0.2340026086564356300 ) ) ;
+#32 = ADVANCED_FACE ( 'NONE', ( #39 ), #257, .F. ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292140689100, 0.0000000000000000000, 0.4502353684123471800 ) ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ;
+#35 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( -0.2472451869969079500, 0.2399999999999999900, 0.6948000635768225600 ) ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658264700, 0.0000000000000000000, -0.7108262172917795300 ) ) ;
+#38 = CARTESIAN_POINT ( 'NONE',  ( 0.3612877107213658400, 0.2399999999999999900, 0.4421544464800368200 ) ) ;
+#39 = FACE_OUTER_BOUND ( 'NONE', #240, .T. ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.05068770332973046600, 0.2399999999999999900, -0.8595801612285828300 ) ) ;
+#41 = CARTESIAN_POINT ( 'NONE',  ( 0.1015049412097014900, 0.2399999999999999900, 0.8393184788508191200 ) ) ;
+#42 = FILL_AREA_STYLE ('',( #236 ) ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( 0.05068770332972833600, 0.2399999999999999900, 0.8595801612285837200 ) ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 1.493979371535143800E-017, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( 0.02532459214893315000, 0.2399999999999999900, 0.8645317053833029300 ) ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658389600, -1.935268268465785000E-013, -0.7108262172917794200 ) ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( -0.02532459214893324400, 0.2399999999999999900, 0.8645317053833029300 ) ) ;
+#48 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876588400, 0.0000000000000000000, 0.7758414495052417000 ) ) ;
+#49 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158241300, 0.0000000000000000000, -0.8035566666470297400 ) ) ;
+#50 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158467200, -1.935268268465785000E-013, 0.8035566666470902500 ) ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158438600, 0.0000000000000000000, 0.8035566666470742600 ) ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538360000, 0.0000000000000000000, -0.8483399374831509500 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( -0.2048337674878144800, 0.1999999999999999300, -0.7598132614813422100 ) ) ;
+#54 = ADVANCED_FACE ( 'NONE', ( #262 ), #114, .F. ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150616900E-018, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( -0.1269466190774760400, 0.2399999999999999900, 0.8239551359992113300 ) ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -0.2048337674878091800, 0.1999999999999999300, 0.7598132614813848400 ) ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171665763000, -1.234423022841641900E-015, 0.8882371974225168300 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292141653300, -1.234423022841641900E-015, -0.4502353684123446800 ) ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 0.4099783577948962800, 0.1999999999999995100, -0.2307976481564029100 ) ) ;
+#61 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#62 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882581500, 0.0000000000000000000, 0.5494047677003721700 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
+#64 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307696713200, 0.0000000000000000000, -0.6735278097209740400 ) ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = ORIENTED_EDGE ( 'NONE', *, *, #336, .F. ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( -0.2010978808478391100, 0.2399999999999999900, 0.7566076238766277200 ) ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882507100, 0.0000000000000000000, -0.5494047677003883700 ) ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 0.4165317053833029200, 0.2399999999999999900, 0.1150999456898279500 ) ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( -2.134256245050205600E-018, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#72 = SURFACE_STYLE_USAGE ( .BOTH. , #267 ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( -0.05068770332973228400, 0.2399999999999999900, 0.8595801612285299800 ) ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( -0.1015049412096987600, 0.2399999999999999900, 0.8393184788508723000 ) ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116882803500, -1.935268268465785000E-013, -0.5494047677003810500 ) ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( -0.1269466190774760400, 0.2399999999999999900, 0.8239551359992113300 ) ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538150500, 0.0000000000000000000, 0.8483399374831075400 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.4050956665966947700, 0.2399999999999999900, -0.2301566560563968700 ) ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217306400, -1.935268268465785000E-013, 0.8654068839385381500 ) ) ;
+#80 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #61 );
+#81 = CARTESIAN_POINT ( 'NONE',  ( 0.4165317053833029200, 0.2399999999999999900, -0.1150999456898307600 ) ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( -0.2733277620519055100, 0.1999999999999999300, -0.6614162736999426000 ) ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217185500, 0.0000000000000000000, 0.8654068839384638800 ) ) ;
+#84 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( -0.1297402131735352600, 0.1999999999999999300, 0.8280192695798606100 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538151300, -1.234423022841641900E-015, 0.8483399374831076500 ) ) ;
+#87 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696763700, -1.234423022841641900E-015, -0.6735278097209633800 ) ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171666711600, 0.0000000000000000000, 0.8882371974225128400 ) ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.1038607885950377000, 0.1999999999999995100, 0.8436665463654264800 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( -0.4165317053833029200, 0.2399999999999999900, 0.1150999456898291800 ) ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #332, .F. ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 0.3335307700247617800, 0.1999999999999995100, -0.5407402890958639100 ) ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( -0.2690475683083523000, 0.2399999999999999900, -0.6589939664957363800 ) ) ;
+#94 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#95 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1,
+ ( #269, #206 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 2, 2 ),
+ ( 0.0000000000000000000, 0.8333333333333333700 ),
+ .UNSPECIFIED. ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696715400, 0.0000000000000000000, 0.6735278097209734800 ) ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658258600, 0.0000000000000000000, 0.7108262172917100300 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( -0.3612877107214702600, 0.2399999999999999900, 0.4421544464800104500 ) ) ;
+#100 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #290 ) ;
+#101 = EDGE_LOOP ( 'NONE', ( #2, #65, #97, #91 ) ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -0.05068770332973075000, 0.2399999999999999900, -0.8595801612286201300 ) ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( 0.4050956665966947700, 0.2399999999999999900, -0.2301566560563968700 ) ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#105 =( CONVERSION_BASED_UNIT ( 'INCH', #259 ) LENGTH_UNIT ( ) NAMED_UNIT ( #383 ) );
+#106 = CARTESIAN_POINT ( 'NONE',  ( -0.1767583650280258600, 0.2399999999999999900, 0.7825972111624349700 ) ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063181542851800, -1.935268268465785000E-013, -0.8939999999999226300 ) ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( -0.2010978808478391100, 0.2399999999999999900, 0.7566076238766277200 ) ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137859161300, -1.935268268465785000E-013, -0.2340026086563770100 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( -0.2472451869969079500, 0.2399999999999999900, 0.6948000635768225600 ) ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063170169503000, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#112 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217181900, 0.0000000000000000000, -0.8654068839384291300 ) ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063170171767500, -1.935268268465785000E-013, 0.8940000000000200000 ) ) ;
+#114 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( 
+ ( #178, #183, #139, #112, #52, #49, #18, #15, #64, #158, #288, #160, #391, #400, #397, #396, #394, #393, #392, #229, #228, #197, #195, #166, #164, #162, #161, #157, #156, #130, #126, #98, #96, #62, #33, #31, #30, #401, #398, #232, #69, #3, #37, #4, #200, #367, #334, #291, #263, #199 ),
+ ( #167, #131, #102, #390, #192, #360, #424, #125, #93, #284, #225, #190, #155, #90, #28, #99, #261, #128, #36, #68, #338, #56, #418, #149, #419, #198, #333, #132, #368, #168, #402, #201, #5, #233, #38, #264, #70, #294, #103, #335, #133, #369, #169, #403, #202, #6, #234, #40, #265, #71 ) ),
+ .UNSPECIFIED., .F., .T., .F.,
+ ( 2, 2 ),
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 1.000000000000000000 ),
+ ( 0.0000000000000000000, 0.1963495408493620700, 0.3926990816987241400, 0.5890486225480862100, 0.7853981633974482800, 1.178097245096172400, 1.570796326794896600, 1.963495408493620700, 2.356194490192344800, 2.552544031041707100, 2.748893571891069000, 2.945243112740430800, 3.141592653589793100, 3.337942194439155400, 3.534291735288517300, 3.730641276137879100, 3.926990816987241400, 4.319689898685965100, 4.712388980384689700, 5.105088062083414300, 5.497787143782138000, 5.694136684631500200, 5.890486225480861600, 6.086835766330223900, 6.283185307179586200 ),
+ .UNSPECIFIED. ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 0.4165317053833029200, 0.2399999999999999900, 0.1150999456898279500 ) ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( -0.3660245471369212900, 0.1999999999999999300, -0.4435012668021557900 ) ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( -0.05196984306088820600, 0.1999999999999999300, 0.8643563339275183200 ) ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876589300, -1.234423022841641900E-015, 0.7758414495052418100 ) ) ;
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #332, .T. ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876596200, -1.234423022841641900E-015, -0.7758414495051704200 ) ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063170169514100, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#122 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #395 );
+#123 = CARTESIAN_POINT ( 'NONE',  ( 0.1802395438593406600, 0.1999999999999995100, 0.7860904537431583300 ) ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.2513802303583944600, 0.1999999999999995100, -0.6974710891959820000 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( -0.2472451869969025900, 0.2399999999999999900, -0.6948000635768767400 ) ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876588400, 0.0000000000000000000, 0.7758414495052417000 ) ) ;
+#127 = FILL_AREA_STYLE ('',( #328 ) ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( -0.2690475683083922700, 0.2399999999999999900, 0.6589939664957369400 ) ) ;
+#129 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158438600, 0.0000000000000000000, 0.8035566666470742600 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( -0.02532459211122636100, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.1015049412097014900, 0.2399999999999999900, 0.8393184788508191200 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.3289066416920638500, 0.2399999999999999900, -0.5390073933749589500 ) ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( -0.2690475683083922700, 0.2399999999999999900, 0.6589939664957369400 ) ) ;
+#135 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#136 = CARTESIAN_POINT ( 'NONE',  ( -0.3289066416920198900, 0.2399999999999999900, 0.5390073933748049700 ) ) ;
+#137 = CARTESIAN_POINT ( 'NONE',  ( -0.3612877107214702600, 0.2399999999999999900, 0.4421544464800104500 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171666778900, 0.0000000000000000000, 0.8882371974224589900 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171666821900, 0.0000000000000000000, -0.8882371974225471400 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000238800, -1.935268268465785000E-013, 0.1170243263083959900 ) ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( -0.4050956665966860000, 0.2399999999999999900, 0.2301566560563282100 ) ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( -5.122214988120493500E-017, 0.2000000000000000100, 0.8694430878194191500 ) ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217192400, 0.0000000000000000000, 0.8654068839385169500 ) ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 0.2690475683083726200, 0.2399999999999999900, 0.6589939664956555600 ) ) ;
+#145 = SURFACE_STYLE_FILL_AREA ( #127 ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( -0.4214430878194191400, 0.1999999999999999300, -0.1154206757929234800 ) ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538314200, 0.0000000000000000000, 0.8483399374831066500 ) ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( -5.122214988120493500E-017, 0.2000000000000000100, 0.8694430878194191500 ) ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( -0.05068770332973228400, 0.2399999999999999900, 0.8595801612285299800 ) ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696716500, -1.234423022841641900E-015, 0.6735278097209734800 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538315100, -1.234423022841641900E-015, -0.8483399374831067700 ) ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( 0.2513802303583938500, 0.1999999999999995100, 0.6974710891959123900 ) ) ;
+#153 = VERTEX_POINT ( 'NONE', #337 ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.1802395438593265800, 0.1999999999999995100, -0.7860904537432080700 ) ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( -0.4165317053833029200, 0.2399999999999999900, -0.1150999456898292700 ) ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538150500, 0.0000000000000000000, 0.8483399374831075400 ) ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217185500, 0.0000000000000000000, 0.8654068839384638800 ) ) ;
+#158 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116882579800, 0.0000000000000000000, -0.5494047677003725000 ) ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #363, .F. ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137858924800, 0.0000000000000000000, -0.2340026086563739000 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171666711600, 0.0000000000000000000, 0.8882371974225128400 ) ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063170169503000, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#163 = SURFACE_STYLE_USAGE ( .BOTH. , #364 ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063170169514100, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#165 = CLOSED_SHELL ( 'NONE', ( #54, #32, #258, #184 ) ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171666778900, 0.0000000000000000000, 0.8882371974224589900 ) ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( -2.134256245050205600E-018, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.1767583650280399600, 0.2399999999999999900, 0.7825972111623750200 ) ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 0.2472451869969080100, 0.2399999999999999900, -0.6948000635768224500 ) ) ;
+#170 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( -0.4165317053833029200, 0.2399999999999999900, 0.1150999456898291800 ) ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( 1.493979371535143800E-017, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#173 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #129, 'design' ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( -0.4165317053833029200, 0.2399999999999999900, -0.1150999456898292700 ) ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171667442200, -1.935268268465785000E-013, -0.8882371974225703500 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( -0.4050956665966861700, 0.2399999999999999900, -0.2301566560562318700 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158298400, 0.0000000000000000000, 0.8035566666470732600 ) ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150616900E-018, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141983000, -1.935268268465785000E-013, 0.4502353684123175400 ) ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( -0.3612877107214704200, 0.2399999999999999900, -0.4421544464801057700 ) ) ;
+#181 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171666821900, 0.0000000000000000000, -0.8882371974225471400 ) ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876594200, 0.0000000000000000000, 0.7758414495051705300 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063181542539500, 0.0000000000000000000, -0.8939999999998988800 ) ) ;
+#184 = ADVANCED_FACE ( 'NONE', ( #426 ), #295, .F. ) ;
+#185 = VERTEX_POINT ( 'NONE', #370 ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -0.4099783577948871200, 0.1999999999999999300, 0.2307976481563518700 ) ) ;
+#187 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292140690700, -1.234423022841641900E-015, 0.4502353684123472400 ) ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171666644300, -1.234423022841641900E-015, -0.8882371974225052900 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.3335307700247600600, 0.1999999999999995100, 0.5407402890958656900 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( -0.4050956665966861700, 0.2399999999999999900, -0.2301566560562318700 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 0.1038607885950377900, 0.1999999999999995100, -0.8436665463654278200 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( -0.1269466190774791200, 0.2399999999999999900, -0.8239551359992569600 ) ) ;
+#193 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1,
+ ( #373, #142 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 2, 2 ),
+ ( 0.0000000000000000000, 0.8333333333333333700 ),
+ .UNSPECIFIED. ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #363, .T. ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217192400, 0.0000000000000000000, 0.8654068839385169500 ) ) ;
+#196 =( CONVERSION_BASED_UNIT ( 'INCH', #122 ) LENGTH_UNIT ( ) NAMED_UNIT ( #35 ) );
+#197 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538314200, 0.0000000000000000000, 0.8483399374831066500 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.02532459214893315000, 0.2399999999999999900, 0.8645317053833029300 ) ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150616900E-018, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158298700, 0.0000000000000000000, -0.8035566666470732600 ) ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 0.2472451869969074000, 0.2399999999999999900, 0.6948000635767528400 ) ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( 0.1767583650280258600, 0.2399999999999999900, -0.7825972111624349700 ) ) ;
+#203 = PLANE ( 'NONE',  #316 ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( -0.3289066416921002700, 0.2399999999999999900, -0.5390073933748044100 ) ) ;
+#205 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #165 ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( -3.846049839230823600E-018, 0.2000000000000000400, -0.8694430878194191500 ) ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( -0.2690475683083523000, 0.2399999999999999900, -0.6589939664957363800 ) ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538495200, -1.935268268465785000E-013, -0.8483399374831708300 ) ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( -0.2472451869969025900, 0.2399999999999999900, -0.6948000635768767400 ) ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658264100, 0.0000000000000000000, 0.7108262172917796400 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( -2.134256245050205600E-018, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307697319900, -1.935268268465785000E-013, 0.6735278097209865800 ) ) ;
+#213 = CARTESIAN_POINT ( 'NONE',  ( -0.2010978808478440500, 0.2399999999999999900, -0.7566076238765737600 ) ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307697112300, 0.0000000000000000000, 0.6735278097209747000 ) ) ;
+#215 = CARTESIAN_POINT ( 'NONE',  ( 0.3612877107213658400, 0.2399999999999999900, 0.4421544464800368200 ) ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( -0.1038607885950361500, 0.1999999999999999300, -0.8436665463653901800 ) ) ;
+#217 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #286, 'distance_accuracy_value', 'NONE');
+#218 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116881776000, 0.0000000000000000000, 0.5494047677003730500 ) ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -0.3335307700247128200, 0.1999999999999999300, 0.5407402890957330200 ) ) ;
+#220 = EDGE_LOOP ( 'NONE', ( #84, #194 ) ) ;
+#221 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000001700, -1.234423022841641900E-015, 0.1170243263083932400 ) ) ;
+#222 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #105, 'distance_accuracy_value', 'NONE');
+#223 = CARTESIAN_POINT ( 'NONE',  ( 1.493979371535143800E-017, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( 0.4099783577949915300, 0.1999999999999995100, 0.2307976481563255900 ) ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( -0.3612877107214704200, 0.2399999999999999900, -0.4421544464801057700 ) ) ;
+#226 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #300, #342, #414, #216, #19, #248, #53, #278, #82, #311, #116, #351, #146, #381, #186, #417, #219, #22, #250, #57, #280, #85, #313, #117, #353, #148 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.05322661093010803300, 0.05653916235008481200, 0.05985171377006158500, 0.06316426519003835700, 0.06647681661001514400, 0.07310191944996868900, 0.07972702228992224700, 0.08635212512987580600, 0.09297722796982935100, 0.09628977938980612400, 0.09960233080978289600, 0.1029148822297596700, 0.1062274336497364600 ),
+ .UNSPECIFIED. ) ;
+#227 = CARTESIAN_POINT ( 'NONE',  ( 0.02596893206192623900, 0.1999999999999995100, -0.8694430878194360200 ) ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158298400, 0.0000000000000000000, 0.8035566666470732600 ) ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876594200, 0.0000000000000000000, 0.7758414495051705300 ) ) ;
+#230 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#231 = PRODUCT ( 'gripcap', 'gripcap', '', ( #329 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292141652200, 0.0000000000000000000, -0.4502353684123446300 ) ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 0.3289066416920604100, 0.2399999999999999900, 0.5390073933749643900 ) ) ;
+#234 = CARTESIAN_POINT ( 'NONE',  ( 0.1015049412097010800, 0.2399999999999999900, -0.8393184788508191200 ) ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -0.1767583650280217200, 0.2399999999999999900, -0.7825972111623902300 ) ) ;
+#236 = FILL_AREA_STYLE_COLOUR ( '', #361 ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( -0.1269466190774791200, 0.2399999999999999900, -0.8239551359992569600 ) ) ;
+#238 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( -0.1015049412096997400, 0.2399999999999999900, -0.8393184788507823700 ) ) ;
+#240 = EDGE_LOOP ( 'NONE', ( #63, #20, #119, #159 ) ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876845200, -1.935268268465785000E-013, -0.7758414495051998400 ) ) ;
+#242 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859983900, 0.0000000000000000000, 0.2340026086564356300 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141753800, 0.0000000000000000000, 0.4502353684123108800 ) ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.4050956665967900800, 0.2399999999999999900, 0.2301566560563035900 ) ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876775200, -1.935268268465785000E-013, 0.7758414495051860800 ) ) ;
+#246 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137858923100, 0.0000000000000000000, 0.2340026086564703000 ) ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 0.02532459211122639300, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( -0.1802395438593220900, 0.1999999999999999300, -0.7860904537431633300 ) ) ;
+#249 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000000600, 0.0000000000000000000, 0.1170243263083944300 ) ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( -0.2513802303583943500, 0.1999999999999999300, 0.6974710891959821100 ) ) ;
+#251 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#252 = EDGE_LOOP ( 'NONE', ( #67, #34 ) ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( -5.122214988120493500E-017, 0.2000000000000000100, 0.8694430878194191500 ) ) ;
+#254 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859032500, -1.234423022841641900E-015, -0.2340026086564331000 ) ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( 0.4214430878194191400, 0.1999999999999995100, -0.1154206757929249900 ) ) ;
+#256 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#257 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( 
+ ( #55, #416, #181, #21, #309, #382, #375, #357, #346, #312, #305, #279, #273, #249, #246, #243, #218, #214, #210, #182, #177, #147, #143, #138, #121, #111, #88, #83, #77, #51, #48, #26, #17, #14, #378, #242, #412, #409, #407, #406, #374, #372, #371, #345, #343, #341, #304, #301, #298, #272 ),
+ ( #270, #268, #266, #239, #237, #235, #213, #209, #207, #204, #180, #176, #174, #171, #141, #137, #136, #134, #110, #108, #106, #76, #74, #73, #47, #45, #43, #41, #13, #11, #8, #347, #144, #310, #215, #244, #115, #81, #78, #413, #410, #380, #379, #376, #350, #306, #277, #274, #247, #211 ) ),
+ .UNSPECIFIED., .F., .T., .F.,
+ ( 2, 2 ),
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 1.000000000000000000 ),
+ ( 0.0000000000000000000, 0.1963495408493620700, 0.3926990816987241400, 0.5890486225480862100, 0.7853981633974482800, 1.178097245096172400, 1.570796326794896600, 1.963495408493620700, 2.356194490192344800, 2.552544031041707100, 2.748893571891069000, 2.945243112740430800, 3.141592653589793100, 3.337942194439155400, 3.534291735288517300, 3.730641276137879100, 3.926990816987241400, 4.319689898685965100, 4.712388980384689700, 5.105088062083414300, 5.497787143782138000, 5.694136684631500200, 5.890486225480861600, 6.086835766330223900, 6.283185307179586200 ),
+ .UNSPECIFIED. ) ;
+#258 = ADVANCED_FACE ( 'NONE', ( #399 ), #203, .T. ) ;
+#259 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #297 );
+#260 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( -0.3289066416920198900, 0.2399999999999999900, 0.5390073933748049700 ) ) ;
+#262 = FACE_OUTER_BOUND ( 'NONE', #101, .T. ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063181542542700, 0.0000000000000000000, -0.8940000000001012700 ) ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( 0.4050956665967900800, 0.2399999999999999900, 0.2301566560563035900 ) ) ;
+#265 = CARTESIAN_POINT ( 'NONE',  ( 0.02532459211122639300, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#266 = CARTESIAN_POINT ( 'NONE',  ( -0.05068770332973075000, 0.2399999999999999900, -0.8595801612286201300 ) ) ;
+#267 = SURFACE_SIDE_STYLE ('',( #330 ) ) ;
+#268 = CARTESIAN_POINT ( 'NONE',  ( -0.02532459211122636100, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( 1.493979371535143800E-017, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( -2.134256245050205600E-018, 0.2399999999999999900, -0.8645317053833029300 ) ) ;
+#271 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307696920800, -1.935268268465785000E-013, -0.6735278097209859100 ) ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150616900E-018, 0.0000000000000000000, -0.8940000000000001300 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000000600, 0.0000000000000000000, -0.1170243263083945300 ) ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( 0.05068770332973046600, 0.2399999999999999900, -0.8595801612285828300 ) ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538449700, -1.935268268465785000E-013, 0.8483399374831264200 ) ) ;
+#276 = CARTESIAN_POINT ( 'NONE',  ( -5.122214988120493500E-017, 0.2000000000000000100, 0.8694430878194191500 ) ) ;
+#277 = CARTESIAN_POINT ( 'NONE',  ( 0.1015049412097010800, 0.2399999999999999900, -0.8393184788508191200 ) ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( -0.2513802303583886300, 0.1999999999999999300, -0.6974710891960249600 ) ) ;
+#279 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137858924800, 0.0000000000000000000, -0.2340026086563739000 ) ) ;
+#280 = CARTESIAN_POINT ( 'NONE',  ( -0.1802395438593265000, 0.1999999999999999300, 0.7860904537432080700 ) ) ;
+#281 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217186200, -1.234423022841641900E-015, 0.8654068839384638800 ) ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882508700, -1.234423022841641900E-015, -0.5494047677003883700 ) ) ;
+#283 = CARTESIAN_POINT ( 'NONE',  ( 0.05196984306088482000, 0.1999999999999995100, 0.8643563339275719400 ) ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( -0.3289066416921002700, 0.2399999999999999900, -0.5390073933748044100 ) ) ;
+#285 = CARTESIAN_POINT ( 'NONE',  ( 0.3660245471369126800, 0.1999999999999995100, -0.4435012668020063000 ) ) ;
+#286 =( CONVERSION_BASED_UNIT ( 'INCH', #80 ) LENGTH_UNIT ( ) NAMED_UNIT ( #251 ) );
+#287 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #231 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141755400, 0.0000000000000000000, -0.4502353684124060200 ) ) ;
+#289 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #231, .NOT_KNOWN. ) ;
+#290 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#291 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171666640800, 0.0000000000000000000, -0.8882371974225051800 ) ) ;
+#292 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #289, #173 ) ;
+#293 = AXIS2_PLACEMENT_3D ( 'NONE', #256, #260, #66 ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 0.4165317053833029200, 0.2399999999999999900, -0.1150999456898307600 ) ) ;
+#295 = PLANE ( 'NONE',  #325 ) ;
+#296 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #354 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #196, #1, #230 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#297 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#298 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063181542542700, 0.0000000000000000000, -0.8940000000001012700 ) ) ;
+#299 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #307 ), #296 ) ;
+#300 = CARTESIAN_POINT ( 'NONE',  ( -3.846049839230823600E-018, 0.2000000000000000400, -0.8694430878194191500 ) ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( 0.05838054171666640800, 0.0000000000000000000, -0.8882371974225051800 ) ) ;
+#302 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141984700, -1.935268268465785000E-013, -0.4502353684124126800 ) ) ;
+#303 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #307 ) ) ;
+#304 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217212000, 0.0000000000000000000, -0.8654068839384705400 ) ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141755400, 0.0000000000000000000, -0.4502353684124060200 ) ) ;
+#306 = CARTESIAN_POINT ( 'NONE',  ( 0.1269466190774760900, 0.2399999999999999900, -0.8239551359992114400 ) ) ;
+#307 = STYLED_ITEM ( 'NONE', ( #387 ), #427 ) ;
+#308 = CARTESIAN_POINT ( 'NONE',  ( -0.05838054171668350500, -1.935268268465785000E-013, 0.8882371974224784200 ) ) ;
+#309 = CARTESIAN_POINT ( 'NONE',  ( -0.1437081836538360000, 0.0000000000000000000, -0.8483399374831509500 ) ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( 0.3289066416920604100, 0.2399999999999999900, 0.5390073933749643900 ) ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( -0.3335307700247932500, 0.1999999999999999300, -0.5407402890957324600 ) ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116882579800, 0.0000000000000000000, -0.5494047677003725000 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( -0.1038607885950355000, 0.1999999999999999300, 0.8436665463654797700 ) ) ;
+#314 = VERTEX_POINT ( 'NONE', #172 ) ;
+#315 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158439700, -1.234423022841641900E-015, 0.8035566666470743700 ) ) ;
+#316 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #10, #238 ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658266400, -1.234423022841641900E-015, -0.7108262172917796400 ) ) ;
+#318 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #217 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #286, #94, #321 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.1297402131735190300, 0.1999999999999995100, 0.8280192695799121200 ) ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 0.2733277620519226100, 0.1999999999999995100, -0.6614162736998744400 ) ) ;
+#321 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#322 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #222 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #105, #339, #135 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#323 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #327 ), #322 ) ;
+#324 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #327 ) ) ;
+#325 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #170, #405 ) ;
+#326 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #253, #24, #283, #89, #319, #123, #358, #152, #388, #189, #423, #224, #27, #255, #60, #285, #92, #320, #124, #359, #154, #389, #191, #425, #227, #29 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 0.003326663183131755500, 0.006653326366263505000, 0.009979989549395251400, 0.01330665273252701000, 0.01995997909879050300, 0.02661330546505402000, 0.03326663183131752700, 0.03991995819758102600, 0.04324662138071278000, 0.04657328456384451900, 0.04989994774697627300, 0.05322661093010804000 ),
+ .UNSPECIFIED. ) ;
+#327 = STYLED_ITEM ( 'NONE', ( #348 ), #205 ) ;
+#328 = FILL_AREA_STYLE_COLOUR ( '', #415 ) ;
+#329 = PRODUCT_CONTEXT ( 'NONE', #290, 'mechanical' ) ;
+#330 = SURFACE_STYLE_FILL_AREA ( #42 ) ;
+#331 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #44, #107, #175, #408, #208, #12, #241, #46, #271, #75, #302, #109, #344, #140, #377, #179, #411, #212, #16, #245, #50, #275, #79, #308, #113, #349 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.05519227271824145300, 0.05862808641730610200, 0.06206390011637075200, 0.06549971381543540100, 0.06893552751450005000, 0.07580715491262934900, 0.08267878231075864700, 0.08955040970888794600, 0.09642203710701724400, 0.09985785080608189400, 0.1032936645051465300, 0.1067294782042111800, 0.1101652919032758300 ),
+ .UNSPECIFIED. ) ;
+#332 = EDGE_CURVE ( 'NONE', #314, #185, #95, .T. ) ;
+#333 = CARTESIAN_POINT ( 'NONE',  ( 0.05068770332972833600, 0.2399999999999999900, 0.8595801612285837200 ) ) ;
+#334 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217212000, 0.0000000000000000000, -0.8654068839384705400 ) ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.3612877107214621000, 0.2399999999999999900, -0.4421544464799386200 ) ) ;
+#336 = EDGE_CURVE ( 'NONE', #314, #153, #331, .T. ) ;
+#337 = CARTESIAN_POINT ( 'NONE',  ( -5.549066237130535000E-017, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( -0.1767583650280258600, 0.2399999999999999900, 0.7825972111624349700 ) ) ;
+#339 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#340 = EDGE_CURVE ( 'NONE', #185, #9, #226, .T. ) ;
+#341 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538314200, 0.0000000000000000000, -0.8483399374831066500 ) ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( -0.02596893206192620400, 0.1999999999999999300, -0.8694430878194022700 ) ) ;
+#343 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158298700, 0.0000000000000000000, -0.8035566666470732600 ) ) ;
+#344 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000238800, -1.935268268465785000E-013, -0.1170243263083960800 ) ) ;
+#345 = CARTESIAN_POINT ( 'NONE',  ( 0.2235132006876595100, 0.0000000000000000000, -0.7758414495051702000 ) ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307696713200, 0.0000000000000000000, -0.6735278097209740400 ) ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( 0.2472451869969074000, 0.2399999999999999900, 0.6948000635767528400 ) ) ;
+#348 = PRESENTATION_STYLE_ASSIGNMENT (( #72 ) ) ;
+#349 = CARTESIAN_POINT ( 'NONE',  ( -5.549066237130535000E-017, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#350 = CARTESIAN_POINT ( 'NONE',  ( 0.1767583650280258600, 0.2399999999999999900, -0.7825972111624349700 ) ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( -0.4099783577948872300, 0.1999999999999999300, -0.2307976481562555300 ) ) ;
+#352 = EDGE_CURVE ( 'NONE', #153, #9, #193, .T. ) ;
+#353 = CARTESIAN_POINT ( 'NONE',  ( -0.02596893207439356400, 0.1999999999999999300, 0.8694430878194190400 ) ) ;
+#354 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #196, 'distance_accuracy_value', 'NONE');
+#355 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658259700, -1.234423022841641900E-015, 0.7108262172917101400 ) ) ;
+#356 = CARTESIAN_POINT ( 'NONE',  ( 0.1976454380158299800, -1.234423022841641900E-015, -0.8035566666470734800 ) ) ;
+#357 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658189200, 0.0000000000000000000, -0.7108262172917664300 ) ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( 0.2048337674878086500, 0.1999999999999995100, 0.7598132614814558900 ) ) ;
+#359 = CARTESIAN_POINT ( 'NONE',  ( 0.2048337674878093200, 0.1999999999999995100, -0.7598132614813846200 ) ) ;
+#360 = CARTESIAN_POINT ( 'NONE',  ( -0.1767583650280217200, 0.2399999999999999900, -0.7825972111623902300 ) ) ;
+#361 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#362 = EDGE_CURVE ( 'NONE', #153, #314, #365, .T. ) ;
+#363 = EDGE_CURVE ( 'NONE', #9, #185, #326, .T. ) ;
+#364 = SURFACE_SIDE_STYLE ('',( #145 ) ) ;
+#365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #384, #420, #58, #281, #86, #315, #118, #355, #150, #385, #187, #421, #221, #25, #254, #59, #282, #87, #317, #120, #356, #151, #386, #188, #422, #223 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 0.003449517044890094700, 0.006899034089780181600, 0.01034855113467026700, 0.01379806817956036300, 0.02069710226934053400, 0.02759613635912072600, 0.03449517044890091500, 0.04139420453868109000, 0.04484372158357118700, 0.04829323862846125700, 0.05174275567335136200, 0.05519227271824145300 ),
+ .UNSPECIFIED. ) ;
+#366 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #129 ) ;
+#367 = CARTESIAN_POINT ( 'NONE',  ( 0.1437081836538314200, 0.0000000000000000000, -0.8483399374831066500 ) ) ;
+#368 = CARTESIAN_POINT ( 'NONE',  ( 0.1269466190774597700, 0.2399999999999999900, 0.8239551359992729500 ) ) ;
+#369 = CARTESIAN_POINT ( 'NONE',  ( 0.2690475683083718400, 0.2399999999999999900, -0.6589939664956565600 ) ) ;
+#370 = CARTESIAN_POINT ( 'NONE',  ( -3.846049839230823600E-018, 0.2000000000000000400, -0.8694430878194191500 ) ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.2720554471658264700, 0.0000000000000000000, -0.7108262172917795300 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( 0.2947287307696763200, 0.0000000000000000000, -0.6735278097209633800 ) ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( -5.549066237130535000E-017, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882507100, 0.0000000000000000000, -0.5494047677003883700 ) ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( -0.2235132006876664200, 0.0000000000000000000, -0.7758414495051843000 ) ) ;
+#376 = CARTESIAN_POINT ( 'NONE',  ( 0.2010978808478392200, 0.2399999999999999900, -0.7566076238766273900 ) ) ;
+#377 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137859159600, -1.935268268465785000E-013, 0.2340026086564734000 ) ) ;
+#378 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292140689100, 0.0000000000000000000, 0.4502353684123471800 ) ) ;
+#379 = CARTESIAN_POINT ( 'NONE',  ( 0.2472451869969080100, 0.2399999999999999900, -0.6948000635768224500 ) ) ;
+#380 = CARTESIAN_POINT ( 'NONE',  ( 0.2690475683083718400, 0.2399999999999999900, -0.6589939664956565600 ) ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( -0.4214430878194191400, 0.1999999999999999300, 0.1154206757929233800 ) ) ;
+#382 = CARTESIAN_POINT ( 'NONE',  ( -0.1976454380158241300, 0.0000000000000000000, -0.8035566666470297400 ) ) ;
+#383 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( -5.549066237130535000E-017, 0.0000000000000000000, 0.8940000000000001300 ) ) ;
+#385 = CARTESIAN_POINT ( 'NONE',  ( 0.3566514116882583100, -1.234423022841641900E-015, 0.5494047677003721700 ) ) ;
+#386 = CARTESIAN_POINT ( 'NONE',  ( 0.1156400255217212700, -1.234423022841641900E-015, -0.8654068839384705400 ) ) ;
+#387 = PRESENTATION_STYLE_ASSIGNMENT (( #163 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 0.2733277620519225000, 0.1999999999999995100, 0.6614162736998753200 ) ) ;
+#389 = CARTESIAN_POINT ( 'NONE',  ( 0.1297402131735353500, 0.1999999999999995100, -0.8280192695798606100 ) ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( -0.1015049412096997400, 0.2399999999999999900, -0.8393184788507823700 ) ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000000600, 0.0000000000000000000, -0.1170243263083945300 ) ) ;
+#392 = CARTESIAN_POINT ( 'NONE',  ( -0.2720554471658264100, 0.0000000000000000000, 0.7108262172917796400 ) ) ;
+#393 = CARTESIAN_POINT ( 'NONE',  ( -0.2947287307697112300, 0.0000000000000000000, 0.6735278097209747000 ) ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116881776000, 0.0000000000000000000, 0.5494047677003730500 ) ) ;
+#395 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#396 = CARTESIAN_POINT ( 'NONE',  ( -0.3897087292141753800, 0.0000000000000000000, 0.4502353684123108800 ) ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( -0.4343918137858923100, 0.0000000000000000000, 0.2340026086564703000 ) ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859031900, 0.0000000000000000000, -0.2340026086564331000 ) ) ;
+#399 = FACE_OUTER_BOUND ( 'NONE', #220, .T. ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( -0.4460000000000000600, 0.0000000000000000000, 0.1170243263083944300 ) ) ;
+#401 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000000600, 0.0000000000000000000, -0.1170243263083960700 ) ) ;
+#402 = CARTESIAN_POINT ( 'NONE',  ( 0.2010978808478385600, 0.2399999999999999900, 0.7566076238766986700 ) ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( 0.2010978808478392200, 0.2399999999999999900, -0.7566076238766273900 ) ) ;
+#404 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #292 ) ;
+#405 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 0.3897087292141652200, 0.0000000000000000000, -0.4502353684123446300 ) ) ;
+#407 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859031900, 0.0000000000000000000, -0.2340026086564331000 ) ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( -0.1156400255217296000, -1.935268268465785000E-013, -0.8654068839384503300 ) ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000000600, 0.0000000000000000000, -0.1170243263083960700 ) ) ;
+#410 = CARTESIAN_POINT ( 'NONE',  ( 0.3289066416920638500, 0.2399999999999999900, -0.5390073933749589500 ) ) ;
+#411 = CARTESIAN_POINT ( 'NONE',  ( -0.3566514116881999700, -1.935268268465785000E-013, 0.5494047677003816000 ) ) ;
+#412 = CARTESIAN_POINT ( 'NONE',  ( 0.4460000000000000600, 0.0000000000000000000, 0.1170243263083932400 ) ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( 0.3612877107214621000, 0.2399999999999999900, -0.4421544464799386200 ) ) ;
+#414 = CARTESIAN_POINT ( 'NONE',  ( -0.05196984306088699200, 0.1999999999999999300, -0.8643563339276080200 ) ) ;
+#415 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#416 = CARTESIAN_POINT ( 'NONE',  ( -0.02919063181542539500, 0.0000000000000000000, -0.8939999999998988800 ) ) ;
+#417 = CARTESIAN_POINT ( 'NONE',  ( -0.3660245471369211200, 0.1999999999999999300, 0.4435012668020604800 ) ) ;
+#418 = CARTESIAN_POINT ( 'NONE',  ( -0.1015049412096987600, 0.2399999999999999900, 0.8393184788508723000 ) ) ;
+#419 = CARTESIAN_POINT ( 'NONE',  ( -0.02532459214893324400, 0.2399999999999999900, 0.8645317053833029300 ) ) ;
+#420 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063170167563200, -1.234423022841641900E-015, 0.8940000000000039000 ) ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( 0.4343918137859984500, -1.234423022841641900E-015, 0.2340026086564356300 ) ) ;
+#422 = CARTESIAN_POINT ( 'NONE',  ( 0.02919063181542544400, -1.234423022841641900E-015, -0.8940000000001012700 ) ) ;
+#423 = CARTESIAN_POINT ( 'NONE',  ( 0.3660245471368164200, 0.1999999999999995100, 0.4435012668020885700 ) ) ;
+#424 = CARTESIAN_POINT ( 'NONE',  ( -0.2010978808478440500, 0.2399999999999999900, -0.7566076238765737600 ) ) ;
+#425 = CARTESIAN_POINT ( 'NONE',  ( 0.05196984306088647100, 0.1999999999999995100, -0.8643563339275700500 ) ) ;
+#426 = FACE_OUTER_BOUND ( 'NONE', #252, .T. ) ;
+#427 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'gripcap', ( #205, #293 ), #318 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Grizzly_Handgun-Canadiangunnut/STEP/hammertriggerpinX2.step

@@ -0,0 +1,266 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('hammertriggerpinX2.STEP',
+    '2013-10-27T06:42:23',
+    ( 'Matt' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
+#3 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = LINE ( 'NONE', #116, #150 ) ;
+#5 = CYLINDRICAL_SURFACE ( 'NONE', #173, 0.06250000000000000000 ) ;
+#6 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#9 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#10 = CLOSED_SHELL ( 'NONE', ( #206, #47, #118, #232, #132, #99, #64, #32 ) ) ;
+#11 = CIRCLE ( 'NONE', #142, 0.06250000000000000000 ) ;
+#12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#13 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #240, .T. ) ;
+#15 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#17 = FACE_OUTER_BOUND ( 'NONE', #185, .T. ) ;
+#18 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#20 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ;
+#22 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#23 = PRODUCT ( 'hammertriggerpinX2', 'hammertriggerpinX2', '', ( #70 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 1.230000000000000000, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#26 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#27 = VERTEX_POINT ( 'NONE', #225 ) ;
+#28 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#29 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#30 = SHAPE_DEFINITION_REPRESENTATION ( #33, #35 ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#32 = ADVANCED_FACE ( 'NONE', ( #58 ), #119, .T. ) ;
+#33 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #145 ) ;
+#34 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#35 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'hammertriggerpinX2', ( #42, #239 ), #164 ) ;
+#36 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #71, 'design' ) ;
+#37 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#38 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #139 ) ;
+#39 =( CONVERSION_BASED_UNIT ( 'INCH', #123 ) LENGTH_UNIT ( ) NAMED_UNIT ( #84 ) );
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #231, .F. ) ;
+#42 = MANIFOLD_SOLID_BREP ( 'Chamfer1', #10 ) ;
+#43 = FILL_AREA_STYLE_COLOUR ( '', #53 ) ;
+#44 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#45 = ORIENTED_EDGE ( 'NONE', *, *, #202, .F. ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#47 = ADVANCED_FACE ( 'NONE', ( #72 ), #177, .T. ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #184, #98 ) ;
+#49 = CIRCLE ( 'NONE', #154, 0.04250000000000002400 ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #3, #20 ) ;
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #22, #13 ) ;
+#52 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #71 ) ;
+#53 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 6.429395695523605500E-018, -0.04250000000000002400 ) ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#56 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#57 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#58 = FACE_OUTER_BOUND ( 'NONE', #162, .T. ) ;
+#59 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#60 = FILL_AREA_STYLE ('',( #43 ) ) ;
+#61 = EDGE_CURVE ( 'NONE', #208, #180, #4, .T. ) ;
+#62 = SURFACE_SIDE_STYLE ('',( #101 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ;
+#64 = ADVANCED_FACE ( 'NONE', ( #121 ), #66, .T. ) ;
+#65 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #79 );
+#66 = CONICAL_SURFACE ( 'NONE', #48, 0.06250000000000000000, 0.7853981633974528300 ) ;
+#67 = EDGE_LOOP ( 'NONE', ( #222, #6, #2, #81 ) ) ;
+#68 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #193, #194 ) ;
+#69 = PRESENTATION_STYLE_ASSIGNMENT (( #167 ) ) ;
+#70 = PRODUCT_CONTEXT ( 'NONE', #139, 'mechanical' ) ;
+#71 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#72 = FACE_OUTER_BOUND ( 'NONE', #191, .T. ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.04250000000000002400 ) ) ;
+#74 = SURFACE_STYLE_USAGE ( .BOTH. , #62 ) ;
+#75 = EDGE_CURVE ( 'NONE', #27, #180, #133, .T. ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#77 = EDGE_LOOP ( 'NONE', ( #105, #131 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#79 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#80 = EDGE_CURVE ( 'NONE', #135, #143, #207, .T. ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ;
+#82 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #169 );
+#83 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#84 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#85 = SURFACE_STYLE_FILL_AREA ( #179 ) ;
+#86 =( CONVERSION_BASED_UNIT ( 'INCH', #65 ) LENGTH_UNIT ( ) NAMED_UNIT ( #18 ) );
+#87 = EDGE_CURVE ( 'NONE', #27, #135, #11, .T. ) ;
+#88 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#89 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#90 = FILL_AREA_STYLE_COLOUR ( '', #59 ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#93 = EDGE_CURVE ( 'NONE', #143, #180, #115, .T. ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#95 = PLANE ( 'NONE',  #50 ) ;
+#96 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#97 = EDGE_CURVE ( 'NONE', #155, #147, #49, .T. ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#99 = ADVANCED_FACE ( 'NONE', ( #17 ), #95, .F. ) ;
+#100 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ;
+#101 = SURFACE_STYLE_FILL_AREA ( #60 ) ;
+#102 = EDGE_CURVE ( 'NONE', #155, #135, #197, .T. ) ;
+#103 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #182, #152 ) ;
+#104 = STYLED_ITEM ( 'NONE', ( #111 ), #42 ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#106 = EDGE_LOOP ( 'NONE', ( #7, #244, #41, #204 ) ) ;
+#107 = EDGE_CURVE ( 'NONE', #208, #124, #242, .T. ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#109 =( CONVERSION_BASED_UNIT ( 'INCH', #82 ) LENGTH_UNIT ( ) NAMED_UNIT ( #183 ) );
+#110 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #104 ) ) ;
+#111 = PRESENTATION_STYLE_ASSIGNMENT (( #74 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( -0.7071067811865490200, 0.0000000000000000000, 0.7071067811865460200 ) ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#114 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#115 = CIRCLE ( 'NONE', #137, 0.06250000000000000000 ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, -0.06250000000000000000 ) ) ;
+#117 = DIRECTION ( 'NONE',  ( 0.7071067811865443500, 0.0000000000000000000, -0.7071067811865506800 ) ) ;
+#118 = ADVANCED_FACE ( 'NONE', ( #192 ), #134, .T. ) ;
+#119 = CONICAL_SURFACE ( 'NONE', #103, 0.04250000000000002400, 0.7853981633974461700 ) ;
+#120 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #160 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #86, #88, #89 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#121 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ;
+#122 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #230, #92 ) ;
+#123 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #163 );
+#124 = VERTEX_POINT ( 'NONE', #211 ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = PLANE ( 'NONE',  #223 ) ;
+#127 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ;
+#128 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 1.230000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
+#132 = ADVANCED_FACE ( 'NONE', ( #127 ), #126, .T. ) ;
+#133 = LINE ( 'NONE', #31, #138 ) ;
+#134 = CYLINDRICAL_SURFACE ( 'NONE', #161, 0.06250000000000000000 ) ;
+#135 = VERTEX_POINT ( 'NONE', #25 ) ;
+#136 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #216, #114 ) ;
+#137 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #29, #157 ) ;
+#138 = VECTOR ( 'NONE', #44, 39.37007874015748100 ) ;
+#139 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#140 = CIRCLE ( 'NONE', #68, 0.06250000000000000000 ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#142 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #128, #129 ) ;
+#143 = VERTEX_POINT ( 'NONE', #76 ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#145 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #151, #36 ) ;
+#146 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#147 = VERTEX_POINT ( 'NONE', #54 ) ;
+#148 = LINE ( 'NONE', #200, #212 ) ;
+#149 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #39, 'distance_accuracy_value', 'NONE');
+#150 = VECTOR ( 'NONE', #117, 39.37007874015748100 ) ;
+#151 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #23, .NOT_KNOWN. ) ;
+#152 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#153 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #109, 'distance_accuracy_value', 'NONE');
+#154 = AXIS2_PLACEMENT_3D ( 'NONE', #15, #146, #1 ) ;
+#155 = VERTEX_POINT ( 'NONE', #73 ) ;
+#156 = FACE_OUTER_BOUND ( 'NONE', #170, .T. ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ;
+#159 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #149 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #39, #28, #57 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#160 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #86, 'distance_accuracy_value', 'NONE');
+#161 = AXIS2_PLACEMENT_3D ( 'NONE', #16, #37, #221 ) ;
+#162 = EDGE_LOOP ( 'NONE', ( #91, #19, #158, #210 ) ) ;
+#163 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#164 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #153 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #109, #171, #249 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#165 = EDGE_LOOP ( 'NONE', ( #214, #108, #237, #21 ) ) ;
+#166 = VECTOR ( 'NONE', #219, 39.37007874015748100 ) ;
+#167 = SURFACE_STYLE_USAGE ( .BOTH. , #224 ) ;
+#168 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#169 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#170 = EDGE_LOOP ( 'NONE', ( #195, #63, #203, #227 ) ) ;
+#171 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#172 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ;
+#173 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #188, #199 ) ;
+#174 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #56, #26 ) ;
+#175 = DIRECTION ( 'NONE',  ( -0.7071067811865490200, 8.659560562354914400E-017, -0.7071067811865460200 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#177 = CONICAL_SURFACE ( 'NONE', #122, 0.06250000000000000000, 0.7853981633974528300 ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#179 = FILL_AREA_STYLE ('',( #90 ) ) ;
+#180 = VERTEX_POINT ( 'NONE', #226 ) ;
+#181 = CIRCLE ( 'NONE', #205, 0.04250000000000002400 ) ;
+#182 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#183 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#184 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#185 = EDGE_LOOP ( 'NONE', ( #100, #14 ) ) ;
+#186 = CIRCLE ( 'NONE', #51, 0.06250000000000000000 ) ;
+#187 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#188 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#190 = EDGE_CURVE ( 'NONE', #147, #27, #148, .T. ) ;
+#191 = EDGE_LOOP ( 'NONE', ( #234, #24, #45, #220 ) ) ;
+#192 = FACE_OUTER_BOUND ( 'NONE', #165, .T. ) ;
+#193 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#194 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.04249999999999949000 ) ) ;
+#197 = LINE ( 'NONE', #228, #246 ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 7.654042494670957500E-018, 0.06250000000000000000 ) ) ;
+#199 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 5.204748896376253500E-018, -0.04250000000000002400 ) ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#202 = EDGE_CURVE ( 'NONE', #180, #143, #140, .T. ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ;
+#205 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #168, #141 ) ;
+#206 = ADVANCED_FACE ( 'NONE', ( #172 ), #235, .T. ) ;
+#207 = LINE ( 'NONE', #78, #241 ) ;
+#208 = VERTEX_POINT ( 'NONE', #196 ) ;
+#209 = CIRCLE ( 'NONE', #174, 0.04249999999999949000 ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.429395695523573200E-018, 0.04249999999999949000 ) ) ;
+#212 = VECTOR ( 'NONE', #175, 39.37007874015748900 ) ;
+#213 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #231, .T. ) ;
+#215 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #187, #8 ) ;
+#216 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#217 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #104 ), #120 ) ;
+#218 = EDGE_CURVE ( 'NONE', #124, #143, #238, .T. ) ;
+#219 = DIRECTION ( 'NONE',  ( 0.7071067811865443500, 8.659560562354971100E-017, 0.7071067811865506800 ) ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
+#221 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#222 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ;
+#223 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #213, #9 ) ;
+#224 = SURFACE_SIDE_STYLE ('',( #85 ) ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( 1.230000000000000000, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#226 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000033300, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.04250000000000002400 ) ) ;
+#229 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #23 ) ) ;
+#230 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#231 = EDGE_CURVE ( 'NONE', #135, #27, #186, .T. ) ;
+#232 = ADVANCED_FACE ( 'NONE', ( #156 ), #5, .T. ) ;
+#233 = STYLED_ITEM ( 'NONE', ( #69 ), #35 ) ;
+#234 = ORIENTED_EDGE ( 'NONE', *, *, #240, .F. ) ;
+#235 = CONICAL_SURFACE ( 'NONE', #215, 0.04250000000000002400, 0.7853981633974461700 ) ;
+#236 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #233 ) ) ;
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #202, .T. ) ;
+#238 = LINE ( 'NONE', #198, #166 ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #12, #34 ) ;
+#240 = EDGE_CURVE ( 'NONE', #124, #208, #209, .T. ) ;
+#241 = VECTOR ( 'NONE', #96, 39.37007874015748100 ) ;
+#242 = CIRCLE ( 'NONE', #136, 0.04249999999999949000 ) ;
+#243 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #233 ), #159 ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( 1.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#246 = VECTOR ( 'NONE', #112, 39.37007874015748900 ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 1.230000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#248 = EDGE_CURVE ( 'NONE', #147, #155, #181, .T. ) ;
+#249 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+ENDSEC;
+END-ISO-10303-21;

Firearms/Grizzly_Handgun-Canadiangunnut/STEP/springpin.step

@@ -0,0 +1,266 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('springpin.STEP',
+    '2013-10-27T06:42:00',
+    ( 'Matt' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CIRCLE ( 'NONE', #84, 0.06250000000000000000 ) ;
+#2 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ;
+#4 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#5 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#6 = VECTOR ( 'NONE', #223, 39.37007874015748100 ) ;
+#7 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #162 );
+#8 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #42 ), #70 ) ;
+#9 = FILL_AREA_STYLE ('',( #48 ) ) ;
+#10 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #194, 'design' ) ;
+#11 = CIRCLE ( 'NONE', #90, 0.06250000000000000000 ) ;
+#12 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#13 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#14 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ;
+#16 = SURFACE_STYLE_FILL_AREA ( #9 ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#18 = EDGE_LOOP ( 'NONE', ( #98, #236 ) ) ;
+#19 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = FACE_OUTER_BOUND ( 'NONE', #206, .T. ) ;
+#21 = FACE_OUTER_BOUND ( 'NONE', #201, .T. ) ;
+#22 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#23 = ADVANCED_FACE ( 'NONE', ( #43 ), #207, .T. ) ;
+#24 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#25 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#26 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#27 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #167 ) ) ;
+#28 = CIRCLE ( 'NONE', #80, 0.04249999999999976000 ) ;
+#29 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 6.429395695523605500E-018, -0.04250000000000002400 ) ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#31 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #167, .NOT_KNOWN. ) ;
+#32 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#33 =( CONVERSION_BASED_UNIT ( 'INCH', #180 ) LENGTH_UNIT ( ) NAMED_UNIT ( #228 ) );
+#34 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #31, #10 ) ;
+#35 = ADVANCED_FACE ( 'NONE', ( #184 ), #160, .T. ) ;
+#36 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#37 = AXIS2_PLACEMENT_3D ( 'NONE', #192, #237, #139 ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
+#39 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #42 ) ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 7.654042494670957500E-018, 0.06250000000000000000 ) ) ;
+#42 = STYLED_ITEM ( 'NONE', ( #219 ), #127 ) ;
+#43 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#44 = PRESENTATION_STYLE_ASSIGNMENT (( #245 ) ) ;
+#45 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#46 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #63 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #140, #137, #133 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#47 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#48 = FILL_AREA_STYLE_COLOUR ( '', #25 ) ;
+#49 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #214, #216 ) ;
+#50 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ;
+#51 = CYLINDRICAL_SURFACE ( 'NONE', #61, 0.06250000000000000000 ) ;
+#52 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#53 = SURFACE_STYLE_USAGE ( .BOTH. , #55 ) ;
+#54 = ADVANCED_FACE ( 'NONE', ( #144 ), #156, .T. ) ;
+#55 = SURFACE_SIDE_STYLE ('',( #248 ) ) ;
+#56 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #169 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #235, #233, #225 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#57 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #73 ), #56 ) ;
+#58 = CONICAL_SURFACE ( 'NONE', #93, 0.06250000000000000000, 0.7853981633974492800 ) ;
+#59 = LINE ( 'NONE', #234, #82 ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 0.6799999999999998300, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#61 = AXIS2_PLACEMENT_3D ( 'NONE', #47, #32, #130 ) ;
+#62 = EDGE_LOOP ( 'NONE', ( #150, #175, #183, #97 ) ) ;
+#63 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #140, 'distance_accuracy_value', 'NONE');
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#65 = VERTEX_POINT ( 'NONE', #125 ) ;
+#66 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = VECTOR ( 'NONE', #221, 39.37007874015748100 ) ;
+#68 = CONICAL_SURFACE ( 'NONE', #49, 0.04250000000000002400, 0.7853981633974461700 ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.6799999999999998300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#70 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #91 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #33, #14, #13 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#71 = LINE ( 'NONE', #212, #6 ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 5.204748896376253500E-018, -0.04250000000000002400 ) ) ;
+#73 = STYLED_ITEM ( 'NONE', ( #44 ), #218 ) ;
+#74 = CIRCLE ( 'NONE', #83, 0.04250000000000002400 ) ;
+#75 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#77 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #73 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.04249999999999976000 ) ) ;
+#79 = FILL_AREA_STYLE ('',( #195 ) ) ;
+#80 = AXIS2_PLACEMENT_3D ( 'NONE', #76, #75, #52 ) ;
+#81 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#82 = VECTOR ( 'NONE', #222, 39.37007874015748100 ) ;
+#83 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #105, #104 ) ;
+#84 = AXIS2_PLACEMENT_3D ( 'NONE', #158, #134, #132 ) ;
+#85 = VERTEX_POINT ( 'NONE', #124 ) ;
+#86 = DIRECTION ( 'NONE',  ( -0.7071067811865490200, 0.0000000000000000000, 0.7071067811865460200 ) ) ;
+#87 = LINE ( 'NONE', #232, #67 ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.04250000000000002400 ) ) ;
+#89 = DIRECTION ( 'NONE',  ( -0.7071067811865490200, 8.659560562354914400E-017, -0.7071067811865460200 ) ) ;
+#90 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #190, #164 ) ;
+#91 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #33, 'distance_accuracy_value', 'NONE');
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #152, .F. ) ;
+#93 = AXIS2_PLACEMENT_3D ( 'NONE', #17, #22, #246 ) ;
+#94 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#95 = EDGE_LOOP ( 'NONE', ( #92, #205, #249, #108 ) ) ;
+#96 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #243, #242 ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ;
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #188, .T. ) ;
+#99 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#100 = AXIS2_PLACEMENT_3D ( 'NONE', #19, #5, #4 ) ;
+#101 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #26, #24 ) ;
+#103 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #101, #99 ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#105 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #66, #64 ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ;
+#109 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #81 ) ;
+#110 = VECTOR ( 'NONE', #89, 39.37007874015748900 ) ;
+#111 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #146, #155 ) ;
+#112 = DIRECTION ( 'NONE',  ( 0.7071067811865468000, 8.659560562354942700E-017, 0.7071067811865483500 ) ) ;
+#113 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ;
+#114 = PLANE ( 'NONE',  #103 ) ;
+#115 = AXIS2_PLACEMENT_3D ( 'NONE', #174, #121, #176 ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
+#117 = LINE ( 'NONE', #41, #126 ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#119 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #34 ) ;
+#120 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #185, #199 ) ;
+#121 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = ADVANCED_FACE ( 'NONE', ( #241 ), #193, .T. ) ;
+#123 = CIRCLE ( 'NONE', #96, 0.06250000000000000000 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.04250000000000002400 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#126 = VECTOR ( 'NONE', #112, 39.37007874015748100 ) ;
+#127 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'springpin', ( #218, #37 ), #46 ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( 0.6799999999999998300, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#129 = AXIS2_PLACEMENT_3D ( 'NONE', #211, #178, #186 ) ;
+#130 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#131 = LINE ( 'NONE', #72, #110 ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#133 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#134 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#135 = EDGE_LOOP ( 'NONE', ( #202, #38, #166, #163 ) ) ;
+#136 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #194 ) ;
+#137 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#138 = ADVANCED_FACE ( 'NONE', ( #189 ), #114, .F. ) ;
+#139 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#140 =( CONVERSION_BASED_UNIT ( 'INCH', #7 ) LENGTH_UNIT ( ) NAMED_UNIT ( #2 ) );
+#141 = VECTOR ( 'NONE', #86, 39.37007874015748900 ) ;
+#142 = EDGE_CURVE ( 'NONE', #85, #148, #230, .T. ) ;
+#143 = EDGE_CURVE ( 'NONE', #148, #200, #153, .T. ) ;
+#144 = FACE_OUTER_BOUND ( 'NONE', #135, .T. ) ;
+#145 = EDGE_CURVE ( 'NONE', #210, #200, #131, .T. ) ;
+#146 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#147 = EDGE_CURVE ( 'NONE', #210, #85, #168, .T. ) ;
+#148 = VERTEX_POINT ( 'NONE', #60 ) ;
+#149 = EDGE_CURVE ( 'NONE', #198, #204, #226, .T. ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
+#152 = EDGE_CURVE ( 'NONE', #198, #215, #117, .T. ) ;
+#153 = CIRCLE ( 'NONE', #106, 0.06250000000000000000 ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#156 = CYLINDRICAL_SURFACE ( 'NONE', #111, 0.06250000000000000000 ) ;
+#157 = CLOSED_SHELL ( 'NONE', ( #224, #165, #54, #209, #23, #138, #35, #122 ) ) ;
+#158 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#159 = EDGE_CURVE ( 'NONE', #65, #215, #123, .T. ) ;
+#160 = CONICAL_SURFACE ( 'NONE', #129, 0.06250000000000000000, 0.7853981633974492800 ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.429395695523590100E-018, 0.04249999999999976000 ) ) ;
+#162 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ;
+#164 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = ADVANCED_FACE ( 'NONE', ( #113 ), #58, .T. ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #159, .T. ) ;
+#167 = PRODUCT ( 'springpin', 'springpin', '', ( #196 ) ) ;
+#168 = CIRCLE ( 'NONE', #102, 0.04250000000000002400 ) ;
+#169 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #235, 'distance_accuracy_value', 'NONE');
+#170 = EDGE_CURVE ( 'NONE', #204, #65, #59, .T. ) ;
+#171 = EDGE_CURVE ( 'NONE', #200, #65, #87, .T. ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#175 = ORIENTED_EDGE ( 'NONE', *, *, #152, .T. ) ;
+#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#177 = EDGE_CURVE ( 'NONE', #148, #215, #71, .T. ) ;
+#178 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#180 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #36 );
+#181 = EDGE_CURVE ( 'NONE', #200, #148, #11, .T. ) ;
+#182 = EDGE_CURVE ( 'NONE', #215, #65, #1, .T. ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #159, .F. ) ;
+#184 = FACE_OUTER_BOUND ( 'NONE', #95, .T. ) ;
+#185 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#187 = EDGE_CURVE ( 'NONE', #85, #210, #74, .T. ) ;
+#188 = EDGE_CURVE ( 'NONE', #204, #198, #28, .T. ) ;
+#189 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ;
+#190 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 0.6799999999999998300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#193 = CONICAL_SURFACE ( 'NONE', #115, 0.04250000000000002400, 0.7853981633974461700 ) ;
+#194 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#195 = FILL_AREA_STYLE_COLOUR ( '', #45 ) ;
+#196 = PRODUCT_CONTEXT ( 'NONE', #81, 'mechanical' ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
+#198 = VERTEX_POINT ( 'NONE', #161 ) ;
+#199 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#200 = VERTEX_POINT ( 'NONE', #128 ) ;
+#201 = EDGE_LOOP ( 'NONE', ( #50, #217, #151, #3 ) ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #181, .T. ) ;
+#204 = VERTEX_POINT ( 'NONE', #78 ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #188, .F. ) ;
+#206 = EDGE_LOOP ( 'NONE', ( #239, #203, #213, #220 ) ) ;
+#207 = PLANE ( 'NONE',  #120 ) ;
+#208 = SHAPE_DEFINITION_REPRESENTATION ( #119, #127 ) ;
+#209 = ADVANCED_FACE ( 'NONE', ( #20 ), #51, .T. ) ;
+#210 = VERTEX_POINT ( 'NONE', #29 ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 0.0000000000000000000, 0.06250000000000000000 ) ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ;
+#214 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#215 = VERTEX_POINT ( 'NONE', #12 ) ;
+#216 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;
+#218 = MANIFOLD_SOLID_BREP ( 'Chamfer1', #157 ) ;
+#219 = PRESENTATION_STYLE_ASSIGNMENT (( #53 ) ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ;
+#221 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#222 = DIRECTION ( 'NONE',  ( 0.7071067811865468000, 0.0000000000000000000, -0.7071067811865483500 ) ) ;
+#223 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#224 = ADVANCED_FACE ( 'NONE', ( #21 ), #68, .T. ) ;
+#225 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#226 = CIRCLE ( 'NONE', #100, 0.04249999999999976000 ) ;
+#227 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #238 );
+#228 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#229 = EDGE_LOOP ( 'NONE', ( #173, #197, #172, #240 ) ) ;
+#230 = LINE ( 'NONE', #88, #141 ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #116, #15 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( 0.6999999999999999600, 7.654042494670957500E-018, -0.06250000000000000000 ) ) ;
+#233 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#234 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, -0.06250000000000000000 ) ) ;
+#235 =( CONVERSION_BASED_UNIT ( 'INCH', #227 ) LENGTH_UNIT ( ) NAMED_UNIT ( #94 ) );
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ;
+#237 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#238 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#239 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #181, .F. ) ;
+#241 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#243 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.02000000000000019800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#245 = SURFACE_STYLE_USAGE ( .BOTH. , #247 ) ;
+#246 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#247 = SURFACE_SIDE_STYLE ('',( #16 ) ) ;
+#248 = SURFACE_STYLE_FILL_AREA ( #79 ) ;
+#249 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Grizzly_Handgun-Canadiangunnut/STEP/springpinbushing.step

@@ -0,0 +1,240 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('springpinbushing.STEP',
+    '2013-10-27T06:41:51',
+    ( 'Matt' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #38, #223 ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #37, .F. ) ;
+#3 = SURFACE_STYLE_USAGE ( .BOTH. , #4 ) ;
+#4 = SURFACE_SIDE_STYLE ('',( #205 ) ) ;
+#5 = CIRCLE ( 'NONE', #217, 0.08000000000000000200 ) ;
+#6 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #214, 'design' ) ;
+#7 = FILL_AREA_STYLE ('',( #53 ) ) ;
+#8 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#9 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
+#11 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#12 = VERTEX_POINT ( 'NONE', #200 ) ;
+#13 = CIRCLE ( 'NONE', #118, 0.1200000000000000000 ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #34, .T. ) ;
+#16 = EDGE_CURVE ( 'NONE', #41, #20, #113, .T. ) ;
+#17 = EDGE_CURVE ( 'NONE', #191, #176, #108, .T. ) ;
+#18 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#19 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #9 ) ;
+#20 = VERTEX_POINT ( 'NONE', #222 ) ;
+#21 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#22 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #135 );
+#23 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
+#25 =( CONVERSION_BASED_UNIT ( 'INCH', #31 ) LENGTH_UNIT ( ) NAMED_UNIT ( #11 ) );
+#26 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#27 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.08000000000000000200 ) ) ;
+#29 = ADVANCED_FACE ( 'NONE', ( #129 ), #91, .F. ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #16, .T. ) ;
+#31 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #26 );
+#32 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#33 = EDGE_LOOP ( 'NONE', ( #2, #183, #62, #14 ) ) ;
+#34 = EDGE_CURVE ( 'NONE', #12, #50, #85, .T. ) ;
+#35 = VERTEX_POINT ( 'NONE', #95 ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#37 = EDGE_CURVE ( 'NONE', #67, #35, #106, .T. ) ;
+#38 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.08000000000000000200 ) ) ;
+#40 = EDGE_CURVE ( 'NONE', #41, #12, #119, .T. ) ;
+#41 = VERTEX_POINT ( 'NONE', #204 ) ;
+#42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
+#44 = ADVANCED_FACE ( 'NONE', ( #100 ), #54, .T. ) ;
+#45 = EDGE_CURVE ( 'NONE', #191, #67, #5, .T. ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
+#47 = PRODUCT_CONTEXT ( 'NONE', #9, 'mechanical' ) ;
+#48 = SURFACE_STYLE_FILL_AREA ( #138 ) ;
+#49 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'springpinbushing', ( #60, #159 ), #177 ) ;
+#50 = VERTEX_POINT ( 'NONE', #166 ) ;
+#51 = EDGE_CURVE ( 'NONE', #20, #41, #13, .T. ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ;
+#53 = FILL_AREA_STYLE_COLOUR ( '', #156 ) ;
+#54 = CYLINDRICAL_SURFACE ( 'NONE', #216, 0.1200000000000000000 ) ;
+#55 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #104, .T. ) ;
+#59 = PLANE ( 'NONE',  #180 ) ;
+#60 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #84 ) ;
+#61 = EDGE_CURVE ( 'NONE', #50, #12, #105, .T. ) ;
+#62 = ORIENTED_EDGE ( 'NONE', *, *, #17, .T. ) ;
+#63 = EDGE_CURVE ( 'NONE', #35, #176, #197, .T. ) ;
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#65 = PRESENTATION_STYLE_ASSIGNMENT (( #136 ) ) ;
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = VERTEX_POINT ( 'NONE', #126 ) ;
+#68 = EDGE_CURVE ( 'NONE', #67, #191, #203, .T. ) ;
+#69 = EDGE_CURVE ( 'NONE', #176, #35, #199, .T. ) ;
+#70 = EDGE_LOOP ( 'NONE', ( #10, #179, #58, #46 ) ) ;
+#71 = VECTOR ( 'NONE', #185, 39.37007874015748100 ) ;
+#72 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#73 = CYLINDRICAL_SURFACE ( 'NONE', #174, 0.08000000000000000200 ) ;
+#74 = PLANE ( 'NONE',  #190 ) ;
+#75 = EDGE_LOOP ( 'NONE', ( #27, #212, #139, #220 ) ) ;
+#76 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.1200000000000000000 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#81 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#82 = VECTOR ( 'NONE', #195, 39.37007874015748100 ) ;
+#83 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #25, 'distance_accuracy_value', 'NONE');
+#84 = CLOSED_SHELL ( 'NONE', ( #29, #103, #116, #157, #44, #178 ) ) ;
+#85 = CIRCLE ( 'NONE', #142, 0.1200000000000000000 ) ;
+#86 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #144, 'distance_accuracy_value', 'NONE');
+#88 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#89 = EDGE_LOOP ( 'NONE', ( #131, #24, #15, #169 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = CYLINDRICAL_SURFACE ( 'NONE', #219, 0.08000000000000000200 ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#93 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.797174393178827100E-018, -0.08000000000000000200 ) ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#98 = EDGE_LOOP ( 'NONE', ( #163, #94 ) ) ;
+#99 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#100 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 = EDGE_LOOP ( 'NONE', ( #143, #52 ) ) ;
+#103 = ADVANCED_FACE ( 'NONE', ( #194 ), #145, .T. ) ;
+#104 = EDGE_CURVE ( 'NONE', #20, #50, #161, .T. ) ;
+#105 = CIRCLE ( 'NONE', #202, 0.1200000000000000000 ) ;
+#106 = LINE ( 'NONE', #192, #71 ) ;
+#107 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#108 = LINE ( 'NONE', #184, #124 ) ;
+#109 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#110 = FACE_OUTER_BOUND ( 'NONE', #33, .T. ) ;
+#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#113 = CIRCLE ( 'NONE', #1, 0.1200000000000000000 ) ;
+#114 = FACE_OUTER_BOUND ( 'NONE', #133, .T. ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#116 = ADVANCED_FACE ( 'NONE', ( #121, #165 ), #74, .T. ) ;
+#117 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #181 );
+#118 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #147, #140 ) ;
+#119 = LINE ( 'NONE', #182, #82 ) ;
+#120 = FACE_BOUND ( 'NONE', #102, .T. ) ;
+#121 = FACE_OUTER_BOUND ( 'NONE', #146, .T. ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#123 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#124 = VECTOR ( 'NONE', #93, 39.37007874015748100 ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 9.797174393178827100E-018, -0.08000000000000000200 ) ) ;
+#127 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#128 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#129 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
+#130 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#131 = ORIENTED_EDGE ( 'NONE', *, *, #16, .F. ) ;
+#132 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #158 ) ;
+#133 = EDGE_LOOP ( 'NONE', ( #43, #208 ) ) ;
+#134 =( CONVERSION_BASED_UNIT ( 'INCH', #22 ) LENGTH_UNIT ( ) NAMED_UNIT ( #8 ) );
+#135 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#136 = SURFACE_STYLE_USAGE ( .BOTH. , #137 ) ;
+#137 = SURFACE_SIDE_STYLE ('',( #48 ) ) ;
+#138 = FILL_AREA_STYLE ('',( #168 ) ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
+#140 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#141 = PRODUCT ( 'springpinbushing', 'springpinbushing', '', ( #47 ) ) ;
+#142 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #188, #187 ) ;
+#143 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
+#144 =( CONVERSION_BASED_UNIT ( 'INCH', #117 ) LENGTH_UNIT ( ) NAMED_UNIT ( #130 ) );
+#145 = CYLINDRICAL_SURFACE ( 'NONE', #193, 0.1200000000000000000 ) ;
+#146 = EDGE_LOOP ( 'NONE', ( #207, #30 ) ) ;
+#147 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#149 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #141 ) ) ;
+#151 = VECTOR ( 'NONE', #76, 39.37007874015748100 ) ;
+#152 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#153 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #141, .NOT_KNOWN. ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#156 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#157 = ADVANCED_FACE ( 'NONE', ( #114, #120 ), #59, .F. ) ;
+#158 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #153, #6 ) ;
+#159 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #107, #86 ) ;
+#160 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #134, 'distance_accuracy_value', 'NONE');
+#161 = LINE ( 'NONE', #77, #151 ) ;
+#162 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ;
+#164 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #87 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #144, #162, #32 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#165 = FACE_BOUND ( 'NONE', #98, .T. ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1200000000000000000 ) ) ;
+#167 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #171 ), #164 ) ;
+#168 = FILL_AREA_STYLE_COLOUR ( '', #18 ) ;
+#169 = ORIENTED_EDGE ( 'NONE', *, *, #104, .F. ) ;
+#170 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #171 ) ) ;
+#171 = STYLED_ITEM ( 'NONE', ( #175 ), #49 ) ;
+#172 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#174 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #79, #42 ) ;
+#175 = PRESENTATION_STYLE_ASSIGNMENT (( #3 ) ) ;
+#176 = VERTEX_POINT ( 'NONE', #39 ) ;
+#177 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #83 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #25, #23, #21 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#178 = ADVANCED_FACE ( 'NONE', ( #110 ), #73, .F. ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
+#180 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #155, #55 ) ;
+#181 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 1.469576158976823700E-017, -0.1200000000000000000 ) ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.08000000000000000200 ) ) ;
+#185 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#187 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#188 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#190 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #66, #64 ) ;
+#191 = VERTEX_POINT ( 'NONE', #28 ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 9.797174393178827100E-018, -0.08000000000000000200 ) ) ;
+#193 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #109, #92 ) ;
+#194 = FACE_OUTER_BOUND ( 'NONE', #89, .T. ) ;
+#195 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#196 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #88, #81 ) ;
+#197 = CIRCLE ( 'NONE', #201, 0.08000000000000000200 ) ;
+#198 = AXIS2_PLACEMENT_3D ( 'NONE', #101, #99, #97 ) ;
+#199 = CIRCLE ( 'NONE', #196, 0.08000000000000000200 ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.469576158976823700E-017, -0.1200000000000000000 ) ) ;
+#201 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #112, #111 ) ;
+#202 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #123, #122 ) ;
+#203 = CIRCLE ( 'NONE', #198, 0.08000000000000000200 ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 1.469576158976823700E-017, -0.1200000000000000000 ) ) ;
+#205 = SURFACE_STYLE_FILL_AREA ( #7 ) ;
+#206 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #160 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #134, #128, #127 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #34, .F. ) ;
+#209 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #211 ), #206 ) ;
+#210 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #211 ) ) ;
+#211 = STYLED_ITEM ( 'NONE', ( #65 ), #60 ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #37, .T. ) ;
+#213 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #214 ) ;
+#214 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#215 = SHAPE_DEFINITION_REPRESENTATION ( #132, #49 ) ;
+#216 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #172, #186 ) ;
+#217 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #152, #149 ) ;
+#218 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#219 = AXIS2_PLACEMENT_3D ( 'NONE', #218, #72, #221 ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #17, .F. ) ;
+#221 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 0.2500000000000000000, 0.0000000000000000000, 0.1200000000000000000 ) ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;